diff -Nru linux-4.9.13/debian/changelog linux-4.9-4.9.13/debian/changelog --- linux-4.9.13/debian/changelog 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/changelog 2017-03-12 01:46:12.000000000 +0000 @@ -1,3 +1,124 @@ +linux-4.9 (4.9.13-1+rpi1) jessie-staging; urgency=medium + + [Changes from 3.18.5-1~exp1+rpi1 or earlier] + [Vagrant Cascadian ] + * disable other armhf variants. + * disable other armhf debian-installer variants. + * attempt to enable debian-installer udebs for rpi. + * try harder to enable debian-installer udebs. + [Peter Michael Green] + * Include patches to support RaspberryPI from: + https://github.com/raspberrypi/linux.git + branch: rpi-3.16.y + * add script to automatically regenerate rpi patches from git repos + * add hack to allow upgrading of kernel located on fat partition to succeed + * Fix clean target + * Merge config changes from 3.10.11-1+rpi4 packaging. + * Build hardware rng module. + * Build pps module for gps timeserver support. + * Disable fat modules udeb because we are compiling fat support in. + * Disable patches that conflict with or duplicate rpi patches + - features/all/cgroups-Allow-memory-cgroup-support-to-be-included-b.patch + * Add various kernel config changes that the raspberry pi foundation made between + 3.14 and 3.16 kernel series. + * Changes forward ported from 3.12 packaging + + optimise update-rpi-patches script a bit (reduce the number of calls to + quilt refresh). + + apply GPIO related configuration changes requested by Diederik + (LP: 1403865) + * Rename source package and don't build libc-dev package + * Add support for raspberry pi 2 + + also turn on some stuff for pi1 that was noticed during the pi1/pi2 + config comparison. + + [Changes introduced in 3.18.5-1~exp1+rpi10 by Peter Michael Green] + * Fix kernel configuration for keyboard + * split out config.rpix containing config containing settings that + are used for both pi1 and pi2. + + [Changes introduced in 3.18.5-1~exp1+rpi11 by Peter Michael Green] + * add copyright header to mkknling. + * enable I2S modules now we have device tree support. + + [Changes introduced in 3.18.5-1~exp1+rpi17 by Peter Micheal Green] + * Add RTC drivers requested by Diederik + * Update mmc/dma settings to hopefully fix build failure. + + [Changes introduced in 4.4.6-1+rpi1 by Peter Michael Green] + * Disable patches that conflict or potentially conflict with rpi patches. + + all patches under features/arm/rpi/ + + features/all/cgroups-Allow-memory-cgroup-support-to-be-included-b.patch + + bugfix/all/uas-fix-high-order-alloc.patch + + bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch + * Disable rpi_9999_other_changes.patch, it seems to contain only garbage. + * add device tree trailer using scripts/mkknlimg (previously we used our own copy of mkknlimg) + + + [changes brought forward from 4.4.6-1+rpi2 by Peter Michael Green at Sun, 17 Apr 2016 01:49:37 +0000] + * Add a load of rpf config settings to try and fix boot failure + (if it works a cleanup process will be started afterwards) + + [changes brought forward from 4.4.6-1+rpi3 by Peter Michael Green at Tue, 19 Apr 2016 14:24:19 +0000] + * Don't specity an ext3-modules udeb for rpi and rpi2 flavors, debian no + longer seems to provide a template for it + * Don't specity an ext2-modules udeb for rpi and rpi2 flavors, debian no + longer seems to provide a template for it + * Remove some of the rpf config settings added in 4.4.6-1+rpi2 + + [changes brought forward from 4.4.6-1+rpi4 by Peter Michael Green at Thu, 21 Apr 2016 21:08:58 +0000] + * With previous version rpi2 kernel booted but rpi kernel didn't. + try some more config changes. + + [changes brought forward from 4.4.6-1+rpi5 by Peter Michael Green at Tue, 26 Apr 2016 15:34:06 +0000] + * Unshelve some more config settings. + + [changes brought forward from 4.4.6-1+rpi6 by Peter Michael Green at Thu, 28 Apr 2016 13:30:55 +0000] + * Unshelve some more config settings. + + [changes brought forward from 4.4.6-1+rpi7 by Peter Michael Green at Thu, 28 Apr 2016 18:09:56 +0000] + * unshelve some more config settings. + + [changes brought forward from 4.4.6-1+rpi8 by Peter Michael Green at Thu, 28 Apr 2016 23:00:11 +0000] + * unshelve yet more config settings. + + [changes brought forward from 4.4.6-1+rpi9 by Peter Michael Green at Sat, 30 Apr 2016 23:47:50 +0000] + * Unshelve remaining config settings (this should make us equivilent to +rpi2) + + [changes brought forward from 4.4.6-1+rpi10 by Peter Michael Green at Sun, 01 May 2016 21:47:14 +0000] + * Remove config settings unshelved in +rpi7 and +rpi8 + + [changes brought forward from 4.4.6-1+rpi11 by Peter Michael Green at Mon, 02 May 2016 01:51:47 +0000] + * Remove settings unshelved in +rpi5 and +rpi6 + + [changes brought forward from 4.4.6-1+rpi12 by Peter Michael Green at Mon, 02 May 2016 14:59:12 +0000] + * Merge config.test into config.rpi + * Allow loop drivers to be built as modules so udeb build succeeds. + * Remove CONFIG_FIRMWARE_IN_KERNEL from config.rpi + + [changes brought forward from 4.4.6-1+rpi13 by Peter Michael Green at Tue, 03 May 2016 02:16:27 +0000] + * Remove more stuff from config.rpi because it's breaking udeb generation + + Remove "# CONFIG_CRYPTO_BLOWFISH is not set" + + Remove "# CONFIG_CRYPTO_SERPENT is not set" + + Remove "# CONFIG_CRYPTO_TWOFISH is not set" + + Remove "# CONFIG_MINIX_FS is not set" + + [changes brought forward from 4.4.6-1+rpi14 by Peter Michael Green at Thu, 05 May 2016 19:38:10 +0000] + * Add a couple of settings to the rpi2 config based on looking at difference + between foundation rpi and rpi2 configs. + * Move a bunch of stuff from rpi config to rpix config. + + [changes introduced in 4.9.13-1+rpi1 by Peter Michael Green] + * Move to new git rebased based strategy for generating rpi patches + * Cleanup some stuff dgit doesn't like in clean target. + * Disable kernel signing. + * Deversion debhelper build-dependency. + * swap order of asciidoc and asciidoc-base alternative build-depends. + * Deversion flex build-dependency + * Deversion libbabeltrace-dev and libbabeltrace-ctf-dev build-dependencys + * Build with gcc-4.9 + + -- Peter Michael Green Tue, 07 Mar 2017 02:27:05 +0000 + linux (4.9.13-1) unstable; urgency=medium * New upstream stable update: diff -Nru linux-4.9.13/debian/config/armhf/config.rpi linux-4.9-4.9.13/debian/config/armhf/config.rpi --- linux-4.9.13/debian/config/armhf/config.rpi 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/config.rpi 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,106 @@ +## +## file: arch/arm/Kconfig + +#pi1 specific stuff + +CONFIG_ARCH_BCM2708=y +CONFIG_BCM2708_DT=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_AES_ARM=m + +#Changes added during the move from 3.18 to 4.4 (bb6b4b6b331680bed807605685572d727638bb51 to af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9)-- ../newconfig-rpix 2016-04-14 18:41:20.517825338 +0000 +#There are almost certainly more here than strictly needed but I got fed up with bisection. + +# CONFIG_CPU_SW_DOMAIN_PAN is not set +# CONFIG_ATAGS is not set +CONFIG_IPV6=m +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_BT_6LOWPAN=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_MTD=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_NAND=m +CONFIG_MTD_UBI=m +CONFIG_OF_CONFIGFS=y +CONFIG_TI_ST=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_QCA7000=m +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_IEEE802154_AT86RF230=m +CONFIG_IEEE802154_MRF24J40=m +CONFIG_IEEE802154_CC2520=m +CONFIG_JOYSTICK_RPISENSE=m +CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_RPI_FT5406=m +CONFIG_BRCM_CHAR_DRIVERS=y +CONFIG_BCM_VC_CMA=y +CONFIG_BCM_VCIO=y +CONFIG_BCM_VC_SM=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=0 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_BCM2835_WDT=m +CONFIG_DRM=m +CONFIG_DRM_VC4=m +CONFIG_FB_SSD1307=m +CONFIG_FB_RPISENSE=m +CONFIG_BACKLIGHT_RPI=m +CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_BCM2708_SOC_RASPIDAC3=m +CONFIG_SND_SOC_ADAU1701=m +CONFIG_USB_DWC2=m +CONFIG_USB_GADGET=m +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_ACM_MS=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_HID=m +CONFIG_USB_G_WEBCAM=m +CONFIG_DMA_BCM2835=y +CONFIG_FB_TFT_ILI9163=m +CONFIG_MAILBOX=y +CONFIG_BCM2835_MBOX=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_KFIFO_BUF=m +CONFIG_MCP320X=m +CONFIG_MCP3422=m +CONFIG_DHT11=m +CONFIG_PWM_BCM2835=m +CONFIG_PWM_PCA9685=m +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_F2FS_FS=y +CONFIG_OVERLAY_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_SUMMARY=y +CONFIG_UBIFS_FS=m +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_AES_ARM=m + diff -Nru linux-4.9.13/debian/config/armhf/config.rpi2 linux-4.9-4.9.13/debian/config/armhf/config.rpi2 --- linux-4.9.13/debian/config/armhf/config.rpi2 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/config.rpi2 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,94 @@ +## +## file: arch/arm/Kconfig + +#pi2 specific stuff +CONFIG_ARCH_BCM2709=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_BCM2709_DT=y +CONFIG_SMP=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_VMSPLIT_2G=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_GPIO_BCM_VIRT=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA512_ARM_NEON=m +CONFIG_CRYPTO_AES_ARM_BS=m + +#Changes added during the move from 3.18 to 4.4 (bb6b4b6b331680bed807605685572d727638bb51 to af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9) +# CONFIG_CPU_SW_DOMAIN_PAN is not set +# CONFIG_ATAGS is not set +CONFIG_IPV6=m +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_BT_6LOWPAN=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_MTD=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_NAND=m +CONFIG_MTD_UBI=m +CONFIG_OF_CONFIGFS=y +CONFIG_TI_ST=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_QCA7000=m +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_IEEE802154_AT86RF230=m +CONFIG_IEEE802154_MRF24J40=m +CONFIG_IEEE802154_CC2520=m +CONFIG_JOYSTICK_RPISENSE=m +CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_RPI_FT5406=m +CONFIG_BRCM_CHAR_DRIVERS=y +CONFIG_BCM_VC_CMA=y +CONFIG_BCM_VCIO=y +CONFIG_BCM_VC_SM=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=0 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_GPIO_BCM_VIRT=y +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_BCM2835_WDT=m +CONFIG_DRM=m +CONFIG_DRM_VC4=m +CONFIG_FB_SSD1307=m +CONFIG_FB_RPISENSE=m +CONFIG_BACKLIGHT_RPI=m +CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_BCM2708_SOC_RASPIDAC3=m +CONFIG_SND_SOC_ADAU1701=m +CONFIG_DMA_BCM2835=y +CONFIG_FB_TFT_ILI9163=m +CONFIG_MAILBOX=y +CONFIG_BCM2835_MBOX=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_KFIFO_BUF=m +CONFIG_MCP320X=m +CONFIG_MCP3422=m +CONFIG_DHT11=m +CONFIG_PWM_BCM2835=m +CONFIG_PWM_PCA9685=m +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_F2FS_FS=y +CONFIG_OVERLAY_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_SUMMARY=y +CONFIG_UBIFS_FS=m +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_AES_ARM_BS=m diff -Nru linux-4.9.13/debian/config/armhf/config.rpix linux-4.9-4.9.13/debian/config/armhf/config.rpix --- linux-4.9.13/debian/config/armhf/config.rpix 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/config.rpix 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,829 @@ +#configuration settings shared between pi1 and pi2 kernels. + +# MMC settings from bcmrpi_defconfig rev f75f5d96ae8a8e2b5f553f7d02aac8bf1907376 +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_BCM2835=y +CONFIG_MMC_BCM2835_DMA=y +CONFIG_MMC_BCM2835_SDHOST=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SPI=m + +# DMA settings from bcmrpi_defconfig rev f75f5d96ae8a8e2b5f553f7d02aac8bf1907376 +CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2708=y + +# +# Boot options +# +CONFIG_CMDLINE_FROM_BOOTLOADER=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y + +# Serial Console +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y + +CONFIG_TTY_PRINTK=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM2708=m +CONFIG_I2C_BCM2708_BAUDRATE=100000 + +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BCM2708=m + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m + +# +# Enable Device Drivers -> PPS to see the PTP clock options. +# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +CONFIG_THERMAL=y +CONFIG_THERMAL_BCM2835=y + +CONFIG_WATCHDOG=y + +# +# Watchdog Device Drivers +# +CONFIG_BCM2708_WDT=m + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +CONFIG_VIDEO_CX25840=m + +# +# MPEG video encoders +# +CONFIG_VIDEO_CX2341X=m + +# +# Graphics support +# +CONFIG_FB=y +##CONFIG_FB_CFB_FILLRECT=y +##CONFIG_FB_CFB_COPYAREA=y +##CONFIG_FB_CFB_IMAGEBLIT=y + +# +# Frame buffer hardware drivers +# +CONFIG_FB_BCM2708=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +## CONFIG_FONTS is not set +##CONFIG_FONT_8x8=y +##CONFIG_FONT_8x16=y + +# Sound +CONFIG_SND_BCM2835=m + +# +# File systems +# +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y + +CONFIG_USB=y + +# USB controller for RPI? +CONFIG_USB_DWCOTG=y + +# USB network for RPI? +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y + +# Hopefully make SD card status LED work +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_CLASS=y + +# Build in fat related stuff +CONFIG_VFAT_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_UTF8=y + +# Build in stuff needed for usb keyboard +CONFIG_HID=y +CONFIG_HIDRAW=y +CONFIG_HID_GENERIC=y +CONFIG_HID_WIIMOTE_EXT=y +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y +# build in devtmpfs stuff to allow working without udev +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y + +# build in USB mass storage support at hifi's request. +CONFIG_USB_STORAGE=y + +# I2C stuff requested by Gilligan94 and hifi +CONFIG_REGMAP_I2C=m +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_BCM2708=m +CONFIG_I2C_BCM2708_BAUDRATE=100000 +CONFIG_I2C_SI470X=m +CONFIG_I2C_SI4713=m +CONFIG_VIDEO_IR_I2C=m +CONFIG_SND_SOC_I2C_AND_SPI=m + +#hardware RNG requested by red ink +# note: this requires rngd to be useful. +CONFIG_HW_RANDOM_BCM2708=m +CONFIG_HW_RANDOM=m + +#for people running timeservers off GPS receivers +#and using GPIO pps, requested by red ink. +CONFIG_PPS_CLIENT_GPIO=m + +#various other probablly useful stuff the rpf added to thier default config between 3.14 and 3.16 +CONFIG_EEPROM_AT24=m +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m +CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_RTC_DRV_ISL12057=m +CONFIG_RTC_DRV_PCF2127=m +CONFIG_USB_SN9C102=m + +# 1-wire serial bus support requested by Diederik +CONFIG_W1_MASTER_DS1WM=m +CONFIG_W1_MASTER_GPIO=m +CONFIG_W1_SLAVE_DS2408=m +CONFIG_W1_SLAVE_DS2408_READBACK=y +CONFIG_W1_SLAVE_DS2413=m +CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS28E04=m + +# Lirc (infra red remote) support requested by Diederik +CONFIG_STAGING_MEDIA=y +CONFIG_LIRC_STAGING=y +CONFIG_LIRC_IGORPLUGUSB=m +CONFIG_LIRC_IMON=m +CONFIG_LIRC_RPI=m +CONFIG_LIRC_SASEM=m +CONFIG_LIRC_SERIAL=m +CONFIG_LIRC_SERIAL_TRANSMITTER=y + +#I2C device drivers requested by Diederik +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_ADXL34X_I2C=m + +#SPI drivers requested by Diederik +CONFIG_REGMAP_SPI=m +CONFIG_REGMAP_MMIO=m + +#RPI camera related drivers requested by Diederik +CONFIG_VIDEO_BCM2835=y +CONFIG_VIDEO_BCM2835_MMAL=m +CONFIG_BRCM_CHAR_DRIVERS=y +CONFIG_BCM_VC_CMA=y +CONFIG_BCM_VC_SM=y + + +#I2S stuff proposed by Diederik, enabled for 3.18 kernels as we now have +#device tree which should handle any conflicts. + +CONFIG_SND_SOC=m +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +CONFIG_SND_BCM2708_SOC_I2S=m +CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m +CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m +CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m +CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m +CONFIG_SND_BCM2708_SOC_RPI_DAC=m +CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +CONFIG_SND_SOC_PCM1794A=m +CONFIG_SND_SOC_PCM5102A=m +CONFIG_SND_SOC_PCM512x=m +CONFIG_SND_SOC_TAS5713=m +CONFIG_SND_SOC_WM8804=m +CONFIG_SND_SIMPLE_CARD=m + +#stuff taken from rpf kernel 3.18 config, +#in the hope of getting a usable kernel +#(actually it made udev work but keyboard problems required further work) +CONFIG_PHYS_OFFSET=0 +CONFIG_NO_HZ=y +CONFIG_TREE_PREEMPT_RCU=y +CONFIG_PREEMPT_RCU=y +CONFIG_EMBEDDED=y +CONFIG_SLUB_DEBUG=y +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_HZ_100=y +CONFIG_HZ=100 +CONFIG_MEMORY_ISOLATION=y +CONFIG_CLEANCACHE=y +CONFIG_CMA=y +CONFIG_CMA_AREAS=7 +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_SECCOMP=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_CMA_SIZE_MBYTES=5 +CONFIG_CMA_SIZE_SEL_MBYTES=y +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CONNECTOR=m +CONFIG_HW_RANDOM=y +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +CONFIG_BCM_VC_CMA=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# more stuff taken from rpf 3.18 kernel, in the hope they would give us a usable +# kernel where my keyboard works + +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_PHYS_OFFSET=0 +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_CPUSETS is not set +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +CONFIG_HZ=100 + + +# settings unshelved in 3.18.5-1~exp1+rpi8, theese seem to be what made the keyboard work. +CONFIG_REGMAP_SPI=m +CONFIG_REGMAP_MMIO=m +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=5 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +#RTC drivers requested by diederik in https://bugs.launchpad.net/raspbian/+bug/1470679 +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8523=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m + +#Changes added during the move from 3.18 to 4.4 (bb6b4b6b331680bed807605685572d727638bb51 to af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9) +#Taken from foundation defconfig diff. +CONFIG_IKCONFIG=m +CONFIG_CPUSETS=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_I2C_MUX_PCA954x=m +CONFIG_I2C_GPIO=m +CONFIG_SPI_BCM2835AUX=m +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_HWMON=m +CONFIG_SND_SOC_WM8804_I2C=m +CONFIG_UHID=m +CONFIG_HID_BETOP_FF=m +CONFIG_MMC_BCM2835_SDHOST=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_CIFS_FSCACHE=y +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_ARM_CRYPTO=y + +#More settings from foundation config, added here during 4.4 update +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_ARCH_ORION5X is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +CONFIG_HZ=100 +CONFIG_PGTABLE_MAPPING=y +CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" +CONFIG_VFP=y +CONFIG_CAN_MCP251X=m +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_REGMAP_IRQ=y +CONFIG_SCSI_MOD=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_ISCSI_ATTRS=y +CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_NET_VENDOR_ARC=y +CONFIG_ENC28J60=m +# CONFIG_ENC28J60_WRITEVERIFY is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_MDIO_BITBANG=m +CONFIG_USB_ZD1201=m +CONFIG_BRCMFMAC_SDIO=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_KEYBOARD_GPIO=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_RPISENSE=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_EGALAX=m +CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_RPI_FT5406=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_STMPE=m +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_AD714X_SPI=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_INPUT_ADXL34X_SPI=m +CONFIG_INPUT_CMA3000=m +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_RAW=m +CONFIG_GAMEPORT=m +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m +CONFIG_CONSOLE_POLL=y +CONFIG_SPI_BCM2835=m +CONFIG_SPI_SPIDEV=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_ARIZONA=m +CONFIG_GPIO_STMPE=y +CONFIG_W1_SLAVE_DS2406=m +CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_DS2781=m +CONFIG_BATTERY_DS2760=m +CONFIG_MFD_CORE=y +CONFIG_UCB1400_CORE=m +CONFIG_MFD_STMPE=y +# +# STMicroelectronics STMPE Interface Drivers +# +CONFIG_STMPE_I2C=y +CONFIG_STMPE_SPI=y +CONFIG_MFD_WL1273_CORE=m +CONFIG_MFD_ARIZONA=y +CONFIG_MFD_ARIZONA_I2C=m +CONFIG_MFD_ARIZONA_SPI=m +CONFIG_MFD_WM5102=y +CONFIG_IR_GPIO_CIR=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m +CONFIG_RADIO_SI4713=m +CONFIG_I2C_SI4713=m +CONFIG_USB_DSBR=m +CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_SAA7706H=m +CONFIG_RADIO_TEF6862=m +CONFIG_RADIO_WL1273=m +CONFIG_RADIO_WL128X=m +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m +# +# Customise DVB Frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_L64781=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_TC90522=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_BACKLIGHT_GPIO=m +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_MPU401_UART=m +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_BCM2708_SOC_RPI_PROTO=m +CONFIG_SND_SOC_WM8731=m +CONFIG_SOUND_PRIME=m +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_EZKEY=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_USB_MON=m +CONFIG_USB_STORAGE=y +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m +CONFIG_LEDS_TRIGGER_INPUT=y +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_PRISM2_USB=m +CONFIG_R8723AU=m +CONFIG_8723AU_AP_MODE=y +CONFIG_8723AU_BT_COEXIST=y +CONFIG_VT6656=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m +CONFIG_FB_TFT=m +CONFIG_FB_TFT_AGM1264K_FL=m +CONFIG_FB_TFT_BD663474=m +CONFIG_FB_TFT_HX8340BN=m +CONFIG_FB_TFT_HX8347D=m +CONFIG_FB_TFT_HX8353D=m +CONFIG_FB_TFT_ILI9163=m +CONFIG_FB_TFT_ILI9320=m +CONFIG_FB_TFT_ILI9325=m +CONFIG_FB_TFT_ILI9340=m +CONFIG_FB_TFT_ILI9341=m +CONFIG_FB_TFT_ILI9481=m +CONFIG_FB_TFT_ILI9486=m +CONFIG_FB_TFT_PCD8544=m +CONFIG_FB_TFT_RA8875=m +CONFIG_FB_TFT_S6D02A1=m +CONFIG_FB_TFT_S6D1121=m +CONFIG_FB_TFT_SSD1289=m +CONFIG_FB_TFT_SSD1306=m +CONFIG_FB_TFT_SSD1331=m +CONFIG_FB_TFT_SSD1351=m +CONFIG_FB_TFT_ST7735R=m +CONFIG_FB_TFT_TINYLCD=m +CONFIG_FB_TFT_TLS8204=m +CONFIG_FB_TFT_UC1701=m +CONFIG_FB_TFT_UPD161704=m +CONFIG_FB_TFT_WATTEROTT=m +CONFIG_FB_FLEX=m +CONFIG_FB_TFT_FBTFT_DEVICE=m +CONFIG_EXTCON=m +# Extcon Device Drivers +CONFIG_EXTCON_ARIZONA=m +CONFIG_JFS_STATISTICS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FSCACHE=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_CACHEFILES=y +CONFIG_MSDOS_FS=y +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_UTF8=m +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_SCHEDSTATS=y +CONFIG_TRACE_IRQFLAGS=y +CONFIG_LATENCYTOP=y +CONFIG_IRQSOFF_TRACER=y +CONFIG_SCHED_TRACER=y +CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x1 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG_DEFAULT=m +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_DRBG_MENU=m +CONFIG_CRYPTO_DRBG=m +CONFIG_CRYPTO_JITTERENTROPY=m +CONFIG_CRC_ITU_T=y +CONFIG_LIBCRC32C=y + +# settings added for 4.4 kernels (probablly more than strictly needed but I +# CBA with further bisection) +CONFIG_KERNEL_GZIP=y +CONFIG_USELIB=y +CONFIG_TINY_RCU=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_OPTPROBES=y +CONFIG_MAC_PARTITION=y +CONFIG_OABI_COMPAT=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_DNS_RESOLVER=y +CONFIG_NET_MPLS_GSO=m +CONFIG_HAMRADIO=y +CONFIG_AX25=m +CONFIG_AX25_DAMA_SLAVE=y +CONFIG_NETROM=m +CONFIG_ROSE=m +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_YAM=m +CONFIG_IRDA=m +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRTTY_SIR=m +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_MCS_FIR=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_OID_REGISTRY=y + +# CONFIG_MEMORY is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_GFS2_FS_LOCKING_DLM is not set +# CONFIG_F2FS_FS_SECURITY is not set +# CONFIG_F2FS_FS_ENCRYPTION is not set +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +# CONFIG_PROC_CHILDREN is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS_MESSAGING is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +# CONFIG_JFFS2_LZO is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +# CONFIG_LOGFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NFS_V4_1 is not set +# CONFIG_NFSD_PNFS is not set +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FSCACHE is not set +# CONFIG_9P_FS_SECURITY is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_DLM_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_KPROBE_EVENT is not set +# CONFIG_UPROBE_EVENT is not set +# CONFIG_PROBE_EVENTS is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_KGDB_TESTS is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_VMAC is not set +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_CRCT10DIF is not set +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CORDIC is not set diff -Nru linux-4.9.13/debian/config/armhf/config.shelved linux-4.9-4.9.13/debian/config/armhf/config.shelved --- linux-4.9.13/debian/config/armhf/config.shelved 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/config.shelved 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,102 @@ +# CONFIG_MEMORY is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_GFS2_FS_LOCKING_DLM is not set +# CONFIG_F2FS_FS_SECURITY is not set +# CONFIG_F2FS_FS_ENCRYPTION is not set +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +# CONFIG_PROC_CHILDREN is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS_MESSAGING is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +# CONFIG_JFFS2_LZO is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +# CONFIG_LOGFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NFS_V4_1 is not set +# CONFIG_NFSD_PNFS is not set +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FSCACHE is not set +# CONFIG_9P_FS_SECURITY is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_DLM_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_KPROBE_EVENT is not set +# CONFIG_UPROBE_EVENT is not set +# CONFIG_PROBE_EVENTS is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_KGDB_TESTS is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_VMAC is not set +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_CRCT10DIF is not set +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CORDIC is not set diff -Nru linux-4.9.13/debian/config/armhf/config.test linux-4.9-4.9.13/debian/config/armhf/config.test --- linux-4.9.13/debian/config/armhf/config.test 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/config.test 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,159 @@ +CONFIG_KERNEL_GZIP=y +CONFIG_USELIB=y +CONFIG_TINY_RCU=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_OPTPROBES=y +CONFIG_MAC_PARTITION=y +CONFIG_OABI_COMPAT=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_DNS_RESOLVER=y +CONFIG_NET_MPLS_GSO=m +CONFIG_HAMRADIO=y +CONFIG_AX25=m +CONFIG_AX25_DAMA_SLAVE=y +CONFIG_NETROM=m +CONFIG_ROSE=m +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_YAM=m +CONFIG_IRDA=m +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRTTY_SIR=m +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_MCS_FIR=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_OID_REGISTRY=y + +# settings unshelved in +rpi9 +# CONFIG_MEMORY is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_GFS2_FS_LOCKING_DLM is not set +# CONFIG_F2FS_FS_SECURITY is not set +# CONFIG_F2FS_FS_ENCRYPTION is not set +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +# CONFIG_PROC_CHILDREN is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS_MESSAGING is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +# CONFIG_JFFS2_LZO is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +# CONFIG_LOGFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NFS_V4_1 is not set +# CONFIG_NFSD_PNFS is not set +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FSCACHE is not set +# CONFIG_9P_FS_SECURITY is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_DLM_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_KPROBE_EVENT is not set +# CONFIG_UPROBE_EVENT is not set +# CONFIG_PROBE_EVENTS is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_KGDB_TESTS is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_VMAC is not set +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_CRCT10DIF is not set +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CORDIC is not set diff -Nru linux-4.9.13/debian/config/armhf/defines linux-4.9-4.9.13/debian/config/armhf/defines --- linux-4.9.13/debian/config/armhf/defines 2017-02-17 17:37:13.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/armhf/defines 2017-03-12 01:46:12.000000000 +0000 @@ -1,7 +1,7 @@ [base] flavours: - armmp - armmp-lpae + rpi + rpi2 kernel-arch: arm [build] @@ -25,3 +25,28 @@ hardware-long: ARMv7 multiplatform kernel supporting LPAE. See https://wiki.debian.org/DebianKernel/ARMMP for details of supported platforms. + +[rpi_build] +image-file: arch/arm/boot/zImagerpdt + +[rpi_description] +hardware: RaspberryPI +hardware-long: Raspberry PI + +[rpi_image] +configs: + armhf/config.rpix + armhf/config.rpi + +[rpi2_image] +configs: + armhf/config.rpix + armhf/config.rpi2 + + +[rpi2_build] +image-file: arch/arm/boot/zImagerpdt + +[rpi2_description] +hardware: RaspberryPI2 +hardware-long: Raspberry PI 2 diff -Nru linux-4.9.13/debian/config/defines linux-4.9-4.9.13/debian/config/defines --- linux-4.9.13/debian/config/defines 2017-02-18 21:00:26.000000000 +0000 +++ linux-4.9-4.9.13/debian/config/defines 2017-03-12 01:46:12.000000000 +0000 @@ -50,15 +50,13 @@ sparc64 tilegx x32 -compiler: gcc-6 +compiler: gcc-4.9 featuresets: none rt [build] debug-info: true -# Enable module signing by default (implemented in the linux-signed package) -signed-modules: true [featureset-rt_base] enabled: true @@ -74,8 +72,11 @@ [relations] # compilers -gcc-6: gcc-6 , gcc-6-@gnu-type-package@:native +gcc-4.9: gcc-4.9 , gcc-6-@gnu-type-package@:native # initramfs-generators initramfs-fallback: linux-initramfs-tool initramfs-tools: initramfs-tools (>= 0.120+deb8u2) + +[packages] +libc-dev: false diff -Nru linux-4.9.13/debian/config.defines.dump linux-4.9-4.9.13/debian/config.defines.dump --- linux-4.9.13/debian/config.defines.dump 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/config.defines.dump 2017-03-12 01:46:12.000000000 +0000 @@ -70,2145 +70,2229 @@ p36 asVcompiler p37 -Vgcc-6 +Vgcc-4.9 p38 ss(Vbuild p39 tp40 (dp41 -Vsigned-modules +Vdebug-info p42 I01 -sVdebug-info -p43 -I01 ss(Vbase -p44 +p43 NVrt -p45 -tp46 -(dp47 +p44 +tp45 +(dp46 Venabled -p48 +p47 I01 ss(Vdescription -p49 -tp50 -(dp51 +p48 +tp49 +(dp50 Vpart-long-up -p52 +p51 VThis kernel is not suitable for SMP (multi-processor,\u000amulti-core or hyper-threaded) systems. -p53 +p52 sVpart-long-xen -p54 +p53 VThis kernel also runs on a Xen hypervisor.\u000aIt supports both privileged (dom0) and unprivileged (domU) operation. +p54 +ss(Vpackages p55 +tp56 +(dp57 +Vlibc-dev +p58 +I00 ss(Vrelations -p56 -tp57 -(dp58 -Vinitramfs-tools p59 -Vinitramfs-tools (>= 0.120+deb8u2) -p60 -sVgcc-6 -p61 -Vgcc-6 , gcc-6-@gnu-type-package@:native +tp60 +(dp61 +Vgcc-4.9 p62 -sVinitramfs-fallback +Vgcc-4.9 , gcc-6-@gnu-type-package@:native p63 -Vlinux-initramfs-tool +sVinitramfs-tools p64 -ss(Vimage +Vinitramfs-tools (>= 0.120+deb8u2) p65 -tp66 -(dp67 -Vinitramfs-generators +sVinitramfs-fallback +p66 +Vlinux-initramfs-tool +p67 +ss(Vimage p68 -(lp69 +tp69 +(dp70 +Vinitramfs-generators +p71 +(lp72 Vinitramfs-tools -p70 +p73 aVinitramfs-fallback -p71 +p74 ass(Vabi -p72 -tp73 -(dp74 -Vabiname p75 +tp76 +(dp77 +Vabiname +p78 V2 -p76 +p79 sVignore-changes -p77 -(lp78 +p80 +(lp81 V__cpuhp_* -p79 +p82 aVmodule:drivers/iio/common/st_sensors/** -p80 +p83 aVmodule:drivers/net/wireless/** -p81 +p84 aVmodule:drivers/power/supply/bq27xxx_battery -p82 +p85 aVmodule:drivers/usb/host/** -p83 +p86 aVmodule:drivers/usb/musb/** -p84 +p87 aVmodule:net/ceph/libceph -p85 +p88 aVbtree_* -p86 +p89 aVvisitor* -p87 +p90 aVcan_rx_register -p88 +p91 aVip6_xmit -p89 +p92 ass(Vbase -p90 +p93 Valpha -p91 -tp92 -(dp93 -Vfeaturesets p94 -(lp95 +tp95 +(dp96 +Vfeaturesets +p97 +(lp98 Vnone -p96 +p99 asVkernel-arch -p97 +p100 Valpha -p98 +p101 ss(Vdescription -p99 -g91 +p102 +g94 NValpha-smp -p100 -tp101 -(dp102 -Vhardware p103 +tp104 +(dp105 +Vhardware +p106 VAlpha SMP -p104 +p107 sVhardware-long -p105 +p108 VDEC Alpha SMP systems with extended kernel start address (Wildfire, Titan, Marvel) -p106 +p109 ss(Vbuild -p107 -g91 -tp108 -(dp109 -Vsigned-modules p110 +g94 +tp111 +(dp112 +Vsigned-modules +p113 I00 sVimage-file -p111 +p114 Varch/alpha/boot/vmlinux.gz -p112 +p115 ss(Vdescription -p113 -g91 +p116 +g94 NValpha-generic -p114 -tp115 -(dp116 -Vhardware p117 +tp118 +(dp119 +Vhardware +p120 VAlpha -p118 +p121 sVhardware-long -p119 +p122 VDEC Alpha systems with extended kernel start address (Wildfire, Titan, Marvel) -p120 +p123 ss(Vimage -p121 -g91 -tp122 -(dp123 -Vsuggests p124 +g94 +tp125 +(dp126 +Vsuggests +p127 Vaboot, fdutils -p125 +p128 sVinstall-stem -p126 +p129 Vvmlinuz -p127 +p130 ss(Vbase -p128 -g91 -g96 -tp129 -(dp130 -Vflavours p131 -(lp132 +g94 +g99 +tp132 +(dp133 +Vflavours +p134 +(lp135 Valpha-generic -p133 +p136 aValpha-smp -p134 +p137 asVimplicit-flavour -p135 +p138 I01 ss(Vbase -p136 +p139 Vamd64 -p137 -tp138 -(dp139 -Vfeaturesets p140 -(lp141 +tp141 +(dp142 +Vfeaturesets +p143 +(lp144 Vnone -p142 +p145 aVrt -p143 +p146 asVkernel-arch -p144 +p147 Vx86 -p145 +p148 ss(Vdescription -p146 -g137 +p149 +g140 NVamd64 -p147 -tp148 -(dp149 -Vhardware p150 +tp151 +(dp152 +Vhardware +p153 V64-bit PCs -p151 +p154 sVhardware-long -p152 +p155 VPCs with AMD64, Intel 64 or VIA Nano processors -p153 +p156 ss(Vbuild -p154 -g137 -tp155 -(dp156 -Vvdso p157 +g140 +tp158 +(dp159 +Vvdso +p160 I01 sVimage-file -p158 +p161 Varch/x86/boot/bzImage -p159 +p162 sVdebug-info -p160 +p163 I01 ss(Vrelations -p161 -g137 -tp162 -(dp163 -Vheaders%gcc-6 p164 +g140 +tp165 +(dp166 +Vheaders%gcc-6 +p167 Vlinux-compiler-gcc-6-x86 -p165 +p168 ss(Vimage -p166 -g137 -tp167 -(dp168 -Vbreaks p169 +g140 +tp170 +(dp171 +Vbreaks +p172 Vxserver-xorg-input-vmmouse (<< 1:13.0.99) -p170 +p173 sVinstall-stem -p171 +p174 Vvmlinuz -p172 +p175 sVbootloaders -p173 -(lp174 +p176 +(lp177 Vgrub-pc -p175 +p178 aVgrub-efi-amd64 -p176 +p179 aVextlinux -p177 +p180 ass(Vbase -p178 -g137 +p181 +g140 Vnone -p179 -tp180 -(dp181 -Vflavours p182 -(lp183 +tp183 +(dp184 +Vflavours +p185 +(lp186 Vamd64 -p184 +p187 ass(Vdescription -p185 -g137 -g179 +p188 +g140 +g182 Vamd64 -p186 -tp187 -(dp188 -Vparts p189 -(lp190 +tp190 +(dp191 +Vparts +p192 +(lp193 Vxen -p191 +p194 ass(Vbase -p192 -g137 +p195 +g140 Vrt -p193 -tp194 -(dp195 -Vflavours p196 -(lp197 +tp197 +(dp198 +Vflavours +p199 +(lp200 Vamd64 -p198 +p201 ass(Vbase -p199 +p202 Varm64 -p200 -tp201 -(dp202 -Vfeaturesets p203 -(lp204 +tp204 +(dp205 +Vfeaturesets +p206 +(lp207 Vnone -p205 +p208 asVkernel-arch -p206 +p209 Varm64 -p207 +p210 ss(Vdescription -p208 -g200 +p211 +g203 NVarm64 -p209 -tp210 -(dp211 -Vhardware p212 +tp213 +(dp214 +Vhardware +p215 V64-bit ARMv8 machines -p213 +p216 ss(Vbuild -p214 -g200 -tp215 -(dp216 -Vvdso p217 +g203 +tp218 +(dp219 +Vvdso +p220 I01 sVimage-file -p218 +p221 Varch/arm64/boot/Image -p219 +p222 sVdebug-info -p220 +p223 I01 ss(Vimage -p221 -g200 +p224 +g203 NVarm64 -p222 -tp223 -(dp224 -s(Vimage p225 -g200 tp226 (dp227 -Vbreaks +s(Vimage p228 +g203 +tp229 +(dp230 +Vbreaks +p231 Vlibmozjs185-1.0, libmozjs-24-0 (<< 24.2.0-5.1~) -p229 +p232 sVinstall-stem -p230 +p233 Vvmlinuz -p231 +p234 ss(Vbase -p232 -g200 +p235 +g203 Vnone -p233 -tp234 -(dp235 -Vflavours p236 -(lp237 +tp237 +(dp238 +Vflavours +p239 +(lp240 Varm64 -p238 +p241 ass(Vbase -p239 +p242 Varmel -p240 -tp241 -(dp242 -g94 -(lp243 -g96 +p243 +tp244 +(dp245 +g97 +(lp246 +g99 asVkernel-arch -p244 +p247 Varm -p245 +p248 ss(Vbuild -p246 -g240 -tp247 -(dp248 -Vsigned-modules p249 +g243 +tp250 +(dp251 +Vsigned-modules +p252 I00 sVimage-file -p250 +p253 Varch/arm/boot/zImage -p251 +p254 ss(Vimage -p252 -g240 +p255 +g243 NVmarvell -p253 -tp254 -(dp255 -Vrecommends p256 +tp257 +(dp258 +Vrecommends +p259 Vu-boot-tools -p257 +p260 sVbreaks -p258 +p261 Vflash-kernel (<< 3.57~) -p259 +p262 sVcheck-size-with-dtb -p260 +p263 I01 sVcheck-size -p261 +p264 L2097080L ss(Vdescription -p262 -g240 +p265 +g243 NVmarvell -p263 -tp264 -(dp265 -Vhardware p266 +tp267 +(dp268 +Vhardware +p269 VMarvell Kirkwood/Orion -p267 +p270 sVhardware-long -p268 +p271 VMarvell Kirkwood based systems (SheevaPlug, QNAP TS-119/TS-219, etc)\u000aand Orion 5181, 5182 and 5281 based systems (QNAP TS-109/TS-209, etc) -p269 +p272 ss(Vrelations -p270 -g240 -tp271 -(dp272 -Vheaders%gcc-6 p273 +g243 +tp274 +(dp275 +Vheaders%gcc-6 +p276 Vlinux-compiler-gcc-6-arm -p274 +p277 ss(Vimage -p275 -g240 -tp276 -(dp277 -Vinstall-stem p278 +g243 +tp279 +(dp280 +Vinstall-stem +p281 Vvmlinuz -p279 -ss(g128 -g240 -g96 -tp280 -(dp281 -g131 -(lp282 +p282 +ss(g131 +g243 +g99 +tp283 +(dp284 +g134 +(lp285 Vmarvell -p283 -asg135 +p286 +asg138 I01 -ss(Vbase -p284 -Varmhf -p285 -tp286 -(dp287 -g94 -(lp288 -g96 -asVkernel-arch -p289 -Varm -p290 ss(Vdescription -p291 -g285 +p287 +Varmhf +p288 NVarmmp -p292 -tp293 -(dp294 +p289 +tp290 +(dp291 Vhardware -p295 +p292 VARMv7 multiplatform compatible SoCs -p296 +p293 sVhardware-long -p297 +p294 VARMv7 multiplatform kernel. See\u000ahttps://wiki.debian.org/DebianKernel/ARMMP for details of supported\u000aplatforms -p298 -ss(Vbuild -p299 -g285 -tp300 -(dp301 -Vvdso +p295 +ss(Vdescription +p296 +g288 +NVrpi +p297 +tp298 +(dp299 +Vhardware +p300 +VRaspberryPI +p301 +sVhardware-long p302 -I01 -sVimage-file +VRaspberry PI p303 -Varch/arm/boot/zImage -p304 ss(Vdescription -p305 -g285 +p304 +g288 NVarmmp-lpae -p306 -tp307 -(dp308 +p305 +tp306 +(dp307 Vhardware -p309 +p308 VARMv7 multiplatform compatible SoCs supporting LPAE -p310 +p309 sVhardware-long -p311 +p310 VARMv7 multiplatform kernel supporting LPAE. See\u000ahttps://wiki.debian.org/DebianKernel/ARMMP for details of supported\u000aplatforms. +p311 +ss(Vbuild p312 -ss(Vrelations +g288 +NVrpi p313 -g285 tp314 (dp315 -Vheaders%gcc-6 +Vimage-file p316 -Vlinux-compiler-gcc-6-arm +Varch/arm/boot/zImagerpdt p317 -ss(Vimage +ss(Vrelations p318 -g285 +g288 tp319 (dp320 -Vinstall-stem +Vheaders%gcc-6 p321 -Vvmlinuz +Vlinux-compiler-gcc-6-arm p322 -ss(g128 -g285 -g96 -tp323 -(dp324 -g131 -(lp325 -Varmmp +ss(Vimage +p323 +g288 +tp324 +(dp325 +Vinstall-stem p326 -aVarmmp-lpae +Vvmlinuz p327 -asg135 -I01 ss(Vbase p328 -Vhppa -p329 -tp330 -(dp331 -g94 -(lp332 -g96 +g288 +tp329 +(dp330 +g97 +(lp331 +g99 asVkernel-arch +p332 +Varm p333 -Vparisc +ss(Vbuild p334 +g288 +tp335 +(dp336 +Vvdso +p337 +I01 +sVimage-file +p338 +Varch/arm/boot/zImage +p339 ss(Vbuild -p335 -g329 -tp336 -(dp337 +p340 +g288 +NVrpi2 +p341 +tp342 +(dp343 +Vimage-file +p344 +Varch/arm/boot/zImagerpdt +p345 +ss(Vimage +p346 +g288 +NVrpi2 +p347 +tp348 +(dp349 +Vconfigs +p350 +(lp351 +Varmhf/config.rpix +p352 +aVarmhf/config.rpi2 +p353 +ass(Vimage +p354 +g288 +NVrpi +p355 +tp356 +(dp357 +Vconfigs +p358 +(lp359 +Varmhf/config.rpix +p360 +aVarmhf/config.rpi +p361 +ass(Vdescription +p362 +g288 +NVrpi2 +p363 +tp364 +(dp365 +Vhardware +p366 +VRaspberryPI2 +p367 +sVhardware-long +p368 +VRaspberry PI 2 +p369 +ss(g131 +g288 +g99 +tp370 +(dp371 +g134 +(lp372 +Vrpi +p373 +aVrpi2 +p374 +asg138 +I01 +ss(Vbase +p375 +Vhppa +p376 +tp377 +(dp378 +g97 +(lp379 +g99 +asVkernel-arch +p380 +Vparisc +p381 +ss(Vbuild +p382 +g376 +tp383 +(dp384 Vsigned-modules -p338 +p385 I00 sVimage-file -p339 +p386 Vvmlinux -p340 +p387 ss(Vdescription -p341 -g329 +p388 +g376 NVparisc64-smp -p342 -tp343 -(dp344 +p389 +tp390 +(dp391 Vhardware -p345 +p392 Vmultiprocessor 64-bit PA-RISC -p346 +p393 sVhardware-long -p347 +p394 VHP PA-RISC 64-bit SMP systems with support for more than 4 GB RAM -p348 +p395 ss(Vbase -p349 -g329 +p396 +g376 NVparisc64-smp -p350 -tp351 -(dp352 +p397 +tp398 +(dp399 Vcflags -p353 +p400 V-fno-cse-follow-jumps -p354 +p401 sVoverride-host-type -p355 +p402 Vhppa64-linux-gnu -p356 +p403 ss(Vrelations -p357 -g329 -tp358 -(dp359 +p404 +g376 +tp405 +(dp406 Vgcc-6 -p360 +p407 Vgcc-6 , binutils-hppa64-linux-gnu , gcc-6-hppa64-linux-gnu , gcc-6-hppa-linux-gnu:native , binutils-hppa64-linux-gnu:native , gcc-6-hppa64-linux-gnu:native -p361 +p408 ss(Vdescription -p362 -g329 +p409 +g376 NVparisc -p363 -tp364 -(dp365 +p410 +tp411 +(dp412 Vhardware -p366 +p413 V32-bit PA-RISC -p367 +p414 sVhardware-long -p368 +p415 VHP PA-RISC 32-bit systems with max 4 GB RAM -p369 +p416 ss(Vimage -p370 -g329 -tp371 -(dp372 +p417 +g376 +tp418 +(dp419 Vsuggests -p373 +p420 Vpalo -p374 +p421 sVinstall-stem -p375 +p422 Vvmlinux -p376 -ss(g128 -g329 -g96 -tp377 -(dp378 -g131 -(lp379 +p423 +ss(g131 +g376 +g99 +tp424 +(dp425 +g134 +(lp426 Vparisc -p380 +p427 aVparisc64-smp -p381 -asg135 +p428 +asg138 I01 ss(Vbase -p382 +p429 Vi386 -p383 -tp384 -(dp385 +p430 +tp431 +(dp432 Vfeaturesets -p386 -(lp387 +p433 +(lp434 Vnone -p388 +p435 aVrt -p389 +p436 asVkernel-arch -p390 +p437 Vx86 -p391 +p438 ss(Vbuild -p392 -g383 -tp393 -(dp394 +p439 +g430 +tp440 +(dp441 Vvdso -p395 +p442 I01 sVimage-file -p396 +p443 Varch/x86/boot/bzImage -p397 +p444 ss(Vdescription -p398 -g383 +p445 +g430 NV686-pae -p399 -tp400 -(dp401 +p446 +tp447 +(dp448 Vhardware -p402 +p449 Vmodern PCs -p403 +p450 sVhardware-long -p404 +p451 VPCs with one or more processors supporting PAE -p405 +p452 sVparts -p406 -(lp407 +p453 +(lp454 Vpae -p408 +p455 ass(Vdescription -p409 -g383 -tp410 -(dp411 +p456 +g430 +tp457 +(dp458 Vpart-long-pae -p412 +p459 VThis kernel requires PAE (Physical Address Extension).\u000aThis feature is supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon,\u000aCore and Atom; AMD Geode NX, Athlon (K7), Duron, Opteron, Sempron,\u000aTurion or Phenom; Transmeta Efficeon; VIA C7; and some other processors. -p413 +p460 ss(Vbuild -p414 -g383 +p461 +g430 NV686-pae -p415 -tp416 -(dp417 +p462 +tp463 +(dp464 Vdebug-info -p418 +p465 I01 ss(Vdescription -p419 -g383 +p466 +g430 NV686 -p420 -tp421 -(dp422 +p467 +tp468 +(dp469 Vhardware -p423 +p470 Volder PCs -p424 +p471 sVhardware-long -p425 +p472 VPCs with one or more processors not supporting PAE -p426 +p473 ss(Vrelations -p427 -g383 -tp428 -(dp429 +p474 +g430 +tp475 +(dp476 Vheaders%gcc-6 -p430 +p477 Vlinux-compiler-gcc-6-x86 -p431 +p478 ss(Vimage -p432 -g383 -tp433 -(dp434 +p479 +g430 +tp480 +(dp481 Vbreaks -p435 +p482 Vxserver-xorg-input-vmmouse (<< 1:13.0.99) -p436 +p483 sVinstall-stem -p437 +p484 Vvmlinuz -p438 +p485 sVbootloaders -p439 -(lp440 +p486 +(lp487 Vgrub-pc -p441 +p488 aVextlinux -p442 +p489 ass(Vbase -p443 -g383 +p490 +g430 Vnone -p444 -tp445 -(dp446 +p491 +tp492 +(dp493 Vflavours -p447 -(lp448 +p494 +(lp495 V686 -p449 +p496 aV686-pae -p450 +p497 ass(Vdescription -p451 -g383 -g444 +p498 +g430 +g491 V686-pae -p452 -tp453 -(dp454 +p499 +tp500 +(dp501 Vparts -p455 -(lp456 +p502 +(lp503 Vxen -p457 +p504 ass(Vbase -p458 -g383 +p505 +g430 Vrt -p459 -tp460 -(dp461 +p506 +tp507 +(dp508 Vflavours -p462 -(lp463 +p509 +(lp510 V686-pae -p464 +p511 ass(Vbase -p465 +p512 Vm68k -p466 -tp467 -(dp468 +p513 +tp514 +(dp515 Vcflags -p469 +p516 V-ffreestanding -p470 -sg94 -(lp471 -g96 +p517 +sg97 +(lp518 +g99 asVkernel-arch -p472 +p519 Vm68k -p473 +p520 ss(Vbuild -p474 -g466 -tp475 -(dp476 +p521 +g513 +tp522 +(dp523 Vsigned-modules -p477 +p524 I00 sVimage-file -p478 +p525 Vvmlinux.gz -p479 +p526 ss(Vdescription -p480 -g466 +p527 +g513 NVm68k -p481 -tp482 -(dp483 +p528 +tp529 +(dp530 Vhardware -p484 +p531 VMotorola MC68020+ family -p485 +p532 ss(Vimage -p486 -g466 -tp487 -(dp488 +p533 +g513 +tp534 +(dp535 Vsuggests -p489 +p536 Vvmelilo, fdutils -p490 +p537 sVinstall-stem -p491 +p538 Vvmlinuz -p492 -ss(g128 -g466 -g96 -tp493 -(dp494 -g131 -(lp495 +p539 +ss(g131 +g513 +g99 +tp540 +(dp541 +g134 +(lp542 Vm68k -p496 -asg135 +p543 +asg138 I01 ss(Vbase -p497 +p544 Vmips -p498 -tp499 -(dp500 -g94 -(lp501 -g96 +p545 +tp546 +(dp547 +g97 +(lp548 +g99 asVkernel-arch -p502 +p549 Vmips -p503 +p550 ss(Vbuild -p504 -g498 -tp505 -(dp506 +p551 +g545 +tp552 +(dp553 Vsigned-modules -p507 +p554 I00 sVimage-file -p508 +p555 Vvmlinux -p509 +p556 ss(Vimage -p510 -g498 +p557 +g545 NV4kc-malta -p511 -tp512 -(dp513 +p558 +tp559 +(dp560 Vconfigs -p514 -(lp515 +p561 +(lp562 Vkernelarch-mips/config.malta -p516 +p563 aVkernelarch-mips/config.mips32r2 -p517 +p564 ass(Vimage -p518 -g498 +p565 +g545 NV5kc-malta -p519 -tp520 -(dp521 +p566 +tp567 +(dp568 Vconfigs -p522 -(lp523 +p569 +(lp570 Vkernelarch-mips/config.malta -p524 +p571 aVkernelarch-mips/config.mips64r2 -p525 +p572 ass(Vdescription -p526 -g498 +p573 +g545 NVocteon -p527 -tp528 -(dp529 +p574 +tp575 +(dp576 Vhardware -p530 +p577 VOcteon -p531 +p578 sVhardware-long -p532 +p579 VCavium Networks Octeon -p533 +p580 ss(Vimage -p534 -g498 +p581 +g545 NVocteon -p535 -tp536 -(dp537 +p582 +tp583 +(dp584 Vconfigs -p538 -(lp539 +p585 +(lp586 Vkernelarch-mips/config.octeon -p540 +p587 ass(Vimage -p541 -g498 -tp542 -(dp543 +p588 +g545 +tp589 +(dp590 Vinstall-stem -p544 +p591 Vvmlinux -p545 +p592 ss(Vdescription -p546 -g498 +p593 +g545 NV5kc-malta -p547 -tp548 -(dp549 +p594 +tp595 +(dp596 Vhardware -p550 +p597 VMIPS Malta (64-bit) -p551 +p598 sVhardware-long -p552 +p599 VMIPS Malta boards (64-bit) -p553 +p600 ss(Vdescription -p554 -g498 +p601 +g545 NV4kc-malta -p555 -tp556 -(dp557 +p602 +tp603 +(dp604 Vhardware -p558 +p605 VMIPS Malta -p559 +p606 sVhardware-long -p560 +p607 VMIPS Malta boards -p561 -ss(g128 -g498 -g96 -tp562 -(dp563 -g131 -(lp564 +p608 +ss(g131 +g545 +g99 +tp609 +(dp610 +g134 +(lp611 V4kc-malta -p565 +p612 aV5kc-malta -p566 +p613 aVocteon -p567 -asg135 +p614 +asg138 I01 ss(Vbase -p568 +p615 Vmipsel -p569 -tp570 -(dp571 -g94 -(lp572 -g96 +p616 +tp617 +(dp618 +g97 +(lp619 +g99 asVkernel-arch -p573 +p620 Vmips -p574 +p621 ss(Vimage -p575 -g569 +p622 +g616 NVloongson-3 -p576 -tp577 -(dp578 +p623 +tp624 +(dp625 Vconfigs -p579 -(lp580 +p626 +(lp627 Vkernelarch-mips/config.loongson-3 -p581 -ass(Vbuild -p582 -g569 -tp583 -(dp584 +p628 +ass(Vbuild +p629 +g616 +tp630 +(dp631 Vsigned-modules -p585 +p632 I00 sVimage-file -p586 +p633 Vvmlinux -p587 +p634 ss(Vimage -p588 -g569 +p635 +g616 NV4kc-malta -p589 -tp590 -(dp591 +p636 +tp637 +(dp638 Vconfigs -p592 -(lp593 +p639 +(lp640 Vkernelarch-mips/config.malta -p594 +p641 aVkernelarch-mips/config.mips32r2 -p595 +p642 ass(Vimage -p596 -g569 +p643 +g616 NV5kc-malta -p597 -tp598 -(dp599 +p644 +tp645 +(dp646 Vconfigs -p600 -(lp601 +p647 +(lp648 Vkernelarch-mips/config.malta -p602 +p649 aVkernelarch-mips/config.mips64r2 -p603 +p650 ass(Vdescription -p604 -g569 +p651 +g616 NVocteon -p605 -tp606 -(dp607 +p652 +tp653 +(dp654 Vhardware -p608 +p655 VOcteon -p609 +p656 sVhardware-long -p610 +p657 VCavium Networks Octeon -p611 +p658 ss(Vdescription -p612 -g569 +p659 +g616 NVloongson-3 -p613 -tp614 -(dp615 +p660 +tp661 +(dp662 Vhardware -p616 +p663 VLoongson 3A/3B -p617 +p664 sVhardware-long -p618 +p665 VLoongson 3A or 3B based systems (e.g. from Loongson or Lemote) -p619 +p666 ss(Vimage -p620 -g569 +p667 +g616 NVocteon -p621 -tp622 -(dp623 +p668 +tp669 +(dp670 Vconfigs -p624 -(lp625 +p671 +(lp672 Vkernelarch-mips/config.octeon -p626 +p673 ass(Vimage -p627 -g569 -tp628 -(dp629 +p674 +g616 +tp675 +(dp676 Vinstall-stem -p630 +p677 Vvmlinux -p631 +p678 ss(Vdescription -p632 -g569 +p679 +g616 NV5kc-malta -p633 -tp634 -(dp635 +p680 +tp681 +(dp682 Vhardware -p636 +p683 VMIPS Malta (64-bit) -p637 +p684 sVhardware-long -p638 +p685 VMIPS Malta boards (64-bit) -p639 +p686 ss(Vdescription -p640 -g569 +p687 +g616 NV4kc-malta -p641 -tp642 -(dp643 +p688 +tp689 +(dp690 Vhardware -p644 +p691 VMIPS Malta -p645 +p692 sVhardware-long -p646 +p693 VMIPS Malta boards -p647 -ss(g128 -g569 -g96 -tp648 -(dp649 -g131 -(lp650 +p694 +ss(g131 +g616 +g99 +tp695 +(dp696 +g134 +(lp697 V4kc-malta -p651 +p698 aV5kc-malta -p652 +p699 aVloongson-3 -p653 +p700 aVocteon -p654 -asg135 +p701 +asg138 I01 ss(Vbase -p655 +p702 Vmipsn32 -p656 -tp657 -(dp658 +p703 +tp704 +(dp705 Vfeaturesets -p659 -(lp660 +p706 +(lp707 sVkernel-arch -p661 +p708 Vmips -p662 +p709 ss(Vbase -p663 +p710 Vmipsn32el -p664 -tp665 -(dp666 +p711 +tp712 +(dp713 Vfeaturesets -p667 -(lp668 +p714 +(lp715 sVkernel-arch -p669 +p716 Vmips -p670 +p717 ss(Vbase -p671 +p718 Vmips64 -p672 -tp673 -(dp674 -g94 -(lp675 -g96 +p719 +tp720 +(dp721 +g97 +(lp722 +g99 asVkernel-arch -p676 +p723 Vmips -p677 +p724 ss(Vbuild -p678 -g672 -tp679 -(dp680 +p725 +g719 +tp726 +(dp727 Vsigned-modules -p681 +p728 I00 sVimage-file -p682 +p729 Vvmlinux -p683 +p730 ss(Vimage -p684 -g672 +p731 +g719 NV5kc-malta -p685 -tp686 -(dp687 +p732 +tp733 +(dp734 Vconfigs -p688 -(lp689 +p735 +(lp736 Vkernelarch-mips/config.malta -p690 +p737 aVkernelarch-mips/config.mips64r2 -p691 +p738 ass(Vdescription -p692 -g672 +p739 +g719 NVocteon -p693 -tp694 -(dp695 +p740 +tp741 +(dp742 Vhardware -p696 +p743 VOcteon -p697 +p744 sVhardware-long -p698 +p745 VCavium Networks Octeon -p699 +p746 ss(Vimage -p700 -g672 -tp701 -(dp702 +p747 +g719 +tp748 +(dp749 Vinstall-stem -p703 +p750 Vvmlinux -p704 +p751 ss(Vdescription -p705 -g672 +p752 +g719 NV5kc-malta -p706 -tp707 -(dp708 +p753 +tp754 +(dp755 Vhardware -p709 +p756 VMIPS Malta -p710 +p757 sVhardware-long -p711 +p758 VMIPS Malta boards -p712 +p759 ss(Vimage -p713 -g672 +p760 +g719 NVocteon -p714 -tp715 -(dp716 +p761 +tp762 +(dp763 Vconfigs -p717 -(lp718 +p764 +(lp765 Vkernelarch-mips/config.octeon -p719 -ass(g128 -g672 -g96 -tp720 -(dp721 -g131 -(lp722 +p766 +ass(g131 +g719 +g99 +tp767 +(dp768 +g134 +(lp769 V5kc-malta -p723 +p770 aVocteon -p724 -asg135 +p771 +asg138 I01 ss(Vbase -p725 +p772 Vmips64el -p726 -tp727 -(dp728 -g94 -(lp729 -g96 +p773 +tp774 +(dp775 +g97 +(lp776 +g99 asVkernel-arch -p730 +p777 Vmips -p731 +p778 ss(Vimage -p732 -g726 +p779 +g773 NVloongson-3 -p733 -tp734 -(dp735 +p780 +tp781 +(dp782 Vconfigs -p736 -(lp737 +p783 +(lp784 Vkernelarch-mips/config.loongson-3 -p738 +p785 ass(Vbuild -p739 -g726 -tp740 -(dp741 +p786 +g773 +tp787 +(dp788 Vsigned-modules -p742 +p789 I00 sVimage-file -p743 +p790 Vvmlinux -p744 +p791 ss(Vimage -p745 -g726 +p792 +g773 NV5kc-malta -p746 -tp747 -(dp748 +p793 +tp794 +(dp795 Vconfigs -p749 -(lp750 +p796 +(lp797 Vkernelarch-mips/config.malta -p751 +p798 aVkernelarch-mips/config.mips64r2 -p752 +p799 ass(Vdescription -p753 -g726 +p800 +g773 NVocteon -p754 -tp755 -(dp756 +p801 +tp802 +(dp803 Vhardware -p757 +p804 VOcteon -p758 +p805 sVhardware-long -p759 +p806 VCavium Networks Octeon -p760 +p807 ss(Vdescription -p761 -g726 +p808 +g773 NVloongson-3 -p762 -tp763 -(dp764 +p809 +tp810 +(dp811 Vhardware -p765 +p812 VLoongson 3A/3B -p766 +p813 sVhardware-long -p767 +p814 VLoongson 3A or 3B based systems (e.g. from Loongson or Lemote) -p768 +p815 ss(Vimage -p769 -g726 -tp770 -(dp771 +p816 +g773 +tp817 +(dp818 Vinstall-stem -p772 +p819 Vvmlinux -p773 +p820 ss(Vdescription -p774 -g726 +p821 +g773 NV5kc-malta -p775 -tp776 -(dp777 +p822 +tp823 +(dp824 Vhardware -p778 +p825 VMIPS Malta -p779 +p826 sVhardware-long -p780 +p827 VMIPS Malta boards -p781 +p828 ss(Vimage -p782 -g726 +p829 +g773 NVocteon -p783 -tp784 -(dp785 +p830 +tp831 +(dp832 Vconfigs -p786 -(lp787 +p833 +(lp834 Vkernelarch-mips/config.octeon -p788 -ass(g128 -g726 -g96 -tp789 -(dp790 -g131 -(lp791 +p835 +ass(g131 +g773 +g99 +tp836 +(dp837 +g134 +(lp838 V5kc-malta -p792 +p839 aVloongson-3 -p793 +p840 aVocteon -p794 -asg135 +p841 +asg138 I01 ss(Vbase -p795 +p842 Vpowerpc -p796 -tp797 -(dp798 -g94 -(lp799 -g96 +p843 +tp844 +(dp845 +g97 +(lp846 +g99 asVkernel-arch -p800 +p847 Vpowerpc -p801 +p848 ss(Vdescription -p802 -g796 +p849 +g843 NVpowerpc64 -p803 -tp804 -(dp805 +p850 +tp851 +(dp852 Vhardware -p806 +p853 V64-bit PowerPC -p807 +p854 ss(Vbuild -p808 -g796 -tp809 -(dp810 +p855 +g843 +tp856 +(dp857 Vvdso -p811 +p858 I01 sVimage-file -p812 +p859 Vvmlinux -p813 +p860 ss(Vimage -p814 -g796 +p861 +g843 NVpowerpc-smp -p815 -tp816 -(dp817 +p862 +tp863 +(dp864 Vconfigs -p818 -(lp819 +p865 +(lp866 Vpowerpc/config.powerpc -p820 +p867 aVpowerpc/config.powerpc-smp -p821 +p868 ass(Vdescription -p822 -g796 +p869 +g843 NVpowerpc -p823 -tp824 -(dp825 +p870 +tp871 +(dp872 Vhardware -p826 +p873 Vuniprocessor 32-bit PowerPC -p827 +p874 ss(Vimage -p828 -g796 +p875 +g843 NVpowerpc64 -p829 -tp830 -(dp831 +p876 +tp877 +(dp878 Vconfigs -p832 -(lp833 +p879 +(lp880 Vkernelarch-powerpc/config-arch-64 -p834 +p881 aVkernelarch-powerpc/config-arch-64-be -p835 +p882 ass(Vdescription -p836 -g796 +p883 +g843 NVpowerpc-smp -p837 -tp838 -(dp839 +p884 +tp885 +(dp886 Vhardware -p840 +p887 Vmultiprocessor 32-bit PowerPC -p841 +p888 ss(Vimage -p842 -g796 -tp843 -(dp844 +p889 +g843 +tp890 +(dp891 Vsuggests -p845 +p892 Vmkvmlinuz -p846 +p893 sVinstall-stem -p847 +p894 Vvmlinux -p848 +p895 sVconfigs -p849 -(lp850 -ss(g128 -g796 -g96 -tp851 -(dp852 -g131 -(lp853 +p896 +(lp897 +ss(g131 +g843 +g99 +tp898 +(dp899 +g134 +(lp900 Vpowerpc -p854 +p901 aVpowerpc-smp -p855 +p902 aVpowerpc64 -p856 -asg135 +p903 +asg138 I01 ss(Vbase -p857 +p904 Vpowerpcspe -p858 -tp859 -(dp860 -g94 -(lp861 -g96 +p905 +tp906 +(dp907 +g97 +(lp908 +g99 asVkernel-arch -p862 +p909 Vpowerpc -p863 +p910 ss(Vbuild -p864 -g858 -tp865 -(dp866 +p911 +g905 +tp912 +(dp913 Vsigned-modules -p867 +p914 I00 sVimage-file -p868 +p915 Vvmlinux -p869 +p916 sVvdso -p870 +p917 I01 ss(Vimage -p871 -g858 -tp872 -(dp873 +p918 +g905 +tp919 +(dp920 Vsuggests -p874 +p921 Vmkvmlinuz -p875 +p922 sVinstall-stem -p876 +p923 Vvmlinux -p877 +p924 ss(Vdescription -p878 -g858 -tp879 -(dp880 +p925 +g905 +tp926 +(dp927 Vhardware -p881 +p928 V32-bit PowerPC with SPE (instead of AltiVec) with SMP support -p882 -ss(g128 -g858 -g96 -tp883 -(dp884 -g131 -(lp885 +p929 +ss(g131 +g905 +g99 +tp930 +(dp931 +g134 +(lp932 Vpowerpcspe -p886 -asg135 +p933 +asg138 I01 ss(Vbase -p887 +p934 Vppc64 -p888 -tp889 -(dp890 -g94 -(lp891 -g96 +p935 +tp936 +(dp937 +g97 +(lp938 +g99 asVkernel-arch -p892 +p939 Vpowerpc -p893 +p940 ss(Vdescription -p894 -g888 +p941 +g935 NVpowerpc64 -p895 -tp896 -(dp897 +p942 +tp943 +(dp944 Vhardware -p898 +p945 V64-bit PowerPC -p899 +p946 ss(Vbuild -p900 -g888 -tp901 -(dp902 +p947 +g935 +tp948 +(dp949 Vsigned-modules -p903 +p950 I00 sVimage-file -p904 +p951 Vvmlinux -p905 +p952 sVvdso -p906 +p953 I01 ss(Vimage -p907 -g888 +p954 +g935 NVpowerpc64 -p908 -tp909 -(dp910 +p955 +tp956 +(dp957 Vconfigs -p911 -(lp912 +p958 +(lp959 Vkernelarch-powerpc/config-arch-64 -p913 +p960 aVkernelarch-powerpc/config-arch-64-be -p914 +p961 ass(Vimage -p915 -g888 -tp916 -(dp917 +p962 +g935 +tp963 +(dp964 Vsuggests -p918 +p965 Vmkvmlinuz -p919 +p966 sVinstall-stem -p920 +p967 Vvmlinux -p921 +p968 sVconfigs -p922 -(lp923 -ss(g128 -g888 -g96 -tp924 -(dp925 -g131 -(lp926 +p969 +(lp970 +ss(g131 +g935 +g99 +tp971 +(dp972 +g134 +(lp973 Vpowerpc64 -p927 -asg135 +p974 +asg138 I01 ss(Vbase -p928 +p975 Vppc64el -p929 -tp930 -(dp931 -g94 -(lp932 -g96 +p976 +tp977 +(dp978 +g97 +(lp979 +g99 asVkernel-arch -p933 +p980 Vpowerpc -p934 +p981 ss(Vdescription -p935 -g929 +p982 +g976 NVpowerpc64le -p936 -tp937 -(dp938 +p983 +tp984 +(dp985 Vhardware -p939 +p986 VLittle-endian 64-bit PowerPC -p940 +p987 ss(Vbuild -p941 -g929 -tp942 -(dp943 +p988 +g976 +tp989 +(dp990 Vvdso -p944 +p991 I01 sVimage-file -p945 +p992 Vvmlinux -p946 +p993 ss(Vimage -p947 -g929 -tp948 -(dp949 +p994 +g976 +tp995 +(dp996 Vsuggests -p950 +p997 Vmkvmlinuz -p951 +p998 sVinstall-stem -p952 +p999 Vvmlinux -p953 +p1000 sVconfigs -p954 -(lp955 +p1001 +(lp1002 ss(Vimage -p956 -g929 +p1003 +g976 NVpowerpc64le -p957 -tp958 -(dp959 +p1004 +tp1005 +(dp1006 Vconfigs -p960 -(lp961 +p1007 +(lp1008 Vkernelarch-powerpc/config-arch-64 -p962 +p1009 aVkernelarch-powerpc/config-arch-64-le -p963 -ass(g128 -g929 -g96 -tp964 -(dp965 -g131 -(lp966 +p1010 +ass(g131 +g976 +g99 +tp1011 +(dp1012 +g134 +(lp1013 Vpowerpc64le -p967 -asg135 +p1014 +asg138 I01 ss(Vbase -p968 +p1015 Vs390 -p969 -tp970 -(dp971 +p1016 +tp1017 +(dp1018 Vfeaturesets -p972 -(lp973 +p1019 +(lp1020 sVkernel-arch -p974 +p1021 Vs390 -p975 +p1022 ss(Vbase -p976 +p1023 Vs390x -p977 -tp978 -(dp979 -g94 -(lp980 -g96 +p1024 +tp1025 +(dp1026 +g97 +(lp1027 +g99 asVkernel-arch -p981 +p1028 Vs390 -p982 +p1029 ss(Vdescription -p983 -g977 +p1030 +g1024 NVs390x -p984 -tp985 -(dp986 +p1031 +tp1032 +(dp1033 Vhardware -p987 +p1034 VIBM zSeries -p988 +p1035 ss(Vbuild -p989 -g977 -tp990 -(dp991 +p1036 +g1024 +tp1037 +(dp1038 Vvdso -p992 +p1039 I01 sVimage-file -p993 +p1040 Varch/s390/boot/image -p994 +p1041 ss(Vbuild -p995 -g977 +p1042 +g1024 NVs390x -p996 -tp997 -(dp998 +p1043 +tp1044 +(dp1045 Vdebug-info -p999 +p1046 I01 ss(Vrelations -p1000 -g977 -tp1001 -(dp1002 +p1047 +g1024 +tp1048 +(dp1049 Vheaders%gcc-6 -p1003 +p1050 Vlinux-compiler-gcc-6-s390 -p1004 +p1051 ss(Vimage -p1005 -g977 -tp1006 -(dp1007 +p1052 +g1024 +tp1053 +(dp1054 Vinstall-stem -p1008 +p1055 Vvmlinuz -p1009 +p1056 sVbootloaders -p1010 -(lp1011 +p1057 +(lp1058 Vs390-tools -p1012 -ass(g128 -g977 -g96 -tp1013 -(dp1014 -g131 -(lp1015 +p1059 +ass(g131 +g1024 +g99 +tp1060 +(dp1061 +g134 +(lp1062 Vs390x -p1016 -asg135 +p1063 +asg138 I01 ss(Vbase -p1017 +p1064 Vsh3 -p1018 -tp1019 -(dp1020 +p1065 +tp1066 +(dp1067 Vfeaturesets -p1021 -(lp1022 +p1068 +(lp1069 sVkernel-arch -p1023 +p1070 Vsh -p1024 +p1071 ss(Vbase -p1025 +p1072 Vsh4 -p1026 -tp1027 -(dp1028 -g94 -(lp1029 -g96 +p1073 +tp1074 +(dp1075 +g97 +(lp1076 +g99 asVkernel-arch -p1030 +p1077 Vsh -p1031 +p1078 ss(Vbuild -p1032 -g1026 -tp1033 -(dp1034 +p1079 +g1073 +tp1080 +(dp1081 Vsigned-modules -p1035 +p1082 I00 sVimage-file -p1036 +p1083 Varch/sh/boot/zImage -p1037 +p1084 ss(Vdescription -p1038 -g1026 +p1085 +g1073 NVsh7751r -p1039 -tp1040 -(dp1041 +p1086 +tp1087 +(dp1088 Vhardware -p1042 +p1089 Vsh7751r -p1043 +p1090 sVhardware-long -p1044 +p1091 VRenesas SH7751R R2D plus board -p1045 +p1092 ss(Vdescription -p1046 -g1026 +p1093 +g1073 NVsh7785lcr -p1047 -tp1048 -(dp1049 +p1094 +tp1095 +(dp1096 Vhardware -p1050 +p1097 Vsh7785lcr -p1051 +p1098 sVhardware-long -p1052 +p1099 VRenesas SH7785 reference board -p1053 +p1100 ss(Vimage -p1054 -g1026 -tp1055 -(dp1056 +p1101 +g1073 +tp1102 +(dp1103 Vinstall-stem -p1057 +p1104 Vvmlinuz -p1058 +p1105 ss(Vimage -p1059 -g1026 +p1106 +g1073 NVsh7785lcr -p1060 -tp1061 -(dp1062 +p1107 +tp1108 +(dp1109 Vrecommends -p1063 +p1110 Vu-boot-tools -p1064 +p1111 sVcheck-size -p1065 +p1112 L4194304L -ss(g128 -g1026 -g96 -tp1066 -(dp1067 -g131 -(lp1068 +ss(g131 +g1073 +g99 +tp1113 +(dp1114 +g134 +(lp1115 Vsh7751r -p1069 +p1116 aVsh7785lcr -p1070 -asg135 +p1117 +asg138 I01 ss(Vbase -p1071 +p1118 Vsparc -p1072 -tp1073 -(dp1074 +p1119 +tp1120 +(dp1121 Vfeaturesets -p1075 -(lp1076 +p1122 +(lp1123 sVkernel-arch -p1077 +p1124 Vsparc -p1078 +p1125 ss(Vbase -p1079 +p1126 Vsparc64 -p1080 -tp1081 -(dp1082 -g94 -(lp1083 -g96 +p1127 +tp1128 +(dp1129 +g97 +(lp1130 +g99 asVkernel-arch -p1084 +p1131 Vsparc -p1085 +p1132 ss(Vbuild -p1086 -g1080 -tp1087 -(dp1088 +p1133 +g1127 +tp1134 +(dp1135 Vsigned-modules -p1089 +p1136 I00 sVimage-file -p1090 +p1137 Varch/sparc/boot/zImage -p1091 +p1138 ss(Vimage -p1092 -g1080 +p1139 +g1127 NVsparc64 -p1093 -tp1094 -(dp1095 +p1140 +tp1141 +(dp1142 Vconfigs -p1096 -(lp1097 +p1143 +(lp1144 Vkernelarch-sparc/config-up -p1098 +p1145 ass(Vimage -p1099 -g1080 +p1146 +g1127 NVsparc64-smp -p1100 -tp1101 -(dp1102 +p1147 +tp1148 +(dp1149 Vconfigs -p1103 -(lp1104 +p1150 +(lp1151 Vkernelarch-sparc/config-smp -p1105 +p1152 ass(Vimage -p1106 -g1080 -tp1107 -(dp1108 +p1153 +g1127 +tp1154 +(dp1155 Vsuggests -p1109 +p1156 Vsilo, fdutils -p1110 +p1157 sVinstall-stem -p1111 +p1158 Vvmlinuz -p1112 +p1159 sVconfigs -p1113 -(lp1114 +p1160 +(lp1161 ss(Vdescription -p1115 -g1080 +p1162 +g1127 NVsparc64-smp -p1116 -tp1117 -(dp1118 +p1163 +tp1164 +(dp1165 Vhardware -p1119 +p1166 Vmultiprocessor 64-bit UltraSPARC -p1120 +p1167 ss(Vdescription -p1121 -g1080 +p1168 +g1127 NVsparc64 -p1122 -tp1123 -(dp1124 +p1169 +tp1170 +(dp1171 Vhardware -p1125 +p1172 Vuniprocessor 64-bit UltraSPARC -p1126 -ss(g128 -g1080 -g96 -tp1127 -(dp1128 -g131 -(lp1129 +p1173 +ss(g131 +g1127 +g99 +tp1174 +(dp1175 +g134 +(lp1176 Vsparc64 -p1130 +p1177 aVsparc64-smp -p1131 -asg135 +p1178 +asg138 I01 ss(Vbase -p1132 +p1179 Vtilegx -p1133 -tp1134 -(dp1135 +p1180 +tp1181 +(dp1182 Vfeaturesets -p1136 -(lp1137 +p1183 +(lp1184 sVkernel-arch -p1138 +p1185 Vtile -p1139 +p1186 ss(Vbase -p1140 +p1187 Vx32 -p1141 -tp1142 -(dp1143 +p1188 +tp1189 +(dp1190 Vfeaturesets -p1144 -(lp1145 +p1191 +(lp1192 sVkernel-arch -p1146 +p1193 Vx86 -p1147 +p1194 ss(Vdescription -p1148 +p1195 NVrt -p1149 -tp1150 -(dp1151 +p1196 +tp1197 +(dp1198 Vparts -p1152 -(lp1153 +p1199 +(lp1200 Vrt -p1154 +p1201 asVpart-long-rt -p1155 +p1202 VThis kernel includes the PREEMPT_RT realtime patch set. -p1156 +p1203 sVpart-short-rt -p1157 +p1204 VPREEMPT_RT -p1158 +p1205 ss(Vabi -p1159 -Ng1149 -tp1160 -(dp1161 +p1206 +Ng1196 +tp1207 +(dp1208 Vignore-changes -p1162 -(lp1163 +p1209 +(lp1210 V* -p1164 +p1211 ass(Vversion -p1165 -tp1166 -(dp1167 +p1212 +tp1213 +(dp1214 Vupstream -p1168 +p1215 V4.9 -p1169 +p1216 sVsource -p1170 -V4.9.13-1 -p1171 +p1217 +V4.9.13-1+rpi1 +p1218 sVabiname -p1172 +p1219 V4.9.0-2 -p1173 +p1220 sVabiname_base -p1174 +p1221 V4.9.0 -p1175 +p1222 ss. \ No newline at end of file diff -Nru linux-4.9.13/debian/control linux-4.9-4.9.13/debian/control --- linux-4.9.13/debian/control 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/control 2017-03-12 01:46:12.000000000 +0000 @@ -1,16 +1,16 @@ -Source: linux +Source: linux-4.9 Section: kernel Priority: optional Maintainer: Debian Kernel Team Uploaders: Bastian Blank , maximilian attems , Ben Hutchings , Salvatore Bonaccorso Standards-Version: 3.9.8 -Build-Depends: debhelper (>= 10.1~), dh-exec, python3:any, quilt, cpio , xz-utils , kernel-wedge (>= 2.93~) , kmod , bc , libssl-dev:native , libssl-dev [linux-any] , openssl (>= 1.1.0-1~) | openssl:native , asciidoc-base | asciidoc , xmlto , bison , flex (>= 2.6.1-1.1~) | flex:native , gcc-multilib [amd64 ppc64 s390x sparc64] , libaudit-dev , libbabeltrace-dev (>= 1.5.0) , libbabeltrace-ctf-dev (>= 1.5.0) , libdw-dev , libelf-dev , libiberty-dev , libnewt-dev , libnuma-dev [amd64 arm64 hppa i386 mips mips64 mips64el mipsel mipsn32 mipsn32el mipsr6 mipsr6el mipsn32r6 mipsn32r6el mips64r6 mips64r6el powerpc powerpcspe ppc64 ppc64el sparc x32] , libperl-dev , libunwind8-dev [amd64 armel armhf arm64 i386] , python-dev , autoconf , automake , libtool , libglib2.0-dev , libudev-dev , libwrap0-dev , rsync , libpci-dev , dh-python , gcc-6 [alpha amd64 arm64 armel armhf hppa i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390x sh4 sparc64] , gcc-6-alpha-linux-gnu:native [alpha] , gcc-6-x86-64-linux-gnu:native [amd64] , gcc-6-aarch64-linux-gnu:native [arm64] , gcc-6-arm-linux-gnueabi:native [armel] , gcc-6-arm-linux-gnueabihf:native [armhf] , binutils-hppa64-linux-gnu [hppa] , gcc-6-hppa64-linux-gnu [hppa] , gcc-6-hppa-linux-gnu:native [hppa] , binutils-hppa64-linux-gnu:native [hppa] , gcc-6-hppa64-linux-gnu:native [hppa] , gcc-6-i686-linux-gnu:native [i386] , gcc-6-m68k-linux-gnu:native [m68k] , gcc-6-mips-linux-gnu:native [mips] , gcc-6-mipsel-linux-gnu:native [mipsel] , gcc-6-mips64-linux-gnuabi64:native [mips64] , gcc-6-mips64el-linux-gnuabi64:native [mips64el] , gcc-6-powerpc-linux-gnu:native [powerpc] , gcc-6-powerpc-linux-gnuspe:native [powerpcspe] , gcc-6-powerpc64-linux-gnu:native [ppc64] , gcc-6-powerpc64le-linux-gnu:native [ppc64el] , gcc-6-s390x-linux-gnu:native [s390x] , gcc-6-sh4-linux-gnu:native [sh4] , gcc-6-sparc64-linux-gnu:native [sparc64] +Build-Depends: debhelper, dh-exec, python3:any, quilt, cpio , xz-utils , kernel-wedge (>= 2.93~) , kmod , bc , libssl-dev:native , libssl-dev [linux-any] , openssl (>= 1.1.0-1~) | openssl:native , asciidoc | asciidoc-base , xmlto , bison , flex | flex:native , gcc-multilib [amd64 ppc64 s390x sparc64] , libaudit-dev , libbabeltrace-dev , libbabeltrace-ctf-dev , libdw-dev , libelf-dev , libiberty-dev , libnewt-dev , libnuma-dev [amd64 arm64 hppa i386 mips mips64 mips64el mipsel mipsn32 mipsn32el mipsr6 mipsr6el mipsn32r6 mipsn32r6el mips64r6 mips64r6el powerpc powerpcspe ppc64 ppc64el sparc x32] , libperl-dev , libunwind8-dev [amd64 armel armhf arm64 i386] , python-dev , autoconf , automake , libtool , libglib2.0-dev , libudev-dev , libwrap0-dev , rsync , libpci-dev , dh-python , gcc-4.9 [alpha amd64 arm64 armel armhf hppa i386 m68k mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390x sh4 sparc64] , gcc-6-alpha-linux-gnu:native [alpha] , gcc-6-x86-64-linux-gnu:native [amd64] , gcc-6-aarch64-linux-gnu:native [arm64] , gcc-6-arm-linux-gnueabi:native [armel] , gcc-6-arm-linux-gnueabihf:native [armhf] , gcc-6-hppa-linux-gnu:native [hppa] , gcc-6-i586-linux-gnu:native [i386] , gcc-6-m68k-linux-gnu:native [m68k] , gcc-6-mips-linux-gnu:native [mips] , gcc-6-mipsel-linux-gnu:native [mipsel] , gcc-6-mips64-linux-gnuabi64:native [mips64] , gcc-6-mips64el-linux-gnuabi64:native [mips64el] , gcc-6-powerpc-linux-gnu:native [powerpc] , gcc-6-powerpc-linux-gnuspe:native [powerpcspe] , gcc-6-powerpc64-linux-gnu:native [ppc64] , gcc-6-powerpc64le-linux-gnu:native [ppc64el] , gcc-6-s390x-linux-gnu:native [s390x] , gcc-6-sh4-linux-gnu:native [sh4] , gcc-6-sparc64-linux-gnu:native [sparc64] Build-Depends-Indep: patchutils , python-sphinx , python-sphinx-rtd-theme , xmlto Homepage: https://www.kernel.org/ Vcs-Browser: https://anonscm.debian.org/cgit/kernel/linux.git Vcs-Git: https://anonscm.debian.org/git/kernel/linux.git -Package: linux-source-4.9 +Package: linux-4.9-source-4.9 Architecture: all Section: kernel Depends: binutils, xz-utils, ${misc:Depends} @@ -25,7 +25,7 @@ Build-Profiles: Multi-Arch: foreign -Package: linux-support-4.9.0-2 +Package: linux-4.9-support-4.9.0-2 Architecture: all Section: devel Depends: ${python3:Depends}, ${misc:Depends} @@ -36,7 +36,7 @@ Build-Profiles: Multi-Arch: foreign -Package: linux-doc-4.9 +Package: linux-4.9-doc-4.9 Architecture: all Section: doc Depends: ${misc:Depends} @@ -50,7 +50,7 @@ Build-Profiles: Multi-Arch: foreign -Package: linux-manual-4.9 +Package: linux-4.9-manual-4.9 Architecture: all Section: doc Provides: linux-manual @@ -203,17 +203,6 @@ Build-Profiles: Multi-Arch: foreign -Package: linux-libc-dev -Architecture: alpha amd64 arm64 armel armhf hppa i386 m68k mips mips64 mips64el mipsel mipsn32 mipsn32el powerpc powerpcspe ppc64 ppc64el s390 s390x sh3 sh4 sparc sparc64 tilegx x32 -Section: devel -Provides: linux-kernel-headers -Depends: ${misc:Depends} -Description: Linux support headers for userspace development - This package provides userspaces headers from the Linux kernel. These - headers are used by the installed headers for GNU libc and other system - libraries. -Multi-Arch: same - Package: linux-headers-4.9.0-2-all Architecture: alpha amd64 arm64 armel armhf hppa i386 m68k mips mips64 mips64el mipsel powerpc powerpcspe ppc64 ppc64el s390x sh4 sparc64 Depends: linux-headers-4.9.0-2-all-${kernel:Arch} (= ${binary:Version}), ${misc:Depends} @@ -733,7 +722,7 @@ Package: linux-headers-4.9.0-2-alpha-generic Architecture: alpha -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-alpha-generic This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-alpha-generic, generally used for building @@ -764,7 +753,7 @@ Package: linux-headers-4.9.0-2-alpha-smp Architecture: alpha -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-alpha-smp This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-alpha-smp, generally used for building out-of-tree @@ -791,2557 +780,6496 @@ kernel modules. Build-Profiles: -Package: linux-image-4.9.0-2-amd64-unsigned -Architecture: amd64 -Provides: linux-image-4.9.0-2-amd64 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [amd64] | linux-initramfs-tool [amd64] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [amd64] | grub-efi-amd64 [amd64] | extlinux [amd64] -Replaces: linux-image-4.9.0-2-amd64 -Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [amd64], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-amd64 -Description: Linux 4.9 for 64-bit PCs - The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or - VIA Nano processors. - . - This kernel also runs on a Xen hypervisor. It supports both privileged - (dom0) and unprivileged (domU) operation. -Build-Profiles: - -Package: linux-headers-4.9.0-2-amd64 -Architecture: amd64 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-x86 -Description: Header files for Linux 4.9.0-2-amd64 - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-amd64, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-amd64, and can be used for building modules - that load into the kernel provided by the linux-image-4.9.0-2-amd64 - package. -Build-Profiles: - -Package: linux-image-4.9.0-2-amd64-dbgsym -Architecture: amd64 -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-amd64 -Build-Profiles: - -Package: linux-image-4.9.0-2-rt-amd64-unsigned -Architecture: amd64 -Provides: linux-image-4.9.0-2-rt-amd64 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [amd64] | linux-initramfs-tool [amd64] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [amd64] | grub-efi-amd64 [amd64] | extlinux [amd64] -Replaces: linux-image-4.9.0-2-rt-amd64 -Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [amd64], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-rt-amd64 -Description: Linux 4.9 for 64-bit PCs, PREEMPT_RT - The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or - VIA Nano processors. - . - This kernel includes the PREEMPT_RT realtime patch set. -Build-Profiles: - -Package: linux-headers-4.9.0-2-rt-amd64 -Architecture: amd64 -Depends: linux-headers-4.9.0-2-common-rt (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-x86 -Description: Header files for Linux 4.9.0-2-rt-amd64 - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-rt-amd64, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-rt-amd64, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-rt-amd64 package. -Build-Profiles: - -Package: linux-image-4.9.0-2-rt-amd64-dbgsym +Package: kernel-image-4.9.0-2-amd64-di Architecture: amd64 -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-rt-amd64 -Build-Profiles: - -Package: linux-headers-4.9.0-2-all-arm64 -Architecture: arm64 -Depends: ${misc:Depends}, linux-headers-4.9.0-2-arm64 (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. -Build-Profiles: - -Package: linux-image-4.9.0-2-arm64-unsigned -Architecture: arm64 -Provides: linux-image-4.9.0-2-arm64 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [arm64] | linux-initramfs-tool [arm64] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Replaces: linux-image-4.9.0-2-arm64 -Breaks: libmozjs185-1.0 [arm64], libmozjs-24-0 (<< 24.2.0-5.1~) [arm64], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-arm64 -Description: Linux 4.9 for 64-bit ARMv8 machines - The Linux kernel 4.9 and modules for use on 64-bit ARMv8 machines. -Build-Profiles: - -Package: linux-headers-4.9.0-2-arm64 -Architecture: arm64 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-arm64 - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-arm64, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-arm64, and can be used for building modules - that load into the kernel provided by the linux-image-4.9.0-2-arm64 - package. -Build-Profiles: - -Package: linux-image-4.9.0-2-arm64-dbgsym -Architecture: arm64 -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-arm64 -Build-Profiles: - -Package: linux-headers-4.9.0-2-all-armel -Architecture: armel -Depends: ${misc:Depends}, linux-headers-4.9.0-2-marvell (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. -Build-Profiles: - -Package: kernel-image-4.9.0-2-marvell-di -Architecture: armel Section: debian-installer Priority: standard -Provides: kernel-image, rtc-modules +Provides: kernel-image, zlib-modules Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: nic-modules-4.9.0-2-marvell-di -Architecture: armel +Package: nic-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-marvell-di, nic-shared-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, nic-shared-modules-4.9.0-2-amd64-di, i2c-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-marvell-di -Architecture: armel +Package: nic-wireless-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-amd64-di, nic-shared-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di, mmc-modules-4.9.0-2-amd64-di, pcmcia-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-marvell-di -Architecture: armel +Package: serial-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-amd64-di, pcmcia-modules-4.9.0-2-amd64-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: ppp-modules-4.9.0-2-marvell-di -Architecture: armel +Package: ppp-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, serial-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-marvell-di -Architecture: armel +Package: pata-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-amd64-di, ata-modules-4.9.0-2-amd64-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di, isofs-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di, isofs-modules-4.9.0-2-amd64-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-marvell-di -Architecture: armel +Package: firewire-core-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: firewire-core-modules +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di +Description: Core FireWire drivers + This package contains core FireWire drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: loop-modules-4.9.0-2-marvell-di -Architecture: armel +Package: scsi-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard -Provides: loop-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: Loopback filesystem support - This package contains loopback filesystem support for the kernel. +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di, cdrom-core-modules-4.9.0-2-amd64-di, ata-modules-4.9.0-2-amd64-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: ipv6-modules-4.9.0-2-marvell-di -Architecture: armel +Package: loop-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer -Priority: extra -Provides: ipv6-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: IPv6 driver - This package contains the IPv6 driver for the kernel. +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: btrfs-modules-4.9.0-2-marvell-di -Architecture: armel +Package: btrfs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di, md-modules-4.9.0-2-amd64-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: ext4-modules-4.9.0-2-marvell-di -Architecture: armel +Package: ext4-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: isofs-modules-4.9.0-2-marvell-di -Architecture: armel +Package: isofs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell -Package-Type: udeb - -Package: jffs2-modules-4.9.0-2-marvell-di -Architecture: armel -Section: debian-installer -Priority: extra -Provides: jffs2-modules -Depends: kernel-image-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di -Description: JFFS2 filesystem support - This package contains the JFFS2 filesystem module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: jfs-modules-4.9.0-2-marvell-di -Architecture: armel +Package: jfs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: fat-modules-4.9.0-2-marvell-di -Architecture: armel +Package: ntfs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra -Provides: fat-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: FAT filesystem support - This package contains the FAT and VFAT filesystem modules for the kernel. +Provides: ntfs-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: NTFS filesystem support + This package contains the NTFS file system module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: minix-modules-4.9.0-2-marvell-di -Architecture: armel +Package: xfs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer -Priority: extra -Provides: minix-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: Minix filesystem support - This package contains the Minix filesystem module for the kernel. +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: md-modules-4.9.0-2-marvell-di -Architecture: armel +Package: fat-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: fat-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: md-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: multipath-modules-4.9.0-2-marvell-di -Architecture: armel +Package: multipath-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, md-modules-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: usb-modules-4.9.0-2-marvell-di -Architecture: armel +Package: usb-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-marvell-di -Architecture: armel +Package: usb-storage-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: fb-modules-4.9.0-2-marvell-di -Architecture: armel +Package: pcmcia-storage-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: pcmcia-storage-modules +Depends: kernel-image-4.9.0-2-amd64-di, cdrom-core-modules-4.9.0-2-amd64-di, pcmcia-modules-4.9.0-2-amd64-di, ata-modules-4.9.0-2-amd64-di +Description: PCMCIA storage drivers + This package contains PCMCIA storage drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: fb-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: fb-modules -Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, i2c-modules-4.9.0-2-amd64-di Description: Frame buffer support This package contains Frame buffer drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: input-modules-4.9.0-2-marvell-di -Architecture: armel +Package: input-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di, i2c-modules-4.9.0-2-amd64-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: event-modules-4.9.0-2-marvell-di -Architecture: armel +Package: event-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: mouse-modules-4.9.0-2-marvell-di -Architecture: armel +Package: mouse-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: mouse-modules -Depends: kernel-image-4.9.0-2-marvell-di, event-modules-4.9.0-2-marvell-di, input-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, event-modules-4.9.0-2-amd64-di, input-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di Description: Mouse support This package contains mouse drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-marvell-di -Architecture: armel +Package: nic-pcmcia-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: nic-pcmcia-modules +Depends: kernel-image-4.9.0-2-amd64-di, nic-shared-modules-4.9.0-2-amd64-di, nic-wireless-modules-4.9.0-2-amd64-di, pcmcia-modules-4.9.0-2-amd64-di, mmc-core-modules-4.9.0-2-amd64-di +Description: Common PCMCIA NIC drivers + This package contains common PCMCIA NIC drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: pcmcia-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: standard +Provides: pcmcia-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: Common PCMCIA drivers + This package contains common PCMCIA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-marvell-di, nic-shared-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, nic-shared-modules-4.9.0-2-amd64-di, nic-wireless-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: sata-modules-4.9.0-2-marvell-di -Architecture: armel +Package: sata-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di, ata-modules-4.9.0-2-amd64-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: crc-modules-4.9.0-2-marvell-di -Architecture: armel +Package: acpi-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: acpi-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: ACPI support modules + This package contains kernel modules for ACPI. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: i2c-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: i2c support modules + This package contains basic i2c support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: crc-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: crypto-modules-4.9.0-2-marvell-di -Architecture: armel +Package: crypto-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-marvell-di -Architecture: armel +Package: crypto-dm-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, md-modules-4.9.0-2-amd64-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: mmc-modules-4.9.0-2-marvell-di -Architecture: armel +Package: efi-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: efi-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: EFI modules + This package contains EFI modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: ata-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: mmc-core-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: mmc-core-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: MMC/SD/SDIO core modules + This package contains core modules for MMC/SD/SDIO support. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: mmc-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: mmc-modules -Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, mmc-core-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: MMC/SD card modules This package contains modules needed to support MMC (multimedia) and SD cards. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: nbd-modules-4.9.0-2-marvell-di -Architecture: armel +Package: nbd-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: squashfs-modules-4.9.0-2-marvell-di -Architecture: armel +Package: squashfs-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: uinput-modules-4.9.0-2-marvell-di -Architecture: armel +Package: speakup-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: speakup-modules +Depends: kernel-image-4.9.0-2-amd64-di +Description: speakup modules + This package contains speakup modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-amd64-di +Architecture: amd64 +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-amd64 +Package-Type: udeb + +Package: uinput-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: uinput-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: uinput support This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: zlib-modules-4.9.0-2-marvell-di -Architecture: armel +Package: sound-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra -Provides: zlib-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: zlib modules - This package contains zlib modules. +Provides: sound-modules +Depends: kernel-image-4.9.0-2-amd64-di, i2c-modules-4.9.0-2-amd64-di, usb-modules-4.9.0-2-amd64-di, pcmcia-modules-4.9.0-2-amd64-di, firewire-core-modules-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di +Description: sound support + This package contains sound modules. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: leds-modules-4.9.0-2-marvell-di -Architecture: armel +Package: hyperv-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra -Provides: leds-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: LED modules - This package contains LED modules. +Provides: hyperv-modules +Depends: kernel-image-4.9.0-2-amd64-di, input-modules-4.9.0-2-amd64-di, scsi-core-modules-4.9.0-2-amd64-di +Description: Hyper-V modules + This package contains Hyper-V paravirtualised drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: udf-modules-4.9.0-2-marvell-di -Architecture: armel +Package: udf-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di, crc-modules-4.9.0-2-amd64-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: fuse-modules-4.9.0-2-marvell-di -Architecture: armel +Package: fuse-modules-4.9.0-2-amd64-di +Architecture: amd64 Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-marvell-di +Depends: kernel-image-4.9.0-2-amd64-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell +Kernel-Version: 4.9.0-2-amd64 Package-Type: udeb -Package: mtd-modules-4.9.0-2-marvell-di -Architecture: armel -Section: debian-installer -Priority: extra -Provides: mtd-modules -Depends: kernel-image-4.9.0-2-marvell-di -Description: MTD modules - This package contains MTD modules. +Package: linux-image-4.9.0-2-amd64 +Architecture: amd64 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [amd64] | linux-initramfs-tool [amd64] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [amd64] | grub-efi-amd64 [amd64] | extlinux [amd64] +Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [amd64], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for 64-bit PCs + The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or + VIA Nano processors. + . + This kernel also runs on a Xen hypervisor. It supports both privileged + (dom0) and unprivileged (domU) operation. Build-Profiles: -Kernel-Version: 4.9.0-2-marvell -Package-Type: udeb -Package: linux-image-4.9.0-2-marvell -Architecture: armel -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armel] | linux-initramfs-tool [armel] -Recommends: firmware-linux-free, ${kernel:Recommends}, u-boot-tools [armel] -Suggests: linux-doc-4.9, debian-kernel-handbook -Breaks: flash-kernel (<< 3.57~) [armel], initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for Marvell Kirkwood/Orion - The Linux kernel 4.9 and modules for use on Marvell Kirkwood based systems - (SheevaPlug, QNAP TS-119/TS-219, etc) and Orion 5181, 5182 and 5281 based - systems (QNAP TS-109/TS-209, etc). +Package: linux-headers-4.9.0-2-amd64 +Architecture: amd64 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-amd64 + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-amd64, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-amd64, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-amd64 + package. Build-Profiles: -Package: linux-headers-4.9.0-2-marvell -Architecture: armel -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-arm -Description: Header files for Linux 4.9.0-2-marvell - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-marvell, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-marvell, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-marvell package. -Build-Profiles: - -Package: linux-image-4.9.0-2-marvell-dbgsym -Architecture: armel -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-marvell -Build-Profiles: - -Package: linux-headers-4.9.0-2-all-armhf -Architecture: armhf -Depends: ${misc:Depends}, linux-headers-4.9.0-2-armmp (= ${binary:Version}), linux-headers-4.9.0-2-armmp-lpae (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. -Build-Profiles: - -Package: linux-image-4.9.0-2-armmp-unsigned -Architecture: armhf -Provides: linux-image-4.9.0-2-armmp -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armhf] | linux-initramfs-tool [armhf] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Replaces: linux-image-4.9.0-2-armmp -Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-armmp -Description: Linux 4.9 for ARMv7 multiplatform compatible SoCs - The Linux kernel 4.9 and modules for use on ARMv7 multiplatform kernel. - See https://wiki.debian.org/DebianKernel/ARMMP for details of supported - platforms. -Build-Profiles: - -Package: linux-headers-4.9.0-2-armmp -Architecture: armhf -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-arm -Description: Header files for Linux 4.9.0-2-armmp - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-armmp, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-armmp, and can be used for building modules - that load into the kernel provided by the linux-image-4.9.0-2-armmp - package. -Build-Profiles: - -Package: linux-image-4.9.0-2-armmp-dbgsym -Architecture: armhf +Package: linux-image-4.9.0-2-amd64-dbgsym +Architecture: amd64 Section: debug Priority: extra Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-armmp +Description: Debug symbols for linux-image-4.9.0-2-amd64 Build-Profiles: -Package: linux-image-4.9.0-2-armmp-lpae-unsigned -Architecture: armhf -Provides: linux-image-4.9.0-2-armmp-lpae -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armhf] | linux-initramfs-tool [armhf] +Package: linux-image-4.9.0-2-rt-amd64 +Architecture: amd64 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [amd64] | linux-initramfs-tool [amd64] Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Replaces: linux-image-4.9.0-2-armmp-lpae -Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-armmp-lpae -Description: Linux 4.9 for ARMv7 multiplatform compatible SoCs supporting LPAE - The Linux kernel 4.9 and modules for use on ARMv7 multiplatform kernel - supporting LPAE. See https://wiki.debian.org/DebianKernel/ARMMP for - details of supported platforms.. +Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [amd64] | grub-efi-amd64 [amd64] | extlinux [amd64] +Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [amd64], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for 64-bit PCs, PREEMPT_RT + The Linux kernel 4.9 and modules for use on PCs with AMD64, Intel 64 or + VIA Nano processors. + . + This kernel includes the PREEMPT_RT realtime patch set. Build-Profiles: -Package: linux-headers-4.9.0-2-armmp-lpae -Architecture: armhf -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-arm -Description: Header files for Linux 4.9.0-2-armmp-lpae +Package: linux-headers-4.9.0-2-rt-amd64 +Architecture: amd64 +Depends: linux-headers-4.9.0-2-common-rt (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-rt-amd64 This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-armmp-lpae, generally used for building out-of-tree + Linux kernel 4.9.0-2-rt-amd64, generally used for building out-of-tree kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-armmp-lpae, and can be used for building + /usr/src/linux-headers-4.9.0-2-rt-amd64, and can be used for building modules that load into the kernel provided by the - linux-image-4.9.0-2-armmp-lpae package. + linux-image-4.9.0-2-rt-amd64 package. Build-Profiles: -Package: linux-image-4.9.0-2-armmp-lpae-dbgsym -Architecture: armhf +Package: linux-image-4.9.0-2-rt-amd64-dbgsym +Architecture: amd64 Section: debug Priority: extra Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-armmp-lpae +Description: Debug symbols for linux-image-4.9.0-2-rt-amd64 Build-Profiles: -Package: linux-headers-4.9.0-2-all-hppa -Architecture: hppa -Depends: ${misc:Depends}, linux-headers-4.9.0-2-parisc (= ${binary:Version}), linux-headers-4.9.0-2-parisc64-smp (= ${binary:Version}) +Package: linux-headers-4.9.0-2-all-arm64 +Architecture: arm64 +Depends: ${misc:Depends}, linux-headers-4.9.0-2-arm64 (= ${binary:Version}) Description: All header files for Linux 4.9 (meta-package) This package depends against all architecture-specific kernel header files for Linux kernel version 4.9, generally used for building out-of-tree kernel modules. Build-Profiles: -Package: kernel-image-4.9.0-2-parisc-di -Architecture: hppa +Package: kernel-image-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard -Provides: kernel-image +Provides: kernel-image, zlib-modules Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: nic-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: nic-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-parisc-di, nic-shared-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, nic-shared-modules-4.9.0-2-arm64-di, i2c-modules-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: nic-wireless-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard -Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-parisc-di -Description: Shared NIC drivers - This package contains NIC drivers needed by combinations of nic-modules, - nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. -Build-Profiles: -Kernel-Version: 4.9.0-2-parisc -Package-Type: udeb - -Package: serial-modules-4.9.0-2-parisc-di -Architecture: hppa -Section: debian-installer -Priority: optional -Provides: serial-modules -Depends: kernel-image-4.9.0-2-parisc-di -Description: Serial drivers - This package contains serial drivers for the kernel. +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-arm64-di, nic-shared-modules-4.9.0-2-arm64-di, usb-modules-4.9.0-2-arm64-di, mmc-modules-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: nic-shared-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer -Priority: optional -Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di -Description: USB serial drivers - This package contains USB serial drivers for the kernel. +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: ppp-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: ppp-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-parisc-di, serial-modules-4.9.0-2-parisc-di, zlib-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc -Package-Type: udeb - -Package: pata-modules-4.9.0-2-parisc-di -Architecture: hppa -Section: debian-installer -Priority: standard -Provides: pata-modules -Depends: kernel-image-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di -Description: PATA drivers - This package contains PATA drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: cdrom-core-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, isofs-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di, isofs-modules-4.9.0-2-arm64-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: scsi-core-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: scsi-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: scsi-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, cdrom-core-modules-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di, cdrom-core-modules-4.9.0-2-arm64-di, ata-modules-4.9.0-2-arm64-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: loop-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: loop-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: btrfs-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: btrfs-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di, zlib-modules-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di, md-modules-4.9.0-2-arm64-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: ext4-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: ext4-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: isofs-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: isofs-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: jfs-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: jfs-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: xfs-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: xfs-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: fat-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: fat-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: md-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: md-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: multipath-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: multipath-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, md-modules-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: usb-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: usb-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: usb-storage-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di, usb-modules-4.9.0-2-arm64-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: input-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: fb-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: fb-modules +Depends: kernel-image-4.9.0-2-arm64-di, i2c-modules-4.9.0-2-arm64-di +Description: Frame buffer support + This package contains Frame buffer drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: input-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, usb-modules-4.9.0-2-arm64-di, i2c-modules-4.9.0-2-arm64-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: event-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: event-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc -Package-Type: udeb - -Package: mouse-modules-4.9.0-2-parisc-di -Architecture: hppa -Section: debian-installer -Priority: extra -Provides: mouse-modules -Depends: kernel-image-4.9.0-2-parisc-di, event-modules-4.9.0-2-parisc-di, input-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di -Description: Mouse support - This package contains mouse drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: nic-usb-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-parisc-di, nic-shared-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, nic-shared-modules-4.9.0-2-arm64-di, nic-wireless-modules-4.9.0-2-arm64-di, usb-modules-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: sata-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: sata-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di, ata-modules-4.9.0-2-arm64-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: crc-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: i2c-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra -Provides: crc-modules -Depends: kernel-image-4.9.0-2-parisc-di -Description: CRC modules - This package contains CRC support modules. +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: i2c support modules + This package contains basic i2c support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: crypto-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: crc-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: crypto-dm-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, md-modules-4.9.0-2-arm64-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: ata-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: efi-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: efi-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: EFI modules + This package contains EFI modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: ata-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: ata-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di Description: ATA disk modules This package contains core ATA disk modules used by both PATA and SATA disk drivers. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: nbd-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: mmc-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-arm64-di, usb-modules-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: squashfs-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: squashfs-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: virtio-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: virtio-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di, scsi-core-modules-4.9.0-2-arm64-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: zlib-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: uinput-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra -Provides: zlib-modules -Depends: kernel-image-4.9.0-2-parisc-di -Description: zlib modules - This package contains zlib modules. +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: uinput support + This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: fuse-modules-4.9.0-2-parisc-di -Architecture: hppa +Package: leds-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: leds-modules +Depends: kernel-image-4.9.0-2-arm64-di +Description: LED modules + This package contains LED modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: udf-modules-4.9.0-2-arm64-di +Architecture: arm64 +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-arm64-di, crc-modules-4.9.0-2-arm64-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-arm64 +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-arm64-di +Architecture: arm64 Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-parisc-di +Depends: kernel-image-4.9.0-2-arm64-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc +Kernel-Version: 4.9.0-2-arm64 Package-Type: udeb -Package: kernel-image-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: linux-image-4.9.0-2-arm64 +Architecture: arm64 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [arm64] | linux-initramfs-tool [arm64] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: libmozjs185-1.0 [arm64], libmozjs-24-0 (<< 24.2.0-5.1~) [arm64], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for 64-bit ARMv8 machines + The Linux kernel 4.9 and modules for use on 64-bit ARMv8 machines. +Build-Profiles: + +Package: linux-headers-4.9.0-2-arm64 +Architecture: arm64 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-arm64 + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-arm64, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-arm64, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-arm64 + package. +Build-Profiles: + +Package: linux-image-4.9.0-2-arm64-dbgsym +Architecture: arm64 +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-arm64 +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-armel +Architecture: armel +Depends: ${misc:Depends}, linux-headers-4.9.0-2-marvell (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard -Provides: kernel-image, i2c-modules +Provides: kernel-image, rtc-modules Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: nic-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: nic-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, nic-shared-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, nic-shared-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: nic-shared-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp -Package-Type: udeb - -Package: serial-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa -Section: debian-installer -Priority: optional -Provides: serial-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di -Description: Serial drivers - This package contains serial drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: usb-serial-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: ppp-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: ppp-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, serial-modules-4.9.0-2-parisc64-smp-di, zlib-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp -Package-Type: udeb - -Package: pata-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa -Section: debian-installer -Priority: standard -Provides: pata-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di -Description: PATA drivers - This package contains PATA drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: cdrom-core-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, isofs-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di, isofs-modules-4.9.0-2-marvell-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: scsi-core-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: scsi-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: loop-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard -Provides: scsi-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, cdrom-core-modules-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di -Description: SCSI drivers - This package contains SCSI drivers for the kernel. +Provides: loop-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: loop-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: ipv6-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer -Priority: standard -Provides: loop-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di -Description: Loopback filesystem support - This package contains loopback filesystem support for the kernel. +Priority: extra +Provides: ipv6-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: IPv6 driver + This package contains the IPv6 driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: btrfs-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: btrfs-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di, zlib-modules-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: ext4-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: ext4-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: isofs-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: isofs-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: jfs-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: jffs2-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer -Priority: standard -Provides: jfs-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di -Description: JFS filesystem support - This package contains the JFS filesystem module for the kernel. +Priority: extra +Provides: jffs2-modules +Depends: kernel-image-4.9.0-2-marvell-di, zlib-modules-4.9.0-2-marvell-di +Description: JFFS2 filesystem support + This package contains the JFFS2 filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: xfs-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: jfs-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard -Provides: xfs-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di -Description: XFS filesystem support - This package contains the XFS filesystem module for the kernel. +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: fat-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: fat-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: md-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: minix-modules-4.9.0-2-marvell-di +Architecture: armel +Section: debian-installer +Priority: extra +Provides: minix-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: Minix filesystem support + This package contains the Minix filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-marvell +Package-Type: udeb + +Package: md-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: multipath-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: multipath-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: usb-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: usb-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: usb-storage-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: fb-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: fb-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer -Priority: standard +Priority: extra Provides: fb-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di Description: Frame buffer support This package contains Frame buffer drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: input-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: input-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: event-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: event-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: mouse-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: mouse-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: mouse-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, event-modules-4.9.0-2-parisc64-smp-di, input-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, event-modules-4.9.0-2-marvell-di, input-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di Description: Mouse support This package contains mouse drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: nic-usb-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, nic-shared-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, nic-shared-modules-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: sata-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: sata-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, scsi-core-modules-4.9.0-2-marvell-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: crc-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: crc-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: crypto-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: crypto-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: crypto-dm-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di, md-modules-4.9.0-2-marvell-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: ata-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: mmc-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra -Provides: ata-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di -Description: ATA disk modules - This package contains core ATA disk modules used by both PATA and SATA - disk drivers. +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-marvell-di, usb-modules-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: nbd-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: nbd-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: squashfs-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: squashfs-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: virtio-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: uinput-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra -Provides: virtio-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di -Description: virtio modules - This package contains virtio modules. +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: uinput support + This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: zlib-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: zlib-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: zlib-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: zlib modules This package contains zlib modules. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: fuse-modules-4.9.0-2-parisc64-smp-di -Architecture: hppa +Package: leds-modules-4.9.0-2-marvell-di +Architecture: armel +Section: debian-installer +Priority: extra +Provides: leds-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: LED modules + This package contains LED modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-marvell +Package-Type: udeb + +Package: udf-modules-4.9.0-2-marvell-di +Architecture: armel +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-marvell-di, crc-modules-4.9.0-2-marvell-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-marvell +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-marvell-di +Architecture: armel Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-parisc64-smp-di +Depends: kernel-image-4.9.0-2-marvell-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-parisc64-smp +Kernel-Version: 4.9.0-2-marvell Package-Type: udeb -Package: linux-image-4.9.0-2-parisc -Architecture: hppa -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [hppa] | linux-initramfs-tool [hppa] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, palo [hppa] -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for 32-bit PA-RISC - The Linux kernel 4.9 and modules for use on HP PA-RISC 32-bit systems with - max 4 GB RAM. -Build-Profiles: - -Package: linux-headers-4.9.0-2-parisc -Architecture: hppa -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6, binutils-hppa64-linux-gnu, gcc-6-hppa64-linux-gnu -Description: Header files for Linux 4.9.0-2-parisc - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-parisc, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-parisc, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-parisc package. -Build-Profiles: - -Package: linux-image-4.9.0-2-parisc-dbgsym -Architecture: hppa -Section: debug +Package: mtd-modules-4.9.0-2-marvell-di +Architecture: armel +Section: debian-installer Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-parisc +Provides: mtd-modules +Depends: kernel-image-4.9.0-2-marvell-di +Description: MTD modules + This package contains MTD modules. Build-Profiles: +Kernel-Version: 4.9.0-2-marvell +Package-Type: udeb -Package: linux-image-4.9.0-2-parisc64-smp -Architecture: hppa -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [hppa] | linux-initramfs-tool [hppa] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, palo [hppa] -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for multiprocessor 64-bit PA-RISC - The Linux kernel 4.9 and modules for use on HP PA-RISC 64-bit SMP systems - with support for more than 4 GB RAM. +Package: linux-image-4.9.0-2-marvell +Architecture: armel +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armel] | linux-initramfs-tool [armel] +Recommends: firmware-linux-free, ${kernel:Recommends}, u-boot-tools [armel] +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: flash-kernel (<< 3.57~) [armel], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for Marvell Kirkwood/Orion + The Linux kernel 4.9 and modules for use on Marvell Kirkwood based systems + (SheevaPlug, QNAP TS-119/TS-219, etc) and Orion 5181, 5182 and 5281 based + systems (QNAP TS-109/TS-209, etc). Build-Profiles: -Package: linux-headers-4.9.0-2-parisc64-smp -Architecture: hppa -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6, binutils-hppa64-linux-gnu, gcc-6-hppa64-linux-gnu -Description: Header files for Linux 4.9.0-2-parisc64-smp +Package: linux-headers-4.9.0-2-marvell +Architecture: armel +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-marvell This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-parisc64-smp, generally used for building out-of-tree + Linux kernel 4.9.0-2-marvell, generally used for building out-of-tree kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-parisc64-smp, and can be used for building + /usr/src/linux-headers-4.9.0-2-marvell, and can be used for building modules that load into the kernel provided by the - linux-image-4.9.0-2-parisc64-smp package. + linux-image-4.9.0-2-marvell package. Build-Profiles: -Package: linux-image-4.9.0-2-parisc64-smp-dbgsym -Architecture: hppa +Package: linux-image-4.9.0-2-marvell-dbgsym +Architecture: armel Section: debug Priority: extra Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-parisc64-smp +Description: Debug symbols for linux-image-4.9.0-2-marvell Build-Profiles: -Package: linux-headers-4.9.0-2-all-i386 -Architecture: i386 -Depends: ${misc:Depends}, linux-headers-4.9.0-2-686 (= ${binary:Version}), linux-headers-4.9.0-2-686-pae (= ${binary:Version}), linux-headers-4.9.0-2-rt-686-pae (= ${binary:Version}) +Package: linux-headers-4.9.0-2-all-armhf +Architecture: armhf +Depends: ${misc:Depends}, linux-headers-4.9.0-2-rpi (= ${binary:Version}), linux-headers-4.9.0-2-rpi2 (= ${binary:Version}) Description: All header files for Linux 4.9 (meta-package) This package depends against all architecture-specific kernel header files for Linux kernel version 4.9, generally used for building out-of-tree kernel modules. Build-Profiles: -Package: linux-image-4.9.0-2-686-unsigned -Architecture: i386 -Provides: linux-image-4.9.0-2-686 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] -Replaces: linux-image-4.9.0-2-686 -Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-686 -Description: Linux 4.9 for older PCs - The Linux kernel 4.9 and modules for use on PCs with one or more - processors not supporting PAE. -Build-Profiles: - -Package: linux-headers-4.9.0-2-686 -Architecture: i386 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-x86 -Description: Header files for Linux 4.9.0-2-686 - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-686, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-686, and can be used for building modules - that load into the kernel provided by the linux-image-4.9.0-2-686 package. +Package: kernel-image-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: kernel-image +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-image-4.9.0-2-686-dbgsym -Architecture: i386 -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-686 +Package: scsi-core-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-image-4.9.0-2-686-pae-unsigned -Architecture: i386 -Provides: linux-image-4.9.0-2-686-pae -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] -Replaces: linux-image-4.9.0-2-686-pae -Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-686-pae -Description: Linux 4.9 for modern PCs - The Linux kernel 4.9 and modules for use on PCs with one or more - processors supporting PAE. - . - This kernel requires PAE (Physical Address Extension). This feature is - supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD - Geode NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom; - Transmeta Efficeon; VIA C7; and some other processors. - . - This kernel also runs on a Xen hypervisor. It supports both privileged - (dom0) and unprivileged (domU) operation. +Package: loop-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-headers-4.9.0-2-686-pae -Architecture: i386 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-x86 -Description: Header files for Linux 4.9.0-2-686-pae - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-686-pae, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-686-pae, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-686-pae package. +Package: btrfs-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-rpi-di, crc-modules-4.9.0-2-rpi-di, md-modules-4.9.0-2-rpi-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-image-4.9.0-2-686-pae-dbgsym -Architecture: i386 -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-686-pae +Package: isofs-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-image-4.9.0-2-rt-686-pae-unsigned -Architecture: i386 -Provides: linux-image-4.9.0-2-rt-686-pae -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] -Replaces: linux-image-4.9.0-2-rt-686-pae -Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-rt-686-pae -Description: Linux 4.9 for modern PCs, PREEMPT_RT - The Linux kernel 4.9 and modules for use on PCs with one or more - processors supporting PAE. - . - This kernel requires PAE (Physical Address Extension). This feature is - supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD - Geode NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom; - Transmeta Efficeon; VIA C7; and some other processors. - . - This kernel includes the PREEMPT_RT realtime patch set. +Package: jfs-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-headers-4.9.0-2-rt-686-pae -Architecture: i386 -Depends: linux-headers-4.9.0-2-common-rt (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-x86 -Description: Header files for Linux 4.9.0-2-rt-686-pae - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-rt-686-pae, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-rt-686-pae, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-rt-686-pae package. +Package: minix-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: minix-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: Minix filesystem support + This package contains the Minix filesystem module for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-image-4.9.0-2-rt-686-pae-dbgsym -Architecture: i386 -Section: debug +Package: md-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-rt-686-pae +Provides: md-modules +Depends: kernel-image-4.9.0-2-rpi-di, crc-modules-4.9.0-2-rpi-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: linux-headers-4.9.0-2-all-m68k -Architecture: m68k -Depends: ${misc:Depends}, linux-headers-4.9.0-2-m68k (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. +Package: multipath-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-rpi-di, md-modules-4.9.0-2-rpi-di, scsi-core-modules-4.9.0-2-rpi-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb -Package: kernel-image-4.9.0-2-m68k-di -Architecture: m68k +Package: usb-storage-modules-4.9.0-2-rpi-di +Architecture: armhf Section: debian-installer Priority: standard -Provides: kernel-image -Description: Linux kernel image and core modules for the Debian installer - This package contains the kernel image and core modules for the Debian - installer boot images. It does _not_ provide a usable kernel for your - full Debian system. +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-rpi-di, scsi-core-modules-4.9.0-2-rpi-di +Description: USB storage support + This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-rpi Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: input-modules-4.9.0-2-rpi-di +Architecture: armhf Section: debian-installer -Priority: standard -Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-m68k-di -Description: Shared NIC drivers - This package contains NIC drivers needed by combinations of nic-modules, - nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: Input devices support + This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-rpi Package-Type: udeb -Package: ppp-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: nic-usb-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-rpi-di, crc-modules-4.9.0-2-rpi-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: crc-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-rpi-di, md-modules-4.9.0-2-rpi-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: uinput-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: uinput support + This package contains the uinput module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: udf-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-rpi-di, crc-modules-4.9.0-2-rpi-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-rpi-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-rpi-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi +Package-Type: udeb + +Package: kernel-image-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: kernel-image +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: loop-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-rpi2-di, crc-modules-4.9.0-2-rpi2-di, md-modules-4.9.0-2-rpi2-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: minix-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: minix-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: Minix filesystem support + This package contains the Minix filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: md-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-rpi2-di, crc-modules-4.9.0-2-rpi2-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-rpi2-di, md-modules-4.9.0-2-rpi2-di, scsi-core-modules-4.9.0-2-rpi2-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-rpi2-di, scsi-core-modules-4.9.0-2-rpi2-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: input-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-rpi2-di, crc-modules-4.9.0-2-rpi2-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: crc-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-rpi2-di, md-modules-4.9.0-2-rpi2-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: uinput-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: uinput support + This package contains the uinput module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: udf-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-rpi2-di, crc-modules-4.9.0-2-rpi2-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-rpi2-di +Architecture: armhf +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-rpi2-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-rpi2 +Package-Type: udeb + +Package: linux-image-4.9.0-2-rpi +Architecture: armhf +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armhf] | linux-initramfs-tool [armhf] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for RaspberryPI + The Linux kernel 4.9 and modules for use on Raspberry PI. +Build-Profiles: + +Package: linux-headers-4.9.0-2-rpi +Architecture: armhf +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-rpi + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-rpi, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-rpi, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-rpi package. +Build-Profiles: + +Package: linux-image-4.9.0-2-rpi-dbgsym +Architecture: armhf +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-rpi +Build-Profiles: + +Package: linux-image-4.9.0-2-rpi2 +Architecture: armhf +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [armhf] | linux-initramfs-tool [armhf] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for RaspberryPI2 + The Linux kernel 4.9 and modules for use on Raspberry PI 2. +Build-Profiles: + +Package: linux-headers-4.9.0-2-rpi2 +Architecture: armhf +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-rpi2 + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-rpi2, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-rpi2, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-rpi2 + package. +Build-Profiles: + +Package: linux-image-4.9.0-2-rpi2-dbgsym +Architecture: armhf +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-rpi2 +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-hppa +Architecture: hppa +Depends: ${misc:Depends}, linux-headers-4.9.0-2-parisc (= ${binary:Version}), linux-headers-4.9.0-2-parisc64-smp (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: kernel-image +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: nic-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-parisc-di, nic-shared-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: serial-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-parisc-di, serial-modules-4.9.0-2-parisc-di, zlib-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: pata-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, isofs-modules-4.9.0-2-parisc-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, cdrom-core-modules-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: loop-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di, zlib-modules-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: fat-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: md-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: usb-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: USB support + This package contains core USB drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: input-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: event-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: event-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Event support + This package contains event drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: mouse-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-parisc-di, event-modules-4.9.0-2-parisc-di, input-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-parisc-di, nic-shared-modules-4.9.0-2-parisc-di, usb-modules-4.9.0-2-parisc-di, crc-modules-4.9.0-2-parisc-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: sata-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di, ata-modules-4.9.0-2-parisc-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: crc-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-parisc-di, md-modules-4.9.0-2-parisc-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: ata-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-parisc-di, scsi-core-modules-4.9.0-2-parisc-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: zlib-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: zlib modules + This package contains zlib modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-parisc-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-parisc-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc +Package-Type: udeb + +Package: kernel-image-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: kernel-image, i2c-modules +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: nic-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, nic-shared-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: serial-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, serial-modules-4.9.0-2-parisc64-smp-di, zlib-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: pata-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, isofs-modules-4.9.0-2-parisc64-smp-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, cdrom-core-modules-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: loop-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di, zlib-modules-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: fat-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: md-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: usb-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: USB support + This package contains core USB drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: fb-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: fb-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Frame buffer support + This package contains Frame buffer drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: input-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: event-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: event-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Event support + This package contains event drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: mouse-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, event-modules-4.9.0-2-parisc64-smp-di, input-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, nic-shared-modules-4.9.0-2-parisc64-smp-di, usb-modules-4.9.0-2-parisc64-smp-di, crc-modules-4.9.0-2-parisc64-smp-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: sata-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di, ata-modules-4.9.0-2-parisc64-smp-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: crc-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, md-modules-4.9.0-2-parisc64-smp-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: ata-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di, scsi-core-modules-4.9.0-2-parisc64-smp-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: zlib-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: zlib modules + This package contains zlib modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-parisc64-smp-di +Architecture: hppa +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-parisc64-smp-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-parisc64-smp +Package-Type: udeb + +Package: linux-image-4.9.0-2-parisc +Architecture: hppa +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [hppa] | linux-initramfs-tool [hppa] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, palo [hppa] +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for 32-bit PA-RISC + The Linux kernel 4.9 and modules for use on HP PA-RISC 32-bit systems with + max 4 GB RAM. +Build-Profiles: + +Package: linux-headers-4.9.0-2-parisc +Architecture: hppa +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-parisc + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-parisc, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-parisc, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-parisc package. +Build-Profiles: + +Package: linux-image-4.9.0-2-parisc-dbgsym +Architecture: hppa +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-parisc +Build-Profiles: + +Package: linux-image-4.9.0-2-parisc64-smp +Architecture: hppa +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [hppa] | linux-initramfs-tool [hppa] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, palo [hppa] +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for multiprocessor 64-bit PA-RISC + The Linux kernel 4.9 and modules for use on HP PA-RISC 64-bit SMP systems + with support for more than 4 GB RAM. +Build-Profiles: + +Package: linux-headers-4.9.0-2-parisc64-smp +Architecture: hppa +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-parisc64-smp + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-parisc64-smp, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-parisc64-smp, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-parisc64-smp package. +Build-Profiles: + +Package: linux-image-4.9.0-2-parisc64-smp-dbgsym +Architecture: hppa +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-parisc64-smp +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-i386 +Architecture: i386 +Depends: ${misc:Depends}, linux-headers-4.9.0-2-686 (= ${binary:Version}), linux-headers-4.9.0-2-686-pae (= ${binary:Version}), linux-headers-4.9.0-2-rt-686-pae (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: kernel-image, rtc-modules, zlib-modules +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nic-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-686-di, nic-shared-modules-4.9.0-2-686-di, i2c-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nic-wireless-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-686-di, nic-shared-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di, mmc-modules-4.9.0-2-686-di, pcmcia-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: serial-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-686-di, pcmcia-modules-4.9.0-2-686-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-686-di, serial-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: pata-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-686-di, ata-modules-4.9.0-2-686-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di, isofs-modules-4.9.0-2-686-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: firewire-core-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: firewire-core-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: Core FireWire drivers + This package contains core FireWire drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di, cdrom-core-modules-4.9.0-2-686-di, ata-modules-4.9.0-2-686-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: loop-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di, md-modules-4.9.0-2-686-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-686-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-686-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: ntfs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: ntfs-modules +Depends: kernel-image-4.9.0-2-686-di +Description: NTFS filesystem support + This package contains the NTFS file system module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: fat-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: fat-modules +Depends: kernel-image-4.9.0-2-686-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: md-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-686-di, md-modules-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: usb-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-686-di +Description: USB support + This package contains core USB drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: pcmcia-storage-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pcmcia-storage-modules +Depends: kernel-image-4.9.0-2-686-di, cdrom-core-modules-4.9.0-2-686-di, pcmcia-modules-4.9.0-2-686-di, ata-modules-4.9.0-2-686-di +Description: PCMCIA storage drivers + This package contains PCMCIA storage drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: fb-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: fb-modules +Depends: kernel-image-4.9.0-2-686-di, i2c-modules-4.9.0-2-686-di +Description: Frame buffer support + This package contains Frame buffer drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: input-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di, i2c-modules-4.9.0-2-686-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: event-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: event-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Event support + This package contains event drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: mouse-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-686-di, event-modules-4.9.0-2-686-di, input-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nic-pcmcia-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-pcmcia-modules +Depends: kernel-image-4.9.0-2-686-di, nic-shared-modules-4.9.0-2-686-di, nic-wireless-modules-4.9.0-2-686-di, pcmcia-modules-4.9.0-2-686-di, mmc-core-modules-4.9.0-2-686-di +Description: Common PCMCIA NIC drivers + This package contains common PCMCIA NIC drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: pcmcia-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pcmcia-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Common PCMCIA drivers + This package contains common PCMCIA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-686-di, nic-shared-modules-4.9.0-2-686-di, nic-wireless-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: sata-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di, ata-modules-4.9.0-2-686-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: acpi-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: acpi-modules +Depends: kernel-image-4.9.0-2-686-di +Description: ACPI support modules + This package contains kernel modules for ACPI. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: i2c-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-686-di +Description: i2c support modules + This package contains basic i2c support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: crc-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-686-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-686-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-686-di, md-modules-4.9.0-2-686-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: efi-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: efi-modules +Depends: kernel-image-4.9.0-2-686-di +Description: EFI modules + This package contains EFI modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: ata-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: mmc-core-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mmc-core-modules +Depends: kernel-image-4.9.0-2-686-di +Description: MMC/SD/SDIO core modules + This package contains core modules for MMC/SD/SDIO support. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: mmc-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-686-di, mmc-core-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-686-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-686-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: speakup-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: speakup-modules +Depends: kernel-image-4.9.0-2-686-di +Description: speakup modules + This package contains speakup modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: uinput-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-686-di +Description: uinput support + This package contains the uinput module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: sound-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: sound-modules +Depends: kernel-image-4.9.0-2-686-di, i2c-modules-4.9.0-2-686-di, usb-modules-4.9.0-2-686-di, pcmcia-modules-4.9.0-2-686-di, firewire-core-modules-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: sound support + This package contains sound modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: hyperv-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: hyperv-modules +Depends: kernel-image-4.9.0-2-686-di, input-modules-4.9.0-2-686-di, scsi-core-modules-4.9.0-2-686-di +Description: Hyper-V modules + This package contains Hyper-V paravirtualised drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: udf-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-686-di, crc-modules-4.9.0-2-686-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-686-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-686-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686 +Package-Type: udeb + +Package: kernel-image-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: kernel-image, rtc-modules, zlib-modules +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nic-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-686-pae-di, nic-shared-modules-4.9.0-2-686-pae-di, i2c-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nic-wireless-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-686-pae-di, nic-shared-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di, mmc-modules-4.9.0-2-686-pae-di, pcmcia-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: serial-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-686-pae-di, pcmcia-modules-4.9.0-2-686-pae-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-686-pae-di, serial-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: pata-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-686-pae-di, ata-modules-4.9.0-2-686-pae-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di, isofs-modules-4.9.0-2-686-pae-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: firewire-core-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: firewire-core-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: Core FireWire drivers + This package contains core FireWire drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di, cdrom-core-modules-4.9.0-2-686-pae-di, ata-modules-4.9.0-2-686-pae-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: loop-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di, md-modules-4.9.0-2-686-pae-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: ntfs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: ntfs-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: NTFS filesystem support + This package contains the NTFS file system module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: fat-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: fat-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: md-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-686-pae-di, md-modules-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: usb-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: USB support + This package contains core USB drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: pcmcia-storage-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pcmcia-storage-modules +Depends: kernel-image-4.9.0-2-686-pae-di, cdrom-core-modules-4.9.0-2-686-pae-di, pcmcia-modules-4.9.0-2-686-pae-di, ata-modules-4.9.0-2-686-pae-di +Description: PCMCIA storage drivers + This package contains PCMCIA storage drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: fb-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: fb-modules +Depends: kernel-image-4.9.0-2-686-pae-di, i2c-modules-4.9.0-2-686-pae-di +Description: Frame buffer support + This package contains Frame buffer drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: input-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di, i2c-modules-4.9.0-2-686-pae-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: event-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: event-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Event support + This package contains event drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: mouse-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-686-pae-di, event-modules-4.9.0-2-686-pae-di, input-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nic-pcmcia-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-pcmcia-modules +Depends: kernel-image-4.9.0-2-686-pae-di, nic-shared-modules-4.9.0-2-686-pae-di, nic-wireless-modules-4.9.0-2-686-pae-di, pcmcia-modules-4.9.0-2-686-pae-di, mmc-core-modules-4.9.0-2-686-pae-di +Description: Common PCMCIA NIC drivers + This package contains common PCMCIA NIC drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: pcmcia-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: pcmcia-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Common PCMCIA drivers + This package contains common PCMCIA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-686-pae-di, nic-shared-modules-4.9.0-2-686-pae-di, nic-wireless-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: sata-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di, ata-modules-4.9.0-2-686-pae-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: acpi-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: acpi-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: ACPI support modules + This package contains kernel modules for ACPI. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: i2c-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: i2c support modules + This package contains basic i2c support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: crc-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-686-pae-di, md-modules-4.9.0-2-686-pae-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: efi-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: efi-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: EFI modules + This package contains EFI modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: ata-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: mmc-core-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mmc-core-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: MMC/SD/SDIO core modules + This package contains core modules for MMC/SD/SDIO support. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: mmc-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-686-pae-di, mmc-core-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: speakup-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: speakup-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: speakup modules + This package contains speakup modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: uinput-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: uinput support + This package contains the uinput module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: sound-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: sound-modules +Depends: kernel-image-4.9.0-2-686-pae-di, i2c-modules-4.9.0-2-686-pae-di, usb-modules-4.9.0-2-686-pae-di, pcmcia-modules-4.9.0-2-686-pae-di, firewire-core-modules-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: sound support + This package contains sound modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: hyperv-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: hyperv-modules +Depends: kernel-image-4.9.0-2-686-pae-di, input-modules-4.9.0-2-686-pae-di, scsi-core-modules-4.9.0-2-686-pae-di +Description: Hyper-V modules + This package contains Hyper-V paravirtualised drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: udf-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-686-pae-di, crc-modules-4.9.0-2-686-pae-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-686-pae-di +Architecture: i386 +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-686-pae-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-686-pae +Package-Type: udeb + +Package: linux-image-4.9.0-2-686 +Architecture: i386 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] +Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for older PCs + The Linux kernel 4.9 and modules for use on PCs with one or more + processors not supporting PAE. +Build-Profiles: + +Package: linux-headers-4.9.0-2-686 +Architecture: i386 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-686 + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-686, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-686, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-686 package. +Build-Profiles: + +Package: linux-image-4.9.0-2-686-dbgsym +Architecture: i386 +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-686 +Build-Profiles: + +Package: linux-image-4.9.0-2-686-pae +Architecture: i386 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] +Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for modern PCs + The Linux kernel 4.9 and modules for use on PCs with one or more + processors supporting PAE. + . + This kernel requires PAE (Physical Address Extension). This feature is + supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD + Geode NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom; + Transmeta Efficeon; VIA C7; and some other processors. + . + This kernel also runs on a Xen hypervisor. It supports both privileged + (dom0) and unprivileged (domU) operation. +Build-Profiles: + +Package: linux-headers-4.9.0-2-686-pae +Architecture: i386 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-686-pae + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-686-pae, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-686-pae, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-686-pae package. +Build-Profiles: + +Package: linux-image-4.9.0-2-686-pae-dbgsym +Architecture: i386 +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-686-pae +Build-Profiles: + +Package: linux-image-4.9.0-2-rt-686-pae +Architecture: i386 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [i386] | linux-initramfs-tool [i386] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, grub-pc [i386] | extlinux [i386] +Breaks: xserver-xorg-input-vmmouse (<< 1:13.0.99) [i386], initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for modern PCs, PREEMPT_RT + The Linux kernel 4.9 and modules for use on PCs with one or more + processors supporting PAE. + . + This kernel requires PAE (Physical Address Extension). This feature is + supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD + Geode NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom; + Transmeta Efficeon; VIA C7; and some other processors. + . + This kernel includes the PREEMPT_RT realtime patch set. +Build-Profiles: + +Package: linux-headers-4.9.0-2-rt-686-pae +Architecture: i386 +Depends: linux-headers-4.9.0-2-common-rt (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-rt-686-pae + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-rt-686-pae, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-rt-686-pae, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-rt-686-pae package. +Build-Profiles: + +Package: linux-image-4.9.0-2-rt-686-pae-dbgsym +Architecture: i386 +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-rt-686-pae +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-m68k +Architecture: m68k +Depends: ${misc:Depends}, linux-headers-4.9.0-2-m68k (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: kernel-image +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-m68k-di, zlib-modules-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-m68k-di, isofs-modules-4.9.0-2-m68k-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-m68k-di, cdrom-core-modules-4.9.0-2-m68k-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di, zlib-modules-4.9.0-2-m68k-di, md-modules-4.9.0-2-m68k-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: fat-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: md-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: crc-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: zlib-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: zlib modules + This package contains zlib modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: udf-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-m68k-di +Architecture: m68k +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-m68k-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-m68k +Package-Type: udeb + +Package: linux-image-4.9.0-2-m68k +Architecture: m68k +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [m68k] | linux-initramfs-tool [m68k] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook, vmelilo [m68k], fdutils [m68k] +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for Motorola MC68020+ family + The Linux kernel 4.9 and modules for use on Motorola MC68020+ family. +Build-Profiles: + +Package: linux-headers-4.9.0-2-m68k +Architecture: m68k +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-m68k + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-m68k, generally used for building out-of-tree kernel + modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-m68k, and can be used for building modules + that load into the kernel provided by the linux-image-4.9.0-2-m68k + package. +Build-Profiles: + +Package: linux-image-4.9.0-2-m68k-dbgsym +Architecture: m68k +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-m68k +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-mips +Architecture: mips +Depends: ${misc:Depends}, linux-headers-4.9.0-2-4kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: kernel-image, rtc-modules +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: nic-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: nic-wireless-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, mmc-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: optional +Provides: ppp-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, zlib-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: PPP drivers + This package contains PPP drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: pata-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: cdrom-core-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, isofs-modules-4.9.0-2-4kc-malta-di +Description: CDROM support + This package contains core CDROM support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, cdrom-core-modules-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: loop-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di, zlib-modules-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: ntfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: ntfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: NTFS filesystem support + This package contains the NTFS file system module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: fat-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: hfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: hfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: HFS filesystem support + This package contains the HFS and HFS+ filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: affs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: affs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Amiga filesystem support + This package contains the Amiga filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: minix-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: minix-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Minix filesystem support + This package contains the Minix filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: md-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: usb-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: USB support + This package contains core USB drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: usb-storage-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di +Description: USB storage support + This package contains the USB storage driver for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: input-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: input-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di +Description: Input devices support + This package contains input device drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: event-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: event-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Event support + This package contains event drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: mouse-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, event-modules-4.9.0-2-4kc-malta-di, input-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, nic-wireless-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: sata-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: i2c-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: i2c support modules + This package contains basic i2c support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: crc-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: ata-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: mmc-core-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: mmc-core-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: MMC/SD/SDIO core modules + This package contains core modules for MMC/SD/SDIO support. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: mmc-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, mmc-core-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: squashfs-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: squashfs-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: squashfs modules + This package contains squashfs modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: sound-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: sound-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: sound support + This package contains sound modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: zlib-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: zlib modules + This package contains zlib modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: udf-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-4kc-malta-di +Architecture: mips mipsel +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-4kc-malta-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-4kc-malta +Package-Type: udeb + +Package: kernel-image-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: kernel-image, rtc-modules +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: nic-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: nic-wireless-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: nic-wireless-modules +Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: Wireless NIC drivers + This package contains wireless NIC drivers for the kernel. Includes + crypto modules only needed for wireless (WEP, WPA). +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: nic-shared-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: nic-shared-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Shared NIC drivers + This package contains NIC drivers needed by combinations of nic-modules, + nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: optional +Provides: usb-serial-modules +Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Description: USB serial drivers + This package contains USB serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: ppp-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-m68k-di, zlib-modules-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di, zlib-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: pata-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: pata-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: PATA drivers + This package contains PATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: cdrom-core-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-m68k-di, isofs-modules-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, isofs-modules-4.9.0-2-octeon-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: scsi-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: scsi-core-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-m68k-di, cdrom-core-modules-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, cdrom-core-modules-4.9.0-2-octeon-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: loop-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di, zlib-modules-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: jfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: jfs-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: JFS filesystem support + This package contains the JFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: ntfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: ntfs-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: NTFS filesystem support + This package contains the NTFS file system module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: fat-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: hfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: hfs-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: HFS filesystem support + This package contains the HFS and HFS+ filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: affs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: affs-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Amiga filesystem support + This package contains the Amiga filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: minix-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: minix-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Minix filesystem support + This package contains the Minix filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: md-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: btrfs-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: multipath-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra -Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di, zlib-modules-4.9.0-2-m68k-di, md-modules-4.9.0-2-m68k-di -Description: BTRFS filesystem support - This package contains the BTRFS filesystem module for the kernel. +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: ext4-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: usb-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer -Priority: standard -Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di -Description: ext2/ext3/ext4 filesystem support - This package contains the ext4 filesystem module for the kernel, which - also supports ext2 and ext3. +Priority: extra +Provides: usb-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: USB support + This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: isofs-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: usb-storage-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: standard -Provides: isofs-modules -Depends: kernel-image-4.9.0-2-m68k-di -Description: ISOFS filesystem support - This package contains the ISOFS filesystem module for the kernel. +Provides: usb-storage-modules +Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Description: USB storage support + This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: fat-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: input-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra -Provides: fat-modules -Depends: kernel-image-4.9.0-2-m68k-di -Description: FAT filesystem support - This package contains the FAT and VFAT filesystem modules for the kernel. +Provides: input-modules +Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Description: Input devices support + This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: md-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: event-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra -Provides: md-modules -Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di -Description: RAID and LVM support - This package contains RAID and LVM modules for the kernel. +Provides: event-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: Event support + This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: crc-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: nic-usb-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: nic-usb-modules +Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, nic-wireless-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: USB NIC drivers + This package contains USB network adapter drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: sata-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Description: SATA drivers + This package contains SATA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: crc-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: crypto-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: crypto-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: nbd-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: crypto-dm-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: squashfs-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: squashfs-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: zlib-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: rtc-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: rtc-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: RTC modules + This package contains RTC modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: sound-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel +Section: debian-installer +Priority: extra +Provides: sound-modules +Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Description: sound support + This package contains sound modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: zlib-modules -Depends: kernel-image-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di Description: zlib modules This package contains zlib modules. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: udf-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: udf-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-m68k-di, crc-modules-4.9.0-2-m68k-di +Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-m68k +Kernel-Version: 4.9.0-2-octeon Package-Type: udeb -Package: fuse-modules-4.9.0-2-m68k-di -Architecture: m68k +Package: fuse-modules-4.9.0-2-octeon-di +Architecture: mips mips64 mips64el mipsel Section: debian-installer Priority: extra -Provides: fuse-modules -Depends: kernel-image-4.9.0-2-m68k-di -Description: FUSE modules - This package contains the Filesystem in Userspace (FUSE) module. +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-octeon-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-octeon +Package-Type: udeb + +Package: linux-image-4.9.0-2-4kc-malta +Architecture: mips mipsel +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel] | linux-initramfs-tool [mips mipsel] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for MIPS Malta + The Linux kernel 4.9 and modules for use on MIPS Malta boards. +Build-Profiles: + +Package: linux-headers-4.9.0-2-4kc-malta +Architecture: mips mipsel +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-4kc-malta + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-4kc-malta, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-4kc-malta, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-4kc-malta package. +Build-Profiles: + +Package: linux-image-4.9.0-2-4kc-malta-dbgsym +Architecture: mips mipsel +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-4kc-malta +Build-Profiles: + +Package: linux-image-4.9.0-2-5kc-malta +Architecture: mips mips64 mips64el mipsel +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel mips64 mips64el] | linux-initramfs-tool [mips mipsel mips64 mips64el] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for MIPS Malta (64-bit) + The Linux kernel 4.9 and modules for use on MIPS Malta boards (64-bit). +Build-Profiles: + +Package: linux-headers-4.9.0-2-5kc-malta +Architecture: mips mips64 mips64el mipsel +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-5kc-malta + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-5kc-malta, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-5kc-malta, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-5kc-malta package. +Build-Profiles: + +Package: linux-image-4.9.0-2-5kc-malta-dbgsym +Architecture: mips mips64 mips64el mipsel +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-5kc-malta Build-Profiles: -Kernel-Version: 4.9.0-2-m68k -Package-Type: udeb -Package: linux-image-4.9.0-2-m68k -Architecture: m68k -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [m68k] | linux-initramfs-tool [m68k] +Package: linux-image-4.9.0-2-octeon +Architecture: mips mips64 mips64el mipsel +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel mips64 mips64el] | linux-initramfs-tool [mips mipsel mips64 mips64el] Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, vmelilo [m68k], fdutils [m68k] +Suggests: linux-doc-4.9, debian-kernel-handbook Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for Motorola MC68020+ family - The Linux kernel 4.9 and modules for use on Motorola MC68020+ family. +Description: Linux 4.9 for Octeon + The Linux kernel 4.9 and modules for use on Cavium Networks Octeon. Build-Profiles: -Package: linux-headers-4.9.0-2-m68k -Architecture: m68k -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-m68k +Package: linux-headers-4.9.0-2-octeon +Architecture: mips mips64 mips64el mipsel +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-octeon This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-m68k, generally used for building out-of-tree kernel - modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-m68k, and can be used for building modules - that load into the kernel provided by the linux-image-4.9.0-2-m68k - package. + Linux kernel 4.9.0-2-octeon, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-octeon, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-octeon package. Build-Profiles: -Package: linux-image-4.9.0-2-m68k-dbgsym -Architecture: m68k +Package: linux-image-4.9.0-2-octeon-dbgsym +Architecture: mips mips64 mips64el mipsel Section: debug Priority: extra Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-m68k +Description: Debug symbols for linux-image-4.9.0-2-octeon Build-Profiles: -Package: linux-headers-4.9.0-2-all-mips -Architecture: mips -Depends: ${misc:Depends}, linux-headers-4.9.0-2-4kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) +Package: linux-headers-4.9.0-2-all-mipsel +Architecture: mipsel +Depends: ${misc:Depends}, linux-headers-4.9.0-2-4kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-loongson-3 (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) Description: All header files for Linux 4.9 (meta-package) This package depends against all architecture-specific kernel header files for Linux kernel version 4.9, generally used for building out-of-tree kernel modules. Build-Profiles: -Package: kernel-image-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: kernel-image-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard -Provides: kernel-image, rtc-modules +Provides: kernel-image, i2c-modules, rtc-modules Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: nic-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nic-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: nic-wireless-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nic-wireless-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: nic-wireless-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, mmc-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: Wireless NIC drivers This package contains wireless NIC drivers for the kernel. Includes crypto modules only needed for wireless (WEP, WPA). Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nic-shared-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: usb-serial-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: ppp-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: ppp-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, zlib-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, zlib-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: pata-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: pata-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: pata-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di Description: PATA drivers This package contains PATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: cdrom-core-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, isofs-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, isofs-modules-4.9.0-2-loongson-3-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: firewire-core-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel +Section: debian-installer +Priority: standard +Provides: firewire-core-modules +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Description: Core FireWire drivers + This package contains core FireWire drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-loongson-3 +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: scsi-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: scsi-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, cdrom-core-modules-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, cdrom-core-modules-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: loop-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: loop-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: btrfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: btrfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di, zlib-modules-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di, zlib-modules-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: ext4-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: ext4-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: isofs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: isofs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: jfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: jfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: ntfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: ntfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: ntfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: NTFS filesystem support This package contains the NTFS file system module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: xfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: xfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: fat-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: fat-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: hfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: hfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: hfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: HFS filesystem support This package contains the HFS and HFS+ filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: affs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: affs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: affs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Amiga filesystem support This package contains the Amiga filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: minix-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: minix-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: minix-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Minix filesystem support This package contains the Minix filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: md-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel +Section: debian-installer +Priority: extra +Provides: nfs-modules +Depends: kernel-image-4.9.0-2-loongson-3-di +Description: NFS filesystem support + This package contains the NFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-loongson-3 +Package-Type: udeb + +Package: md-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb - -Package: multipath-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel + +Package: multipath-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: usb-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: usb-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: usb-storage-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: input-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: fb-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel +Section: debian-installer +Priority: extra +Provides: fb-modules +Depends: kernel-image-4.9.0-2-loongson-3-di +Description: Frame buffer support + This package contains Frame buffer drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-loongson-3 +Package-Type: udeb + +Package: input-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: event-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: event-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta -Package-Type: udeb - -Package: mouse-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel -Section: debian-installer -Priority: extra -Provides: mouse-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, event-modules-4.9.0-2-4kc-malta-di, input-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di -Description: Mouse support - This package contains mouse drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nic-usb-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, nic-shared-modules-4.9.0-2-4kc-malta-di, nic-wireless-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, nic-wireless-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: sata-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: sata-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di, ata-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta -Package-Type: udeb - -Package: i2c-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel -Section: debian-installer -Priority: extra -Provides: i2c-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di -Description: i2c support modules - This package contains basic i2c support modules. -Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: crc-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: crc-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: crypto-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: crypto-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: crypto-dm-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, md-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: ata-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: ata-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: ata-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di Description: ATA disk modules This package contains core ATA disk modules used by both PATA and SATA disk drivers. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta -Package-Type: udeb - -Package: mmc-core-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel -Section: debian-installer -Priority: extra -Provides: mmc-core-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di -Description: MMC/SD/SDIO core modules - This package contains core modules for MMC/SD/SDIO support. -Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta -Package-Type: udeb - -Package: mmc-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel -Section: debian-installer -Priority: extra -Provides: mmc-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, mmc-core-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di -Description: MMC/SD card modules - This package contains modules needed to support MMC (multimedia) and SD - cards. -Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: nbd-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: nbd-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: squashfs-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: squashfs-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: virtio-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: speakup-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel +Section: debian-installer +Priority: extra +Provides: speakup-modules +Depends: kernel-image-4.9.0-2-loongson-3-di +Description: speakup modules + This package contains speakup modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-loongson-3 +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, scsi-core-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: sound-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: sound-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: sound-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, i2c-modules-4.9.0-2-4kc-malta-di, usb-modules-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, firewire-core-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: sound support This package contains sound modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: zlib-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: zlib-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: zlib-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: zlib modules This package contains zlib modules. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: udf-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: udf-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di, crc-modules-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: fuse-modules-4.9.0-2-4kc-malta-di -Architecture: mips mipsel +Package: fuse-modules-4.9.0-2-loongson-3-di +Architecture: mips64el mipsel Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-4kc-malta-di +Depends: kernel-image-4.9.0-2-loongson-3-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-4kc-malta +Kernel-Version: 4.9.0-2-loongson-3 Package-Type: udeb -Package: kernel-image-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: linux-image-4.9.0-2-loongson-3 +Architecture: mips64el mipsel +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mipsel mips64el] | linux-initramfs-tool [mipsel mips64el] +Recommends: firmware-linux-free, ${kernel:Recommends} +Suggests: linux-doc-4.9, debian-kernel-handbook +Breaks: initramfs-tools (<< 0.120+deb8u2) +Description: Linux 4.9 for Loongson 3A/3B + The Linux kernel 4.9 and modules for use on Loongson 3A or 3B based + systems (e.g. from Loongson or Lemote). +Build-Profiles: + +Package: linux-headers-4.9.0-2-loongson-3 +Architecture: mips64el mipsel +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 +Description: Header files for Linux 4.9.0-2-loongson-3 + This package provides the architecture-specific kernel header files for + Linux kernel 4.9.0-2-loongson-3, generally used for building out-of-tree + kernel modules. These files are going to be installed into + /usr/src/linux-headers-4.9.0-2-loongson-3, and can be used for building + modules that load into the kernel provided by the + linux-image-4.9.0-2-loongson-3 package. +Build-Profiles: + +Package: linux-image-4.9.0-2-loongson-3-dbgsym +Architecture: mips64el mipsel +Section: debug +Priority: extra +Depends: ${misc:Depends} +Description: Debug symbols for linux-image-4.9.0-2-loongson-3 +Build-Profiles: + +Package: linux-headers-4.9.0-2-all-mips64 +Architecture: mips64 +Depends: ${misc:Depends}, linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: kernel-image, rtc-modules @@ -3350,1726 +7278,1610 @@ installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: nic-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: nic-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: nic-wireless-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: nic-wireless-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: nic-wireless-modules -Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, mmc-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: Wireless NIC drivers This package contains wireless NIC drivers for the kernel. Includes crypto modules only needed for wireless (WEP, WPA). Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: nic-shared-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: usb-serial-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: ppp-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: ppp-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-octeon-di, zlib-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, zlib-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: pata-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: pata-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: pata-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di Description: PATA drivers This package contains PATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: cdrom-core-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, isofs-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, isofs-modules-4.9.0-2-5kc-malta-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: scsi-core-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: scsi-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: scsi-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, cdrom-core-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, cdrom-core-modules-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: loop-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: loop-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: btrfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: btrfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di, zlib-modules-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di, zlib-modules-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: ext4-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: ext4-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: isofs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: isofs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: jfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: jfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: ntfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: ntfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: ntfs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: NTFS filesystem support This package contains the NTFS file system module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: xfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: xfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: fat-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: fat-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: hfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: hfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: hfs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: HFS filesystem support This package contains the HFS and HFS+ filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: affs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: affs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: affs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Amiga filesystem support This package contains the Amiga filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: minix-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: minix-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: minix-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Minix filesystem support This package contains the Minix filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: md-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: md-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: multipath-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: multipath-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: usb-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: usb-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: usb-storage-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: input-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: input-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: event-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: event-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: mouse-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-5kc-malta-di, event-modules-4.9.0-2-5kc-malta-di, input-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-5kc-malta +Package-Type: udeb + +Package: nic-usb-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-octeon-di, nic-shared-modules-4.9.0-2-octeon-di, nic-wireless-modules-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, nic-wireless-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: USB NIC drivers This package contains USB network adapter drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: sata-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: sata-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: crc-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: i2c-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el +Section: debian-installer +Priority: extra +Provides: i2c-modules +Depends: kernel-image-4.9.0-2-5kc-malta-di +Description: i2c support modules + This package contains basic i2c support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-5kc-malta +Package-Type: udeb + +Package: crc-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: crypto-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: crypto-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: crypto-dm-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-octeon-di, md-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: nbd-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: ata-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el +Section: debian-installer +Priority: extra +Provides: ata-modules +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di +Description: ATA disk modules + This package contains core ATA disk modules used by both PATA and SATA + disk drivers. +Build-Profiles: +Kernel-Version: 4.9.0-2-5kc-malta +Package-Type: udeb + +Package: mmc-core-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el +Section: debian-installer +Priority: extra +Provides: mmc-core-modules +Depends: kernel-image-4.9.0-2-5kc-malta-di +Description: MMC/SD/SDIO core modules + This package contains core modules for MMC/SD/SDIO support. +Build-Profiles: +Kernel-Version: 4.9.0-2-5kc-malta +Package-Type: udeb + +Package: mmc-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el +Section: debian-installer +Priority: extra +Provides: mmc-modules +Depends: kernel-image-4.9.0-2-5kc-malta-di, mmc-core-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Description: MMC/SD card modules + This package contains modules needed to support MMC (multimedia) and SD + cards. +Build-Profiles: +Kernel-Version: 4.9.0-2-5kc-malta +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: squashfs-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: squashfs-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon -Package-Type: udeb - -Package: rtc-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel -Section: debian-installer -Priority: extra -Provides: rtc-modules -Depends: kernel-image-4.9.0-2-octeon-di -Description: RTC modules - This package contains RTC modules. -Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: virtio-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: virtio-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-octeon-di, scsi-core-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: sound-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: sound-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: sound-modules -Depends: kernel-image-4.9.0-2-octeon-di, usb-modules-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: sound support This package contains sound modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: zlib-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: zlib-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: zlib-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: zlib modules This package contains zlib modules. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: udf-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: udf-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-octeon-di, crc-modules-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: fuse-modules-4.9.0-2-octeon-di -Architecture: mips mips64 mips64el mipsel +Package: fuse-modules-4.9.0-2-5kc-malta-di +Architecture: mips64 mips64el Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-octeon-di +Depends: kernel-image-4.9.0-2-5kc-malta-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-octeon +Kernel-Version: 4.9.0-2-5kc-malta Package-Type: udeb -Package: linux-image-4.9.0-2-4kc-malta -Architecture: mips mipsel -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel] | linux-initramfs-tool [mips mipsel] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for MIPS Malta - The Linux kernel 4.9 and modules for use on MIPS Malta boards. -Build-Profiles: - -Package: linux-headers-4.9.0-2-4kc-malta -Architecture: mips mipsel -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-4kc-malta - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-4kc-malta, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-4kc-malta, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-4kc-malta package. -Build-Profiles: - -Package: linux-image-4.9.0-2-4kc-malta-dbgsym -Architecture: mips mipsel -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-4kc-malta -Build-Profiles: - -Package: linux-image-4.9.0-2-5kc-malta -Architecture: mips mips64 mips64el mipsel -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel mips64 mips64el] | linux-initramfs-tool [mips mipsel mips64 mips64el] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for MIPS Malta (64-bit) - The Linux kernel 4.9 and modules for use on MIPS Malta boards (64-bit). -Build-Profiles: - -Package: linux-headers-4.9.0-2-5kc-malta -Architecture: mips mips64 mips64el mipsel -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-5kc-malta - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-5kc-malta, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-5kc-malta, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-5kc-malta package. -Build-Profiles: - -Package: linux-image-4.9.0-2-5kc-malta-dbgsym -Architecture: mips mips64 mips64el mipsel -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-5kc-malta -Build-Profiles: - -Package: linux-image-4.9.0-2-octeon -Architecture: mips mips64 mips64el mipsel -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mips mipsel mips64 mips64el] | linux-initramfs-tool [mips mipsel mips64 mips64el] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for Octeon - The Linux kernel 4.9 and modules for use on Cavium Networks Octeon. -Build-Profiles: - -Package: linux-headers-4.9.0-2-octeon -Architecture: mips mips64 mips64el mipsel -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-octeon - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-octeon, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-octeon, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-octeon package. -Build-Profiles: - -Package: linux-image-4.9.0-2-octeon-dbgsym -Architecture: mips mips64 mips64el mipsel -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-octeon +Package: linux-headers-4.9.0-2-all-mips64el +Architecture: mips64el +Depends: ${misc:Depends}, linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-loongson-3 (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. Build-Profiles: -Package: linux-headers-4.9.0-2-all-mipsel -Architecture: mipsel -Depends: ${misc:Depends}, linux-headers-4.9.0-2-4kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-loongson-3 (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) +Package: linux-headers-4.9.0-2-all-powerpc +Architecture: powerpc +Depends: ${misc:Depends}, linux-headers-4.9.0-2-powerpc (= ${binary:Version}), linux-headers-4.9.0-2-powerpc-smp (= ${binary:Version}), linux-headers-4.9.0-2-powerpc64 (= ${binary:Version}) Description: All header files for Linux 4.9 (meta-package) This package depends against all architecture-specific kernel header files for Linux kernel version 4.9, generally used for building out-of-tree kernel modules. Build-Profiles: -Package: kernel-image-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: kernel-image-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard -Provides: kernel-image, i2c-modules, rtc-modules +Provides: kernel-image Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: nic-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: nic-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, nic-shared-modules-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 -Package-Type: udeb - -Package: nic-wireless-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel -Section: debian-installer -Priority: standard -Provides: nic-wireless-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di -Description: Wireless NIC drivers - This package contains wireless NIC drivers for the kernel. Includes - crypto modules only needed for wireless (WEP, WPA). -Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: nic-shared-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc +Package-Type: udeb + +Package: serial-modules-4.9.0-2-powerpc-di +Architecture: powerpc +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-powerpc-di, pcmcia-modules-4.9.0-2-powerpc-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: usb-serial-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, usb-modules-4.9.0-2-powerpc-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: ppp-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: ppp-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, zlib-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, serial-modules-4.9.0-2-powerpc-di, zlib-modules-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: pata-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: pata-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: pata-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, ata-modules-4.9.0-2-powerpc-di Description: PATA drivers This package contains PATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: cdrom-core-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, isofs-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di, isofs-modules-4.9.0-2-powerpc-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: firewire-core-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: firewire-core-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: firewire-core-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: Core FireWire drivers This package contains core FireWire drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: scsi-core-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: scsi-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: scsi-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, cdrom-core-modules-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di, cdrom-core-modules-4.9.0-2-powerpc-di, ata-modules-4.9.0-2-powerpc-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: loop-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: loop-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: btrfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: btrfs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di, zlib-modules-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di, zlib-modules-4.9.0-2-powerpc-di, md-modules-4.9.0-2-powerpc-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: ext4-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: ext4-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: isofs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: isofs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: jfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: jfs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 -Package-Type: udeb - -Package: ntfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel -Section: debian-installer -Priority: extra -Provides: ntfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di -Description: NTFS filesystem support - This package contains the NTFS file system module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: xfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: xfs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: fat-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: fat-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: hfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: hfs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: hfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: HFS filesystem support This package contains the HFS and HFS+ filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: affs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: affs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: affs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Amiga filesystem support This package contains the Amiga filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 -Package-Type: udeb - -Package: minix-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel -Section: debian-installer -Priority: extra -Provides: minix-modules -Depends: kernel-image-4.9.0-2-loongson-3-di -Description: Minix filesystem support - This package contains the Minix filesystem module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 -Package-Type: udeb - -Package: nfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel -Section: debian-installer -Priority: extra -Provides: nfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di -Description: NFS filesystem support - This package contains the NFS filesystem module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: md-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: md-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: multipath-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: multipath-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, md-modules-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: usb-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: usb-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: usb-storage-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di, usb-modules-4.9.0-2-powerpc-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: fb-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: pcmcia-storage-modules-4.9.0-2-powerpc-di +Architecture: powerpc +Section: debian-installer +Priority: standard +Provides: pcmcia-storage-modules +Depends: kernel-image-4.9.0-2-powerpc-di, cdrom-core-modules-4.9.0-2-powerpc-di, pcmcia-modules-4.9.0-2-powerpc-di, ata-modules-4.9.0-2-powerpc-di +Description: PCMCIA storage drivers + This package contains PCMCIA storage drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc +Package-Type: udeb + +Package: fb-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: fb-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Frame buffer support This package contains Frame buffer drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: input-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: input-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, usb-modules-4.9.0-2-powerpc-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: event-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: event-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: mouse-modules-4.9.0-2-powerpc-di +Architecture: powerpc +Section: debian-installer +Priority: extra +Provides: mouse-modules +Depends: kernel-image-4.9.0-2-powerpc-di, event-modules-4.9.0-2-powerpc-di, input-modules-4.9.0-2-powerpc-di, usb-modules-4.9.0-2-powerpc-di +Description: Mouse support + This package contains mouse drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc +Package-Type: udeb + +Package: nic-pcmcia-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard -Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, nic-shared-modules-4.9.0-2-loongson-3-di, nic-wireless-modules-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di -Description: USB NIC drivers - This package contains USB network adapter drivers for the kernel. +Provides: nic-pcmcia-modules +Depends: kernel-image-4.9.0-2-powerpc-di, nic-modules-4.9.0-2-powerpc-di, nic-shared-modules-4.9.0-2-powerpc-di, pcmcia-modules-4.9.0-2-powerpc-di +Description: Common PCMCIA NIC drivers + This package contains common PCMCIA NIC drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: sata-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: pcmcia-modules-4.9.0-2-powerpc-di +Architecture: powerpc +Section: debian-installer +Priority: standard +Provides: pcmcia-modules +Depends: kernel-image-4.9.0-2-powerpc-di +Description: Common PCMCIA drivers + This package contains common PCMCIA drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc +Package-Type: udeb + +Package: sata-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di, ata-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di, ata-modules-4.9.0-2-powerpc-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: crc-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: crc-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: crypto-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: crypto-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: crypto-dm-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, md-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, md-modules-4.9.0-2-powerpc-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: ata-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: ata-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: ata-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di Description: ATA disk modules This package contains core ATA disk modules used by both PATA and SATA disk drivers. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: nbd-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: nbd-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: squashfs-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: squashfs-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 -Package-Type: udeb - -Package: speakup-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel -Section: debian-installer -Priority: extra -Provides: speakup-modules -Depends: kernel-image-4.9.0-2-loongson-3-di -Description: speakup modules - This package contains speakup modules. -Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: virtio-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: virtio-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, scsi-core-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, scsi-core-modules-4.9.0-2-powerpc-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: sound-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: uinput-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra -Provides: sound-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, usb-modules-4.9.0-2-loongson-3-di, firewire-core-modules-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di -Description: sound support - This package contains sound modules. +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-powerpc-di +Description: uinput support + This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: zlib-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: zlib-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: zlib-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: zlib modules This package contains zlib modules. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: udf-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: udf-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-loongson-3-di, crc-modules-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di, crc-modules-4.9.0-2-powerpc-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: fuse-modules-4.9.0-2-loongson-3-di -Architecture: mips64el mipsel +Package: fuse-modules-4.9.0-2-powerpc-di +Architecture: powerpc Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-loongson-3-di +Depends: kernel-image-4.9.0-2-powerpc-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-loongson-3 +Kernel-Version: 4.9.0-2-powerpc Package-Type: udeb -Package: linux-image-4.9.0-2-loongson-3 -Architecture: mips64el mipsel -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [mipsel mips64el] | linux-initramfs-tool [mipsel mips64el] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for Loongson 3A/3B - The Linux kernel 4.9 and modules for use on Loongson 3A or 3B based - systems (e.g. from Loongson or Lemote). -Build-Profiles: - -Package: linux-headers-4.9.0-2-loongson-3 -Architecture: mips64el mipsel -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 -Description: Header files for Linux 4.9.0-2-loongson-3 - This package provides the architecture-specific kernel header files for - Linux kernel 4.9.0-2-loongson-3, generally used for building out-of-tree - kernel modules. These files are going to be installed into - /usr/src/linux-headers-4.9.0-2-loongson-3, and can be used for building - modules that load into the kernel provided by the - linux-image-4.9.0-2-loongson-3 package. -Build-Profiles: - -Package: linux-image-4.9.0-2-loongson-3-dbgsym -Architecture: mips64el mipsel -Section: debug -Priority: extra -Depends: ${misc:Depends} -Description: Debug symbols for linux-image-4.9.0-2-loongson-3 -Build-Profiles: - -Package: linux-headers-4.9.0-2-all-mips64 -Architecture: mips64 -Depends: ${misc:Depends}, linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. -Build-Profiles: - -Package: kernel-image-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: kernel-image-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard -Provides: kernel-image, rtc-modules +Provides: kernel-image Description: Linux kernel image and core modules for the Debian installer This package contains the kernel image and core modules for the Debian installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: nic-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: nic-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, nic-shared-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: nic-wireless-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: standard -Provides: nic-wireless-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, mmc-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di -Description: Wireless NIC drivers - This package contains wireless NIC drivers for the kernel. Includes - crypto modules only needed for wireless (WEP, WPA). -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: nic-shared-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: serial-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 +Section: debian-installer +Priority: optional +Provides: serial-modules +Depends: kernel-image-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di +Description: Serial drivers + This package contains serial drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc64 +Package-Type: udeb + +Package: usb-serial-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: ppp-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: ppp-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, zlib-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, serial-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: pata-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: pata-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: pata-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di Description: PATA drivers This package contains PATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: cdrom-core-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, isofs-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, isofs-modules-4.9.0-2-powerpc64-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: firewire-core-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 +Section: debian-installer +Priority: standard +Provides: firewire-core-modules +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Description: Core FireWire drivers + This package contains core FireWire drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc64 +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: scsi-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: scsi-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, cdrom-core-modules-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, cdrom-core-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: loop-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: loop-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: btrfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: btrfs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di, zlib-modules-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: ext4-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: ext4-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: isofs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: isofs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: jfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: jfs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: ntfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: extra -Provides: ntfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: NTFS filesystem support - This package contains the NTFS file system module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: xfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: xfs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: fat-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: fat-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: hfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: hfs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: hfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: HFS filesystem support This package contains the HFS and HFS+ filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: affs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: extra -Provides: affs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: Amiga filesystem support - This package contains the Amiga filesystem module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: minix-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: affs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra -Provides: minix-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: Minix filesystem support - This package contains the Minix filesystem module for the kernel. +Provides: affs-modules +Depends: kernel-image-4.9.0-2-powerpc64-di +Description: Amiga filesystem support + This package contains the Amiga filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: md-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: md-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: multipath-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: multipath-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: usb-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: usb-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: usb-storage-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: input-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: pcmcia-storage-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 +Section: debian-installer +Priority: standard +Provides: pcmcia-storage-modules +Depends: kernel-image-4.9.0-2-powerpc64-di, cdrom-core-modules-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di +Description: PCMCIA storage drivers + This package contains PCMCIA storage drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc64 +Package-Type: udeb + +Package: input-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: event-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: event-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: mouse-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: mouse-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: mouse-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, event-modules-4.9.0-2-5kc-malta-di, input-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, event-modules-4.9.0-2-powerpc64-di, input-modules-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di Description: Mouse support This package contains mouse drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: nic-usb-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: nic-pcmcia-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard -Provides: nic-usb-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, nic-shared-modules-4.9.0-2-5kc-malta-di, nic-wireless-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di -Description: USB NIC drivers - This package contains USB network adapter drivers for the kernel. +Provides: nic-pcmcia-modules +Depends: kernel-image-4.9.0-2-powerpc64-di, nic-modules-4.9.0-2-powerpc64-di, nic-shared-modules-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di +Description: Common PCMCIA NIC drivers + This package contains common PCMCIA NIC drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: sata-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: pcmcia-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: standard -Provides: sata-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di, ata-modules-4.9.0-2-5kc-malta-di -Description: SATA drivers - This package contains SATA drivers for the kernel. +Provides: pcmcia-modules +Depends: kernel-image-4.9.0-2-powerpc64-di +Description: Common PCMCIA drivers + This package contains common PCMCIA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: i2c-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: sata-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer -Priority: extra -Provides: i2c-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: i2c support modules - This package contains basic i2c support modules. +Priority: standard +Provides: sata-modules +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di +Description: SATA drivers + This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: crc-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: crc-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: crypto-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: crypto-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: crypto-dm-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, md-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: ata-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: ata-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: ata-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di Description: ATA disk modules This package contains core ATA disk modules used by both PATA and SATA disk drivers. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: mmc-core-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: extra -Provides: mmc-core-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: MMC/SD/SDIO core modules - This package contains core modules for MMC/SD/SDIO support. -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: mmc-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: extra -Provides: mmc-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, mmc-core-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di -Description: MMC/SD card modules - This package contains modules needed to support MMC (multimedia) and SD - cards. -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: nbd-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: nbd-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: squashfs-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: squashfs-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: virtio-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: virtio-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, scsi-core-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta -Package-Type: udeb - -Package: sound-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el -Section: debian-installer -Priority: extra -Provides: sound-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, i2c-modules-4.9.0-2-5kc-malta-di, usb-modules-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di -Description: sound support - This package contains sound modules. -Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: zlib-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: uinput-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra -Provides: zlib-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di -Description: zlib modules - This package contains zlib modules. +Provides: uinput-modules +Depends: kernel-image-4.9.0-2-powerpc64-di +Description: uinput support + This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: udf-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: udf-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di, crc-modules-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: fuse-modules-4.9.0-2-5kc-malta-di -Architecture: mips64 mips64el +Package: fuse-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-5kc-malta-di +Depends: kernel-image-4.9.0-2-powerpc64-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-5kc-malta +Kernel-Version: 4.9.0-2-powerpc64 Package-Type: udeb -Package: linux-headers-4.9.0-2-all-mips64el -Architecture: mips64el -Depends: ${misc:Depends}, linux-headers-4.9.0-2-5kc-malta (= ${binary:Version}), linux-headers-4.9.0-2-loongson-3 (= ${binary:Version}), linux-headers-4.9.0-2-octeon (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. +Package: hypervisor-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 +Section: debian-installer +Priority: standard +Provides: hypervisor-modules +Depends: kernel-image-4.9.0-2-powerpc64-di +Description: IBM 64bit hypervisor console modules + Contains drivers for the hypervisor console, used as console for linux + running in logical partitions of IBM hardware supporting it. Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc64 +Package-Type: udeb -Package: linux-headers-4.9.0-2-all-powerpc -Architecture: powerpc -Depends: ${misc:Depends}, linux-headers-4.9.0-2-powerpc (= ${binary:Version}), linux-headers-4.9.0-2-powerpc-smp (= ${binary:Version}), linux-headers-4.9.0-2-powerpc64 (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. +Package: fancontrol-modules-4.9.0-2-powerpc64-di +Architecture: powerpc ppc64 +Section: debian-installer +Priority: standard +Provides: fancontrol-modules +Depends: kernel-image-4.9.0-2-powerpc64-di +Description: Apple powermac fancontrol modules + Contains drivers for macintosh i2c bus as well as for the monitoring + devices connected to it. This allows to control the fans during + installation. Build-Profiles: +Kernel-Version: 4.9.0-2-powerpc64 +Package-Type: udeb -Package: linux-image-4.9.0-2-powerpc-unsigned +Package: linux-image-4.9.0-2-powerpc Architecture: powerpc -Provides: linux-image-4.9.0-2-powerpc Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [powerpc] | linux-initramfs-tool [powerpc] Recommends: firmware-linux-free, ${kernel:Recommends} Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [powerpc] -Replaces: linux-image-4.9.0-2-powerpc Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-powerpc Description: Linux 4.9 for uniprocessor 32-bit PowerPC The Linux kernel 4.9 and modules for use on uniprocessor 32-bit PowerPC. Build-Profiles: Package: linux-headers-4.9.0-2-powerpc Architecture: powerpc -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-powerpc This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-powerpc, generally used for building out-of-tree @@ -5087,22 +8899,19 @@ Description: Debug symbols for linux-image-4.9.0-2-powerpc Build-Profiles: -Package: linux-image-4.9.0-2-powerpc-smp-unsigned +Package: linux-image-4.9.0-2-powerpc-smp Architecture: powerpc -Provides: linux-image-4.9.0-2-powerpc-smp Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [powerpc] | linux-initramfs-tool [powerpc] Recommends: firmware-linux-free, ${kernel:Recommends} Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [powerpc] -Replaces: linux-image-4.9.0-2-powerpc-smp Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-powerpc-smp Description: Linux 4.9 for multiprocessor 32-bit PowerPC The Linux kernel 4.9 and modules for use on multiprocessor 32-bit PowerPC. Build-Profiles: Package: linux-headers-4.9.0-2-powerpc-smp Architecture: powerpc -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-powerpc-smp This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-powerpc-smp, generally used for building out-of-tree @@ -5120,22 +8929,19 @@ Description: Debug symbols for linux-image-4.9.0-2-powerpc-smp Build-Profiles: -Package: linux-image-4.9.0-2-powerpc64-unsigned -Architecture: powerpc -Provides: linux-image-4.9.0-2-powerpc64 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [powerpc] | linux-initramfs-tool [powerpc] +Package: linux-image-4.9.0-2-powerpc64 +Architecture: powerpc ppc64 +Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [powerpc ppc64] | linux-initramfs-tool [powerpc ppc64] Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [powerpc] -Replaces: linux-image-4.9.0-2-powerpc64 +Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [powerpc ppc64] Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-powerpc64 Description: Linux 4.9 for 64-bit PowerPC The Linux kernel 4.9 and modules for use on 64-bit PowerPC. Build-Profiles: Package: linux-headers-4.9.0-2-powerpc64 Architecture: powerpc ppc64 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-powerpc64 This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-powerpc64, generally used for building out-of-tree @@ -5175,7 +8981,7 @@ Package: linux-headers-4.9.0-2-powerpcspe Architecture: powerpcspe -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-powerpcspe This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-powerpcspe, generally used for building out-of-tree @@ -5202,8 +9008,17 @@ kernel modules. Build-Profiles: -Package: kernel-image-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: linux-headers-4.9.0-2-all-ppc64el +Architecture: ppc64el +Depends: ${misc:Depends}, linux-headers-4.9.0-2-powerpc64le (= ${binary:Version}) +Description: All header files for Linux 4.9 (meta-package) + This package depends against all architecture-specific kernel header files + for Linux kernel version 4.9, generally used for building out-of-tree + kernel modules. +Build-Profiles: + +Package: kernel-image-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: kernel-image @@ -5212,556 +9027,462 @@ installer boot images. It does _not_ provide a usable kernel for your full Debian system. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: nic-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: nic-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: nic-modules, nic-extra-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, nic-shared-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, nic-shared-modules-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: NIC drivers This package contains Ethernet and some paravirtualised network drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: nic-shared-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: nic-shared-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: nic-shared-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Shared NIC drivers This package contains NIC drivers needed by combinations of nic-modules, nic-pcmcia-modules, nic-usb-modules and nic-wireless-modules. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: serial-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: serial-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: optional Provides: serial-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Serial drivers This package contains serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: usb-serial-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: usb-serial-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: optional Provides: usb-serial-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, usb-modules-4.9.0-2-powerpc64le-di Description: USB serial drivers This package contains USB serial drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: ppp-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: ppp-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: optional Provides: ppp-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, serial-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, serial-modules-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: PPP drivers This package contains PPP drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: pata-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: standard -Provides: pata-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di -Description: PATA drivers - This package contains PATA drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: cdrom-core-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: cdrom-core-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: cdrom-core-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, isofs-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di, isofs-modules-4.9.0-2-powerpc64le-di Description: CDROM support This package contains core CDROM support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: firewire-core-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: firewire-core-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: firewire-core-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: Core FireWire drivers This package contains core FireWire drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: scsi-core-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: scsi-core-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: scsi-core-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Core SCSI subsystem This package contains the core SCSI subsystem for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: scsi-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: scsi-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: scsi-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, cdrom-core-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di, cdrom-core-modules-4.9.0-2-powerpc64le-di, ata-modules-4.9.0-2-powerpc64le-di Description: SCSI drivers This package contains SCSI drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: loop-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: loop-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: loop-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Loopback filesystem support This package contains loopback filesystem support for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: btrfs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: btrfs-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: btrfs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di, md-modules-4.9.0-2-powerpc64le-di Description: BTRFS filesystem support This package contains the BTRFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: ext4-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: ext4-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: ext4-modules, ext2-modules, ext3-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: ext2/ext3/ext4 filesystem support This package contains the ext4 filesystem module for the kernel, which also supports ext2 and ext3. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: isofs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: isofs-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: isofs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: ISOFS filesystem support This package contains the ISOFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: jfs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: jfs-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: jfs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: JFS filesystem support This package contains the JFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: xfs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: xfs-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: xfs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: XFS filesystem support This package contains the XFS filesystem module for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: fat-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: fat-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: fat-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: hfs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: extra -Provides: hfs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di -Description: HFS filesystem support - This package contains the HFS and HFS+ filesystem modules for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: affs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: extra -Provides: affs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di -Description: Amiga filesystem support - This package contains the Amiga filesystem module for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: md-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: md-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: md-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: RAID and LVM support This package contains RAID and LVM modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: multipath-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: multipath-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: multipath-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, md-modules-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di Description: Multipath support This package contains DM-Multipath modules for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: usb-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: usb-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: usb-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: USB support This package contains core USB drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: usb-storage-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: usb-storage-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: usb-storage-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di, usb-modules-4.9.0-2-powerpc64le-di Description: USB storage support This package contains the USB storage driver for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: pcmcia-storage-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: standard -Provides: pcmcia-storage-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, cdrom-core-modules-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di -Description: PCMCIA storage drivers - This package contains PCMCIA storage drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: input-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: input-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: input-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, usb-modules-4.9.0-2-powerpc64le-di Description: Input devices support This package contains input device drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: event-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: event-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: event-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Event support This package contains event drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: mouse-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: mouse-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: mouse-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, event-modules-4.9.0-2-powerpc64-di, input-modules-4.9.0-2-powerpc64-di, usb-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, event-modules-4.9.0-2-powerpc64le-di, input-modules-4.9.0-2-powerpc64le-di, usb-modules-4.9.0-2-powerpc64le-di Description: Mouse support This package contains mouse drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: nic-pcmcia-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: standard -Provides: nic-pcmcia-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, nic-modules-4.9.0-2-powerpc64-di, nic-shared-modules-4.9.0-2-powerpc64-di, pcmcia-modules-4.9.0-2-powerpc64-di -Description: Common PCMCIA NIC drivers - This package contains common PCMCIA NIC drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 -Package-Type: udeb - -Package: pcmcia-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 -Section: debian-installer -Priority: standard -Provides: pcmcia-modules -Depends: kernel-image-4.9.0-2-powerpc64-di -Description: Common PCMCIA drivers - This package contains common PCMCIA drivers for the kernel. -Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: sata-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: sata-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: sata-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di, ata-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di, ata-modules-4.9.0-2-powerpc64le-di Description: SATA drivers This package contains SATA drivers for the kernel. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: crc-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: crc-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: crc-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: CRC modules This package contains CRC support modules. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: crypto-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: crypto-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: crypto-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: crypto modules This package contains crypto modules. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: crypto-dm-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: crypto-dm-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: crypto-dm-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, md-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, md-modules-4.9.0-2-powerpc64le-di Description: devicemapper crypto module This package contains the devicemapper crypto (dm-crypt) module. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: ata-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: ata-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: ata-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di Description: ATA disk modules This package contains core ATA disk modules used by both PATA and SATA disk drivers. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: nbd-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: nbd-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: nbd-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Network Block Device modules This package contains the modules required for support of the Network Block Device Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: squashfs-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: squashfs-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: squashfs-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: squashfs modules This package contains squashfs modules. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: virtio-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: virtio-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: virtio-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, scsi-core-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, scsi-core-modules-4.9.0-2-powerpc64le-di Description: virtio modules This package contains virtio modules. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: uinput-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: uinput-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: uinput-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: uinput support This package contains the uinput module. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: udf-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: udf-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: udf-modules -Depends: kernel-image-4.9.0-2-powerpc64-di, crc-modules-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di, crc-modules-4.9.0-2-powerpc64le-di Description: UDF modules This package contains the UDF filesystem module. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: fuse-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: fuse-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: extra Provides: fuse-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: FUSE modules This package contains the Filesystem in Userspace (FUSE) module. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: hypervisor-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: hypervisor-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: hypervisor-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: IBM 64bit hypervisor console modules Contains drivers for the hypervisor console, used as console for linux running in logical partitions of IBM hardware supporting it. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: fancontrol-modules-4.9.0-2-powerpc64-di -Architecture: ppc64 +Package: fancontrol-modules-4.9.0-2-powerpc64le-di +Architecture: ppc64el Section: debian-installer Priority: standard Provides: fancontrol-modules -Depends: kernel-image-4.9.0-2-powerpc64-di +Depends: kernel-image-4.9.0-2-powerpc64le-di Description: Apple powermac fancontrol modules Contains drivers for macintosh i2c bus as well as for the monitoring devices connected to it. This allows to control the fans during installation. Build-Profiles: -Kernel-Version: 4.9.0-2-powerpc64 +Kernel-Version: 4.9.0-2-powerpc64le Package-Type: udeb -Package: linux-image-4.9.0-2-powerpc64 -Architecture: ppc64 -Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [ppc64] | linux-initramfs-tool [ppc64] -Recommends: firmware-linux-free, ${kernel:Recommends} -Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [ppc64] -Breaks: initramfs-tools (<< 0.120+deb8u2) -Description: Linux 4.9 for 64-bit PowerPC - The Linux kernel 4.9 and modules for use on 64-bit PowerPC. -Build-Profiles: - -Package: linux-headers-4.9.0-2-all-ppc64el -Architecture: ppc64el -Depends: ${misc:Depends}, linux-headers-4.9.0-2-powerpc64le (= ${binary:Version}) -Description: All header files for Linux 4.9 (meta-package) - This package depends against all architecture-specific kernel header files - for Linux kernel version 4.9, generally used for building out-of-tree - kernel modules. -Build-Profiles: - -Package: linux-image-4.9.0-2-powerpc64le-unsigned +Package: linux-image-4.9.0-2-powerpc64le Architecture: ppc64el -Provides: linux-image-4.9.0-2-powerpc64le Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [ppc64el] | linux-initramfs-tool [ppc64el] Recommends: firmware-linux-free, ${kernel:Recommends} Suggests: linux-doc-4.9, debian-kernel-handbook, mkvmlinuz [ppc64el] -Replaces: linux-image-4.9.0-2-powerpc64le Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-powerpc64le Description: Linux 4.9 for Little-endian 64-bit PowerPC The Linux kernel 4.9 and modules for use on Little-endian 64-bit PowerPC. Build-Profiles: Package: linux-headers-4.9.0-2-powerpc64le Architecture: ppc64el -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-powerpc64le This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-powerpc64le, generally used for building out-of-tree @@ -5788,22 +9509,289 @@ kernel modules. Build-Profiles: -Package: linux-image-4.9.0-2-s390x-unsigned +Package: kernel-image-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: kernel-image +Description: Linux kernel image and core modules for the Debian installer + This package contains the kernel image and core modules for the Debian + installer boot images. It does _not_ provide a usable kernel for your + full Debian system. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: nic-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: nic-modules, nic-extra-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di +Description: NIC drivers + This package contains Ethernet and some paravirtualised network drivers + for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: scsi-core-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: scsi-core-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: Core SCSI subsystem + This package contains the core SCSI subsystem for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: scsi-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: scsi-modules +Depends: kernel-image-4.9.0-2-s390x-di, scsi-core-modules-4.9.0-2-s390x-di +Description: SCSI drivers + This package contains SCSI drivers for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: loop-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: loop-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: Loopback filesystem support + This package contains loopback filesystem support for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: btrfs-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: btrfs-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di, zlib-modules-4.9.0-2-s390x-di, md-modules-4.9.0-2-s390x-di +Description: BTRFS filesystem support + This package contains the BTRFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: ext4-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: ext4-modules, ext2-modules, ext3-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di +Description: ext2/ext3/ext4 filesystem support + This package contains the ext4 filesystem module for the kernel, which + also supports ext2 and ext3. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: isofs-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: isofs-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: ISOFS filesystem support + This package contains the ISOFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: xfs-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: xfs-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di +Description: XFS filesystem support + This package contains the XFS filesystem module for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: fat-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: fat-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: FAT filesystem support + This package contains the FAT and VFAT filesystem modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: md-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: md-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di +Description: RAID and LVM support + This package contains RAID and LVM modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: multipath-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: multipath-modules +Depends: kernel-image-4.9.0-2-s390x-di, md-modules-4.9.0-2-s390x-di, scsi-core-modules-4.9.0-2-s390x-di +Description: Multipath support + This package contains DM-Multipath modules for the kernel. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: crc-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: crc-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: CRC modules + This package contains CRC support modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: crypto-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: crypto-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: crypto modules + This package contains crypto modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: crypto-dm-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: crypto-dm-modules +Depends: kernel-image-4.9.0-2-s390x-di, md-modules-4.9.0-2-s390x-di +Description: devicemapper crypto module + This package contains the devicemapper crypto (dm-crypt) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: nbd-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: nbd-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: Network Block Device modules + This package contains the modules required for support of the Network + Block Device +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: virtio-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: virtio-modules +Depends: kernel-image-4.9.0-2-s390x-di, scsi-core-modules-4.9.0-2-s390x-di +Description: virtio modules + This package contains virtio modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: zlib-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: zlib-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: zlib modules + This package contains zlib modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: udf-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: udf-modules +Depends: kernel-image-4.9.0-2-s390x-di, crc-modules-4.9.0-2-s390x-di +Description: UDF modules + This package contains the UDF filesystem module. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: fuse-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: fuse-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: FUSE modules + This package contains the Filesystem in Userspace (FUSE) module. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: dasd-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: standard +Provides: dasd-modules +Depends: kernel-image-4.9.0-2-s390x-di +Description: dasd modules + This package contains dasd modules. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: dasd-extra-modules-4.9.0-2-s390x-di +Architecture: s390x +Section: debian-installer +Priority: extra +Provides: dasd-extra-modules +Depends: kernel-image-4.9.0-2-s390x-di, dasd-modules-4.9.0-2-s390x-di +Description: optional dasd DIAG support + This package contains the module for dasd DIAG support. The udeb is not + loaded by default as the installer does not actually support this. It can + however be useful to have available in rescue situations. +Build-Profiles: +Kernel-Version: 4.9.0-2-s390x +Package-Type: udeb + +Package: linux-image-4.9.0-2-s390x Architecture: s390x -Provides: linux-image-4.9.0-2-s390x Depends: kmod, linux-base (>= 4.3~), ${misc:Depends}, initramfs-tools (>= 0.120+deb8u2) [s390x] | linux-initramfs-tool [s390x] Recommends: firmware-linux-free, ${kernel:Recommends} Suggests: linux-doc-4.9, debian-kernel-handbook, s390-tools [s390x] -Replaces: linux-image-4.9.0-2-s390x Breaks: initramfs-tools (<< 0.120+deb8u2) -Conflicts: linux-image-4.9.0-2-s390x Description: Linux 4.9 for IBM zSeries The Linux kernel 4.9 and modules for use on IBM zSeries. Build-Profiles: Package: linux-headers-4.9.0-2-s390x Architecture: s390x -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, linux-compiler-gcc-6-s390 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-s390x This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-s390x, generally used for building out-of-tree kernel @@ -6583,7 +10571,7 @@ Package: linux-headers-4.9.0-2-sh7751r Architecture: sh4 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-sh7751r This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-sh7751r, generally used for building out-of-tree @@ -6614,7 +10602,7 @@ Package: linux-headers-4.9.0-2-sh7785lcr Architecture: sh4 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-sh7785lcr This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-sh7785lcr, generally used for building out-of-tree @@ -7011,7 +10999,7 @@ Package: linux-headers-4.9.0-2-sparc64 Architecture: sparc64 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-sparc64 This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-sparc64, generally used for building out-of-tree @@ -7042,7 +11030,7 @@ Package: linux-headers-4.9.0-2-sparc64-smp Architecture: sparc64 -Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-6 +Depends: linux-headers-4.9.0-2-common (= ${binary:Version}), linux-kbuild-4.9, ${misc:Depends}, gcc-4.9 Description: Header files for Linux 4.9.0-2-sparc64-smp This package provides the architecture-specific kernel header files for Linux kernel 4.9.0-2-sparc64-smp, generally used for building out-of-tree diff -Nru linux-4.9.13/debian/control.md5sum linux-4.9-4.9.13/debian/control.md5sum --- linux-4.9.13/debian/control.md5sum 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/control.md5sum 2017-03-12 01:46:12.000000000 +0000 @@ -1,7 +1,8 @@ ac2a35d9d932aa7c28663b354a8f8397 debian/bin/gencontrol.py -9905e9a1ec7b610a9244dfcbe5171962 debian/changelog +2e8ad1b14355f5c1532e8bc85c89cd7c debian/changelog e492c730e8bc71cc52aa5315391e587e debian/templates/control.main.in -38004750aa03cea41d5d3aeafff16fcc debian/templates/image.preinst.in +51797b6c275eb14e99009e78553904cc debian/templates/lintian-overrides.perf.in +a0307842c8c97bd549f3dba7b53a709f debian/templates/image.preinst.in afb508873a44a1f196c2a525fec4b415 debian/templates/image.prerm.in 0d7f6ea42f52d0a6013535a80111ee3e debian/templates/headers.postinst.in 56f7b7e91f52c76cc7477f18d7351318 debian/templates/control.tools.in @@ -9,47 +10,46 @@ a4a60fc48b3240e46bbac6a1ddcaad30 debian/templates/image.postrm.in 8ff553ff7232b003c35bdd074913bc8a debian/templates/control.image-unsigned.in aaefe1e8777c46e773f8cc2515eb8d7c debian/templates/control.image-dbg.in -f73118b69c24c8014381c1bc65fc5b86 debian/templates/control.source.in -51797b6c275eb14e99009e78553904cc debian/templates/lintian-overrides.perf.in +8814034f0462426628828b98082a473c debian/templates/control.source.in 63c0d01ea032d0acfa5e069d31daa938 debian/templates/control.libc-dev.in 6bf8fd71accd1530c46f3d6887d1ad4c debian/templates/image-dbg.lintian-override.in 46cc93799a6214c79efea8084bc9a329 debian/templates/control.headers.featureset.in 814dda166c7e3ef02e6e259e805ac66a debian/templates/tests-control.main.in -0327750d6696dee915a532aec73a0fd6 debian/templates/image.postinst.in +2a104c9a15916e3d39d3ae5cca916bff debian/templates/image.postinst.in 5fcd1fcb86826db36e024047512340c4 debian/templates/control.headers.in c6cea196527a033d3d3bed7c8bc141f4 debian/templates/control.extra.in fc3e8629682e63a1858b15d7f3df0ef9 debian/templates/control.docs.in 5f1df5cd150d7663b81f5c54a604a766 debian/templates/control.headers.arch.in -fdb5f27b992238d4308b1945daf8a4b3 debian/config/defines +125e05686eb89b180f8e204300260e21 debian/config/defines c0f55b1ebb6d0e78559f5bb2a60268c2 debian/config/i386/defines 6f7d102847d8168a3c71c044ea7127ac debian/config/tilegx/defines 6efeb6f3f8ad4ecef3fff0d012fabad0 debian/config/mips64el/defines 8f2e4969633ff660d026f2b7e02e6336 debian/config/sh3/defines ff1f9b857ee6f0c977d2f8541211a9f5 debian/config/mipsr6/defines -94ba8bbdb7fe938d1fc6c632eeef04aa debian/config/armhf/defines +e012c3d3182e4d3cab2434793f8ebbe0 debian/config/armhf/defines c9cb44fd9a332a58b1278f9afd69f674 debian/config/amd64/defines +4987bf8df1bf042f19fdec4da87aa1d4 debian/config/ppc64el/defines f74b224857e0111bf2e14b124b3e2be2 debian/config/mipsr6el/defines 12c5f99fafdfd2d3696623ba86b2cc46 debian/config/mips/defines 3d514fbbc086aae2b520554dd995a705 debian/config/arm64/defines e411d2dfe0018a7c40b6bf7efd45cd29 debian/config/mipsn32/defines +92c952083bf0523c5cdffe9f2e7dd300 debian/config/powerpcspe/defines 174058e52aced932bf02606d6cb5649c debian/config/mipsn32el/defines 366b94d652a66b437eabcd165bcc9610 debian/config/featureset-rt/defines 8d317c1872f3bd8da4feae25a7c61df3 debian/config/sparc/defines -e9ffe255afcab8138ebf4106c3707e44 debian/config/powerpc/defines +95afd8c730829f00f334595dd678639b debian/config/s390x/defines 91a544ce36cc1717eee3e07211633e2c debian/config/ppc64/defines f4b2921156e7b1a038862f848fdfe48f debian/config/x32/defines c8677acd57ee1da9d592d7e1ce7ac3d7 debian/config/mips64/defines 788bca75e2379d4c6a5f937db95cf8dc debian/config/sparc64/defines e893f7044a89425752b95b8c997938e9 debian/config/mipsel/defines 2d093d5d5d6dd1e2b27d717678cb9ece debian/config/sh4/defines -0162bb2f03eb0a881253e9abe9df16a3 debian/config/hppa/defines -92c952083bf0523c5cdffe9f2e7dd300 debian/config/powerpcspe/defines 2776c7338272b480295da18b47b08a7d debian/config/m68k/defines -95afd8c730829f00f334595dd678639b debian/config/s390x/defines 882fb0fec3cbd0239817994223fa71e5 debian/config/mipsn32r6/defines 4069594eeb2a1856c6806812055249b2 debian/config/alpha/defines 73e2f095b2485f95bc164bf685684a47 debian/config/mipsn32r6el/defines -4987bf8df1bf042f19fdec4da87aa1d4 debian/config/ppc64el/defines +0162bb2f03eb0a881253e9abe9df16a3 debian/config/hppa/defines +e9ffe255afcab8138ebf4106c3707e44 debian/config/powerpc/defines 7dea833991a13b2df067bd6941ee96a1 debian/config/armel/defines 98673c303524a87722b25c9e6b8cdd81 debian/config/mips64r6/defines 8f8f7ed35c8dafdc5c6d4ded40bf5920 debian/config/mips64r6el/defines @@ -63,21 +63,21 @@ a38b614c64d74861e6c844adfd7fc935 debian/installer/ppc64el/kernel-versions 8b2032899d26c7029402cc5f3a68280d debian/installer/mips64el/kernel-versions 2c18144b7fbfd950ec1a305728e1e003 debian/installer/mipsr6/kernel-versions -3217c84b23f44f3fecb41d132f310ade debian/installer/armhf/kernel-versions +9c2a49d38f971b74f400f28ec1ff98ec debian/installer/armhf/kernel-versions 7ecaa8334419297fe6715afadae794c6 debian/installer/amd64/kernel-versions b2f2f5b2d18a383b6b5e1961fbf8aeb1 debian/installer/mipsr6el/kernel-versions 00a8913a1998e0a7083495be7a9622f7 debian/installer/mips/kernel-versions cc12b5c69d0930a4400e9ec072d9f915 debian/installer/arm64/kernel-versions -42aaaa53f3ecb95030e1a33654db6f8e debian/installer/powerpc/kernel-versions +f8348b90fe2b9e1e75bddda4dbb832c4 debian/installer/s390x/kernel-versions 0cb3424304d9602f321919da020eef8c debian/installer/ppc64/kernel-versions 18d013f76c11803b03d2ea610cc201c9 debian/installer/mips64/kernel-versions 61a070b81f93d4c9e955dc90587702f3 debian/installer/sparc64/kernel-versions 0e06b9acdcb4cd8dc06985dd49bdde05 debian/installer/mipsel/kernel-versions 49f36561dee0396410815d4e92beb01e debian/installer/sh4/kernel-versions 8aba4204e5bc4edcfd9790294b8808ec debian/installer/m68k/kernel-versions -f8348b90fe2b9e1e75bddda4dbb832c4 debian/installer/s390x/kernel-versions 1306c7e5b695c185d3193774b566e9e8 debian/installer/alpha/kernel-versions 8512485f3a856fe5225fa9c74ea32d5a debian/installer/hppa/kernel-versions +42aaaa53f3ecb95030e1a33654db6f8e debian/installer/powerpc/kernel-versions de8f39f8b1f1f8a34db1ca2920796b0d debian/installer/armel/kernel-versions bb7aa9ad2c62b074f1c2258a02c5d76c debian/installer/mips64r6/kernel-versions 35e1ed0ef705c3d60069ac8f13af000d debian/installer/mips64r6el/kernel-versions @@ -90,16 +90,16 @@ 0fc827f651bf58416e4e2231b01f6908 debian/installer/mipsr6el/package-list 0fc827f651bf58416e4e2231b01f6908 debian/installer/mips/package-list 9e2b11d9b288c0400e77b23245fd0ef0 debian/installer/arm64/package-list -8b7d23c8cd92a63434be9319b47d23e9 debian/installer/powerpc/package-list +4c1bf26b971d89864682040568fa388e debian/installer/s390x/package-list 8b7d23c8cd92a63434be9319b47d23e9 debian/installer/ppc64/package-list 0fc827f651bf58416e4e2231b01f6908 debian/installer/mips64/package-list b9df39e550a637012ccd5b1ddaa4b74a debian/installer/sparc64/package-list 2bfc44ae55c0c1d5676946c71d1f07f4 debian/installer/mipsel/package-list 829a090aa9cb3a272daf6b77006c6519 debian/installer/sh4/package-list d243c37c6930b5d5f646e8b55b317376 debian/installer/m68k/package-list -4c1bf26b971d89864682040568fa388e debian/installer/s390x/package-list 7f3b9396be74d9a40cfb6db48847a5dc debian/installer/alpha/package-list 42f64d483c9033b8af2bf2761a4a62fc debian/installer/hppa/package-list +8b7d23c8cd92a63434be9319b47d23e9 debian/installer/powerpc/package-list 2cbb54dee5b4512d847c67b20bb35caa debian/installer/armel/package-list 0fc827f651bf58416e4e2231b01f6908 debian/installer/mips64r6/package-list 0fc827f651bf58416e4e2231b01f6908 debian/installer/mips64r6el/package-list diff -Nru linux-4.9.13/debian/dummy.patch linux-4.9-4.9.13/debian/dummy.patch --- linux-4.9.13/debian/dummy.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/dummy.patch 2017-03-12 01:46:12.000000000 +0000 @@ -0,0 +1,5 @@ +diff -urN test1/999-dummy.txt test2/999-dummy.txt +--- test1/999-dummy.txt 1970-01-01 00:00:00.000000000 +0000 ++++ test2/999-dummy.txt 2013-07-20 14:46:08.000000000 +0000 +@@ -0,0 +1 @@ ++This is a dummy file to make sure rpi_999_other_changes.patch is not empty as empty patches confuse quilt. diff -Nru linux-4.9.13/debian/installer/armhf/kernel-versions linux-4.9-4.9.13/debian/installer/armhf/kernel-versions --- linux-4.9.13/debian/installer/armhf/kernel-versions 2016-07-31 00:32:15.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/kernel-versions 2017-03-12 01:46:13.000000000 +0000 @@ -1,2 +1,3 @@ # arch version flavour installedname suffix build-depends -armhf - armmp - - - +armhf - rpi - - - +armhf - rpi2 - - - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/btrfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/btrfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/btrfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/btrfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crc-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crc-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crc-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crc-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-dm-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/crypto-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext2-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext2-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext2-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext2-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext3-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext3-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext3-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/ext3-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/fuse-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/fuse-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/fuse-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/fuse-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/input-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/input-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/input-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/input-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,4 @@ +#include +usbhid - +usbmouse - +usbkbd - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/isofs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/isofs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/isofs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/isofs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/jfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/jfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/jfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/jfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/kernel-image linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/kernel-image --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/kernel-image 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/kernel-image 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +# empty diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/loop-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/loop-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/loop-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/loop-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/md-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/md-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/md-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/md-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/minix-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/minix-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/minix-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/minix-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/multipath-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/multipath-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/multipath-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/multipath-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/nbd-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/nbd-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/nbd-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/nbd-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/nic-usb-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/scsi-core-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,3 @@ +#include +scsi_mod - +sd_mod - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/squashfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/squashfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/squashfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/squashfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/udf-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/udf-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/udf-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/udf-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/uinput-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/uinput-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/uinput-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/uinput-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi/usb-storage-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,2 @@ +#include +usb-storage - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/btrfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/btrfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/btrfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/btrfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crc-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crc-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crc-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crc-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-dm-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-dm-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-dm-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-dm-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/crypto-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext2-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext2-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext2-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext2-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext3-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext3-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext3-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/ext3-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/fuse-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/fuse-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/fuse-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/fuse-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/input-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/input-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/input-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/input-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,4 @@ +#include +usbhid - +usbmouse - +usbkbd - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/isofs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/isofs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/isofs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/isofs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/jfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/jfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/jfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/jfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/kernel-image linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/kernel-image --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/kernel-image 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/kernel-image 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +# empty diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/loop-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/loop-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/loop-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/loop-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/md-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/md-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/md-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/md-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/minix-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/minix-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/minix-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/minix-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/multipath-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/multipath-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/multipath-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/multipath-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nbd-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nbd-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nbd-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nbd-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nic-usb-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nic-usb-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nic-usb-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/nic-usb-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/scsi-core-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/scsi-core-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/scsi-core-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/scsi-core-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,3 @@ +#include +scsi_mod - +sd_mod - diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/squashfs-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/squashfs-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/squashfs-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/squashfs-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/udf-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/udf-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/udf-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/udf-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/uinput-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/uinput-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/uinput-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/uinput-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1 @@ +#include diff -Nru linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/usb-storage-modules linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/usb-storage-modules --- linux-4.9.13/debian/installer/armhf/modules/armhf-rpi2/usb-storage-modules 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/installer/armhf/modules/armhf-rpi2/usb-storage-modules 2017-03-12 01:46:13.000000000 +0000 @@ -0,0 +1,2 @@ +#include +usb-storage - diff -Nru linux-4.9.13/debian/linux-headers-4.9.0-2-rpi2.postinst linux-4.9-4.9.13/debian/linux-headers-4.9.0-2-rpi2.postinst --- linux-4.9.13/debian/linux-headers-4.9.0-2-rpi2.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-headers-4.9.0-2-rpi2.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,18 @@ +#!/usr/bin/perl +# Author: Michael Gilbert +# Origin: Stripped down version of the linux-headers postinst from Ubuntu's +# 2.6.32-14-generic kernel, which was itself derived from a +# Debian linux-image postinst script. + +$|=1; +my $version = "4.9.0-2-rpi2"; + +if (-d "/etc/kernel/header_postinst.d") { + system ("run-parts --report --exit-on-error --arg=$version " . + "/etc/kernel/header_postinst.d") && + die "Failed to process /etc/kernel/header_postinst.d"; +} + +exit 0; + +__END__ diff -Nru linux-4.9.13/debian/linux-headers-4.9.0-2-rpi.postinst linux-4.9-4.9.13/debian/linux-headers-4.9.0-2-rpi.postinst --- linux-4.9.13/debian/linux-headers-4.9.0-2-rpi.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-headers-4.9.0-2-rpi.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,18 @@ +#!/usr/bin/perl +# Author: Michael Gilbert +# Origin: Stripped down version of the linux-headers postinst from Ubuntu's +# 2.6.32-14-generic kernel, which was itself derived from a +# Debian linux-image postinst script. + +$|=1; +my $version = "4.9.0-2-rpi"; + +if (-d "/etc/kernel/header_postinst.d") { + system ("run-parts --report --exit-on-error --arg=$version " . + "/etc/kernel/header_postinst.d") && + die "Failed to process /etc/kernel/header_postinst.d"; +} + +exit 0; + +__END__ diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-4kc-malta image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-4kc-malta.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-4kc-malta image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-5kc-malta image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-5kc-malta.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-5kc-malta image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-686-pae +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-686-pae +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-686-pae +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-686-pae +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-686-pae image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-pae-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-686-pae image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-686 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-686.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-686 +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-686 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-686.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-686 +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-686 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-686-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-686 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-alpha-generic image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-generic.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-alpha-generic image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-alpha-smp image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-alpha-smp.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-alpha-smp image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-amd64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-amd64 +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-amd64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-amd64 +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-amd64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-amd64-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-amd64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-arm64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-arm64 +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-arm64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-arm64 +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-arm64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-arm64-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-arm64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-loongson-3.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-loongson-3.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-loongson-3.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-loongson-3.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-loongson-3 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-loongson-3.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-loongson-3.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-loongson-3.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-loongson-3.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-loongson-3 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-m68k.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-m68k.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-m68k.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-m68k.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-m68k image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-m68k.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-m68k.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-m68k.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-m68k.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-m68k image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-marvell.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-marvell.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-marvell.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-marvell.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-marvell image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-marvell.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-marvell.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-marvell.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-marvell.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-marvell image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-octeon.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-octeon.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-octeon.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-octeon.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-octeon image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-octeon.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-octeon.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-octeon.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-octeon.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-octeon image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-parisc64-smp image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc64-smp.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-parisc64-smp image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-parisc.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-parisc.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-parisc image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-parisc.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-parisc.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-parisc.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-parisc image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc64le +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc64le +image_path=/boot/vmlinux-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc64le +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc64le +image_path=/boot/vmlinux-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpc64le image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64le-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpc64le image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpc64 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpc64 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpc64 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc64-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpc64 image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc +image_path=/boot/vmlinux-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc +image_path=/boot/vmlinux-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc-smp +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc-smp +image_path=/boot/vmlinux-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc-smp +image_path=/boot/vmlinux-$version +kimage=vmlinux + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-powerpc-smp +image_path=/boot/vmlinux-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpc-smp image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-smp-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpc-smp image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpcspe image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpcspe.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpcspe image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-powerpc image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-powerpc-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-powerpc image_path=/boot/vmlinux-$version +kimage=vmlinux if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi2-dbgsym.lintian-overrides linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2-dbgsym.lintian-overrides --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi2-dbgsym.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2-dbgsym.lintian-overrides 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,2 @@ +# Kernel dbg packages contain a full image with debug data +linux-image-4.9.0-2-rpi2-dbgsym: dbg-package-missing-depends diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi2 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi2 +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi2 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi2.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi2.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi2 +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi-dbgsym.lintian-overrides linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi-dbgsym.lintian-overrides --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi-dbgsym.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi-dbgsym.lintian-overrides 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,2 @@ +# Kernel dbg packages contain a full image with debug data +linux-image-4.9.0-2-rpi-dbgsym: dbg-package-missing-depends diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rpi.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-rpi.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rpi.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-rpi +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-686-pae +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-686-pae +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-686-pae +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-686-pae +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-rt-686-pae image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-686-pae-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-rt-686-pae image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-amd64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-amd64 +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-amd64 +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-rt-amd64 +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-rt-amd64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-rt-amd64-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-rt-amd64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x.postinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,30 @@ +#!/bin/sh -e + +version=4.9.0-2-s390x +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" != configure ]; then + exit 0 +fi + +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + +depmod $version + +if [ -f /lib/modules/$version/.fresh-install ]; then + change=install +else + change=upgrade +fi +linux-update-symlinks $change $version $image_path +rm -f /lib/modules/$version/.fresh-install + +if [ -d /etc/kernel/postinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postinst.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x.postrm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.postrm --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x.postrm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.postrm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,31 @@ +#!/bin/sh -e + +version=4.9.0-2-s390x +image_path=/boot/vmlinuz-$version + +rm -f /lib/modules/$version/.fresh-install + +if [ "$1" != upgrade ] && command -v linux-update-symlinks >/dev/null; then + linux-update-symlinks remove $version $image_path +fi + +if [ -d /etc/kernel/postrm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/postrm.d +fi + +if [ "$1" = purge ]; then + for extra_file in modules.dep modules.isapnpmap modules.pcimap \ + modules.usbmap modules.parportmap \ + modules.generic_string modules.ieee1394map \ + modules.ieee1394map modules.pnpbiosmap \ + modules.alias modules.ccwmap modules.inputmap \ + modules.symbols modules.ofmap \ + modules.seriomap modules.\*.bin \ + modules.softdep modules.devname; do + eval rm -f /lib/modules/$version/$extra_file + done + rmdir /lib/modules/$version || true +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x.preinst 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,28 @@ +#!/bin/sh -e + +version=4.9.0-2-s390x +image_path=/boot/vmlinuz-$version +kimage=vmlinuz + +if [ "$1" = abort-upgrade ]; then + exit 0 +fi + +if [ "$1" = install ]; then + # Create a flag file for postinst + mkdir -p /lib/modules/$version + touch /lib/modules/$version/.fresh-install +fi + +if [ -d /etc/kernel/preinst.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/preinst.d +fi + +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x.prerm linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.prerm --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x.prerm 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x.prerm 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,17 @@ +#!/bin/sh -e + +version=4.9.0-2-s390x +image_path=/boot/vmlinuz-$version + +if [ "$1" != remove ]; then + exit 0 +fi + +linux-check-removal $version + +if [ -d /etc/kernel/prerm.d ]; then + DEB_MAINT_PARAMS="$*" run-parts --report --exit-on-error --arg=$version \ + --arg=$image_path /etc/kernel/prerm.d +fi + +exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-s390x image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-s390x-unsigned.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-s390x image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sh7751r.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7751r.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sh7751r.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7751r.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-sh7751r image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sh7751r.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7751r.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sh7751r.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7751r.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-sh7751r image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-sh7785lcr image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sh7785lcr.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-sh7785lcr image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sparc64.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sparc64.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-sparc64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sparc64.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sparc64.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-sparc64 image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.postinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.postinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.postinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.postinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,11 +2,16 @@ version=4.9.0-2-sparc64-smp image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.preinst linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.preinst --- linux-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.preinst 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/linux-image-4.9.0-2-sparc64-smp.preinst 2017-03-12 01:46:14.000000000 +0000 @@ -2,6 +2,7 @@ version=4.9.0-2-sparc64-smp image_path=/boot/vmlinuz-$version +kimage=vmlinuz if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/patches/dummytemplate.diff linux-4.9-4.9.13/debian/patches/dummytemplate.diff --- linux-4.9.13/debian/patches/dummytemplate.diff 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/dummytemplate.diff 2017-03-12 01:46:14.000000000 +0000 @@ -0,0 +1,5 @@ +diff -uN a/1.txt b/1.txt +--- a/dummy/PATCHNAME.txt 1970-01-01 00:00:00.000000000 +0000 ++++ b/dummy/PATCHNAME.txt 2013-12-23 04:07:40.000000000 +0000 +@@ -0,0 +1 @@ ++dummy file to ensure patch has content. diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1000_af7b2569d0e8ab6e685a522f7f078981f4e5cc9c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1000_af7b2569d0e8ab6e685a522f7f078981f4e5cc9c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1000_af7b2569d0e8ab6e685a522f7f078981f4e5cc9c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1000_af7b2569d0e8ab6e685a522f7f078981f4e5cc9c.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,47 @@ +commit af7b2569d0e8ab6e685a522f7f078981f4e5cc9c +Author: Steve Glendinning +Date: Thu Feb 19 18:47:12 2015 +0000 + + smsx95xx: fix crimes against truesize + + smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings. + + This patch stops smsc95xx from changing truesize. + + Signed-off-by: Steve Glendinning + +diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c +index 831aa33d078a..b77935bded8c 100644 +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -82,6 +82,10 @@ static bool turbo_mode = true; + module_param(turbo_mode, bool, 0644); + MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); + ++static bool truesize_mode = false; ++module_param(truesize_mode, bool, 0644); ++MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -1951,7 +1955,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) + if (dev->net->features & NETIF_F_RXCSUM) + smsc95xx_rx_csum_offload(skb); + skb_trim(skb, skb->len - 4); /* remove fcs */ +- skb->truesize = size + sizeof(struct sk_buff); ++ if (truesize_mode) ++ skb->truesize = size + sizeof(struct sk_buff); + + return 1; + } +@@ -1969,7 +1974,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) + if (dev->net->features & NETIF_F_RXCSUM) + smsc95xx_rx_csum_offload(ax_skb); + skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ +- ax_skb->truesize = size + sizeof(struct sk_buff); ++ if (truesize_mode) ++ ax_skb->truesize = size + sizeof(struct sk_buff); + + usbnet_skb_return(dev, ax_skb); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1001_815f9e1fa9e59708218fa64d080d8f46c088889e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1001_815f9e1fa9e59708218fa64d080d8f46c088889e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1001_815f9e1fa9e59708218fa64d080d8f46c088889e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1001_815f9e1fa9e59708218fa64d080d8f46c088889e.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,42 @@ +commit 815f9e1fa9e59708218fa64d080d8f46c088889e +Author: Sam Nazarko +Date: Fri Apr 1 17:27:21 2016 +0100 + + smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default + + See: http://forum.kodi.tv/showthread.php?tid=285288 + +diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c +index b77935bded8c..693f163684de 100644 +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -86,6 +86,10 @@ static bool truesize_mode = false; + module_param(truesize_mode, bool, 0644); + MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); + ++static int packetsize = 2560; ++module_param(packetsize, int, 0644); ++MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -1106,13 +1110,13 @@ static int smsc95xx_reset(struct usbnet *dev) + + if (!turbo_mode) { + burst_cap = 0; +- dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : MAX_SINGLE_PACKET_SIZE; + } else if (dev->udev->speed == USB_SPEED_HIGH) { +- burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; +- dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_HS_BURST_CAP_SIZE; ++ burst_cap = dev->rx_urb_size / HS_USB_PKT_SIZE; + } else { +- burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; +- dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_FS_BURST_CAP_SIZE; ++ burst_cap = dev->rx_urb_size / FS_USB_PKT_SIZE; + } + + netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n", diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1002_9444644b16f69fec912a534e5b2379609cc8d02a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1002_9444644b16f69fec912a534e5b2379609cc8d02a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1002_9444644b16f69fec912a534e5b2379609cc8d02a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1002_9444644b16f69fec912a534e5b2379609cc8d02a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,96 @@ +commit 9444644b16f69fec912a534e5b2379609cc8d02a +Author: popcornmix +Date: Tue Mar 26 17:26:38 2013 +0000 + + Allow mac address to be set in smsc95xx + + Signed-off-by: popcornmix + +diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c +index 693f163684de..df60c989fc22 100644 +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -60,6 +60,7 @@ + #define SUSPEND_SUSPEND3 (0x08) + #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \ + SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3) ++#define MAC_ADDR_LEN (6) + + #define CARRIER_CHECK_DELAY (2 * HZ) + +@@ -90,6 +91,10 @@ static int packetsize = 2560; + module_param(packetsize, int, 0644); + MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); + ++static char *macaddr = ":"; ++module_param(macaddr, charp, 0); ++MODULE_PARM_DESC(macaddr, "MAC address"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -918,6 +923,53 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); + } + ++/* Check the macaddr module parameter for a MAC address */ ++static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac) ++{ ++ int i, j, got_num, num; ++ u8 mtbl[MAC_ADDR_LEN]; ++ ++ if (macaddr[0] == ':') ++ return 0; ++ ++ i = 0; ++ j = 0; ++ num = 0; ++ got_num = 0; ++ while (j < MAC_ADDR_LEN) { ++ if (macaddr[i] && macaddr[i] != ':') { ++ got_num++; ++ if ('0' <= macaddr[i] && macaddr[i] <= '9') ++ num = num * 16 + macaddr[i] - '0'; ++ else if ('A' <= macaddr[i] && macaddr[i] <= 'F') ++ num = num * 16 + 10 + macaddr[i] - 'A'; ++ else if ('a' <= macaddr[i] && macaddr[i] <= 'f') ++ num = num * 16 + 10 + macaddr[i] - 'a'; ++ else ++ break; ++ i++; ++ } else if (got_num == 2) { ++ mtbl[j++] = (u8) num; ++ num = 0; ++ got_num = 0; ++ i++; ++ } else { ++ break; ++ } ++ } ++ ++ if (j == MAC_ADDR_LEN) { ++ netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: " ++ "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2], ++ mtbl[3], mtbl[4], mtbl[5]); ++ for (i = 0; i < MAC_ADDR_LEN; i++) ++ dev_mac[i] = mtbl[i]; ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ + static void smsc95xx_init_mac_address(struct usbnet *dev) + { + const u8 *mac_addr; +@@ -939,6 +991,10 @@ static void smsc95xx_init_mac_address(struct usbnet *dev) + } + } + ++ /* Check module parameters */ ++ if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr)) ++ return; ++ + /* no useful static MAC address found. generate a random one */ + eth_hw_addr_random(dev->net); + netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1003_d3078bd3040aa01758d08993ddc73fc374c5a828.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1003_d3078bd3040aa01758d08993ddc73fc374c5a828.patch --- linux-4.9.13/debian/patches/rpi/rpi_1003_d3078bd3040aa01758d08993ddc73fc374c5a828.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1003_d3078bd3040aa01758d08993ddc73fc374c5a828.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,27 @@ +commit d3078bd3040aa01758d08993ddc73fc374c5a828 +Author: Phil Elwell +Date: Fri Mar 13 12:43:36 2015 +0000 + + Protect __release_resource against resources without parents + + Without this patch, removing a device tree overlay can crash here. + + Signed-off-by: Phil Elwell + +diff --git a/kernel/resource.c b/kernel/resource.c +index 9b5f04404152..f8a9af6e6b91 100644 +--- a/kernel/resource.c ++++ b/kernel/resource.c +@@ -246,6 +246,12 @@ static int __release_resource(struct resource *old, bool release_child) + { + struct resource *tmp, **p, *chd; + ++ if (!old->parent) { ++ WARN(old->sibling, "sibling but no parent"); ++ if (old->sibling) ++ return -EINVAL; ++ return 0; ++ } + p = &old->parent->child; + for (;;) { + tmp = *p; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1004_12b0a8db8b3e2c588212d5c29fda3014fe2a446f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1004_12b0a8db8b3e2c588212d5c29fda3014fe2a446f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1004_12b0a8db8b3e2c588212d5c29fda3014fe2a446f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1004_12b0a8db8b3e2c588212d5c29fda3014fe2a446f.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,25 @@ +commit 12b0a8db8b3e2c588212d5c29fda3014fe2a446f +Author: Eric Anholt +Date: Thu Dec 18 16:07:15 2014 -0800 + + mm: Remove the PFN busy warning + + See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is + expected sometimes when using CMA. However, that commit still spams + my kernel log with these warnings. + + Signed-off-by: Eric Anholt + +diff --git a/mm/page_alloc.c b/mm/page_alloc.c +index f4a02e240fb6..0e1fba927028 100644 +--- a/mm/page_alloc.c ++++ b/mm/page_alloc.c +@@ -7323,8 +7323,6 @@ int alloc_contig_range(unsigned long start, unsigned long end, + + /* Make sure the range is really isolated. */ + if (test_pages_isolated(outer_start, end, false)) { +- pr_info("%s: [%lx, %lx) PFNs busy\n", +- __func__, outer_start, end); + ret = -EBUSY; + goto done; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1005_61628076b44e9e2f2ab0c8bf229c3eae52af9fca.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1005_61628076b44e9e2f2ab0c8bf229c3eae52af9fca.patch --- linux-4.9.13/debian/patches/rpi/rpi_1005_61628076b44e9e2f2ab0c8bf229c3eae52af9fca.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1005_61628076b44e9e2f2ab0c8bf229c3eae52af9fca.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,26 @@ +commit 61628076b44e9e2f2ab0c8bf229c3eae52af9fca +Author: Phil Elwell +Date: Fri Dec 4 17:41:50 2015 +0000 + + irq-bcm2836: Prevent spurious interrupts, and trap them early + + The old arch-specific IRQ macros included a dsb to ensure the + write to clear the mailbox interrupt completed before returning + from the interrupt. The BCM2836 irqchip driver needs the same + precaution to avoid spurious interrupts. + + Spurious interrupts are still possible for other reasons, + though, so trap them early. + +diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c +index d96b2c947e74..93e3f7660c42 100644 +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -175,6 +175,7 @@ __exception_irq_entry bcm2836_arm_irqchip_handle_irq(struct pt_regs *regs) + u32 ipi = ffs(mbox_val) - 1; + + writel(1 << ipi, mailbox0); ++ dsb(sy); + handle_IPI(ipi, regs); + #endif + } else if (stat) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1006_97fa68ff0087bb3730e06da3b438c164c6eb1794.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1006_97fa68ff0087bb3730e06da3b438c164c6eb1794.patch --- linux-4.9.13/debian/patches/rpi/rpi_1006_97fa68ff0087bb3730e06da3b438c164c6eb1794.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1006_97fa68ff0087bb3730e06da3b438c164c6eb1794.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,125 @@ +commit 97fa68ff0087bb3730e06da3b438c164c6eb1794 +Author: Noralf Trønnes +Date: Fri Jun 12 19:01:05 2015 +0200 + + irqchip: bcm2835: Add FIQ support + + Add a duplicate irq range with an offset on the hwirq's so the + driver can detect that enable_fiq() is used. + Tested with downstream dwc_otg USB controller driver. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + Acked-by: Stephen Warren + +diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig +index a0e66d8200c5..4ff30d5278a7 100644 +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -152,6 +152,7 @@ config ARCH_BCM2835 + select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 + select CLKSRC_OF + select BCM2835_TIMER ++ select FIQ + select PINCTRL + select PINCTRL_BCM2835 + help +diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c +index 44d7c38dde47..42ff5e6a8e0d 100644 +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -54,7 +54,7 @@ + #include + + /* Put the bank and irq (32 bits) into the hwirq */ +-#define MAKE_HWIRQ(b, n) ((b << 5) | (n)) ++#define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) + #define HWIRQ_BANK(i) (i >> 5) + #define HWIRQ_BIT(i) BIT(i & 0x1f) + +@@ -70,9 +70,13 @@ + | SHORTCUT1_MASK | SHORTCUT2_MASK) + + #define REG_FIQ_CONTROL 0x0c ++#define REG_FIQ_ENABLE 0x80 ++#define REG_FIQ_DISABLE 0 + + #define NR_BANKS 3 + #define IRQS_PER_BANK 32 ++#define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) ++#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) + + static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; + static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; +@@ -97,14 +101,38 @@ static void __exception_irq_entry bcm2835_handle_irq( + struct pt_regs *regs); + static void bcm2836_chained_handle_irq(struct irq_desc *desc); + ++static inline unsigned int hwirq_to_fiq(unsigned long hwirq) ++{ ++ hwirq -= NUMBER_IRQS; ++ /* ++ * The hwirq numbering used in this driver is: ++ * BASE (0-7) GPU1 (32-63) GPU2 (64-95). ++ * This differ from the one used in the FIQ register: ++ * GPU1 (0-31) GPU2 (32-63) BASE (64-71) ++ */ ++ if (hwirq >= 32) ++ return hwirq - 32; ++ ++ return hwirq + 64; ++} ++ + static void armctrl_mask_irq(struct irq_data *d) + { +- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); ++ if (d->hwirq >= NUMBER_IRQS) ++ writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL); ++ else ++ writel_relaxed(HWIRQ_BIT(d->hwirq), ++ intc.disable[HWIRQ_BANK(d->hwirq)]); + } + + static void armctrl_unmask_irq(struct irq_data *d) + { +- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); ++ if (d->hwirq >= NUMBER_IRQS) ++ writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), ++ intc.base + REG_FIQ_CONTROL); ++ else ++ writel_relaxed(HWIRQ_BIT(d->hwirq), ++ intc.enable[HWIRQ_BANK(d->hwirq)]); + } + + static struct irq_chip armctrl_chip = { +@@ -150,8 +178,9 @@ static int __init armctrl_of_init(struct device_node *node, + panic("%s: unable to map IC registers\n", + node->full_name); + +- intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), +- &armctrl_ops, NULL); ++ intc.base = base; ++ intc.domain = irq_domain_add_linear(node, NUMBER_IRQS * 2, ++ &armctrl_ops, NULL); + if (!intc.domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + +@@ -181,6 +210,18 @@ static int __init armctrl_of_init(struct device_node *node, + set_handle_irq(bcm2835_handle_irq); + } + ++ /* Make a duplicate irq range which is used to enable FIQ */ ++ for (b = 0; b < NR_BANKS; b++) { ++ for (i = 0; i < bank_irqs[b]; i++) { ++ irq = irq_create_mapping(intc.domain, ++ MAKE_HWIRQ(b, i) + NUMBER_IRQS); ++ BUG_ON(irq <= 0); ++ irq_set_chip(irq, &armctrl_chip); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ } ++ init_FIQ(FIQ_START); ++ + return 0; + } + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1007_6f35fd019bda4c10d01214821f7a19d4b1d66dbc.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1007_6f35fd019bda4c10d01214821f7a19d4b1d66dbc.patch --- linux-4.9.13/debian/patches/rpi/rpi_1007_6f35fd019bda4c10d01214821f7a19d4b1d66dbc.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1007_6f35fd019bda4c10d01214821f7a19d4b1d66dbc.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,96 @@ +commit 6f35fd019bda4c10d01214821f7a19d4b1d66dbc +Author: Noralf Trønnes +Date: Fri Oct 23 16:26:55 2015 +0200 + + irqchip: irq-bcm2835: Add 2836 FIQ support + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c +index 42ff5e6a8e0d..eccf6ed02529 100644 +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -50,8 +50,11 @@ + #include + #include + #include ++#include ++#include + + #include ++#include + + /* Put the bank and irq (32 bits) into the hwirq */ + #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) +@@ -69,6 +72,9 @@ + #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ + | SHORTCUT1_MASK | SHORTCUT2_MASK) + ++#undef ARM_LOCAL_GPU_INT_ROUTING ++#define ARM_LOCAL_GPU_INT_ROUTING 0x0c ++ + #define REG_FIQ_CONTROL 0x0c + #define REG_FIQ_ENABLE 0x80 + #define REG_FIQ_DISABLE 0 +@@ -94,6 +100,7 @@ struct armctrl_ic { + void __iomem *enable[NR_BANKS]; + void __iomem *disable[NR_BANKS]; + struct irq_domain *domain; ++ struct regmap *local_regmap; + }; + + static struct armctrl_ic intc __read_mostly; +@@ -127,12 +134,35 @@ static void armctrl_mask_irq(struct irq_data *d) + + static void armctrl_unmask_irq(struct irq_data *d) + { +- if (d->hwirq >= NUMBER_IRQS) ++ if (d->hwirq >= NUMBER_IRQS) { ++ if (num_online_cpus() > 1) { ++ unsigned int data; ++ int ret; ++ ++ if (!intc.local_regmap) { ++ pr_err("FIQ is disabled due to missing regmap\n"); ++ return; ++ } ++ ++ ret = regmap_read(intc.local_regmap, ++ ARM_LOCAL_GPU_INT_ROUTING, &data); ++ if (ret) { ++ pr_err("Failed to read int routing %d\n", ret); ++ return; ++ } ++ ++ data &= ~0xc; ++ data |= (1 << 2); ++ regmap_write(intc.local_regmap, ++ ARM_LOCAL_GPU_INT_ROUTING, data); ++ } ++ + writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), + intc.base + REG_FIQ_CONTROL); +- else ++ } else { + writel_relaxed(HWIRQ_BIT(d->hwirq), + intc.enable[HWIRQ_BANK(d->hwirq)]); ++ } + } + + static struct irq_chip armctrl_chip = { +@@ -210,6 +240,15 @@ static int __init armctrl_of_init(struct device_node *node, + set_handle_irq(bcm2835_handle_irq); + } + ++ if (is_2836) { ++ intc.local_regmap = ++ syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local"); ++ if (IS_ERR(intc.local_regmap)) { ++ pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n"); ++ intc.local_regmap = NULL; ++ } ++ } ++ + /* Make a duplicate irq range which is used to enable FIQ */ + for (b = 0; b < NR_BANKS; b++) { + for (i = 0; i < bank_irqs[b]; i++) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1008_f32340ecc98314033f6fa6e25f2796f3a2ff7c64.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1008_f32340ecc98314033f6fa6e25f2796f3a2ff7c64.patch --- linux-4.9.13/debian/patches/rpi/rpi_1008_f32340ecc98314033f6fa6e25f2796f3a2ff7c64.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1008_f32340ecc98314033f6fa6e25f2796f3a2ff7c64.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,20 @@ +commit f32340ecc98314033f6fa6e25f2796f3a2ff7c64 +Author: Phil Elwell +Date: Tue Jul 14 10:26:09 2015 +0100 + + spidev: Add "spidev" compatible string to silence warning + + See: https://github.com/raspberrypi/linux/issues/1054 + +diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c +index 2e05046f866b..d780491b8013 100644 +--- a/drivers/spi/spidev.c ++++ b/drivers/spi/spidev.c +@@ -696,6 +696,7 @@ static struct class *spidev_class; + static const struct of_device_id spidev_dt_ids[] = { + { .compatible = "rohm,dh2228fv" }, + { .compatible = "lineartechnology,ltc2488" }, ++ { .compatible = "spidev" }, + {}, + }; + MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1009_42807f1d6308d5e1fac6c41ef99496403e833217.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1009_42807f1d6308d5e1fac6c41ef99496403e833217.patch --- linux-4.9.13/debian/patches/rpi/rpi_1009_42807f1d6308d5e1fac6c41ef99496403e833217.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1009_42807f1d6308d5e1fac6c41ef99496403e833217.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,19 @@ +commit 42807f1d6308d5e1fac6c41ef99496403e833217 +Author: Phil Elwell +Date: Tue Jun 30 14:12:42 2015 +0100 + + serial: 8250: Don't crash when nr_uarts is 0 + +diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c +index e8819aa20415..cf9c7d2e3f95 100644 +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -509,6 +509,8 @@ static void __init serial8250_isa_init_ports(void) + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; ++ if (!nr_uarts) ++ return; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1010_9ceb205fb57c04aee6e587746fd0c6fb4234f01a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1010_9ceb205fb57c04aee6e587746fd0c6fb4234f01a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1010_9ceb205fb57c04aee6e587746fd0c6fb4234f01a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1010_9ceb205fb57c04aee6e587746fd0c6fb4234f01a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,21 @@ +commit 9ceb205fb57c04aee6e587746fd0c6fb4234f01a +Author: notro +Date: Thu Jul 10 13:59:47 2014 +0200 + + pinctrl-bcm2835: Set base to 0 give expected gpio numbering + + Signed-off-by: Noralf Tronnes + +diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +index fa77165fab2c..d11e2e4ea189 100644 +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -386,7 +386,7 @@ static struct gpio_chip bcm2835_gpio_chip = { + .get = bcm2835_gpio_get, + .set = bcm2835_gpio_set, + .to_irq = bcm2835_gpio_to_irq, +- .base = -1, ++ .base = 0, + .ngpio = BCM2835_NUM_GPIOS, + .can_sleep = false, + }; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1011_3c73a0ceea4444fac6975fc23197ea5ee95de644.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1011_3c73a0ceea4444fac6975fc23197ea5ee95de644.patch --- linux-4.9.13/debian/patches/rpi/rpi_1011_3c73a0ceea4444fac6975fc23197ea5ee95de644.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1011_3c73a0ceea4444fac6975fc23197ea5ee95de644.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,145 @@ +commit 3c73a0ceea4444fac6975fc23197ea5ee95de644 +Author: Phil Elwell +Date: Tue Feb 24 13:40:50 2015 +0000 + + pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and 46-53 + + Contrary to the documentation, the BCM2835 GPIO controller actually has + four interrupt lines - one each for the three IRQ groups and one common. Rather + confusingly, the GPIO interrupt groups don't correspond directly with the GPIO + control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and + 46-53 GPIO2. + + Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is + cleaner to split out a function to process the interrupts for a single GPIO + bank. + + This bug has only just been observed because GPIOs above 27 can only be + accessed on an old Raspberry Pi with the optional P5 header fitted, where + the pins are often used for I2S instead. + +diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +index d11e2e4ea189..107ad7d58de8 100644 +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -47,6 +47,7 @@ + #define MODULE_NAME "pinctrl-bcm2835" + #define BCM2835_NUM_GPIOS 54 + #define BCM2835_NUM_BANKS 2 ++#define BCM2835_NUM_IRQS 3 + + #define BCM2835_PIN_BITMAP_SZ \ + DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) +@@ -88,13 +89,13 @@ enum bcm2835_pinconf_pull { + + struct bcm2835_gpio_irqdata { + struct bcm2835_pinctrl *pc; +- int bank; ++ int irqgroup; + }; + + struct bcm2835_pinctrl { + struct device *dev; + void __iomem *base; +- int irq[BCM2835_NUM_BANKS]; ++ int irq[BCM2835_NUM_IRQS]; + + /* note: locking assumes each bank will have its own unsigned long */ + unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; +@@ -105,7 +106,7 @@ struct bcm2835_pinctrl { + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; + +- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; ++ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS]; + spinlock_t irq_lock[BCM2835_NUM_BANKS]; + }; + +@@ -391,17 +392,16 @@ static struct gpio_chip bcm2835_gpio_chip = { + .can_sleep = false, + }; + +-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) ++static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc, ++ unsigned int bank, u32 mask) + { +- struct bcm2835_gpio_irqdata *irqdata = dev_id; +- struct bcm2835_pinctrl *pc = irqdata->pc; +- int bank = irqdata->bank; + unsigned long events; + unsigned offset; + unsigned gpio; + unsigned int type; + + events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); ++ events &= mask; + events &= pc->enabled_irq_map[bank]; + for_each_set_bit(offset, &events, 32) { + gpio = (32 * bank) + offset; +@@ -409,7 +409,30 @@ static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) + + generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); + } +- return events ? IRQ_HANDLED : IRQ_NONE; ++ ++ return (events != 0); ++} ++ ++static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) ++{ ++ struct bcm2835_gpio_irqdata *irqdata = dev_id; ++ struct bcm2835_pinctrl *pc = irqdata->pc; ++ int handled = 0; ++ ++ switch (irqdata->irqgroup) { ++ case 0: /* IRQ0 covers GPIOs 0-27 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff); ++ break; ++ case 1: /* IRQ1 covers GPIOs 28-45 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) | ++ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff); ++ break; ++ case 2: /* IRQ2 covers GPIOs 46-53 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000); ++ break; ++ } ++ ++ return handled ? IRQ_HANDLED : IRQ_NONE; + } + + static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, +@@ -998,8 +1021,6 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) + for (i = 0; i < BCM2835_NUM_BANKS; i++) { + unsigned long events; + unsigned offset; +- int len; +- char *name; + + /* clear event detection flags */ + bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); +@@ -1014,10 +1035,15 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) + for_each_set_bit(offset, &events, 32) + bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); + ++ spin_lock_init(&pc->irq_lock[i]); ++ } ++ ++ for (i = 0; i < BCM2835_NUM_IRQS; i++) { ++ int len; ++ char *name; + pc->irq[i] = irq_of_parse_and_map(np, i); + pc->irq_data[i].pc = pc; +- pc->irq_data[i].bank = i; +- spin_lock_init(&pc->irq_lock[i]); ++ pc->irq_data[i].irqgroup = i; + + len = strlen(dev_name(pc->dev)) + 16; + name = devm_kzalloc(pc->dev, len, GFP_KERNEL); +@@ -1074,6 +1100,7 @@ static struct platform_driver bcm2835_pinctrl_driver = { + .remove = bcm2835_pinctrl_remove, + .driver = { + .name = MODULE_NAME, ++ .owner = THIS_MODULE, + .of_match_table = bcm2835_pinctrl_match, + }, + }; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1012_3b18e342423104d324e9480a612fb537aecb189c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1012_3b18e342423104d324e9480a612fb537aecb189c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1012_3b18e342423104d324e9480a612fb537aecb189c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1012_3b18e342423104d324e9480a612fb537aecb189c.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,26 @@ +commit 3b18e342423104d324e9480a612fb537aecb189c +Author: Phil Elwell +Date: Thu Feb 26 09:58:22 2015 +0000 + + pinctrl-bcm2835: Only request the interrupts listed in the DTB + + Although the GPIO controller can generate three interrupts (four counting + the common one), the device tree files currently only specify two. In the + absence of the third, simply don't register that interrupt (as opposed to + registering 0), which has the effect of making it impossible to generate + interrupts for GPIOs 46-53 which, since they share pins with the SD card + interface, is unlikely to be a problem. + +diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +index 107ad7d58de8..644bdecbcfcb 100644 +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -1042,6 +1042,8 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) + int len; + char *name; + pc->irq[i] = irq_of_parse_and_map(np, i); ++ if (pc->irq[i] == 0) ++ break; + pc->irq_data[i].pc = pc; + pc->irq_data[i].irqgroup = i; + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1013_517968a97c7fc43833d9305df92c22050f33acd6.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1013_517968a97c7fc43833d9305df92c22050f33acd6.patch --- linux-4.9.13/debian/patches/rpi/rpi_1013_517968a97c7fc43833d9305df92c22050f33acd6.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1013_517968a97c7fc43833d9305df92c22050f33acd6.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,41 @@ +commit 517968a97c7fc43833d9305df92c22050f33acd6 +Author: Phil Elwell +Date: Fri May 6 12:32:47 2016 +0100 + + pinctrl-bcm2835: Return pins to inputs when freed + + When dynamically unloading overlays, it is important that freed pins are + restored to being inputs to prevent functions from being enabled in + multiple places at once. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +index 644bdecbcfcb..81a66cba2ab0 100644 +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -844,6 +844,16 @@ static const struct pinctrl_ops bcm2835_pctl_ops = { + .dt_free_map = bcm2835_pctl_dt_free_map, + }; + ++static int bcm2835_pmx_free(struct pinctrl_dev *pctldev, ++ unsigned offset) ++{ ++ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable by setting to GPIO_IN */ ++ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); ++ return 0; ++} ++ + static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) + { + return BCM2835_FSEL_COUNT; +@@ -903,6 +913,7 @@ static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + } + + static const struct pinmux_ops bcm2835_pmx_ops = { ++ .free = bcm2835_pmx_free, + .get_functions_count = bcm2835_pmx_get_functions_count, + .get_function_name = bcm2835_pmx_get_function_name, + .get_function_groups = bcm2835_pmx_get_function_groups, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1014_e29744943accac6a4ba9628416ccdaf8290e56a9.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1014_e29744943accac6a4ba9628416ccdaf8290e56a9.patch --- linux-4.9.13/debian/patches/rpi/rpi_1014_e29744943accac6a4ba9628416ccdaf8290e56a9.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1014_e29744943accac6a4ba9628416ccdaf8290e56a9.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,81 @@ +commit e29744943accac6a4ba9628416ccdaf8290e56a9 +Author: Phil Elwell +Date: Wed Jun 24 14:10:44 2015 +0100 + + spi-bcm2835: Support pin groups other than 7-11 + + The spi-bcm2835 driver automatically uses GPIO chip-selects due to + some unreliability of the native ones. In doing so it chooses the + same pins as the native chip-selects would use, but the existing + code always uses pins 7 and 8, wherever the SPI function is mapped. + + Search the pinctrl group assigned to the driver for pins that + correspond to native chip-selects, and use those for GPIO chip- + selects. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c +index f35cc10772f6..5dfe20ffc286 100644 +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -688,6 +688,8 @@ static int bcm2835_spi_setup(struct spi_device *spi) + { + int err; + struct gpio_chip *chip; ++ struct device_node *pins; ++ u32 pingroup_index; + /* + * sanity checking the native-chipselects + */ +@@ -704,15 +706,42 @@ static int bcm2835_spi_setup(struct spi_device *spi) + "setup: only two native chip-selects are supported\n"); + return -EINVAL; + } +- /* now translate native cs to GPIO */ +- +- /* get the gpio chip for the base */ +- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); +- if (!chip) +- return 0; + +- /* and calculate the real CS */ +- spi->cs_gpio = chip->base + 8 - spi->chip_select; ++ /* now translate native cs to GPIO */ ++ /* first look for chip select pins in the devices pin groups */ ++ for (pingroup_index = 0; ++ (pins = of_parse_phandle(spi->master->dev.of_node, ++ "pinctrl-0", ++ pingroup_index)) != 0; ++ pingroup_index++) { ++ u32 pin; ++ u32 pin_index; ++ for (pin_index = 0; ++ of_property_read_u32_index(pins, ++ "brcm,pins", ++ pin_index, ++ &pin) == 0; ++ pin_index++) { ++ if (((spi->chip_select == 0) && ++ ((pin == 8) || (pin == 36) || (pin == 46))) || ++ ((spi->chip_select == 1) && ++ ((pin == 7) || (pin == 35)))) { ++ spi->cs_gpio = pin; ++ break; ++ } ++ } ++ of_node_put(pins); ++ } ++ /* if that fails, assume GPIOs 7-11 are used */ ++ if (!gpio_is_valid(spi->cs_gpio) ) { ++ /* get the gpio chip for the base */ ++ chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); ++ if (!chip) ++ return 0; ++ ++ /* and calculate the real CS */ ++ spi->cs_gpio = chip->base + 8 - spi->chip_select; ++ } + + /* and set up the "mode" and level */ + dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1015_e6027cea1977a0b21fa58b0658e4551165994ef1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1015_e6027cea1977a0b21fa58b0658e4551165994ef1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1015_e6027cea1977a0b21fa58b0658e4551165994ef1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1015_e6027cea1977a0b21fa58b0658e4551165994ef1.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,34 @@ +commit e6027cea1977a0b21fa58b0658e4551165994ef1 +Author: Phil Elwell +Date: Fri Jul 1 22:09:24 2016 +0100 + + spi-bcm2835: Disable forced software CS + + Select software CS in bcm2708_common.dtsi, and disable the automatic + conversion in the driver to allow hardware CS to be re-enabled with an + overlay. + + See: https://github.com/raspberrypi/linux/issues/1547 + + Signed-off-by: Phil Elwell + +diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c +index 5dfe20ffc286..8493474d286f 100644 +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -707,6 +707,7 @@ static int bcm2835_spi_setup(struct spi_device *spi) + return -EINVAL; + } + ++#if 0 + /* now translate native cs to GPIO */ + /* first look for chip select pins in the devices pin groups */ + for (pingroup_index = 0; +@@ -756,6 +757,7 @@ static int bcm2835_spi_setup(struct spi_device *spi) + spi->chip_select, spi->cs_gpio, err); + return err; + } ++#endif + + return 0; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1016_7bb68eae08582db1f0d07151c3f38ab711fa2b7b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1016_7bb68eae08582db1f0d07151c3f38ab711fa2b7b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1016_7bb68eae08582db1f0d07151c3f38ab711fa2b7b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1016_7bb68eae08582db1f0d07151c3f38ab711fa2b7b.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,87 @@ +commit 7bb68eae08582db1f0d07151c3f38ab711fa2b7b +Author: Phil Elwell +Date: Tue Nov 8 21:35:38 2016 +0000 + + spi-bcm2835: Remove unused code + +diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c +index 8493474d286f..33d75ad38a7f 100644 +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -679,17 +679,8 @@ static void bcm2835_spi_set_cs(struct spi_device *spi, bool gpio_level) + bcm2835_wr(bs, BCM2835_SPI_CS, cs); + } + +-static int chip_match_name(struct gpio_chip *chip, void *data) +-{ +- return !strcmp(chip->label, data); +-} +- + static int bcm2835_spi_setup(struct spi_device *spi) + { +- int err; +- struct gpio_chip *chip; +- struct device_node *pins; +- u32 pingroup_index; + /* + * sanity checking the native-chipselects + */ +@@ -707,58 +698,6 @@ static int bcm2835_spi_setup(struct spi_device *spi) + return -EINVAL; + } + +-#if 0 +- /* now translate native cs to GPIO */ +- /* first look for chip select pins in the devices pin groups */ +- for (pingroup_index = 0; +- (pins = of_parse_phandle(spi->master->dev.of_node, +- "pinctrl-0", +- pingroup_index)) != 0; +- pingroup_index++) { +- u32 pin; +- u32 pin_index; +- for (pin_index = 0; +- of_property_read_u32_index(pins, +- "brcm,pins", +- pin_index, +- &pin) == 0; +- pin_index++) { +- if (((spi->chip_select == 0) && +- ((pin == 8) || (pin == 36) || (pin == 46))) || +- ((spi->chip_select == 1) && +- ((pin == 7) || (pin == 35)))) { +- spi->cs_gpio = pin; +- break; +- } +- } +- of_node_put(pins); +- } +- /* if that fails, assume GPIOs 7-11 are used */ +- if (!gpio_is_valid(spi->cs_gpio) ) { +- /* get the gpio chip for the base */ +- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); +- if (!chip) +- return 0; +- +- /* and calculate the real CS */ +- spi->cs_gpio = chip->base + 8 - spi->chip_select; +- } +- +- /* and set up the "mode" and level */ +- dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", +- spi->chip_select, spi->cs_gpio); +- +- /* set up GPIO as output and pull to the correct level */ +- err = gpio_direction_output(spi->cs_gpio, +- (spi->mode & SPI_CS_HIGH) ? 0 : 1); +- if (err) { +- dev_err(&spi->dev, +- "could not set CS%i gpio %i as output: %i", +- spi->chip_select, spi->cs_gpio, err); +- return err; +- } +-#endif +- + return 0; + } + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1017_754abebd93ea0fb34517284408bc876f6098a4d0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1017_754abebd93ea0fb34517284408bc876f6098a4d0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1017_754abebd93ea0fb34517284408bc876f6098a4d0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1017_754abebd93ea0fb34517284408bc876f6098a4d0.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,50 @@ +commit 754abebd93ea0fb34517284408bc876f6098a4d0 +Author: Noralf Trønnes +Date: Wed Jun 3 12:26:13 2015 +0200 + + ARM: bcm2835: Set Serial number and Revision + + The VideoCore bootloader passes in Serial number and + Revision number through Device Tree. Make these available to + userspace through /proc/cpuinfo. + + Mainline status: + + There is a commit in linux-next that standardize passing the serial + number through Device Tree (string: /serial-number): + ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo + + There was an attempt to do the same with the revision number, but it + didn't get in: + [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision + + Signed-off-by: Noralf Trønnes + +diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c +index 0c1edfc98696..8f152266ba9b 100644 +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -16,13 +16,23 @@ + #include + #include + #include ++#include + + #include + #include + + static void __init bcm2835_init(void) + { ++ struct device_node *np = of_find_node_by_path("/system"); ++ u32 val; ++ u64 val64; ++ + bcm2835_init_clocks(); ++ ++ if (!of_property_read_u32(np, "linux,revision", &val)) ++ system_rev = val; ++ if (!of_property_read_u64(np, "linux,serial", &val64)) ++ system_serial_low = val64; + } + + static const char * const bcm2835_compat[] = { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1018_42a2df4564b1f34004645d362d82d411b28c8871.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1018_42a2df4564b1f34004645d362d82d411b28c8871.patch --- linux-4.9.13/debian/patches/rpi/rpi_1018_42a2df4564b1f34004645d362d82d411b28c8871.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1018_42a2df4564b1f34004645d362d82d411b28c8871.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,98 @@ +commit 42a2df4564b1f34004645d362d82d411b28c8871 +Author: Noralf Trønnes +Date: Sat Oct 3 22:22:55 2015 +0200 + + dmaengine: bcm2835: Load driver early and support legacy API + + Load driver early since at least bcm2708_fb doesn't support deferred + probing and even if it did, we don't want the video driver deferred. + Support the legacy DMA API which is needed by bcm2708_fb. + Don't mask out channel 2. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig +index 141aefbe37ec..9c931d36c6a4 100644 +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -108,7 +108,7 @@ config COH901318 + + config DMA_BCM2835 + tristate "BCM2835 DMA engine support" +- depends on ARCH_BCM2835 ++ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c +index e18dc596cf24..80d35f760b4a 100644 +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -48,6 +49,7 @@ + + #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 + #define BCM2835_DMA_CHAN_NAME_SIZE 8 ++#define BCM2835_DMA_BULK_MASK BIT(0) + + struct bcm2835_dmadev { + struct dma_device ddev; +@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct platform_device *pdev) + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); ++ rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); ++ if (rc) ++ dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); + + od->base = base; + +@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct platform_device *pdev) + goto err_no_dma; + } + ++ /* Channel 0 is used by the legacy API */ ++ chans_available &= ~BCM2835_DMA_BULK_MASK; ++ + /* get irqs for each channel that we support */ + for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { + /* skip masked out channels */ +@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct platform_device *pdev) + { + struct bcm2835_dmadev *od = platform_get_drvdata(pdev); + ++ bcm_dmaman_remove(pdev); + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + +@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dma_driver = { + }, + }; + +-module_platform_driver(bcm2835_dma_driver); ++static int bcm2835_dma_init(void) ++{ ++ return platform_driver_register(&bcm2835_dma_driver); ++} ++ ++static void bcm2835_dma_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_dma_driver); ++} ++ ++/* ++ * Load after serial driver (arch_initcall) so we see the messages if it fails, ++ * but before drivers (module_init) that need a DMA channel. ++ */ ++subsys_initcall(bcm2835_dma_init); ++module_exit(bcm2835_dma_exit); + + MODULE_ALIAS("platform:bcm2835-dma"); + MODULE_DESCRIPTION("BCM2835 DMA engine driver"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1019_5389d03a3d68755c924e59aeeff506f941a74d0c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1019_5389d03a3d68755c924e59aeeff506f941a74d0c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1019_5389d03a3d68755c924e59aeeff506f941a74d0c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1019_5389d03a3d68755c924e59aeeff506f941a74d0c.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,62 @@ +commit 5389d03a3d68755c924e59aeeff506f941a74d0c +Author: popcornmix +Date: Mon Jan 25 17:25:12 2016 +0000 + + firmware: Updated mailbox header + +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index 3fb357193f09..227a107214a0 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008, + RPI_FIRMWARE_GET_TURBO = 0x00030009, + RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a, ++ RPI_FIRMWARE_GET_STC = 0x0003000b, + RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c, + RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d, + RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e, +@@ -72,12 +73,15 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, + RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, ++ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, + RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, + RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, + RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, + RPI_FIRMWARE_SET_TURBO = 0x00038009, ++ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, ++ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, + + /* Dispmanx TAGS */ + RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, +@@ -91,6 +95,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, +@@ -100,6 +106,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, +@@ -108,6 +115,10 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, ++ ++ RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1020_2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1020_2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543.patch --- linux-4.9.13/debian/patches/rpi/rpi_1020_2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1020_2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,37 @@ +commit 2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543 +Author: Eric Anholt +Date: Mon May 9 17:28:18 2016 -0700 + + clk: bcm2835: Mark GPIO clocks enabled at boot as critical. + + These divide off of PLLD_PER and are used for the ethernet and wifi + PHYs source PLLs. Neither of them is currently represented by a phy + device that would grab the clock for us. + + This keeps other drivers from killing the networking PHYs when they + disable their own clocks and trigger PLLD_PER's refcount going to 0. + + v2: Skip marking as critical if they aren't on at boot. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 3bbd2a58db47..7040c6426e35 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1262,6 +1262,15 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, + init.name = data->name; + init.flags = data->flags | CLK_IGNORE_UNUSED; + ++ /* ++ * Some GPIO clocks for ethernet/wifi PLLs are marked as ++ * critical (since some platforms use them), but if the ++ * firmware didn't have them turned on then they clearly ++ * aren't actually critical. ++ */ ++ if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) ++ init.flags &= ~CLK_IS_CRITICAL; ++ + if (data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1021_9ba63463e52572505f1b05bd77524123e338a154.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1021_9ba63463e52572505f1b05bd77524123e338a154.patch --- linux-4.9.13/debian/patches/rpi/rpi_1021_9ba63463e52572505f1b05bd77524123e338a154.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1021_9ba63463e52572505f1b05bd77524123e338a154.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,20 @@ +commit 9ba63463e52572505f1b05bd77524123e338a154 +Author: Phil Elwell +Date: Wed Jun 15 16:48:41 2016 +0100 + + rtc: Add SPI alias for pcf2123 driver + + Without this alias, Device Tree won't cause the driver + to be loaded. + + See: https://github.com/raspberrypi/linux/pull/1510 + +diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c +index 8895f77726e8..1833b8853ceb 100644 +--- a/drivers/rtc/rtc-pcf2123.c ++++ b/drivers/rtc/rtc-pcf2123.c +@@ -472,3 +472,4 @@ module_spi_driver(pcf2123_driver); + MODULE_AUTHOR("Chris Verges "); + MODULE_DESCRIPTION("NXP PCF2123 RTC driver"); + MODULE_LICENSE("GPL"); ++MODULE_ALIAS("spi:rtc-pcf2123"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1022_29f639773978fb429316f7476238f484f4379c94.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1022_29f639773978fb429316f7476238f484f4379c94.patch --- linux-4.9.13/debian/patches/rpi/rpi_1022_29f639773978fb429316f7476238f484f4379c94.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1022_29f639773978fb429316f7476238f484f4379c94.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,121 @@ +commit 29f639773978fb429316f7476238f484f4379c94 +Author: Noralf Trønnes +Date: Fri Oct 7 16:50:59 2016 +0200 + + watchdog: bcm2835: Support setting reboot partition + + The Raspberry Pi firmware looks at the RSTS register to know which + partition to boot from. The reboot syscall command + LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument. + + Add support for passing in a partition number 0..63 to boot from. + Partition 63 is a special partiton indicating halt. + If the partition doesn't exist, the firmware falls back to partition 0. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c +index 4dddd8298a22..1f545e024422 100644 +--- a/drivers/watchdog/bcm2835_wdt.c ++++ b/drivers/watchdog/bcm2835_wdt.c +@@ -35,13 +35,7 @@ + #define PM_RSTC_WRCFG_SET 0x00000030 + #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + #define PM_RSTC_RESET 0x00000102 +- +-/* +- * The Raspberry Pi firmware uses the RSTS register to know which partiton +- * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. +- * Partiton 63 is a special partition used by the firmware to indicate halt. +- */ +-#define PM_RSTS_RASPBERRYPI_HALT 0x555 ++#define PM_RSTS_PARTITION_CLR 0xfffffaaa + + #define SECS_TO_WDOG_TICKS(x) ((x) << 16) + #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) +@@ -111,15 +105,28 @@ static struct watchdog_device bcm2835_wdt_wdd = { + .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), + }; + +-static int +-bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd) ++/* ++ * The Raspberry Pi firmware uses the RSTS register to know which partiton ++ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. ++ * Partiton 63 is a special partition used by the firmware to indicate halt. ++ */ ++ ++static void bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition) + { +- struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, +- restart_handler); +- u32 val; ++ u32 val, rsts; ++ ++ rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) | ++ ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) | ++ ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5); ++ ++ val = readl_relaxed(wdt->base + PM_RSTS); ++ val &= PM_RSTS_PARTITION_CLR; ++ val |= PM_PASSWORD | rsts; ++ writel_relaxed(val, wdt->base + PM_RSTS); + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); ++ + val = readl_relaxed(wdt->base + PM_RSTC); + val &= PM_RSTC_WRCFG_CLR; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; +@@ -127,6 +134,20 @@ bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd) + + /* No sleeping, possibly atomic. */ + mdelay(1); ++} ++ ++static int bcm2835_restart_notifier_call(struct notifier_block *this, ++ unsigned long mode, void *cmd) ++{ ++ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, ++ restart_handler); ++ unsigned long long val; ++ u8 partition = 0; ++ ++ if (cmd && !kstrtoull(cmd, 0, &val) && val <= 63) ++ partition = val; ++ ++ bcm2835_restart(wdt, partition); + + return 0; + } +@@ -142,19 +163,9 @@ static void bcm2835_power_off(void) + of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); + struct platform_device *pdev = of_find_device_by_node(np); + struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); +- u32 val; +- +- /* +- * We set the watchdog hard reset bit here to distinguish this reset +- * from the normal (full) reset. bootcode.bin will not reboot after a +- * hard reset. +- */ +- val = readl_relaxed(wdt->base + PM_RSTS); +- val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; +- writel_relaxed(val, wdt->base + PM_RSTS); + +- /* Continue with normal reset mechanism */ +- bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL); ++ /* Partition 63 tells the firmware that this is a halt */ ++ bcm2835_restart(wdt, 63); + } + + static int bcm2835_wdt_probe(struct platform_device *pdev) +@@ -188,7 +199,7 @@ static int bcm2835_wdt_probe(struct platform_device *pdev) + return err; + } + +- wdt->restart_handler.notifier_call = bcm2835_restart; ++ wdt->restart_handler.notifier_call = bcm2835_restart_notifier_call; + wdt->restart_handler.priority = 128; + register_restart_handler(&wdt->restart_handler); + if (pm_power_off == NULL) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1023_e642dd4e8b7d72270a285195643b357513913581.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1023_e642dd4e8b7d72270a285195643b357513913581.patch --- linux-4.9.13/debian/patches/rpi/rpi_1023_e642dd4e8b7d72270a285195643b357513913581.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1023_e642dd4e8b7d72270a285195643b357513913581.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,21 @@ +commit e642dd4e8b7d72270a285195643b357513913581 +Author: popcornmix +Date: Tue Apr 5 19:40:12 2016 +0100 + + reboot: Use power off rather than busy spinning when halt is requested + +diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c +index 3fa867a2aae6..80dca8dcd670 100644 +--- a/arch/arm/kernel/reboot.c ++++ b/arch/arm/kernel/reboot.c +@@ -102,9 +102,7 @@ void machine_shutdown(void) + */ + void machine_halt(void) + { +- local_irq_disable(); +- smp_send_stop(); +- while (1); ++ machine_power_off(); + } + + /* diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1024_cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1024_cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1024_cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1024_cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,18 @@ +commit cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f +Author: popcornmix +Date: Wed Nov 9 13:02:52 2016 +0000 + + bcm: Make RASPBERRYPI_POWER depend on PM + +diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig +index a39b0d58ddd0..e037a6dd79d1 100644 +--- a/drivers/soc/bcm/Kconfig ++++ b/drivers/soc/bcm/Kconfig +@@ -4,6 +4,7 @@ config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + depends on RASPBERRYPI_FIRMWARE=y ++ depends on PM + select PM_GENERIC_DOMAINS if PM + help + This enables support for the RPi power domains which can be enabled diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1025_d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1025_d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274.patch --- linux-4.9.13/debian/patches/rpi/rpi_1025_d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1025_d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,46 @@ +commit d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274 +Author: Martin Sperl +Date: Fri Sep 2 16:45:27 2016 +0100 + + Register the clocks early during the boot process, + so that special/critical clocks can get enabled early on + in the boot process avoiding the risk of disabling a clock, + pll_divider or pll when a claiming driver fails to install + propperly - maybe it needs to defer. + + Signed-off-by: Martin Sperl + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 7040c6426e35..21e2a538ff0d 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1903,8 +1903,15 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + if (ret) + return ret; + +- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, ++ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + &cprman->onecell); ++ if (ret) ++ return ret; ++ ++ /* note that we have registered all the clocks */ ++ dev_dbg(dev, "registered %d clocks\n", asize); ++ ++ return 0; + } + + static const struct of_device_id bcm2835_clk_of_match[] = { +@@ -1921,7 +1928,11 @@ static struct platform_driver bcm2835_clk_driver = { + .probe = bcm2835_clk_probe, + }; + +-builtin_platform_driver(bcm2835_clk_driver); ++static int __init __bcm2835_clk_driver_init(void) ++{ ++ return platform_driver_register(&bcm2835_clk_driver); ++} ++core_initcall(__bcm2835_clk_driver_init); + + MODULE_AUTHOR("Eric Anholt "); + MODULE_DESCRIPTION("BCM2835 clock driver"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1026_458e69b69a357d45a3baf8d698797da19c01a546.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1026_458e69b69a357d45a3baf8d698797da19c01a546.patch --- linux-4.9.13/debian/patches/rpi/rpi_1026_458e69b69a357d45a3baf8d698797da19c01a546.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1026_458e69b69a357d45a3baf8d698797da19c01a546.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,26 @@ +commit 458e69b69a357d45a3baf8d698797da19c01a546 +Author: popcornmix +Date: Tue Dec 6 17:05:39 2016 +0000 + + bcm2835-rng: Avoid initialising if already enabled + + Avoids the 0x40000 cycles of warmup again if firmware has already used it + +diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c +index 574211a49549..e66c0fca8c60 100644 +--- a/drivers/char/hw_random/bcm2835-rng.c ++++ b/drivers/char/hw_random/bcm2835-rng.c +@@ -102,9 +102,10 @@ static int bcm2835_rng_probe(struct platform_device *pdev) + rng_setup(rng_base); + + /* set warm-up count & enable */ +- __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); +- __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); +- ++ if (!(__raw_readl(rng_base + RNG_CTRL) & RNG_RBGEN)) { ++ __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); ++ __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); ++ } + /* register driver */ + err = hwrng_register(&bcm2835_rng_ops); + if (err) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1027_1bb431d604baa122cdc2aaee9742909c77b46690.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1027_1bb431d604baa122cdc2aaee9742909c77b46690.patch --- linux-4.9.13/debian/patches/rpi/rpi_1027_1bb431d604baa122cdc2aaee9742909c77b46690.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1027_1bb431d604baa122cdc2aaee9742909c77b46690.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,19 @@ +commit 1bb431d604baa122cdc2aaee9742909c77b46690 +Author: Phil Elwell +Date: Wed Aug 24 16:28:44 2016 +0100 + + kbuild: Ignore dtco targets when filtering symbols + +diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include +index e9c8ecea1b5a..0ad633411c19 100644 +--- a/scripts/Kbuild.include ++++ b/scripts/Kbuild.include +@@ -285,7 +285,7 @@ ksym_dep_filter = \ + $(CPP) $(call flags_nodeps,c_flags) -D__KSYM_DEPS__ $< ;; \ + as_*_S|cpp_s_S) \ + $(CPP) $(call flags_nodeps,a_flags) -D__KSYM_DEPS__ $< ;; \ +- boot*|build*|*cpp_lds_S|dtc|host*|vdso*) : ;; \ ++ boot*|build*|*cpp_lds_S|dtc*|host*|vdso*) : ;; \ + *) echo "Don't know how to preprocess $(1)" >&2; false ;; \ + esac | tr ";" "\n" | sed -rn 's/^.*=== __KSYM_(.*) ===.*$$/KSYM_\1/p' + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1028_32918e9e35fa324b227400fd4a715732e0acb055.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1028_32918e9e35fa324b227400fd4a715732e0acb055.patch --- linux-4.9.13/debian/patches/rpi/rpi_1028_32918e9e35fa324b227400fd4a715732e0acb055.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1028_32918e9e35fa324b227400fd4a715732e0acb055.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,36 @@ +commit 32918e9e35fa324b227400fd4a715732e0acb055 +Author: Robert Tiemann +Date: Mon Jul 20 11:01:25 2015 +0200 + + BCM2835_DT: Fix I2S register map + +diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +index baf9b34d20bf..11c052acf65e 100644 +--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt ++++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +@@ -74,8 +74,8 @@ Example: + + bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; +- reg = < 0x7e203000 0x20>, +- < 0x7e101098 0x02>; ++ reg = < 0x7e203000 0x24>, ++ < 0x7e101098 0x08>; + + dmas = <&dma 2>, + <&dma 3>; +diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt +index 65783de0aedf..a89fe4220fdc 100644 +--- a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt ++++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt +@@ -16,8 +16,8 @@ Example: + + bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; +- reg = <0x7e203000 0x20>, +- <0x7e101098 0x02>; ++ reg = <0x7e203000 0x24>, ++ <0x7e101098 0x08>; + + dmas = <&dma 2>, + <&dma 3>; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1029_9df5fc1517da4e328021869fea54884ae0f1fc4d.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1029_9df5fc1517da4e328021869fea54884ae0f1fc4d.patch --- linux-4.9.13/debian/patches/rpi/rpi_1029_9df5fc1517da4e328021869fea54884ae0f1fc4d.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1029_9df5fc1517da4e328021869fea54884ae0f1fc4d.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,200 @@ +commit 9df5fc1517da4e328021869fea54884ae0f1fc4d +Author: popcornmix +Date: Sun May 12 12:24:19 2013 +0100 + + Main bcm2708/bcm2709 linux port + + Signed-off-by: popcornmix + Signed-off-by: Noralf Trønnes + + bcm2709: Drop platform smp and timer init code + + irq-bcm2836 handles this through these functions: + bcm2835_init_local_timer_frequency() + bcm2836_arm_irqchip_smp_init() + + Signed-off-by: Noralf Trønnes + + bcm270x: Use watchdog for reboot/poweroff + + The watchdog driver already has support for reboot/poweroff. + Make use of this and remove the code from the platform files. + + Signed-off-by: Noralf Trønnes + +diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig +index 4ff30d5278a7..333dc3c2e5ff 100644 +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -155,6 +155,7 @@ config ARCH_BCM2835 + select FIQ + select PINCTRL + select PINCTRL_BCM2835 ++ select MFD_SYSCON if ARCH_MULTI_V7 + help + This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This SoC is used in the Raspberry Pi and Roku 2 devices. +diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c +index 8f152266ba9b..133338f0a212 100644 +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -16,17 +16,21 @@ + #include + #include + #include ++#include + #include + + #include + #include + ++#include ++ + static void __init bcm2835_init(void) + { + struct device_node *np = of_find_node_by_path("/system"); + u32 val; + u64 val64; + ++ vc_cma_early_init(); + bcm2835_init_clocks(); + + if (!of_property_read_u32(np, "linux,revision", &val)) +@@ -35,6 +39,17 @@ static void __init bcm2835_init(void) + system_serial_low = val64; + } + ++static void __init bcm2835_init_early(void) ++{ ++ /* dwc_otg needs this for bounce buffers on non-aligned transfers */ ++ init_dma_coherent_pool_size(SZ_1M); ++} ++ ++static void __init bcm2835_board_reserve(void) ++{ ++ vc_cma_reserve(); ++} ++ + static const char * const bcm2835_compat[] = { + #ifdef CONFIG_ARCH_MULTI_V6 + "brcm,bcm2835", +@@ -47,5 +62,7 @@ static const char * const bcm2835_compat[] = { + + DT_MACHINE_START(BCM2835, "BCM2835") + .init_machine = bcm2835_init, ++ .reserve = bcm2835_board_reserve, ++ .init_early = bcm2835_init_early, + .dt_compat = bcm2835_compat + MACHINE_END +diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S +index 06d890a2342b..30d96e81c0e0 100644 +--- a/arch/arm/mm/proc-v6.S ++++ b/arch/arm/mm/proc-v6.S +@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) + * + * IRQs are already disabled. + */ ++ ++/* See jira SW-5991 for details of this workaround */ + ENTRY(cpu_v6_do_idle) +- mov r1, #0 +- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode +- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ .align 5 ++ mov r1, #2 ++1: subs r1, #1 ++ nop ++ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode ++ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ nop ++ nop ++ nop ++ bne 1b + ret lr + + ENTRY(cpu_v6_dcache_clean_area) +diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c +index eccf6ed02529..8ed457fd74bd 100644 +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -54,7 +54,9 @@ + #include + + #include ++#ifndef CONFIG_ARM64 + #include ++#endif + + /* Put the bank and irq (32 bits) into the hwirq */ + #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) +@@ -82,6 +84,7 @@ + #define NR_BANKS 3 + #define IRQS_PER_BANK 32 + #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) ++#undef FIQ_START + #define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) + + static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; +@@ -256,10 +259,12 @@ static int __init armctrl_of_init(struct device_node *node, + MAKE_HWIRQ(b, i) + NUMBER_IRQS); + BUG_ON(irq <= 0); + irq_set_chip(irq, &armctrl_chip); +- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ irq_set_probe(irq); + } + } ++#ifndef CONFIG_ARM64 + init_FIQ(FIQ_START); ++#endif + + return 0; + } +diff --git a/drivers/mailbox/bcm2835-mailbox.c b/drivers/mailbox/bcm2835-mailbox.c +index cfb4b4496dd9..d9c6c217c4d6 100644 +--- a/drivers/mailbox/bcm2835-mailbox.c ++++ b/drivers/mailbox/bcm2835-mailbox.c +@@ -51,12 +51,15 @@ + #define MAIL1_WRT (ARM_0_MAIL1 + 0x00) + #define MAIL1_STA (ARM_0_MAIL1 + 0x18) + ++/* On ARCH_BCM270x these come through (arm_control.h ) */ ++#ifndef ARM_MS_FULL + /* Status register: FIFO state. */ + #define ARM_MS_FULL BIT(31) + #define ARM_MS_EMPTY BIT(30) + + /* Configuration register: Enable interrupts. */ + #define ARM_MC_IHAVEDATAIRQEN BIT(0) ++#endif + + struct bcm2835_mbox { + void __iomem *regs; +@@ -151,7 +154,7 @@ static int bcm2835_mbox_probe(struct platform_device *pdev) + return -ENOMEM; + spin_lock_init(&mbox->lock); + +- ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), + bcm2835_mbox_irq, 0, dev_name(dev), mbox); + if (ret) { + dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", +@@ -209,7 +212,18 @@ static struct platform_driver bcm2835_mbox_driver = { + .probe = bcm2835_mbox_probe, + .remove = bcm2835_mbox_remove, + }; +-module_platform_driver(bcm2835_mbox_driver); ++ ++static int __init bcm2835_mbox_init(void) ++{ ++ return platform_driver_register(&bcm2835_mbox_driver); ++} ++arch_initcall(bcm2835_mbox_init); ++ ++static void __init bcm2835_mbox_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_mbox_driver); ++} ++module_exit(bcm2835_mbox_exit); + + MODULE_AUTHOR("Lubomir Rintel "); + MODULE_DESCRIPTION("BCM2835 mailbox IPC driver"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1030_2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1030_2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1030_2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1030_2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,60924 @@ +commit 2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a +Author: popcornmix +Date: Wed May 1 19:46:17 2013 +0100 + + Add dwc_otg driver + + Signed-off-by: popcornmix + + usb: dwc: fix lockdep false positive + + Signed-off-by: Kari Suvanto + + usb: dwc: fix inconsistent lock state + + Signed-off-by: Kari Suvanto + + Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance. + Thanks to Gordon and Costas + + Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005. + + Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh + + Make sure we wait for the reset to finish + + dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel + memory corruption, escalating to OOPS under high USB load. + + dwc_otg: Fix unsafe access of QTD during URB enqueue + + In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the + transaction could complete almost immediately after the qtd was assigned + to a host channel during URB enqueue, which meant the qtd pointer was no + longer valid having been completed and removed. Usually, this resulted in + an OOPS during URB submission. By predetermining whether transactions + need to be queued or not, this unsafe pointer access is avoided. + + This bug was only evident on the Pi model A where a device was attached + that had no periodic endpoints (e.g. USB pendrive or some wlan devices). + + dwc_otg: Fix incorrect URB allocation error handling + + If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS + because for some reason a member of the *unallocated* struct was set to + zero. Error handling changed to fail correctly. + + dwc_otg: fix potential use-after-free case in interrupt handler + + If a transaction had previously aborted, certain interrupts are + enabled to track error counts and reset where necessary. On IN + endpoints the host generates an ACK interrupt near-simultaneously + with completion of transfer. In the case where this transfer had + previously had an error, this results in a use-after-free on + the QTD memory space with a 1-byte length being overwritten to + 0x00. + + dwc_otg: add handling of SPLIT transaction data toggle errors + + Previously a data toggle error on packets from a USB1.1 device behind + a TT would result in the Pi locking up as the driver never handled + the associated interrupt. Patch adds basic retry mechanism and + interrupt acknowledgement to cater for either a chance toggle error or + for devices that have a broken initial toggle state (FT8U232/FT232BM). + + dwc_otg: implement tasklet for returning URBs to usbcore hcd layer + + The dwc_otg driver interrupt handler for transfer completion will spend + a very long time with interrupts disabled when a URB is completed - + this is because usb_hcd_giveback_urb is called from within the handler + which for a USB device driver with complicated processing (e.g. webcam) + will take an exorbitant amount of time to complete. This results in + missed completion interrupts for other USB packets which lead to them + being dropped due to microframe overruns. + + This patch splits returning the URB to the usb hcd layer into a + high-priority tasklet. This will have most benefit for isochronous IN + transfers but will also have incidental benefit where multiple periodic + devices are active at once. + + dwc_otg: fix NAK holdoff and allow on split transactions only + + This corrects a bug where if a single active non-periodic endpoint + had at least one transaction in its qh, on frnum == MAX_FRNUM the qh + would get skipped and never get queued again. This would result in + a silent device until error detection (automatic or otherwise) would + either reset the device or flush and requeue the URBs. + + Additionally the NAK holdoff was enabled for all transactions - this + would potentially stall a HS endpoint for 1ms if a previous error state + enabled this interrupt and the next response was a NAK. Fix so that + only split transactions get held off. + + dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler + + usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it + asynchronously in the tasklet was not safe (regression in + c4564d4a1a0a9b10d4419e48239f5d99e88d2667). + + This change unlinks it from the endpoint prior to queueing it for handling in + the tasklet, and also adds a check to ensure the urb is OK to be unlinked + before doing so. + + NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb + when a USB device was unplugged/replugged during data transfer. This effect + was reproduced using automated USB port power control, hundreds of replug + events were performed during active transfers to confirm that the problem was + eliminated. + + USB fix using a FIQ to implement split transactions + + This commit adds a FIQ implementaion that schedules + the split transactions using a FIQ so we don't get + held off by the interrupt latency of Linux + + dwc_otg: fix device attributes and avoid kernel warnings on boot + + dcw_otg: avoid logging function that can cause panics + + See: https://github.com/raspberrypi/firmware/issues/21 + Thanks to cleverca22 for fix + + dwc_otg: mask correct interrupts after transaction error recovery + + The dwc_otg driver will unmask certain interrupts on a transaction + that previously halted in the error state in order to reset the + QTD error count. The various fine-grained interrupt handlers do not + consider that other interrupts besides themselves were unmasked. + + By disabling the two other interrupts only ever enabled in DMA mode + for this purpose, we can avoid unnecessary function calls in the + IRQ handler. This will also prevent an unneccesary FIQ interrupt + from being generated if the FIQ is enabled. + + dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ + + In the case of a transaction to a device that had previously aborted + due to an error, several interrupts are enabled to reset the error + count when a device responds. This has the side-effect of making the + FIQ thrash because the hardware will generate multiple instances of + a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK + on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the + associated interrupts. + + Additionally, on non-split transactions make sure that only unmasked + interrupts are cleared. This caused a hard-to-trigger but serious + race condition when you had the combination of an endpoint awaiting + error recovery and a transaction completed on an endpoint - due to + the sequencing and timing of interrupts generated by the dwc_otg core, + it was possible to confuse the IRQ handler. + + Fix function tracing + + dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue + + dwc_otg: prevent OOPSes during device disconnects + + The dwc_otg_urb_enqueue function is thread-unsafe. In particular the + access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and + friends does not occur within a critical section and so if a device + was unplugged during activity there was a high chance that the + usbcore hub_thread would try to disable the endpoint with partially- + formed entries in the URB queue. This would result in BUG() or null + pointer dereferences. + + Fix so that access of urb->hcpriv, enqueuing to the hardware and + adding to usbcore endpoint URB lists is contained within a single + critical section. + + dwc_otg: prevent BUG() in TT allocation if hub address is > 16 + + A fixed-size array is used to track TT allocation. This was + previously set to 16 which caused a crash because + dwc_otg_hcd_allocate_port would read past the end of the array. + + This was hit if a hub was plugged in which enumerated as addr > 16, + due to previous device resets or unplugs. + + Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows + to a large size if 128 hub addresses are supported. This field is + for debug only for tracking which frame an allocate happened in. + + dwc_otg: make channel halts with unknown state less damaging + + If the IRQ received a channel halt interrupt through the FIQ + with no other bits set, the IRQ would not release the host + channel and never complete the URB. + + Add catchall handling to treat as a transaction error and retry. + + dwc_otg: fiq_split: use TTs with more granularity + + This fixes certain issues with split transaction scheduling. + + - Isochronous multi-packet OUT transactions now hog the TT until + they are completed - this prevents hubs aborting transactions + if they get a periodic start-split out-of-order + - Don't perform TT allocation on non-periodic endpoints - this + allows simultaneous use of the TT's bulk/control and periodic + transaction buffers + + This commit will mainly affect USB audio playback. + + dwc_otg: fix potential sleep while atomic during urb enqueue + + Fixes a regression introduced with eb1b482a. Kmalloc called from + dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have + the GPF_ATOMIC flag set. Force this flag when inside the larger + critical section. + + dwc_otg: make fiq_split_enable imply fiq_fix_enable + + Failing to set up the FIQ correctly would result in + "IRQ 32: nobody cared" errors in dmesg. + + dwc_otg: prevent crashes on host port disconnects + + Fix several issues resulting in crashes or inconsistent state + if a Model A root port was disconnected. + + - Clean up queue heads properly in kill_urbs_in_qh_list by + removing the empty QHs from the schedule lists + - Set the halt status properly to prevent IRQ handlers from + using freed memory + - Add fiq_split related cleanup for saved registers + - Make microframe scheduling reclaim host channels if + active during a disconnect + - Abort URBs with -ESHUTDOWN status response, informing + device drivers so they respond in a more correct fashion + and don't try to resubmit URBs + - Prevent IRQ handlers from attempting to handle channel + interrupts if the associated URB was dequeued (and the + driver state was cleared) + + dwc_otg: prevent leaking URBs during enqueue + + A dwc_otg_urb would get leaked if the HCD enqueue function + failed for any reason. Free the URB at the appropriate points. + + dwc_otg: Enable NAK holdoff for control split transactions + + Certain low-speed devices take a very long time to complete a + data or status stage of a control transaction, producing NAK + responses until they complete internal processing - the USB2.0 + spec limit is up to 500mS. This causes the same type of interrupt + storm as seen with USB-serial dongles prior to c8edb238. + + In certain circumstances, usually while booting, this interrupt + storm could cause SD card timeouts. + + dwc_otg: Fix for occasional lockup on boot when doing a USB reset + + dwc_otg: Don't issue traffic to LS devices in FS mode + + Issuing low-speed packets when the root port is in full-speed mode + causes the root port to stop responding. Explicitly fail when + enqueuing URBs to a LS endpoint on a FS bus. + + Fix ARM architecture issue with local_irq_restore() + + If local_fiq_enable() is called before a local_irq_restore(flags) where + the flags variable has the F bit set, the FIQ will be erroneously disabled. + + Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. + + Also fix some of the hacks previously implemented for previous dwc_otg + incarnations. + + dwc_otg: fiq_fsm: Base commit for driver rewrite + + This commit removes the previous FIQ fixes entirely and adds fiq_fsm. + + This rewrite features much more complete support for split transactions + and takes into account several OTG hardware bugs. High-speed + isochronous transactions are also capable of being performed by fiq_fsm. + + All driver options have been removed and replaced with: + - dwc_otg.fiq_enable (bool) + - dwc_otg.fiq_fsm_enable (bool) + - dwc_otg.fiq_fsm_mask (bitmask) + - dwc_otg.nak_holdoff (unsigned int) + + Defaults are specified such that fiq_fsm behaves similarly to the + previously implemented FIQ fixes. + + fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used + + If the transfer associated with a QTD failed due to a bus error, the HCD + would retry the transfer up to 3 times (implementing the USB2.0 + three-strikes retry in software). + + Due to the masking mechanism used by fiq_fsm, it is only possible to pass + a single interrupt through to the HCD per-transfer. + + In this instance host channels would fall off the radar because the error + reset would function, but the subsequent channel halt would be lost. + + Push the error count reset into the FIQ handler. + + fiq_fsm: Implement timeout mechanism + + For full-speed endpoints with a large packet size, interrupt latency + runs the risk of the FIQ starting a transaction too late in a full-speed + frame. If the device is still transmitting data when EOF2 for the + downstream frame occurs, the hub will disable the port. This change is + not reflected in the hub status endpoint and the device becomes + unresponsive. + + Prevent high-bandwidth transactions from being started too late in a + frame. The mechanism is not guaranteed: a combination of bit stuffing + and hub latency may still result in a device overrunning. + + fiq_fsm: fix bounce buffer utilisation for Isochronous OUT + + Multi-packet isochronous OUT transactions were subject to a few bounday + bugs. Fix them. + + Audio playback is now much more robust: however, an issue stands with + devices that have adaptive sinks - ALSA plays samples too fast. + + dwc_otg: Return full-speed frame numbers in HS mode + + The frame counter increments on every *microframe* in high-speed mode. + Most device drivers expect this number to be in full-speed frames - this + caused considerable confusion to e.g. snd_usb_audio which uses the + frame counter to estimate the number of samples played. + + fiq_fsm: save PID on completion of interrupt OUT transfers + + Also add edge case handling for interrupt transports. + + Note that for periodic split IN, data toggles are unimplemented in the + OTG host hardware - it unconditionally accepts any PID. + + fiq_fsm: add missing case for fiq_fsm_tt_in_use() + + Certain combinations of bitrate and endpoint activity could + result in a periodic transaction erroneously getting started + while the previous Isochronous OUT was still active. + + fiq_fsm: clear hcintmsk for aborted transactions + + Prevents the FIQ from erroneously handling interrupts + on a timed out channel. + + fiq_fsm: enable by default + + fiq_fsm: fix dequeues for non-periodic split transactions + + If a dequeue happened between the SSPLIT and CSPLIT phases of the + transaction, the HCD would never receive an interrupt. + + fiq_fsm: Disable by default + + fiq_fsm: Handle HC babble errors + + The HCTSIZ transfer size field raises a babble interrupt if + the counter wraps. Handle the resulting interrupt in this case. + + dwc_otg: fix interrupt registration for fiq_enable=0 + + Additionally make the module parameter conditional for wherever + hcd->fiq_state is touched. + + fiq_fsm: Enable by default + + dwc_otg: Fix various issues with root port and transaction errors + + Process the host port interrupts correctly (and don't trample them). + Root port hotplug now functional again. + + Fix a few thinkos with the transaction error passthrough for fiq_fsm. + + fiq_fsm: Implement hack for Split Interrupt transactions + + Hubs aren't too picky about which endpoint we send Control type split + transactions to. By treating Interrupt transfers as Control, it is + possible to use the non-periodic queue in the OTG core as well as the + non-periodic FIFOs in the hub itself. This massively reduces the + microframe exclusivity/contention that periodic split transactions + otherwise have to enforce. + + It goes without saying that this is a fairly egregious USB specification + violation, but it works. + + Original idea by Hans Petter Selasky @ FreeBSD.org. + + dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only. + + dwc_otg: introduce fiq_fsm_spin(un|)lock() + + SMP safety for the FIQ relies on register read-modify write cycles being + completed in the correct order. Several places in the DWC code modify + registers also touched by the FIQ. Protect these by a bare-bones lock + mechanism. + + This also makes it possible to run the FIQ and IRQ handlers on different + cores. + + fiq_fsm: fix build on bcm2708 and bcm2709 platforms + + dwc_otg: put some barriers back where they should be for UP + + bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active + + dwc_otg: fixup read-modify-write in critical paths + + Be more careful about read-modify-write on registers that the FIQ + also touches. + + Guard fiq_fsm_spin_lock with fiq_enable check + + fiq_fsm: Falling out of the state machine isn't fatal + + This edge case can be hit if the port is disabled while the FIQ is + in the middle of a transaction. Make the effects less severe. + + Also get rid of the useless return value. + + squash: dwc_otg: Allow to build without SMP + + usb: core: make overcurrent messages more prominent + + Hub overcurrent messages are more serious than "debug". Increase loglevel. + + usb: dwc_otg: Don't use dma_to_virt() + + Commit 6ce0d20 changes dma_to_virt() which breaks this driver. + Open code the old dma_to_virt() implementation to work around this. + + Limit the use of __bus_to_virt() to cases where transfer_buffer_length + is set and transfer_buffer is not set. This is done to increase the + chance that this driver will also work on ARCH_BCM2835. + + transfer_buffer should not be NULL if the length is set, but the + comment in the code indicates that there are situations where this + might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar + comment pointing to a possible: 'usb storage / SCSI bug'. + + Signed-off-by: Noralf Trønnes + + dwc_otg: Fix crash when fiq_enable=0 + + dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly + + Certain low-bandwidth high-speed USB devices (specialist audio devices, + compressed-frame webcams) have packet intervals > 1 microframe. + + Stride these transfers in the FIQ by using the start-of-frame interrupt + to restart the channel at the right time. + + dwc_otg: Force host mode to fix incorrect compute module boards + + dwc_otg: Add ARCH_BCM2835 support + + Signed-off-by: Noralf Trønnes + + dwc_otg: Simplify FIQ irq number code + + Dropping ATAGS means we can simplify the FIQ irq number code. + Also add error checking on the returned irq number. + + Signed-off-by: Noralf Trønnes + + dwc_otg: Remove duplicate gadget probe/unregister function + + dwc_otg: Properly set the HFIR + + Douglas Anderson reported: + + According to the most up to date version of the dwc2 databook, the FRINT + field of the HFIR register should be programmed to: + * 125 us * (PHY clock freq for HS) - 1 + * 1000 us * (PHY clock freq for FS/LS) - 1 + + This is opposed to older versions of the doc that claimed it should be: + * 125 us * (PHY clock freq for HS) + * 1000 us * (PHY clock freq for FS/LS) + + and reported lower timing jitter on a USB analyser + + dcw_otg: trim xfer length when buffer larger than allocated size is received + + dwc_otg: Don't free qh align buffers in atomic context + + dwc_otg: Enable the hack for Split Interrupt transactions by default + + dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues. + So far we are aware of many success stories but no failure caused by this setting. + Make it a default to learn more. + + See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 + + Signed-off-by: popcornmix + + dwc_otg: Use kzalloc when suitable + + dwc_otg: Pass struct device to dma_alloc*() + + This makes it possible to get the bus address from Device Tree. + + Signed-off-by: Noralf Trønnes + +diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h +index e6b70d9d084e..a48ccf7c73d8 100644 +--- a/arch/arm/include/asm/irqflags.h ++++ b/arch/arm/include/asm/irqflags.h +@@ -162,13 +162,23 @@ static inline unsigned long arch_local_save_flags(void) + } + + /* +- * restore saved IRQ & FIQ state ++ * restore saved IRQ state + */ + #define arch_local_irq_restore arch_local_irq_restore + static inline void arch_local_irq_restore(unsigned long flags) + { +- asm volatile( +- " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore" ++ unsigned long temp = 0; ++ flags &= ~(1 << 6); ++ asm volatile ( ++ " mrs %0, cpsr" ++ : "=r" (temp) ++ : ++ : "memory", "cc"); ++ /* Preserve FIQ bit */ ++ temp &= (1 << 6); ++ flags = flags | temp; ++ asm volatile ( ++ " msr cpsr_c, %0 @ local_irq_restore" + : + : "r" (flags) + : "memory", "cc"); +diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S +index 8dd26e1a9bd6..eef484756af2 100644 +--- a/arch/arm/kernel/fiqasm.S ++++ b/arch/arm/kernel/fiqasm.S +@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs) + mov r0, r0 @ avoid hazard prior to ARMv4 + ret lr + ENDPROC(__get_fiq_regs) ++ ++ENTRY(__FIQ_Branch) ++ mov pc, r8 ++ENDPROC(__FIQ_Branch) +diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile +index dca78565eb55..5c467de6914e 100644 +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -7,6 +7,7 @@ + obj-$(CONFIG_USB) += core/ + obj-$(CONFIG_USB_SUPPORT) += phy/ + ++obj-$(CONFIG_USB_DWCOTG) += host/ + obj-$(CONFIG_USB_DWC3) += dwc3/ + obj-$(CONFIG_USB_DWC2) += dwc2/ + obj-$(CONFIG_USB_ISP1760) += isp1760/ +diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c +index 358ca8dd784f..abaac7c7142d 100644 +--- a/drivers/usb/core/generic.c ++++ b/drivers/usb/core/generic.c +@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_device *udev) + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); ++ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); + } + return i; + } +diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c +index aef81a16e2c8..4197a5b5fb7a 100644 +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -5009,7 +5009,7 @@ static void port_event(struct usb_hub *hub, int port1) + if (portchange & USB_PORT_STAT_C_OVERCURRENT) { + u16 status = 0, unused; + +- dev_dbg(&port_dev->dev, "over-current change\n"); ++ dev_notice(&port_dev->dev, "over-current change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_OVER_CURRENT); + msleep(100); /* Cool down */ +diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c +index 3a4707746157..85b7ff6f24b8 100644 +--- a/drivers/usb/core/message.c ++++ b/drivers/usb/core/message.c +@@ -1908,6 +1908,85 @@ int usb_set_configuration(struct usb_device *dev, int configuration) + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + cp->string = usb_cache_string(dev, cp->desc.iConfiguration); ++/* Uncomment this define to enable the HS Electrical Test support */ ++#define DWC_HS_ELECT_TST 1 ++#ifdef DWC_HS_ELECT_TST ++ /* Here we implement the HS Electrical Test support. The ++ * tester uses a vendor ID of 0x1A0A to indicate we should ++ * run a special test sequence. The product ID tells us ++ * which sequence to run. We invoke the test sequence by ++ * sending a non-standard SetFeature command to our root ++ * hub port. Our dwc_otg_hcd_hub_control() routine will ++ * recognize the command and perform the desired test ++ * sequence. ++ */ ++ if (dev->descriptor.idVendor == 0x1A0A) { ++ /* HSOTG Electrical Test */ ++ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); ++ ++ if (dev->bus && dev->bus->root_hub) { ++ struct usb_device *hdev = dev->bus->root_hub; ++ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); ++ ++ switch (dev->descriptor.idProduct) { ++ case 0x0101: /* TEST_SE0_NAK */ ++ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); ++ break; ++ ++ case 0x0102: /* TEST_J */ ++ dev_warn(&dev->dev, "TEST_J\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); ++ break; ++ ++ case 0x0103: /* TEST_K */ ++ dev_warn(&dev->dev, "TEST_K\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); ++ break; ++ ++ case 0x0104: /* TEST_PACKET */ ++ dev_warn(&dev->dev, "TEST_PACKET\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); ++ break; ++ ++ case 0x0105: /* TEST_FORCE_ENABLE */ ++ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); ++ break; ++ ++ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ ++ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); ++ } ++ } ++ } ++#endif /* DWC_HS_ELECT_TST */ + + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); +diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h +index 085049d37d7a..63a461a21cc1 100644 +--- a/drivers/usb/core/otg_whitelist.h ++++ b/drivers/usb/core/otg_whitelist.h +@@ -19,33 +19,82 @@ + static struct usb_device_id whitelist_table[] = { + + /* hubs are optional in OTG, but very handy ... */ ++#define CERT_WITHOUT_HUBS ++#if defined(CERT_WITHOUT_HUBS) ++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ ++#else + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, ++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, ++#endif + + #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ + /* FIXME actually, printers are NOT supposed to use device classes; + * they're supposed to use interface classes... + */ +-{ USB_DEVICE_INFO(7, 1, 1) }, +-{ USB_DEVICE_INFO(7, 1, 2) }, +-{ USB_DEVICE_INFO(7, 1, 3) }, ++//{ USB_DEVICE_INFO(7, 1, 1) }, ++//{ USB_DEVICE_INFO(7, 1, 2) }, ++//{ USB_DEVICE_INFO(7, 1, 3) }, + #endif + + #ifdef CONFIG_USB_NET_CDCETHER + /* Linux-USB CDC Ethernet gadget */ +-{ USB_DEVICE(0x0525, 0xa4a1), }, ++//{ USB_DEVICE(0x0525, 0xa4a1), }, + /* Linux-USB CDC Ethernet + RNDIS gadget */ +-{ USB_DEVICE(0x0525, 0xa4a2), }, ++//{ USB_DEVICE(0x0525, 0xa4a2), }, + #endif + + #if IS_ENABLED(CONFIG_USB_TEST) + /* gadget zero, for testing */ +-{ USB_DEVICE(0x0525, 0xa4a0), }, ++//{ USB_DEVICE(0x0525, 0xa4a0), }, + #endif + ++/* OPT Tester */ ++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ ++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ ++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ ++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ ++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ ++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ ++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ ++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ ++ ++/* Sony cameras */ ++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, ++ ++/* Memory Devices */ ++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ ++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ ++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ ++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ ++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ ++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ ++ ++/* HP Printers */ ++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ ++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ ++ ++/* Speakers */ ++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ ++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ ++ + { } /* Terminating entry */ + }; + ++static inline void report_errors(struct usb_device *dev) ++{ ++ /* OTG MESSAGE: report errors here, customize to match your product */ ++ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", ++ le16_to_cpu(dev->descriptor.idVendor), ++ le16_to_cpu(dev->descriptor.idProduct)); ++ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ ++ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); ++ } else { ++ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); ++ } ++} ++ ++ + static int is_targeted(struct usb_device *dev) + { + struct usb_device_id *id = whitelist_table; +@@ -95,16 +144,57 @@ static int is_targeted(struct usb_device *dev) + continue; + + return 1; +- } ++ /* NOTE: can't use usb_match_id() since interface caches ++ * aren't set up yet. this is cut/paste from that code. ++ */ ++ for (id = whitelist_table; id->match_flags; id++) { ++#ifdef DEBUG ++ dev_dbg(&dev->dev, ++ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ id->idVendor, ++ id->idProduct, ++ id->bDeviceClass, ++ id->bDeviceSubClass, ++ id->bDeviceProtocol); ++#endif + +- /* add other match criteria here ... */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && ++ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) ++ continue; + ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && ++ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) ++ continue; + +- /* OTG MESSAGE: report errors here, customize to match your product */ +- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", +- le16_to_cpu(dev->descriptor.idVendor), +- le16_to_cpu(dev->descriptor.idProduct)); ++ /* No need to test id->bcdDevice_lo != 0, since 0 is never ++ greater than any unsigned number. */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && ++ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && ++ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && ++ (id->bDeviceClass != dev->descriptor.bDeviceClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && ++ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && ++ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) ++ continue; ++ ++ return 1; ++ } ++ } ++ ++ /* add other match criteria here ... */ + ++ report_errors(dev); + return 0; + } + +diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c +new file mode 100644 +index 000000000000..a896d73f7a93 +--- /dev/null ++++ b/drivers/usb/gadget/file_storage.c +@@ -0,0 +1,3676 @@ ++/* ++ * file_storage.c -- File-backed USB Storage Gadget, for USB development ++ * ++ * Copyright (C) 2003-2008 Alan Stern ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * The File-backed Storage Gadget acts as a USB Mass Storage device, ++ * appearing to the host as a disk drive or as a CD-ROM drive. In addition ++ * to providing an example of a genuinely useful gadget driver for a USB ++ * device, it also illustrates a technique of double-buffering for increased ++ * throughput. Last but not least, it gives an easy way to probe the ++ * behavior of the Mass Storage drivers in a USB host. ++ * ++ * Backing storage is provided by a regular file or a block device, specified ++ * by the "file" module parameter. Access can be limited to read-only by ++ * setting the optional "ro" module parameter. (For CD-ROM emulation, ++ * access is always read-only.) The gadget will indicate that it has ++ * removable media if the optional "removable" module parameter is set. ++ * ++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), ++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected ++ * by the optional "transport" module parameter. It also supports the ++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), ++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by ++ * the optional "protocol" module parameter. In addition, the default ++ * Vendor ID, Product ID, release number and serial number can be overridden. ++ * ++ * There is support for multiple logical units (LUNs), each of which has ++ * its own backing file. The number of LUNs can be set using the optional ++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding ++ * files are specified using comma-separated lists for "file" and "ro". ++ * The default number of LUNs is taken from the number of "file" elements; ++ * it is 1 if "file" is not given. If "removable" is not set then a backing ++ * file must be specified for each LUN. If it is set, then an unspecified ++ * or empty backing filename means the LUN's medium is not loaded. Ideally ++ * each LUN would be settable independently as a disk drive or a CD-ROM ++ * drive, but currently all LUNs have to be the same type. The CD-ROM ++ * emulation includes a single data track and no audio tracks; hence there ++ * need be only one backing file per LUN. ++ * ++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are ++ * needed (an interrupt-out endpoint is also needed for CBI). The memory ++ * requirement amounts to two 16K buffers, size configurable by a parameter. ++ * Support is included for both full-speed and high-speed operation. ++ * ++ * Note that the driver is slightly non-portable in that it assumes a ++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and ++ * interrupt-in endpoints. With most device controllers this isn't an ++ * issue, but there may be some with hardware restrictions that prevent ++ * a buffer from being used by more than one endpoint. ++ * ++ * Module options: ++ * ++ * file=filename[,filename...] ++ * Required if "removable" is not set, names of ++ * the files or block devices used for ++ * backing storage ++ * serial=HHHH... Required serial number (string of hex chars) ++ * ro=b[,b...] Default false, booleans for read-only access ++ * removable Default false, boolean for removable media ++ * luns=N Default N = number of filenames, number of ++ * LUNs to support ++ * nofua=b[,b...] Default false, booleans for ignore FUA flag ++ * in SCSI WRITE(10,12) commands ++ * stall Default determined according to the type of ++ * USB device controller (usually true), ++ * boolean to permit the driver to halt ++ * bulk endpoints ++ * cdrom Default false, boolean for whether to emulate ++ * a CD-ROM drive ++ * transport=XXX Default BBB, transport name (CB, CBI, or BBB) ++ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or ++ * ATAPI, QIC, UFI, 8070, or SCSI; ++ * also 1 - 6) ++ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID ++ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID ++ * release=0xRRRR Override the USB release number (bcdDevice) ++ * buflen=N Default N=16384, buffer size used (will be ++ * rounded down to a multiple of ++ * PAGE_CACHE_SIZE) ++ * ++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", ++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available; ++ * default values are used for everything else. ++ * ++ * The pathnames of the backing files and the ro settings are available in ++ * the attribute files "file", "nofua", and "ro" in the lun subdirectory of ++ * the gadget's sysfs directory. If the "removable" option is set, writing to ++ * these files will simulate ejecting/loading the medium (writing an empty ++ * line means eject) and adjusting a write-enable tab. Changes to the ro ++ * setting are not allowed when the medium is loaded or if CD-ROM emulation ++ * is being used. ++ * ++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell. ++ * The driver's SCSI command interface was based on the "Information ++ * technology - Small Computer System Interface - 2" document from ++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at ++ * . The single exception ++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the ++ * "Universal Serial Bus Mass Storage Class UFI Command Specification" ++ * document, Revision 1.0, December 14, 1998, available at ++ * . ++ */ ++ ++ ++/* ++ * Driver Design ++ * ++ * The FSG driver is fairly straightforward. There is a main kernel ++ * thread that handles most of the work. Interrupt routines field ++ * callbacks from the controller driver: bulk- and interrupt-request ++ * completion notifications, endpoint-0 events, and disconnect events. ++ * Completion events are passed to the main thread by wakeup calls. Many ++ * ep0 requests are handled at interrupt time, but SetInterface, ++ * SetConfiguration, and device reset requests are forwarded to the ++ * thread in the form of "exceptions" using SIGUSR1 signals (since they ++ * should interrupt any ongoing file I/O operations). ++ * ++ * The thread's main routine implements the standard command/data/status ++ * parts of a SCSI interaction. It and its subroutines are full of tests ++ * for pending signals/exceptions -- all this polling is necessary since ++ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an ++ * indication that the driver really wants to be running in userspace.) ++ * An important point is that so long as the thread is alive it keeps an ++ * open reference to the backing file. This will prevent unmounting ++ * the backing file's underlying filesystem and could cause problems ++ * during system shutdown, for example. To prevent such problems, the ++ * thread catches INT, TERM, and KILL signals and converts them into ++ * an EXIT exception. ++ * ++ * In normal operation the main thread is started during the gadget's ++ * fsg_bind() callback and stopped during fsg_unbind(). But it can also ++ * exit when it receives a signal, and there's no point leaving the ++ * gadget running when the thread is dead. So just before the thread ++ * exits, it deregisters the gadget driver. This makes things a little ++ * tricky: The driver is deregistered at two places, and the exiting ++ * thread can indirectly call fsg_unbind() which in turn can tell the ++ * thread to exit. The first problem is resolved through the use of the ++ * REGISTERED atomic bitflag; the driver will only be deregistered once. ++ * The second problem is resolved by having fsg_unbind() check ++ * fsg->state; it won't try to stop the thread if the state is already ++ * FSG_STATE_TERMINATED. ++ * ++ * To provide maximum throughput, the driver uses a circular pipeline of ++ * buffer heads (struct fsg_buffhd). In principle the pipeline can be ++ * arbitrarily long; in practice the benefits don't justify having more ++ * than 2 stages (i.e., double buffering). But it helps to think of the ++ * pipeline as being a long one. Each buffer head contains a bulk-in and ++ * a bulk-out request pointer (since the buffer can be used for both ++ * output and input -- directions always are given from the host's ++ * point of view) as well as a pointer to the buffer and various state ++ * variables. ++ * ++ * Use of the pipeline follows a simple protocol. There is a variable ++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. ++ * At any time that buffer head may still be in use from an earlier ++ * request, so each buffer head has a state variable indicating whether ++ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the ++ * buffer head to be EMPTY, filling the buffer either by file I/O or by ++ * USB I/O (during which the buffer head is BUSY), and marking the buffer ++ * head FULL when the I/O is complete. Then the buffer will be emptied ++ * (again possibly by USB I/O, during which it is marked BUSY) and ++ * finally marked EMPTY again (possibly by a completion routine). ++ * ++ * A module parameter tells the driver to avoid stalling the bulk ++ * endpoints wherever the transport specification allows. This is ++ * necessary for some UDCs like the SuperH, which cannot reliably clear a ++ * halt on a bulk endpoint. However, under certain circumstances the ++ * Bulk-only specification requires a stall. In such cases the driver ++ * will halt the endpoint and set a flag indicating that it should clear ++ * the halt in software during the next device reset. Hopefully this ++ * will permit everything to work correctly. Furthermore, although the ++ * specification allows the bulk-out endpoint to halt when the host sends ++ * too much data, implementing this would cause an unavoidable race. ++ * The driver will always use the "no-stall" approach for OUT transfers. ++ * ++ * One subtle point concerns sending status-stage responses for ep0 ++ * requests. Some of these requests, such as device reset, can involve ++ * interrupting an ongoing file I/O operation, which might take an ++ * arbitrarily long time. During that delay the host might give up on ++ * the original ep0 request and issue a new one. When that happens the ++ * driver should not notify the host about completion of the original ++ * request, as the host will no longer be waiting for it. So the driver ++ * assigns to each ep0 request a unique tag, and it keeps track of the ++ * tag value of the request associated with a long-running exception ++ * (device-reset, interface-change, or configuration-change). When the ++ * exception handler is finished, the status-stage response is submitted ++ * only if the current ep0 request tag is equal to the exception request ++ * tag. Thus only the most recently received ep0 request will get a ++ * status-stage response. ++ * ++ * Warning: This driver source file is too long. It ought to be split up ++ * into a header file plus about 3 separate .c files, to handle the details ++ * of the Gadget, USB Mass Storage, and SCSI protocols. ++ */ ++ ++ ++/* #define VERBOSE_DEBUG */ ++/* #define DUMP_MSGS */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "gadget_chips.h" ++ ++ ++ ++/* ++ * Kbuild is not very cooperative with respect to linking separately ++ * compiled library objects into one module. So for now we won't use ++ * separate compilation ... ensuring init/exit sections work to shrink ++ * the runtime footprint, and giving us at least some parts of what ++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. ++ */ ++#include "usbstring.c" ++#include "config.c" ++#include "epautoconf.c" ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_DESC "File-backed Storage Gadget" ++#define DRIVER_NAME "g_file_storage" ++#define DRIVER_VERSION "1 September 2010" ++ ++static char fsg_string_manufacturer[64]; ++static const char fsg_string_product[] = DRIVER_DESC; ++static const char fsg_string_config[] = "Self-powered"; ++static const char fsg_string_interface[] = "Mass Storage"; ++ ++ ++#include "storage_common.c" ++ ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR("Alan Stern"); ++MODULE_LICENSE("Dual BSD/GPL"); ++ ++/* ++ * This driver assumes self-powered hardware and has no way for users to ++ * trigger remote wakeup. It uses autoconfiguration to select endpoints ++ * and endpoint addresses. ++ */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* Encapsulate the module parameter settings */ ++ ++static struct { ++ char *file[FSG_MAX_LUNS]; ++ char *serial; ++ bool ro[FSG_MAX_LUNS]; ++ bool nofua[FSG_MAX_LUNS]; ++ unsigned int num_filenames; ++ unsigned int num_ros; ++ unsigned int num_nofuas; ++ unsigned int nluns; ++ ++ bool removable; ++ bool can_stall; ++ bool cdrom; ++ ++ char *transport_parm; ++ char *protocol_parm; ++ unsigned short vendor; ++ unsigned short product; ++ unsigned short release; ++ unsigned int buflen; ++ ++ int transport_type; ++ char *transport_name; ++ int protocol_type; ++ char *protocol_name; ++ ++} mod_data = { // Default values ++ .transport_parm = "BBB", ++ .protocol_parm = "SCSI", ++ .removable = 0, ++ .can_stall = 1, ++ .cdrom = 0, ++ .vendor = FSG_VENDOR_ID, ++ .product = FSG_PRODUCT_ID, ++ .release = 0xffff, // Use controller chip type ++ .buflen = 16384, ++ }; ++ ++ ++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, ++ S_IRUGO); ++MODULE_PARM_DESC(file, "names of backing files or devices"); ++ ++module_param_named(serial, mod_data.serial, charp, S_IRUGO); ++MODULE_PARM_DESC(serial, "USB serial number"); ++ ++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); ++MODULE_PARM_DESC(ro, "true to force read-only"); ++ ++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, ++ S_IRUGO); ++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); ++ ++module_param_named(luns, mod_data.nluns, uint, S_IRUGO); ++MODULE_PARM_DESC(luns, "number of LUNs"); ++ ++module_param_named(removable, mod_data.removable, bool, S_IRUGO); ++MODULE_PARM_DESC(removable, "true to simulate removable media"); ++ ++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); ++MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); ++ ++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); ++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); ++ ++/* In the non-TEST version, only the module parameters listed above ++ * are available. */ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); ++ ++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " ++ "8070, or SCSI)"); ++ ++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); ++MODULE_PARM_DESC(vendor, "USB Vendor ID"); ++ ++module_param_named(product, mod_data.product, ushort, S_IRUGO); ++MODULE_PARM_DESC(product, "USB Product ID"); ++ ++module_param_named(release, mod_data.release, ushort, S_IRUGO); ++MODULE_PARM_DESC(release, "USB release number"); ++ ++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); ++MODULE_PARM_DESC(buflen, "I/O buffer size"); ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/* ++ * These definitions will permit the compiler to avoid generating code for ++ * parts of the driver that aren't used in the non-TEST version. Even gcc ++ * can recognize when a test of a constant expression yields a dead code ++ * path. ++ */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) ++#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) ++#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) ++ ++#else ++ ++#define transport_is_bbb() 1 ++#define transport_is_cbi() 0 ++#define protocol_is_scsi() 1 ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++struct fsg_dev { ++ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ ++ /* filesem protects: backing files in use */ ++ struct rw_semaphore filesem; ++ ++ /* reference counting: wait until all LUNs are released */ ++ struct kref ref; ++ ++ struct usb_ep *ep0; // Handy copy of gadget->ep0 ++ struct usb_request *ep0req; // For control responses ++ unsigned int ep0_req_tag; ++ const char *ep0req_name; ++ ++ struct usb_request *intreq; // For interrupt responses ++ int intreq_busy; ++ struct fsg_buffhd *intr_buffhd; ++ ++ unsigned int bulk_out_maxpacket; ++ enum fsg_state state; // For exception handling ++ unsigned int exception_req_tag; ++ ++ u8 config, new_config; ++ ++ unsigned int running : 1; ++ unsigned int bulk_in_enabled : 1; ++ unsigned int bulk_out_enabled : 1; ++ unsigned int intr_in_enabled : 1; ++ unsigned int phase_error : 1; ++ unsigned int short_packet_received : 1; ++ unsigned int bad_lun_okay : 1; ++ ++ unsigned long atomic_bitflags; ++#define REGISTERED 0 ++#define IGNORE_BULK_OUT 1 ++#define SUSPENDED 2 ++ ++ struct usb_ep *bulk_in; ++ struct usb_ep *bulk_out; ++ struct usb_ep *intr_in; ++ ++ struct fsg_buffhd *next_buffhd_to_fill; ++ struct fsg_buffhd *next_buffhd_to_drain; ++ ++ int thread_wakeup_needed; ++ struct completion thread_notifier; ++ struct task_struct *thread_task; ++ ++ int cmnd_size; ++ u8 cmnd[MAX_COMMAND_SIZE]; ++ enum data_direction data_dir; ++ u32 data_size; ++ u32 data_size_from_cmnd; ++ u32 tag; ++ unsigned int lun; ++ u32 residue; ++ u32 usb_amount_left; ++ ++ /* The CB protocol offers no way for a host to know when a command ++ * has completed. As a result the next command may arrive early, ++ * and we will still have to handle it. For that reason we need ++ * a buffer to store new commands when using CB (or CBI, which ++ * does not oblige a host to wait for command completion either). */ ++ int cbbuf_cmnd_size; ++ u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; ++ ++ unsigned int nluns; ++ struct fsg_lun *luns; ++ struct fsg_lun *curlun; ++ /* Must be the last entry */ ++ struct fsg_buffhd buffhds[]; ++}; ++ ++typedef void (*fsg_routine_t)(struct fsg_dev *); ++ ++static int exception_in_progress(struct fsg_dev *fsg) ++{ ++ return (fsg->state > FSG_STATE_IDLE); ++} ++ ++/* Make bulk-out requests be divisible by the maxpacket size */ ++static void set_bulk_out_req_length(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh, unsigned int length) ++{ ++ unsigned int rem; ++ ++ bh->bulk_out_intended_length = length; ++ rem = length % fsg->bulk_out_maxpacket; ++ if (rem > 0) ++ length += fsg->bulk_out_maxpacket - rem; ++ bh->outreq->length = length; ++} ++ ++static struct fsg_dev *the_fsg; ++static struct usb_gadget_driver fsg_driver; ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) ++{ ++ const char *name; ++ ++ if (ep == fsg->bulk_in) ++ name = "bulk-in"; ++ else if (ep == fsg->bulk_out) ++ name = "bulk-out"; ++ else ++ name = ep->name; ++ DBG(fsg, "%s set halt\n", name); ++ return usb_ep_set_halt(ep); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) configuration ++ * descriptors are built on demand. Also the (static) config and interface ++ * descriptors are adjusted during fsg_bind(). ++ */ ++ ++/* There is only one configuration. */ ++#define CONFIG_VALUE 1 ++ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ /* The next three values can be overridden by module parameters */ ++ .idVendor = cpu_to_le16(FSG_VENDOR_ID), ++ .idProduct = cpu_to_le16(FSG_PRODUCT_ID), ++ .bcdDevice = cpu_to_le16(0xffff), ++ ++ .iManufacturer = FSG_STRING_MANUFACTURER, ++ .iProduct = FSG_STRING_PRODUCT, ++ .iSerialNumber = FSG_STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++config_desc = { ++ .bLength = sizeof config_desc, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* wTotalLength computed by usb_gadget_config_buf() */ ++ .bNumInterfaces = 1, ++ .bConfigurationValue = CONFIG_VALUE, ++ .iConfiguration = FSG_STRING_CONFIG, ++ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, ++ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, ++}; ++ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ .bNumConfigurations = 1, ++}; ++ ++static int populate_bos(struct fsg_dev *fsg, u8 *buf) ++{ ++ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); ++ buf += USB_DT_BOS_SIZE; ++ ++ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); ++ buf += USB_DT_USB_EXT_CAP_SIZE; ++ ++ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); ++ ++ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE ++ + USB_DT_USB_EXT_CAP_SIZE; ++} ++ ++/* ++ * Config descriptors must agree with the code that sets configurations ++ * and with code managing interfaces and their altsettings. They must ++ * also handle different speeds and other-speed requests. ++ */ ++static int populate_config_buf(struct usb_gadget *gadget, ++ u8 *buf, u8 type, unsigned index) ++{ ++ enum usb_device_speed speed = gadget->speed; ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ if (index > 0) ++ return -EINVAL; ++ ++ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) ++ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; ++ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH ++ ? (const struct usb_descriptor_header **)fsg_hs_function ++ : (const struct usb_descriptor_header **)fsg_fs_function; ++ ++ /* for now, don't advertise srp-only devices */ ++ if (!gadget_is_otg(gadget)) ++ function++; ++ ++ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* These routines may be called in process context or in_irq */ ++ ++/* Caller must hold fsg->lock */ ++static void wakeup_thread(struct fsg_dev *fsg) ++{ ++ /* Tell the main thread that something has happened */ ++ fsg->thread_wakeup_needed = 1; ++ if (fsg->thread_task) ++ wake_up_process(fsg->thread_task); ++} ++ ++ ++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) ++{ ++ unsigned long flags; ++ ++ /* Do nothing if a higher-priority exception is already in progress. ++ * If a lower-or-equal priority exception is in progress, preempt it ++ * and notify the main thread by sending it a signal. */ ++ spin_lock_irqsave(&fsg->lock, flags); ++ if (fsg->state <= new_state) { ++ fsg->exception_req_tag = fsg->ep0_req_tag; ++ fsg->state = new_state; ++ if (fsg->thread_task) ++ send_sig_info(SIGUSR1, SEND_SIG_FORCED, ++ fsg->thread_task); ++ } ++ spin_unlock_irqrestore(&fsg->lock, flags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* The disconnect callback and ep0 routines. These always run in_irq, ++ * except that ep0_queue() is called in the main thread to acknowledge ++ * completion of various requests: set config, set interface, and ++ * Bulk-only device reset. */ ++ ++static void fsg_disconnect(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "disconnect or port reset\n"); ++ raise_exception(fsg, FSG_STATE_DISCONNECT); ++} ++ ++ ++static int ep0_queue(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); ++ if (rc != 0 && rc != -ESHUTDOWN) { ++ ++ /* We can't do much more than wait for a reset */ ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ fsg->ep0->name, rc); ++ } ++ return rc; ++} ++ ++static void ep0_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ ++ if (req->actual > 0) ++ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ if (req->status == 0 && req->context) ++ ((fsg_routine_t) (req->context))(fsg); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Bulk and interrupt endpoint completion handlers. ++ * These always run in_irq. */ ++ ++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->inreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ dump_msg(fsg, "bulk-out", req->buf, req->actual); ++ if (req->status || req->actual != bh->bulk_out_intended_length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, ++ bh->bulk_out_intended_length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->outreq_busy = 0; ++ bh->state = BUF_STATE_FULL; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ fsg->intreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 class-specific handlers. These always run in_irq. */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = fsg->ep0req; ++ static u8 cbi_reset_cmnd[6] = { ++ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; ++ ++ /* Error in command transfer? */ ++ if (req->status || req->length != req->actual || ++ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { ++ ++ /* Not all controllers allow a protocol stall after ++ * receiving control-out data, but we'll try anyway. */ ++ fsg_set_halt(fsg, fsg->ep0); ++ return; // Wait for reset ++ } ++ ++ /* Is it the special reset command? */ ++ if (req->actual >= sizeof cbi_reset_cmnd && ++ memcmp(req->buf, cbi_reset_cmnd, ++ sizeof cbi_reset_cmnd) == 0) { ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "cbi reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ return; ++ } ++ ++ VDBG(fsg, "CB[I] accept device-specific command\n"); ++ spin_lock(&fsg->lock); ++ ++ /* Save the command for later */ ++ if (fsg->cbbuf_cmnd_size) ++ WARNING(fsg, "CB[I] overwriting previous command\n"); ++ fsg->cbbuf_cmnd_size = req->actual; ++ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); ++ ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++static int class_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ u16 w_length = le16_to_cpu(ctrl->wLength); ++ ++ if (!fsg->config) ++ return value; ++ ++ /* Handle Bulk-only class-specific requests */ ++ if (transport_is_bbb()) { ++ switch (ctrl->bRequest) { ++ ++ case US_BULK_RESET_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 0) { ++ value = -EDOM; ++ break; ++ } ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "bulk reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ value = DELAYED_STATUS; ++ break; ++ ++ case US_BULK_GET_MAX_LUN: ++ if (ctrl->bRequestType != (USB_DIR_IN | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 1) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get max LUN\n"); ++ *(u8 *) req->buf = fsg->nluns - 1; ++ value = 1; ++ break; ++ } ++ } ++ ++ /* Handle CBI class-specific requests */ ++ else { ++ switch (ctrl->bRequest) { ++ ++ case USB_CBI_ADSC_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0) { ++ value = -EDOM; ++ break; ++ } ++ if (w_length > MAX_COMMAND_SIZE) { ++ value = -EOVERFLOW; ++ break; ++ } ++ value = w_length; ++ fsg->ep0req->context = received_cbi_adsc; ++ break; ++ } ++ } ++ ++ if (value == -EOPNOTSUPP) ++ VDBG(fsg, ++ "unknown class-specific control req " ++ "%02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ le16_to_cpu(ctrl->wValue), w_index, w_length); ++ return value; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 standard request handlers. These always run in_irq. */ ++ ++static int standard_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ ++ /* Usually this just stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will also reconfigure hardware. */ ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ switch (w_value >> 8) { ++ ++ case USB_DT_DEVICE: ++ VDBG(fsg, "get device descriptor\n"); ++ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof device_desc; ++ memcpy(req->buf, &device_desc, value); ++ break; ++ case USB_DT_DEVICE_QUALIFIER: ++ VDBG(fsg, "get device qualifier\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ /* ++ * Assume ep0 uses the same maxpacket value for both ++ * speeds ++ */ ++ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof dev_qualifier; ++ memcpy(req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ VDBG(fsg, "get other-speed config descriptor\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ goto get_config; ++ case USB_DT_CONFIG: ++ VDBG(fsg, "get configuration descriptor\n"); ++get_config: ++ value = populate_config_buf(fsg->gadget, ++ req->buf, ++ w_value >> 8, ++ w_value & 0xff); ++ break; ++ ++ case USB_DT_STRING: ++ VDBG(fsg, "get string descriptor\n"); ++ ++ /* wIndex == language code */ ++ value = usb_gadget_get_string(&fsg_stringtab, ++ w_value & 0xff, req->buf); ++ break; ++ ++ case USB_DT_BOS: ++ VDBG(fsg, "get bos descriptor\n"); ++ ++ if (gadget_is_superspeed(fsg->gadget)) ++ value = populate_bos(fsg, req->buf); ++ break; ++ } ++ ++ break; ++ ++ /* One config, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "set configuration\n"); ++ if (w_value == CONFIG_VALUE || w_value == 0) { ++ fsg->new_config = w_value; ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and set the new config. */ ++ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "get configuration\n"); ++ *(u8 *) req->buf = fsg->config; ++ value = 1; ++ break; ++ ++ case USB_REQ_SET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (fsg->config && w_index == 0) { ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and install the new ++ * interface altsetting. */ ++ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (!fsg->config) ++ break; ++ if (w_index != 0) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get interface\n"); ++ *(u8 *) req->buf = 0; ++ value = 1; ++ break; ++ ++ default: ++ VDBG(fsg, ++ "unknown control req %02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ w_value, w_index, le16_to_cpu(ctrl->wLength)); ++ } ++ ++ return value; ++} ++ ++ ++static int fsg_setup(struct usb_gadget *gadget, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int rc; ++ int w_length = le16_to_cpu(ctrl->wLength); ++ ++ ++fsg->ep0_req_tag; // Record arrival of a new request ++ fsg->ep0req->context = NULL; ++ fsg->ep0req->length = 0; ++ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); ++ ++ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) ++ rc = class_setup_req(fsg, ctrl); ++ else ++ rc = standard_setup_req(fsg, ctrl); ++ ++ /* Respond with data/status or defer until later? */ ++ if (rc >= 0 && rc != DELAYED_STATUS) { ++ rc = min(rc, w_length); ++ fsg->ep0req->length = rc; ++ fsg->ep0req->zero = rc < w_length; ++ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? ++ "ep0-in" : "ep0-out"); ++ rc = ep0_queue(fsg); ++ } ++ ++ /* Device either stalls (rc < 0) or reports success */ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* All the following routines run in process context */ ++ ++ ++/* Use this for bulk or interrupt transfers, not ep0 */ ++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request *req, int *pbusy, ++ enum fsg_buffer_state *state) ++{ ++ int rc; ++ ++ if (ep == fsg->bulk_in) ++ dump_msg(fsg, "bulk-in", req->buf, req->length); ++ else if (ep == fsg->intr_in) ++ dump_msg(fsg, "intr-in", req->buf, req->length); ++ ++ spin_lock_irq(&fsg->lock); ++ *pbusy = 1; ++ *state = BUF_STATE_BUSY; ++ spin_unlock_irq(&fsg->lock); ++ rc = usb_ep_queue(ep, req, GFP_KERNEL); ++ if (rc != 0) { ++ *pbusy = 0; ++ *state = BUF_STATE_EMPTY; ++ ++ /* We can't do much more than wait for a reset */ ++ ++ /* Note: currently the net2280 driver fails zero-length ++ * submissions if DMA is enabled. */ ++ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && ++ req->length == 0)) ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ ep->name, rc); ++ } ++} ++ ++ ++static int sleep_thread(struct fsg_dev *fsg) ++{ ++ int rc = 0; ++ ++ /* Wait until a signal arrives or we are woken up */ ++ for (;;) { ++ try_to_freeze(); ++ set_current_state(TASK_INTERRUPTIBLE); ++ if (signal_pending(current)) { ++ rc = -EINTR; ++ break; ++ } ++ if (fsg->thread_wakeup_needed) ++ break; ++ schedule(); ++ } ++ __set_current_state(TASK_RUNNING); ++ fsg->thread_wakeup_needed = 0; ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_read(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int rc; ++ u32 amount_left; ++ loff_t file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == READ_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = don't read from the ++ * cache), but we don't implement them. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Carry out the file reads */ ++ amount_left = fsg->data_size_from_cmnd; ++ if (unlikely(amount_left == 0)) ++ return -EIO; // No default reply ++ ++ for (;;) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount. ++ * But don't read more than the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* If we were asked to read past the end of file, ++ * end with an empty buffer. */ ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ bh->inreq->length = 0; ++ bh->state = BUF_STATE_FULL; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file read: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file read: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ fsg->residue -= nread; ++ ++ /* Except at the end of the transfer, nread will be ++ * equal to the buffer size, which is divisible by the ++ * bulk-in maxpacket size. ++ */ ++ bh->inreq->length = nread; ++ bh->state = BUF_STATE_FULL; ++ ++ /* If an error occurred, report it and its position */ ++ if (nread < amount) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ if (amount_left == 0) ++ break; // No more left to read ++ ++ /* Send this buffer and go read some more */ ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_write(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int get_some_more; ++ u32 amount_left_to_req, amount_left_to_write; ++ loff_t usb_offset, file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nwritten; ++ int rc; ++ ++ if (curlun->ro) { ++ curlun->sense_data = SS_WRITE_PROTECTED; ++ return -EINVAL; ++ } ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait ++ spin_unlock(&curlun->filp->f_lock); ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == WRITE_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = write directly to the ++ * medium). We don't implement DPO; we implement FUA by ++ * performing synchronous output. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ /* FUA */ ++ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags |= O_DSYNC; ++ spin_unlock(&curlun->filp->f_lock); ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* Carry out the file writes */ ++ get_some_more = 1; ++ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; ++ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; ++ ++ while (amount_left_to_write > 0) { ++ ++ /* Queue a request for more data from the host */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && get_some_more) { ++ ++ /* Figure out how much we want to get: ++ * Try to get the remaining amount, ++ * but not more than the buffer size. ++ */ ++ amount = min(amount_left_to_req, mod_data.buflen); ++ ++ /* Beyond the end of the backing file? */ ++ if (usb_offset >= curlun->file_length) { ++ get_some_more = 0; ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = usb_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ continue; ++ } ++ ++ /* Get the next buffer */ ++ usb_offset += amount; ++ fsg->usb_amount_left -= amount; ++ amount_left_to_req -= amount; ++ if (amount_left_to_req == 0) ++ get_some_more = 0; ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ continue; ++ } ++ ++ /* Write the received data to the backing file */ ++ bh = fsg->next_buffhd_to_drain; ++ if (bh->state == BUF_STATE_EMPTY && !get_some_more) ++ break; // We stopped early ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ fsg->next_buffhd_to_drain = bh->next; ++ bh->state = BUF_STATE_EMPTY; ++ ++ /* Did something go wrong with the transfer? */ ++ if (bh->outreq->status != 0) { ++ curlun->sense_data = SS_COMMUNICATION_FAILURE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ amount = bh->outreq->actual; ++ if (curlun->file_length - file_offset < amount) { ++ LERROR(curlun, ++ "write %u @ %llu beyond end %llu\n", ++ amount, (unsigned long long) file_offset, ++ (unsigned long long) curlun->file_length); ++ amount = curlun->file_length - file_offset; ++ } ++ ++ /* Don't accept excess data. The spec doesn't say ++ * what to do in this case. We'll ignore the error. ++ */ ++ amount = min(amount, bh->bulk_out_intended_length); ++ ++ /* Don't write a partial block */ ++ amount = round_down(amount, curlun->blksize); ++ if (amount == 0) ++ goto empty_write; ++ ++ /* Perform the write */ ++ file_offset_tmp = file_offset; ++ nwritten = vfs_write(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nwritten); ++ if (signal_pending(current)) ++ return -EINTR; // Interrupted! ++ ++ if (nwritten < 0) { ++ LDBG(curlun, "error in file write: %d\n", ++ (int) nwritten); ++ nwritten = 0; ++ } else if (nwritten < amount) { ++ LDBG(curlun, "partial file write: %d/%u\n", ++ (int) nwritten, amount); ++ nwritten = round_down(nwritten, curlun->blksize); ++ } ++ file_offset += nwritten; ++ amount_left_to_write -= nwritten; ++ fsg->residue -= nwritten; ++ ++ /* If an error occurred, report it and its position */ ++ if (nwritten < amount) { ++ curlun->sense_data = SS_WRITE_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ empty_write: ++ /* Did the host decide to stop early? */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length) { ++ fsg->short_packet_received = 1; ++ break; ++ } ++ continue; ++ } ++ ++ /* Wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_synchronize_cache(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int rc; ++ ++ /* We ignore the requested LBA and write out all file's ++ * dirty data buffers. */ ++ rc = fsg_lun_fsync_sub(curlun); ++ if (rc) ++ curlun->sense_data = SS_WRITE_ERROR; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void invalidate_sub(struct fsg_lun *curlun) ++{ ++ struct file *filp = curlun->filp; ++ struct inode *inode = filp->f_path.dentry->d_inode; ++ unsigned long rc; ++ ++ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); ++ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); ++} ++ ++static int do_verify(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ u32 verification_length; ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ loff_t file_offset, file_offset_tmp; ++ u32 amount_left; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) but we don't implement it. */ ++ if ((fsg->cmnd[1] & ~0x10) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ verification_length = get_unaligned_be16(&fsg->cmnd[7]); ++ if (unlikely(verification_length == 0)) ++ return -EIO; // No default reply ++ ++ /* Prepare to carry out the file verify */ ++ amount_left = verification_length << curlun->blkbits; ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Write out all the dirty buffers before invalidating them */ ++ fsg_lun_fsync_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ invalidate_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ /* Just try to read the requested blocks */ ++ while (amount_left > 0) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount, but not more than ++ * the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file verify: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file verify: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ if (nread == 0) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ } ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ u8 *buf = (u8 *) bh->buf; ++ ++ static char vendor_id[] = "Linux "; ++ static char product_disk_id[] = "File-Stor Gadget"; ++ static char product_cdrom_id[] = "File-CD Gadget "; ++ ++ if (!fsg->curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ memset(buf, 0, 36); ++ buf[0] = 0x7f; // Unsupported, no device-type ++ buf[4] = 31; // Additional length ++ return 36; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); ++ if (mod_data.removable) ++ buf[1] = 0x80; ++ buf[2] = 2; // ANSI SCSI level 2 ++ buf[3] = 2; // SCSI-2 INQUIRY data format ++ buf[4] = 31; // Additional length ++ // No special options ++ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, ++ (mod_data.cdrom ? product_cdrom_id : ++ product_disk_id), ++ mod_data.release); ++ return 36; ++} ++ ++ ++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ u32 sd, sdinfo; ++ int valid; ++ ++ /* ++ * From the SCSI-2 spec., section 7.9 (Unit attention condition): ++ * ++ * If a REQUEST SENSE command is received from an initiator ++ * with a pending unit attention condition (before the target ++ * generates the contingent allegiance condition), then the ++ * target shall either: ++ * a) report any pending sense data and preserve the unit ++ * attention condition on the logical unit, or, ++ * b) report the unit attention condition, may discard any ++ * pending sense data, and clear the unit attention ++ * condition on the logical unit for that initiator. ++ * ++ * FSG normally uses option a); enable this code to use option b). ++ */ ++#if 0 ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ } ++#endif ++ ++ if (!curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ sdinfo = 0; ++ valid = 0; ++ } else { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ valid = curlun->info_valid << 7; ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ ++ memset(buf, 0, 18); ++ buf[0] = valid | 0x70; // Valid, current error ++ buf[2] = SK(sd); ++ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ ++ buf[7] = 18 - 8; // Additional sense length ++ buf[12] = ASC(sd); ++ buf[13] = ASCQ(sd); ++ return 18; ++} ++ ++ ++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ int pmi = fsg->cmnd[8]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ /* Check the PMI and LBA fields */ ++ if (pmi > 1 || (pmi == 0 && lba != 0)) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); ++ /* Max logical block */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ return 8; ++} ++ ++ ++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ ++ store_cdrom_address(&buf[4], msf, lba); ++ return 8; ++} ++ ++ ++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ int start_track = fsg->cmnd[6]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ ++ start_track > 1) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 20); ++ buf[1] = (20-2); /* TOC data length */ ++ buf[2] = 1; /* First track number */ ++ buf[3] = 1; /* Last track number */ ++ buf[5] = 0x16; /* Data track, copying allowed */ ++ buf[6] = 0x01; /* Only track is number 1 */ ++ store_cdrom_address(&buf[8], msf, 0); ++ ++ buf[13] = 0x16; /* Lead-out track is data */ ++ buf[14] = 0xAA; /* Lead-out track number */ ++ store_cdrom_address(&buf[16], msf, curlun->num_sectors); ++ return 20; ++} ++ ++ ++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int mscmnd = fsg->cmnd[0]; ++ u8 *buf = (u8 *) bh->buf; ++ u8 *buf0 = buf; ++ int pc, page_code; ++ int changeable_values, all_pages; ++ int valid_page = 0; ++ int len, limit; ++ ++ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ pc = fsg->cmnd[2] >> 6; ++ page_code = fsg->cmnd[2] & 0x3f; ++ if (pc == 3) { ++ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; ++ return -EINVAL; ++ } ++ changeable_values = (pc == 1); ++ all_pages = (page_code == 0x3f); ++ ++ /* Write the mode parameter header. Fixed values are: default ++ * medium type, no cache control (DPOFUA), and no block descriptors. ++ * The only variable value is the WriteProtect bit. We will fill in ++ * the mode data length later. */ ++ memset(buf, 0, 8); ++ if (mscmnd == MODE_SENSE) { ++ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 4; ++ limit = 255; ++ } else { // MODE_SENSE_10 ++ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 8; ++ limit = 65535; // Should really be mod_data.buflen ++ } ++ ++ /* No block descriptors */ ++ ++ /* The mode pages, in numerical order. The only page we support ++ * is the Caching page. */ ++ if (page_code == 0x08 || all_pages) { ++ valid_page = 1; ++ buf[0] = 0x08; // Page code ++ buf[1] = 10; // Page length ++ memset(buf+2, 0, 10); // None of the fields are changeable ++ ++ if (!changeable_values) { ++ buf[2] = 0x04; // Write cache enable, ++ // Read cache not disabled ++ // No cache retention priorities ++ put_unaligned_be16(0xffff, &buf[4]); ++ /* Don't disable prefetch */ ++ /* Minimum prefetch = 0 */ ++ put_unaligned_be16(0xffff, &buf[8]); ++ /* Maximum prefetch */ ++ put_unaligned_be16(0xffff, &buf[10]); ++ /* Maximum prefetch ceiling */ ++ } ++ buf += 12; ++ } ++ ++ /* Check that a valid page was requested and the mode data length ++ * isn't too long. */ ++ len = buf - buf0; ++ if (!valid_page || len > limit) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ /* Store the mode data length */ ++ if (mscmnd == MODE_SENSE) ++ buf0[0] = len - 1; ++ else ++ put_unaligned_be16(len - 2, buf0); ++ return len; ++} ++ ++ ++static int do_start_stop(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int loej, start; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ // int immed = fsg->cmnd[1] & 0x01; ++ loej = fsg->cmnd[4] & 0x02; ++ start = fsg->cmnd[4] & 0x01; ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed ++ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (!start) { ++ ++ /* Are we allowed to unload the media? */ ++ if (curlun->prevent_medium_removal) { ++ LDBG(curlun, "unload attempt prevented\n"); ++ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; ++ return -EINVAL; ++ } ++ if (loej) { // Simulate an unload/eject ++ up_read(&fsg->filesem); ++ down_write(&fsg->filesem); ++ fsg_lun_close(curlun); ++ up_write(&fsg->filesem); ++ down_read(&fsg->filesem); ++ } ++ } else { ++ ++ /* Our emulation doesn't support mounting; the medium is ++ * available for use as soon as it is loaded. */ ++ if (!fsg_lun_is_open(curlun)) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ } ++#endif ++ return 0; ++} ++ ++ ++static int do_prevent_allow(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int prevent; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ prevent = fsg->cmnd[4] & 0x01; ++ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (curlun->prevent_medium_removal && !prevent) ++ fsg_lun_fsync_sub(curlun); ++ curlun->prevent_medium_removal = prevent; ++ return 0; ++} ++ ++ ++static int do_read_format_capacities(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ ++ buf[0] = buf[1] = buf[2] = 0; ++ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor ++ buf += 4; ++ ++ put_unaligned_be32(curlun->num_sectors, &buf[0]); ++ /* Number of blocks */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ buf[4] = 0x02; /* Current capacity */ ++ return 12; ++} ++ ++ ++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ ++ /* We don't support MODE SELECT */ ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int halt_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = fsg_set_halt(fsg, fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint halt\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_halt(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ DBG(fsg, "bulk-in set wedge\n"); ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint wedge\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int throw_away_data(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ u32 amount; ++ int rc; ++ ++ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || ++ fsg->usb_amount_left > 0) { ++ ++ /* Throw away the data in a filled buffer */ ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ bh->state = BUF_STATE_EMPTY; ++ fsg->next_buffhd_to_drain = bh->next; ++ ++ /* A short packet or an error ends everything */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length || ++ bh->outreq->status != 0) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ return -EINTR; ++ } ++ continue; ++ } ++ ++ /* Try to submit another request if we need one */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { ++ amount = min(fsg->usb_amount_left, ++ (u32) mod_data.buflen); ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ fsg->usb_amount_left -= amount; ++ continue; ++ } ++ ++ /* Otherwise wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ return 0; ++} ++ ++ ++static int finish_reply(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ int rc = 0; ++ ++ switch (fsg->data_dir) { ++ case DATA_DIR_NONE: ++ break; // Nothing to send ++ ++ /* If we don't know whether the host wants to read or write, ++ * this must be CB or CBI with an unknown command. We mustn't ++ * try to send or receive any data. So stall both bulk pipes ++ * if we can and wait for a reset. */ ++ case DATA_DIR_UNKNOWN: ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* All but the last buffer of data must have already been sent */ ++ case DATA_DIR_TO_HOST: ++ if (fsg->data_size == 0) ++ ; // Nothing to send ++ ++ /* If there's no residue, simply send the last buffer */ ++ else if (fsg->residue == 0) { ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ /* There is a residue. For CB and CBI, simply mark the end ++ * of the data with a short packet. However, if we are ++ * allowed to stall, there was no data at all (residue == ++ * data_size), and the command failed (invalid LUN or ++ * sense data is set), then halt the bulk-in endpoint ++ * instead. */ ++ else if (!transport_is_bbb()) { ++ if (mod_data.can_stall && ++ fsg->residue == fsg->data_size && ++ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { ++ bh->state = BUF_STATE_EMPTY; ++ rc = halt_bulk_in_endpoint(fsg); ++ } else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ } ++ ++ /* ++ * For Bulk-only, mark the end of the data with a short ++ * packet. If we are allowed to stall, halt the bulk-in ++ * endpoint. (Note: This violates the Bulk-Only Transport ++ * specification, which requires us to pad the data if we ++ * don't halt the endpoint. Presumably nobody will mind.) ++ */ ++ else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ if (mod_data.can_stall) ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* We have processed all we want from the data the host has sent. ++ * There may still be outstanding bulk-out requests. */ ++ case DATA_DIR_FROM_HOST: ++ if (fsg->residue == 0) ++ ; // Nothing to receive ++ ++ /* Did the host stop sending unexpectedly early? */ ++ else if (fsg->short_packet_received) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++ ++ /* We haven't processed all the incoming data. Even though ++ * we may be allowed to stall, doing so would cause a race. ++ * The controller may already have ACK'ed all the remaining ++ * bulk-out packets, in which case the host wouldn't see a ++ * STALL. Not realizing the endpoint was halted, it wouldn't ++ * clear the halt -- leading to problems later on. */ ++#if 0 ++ else if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++#endif ++ ++ /* We can't stall. Read in the excess data and throw it ++ * all away. */ ++ else ++ rc = throw_away_data(fsg); ++ break; ++ } ++ return rc; ++} ++ ++ ++static int send_status(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ struct fsg_buffhd *bh; ++ int rc; ++ u8 status = US_BULK_STAT_OK; ++ u32 sd, sdinfo = 0; ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ if (curlun) { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ } else if (fsg->bad_lun_okay) ++ sd = SS_NO_SENSE; ++ else ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ ++ if (fsg->phase_error) { ++ DBG(fsg, "sending phase-error status\n"); ++ status = US_BULK_STAT_PHASE; ++ sd = SS_INVALID_COMMAND; ++ } else if (sd != SS_NO_SENSE) { ++ DBG(fsg, "sending command-failure status\n"); ++ status = US_BULK_STAT_FAIL; ++ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" ++ " info x%x\n", ++ SK(sd), ASC(sd), ASCQ(sd), sdinfo); ++ } ++ ++ if (transport_is_bbb()) { ++ struct bulk_cs_wrap *csw = bh->buf; ++ ++ /* Store and send the Bulk-only CSW */ ++ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); ++ csw->Tag = fsg->tag; ++ csw->Residue = cpu_to_le32(fsg->residue); ++ csw->Status = status; ++ ++ bh->inreq->length = US_BULK_CS_WRAP_LEN; ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ ++ } else if (mod_data.transport_type == USB_PR_CB) { ++ ++ /* Control-Bulk transport has no status phase! */ ++ return 0; ++ ++ } else { // USB_PR_CBI ++ struct interrupt_data *buf = bh->buf; ++ ++ /* Store and send the Interrupt data. UFI sends the ASC ++ * and ASCQ bytes. Everything else sends a Type (which ++ * is always 0) and the status Value. */ ++ if (mod_data.protocol_type == USB_SC_UFI) { ++ buf->bType = ASC(sd); ++ buf->bValue = ASCQ(sd); ++ } else { ++ buf->bType = 0; ++ buf->bValue = status; ++ } ++ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; ++ ++ fsg->intr_buffhd = bh; // Point to the right buffhd ++ fsg->intreq->buf = bh->inreq->buf; ++ fsg->intreq->context = bh; ++ start_transfer(fsg, fsg->intr_in, fsg->intreq, ++ &fsg->intreq_busy, &bh->state); ++ } ++ ++ fsg->next_buffhd_to_fill = bh->next; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Check whether the command is properly formed and whether its data size ++ * and direction agree with the values we already have. */ ++static int check_command(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ int i; ++ int lun = fsg->cmnd[1] >> 5; ++ static const char dirletter[4] = {'u', 'o', 'i', 'n'}; ++ char hdlen[20]; ++ struct fsg_lun *curlun; ++ ++ /* Adjust the expected cmnd_size for protocol encapsulation padding. ++ * Transparent SCSI doesn't pad. */ ++ if (protocol_is_scsi()) ++ ; ++ ++ /* There's some disagreement as to whether RBC pads commands or not. ++ * We'll play it safe and accept either form. */ ++ else if (mod_data.protocol_type == USB_SC_RBC) { ++ if (fsg->cmnd_size == 12) ++ cmnd_size = 12; ++ ++ /* All the other protocols pad to 12 bytes */ ++ } else ++ cmnd_size = 12; ++ ++ hdlen[0] = 0; ++ if (fsg->data_dir != DATA_DIR_UNKNOWN) ++ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], ++ fsg->data_size); ++ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", ++ name, cmnd_size, dirletter[(int) data_dir], ++ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); ++ ++ /* We can't reply at all until we know the correct data direction ++ * and size. */ ++ if (fsg->data_size_from_cmnd == 0) ++ data_dir = DATA_DIR_NONE; ++ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI ++ fsg->data_dir = data_dir; ++ fsg->data_size = fsg->data_size_from_cmnd; ++ ++ } else { // Bulk-only ++ if (fsg->data_size < fsg->data_size_from_cmnd) { ++ ++ /* Host data size < Device data size is a phase error. ++ * Carry out the command, but only transfer as much ++ * as we are allowed. */ ++ fsg->data_size_from_cmnd = fsg->data_size; ++ fsg->phase_error = 1; ++ } ++ } ++ fsg->residue = fsg->usb_amount_left = fsg->data_size; ++ ++ /* Conflicting data directions is a phase error */ ++ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ ++ /* Verify the length of the command itself */ ++ if (cmnd_size != fsg->cmnd_size) { ++ ++ /* Special case workaround: There are plenty of buggy SCSI ++ * implementations. Many have issues with cbw->Length ++ * field passing a wrong command size. For those cases we ++ * always try to work around the problem by using the length ++ * sent by the host side provided it is at least as large ++ * as the correct command length. ++ * Examples of such cases would be MS-Windows, which issues ++ * REQUEST SENSE with cbw->Length == 12 where it should ++ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and ++ * REQUEST SENSE with cbw->Length == 10 where it should ++ * be 6 as well. ++ */ ++ if (cmnd_size <= fsg->cmnd_size) { ++ DBG(fsg, "%s is buggy! Expected length %d " ++ "but we got %d\n", name, ++ cmnd_size, fsg->cmnd_size); ++ cmnd_size = fsg->cmnd_size; ++ } else { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ } ++ ++ /* Check that the LUN values are consistent */ ++ if (transport_is_bbb()) { ++ if (fsg->lun != lun) ++ DBG(fsg, "using LUN %d from CBW, " ++ "not LUN %d from CDB\n", ++ fsg->lun, lun); ++ } ++ ++ /* Check the LUN */ ++ curlun = fsg->curlun; ++ if (curlun) { ++ if (fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ } else { ++ fsg->bad_lun_okay = 0; ++ ++ /* INQUIRY and REQUEST SENSE commands are explicitly allowed ++ * to use unsupported LUNs; all others may not. */ ++ if (fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ DBG(fsg, "unsupported LUN %d\n", fsg->lun); ++ return -EINVAL; ++ } ++ } ++ ++ /* If a unit attention condition exists, only INQUIRY and ++ * REQUEST SENSE commands are allowed; anything else must fail. */ ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE && ++ fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ return -EINVAL; ++ } ++ ++ /* Check that only command bytes listed in the mask are non-zero */ ++ fsg->cmnd[1] &= 0x1f; // Mask away the LUN ++ for (i = 1; i < cmnd_size; ++i) { ++ if (fsg->cmnd[i] && !(mask & (1 << i))) { ++ if (curlun) ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ ++ /* If the medium isn't mounted and the command needs to access ++ * it, return an error. */ ++ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/* wrapper of check_command for data size in blocks handling */ ++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ if (fsg->curlun) ++ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; ++ return check_command(fsg, cmnd_size, data_dir, ++ mask, needs_medium, name); ++} ++ ++static int do_scsi_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc; ++ int reply = -EINVAL; ++ int i; ++ static char unknown[16]; ++ ++ dump_cdb(fsg); ++ ++ /* Wait for the next buffer to become available for data or status */ ++ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ fsg->phase_error = 0; ++ fsg->short_packet_received = 0; ++ ++ down_read(&fsg->filesem); // We're using the backing file ++ switch (fsg->cmnd[0]) { ++ ++ case INQUIRY: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "INQUIRY")) == 0) ++ reply = do_inquiry(fsg, bh); ++ break; ++ ++ case MODE_SELECT: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, ++ (1<<1) | (1<<4), 0, ++ "MODE SELECT(6)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SELECT_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, ++ (1<<1) | (3<<7), 0, ++ "MODE SELECT(10)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (1<<4), 0, ++ "MODE SENSE(6)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case MODE_SENSE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (3<<7), 0, ++ "MODE SENSE(10)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case ALLOW_MEDIUM_REMOVAL: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<4), 0, ++ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) ++ reply = do_prevent_allow(fsg); ++ break; ++ ++ case READ_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_TO_HOST, ++ (7<<1) | (1<<4), 1, ++ "READ(6)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "READ(10)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "READ(12)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_CAPACITY: ++ fsg->data_size_from_cmnd = 8; ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (0xf<<2) | (1<<8), 1, ++ "READ CAPACITY")) == 0) ++ reply = do_read_capacity(fsg, bh); ++ break; ++ ++ case READ_HEADER: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7) | (0x1f<<1), 1, ++ "READ HEADER")) == 0) ++ reply = do_read_header(fsg, bh); ++ break; ++ ++ case READ_TOC: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (7<<6) | (1<<1), 1, ++ "READ TOC")) == 0) ++ reply = do_read_toc(fsg, bh); ++ break; ++ ++ case READ_FORMAT_CAPACITIES: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7), 1, ++ "READ FORMAT CAPACITIES")) == 0) ++ reply = do_read_format_capacities(fsg, bh); ++ break; ++ ++ case REQUEST_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "REQUEST SENSE")) == 0) ++ reply = do_request_sense(fsg, bh); ++ break; ++ ++ case START_STOP: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<1) | (1<<4), 0, ++ "START-STOP UNIT")) == 0) ++ reply = do_start_stop(fsg); ++ break; ++ ++ case SYNCHRONIZE_CACHE: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (0xf<<2) | (3<<7), 1, ++ "SYNCHRONIZE CACHE")) == 0) ++ reply = do_synchronize_cache(fsg); ++ break; ++ ++ case TEST_UNIT_READY: ++ fsg->data_size_from_cmnd = 0; ++ reply = check_command(fsg, 6, DATA_DIR_NONE, ++ 0, 1, ++ "TEST UNIT READY"); ++ break; ++ ++ /* Although optional, this command is used by MS-Windows. We ++ * support a minimal version: BytChk must be 0. */ ++ case VERIFY: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "VERIFY")) == 0) ++ reply = do_verify(fsg); ++ break; ++ ++ case WRITE_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_FROM_HOST, ++ (7<<1) | (1<<4), 1, ++ "WRITE(6)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "WRITE(10)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "WRITE(12)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ /* Some mandatory commands that we recognize but don't implement. ++ * They don't mean much in this setting. It's left as an exercise ++ * for anyone interested to implement RESERVE and RELEASE in terms ++ * of Posix locks. */ ++ case FORMAT_UNIT: ++ case RELEASE: ++ case RESERVE: ++ case SEND_DIAGNOSTIC: ++ // Fall through ++ ++ default: ++ unknown_cmnd: ++ fsg->data_size_from_cmnd = 0; ++ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); ++ if ((reply = check_command(fsg, fsg->cmnd_size, ++ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { ++ fsg->curlun->sense_data = SS_INVALID_COMMAND; ++ reply = -EINVAL; ++ } ++ break; ++ } ++ up_read(&fsg->filesem); ++ ++ if (reply == -EINTR || signal_pending(current)) ++ return -EINTR; ++ ++ /* Set up the single reply buffer for finish_reply() */ ++ if (reply == -EINVAL) ++ reply = 0; // Error reply length ++ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { ++ reply = min((u32) reply, fsg->data_size_from_cmnd); ++ bh->inreq->length = reply; ++ bh->state = BUF_STATE_FULL; ++ fsg->residue -= reply; ++ } // Otherwise it's already set ++ ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = bh->outreq; ++ struct bulk_cb_wrap *cbw = req->buf; ++ ++ /* Was this a real packet? Should it be ignored? */ ++ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ return -EINVAL; ++ ++ /* Is the CBW valid? */ ++ if (req->actual != US_BULK_CB_WRAP_LEN || ++ cbw->Signature != cpu_to_le32( ++ US_BULK_CB_SIGN)) { ++ DBG(fsg, "invalid CBW: len %u sig 0x%x\n", ++ req->actual, ++ le32_to_cpu(cbw->Signature)); ++ ++ /* The Bulk-only spec says we MUST stall the IN endpoint ++ * (6.6.1), so it's unavoidable. It also says we must ++ * retain this state until the next reset, but there's ++ * no way to tell the controller driver it should ignore ++ * Clear-Feature(HALT) requests. ++ * ++ * We aren't required to halt the OUT endpoint; instead ++ * we can simply accept and discard any data received ++ * until the next reset. */ ++ wedge_bulk_in_endpoint(fsg); ++ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ return -EINVAL; ++ } ++ ++ /* Is the CBW meaningful? */ ++ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || ++ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { ++ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " ++ "cmdlen %u\n", ++ cbw->Lun, cbw->Flags, cbw->Length); ++ ++ /* We can do anything we want here, so let's stall the ++ * bulk pipes if we are allowed to. */ ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ halt_bulk_in_endpoint(fsg); ++ } ++ return -EINVAL; ++ } ++ ++ /* Save the command for later */ ++ fsg->cmnd_size = cbw->Length; ++ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); ++ if (cbw->Flags & US_BULK_FLAG_IN) ++ fsg->data_dir = DATA_DIR_TO_HOST; ++ else ++ fsg->data_dir = DATA_DIR_FROM_HOST; ++ fsg->data_size = le32_to_cpu(cbw->DataTransferLength); ++ if (fsg->data_size == 0) ++ fsg->data_dir = DATA_DIR_NONE; ++ fsg->lun = cbw->Lun; ++ fsg->tag = cbw->Tag; ++ return 0; ++} ++ ++ ++static int get_next_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc = 0; ++ ++ if (transport_is_bbb()) { ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Queue a request to read a Bulk-only CBW */ ++ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ ++ /* We will drain the buffer in software, which means we ++ * can reuse it for the next filling. No need to advance ++ * next_buffhd_to_fill. */ ++ ++ /* Wait for the CBW to arrive */ ++ while (bh->state != BUF_STATE_FULL) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ smp_rmb(); ++ rc = received_cbw(fsg, bh); ++ bh->state = BUF_STATE_EMPTY; ++ ++ } else { // USB_PR_CB or USB_PR_CBI ++ ++ /* Wait for the next command to arrive */ ++ while (fsg->cbbuf_cmnd_size == 0) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Is the previous status interrupt request still busy? ++ * The host is allowed to skip reading the status, ++ * so we must cancel it. */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ ++ /* Copy the command and mark the buffer empty */ ++ fsg->data_dir = DATA_DIR_UNKNOWN; ++ spin_lock_irq(&fsg->lock); ++ fsg->cmnd_size = fsg->cbbuf_cmnd_size; ++ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); ++ fsg->cbbuf_cmnd_size = 0; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Use LUN from the command */ ++ fsg->lun = fsg->cmnd[1] >> 5; ++ } ++ ++ /* Update current lun */ ++ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) ++ fsg->curlun = &fsg->luns[fsg->lun]; ++ else ++ fsg->curlun = NULL; ++ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *d) ++{ ++ int rc; ++ ++ ep->driver_data = fsg; ++ ep->desc = d; ++ rc = usb_ep_enable(ep); ++ if (rc) ++ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); ++ return rc; ++} ++ ++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request **preq) ++{ ++ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); ++ if (*preq) ++ return 0; ++ ERROR(fsg, "can't allocate request for %s\n", ep->name); ++ return -ENOMEM; ++} ++ ++/* ++ * Reset interface setting and re-init endpoint state (toggle etc). ++ * Call with altsetting < 0 to disable the interface. The only other ++ * available altsetting is 0, which enables the interface. ++ */ ++static int do_set_interface(struct fsg_dev *fsg, int altsetting) ++{ ++ int rc = 0; ++ int i; ++ const struct usb_endpoint_descriptor *d; ++ ++ if (fsg->running) ++ DBG(fsg, "reset interface\n"); ++ ++reset: ++ /* Deallocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if (bh->inreq) { ++ usb_ep_free_request(fsg->bulk_in, bh->inreq); ++ bh->inreq = NULL; ++ } ++ if (bh->outreq) { ++ usb_ep_free_request(fsg->bulk_out, bh->outreq); ++ bh->outreq = NULL; ++ } ++ } ++ if (fsg->intreq) { ++ usb_ep_free_request(fsg->intr_in, fsg->intreq); ++ fsg->intreq = NULL; ++ } ++ ++ /* Disable the endpoints */ ++ if (fsg->bulk_in_enabled) { ++ usb_ep_disable(fsg->bulk_in); ++ fsg->bulk_in_enabled = 0; ++ } ++ if (fsg->bulk_out_enabled) { ++ usb_ep_disable(fsg->bulk_out); ++ fsg->bulk_out_enabled = 0; ++ } ++ if (fsg->intr_in_enabled) { ++ usb_ep_disable(fsg->intr_in); ++ fsg->intr_in_enabled = 0; ++ } ++ ++ fsg->running = 0; ++ if (altsetting < 0 || rc != 0) ++ return rc; ++ ++ DBG(fsg, "set interface %d\n", altsetting); ++ ++ /* Enable the endpoints */ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, ++ &fsg_ss_bulk_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) ++ goto reset; ++ fsg->bulk_in_enabled = 1; ++ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, ++ &fsg_ss_bulk_out_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) ++ goto reset; ++ fsg->bulk_out_enabled = 1; ++ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); ++ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ ++ if (transport_is_cbi()) { ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, ++ &fsg_ss_intr_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) ++ goto reset; ++ fsg->intr_in_enabled = 1; ++ } ++ ++ /* Allocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) ++ goto reset; ++ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) ++ goto reset; ++ bh->inreq->buf = bh->outreq->buf = bh->buf; ++ bh->inreq->context = bh->outreq->context = bh; ++ bh->inreq->complete = bulk_in_complete; ++ bh->outreq->complete = bulk_out_complete; ++ } ++ if (transport_is_cbi()) { ++ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) ++ goto reset; ++ fsg->intreq->complete = intr_in_complete; ++ } ++ ++ fsg->running = 1; ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ return rc; ++} ++ ++ ++/* ++ * Change our operational configuration. This code must agree with the code ++ * that returns config descriptors, and with interface altsetting code. ++ * ++ * It's also responsible for power management interactions. Some ++ * configurations might not work with our current power sources. ++ * For now we just assume the gadget is always self-powered. ++ */ ++static int do_set_config(struct fsg_dev *fsg, u8 new_config) ++{ ++ int rc = 0; ++ ++ /* Disable the single interface */ ++ if (fsg->config != 0) { ++ DBG(fsg, "reset config\n"); ++ fsg->config = 0; ++ rc = do_set_interface(fsg, -1); ++ } ++ ++ /* Enable the interface */ ++ if (new_config != 0) { ++ fsg->config = new_config; ++ if ((rc = do_set_interface(fsg, 0)) != 0) ++ fsg->config = 0; // Reset on errors ++ else ++ INFO(fsg, "%s config #%d\n", ++ usb_speed_string(fsg->gadget->speed), ++ fsg->config); ++ } ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void handle_exception(struct fsg_dev *fsg) ++{ ++ siginfo_t info; ++ int sig; ++ int i; ++ int num_active; ++ struct fsg_buffhd *bh; ++ enum fsg_state old_state; ++ u8 new_config; ++ struct fsg_lun *curlun; ++ unsigned int exception_req_tag; ++ int rc; ++ ++ /* Clear the existing signals. Anything but SIGUSR1 is converted ++ * into a high-priority EXIT exception. */ ++ for (;;) { ++ sig = dequeue_signal_lock(current, ¤t->blocked, &info); ++ if (!sig) ++ break; ++ if (sig != SIGUSR1) { ++ if (fsg->state < FSG_STATE_EXIT) ++ DBG(fsg, "Main thread exiting on signal\n"); ++ raise_exception(fsg, FSG_STATE_EXIT); ++ } ++ } ++ ++ /* Cancel all the pending transfers */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ if (bh->inreq_busy) ++ usb_ep_dequeue(fsg->bulk_in, bh->inreq); ++ if (bh->outreq_busy) ++ usb_ep_dequeue(fsg->bulk_out, bh->outreq); ++ } ++ ++ /* Wait until everything is idle */ ++ for (;;) { ++ num_active = fsg->intreq_busy; ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ num_active += bh->inreq_busy + bh->outreq_busy; ++ } ++ if (num_active == 0) ++ break; ++ if (sleep_thread(fsg)) ++ return; ++ } ++ ++ /* Clear out the controller's fifos */ ++ if (fsg->bulk_in_enabled) ++ usb_ep_fifo_flush(fsg->bulk_in); ++ if (fsg->bulk_out_enabled) ++ usb_ep_fifo_flush(fsg->bulk_out); ++ if (fsg->intr_in_enabled) ++ usb_ep_fifo_flush(fsg->intr_in); ++ ++ /* Reset the I/O buffer states and pointers, the SCSI ++ * state, and the exception. Then invoke the handler. */ ++ spin_lock_irq(&fsg->lock); ++ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ bh->state = BUF_STATE_EMPTY; ++ } ++ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = ++ &fsg->buffhds[0]; ++ ++ exception_req_tag = fsg->exception_req_tag; ++ new_config = fsg->new_config; ++ old_state = fsg->state; ++ ++ if (old_state == FSG_STATE_ABORT_BULK_OUT) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ else { ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->prevent_medium_removal = 0; ++ curlun->sense_data = curlun->unit_attention_data = ++ SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ fsg->state = FSG_STATE_IDLE; ++ } ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Carry out any extra actions required for the exception */ ++ switch (old_state) { ++ default: ++ break; ++ ++ case FSG_STATE_ABORT_BULK_OUT: ++ send_status(fsg); ++ spin_lock_irq(&fsg->lock); ++ if (fsg->state == FSG_STATE_STATUS_PHASE) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ break; ++ ++ case FSG_STATE_RESET: ++ /* In case we were forced against our will to halt a ++ * bulk endpoint, clear the halt now. (The SuperH UDC ++ * requires this.) */ ++ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ usb_ep_clear_halt(fsg->bulk_in); ++ ++ if (transport_is_bbb()) { ++ if (fsg->ep0_req_tag == exception_req_tag) ++ ep0_queue(fsg); // Complete the status stage ++ ++ } else if (transport_is_cbi()) ++ send_status(fsg); // Status by interrupt pipe ++ ++ /* Technically this should go here, but it would only be ++ * a waste of time. Ditto for the INTERFACE_CHANGE and ++ * CONFIG_CHANGE cases. */ ++ // for (i = 0; i < fsg->nluns; ++i) ++ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ break; ++ ++ case FSG_STATE_INTERFACE_CHANGE: ++ rc = do_set_interface(fsg, 0); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_CONFIG_CHANGE: ++ rc = do_set_config(fsg, new_config); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_DISCONNECT: ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg_lun_fsync_sub(fsg->luns + i); ++ do_set_config(fsg, 0); // Unconfigured state ++ break; ++ ++ case FSG_STATE_EXIT: ++ case FSG_STATE_TERMINATED: ++ do_set_config(fsg, 0); // Free resources ++ spin_lock_irq(&fsg->lock); ++ fsg->state = FSG_STATE_TERMINATED; // Stop the thread ++ spin_unlock_irq(&fsg->lock); ++ break; ++ } ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_main_thread(void *fsg_) ++{ ++ struct fsg_dev *fsg = fsg_; ++ ++ /* Allow the thread to be killed by a signal, but set the signal mask ++ * to block everything but INT, TERM, KILL, and USR1. */ ++ allow_signal(SIGINT); ++ allow_signal(SIGTERM); ++ allow_signal(SIGKILL); ++ allow_signal(SIGUSR1); ++ ++ /* Allow the thread to be frozen */ ++ set_freezable(); ++ ++ /* Arrange for userspace references to be interpreted as kernel ++ * pointers. That way we can pass a kernel pointer to a routine ++ * that expects a __user pointer and it will work okay. */ ++ set_fs(get_ds()); ++ ++ /* The main loop */ ++ while (fsg->state != FSG_STATE_TERMINATED) { ++ if (exception_in_progress(fsg) || signal_pending(current)) { ++ handle_exception(fsg); ++ continue; ++ } ++ ++ if (!fsg->running) { ++ sleep_thread(fsg); ++ continue; ++ } ++ ++ if (get_next_command(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_DATA_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (do_scsi_command(fsg) || finish_reply(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (send_status(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ } ++ ++ spin_lock_irq(&fsg->lock); ++ fsg->thread_task = NULL; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* If we are exiting because of a signal, unregister the ++ * gadget driver. */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Let the unbind and cleanup routines know the thread has exited */ ++ complete_and_exit(&fsg->thread_notifier, 0); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* The write permissions and store_xxx pointers are set in fsg_bind() */ ++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); ++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); ++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_release(struct kref *ref) ++{ ++ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); ++ ++ kfree(fsg->luns); ++ kfree(fsg); ++} ++ ++static void lun_release(struct device *dev) ++{ ++ struct rw_semaphore *filesem = dev_get_drvdata(dev); ++ struct fsg_dev *fsg = ++ container_of(filesem, struct fsg_dev, filesem); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++ ++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_request *req = fsg->ep0req; ++ ++ DBG(fsg, "unbind\n"); ++ clear_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* If the thread isn't already dead, tell it to exit now */ ++ if (fsg->state != FSG_STATE_TERMINATED) { ++ raise_exception(fsg, FSG_STATE_EXIT); ++ wait_for_completion(&fsg->thread_notifier); ++ ++ /* The cleanup routine waits for this completion also */ ++ complete(&fsg->thread_notifier); ++ } ++ ++ /* Unregister the sysfs attribute files and the LUNs */ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (curlun->registered) { ++ device_remove_file(&curlun->dev, &dev_attr_nofua); ++ device_remove_file(&curlun->dev, &dev_attr_ro); ++ device_remove_file(&curlun->dev, &dev_attr_file); ++ fsg_lun_close(curlun); ++ device_unregister(&curlun->dev); ++ curlun->registered = 0; ++ } ++ } ++ ++ /* Free the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) ++ kfree(fsg->buffhds[i].buf); ++ ++ /* Free the request and buffer for endpoint 0 */ ++ if (req) { ++ kfree(req->buf); ++ usb_ep_free_request(fsg->ep0, req); ++ } ++ ++ set_gadget_data(gadget, NULL); ++} ++ ++ ++static int __init check_parameters(struct fsg_dev *fsg) ++{ ++ int prot; ++ int gcnum; ++ ++ /* Store the default values */ ++ mod_data.transport_type = USB_PR_BULK; ++ mod_data.transport_name = "Bulk-only"; ++ mod_data.protocol_type = USB_SC_SCSI; ++ mod_data.protocol_name = "Transparent SCSI"; ++ ++ /* Some peripheral controllers are known not to be able to ++ * halt bulk endpoints correctly. If one of them is present, ++ * disable stalls. ++ */ ++ if (gadget_is_at91(fsg->gadget)) ++ mod_data.can_stall = 0; ++ ++ if (mod_data.release == 0xffff) { // Parameter wasn't set ++ gcnum = usb_gadget_controller_number(fsg->gadget); ++ if (gcnum >= 0) ++ mod_data.release = 0x0300 + gcnum; ++ else { ++ WARNING(fsg, "controller '%s' not recognized\n", ++ fsg->gadget->name); ++ mod_data.release = 0x0399; ++ } ++ } ++ ++ prot = simple_strtol(mod_data.protocol_parm, NULL, 0); ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { ++ mod_data.transport_type = USB_PR_CB; ++ mod_data.transport_name = "Control-Bulk"; ++ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { ++ mod_data.transport_type = USB_PR_CBI; ++ mod_data.transport_name = "Control-Bulk-Interrupt"; ++ } else { ++ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); ++ return -EINVAL; ++ } ++ ++ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || ++ prot == USB_SC_SCSI) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || ++ prot == USB_SC_RBC) { ++ mod_data.protocol_type = USB_SC_RBC; ++ mod_data.protocol_name = "RBC"; ++ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || ++ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || ++ prot == USB_SC_8020) { ++ mod_data.protocol_type = USB_SC_8020; ++ mod_data.protocol_name = "8020i (ATAPI)"; ++ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || ++ prot == USB_SC_QIC) { ++ mod_data.protocol_type = USB_SC_QIC; ++ mod_data.protocol_name = "QIC-157"; ++ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || ++ prot == USB_SC_UFI) { ++ mod_data.protocol_type = USB_SC_UFI; ++ mod_data.protocol_name = "UFI"; ++ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || ++ prot == USB_SC_8070) { ++ mod_data.protocol_type = USB_SC_8070; ++ mod_data.protocol_name = "8070i"; ++ } else { ++ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); ++ return -EINVAL; ++ } ++ ++ mod_data.buflen &= PAGE_CACHE_MASK; ++ if (mod_data.buflen <= 0) { ++ ERROR(fsg, "invalid buflen\n"); ++ return -ETOOSMALL; ++ } ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ /* Serial string handling. ++ * On a real device, the serial string would be loaded ++ * from permanent storage. */ ++ if (mod_data.serial) { ++ const char *ch; ++ unsigned len = 0; ++ ++ /* Sanity check : ++ * The CB[I] specification limits the serial string to ++ * 12 uppercase hexadecimal characters. ++ * BBB need at least 12 uppercase hexadecimal characters, ++ * with a maximum of 126. */ ++ for (ch = mod_data.serial; *ch; ++ch) { ++ ++len; ++ if ((*ch < '0' || *ch > '9') && ++ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ ++ WARNING(fsg, ++ "Invalid serial string character: %c\n", ++ *ch); ++ goto no_serial; ++ } ++ } ++ if (len > 126 || ++ (mod_data.transport_type == USB_PR_BULK && len < 12) || ++ (mod_data.transport_type != USB_PR_BULK && len > 12)) { ++ WARNING(fsg, "Invalid serial string length!\n"); ++ goto no_serial; ++ } ++ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; ++ } else { ++ WARNING(fsg, "No serial-number string provided!\n"); ++ no_serial: ++ device_desc.iSerialNumber = 0; ++ } ++ ++ return 0; ++} ++ ++ ++static int __init fsg_bind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ int rc; ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_ep *ep; ++ struct usb_request *req; ++ char *pathbuf, *p; ++ ++ fsg->gadget = gadget; ++ set_gadget_data(gadget, fsg); ++ fsg->ep0 = gadget->ep0; ++ fsg->ep0->driver_data = fsg; ++ ++ if ((rc = check_parameters(fsg)) != 0) ++ goto out; ++ ++ if (mod_data.removable) { // Enable the store_xxx attributes ++ dev_attr_file.attr.mode = 0644; ++ dev_attr_file.store = fsg_store_file; ++ if (!mod_data.cdrom) { ++ dev_attr_ro.attr.mode = 0644; ++ dev_attr_ro.store = fsg_store_ro; ++ } ++ } ++ ++ /* Only for removable media? */ ++ dev_attr_nofua.attr.mode = 0644; ++ dev_attr_nofua.store = fsg_store_nofua; ++ ++ /* Find out how many LUNs there should be */ ++ i = mod_data.nluns; ++ if (i == 0) ++ i = max(mod_data.num_filenames, 1u); ++ if (i > FSG_MAX_LUNS) { ++ ERROR(fsg, "invalid number of LUNs: %d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ ++ /* Create the LUNs, open their backing files, and register the ++ * LUN devices in sysfs. */ ++ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); ++ if (!fsg->luns) { ++ rc = -ENOMEM; ++ goto out; ++ } ++ fsg->nluns = i; ++ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->cdrom = !!mod_data.cdrom; ++ curlun->ro = mod_data.cdrom || mod_data.ro[i]; ++ curlun->initially_ro = curlun->ro; ++ curlun->removable = mod_data.removable; ++ curlun->nofua = mod_data.nofua[i]; ++ curlun->dev.release = lun_release; ++ curlun->dev.parent = &gadget->dev; ++ curlun->dev.driver = &fsg_driver.driver; ++ dev_set_drvdata(&curlun->dev, &fsg->filesem); ++ dev_set_name(&curlun->dev,"%s-lun%d", ++ dev_name(&gadget->dev), i); ++ ++ kref_get(&fsg->ref); ++ rc = device_register(&curlun->dev); ++ if (rc) { ++ INFO(fsg, "failed to register LUN%d: %d\n", i, rc); ++ put_device(&curlun->dev); ++ goto out; ++ } ++ curlun->registered = 1; ++ ++ rc = device_create_file(&curlun->dev, &dev_attr_ro); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_nofua); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_file); ++ if (rc) ++ goto out; ++ ++ if (mod_data.file[i] && *mod_data.file[i]) { ++ rc = fsg_lun_open(curlun, mod_data.file[i]); ++ if (rc) ++ goto out; ++ } else if (!mod_data.removable) { ++ ERROR(fsg, "no file given for LUN%d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ } ++ ++ /* Find all the endpoints we will use */ ++ usb_ep_autoconfig_reset(gadget); ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_in = ep; ++ ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_out = ep; ++ ++ if (transport_is_cbi()) { ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->intr_in = ep; ++ } ++ ++ /* Fix up the descriptors */ ++ device_desc.idVendor = cpu_to_le16(mod_data.vendor); ++ device_desc.idProduct = cpu_to_le16(mod_data.product); ++ device_desc.bcdDevice = cpu_to_le16(mod_data.release); ++ ++ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints ++ fsg_intf_desc.bNumEndpoints = i; ++ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; ++ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; ++ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ if (gadget_is_dualspeed(gadget)) { ++ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_hs_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_hs_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_hs_intr_in_desc.bEndpointAddress = ++ fsg_fs_intr_in_desc.bEndpointAddress; ++ } ++ ++ if (gadget_is_superspeed(gadget)) { ++ unsigned max_burst; ++ ++ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Calculate bMaxBurst, we know packet size is 1024 */ ++ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_ss_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; ++ ++ fsg_ss_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; ++ } ++ ++ if (gadget_is_otg(gadget)) ++ fsg_otg_desc.bmAttributes |= USB_OTG_HNP; ++ ++ rc = -ENOMEM; ++ ++ /* Allocate the request and buffer for endpoint 0 */ ++ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); ++ if (!req) ++ goto out; ++ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); ++ if (!req->buf) ++ goto out; ++ req->complete = ep0_complete; ++ ++ /* Allocate the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ /* Allocate for the bulk-in endpoint. We assume that ++ * the buffer will also work with the bulk-out (and ++ * interrupt-in) endpoint. */ ++ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); ++ if (!bh->buf) ++ goto out; ++ bh->next = bh + 1; ++ } ++ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; ++ ++ /* This should reflect the actual gadget power source */ ++ usb_gadget_set_selfpowered(gadget); ++ ++ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, ++ "%s %s with %s", ++ init_utsname()->sysname, init_utsname()->release, ++ gadget->name); ++ ++ fsg->thread_task = kthread_create(fsg_main_thread, fsg, ++ "file-storage-gadget"); ++ if (IS_ERR(fsg->thread_task)) { ++ rc = PTR_ERR(fsg->thread_task); ++ goto out; ++ } ++ ++ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); ++ INFO(fsg, "NOTE: This driver is deprecated. " ++ "Consider using g_mass_storage instead.\n"); ++ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); ++ ++ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (fsg_lun_is_open(curlun)) { ++ p = NULL; ++ if (pathbuf) { ++ p = d_path(&curlun->filp->f_path, ++ pathbuf, PATH_MAX); ++ if (IS_ERR(p)) ++ p = NULL; ++ } ++ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", ++ curlun->ro, curlun->nofua, (p ? p : "(error)")); ++ } ++ } ++ kfree(pathbuf); ++ ++ DBG(fsg, "transport=%s (x%02x)\n", ++ mod_data.transport_name, mod_data.transport_type); ++ DBG(fsg, "protocol=%s (x%02x)\n", ++ mod_data.protocol_name, mod_data.protocol_type); ++ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", ++ mod_data.vendor, mod_data.product, mod_data.release); ++ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", ++ mod_data.removable, mod_data.can_stall, ++ mod_data.cdrom, mod_data.buflen); ++ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); ++ ++ set_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* Tell the thread to start working */ ++ wake_up_process(fsg->thread_task); ++ return 0; ++ ++autoconf_fail: ++ ERROR(fsg, "unable to autoconfigure all endpoints\n"); ++ rc = -ENOTSUPP; ++ ++out: ++ fsg->state = FSG_STATE_TERMINATED; // The thread is dead ++ fsg_unbind(gadget); ++ complete(&fsg->thread_notifier); ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_suspend(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "suspend\n"); ++ set_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++static void fsg_resume(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "resume\n"); ++ clear_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver fsg_driver = { ++ .max_speed = USB_SPEED_SUPER, ++ .function = (char *) fsg_string_product, ++ .unbind = fsg_unbind, ++ .disconnect = fsg_disconnect, ++ .setup = fsg_setup, ++ .suspend = fsg_suspend, ++ .resume = fsg_resume, ++ ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ // .release = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++ ++static int __init fsg_alloc(void) ++{ ++ struct fsg_dev *fsg; ++ ++ fsg = kzalloc(sizeof *fsg + ++ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); ++ ++ if (!fsg) ++ return -ENOMEM; ++ spin_lock_init(&fsg->lock); ++ init_rwsem(&fsg->filesem); ++ kref_init(&fsg->ref); ++ init_completion(&fsg->thread_notifier); ++ ++ the_fsg = fsg; ++ return 0; ++} ++ ++ ++static int __init fsg_init(void) ++{ ++ int rc; ++ struct fsg_dev *fsg; ++ ++ rc = fsg_num_buffers_validate(); ++ if (rc != 0) ++ return rc; ++ ++ if ((rc = fsg_alloc()) != 0) ++ return rc; ++ fsg = the_fsg; ++ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) ++ kref_put(&fsg->ref, fsg_release); ++ return rc; ++} ++module_init(fsg_init); ++ ++ ++static void __exit fsg_cleanup(void) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ ++ /* Unregister the driver iff the thread hasn't already done so */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Wait for the thread to finish up */ ++ wait_for_completion(&fsg->thread_notifier); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++module_exit(fsg_cleanup); +diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig +index 0b80cee30da4..f17b939c1495 100644 +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -762,6 +762,19 @@ config USB_HWA_HCD + To compile this driver a module, choose M here: the module + will be called "hwa-hc". + ++config USB_DWCOTG ++ tristate "Synopsis DWC host support" ++ depends on USB ++ help ++ The Synopsis DWC controller is a dual-role ++ host/peripheral/OTG ("On The Go") USB controllers. ++ ++ Enable this option to support this IP in host controller mode. ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ modules built will be called dwc_otg and dwc_common_port. ++ + config USB_IMX21_HCD + tristate "i.MX21 HCD support" + depends on ARM && ARCH_MXC +diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile +index 6ef785b0ea8f..c28acc1b2877 100644 +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -74,6 +74,8 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o + obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ + obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o + obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o +diff --git a/drivers/usb/host/dwc_common_port/Makefile b/drivers/usb/host/dwc_common_port/Makefile +new file mode 100644 +index 000000000000..f10d466d1aea +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile +@@ -0,0 +1,58 @@ ++# ++# Makefile for DWC_common library ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++ccflags-y += -DDWC_LINUX ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_DEBUG_REGS ++#ccflags-y += -DDWC_DEBUG_MEMORY ++ ++ccflags-y += -DDWC_LIBMODULE ++ccflags-y += -DDWC_CCLIB ++#ccflags-y += -DDWC_CRYPTOLIB ++ccflags-y += -DDWC_NOTIFYLIB ++ccflags-y += -DDWC_UTFLIB ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++# grayg - I only know that we use ccflags-y in 2.6.31 actually ++ccflags-y += $(CPPFLAGS) ++endif ++ ++else ++ ++#ifeq ($(KDIR),) ++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++#endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +diff --git a/drivers/usb/host/dwc_common_port/Makefile.fbsd b/drivers/usb/host/dwc_common_port/Makefile.fbsd +new file mode 100644 +index 000000000000..45db9915b9d3 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd +@@ -0,0 +1,17 @@ ++CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include ++CFLAGS += -DDWC_FREEBSD ++CFLAGS += -DDEBUG ++#CFLAGS += -DDWC_DEBUG_REGS ++#CFLAGS += -DDWC_DEBUG_MEMORY ++ ++#CFLAGS += -DDWC_LIBMODULE ++#CFLAGS += -DDWC_CCLIB ++#CFLAGS += -DDWC_CRYPTOLIB ++#CFLAGS += -DDWC_NOTIFYLIB ++#CFLAGS += -DDWC_UTFLIB ++ ++KMOD = dwc_common_port_lib ++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \ ++ dwc_common_fbsd.c dwc_mem.c ++ ++.include +diff --git a/drivers/usb/host/dwc_common_port/Makefile.linux b/drivers/usb/host/dwc_common_port/Makefile.linux +new file mode 100644 +index 000000000000..0cef7b461bd5 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.linux +@@ -0,0 +1,49 @@ ++# ++# Makefile for DWC_common library ++# ++ifneq ($(KERNELRELEASE),) ++ ++ccflags-y += -DDWC_LINUX ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_DEBUG_REGS ++#ccflags-y += -DDWC_DEBUG_MEMORY ++ ++ccflags-y += -DDWC_LIBMODULE ++ccflags-y += -DDWC_CCLIB ++ccflags-y += -DDWC_CRYPTOLIB ++ccflags-y += -DDWC_NOTIFYLIB ++ccflags-y += -DDWC_UTFLIB ++ ++obj-m := dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++else ++ ++ifeq ($(KDIR),) ++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +diff --git a/drivers/usb/host/dwc_common_port/changes.txt b/drivers/usb/host/dwc_common_port/changes.txt +new file mode 100644 +index 000000000000..f6839f92c276 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/changes.txt +@@ -0,0 +1,174 @@ ++ ++dwc_read_reg32() and friends now take an additional parameter, a pointer to an ++IO context struct. The IO context struct should live in an os-dependent struct ++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct ++named 'os_dep' embedded in the main device struct. So there these calls look ++like this: ++ ++ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg); ++ ++ dwc_write_reg32(&usb3_dev->os_dep.ioctx, ++ &pcd->dev_global_regs->dcfg, 0); ++ ++Note that for the existing Linux driver ports, it is not necessary to actually ++define the 'ioctx' member in the os-dependent struct. Since Linux does not ++require an IO context, its macros for dwc_read_reg32() and friends do not ++use the context pointer, so it is optimized away by the compiler. But it is ++necessary to add the pointer parameter to all of the call sites, to be ready ++for any future ports (such as FreeBSD) which do require an IO context. ++ ++ ++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now ++take an additional parameter, a pointer to a memory context. Examples: ++ ++ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size); ++ ++ dwc_free(&usb3_dev->os_dep.memctx, addr); ++ ++Again, for the Linux ports, it is not necessary to actually define the memctx ++member, but it is necessary to add the pointer parameter to all of the call ++sites. ++ ++ ++Same for dwc_dma_alloc() and dwc_dma_free(). Examples: ++ ++ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr); ++ ++ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr); ++ ++ ++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples: ++ ++ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx); ++ ++ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex); ++ ++ ++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples: ++ ++ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx); ++ ++ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock); ++ ++ ++Same for dwc_timer_alloc(). Example: ++ ++ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1", ++ cb_func, cb_data); ++ ++ ++Same for dwc_waitq_alloc(). Example: ++ ++ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx); ++ ++ ++Same for dwc_thread_run(). Example: ++ ++ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func, ++ "dwc_usb3_thd1", data); ++ ++ ++Same for dwc_workq_alloc(). Example: ++ ++ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1"); ++ ++ ++Same for dwc_task_alloc(). Example: ++ ++ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1", ++ cb_func, cb_data); ++ ++ ++In addition to the context pointer additions, a few core functions have had ++other changes made to their parameters: ++ ++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore() ++has been changed from a uint64_t to a dwc_irqflags_t. ++ ++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the ++FreeBSD equivalent of that function requires it. ++ ++And, in addition to the context pointer, dwc_task_alloc() also adds a ++'char *name' parameter, to be consistent with dwc_thread_run() and ++dwc_workq_alloc(), and because the FreeBSD equivalent of that function ++requires a unique name. ++ ++ ++Here is a complete list of the core functions that now take a pointer to a ++context as their first parameter: ++ ++ dwc_read_reg32 ++ dwc_read_reg64 ++ dwc_write_reg32 ++ dwc_write_reg64 ++ dwc_modify_reg32 ++ dwc_modify_reg64 ++ dwc_alloc ++ dwc_alloc_atomic ++ dwc_strdup ++ dwc_free ++ dwc_dma_alloc ++ dwc_dma_free ++ dwc_mutex_alloc ++ dwc_mutex_free ++ dwc_spinlock_alloc ++ dwc_spinlock_free ++ dwc_timer_alloc ++ dwc_waitq_alloc ++ dwc_thread_run ++ dwc_workq_alloc ++ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter ++ ++And here are the core functions that have other changes to their parameters: ++ ++ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *' ++ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t' ++ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter ++ ++ ++ ++The changes to the core functions also require some of the other library ++functions to change: ++ ++ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx' ++ (for memory allocation) as the 1st param and a 'void *mtxctx' ++ (for mutex allocation) as the 2nd param. ++ ++ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(), ++ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_modpow() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_alloc_notification_manager() now takes a 'void *memctx' as the ++ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures or work queue fails. ++ ++ dwc_register_notifier() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures fails. ++ ++ ++ ++Other miscellaneous changes: ++ ++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to ++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS. ++ ++The following #define's have been added to allow selectively compiling library ++features: ++ ++ DWC_CCLIB ++ DWC_CRYPTOLIB ++ DWC_NOTIFYLIB ++ DWC_UTFLIB ++ ++A DWC_LIBMODULE #define has also been added. If this is not defined, then the ++module code in dwc_common_linux.c is not compiled in. This allows linking the ++library code directly into a driver module, instead of as a standalone module. +diff --git a/drivers/usb/host/dwc_common_port/doc/doxygen.cfg b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg +new file mode 100644 +index 000000000000..89aa887af29d +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg +@@ -0,0 +1,270 @@ ++# Doxyfile 1.4.5 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB" ++PROJECT_NUMBER = ++OUTPUT_DIRECTORY = doc ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = YES ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = .. ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++DETAILS_AT_TOP = YES ++INHERIT_DOCS = YES ++SEPARATE_MEMBER_PAGES = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++BUILTIN_STL_SUPPORT = NO ++DISTRIBUTE_GROUP_DOC = NO ++SUBGROUPING = NO ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = NO ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = NO ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = YES ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = NO ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++FILE_VERSION_FILTER = ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_NO_PARAMDOC = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.cc \ ++ *.cxx \ ++ *.cpp \ ++ *.c++ \ ++ *.d \ ++ *.java \ ++ *.ii \ ++ *.ixx \ ++ *.ipp \ ++ *.i++ \ ++ *.inl \ ++ *.h \ ++ *.hh \ ++ *.hxx \ ++ *.hpp \ ++ *.h++ \ ++ *.idl \ ++ *.odl \ ++ *.cs \ ++ *.php \ ++ *.php3 \ ++ *.inc \ ++ *.m \ ++ *.mm \ ++ *.dox \ ++ *.py \ ++ *.C \ ++ *.CC \ ++ *.C++ \ ++ *.II \ ++ *.I++ \ ++ *.H \ ++ *.HH \ ++ *.H++ \ ++ *.CS \ ++ *.PHP \ ++ *.PHP3 \ ++ *.M \ ++ *.MM \ ++ *.PY ++RECURSIVE = NO ++EXCLUDE = ++EXCLUDE_SYMLINKS = NO ++EXCLUDE_PATTERNS = ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = NO ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = YES ++REFERENCES_RELATION = YES ++USE_HTAGS = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = NO ++EXPAND_ONLY_PREDEF = NO ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEBUG DEBUG_MEMORY ++EXPAND_AS_DEFINED = ++SKIP_FUNCTION_MACROS = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++GROUP_GRAPHS = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = NO ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DIRECTORY_GRAPH = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++DOT_TRANSPARENT = NO ++DOT_MULTI_TARGETS = NO ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +diff --git a/drivers/usb/host/dwc_common_port/dwc_cc.c b/drivers/usb/host/dwc_common_port/dwc_cc.c +new file mode 100644 +index 000000000000..5ec2ae28698c +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.c +@@ -0,0 +1,532 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $ ++ * $Revision: #4 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621692 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CCLIB ++ ++#include "dwc_cc.h" ++ ++typedef struct dwc_cc ++{ ++ uint32_t uid; ++ uint8_t chid[16]; ++ uint8_t cdid[16]; ++ uint8_t ck[16]; ++ uint8_t *name; ++ uint8_t length; ++ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; ++} dwc_cc_t; ++ ++DWC_CIRCLEQ_HEAD(context_list, dwc_cc); ++ ++/** The main structure for CC management. */ ++struct dwc_cc_if ++{ ++ dwc_mutex_t *mutex; ++ char *filename; ++ ++ unsigned is_host:1; ++ ++ dwc_notifier_t *notifier; ++ ++ struct context_list list; ++}; ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; ilength = length; ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ dwc_free(mem_ctx, cc); ++ return NULL; ++ } ++ ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ return cc; ++} ++ ++static void free_cc(void *mem_ctx, dwc_cc_t *cc) ++{ ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ dwc_free(mem_ctx, cc); ++} ++ ++static uint32_t next_uid(dwc_cc_if_t *cc_if) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid > uid) { ++ uid = cc->uid; ++ } ++ } ++ ++ if (uid == 0) { ++ uid = 255; ++ } ++ ++ return uid + 1; ++} ++ ++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) ++{ ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid == uid) { ++ return cc; ++ } ++ } ++ return NULL; ++} ++ ++static unsigned int cc_data_size(dwc_cc_if_t *cc_if) ++{ ++ unsigned int size = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ size += (48 + 1); ++ if (cc->name) { ++ size += cc->length; ++ } ++ } ++ return size; ++} ++ ++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++ ++/* Internal cc_add */ ++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t *cc; ++ uint32_t uid; ++ ++ if (cc_if->is_host) { ++ uid = cc_match_cdid(cc_if, cdid); ++ } ++ else { ++ uid = cc_match_chid(cc_if, chid); ++ } ++ ++ if (uid) { ++ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); ++ cc = cc_find(cc_if, uid); ++ } ++ else { ++ cc = alloc_cc(mem_ctx, name, length); ++ cc->uid = next_uid(cc_if); ++ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); ++ } ++ ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ ++ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); ++ dump_bytes("CHID", cc->chid, 16); ++ dump_bytes("CDID", cc->cdid, 16); ++ dump_bytes("CK", cc->ck, 16); ++ return cc->uid; ++} ++ ++/* Internal cc_clear */ ++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { ++ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ free_cc(mem_ctx, cc); ++ } ++} ++ ++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host) ++{ ++ dwc_cc_if_t *cc_if = NULL; ++ ++ /* Allocate a common_cc_if structure */ ++ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t)); ++ ++ if (!cc_if) ++ return NULL; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); ++#else ++ cc_if->mutex = dwc_mutex_alloc(mtx_ctx); ++#endif ++ if (!cc_if->mutex) { ++ dwc_free(mem_ctx, cc_if); ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(&cc_if->list); ++ cc_if->is_host = is_host; ++ cc_if->notifier = notifier; ++ return cc_if; ++} ++ ++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if) ++{ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_FREE(cc_if->mutex); ++#else ++ dwc_mutex_free(mtx_ctx, cc_if->mutex); ++#endif ++ cc_clear(mem_ctx, cc_if); ++ dwc_free(mem_ctx, cc_if); ++} ++ ++static void cc_changed(dwc_cc_if_t *cc_if) ++{ ++ if (cc_if->notifier) { ++ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); ++ } ++} ++ ++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++} ++ ++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ uint32_t uid; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++ ++ return uid; ++} ++ ++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t* cc; ++ ++ DWC_DEBUGC("Change connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ if (chid) { ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ } ++ if (cdid) { ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ } ++ if (ck) { ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ } ++ ++ if (name) { ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ DWC_ERROR("Out of memory in dwc_cc_change()\n"); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ cc->length = length; ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++ ++ DWC_DEBUGC("Changed connection context id=%d\n", id); ++ dump_bytes("New CHID", cc->chid, 16); ++ dump_bytes("New CDID", cc->cdid, 16); ++ dump_bytes("New CK", cc->ck, 16); ++} ++ ++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id) ++{ ++ dwc_cc_t *cc; ++ ++ DWC_DEBUGC("Removing connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ free_cc(mem_ctx, cc); ++ ++ cc_changed(cc_if); ++} ++ ++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length) ++{ ++ uint8_t *buf, *x; ++ uint8_t zero = 0; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = cc_data_size(cc_if); ++ if (!(*length)) { ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ DWC_DEBUGC("Creating data for saving (length=%d)", *length); ++ ++ buf = dwc_alloc(mem_ctx, *length); ++ if (!buf) { ++ *length = 0; ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ x = buf; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ DWC_MEMCPY(x, cc->chid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->cdid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->ck, 16); ++ x += 16; ++ if (cc->name) { ++ DWC_MEMCPY(x, &cc->length, 1); ++ x += 1; ++ DWC_MEMCPY(x, cc->name, cc->length); ++ x += cc->length; ++ } ++ else { ++ DWC_MEMCPY(x, &zero, 1); ++ x += 1; ++ } ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return buf; ++} ++ ++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) ++{ ++ uint8_t name_length; ++ uint8_t *name; ++ uint8_t *chid; ++ uint8_t *cdid; ++ uint8_t *ck; ++ uint32_t i = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ ++ while (i < length) { ++ chid = &data[i]; ++ i += 16; ++ cdid = &data[i]; ++ i += 16; ++ ck = &data[i]; ++ i += 16; ++ ++ name_length = data[i]; ++ i ++; ++ ++ if (name_length) { ++ name = &data[i]; ++ i += name_length; ++ } ++ else { ++ name = NULL; ++ } ++ ++ /* check to see if we haven't overflown the buffer */ ++ if (i > length) { ++ DWC_ERROR("Data format error while attempting to load CCs " ++ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length); ++ break; ++ } ++ ++ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length); ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++} ++ ++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_chid(cc_if, chid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_cdid(cc_if, cdid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++ ++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *ck = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ ck = cc->ck; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return ck; ++ ++} ++ ++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->chid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->cdid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = 0; ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ *length = cc->length; ++ retval = cc->name; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++#endif /* DWC_CCLIB */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_cc.h b/drivers/usb/host/dwc_common_port/dwc_cc.h +new file mode 100644 +index 000000000000..f86e6f21792b +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.h +@@ -0,0 +1,224 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $ ++ * $Revision: #4 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_CC_H_ ++#define _DWC_CC_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file defines the Context Context library. ++ * ++ * The main data structure is dwc_cc_if_t which is returned by either the ++ * dwc_cc_if_alloc function or returned by the module to the user via a provided ++ * function. The data structure is opaque and should only be manipulated via the ++ * functions provied in this API. ++ * ++ * It manages a list of connection contexts and operations can be performed to ++ * add, remove, query, search, and change, those contexts. Additionally, ++ * a dwc_notifier_t object can be requested from the manager so that ++ * the user can be notified whenever the context list has changed. ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++#include "dwc_notifier.h" ++ ++ ++/* Notifications */ ++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" ++ ++struct dwc_cc_if; ++typedef struct dwc_cc_if dwc_cc_if_t; ++ ++ ++/** @name Connection Context Operations */ ++/** @{ */ ++ ++/** This function allocates memory for a dwc_cc_if_t structure, initializes ++ * fields to default values, and returns a pointer to the structure or NULL on ++ * error. */ ++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host); ++ ++/** Frees the memory for the specified CC structure allocated from ++ * dwc_cc_if_alloc(). */ ++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if); ++ ++/** Removes all contexts from the connection context list */ ++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if); ++ ++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. ++ * If a CHID already exists, the CK and name are overwritten. Statistics are ++ * not overwritten. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. ++ * @param name An optional host friendly name as defined in the association model ++ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. ++ * @param length The length othe unicode string. ++ * @return A unique identifier used to refer to this context that is valid for ++ * as long as this context is still in the list. */ ++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, ++ uint8_t length); ++ ++/** Changes the CHID, CK, CDID, or Name values of a connection context in the ++ * list, preserving any accumulated statistics. This would typically be called ++ * if the host decideds to change the context with a SET_CONNECTION request. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL ++ * indicates no change. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL ++ * indicates no change. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL ++ * indicates no change. ++ * @param name Host friendly name UTF16-LE. NULL indicates no change. ++ * @param length Length of name. */ ++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, ++ uint8_t *chid, uint8_t *cdid, uint8_t *ck, ++ uint8_t *name, uint8_t length); ++ ++/** Remove the specified connection context. ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context to remove. */ ++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Get a binary block of data for the connection context list and attributes. ++ * This data can be used by the OS specific driver to save the connection ++ * context list into non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param length Return the length of the data buffer. ++ * @return A pointer to the data buffer. The memory for this buffer should be ++ * freed with DWC_FREE() after use. */ ++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, ++ unsigned int *length); ++ ++/** Restore the connection context list from the binary data that was previously ++ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific ++ * driver to load a connection context list from non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param data The data bytes as returned from dwc_cc_data_for_save. ++ * @param length The length of the data. */ ++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, ++ uint8_t *data, unsigned int length); ++ ++/** Find the connection context from the specified CHID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the CHID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); ++ ++/** Find the connection context from the specified CDID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param cdid A pointer to the CDID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); ++ ++/** Retrieve the CK from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CK data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CHID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CHID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CDID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CDID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); ++ ++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); ++ ++/** Checks a buffer for non-zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is non-zero. */ ++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { ++ int i; ++ for (i=0; i<16; i++) { ++ if (id[i]) return 1; ++ } ++ return 0; ++} ++ ++/** Checks a buffer for zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is zero. */ ++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { ++ return !dwc_assoc_is_not_zero_id(id); ++} ++ ++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into ++ * buffer. */ ++static inline int dwc_print_id_string(char *buffer, uint8_t *id) { ++ char *ptr = buffer; ++ int i; ++ for (i=0; i<16; i++) { ++ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); ++ if (i < 15) { ++ ptr += DWC_SPRINTF(ptr, " "); ++ } ++ } ++ return ptr - buffer; ++} ++ ++/** @} */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CC_H_ */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c +new file mode 100644 +index 000000000000..6dd04b58f8f6 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c +@@ -0,0 +1,1308 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) ++{ ++ if (error) ++ return; ++ *(bus_addr_t *)arg = segs[0].ds_addr; ++} ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dma_tag_create( ++#if __FreeBSD_version >= 700000 ++ bus_get_dma_tag(dma->dev), /* parent */ ++#else ++ NULL, /* parent */ ++#endif ++ 4, 0, /* alignment, bounds */ ++ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ ++ BUS_SPACE_MAXADDR, /* highaddr */ ++ NULL, NULL, /* filter, filterarg */ ++ size, /* maxsize */ ++ 1, /* nsegments */ ++ size, /* maxsegsize */ ++ 0, /* flags */ ++ NULL, /* lockfunc */ ++ NULL, /* lockarg */ ++ &dma->dma_tag); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n", ++ __func__, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n", ++ __func__, (uintmax_t)size, error); ++ goto fail_1; ++ } ++ ++ dma->dma_paddr = 0; ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size, ++ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT); ++ if (error || dma->dma_paddr == 0) { ++ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n", ++ __func__, error); ++ goto fail_2; ++ } ++ ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_2: ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ bus_dma_tag_destroy(dma->dma_tag); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_tag = NULL; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_tag == NULL) ++ return; ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ dma->dma_map = NULL; ++ } ++ ++ bus_dma_tag_destroy(dma->dma_tag); ++ dma->dma_tag = NULL; ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct mtx *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ mtx_init(sl, "dw3spn", NULL, MTX_SPIN); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct mtx *sl = (struct mtx *)lock; ++ ++ mtx_destroy(sl); ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_lock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_unlock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ mtx_lock_spin((struct mtx *)lock); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ mtx_unlock_spin((struct mtx *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mtx *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ m = (struct mtx *)mutex; ++ mtx_init(m, "dw3mtx", NULL, MTX_DEF); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mtx_destroy((struct mtx *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ return mtx_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ pause("dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t, 1); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct mtx lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ mtx_destroy(&wq->lock); ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++// intrmask_t ipl; ++ int result = 0; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout ++// ipl = splbio(); ++ } ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else if (wq->abort) { ++ result = -DWC_E_ABORT; ++ ++ } else { ++ result = 0; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++// intrmask_t ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ getmicrouptime(&tv1); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv)); ++ getmicrouptime(&tv2); ++// ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ result = -DWC_E_ABORT; ++ } else { ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++// intrmask_t ipl; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create((void (*)(void *))func, data, &thread->proc, ++ RFPROC | RFNOWAIT, 0, "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ] ++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ] ++ */ ++struct dwc_tasklet { ++ struct task t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data, int pending) // what to do with pending ??? ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ TASK_INIT(&task->t, 0, tasklet_callback, task); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ taskqueue_drain(taskqueue_fast, &task->t); // ??? ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ /* Uses predefined system queue */ ++ taskqueue_enqueue_fast(taskqueue_fast, &task->t); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct task task; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct taskqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(void *data, int pending) // what to do with pending ??? ++{ ++ work_container_t *container = (work_container_t *)data; ++ dwc_workq_t *wq = container->wq; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ pause("dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq); ++ if (!wq->taskq) { ++ DWC_ERROR("Cannot allocate memory for taskqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk"); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ taskqueue_free(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ taskqueue_free(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +diff --git a/drivers/usb/host/dwc_common_port/dwc_common_linux.c b/drivers/usb/host/dwc_common_port/dwc_common_linux.c +new file mode 100644 +index 000000000000..0d641e6da24b +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c +@@ -0,0 +1,1418 @@ ++#include ++#include ++#include ++#include ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the Linux kernel implementation of the DWC platform library. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include ++#else ++# include ++#endif ++ ++#include ++#include ++#include ++#include ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ return memmove(dest, src, size); ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(const char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(const char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++ return in_irq(); ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++ return in_softirq(); ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintk(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_WARNING); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++ BUG_ON(1); ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_DEBUG); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_KERNEL | GFP_DMA32); ++} ++ ++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_ATOMIC); ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_KERNEL); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_ATOMIC); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ kfree(addr); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(uint32_t volatile *reg) ++{ ++ return readl(reg); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(uint64_t volatile *reg) ++{ ++} ++#endif ++ ++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) ++{ ++ writel(value, reg); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) ++{ ++} ++#endif ++ ++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) ++{ ++ writel((readl(reg) & ~clear_mask) | set_mask, reg); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask) ++{ ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ spinlock_t *sl = (spinlock_t *)1; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ sl = DWC_ALLOC(sizeof(*sl)); ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock\n"); ++ return NULL; ++ } ++ ++ spin_lock_init(sl); ++#endif ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ DWC_FREE(lock); ++#endif ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ dwc_irqflags_t f; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock_irqsave((spinlock_t *)lock, f); ++#else ++ local_irq_save(f); ++#endif ++ *flags = f; ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock_irqrestore((spinlock_t *)lock, flags); ++#else ++ local_irq_restore(flags); ++#endif ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mutex *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex\n"); ++ return NULL; ++ } ++ ++ m = (struct mutex *)mutex; ++ mutex_init(m); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mutex_destroy((struct mutex *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ return mutex_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ udelay(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ mdelay(msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ msleep(msecs); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ return jiffies_to_msecs(jiffies); ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct timer_list *t; ++ char *name; ++ dwc_timer_callback_t cb; ++ void *data; ++ uint8_t scheduled; ++ dwc_spinlock_t *lock; ++}; ++ ++static void timer_callback(unsigned long data) ++{ ++ dwc_timer_t *timer = (dwc_timer_t *)data; ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ timer->scheduled = 0; ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_DEBUGC("Timer %s callback", timer->name); ++ timer->cb(timer->data); ++} ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ t->t = DWC_ALLOC(sizeof(*t->t)); ++ if (!t->t) { ++ DWC_ERROR("Cannot allocate memory for timer->t"); ++ goto no_timer; ++ } ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(t->lock); ++#else ++ t->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->scheduled = 0; ++ t->t->expires = jiffies; ++ setup_timer(t->t, timer_callback, (unsigned long)t); ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t->t); ++ no_timer: ++ DWC_FREE(t); ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (timer->scheduled) { ++ del_timer(timer->t); ++ timer->scheduled = 0; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->t); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (!timer->scheduled) { ++ timer->scheduled = 1; ++ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time); ++ timer->t->expires = jiffies + msecs_to_jiffies(time); ++ add_timer(timer->t); ++ } else { ++ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time); ++ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ del_timer(timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ wait_queue_head_t queue; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue\n"); ++ return NULL; ++ } ++ ++ init_waitqueue_head(&wq->queue); ++ wq->abort = 0; ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int result = wait_event_interruptible(wq->queue, ++ cond(data) || wq->abort); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result == 0) { ++ return 0; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ int32_t tmsecs; ++ int result = wait_event_interruptible_timeout(wq->queue, ++ cond(data) || wq->abort, ++ msecs_to_jiffies(msecs)); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result > 0) { ++ tmsecs = jiffies_to_msecs(result); ++ if (!tmsecs) { ++ return 1; ++ } ++ ++ return tmsecs; ++ } ++ ++ if (result == 0) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wq->abort = 0; ++ wake_up_interruptible(&wq->queue); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ wq->abort = 1; ++ wake_up_interruptible(&wq->queue); ++} ++ ++ ++/* Threading */ ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ struct task_struct *thread = kthread_run(func, data, name); ++ ++ if (thread == ERR_PTR(-ENOMEM)) { ++ return NULL; ++ } ++ ++ return (dwc_thread_t *)thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ return kthread_stop((struct task_struct *)thread); ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(void) ++{ ++ return kthread_should_stop(); ++} ++ ++ ++/* tasklets ++ - run in interrupt context (cannot sleep) ++ - each tasklet runs on a single CPU ++ - different tasklets can be running simultaneously on different CPUs ++ */ ++struct dwc_tasklet { ++ struct tasklet_struct t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(unsigned long data) ++{ ++ dwc_tasklet_t *t = (dwc_tasklet_t *)data; ++ t->cb(t->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (t) { ++ t->cb = cb; ++ t->data = data; ++ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet\n"); ++ } ++ ++ return t; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_schedule(&task->t); ++} ++ ++void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_hi_schedule(&task->t); ++} ++ ++ ++/* workqueues ++ - run in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct delayed_work work; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct workqueue_struct *wq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(struct work_struct *work) ++{ ++ dwc_irqflags_t flags; ++ struct delayed_work *dw = container_of(work, struct delayed_work, work); ++ work_container_t *container = container_of(dw, struct work_container, work); ++ dwc_workq_t *wq = container->wq; ++ ++ container->cb(container->data); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ DWC_DEBUGC("Work done: %s, container=%p", container->name, container); ++ if (container->name) { ++ DWC_FREE(container->name); ++ } ++ DWC_FREE(container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ return NULL; ++ } ++ ++ wq->wq = create_singlethread_workqueue(name); ++ if (!wq->wq) { ++ goto no_wq; ++ } ++ ++ wq->pending = 0; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(wq->lock); ++#else ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ if (!wq->lock) { ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ goto no_waitq; ++ } ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ destroy_workqueue(wq->wq); ++ no_wq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ if (wq->pending != 0) { ++ struct work_container *wc; ++ DWC_ERROR("Destroying work queue with pending work"); ++ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", wc->name); ++ } ++ } ++#endif ++ destroy_workqueue(wq->wq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_WORK(&container->work.work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_work(wq->wq, &container->work.work); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_DELAYED_WORK(&container->work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} ++ ++ ++#ifdef DWC_LIBMODULE ++ ++#ifdef DWC_CCLIB ++/* CC */ ++EXPORT_SYMBOL(dwc_cc_if_alloc); ++EXPORT_SYMBOL(dwc_cc_if_free); ++EXPORT_SYMBOL(dwc_cc_clear); ++EXPORT_SYMBOL(dwc_cc_add); ++EXPORT_SYMBOL(dwc_cc_remove); ++EXPORT_SYMBOL(dwc_cc_change); ++EXPORT_SYMBOL(dwc_cc_data_for_save); ++EXPORT_SYMBOL(dwc_cc_restore_from_data); ++EXPORT_SYMBOL(dwc_cc_match_chid); ++EXPORT_SYMBOL(dwc_cc_match_cdid); ++EXPORT_SYMBOL(dwc_cc_ck); ++EXPORT_SYMBOL(dwc_cc_chid); ++EXPORT_SYMBOL(dwc_cc_cdid); ++EXPORT_SYMBOL(dwc_cc_name); ++#endif /* DWC_CCLIB */ ++ ++#ifdef DWC_CRYPTOLIB ++# ifndef CONFIG_MACH_IPMATE ++/* Modpow */ ++EXPORT_SYMBOL(dwc_modpow); ++ ++/* DH */ ++EXPORT_SYMBOL(dwc_dh_modpow); ++EXPORT_SYMBOL(dwc_dh_derive_keys); ++EXPORT_SYMBOL(dwc_dh_pk); ++# endif /* CONFIG_MACH_IPMATE */ ++ ++/* Crypto */ ++EXPORT_SYMBOL(dwc_wusb_aes_encrypt); ++EXPORT_SYMBOL(dwc_wusb_cmf); ++EXPORT_SYMBOL(dwc_wusb_prf); ++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_key); ++EXPORT_SYMBOL(dwc_wusb_gen_mic); ++#endif /* DWC_CRYPTOLIB */ ++ ++/* Notification */ ++#ifdef DWC_NOTIFYLIB ++EXPORT_SYMBOL(dwc_alloc_notification_manager); ++EXPORT_SYMBOL(dwc_free_notification_manager); ++EXPORT_SYMBOL(dwc_register_notifier); ++EXPORT_SYMBOL(dwc_unregister_notifier); ++EXPORT_SYMBOL(dwc_add_observer); ++EXPORT_SYMBOL(dwc_remove_observer); ++EXPORT_SYMBOL(dwc_notify); ++#endif ++ ++/* Memory Debugging Routines */ ++#ifdef DWC_DEBUG_MEMORY ++EXPORT_SYMBOL(dwc_alloc_debug); ++EXPORT_SYMBOL(dwc_alloc_atomic_debug); ++EXPORT_SYMBOL(dwc_free_debug); ++EXPORT_SYMBOL(dwc_dma_alloc_debug); ++EXPORT_SYMBOL(dwc_dma_free_debug); ++#endif ++ ++EXPORT_SYMBOL(DWC_MEMSET); ++EXPORT_SYMBOL(DWC_MEMCPY); ++EXPORT_SYMBOL(DWC_MEMMOVE); ++EXPORT_SYMBOL(DWC_MEMCMP); ++EXPORT_SYMBOL(DWC_STRNCMP); ++EXPORT_SYMBOL(DWC_STRCMP); ++EXPORT_SYMBOL(DWC_STRLEN); ++EXPORT_SYMBOL(DWC_STRCPY); ++EXPORT_SYMBOL(DWC_STRDUP); ++EXPORT_SYMBOL(DWC_ATOI); ++EXPORT_SYMBOL(DWC_ATOUI); ++ ++#ifdef DWC_UTFLIB ++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); ++#endif /* DWC_UTFLIB */ ++ ++EXPORT_SYMBOL(DWC_IN_IRQ); ++EXPORT_SYMBOL(DWC_IN_BH); ++EXPORT_SYMBOL(DWC_VPRINTF); ++EXPORT_SYMBOL(DWC_VSNPRINTF); ++EXPORT_SYMBOL(DWC_PRINTF); ++EXPORT_SYMBOL(DWC_SPRINTF); ++EXPORT_SYMBOL(DWC_SNPRINTF); ++EXPORT_SYMBOL(__DWC_WARN); ++EXPORT_SYMBOL(__DWC_ERROR); ++EXPORT_SYMBOL(DWC_EXCEPTION); ++ ++#ifdef DEBUG ++EXPORT_SYMBOL(__DWC_DEBUG); ++#endif ++ ++EXPORT_SYMBOL(__DWC_DMA_ALLOC); ++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_DMA_FREE); ++EXPORT_SYMBOL(__DWC_ALLOC); ++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_FREE); ++ ++#ifdef DWC_CRYPTOLIB ++EXPORT_SYMBOL(DWC_RANDOM_BYTES); ++EXPORT_SYMBOL(DWC_AES_CBC); ++EXPORT_SYMBOL(DWC_SHA256); ++EXPORT_SYMBOL(DWC_HMAC_SHA256); ++#endif ++ ++EXPORT_SYMBOL(DWC_CPU_TO_LE32); ++EXPORT_SYMBOL(DWC_CPU_TO_BE32); ++EXPORT_SYMBOL(DWC_LE32_TO_CPU); ++EXPORT_SYMBOL(DWC_BE32_TO_CPU); ++EXPORT_SYMBOL(DWC_CPU_TO_LE16); ++EXPORT_SYMBOL(DWC_CPU_TO_BE16); ++EXPORT_SYMBOL(DWC_LE16_TO_CPU); ++EXPORT_SYMBOL(DWC_BE16_TO_CPU); ++EXPORT_SYMBOL(DWC_READ_REG32); ++EXPORT_SYMBOL(DWC_WRITE_REG32); ++EXPORT_SYMBOL(DWC_MODIFY_REG32); ++ ++#if 0 ++EXPORT_SYMBOL(DWC_READ_REG64); ++EXPORT_SYMBOL(DWC_WRITE_REG64); ++EXPORT_SYMBOL(DWC_MODIFY_REG64); ++#endif ++ ++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); ++EXPORT_SYMBOL(DWC_SPINLOCK_FREE); ++EXPORT_SYMBOL(DWC_SPINLOCK); ++EXPORT_SYMBOL(DWC_SPINUNLOCK); ++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); ++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); ++EXPORT_SYMBOL(DWC_MUTEX_ALLOC); ++ ++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES)) ++EXPORT_SYMBOL(DWC_MUTEX_FREE); ++#endif ++ ++EXPORT_SYMBOL(DWC_MUTEX_LOCK); ++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); ++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); ++EXPORT_SYMBOL(DWC_UDELAY); ++EXPORT_SYMBOL(DWC_MDELAY); ++EXPORT_SYMBOL(DWC_MSLEEP); ++EXPORT_SYMBOL(DWC_TIME); ++EXPORT_SYMBOL(DWC_TIMER_ALLOC); ++EXPORT_SYMBOL(DWC_TIMER_FREE); ++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); ++EXPORT_SYMBOL(DWC_TIMER_CANCEL); ++EXPORT_SYMBOL(DWC_WAITQ_ALLOC); ++EXPORT_SYMBOL(DWC_WAITQ_FREE); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); ++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); ++EXPORT_SYMBOL(DWC_WAITQ_ABORT); ++EXPORT_SYMBOL(DWC_THREAD_RUN); ++EXPORT_SYMBOL(DWC_THREAD_STOP); ++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); ++EXPORT_SYMBOL(DWC_TASK_ALLOC); ++EXPORT_SYMBOL(DWC_TASK_FREE); ++EXPORT_SYMBOL(DWC_TASK_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); ++EXPORT_SYMBOL(DWC_WORKQ_ALLOC); ++EXPORT_SYMBOL(DWC_WORKQ_FREE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); ++EXPORT_SYMBOL(DWC_WORKQ_PENDING); ++ ++static int dwc_common_port_init_module(void) ++{ ++ int result = 0; ++ ++ printk(KERN_DEBUG "Module dwc_common_port init\n" ); ++ ++#ifdef DWC_DEBUG_MEMORY ++ result = dwc_memory_debug_start(NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_memory_debug_start() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++ result = dwc_alloc_notification_manager(NULL, NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_alloc_notification_manager() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ return result; ++} ++ ++static void dwc_common_port_exit_module(void) ++{ ++ printk(KERN_DEBUG "Module dwc_common_port exit\n" ); ++ ++#ifdef DWC_NOTIFYLIB ++ dwc_free_notification_manager(); ++#endif ++ ++#ifdef DWC_DEBUG_MEMORY ++ dwc_memory_debug_stop(); ++#endif ++} ++ ++module_init(dwc_common_port_init_module); ++module_exit(dwc_common_port_exit_module); ++ ++MODULE_DESCRIPTION("DWC Common Library - Portable version"); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE ("GPL"); ++ ++#endif /* DWC_LIBMODULE */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c +new file mode 100644 +index 000000000000..49b07e172264 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c +@@ -0,0 +1,1275 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul' ++ * should be equivalent on 2's complement machines ++ */ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs, ++ sizeof(dma->segs) / sizeof(dma->segs[0]), ++ &dma->nsegs, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__, ++ (uintmax_t)size, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size, ++ (caddr_t *)&dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT); ++ if (error) { ++ printf("%s: bus_dmamem_map failed: %d\n", __func__, error); ++ goto fail_1; ++ } ++ ++ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0, ++ BUS_DMA_NOWAIT, &dma->dma_map); ++ if (error) { ++ printf("%s: bus_dmamap_create failed: %d\n", __func__, error); ++ goto fail_2; ++ } ++ ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, ++ size, NULL, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamap_load failed: %d\n", __func__, error); ++ goto fail_3; ++ } ++ ++ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr; ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_3: ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++fail_2: ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++ dma->dma_paddr = 0; ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ } ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct simplelock *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ simple_lock_init(sl); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct simplelock *sl = (struct simplelock *)lock; ++ ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ simple_lock((struct simplelock *)lock); ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ simple_unlock((struct simplelock *)lock); ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ simple_lock((struct simplelock *)lock); ++ *flags = splbio(); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ splx(flags); ++ simple_unlock((struct simplelock *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ int status; ++ ++ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL); ++ return status == 0; ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_RELEASE, NULL); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ tsleep(&tv, 0, "dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for timer->lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct simplelock lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ simple_lock_init(&wq->lock); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int ipl; ++ int result = 0; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ result = -DWC_E_ABORT; ++ } else { ++ result = 0; ++ } ++ ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ } else { // signaled - must be EINTR ++ result = -DWC_E_ABORT; ++ } ++ } ++ ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++ int ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ getmicrouptime(&tv1); ++ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock); ++ getmicrouptime(&tv2); ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ result = -DWC_E_ABORT; ++ } else { ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ } ++ ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ int ipl; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++ splx(ipl); ++ simple_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create1((void (*)(void *))func, data, &thread->proc, ++ "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU ++ - Different tasklets can be running simultaneously on different CPUs ++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom- ++ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ] ++ */ ++struct dwc_tasklet { ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data) ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_callback(task); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ struct work task; ++} work_container_t; ++ ++struct dwc_workq { ++ struct workqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ struct work_container *container; ++}; ++ ++static void do_work(struct work *task, void *data) ++{ ++ dwc_workq_t *wq = (dwc_workq_t *)data; ++ work_container_t *container = wq->container; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ tsleep(container, 0, "dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ int result; ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/, ++ IPL_BIO, 0); ++ if (result) { ++ DWC_ERROR("Cannot create workqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ workqueue_destroy(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container = wq->container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ if (container && container->name) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ workqueue_destroy(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +diff --git a/drivers/usb/host/dwc_common_port/dwc_crypto.c b/drivers/usb/host/dwc_common_port/dwc_crypto.c +new file mode 100644 +index 000000000000..3b0353296148 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c +@@ -0,0 +1,308 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $ ++ * $Revision: #5 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++/** @file ++ * This file contains the WUSB cryptographic routines. ++ */ ++ ++#ifdef DWC_CRYPTOLIB ++ ++#include "dwc_crypto.h" ++#include "usb.h" ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; idst == src, then the bytes will be encrypted ++ * in-place. ++ * ++ * @return 0 on success, negative error code on error. ++ */ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst) ++{ ++ u8 block_t[16]; ++ DWC_MEMSET(block_t, 0, 16); ++ ++ return DWC_AES_CBC(src, 16, key, 16, block_t, dst); ++} ++ ++/** ++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec. ++ * This function takes a data string and returns the encrypted CBC ++ * Counter-mode MIC. ++ * ++ * @param key The 128-bit symmetric key. ++ * @param nonce The CCM nonce. ++ * @param label The unique 14-byte ASCII text label. ++ * @param bytes The byte array to be encrypted. ++ * @param len Length of the byte array. ++ * @param result Byte array to receive the 8-byte encrypted MIC. ++ */ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ u8 block_m[16]; ++ u8 block_x[16]; ++ u8 block_t[8]; ++ int idx, blkNum; ++ u16 la = (u16)(len + 14); ++ ++ /* Set the AES-128 key */ ++ //dwc_aes_setkey(tfm, key, 16); ++ ++ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */ ++ block_m[0] = 0x59; ++ for (idx = 0; idx < 13; idx++) ++ block_m[idx + 1] = nonce[idx]; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Produce the CBC IV */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_m, "CBC IV in: ", "\n", 0); ++ show_block(block_x, "CBC IV out:", "\n", 0); ++ ++ /* Fill block B1 from l(a) = Blen + 14, and A */ ++ block_x[0] ^= (u8)(la >> 8); ++ block_x[1] ^= (u8)la; ++ for (idx = 0; idx < 14; idx++) ++ block_x[idx + 2] ^= label[idx]; ++ show_block(block_x, "After xor: ", "b1\n", 16); ++ ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "b1\n", 16); ++ ++ idx = 0; ++ blkNum = 0; ++ ++ /* Fill remaining blocks with B */ ++ while (len-- > 0) { ++ block_x[idx] ^= *bytes++; ++ if (++idx >= 16) { ++ idx = 0; ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ blkNum++; ++ } ++ } ++ ++ /* Handle partial last block */ ++ if (idx > 0) { ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ } ++ ++ /* Save the MIC tag */ ++ DWC_MEMCPY(block_t, block_x, 8); ++ show_block(block_t, "MIC tag : ", NULL, 8); ++ ++ /* Fill block A0 from flags = 0x01, N, and counter = 0 */ ++ block_m[0] = 0x01; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Encrypt the counter */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_x, "CTR[MIC] : ", NULL, 8); ++ ++ /* XOR with MIC tag */ ++ for (idx = 0; idx < 8; idx++) { ++ block_t[idx] ^= block_x[idx]; ++ } ++ ++ /* Return result to caller */ ++ DWC_MEMCPY(result, block_t, 8); ++ show_block(result, "CCM-MIC : ", NULL, 8); ++ ++} ++ ++/** ++ * The PRF function described in section 6.5 of the WUSB spec. This function ++ * concatenates MIC values returned from dwc_cmf() to create a value of ++ * the requested length. ++ * ++ * @param prf_len Length of the PRF function in bits (64, 128, or 256). ++ * @param key, nonce, label, bytes, len Same as for dwc_cmf(). ++ * @param result Byte array to receive the result. ++ */ ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result) ++{ ++ int i; ++ ++ nonce[0] = 0; ++ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) { ++ dwc_wusb_cmf(key, nonce, label, bytes, len, result); ++ result += 8; ++ } ++} ++ ++/** ++ * Fills in CCM Nonce per the WUSB spec. ++ * ++ * @param[in] haddr Host address. ++ * @param[in] daddr Device address. ++ * @param[in] tkid Session Key(PTK) identifier. ++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written. ++ */ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce) ++{ ++ ++ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr); ++ ++ DWC_MEMSET(&nonce[0], 0, 16); ++ ++ DWC_MEMCPY(&nonce[6], tkid, 3); ++ nonce[9] = daddr & 0xFF; ++ nonce[10] = (daddr >> 8) & 0xFF; ++ nonce[11] = haddr & 0xFF; ++ nonce[12] = (haddr >> 8) & 0xFF; ++ ++ dump_bytes("CCM nonce", nonce, 16); ++} ++ ++/** ++ * Generates a 16-byte cryptographic-grade random number for the Host/Device ++ * Nonce. ++ */ ++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce) ++{ ++ uint8_t inonce[16]; ++ uint32_t temp[4]; ++ ++ /* Fill in the Nonce */ ++ DWC_MEMSET(&inonce[0], 0, sizeof(inonce)); ++ inonce[9] = addr & 0xFF; ++ inonce[10] = (addr >> 8) & 0xFF; ++ inonce[11] = inonce[9]; ++ inonce[12] = inonce[10]; ++ ++ /* Collect "randomness samples" */ ++ DWC_RANDOM_BYTES((uint8_t *)temp, 16); ++ ++ dwc_wusb_prf_128((uint8_t *)temp, nonce, ++ "Random Numbers", (uint8_t *)temp, sizeof(temp), ++ nonce); ++} ++ ++/** ++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the ++ * WUSB spec. ++ * ++ * @param[in] ccm_nonce Pointer to CCM Nonce. ++ * @param[in] mk Master Key to derive the session from ++ * @param[in] hnonce Pointer to Host Nonce. ++ * @param[in] dnonce Pointer to Device Nonce. ++ * @param[out] kck Pointer to where the KCK output is to be written. ++ * @param[out] ptk Pointer to where the PTK output is to be written. ++ */ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce, ++ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk) ++{ ++ uint8_t idata[32]; ++ uint8_t odata[32]; ++ ++ dump_bytes("ck", mk, 16); ++ dump_bytes("hnonce", hnonce, 16); ++ dump_bytes("dnonce", dnonce, 16); ++ ++ /* The data is the HNonce and DNonce concatenated */ ++ DWC_MEMCPY(&idata[0], hnonce, 16); ++ DWC_MEMCPY(&idata[16], dnonce, 16); ++ ++ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata); ++ ++ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */ ++ DWC_MEMCPY(kck, &odata[0], 16); ++ DWC_MEMCPY(ptk, &odata[16], 16); ++ ++ dump_bytes("kck", kck, 16); ++ dump_bytes("ptk", ptk, 16); ++} ++ ++/** ++ * Generates the Message Integrity Code over the Handshake data per the ++ * WUSB spec. ++ * ++ * @param ccm_nonce Pointer to CCM Nonce. ++ * @param kck Pointer to Key Confirmation Key. ++ * @param data Pointer to Handshake data to be checked. ++ * @param mic Pointer to where the MIC output is to be written. ++ */ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck, ++ uint8_t *data, uint8_t *mic) ++{ ++ ++ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC", ++ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic); ++} ++ ++#endif /* DWC_CRYPTOLIB */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_crypto.h b/drivers/usb/host/dwc_common_port/dwc_crypto.h +new file mode 100644 +index 000000000000..26fcddcfe9ba +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h +@@ -0,0 +1,111 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++#ifndef _DWC_CRYPTO_H_ ++#define _DWC_CRYPTO_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file contains declarations for the WUSB Cryptographic routines as ++ * defined in the WUSB spec. They are only to be used internally by the DWC UWB ++ * modules. ++ */ ++ ++#include "dwc_os.h" ++ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst); ++ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result); ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result); ++ ++/** ++ * The PRF-64 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(64, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-128 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(128, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-256 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(256, key, nonce, label, bytes, len, result); ++} ++ ++ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce); ++void dwc_wusb_gen_nonce(uint16_t addr, ++ uint8_t *nonce); ++ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, ++ uint8_t *hnonce, uint8_t *dnonce, ++ uint8_t *kck, uint8_t *ptk); ++ ++ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t ++ *kck, uint8_t *data, uint8_t *mic); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CRYPTO_H_ */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_dh.c b/drivers/usb/host/dwc_common_port/dwc_dh.c +new file mode 100644 +index 000000000000..2b429a32aaf0 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_dh.c +@@ -0,0 +1,291 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_dh.h" ++#include "dwc_modpow.h" ++ ++#ifdef DEBUG ++/* This function prints out a buffer in the format described in the Association ++ * Model specification. */ ++static void dh_dump(char *str, void *_num, int len) ++{ ++ uint8_t *num = _num; ++ int i; ++ DWC_PRINTF("%s\n", str); ++ for (i = 0; i < len; i ++) { ++ DWC_PRINTF("%02x", num[i]); ++ if (((i + 1) % 2) == 0) DWC_PRINTF(" "); ++ if (((i + 1) % 26) == 0) DWC_PRINTF("\n"); ++ } ++ ++ DWC_PRINTF("\n"); ++} ++#else ++#define dh_dump(_x...) do {; } while(0) ++#endif ++ ++/* Constant g value */ ++static __u32 dh_g[] = { ++ 0x02000000, ++}; ++ ++/* Constant p value */ ++static __u32 dh_p[] = { ++ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A, ++ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2, ++ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4, ++ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1, ++ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520, ++ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E, ++ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895, ++ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004, ++ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6, ++ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9, ++ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA, ++ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF, ++}; ++ ++static void dh_swap_bytes(void *_in, void *_out, uint32_t len) ++{ ++ uint8_t *in = _in; ++ uint8_t *out = _out; ++ int i; ++ for (i=0; inext = (link); \ ++ (link)->prev = (link); \ ++} while (0) ++ ++#define DWC_LIST_FIRST(link) ((link)->next) ++#define DWC_LIST_LAST(link) ((link)->prev) ++#define DWC_LIST_END(link) (link) ++#define DWC_LIST_NEXT(link) ((link)->next) ++#define DWC_LIST_PREV(link) ((link)->prev) ++#define DWC_LIST_EMPTY(link) \ ++ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) ++#define DWC_LIST_ENTRY(link, type, field) \ ++ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field)) ++ ++#if 0 ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ (link)->next = (list)->next; \ ++ (link)->prev = (list); \ ++ (list)->next->prev = (link); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ (link)->next = (list); \ ++ (link)->prev = (list)->prev; \ ++ (list)->prev->next = (link); \ ++ (list)->prev = (link); \ ++} while (0) ++#else ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ dwc_list_link_t *__next__ = (list)->next; \ ++ __next__->prev = (link); \ ++ (link)->next = __next__; \ ++ (link)->prev = (list); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ dwc_list_link_t *__prev__ = (list)->prev; \ ++ (list)->prev = (link); \ ++ (link)->next = (list); \ ++ (link)->prev = __prev__; \ ++ __prev__->next = (link); \ ++} while (0) ++#endif ++ ++#if 0 ++static inline void __list_add(struct list_head *new, ++ struct list_head *prev, ++ struct list_head *next) ++{ ++ next->prev = new; ++ new->next = next; ++ new->prev = prev; ++ prev->next = new; ++} ++ ++static inline void list_add(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head, head->next); ++} ++ ++static inline void list_add_tail(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head->prev, head); ++} ++ ++static inline void __list_del(struct list_head * prev, struct list_head * next) ++{ ++ next->prev = prev; ++ prev->next = next; ++} ++ ++static inline void list_del(struct list_head *entry) ++{ ++ __list_del(entry->prev, entry->next); ++ entry->next = LIST_POISON1; ++ entry->prev = LIST_POISON2; ++} ++#endif ++ ++#define DWC_LIST_REMOVE(link) do { \ ++ (link)->next->prev = (link)->prev; \ ++ (link)->prev->next = (link)->next; \ ++} while (0) ++ ++#define DWC_LIST_REMOVE_INIT(link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INIT(link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_HEAD(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_HEAD(list, link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_TAIL(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_TAIL(list, link); \ ++} while (0) ++ ++#define DWC_LIST_FOREACH(var, list) \ ++ for((var) = DWC_LIST_FIRST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_NEXT(var)) ++ ++#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ ++ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = (var2), (var2) = DWC_LIST_NEXT(var2)) ++ ++#define DWC_LIST_FOREACH_REVERSE(var, list) \ ++ for((var) = DWC_LIST_LAST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_PREV(var)) ++ ++/* ++ * Singly-linked List definitions. ++ */ ++#define DWC_SLIST_HEAD(name, type) \ ++struct name { \ ++ struct type *slh_first; /* first element */ \ ++} ++ ++#define DWC_SLIST_HEAD_INITIALIZER(head) \ ++ { NULL } ++ ++#define DWC_SLIST_ENTRY(type) \ ++struct { \ ++ struct type *sle_next; /* next element */ \ ++} ++ ++/* ++ * Singly-linked List access methods. ++ */ ++#define DWC_SLIST_FIRST(head) ((head)->slh_first) ++#define DWC_SLIST_END(head) NULL ++#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) ++#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) ++ ++#define DWC_SLIST_FOREACH(var, head, field) \ ++ for((var) = SLIST_FIRST(head); \ ++ (var) != SLIST_END(head); \ ++ (var) = SLIST_NEXT(var, field)) ++ ++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ ++ for((varp) = &SLIST_FIRST((head)); \ ++ ((var) = *(varp)) != SLIST_END(head); \ ++ (varp) = &SLIST_NEXT((var), field)) ++ ++/* ++ * Singly-linked List functions. ++ */ ++#define DWC_SLIST_INIT(head) { \ ++ SLIST_FIRST(head) = SLIST_END(head); \ ++} ++ ++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ ++ (elm)->field.sle_next = (slistelm)->field.sle_next; \ ++ (slistelm)->field.sle_next = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.sle_next = (head)->slh_first; \ ++ (head)->slh_first = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ ++ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ ++ (head)->slh_first = (head)->slh_first->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ ++ if ((head)->slh_first == (elm)) { \ ++ SLIST_REMOVE_HEAD((head), field); \ ++ } \ ++ else { \ ++ struct type *curelm = (head)->slh_first; \ ++ while( curelm->field.sle_next != (elm) ) \ ++ curelm = curelm->field.sle_next; \ ++ curelm->field.sle_next = \ ++ curelm->field.sle_next->field.sle_next; \ ++ } \ ++} while (0) ++ ++/* ++ * Simple queue definitions. ++ */ ++#define DWC_SIMPLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *sqh_first; /* first element */ \ ++ struct type **sqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).sqh_first } ++ ++#define DWC_SIMPLEQ_ENTRY(type) \ ++struct { \ ++ struct type *sqe_next; /* next element */ \ ++} ++ ++/* ++ * Simple queue access methods. ++ */ ++#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) ++#define DWC_SIMPLEQ_END(head) NULL ++#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) ++#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) ++ ++#define DWC_SIMPLEQ_FOREACH(var, head, field) \ ++ for((var) = SIMPLEQ_FIRST(head); \ ++ (var) != SIMPLEQ_END(head); \ ++ (var) = SIMPLEQ_NEXT(var, field)) ++ ++/* ++ * Simple queue functions. ++ */ ++#define DWC_SIMPLEQ_INIT(head) do { \ ++ (head)->sqh_first = NULL; \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (head)->sqh_first = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.sqe_next = NULL; \ ++ *(head)->sqh_last = (elm); \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (listelm)->field.sqe_next = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ ++ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++/* ++ * Tail queue definitions. ++ */ ++#define DWC_TAILQ_HEAD(name, type) \ ++struct name { \ ++ struct type *tqh_first; /* first element */ \ ++ struct type **tqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_TAILQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).tqh_first } ++ ++#define DWC_TAILQ_ENTRY(type) \ ++struct { \ ++ struct type *tqe_next; /* next element */ \ ++ struct type **tqe_prev; /* address of previous next element */ \ ++} ++ ++/* ++ * tail queue access methods ++ */ ++#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) ++#define DWC_TAILQ_END(head) NULL ++#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) ++#define DWC_TAILQ_LAST(head, headname) \ ++ (*(((struct headname *)((head)->tqh_last))->tqh_last)) ++/* XXX */ ++#define DWC_TAILQ_PREV(elm, headname, field) \ ++ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) ++#define DWC_TAILQ_EMPTY(head) \ ++ (DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head)) ++ ++#define DWC_TAILQ_FOREACH(var, head, field) \ ++ for ((var) = DWC_TAILQ_FIRST(head); \ ++ (var) != DWC_TAILQ_END(head); \ ++ (var) = DWC_TAILQ_NEXT(var, field)) ++ ++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ ++ for ((var) = DWC_TAILQ_LAST(head, headname); \ ++ (var) != DWC_TAILQ_END(head); \ ++ (var) = DWC_TAILQ_PREV(var, headname, field)) ++ ++/* ++ * Tail queue functions. ++ */ ++#define DWC_TAILQ_INIT(head) do { \ ++ (head)->tqh_first = NULL; \ ++ (head)->tqh_last = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ ++ (head)->tqh_first->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (head)->tqh_first = (elm); \ ++ (elm)->field.tqe_prev = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.tqe_next = NULL; \ ++ (elm)->field.tqe_prev = (head)->tqh_last; \ ++ *(head)->tqh_last = (elm); \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (listelm)->field.tqe_next = (elm); \ ++ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ ++ (elm)->field.tqe_next = (listelm); \ ++ *(listelm)->field.tqe_prev = (elm); \ ++ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REMOVE(head, elm, field) do { \ ++ if (((elm)->field.tqe_next) != NULL) \ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ (elm)->field.tqe_prev; \ ++ else \ ++ (head)->tqh_last = (elm)->field.tqe_prev; \ ++ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ ++ (elm2)->field.tqe_next->field.tqe_prev = \ ++ &(elm2)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm2)->field.tqe_next; \ ++ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ ++ *(elm2)->field.tqe_prev = (elm2); \ ++} while (0) ++ ++/* ++ * Circular queue definitions. ++ */ ++#define DWC_CIRCLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *cqh_first; /* first element */ \ ++ struct type *cqh_last; /* last element */ \ ++} ++ ++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ ++ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } ++ ++#define DWC_CIRCLEQ_ENTRY(type) \ ++struct { \ ++ struct type *cqe_next; /* next element */ \ ++ struct type *cqe_prev; /* previous element */ \ ++} ++ ++/* ++ * Circular queue access methods ++ */ ++#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) ++#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) ++#define DWC_CIRCLEQ_END(head) ((void *)(head)) ++#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) ++#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) ++#define DWC_CIRCLEQ_EMPTY(head) \ ++ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) ++ ++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) ++ ++#define DWC_CIRCLEQ_FOREACH(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_LAST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_PREV(var, field)) ++ ++/* ++ * Circular queue functions. ++ */ ++#define DWC_CIRCLEQ_INIT(head) do { \ ++ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ ++ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ ++ (elm)->field.cqe_next = NULL; \ ++ (elm)->field.cqe_prev = NULL; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ ++ (elm)->field.cqe_prev = (listelm); \ ++ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ ++ (listelm)->field.cqe_next = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm); \ ++ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ ++ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ ++ (listelm)->field.cqe_prev = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.cqe_next = (head)->cqh_first; \ ++ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ ++ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (head)->cqh_first->field.cqe_prev = (elm); \ ++ (head)->cqh_first = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ ++ (elm)->field.cqe_prev = (head)->cqh_last; \ ++ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (head)->cqh_last->field.cqe_next = (elm); \ ++ (head)->cqh_last = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ ++ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm)->field.cqe_prev; \ ++ else \ ++ (elm)->field.cqe_next->field.cqe_prev = \ ++ (elm)->field.cqe_prev; \ ++ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm)->field.cqe_next; \ ++ else \ ++ (elm)->field.cqe_prev->field.cqe_next = \ ++ (elm)->field.cqe_next; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ ++ DWC_CIRCLEQ_REMOVE(head, elm, field); \ ++ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_last = (elm2); \ ++ else \ ++ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ ++ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_first = (elm2); \ ++ else \ ++ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ ++} while (0) ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_LIST_H_ */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_mem.c b/drivers/usb/host/dwc_common_port/dwc_mem.c +new file mode 100644 +index 000000000000..ad645ff1ba7e +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_mem.c +@@ -0,0 +1,245 @@ ++/* Memory Debugging */ ++#ifdef DWC_DEBUG_MEMORY ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++struct allocation { ++ void *addr; ++ void *ctx; ++ char *func; ++ int line; ++ uint32_t size; ++ int dma; ++ DWC_CIRCLEQ_ENTRY(allocation) entry; ++}; ++ ++DWC_CIRCLEQ_HEAD(allocation_queue, allocation); ++ ++struct allocation_manager { ++ void *mem_ctx; ++ struct allocation_queue allocations; ++ ++ /* statistics */ ++ int num; ++ int num_freed; ++ int num_active; ++ uint32_t total; ++ uint32_t cur; ++ uint32_t max; ++}; ++ ++static struct allocation_manager *manager = NULL; ++ ++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr, ++ int dma) ++{ ++ struct allocation *a; ++ ++ DWC_ASSERT(manager != NULL, "manager not allocated"); ++ ++ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a)); ++ if (!a) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1); ++ if (!a->func) { ++ __DWC_FREE(manager->mem_ctx, a); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1); ++ a->addr = addr; ++ a->ctx = ctx; ++ a->line = line; ++ a->size = size; ++ a->dma = dma; ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); ++ ++ /* Update stats */ ++ manager->num++; ++ manager->num_active++; ++ manager->total += size; ++ manager->cur += size; ++ ++ if (manager->max < manager->cur) { ++ manager->max = manager->cur; ++ } ++ ++ return 0; ++} ++ ++static struct allocation *find_allocation(void *ctx, void *addr) ++{ ++ struct allocation *a; ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ if (a->ctx == ctx && a->addr == addr) { ++ return a; ++ } ++ } ++ ++ return NULL; ++} ++ ++static void free_allocation(void *ctx, void *addr, char const *func, int line) ++{ ++ struct allocation *a = find_allocation(ctx, addr); ++ ++ if (!a) { ++ DWC_ASSERT(0, ++ "Free of address %p that was never allocated or already freed %s:%d", ++ addr, func, line); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); ++ ++ manager->num_active--; ++ manager->num_freed++; ++ manager->cur -= a->size; ++ __DWC_FREE(manager->mem_ctx, a->func); ++ __DWC_FREE(manager->mem_ctx, a); ++} ++ ++int dwc_memory_debug_start(void *mem_ctx) ++{ ++ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); ++ ++ if (manager) { ++ return -DWC_E_BUSY; ++ } ++ ++ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->allocations); ++ manager->mem_ctx = mem_ctx; ++ manager->num = 0; ++ manager->num_freed = 0; ++ manager->num_active = 0; ++ manager->total = 0; ++ manager->cur = 0; ++ manager->max = 0; ++ ++ return 0; ++} ++ ++void dwc_memory_debug_stop(void) ++{ ++ struct allocation *a; ++ ++ dwc_memory_debug_report(); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); ++ free_allocation(a->ctx, a->addr, NULL, -1); ++ } ++ ++ __DWC_FREE(manager->mem_ctx, manager); ++} ++ ++void dwc_memory_debug_report(void) ++{ ++ struct allocation *a; ++ ++ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); ++ DWC_PRINTF("Num Allocations = %d\n", manager->num); ++ DWC_PRINTF("Freed = %d\n", manager->num_freed); ++ DWC_PRINTF("Active = %d\n", manager->num_active); ++ DWC_PRINTF("Current Memory Used = %d\n", manager->cur); ++ DWC_PRINTF("Total Memory Used = %d\n", manager->total); ++ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); ++ DWC_PRINTF("Unfreed allocations:\n"); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", ++ a->addr, a->size, a->func, a->line, a->dma); ++ } ++} ++ ++/* The replacement functions */ ++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line) ++{ ++ void *addr = __DWC_ALLOC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, ++ int line) ++{ ++ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line) ++{ ++ free_allocation(mem_ctx, addr, func, line); ++ __DWC_FREE(mem_ctx, addr); ++} ++ ++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, ++ dwc_dma_t *dma_addr, char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line) ++{ ++ free_allocation(dma_ctx, virt_addr, func, line); ++ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++#endif /* DWC_DEBUG_MEMORY */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_modpow.c b/drivers/usb/host/dwc_common_port/dwc_modpow.c +new file mode 100644 +index 000000000000..20045381208a +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c +@@ -0,0 +1,636 @@ ++/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows. ++ * ++ * PuTTY is copyright 1997-2007 Simon Tatham. ++ * ++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian ++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, ++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus ++ * Kuhn, and CORE SDI S.A. ++ * ++ * Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation files ++ * (the "Software"), to deal in the Software without restriction, ++ * including without limitation the rights to use, copy, modify, merge, ++ * publish, distribute, sublicense, and/or sell copies of the Software, ++ * and to permit persons to whom the Software is furnished to do so, ++ * subject to the following conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE ++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF ++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION ++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ++ * ++ */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_modpow.h" ++ ++#define BIGNUM_INT_MASK 0xFFFFFFFFUL ++#define BIGNUM_TOP_BIT 0x80000000UL ++#define BIGNUM_INT_BITS 32 ++ ++ ++static void *snmalloc(void *mem_ctx, size_t n, size_t size) ++{ ++ void *p; ++ size *= n; ++ if (size == 0) size = 1; ++ p = dwc_alloc(mem_ctx, size); ++ return p; ++} ++ ++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type))) ++#define sfree dwc_free ++ ++/* ++ * Usage notes: ++ * * Do not call the DIVMOD_WORD macro with expressions such as array ++ * subscripts, as some implementations object to this (see below). ++ * * Note that none of the division methods below will cope if the ++ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful ++ * to avoid this case. ++ * If this condition occurs, in the case of the x86 DIV instruction, ++ * an overflow exception will occur, which (according to a correspondent) ++ * will manifest on Windows as something like ++ * 0xC0000095: Integer overflow ++ * The C variant won't give the right answer, either. ++ */ ++ ++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2) ++ ++#if defined __GNUC__ && defined __i386__ ++#define DIVMOD_WORD(q, r, hi, lo, w) \ ++ __asm__("div %2" : \ ++ "=d" (r), "=a" (q) : \ ++ "r" (w), "d" (hi), "a" (lo)) ++#else ++#define DIVMOD_WORD(q, r, hi, lo, w) do { \ ++ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \ ++ q = n / w; \ ++ r = n % w; \ ++} while (0) ++#endif ++ ++// q = n / w; ++// r = n % w; ++ ++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8) ++ ++#define BIGNUM_INTERNAL ++ ++static Bignum newbn(void *mem_ctx, int length) ++{ ++ Bignum b = snewn(mem_ctx, length + 1, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b)); ++ b[0] = length; ++ return b; ++} ++ ++void freebn(void *mem_ctx, Bignum b) ++{ ++ /* ++ * Burn the evidence, just in case. ++ */ ++ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1)); ++ sfree(mem_ctx, b); ++} ++ ++/* ++ * Compute c = a * b. ++ * Input is in the first len words of a and b. ++ * Result is returned in the first 2*len words of c. ++ */ ++static void internal_mul(BignumInt *a, BignumInt *b, ++ BignumInt *c, int len) ++{ ++ int i, j; ++ BignumDblInt t; ++ ++ for (j = 0; j < 2 * len; j++) ++ c[j] = 0; ++ ++ for (i = len - 1; i >= 0; i--) { ++ t = 0; ++ for (j = len - 1; j >= 0; j--) { ++ t += MUL_WORD(a[i], (BignumDblInt) b[j]); ++ t += (BignumDblInt) c[i + j + 1]; ++ c[i + j + 1] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ c[i] = (BignumInt) t; ++ } ++} ++ ++static void internal_add_shifted(BignumInt *number, ++ unsigned n, int shift) ++{ ++ int word = 1 + (shift / BIGNUM_INT_BITS); ++ int bshift = shift % BIGNUM_INT_BITS; ++ BignumDblInt addend; ++ ++ addend = (BignumDblInt)n << bshift; ++ ++ while (addend) { ++ addend += number[word]; ++ number[word] = (BignumInt) addend & BIGNUM_INT_MASK; ++ addend >>= BIGNUM_INT_BITS; ++ word++; ++ } ++} ++ ++/* ++ * Compute a = a % m. ++ * Input in first alen words of a and first mlen words of m. ++ * Output in first alen words of a ++ * (of which first alen-mlen words will be zero). ++ * The MSW of m MUST have its high bit set. ++ * Quotient is accumulated in the `quotient' array, which is a Bignum ++ * rather than the internal bigendian format. Quotient parts are shifted ++ * left by `qshift' before adding into quot. ++ */ ++static void internal_mod(BignumInt *a, int alen, ++ BignumInt *m, int mlen, ++ BignumInt *quot, int qshift) ++{ ++ BignumInt m0, m1; ++ unsigned int h; ++ int i, k; ++ ++ m0 = m[0]; ++ if (mlen > 1) ++ m1 = m[1]; ++ else ++ m1 = 0; ++ ++ for (i = 0; i <= alen - mlen; i++) { ++ BignumDblInt t; ++ unsigned int q, r, c, ai1; ++ ++ if (i == 0) { ++ h = 0; ++ } else { ++ h = a[i - 1]; ++ a[i - 1] = 0; ++ } ++ ++ if (i == alen - 1) ++ ai1 = 0; ++ else ++ ai1 = a[i + 1]; ++ ++ /* Find q = h:a[i] / m0 */ ++ if (h >= m0) { ++ /* ++ * Special case. ++ * ++ * To illustrate it, suppose a BignumInt is 8 bits, and ++ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then ++ * our initial division will be 0xA123 / 0xA1, which ++ * will give a quotient of 0x100 and a divide overflow. ++ * However, the invariants in this division algorithm ++ * are not violated, since the full number A1:23:... is ++ * _less_ than the quotient prefix A1:B2:... and so the ++ * following correction loop would have sorted it out. ++ * ++ * In this situation we set q to be the largest ++ * quotient we _can_ stomach (0xFF, of course). ++ */ ++ q = BIGNUM_INT_MASK; ++ } else { ++ /* Macro doesn't want an array subscript expression passed ++ * into it (see definition), so use a temporary. */ ++ BignumInt tmplo = a[i]; ++ DIVMOD_WORD(q, r, h, tmplo, m0); ++ ++ /* Refine our estimate of q by looking at ++ h:a[i]:a[i+1] / m0:m1 */ ++ t = MUL_WORD(m1, q); ++ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) { ++ q--; ++ t -= m1; ++ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */ ++ if (r >= (BignumDblInt) m0 && ++ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--; ++ } ++ } ++ ++ /* Subtract q * m from a[i...] */ ++ c = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t = MUL_WORD(q, m[k]); ++ t += c; ++ c = (unsigned)(t >> BIGNUM_INT_BITS); ++ if ((BignumInt) t > a[i + k]) ++ c++; ++ a[i + k] -= (BignumInt) t; ++ } ++ ++ /* Add back m in case of borrow */ ++ if (c != h) { ++ t = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t += m[k]; ++ t += a[i + k]; ++ a[i + k] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ q--; ++ } ++ if (quot) ++ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i)); ++ } ++} ++ ++/* ++ * Compute p % mod. ++ * The most significant word of mod MUST be non-zero. ++ * We assume that the result array is the same size as the mod array. ++ * We optionally write out a quotient if `quotient' is non-NULL. ++ * We can avoid writing out the result if `result' is NULL. ++ */ ++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient) ++{ ++ BignumInt *n, *m; ++ int mshift; ++ int plen, mlen, i, j; ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ plen = p[0]; ++ /* Ensure plen > mlen */ ++ if (plen <= mlen) ++ plen = mlen + 1; ++ ++ /* Allocate n of size plen, copy p to n */ ++ n = snewn(mem_ctx, plen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ for (j = 0; j < plen; j++) ++ n[j] = 0; ++ for (j = 1; j <= (int)p[0]; j++) ++ n[plen - j] = p[j]; ++ ++ /* Main computation */ ++ internal_mod(n, plen, m, mlen, quotient, mshift); ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = plen - mlen - 1; i < plen - 1; i++) ++ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ n[plen - 1] = n[plen - 1] << mshift; ++ internal_mod(n, plen, m, mlen, quotient, 0); ++ for (i = plen - 1; i >= plen - mlen; i--) ++ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ if (result) { ++ for (i = 1; i <= (int)result[0]; i++) { ++ int j = plen - i; ++ result[i] = j >= 0 ? n[j] : 0; ++ } ++ } ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < plen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++} ++ ++/* ++ * Simple remainder. ++ */ ++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b) ++{ ++ Bignum r = newbn(mem_ctx, b[0]); ++ bigdivmod(mem_ctx, a, b, r, NULL); ++ return r; ++} ++ ++/* ++ * Compute (base ^ exp) % mod. ++ */ ++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod) ++{ ++ BignumInt *a, *b, *n, *m; ++ int mshift; ++ int mlen, i, j; ++ Bignum base, result; ++ ++ /* ++ * The most significant word of mod needs to be non-zero. It ++ * should already be, but let's make sure. ++ */ ++ //assert(mod[mod[0]] != 0); ++ ++ /* ++ * Make sure the base is smaller than the modulus, by reducing ++ * it modulo the modulus if not. ++ */ ++ base = bigmod(mem_ctx, base_in, mod); ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = ++ (m[i] << mshift) | (m[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ /* Allocate n of size mlen, copy base to n */ ++ n = snewn(mem_ctx, mlen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ i = mlen - base[0]; ++ for (j = 0; j < i; j++) ++ n[j] = 0; ++ for (j = 0; j < base[0]; j++) ++ n[i + j] = base[base[0] - j]; ++ ++ /* Allocate a and b of size 2*mlen. Set a = 1 */ ++ a = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!a) ++ //abort(); /* FIXME */ ++ b = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ a[2 * mlen - 1] = 1; ++ ++ /* Skip leading zero bits of exp. */ ++ i = 0; ++ j = BIGNUM_INT_BITS - 1; ++ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) { ++ j--; ++ if (j < 0) { ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ } ++ ++ /* Main computation */ ++ while (i < exp[0]) { ++ while (j >= 0) { ++ internal_mul(a + mlen, a + mlen, b, mlen); ++ internal_mod(b, mlen * 2, m, mlen, NULL, 0); ++ if ((exp[exp[0] - i] & (1 << j)) != 0) { ++ internal_mul(b + mlen, n, a, mlen); ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ } else { ++ BignumInt *t; ++ t = a; ++ a = b; ++ b = t; ++ } ++ j--; ++ } ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = mlen - 1; i < 2 * mlen - 1; i++) ++ a[i] = ++ (a[i] << mshift) | (a[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift; ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ for (i = 2 * mlen - 1; i >= mlen; i--) ++ a[i] = ++ (a[i] >> mshift) | (a[i - 1] << ++ (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ result = newbn(mem_ctx, mod[0]); ++ for (i = 0; i < mlen; i++) ++ result[result[0] - i] = a[i + mlen]; ++ while (result[0] > 1 && result[result[0]] == 0) ++ result[0]--; ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ sfree(mem_ctx, a); ++ for (i = 0; i < 2 * mlen; i++) ++ b[i] = 0; ++ sfree(mem_ctx, b); ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < mlen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++ ++ freebn(mem_ctx, base); ++ ++ return result; ++} ++ ++ ++#ifdef UNITTEST ++ ++static __u32 dh_p[] = { ++ 96, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++ 0xA93AD2CA, ++ 0x4B82D120, ++ 0xE0FD108E, ++ 0x43DB5BFC, ++ 0x74E5AB31, ++ 0x08E24FA0, ++ 0xBAD946E2, ++ 0x770988C0, ++ 0x7A615D6C, ++ 0xBBE11757, ++ 0x177B200C, ++ 0x521F2B18, ++ 0x3EC86A64, ++ 0xD8760273, ++ 0xD98A0864, ++ 0xF12FFA06, ++ 0x1AD2EE6B, ++ 0xCEE3D226, ++ 0x4A25619D, ++ 0x1E8C94E0, ++ 0xDB0933D7, ++ 0xABF5AE8C, ++ 0xA6E1E4C7, ++ 0xB3970F85, ++ 0x5D060C7D, ++ 0x8AEA7157, ++ 0x58DBEF0A, ++ 0xECFB8504, ++ 0xDF1CBA64, ++ 0xA85521AB, ++ 0x04507A33, ++ 0xAD33170D, ++ 0x8AAAC42D, ++ 0x15728E5A, ++ 0x98FA0510, ++ 0x15D22618, ++ 0xEA956AE5, ++ 0x3995497C, ++ 0x95581718, ++ 0xDE2BCBF6, ++ 0x6F4C52C9, ++ 0xB5C55DF0, ++ 0xEC07A28F, ++ 0x9B2783A2, ++ 0x180E8603, ++ 0xE39E772C, ++ 0x2E36CE3B, ++ 0x32905E46, ++ 0xCA18217C, ++ 0xF1746C08, ++ 0x4ABC9804, ++ 0x670C354E, ++ 0x7096966D, ++ 0x9ED52907, ++ 0x208552BB, ++ 0x1C62F356, ++ 0xDCA3AD96, ++ 0x83655D23, ++ 0xFD24CF5F, ++ 0x69163FA8, ++ 0x1C55D39A, ++ 0x98DA4836, ++ 0xA163BF05, ++ 0xC2007CB8, ++ 0xECE45B3D, ++ 0x49286651, ++ 0x7C4B1FE6, ++ 0xAE9F2411, ++ 0x5A899FA5, ++ 0xEE386BFB, ++ 0xF406B7ED, ++ 0x0BFF5CB6, ++ 0xA637ED6B, ++ 0xF44C42E9, ++ 0x625E7EC6, ++ 0xE485B576, ++ 0x6D51C245, ++ 0x4FE1356D, ++ 0xF25F1437, ++ 0x302B0A6D, ++ 0xCD3A431B, ++ 0xEF9519B3, ++ 0x8E3404DD, ++ 0x514A0879, ++ 0x3B139B22, ++ 0x020BBEA6, ++ 0x8A67CC74, ++ 0x29024E08, ++ 0x80DC1CD1, ++ 0xC4C6628B, ++ 0x2168C234, ++ 0xC90FDAA2, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++}; ++ ++static __u32 dh_a[] = { ++ 8, ++ 0xdf367516, ++ 0x86459caa, ++ 0xe2d459a4, ++ 0xd910dae0, ++ 0x8a8b5e37, ++ 0x67ab31c6, ++ 0xf0b55ea9, ++ 0x440051d6, ++}; ++ ++static __u32 dh_b[] = { ++ 8, ++ 0xded92656, ++ 0xe07a048a, ++ 0x6fa452cd, ++ 0x2df89d30, ++ 0xc75f1b0f, ++ 0x8ce3578f, ++ 0x7980a324, ++ 0x5daec786, ++}; ++ ++static __u32 dh_g[] = { ++ 1, ++ 2, ++}; ++ ++int main(void) ++{ ++ int i; ++ __u32 *k; ++ k = dwc_modpow(NULL, dh_g, dh_a, dh_p); ++ ++ printf("\n\n"); ++ for (i=0; i> 16; ++ printf("%04x %04x ", m, l); ++ if (!((i + 1)%13)) printf("\n"); ++ } ++ printf("\n\n"); ++ ++ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) { ++ printf("PASS\n\n"); ++ } ++ else { ++ printf("FAIL\n\n"); ++ } ++ ++} ++ ++#endif /* UNITTEST */ ++ ++#endif /* CONFIG_MACH_IPMATE */ ++ ++#endif /*DWC_CRYPTOLIB */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_modpow.h b/drivers/usb/host/dwc_common_port/dwc_modpow.h +new file mode 100644 +index 000000000000..64f00c276e71 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h +@@ -0,0 +1,34 @@ ++/* ++ * dwc_modpow.h ++ * See dwc_modpow.c for license and changes ++ */ ++#ifndef _DWC_MODPOW_H ++#define _DWC_MODPOW_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * This file defines the module exponentiation function which is only used ++ * internally by the DWC UWB modules for calculation of PKs during numeric ++ * association. The routine is taken from the PUTTY, an open source terminal ++ * emulator. The PUTTY License is preserved in the dwc_modpow.c file. ++ * ++ */ ++ ++typedef uint32_t BignumInt; ++typedef uint64_t BignumDblInt; ++typedef BignumInt *Bignum; ++ ++/* Compute modular exponentiaion */ ++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _LINUX_BIGNUM_H */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_notifier.c b/drivers/usb/host/dwc_common_port/dwc_notifier.c +new file mode 100644 +index 000000000000..8b3772afe11d +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c +@@ -0,0 +1,319 @@ ++#ifdef DWC_NOTIFYLIB ++ ++#include "dwc_notifier.h" ++#include "dwc_list.h" ++ ++typedef struct dwc_observer { ++ void *observer; ++ dwc_notifier_callback_t callback; ++ void *data; ++ char *notification; ++ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; ++} observer_t; ++ ++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); ++ ++typedef struct dwc_notifier { ++ void *mem_ctx; ++ void *object; ++ struct observer_queue observers; ++ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; ++} notifier_t; ++ ++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); ++ ++typedef struct manager { ++ void *mem_ctx; ++ void *wkq_ctx; ++ dwc_workq_t *wq; ++// dwc_mutex_t *mutex; ++ struct notifier_queue notifiers; ++} manager_t; ++ ++static manager_t *manager = NULL; ++ ++static int create_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ manager = dwc_alloc(mem_ctx, sizeof(manager_t)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->notifiers); ++ ++ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ"); ++ if (!manager->wq) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ return 0; ++} ++ ++static void free_manager(void) ++{ ++ dwc_workq_free(manager->wq); ++ ++ /* All notifiers must have unregistered themselves before this module ++ * can be removed. Hitting this assertion indicates a programmer ++ * error. */ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), ++ "Notification manager being freed before all notifiers have been removed"); ++ dwc_free(manager->mem_ctx, manager); ++} ++ ++#ifdef DEBUG ++static void dump_manager(void) ++{ ++ notifier_t *n; ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_DEBUG("List of all notifiers and observers:\n"); ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ DWC_DEBUG("Notifier %p has observers:\n", n->object); ++ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { ++ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification); ++ } ++ } ++} ++#else ++#define dump_manager(...) ++#endif ++ ++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t)); ++ ++ if (!new_observer) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); ++ new_observer->observer = observer; ++ new_observer->notification = notification; ++ new_observer->callback = callback; ++ new_observer->data = data; ++ return new_observer; ++} ++ ++static void free_observer(void *mem_ctx, observer_t *observer) ++{ ++ dwc_free(mem_ctx, observer); ++} ++ ++static notifier_t *alloc_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t)); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(¬ifier->observers); ++ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); ++ ++ notifier->mem_ctx = mem_ctx; ++ notifier->object = object; ++ return notifier; ++} ++ ++static void free_notifier(notifier_t *notifier) ++{ ++ observer_t *observer; ++ ++ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { ++ free_observer(notifier->mem_ctx, observer); ++ } ++ ++ dwc_free(notifier->mem_ctx, notifier); ++} ++ ++static notifier_t *find_notifier(void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { ++ if (notifier->object == object) { ++ return notifier; ++ } ++ } ++ ++ return NULL; ++} ++ ++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ return create_manager(mem_ctx, wkq_ctx); ++} ++ ++void dwc_free_notification_manager(void) ++{ ++ free_manager(); ++} ++ ++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ notifier = find_notifier(object); ++ if (notifier) { ++ DWC_ERROR("Notifier %p is already registered\n", object); ++ return NULL; ++ } ++ ++ notifier = alloc_notifier(mem_ctx, object); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); ++ ++ DWC_INFO("Notifier %p registered", object); ++ dump_manager(); ++ ++ return notifier; ++} ++ ++void dwc_unregister_notifier(dwc_notifier_t *notifier) ++{ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { ++ observer_t *o; ++ ++ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object); ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification); ++ } ++ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), ++ "Notifier %p has active observers when removing", notifier); ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); ++ free_notifier(notifier); ++ ++ DWC_INFO("Notifier unregistered"); ++ dump_manager(); ++} ++ ++/* Add an observer to observe the notifier for a particular state, event, or notification. */ ++int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ notifier_t *notifier = find_notifier(object); ++ observer_t *new_observer; ++ ++ if (!notifier) { ++ DWC_ERROR("Notifier %p is not found when adding observer\n", object); ++ return -DWC_E_INVALID; ++ } ++ ++ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data); ++ if (!new_observer) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); ++ ++ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", ++ observer, object, notification, callback, data); ++ ++ dump_manager(); ++ return 0; ++} ++ ++int dwc_remove_observer(void *observer) ++{ ++ notifier_t *n; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ observer_t *o; ++ observer_t *o2; ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { ++ if (o->observer == observer) { ++ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); ++ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", ++ o->observer, n->object, o->notification); ++ free_observer(n->mem_ctx, o); ++ } ++ } ++ } ++ ++ dump_manager(); ++ return 0; ++} ++ ++typedef struct callback_data { ++ void *mem_ctx; ++ dwc_notifier_callback_t cb; ++ void *observer; ++ void *data; ++ void *object; ++ char *notification; ++ void *notification_data; ++} cb_data_t; ++ ++static void cb_task(void *data) ++{ ++ cb_data_t *cb = (cb_data_t *)data; ++ ++ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); ++ dwc_free(cb->mem_ctx, cb); ++} ++ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) ++{ ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ int len = DWC_STRLEN(notification); ++ ++ if (DWC_STRLEN(o->notification) != len) { ++ continue; ++ } ++ ++ if (DWC_STRNCMP(o->notification, notification, len) == 0) { ++ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t)); ++ ++ if (!cb_data) { ++ DWC_ERROR("Failed to allocate callback data\n"); ++ return; ++ } ++ ++ cb_data->mem_ctx = notifier->mem_ctx; ++ cb_data->cb = o->callback; ++ cb_data->observer = o->observer; ++ cb_data->data = o->data; ++ cb_data->object = notifier->object; ++ cb_data->notification = notification; ++ cb_data->notification_data = notification_data; ++ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification); ++ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, ++ "Notify callback from %p for Notification %s, to observer %p", ++ cb_data->object, notification, cb_data->observer); ++ } ++ } ++} ++ ++#endif /* DWC_NOTIFYLIB */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_notifier.h b/drivers/usb/host/dwc_common_port/dwc_notifier.h +new file mode 100644 +index 000000000000..4a8cdfe565b1 +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h +@@ -0,0 +1,122 @@ ++ ++#ifndef __DWC_NOTIFIER_H__ ++#define __DWC_NOTIFIER_H__ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * A simple implementation of the Observer pattern. Any "module" can ++ * register as an observer or notifier. The notion of "module" is abstract and ++ * can mean anything used to identify either an observer or notifier. Usually ++ * it will be a pointer to a data structure which contains some state, ie an ++ * object. ++ * ++ * Before any notifiers can be added, the global notification manager must be ++ * brought up with dwc_alloc_notification_manager(). ++ * dwc_free_notification_manager() will bring it down and free all resources. ++ * These would typically be called upon module load and unload. The ++ * notification manager is a single global instance that handles all registered ++ * observable modules and observers so this should be done only once. ++ * ++ * A module can be observable by using Notifications to publicize some general ++ * information about it's state or operation. It does not care who listens, or ++ * even if anyone listens, or what they do with the information. The observable ++ * modules do not need to know any information about it's observers or their ++ * interface, or their state or data. ++ * ++ * Any module can register to emit Notifications. It should publish a list of ++ * notifications that it can emit and their behavior, such as when they will get ++ * triggered, and what information will be provided to the observer. Then it ++ * should register itself as an observable module. See dwc_register_notifier(). ++ * ++ * Any module can observe any observable, registered module, provided it has a ++ * handle to the other module and knows what notifications to observe. See ++ * dwc_add_observer(). ++ * ++ * A function of type dwc_notifier_callback_t is called whenever a notification ++ * is triggered with one or more observers observing it. This function is ++ * called in it's own process so it may sleep or block if needed. It is ++ * guaranteed to be called sometime after the notification has occurred and will ++ * be called once per each time the notification is triggered. It will NOT be ++ * called in the same process context used to trigger the notification. ++ * ++ * @section Limitiations ++ * ++ * Keep in mind that Notifications that can be triggered in rapid sucession may ++ * schedule too many processes too handle. Be aware of this limitation when ++ * designing to use notifications, and only add notifications for appropriate ++ * observable information. ++ * ++ * Also Notification callbacks are not synchronous. If you need to synchronize ++ * the behavior between module/observer you must use other means. And perhaps ++ * that will mean Notifications are not the proper solution. ++ */ ++ ++struct dwc_notifier; ++typedef struct dwc_notifier dwc_notifier_t; ++ ++/** The callback function must be of this type. ++ * ++ * @param object This is the object that is being observed. ++ * @param notification This is the notification that was triggered. ++ * @param observer This is the observer ++ * @param notification_data This is notification-specific data that the notifier ++ * has included in this notification. The value of this should be published in ++ * the documentation of the observable module with the notifications. ++ * @param user_data This is any custom data that the observer provided when ++ * adding itself as an observer to the notification. */ ++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, ++ void *notification_data, void *user_data); ++ ++/** Brings up the notification manager. */ ++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx); ++/** Brings down the notification manager. */ ++extern void dwc_free_notification_manager(void); ++ ++/** This function registers an observable module. A dwc_notifier_t object is ++ * returned to the observable module. This is an opaque object that is used by ++ * the observable module to trigger notifications. This object should only be ++ * accessible to functions that are authorized to trigger notifications for this ++ * module. Observers do not need this object. */ ++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object); ++ ++/** This function unregisters an observable module. All observers have to be ++ * removed prior to unregistration. */ ++extern void dwc_unregister_notifier(dwc_notifier_t *notifier); ++ ++/** Add a module as an observer to the observable module. The observable module ++ * needs to have previously registered with the notification manager. ++ * ++ * @param observer The observer module ++ * @param object The module to observe ++ * @param notification The notification to observe ++ * @param callback The callback function to call ++ * @param user_data Any additional user data to pass into the callback function */ ++extern int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *user_data); ++ ++/** Removes the specified observer from all notifications that it is currently ++ * observing. */ ++extern int dwc_remove_observer(void *observer); ++ ++/** This function triggers a Notification. It should be called by the ++ * observable module, or any module or library which the observable module ++ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. ++ * ++ * dwc_notify is a non-blocking function. Callbacks are scheduled called in ++ * their own process context for each trigger. Callbacks can be blocking. ++ * dwc_notify can be called from interrupt context if needed. ++ * ++ */ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* __DWC_NOTIFIER_H__ */ +diff --git a/drivers/usb/host/dwc_common_port/dwc_os.h b/drivers/usb/host/dwc_common_port/dwc_os.h +new file mode 100644 +index 000000000000..9a86d299403b +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_os.h +@@ -0,0 +1,1276 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $ ++ * $Revision: #14 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621695 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_OS_H_ ++#define _DWC_OS_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * DWC portability library, low level os-wrapper functions ++ * ++ */ ++ ++/* These basic types need to be defined by some OS header file or custom header ++ * file for your specific target architecture. ++ * ++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t ++ * ++ * Any custom or alternate header file must be added and enabled here. ++ */ ++ ++#ifdef DWC_LINUX ++# include ++# ifdef CONFIG_DEBUG_MUTEXES ++# include ++# endif ++# include ++# include ++# include ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++# include ++#endif ++ ++ ++/** @name Primitive Types and Values */ ++ ++/** We define a boolean type for consistency. Can be either YES or NO */ ++typedef uint8_t dwc_bool_t; ++#define YES 1 ++#define NO 0 ++ ++#ifdef DWC_LINUX ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID EINVAL ++#define DWC_E_NO_MEMORY ENOMEM ++#define DWC_E_NO_DEVICE ENODEV ++#define DWC_E_NOT_SUPPORTED EOPNOTSUPP ++#define DWC_E_TIMEOUT ETIMEDOUT ++#define DWC_E_BUSY EBUSY ++#define DWC_E_AGAIN EAGAIN ++#define DWC_E_RESTART ERESTART ++#define DWC_E_ABORT ECONNABORTED ++#define DWC_E_SHUTDOWN ESHUTDOWN ++#define DWC_E_NO_DATA ENODATA ++#define DWC_E_DISCONNECT ECONNRESET ++#define DWC_E_UNKNOWN EINVAL ++#define DWC_E_NO_STREAM_RES ENOSR ++#define DWC_E_COMMUNICATION ECOMM ++#define DWC_E_OVERFLOW EOVERFLOW ++#define DWC_E_PROTOCOL EPROTO ++#define DWC_E_IN_PROGRESS EINPROGRESS ++#define DWC_E_PIPE EPIPE ++#define DWC_E_IO EIO ++#define DWC_E_NO_SPACE ENOSPC ++ ++#else ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID 1001 ++#define DWC_E_NO_MEMORY 1002 ++#define DWC_E_NO_DEVICE 1003 ++#define DWC_E_NOT_SUPPORTED 1004 ++#define DWC_E_TIMEOUT 1005 ++#define DWC_E_BUSY 1006 ++#define DWC_E_AGAIN 1007 ++#define DWC_E_RESTART 1008 ++#define DWC_E_ABORT 1009 ++#define DWC_E_SHUTDOWN 1010 ++#define DWC_E_NO_DATA 1011 ++#define DWC_E_DISCONNECT 2000 ++#define DWC_E_UNKNOWN 3000 ++#define DWC_E_NO_STREAM_RES 4001 ++#define DWC_E_COMMUNICATION 4002 ++#define DWC_E_OVERFLOW 4003 ++#define DWC_E_PROTOCOL 4004 ++#define DWC_E_IN_PROGRESS 4005 ++#define DWC_E_PIPE 4006 ++#define DWC_E_IO 4007 ++#define DWC_E_NO_SPACE 4008 ++ ++#endif ++ ++ ++/** @name Tracing/Logging Functions ++ * ++ * These function provide the capability to add tracing, debugging, and error ++ * messages, as well exceptions as assertions. The WUDEV uses these ++ * extensively. These could be logged to the main console, the serial port, an ++ * internal buffer, etc. These functions could also be no-op if they are too ++ * expensive on your system. By default undefining the DEBUG macro already ++ * no-ops some of these functions. */ ++ ++/** Returns non-zero if in interrupt context. */ ++extern dwc_bool_t DWC_IN_IRQ(void); ++#define dwc_in_irq DWC_IN_IRQ ++ ++/** Returns "IRQ" if DWC_IN_IRQ is true. */ ++static inline char *dwc_irq(void) { ++ return DWC_IN_IRQ() ? "IRQ" : ""; ++} ++ ++/** Returns non-zero if in bottom-half context. */ ++extern dwc_bool_t DWC_IN_BH(void); ++#define dwc_in_bh DWC_IN_BH ++ ++/** Returns "BH" if DWC_IN_BH is true. */ ++static inline char *dwc_bh(void) { ++ return DWC_IN_BH() ? "BH" : ""; ++} ++ ++/** ++ * A vprintf() clone. Just call vprintf if you've got it. ++ */ ++extern void DWC_VPRINTF(char *format, va_list args); ++#define dwc_vprintf DWC_VPRINTF ++ ++/** ++ * A vsnprintf() clone. Just call vprintf if you've got it. ++ */ ++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); ++#define dwc_vsnprintf DWC_VSNPRINTF ++ ++/** ++ * printf() clone. Just call printf if you've go it. ++ */ ++extern void DWC_PRINTF(char *format, ...) ++/* This provides compiler level static checking of the parameters if you're ++ * using GCC. */ ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_printf DWC_PRINTF ++ ++/** ++ * sprintf() clone. Just call sprintf if you've got it. ++ */ ++extern int DWC_SPRINTF(char *string, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 2, 3))); ++#else ++ ; ++#endif ++#define dwc_sprintf DWC_SPRINTF ++ ++/** ++ * snprintf() clone. Just call snprintf if you've got it. ++ */ ++extern int DWC_SNPRINTF(char *string, int size, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 3, 4))); ++#else ++ ; ++#endif ++#define dwc_snprintf DWC_SNPRINTF ++ ++/** ++ * Prints a WARNING message. On systems that don't differentiate between ++ * warnings and regular log messages, just print it. Indicates that something ++ * may be wrong with the driver. Works like printf(). ++ * ++ * Use the DWC_WARN macro to call this function. ++ */ ++extern void __DWC_WARN(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an error message. On systems that don't differentiate between errors ++ * and regular log messages, just print it. Indicates that something went wrong ++ * with the driver. Works like printf(). ++ * ++ * Use the DWC_ERROR macro to call this function. ++ */ ++extern void __DWC_ERROR(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an exception error message and takes some user-defined action such as ++ * print out a backtrace or trigger a breakpoint. Indicates that something went ++ * abnormally wrong with the driver such as programmer error, or other ++ * exceptional condition. It should not be ignored so even on systems without ++ * printing capability, some action should be taken to notify the developer of ++ * it. Works like printf(). ++ */ ++extern void DWC_EXCEPTION(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_exception DWC_EXCEPTION ++ ++#ifndef DWC_OTG_DEBUG_LEV ++#define DWC_OTG_DEBUG_LEV 0 ++#endif ++ ++#ifdef DEBUG ++/** ++ * Prints out a debug message. Used for logging/trace messages. ++ * ++ * Use the DWC_DEBUG macro to call this function ++ */ ++extern void __DWC_DEBUG(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#else ++#define __DWC_DEBUG printk ++#endif ++ ++/** ++ * Prints out a Debug message. ++ */ ++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \ ++ __func__, dwc_irq(), ## _args) ++#define dwc_debug DWC_DEBUG ++/** ++ * Prints out a Debug message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 0 ++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args ) ++#else ++#define DWC_DEBUGC(_format, _args...) ++#endif ++#define dwc_debugc DWC_DEBUGC ++/** ++ * Prints out an informative message. ++ */ ++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \ ++ dwc_irq(), ## _args) ++#define dwc_info DWC_INFO ++/** ++ * Prints out an informative message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 1 ++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args ) ++#else ++#define DWC_INFOC(_format, _args...) ++#endif ++#define dwc_infoc DWC_INFOC ++/** ++ * Prints out a warning message. ++ */ ++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_warn DWC_WARN ++/** ++ * Prints out an error message. ++ */ ++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_error DWC_ERROR ++ ++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_proto_error DWC_PROTO_ERROR ++ ++#ifdef DEBUG ++/** Prints out a exception error message if the _expr expression fails. Disabled ++ * if DEBUG is not enabled. */ ++#define DWC_ASSERT(_expr, _format, _args...) do { \ ++ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \ ++ __FILE__, __LINE__, ## _args); } \ ++ } while (0) ++#else ++#define DWC_ASSERT(_x...) ++#endif ++#define dwc_assert DWC_ASSERT ++ ++ ++/** @name Byte Ordering ++ * The following functions are for conversions between processor's byte ordering ++ * and specific ordering you want. ++ */ ++ ++/** Converts 32 bit data in CPU byte ordering to little endian. */ ++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p); ++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 ++ ++/** Converts 32 bit data in CPU byte orderint to big endian. */ ++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p); ++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 ++ ++/** Converts 32 bit little endian data to CPU byte ordering. */ ++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p); ++#define dwc_le32_to_cpu DWC_LE32_TO_CPU ++ ++/** Converts 32 bit big endian data to CPU byte ordering. */ ++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p); ++#define dwc_be32_to_cpu DWC_BE32_TO_CPU ++ ++/** Converts 16 bit data in CPU byte ordering to little endian. */ ++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p); ++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 ++ ++/** Converts 16 bit data in CPU byte orderint to big endian. */ ++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p); ++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 ++ ++/** Converts 16 bit little endian data to CPU byte ordering. */ ++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p); ++#define dwc_le16_to_cpu DWC_LE16_TO_CPU ++ ++/** Converts 16 bit bi endian data to CPU byte ordering. */ ++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p); ++#define dwc_be16_to_cpu DWC_BE16_TO_CPU ++ ++ ++/** @name Register Read/Write ++ * ++ * The following six functions should be implemented to read/write registers of ++ * 32-bit and 64-bit sizes. All modules use this to read/write register values. ++ * The reg value is a pointer to the register calculated from the void *base ++ * variable passed into the driver when it is started. */ ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for register read/write, so we ++ * just throw away the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); ++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_) ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); ++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_) ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_) ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_) ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_) ++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_) ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef struct dwc_ioctx { ++ struct device *dev; ++ bus_space_tag_t iot; ++ bus_space_handle_t ioh; ++} dwc_ioctx_t; ++ ++/** BSD needs two extra parameters for register read/write, so we pass ++ * them in using the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg); ++#define dwc_read_reg32 DWC_READ_REG32 ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg); ++#define dwc_read_reg64 DWC_READ_REG64 ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32 DWC_WRITE_REG32 ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64 DWC_WRITE_REG64 ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32 DWC_MODIFY_REG32 ++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64 DWC_MODIFY_REG64 ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @cond */ ++ ++/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the ++ * register writes. */ ++ ++#ifdef DWC_LINUX ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @endcond */ ++ ++ ++#ifdef DWC_CRYPTOLIB ++/** @name Crypto Functions ++ * ++ * These are the low-level cryptographic functions used by the driver. */ ++ ++/** Perform AES CBC */ ++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); ++#define dwc_aes_cbc DWC_AES_CBC ++ ++/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ ++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); ++#define dwc_random_bytes DWC_RANDOM_BYTES ++ ++/** Perform the SHA-256 hash function */ ++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); ++#define dwc_sha256 DWC_SHA256 ++ ++/** Calculated the HMAC-SHA256 */ ++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); ++#define dwc_hmac_sha256 DWC_HMAC_SHA256 ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/** @name Memory Allocation ++ * ++ * These function provide access to memory allocation. There are only 2 DMA ++ * functions and 3 Regular memory functions that need to be implemented. None ++ * of the memory debugging routines need to be implemented. The allocation ++ * routines all ZERO the contents of the memory. ++ * ++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering. ++ * This checks for memory leaks, keeping track of alloc/free pairs. It also ++ * keeps track of how much memory the driver is using at any given time. */ ++ ++#define DWC_PAGE_SIZE 4096 ++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) ++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) ++ ++#define DWC_INVALID_DMA_ADDR 0x0 ++ ++#ifdef DWC_LINUX ++/** Type for a DMA address */ ++typedef dma_addr_t dwc_dma_t; ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef bus_addr_t dwc_dma_t; ++#endif ++ ++#ifdef DWC_FREEBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++#ifdef DWC_NETBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_dma_segment_t segs[1]; ++ int nsegs; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++/* @todo these functions will be added in the future */ ++#if 0 ++/** ++ * Creates a DMA pool from which you can allocate DMA buffers. Buffers ++ * allocated from this pool will be guaranteed to meet the size, alignment, and ++ * boundary requirements specified. ++ * ++ * @param[in] size Specifies the size of the buffers that will be allocated from ++ * this pool. ++ * @param[in] align Specifies the byte alignment requirements of the buffers ++ * allocated from this pool. Must be a power of 2. ++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from ++ * this pool must not cross. ++ * ++ * @returns A pointer to an internal opaque structure which is not to be ++ * accessed outside of these library functions. Use this handle to specify ++ * which pools to allocate/free DMA buffers from and also to destroy the pool, ++ * when you are done with it. ++ */ ++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); ++ ++/** ++ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. ++ */ ++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); ++ ++/** ++ * Allocate a buffer from the specified DMA pool and zeros its contents. ++ */ ++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); ++ ++/** ++ * Free a previously allocated buffer from the DMA pool. ++ */ ++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); ++#endif ++ ++/** Allocates a DMA capable buffer and zeroes its contents. */ ++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ ++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr); ++ ++/** Allocates a block of memory and zeroes its contents. */ ++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size); ++ ++/** Allocates a block of memory and zeroes its contents, in an atomic manner ++ * which can be used inside interrupt context. The size should be sufficiently ++ * small, a few KB at most, such that failures are not likely to occur. Can just call ++ * __DWC_ALLOC if it is atomic. */ ++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_FREE(void *mem_ctx, void *addr); ++ ++#ifndef DWC_DEBUG_MEMORY ++ ++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_) ++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_) ++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_dev, _size_, _dma_) __DWC_DMA_ALLOC(_dev, _size_, _dma_) ++#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) __DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) ++#define DWC_DMA_FREE(_dev, _size_,_virt_, _dma_) __DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC ++#define DWC_DMA_FREE __DWC_DMA_FREE ++# endif ++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); ++ ++#else /* DWC_DEBUG_MEMORY */ ++ ++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line); ++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line); ++ ++extern int dwc_memory_debug_start(void *mem_ctx); ++extern void dwc_memory_debug_stop(void); ++extern void dwc_memory_debug_report(void); ++ ++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__) ++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \ ++ __func__, __LINE__) ++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_dev, _size_, _dma_) \ ++ dwc_dma_alloc_debug(_dev, _size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) \ ++ dwc_dma_alloc_atomic_debug(_dev, _size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) \ ++ dwc_dma_free_debug(_dev, _size_, _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \ ++ _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \ ++ _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++#endif /* DWC_DEBUG_MEMORY */ ++ ++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_) ++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_) ++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_) ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we ++ * just throw away the DMA context parameter. ++ */ ++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_) ++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_) ++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs several extra parameters for DMA buffer allocation, so we pass ++ * them in using the DMA context parameter. ++ */ ++#define dwc_dma_alloc DWC_DMA_ALLOC ++#define dwc_dma_free DWC_DMA_FREE ++#endif ++ ++ ++/** @name Memory and String Processing */ ++ ++/** memset() clone */ ++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); ++#define dwc_memset DWC_MEMSET ++ ++/** memcpy() clone */ ++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); ++#define dwc_memcpy DWC_MEMCPY ++ ++/** memmove() clone */ ++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); ++#define dwc_memmove DWC_MEMMOVE ++ ++/** memcmp() clone */ ++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); ++#define dwc_memcmp DWC_MEMCMP ++ ++/** strcmp() clone */ ++extern int DWC_STRCMP(void *s1, void *s2); ++#define dwc_strcmp DWC_STRCMP ++ ++/** strncmp() clone */ ++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); ++#define dwc_strncmp DWC_STRNCMP ++ ++/** strlen() clone, for NULL terminated ASCII strings */ ++extern int DWC_STRLEN(char const *str); ++#define dwc_strlen DWC_STRLEN ++ ++/** strcpy() clone, for NULL terminated ASCII strings */ ++extern char *DWC_STRCPY(char *to, const char *from); ++#define dwc_strcpy DWC_STRCPY ++ ++/** strdup() clone. If you wish to use memory allocation debugging, this ++ * implementation of strdup should use the DWC_* memory routines instead of ++ * calling a predefined strdup. Otherwise the memory allocated by this routine ++ * will not be seen by the debugging routines. */ ++extern char *DWC_STRDUP(char const *str); ++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_) ++ ++/** NOT an atoi() clone. Read the description carefully. Returns an integer ++ * converted from the string str in base 10 unless the string begins with a "0x" ++ * in which case it is base 16. String must be a NULL terminated sequence of ++ * ASCII characters and may optionally begin with whitespace, a + or -, and a ++ * "0x" prefix if base 16. The remaining characters must be valid digits for ++ * the number and end with a NULL character. If any invalid characters are ++ * encountered or it returns with a negative error code and the results of the ++ * conversion are undefined. On sucess it returns 0. Overflow conditions are ++ * undefined. An example implementation using atoi() can be referenced from the ++ * Linux implementation. */ ++extern int DWC_ATOI(const char *str, int32_t *value); ++#define dwc_atoi DWC_ATOI ++ ++/** Same as above but for unsigned. */ ++extern int DWC_ATOUI(const char *str, uint32_t *value); ++#define dwc_atoui DWC_ATOUI ++ ++#ifdef DWC_UTFLIB ++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ ++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); ++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE ++#endif ++ ++ ++/** @name Wait queues ++ * ++ * Wait queues provide a means of synchronizing between threads or processes. A ++ * process can block on a waitq if some condition is not true, waiting for it to ++ * become true. When the waitq is triggered all waiting process will get ++ * unblocked and the condition will be check again. Waitqs should be triggered ++ * every time a condition can potentially change.*/ ++struct dwc_waitq; ++ ++/** Type for a waitq */ ++typedef struct dwc_waitq dwc_waitq_t; ++ ++/** The type of waitq condition callback function. This is called every time ++ * condition is evaluated. */ ++typedef int (*dwc_waitq_condition_t)(void *data); ++ ++/** Allocate a waitq */ ++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); ++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC() ++ ++/** Free a waitq */ ++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); ++#define dwc_waitq_free DWC_WAITQ_FREE ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, check the ++ * condition again. The function returns when the condition becomes true. The return value ++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ ++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data); ++#define dwc_waitq_wait DWC_WAITQ_WAIT ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, ++ * check the condition again. The function returns when the condition become ++ * true or the timeout has passed. The return value is 0 on condition true or ++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on ++ * error. */ ++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs); ++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT ++ ++/** Trigger a waitq, unblocking all processes. This should be called whenever a condition ++ * has potentially changed. */ ++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); ++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER ++ ++/** Unblock all processes waiting on the waitq with an ABORTED result. */ ++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); ++#define dwc_waitq_abort DWC_WAITQ_ABORT ++ ++ ++/** @name Threads ++ * ++ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP ++ * whenever it is woken up, and then return. The DWC_THREAD_STOP function ++ * returns the value from the thread. ++ */ ++ ++struct dwc_thread; ++ ++/** Type for a thread */ ++typedef struct dwc_thread dwc_thread_t; ++ ++/** The thread function */ ++typedef int (*dwc_thread_function_t)(void *data); ++ ++/** Create a thread and start it running the thread_function. Returns a handle ++ * to the thread */ ++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data); ++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_) ++ ++/** Stops a thread. Return the value returned by the thread. Or will return ++ * DWC_ABORT if the thread never started. */ ++extern int DWC_THREAD_STOP(dwc_thread_t *thread); ++#define dwc_thread_stop DWC_THREAD_STOP ++ ++/** Signifies to the thread that it must stop. */ ++#ifdef DWC_LINUX ++/* Linux doesn't need any parameters for kthread_should_stop() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); ++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP() ++ ++/* No thread_exit function in Linux */ ++#define dwc_thread_exit(_thrd_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs the thread pointer for kthread_suspend_check() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread); ++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP ++ ++/** The thread must call this to exit. */ ++extern void DWC_THREAD_EXIT(dwc_thread_t *thread); ++#define dwc_thread_exit DWC_THREAD_EXIT ++#endif ++ ++ ++/** @name Work queues ++ * ++ * Workqs are used to queue a callback function to be called at some later time, ++ * in another thread. */ ++struct dwc_workq; ++ ++/** Type for a workq */ ++typedef struct dwc_workq dwc_workq_t; ++ ++/** The type of the callback function to be called. */ ++typedef void (*dwc_work_callback_t)(void *data); ++ ++/** Allocate a workq */ ++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); ++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_) ++ ++/** Free a workq. All work must be completed before being freed. */ ++extern void DWC_WORKQ_FREE(dwc_workq_t *workq); ++#define dwc_workq_free DWC_WORKQ_FREE ++ ++/** Schedule a callback on the workq, passing in data. The function will be ++ * scheduled at some later time. */ ++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 4, 5))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE ++ ++/** Schedule a callback on the workq, that will be called until at least ++ * given number miliseconds have passed. */ ++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 5, 6))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED ++ ++/** The number of processes in the workq */ ++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); ++#define dwc_workq_pending DWC_WORKQ_PENDING ++ ++/** Blocks until all the work in the workq is complete or timed out. Returns < ++ * 0 on timeout. */ ++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); ++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE ++ ++ ++/** @name Tasklets ++ * ++ */ ++struct dwc_tasklet; ++ ++/** Type for a tasklet */ ++typedef struct dwc_tasklet dwc_tasklet_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_tasklet_callback_t)(void *data); ++ ++/** Allocates a tasklet */ ++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data); ++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_) ++ ++/** Frees a tasklet */ ++extern void DWC_TASK_FREE(dwc_tasklet_t *task); ++#define dwc_task_free DWC_TASK_FREE ++ ++/** Schedules a tasklet to run */ ++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_schedule DWC_TASK_SCHEDULE ++ ++extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE ++ ++/** @name Timer ++ * ++ * Callbacks must be small and atomic. ++ */ ++struct dwc_timer; ++ ++/** Type for a timer */ ++typedef struct dwc_timer dwc_timer_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_timer_callback_t)(void *data); ++ ++/** Allocates a timer */ ++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); ++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_) ++ ++/** Frees a timer */ ++extern void DWC_TIMER_FREE(dwc_timer_t *timer); ++#define dwc_timer_free DWC_TIMER_FREE ++ ++/** Schedules the timer to run at time ms from now. And will repeat at every ++ * repeat_interval msec therafter ++ * ++ * Modifies a timer that is still awaiting execution to a new expiration time. ++ * The mod_time is added to the old time. */ ++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); ++#define dwc_timer_schedule DWC_TIMER_SCHEDULE ++ ++/** Disables the timer from execution. */ ++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); ++#define dwc_timer_cancel DWC_TIMER_CANCEL ++ ++ ++/** @name Spinlocks ++ * ++ * These locks are used when the work between the lock/unlock is atomic and ++ * short. Interrupts are also disabled during the lock/unlock and thus they are ++ * suitable to lock between interrupt/non-interrupt context. They also lock ++ * between processes if you have multiple CPUs or Preemption. If you don't have ++ * multiple CPUS or Preemption, then the you can simply implement the ++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because ++ * the work between the lock/unlock is atomic, the process context will never ++ * change, and so you never have to lock between processes. */ ++ ++struct dwc_spinlock; ++ ++/** Type for a spinlock */ ++typedef struct dwc_spinlock dwc_spinlock_t; ++ ++/** Type for the 'flags' argument to spinlock funtions */ ++typedef unsigned long dwc_irqflags_t; ++ ++/** Returns an initialized lock variable. This function should allocate and ++ * initialize the OS-specific data structure used for locking. This data ++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should ++ * be freed by the DWC_FREE_LOCK when it is no longer used. ++ * ++ * For Linux Spinlock Debugging make it macro because the debugging routines use ++ * the symbol name to determine recursive locking. Using a wrapper function ++ * makes it falsely think recursive locking occurs. */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK) ++#define DWC_SPINLOCK_ALLOC_LINUX_DEBUG(lock) ({ \ ++ lock = DWC_ALLOC(sizeof(spinlock_t)); \ ++ if (lock) { \ ++ spin_lock_init((spinlock_t *)lock); \ ++ } \ ++}) ++#else ++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); ++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC() ++#endif ++ ++/** Frees an initialized lock variable. */ ++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); ++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_) ++ ++/** Disables interrupts and blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. ++ */ ++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags); ++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE ++ ++/** Re-enables the interrupt and releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. Must be the same as was ++ * passed into DWC_LOCK. ++ */ ++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags); ++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE ++ ++/** Blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINLOCK(dwc_spinlock_t *lock); ++#define dwc_spinlock DWC_SPINLOCK ++ ++/** Releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); ++#define dwc_spinunlock DWC_SPINUNLOCK ++ ++ ++/** @name Mutexes ++ * ++ * Unlike spinlocks Mutexes lock only between processes and the work between the ++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. ++ */ ++ ++struct dwc_mutex; ++ ++/** Type for a mutex */ ++typedef struct dwc_mutex dwc_mutex_t; ++ ++/* For Linux Mutex Debugging make it inline because the debugging routines use ++ * the symbol to determine recursive locking. This makes it falsely think ++ * recursive locking occurs. */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ ++ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ ++ mutex_init((struct mutex *)__mutexp); \ ++}) ++#endif ++ ++/** Allocate a mutex */ ++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); ++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC() ++ ++/* For memory leak debugging when using Linux Mutex Debugging */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_FREE(__mutexp) do { \ ++ mutex_destroy((struct mutex *)__mutexp); \ ++ DWC_FREE(__mutexp); \ ++} while(0) ++#else ++/** Free a mutex */ ++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); ++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_) ++#endif ++ ++/** Lock a mutex */ ++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_lock DWC_MUTEX_LOCK ++ ++/** Non-blocking lock returns 1 on successful lock. */ ++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK ++ ++/** Unlock a mutex */ ++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK ++ ++ ++/** @name Time */ ++ ++/** Microsecond delay. ++ * ++ * @param usecs Microseconds to delay. ++ */ ++extern void DWC_UDELAY(uint32_t usecs); ++#define dwc_udelay DWC_UDELAY ++ ++/** Millisecond delay. ++ * ++ * @param msecs Milliseconds to delay. ++ */ ++extern void DWC_MDELAY(uint32_t msecs); ++#define dwc_mdelay DWC_MDELAY ++ ++/** Non-busy waiting. ++ * Sleeps for specified number of milliseconds. ++ * ++ * @param msecs Milliseconds to sleep. ++ */ ++extern void DWC_MSLEEP(uint32_t msecs); ++#define dwc_msleep DWC_MSLEEP ++ ++/** ++ * Returns number of milliseconds since boot. ++ */ ++extern uint32_t DWC_TIME(void); ++#define dwc_time DWC_TIME ++ ++ ++ ++ ++/* @mainpage DWC Portability and Common Library ++ * ++ * This is the documentation for the DWC Portability and Common Library. ++ * ++ * @section intro Introduction ++ * ++ * The DWC Portability library consists of wrapper calls and data structures to ++ * all low-level functions which are typically provided by the OS. The WUDEV ++ * driver uses only these functions. In order to port the WUDEV driver, only ++ * the functions in this library need to be re-implemented, with the same ++ * behavior as documented here. ++ * ++ * The Common library consists of higher level functions, which rely only on ++ * calling the functions from the DWC Portability library. These common ++ * routines are shared across modules. Some of the common libraries need to be ++ * used directly by the driver programmer when porting WUDEV. Such as the ++ * parameter and notification libraries. ++ * ++ * @section low Portability Library OS Wrapper Functions ++ * ++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that ++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of ++ * these functions are included in the dwc_os.h file. ++ * ++ * There are many functions here covering a wide array of OS services. Please ++ * see dwc_os.h for details, and implementation notes for each function. ++ * ++ * @section common Common Library Functions ++ * ++ * Any function starting with dwc and in all lowercase is a common library ++ * routine. These functions have a portable implementation and do not need to ++ * be reimplemented when porting. The common routines can be used by any ++ * driver, and some must be used by the end user to control the drivers. For ++ * example, you must use the Parameter common library in order to set the ++ * parameters in the WUDEV module. ++ * ++ * The common libraries consist of the following: ++ * ++ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h ++ * - Parameters - Used internally and can be used by end-user. See dwc_params.h ++ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h ++ * - Lists - Used internally and can be used by end-user. See dwc_list.h ++ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h ++ * - Modpow - Used internally only. See dwc_modpow.h ++ * - DH - Used internally only. See dwc_dh.h ++ * - Crypto - Used internally only. See dwc_crypto.h ++ * ++ * ++ * @section prereq Prerequistes For dwc_os.h ++ * @subsection types Data Types ++ * ++ * The dwc_os.h file assumes that several low-level data types are pre defined for the ++ * compilation environment. These data types are: ++ * ++ * - uint8_t - unsigned 8-bit data type ++ * - int8_t - signed 8-bit data type ++ * - uint16_t - unsigned 16-bit data type ++ * - int16_t - signed 16-bit data type ++ * - uint32_t - unsigned 32-bit data type ++ * - int32_t - signed 32-bit data type ++ * - uint64_t - unsigned 64-bit data type ++ * - int64_t - signed 64-bit data type ++ * ++ * Ensure that these are defined before using dwc_os.h. The easiest way to do ++ * that is to modify the top of the file to include the appropriate header. ++ * This is already done for the Linux environment. If the DWC_LINUX macro is ++ * defined, the correct header will be added. A standard header is ++ * also used for environments where standard C headers are available. ++ * ++ * @subsection stdarg Variable Arguments ++ * ++ * Variable arguments are provided by a standard C header . it is ++ * available in Both the Linux and ANSI C enviornment. An equivalent must be ++ * provided in your enviornment in order to use dwc_os.h with the debug and ++ * tracing message functionality. ++ * ++ * @subsection thread Threading ++ * ++ * WUDEV Core must be run on an operating system that provides for multiple ++ * threads/processes. Threading can be implemented in many ways, even in ++ * embedded systems without an operating system. At the bare minimum, the ++ * system should be able to start any number of processes at any time to handle ++ * special work. It need not be a pre-emptive system. Process context can ++ * change upon a call to a blocking function. The hardware interrupt context ++ * that calls the module's ISR() function must be differentiable from process ++ * context, even if your processes are impemented via a hardware interrupt. ++ * Further locking mechanism between process must exist (or be implemented), and ++ * process context must have a way to disable interrupts for a period of time to ++ * lock them out. If all of this exists, the functions in dwc_os.h related to ++ * threading should be able to be implemented with the defined behavior. ++ * ++ */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_OS_H_ */ +diff --git a/drivers/usb/host/dwc_common_port/usb.h b/drivers/usb/host/dwc_common_port/usb.h +new file mode 100644 +index 000000000000..27bda82dac2e +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/usb.h +@@ -0,0 +1,946 @@ ++/* ++ * Copyright (c) 1998 The NetBSD Foundation, Inc. ++ * All rights reserved. ++ * ++ * This code is derived from software contributed to The NetBSD Foundation ++ * by Lennart Augustsson (lennart@augustsson.net) at ++ * Carlstedt Research & Technology. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. All advertising materials mentioning features or use of this software ++ * must display the following acknowledgement: ++ * This product includes software developed by the NetBSD ++ * Foundation, Inc. and its contributors. ++ * 4. Neither the name of The NetBSD Foundation nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS ++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++/* Modified by Synopsys, Inc, 12/12/2007 */ ++ ++ ++#ifndef _USB_H_ ++#define _USB_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/* ++ * The USB records contain some unaligned little-endian word ++ * components. The U[SG]ETW macros take care of both the alignment ++ * and endian problem and should always be used to access non-byte ++ * values. ++ */ ++typedef u_int8_t uByte; ++typedef u_int8_t uWord[2]; ++typedef u_int8_t uDWord[4]; ++ ++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) ++#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff } ++#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \ ++ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff } ++ ++#if 1 ++#define UGETW(w) ((w)[0] | ((w)[1] << 8)) ++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) ++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) ++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ ++ (w)[1] = (u_int8_t)((v) >> 8), \ ++ (w)[2] = (u_int8_t)((v) >> 16), \ ++ (w)[3] = (u_int8_t)((v) >> 24)) ++#else ++/* ++ * On little-endian machines that can handle unanliged accesses ++ * (e.g. i386) these macros can be replaced by the following. ++ */ ++#define UGETW(w) (*(u_int16_t *)(w)) ++#define USETW(w,v) (*(u_int16_t *)(w) = (v)) ++#define UGETDW(w) (*(u_int32_t *)(w)) ++#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) ++#endif ++ ++/* ++ * Macros for accessing UAS IU fields, which are big-endian ++ */ ++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l)) ++#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ ++ ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUGETW(w) (((w)[0] << 8) | (w)[1]) ++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v)) ++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3]) ++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \ ++ (w)[1] = (u_int8_t)((v) >> 16), \ ++ (w)[2] = (u_int8_t)((v) >> 8), \ ++ (w)[3] = (u_int8_t)(v)) ++ ++#define UPACKED __attribute__((__packed__)) ++ ++typedef struct { ++ uByte bmRequestType; ++ uByte bRequest; ++ uWord wValue; ++ uWord wIndex; ++ uWord wLength; ++} UPACKED usb_device_request_t; ++ ++#define UT_GET_DIR(a) ((a) & 0x80) ++#define UT_WRITE 0x00 ++#define UT_READ 0x80 ++ ++#define UT_GET_TYPE(a) ((a) & 0x60) ++#define UT_STANDARD 0x00 ++#define UT_CLASS 0x20 ++#define UT_VENDOR 0x40 ++ ++#define UT_GET_RECIPIENT(a) ((a) & 0x1f) ++#define UT_DEVICE 0x00 ++#define UT_INTERFACE 0x01 ++#define UT_ENDPOINT 0x02 ++#define UT_OTHER 0x03 ++ ++#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) ++#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) ++#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) ++#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) ++#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) ++#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) ++#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) ++#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) ++#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) ++#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) ++#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) ++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) ++#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) ++#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) ++#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) ++#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) ++#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) ++#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) ++#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) ++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) ++#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) ++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) ++ ++/* Requests */ ++#define UR_GET_STATUS 0x00 ++#define USTAT_STANDARD_STATUS 0x00 ++#define WUSTAT_WUSB_FEATURE 0x01 ++#define WUSTAT_CHANNEL_INFO 0x02 ++#define WUSTAT_RECEIVED_DATA 0x03 ++#define WUSTAT_MAS_AVAILABILITY 0x04 ++#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 ++#define UR_CLEAR_FEATURE 0x01 ++#define UR_SET_FEATURE 0x03 ++#define UR_SET_AND_TEST_FEATURE 0x0c ++#define UR_SET_ADDRESS 0x05 ++#define UR_GET_DESCRIPTOR 0x06 ++#define UDESC_DEVICE 0x01 ++#define UDESC_CONFIG 0x02 ++#define UDESC_STRING 0x03 ++#define UDESC_INTERFACE 0x04 ++#define UDESC_ENDPOINT 0x05 ++#define UDESC_SS_USB_COMPANION 0x30 ++#define UDESC_DEVICE_QUALIFIER 0x06 ++#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 ++#define UDESC_INTERFACE_POWER 0x08 ++#define UDESC_OTG 0x09 ++#define WUDESC_SECURITY 0x0c ++#define WUDESC_KEY 0x0d ++#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) ++#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) ++#define WUD_KEY_TYPE_ASSOC 0x01 ++#define WUD_KEY_TYPE_GTK 0x02 ++#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) ++#define WUD_KEY_ORIGIN_HOST 0x00 ++#define WUD_KEY_ORIGIN_DEVICE 0x01 ++#define WUDESC_ENCRYPTION_TYPE 0x0e ++#define WUDESC_BOS 0x0f ++#define WUDESC_DEVICE_CAPABILITY 0x10 ++#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 ++#define UDESC_BOS 0x0f ++#define UDESC_DEVICE_CAPABILITY 0x10 ++#define UDESC_CS_DEVICE 0x21 /* class specific */ ++#define UDESC_CS_CONFIG 0x22 ++#define UDESC_CS_STRING 0x23 ++#define UDESC_CS_INTERFACE 0x24 ++#define UDESC_CS_ENDPOINT 0x25 ++#define UDESC_HUB 0x29 ++#define UR_SET_DESCRIPTOR 0x07 ++#define UR_GET_CONFIG 0x08 ++#define UR_SET_CONFIG 0x09 ++#define UR_GET_INTERFACE 0x0a ++#define UR_SET_INTERFACE 0x0b ++#define UR_SYNCH_FRAME 0x0c ++#define WUR_SET_ENCRYPTION 0x0d ++#define WUR_GET_ENCRYPTION 0x0e ++#define WUR_SET_HANDSHAKE 0x0f ++#define WUR_GET_HANDSHAKE 0x10 ++#define WUR_SET_CONNECTION 0x11 ++#define WUR_SET_SECURITY_DATA 0x12 ++#define WUR_GET_SECURITY_DATA 0x13 ++#define WUR_SET_WUSB_DATA 0x14 ++#define WUDATA_DRPIE_INFO 0x01 ++#define WUDATA_TRANSMIT_DATA 0x02 ++#define WUDATA_TRANSMIT_PARAMS 0x03 ++#define WUDATA_RECEIVE_PARAMS 0x04 ++#define WUDATA_TRANSMIT_POWER 0x05 ++#define WUR_LOOPBACK_DATA_WRITE 0x15 ++#define WUR_LOOPBACK_DATA_READ 0x16 ++#define WUR_SET_INTERFACE_DS 0x17 ++ ++/* Feature numbers */ ++#define UF_ENDPOINT_HALT 0 ++#define UF_DEVICE_REMOTE_WAKEUP 1 ++#define UF_TEST_MODE 2 ++#define UF_DEVICE_B_HNP_ENABLE 3 ++#define UF_DEVICE_A_HNP_SUPPORT 4 ++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 ++#define WUF_WUSB 3 ++#define WUF_TX_DRPIE 0x0 ++#define WUF_DEV_XMIT_PACKET 0x1 ++#define WUF_COUNT_PACKETS 0x2 ++#define WUF_CAPTURE_PACKETS 0x3 ++#define UF_FUNCTION_SUSPEND 0 ++#define UF_U1_ENABLE 48 ++#define UF_U2_ENABLE 49 ++#define UF_LTM_ENABLE 50 ++ ++/* Class requests from the USB 2.0 hub spec, table 11-15 */ ++#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) ++#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) ++#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) ++#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) ++#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) ++#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) ++#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) ++#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDescriptorSubtype; ++} UPACKED usb_descriptor_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++} UPACKED usb_descriptor_header_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++#define UD_USB_2_0 0x0200 ++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize; ++ /* The fields below are not part of the initial descriptor. */ ++ uWord idVendor; ++ uWord idProduct; ++ uWord bcdDevice; ++ uByte iManufacturer; ++ uByte iProduct; ++ uByte iSerialNumber; ++ uByte bNumConfigurations; ++} UPACKED usb_device_descriptor_t; ++#define USB_DEVICE_DESCRIPTOR_SIZE 18 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumInterface; ++ uByte bConfigurationValue; ++ uByte iConfiguration; ++#define UC_ATT_ONE (1 << 7) /* must be set */ ++#define UC_ATT_SELFPOWER (1 << 6) /* self powered */ ++#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */ ++#define UC_ATT_BATTERY (1 << 4) /* battery powered */ ++ uByte bmAttributes; ++#define UC_BUS_POWERED 0x80 ++#define UC_SELF_POWERED 0x40 ++#define UC_REMOTE_WAKEUP 0x20 ++ uByte bMaxPower; /* max current in 2 mA units */ ++#define UC_POWER_FACTOR 2 ++} UPACKED usb_config_descriptor_t; ++#define USB_CONFIG_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bInterfaceNumber; ++ uByte bAlternateSetting; ++ uByte bNumEndpoints; ++ uByte bInterfaceClass; ++ uByte bInterfaceSubClass; ++ uByte bInterfaceProtocol; ++ uByte iInterface; ++} UPACKED usb_interface_descriptor_t; ++#define USB_INTERFACE_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bEndpointAddress; ++#define UE_GET_DIR(a) ((a) & 0x80) ++#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) ++#define UE_DIR_IN 0x80 ++#define UE_DIR_OUT 0x00 ++#define UE_ADDR 0x0f ++#define UE_GET_ADDR(a) ((a) & UE_ADDR) ++ uByte bmAttributes; ++#define UE_XFERTYPE 0x03 ++#define UE_CONTROL 0x00 ++#define UE_ISOCHRONOUS 0x01 ++#define UE_BULK 0x02 ++#define UE_INTERRUPT 0x03 ++#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) ++#define UE_ISO_TYPE 0x0c ++#define UE_ISO_ASYNC 0x04 ++#define UE_ISO_ADAPT 0x08 ++#define UE_ISO_SYNC 0x0c ++#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) ++ uWord wMaxPacketSize; ++ uByte bInterval; ++} UPACKED usb_endpoint_descriptor_t; ++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 ++ ++typedef struct ss_endpoint_companion_descriptor { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f) ++#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f)) ++#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03) ++#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03)) ++ uByte bmAttributes; ++ uWord wBytesPerInterval; ++} UPACKED ss_endpoint_companion_descriptor_t; ++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bString[127]; ++} UPACKED usb_string_descriptor_t; ++#define USB_MAX_STRING_LEN 128 ++#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ ++ ++/* Hub specific request */ ++#define UR_GET_BUS_STATE 0x02 ++#define UR_CLEAR_TT_BUFFER 0x08 ++#define UR_RESET_TT 0x09 ++#define UR_GET_TT_STATE 0x0a ++#define UR_STOP_TT 0x0b ++ ++/* Hub features */ ++#define UHF_C_HUB_LOCAL_POWER 0 ++#define UHF_C_HUB_OVER_CURRENT 1 ++#define UHF_PORT_CONNECTION 0 ++#define UHF_PORT_ENABLE 1 ++#define UHF_PORT_SUSPEND 2 ++#define UHF_PORT_OVER_CURRENT 3 ++#define UHF_PORT_RESET 4 ++#define UHF_PORT_L1 5 ++#define UHF_PORT_POWER 8 ++#define UHF_PORT_LOW_SPEED 9 ++#define UHF_PORT_HIGH_SPEED 10 ++#define UHF_C_PORT_CONNECTION 16 ++#define UHF_C_PORT_ENABLE 17 ++#define UHF_C_PORT_SUSPEND 18 ++#define UHF_C_PORT_OVER_CURRENT 19 ++#define UHF_C_PORT_RESET 20 ++#define UHF_C_PORT_L1 23 ++#define UHF_PORT_TEST 21 ++#define UHF_PORT_INDICATOR 22 ++ ++typedef struct { ++ uByte bDescLength; ++ uByte bDescriptorType; ++ uByte bNbrPorts; ++ uWord wHubCharacteristics; ++#define UHD_PWR 0x0003 ++#define UHD_PWR_GANGED 0x0000 ++#define UHD_PWR_INDIVIDUAL 0x0001 ++#define UHD_PWR_NO_SWITCH 0x0002 ++#define UHD_COMPOUND 0x0004 ++#define UHD_OC 0x0018 ++#define UHD_OC_GLOBAL 0x0000 ++#define UHD_OC_INDIVIDUAL 0x0008 ++#define UHD_OC_NONE 0x0010 ++#define UHD_TT_THINK 0x0060 ++#define UHD_TT_THINK_8 0x0000 ++#define UHD_TT_THINK_16 0x0020 ++#define UHD_TT_THINK_24 0x0040 ++#define UHD_TT_THINK_32 0x0060 ++#define UHD_PORT_IND 0x0080 ++ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ ++#define UHD_PWRON_FACTOR 2 ++ uByte bHubContrCurrent; ++ uByte DeviceRemovable[32]; /* max 255 ports */ ++#define UHD_NOT_REMOV(desc, i) \ ++ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) ++ /* deprecated */ uByte PortPowerCtrlMask[1]; ++} UPACKED usb_hub_descriptor_t; ++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize0; ++ uByte bNumConfigurations; ++ uByte bReserved; ++} UPACKED usb_device_qualifier_t; ++#define USB_DEVICE_QUALIFIER_SIZE 10 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bmAttributes; ++#define UOTG_SRP 0x01 ++#define UOTG_HNP 0x02 ++} UPACKED usb_otg_descriptor_t; ++ ++/* OTG feature selectors */ ++#define UOTG_B_HNP_ENABLE 3 ++#define UOTG_A_HNP_SUPPORT 4 ++#define UOTG_A_ALT_HNP_SUPPORT 5 ++ ++typedef struct { ++ uWord wStatus; ++/* Device status flags */ ++#define UDS_SELF_POWERED 0x0001 ++#define UDS_REMOTE_WAKEUP 0x0002 ++/* Endpoint status flags */ ++#define UES_HALT 0x0001 ++} UPACKED usb_status_t; ++ ++typedef struct { ++ uWord wHubStatus; ++#define UHS_LOCAL_POWER 0x0001 ++#define UHS_OVER_CURRENT 0x0002 ++ uWord wHubChange; ++} UPACKED usb_hub_status_t; ++ ++typedef struct { ++ uWord wPortStatus; ++#define UPS_CURRENT_CONNECT_STATUS 0x0001 ++#define UPS_PORT_ENABLED 0x0002 ++#define UPS_SUSPEND 0x0004 ++#define UPS_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_RESET 0x0010 ++#define UPS_PORT_POWER 0x0100 ++#define UPS_LOW_SPEED 0x0200 ++#define UPS_HIGH_SPEED 0x0400 ++#define UPS_PORT_TEST 0x0800 ++#define UPS_PORT_INDICATOR 0x1000 ++ uWord wPortChange; ++#define UPS_C_CONNECT_STATUS 0x0001 ++#define UPS_C_PORT_ENABLED 0x0002 ++#define UPS_C_SUSPEND 0x0004 ++#define UPS_C_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_C_PORT_RESET 0x0010 ++} UPACKED usb_port_status_t; ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++/* Device class codes */ ++#define UDCLASS_IN_INTERFACE 0x00 ++#define UDCLASS_COMM 0x02 ++#define UDCLASS_HUB 0x09 ++#define UDSUBCLASS_HUB 0x00 ++#define UDPROTO_FSHUB 0x00 ++#define UDPROTO_HSHUBSTT 0x01 ++#define UDPROTO_HSHUBMTT 0x02 ++#define UDCLASS_DIAGNOSTIC 0xdc ++#define UDCLASS_WIRELESS 0xe0 ++#define UDSUBCLASS_RF 0x01 ++#define UDPROTO_BLUETOOTH 0x01 ++#define UDCLASS_VENDOR 0xff ++ ++/* Interface class codes */ ++#define UICLASS_UNSPEC 0x00 ++ ++#define UICLASS_AUDIO 0x01 ++#define UISUBCLASS_AUDIOCONTROL 1 ++#define UISUBCLASS_AUDIOSTREAM 2 ++#define UISUBCLASS_MIDISTREAM 3 ++ ++#define UICLASS_CDC 0x02 /* communication */ ++#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 ++#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 ++#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 ++#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 ++#define UISUBCLASS_CAPI_CONTROLMODEL 5 ++#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 ++#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 ++#define UIPROTO_CDC_AT 1 ++ ++#define UICLASS_HID 0x03 ++#define UISUBCLASS_BOOT 1 ++#define UIPROTO_BOOT_KEYBOARD 1 ++ ++#define UICLASS_PHYSICAL 0x05 ++ ++#define UICLASS_IMAGE 0x06 ++ ++#define UICLASS_PRINTER 0x07 ++#define UISUBCLASS_PRINTER 1 ++#define UIPROTO_PRINTER_UNI 1 ++#define UIPROTO_PRINTER_BI 2 ++#define UIPROTO_PRINTER_1284 3 ++ ++#define UICLASS_MASS 0x08 ++#define UISUBCLASS_RBC 1 ++#define UISUBCLASS_SFF8020I 2 ++#define UISUBCLASS_QIC157 3 ++#define UISUBCLASS_UFI 4 ++#define UISUBCLASS_SFF8070I 5 ++#define UISUBCLASS_SCSI 6 ++#define UIPROTO_MASS_CBI_I 0 ++#define UIPROTO_MASS_CBI 1 ++#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ ++#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ ++ ++#define UICLASS_HUB 0x09 ++#define UISUBCLASS_HUB 0 ++#define UIPROTO_FSHUB 0 ++#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ ++#define UIPROTO_HSHUBMTT 1 ++ ++#define UICLASS_CDC_DATA 0x0a ++#define UISUBCLASS_DATA 0 ++#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ ++#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ ++#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ ++#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ ++#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ ++#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ ++#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ ++#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ ++#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ ++#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ ++#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ ++#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ ++#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ ++ ++#define UICLASS_SMARTCARD 0x0b ++ ++/*#define UICLASS_FIRM_UPD 0x0c*/ ++ ++#define UICLASS_SECURITY 0x0d ++ ++#define UICLASS_DIAGNOSTIC 0xdc ++ ++#define UICLASS_WIRELESS 0xe0 ++#define UISUBCLASS_RF 0x01 ++#define UIPROTO_BLUETOOTH 0x01 ++ ++#define UICLASS_APPL_SPEC 0xfe ++#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 ++#define UISUBCLASS_IRDA 2 ++#define UIPROTO_IRDA 0 ++ ++#define UICLASS_VENDOR 0xff ++ ++#define USB_HUB_MAX_DEPTH 5 ++ ++/* ++ * Minimum time a device needs to be powered down to go through ++ * a power cycle. XXX Are these time in the spec? ++ */ ++#define USB_POWER_DOWN_TIME 200 /* ms */ ++#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ ++ ++#if 0 ++/* These are the values from the spec. */ ++#define USB_PORT_RESET_DELAY 10 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_RESET_RECOVERY 10 /* ms */ ++#define USB_PORT_POWERUP_DELAY 100 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 2 /* ms */ ++#define USB_RESUME_DELAY (20*5) /* ms */ ++#define USB_RESUME_WAIT 10 /* ms */ ++#define USB_RESUME_RECOVERY 10 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ ++#else ++/* Allow for marginal (i.e. non-conforming) devices. */ ++#define USB_PORT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ ++#define USB_PORT_RESET_RECOVERY 250 /* ms */ ++#define USB_PORT_POWERUP_DELAY 300 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 10 /* ms */ ++#define USB_RESUME_DELAY (50*5) /* ms */ ++#define USB_RESUME_WAIT 50 /* ms */ ++#define USB_RESUME_RECOVERY 50 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ ++#endif ++ ++#define USB_MIN_POWER 100 /* mA */ ++#define USB_MAX_POWER 500 /* mA */ ++ ++#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ ++ ++#define USB_UNCONFIG_NO 0 ++#define USB_UNCONFIG_INDEX (-1) ++ ++/*** ioctl() related stuff ***/ ++ ++struct usb_ctl_request { ++ int ucr_addr; ++ usb_device_request_t ucr_request; ++ void *ucr_data; ++ int ucr_flags; ++#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ ++ int ucr_actlen; /* actual length transferred */ ++}; ++ ++struct usb_alt_interface { ++ int uai_config_index; ++ int uai_interface_index; ++ int uai_alt_no; ++}; ++ ++#define USB_CURRENT_CONFIG_INDEX (-1) ++#define USB_CURRENT_ALT_INDEX (-1) ++ ++struct usb_config_desc { ++ int ucd_config_index; ++ usb_config_descriptor_t ucd_desc; ++}; ++ ++struct usb_interface_desc { ++ int uid_config_index; ++ int uid_interface_index; ++ int uid_alt_index; ++ usb_interface_descriptor_t uid_desc; ++}; ++ ++struct usb_endpoint_desc { ++ int ued_config_index; ++ int ued_interface_index; ++ int ued_alt_index; ++ int ued_endpoint_index; ++ usb_endpoint_descriptor_t ued_desc; ++}; ++ ++struct usb_full_desc { ++ int ufd_config_index; ++ u_int ufd_size; ++ u_char *ufd_data; ++}; ++ ++struct usb_string_desc { ++ int usd_string_index; ++ int usd_language_id; ++ usb_string_descriptor_t usd_desc; ++}; ++ ++struct usb_ctl_report_desc { ++ int ucrd_size; ++ u_char ucrd_data[1024]; /* filled data size will vary */ ++}; ++ ++typedef struct { u_int32_t cookie; } usb_event_cookie_t; ++ ++#define USB_MAX_DEVNAMES 4 ++#define USB_MAX_DEVNAMELEN 16 ++struct usb_device_info { ++ u_int8_t udi_bus; ++ u_int8_t udi_addr; /* device address */ ++ usb_event_cookie_t udi_cookie; ++ char udi_product[USB_MAX_STRING_LEN]; ++ char udi_vendor[USB_MAX_STRING_LEN]; ++ char udi_release[8]; ++ u_int16_t udi_productNo; ++ u_int16_t udi_vendorNo; ++ u_int16_t udi_releaseNo; ++ u_int8_t udi_class; ++ u_int8_t udi_subclass; ++ u_int8_t udi_protocol; ++ u_int8_t udi_config; ++ u_int8_t udi_speed; ++#define USB_SPEED_UNKNOWN 0 ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_VARIABLE 4 ++#define USB_SPEED_SUPER 5 ++ int udi_power; /* power consumption in mA, 0 if selfpowered */ ++ int udi_nports; ++ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; ++ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ ++#define USB_PORT_ENABLED 0xff ++#define USB_PORT_SUSPENDED 0xfe ++#define USB_PORT_POWERED 0xfd ++#define USB_PORT_DISABLED 0xfc ++}; ++ ++struct usb_ctl_report { ++ int ucr_report; ++ u_char ucr_data[1024]; /* filled data size will vary */ ++}; ++ ++struct usb_device_stats { ++ u_long uds_requests[4]; /* indexed by transfer type UE_* */ ++}; ++ ++#define WUSB_MIN_IE 0x80 ++#define WUSB_WCTA_IE 0x80 ++#define WUSB_WCONNECTACK_IE 0x81 ++#define WUSB_WHOSTINFO_IE 0x82 ++#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) ++#define WUHI_CA_RECONN 0x00 ++#define WUHI_CA_LIMITED 0x01 ++#define WUHI_CA_ALL 0x03 ++#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) ++#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 ++#define WUSB_WDEV_DISCONNECT_IE 0x84 ++#define WUSB_WHOST_DISCONNECT_IE 0x85 ++#define WUSB_WRELEASE_CHANNEL_IE 0x86 ++#define WUSB_WWORK_IE 0x87 ++#define WUSB_WCHANNEL_STOP_IE 0x88 ++#define WUSB_WDEV_KEEPALIVE_IE 0x89 ++#define WUSB_WISOCH_DISCARD_IE 0x8A ++#define WUSB_WRESETDEVICE_IE 0x8B ++#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C ++#define WUSB_MAX_IE 0x8C ++ ++/* Device Notification Types */ ++ ++#define WUSB_DN_MIN 0x01 ++#define WUSB_DN_CONNECT 0x01 ++# define WUSB_DA_OLDCONN 0x00 ++# define WUSB_DA_NEWCONN 0x01 ++# define WUSB_DA_SELF_BEACON 0x02 ++# define WUSB_DA_DIR_BEACON 0x04 ++# define WUSB_DA_NO_BEACON 0x06 ++#define WUSB_DN_DISCONNECT 0x02 ++#define WUSB_DN_EPRDY 0x03 ++#define WUSB_DN_MASAVAILCHANGED 0x04 ++#define WUSB_DN_REMOTEWAKEUP 0x05 ++#define WUSB_DN_SLEEP 0x06 ++#define WUSB_DN_ALIVE 0x07 ++#define WUSB_DN_MAX 0x07 ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ ++typedef struct wusb_hndshk_data { ++ uByte bMessageNumber; ++ uByte bStatus; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte CDID[16]; ++ uByte Nonce[16]; ++ uByte MIC[8]; ++} UPACKED wusb_hndshk_data_t; ++#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 ++ ++/* WUSB Connection Context */ ++typedef struct wusb_conn_context { ++ uByte CHID [16]; ++ uByte CDID [16]; ++ uByte CK [16]; ++} UPACKED wusb_conn_context_t; ++ ++/* WUSB Security Descriptor */ ++typedef struct wusb_security_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumEncryptionTypes; ++} UPACKED wusb_security_desc_t; ++ ++/* WUSB Encryption Type Descriptor */ ++typedef struct wusb_encrypt_type_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ ++ uByte bEncryptionType; ++#define WUETD_UNSECURE 0 ++#define WUETD_WIRED 1 ++#define WUETD_CCM_1 2 ++#define WUETD_RSA_1 3 ++ ++ uByte bEncryptionValue; ++ uByte bAuthKeyIndex; ++} UPACKED wusb_encrypt_type_desc_t; ++ ++/* WUSB Key Descriptor */ ++typedef struct wusb_key_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte KeyData[1]; /* variable length */ ++} UPACKED wusb_key_desc_t; ++ ++/* WUSB BOS Descriptor (Binary device Object Store) */ ++typedef struct wusb_bos_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumDeviceCaps; ++} UPACKED wusb_bos_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 ++typedef struct usb_dev_cap_20_ext_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_20_EXT_LPM 0x02 ++ uDWord bmAttributes; ++} UPACKED usb_dev_cap_20_ext_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_SS_USB 0x03 ++typedef struct usb_dev_cap_ss_usb { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_DC_SS_USB_LTM_CAPABLE 0x02 ++ uByte bmAttributes; ++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01 ++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02 ++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04 ++#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08 ++ uWord wSpeedsSupported; ++ uByte bFunctionalitySupport; ++ uByte bU1DevExitLat; ++ uWord wU2DevExitLat; ++} UPACKED usb_dev_cap_ss_usb_t; ++ ++#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04 ++typedef struct usb_dev_cap_container_id { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bReserved; ++ uByte containerID[16]; ++} UPACKED usb_dev_cap_container_id_t; ++ ++/* Device Capability Type Codes */ ++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte caps[1]; /* Variable length */ ++} UPACKED wusb_dev_cap_desc_t; ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_uwb_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bmAttributes; ++ uWord wPHYRates; /* Bitmap */ ++ uByte bmTFITXPowerInfo; ++ uByte bmFFITXPowerInfo; ++ uWord bmBandGroup; ++ uByte bReserved; ++} UPACKED wusb_dev_cap_uwb_desc_t; ++ ++/* Wireless USB Endpoint Companion Descriptor */ ++typedef struct wusb_endpoint_companion_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++ uByte bMaxSequence; ++ uWord wMaxStreamDelay; ++ uWord wOverTheAirPacketSize; ++ uByte bOverTheAirInterval; ++ uByte bmCompAttributes; ++} UPACKED wusb_endpoint_companion_desc_t; ++ ++/* Wireless USB Numeric Association M1 Data Structure */ ++typedef struct wusb_m1_data { ++ uByte version; ++ uWord langId; ++ uByte deviceFriendlyNameLength; ++ uByte sha_256_m3[32]; ++ uByte deviceFriendlyName[256]; ++} UPACKED wusb_m1_data_t; ++ ++typedef struct wusb_m2_data { ++ uByte version; ++ uWord langId; ++ uByte hostFriendlyNameLength; ++ uByte pkh[384]; ++ uByte hostFriendlyName[256]; ++} UPACKED wusb_m2_data_t; ++ ++typedef struct wusb_m3_data { ++ uByte pkd[384]; ++ uByte nd; ++} UPACKED wusb_m3_data_t; ++ ++typedef struct wusb_m4_data { ++ uDWord _attributeTypeIdAndLength_1; ++ uWord associationTypeId; ++ ++ uDWord _attributeTypeIdAndLength_2; ++ uWord associationSubTypeId; ++ ++ uDWord _attributeTypeIdAndLength_3; ++ uDWord length; ++ ++ uDWord _attributeTypeIdAndLength_4; ++ uDWord associationStatus; ++ ++ uDWord _attributeTypeIdAndLength_5; ++ uByte chid[16]; ++ ++ uDWord _attributeTypeIdAndLength_6; ++ uByte cdid[16]; ++ ++ uDWord _attributeTypeIdAndLength_7; ++ uByte bandGroups[2]; ++} UPACKED wusb_m4_data_t; ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _USB_H_ */ +diff --git a/drivers/usb/host/dwc_otg/Makefile b/drivers/usb/host/dwc_otg/Makefile +new file mode 100644 +index 000000000000..e7bdd12015fe +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -0,0 +1,82 @@ ++# ++# Makefile for DWC_otg Highspeed USB controller driver ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++# Use the BUS_INTERFACE variable to compile the software for either ++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus. ++ifeq ($(BUS_INTERFACE),) ++# BUS_INTERFACE = -DPCI_INTERFACE ++# BUS_INTERFACE = -DLM_INTERFACE ++ BUS_INTERFACE = -DPLATFORM_INTERFACE ++endif ++ ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs ++ ++# Use one of the following flags to compile the software in host-only or ++# device-only mode. ++#ccflags-y += -DDWC_HOST_ONLY ++#ccflags-y += -DDWC_DEVICE_ONLY ++ ++ccflags-y += -Dlinux -DDWC_HS_ELECT_TST ++#ccflags-y += -DDWC_EN_ISOC ++ccflags-y += -I$(obj)/../dwc_common_port ++#ccflags-y += -I$(PORTLIB) ++ccflags-y += -DDWC_LINUX ++ccflags-y += $(CFI) ++ccflags-y += $(BUS_INTERFACE) ++#ccflags-y += -DDWC_DEV_SRPCAP ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o ++ ++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o ++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o ++dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o ++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o ++dwc_otg-objs += dwc_otg_adp.o ++dwc_otg-objs += dwc_otg_fiq_fsm.o ++dwc_otg-objs += dwc_otg_fiq_stub.o ++ifneq ($(CFI),) ++dwc_otg-objs += dwc_otg_cfi.o ++endif ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++ccflags-y += $(CPPFLAGS) ++endif ++ ++else ++ ++PWD := $(shell pwd) ++PORTLIB := $(PWD)/../dwc_common_port ++ ++# Command paths ++CTAGS := $(CTAGS) ++DOXYGEN := $(DOXYGEN) ++ ++default: portlib ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++install: default ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install ++ $(MAKE) -C$(KDIR) M=$(PWD) modules_install ++ ++portlib: ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ cp $(PORTLIB)/Module.symvers $(PWD)/ ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers ++ ++endif +diff --git a/drivers/usb/host/dwc_otg/doc/doxygen.cfg b/drivers/usb/host/dwc_otg/doc/doxygen.cfg +new file mode 100644 +index 000000000000..712b057ef7c2 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg +@@ -0,0 +1,224 @@ ++# Doxyfile 1.3.9.1 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver" ++PROJECT_NUMBER = v3.00a ++OUTPUT_DIRECTORY = ./doc/ ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = NO ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++INHERIT_DOCS = YES ++DISTRIBUTE_GROUP_DOC = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++SUBGROUPING = YES ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = YES ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = YES ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = NO ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = YES ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.h \ ++ ./linux/*.c \ ++ ./linux/*.h ++RECURSIVE = NO ++EXCLUDE = ./test/ \ ++ ./dwc_otg/.AppleDouble/ ++EXCLUDE_SYMLINKS = YES ++EXCLUDE_PATTERNS = *.mod.* ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = YES ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = NO ++REFERENCES_RELATION = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = YES ++EXPAND_ONLY_PREDEF = YES ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEVICE_ATTR DWC_EN_ISOC ++EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC ++SKIP_FUNCTION_MACROS = NO ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = YES ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +diff --git a/drivers/usb/host/dwc_otg/dummy_audio.c b/drivers/usb/host/dwc_otg/dummy_audio.c +new file mode 100644 +index 000000000000..f827102fa644 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dummy_audio.c +@@ -0,0 +1,1574 @@ ++/* ++ * zero.c -- Gadget Zero, for USB development ++ * ++ * Copyright (C) 2003-2004 David Brownell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * Gadget Zero only needs two bulk endpoints, and is an example of how you ++ * can write a hardware-agnostic gadget driver running inside a USB device. ++ * ++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't ++ * affect most of the driver. ++ * ++ * Use it with the Linux host/master side "usbtest" driver to get a basic ++ * functional test of your device-side usb stack, or with "usb-skeleton". ++ * ++ * It supports two similar configurations. One sinks whatever the usb host ++ * writes, and in return sources zeroes. The other loops whatever the host ++ * writes back, so the host can read it. Module options include: ++ * ++ * buflen=N default N=4096, buffer size used ++ * qlen=N default N=32, how many buffers in the loopback queue ++ * loopdefault default false, list loopback config first ++ * ++ * Many drivers will only have one configuration, letting them be much ++ * simpler if they also don't support high speed operation (like this ++ * driver does). ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include ++#else ++# include ++#endif ++ ++#include ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++ ++/** ++ * usb_gadget_get_string - fill out a string descriptor ++ * @table: of c strings encoded using UTF-8 ++ * @id: string id, from low byte of wValue in get string descriptor ++ * @buf: at least 256 bytes ++ * ++ * Finds the UTF-8 string matching the ID, and converts it into a ++ * string descriptor in utf16-le. ++ * Returns length of descriptor (always even) or negative errno ++ * ++ * If your driver needs stings in multiple languages, you'll probably ++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, ++ * using this routine after choosing which set of UTF-8 strings to use. ++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with ++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 ++ * characters (which are also widely used in C strings). ++ */ ++int ++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) ++{ ++ struct usb_string *s; ++ int len; ++ ++ /* descriptor 0 has the language id */ ++ if (id == 0) { ++ buf [0] = 4; ++ buf [1] = USB_DT_STRING; ++ buf [2] = (u8) table->language; ++ buf [3] = (u8) (table->language >> 8); ++ return 4; ++ } ++ for (s = table->strings; s && s->s; s++) ++ if (s->id == id) ++ break; ++ ++ /* unrecognized: stall. */ ++ if (!s || !s->s) ++ return -EINVAL; ++ ++ /* string descriptors have length, tag, then UTF16-LE text */ ++ len = min ((size_t) 126, strlen (s->s)); ++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ ++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); ++ if (len < 0) ++ return -EINVAL; ++ buf [0] = (len + 1) * 2; ++ buf [1] = USB_DT_STRING; ++ return buf [0]; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/** ++ * usb_descriptor_fillbuf - fill buffer with descriptors ++ * @buf: Buffer to be filled ++ * @buflen: Size of buf ++ * @src: Array of descriptor pointers, terminated by null pointer. ++ * ++ * Copies descriptors into the buffer, returning the length or a ++ * negative error code if they can't all be copied. Useful when ++ * assembling descriptors for an associated set of interfaces used ++ * as part of configuring a composite device; or in other cases where ++ * sets of descriptors need to be marshaled. ++ */ ++int ++usb_descriptor_fillbuf(void *buf, unsigned buflen, ++ const struct usb_descriptor_header **src) ++{ ++ u8 *dest = buf; ++ ++ if (!src) ++ return -EINVAL; ++ ++ /* fill buffer from src[] until null descriptor ptr */ ++ for (; 0 != *src; src++) { ++ unsigned len = (*src)->bLength; ++ ++ if (len > buflen) ++ return -EINVAL; ++ memcpy(dest, *src, len); ++ buflen -= len; ++ dest += len; ++ } ++ return dest - (u8 *)buf; ++} ++ ++ ++/** ++ * usb_gadget_config_buf - builts a complete configuration descriptor ++ * @config: Header for the descriptor, including characteristics such ++ * as power requirements and number of interfaces. ++ * @desc: Null-terminated vector of pointers to the descriptors (interface, ++ * endpoint, etc) defining all functions in this device configuration. ++ * @buf: Buffer for the resulting configuration descriptor. ++ * @length: Length of buffer. If this is not big enough to hold the ++ * entire configuration descriptor, an error code will be returned. ++ * ++ * This copies descriptors into the response buffer, building a descriptor ++ * for that configuration. It returns the buffer length or a negative ++ * status code. The config.wTotalLength field is set to match the length ++ * of the result, but other descriptor fields (including power usage and ++ * interface count) must be set by the caller. ++ * ++ * Gadget drivers could use this when constructing a config descriptor ++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the ++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. ++ */ ++int usb_gadget_config_buf( ++ const struct usb_config_descriptor *config, ++ void *buf, ++ unsigned length, ++ const struct usb_descriptor_header **desc ++) ++{ ++ struct usb_config_descriptor *cp = buf; ++ int len; ++ ++ /* config descriptor first */ ++ if (length < USB_DT_CONFIG_SIZE || !desc) ++ return -EINVAL; ++ *cp = *config; ++ ++ /* then interface/endpoint/class/vendor/... */ ++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, ++ length - USB_DT_CONFIG_SIZE, desc); ++ if (len < 0) ++ return len; ++ len += USB_DT_CONFIG_SIZE; ++ if (len > 0xffff) ++ return -EINVAL; ++ ++ /* patch up the config descriptor */ ++ cp->bLength = USB_DT_CONFIG_SIZE; ++ cp->bDescriptorType = USB_DT_CONFIG; ++ cp->wTotalLength = cpu_to_le16(len); ++ cp->bmAttributes |= USB_CONFIG_ATT_ONE; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++#define RBUF_LEN (1024*1024) ++static int rbuf_start; ++static int rbuf_len; ++static __u8 rbuf[RBUF_LEN]; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_VERSION "St Patrick's Day 2004" ++ ++static const char shortname [] = "zero"; ++static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; ++ ++static const char source_sink [] = "source and sink data"; ++static const char loopback [] = "loop input to output"; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * driver assumes self-powered hardware, and ++ * has no way for users to trigger remote wakeup. ++ * ++ * this version autoconfigures as much as possible, ++ * which is reasonable for most "bulk-only" drivers. ++ */ ++static const char *EP_IN_NAME; /* source */ ++static const char *EP_OUT_NAME; /* sink */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* big enough to hold our biggest descriptor */ ++#define USB_BUFSIZ 512 ++ ++struct zero_dev { ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ struct usb_request *req; /* for control responses */ ++ ++ /* when configured, we have one of two configs: ++ * - source data (in to host) and sink it (out from host) ++ * - or loop it back (out from host back in to host) ++ */ ++ u8 config; ++ struct usb_ep *in_ep, *out_ep; ++ ++ /* autoresume timer */ ++ struct timer_list resume; ++}; ++ ++#define xprintk(d,level,fmt,args...) \ ++ dev_printk(level , &(d)->gadget->dev , fmt , ## args) ++ ++#ifdef DEBUG ++#define DBG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static unsigned buflen = 4096; ++static unsigned qlen = 32; ++static unsigned pattern = 0; ++ ++module_param (buflen, uint, S_IRUGO|S_IWUSR); ++module_param (qlen, uint, S_IRUGO|S_IWUSR); ++module_param (pattern, uint, S_IRUGO|S_IWUSR); ++ ++/* ++ * if it's nonzero, autoresume says how many seconds to wait ++ * before trying to wake up the host after suspend. ++ */ ++static unsigned autoresume = 0; ++module_param (autoresume, uint, 0); ++ ++/* ++ * Normally the "loopback" configuration is second (index 1) so ++ * it's not the default. Here's where to change that order, to ++ * work better with hosts where config changes are problematic. ++ * Or controllers (like superh) that only support one config. ++ */ ++static int loopdefault = 0; ++ ++module_param (loopdefault, bool, S_IRUGO|S_IWUSR); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Thanks to NetChip Technologies for donating this product ID. ++ * ++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! ++ * Instead: allocate your own, using normal USB-IF procedures. ++ */ ++#ifndef CONFIG_USB_ZERO_HNPTEST ++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ ++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ ++#else ++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ ++#define DRIVER_PRODUCT_NUM 0xbadd ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) ++ * configuration descriptors are built on demand. ++ */ ++ ++/* ++#define STRING_MANUFACTURER 25 ++#define STRING_PRODUCT 42 ++#define STRING_SERIAL 101 ++*/ ++#define STRING_MANUFACTURER 1 ++#define STRING_PRODUCT 2 ++#define STRING_SERIAL 3 ++ ++#define STRING_SOURCE_SINK 250 ++#define STRING_LOOPBACK 251 ++ ++/* ++ * This device advertises two configurations; these numbers work ++ * on a pxa250 as well as more flexible hardware. ++ */ ++#define CONFIG_SOURCE_SINK 3 ++#define CONFIG_LOOPBACK 2 ++ ++/* ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), ++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 2, ++}; ++*/ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = __constant_cpu_to_le16 (0x0100), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ .bDeviceSubClass = 0, ++ .bDeviceProtocol = 0, ++ .bMaxPacketSize0 = 64, ++ .bcdDevice = __constant_cpu_to_le16 (0x0100), ++ .idVendor = __constant_cpu_to_le16 (0x0499), ++ .idProduct = __constant_cpu_to_le16 (0x3002), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++z_config = { ++ .bLength = sizeof z_config, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* compute wTotalLength on the fly */ ++ .bNumInterfaces = 2, ++ .bConfigurationValue = 1, ++ .iConfiguration = 0, ++ .bmAttributes = 0x40, ++ .bMaxPower = 0, /* self-powered */ ++}; ++ ++ ++static struct usb_otg_descriptor ++otg_descriptor = { ++ .bLength = sizeof otg_descriptor, ++ .bDescriptorType = USB_DT_OTG, ++ ++ .bmAttributes = USB_OTG_SRP, ++}; ++ ++/* one interface in each configuration */ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ ++/* ++ * usb 2.0 devices need to expose both high speed and full speed ++ * descriptors, unless they only run at full speed. ++ * ++ * that means alternate endpoint descriptors (bigger packets) ++ * and a "device qualifier" ... plus more construction options ++ * for the config descriptor. ++ */ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .bNumConfigurations = 2, ++}; ++ ++ ++struct usb_cs_as_general_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bTerminalLink; ++ __u8 bDelay; ++ __u16 wFormatTag; ++} __attribute__ ((packed)); ++ ++struct usb_cs_as_format_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bFormatType; ++ __u8 bNrChannels; ++ __u8 bSubframeSize; ++ __u8 bBitResolution; ++ __u8 bSamfreqType; ++ __u8 tLowerSamFreq[3]; ++ __u8 tUpperSamFreq[3]; ++} __attribute__ ((packed)); ++ ++static const struct usb_interface_descriptor ++z_audio_control_if_desc = { ++ .bLength = sizeof z_audio_control_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x1, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc2 = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 1, ++ .bNumEndpoints = 1, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_cs_as_general_descriptor ++z_audio_cs_as_if_desc = { ++ .bLength = 7, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 0x01, ++ .bTerminalLink = 0x01, ++ .bDelay = 0x0, ++ .wFormatTag = __constant_cpu_to_le16 (0x0001) ++}; ++ ++ ++static const struct usb_cs_as_format_descriptor ++z_audio_cs_as_format_desc = { ++ .bLength = 0xe, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 2, ++ .bFormatType = 1, ++ .bNrChannels = 1, ++ .bSubframeSize = 1, ++ .bBitResolution = 8, ++ .bSamfreqType = 0, ++ .tLowerSamFreq = {0x7e, 0x13, 0x00}, ++ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, ++}; ++ ++static const struct usb_endpoint_descriptor ++z_iso_ep = { ++ .bLength = 0x09, ++ .bDescriptorType = 0x05, ++ .bEndpointAddress = 0x04, ++ .bmAttributes = 0x09, ++ .wMaxPacketSize = 0x0038, ++ .bInterval = 0x01, ++ .bRefresh = 0x00, ++ .bSynchAddress = 0x00, ++}; ++ ++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++// 9 bytes ++static char z_ac_interface_header_desc[] = ++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; ++ ++// 12 bytes ++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, ++ 0x03, 0x00, 0x00, 0x00}; ++// 13 bytes ++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, ++ 0x02, 0x00, 0x02, 0x00, 0x00}; ++// 9 bytes ++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, ++ 0x00}; ++ ++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, ++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, ++ 0x00}; ++ ++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++ ++ ++static const struct usb_descriptor_header *z_function [] = { ++ (struct usb_descriptor_header *) &z_audio_control_if_desc, ++ (struct usb_descriptor_header *) &z_ac_interface_header_desc, ++ (struct usb_descriptor_header *) &z_0, ++ (struct usb_descriptor_header *) &z_1, ++ (struct usb_descriptor_header *) &z_2, ++ (struct usb_descriptor_header *) &z_audio_if_desc, ++ (struct usb_descriptor_header *) &z_audio_if_desc2, ++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, ++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, ++ (struct usb_descriptor_header *) &z_iso_ep, ++ (struct usb_descriptor_header *) &z_iso_ep2, ++ (struct usb_descriptor_header *) &za_0, ++ (struct usb_descriptor_header *) &za_1, ++ (struct usb_descriptor_header *) &za_2, ++ (struct usb_descriptor_header *) &za_3, ++ (struct usb_descriptor_header *) &za_4, ++ (struct usb_descriptor_header *) &za_5, ++ (struct usb_descriptor_header *) &za_6, ++ (struct usb_descriptor_header *) &za_7, ++ (struct usb_descriptor_header *) &za_8, ++ (struct usb_descriptor_header *) &za_9, ++ (struct usb_descriptor_header *) &za_10, ++ (struct usb_descriptor_header *) &za_11, ++ (struct usb_descriptor_header *) &za_12, ++ (struct usb_descriptor_header *) &za_13, ++ (struct usb_descriptor_header *) &za_14, ++ (struct usb_descriptor_header *) &za_15, ++ (struct usb_descriptor_header *) &za_16, ++ (struct usb_descriptor_header *) &za_17, ++ (struct usb_descriptor_header *) &za_18, ++ (struct usb_descriptor_header *) &za_19, ++ (struct usb_descriptor_header *) &za_20, ++ (struct usb_descriptor_header *) &za_21, ++ (struct usb_descriptor_header *) &za_22, ++ (struct usb_descriptor_header *) &za_23, ++ (struct usb_descriptor_header *) &za_24, ++ NULL, ++}; ++ ++/* maxpacket and other transfer characteristics vary by speed. */ ++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) ++ ++#else ++ ++/* if there's no high speed support, maxpacket doesn't change. */ ++#define ep_desc(g,hs,fs) fs ++ ++#endif /* !CONFIG_USB_GADGET_DUALSPEED */ ++ ++static char manufacturer [40]; ++//static char serial [40]; ++static char serial [] = "Ser 00 em"; ++ ++/* static strings, in UTF-8 */ ++static struct usb_string strings [] = { ++ { STRING_MANUFACTURER, manufacturer, }, ++ { STRING_PRODUCT, longname, }, ++ { STRING_SERIAL, serial, }, ++ { STRING_LOOPBACK, loopback, }, ++ { STRING_SOURCE_SINK, source_sink, }, ++ { } /* end of list */ ++}; ++ ++static struct usb_gadget_strings stringtab = { ++ .language = 0x0409, /* en-us */ ++ .strings = strings, ++}; ++ ++/* ++ * config descriptors are also handcrafted. these must agree with code ++ * that sets configurations, and with code managing interfaces and their ++ * altsettings. other complexity may come from: ++ * ++ * - high speed support, including "other speed config" rules ++ * - multiple configurations ++ * - interfaces with alternate settings ++ * - embedded class or vendor-specific descriptors ++ * ++ * this handles high speed, and has a second config that could as easily ++ * have been an alternate interface setting (on most hardware). ++ * ++ * NOTE: to demonstrate (and test) more USB capabilities, this driver ++ * should include an altsetting to test interrupt transfers, including ++ * high bandwidth modes at high speed. (Maybe work like Intel's test ++ * device?) ++ */ ++static int ++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) ++{ ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ function = z_function; ++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); ++ if (len < 0) ++ return len; ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++alloc_ep_req (struct usb_ep *ep, unsigned length) ++{ ++ struct usb_request *req; ++ ++ req = usb_ep_alloc_request (ep, GFP_ATOMIC); ++ if (req) { ++ req->length = length; ++ req->buf = usb_ep_alloc_buffer (ep, length, ++ &req->dma, GFP_ATOMIC); ++ if (!req->buf) { ++ usb_ep_free_request (ep, req); ++ req = NULL; ++ } ++ } ++ return req; ++} ++ ++static void free_ep_req (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->buf) ++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); ++ usb_ep_free_request (ep, req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* optionally require specific source/sink data patterns */ ++ ++static int ++check_read_data ( ++ struct zero_dev *dev, ++ struct usb_ep *ep, ++ struct usb_request *req ++) ++{ ++ unsigned i; ++ u8 *buf = req->buf; ++ ++ for (i = 0; i < req->actual; i++, buf++) { ++ switch (pattern) { ++ /* all-zeroes has no synchronization issues */ ++ case 0: ++ if (*buf == 0) ++ continue; ++ break; ++ /* mod63 stays in sync with short-terminated transfers, ++ * or otherwise when host and gadget agree on how large ++ * each usb transfer request should be. resync is done ++ * with set_interface or set_config. ++ */ ++ case 1: ++ if (*buf == (u8)(i % 63)) ++ continue; ++ break; ++ } ++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); ++ usb_ep_set_halt (ep); ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_reset_config (struct zero_dev *dev) ++{ ++ if (dev->config == 0) ++ return; ++ ++ DBG (dev, "reset config\n"); ++ ++ /* just disable endpoints, forcing completion of pending i/o. ++ * all our completion handlers free their requests in this case. ++ */ ++ if (dev->in_ep) { ++ usb_ep_disable (dev->in_ep); ++ dev->in_ep = NULL; ++ } ++ if (dev->out_ep) { ++ usb_ep_disable (dev->out_ep); ++ dev->out_ep = NULL; ++ } ++ dev->config = 0; ++ del_timer (&dev->resume); ++} ++ ++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) ++ ++static void ++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ struct zero_dev *dev = ep->driver_data; ++ int status = req->status; ++ int i, j; ++ ++ switch (status) { ++ ++ case 0: /* normal completion? */ ++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); ++ for (i=0, j=rbuf_start; iactual; i++) { ++ //printk ("%02x ", ((__u8*)req->buf)[i]); ++ rbuf[j] = ((__u8*)req->buf)[i]; ++ j++; ++ if (j >= RBUF_LEN) j=0; ++ } ++ rbuf_start = j; ++ //printk ("\n\n"); ++ ++ if (rbuf_len < RBUF_LEN) { ++ rbuf_len += req->actual; ++ if (rbuf_len > RBUF_LEN) { ++ rbuf_len = RBUF_LEN; ++ } ++ } ++ ++ break; ++ ++ /* this endpoint is normally active while we're configured */ ++ case -ECONNABORTED: /* hardware forced ep reset */ ++ case -ECONNRESET: /* request dequeued */ ++ case -ESHUTDOWN: /* disconnect from host */ ++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, ++ req->actual, req->length); ++ if (ep == dev->out_ep) ++ check_read_data (dev, ep, req); ++ free_ep_req (ep, req); ++ return; ++ ++ case -EOVERFLOW: /* buffer overrun on read means that ++ * we didn't provide a big enough ++ * buffer. ++ */ ++ default: ++#if 1 ++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, ++ status, req->actual, req->length); ++#endif ++ case -EREMOTEIO: /* short read */ ++ break; ++ } ++ ++ status = usb_ep_queue (ep, req, GFP_ATOMIC); ++ if (status) { ++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ++ ep->name, req->length, status); ++ usb_ep_set_halt (ep); ++ /* FIXME recover later ... somehow */ ++ } ++} ++ ++static struct usb_request * ++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) ++{ ++ struct usb_request *req; ++ int status; ++ ++ req = alloc_ep_req (ep, 512); ++ if (!req) ++ return NULL; ++ ++ req->complete = zero_isoc_complete; ++ ++ status = usb_ep_queue (ep, req, gfp_flags); ++ if (status) { ++ struct zero_dev *dev = ep->driver_data; ++ ++ ERROR (dev, "start %s --> %d\n", ep->name, status); ++ free_ep_req (ep, req); ++ req = NULL; ++ } ++ ++ return req; ++} ++ ++/* change our operational config. this code must agree with the code ++ * that returns config descriptors, and altsetting code. ++ * ++ * it's also responsible for power management interactions. some ++ * configurations might not work with our current power sources. ++ * ++ * note that some device controller hardware will constrain what this ++ * code can do, perhaps by disallowing more than one configuration or ++ * by limiting configuration choices (like the pxa2xx). ++ */ ++static int ++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) ++{ ++ int result = 0; ++ struct usb_gadget *gadget = dev->gadget; ++ const struct usb_endpoint_descriptor *d; ++ struct usb_ep *ep; ++ ++ if (number == dev->config) ++ return 0; ++ ++ zero_reset_config (dev); ++ ++ gadget_for_each_ep (ep, gadget) { ++ ++ if (strcmp (ep->name, "ep4") == 0) { ++ ++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 ++ result = usb_ep_enable (ep, d); ++ ++ if (result == 0) { ++ ep->driver_data = dev; ++ dev->in_ep = ep; ++ ++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { ++ ++ dev->in_ep = ep; ++ continue; ++ } ++ ++ usb_ep_disable (ep); ++ result = -EIO; ++ } ++ } ++ ++ } ++ ++ dev->config = number; ++ return result; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->status || req->actual != req->length) ++ DBG ((struct zero_dev *) ep->driver_data, ++ "setup complete --> %d, %d/%d\n", ++ req->status, req->actual, req->length); ++} ++ ++/* ++ * The setup() callback implements all the ep0 functionality that's ++ * not handled lower down, in hardware or the hardware driver (like ++ * device and endpoint feature flags, and their status). It's all ++ * housekeeping for the gadget function we're implementing. Most of ++ * the work is in config-specific setup. ++ */ ++static int ++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ struct usb_request *req = dev->req; ++ int value = -EOPNOTSUPP; ++ ++ /* usually this stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will reconfigure hardware. ++ */ ++ req->zero = 0; ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ ++ switch (ctrl->wValue >> 8) { ++ ++ case USB_DT_DEVICE: ++ value = min (ctrl->wLength, (u16) sizeof device_desc); ++ memcpy (req->buf, &device_desc, value); ++ break; ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ case USB_DT_DEVICE_QUALIFIER: ++ if (!gadget->is_dualspeed) ++ break; ++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); ++ memcpy (req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ if (!gadget->is_dualspeed) ++ break; ++ // FALLTHROUGH ++#endif /* CONFIG_USB_GADGET_DUALSPEED */ ++ case USB_DT_CONFIG: ++ value = config_buf (gadget, req->buf, ++ ctrl->wValue >> 8, ++ ctrl->wValue & 0xff); ++ if (value >= 0) ++ value = min (ctrl->wLength, (u16) value); ++ break; ++ ++ case USB_DT_STRING: ++ /* wIndex == language code. ++ * this driver only handles one language, you can ++ * add string tables for other languages, using ++ * any UTF-8 characters ++ */ ++ value = usb_gadget_get_string (&stringtab, ++ ctrl->wValue & 0xff, req->buf); ++ if (value >= 0) { ++ value = min (ctrl->wLength, (u16) value); ++ } ++ break; ++ } ++ break; ++ ++ /* currently two configs, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != 0) ++ goto unknown; ++ ++ spin_lock (&dev->lock); ++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != USB_DIR_IN) ++ goto unknown; ++ *(u8 *)req->buf = dev->config; ++ value = min (ctrl->wLength, (u16) 1); ++ break; ++ ++ /* until we add altsetting support, or other interfaces, ++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) ++ * and already killed pending endpoint I/O. ++ */ ++ case USB_REQ_SET_INTERFACE: ++ ++ if (ctrl->bRequestType != USB_RECIP_INTERFACE) ++ goto unknown; ++ spin_lock (&dev->lock); ++ if (dev->config) { ++ u8 config = dev->config; ++ ++ /* resets interface configuration, forgets about ++ * previous transaction state (queued bufs, etc) ++ * and re-inits endpoint state (toggle etc) ++ * no response queued, just zero status == success. ++ * if we had more than one interface we couldn't ++ * use this "reset the config" shortcut. ++ */ ++ zero_reset_config (dev); ++ zero_set_config (dev, config, GFP_ATOMIC); ++ value = 0; ++ } ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { ++ value = ctrl->wLength; ++ break; ++ } ++ else { ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) ++ goto unknown; ++ if (!dev->config) ++ break; ++ if (ctrl->wIndex != 0) { ++ value = -EDOM; ++ break; ++ } ++ *(u8 *)req->buf = 0; ++ value = min (ctrl->wLength, (u16) 1); ++ } ++ break; ++ ++ /* ++ * These are the same vendor-specific requests supported by ++ * Intel's USB 2.0 compliance test devices. We exceed that ++ * device spec by allowing multiple-packet requests. ++ */ ++ case 0x5b: /* control WRITE test -- fill the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* just read that many bytes into the buffer */ ++ if (ctrl->wLength > USB_BUFSIZ) ++ break; ++ value = ctrl->wLength; ++ break; ++ case 0x5c: /* control READ test -- return the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* expect those bytes are still in the buffer; send back */ ++ if (ctrl->wLength > USB_BUFSIZ ++ || ctrl->wLength != req->length) ++ break; ++ value = ctrl->wLength; ++ break; ++ ++ case 0x01: // SET_CUR ++ case 0x02: ++ case 0x03: ++ case 0x04: ++ case 0x05: ++ value = ctrl->wLength; ++ break; ++ case 0x81: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xe3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x81; ++ //((u8*)req->buf)[1] = 0x81; ++ value = ctrl->wLength; ++ break; ++ case 0x82: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xc3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x82; ++ //((u8*)req->buf)[1] = 0x82; ++ value = ctrl->wLength; ++ break; ++ case 0x83: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x00; ++ break; ++ case 0x0300: ++ ((u8*)req->buf)[0] = 0x60; ++ break; ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x18; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x83; ++ //((u8*)req->buf)[1] = 0x83; ++ value = ctrl->wLength; ++ break; ++ case 0x84: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x01; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x08; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x84; ++ //((u8*)req->buf)[1] = 0x84; ++ value = ctrl->wLength; ++ break; ++ case 0x85: ++ ((u8*)req->buf)[0] = 0x85; ++ ((u8*)req->buf)[1] = 0x85; ++ value = ctrl->wLength; ++ break; ++ ++ ++ default: ++unknown: ++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ ctrl->wValue, ctrl->wIndex, ctrl->wLength); ++ } ++ ++ /* respond with data transfer before status phase? */ ++ if (value >= 0) { ++ req->length = value; ++ req->zero = value < ctrl->wLength ++ && (value % gadget->ep0->maxpacket) == 0; ++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); ++ if (value < 0) { ++ DBG (dev, "ep_queue < 0 --> %d\n", value); ++ req->status = 0; ++ zero_setup_complete (gadget->ep0, req); ++ } ++ } ++ ++ /* device either stalls (value < 0) or reports success */ ++ return value; ++} ++ ++static void ++zero_disconnect (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ unsigned long flags; ++ ++ spin_lock_irqsave (&dev->lock, flags); ++ zero_reset_config (dev); ++ ++ /* a more significant application might have some non-usb ++ * activities to quiesce here, saving resources like power ++ * or pushing the notification up a network stack. ++ */ ++ spin_unlock_irqrestore (&dev->lock, flags); ++ ++ /* next we may get setup() calls to enumerate new connections; ++ * or an unbind() during shutdown (including removing module). ++ */ ++} ++ ++static void ++zero_autoresume (unsigned long _dev) ++{ ++ struct zero_dev *dev = (struct zero_dev *) _dev; ++ int status; ++ ++ /* normally the host would be woken up for something ++ * more significant than just a timer firing... ++ */ ++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { ++ status = usb_gadget_wakeup (dev->gadget); ++ DBG (dev, "wakeup --> %d\n", status); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_unbind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "unbind\n"); ++ ++ /* we've already been disconnected ... no i/o is active */ ++ if (dev->req) ++ free_ep_req (gadget->ep0, dev->req); ++ del_timer_sync (&dev->resume); ++ kfree (dev); ++ set_gadget_data (gadget, NULL); ++} ++ ++static int ++zero_bind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev; ++ //struct usb_ep *ep; ++ ++ printk("binding\n"); ++ /* ++ * DRIVER POLICY CHOICE: you may want to do this differently. ++ * One thing to avoid is reusing a bcdDevice revision code ++ * with different host-visible configurations or behavior ++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc ++ */ ++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); ++ ++ ++ /* ok, we made sense of the hardware ... */ ++ dev = kzalloc (sizeof *dev, SLAB_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ spin_lock_init (&dev->lock); ++ dev->gadget = gadget; ++ set_gadget_data (gadget, dev); ++ ++ /* preallocate control response and buffer */ ++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); ++ if (!dev->req) ++ goto enomem; ++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, ++ &dev->req->dma, GFP_KERNEL); ++ if (!dev->req->buf) ++ goto enomem; ++ ++ dev->req->complete = zero_setup_complete; ++ ++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; ++ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ /* assume ep0 uses the same value for both speeds ... */ ++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; ++ ++ /* and that all endpoints are dual-speed */ ++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; ++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; ++#endif ++ ++ usb_gadget_set_selfpowered (gadget); ++ ++ init_timer (&dev->resume); ++ dev->resume.function = zero_autoresume; ++ dev->resume.data = (unsigned long) dev; ++ ++ gadget->ep0->driver_data = dev; ++ ++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); ++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, ++ EP_OUT_NAME, EP_IN_NAME); ++ ++ snprintf (manufacturer, sizeof manufacturer, ++ UTS_SYSNAME " " UTS_RELEASE " with %s", ++ gadget->name); ++ ++ return 0; ++ ++enomem: ++ zero_unbind (gadget); ++ return -ENOMEM; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_suspend (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ if (gadget->speed == USB_SPEED_UNKNOWN) ++ return; ++ ++ if (autoresume) { ++ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); ++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); ++ } else ++ DBG (dev, "suspend\n"); ++} ++ ++static void ++zero_resume (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "resume\n"); ++ del_timer (&dev->resume); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver zero_driver = { ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ .speed = USB_SPEED_HIGH, ++#else ++ .speed = USB_SPEED_FULL, ++#endif ++ .function = (char *) longname, ++ .bind = zero_bind, ++ .unbind = zero_unbind, ++ ++ .setup = zero_setup, ++ .disconnect = zero_disconnect, ++ ++ .suspend = zero_suspend, ++ .resume = zero_resume, ++ ++ .driver = { ++ .name = (char *) shortname, ++ // .shutdown = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++MODULE_AUTHOR ("David Brownell"); ++MODULE_LICENSE ("Dual BSD/GPL"); ++ ++static struct proc_dir_entry *pdir, *pfile; ++ ++static int isoc_read_data (char *page, char **start, ++ off_t off, int count, ++ int *eof, void *data) ++{ ++ int i; ++ static int c = 0; ++ static int done = 0; ++ static int s = 0; ++ ++/* ++ printk ("\ncount: %d\n", count); ++ printk ("rbuf_start: %d\n", rbuf_start); ++ printk ("rbuf_len: %d\n", rbuf_len); ++ printk ("off: %d\n", off); ++ printk ("start: %p\n\n", *start); ++*/ ++ if (done) { ++ c = 0; ++ done = 0; ++ *eof = 1; ++ return 0; ++ } ++ ++ if (c == 0) { ++ if (rbuf_len == RBUF_LEN) ++ s = rbuf_start; ++ else s = 0; ++ } ++ ++ for (i=0; i= rbuf_len) { ++ *eof = 1; ++ done = 1; ++ } ++ ++ ++ return i; ++} ++ ++static int __init init (void) ++{ ++ ++ int retval = 0; ++ ++ pdir = proc_mkdir("isoc_test", NULL); ++ if(pdir == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating dir\n"); ++ goto done; ++ } ++ pdir->owner = THIS_MODULE; ++ ++ pfile = create_proc_read_entry("isoc_data", ++ 0444, pdir, ++ isoc_read_data, ++ NULL); ++ if (pfile == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating file\n"); ++ goto no_file; ++ } ++ pfile->owner = THIS_MODULE; ++ ++ return usb_gadget_register_driver (&zero_driver); ++ ++ no_file: ++ remove_proc_entry("isoc_data", NULL); ++ done: ++ return retval; ++} ++module_init (init); ++ ++static void __exit cleanup (void) ++{ ++ ++ usb_gadget_unregister_driver (&zero_driver); ++ ++ remove_proc_entry("isoc_data", pdir); ++ remove_proc_entry("isoc_test", NULL); ++} ++module_exit (cleanup); +diff --git a/drivers/usb/host/dwc_otg/dwc_cfi_common.h b/drivers/usb/host/dwc_otg/dwc_cfi_common.h +new file mode 100644 +index 000000000000..7770e201ad3b +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h +@@ -0,0 +1,142 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CFI_COMMON_H__) ++#define __DWC_CFI_COMMON_H__ ++ ++//#include ++ ++/** ++ * @file ++ * ++ * This file contains the CFI specific common constants, interfaces ++ * (functions and macros) and structures for Linux. No PCD specific ++ * data structure or definition is to be included in this file. ++ * ++ */ ++ ++/** This is a request for all Core Features */ ++#define VEN_CORE_GET_FEATURES 0xB1 ++ ++/** This is a request to get the value of a specific Core Feature */ ++#define VEN_CORE_GET_FEATURE 0xB2 ++ ++/** This command allows the host to set the value of a specific Core Feature */ ++#define VEN_CORE_SET_FEATURE 0xB3 ++ ++/** This command allows the host to set the default values of ++ * either all or any specific Core Feature ++ */ ++#define VEN_CORE_RESET_FEATURES 0xB4 ++ ++/** This command forces the PCD to write the deferred values of a Core Features */ ++#define VEN_CORE_ACTIVATE_FEATURES 0xB5 ++ ++/** This request reads a DWORD value from a register at the specified offset */ ++#define VEN_CORE_READ_REGISTER 0xB6 ++ ++/** This request writes a DWORD value into a register at the specified offset */ ++#define VEN_CORE_WRITE_REGISTER 0xB7 ++ ++/** This structure is the header of the Core Features dataset returned to ++ * the Host ++ */ ++struct cfi_all_features_header { ++/** The features header structure length is */ ++#define CFI_ALL_FEATURES_HDR_LEN 8 ++ /** ++ * The total length of the features dataset returned to the Host ++ */ ++ uint16_t wTotalLen; ++ ++ /** ++ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). ++ * This field identifies the version of the CFI Specification with which ++ * the device is compliant. ++ */ ++ uint16_t wVersion; ++ ++ /** The ID of the Core */ ++ uint16_t wCoreID; ++#define CFI_CORE_ID_UDC 1 ++#define CFI_CORE_ID_OTG 2 ++#define CFI_CORE_ID_WUDEV 3 ++ ++ /** Number of features returned by VEN_CORE_GET_FEATURES request */ ++ uint16_t wNumFeatures; ++} UPACKED; ++ ++typedef struct cfi_all_features_header cfi_all_features_header_t; ++ ++/** This structure is a header of the Core Feature descriptor dataset returned to ++ * the Host after the VEN_CORE_GET_FEATURES request ++ */ ++struct cfi_feature_desc_header { ++#define CFI_FEATURE_DESC_HDR_LEN 8 ++ ++ /** The feature ID */ ++ uint16_t wFeatureID; ++ ++ /** Length of this feature descriptor in bytes - including the ++ * length of the feature name string ++ */ ++ uint16_t wLength; ++ ++ /** The data length of this feature in bytes */ ++ uint16_t wDataLength; ++ ++ /** ++ * Attributes of this features ++ * D0: Access rights ++ * 0 - Read/Write ++ * 1 - Read only ++ */ ++ uint8_t bmAttributes; ++#define CFI_FEATURE_ATTR_RO 1 ++#define CFI_FEATURE_ATTR_RW 0 ++ ++ /** Length of the feature name in bytes */ ++ uint8_t bNameLen; ++ ++ /** The feature name buffer */ ++ //uint8_t *name; ++} UPACKED; ++ ++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; ++ ++/** ++ * This structure describes a NULL terminated string referenced by its id field. ++ * It is very similar to usb_string structure but has the id field type set to 16-bit. ++ */ ++struct cfi_string { ++ uint16_t id; ++ const uint8_t *s; ++}; ++typedef struct cfi_string cfi_string_t; ++ ++#endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_adp.c b/drivers/usb/host/dwc_otg/dwc_otg_adp.c +new file mode 100644 +index 000000000000..ce0618dd3f4a +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c +@@ -0,0 +1,854 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_adp.h" ++ ++/** @file ++ * ++ * This file contains the most of the Attach Detect Protocol implementation for ++ * the driver to support OTG Rev2.0. ++ * ++ */ ++ ++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = value; ++ adpctl.b.ar = 0x2; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++} ++ ++/** ++ * Function is called to read ADP registers ++ */ ++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = 0; ++ adpctl.b.ar = 0x1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to read ADPCTL register and filter Write-clear bits ++ */ ++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 0; ++ adpctl.b.adp_prb_int = 0; ++ adpctl.b.adp_tmout_int = 0; ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to write ADP registers ++ */ ++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr, ++ uint32_t set) ++{ ++ dwc_otg_adp_write_reg(core_if, ++ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set); ++} ++ ++static void adp_sense_timeout(void *ptr) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ core_if->adp.sense_timer_started = 0; ++ DWC_PRINTF("ADP SENSE TIMEOUT\n"); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_sense_stop(core_if); ++ dwc_otg_adp_probe_start(core_if); ++ } ++} ++ ++/** ++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s. ++ */ ++static void adp_vbuson_timeout(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__); ++ if (core_if) { ++ core_if->adp.vbuson_timer_started = 0; ++ /* Turn off vbus */ ++ hprt0.b.prtpwr = 1; ++ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0); ++ gpwrdn.d32 = 0; ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ /* Enable Wakeup Logic */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ /* Suspend the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Switch on VDD */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ } else { ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_host_registers(core_if); ++ } ++ ++} ++ ++/** ++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is ++ * not asserted within 1.1 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.vbuson_timer_started = 1; ++ if (core_if->adp.vbuson_timer) ++ { ++ DWC_PRINTF("SCHEDULING VBUSON TIMER\n"); ++ /* 1.1 secs + 60ms necessary for cil_hcd_start*/ ++ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160); ++ } else { ++ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer); ++ } ++} ++ ++#if 0 ++/** ++ * Masks all DWC OTG core interrupts ++ * ++ */ ++static void mask_all_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ++ /* Mask Host Interrupts */ ++ ++ /* Clear and disable HCINTs */ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0); ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF); ++ ++ } ++ ++ /* Clear and disable HAINT */ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF); ++ ++ /* Mask Device Interrupts */ ++ if (!core_if->multiproc_int_enable) { ++ /* Clear and disable IN Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable OUT Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable DAINT */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint, ++ 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0); ++ } else { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ 0); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint, ++ 0xFFFFFFFF); ++ ++ } ++ ++ /* Disable interrupts */ ++ ahbcfg.b.glblintrmsk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF); ++} ++ ++/** ++ * Unmask Port Connection Detected interrupt ++ * ++ */ ++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++} ++#endif ++ ++/** ++ * Starts the ADP Probing ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl = {.d32 = 0}; ++ gpwrdn_data_t gpwrdn; ++#if 0 ++ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1, ++ .b.adp_sns_int = 1, b.adp_tmout_int}; ++#endif ++ dwc_otg_disable_global_interrupts(core_if); ++ DWC_PRINTF("ADP Probe Start\n"); ++ core_if->adp.probe_enabled = 1; ++ ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.d32 = 0; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* In Host mode unmask SRP detected interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.sts_chngint_msk = 1; ++ if (!gpwrdn.b.idsts) { ++ gpwrdn.b.srp_det_msk = 1; ++ } ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ adpctl.b.adp_tmout_int_msk = 1; ++ adpctl.b.adp_prb_int_msk = 1; ++ adpctl.b.prb_dschg = 1; ++ adpctl.b.prb_delta = 1; ++ adpctl.b.prb_per = 1; ++ adpctl.b.adpen = 1; ++ adpctl.b.enaprb = 1; ++ ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("ADP Probe Finish\n"); ++ return 0; ++} ++ ++/** ++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted ++ * within 3 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.sense_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ ); ++} ++ ++/** ++ * Starts the ADP Sense ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ DWC_PRINTF("ADP Sense Start\n"); ++ ++ /* Unmask ADP sense interrupt and mask all other from the core */ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adp_sns_int_msk = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ dwc_otg_disable_global_interrupts(core_if); // vahrama ++ ++ /* Set ADP reset bit*/ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.b.adpres = 0; ++ adpctl.b.adpen = 1; ++ adpctl.b.enasns = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Probing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl; ++ DWC_PRINTF("Stop ADP probe\n"); ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.probe_counter = 0; ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ ++ adpctl.b.adpen = 0; ++ adpctl.b.adp_prb_int = 1; ++ adpctl.b.adp_tmout_int = 1; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Sensing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ core_if->adp.sense_enabled = 0; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.enasns = 0; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Called to turn on the VBUS after initial ADP probe in host mode. ++ * If port power was already enabled in cil_hcd_start function then ++ * only schedule a timer. ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr); ++ ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ ++ dwc_otg_adp_vbuson_timer_start(core_if); ++} ++ ++/** ++ * Called right after driver is loaded ++ * to perform initial actions for ADP ++ * ++ * @param core_if the pointer to core_if structure. ++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN ++ */ ++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host) ++{ ++ gpwrdn_data_t gpwrdn; ++ ++ DWC_PRINTF("ADP Initial Start\n"); ++ core_if->adp.adp_started = 1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ dwc_otg_disable_global_interrupts(core_if); ++ if (is_host) { ++ DWC_PRINTF("HOST MODE\n"); ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ /* Initialize first ADP probe to obtain Ramp Time value */ ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_PRINTF("DEVICE MODE\n"); ++ if (gotgctl.b.bsesvld == 0) { ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ DWC_PRINTF("VBUS is not valid - start ADP probe\n"); ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("VBUS is valid - initialize core as a Device\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_dev_registers(core_if); ++ } ++ } ++} ++ ++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.adp_started = 0; ++ core_if->adp.initial_probe = 0; ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.sense_enabled = 0; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ core_if->adp.attached = DWC_OTG_ADP_UNKOWN; ++ /* Initialize timers */ ++ core_if->adp.sense_timer = ++ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if); ++ core_if->adp.vbuson_timer = ++ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if); ++ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer) ++ { ++ DWC_ERROR("Could not allocate memory for ADP timers\n"); ++ } ++} ++ ++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ DWC_TIMER_FREE(core_if->adp.sense_timer); ++ DWC_TIMER_FREE(core_if->adp.vbuson_timer); ++} ++ ++///////////////////////////////////////////////////////////////////// ++////////////// ADP Interrupt Handlers /////////////////////////////// ++///////////////////////////////////////////////////////////////////// ++/** ++ * This function sets Ramp Timer values ++ */ ++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if (core_if->adp.probe_timer_values[0] == -1) { ++ core_if->adp.probe_timer_values[0] = val; ++ core_if->adp.probe_timer_values[1] = -1; ++ return 1; ++ } else { ++ core_if->adp.probe_timer_values[1] = ++ core_if->adp.probe_timer_values[0]; ++ core_if->adp.probe_timer_values[0] = val; ++ return 0; ++ } ++} ++ ++/** ++ * This function compares Ramp Timer values ++ */ ++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t diff; ++ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1]) ++ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1]; ++ else ++ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0]; ++ if(diff < 2) { ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn, temp; ++ adpctl.d32 = val; ++ ++ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->adp.probe_counter++; ++ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (adpctl.b.rtim == 0 && !temp.b.idsts){ ++ DWC_PRINTF("RTIM value is 0\n"); ++ goto exit; ++ } ++ if (set_timer_value(core_if, adpctl.b.rtim) && ++ core_if->adp.initial_probe) { ++ core_if->adp.initial_probe = 0; ++ dwc_otg_adp_probe_stop(core_if); ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* ++ * Turn on VBUS after initial ADP probe. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_enable_global_interrupts(core_if); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_start(core_if); ++ dwc_otg_adp_turnon_vbus(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_enable_global_interrupts(core_if); ++ dwc_otg_initiate_srp(core_if); ++ } ++ } else if (core_if->adp.probe_counter > 2){ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (compare_timer_values(core_if)) { ++ DWC_PRINTF("Difference in timer values !!! \n"); ++// core_if->adp.attached = DWC_OTG_ADP_ATTACHED; ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* Disable Interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (!gotgctl.b.bsesvld) { ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ } ++ if (core_if->power_down == 2) { ++ if (gpwrdn.b.bsessvld) { ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ } ++exit: ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_prb_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function hadles ADP Sense Interrupt ++ */ ++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ /* Stop ADP Sense timer */ ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ ++ /* Restart ADP Sense timer */ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ adpctl.d32 = val; ++ set_timer_value(core_if, adpctl.b.rtim); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * ADP Interrupt handler. ++ * ++ */ ++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ adpctl_data_t adpctl = {.d32 = 0}; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32); ++ ++ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) { ++ DWC_PRINTF("ADP Sense interrupt\n"); ++ retval |= dwc_otg_adp_handle_sns_intr(core_if); ++ } ++ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) { ++ DWC_PRINTF("ADP timeout interrupt\n"); ++ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32); ++ } ++ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) { ++ DWC_PRINTF("ADP Probe interrupt\n"); ++ adpctl.b.adp_prb_int = 1; ++ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32); ++ } ++ ++// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0); ++ //dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("RETURN FROM ADP ISR\n"); ++ ++ return retval; ++} ++ ++/** ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ hprt0_data_t hprt0; ++ gpwrdn_data_t gpwrdn; ++ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n"); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /* check which value is for device mode and which for Host mode */ ++ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */ ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } else { ++ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 0; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++#endif ++ return 1; ++} +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_adp.h b/drivers/usb/host/dwc_otg/dwc_otg_adp.h +new file mode 100644 +index 000000000000..4110b25d2002 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h +@@ -0,0 +1,80 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $ ++ * $Revision: #7 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_ADP_H__ ++#define __DWC_OTG_ADP_H__ ++ ++/** ++ * @file ++ * ++ * This file contains the Attach Detect Protocol interfaces and defines ++ * (functions) and structures for Linux. ++ * ++ */ ++ ++#define DWC_OTG_ADP_UNATTACHED 0 ++#define DWC_OTG_ADP_ATTACHED 1 ++#define DWC_OTG_ADP_UNKOWN 2 ++ ++typedef struct dwc_otg_adp { ++ uint32_t adp_started; ++ uint32_t initial_probe; ++ int32_t probe_timer_values[2]; ++ uint32_t probe_enabled; ++ uint32_t sense_enabled; ++ dwc_timer_t *sense_timer; ++ uint32_t sense_timer_started; ++ dwc_timer_t *vbuson_timer; ++ uint32_t vbuson_timer_started; ++ uint32_t attached; ++ uint32_t probe_counter; ++ uint32_t gpwrdn; ++} dwc_otg_adp_t; ++ ++/** ++ * Attach Detect Protocol functions ++ */ ++ ++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value); ++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if); ++ ++#endif //__DWC_OTG_ADP_H__ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_attr.c b/drivers/usb/host/dwc_otg/dwc_otg_attr.c +new file mode 100644 +index 000000000000..9da0c92aaeca +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c +@@ -0,0 +1,1210 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ ++ * $Revision: #44 $ ++ * $Date: 2010/11/29 $ ++ * $Change: 1636033 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. The Linux driver attributes ++ * feature will be used to provide the Linux Diagnostic ++ * Interface. These attributes are accessed through sysfs. ++ */ ++ ++/** @page "Linux Module Attributes" ++ * ++ * The Linux module attributes feature is used to provide the Linux ++ * Diagnostic Interface. These attributes are accessed through sysfs. ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. ++ ++ The following table shows the attributes. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
Name Description Access
mode Returns the current mode: 0 for device mode, 1 for host mode Read
hnpcapable Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
srpcapable Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
hsic_connect Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. ++ Read returns the current value. Read/Write
inv_sel_hsic Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. ++ Read returns the current value. Read/Write
hnp Initiates the Host Negotiation Protocol. Read returns the status. Read/Write
srp Initiates the Session Request Protocol. Read returns the status. Read/Write
buspower Gets or sets the Power State of the bus (0 - Off or 1 - On) Read/Write
bussuspend Suspends the USB bus. Read/Write
busconnected Gets the connection status of the bus Read
gotgctl Gets or sets the Core Control Status Register. Read/Write
gusbcfg Gets or sets the Core USB Configuration Register Read/Write
grxfsiz Gets or sets the Receive FIFO Size Register Read/Write
gnptxfsiz Gets or sets the non-periodic Transmit Size Register Read/Write
gpvndctl Gets or sets the PHY Vendor Control Register Read/Write
ggpio Gets the value in the lower 16-bits of the General Purpose IO Register ++ or sets the upper 16 bits. Read/Write
guid Gets or sets the value of the User ID Register Read/Write
gsnpsid Gets the value of the Synopsys ID Regester Read
devspeed Gets or sets the device speed setting in the DCFG register Read/Write
enumspeed Gets the device enumeration Speed. Read
hptxfsiz Gets the value of the Host Periodic Transmit FIFO Read
hprt0 Gets or sets the value in the Host Port Control and Status Register Read/Write
regoffset Sets the register offset for the next Register Access Read/Write
regvalue Gets or sets the value of the register at the offset in the regoffset attribute. Read/Write
remote_wakeup On read, shows the status of Remote Wakeup. On write, initiates a remote ++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote ++ Wakeup signalling bit in the Device Control Register is set for 1 ++ milli-second. Read/Write
rem_wakeup_pwrdn On read, shows the status core - hibernated or not. On write, initiates ++ a remote wakeup of the device from Hibernation. Read/Write
mode_ch_tim_en This bit is used to enable or disable the host core to wait for 200 PHY ++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00 ++ after Suspend or LPM. Read/Write
fr_interval On read, shows the value of HFIR Frame Interval. On write, dynamically ++ reload HFIR register during runtime. The application can write a value to this ++ register only after the Port Enable bit of the Host Port Control and Status ++ register (HPRT.PrtEnaPort) has been set Read/Write
disconnect_us On read, shows the status of disconnect_device_us. On write, sets disconnect_us ++ which causes soft disconnect for 100us. Applicable only for device mode of operation. Read/Write
regdump Dumps the contents of core registers. Read
spramdump Dumps the contents of core registers. Read
hcddump Dumps the current HCD state. Read
hcd_frrem Shows the average value of the Frame Remaining ++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt ++ occurs. This can be used to determine the average interrupt latency. Also ++ shows the average Frame Remaining value for start_transfer and the "a" and ++ "b" sample points. The "a" and "b" sample points may be used during debugging ++ bto determine how long it takes to execute a section of the HCD code. Read
rd_reg_test Displays the time required to read the GNPTXFSIZ register many times ++ (the output shows the number of times the register is read). ++ Read
wr_reg_test Displays the time required to write the GNPTXFSIZ register many times ++ (the output shows the number of times the register is written). ++ Read
lpm_response Gets or sets lpm_response mode. Applicable only in device mode. ++ Write
sleep_status Shows sleep status of device. ++ Read
++ ++ Example usage: ++ To get the current mode: ++ cat /sys/devices/lm0/mode ++ ++ To power down the USB: ++ echo 0 > /sys/devices/lm0/buspower ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#ifdef LM_INTERFACE ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PCI_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++#endif ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++#include "dwc_otg_dbg.h" ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#endif ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++/** @name Functions for Show/Store of Attributes */ ++/**@{*/ ++ ++/** ++ * Helper function returning the otg_device structure of the given device ++ */ ++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++{ ++ dwc_otg_device_t *otg_dev; ++ DWC_OTG_GETDRVDEV(otg_dev, _dev); ++ return otg_dev; ++} ++ ++/** ++ * Show the register offset of the Register Access. ++ */ ++static ssize_t regoffset_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", ++ otg_dev->os_dep.reg_offset); ++} ++ ++/** ++ * Set the register offset for the next Register Access Read/Write ++ */ ++static ssize_t regoffset_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t offset = simple_strtoul(buf, NULL, 16); ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ if (offset < SZ_256K) { ++#elif defined(PCI_INTERFACE) ++ if (offset < 0x00040000) { ++#endif ++ otg_dev->os_dep.reg_offset = offset; ++ } else { ++ dev_err(_dev, "invalid offset\n"); ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); ++ ++/** ++ * Show the value of the register at the offset in the reg_offset ++ * attribute. ++ */ ++static ssize_t regvalue_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val; ++ volatile uint32_t *addr; ++ ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ val = DWC_READ_REG32(addr); ++ return snprintf(buf, ++ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, ++ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, ++ val); ++ } else { ++ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); ++ return sprintf(buf, "invalid offset\n"); ++ } ++} ++ ++/** ++ * Store the value in the register at the offset in the reg_offset ++ * attribute. ++ * ++ */ ++static ssize_t regvalue_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ volatile uint32_t *addr; ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ DWC_WRITE_REG32(addr, val); ++ } else { ++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", ++ otg_dev->os_dep.reg_offset); ++ } ++ return count; ++} ++ ++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); ++ ++/* ++ * Attributes ++ */ ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); ++ ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, ++ &(otg_dev->core_if->core_global_regs->gusbcfg), ++ "GUSBCFG"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, ++ &(otg_dev->core_if->core_global_regs->grxfsiz), ++ "GRXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, ++ &(otg_dev->core_if->core_global_regs->gnptxfsiz), ++ "GNPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, ++ &(otg_dev->core_if->core_global_regs->gpvndctl), ++ "GPVNDCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, ++ &(otg_dev->core_if->core_global_regs->ggpio), ++ "GGPIO"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), ++ "GUID"); ++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, ++ &(otg_dev->core_if->core_global_regs->gsnpsid), ++ "GSNPSID"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, ++ &(otg_dev->core_if->core_global_regs->hptxfsiz), ++ "HPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); ++ ++/** ++ * @todo Add code to initiate the HNP. ++ */ ++/** ++ * Show the HNP status bit ++ */ ++static ssize_t hnp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "HstNegScs = 0x%x\n", ++ dwc_otg_get_hnpstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HNP Request bit ++ */ ++static ssize_t hnp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_hnpreq(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); ++ ++/** ++ * @todo Add code to initiate the SRP. ++ */ ++/** ++ * Show the SRP status bit ++ */ ++static ssize_t srp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "SesReqScs = 0x%x\n", ++ dwc_otg_get_srpstatus(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++ ++/** ++ * Set the SRP Request bit ++ */ ++static ssize_t srp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_pcd_initiate_srp(otg_dev->pcd); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(srp, 0644, srp_show, srp_store); ++ ++/** ++ * @todo Need to do more for power on/off? ++ */ ++/** ++ * Show the Bus Power status ++ */ ++static ssize_t buspower_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Power = 0x%x\n", ++ dwc_otg_get_prtpower(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Power status ++ */ ++static ssize_t buspower_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t on = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtpower(otg_dev->core_if, on); ++ return count; ++} ++ ++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); ++ ++/** ++ * @todo Need to do more for suspend? ++ */ ++/** ++ * Show the Bus Suspend status ++ */ ++static ssize_t bussuspend_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Suspend = 0x%x\n", ++ dwc_otg_get_prtsuspend(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Suspend status ++ */ ++static ssize_t bussuspend_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtsuspend(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); ++ ++/** ++ * Show the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", ++ dwc_otg_get_mode_ch_tim(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); ++ ++/** ++ * Show the value of HFIR Frame Interval bitfield ++ */ ++static ssize_t fr_interval_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Frame Interval = 0x%x\n", ++ dwc_otg_get_fr_interval(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HFIR Frame Interval value ++ */ ++static ssize_t fr_interval_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 10); ++ dwc_otg_set_fr_interval(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); ++ ++/** ++ * Show the status of Remote Wakeup. ++ */ ++static ssize_t remote_wakeup_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ return sprintf(buf, ++ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", ++ dwc_otg_get_remotewakesig(otg_dev->core_if), ++ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), ++ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif /* DWC_HOST_ONLY */ ++} ++ ++/** ++ * Initiate a remote wakeup of the host. The Device control register ++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable ++ * flag is set. ++ * ++ */ ++static ssize_t remote_wakeup_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (val & 1) { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); ++ } else { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, ++ remote_wakeup_store); ++ ++/** ++ * Show the whether core is hibernated or not. ++ */ ++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (dwc_otg_get_core_state(otg_dev->core_if)) { ++ DWC_PRINTF("Core is in hibernation\n"); ++ } else { ++ DWC_PRINTF("Core is not in hibernation\n"); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return 0; ++} ++ ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/** ++ * Initiate a remote wakeup of the device to exit from hibernation. ++ */ ++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, ++ rem_wakeup_pwrdn_store); ++ ++static ssize_t disconnect_us(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ DWC_PRINTF("The Passed value is %04x\n", val); ++ ++ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); ++ ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t regdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_dump_global_registers(otg_dev->core_if); ++ if (dwc_otg_is_host_mode(otg_dev->core_if)) { ++ dwc_otg_dump_host_registers(otg_dev->core_if); ++ } else { ++ dwc_otg_dump_dev_registers(otg_dev->core_if); ++ ++ } ++ return sprintf(buf, "Register Dump\n"); ++} ++ ++DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t spramdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ //dwc_otg_dump_spram(otg_dev->core_if); ++ ++ return sprintf(buf, "SPRAM Dump\n"); ++} ++ ++DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0); ++ ++/** ++ * Dump the current hcd state. ++ */ ++static ssize_t hcddump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_hcd_dump_state(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump\n"); ++} ++ ++DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ */ ++static ssize_t hcd_frrem_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_hcd_dump_frrem(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump Frame Remaining\n"); ++} ++ ++DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0); ++ ++/** ++ * Displays the time required to read the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is read). ++ */ ++#define RW_REG_COUNT 10000000 ++#define MSEC_PER_JIFFIE 1000/HZ ++static ssize_t rd_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0); ++ ++/** ++ * Displays the time required to write the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is written). ++ */ ++static ssize_t wr_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t reg_val; ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ ++/** ++* Show the lpm_response attribute. ++*/ ++static ssize_t lpmresp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) ++ return sprintf(buf, "** LPM is DISABLED **\n"); ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return sprintf(buf, "** Current mode is not device mode\n"); ++ } ++ return sprintf(buf, "lpm_response = %d\n", ++ dwc_otg_get_lpmresponse(otg_dev->core_if)); ++} ++ ++/** ++* Store the lpm_response attribute. ++*/ ++static ssize_t lpmresp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ dwc_otg_set_lpmresponse(otg_dev->core_if, val); ++ return count; ++} ++ ++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); ++ ++/** ++* Show the sleep_status attribute. ++*/ ++static ssize_t sleepstatus_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Sleep Status = %d\n", ++ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Store the sleep_status attribure. ++ */ ++static ssize_t sleepstatus_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ ++ DWC_PRINTF("Host initiated resume\n"); ++ dwc_otg_set_prtresume(otg_dev->core_if, 1); ++ } ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, ++ sleepstatus_store); ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ ++ ++/**@}*/ ++ ++/** ++ * Create the device files ++ */ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ int error; ++ ++ error = device_create_file(&dev->dev, &dev_attr_regoffset); ++ error = device_create_file(&dev->dev, &dev_attr_regvalue); ++ error = device_create_file(&dev->dev, &dev_attr_mode); ++ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_srpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); ++ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ error = device_create_file(&dev->dev, &dev_attr_hnp); ++ error = device_create_file(&dev->dev, &dev_attr_srp); ++ error = device_create_file(&dev->dev, &dev_attr_buspower); ++ error = device_create_file(&dev->dev, &dev_attr_bussuspend); ++ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ error = device_create_file(&dev->dev, &dev_attr_fr_interval); ++ error = device_create_file(&dev->dev, &dev_attr_busconnected); ++ error = device_create_file(&dev->dev, &dev_attr_gotgctl); ++ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); ++ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); ++ error = device_create_file(&dev->dev, &dev_attr_ggpio); ++ error = device_create_file(&dev->dev, &dev_attr_guid); ++ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); ++ error = device_create_file(&dev->dev, &dev_attr_devspeed); ++ error = device_create_file(&dev->dev, &dev_attr_enumspeed); ++ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_hprt0); ++ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); ++ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ error = device_create_file(&dev->dev, &dev_attr_disconnect_us); ++ error = device_create_file(&dev->dev, &dev_attr_regdump); ++ error = device_create_file(&dev->dev, &dev_attr_spramdump); ++ error = device_create_file(&dev->dev, &dev_attr_hcddump); ++ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); ++ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); ++ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ error = device_create_file(&dev->dev, &dev_attr_lpm_response); ++ error = device_create_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} ++ ++/** ++ * Remove the device files ++ */ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ device_remove_file(&dev->dev, &dev_attr_regoffset); ++ device_remove_file(&dev->dev, &dev_attr_regvalue); ++ device_remove_file(&dev->dev, &dev_attr_mode); ++ device_remove_file(&dev->dev, &dev_attr_hnpcapable); ++ device_remove_file(&dev->dev, &dev_attr_srpcapable); ++ device_remove_file(&dev->dev, &dev_attr_hsic_connect); ++ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ device_remove_file(&dev->dev, &dev_attr_hnp); ++ device_remove_file(&dev->dev, &dev_attr_srp); ++ device_remove_file(&dev->dev, &dev_attr_buspower); ++ device_remove_file(&dev->dev, &dev_attr_bussuspend); ++ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ device_remove_file(&dev->dev, &dev_attr_fr_interval); ++ device_remove_file(&dev->dev, &dev_attr_busconnected); ++ device_remove_file(&dev->dev, &dev_attr_gotgctl); ++ device_remove_file(&dev->dev, &dev_attr_gusbcfg); ++ device_remove_file(&dev->dev, &dev_attr_grxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gpvndctl); ++ device_remove_file(&dev->dev, &dev_attr_ggpio); ++ device_remove_file(&dev->dev, &dev_attr_guid); ++ device_remove_file(&dev->dev, &dev_attr_gsnpsid); ++ device_remove_file(&dev->dev, &dev_attr_devspeed); ++ device_remove_file(&dev->dev, &dev_attr_enumspeed); ++ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_hprt0); ++ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); ++ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ device_remove_file(&dev->dev, &dev_attr_disconnect_us); ++ device_remove_file(&dev->dev, &dev_attr_regdump); ++ device_remove_file(&dev->dev, &dev_attr_spramdump); ++ device_remove_file(&dev->dev, &dev_attr_hcddump); ++ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); ++ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); ++ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ device_remove_file(&dev->dev, &dev_attr_lpm_response); ++ device_remove_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_attr.h b/drivers/usb/host/dwc_otg/dwc_otg_attr.h +new file mode 100644 +index 000000000000..e10b67f97c52 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h +@@ -0,0 +1,89 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ ++ * $Revision: #13 $ ++ * $Date: 2010/06/21 $ ++ * $Change: 1532021 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_ATTR_H__) ++#define __DWC_OTG_ATTR_H__ ++ ++/** @file ++ * This file contains the interface to the Linux device attributes. ++ */ ++extern struct device_attribute dev_attr_regoffset; ++extern struct device_attribute dev_attr_regvalue; ++ ++extern struct device_attribute dev_attr_mode; ++extern struct device_attribute dev_attr_hnpcapable; ++extern struct device_attribute dev_attr_srpcapable; ++extern struct device_attribute dev_attr_hnp; ++extern struct device_attribute dev_attr_srp; ++extern struct device_attribute dev_attr_buspower; ++extern struct device_attribute dev_attr_bussuspend; ++extern struct device_attribute dev_attr_mode_ch_tim_en; ++extern struct device_attribute dev_attr_fr_interval; ++extern struct device_attribute dev_attr_busconnected; ++extern struct device_attribute dev_attr_gotgctl; ++extern struct device_attribute dev_attr_gusbcfg; ++extern struct device_attribute dev_attr_grxfsiz; ++extern struct device_attribute dev_attr_gnptxfsiz; ++extern struct device_attribute dev_attr_gpvndctl; ++extern struct device_attribute dev_attr_ggpio; ++extern struct device_attribute dev_attr_guid; ++extern struct device_attribute dev_attr_gsnpsid; ++extern struct device_attribute dev_attr_devspeed; ++extern struct device_attribute dev_attr_enumspeed; ++extern struct device_attribute dev_attr_hptxfsiz; ++extern struct device_attribute dev_attr_hprt0; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern struct device_attribute dev_attr_lpm_response; ++extern struct device_attribute devi_attr_sleep_status; ++#endif ++ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++#endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cfi.c b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c +new file mode 100644 +index 000000000000..bbb3d32093d0 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c +@@ -0,0 +1,1876 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * This file contains the most of the CFI(Core Feature Interface) ++ * implementation for the OTG. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_cfi.h" ++ ++/** This definition should actually migrate to the Portability Library */ ++#define DWC_CONSTANT_CPU_TO_LE16(x) (x) ++ ++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); ++ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req); ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); ++ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); ++ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); ++ ++/** This is the header of the all features descriptor */ ++static cfi_all_features_header_t all_props_desc_header = { ++ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), ++ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), ++ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), ++}; ++ ++/** This is an array of statically allocated feature descriptors */ ++static cfi_feature_desc_header_t prop_descs[] = { ++ ++ /* FT_ID_DMA_MODE */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), ++ }, ++ ++ /* FT_ID_DMA_BUFFER_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_BUFF_ALIGN */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_DMA_CONCAT_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_CIRCULAR */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_THRESHOLD_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DFIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RO, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_TX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_RX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ } ++}; ++ ++/** The table of feature names */ ++cfi_string_t prop_name_table[] = { ++ {FT_ID_DMA_MODE, "dma_mode"}, ++ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, ++ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, ++ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, ++ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, ++ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, ++ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, ++ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, ++ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, ++ {} ++}; ++ ++/************************************************************************/ ++ ++/** ++ * Returns the name of the feature by its ID ++ * or NULL if no featute ID matches. ++ * ++ */ ++const uint8_t *get_prop_name(uint16_t prop_id, int *len) ++{ ++ cfi_string_t *pstr; ++ *len = 0; ++ ++ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { ++ if (pstr->id == prop_id) { ++ *len = DWC_STRLEN(pstr->s); ++ return pstr->s; ++ } ++ } ++ return NULL; ++} ++ ++/** ++ * This function handles all CFI specific control requests. ++ * ++ * Return a negative value to stall the DCE. ++ */ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) ++{ ++ int retval = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ cfiobject_t *cfi = pcd->cfi; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); ++ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); ++ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); ++ uint32_t regaddr = 0; ++ uint32_t regval = 0; ++ ++ /* Save this Control Request in the CFI object. ++ * The data field will be assigned in the data stage completion CB function. ++ */ ++ cfi->ctrl_req = *ctrl; ++ cfi->ctrl_req.data = NULL; ++ ++ cfi->need_gadget_att = 0; ++ cfi->need_status_in_complete = 0; ++ ++ switch (ctrl->bRequest) { ++ case VEN_CORE_GET_FEATURES: ++ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); ++ if (retval >= 0) { ++ //dump_msg(cfi->buf_in.buf, retval); ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ retval = 0; ++ break; ++ ++ case VEN_CORE_GET_FEATURE: ++ CFI_INFO("VEN_CORE_GET_FEATURE\n"); ++ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, ++ pcd, ctrl); ++ if (retval >= 0) { ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); ++ dump_msg(cfi->buf_in.buf, retval); ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ CFI_INFO("VEN_CORE_SET_FEATURE\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the feature to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ case VEN_CORE_RESET_FEATURES: ++ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); ++ cfi->need_gadget_att = 1; ++ cfi->need_status_in_complete = 1; ++ retval = cfi_preproc_reset(pcd, ctrl); ++ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); ++ break; ++ ++ case VEN_CORE_ACTIVATE_FEATURES: ++ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); ++ break; ++ ++ case VEN_CORE_READ_REGISTER: ++ CFI_INFO("VEN_CORE_READ_REGISTER\n"); ++ /* wValue optionally contains the HI WORD of the register offset and ++ * wIndex contains the LOW WORD of the register offset ++ */ ++ if (wValue == 0) { ++ /* @TODO - MAS - fix the access to the base field */ ++ regaddr = 0; ++ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base; ++ //GET_CORE_IF(pcd)->co ++ regaddr |= wIndex; ++ } else { ++ regaddr = (wValue << 16) | wIndex; ++ } ++ ++ /* Read a 32-bit value of the memory at the regaddr */ ++ regval = DWC_READ_REG32((uint32_t *) regaddr); ++ ++ ep = &pcd->ep0; ++ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); ++ ep->dwc_ep.is_in = 1; ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ cfi->need_gadget_att = 0; ++ retval = 0; ++ break; ++ ++ case VEN_CORE_WRITE_REGISTER: ++ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the register to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ default: ++ retval = -DWC_E_NOT_SUPPORTED; ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function prepares the core features descriptors and copies its ++ * raw representation into the buffer . ++ * ++ * The buffer structure is as follows: ++ * all_features_header (8 bytes) ++ * features_#1 (8 bytes + feature name string length) ++ * features_#2 (8 bytes + feature name string length) ++ * ..... ++ * features_#n - where n=the total count of feature descriptors ++ */ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) ++{ ++ cfi_feature_desc_header_t *prop_hdr = prop_descs; ++ cfi_feature_desc_header_t *prop; ++ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; ++ cfi_all_features_header_t *tmp; ++ uint8_t *tmpbuf = buf; ++ const uint8_t *pname = NULL; ++ int i, j, namelen = 0, totlen; ++ ++ /* Prepare and copy the core features into the buffer */ ++ CFI_INFO("%s:\n", __func__); ++ ++ tmp = (cfi_all_features_header_t *) tmpbuf; ++ *tmp = *all_props_hdr; ++ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; ++ ++ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); ++ for (i = 0; i < j; i++, prop_hdr++) { ++ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); ++ prop = (cfi_feature_desc_header_t *) tmpbuf; ++ *prop = *prop_hdr; ++ ++ prop->bNameLen = namelen; ++ prop->wLength = ++ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + ++ namelen); ++ ++ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; ++ dwc_memcpy(tmpbuf, pname, namelen); ++ tmpbuf += namelen; ++ } ++ ++ totlen = tmpbuf - buf; ++ ++ if (totlen > 0) { ++ tmp = (cfi_all_features_header_t *) buf; ++ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); ++ } ++ ++ return totlen; ++} ++ ++/** ++ * This function releases all the dynamic memory in the CFI object. ++ */ ++static void cfi_release(cfiobject_t * cfiobj) ++{ ++ cfi_ep_t *cfiep; ++ dwc_list_link_t *tmp; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ if (cfiobj->buf_in.buf) { ++ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, ++ cfiobj->buf_in.addr); ++ cfiobj->buf_in.buf = NULL; ++ } ++ ++ if (cfiobj->buf_out.buf) { ++ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, ++ cfiobj->buf_out.addr); ++ cfiobj->buf_out.buf = NULL; ++ } ++ ++ /* Free the Buffer Setup values for each EP */ ++ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ cfi_free_ep_bs_dyn_data(cfiep); ++ } ++} ++ ++/** ++ * This function frees the dynamically allocated EP buffer setup data. ++ */ ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) ++{ ++ if (cfiep->bm_sg) { ++ DWC_FREE(cfiep->bm_sg); ++ cfiep->bm_sg = NULL; ++ } ++ ++ if (cfiep->bm_align) { ++ DWC_FREE(cfiep->bm_align); ++ cfiep->bm_align = NULL; ++ } ++ ++ if (cfiep->bm_concat) { ++ if (NULL != cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ DWC_FREE(cfiep->bm_concat); ++ cfiep->bm_concat = NULL; ++ } ++} ++ ++/** ++ * This function initializes the default values of the features ++ * for a specific endpoint and should be called only once when ++ * the EP is enabled first time. ++ */ ++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) ++{ ++ int retval = 0; ++ ++ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t)); ++ if (NULL == cfiep->bm_sg) { ++ CFI_INFO("Failed to allocate memory for SG feature value\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ ++ /* For the Concatenation feature's default value we do not allocate ++ * memory for the wTxBytes field - it will be done in the set_feature_value ++ * request handler. ++ */ ++ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t)); ++ if (NULL == cfiep->bm_concat) { ++ CFI_INFO ++ ("Failed to allocate memory for CONCATENATION feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ ++ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t)); ++ if (NULL == cfiep->bm_align) { ++ CFI_INFO ++ ("Failed to allocate memory for Alignment feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ DWC_FREE(cfiep->bm_concat); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); ++ ++ return retval; ++} ++ ++/** ++ * The callback function that notifies the CFI on the activation of ++ * an endpoint in the PCD. The following steps are done in this function: ++ * ++ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's ++ * active endpoint) ++ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP ++ * Set the Buffer Mode to standard ++ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) ++ * Add the cfi_ep_t object to the list of active endpoints in the CFI object ++ */ ++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ cfi_ep_t *cfiep; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, ++ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); ++ /* MAS - Check whether this endpoint already is in the list */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ ++ if (NULL == cfiep) { ++ /* Allocate a cfi_ep_t object */ ++ cfiep = DWC_ALLOC(sizeof(cfi_ep_t)); ++ if (NULL == cfiep) { ++ CFI_INFO ++ ("Unable to allocate memory for in function %s\n", ++ __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); ++ ++ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ ++ cfiep->ep = ep; ++ ++ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ ++ ep->dwc_ep.descs = ++ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP * ++ sizeof(dwc_otg_dma_desc_t), ++ &ep->dwc_ep.descs_dma_addr); ++ ++ if (NULL == ep->dwc_ep.descs) { ++ DWC_FREE(cfiep); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_LIST_INIT(&cfiep->lh); ++ ++ /* Set the buffer mode to BM_STANDARD. It will be modified ++ * when building descriptors for a specific buffer mode */ ++ ep->dwc_ep.buff_mode = BM_STANDARD; ++ ++ /* Create and initialize the default values for this EP's Buffer modes */ ++ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) ++ return retval; ++ ++ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ ++ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); ++ retval = 0; ++ } else { /* The sought EP already is in the list */ ++ CFI_INFO("%s: The sought EP already is in the list\n", ++ __func__); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function is called when the data stage of a 3-stage Control Write request ++ * is complete. ++ * ++ */ ++static int cfi_ctrl_write_complete(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd) ++{ ++ uint32_t addr, reg_value; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ uint8_t *buf = cfi->buf_out.buf; ++ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; ++ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* ++ * Save the pointer to the data stage in the ctrl_req's field. ++ * The request should be already saved in the command stage by now. ++ */ ++ ctrl_req->data = cfi->buf_out.buf; ++ cfi->need_status_in_complete = 0; ++ cfi->need_gadget_att = 0; ++ ++ switch (bRequest) { ++ case VEN_CORE_WRITE_REGISTER: ++ /* The buffer contains raw data of the new value for the register */ ++ reg_value = *((uint32_t *) buf); ++ if (wValue == 0) { ++ addr = 0; ++ //addr = (uint32_t) pcd->otg_dev->os_dep.base; ++ addr += wIndex; ++ } else { ++ addr = (wValue << 16) | wIndex; ++ } ++ ++ //writel(reg_value, addr); ++ ++ retval = 0; ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ /* The buffer contains raw data of the new value of the feature */ ++ retval = cfi_set_feature_value(pcd); ++ if (retval < 0) ++ return retval; ++ ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function builds the DMA descriptors for the SG buffer mode. ++ */ ++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint32_t txsize, off; ++ ++ txsize = sgval->wSize; ++ off = sgval->bOffset; ++ ++// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", ++// __func__, cfiep->ep->ep.name, txsize, off); ++ ++ for (i = 0; i < sgval->bCount; i++) { ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->buf = buff_addr; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ /* Set the next address of the buffer */ ++ buff_addr += txsize + off; ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ /* Save the last DMA descriptor pointer */ ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = sgval->bCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Concatenation buffer mode. ++ */ ++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint16_t *txsize; ++ ++ txsize = concatval->wTxBytes; ++ ++ for (i = 0; i < concatval->hdr.bDescCount; i++) { ++ desc->buf = buff_addr; ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = *txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ txsize++; ++ /* Set the next address of the buffer */ ++ buff_addr += UGETW(ep->desc->wMaxPacketSize); ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = concatval->hdr.bDescCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Circular buffer mode ++ */ ++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ /* @todo: MAS - add implementation when this feature needs to be tested */ ++} ++ ++/** ++ * This function builds the DMA descriptors for the Alignment buffer mode ++ */ ++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 1; ++ desc->status.b.ioc = 1; ++ desc->status.b.sp = ep->dwc_ep.sent_zlp; ++ desc->status.b.bytes = req->length; ++ /* Adjust the buffer alignment */ ++ desc->buf = (buff_addr + alignval->bAlign); ++ desc->status.b.bs = BS_HOST_READY; ++ cfiep->dma_desc_last = desc; ++ cfiep->desc_count = 1; ++} ++ ++/** ++ * This function builds the DMA descriptors chain for different modes of the ++ * buffer setup of an endpoint. ++ */ ++static void cfi_build_descriptors(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, ++ dwc_otg_pcd_request_t * req) ++{ ++ cfi_ep_t *cfiep; ++ ++ /* Get the cfiep by the dwc_otg_pcd_ep */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Unable to find a matching active endpoint\n", ++ __func__); ++ return; ++ } ++ ++ cfiep->xfer_len = req->length; ++ ++ /* Iterate through all the DMA descriptors */ ++ switch (cfiep->ep->dwc_ep.buff_mode) { ++ case BM_SG: ++ cfi_build_sg_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CONCAT: ++ cfi_build_concat_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CIRCULAR: ++ cfi_build_circ_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_ALIGN: ++ cfi_build_align_descs(cfi, cfiep, req); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * Allocate DMA buffer for different Buffer modes. ++ */ ++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags) ++{ ++ return DWC_DMA_ALLOC(size, dma); ++} ++ ++/** ++ * This function initializes the CFI object. ++ */ ++int init_cfi(cfiobject_t * cfiobj) ++{ ++ CFI_INFO("%s\n", __func__); ++ ++ /* Allocate a buffer for IN XFERs */ ++ cfiobj->buf_in.buf = ++ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); ++ if (NULL == cfiobj->buf_in.buf) { ++ CFI_INFO("Unable to allocate buffer for INs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Allocate a buffer for OUT XFERs */ ++ cfiobj->buf_out.buf = ++ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); ++ if (NULL == cfiobj->buf_out.buf) { ++ CFI_INFO("Unable to allocate buffer for OUT\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the callback function pointers */ ++ cfiobj->ops.release = cfi_release; ++ cfiobj->ops.ep_enable = cfi_ep_enable; ++ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; ++ cfiobj->ops.build_descriptors = cfi_build_descriptors; ++ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; ++ ++ /* Initialize the list of active endpoints in the CFI object */ ++ DWC_LIST_INIT(&cfiobj->active_eps); ++ ++ return 0; ++} ++ ++/** ++ * This function reads the required feature's current value into the buffer ++ * ++ * @retval: Returns negative as error, or the data length of the feature ++ */ ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t dfifo, rxfifo, txfifo; ++ ++ switch (ctrl_req->wIndex) { ++ /* Whether the DDMA is enabled or not */ ++ case FT_ID_DMA_MODE: ++ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; ++ retval = 1; ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ dfifo = get_dfifo_size(coreif); ++ *((uint16_t *) buf) = dfifo; ++ retval = sizeof(uint16_t); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = get_txfifo_size(pcd, ctrl_req->wValue); ++ if (retval >= 0) { ++ txfifo = retval; ++ *((uint16_t *) buf) = txfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = get_rxfifo_size(coreif, ctrl_req->wValue); ++ if (retval >= 0) { ++ rxfifo = retval; ++ *((uint16_t *) buf) = rxfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function resets the SG for the specified EP to its default value ++ */ ++static int cfi_reset_sg_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Alignment for the specified EP to its default value ++ */ ++static int cfi_reset_align_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Concatenation for the specified EP to its default value ++ * This function will also set the value of the wTxBytes field to NULL after ++ * freeing the memory previously allocated for this field. ++ */ ++static int cfi_reset_concat_val(cfi_ep_t * cfiep) ++{ ++ /* First we need to free the wTxBytes field */ ++ if (cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets all the buffer setups of the specified endpoint ++ */ ++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) ++{ ++ cfi_reset_sg_val(cfiep); ++ cfi_reset_align_val(cfiep); ++ cfi_reset_concat_val(cfiep); ++ return 0; ++} ++ ++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, ++ uint8_t rx_rst, uint8_t tx_rst) ++{ ++ int retval = -DWC_E_INVALID; ++ uint16_t tx_siz[15]; ++ uint16_t rx_siz = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ ++ if (rx_rst) { ++ rx_siz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ tx_siz[i] = ++ core_if->core_params->dev_tx_fifo_size[i]; ++ core_if->core_params->dev_tx_fifo_size[i] = ++ core_if->init_txfsiz[i]; ++ } ++ } else { ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ if (NULL == ep) { ++ CFI_INFO ++ ("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ tx_siz[0] = ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - ++ 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = ++ GET_CORE_IF(pcd)->init_txfsiz[ep-> ++ dwc_ep.tx_fifo_num - ++ 1]; ++ } ++ } ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All(FIFO size)\n", ++ __func__); ++ if (rx_rst) { ++ params->dev_rx_fifo_size = rx_siz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++ i++) { ++ core_if-> ++ core_params->dev_tx_fifo_size[i] = ++ tx_siz[i]; ++ } ++ } else { ++ params->dev_tx_fifo_size[ep-> ++ dwc_ep.tx_fifo_num - ++ 1] = tx_siz[0]; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); ++ if (retval < 0) { ++ return retval; ++ } ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, ++ uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_sg_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_sg_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Buffer Setup\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_concat_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_concat_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Concatenation Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_align_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_align_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Aliignment Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++ ++} ++ ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = 0; ++ ++ switch (req->wIndex) { ++ case 0: ++ /* Reset all features */ ++ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Reset the SG buffer setup */ ++ retval = ++ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Reset the Concatenation buffer setup */ ++ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ /* Reset the Alignment buffer setup */ ++ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = ++ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ default: ++ break; ++ } ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the SG buffer setup. ++ */ ++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t inaddr, outaddr; ++ cfi_ep_t *epin, *epout; ++ ddma_sg_buffer_setup_t *psgval; ++ uint32_t desccount, size; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ psgval = (ddma_sg_buffer_setup_t *) buf; ++ desccount = (uint32_t) psgval->bCount; ++ size = (uint32_t) psgval->wSize; ++ ++ /* Check the DMA descriptor count */ ++ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { ++ CFI_INFO ++ ("%s: The count of DMA Descriptors should be between 1 and %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ /* Check the DMA descriptor count */ ++ ++ if (size == 0) { ++ ++ CFI_INFO("%s: The transfer size should be at least 1 byte\n", ++ __func__); ++ ++ return -DWC_E_INVALID; ++ ++ } ++ ++ inaddr = psgval->bInEndpointAddress; ++ outaddr = psgval->bOutEndpointAddress; ++ ++ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); ++ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); ++ ++ if (NULL == epin || NULL == epout) { ++ CFI_INFO ++ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", ++ __func__, inaddr, outaddr); ++ return -DWC_E_INVALID; ++ } ++ ++ epin->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ epout->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ cfi_ep_t *ep; ++ uint8_t addr; ++ ddma_align_buffer_setup_t *palignval; ++ ++ palignval = (ddma_align_buffer_setup_t *) buf; ++ addr = palignval->bEndpointAddress; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_ALIGN; ++ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the Concatenation buffer setup. ++ */ ++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t addr; ++ cfi_ep_t *ep; ++ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; ++ uint16_t *pVals; ++ uint32_t desccount; ++ int i; ++ uint16_t mps; ++ ++ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; ++ desccount = (uint32_t) pConcatValHdr->bDescCount; ++ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Check the DMA descriptor count */ ++ if (desccount > MAX_DMA_DESCS_PER_EP) { ++ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ addr = pConcatValHdr->bEndpointAddress; ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ mps = UGETW(ep->ep->desc->wMaxPacketSize); ++ ++#if 0 ++ for (i = 0; i < desccount; i++) { ++ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); ++ } ++ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); ++#endif ++ ++ /* Check the wTxSizes to be less than or equal to the mps */ ++ for (i = 0; i < desccount; i++) { ++ if (pVals[i] > mps) { ++ CFI_INFO ++ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", ++ __func__, i, pVals[i]); ++ return -DWC_E_INVALID; ++ } ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_CONCAT; ++ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Free the previously allocated storage for the wTxBytes */ ++ if (ep->bm_concat->wTxBytes) { ++ DWC_FREE(ep->bm_concat->wTxBytes); ++ } ++ ++ /* Allocate a new storage for the wTxBytes field */ ++ ep->bm_concat->wTxBytes = ++ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ if (NULL == ep->bm_concat->wTxBytes) { ++ CFI_INFO("%s: Unable to allocate memory\n", __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Copy the new values into the wTxBytes filed */ ++ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, ++ sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ ++ return 0; ++} ++ ++/** ++ * This function calculates the total of all FIFO sizes ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t dfifo_total = 0; ++ int i; ++ ++ /* The shared RxFIFO size */ ++ dfifo_total = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ /* Add up each TxFIFO size to the total */ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_total += params->dev_tx_fifo_size[i]; ++ } ++ ++ return dfifo_total; ++} ++ ++/** ++ * This function returns Rx FIFO size ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) ++{ ++ switch (wValue >> 8) { ++ case 0: ++ return (core_if->pwron_rxfsiz < ++ 32768) ? core_if->pwron_rxfsiz : 32768; ++ break; ++ case 1: ++ return core_if->core_params->dev_rx_fifo_size; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function returns Tx FIFO size for IN EP ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_by_addr(pcd, wValue & 0xff); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!ep->dwc_ep.is_in) { ++ CFI_INFO ++ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ switch (wValue >> 8) { ++ case 0: ++ return (GET_CORE_IF(pcd)->pwron_txfsiz ++ [ep->dwc_ep.tx_fifo_num - 1] < ++ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep-> ++ dwc_ep.tx_fifo_num ++ - 1] : 32768; ++ break; ++ case 1: ++ return GET_CORE_IF(pcd)->core_params-> ++ dev_tx_fifo_size[ep->dwc_ep.num - 1]; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function checks if the submitted combination of ++ * device mode FIFO sizes is possible or not. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if possible, 0 otherwise. ++ * ++ */ ++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) ++{ ++ uint16_t dfifo_actual = 0; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t start_addr = 0; ++ int i; ++ ++ dfifo_actual = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_actual += params->dev_tx_fifo_size[i]; ++ } ++ ++ if (dfifo_actual > core_if->total_fifo_size) { ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) ++ return 0; ++ ++ if (params->dev_nperio_tx_fifo_size > 32768 ++ || params->dev_nperio_tx_fifo_size < 16) ++ return 0; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > 768 ++ || params->dev_tx_fifo_size[i] < 4) ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) ++ return 0; ++ start_addr = params->dev_rx_fifo_size; ++ ++ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) ++ return 0; ++ start_addr += params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) ++ return 0; ++ start_addr += params->dev_tx_fifo_size[i]; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function resizes Device mode FIFOs ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if successful, 0 otherwise ++ * ++ */ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize[15]; ++ ++ uint32_t rx_fsz_bak; ++ uint32_t nptxfsz_bak; ++ uint32_t txfsz_bak[15]; ++ ++ uint16_t start_address; ++ uint8_t retval = 1; ++ ++ if (!check_fifo_sizes(core_if)) { ++ return 0; ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz); ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz); ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ start_address = params->dev_rx_fifo_size; ++ nptxfifosize.b.startaddr = start_address; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ start_address += nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]); ++ ++ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; ++ txfifosize[i].b.startaddr = start_address; ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize[i].d32); ++ ++ start_address += txfifosize[i].b.depth; ++ } ++ ++ /** Check if register values are set correctly */ ++ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) { ++ retval = 0; ++ } ++ ++ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) { ++ retval = 0; ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ if (txfifosize[i].d32 != ++ DWC_READ_REG32(&global_regs->dtxfsiz[i])) { ++ retval = 0; ++ } ++ } ++ ++ /** If register values are not set correctly, reset old values */ ++ if (retval == 0) { ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfsz_bak[i]); ++ } ++ } ++ } else { ++ return 0; ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ uint16_t ep_addr; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ tx_fifo_size_setup_t *ptxfifoval; ++ ++ ptxfifoval = (tx_fifo_size_setup_t *) buf; ++ ep_addr = ptxfifoval->bEndpointAddress; ++ size = ptxfifoval->wDepth; ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ CFI_INFO ++ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", ++ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", ++ __func__, ep_addr); ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ rx_fifo_size_setup_t *prxfifoval; ++ ++ prxfifoval = (rx_fifo_size_setup_t *) buf; ++ size = prxfifoval->wDepth; ++ ++ fsiz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", ++ __func__); ++ params->dev_rx_fifo_size = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function reads the SG of an EP's buffer setup into the buffer buf ++ */ ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); ++ retval = BS_SG_VAL_DESC_LEN; ++ return retval; ++} ++ ++/** ++ * This function reads the Concatenation value of an EP's buffer mode into ++ * the buffer buf ++ */ ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ uint8_t desc_count; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ /* Copy the header to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); ++ /* Advance the buffer pointer by the header size */ ++ buf += BS_CONCAT_VAL_HDR_LEN; ++ ++ desc_count = ep->bm_concat->hdr.bDescCount; ++ /* Copy alll the wTxBytes to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); ++ ++ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; ++ return retval; ++} ++ ++/** ++ * This function reads the buffer Alignment value of an EP's buffer mode into ++ * the buffer buf ++ * ++ * @return The total number of bytes copied to the buffer or negative error code. ++ */ ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); ++ retval = BS_ALIGN_VAL_HDR_LEN; ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the specified feature ++ * ++ * @param pcd A pointer to the PCD object ++ * ++ * @return 0 if successful, negative error code otherwise to stall the DCE. ++ */ ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ struct dwc_otg_core_if *coreif; ++ cfiobject_t *cfi = pcd->cfi; ++ struct cfi_usb_ctrlrequest *ctrl_req; ++ uint8_t *buf; ++ ctrl_req = &cfi->ctrl_req; ++ ++ buf = pcd->cfi->ctrl_req.data; ++ ++ coreif = GET_CORE_IF(pcd); ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* See which feature is to be modified */ ++ switch (wIndex) { ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) ++ return retval; ++ ++ /* And send this request to the gadget */ ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); ++ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); ++ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif //DWC_UTE_CFI +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cfi.h b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h +new file mode 100644 +index 000000000000..55fd337a283c +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h +@@ -0,0 +1,320 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_CFI_H__) ++#define __DWC_OTG_CFI_H__ ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_cfi_common.h" ++ ++/** ++ * @file ++ * This file contains the CFI related OTG PCD specific common constants, ++ * interfaces(functions and macros) and data structures.The CFI Protocol is an ++ * optional interface for internal testing purposes that a DUT may implement to ++ * support testing of configurable features. ++ * ++ */ ++ ++struct dwc_otg_pcd; ++struct dwc_otg_pcd_ep; ++ ++/** OTG CFI Features (properties) ID constants */ ++/** This is a request for all Core Features */ ++#define FT_ID_DMA_MODE 0x0001 ++#define FT_ID_DMA_BUFFER_SETUP 0x0002 ++#define FT_ID_DMA_BUFF_ALIGN 0x0003 ++#define FT_ID_DMA_CONCAT_SETUP 0x0004 ++#define FT_ID_DMA_CIRCULAR 0x0005 ++#define FT_ID_THRESHOLD_SETUP 0x0006 ++#define FT_ID_DFIFO_DEPTH 0x0007 ++#define FT_ID_TX_FIFO_DEPTH 0x0008 ++#define FT_ID_RX_FIFO_DEPTH 0x0009 ++ ++/**********************************************************/ ++#define CFI_INFO_DEF ++ ++#ifdef CFI_INFO_DEF ++#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); ++#else ++#define CFI_INFO(fmt...) ++#endif ++ ++#define min(x,y) ({ \ ++ x < y ? x : y; }) ++ ++#define max(x,y) ({ \ ++ x > y ? x : y; }) ++ ++/** ++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is ++ * also used for setting up a buffer for Circular DDMA. ++ */ ++struct _ddma_sg_buffer_setup { ++#define BS_SG_VAL_DESC_LEN 6 ++ /* The OUT EP address */ ++ uint8_t bOutEndpointAddress; ++ /* The IN EP address */ ++ uint8_t bInEndpointAddress; ++ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ ++ uint8_t bOffset; ++ /* The number of transfer segments (a DMA descriptors per each segment) */ ++ uint8_t bCount; ++ /* Size (in byte) of each transfer segment */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup_hdr { ++#define BS_CONCAT_VAL_HDR_LEN 4 ++ /* The endpoint for which the buffer is to be set up */ ++ uint8_t bEndpointAddress; ++ /* The count of descriptors to be used */ ++ uint8_t bDescCount; ++ /* The total size of the transfer */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup { ++ /* The SG header */ ++ ddma_concat_buffer_setup_hdr_t hdr; ++ ++ /* The XFER sizes pointer (allocated dynamically) */ ++ uint16_t *wTxBytes; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; ++ ++/** Descriptor DMA Alignment Buffer setup structure */ ++struct _ddma_align_buffer_setup { ++#define BS_ALIGN_VAL_HDR_LEN 2 ++ uint8_t bEndpointAddress; ++ uint8_t bAlign; ++} __attribute__ ((packed)); ++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _tx_fifo_size_setup { ++ uint8_t bEndpointAddress; ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _rx_fifo_size_setup { ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; ++ ++/** ++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest ++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer ++ * to the data returned in the data stage of a 3-stage Control Write requests. ++ */ ++struct cfi_usb_ctrlrequest { ++ uint8_t bRequestType; ++ uint8_t bRequest; ++ uint16_t wValue; ++ uint16_t wIndex; ++ uint16_t wLength; ++ uint8_t *data; ++} UPACKED; ++ ++/*---------------------------------------------------------------------------*/ ++ ++/** ++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. ++ * This structure is used to store the buffer setup data for any ++ * enabled endpoint in the PCD. ++ */ ++struct cfi_ep { ++ /* Entry for the list container */ ++ dwc_list_link_t lh; ++ /* Pointer to the active PCD endpoint structure */ ++ struct dwc_otg_pcd_ep *ep; ++ /* The last descriptor in the chain of DMA descriptors of the endpoint */ ++ struct dwc_otg_dma_desc *dma_desc_last; ++ /* The SG feature value */ ++ ddma_sg_buffer_setup_t *bm_sg; ++ /* The Circular feature value */ ++ ddma_sg_buffer_setup_t *bm_circ; ++ /* The Concatenation feature value */ ++ ddma_concat_buffer_setup_t *bm_concat; ++ /* The Alignment feature value */ ++ ddma_align_buffer_setup_t *bm_align; ++ /* XFER length */ ++ uint32_t xfer_len; ++ /* ++ * Count of DMA descriptors currently used. ++ * The total should not exceed the MAX_DMA_DESCS_PER_EP value ++ * defined in the dwc_otg_cil.h ++ */ ++ uint32_t desc_count; ++}; ++typedef struct cfi_ep cfi_ep_t; ++ ++typedef struct cfi_dma_buff { ++#define CFI_IN_BUF_LEN 1024 ++#define CFI_OUT_BUF_LEN 1024 ++ dma_addr_t addr; ++ uint8_t *buf; ++} cfi_dma_buff_t; ++ ++struct cfiobject; ++ ++/** ++ * This is the interface for the CFI operations. ++ * ++ * @param ep_enable Called when any endpoint is enabled and activated. ++ * @param release Called when the CFI object is released and it needs to correctly ++ * deallocate the dynamic memory ++ * @param ctrl_write_complete Called when the data stage of the request is complete ++ */ ++typedef struct cfi_ops { ++ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep); ++ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags); ++ void (*release) (struct cfiobject * cfi); ++ int (*ctrl_write_complete) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd); ++ void (*build_descriptors) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, ++ dwc_otg_pcd_request_t * req); ++} cfi_ops_t; ++ ++struct cfiobject { ++ cfi_ops_t ops; ++ struct dwc_otg_pcd *pcd; ++ struct usb_gadget *gadget; ++ ++ /* Buffers used to send/receive CFI-related request data */ ++ cfi_dma_buff_t buf_in; ++ cfi_dma_buff_t buf_out; ++ ++ /* CFI specific Control request wrapper */ ++ struct cfi_usb_ctrlrequest ctrl_req; ++ ++ /* The list of active EP's in the PCD of type cfi_ep_t */ ++ dwc_list_link_t active_eps; ++ ++ /* This flag shall control the propagation of a specific request ++ * to the gadget's processing routines. ++ * 0 - no gadget handling ++ * 1 - the gadget needs to know about this request (w/o completing a status ++ * phase - just return a 0 to the _setup callback) ++ */ ++ uint8_t need_gadget_att; ++ ++ /* Flag indicating whether the status IN phase needs to be ++ * completed by the PCD ++ */ ++ uint8_t need_status_in_complete; ++}; ++typedef struct cfiobject cfiobject_t; ++ ++#define DUMP_MSG ++ ++#if defined(DUMP_MSG) ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ ++ start = 0; ++ while (length > 0) { ++ num = min(length, 16u); ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_DEBUG("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function returns a pointer to cfi_ep_t object with the addr address. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, ++ uint8_t addr) ++{ ++ struct cfi_ep *pcfiep; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ ++ if (pcfiep->ep->desc->bEndpointAddress == addr) { ++ return pcfiep; ++ } ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function returns a pointer to cfi_ep_t object that matches ++ * the dwc_otg_pcd_ep object. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ struct cfi_ep *pcfiep = NULL; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ if (pcfiep->ep == ep) { ++ return pcfiep; ++ } ++ } ++ return NULL; ++} ++ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); ++ ++#endif /* (__DWC_OTG_CFI_H__) */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil.c b/drivers/usb/host/dwc_otg/dwc_otg_cil.c +new file mode 100644 +index 000000000000..38abd0b1f034 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c +@@ -0,0 +1,7141 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ ++ * $Revision: #191 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * The CIL manages the memory map for the core so that the HCD and PCD ++ * don't have to do this separately. It also handles basic tasks like ++ * reading/writing the registers and data FIFOs in the controller. ++ * Some of the data access functions provide encapsulation of several ++ * operations required to perform a task, such as writing multiple ++ * registers to start a transfer. Finally, the CIL performs basic ++ * services that are not specific to either the host or device modes ++ * of operation. These services include management of the OTG Host ++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A ++ * Diagnostic API is also provided to allow testing of the controller ++ * hardware. ++ * ++ * The Core Interface Layer has the following requirements: ++ * - Provides basic controller operations. ++ * - Minimal use of OS services. ++ * - The OS services used will be abstracted by using inline functions ++ * or macros. ++ * ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); ++ ++/** ++ * This function is called to initialize the DWC_otg CSR data ++ * structures. The register addresses in the device and host ++ * structures are initialized from the base address supplied by the ++ * caller. The calling function must make the OS calls to get the ++ * base address of the DWC_otg controller registers. The core_params ++ * argument holds the parameters that specify how the core should be ++ * configured. ++ * ++ * @param reg_base_addr Base address of DWC_otg core registers ++ * ++ */ ++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) ++{ ++ dwc_otg_core_if_t *core_if = 0; ++ dwc_otg_dev_if_t *dev_if = 0; ++ dwc_otg_host_if_t *host_if = 0; ++ uint8_t *reg_base = (uint8_t *) reg_base_addr; ++ int i = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); ++ ++ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); ++ ++ if (core_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_core_if_t failed\n"); ++ return 0; ++ } ++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; ++ ++ /* ++ * Allocate the Device Mode structures. ++ */ ++ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); ++ ++ if (dev_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ dev_if->dev_global_regs = ++ (dwc_otg_device_global_regs_t *) (reg_base + ++ DWC_DEV_GLOBAL_REG_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) ++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ ++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) ++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", ++ i, &dev_if->in_ep_regs[i]->diepctl); ++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", ++ i, &dev_if->out_ep_regs[i]->doepctl); ++ } ++ ++ dev_if->speed = 0; // unknown ++ ++ core_if->dev_if = dev_if; ++ ++ /* ++ * Allocate the Host Mode structures. ++ */ ++ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); ++ ++ if (host_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_host_if_t failed\n"); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) ++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); ++ ++ host_if->hprt0 = ++ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) ++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + ++ (i * DWC_OTG_CHAN_REGS_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", ++ i, &host_if->hc_regs[i]->hcchar); ++ } ++ ++ host_if->num_host_channels = MAX_EPS_CHANNELS; ++ core_if->host_if = host_if; ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ core_if->data_fifo[i] = ++ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + ++ (i * DWC_OTG_DATA_FIFO_SIZE)); ++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n", ++ i, (unsigned long)core_if->data_fifo[i]); ++ } ++ ++ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); ++ ++ /* Initiate lx_state to L3 disconnected state */ ++ core_if->lx_state = DWC_OTG_L3; ++ /* ++ * Store the contents of the hardware configuration registers here for ++ * easy access later. ++ */ ++ core_if->hwcfg1.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); ++ core_if->hwcfg2.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ core_if->hwcfg3.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); ++ core_if->hwcfg4.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ /* Force host mode to get HPTXFSIZ exact power on value */ ++ { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ core_if->hptxfsiz.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ } ++ ++ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); ++ ++ core_if->hcfg.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ core_if->dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); ++ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); ++ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); ++ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); ++ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", ++ core_if->hwcfg2.b.num_host_chan); ++ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.nonperio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.host_perio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.dev_token_q_depth); ++ ++ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", ++ core_if->hwcfg3.b.dfifo_depth); ++ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", ++ core_if->hwcfg3.b.xfer_size_cntr_width); ++ ++ /* ++ * Set the SRP sucess bit for FS-I2c ++ */ ++ core_if->srp_success = 0; ++ core_if->srp_timer_started = 0; ++ ++ /* ++ * Create new workqueue and init works ++ */ ++ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); ++ if (core_if->wq_otg == 0) { ++ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); ++ ++ DWC_PRINTF("Core Release: %x.%x%x%x\n", ++ (core_if->snpsid >> 12 & 0xF), ++ (core_if->snpsid >> 8 & 0xF), ++ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); ++ ++ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", ++ w_wakeup_detected, core_if); ++ if (core_if->wkp_timer == 0) { ++ DWC_WARN("DWC_TIMER_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ if (dwc_otg_setup_params(core_if)) { ++ DWC_WARN("Error while setting core params\n"); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ ++ /** ADP initialization */ ++ dwc_otg_adp_init(core_if); ++ ++ return core_if; ++} ++ ++/** ++ * This function frees the structures allocated by dwc_otg_cil_init(). ++ * ++ * @param core_if The core interface pointer returned from ++ * dwc_otg_cil_init(). ++ * ++ */ ++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ dctl.b.sftdiscon = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, ++ dctl.d32); ++ } ++ ++ if (core_if->wq_otg) { ++ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ } ++ if (core_if->dev_if) { ++ DWC_FREE(core_if->dev_if); ++ } ++ if (core_if->host_if) { ++ DWC_FREE(core_if->host_if); ++ } ++ ++ /** Remove ADP Stuff */ ++ dwc_otg_adp_remove(core_if); ++ if (core_if->core_params) { ++ DWC_FREE(core_if->core_params); ++ } ++ if (core_if->wkp_timer) { ++ DWC_TIMER_FREE(core_if->wkp_timer); ++ } ++ if (core_if->srp_timer) { ++ DWC_TIMER_FREE(core_if->srp_timer); ++ } ++ DWC_FREE(core_if); ++} ++ ++/** ++ * This function enables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); ++} ++ ++/** ++ * This function disables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++} ++ ++/** ++ * This function initializes the commmon interrupts, used in both ++ * device and host modes. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* ++ * Enable the interrupts in the GINTMSK. ++ */ ++ intr_mask.b.modemismatch = 1; ++ intr_mask.b.otgintr = 1; ++ ++ if (!core_if->dma_enable) { ++ intr_mask.b.rxstsqlvl = 1; ++ } ++ ++ intr_mask.b.conidstschng = 1; ++ intr_mask.b.wkupintr = 1; ++ intr_mask.b.disconnect = 0; ++ intr_mask.b.usbsuspend = 1; ++ intr_mask.b.sessreqintr = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ intr_mask.b.lpmtranrcvd = 1; ++ } ++#endif ++ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Device mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (rem_wakeup) { ++ dwc_udelay(70); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Mask interrupts from gpwrdn */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* ++ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 ++ * indicates restore from remote_wakeup ++ */ ++ restore_essential_regs(core_if, rem_wakeup, 0); ++ ++ /* ++ * Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling ++ */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* ++ * Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); ++ } ++ } ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ pcgcctl.d32 = 0; ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ } ++ ++ /* Restore GUSBCFG and DCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ /* Set Device programming done bit */ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ /* Start Remote Wakeup Signaling */ ++ dctl.d32 = core_if->dr_backup->dctl; ++ dctl.b.rmtwkupsig = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++ ++ dwc_mdelay(2); ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore device global registers */ ++ dwc_otg_restore_dev_regs(core_if, rem_wakeup); ++ ++ if (rem_wakeup) { ++ dwc_mdelay(7); ++ dctl.d32 = 0; ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery completes here\n"); ++ ++ return 1; ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Host mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (!rem_wakeup) { ++ dwc_udelay(50); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Set Restore Essential Regs bit in PCGCCTL register */ ++ restore_essential_regs(core_if, rem_wakeup, 1); ++ ++ /* Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Restore Done interrupt wasn't generated\n"); ++ } ++ } ++ ++ /* Set the flag's value to 0 again after receiving restore done interrupt */ ++ core_if->hibernation_suspend = 0; ++ ++ /* This step is not described in functional spec but if not wait for this ++ * delay, mismatch interrupts occurred because just after restore core is ++ * in Device mode(gintsts.curmode == 0) */ ++ dwc_mdelay(100); ++ ++ /* Clear all pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Restore GUSBCFG and HCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ core_if->hr_backup->hcfg_local); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Start the Resume operation by programming HPRT0 */ ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ DWC_PRINTF("Resume Starts Now\n"); ++ if (!reset) { // Indicates it is Resume Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtres = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ if (!rem_wakeup) ++ hprt0.b.prtres = 0; ++ /* Wait for Resume time and then program HPRT again */ ++ dwc_mdelay(100); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ } else { // Indicates it is Reset Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtrst = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Wait for Reset time and then program HPRT again */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ /* Clear all interrupt status */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtconndet = 1; ++ hprt0.b.prtenchng = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore host global registers */ ++ dwc_otg_restore_host_regs(core_if, reset); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery is complete here\n"); ++ return 0; ++} ++ ++/** Saves some register values into system memory. */ ++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++#endif ++ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); ++ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); ++ gr->gdfifocfg_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ gr->dtxfsiz_local[i] = ++ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", ++ gr->gnptxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", ++ gr->hptxfsiz_local); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); ++#endif ++ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); ++ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); ++ ++ return 0; ++} ++ ++/** Saves GINTMSK register before setting the msk bits. */ ++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ ++ return 0; ++} ++ ++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ if (!dr) { ++ dr = DWC_ALLOC(sizeof(*dr)); ++ if (!dr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->dr_backup = dr; ++ } ++ ++ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dr->daintmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ dr->diepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); ++ dr->doepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ dr->diepctl[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ dr->dieptsiz[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); ++ dr->diepdma[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers==============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); ++ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", ++ dr->daintmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, ++ dr->diepctl[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", ++ i, dr->dieptsiz[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, ++ dr->diepdma[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ ++ hr = core_if->hr_backup; ++ if (!hr) { ++ hr = DWC_ALLOC(sizeof(*hr)); ++ if (!hr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->hr_backup = hr; ++ } ++ ++ hr->hcfg_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hr->haintmsk_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ hr->hcintmsk_local[i] = ++ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); ++ } ++ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); ++ hr->hfir_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers===============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", ++ hr->hcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, ++ hr->hcintmsk_local[i]); ++ } ++ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", ++ hr->hprt0_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", ++ hr->hfir_local); ++ ++ return 0; ++} ++ ++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, ++ gr->gnptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, ++ gr->hptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, ++ gr->gdfifocfg_local); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], ++ gr->dtxfsiz_local[i]); ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, ++ (gr->gahbcfg_local)); ++ return 0; ++} ++ ++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ ++ if (!dr) { ++ return -DWC_E_INVALID; ++ } ++ ++ if (!rem_wakeup) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dr->dctl); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ hr = core_if->hr_backup; ++ ++ if (!hr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); ++ //if (!reset) ++ //{ ++ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); ++ //} ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, ++ hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, ++ hr->hcintmsk_local[i]); ++ } ++ ++ return 0; ++} ++ ++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ ++ /* Restore values for LPM and I2C */ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); ++#endif ++ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); ++ ++ return 0; ++} ++ ++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ /* Restore LPM and I2C registers */ ++ restore_lpm_i2c_regs(core_if); ++ ++ /* Set PCGCCTL to 0 */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); ++ ++ gr = core_if->gr_backup; ++ /* Load restore values for [31:14] bits */ ++ DWC_WRITE_REG32(core_if->pcgcctl, ++ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); ++ ++ /* Umnask global Interrupt in GAHBCFG and restore it */ ++ gahbcfg.d32 = gr->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Unmask restore done interrupt */ ++ gintmsk.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++ ++ /* Restore GUSBCFG and HCFG/DCFG */ ++ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ ++ if (is_host) { ++ hcfg_data_t hcfg = {.d32 = 0 }; ++ hcfg.d32 = core_if->hr_backup->hcfg_local; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits and set EssRegRestored bit */ ++ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } else { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ dcfg.d32 = core_if->dr_backup->dcfg; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ if (!rmode) { ++ pcgcctl.d32 |= 0x208; ++ } ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (!rmode) ++ pcgcctl.d32 |= 0x208; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY ++ * type. ++ */ ++static void init_fslspclksel(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ hcfg_data_t hcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = DWC_HCFG_48_MHZ; ++ } else { ++ /* High speed PHY running at full speed or high speed */ ++ val = DWC_HCFG_30_60_MHZ; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.fslspclksel = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/** ++ * Initializes the DevSpd field of the DCFG register depending on the PHY type ++ * and the enumeration speed of the device. ++ */ ++static void init_devspd(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ dcfg_data_t dcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = 0x3; ++ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ /* High speed PHY running at full speed */ ++ val = 0x1; ++ } else { ++ /* High speed PHY running at high speed */ ++ val = 0x0; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); ++ ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++/** ++ * This function calculates the number of IN EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_in_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; ++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_in_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ num_in_eps = ++ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; ++ } ++ ++ return num_in_eps; ++} ++ ++/** ++ * This function calculates the number of OUT EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_out_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_out_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ return num_out_eps; ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers and ++ * prepares the core for device mode or host mode operation. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++void dwc_otg_core_init(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ gi2cctl_data_t i2cctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", ++ core_if, global_regs); ++ ++ /* Common Initialization */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ /* Program the ULPI External VBUS bit if needed */ ++ usbcfg.b.ulpi_ext_vbus_drv = ++ (core_if->core_params->phy_ulpi_ext_vbus == ++ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; ++ ++ /* Set external TS Dline pulsing */ ++ usbcfg.b.term_sel_dl_pulse = ++ (core_if->core_params->ts_dline == 1) ? 1 : 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset the Controller */ ++ dwc_otg_core_reset(core_if); ++ ++ core_if->adp_enable = core_if->core_params->adp_supp_enable; ++ core_if->power_down = core_if->core_params->power_down; ++ core_if->otg_sts = 0; ++ ++ /* Initialize parameters from Hardware configuration registers. */ ++ dev_if->num_in_eps = calc_num_in_eps(core_if); ++ dev_if->num_out_eps = calc_num_out_eps(core_if); ++ ++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", ++ core_if->hwcfg4.b.num_dev_perio_in_ep); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ dev_if->perio_tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dev_if->tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->tx_fifo_size[i]); ++ } ++ ++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; ++ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->nperio_tx_fifo_size = ++ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; ++ ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", ++ core_if->nperio_tx_fifo_size); ++ ++ /* This programming sequence needs to happen in FS mode before any other ++ * programming occurs */ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* If FS mode with FS PHY */ ++ ++ /* core_init() is now called on every switch so only call the ++ * following for the first time through. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.physel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after a PHY select */ ++ dwc_otg_core_reset(core_if); ++ } ++ ++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also ++ * do this on HNP Dev/Host mode switches (done in dev_init and ++ * host_init). */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ init_fslspclksel(core_if); ++ } else { ++ init_devspd(core_if); ++ } ++ ++ if (core_if->core_params->i2c_enable) { ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); ++ /* Program GUSBCFG.OtgUtmifsSel to I2C */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.otgutmifssel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Program GI2CCTL.I2CEn */ ++ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); ++ i2cctl.b.i2cdevaddr = 1; ++ i2cctl.b.i2cen = 0; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ i2cctl.b.i2cen = 1; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ } ++ ++ } /* endif speed == DWC_SPEED_PARAM_FULL */ ++ else { ++ /* High speed PHY. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ /* HS PHY parameters. These parameters are preserved ++ * during soft reset so only program the first time. Do ++ * a soft reset immediately after setting phyif. */ ++ ++ if (core_if->core_params->phy_type == 2) { ++ /* ULPI interface */ ++ usbcfg.b.ulpi_utmi_sel = 1; ++ usbcfg.b.phyif = 0; ++ usbcfg.b.ddrsel = ++ core_if->core_params->phy_ulpi_ddr; ++ } else if (core_if->core_params->phy_type == 1) { ++ /* UTMI+ interface */ ++ usbcfg.b.ulpi_utmi_sel = 0; ++ if (core_if->core_params->phy_utmi_width == 16) { ++ usbcfg.b.phyif = 1; ++ ++ } else { ++ usbcfg.b.phyif = 0; ++ } ++ } else { ++ DWC_ERROR("FS PHY TYPE\n"); ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ /* Reset after setting the PHY parameters */ ++ dwc_otg_core_reset(core_if); ++ } ++ } ++ ++ if ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) { ++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 1; ++ usbcfg.b.ulpi_clk_sus_m = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } else { ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 0; ++ usbcfg.b.ulpi_clk_sus_m = 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ ++ /* Program the GAHBCFG Register. */ ++ switch (core_if->hwcfg2.b.architecture) { ++ ++ case DWC_SLAVE_ONLY_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); ++ ahbcfg.b.nptxfemplvl_txfemplvl = ++ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ core_if->dma_enable = 0; ++ core_if->dma_desc_enable = 0; ++ break; ++ ++ case DWC_EXT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); ++ { ++ uint8_t brst_sz = core_if->core_params->dma_burst_size; ++ ahbcfg.b.hburstlen = 0; ++ while (brst_sz > 1) { ++ ahbcfg.b.hburstlen++; ++ brst_sz >>= 1; ++ } ++ } ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ case DWC_INT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); ++ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for ++ Host mode ISOC in issue fix - vahrama */ ++ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */ ++ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4; ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ } ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ DWC_PRINTF("Using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINTF("Using Buffer DMA mode\n"); ++ ++ } ++ } else { ++ DWC_PRINTF("Using Slave mode\n"); ++ core_if->dma_desc_enable = 0; ++ } ++ ++ if (core_if->core_params->ahb_single) { ++ ahbcfg.b.ahbsingle = 1; ++ } ++ ++ ahbcfg.b.dmaenable = core_if->dma_enable; ++ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); ++ ++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; ++ ++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; ++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; ++ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", ++ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); ++ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", ++ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); ++ ++ /* ++ * Program the GUSBCFG register. ++ */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ switch (core_if->hwcfg2.b.op_mode) { ++ case DWC_MODE_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_SRP_ONLY_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ /* To enable LPM support set lpm_cap_en bit */ ++ lpmcfg.b.lpm_cap_en = 1; ++ ++ /* Make AppL1Res ACK */ ++ lpmcfg.b.appl_resp = 1; ++ ++ /* Retry 3 times */ ++ lpmcfg.b.retry_count = 3; ++ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, ++ 0, lpmcfg.d32); ++ ++ } ++#endif ++ if (core_if->core_params->ic_usb_cap) { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.b.ic_usb_cap = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, ++ 0, gusbcfg.d32); ++ } ++ { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.otgver = core_if->core_params->otg_ver; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, ++ gotgctl.d32); ++ /* Set OTG version supported */ ++ core_if->otg_ver = core_if->core_params->otg_ver; ++ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", ++ core_if->core_params->otg_ver, core_if->otg_ver); ++ } ++ ++ ++ /* Enable common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Do device or host intialization based on mode during PCD ++ * and HCD initialization */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); ++ core_if->op_state = A_HOST; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); ++ core_if->op_state = B_PERIPHERAL; ++#ifdef DWC_DEVICE_ONLY ++ dwc_otg_core_dev_init(core_if); ++#endif ++ } ++} ++ ++/** ++ * This function enables the Device mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Enable interrupts */ ++ intr_mask.b.usbreset = 1; ++ intr_mask.b.enumdone = 1; ++ /* Disable Disconnect interrupt in Device mode */ ++ intr_mask.b.disconnect = 0; ++ ++ if (!core_if->multiproc_int_enable) { ++ intr_mask.b.inepintr = 1; ++ intr_mask.b.outepintr = 1; ++ } ++ ++ intr_mask.b.erlysuspend = 1; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.epmismatch = 1; ++ } ++ ++ //intr_mask.b.incomplisoout = 1; ++ intr_mask.b.incomplisoin = 1; ++ ++/* Enable the ignore frame number for ISOC xfers - MAS */ ++/* Disable to support high bandwith ISOC transfers - manukz */ ++#if 0 ++#ifdef DWC_UTE_PER_IO ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dctl_data_t dctl1 = {.d32 = 0 }; ++ dctl1.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl1.d32); ++ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl)); ++ } ++ } ++#endif ++#endif ++#ifdef DWC_EN_ISOC ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (core_if->pti_enh_enable) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++ } ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /** @todo NGS: Should this be a module parameter? */ ++#ifdef USE_PERIODIC_EP ++ intr_mask.b.isooutdrop = 1; ++ intr_mask.b.eopframe = 1; ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++#endif ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintmsk)); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * device mode. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize; ++ dthrctl_data_t dthrctl; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ hwcfg3_data_t hwcfg3 = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Device configuration register */ ++ init_devspd(core_if); ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; ++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; ++ /* Enable Device OUT NAK in case of DDMA mode*/ ++ if (core_if->core_params->dev_out_nak) { ++ dcfg.b.endevoutnak = 1; ++ } ++ ++ if (core_if->core_params->cont_on_bna) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.encontonbna = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->dev_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->dev_nperio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->init_rxfsiz = params->dev_rx_fifo_size; ++#endif ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /** Set Periodic Tx FIFO Mask all bits 0 */ ++ core_if->p_tx_msk = 0; ++ ++ /** Set Tx FIFO Mask all bits 0 */ ++ core_if->tx_msk = 0; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /**@todo NGS: Fix Periodic FIFO Sizing! */ ++ /* ++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_perio_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz array run from 0 to 14. ++ */ ++ /** @todo Finish debug of this */ ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ ptxfifosize.b.depth = ++ params->dev_perio_tx_fifo_size[i]; ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ptxfifosize.b.startaddr += ptxfifosize.b.depth; ++ } ++ } else { ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_gnptxfsiz = ++ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ core_if->init_gnptxfsiz = ++ params->dev_nperio_tx_fifo_size; ++#endif ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ txfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ txfifosize.b.depth = ++ params->dev_tx_fifo_size[i]; ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_txfsiz[i] = ++ (DWC_READ_REG32 ++ (&global_regs->dtxfsiz[i]) >> 16); ++ core_if->init_txfsiz[i] = ++ params->dev_tx_fifo_size[i]; ++#endif ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++ txfifosize.b.startaddr += txfifosize.b.depth; ++ } ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); ++ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush the Learning Queue. */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]); ++ } ++ DWC_DEBUGPL(DBG_CILV,"\n"); ++ } ++ ++ /* Clear all pending Device Interrupts */ ++ /** @todo - if the condition needed to be checked ++ * or in any case all pending interrutps should be cleared? ++ */ ++ if (core_if->multiproc_int_enable) { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[i], 0); ++ } ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[i], 0); ++ } ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); ++ } else { ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); ++ } ++ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); ++ } ++ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (depctl.b.epena) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintsts = {.d32 = 0 }; ++ doepint_data_t doepint = {.d32 = 0 }; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[i]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); ++ } ++ ++ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; ++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; ++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; ++ ++ dev_if->rx_thr_length = params->rx_thr_length; ++ dev_if->tx_thr_length = params->tx_thr_length; ++ ++ dev_if->setup_desc_index = 0; ++ ++ dthrctl.d32 = 0; ++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; ++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; ++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; ++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; ++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; ++ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, ++ dthrctl.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", ++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, ++ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, ++ dthrctl.b.rx_thr_len); ++ ++ } ++ ++ dwc_otg_enable_device_interrupts(core_if); ++ ++ { ++ diepmsk_data_t msk = {.d32 = 0 }; ++ msk.b.txfifoundrn = 1; ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[0], msk.d32, msk.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, ++ msk.d32, msk.d32); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ /* Set NAK on Babble */ ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.nakonbble = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.sftdiscon = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++} ++ ++/** ++ * This function enables the Host mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* ++ * Enable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ ++ intr_mask.b.disconnect = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++} ++ ++/** ++ * This function disables the Host Mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); ++ ++ /* ++ * Disable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ intr_mask.b.ptxfempty = 1; ++ intr_mask.b.nptxfempty = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * host mode. ++ * ++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the ++ * request queues. Host channels are reset to ensure that they are ready for ++ * performing transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz, hptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ int i; ++ hcchar_data_t hcchar; ++ hcfg_data_t hcfg; ++ hfir_data_t hfir; ++ dwc_otg_hc_regs_t *hc_regs; ++ int num_channels; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Initialize Host Configuration Register */ ++ init_fslspclksel(core_if); ++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.fslssupp = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ ++ } ++ ++ /* This bit allows dynamic reloading of the HFIR register ++ * during runtime. This bit needs to be programmed during ++ * initial configuration and its value must not be changed ++ * during runtime.*/ ++ if (core_if->core_params->reload_ctl == 1) { ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.hfirrldctrl = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ } ++ ++ if (core_if->core_params->dma_desc_enable) { ++ uint8_t op_mode = core_if->hwcfg2.b.op_mode; ++ if (! ++ (core_if->hwcfg4.b.desc_dma ++ && (core_if->snpsid >= OTG_CORE_REV_2_90a) ++ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { ++ ++ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" ++ "Either core version is below 2.90a or " ++ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" ++ "To run the driver in Buffer DMA host mode set dma_desc_enable " ++ "module parameter to 0.\n"); ++ return; ++ } ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.descdma = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->host_nperio_tx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", ++ params->host_perio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ DWC_WRITE_REG32(&global_regs->grxfsiz, ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->host_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /* Periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ++ if (core_if->en_multiple_tx_fifo ++ && core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* TODO - check this */ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ /* Make sure the FIFOs are flushed. */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ ); ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ ++ if (!core_if->core_params->dma_desc_enable) { ++ /* Flush out any leftover queued requests. */ ++ num_channels = core_if->core_params->host_channels; ++ ++ for (i = 0; i < num_channels; i++) { ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ /* Halt all channels to put them into a known state. */ ++ for (i = 0; i < num_channels; i++) { ++ int count = 0; ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); ++ do { ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (++count > 1000) { ++ DWC_ERROR ++ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", ++ __func__, i, hcchar.d32, &hc_regs->hcchar); ++ break; ++ } ++ dwc_udelay(1); ++ } while (hcchar.b.chen); ++ } ++ } ++ ++ /* Turn on the vbus power. */ ++ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); ++ if (core_if->op_state == A_HOST) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); ++ } ++ } ++ ++ dwc_otg_enable_host_interrupts(core_if); ++} ++ ++/** ++ * Prepares a host channel for transferring packets to/from a specific ++ * endpoint. The HCCHARn register is set up with the characteristics specified ++ * in _hc. Host channel interrupts that may need to be serviced while this ++ * transfer is in progress are enabled. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * @param hc Information needed to initialize the host channel ++ */ ++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcintmsk_data_t hc_intr_mask; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ ++ uint8_t hc_num = hc->hc_num; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; ++ ++ /* Clear old interrupt conditions for this host channel. */ ++ hc_intr_mask.d32 = 0xFFFFFFFF; ++ hc_intr_mask.b.reserved14_31 = 0; ++ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); ++ ++ /* Enable channel interrupts required for this transfer. */ ++ hc_intr_mask.d32 = 0; ++ hc_intr_mask.b.chhltd = 1; ++ if (core_if->dma_enable) { ++ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ ++ if (!core_if->dma_desc_enable) ++ hc_intr_mask.b.ahberr = 1; ++ else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ hc_intr_mask.b.xfercompl = 1; ++ } ++ ++ if (hc->error_state && !hc->do_split && ++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hc_intr_mask.b.ack = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ hc_intr_mask.b.nak = 1; ++ } ++ } ++ } ++ } else { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } else { ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.nyet = 1; ++ if (hc->do_ping) { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ hc_intr_mask.b.nak = 1; ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ hc_intr_mask.b.ack = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.bblerr = 1; ++ } ++ break; ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); ++ ++ /* ++ * Program the HCCHARn register with the endpoint characteristics for ++ * the current transfer. ++ */ ++ hcchar.d32 = 0; ++ hcchar.b.devaddr = hc->dev_addr; ++ hcchar.b.epnum = hc->ep_num; ++ hcchar.b.epdir = hc->ep_is_in; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.eptype = hc->ep_type; ++ hcchar.b.mps = hc->max_packet; ++ ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n", ++ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum); ++ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, " ++ "Max Pkt %d, Multi Cnt %d\n", ++ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype, ++ hcchar.b.mps, hcchar.b.multicnt); ++ ++ /* ++ * Program the HCSPLIT register for SPLITs ++ */ ++ hcsplt.d32 = 0; ++ if (hc->do_split) { ++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ++ hc->hc_num, ++ hc->complete_split ? "CSPLIT" : "SSPLIT"); ++ hcsplt.b.compsplt = hc->complete_split; ++ hcsplt.b.xactpos = hc->xact_pos; ++ hcsplt.b.hubaddr = hc->hub_addr; ++ hcsplt.b.prtaddr = hc->port_addr; ++ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split); ++ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos); ++ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in); ++ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len); ++ } ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); ++ ++} ++ ++/** ++ * Attempts to halt a host channel. This function should only be called in ++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under ++ * normal circumstances in DMA mode, the controller halts the channel when the ++ * transfer is complete or a condition occurs that requires application ++ * intervention. ++ * ++ * In slave mode, checks for a free request queue entry, then sets the Channel ++ * Enable and Channel Disable bits of the Host Channel Characteristics ++ * register of the specified channel to intiate the halt. If there is no free ++ * request queue entry, sets only the Channel Disable bit of the HCCHARn ++ * register to flush requests for this channel. In the latter case, sets a ++ * flag to indicate that the host channel needs to be halted when a request ++ * queue slot is open. ++ * ++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the ++ * HCCHARn register. The controller ensures there is space in the request ++ * queue before submitting the halt request. ++ * ++ * Some time may elapse before the core flushes any posted requests for this ++ * host channel and halts. The Channel Halted interrupt handler completes the ++ * deactivation of the host channel. ++ * ++ * @param core_if Controller register interface. ++ * @param hc Host channel to halt. ++ * @param halt_status Reason for halting the channel. ++ */ ++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) ++{ ++ gnptxsts_data_t nptxsts; ++ hptxsts_data_t hptxsts; ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_core_global_regs_t *global_regs; ++ dwc_otg_host_global_regs_t *host_global_regs; ++ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ global_regs = core_if->core_global_regs; ++ host_global_regs = core_if->host_if->host_global_regs; ++ ++ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), ++ "halt_status = %d\n", halt_status); ++ ++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Disable all channel interrupts except Ch Halted. The QTD ++ * and QH state associated with this transfer has been cleared ++ * (in the case of URB_DEQUEUE), so the channel needs to be ++ * shut down carefully to prevent crashes. ++ */ ++ hcintmsk_data_t hcintmsk; ++ hcintmsk.d32 = 0; ++ hcintmsk.b.chhltd = 1; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); ++ ++ /* ++ * Make sure no other interrupts besides halt are currently ++ * pending. Handling another interrupt could cause a crash due ++ * to the QTD and QH state. ++ */ ++ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); ++ ++ /* ++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR ++ * even if the channel was already halted for some other ++ * reason. ++ */ ++ hc->halt_status = halt_status; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen == 0) { ++ /* ++ * The channel is either already halted or it hasn't ++ * started yet. In DMA mode, the transfer may halt if ++ * it finishes normally or a condition occurs that ++ * requires driver intervention. Don't want to halt ++ * the channel again. In either Slave or DMA mode, ++ * it's possible that the transfer has been assigned ++ * to a channel, but not started yet when an URB is ++ * dequeued. Don't want to halt a channel that hasn't ++ * started yet. ++ */ ++ return; ++ } ++ } ++ if (hc->halt_pending) { ++ /* ++ * A halt has already been issued for this channel. This might ++ * happen when a transfer is aborted by a higher level in ++ * the stack. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", ++ __func__, hc->hc_num); ++ ++#endif ++ return; ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* No need to set the bit in DDMA for disabling the channel */ ++ //TODO check it everywhere channel is disabled ++ if (!core_if->core_params->dma_desc_enable) ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ ++ if (!core_if->dma_enable) { ++ /* Check for space in the request queue to issue the halt. */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (nptxsts.b.nptxqspcavail == 0) { ++ hcchar.b.chen = 0; ++ } ++ } else { ++ hptxsts.d32 = ++ DWC_READ_REG32(&host_global_regs->hptxsts); ++ if ((hptxsts.b.ptxqspcavail == 0) ++ || (core_if->queuing_high_bandwidth)) { ++ hcchar.b.chen = 0; ++ } ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->halt_status = halt_status; ++ ++ if (hcchar.b.chen) { ++ hc->halt_pending = 1; ++ hc->halt_on_queue = 0; ++ } else { ++ hc->halt_on_queue = 1; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); ++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); ++ ++ return; ++} ++ ++/** ++ * Clears the transfer state for a host channel. This function is normally ++ * called after a transfer is done and the host channel is being released. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to clean up. ++ */ ++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs; ++ ++ hc->xfer_started = 0; ++ ++ /* ++ * Clear channel interrupt enables and any unhandled channel interrupt ++ * conditions. ++ */ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); ++ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); ++#ifdef DEBUG ++ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); ++#endif ++} ++ ++/** ++ * Sets the channel property that indicates in which frame a periodic transfer ++ * should occur. This is always set to the _next_ frame. This function has no ++ * effect on non-periodic transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to set up and its properties. ++ * @param hcchar Current value of the HCCHAR register for the specified host ++ * channel. ++ */ ++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, hcchar_data_t * hcchar) ++{ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); ++ ++ /* 1 if _next_ frame is odd, 0 if it's even */ ++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++#ifdef DEBUG ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split ++ && !hc->complete_split) { ++ switch (hfnum.b.frnum & 0x7) { ++ case 7: ++ core_if->hfnum_7_samples++; ++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; ++ break; ++ case 0: ++ core_if->hfnum_0_samples++; ++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; ++ break; ++ default: ++ core_if->hfnum_other_samples++; ++ core_if->hfnum_other_frrem_accum += ++ hfnum.b.frrem; ++ break; ++ } ++ } ++#endif ++ } ++} ++ ++#ifdef DEBUG ++void hc_xfer_timeout(void *ptr) ++{ ++ hc_xfer_info_t *xfer_info = NULL; ++ int hc_num = 0; ++ ++ if (ptr) ++ xfer_info = (hc_xfer_info_t *) ptr; ++ ++ if (!xfer_info->hc) { ++ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); ++ return; ++ } ++ ++ hc_num = xfer_info->hc->hc_num; ++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); ++ DWC_WARN(" start_hcchar_val 0x%08x\n", ++ xfer_info->core_if->start_hcchar_val[hc_num]); ++} ++#endif ++ ++void ep_xfer_timeout(void *ptr) ++{ ++ ep_xfer_info_t *xfer_info = NULL; ++ int ep_num = 0; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (ptr) ++ xfer_info = (ep_xfer_info_t *) ptr; ++ ++ if (!xfer_info->ep) { ++ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep); ++ return; ++ } ++ ++ ep_num = xfer_info->ep->num; ++ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num); ++ /* Put the sate to 2 as it was time outed */ ++ xfer_info->state = 2; ++ ++ dctl.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts); ++ gintmsk.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk); ++ ++ if (!gintmsk.b.goutnakeff) { ++ /* Unmask it */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk, ++ gintmsk.d32); ++ ++ } ++ ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++} ++ ++void set_pid_isoc(dwc_hc_t * hc) ++{ ++ /* Set up the initial PID for the transfer. */ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ if (hc->ep_is_in) { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else if (hc->multi_count == 2) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; ++ } ++ } else { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; ++ } ++ } ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel and ++ * starts the transfer. May be called in either Slave mode or DMA mode. In ++ * Slave mode, the caller must ensure that there is sufficient space in the ++ * request queue and Tx Data FIFO. ++ * ++ * For an OUT transfer in Slave mode, it loads a data packet into the ++ * appropriate FIFO. If necessary, additional data packets will be loaded in ++ * the Host ISR. ++ * ++ * For an IN transfer in Slave mode, a data packet is requested. The data ++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, ++ * additional data packets are requested in the Host ISR. ++ * ++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ ++ * register along with a packet count of 1 and the channel is enabled. This ++ * causes a single PING transaction to occur. Other fields in HCTSIZ are ++ * simply set to 0 since no data transfer occurs in this case. ++ * ++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with ++ * all the information required to perform the subsequent data transfer. In ++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the ++ * controller performs the entire PING protocol, then starts the data ++ * transfer. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. The xfer_len ++ * value may be reduced to accommodate the max widths of the XferSize and ++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed ++ * to reflect the final xfer_len value. ++ */ ++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ uint16_t num_packets; ++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; ++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) { ++ if (!core_if->dma_enable) { ++ dwc_otg_hc_do_ping(core_if, hc); ++ hc->xfer_started = 1; ++ return; ++ } else { ++ hctsiz.b.dopng = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ num_packets = 1; ++ ++ if (hc->complete_split && !hc->ep_is_in) { ++ /* For CSPLIT OUT Transfer, set the size to 0 so the ++ * core doesn't expect any data written to the FIFO */ ++ hc->xfer_len = 0; ++ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } else { ++ /* ++ * Ensure that the transfer length and packet count will fit ++ * in the widths allocated for them in the HCTSIZn register. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure the transfer size is no larger than one ++ * (micro)frame's worth of data. (A check was done ++ * when the periodic transfer was accepted to ensure ++ * that a (micro)frame's worth of data can be ++ * programmed into a channel.) ++ */ ++ uint32_t max_periodic_len = ++ hc->multi_count * hc->max_packet; ++ if (hc->xfer_len > max_periodic_len) { ++ hc->xfer_len = max_periodic_len; ++ } else { ++ } ++ } else if (hc->xfer_len > max_hc_xfer_size) { ++ /* Make sure that xfer_len is a multiple of max packet size. */ ++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; ++ } ++ ++ if (hc->xfer_len > 0) { ++ num_packets = ++ (hc->xfer_len + hc->max_packet - ++ 1) / hc->max_packet; ++ if (num_packets > max_hc_pkt_count) { ++ num_packets = max_hc_pkt_count; ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ ++ if (hc->ep_is_in) { ++ /* Always program an integral # of max packets for IN transfers. */ ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure that the multi_count field matches the ++ * actual transfer length. ++ */ ++ hc->multi_count = num_packets; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ ++ hc->start_pkt_count = num_packets; ++ hctsiz.b.pktcnt = num_packets; ++ hctsiz.b.pid = hc->data_pid_start; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ ++ if (core_if->dma_enable) { ++ dwc_dma_t dma_addr; ++ if (hc->align_buff) { ++ dma_addr = hc->align_buff; ++ } else { ++ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); ++ } ++ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); ++ } ++ ++ /* Start the split */ ++ if (hc->do_split) { ++ hcsplt_data_t hcsplt; ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hcsplt.b.spltena = 1; ++ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ } ++#ifdef DEBUG ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel ++ * and starts the transfer in Descriptor DMA mode. ++ * ++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. ++ * Sets PID and NTD values. For periodic transfers ++ * initializes SCHED_INFO field with micro-frame bitmap. ++ * ++ * Initializes HCDMA register with descriptor list address and CTD value ++ * then starts the transfer via enabling the channel. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. ++ */ ++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) ++ hctsiz.b_ddma.dopng = 1; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ ++ hctsiz.b_ddma.pid = hc->data_pid_start; ++ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ ++ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); ++ ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcdma.d32 = 0; ++ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; ++ ++ /* Always start from first descriptor. */ ++ hcdma.b.ctd = 0; ++ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++#ifdef DEBUG ++ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) ++ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { ++ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++ ++} ++ ++/** ++ * This function continues a data transfer that was started by previous call ++ * to dwc_otg_hc_start_transfer. The caller must ensure there is ++ * sufficient space in the request queue and Tx Data FIFO. This function ++ * should only be called in Slave mode. In DMA mode, the controller acts ++ * autonomously to complete transfers programmed to a host channel. ++ * ++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO ++ * if there is any data remaining to be queued. For an IN transfer, another ++ * data packet is always requested. For the SETUP phase of a control transfer, ++ * this function does nothing. ++ * ++ * @return 1 if a new request is queued, 0 if no more requests are required ++ * for this transfer. ++ */ ++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ if (hc->do_split) { ++ /* SPLITs always queue just once per channel */ ++ return 0; ++ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ /* SETUPs are queued only once since they can't be NAKed. */ ++ return 0; ++ } else if (hc->ep_is_in) { ++ /* ++ * Always queue another request for other IN transfers. If ++ * back-to-back INs are issued and NAKs are received for both, ++ * the driver may still be processing the first NAK when the ++ * second NAK is received. When the interrupt handler clears ++ * the NAK interrupt for the first NAK, the second NAK will ++ * not be seen. So we can't depend on the NAK interrupt ++ * handler to requeue a NAKed request. Instead, IN requests ++ * are issued each time this function is called. When the ++ * transfer completes, the extra requests for the channel will ++ * be flushed. ++ */ ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs = ++ core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", ++ hcchar.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ hc->requests++; ++ return 1; ++ } else { ++ /* OUT transfers. */ ++ if (hc->xfer_count < hc->xfer_len) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ } ++ ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ hc->requests++; ++ return 1; ++ } else { ++ return 0; ++ } ++ } ++} ++ ++/** ++ * Starts a PING transfer. This function should only be called in Slave mode. ++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. ++ */ ++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ hctsiz.d32 = 0; ++ hctsiz.b.dopng = 1; ++ hctsiz.b.pktcnt = 1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++} ++ ++/* ++ * This function writes a packet into the Tx FIFO associated with the Host ++ * Channel. For a channel associated with a non-periodic EP, the non-periodic ++ * Tx FIFO is written. For a channel associated with a periodic EP, the ++ * periodic Tx FIFO is written. This function should only be called in Slave ++ * mode. ++ * ++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by ++ * then number of bytes written to the Tx FIFO. ++ */ ++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t i; ++ uint32_t remaining_count; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ ++ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); ++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; ++ ++ remaining_count = hc->xfer_len - hc->xfer_count; ++ if (remaining_count > hc->max_packet) { ++ byte_count = hc->max_packet; ++ } else { ++ byte_count = remaining_count; ++ } ++ ++ dword_count = (byte_count + 3) / 4; ++ ++ if ((((unsigned long)data_buff) & 0x3) == 0) { ++ /* xfer_buff is DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(data_fifo, *data_buff); ++ } ++ } else { ++ /* xfer_buff is not DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ uint32_t data; ++ data = ++ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << ++ 16 | data_buff[3] << 24); ++ DWC_WRITE_REG32(data_fifo, data); ++ } ++ } ++ ++ hc->xfer_count += byte_count; ++ hc->xfer_buff += byte_count; ++} ++ ++/** ++ * Gets the current USB frame number. This is the frame number from the last ++ * SOF packet. ++ */ ++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /* read current frame/microframe number from DSTS register */ ++ return dsts.b.soffn; ++} ++ ++/** ++ * Calculates and gets the frame Interval value of HFIR register according PHY ++ * type and speed.The application can modify a value of HFIR register only after ++ * the Port Enable bit of the Host Port Control and Status register ++ * (HPRT.PrtEnaPort) has been set. ++*/ ++ ++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ hwcfg2_data_t hwcfg2; ++ hprt0_data_t hprt0; ++ int clock = 60; // default value ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) ++ clock = 48; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 30; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 48; ++ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) ++ clock = 48; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) ++ clock = 48; ++ if (hprt0.b.prtspd == 0) ++ /* High speed case */ ++ return 125 * clock - 1; ++ else ++ /* FS/LS case */ ++ return 1000 * clock - 1; ++} ++ ++/** ++ * This function reads a setup packet from the Rx FIFO into the destination ++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) ++ * Interrupt routine when a SETUP packet has been received in Slave mode. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for packet data. ++ */ ++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) ++{ ++ device_grxsts_data_t status; ++ /* Get the 8 bytes of a setup transaction data */ ++ ++ /* Pop 2 DWORDS off the receive data FIFO into memory */ ++ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); ++ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxstsp); ++ DWC_DEBUGPL(DBG_ANY, ++ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, status.b.pktsts, ++ status.b.fn, status.b.fn); ++ } ++} ++ ++/** ++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 ++ * IN for transmitting packets. It is normally called when the ++ * "Enumeration Done" interrupt occurs. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dsts_data_t dsts; ++ depctl_data_t diepctl; ++ depctl_data_t doepctl; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ ep->stp_rollover = 0; ++ /* Read the Device Status and Endpoint 0 Control registers */ ++ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ ++ /* Set the MPS of the IN EP based on the enumeration speed */ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_64; ++ break; ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_8; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Enable OUT EP for receive */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.epena = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++ dctl.b.cgnpinnak = 1; ++ ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); ++ ++} ++ ++/** ++ * This function activates an EP. The Device EP control register for ++ * the EP is configured as defined in the ep structure. Note: This ++ * function is not used for EP0. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to activate. ++ */ ++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t depctl; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ /* If the EP is already active don't change the EP Control ++ * register. */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (!depctl.b.usbactep) { ++ depctl.b.mps = ep->maxpacket; ++ depctl.b.eptype = ep->type; ++ depctl.b.txfnum = ep->tx_fifo_num; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl.b.setd0pid = 1; // ??? ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ depctl.b.usbactep = 1; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq) ++ break; ++ } ++ core_if->nextep_seq[i] = ep->num; ++ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq; ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt++; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", ++ core_if->nextep_seq[i]); ++ } ++ ++ } ++ ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); ++ } ++ ++ /* Enable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ if (ep->is_in == 1) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ diepmsk.b.txfifoundrn = 1; //????? ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ diepmsk.b.nak = 1; ++ } ++ ++ ++ ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], diepmsk.d32); ++ ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ doepmsk.b.outtknepdis = 1; ++ ++/* ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.bna = 1; ++ } ++*/ ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], doepmsk.d32); ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, ++ 0, daintmsk.d32); ++ } else { ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (ep->is_in) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.nak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32); ++ } ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, ++ 0, daintmsk.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); ++ ++ ep->stall_clear_flag = 0; ++ ++ return; ++} ++ ++/** ++ * This function deactivates an EP. This is done by clearing the USB Active ++ * EP bit in the Device EP control register. Note: This function is not used ++ * for EP0. EP0 cannot be deactivated. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to deactivate. ++ */ ++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i = 0; ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.usbactep = 0; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == ep->num) ++ break; ++ } ++ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num]; ++ if (core_if->first_in_nextep_seq == ep->num) ++ core_if->first_in_nextep_seq = i; ++ core_if->nextep_seq[ep->num] = 0xff; ++ depctl.b.nextep = 0; ++ dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt--; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (ep->is_in == 1) ++ depctl.b.txfnum = 0; ++ ++ if (core_if->dma_desc_enable) ++ depctl.b.epdis = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC ++ && depctl.b.epena) { ++ depctl_data_t depctl = {.d32 = 0}; ++ if (ep->is_in) { ++ diepint_data_t diepint = {.d32 = 0}; ++ ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ } else { ++ dctl_data_t dctl = {.d32 = 0}; ++ gintmsk_data_t gintsts = {.d32 = 0}; ++ doepint_data_t doepint = {.d32 = 0}; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32); ++ do ++ { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ } ++ ++ /* Disable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32, 0); ++ ++ if (ep->is_in == 1) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], 0); ++ } else { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], 0); ++ } ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32, 0); ++ } ++ ++} ++ ++/** ++ * This function initializes dma descriptor chain. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t offset; ++ uint32_t xfer_est; ++ int i; ++ unsigned maxxfer_local, total_len; ++ ++ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && ++ (ep->maxpacket%4)) { ++ maxxfer_local = ep->maxpacket; ++ total_len = ep->xfer_len; ++ } else { ++ maxxfer_local = ep->maxxfer; ++ total_len = ep->total_len; ++ } ++ ++ ep->desc_cnt = (total_len / maxxfer_local) + ++ ((total_len % maxxfer_local) ? 1 : 0); ++ ++ if (!ep->desc_cnt) ++ ep->desc_cnt = 1; ++ ++ if (ep->desc_cnt > MAX_DMA_DESC_CNT) ++ ep->desc_cnt = MAX_DMA_DESC_CNT; ++ ++ dma_desc = ep->desc_addr; ++ if (maxxfer_local == ep->maxpacket) { ++ if ((total_len % maxxfer_local) && ++ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) { ++ xfer_est = (ep->desc_cnt - 1) * maxxfer_local + ++ (total_len % maxxfer_local); ++ } else ++ xfer_est = ep->desc_cnt * maxxfer_local; ++ } else ++ xfer_est = total_len; ++ offset = 0; ++ for (i = 0; i < ep->desc_cnt; ++i) { ++ /** DMA Descriptor Setup */ ++ if (xfer_est > maxxfer_local) { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 0; ++ dma_desc->status.b.ioc = 0; ++ dma_desc->status.b.sp = 0; ++ dma_desc->status.b.bytes = maxxfer_local; ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ xfer_est -= maxxfer_local; ++ offset += maxxfer_local; ++ } else { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ if (ep->is_in) { ++ dma_desc->status.b.sp = ++ (xfer_est % ++ ep->maxpacket) ? 1 : ((ep-> ++ sent_zlp) ? 1 : 0); ++ dma_desc->status.b.bytes = xfer_est; ++ } else { ++ if (maxxfer_local == ep->maxpacket) ++ dma_desc->status.b.bytes = xfer_est; ++ else ++ dma_desc->status.b.bytes = ++ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); ++ } ++ ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ } ++ dma_desc++; ++ } ++} ++/** ++ * This function is called when to write ISOC data into appropriate dedicated ++ * periodic FIFO. ++ */ ++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ int epnum = dwc_ep->num; ++ int dwords; ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, dwc_ep, 0); ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, ++ ep->total_len); ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) { ++#ifdef DEBUG ++ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ? ++ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ ++ ++ /* Zero Length Packet? */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count - 1 + ++ ep->maxpacket) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ } ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ } ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ init_dma_desc_chain(core_if, ep); ++ /** DIEPDMAn Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32 ++ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ ++ } ++ } ++ } else { ++ write_isoc_tx_fifo(core_if, ep); ++ } ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ if (!core_if->dma_desc_enable) { ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len ++ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ } ++ ++ /* Program the transfer size and packet count as follows: ++ * ++ * pktcnt = N ++ * xfersize = N * maxpacket ++ */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ } ++ if (!core_if->dma_desc_enable) { ++ ep->xfer_len = ++ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; ++ } ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", ++ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ /** This is used for interrupt out transfers*/ ++ if (!ep->xfer_len) ++ ep->xfer_len = ep->total_len; ++ init_dma_desc_chain(core_if, ep); ++ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ deptsiz.b.pktcnt = (ep->total_len + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = ep->total_len; ++ /* Remember initial value of doeptsiz */ ++ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32; ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ } ++ } ++ /** DOEPDMAn Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", ++ DWC_READ_REG32(&out_regs->doepctl), ++ DWC_READ_REG32(&out_regs->doeptsiz)); ++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ daintmsk), ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gintmsk)); ++ ++ /* Timer is scheduling only for out bulk transfers for ++ * "Device DDMA OUT NAK Enhancement" feature to inform user ++ * about received data payload in case of timeout ++ */ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ core_if->ep_xfer_info[ep->num].core_if = core_if; ++ core_if->ep_xfer_info[ep->num].ep = ep; ++ core_if->ep_xfer_info[ep->num].state = 1; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000); ++ } ++ } ++ } ++} ++ ++/** ++ * This function setup a zero length transfer in Buffer DMA and ++ * Slave modes for usb requests with zero field set ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_PRINTF("zero length transfer is called\n"); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for EP0 and starts ++ * the transfer. For an IN transfer, the packets will be loaded into ++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are ++ * unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p \n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ ep->total_len = ep->xfer_len; ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ if (depctl.b.epena) ++ return; ++ } ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ /* If dedicated FIFO every time flush fifo before enable ep*/ ++ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 ++ && !core_if->dma_enable) { ++#ifdef DEBUG ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", ++ DWC_READ_REG32(&in_regs->diepctl)); ++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", ++ deptsiz.d32, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", ++ gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Zero Length Packet? */ ++ if (ep->xfer_len == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ if (ep->xfer_len > ep->maxpacket) { ++ ep->xfer_len = ep->maxpacket; ++ deptsiz.b.xfersize = ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = ep->xfer_len; ++ } ++ deptsiz.b.pktcnt = 1; ++ ++ } ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if-> ++ dev_if->dma_in_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count as follows: ++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) ++ * pktcnt = N */ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ deptsiz.b.supcnt = 3; ++ ++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.mtrf = 0; ++ dma_desc->status.b.sr = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if-> ++ dma_out_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); ++ } ++} ++ ++/** ++ * This function continues control IN transfers started by ++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a ++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one ++ * bit for the packet count. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ gnptxsts_data_t tx_status = {.d32 = 0 }; ++ ++ tx_status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ /** @todo Should there be check for room in the Tx ++ * Status Queue. If not remove the code above this comment. */ ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.xfersize = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ deptsiz.b.pktcnt = 1; ++ if (core_if->dma_enable == 0) { ++ ep->xfer_len += deptsiz.b.xfersize; ++ } else { ++ ep->xfer_len = deptsiz.b.xfersize; ++ } ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } else { ++ ep->xfer_len = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if->dev_if->dma_in_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* First clear it from GINTSTS */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if->dma_out_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++#ifdef DEBUG ++void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ start = 0; ++ while (length > 0) { ++ num = length < 16u ? length : 16u; ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_PRINTF("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function writes a packet into the Tx FIFO associated with the ++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For ++ * periodic EPs the periodic Tx FIFO associated with the EP is written ++ * with all packets for the next micro-frame. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to write packet for. ++ * @param dma Indicates if DMA is being used. ++ */ ++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, ++ int dma) ++{ ++ /** ++ * The buffer is padded to DWORD on a per packet basis in ++ * slave/dma mode if the MPS is not DWORD aligned. The last ++ * packet, if short, is also padded to a multiple of DWORD. ++ * ++ * ep->xfer_buff always starts DWORD aligned in memory and is a ++ * multiple of DWORD in length ++ * ++ * ep->xfer_len can be any number of bytes ++ * ++ * ep->xfer_count is a multiple of ep->maxpacket until the last ++ * packet ++ * ++ * FIFO access is DWORD */ ++ ++ uint32_t i; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ uint32_t *fifo; ++ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ++ ep); ++ if (ep->xfer_count >= ep->xfer_len) { ++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); ++ return; ++ } ++ ++ /* Find the byte length of the packet either short packet or MPS */ ++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { ++ byte_count = ep->xfer_len - ep->xfer_count; ++ } else { ++ byte_count = ep->maxpacket; ++ } ++ ++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS ++ * is not a multiple of DWORD */ ++ dword_count = (byte_count + 3) / 4; ++ ++#ifdef VERBOSE ++ dump_msg(ep->xfer_buff, byte_count); ++#endif ++ ++ /**@todo NGS Where are the Periodic Tx FIFO addresses ++ * intialized? What should this be? */ ++ ++ fifo = core_if->data_fifo[ep->num]; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", ++ fifo, data_buff, *data_buff, byte_count); ++ ++ if (!dma) { ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(fifo, *data_buff); ++ } ++ } ++ ++ ep->xfer_count += byte_count; ++ ep->xfer_buff += byte_count; ++ ep->dma_addr += byte_count; ++} ++ ++/** ++ * Set the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to set the stall on. ++ */ ++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the stall bit */ ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ ++ return; ++} ++ ++/** ++ * Clear the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to clear stall from. ++ */ ++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ } ++ ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* clear the stall bits */ ++ depctl.b.stall = 0; ++ ++ /* ++ * USB Spec 9.4.5: For endpoints using data toggle, regardless ++ * of whether an endpoint has the Halt feature set, a ++ * ClearFeature(ENDPOINT_HALT) request always results in the ++ * data toggle being reinitialized to DATA0. ++ */ ++ if (ep->type == DWC_OTG_EP_TYPE_INTR || ++ ep->type == DWC_OTG_EP_TYPE_BULK) { ++ depctl.b.setd0pid = 1; /* DATA0 */ ++ } ++ ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ return; ++} ++ ++/** ++ * This function reads a packet from the Rx FIFO into the destination ++ * buffer. To read SETUP data use dwc_otg_read_setup_packet. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for the packet. ++ * @param bytes Number of bytes to copy to the destination. ++ */ ++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes) ++{ ++ int i; ++ int word_count = (bytes + 3) / 4; ++ ++ volatile uint32_t *fifo = core_if->data_fifo[0]; ++ uint32_t *data_buff = (uint32_t *) dest; ++ ++ /** ++ * @todo Account for the case where _dest is not dword aligned. This ++ * requires reading data from the FIFO into a uint32_t temp buffer, ++ * then moving it into the data buffer. ++ */ ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, ++ core_if, dest, bytes); ++ ++ for (i = 0; i < word_count; i++, data_buff++) { ++ *data_buff = DWC_READ_REG32(fifo); ++ } ++ ++ return; ++} ++ ++/** ++ * This functions reads the device registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Device Global Registers\n"); ++ addr = &core_if->dev_if->dev_global_regs->dcfg; ++ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dctl; ++ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dsts; ++ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->diepmsk; ++ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->doepmsk; ++ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daint; ++ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daintmsk; ++ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dtknqr1; ++ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr2; ++ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbusdis; ++ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; ++ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; ++ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.multi_proc_int) { ++ ++ addr = &core_if->dev_if->dev_global_regs->deachint; ++ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->deachintmsk; ++ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->diepeachintmsk[i]; ++ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->doepeachintmsk[i]; ++ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_PRINTF("Device IN EP %d Registers\n", i); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; ++ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepint; ++ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; ++ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; ++ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; ++ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; ++ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_PRINTF("Device OUT EP %d Registers\n", i); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; ++ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepint; ++ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; ++ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; ++ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; ++ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++} ++ ++/** ++ * This functions reads the SPRAM and prints its content ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) ++{ ++ volatile uint8_t *addr, *start_addr, *end_addr; ++ ++ DWC_PRINTF("SPRAM Data:\n"); ++ start_addr = (void *)core_if->core_global_regs; ++ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); ++ start_addr += 0x00028000; ++ end_addr = (void *)core_if->core_global_regs; ++ end_addr += 0x000280e0; ++ ++ for (addr = start_addr; addr < end_addr; addr += 16) { ++ DWC_PRINTF ++ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", ++ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], ++ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], ++ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] ++ ); ++ } ++ ++ return; ++} ++ ++/** ++ * This function reads the host registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Host Global Registers\n"); ++ addr = &core_if->host_if->host_global_regs->hcfg; ++ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfir; ++ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfnum; ++ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hptxsts; ++ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haint; ++ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haintmsk; ++ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->host_global_regs->hflbaddr; ++ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = core_if->host_if->hprt0; ++ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_PRINTF("Host Channel %d Specific Registers\n", i); ++ addr = &core_if->host_if->hc_regs[i]->hcchar; ++ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcsplt; ++ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcint; ++ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcintmsk; ++ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hctsiz; ++ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcdma; ++ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->hc_regs[i]->hcdmab; ++ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++ return; ++} ++ ++/** ++ * This function reads the core global registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i, ep_num; ++ volatile uint32_t *addr; ++ char *txfsiz; ++ ++ DWC_PRINTF("Core Global Registers\n"); ++ addr = &core_if->core_global_regs->gotgctl; ++ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gotgint; ++ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gahbcfg; ++ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gusbcfg; ++ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grstctl; ++ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintsts; ++ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintmsk; ++ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxstsr; ++ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxfsiz; ++ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxfsiz; ++ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxsts; ++ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gi2cctl; ++ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpvndctl; ++ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ggpio; ++ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->guid; ++ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gsnpsid; ++ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg1; ++ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg2; ++ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg3; ++ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg4; ++ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->glpmcfg; ++ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpwrdn; ++ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gdfifocfg; ++ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->adpctl; ++ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ dwc_otg_adp_read_reg(core_if)); ++ addr = &core_if->core_global_regs->hptxfsiz; ++ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; ++ txfsiz = "DPTXFSIZ"; ++ } else { ++ ep_num = core_if->hwcfg4.b.num_in_eps; ++ txfsiz = "DIENPTXF"; ++ } ++ for (i = 0; i < ep_num; i++) { ++ addr = &core_if->core_global_regs->dtxfsiz[i]; ++ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ addr = core_if->pcgcctl; ++ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++} ++ ++/** ++ * Flush a Tx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param num Tx FIFO to flush. ++ */ ++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); ++ ++ greset.b.txfflsh = 1; ++ greset.b.txfnum = num; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", ++ __func__, greset.d32, ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.txfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Flush Rx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); ++ /* ++ * ++ */ ++ greset.b.rxfflsh = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.rxfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Do core a soft reset of the core. Be careful with this because it ++ * resets all the internal state machines of the core. ++ */ ++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); ++ /* Wait for AHB master IDLE state. */ ++ do { ++ dwc_udelay(10); ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 100000) { ++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ return; ++ } ++ } ++ while (greset.b.ahbidle == 0); ++ ++ /* Core Soft Reset */ ++ count = 0; ++ greset.b.csftrst = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", ++ __func__, greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } ++ while (greset.b.csftrst == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_mdelay(100); ++} ++ ++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); ++} ++ ++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); ++} ++ ++/** ++ * Register HCD callbacks. The callbacks are used to start and stop ++ * the HCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the HCD callback structure. ++ * @param p pointer to be passed to callback function (usb_hcd*). ++ */ ++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->hcd_cb = cb; ++ cb->p = p; ++} ++ ++/** ++ * Register PCD callbacks. The callbacks are used to start and stop ++ * the PCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the PCD callback structure. ++ * @param p pointer to be passed to callback function (pcd*). ++ */ ++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->pcd_cb = cb; ++ cb->p = p; ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function writes isoc data per 1 (micro)frame into tx fifo ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ uint32_t dwords; ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ++ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; ++ ++ len = ep->xfer_len - ep->xfer_count; ++ ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, ep, 0); ++ ++ len = ep->xfer_len - ep->xfer_count; ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, ++ txstatus.d32); ++ } ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ep->cur_pkt_addr; ++ ep->dma_addr = ep->cur_pkt_dma_addr; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ } ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); ++ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if-> ++ out_ep_regs[ep->num]->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } ++ ++ /** Enable endpoint, clear nak */ ++ ++ depctl.d32 = 0; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ep->next_frame = dsts.b.soffn + ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } else { ++ ep->next_frame += ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ if (ep->is_in && core_if->dma_enable == 0) { ++ write_isoc_frame_data(core_if, ep); ++ } ++ ++} ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_set_uninitialized(int32_t * p, int size) ++{ ++ int i; ++ for (i = 0; i < size; i++) { ++ p[i] = -1; ++ } ++} ++ ++static int dwc_otg_param_initialized(int32_t val) ++{ ++ return val != -1; ++} ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); ++ if (!core_if->core_params) { ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, ++ sizeof(*core_if->core_params) / ++ sizeof(int32_t)); ++ DWC_PRINTF("Setting default values for core params\n"); ++ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); ++ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_param_dma_desc_enable_default); ++ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_param_dma_burst_size_default); ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_param_host_support_fs_ls_low_power_default); ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_param_enable_dynamic_fifo_default); ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_param_data_fifo_size_default); ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_param_dev_rx_fifo_size_default); ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_param_dev_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_param_host_rx_fifo_size_default); ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_param_host_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_param_host_perio_tx_fifo_size_default); ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_param_max_transfer_size_default); ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_param_max_packet_count_default); ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_param_host_channels_default); ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_param_dev_endpoints_default); ++ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); ++ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_param_host_ls_low_power_phy_clk_default); ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_param_phy_ulpi_ext_vbus_default); ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_param_phy_utmi_width_default); ++ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); ++ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); ++ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_param_en_multiple_tx_fifo_default); ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_param_dev_perio_tx_fifo_size_default, ++ i); ++ } ++ ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_param_dev_tx_fifo_size_default, ++ i); ++ } ++ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); ++ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); ++ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); ++ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); ++ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_param_tx_thr_length_default); ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_param_rx_thr_length_default); ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_param_ahb_thr_ratio_default); ++ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default); ++ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default); ++ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default); ++ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default); ++ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default); ++ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default); ++ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default); ++ DWC_PRINTF("Finished setting default values for core params\n"); ++ ++ return 0; ++} ++ ++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->dma_enable; ++} ++ ++/* Checks if the parameter is outside of its valid range of values */ ++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ ++ (((_param_) < (_low_)) || \ ++ ((_param_) > (_high_))) ++ ++/* Parameter access functions */ ++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int valid; ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for otg_cap parameter\n"); ++ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ valid = 1; ++ switch (val) { ++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: ++ if (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ valid = 0; ++ break; ++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: ++ if ((core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ valid = 0; ++ } ++ break; ++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: ++ /* always valid */ ++ break; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { ++ DWC_ERROR ++ ("%d invalid for otg_cap paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (((core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? ++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_cap = val; ++out: ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_cap; ++} ++ ++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for opt parameter\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->opt = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->opt; ++} ++ ++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma enable\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dma_enable = val; ++ if (val == 0) { ++ dwc_otg_set_param_dma_desc_enable(core_if, 0); ++ } ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_enable; ++} ++ ++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma_enable\n"); ++ DWC_WARN("dma_desc_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) ++ && ((dwc_otg_get_param_dma_enable(core_if) == 0) ++ || (core_if->hwcfg4.b.desc_dma == 0))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dma_desc_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_desc_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_desc_enable; ++} ++ ++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for host_support_fs_low_power\n"); ++ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->host_support_fs_ls_low_power = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if) ++{ ++ return core_if->core_params->host_support_fs_ls_low_power; ++} ++ ++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); ++ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->enable_dynamic_fifo)) { ++ DWC_ERROR ++ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->enable_dynamic_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->enable_dynamic_fifo; ++} ++ ++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { ++ DWC_WARN("Wrong value for data_fifo_size\n"); ++ DWC_WARN("data_fifo_size must be 32-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > core_if->hwcfg3.b.dfifo_depth) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->data_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", ++ val); ++ } ++ val = core_if->hwcfg3.b.dfifo_depth; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->data_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->data_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); ++ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { ++ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_rx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); ++ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_rx_fifo_size\n"); ++ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_rx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_rx_fifo_size = val; ++ return retval; ++ ++} ++ ++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); ++ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); ++ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ((core_if->hptxfsiz.d32) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_perio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = (core_if->hptxfsiz.d32) >> 16; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_perio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_perio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { ++ DWC_WARN("Wrong value for max_transfer_size\n"); ++ DWC_WARN("max_transfer_size must be 2047-524288\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_transfer_size)) { ++ DWC_ERROR ++ ("%d invalid for max_transfer_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - ++ 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_transfer_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_transfer_size; ++} ++ ++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { ++ DWC_WARN("Wrong value for max_packet_count\n"); ++ DWC_WARN("max_packet_count must be 15-511\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_packet_count)) { ++ DWC_ERROR ++ ("%d invalid for max_packet_count. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_packet_count = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_packet_count; ++} ++ ++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { ++ DWC_WARN("Wrong value for host_channels\n"); ++ DWC_WARN("host_channels must be 1-16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_channels)) { ++ DWC_ERROR ++ ("%d invalid for host_channels. Check HW configurations.\n", ++ val); ++ } ++ val = (core_if->hwcfg2.b.num_host_chan + 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_channels = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_channels; ++} ++ ++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { ++ DWC_WARN("Wrong value for dev_endpoints\n"); ++ DWC_WARN("dev_endpoints must be 1-15\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_dev_ep)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_endpoints)) { ++ DWC_ERROR ++ ("%d invalid for dev_endpoints. Check HW configurations.\n", ++ val); ++ } ++ val = core_if->hwcfg2.b.num_dev_ep; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_endpoints = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_endpoints; ++} ++ ++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for phy_type\n"); ++ DWC_WARN("phy_type must be 0,1 or 2\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECKS ++ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 1) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 2) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->hwcfg2.b.fs_phy_type == 1)) { ++ valid = 1; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { ++ DWC_ERROR ++ ("%d invalid for phy_type. Check HW configurations.\n", ++ val); ++ } ++ if (core_if->hwcfg2.b.hs_phy_type) { ++ if ((core_if->hwcfg2.b.hs_phy_type == 3) || ++ (core_if->hwcfg2.b.hs_phy_type == 1)) { ++ val = DWC_PHY_TYPE_PARAM_UTMI; ++ } else { ++ val = DWC_PHY_TYPE_PARAM_ULPI; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ core_if->core_params->phy_type = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_type; ++} ++ ++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for speed parameter\n"); ++ DWC_WARN("max_speed parameter must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ if ((val == 0) ++ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { ++ if (dwc_otg_param_initialized(core_if->core_params->speed)) { ++ DWC_ERROR ++ ("%d invalid for speed paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->speed = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->speed; ++} ++ ++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN ++ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); ++ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) ++ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_ls_low_power_phy_clk)) { ++ DWC_ERROR ++ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS) ? ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_ls_low_power_phy_clk = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_ls_low_power_phy_clk; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); ++ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ddr = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ddr; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); ++ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ext_vbus = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ext_vbus; ++} ++ ++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { ++ DWC_WARN("Wrong valaue for phy_utmi_width\n"); ++ DWC_WARN("phy_utmi_width must be 8 or 16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_utmi_width = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_utmi_width; ++} ++ ++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); ++ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ulpi_fs_ls = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ulpi_fs_ls; ++} ++ ++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ts_dline\n"); ++ DWC_WARN("ts_dline must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ts_dline = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ts_dline; ++} ++ ++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for i2c_enable\n"); ++ DWC_WARN("i2c_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECK ++ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { ++ DWC_ERROR ++ ("%d invalid for i2c_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ ++ core_if->core_params->i2c_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->i2c_enable; ++} ++ ++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); ++ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); ++ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->en_multiple_tx_fifo)) { ++ DWC_ERROR ++ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->en_multiple_tx_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->en_multiple_tx_fifo; ++} ++ ++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, ++ int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); ++ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { ++ DWC_WARN("Wrong value for thr_ctl\n"); ++ DWC_WARN("thr_ctl must be 0-7\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val != 0) && ++ (!dwc_otg_get_param_dma_enable(core_if) || ++ !core_if->hwcfg4.b.ded_fifo_en)) { ++ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { ++ DWC_ERROR ++ ("%d invalid for parameter thr_ctl. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->thr_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->thr_ctl; ++} ++ ++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for lpm_enable\n"); ++ DWC_WARN("lpm_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && !core_if->hwcfg3.b.otg_lpm_en) { ++ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter lpm_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->lpm_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->lpm_enable; ++} ++ ++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for tx_thr_length\n"); ++ DWC_WARN("tx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->tx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->tx_thr_length; ++} ++ ++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for rx_thr_length\n"); ++ DWC_WARN("rx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->rx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->rx_thr_length; ++} ++ ++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 1, 1) && ++ DWC_OTG_PARAM_TEST(val, 4, 4) && ++ DWC_OTG_PARAM_TEST(val, 8, 8) && ++ DWC_OTG_PARAM_TEST(val, 16, 16) && ++ DWC_OTG_PARAM_TEST(val, 32, 32) && ++ DWC_OTG_PARAM_TEST(val, 64, 64) && ++ DWC_OTG_PARAM_TEST(val, 128, 128) && ++ DWC_OTG_PARAM_TEST(val, 256, 256)) { ++ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_burst_size = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_burst_size; ++} ++ ++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { ++ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter pti_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->pti_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->pti_enable; ++} ++ ++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter mpi_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->mpi_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->mpi_enable; ++} ++ ++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg3.b.adp_supp == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->adp_supp_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter adp_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->adp_supp_enable = val; ++ /*Set OTG version 2.0 in case of enabling ADP*/ ++ if (val) ++ dwc_otg_set_param_otg_ver(core_if, 1); ++ ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->adp_supp_enable; ++} ++ ++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); ++ DWC_WARN("ic_usb_cap must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { ++ DWC_ERROR ++ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ic_usb_cap = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ic_usb_cap; ++} ++ ++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); ++ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val ++ && (core_if->snpsid < OTG_CORE_REV_2_81a ++ || !dwc_otg_get_param_thr_ctl(core_if))) { ++ valid = 0; ++ } else if (val ++ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < ++ 4)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->ahb_thr_ratio)) { ++ DWC_ERROR ++ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ ++ core_if->core_params->ahb_thr_ratio = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_thr_ratio; ++} ++ ++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ hwcfg4_data_t hwcfg4 = {.d32 = 0 }; ++ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `power_down'\n", val); ++ DWC_WARN("power_down must be 0 - 2\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) { ++ valid = 0; ++ } ++ if ((val == 3) ++ && ((core_if->snpsid < OTG_CORE_REV_3_00a) ++ || (hwcfg4.b.xhiber == 0))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->power_down)) { ++ DWC_ERROR ++ ("%d invalid for parameter power_down. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->power_down = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->power_down; ++} ++ ++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val); ++ DWC_WARN("reload_ctl must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) { ++ DWC_ERROR("%d invalid for parameter reload_ctl." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->reload_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->reload_ctl; ++} ++ ++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val); ++ DWC_WARN("dev_out_nak must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) { ++ DWC_ERROR("%d invalid for parameter dev_out_nak." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->dev_out_nak = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_out_nak; ++} ++ ++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val); ++ DWC_WARN("cont_on_bna must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) { ++ DWC_ERROR("%d invalid for parameter cont_on_bna." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->cont_on_bna = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->cont_on_bna; ++} ++ ++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val); ++ DWC_WARN("ahb_single must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) { ++ DWC_ERROR("%d invalid for parameter ahb_single." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ahb_single = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_single; ++} ++ ++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val); ++ DWC_WARN ++ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_ver = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_ver; ++} ++ ++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.hstnegscs; ++} ++ ++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.sesreqscs; ++} ++ ++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if(core_if->otg_ver == 0) { ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ otgctl.b.hnpreq = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); ++ } else { ++ core_if->otg_sts = val; ++ } ++} ++ ++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->snpsid; ++} ++ ++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ return gintsts.b.curmode; ++} ++ ++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.hnpcap; ++} ++ ++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.hnpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.srpcap; ++} ++ ++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.srpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) ++{ ++ dcfg_data_t dcfg; ++ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */ ++ ++ dcfg.d32 = -1; //GRAYG ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); ++ if (NULL == core_if) ++ DWC_ERROR("reg request with NULL core_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, ++ core_if, core_if->dev_if); ++ if (NULL == core_if->dev_if) ++ DWC_ERROR("reg request with NULL dev_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs); ++ if (NULL == core_if->dev_if->dev_global_regs) ++ DWC_ERROR("reg request with NULL dev_global_regs\n"); ++ else { ++ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)->dcfg = %p\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs, ++ &core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ } ++ return dcfg.b.devspd; ++} ++ ++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dcfg_data_t dcfg; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtconnsts; ++} ++ ++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ return dsts.b.enumspd; ++} ++ ++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtpwr; ++ ++} ++ ++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->hibernation_suspend; ++} ++ ++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtsusp; ++ ++} ++ ++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) ++{ ++ hfir_data_t hfir; ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ return hfir.b.frint; ++ ++} ++ ++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hfir_data_t hfir; ++ uint32_t fram_int; ++ fram_int = calc_frame_interval(core_if); ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ if (!core_if->core_params->reload_ctl) { ++ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" ++ "not set to 1.\nShould load driver with reload_ctl=1" ++ " module parameter\n"); ++ return; ++ } ++ switch (fram_int) { ++ case 3750: ++ if ((val < 3350) || (val > 4150)) { ++ DWC_WARN("HFIR interval for HS core and 30 MHz" ++ "clock freq should be from 3350 to 4150\n"); ++ return; ++ } ++ break; ++ case 30000: ++ if ((val < 26820) || (val > 33180)) { ++ DWC_WARN("HFIR interval for FS/LS core and 30 MHz" ++ "clock freq should be from 26820 to 33180\n"); ++ return; ++ } ++ break; ++ case 6000: ++ if ((val < 5360) || (val > 6640)) { ++ DWC_WARN("HFIR interval for HS core and 48 MHz" ++ "clock freq should be from 5360 to 6640\n"); ++ return; ++ } ++ break; ++ case 48000: ++ if ((val < 42912) || (val > 53088)) { ++ DWC_WARN("HFIR interval for FS/LS core and 48 MHz" ++ "clock freq should be from 42912 to 53088\n"); ++ return; ++ } ++ break; ++ case 7500: ++ if ((val < 6700) || (val > 8300)) { ++ DWC_WARN("HFIR interval for HS core and 60 MHz" ++ "clock freq should be from 6700 to 8300\n"); ++ return; ++ } ++ break; ++ case 60000: ++ if ((val < 53640) || (val > 65536)) { ++ DWC_WARN("HFIR interval for FS/LS core and 60 MHz" ++ "clock freq should be from 53640 to 65536\n"); ++ return; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown frame interval\n"); ++ return; ++ break; ++ ++ } ++ hfir.b.frint = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); ++} ++ ++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ return hcfg.b.modechtimen; ++ ++} ++ ++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.modechtimen = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl; ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ return dctl.b.rmtwkupsig; ++} ++ ++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ DWC_ASSERT(! ++ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), ++ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", ++ core_if->lx_state, lpmcfg.b.prt_sleep_sts); ++ ++ return lpmcfg.b.prt_sleep_sts; ++} ++ ++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.rem_wkup_en; ++} ++ ++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.appl_resp; ++} ++ ++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.appl_resp = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.hsic_connect; ++} ++ ++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hsic_connect = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.inv_sel_hsic; ++ ++} ++ ++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.inv_sel_hsic = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++} ++ ++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); ++} ++ ++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++} ++ ++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); ++} ++ ++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++} ++ ++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++} ++ ++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); ++} ++ ++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); ++} ++ ++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->ggpio); ++} ++ ++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); ++} ++ ++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(core_if->host_if->hprt0); ++ ++} ++ ++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->guid); ++} ++ ++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); ++} ++ ++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++} ++ ++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) ++{ ++ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) ++{ ++ core_if->srp_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); ++} ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ gotgctl_data_t val; ++ ++ val.d32 = DWC_READ_REG32(addr); ++ if (val.b.sesreq) { ++ DWC_ERROR("Session Request Already active!\n"); ++ return; ++ } ++ ++ DWC_INFO("Session Request Initated\n"); //NOTICE ++ mem.d32 = DWC_READ_REG32(addr); ++ mem.b.sesreq = 1; ++ DWC_WRITE_REG32(addr, mem.d32); ++ ++ /* Start the SRP timer */ ++ dwc_otg_pcd_start_srp_timer(core_if); ++ return; ++} +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil.h b/drivers/usb/host/dwc_otg/dwc_otg_cil.h +new file mode 100644 +index 000000000000..79dbf8374f02 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h +@@ -0,0 +1,1464 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ ++ * $Revision: #123 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CIL_H__) ++#define __DWC_CIL_H__ ++ ++#include "dwc_list.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_regs.h" ++ ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_adp.h" ++ ++/** ++ * @file ++ * This file contains the interface to the Core Interface Layer. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#define MAX_DMA_DESCS_PER_EP 256 ++ ++/** ++ * Enumeration for the data buffer mode ++ */ ++typedef enum _data_buffer_mode { ++ BM_STANDARD = 0, /* data buffer is in normal mode */ ++ BM_SG = 1, /* data buffer uses the scatter/gather mode */ ++ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ ++ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ ++ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ ++} data_buffer_mode_e; ++#endif //DWC_UTE_CFI ++ ++/** Macros defined for DWC OTG HW Release version */ ++ ++#define OTG_CORE_REV_2_60a 0x4F54260A ++#define OTG_CORE_REV_2_71a 0x4F54271A ++#define OTG_CORE_REV_2_72a 0x4F54272A ++#define OTG_CORE_REV_2_80a 0x4F54280A ++#define OTG_CORE_REV_2_81a 0x4F54281A ++#define OTG_CORE_REV_2_90a 0x4F54290A ++#define OTG_CORE_REV_2_91a 0x4F54291A ++#define OTG_CORE_REV_2_92a 0x4F54292A ++#define OTG_CORE_REV_2_93a 0x4F54293A ++#define OTG_CORE_REV_2_94a 0x4F54294A ++#define OTG_CORE_REV_3_00a 0x4F54300A ++ ++/** ++ * Information for each ISOC packet. ++ */ ++typedef struct iso_pkt_info { ++ uint32_t offset; ++ uint32_t length; ++ int32_t status; ++} iso_pkt_info_t; ++ ++/** ++ * The dwc_ep structure represents the state of a single ++ * endpoint when acting in device mode. It contains the data items ++ * needed for an endpoint to be activated and transfer packets. ++ */ ++typedef struct dwc_ep { ++ /** EP number used for register address lookup */ ++ uint8_t num; ++ /** EP direction 0 = OUT */ ++ unsigned is_in:1; ++ /** EP active. */ ++ unsigned active:1; ++ ++ /** ++ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic ++ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ ++ unsigned tx_fifo_num:4; ++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ ++ unsigned type:2; ++#define DWC_OTG_EP_TYPE_CONTROL 0 ++#define DWC_OTG_EP_TYPE_ISOC 1 ++#define DWC_OTG_EP_TYPE_BULK 2 ++#define DWC_OTG_EP_TYPE_INTR 3 ++ ++ /** DATA start PID for INTR and BULK EP */ ++ unsigned data_pid_start:1; ++ /** Frame (even/odd) for ISOC EP */ ++ unsigned even_odd_frame:1; ++ /** Max Packet bytes */ ++ unsigned maxpacket:11; ++ ++ /** Max Transfer size */ ++ uint32_t maxxfer; ++ ++ /** @name Transfer state */ ++ /** @{ */ ++ ++ /** ++ * Pointer to the beginning of the transfer buffer -- do not modify ++ * during transfer. ++ */ ++ ++ dwc_dma_t dma_addr; ++ ++ dwc_dma_t dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ ++ uint8_t *start_xfer_buff; ++ /** pointer to the transfer buffer */ ++ uint8_t *xfer_buff; ++ /** Number of bytes to transfer */ ++ unsigned xfer_len:19; ++ /** Number of bytes transferred. */ ++ unsigned xfer_count:19; ++ /** Sent ZLP */ ++ unsigned sent_zlp:1; ++ /** Total len for control transfer */ ++ unsigned total_len:19; ++ ++ /** stall clear flag */ ++ unsigned stall_clear_flag:1; ++ ++ /** SETUP pkt cnt rollover flag for EP0 out*/ ++ unsigned stp_rollover; ++ ++#ifdef DWC_UTE_CFI ++ /* The buffer mode */ ++ data_buffer_mode_e buff_mode; ++ ++ /* The chain of DMA descriptors. ++ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. ++ */ ++ dwc_otg_dma_desc_t *descs; ++ ++ /* The DMA address of the descriptors chain start */ ++ dma_addr_t descs_dma_addr; ++ /** This variable stores the length of the last enqueued request */ ++ uint32_t cfi_req_len; ++#endif //DWC_UTE_CFI ++ ++/** Max DMA Descriptor count for any EP */ ++#define MAX_DMA_DESC_CNT 256 ++ /** Allocated DMA Desc count */ ++ uint32_t desc_cnt; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** Next frame num to setup next ISOC transfer */ ++ uint32_t frame_num; ++ /** Indicates SOF number overrun in DSTS */ ++ uint8_t frm_overrun; ++ ++#ifdef DWC_UTE_PER_IO ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t xiso_frame_num; ++ /** bInterval */ ++ uint32_t xiso_bInterval; ++ /** Count of currently active transfers - shall be either 0 or 1 */ ++ int xiso_active_xfers; ++ int xiso_queued_xfers; ++#endif ++#ifdef DWC_EN_ISOC ++ /** ++ * Variables specific for ISOC EPs ++ * ++ */ ++ /** DMA addresses of ISOC buffers */ ++ dwc_dma_t dma_addr0; ++ dwc_dma_t dma_addr1; ++ ++ dwc_dma_t iso_dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *iso_desc_addr; ++ ++ /** pointer to the transfer buffers */ ++ uint8_t *xfer_buff0; ++ uint8_t *xfer_buff1; ++ ++ /** number of ISOC Buffer is processing */ ++ uint32_t proc_buf_num; ++ /** Interval of ISOC Buffer processing */ ++ uint32_t buf_proc_intrvl; ++ /** Data size for regular frame */ ++ uint32_t data_per_frame; ++ ++ /* todo - pattern data support is to be implemented in the future */ ++ /** Data size for pattern frame */ ++ uint32_t data_pattern_frame; ++ /** Frame number of pattern data */ ++ uint32_t sync_frame; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** ISO Packet number per frame */ ++ uint32_t pkt_per_frm; ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t next_frame; ++ /** Number of packets per buffer processing */ ++ uint32_t pkt_cnt; ++ /** Info for all isoc packets */ ++ iso_pkt_info_t *pkt_info; ++ /** current pkt number */ ++ uint32_t cur_pkt; ++ /** current pkt number */ ++ uint8_t *cur_pkt_addr; ++ /** current pkt number */ ++ uint32_t cur_pkt_dma_addr; ++#endif /* DWC_EN_ISOC */ ++ ++/** @} */ ++} dwc_ep_t; ++ ++/* ++ * Reasons for halting a host channel. ++ */ ++typedef enum dwc_otg_halt_status { ++ DWC_OTG_HC_XFER_NO_HALT_STATUS, ++ DWC_OTG_HC_XFER_COMPLETE, ++ DWC_OTG_HC_XFER_URB_COMPLETE, ++ DWC_OTG_HC_XFER_ACK, ++ DWC_OTG_HC_XFER_NAK, ++ DWC_OTG_HC_XFER_NYET, ++ DWC_OTG_HC_XFER_STALL, ++ DWC_OTG_HC_XFER_XACT_ERR, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN, ++ DWC_OTG_HC_XFER_BABBLE_ERR, ++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, ++ DWC_OTG_HC_XFER_AHB_ERR, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, ++ DWC_OTG_HC_XFER_URB_DEQUEUE ++} dwc_otg_halt_status_e; ++ ++/** ++ * Host channel descriptor. This structure represents the state of a single ++ * host channel when acting in host mode. It contains the data items needed to ++ * transfer packets to an endpoint via a host channel. ++ */ ++typedef struct dwc_hc { ++ /** Host channel number used for register address lookup */ ++ uint8_t hc_num; ++ ++ /** Device to access */ ++ unsigned dev_addr:7; ++ ++ /** EP to access */ ++ unsigned ep_num:4; ++ ++ /** EP direction. 0: OUT, 1: IN */ ++ unsigned ep_is_in:1; ++ ++ /** ++ * EP speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ unsigned speed:2; ++#define DWC_OTG_EP_SPEED_LOW 0 ++#define DWC_OTG_EP_SPEED_FULL 1 ++#define DWC_OTG_EP_SPEED_HIGH 2 ++ ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - DWC_OTG_EP_TYPE_CONTROL: 0 ++ * - DWC_OTG_EP_TYPE_ISOC: 1 ++ * - DWC_OTG_EP_TYPE_BULK: 2 ++ * - DWC_OTG_EP_TYPE_INTR: 3 ++ */ ++ unsigned ep_type:2; ++ ++ /** Max packet size in bytes */ ++ unsigned max_packet:11; ++ ++ /** ++ * PID for initial transaction. ++ * 0: DATA0,
++ * 1: DATA2,
++ * 2: DATA1,
++ * 3: MDATA (non-Control EP), ++ * SETUP (Control EP) ++ */ ++ unsigned data_pid_start:2; ++#define DWC_OTG_HC_PID_DATA0 0 ++#define DWC_OTG_HC_PID_DATA2 1 ++#define DWC_OTG_HC_PID_DATA1 2 ++#define DWC_OTG_HC_PID_MDATA 3 ++#define DWC_OTG_HC_PID_SETUP 3 ++ ++ /** Number of periodic transactions per (micro)frame */ ++ unsigned multi_count:2; ++ ++ /** @name Transfer State */ ++ /** @{ */ ++ ++ /** Pointer to the current transfer buffer position. */ ++ uint8_t *xfer_buff; ++ /** ++ * In Buffer DMA mode this buffer will be used ++ * if xfer_buff is not DWORD aligned. ++ */ ++ dwc_dma_t align_buff; ++ /** Total number of bytes to transfer. */ ++ uint32_t xfer_len; ++ /** Number of bytes transferred so far. */ ++ uint32_t xfer_count; ++ /** Packet count at start of transfer.*/ ++ uint16_t start_pkt_count; ++ ++ /** ++ * Flag to indicate whether the transfer has been started. Set to 1 if ++ * it has been started, 0 otherwise. ++ */ ++ uint8_t xfer_started; ++ ++ /** ++ * Set to 1 to indicate that a PING request should be issued on this ++ * channel. If 0, process normally. ++ */ ++ uint8_t do_ping; ++ ++ /** ++ * Set to 1 to indicate that the error count for this transaction is ++ * non-zero. Set to 0 if the error count is 0. ++ */ ++ uint8_t error_state; ++ ++ /** ++ * Set to 1 to indicate that this channel should be halted the next ++ * time a request is queued for the channel. This is necessary in ++ * slave mode if no request queue space is available when an attempt ++ * is made to halt the channel. ++ */ ++ uint8_t halt_on_queue; ++ ++ /** ++ * Set to 1 if the host channel has been halted, but the core is not ++ * finished flushing queued requests. Otherwise 0. ++ */ ++ uint8_t halt_pending; ++ ++ /** ++ * Reason for halting the host channel. ++ */ ++ dwc_otg_halt_status_e halt_status; ++ ++ /* ++ * Split settings for the host channel ++ */ ++ uint8_t do_split; /**< Enable split for the channel */ ++ uint8_t complete_split; /**< Enable complete split */ ++ uint8_t hub_addr; /**< Address of high speed hub */ ++ ++ uint8_t port_addr; /**< Port of the low/full speed device */ ++ /** Split transaction position ++ * One of the following values: ++ * - DWC_HCSPLIT_XACTPOS_MID ++ * - DWC_HCSPLIT_XACTPOS_BEGIN ++ * - DWC_HCSPLIT_XACTPOS_END ++ * - DWC_HCSPLIT_XACTPOS_ALL */ ++ uint8_t xact_pos; ++ ++ /** Set when the host channel does a short read. */ ++ uint8_t short_read; ++ ++ /** ++ * Number of requests issued for this channel since it was assigned to ++ * the current transfer (not counting PINGs). ++ */ ++ uint8_t requests; ++ ++ /** ++ * Queue Head for the transfer being processed by this channel. ++ */ ++ struct dwc_otg_qh *qh; ++ ++ /** @} */ ++ ++ /** Entry in list of host channels. */ ++ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Number of Transfer Descriptors */ ++ uint16_t ntd; ++ ++ /** Descriptor List DMA address */ ++ dwc_dma_t desc_list_addr; ++ ++ /** Scheduling micro-frame bitmap. */ ++ uint8_t schinfo; ++ ++ /** @} */ ++} dwc_hc_t; ++ ++/** ++ * The following parameters may be specified when starting the module. These ++ * parameters define how the DWC_otg controller should be configured. ++ */ ++typedef struct dwc_otg_core_params { ++ int32_t opt; ++ ++ /** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++ int32_t otg_cap; ++ ++ /** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++ int32_t dma_enable; ++ ++ /** ++ * When DMA mode is enabled specifies whether to use address DMA or DMA ++ * Descriptor mode for accessing the data FIFOs in device mode. The driver ++ * will automatically detect the value for this if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++ int32_t dma_desc_enable; ++ /** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ ++ ++ /** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++ int32_t speed; ++ /** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++ int32_t host_support_fs_ls_low_power; ++ ++ /** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++ int32_t host_ls_low_power_phy_clk; ++ ++ /** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++ int32_t enable_dynamic_fifo; ++ ++ /** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++ int32_t data_fifo_size; ++ ++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++ int32_t dev_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t dev_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_perio_tx_fifo_size; ++ ++ /** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++ int32_t max_transfer_size; ++ ++ /** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++ int32_t max_packet_count; ++ ++ /** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++ int32_t host_channels; ++ ++ /** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++ int32_t dev_endpoints; ++ ++ /** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++ int32_t phy_type; ++ ++ /** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++ int32_t phy_utmi_width; ++ ++ /** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++ int32_t phy_ulpi_ddr; ++ ++ /** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++ int32_t phy_ulpi_ext_vbus; ++ ++ /** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++ int32_t i2c_enable; ++ ++ int32_t ulpi_fs_ls; ++ ++ int32_t ts_dline; ++ ++ /** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++ int32_t en_multiple_tx_fifo; ++ ++ /** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++ uint32_t thr_ctl; ++ ++ /** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t tx_thr_length; ++ ++ /** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t rx_thr_length; ++ ++ /** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++ int32_t lpm_enable; ++ ++ /** Per Transfer Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t pti_enable; ++ ++ /** Multi Processor Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t mpi_enable; ++ ++ /** IS_USB Capability ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t ic_usb_cap; ++ ++ /** AHB Threshold Ratio ++ * 2'b00 AHB Threshold = MAC Threshold ++ * 2'b01 AHB Threshold = 1/2 MAC Threshold ++ * 2'b10 AHB Threshold = 1/4 MAC Threshold ++ * 2'b11 AHB Threshold = 1/8 MAC Threshold ++ */ ++ int32_t ahb_thr_ratio; ++ ++ /** ADP Support ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t adp_supp_enable; ++ ++ /** HFIR Reload Control ++ * 0 - The HFIR cannot be reloaded dynamically. ++ * 1 - Allow dynamic reloading of the HFIR register during runtime. ++ */ ++ int32_t reload_ctl; ++ ++ /** DCFG: Enable device Out NAK ++ * 0 - The core does not set NAK after Bulk Out transfer complete. ++ * 1 - The core sets NAK after Bulk OUT transfer complete. ++ */ ++ int32_t dev_out_nak; ++ ++ /** DCFG: Enable Continue on BNA ++ * After receiving BNA interrupt the core disables the endpoint,when the ++ * endpoint is re-enabled by the application the core starts processing ++ * 0 - from the DOEPDMA descriptor ++ * 1 - from the descriptor which received the BNA. ++ */ ++ int32_t cont_on_bna; ++ ++ /** GAHBCFG: AHB Single Support ++ * This bit when programmed supports SINGLE transfers for remainder ++ * data in a transfer for DMA mode of operation. ++ * 0 - in this case the remainder data will be sent using INCR burst size. ++ * 1 - in this case the remainder data will be sent using SINGLE burst size. ++ */ ++ int32_t ahb_single; ++ ++ /** Core Power down mode ++ * 0 - No Power Down is enabled ++ * 1 - Reserved ++ * 2 - Complete Power Down (Hibernation) ++ */ ++ int32_t power_down; ++ ++ /** OTG revision supported ++ * 0 - OTG 1.3 revision ++ * 1 - OTG 2.0 revision ++ */ ++ int32_t otg_ver; ++ ++} dwc_otg_core_params_t; ++ ++#ifdef DEBUG ++struct dwc_otg_core_if; ++typedef struct hc_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_hc_t *hc; ++} hc_xfer_info_t; ++#endif ++ ++typedef struct ep_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_ep_t *ep; ++ uint8_t state; ++} ep_xfer_info_t; ++/* ++ * Device States ++ */ ++typedef enum dwc_otg_lx_state { ++ /** On state */ ++ DWC_OTG_L0, ++ /** LPM sleep state*/ ++ DWC_OTG_L1, ++ /** USB suspend state*/ ++ DWC_OTG_L2, ++ /** Off state*/ ++ DWC_OTG_L3 ++} dwc_otg_lx_state_e; ++ ++struct dwc_otg_global_regs_backup { ++ uint32_t gotgctl_local; ++ uint32_t gintmsk_local; ++ uint32_t gahbcfg_local; ++ uint32_t gusbcfg_local; ++ uint32_t grxfsiz_local; ++ uint32_t gnptxfsiz_local; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ uint32_t glpmcfg_local; ++#endif ++ uint32_t gi2cctl_local; ++ uint32_t hptxfsiz_local; ++ uint32_t pcgcctl_local; ++ uint32_t gdfifocfg_local; ++ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; ++ uint32_t gpwrdn_local; ++ uint32_t xhib_pcgcctl; ++ uint32_t xhib_gpwrdn; ++}; ++ ++struct dwc_otg_host_regs_backup { ++ uint32_t hcfg_local; ++ uint32_t haintmsk_local; ++ uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; ++ uint32_t hprt0_local; ++ uint32_t hfir_local; ++}; ++ ++struct dwc_otg_dev_regs_backup { ++ uint32_t dcfg; ++ uint32_t dctl; ++ uint32_t daintmsk; ++ uint32_t diepmsk; ++ uint32_t doepmsk; ++ uint32_t diepctl[MAX_EPS_CHANNELS]; ++ uint32_t dieptsiz[MAX_EPS_CHANNELS]; ++ uint32_t diepdma[MAX_EPS_CHANNELS]; ++}; ++/** ++ * The dwc_otg_core_if structure contains information needed to manage ++ * the DWC_otg controller acting in either host or device mode. It ++ * represents the programming view of the controller as a whole. ++ */ ++struct dwc_otg_core_if { ++ /** Parameters that define how the core should be configured.*/ ++ dwc_otg_core_params_t *core_params; ++ ++ /** Core Global registers starting at offset 000h. */ ++ dwc_otg_core_global_regs_t *core_global_regs; ++ ++ /** Device-specific information */ ++ dwc_otg_dev_if_t *dev_if; ++ /** Host-specific information */ ++ dwc_otg_host_if_t *host_if; ++ ++ /** Value from SNPSID register */ ++ uint32_t snpsid; ++ ++ /* ++ * Set to 1 if the core PHY interface bits in USBCFG have been ++ * initialized. ++ */ ++ uint8_t phy_init_done; ++ ++ /* ++ * SRP Success flag, set by srp success interrupt in FS I2C mode ++ */ ++ uint8_t srp_success; ++ uint8_t srp_timer_started; ++ /** Timer for SRP. If it expires before SRP is successful ++ * clear the SRP. */ ++ dwc_timer_t *srp_timer; ++ ++#ifdef DWC_DEV_SRPCAP ++ /* This timer is needed to power on the hibernated host core if SRP is not ++ * initiated on connected SRP capable device for limited period of time ++ */ ++ uint8_t pwron_timer_started; ++ dwc_timer_t *pwron_timer; ++#endif ++ /* Common configuration information */ ++ /** Power and Clock Gating Control Register */ ++ volatile uint32_t *pcgcctl; ++#define DWC_OTG_PCGCCTL_OFFSET 0xE00 ++ ++ /** Push/pop addresses for endpoints or host channels.*/ ++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; ++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 ++#define DWC_OTG_DATA_FIFO_SIZE 0x1000 ++ ++ /** Total RAM for FIFOs (Bytes) */ ++ uint16_t total_fifo_size; ++ /** Size of Rx FIFO (Bytes) */ ++ uint16_t rx_fifo_size; ++ /** Size of Non-periodic Tx FIFO (Bytes) */ ++ uint16_t nperio_tx_fifo_size; ++ ++ /** 1 if DMA is enabled, 0 otherwise. */ ++ uint8_t dma_enable; ++ ++ /** 1 if DMA descriptor is enabled, 0 otherwise. */ ++ uint8_t dma_desc_enable; ++ ++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t pti_enh_enable; ++ ++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t multiproc_int_enable; ++ ++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ ++ uint8_t en_multiple_tx_fifo; ++ ++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in ++ * process of being queued */ ++ uint8_t queuing_high_bandwidth; ++ ++ /** Hardware Configuration -- stored here for convenience.*/ ++ hwcfg1_data_t hwcfg1; ++ hwcfg2_data_t hwcfg2; ++ hwcfg3_data_t hwcfg3; ++ hwcfg4_data_t hwcfg4; ++ fifosize_data_t hptxfsiz; ++ ++ /** Host and Device Configuration -- stored here for convenience.*/ ++ hcfg_data_t hcfg; ++ dcfg_data_t dcfg; ++ ++ /** The operational State, during transations ++ * (a_host>>a_peripherial and b_device=>b_host) this may not ++ * match the core but allows the software to determine ++ * transitions. ++ */ ++ uint8_t op_state; ++ ++ /** ++ * Set to 1 if the HCD needs to be restarted on a session request ++ * interrupt. This is required if no connector ID status change has ++ * occurred since the HCD was last disconnected. ++ */ ++ uint8_t restart_hcd_on_session_req; ++ ++ /** HCD callbacks */ ++ /** A-Device is a_host */ ++#define A_HOST (1) ++ /** A-Device is a_suspend */ ++#define A_SUSPEND (2) ++ /** A-Device is a_peripherial */ ++#define A_PERIPHERAL (3) ++ /** B-Device is operating as a Peripheral. */ ++#define B_PERIPHERAL (4) ++ /** B-Device is operating as a Host. */ ++#define B_HOST (5) ++ ++ /** HCD callbacks */ ++ struct dwc_otg_cil_callbacks *hcd_cb; ++ /** PCD callbacks */ ++ struct dwc_otg_cil_callbacks *pcd_cb; ++ ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t p_tx_msk; ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t tx_msk; ++ ++ /** Workqueue object used for handling several interrupts */ ++ dwc_workq_t *wq_otg; ++ ++ /** Timer object used for handling "Wakeup Detected" Interrupt */ ++ dwc_timer_t *wkp_timer; ++ /** This arrays used for debug purposes for DEV OUT NAK enhancement */ ++ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; ++ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; ++#ifdef DEBUG ++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; ++ ++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; ++ ++ uint32_t hfnum_7_samples; ++ uint64_t hfnum_7_frrem_accum; ++ uint32_t hfnum_0_samples; ++ uint64_t hfnum_0_frrem_accum; ++ uint32_t hfnum_other_samples; ++ uint64_t hfnum_other_frrem_accum; ++#endif ++ ++#ifdef DWC_UTE_CFI ++ uint16_t pwron_rxfsiz; ++ uint16_t pwron_gnptxfsiz; ++ uint16_t pwron_txfsiz[15]; ++ ++ uint16_t init_rxfsiz; ++ uint16_t init_gnptxfsiz; ++ uint16_t init_txfsiz[15]; ++#endif ++ ++ /** Lx state of device */ ++ dwc_otg_lx_state_e lx_state; ++ ++ /** Saved Core Global registers */ ++ struct dwc_otg_global_regs_backup *gr_backup; ++ /** Saved Host registers */ ++ struct dwc_otg_host_regs_backup *hr_backup; ++ /** Saved Device registers */ ++ struct dwc_otg_dev_regs_backup *dr_backup; ++ ++ /** Power Down Enable */ ++ uint32_t power_down; ++ ++ /** ADP support Enable */ ++ uint32_t adp_enable; ++ ++ /** ADP structure object */ ++ dwc_otg_adp_t adp; ++ ++ /** hibernation/suspend flag */ ++ int hibernation_suspend; ++ ++ /** Device mode extended hibernation flag */ ++ int xhib; ++ ++ /** OTG revision supported */ ++ uint32_t otg_ver; ++ ++ /** OTG status flag used for HNP polling */ ++ uint8_t otg_sts; ++ ++ /** Pointer to either hcd->lock or pcd->lock */ ++ dwc_spinlock_t *lock; ++ ++ /** Start predict NextEP based on Learning Queue if equal 1, ++ * also used as counter of disabled NP IN EP's */ ++ uint8_t start_predict; ++ ++ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and ++ * active, 0xff otherwise */ ++ uint8_t nextep_seq[MAX_EPS_CHANNELS]; ++ ++ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ ++ uint8_t first_in_nextep_seq; ++ ++ /** Frame number while entering to ISR - needed for ISOCs **/ ++ uint32_t frame_num; ++ ++}; ++ ++#ifdef DEBUG ++/* ++ * This function is called when transfer is timed out. ++ */ ++extern void hc_xfer_timeout(void *ptr); ++#endif ++ ++/* ++ * This function is called when transfer is timed out on endpoint. ++ */ ++extern void ep_xfer_timeout(void *ptr); ++ ++/* ++ * The following functions are functions for works ++ * using during handling some interrupts ++ */ ++extern void w_conn_id_status_change(void *p); ++ ++extern void w_wakeup_detected(void *p); ++ ++/** Saves global register values into system memory. */ ++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); ++/** Saves device register values into system memory. */ ++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); ++/** Saves host register values into system memory. */ ++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); ++/** Restore global register values. */ ++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); ++/** Restore host register values. */ ++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); ++/** Restore device register values. */ ++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, ++ int rem_wakeup); ++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); ++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, ++ int is_host); ++ ++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int restore_mode, int reset); ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/* ++ * The following functions support initialization of the CIL driver component ++ * and the DWC_otg controller. ++ */ ++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); ++ ++/** @name Device CIL Functions ++ * The following functions support managing the DWC_otg controller in device ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, ++ uint32_t * _dest); ++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep, int _dma); ++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); ++ ++#ifdef DWC_EN_ISOC ++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++#endif /* DWC_EN_ISOC */ ++/**@}*/ ++ ++/** @name Host CIL Functions ++ * The following functions support managing the DWC_otg controller in host ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); ++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc); ++ ++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); ++ ++/* Macro used to clear one channel interrupt */ ++#define clear_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcint_data_t hcint_clear = {.d32 = 0}; \ ++ hcint_clear.b._intr_ = 1; \ ++ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ ++} while (0) ++ ++/* ++ * Macro used to disable one channel interrupt. Channel interrupts are ++ * disabled when the channel is halted or released by the interrupt handler. ++ * There is no need to handle further interrupts of that type until the ++ * channel is re-assigned. In fact, subsequent handling may cause crashes ++ * because the channel structures are cleaned up when the channel is released. ++ */ ++#define disable_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ ++ hcintmsk.b._intr_ = 1; \ ++ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ ++} while (0) ++ ++/** ++ * This function Reads HPRT0 in preparation to modify. It keeps the ++ * WC bits 0 so that if they are read as 1, they won't clear when you ++ * write it back ++ */ ++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); ++ hprt0.b.prtena = 0; ++ hprt0.b.prtconndet = 0; ++ hprt0.b.prtenchng = 0; ++ hprt0.b.prtovrcurrchng = 0; ++ return hprt0.d32; ++} ++ ++/**@}*/ ++ ++/** @name Common CIL Functions ++ * The following functions support managing the DWC_otg controller in either ++ * device or host mode. ++ */ ++/**@{*/ ++ ++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes); ++ ++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); ++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & ++ DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); ++} ++ ++/** ++ * This function returns the OTG Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the IN endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ return (v & 0xffff); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the OUT endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ ++ return ((v & 0xffff0000) >> 16); ++} ++ ++/** ++ * This function returns the Device IN EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t v, msk, emp; ++ ++ if (core_if->multiproc_int_enable) { ++ msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[ep->num]); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } else { ++ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } ++ ++ return v; ++} ++ ++/** ++ * This function returns the Device OUT EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * ++ _core_if, dwc_ep_t * _ep) ++{ ++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; ++ uint32_t v; ++ doepmsk_data_t msk = {.d32 = 0 }; ++ ++ if (_core_if->multiproc_int_enable) { ++ msk.d32 = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[_ep->num]); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } else { ++ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } ++ return v; ++} ++ ++/** ++ * This function returns the Host All Channel Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * ++ _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); ++} ++ ++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * ++ _core_if, dwc_hc_t * _hc) ++{ ++ return (DWC_READ_REG32 ++ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); ++} ++ ++/** ++ * This function returns the mode of the operation, host or device. ++ * ++ * @return 0 - Device Mode, 1 - Host Mode ++ */ ++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); ++} ++ ++/**@}*/ ++ ++/** ++ * DWC_otg CIL callback structure. This structure allows the HCD and ++ * PCD to register functions used for starting and stopping the PCD ++ * and HCD for role change on for a DRD. ++ */ ++typedef struct dwc_otg_cil_callbacks { ++ /** Start function for role change */ ++ int (*start) (void *_p); ++ /** Stop Function for role change */ ++ int (*stop) (void *_p); ++ /** Disconnect Function for role change */ ++ int (*disconnect) (void *_p); ++ /** Resume/Remote wakeup Function */ ++ int (*resume_wakeup) (void *_p); ++ /** Suspend function */ ++ int (*suspend) (void *_p); ++ /** Session Start (SRP) */ ++ int (*session_start) (void *_p); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /** Sleep (switch to L0 state) */ ++ int (*sleep) (void *_p); ++#endif ++ /** Pointer passed to start() and stop() */ ++ void *p; ++} dwc_otg_cil_callbacks_t; ++ ++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); ++ ++////////////////////////////////////////////////////////////////////// ++/** Start the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->start) { ++ core_if->hcd_cb->start(core_if->hcd_cb->p); ++ } ++} ++ ++/** Stop the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->stop) { ++ core_if->hcd_cb->stop(core_if->hcd_cb->p); ++ } ++} ++ ++/** Disconnect the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { ++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); ++ } ++} ++ ++/** Inform the HCD the a New Session has begun. Helper function for ++ * using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { ++ core_if->hcd_cb->session_start(core_if->hcd_cb->p); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * Inform the HCD about LPM sleep. ++ * Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { ++ core_if->hcd_cb->sleep(core_if->hcd_cb->p); ++ } ++} ++#endif ++ ++/** Resume the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { ++ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); ++ } ++} ++ ++/** Start the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->start) { ++ core_if->pcd_cb->start(core_if->pcd_cb->p); ++ } ++} ++ ++/** Stop the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->stop) { ++ core_if->pcd_cb->stop(core_if->pcd_cb->p); ++ } ++} ++ ++/** Suspend the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { ++ core_if->pcd_cb->suspend(core_if->pcd_cb->p); ++ } ++} ++ ++/** Resume the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////// ++ ++#endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +new file mode 100644 +index 000000000000..96c76e38cd37 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +@@ -0,0 +1,1594 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ ++ * $Revision: #32 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * This file contains the Common Interrupt handlers. ++ */ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_hcd.h" ++ ++#ifdef DEBUG ++inline const char *op_state_str(dwc_otg_core_if_t * core_if) ++{ ++ return (core_if->op_state == A_HOST ? "a_host" : ++ (core_if->op_state == A_SUSPEND ? "a_suspend" : ++ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : ++ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : ++ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); ++} ++#endif ++ ++/** This function will log a debug message ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", ++ dwc_otg_mode(core_if) ? "Host" : "Device"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.modemismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function handles the OTG Interrupts. It reads the OTG ++ * Interrupt Register (GOTGINT) to determine what interrupt has ++ * occurred. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gotgint_data_t gotgint; ++ gotgctl_data_t gotgctl; ++ gintmsk_data_t gintmsk; ++ gpwrdn_data_t gpwrdn; ++ ++ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, ++ op_state_str(core_if)); ++ ++ if (gotgint.b.sesenddet) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session End Detected++ (%s)\n", ++ op_state_str(core_if)); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ ++ if (core_if->op_state == B_HOST) { ++ cil_pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ /* If not B_HOST and Device HNP still set. HNP ++ * Did not succeed!*/ ++ if (gotgctl.b.devhnpen) { ++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); ++ __DWC_ERROR("Device Not Connected/Responding!\n"); ++ } ++ ++ /* If Session End Detected the B-Cable has ++ * been disconnected. */ ++ /* Reset PCD and Gadget driver to a ++ * clean state. */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->adp_enable) { ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_sense_start(core_if); ++ } ++ } ++ ++ gotgctl.d32 = 0; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ } ++ if (gotgint.b.sesreqsucstschng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session Reqeust Success Status Change++\n"); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ if (gotgctl.b.sesreqscs) { ++ ++ if ((core_if->core_params->phy_type == ++ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { ++ core_if->srp_success = 1; ++ } else { ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_resume(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ } ++ } ++ if (gotgint.b.hstnegsucstschng) { ++ /* Print statements during the HNP interrupt handling ++ * can cause it to fail.*/ ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ /* WA for 3.00a- HW is not setting cur_mode, even sometimes ++ * this does not help*/ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_udelay(100); ++ if (gotgctl.b.hstnegscs) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ core_if->op_state = B_HOST; ++ /* ++ * Need to disable SOF interrupt immediately. ++ * When switching from device to host, the PCD ++ * interrupt handler won't handle the ++ * interrupt if host mode is already set. The ++ * HCD interrupt handler won't get called if ++ * the HCD state is HALT. This means that the ++ * interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ /* Call callback function with spin lock released */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_HOST; ++ } ++ } else { ++ gotgctl.d32 = 0; ++ gotgctl.b.hnpreq = 1; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++ } ++ } ++ if (gotgint.b.hstnegdet) { ++ /* The disconnect interrupt is set at the same time as ++ * Host Negotiation Detected. During the mode ++ * switch all interrupts are cleared so the disconnect ++ * interrupt handler will not get executed. ++ */ ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Host Negotiation Detected++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Device")); ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", ++ core_if->op_state); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_PERIPHERAL; ++ } else { ++ /* ++ * Need to disable SOF interrupt immediately. When ++ * switching from device to host, the PCD interrupt ++ * handler won't handle the interrupt if host mode is ++ * already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that ++ * the interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ if (gotgint.b.adevtoutchng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "A-Device Timeout Change++\n"); ++ } ++ if (gotgint.b.debdone) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); ++ } ++ ++ /* Clear GOTGINT */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32); ++ ++ return 1; ++} ++ ++void w_conn_id_status_change(void *p) ++{ ++ dwc_otg_core_if_t *core_if = p; ++ uint32_t count = 0; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); ++ ++ /* B-Device connector (Device Mode) */ ++ if (gotgctl.b.conidsts) { ++ /* Wait for switch to device mode. */ ++ while (!dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ /* A-Device connector (Host Mode) */ ++ while (!dwc_otg_is_host_mode(core_if)) { ++ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = A_HOST; ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++} ++ ++/** ++ * This function handles the Connector ID Status Change Interrupt. It ++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this ++ * is a Device to Host Mode transition or a Host Mode to Device ++ * Transition. ++ * ++ * This only occurs when the cable is connected/removed from the PHY ++ * connector. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++ /* ++ * Need to disable SOF interrupt immediately. If switching from device ++ * to host, the PCD interrupt handler won't handle the interrupt if ++ * host mode is already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that the interrupt does ++ * not get handled and Linux complains loudly. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ " ++Connector ID Status Change Interrupt++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ /* ++ * Need to schedule a work, as there are possible DELAY function calls ++ * Release lock before scheduling workq as it holds spinlock during scheduling ++ */ ++ ++ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, ++ core_if, "connection id status change"); ++ DWC_SPINLOCK(core_if->lock); ++ ++ /* Set flag and clear interrupt */ ++ gintsts.b.conidstschng = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device is initiating the Session ++ * Request Protocol to request the host to turn on bus power so a new ++ * session can begin. The handler responds by turning on bus power. If ++ * the DWC_otg controller is in low power mode, the handler brings the ++ * controller out of low power mode before turning on bus power. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++#ifndef DWC_HOST_ONLY ++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("SRP: Device mode\n"); ++ } else { ++ hprt0_data_t hprt0; ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sessreqintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++void w_wakeup_detected(void *p) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; ++ /* ++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms ++ * so that OPT tests pass with all PHYs). ++ */ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++#if 0 ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_udelay(10); ++#endif //0 ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); ++// dwc_mdelay(70); ++ hprt0.b.prtres = 0; /* Resume */ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", ++ DWC_READ_REG32(core_if->host_if->hprt0)); ++ ++ cil_hcd_resume(core_if); ++ ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++} ++ ++/** ++ * This interrupt indicates that the DWC_otg controller has detected a ++ * resume or remote wakeup sequence. If the DWC_otg controller is in ++ * low power mode, the handler must brings the controller out of low ++ * power mode. The controller automatically begins resume ++ * signaling. The handler schedules a time to stop resume signaling. ++ */ ++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "++Resume and Remote Wakeup Detected Interrupt++\n"); ++ ++ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ dsts)); ++ if (core_if->lx_state == DWC_OTG_L2) { ++#ifdef PARTIAL_POWER_DOWN ++ if (core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", ++ power.d32); ++ ++ power.b.stoppclk = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ } ++#endif ++ /* Clear the Remote Wakeup Signaling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } else { ++ if (core_if->lx_state != DWC_OTG_L1) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); ++ } else { ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.wkupintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * Device disconnect. ++ */ ++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 }; ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * remote wakeup sequence. ++ */ ++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_ANY, ++ "++Powerdown Remote Wakeup Detected Interrupt++\n"); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (gpwrdn.b.idsts) { // Device Mode ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_device_hibernation_restore(core_if, 0, 0); ++ } ++ } else { ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_host_hibernation_restore(core_if, 1, 0); ++ } ++ } ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n"); ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local; ++ if (gpwrdn.b.dis_vbus == 1) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ } ++ ++ if (core_if->adp_enable) { ++ uint8_t is_host = 0; ++ DWC_SPINUNLOCK(core_if->lock); ++ /* Change the core_if's lock to hcd/pcd lock depend on mode? */ ++#ifndef DWC_HOST_ONLY ++ if (gpwrdn_temp.b.idsts) ++ core_if->lock = otg_dev->pcd->lock; ++#endif ++#ifndef DWC_DEVICE_ONLY ++ if (!gpwrdn_temp.b.idsts) { ++ core_if->lock = otg_dev->hcd->lock; ++ is_host = 1; ++ } ++#endif ++ DWC_PRINTF("RESTART ADP\n"); ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ ++ /* Disable PMU and restart ADP */ ++ gpwrdn_temp.d32 = 0; ++ gpwrdn_temp.b.pmuactv = 1; ++ gpwrdn_temp.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_PRINTF("Check point 1\n"); ++ dwc_mdelay(110); ++ dwc_otg_adp_start(core_if, is_host); ++ DWC_SPINLOCK(core_if->lock); ++ } ++ ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) && ++ gpwrdn.b.bsessvld == 0) { ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */ ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ ++ return 1; ++} ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * status change either on IDDIG or BSessVld. ++ */ ++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev) ++{ ++ int retval; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (core_if->power_down == 2) { ++ if (core_if->hibernation_suspend <= 0) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } else ++ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local; ++ ++ } else { ++ gpwrdn_temp.d32 = core_if->adp.gpwrdn; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) { ++ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev); ++ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) { ++ retval = dwc_otg_handle_pwrdn_session_change(core_if); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * SRP. ++ */ ++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++#ifdef DWC_DEV_SRPCAP ++ if (core_if->pwron_timer_started) { ++ core_if->pwron_timer_started = 0; ++ DWC_TIMER_CANCEL(core_if->pwron_timer); ++ } ++#endif ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Programm Disable VBUS to 0 */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Initialize the core as Host */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ ++ return 1; ++} ++ ++/** This interrupt indicates that restore command after Hibernation ++ * was completed by the core. */ ++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if) ++{ ++ pcgcctl_data_t pcgcctl; ++ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n"); ++ ++ //TODO De-assert restore signal. 8.a ++ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (pcgcctl.b.restoremode == 1) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ /* ++ * If restore mode is Remote Wakeup, ++ * unmask Remote Wakeup interrupt. ++ */ ++ gintmsk.b.wkupintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device has been disconnected from ++ * the root port. ++ */ ++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), ++ op_state_str(core_if)); ++ ++/** @todo Consolidate this if statement. */ ++#ifndef DWC_HOST_ONLY ++ if (core_if->op_state == B_HOST) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else if (dwc_otg_is_device_mode(core_if)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (gotgctl.b.hstsethnpen == 1) { ++ /* Do nothing, if HNP in process the OTG ++ * interrupt "Host Negotiation Detected" ++ * interrupt will do the mode switch. ++ */ ++ } else if (gotgctl.b.devhnpen == 0) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); ++ } ++ } else { ++ if (core_if->op_state == A_HOST) { ++ /* A-Cable still connected but device disconnected. */ ++ cil_hcd_disconnect(core_if); ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ cil_hcd_stop(core_if); ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ } ++ } ++ } ++#endif ++ /* Change to L3(OFF) state */ ++ core_if->lx_state = DWC_OTG_L3; ++ ++ gintsts.d32 = 0; ++ gintsts.b.disconnect = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that SUSPEND state has been detected on ++ * the USB. ++ * ++ * For HNP the USB Suspend interrupt signals the change from ++ * "a_peripheral" to "a_host". ++ * ++ * When power management is enabled the core will be put in low power ++ * mode. ++ */ ++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ gintsts_data_t gintsts; ++ dcfg_data_t dcfg; ++ ++ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ /* Check the Device status register to determine if the Suspend ++ * state is active. */ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); ++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " ++ "HWCFG4.power Optimize=%d\n", ++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); ++ ++#ifdef PARTIAL_POWER_DOWN ++/** @todo Add a module parameter for power management. */ ++ ++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CIL, "suspend\n"); ++ ++ power.b.pwrclmp = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); ++ } ++#endif ++ /* PCD callback for suspend. Release the lock inside of callback function */ ++ cil_pcd_suspend(core_if); ++ if (core_if->power_down == 2) ++ { ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Start of hibernation completed\n"); ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ /* Enable interrupts from wake up logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Unmask device mode interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ DWC_PRINTF("Hibernation completed\n"); ++ ++ return 1; ++ } ++ } else if (core_if->power_down == 3) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n"); ++ core_if->xhib = 1; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ /* Wait for 10 PHY clocks */ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1); ++ ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_switch = 1; ++ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n"); ++ ++ return 1; ++ } ++ } ++ } else { ++ if (core_if->op_state == A_PERIPHERAL) { ++ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); ++ /* Clear the a_peripheral flag, back to a_host. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0); ++ ++ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn; ++ gpwrdn.b.restore = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ restore_lpm_i2c_regs(core_if); ++ ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 0; ++ pcgcctl.b.extnd_hiber_switch = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.d32 |= 0x608; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 1; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ pcgcctl.b.rstpdwnmodule = 1; ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function hadles LPM transaction received interrupt. ++ */ ++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ gintsts_data_t gintsts; ++ ++ if (!core_if->core_params->lpm_enable) { ++ DWC_PRINTF("Unexpected LPM interrupt\n"); ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); ++ ++ if (dwc_otg_is_host_mode(core_if)) { ++ cil_hcd_sleep(core_if); ++ } else { ++ lpmcfg.b.hird_thres |= (1 << 4); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ ++ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ ++ dwc_udelay(10); ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ /* Save the current state */ ++ core_if->lx_state = DWC_OTG_L1; ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.lpmtranrcvd = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd) ++{ ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ gintmsk_data_t gintmsk_common = {.d32 = 0 }; ++ gintmsk_common.b.wkupintr = 1; ++ gintmsk_common.b.sessreqintr = 1; ++ gintmsk_common.b.conidstschng = 1; ++ gintmsk_common.b.otgintr = 1; ++ gintmsk_common.b.modemismatch = 1; ++ gintmsk_common.b.disconnect = 1; ++ gintmsk_common.b.usbsuspend = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gintmsk_common.b.lpmtranrcvd = 1; ++#endif ++ gintmsk_common.b.restoredone = 1; ++ if(dwc_otg_is_device_mode(core_if)) ++ { ++ /** @todo: The port interrupt occurs while in device ++ * mode. Added code to CIL to clear the interrupt for now! ++ */ ++ gintmsk_common.b.portintr = 1; ++ } ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ if(fiq_enable) { ++ local_fiq_disable(); ++ /* Pull in the interrupts that the FIQ has masked */ ++ gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); ++ gintmsk.d32 |= gintmsk_common.d32; ++ /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ ++ reenable_gintmsk->d32 = gintmsk.d32; ++ local_fiq_enable(); ++ } ++ ++ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ ++#ifdef DEBUG ++ /* if any common interrupts set */ ++ if (gintsts.d32 & gintmsk_common.d32) { ++ DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x gintmsk=%08x\n", ++ gintsts.d32, gintmsk.d32); ++ } ++#endif ++ if (!fiq_enable){ ++ if (gahbcfg.b.glblintrmsk) ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ else ++ return 0; ++ } else { ++ /* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface. ++ * Can't trust the global interrupt mask bit in this case. ++ */ ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ } ++ ++} ++ ++/* MACRO for clearing interupt bits in GPWRDN register */ ++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \ ++do { \ ++ gpwrdn_data_t gpwrdn = {.d32=0}; \ ++ gpwrdn.b.__intr = 1; \ ++ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \ ++ 0, gpwrdn.d32); \ ++} while (0) ++ ++/** ++ * Common interrupt handler. ++ * ++ * The common interrupts are those that occur in both Host and Device mode. ++ * This handler handles the following interrupts: ++ * - Mode Mismatch Interrupt ++ * - Disconnect Interrupt ++ * - OTG Interrupt ++ * - Connector ID Status Change Interrupt ++ * - Session Request Interrupt. ++ * - Resume / Remote Wakeup Detected Interrupt. ++ * - LPM Transaction Received Interrupt ++ * - ADP Transaction Received Interrupt ++ * ++ */ ++int32_t dwc_otg_handle_common_intr(void *dev) ++{ ++ int retval = 0; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk_reenable = { .d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_device_t *otg_dev = dev; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (dwc_otg_is_device_mode(core_if)) ++ core_if->frame_num = dwc_otg_get_frame_number(core_if); ++ ++ if (core_if->lock) ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->power_down == 3 && core_if->xhib == 1) { ++ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n"); ++ retval |= dwc_otg_handle_xhib_exit_intr(core_if); ++ core_if->xhib = 2; ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ return retval; ++ } ++ ++ if (core_if->hibernation_suspend <= 0) { ++ /* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end ++ * of this handler - god only knows why it's done like this ++ */ ++ gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd); ++ ++ if (gintsts.b.modemismatch) { ++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); ++ } ++ if (gintsts.b.otgintr) { ++ retval |= dwc_otg_handle_otg_intr(core_if); ++ } ++ if (gintsts.b.conidstschng) { ++ retval |= ++ dwc_otg_handle_conn_id_status_change_intr(core_if); ++ } ++ if (gintsts.b.disconnect) { ++ retval |= dwc_otg_handle_disconnect_intr(core_if); ++ } ++ if (gintsts.b.sessreqintr) { ++ retval |= dwc_otg_handle_session_req_intr(core_if); ++ } ++ if (gintsts.b.wkupintr) { ++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); ++ } ++ if (gintsts.b.usbsuspend) { ++ retval |= dwc_otg_handle_usb_suspend_intr(core_if); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (gintsts.b.lpmtranrcvd) { ++ retval |= dwc_otg_handle_lpm_intr(core_if); ++ } ++#endif ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ if (core_if->power_down == 2) ++ core_if->hibernation_suspend = -1; ++ else if (core_if->power_down == 3 && core_if->xhib == 2) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, 0xFFFFFFFF); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "RESTORE DONE generated\n"); ++ ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl); ++ dwc_udelay(50); ++ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(10); ++ ++ dwc_otg_restore_global_regs(core_if); ++ dwc_otg_restore_dev_regs(core_if, 0); ++ ++ dctl.d32 = 0; ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ core_if->xhib = 0; ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ ++ } ++ ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ DWC_PRINTF(" --Restore done interrupt received-- \n"); ++ retval |= 1; ++ } ++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { ++ /* The port interrupt occurs while in device mode with HPRT0 ++ * Port Enable/Disable. ++ */ ++ gintsts.d32 = 0; ++ gintsts.b.portintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ retval |= 1; ++ gintmsk_reenable.b.portintr = 1; ++ ++ } ++ /* Did we actually handle anything? if so, unmask the interrupt */ ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval); ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32); ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32); ++ if (retval && fiq_enable) { ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32); ++ } ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32); ++ ++ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, disconn_det); ++ if (gpwrdn.b.linestate == 0) { ++ dwc_otg_handle_pwrdn_disconnect_intr(core_if); ++ } else { ++ DWC_PRINTF("Disconnect detected while linestate is not 0\n"); ++ } ++ ++ retval |= 1; ++ } ++ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) { ++ CLEAR_GPWRDN_INTR(core_if, lnstschng); ++ /* remote wakeup from hibernation */ ++ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) { ++ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if); ++ } else { ++ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate); ++ } ++ retval |= 1; ++ } ++ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, rst_det); ++ if (gpwrdn.b.linestate == 0) { ++ DWC_PRINTF("Reset detected\n"); ++ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1); ++ } ++ } ++ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, srp_det); ++ dwc_otg_handle_pwrdn_srp_intr(core_if); ++ retval |= 1; ++ } ++ } ++ /* Handle ADP interrupt here */ ++ if (gpwrdn.b.adp_int) { ++ DWC_PRINTF("ADP interrupt\n"); ++ CLEAR_GPWRDN_INTR(core_if, adp_int); ++ dwc_otg_adp_handle_intr(core_if); ++ retval |= 1; ++ } ++ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) { ++ DWC_PRINTF("STS CHNG interrupt asserted\n"); ++ CLEAR_GPWRDN_INTR(core_if, sts_chngint); ++ dwc_otg_handle_pwrdn_stschng_intr(otg_dev); ++ ++ retval |= 1; ++ } ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ return retval; ++} +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_core_if.h b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h +new file mode 100644 +index 000000000000..4138fd173337 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h +@@ -0,0 +1,705 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ ++ * $Revision: #13 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#if !defined(__DWC_CORE_IF_H__) ++#define __DWC_CORE_IF_H__ ++ ++#include "dwc_os.h" ++ ++/** @file ++ * This file defines DWC_OTG Core API ++ */ ++ ++struct dwc_otg_core_if; ++typedef struct dwc_otg_core_if dwc_otg_core_if_t; ++ ++/** Maximum number of Periodic FIFOs */ ++#define MAX_PERIO_FIFOS 15 ++/** Maximum number of Periodic FIFOs */ ++#define MAX_TX_FIFOS 15 ++ ++/** Maximum number of Endpoints/HostChannels */ ++#define MAX_EPS_CHANNELS 16 ++ ++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); ++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); ++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); ++ ++/** This function should be called on every hardware interrupt. */ ++extern int32_t dwc_otg_handle_common_intr(void *otg_dev); ++ ++/** @name OTG Core Parameters */ ++/** @{ */ ++ ++/** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); ++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 ++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 ++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 ++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ++ ++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); ++#define dwc_param_opt_default 1 ++ ++/** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_enable_default 1 ++ ++/** ++ * When DMA mode is enabled specifies whether to use ++ * address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect ++ * the value for this parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); ++//#define dwc_param_dma_desc_enable_default 1 ++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 ++ ++/** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_burst_size_default 32 ++ ++/** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); ++#define dwc_param_speed_default 0 ++#define DWC_SPEED_PARAM_HIGH 0 ++#define DWC_SPEED_PARAM_FULL 1 ++ ++/** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t ++ * core_if); ++#define dwc_param_host_support_fs_ls_low_power_default 0 ++ ++/** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_host_ls_low_power_phy_clk_default 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 ++ ++/** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_enable_dynamic_fifo_default 1 ++ ++/** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_data_fifo_size_default 8192 ++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_rx_fifo_size_default 1064 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_dev_nperio_tx_fifo_size_default 1024 ++ ++/** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num); ++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int fifo_num); ++#define dwc_param_dev_perio_tx_fifo_size_default 256 ++ ++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_rx_fifo_size_default 1024 ++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_nperio_tx_fifo_size_default 1024 ++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_perio_tx_fifo_size_default 1024 ++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 ++ ++/** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_transfer_size_default 65535 ++ ++/** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_packet_count_default 511 ++ ++/** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_channels_default 12 ++#define dwc_param_host_channels_default 8 // Broadcom BCM2708 ++ ++/** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_endpoints_default 6 ++ ++/** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_TYPE_PARAM_FS 0 ++#define DWC_PHY_TYPE_PARAM_UTMI 1 ++#define DWC_PHY_TYPE_PARAM_ULPI 2 ++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI ++ ++/** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); ++//#define dwc_param_phy_utmi_width_default 16 ++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 ++ ++/** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); ++#define dwc_param_phy_ulpi_ddr_default 0 ++ ++/** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_ULPI_INTERNAL_VBUS 0 ++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 ++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS ++ ++/** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_i2c_enable_default 0 ++ ++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); ++#define dwc_param_ulpi_fs_ls_default 0 ++ ++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); ++#define dwc_param_ts_dline_default 0 ++ ++/** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_en_multiple_tx_fifo_default 1 ++ ++/** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num, int32_t val); ++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num); ++#define dwc_param_dev_tx_fifo_size_default 768 ++ ++/** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); ++#define dwc_param_thr_ctl_default 0 ++ ++/** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_tx_thr_length_default 64 ++ ++/** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_rx_thr_length_default 64 ++ ++/** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_lpm_enable_default 1 ++ ++/** ++ * Specifies whether PTI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_pti_enable_default 0 ++ ++/** ++ * Specifies whether MPI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_mpi_enable_default 0 ++ ++/** ++ * Specifies whether ADP capability is enabled ++ */ ++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_adp_enable_default 0 ++ ++/** ++ * Specifies whether IC_USB capability is enabled ++ */ ++ ++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); ++#define dwc_param_ic_usb_cap_default 0 ++ ++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_thr_ratio_default 0 ++ ++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); ++#define dwc_param_power_down_default 0 ++ ++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); ++#define dwc_param_reload_ctl_default 0 ++ ++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_out_nak_default 0 ++ ++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); ++#define dwc_param_cont_on_bna_default 0 ++ ++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_single_default 0 ++ ++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); ++#define dwc_param_otg_ver_default 0 ++ ++/** @} */ ++ ++/** @name Access to registers and bit-fields */ ++ ++/** ++ * Dump core registers and SPRAM ++ */ ++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * Get host negotiation status. ++ */ ++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get srp status ++ */ ++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set hnpreq bit in the GOTGCTL register. ++ */ ++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get Content of SNPSID register. ++ */ ++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get current mode. ++ * Returns 0 if in device mode, and 1 if in host mode. ++ */ ++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of hnpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hnpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of srpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of srpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of devspeed field in the DCFG register ++ */ ++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of devspeed field in the DCFG register ++ */ ++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get the value of busconnected field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Gets the device enumeration Speed. ++ */ ++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prtpwr field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of flag indicating core state - hibernated or not ++ */ ++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of prtsusp field from the HPRT0 regsiter ++ */ ++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of Fram Interval field from the HFIR regsiter ++ */ ++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of Frame Interval field from the HFIR regsiter ++ */ ++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Set value of prtres field from the HPRT0 register ++ *FIXME Remove? ++ */ ++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of rmtwkupsig bit in DCTL register ++ */ ++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prt_sleep_sts field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of rem_wkup_en field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of appl_resp field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of appl_resp field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of hsic_connect field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hsic_connect field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of inv_sel_hsic field from the GLPMCFG register. ++ */ ++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of inv_sel_hsic field from the GLPMFG register. ++ */ ++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/* ++ * Some functions for accessing registers ++ */ ++ ++/** ++ * GOTGCTL register ++ */ ++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GRXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GNPTXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GGPIO register ++ */ ++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUID register ++ */ ++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GHPTXFSIZE ++ */ ++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); ++ ++/** @} */ ++ ++#endif /* __DWC_CORE_IF_H__ */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_dbg.h b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h +new file mode 100644 +index 000000000000..ccc24e010e44 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h +@@ -0,0 +1,117 @@ ++/* ========================================================================== ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DBG_H__ ++#define __DWC_OTG_DBG_H__ ++ ++/** @file ++ * This file defines debug levels. ++ * Debugging support vanishes in non-debug builds. ++ */ ++ ++/** ++ * The Debug Level bit-mask variable. ++ */ ++extern uint32_t g_dbg_lvl; ++/** ++ * Set the Debug Level variable. ++ */ ++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) ++{ ++ uint32_t old = g_dbg_lvl; ++ g_dbg_lvl = new; ++ return old; ++} ++ ++#define DBG_USER (0x1) ++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ ++#define DBG_CIL (0x2) ++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug ++ * messages */ ++#define DBG_CILV (0x20) ++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug ++ * messages */ ++#define DBG_PCD (0x4) ++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug ++ * messages */ ++#define DBG_PCDV (0x40) ++/** When debug level has the DBG_HCD bit set, display Host debug messages */ ++#define DBG_HCD (0x8) ++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug ++ * messages */ ++#define DBG_HCDV (0x80) ++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host ++ * mode. */ ++#define DBG_HCD_URB (0x800) ++/** When debug level has the DBG_HCDI bit set, display host interrupt ++ * messages. */ ++#define DBG_HCDI (0x1000) ++ ++/** When debug level has any bit set, display debug messages */ ++#define DBG_ANY (0xFF) ++ ++/** All debug messages off */ ++#define DBG_OFF 0 ++ ++/** Prefix string for DWC_DEBUG print macros. */ ++#define USB_DWC "DWC_otg: " ++ ++/** ++ * Print a debug message when the Global debug level variable contains ++ * the bit defined in lvl. ++ * ++ * @param[in] lvl - Debug level, use one of the DBG_ constants above. ++ * @param[in] x - like printf ++ * ++ * Example:

++ * ++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); ++ * ++ *
++ * results in:
++ * ++ * usb-DWC_otg: dwc_otg_cil_init(ca867000) ++ * ++ */ ++#ifdef DEBUG ++ ++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) ++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) ++ ++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) ++ ++#else ++ ++# define DWC_DEBUGPL(lvl, x...) do{}while(0) ++# define DWC_DEBUGP(x...) ++ ++# define CHK_DEBUG_LEVEL(level) (0) ++ ++#endif /*DEBUG*/ ++#endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_driver.c b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +new file mode 100644 +index 000000000000..cb060a7179a3 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -0,0 +1,1757 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ ++ * $Revision: #92 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * The dwc_otg_driver module provides the initialization and cleanup entry ++ * points for the DWC_otg driver. This module will be dynamically installed ++ * after Linux is booted using the insmod command. When the module is ++ * installed, the dwc_otg_driver_init function is called. When the module is ++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. ++ * ++ * This module also defines a data structure for the dwc_otg_driver, which is ++ * used in conjunction with the standard ARM lm_device structure. These ++ * structures allow the OTG driver to comply with the standard Linux driver ++ * model in which devices and drivers are registered with a bus driver. This ++ * has the benefit that Linux can expose attributes of the driver and device ++ * in its special sysfs file system. Users can then read or write files in ++ * this file system to perform diagnostics on the driver components or the ++ * device. ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_fiq_fsm.h" ++ ++#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012" ++#define DWC_DRIVER_DESC "HS OTG USB Controller driver" ++ ++bool microframe_schedule=true; ++ ++static const char dwc_driver_name[] = "dwc_otg"; ++ ++ ++extern int pcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++extern int hcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++extern int pcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void hcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++ ++/*-------------------------------------------------------------------------*/ ++/* Encapsulate the module parameter settings */ ++ ++struct dwc_otg_driver_module_params { ++ int32_t opt; ++ int32_t otg_cap; ++ int32_t dma_enable; ++ int32_t dma_desc_enable; ++ int32_t dma_burst_size; ++ int32_t speed; ++ int32_t host_support_fs_ls_low_power; ++ int32_t host_ls_low_power_phy_clk; ++ int32_t enable_dynamic_fifo; ++ int32_t data_fifo_size; ++ int32_t dev_rx_fifo_size; ++ int32_t dev_nperio_tx_fifo_size; ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ int32_t host_rx_fifo_size; ++ int32_t host_nperio_tx_fifo_size; ++ int32_t host_perio_tx_fifo_size; ++ int32_t max_transfer_size; ++ int32_t max_packet_count; ++ int32_t host_channels; ++ int32_t dev_endpoints; ++ int32_t phy_type; ++ int32_t phy_utmi_width; ++ int32_t phy_ulpi_ddr; ++ int32_t phy_ulpi_ext_vbus; ++ int32_t i2c_enable; ++ int32_t ulpi_fs_ls; ++ int32_t ts_dline; ++ int32_t en_multiple_tx_fifo; ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ uint32_t thr_ctl; ++ uint32_t tx_thr_length; ++ uint32_t rx_thr_length; ++ int32_t pti_enable; ++ int32_t mpi_enable; ++ int32_t lpm_enable; ++ int32_t ic_usb_cap; ++ int32_t ahb_thr_ratio; ++ int32_t power_down; ++ int32_t reload_ctl; ++ int32_t dev_out_nak; ++ int32_t cont_on_bna; ++ int32_t ahb_single; ++ int32_t otg_ver; ++ int32_t adp_enable; ++}; ++ ++static struct dwc_otg_driver_module_params dwc_otg_module_params = { ++ .opt = -1, ++ .otg_cap = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_burst_size = -1, ++ .speed = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .enable_dynamic_fifo = -1, ++ .data_fifo_size = -1, ++ .dev_rx_fifo_size = -1, ++ .dev_nperio_tx_fifo_size = -1, ++ .dev_perio_tx_fifo_size = { ++ /* dev_perio_tx_fifo_size_1 */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .dev_endpoints = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .ts_dline = -1, ++ .en_multiple_tx_fifo = -1, ++ .dev_tx_fifo_size = { ++ /* dev_tx_fifo_size */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .thr_ctl = -1, ++ .tx_thr_length = -1, ++ .rx_thr_length = -1, ++ .pti_enable = -1, ++ .mpi_enable = -1, ++ .lpm_enable = 0, ++ .ic_usb_cap = -1, ++ .ahb_thr_ratio = -1, ++ .power_down = -1, ++ .reload_ctl = -1, ++ .dev_out_nak = -1, ++ .cont_on_bna = -1, ++ .ahb_single = -1, ++ .otg_ver = -1, ++ .adp_enable = -1, ++}; ++ ++//Global variable to switch the fiq fix on or off ++bool fiq_enable = 1; ++// Global variable to enable the split transaction fix ++bool fiq_fsm_enable = true; ++//Bulk split-transaction NAK holdoff in microframes ++uint16_t nak_holdoff = 8; ++ ++unsigned short fiq_fsm_mask = 0x0F; ++ ++/** ++ * This function shows the Driver Version. ++ */ ++static ssize_t version_show(struct device_driver *dev, char *buf) ++{ ++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", ++ DWC_DRIVER_VERSION); ++} ++ ++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); ++ ++/** ++ * Global Debug Level Mask. ++ */ ++uint32_t g_dbg_lvl = 0; /* OFF */ ++ ++/** ++ * This function shows the driver Debug Level. ++ */ ++static ssize_t dbg_level_show(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%0x\n", g_dbg_lvl); ++} ++ ++/** ++ * This function stores the driver Debug Level. ++ */ ++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, ++ size_t count) ++{ ++ g_dbg_lvl = simple_strtoul(buf, NULL, 16); ++ return count; ++} ++ ++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, ++ dbg_level_store); ++ ++/** ++ * This function is called during module intialization ++ * to pass module parameters to the DWC_OTG CORE. ++ */ ++static int set_parameters(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int i; ++ ++ if (dwc_otg_module_params.otg_cap != -1) { ++ retval += ++ dwc_otg_set_param_otg_cap(core_if, ++ dwc_otg_module_params.otg_cap); ++ } ++ if (dwc_otg_module_params.dma_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_enable(core_if, ++ dwc_otg_module_params. ++ dma_enable); ++ } ++ if (dwc_otg_module_params.dma_desc_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_otg_module_params. ++ dma_desc_enable); ++ } ++ if (dwc_otg_module_params.opt != -1) { ++ retval += ++ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); ++ } ++ if (dwc_otg_module_params.dma_burst_size != -1) { ++ retval += ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_otg_module_params. ++ dma_burst_size); ++ } ++ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { ++ retval += ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_otg_module_params. ++ host_support_fs_ls_low_power); ++ } ++ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { ++ retval += ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_otg_module_params. ++ enable_dynamic_fifo); ++ } ++ if (dwc_otg_module_params.data_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_otg_module_params. ++ data_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_otg_module_params.host_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_perio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.max_transfer_size != -1) { ++ retval += ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_otg_module_params. ++ max_transfer_size); ++ } ++ if (dwc_otg_module_params.max_packet_count != -1) { ++ retval += ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_otg_module_params. ++ max_packet_count); ++ } ++ if (dwc_otg_module_params.host_channels != -1) { ++ retval += ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_otg_module_params. ++ host_channels); ++ } ++ if (dwc_otg_module_params.dev_endpoints != -1) { ++ retval += ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_otg_module_params. ++ dev_endpoints); ++ } ++ if (dwc_otg_module_params.phy_type != -1) { ++ retval += ++ dwc_otg_set_param_phy_type(core_if, ++ dwc_otg_module_params.phy_type); ++ } ++ if (dwc_otg_module_params.speed != -1) { ++ retval += ++ dwc_otg_set_param_speed(core_if, ++ dwc_otg_module_params.speed); ++ } ++ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { ++ retval += ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_otg_module_params. ++ host_ls_low_power_phy_clk); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ddr); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ext_vbus); ++ } ++ if (dwc_otg_module_params.phy_utmi_width != -1) { ++ retval += ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_otg_module_params. ++ phy_utmi_width); ++ } ++ if (dwc_otg_module_params.ulpi_fs_ls != -1) { ++ retval += ++ dwc_otg_set_param_ulpi_fs_ls(core_if, ++ dwc_otg_module_params.ulpi_fs_ls); ++ } ++ if (dwc_otg_module_params.ts_dline != -1) { ++ retval += ++ dwc_otg_set_param_ts_dline(core_if, ++ dwc_otg_module_params.ts_dline); ++ } ++ if (dwc_otg_module_params.i2c_enable != -1) { ++ retval += ++ dwc_otg_set_param_i2c_enable(core_if, ++ dwc_otg_module_params. ++ i2c_enable); ++ } ++ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { ++ retval += ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_otg_module_params. ++ en_multiple_tx_fifo); ++ } ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { ++ retval += ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_perio_tx_fifo_size ++ [i], i); ++ } ++ } ++ ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { ++ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_tx_fifo_size ++ [i], i); ++ } ++ } ++ if (dwc_otg_module_params.thr_ctl != -1) { ++ retval += ++ dwc_otg_set_param_thr_ctl(core_if, ++ dwc_otg_module_params.thr_ctl); ++ } ++ if (dwc_otg_module_params.mpi_enable != -1) { ++ retval += ++ dwc_otg_set_param_mpi_enable(core_if, ++ dwc_otg_module_params. ++ mpi_enable); ++ } ++ if (dwc_otg_module_params.pti_enable != -1) { ++ retval += ++ dwc_otg_set_param_pti_enable(core_if, ++ dwc_otg_module_params. ++ pti_enable); ++ } ++ if (dwc_otg_module_params.lpm_enable != -1) { ++ retval += ++ dwc_otg_set_param_lpm_enable(core_if, ++ dwc_otg_module_params. ++ lpm_enable); ++ } ++ if (dwc_otg_module_params.ic_usb_cap != -1) { ++ retval += ++ dwc_otg_set_param_ic_usb_cap(core_if, ++ dwc_otg_module_params. ++ ic_usb_cap); ++ } ++ if (dwc_otg_module_params.tx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_otg_module_params.tx_thr_length); ++ } ++ if (dwc_otg_module_params.rx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_otg_module_params. ++ rx_thr_length); ++ } ++ if (dwc_otg_module_params.ahb_thr_ratio != -1) { ++ retval += ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_otg_module_params.ahb_thr_ratio); ++ } ++ if (dwc_otg_module_params.power_down != -1) { ++ retval += ++ dwc_otg_set_param_power_down(core_if, ++ dwc_otg_module_params.power_down); ++ } ++ if (dwc_otg_module_params.reload_ctl != -1) { ++ retval += ++ dwc_otg_set_param_reload_ctl(core_if, ++ dwc_otg_module_params.reload_ctl); ++ } ++ ++ if (dwc_otg_module_params.dev_out_nak != -1) { ++ retval += ++ dwc_otg_set_param_dev_out_nak(core_if, ++ dwc_otg_module_params.dev_out_nak); ++ } ++ ++ if (dwc_otg_module_params.cont_on_bna != -1) { ++ retval += ++ dwc_otg_set_param_cont_on_bna(core_if, ++ dwc_otg_module_params.cont_on_bna); ++ } ++ ++ if (dwc_otg_module_params.ahb_single != -1) { ++ retval += ++ dwc_otg_set_param_ahb_single(core_if, ++ dwc_otg_module_params.ahb_single); ++ } ++ ++ if (dwc_otg_module_params.otg_ver != -1) { ++ retval += ++ dwc_otg_set_param_otg_ver(core_if, ++ dwc_otg_module_params.otg_ver); ++ } ++ if (dwc_otg_module_params.adp_enable != -1) { ++ retval += ++ dwc_otg_set_param_adp_enable(core_if, ++ dwc_otg_module_params. ++ adp_enable); ++ } ++ return retval; ++} ++ ++/** ++ * This function is the top level interrupt handler for the Common ++ * (Device and host modes) interrupts. ++ */ ++static irqreturn_t dwc_otg_common_irq(int irq, void *dev) ++{ ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_handle_common_intr(dev); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function is called when a lm_device is unregistered with the ++ * dwc_otg_driver. This happens, for example, when the rmmod command is ++ * executed. The device may or may not be electrically present. If it is ++ * present, the driver stops device processing. Any resources used on behalf ++ * of this device are freed. ++ * ++ * @param _dev ++ */ ++#ifdef LM_INTERFACE ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct lm_device *_dev ) ++{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct pci_dev *_dev ) ++{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++#define REM_RETVAL(n) n ++static int dwc_otg_driver_remove( struct platform_device *_dev ) ++{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ if (!otg_dev) { ++ /* Memory allocation for the dwc_otg_device failed. */ ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return REM_RETVAL(-ENOMEM); ++ } ++#ifndef DWC_DEVICE_ONLY ++ if (otg_dev->hcd) { ++ hcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ ++#ifndef DWC_HOST_ONLY ++ if (otg_dev->pcd) { ++ pcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ /* ++ * Free the IRQ ++ */ ++ if (otg_dev->common_irq_installed) { ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), otg_dev); ++#else ++ free_irq(_dev->irq, otg_dev); ++#endif ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ if (otg_dev->core_if) { ++ dwc_otg_cil_remove(otg_dev->core_if); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ /* ++ * Remove the device attributes ++ */ ++ dwc_otg_attr_remove(_dev); ++ ++ /* ++ * Return the memory. ++ */ ++ if (otg_dev->os_dep.base) { ++ iounmap(otg_dev->os_dep.base); ++ } ++ DWC_FREE(otg_dev); ++ ++ /* ++ * Clear the drvdata pointer. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, 0); ++#elif defined(PCI_INTERFACE) ++ release_mem_region(otg_dev->os_dep.rsrc_start, ++ otg_dev->os_dep.rsrc_len); ++ pci_set_drvdata(_dev, 0); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, 0); ++#endif ++ return REM_RETVAL(0); ++} ++ ++/** ++ * This function is called when an lm_device is bound to a ++ * dwc_otg_driver. It creates the driver components required to ++ * control the device (CIL, HCD, and PCD) and it initializes the ++ * device. The driver components are stored in a dwc_otg_device ++ * structure. A reference to the dwc_otg_device is saved in the ++ * lm_device. This allows the driver to access the dwc_otg_device ++ * structure on subsequent calls to driver methods for this device. ++ * ++ * @param _dev Bus device ++ */ ++static int dwc_otg_driver_probe( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev, ++ const struct pci_device_id *id ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++ int retval = 0; ++ dwc_otg_device_t *dwc_otg_device; ++ int devirq; ++ ++ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); ++#ifdef LM_INTERFACE ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); ++#elif defined(PCI_INTERFACE) ++ if (!id) { ++ DWC_ERROR("Invalid pci_device_id %p", id); ++ return -EINVAL; ++ } ++ ++ if (!_dev || (pci_enable_device(_dev) < 0)) { ++ DWC_ERROR("Invalid pci_device %p", _dev); ++ return -ENODEV; ++ } ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); ++ /* other stuff needed as well? */ ++ ++#elif defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", ++ (unsigned)_dev->resource->start, ++ (unsigned)(_dev->resource->end - _dev->resource->start)); ++#endif ++ ++ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t)); ++ ++ if (!dwc_otg_device) { ++ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); ++ return -ENOMEM; ++ } ++ ++ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); ++ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF; ++ dwc_otg_device->os_dep.platformdev = _dev; ++ ++ /* ++ * Map the DWC_otg Core memory into virtual address space. ++ */ ++#ifdef LM_INTERFACE ++ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K); ++ ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ DWC_FREE(dwc_otg_device); ++ return -ENOMEM; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#elif defined(PCI_INTERFACE) ++ _dev->current_state = PCI_D0; ++ _dev->dev.power.power_state = PMSG_ON; ++ ++ if (!_dev->irq) { ++ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", ++ pci_name(_dev)); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -ENODEV; ++ } ++ ++ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0); ++ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0); ++ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n", ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ (unsigned)dwc_otg_device->os_dep.rsrc_len); ++ if (!request_mem_region ++ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error requesting memory\n"); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ ++ dwc_otg_device->os_dep.base = ++ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ if (dwc_otg_device->os_dep.base == NULL) { ++ dev_dbg(&_dev->dev, "error mapping memory\n"); ++ release_mem_region(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base; ++ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.base); ++ ++ pci_set_master(_dev); ++ pci_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", ++ _dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1); ++#if 1 ++ if (!request_mem_region(_dev->resource[0].start, ++ _dev->resource[0].end - _dev->resource[0].start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start, ++ _dev->resource[0].end - ++ _dev->resource[0].start+1); ++ if (fiq_enable) ++ { ++ if (!request_mem_region(_dev->resource[1].start, ++ _dev->resource[1].end - _dev->resource[1].start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, ++ _dev->resource[1].end - ++ _dev->resource[1].start + 1); ++ } ++ ++#else ++ { ++ struct map_desc desc = { ++ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), ++ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), ++ .length = SZ_128K, ++ .type = MT_DEVICE ++ }; ++ iotable_init(&desc, 1); ++ dwc_otg_device->os_dep.base = (void *)desc.virtual; ++ } ++#endif ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#endif ++ ++ /* ++ * Initialize driver data to point to the global DWC_otg ++ * Device structure. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#endif ++ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); ++ ++ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base); ++ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", ++ dwc_otg_device, dwc_otg_device->core_if);//GRAYG ++ ++ if (!dwc_otg_device->core_if) { ++ dev_err(&_dev->dev, "CIL initialization failed!\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); ++ /* ++ * Attempt to ensure this device is really a DWC_otg Controller. ++ * Read and verify the SNPSID register contents. The value should be ++ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3", ++ * as in "OTG version 2.XX" or "OTG version 3.XX". ++ */ ++ ++ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) && ++ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) { ++ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", ++ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Validate parameter values. ++ */ ++ dev_dbg(&_dev->dev, "Calling set_parameters\n"); ++ if (set_parameters(dwc_otg_device->core_if)) { ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Create Device Attributes in sysfs ++ */ ++ dev_dbg(&_dev->dev, "Calling attr_create\n"); ++ dwc_otg_attr_create(_dev); ++ ++ /* ++ * Disable the global interrupt until all the interrupt ++ * handlers are installed. ++ */ ++ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); ++ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); ++ ++ /* ++ * Install the interrupt handler for the common interrupts before ++ * enabling common interrupts in core_init below. ++ */ ++ ++#if defined(PLATFORM_INTERFACE) ++ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); ++#else ++ devirq = _dev->irq; ++#endif ++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", ++ devirq); ++ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); ++ retval = request_irq(devirq, dwc_otg_common_irq, ++ IRQF_SHARED, ++ "dwc_otg", dwc_otg_device); ++ if (retval) { ++ DWC_ERROR("request of irq%d failed\n", devirq); ++ retval = -EBUSY; ++ goto fail; ++ } else { ++ dwc_otg_device->common_irq_installed = 1; ++ } ++ ++#ifndef IRQF_TRIGGER_LOW ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); ++ set_irq_type(devirq, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ IRQT_LOW ++#else ++ IRQ_TYPE_LEVEL_LOW ++#endif ++ ); ++#endif ++#endif /*IRQF_TRIGGER_LOW*/ ++ ++ /* ++ * Initialize the DWC_otg core. ++ */ ++ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); ++ dwc_otg_core_init(dwc_otg_device->core_if); ++ ++#ifndef DWC_HOST_ONLY ++ /* ++ * Initialize the PCD ++ */ ++ dev_dbg(&_dev->dev, "Calling pcd_init\n"); ++ retval = pcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("pcd_init failed\n"); ++ dwc_otg_device->pcd = NULL; ++ goto fail; ++ } ++#endif ++#ifndef DWC_DEVICE_ONLY ++ /* ++ * Initialize the HCD ++ */ ++ dev_dbg(&_dev->dev, "Calling hcd_init\n"); ++ retval = hcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("hcd_init failed\n"); ++ dwc_otg_device->hcd = NULL; ++ goto fail; ++ } ++#endif ++ /* Recover from drvdata having been overwritten by hcd_init() */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PCI_INTERFACE) ++ pci_set_drvdata(_dev, dwc_otg_device); ++ dwc_otg_device->os_dep.pcidev = _dev; ++#endif ++ ++ /* ++ * Enable the global interrupt after all the interrupt ++ * handlers are installed if there is no ADP support else ++ * perform initial actions required for Internal ADP logic. ++ */ ++ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) { ++ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); ++ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); ++ dev_dbg(&_dev->dev, "Done\n"); ++ } else ++ dwc_otg_adp_start(dwc_otg_device->core_if, ++ dwc_otg_is_host_mode(dwc_otg_device->core_if)); ++ ++ return 0; ++ ++fail: ++ dwc_otg_driver_remove(_dev); ++ return retval; ++} ++ ++/** ++ * This structure defines the methods to be called by a bus driver ++ * during the lifecycle of a device on that bus. Both drivers and ++ * devices are registered with a bus driver. The bus driver matches ++ * devices to drivers based on information in the device and driver ++ * structures. ++ * ++ * The probe function is called when the bus driver matches a device ++ * to this driver. The remove function is called when a device is ++ * unregistered with the bus driver. ++ */ ++#ifdef LM_INTERFACE ++static struct lm_driver dwc_otg_driver = { ++ .drv = {.name = (char *)dwc_driver_name,}, ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // 'suspend' and 'resume' absent ++}; ++#elif defined(PCI_INTERFACE) ++static const struct pci_device_id pci_ids[] = { { ++ PCI_DEVICE(0x16c3, 0xabcd), ++ .driver_data = ++ (unsigned long)0xdeadbeef, ++ }, { /* end: all zeroes */ } ++}; ++ ++MODULE_DEVICE_TABLE(pci, pci_ids); ++ ++/* pci driver glue; this is a "new style" PCI driver module */ ++static struct pci_driver dwc_otg_driver = { ++ .name = "dwc_otg", ++ .id_table = pci_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ }, ++}; ++#elif defined(PLATFORM_INTERFACE) ++static struct platform_device_id platform_ids[] = { ++ { ++ .name = "bcm2708_usb", ++ .driver_data = (kernel_ulong_t) 0xdeadbeef, ++ }, ++ { /* end: all zeroes */ } ++}; ++MODULE_DEVICE_TABLE(platform, platform_ids); ++ ++static const struct of_device_id dwc_otg_of_match_table[] = { ++ { .compatible = "brcm,bcm2708-usb", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, dwc_otg_of_match_table); ++ ++static struct platform_driver dwc_otg_driver = { ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ .of_match_table = dwc_otg_of_match_table, ++ }, ++ .id_table = platform_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' ++}; ++#endif ++ ++/** ++ * This function is called when the dwc_otg_driver is installed with the ++ * insmod command. It registers the dwc_otg_driver structure with the ++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function ++ * to be called. In addition, the bus driver will automatically expose ++ * attributes defined for the device and driver in the special sysfs file ++ * system. ++ * ++ * @return ++ */ ++static int __init dwc_otg_driver_init(void) ++{ ++ int retval = 0; ++ int error; ++ struct device_driver *drv; ++ ++ if(fiq_fsm_enable && !fiq_enable) { ++ printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n"); ++ fiq_enable = 1; ++ } ++ ++ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, ++ DWC_DRIVER_VERSION, ++#ifdef LM_INTERFACE ++ "logicmodule"); ++ retval = lm_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.drv; ++#elif defined(PCI_INTERFACE) ++ "pci"); ++ retval = pci_register_driver(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#elif defined(PLATFORM_INTERFACE) ++ "platform"); ++ retval = platform_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#endif ++ if (retval < 0) { ++ printk(KERN_ERR "%s retval=%d\n", __func__, retval); ++ return retval; ++ } ++ printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled"); ++ printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled"); ++ printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled"); ++ ++ error = driver_create_file(drv, &driver_attr_version); ++#ifdef DEBUG ++ error = driver_create_file(drv, &driver_attr_debuglevel); ++#endif ++ return retval; ++} ++ ++module_init(dwc_otg_driver_init); ++ ++/** ++ * This function is called when the driver is removed from the kernel ++ * with the rmmod command. The driver unregisters itself with its bus ++ * driver. ++ * ++ */ ++static void __exit dwc_otg_driver_cleanup(void) ++{ ++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); ++ ++#ifdef LM_INTERFACE ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); ++ lm_driver_unregister(&dwc_otg_driver); ++#elif defined(PCI_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ pci_unregister_driver(&dwc_otg_driver); ++#elif defined(PLATFORM_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ platform_driver_unregister(&dwc_otg_driver); ++#endif ++ ++ printk(KERN_INFO "%s module removed\n", dwc_driver_name); ++} ++ ++module_exit(dwc_otg_driver_cleanup); ++ ++MODULE_DESCRIPTION(DWC_DRIVER_DESC); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE("GPL"); ++ ++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); ++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); ++module_param_named(opt, dwc_otg_module_params.opt, int, 0444); ++MODULE_PARM_DESC(opt, "OPT Mode"); ++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); ++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); ++ ++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, ++ 0444); ++MODULE_PARM_DESC(dma_desc_enable, ++ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); ++ ++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, ++ 0444); ++MODULE_PARM_DESC(dma_burst_size, ++ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); ++module_param_named(speed, dwc_otg_module_params.speed, int, 0444); ++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); ++module_param_named(host_support_fs_ls_low_power, ++ dwc_otg_module_params.host_support_fs_ls_low_power, int, ++ 0444); ++MODULE_PARM_DESC(host_support_fs_ls_low_power, ++ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); ++module_param_named(host_ls_low_power_phy_clk, ++ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); ++MODULE_PARM_DESC(host_ls_low_power_phy_clk, ++ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); ++module_param_named(enable_dynamic_fifo, ++ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); ++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); ++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, ++ 0444); ++MODULE_PARM_DESC(data_fifo_size, ++ "Total number of words in the data FIFO memory 32-32768"); ++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(dev_nperio_tx_fifo_size, ++ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(dev_perio_tx_fifo_size_1, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_2, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_3, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_4, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_5, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_6, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_7, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_8, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_9, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_10, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_11, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_12, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_13, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_14, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_15, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(host_nperio_tx_fifo_size, ++ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(host_perio_tx_fifo_size, ++ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_perio_tx_fifo_size, ++ "Number of words in the host periodic Tx FIFO 16-32768"); ++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, ++ int, 0444); ++/** @todo Set the max to 512K, modify checks */ ++MODULE_PARM_DESC(max_transfer_size, ++ "The maximum transfer size supported in bytes 2047-65535"); ++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, ++ int, 0444); ++MODULE_PARM_DESC(max_packet_count, ++ "The maximum number of packets in a transfer 15-511"); ++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, ++ 0444); ++MODULE_PARM_DESC(host_channels, ++ "The number of host channel registers to use 1-16"); ++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, ++ 0444); ++MODULE_PARM_DESC(dev_endpoints, ++ "The number of endpoints in addition to EP0 available for device mode 1-15"); ++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); ++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); ++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, ++ 0444); ++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); ++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ddr, ++ "ULPI at double or single data rate 0=Single 1=Double"); ++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, ++ int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ext_vbus, ++ "ULPI PHY using internal or external vbus 0=Internal"); ++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); ++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); ++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); ++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); ++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); ++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); ++module_param_named(debug, g_dbg_lvl, int, 0444); ++MODULE_PARM_DESC(debug, ""); ++ ++module_param_named(en_multiple_tx_fifo, ++ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); ++MODULE_PARM_DESC(en_multiple_tx_fifo, ++ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); ++module_param_named(dev_tx_fifo_size_1, ++ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_2, ++ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_3, ++ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_4, ++ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_5, ++ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_6, ++ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_7, ++ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_8, ++ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_9, ++ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_10, ++ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_11, ++ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_12, ++ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_13, ++ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_14, ++ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_15, ++ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); ++ ++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); ++MODULE_PARM_DESC(thr_ctl, ++ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); ++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); ++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); ++ ++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); ++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); ++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); ++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); ++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); ++MODULE_PARM_DESC(ic_usb_cap, ++ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); ++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, ++ 0444); ++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); ++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444); ++MODULE_PARM_DESC(power_down, "Power Down Mode"); ++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444); ++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control"); ++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444); ++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK"); ++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444); ++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA"); ++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444); ++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support"); ++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444); ++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled"); ++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444); ++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0"); ++module_param(microframe_schedule, bool, 0444); ++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler"); ++ ++module_param(fiq_enable, bool, 0444); ++MODULE_PARM_DESC(fiq_enable, "Enable the FIQ"); ++module_param(nak_holdoff, ushort, 0644); ++MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8"); ++module_param(fiq_fsm_enable, bool, 0444); ++MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask"); ++module_param(fiq_fsm_mask, ushort, 0444); ++MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n" ++ "Bit 0 : Non-periodic split transactions\n" ++ "Bit 1 : Periodic split transactions\n" ++ "Bit 2 : High-speed multi-transfer isochronous\n" ++ "All other bits should be set 0."); ++ ++ ++/** @page "Module Parameters" ++ * ++ * The following parameters may be specified when starting the module. ++ * These parameters define how the DWC_otg controller should be ++ * configured. Parameter values are passed to the CIL initialization ++ * function dwc_otg_cil_init ++ * ++ * Example: modprobe dwc_otg speed=1 otg_cap=1 ++ * ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++*/ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_driver.h b/drivers/usb/host/dwc_otg/dwc_otg_driver.h +new file mode 100644 +index 000000000000..6a8be63a0ab2 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h +@@ -0,0 +1,86 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ ++ * $Revision: #19 $ ++ * $Date: 2010/11/15 $ ++ * $Change: 1627671 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DRIVER_H__ ++#define __DWC_OTG_DRIVER_H__ ++ ++/** @file ++ * This file contains the interface to the Linux driver. ++ */ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_core_if.h" ++ ++/* Type declarations */ ++struct dwc_otg_pcd; ++struct dwc_otg_hcd; ++ ++/** ++ * This structure is a wrapper that encapsulates the driver components used to ++ * manage a single DWC_otg controller. ++ */ ++typedef struct dwc_otg_device { ++ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE ++ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD ++ * require this. */ ++ struct os_dependent os_dep; ++ ++ /** Pointer to the core interface structure. */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Pointer to the PCD structure. */ ++ struct dwc_otg_pcd *pcd; ++ ++ /** Pointer to the HCD structure. */ ++ struct dwc_otg_hcd *hcd; ++ ++ /** Flag to indicate whether the common IRQ handler is installed. */ ++ uint8_t common_irq_installed; ++ ++} dwc_otg_device_t; ++ ++/*We must clear S3C24XX_EINTPEND external interrupt register ++ * because after clearing in this register trigerred IRQ from ++ * H/W core in kernel interrupt can be occured again before OTG ++ * handlers clear all IRQ sources of Core registers because of ++ * timing latencies and Low Level IRQ Type. ++ */ ++#ifdef CONFIG_MACH_IPMATE ++#define S3C2410X_CLEAR_EINTPEND() \ ++do { \ ++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ ++} while (0) ++#else ++#define S3C2410X_CLEAR_EINTPEND() do { } while (0) ++#endif ++ ++#endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +new file mode 100644 +index 000000000000..13047c08fb71 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -0,0 +1,1355 @@ ++/* ++ * dwc_otg_fiq_fsm.c - The finite state machine FIQ ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * This FIQ implements functionality that performs split transactions on ++ * the dwc_otg hardware without any outside intervention. A split transaction ++ * is "queued" by nominating a specific host channel to perform the entirety ++ * of a split transaction. This FIQ will then perform the microframe-precise ++ * scheduling required in each phase of the transaction until completion. ++ * ++ * The FIQ functionality is glued into the Synopsys driver via the entry point ++ * in the FSM enqueue function, and at the exit point in handling a HC interrupt ++ * for a FSM-enabled channel. ++ * ++ * NB: Large parts of this implementation have architecture-specific code. ++ * For porting this functionality to other ARM machines, the minimum is required: ++ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed ++ * to the FIQ ++ * - A method of forcing a software generated interrupt from FIQ mode that then ++ * triggers an IRQ entry (with the dwc USB handler called by this IRQ number) ++ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same ++ * processor core - there is no locking between the FIQ and IRQ (aside from ++ * local_fiq_disable) ++ * ++ */ ++ ++#include "dwc_otg_fiq_fsm.h" ++ ++ ++char buffer[1000*16]; ++int wptr; ++void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...) ++{ ++ enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR; ++ va_list args; ++ char text[17]; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) }; ++ ++ if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR) ++ { ++ snprintf(text, 9, " %4d:%1u ", hfnum.b.frnum/8, hfnum.b.frnum & 7); ++ va_start(args, fmt); ++ vsnprintf(text+8, 9, fmt, args); ++ va_end(args); ++ ++ memcpy(buffer + wptr, text, 16); ++ wptr = (wptr + 16) % sizeof(buffer); ++ } ++} ++ ++/** ++ * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock ++ * Must be called with local interrupts and FIQ disabled. ++ */ ++#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) ++{ ++ unsigned long tmp; ++ uint32_t newval; ++ fiq_lock_t lockval; ++ smp_mb__before_spinlock(); ++ /* Nested locking, yay. If we are on the same CPU as the fiq, then the disable ++ * will be sufficient. If we are on a different CPU, then the lock protects us. */ ++ prefetchw(&lock->slock); ++ asm volatile ( ++ "1: ldrex %0, [%3]\n" ++ " add %1, %0, %4\n" ++ " strex %2, %1, [%3]\n" ++ " teq %2, #0\n" ++ " bne 1b" ++ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) ++ : "r" (&lock->slock), "I" (1 << 16) ++ : "cc"); ++ ++ while (lockval.tickets.next != lockval.tickets.owner) { ++ wfe(); ++ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); ++ } ++ smp_mb(); ++} ++#else ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) { } ++#endif ++ ++/** ++ * fiq_fsm_spin_unlock() - ARMv6+ bare bones spinunlock ++ */ ++#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) ++{ ++ smp_mb(); ++ lock->tickets.owner++; ++ dsb_sev(); ++} ++#else ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } ++#endif ++ ++/** ++ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction ++ * @channel: channel to re-enable ++ */ ++static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force) ++{ ++ hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) }; ++ ++ hcchar.b.chen = 0; ++ if (st->channel[n].hcchar_copy.b.eptype & 0x1) { ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ /* Hardware bug workaround: update the ssplit index */ ++ if (st->channel[n].hcsplt_copy.b.spltena) ++ st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; ++ ++ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++ } ++ ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); ++ hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ hcchar.b.chen = 1; ++ ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); ++ fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force); ++} ++ ++/** ++ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage ++ * @st: Pointer to the channel's state ++ * @n : channel number ++ * ++ * Change host channel registers to perform a complete-split transaction. Being mindful of the ++ * endpoint direction, set control regs up correctly. ++ */ ++static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n) ++{ ++ hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) }; ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ ++ hcsplt.b.compsplt = 1; ++ if (st->channel[n].hcchar_copy.b.epdir == 1) { ++ // If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket. ++ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; ++ } else { ++ // If OUT, the CSPLIT result contains handshake only. ++ hctsiz.b.xfersize = 0; ++ } ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++ mb(); ++} ++ ++static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n) ++{ ++ /* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */ ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ ++ if (st->channel[n].hcchar_copy.b.epdir == 0) { ++ return st->channel[n].hctsiz_copy.b.xfersize; ++ } else { ++ return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize; ++ } ++ ++} ++ ++ ++/** ++ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT ++ * ++ * Of use only for IN periodic transfers. ++ */ ++static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n) ++{ ++ hcdma_data_t hcdma; ++ int i = st->channel[n].dma_info.index; ++ int len; ++ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; ++ ++ len = fiq_get_xfer_len(st, n); ++ fiq_print(FIQDBG_INT, st, "LEN: %03d", len); ++ st->channel[n].dma_info.slot_len[i] = len; ++ i++; ++ if (i > 6) ++ BUG(); ++ ++ hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0]; ++ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ st->channel[n].dma_info.index = i; ++ return 0; ++} ++ ++/** ++ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ ++ */ ++static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n) ++{ ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; ++ hctsiz.b.pktcnt = 1; ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++} ++ ++/** ++ * fiq_iso_out_advance() - update DMA address and split position bits ++ * for isochronous OUT transactions. ++ * ++ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and ++ * Split-BEGIN states are not handled - this is done when the transaction was queued. ++ * ++ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state. ++ */ ++static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n) ++{ ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; ++ int last = 0; ++ int i = st->channel[n].dma_info.index; ++ ++ fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i); ++ i++; ++ if (i == 4) ++ last = 1; ++ if (st->channel[n].dma_info.slot_len[i+1] == 255) ++ last = 1; ++ ++ /* New DMA address - address of bounce buffer referred to in index */ ++ hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; ++ //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n)); ++ //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; ++ fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); ++ fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]); ++ hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT); ++ hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ); ++ hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID; ++ /* Set up new packet length */ ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i]; ++ fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32); ++ ++ st->channel[n].dma_info.index++; ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ return last; ++} ++ ++/** ++ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT ++ * ++ * Despite the limitations of the DWC core, we can force a microframe pipeline of ++ * isochronous OUT start-split transactions while waiting for a corresponding other-type ++ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it ++ * is very unlikely that filling the start-split FIFO will cause data loss. ++ * This allows much better interleaving of transactions in an order-independent way- ++ * there is no requirement to prioritise isochronous, just a state-space search has ++ * to be performed on each periodic start-split complete interrupt. ++ */ ++static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n) ++{ ++ int hub_addr = st->channel[n].hub_addr; ++ int port_addr = st->channel[n].port_addr; ++ int i, poked = 0; ++ for (i = 0; i < num_channels; i++) { ++ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ if (st->channel[i].hub_addr == hub_addr && ++ st->channel[i].port_addr == port_addr) { ++ switch (st->channel[i].fsm) { ++ case FIQ_PER_ISO_OUT_PENDING: ++ if (st->channel[i].nrpackets == 1) { ++ st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ fiq_fsm_restart_channel(st, i, 0); ++ poked = 1; ++ break; ++ ++ default: ++ break; ++ } ++ } ++ if (poked) ++ break; ++ } ++ return poked; ++} ++ ++/** ++ * fiq_fsm_tt_in_use() - search for host channels using this TT ++ * @n: Channel to use as reference ++ * ++ */ ++int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n) ++{ ++ int hub_addr = st->channel[n].hub_addr; ++ int port_addr = st->channel[n].port_addr; ++ int i, in_use = 0; ++ for (i = 0; i < num_channels; i++) { ++ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ switch (st->channel[i].fsm) { ++ /* TT is reserved for channels that are in the middle of a periodic ++ * split transaction. ++ */ ++ case FIQ_PER_SSPLIT_STARTED: ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ //case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ case FIQ_PER_ISO_OUT_LAST: ++ if (st->channel[i].hub_addr == hub_addr && ++ st->channel[i].port_addr == port_addr) { ++ in_use = 1; ++ } ++ break; ++ default: ++ break; ++ } ++ if (in_use) ++ break; ++ } ++ return in_use; ++} ++ ++/** ++ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need ++ * to be issued for this IN transaction. ++ * ++ * We cannot tell the inbound PID of a data packet due to hardware limitations. ++ * we need to make an educated guess as to whether we need to queue another CSPLIT ++ * or not. A no-brainer is when we have received enough data to fill the endpoint ++ * size, but for endpoints that give variable-length data then we have to resort ++ * to heuristics. ++ * ++ * We also return whether this is the last CSPLIT to be queued, again based on ++ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions. ++ * Note: requires at least 1 CSPLIT to have been performed prior to being called. ++ */ ++ ++/* ++ * We need some way of guaranteeing if a returned periodic packet of size X ++ * has a DATA0 PID. ++ * The heuristic value of 144 bytes assumes that the received data has maximal ++ * bit-stuffing and the clock frequency of the transmitting device is at the lowest ++ * permissible limit. If the transfer length results in a final packet size ++ * 144 < p <= 188, then an erroneous CSPLIT will be issued. ++ * Also used to ensure that an endpoint will nominally only return a single ++ * complete-split worth of data. ++ */ ++#define DATA0_PID_HEURISTIC 144 ++ ++static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last) ++{ ++ ++ int i; ++ int total_len = 0; ++ int more_needed = 1; ++ struct fiq_channel_state *st = &state->channel[n]; ++ ++ for (i = 0; i < st->dma_info.index; i++) { ++ total_len += st->dma_info.slot_len[i]; ++ } ++ ++ *probably_last = 0; ++ ++ if (st->hcchar_copy.b.eptype == 0x3) { ++ /* ++ * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data ++ * then this is definitely the last CSPLIT. ++ */ ++ *probably_last = 1; ++ } else { ++ /* Isoc IN. This is a bit risky if we are the first transaction: ++ * we may have been held off slightly. */ ++ if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) { ++ more_needed = 0; ++ } ++ /* If in the next uframe we will receive enough data to fill the endpoint, ++ * then only issue 1 more csplit. ++ */ ++ if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC) ++ *probably_last = 1; ++ } ++ ++ if (total_len >= st->hctsiz_copy.b.xfersize || ++ i == 6 || total_len == 0) ++ /* Note: due to bit stuffing it is possible to have > 6 CSPLITs for ++ * a single endpoint. Accepting more would completely break our scheduling mechanism though ++ * - in these extreme cases we will pass through a truncated packet. ++ */ ++ more_needed = 0; ++ ++ return more_needed; ++} ++ ++/** ++ * fiq_fsm_too_late() - Test transaction for lateness ++ * ++ * If a SSPLIT for a large IN transaction is issued too late in a frame, ++ * the hub will disable the port to the device and respond with ERR handshakes. ++ * The hub status endpoint will not reflect this change. ++ * Returns 1 if we will issue a SSPLIT that will result in a device babble. ++ */ ++int notrace fiq_fsm_too_late(struct fiq_state *st, int n) ++{ ++ int uframe; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ uframe = hfnum.b.frnum & 0x7; ++ if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) { ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ ++ ++/** ++ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline ++ * ++ * Search pending transactions in the start-split pending state and queue them. ++ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4). ++ * Note: we specifically don't do isochronous OUT transactions first because better ++ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT. ++ */ ++static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels) ++{ ++ int n; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ if ((hfnum.b.frnum & 0x7) == 5) ++ return; ++ for (n = 0; n < num_channels; n++) { ++ if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) { ++ /* Check to see if any other transactions are using this TT */ ++ if(!fiq_fsm_tt_in_use(st, num_channels, n)) { ++ if (!fiq_fsm_too_late(st, n)) { ++ st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; ++ fiq_print(FIQDBG_INT, st, "NEXTPER "); ++ fiq_fsm_restart_channel(st, n, 0); ++ } else { ++ st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ } ++ break; ++ } ++ } ++ } ++ for (n = 0; n < num_channels; n++) { ++ if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) { ++ if (!fiq_fsm_tt_in_use(st, num_channels, n)) { ++ fiq_print(FIQDBG_INT, st, "NEXTISO "); ++ st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ fiq_fsm_restart_channel(st, n, 0); ++ break; ++ } ++ } ++ } ++} ++ ++/** ++ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data ++ * @state: Pointer to fiq_state ++ * @n: Channel transaction is active on ++ * @hcint: Copy of host channel interrupt register ++ * ++ * Returns 0 if there are no more transactions for this HC to do, 1 ++ * otherwise. ++ */ ++static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint) ++{ ++ struct fiq_channel_state *st = &state->channel[n]; ++ int xfer_len = 0, nrpackets = 0; ++ hcdma_data_t hcdma; ++ fiq_print(FIQDBG_INT, state, "HSISO %02d", n); ++ ++ xfer_len = fiq_get_xfer_len(state, n); ++ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len; ++ ++ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32; ++ ++ st->hs_isoc_info.index++; ++ if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) { ++ return 0; ++ } ++ ++ /* grab the next DMA address offset from the array */ ++ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset; ++ FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ ++ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as ++ * the core needs to be told to send the correct number. Caution: for IN transfers, ++ * this is always set to the maximum size of the endpoint. */ ++ xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length; ++ /* Integer divide in a FIQ: fun. FIXME: make this not suck */ ++ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; ++ if (nrpackets == 0) ++ nrpackets = 1; ++ st->hcchar_copy.b.multicnt = nrpackets; ++ st->hctsiz_copy.b.pktcnt = nrpackets; ++ ++ /* Initial PID also needs to be set */ ++ if (st->hcchar_copy.b.epdir == 0) { ++ st->hctsiz_copy.b.xfersize = xfer_len; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_MDATA; ++ break; ++ } ++ ++ } else { ++ switch (st->hcchar_copy.b.multicnt) { ++ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA1; ++ break; ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA2; ++ break; ++ } ++ } ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32); ++ /* Channel is enabled on hcint handler exit */ ++ fiq_print(FIQDBG_INT, state, "HSISOOUT"); ++ return 1; ++} ++ ++ ++/** ++ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler ++ * @state: Pointer to the state struct passed from banked FIQ mode registers. ++ * @num_channels: set according to the DWC hardware configuration ++ * ++ * The SOF handler in FSM mode has two functions ++ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's ++ * nothing to do ++ * 2. Advance certain FSM states that require either a microframe delay, or a microframe ++ * of holdoff. ++ * ++ * The second part is architecture-specific to mach-bcm2835 - ++ * a sane interrupt controller would have a mask register for ARM interrupt sources ++ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt ++ * number (USB) can be enabled. This means that certain parts of the USB specification ++ * that require "wait a little while, then issue another packet" cannot be fulfilled with ++ * the timing granularity required to achieve optimal throughout. The workaround is to use ++ * the SOF "timer" (125uS) to perform this task. ++ */ ++static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels) ++{ ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) }; ++ int n; ++ int kick_irq = 0; ++ ++ if ((hfnum.b.frnum & 0x7) == 1) { ++ /* We cannot issue csplits for transactions in the last frame past (n+1).1 ++ * Check to see if there are any transactions that are stale. ++ * Boot them out. ++ */ ++ for (n = 0; n < num_channels; n++) { ++ switch (state->channel[n].fsm) { ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_CSPLIT_LAST: ++ /* Check if we are no longer in the same full-speed frame. */ ++ if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) < ++ (hfnum.b.frnum & ~0x7)) ++ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ break; ++ default: ++ break; ++ } ++ } ++ } ++ ++ for (n = 0; n < num_channels; n++) { ++ switch (state->channel[n].fsm) { ++ ++ case FIQ_NP_SSPLIT_RETRY: ++ case FIQ_NP_IN_CSPLIT_RETRY: ++ case FIQ_NP_OUT_CSPLIT_RETRY: ++ fiq_fsm_restart_channel(state, n, 0); ++ break; ++ ++ case FIQ_HS_ISOC_SLEEPING: ++ /* Is it time to wake this channel yet? */ ++ if (--state->channel[n].uframe_sleeps == 0) { ++ state->channel[n].fsm = FIQ_HS_ISOC_TURBO; ++ fiq_fsm_restart_channel(state, n, 0); ++ } ++ break; ++ ++ case FIQ_PER_SSPLIT_QUEUED: ++ if ((hfnum.b.frnum & 0x7) == 5) ++ break; ++ if(!fiq_fsm_tt_in_use(state, num_channels, n)) { ++ if (!fiq_fsm_too_late(state, n)) { ++ fiq_print(FIQDBG_INT, state, "SOF GO %01d", n); ++ fiq_fsm_restart_channel(state, n, 0); ++ state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ /* Transaction cannot be started without risking a device babble error */ ++ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ state->haintmsk_saved.b2.chint &= ~(1 << n); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); ++ kick_irq |= 1; ++ } ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_PENDING: ++ /* Ordinarily, this should be poked after the SSPLIT ++ * complete interrupt for a competing transfer on the same ++ * TT. Doesn't happen for aborted transactions though. ++ */ ++ if ((hfnum.b.frnum & 0x7) >= 5) ++ break; ++ if (!fiq_fsm_tt_in_use(state, num_channels, n)) { ++ /* Hardware bug. SOF can sometimes occur after the channel halt interrupt ++ * that caused this. ++ */ ++ fiq_fsm_restart_channel(state, n, 0); ++ fiq_print(FIQDBG_INT, state, "SOF ISOC"); ++ if (state->channel[n].nrpackets == 1) { ++ state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_WAIT: ++ /* we are guaranteed to be in this state if and only if the SSPLIT interrupt ++ * occurred when the bus transaction occurred. The SOF interrupt reversal bug ++ * will utterly bugger this up though. ++ */ ++ if (hfnum.b.frnum != state->channel[n].expected_uframe) { ++ fiq_print(FIQDBG_INT, state, "SOFCS %d ", n); ++ state->channel[n].fsm = FIQ_PER_CSPLIT_POLL; ++ fiq_fsm_restart_channel(state, n, 0); ++ fiq_fsm_start_next_periodic(state, num_channels); ++ ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ case FIQ_DEQUEUE_ISSUED: ++ /* Ugly: we have to force a HCD interrupt. ++ * Poke the mask for the channel in question. ++ * We will take a fake SOF because of this, but ++ * that's OK. ++ */ ++ state->haintmsk_saved.b2.chint &= ~(1 << n); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); ++ kick_irq |= 1; ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ if (state->kick_np_queues || ++ dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum)) ++ kick_irq |= 1; ++ ++ return !kick_irq; ++} ++ ++ ++/** ++ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler ++ * @state: Pointer to the FIQ state struct ++ * @num_channels: Number of channels as per hardware config ++ * @n: channel for which HAINT(i) was raised ++ * ++ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well. ++ */ ++static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n) ++{ ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcint_data_t hcint_probe; ++ hcchar_data_t hcchar; ++ int handled = 0; ++ int restart = 0; ++ int last_csplit = 0; ++ int start_next_periodic = 0; ++ struct fiq_channel_state *st = &state->channel[n]; ++ hfnum_data_t hfnum; ++ ++ hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT); ++ hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK); ++ hcint_probe.d32 = hcint.d32 & hcintmsk.d32; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) { ++ fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm); ++ fiq_print(FIQDBG_INT, state, "%08x", hcint.d32); ++ } ++ ++ switch (st->fsm) { ++ ++ case FIQ_PASSTHROUGH: ++ case FIQ_DEQUEUE_ISSUED: ++ /* doesn't belong to us, kick it upstairs */ ++ break; ++ ++ case FIQ_PASSTHROUGH_ERRORSTATE: ++ /* We are here to emulate the error recovery mechanism of the dwc HCD. ++ * Several interrupts are unmasked if a previous transaction failed - it's ++ * death for the FIQ to attempt to handle them as the channel isn't halted. ++ * Emulate what the HCD does in this situation: mask and continue. ++ * The FSM has no other state setup so this has to be handled out-of-band. ++ */ ++ fiq_print(FIQDBG_ERR, state, "ERRST %02d", n); ++ if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) { ++ fiq_print(FIQDBG_ERR, state, "RESET %02d", n); ++ /* In some random cases we can get a NAK interrupt coincident with a Xacterr ++ * interrupt, after the device has disappeared. ++ */ ++ if (!hcint.b.xacterr) ++ st->nr_errors = 0; ++ hcintmsk.b.nak = 0; ++ hcintmsk.b.ack = 0; ++ hcintmsk.b.datatglerr = 0; ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32); ++ return 1; ++ } ++ if (hcint_probe.b.chhltd) { ++ fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n); ++ fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32); ++ return 0; ++ } ++ break; ++ ++ /* Non-periodic state groups */ ++ case FIQ_NP_SSPLIT_STARTED: ++ case FIQ_NP_SSPLIT_RETRY: ++ /* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */ ++ if (hcint.b.ack) { ++ /* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction ++ * will start shortly. SOF needs to kick the transaction to prevent a NYET flood. ++ */ ++ if(st->hcchar_copy.b.epdir == 1) ++ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; ++ else ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ st->nr_errors = 0; ++ handled = 1; ++ fiq_fsm_setup_csplit(state, n); ++ } else if (hcint.b.nak) { ++ // No buffer space in TT. Retry on a uframe boundary. ++ st->fsm = FIQ_NP_SSPLIT_RETRY; ++ handled = 1; ++ } else if (hcint.b.xacterr) { ++ // The only other one we care about is xacterr. This implies HS bus error - retry. ++ st->nr_errors++; ++ st->fsm = FIQ_NP_SSPLIT_RETRY; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else { ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ handled = 0; ++ restart = 0; ++ } ++ break; ++ ++ case FIQ_NP_IN_CSPLIT_RETRY: ++ /* Received a CSPLIT done interrupt. ++ * Expected Data/NAK/STALL/NYET for IN. ++ */ ++ if (hcint.b.xfercomp) { ++ /* For IN, data is present. */ ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nak) { ++ /* no endpoint data. Punt it upstairs */ ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nyet) { ++ /* CSPLIT NYET - retry on a uframe boundary. */ ++ handled = 1; ++ st->nr_errors = 0; ++ } else if (hcint.b.datatglerr) { ++ /* data toggle errors do not set the xfercomp bit. */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else if (hcint.b.xacterr) { ++ /* HS error. Retry immediate */ ++ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else if (hcint.b.stall || hcint.b.bblerr) { ++ /* A STALL implies either a LS bus error or a genuine STALL. */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else { ++ /* Hardware bug. It's possible in some cases to ++ * get a channel halt with nothing else set when ++ * the response was a NYET. Treat as local 3-strikes retry. ++ */ ++ hcint_data_t hcint_test = hcint; ++ hcint_test.b.chhltd = 0; ++ if (!hcint_test.d32) { ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ } ++ } else { ++ /* Bail out if something unexpected happened */ ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } ++ } ++ break; ++ ++ case FIQ_NP_OUT_CSPLIT_RETRY: ++ /* Received a CSPLIT done interrupt. ++ * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/ ++ if (hcint.b.xfercomp) { ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nak) { ++ // The HCD will implement the holdoff on frame boundaries. ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nyet) { ++ // Hub still processing. ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ handled = 1; ++ st->nr_errors = 0; ++ //restart = 1; ++ } else if (hcint.b.xacterr) { ++ /* HS error. retry immediate */ ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else if (hcint.b.stall) { ++ /* LS bus error or genuine stall */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else { ++ /* ++ * Hardware bug. It's possible in some cases to get a ++ * channel halt with nothing else set when the response was a NYET. ++ * Treat as local 3-strikes retry. ++ */ ++ hcint_data_t hcint_test = hcint; ++ hcint_test.b.chhltd = 0; ++ if (!hcint_test.d32) { ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ } ++ } else { ++ // Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it. ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } ++ } ++ break; ++ ++ /* Periodic split states (except isoc out) */ ++ case FIQ_PER_SSPLIT_STARTED: ++ /* Expect an ACK or failure for SSPLIT */ ++ if (hcint.b.ack) { ++ /* ++ * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs. ++ * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1 ++ * point for microframe n-3, the packet will not appear on the bus until microframe n. ++ * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus ++ * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1 ++ * coincident with SOF for n+1. ++ * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place. ++ * These appear to be caused by timing/clock crossing bugs within the core itself. ++ * State machine workaround. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ fiq_fsm_setup_csplit(state, n); ++ /* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct ++ * time. If not, then we're in the next SOF. ++ */ ++ if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) { ++ fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n); ++ st->expected_uframe = hfnum.b.frnum; ++ st->fsm = FIQ_PER_CSPLIT_WAIT; ++ } else { ++ fiq_print(FIQDBG_INT, state, "CSPOL %01d", n); ++ /* For isochronous IN endpoints, ++ * we need to hold off if we are expecting a lot of data */ ++ if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) { ++ start_next_periodic = 1; ++ } ++ /* Danger will robinson: we are in a broken state. If our first interrupt after ++ * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable ++ * lag. Unmask the NYET interrupt. ++ */ ++ st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; ++ st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1; ++ restart = 1; ++ } ++ handled = 1; ++ } else if (hcint.b.xacterr) { ++ /* 3-strikes retry is enabled, we have hit our max nr_errors */ ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ start_next_periodic = 1; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ start_next_periodic = 1; ++ } ++ /* We can now queue the next isochronous OUT transaction, if one is pending. */ ++ if(fiq_fsm_tt_next_isoc(state, num_channels, n)) { ++ fiq_print(FIQDBG_INT, state, "NEXTISO "); ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_NYET1: ++ /* First CSPLIT attempt was a NYET. If we get a subsequent NYET, ++ * we are too late and the TT has dropped its CSPLIT fifo. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ start_next_periodic = 1; ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ st->fsm = FIQ_PER_CSPLIT_POLL; ++ st->nr_errors = 0; ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ handled = 1; ++ restart = 1; ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ /* Doh. Data lost. */ ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_BROKEN_NYET1: ++ /* ++ * we got here because our host channel is in the delayed-interrupt ++ * state and we cannot take a NYET interrupt any later than when it ++ * occurred. Disable then re-enable the channel if this happens to force ++ * CSPLITs to occur at the right time. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ fiq_print(FIQDBG_INT, state, "BROK: %01d ", n); ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ start_next_periodic = 1; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ st->fsm = FIQ_PER_CSPLIT_POLL; ++ handled = 1; ++ restart = 1; ++ start_next_periodic = 1; ++ /* Reload HCTSIZ for the next transfer */ ++ fiq_fsm_reload_hctsiz(state, n); ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ start_next_periodic = 1; ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ /* Local 3-strikes retry is handled by the core. This is a ERR response.*/ ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_POLL: ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ start_next_periodic = 1; ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ handled = 1; ++ restart = 1; ++ /* Reload HCTSIZ for the next transfer */ ++ fiq_fsm_reload_hctsiz(state, n); ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ /* Are we a NYET after the first data packet? */ ++ if (st->nrpackets == 0) { ++ st->fsm = FIQ_PER_CSPLIT_NYET1; ++ handled = 1; ++ restart = 1; ++ } else { ++ /* We got a NYET when polling CSPLITs. Can happen ++ * if our heuristic fails, or if someone disables us ++ * for any significant length of time. ++ */ ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ /* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/ ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_HS_ISOC_TURBO: ++ if (fiq_fsm_update_hs_isoc(state, n, hcint)) { ++ /* more transactions to come */ ++ handled = 1; ++ fiq_print(FIQDBG_INT, state, "HSISO M "); ++ /* For strided transfers, put ourselves to sleep */ ++ if (st->hs_isoc_info.stride > 1) { ++ st->uframe_sleeps = st->hs_isoc_info.stride - 1; ++ st->fsm = FIQ_HS_ISOC_SLEEPING; ++ } else { ++ restart = 1; ++ } ++ } else { ++ st->fsm = FIQ_HS_ISOC_DONE; ++ fiq_print(FIQDBG_INT, state, "HSISO F "); ++ } ++ break; ++ ++ case FIQ_HS_ISOC_ABORTED: ++ /* This abort is called by the driver rewriting the state mid-transaction ++ * which allows the dequeue mechanism to work more effectively. ++ */ ++ break; ++ ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ if (hcint.b.ack) { ++ if(fiq_iso_out_advance(state, num_channels, n)) { ++ /* last OUT transfer */ ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ /* ++ * Assuming the periodic FIFO in the dwc core ++ * actually does its job properly, we can queue ++ * the next ssplit now and in theory, the wire ++ * transactions will be in-order. ++ */ ++ // No it doesn't. It appears to process requests in host channel order. ++ //start_next_periodic = 1; ++ } ++ handled = 1; ++ restart = 1; ++ } else { ++ /* ++ * Isochronous transactions carry on regardless. Log the error ++ * and continue. ++ */ ++ //explode += 1; ++ st->nr_errors++; ++ if(fiq_iso_out_advance(state, num_channels, n)) { ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ //start_next_periodic = 1; ++ } ++ handled = 1; ++ restart = 1; ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_LAST: ++ if (hcint.b.ack) { ++ /* All done here */ ++ st->fsm = FIQ_PER_ISO_OUT_DONE; ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_DONE; ++ st->nr_errors++; ++ } ++ start_next_periodic = 1; ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ /* SOF kicked us because we overran. */ ++ start_next_periodic = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ if (handled) { ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32); ++ } else { ++ /* Copy the regs into the state so the IRQ knows what to do */ ++ st->hcint_copy.d32 = hcint.d32; ++ } ++ ++ if (restart) { ++ /* Restart always implies handled. */ ++ if (restart == 2) { ++ /* For complete-split INs, the show must go on. ++ * Force a channel restart */ ++ fiq_fsm_restart_channel(state, n, 1); ++ } else { ++ fiq_fsm_restart_channel(state, n, 0); ++ } ++ } ++ if (start_next_periodic) { ++ fiq_fsm_start_next_periodic(state, num_channels); ++ } ++ if (st->fsm != FIQ_PASSTHROUGH) ++ fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm); ++ ++ return handled; ++} ++ ++ ++/** ++ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ ++ * @state: pointer to state struct passed from the banked FIQ mode registers. ++ * @num_channels: set according to the DWC hardware configuration ++ * @dma: pointer to DMA bounce buffers for split transaction slots ++ * ++ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode ++ * inside an EHCI or similar host controller regarding split transactions. The DWC core ++ * interrupts each and every time a split transaction packet is received or sent successfully. ++ * This results in either an interrupt storm when everything is working "properly", or ++ * the interrupt latency of the system in general breaks time-sensitive periodic split ++ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ ++ * solves these problems. ++ * ++ * Return: void ++ */ ++void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels) ++{ ++ gintsts_data_t gintsts, gintsts_handled; ++ gintmsk_data_t gintmsk; ++ //hfnum_data_t hfnum; ++ haint_data_t haint, haint_handled; ++ haintmsk_data_t haintmsk; ++ int kick_irq = 0; ++ ++ gintsts_handled.d32 = 0; ++ haint_handled.d32 = 0; ++ ++ fiq_fsm_spin_lock(&state->lock); ++ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); ++ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); ++ gintsts.d32 &= gintmsk.d32; ++ ++ if (gintsts.b.sofintr) { ++ /* For FSM mode, SOF is required to keep the state machine advance for ++ * certain stages of the periodic pipeline. It's death to mask this ++ * interrupt in that case. ++ */ ++ ++ if (!fiq_fsm_do_sof(state, num_channels)) { ++ /* Kick IRQ once. Queue advancement means that all pending transactions ++ * will get serviced when the IRQ finally executes. ++ */ ++ if (state->gintmsk_saved.b.sofintr == 1) ++ kick_irq |= 1; ++ state->gintmsk_saved.b.sofintr = 0; ++ } ++ gintsts_handled.b.sofintr = 1; ++ } ++ ++ if (gintsts.b.hcintr) { ++ int i; ++ haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT); ++ haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK); ++ haint.d32 &= haintmsk.d32; ++ haint_handled.d32 = 0; ++ for (i=0; ihaintmsk_saved.b2.chint &= ~(1 << i); ++ } else { ++ /* do_hcintr cleaned up after itself, but clear haint */ ++ haint_handled.b2.chint |= (1 << i); ++ } ++ } ++ } ++ ++ if (haint_handled.b2.chint) { ++ FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32); ++ } ++ ++ if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) { ++ /* ++ * This is necessary to avoid multiple retriggers of the MPHI in the case ++ * where interrupts are held off and HCINTs start to pile up. ++ * Only wake up the IRQ if a new interrupt came in, was not handled and was ++ * masked. ++ */ ++ haintmsk.d32 &= state->haintmsk_saved.d32; ++ FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32); ++ kick_irq |= 1; ++ } ++ /* Top-Level interrupt - always handled because it's level-sensitive */ ++ gintsts_handled.b.hcintr = 1; ++ } ++ ++ ++ /* Clear the bits in the saved register that were not handled but were triggered. */ ++ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); ++ ++ /* FIQ didn't handle something - mask has changed - write new mask */ ++ if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) { ++ gintmsk.d32 &= state->gintmsk_saved.d32; ++ gintmsk.b.sofintr = 1; ++ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); ++// fiq_print(FIQDBG_INT, state, "KICKGINT"); ++// fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32); ++// fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32); ++ kick_irq |= 1; ++ } ++ ++ if (gintsts_handled.d32) { ++ /* Only applies to edge-sensitive bits in GINTSTS */ ++ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); ++ } ++ ++ /* We got an interrupt, didn't handle it. */ ++ if (kick_irq) { ++ state->mphi_int_count++; ++ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ ++ } ++ state->fiq_done++; ++ mb(); ++ fiq_fsm_spin_unlock(&state->lock); ++} ++ ++ ++/** ++ * dwc_otg_fiq_nop() - FIQ "lite" ++ * @state: pointer to state struct passed from the banked FIQ mode registers. ++ * ++ * The "nop" handler does not intervene on any interrupts other than SOF. ++ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals ++ * with non-periodic/periodic queues) needs to be kicked. ++ * ++ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second. ++ * ++ * Return: void ++ */ ++void notrace dwc_otg_fiq_nop(struct fiq_state *state) ++{ ++ gintsts_data_t gintsts, gintsts_handled; ++ gintmsk_data_t gintmsk; ++ hfnum_data_t hfnum; ++ ++ fiq_fsm_spin_lock(&state->lock); ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); ++ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); ++ gintsts.d32 &= gintmsk.d32; ++ gintsts_handled.d32 = 0; ++ ++ if (gintsts.b.sofintr) { ++ if (!state->kick_np_queues && ++ dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) { ++ /* SOF handled, no work to do, just ACK interrupt */ ++ gintsts_handled.b.sofintr = 1; ++ } else { ++ /* Kick IRQ */ ++ state->gintmsk_saved.b.sofintr = 0; ++ } ++ } ++ ++ /* Reset handled interrupts */ ++ if(gintsts_handled.d32) { ++ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); ++ } ++ ++ /* Clear the bits in the saved register that were not handled but were triggered. */ ++ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); ++ ++ /* We got an interrupt, didn't handle it and want to mask it */ ++ if (~(state->gintmsk_saved.d32)) { ++ state->mphi_int_count++; ++ gintmsk.d32 &= state->gintmsk_saved.d32; ++ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); ++ /* Force a clear before another dummy send */ ++ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); ++ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ ++ } ++ state->fiq_done++; ++ mb(); ++ fiq_fsm_spin_unlock(&state->lock); ++} +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +new file mode 100644 +index 000000000000..f9fddfbcffb3 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -0,0 +1,370 @@ ++/* ++ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * This FIQ implements functionality that performs split transactions on ++ * the dwc_otg hardware without any outside intervention. A split transaction ++ * is "queued" by nominating a specific host channel to perform the entirety ++ * of a split transaction. This FIQ will then perform the microframe-precise ++ * scheduling required in each phase of the transaction until completion. ++ * ++ * The FIQ functionality has been surgically implanted into the Synopsys ++ * vendor-provided driver. ++ * ++ */ ++ ++#ifndef DWC_OTG_FIQ_FSM_H_ ++#define DWC_OTG_FIQ_FSM_H_ ++ ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_hcd.h" ++#include ++#include ++#include ++#include ++ ++#if 0 ++#define FLAME_ON(x) \ ++do { \ ++ int gpioreg; \ ++ \ ++ gpioreg = readl(__io_address(0x20200000+0x8)); \ ++ gpioreg &= ~(7 << (x-20)*3); \ ++ gpioreg |= 0x1 << (x-20)*3; \ ++ writel(gpioreg, __io_address(0x20200000+0x8)); \ ++ \ ++ writel(1< 1, SOF wakes up the isochronous FSM */ ++ FIQ_HS_ISOC_SLEEPING = 24, ++ FIQ_HS_ISOC_DONE = 25, ++ FIQ_HS_ISOC_ABORTED = 26, ++ FIQ_DEQUEUE_ISSUED = 30, ++ FIQ_TEST = 32, ++}; ++ ++struct fiq_stack { ++ int magic1; ++ uint8_t stack[2048]; ++ int magic2; ++}; ++ ++ ++/** ++ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel) ++ * @index: Number of slots reported used for IN transactions / number of slots ++ * transmitted for an OUT transaction ++ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused) ++ * ++ * Split transaction transfers can have variable length depending on other bus ++ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore ++ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers ++ * can happen per-frame. ++ */ ++struct fiq_dma_info { ++ u8 index; ++ u8 slot_len[6]; ++}; ++ ++struct __attribute__((packed)) fiq_split_dma_slot { ++ u8 buf[188]; ++}; ++ ++struct fiq_dma_channel { ++ struct __attribute__((packed)) fiq_split_dma_slot index[6]; ++}; ++ ++struct fiq_dma_blob { ++ struct __attribute__((packed)) fiq_dma_channel channel[0]; ++}; ++ ++/** ++ * struct fiq_hs_isoc_info - USB2.0 isochronous data ++ * @iso_frame: Pointer to the array of OTG URB iso_frame_descs. ++ * @nrframes: Total length of iso_frame_desc array ++ * @index: Current index (FIQ-maintained) ++ * @stride: Interval in uframes between HS isoc transactions ++ */ ++struct fiq_hs_isoc_info { ++ struct dwc_otg_hcd_iso_packet_desc *iso_desc; ++ unsigned int nrframes; ++ unsigned int index; ++ unsigned int stride; ++}; ++ ++/** ++ * struct fiq_channel_state - FIQ state machine storage ++ * @fsm: Current state of the channel as understood by the FIQ ++ * @nr_errors: Number of transaction errors on this split-transaction ++ * @hub_addr: SSPLIT/CSPLIT destination hub ++ * @port_addr: SSPLIT/CSPLIT destination port - always 1 if single TT hub ++ * @nrpackets: For isoc OUT, the number of split-OUT packets to transmit. For ++ * split-IN, number of CSPLIT data packets that were received. ++ * @hcchar_copy: ++ * @hcsplt_copy: ++ * @hcintmsk_copy: ++ * @hctsiz_copy: Copies of the host channel registers. ++ * For use as scratch, or for returning state. ++ * ++ * The fiq_channel_state is state storage between interrupts for a host channel. The ++ * FSM state is stored here. Members of this structure must only be set up by the ++ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ ++ * has updated the state to either a COMPLETE state group or ABORT state group. ++ */ ++ ++struct fiq_channel_state { ++ enum fiq_fsm_state fsm; ++ unsigned int nr_errors; ++ unsigned int hub_addr; ++ unsigned int port_addr; ++ /* Hardware bug workaround: sometimes channel halt interrupts are ++ * delayed until the next SOF. Keep track of when we expected to get interrupted. */ ++ unsigned int expected_uframe; ++ /* number of uframes remaining (for interval > 1 HS isoc transfers) before next transfer */ ++ unsigned int uframe_sleeps; ++ /* in/out for communicating number of dma buffers used, or number of ISOC to do */ ++ unsigned int nrpackets; ++ struct fiq_dma_info dma_info; ++ struct fiq_hs_isoc_info hs_isoc_info; ++ /* Copies of HC registers - in/out communication from/to IRQ handler ++ * and for ease of channel setup. A bit of mungeing is performed - for ++ * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint. ++ */ ++ hcchar_data_t hcchar_copy; ++ hcsplt_data_t hcsplt_copy; ++ hcint_data_t hcint_copy; ++ hcintmsk_data_t hcintmsk_copy; ++ hctsiz_data_t hctsiz_copy; ++ hcdma_data_t hcdma_copy; ++}; ++ ++/** ++ * struct fiq_state - top-level FIQ state machine storage ++ * @mphi_regs: virtual address of the MPHI peripheral register file ++ * @dwc_regs_base: virtual address of the base of the DWC core register file ++ * @dma_base: physical address for the base of the DMA bounce buffers ++ * @dummy_send: Scratch area for sending a fake message to the MPHI peripheral ++ * @gintmsk_saved: Top-level mask of interrupts that the FIQ has not handled. ++ * Used for determining which interrupts fired to set off the IRQ handler. ++ * @haintmsk_saved: Mask of interrupts from host channels that the FIQ did not handle internally. ++ * @np_count: Non-periodic transactions in the active queue ++ * @np_sent: Count of non-periodic transactions that have completed ++ * @next_sched_frame: For periodic transactions handled by the driver's SOF-driven queuing mechanism, ++ * this is the next frame on which a SOF interrupt is required. Used to hold off ++ * passing SOF through to the driver until necessary. ++ * @channel[n]: Per-channel FIQ state. Allocated during init depending on the number of host ++ * channels configured into the core logic. ++ * ++ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub. ++ * It contains top-level state information. ++ */ ++struct fiq_state { ++ fiq_lock_t lock; ++ mphi_regs_t mphi_regs; ++ void *dwc_regs_base; ++ dma_addr_t dma_base; ++ struct fiq_dma_blob *fiq_dmab; ++ void *dummy_send; ++ gintmsk_data_t gintmsk_saved; ++ haintmsk_data_t haintmsk_saved; ++ int mphi_int_count; ++ unsigned int fiq_done; ++ unsigned int kick_np_queues; ++ unsigned int next_sched_frame; ++#ifdef FIQ_DEBUG ++ char * buffer; ++ unsigned int bufsiz; ++#endif ++ struct fiq_channel_state channel[0]; ++}; ++ ++extern void fiq_fsm_spin_lock(fiq_lock_t *lock); ++ ++extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); ++ ++extern int fiq_fsm_too_late(struct fiq_state *st, int n); ++ ++extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n); ++ ++extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels); ++ ++extern void dwc_otg_fiq_nop(struct fiq_state *state); ++ ++#endif /* DWC_OTG_FIQ_FSM_H_ */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S +new file mode 100644 +index 000000000000..ffa8d21bc61e +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S +@@ -0,0 +1,80 @@ ++/* ++ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++#include ++#include ++ ++ ++.text ++ ++.global _dwc_otg_fiq_stub_end; ++ ++/** ++ * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow ++ * a C-style function call with arguments from the FIQ banked registers. ++ * r0 = &hcd->fiq_state ++ * r1 = &hcd->num_channels ++ * r2 = &hcd->dma_buffers ++ * Tramples: r0, r1, r2, r4, fp, ip ++ */ ++ ++ENTRY(_dwc_otg_fiq_stub) ++ /* Stash unbanked regs - SP will have been set up for us */ ++ mov ip, sp; ++ stmdb sp!, {r0-r12, lr}; ++#ifdef FIQ_DEBUG ++ // Cycle profiling - read cycle counter at start ++ mrc p15, 0, r5, c15, c12, 1; ++#endif ++ /* r11 = fp, don't trample it */ ++ mov r4, fp; ++ /* set EABI frame size */ ++ sub fp, ip, #512; ++ ++ /* for fiq NOP mode - just need state */ ++ mov r0, r8; ++ /* r9 = num_channels */ ++ mov r1, r9; ++ /* r10 = struct *dma_bufs */ ++// mov r2, r10; ++ ++ /* r4 = &fiq_c_function */ ++ blx r4; ++#ifdef FIQ_DEBUG ++ mrc p15, 0, r4, c15, c12, 1; ++ subs r5, r5, r4; ++ // r5 is now the cycle count time for executing the FIQ. Store it somewhere? ++#endif ++ ldmia sp!, {r0-r12, lr}; ++ subs pc, lr, #4; ++_dwc_otg_fiq_stub_end: ++END(_dwc_otg_fiq_stub) +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +new file mode 100644 +index 000000000000..027414bb2bf9 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -0,0 +1,4260 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ ++ * $Revision: #104 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file implements HCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * Interface provided by HCD Core is defined in ++ * header file. ++ */ ++ ++#include ++#include ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_fiq_fsm.h" ++ ++extern bool microframe_schedule; ++extern uint16_t fiq_fsm_mask, nak_holdoff; ++ ++//#define DEBUG_HOST_CHANNELS ++#ifdef DEBUG_HOST_CHANNELS ++static int last_sel_trans_num_per_scheduled = 0; ++static int last_sel_trans_num_nonper_scheduled = 0; ++static int last_sel_trans_num_avail_hc_at_start = 0; ++static int last_sel_trans_num_avail_hc_at_end = 0; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ ++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) ++{ ++ return DWC_ALLOC(sizeof(dwc_otg_hcd_t)); ++} ++ ++/** ++ * Connection timeout function. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. ++ */ ++void dwc_otg_hcd_connect_timeout(void *ptr) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); ++ DWC_PRINTF("Connect Timeout\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++} ++ ++#if defined(DEBUG) ++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ if (qh->channel != NULL) { ++ dwc_hc_t *hc = qh->channel; ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh_item; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ int i; ++ ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ ++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_PRINTF(" Assigned to channel %p:\n", hc); ++ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, ++ hcsplt.d32); ++ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, ++ hcdma); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ DWC_PRINTF(" NP inactive sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" NP active sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" Channels: \n"); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" %2d: %p\n", i, hc); ++ } ++ } ++} ++#else ++#define dump_channel_info(hcd, qh) ++#endif /* DEBUG */ ++ ++/** ++ * Work queue function for starting the HCD when A-Cable is connected. ++ * The hcd_start() must be called in a process context. ++ */ ++static void hcd_start_func(void *_vp) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); ++ if (hcd) { ++ hcd->fops->start(hcd); ++ } ++} ++ ++static void del_xfer_timers(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int i; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++} ++ ++static void del_timers(dwc_otg_hcd_t * hcd) ++{ ++ del_xfer_timers(hcd); ++ DWC_TIMER_CANCEL(hcd->conn_timer); ++} ++ ++/** ++ * Processes all the URBs in a single list of QHs. Completes them with ++ * -ESHUTDOWN and frees the QTD. ++ */ ++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *qh_item, *qh_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ ++ DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { ++ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, ++ &qh->qtd_list, qtd_list_entry) { ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ if (qtd->urb != NULL) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_SHUTDOWN); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ ++ } ++ if(qh->channel) { ++ /* Using hcchar.chen == 1 is not a reliable test. ++ * It is possible that the channel has already halted ++ * but not yet been through the IRQ handler. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ if(microframe_schedule) ++ hcd->available_host_channels++; ++ qh->channel = NULL; ++ } ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++} ++ ++/** ++ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic ++ * and periodic schedules. The QTD associated with each URB is removed from ++ * the schedule and freed. This function may be called when a disconnect is ++ * detected or when the HCD is being stopped. ++ */ ++static void kill_all_urbs(dwc_otg_hcd_t * hcd) ++{ ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); ++} ++ ++/** ++ * Start the connection timer. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. The ++ * timer is deleted if a port connect interrupt occurs before the ++ * timer expires. ++ */ ++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) ++{ ++ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_session_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd = p; ++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); ++ return 1; ++} ++ ++/** ++ * HCD Callback function for starting the HCD when A-Cable is ++ * connected. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ dwc_otg_core_if_t *core_if; ++ hprt0_data_t hprt0; ++ ++ core_if = dwc_otg_hcd->core_if; ++ ++ if (core_if->op_state == B_HOST) { ++ /* ++ * Reset the port. During a HNP mode switch the reset ++ * needs to occur within 1ms and have a duration of at ++ * least 50ms. ++ */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, ++ hcd_start_func, dwc_otg_hcd, 50, ++ "start hcd"); ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_disconnect_cb(void *p) ++{ ++ gintsts_data_t intr; ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ /* ++ * Set status flags for the hub driver. ++ */ ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 0; ++ if(fiq_enable) ++ local_fiq_disable(); ++ /* ++ * Shutdown any transfers in process by clearing the Tx FIFO Empty ++ * interrupt mask and status bits and disabling subsequent host ++ * channel interrupts. ++ */ ++ intr.d32 = 0; ++ intr.b.nptxfempty = 1; ++ intr.b.ptxfempty = 1; ++ intr.b.hcintr = 1; ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, ++ intr.d32, 0); ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, ++ intr.d32, 0); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* ++ * Turn off the vbus power only if the core has transitioned to device ++ * mode. If still in host mode, need to keep power on to detect a ++ * reconnection. ++ */ ++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { ++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ DWC_PRINTF("Disconnect: PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ } ++ ++ /* Respond with an error status to all URBs in the schedule. */ ++ kill_all_urbs(dwc_otg_hcd); ++ ++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { ++ /* Clean up any host channels that were in use. */ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ /* Flush out any channel requests in slave mode. */ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY ++ (channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if-> ++ host_if->hc_regs[i]; ++ hcchar.d32 = ++ DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32 ++ (&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ } ++ } ++ } ++ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ /* Halt the channel. */ ++ hcchar.b.chdis = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ ++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, ++ channel); ++ DWC_CIRCLEQ_INSERT_TAIL ++ (&dwc_otg_hcd->free_hc_list, channel, ++ hc_list_entry); ++ /* ++ * Added for Descriptor DMA to prevent channel double cleanup ++ * in release_channel_ddma(). Which called from ep_disable ++ * when device disconnect. ++ */ ++ channel->qh = NULL; ++ } ++ } ++ if(fiq_fsm_enable) { ++ for(i=0; i < 128; i++) { ++ dwc_otg_hcd->hub_port[i] = 0; ++ } ++ } ++ ++ } ++ ++ if(fiq_enable) ++ local_fiq_enable(); ++ ++ if (dwc_otg_hcd->fops->disconnect) { ++ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); ++ } ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for stopping the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_stop_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * HCD Callback function for sleep of HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_sleep_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ dwc_otg_hcd_free_hc_from_lpm(hcd); ++ ++ return 0; ++} ++#endif ++ ++ ++/** ++ * HCD Callback function for Remote Wakeup. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_rem_wakeup_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ if (hcd->core_if->lx_state == DWC_OTG_L2) { ++ hcd->flags.b.port_suspend_change = 1; ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ else { ++ hcd->flags.b.port_l1_change = 1; ++ } ++#endif ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); ++ ++ /* ++ * The root hub should be disconnected before this function is called. ++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) ++ * and the QH lists (via ..._hcd_endpoint_disable). ++ */ ++ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ /* Turn off the vbus power */ ++ DWC_PRINTF("PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(1); ++} ++ ++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle, ++ int atomic_alloc) ++{ ++ int retval = 0; ++ uint8_t needs_scheduling = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qtd_t *qtd; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ hprt0_data_t hprt0 = { .d32 = 0 }; ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (NULL == hcd->core_if) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); ++ /* No longer connected. */ ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (!hcd->flags.b.port_connect_status) { ++ /* No longer connected. */ ++ DWC_ERROR("Not connected\n"); ++ return -DWC_E_NO_DEVICE; ++ } ++ ++ /* Some core configurations cannot support LS traffic on a FS root port */ ++ if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) && ++ (hcd->core_if->hwcfg2.b.fs_phy_type == 1) && ++ (hcd->core_if->hwcfg2.b.hs_phy_type == 1)) { ++ hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ return -DWC_E_NO_DEVICE; ++ } ++ } ++ ++ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc); ++ if (qtd == NULL) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (qtd->urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (qtd->urb->priv == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#endif ++ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk); ++ if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1; ++ if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) ++ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */ ++ needs_scheduling = 0; ++ ++ retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc); ++ // creates a new queue in ep_handle if it doesn't exist already ++ if (retval < 0) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " ++ "Error status %d\n", retval); ++ dwc_otg_hcd_qtd_free(qtd); ++ return retval; ++ } ++ ++ if(needs_scheduling) { ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ } ++ return retval; ++} ++ ++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *urb_qtd; ++ BUG_ON(!hcd); ++ BUG_ON(!dwc_otg_urb); ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ ++ if (hcd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb->qtd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); ++ return -DWC_E_INVALID; ++ } ++ urb_qtd = dwc_otg_urb->qtd; ++ BUG_ON(!urb_qtd); ++ if (urb_qtd->qh == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); ++ return -DWC_E_INVALID; ++ } ++#else ++ urb_qtd = dwc_otg_urb->qtd; ++ BUG_ON(!urb_qtd); ++#endif ++ qh = urb_qtd->qh; ++ BUG_ON(!qh); ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ if (urb_qtd->in_process) { ++ dump_channel_info(hcd, qh); ++ } ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (hcd->core_if == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (urb_qtd->in_process && qh->channel) { ++ /* The QTD is in process (it has been assigned to a channel). */ ++ if (hcd->flags.b.port_connect_status) { ++ int n = qh->channel->hc_num; ++ /* ++ * If still connected (i.e. in host mode), halt the ++ * channel so it can be used for other transfers. If ++ * no longer connected, the host registers can't be ++ * written to halt the channel since the core is in ++ * device mode. ++ */ ++ /* In FIQ FSM mode, we need to shut down carefully. ++ * The FIQ may attempt to restart a disabled channel */ ++ if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { ++ qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; ++ qh->channel->halt_pending = 1; ++ hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED; ++ } else { ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ } ++ } ++ } ++ ++ /* ++ * Free the QTD and clean up the associated QH. Leave the QH in the ++ * schedule if it has any remaining QTDs. ++ */ ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " ++ "delete %sQueue handler\n", ++ hcd->core_if->dma_desc_enable?"DMA ":""); ++ if (!hcd->core_if->dma_desc_enable) { ++ uint8_t b = urb_qtd->in_process; ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ if (b) { ++ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); ++ qh->channel = NULL; ++ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++ } else { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ } ++ return 0; ++} ++ ++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int retval = 0; ++ dwc_irqflags_t flags; ++ ++ if (retry < 0) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ if (!qh) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ retry--; ++ dwc_msleep(5); ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ /* ++ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove ++ * and qh_free to prevent stack dump on DWC_DMA_FREE() with ++ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() ++ * and dwc_otg_hcd_frame_list_alloc(). ++ */ ++ dwc_otg_hcd_qh_free(hcd, qh); ++ ++done: ++ return retval; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int retval = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ if (!qh) ++ return -DWC_E_INVALID; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ return retval; ++} ++#endif ++ ++/** ++ * HCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { ++ .start = dwc_otg_hcd_start_cb, ++ .stop = dwc_otg_hcd_stop_cb, ++ .disconnect = dwc_otg_hcd_disconnect_cb, ++ .session_start = dwc_otg_hcd_session_start_cb, ++ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .sleep = dwc_otg_hcd_sleep_cb, ++#endif ++ .p = 0, ++}; ++ ++/** ++ * Reset tasklet function ++ */ ++static void reset_tasklet_func(void *data) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(60); ++ ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++} ++ ++static void completion_tasklet_func(void *ptr) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr; ++ struct urb *urb; ++ urb_tq_entry_t *item; ++ dwc_irqflags_t flags; ++ ++ /* This could just be spin_lock_irq */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) { ++ item = DWC_TAILQ_FIRST(&hcd->completed_urb_list); ++ urb = item->urb; ++ DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item, ++ urb_tq_entries); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ DWC_FREE(item); ++ ++ usb_hcd_giveback_urb(hcd->priv, urb, urb->status); ++ ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ return; ++} ++ ++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh; ++ dwc_irqflags_t flags; ++ ++ if (!qh_list->next) { ++ /* The list hasn't been initialized yet. */ ++ return; ++ } ++ /* ++ * Hold spinlock here. Not needed in that case if bellow ++ * function is being called from ISR ++ */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ /* Ensure there are no QTDs or URBs left. */ ++ kill_urbs_in_qh_list(hcd, qh_list); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ DWC_LIST_FOREACH(item, qh_list) { ++ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ dwc_otg_hcd_qh_remove_and_free(hcd, qh); ++ } ++} ++ ++/** ++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable ++ * Device during SRP time by host power up. ++ */ ++void dwc_otg_hcd_power_up(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Enable VBUS */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++} ++ ++void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num) ++{ ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ struct fiq_dma_blob *blob = hcd->fiq_dmab; ++ int i; ++ ++ st->fsm = FIQ_PASSTHROUGH; ++ st->hcchar_copy.d32 = 0; ++ st->hcsplt_copy.d32 = 0; ++ st->hcint_copy.d32 = 0; ++ st->hcintmsk_copy.d32 = 0; ++ st->hctsiz_copy.d32 = 0; ++ st->hcdma_copy.d32 = 0; ++ st->nr_errors = 0; ++ st->hub_addr = 0; ++ st->port_addr = 0; ++ st->expected_uframe = 0; ++ st->nrpackets = 0; ++ st->dma_info.index = 0; ++ for (i = 0; i < 6; i++) ++ st->dma_info.slot_len[i] = 255; ++ st->hs_isoc_info.index = 0; ++ st->hs_isoc_info.iso_desc = NULL; ++ st->hs_isoc_info.nrframes = 0; ++ ++ DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128); ++} ++ ++/** ++ * Frees secondary storage associated with the dwc_otg_hcd structure contained ++ * in the struct usb_hcd field. ++ */ ++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(dwc_otg_hcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* Free memory for QH/QTD lists */ ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); ++ ++ /* Free memory for the host channels. */ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; ++ ++#ifdef DEBUG ++ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++ if (hc != NULL) { ++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", ++ i, hc); ++ DWC_FREE(hc); ++ } ++ } ++ ++ if (dwc_otg_hcd->core_if->dma_enable) { ++ if (dwc_otg_hcd->status_buf_dma) { ++ DWC_DMA_FREE(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, ++ dwc_otg_hcd->status_buf, ++ dwc_otg_hcd->status_buf_dma); ++ } ++ } else if (dwc_otg_hcd->status_buf != NULL) { ++ DWC_FREE(dwc_otg_hcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock); ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ dwc_otg_hcd->core_if->lock = NULL; ++ ++ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); ++ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); ++ DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); ++ DWC_FREE(dwc_otg_hcd->fiq_state); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (dwc_otg_hcd->core_if->power_down == 2 && ++ dwc_otg_hcd->core_if->pwron_timer) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer); ++ } ++#endif ++ DWC_FREE(dwc_otg_hcd); ++} ++ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd); ++ ++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->lock); ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->channel_lock); ++#else ++ hcd->lock = DWC_SPINLOCK_ALLOC(); ++ hcd->channel_lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", ++ hcd, core_if); ++ if (!hcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(hcd); ++ retval = -DWC_E_NO_MEMORY; ++ goto out; ++ } ++ hcd->core_if = core_if; ++ ++ /* Register the HCD CIL Callbacks */ ++ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, ++ &hcd_cil_callbacks, hcd); ++ ++ /* Initialize the non-periodic schedule. */ ++ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->non_periodic_sched_active); ++ ++ /* Initialize the periodic schedule. */ ++ DWC_LIST_INIT(&hcd->periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->periodic_sched_ready); ++ DWC_LIST_INIT(&hcd->periodic_sched_assigned); ++ DWC_LIST_INIT(&hcd->periodic_sched_queued); ++ DWC_TAILQ_INIT(&hcd->completed_urb_list); ++ /* ++ * Create a host channel descriptor for each host channel implemented ++ * in the controller. Initialize the channel descriptor array. ++ */ ++ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); ++ for (i = 0; i < num_channels; i++) { ++ channel = DWC_ALLOC(sizeof(dwc_hc_t)); ++ if (channel == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: host channel allocation failed\n", ++ __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ channel->hc_num = i; ++ hcd->hc_ptr_array[i] = channel; ++#ifdef DEBUG ++ hcd->core_if->hc_xfer_timer[i] = ++ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, ++ &hcd->core_if->hc_xfer_info[i]); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, ++ channel); ++ } ++ ++ if (fiq_enable) { ++ hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)); ++ if (!hcd->fiq_state) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); ++ ++ for (i = 0; i < num_channels; i++) { ++ hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; ++ } ++ hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); ++ ++ hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); ++ if (!hcd->fiq_stack) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ hcd->fiq_stack->magic1 = 0xDEADBEEF; ++ hcd->fiq_stack->magic2 = 0xD00DFEED; ++ hcd->fiq_state->gintmsk_saved.d32 = ~0; ++ hcd->fiq_state->haintmsk_saved.b2.chint = ~0; ++ ++ /* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools ++ * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels) ++ * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some ++ * moderately readable array casts. ++ */ ++ hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); ++ DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", ++ (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, ++ sizeof(struct fiq_dma_channel) * num_channels); ++ ++ DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); ++ ++ /* pointer for debug in fiq_print */ ++ hcd->fiq_state->fiq_dmab = hcd->fiq_dmab; ++ if (fiq_fsm_enable) { ++ int i; ++ for (i=0; i < hcd->core_if->core_params->host_channels; i++) { ++ dwc_otg_cleanup_fiq_channel(hcd, i); ++ } ++ DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s%s", ++ (fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "", ++ (fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "", ++ (fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "", ++ (fiq_fsm_mask & 0x8) ? "Interrupt/Control Split Transaction hack enabled\n" : ""); ++ } ++ } ++ ++ /* Initialize the Connection timeout timer. */ ++ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", ++ dwc_otg_hcd_connect_timeout, 0); ++ ++ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled"); ++ if (microframe_schedule) ++ init_hcd_usecs(hcd); ++ ++ /* Initialize reset tasklet. */ ++ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd); ++ ++ hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet", ++ completion_tasklet_func, hcd); ++#ifdef DWC_DEV_SRPCAP ++ if (hcd->core_if->power_down == 2) { ++ /* Initialize Power on timer for Host power up in case hibernation */ ++ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER", ++ dwc_otg_hcd_power_up, core_if); ++ } ++#endif ++ ++ /* ++ * Allocate space for storing data on status transactions. Normally no ++ * data is sent, but this space acts as a bit bucket. This must be ++ * done after usb_add_hcd since that function allocates the DMA buffer ++ * pool. ++ */ ++ if (hcd->core_if->dma_enable) { ++ hcd->status_buf = ++ DWC_DMA_ALLOC(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, ++ &hcd->status_buf_dma); ++ } else { ++ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE); ++ } ++ if (!hcd->status_buf) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: status_buf allocation failed\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ ++ hcd->otg_port = 1; ++ hcd->frame_list = NULL; ++ hcd->frame_list_dma = 0; ++ hcd->periodic_qh_count = 0; ++ ++ DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port)); ++#ifdef FIQ_DEBUG ++ DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc)); ++#endif ++ ++out: ++ return retval; ++} ++ ++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) ++{ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ dwc_otg_hcd_free(hcd); ++} ++ ++/** ++ * Initializes dynamic portions of the DWC_otg HCD state. ++ */ ++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) ++{ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_hc_t *channel_tmp; ++ ++ hcd->flags.d32 = 0; ++ ++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; ++ if (!microframe_schedule) { ++ hcd->non_periodic_channels = 0; ++ hcd->periodic_channels = 0; ++ } else { ++ hcd->available_host_channels = hcd->core_if->core_params->host_channels; ++ } ++ /* ++ * Put all channels in the free channel list and clean up channel ++ * states. ++ */ ++ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, ++ &hcd->free_hc_list, hc_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); ++ } ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ channel = hcd->hc_ptr_array[i]; ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, ++ hc_list_entry); ++ dwc_otg_hc_cleanup(hcd->core_if, channel); ++ } ++ ++ /* Initialize the DWC core for host mode operation. */ ++ dwc_otg_core_host_init(hcd->core_if); ++ ++ /* Set core_if's lock pointer to the hcd->lock */ ++ hcd->core_if->lock = hcd->lock; ++} ++ ++/** ++ * Assigns transactions from a QTD to a free host channel and initializes the ++ * host channel to perform the transactions. The host channel is removed from ++ * the free list. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh Transactions from the first QTD for this QH are selected and ++ * assigned to a free host channel. ++ */ ++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_hc_t *hc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ void* ptr = NULL; ++ uint32_t intr_enable; ++ unsigned long flags; ++ gintmsk_data_t gintmsk = { .d32 = 0, }; ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); ++ ++ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) ++ urb->actual_length = urb->length; ++ ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ qh->channel = hc; ++ ++ qtd->in_process = 1; ++ ++ /* ++ * Use usb_pipedevice to determine device address. This address is ++ * 0 before the SET_ADDRESS command and the correct address afterward. ++ */ ++ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); ++ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); ++ hc->speed = qh->dev_speed; ++ hc->max_packet = dwc_max_packet(qh->maxp); ++ ++ hc->xfer_started = 0; ++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; ++ hc->error_state = (qtd->error_count > 0); ++ hc->halt_on_queue = 0; ++ hc->halt_pending = 0; ++ hc->requests = 0; ++ ++ /* ++ * The following values may be modified in the transfer type section ++ * below. The xfer_len value may be reduced when the transfer is ++ * started to accommodate the max widths of the XferSize and PktCnt ++ * fields in the HCTSIZn register. ++ */ ++ ++ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } else { ++ hc->do_ping = qh->ping_state; ++ } ++ ++ hc->data_pid_start = qh->data_toggle; ++ hc->multi_count = 1; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; ++ ++ /* For non-dword aligned case */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && !hcd->core_if->dma_desc_enable) { ++ ptr = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ hc->xfer_len = urb->length - urb->actual_length; ++ hc->xfer_count = 0; ++ ++ /* ++ * Set the split attributes ++ */ ++ hc->do_split = 0; ++ if (qh->do_split) { ++ uint32_t hub_addr, port_addr; ++ hc->do_split = 1; ++ hc->xact_pos = qtd->isoc_split_pos; ++ /* We don't need to do complete splits anymore */ ++// if(fiq_fsm_enable) ++ if (0) ++ hc->complete_split = qtd->complete_split = 0; ++ else ++ hc->complete_split = qtd->complete_split; ++ ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); ++ hc->hub_addr = (uint8_t) hub_addr; ++ hc->port_addr = (uint8_t) port_addr; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); ++ hc->do_ping = 0; ++ hc->ep_is_in = 0; ++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->setup_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->setup_packet; ++ } ++ hc->xfer_len = 8; ++ ptr = NULL; ++ break; ++ case DWC_OTG_CONTROL_DATA: ++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ hc->data_pid_start = qtd->data_toggle; ++ break; ++ case DWC_OTG_CONTROL_STATUS: ++ /* ++ * Direction is opposite of data direction or IN if no ++ * data. ++ */ ++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); ++ if (urb->length == 0) { ++ hc->ep_is_in = 1; ++ } else { ++ hc->ep_is_in = ++ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); ++ } ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } ++ ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ ++ hc->xfer_len = 0; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf; ++ } ++ ptr = NULL; ++ break; ++ } ++ break; ++ case UE_BULK: ++ hc->ep_type = DWC_OTG_EP_TYPE_BULK; ++ break; ++ case UE_INTERRUPT: ++ hc->ep_type = DWC_OTG_EP_TYPE_INTR; ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; ++ ++ if (hcd->core_if->dma_desc_enable) ++ break; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ ++ frame_desc->status = 0; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf; ++ } ++ hc->xfer_buff += ++ frame_desc->offset + qtd->isoc_split_offset; ++ hc->xfer_len = ++ frame_desc->length - qtd->isoc_split_offset; ++ ++ /* For non-dword aligned buffers */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && hcd->core_if->dma_enable) { ++ ptr = ++ (uint8_t *) urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset; ++ } else ++ ptr = NULL; ++ ++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ if (hc->xfer_len <= 188) { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ } else { ++ hc->xact_pos = ++ DWC_HCSPLIT_XACTPOS_BEGIN; ++ } ++ } ++ } ++ break; ++ } ++ /* non DWORD-aligned buffer case */ ++ if (ptr) { ++ uint32_t buf_size; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } else { ++ buf_size = 4096; ++ } ++ if (!qh->dw_align_buf) { ++ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(dev, buf_size, ++ &qh->dw_align_buf_dma); ++ if (!qh->dw_align_buf) { ++ DWC_ERROR ++ ("%s: Failed to allocate memory to handle " ++ "non-dword aligned buffer case\n", ++ __func__); ++ return; ++ } ++ } ++ if (!hc->ep_is_in) { ++ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); ++ } ++ hc->align_buff = qh->dw_align_buf_dma; ++ } else { ++ hc->align_buff = 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This value may be modified when the transfer is started to ++ * reflect the actual transfer length. ++ */ ++ hc->multi_count = dwc_hb_mult(qh->maxp); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) ++ hc->desc_list_addr = qh->desc_list_dma; ++ ++ dwc_otg_hc_init(hcd->core_if, hc); ++ ++ local_irq_save(flags); ++ ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ } ++ ++ /* Enable the top level host channel interrupt. */ ++ intr_enable = (1 << hc->hc_num); ++ DWC_MODIFY_REG32(&hcd->core_if->host_if->host_global_regs->haintmsk, 0, intr_enable); ++ ++ /* Make sure host channel interrupts are enabled. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ ++ if (fiq_enable) { ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ local_irq_restore(flags); ++ hc->qh = qh; ++} ++ ++ ++/** ++ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ ++ * @qh: pointer to the endpoint's queue head ++ * ++ * Transaction start/end control flow is grafted onto the existing dwc_otg ++ * mechanisms, to avoid spaghettifying the functions more than they already are. ++ * This function's eligibility check is altered by debug parameter. ++ * ++ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction. ++ */ ++ ++int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh) ++{ ++ if (qh->do_split) { ++ switch (qh->ep_type) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (fiq_fsm_mask & (1 << 0)) ++ return 1; ++ break; ++ case UE_INTERRUPT: ++ case UE_ISOCHRONOUS: ++ if (fiq_fsm_mask & (1 << 1)) ++ return 1; ++ break; ++ default: ++ break; ++ } ++ } else if (qh->ep_type == UE_ISOCHRONOUS) { ++ if (fiq_fsm_mask & (1 << 2)) { ++ /* HS ISOCH support. We test for compatibility: ++ * - DWORD aligned buffers ++ * - Must be at least 2 transfers (otherwise pointless to use the FIQ) ++ * If yes, then the fsm enqueue function will handle the state machine setup. ++ */ ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs; ++ int nr_iso_frames = urb->packet_count; ++ int i; ++ uint32_t ptr; ++ ++ if (nr_iso_frames < 2) ++ return 0; ++ for (i = 0; i < nr_iso_frames; i++) { ++ ptr = urb->dma + iso_descs[i]->offset; ++ if (ptr & 0x3) { ++ printk_ratelimited("%s: Non-Dword aligned isochronous frame offset." ++ " Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n", ++ __FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num); ++ return 0; ++ } ++ } ++ return 1; ++ } ++ } ++ return 0; ++} ++ ++/** ++ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers ++ * @hcd: Pointer to the dwc_otg_hcd struct ++ * @qh: Pointer to the endpoint's queue head ++ * ++ * Periodic split transactions are transmitted modulo 188 bytes. ++ * This necessitates slicing data up into buckets for isochronous out ++ * and fixing up the DMA address for all IN transfers. ++ * ++ * Returns 1 if the DMA bounce buffers have been used, 0 if the default ++ * HC buffer has been used. ++ */ ++int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh) ++ { ++ int frame_length, i = 0; ++ uint8_t *ptr = NULL; ++ dwc_hc_t *hc = qh->channel; ++ struct fiq_dma_blob *blob; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ for (i = 0; i < 6; i++) { ++ st->dma_info.slot_len[i] = 255; ++ } ++ st->dma_info.index = 0; ++ i = 0; ++ if (hc->ep_is_in) { ++ /* ++ * Set dma_regs to bounce buffer. FIQ will update the ++ * state depending on transaction progress. ++ */ ++ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; ++ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ /* Calculate the max number of CSPLITS such that the FIQ can time out ++ * a transaction if it fails. ++ */ ++ frame_length = st->hcchar_copy.b.mps; ++ do { ++ i++; ++ frame_length -= 188; ++ } while (frame_length >= 0); ++ st->nrpackets = i; ++ return 1; ++ } else { ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ frame_length = frame_desc->length; ++ ++ /* Virtual address for bounce buffers */ ++ blob = hcd->fiq_dmab; ++ ++ ptr = qtd->urb->buf + frame_desc->offset; ++ if (frame_length == 0) { ++ /* ++ * for isochronous transactions, we must still transmit a packet ++ * even if the length is zero. ++ */ ++ st->dma_info.slot_len[0] = 0; ++ st->nrpackets = 1; ++ } else { ++ do { ++ if (frame_length <= 188) { ++ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length); ++ st->dma_info.slot_len[i] = frame_length; ++ ptr += frame_length; ++ } else { ++ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188); ++ st->dma_info.slot_len[i] = 188; ++ ptr += 188; ++ } ++ i++; ++ frame_length -= 188; ++ } while (frame_length > 0); ++ st->nrpackets = i; ++ } ++ ptr = qtd->urb->buf + frame_desc->offset; ++ /* Point the HC at the DMA address of the bounce buffers */ ++ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; ++ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ ++ /* fixup xfersize to the actual packet size */ ++ st->hctsiz_copy.b.pid = 0; ++ st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0]; ++ return 1; ++ } else { ++ /* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */ ++ return 0; ++ } ++ } ++} ++ ++/* ++ * Pushing a periodic request into the queue near the EOF1 point ++ * in a microframe causes erroneous behaviour (frmovrun) interrupt. ++ * Usually, the request goes out on the bus causing a transfer but ++ * the core does not transfer the data to memory. ++ * This guard interval (in number of 60MHz clocks) is required which ++ * must cater for CPU latency between reading the value and enabling ++ * the channel. ++ */ ++#define PERIODIC_FRREM_BACKOFF 1000 ++ ++int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ dwc_hc_t *hc = qh->channel; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ int frame; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; ++ int xfer_len, nrpackets; ++ hcdma_data_t hcdma; ++ hfnum_data_t hfnum; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) ++ return 0; ++ ++ st->nr_errors = 0; ++ ++ st->hcchar_copy.d32 = 0; ++ st->hcchar_copy.b.mps = hc->max_packet; ++ st->hcchar_copy.b.epdir = hc->ep_is_in; ++ st->hcchar_copy.b.devaddr = hc->dev_addr; ++ st->hcchar_copy.b.epnum = hc->ep_num; ++ st->hcchar_copy.b.eptype = hc->ep_type; ++ ++ st->hcintmsk_copy.b.chhltd = 1; ++ ++ frame = dwc_otg_hcd_get_frame_number(hcd); ++ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; ++ ++ st->hcchar_copy.b.lspddev = 0; ++ /* Enable the channel later as a final register write. */ ++ ++ st->hcsplt_copy.d32 = 0; ++ ++ st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs; ++ st->hs_isoc_info.nrframes = qtd->urb->packet_count; ++ /* grab the next DMA address offset from the array */ ++ st->hcdma_copy.d32 = qtd->urb->dma; ++ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset; ++ ++ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as ++ * the core needs to be told to send the correct number. Caution: for IN transfers, ++ * this is always set to the maximum size of the endpoint. */ ++ xfer_len = st->hs_isoc_info.iso_desc[0].length; ++ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; ++ if (nrpackets == 0) ++ nrpackets = 1; ++ st->hcchar_copy.b.multicnt = nrpackets; ++ st->hctsiz_copy.b.pktcnt = nrpackets; ++ ++ /* Initial PID also needs to be set */ ++ if (st->hcchar_copy.b.epdir == 0) { ++ st->hctsiz_copy.b.xfersize = xfer_len; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_MDATA; ++ break; ++ } ++ ++ } else { ++ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA1; ++ break; ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA2; ++ break; ++ } ++ } ++ ++ st->hs_isoc_info.stride = qh->interval; ++ st->uframe_sleeps = 0; ++ ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d ", hc->hc_num); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); ++ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); ++ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { ++ /* Prevent queueing near EOF1. Bad things happen if a periodic ++ * split transaction is queued very close to EOF. SOF interrupt handler ++ * will wake this channel at the next interrupt. ++ */ ++ st->fsm = FIQ_HS_ISOC_SLEEPING; ++ st->uframe_sleeps = 1; ++ } else { ++ st->fsm = FIQ_HS_ISOC_TURBO; ++ st->hcchar_copy.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ } ++ mb(); ++ st->hcchar_copy.b.chen = 0; ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ return 0; ++} ++ ++ ++/** ++ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state ++ * @hcd: Pointer to the dwc_otg_hcd struct ++ * @qh: Pointer to the endpoint's queue head ++ * ++ * This overrides the dwc_otg driver's normal method of queueing a transaction. ++ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup ++ * for the nominated host channel. ++ * ++ * For periodic transfers, it also peeks at the FIQ state to see if an immediate ++ * start is possible. If not, then the FIQ is left to start the transfer. ++ */ ++int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int start_immediate = 1, i; ++ hfnum_data_t hfnum; ++ dwc_hc_t *hc = qh->channel; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ /* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */ ++ int hub_addr, port_addr, frame, uframe; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) ++ return 0; ++ st->nr_errors = 0; ++ ++ st->hcchar_copy.d32 = 0; ++ st->hcchar_copy.b.mps = hc->max_packet; ++ st->hcchar_copy.b.epdir = hc->ep_is_in; ++ st->hcchar_copy.b.devaddr = hc->dev_addr; ++ st->hcchar_copy.b.epnum = hc->ep_num; ++ st->hcchar_copy.b.eptype = hc->ep_type; ++ if (hc->ep_type & 0x1) { ++ if (hc->ep_is_in) ++ st->hcchar_copy.b.multicnt = 3; ++ else ++ /* Docs say set this to 1, but driver sets to 0! */ ++ st->hcchar_copy.b.multicnt = 0; ++ } else { ++ st->hcchar_copy.b.multicnt = 1; ++ st->hcchar_copy.b.oddfrm = 0; ++ } ++ st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0; ++ /* Enable the channel later as a final register write. */ ++ ++ st->hcsplt_copy.d32 = 0; ++ if(qh->do_split) { ++ hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr); ++ st->hcsplt_copy.b.compsplt = 0; ++ st->hcsplt_copy.b.spltena = 1; ++ // XACTPOS is for isoc-out only but needs initialising anyway. ++ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL; ++ if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) { ++ /* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL. ++ * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ ++ * will update as necessary. ++ */ ++ if (hc->xfer_len > 188) { ++ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN; ++ } ++ } ++ st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr; ++ st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr; ++ st->hub_addr = hub_addr; ++ st->port_addr = port_addr; ++ } ++ ++ st->hctsiz_copy.d32 = 0; ++ st->hctsiz_copy.b.dopng = 0; ++ st->hctsiz_copy.b.pid = hc->data_pid_start; ++ ++ if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ st->hctsiz_copy.b.xfersize = hc->xfer_len; ++ ++ st->hctsiz_copy.b.pktcnt = 1; ++ ++ if (hc->ep_type & 0x1) { ++ /* ++ * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers, ++ * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array. ++ * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt ++ * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set ++ * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ ++ * must not touch internal driver state. ++ */ ++ if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) { ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ } else { ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ /* The FIQ depends upon no other interrupts being enabled except channel halt. ++ * Fixup channel interrupt mask. */ ++ st->hcintmsk_copy.d32 = 0; ++ st->hcintmsk_copy.b.chhltd = 1; ++ st->hcintmsk_copy.b.ahberr = 1; ++ ++ /* Hack courtesy of FreeBSD: apparently forcing Interrupt Split transactions ++ * as Control puts the transfer into the non-periodic request queue and the ++ * non-periodic handler in the hub. Makes things lots easier. ++ */ ++ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) { ++ st->hcchar_copy.b.multicnt = 0; ++ st->hcchar_copy.b.oddfrm = 0; ++ st->hcchar_copy.b.eptype = UE_CONTROL; ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); ++ ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ ++ if (hc->ep_type & 0x1) { ++ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ frame = (hfnum.b.frnum & ~0x7) >> 3; ++ uframe = hfnum.b.frnum & 0x7; ++ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { ++ /* Prevent queueing near EOF1. Bad things happen if a periodic ++ * split transaction is queued very close to EOF. ++ */ ++ start_immediate = 0; ++ } else if (uframe == 5) { ++ start_immediate = 0; ++ } else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) { ++ start_immediate = 0; ++ } else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) { ++ start_immediate = 0; ++ } else { ++ /* Search through all host channels to determine if a transaction ++ * is currently in progress */ ++ for (i = 0; i < hcd->core_if->core_params->host_channels; i++) { ++ if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ switch (hcd->fiq_state->channel[i].fsm) { ++ /* TT is reserved for channels that are in the middle of a periodic ++ * split transaction. ++ */ ++ case FIQ_PER_SSPLIT_STARTED: ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ case FIQ_PER_ISO_OUT_LAST: ++ if (hcd->fiq_state->channel[i].hub_addr == hub_addr && ++ hcd->fiq_state->channel[i].port_addr == port_addr) { ++ start_immediate = 0; ++ } ++ break; ++ default: ++ break; ++ } ++ if (!start_immediate) ++ break; ++ } ++ } ++ } ++ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) ++ start_immediate = 1; ++ ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); ++ switch (hc->ep_type) { ++ case UE_CONTROL: ++ case UE_BULK: ++ st->fsm = FIQ_NP_SSPLIT_STARTED; ++ break; ++ case UE_ISOCHRONOUS: ++ if (hc->ep_is_in) { ++ if (start_immediate) { ++ st->fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ st->fsm = FIQ_PER_SSPLIT_QUEUED; ++ } ++ } else { ++ if (start_immediate) { ++ /* Single-isoc OUT packets don't require FIQ involvement */ ++ if (st->nrpackets == 1) { ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_PENDING; ++ } ++ } ++ break; ++ case UE_INTERRUPT: ++ if (fiq_fsm_mask & 0x8) { ++ st->fsm = FIQ_NP_SSPLIT_STARTED; ++ } else if (start_immediate) { ++ st->fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ st->fsm = FIQ_PER_SSPLIT_QUEUED; ++ } ++ default: ++ break; ++ } ++ if (start_immediate) { ++ /* Set the oddfrm bit as close as possible to actual queueing */ ++ frame = dwc_otg_hcd_get_frame_number(hcd); ++ st->expected_uframe = (frame + 1) & 0x3FFF; ++ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; ++ st->hcchar_copy.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ } ++ mb(); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ return 0; ++} ++ ++ ++/** ++ * This function selects transactions from the HCD transfer schedule and ++ * assigns them to available host channels. It is called from HCD interrupt ++ * handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * ++ * @return The types of new transactions that were assigned to host channels. ++ */ ++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) ++{ ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int num_channels; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled = 0; ++ last_sel_trans_num_nonper_scheduled = 0; ++ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ /* Process entries in the periodic ready list. */ ++ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); ++ ++ while (qh_ptr != &hcd->periodic_sched_ready && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ if (microframe_schedule) { ++ // Make sure we leave one channel for non periodic transactions. ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels <= 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the periodic ready schedule to the ++ * periodic assigned schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } ++ ++ /* ++ * Process entries in the inactive portion of the non-periodic ++ * schedule. Some free host channels may not be used if they are ++ * reserved for periodic transfers. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ num_channels = hcd->core_if->core_params->host_channels; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive && ++ (microframe_schedule || hcd->non_periodic_channels < ++ num_channels - hcd->periodic_channels) && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ /* ++ * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission ++ * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed ++ * cheeky devices that just hold off using NAKs ++ */ ++ if (fiq_enable && nak_holdoff && qh->do_split) { ++ if (qh->nak_frame != 0xffff) { ++ uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8); ++ uint16_t frame = dwc_otg_hcd_get_frame_number(hcd); ++ if (dwc_frame_num_le(frame, next_frame)) { ++ if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) { ++ hcd->fiq_state->next_sched_frame = next_frame; ++ } ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ continue; ++ } else { ++ qh->nak_frame = 0xFFFF; ++ } ++ } ++ } ++ ++ if (microframe_schedule) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels < 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_nonper_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the non-periodic inactive schedule to the ++ * non-periodic active schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ ++ ++ if (!microframe_schedule) ++ hcd->non_periodic_channels++; ++ } ++ /* we moved a non-periodic QH to the active schedule. If the inactive queue is empty, ++ * stop the FIQ from kicking us. We could potentially still have elements here if we ++ * ran out of host channels. ++ */ ++ if (fiq_enable) { ++ if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) { ++ hcd->fiq_state->kick_np_queues = 0; ++ } else { ++ /* For each entry remaining in the NP inactive queue, ++ * if this a NAK'd retransmit then don't set the kick flag. ++ */ ++ if(nak_holdoff) { ++ DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ if (qh->nak_frame == 0xFFFF) { ++ hcd->fiq_state->kick_np_queues = 1; ++ } ++ } ++ } ++ } ++ } ++ if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) ++ ret_val |= DWC_OTG_TRANSACTION_PERIODIC; ++ ++ if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) ++ ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC; ++ ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ return ret_val; ++} ++ ++/** ++ * Attempts to queue a single transaction request for a host channel ++ * associated with either a periodic or non-periodic transfer. This function ++ * assumes that there is space available in the appropriate request queue. For ++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space ++ * is available in the appropriate Tx FIFO. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc Host channel descriptor associated with either a periodic or ++ * non-periodic transfer. ++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx ++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic ++ * transfers. ++ * ++ * @return 1 if a request is queued and more requests may be needed to ++ * complete the transfer, 0 if no more requests are required for this ++ * transfer, -1 if there is insufficient space in the Tx FIFO. ++ */ ++static int queue_transaction(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, uint16_t fifo_dwords_avail) ++{ ++ int retval; ++ ++ if (hcd->core_if->dma_enable) { ++ if (hcd->core_if->dma_desc_enable) { ++ if (!hc->xfer_started ++ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { ++ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); ++ hc->qh->ping_state = 0; ++ } ++ } else if (!hc->xfer_started) { ++ if (fiq_fsm_enable && hc->error_state) { ++ hcd->fiq_state->channel[hc->hc_num].nr_errors = ++ DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count; ++ hcd->fiq_state->channel[hc->hc_num].fsm = ++ FIQ_PASSTHROUGH_ERRORSTATE; ++ } ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ hc->qh->ping_state = 0; ++ } ++ retval = 0; ++ } else if (hc->halt_pending) { ++ /* Don't queue a request if the channel has been halted. */ ++ retval = 0; ++ } else if (hc->halt_on_queue) { ++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); ++ retval = 0; ++ } else if (hc->do_ping) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ } ++ retval = 0; ++ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ if ((fifo_dwords_avail * 4) >= hc->max_packet) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = ++ dwc_otg_hc_continue_transfer(hcd->core_if, ++ hc); ++ } ++ } else { ++ retval = -1; ++ } ++ } else { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Processes periodic channels for the next frame and queues transactions for ++ * these channels to the DWC_otg controller. After queueing transactions, the ++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions ++ * to queue as Periodic Tx FIFO or request queue space becomes available. ++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. ++ */ ++static void process_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ hptxsts_data_t tx_status; ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status = 0; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ ++ dwc_otg_host_global_regs_t *host_regs; ++ host_regs = hcd->core_if->host_if->host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ ++ qh_ptr = hcd->periodic_sched_assigned.next; ++ while (qh_ptr != &hcd->periodic_sched_assigned) { ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ if (tx_status.b.ptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ // Do not send a split start transaction any later than frame .6 ++ // Note, we have to schedule a periodic in .5 to make it go in .6 ++ if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6) ++ { ++ qh_ptr = qh_ptr->next; ++ hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7; ++ continue; ++ } ++ ++ if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { ++ if (qh->do_split) ++ fiq_fsm_queue_split_transaction(hcd, qh); ++ else ++ fiq_fsm_queue_isoc_transaction(hcd, qh); ++ } else { ++ ++ /* ++ * Set a flag if we're queueing high-bandwidth in slave mode. ++ * The flag prevents any halts to get into the request queue in ++ * the middle of multiple high-bandwidth packets getting queued. ++ */ ++ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { ++ hcd->core_if->queuing_high_bandwidth = 1; ++ } ++ status = queue_transaction(hcd, qh->channel, ++ tx_status.b.ptxfspcavail); ++ if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ } ++ ++ /* ++ * In Slave mode, stay on the current transfer until there is ++ * nothing more to do or the high-bandwidth request count is ++ * reached. In DMA mode, only need to queue one request. The ++ * controller automatically handles multiple packets for ++ * high-bandwidth transfers. ++ */ ++ if (hcd->core_if->dma_enable || status == 0 || ++ qh->channel->requests == qh->channel->multi_count) { ++ qh_ptr = qh_ptr->next; ++ /* ++ * Move the QH from the periodic assigned schedule to ++ * the periodic queued schedule. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, ++ &qh->qh_list_entry); ++ ++ /* done queuing high bandwidth */ ++ hcd->core_if->queuing_high_bandwidth = 0; ++ } ++ } ++ ++ if (!hcd->core_if->dma_enable) { ++ dwc_otg_core_global_regs_t *global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ global_regs = hcd->core_if->core_global_regs; ++ intr_mask.b.ptxfempty = 1; ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || ++ no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the periodic Tx ++ * FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * Processes active non-periodic channels and queues transactions for these ++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx ++ * FIFO Empty interrupt is enabled if there are more transactions to queue as ++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx ++ * FIFO Empty interrupt is disabled. ++ */ ++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ gnptxsts_data_t tx_status; ++ dwc_list_link_t *orig_qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ int more_to_do = 0; ++ ++ dwc_otg_core_global_regs_t *global_regs = ++ hcd->core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ /* ++ * Keep track of the starting point. Skip over the start-of-list ++ * entry. ++ */ ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ orig_qh_ptr = hcd->non_periodic_qh_ptr; ++ ++ /* ++ * Process once through the active list or until no more space is ++ * available in the request queue or the Tx FIFO. ++ */ ++ do { ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, ++ qh_list_entry); ++ ++ if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { ++ fiq_fsm_queue_split_transaction(hcd, qh); ++ } else { ++ status = queue_transaction(hcd, qh->channel, ++ tx_status.b.nptxfspcavail); ++ ++ if (status > 0) { ++ more_to_do = 1; ++ } else if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ } ++ /* Advance to next QH, skipping start-of-list entry. */ ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ ++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); ++ ++ if (!hcd->core_if->dma_enable) { ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ intr_mask.b.nptxfempty = 1; ++ ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ if (more_to_do || no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the non-periodic ++ * Tx FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * This function processes the currently active host channels and queues ++ * transactions for these channels to the DWC_otg controller. It is called ++ * from HCD interrupt handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * @param tr_type The type(s) of transactions to queue (non-periodic, ++ * periodic, or both). ++ */ ++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type) ++{ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); ++#endif ++ /* Process host channels associated with periodic transfers. */ ++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) && ++ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { ++ ++ process_periodic_channels(hcd); ++ } ++ ++ /* Process host channels associated with non-periodic transfers. */ ++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) { ++ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { ++ process_non_periodic_channels(hcd); ++ } else { ++ /* ++ * Ensure NP Tx FIFO empty interrupt is disabled when ++ * there are no non-periodic transfers to process. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintmsk.b.nptxfempty = 1; ++ ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ } ++ } ++ } ++} ++ ++#ifdef DWC_HS_ELECT_TST ++/* ++ * Quick and dirty hack to implement the HS Electrical Test ++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. ++ * ++ * This code was copied from our userspace app "hset". It sends a ++ * Get Device Descriptor control sequence in two parts, first the ++ * Setup packet by itself, followed some time later by the In and ++ * Ack packets. Rather than trying to figure out how to add this ++ * functionality to the normal driver code, we just hijack the ++ * hardware, using these two function to drive the hardware ++ * directly. ++ */ ++ ++static dwc_otg_core_global_regs_t *global_regs; ++static dwc_otg_host_global_regs_t *hc_global_regs; ++static dwc_otg_hc_regs_t *hc_regs; ++static uint32_t *data_fifo; ++ ++static void do_setup(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Send Setup packet (Get Device Descriptor) ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++// hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ /* Fill FIFO with Setup data for Get Device Descriptor */ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ DWC_WRITE_REG32(data_fifo++, 0x01000680); ++ DWC_WRITE_REG32(data_fifo++, 0x00080000); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++ ++static void do_in_ack(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ host_grxsts_data_t grxsts; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Receive Control In packet ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 1; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer */ ++ if (grxsts.b.bcnt > 0) { ++ int i; ++ int word_count = (grxsts.b.bcnt + 3) / 4; ++ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ ++ for (i = 0; i < word_count; i++) { ++ (void)DWC_READ_REG32(data_fifo++); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++// usleep(100000); ++// mdelay(100); ++ dwc_mdelay(1); ++ ++ /* ++ * Send handshake packet ++ */ ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 0; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++#endif ++ ++/** Handles hub class-specific requests. */ ++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, ++ uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, uint16_t wLength) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ usb_hub_descriptor_t *hub_desc; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ uint32_t port_status; ++ ++ switch (typeReq) { ++ case UCR_CLEAR_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearHubFeature 0x%x\n", wValue); ++ switch (wValue) { ++ case UHF_C_HUB_LOCAL_POWER: ++ case UHF_C_HUB_OVER_CURRENT: ++ /* Nothing required here */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearHubFeature request %xh unknown\n", ++ wValue); ++ } ++ break; ++ case UCR_CLEAR_PORT_FEATURE: ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (wValue != UHF_PORT_L1) ++#endif ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ switch (wValue) { ++ case UHF_PORT_ENABLE: ++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtena = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); ++ ++ if (core_if->power_down == 2) { ++ dwc_otg_host_hibernation_restore(core_if, 0, 0); ++ } else { ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ hprt0.b.prtsusp = 0; ++ /* Clear Resume bit */ ++ dwc_mdelay(100); ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_PORT_L1: ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ lpmcfg.b.prt_sleep_sts = 1; ++ DWC_WRITE_REG32(&core_if-> ++ core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ ++ /* Clear Enbl_L1Gating bit. */ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, ++ 0); ++ ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ /* This bit will be cleared in wakeup interrupt handle */ ++ break; ++ } ++#endif ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); ++ /* Port inidicator not supported */ ++ break; ++ case UHF_C_PORT_CONNECTION: ++ /* Clears drivers internal connect status change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 0; ++ break; ++ case UHF_C_PORT_RESET: ++ /* Clears the driver's internal Port Reset Change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); ++ dwc_otg_hcd->flags.b.port_reset_change = 0; ++ break; ++ case UHF_C_PORT_ENABLE: ++ /* Clears the driver's internal Port ++ * Enable/Disable Change flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); ++ dwc_otg_hcd->flags.b.port_enable_change = 0; ++ break; ++ case UHF_C_PORT_SUSPEND: ++ /* Clears the driver's internal Port Suspend ++ * Change flag, which is set when resume signaling on ++ * the host port is complete */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); ++ dwc_otg_hcd->flags.b.port_suspend_change = 0; ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_C_PORT_L1: ++ dwc_otg_hcd->flags.b.port_l1_change = 0; ++ break; ++#endif ++ case UHF_C_PORT_OVER_CURRENT: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); ++ dwc_otg_hcd->flags.b.port_over_current_change = 0; ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ } ++ break; ++ case UCR_GET_HUB_DESCRIPTOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubDescriptor\n"); ++ hub_desc = (usb_hub_descriptor_t *) buf; ++ hub_desc->bDescLength = 9; ++ hub_desc->bDescriptorType = 0x29; ++ hub_desc->bNbrPorts = 1; ++ USETW(hub_desc->wHubCharacteristics, 0x08); ++ hub_desc->bPwrOn2PwrGood = 1; ++ hub_desc->bHubContrCurrent = 0; ++ hub_desc->DeviceRemovable[0] = 0; ++ hub_desc->DeviceRemovable[1] = 0xff; ++ break; ++ case UCR_GET_HUB_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubStatus\n"); ++ DWC_MEMSET(buf, 0, 4); ++ break; ++ case UCR_GET_PORT_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n", ++ wIndex, dwc_otg_hcd->flags.d32); ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ port_status = 0; ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status_change) ++ port_status |= (1 << UHF_C_PORT_CONNECTION); ++ ++ if (dwc_otg_hcd->flags.b.port_enable_change) ++ port_status |= (1 << UHF_C_PORT_ENABLE); ++ ++ if (dwc_otg_hcd->flags.b.port_suspend_change) ++ port_status |= (1 << UHF_C_PORT_SUSPEND); ++ ++ if (dwc_otg_hcd->flags.b.port_l1_change) ++ port_status |= (1 << UHF_C_PORT_L1); ++ ++ if (dwc_otg_hcd->flags.b.port_reset_change) { ++ port_status |= (1 << UHF_C_PORT_RESET); ++ } ++ ++ if (dwc_otg_hcd->flags.b.port_over_current_change) { ++ DWC_WARN("Overcurrent change detected\n"); ++ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); ++ } ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return 0's for the remainder of the port status ++ * since the port register can't be read if the core ++ * is in device mode. ++ */ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ break; ++ } ++ ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); ++ ++ if (hprt0.b.prtconnsts) ++ port_status |= (1 << UHF_PORT_CONNECTION); ++ ++ if (hprt0.b.prtena) ++ port_status |= (1 << UHF_PORT_ENABLE); ++ ++ if (hprt0.b.prtsusp) ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ ++ if (hprt0.b.prtovrcurract) ++ port_status |= (1 << UHF_PORT_OVER_CURRENT); ++ ++ if (hprt0.b.prtrst) ++ port_status |= (1 << UHF_PORT_RESET); ++ ++ if (hprt0.b.prtpwr) ++ port_status |= (1 << UHF_PORT_POWER); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ port_status |= (1 << UHF_PORT_HIGH_SPEED); ++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ++ port_status |= (1 << UHF_PORT_LOW_SPEED); ++ ++ if (hprt0.b.prttstctl) ++ port_status |= (1 << UHF_PORT_TEST); ++ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { ++ port_status |= (1 << UHF_PORT_L1); ++ } ++ /* ++ For Synopsys HW emulation of Power down wkup_control asserts the ++ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. ++ We intentionally tell the software that port is in L2Suspend state. ++ Only for STE. ++ */ ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ } ++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ ++ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ ++ break; ++ case UCR_SET_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetHubFeature\n"); ++ /* No HUB features supported */ ++ break; ++ case UCR_SET_PORT_FEATURE: ++ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) ++ goto error; ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return without doing anything since the port ++ * register can't be written if the core is in device ++ * mode. ++ */ ++ break; ++ } ++ ++ switch (wValue) { ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) { ++ goto error; ++ } ++ if (core_if->power_down == 2) { ++ int timeout = 300; ++ dwc_irqflags_t flags; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++#ifdef DWC_DEV_SRPCAP ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++#endif ++ DWC_PRINTF("Preparing for complete power-off\n"); ++ ++ /* Save registers before hibernation */ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_host_regs(core_if); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Spin hprt0.b.prtsusp to became 1 */ ++ do { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ if (hprt0.b.prtsusp) { ++ break; ++ } ++ dwc_mdelay(1); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Suspend wasn't genereted\n"); ++ } ++ dwc_udelay(10); ++ ++ /* ++ * We need to disable interrupts to prevent servicing of any IRQ ++ * during going to hibernation ++ */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++#ifdef DWC_DEV_SRPCAP ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++#endif ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ dwc_udelay(10); ++ } ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++#endif ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = 0; ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.b.srp_det_msk = 1; ++#endif ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp and all interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) ++ { ++ core_if->pwron_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ ); ++ } ++#endif ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags); ++ ++ DWC_PRINTF("Host hibernation completed\n"); ++ // Exit from case statement ++ break; ++ ++ } ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && ++ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gotgctl, 0, gotgctl.d32); ++ core_if->op_state = A_SUSPEND; ++ } ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ { ++ dwc_irqflags_t flags; ++ /* Update lx_state */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ } ++ /* Suspend the Phy Clock */ ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* For HNP the bus must be suspended for at least 200ms. */ ++ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_mdelay(200); ++ } ++ ++ /** @todo - check how sw can wait for 1 sec to check asesvld??? */ ++#if 0 //vahrama !!!!!!!!!!!!!!!!!! ++ if (core_if->adp_enable) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn; ++ ++ while (gotgctl.b.asesvld == 1) { ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs-> ++ gotgctl); ++ dwc_mdelay(100); ++ } ++ ++ /* Enable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ } ++#endif ++ break; ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_RESET: ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ /* If we are going to exit from Hibernated ++ * state via USB RESET. ++ */ ++ dwc_otg_host_hibernation_restore(core_if, 0, 1); ++ } else { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_RESET\n"); ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.enbl_sleep_gating = 1; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32 ++ (&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ dwc_mdelay(1); ++ } ++ } ++#endif ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ /* Clear suspend bit if resetting from suspended state. */ ++ hprt0.b.prtsusp = 0; ++ /* When B-Host the Port reset bit is set in ++ * the Start HCD Callback function, so that ++ * the reset is started within 1ms of the HNP ++ * success interrupt. */ ++ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtrst = 1; ++ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ ++ } ++ break; ++#ifdef DWC_HS_ELECT_TST ++ case UHF_PORT_TEST: ++ { ++ uint32_t t; ++ gintmsk_data_t gintmsk; ++ ++ t = (wIndex >> 8); /* MSB wIndex USB */ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", ++ t); ++ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); ++ if (t < 6) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prttstctl = t; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } else { ++ /* Setup global vars with reg addresses (quick and ++ * dirty hack, should be cleaned up) ++ */ ++ global_regs = core_if->core_global_regs; ++ hc_global_regs = ++ core_if->host_if->host_global_regs; ++ hc_regs = ++ (dwc_otg_hc_regs_t *) ((char *) ++ global_regs + ++ 0x500); ++ data_fifo = ++ (uint32_t *) ((char *)global_regs + ++ 0x1000); ++ ++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive suspend on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive resume on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 0; ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(100); ++ ++ /* Clear the resume bit */ ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Send the In and Ack packets */ ++ do_in_ack(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } ++ } ++ break; ++ } ++#endif /* DWC_HS_ELECT_TST */ ++ ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); ++ /* Not supported */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "SetPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ break; ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UCR_SET_AND_TEST_PORT_FEATURE: ++ if (wValue != UHF_PORT_L1) { ++ goto error; ++ } ++ { ++ int portnum, hird, devaddr, remwake; ++ glpmcfg_data_t lpmcfg; ++ uint32_t time_usecs; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ ++ if (!dwc_otg_get_param_lpm_enable(core_if)) { ++ goto error; ++ } ++ if (wValue != UHF_PORT_L1 || wLength != 1) { ++ goto error; ++ } ++ /* Check if the port currently is in SLEEP state */ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ DWC_INFO("Port is already in sleep mode\n"); ++ buf[0] = 0; /* Return success */ ++ break; ++ } ++ ++ portnum = wIndex & 0xf; ++ hird = (wIndex >> 4) & 0xf; ++ devaddr = (wIndex >> 8) & 0x7f; ++ remwake = (wIndex >> 15); ++ ++ if (portnum != 1) { ++ retval = -DWC_E_INVALID; ++ DWC_WARN ++ ("Wrong port number(%d) in SetandTestPortFeature request\n", ++ portnum); ++ break; ++ } ++ ++ DWC_PRINTF ++ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", ++ portnum, hird, devaddr, remwake); ++ /* Disable LPM interrupt */ ++ gintmsk.d32 = 0; ++ gintmsk.b.lpmtranrcvd = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ gintmsk.d32, 0); ++ ++ if (dwc_otg_hcd_send_lpm ++ (dwc_otg_hcd, devaddr, hird, remwake)) { ++ retval = -DWC_E_INVALID; ++ break; ++ } ++ ++ time_usecs = 10 * (lpmcfg.b.retry_count + 1); ++ /* We will consider timeout if time_usecs microseconds pass, ++ * and we don't receive LPM transaction status. ++ * After receiving non-error responce(ACK/NYET/STALL) from device, ++ * core will set lpmtranrcvd bit. ++ */ ++ do { ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.lpmtranrcvd) { ++ break; ++ } ++ dwc_udelay(1); ++ } while (--time_usecs); ++ /* lpm_int bit will be cleared in LPM interrupt handler */ ++ ++ /* Now fill status ++ * 0x00 - Success ++ * 0x10 - NYET ++ * 0x11 - Timeout ++ */ ++ if (!gintsts.b.lpmtranrcvd) { ++ buf[0] = 0x3; /* Completion code is Timeout */ ++ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); ++ } else { ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.lpm_resp == 0x3) { ++ /* ACK responce from the device */ ++ buf[0] = 0x00; /* Success */ ++ } else if (lpmcfg.b.lpm_resp == 0x2) { ++ /* NYET responce from the device */ ++ buf[0] = 0x2; ++ } else { ++ /* Otherwise responce with Timeout */ ++ buf[0] = 0x3; ++ } ++ } ++ DWC_PRINTF("Device responce to LPM trans is %x\n", ++ lpmcfg.b.lpm_resp); ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, ++ gintmsk.d32); ++ ++ break; ++ } ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ default: ++error: ++ retval = -DWC_E_INVALID; ++ DWC_WARN("DWC OTG HCD - " ++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", ++ typeReq, wIndex, wValue); ++ break; ++ } ++ ++ return retval; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** Returns index of host channel to perform LPM transaction. */ ++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) ++{ ++ dwc_otg_core_if_t *core_if = hcd->core_if; ++ dwc_hc_t *hc; ++ hcchar_data_t hcchar; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ DWC_PRINTF("No free channel to select for LPM transaction\n"); ++ return -1; ++ } ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Mask host channel interrupts. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ /* Fill fields that core needs for LPM transaction */ ++ hcchar.b.devaddr = devaddr; ++ hcchar.b.epnum = 0; ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.mps = 64; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.epdir = 0; /* OUT */ ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, ++ hcchar.d32); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); ++ ++ return hc->hc_num; ++} ++ ++/** Release hc after performing LPM transaction */ ++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) ++{ ++ dwc_hc_t *hc; ++ glpmcfg_data_t lpmcfg; ++ uint8_t hc_num; ++ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ hc_num = lpmcfg.b.lpm_chan_index; ++ ++ hc = hcd->hc_ptr_array[hc_num]; ++ ++ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); ++ /* Return host channel to free list */ ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++} ++ ++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, ++ uint8_t bRemoteWake) ++{ ++ glpmcfg_data_t lpmcfg; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ int channel; ++ ++ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); ++ if (channel < 0) { ++ return channel; ++ } ++ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Read LPM config register */ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ ++ /* Program LPM transaction fields */ ++ lpmcfg.b.rem_wkup_en = bRemoteWake; ++ lpmcfg.b.hird = hird; ++ lpmcfg.b.hird_thres = 0x1c; ++ lpmcfg.b.lpm_chan_index = channel; ++ lpmcfg.b.en_utmi_sleep = 1; ++ /* Program LPM config register */ ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ /* Send LPM transaction */ ++ lpmcfg.b.send_lpm = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ return 0; ++} ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) ++{ ++ int retval; ++ ++ if (port != 1) { ++ return -DWC_E_INVALID; ++ } ++ ++ retval = (hcd->flags.b.port_connect_status_change || ++ hcd->flags.b.port_reset_change || ++ hcd->flags.b.port_enable_change || ++ hcd->flags.b.port_suspend_change || ++ hcd->flags.b.port_over_current_change); ++#ifdef DEBUG ++ if (retval) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" ++ " Root port status changed\n"); ++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", ++ hcd->flags.b.port_connect_status_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", ++ hcd->flags.b.port_reset_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", ++ hcd->flags.b.port_enable_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", ++ hcd->flags.b.port_suspend_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", ++ hcd->flags.b.port_over_current_change); ++ } ++#endif ++ return retval; ++} ++ ++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs-> ++ hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", ++ hfnum.b.frnum); ++#endif ++ return hfnum.b.frnum; ++} ++ ++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops) ++{ ++ int retval = 0; ++ ++ hcd->fops = fops; ++ if (!dwc_otg_is_device_mode(hcd->core_if) && ++ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) { ++ dwc_otg_hcd_reinit(hcd); ++ } else { ++ retval = -DWC_E_NO_DEVICE; ++ } ++ ++ return retval; ++} ++ ++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->priv; ++} ++ ++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) ++{ ++ hcd->priv = priv_data; ++} ++ ++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->otg_port; ++} ++ ++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) ++{ ++ uint32_t is_b_host; ++ if (hcd->core_if->op_state == B_HOST) { ++ is_b_host = 1; ++ } else { ++ is_b_host = 0; ++ } ++ ++ return is_b_host; ++} ++ ++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, int atomic_alloc) ++{ ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ uint32_t size; ++ ++ size = ++ sizeof(*dwc_otg_urb) + ++ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); ++ if (atomic_alloc) ++ dwc_otg_urb = DWC_ALLOC_ATOMIC(size); ++ else ++ dwc_otg_urb = DWC_ALLOC(size); ++ ++ if (dwc_otg_urb) ++ dwc_otg_urb->packet_count = iso_desc_count; ++ else { ++ DWC_ERROR("**** DWC OTG HCD URB alloc - " ++ "%salloc of %db failed\n", ++ atomic_alloc?"atomic ":"", size); ++ } ++ return dwc_otg_urb; ++} ++ ++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ uint8_t dev_addr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) ++{ ++ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, ++ ep_type, ep_dir, mps); ++#if 0 ++ DWC_PRINTF ++ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", ++ dev_addr, ep_num, ep_dir, ep_type, mps); ++#endif ++} ++ ++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void *urb_handle, void *buf, dwc_dma_t dma, ++ uint32_t buflen, void *setup_packet, ++ dwc_dma_t setup_dma, uint32_t flags, ++ uint16_t interval) ++{ ++ dwc_otg_urb->priv = urb_handle; ++ dwc_otg_urb->buf = buf; ++ dwc_otg_urb->dma = dma; ++ dwc_otg_urb->length = buflen; ++ dwc_otg_urb->setup_packet = setup_packet; ++ dwc_otg_urb->setup_dma = setup_dma; ++ dwc_otg_urb->flags = flags; ++ dwc_otg_urb->interval = interval; ++ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->actual_length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->error_count; ++} ++ ++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length) ++{ ++ dwc_otg_urb->iso_descs[desc_num].offset = offset; ++ dwc_otg_urb->iso_descs[desc_num].length = length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].actual_length; ++} ++ ++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int allocated = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ ++ if (qh) { ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ allocated = 1; ++ } ++ } ++ return allocated; ++} ++ ++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int freed = 0; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ freed = 1; ++ } ++ ++ return freed; ++} ++ ++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ return qh->usecs; ++} ++ ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int num_channels; ++ int i; ++ gnptxsts_data_t np_tx_status; ++ hptxsts_data_t p_tx_status; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_PRINTF("\n"); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("HCD State:\n"); ++ DWC_PRINTF(" Num channels: %d\n", num_channels); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" Channel %d:\n", i); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" speed: %d\n", hc->speed); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); ++ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" do_split: %d\n", hc->do_split); ++ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); ++ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); ++ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); ++ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); ++ DWC_PRINTF(" requests: %d\n", hc->requests); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ if (hc->xfer_started) { ++ hfnum_data_t hfnum; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if-> ++ host_if->host_global_regs->hfnum); ++ hcchar.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcchar); ++ hctsiz.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hctsiz); ++ hcint.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcint); ++ hcintmsk.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcintmsk); ++ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); ++ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); ++ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); ++ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); ++ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); ++ } ++ if (hc->xfer_started && hc->qh) { ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { ++ if (!qtd->in_process) ++ break; ++ ++ urb = qtd->urb; ++ DWC_PRINTF(" URB Info:\n"); ++ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); ++ if (urb) { ++ DWC_PRINTF(" Dev: %d, EP: %d %s\n", ++ dwc_otg_hcd_get_dev_addr(&urb-> ++ pipe_info), ++ dwc_otg_hcd_get_ep_num(&urb-> ++ pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb-> ++ pipe_info) ? ++ "IN" : "OUT"); ++ DWC_PRINTF(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb-> ++ pipe_info)); ++ DWC_PRINTF(" transfer_buffer: %p\n", ++ urb->buf); ++ DWC_PRINTF(" transfer_dma: %p\n", ++ (void *)urb->dma); ++ DWC_PRINTF(" transfer_buffer_length: %d\n", ++ urb->length); ++ DWC_PRINTF(" actual_length: %d\n", ++ urb->actual_length); ++ } ++ } ++ } ++ } ++ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); ++ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); ++ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); ++ np_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts); ++ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", ++ np_tx_status.b.nptxqspcavail); ++ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", ++ np_tx_status.b.nptxfspcavail); ++ p_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts); ++ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", ++ p_tx_status.b.ptxqspcavail); ++ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); ++ dwc_otg_hcd_dump_frrem(hcd); ++ dwc_otg_dump_global_registers(hcd->core_if); ++ dwc_otg_dump_host_registers(hcd->core_if); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("\n"); ++#endif ++} ++ ++#ifdef DEBUG ++void dwc_print_setup_data(uint8_t * setup) ++{ ++ int i; ++ if (CHK_DEBUG_LEVEL(DBG_HCD)) { ++ DWC_PRINTF("Setup Data = MSB "); ++ for (i = 7; i >= 0; i--) ++ DWC_PRINTF("%02x ", setup[i]); ++ DWC_PRINTF("\n"); ++ DWC_PRINTF(" bmRequestType Tranfer = %s\n", ++ (setup[0] & 0x80) ? "Device-to-Host" : ++ "Host-to-Device"); ++ DWC_PRINTF(" bmRequestType Type = "); ++ switch ((setup[0] & 0x60) >> 5) { ++ case 0: ++ DWC_PRINTF("Standard\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Class\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Vendor\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bmRequestType Recipient = "); ++ switch (setup[0] & 0x1f) { ++ case 0: ++ DWC_PRINTF("Device\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Interface\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Endpoint\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Other\n"); ++ break; ++ default: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); ++ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); ++ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); ++ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); ++ } ++} ++#endif ++ ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) ++{ ++#if 0 ++ DWC_PRINTF("Frame remaining at SOF:\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->frrem_samples, hcd->frrem_accum, ++ (hcd->frrem_samples > 0) ? ++ hcd->frrem_accum / hcd->frrem_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_7_samples, ++ hcd->core_if->hfnum_7_frrem_accum, ++ (hcd->core_if->hfnum_7_samples > ++ 0) ? hcd->core_if->hfnum_7_frrem_accum / ++ hcd->core_if->hfnum_7_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_0_samples, ++ hcd->core_if->hfnum_0_frrem_accum, ++ (hcd->core_if->hfnum_0_samples > ++ 0) ? hcd->core_if->hfnum_0_frrem_accum / ++ hcd->core_if->hfnum_0_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_other_samples, ++ hcd->core_if->hfnum_other_frrem_accum, ++ (hcd->core_if->hfnum_other_samples > ++ 0) ? hcd->core_if->hfnum_other_frrem_accum / ++ hcd->core_if->hfnum_other_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, ++ (hcd->hfnum_7_samples_a > 0) ? ++ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, ++ (hcd->hfnum_0_samples_a > 0) ? ++ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, ++ (hcd->hfnum_other_samples_a > 0) ? ++ hcd->hfnum_other_frrem_accum_a / ++ hcd->hfnum_other_samples_a : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, ++ (hcd->hfnum_7_samples_b > 0) ? ++ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, ++ (hcd->hfnum_0_samples_b > 0) ? ++ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, ++ (hcd->hfnum_other_samples_b > 0) ? ++ hcd->hfnum_other_frrem_accum_b / ++ hcd->hfnum_other_samples_b : 0); ++#endif ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h +new file mode 100644 +index 000000000000..4539cd7b802d +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h +@@ -0,0 +1,868 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ ++ * $Revision: #58 $ ++ * $Date: 2011/09/15 $ ++ * $Change: 1846647 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_H__ ++#define __DWC_HCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_list.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_fiq_fsm.h" ++#include "dwc_otg_driver.h" ++ ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Host Contoller Driver (HCD). ++ * ++ * The Host Controller Driver (HCD) is responsible for translating requests ++ * from the USB Driver into the appropriate actions on the DWC_otg controller. ++ * It isolates the USBD from the specifics of the controller by providing an ++ * API to the USBD. ++ */ ++ ++struct dwc_otg_hcd_pipe_info { ++ uint8_t dev_addr; ++ uint8_t ep_num; ++ uint8_t pipe_type; ++ uint8_t pipe_dir; ++ uint16_t mps; ++}; ++ ++struct dwc_otg_hcd_iso_packet_desc { ++ uint32_t offset; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_otg_qtd; ++ ++struct dwc_otg_hcd_urb { ++ void *priv; ++ struct dwc_otg_qtd *qtd; ++ void *buf; ++ dwc_dma_t dma; ++ void *setup_packet; ++ dwc_dma_t setup_dma; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++ uint32_t error_count; ++ uint32_t packet_count; ++ uint32_t flags; ++ uint16_t interval; ++ struct dwc_otg_hcd_pipe_info pipe_info; ++ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; ++}; ++ ++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->ep_num; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->pipe_type; ++} ++ ++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->mps; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->dev_addr; ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_ISOCHRONOUS); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_INTERRUPT); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_BULK); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_CONTROL); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return (pipe->pipe_dir == UE_DIR_IN); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (!dwc_otg_hcd_is_pipe_in(pipe)); ++} ++ ++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t pipe_type, uint8_t pipe_dir, ++ uint16_t mps) ++{ ++ pipe->dev_addr = devaddr; ++ pipe->ep_num = ep_num; ++ pipe->pipe_type = pipe_type; ++ pipe->pipe_dir = pipe_dir; ++ pipe->mps = mps; ++} ++ ++/** ++ * Phases for control transfers. ++ */ ++typedef enum dwc_otg_control_phase { ++ DWC_OTG_CONTROL_SETUP, ++ DWC_OTG_CONTROL_DATA, ++ DWC_OTG_CONTROL_STATUS ++} dwc_otg_control_phase_e; ++ ++/** Transaction types. */ ++typedef enum dwc_otg_transaction_type { ++ DWC_OTG_TRANSACTION_NONE = 0, ++ DWC_OTG_TRANSACTION_PERIODIC = 1, ++ DWC_OTG_TRANSACTION_NON_PERIODIC = 2, ++ DWC_OTG_TRANSACTION_ALL = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC ++} dwc_otg_transaction_type_e; ++ ++struct dwc_otg_qh; ++ ++/** ++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, ++ * interrupt, or isochronous transfer. A single QTD is created for each URB ++ * (of one of these types) submitted to the HCD. The transfer associated with ++ * a QTD may require one or multiple transactions. ++ * ++ * A QTD is linked to a Queue Head, which is entered in either the ++ * non-periodic or periodic schedule for execution. When a QTD is chosen for ++ * execution, some or all of its transactions may be executed. After ++ * execution, the state of the QTD is updated. The QTD may be retired if all ++ * its transactions are complete or if an error occurred. Otherwise, it ++ * remains in the schedule so more transactions can be executed later. ++ */ ++typedef struct dwc_otg_qtd { ++ /** ++ * Determines the PID of the next data packet for the data phase of ++ * control transfers. Ignored for other transfer types.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Current phase for control transfers (Setup, Data, or Status). */ ++ dwc_otg_control_phase_e control_phase; ++ ++ /** Keep track of the current split type ++ * for FS/LS endpoints on a HS Hub */ ++ uint8_t complete_split; ++ ++ /** How many bytes transferred during SSPLIT OUT */ ++ uint32_t ssplit_out_xfer_count; ++ ++ /** ++ * Holds the number of bus errors that have occurred for a transaction ++ * within this transfer. ++ */ ++ uint8_t error_count; ++ ++ /** ++ * Index of the next frame descriptor for an isochronous transfer. A ++ * frame descriptor describes the buffer position and length of the ++ * data to be transferred in the next scheduled (micro)frame of an ++ * isochronous transfer. It also holds status for that transaction. ++ * The frame index starts at 0. ++ */ ++ uint16_t isoc_frame_index; ++ ++ /** Position of the ISOC split on full/low speed */ ++ uint8_t isoc_split_pos; ++ ++ /** Position of the ISOC split in the buffer for the current frame */ ++ uint16_t isoc_split_offset; ++ ++ /** URB for this transfer */ ++ struct dwc_otg_hcd_urb *urb; ++ ++ struct dwc_otg_qh *qh; ++ ++ /** This list of QTDs */ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; ++ ++ /** Indicates if this QTD is currently processed by HW. */ ++ uint8_t in_process; ++ ++ /** Number of DMA descriptors for this QTD */ ++ uint8_t n_desc; ++ ++ /** ++ * Last activated frame(packet) index. ++ * Used in Descriptor DMA mode only. ++ */ ++ uint16_t isoc_frame_index_last; ++ ++} dwc_otg_qtd_t; ++ ++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); ++ ++/** ++ * A Queue Head (QH) holds the static characteristics of an endpoint and ++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may ++ * be entered in either the non-periodic or periodic schedule. ++ */ ++typedef struct dwc_otg_qh { ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - UE_CONTROL ++ * - UE_BULK ++ * - UE_INTERRUPT ++ * - UE_ISOCHRONOUS ++ */ ++ uint8_t ep_type; ++ uint8_t ep_is_in; ++ ++ /** wMaxPacketSize Field of Endpoint Descriptor. */ ++ uint16_t maxp; ++ ++ /** ++ * Device speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ uint8_t dev_speed; ++ ++ /** ++ * Determines the PID of the next data packet for non-control ++ * transfers. Ignored for control transfers.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Ping state if 1. */ ++ uint8_t ping_state; ++ ++ /** ++ * List of QTDs for this QH. ++ */ ++ struct dwc_otg_qtd_list qtd_list; ++ ++ /** Host channel currently processing transfers for this QH. */ ++ struct dwc_hc *channel; ++ ++ /** Full/low speed endpoint on high-speed hub requires split. */ ++ uint8_t do_split; ++ ++ /** @name Periodic schedule information */ ++ /** @{ */ ++ ++ /** Bandwidth in microseconds per (micro)frame. */ ++ uint16_t usecs; ++ ++ /** Interval between transfers in (micro)frames. */ ++ uint16_t interval; ++ ++ /** ++ * (micro)frame to initialize a periodic transfer. The transfer ++ * executes in the following (micro)frame. ++ */ ++ uint16_t sched_frame; ++ ++ /* ++ ** Frame a NAK was received on this queue head, used to minimise NAK retransmission ++ */ ++ uint16_t nak_frame; ++ ++ /** (micro)frame at which last start split was initialized. */ ++ uint16_t start_split_frame; ++ ++ /** @} */ ++ ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ */ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ /** Entry for QH in either the periodic or non-periodic schedule. */ ++ dwc_list_link_t qh_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Descriptor List. */ ++ dwc_otg_host_dma_desc_t *desc_list; ++ ++ /** Descriptor List physical address. */ ++ dwc_dma_t desc_list_dma; ++ ++ /** ++ * Xfer Bytes array. ++ * Each element corresponds to a descriptor and indicates ++ * original XferSize size value for the descriptor. ++ */ ++ uint32_t *n_bytes; ++ ++ /** Actual number of transfer descriptors in a list. */ ++ uint16_t ntd; ++ ++ /** First activated isochronous transfer descriptor index. */ ++ uint8_t td_first; ++ /** Last activated isochronous transfer descriptor index. */ ++ uint8_t td_last; ++ ++ /** @} */ ++ ++ ++ uint16_t speed; ++ uint16_t frame_usecs[8]; ++ ++ uint32_t skip_count; ++} dwc_otg_qh_t; ++ ++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); ++ ++typedef struct urb_tq_entry { ++ struct urb *urb; ++ DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries; ++} urb_tq_entry_t; ++ ++DWC_TAILQ_HEAD(urb_list, urb_tq_entry); ++ ++/** ++ * This structure holds the state of the HCD, including the non-periodic and ++ * periodic schedules. ++ */ ++struct dwc_otg_hcd { ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** DWC OTG Core Interface Layer */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Function HCD driver callbacks */ ++ struct dwc_otg_hcd_function_ops *fops; ++ ++ /** Internal DWC HCD Flags */ ++ volatile union dwc_otg_hcd_internal_flags { ++ uint32_t d32; ++ struct { ++ unsigned port_connect_status_change:1; ++ unsigned port_connect_status:1; ++ unsigned port_reset_change:1; ++ unsigned port_enable_change:1; ++ unsigned port_suspend_change:1; ++ unsigned port_over_current_change:1; ++ unsigned port_l1_change:1; ++ unsigned reserved:26; ++ } b; ++ } flags; ++ ++ /** ++ * Inactive items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are not ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_inactive; ++ ++ /** ++ * Active items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_active; ++ ++ /** ++ * Pointer to the next Queue Head to process in the active ++ * non-periodic schedule. ++ */ ++ dwc_list_link_t *non_periodic_qh_ptr; ++ ++ /** ++ * Inactive items in the periodic schedule. This is a list of QHs for ++ * periodic transfers that are _not_ scheduled for the next frame. ++ * Each QH in the list has an interval counter that determines when it ++ * needs to be scheduled for execution. This scheduling mechanism ++ * allows only a simple calculation for periodic bandwidth used (i.e. ++ * must assume that all periodic transfers may need to execute in the ++ * same frame). However, it greatly simplifies scheduling and should ++ * be sufficient for the vast majority of OTG hosts, which need to ++ * connect to a small number of peripherals at one time. ++ * ++ * Items move from this list to periodic_sched_ready when the QH ++ * interval counter is 0 at SOF. ++ */ ++ dwc_list_link_t periodic_sched_inactive; ++ ++ /** ++ * List of periodic QHs that are ready for execution in the next ++ * frame, but have not yet been assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_assigned as host ++ * channels become available during the current frame. ++ */ ++ dwc_list_link_t periodic_sched_ready; ++ ++ /** ++ * List of periodic QHs to be executed in the next frame that are ++ * assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_queued as the ++ * transactions for the QH are queued to the DWC_otg controller. ++ */ ++ dwc_list_link_t periodic_sched_assigned; ++ ++ /** ++ * List of periodic QHs that have been queued for execution. ++ * ++ * Items move from this list to either periodic_sched_inactive or ++ * periodic_sched_ready when the channel associated with the transfer ++ * is released. If the interval for the QH is 1, the item moves to ++ * periodic_sched_ready because it must be rescheduled for the next ++ * frame. Otherwise, the item moves to periodic_sched_inactive. ++ */ ++ dwc_list_link_t periodic_sched_queued; ++ ++ /** ++ * Total bandwidth claimed so far for periodic transfers. This value ++ * is in microseconds per (micro)frame. The assumption is that all ++ * periodic transfers may occur in the same (micro)frame. ++ */ ++ uint16_t periodic_usecs; ++ ++ /** ++ * Total bandwidth claimed so far for all periodic transfers ++ * in a frame. ++ * This will include a mixture of HS and FS transfers. ++ * Units are microseconds per (micro)frame. ++ * We have a budget per frame and have to schedule ++ * transactions accordingly. ++ * Watch out for the fact that things are actually scheduled for the ++ * "next frame". ++ */ ++ uint16_t frame_usecs[8]; ++ ++ ++ /** ++ * Frame number read from the core at SOF. The value ranges from 0 to ++ * DWC_HFNUM_MAX_FRNUM. ++ */ ++ uint16_t frame_number; ++ ++ /** ++ * Count of periodic QHs, if using several eps. For SOF enable/disable. ++ */ ++ uint16_t periodic_qh_count; ++ ++ /** ++ * Free host channels in the controller. This is a list of ++ * dwc_hc_t items. ++ */ ++ struct hc_list free_hc_list; ++ /** ++ * Number of host channels assigned to periodic transfers. Currently ++ * assuming that there is a dedicated host channel for each periodic ++ * transaction and at least one host channel available for ++ * non-periodic transactions. ++ */ ++ int periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int non_periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int available_host_channels; ++ ++ /** ++ * Array of pointers to the host channel descriptors. Allows accessing ++ * a host channel descriptor given the host channel number. This is ++ * useful in interrupt handlers. ++ */ ++ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; ++ ++ /** ++ * Buffer to use for any data received during the status phase of a ++ * control transfer. Normally no data is transferred during the status ++ * phase. This buffer is used as a bit bucket. ++ */ ++ uint8_t *status_buf; ++ ++ /** ++ * DMA address for status_buf. ++ */ ++ dma_addr_t status_buf_dma; ++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 ++ ++ /** ++ * Connection timer. An OTG host must display a message if the device ++ * does not connect. Started when the VBus power is turned on via ++ * sysfs attribute "buspower". ++ */ ++ dwc_timer_t *conn_timer; ++ ++ /* Tasket to do a reset */ ++ dwc_tasklet_t *reset_tasklet; ++ ++ dwc_tasklet_t *completion_tasklet; ++ struct urb_list completed_urb_list; ++ ++ /* */ ++ dwc_spinlock_t *lock; ++ dwc_spinlock_t *channel_lock; ++ /** ++ * Private data that could be used by OS wrapper. ++ */ ++ void *priv; ++ ++ uint8_t otg_port; ++ ++ /** Frame List */ ++ uint32_t *frame_list; ++ ++ /** Hub - Port assignment */ ++ int hub_port[128]; ++#ifdef FIQ_DEBUG ++ int hub_port_alloc[2048]; ++#endif ++ ++ /** Frame List DMA address */ ++ dma_addr_t frame_list_dma; ++ ++ struct fiq_stack *fiq_stack; ++ struct fiq_state *fiq_state; ++ ++ /** Virtual address for split transaction DMA bounce buffers */ ++ struct fiq_dma_blob *fiq_dmab; ++ ++#ifdef DEBUG ++ uint32_t frrem_samples; ++ uint64_t frrem_accum; ++ ++ uint32_t hfnum_7_samples_a; ++ uint64_t hfnum_7_frrem_accum_a; ++ uint32_t hfnum_0_samples_a; ++ uint64_t hfnum_0_frrem_accum_a; ++ uint32_t hfnum_other_samples_a; ++ uint64_t hfnum_other_frrem_accum_a; ++ ++ uint32_t hfnum_7_samples_b; ++ uint64_t hfnum_7_frrem_accum_b; ++ uint32_t hfnum_0_samples_b; ++ uint64_t hfnum_0_frrem_accum_b; ++ uint32_t hfnum_other_samples_b; ++ uint64_t hfnum_other_frrem_accum_b; ++#endif ++}; ++ ++static inline struct device *dwc_otg_hcd_to_dev(struct dwc_otg_hcd *hcd) ++{ ++ return &hcd->otg_dev->os_dep.platformdev->dev; ++} ++ ++/** @name Transaction Execution Functions */ ++/** @{ */ ++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t ++ * hcd); ++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type); ++ ++int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh); ++void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh); ++ ++extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); ++extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh); ++extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num); ++ ++/** @} */ ++ ++/** @name Interrupt Handler Functions */ ++/** @{ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint32_t num); ++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++/** @} */ ++ ++/** @name Schedule Queue Functions */ ++/** @{ */ ++ ++/* Implemented in dwc_otg_hcd_queue.c */ ++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc); ++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_csplit); ++ ++/** Remove and free a QH */ ++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ dwc_otg_hcd_qh_free(hcd, qh); ++} ++ ++/** Allocates memory for a QH structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t)); ++ else ++ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t)); ++} ++ ++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, ++ int atomic_alloc); ++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); ++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_qh_t ** qh, int atomic_alloc); ++ ++/** Allocates memory for a QTD structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t)); ++ else ++ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t)); ++} ++ ++/** Frees the memory for a QTD structure. QTD should already be removed from ++ * list. ++ * @param qtd QTD to free.*/ ++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) ++{ ++ DWC_FREE(qtd); ++} ++ ++/** Removes a QTD from list. ++ * @param hcd HCD instance. ++ * @param qtd QTD to remove from list. ++ * @param qh QTD belongs to. ++ */ ++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++} ++ ++/** Remove and free a QTD ++ * Need to disable IRQ and hold hcd lock while calling this function out of ++ * interrupt servicing chain */ ++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); ++ dwc_otg_hcd_qtd_free(qtd); ++} ++ ++/** @} */ ++ ++/** @name Descriptor DMA Supporting Functions */ ++/** @{ */ ++ ++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status); ++ ++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++ ++/** @} */ ++ ++/** @name Internal Functions */ ++/** @{ */ ++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); ++/** @} */ ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, ++ uint8_t devaddr); ++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); ++#endif ++ ++/** Gets the QH that contains the list_head */ ++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) ++ ++/** Gets the QTD that contains the list_head */ ++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) ++ ++/** Check if QH is non-periodic */ ++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ ++ (_qh_ptr_->ep_type == UE_CONTROL)) ++ ++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ ++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) ++ ++/** Packet size for any kind of endpoint descriptor */ ++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) ++ ++/** ++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is ++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the ++ * frame number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) ++{ ++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= ++ (DWC_HFNUM_MAX_FRNUM >> 1); ++} ++ ++/** ++ * Returns true if _frame1 is greater than _frame2. The comparison is done ++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame ++ * number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) ++{ ++ return (frame1 != frame2) && ++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < ++ (DWC_HFNUM_MAX_FRNUM >> 1)); ++} ++ ++/** ++ * Increments _frame by the amount specified by _inc. The addition is done ++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. ++ */ ++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) ++{ ++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; ++} ++ ++static inline uint16_t dwc_full_frame_num(uint16_t frame) ++{ ++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; ++} ++ ++static inline uint16_t dwc_micro_frame_num(uint16_t frame) ++{ ++ return frame & 0x7; ++} ++ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd); ++ ++#ifdef DEBUG ++/** ++ * Macro to sample the remaining PHY clocks left in the current frame. This ++ * may be used during debugging to determine the average time it takes to ++ * execute sections of code. There are two possible sample points, "a" and ++ * "b", so the _letter argument must be one of these values. ++ * ++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For ++ * example, "cat /sys/devices/lm0/hcd_frrem". ++ */ ++#define dwc_sample_frrem(_hcd, _qh, _letter) \ ++{ \ ++ hfnum_data_t hfnum; \ ++ dwc_otg_qtd_t *qtd; \ ++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ ++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ ++ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ ++ switch (hfnum.b.frnum & 0x7) { \ ++ case 7: \ ++ _hcd->hfnum_7_samples_##_letter++; \ ++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ case 0: \ ++ _hcd->hfnum_0_samples_##_letter++; \ ++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ default: \ ++ _hcd->hfnum_other_samples_##_letter++; \ ++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ } \ ++ } \ ++} ++#else ++#define dwc_sample_frrem(_hcd, _qh, _letter) ++#endif ++#endif ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c +new file mode 100644 +index 000000000000..126e99ab2fc4 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c +@@ -0,0 +1,1139 @@ ++/*========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ ++ * $Revision: #10 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869464 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file contains Descriptor DMA support implementation for host mode. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++static inline uint8_t frame_list_idx(uint16_t frame) ++{ ++ return (frame & (MAX_FRLIST_EN_NUM - 1)); ++} ++ ++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx + inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx - inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) ++{ ++ return (((qh->ep_type == UE_ISOCHRONOUS) ++ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) ++ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC); ++} ++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) ++{ ++ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) ++ ? ((qh->interval + 8 - 1) / 8) ++ : qh->interval); ++} ++ ++static int desc_list_alloc(struct device *dev, dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ qh->desc_list = (dwc_otg_host_dma_desc_t *) ++ DWC_DMA_ALLOC(dev, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), ++ &qh->desc_list_dma); ++ ++ if (!qh->desc_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); ++ ++ } ++ ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ ++ qh->n_bytes = ++ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh)); ++ ++ if (!qh->n_bytes) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR ++ ("%s: Failed to allocate array for descriptors' size actual values\n", ++ __func__); ++ ++ } ++ return retval; ++ ++} ++ ++static void desc_list_free(struct device *dev, dwc_otg_qh_t * qh) ++{ ++ if (qh->desc_list) { ++ DWC_DMA_FREE(dev, max_desc_num(qh), qh->desc_list, ++ qh->desc_list_dma); ++ qh->desc_list = NULL; ++ } ++ ++ if (qh->n_bytes) { ++ DWC_FREE(qh->n_bytes); ++ qh->n_bytes = NULL; ++ } ++} ++ ++static int frame_list_alloc(dwc_otg_hcd_t * hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ ++ if (hcd->frame_list) ++ return 0; ++ ++ hcd->frame_list = DWC_DMA_ALLOC(dev, 4 * MAX_FRLIST_EN_NUM, ++ &hcd->frame_list_dma); ++ if (!hcd->frame_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: Frame List allocation failed\n", __func__); ++ } ++ ++ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); ++ ++ return retval; ++} ++ ++static void frame_list_free(dwc_otg_hcd_t * hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ if (!hcd->frame_list) ++ return; ++ ++ DWC_DMA_FREE(dev, 4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); ++ hcd->frame_list = NULL; ++} ++ ++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) ++{ ++ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (hcfg.b.perschedena) { ++ /* already enabled */ ++ return; ++ } ++ ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr, ++ hcd->frame_list_dma); ++ ++ switch (fr_list_en) { ++ case 64: ++ hcfg.b.frlisten = 3; ++ break; ++ case 32: ++ hcfg.b.frlisten = 2; ++ break; ++ case 16: ++ hcfg.b.frlisten = 1; ++ break; ++ case 8: ++ hcfg.b.frlisten = 0; ++ break; ++ default: ++ break; ++ } ++ ++ hcfg.b.perschedena = 1; ++ ++ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++ ++} ++ ++static void per_sched_disable(dwc_otg_hcd_t * hcd) ++{ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (!hcfg.b.perschedena) { ++ /* already disabled */ ++ return; ++ } ++ hcfg.b.perschedena = 0; ++ ++ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/* ++ * Activates/Deactivates FrameList entries for the channel ++ * based on endpoint servicing period. ++ */ ++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) ++{ ++ uint16_t i, j, inc; ++ dwc_hc_t *hc = NULL; ++ ++ if (!qh->channel) { ++ DWC_ERROR("qh->channel = %p", qh->channel); ++ return; ++ } ++ ++ if (!hcd) { ++ DWC_ERROR("------hcd = %p", hcd); ++ return; ++ } ++ ++ if (!hcd->frame_list) { ++ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list); ++ return; ++ } ++ ++ hc = qh->channel; ++ inc = frame_incr_val(qh); ++ if (qh->ep_type == UE_ISOCHRONOUS) ++ i = frame_list_idx(qh->sched_frame); ++ else ++ i = 0; ++ ++ j = i; ++ do { ++ if (enable) ++ hcd->frame_list[j] |= (1 << hc->hc_num); ++ else ++ hcd->frame_list[j] &= ~(1 << hc->hc_num); ++ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); ++ } ++ while (j != i); ++ if (!enable) ++ return; ++ hc->schinfo = 0; ++ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { ++ j = 1; ++ /* TODO - check this */ ++ inc = (8 + qh->interval - 1) / qh->interval; ++ for (i = 0; i < inc; i++) { ++ hc->schinfo |= j; ++ j = j << qh->interval; ++ } ++ } else { ++ hc->schinfo = 0xff; ++ } ++} ++ ++#if 1 ++void dump_frame_list(dwc_otg_hcd_t * hcd) ++{ ++ int i = 0; ++ DWC_PRINTF("--FRAME LIST (hex) --\n"); ++ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { ++ DWC_PRINTF("%x\t", hcd->frame_list[i]); ++ if (!(i % 8) && i) ++ DWC_PRINTF("\n"); ++ } ++ DWC_PRINTF("\n----\n"); ++ ++} ++#endif ++ ++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ ++ dwc_hc_t *hc = qh->channel; ++ if (dwc_qh_is_non_per(qh)) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (!microframe_schedule) ++ hcd->non_periodic_channels--; ++ else ++ hcd->available_host_channels++; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } else ++ update_frame_list(hcd, qh, 0); ++ ++ /* ++ * The condition is added to prevent double cleanup try in case of device ++ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). ++ */ ++ if (hc->qh) { ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ hc->qh = NULL; ++ } ++ ++ qh->channel = NULL; ++ qh->ntd = 0; ++ ++ if (qh->desc_list) { ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ } ++} ++ ++/** ++ * Initializes a QH structure's Descriptor DMA related members. ++ * Allocates memory for descriptor list. ++ * On first periodic QH, allocates memory for FrameList ++ * and enables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ ++ if (qh->do_split) { ++ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); ++ return -1; ++ } ++ ++ retval = desc_list_alloc(dev, qh); ++ ++ if ((retval == 0) ++ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { ++ if (!hcd->frame_list) { ++ retval = frame_list_alloc(hcd); ++ /* Enable periodic schedule on first periodic QH */ ++ if (retval == 0) ++ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); ++ } ++ } ++ ++ qh->ntd = 0; ++ ++ return retval; ++} ++ ++/** ++ * Frees descriptor list memory associated with the QH. ++ * If QH is periodic and the last, frees FrameList memory ++ * and disables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ */ ++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ desc_list_free(dev, qh); ++ ++ /* ++ * Channel still assigned due to some reasons. ++ * Seen on Isoc URB dequeue. Channel halted but no subsequent ++ * ChHalted interrupt to release the channel. Afterwards ++ * when it comes here from endpoint disable routine ++ * channel remains assigned. ++ */ ++ if (qh->channel) ++ release_channel_ddma(hcd, qh); ++ ++ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) ++ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) { ++ ++ per_sched_disable(hcd); ++ frame_list_free(hcd); ++ } ++} ++ ++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) ++{ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Descriptor set(8 descriptors) index ++ * which is 8-aligned. ++ */ ++ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; ++ } else { ++ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); ++ } ++} ++ ++/* ++ * Determine starting frame for Isochronous transfer. ++ * Few frames skipped to prevent race condition with HC. ++ */ ++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t * skip_frames) ++{ ++ uint16_t frame = 0; ++ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ ++ ++ /* ++ * skip_frames is used to limit activated descriptors number ++ * to avoid the situation when HC services the last activated ++ * descriptor firstly. ++ * Example for FS: ++ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor ++ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 ++ * will be fetched. If the number of descriptors is max=64 (or greather) the ++ * list will be fully programmed with Active descriptors and it is possible ++ * case(rare) that the latest descriptor(considering rollback) corresponding ++ * to frame 2 will be serviced first. HS case is more probable because, in fact, ++ * up to 11 uframes(16 in the code) may be skipped. ++ */ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Consider uframe counter also, to start xfer asap. ++ * If half of the frame elapsed skip 2 frames otherwise ++ * just 1 frame. ++ * Starting descriptor index must be 8-aligned, so ++ * if the current frame is near to complete the next one ++ * is skipped as well. ++ */ ++ ++ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { ++ *skip_frames = 2 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } else { ++ *skip_frames = 1 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } ++ ++ frame = dwc_full_frame_num(frame); ++ } else { ++ /* ++ * Two frames are skipped for FS - the current and the next. ++ * But for descriptor programming, 1 frame(descriptor) is enough, ++ * see example above. ++ */ ++ *skip_frames = 1; ++ frame = dwc_frame_num_inc(hcd->frame_number, 2); ++ } ++ ++ return frame; ++} ++ ++/* ++ * Calculate initial descriptor index for isochronous transfer ++ * based on scheduled frame. ++ */ ++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ uint16_t frame = 0, fr_idx, fr_idx_tmp; ++ uint8_t skip_frames = 0; ++ /* ++ * With current ISOC processing algorithm the channel is being ++ * released when no more QTDs in the list(qh->ntd == 0). ++ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. ++ * ++ * So qh->channel != NULL branch is not used and just not removed from the ++ * source file. It is required for another possible approach which is, ++ * do not disable and release the channel when ISOC session completed, ++ * just move QH to inactive schedule until new QTD arrives. ++ * On new QTD, the QH moved back to 'ready' schedule, ++ * starting frame and therefore starting desc_index are recalculated. ++ * In this case channel is released only on ep_disable. ++ */ ++ ++ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ ++ if (qh->channel) { ++ frame = calc_starting_frame(hcd, qh, &skip_frames); ++ /* ++ * Calculate initial descriptor index based on FrameList current bitmap ++ * and servicing period. ++ */ ++ fr_idx_tmp = frame_list_idx(frame); ++ fr_idx = ++ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - ++ fr_idx_tmp) ++ % frame_incr_val(qh); ++ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; ++ } else { ++ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); ++ fr_idx = frame_list_idx(qh->sched_frame); ++ } ++ ++ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); ++ ++ return skip_frames; ++} ++ ++#define ISOC_URB_GIVEBACK_ASAP ++ ++#define MAX_ISOC_XFER_SIZE_FS 1023 ++#define MAX_ISOC_XFER_SIZE_HS 3072 ++#define DESCNUM_THRESHOLD 4 ++ ++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t skip_frames) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; ++ ++ idx = qh->td_last; ++ inc = qh->interval; ++ n_desc = 0; ++ ++ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; ++ if (skip_frames && !qh->channel) ++ ntd_max = ntd_max - skip_frames / qh->interval; ++ ++ max_xfer_size = ++ (qh->dev_speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS : ++ MAX_ISOC_XFER_SIZE_FS; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ while ((qh->ntd < ntd_max) ++ && (qtd->isoc_frame_index_last < ++ qtd->urb->packet_count)) { ++ ++ dma_desc = &qh->desc_list[idx]; ++ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; ++ ++ if (frame_desc->length > max_xfer_size) ++ qh->n_bytes[idx] = max_xfer_size; ++ else ++ qh->n_bytes[idx] = frame_desc->length; ++ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; ++ dma_desc->status.b_isoc.a = 1; ++ dma_desc->status.b_isoc.sts = 0; ++ ++ dma_desc->buf = qtd->urb->dma + frame_desc->offset; ++ ++ qh->ntd++; ++ ++ qtd->isoc_frame_index_last++; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* ++ * Set IOC for each descriptor corresponding to the ++ * last frame of the URB. ++ */ ++ if (qtd->isoc_frame_index_last == ++ qtd->urb->packet_count) ++ dma_desc->status.b_isoc.ioc = 1; ++ ++#endif ++ idx = desclist_idx_inc(idx, inc, qh->dev_speed); ++ n_desc++; ++ ++ } ++ qtd->in_process = 1; ++ } ++ ++ qh->td_last = idx; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* Set IOC for the last descriptor if descriptor list is full */ ++ if (qh->ntd == ntd_max) { ++ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++ } ++#else ++ /* ++ * Set IOC bit only for one descriptor. ++ * Always try to be ahead of HW processing, ++ * i.e. on IOC generation driver activates next descriptors but ++ * core continues to process descriptors followed the one with IOC set. ++ */ ++ ++ if (n_desc > DESCNUM_THRESHOLD) { ++ /* ++ * Move IOC "up". Required even if there is only one QTD ++ * in the list, cause QTDs migth continue to be queued, ++ * but during the activation it was only one queued. ++ * Actually more than one QTD might be in the list if this function called ++ * from XferCompletion - QTDs was queued during HW processing of the previous ++ * descriptor chunk. ++ */ ++ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); ++ } else { ++ /* ++ * Set the IOC for the latest descriptor ++ * if either number of descriptor is not greather than threshold ++ * or no more new descriptors activated. ++ */ ++ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ } ++ ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++#endif ++} ++ ++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ ++ dwc_hc_t *hc; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ dwc_otg_qtd_t *qtd; ++ int num_packets, len, n_desc = 0; ++ ++ hc = qh->channel; ++ ++ /* ++ * Start with hc->xfer_buff initialized in ++ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, ++ * this pointer re-assigned to the buffer of the currently processed QTD. ++ * For non-SG request there is always one QTD active. ++ */ ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ ++ if (n_desc) { ++ /* SG request - more than 1 QTDs */ ++ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; ++ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; ++ } ++ ++ qtd->n_desc = 0; ++ ++ do { ++ dma_desc = &qh->desc_list[n_desc]; ++ len = hc->xfer_len; ++ ++ if (len > MAX_DMA_DESC_SIZE) ++ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; ++ ++ if (hc->ep_is_in) { ++ if (len > 0) { ++ num_packets = (len + hc->max_packet - 1) / hc->max_packet; ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ /* Always program an integral # of max packets for IN transfers. */ ++ len = num_packets * hc->max_packet; ++ } ++ ++ dma_desc->status.b.n_bytes = len; ++ ++ qh->n_bytes[n_desc] = len; ++ ++ if ((qh->ep_type == UE_CONTROL) ++ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) ++ dma_desc->status.b.sup = 1; /* Setup Packet */ ++ ++ dma_desc->status.b.a = 1; /* Active descriptor */ ++ dma_desc->status.b.sts = 0; ++ ++ dma_desc->buf = ++ ((unsigned long)hc->xfer_buff & 0xffffffff); ++ ++ /* ++ * Last descriptor(or single) of IN transfer ++ * with actual size less than MaxPacket. ++ */ ++ if (len > hc->xfer_len) { ++ hc->xfer_len = 0; ++ } else { ++ hc->xfer_buff += len; ++ hc->xfer_len -= len; ++ } ++ ++ qtd->n_desc++; ++ n_desc++; ++ } ++ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); ++ ++ ++ qtd->in_process = 1; ++ ++ if (qh->ep_type == UE_CONTROL) ++ break; ++ ++ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) ++ break; ++ } ++ ++ if (n_desc) { ++ /* Request Transfer Complete interrupt for the last descriptor */ ++ qh->desc_list[n_desc - 1].status.b.ioc = 1; ++ /* End of List indicator */ ++ qh->desc_list[n_desc - 1].status.b.eol = 1; ++ ++ hc->ntd = n_desc; ++ } ++} ++ ++/** ++ * For Control and Bulk endpoints initializes descriptor list ++ * and starts the transfer. ++ * ++ * For Interrupt and Isochronous endpoints initializes descriptor list ++ * then updates FrameList, marking appropriate entries as active. ++ * In case of Isochronous, the starting descriptor index is calculated based ++ * on the scheduled frame, but only on the first transfer descriptor within a session. ++ * Then starts the transfer via enabling the channel. ++ * For Isochronous endpoint the channel is not halted on XferComplete ++ * interrupt so remains assigned to the endpoint(QH) until session is done. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ /* Channel is already assigned */ ++ dwc_hc_t *hc = qh->channel; ++ uint8_t skip_frames = 0; ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ update_frame_list(hcd, qh, 1); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ ++ if (!qh->ntd) ++ skip_frames = recalc_initial_desc_idx(hcd, qh); ++ ++ init_isoc_dma_desc(hcd, qh, skip_frames); ++ ++ if (!hc->xfer_started) { ++ ++ update_frame_list(hcd, qh, 1); ++ ++ /* ++ * Always set to max, instead of actual size. ++ * Otherwise ntd will be changed with ++ * channel being enabled. Not recommended. ++ * ++ */ ++ hc->ntd = max_desc_num(qh); ++ /* Enable channel only once for ISOC */ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ } ++ ++ break; ++ default: ++ ++ break; ++ } ++} ++ ++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, remain; ++ uint8_t urb_compl; ++ ++ qh = hc->qh; ++ idx = qh->td_first; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) ++ qtd->in_process = 0; ++ return; ++ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || ++ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { ++ /* ++ * Channel is halted in these error cases. ++ * Considered as serious issues. ++ * Complete all URBs marking all frames as failed, ++ * irrespective whether some of the descriptors(frames) succeeded or no. ++ * Pass error code to completion routine as well, to ++ * update urb->status, some of class drivers might use it to stop ++ * queing transfer requests. ++ */ ++ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) ++ ? (-DWC_E_IO) ++ : (-DWC_E_OVERFLOW); ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ for (idx = 0; idx < qtd->urb->packet_count; idx++) { ++ frame_desc = &qtd->urb->iso_descs[idx]; ++ frame_desc->status = err; ++ } ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ ++ if (!qtd->in_process) ++ break; ++ ++ urb_compl = 0; ++ ++ do { ++ ++ dma_desc = &qh->desc_list[idx]; ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; ++ ++ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { ++ /* ++ * XactError or, unable to complete all the transactions ++ * in the scheduled micro-frame/frame, ++ * both indicated by DMA_DESC_STS_PKTERR. ++ */ ++ qtd->urb->error_count++; ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ /* Success */ ++ ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = 0; ++ } ++ ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers here. ++ * The individual frame_desc status are used instead. ++ */ ++ ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ /* ++ * This check is necessary because urb_dequeue can be called ++ * from urb complete callback(sound driver example). ++ * All pending URBs are dequeued there, so no need for ++ * further processing. ++ */ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ return; ++ } ++ ++ urb_compl = 1; ++ ++ } ++ ++ qh->ntd--; ++ ++ /* Stop if IOC requested descriptor reached */ ++ if (dma_desc->status.b_isoc.ioc) { ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ goto stop_scan; ++ } ++ ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ ++ if (urb_compl) ++ break; ++ } ++ while (idx != qh->td_first); ++ } ++stop_scan: ++ qh->td_first = idx; ++} ++ ++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_host_dma_desc_t * dma_desc, ++ dwc_otg_halt_status_e halt_status, ++ uint32_t n_bytes, uint8_t * xfer_done) ++{ ++ ++ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ urb->status = -DWC_E_IO; ++ return 1; ++ } ++ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_STALL: ++ urb->status = -DWC_E_PIPE; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->status = -DWC_E_OVERFLOW; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->status = -DWC_E_PROTOCOL; ++ break; ++ default: ++ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, ++ halt_status); ++ break; ++ } ++ return 1; ++ } ++ ++ if (dma_desc->status.b.a == 1) { ++ DWC_DEBUGPL(DBG_HCDV, ++ "Active descriptor encountered on channel %d\n", ++ hc->hc_num); ++ return 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ /* ++ * For Control Data stage do not set urb->status=0 to prevent ++ * URB callback. Set it when Status phase done. See below. ++ */ ++ *xfer_done = 1; ++ } ++ ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ /* No handling for SETUP stage */ ++ } else { ++ /* BULK and INTR */ ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = NULL; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint32_t n_bytes, n_desc, i; ++ uint8_t failed = 0, xfer_done; ++ ++ n_desc = 0; ++ ++ qh = hc->qh; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ qtd->in_process = 0; ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ ++ urb = qtd->urb; ++ ++ n_bytes = 0; ++ xfer_done = 0; ++ ++ for (i = 0; i < qtd->n_desc; i++) { ++ dma_desc = &qh->desc_list[n_desc]; ++ ++ n_bytes = qh->n_bytes[n_desc]; ++ ++ failed = ++ update_non_isoc_urb_state_ddma(hcd, hc, qtd, ++ dma_desc, ++ halt_status, n_bytes, ++ &xfer_done); ++ ++ if (failed ++ || (xfer_done ++ && (urb->status != -DWC_E_IN_PROGRESS))) { ++ ++ hcd->fops->complete(hcd, urb->priv, urb, ++ urb->status); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ if (failed) ++ goto stop_scan; ++ } else if (qh->ep_type == UE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ if (xfer_done) { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); ++ } else if (i + 1 == qtd->n_desc) { ++ /* ++ * Last descriptor for Control data stage which is ++ * not completed yet. ++ */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ } ++ } ++ ++ n_desc++; ++ } ++ ++ } ++ ++stop_scan: ++ ++ if (qh->ep_type != UE_CONTROL) { ++ /* ++ * Resetting the data toggle for bulk ++ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() ++ */ ++ if (halt_status == DWC_OTG_HC_XFER_STALL) ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ else ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ hcint_data_t hcint; ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. It ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ } ++ ++} ++ ++/** ++ * This function is called from interrupt handlers. ++ * Scans the descriptor list, updates URB's status and ++ * calls completion routine for the URB if it's done. ++ * Releases the channel to be used by other transfers. ++ * In case of Isochronous endpoint the channel is not halted until ++ * the end of the session, i.e. QTD list is empty. ++ * If periodic channel released the FrameList is updated accordingly. ++ * ++ * Calls transaction selection routines to activate pending transfers. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param hc Host channel, the transfer is completed on. ++ * @param hc_regs Host channel registers. ++ * @param halt_status Reason the channel is being halted, ++ * or just XferComplete for isochronous transfer ++ */ ++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint8_t continue_isoc_xfer = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qh_t *qh = hc->qh; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ ++ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ /* Release the channel if halted or session completed */ ++ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || ++ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ ++ /* Halt the channel if session completed */ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ } ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* Keep in assigned schedule to continue transfer */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ continue_isoc_xfer = 1; ++ ++ } ++ /** @todo Consider the case when period exceeds FrameList size. ++ * Frame Rollover interrupt should be used. ++ */ ++ } else { ++ /* Scan descriptor list to complete the URB(s), then release the channel */ ++ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule on normal completion */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { ++ if (continue_isoc_xfer) { ++ if (tr_type == DWC_OTG_TRANSACTION_NONE) { ++ tr_type = DWC_OTG_TRANSACTION_PERIODIC; ++ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { ++ tr_type = DWC_OTG_TRANSACTION_ALL; ++ } ++ } ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +new file mode 100644 +index 000000000000..fb57db09378f +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -0,0 +1,417 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_IF_H__ ++#define __DWC_HCD_IF_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG HCD Core API. ++ */ ++ ++struct dwc_otg_hcd; ++typedef struct dwc_otg_hcd dwc_otg_hcd_t; ++ ++struct dwc_otg_hcd_urb; ++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; ++ ++/** @name HCD Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function is called whenever core switches to host mode. */ ++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** This function is called when device has been disconnected */ ++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ ++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ uint32_t * hub_addr, ++ uint32_t * port_addr); ++/** Via this function HCD core gets device speed */ ++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle); ++ ++/** This function is called when urb is completed */ ++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int32_t status); ++ ++/** Via this function HCD core gets b_hnp_enable parameter */ ++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); ++ ++struct dwc_otg_hcd_function_ops { ++ dwc_otg_hcd_start_cb_t start; ++ dwc_otg_hcd_disconnect_cb_t disconnect; ++ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; ++ dwc_otg_hcd_speed_from_urb_cb_t speed; ++ dwc_otg_hcd_complete_urb_cb_t complete; ++ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; ++}; ++/** @} */ ++ ++/** @name HCD Core API */ ++/** @{ */ ++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ ++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); ++ ++/** This function should be called to initiate HCD Core. ++ * ++ * @param hcd The HCD ++ * @param core_if The DWC_OTG Core ++ * ++ * Returns -DWC_E_NO_MEMORY if no enough memory. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); ++ ++/** Frees HCD ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); ++ ++/** This function should be called on every hardware interrupt. ++ * ++ * @param dwc_otg_hcd The HCD ++ * ++ * Returns non zero if interrupt is handled ++ * Return 0 if interrupt is not handled ++ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++ ++/** This function is used to handle the fast interrupt ++ * ++ */ ++extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); ++ ++/** ++ * Returns private data set by ++ * dwc_otg_hcd_set_priv_data function. ++ * ++ * @param hcd The HCD ++ */ ++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Set private data. ++ * ++ * @param hcd The HCD ++ * @param priv_data pointer to be stored in private data ++ */ ++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); ++ ++/** ++ * This function initializes the HCD Core. ++ * ++ * @param hcd The HCD ++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. ++ * ++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops); ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Handles hub class-specific requests. ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param typeReq Request Type ++ * @param wValue wValue from control request ++ * @param wIndex wIndex from control request ++ * @param buf data buffer ++ * @param wLength data buffer length ++ * ++ * Returns -DWC_E_INVALID if invalid argument is passed ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, ++ uint16_t wLength); ++ ++/** ++ * Returns otg port number. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns OTG version - either 1.3 or 2.0. ++ * ++ * @param core_if The core_if structure pointer ++ */ ++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Returns 1 if currently core is acting as B host, and 0 otherwise. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns current frame number. ++ * ++ * @param hcd The HCD ++ */ ++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dumps hcd state. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ * Currently this function is not implemented. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Sends LPM transaction to the local device. ++ * ++ * @param hcd The HCD ++ * @param devaddr Device Address ++ * @param hird Host initiated resume duration ++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction ++ * ++ * Returns negative value if sending LPM transaction was not succeeded. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, ++ uint8_t hird, uint8_t bRemoteWake); ++ ++/* URB interface */ ++ ++/** ++ * Allocates memory for dwc_otg_hcd_urb structure. ++ * Allocated memory should be freed by call of DWC_FREE. ++ * ++ * @param hcd The HCD ++ * @param iso_desc_count Count of ISOC descriptors ++ * @param atomic_alloc Specefies whether to perform atomic allocation. ++ */ ++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, ++ int atomic_alloc); ++ ++/** ++ * Set pipe information in URB. ++ * ++ * @param hcd_urb DWC_OTG URB ++ * @param devaddr Device Address ++ * @param ep_num Endpoint Number ++ * @param ep_type Endpoint Type ++ * @param ep_dir Endpoint Direction ++ * @param mps Max Packet Size ++ */ ++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, ++ uint16_t mps); ++ ++/* Transfer flags */ ++#define URB_GIVEBACK_ASAP 0x1 ++#define URB_SEND_ZERO_PACKET 0x2 ++ ++/** ++ * Sets dwc_otg_hcd_urb parameters. ++ * ++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. ++ * @param urb_handle Unique handle for request, this will be passed back ++ * to function driver in completion callback. ++ * @param buf The buffer for the data ++ * @param dma The DMA buffer for the data ++ * @param buflen Transfer length ++ * @param sp Buffer for setup data ++ * @param sp_dma DMA address of setup data buffer ++ * @param flags Transfer flags ++ * @param interval Polling interval for interrupt or isochronous transfers. ++ */ ++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, ++ void *urb_handle, void *buf, ++ dwc_dma_t dma, uint32_t buflen, void *sp, ++ dwc_dma_t sp_dma, uint32_t flags, ++ uint16_t interval); ++ ++/** Gets status from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Gets actual length from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Set ISOC descriptor offset and length ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ * @param offset Offset from beginig of buffer. ++ * @param length Transaction length ++ */ ++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length); ++ ++/** Get status of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num); ++ ++/** Get actual length of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, ++ int desc_num); ++ ++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param ep_handle Out parameter for returning endpoint handle ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * Returns -DWC_E_NO_DEVICE if no device is connected. ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void **ep_handle, int atomic_alloc); ++ ++/** De-queue the specified URB ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Frees resources in the DWC_otg controller related to a given endpoint. ++ * Any URBs for the endpoint must already be dequeued. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * @param retry Number of retries if there are queued transfers. ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry); ++ ++/* Resets the data toggle in qh structure. This function can be called from ++ * usb_clear_halt routine. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns 1 if status of specified port is changed and 0 otherwise. ++ * ++ * @param hcd The HCD ++ * @param port Port number ++ */ ++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); ++ ++/** Call this function to check if bandwidth was allocated for specified endpoint. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** Call this function to check if bandwidth was freed for specified endpoint. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns bandwidth allocated for specified endpoint in microseconds. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** @} */ ++ ++#endif /* __DWC_HCD_IF_H__ */ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +new file mode 100644 +index 000000000000..e6b38ac330b7 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -0,0 +1,2727 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ ++ * $Revision: #89 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869487 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++#include ++#include ++ ++ ++extern bool microframe_schedule; ++ ++/** @file ++ * This file contains the implementation of the HCD Interrupt handlers. ++ */ ++ ++int fiq_done, int_done; ++ ++#ifdef FIQ_DEBUG ++char buffer[1000*16]; ++int wptr; ++void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...) ++{ ++ FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB; ++ va_list args; ++ char text[17]; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) }; ++ ++ if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR) ++ { ++ local_fiq_disable(); ++ snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937); ++ va_start(args, fmt); ++ vsnprintf(text+8, 9, fmt, args); ++ va_end(args); ++ ++ memcpy(buffer + wptr, text, 16); ++ wptr = (wptr + 16) % sizeof(buffer); ++ local_fiq_enable(); ++ } ++} ++#endif ++ ++/** This function handles interrupts for the HCD. */ ++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ static int last_time; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ hfnum_data_t hfnum; ++ haintmsk_data_t haintmsk; ++ ++#ifdef DEBUG ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++#endif ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ goto exit_handler_routine; ++ } ++ DWC_SPINLOCK(dwc_otg_hcd->lock); ++ /* Check if HOST Mode */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ /* Pull in from the FIQ's disabled mask */ ++ gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32); ++ dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0; ++ } ++ ++ if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) { ++ gintsts.b.hcintr = 1; ++ } ++ ++ /* Danger will robinson: fake a SOF if necessary */ ++ if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) { ++ gintsts.b.sofintr = 1; ++ } ++ gintsts.d32 &= gintmsk.d32; ++ ++ if (fiq_enable) { ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ if (!gintsts.d32) { ++ goto exit_handler_routine; ++ } ++ ++#ifdef DEBUG ++ // We should be OK doing this because the common interrupts should already have been serviced ++ /* Don't print debug message in the interrupt handler on SOF */ ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", ++ gintsts.d32, core_if); ++#endif ++ hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum); ++ if (gintsts.b.sofintr) { ++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); ++ } ++ ++ if (gintsts.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_hcd_handle_rx_status_q_level_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.nptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_np_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.i2cintr) { ++ /** @todo Implement i2cintr handler. */ ++ } ++ if (gintsts.b.portintr) { ++ ++ gintmsk_data_t gintmsk = { .b.portintr = 1}; ++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++ if (gintsts.b.hcintr) { ++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.ptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ { ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Finished Servicing Interrupts\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintsts)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintmsk)); ++ } ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++ } ++ ++exit_handler_routine: ++ if (fiq_enable) { ++ gintmsk_data_t gintmsk_new; ++ haintmsk_data_t haintmsk_new; ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32; ++ if(fiq_fsm_enable) ++ haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32; ++ else ++ haintmsk_new.d32 = 0x0000FFFF; ++ ++ /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ ++ if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); ++ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { ++ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); ++ while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) ++ ; ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); ++ dwc_otg_hcd->fiq_state->mphi_int_count = 0; ++ } ++ int_done++; ++ } ++ haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); ++ /* Re-enable interrupts that the FIQ masked (first time round) */ ++ FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32); ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ ++ if ((jiffies / HZ) > last_time) { ++ //dwc_otg_qh_t *qh; ++ //dwc_list_link_t *cur; ++ /* Once a second output the fiq and irq numbers, useful for debug */ ++ last_time = jiffies / HZ; ++ // DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d", ++ // dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels, ++ // dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done); ++ //printk(KERN_WARNING "Periodic queues:\n"); ++ } ++ } ++ ++ DWC_SPINUNLOCK(dwc_otg_hcd->lock); ++ return retval; ++} ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ ++#warning Compiling code to track missed SOFs ++#define FRAME_NUM_ARRAY_SIZE 1000 ++/** ++ * This function is for debug only. ++ */ ++static inline void track_missed_sofs(uint16_t curr_frame_number) ++{ ++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static int frame_num_idx = 0; ++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; ++ static int dumped_frame_num_array = 0; ++ ++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { ++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != ++ curr_frame_number) { ++ frame_num_array[frame_num_idx] = curr_frame_number; ++ last_frame_num_array[frame_num_idx++] = last_frame_num; ++ } ++ } else if (!dumped_frame_num_array) { ++ int i; ++ DWC_PRINTF("Frame Last Frame\n"); ++ DWC_PRINTF("----- ----------\n"); ++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { ++ DWC_PRINTF("0x%04x 0x%04x\n", ++ frame_num_array[i], last_frame_num_array[i]); ++ } ++ dumped_frame_num_array = 1; ++ } ++ last_frame_num = curr_frame_number; ++} ++#endif ++ ++/** ++ * Handles the start-of-frame interrupt in host mode. Non-periodic ++ * transactions may be queued to the DWC_otg controller for the current ++ * (micro)frame. Periodic transactions may be queued to the controller for the ++ * next (micro)frame. ++ */ ++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) ++{ ++ hfnum_data_t hfnum; ++ gintsts_data_t gintsts = { .d32 = 0 }; ++ dwc_list_link_t *qh_entry; ++ dwc_otg_qh_t *qh; ++ dwc_otg_transaction_type_e tr_type; ++ int did_something = 0; ++ int32_t next_sched_frame = -1; ++ ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); ++#endif ++ hcd->frame_number = hfnum.b.frnum; ++ ++#ifdef DEBUG ++ hcd->frrem_accum += hfnum.b.frrem; ++ hcd->frrem_samples++; ++#endif ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ track_missed_sofs(hcd->frame_number); ++#endif ++ /* Determine whether any periodic QHs should be executed. */ ++ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); ++ while (qh_entry != &hcd->periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); ++ qh_entry = qh_entry->next; ++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { ++ ++ /* ++ * Move QH to the ready list to be executed next ++ * (micro)frame. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ ++ did_something = 1; ++ } ++ else ++ { ++ if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame)) ++ { ++ next_sched_frame = qh->sched_frame; ++ } ++ } ++ } ++ if (fiq_enable) ++ hcd->fiq_state->next_sched_frame = next_sched_frame; ++ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ did_something = 1; ++ } ++ ++ /* Clear interrupt - but do not trample on the FIQ sof */ ++ if (!fiq_fsm_enable) { ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); ++ } ++ return 1; ++} ++ ++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at ++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to ++ * memory if the DWC_otg controller is operating in Slave mode. */ ++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ host_grxsts_data_t grxsts; ++ dwc_hc_t *hc = NULL; ++ ++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); ++ ++ grxsts.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; ++ if (!hc) { ++ DWC_ERROR("Unable to get corresponding channel\n"); ++ return 0; ++ } ++ ++ /* Packet Status */ ++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); ++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); ++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, ++ hc->data_pid_start); ++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer. */ ++ if (grxsts.b.bcnt > 0) { ++ dwc_otg_read_packet(dwc_otg_hcd->core_if, ++ hc->xfer_buff, grxsts.b.bcnt); ++ ++ /* Update the HC fields for the next packet received. */ ++ hc->xfer_count += grxsts.b.bcnt; ++ hc->xfer_buff += grxsts.b.bcnt; ++ } ++ ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: ++ case DWC_GRXSTS_PKTSTS_CH_HALTED: ++ /* Handled in interrupt, just ignore data */ ++ break; ++ default: ++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", ++ grxsts.b.pktsts); ++ break; ++ } ++ ++ return 1; ++} ++ ++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More ++ * data packets may be written to the FIFO for OUT transfers. More requests ++ * may be written to the non-periodic request queue for IN transfers. This ++ * interrupt is enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_NON_PERIODIC); ++ return 1; ++} ++ ++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data ++ * packets may be written to the FIFO for OUT transfers. More requests may be ++ * written to the periodic request queue for IN transfers. This interrupt is ++ * enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_PERIODIC); ++ return 1; ++} ++ ++/** There are multiple conditions that can cause a port interrupt. This function ++ * determines which interrupt conditions have occurred and handles them ++ * appropriately. */ ++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ hprt0_data_t hprt0; ++ hprt0_data_t hprt0_modify; ++ ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ ++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in ++ * GINTSTS */ ++ ++ hprt0_modify.b.prtena = 0; ++ hprt0_modify.b.prtconndet = 0; ++ hprt0_modify.b.prtenchng = 0; ++ hprt0_modify.b.prtovrcurrchng = 0; ++ ++ /* Port Connect Detected ++ * Set flag and clear if detected */ ++ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) { ++ // Dont modify port status if we are in hibernation state ++ hprt0_modify.b.prtconndet = 1; ++ hprt0_modify.b.prtenchng = 1; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ return retval; ++ } ++ ++ if (hprt0.b.prtconndet) { ++ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */ ++ if (dwc_otg_hcd->core_if->adp_enable && ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) { ++ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n"); ++ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer); ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ /* TODO - check if this is required, as ++ * host initialization was already performed ++ * after initial ADP probing ++ */ ++ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ dwc_otg_core_init(dwc_otg_hcd->core_if); ++ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if); ++ cil_hcd_start(dwc_otg_hcd->core_if);*/ ++ } else { ++ ++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " ++ "Port Connect Detected--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 1; ++ hprt0_modify.b.prtconndet = 1; ++ ++ /* B-Device has connected, Delete the connection timer. */ ++ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); ++ } ++ /* The Hub driver asserts a reset when it sees port connect ++ * status change flag */ ++ retval |= 1; ++ } ++ ++ /* Port Enable Changed ++ * Clear if detected - Set internal flag if disabled */ ++ if (hprt0.b.prtenchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Enable Changed--\n", hprt0.d32); ++ hprt0_modify.b.prtenchng = 1; ++ if (hprt0.b.prtena == 1) { ++ hfir_data_t hfir; ++ int do_reset = 0; ++ dwc_otg_core_params_t *params = ++ dwc_otg_hcd->core_if->core_params; ++ dwc_otg_core_global_regs_t *global_regs = ++ dwc_otg_hcd->core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = ++ dwc_otg_hcd->core_if->host_if; ++ ++ /* Every time when port enables calculate ++ * HFIR.FrInterval ++ */ ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if); ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ ++ /* Check if we need to adjust the PHY clock speed for ++ * low power and adjust it */ ++ if (params->host_support_fs_ls_low_power) { ++ gusbcfg_data_t usbcfg; ++ ++ usbcfg.d32 = ++ DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ++ || hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ /* ++ * Low power ++ */ ++ hcfg_data_t hcfg; ++ if (usbcfg.b.phylpwrclksel == 0) { ++ /* Set PHY low power clock select for FS/LS devices */ ++ usbcfg.b.phylpwrclksel = 1; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ ++ hcfg.d32 = ++ DWC_READ_REG32 ++ (&host_if->host_global_regs->hcfg); ++ ++ if (hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_LOW_SPEED ++ && params->host_ls_low_power_phy_clk ++ == ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) ++ { ++ /* 6 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_6_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_6_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } else { ++ /* 48 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 48 MHz ()\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_48_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_48_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } ++ } else { ++ /* ++ * Not low power ++ */ ++ if (usbcfg.b.phylpwrclksel == 1) { ++ usbcfg.b.phylpwrclksel = 0; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ } ++ ++ if (do_reset) { ++ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet); ++ } ++ } ++ ++ if (!do_reset) { ++ /* Port has been enabled set the reset change flag */ ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++ } ++ } else { ++ dwc_otg_hcd->flags.b.port_enable_change = 1; ++ } ++ retval |= 1; ++ } ++ ++ /** Overcurrent Change Interrupt */ ++ if (hprt0.b.prtovrcurrchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Overcurrent Changed--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_over_current_change = 1; ++ hprt0_modify.b.prtovrcurrchng = 1; ++ retval |= 1; ++ } ++ ++ /* Clear Port Interrupts */ ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ ++ return retval; ++} ++ ++/** This interrupt indicates that one or more host channels has a pending ++ * interrupt. There are multiple conditions that can cause each host channel ++ * interrupt. This function determines which conditions have occurred for each ++ * host channel interrupt and handles them appropriately. */ ++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ int retval = 0; ++ haint_data_t haint = { .d32 = 0 } ; ++ ++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in ++ * GINTSTS */ ++ ++ if (!fiq_fsm_enable) ++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); ++ ++ // Overwrite with saved interrupts from fiq handler ++ if(fiq_fsm_enable) ++ { ++ /* check the mask? */ ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint); ++ dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0; ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { ++ if (haint.b2.chint & (1 << i)) { ++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Gets the actual length of a transfer after the transfer halts. _halt_status ++ * holds the reason for the halt. ++ * ++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, ++ * *short_read is set to 1 upon return if less than the requested ++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon ++ * return. short_read may also be NULL on entry, in which case it remains ++ * unchanged. ++ */ ++static uint32_t get_actual_xfer_length(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status, ++ int *short_read) ++{ ++ hctsiz_data_t hctsiz; ++ uint32_t length; ++ ++ if (short_read != NULL) { ++ *short_read = 0; ++ } ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ if (hc->ep_is_in) { ++ length = hc->xfer_len - hctsiz.b.xfersize; ++ if (short_read != NULL) { ++ *short_read = (hctsiz.b.xfersize != 0); ++ } ++ } else if (hc->qh->do_split) { ++ //length = split_out_xfersize[hc->hc_num]; ++ length = qtd->ssplit_out_xfer_count; ++ } else { ++ length = hc->xfer_len; ++ } ++ } else { ++ /* ++ * Must use the hctsiz.pktcnt field to determine how much data ++ * has been transferred. This field reflects the number of ++ * packets that have been transferred via the USB. This is ++ * always an integral number of packets if the transfer was ++ * halted before its normal completion. (Can't use the ++ * hctsiz.xfersize field because that reflects the number of ++ * bytes transferred via the AHB, not the USB). ++ */ ++ length = ++ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; ++ } ++ ++ return length; ++} ++ ++/** ++ * Updates the state of the URB after a Transfer Complete interrupt on the ++ * host channel. Updates the actual_length field of the URB based on the ++ * number of bytes transferred via the host channel. Sets the URB status ++ * if the data transfer is finished. ++ * ++ * @return 1 if the data transfer specified by the URB is completely finished, ++ * 0 otherwise. ++ */ ++static int update_urb_state_xfer_comp(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd) ++{ ++ int xfer_done = 0; ++ int short_read = 0; ++ ++ int xfer_length; ++ ++ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ &short_read); ++ ++ if (urb->actual_length + xfer_length > urb->length) { ++ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", ++ hc->dev_addr, __func__, __LINE__); ++ xfer_length = urb->length - urb->actual_length; ++ } ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && xfer_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ xfer_length); ++ } ++ ++ urb->actual_length += xfer_length; ++ ++ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && ++ (urb->flags & URB_SEND_ZERO_PACKET) ++ && (urb->actual_length == urb->length) ++ && !(urb->length % hc->max_packet)) { ++ xfer_done = 0; ++ } else if (short_read || urb->actual_length >= urb->length) { ++ xfer_done = 1; ++ urb->status = 0; ++ } ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", ++ hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", ++ short_read, xfer_done); ++ } ++#endif ++ ++ return xfer_done; ++} ++ ++/* ++ * Save the starting data toggle for the next transfer. The data toggle is ++ * saved in the QH for non-control transfers and it's saved in the QTD for ++ * control transfers. ++ */ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) ++{ ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { ++ dwc_otg_qh_t *qh = hc->qh; ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } else { ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } ++} ++ ++/** ++ * Updates the state of an Isochronous URB when the transfer is stopped for ++ * any reason. The fields of the current entry in the frame descriptor array ++ * are set based on the transfer state and the input _halt_status. Completes ++ * the Isochronous URB if all the URB frames have been completed. ++ * ++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be ++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. ++ */ ++static dwc_otg_halt_status_e ++update_isoc_urb_state(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ dwc_otg_halt_status_e ret_val = halt_status; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_COMPLETE: ++ frame_desc->status = 0; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ ++ break; ++ case DWC_OTG_HC_XFER_FRAME_OVERRUN: ++ urb->error_count++; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ frame_desc->actual_length = 0; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_OVERFLOW; ++ /* Don't need to update actual_length in this case. */ ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ /* Skip whole frame */ ++ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && ++ hc->ep_is_in && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ break; ++ default: ++ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); ++ break; ++ } ++ if (++qtd->isoc_frame_index == urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers. ++ * The individual frame_desc statuses are used instead. ++ */ ++ hcd->fops->complete(hcd, urb->priv, urb, 0); ++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ ret_val = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ return ret_val; ++} ++ ++/** ++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic ++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are ++ * still linked to the QH, the QH is added to the end of the inactive ++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic ++ * schedule if no more QTDs are linked to the QH. ++ */ ++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) ++{ ++ int continue_split = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ if (qtd->complete_split) { ++ continue_split = 1; ++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || ++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { ++ continue_split = 1; ++ } ++ ++ if (free_qtd) { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ continue_split = 0; ++ } ++ ++ qh->channel = NULL; ++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); ++} ++ ++/** ++ * Releases a host channel for use by other transfers. Attempts to select and ++ * queue more transactions since at least one host channel is available. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc The host channel to release. ++ * @param qtd The QTD associated with the host channel. This QTD may be freed ++ * if the transfer is complete or an error has occurred. ++ * @param halt_status Reason the channel is being released. This status ++ * determines the actions taken by this function. ++ */ ++static void release_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_transaction_type_e tr_type; ++ int free_qtd; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ ++ int hog_port = 0; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", ++ __func__, hc->hc_num, halt_status, hc->xfer_len); ++ ++ if(fiq_fsm_enable && hc->do_split) { ++ if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) { ++ if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID || ++ hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) { ++ hog_port = 0; ++ } ++ } ++ } ++ ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_URB_COMPLETE: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_AHB_ERR: ++ case DWC_OTG_HC_XFER_STALL: ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ if (qtd->error_count >= 3) { ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with transaction error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_PROTOCOL; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_PROTOCOL); ++ } else { ++ free_qtd = 0; ++ } ++ break; ++ case DWC_OTG_HC_XFER_URB_DEQUEUE: ++ /* ++ * The QTD has already been removed and the QH has been ++ * deactivated. Don't want to do anything except release the ++ * host channel and try to queue more transfers. ++ */ ++ goto cleanup; ++ case DWC_OTG_HC_XFER_NO_HALT_STATUS: ++ free_qtd = 0; ++ break; ++ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE: ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with I/O error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_IO; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_IO); ++ break; ++ default: ++ free_qtd = 0; ++ break; ++ } ++ ++ deactivate_qh(hcd, hc->qh, free_qtd); ++ ++cleanup: ++ /* ++ * Release the host channel for use by other transfers. The cleanup ++ * function clears the channel interrupt enables and conditions, so ++ * there's no need to clear the Channel Halted interrupt separately. ++ */ ++ if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH) ++ dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num); ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ if (!microframe_schedule) { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hcd->non_periodic_channels--; ++ break; ++ ++ default: ++ /* ++ * Don't release reservations for periodic channels here. ++ * That's done when a periodic transfer is descheduled (i.e. ++ * when the QH is removed from the periodic schedule). ++ */ ++ break; ++ } ++ } else { ++ ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ hcd->available_host_channels++; ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } ++ ++ /* Try to queue more transfers now that there's a free channel. */ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++/** ++ * Halts a host channel. If the channel cannot be halted immediately because ++ * the request queue is full, this function ensures that the FIFO empty ++ * interrupt for the appropriate queue is enabled so that the halt request can ++ * be queued when there is space in the request queue. ++ * ++ * This function may also be called in DMA mode. In that case, the channel is ++ * simply released since the core always halts the channel automatically in ++ * DMA mode. ++ */ ++static void halt_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ if (hcd->core_if->dma_enable) { ++ release_channel(hcd, hc, qtd, halt_status); ++ return; ++ } ++ ++ /* Slave mode processing... */ ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ ++ if (hc->halt_on_queue) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs; ++ global_regs = hcd->core_if->core_global_regs; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ /* ++ * Make sure the Non-periodic Tx FIFO empty interrupt ++ * is enabled so that the non-periodic schedule will ++ * be processed. ++ */ ++ gintmsk.b.nptxfempty = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } else { ++ /* ++ * Move the QH from the periodic queued schedule to ++ * the periodic assigned schedule. This allows the ++ * halt to be queued when the periodic schedule is ++ * processed. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &hc->qh->qh_list_entry); ++ ++ /* ++ * Make sure the Periodic Tx FIFO Empty interrupt is ++ * enabled so that the periodic schedule will be ++ * processed. ++ */ ++ gintmsk.b.ptxfempty = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++ } ++} ++ ++/** ++ * Performs common cleanup for non-periodic transfers after a Transfer ++ * Complete interrupt. This function should be called after any endpoint type ++ * specific handling is finished to release the host channel. ++ */ ++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hcint_data_t hcint; ++ ++ qtd->error_count = 0; ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. This ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ hc->qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ /* ++ * Always halt and release the host channel to make it available for ++ * more transfers. There may still be more phases for a control ++ * transfer or more data packets for a bulk transfer at this point, ++ * but the host channel is still halted. A channel will be reassigned ++ * to the transfer when the non-periodic schedule is processed after ++ * the channel is released. This allows transactions to be queued ++ * properly via dwc_otg_hcd_queue_transactions, which also enables the ++ * Tx FIFO Empty interrupt if necessary. ++ */ ++ if (hc->ep_is_in) { ++ /* ++ * IN transfers in Slave mode require an explicit disable to ++ * halt the channel. (In DMA mode, this call simply releases ++ * the channel.) ++ */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* ++ * The channel is automatically disabled by the core for OUT ++ * transfers in Slave mode. ++ */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Performs common cleanup for periodic transfers after a Transfer Complete ++ * interrupt. This function should be called after any endpoint type specific ++ * handling is finished to release the host channel. ++ */ ++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hctsiz_data_t hctsiz; ++ qtd->error_count = 0; ++ ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { ++ /* Core halts channel in these cases. */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* Flush any outstanding requests from the Tx queue. */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ uint32_t len; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ ++ len = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, NULL); ++ ++ if (!len) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ return 0; ++ } ++ frame_desc->actual_length += len; ++ ++ if (hc->align_buff && len) ++ dwc_memcpy(qtd->urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset, hc->qh->dw_align_buf, len); ++ qtd->isoc_split_offset += len; ++ ++ if (frame_desc->length == frame_desc->actual_length) { ++ frame_desc->status = 0; ++ qtd->isoc_frame_index++; ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ ++ return 1; /* Indicates that channel released */ ++} ++ ++/** ++ * Handles a host channel Transfer Complete interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int urb_xfer_done; ++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transfer Complete--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ if (pipe_type == UE_ISOCHRONOUS) { ++ /* Do not disable the interrupt, just clear it */ ++ clear_hc_int(hc_regs, xfercomp); ++ return 1; ++ } ++ goto handle_xfercomp_done; ++ } ++ ++ /* ++ * Handle xfer complete on CSPLIT. ++ */ ++ ++ if (hc->qh->do_split) { ++ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in ++ && hcd->core_if->dma_enable) { ++ if (qtd->complete_split ++ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, ++ qtd)) ++ goto handle_xfercomp_done; ++ } else { ++ qtd->complete_split = 0; ++ } ++ } ++ ++ /* Update the QTD and URB states. */ ++ switch (pipe_type) { ++ case UE_CONTROL: ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control setup transaction done\n"); ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ case DWC_OTG_CONTROL_DATA:{ ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, ++ qtd); ++ if (urb_xfer_done) { ++ qtd->control_phase = ++ DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control data transfer done\n"); ++ } else { ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ } ++ case DWC_OTG_CONTROL_STATUS: ++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); ++ if (urb->status == -DWC_E_IN_PROGRESS) { ++ urb->status = 0; ++ } ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ break; ++ } ++ ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_BULK: ++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_INTERRUPT: ++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ ++ /* ++ * Interrupt URB is done on the first transfer complete ++ * interrupt. ++ */ ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_ISOCHRONOUS: ++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); ++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE); ++ } ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ } ++ ++handle_xfercomp_done: ++ disable_hc_int(hc_regs, xfercompl); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel STALL interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "STALL Received--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); ++ goto handle_stall_done; ++ } ++ ++ if (pipe_type == UE_CONTROL) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ } ++ ++ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ /* ++ * USB protocol requires resetting the data toggle for bulk ++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) ++ * setup command is issued to the endpoint. Anticipate the ++ * CLEAR_FEATURE command since a STALL has occurred and reset ++ * the data toggle now. ++ */ ++ hc->qh->data_toggle = 0; ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); ++ ++handle_stall_done: ++ disable_hc_int(hc_regs, stall); ++ ++ return 1; ++} ++ ++/* ++ * Updates the state of the URB when a transfer has been stopped due to an ++ * abnormal condition before the transfer completes. Modifies the ++ * actual_length field of the URB to reflect the number of bytes that have ++ * actually been transferred via the host channel. ++ */ ++static void update_urb_state_xfer_intr(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ ++ if (urb->actual_length + bytes_transferred > urb->length) { ++ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", ++ hc->dev_addr, __func__, __LINE__); ++ bytes_transferred = urb->length - urb->actual_length; ++ } ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ bytes_transferred); ++ } ++ ++ urb->actual_length += bytes_transferred; ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", ++ hc->start_pkt_count); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); ++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", ++ bytes_transferred); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ } ++#endif ++} ++ ++/** ++ * Handles a host channel NAK interrupt. This handler may be called in either ++ * DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NAK Received--\n", hc->hc_num); ++ ++ /* ++ * When we get bulk NAKs then remember this so we holdoff on this qh until ++ * the beginning of the next frame ++ */ ++ switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_BULK: ++ case UE_CONTROL: ++ if (nak_holdoff && qtd->qh->do_split) ++ hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd); ++ } ++ ++ /* ++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and ++ * interrupt. Re-start the SSPLIT transfer. ++ */ ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ qtd->error_count = 0; ++ } ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ goto handle_nak_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (hcd->core_if->dma_enable && hc->ep_is_in) { ++ /* ++ * NAK interrupts are enabled on bulk/control IN ++ * transfers in DMA mode for the sole purpose of ++ * resetting the error count after a transaction error ++ * occurs. The core will continue transferring data. ++ * Disable other interrupts unmasked for the same ++ * reason. ++ */ ++ disable_hc_int(hc_regs, datatglerr); ++ disable_hc_int(hc_regs, ack); ++ qtd->error_count = 0; ++ goto handle_nak_done; ++ } ++ ++ /* ++ * NAK interrupts normally occur during OUT transfers in DMA ++ * or Slave mode. For IN transfers, more requests will be ++ * queued as request queue space is available. ++ */ ++ qtd->error_count = 0; ++ ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NAK); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) ++ hc->qh->ping_state = 1; ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will ++ * start/continue. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_ISOCHRONOUS: ++ /* Should never get called for isochronous transfers. */ ++ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); ++ break; ++ } ++ ++handle_nak_done: ++ disable_hc_int(hc_regs, nak); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel ACK interrupt. This interrupt is enabled when ++ * performing the PING protocol in Slave mode, when errors occur during ++ * either Slave mode or DMA mode, and during Start Split transactions. ++ */ ++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "ACK Received--\n", hc->hc_num); ++ ++ if (hc->do_split) { ++ /* ++ * Handle ACK on SSPLIT. ++ * ACK should not occur in CSPLIT. ++ */ ++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { ++ /* Don't need complete for isochronous out transfers. */ ++ qtd->complete_split = 1; ++ } ++ ++ /* ISOC OUT */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ switch (hc->xact_pos) { ++ case DWC_HCSPLIT_XACTPOS_ALL: ++ break; ++ case DWC_HCSPLIT_XACTPOS_END: ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ break; ++ case DWC_HCSPLIT_XACTPOS_BEGIN: ++ case DWC_HCSPLIT_XACTPOS_MID: ++ /* ++ * For BEGIN or MID, calculate the length for ++ * the next microframe to determine the correct ++ * SSPLIT token, either MID or END. ++ */ ++ { ++ struct dwc_otg_hcd_iso_packet_desc ++ *frame_desc; ++ ++ frame_desc = ++ &qtd->urb-> ++ iso_descs[qtd->isoc_frame_index]; ++ qtd->isoc_split_offset += 188; ++ ++ if ((frame_desc->length - ++ qtd->isoc_split_offset) <= 188) { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_END; ++ } else { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_MID; ++ } ++ ++ } ++ break; ++ } ++ } else { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } else { ++ /* ++ * An unmasked ACK on a non-split DMA transaction is ++ * for the sole purpose of resetting error counts. Disable other ++ * interrupts unmasked for the same reason. ++ */ ++ if(hcd->core_if->dma_enable) { ++ disable_hc_int(hc_regs, datatglerr); ++ disable_hc_int(hc_regs, nak); ++ } ++ qtd->error_count = 0; ++ ++ if (hc->qh->ping_state) { ++ hc->qh->ping_state = 0; ++ /* ++ * Halt the channel so the transfer can be re-started ++ * from the appropriate point. This only happens in ++ * Slave mode. In DMA mode, the ping_state is cleared ++ * when the transfer is started because the core ++ * automatically executes the PING, then the transfer. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } ++ ++ /* ++ * If the ACK occurred when _not_ in the PING state, let the channel ++ * continue transferring data after clearing the error count. ++ */ ++ ++ disable_hc_int(hc_regs, ack); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel NYET interrupt. This interrupt should only occur on ++ * Bulk and Control OUT endpoints and for complete split transactions. If a ++ * NYET occurs at the same time as a Transfer Complete interrupt, it is ++ * handled in the xfercomp interrupt handler, not here. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NYET Received--\n", hc->hc_num); ++ ++ /* ++ * NYET on CSPLIT ++ * re-do the CSPLIT immediately on non-periodic ++ */ ++ if (hc->do_split && hc->complete_split) { ++ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } ++ else ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ goto handle_nyet_done; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ int frnum = dwc_otg_hcd_get_frame_number(hcd); ++ ++ // With the FIQ running we only ever see the failed NYET ++ if (dwc_full_frame_num(frnum) != ++ dwc_full_frame_num(hc->qh->sched_frame) || ++ fiq_fsm_enable) { ++ /* ++ * No longer in the same full speed frame. ++ * Treat this as a transaction error. ++ */ ++#if 0 ++ /** @todo Fix system performance so this can ++ * be treated as an error. Right now complete ++ * splits cannot be scheduled precisely enough ++ * due to other system activity, so this error ++ * occurs regularly in Slave mode. ++ */ ++ qtd->error_count++; ++#endif ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ /** @todo add support for isoc release */ ++ goto handle_nyet_done; ++ } ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ goto handle_nyet_done; ++ } ++ ++ hc->qh->ping_state = 1; ++ qtd->error_count = 0; ++ ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NYET); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ /* ++ * Halt the channel and re-start the transfer so the PING ++ * protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ ++handle_nyet_done: ++ disable_hc_int(hc_regs, nyet); ++ return 1; ++} ++ ++/** ++ * Handles a host channel babble interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Babble Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ goto handle_babble_done; ++ } ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_OVERFLOW); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); ++ } else { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ ++handle_babble_done: ++ disable_hc_int(hc_regs, bblerr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel AHB error interrupt. This handler is only called in ++ * DMA mode. ++ */ ++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ char *pipetype, *speed; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "AHB Error--\n", hc->hc_num); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); ++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); ++ DWC_ERROR(" Device address: %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_ERROR(" Endpoint: %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ pipetype = "CONTROL"; ++ break; ++ case UE_BULK: ++ pipetype = "BULK"; ++ break; ++ case UE_INTERRUPT: ++ pipetype = "INTERRUPT"; ++ break; ++ case UE_ISOCHRONOUS: ++ pipetype = "ISOCHRONOUS"; ++ break; ++ default: ++ pipetype = "UNKNOWN"; ++ break; ++ } ++ ++ DWC_ERROR(" Endpoint type: %s\n", pipetype); ++ ++ switch (hc->speed) { ++ case DWC_OTG_EP_SPEED_HIGH: ++ speed = "HIGH"; ++ break; ++ case DWC_OTG_EP_SPEED_FULL: ++ speed = "FULL"; ++ break; ++ case DWC_OTG_EP_SPEED_LOW: ++ speed = "LOW"; ++ break; ++ default: ++ speed = "UNKNOWN"; ++ break; ++ }; ++ ++ DWC_ERROR(" Speed: %s\n", speed); ++ ++ DWC_ERROR(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb->pipe_info)); ++ DWC_ERROR(" Data buffer length: %d\n", urb->length); ++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->buf, (void *)urb->dma); ++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_ERROR(" Interval: %d\n", urb->interval); ++ ++ /* Core haltes the channel for Descriptor DMA mode */ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_AHB_ERR); ++ goto handle_ahberr_done; ++ } ++ ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); ++ ++ /* ++ * Force a channel halt. Don't call halt_channel because that won't ++ * write to the HCCHARn register in DMA mode to force the halt. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); ++handle_ahberr_done: ++ disable_hc_int(hc_regs, ahberr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel transaction error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transaction Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ goto handle_xacterr_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ qtd->error_count++; ++ if (!hc->qh->ping_state) { ++ ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count++; ++ if (hc->do_split && hc->complete_split) { ++ qtd->complete_split = 0; ++ } ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++handle_xacterr_done: ++ disable_hc_int(hc_regs, xacterr); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel frame overrun interrupt. This handler may be called ++ * in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Frame Overrun--\n", hc->hc_num); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ break; ++ case UE_INTERRUPT: ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, frmovrun); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel data toggle error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Data Toggle Error on %s transfer--\n", ++ hc->hc_num, (hc->ep_is_in ? "IN" : "OUT")); ++ ++ /* Data toggles on split transactions cause the hc to halt. ++ * restart transfer */ ++ if(hc->qh->do_split) ++ { ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } else if (hc->ep_is_in) { ++ /* An unmasked data toggle error on a non-split DMA transaction is ++ * for the sole purpose of resetting error counts. Disable other ++ * interrupts unmasked for the same reason. ++ */ ++ if(hcd->core_if->dma_enable) { ++ disable_hc_int(hc_regs, ack); ++ disable_hc_int(hc_regs, nak); ++ } ++ qtd->error_count = 0; ++ } ++ ++ disable_hc_int(hc_regs, datatglerr); ++ ++ return 1; ++} ++ ++#ifdef DEBUG ++/** ++ * This function is for debug only. It checks that a valid halt status is set ++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is ++ * taken and a warning is issued. ++ * @return 1 if halt status is ok, 0 otherwise. ++ */ ++static inline int halt_status_ok(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcsplt_data_t hcsplt; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { ++ /* ++ * This code is here only as a check. This condition should ++ * never happen. Ignore the halt if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ DWC_WARN ++ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " ++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " ++ "hcint 0x%08x, hcintmsk 0x%08x, " ++ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, ++ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, ++ hcintmsk.d32, hcsplt.d32, qtd->complete_split); ++ ++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", ++ __func__, hc->hc_num); ++ DWC_WARN("\n"); ++ clear_hc_int(hc_regs, chhltd); ++ return 0; ++ } ++ ++ /* ++ * This code is here only as a check. hcchar.chdis should ++ * never be set when the halt interrupt occurs. Halt the ++ * channel again if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: hcchar.chdis set unexpectedly, " ++ "hcchar 0x%08x, trying to halt again\n", ++ __func__, hcchar.d32); ++ clear_hc_int(hc_regs, chhltd); ++ hc->halt_pending = 0; ++ halt_channel(hcd, hc, qtd, hc->halt_status); ++ return 0; ++ } ++ ++ return 1; ++} ++#endif ++ ++/** ++ * Handles a host Channel Halted interrupt in DMA mode. This handler ++ * determines the reason the channel halted and proceeds accordingly. ++ */ ++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int out_nak_enh = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ /* For core with OUT NAK enhancement, the flow for high- ++ * speed CONTROL/BULK OUT is handled a little differently. ++ */ ++ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && ++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { ++ out_nak_enh = 1; ++ } ++ } ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR ++ && !hcd->core_if->dma_desc_enable)) { ++ /* ++ * Just release the channel. A dequeue can happen on a ++ * transfer timeout. In the case of an AHB Error, the channel ++ * was forced to halt because there's no way to gracefully ++ * recover. ++ */ ++ if (hcd->core_if->dma_desc_enable) ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ hc->halt_status); ++ else ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ return; ++ } ++ ++ /* Read the HCINTn register to determine the cause for the halt. */ ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ ++ if (hcint.b.xfercomp) { ++ /** @todo This is here because of a possible hardware bug. Spec ++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT ++ * interrupt w/ACK bit set should occur, but I only see the ++ * XFERCOMP bit, even with it masked out. This is a workaround ++ * for that behavior. Should fix this when hardware is fixed. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { ++ if (out_nak_enh) { ++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { ++ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n"); ++ qtd->error_count = 0; ++ } else { ++ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n"); ++ } ++ } ++ ++ /* ++ * Must handle xacterr before nak or ack. Could get a xacterr ++ * at the same time as either of these on a BULK/CONTROL OUT ++ * that started with a PING. The xacterr takes precedence. ++ */ ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.frmovrun) { ++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.datatglerr) { ++ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); ++ } else if (!out_nak_enh) { ++ if (hcint.b.nyet) { ++ /* ++ * Must handle nyet before nak or ack. Could get a nyet at the ++ * same time as either of those on a BULK/CONTROL OUT that ++ * started with a PING. The nyet takes precedence. ++ */ ++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak && !hcintmsk.b.nak) { ++ /* ++ * If nak is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the nak is handled by ++ * the nak interrupt handler, not here. Handle nak here for ++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow ++ * rewinding the buffer pointer. ++ */ ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ack && !hcintmsk.b.ack) { ++ /* ++ * If ack is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the ack is handled by ++ * the ack interrupt handler, not here. Handle ack here for ++ * split transfers. Start splits halt on ACK. ++ */ ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * A periodic transfer halted with no other channel ++ * interrupts set. Assume it was halted by the core ++ * because it could not be completed in its scheduled ++ * (micro)frame. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", ++ __func__, hc->hc_num); ++#endif ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); ++ } else { ++ DWC_ERROR ++ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " ++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", ++ __func__, hc->hc_num, hcint.d32, ++ DWC_READ_REG32(&hcd-> ++ core_if->core_global_regs-> ++ gintsts)); ++ /* Failthrough: use 3-strikes rule */ ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } ++ ++ } ++ } else { ++ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", ++ hcint.d32); ++ /* Failthrough: use 3-strikes rule */ ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } ++} ++ ++/** ++ * Handles a host channel Channel Halted interrupt. ++ * ++ * In slave mode, this handler is called only when the driver specifically ++ * requests a halt. This occurs during handling other host channel interrupts ++ * (e.g. nak, xacterr, stall, nyet, etc.). ++ * ++ * In DMA mode, this is the interrupt that occurs when the core has finished ++ * processing a transfer on a channel. Other host channel interrupts (except ++ * ahberr) are disabled in DMA mode. ++ */ ++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Channel Halted--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_enable) { ++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); ++ } else { ++#ifdef DEBUG ++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { ++ return 1; ++ } ++#endif ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ } ++ ++ return 1; ++} ++ ++ ++/** ++ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on ++ * FIQ transfer completion ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * 1. Un-mangle the status as recorded in each iso_frame_desc status ++ * 2. Copy it from the dwc_otg_urb into the real URB ++ */ ++void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) ++{ ++ struct dwc_otg_hcd_urb *dwc_urb = qtd->urb; ++ int nr_frames = dwc_urb->packet_count; ++ int i; ++ hcint_data_t frame_hcint; ++ ++ for (i = 0; i < nr_frames; i++) { ++ frame_hcint.d32 = dwc_urb->iso_descs[i].status; ++ if (frame_hcint.b.xfercomp) { ++ dwc_urb->iso_descs[i].status = 0; ++ dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length; ++ } else if (frame_hcint.b.frmovrun) { ++ if (qh->ep_is_in) ++ dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES; ++ else ++ dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else if (frame_hcint.b.xacterr) { ++ dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else if (frame_hcint.b.bblerr) { ++ dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else { ++ /* Something went wrong */ ++ dwc_urb->iso_descs[i].status = -1; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ dwc_urb->error_count++; ++ } ++ } ++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval * (nr_frames - 1)); ++ ++ //printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n", ++ // __FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count); ++} ++ ++/** ++ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state. ++ * Returns total length of data or -1 if the buffers were not used. ++ * ++ */ ++int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) ++{ ++ dwc_hc_t *hc = qh->channel; ++ struct fiq_dma_blob *blob = hcd->fiq_dmab; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ uint8_t *ptr = NULL; ++ int index = 0, len = 0; ++ int i = 0; ++ if (hc->ep_is_in) { ++ /* Copy data out of the DMA bounce buffers to the URB's buffer. ++ * The align_buf is ignored as this is ignored on FSM enqueue. */ ++ ptr = qtd->urb->buf; ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ /* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */ ++ index = qtd->isoc_frame_index; ++ ptr += qtd->urb->iso_descs[index].offset; ++ } else { ++ /* Need to increment by actual_length for interrupt IN */ ++ ptr += qtd->urb->actual_length; ++ } ++ ++ for (i = 0; i < st->dma_info.index; i++) { ++ len += st->dma_info.slot_len[i]; ++ dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]); ++ ptr += st->dma_info.slot_len[i]; ++ } ++ return len; ++ } else { ++ /* OUT endpoints - nothing to do. */ ++ return -1; ++ } ++ ++} ++/** ++ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt ++ * from a channel handled in the FIQ ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * If a host channel interrupt was received by the IRQ and this was a channel ++ * used by the FIQ, the execution flow for transfer completion is substantially ++ * different from the normal (messy) path. This function and its friends handles ++ * channel cleanup and transaction completion from a FIQ transaction. ++ */ ++void dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num) ++{ ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ dwc_hc_t *hc = hcd->hc_ptr_array[num]; ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ dwc_otg_qh_t *qh = hc->qh; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num]; ++ hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy; ++ int hostchannels = 0; ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm); ++ ++ hostchannels = hcd->available_host_channels; ++ switch (st->fsm) { ++ case FIQ_TEST: ++ break; ++ ++ case FIQ_DEQUEUE_ISSUED: ++ /* hc_halt was called. QTD no longer exists. */ ++ /* TODO: for a nonperiodic split transaction, need to issue a ++ * CLEAR_TT_BUFFER hub command if we were in the start-split phase. ++ */ ++ release_channel(hcd, hc, NULL, hc->halt_status); ++ break; ++ ++ case FIQ_NP_SPLIT_DONE: ++ /* Nonperiodic transaction complete. */ ++ if (!hc->ep_is_in) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (hcint.b.xfercomp) { ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak) { ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } ++ break; ++ ++ case FIQ_NP_SPLIT_HS_ABORTED: ++ /* A HS abort is a 3-strikes on the HS bus at any point in the transaction. ++ * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that ++ * because there's no guarantee which order a non-periodic split happened in. ++ * We could end up clearing a perfectly good transaction out of the buffer. ++ */ ++ if (hcint.b.xacterr) { ++ qtd->error_count += st->nr_errors; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ local_fiq_disable(); ++ BUG(); ++ } ++ break; ++ ++ case FIQ_NP_SPLIT_LS_ABORTED: ++ /* A few cases can cause this - either an unknown state on a SSPLIT or ++ * STALL/data toggle error response on a CSPLIT */ ++ if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.datatglerr) { ++ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ local_fiq_disable(); ++ BUG(); ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_DONE: ++ /* Isoc IN or Interrupt IN/OUT */ ++ ++ /* Flow control here is different from the normal execution by the driver. ++ * We need to completely ignore most of the driver's method of handling ++ * split transactions and do it ourselves. ++ */ ++ if (hc->ep_type == UE_INTERRUPT) { ++ if (hcint.b.nak) { ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hc->ep_is_in) { ++ int len; ++ len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num); ++ //printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length); ++ qtd->urb->actual_length += len; ++ if (qtd->urb->actual_length >= qtd->urb->length) { ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ /* Interrupt transfer not complete yet - is it a short read? */ ++ if (len < hc->max_packet) { ++ /* Interrupt transaction complete */ ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ /* Further transactions required */ ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ } else { ++ /* Interrupt OUT complete. */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ qtd->urb->actual_length += hc->xfer_len; ++ if (qtd->urb->actual_length >= qtd->urb->length) { ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ } else { ++ /* ISOC IN complete. */ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ int len = 0; ++ /* Record errors, update qtd. */ ++ if (st->nr_errors) { ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ frame_desc->status = 0; ++ /* Unswizzle dma */ ++ len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num); ++ frame_desc->actual_length = len; ++ } ++ qtd->isoc_frame_index++; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_DONE: { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ if (st->nr_errors) { ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ frame_desc->status = 0; ++ frame_desc->actual_length = frame_desc->length; ++ } ++ qtd->isoc_frame_index++; ++ qtd->isoc_split_offset = 0; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_NYET_ABORTED: ++ /* Doh. lost the data. */ ++ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " ++ "- FIQ reported NYET. Data may have been lost.\n", ++ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); ++ if (hc->ep_type == UE_ISOCHRONOUS) { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ qtd->isoc_frame_index++; ++ qtd->isoc_split_offset = 0; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ case FIQ_HS_ISOC_DONE: ++ /* The FIQ has performed a whole pile of isochronous transactions. ++ * The status is recorded as the interrupt state should the transaction ++ * fail. ++ */ ++ dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num); ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ break; ++ ++ case FIQ_PER_SPLIT_LS_ABORTED: ++ if (hcint.b.xacterr) { ++ /* Hub has responded with an ERR packet. Device ++ * has been unplugged or the port has been disabled. ++ * TODO: need to issue a reset to the hub port. */ ++ qtd->error_count += 3; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed " ++ "- FIQ reported FSM=%d. Data may have been lost.\n", ++ st->fsm, hc->dev_addr, hc->ep_num); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_HS_ABORTED: ++ /* Either the SSPLIT phase suffered transaction errors or something ++ * unexpected happened. ++ */ ++ qtd->error_count += 3; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ /* Couldn't complete in the nominated frame */ ++ printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " ++ "- FIQ timed out. Data may have been lost.\n", ++ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); ++ if (hc->ep_type == UE_ISOCHRONOUS) { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ frame_desc->actual_length = 0; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ qtd->isoc_frame_index++; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ default: ++ DWC_WARN("Unexpected state received on hc=%d fsm=%d on transfer to device %d ep 0x%x", ++ hc->hc_num, st->fsm, hc->dev_addr, hc->ep_num); ++ qtd->error_count++; ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ return; ++} ++ ++/** Handles interrupt for a specific Host Channel */ ++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) ++{ ++ int retval = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ dwc_hc_t *hc; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[num]; ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; ++ if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ /* We are responding to a channel disable. Driver ++ * state is cleared - our qtd has gone away. ++ */ ++ release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status); ++ return 1; ++ } ++ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ ++ /* ++ * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ. ++ * Execution path is fundamentally different for the channels after a FIQ has completed ++ * a split transaction. ++ */ ++ if (fiq_fsm_enable) { ++ switch (dwc_otg_hcd->fiq_state->channel[num].fsm) { ++ case FIQ_PASSTHROUGH: ++ break; ++ case FIQ_PASSTHROUGH_ERRORSTATE: ++ /* Hook into the error count */ ++ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num); ++ if (!dwc_otg_hcd->fiq_state->channel[num].nr_errors) { ++ qtd->error_count = 0; ++ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET "); ++ } ++ break; ++ default: ++ dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num); ++ return 1; ++ } ++ } ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ hcint.d32 = hcint.d32 & hcintmsk.d32; ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ if (hcint.b.chhltd && hcint.d32 != 0x2) { ++ hcint.b.chhltd = 0; ++ } ++ } ++ ++ if (hcint.b.xfercomp) { ++ retval |= ++ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ /* ++ * If NYET occurred at same time as Xfer Complete, the NYET is ++ * handled by the Xfer Complete interrupt handler. Don't want ++ * to call the NYET interrupt handler in this case. ++ */ ++ hcint.b.nyet = 0; ++ } ++ if (hcint.b.chhltd) { ++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ahberr) { ++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.stall) { ++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nak) { ++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ack) { ++ if(!hcint.b.chhltd) ++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nyet) { ++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.xacterr) { ++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.bblerr) { ++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.frmovrun) { ++ retval |= ++ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.datatglerr) { ++ retval |= ++ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ ++ return retval; ++} ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +new file mode 100644 +index 000000000000..74cd5fa54aed +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -0,0 +1,1005 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ ++ * $Revision: #20 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1872981 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the implementation of the HCD. In Linux, the HCD ++ * implements the hc_driver API. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ++#include <../drivers/usb/core/hcd.h> ++#else ++#include ++#endif ++#include ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#define USB_URB_EP_LINKING 1 ++#else ++#define USB_URB_EP_LINKING 0 ++#endif ++ ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++ ++extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; ++ ++/** ++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is ++ * qualified with its direction (possible 32 endpoints per device). ++ */ ++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ++ ++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; ++ ++extern bool fiq_enable; ++ ++/** @name Linux HC Driver API Functions */ ++/** @{ */ ++/* manage i/o requests, device state */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags); ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); ++#endif ++#else /* kernels at or post 2.6.30 */ ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, ++ struct urb *urb, int status); ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */ ++ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#endif ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); ++extern int hcd_start(struct usb_hcd *hcd); ++extern void hcd_stop(struct usb_hcd *hcd); ++static int get_frame_number(struct usb_hcd *hcd); ++extern int hub_status_data(struct usb_hcd *hcd, char *buf); ++extern int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, u16 wIndex, char *buf, u16 wLength); ++ ++struct wrapper_priv_data { ++ dwc_otg_hcd_t *dwc_otg_hcd; ++}; ++ ++/** @} */ ++ ++static struct hc_driver dwc_otg_hc_driver = { ++ ++ .description = dwc_otg_hcd_name, ++ .product_desc = "DWC OTG Controller", ++ .hcd_priv_size = sizeof(struct wrapper_priv_data), ++ ++ .irq = dwc_otg_hcd_irq, ++ ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ //.reset = ++ .start = hcd_start, ++ //.suspend = ++ //.resume = ++ .stop = hcd_stop, ++ ++ .urb_enqueue = dwc_otg_urb_enqueue, ++ .urb_dequeue = dwc_otg_urb_dequeue, ++ .endpoint_disable = endpoint_disable, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++ .endpoint_reset = endpoint_reset, ++#endif ++ .get_frame_number = get_frame_number, ++ ++ .hub_status_data = hub_status_data, ++ .hub_control = hub_control, ++ //.bus_suspend = ++ //.bus_resume = ++}; ++ ++/** Gets the dwc_otg_hcd from a struct usb_hcd */ ++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) ++{ ++ struct wrapper_priv_data *p; ++ p = (struct wrapper_priv_data *)(hcd->hcd_priv); ++ return p->dwc_otg_hcd; ++} ++ ++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ ++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); ++} ++ ++/** Gets the usb_host_endpoint associated with an URB. */ ++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) ++{ ++ struct usb_device *dev = urb->dev; ++ int ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (usb_pipein(urb->pipe)) ++ return dev->ep_in[ep_num]; ++ else ++ return dev->ep_out[ep_num]; ++} ++ ++static int _disconnect(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = 0; ++ return 0; ++} ++ ++static int _start(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); ++ hcd_start(usb_hcd); ++ ++ return 0; ++} ++ ++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, ++ uint32_t * port_addr) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ struct usb_bus *bus; ++#if 1 //GRAYG - temporary ++ if (NULL == urb_handle) ++ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG ++ if (NULL == urb->dev) ++ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG ++ if (NULL == port_addr) ++ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG ++#endif ++ if (urb->dev->tt) { ++ if (NULL == urb->dev->tt->hub) { ++ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", ++ __func__); //GRAYG ++ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG ++ *hub_addr = 0; //GRAYG ++ // we probably shouldn't have a transaction translator if ++ // there's no associated hub? ++ } else { ++ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); ++ if (urb->dev->tt->hub == bus->root_hub) ++ *hub_addr = 0; ++ else ++ *hub_addr = urb->dev->tt->hub->devnum; ++ } ++ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; ++ } else { ++ *hub_addr = 0; ++ *port_addr = urb->dev->ttport; ++ } ++ return 0; ++} ++ ++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ return urb->dev->speed; ++} ++ ++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ return usb_hcd->self.b_hnp_enable; ++} ++ ++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs++; ++ } ++} ++ ++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs--; ++ } ++} ++ ++/** ++ * Sets the final status of an URB and returns it to the device driver. Any ++ * required cleanup of the URB is performed. The HCD lock should be held on ++ * entry. ++ */ ++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ urb_tq_entry_t *new_entry; ++ int rc = 0; ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", ++ __func__, urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT", status); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d status: %d\n", ++ i, urb->iso_frame_desc[i].status); ++ } ++ } ++ } ++ new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t)); ++ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); ++ /* Convert status value. */ ++ switch (status) { ++ case -DWC_E_PROTOCOL: ++ status = -EPROTO; ++ break; ++ case -DWC_E_IN_PROGRESS: ++ status = -EINPROGRESS; ++ break; ++ case -DWC_E_PIPE: ++ status = -EPIPE; ++ break; ++ case -DWC_E_IO: ++ status = -EIO; ++ break; ++ case -DWC_E_TIMEOUT: ++ status = -ETIMEDOUT; ++ break; ++ case -DWC_E_OVERFLOW: ++ status = -EOVERFLOW; ++ break; ++ case -DWC_E_SHUTDOWN: ++ status = -ESHUTDOWN; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("Uknown urb status %d\n", status); ++ ++ } ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ ++ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ urb->iso_frame_desc[i].actual_length = ++ dwc_otg_hcd_urb_get_iso_desc_actual_length ++ (dwc_otg_urb, i); ++ urb->iso_frame_desc[i].status = ++ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); ++ } ++ } ++ ++ urb->status = status; ++ urb->hcpriv = NULL; ++ if (!status) { ++ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && ++ (urb->actual_length < urb->transfer_buffer_length)) { ++ urb->status = -EREMOTEIO; ++ } ++ } ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++ if (ep) { ++ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), ++ dwc_otg_hcd_get_ep_bandwidth(hcd, ++ ep->hcpriv), ++ urb); ++ } ++ } ++ DWC_FREE(dwc_otg_urb); ++ if (!new_entry) { ++ DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n"); ++ urb->status = -EPROTO; ++ /* don't schedule the tasklet - ++ * directly return the packet here with error. */ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++#endif ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); ++#else ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); ++#endif ++ } else { ++ new_entry->urb = urb; ++#if USB_URB_EP_LINKING ++ rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); ++ if(0 == rc) { ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++ } ++#endif ++ if(0 == rc) { ++ DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry, ++ urb_tq_entries); ++ DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet); ++ } ++ } ++ return 0; ++} ++ ++static struct dwc_otg_hcd_function_ops hcd_fops = { ++ .start = _start, ++ .disconnect = _disconnect, ++ .hub_info = _hub_info, ++ .speed = _speed, ++ .complete = _complete, ++ .get_b_hnp_enable = _get_b_hnp_enable, ++}; ++ ++static struct fiq_handler fh = { ++ .name = "usb_fiq", ++}; ++ ++static void hcd_init_fiq(void *cookie) ++{ ++ dwc_otg_device_t *otg_dev = cookie; ++ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; ++ struct pt_regs regs; ++ int irq; ++ ++ if (claim_fiq(&fh)) { ++ DWC_ERROR("Can't claim FIQ"); ++ BUG(); ++ } ++ DWC_WARN("FIQ on core %d at 0x%08x", ++ smp_processor_id(), ++ (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); ++ DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); ++ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); ++ memset(®s,0,sizeof(regs)); ++ ++ regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; ++ if (fiq_fsm_enable) { ++ regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels; ++ //regs.ARM_r10 = dwc_otg_hcd->dma; ++ regs.ARM_fp = (long) dwc_otg_fiq_fsm; ++ } else { ++ regs.ARM_fp = (long) dwc_otg_fiq_nop; ++ } ++ ++ regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4); ++ ++// __show_regs(®s); ++ set_fiq_regs(®s); ++ ++ //Set the mphi periph to the required registers ++ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; ++ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; ++ dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; ++ dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; ++ dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; ++ dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; ++ DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); ++ //Enable mphi peripheral ++ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); ++#ifdef DEBUG ++ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) ++ DWC_WARN("MPHI periph has been enabled"); ++ else ++ DWC_WARN("MPHI periph has NOT been enabled"); ++#endif ++ // Enable FIQ interrupt from USB peripheral ++#ifdef CONFIG_MULTI_IRQ_HANDLER ++ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++#else ++ irq = INTERRUPT_VC_USB; ++#endif ++ if (irq < 0) { ++ DWC_ERROR("Can't get FIQ irq"); ++ return; ++ } ++ enable_fiq(irq); ++ local_fiq_enable(); ++} ++ ++/** ++ * Initializes the HCD. This function allocates memory for and initializes the ++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the ++ * USB bus with the core and calls the hc_driver->start() function. It returns ++ * a negative error on failure. ++ */ ++int hcd_init(dwc_bus_dev_t *_dev) ++{ ++ struct usb_hcd *hcd = NULL; ++ dwc_otg_hcd_t *dwc_otg_hcd = NULL; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ u64 dmamask; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); ++ ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (dwc_otg_is_dma_enable(otg_dev->core_if)) ++ dmamask = DMA_BIT_MASK(32); ++ else ++ dmamask = 0; ++ ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dma_set_mask(&_dev->dev, dmamask); ++ dma_set_coherent_mask(&_dev->dev, dmamask); ++#elif defined(PCI_INTERFACE) ++ pci_set_dma_mask(_dev, dmamask); ++ pci_set_consistent_dma_mask(_dev, dmamask); ++#endif ++ ++ /* ++ * Allocate memory for the base HCD plus the DWC OTG HCD. ++ * Initialize the base HCD. ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id); ++#else ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev)); ++ hcd->has_tt = 1; ++// hcd->uses_new_polling = 1; ++// hcd->poll_rh = 0; ++#endif ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto error1; ++ } ++ ++ hcd->regs = otg_dev->os_dep.base; ++ ++ ++ /* Initialize the DWC OTG HCD. */ ++ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); ++ if (!dwc_otg_hcd) { ++ goto error2; ++ } ++ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = ++ dwc_otg_hcd; ++ otg_dev->hcd = dwc_otg_hcd; ++ otg_dev->hcd->otg_dev = otg_dev; ++ ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { ++ goto error2; ++ } ++ ++ if (fiq_enable) { ++ if (num_online_cpus() > 1) { ++ /* bcm2709: can run the FIQ on a separate core to IRQs */ ++ smp_call_function_single(1, hcd_init_fiq, otg_dev, 1); ++ } else { ++ smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); ++ } ++ } ++ ++ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later ++ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if); ++#endif ++ /* Don't support SG list at this point */ ++ hcd->self.sg_tablesize = 0; ++#endif ++ /* ++ * Finish generic HCD initialization and start the HCD. This function ++ * allocates the DMA buffer pool, registers the USB bus, requests the ++ * IRQ line, and calls hcd_start method. ++ */ ++#ifdef PLATFORM_INTERFACE ++ retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); ++#else ++ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); ++#endif ++ if (retval < 0) { ++ goto error2; ++ } ++ ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); ++ return 0; ++ ++error2: ++ usb_put_hcd(hcd); ++error1: ++ return retval; ++} ++ ++/** ++ * Removes the HCD. ++ * Frees memory and resources associated with the HCD and deregisters the bus. ++ */ ++void hcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ struct usb_hcd *hcd; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); ++ ++ if (!otg_dev) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return; ++ } ++ ++ dwc_otg_hcd = otg_dev->hcd; ++ ++ if (!dwc_otg_hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return; ++ } ++ ++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); ++ ++ if (!hcd) { ++ DWC_DEBUGPL(DBG_ANY, ++ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", ++ __func__); ++ return; ++ } ++ usb_remove_hcd(hcd); ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); ++ dwc_otg_hcd_remove(dwc_otg_hcd); ++ usb_put_hcd(hcd); ++} ++ ++/* ========================================================================= ++ * Linux HC Driver Functions ++ * ========================================================================= */ ++ ++/** Initializes the DWC_otg controller and its root hub and prepares it for host ++ * mode operation. Activates the root port. Returns 0 on success and a negative ++ * error code on failure. */ ++int hcd_start(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct usb_bus *bus; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); ++ bus = hcd_to_bus(hcd); ++ ++ hcd->state = HC_STATE_RUNNING; ++ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { ++ return 0; ++ } ++ ++ /* Initialize and connect root hub if one is not already attached */ ++ if (bus->root_hub) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); ++ /* Inform the HUB driver to resume. */ ++ usb_hcd_resume_root_hub(hcd); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void hcd_stop(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++} ++ ++/** Returns the current frame number. */ ++static int get_frame_number(struct usb_hcd *hcd) ++{ ++ hprt0_data_t hprt0; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3; ++ else ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); ++} ++ ++#ifdef DEBUG ++static void dump_urb_info(struct urb *urb, char *fn_name) ++{ ++ DWC_PRINTF("%s, urb %p\n", fn_name, urb); ++ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_PRINTF(" Endpoint type: %s\n", ( { ++ char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++case PIPE_CONTROL: ++pipetype = "CONTROL"; break; case PIPE_BULK: ++pipetype = "BULK"; break; case PIPE_INTERRUPT: ++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: ++pipetype = "ISOCHRONOUS"; break; default: ++ pipetype = "UNKNOWN"; break;}; ++ pipetype;} ++ )) ; ++ DWC_PRINTF(" Speed: %s\n", ( { ++ char *speed; switch (urb->dev->speed) { ++case USB_SPEED_HIGH: ++speed = "HIGH"; break; case USB_SPEED_FULL: ++speed = "FULL"; break; case USB_SPEED_LOW: ++speed = "LOW"; break; default: ++ speed = "UNKNOWN"; break;}; ++ speed;} ++ )) ; ++ DWC_PRINTF(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_PRINTF(" Interval: %d\n", urb->interval); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d:\n", i); ++ DWC_PRINTF(" offset: %d, length %d\n", ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length); ++ } ++ } ++} ++#endif ++ ++/** Starts processing a USB transfer request specified by a USB Request Block ++ * (URB). mem_flags indicates the type of memory allocation to use while ++ * processing this URB. */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags) ++{ ++ int retval = 0; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep = urb->ep; ++#endif ++ dwc_irqflags_t irqflags; ++ void **ref_ep_hcpriv = &ep->hcpriv; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ int i; ++ int alloc_bandwidth = 0; ++ uint8_t ep_type = 0; ++ uint32_t flags = 0; ++ void *buf; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_enqueue"); ++ } ++#endif ++ ++ if (!urb->transfer_buffer && urb->transfer_buffer_length) ++ return -EINVAL; ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ++ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ if (!dwc_otg_hcd_is_bandwidth_allocated ++ (dwc_otg_hcd, ref_ep_hcpriv)) { ++ alloc_bandwidth = 1; ++ } ++ } ++ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ ep_type = USB_ENDPOINT_XFER_CONTROL; ++ break; ++ case PIPE_ISOCHRONOUS: ++ ep_type = USB_ENDPOINT_XFER_ISOC; ++ break; ++ case PIPE_BULK: ++ ep_type = USB_ENDPOINT_XFER_BULK; ++ break; ++ case PIPE_INTERRUPT: ++ ep_type = USB_ENDPOINT_XFER_INT; ++ break; ++ default: ++ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe)); ++ } ++ ++ /* # of packets is often 0 - do we really need to call this then? */ ++ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, ++ urb->number_of_packets, ++ mem_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if(dwc_otg_urb == NULL) ++ return -ENOMEM; ++ ++ if (!dwc_otg_urb && urb->number_of_packets) ++ return -ENOMEM; ++ ++ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ep_type, ++ usb_pipein(urb->pipe), ++ usb_maxpacket(urb->dev, urb->pipe, ++ !(usb_pipein(urb->pipe)))); ++ ++ buf = urb->transfer_buffer; ++ if (hcd->self.uses_dma && !buf && urb->transfer_buffer_length) { ++ /* ++ * Calculate virtual address from physical address, ++ * because some class driver may not fill transfer_buffer. ++ * In Buffer DMA mode virual address is used, ++ * when handling non DWORD aligned buffers. ++ */ ++ buf = (void *)__bus_to_virt((unsigned long)urb->transfer_dma); ++ dev_warn_once(&urb->dev->dev, ++ "USB transfer_buffer was NULL, will use __bus_to_virt(%pad)=%p\n", ++ &urb->transfer_dma, buf); ++ } ++ ++ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) ++ flags |= URB_GIVEBACK_ASAP; ++ if (urb->transfer_flags & URB_ZERO_PACKET) ++ flags |= URB_SEND_ZERO_PACKET; ++ ++ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, ++ urb->transfer_dma, ++ urb->transfer_buffer_length, ++ urb->setup_packet, ++ urb->setup_dma, flags, urb->interval); ++ ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, ++ urb-> ++ iso_frame_desc[i].offset, ++ urb-> ++ iso_frame_desc[i].length); ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); ++ urb->hcpriv = dwc_otg_urb; ++#if USB_URB_EP_LINKING ++ retval = usb_hcd_link_urb_to_ep(hcd, urb); ++ if (0 == retval) ++#endif ++ { ++ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, ++ /*(dwc_otg_qh_t **)*/ ++ ref_ep_hcpriv, 1); ++ if (0 == retval) { ++ if (alloc_bandwidth) { ++ allocate_bus_bandwidth(hcd, ++ dwc_otg_hcd_get_ep_bandwidth( ++ dwc_otg_hcd, *ref_ep_hcpriv), ++ urb); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval); ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ DWC_FREE(dwc_otg_urb); ++ urb->hcpriv = NULL; ++ if (retval == -DWC_E_NO_DEVICE) ++ retval = -ENODEV; ++ } ++ } ++#if USB_URB_EP_LINKING ++ else ++ { ++ DWC_FREE(dwc_otg_urb); ++ urb->hcpriv = NULL; ++ } ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); ++ return retval; ++} ++ ++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate ++ * success. */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) ++#else ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ++#endif ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ int rc; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); ++ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_dequeue"); ++ } ++#endif ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ rc = usb_hcd_check_unlink_urb(hcd, urb, status); ++ if (0 == rc) { ++ if(urb->hcpriv != NULL) { ++ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, ++ (dwc_otg_hcd_urb_t *)urb->hcpriv); ++ ++ DWC_FREE(urb->hcpriv); ++ urb->hcpriv = NULL; ++ } ++ } ++ ++ if (0 == rc) { ++ /* Higher layer software sets URB status. */ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(hcd, urb); ++#else ++ usb_hcd_giveback_urb(hcd, urb, status); ++#endif ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("Called usb_hcd_giveback_urb() \n"); ++ DWC_PRINTF(" 1urb->status = %d\n", urb->status); ++ } ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n"); ++ } else { ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n", ++ rc); ++ } ++ ++ return rc; ++} ++ ++/* Frees resources in the DWC_otg controller related to a given endpoint. Also ++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint ++ * must already be dequeued. */ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " ++ "endpoint=%d\n", ep->desc.bEndpointAddress, ++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); ++ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); ++ ep->hcpriv = NULL; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++/* Resets endpoint specific parameter values, in current version used to reset ++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */ ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_irqflags_t flags; ++ struct usb_device *udev = NULL; ++ int epnum = usb_endpoint_num(&ep->desc); ++ int is_out = usb_endpoint_dir_out(&ep->desc); ++ int is_control = usb_endpoint_xfer_control(&ep->desc); ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep); ++ ++ if (dev) ++ udev = to_usb_device(dev); ++ else ++ return; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum); ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ usb_settoggle(udev, epnum, is_out, 0); ++ if (is_control) ++ usb_settoggle(udev, epnum, !is_out, 0); ++ ++ if (ep->hcpriv) { ++ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++} ++#endif ++ ++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if ++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid ++ * interrupt. ++ * ++ * This function is called by the USB core when an interrupt occurs */ ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** Creates Status Change bitmap for the root hub and root port. The bitmap is ++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 ++ * is the status change indicator for the single root port. Returns 1 if either ++ * change indicator is 1, otherwise returns 0. */ ++int hub_status_data(struct usb_hcd *hcd, char *buf) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ buf[0] = 0; ++ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; ++ ++ return (buf[0] != 0); ++} ++ ++/** Handles hub class-specific requests. */ ++int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) ++{ ++ int retval; ++ ++ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), ++ typeReq, wValue, wIndex, buf, wLength); ++ ++ switch (retval) { ++ case -DWC_E_INVALID: ++ retval = -EINVAL; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +new file mode 100644 +index 000000000000..c2dff94e8e6e +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +@@ -0,0 +1,963 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ ++ * $Revision: #44 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the functions to manage Queue Heads and Queue ++ * Transfer Descriptors. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++/** ++ * Free each QTD in the QH's QTD-list then free the QH. QH should already be ++ * removed from a list. QTD list should already be empty if called from URB ++ * Dequeue. ++ * ++ * @param hcd HCD instance. ++ * @param qh The QH to free. ++ */ ++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_irqflags_t flags; ++ uint32_t buf_size = 0; ++ uint8_t *align_buf_virt = NULL; ++ dwc_dma_t align_buf_dma; ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ /* Free each QTD in the QTD list */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++ dwc_otg_hcd_qtd_free(qtd); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_qh_free_ddma(hcd, qh); ++ } else if (qh->dw_align_buf) { ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ buf_size = 4096; ++ } else { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } ++ align_buf_virt = qh->dw_align_buf; ++ align_buf_dma = qh->dw_align_buf_dma; ++ } ++ ++ DWC_FREE(qh); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ if (align_buf_virt) ++ DWC_DMA_FREE(dev, buf_size, align_buf_virt, align_buf_dma); ++ return; ++} ++ ++#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) ++#define HS_HOST_DELAY 5 /* nanoseconds */ ++#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ ++#define HUB_LS_SETUP 333 /* nanoseconds */ ++#define NS_TO_US(ns) ((ns + 500) / 1000) ++ /* convert & round nanoseconds to microseconds */ ++ ++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount) ++{ ++ unsigned long retval; ++ ++ switch (speed) { ++ case USB_SPEED_HIGH: ++ if (is_isoc) { ++ retval = ++ ((38 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } else { ++ retval = ++ ((55 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } ++ break; ++ case USB_SPEED_FULL: ++ if (is_isoc) { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ if (is_in) { ++ retval = 7268 + FS_LS_HOST_DELAY + retval; ++ } else { ++ retval = 6265 + FS_LS_HOST_DELAY + retval; ++ } ++ } else { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ retval = 9107 + FS_LS_HOST_DELAY + retval; ++ } ++ break; ++ case USB_SPEED_LOW: ++ if (is_in) { ++ retval = ++ (67667 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } else { ++ retval = ++ (66700 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown device speed\n"); ++ retval = -1; ++ } ++ ++ return NS_TO_US(retval); ++} ++ ++/** ++ * Initializes a QH structure. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ */ ++#define SCHEDULE_SLOP 10 ++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb) ++{ ++ char *speed, *type; ++ int dev_speed; ++ uint32_t hub_addr, hub_port; ++ ++ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); ++ ++ /* Initialize QH */ ++ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); ++ DWC_CIRCLEQ_INIT(&qh->qtd_list); ++ DWC_LIST_INIT(&qh->qh_list_entry); ++ qh->channel = NULL; ++ ++ /* FS/LS Enpoint on HS Hub ++ * NOT virtual root hub */ ++ dev_speed = hcd->fops->speed(hcd, urb->priv); ++ ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); ++ qh->do_split = 0; ++ if (microframe_schedule) ++ qh->speed = dev_speed; ++ ++ qh->nak_frame = 0xffff; ++ ++ if (((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL)) && ++ (hub_addr != 0 && hub_addr != 1)) { ++ DWC_DEBUGPL(DBG_HCD, ++ "QH init: EP %d: TT found at hub addr %d, for port %d\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, ++ hub_port); ++ qh->do_split = 1; ++ qh->skip_count = 0; ++ } ++ ++ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { ++ /* Compute scheduling parameters once and save them. */ ++ hprt0_data_t hprt; ++ ++ /** @todo Account for split transfers in the bus time. */ ++ int bytecount = ++ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); ++ ++ qh->usecs = ++ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), ++ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS), ++ bytecount); ++ /* Start in a slightly future (micro)frame. */ ++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, ++ SCHEDULE_SLOP); ++ qh->interval = urb->interval; ++ ++#if 0 ++ /* Increase interrupt polling rate for debugging. */ ++ if (qh->ep_type == UE_INTERRUPT) { ++ qh->interval = 8; ++ } ++#endif ++ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); ++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && ++ ((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL))) { ++ qh->interval *= 8; ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ ++ } ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); ++ switch (dev_speed) { ++ case USB_SPEED_LOW: ++ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; ++ speed = "low"; ++ break; ++ case USB_SPEED_FULL: ++ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; ++ speed = "full"; ++ break; ++ case USB_SPEED_HIGH: ++ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; ++ speed = "high"; ++ break; ++ default: ++ speed = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); ++ ++ switch (qh->ep_type) { ++ case UE_ISOCHRONOUS: ++ type = "isochronous"; ++ break; ++ case UE_INTERRUPT: ++ type = "interrupt"; ++ break; ++ case UE_CONTROL: ++ type = "control"; ++ break; ++ case UE_BULK: ++ type = "bulk"; ++ break; ++ default: ++ type = "?"; ++ break; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); ++ ++#ifdef DEBUG ++ if (qh->ep_type == UE_INTERRUPT) { ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", ++ qh->usecs); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", ++ qh->interval); ++ } ++#endif ++ ++} ++ ++/** ++ * This function allocates and initializes a QH. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * @return Returns pointer to the newly allocated QH, or NULL on error. */ ++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qh_t *qh; ++ ++ /* Allocate memory */ ++ /** @todo add memflags argument */ ++ qh = dwc_otg_hcd_qh_alloc(atomic_alloc); ++ if (qh == NULL) { ++ DWC_ERROR("qh allocation failed"); ++ return NULL; ++ } ++ ++ qh_init(hcd, qh, urb); ++ ++ if (hcd->core_if->dma_desc_enable ++ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { ++ dwc_otg_hcd_qh_free(hcd, qh); ++ return NULL; ++ } ++ ++ return qh; ++} ++ ++/* microframe_schedule=0 start */ ++ ++/** ++ * Checks that a channel is available for a periodic transfer. ++ * ++ * @return 0 if successful, negative error code otherise. ++ */ ++static int periodic_channel_available(dwc_otg_hcd_t * hcd) ++{ ++ /* ++ * Currently assuming that there is a dedicated host channnel for each ++ * periodic transaction plus at least one host channel for ++ * non-periodic transactions. ++ */ ++ int status; ++ int num_channels; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) ++ && (hcd->periodic_channels < num_channels - 1)) { ++ status = 0; ++ } else { ++ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", ++ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that there is sufficient bandwidth for the specified QH in the ++ * periodic schedule. For simplicity, this calculation assumes that all the ++ * transfers in the periodic schedule may occur in the same (micro)frame. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH containing periodic bandwidth required. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ int16_t max_claimed_usecs; ++ ++ status = 0; ++ ++ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { ++ /* ++ * High speed mode. ++ * Max periodic usecs is 80% x 125 usec = 100 usec. ++ */ ++ ++ max_claimed_usecs = 100 - qh->usecs; ++ } else { ++ /* ++ * Full speed mode. ++ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ */ ++ max_claimed_usecs = 900 - qh->usecs; ++ } ++ ++ if (hcd->periodic_usecs > max_claimed_usecs) { ++ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/* microframe_schedule=0 end */ ++ ++/** ++ * Microframe scheduler ++ * track the total use in hcd->frame_usecs ++ * keep each qh use in qh->frame_usecs ++ * when surrendering the qh then donate the time back ++ */ ++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; ++ ++/* ++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init ++ */ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd) ++{ ++ int i; ++ for (i=0; i<8; i++) { ++ _hcd->frame_usecs[i] = max_uframe_usecs[i]; ++ } ++ return 0; ++} ++ ++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++ while (done == 0) { ++ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ ++ if (utime <= _hcd->frame_usecs[i]) { ++ _hcd->frame_usecs[i] -= utime; ++ _qh->frame_usecs[i] += utime; ++ t_left -= utime; ++ ret = i; ++ done = 1; ++ return ret; ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++ } ++ ++/* ++ * use this for FS apps that can span multiple uframes ++ */ ++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ int j; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ unsigned short xtime; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++loop: ++ while (done == 0) { ++ if(_hcd->frame_usecs[i] <= 0) { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ goto loop; ++ } ++ ++ /* ++ * we need n consecutive slots ++ * so use j as a start slot j plus j+1 must be enough time (for now) ++ */ ++ xtime= _hcd->frame_usecs[i]; ++ for (j = i+1 ; j < 8 ; j++ ) { ++ /* ++ * if we add this frame remaining time to xtime we may ++ * be OK, if not we need to test j for a complete frame ++ */ ++ if ((xtime+_hcd->frame_usecs[j]) < utime) { ++ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { ++ j = 8; ++ ret = -1; ++ continue; ++ } ++ } ++ if (xtime >= utime) { ++ ret = i; ++ j = 8; /* stop loop with a good value ret */ ++ continue; ++ } ++ /* add the frame time to x time */ ++ xtime += _hcd->frame_usecs[j]; ++ /* we must have a fully available next frame or break */ ++ if ((xtime < utime) ++ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { ++ ret = -1; ++ j = 8; /* stop loop with a bad value ret */ ++ continue; ++ } ++ } ++ if (ret >= 0) { ++ t_left = utime; ++ for (j = i; (t_left>0) && (j < 8); j++ ) { ++ t_left -= _hcd->frame_usecs[j]; ++ if ( t_left <= 0 ) { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; ++ _hcd->frame_usecs[j]= -t_left; ++ ret = i; ++ done = 1; ++ } else { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j]; ++ _hcd->frame_usecs[j] = 0; ++ } ++ } ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++} ++ ++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int ret; ++ ret = -1; ++ ++ if (_qh->speed == USB_SPEED_HIGH) { ++ /* if this is a hs transaction we need a full frame */ ++ ret = find_single_uframe(_hcd, _qh); ++ } else { ++ /* if this is a fs transaction we may need a sequence of frames */ ++ ret = find_multi_uframe(_hcd, _qh); ++ } ++ return ret; ++} ++ ++/** ++ * Checks that the max transfer size allowed in a host channel is large enough ++ * to handle the maximum data transfer in a single (micro)frame for a periodic ++ * transfer. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for a periodic endpoint. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ uint32_t max_xfer_size; ++ uint32_t max_channel_xfer_size; ++ ++ status = 0; ++ ++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); ++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; ++ ++ if (max_xfer_size > max_channel_xfer_size) { ++ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", ++ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++ ++ ++/** ++ * Schedules an interrupt or isochronous transfer in the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. The QH should already contain the ++ * scheduling information. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ ++ if (microframe_schedule) { ++ int frame; ++ status = find_uframe(hcd, qh); ++ frame = -1; ++ if (status == 0) { ++ frame = 7; ++ } else { ++ if (status > 0 ) ++ frame = status-1; ++ } ++ ++ /* Set the new frame up */ ++ if (frame > -1) { ++ qh->sched_frame &= ~0x7; ++ qh->sched_frame |= (frame & 7); ++ } ++ ++ if (status != -1) ++ status = 0; ++ } else { ++ status = periodic_channel_available(hcd); ++ if (status) { ++ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ status = check_periodic_bandwidth(hcd, qh); ++ } ++ if (status) { ++ DWC_INFO("%s: Insufficient periodic bandwidth for " ++ "periodic transfer.\n", __func__); ++ return status; ++ } ++ status = check_max_xfer_size(hcd, qh); ++ if (status) { ++ DWC_INFO("%s: Channel max transfer size too small " ++ "for periodic transfer.\n", __func__); ++ return status; ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ /* Don't rely on SOF and start in ready schedule */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); ++ } ++ else { ++ if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame))) ++ { ++ hcd->fiq_state->next_sched_frame = qh->sched_frame; ++ ++ } ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); ++ } ++ ++ if (!microframe_schedule) { ++ /* Reserve the periodic channel. */ ++ hcd->periodic_channels++; ++ } ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs += qh->usecs; ++ ++ return status; ++} ++ ++ ++/** ++ * This function adds a QH to either the non periodic or periodic schedule if ++ * it is not already in the schedule. If the QH is already in the schedule, no ++ * action is taken. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH already in a schedule. */ ++ return status; ++ } ++ ++ /* Add the new QH to the appropriate schedule */ ++ if (dwc_qh_is_non_per(qh)) { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, ++ &qh->qh_list_entry); ++ //hcd->fiq_state->kick_np_queues = 1; ++ } else { ++ status = schedule_periodic(hcd, qh); ++ if ( !hcd->periodic_qh_count ) { ++ intr_mask.b.sofintr = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ } ++ } ++ hcd->periodic_qh_count++; ++ } ++ ++ return status; ++} ++ ++/** ++ * Removes an interrupt or isochronous transfer from the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. ++ */ ++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int i; ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs -= qh->usecs; ++ ++ if (!microframe_schedule) { ++ /* Release the periodic channel reservation. */ ++ hcd->periodic_channels--; ++ } else { ++ for (i = 0; i < 8; i++) { ++ hcd->frame_usecs[i] += qh->frame_usecs[i]; ++ qh->frame_usecs[i] = 0; ++ } ++ } ++} ++ ++/** ++ * Removes a QH from either the non-periodic or periodic schedule. Memory is ++ * not freed. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh QH to remove from schedule. */ ++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH is not in a schedule. */ ++ return; ++ } ++ ++ if (dwc_qh_is_non_per(qh)) { ++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ //if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) ++ // hcd->fiq_state->kick_np_queues = 1; ++ } else { ++ deschedule_periodic(hcd, qh); ++ hcd->periodic_qh_count--; ++ if( !hcd->periodic_qh_count && !fiq_fsm_enable ) { ++ intr_mask.b.sofintr = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ } ++ } ++} ++ ++/** ++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active ++ * non-periodic schedule. The QH is added to the inactive non-periodic ++ * schedule if any QTDs are still attached to the QH. ++ * ++ * For periodic QHs, the QH is removed from the periodic queued schedule. If ++ * there are any QTDs still attached to the QH, the QH is added to either the ++ * periodic inactive schedule or the periodic ready schedule and its next ++ * scheduled frame is calculated. The QH is placed in the ready schedule if ++ * the scheduled frame has been reached already. Otherwise it's placed in the ++ * inactive schedule. If there are no QTDs attached to the QH, the QH is ++ * completely removed from the periodic schedule. ++ */ ++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_next_periodic_split) ++{ ++ if (dwc_qh_is_non_per(qh)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule. */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ //hcd->fiq_state->kick_np_queues = 1; ++ } ++ } else { ++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (qh->do_split) { ++ /* Schedule the next continuing periodic split transfer */ ++ if (sched_next_periodic_split) { ++ ++ qh->sched_frame = frame_number; ++ ++ if (dwc_frame_num_le(frame_number, ++ dwc_frame_num_inc ++ (qh->start_split_frame, ++ 1))) { ++ /* ++ * Allow one frame to elapse after start ++ * split microframe before scheduling ++ * complete split, but DONT if we are ++ * doing the next start split in the ++ * same frame for an ISOC out. ++ */ ++ if ((qh->ep_type != UE_ISOCHRONOUS) || ++ (qh->ep_is_in != 0)) { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, 1); ++ } ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->start_split_frame, ++ qh->interval); ++ if (dwc_frame_num_le ++ (qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* ++ * Remove from periodic_sched_queued and move to ++ * appropriate queue. ++ */ ++ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) || ++ (!microframe_schedule && qh->sched_frame == frame_number)) { ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } else { ++ if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame)) ++ { ++ hcd->fiq_state->next_sched_frame = qh->sched_frame; ++ } ++ ++ DWC_LIST_MOVE_HEAD ++ (&hcd->periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } ++ } ++ } ++} ++ ++/** ++ * This function allocates and initializes a QTD. ++ * ++ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up ++ * pointing to each other so each pair should have a unique correlation. ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ ++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qtd_t *qtd; ++ ++ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc); ++ if (qtd == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qtd_init(qtd, urb); ++ return qtd; ++} ++ ++/** ++ * Initializes a QTD structure. ++ * ++ * @param qtd The QTD to initialize. ++ * @param urb The URB to use for initialization. */ ++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); ++ qtd->urb = urb; ++ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { ++ /* ++ * The only time the QTD data toggle is used is on the data ++ * phase of control transfers. This phase always starts with ++ * DATA1. ++ */ ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ qtd->control_phase = DWC_OTG_CONTROL_SETUP; ++ } ++ ++ /* start split */ ++ qtd->complete_split = 0; ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ qtd->in_process = 0; ++ ++ /* Store the qtd ptr in the urb to reference what QTD. */ ++ urb->qtd = qtd; ++ return; ++} ++ ++/** ++ * This function adds a QTD to the QTD-list of a QH. It will find the correct ++ * QH to place the QTD into. If it does not find a QH, then it will create a ++ * new QH. If the QH to which the QTD is added is not currently scheduled, it ++ * is placed into the proper schedule based on its EP type. ++ * HCD lock must be held and interrupts must be disabled on entry ++ * ++ * @param[in] qtd The QTD to add ++ * @param[in] hcd The DWC HCD structure ++ * @param[out] qh out parameter to return queue head ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, ++ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc) ++{ ++ int retval = 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ /* ++ * Get the QH which holds the QTD-list to insert to. Create QH if it ++ * doesn't exist. ++ */ ++ if (*qh == NULL) { ++ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc); ++ if (*qh == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ goto done; ++ } else { ++ if (fiq_enable) ++ hcd->fiq_state->kick_np_queues = 1; ++ } ++ } ++ retval = dwc_otg_hcd_qh_add(hcd, *qh); ++ if (retval == 0) { ++ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, ++ qtd_list_entry); ++ qtd->qh = *qh; ++ } ++done: ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +new file mode 100644 +index 000000000000..6b2c7d0c93f3 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -0,0 +1,188 @@ ++#ifndef _DWC_OS_DEP_H_ ++#define _DWC_OS_DEP_H_ ++ ++/** ++ * @file ++ * ++ * This file contains OS dependent structures. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# include ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include ++#else ++# include ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include ++#else ++# include ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++# include ++#endif ++ ++#ifdef PCI_INTERFACE ++# include ++#endif ++ ++#ifdef LM_INTERFACE ++# include ++# include ++# include ++# include ++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++# include ++# include ++# include ++# include ++# else ++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - ++ here we assume that the machine architecture provides definitions ++ in its own header ++*/ ++# include ++# include ++# endif ++#endif ++ ++#ifdef PLATFORM_INTERFACE ++#include ++#include ++#endif ++ ++/** The OS page size */ ++#define DWC_OS_PAGE_SIZE PAGE_SIZE ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ++typedef int gfp_t; ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++# define IRQF_SHARED SA_SHIRQ ++#endif ++ ++typedef struct os_dependent { ++ /** Base address returned from ioremap() */ ++ void *base; ++ ++ /** Register offset for Diagnostic API */ ++ uint32_t reg_offset; ++ ++ /** Base address for MPHI peripheral */ ++ void *mphi_base; ++ ++#ifdef LM_INTERFACE ++ struct lm_device *lmdev; ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *pcidev; ++ ++ /** Start address of a PCI region */ ++ resource_size_t rsrc_start; ++ ++ /** Length address of a PCI region */ ++ resource_size_t rsrc_len; ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platformdev; ++#endif ++ ++} os_dependent_t; ++ ++#ifdef __cplusplus ++} ++#endif ++ ++ ++ ++/* Type for the our device on the chosen bus */ ++#if defined(LM_INTERFACE) ++typedef struct lm_device dwc_bus_dev_t; ++#elif defined(PCI_INTERFACE) ++typedef struct pci_dev dwc_bus_dev_t; ++#elif defined(PLATFORM_INTERFACE) ++typedef struct platform_device dwc_bus_dev_t; ++#endif ++ ++/* Helper macro to retrieve drvdata from the device on the chosen bus */ ++#if defined(LM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev) ++#endif ++ ++/** ++ * Helper macro returning the otg_device structure of a given struct device ++ * ++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct lm_device *lm_dev = \ ++ container_of(_dev, struct lm_device, dev); \ ++ _var = lm_get_drvdata(lm_dev); \ ++ } while (0) ++ ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ _var = dev_get_drvdata(_dev); \ ++ } while (0) ++ ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ _var = platform_get_drvdata(platform_dev); \ ++ } while (0) ++#endif ++ ++ ++/** ++ * Helper macro returning the struct dev of the given struct os_dependent ++ * ++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev) ++#endif ++ ++ ++ ++ ++#endif /* _DWC_OS_DEP_H_ */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c +new file mode 100644 +index 000000000000..9dabbe5c9791 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c +@@ -0,0 +1,2725 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ ++ * $Revision: #101 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements PCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * PCD Core provides Interface, defined in ++ * header file, which can be used to implement OS specific PCD interface. ++ * ++ * An important function of the PCD is managing interrupts generated ++ * by the DWC_otg controller. The implementation of the DWC_otg device ++ * mode interrupt service routines is in dwc_otg_pcd_intr.c. ++ * ++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). ++ * @todo Does it work when the request size is greater than DEPTSIZ ++ * transfer size ++ * ++ */ ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++ ++extern int init_cfi(cfiobject_t * cfiobj); ++#endif ++ ++/** ++ * Choose endpoint from ep arrays using usb_ep structure. ++ */ ++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function completes a request. It call's the request call back. ++ */ ++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, ++ int32_t status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req); ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ /* spin_unlock/spin_lock now done in fops->complete() */ ++ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, ++ req->actual); ++ ++ if (ep->pcd->request_pending > 0) { ++ --ep->pcd->request_pending; ++ } ++ ++ ep->stopped = stopped; ++ DWC_FREE(req); ++} ++ ++/** ++ * This function terminates all the requsts in the EP request queue. ++ */ ++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ ep->stopped = 1; ++ ++ /* called with irqs blocked?? */ ++ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); ++ } ++} ++ ++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops) ++{ ++ pcd->fops = fops; ++} ++ ++/** ++ * PCD Callback function for initializing the PCD when switching to ++ * device mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_start_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dwc_otg_core_dev_init(core_if); ++ /* Set core_if's lock pointer to the pcd->lock */ ++ core_if->lock = pcd->lock; ++ } ++ return 1; ++} ++ ++/** CFI-specific buffer allocation function for EP */ ++#ifdef DWC_UTE_CFI ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ep = get_ep_from_handle(pcd, pep); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, ++ flags); ++} ++#else ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags); ++#endif ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_resume_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->resume) { ++ pcd->fops->resume(pcd); ++ } ++ ++ /* Stop the SRP timeout timer. */ ++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ++ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { ++ if (GET_CORE_IF(pcd)->srp_timer_started) { ++ GET_CORE_IF(pcd)->srp_timer_started = 0; ++ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer); ++ } ++ } ++ return 1; ++} ++ ++/** ++ * PCD Callback function for notifying the PCD device is suspended. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_suspend_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->suspend) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->suspend(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ ++ return 1; ++} ++ ++/** ++ * PCD Callback function for stopping the PCD when switching to Host ++ * mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_stop_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); ++ ++ dwc_otg_pcd_stop(pcd); ++ return 1; ++} ++ ++/** ++ * PCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t pcd_callbacks = { ++ .start = dwc_otg_pcd_start_cb, ++ .stop = dwc_otg_pcd_stop_cb, ++ .suspend = dwc_otg_pcd_suspend_cb, ++ .resume_wakeup = dwc_otg_pcd_resume_cb, ++ .p = 0, /* Set at registration */ ++}; ++ ++/** ++ * This function allocates a DMA Descriptor chain for the Endpoint ++ * buffer to be used for a transfer to/from the specified endpoint. ++ */ ++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(struct device *dev, ++ dwc_dma_t * dma_desc_addr, ++ uint32_t count) ++{ ++ return DWC_DMA_ALLOC_ATOMIC(dev, count * sizeof(dwc_otg_dev_dma_desc_t), ++ dma_desc_addr); ++} ++ ++/** ++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. ++ */ ++void dwc_otg_ep_free_desc_chain(struct device *dev, ++ dwc_otg_dev_dma_desc_t * desc_addr, ++ uint32_t dma_desc_addr, uint32_t count) ++{ ++ DWC_DMA_FREE(dev, count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, ++ dma_desc_addr); ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ ++ dsts_data_t dsts = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ int i, j; ++ uint32_t len; ++ ++ if (dwc_ep->is_in) ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; ++ else ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ ++ /** Allocate descriptors for double buffering */ ++ dwc_ep->iso_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, ++ dwc_ep->desc_cnt * 2); ++ if (dwc_ep->desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); ++ return; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ uint32_t data_per_desc; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ int offset; ++ ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma)); ++ ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_out.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ data_per_desc = ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = 1; ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = 0; ++ ++ /** Write dma_ad into DOEPDMA register */ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ ++ } ++ /** ISO IN EP */ ++ else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[dwc_ep->num]; ++ unsigned int frmnumber; ++ fifosize_data_t txfifosize, rxfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> ++ dtxfsts); ++ rxfifosize.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = ++ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ ++ frmnumber = dwc_ep->next_frame; ++ ++ sts.b_iso_in.framenum = frmnumber; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ /** Buffer 0 descriptors setup */ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++dma_desc; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_in.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ ++ sts.b_iso_in.ioc = 0; ++ } ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = 1; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; ++ ++ /** Write dma_ad into diepdma register */ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.usbactep = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { ++ return; ++ } else { ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ ++ ep->xfer_len = ++ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; ++ ep->pkt_cnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.mc = ep->pkt_per_frm; ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->out_ep_regs[ep->num]-> ++ doepdma), (uint32_t) ep->dma_addr); ++ ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ if (ep->is_in) { ++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; ++ } else { ++ ep->desc_cnt = ep->pkt_cnt; ++ } ++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); ++ } else { ++ if (core_if->pti_enh_enable) { ++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> ++ xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> ++ dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++ } ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++} ++ ++/** ++ * This function stops transfer for an EP and ++ * resets the ep's variables. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ /* disable the ep */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ ++ if (core_if->dma_desc_enable && ++ ep->iso_desc_addr && ep->iso_dma_desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, ++ ep->iso_dma_desc_addr, ++ ep->desc_cnt * 2); ++ } ++ ++ /* reset varibales */ ++ ep->dma_addr0 = 0; ++ ep->dma_addr1 = 0; ++ ep->xfer_buff0 = 0; ++ ep->xfer_buff1 = 0; ++ ep->data_per_frame = 0; ++ ep->data_pattern_frame = 0; ++ ep->sync_frame = 0; ++ ep->buf_proc_intrvl = 0; ++ ep->bInterval = 0; ++ ep->proc_buf_num = 0; ++ ep->pkt_per_frm = 0; ++ ep->pkt_per_frm = 0; ++ ep->desc_cnt = 0; ++ ep->iso_desc_addr = 0; ++ ep->iso_dma_desc_addr = 0; ++} ++ ++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, ++ dwc_dma_t dma1, int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags = 0; ++ dwc_ep_t *dwc_ep; ++ int32_t frm_data; ++ dsts_data_t dsts; ++ dwc_otg_core_if_t *core_if; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ core_if = GET_CORE_IF(pcd); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (ep->iso_req_handle) { ++ DWC_WARN("ISO request in progress\n"); ++ } ++ ++ dwc_ep->dma_addr0 = dma0; ++ dwc_ep->dma_addr1 = dma1; ++ ++ dwc_ep->xfer_buff0 = buf0; ++ dwc_ep->xfer_buff1 = buf1; ++ ++ dwc_ep->data_per_frame = data_per_frame; ++ ++ /** @todo - pattern data support is to be implemented in the future */ ++ dwc_ep->data_pattern_frame = dp_frame; ++ dwc_ep->sync_frame = sync_frame; ++ ++ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; ++ ++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); ++ ++ dwc_ep->proc_buf_num = 0; ++ ++ dwc_ep->pkt_per_frm = 0; ++ frm_data = ep->dwc_ep.data_per_frame; ++ while (frm_data > 0) { ++ dwc_ep->pkt_per_frm++; ++ frm_data -= ep->dwc_ep.maxpacket; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ if (start_frame == -1) { ++ dwc_ep->next_frame = dsts.b.soffn + 1; ++ if (dwc_ep->bInterval != 1) { ++ dwc_ep->next_frame = ++ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - ++ dwc_ep->next_frame % ++ dwc_ep->bInterval); ++ } ++ } else { ++ dwc_ep->next_frame = start_frame; ++ } ++ ++ if (!core_if->pti_enh_enable) { ++ dwc_ep->pkt_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } else { ++ dwc_ep->pkt_cnt = ++ (dwc_ep->data_per_frame * ++ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) ++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; ++ } ++ ++ if (core_if->dma_desc_enable) { ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } ++ ++ if (atomic_alloc) { ++ dwc_ep->pkt_info = ++ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } else { ++ dwc_ep->pkt_info = ++ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ if (!dwc_ep->pkt_info) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (core_if->pti_enh_enable) { ++ dwc_memset(dwc_ep->pkt_info, 0, ++ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ ++ dwc_ep->cur_pkt = 0; ++ ep->iso_req_handle = req_handle; ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); ++ return 0; ++} ++ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); ++ ++ DWC_FREE(dwc_ep->pkt_info); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (ep->iso_req_handle != req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ ep->iso_req_handle = 0; ++ return 0; ++} ++ ++/** ++ * This function is used for perodical data exchnage between PCD and gadget drivers. ++ * for Isochronous EPs ++ * ++ * - Every time a sync period completes this function is called to ++ * perform data exchange between PCD and gadget ++ */ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle) ++{ ++ int i; ++ dwc_ep_t *dwc_ep; ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, ++ dwc_ep->proc_buf_num ^ 0x1); ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { ++ dwc_ep->pkt_info[i].status = 0; ++ dwc_ep->pkt_info[i].offset = 0; ++ dwc_ep->pkt_info[i].length = 0; ++ } ++} ++ ++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ return dwc_ep->pkt_cnt; ++} ++ ++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, int *offset) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) ++ DWC_WARN("bad ep\n"); ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ *status = dwc_ep->pkt_info[packet].status; ++ *actual = dwc_ep->pkt_info[packet].length; ++ *offset = dwc_ep->pkt_info[packet].offset; ++} ++ ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, ++ uint32_t is_in, uint32_t ep_num) ++{ ++ /* Init EP structure */ ++ pcd_ep->desc = 0; ++ pcd_ep->pcd = pcd; ++ pcd_ep->stopped = 1; ++ pcd_ep->queue_sof = 0; ++ ++ /* Init DWC ep structure */ ++ pcd_ep->dwc_ep.is_in = is_in; ++ pcd_ep->dwc_ep.num = ep_num; ++ pcd_ep->dwc_ep.active = 0; ++ pcd_ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ pcd_ep->dwc_ep.dma_addr = 0; ++ pcd_ep->dwc_ep.start_xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_len = 0; ++ pcd_ep->dwc_ep.xfer_count = 0; ++ pcd_ep->dwc_ep.sent_zlp = 0; ++ pcd_ep->dwc_ep.total_len = 0; ++ pcd_ep->dwc_ep.desc_addr = 0; ++ pcd_ep->dwc_ep.dma_desc_addr = 0; ++ DWC_CIRCLEQ_INIT(&pcd_ep->queue); ++} ++ ++/** ++ * Initialize ep's ++ */ ++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) ++{ ++ int i; ++ uint32_t hwcfg1; ++ dwc_otg_pcd_ep_t *ep; ++ int in_ep_cntr, out_ep_cntr; ++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; ++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &pcd->ep0; ++ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); ++ ++ in_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; ++ for (i = 1; in_ep_cntr < num_in_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; ++ in_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); ++ ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ out_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; ++ for (i = 1; out_ep_cntr < num_out_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; ++ out_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ pcd->ep0state = EP0_DISCONNECT; ++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++} ++ ++/** ++ * This function is called when the SRP timer expires. The SRP should ++ * complete within 6 seconds. ++ */ ++static void srp_timeout(void *ptr) ++{ ++ gotgctl_data_t gotgctl; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; ++ ++ gotgctl.d32 = DWC_READ_REG32(addr); ++ ++ core_if->srp_timer_started = 0; ++ ++ if (core_if->adp_enable) { ++ if (gotgctl.b.bsesvld == 0) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n"); ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, ++ gotgctl.d32, 0); ++ ++ core_if->srp_success = 0; ++ } else { ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } ++ } else if (gotgctl.b.sesreq) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } else { ++ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); ++ } ++} ++ ++/** ++ * Tasklet ++ * ++ */ ++extern void start_next_request(dwc_otg_pcd_ep_t * ep); ++ ++static void start_xfer_tasklet_func(void *data) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ int i; ++ depctl_data_t diepctl; ++ ++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); ++ ++ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0.queue_sof) { ++ pcd->ep0.queue_sof = 0; ++ start_next_request(&pcd->ep0); ++ // break; ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { ++ depctl_data_t diepctl; ++ diepctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ ++ if (pcd->in_ep[i].queue_sof) { ++ pcd->in_ep[i].queue_sof = 0; ++ start_next_request(&pcd->in_ep[i]); ++ // break; ++ } ++ } ++ ++ return; ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev) ++{ ++ struct device *dev = &otg_dev->os_dep.platformdev->dev; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ dwc_otg_pcd_t *pcd = NULL; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ ++ /* ++ * Allocate PCD structure ++ */ ++ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t)); ++ ++ if (pcd == NULL) { ++ return NULL; ++ } ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(pcd->lock); ++#else ++ pcd->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", ++ pcd, core_if);//GRAYG ++ if (!pcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ /* Set core_if's lock pointer to hcd->lock */ ++ core_if->lock = pcd->lock; ++ pcd->core_if = core_if; ++ ++ dev_if = core_if->dev_if; ++ dev_if->isoc_ep = NULL; ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); ++ } else { ++ DWC_PRINTF("Shared Tx FIFO mode\n"); ++ } ++ ++ /* ++ * Initialized the Core for Device mode here if there is nod ADP support. ++ * Otherwise it will be done later in dwc_otg_adp_start routine. ++ */ ++ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) { ++ dwc_otg_core_dev_init(core_if); ++ } ++ ++ /* ++ * Register the PCD Callbacks. ++ */ ++ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); ++ ++ /* ++ * Initialize the DMA buffer for SETUP packets ++ */ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ pcd->setup_pkt = ++ DWC_DMA_ALLOC(dev, sizeof(*pcd->setup_pkt) * 5, ++ &pcd->setup_pkt_dma_handle); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = ++ DWC_DMA_ALLOC(dev, sizeof(uint16_t), ++ &pcd->status_buf_dma_handle); ++ if (pcd->status_buf == NULL) { ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dev_if->setup_desc_addr[0] = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_setup_desc_addr[0], 1); ++ dev_if->setup_desc_addr[1] = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_setup_desc_addr[1], 1); ++ dev_if->in_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_in_desc_addr, 1); ++ dev_if->out_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_out_desc_addr, 1); ++ pcd->data_terminated = 0; ++ ++ if (dev_if->setup_desc_addr[0] == 0 ++ || dev_if->setup_desc_addr[1] == 0 ++ || dev_if->in_desc_addr == 0 ++ || dev_if->out_desc_addr == 0) { ++ ++ if (dev_if->out_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, 1); ++ if (dev_if->in_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ if (dev_if->setup_desc_addr[1]) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr[1], 1); ++ if (dev_if->setup_desc_addr[0]) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr[0], 1); ++ ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(dev, sizeof(*pcd->status_buf), ++ pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ ++ DWC_FREE(pcd); ++ ++ return NULL; ++ } ++ } ++ } else { ++ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t)); ++ if (pcd->status_buf == NULL) { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ } ++ ++ dwc_otg_pcd_reinit(pcd); ++ ++ /* Allocate the cfi object for the PCD */ ++#ifdef DWC_UTE_CFI ++ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t)); ++ if (NULL == pcd->cfi) ++ goto fail; ++ if (init_cfi(pcd->cfi)) { ++ CFI_INFO("%s: Failed to init the CFI object\n", __func__); ++ goto fail; ++ } ++#endif ++ ++ /* Initialize tasklets */ ++ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet", ++ start_xfer_tasklet_func, pcd); ++ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet", ++ do_test_mode, pcd); ++ ++ /* Initialize SRP timer */ ++ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); ++ ++ if (core_if->core_params->dev_out_nak) { ++ /** ++ * Initialize xfer timeout timer. Implemented for ++ * 2.93a feature "Device DDMA OUT NAK Enhancement" ++ */ ++ for(i = 0; i < MAX_EPS_CHANNELS; i++) { ++ pcd->core_if->ep_xfer_timer[i] = ++ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout, ++ &pcd->core_if->ep_xfer_info[i]); ++ } ++ } ++ ++ return pcd; ++#ifdef DWC_UTE_CFI ++fail: ++#endif ++ if (pcd->setup_pkt) ++ DWC_FREE(pcd->setup_pkt); ++ if (pcd->status_buf) ++ DWC_FREE(pcd->status_buf); ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi) ++ DWC_FREE(pcd->cfi); ++#endif ++ if (pcd) ++ DWC_FREE(pcd); ++ return NULL; ++ ++} ++ ++/** ++ * Remove PCD specific data ++ */ ++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ int i; ++ ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]); ++ pcd->core_if->ep_xfer_info[i].state = 0; ++ } ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(dev, sizeof(uint16_t), pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr ++ [0], 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr ++ [1], 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, ++ 1); ++ } ++ } else { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(pcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ pcd->core_if->lock = NULL; ++ ++ DWC_TASK_FREE(pcd->start_xfer_tasklet); ++ DWC_TASK_FREE(pcd->test_mode_tasklet); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ if (pcd->core_if->ep_xfer_timer[i]) { ++ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]); ++ } ++ } ++ } ++ ++/* Release the CFI object's dynamic memory */ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.release) { ++ pcd->cfi->ops.release(pcd->cfi); ++ } ++#endif ++ ++ DWC_FREE(pcd); ++} ++ ++/** ++ * Returns whether registered pcd is dual speed or not ++ */ ++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || ++ ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls))) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * Returns whether registered pcd is OTG capable or not ++ */ ++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t TxMsk = 1; ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { ++ if ((TxMsk & core_if->tx_msk) == 0) { ++ core_if->tx_msk |= TxMsk; ++ return i + 1; ++ } ++ TxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t PerTxMsk = 1; ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { ++ if ((PerTxMsk & core_if->p_tx_msk) == 0) { ++ core_if->p_tx_msk |= PerTxMsk; ++ return i + 1; ++ } ++ PerTxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, ++ uint32_t fifo_num) ++{ ++ core_if->p_tx_msk = ++ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) ++{ ++ core_if->tx_msk = ++ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; ++} ++ ++/** ++ * This function is being called from gadget ++ * to enable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep) ++{ ++ int num, dir; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ const usb_endpoint_descriptor_t *desc; ++ dwc_irqflags_t flags; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ int retval = 0; ++ int i, epcount; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ ++ desc = (const usb_endpoint_descriptor_t *)ep_desc; ++ ++ if (!desc) { ++ pcd->ep0.priv = usb_ep; ++ ep = &pcd->ep0; ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ num = UE_GET_ADDR(desc->bEndpointAddress); ++ dir = UE_GET_DIR(desc->bEndpointAddress); ++ ++ if (!desc->wMaxPacketSize) { ++ DWC_WARN("bad maxpacketsize\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ if (dir == UE_DIR_IN) { ++ epcount = pcd->core_if->dev_if->num_in_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->in_ep[i].dwc_ep.num) { ++ ep = &pcd->in_ep[i]; ++ break; ++ } ++ } ++ } else { ++ epcount = pcd->core_if->dev_if->num_out_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->out_ep[i].dwc_ep.num) { ++ ep = &pcd->out_ep[i]; ++ break; ++ } ++ } ++ } ++ ++ if (!ep) { ++ DWC_WARN("bad address\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ ep->desc = desc; ++ ep->priv = usb_ep; ++ ++ /* ++ * Activate the EP ++ */ ++ ep->stopped = 0; ++ ++ ep->dwc_ep.is_in = (dir == UE_DIR_IN); ++ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); ++ ++ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; ++ ++ if (ep->dwc_ep.is_in) { ++ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { ++ /* ++ * if ISOC EP then assign a Periodic Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_perio_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ } else { ++ /* ++ * if Dedicated FIFOs mode is on then assign a Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ ++ /* Calculating EP info controller base address */ ++ if (ep->dwc_ep.tx_fifo_num ++ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16); ++ gdfifocfg.b.epinfobase = ++ gdfifocfgbase.d32 + dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ /* Set initial data PID. */ ++ if (ep->dwc_ep.type == UE_BULK) { ++ ep->dwc_ep.data_pid_start = 0; ++ } ++ ++ /* Alloc DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++#ifndef DWC_UTE_PER_IO ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++#endif ++ ep->dwc_ep.desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &ep->dwc_ep.dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ if (!ep->dwc_ep.desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor\n", ++ __func__); ++ retval = -DWC_E_SHUTDOWN; ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ goto out; ++ } ++#ifndef DWC_UTE_PER_IO ++ } ++#endif ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); ++#ifdef DWC_UTE_PER_IO ++ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1); ++#endif ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.ep_enable) { ++ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); ++ } ++#endif ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out: ++ return retval; ++} ++ ++/** ++ * This function is being called from gadget ++ * to disable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ dwc_dma_t dma_desc_addr; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc) { ++ DWC_DEBUGPL(DBG_PCD, "bad ep address\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ dwc_otg_request_nuke(ep); ++ ++ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]); ++ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0; ++ } ++ ep->desc = NULL; ++ ep->stopped = 1; ++ ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ ++ if (ep->dwc_ep.is_in) { ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), ++ ep->dwc_ep.tx_fifo_num); ++ } ++ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Decreasing EPinfo Base Addr */ ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16); ++ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ ++ /* Free DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++ desc_addr = ep->dwc_ep.desc_addr; ++ dma_desc_addr = ep->dwc_ep.dma_desc_addr; ++ ++ /* Cannot call dma_free_coherent() with IRQs disabled */ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_ep_free_desc_chain(dev, desc_addr, dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ ++ goto out_unlocked; ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out_unlocked: ++ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ return 0; ++ ++} ++ ++/******************************************************************************/ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * Free the request and its extended parts ++ * ++ */ ++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req) ++{ ++ DWC_FREE(req->ext_req.per_io_frame_descs); ++ DWC_FREE(req); ++} ++ ++/** ++ * Start the next request in the endpoint's queue. ++ * ++ */ ++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd, ++ dwc_otg_pcd_ep_t * ep) ++{ ++ int i; ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_ep_t *dwcep = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso; ++ uint16_t nat; ++ depctl_data_t diepctl; ++ ++ dwcep = &ep->dwc_ep; ++ ++ if (dwcep->xiso_active_xfers > 0) { ++#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers ++ DWC_WARN("There are currently active transfers for EP%d \ ++ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, ++ dwcep->xiso_queued_xfers); ++#endif ++ return 0; ++ } ++ ++ nat = UGETW(ep->desc->wMaxPacketSize); ++ nat = (nat >> 11) & 0x03; ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ereq = &req->ext_req; ++ ep->stopped = 0; ++ ++ /* Get the frame number */ ++ dwcep->xiso_frame_num = ++ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num); ++ ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->is_in) { ++ /* Setup DMA Descriptor chain for IN Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ if ( i > 0 ) ++ dwcep->xiso_frame_num = ++ (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_in.txbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_in.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_in.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_in.txsts = 0; ++ dwcep->desc_addr[i].status.b_iso_in.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepdma, ++ dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepctl, 0, ++ diepctl.d32); ++ } else { ++ /* Setup DMA Descriptor chain for OUT Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ dwcep->xiso_frame_num = (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_out.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_out.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0; ++ dwcep->desc_addr[i].status.b_iso_out.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepdma, dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepctl, 0, diepctl.d32); ++ } ++ ++ } else { ++ ep->stopped = 1; ++ } ++ ++ return 0; ++} ++ ++/** ++ * - Remove the request from the queue ++ */ ++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL; ++ dwc_ep_t *dwcep = NULL; ++ int i; ++ ++ //DWC_DEBUG(); ++ dwcep = &ep->dwc_ep; ++ ++ /* Get the first pending request from the queue */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ dwcep->xiso_active_xfers--; ++ dwcep->xiso_queued_xfers--; ++ /* Remove this request from the queue */ ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ ep->stopped = 1; ++ ereq = &req->ext_req; ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->xiso_active_xfers < 0) { ++ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num, ++ dwcep->xiso_active_xfers); ++ } ++ ++ /* Fill the Isoc descs of portable extended req from dma descriptors */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ if (dwcep->is_in) { /* IN endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_in.txbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_in.txsts; ++ } else { /* OUT endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_out.rxsts; ++ } ++ } ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ ++ /* Call the completion function in the non-portable logic */ ++ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0, ++ &req->ext_req); ++ ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ /* Free the request - specific freeing needed for extended request object */ ++ dwc_pcd_xiso_ereq_free(ep, req); ++ ++ /* Start the next request */ ++ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep); ++ ++ return; ++} ++ ++/** ++ * Create and initialize the Isoc pkt descriptors of the extended request. ++ * ++ */ ++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req, ++ void *ereq_nonport, ++ int atomic_alloc) ++{ ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_xreq_port *req_mapped = NULL; ++ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */ ++ uint32_t pkt_count; ++ int i; ++ ++ ereq = &req->ext_req; ++ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport; ++ pkt_count = req_mapped->pio_pkt_count; ++ ++ /* Create the isoc descs */ ++ if (atomic_alloc) { ++ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count); ++ } else { ++ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count); ++ } ++ ++ if (!ipds) { ++ DWC_ERROR("Failed to allocate isoc descriptors"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the extended request fields */ ++ ereq->per_io_frame_descs = ipds; ++ ereq->error_count = 0; ++ ereq->pio_alloc_pkt_count = pkt_count; ++ ereq->pio_pkt_count = pkt_count; ++ ereq->tr_sub_flags = req_mapped->tr_sub_flags; ++ ++ /* Init the Isoc descriptors */ ++ for (i = 0; i < pkt_count; i++) { ++ ipds[i].length = req_mapped->per_io_frame_descs[i].length; ++ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset; ++ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */ ++ ipds[i].actual_length = ++ req_mapped->per_io_frame_descs[i].actual_length; ++ } ++ ++ return 0; ++} ++ ++static void prn_ext_request(struct dwc_iso_xreq_port *ereq) ++{ ++ struct dwc_iso_pkt_desc_port *xfd = NULL; ++ int i; ++ ++ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs); ++ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags); ++ DWC_DEBUG("error_count=%d", ereq->error_count); ++ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count); ++ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count); ++ DWC_DEBUG("res=%d", ereq->res); ++ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ xfd = &ereq->per_io_frame_descs[0]; ++ DWC_DEBUG("FD #%d", i); ++ ++ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length); ++ DWC_DEBUG("xfd->length=%d", xfd->length); ++ DWC_DEBUG("xfd->offset=%d", xfd->offset); ++ DWC_DEBUG("xfd->status=%d", xfd->status); ++ } ++} ++ ++/** ++ * ++ */ ++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc, ++ void *ereq_nonport) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int res; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ /* We support this extension only for DDMA mode */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ if (!GET_CORE_IF(pcd)->dma_desc_enable) ++ return -DWC_E_INVALID; ++ ++ /* Create a dwc_otg_pcd_request_t object */ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Create the Isoc descs for this request which shall be the exact match ++ * of the structure sent to us from the non-portable logic */ ++ res = ++ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc); ++ if (res) { ++ DWC_WARN("Failed to init the Isoc descriptors"); ++ DWC_FREE(req); ++ return res; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ ++ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ /* Add this request to the tail */ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ ep->dwc_ep.xiso_queued_xfers++; ++ ++//DWC_DEBUG("CP_0"); ++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags); ++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport); ++//prn_ext_request(&req->ext_req); ++ ++ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ /* If the req->status == ASAP then check if there is any active transfer ++ * for this endpoint. If no active transfers, then get the first entry ++ * from the queue and start that transfer ++ */ ++ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) { ++ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep); ++ if (res) { ++ DWC_WARN("Failed to start the next Isoc transfer"); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ DWC_FREE(req); ++ return res; ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return 0; ++} ++ ++#endif ++/* END ifdef DWC_UTE_PER_IO ***************************************************/ ++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc) ++{ ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t max_transfer; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ if (!GET_CORE_IF(pcd)->core_params->opt) { ++ if (ep->dwc_ep.num != 0) { ++ DWC_ERROR("queue req %p, len %d buf %p\n", ++ req_handle, buflen, buf); ++ } ++ } ++ ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ req->dw_align_buf = NULL; ++ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable ++ && !GET_CORE_IF(pcd)->dma_desc_enable) ++ req->dw_align_buf = DWC_DMA_ALLOC(dev, buflen, ++ &req->dw_align_buf_dma); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* ++ * After adding request to the queue for IN ISOC wait for In Token Received ++ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token ++ * Received when EP is disabled interrupt to obtain starting microframe ++ * (odd/even) start transfer ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ if (req != 0) { ++ depctl_data_t depctl = {.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl) }; ++ ++pcd->request_pending; ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in) { ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl, depctl.d32); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return 0; ++ } ++ ++ /* ++ * For EP0 IN without premature status, zlp is required? ++ */ ++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { ++ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); ++ //_req->zero = 1; ++ } ++ ++ /* Start the transfer */ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { ++ /* EP0 Transfer? */ ++ if (ep->dwc_ep.num == 0) { ++ switch (pcd->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_DATA_PHASE\n", ++ __func__); ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_OUT_DATA_PHASE\n", ++ __func__); ++ if (pcd->request_config) { ++ /* Complete STATUS PHASE */ ++ ep->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_STATUS_PHASE\n", ++ __func__); ++ break; ++ ++ default: ++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", ++ pcd->ep0state); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_SHUTDOWN; ++ } ++ ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = buflen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ if (zero) { ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.xfer_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } // non-ep0 endpoints ++ else { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ /* store the request length */ ++ ep->dwc_ep.cfi_req_len = buflen; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ++ ep, req); ++ } else { ++#endif ++ max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params-> ++ max_transfer_size; ++ ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf){ ++ if (ep->dwc_ep.is_in) ++ dwc_memcpy(req->dw_align_buf, ++ buf, buflen); ++ ep->dwc_ep.dma_addr = ++ req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = ++ req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = ++ req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ } ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = ++ DDMA_MAX_TRANSFER_SIZE - ++ (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > ++ out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ++ ep->dwc_ep.maxpacket); ++ } ++ ++ if (zero) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } ++ ++ if (req != 0) { ++ ++pcd->request_pending; ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in && ep->stopped ++ && !(GET_CORE_IF(pcd)->dma_enable)) { ++ /** @todo NGS Create a function for this. */ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ if (GET_CORE_IF(pcd)->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs->diepeachintmsk ++ [ep->dwc_ep.num], 0, ++ diepmsk.d32); ++ } else { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs-> ++ diepmsk, 0, diepmsk.d32); ++ } ++ ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return 0; ++} ++ ++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad argument\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { ++ if (req->priv == (void *)req_handle) { ++ break; ++ } ++ } ++ ++ if (req->priv != (void *)req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { ++ dwc_otg_request_done(ep, req, -DWC_E_RESTART); ++ } else { ++ req = NULL; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return req ? 0 : -DWC_E_SHUTDOWN; ++ ++} ++ ++/** ++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative DWC error code. ++ */ ++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if ((!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else { ++ /* This code needs to be reviewed */ ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep. ++ tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->in_ep_regs[ep->dwc_ep.num]-> ++ dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || (!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else if (value == 0) { ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } else if (value == 1) { ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } else if (value == 2) { ++ ep->dwc_ep.stall_clear_flag = 0; ++ } else if (value == 3) { ++ ep->dwc_ep.stall_clear_flag = 1; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++/** ++ * This function initiates remote wakeup of the host from suspend state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) ++{ ++ dctl_data_t dctl = { 0 }; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dsts_data_t dsts; ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ if (!dsts.b.suspsts) { ++ DWC_WARN("Remote wakeup while is not in suspend state\n"); ++ } ++ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ ++ if (pcd->remote_wakeup_enable) { ++ if (set) { ++ ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn; ++ ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ dwc_otg_initiate_srp(core_if); ++ } ++ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ ++ dwc_mdelay(2); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function initiates remote wakeup of the host from L1 sleep state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) ++{ ++ glpmcfg_data_t lpmcfg; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ /* Check if we are in L1 state */ ++ if (!lpmcfg.b.prt_sleep_sts) { ++ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); ++ return; ++ } ++ ++ /* Check if host allows remote wakeup */ ++ if (!lpmcfg.b.rem_wkup_en) { ++ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); ++ return; ++ } ++ ++ /* Check if Resume OK */ ++ if (!lpmcfg.b.sleep_state_resumeok) { ++ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); ++ return; ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ if (set) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.rmtwkupsig = 1; ++ /* Set RmtWkUpSig bit to start remote wakup signaling. ++ * Hardware will automatically clear this bit. ++ */ ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ } ++ ++} ++#endif ++ ++/** ++ * Performs remote wakeup. ++ */ ++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_irqflags_t flags; ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->lx_state == DWC_OTG_L1) { ++ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); ++ } else { ++#endif ++ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ } ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return; ++} ++ ++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl = { 0 }; ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl.b.sftdiscon = 1; ++ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0); ++ ++ } else{ ++ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n"); ++ } ++ return; ++ ++} ++ ++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) ++{ ++ dsts_data_t dsts; ++ gotgctl_data_t gotgctl; ++ ++ /* ++ * This function starts the Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++ ++ /* Check if valid session */ ++ gotgctl.d32 = ++ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); ++ if (gotgctl.b.bsesvld) { ++ /* Check if suspend state */ ++ dsts.d32 = ++ DWC_READ_REG32(& ++ (GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts)); ++ if (dsts.b.suspsts) { ++ dwc_otg_pcd_remote_wakeup(pcd, 1); ++ } ++ } else { ++ dwc_otg_pcd_initiate_srp(pcd); ++ } ++ ++ return 0; ++ ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ dwc_otg_initiate_srp(GET_CORE_IF(pcd)); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++} ++ ++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) ++{ ++ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++} ++ ++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) ++{ ++ return GET_CORE_IF(pcd)->core_params->lpm_enable; ++} ++ ++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->b_hnp_enable; ++} ++ ++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_hnp_support; ++} ++ ++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_alt_hnp_support; ++} ++ ++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->remote_wakeup_enable; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd.h b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h +new file mode 100644 +index 000000000000..a70ebd049d2c +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h +@@ -0,0 +1,273 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ ++ * $Revision: #48 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#if !defined(__DWC_PCD_H__) ++#define __DWC_PCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_driver.h" ++ ++struct cfiobject; ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Perpherial Contoller Driver (PCD). ++ * ++ * The Peripheral Controller Driver (PCD) for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. For ++ * the Mass Storage Function driver the File-backed USB Storage Gadget ++ * (FBS) driver will be used. The FBS driver supports the ++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only ++ * transports. ++ * ++ */ ++ ++/** Invalid DMA Address */ ++#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0) ++ ++/** Max Transfer size for any EP */ ++#define DDMA_MAX_TRANSFER_SIZE 65535 ++ ++/** ++ * Get the pointer to the core_if from the pcd pointer. ++ */ ++#define GET_CORE_IF( _pcd ) (_pcd->core_if) ++ ++/** ++ * States of EP0. ++ */ ++typedef enum ep0_state { ++ EP0_DISCONNECT, /* no host */ ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_IN_STATUS_PHASE, ++ EP0_OUT_STATUS_PHASE, ++ EP0_STALL, ++} ep0state_e; ++ ++/** Fordward declaration.*/ ++struct dwc_otg_pcd; ++ ++/** DWC_otg iso request structure. ++ * ++ */ ++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; ++ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * This shall be the exact analogy of the same type structure defined in the ++ * usb_gadget.h. Each descriptor contains ++ */ ++struct dwc_iso_pkt_desc_port { ++ uint32_t offset; ++ uint32_t length; /* expected length */ ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_iso_xreq_port { ++ /** transfer/submission flag */ ++ uint32_t tr_sub_flags; ++ /** Start the request ASAP */ ++#define DWC_EREQ_TF_ASAP 0x00000002 ++ /** Just enqueue the request w/o initiating a transfer */ ++#define DWC_EREQ_TF_ENQUEUE 0x00000004 ++ ++ /** ++ * count of ISO packets attached to this request - shall ++ * not exceed the pio_alloc_pkt_count ++ */ ++ uint32_t pio_pkt_count; ++ /** count of ISO packets allocated for this request */ ++ uint32_t pio_alloc_pkt_count; ++ /** number of ISO packet errors */ ++ uint32_t error_count; ++ /** reserved for future extension */ ++ uint32_t res; ++ /** Will be allocated and freed in the UTE gadget and based on the CFC value */ ++ struct dwc_iso_pkt_desc_port *per_io_frame_descs; ++}; ++#endif ++/** DWC_otg request structure. ++ * This structure is a list of requests. ++ */ ++typedef struct dwc_otg_pcd_request { ++ void *priv; ++ void *buf; ++ dwc_dma_t dma; ++ uint32_t length; ++ uint32_t actual; ++ unsigned sent_zlp:1; ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ **/ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; ++#ifdef DWC_UTE_PER_IO ++ struct dwc_iso_xreq_port ext_req; ++ //void *priv_ereq_nport; /* */ ++#endif ++} dwc_otg_pcd_request_t; ++ ++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); ++ ++/** PCD EP structure. ++ * This structure describes an EP, there is an array of EPs in the PCD ++ * structure. ++ */ ++typedef struct dwc_otg_pcd_ep { ++ /** USB EP Descriptor */ ++ const usb_endpoint_descriptor_t *desc; ++ ++ /** queue of dwc_otg_pcd_requests. */ ++ struct req_list queue; ++ unsigned stopped:1; ++ unsigned disabling:1; ++ unsigned dma:1; ++ unsigned queue_sof:1; ++ ++#ifdef DWC_EN_ISOC ++ /** ISOC req handle passed */ ++ void *iso_req_handle; ++#endif //_EN_ISOC_ ++ ++ /** DWC_otg ep data. */ ++ dwc_ep_t dwc_ep; ++ ++ /** Pointer to PCD */ ++ struct dwc_otg_pcd *pcd; ++ ++ void *priv; ++} dwc_otg_pcd_ep_t; ++ ++/** DWC_otg PCD Structure. ++ * This structure encapsulates the data for the dwc_otg PCD. ++ */ ++struct dwc_otg_pcd { ++ const struct dwc_otg_pcd_function_ops *fops; ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** Core Interface */ ++ dwc_otg_core_if_t *core_if; ++ /** State of EP0 */ ++ ep0state_e ep0state; ++ /** EP0 Request is pending */ ++ unsigned ep0_pending:1; ++ /** Indicates when SET CONFIGURATION Request is in process */ ++ unsigned request_config:1; ++ /** The state of the Remote Wakeup Enable. */ ++ unsigned remote_wakeup_enable:1; ++ /** The state of the B-Device HNP Enable. */ ++ unsigned b_hnp_enable:1; ++ /** The state of A-Device HNP Support. */ ++ unsigned a_hnp_support:1; ++ /** The state of the A-Device Alt HNP support. */ ++ unsigned a_alt_hnp_support:1; ++ /** Count of pending Requests */ ++ unsigned request_pending; ++ ++ /** SETUP packet for EP0 ++ * This structure is allocated as a DMA buffer on PCD initialization ++ * with enough space for up to 3 setup packets. ++ */ ++ union { ++ usb_device_request_t req; ++ uint32_t d32[2]; ++ } *setup_pkt; ++ ++ dwc_dma_t setup_pkt_dma_handle; ++ ++ /* Additional buffer and flag for CTRL_WR premature case */ ++ uint8_t *backup_buf; ++ unsigned data_terminated; ++ ++ /** 2-byte dma buffer used to return status from GET_STATUS */ ++ uint16_t *status_buf; ++ dwc_dma_t status_buf_dma_handle; ++ ++ /** EP0 */ ++ dwc_otg_pcd_ep_t ep0; ++ ++ /** Array of IN EPs. */ ++ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; ++ /** Array of OUT EPs. */ ++ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; ++ /** number of valid EPs in the above array. */ ++// unsigned num_eps : 4; ++ dwc_spinlock_t *lock; ++ ++ /** Tasklet to defer starting of TEST mode transmissions until ++ * Status Phase has been completed. ++ */ ++ dwc_tasklet_t *test_mode_tasklet; ++ ++ /** Tasklet to delay starting of xfer in DMA mode */ ++ dwc_tasklet_t *start_xfer_tasklet; ++ ++ /** The test mode to enter when the tasklet is executed. */ ++ unsigned test_mode; ++ /** The cfi_api structure that implements most of the CFI API ++ * and OTG specific core configuration functionality ++ */ ++#ifdef DWC_UTE_CFI ++ struct cfiobject *cfi; ++#endif ++ ++}; ++ ++static inline struct device *dwc_otg_pcd_to_dev(struct dwc_otg_pcd *pcd) ++{ ++ return &pcd->otg_dev->os_dep.platformdev->dev; ++} ++ ++//FIXME this functions should be static, and this prototypes should be removed ++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); ++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, ++ dwc_otg_pcd_request_t * req, int32_t status); ++ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle); ++ ++extern void do_test_mode(void *data); ++#endif ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h +new file mode 100644 +index 000000000000..4c1d591fbc09 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h +@@ -0,0 +1,361 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ ++ * $Revision: #11 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#if !defined(__DWC_PCD_IF_H__) ++#define __DWC_PCD_IF_H__ ++ ++//#include "dwc_os.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_driver.h" ++ ++/** @file ++ * This file defines DWC_OTG PCD Core API. ++ */ ++ ++struct dwc_otg_pcd; ++typedef struct dwc_otg_pcd dwc_otg_pcd_t; ++ ++/** Maxpacket size for EP0 */ ++#define MAX_EP0_SIZE 64 ++/** Maxpacket size for any EP */ ++#define MAX_PACKET_SIZE 1024 ++ ++/** @name Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function will be called whenever a previously queued request has ++ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a ++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, ++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid ++ * parameters. */ ++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ uint32_t actual); ++/** ++ * This function will be called whenever a previousle queued ISOC request has ++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count ++ * function. ++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* ++ * functions. ++ */ ++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num); ++/** This function should handle any SETUP request that cannot be handled by the ++ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any ++ * class-specific requests, etc. The function must non-blocking. ++ * ++ * Returns 0 on success. ++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. ++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. ++ * Returns -DWC_E_SHUTDOWN on any other error. */ ++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); ++/** This is called whenever the device has been disconnected. The function ++ * driver should take appropriate action to clean up all pending requests in the ++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset ++ * state. */ ++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been connected. */ ++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); ++/** This function is called when device has been suspended */ ++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has received LPM tokens, i.e. ++ * device has been sent to sleep state. */ ++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been resumed ++ * from suspend(L2) or L1 sleep state. */ ++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever hnp params has been changed. ++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions ++ * to get hnp parameters. */ ++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever USB RESET is detected. */ ++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); ++ ++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); ++ ++/** ++ * ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param ereq_port Pointer to the extended request structure created in the ++ * portable part. ++ */ ++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ void *ereq_port); ++/** Function Driver Ops Data Structure */ ++struct dwc_otg_pcd_function_ops { ++ dwc_connect_cb_t connect; ++ dwc_disconnect_cb_t disconnect; ++ dwc_setup_cb_t setup; ++ dwc_completion_cb_t complete; ++ dwc_isoc_completion_cb_t isoc_complete; ++ dwc_suspend_cb_t suspend; ++ dwc_sleep_cb_t sleep; ++ dwc_resume_cb_t resume; ++ dwc_reset_cb_t reset; ++ dwc_hnp_params_changed_cb_t hnp_changed; ++ cfi_setup_cb_t cfi_setup; ++#ifdef DWC_UTE_PER_IO ++ xiso_completion_cb_t xisoc_complete; ++#endif ++}; ++/** @} */ ++ ++/** @name Function Driver Functions */ ++/** @{ */ ++ ++/** Call this function to get pointer on dwc_otg_pcd_t, ++ * this pointer will be used for all PCD API functions. ++ * ++ * @param core_if The DWC_OTG Core ++ */ ++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev); ++ ++/** Frees PCD allocated by dwc_otg_pcd_init ++ * ++ * @param pcd The PCD ++ */ ++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); ++ ++/** Call this to bind the function driver to the PCD Core. ++ * ++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. ++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. ++ */ ++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops); ++ ++/** Enables an endpoint for use. This function enables an endpoint in ++ * the PCD. The endpoint is described by the ep_desc which has the ++ * same format as a USB ep descriptor. The ep_handle parameter is used to refer ++ * to the endpoint from other API functions and in callbacks. Normally this ++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the ++ * core for that interface. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. ++ * ++ * @param pcd The PCD ++ * @param ep_desc Endpoint descriptor ++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint. ++ */ ++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep); ++ ++/** Disable the endpoint referenced by ep_handle. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error occurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** Queue a data transfer request on the endpoint referenced by ep_handle. ++ * After the transfer is completes, the complete callback will be called with ++ * the request status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf The buffer for the data ++ * @param dma_buf The DMA buffer for the data ++ * @param buflen The length of the data transfer ++ * @param zero Specifies whether to send zero length last packet. ++ * @param req_handle Set this handle to any value to use to reference this ++ * request in the ep_dequeue function or from the complete callback ++ * @param atomic_alloc If driver need to perform atomic allocations ++ * for internal data structures. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, void *req_handle, ++ int atomic_alloc); ++#ifdef DWC_UTE_PER_IO ++/** ++ * ++ * @param ereq_nonport Pointer to the extended request part of the ++ * usb_request structure defined in usb_gadget.h file. ++ */ ++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, ++ void *req_handle, int atomic_alloc, ++ void *ereq_nonport); ++ ++#endif ++ ++/** De-queue the specified data transfer that has not yet completed. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Halt (STALL) an endpoint or clear it. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); ++ ++/** This function */ ++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** This function should be called on every hardware interrupt */ ++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); ++ ++/** This function returns current frame number */ ++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); ++ ++/** ++ * Start isochronous transfers on the endpoint referenced by ep_handle. ++ * For isochronous transfers duble buffering is used. ++ * After processing each of buffers comlete callback will be called with ++ * status for each transaction. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf0 The virtual address of first data buffer ++ * @param buf1 The virtual address of second data buffer ++ * @param dma0 The DMA address of first data buffer ++ * @param dma1 The DMA address of second data buffer ++ * @param sync_frame Data pattern frame number ++ * @param dp_frame Data size for pattern frame ++ * @param data_per_frame Data size for regular frame ++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. ++ * @param buf_proc_intrvl Interval of ISOC Buffer processing ++ * @param req_handle Handle of ISOC request ++ * @param atomic_alloc Specefies whether to perform atomic allocation for ++ * internal data structures. ++ * ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. ++ * Returns -DW_E_SHUTDOWN for any other error. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, ++ dwc_dma_t dma0, dwc_dma_t dma1, ++ int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc); ++ ++/** Stop ISOC transfers on endpoint referenced by ep_handle. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param req_handle Handle of ISOC request ++ * ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function ++ * Returns 0 on success ++ */ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Get ISOC packet status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle Isochronoush request handle ++ * @param packet Number of packet ++ * @param status Out parameter for returning status ++ * @param actual Out parameter for returning actual length ++ * @param offset Out parameter for returning offset ++ * ++ */ ++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, ++ int *offset); ++ ++/** Get ISOC packet count. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle ++ */ ++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle); ++ ++/** This function starts the SRP Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ ++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ ++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); ++ ++/** Initiate SRP */ ++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); ++ ++/** Starts remote wakeup signaling. */ ++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); ++ ++/** Starts micorsecond soft disconnect. */ ++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs); ++/** This function returns whether device is dualspeed.*/ ++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); ++ ++/** This function returns whether device is otg. */ ++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); ++ ++/** These functions allow to get hnp parameters */ ++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); ++ ++/** CFI specific Interface functions */ ++/** Allocate a cfi buffer */ ++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, ++ dwc_dma_t * addr, size_t buflen, ++ int flags); ++ ++/******************************************************************************/ ++ ++/** @} */ ++ ++#endif /* __DWC_PCD_IF_H__ */ ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c +new file mode 100644 +index 000000000000..e55ea9c74be4 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c +@@ -0,0 +1,5148 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ ++ * $Revision: #116 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep); ++#endif ++//#define PRINT_CFI_DMA_DESCS ++ ++#define DEBUG_EP0 ++ ++/** ++ * This function updates OTG. ++ */ ++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) ++{ ++ ++ if (reset) { ++ pcd->b_hnp_enable = 0; ++ pcd->a_hnp_support = 0; ++ pcd->a_alt_hnp_support = 0; ++ } ++ ++ if (pcd->fops->hnp_changed) { ++ pcd->fops->hnp_changed(pcd); ++ } ++} ++ ++/** @file ++ * This file contains the implementation of the PCD Interrupt handlers. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * All interrupt registers are processed from LSB to MSB. ++ */ ++ ++/** ++ * This function prints the ep0 state for debug purposes. ++ */ ++static inline void print_ep0_state(dwc_otg_pcd_t * pcd) ++{ ++#ifdef DEBUG ++ char str[40]; ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ dwc_strcpy(str, "EP0_DISCONNECT"); ++ break; ++ case EP0_IDLE: ++ dwc_strcpy(str, "EP0_IDLE"); ++ break; ++ case EP0_IN_DATA_PHASE: ++ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); ++ break; ++ case EP0_OUT_DATA_PHASE: ++ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); ++ break; ++ case EP0_IN_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); ++ break; ++ case EP0_OUT_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); ++ break; ++ case EP0_STALL: ++ dwc_strcpy(str, "EP0_STALL"); ++ break; ++ default: ++ dwc_strcpy(str, "EP0_INVALID"); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); ++#endif ++} ++ ++/** ++ * This function calculate the size of the payload in the memory ++ * for out endpoints and prints size for debug purposes(used in ++ * 2.93a DevOutNak feature). ++ */ ++static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep) ++{ ++#ifdef DEBUG ++ deptsiz_data_t deptsiz_init = {.d32 = 0 }; ++ deptsiz_data_t deptsiz_updt = {.d32 = 0 }; ++ int pack_num; ++ unsigned payload; ++ ++ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num]; ++ deptsiz_updt.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ /* Payload will be */ ++ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize; ++ /* Packet count is decremented every time a packet ++ * is written to the RxFIFO not in to the external memory ++ * So, if payload == 0, then it means no packet was sent to ext memory*/ ++ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Payload for EP%d-%s\n", ++ ep->num, (ep->is_in ? "IN" : "OUT")); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered bytes = 0x%08x\n", payload); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered packets = %d\n", pack_num); ++#endif ++} ++ ++ ++#ifdef DWC_UTE_CFI ++static inline void print_desc(struct dwc_otg_dma_desc *ddesc, ++ const uint8_t * epname, int descnum) ++{ ++ CFI_INFO ++ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", ++ epname, descnum, ddesc->buf, ddesc->status.b.bytes, ++ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, ++ ddesc->status.b.bs); ++} ++#endif ++ ++/** ++ * This function returns pointer to in ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_in_eps; ++i) { ++ if (pcd->in_ep[i].dwc_ep.num == ep_num) ++ return &pcd->in_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This function returns pointer to out ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_out_eps; ++i) { ++ if (pcd->out_ep[i].dwc_ep.num == ep_num) ++ return &pcd->out_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This functions gets a pointer to an EP from the wIndex address ++ * value of the control request. ++ */ ++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t ep_num = UE_GET_ADDR(wIndex); ++ ++ if (ep_num == 0) { ++ ep = &pcd->ep0; ++ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ ++ ep = &pcd->in_ep[ep_num - 1]; ++ } else { ++ ep = &pcd->out_ep[ep_num - 1]; ++ } ++ ++ return ep; ++} ++ ++/** ++ * This function checks the EP request queue, if the queue is not ++ * empty the next request is started. ++ */ ++void start_next_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = 0; ++ uint32_t max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++#ifdef DWC_UTE_CFI ++ struct dwc_otg_pcd *pcd; ++ pcd = ep->pcd; ++#endif ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ ep->dwc_ep.cfi_req_len = req->length; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); ++ } else { ++#endif ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf) { ++ ep->dwc_ep.dma_addr = req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = req->dma; ++ ep->dwc_ep.start_xfer_buff = req->buf; ++ ep->dwc_ep.xfer_buff = req->buf; ++ } ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = req->length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE ++ - (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); ++ } ++ if (req->sent_zlp) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ DWC_PRINTF("There are no more ISOC requests \n"); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++} ++ ++/** ++ * This function handles the SOF Interrupts. At this time the SOF ++ * Interrupt is disabled. ++ */ ++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_PCD, "SOF\n"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Rx Status Queue Level Interrupt, which ++ * indicates that there is a least one packet in the Rx FIFO. The ++ * packets are moved from the FIFO to memory, where they will be ++ * processed when the Endpoint Interrupt Register indicates Transfer ++ * Complete or SETUP Phase Done. ++ * ++ * Repeat the following until the Rx Status Queue is empty: ++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet ++ * info ++ * -# If Receive FIFO is empty then skip to step Clear the interrupt ++ * and exit ++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the ++ * SETUP data to the buffer ++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data ++ * to the destination buffer ++ */ ++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t gintmask = {.d32 = 0 }; ++ device_grxsts_data_t status; ++ dwc_otg_pcd_ep_t *ep; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; ++#endif ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); ++ /* Disable the Rx Status Queue Level interrupt */ ++ gintmask.b.rxstsqlvl = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0); ++ ++ /* Get the Status from the top of the FIFO */ ++ status.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " ++ "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, ++ dpid_str[status.b.dpid], ++ status.b.pktsts, status.b.fn, status.b.fn); ++ /* Get pointer to EP structure */ ++ ep = get_out_ep(pcd, status.b.epnum); ++ ++ switch (status.b.pktsts) { ++ case DWC_DSTS_GOUT_NAK: ++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); ++ break; ++ case DWC_STS_DATA_UPDT: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); ++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { ++ /** @todo NGS Check for buffer overflow? */ ++ dwc_otg_read_packet(core_if, ++ ep->dwc_ep.xfer_buff, ++ status.b.bcnt); ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ ep->dwc_ep.xfer_buff += status.b.bcnt; ++ } ++ break; ++ case DWC_STS_XFER_COMP: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); ++ break; ++ case DWC_DSTS_SETUP_COMP: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); ++#endif ++ break; ++ case DWC_DSTS_SETUP_UPDT: ++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", ++ pcd->setup_pkt->req.bmRequestType, ++ pcd->setup_pkt->req.bRequest, ++ UGETW(pcd->setup_pkt->req.wValue), ++ UGETW(pcd->setup_pkt->req.wIndex), ++ UGETW(pcd->setup_pkt->req.wLength)); ++#endif ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ break; ++ default: ++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", ++ status.b.pktsts); ++ break; ++ } ++ ++ /* Enable the Rx Status Queue Level interrupt */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32); ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); ++ return 1; ++} ++ ++/** ++ * This function examines the Device IN Token Learning Queue to ++ * determine the EP number of the last IN token received. This ++ * implementation is for the Mass Storage device where there are only ++ * 2 IN EPs (Control-IN and BULK-IN). ++ * ++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there ++ * are 8 EP Numbers in each of the other possible DTKNQ Registers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * ++ */ ++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ int ndx = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ int epnum = 0; ++ ++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ /* Get the EP numbers */ ++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; ++ ndx = dtknqr1.b.intknwptr - 1; ++ ++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); ++ if (ndx == -1) { ++ /** @todo Find a simpler way to calculate the max ++ * queue position.*/ ++ int cnt = TOKEN_Q_DEPTH; ++ if (TOKEN_Q_DEPTH <= 6) { ++ cnt = TOKEN_Q_DEPTH - 1; ++ } else if (TOKEN_Q_DEPTH <= 14) { ++ cnt = TOKEN_Q_DEPTH - 7; ++ } else if (TOKEN_Q_DEPTH <= 22) { ++ cnt = TOKEN_Q_DEPTH - 15; ++ } else { ++ cnt = TOKEN_Q_DEPTH - 23; ++ } ++ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; ++ } else { ++ if (ndx <= 5) { ++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 13) { ++ ndx -= 6; ++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 21) { ++ ndx -= 14; ++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 29) { ++ ndx -= 22; ++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; ++ } ++ } ++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); ++ return epnum; ++} ++ ++/** ++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. ++ * The active request is checked for the next packet to be loaded into ++ * the non-periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ gnptxsts_data_t txstatus = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ int epnum = 0; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ /* Get the epnum from the IN Token Learning Queue. */ ++ epnum = get_ep_of_last_in_token(core_if); ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); ++ ++ while (txstatus.b.nptxqspcavail > 0 && ++ txstatus.b.nptxfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.nptxfempty = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when dedicated Tx FIFO Empty interrupt occurs. ++ * The active request is checked for the next packet to be loaded into ++ * apropriate Tx FIFO. ++ */ ++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && ++ ep->dwc_ep.xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when the Device is disconnected. It stops ++ * any active requests and informs the Gadget driver of the ++ * disconnect. ++ */ ++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) ++{ ++ int i, num_in_eps, num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_SPINLOCK(pcd->lock); ++ ++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); ++ /* don't disconnect drivers more than once */ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); ++ DWC_SPINUNLOCK(pcd->lock); ++ return; ++ } ++ pcd->ep0state = EP0_DISCONNECT; ++ ++ /* Reset the OTG state. */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Disable the NP Tx Fifo Empty Interrupt. */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Flush the FIFOs */ ++ /**@todo NGS Flush Periodic FIFOs */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); ++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ ep = &pcd->ep0; ++ dwc_otg_request_nuke(ep); ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_in_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_out_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (pcd->fops->disconnect) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->disconnect(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ DWC_SPINUNLOCK(pcd->lock); ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); ++ intr_mask.b.i2cintr = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.i2cintr = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++#if defined(VERBOSE) ++ DWC_PRINTF("Early Suspend Detected\n"); ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.erlysuspend = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function configures EPO to receive SETUP packets. ++ * ++ * @todo NGS: Update the comments from the HW FS. ++ * ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param pcd Programming view of the PCD. ++ */ ++static inline void ep0_out_start(dwc_otg_core_if_t * core_if, ++ dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++#endif ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ if (doepctl.b.epena) { ++ return; ++ } ++ } ++ ++ doeptsize0.b.supcnt = 3; ++ doeptsize0.b.pktcnt = 1; ++ doeptsize0.b.xfersize = 8 * 3; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ ++ /** @todo dma needs to handle multiple setup packets (up to 3) */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ pcd->setup_pkt_dma_handle); ++ } else { ++ dev_if->setup_desc_index = ++ (dev_if->setup_desc_index + 1) & 1; ++ dma_desc = ++ dev_if->setup_desc_addr[dev_if->setup_desc_index]; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.sr = 0; ++ dma_desc->status.b.mtrf = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; ++ dma_desc->buf = pcd->setup_pkt_dma_handle; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ dev_if->dma_setup_desc_addr ++ [dev_if->setup_desc_index]); ++ } ++ ++ } else { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ } ++ ++ /** DOEPCTL0 Register write cnak will be set after setup interrupt */ ++ doepctl.d32 = 0; ++ doepctl.b.epena = 1; ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32); ++ } ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++} ++ ++/** ++ * This interrupt occurs when a USB Reset is detected. When the USB ++ * Reset Interrupt occurs the device state is set to DEFAULT and the ++ * EP0 state is set to IDLE. ++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) ++ * -# Unmask the following interrupt bits ++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) ++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) ++ * - DOEPMSK.SETUP = 1 ++ * - DOEPMSK.XferCompl = 1 ++ * - DIEPMSK.XferCompl = 1 ++ * - DIEPMSK.TimeOut = 1 ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * At this point, all the required initialization, except for enabling ++ * the control 0 OUT endpoint is done, for receiving SETUP packets. ++ */ ++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ int i = 0; ++ gintsts_data_t gintsts; ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (power.b.stoppclk) { ++ power.d32 = 0; ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ } ++ ++ core_if->lx_state = DWC_OTG_L0; ++ ++ DWC_PRINTF("USB RESET\n"); ++#ifdef DWC_EN_ISOC ++ for (i = 1; i < 16; ++i) { ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ep = get_in_ep(pcd, i); ++ if (ep != 0) { ++ dwc_ep = &ep->dwc_ep; ++ dwc_ep->next_frame = 0xffffffff; ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /* reset the HNP settings */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ ++ /* Set NAK for all OUT EPs */ ++ doepctl.b.snak = 1; ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ } ++ ++ /* Flush the NP Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); ++ /* Flush the Learning Queue */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0], ++ doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ ++/* if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ diepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0], ++ diepmsk.d32); ++ } else { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); ++ } ++ ++ /* Reset Device Address */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.devaddr = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* setup EP0 to receive SETUP packets */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) ++ ep0_out_start(core_if, pcd); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbreset = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Get the device speed from the device status register and convert it ++ * to USB speed constant. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static int get_device_speed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ int speed = 0; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ speed = USB_SPEED_HIGH; ++ break; ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ speed = USB_SPEED_FULL; ++ break; ++ ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ speed = USB_SPEED_LOW; ++ break; ++ } ++ ++ return speed; ++} ++ ++/** ++ * Read the device status register and set the device speed in the ++ * data structure. ++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. ++ */ ++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ gintsts_data_t gintsts; ++ gusbcfg_data_t gusbcfg; ++ dwc_otg_core_global_regs_t *global_regs = ++ GET_CORE_IF(pcd)->core_global_regs; ++ uint8_t utmi16b, utmi8b; ++ int speed; ++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); ++ ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { ++ utmi16b = 6; //vahrama old value was 6; ++ utmi8b = 9; ++ } else { ++ utmi16b = 4; ++ utmi8b = 8; ++ } ++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++ ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ pcd->ep0state = EP0_IDLE; ++ } else if (pcd->ep0state == EP0_STALL) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ ++ pcd->ep0state = EP0_IDLE; ++ ++ ep0->stopped = 0; ++ ++ speed = get_device_speed(GET_CORE_IF(pcd)); ++ pcd->fops->connect(pcd, speed); ++ ++ /* Set USB turnaround time based on device speed and PHY interface. */ ++ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ if (speed == USB_SPEED_HIGH) { ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else if (GET_CORE_IF(pcd)->hwcfg4. ++ b.utmi_phy_data_width == 1) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 8) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { ++ /* UTMI+ OR ULPI interface */ ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } else { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 16) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ } ++ } ++ } else { ++ /* Full or low speed */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.enumdone = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the ISO OUT Packet was dropped due to ++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs ++ * read all the data from the Rx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_WARN("INTERRUPT Handler not implemented for %s\n", ++ "ISOC Out Dropped"); ++ ++ intr_mask.b.isooutdrop = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.isooutdrop = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates the end of the portion of the micro-frame ++ * for periodic transactions. If there is a periodic transaction for ++ * the next frame, load the packets into the EP periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); ++ ++ intr_mask.b.eopframe = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.eopframe = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that EP of the packet on the top of the ++ * non-periodic Tx FIFO does not match EP of the IN Token received. ++ * ++ * The "Device IN Token Queue" Registers are read to determine the ++ * order the IN Tokens have been received. The non-periodic Tx FIFO ++ * is flushed, so it can be reloaded in the order seen in the IN Token ++ * Queue. ++ */ ++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 1; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (!gintsts.b.ginnakeff) { ++ /* Disable EP Mismatch interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ /* Set the global non-periodic IN NAK handshake */ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dctl.b.sgnpinnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } else { ++ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n"); ++ } ++ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective() ++ * handler after Global IN NAK Effective interrupt will be asserted */ ++ } ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.epmismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt is valid only in DMA mode. This interrupt indicates that the ++ * core has stopped fetching data for IN endpoints due to the unavailability of ++ * TxFIFO space or Request Queue space. This interrupt is used by the ++ * application for an endpoint mismatch algorithm. ++ * ++ * @param pcd The PCD ++ */ ++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk_data; ++ dctl_data_t dctl; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Mask GINTSTS.FETSUSP interrupt */ ++ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gintmsk_data.b.fetsusp = 0; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.fetsusp = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++/** ++ * This funcion stalls EP0. ++ */ ++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ usb_device_request_t *ctrl = &pcd->setup_pkt->req; ++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", ++ ctrl->bmRequestType, ctrl->bRequest, err_val); ++ ++ ep0->dwc_ep.is_in = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ pcd->ep0.stopped = 1; ++ pcd->ep0state = EP0_IDLE; ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This functions delegates the setup command to the gadget driver. ++ */ ++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, ++ usb_device_request_t * ctrl) ++{ ++ int ret = 0; ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ } ++ ++ /** @todo This is a g_file_storage gadget driver specific ++ * workaround: a DELAYED_STATUS result from the fsg_setup ++ * routine will result in the gadget queueing a EP0 IN status ++ * phase for a two-stage control transfer. Exactly the same as ++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class ++ * specific request. Need a generic way to know when the gadget ++ * driver will queue the status phase. Can we assume when we ++ * call the gadget driver setup() function that it will always ++ * queue and require the following flag? Need to look into ++ * this. ++ */ ++ ++ if (ret == 256 + 999) { ++ pcd->request_config = 1; ++ } ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This functions delegates the CFI setup commands to the gadget driver. ++ * This function will return a negative value to indicate a failure. ++ */ ++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int ret = 0; ++ ++ if (pcd->fops && pcd->fops->cfi_setup) { ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->cfi_setup(pcd, ctrl_req); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ return ret; ++ } ++ } ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function starts the Zero-Length Packet for the IN status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ return; ++ } ++ ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ ++ /* Prepare for more SETUP Packets */ ++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); ++ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) ++ && (pcd->core_if->dma_desc_enable) ++ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Data terminated wait next packet in out_desc_addr\n"); ++ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr); ++ pcd->data_terminated = 1; ++ } ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 1; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ //ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the OUT status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); ++ return; ++ } ++ pcd->ep0state = EP0_OUT_STATUS_PHASE; ++ ++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 0; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ if (GET_CORE_IF(pcd)->dma_enable == 0) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++} ++ ++/** ++ * Clear the EP halt (STALL) and if pending requests start the ++ * transfer. ++ */ ++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ if (ep->dwc_ep.stall_clear_flag == 0) ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++ /* Reactive the EP */ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (ep->stopped) { ++ ep->stopped = 0; ++ /* If there is a request in the EP queue start it */ ++ ++ /** @todo FIXME: this causes an EP mismatch in DMA mode. ++ * epmismatch not yet implemented. */ ++ ++ /* ++ * Above fixme is solved by implmenting a tasklet to call the ++ * start_next_request(), outside of interrupt context at some ++ * time after the current time, after a clear-halt setup packet. ++ * Still need to implement ep mismatch in the future if a gadget ++ * ever uses more than one endpoint at once ++ */ ++ ep->queue_sof = 1; ++ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); ++ } ++ /* Start Control Status Phase */ ++ do_setup_in_status_phase(pcd); ++} ++ ++/** ++ * This function is called when the SET_FEATURE TEST_MODE Setup packet ++ * is sent from the host. The Device Control register is written with ++ * the Test Mode bits set to the specified Test Mode. This is done as ++ * a tasklet so that the "Status" phase of the control transfer ++ * completes before transmitting the TEST packets. ++ * ++ * @todo This has not been tested since the tasklet struct was put ++ * into the PCD struct! ++ * ++ */ ++void do_test_mode(void *data) ++{ ++ dctl_data_t dctl; ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int test_mode = pcd->test_mode; ++ ++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ switch (test_mode) { ++ case 1: // TEST_J ++ dctl.b.tstctl = 1; ++ break; ++ ++ case 2: // TEST_K ++ dctl.b.tstctl = 2; ++ break; ++ ++ case 3: // TEST_SE0_NAK ++ dctl.b.tstctl = 3; ++ break; ++ ++ case 4: // TEST_PACKET ++ dctl.b.tstctl = 4; ++ break; ++ ++ case 5: // TEST_FORCE_ENABLE ++ dctl.b.tstctl = 5; ++ break; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++} ++ ++/** ++ * This function process the GET_STATUS Setup Commands. ++ */ ++static inline void do_get_status(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ uint16_t *status = pcd->status_buf; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */ ++ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex)); ++ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver); ++ DWC_PRINTF("OTG CAP - %d, %d\n", ++ core_if->core_params->otg_cap, ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ if (core_if->otg_ver == 1 ++ && core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ uint8_t *otgsts = (uint8_t*)pcd->status_buf; ++ *otgsts = (core_if->otg_sts & 0x1); ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = ++ (uint8_t *) otgsts; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts; ++ ep0->dwc_ep.dma_addr = ++ pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 1; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ return; ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ } else { ++ *status = 0x1; /* Self powered */ ++ *status |= pcd->remote_wakeup_enable << 1; ++ break; ++ } ++ case UT_INTERFACE: ++ *status = 0; ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0 || UGETW(ctrl.wLength) > 2) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ /** @todo check for EP stall */ ++ *status = ep->stopped; ++ break; ++ } ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 2; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++} ++ ++/** ++ * This function process the SET_FEATURE Setup Commands. ++ */ ++static inline void do_set_feature(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 1; ++ break; ++ ++ case UF_TEST_MODE: ++ /* Setup the Test Mode tasklet to do the Test ++ * Packet generation after the SETUP Status ++ * phase has completed. */ ++ ++ /** @todo This has not been tested since the ++ * tasklet struct was put into the PCD ++ * struct! */ ++ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; ++ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); ++ break; ++ ++ case UF_DEVICE_B_HNP_ENABLE: ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); ++ ++ /* dev may initiate HNP */ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->b_hnp_enable = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); ++ /**@todo Is the gotgctl.devhnpen cleared ++ * by a USB Reset? */ ++ gotgctl.b.devhnpen = 1; ++ gotgctl.b.hnpreq = 1; ++ DWC_WRITE_REG32(&global_regs->gotgctl, ++ gotgctl.d32); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_HNP_SUPPORT: ++ /* RH port supports HNP */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_ALT_HNP_SUPPORT: ++ /* other RH port does */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_alt_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_INTERFACE: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UT_ENDPOINT: ++ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ } ++} ++ ++/** ++ * This function process the CLEAR_FEATURE Setup Commands. ++ */ ++static inline void do_clear_feature(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 0; ++ break; ++ ++ case UF_TEST_MODE: ++ /** @todo Add CLEAR_FEATURE for TEST modes. */ ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ++ pcd_clear_halt(pcd, ep); ++ ++ break; ++ } ++} ++ ++/** ++ * This function process the SET_ADDRESS Setup Commands. ++ */ ++static inline void do_set_address(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ ++ if (ctrl.bmRequestType == UT_DEVICE) { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ ++#ifdef DEBUG_EP0 ++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); ++#endif ++ dcfg.b.devaddr = UGETW(ctrl.wValue); ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); ++ do_setup_in_status_phase(pcd); ++ } ++} ++ ++/** ++ * This function processes SETUP commands. In Linux, the USB Command ++ * processing is done in two places - the first being the PCD and the ++ * second in the Gadget Driver (for example, the File-Backed Storage ++ * Gadget Driver). ++ * ++ *
Parameter NameMeaning
otg_capSpecifies the OTG capabilities. The driver will automatically detect the ++ value for this parameter if none is specified. ++ - 0: HNP and SRP capable (default, if available) ++ - 1: SRP Only capable ++ - 2: No HNP/SRP capable ++
dma_enableSpecifies whether to use slave or DMA mode for accessing the data FIFOs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Slave ++ - 1: DMA (default, if available) ++
dma_burst_sizeThe DMA Burst size (applicable only for External DMA Mode). ++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++
speedSpecifies the maximum speed of operation in host and device mode. The ++ actual speed depends on the speed of the attached device and the value of ++ phy_type. ++ - 0: High Speed (default) ++ - 1: Full Speed ++
host_support_fs_ls_low_powerSpecifies whether low power mode is supported when attached to a Full ++ Speed or Low Speed device in host mode. ++ - 0: Don't support low power mode (default) ++ - 1: Support low power mode ++
host_ls_low_power_phy_clkSpecifies the PHY clock rate in low power mode when connected to a Low ++ Speed device in host mode. This parameter is applicable only if ++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. ++ - 0: 48 MHz (default) ++ - 1: 6 MHz ++
enable_dynamic_fifo Specifies whether FIFOs may be resized by the driver software. ++ - 0: Use cC FIFO size parameters ++ - 1: Allow dynamic FIFO sizing (default) ++
data_fifo_sizeTotal number of 4-byte words in the data FIFO memory. This memory ++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. ++ - Values: 32 to 32768 (default 8192) ++ ++ Note: The total FIFO memory depth in the FPGA configuration is 8192. ++
dev_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in device mode when dynamic ++ FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1064) ++
dev_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in device mode when ++ dynamic FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
dev_perio_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the periodic Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
host_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in host mode when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
host_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in host mode when ++ dynamic FIFO sizing is enabled in the core. ++ - Values: 16 to 32768 (default 1024) ++
host_perio_tx_fifo_sizeNumber of 4-byte words in the host periodic Tx FIFO when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
max_transfer_sizeThe maximum transfer size supported in bytes. ++ - Values: 2047 to 65,535 (default 65,535) ++
max_packet_countThe maximum number of packets in a transfer. ++ - Values: 15 to 511 (default 511) ++
host_channelsThe number of host channel registers to use. ++ - Values: 1 to 16 (default 12) ++ ++ Note: The FPGA configuration supports a maximum of 12 host channels. ++
dev_endpointsThe number of endpoints in addition to EP0 available for device mode ++ operations. ++ - Values: 1 to 15 (default 6 IN and OUT) ++ ++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in ++ addition to EP0. ++
phy_typeSpecifies the type of PHY interface to use. By default, the driver will ++ automatically detect the phy_type. ++ - 0: Full Speed ++ - 1: UTMI+ (default, if available) ++ - 2: ULPI ++
phy_utmi_widthSpecifies the UTMI+ Data Width. This parameter is applicable for a ++ phy_type of UTMI+. Also, this parameter is applicable only if the ++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the ++ core has been configured to work at either data path width. ++ - Values: 8 or 16 bits (default 16) ++
phy_ulpi_ddrSpecifies whether the ULPI operates at double or single data rate. This ++ parameter is only applicable if phy_type is ULPI. ++ - 0: single data rate ULPI interface with 8 bit wide data bus (default) ++ - 1: double data rate ULPI interface with 4 bit wide data bus ++
i2c_enableSpecifies whether to use the I2C interface for full speed PHY. This ++ parameter is only applicable if PHY_TYPE is FS. ++ - 0: Disabled (default) ++ - 1: Enabled ++
ulpi_fs_lsSpecifies whether to use ULPI FS/LS mode only. ++ - 0: Disabled (default) ++ - 1: Enabled ++
ts_dlineSpecifies whether term select D-Line pulsing for all PHYs is enabled. ++ - 0: Disabled (default) ++ - 1: Enabled ++
en_multiple_tx_fifoSpecifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Disabled ++ - 1: Enabled (default, if available) ++
dev_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
tx_thr_lengthTransmit Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
rx_thr_lengthReceive Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
thr_ctlSpecifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of ++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and ++ Rx transfers accordingly. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - Values: 0 to 7 (default 0) ++ Bit values indicate: ++ - 0: Thresholding disabled ++ - 1: Thresholding enabled ++
dma_desc_enableSpecifies whether to enable Descriptor DMA mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Descriptor DMA disabled ++ - 1: Descriptor DMA (default, if available) ++
mpi_enableSpecifies whether to enable MPI enhancement mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: MPI disabled (default) ++ - 1: MPI enable ++
pti_enableSpecifies whether to enable PTI enhancement support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: PTI disabled (default) ++ - 1: PTI enable ++
lpm_enableSpecifies whether to enable LPM support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: LPM disabled ++ - 1: LPM enable (default, if available) ++
ic_usb_capSpecifies whether to enable IC_USB capability. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: IC_USB disabled (default, if available) ++ - 1: IC_USB enable ++
ahb_thr_ratioSpecifies AHB Threshold ratio. ++ - Values: 0 to 3 (default 0) ++
power_downSpecifies Power Down(Hibernation) Mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Power Down disabled (default) ++ - 2: Power Down enabled ++
reload_ctlSpecifies whether dynamic reloading of the HFIR register is allowed during ++ run time. The driver will automatically detect the value for this parameter if ++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0 ++ the core might misbehave. ++ - 0: Reload Control disabled (default) ++ - 1: Reload Control enabled ++
dev_out_nakSpecifies whether Device OUT NAK enhancement enabled or no. ++ The driver will automatically detect the value for this parameter if ++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++ - 0: The core does not set NAK after Bulk OUT transfer complete (default) ++ - 1: The core sets NAK after Bulk OUT transfer complete ++
cont_on_bnaSpecifies whether Enable Continue on BNA enabled or no. ++ After receiving BNA interrupt the core disables the endpoint,when the ++ endpoint is re-enabled by the application the ++ - 0: Core starts processing from the DOEPDMA descriptor (default) ++ - 1: Core starts processing from the descriptor which received the BNA. ++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++
ahb_singleThis bit when programmed supports SINGLE transfers for remainder data ++ in a transfer for DMA mode of operation. ++ - 0: The remainder data will be sent using INCR burst size (default) ++ - 1: The remainder data will be sent using SINGLE burst size. ++
adp_enableSpecifies whether ADP feature is enabled. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: ADP feature disabled (default) ++ - 1: ADP feature enabled ++
otg_verSpecifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3 ++ USB OTG device. ++ - 0: OTG 2.0 support disabled (default) ++ - 1: OTG 2.0 support enabled ++
++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ *
Command Driver Description
GET_STATUS PCD Command is processed as ++ * defined in chapter 9 of the USB 2.0 Specification chapter 9 ++ *
CLEAR_FEATURE PCD The Device and Endpoint ++ * requests are the ENDPOINT_HALT feature is procesed, all others the ++ * interface requests are ignored.
SET_FEATURE PCD The Device and Endpoint ++ * requests are processed by the PCD. Interface requests are passed ++ * to the Gadget Driver.
SET_ADDRESS PCD Program the DCFG reg, ++ * with device address received
GET_DESCRIPTOR Gadget Driver Return the ++ * requested descriptor
SET_DESCRIPTOR Gadget Driver Optional - ++ * not implemented by any of the existing Gadget Drivers.
SET_CONFIGURATION Gadget Driver Disable ++ * all EPs and enable EPs for new configuration.
GET_CONFIGURATION Gadget Driver Return ++ * the current configuration
SET_INTERFACE Gadget Driver Disable all ++ * EPs and enable EPs for new configuration.
GET_INTERFACE Gadget Driver Return the ++ * current interface.
SYNC_FRAME PCD Display debug ++ * message.
++ * ++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are ++ * processed by pcd_setup. Calling the Function Driver's setup function from ++ * pcd_setup processes the gadget SETUP commands. ++ */ ++static inline void pcd_setup(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ ++#ifdef DWC_UTE_CFI ++ int retval = 0; ++ struct cfi_usb_ctrlrequest cfi_req; ++#endif ++ ++ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz); ++ ++ /** In BDMA more then 1 setup packet is not supported till 3.00a */ ++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 ++ && (doeptsize0.b.supcnt < 2) ++ && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ DWC_ERROR ++ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); ++ } ++ if ((core_if->snpsid >= OTG_CORE_REV_3_00a) ++ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) { ++ ctrl = ++ (pcd->setup_pkt + ++ (3 - doeptsize0.b.supcnt - 1 + ++ ep0->dwc_ep.stp_rollover))->req; ++ } ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ /* Clean up the request queue */ ++ dwc_otg_request_nuke(ep0); ++ ep0->stopped = 0; ++ ++ if (ctrl.bmRequestType & UE_DIR_IN) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_DATA_PHASE; ++ } else { ++ ep0->dwc_ep.is_in = 0; ++ pcd->ep0state = EP0_OUT_DATA_PHASE; ++ } ++ ++ if (UGETW(ctrl.wLength) == 0) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ ++ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { ++ ++#ifdef DWC_UTE_CFI ++ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); ++ ++ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", ++ ctrl.bRequestType, ctrl.bRequest); ++ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { ++ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { ++ retval = cfi_setup(pcd, &cfi_req); ++ if (retval < 0) { ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return; ++ } ++ ++ /* if need gadget setup then call it and check the retval */ ++ if (pcd->cfi->need_gadget_att) { ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd-> ++ cfi->ctrl_req); ++ if (retval < 0) { ++ pcd->ep0_pending = 0; ++ return; ++ } ++ } ++ ++ if (pcd->cfi->need_status_in_complete) { ++ do_setup_in_status_phase(pcd); ++ } ++ return; ++ } ++ } ++#endif ++ ++ /* handle non-standard (class/vendor) requests in the gadget driver */ ++ do_gadget_setup(pcd, &ctrl); ++ return; ++ } ++ ++ /** @todo NGS: Handle bad setup packet? */ ++ ++/////////////////////////////////////////// ++//// --- Standard Request handling --- //// ++ ++ switch (ctrl.bRequest) { ++ case UR_GET_STATUS: ++ do_get_status(pcd); ++ break; ++ ++ case UR_CLEAR_FEATURE: ++ do_clear_feature(pcd); ++ break; ++ ++ case UR_SET_FEATURE: ++ do_set_feature(pcd); ++ break; ++ ++ case UR_SET_ADDRESS: ++ do_set_address(pcd); ++ break; ++ ++ case UR_SET_INTERFACE: ++ case UR_SET_CONFIG: ++// _pcd->request_config = 1; /* Configuration changed */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UR_SYNCH_FRAME: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ default: ++ /* Call the Gadget Driver's setup functions */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ } ++} ++ ++/** ++ * This function completes the ep0 control transfer. ++ */ ++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++#ifdef DEBUG_EP0 ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++#endif ++ deptsiz0_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req; ++ int is_last = 0; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ ++#ifdef DWC_UTE_CFI ++ struct cfi_usb_ctrlrequest *ctrlreq; ++ int retval = -DWC_E_NOT_SUPPORTED; ++#endif ++ ++ desc_sts.b.bytes = 0; ++ ++ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ if (ep->dwc_ep.is_in) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); ++#endif ++ do_setup_out_status_phase(pcd); ++ } else { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); ++#endif ++ ++#ifdef DWC_UTE_CFI ++ ctrlreq = &pcd->cfi->ctrl_req; ++ ++ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { ++ if (ctrlreq->bRequest > 0xB0 ++ && ctrlreq->bRequest < 0xBF) { ++ ++ /* Return if the PCD failed to handle the request */ ++ if ((retval = ++ pcd->cfi->ops. ++ ctrl_write_complete(pcd->cfi, ++ pcd)) < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the PCD(%d)\n", ++ retval); ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ ++ /* If the gadget needs to be notified on the request */ ++ if (pcd->cfi->need_gadget_att == 1) { ++ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd->cfi-> ++ ctrl_req); ++ ++ /* Return from the function if the gadget failed to process ++ * the request properly - this should never happen !!! ++ */ ++ if (retval < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the gadget(%d)\n", ++ retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ } ++ ++ CFI_INFO("%s: RETVAL=%d\n", __func__, ++ retval); ++ /* If we hit here then the PCD and the gadget has properly ++ * handled the request - so send the ZLP IN to the host. ++ */ ++ /* @todo: MAS - decide whether we need to start the setup ++ * stage based on the need_setup value of the cfi object ++ */ ++ do_setup_in_status_phase(pcd); ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ } ++#endif ++ ++ do_setup_in_status_phase(pcd); ++ } ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ return 0; ++ } ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ is_last = 1; ++ } else if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ if (core_if->dma_desc_enable != 0) ++ desc_sts = dev_if->in_desc_addr->status; ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ ++ if (((core_if->dma_desc_enable == 0) ++ && (deptsiz.b.xfersize == 0)) ++ || ((core_if->dma_desc_enable != 0) ++ && (desc_sts.b.bytes == 0))) { ++ req->actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ do_setup_out_status_phase(pcd); ++ } ++ } else { ++ /* ep0-OUT */ ++#ifdef DEBUG_EP0 ++ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++ ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ /* For older cores do setup in status phase in Slave/BDMA modes, ++ * starting from 3.00 do that only in slave, and for DMA modes ++ * just re-enable ep 0 OUT here*/ ++ if (core_if->dma_enable == 0 ++ || (core_if->dma_desc_enable == 0 ++ && core_if->snpsid <= OTG_CORE_REV_2_94a)) { ++ do_setup_in_status_phase(pcd); ++ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Enable out ep before in status phase\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ dwc_otg_request_done(ep, req, 0); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ return 1; ++ } ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This function calculates traverses all the CFI DMA descriptors and ++ * and accumulates the bytes that are left to be transfered. ++ * ++ * @return The total bytes left to transfered, or a negative value as failure ++ */ ++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) ++{ ++ int32_t ret = 0; ++ int i; ++ struct dwc_otg_dma_desc *ddesc = NULL; ++ struct cfi_ep *cfiep; ++ ++ /* See if the pcd_ep has its respective cfi_ep mapped */ ++ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); ++ if (!cfiep) { ++ CFI_INFO("%s: Failed to find ep\n", __func__); ++ return -1; ++ } ++ ++ ddesc = ep->dwc_ep.descs; ++ ++ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { ++ ++#if defined(PRINT_CFI_DMA_DESCS) ++ print_desc(ddesc, ep->ep.name, i); ++#endif ++ ret += ddesc->status.b.bytes; ++ ddesc++; ++ } ++ ++ if (ret) ++ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, ++ ret); ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function completes the request for the EP. If there are ++ * additional requests for the EP in the queue they will be started. ++ */ ++static void complete_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ struct device *dev = dwc_otg_pcd_to_dev(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++ deptsiz_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req = 0; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t byte_count = 0; ++ int is_last = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT")); ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); ++ ++ if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (deptsiz.b.xfersize == 0 ++ && deptsiz.b.pktcnt == 0) { ++ byte_count = ++ ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count; ++ ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep. ++ is_in ? "IN" : "OUT"), ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ if (ep->dwc_ep.xfer_len < ++ ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ if (ep->dwc_ep.type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ req->actual = 0; ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } else ++ DWC_WARN ++ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ } ++ } else { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ ++ byte_count = residue; ++ } else { ++#endif ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (byte_count == 0) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len; ++ is_last = 1; ++ } else { ++ DWC_WARN("Incomplete transfer\n"); ++ } ++ } ++ } else { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN ++ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++ desc_sts.d32 = 0; ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ byte_count = residue; ++ } else { ++#endif ++ ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ /* Checking for interrupt Out transfers with not ++ * dword aligned mps sizes ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR && ++ (ep->dwc_ep.maxpacket%4)) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count; ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket) ++ && (ep->dwc_ep.xfer_len / ++ ep->dwc_ep.maxpacket < ++ MAX_DMA_DESC_CNT)) ++ ep->dwc_ep.xfer_len -= ++ (ep->dwc_ep.desc_cnt - ++ 1) * ep->dwc_ep.maxpacket + ++ ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket; ++ else ++ ep->dwc_ep.xfer_len -= ++ ep->dwc_ep.desc_cnt * ++ ep->dwc_ep.maxpacket; ++ if (ep->dwc_ep.xfer_len > 0) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count + ++ ((4 - ++ (ep->dwc_ep. ++ total_len & 0x3)) & 0x3); ++ is_last = 1; ++ } ++ } else { ++ deptsiz.d32 = 0; ++ deptsiz.d32 = ++ DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ ++ byte_count = (ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count - ++ deptsiz.b.xfersize); ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ } else { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", ++ &out_ep_regs->doeptsiz, ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ req->actual = ep->dwc_ep.cfi_req_len - byte_count; ++ } else { ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (req->dw_align_buf) { ++ if (!ep->dwc_ep.is_in) { ++ dwc_memcpy(req->buf, req->dw_align_buf, req->length); ++ } ++ DWC_DMA_FREE(dev, req->length, req->dw_align_buf, ++ req->dw_align_buf_dma); ++ } ++ ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function BNA interrupt for Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ int i; ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); ++ ++ if (dwc_ep->is_in) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_in.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_out.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep-> ++ num]->doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++} ++ ++/** ++ * This function sets latest iso packet information(non-PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ dma_addr_t dma_addr; ++ uint32_t offset; ++ ++ if (ep->proc_buf_num) ++ dma_addr = ep->dma_addr1; ++ else ++ dma_addr = ep->dma_addr0; ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[ep->num]->dieptsiz); ++ offset = ep->data_per_frame; ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ offset = ++ ep->data_per_frame + ++ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = 0; ++ } else { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; ++ } ++ ep->cur_pkt_addr += offset; ++ ep->cur_pkt_dma_addr += offset; ++ ep->cur_pkt++; ++} ++ ++/** ++ * This function sets latest iso packet information(DDMA mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ iso_pkt_info_t *iso_packet; ++ uint32_t data_per_desc; ++ uint32_t offset; ++ int i, j; ++ ++ iso_packet = dwc_ep->pkt_info; ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ offset = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes + (4 - ++ dwc_ep->data_per_frame ++ % 4); ++ } ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ iso_packet++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ iso_packet++; ++ dma_desc++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso packet descriptor */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + ++ (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ ++ } ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ ++ dma_desc++; ++ iso_packet++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ while (sts.b_iso_in.bs == BS_DMA_BUSY) { ++ sts.d32 = dma_desc->status.d32; ++ } ++ ++ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ } ++} ++ ++/** ++ * This function reinitialize DMA Descriptors for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ int i, j; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dma_addr_t dma_ad; ++ volatile uint32_t *addr; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ uint32_t data_per_desc; ++ ++ if (dwc_ep->is_in == 0) { ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } else { ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ ++ if (dwc_ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr1; ++ } ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_ad += data_per_desc; ++ dma_desc++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = dwc_ep->proc_buf_num; ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ sts.b_iso_in.framenum = dwc_ep->next_frame; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ dma_ad += dwc_ep->data_per_frame; ++ dma_desc++; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = dwc_ep->proc_buf_num; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = ++ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; ++ } ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * in case Iso out packet was dropped ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP for wihich transfer complete was asserted ++ * ++ */ ++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ uint32_t dma_addr; ++ uint32_t drp_pkt; ++ uint32_t drp_pkt_cnt; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ int i; ++ ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doeptsiz); ++ ++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; ++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); ++ ++ /* Setting dropped packets status */ ++ for (i = 0; i < drp_pkt_cnt; ++i) { ++ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; ++ drp_pkt++; ++ deptsiz.b.pktcnt--; ++ } ++ ++ if (deptsiz.b.pktcnt > 0) { ++ deptsiz.b.xfersize = ++ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - ++ deptsiz.b.pktcnt) * dwc_ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 0; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, ++ deptsiz.d32); ++ ++ if (deptsiz.b.pktcnt > 0) { ++ if (dwc_ep->proc_buf_num) { ++ dma_addr = ++ dwc_ep->dma_addr1 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize; ++ } else { ++ dma_addr = ++ dwc_ep->dma_addr0 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize;; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepdma, dma_addr); ++ ++ /** Re-enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32, ++ depctl.d32); ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function sets iso packets information(PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ int i, j; ++ dma_addr_t dma_ad; ++ iso_pkt_info_t *packet_info = ep->pkt_info; ++ uint32_t offset; ++ uint32_t frame_data; ++ deptsiz_data_t deptsiz; ++ ++ if (ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = ep->dma_addr1; ++ } ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz); ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ offset = 0; ++ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { ++ frame_data = ep->data_per_frame; ++ for (j = 0; j < ep->pkt_per_frm; ++j) { ++ ++ /* Packet status - is not set as initially ++ * it is set to 0 and if packet was sent ++ successfully, status field will remain 0*/ ++ ++ /* Bytes has been transfered */ ++ packet_info->length = ++ (ep->maxpacket < ++ frame_data) ? ep->maxpacket : frame_data; ++ ++ /* Received packet offset */ ++ packet_info->offset = offset; ++ offset += packet_info->length; ++ frame_data -= packet_info->length; ++ ++ packet_info++; ++ } ++ } ++ return 1; ++ } else { ++ /* This is a workaround for in case of Transfer Complete with ++ * PktDrpSts interrupts merging - in this case Transfer complete ++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts ++ * set and with DOEPTSIZ register non zero. Investigations showed, ++ * that this happens when Out packet is dropped, but because of ++ * interrupts merging during first interrupt handling PktDrpSts ++ * bit is cleared and for next merged interrupts it is not reset. ++ * In this case SW hadles the interrupt as if PktDrpSts bit is set. ++ */ ++ if (ep->is_in) { ++ return 1; ++ } else { ++ return handle_iso_out_pkt_dropped(core_if, ep); ++ } ++ } ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * ++ * @param pcd The PCD ++ * @param ep The EP for which transfer complete was asserted ++ * ++ */ ++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ uint8_t is_last = 0; ++ ++ if (ep->dwc_ep.next_frame == 0xffffffff) { ++ DWC_WARN("Next frame is not set!\n"); ++ return; ++ } ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ set_ddma_iso_pkts_info(core_if, dwc_ep); ++ reinit_ddma_iso_xfer(core_if, dwc_ep); ++ is_last = 1; ++ } else { ++ if (core_if->pti_enh_enable) { ++ if (set_iso_pkts_info(core_if, dwc_ep)) { ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ dwc_otg_iso_ep_start_buf_transfer ++ (core_if, dwc_ep); ++ is_last = 1; ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ++ dwc_ep); ++ } ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ if (is_last) ++ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); ++} ++#endif /* DWC_EN_ISOC */ ++ ++/** ++ * This function handle BNA interrupt for Non Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = ep->pcd->core_if; ++ int i, start; ++ ++ if (!dwc_ep->desc_cnt) ++ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num, ++ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt); ++ ++ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in ++ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) { ++ uint32_t doepdma; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ doepdma = DWC_READ_REG32(&(out_regs->doepdma)); ++ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t); ++ dma_desc = &(dwc_ep->desc_addr[start]); ++ } else { ++ start = 0; ++ dma_desc = dwc_ep->desc_addr; ++ } ++ ++ ++ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++} ++ ++/** ++ * This function handles EP0 Control transfers. ++ * ++ * The state of the control transfers are tracked in ++ * ep0state. ++ */ ++static void handle_ep0(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ dev_dma_desc_sts_t desc_sts; ++ deptsiz0_data_t deptsiz; ++ uint32_t byte_count; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ print_ep0_state(pcd); ++#endif ++ ++// DWC_PRINTF("HANDLE EP0\n"); ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ break; ++ ++ case EP0_IDLE: ++ pcd->request_config = 0; ++ ++ pcd_setup(pcd); ++ break; ++ ++ case EP0_IN_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ ++ if (core_if->dma_enable != 0) { ++ /* ++ * For EP0 we can only program 1 packet at a time so we ++ * need to do the make calculations after each complete. ++ * Call write_packet to make the calculations, as in ++ * slave mode, and use those values to determine if we ++ * can complete. ++ */ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[0]-> ++ dieptsiz); ++ byte_count = ++ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->in_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ if (core_if->dma_enable != 0) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->out_ep_regs[0]-> ++ doeptsiz); ++ byte_count = ++ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->out_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ case EP0_OUT_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); ++ ep0_complete_request(ep0); ++ pcd->ep0state = EP0_IDLE; ++ ep0->stopped = 1; ++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ ++ ++ /* Prepare for more SETUP Packets */ ++ if (core_if->dma_enable) { ++ ep0_out_start(core_if, pcd); ++ } ++ break; ++ ++ case EP0_STALL: ++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); ++ break; ++ } ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++} ++ ++/** ++ * Restart transfer ++ */ ++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if; ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++#ifdef DWC_EN_ISOC ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ return; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" ++ " stopped=%d\n", ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); ++ /* ++ * If xfersize is 0 and pktcnt in not 0, resend the last packet. ++ */ ++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && ++ ep->dwc_ep.start_xfer_buff != 0) { ++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } else { ++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; ++ /* convert packet size to dwords. */ ++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ ep->stopped = 0; ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " ++ "xfer_len=%0x stopped=%d\n", ++ ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ++ ep->stopped); ++ if (epnum == 0) { ++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); ++ } else { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ } ++} ++ ++/* ++ * This function create new nextep sequnce based on Learn Queue. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void predict_nextep_seq( dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ uint8_t seqnum[MAX_EPS_CHANNELS]; ++ uint8_t intkn_seq[TOKEN_Q_DEPTH]; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint8_t temp; ++ int ndx = 0; ++ int start = 0; ++ int end = 0; ++ int sort_done = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ ++ ++ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ if (dtknqr1.b.wrap_bit) { ++ ndx = dtknqr1.b.intknwptr; ++ end = ndx -1; ++ if (end < 0) ++ end = TOKEN_Q_DEPTH -1; ++ } else { ++ ndx = 0; ++ end = dtknqr1.b.intknwptr -1; ++ if (end < 0) ++ end = 0; ++ } ++ start = ndx; ++ ++ /* Fill seqnum[] by initial values: EP number + 31 */ ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ seqnum[i] = i +31; ++ } ++ ++ /* Fill intkn_seq[] from in_tkn_epnums[0] */ ++ for (i=0; i < 6; i++) ++ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf; ++ ++ if (TOKEN_Q_DEPTH > 6) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=6; i < 14; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 14) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=14; i < 22; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 22) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=22; i < 30; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__, ++ start, end); ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == 0xff ) ++ seqnum[i] = 0xff; ++ } ++ ++ /* Sort seqnum[] */ ++ sort_done = 0; ++ while (!sort_done) { ++ sort_done = 1; ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (seqnum[i] > seqnum[i+1]) { ++ temp = seqnum[i]; ++ seqnum[i] = seqnum[i+1]; ++ seqnum[i+1] = temp; ++ sort_done = 0; ++ } ++ } ++ } ++ ++ ndx = start + seqnum[0]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ core_if->first_in_nextep_seq = intkn_seq[ndx]; ++ ++ /* Update seqnum[] by EP numbers */ ++ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { ++ ndx = start + i; ++ if (seqnum[i] < 31) { ++ ndx = start + seqnum[i]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ seqnum[i] = intkn_seq[ndx]; ++ } else { ++ if (seqnum[i] < 0xff) { ++ seqnum[i] = seqnum[i] - 31; ++ } else { ++ break; ++ } ++ } ++ } ++ ++ /* Update nextep_seq[] based on seqnum[] */ ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (seqnum[i] != 0xff) { ++ if (seqnum[i+1] != 0xff) { ++ core_if->nextep_seq[seqnum[i]] = seqnum[i+1]; ++ } else { ++ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq; ++ break; ++ } ++ } else { ++ break; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]); ++ } ++ ++ /* Flush the Learning Queue */ ++ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl); ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ ++} ++ ++/** ++ * handle the IN EP disable interrupt. ++ */ ++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t gintmsk_data; ++ depctl_data_t depctl; ++ uint32_t diepdma; ++ uint32_t remain_to_transfer = 0; ++ uint8_t i; ++ uint32_t xfer_size; ++ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ complete_ep(ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl)); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++ ++ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { ++ if (ep->stopped) { ++ if (core_if->en_multiple_tx_fifo) ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ /* Clear the Global IN NP NAK */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ } else { ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); ++ } ++ return; ++ } ++ ++ if (core_if->start_predict > 2) { // NP IN EP ++ core_if->start_predict--; ++ return; ++ } ++ ++ core_if->start_predict--; ++ ++ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now ++ ++ predict_nextep_seq(core_if); ++ ++ /* Update all active IN EP's NextEP field based of nextep_seq[] */ ++ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP ++ depctl.b.nextep = core_if->nextep_seq[i]; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ } ++ /* Flush Shared NP TxFIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0); ++ /* Rewind buffers */ ++ if (!core_if->dma_desc_enable) { ++ i = core_if->first_in_nextep_seq; ++ do { ++ ep = get_in_ep(pcd, i); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count; ++ if (xfer_size > ep->dwc_ep.maxxfer) ++ xfer_size = ep->dwc_ep.maxxfer; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ if (xfer_size == 0) { ++ remain_to_transfer = 0; ++ } else { ++ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) { ++ remain_to_transfer = ++ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket; ++ } else { ++ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) ++ + (xfer_size % ep->dwc_ep.maxpacket); ++ } ++ } ++ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma); ++ dieptsiz.b.xfersize = remain_to_transfer; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32); ++ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ } else { // dma_desc_enable ++ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__); ++ } ++ ++ /* Restart transfers in predicted sequences */ ++ i = core_if->first_in_nextep_seq; ++ do { ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Unmask EP Mismatch interrupt */ ++ gintmsk_data.d32 = 0; ++ gintmsk_data.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32); ++ ++ core_if->start_predict = 0; ++ ++ } ++} ++ ++/** ++ * Handler for the IN EP timeout handshake interrupt. ++ */ ++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ ++#ifdef DEBUG ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ uint32_t num = 0; ++#endif ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ /* Disable the NP Tx Fifo Empty Interrrupt */ ++ if (!core_if->dma_enable) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } ++ /** @todo NGS Check EP type. ++ * Implement for Periodic EPs */ ++ /* ++ * Non-periodic EP ++ */ ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ ++ /* Set Global IN NAK */ ++ dctl.b.sgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ ep->stopped = 1; ++ ++#ifdef DEBUG ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz); ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++#endif ++ ++#ifdef DISABLE_PERIODIC_EP ++ /* ++ * Set the NAK bit for this EP to ++ * start the disable process. ++ */ ++ diepctl.d32 = 0; ++ diepctl.b.snak = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, ++ diepctl.d32); ++ ep->disabling = 1; ++ ep->stopped = 1; ++#endif ++} ++ ++/** ++ * Handler for the IN EP NAK interrupt. ++ */ ++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ diepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP Babble interrupt. ++ */ ++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "OUT EP Babble"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.babble = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NAK interrupt. ++ */ ++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NYET interrupt. ++ */ ++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nyet = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that an IN EP has a pending Interrupt. ++ * The sequence for handling the IN EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each IN EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Time-out Handshake" log error ++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx ++ * FIFO. ++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP ++ * Mismatch Interrupt) ++ */ ++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ diepint_data_t diepint = {.d32=0}; \ ++ diepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ ++ diepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ diepint_data_t diepint = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ uint32_t ep_intr; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); ++ ++ /* Service the Device IN interrupts for each endpoint */ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ uint32_t empty_msk; ++ /* Get EP pointer */ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ empty_msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", ++ epnum, empty_msk, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++ ++ diepint.d32 = ++ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP %d Interrupt Register - 0x%x\n", epnum, ++ diepint.d32); ++ /* Transfer complete */ ++ if (diepint.b.xfercompl) { ++ /* Disable the NP Tx FIFO Empty ++ * Interrupt */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } else { ++ /* Disable the Tx FIFO Empty Interrupt for this EP */ ++ uint32_t fifoemptymsk = ++ 0x1 << dwc_ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ fifoemptymsk, 0); ++ } ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); ++ ++ /* Complete the transfer */ ++ if (epnum == 0) { ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_iso_ep(pcd, ep); ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++ } ++#endif /* DWC_UTE_PER_IO */ ++ else { ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && ++ dwc_ep->bInterval > 1) { ++ dwc_ep->frame_num += dwc_ep->bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) ++ { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ complete_ep(ep); ++ if(diepint.b.nak) ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ /* Endpoint disable */ ++ if (diepint.b.epdisabled) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", ++ epnum); ++ handle_in_ep_disable_intr(pcd, epnum); ++ ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); ++ } ++ /* AHB Error */ ++ if (diepint.b.ahberr) { ++ DWC_ERROR("EP%d IN AHB Error\n", epnum); ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* TimeOUT Handshake (non-ISOC IN EPs) */ ++ if (diepint.b.timeout) { ++ DWC_ERROR("EP%d IN Time-out\n", epnum); ++ handle_in_ep_timeout_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, timeout); ++ } ++ /** IN Token received with TxF Empty */ ++ if (diepint.b.intktxfemp) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN TxFifo Empty\n", ++ epnum); ++ if (!ep->stopped && epnum != 0) { ++ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepeachintmsk ++ [epnum], diepmsk.d32, 0); ++ } else { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepmsk, ++ diepmsk.d32, 0); ++ } ++ } else if (core_if->dma_desc_enable ++ && epnum == 0 ++ && pcd->ep0state == ++ EP0_OUT_STATUS_PHASE) { ++ // EP0 IN set STALL ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); ++ } ++ /** IN Token Received with EP mismatch */ ++ if (diepint.b.intknepmis) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN EP Mismatch\n", epnum); ++ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); ++ } ++ /** IN Endpoint NAK Effective */ ++ if (diepint.b.inepnakeff) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN EP NAK Effective\n", ++ epnum); ++ /* Periodic EP */ ++ if (ep->disabling) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); ++ ++ } ++ ++ /** IN EP Tx FIFO Empty Intr */ ++ if (diepint.b.emptyintr) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d Tx FIFO Empty Intr \n", ++ epnum); ++ write_empty_tx_fifo(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); ++ ++ } ++ ++ /** IN EP BNA Intr */ ++ if (diepint.b.bna) { ++ CLEAR_IN_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* NAK Interrutp */ ++ if (diepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", ++ epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl_data_t depctl; ++ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) { ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl.d32 = 0; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ } ++ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++#undef CLEAR_IN_EP_INTR ++} ++ ++/** ++ * This interrupt indicates that an OUT EP has a pending Interrupt. ++ * The sequence for handling the OUT EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each OUT EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB ++ * Command Processing) ++ */ ++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ doepint_data_t doepint = {.d32=0}; \ ++ doepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ ++ doepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ uint32_t ep_intr; ++ doepint_data_t doepint = {.d32 = 0 }; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); ++ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ /* Get EP pointer */ ++ ep = get_out_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++#endif ++ doepint.d32 = ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); ++ /* Moved this interrupt upper due to core deffect of asserting ++ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */ ++ if (doepint.b.stsphsercvd) { ++ deptsiz0_data_t deptsiz; ++ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doeptsiz); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable ++ && core_if->dma_desc_enable == 0 ++ && doepint.b.xfercompl ++ && deptsiz.b.xfersize == 24) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ doepint.b.xfercompl = 0; ++ ep0_out_start(core_if, pcd); ++ } ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= ++ OTG_CORE_REV_3_00a)) { ++ do_setup_in_status_phase(pcd); ++ } ++ } ++ /* Transfer complete */ ++ if (doepint.b.xfercompl) { ++ ++ if (epnum == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint), ++ doepint.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl)); ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable == 0) { ++ doepint_data_t doepint; ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ goto exit_xfercompl; ++ } ++ } ++ /* In case of DDMA look at SR bit to go to the Data Stage */ ++ if (core_if->dma_desc_enable) { ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ if (pcd->ep0state == EP0_IDLE) { ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ if(pcd->data_terminated) { ++ pcd->data_terminated = 0; ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8); ++ } ++ if (status.b.sr) { ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n"); ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ diepint_data_t diepint0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ ++ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) { ++ DWC_ERROR("EP0 is stalled/disconnected\n"); ++ } ++ ++ /* Clear IN xfercompl if set */ ++ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_DATA_PHASE)) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len ++ && (pcd->ep0state == EP0_OUT_DATA_PHASE)) ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE) ++ status.d32 = core_if->dev_if-> ++ out_desc_addr->status.d32; ++ ++ if (status.b.sr) { ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable ++ && core_if->dma_desc_enable == 0) { ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doeptsiz); ++ if (pcd->ep0state == EP0_IDLE) { ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ } ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (doeptsize0.b.supcnt == 3) { ++ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n"); ++ ep->dwc_ep.stp_rollover = 1; ++ } ++ if (doepint.b.setup) { ++retry: ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ ep->dwc_ep.stp_rollover = 0; ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_ANY, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if(doepint.b.setup) ++ goto retry; ++ ep0_out_start(core_if, pcd); ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ diepint_data_t diepint0 = {.d32 = 0}; ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ depctl_data_t diepctl0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0state == EP0_IN_DATA_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ if (diepint0.b.xfercompl) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ if (diepctl0.b.epena) { ++ diepint_data_t diepint = {.d32 = 0}; ++ diepctl0.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl, diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint.d32); ++ diepctl0.d32 = 0; ++ diepctl0.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, ++ diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint, ++ diepint.d32); ++ } ++ } ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++exit_xfercompl: ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32); ++ } else { ++ if (core_if->dma_desc_enable == 0 ++ || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (doepint.b.pktdrpsts == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, ++ epnum, ++ xfercompl); ++ complete_iso_ep(pcd, ep); ++ } else { ++ ++ doepint_data_t doepint = {.d32 = 0 }; ++ doepint.b.xfercompl = 1; ++ doepint.b.pktdrpsts = 1; ++ DWC_WRITE_REG32 ++ (&core_if->dev_if->out_ep_regs ++ [epnum]->doepint, ++ doepint.d32); ++ if (handle_iso_out_pkt_dropped ++ (core_if, dwc_ep)) { ++ complete_iso_ep(pcd, ++ ep); ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++#endif /* DWC_UTE_PER_IO */ ++ } else { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ ++ if (core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]); ++ pcd->core_if->ep_xfer_info[epnum].state = 0; ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ } ++ complete_ep(ep); ++ } ++ ++ } ++ ++ /* Endpoint disable */ ++ if (doepint.b.epdisabled) { ++ ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); ++ if (core_if->core_params->dev_out_nak) { ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ /* In case of timeout condition */ ++ if (core_if->ep_xfer_info[epnum].state == 2) { ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ /* Unmask goutnakeff interrupt which was masked ++ * during handle nak out interrupt */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ ++ complete_ep(ep); ++ } ++ } ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ { ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ dwc_otg_pcd_request_t *req = 0; ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ } else { ++ dwc_otg_request_done(ep, req, 0); ++ start_next_request(ep); ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ } ++ } ++ } ++ /* AHB Error */ ++ if (doepint.b.ahberr) { ++ DWC_ERROR("EP%d OUT AHB Error\n", epnum); ++ DWC_ERROR("EP%d DEPDMA=0x%08x \n", ++ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma); ++ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* Setup Phase Done (contorl EPs) */ ++ if (doepint.b.setup) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum); ++#endif ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ ++ handle_ep0(pcd); ++ } ++ ++ /** OUT EP BNA Intr */ ++ if (doepint.b.bna) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* Babble Interrupt */ ++ if (doepint.b.babble) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", ++ epnum); ++ handle_out_ep_babble_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, babble); ++ } ++ if (doepint.b.outtknepdis) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \ ++ disabled\n",epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ doepmsk_data_t doepmsk = {.d32 = 0}; ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ doepmsk.d32, 0); ++ } ++ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis); ++ } ++ ++ /* NAK Interrutp */ ++ if (doepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); ++ handle_out_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nak); ++ } ++ /* NYET Interrutp */ ++ if (doepint.b.nyet) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); ++ handle_out_ep_nyet_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); ++ } ++ } ++ ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++ ++#undef CLEAR_OUT_EP_INTR ++} ++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun) ++{ ++ int retval = 0; ++ if(!frm_overrun && curr_fr >= trgt_fr) ++ retval = 1; ++ else if (frm_overrun ++ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2))) ++ retval = 1; ++ return retval; ++} ++/** ++ * Incomplete ISO IN Transfer Interrupt. ++ * This interrupt indicates one of the following conditions occurred ++ * while transmitting an ISOC transaction. ++ * - Corrupted IN Token for ISOC EP. ++ * - Packet not complete in FIFO. ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Disable EP; when "Endpoint Disabled" interrupt is received ++ * Flush FIFO ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++ ++#else ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n"); ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i-1].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, ++ dwc_ep->frm_overrun)) ++ { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32); ++ } ++ } ++ } ++ ++ /*intr_mask.b.incomplisoin = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); */ ++#endif //DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoin = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Incomplete ISO OUT Transfer Interrupt. ++ * ++ * This interrupt indicates that the core has dropped an ISO OUT ++ * packet. The following conditions can be the cause: ++ * - FIFO Full, the entire packet would not fit in the FIFO. ++ * - CRC Error ++ * - Corrupted Token ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Read any data from the FIFO ++ * -# Disable EP. When "Endpoint Disabled" interrupt is received ++ * re-enable EP. ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) ++{ ++ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (pcd->out_ep[i].dwc_ep.active && ++ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), ++ &pcd->out_ep[i].dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++#else ++ /** @todo implement ISR */ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep = NULL; ++ int i; ++ core_if = GET_CORE_IF(pcd); ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->out_ep[i].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) { ++ core_if->dev_if->isoc_ep = dwc_ep; ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); ++ break; ++ } ++ } ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ if (!intr_mask.b.goutnakeff) { ++ /* Unmask it */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32); ++ } ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++#endif /* DWC_EN_ISOC */ ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoout = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Global IN NAK Effective interrupt. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); ++ ++ /* Disable all active IN EPs */ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) { ++ if (core_if->start_predict > 0) ++ core_if->start_predict++; ++ diepctl.b.epdis = 1; ++ diepctl.b.snak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32); ++ } ++ } ++ ++ ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.ginnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * OUT NAK Effective. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ depctl_data_t doepctl; ++ int i; ++ ++ /* Disable the Global OUT NAK Effective Interrupt */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* If DEV OUT NAK enabled*/ ++ if (pcd->core_if->core_params->dev_out_nak) { ++ /* Run over all out endpoints to determine the ep number on ++ * which the timeout has happened ++ */ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ if ( pcd->core_if->ep_xfer_info[i].state == 2 ) ++ break; ++ } ++ if (i > dev_if->num_out_eps) { ++ dctl_data_t dctl; ++ dctl.d32 = ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ goto out; ++ } ++ ++ /* Disable the endpoint */ ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ return 1; ++ } ++ /* We come here from Incomplete ISO OUT handler */ ++ if (dev_if->isoc_ep) { ++ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep; ++ uint32_t epnum = dwc_ep->num; ++ doepint_data_t doepint; ++ doepint.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint); ++ dev_if->isoc_ep = NULL; ++ doepctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl); ++ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl, ++ doepctl.d32); ++ return 1; ++ } else ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "Global OUT NAK Effective\n"); ++ ++out: ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * PCD interrupt handler. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * ++ * All interrupt registers are processed from LSB to MSB. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++#ifdef VERBOSE ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++#endif ++ gintsts_data_t gintr_status; ++ int32_t retval = 0; ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ return retval; ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK(pcd->lock); ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ gintr_status.d32 = dwc_otg_read_core_intr(core_if); ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", ++ __func__, gintr_status.d32); ++ ++ if (gintr_status.b.sofintr) { ++ retval |= dwc_otg_pcd_handle_sof_intr(pcd); ++ } ++ if (gintr_status.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); ++ } ++ if (gintr_status.b.nptxfempty) { ++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); ++ } ++ if (gintr_status.b.goutnakeff) { ++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); ++ } ++ if (gintr_status.b.i2cintr) { ++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); ++ } ++ if (gintr_status.b.erlysuspend) { ++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); ++ } ++ if (gintr_status.b.usbreset) { ++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); ++ } ++ if (gintr_status.b.enumdone) { ++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); ++ } ++ if (gintr_status.b.isooutdrop) { ++ retval |= ++ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr ++ (pcd); ++ } ++ if (gintr_status.b.eopframe) { ++ retval |= ++ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); ++ } ++ if (gintr_status.b.inepint) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.outepintr) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.epmismatch) { ++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd); ++ } ++ if (gintr_status.b.fetsusp) { ++ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd); ++ } ++ if (gintr_status.b.ginnakeff) { ++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); ++ } ++ if (gintr_status.b.incomplisoin) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); ++ } ++ if (gintr_status.b.incomplisoout) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); ++ } ++ ++ /* In MPI mode Device Endpoints interrupts are asserted ++ * without setting outepintr and inepint bits set, so these ++ * Interrupt handlers are called without checking these bit-fields ++ */ ++ if (core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintsts)); ++#endif ++ DWC_SPINUNLOCK(pcd->lock); ++ } ++ return retval; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +new file mode 100644 +index 000000000000..e799f15f2947 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +@@ -0,0 +1,1280 @@ ++ /* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ ++ * $Revision: #21 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements the Peripheral Controller Driver. ++ * ++ * The Peripheral Controller Driver (PCD) is responsible for ++ * translating requests from the Function Driver into the appropriate ++ * actions on the DWC_otg controller. It isolates the Function Driver ++ * from the specifics of the controller by providing an API to the ++ * Function Driver. ++ * ++ * The Peripheral Controller Driver for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. ++ * (Gadget Driver is the Linux terminology for a Function Driver.) ++ * ++ * The Linux Gadget API is defined in the header file ++ * . The USB EP operations API is ++ * defined in the structure usb_ep_ops and the USB ++ * Controller API is defined in the structure ++ * usb_gadget_ops. ++ * ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_dbg.h" ++ ++extern bool fiq_enable; ++ ++static struct gadget_wrapper { ++ dwc_otg_pcd_t *pcd; ++ ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ struct usb_ep ep0; ++ struct usb_ep in_ep[16]; ++ struct usb_ep out_ep[16]; ++ ++} *gadget_wrapper; ++ ++/* Display the contents of the buffer */ ++extern void dump_msg(const u8 * buf, unsigned int length); ++/** ++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case ++ * if the endpoint is not found ++ */ ++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/* USB Endpoint Operations */ ++/* ++ * The following sections briefly describe the behavior of the Gadget ++ * API endpoint operations implemented in the DWC_otg driver ++ * software. Detailed descriptions of the generic behavior of each of ++ * these functions can be found in the Linux header file ++ * include/linux/usb_gadget.h. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper ++ * function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper ++ * functions. Within each section, the corresponding DWC_otg PCD ++ * function name is specified. ++ * ++ */ ++ ++/** ++ * This function is called by the Gadget Driver for each EP to be ++ * configured for the current configuration (SET_CONFIGURATION). ++ * ++ * This function initializes the dwc_otg_ep_t data structure, and then ++ * calls dwc_otg_ep_activate. ++ */ ++static int ep_enable(struct usb_ep *usb_ep, ++ const struct usb_endpoint_descriptor *ep_desc) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); ++ ++ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { ++ DWC_WARN("%s, bad ep or descriptor\n", __func__); ++ return -EINVAL; ++ } ++ if (usb_ep == &gadget_wrapper->ep0) { ++ DWC_WARN("%s, bad ep(0)\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* Check FIFO size? */ ++ if (!ep_desc->wMaxPacketSize) { ++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); ++ return -ERANGE; ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ /* Delete after check - MAS */ ++#if 0 ++ nat = (uint32_t) ep_desc->wMaxPacketSize; ++ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat); ++ nat = (nat >> 11) & 0x03; ++ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat); ++#endif ++ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, ++ (const uint8_t *)ep_desc, ++ (void *)usb_ep); ++ if (retval) { ++ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); ++ return -EINVAL; ++ } ++ ++ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an EP is disabled due to disconnect or ++ * change in configuration. Any pending requests will terminate with a ++ * status of -ESHUTDOWN. ++ * ++ * This function modifies the dwc_otg_ep_t data structure for this EP, ++ * and then calls dwc_otg_ep_deactivate. ++ */ ++static int ep_disable(struct usb_ep *usb_ep) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); ++ if (!usb_ep) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, ++ usb_ep ? usb_ep->name : NULL); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function allocates a request object to use with the specified ++ * endpoint. ++ * ++ * @param ep The endpoint to be used with with the request ++ * @param gfp_flags the GFP_* flags to use. ++ */ ++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, ++ gfp_t gfp_flags) ++{ ++ struct usb_request *usb_req; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); ++ if (0 == ep) { ++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); ++ return 0; ++ } ++ usb_req = kzalloc(sizeof(*usb_req), gfp_flags); ++ if (0 == usb_req) { ++ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); ++ return 0; ++ } ++ usb_req->dma = DWC_DMA_ADDR_INVALID; ++ ++ return usb_req; ++} ++ ++/** ++ * This function frees a request object. ++ * ++ * @param ep The endpoint associated with the request ++ * @param req The request being freed ++ */ ++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); ++ ++ if (0 == ep || 0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "Invalid ep or req argument!\n"); ++ return; ++ } ++ ++ kfree(req); ++} ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++/** ++ * This function allocates an I/O buffer to be used for a transfer ++ * to/from the specified endpoint. ++ * ++ * @param usb_ep The endpoint to be used with with the request ++ * @param bytes The desired number of bytes for the buffer ++ * @param dma Pointer to the buffer's DMA address; must be valid ++ * @param gfp_flags the GFP_* flags to use. ++ * @return address of a new buffer or null is buffer could not be allocated. ++ */ ++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, ++ dma_addr_t * dma, gfp_t gfp_flags) ++{ ++ void *buf; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, ++ dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if ((bytes & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer size is not a multiple of" ++ "DWORD size (%d)", __func__, bytes); ++ } ++ ++ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); ++ WARN_ON(!buf); ++ ++ /* Check dword alignment */ ++ if (((int)buf & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", ++ __func__, buf); ++ } ++ ++ return buf; ++} ++ ++/** ++ * This function frees an I/O buffer that was allocated by alloc_buffer. ++ * ++ * @param usb_ep the endpoint associated with the buffer ++ * @param buf address of the buffer ++ * @param dma The buffer's DMA address ++ * @param bytes The number of bytes of the buffer ++ */ ++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, ++ dma_addr_t dma, unsigned bytes) ++{ ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); ++ ++ dma_free_coherent(NULL, bytes, buf, dma); ++} ++#endif ++ ++/** ++ * This function is used to submit an I/O Request to an EP. ++ * ++ * - When the request completes the request's completion callback ++ * is called to return the request to the driver. ++ * - An EP, except control EPs, may have multiple requests ++ * pending. ++ * - Once submitted the request cannot be examined or modified. ++ * - Each request is turned into one or more packets. ++ * - A BULK EP can queue any amount of data; the transfer is ++ * packetized. ++ * - Zero length Packets are specified with the request 'zero' ++ * flag. ++ */ ++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, ++ gfp_t gfp_flags) ++{ ++ dwc_otg_pcd_t *pcd; ++ struct dwc_otg_pcd_ep *ep = NULL; ++ int retval = 0, is_isoc_ep = 0; ++ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", ++ __func__, usb_ep, usb_req, gfp_flags); ++ ++ if (!usb_req || !usb_req->complete || !usb_req->buf) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ pcd = gadget_wrapper->pcd; ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ ++ usb_req->status = -EINPROGRESS; ++ usb_req->actual = 0; ++ ++ ep = ep_from_handle(pcd, usb_ep); ++ if (ep == NULL) ++ is_isoc_ep = 0; ++ else ++ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ dma_addr = usb_req->dma; ++#else ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ if (usb_req->length != 0 && ++ usb_req->dma == DWC_DMA_ADDR_INVALID) { ++ dma_addr = dma_map_single(dev, usb_req->buf, ++ usb_req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: ++ DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++ if (is_isoc_ep == 1) { ++ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req); ++ if (retval) ++ return -EINVAL; ++ ++ return 0; ++ } ++#endif ++ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0); ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * This function cancels an I/O request from an EP. ++ */ ++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); ++ ++ if (!usb_ep || !usb_req) { ++ DWC_WARN("bad argument\n"); ++ return -EINVAL; ++ } ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * usb_ep_set_halt stalls an endpoint. ++ * ++ * usb_ep_clear_halt clears an endpoint halt and resets its data ++ * toggle. ++ * ++ * Both of these functions are implemented with the same underlying ++ * function. The behavior depends on the value argument. ++ * ++ * @param[in] usb_ep the Endpoint to halt or clear halt. ++ * @param[in] value ++ * - 0 means clear_halt. ++ * - 1 means set_halt, ++ * - 2 means clear stall lock flag. ++ * - 3 means set stall lock flag. ++ */ ++static int ep_halt(struct usb_ep *usb_ep, int value) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); ++ if (retval == -DWC_E_AGAIN) { ++ return -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#if 0 ++/** ++ * ep_wedge: sets the halt feature and ignores clear requests ++ * ++ * @usb_ep: the endpoint being wedged ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative errno. * ++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details ++ */ ++static int ep_wedge(struct usb_ep *usb_ep) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); ++ if (retval == -DWC_E_AGAIN) { ++ retval = -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++#endif ++ ++#ifdef DWC_EN_ISOC ++/** ++ * This function is used to submit an ISOC Transfer Request to an EP. ++ * ++ * - Every time a sync period completes the request's completion callback ++ * is called to provide data to the gadget driver. ++ * - Once submitted the request cannot be modified. ++ * - Each request is turned into periodic data packets untill ISO ++ * Transfer is stopped.. ++ */ ++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, ++ gfp_t gfp_flags) ++{ ++ int retval = 0; ++ ++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_PRINTF("bad params\n"); ++ return -EINVAL; ++ } ++ ++ req->status = -EINPROGRESS; ++ ++ retval = ++ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, ++ req->buf1, req->dma0, req->dma1, ++ req->sync_frame, req->data_pattern_frame, ++ req->data_per_frame, ++ req-> ++ flags & USB_REQ_ISO_ASAP ? -1 : ++ req->start_frame, req->buf_proc_intrvl, ++ req, gfp_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function stops ISO EP Periodic Data Transfer. ++ */ ++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) ++{ ++ int retval = 0; ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ } ++ ++ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, ++ int packets, gfp_t gfp_flags) ++{ ++ struct usb_iso_request *pReq = NULL; ++ uint32_t req_size; ++ ++ req_size = sizeof(struct usb_iso_request); ++ req_size += ++ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); ++ ++ pReq = kmalloc(req_size, gfp_flags); ++ if (!pReq) { ++ DWC_WARN("Can't allocate Iso Request\n"); ++ return 0; ++ } ++ pReq->iso_packet_desc0 = (void *)(pReq + 1); ++ ++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; ++ ++ return pReq; ++} ++ ++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) ++{ ++ kfree(req); ++} ++ ++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { ++ .ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ }, ++ .iso_ep_start = iso_ep_start, ++ .iso_ep_stop = iso_ep_stop, ++ .alloc_iso_request = alloc_iso_request, ++ .free_iso_request = free_iso_request, ++}; ++ ++#else ++ ++ int (*enable) (struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *desc); ++ int (*disable) (struct usb_ep *ep); ++ ++ struct usb_request *(*alloc_request) (struct usb_ep *ep, ++ gfp_t gfp_flags); ++ void (*free_request) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*queue) (struct usb_ep *ep, struct usb_request *req, ++ gfp_t gfp_flags); ++ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*set_halt) (struct usb_ep *ep, int value); ++ int (*set_wedge) (struct usb_ep *ep); ++ ++ int (*fifo_status) (struct usb_ep *ep); ++ void (*fifo_flush) (struct usb_ep *ep); ++static struct usb_ep_ops dwc_otg_pcd_ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#else ++ /* .set_wedge = ep_wedge, */ ++ .set_wedge = NULL, /* uses set_halt instead */ ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ ++}; ++ ++#endif /* _EN_ISOC_ */ ++/* Gadget Operations */ ++/** ++ * The following gadget operations will be implemented in the DWC_otg ++ * PCD. Functions in the API that are not described below are not ++ * implemented. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the ++ * wrapper function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper functions ++ * (except for ioctl, which doesn't have a wrapper function). Within ++ * each section, the corresponding DWC_otg PCD function name is ++ * specified. ++ * ++ */ ++ ++/** ++ *Gets the USB Frame number of the last SOF. ++ */ ++static int get_frame_number(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ return dwc_otg_pcd_get_frame_number(d->pcd); ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++static int test_lpm_enabled(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ ++ return dwc_otg_pcd_is_lpm_enabled(d->pcd); ++} ++#endif ++ ++/** ++ * Initiates Session Request Protocol (SRP) to wakeup the host if no ++ * session is in progress. If a session is already in progress, but ++ * the device is suspended, remote wakeup signaling is started. ++ * ++ */ ++static int wakeup(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } else { ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ } ++ dwc_otg_pcd_wakeup(d->pcd); ++ return 0; ++} ++ ++static const struct usb_gadget_ops dwc_otg_pcd_ops = { ++ .get_frame = get_frame_number, ++ .wakeup = wakeup, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .lpm_support = test_lpm_enabled, ++#endif ++ // current versions must always be self-powered ++}; ++ ++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { ++ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, ++ (struct usb_ctrlrequest ++ *)bytes); ++ } ++ ++ if (retval == -ENOTSUPP) { ++ retval = -DWC_E_NOT_SUPPORTED; ++ } else if (retval < 0) { ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++#ifdef DWC_EN_ISOC ++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num) ++{ ++ int i, packet_count; ++ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; ++ struct usb_iso_request *iso_req = req_handle; ++ ++ if (proc_buf_num) { ++ iso_packet = iso_req->iso_packet_desc1; ++ } else { ++ iso_packet = iso_req->iso_packet_desc0; ++ } ++ packet_count = ++ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); ++ for (i = 0; i < packet_count; ++i) { ++ int status; ++ int actual; ++ int offset; ++ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, ++ i, &status, &actual, &offset); ++ switch (status) { ++ case -DWC_E_NO_DATA: ++ status = -ENODATA; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("unknown status in isoc packet\n"); ++ } ++ ++ } ++ iso_packet[i].status = status; ++ iso_packet[i].offset = offset; ++ iso_packet[i].actual_length = actual; ++ } ++ ++ iso_req->status = 0; ++ iso_req->process_buffer(ep_handle, iso_req); ++ ++ return 0; ++} ++#endif /* DWC_EN_ISOC */ ++ ++#ifdef DWC_UTE_PER_IO ++/** ++ * Copy the contents of the extended request to the Linux usb_request's ++ * extended part and call the gadget's completion. ++ * ++ * @param pcd Pointer to the pcd structure ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param req_handle Void pointer to the usb_request structure ++ * @param status Request status returned from the portable logic ++ * @param ereq_port Void pointer to the extended request structure ++ * created in the the portable part that contains the ++ * results of the processed iso packets. ++ */ ++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, void *ereq_port) ++{ ++ struct dwc_ute_iso_req_ext *ereqorg = NULL; ++ struct dwc_iso_xreq_port *ereqport = NULL; ++ struct dwc_ute_iso_packet_descriptor *desc_org = NULL; ++ int i; ++ struct usb_request *req; ++ //struct dwc_ute_iso_packet_descriptor * ++ //int status = 0; ++ ++ req = (struct usb_request *)req_handle; ++ ereqorg = &req->ext_req; ++ ereqport = (struct dwc_iso_xreq_port *)ereq_port; ++ desc_org = ereqorg->per_io_frame_descs; ++ ++ if (req && req->complete) { ++ /* Copy the request data from the portable logic to our request */ ++ for (i = 0; i < ereqport->pio_pkt_count; i++) { ++ desc_org[i].actual_length = ++ ereqport->per_io_frame_descs[i].actual_length; ++ desc_org[i].status = ++ ereqport->per_io_frame_descs[i].status; ++ } ++ ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ } ++ ++ /* And call the gadget's completion */ ++ req->complete(ep_handle, req); ++ } ++ ++ return 0; ++} ++#endif /* DWC_UTE_PER_IO */ ++ ++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, uint32_t actual) ++{ ++ struct usb_request *req = (struct usb_request *)req_handle; ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ struct dwc_otg_pcd_ep *ep = NULL; ++#endif ++ ++ if (req && req->complete) { ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ ++ } ++ ++ req->actual = actual; ++ DWC_SPINUNLOCK(pcd->lock); ++ req->complete(ep_handle, req); ++ DWC_SPINLOCK(pcd->lock); ++ } ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ ep = ep_from_handle(pcd, ep_handle); ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ if (req->length != 0) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ dma_unmap_single(dev, req->dma, req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++ return 0; ++} ++ ++static int _connect(dwc_otg_pcd_t * pcd, int speed) ++{ ++ gadget_wrapper->gadget.speed = speed; ++ return 0; ++} ++ ++static int _disconnect(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { ++ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++static int _resume(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { ++ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); ++ } ++ ++ return 0; ++} ++ ++static int _suspend(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { ++ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++/** ++ * This function updates the otg values in the gadget structure. ++ */ ++static int _hnp_changed(dwc_otg_pcd_t * pcd) ++{ ++ ++ if (!gadget_wrapper->gadget.is_otg) ++ return 0; ++ ++ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); ++ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); ++ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); ++ return 0; ++} ++ ++static int _reset(dwc_otg_pcd_t * pcd) ++{ ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) ++{ ++ int retval = -DWC_E_INVALID; ++ if (gadget_wrapper->driver->cfi_feature_setup) { ++ retval = ++ gadget_wrapper->driver-> ++ cfi_feature_setup(&gadget_wrapper->gadget, ++ (struct cfi_usb_ctrlrequest *)cfi_req); ++ } ++ ++ return retval; ++} ++#endif ++ ++static const struct dwc_otg_pcd_function_ops fops = { ++ .complete = _complete, ++#ifdef DWC_EN_ISOC ++ .isoc_complete = _isoc_complete, ++#endif ++ .setup = _setup, ++ .disconnect = _disconnect, ++ .connect = _connect, ++ .resume = _resume, ++ .suspend = _suspend, ++ .hnp_changed = _hnp_changed, ++ .reset = _reset, ++#ifdef DWC_UTE_CFI ++ .cfi_setup = _cfi_setup, ++#endif ++#ifdef DWC_UTE_PER_IO ++ .xisoc_complete = _xisoc_complete, ++#endif ++}; ++ ++/** ++ * This function is the top level PCD interrupt handler. ++ */ ++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) ++{ ++ dwc_otg_pcd_t *pcd = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_pcd_handle_intr(pcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function initialized the usb_ep structures to there default ++ * state. ++ * ++ * @param d Pointer on gadget_wrapper. ++ */ ++void gadget_add_eps(struct gadget_wrapper *d) ++{ ++ static const char *names[] = { ++ ++ "ep0", ++ "ep1in", ++ "ep2in", ++ "ep3in", ++ "ep4in", ++ "ep5in", ++ "ep6in", ++ "ep7in", ++ "ep8in", ++ "ep9in", ++ "ep10in", ++ "ep11in", ++ "ep12in", ++ "ep13in", ++ "ep14in", ++ "ep15in", ++ "ep1out", ++ "ep2out", ++ "ep3out", ++ "ep4out", ++ "ep5out", ++ "ep6out", ++ "ep7out", ++ "ep8out", ++ "ep9out", ++ "ep10out", ++ "ep11out", ++ "ep12out", ++ "ep13out", ++ "ep14out", ++ "ep15out" ++ }; ++ ++ int i; ++ struct usb_ep *ep; ++ int8_t dev_endpoints; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); ++ ++ INIT_LIST_HEAD(&d->gadget.ep_list); ++ d->gadget.ep0 = &d->ep0; ++ d->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &d->ep0; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[0]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ ++ /** ++ * Initialize the EP structures. ++ */ ++ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->in_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[d->pcd->in_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->out_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ /* remove ep0 from the list. There is a ep0 pointer. */ ++ list_del_init(&d->ep0.ep_list); ++ ++ d->ep0.maxpacket = MAX_EP0_SIZE; ++} ++ ++/** ++ * This function releases the Gadget device. ++ * required by device_unregister(). ++ * ++ * @todo Should this do something? Should it free the PCD? ++ */ ++static void dwc_otg_pcd_gadget_release(struct device *dev) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); ++} ++ ++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev) ++{ ++ static char pcd_name[] = "dwc_otg_pcd"; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ struct gadget_wrapper *d; ++ int retval; ++ ++ d = DWC_ALLOC(sizeof(*d)); ++ if (d == NULL) { ++ return NULL; ++ } ++ ++ memset(d, 0, sizeof(*d)); ++ ++ d->gadget.name = pcd_name; ++ d->pcd = otg_dev->pcd; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ strcpy(d->gadget.dev.bus_id, "gadget"); ++#else ++ dev_set_name(&d->gadget.dev, "%s", "gadget"); ++#endif ++ ++ d->gadget.dev.parent = &_dev->dev; ++ d->gadget.dev.release = dwc_otg_pcd_gadget_release; ++ d->gadget.ops = &dwc_otg_pcd_ops; ++ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL; ++ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); ++ ++ d->driver = 0; ++ /* Register the gadget device */ ++ retval = device_register(&d->gadget.dev); ++ if (retval != 0) { ++ DWC_ERROR("device_register failed\n"); ++ DWC_FREE(d); ++ return NULL; ++ } ++ ++ return d; ++} ++ ++static void free_wrapper(struct gadget_wrapper *d) ++{ ++ if (d->driver) { ++ /* should have been done already by driver model core */ ++ DWC_WARN("driver '%s' is still registered\n", ++ d->driver->driver.name); ++#ifdef CONFIG_USB_GADGET ++ usb_gadget_unregister_driver(d->driver); ++#endif ++ } ++ ++ device_unregister(&d->gadget.dev); ++ DWC_FREE(d); ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++int pcd_init(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); ++ ++ otg_dev->pcd = dwc_otg_pcd_init(otg_dev); ++ ++ if (!otg_dev->pcd) { ++ DWC_ERROR("dwc_otg_pcd_init failed\n"); ++ return -ENOMEM; ++ } ++ ++ otg_dev->pcd->otg_dev = otg_dev; ++ gadget_wrapper = alloc_wrapper(_dev); ++ ++ /* ++ * Initialize EP structures ++ */ ++ gadget_add_eps(gadget_wrapper); ++ /* ++ * Setup interupt handler ++ */ ++#ifdef PLATFORM_INTERFACE ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ platform_get_irq(_dev, fiq_enable ? 0 : 1)); ++ retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, ++ IRQF_SHARED, gadget_wrapper->gadget.name, ++ otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", ++ platform_get_irq(_dev, fiq_enable ? 0 : 1)); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#else ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ _dev->irq); ++ retval = request_irq(_dev->irq, dwc_otg_pcd_irq, ++ IRQF_SHARED | IRQF_DISABLED, ++ gadget_wrapper->gadget.name, otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", _dev->irq); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#endif ++ ++ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); ++ ++ return retval; ++} ++ ++/** ++ * Cleanup the PCD. ++ */ ++void pcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_pcd_t *pcd = otg_dev->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ /* ++ * Free the IRQ ++ */ ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), pcd); ++#else ++ free_irq(_dev->irq, pcd); ++#endif ++ dwc_otg_pcd_remove(otg_dev->pcd); ++ free_wrapper(gadget_wrapper); ++ otg_dev->pcd = 0; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_regs.h b/drivers/usb/host/dwc_otg/dwc_otg_regs.h +new file mode 100644 +index 000000000000..8e0e7b569f1a +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h +@@ -0,0 +1,2550 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ ++ * $Revision: #98 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_REGS_H__ ++#define __DWC_OTG_REGS_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** ++ * @file ++ * ++ * This file contains the data structures for accessing the DWC_otg core registers. ++ * ++ * The application interfaces with the HS OTG core by reading from and ++ * writing to the Control and Status Register (CSR) space through the ++ * AHB Slave interface. These registers are 32 bits wide, and the ++ * addresses are 32-bit-block aligned. ++ * CSRs are classified as follows: ++ * - Core Global Registers ++ * - Device Mode Registers ++ * - Device Global Registers ++ * - Device Endpoint Specific Registers ++ * - Host Mode Registers ++ * - Host Global Registers ++ * - Host Port CSRs ++ * - Host Channel Specific Registers ++ * ++ * Only the Core Global registers can be accessed in both Device and ++ * Host modes. When the HS OTG core is operating in one mode, either ++ * Device or Host, the application must not access registers from the ++ * other mode. When the core switches from one mode to another, the ++ * registers in the new mode of operation must be reprogrammed as they ++ * would be after a power-on reset. ++ */ ++ ++/****************************************************************************/ ++/** DWC_otg Core registers . ++ * The dwc_otg_core_global_regs structure defines the size ++ * and relative field offsets for the Core Global registers. ++ */ ++typedef struct dwc_otg_core_global_regs { ++ /** OTG Control and Status Register. Offset: 000h */ ++ volatile uint32_t gotgctl; ++ /** OTG Interrupt Register. Offset: 004h */ ++ volatile uint32_t gotgint; ++ /**Core AHB Configuration Register. Offset: 008h */ ++ volatile uint32_t gahbcfg; ++ ++#define DWC_GLBINTRMASK 0x0001 ++#define DWC_DMAENABLE 0x0020 ++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 ++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 ++#define DWC_PTXEMPTYLVL_EMPTY 0x0100 ++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 ++ ++ /**Core USB Configuration Register. Offset: 00Ch */ ++ volatile uint32_t gusbcfg; ++ /**Core Reset Register. Offset: 010h */ ++ volatile uint32_t grstctl; ++ /**Core Interrupt Register. Offset: 014h */ ++ volatile uint32_t gintsts; ++ /**Core Interrupt Mask Register. Offset: 018h */ ++ volatile uint32_t gintmsk; ++ /**Receive Status Queue Read Register (Read Only). Offset: 01Ch */ ++ volatile uint32_t grxstsr; ++ /**Receive Status Queue Read & POP Register (Read Only). Offset: 020h*/ ++ volatile uint32_t grxstsp; ++ /**Receive FIFO Size Register. Offset: 024h */ ++ volatile uint32_t grxfsiz; ++ /**Non Periodic Transmit FIFO Size Register. Offset: 028h */ ++ volatile uint32_t gnptxfsiz; ++ /**Non Periodic Transmit FIFO/Queue Status Register (Read ++ * Only). Offset: 02Ch */ ++ volatile uint32_t gnptxsts; ++ /**I2C Access Register. Offset: 030h */ ++ volatile uint32_t gi2cctl; ++ /**PHY Vendor Control Register. Offset: 034h */ ++ volatile uint32_t gpvndctl; ++ /**General Purpose Input/Output Register. Offset: 038h */ ++ volatile uint32_t ggpio; ++ /**User ID Register. Offset: 03Ch */ ++ volatile uint32_t guid; ++ /**Synopsys ID Register (Read Only). Offset: 040h */ ++ volatile uint32_t gsnpsid; ++ /**User HW Config1 Register (Read Only). Offset: 044h */ ++ volatile uint32_t ghwcfg1; ++ /**User HW Config2 Register (Read Only). Offset: 048h */ ++ volatile uint32_t ghwcfg2; ++#define DWC_SLAVE_ONLY_ARCH 0 ++#define DWC_EXT_DMA_ARCH 1 ++#define DWC_INT_DMA_ARCH 2 ++ ++#define DWC_MODE_HNP_SRP_CAPABLE 0 ++#define DWC_MODE_SRP_ONLY_CAPABLE 1 ++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 ++#define DWC_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ /**User HW Config3 Register (Read Only). Offset: 04Ch */ ++ volatile uint32_t ghwcfg3; ++ /**User HW Config4 Register (Read Only). Offset: 050h*/ ++ volatile uint32_t ghwcfg4; ++ /** Core LPM Configuration register Offset: 054h*/ ++ volatile uint32_t glpmcfg; ++ /** Global PowerDn Register Offset: 058h */ ++ volatile uint32_t gpwrdn; ++ /** Global DFIFO SW Config Register Offset: 05Ch */ ++ volatile uint32_t gdfifocfg; ++ /** ADP Control Register Offset: 060h */ ++ volatile uint32_t adpctl; ++ /** Reserved Offset: 064h-0FFh */ ++ volatile uint32_t reserved39[39]; ++ /** Host Periodic Transmit FIFO Size Register. Offset: 100h */ ++ volatile uint32_t hptxfsiz; ++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, ++ otherwise Device Transmit FIFO#n Register. ++ * Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15). */ ++ volatile uint32_t dtxfsiz[15]; ++} dwc_otg_core_global_regs_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Control ++ * and Status Register (GOTGCTL). Set the bits using the bit ++ * fields then write the d32 value to the register. ++ */ ++typedef union gotgctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned sesreqscs:1; ++ unsigned sesreq:1; ++ unsigned vbvalidoven:1; ++ unsigned vbvalidovval:1; ++ unsigned avalidoven:1; ++ unsigned avalidovval:1; ++ unsigned bvalidoven:1; ++ unsigned bvalidovval:1; ++ unsigned hstnegscs:1; ++ unsigned hnpreq:1; ++ unsigned hstsethnpen:1; ++ unsigned devhnpen:1; ++ unsigned reserved12_15:4; ++ unsigned conidsts:1; ++ unsigned dbnctime:1; ++ unsigned asesvld:1; ++ unsigned bsesvld:1; ++ unsigned otgver:1; ++ unsigned reserved1:1; ++ unsigned multvalidbc:5; ++ unsigned chirpen:1; ++ unsigned reserved28_31:4; ++ } b; ++} gotgctl_data_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Interrupt Register ++ * (GOTGINT). Set/clear the bits using the bit fields then write the d32 ++ * value to the register. ++ */ ++typedef union gotgint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Current Mode */ ++ unsigned reserved0_1:2; ++ ++ /** Session End Detected */ ++ unsigned sesenddet:1; ++ ++ unsigned reserved3_7:5; ++ ++ /** Session Request Success Status Change */ ++ unsigned sesreqsucstschng:1; ++ /** Host Negotiation Success Status Change */ ++ unsigned hstnegsucstschng:1; ++ ++ unsigned reserved10_16:7; ++ ++ /** Host Negotiation Detected */ ++ unsigned hstnegdet:1; ++ /** A-Device Timeout Change */ ++ unsigned adevtoutchng:1; ++ /** Debounce Done */ ++ unsigned debdone:1; ++ /** Multi-Valued input changed */ ++ unsigned mvic:1; ++ ++ unsigned reserved31_21:11; ++ ++ } b; ++} gotgint_data_t; ++ ++/** ++ * This union represents the bit fields of the Core AHB Configuration ++ * Register (GAHBCFG). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gahbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned glblintrmsk:1; ++#define DWC_GAHBCFG_GLBINT_ENABLE 1 ++ ++ unsigned hburstlen:4; ++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 ++ ++ unsigned dmaenable:1; ++#define DWC_GAHBCFG_DMAENABLE 1 ++ unsigned reserved:1; ++ unsigned nptxfemplvl_txfemplvl:1; ++ unsigned ptxfemplvl:1; ++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 ++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 ++ unsigned reserved9_20:12; ++ unsigned remmemsupp:1; ++ unsigned notialldmawrit:1; ++ unsigned ahbsingle:1; ++ unsigned reserved24_31:8; ++ } b; ++} gahbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core USB Configuration ++ * Register (GUSBCFG). Set the bits using the bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union gusbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned toutcal:3; ++ unsigned phyif:1; ++ unsigned ulpi_utmi_sel:1; ++ unsigned fsintf:1; ++ unsigned physel:1; ++ unsigned ddrsel:1; ++ unsigned srpcap:1; ++ unsigned hnpcap:1; ++ unsigned usbtrdtim:4; ++ unsigned reserved1:1; ++ unsigned phylpwrclksel:1; ++ unsigned otgutmifssel:1; ++ unsigned ulpi_fsls:1; ++ unsigned ulpi_auto_res:1; ++ unsigned ulpi_clk_sus_m:1; ++ unsigned ulpi_ext_vbus_drv:1; ++ unsigned ulpi_int_vbus_indicator:1; ++ unsigned term_sel_dl_pulse:1; ++ unsigned indicator_complement:1; ++ unsigned indicator_pass_through:1; ++ unsigned ulpi_int_prot_dis:1; ++ unsigned ic_usb_cap:1; ++ unsigned ic_traffic_pull_remove:1; ++ unsigned tx_end_delay:1; ++ unsigned force_host_mode:1; ++ unsigned force_dev_mode:1; ++ unsigned reserved31:1; ++ } b; ++} gusbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core Reset Register ++ * (GRSTCTL). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union grstctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Core Soft Reset (CSftRst) (Device and Host) ++ * ++ * The application can flush the control logic in the ++ * entire core using this bit. This bit resets the ++ * pipelines in the AHB Clock domain as well as the ++ * PHY Clock domain. ++ * ++ * The state machines are reset to an IDLE state, the ++ * control bits in the CSRs are cleared, all the ++ * transmit FIFOs and the receive FIFO are flushed. ++ * ++ * The status mask bits that control the generation of ++ * the interrupt, are cleared, to clear the ++ * interrupt. The interrupt status bits are not ++ * cleared, so the application can get the status of ++ * any events that occurred in the core after it has ++ * set this bit. ++ * ++ * Any transactions on the AHB are terminated as soon ++ * as possible following the protocol. Any ++ * transactions on the USB are terminated immediately. ++ * ++ * The configuration settings in the CSRs are ++ * unchanged, so the software doesn't have to ++ * reprogram these registers (Device ++ * Configuration/Host Configuration/Core System ++ * Configuration/Core PHY Configuration). ++ * ++ * The application can write to this bit, any time it ++ * wants to reset the core. This is a self clearing ++ * bit and the core clears this bit after all the ++ * necessary logic is reset in the core, which may ++ * take several clocks, depending on the current state ++ * of the core. ++ */ ++ unsigned csftrst:1; ++ /** Hclk Soft Reset ++ * ++ * The application uses this bit to reset the control logic in ++ * the AHB clock domain. Only AHB clock domain pipelines are ++ * reset. ++ */ ++ unsigned hsftrst:1; ++ /** Host Frame Counter Reset (Host Only)
++ * ++ * The application can reset the (micro)frame number ++ * counter inside the core, using this bit. When the ++ * (micro)frame counter is reset, the subsequent SOF ++ * sent out by the core, will have a (micro)frame ++ * number of 0. ++ */ ++ unsigned hstfrm:1; ++ /** In Token Sequence Learning Queue Flush ++ * (INTknQFlsh) (Device Only) ++ */ ++ unsigned intknqflsh:1; ++ /** RxFIFO Flush (RxFFlsh) (Device and Host) ++ * ++ * The application can flush the entire Receive FIFO ++ * using this bit. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is reading from the RxFIFO nor the MAC ++ * is writing the data in to the FIFO. The ++ * application should wait until the bit is cleared ++ * before performing any other operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned rxfflsh:1; ++ /** TxFIFO Flush (TxFFlsh) (Device and Host). ++ * ++ * This bit is used to selectively flush a single or ++ * all transmit FIFOs. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is writing into the TxFIFO nor the MAC ++ * is reading the data out of the FIFO. The ++ * application should wait until the core clears this ++ * bit, before performing any operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned txfflsh:1; ++ ++ /** TxFIFO Number (TxFNum) (Device and Host). ++ * ++ * This is the FIFO number which needs to be flushed, ++ * using the TxFIFO Flush bit. This field should not ++ * be changed until the TxFIFO Flush bit is cleared by ++ * the core. ++ * - 0x0 : Non Periodic TxFIFO Flush ++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode ++ * or Periodic TxFIFO in host mode ++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. ++ * - ... ++ * - 0xF : Periodic TxFIFO #15 Flush in device mode ++ * - 0x10: Flush all the Transmit NonPeriodic and ++ * Transmit Periodic FIFOs in the core ++ */ ++ unsigned txfnum:5; ++ /** Reserved */ ++ unsigned reserved11_29:19; ++ /** DMA Request Signal. Indicated DMA request is in ++ * probress. Used for debug purpose. */ ++ unsigned dmareq:1; ++ /** AHB Master Idle. Indicates the AHB Master State ++ * Machine is in IDLE condition. */ ++ unsigned ahbidle:1; ++ } b; ++} grstctl_t; ++ ++/** ++ * This union represents the bit fields of the Core Interrupt Mask ++ * Register (GINTMSK). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepintr:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintmsk_data_t; ++/** ++ * This union represents the bit fields of the Core Interrupt Register ++ * (GINTSTS). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union gintsts_data { ++ /** raw register data */ ++ uint32_t d32; ++#define DWC_SOF_INTR_MASK 0x0008 ++ /** register bits */ ++ struct { ++#define DWC_HOST_MODE 1 ++ unsigned curmode:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepint:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union device_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned epnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet ++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete ++ ++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK ++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete ++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet ++ unsigned pktsts:4; ++ unsigned fn:4; ++ unsigned reserved25_31:7; ++ } b; ++} device_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union host_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned chnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++ unsigned pktsts:4; ++#define DWC_GRXSTS_PKTSTS_IN 0x2 ++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 ++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 ++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 ++ ++ unsigned reserved21_31:11; ++ } b; ++} host_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, ++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the d32 element ++ * then read out the bits using the bit elements. ++ */ ++typedef union fifosize_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned startaddr:16; ++ unsigned depth:16; ++ } b; ++} fifosize_data_t; ++ ++/** ++ * This union represents the bit fields in the Non-Periodic Transmit ++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union gnptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned nptxfspcavail:16; ++ unsigned nptxqspcavail:8; ++ /** Top of the Non-Periodic Transmit Request Queue ++ * - bit 24 - Terminate (Last entry for the selected ++ * channel/EP) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - IN/OUT ++ * - 2'b01 - Zero Length OUT ++ * - 2'b10 - PING/Complete Split ++ * - 2'b11 - Channel Halt ++ * - bits 30:27 - Channel/EP Number ++ */ ++ unsigned nptxqtop_terminate:1; ++ unsigned nptxqtop_token:2; ++ unsigned nptxqtop_chnep:4; ++ unsigned reserved:1; ++ } b; ++} gnptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Transmit ++ * FIFO Status Register (DTXFSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union dtxfsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned txfspcavail:16; ++ unsigned reserved:16; ++ } b; ++} dtxfsts_data_t; ++ ++/** ++ * This union represents the bit fields in the I2C Control Register ++ * (I2CCTL). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gi2cctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:8; ++ unsigned regaddr:8; ++ unsigned addr:7; ++ unsigned i2cen:1; ++ unsigned ack:1; ++ unsigned i2csuspctl:1; ++ unsigned i2cdevaddr:2; ++ unsigned i2cdatse0:1; ++ unsigned reserved:1; ++ unsigned rw:1; ++ unsigned bsydne:1; ++ } b; ++} gi2cctl_data_t; ++ ++/** ++ * This union represents the bit fields in the PHY Vendor Control Register ++ * (GPVNDCTL). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gpvndctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned regdata:8; ++ unsigned vctrl:8; ++ unsigned regaddr16_21:6; ++ unsigned regwr:1; ++ unsigned reserved23_24:2; ++ unsigned newregreq:1; ++ unsigned vstsbsy:1; ++ unsigned vstsdone:1; ++ unsigned reserved28_30:3; ++ unsigned disulpidrvr:1; ++ } b; ++} gpvndctl_data_t; ++ ++/** ++ * This union represents the bit fields in the General Purpose ++ * Input/Output Register (GGPIO). ++ * Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union ggpio_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned gpi:16; ++ unsigned gpo:16; ++ } b; ++} ggpio_data_t; ++ ++/** ++ * This union represents the bit fields in the User ID Register ++ * (GUID). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union guid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} guid_data_t; ++ ++/** ++ * This union represents the bit fields in the Synopsys ID Register ++ * (GSNPSID). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gsnpsid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} gsnpsid_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config1 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ep_dir0:2; ++ unsigned ep_dir1:2; ++ unsigned ep_dir2:2; ++ unsigned ep_dir3:2; ++ unsigned ep_dir4:2; ++ unsigned ep_dir5:2; ++ unsigned ep_dir6:2; ++ unsigned ep_dir7:2; ++ unsigned ep_dir8:2; ++ unsigned ep_dir9:2; ++ unsigned ep_dir10:2; ++ unsigned ep_dir11:2; ++ unsigned ep_dir12:2; ++ unsigned ep_dir13:2; ++ unsigned ep_dir14:2; ++ unsigned ep_dir15:2; ++ } b; ++} hwcfg1_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config2 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg2_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG2 */ ++ unsigned op_mode:3; ++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 ++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 ++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ unsigned architecture:2; ++ unsigned point2point:1; ++ unsigned hs_phy_type:2; ++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 ++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 ++ ++ unsigned fs_phy_type:2; ++ unsigned num_dev_ep:4; ++ unsigned num_host_chan:4; ++ unsigned perio_ep_supported:1; ++ unsigned dynamic_fifo:1; ++ unsigned multi_proc_int:1; ++ unsigned reserved21:1; ++ unsigned nonperio_tx_q_depth:2; ++ unsigned host_perio_tx_q_depth:2; ++ unsigned dev_token_q_depth:5; ++ unsigned otg_enable_ic_usb:1; ++ } b; ++} hwcfg2_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config3 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg3_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG3 */ ++ unsigned xfer_size_cntr_width:4; ++ unsigned packet_size_cntr_width:3; ++ unsigned otg_func:1; ++ unsigned i2c:1; ++ unsigned vendor_ctrl_if:1; ++ unsigned optional_features:1; ++ unsigned synch_reset_type:1; ++ unsigned adp_supp:1; ++ unsigned otg_enable_hsic:1; ++ unsigned bc_support:1; ++ unsigned otg_lpm_en:1; ++ unsigned dfifo_depth:16; ++ } b; ++} hwcfg3_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config4 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg4_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned num_dev_perio_in_ep:4; ++ unsigned power_optimiz:1; ++ unsigned min_ahb_freq:1; ++ unsigned hiber:1; ++ unsigned xhiber:1; ++ unsigned reserved:6; ++ unsigned utmi_phy_data_width:2; ++ unsigned num_dev_mode_ctrl_ep:4; ++ unsigned iddig_filt_en:1; ++ unsigned vbus_valid_filt_en:1; ++ unsigned a_valid_filt_en:1; ++ unsigned b_valid_filt_en:1; ++ unsigned session_end_filt_en:1; ++ unsigned ded_fifo_en:1; ++ unsigned num_in_eps:4; ++ unsigned desc_dma:1; ++ unsigned desc_dma_dyn:1; ++ } b; ++} hwcfg4_data_t; ++ ++/** ++ * This union represents the bit fields of the Core LPM Configuration ++ * Register (GLPMCFG). Set the bits using bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union glpmctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** LPM-Capable (LPMCap) (Device and Host) ++ * The application uses this bit to control ++ * the DWC_otg core LPM capabilities. ++ */ ++ unsigned lpm_cap_en:1; ++ /** LPM response programmed by application (AppL1Res) (Device) ++ * Handshake response to LPM token pre-programmed ++ * by device application software. ++ */ ++ unsigned appl_resp:1; ++ /** Host Initiated Resume Duration (HIRD) (Device and Host) ++ * In Host mode this field indicates the value of HIRD ++ * to be sent in an LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token HIRD bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned hird:4; ++ /** RemoteWakeEnable (bRemoteWake) (Device and Host) ++ * In Host mode this bit indicates the value of remote ++ * wake up to be sent in wIndex field of LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token bRemoteWake bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned rem_wkup_en:1; ++ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) ++ * The application uses this bit to control ++ * the utmi_sleep_n assertion to the PHY when in L1 state. ++ */ ++ unsigned en_utmi_sleep:1; ++ /** HIRD Threshold (HIRD_Thres) (Device and Host) ++ */ ++ unsigned hird_thres:5; ++ /** LPM Response (CoreL1Res) (Device and Host) ++ * In Host mode this bit contains handsake response to ++ * LPM transaction. ++ * In Device mode the response of the core to ++ * LPM transaction received is reflected in these two bits. ++ - 0x0 : ERROR (No handshake response) ++ - 0x1 : STALL ++ - 0x2 : NYET ++ - 0x3 : ACK ++ */ ++ unsigned lpm_resp:2; ++ /** Port Sleep Status (SlpSts) (Device and Host) ++ * This bit is set as long as a Sleep condition ++ * is present on the USB bus. ++ */ ++ unsigned prt_sleep_sts:1; ++ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) ++ * Indicates that the application or host ++ * can start resume from Sleep state. ++ */ ++ unsigned sleep_state_resumeok:1; ++ /** LPM channel Index (LPM_Chnl_Indx) (Host) ++ * The channel number on which the LPM transaction ++ * has to be applied while sending ++ * an LPM transaction to the local device. ++ */ ++ unsigned lpm_chan_index:4; ++ /** LPM Retry Count (LPM_Retry_Cnt) (Host) ++ * Number host retries that would be performed ++ * if the device response was not valid response. ++ */ ++ unsigned retry_count:3; ++ /** Send LPM Transaction (SndLPM) (Host) ++ * When set by application software, ++ * an LPM transaction containing two tokens ++ * is sent. ++ */ ++ unsigned send_lpm:1; ++ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) ++ * Number of LPM Host Retries still remaining ++ * to be transmitted for the current LPM sequence ++ */ ++ unsigned retry_count_sts:3; ++ unsigned reserved28_29:2; ++ /** In host mode once this bit is set, the host ++ * configures to drive the HSIC Idle state on the bus. ++ * It then waits for the device to initiate the Connect sequence. ++ * In device mode once this bit is set, the device waits for ++ * the HSIC Idle line state on the bus. Upon receving the Idle ++ * line state, it initiates the HSIC Connect sequence. ++ */ ++ unsigned hsic_connect:1; ++ /** This bit overrides and functionally inverts ++ * the if_select_hsic input port signal. ++ */ ++ unsigned inv_sel_hsic:1; ++ } b; ++} glpmcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core ADP Timer, Control and ++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union adpctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Probe Discharge (PRB_DSCHG) ++ * These bits set the times for TADP_DSCHG. ++ * These bits are defined as follows: ++ * 2'b00 - 4 msec ++ * 2'b01 - 8 msec ++ * 2'b10 - 16 msec ++ * 2'b11 - 32 msec ++ */ ++ unsigned prb_dschg:2; ++ /** Probe Delta (PRB_DELTA) ++ * These bits set the resolution for RTIM value. ++ * The bits are defined in units of 32 kHz clock cycles as follows: ++ * 2'b00 - 1 cycles ++ * 2'b01 - 2 cycles ++ * 2'b10 - 3 cycles ++ * 2'b11 - 4 cycles ++ * For example if this value is chosen to 2'b01, it means that RTIM ++ * increments for every 3(three) 32Khz clock cycles. ++ */ ++ unsigned prb_delta:2; ++ /** Probe Period (PRB_PER) ++ * These bits sets the TADP_PRD as shown in Figure 4 as follows: ++ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec) ++ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec) ++ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec) ++ * 2'b11 - Reserved ++ */ ++ unsigned prb_per:2; ++ /** These bits capture the latest time it took for VBUS to ramp from ++ * VADP_SINK to VADP_PRB. ++ * 0x000 - 1 cycles ++ * 0x001 - 2 cycles ++ * 0x002 - 3 cycles ++ * etc ++ * 0x7FF - 2048 cycles ++ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec. ++ */ ++ unsigned rtim:11; ++ /** Enable Probe (EnaPrb) ++ * When programmed to 1'b1, the core performs a probe operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enaprb:1; ++ /** Enable Sense (EnaSns) ++ * When programmed to 1'b1, the core performs a Sense operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enasns:1; ++ /** ADP Reset (ADPRes) ++ * When set, ADP controller is reset. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpres:1; ++ /** ADP Enable (ADPEn) ++ * When set, the core performs either ADP probing or sensing ++ * based on EnaPrb or EnaSns. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpen:1; ++ /** ADP Probe Interrupt (ADP_PRB_INT) ++ * When this bit is set, it means that the VBUS ++ * voltage is greater than VADP_PRB or VADP_PRB is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int:1; ++ /** ++ * ADP Sense Interrupt (ADP_SNS_INT) ++ * When this bit is set, it means that the VBUS voltage is greater than ++ * VADP_SNS value or VADP_SNS is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int:1; ++ /** ADP Tomeout Interrupt (ADP_TMOUT_INT) ++ * This bit is relevant only for an ADP probe. ++ * When this bit is set, it means that the ramp time has ++ * completed ie ADPCTL.RTIM has reached its terminal value ++ * of 0x7FF. This is a debug feature that allows software ++ * to read the ramp time after each cycle. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int:1; ++ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int_msk:1; ++ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int_msk:1; ++ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int_msk:1; ++ /** Access Request ++ * 2'b00 - Read/Write Valid (updated by the core) ++ * 2'b01 - Read ++ * 2'b00 - Write ++ * 2'b00 - Reserved ++ */ ++ unsigned ar:2; ++ /** Reserved */ ++ unsigned reserved29_31:3; ++ } b; ++} adpctl_data_t; ++ ++//////////////////////////////////////////// ++// Device Registers ++/** ++ * Device Global Registers. Offsets 800h-BFFh ++ * ++ * The following structures define the size and relative field offsets ++ * for the Device Mode Registers. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_global_regs { ++ /** Device Configuration Register. Offset 800h */ ++ volatile uint32_t dcfg; ++ /** Device Control Register. Offset: 804h */ ++ volatile uint32_t dctl; ++ /** Device Status Register (Read Only). Offset: 808h */ ++ volatile uint32_t dsts; ++ /** Reserved. Offset: 80Ch */ ++ uint32_t unused; ++ /** Device IN Endpoint Common Interrupt Mask ++ * Register. Offset: 810h */ ++ volatile uint32_t diepmsk; ++ /** Device OUT Endpoint Common Interrupt Mask ++ * Register. Offset: 814h */ ++ volatile uint32_t doepmsk; ++ /** Device All Endpoints Interrupt Register. Offset: 818h */ ++ volatile uint32_t daint; ++ /** Device All Endpoints Interrupt Mask Register. Offset: ++ * 81Ch */ ++ volatile uint32_t daintmsk; ++ /** Device IN Token Queue Read Register-1 (Read Only). ++ * Offset: 820h */ ++ volatile uint32_t dtknqr1; ++ /** Device IN Token Queue Read Register-2 (Read Only). ++ * Offset: 824h */ ++ volatile uint32_t dtknqr2; ++ /** Device VBUS discharge Register. Offset: 828h */ ++ volatile uint32_t dvbusdis; ++ /** Device VBUS Pulse Register. Offset: 82Ch */ ++ volatile uint32_t dvbuspulse; ++ /** Device IN Token Queue Read Register-3 (Read Only). / ++ * Device Thresholding control register (Read/Write) ++ * Offset: 830h */ ++ volatile uint32_t dtknqr3_dthrctl; ++ /** Device IN Token Queue Read Register-4 (Read Only). / ++ * Device IN EPs empty Inr. Mask Register (Read/Write) ++ * Offset: 834h */ ++ volatile uint32_t dtknqr4_fifoemptymsk; ++ /** Device Each Endpoint Interrupt Register (Read Only). / ++ * Offset: 838h */ ++ volatile uint32_t deachint; ++ /** Device Each Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 83Ch */ ++ volatile uint32_t deachintmsk; ++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 840h */ ++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; ++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 880h */ ++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; ++} dwc_otg_device_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device Configuration ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. Write the ++ * d32 member to the dcfg register. ++ */ ++typedef union dcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Device Speed */ ++ unsigned devspd:2; ++ /** Non Zero Length Status OUT Handshake */ ++ unsigned nzstsouthshk:1; ++#define DWC_DCFG_SEND_STALL 1 ++ ++ unsigned ena32khzs:1; ++ /** Device Addresses */ ++ unsigned devaddr:7; ++ /** Periodic Frame Interval */ ++ unsigned perfrint:2; ++#define DWC_DCFG_FRAME_INTERVAL_80 0 ++#define DWC_DCFG_FRAME_INTERVAL_85 1 ++#define DWC_DCFG_FRAME_INTERVAL_90 2 ++#define DWC_DCFG_FRAME_INTERVAL_95 3 ++ ++ /** Enable Device OUT NAK for bulk in DDMA mode */ ++ unsigned endevoutnak:1; ++ ++ unsigned reserved14_17:4; ++ /** In Endpoint Mis-match count */ ++ unsigned epmscnt:5; ++ /** Enable Descriptor DMA in Device mode */ ++ unsigned descdma:1; ++ unsigned perschintvl:2; ++ unsigned resvalid:6; ++ } b; ++} dcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Remote Wakeup */ ++ unsigned rmtwkupsig:1; ++ /** Soft Disconnect */ ++ unsigned sftdiscon:1; ++ /** Global Non-Periodic IN NAK Status */ ++ unsigned gnpinnaksts:1; ++ /** Global OUT NAK Status */ ++ unsigned goutnaksts:1; ++ /** Test Control */ ++ unsigned tstctl:3; ++ /** Set Global Non-Periodic IN NAK */ ++ unsigned sgnpinnak:1; ++ /** Clear Global Non-Periodic IN NAK */ ++ unsigned cgnpinnak:1; ++ /** Set Global OUT NAK */ ++ unsigned sgoutnak:1; ++ /** Clear Global OUT NAK */ ++ unsigned cgoutnak:1; ++ /** Power-On Programming Done */ ++ unsigned pwronprgdone:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Global Multi Count */ ++ unsigned gmc:2; ++ /** Ignore Frame Number for ISOC EPs */ ++ unsigned ifrmnum:1; ++ /** NAK on Babble */ ++ unsigned nakonbble:1; ++ /** Enable Continue on BNA */ ++ unsigned encontonbna:1; ++ ++ unsigned reserved18_31:14; ++ } b; ++} dctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Status ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Suspend Status */ ++ unsigned suspsts:1; ++ /** Enumerated Speed */ ++ unsigned enumspd:2; ++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 ++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 ++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 ++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 ++ /** Erratic Error */ ++ unsigned errticerr:1; ++ unsigned reserved4_7:4; ++ /** Frame or Microframe Number of the received SOF */ ++ unsigned soffn:14; ++ unsigned reserved22_31:10; ++ } b; ++} dsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP Interrupt ++ * Register and the Device IN EP Common Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union diepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete mask */ ++ unsigned xfercompl:1; ++ /** Endpoint disable mask */ ++ unsigned epdisabled:1; ++ /** AHB Error mask */ ++ unsigned ahberr:1; ++ /** TimeOUT Handshake mask (non-ISOC EPs) */ ++ unsigned timeout:1; ++ /** IN Token received with TxF Empty mask */ ++ unsigned intktxfemp:1; ++ /** IN Token Received with EP mismatch mask */ ++ unsigned intknepmis:1; ++ /** IN Endpoint NAK Effective mask */ ++ unsigned inepnakeff:1; ++ /** Reserved */ ++ unsigned emptyintr:1; ++ ++ unsigned txfifoundrn:1; ++ ++ /** BNA Interrupt mask */ ++ unsigned bna:1; ++ ++ unsigned reserved10_12:3; ++ /** BNA Interrupt mask */ ++ unsigned nak:1; ++ ++ unsigned reserved14_31:18; ++ } b; ++} diepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union diepint_data diepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP Interrupt ++ * Registerand Device OUT EP Common Interrupt Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union doepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete */ ++ unsigned xfercompl:1; ++ /** Endpoint disable */ ++ unsigned epdisabled:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** Setup Phase Done (contorl EPs) */ ++ unsigned setup:1; ++ /** OUT Token Received when Endpoint Disabled */ ++ unsigned outtknepdis:1; ++ ++ unsigned stsphsercvd:1; ++ /** Back-to-Back SETUP Packets Received */ ++ unsigned back2backsetup:1; ++ ++ unsigned reserved7:1; ++ /** OUT packet Error */ ++ unsigned outpkterr:1; ++ /** BNA Interrupt */ ++ unsigned bna:1; ++ ++ unsigned reserved10:1; ++ /** Packet Drop Status */ ++ unsigned pktdrpsts:1; ++ /** Babble Interrupt */ ++ unsigned babble:1; ++ /** NAK Interrupt */ ++ unsigned nak:1; ++ /** NYET Interrupt */ ++ unsigned nyet:1; ++ /** Bit indicating setup packet received */ ++ unsigned sr:1; ++ ++ unsigned reserved16_31:16; ++ } b; ++} doepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union doepint_data doepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device All EP Interrupt ++ * and Mask Registers. ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union daint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** IN Endpoint bits */ ++ unsigned in:16; ++ /** OUT Endpoint bits */ ++ unsigned out:16; ++ } ep; ++ struct { ++ /** IN Endpoint bits */ ++ unsigned inep0:1; ++ unsigned inep1:1; ++ unsigned inep2:1; ++ unsigned inep3:1; ++ unsigned inep4:1; ++ unsigned inep5:1; ++ unsigned inep6:1; ++ unsigned inep7:1; ++ unsigned inep8:1; ++ unsigned inep9:1; ++ unsigned inep10:1; ++ unsigned inep11:1; ++ unsigned inep12:1; ++ unsigned inep13:1; ++ unsigned inep14:1; ++ unsigned inep15:1; ++ /** OUT Endpoint bits */ ++ unsigned outep0:1; ++ unsigned outep1:1; ++ unsigned outep2:1; ++ unsigned outep3:1; ++ unsigned outep4:1; ++ unsigned outep5:1; ++ unsigned outep6:1; ++ unsigned outep7:1; ++ unsigned outep8:1; ++ unsigned outep9:1; ++ unsigned outep10:1; ++ unsigned outep11:1; ++ unsigned outep12:1; ++ unsigned outep13:1; ++ unsigned outep14:1; ++ unsigned outep15:1; ++ } b; ++} daint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN Token Queue ++ * Read Registers. ++ * - Read the register into the d32 member. ++ * - READ-ONLY Register ++ */ ++typedef union dtknq1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** In Token Queue Write Pointer */ ++ unsigned intknwptr:5; ++ /** Reserved */ ++ unsigned reserved05_06:2; ++ /** write pointer has wrapped. */ ++ unsigned wrap_bit:1; ++ /** EP Numbers of IN Tokens 0 ... 4 */ ++ unsigned epnums0_5:24; ++ } b; ++} dtknq1_data_t; ++ ++/** ++ * This union represents Threshold control Register ++ * - Read and write the register into the d32 member. ++ * - READ-WRITABLE Register ++ */ ++typedef union dthrctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** non ISO Tx Thr. Enable */ ++ unsigned non_iso_thr_en:1; ++ /** ISO Tx Thr. Enable */ ++ unsigned iso_thr_en:1; ++ /** Tx Thr. Length */ ++ unsigned tx_thr_len:9; ++ /** AHB Threshold ratio */ ++ unsigned ahb_thr_ratio:2; ++ /** Reserved */ ++ unsigned reserved13_15:3; ++ /** Rx Thr. Enable */ ++ unsigned rx_thr_en:1; ++ /** Rx Thr. Length */ ++ unsigned rx_thr_len:9; ++ unsigned reserved26:1; ++ /** Arbiter Parking Enable*/ ++ unsigned arbprken:1; ++ /** Reserved */ ++ unsigned reserved28_31:4; ++ } b; ++} dthrctl_data_t; ++ ++/** ++ * Device Logical IN Endpoint-Specific Registers. Offsets ++ * 900h-AFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_in_ep_regs { ++ /** Device IN Endpoint Control Register. Offset:900h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t diepctl; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 04h */ ++ uint32_t reserved04; ++ /** Device IN Endpoint Interrupt Register. Offset:900h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t diepint; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device IN Endpoint Transfer Size ++ * Register. Offset:900h + (ep_num * 20h) + 10h */ ++ volatile uint32_t dieptsiz; ++ /** Device IN Endpoint DMA Address Register. Offset:900h + ++ * (ep_num * 20h) + 14h */ ++ volatile uint32_t diepdma; ++ /** Device IN Endpoint Transmit FIFO Status Register. Offset:900h + ++ * (ep_num * 20h) + 18h */ ++ volatile uint32_t dtxfsts; ++ /** Device IN Endpoint DMA Buffer Register. Offset:900h + ++ * (ep_num * 20h) + 1Ch */ ++ volatile uint32_t diepdmab; ++} dwc_otg_dev_in_ep_regs_t; ++ ++/** ++ * Device Logical OUT Endpoint-Specific Registers. Offsets: ++ * B00h-CFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_out_ep_regs { ++ /** Device OUT Endpoint Control Register. Offset:B00h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t doepctl; ++ /** Reserved. Offset:B00h + (ep_num * 20h) + 04h */ ++ uint32_t reserved04; ++ /** Device OUT Endpoint Interrupt Register. Offset:B00h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t doepint; ++ /** Reserved. Offset:B00h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device OUT Endpoint Transfer Size Register. Offset: ++ * B00h + (ep_num * 20h) + 10h */ ++ volatile uint32_t doeptsiz; ++ /** Device OUT Endpoint DMA Address Register. Offset:B00h ++ * + (ep_num * 20h) + 14h */ ++ volatile uint32_t doepdma; ++ /** Reserved. Offset:B00h + * (ep_num * 20h) + 18h */ ++ uint32_t unused; ++ /** Device OUT Endpoint DMA Buffer Register. Offset:B00h ++ * + (ep_num * 20h) + 1Ch */ ++ uint32_t doepdmab; ++} dwc_otg_dev_out_ep_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union depctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Maximum Packet Size ++ * IN/OUT EPn ++ * IN/OUT EP0 - 2 bits ++ * 2'b00: 64 Bytes ++ * 2'b01: 32 ++ * 2'b10: 16 ++ * 2'b11: 8 */ ++ unsigned mps:11; ++#define DWC_DEP0CTL_MPS_64 0 ++#define DWC_DEP0CTL_MPS_32 1 ++#define DWC_DEP0CTL_MPS_16 2 ++#define DWC_DEP0CTL_MPS_8 3 ++ ++ /** Next Endpoint ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned nextep:4; ++ ++ /** USB Active Endpoint */ ++ unsigned usbactep:1; ++ ++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) ++ * This field contains the PID of the packet going to ++ * be received or transmitted on this endpoint. The ++ * application should program the PID of the first ++ * packet going to be received or transmitted on this ++ * endpoint , after the endpoint is ++ * activated. Application use the SetD1PID and ++ * SetD0PID fields of this register to program either ++ * D0 or D1 PID. ++ * ++ * The encoding for this field is ++ * - 0: D0 ++ * - 1: D1 ++ */ ++ unsigned dpid:1; ++ ++ /** NAK Status */ ++ unsigned naksts:1; ++ ++ /** Endpoint Type ++ * 2'b00: Control ++ * 2'b01: Isochronous ++ * 2'b10: Bulk ++ * 2'b11: Interrupt */ ++ unsigned eptype:2; ++ ++ /** Snoop Mode ++ * OUT EPn/OUT EP0 ++ * IN EPn/IN EP0 - reserved */ ++ unsigned snp:1; ++ ++ /** Stall Handshake */ ++ unsigned stall:1; ++ ++ /** Tx Fifo Number ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned txfnum:4; ++ ++ /** Clear NAK */ ++ unsigned cnak:1; ++ /** Set NAK */ ++ unsigned snak:1; ++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA0. Set Even ++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to even (micro) ++ * frame. ++ */ ++ unsigned setd0pid:1; ++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA1 Set Odd ++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to odd (micro) frame. ++ */ ++ unsigned setd1pid:1; ++ ++ /** Endpoint Disable */ ++ unsigned epdis:1; ++ /** Endpoint Enable */ ++ unsigned epena:1; ++ } b; ++} depctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:19; ++/** Max packet count for EP (pow(2,10)-1) */ ++#define MAX_PKT_CNT 1023 ++ /** Packet Count */ ++ unsigned pktcnt:10; ++ /** Multi Count - Periodic IN endpoints */ ++ unsigned mc:2; ++ unsigned reserved:1; ++ } b; ++} deptsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP 0 Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:7; ++ /** Reserved */ ++ unsigned reserved7_18:12; ++ /** Packet Count */ ++ unsigned pktcnt:2; ++ /** Reserved */ ++ unsigned reserved21_28:8; ++ /**Setup Packet Count (DOEPTSIZ0 Only) */ ++ unsigned supcnt:2; ++ unsigned reserved31; ++ } b; ++} deptsiz0_data_t; ++ ++///////////////////////////////////////////////// ++// DMA Descriptor Specific Structures ++// ++ ++/** Buffer status definitions */ ++ ++#define BS_HOST_READY 0x0 ++#define BS_DMA_BUSY 0x1 ++#define BS_DMA_DONE 0x2 ++#define BS_HOST_BUSY 0x3 ++ ++/** Receive/Transmit status definitions */ ++ ++#define RTS_SUCCESS 0x0 ++#define RTS_BUFFLUSH 0x1 ++#define RTS_RESERVED 0x2 ++#define RTS_BUFERR 0x3 ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit, b_iso_out and ++ * b_iso_in elements. ++ */ ++typedef union dev_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned bytes:16; ++ /** NAK bit - only for OUT EPs */ ++ unsigned nak:1; ++ unsigned reserved17_22:6; ++ /** Multiple Transfer - only for OUT EPs */ ++ unsigned mtrf:1; ++ /** Setup Packet received - only for OUT EPs */ ++ unsigned sr:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned sts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b; ++ ++//#ifdef DWC_EN_ISOC ++ /** iso out quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned rxbytes:11; ++ ++ unsigned reserved11:1; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Received ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned rxsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_out; ++ ++ /** iso in quadlet bits */ ++ struct { ++ /** Transmited number of bytes */ ++ unsigned txbytes:12; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Transmited ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Transmit Status */ ++ unsigned txsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_in; ++//#endif /* DWC_EN_ISOC */ ++} dev_dma_desc_sts_t; ++ ++/** ++ * DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_dev_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ dev_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_dev_dma_desc_t; ++ ++/** ++ * The dwc_otg_dev_if structure contains information needed to manage ++ * the DWC_otg controller acting in device mode. It represents the ++ * programming view of the device-specific aspects of the controller. ++ */ ++typedef struct dwc_otg_dev_if { ++ /** Pointer to device Global registers. ++ * Device Global Registers starting at offset 800h ++ */ ++ dwc_otg_device_global_regs_t *dev_global_regs; ++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 ++ ++ /** ++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh ++ */ ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_IN_EP_REG_OFFSET 0x900 ++#define DWC_EP_REG_OFFSET 0x20 ++ ++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 ++ ++ /* Device configuration information */ ++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ ++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ ++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ ++ ++ /** Size of periodic FIFOs (Bytes) */ ++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Size of Tx FIFOs (Bytes) */ ++ uint16_t tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flags and length varaiables **/ ++ uint16_t rx_thr_en; ++ uint16_t iso_tx_thr_en; ++ uint16_t non_iso_tx_thr_en; ++ ++ uint16_t rx_thr_length; ++ uint16_t tx_thr_length; ++ ++ /** ++ * Pointers to the DMA Descriptors for EP0 Control ++ * transfers (virtual and physical) ++ */ ++ ++ /** 2 descriptors for SETUP packets */ ++ dwc_dma_t dma_setup_desc_addr[2]; ++ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; ++ ++ /** Pointer to Descriptor with latest SETUP packet */ ++ dwc_otg_dev_dma_desc_t *psetup; ++ ++ /** Index of current SETUP handler descriptor */ ++ uint32_t setup_desc_index; ++ ++ /** Descriptor for Data In or Status In phases */ ++ dwc_dma_t dma_in_desc_addr; ++ dwc_otg_dev_dma_desc_t *in_desc_addr; ++ ++ /** Descriptor for Data Out or Status Out phases */ ++ dwc_dma_t dma_out_desc_addr; ++ dwc_otg_dev_dma_desc_t *out_desc_addr; ++ ++ /** Setup Packet Detected - if set clear NAK when queueing */ ++ uint32_t spd; ++ /** Isoc ep pointer on which incomplete happens */ ++ void *isoc_ep; ++ ++} dwc_otg_dev_if_t; ++ ++///////////////////////////////////////////////// ++// Host Mode Register Structures ++// ++/** ++ * The Host Global Registers structure defines the size and relative ++ * field offsets for the Host Mode Global Registers. Host Global ++ * Registers offsets 400h-7FFh. ++*/ ++typedef struct dwc_otg_host_global_regs { ++ /** Host Configuration Register. Offset: 400h */ ++ volatile uint32_t hcfg; ++ /** Host Frame Interval Register. Offset: 404h */ ++ volatile uint32_t hfir; ++ /** Host Frame Number / Frame Remaining Register. Offset: 408h */ ++ volatile uint32_t hfnum; ++ /** Reserved. Offset: 40Ch */ ++ uint32_t reserved40C; ++ /** Host Periodic Transmit FIFO/ Queue Status Register. Offset: 410h */ ++ volatile uint32_t hptxsts; ++ /** Host All Channels Interrupt Register. Offset: 414h */ ++ volatile uint32_t haint; ++ /** Host All Channels Interrupt Mask Register. Offset: 418h */ ++ volatile uint32_t haintmsk; ++ /** Host Frame List Base Address Register . Offset: 41Ch */ ++ volatile uint32_t hflbaddr; ++} dwc_otg_host_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Configuration Register. ++ * Read the register into the d32 member then set/clear the bits using ++ * the bit elements. Write the d32 member to the hcfg register. ++ */ ++typedef union hcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** FS/LS Phy Clock Select */ ++ unsigned fslspclksel:2; ++#define DWC_HCFG_30_60_MHZ 0 ++#define DWC_HCFG_48_MHZ 1 ++#define DWC_HCFG_6_MHZ 2 ++ ++ /** FS/LS Only Support */ ++ unsigned fslssupp:1; ++ unsigned reserved3_6:4; ++ /** Enable 32-KHz Suspend Mode */ ++ unsigned ena32khzs:1; ++ /** Resume Validation Periiod */ ++ unsigned resvalid:8; ++ unsigned reserved16_22:7; ++ /** Enable Scatter/gather DMA in Host mode */ ++ unsigned descdma:1; ++ /** Frame List Entries */ ++ unsigned frlisten:2; ++ /** Enable Periodic Scheduling */ ++ unsigned perschedena:1; ++ unsigned reserved27_30:4; ++ unsigned modechtimen:1; ++ } b; ++} hcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfir_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frint:16; ++ unsigned hfirrldctrl:1; ++ unsigned reserved:15; ++ } b; ++} hfir_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfnum_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frnum:16; ++#define DWC_HFNUM_MAX_FRNUM 0x3FFF ++ unsigned frrem:16; ++ } b; ++} hfnum_data_t; ++ ++typedef union hptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned ptxfspcavail:16; ++ unsigned ptxqspcavail:8; ++ /** Top of the Periodic Transmit Request Queue ++ * - bit 24 - Terminate (last entry for the selected channel) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - Zero length ++ * - 2'b01 - Ping ++ * - 2'b10 - Disable ++ * - bits 30:27 - Channel Number ++ * - bit 31 - Odd/even microframe ++ */ ++ unsigned ptxqtop_terminate:1; ++ unsigned ptxqtop_token:2; ++ unsigned ptxqtop_chnum:4; ++ unsigned ptxqtop_odd:1; ++ } b; ++} hptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Port Control and Status ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hprt0 register. ++ */ ++typedef union hprt0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned prtconnsts:1; ++ unsigned prtconndet:1; ++ unsigned prtena:1; ++ unsigned prtenchng:1; ++ unsigned prtovrcurract:1; ++ unsigned prtovrcurrchng:1; ++ unsigned prtres:1; ++ unsigned prtsusp:1; ++ unsigned prtrst:1; ++ unsigned reserved9:1; ++ unsigned prtlnsts:2; ++ unsigned prtpwr:1; ++ unsigned prttstctl:4; ++ unsigned prtspd:2; ++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 ++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 ++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 ++ unsigned reserved19_31:13; ++ } b; ++} hprt0_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haintmsk_data_t; ++ ++/** ++ * Host Channel Specific Registers. 500h-5FCh ++ */ ++typedef struct dwc_otg_hc_regs { ++ /** Host Channel 0 Characteristic Register. Offset: 500h + (chan_num * 20h) + 00h */ ++ volatile uint32_t hcchar; ++ /** Host Channel 0 Split Control Register. Offset: 500h + (chan_num * 20h) + 04h */ ++ volatile uint32_t hcsplt; ++ /** Host Channel 0 Interrupt Register. Offset: 500h + (chan_num * 20h) + 08h */ ++ volatile uint32_t hcint; ++ /** Host Channel 0 Interrupt Mask Register. Offset: 500h + (chan_num * 20h) + 0Ch */ ++ volatile uint32_t hcintmsk; ++ /** Host Channel 0 Transfer Size Register. Offset: 500h + (chan_num * 20h) + 10h */ ++ volatile uint32_t hctsiz; ++ /** Host Channel 0 DMA Address Register. Offset: 500h + (chan_num * 20h) + 14h */ ++ volatile uint32_t hcdma; ++ volatile uint32_t reserved; ++ /** Host Channel 0 DMA Buffer Address Register. Offset: 500h + (chan_num * 20h) + 1Ch */ ++ volatile uint32_t hcdmab; ++} dwc_otg_hc_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Characteristics ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++typedef union hcchar_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Maximum packet size in bytes */ ++ unsigned mps:11; ++ ++ /** Endpoint number */ ++ unsigned epnum:4; ++ ++ /** 0: OUT, 1: IN */ ++ unsigned epdir:1; ++ ++ unsigned reserved:1; ++ ++ /** 0: Full/high speed device, 1: Low speed device */ ++ unsigned lspddev:1; ++ ++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ ++ unsigned eptype:2; ++ ++ /** Packets per frame for periodic transfers. 0 is reserved. */ ++ unsigned multicnt:2; ++ ++ /** Device address */ ++ unsigned devaddr:7; ++ ++ /** ++ * Frame to transmit periodic transaction. ++ * 0: even, 1: odd ++ */ ++ unsigned oddfrm:1; ++ ++ /** Channel disable */ ++ unsigned chdis:1; ++ ++ /** Channel enable */ ++ unsigned chen:1; ++ } b; ++} hcchar_data_t; ++ ++typedef union hcsplt_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Port Address */ ++ unsigned prtaddr:7; ++ ++ /** Hub Address */ ++ unsigned hubaddr:7; ++ ++ /** Transaction Position */ ++ unsigned xactpos:2; ++#define DWC_HCSPLIT_XACTPOS_MID 0 ++#define DWC_HCSPLIT_XACTPOS_END 1 ++#define DWC_HCSPLIT_XACTPOS_BEGIN 2 ++#define DWC_HCSPLIT_XACTPOS_ALL 3 ++ ++ /** Do Complete Split */ ++ unsigned compsplt:1; ++ ++ /** Reserved */ ++ unsigned reserved:14; ++ ++ /** Split Enble */ ++ unsigned spltena:1; ++ } b; ++} hcsplt_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union hcint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer Complete */ ++ unsigned xfercomp:1; ++ /** Channel Halted */ ++ unsigned chhltd:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** STALL Response Received */ ++ unsigned stall:1; ++ /** NAK Response Received */ ++ unsigned nak:1; ++ /** ACK Response Received */ ++ unsigned ack:1; ++ /** NYET Response Received */ ++ unsigned nyet:1; ++ /** Transaction Err */ ++ unsigned xacterr:1; ++ /** Babble Error */ ++ unsigned bblerr:1; ++ /** Frame Overrun */ ++ unsigned frmovrun:1; ++ /** Data Toggle Error */ ++ unsigned datatglerr:1; ++ /** Buffer Not Available (only for DDMA mode) */ ++ unsigned bna:1; ++ /** Exessive transaction error (only for DDMA mode) */ ++ unsigned xcs_xact:1; ++ /** Frame List Rollover interrupt */ ++ unsigned frm_list_roll:1; ++ /** Reserved */ ++ unsigned reserved14_31:18; ++ } b; ++} hcint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Interrupt Mask ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcintmsk register. ++ */ ++typedef union hcintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned xfercompl:1; ++ unsigned chhltd:1; ++ unsigned ahberr:1; ++ unsigned stall:1; ++ unsigned nak:1; ++ unsigned ack:1; ++ unsigned nyet:1; ++ unsigned xacterr:1; ++ unsigned bblerr:1; ++ unsigned frmovrun:1; ++ unsigned datatglerr:1; ++ unsigned bna:1; ++ unsigned xcs_xact:1; ++ unsigned frm_list_roll:1; ++ unsigned reserved14_31:18; ++ } b; ++} hcintmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Transfer Size ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++ ++typedef union hctsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Total transfer size in bytes */ ++ unsigned xfersize:19; ++ ++ /** Data packets to transfer */ ++ unsigned pktcnt:10; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control), SETUP (Control) ++ */ ++ unsigned pid:2; ++#define DWC_HCTSIZ_DATA0 0 ++#define DWC_HCTSIZ_DATA1 2 ++#define DWC_HCTSIZ_DATA2 1 ++#define DWC_HCTSIZ_MDATA 3 ++#define DWC_HCTSIZ_SETUP 3 ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b; ++ ++ /** register bits */ ++ struct { ++ /** Scheduling information */ ++ unsigned schinfo:8; ++ ++ /** Number of transfer descriptors. ++ * Max value: ++ * 64 in general, ++ * 256 only for HS isochronous endpoint. ++ */ ++ unsigned ntd:8; ++ ++ /** Data packets to transfer */ ++ unsigned reserved16_28:13; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control) ++ */ ++ unsigned pid:2; ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b_ddma; ++} hctsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Host DMA Address ++ * Register used in Descriptor DMA mode. ++ */ ++typedef union hcdma_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0_2:3; ++ /** Current Transfer Descriptor. Not used for ISOC */ ++ unsigned ctd:8; ++ /** Start Address of Descriptor List */ ++ unsigned dma_addr:21; ++ } b; ++} hcdma_data_t; ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet for host mode. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union host_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ ++ /* for non-isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:17; ++ /** QTD offset to jump when Short Packet received - only for IN EPs */ ++ unsigned qtd_offset:6; ++ /** ++ * Set to request the core to jump to alternate QTD if ++ * Short Packet received - only for IN EPs ++ */ ++ unsigned a_qtd:1; ++ /** ++ * Setup Packet bit. When set indicates that buffer contains ++ * setup packet. ++ */ ++ unsigned sup:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** End of List */ ++ unsigned eol:1; ++ unsigned reserved27:1; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++#define DMA_DESC_STS_PKTERR 1 ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b; ++ /* for isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:12; ++ unsigned reserved12_24:13; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ unsigned reserved26_27:2; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b_isoc; ++} host_dma_desc_sts_t; ++ ++#define MAX_DMA_DESC_SIZE 131071 ++#define MAX_DMA_DESC_NUM_GENERIC 64 ++#define MAX_DMA_DESC_NUM_HS_ISOC 256 ++#define MAX_FRLIST_EN_NUM 64 ++/** ++ * Host-mode DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_host_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ host_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_host_dma_desc_t; ++ ++/** OTG Host Interface Structure. ++ * ++ * The OTG Host Interface Structure structure contains information ++ * needed to manage the DWC_otg controller acting in host mode. It ++ * represents the programming view of the host-specific aspects of the ++ * controller. ++ */ ++typedef struct dwc_otg_host_if { ++ /** Host Global Registers starting at offset 400h.*/ ++ dwc_otg_host_global_regs_t *host_global_regs; ++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 ++ ++ /** Host Port 0 Control and Status Register */ ++ volatile uint32_t *hprt0; ++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 ++ ++ /** Host Channel Specific Registers at offsets 500h-5FCh. */ ++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; ++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 ++#define DWC_OTG_CHAN_REGS_OFFSET 0x20 ++ ++ /* Host configuration information */ ++ /** Number of Host Channels (range: 1-16) */ ++ uint8_t num_host_channels; ++ /** Periodic EPs supported (0: no, 1: yes) */ ++ uint8_t perio_eps_supported; ++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ ++ uint16_t perio_tx_fifo_size; ++ ++} dwc_otg_host_if_t; ++ ++/** ++ * This union represents the bit fields in the Power and Clock Gating Control ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union pcgcctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Stop Pclk */ ++ unsigned stoppclk:1; ++ /** Gate Hclk */ ++ unsigned gatehclk:1; ++ /** Power Clamp */ ++ unsigned pwrclmp:1; ++ /** Reset Power Down Modules */ ++ unsigned rstpdwnmodule:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ ++ unsigned enbl_sleep_gating:1; ++ /** PHY In Sleep (PhySleep) */ ++ unsigned phy_in_sleep:1; ++ /** Deep Sleep*/ ++ unsigned deep_sleep:1; ++ unsigned resetaftsusp:1; ++ unsigned restoremode:1; ++ unsigned enbl_extnd_hiber:1; ++ unsigned extnd_hiber_pwrclmp:1; ++ unsigned extnd_hiber_switch:1; ++ unsigned ess_reg_restored:1; ++ unsigned prt_clk_sel:2; ++ unsigned port_power:1; ++ unsigned max_xcvrselect:2; ++ unsigned max_termsel:1; ++ unsigned mac_dev_addr:7; ++ unsigned p2hd_dev_enum_spd:2; ++ unsigned p2hd_prt_spd:2; ++ unsigned if_dev_mode:1; ++ } b; ++} pcgcctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Data FIFO Software ++ * Configuration Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union gdfifocfg_data { ++ /* raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** OTG Data FIFO depth */ ++ unsigned gdfifocfg:16; ++ /** Start address of EP info controller */ ++ unsigned epinfobase:16; ++ } b; ++} gdfifocfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Power Down Register ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union gpwrdn_data { ++ /* raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** PMU Interrupt Select */ ++ unsigned pmuintsel:1; ++ /** PMU Active */ ++ unsigned pmuactv:1; ++ /** Restore */ ++ unsigned restore:1; ++ /** Power Down Clamp */ ++ unsigned pwrdnclmp:1; ++ /** Power Down Reset */ ++ unsigned pwrdnrstn:1; ++ /** Power Down Switch */ ++ unsigned pwrdnswtch:1; ++ /** Disable VBUS */ ++ unsigned dis_vbus:1; ++ /** Line State Change */ ++ unsigned lnstschng:1; ++ /** Line state change mask */ ++ unsigned lnstchng_msk:1; ++ /** Reset Detected */ ++ unsigned rst_det:1; ++ /** Reset Detect mask */ ++ unsigned rst_det_msk:1; ++ /** Disconnect Detected */ ++ unsigned disconn_det:1; ++ /** Disconnect Detect mask */ ++ unsigned disconn_det_msk:1; ++ /** Connect Detected*/ ++ unsigned connect_det:1; ++ /** Connect Detected Mask*/ ++ unsigned connect_det_msk:1; ++ /** SRP Detected */ ++ unsigned srp_det:1; ++ /** SRP Detect mask */ ++ unsigned srp_det_msk:1; ++ /** Status Change Interrupt */ ++ unsigned sts_chngint:1; ++ /** Status Change Interrupt Mask */ ++ unsigned sts_chngint_msk:1; ++ /** Line State */ ++ unsigned linestate:2; ++ /** Indicates current mode(status of IDDIG signal) */ ++ unsigned idsts:1; ++ /** B Session Valid signal status*/ ++ unsigned bsessvld:1; ++ /** ADP Event Detected */ ++ unsigned adp_int:1; ++ /** Multi Valued ID pin */ ++ unsigned mult_val_id_bc:5; ++ /** Reserved 24_31 */ ++ unsigned reserved29_31:3; ++ } b; ++} gpwrdn_data_t; ++ ++#endif +diff --git a/drivers/usb/host/dwc_otg/test/Makefile b/drivers/usb/host/dwc_otg/test/Makefile +new file mode 100644 +index 000000000000..fc453759dea3 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/Makefile +@@ -0,0 +1,16 @@ ++ ++PERL=/usr/bin/perl ++PL_TESTS=test_sysfs.pl test_mod_param.pl ++ ++.PHONY : test ++test : perl_tests ++ ++perl_tests : ++ @echo ++ @echo Running perl tests ++ @for test in $(PL_TESTS); do \ ++ if $(PERL) ./$$test ; then \ ++ echo "=======> $$test, PASSED" ; \ ++ else echo "=======> $$test, FAILED" ; \ ++ fi \ ++ done +diff --git a/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm +new file mode 100644 +index 000000000000..85e55fd6ddbc +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm +@@ -0,0 +1,337 @@ ++package dwc_otg_test; ++ ++use strict; ++use Exporter (); ++ ++use vars qw(@ISA @EXPORT ++$sysfsdir $paramdir $errors $params ++); ++ ++@ISA = qw(Exporter); ++ ++# ++# Globals ++# ++$sysfsdir = "/sys/devices/lm0"; ++$paramdir = "/sys/module/dwc_otg"; ++$errors = 0; ++ ++$params = [ ++ { ++ NAME => "otg_cap", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "dma_enable", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dma_burst_size", ++ DEFAULT => 32, ++ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], ++ LOW => 1, ++ HIGH => 256 ++ }, ++ { ++ NAME => "host_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_support_fs_ls_low_power", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_ls_low_power_phy_clk", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dev_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "enable_dynamic_fifo", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "data_fifo_size", ++ DEFAULT => 8192, ++ ENUM => [], ++ LOW => 32, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_rx_fifo_size", ++ DEFAULT => 1064, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_1", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_2", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_3", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_4", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_5", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_6", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_7", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_8", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_9", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_10", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_11", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_12", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_13", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_14", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_15", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "host_rx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_perio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "max_transfer_size", ++ DEFAULT => 65535, ++ ENUM => [], ++ LOW => 2047, ++ HIGH => 65535 ++ }, ++ { ++ NAME => "max_packet_count", ++ DEFAULT => 511, ++ ENUM => [], ++ LOW => 15, ++ HIGH => 511 ++ }, ++ { ++ NAME => "host_channels", ++ DEFAULT => 12, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 16 ++ }, ++ { ++ NAME => "dev_endpoints", ++ DEFAULT => 6, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 15 ++ }, ++ { ++ NAME => "phy_type", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "phy_utmi_width", ++ DEFAULT => 16, ++ ENUM => [8, 16], ++ LOW => 8, ++ HIGH => 16 ++ }, ++ { ++ NAME => "phy_ulpi_ddr", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ ]; ++ ++ ++# ++# ++sub check_arch { ++ $_ = `uname -m`; ++ chomp; ++ unless (m/armv4tl/) { ++ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub load_module { ++ my $params = shift; ++ print "\nRemoving Module\n"; ++ system "rmmod dwc_otg"; ++ print "Loading Module\n"; ++ if ($params ne "") { ++ print "Module Parameters: $params\n"; ++ } ++ if (system("modprobe dwc_otg $params")) { ++ warn "Unable to load module\n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub test_status { ++ my $arg = shift; ++ ++ print "\n"; ++ ++ if (defined $arg) { ++ warn "WARNING: $arg\n"; ++ } ++ ++ if ($errors > 0) { ++ warn "TEST FAILED with $errors errors\n"; ++ return 0; ++ } else { ++ print "TEST PASSED\n"; ++ return 0 if (defined $arg); ++ } ++ return 1; ++} ++ ++# ++# ++@EXPORT = qw( ++$sysfsdir ++$paramdir ++$params ++$errors ++check_arch ++load_module ++test_status ++); ++ ++1; +diff --git a/drivers/usb/host/dwc_otg/test/test_mod_param.pl b/drivers/usb/host/dwc_otg/test/test_mod_param.pl +new file mode 100644 +index 000000000000..dc3820df577b +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl +@@ -0,0 +1,133 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator. ++# ++# - Tests module parameter default values. ++# - Tests setting of valid module parameter values via modprobe. ++# - Tests invalid module parameter values. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($param,$expected) = @_; ++ my $value = get($param); ++ ++ if ($value == $expected) { ++ print "$param = $value, okay\n"; ++ } ++ ++ else { ++ warn "ERROR: value of $param != $expected, $value\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub get { ++ my $param = shift; ++ my $tmp = `cat $paramdir/$param`; ++ chomp $tmp; ++ return $tmp; ++} ++ ++# ++# ++sub test_main { ++ ++ print "\nTesting Module Parameters\n"; ++ ++ load_module("") or die; ++ ++ # Test initial values ++ print "\nTesting Default Values\n"; ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ # Test low value ++ print "\nTesting Low Value\n"; ++ my $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{LOW}); ++ } ++ ++ # Test high value ++ print "\nTesting High Value\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{HIGH}); ++ } ++ ++ # Test Enum ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $value); ++ } ++ } ++ } ++ ++ # Test Invalid Values ++ print "\nTesting Invalid Values\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $value = $value + 1; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ $value = $value - 2; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ } ++ } ++ ++ test_status() or die; ++} ++ ++test_main(); ++0; +diff --git a/drivers/usb/host/dwc_otg/test/test_sysfs.pl b/drivers/usb/host/dwc_otg/test/test_sysfs.pl +new file mode 100644 +index 000000000000..cdc9963176e5 +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl +@@ -0,0 +1,193 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator ++# - Tests select sysfs attributes. ++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($attr,$expected) = @_; ++ my $string = get($attr); ++ ++ if ($string eq $expected) { ++ printf("$attr = $string, okay\n"); ++ } ++ else { ++ warn "ERROR: value of $attr != $expected, $string\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub set { ++ my ($reg, $value) = @_; ++ system "echo $value > $sysfsdir/$reg"; ++} ++ ++# ++# ++sub get { ++ my $attr = shift; ++ my $string = `cat $sysfsdir/$attr`; ++ chomp $string; ++ if ($string =~ m/\s\=\s/) { ++ my $tmp; ++ ($tmp, $string) = split /\s=\s/, $string; ++ } ++ return $string; ++} ++ ++# ++# ++sub test_main { ++ print("\nTesting Sysfs Attributes\n"); ++ ++ load_module("") or die; ++ ++ # Test initial values of regoffset/regvalue/guid/gsnpsid ++ print("\nTesting Default Values\n"); ++ ++ test("regoffset", "0xffffffff"); ++ test("regvalue", "invalid offset"); ++ test("guid", "0x12345678"); # this will fail if it has been changed ++ test("gsnpsid", "0x4f54200a"); ++ ++ # Test operation of regoffset/regvalue ++ print("\nTesting regoffset\n"); ++ set('regoffset', '5a5a5a5a'); ++ test("regoffset", "0xffffffff"); ++ ++ set('regoffset', '0'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '40000'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '3ffff'); ++ test("regoffset", "0x0003ffff"); ++ ++ set('regoffset', '1'); ++ test("regoffset", "0x00000001"); ++ ++ print("\nTesting regvalue\n"); ++ set('regoffset', '3c'); ++ test("regvalue", "0x12345678"); ++ set('regvalue', '5a5a5a5a'); ++ test("regvalue", "0x5a5a5a5a"); ++ set('regvalue','a5a5a5a5'); ++ test("regvalue", "0xa5a5a5a5"); ++ set('guid','12345678'); ++ ++ # Test HNP Capable ++ print("\nTesting HNP Capable bit\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ set('hnpcapable','0'); ++ test("hnpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ my $old = get('gusbcfg'); ++ print("setting hnpcapable\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ ++ $old = get('gusbcfg'); ++ print("clearing hnpcapable\n"); ++ set('hnpcapable', '0'); ++ test("hnpcapable", "0x0"); ++ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ ++ # Test SRP Capable ++ print("\nTesting SRP Capable bit\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ set('srpcapable','0'); ++ test("srpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ $old = get('gusbcfg'); ++ print("setting srpcapable\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ ++ $old = get('gusbcfg'); ++ print("clearing srpcapable\n"); ++ set('srpcapable', '0'); ++ test("srpcapable", "0x0"); ++ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ ++ # Test GGPIO ++ print("\nTesting GGPIO\n"); ++ set('ggpio','5a5a5a5a'); ++ test('ggpio','0x5a5a0000'); ++ set('ggpio','a5a5a5a5'); ++ test('ggpio','0xa5a50000'); ++ set('ggpio','11110000'); ++ test('ggpio','0x11110000'); ++ set('ggpio','00001111'); ++ test('ggpio','0x00000000'); ++ ++ # Test DEVSPEED ++ print("\nTesting DEVSPEED\n"); ++ set('regoffset','800'); ++ $old = get('regvalue'); ++ set('devspeed','0'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','1'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ set('devspeed','2'); ++ test('devspeed','0x2'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); ++ set('devspeed','3'); ++ test('devspeed','0x3'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); ++ set('devspeed','4'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','5'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ ++ ++ # mode Returns the current mode:0 for device mode1 for host mode Read ++ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write ++ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write ++ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write ++ # bussuspend Suspend the USB bus. Read/Write ++ # busconnected Get the connection status of the bus Read ++ ++ # gotgctl Get or set the Core Control Status Register. Read/Write ++ ## gusbcfg Get or set the Core USB Configuration Register Read/Write ++ # grxfsiz Get or set the Receive FIFO Size Register Read/Write ++ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write ++ # gpvndctl Get or set the PHY Vendor Control Register Read/Write ++ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write ++ ## guid Get or set the value of the User ID Register Read/Write ++ ## gsnpsid Get the value of the Synopsys ID Regester Read ++ ## devspeed Get or set the device speed setting in the DCFG register Read/Write ++ # enumspeed Gets the device enumeration Speed. Read ++ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read ++ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write ++ ++ test_status("TEST NYI") or die; ++} ++ ++test_main(); ++0; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1031_2f7816c5cad9638d36b62f7628b6e665b49b5bb5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1031_2f7816c5cad9638d36b62f7628b6e665b49b5bb5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1031_2f7816c5cad9638d36b62f7628b6e665b49b5bb5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1031_2f7816c5cad9638d36b62f7628b6e665b49b5bb5.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,3452 @@ +commit 2f7816c5cad9638d36b62f7628b6e665b49b5bb5 +Author: popcornmix +Date: Wed Jun 17 17:06:34 2015 +0100 + + bcm2708 framebuffer driver + + Signed-off-by: popcornmix + + bcm2708_fb : Implement blanking support using the mailbox property interface + + bcm2708_fb: Add pan and vsync controls + + bcm2708_fb: DMA acceleration for fb_copyarea + + Based on http://www.raspberrypi.org/phpBB3/viewtopic.php?p=62425#p62425 + Also used Simon's dmaer_master module as a reference for tweaking DMA + settings for better performance. + + For now busylooping only. IRQ support might be added later. + With non-overclocked Raspberry Pi, the performance is ~360 MB/s + for simple copy or ~260 MB/s for two-pass copy (used when dragging + windows to the right). + + In the case of using DMA channel 0, the performance improves + to ~440 MB/s. + + For comparison, VFP optimized CPU copy can only do ~114 MB/s in + the same conditions (hindered by reading uncached source buffer). + + Signed-off-by: Siarhei Siamashka + + bcm2708_fb: report number of dma copies + + Add a counter (exported via debugfs) reporting the + number of dma copies that the framebuffer driver + has done, in order to help evaluate different + optimization strategies. + + Signed-off-by: Luke Diamand + + bcm2708_fb: use IRQ for DMA copies + + The copyarea ioctl() uses DMA to speed things along. This + was busy-waiting for completion. This change supports using + an interrupt instead for larger transfers. For small + transfers, busy-waiting is still likely to be faster. + + Signed-off-by: Luke Diamand + + bcm2708: Make ioctl logging quieter + + video: fbdev: bcm2708_fb: Don't panic on error + + No need to panic the kernel if the video driver fails. + Just print a message and return an error. + + Signed-off-by: Noralf Trønnes + + fbdev: bcm2708_fb: Add ARCH_BCM2835 support + + Add Device Tree support. + Pass the device to dma_alloc_coherent() in order to get the + correct bus address on ARCH_BCM2835. + Use the new DMA legacy API header file. + Including is not necessary. + + Signed-off-by: Noralf Trønnes + + BCM270x_DT: Add bcm2708-fb device + + Add bcm2708-fb to Device Tree and don't add the + platform device when booting in DT mode. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig +index de540debe5ee..7a217f153dce 100644 +--- a/drivers/video/fbdev/Kconfig ++++ b/drivers/video/fbdev/Kconfig +@@ -228,6 +228,20 @@ config FB_TILEBLITTING + comment "Frame buffer hardware drivers" + depends on FB + ++config FB_BCM2708 ++ tristate "BCM2708 framebuffer support" ++ depends on FB && RASPBERRYPI_FIRMWARE ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This framebuffer device driver is for the BCM2708 framebuffer. ++ ++ If you want to compile this as a module (=code which can be ++ inserted into and removed from the running kernel), say M ++ here and read . The module ++ will be called bcm2708_fb. ++ + config FB_GRVGA + tristate "Aeroflex Gaisler framebuffer support" + depends on FB && SPARC +diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile +index 61413f418164..2e403e707459 100644 +--- a/drivers/video/fbdev/Makefile ++++ b/drivers/video/fbdev/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_FB_MACMODES) += macmodes.o + obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o + + # Hardware specific drivers go first ++obj-$(CONFIG_FB_BCM2708) += bcm2708_fb.o + obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o + obj-$(CONFIG_FB_ARC) += arcfb.o + obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o +diff --git a/drivers/video/fbdev/bcm2708_fb.c b/drivers/video/fbdev/bcm2708_fb.c +new file mode 100644 +index 000000000000..37f60813fe1d +--- /dev/null ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -0,0 +1,844 @@ ++/* ++ * linux/drivers/video/bcm2708_fb.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Broadcom simple framebuffer driver ++ * ++ * This file is derived from cirrusfb.c ++ * Copyright 1999-2001 Jeff Garzik ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++//#define BCM2708_FB_DEBUG ++#define MODULE_NAME "bcm2708_fb" ++ ++#ifdef BCM2708_FB_DEBUG ++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) ++#else ++#define print_debug(fmt,...) ++#endif ++ ++/* This is limited to 16 characters when displayed by X startup */ ++static const char *bcm2708_name = "BCM2708 FB"; ++ ++#define DRIVER_NAME "bcm2708_fb" ++ ++static int fbwidth = 800; /* module parameter */ ++static int fbheight = 480; /* module parameter */ ++static int fbdepth = 32; /* module parameter */ ++static int fbswap = 0; /* module parameter */ ++ ++static u32 dma_busy_wait_threshold = 1<<15; ++module_param(dma_busy_wait_threshold, int, 0644); ++MODULE_PARM_DESC(dma_busy_wait_threshold, "Busy-wait for DMA completion below this area"); ++ ++struct fb_alloc_tags { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 xres, yres; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 xres_virtual, yres_virtual; ++ struct rpi_firmware_property_tag_header tag3; ++ u32 bpp; ++ struct rpi_firmware_property_tag_header tag4; ++ u32 xoffset, yoffset; ++ struct rpi_firmware_property_tag_header tag5; ++ u32 base, screen_size; ++ struct rpi_firmware_property_tag_header tag6; ++ u32 pitch; ++}; ++ ++struct bcm2708_fb_stats { ++ struct debugfs_regset32 regset; ++ u32 dma_copies; ++ u32 dma_irqs; ++}; ++ ++struct bcm2708_fb { ++ struct fb_info fb; ++ struct platform_device *dev; ++ struct rpi_firmware *fw; ++ u32 cmap[16]; ++ u32 gpu_cmap[256]; ++ int dma_chan; ++ int dma_irq; ++ void __iomem *dma_chan_base; ++ void *cb_base; /* DMA control blocks */ ++ dma_addr_t cb_handle; ++ struct dentry *debugfs_dir; ++ wait_queue_head_t dma_waitq; ++ struct bcm2708_fb_stats stats; ++ unsigned long fb_bus_address; ++}; ++ ++#define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) ++ ++static void bcm2708_fb_debugfs_deinit(struct bcm2708_fb *fb) ++{ ++ debugfs_remove_recursive(fb->debugfs_dir); ++ fb->debugfs_dir = NULL; ++} ++ ++static int bcm2708_fb_debugfs_init(struct bcm2708_fb *fb) ++{ ++ static struct debugfs_reg32 stats_registers[] = { ++ { ++ "dma_copies", ++ offsetof(struct bcm2708_fb_stats, dma_copies) ++ }, ++ { ++ "dma_irqs", ++ offsetof(struct bcm2708_fb_stats, dma_irqs) ++ }, ++ }; ++ ++ fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); ++ if (!fb->debugfs_dir) { ++ pr_warn("%s: could not create debugfs entry\n", ++ __func__); ++ return -EFAULT; ++ } ++ ++ fb->stats.regset.regs = stats_registers; ++ fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); ++ fb->stats.regset.base = &fb->stats; ++ ++ if (!debugfs_create_regset32( ++ "stats", 0444, fb->debugfs_dir, &fb->stats.regset)) { ++ pr_warn("%s: could not create statistics registers\n", ++ __func__); ++ goto fail; ++ } ++ return 0; ++ ++fail: ++ bcm2708_fb_debugfs_deinit(fb); ++ return -EFAULT; ++} ++ ++static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) ++{ ++ int ret = 0; ++ ++ memset(&var->transp, 0, sizeof(var->transp)); ++ ++ var->red.msb_right = 0; ++ var->green.msb_right = 0; ++ var->blue.msb_right = 0; ++ ++ switch (var->bits_per_pixel) { ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ var->red.length = var->bits_per_pixel; ++ var->red.offset = 0; ++ var->green.length = var->bits_per_pixel; ++ var->green.offset = 0; ++ var->blue.length = var->bits_per_pixel; ++ var->blue.offset = 0; ++ break; ++ case 16: ++ var->red.length = 5; ++ var->blue.length = 5; ++ /* ++ * Green length can be 5 or 6 depending whether ++ * we're operating in RGB555 or RGB565 mode. ++ */ ++ if (var->green.length != 5 && var->green.length != 6) ++ var->green.length = 6; ++ break; ++ case 24: ++ var->red.length = 8; ++ var->blue.length = 8; ++ var->green.length = 8; ++ break; ++ case 32: ++ var->red.length = 8; ++ var->green.length = 8; ++ var->blue.length = 8; ++ var->transp.length = 8; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ /* ++ * >= 16bpp displays have separate colour component bitfields ++ * encoded in the pixel data. Calculate their position from ++ * the bitfield length defined above. ++ */ ++ if (ret == 0 && var->bits_per_pixel >= 24 && fbswap) { ++ var->blue.offset = 0; ++ var->green.offset = var->blue.offset + var->blue.length; ++ var->red.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->red.offset + var->red.length; ++ } else if (ret == 0 && var->bits_per_pixel >= 24) { ++ var->red.offset = 0; ++ var->green.offset = var->red.offset + var->red.length; ++ var->blue.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->blue.offset + var->blue.length; ++ } else if (ret == 0 && var->bits_per_pixel >= 16) { ++ var->blue.offset = 0; ++ var->green.offset = var->blue.offset + var->blue.length; ++ var->red.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->red.offset + var->red.length; ++ } ++ ++ return ret; ++} ++ ++static int bcm2708_fb_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ /* info input, var output */ ++ print_debug("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ print_debug("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d\n", var, ++ var->xres, var->yres, var->xres_virtual, var->yres_virtual, ++ var->bits_per_pixel); ++ ++ if (!var->bits_per_pixel) ++ var->bits_per_pixel = 16; ++ ++ if (bcm2708_fb_set_bitfields(var) != 0) { ++ pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n", ++ var->bits_per_pixel); ++ return -EINVAL; ++ } ++ ++ ++ if (var->xres_virtual < var->xres) ++ var->xres_virtual = var->xres; ++ /* use highest possible virtual resolution */ ++ if (var->yres_virtual == -1) { ++ var->yres_virtual = 480; ++ ++ pr_err ++ ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n", ++ var->xres_virtual, var->yres_virtual); ++ } ++ if (var->yres_virtual < var->yres) ++ var->yres_virtual = var->yres; ++ ++ if (var->xoffset < 0) ++ var->xoffset = 0; ++ if (var->yoffset < 0) ++ var->yoffset = 0; ++ ++ /* truncate xoffset and yoffset to maximum if too high */ ++ if (var->xoffset > var->xres_virtual - var->xres) ++ var->xoffset = var->xres_virtual - var->xres - 1; ++ if (var->yoffset > var->yres_virtual - var->yres) ++ var->yoffset = var->yres_virtual - var->yres - 1; ++ ++ return 0; ++} ++ ++static int bcm2708_fb_set_par(struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ struct fb_alloc_tags fbinfo = { ++ .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres = info->var.xres, ++ .yres = info->var.yres, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres_virtual = info->var.xres_virtual, ++ .yres_virtual = info->var.yres_virtual, ++ .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, ++ .bpp = info->var.bits_per_pixel, ++ .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, ++ .xoffset = info->var.xoffset, ++ .yoffset = info->var.yoffset, ++ .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, ++ .base = 0, ++ .screen_size = 0, ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, ++ .pitch = 0, ++ }; ++ int ret; ++ ++ print_debug("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ ++ ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); ++ if (ret) { ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ret); ++ return ret; ++ } ++ ++ if (info->var.bits_per_pixel <= 8) ++ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else ++ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; ++ ++ fb->fb.fix.line_length = fbinfo.pitch; ++ fbinfo.base |= 0x40000000; ++ fb->fb_bus_address = fbinfo.base; ++ fbinfo.base &= ~0xc0000000; ++ fb->fb.fix.smem_start = fbinfo.base; ++ fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; ++ fb->fb.screen_size = fbinfo.screen_size; ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); ++ if (!fb->fb.screen_base) { ++ /* the console may currently be locked */ ++ console_trylock(); ++ console_unlock(); ++ dev_err(info->device, "Failed to set screen_base\n"); ++ return -ENOMEM; ++ } ++ ++ print_debug ++ ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", ++ (void *)fb->fb.screen_base, (void *)fb->fb_bus_address, ++ fbinfo.xres, fbinfo.yres, fbinfo.bpp, ++ fbinfo.pitch, (int)fb->fb.screen_size); ++ ++ return 0; ++} ++ ++static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) ++{ ++ unsigned int mask = (1 << bf->length) - 1; ++ ++ return (val >> (16 - bf->length) & mask) << bf->offset; ++} ++ ++ ++static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, ++ unsigned int green, unsigned int blue, ++ unsigned int transp, struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ ++ /*print_debug("BCM2708FB: setcolreg %d:(%02x,%02x,%02x,%02x) %x\n", regno, red, green, blue, transp, fb->fb.fix.visual);*/ ++ if (fb->fb.var.bits_per_pixel <= 8) { ++ if (regno < 256) { ++ /* blue [23:16], green [15:8], red [7:0] */ ++ fb->gpu_cmap[regno] = ((red >> 8) & 0xff) << 0 | ++ ((green >> 8) & 0xff) << 8 | ++ ((blue >> 8) & 0xff) << 16; ++ } ++ /* Hack: we need to tell GPU the palette has changed, but currently bcm2708_fb_set_par takes noticable time when called for every (256) colour */ ++ /* So just call it for what looks like the last colour in a list for now. */ ++ if (regno == 15 || regno == 255) { ++ struct packet { ++ u32 offset; ++ u32 length; ++ u32 cmap[256]; ++ } *packet; ++ int ret; ++ ++ packet = kmalloc(sizeof(*packet), GFP_KERNEL); ++ if (!packet) ++ return -ENOMEM; ++ packet->offset = 0; ++ packet->length = regno + 1; ++ memcpy(packet->cmap, fb->gpu_cmap, sizeof(packet->cmap)); ++ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, ++ packet, (2 + packet->length) * sizeof(u32)); ++ if (ret || packet->offset) ++ dev_err(info->device, "Failed to set palette (%d,%u)\n", ++ ret, packet->offset); ++ kfree(packet); ++ } ++ } else if (regno < 16) { ++ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | ++ convert_bitfield(blue, &fb->fb.var.blue) | ++ convert_bitfield(green, &fb->fb.var.green) | ++ convert_bitfield(red, &fb->fb.var.red); ++ } ++ return regno > 255; ++} ++ ++static int bcm2708_fb_blank(int blank_mode, struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ u32 value; ++ int ret; ++ ++ switch (blank_mode) { ++ case FB_BLANK_UNBLANK: ++ value = 0; ++ break; ++ case FB_BLANK_NORMAL: ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_POWERDOWN: ++ value = 1; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &value, sizeof(value)); ++ if (ret) ++ dev_err(info->device, "bcm2708_fb_blank(%d) failed: %d\n", ++ blank_mode, ret); ++ ++ return ret; ++} ++ ++static int bcm2708_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ s32 result; ++ info->var.xoffset = var->xoffset; ++ info->var.yoffset = var->yoffset; ++ result = bcm2708_fb_set_par(info); ++ if (result != 0) ++ pr_err("bcm2708_fb_pan_display(%d,%d) returns=%d\n", var->xoffset, var->yoffset, result); ++ return result; ++} ++ ++static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ u32 dummy = 0; ++ int ret; ++ ++ switch (cmd) { ++ case FBIO_WAITFORVSYNC: ++ ret = rpi_firmware_property(fb->fw, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, ++ &dummy, sizeof(dummy)); ++ break; ++ default: ++ dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); ++ return -ENOTTY; ++ } ++ ++ if (ret) ++ dev_err(info->device, "ioctl 0x%x failed (%d)\n", cmd, ret); ++ ++ return ret; ++} ++static void bcm2708_fb_fillrect(struct fb_info *info, ++ const struct fb_fillrect *rect) ++{ ++ /* (is called) print_debug("bcm2708_fb_fillrect\n"); */ ++ cfb_fillrect(info, rect); ++} ++ ++/* A helper function for configuring dma control block */ ++static void set_dma_cb(struct bcm2708_dma_cb *cb, ++ int burst_size, ++ dma_addr_t dst, ++ int dst_stride, ++ dma_addr_t src, ++ int src_stride, ++ int w, ++ int h) ++{ ++ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; ++ cb->dst = dst; ++ cb->src = src; ++ /* ++ * This is not really obvious from the DMA documentation, ++ * but the top 16 bits must be programmmed to "height -1" ++ * and not "height" in 2D mode. ++ */ ++ cb->length = ((h - 1) << 16) | w; ++ cb->stride = ((dst_stride - w) << 16) | (u16)(src_stride - w); ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++static void bcm2708_fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *region) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ struct bcm2708_dma_cb *cb = fb->cb_base; ++ int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3; ++ /* Channel 0 supports larger bursts and is a bit faster */ ++ int burst_size = (fb->dma_chan == 0) ? 8 : 2; ++ int pixels = region->width * region->height; ++ ++ /* Fallback to cfb_copyarea() if we don't like something */ ++ if (in_atomic() || ++ bytes_per_pixel > 4 || ++ info->var.xres * info->var.yres > 1920 * 1200 || ++ region->width <= 0 || region->width > info->var.xres || ++ region->height <= 0 || region->height > info->var.yres || ++ region->sx < 0 || region->sx >= info->var.xres || ++ region->sy < 0 || region->sy >= info->var.yres || ++ region->dx < 0 || region->dx >= info->var.xres || ++ region->dy < 0 || region->dy >= info->var.yres || ++ region->sx + region->width > info->var.xres || ++ region->dx + region->width > info->var.xres || ++ region->sy + region->height > info->var.yres || ++ region->dy + region->height > info->var.yres) { ++ cfb_copyarea(info, region); ++ return; ++ } ++ ++ if (region->dy == region->sy && region->dx > region->sx) { ++ /* ++ * A difficult case of overlapped copy. Because DMA can't ++ * copy individual scanlines in backwards direction, we need ++ * two-pass processing. We do it by programming a chain of dma ++ * control blocks in the first 16K part of the buffer and use ++ * the remaining 48K as the intermediate temporary scratch ++ * buffer. The buffer size is sufficient to handle up to ++ * 1920x1200 resolution at 32bpp pixel depth. ++ */ ++ int y; ++ dma_addr_t control_block_pa = fb->cb_handle; ++ dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024; ++ int scanline_size = bytes_per_pixel * region->width; ++ int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size; ++ ++ for (y = 0; y < region->height; y += scanlines_per_cb) { ++ dma_addr_t src = ++ fb->fb_bus_address + ++ bytes_per_pixel * region->sx + ++ (region->sy + y) * fb->fb.fix.line_length; ++ dma_addr_t dst = ++ fb->fb_bus_address + ++ bytes_per_pixel * region->dx + ++ (region->dy + y) * fb->fb.fix.line_length; ++ ++ if (region->height - y < scanlines_per_cb) ++ scanlines_per_cb = region->height - y; ++ ++ set_dma_cb(cb, burst_size, scratchbuf, scanline_size, ++ src, fb->fb.fix.line_length, ++ scanline_size, scanlines_per_cb); ++ control_block_pa += sizeof(struct bcm2708_dma_cb); ++ cb->next = control_block_pa; ++ cb++; ++ ++ set_dma_cb(cb, burst_size, dst, fb->fb.fix.line_length, ++ scratchbuf, scanline_size, ++ scanline_size, scanlines_per_cb); ++ control_block_pa += sizeof(struct bcm2708_dma_cb); ++ cb->next = control_block_pa; ++ cb++; ++ } ++ /* move the pointer back to the last dma control block */ ++ cb--; ++ } else { ++ /* A single dma control block is enough. */ ++ int sy, dy, stride; ++ if (region->dy <= region->sy) { ++ /* processing from top to bottom */ ++ dy = region->dy; ++ sy = region->sy; ++ stride = fb->fb.fix.line_length; ++ } else { ++ /* processing from bottom to top */ ++ dy = region->dy + region->height - 1; ++ sy = region->sy + region->height - 1; ++ stride = -fb->fb.fix.line_length; ++ } ++ set_dma_cb(cb, burst_size, ++ fb->fb_bus_address + dy * fb->fb.fix.line_length + ++ bytes_per_pixel * region->dx, ++ stride, ++ fb->fb_bus_address + sy * fb->fb.fix.line_length + ++ bytes_per_pixel * region->sx, ++ stride, ++ region->width * bytes_per_pixel, ++ region->height); ++ } ++ ++ /* end of dma control blocks chain */ ++ cb->next = 0; ++ ++ ++ if (pixels < dma_busy_wait_threshold) { ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ bcm_dma_wait_idle(fb->dma_chan_base); ++ } else { ++ void __iomem *dma_chan = fb->dma_chan_base; ++ cb->info |= BCM2708_DMA_INT_EN; ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ while (bcm_dma_is_busy(dma_chan)) { ++ wait_event_interruptible( ++ fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); ++ } ++ fb->stats.dma_irqs++; ++ } ++ fb->stats.dma_copies++; ++} ++ ++static void bcm2708_fb_imageblit(struct fb_info *info, ++ const struct fb_image *image) ++{ ++ /* (is called) print_debug("bcm2708_fb_imageblit\n"); */ ++ cfb_imageblit(info, image); ++} ++ ++static irqreturn_t bcm2708_fb_dma_irq(int irq, void *cxt) ++{ ++ struct bcm2708_fb *fb = cxt; ++ ++ /* FIXME: should read status register to check if this is ++ * actually interrupting us or not, in case this interrupt ++ * ever becomes shared amongst several DMA channels ++ * ++ * readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_IRQ; ++ */ ++ ++ /* acknowledge the interrupt */ ++ writel(BCM2708_DMA_INT, fb->dma_chan_base + BCM2708_DMA_CS); ++ ++ wake_up(&fb->dma_waitq); ++ return IRQ_HANDLED; ++} ++ ++static struct fb_ops bcm2708_fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = bcm2708_fb_check_var, ++ .fb_set_par = bcm2708_fb_set_par, ++ .fb_setcolreg = bcm2708_fb_setcolreg, ++ .fb_blank = bcm2708_fb_blank, ++ .fb_fillrect = bcm2708_fb_fillrect, ++ .fb_copyarea = bcm2708_fb_copyarea, ++ .fb_imageblit = bcm2708_fb_imageblit, ++ .fb_pan_display = bcm2708_fb_pan_display, ++ .fb_ioctl = bcm2708_ioctl, ++}; ++ ++static int bcm2708_fb_register(struct bcm2708_fb *fb) ++{ ++ int ret; ++ ++ fb->fb.fbops = &bcm2708_fb_ops; ++ fb->fb.flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_COPYAREA; ++ fb->fb.pseudo_palette = fb->cmap; ++ ++ strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id)); ++ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fb->fb.fix.type_aux = 0; ++ fb->fb.fix.xpanstep = 1; ++ fb->fb.fix.ypanstep = 1; ++ fb->fb.fix.ywrapstep = 0; ++ fb->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fb->fb.var.xres = fbwidth; ++ fb->fb.var.yres = fbheight; ++ fb->fb.var.xres_virtual = fbwidth; ++ fb->fb.var.yres_virtual = fbheight; ++ fb->fb.var.bits_per_pixel = fbdepth; ++ fb->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ fb->fb.var.activate = FB_ACTIVATE_NOW; ++ fb->fb.var.nonstd = 0; ++ fb->fb.var.height = -1; /* height of picture in mm */ ++ fb->fb.var.width = -1; /* width of picture in mm */ ++ fb->fb.var.accel_flags = 0; ++ ++ fb->fb.monspecs.hfmin = 0; ++ fb->fb.monspecs.hfmax = 100000; ++ fb->fb.monspecs.vfmin = 0; ++ fb->fb.monspecs.vfmax = 400; ++ fb->fb.monspecs.dclkmin = 1000000; ++ fb->fb.monspecs.dclkmax = 100000000; ++ ++ bcm2708_fb_set_bitfields(&fb->fb.var); ++ init_waitqueue_head(&fb->dma_waitq); ++ ++ /* ++ * Allocate colourmap. ++ */ ++ ++ fb_set_var(&fb->fb, &fb->fb.var); ++ ret = bcm2708_fb_set_par(&fb->fb); ++ if (ret) ++ return ret; ++ ++ print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", fbwidth, ++ fbheight, fbdepth, fbswap); ++ ++ ret = register_framebuffer(&fb->fb); ++ print_debug("BCM2708FB: register framebuffer (%d)\n", ret); ++ if (ret == 0) ++ goto out; ++ ++ print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_probe(struct platform_device *dev) ++{ ++ struct device_node *fw_np; ++ struct rpi_firmware *fw; ++ struct bcm2708_fb *fb; ++ int ret; ++ ++ fw_np = of_parse_phandle(dev->dev.of_node, "firmware", 0); ++/* Remove comment when booting without Device Tree is no longer supported ++ if (!fw_np) { ++ dev_err(&dev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++*/ ++ fw = rpi_firmware_get(fw_np); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ fb = kzalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); ++ if (!fb) { ++ dev_err(&dev->dev, ++ "could not allocate new bcm2708_fb struct\n"); ++ ret = -ENOMEM; ++ goto free_region; ++ } ++ ++ fb->fw = fw; ++ bcm2708_fb_debugfs_init(fb); ++ ++ fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, ++ &fb->cb_handle, GFP_KERNEL); ++ if (!fb->cb_base) { ++ dev_err(&dev->dev, "cannot allocate DMA CBs\n"); ++ ret = -ENOMEM; ++ goto free_fb; ++ } ++ ++ pr_info("BCM2708FB: allocated DMA memory %08x\n", ++ fb->cb_handle); ++ ++ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, ++ &fb->dma_chan_base, &fb->dma_irq); ++ if (ret < 0) { ++ dev_err(&dev->dev, "couldn't allocate a DMA channel\n"); ++ goto free_cb; ++ } ++ fb->dma_chan = ret; ++ ++ ret = request_irq(fb->dma_irq, bcm2708_fb_dma_irq, ++ 0, "bcm2708_fb dma", fb); ++ if (ret) { ++ pr_err("%s: failed to request DMA irq\n", __func__); ++ goto free_dma_chan; ++ } ++ ++ ++ pr_info("BCM2708FB: allocated DMA channel %d @ %p\n", ++ fb->dma_chan, fb->dma_chan_base); ++ ++ fb->dev = dev; ++ fb->fb.device = &dev->dev; ++ ++ ret = bcm2708_fb_register(fb); ++ if (ret == 0) { ++ platform_set_drvdata(dev, fb); ++ goto out; ++ } ++ ++free_dma_chan: ++ bcm_dma_chan_free(fb->dma_chan); ++free_cb: ++ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); ++free_fb: ++ kfree(fb); ++free_region: ++ dev_err(&dev->dev, "probe failed, err %d\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_remove(struct platform_device *dev) ++{ ++ struct bcm2708_fb *fb = platform_get_drvdata(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ unregister_framebuffer(&fb->fb); ++ ++ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); ++ bcm_dma_chan_free(fb->dma_chan); ++ ++ bcm2708_fb_debugfs_deinit(fb); ++ ++ free_irq(fb->dma_irq, fb); ++ ++ kfree(fb); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2708_fb_of_match_table[] = { ++ { .compatible = "brcm,bcm2708-fb", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2708_fb_of_match_table); ++ ++static struct platform_driver bcm2708_fb_driver = { ++ .probe = bcm2708_fb_probe, ++ .remove = bcm2708_fb_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2708_fb_of_match_table, ++ }, ++}; ++ ++static int __init bcm2708_fb_init(void) ++{ ++ return platform_driver_register(&bcm2708_fb_driver); ++} ++ ++module_init(bcm2708_fb_init); ++ ++static void __exit bcm2708_fb_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_fb_driver); ++} ++ ++module_exit(bcm2708_fb_exit); ++ ++module_param(fbwidth, int, 0644); ++module_param(fbheight, int, 0644); ++module_param(fbdepth, int, 0644); ++module_param(fbswap, int, 0644); ++ ++MODULE_DESCRIPTION("BCM2708 framebuffer driver"); ++MODULE_LICENSE("GPL"); ++ ++MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer"); ++MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer"); ++MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer"); ++MODULE_PARM_DESC(fbswap, "Swap order of red and blue in 24 and 32 bit modes"); +diff --git a/drivers/video/logo/logo_linux_clut224.ppm b/drivers/video/logo/logo_linux_clut224.ppm +index 3c14e43b82fe..7626beb6a5bb 100644 +--- a/drivers/video/logo/logo_linux_clut224.ppm ++++ b/drivers/video/logo/logo_linux_clut224.ppm +@@ -1,1604 +1,883 @@ + P3 +-# Standard 224-color Linux logo +-80 80 ++63 80 + 255 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 10 10 10 10 10 10 +- 10 10 10 6 6 6 6 6 6 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 22 22 22 26 26 26 30 30 30 34 34 34 +- 30 30 30 30 30 30 26 26 26 18 18 18 +- 14 14 14 10 10 10 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 26 26 26 42 42 42 +- 54 54 54 66 66 66 78 78 78 78 78 78 +- 78 78 78 74 74 74 66 66 66 54 54 54 +- 42 42 42 26 26 26 18 18 18 10 10 10 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 22 22 22 42 42 42 66 66 66 86 86 86 +- 66 66 66 38 38 38 38 38 38 22 22 22 +- 26 26 26 34 34 34 54 54 54 66 66 66 +- 86 86 86 70 70 70 46 46 46 26 26 26 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 50 50 50 82 82 82 58 58 58 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 54 54 54 86 86 86 66 66 66 +- 38 38 38 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 78 78 78 34 34 34 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 70 70 70 +- 78 78 78 46 46 46 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 42 42 42 82 82 82 +- 26 26 26 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 46 46 46 34 34 34 6 6 6 2 2 6 +- 42 42 42 78 78 78 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 30 30 30 66 66 66 58 58 58 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 86 86 86 101 101 101 46 46 46 10 10 10 +- 2 2 6 58 58 58 70 70 70 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 86 86 86 10 10 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 30 30 30 +- 94 94 94 94 94 94 58 58 58 26 26 26 +- 2 2 6 6 6 6 78 78 78 54 54 54 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 62 62 62 62 62 62 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 54 54 54 38 38 38 18 18 18 10 10 10 +- 2 2 6 2 2 6 34 34 34 82 82 82 +- 38 38 38 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 10 10 10 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 54 54 54 +- 66 66 66 26 26 26 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 82 82 82 2 2 6 2 2 6 +- 2 2 6 6 6 6 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 14 14 14 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 18 18 18 +- 82 82 82 34 34 34 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 6 6 6 6 6 6 22 22 22 34 34 34 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 34 34 34 +- 10 10 10 50 50 50 22 22 22 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 86 86 86 42 42 42 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 38 38 38 116 116 116 94 94 94 22 22 22 +- 22 22 22 2 2 6 2 2 6 2 2 6 +- 14 14 14 86 86 86 138 138 138 162 162 162 +-154 154 154 38 38 38 26 26 26 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 14 14 14 +-134 134 134 198 198 198 195 195 195 116 116 116 +- 10 10 10 2 2 6 2 2 6 6 6 6 +-101 98 89 187 187 187 210 210 210 218 218 218 +-214 214 214 134 134 134 14 14 14 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 50 50 50 18 18 18 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 54 54 54 +-218 218 218 195 195 195 226 226 226 246 246 246 +- 58 58 58 2 2 6 2 2 6 30 30 30 +-210 210 210 253 253 253 174 174 174 123 123 123 +-221 221 221 234 234 234 74 74 74 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 82 82 82 2 2 6 106 106 106 +-170 170 170 26 26 26 86 86 86 226 226 226 +-123 123 123 10 10 10 14 14 14 46 46 46 +-231 231 231 190 190 190 6 6 6 70 70 70 +- 90 90 90 238 238 238 158 158 158 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 86 86 86 6 6 6 116 116 116 +-106 106 106 6 6 6 70 70 70 149 149 149 +-128 128 128 18 18 18 38 38 38 54 54 54 +-221 221 221 106 106 106 2 2 6 14 14 14 +- 46 46 46 190 190 190 198 198 198 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 94 94 94 14 14 14 101 101 101 +-128 128 128 2 2 6 18 18 18 116 116 116 +-118 98 46 121 92 8 121 92 8 98 78 10 +-162 162 162 106 106 106 2 2 6 2 2 6 +- 2 2 6 195 195 195 195 195 195 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 1 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 90 90 90 14 14 14 58 58 58 +-210 210 210 26 26 26 54 38 6 154 114 10 +-226 170 11 236 186 11 225 175 15 184 144 12 +-215 174 15 175 146 61 37 26 9 2 2 6 +- 70 70 70 246 246 246 138 138 138 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 66 66 66 26 26 26 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 10 10 10 +-195 195 195 188 164 115 192 133 9 225 175 15 +-239 182 13 234 190 10 232 195 16 232 200 30 +-245 207 45 241 208 19 232 195 16 184 144 12 +-218 194 134 211 206 186 42 42 42 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 74 74 74 30 30 30 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 86 86 86 14 14 14 2 2 6 +-121 87 25 192 133 9 219 162 10 239 182 13 +-236 186 11 232 195 16 241 208 19 244 214 54 +-246 218 60 246 218 38 246 215 20 241 208 19 +-241 208 19 226 184 13 121 87 25 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 82 82 82 34 34 34 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 82 82 82 30 30 30 61 42 6 +-180 123 7 206 145 10 230 174 11 239 182 13 +-234 190 10 238 202 15 241 208 19 246 218 74 +-246 218 38 246 215 20 246 215 20 246 215 20 +-226 184 13 215 174 15 184 144 12 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 26 26 26 94 94 94 42 42 42 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 50 50 50 104 69 6 +-192 133 9 216 158 10 236 178 12 236 186 11 +-232 195 16 241 208 19 244 214 54 245 215 43 +-246 215 20 246 215 20 241 208 19 198 155 10 +-200 144 11 216 158 10 156 118 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 90 90 90 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 46 46 46 22 22 22 +-137 92 6 210 162 10 239 182 13 238 190 10 +-238 202 15 241 208 19 246 215 20 246 215 20 +-241 208 19 203 166 17 185 133 11 210 150 10 +-216 158 10 210 150 10 102 78 10 2 2 6 +- 6 6 6 54 54 54 14 14 14 2 2 6 +- 2 2 6 62 62 62 74 74 74 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 78 78 78 50 50 50 6 6 6 +- 94 70 30 139 102 15 190 146 13 226 184 13 +-232 200 30 232 195 16 215 174 15 190 146 13 +-168 122 10 192 133 9 210 150 10 213 154 11 +-202 150 34 182 157 106 101 98 89 2 2 6 +- 2 2 6 78 78 78 116 116 116 58 58 58 +- 2 2 6 22 22 22 90 90 90 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 50 50 50 6 6 6 +-128 128 128 174 154 114 156 107 11 168 122 10 +-198 155 10 184 144 12 197 138 11 200 144 11 +-206 145 10 206 145 10 197 138 11 188 164 115 +-195 195 195 198 198 198 174 174 174 14 14 14 +- 2 2 6 22 22 22 116 116 116 116 116 116 +- 22 22 22 2 2 6 74 74 74 70 70 70 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 101 101 101 26 26 26 10 10 10 +-138 138 138 190 190 190 174 154 114 156 107 11 +-197 138 11 200 144 11 197 138 11 192 133 9 +-180 123 7 190 142 34 190 178 144 187 187 187 +-202 202 202 221 221 221 214 214 214 66 66 66 +- 2 2 6 2 2 6 50 50 50 62 62 62 +- 6 6 6 2 2 6 10 10 10 90 90 90 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 34 34 34 +- 74 74 74 74 74 74 2 2 6 6 6 6 +-144 144 144 198 198 198 190 190 190 178 166 146 +-154 121 60 156 107 11 156 107 11 168 124 44 +-174 154 114 187 187 187 190 190 190 210 210 210 +-246 246 246 253 253 253 253 253 253 182 182 182 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 62 62 62 +- 74 74 74 34 34 34 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 22 22 22 54 54 54 +- 94 94 94 18 18 18 2 2 6 46 46 46 +-234 234 234 221 221 221 190 190 190 190 190 190 +-190 190 190 187 187 187 187 187 187 190 190 190 +-190 190 190 195 195 195 214 214 214 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +- 82 82 82 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 86 86 86 54 54 54 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 46 46 46 90 90 90 +- 46 46 46 18 18 18 6 6 6 182 182 182 +-253 253 253 246 246 246 206 206 206 190 190 190 +-190 190 190 190 190 190 190 190 190 190 190 190 +-206 206 206 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-202 202 202 14 14 14 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 86 86 86 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 38 38 38 74 74 74 66 66 66 +- 2 2 6 6 6 6 90 90 90 250 250 250 +-253 253 253 253 253 253 238 238 238 198 198 198 +-190 190 190 190 190 190 195 195 195 221 221 221 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 82 82 82 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 78 78 78 70 70 70 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 66 66 66 78 78 78 6 6 6 +- 2 2 6 18 18 18 218 218 218 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-226 226 226 231 231 231 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 178 178 178 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 18 18 18 90 90 90 62 62 62 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 58 58 58 90 90 90 18 18 18 2 2 6 +- 2 2 6 110 110 110 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 18 18 18 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 94 94 94 +- 54 54 54 26 26 26 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 90 90 90 26 26 26 2 2 6 2 2 6 +- 14 14 14 195 195 195 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 242 242 242 54 54 54 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 86 86 86 50 50 50 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 38 38 38 82 82 82 +- 34 34 34 2 2 6 2 2 6 2 2 6 +- 42 42 42 195 195 195 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 242 242 242 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 246 246 246 238 238 238 +-226 226 226 231 231 231 101 101 101 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 38 38 38 82 82 82 42 42 42 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 62 62 62 66 66 66 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 70 70 70 170 170 170 206 206 206 234 234 234 +-246 246 246 250 250 250 250 250 250 238 238 238 +-226 226 226 231 231 231 238 238 238 250 250 250 +-250 250 250 250 250 250 246 246 246 231 231 231 +-214 214 214 206 206 206 202 202 202 202 202 202 +-198 198 198 202 202 202 182 182 182 18 18 18 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 62 62 62 66 66 66 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 82 82 82 18 18 18 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 94 94 94 182 182 182 218 218 218 242 242 242 +-250 250 250 253 253 253 253 253 253 250 250 250 +-234 234 234 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-238 238 238 226 226 226 210 210 210 202 202 202 +-195 195 195 195 195 195 210 210 210 158 158 158 +- 6 6 6 14 14 14 50 50 50 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 86 86 86 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 70 70 70 2 2 6 +- 2 2 6 10 10 10 2 2 6 22 22 22 +-166 166 166 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-231 231 231 206 206 206 198 198 198 226 226 226 +- 94 94 94 2 2 6 6 6 6 38 38 38 +- 30 30 30 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 62 62 62 66 66 66 +- 26 26 26 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 50 50 50 2 2 6 +- 26 26 26 26 26 26 2 2 6 106 106 106 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 218 218 218 202 202 202 +-210 210 210 14 14 14 2 2 6 2 2 6 +- 30 30 30 22 22 22 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 86 86 86 +- 42 42 42 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 90 90 90 22 22 22 2 2 6 +- 42 42 42 2 2 6 18 18 18 218 218 218 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 221 221 221 +-218 218 218 101 101 101 2 2 6 14 14 14 +- 18 18 18 38 38 38 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 58 58 58 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 82 82 82 2 2 6 26 26 26 +- 22 22 22 2 2 6 123 123 123 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-238 238 238 198 198 198 6 6 6 38 38 38 +- 58 58 58 26 26 26 38 38 38 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 78 78 78 30 30 30 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 30 30 30 +- 74 74 74 58 58 58 2 2 6 42 42 42 +- 2 2 6 22 22 22 231 231 231 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 46 46 46 38 38 38 +- 42 42 42 14 14 14 38 38 38 14 14 14 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 42 42 42 +- 90 90 90 18 18 18 18 18 18 26 26 26 +- 2 2 6 116 116 116 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 94 94 94 6 6 6 +- 2 2 6 2 2 6 10 10 10 34 34 34 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 26 26 26 66 66 66 +- 82 82 82 2 2 6 38 38 38 6 6 6 +- 14 14 14 210 210 210 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 246 246 246 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 144 144 144 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 74 74 74 30 30 30 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 42 42 42 90 90 90 +- 26 26 26 6 6 6 42 42 42 2 2 6 +- 74 74 74 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 242 242 242 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 182 182 182 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 10 10 10 86 86 86 38 38 38 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 66 66 66 82 82 82 +- 2 2 6 22 22 22 18 18 18 2 2 6 +-149 149 149 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 86 86 86 46 46 46 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 46 46 46 86 86 86 18 18 18 +- 2 2 6 34 34 34 10 10 10 6 6 6 +-210 210 210 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 221 221 221 6 6 6 +- 2 2 6 2 2 6 6 6 6 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 26 26 26 66 66 66 62 62 62 2 2 6 +- 2 2 6 38 38 38 10 10 10 26 26 26 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 6 6 6 +- 2 2 6 2 2 6 10 10 10 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 78 78 78 6 6 6 2 2 6 +- 2 2 6 46 46 46 14 14 14 42 42 42 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 10 10 10 +- 2 2 6 2 2 6 22 22 22 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 74 74 74 2 2 6 2 2 6 +- 14 14 14 70 70 70 34 34 34 62 62 62 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 14 14 14 +- 2 2 6 2 2 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 62 62 62 2 2 6 2 2 6 +- 2 2 6 30 30 30 46 46 46 70 70 70 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 226 226 226 10 10 10 +- 2 2 6 6 6 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 62 62 62 2 2 6 2 2 6 +- 2 2 6 2 2 6 30 30 30 78 78 78 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 22 22 22 34 34 34 18 14 6 22 22 22 +- 26 26 26 18 18 18 6 6 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 26 26 26 +- 62 62 62 106 106 106 74 54 14 185 133 11 +-210 162 10 121 92 8 6 6 6 62 62 62 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 158 158 158 18 18 18 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 6 6 6 18 18 18 66 66 66 38 38 38 +- 6 6 6 94 94 94 50 50 50 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 10 10 10 10 10 10 18 18 18 38 38 38 +- 78 78 78 142 134 106 216 158 10 242 186 14 +-246 190 14 246 190 14 156 118 10 10 10 10 +- 90 90 90 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 230 190 +-238 204 91 238 204 91 181 142 44 37 26 9 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 38 38 38 46 46 46 +- 26 26 26 106 106 106 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 22 22 22 +- 30 30 30 38 38 38 50 50 50 70 70 70 +-106 106 106 190 142 34 226 170 11 242 186 14 +-246 190 14 246 190 14 246 190 14 154 114 10 +- 6 6 6 74 74 74 226 226 226 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 228 184 62 +-241 196 14 241 208 19 232 195 16 38 30 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 30 30 30 26 26 26 +-203 166 17 154 142 90 66 66 66 26 26 26 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 38 38 38 58 58 58 +- 78 78 78 86 86 86 101 101 101 123 123 123 +-175 146 61 210 150 10 234 174 13 246 186 14 +-246 190 14 246 190 14 246 190 14 238 190 10 +-102 78 10 2 2 6 46 46 46 198 198 198 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 224 178 62 +-242 186 14 241 196 14 210 166 10 22 18 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 121 92 8 +-238 202 15 232 195 16 82 82 82 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 38 38 38 70 70 70 154 122 46 +-190 142 34 200 144 11 197 138 11 197 138 11 +-213 154 11 226 170 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-225 175 15 46 32 6 2 2 6 22 22 22 +-158 158 158 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 242 242 242 224 178 62 +-239 182 13 236 186 11 213 154 11 46 32 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 225 175 15 +-238 190 10 236 186 11 112 100 78 42 42 42 +- 14 14 14 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 154 122 46 213 154 11 +-226 170 11 230 174 11 226 170 11 226 170 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 184 144 12 10 10 10 2 2 6 +- 6 6 6 116 116 116 242 242 242 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 198 198 198 214 170 54 +-236 178 12 236 178 12 210 150 10 137 92 6 +- 18 14 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 70 47 6 200 144 11 236 178 12 +-239 182 13 239 182 13 124 112 88 58 58 58 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 70 70 70 180 133 36 226 170 11 +-239 182 13 242 186 14 242 186 14 246 186 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 98 70 6 2 2 6 +- 2 2 6 2 2 6 66 66 66 221 221 221 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 206 206 206 198 198 198 214 166 58 +-230 174 11 230 174 11 216 158 10 192 133 9 +-163 110 8 116 81 8 102 78 10 116 81 8 +-167 114 7 197 138 11 226 170 11 239 182 13 +-242 186 14 242 186 14 162 146 94 78 78 78 +- 34 34 34 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 190 142 34 226 170 11 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 241 196 14 203 166 17 22 18 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +-218 218 218 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 206 206 206 198 198 198 202 162 69 +-226 170 11 236 178 12 224 166 10 210 150 10 +-200 144 11 197 138 11 192 133 9 197 138 11 +-210 150 10 226 170 11 242 186 14 246 190 14 +-246 190 14 246 186 14 225 175 15 124 112 88 +- 62 62 62 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 174 135 50 224 166 10 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 139 102 15 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 78 78 78 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 214 214 214 198 198 198 190 150 46 +-219 162 10 236 178 12 234 174 13 224 166 10 +-216 158 10 213 154 11 213 154 11 216 158 10 +-226 170 11 239 182 13 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 206 162 42 +-101 101 101 58 58 58 30 30 30 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 174 135 50 216 158 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 226 184 13 +- 61 42 6 2 2 6 2 2 6 2 2 6 +- 22 22 22 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 226 226 226 187 187 187 180 133 36 +-216 158 10 236 178 12 239 182 13 236 178 12 +-230 174 11 226 170 11 226 170 11 230 174 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 186 14 239 182 13 +-206 162 42 106 106 106 66 66 66 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 213 154 11 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 241 196 14 +-190 146 13 18 14 6 2 2 6 2 2 6 +- 46 46 46 246 246 246 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 221 221 221 86 86 86 156 107 11 +-216 158 10 236 178 12 242 186 14 246 186 14 +-242 186 14 239 182 13 239 182 13 242 186 14 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 225 175 15 142 122 72 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 210 150 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-232 195 16 121 92 8 34 34 34 106 106 106 +-221 221 221 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-242 242 242 82 82 82 18 14 6 163 110 8 +-216 158 10 236 178 12 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 163 133 67 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 163 133 67 210 150 10 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 215 174 15 190 178 144 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 218 218 218 +- 58 58 58 2 2 6 22 18 6 167 114 7 +-216 158 10 236 178 12 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 186 14 242 186 14 190 150 46 +- 54 54 54 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 38 38 38 86 86 86 180 133 36 213 154 11 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 190 146 13 214 214 214 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 170 170 170 26 26 26 +- 2 2 6 2 2 6 37 26 9 163 110 8 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 224 166 10 142 122 72 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 109 106 95 192 133 9 224 166 10 +-242 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 226 184 13 210 162 10 142 110 46 +-226 226 226 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-198 198 198 66 66 66 2 2 6 2 2 6 +- 2 2 6 2 2 6 50 34 6 156 107 11 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 242 186 14 +-234 174 13 213 154 11 154 122 46 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 154 121 60 206 145 10 234 174 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 210 162 10 163 110 8 +- 61 42 6 138 138 138 218 218 218 250 250 250 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 210 210 210 144 144 144 66 66 66 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 163 110 8 +-216 158 10 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 239 182 13 230 174 11 216 158 10 +-190 142 34 124 112 88 70 70 70 38 38 38 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 62 62 62 168 124 44 206 145 10 224 166 10 +-236 178 12 239 182 13 242 186 14 242 186 14 +-246 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 236 178 12 216 158 10 175 118 6 +- 80 54 7 2 2 6 6 6 6 30 30 30 +- 54 54 54 62 62 62 50 50 50 38 38 38 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 167 114 7 +-213 154 11 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 242 186 14 239 182 13 239 182 13 +-230 174 11 210 150 10 174 135 50 124 112 88 +- 82 82 82 54 54 54 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 158 118 36 192 133 9 200 144 11 +-216 158 10 219 162 10 224 166 10 226 170 11 +-230 174 11 236 178 12 239 182 13 239 182 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 230 174 11 210 150 10 163 110 8 +-104 69 6 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 91 60 6 167 114 7 +-206 145 10 230 174 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 186 14 242 186 14 +-239 182 13 230 174 11 224 166 10 213 154 11 +-180 133 36 124 112 88 86 86 86 58 58 58 +- 38 38 38 22 22 22 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 70 70 70 138 110 50 158 118 36 +-167 114 7 180 123 7 192 133 9 197 138 11 +-200 144 11 206 145 10 213 154 11 219 162 10 +-224 166 10 230 174 11 239 182 13 242 186 14 +-246 186 14 246 186 14 246 186 14 246 186 14 +-239 182 13 216 158 10 185 133 11 152 99 6 +-104 69 6 18 14 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 152 99 6 +-192 133 9 219 162 10 236 178 12 239 182 13 +-246 186 14 242 186 14 239 182 13 236 178 12 +-224 166 10 206 145 10 192 133 9 154 121 60 +- 94 94 94 62 62 62 42 42 42 22 22 22 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 34 34 34 58 58 58 78 78 78 +-101 98 89 124 112 88 142 110 46 156 107 11 +-163 110 8 167 114 7 175 118 6 180 123 7 +-185 133 11 197 138 11 210 150 10 219 162 10 +-226 170 11 236 178 12 236 178 12 234 174 13 +-219 162 10 197 138 11 163 110 8 130 83 6 +- 91 60 6 10 10 10 2 2 6 2 2 6 +- 18 18 18 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 26 26 26 2 2 6 +- 2 2 6 6 6 6 70 47 6 137 92 6 +-175 118 6 200 144 11 219 162 10 230 174 11 +-234 174 13 230 174 11 219 162 10 210 150 10 +-192 133 9 163 110 8 124 112 88 82 82 82 +- 50 50 50 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 22 22 22 34 34 34 +- 42 42 42 58 58 58 74 74 74 86 86 86 +-101 98 89 122 102 70 130 98 46 121 87 25 +-137 92 6 152 99 6 163 110 8 180 123 7 +-185 133 11 197 138 11 206 145 10 200 144 11 +-180 123 7 156 107 11 130 83 6 104 69 6 +- 50 34 6 54 54 54 110 110 110 101 98 89 +- 86 86 86 82 82 82 78 78 78 78 78 78 +- 78 78 78 78 78 78 78 78 78 78 78 78 +- 78 78 78 82 82 82 86 86 86 94 94 94 +-106 106 106 101 101 101 86 66 34 124 80 6 +-156 107 11 180 123 7 192 133 9 200 144 11 +-206 145 10 200 144 11 192 133 9 175 118 6 +-139 102 15 109 106 95 70 70 70 42 42 42 +- 22 22 22 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 10 10 10 +- 14 14 14 22 22 22 30 30 30 38 38 38 +- 50 50 50 62 62 62 74 74 74 90 90 90 +-101 98 89 112 100 78 121 87 25 124 80 6 +-137 92 6 152 99 6 152 99 6 152 99 6 +-138 86 6 124 80 6 98 70 6 86 66 30 +-101 98 89 82 82 82 58 58 58 46 46 46 +- 38 38 38 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 38 38 38 42 42 42 +- 54 54 54 82 82 82 94 86 76 91 60 6 +-134 86 6 156 107 11 167 114 7 175 118 6 +-175 118 6 167 114 7 152 99 6 121 87 25 +-101 98 89 62 62 62 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 6 6 6 10 10 10 +- 18 18 18 22 22 22 30 30 30 42 42 42 +- 50 50 50 66 66 66 86 86 86 101 98 89 +-106 86 58 98 70 6 104 69 6 104 69 6 +-104 69 6 91 60 6 82 62 34 90 90 90 +- 62 62 62 38 38 38 22 22 22 14 14 14 +- 10 10 10 10 10 10 10 10 10 10 10 10 +- 10 10 10 10 10 10 6 6 6 10 10 10 +- 10 10 10 10 10 10 10 10 10 14 14 14 +- 22 22 22 42 42 42 70 70 70 89 81 66 +- 80 54 7 104 69 6 124 80 6 137 92 6 +-134 86 6 116 81 8 100 82 52 86 86 86 +- 58 58 58 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 18 18 18 26 26 26 38 38 38 54 54 54 +- 70 70 70 86 86 86 94 86 76 89 81 66 +- 89 81 66 86 86 86 74 74 74 50 50 50 +- 30 30 30 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 34 34 34 58 58 58 +- 82 82 82 89 81 66 89 81 66 89 81 66 +- 94 86 66 94 86 76 74 74 74 50 50 50 +- 26 26 26 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 14 14 14 18 18 18 +- 30 30 30 38 38 38 46 46 46 54 54 54 +- 50 50 50 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 26 26 26 +- 38 38 38 50 50 50 58 58 58 58 58 58 +- 54 54 54 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 6 6 6 10 10 10 14 14 14 18 18 18 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 18 18 18 22 22 22 22 22 22 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++10 15 3 2 3 1 12 18 4 42 61 14 19 27 6 11 16 4 ++38 55 13 10 15 3 3 4 1 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 ++12 18 4 1 1 0 23 34 8 31 45 11 10 15 3 32 47 11 ++34 49 12 3 4 1 3 4 1 3 4 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 10 15 3 29 42 10 26 37 9 12 18 4 ++55 80 19 81 118 28 55 80 19 92 132 31 106 153 36 69 100 23 ++100 144 34 80 116 27 42 61 14 81 118 28 23 34 8 27 40 9 ++15 21 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 1 0 29 42 10 15 21 5 50 72 17 ++74 107 25 45 64 15 102 148 35 80 116 27 84 121 28 111 160 38 ++69 100 23 65 94 22 81 118 28 29 42 10 17 25 6 29 42 10 ++23 34 8 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++15 21 5 15 21 5 34 49 12 101 146 34 111 161 38 97 141 33 ++97 141 33 119 172 41 117 170 40 116 167 40 118 170 40 118 171 40 ++117 169 40 118 170 40 111 160 38 118 170 40 96 138 32 89 128 30 ++81 118 28 11 16 4 10 15 3 1 1 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 3 4 1 34 49 12 101 146 34 79 115 27 111 160 38 ++114 165 39 113 163 39 118 170 40 117 169 40 118 171 40 117 169 40 ++116 167 40 119 172 41 113 163 39 92 132 31 105 151 36 113 163 39 ++75 109 26 19 27 6 16 23 5 11 16 4 0 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++80 116 27 106 153 36 105 151 36 114 165 39 118 170 40 118 171 40 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 117 169 40 118 170 40 118 170 40 ++117 170 40 75 109 26 75 109 26 34 49 12 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++64 92 22 65 94 22 100 144 34 118 171 40 118 170 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 41 118 170 40 117 169 40 ++109 158 37 105 151 36 104 150 35 47 69 16 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++42 61 14 115 167 39 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 96 138 32 17 25 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 47 69 16 ++114 165 39 117 168 40 117 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 119 172 41 96 138 32 12 18 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++32 47 11 105 151 36 118 170 40 117 169 40 117 169 40 116 168 40 ++109 157 37 111 160 38 117 169 40 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 69 100 23 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 19 27 6 101 146 34 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 170 40 ++118 171 40 115 166 39 107 154 36 111 161 38 117 169 40 117 169 40 ++117 169 40 118 171 40 75 109 26 19 27 6 2 3 1 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 ++89 128 30 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++111 160 38 92 132 31 79 115 27 96 138 32 115 166 39 119 171 41 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 109 157 37 26 37 9 ++0 0 0 0 0 0 0 0 0 0 0 0 64 92 22 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 118 171 40 109 157 37 ++89 128 30 81 118 28 100 144 34 115 166 39 117 169 40 117 169 40 ++117 169 40 117 170 40 113 163 39 60 86 20 1 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++27 40 9 96 138 32 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 169 40 101 146 34 67 96 23 55 80 19 84 121 28 ++113 163 39 119 171 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 65 94 22 ++0 0 0 0 0 0 0 0 0 15 21 5 101 146 34 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 118 171 40 104 150 35 69 100 23 53 76 18 ++81 118 28 111 160 38 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 114 165 39 69 100 23 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++31 45 11 77 111 26 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 168 40 92 132 31 47 69 16 ++38 55 13 81 118 28 113 163 39 119 171 41 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 41 92 132 31 ++10 15 3 0 0 0 0 0 0 36 52 12 115 166 39 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++118 171 40 102 148 35 64 92 22 34 49 12 65 94 22 106 153 36 ++118 171 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 170 40 107 154 36 55 80 19 15 21 5 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++29 42 10 101 146 34 118 171 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 113 163 39 ++75 109 26 27 40 9 36 52 12 89 128 30 116 167 40 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 104 150 35 ++16 23 5 0 0 0 0 0 0 53 76 18 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 109 157 37 ++67 96 23 23 34 8 42 61 14 96 138 32 118 170 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 74 107 25 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 31 45 11 101 146 34 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 171 41 102 148 35 47 69 16 14 20 5 50 72 17 102 148 35 ++118 171 40 117 169 40 117 169 40 117 169 40 118 170 40 102 148 35 ++15 21 5 0 0 0 0 0 0 50 72 17 118 170 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 167 40 84 121 28 27 40 9 ++19 27 6 74 107 25 114 165 39 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 75 109 26 10 15 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 38 55 13 102 148 35 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 115 167 39 77 111 26 17 25 6 19 27 6 ++77 111 26 115 166 39 118 170 40 117 169 40 119 172 41 81 118 28 ++3 4 1 0 0 0 0 0 0 27 40 9 111 160 38 118 170 40 ++117 169 40 118 171 40 105 151 36 50 72 17 10 15 3 38 55 13 ++100 144 34 118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 79 115 27 15 21 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 10 15 3 64 92 22 111 160 38 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 96 138 32 32 47 11 ++3 4 1 50 72 17 107 154 36 120 173 41 105 151 36 31 45 11 ++0 0 0 0 0 0 0 0 0 3 4 1 65 94 22 117 169 40 ++118 170 40 89 128 30 26 37 9 3 4 1 60 86 20 111 161 38 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++97 141 33 36 52 12 1 1 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 20 5 75 109 26 117 168 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 107 154 36 ++45 64 15 2 3 1 31 45 11 75 109 26 32 47 11 0 1 0 ++0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 55 80 19 ++65 94 22 11 16 4 11 16 4 75 109 26 116 168 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 107 154 36 ++47 69 16 3 4 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 12 18 4 69 100 23 111 161 38 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++111 160 38 50 72 17 2 3 1 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++1 1 0 12 18 4 81 118 28 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 170 40 118 171 40 101 146 34 ++42 61 14 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 4 1 36 52 12 89 128 30 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 41 101 146 34 14 20 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 47 69 16 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 111 160 38 69 100 23 19 27 6 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 11 16 4 69 100 23 ++115 167 39 119 172 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 172 41 75 109 26 3 4 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 23 34 8 106 153 36 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 119 172 41 105 151 36 42 61 14 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 15 21 5 ++45 64 15 80 116 27 114 165 39 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 119 172 41 ++97 141 33 20 30 7 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 1 0 53 76 18 114 165 39 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 40 104 150 35 64 92 22 31 45 11 10 15 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 36 52 12 97 141 33 109 158 37 113 163 39 116 168 40 ++117 169 40 117 170 40 118 170 40 119 172 41 115 167 39 84 121 28 ++23 34 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 4 1 50 72 17 102 148 35 118 171 40 ++119 171 41 118 170 40 117 169 40 117 169 40 115 166 39 111 161 38 ++109 157 37 79 115 27 12 18 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 4 1 15 21 5 23 34 8 45 64 15 106 153 36 ++116 167 40 111 160 38 101 146 34 79 115 27 42 61 14 10 15 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 20 30 7 60 86 20 ++89 128 30 106 153 36 113 163 39 117 169 40 84 121 28 29 42 10 ++19 27 6 10 15 3 2 3 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 38 55 13 ++36 52 12 26 37 9 12 18 4 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 0 0 19 2 7 52 5 18 ++78 7 27 88 8 31 81 7 29 56 5 19 25 2 9 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 19 27 6 31 45 11 38 55 13 32 47 11 3 4 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++9 0 3 12 1 4 9 0 3 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 28 3 10 99 9 35 156 14 55 182 16 64 ++189 17 66 190 17 67 189 17 66 184 17 65 166 15 58 118 13 41 ++45 4 16 3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 11 1 4 52 5 18 101 9 35 134 12 47 ++151 14 53 154 14 54 151 14 53 113 10 40 11 1 4 0 0 0 ++3 0 1 67 6 24 159 14 56 190 17 67 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 191 17 67 ++174 16 61 101 9 35 14 1 5 0 0 0 35 3 12 108 10 38 ++122 11 43 122 11 43 112 10 39 87 8 30 50 5 17 13 1 5 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 56 5 19 141 13 49 182 16 64 191 17 67 191 17 67 ++190 17 67 190 17 67 191 17 67 113 10 40 3 0 1 1 0 0 ++79 7 28 180 16 63 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 188 17 66 122 11 43 11 1 4 41 4 14 176 16 62 ++191 17 67 191 17 67 191 17 67 190 17 67 181 16 63 146 13 51 ++75 7 26 10 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 1 2 ++90 8 32 178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 41 4 14 ++173 16 61 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 88 8 31 1 0 0 89 8 31 ++185 17 65 189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++186 17 65 124 11 43 25 2 9 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 89 8 31 ++184 17 65 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 151 14 53 34 3 12 0 0 0 0 0 0 79 7 28 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 146 13 51 9 1 3 7 1 2 ++108 10 38 187 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 176 16 62 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 38 3 13 0 0 0 0 0 0 0 0 0 50 5 17 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 141 13 49 7 1 3 0 0 0 ++11 1 4 112 10 39 187 17 66 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 113 10 40 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 7 1 3 132 12 46 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 ++35 3 12 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++101 9 35 185 17 65 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 180 16 63 67 6 24 0 0 0 0 0 0 ++0 0 0 11 1 4 108 10 38 186 17 65 189 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 44 4 15 177 16 62 189 17 66 ++188 17 66 188 17 66 189 17 66 189 17 66 134 12 47 28 3 10 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 79 7 28 159 14 56 188 17 66 191 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 190 17 67 191 17 67 ++188 17 66 158 14 55 72 7 25 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 8 1 3 95 9 33 182 16 64 189 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 122 11 43 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 88 8 31 190 17 67 188 17 66 ++188 17 66 189 17 66 185 17 65 113 10 40 18 2 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 24 2 8 77 7 27 124 11 43 154 14 54 ++168 15 59 173 16 61 173 16 61 168 15 59 154 14 54 124 11 43 ++77 7 27 22 2 8 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 77 7 27 173 16 61 ++190 17 67 188 17 66 188 17 66 190 17 67 164 15 57 23 2 8 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 118 13 41 191 17 67 188 17 66 ++190 17 67 174 16 61 87 8 30 8 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 10 1 4 29 3 10 40 4 14 36 3 13 ++18 2 6 2 0 1 0 0 0 0 0 0 3 0 1 14 1 5 ++26 2 9 33 3 11 32 3 11 25 2 9 13 1 5 3 0 1 ++0 0 0 14 1 5 56 5 19 95 9 33 109 10 38 101 9 35 ++77 7 27 35 3 12 5 0 2 0 0 0 1 0 0 56 5 19 ++156 14 55 190 17 67 188 17 66 188 17 66 182 16 64 50 5 17 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 189 17 66 ++151 14 53 52 5 18 2 0 1 0 0 0 0 0 0 1 0 0 ++28 3 10 90 8 32 146 13 51 170 15 60 178 16 62 174 16 61 ++158 14 55 112 10 39 40 4 14 1 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++56 5 19 146 13 51 183 17 64 191 17 67 191 17 67 191 17 67 ++188 17 66 173 16 61 122 11 43 41 4 14 1 0 0 0 0 0 ++30 3 10 124 11 43 185 17 65 190 17 67 187 17 66 67 6 24 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 6 1 2 134 12 47 168 15 59 99 9 35 ++21 2 7 0 0 0 0 0 0 0 0 0 6 1 2 77 7 27 ++162 15 57 190 17 67 191 17 67 189 17 66 189 17 66 189 17 66 ++190 17 67 191 17 67 169 15 59 75 7 26 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 79 7 28 ++178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 191 17 67 170 15 60 79 7 28 5 0 2 ++0 0 0 10 1 3 78 7 27 159 14 56 188 17 66 75 7 26 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 35 3 12 29 3 10 2 0 1 ++0 0 0 0 0 0 0 0 0 9 1 3 101 9 35 183 17 64 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 178 16 63 67 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 182 16 64 89 8 31 ++4 0 1 0 0 0 0 0 0 25 2 9 73 7 26 31 3 11 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 4 0 1 98 9 34 187 17 66 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 25 2 9 ++0 0 0 0 0 0 0 0 0 8 1 3 134 12 47 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 ++68 6 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 6 1 2 19 2 7 3 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 65 6 23 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 83 8 29 ++0 0 0 0 0 0 0 0 0 41 4 14 177 16 62 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++159 14 56 28 3 10 0 0 0 0 0 0 0 0 0 23 2 8 ++41 4 14 5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++23 2 8 113 10 40 159 14 56 65 6 23 0 0 0 0 0 0 ++0 0 0 16 1 6 146 13 51 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 132 12 46 ++5 0 2 0 0 0 0 0 0 77 7 27 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 98 9 34 0 0 0 0 0 0 12 1 4 134 12 47 ++178 16 63 108 10 38 16 1 6 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 3 10 ++141 13 49 190 17 67 191 17 67 134 12 47 6 1 2 0 0 0 ++0 0 0 68 6 24 186 17 65 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 156 14 55 ++14 1 5 0 0 0 0 0 0 98 9 34 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 156 14 55 19 2 7 0 0 0 47 4 16 181 16 63 ++190 17 67 189 17 66 126 14 44 17 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 1 6 134 12 47 ++191 17 67 188 17 66 190 17 67 162 15 57 19 2 7 0 0 0 ++3 0 1 123 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 163 15 57 ++20 2 7 0 0 0 0 0 0 101 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 182 16 64 52 5 18 0 0 0 73 7 26 188 17 66 ++188 17 66 188 17 66 189 17 66 109 10 38 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 95 9 33 189 17 66 ++188 17 66 188 17 66 189 17 66 171 15 60 29 3 10 0 0 0 ++16 1 6 156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 ++17 2 6 0 0 0 0 0 0 85 8 30 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 81 7 29 0 0 0 85 8 30 190 17 67 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 25 2 9 162 15 57 190 17 67 ++188 17 66 188 17 66 189 17 66 173 16 61 31 3 11 0 0 0 ++30 3 10 171 15 60 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 141 13 49 ++7 1 2 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 88 8 31 190 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 5 0 2 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 68 6 24 187 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 170 15 60 28 3 10 0 0 0 ++34 3 12 174 16 61 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 101 9 35 ++0 0 0 0 0 0 0 0 0 21 2 7 159 14 56 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 81 7 29 189 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 168 15 59 28 3 10 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 109 10 38 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 163 15 57 21 2 7 0 0 0 ++26 2 9 168 15 59 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 47 4 16 ++0 0 0 0 0 0 0 0 0 0 0 0 108 10 38 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 78 7 27 0 0 0 68 6 24 187 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 183 17 64 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 131 12 46 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 0 0 0 ++11 1 4 146 13 51 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 126 14 44 7 1 2 ++0 0 0 0 0 0 0 0 0 0 0 0 32 3 11 164 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 178 16 62 44 4 15 0 0 0 50 5 17 182 16 64 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 131 12 46 3 0 1 0 0 0 ++0 0 0 101 9 35 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 170 15 60 44 4 15 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 77 7 27 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 134 12 47 9 1 3 0 0 0 31 3 11 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 124 11 43 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 101 9 35 0 0 0 0 0 0 ++0 0 0 35 3 12 168 15 59 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 182 16 64 77 7 27 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 1 2 ++99 9 35 185 17 65 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++177 16 62 56 5 19 0 0 0 0 0 0 13 1 5 151 14 53 ++190 17 67 188 17 66 188 17 66 188 17 66 185 17 65 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 99 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 186 17 65 65 6 23 0 0 0 0 0 0 ++0 0 0 0 0 0 79 7 28 182 16 64 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 177 16 62 83 8 29 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 89 8 31 175 16 62 191 17 67 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 181 16 63 ++85 8 30 3 0 1 0 0 0 0 0 0 1 0 0 118 13 41 ++191 17 67 188 17 66 188 17 66 189 17 66 173 16 61 34 3 12 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 189 17 66 169 15 59 30 3 10 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 83 8 29 173 16 61 191 17 67 ++190 17 67 189 17 66 189 17 66 190 17 67 191 17 67 187 17 66 ++151 14 53 56 5 19 3 0 1 0 0 0 16 1 6 50 5 17 ++79 7 28 95 9 33 95 9 33 75 7 26 41 4 14 10 1 4 ++0 0 0 2 0 1 50 5 17 132 12 46 178 16 62 190 17 67 ++191 17 67 191 17 67 191 17 67 186 17 65 154 14 54 68 6 24 ++4 0 1 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++187 17 66 188 17 66 188 17 66 191 17 67 141 13 49 9 1 3 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 14 1 5 151 14 53 190 17 67 ++188 17 66 191 17 67 131 12 46 5 0 2 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 2 0 1 44 4 15 113 10 40 ++156 14 55 173 16 61 174 16 61 164 15 58 134 12 47 77 7 27 ++18 2 6 0 0 0 16 1 6 85 8 30 151 14 53 182 16 64 ++189 17 66 191 17 67 190 17 67 188 17 66 177 16 62 141 13 49 ++68 6 24 8 1 3 0 0 0 8 1 3 44 4 15 88 8 31 ++113 10 40 122 11 43 108 10 38 67 6 24 20 2 7 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 28 3 10 ++166 15 58 190 17 67 188 17 66 187 17 66 79 7 28 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 73 7 26 185 17 65 ++189 17 66 184 17 65 65 6 23 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 ++17 2 6 32 3 11 34 3 12 22 2 8 6 1 2 0 0 0 ++0 0 0 38 3 13 141 13 49 188 17 66 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++184 17 65 122 11 43 21 2 7 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++108 10 38 191 17 67 191 17 67 141 13 49 16 1 6 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 8 1 3 112 10 39 ++186 17 65 124 11 43 10 1 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++36 3 13 156 14 55 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 190 17 67 134 12 47 18 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 7 1 2 41 4 14 75 7 26 66 5 23 19 2 7 ++26 2 9 144 13 50 154 14 54 40 4 14 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++56 5 19 19 2 7 0 0 0 7 1 2 29 3 10 35 3 12 ++19 2 7 2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++134 12 47 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 108 10 38 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++40 4 14 124 11 43 177 16 62 188 17 66 187 17 66 144 13 50 ++24 2 8 17 2 6 22 2 8 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 19 2 7 122 11 43 171 15 60 175 16 62 ++159 14 56 112 10 39 40 4 14 2 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++186 17 65 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 174 16 61 41 4 14 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 72 7 25 ++168 15 59 191 17 67 189 17 66 188 17 66 188 17 66 190 17 67 ++95 9 33 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 95 9 33 191 17 67 189 17 66 189 17 66 ++190 17 67 191 17 67 171 15 60 90 8 32 12 1 4 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 132 12 46 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 98 9 34 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 88 8 31 180 16 63 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 ++146 13 51 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 9 1 3 144 13 50 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 187 17 66 123 11 43 20 2 7 ++0 0 0 0 0 0 0 0 0 0 0 0 21 2 7 163 15 57 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 134 12 47 5 0 2 ++0 0 0 0 0 0 3 0 1 88 8 31 182 16 64 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++171 15 60 31 3 11 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 20 2 7 162 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 132 12 46 ++20 2 7 0 0 0 0 0 0 0 0 0 32 3 11 173 16 61 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 ++0 0 0 0 0 0 72 7 25 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++181 16 63 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 21 2 7 163 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++122 11 43 9 1 3 0 0 0 0 0 0 30 3 10 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 10 1 4 ++0 0 0 38 3 13 166 15 58 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++183 17 64 52 5 18 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 13 1 5 154 14 54 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++186 17 65 79 7 28 0 0 0 0 0 0 14 1 5 156 14 54 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 2 0 1 ++5 0 2 122 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++182 16 64 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 0 1 126 14 44 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 158 14 55 23 2 8 0 0 0 1 0 0 113 10 40 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 78 7 27 0 0 0 ++47 4 16 177 16 62 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++173 16 61 34 3 12 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 85 8 30 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 79 7 28 0 0 0 0 0 0 47 4 16 ++175 16 62 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 156 14 55 22 2 8 0 0 0 ++109 10 38 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 13 1 5 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 35 3 12 173 16 61 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 134 12 47 7 1 2 0 0 0 3 0 1 ++99 9 35 188 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 181 16 63 68 6 24 0 0 0 18 2 6 ++156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++101 9 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 118 13 41 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 168 15 59 28 3 10 0 0 0 0 0 0 ++12 1 4 113 10 40 187 17 66 189 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 180 16 63 88 8 31 4 0 1 0 0 0 47 4 16 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 168 15 59 ++36 3 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 38 3 13 164 15 58 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 11 1 4 90 8 32 169 15 59 190 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 191 17 67 189 17 66 ++158 14 55 68 6 24 4 0 1 0 0 0 0 0 0 73 7 26 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 185 17 65 83 8 29 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 65 6 23 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 185 17 65 56 5 19 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 35 3 12 99 9 35 146 13 51 ++170 15 60 177 16 62 177 16 62 166 15 58 141 13 49 85 8 30 ++24 2 8 0 0 0 0 0 0 0 0 0 0 0 0 85 8 30 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 112 10 39 8 1 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 68 6 24 ++170 15 60 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 11 1 4 ++28 3 10 40 4 14 38 3 13 25 2 9 8 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 78 7 27 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 187 17 66 113 10 40 14 1 5 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++47 4 16 141 13 49 186 17 65 191 17 67 190 17 67 189 17 66 ++189 17 66 191 17 67 156 14 55 20 2 7 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 44 4 15 ++178 16 62 190 17 67 188 17 66 188 17 66 188 17 66 190 17 67 ++191 17 67 173 16 61 90 8 32 10 1 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 14 1 5 68 6 24 131 12 46 162 15 57 174 16 61 ++171 15 60 146 13 51 56 5 19 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 0 1 14 1 5 29 3 10 ++41 4 14 47 4 16 50 5 17 45 4 16 34 3 12 18 2 6 ++5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++90 8 32 169 15 59 185 17 65 187 17 66 182 16 64 163 15 57 ++113 10 40 41 4 14 2 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 21 2 7 34 3 12 ++29 3 10 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 32 3 11 79 7 28 124 11 43 154 14 54 171 15 60 ++180 16 63 182 16 64 182 16 64 180 16 63 174 16 61 159 14 56 ++132 12 46 88 8 31 34 3 12 3 0 1 0 0 0 0 0 0 ++3 0 1 29 3 10 56 5 19 65 6 23 50 5 17 23 2 8 ++3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 25 2 9 ++109 10 38 169 15 59 189 17 66 191 17 67 190 17 67 189 17 66 ++189 17 66 188 17 66 188 17 66 188 17 66 189 17 66 190 17 67 ++191 17 67 190 17 67 171 15 60 98 9 34 10 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 14 1 5 141 13 49 ++191 17 67 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 186 17 65 65 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 23 2 8 166 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 176 16 62 45 4 16 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 83 8 29 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 185 17 65 95 9 33 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++85 8 30 176 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 180 16 63 95 9 33 7 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++2 0 1 52 5 18 141 13 49 185 17 65 191 17 67 189 17 67 ++189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 187 17 66 ++146 13 51 56 5 19 4 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 1 5 68 6 24 131 12 46 166 15 58 ++180 16 63 183 17 64 180 16 63 168 15 59 134 12 47 75 7 26 ++17 2 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 24 2 8 ++44 4 15 52 5 18 45 4 16 26 2 9 6 1 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1032_0589949525ceb0661b74ea41b4ae62f5d64b5eff.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1032_0589949525ceb0661b74ea41b4ae62f5d64b5eff.patch --- linux-4.9.13/debian/patches/rpi/rpi_1032_0589949525ceb0661b74ea41b4ae62f5d64b5eff.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1032_0589949525ceb0661b74ea41b4ae62f5d64b5eff.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,623 @@ +commit 0589949525ceb0661b74ea41b4ae62f5d64b5eff +Author: Florian Meier +Date: Fri Nov 22 14:22:53 2013 +0100 + + dmaengine: Add support for BCM2708 + + Add support for DMA controller of BCM2708 as used in the Raspberry Pi. + Currently it only supports cyclic DMA. + + Signed-off-by: Florian Meier + + dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels + + DMA: fix cyclic LITE length overflow bug + + dmaengine: bcm2708: Remove chancnt affectations + + Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d: + chancnt is already filled by dma_async_device_register, which uses the channel + list to know how much channels there is. + + Since it's already filled, we can safely remove it from the drivers' probe + function. + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: overwrite dreq only if it is not set + + dreq is set when the DMA channel is fetched from Device Tree. + slave_id is set using dmaengine_slave_config(). + Only overwrite dreq with slave_id if it is not set. + + dreq/slave_id in the cyclic DMA case is not touched, because I don't + have hardware to test with. + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: do device registration in the board file + + Don't register the device in the driver. Do it in the board file. + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835 + + Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. + Add Device Tree support to the non ARCH_BCM2835 case. + Use the same driver name regardless of architecture. + + Signed-off-by: Noralf Trønnes + + BCM270x_DT: add bcm2835-dma entry + + Add Device Tree entry for bcm2835-dma. + The entry doesn't contain any resources since they are handled + by the arch/arm/mach-bcm270x/dma.c driver. + In non-DT mode, don't add the device in the board file. + + Signed-off-by: Noralf Trønnes + + bcm2708-dmaengine: Add debug options + + BCM270x: Add memory and irq resources to dmaengine device and DT + + Prepare for merging of the legacy DMA API arch driver dma.c + with bcm2708-dmaengine by adding memory and irq resources both + to platform file device and Device Tree node. + Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c + + Merge the legacy DMA API driver with bcm2708-dmaengine. + This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox + driver is also needed). + + Changes to the dma.c code: + - Use BIT() macro. + - Cutdown some comments to one line. + - Add mutex to vc_dmaman and use this, since the dev lock is locked + during probing of the engine part. + - Add global g_dmaman variable since drvdata is used by the engine part. + - Restructure for readability: + vc_dmaman_chan_alloc() + vc_dmaman_chan_free() + bcm_dma_chan_free() + - Restructure bcm_dma_chan_alloc() to simplify error handling. + - Use device irq resources instead of hardcoded bcm_dma_irqs table. + - Remove dev_dmaman_register() and code it directly. + - Remove dev_dmaman_deregister() and code it directly. + - Simplify bcm_dmaman_probe() using devm_* functions. + - Get dmachans from DT if available. + - Keep 'dma.dmachans' module argument name for backwards compatibility. + + Make it available on ARCH_BCM2835 as well. + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: set residue_granularity field + + bcm2708-dmaengine supports residue reporting at burst level + but didn't report this via the residue_granularity field. + + Without this field set properly we get playback issues with I2S cards. + + dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer + + bcm2708-dmaengine: Use more DMA channels (but not 12) + + 1) Only the bcm2708_fb drivers uses the legacy DMA API, and + it requires a BULK-capable channel, so all other types + (FAST, NORMAL and LITE) can be made available to the regular + DMA API. + + 2) DMA channels 11-14 share an interrupt. The driver can't + handle this, so don't use channels 12-14 (12 was used, probably + because it appears to have an interrupt, but in reality that + interrupt is for activity on ANY channel). This may explain + a lockup encountered when running out of DMA channels. + + The combined effect of this patch is to leave 7 DMA channels + available + channel 0 for bcm2708_fb via the legacy API. + + See: https://github.com/raspberrypi/linux/issues/1110 + https://github.com/raspberrypi/linux/issues/1108 + + dmaengine: bcm2708: Make legacy API available for bcm2835-dma + + bcm2708_fb uses the legacy DMA API, so in order to start using + bcm2835-dma, bcm2835-dma has to support the legacy API. Make this + possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove(). + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: Change DT compatible string + + Both bcm2835-dma and bcm2708-dmaengine have the same compatible string. + So change compatible to "brcm,bcm2708-dma". + + Signed-off-by: Noralf Trønnes + + dmaengine: bcm2708: Remove driver but keep legacy API + + Dropping non-DT support means we don't need this driver, + but we still need the legacy DMA API. + + Signed-off-by: Noralf Trønnes + + bcm2708-dmaengine - Fix arm64 portability/build issues + +diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig +index 9c931d36c6a4..9ccee1058e4c 100644 +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -108,7 +108,7 @@ config COH901318 + + config DMA_BCM2835 + tristate "BCM2835 DMA engine support" +- depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 ++ depends on ARCH_BCM2835 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +@@ -499,6 +499,10 @@ config TIMB_DMA + help + Enable support for the Timberdale FPGA DMA engine. + ++config DMA_BCM2708 ++ tristate "BCM2708 DMA legacy API support" ++ depends on DMA_BCM2835 ++ + config TI_CPPI41 + tristate "AM33xx CPPI41 DMA support" + depends on ARCH_OMAP +diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile +index e4dc9cac7ee8..58cc24730ed6 100644 +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o + obj-$(CONFIG_AT_XDMAC) += at_xdmac.o + obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o + obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o ++obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o + obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o + obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o + obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o +diff --git a/drivers/dma/bcm2708-dmaengine.c b/drivers/dma/bcm2708-dmaengine.c +new file mode 100644 +index 000000000000..0f4a26983e40 +--- /dev/null ++++ b/drivers/dma/bcm2708-dmaengine.c +@@ -0,0 +1,281 @@ ++/* ++ * BCM2708 legacy DMA API ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "virt-dma.h" ++ ++#define CACHE_LINE_MASK 31 ++#define DEFAULT_DMACHAN_BITMAP 0x10 /* channel 4 only */ ++ ++/* valid only for channels 0 - 14, 15 has its own base address */ ++#define BCM2708_DMA_CHAN(n) ((n) << 8) /* base address */ ++#define BCM2708_DMA_CHANIO(dma_base, n) \ ++ ((void __iomem *)((char *)(dma_base) + BCM2708_DMA_CHAN(n))) ++ ++struct vc_dmaman { ++ void __iomem *dma_base; ++ u32 chan_available; /* bitmap of available channels */ ++ u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */ ++ struct mutex lock; ++}; ++ ++static struct device *dmaman_dev; /* we assume there's only one! */ ++static struct vc_dmaman *g_dmaman; /* DMA manager */ ++ ++/* DMA Auxiliary Functions */ ++ ++/* A DMA buffer on an arbitrary boundary may separate a cache line into a ++ section inside the DMA buffer and another section outside it. ++ Even if we flush DMA buffers from the cache there is always the chance that ++ during a DMA someone will access the part of a cache line that is outside ++ the DMA buffer - which will then bring in unwelcome data. ++ Without being able to dictate our own buffer pools we must insist that ++ DMA buffers consist of a whole number of cache lines. ++*/ ++extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) ++{ ++ int i; ++ ++ for (i = 0; i < sg_len; i++) { ++ if (sg_ptr[i].offset & CACHE_LINE_MASK || ++ sg_ptr[i].length & CACHE_LINE_MASK) ++ return 0; ++ } ++ ++ return 1; ++} ++EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma); ++ ++extern void bcm_dma_start(void __iomem *dma_chan_base, ++ dma_addr_t control_block) ++{ ++ dsb(sy); /* ARM data synchronization (push) operation */ ++ ++ writel(control_block, dma_chan_base + BCM2708_DMA_ADDR); ++ writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS); ++} ++EXPORT_SYMBOL_GPL(bcm_dma_start); ++ ++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base) ++{ ++ dsb(sy); ++ ++ /* ugly busy wait only option for now */ ++ while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE) ++ cpu_relax(); ++} ++EXPORT_SYMBOL_GPL(bcm_dma_wait_idle); ++ ++extern bool bcm_dma_is_busy(void __iomem *dma_chan_base) ++{ ++ dsb(sy); ++ ++ return readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_is_busy); ++ ++/* Complete an ongoing DMA (assuming its results are to be ignored) ++ Does nothing if there is no DMA in progress. ++ This routine waits for the current AXI transfer to complete before ++ terminating the current DMA. If the current transfer is hung on a DREQ used ++ by an uncooperative peripheral the AXI transfer may never complete. In this ++ case the routine times out and return a non-zero error code. ++ Use of this routine doesn't guarantee that the ongoing or aborted DMA ++ does not produce an interrupt. ++*/ ++extern int bcm_dma_abort(void __iomem *dma_chan_base) ++{ ++ unsigned long int cs; ++ int rc = 0; ++ ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (BCM2708_DMA_ACTIVE & cs) { ++ long int timeout = 10000; ++ ++ /* write 0 to the active bit - pause the DMA */ ++ writel(0, dma_chan_base + BCM2708_DMA_CS); ++ ++ /* wait for any current AXI transfer to complete */ ++ while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0) ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (0 != (cs & BCM2708_DMA_ISPAUSED)) { ++ /* we'll un-pause when we set of our next DMA */ ++ rc = -ETIMEDOUT; ++ ++ } else if (BCM2708_DMA_ACTIVE & cs) { ++ /* terminate the control block chain */ ++ writel(0, dma_chan_base + BCM2708_DMA_NEXTCB); ++ ++ /* abort the whole DMA */ ++ writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE, ++ dma_chan_base + BCM2708_DMA_CS); ++ } ++ } ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_abort); ++ ++ /* DMA Manager Device Methods */ ++ ++static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base, ++ u32 chans_available) ++{ ++ dmaman->dma_base = dma_base; ++ dmaman->chan_available = chans_available; ++ dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c; /* 2 & 3 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01; /* 0 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_NORMAL_ORD] = 0xfe; /* 1 to 7 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_LITE_ORD] = 0x7f00; /* 8 to 14 */ ++} ++ ++static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman, ++ unsigned required_feature_set) ++{ ++ u32 chans; ++ int chan = 0; ++ int feature; ++ ++ chans = dmaman->chan_available; ++ for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++) ++ /* select the subset of available channels with the desired ++ features */ ++ if (required_feature_set & (1 << feature)) ++ chans &= dmaman->has_feature[feature]; ++ ++ if (!chans) ++ return -ENOENT; ++ ++ /* return the ordinal of the first channel in the bitmap */ ++ while (chans != 0 && (chans & 1) == 0) { ++ chans >>= 1; ++ chan++; ++ } ++ /* claim the channel */ ++ dmaman->chan_available &= ~(1 << chan); ++ ++ return chan; ++} ++ ++static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan) ++{ ++ if (chan < 0) ++ return -EINVAL; ++ ++ if ((1 << chan) & dmaman->chan_available) ++ return -EIDRM; ++ ++ dmaman->chan_available |= (1 << chan); ++ ++ return 0; ++} ++ ++/* DMA Manager Monitor */ ++ ++extern int bcm_dma_chan_alloc(unsigned required_feature_set, ++ void __iomem **out_dma_base, int *out_dma_irq) ++{ ++ struct vc_dmaman *dmaman = g_dmaman; ++ struct platform_device *pdev = to_platform_device(dmaman_dev); ++ struct resource *r; ++ int chan; ++ ++ if (!dmaman_dev) ++ return -ENODEV; ++ ++ mutex_lock(&dmaman->lock); ++ chan = vc_dmaman_chan_alloc(dmaman, required_feature_set); ++ if (chan < 0) ++ goto out; ++ ++ r = platform_get_resource(pdev, IORESOURCE_IRQ, (unsigned int)chan); ++ if (!r) { ++ dev_err(dmaman_dev, "failed to get irq for DMA channel %d\n", ++ chan); ++ vc_dmaman_chan_free(dmaman, chan); ++ chan = -ENOENT; ++ goto out; ++ } ++ ++ *out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, chan); ++ *out_dma_irq = r->start; ++ dev_dbg(dmaman_dev, ++ "Legacy API allocated channel=%d, base=%p, irq=%i\n", ++ chan, *out_dma_base, *out_dma_irq); ++ ++out: ++ mutex_unlock(&dmaman->lock); ++ ++ return chan; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc); ++ ++extern int bcm_dma_chan_free(int channel) ++{ ++ struct vc_dmaman *dmaman = g_dmaman; ++ int rc; ++ ++ if (!dmaman_dev) ++ return -ENODEV; ++ ++ mutex_lock(&dmaman->lock); ++ rc = vc_dmaman_chan_free(dmaman, channel); ++ mutex_unlock(&dmaman->lock); ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_free); ++ ++int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, ++ u32 chans_available) ++{ ++ struct device *dev = &pdev->dev; ++ struct vc_dmaman *dmaman; ++ ++ dmaman = devm_kzalloc(dev, sizeof(*dmaman), GFP_KERNEL); ++ if (!dmaman) ++ return -ENOMEM; ++ ++ mutex_init(&dmaman->lock); ++ vc_dmaman_init(dmaman, base, chans_available); ++ g_dmaman = dmaman; ++ dmaman_dev = dev; ++ ++ dev_info(dev, "DMA legacy API manager at %p, dmachans=0x%x\n", ++ base, chans_available); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcm_dmaman_probe); ++ ++int bcm_dmaman_remove(struct platform_device *pdev) ++{ ++ dmaman_dev = NULL; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcm_dmaman_remove); ++ ++MODULE_LICENSE("GPL"); +diff --git a/include/linux/platform_data/dma-bcm2708.h b/include/linux/platform_data/dma-bcm2708.h +new file mode 100644 +index 000000000000..c5bfff2765be +--- /dev/null ++++ b/include/linux/platform_data/dma-bcm2708.h +@@ -0,0 +1,143 @@ ++/* ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PLAT_BCM2708_DMA_H ++#define _PLAT_BCM2708_DMA_H ++ ++/* DMA CS Control and Status bits */ ++#define BCM2708_DMA_ACTIVE BIT(0) ++#define BCM2708_DMA_INT BIT(2) ++#define BCM2708_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ ++#define BCM2708_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ ++#define BCM2708_DMA_ERR BIT(8) ++#define BCM2708_DMA_ABORT BIT(30) /* stop current CB, go to next, WO */ ++#define BCM2708_DMA_RESET BIT(31) /* WO, self clearing */ ++ ++/* DMA control block "info" field bits */ ++#define BCM2708_DMA_INT_EN BIT(0) ++#define BCM2708_DMA_TDMODE BIT(1) ++#define BCM2708_DMA_WAIT_RESP BIT(3) ++#define BCM2708_DMA_D_INC BIT(4) ++#define BCM2708_DMA_D_WIDTH BIT(5) ++#define BCM2708_DMA_D_DREQ BIT(6) ++#define BCM2708_DMA_S_INC BIT(8) ++#define BCM2708_DMA_S_WIDTH BIT(9) ++#define BCM2708_DMA_S_DREQ BIT(10) ++ ++#define BCM2708_DMA_BURST(x) (((x) & 0xf) << 12) ++#define BCM2708_DMA_PER_MAP(x) ((x) << 16) ++#define BCM2708_DMA_WAITS(x) (((x) & 0x1f) << 21) ++ ++#define BCM2708_DMA_DREQ_EMMC 11 ++#define BCM2708_DMA_DREQ_SDHOST 13 ++ ++#define BCM2708_DMA_CS 0x00 /* Control and Status */ ++#define BCM2708_DMA_ADDR 0x04 ++/* the current control block appears in the following registers - read only */ ++#define BCM2708_DMA_INFO 0x08 ++#define BCM2708_DMA_SOURCE_AD 0x0c ++#define BCM2708_DMA_DEST_AD 0x10 ++#define BCM2708_DMA_NEXTCB 0x1C ++#define BCM2708_DMA_DEBUG 0x20 ++ ++#define BCM2708_DMA4_CS (BCM2708_DMA_CHAN(4) + BCM2708_DMA_CS) ++#define BCM2708_DMA4_ADDR (BCM2708_DMA_CHAN(4) + BCM2708_DMA_ADDR) ++ ++#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w)) ++ ++/* When listing features we can ask for when allocating DMA channels give ++ those with higher priority smaller ordinal numbers */ ++#define BCM_DMA_FEATURE_FAST_ORD 0 ++#define BCM_DMA_FEATURE_BULK_ORD 1 ++#define BCM_DMA_FEATURE_NORMAL_ORD 2 ++#define BCM_DMA_FEATURE_LITE_ORD 3 ++#define BCM_DMA_FEATURE_FAST BIT(BCM_DMA_FEATURE_FAST_ORD) ++#define BCM_DMA_FEATURE_BULK BIT(BCM_DMA_FEATURE_BULK_ORD) ++#define BCM_DMA_FEATURE_NORMAL BIT(BCM_DMA_FEATURE_NORMAL_ORD) ++#define BCM_DMA_FEATURE_LITE BIT(BCM_DMA_FEATURE_LITE_ORD) ++#define BCM_DMA_FEATURE_COUNT 4 ++ ++struct bcm2708_dma_cb { ++ u32 info; ++ u32 src; ++ u32 dst; ++ u32 length; ++ u32 stride; ++ u32 next; ++ u32 pad[2]; ++}; ++ ++struct scatterlist; ++struct platform_device; ++ ++#ifdef CONFIG_DMA_BCM2708 ++ ++int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len); ++void bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block); ++void bcm_dma_wait_idle(void __iomem *dma_chan_base); ++bool bcm_dma_is_busy(void __iomem *dma_chan_base); ++int bcm_dma_abort(void __iomem *dma_chan_base); ++ ++/* return channel no or -ve error */ ++int bcm_dma_chan_alloc(unsigned preferred_feature_set, ++ void __iomem **out_dma_base, int *out_dma_irq); ++int bcm_dma_chan_free(int channel); ++ ++int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, ++ u32 chans_available); ++int bcm_dmaman_remove(struct platform_device *pdev); ++ ++#else /* CONFIG_DMA_BCM2708 */ ++ ++static inline int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, ++ int sg_len) ++{ ++ return 0; ++} ++ ++static inline void bcm_dma_start(void __iomem *dma_chan_base, ++ dma_addr_t control_block) { } ++ ++static inline void bcm_dma_wait_idle(void __iomem *dma_chan_base) { } ++ ++static inline bool bcm_dma_is_busy(void __iomem *dma_chan_base) ++{ ++ return false; ++} ++ ++static inline int bcm_dma_abort(void __iomem *dma_chan_base) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dma_chan_alloc(unsigned preferred_feature_set, ++ void __iomem **out_dma_base, ++ int *out_dma_irq) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dma_chan_free(int channel) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dmaman_probe(struct platform_device *pdev, ++ void __iomem *base, u32 chans_available) ++{ ++ return 0; ++} ++ ++static inline int bcm_dmaman_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++#endif /* CONFIG_DMA_BCM2708 */ ++ ++#endif /* _PLAT_BCM2708_DMA_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1033_aa95d7fc35ab183fb7570171dd52ded09eff88e5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1033_aa95d7fc35ab183fb7570171dd52ded09eff88e5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1033_aa95d7fc35ab183fb7570171dd52ded09eff88e5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1033_aa95d7fc35ab183fb7570171dd52ded09eff88e5.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,1743 @@ +commit aa95d7fc35ab183fb7570171dd52ded09eff88e5 +Author: gellert +Date: Fri Aug 15 16:35:06 2014 +0100 + + MMC: added alternative MMC driver + + mmc: Disable CMD23 transfers on all cards + + Pending wire-level investigation of these types of transfers + and associated errors on bcm2835-mmc, disable for now. Fallback of + CMD18/CMD25 transfers will be used automatically by the MMC layer. + + Reported/Tested-by: Gellert Weisz + + mmc: bcm2835-mmc: enable DT support for all architectures + + Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. + Enable Device Tree support for all architectures. + + Signed-off-by: Noralf Trønnes + + mmc: bcm2835-mmc: fix probe error handling + + Probe error handling is broken in several places. + Simplify error handling by using device managed functions. + Replace pr_{err,info} with dev_{err,info}. + + Signed-off-by: Noralf Trønnes + + bcm2835-mmc: Add locks when accessing sdhost registers + + bcm2835-mmc: Add range of debug options for slowing things down + + bcm2835-mmc: Add option to disable some delays + + bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23 + + bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23 + + bcm2835-mmc: Adding overclocking option + + Allow a different clock speed to be substitued for a requested 50MHz. + This option is exposed using the "overclock_50" DT parameter. + Note that the mmc interface is restricted to EVEN integer divisions of + 250MHz, and the highest sensible option is 63 (250/4 = 62.5), the + next being 125 (250/2) which is much too high. + + Use at your own risk. + + bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz + + Also only warn once for each overclock setting. + + mmc: bcm2835-mmc: Make available on ARCH_BCM2835 + + Make the bcm2835-mmc driver available for use on ARCH_BCM2835. + + Signed-off-by: Noralf Trønnes + + BCM270x_DT: add bcm2835-mmc entry + + Add Device Tree entry for bcm2835-mmc. + In non-DT mode, don't add the device in the board file. + + Signed-off-by: Noralf Trønnes + + bcm2835-mmc: Don't overwrite MMC capabilities from DT + + bcm2835-mmc: Don't override bus width capabilities from devicetree + + Take out the force setting of the MMC_CAP_4_BIT_DATA host capability + so that the result read from devicetree via mmc_of_parse() is + preserved. + + bcm2835-mmc: Only claim one DMA channel + + With both MMC controllers enabled there are few DMA channels left. The + bcm2835-mmc driver only uses DMA in one direction at a time, so it + doesn't need to claim two channels. + + See: https://github.com/raspberrypi/linux/issues/1327 + + Signed-off-by: Phil Elwell + +diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c +index ca9cade317c7..5e9e3518e0eb 100644 +--- a/drivers/mmc/core/quirks.c ++++ b/drivers/mmc/core/quirks.c +@@ -53,6 +53,9 @@ static const struct mmc_fixup mmc_fixup_methods[] = { + + void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) + { ++#ifdef CONFIG_MMC_BCM2835 ++ extern unsigned mmc_debug; ++#endif + const struct mmc_fixup *f; + u64 rev = cid_rev_card(card); + +@@ -79,5 +82,12 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) + f->vendor_fixup(card, f->data); + } + } ++ /* SDHCI on BCM2708 - bug causes a certain sequence of CMD23 operations to fail. ++ * Disable this flag for all cards (fall-back to CMD25/CMD18 multi-block transfers). ++ */ ++#ifdef CONFIG_MMC_BCM2835 ++ if (mmc_debug & (1<<13)) ++ card->quirks |= MMC_QUIRK_BLK_NO_CMD23; ++#endif + } + EXPORT_SYMBOL(mmc_fixup_device); +diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig +index 5274f503a39a..405d62909dd6 100644 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -4,6 +4,35 @@ + + comment "MMC/SD/SDIO Host Controller Drivers" + ++config MMC_BCM2835 ++ tristate "MMC support on BCM2835" ++ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 ++ help ++ This selects the MMC Interface on BCM2835. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ ++config MMC_BCM2835_DMA ++ bool "DMA support on BCM2835 Arasan controller" ++ depends on MMC_BCM2835 ++ help ++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 ++ based chips. ++ ++ If unsure, say N. ++ ++config MMC_BCM2835_PIO_DMA_BARRIER ++ int "Block count limit for PIO transfers" ++ depends on MMC_BCM2835 && MMC_BCM2835_DMA ++ range 0 256 ++ default 2 ++ help ++ The inclusive limit in bytes under which PIO will be used instead of DMA ++ ++ If unsure, say 2 here. ++ + config MMC_ARMMMCI + tristate "ARM AMBA Multimedia Card Interface support" + depends on ARM_AMBA +diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile +index e2bdaaf43184..5133b680970c 100644 +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o + obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o + obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o + obj-$(CONFIG_MMC_MTK) += mtk-sd.o +diff --git a/drivers/mmc/host/bcm2835-mmc.c b/drivers/mmc/host/bcm2835-mmc.c +new file mode 100644 +index 000000000000..4fe8d1fe4457 +--- /dev/null ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -0,0 +1,1574 @@ ++/* ++ * BCM2835 MMC host driver. ++ * ++ * Author: Gellert Weisz ++ * Copyright 2014 ++ * ++ * Based on ++ * sdhci-bcm2708.c by Broadcom ++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko ++ * sdhci.c and sdhci-pci.c by Pierre Ossman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "sdhci.h" ++ ++ ++#define DRIVER_NAME "mmc-bcm2835" ++ ++#define DBG(f, x...) \ ++pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x) ++ ++#ifndef CONFIG_MMC_BCM2835_DMA ++ #define FORCE_PIO ++#endif ++ ++ ++/* the inclusive limit in bytes under which PIO will be used instead of DMA */ ++#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER ++#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER ++#else ++#define PIO_DMA_BARRIER 00 ++#endif ++ ++#define MIN_FREQ 400000 ++#define TIMEOUT_VAL 0xE ++#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1) ++ ++ ++unsigned mmc_debug; ++unsigned mmc_debug2; ++ ++struct bcm2835_host { ++ spinlock_t lock; ++ ++ void __iomem *ioaddr; ++ u32 bus_addr; ++ ++ struct mmc_host *mmc; ++ ++ u32 timeout; ++ ++ int clock; /* Current clock speed */ ++ u8 pwr; /* Current voltage */ ++ ++ unsigned int max_clk; /* Max possible freq */ ++ unsigned int timeout_clk; /* Timeout freq (KHz) */ ++ unsigned int clk_mul; /* Clock Muliplier value */ ++ ++ struct tasklet_struct finish_tasklet; /* Tasklet structures */ ++ ++ struct timer_list timer; /* Timer for timeouts */ ++ ++ struct sg_mapping_iter sg_miter; /* SG state for PIO */ ++ unsigned int blocks; /* remaining PIO blocks */ ++ ++ int irq; /* Device IRQ */ ++ ++ ++ u32 ier; /* cached registers */ ++ ++ struct mmc_request *mrq; /* Current request */ ++ struct mmc_command *cmd; /* Current command */ ++ struct mmc_data *data; /* Current data request */ ++ unsigned int data_early:1; /* Data finished before cmd */ ++ ++ wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ ++ ++ u32 thread_isr; ++ ++ u32 shadow; ++ ++ /*DMA part*/ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; ++ struct dma_async_tx_descriptor *tx_desc; /* descriptor */ ++ ++ bool have_dma; ++ bool use_dma; ++ /*end of DMA part*/ ++ ++ int max_delay; /* maximum length of time spent waiting */ ++ ++ int flags; /* Host attributes */ ++#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ ++#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ ++#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ ++#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ ++#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ ++ ++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ ++ u32 max_overclock; /* Highest reported */ ++}; ++ ++ ++static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg, int from) ++{ ++ unsigned delay; ++ lockdep_assert_held_once(&host->lock); ++ writel(val, host->ioaddr + reg); ++ udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ))); ++ ++ delay = ((mmc_debug >> 16) & 0xf) << ((mmc_debug >> 20) & 0xf); ++ if (delay && !((1<lock); ++ writel(val, host->ioaddr + reg); ++ ++ delay = ((mmc_debug >> 24) & 0xf) << ((mmc_debug >> 28) & 0xf); ++ if (delay) ++ udelay(delay); ++} ++ ++static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg) ++{ ++ lockdep_assert_held_once(&host->lock); ++ return readl(host->ioaddr + reg); ++} ++ ++static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg) ++{ ++ u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow : ++ bcm2835_mmc_readl(host, reg & ~3); ++ u32 word_num = (reg >> 1) & 1; ++ u32 word_shift = word_num * 16; ++ u32 mask = 0xffff << word_shift; ++ u32 newval = (oldval & ~mask) | (val << word_shift); ++ ++ if (reg == SDHCI_TRANSFER_MODE) ++ host->shadow = newval; ++ else ++ bcm2835_mmc_writel(host, newval, reg & ~3, 0); ++ ++} ++ ++static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg) ++{ ++ u32 oldval = bcm2835_mmc_readl(host, reg & ~3); ++ u32 byte_num = reg & 3; ++ u32 byte_shift = byte_num * 8; ++ u32 mask = 0xff << byte_shift; ++ u32 newval = (oldval & ~mask) | (val << byte_shift); ++ ++ bcm2835_mmc_writel(host, newval, reg & ~3, 1); ++} ++ ++ ++static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg) ++{ ++ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); ++ u32 word_num = (reg >> 1) & 1; ++ u32 word_shift = word_num * 16; ++ u32 word = (val >> word_shift) & 0xffff; ++ ++ return word; ++} ++ ++static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg) ++{ ++ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); ++ u32 byte_num = reg & 3; ++ u32 byte_shift = byte_num * 8; ++ u32 byte = (val >> byte_shift) & 0xff; ++ ++ return byte; ++} ++ ++static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear) ++{ ++ u32 ier; ++ ++ ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE); ++ ier &= ~clear; ++ /* change which requests generate IRQs - makes no difference to ++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ ++ bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE, 2); ++} ++ ++ ++static void bcm2835_mmc_dumpregs(struct bcm2835_host *host) ++{ ++ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", ++ mmc_hostname(host->mmc)); ++ ++ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS), ++ bcm2835_mmc_readw(host, SDHCI_HOST_VERSION)); ++ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE), ++ bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT)); ++ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_ARGUMENT), ++ bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE)); ++ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE), ++ bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL)); ++ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL), ++ bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL)); ++ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL), ++ bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)); ++ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL), ++ bcm2835_mmc_readl(host, SDHCI_INT_STATUS)); ++ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_INT_ENABLE), ++ bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE)); ++ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR), ++ bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS)); ++ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES), ++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1)); ++ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_COMMAND), ++ bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT)); ++ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2)); ++ ++ pr_debug(DRIVER_NAME ": ===========================================\n"); ++} ++ ++ ++static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask) ++{ ++ unsigned long timeout; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET); ++ ++ if (mask & SDHCI_RESET_ALL) ++ host->clock = 0; ++ ++ /* Wait max 100 ms */ ++ timeout = 100; ++ ++ /* hw clears the bit when it's done */ ++ while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) { ++ if (timeout == 0) { ++ pr_err("%s: Reset 0x%x never completed.\n", ++ mmc_hostname(host->mmc), (int)mask); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ timeout--; ++ spin_unlock_irqrestore(&host->lock, flags); ++ mdelay(1); ++ spin_lock_irqsave(&host->lock, flags); ++ } ++ ++ if (100-timeout > 10 && 100-timeout > host->max_delay) { ++ host->max_delay = 100-timeout; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); ++ ++static void bcm2835_mmc_init(struct bcm2835_host *host, int soft) ++{ ++ unsigned long flags; ++ if (soft) ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); ++ else ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | ++ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | ++ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | ++ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | ++ SDHCI_INT_RESPONSE; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 3); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 3); ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (soft) { ++ /* force clock reconfiguration */ ++ host->clock = 0; ++ bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios); ++ } ++} ++ ++ ++ ++static void bcm2835_mmc_finish_data(struct bcm2835_host *host); ++ ++static void bcm2835_mmc_dma_complete(void *param) ++{ ++ struct bcm2835_host *host = param; ++ struct dma_chan *dma_chan; ++ unsigned long flags; ++ u32 dir_data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { ++ /* otherwise handled in SDHCI IRQ */ ++ dma_chan = host->dma_chan_rxtx; ++ dir_data = DMA_FROM_DEVICE; ++ ++ dma_unmap_sg(dma_chan->device->dev, ++ host->data->sg, host->data->sg_len, ++ dir_data); ++ ++ bcm2835_mmc_finish_data(host); ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len, chunk; ++ ++ u32 uninitialized_var(scratch); ++ u8 *buf; ++ ++ blksize = host->data->blksz; ++ chunk = 0; ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ if (!sg_miter_next(&host->sg_miter)) ++ BUG(); ++ ++ len = min(host->sg_miter.length, blksize); ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = host->sg_miter.addr; ++ ++ while (len) { ++ if (chunk == 0) { ++ scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER); ++ chunk = 4; ++ } ++ ++ *buf = scratch & 0xFF; ++ ++ buf++; ++ scratch >>= 8; ++ chunk--; ++ len--; ++ } ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len, chunk; ++ u32 scratch; ++ u8 *buf; ++ ++ blksize = host->data->blksz; ++ chunk = 0; ++ chunk = 0; ++ scratch = 0; ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ if (!sg_miter_next(&host->sg_miter)) ++ BUG(); ++ ++ len = min(host->sg_miter.length, blksize); ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = host->sg_miter.addr; ++ ++ while (len) { ++ scratch |= (u32)*buf << (chunk * 8); ++ ++ buf++; ++ chunk++; ++ len--; ++ ++ if ((chunk == 4) || ((len == 0) && (blksize == 0))) { ++ mmc_raw_writel(host, scratch, SDHCI_BUFFER); ++ chunk = 0; ++ scratch = 0; ++ } ++ } ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++ ++static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host) ++{ ++ u32 mask; ++ ++ BUG_ON(!host->data); ++ ++ if (host->blocks == 0) ++ return; ++ ++ if (host->data->flags & MMC_DATA_READ) ++ mask = SDHCI_DATA_AVAILABLE; ++ else ++ mask = SDHCI_SPACE_AVAILABLE; ++ ++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ ++ if (host->data->flags & MMC_DATA_READ) ++ bcm2835_bcm2835_mmc_read_block_pio(host); ++ else ++ bcm2835_bcm2835_mmc_write_block_pio(host); ++ ++ host->blocks--; ++ ++ /* QUIRK used in sdhci.c removes the 'if' */ ++ /* but it seems this is unnecessary */ ++ if (host->blocks == 0) ++ break; ++ ++ ++ } ++} ++ ++ ++static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host) ++{ ++ u32 len, dir_data, dir_slave; ++ struct dma_async_tx_descriptor *desc = NULL; ++ struct dma_chan *dma_chan; ++ ++ ++ WARN_ON(!host->data); ++ ++ if (!host->data) ++ return; ++ ++ if (host->blocks == 0) ++ return; ++ ++ dma_chan = host->dma_chan_rxtx; ++ if (host->data->flags & MMC_DATA_READ) { ++ dir_data = DMA_FROM_DEVICE; ++ dir_slave = DMA_DEV_TO_MEM; ++ } else { ++ dir_data = DMA_TO_DEVICE; ++ dir_slave = DMA_MEM_TO_DEV; ++ } ++ ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ ++ BUG_ON(!dma_chan->device); ++ BUG_ON(!dma_chan->device->dev); ++ BUG_ON(!host->data->sg); ++ ++ len = dma_map_sg(dma_chan->device->dev, host->data->sg, ++ host->data->sg_len, dir_data); ++ if (len > 0) { ++ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg, ++ len, dir_slave, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); ++ } else { ++ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); ++ } ++ if (desc) { ++ unsigned long flags; ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ host->tx_desc = desc; ++ desc->callback = bcm2835_mmc_dma_complete; ++ desc->callback_param = host; ++ spin_unlock_irqrestore(&host->lock, flags); ++ dmaengine_submit(desc); ++ dma_async_issue_pending(dma_chan); ++ } ++ ++} ++ ++ ++ ++static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host) ++{ ++ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; ++ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; ++ ++ if (host->use_dma) ++ host->ier = (host->ier & ~pio_irqs) | dma_irqs; ++ else ++ host->ier = (host->ier & ~dma_irqs) | pio_irqs; ++ ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 4); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 4); ++} ++ ++ ++static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ u8 count; ++ struct mmc_data *data = cmd->data; ++ ++ WARN_ON(host->data); ++ ++ if (data || (cmd->flags & MMC_RSP_BUSY)) { ++ count = TIMEOUT_VAL; ++ bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL); ++ } ++ ++ if (!data) ++ return; ++ ++ /* Sanity checks */ ++ BUG_ON(data->blksz * data->blocks > 524288); ++ BUG_ON(data->blksz > host->mmc->max_blk_size); ++ BUG_ON(data->blocks > 65535); ++ ++ host->data = data; ++ host->data_early = 0; ++ host->data->bytes_xfered = 0; ++ ++ ++ if (!(host->flags & SDHCI_REQ_USE_DMA)) { ++ int flags; ++ ++ flags = SG_MITER_ATOMIC; ++ if (host->data->flags & MMC_DATA_READ) ++ flags |= SG_MITER_TO_SG; ++ else ++ flags |= SG_MITER_FROM_SG; ++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); ++ host->blocks = data->blocks; ++ } ++ ++ host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER; ++ ++ bcm2835_mmc_set_transfer_irqs(host); ++ ++ /* Set the DMA boundary value and block size */ ++ bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, ++ data->blksz), SDHCI_BLOCK_SIZE); ++ bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT); ++ ++ BUG_ON(!host->data); ++} ++ ++static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host, ++ struct mmc_command *cmd) ++{ ++ u16 mode; ++ struct mmc_data *data = cmd->data; ++ ++ if (data == NULL) { ++ /* clear Auto CMD settings for no data CMDs */ ++ mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE); ++ bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | ++ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); ++ return; ++ } ++ ++ WARN_ON(!host->data); ++ ++ mode = SDHCI_TRNS_BLK_CNT_EN; ++ ++ if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) { ++ mode |= SDHCI_TRNS_MULTI; ++ ++ /* ++ * If we are sending CMD23, CMD12 never gets sent ++ * on successful completion (so no Auto-CMD12). ++ */ ++ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) ++ mode |= SDHCI_TRNS_AUTO_CMD12; ++ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { ++ mode |= SDHCI_TRNS_AUTO_CMD23; ++ bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2, 5); ++ } ++ } ++ ++ if (data->flags & MMC_DATA_READ) ++ mode |= SDHCI_TRNS_READ; ++ if (host->flags & SDHCI_REQ_USE_DMA) ++ mode |= SDHCI_TRNS_DMA; ++ ++ bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE); ++} ++ ++void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ int flags; ++ u32 mask; ++ unsigned long timeout; ++ ++ WARN_ON(host->cmd); ++ ++ /* Wait max 10 ms */ ++ timeout = 1000; ++ ++ mask = SDHCI_CMD_INHIBIT; ++ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) ++ mask |= SDHCI_DATA_INHIBIT; ++ ++ /* We shouldn't wait for data inihibit for stop commands, even ++ though they might use busy signaling */ ++ if (host->mrq->data && (cmd == host->mrq->data->stop)) ++ mask &= ~SDHCI_DATA_INHIBIT; ++ ++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ if (timeout == 0) { ++ pr_err("%s: Controller never released inhibit bit(s).\n", ++ mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ cmd->error = -EIO; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ timeout--; ++ udelay(10); ++ } ++ ++ if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) { ++ host->max_delay = (1000-timeout)/100; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ ++ timeout = jiffies; ++ if (!cmd->data && cmd->busy_timeout > 9000) ++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; ++ else ++ timeout += 10 * HZ; ++ mod_timer(&host->timer, timeout); ++ ++ host->cmd = cmd; ++ ++ bcm2835_mmc_prepare_data(host, cmd); ++ ++ bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT, 6); ++ ++ bcm2835_mmc_set_transfer_mode(host, cmd); ++ ++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { ++ pr_err("%s: Unsupported response type!\n", ++ mmc_hostname(host->mmc)); ++ cmd->error = -EINVAL; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ ++ if (!(cmd->flags & MMC_RSP_PRESENT)) ++ flags = SDHCI_CMD_RESP_NONE; ++ else if (cmd->flags & MMC_RSP_136) ++ flags = SDHCI_CMD_RESP_LONG; ++ else if (cmd->flags & MMC_RSP_BUSY) ++ flags = SDHCI_CMD_RESP_SHORT_BUSY; ++ else ++ flags = SDHCI_CMD_RESP_SHORT; ++ ++ if (cmd->flags & MMC_RSP_CRC) ++ flags |= SDHCI_CMD_CRC; ++ if (cmd->flags & MMC_RSP_OPCODE) ++ flags |= SDHCI_CMD_INDEX; ++ ++ if (cmd->data) ++ flags |= SDHCI_CMD_DATA; ++ ++ bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); ++} ++ ++ ++static void bcm2835_mmc_finish_data(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ BUG_ON(!host->data); ++ ++ data = host->data; ++ host->data = NULL; ++ ++ if (data->error) ++ data->bytes_xfered = 0; ++ else ++ data->bytes_xfered = data->blksz * data->blocks; ++ ++ /* ++ * Need to send CMD12 if - ++ * a) open-ended multiblock transfer (no CMD23) ++ * b) error in multiblock transfer ++ */ ++ if (data->stop && ++ (data->error || ++ !host->mrq->sbc)) { ++ ++ /* ++ * The controller needs a reset of internal state machines ++ * upon error conditions. ++ */ ++ if (data->error) { ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); ++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); ++ } ++ ++ bcm2835_mmc_send_command(host, data->stop); ++ } else ++ tasklet_schedule(&host->finish_tasklet); ++} ++ ++static void bcm2835_mmc_finish_command(struct bcm2835_host *host) ++{ ++ int i; ++ ++ BUG_ON(host->cmd == NULL); ++ ++ if (host->cmd->flags & MMC_RSP_PRESENT) { ++ if (host->cmd->flags & MMC_RSP_136) { ++ /* CRC is stripped so we need to do some shifting. */ ++ for (i = 0; i < 4; i++) { ++ host->cmd->resp[i] = bcm2835_mmc_readl(host, ++ SDHCI_RESPONSE + (3-i)*4) << 8; ++ if (i != 3) ++ host->cmd->resp[i] |= ++ bcm2835_mmc_readb(host, ++ SDHCI_RESPONSE + (3-i)*4-1); ++ } ++ } else { ++ host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE); ++ } ++ } ++ ++ host->cmd->error = 0; ++ ++ /* Finished CMD23, now send actual command. */ ++ if (host->cmd == host->mrq->sbc) { ++ host->cmd = NULL; ++ bcm2835_mmc_send_command(host, host->mrq->cmd); ++ ++ if (host->mrq->cmd->data && host->use_dma) { ++ /* DMA transfer starts now, PIO starts after interrupt */ ++ bcm2835_mmc_transfer_dma(host); ++ } ++ } else { ++ ++ /* Processed actual command. */ ++ if (host->data && host->data_early) ++ bcm2835_mmc_finish_data(host); ++ ++ if (!host->cmd->data) ++ tasklet_schedule(&host->finish_tasklet); ++ ++ host->cmd = NULL; ++ } ++} ++ ++ ++static void bcm2835_mmc_timeout_timer(unsigned long data) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = (struct bcm2835_host *)data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host->mrq) { ++ pr_err("%s: Timeout waiting for hardware interrupt.\n", ++ mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ ++ if (host->data) { ++ host->data->error = -ETIMEDOUT; ++ bcm2835_mmc_finish_data(host); ++ } else { ++ if (host->cmd) ++ host->cmd->error = -ETIMEDOUT; ++ else ++ host->mrq->cmd->error = -ETIMEDOUT; ++ ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ } ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable) ++{ ++ if (!(host->flags & SDHCI_DEVICE_DEAD)) { ++ if (enable) ++ host->ier |= SDHCI_INT_CARD_INT; ++ else ++ host->ier &= ~SDHCI_INT_CARD_INT; ++ ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 7); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 7); ++ mmiowb(); ++ } ++} ++ ++static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ if (enable) ++ host->flags |= SDHCI_SDIO_IRQ_ENABLED; ++ else ++ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; ++ ++ bcm2835_mmc_enable_sdio_irq_nolock(host, enable); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ ++ BUG_ON(intmask == 0); ++ ++ if (!host->cmd) { ++ pr_err("%s: Got command interrupt 0x%08x even " ++ "though no command operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_TIMEOUT) ++ host->cmd->error = -ETIMEDOUT; ++ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | ++ SDHCI_INT_INDEX)) { ++ host->cmd->error = -EILSEQ; ++ } ++ ++ if (host->cmd->error) { ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_RESPONSE) ++ bcm2835_mmc_finish_command(host); ++ ++} ++ ++static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ struct dma_chan *dma_chan; ++ u32 dir_data; ++ ++ BUG_ON(intmask == 0); ++ ++ if (!host->data) { ++ /* ++ * The "data complete" interrupt is also used to ++ * indicate that a busy state has ended. See comment ++ * above in sdhci_cmd_irq(). ++ */ ++ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { ++ if (intmask & SDHCI_INT_DATA_END) { ++ bcm2835_mmc_finish_command(host); ++ return; ++ } ++ } ++ ++ pr_debug("%s: Got data interrupt 0x%08x even " ++ "though no data operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_mmc_dumpregs(host); ++ ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_DATA_TIMEOUT) ++ host->data->error = -ETIMEDOUT; ++ else if (intmask & SDHCI_INT_DATA_END_BIT) ++ host->data->error = -EILSEQ; ++ else if ((intmask & SDHCI_INT_DATA_CRC) && ++ SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND)) ++ != MMC_BUS_TEST_R) ++ host->data->error = -EILSEQ; ++ ++ if (host->use_dma) { ++ if (host->data->flags & MMC_DATA_WRITE) { ++ /* IRQ handled here */ ++ ++ dma_chan = host->dma_chan_rxtx; ++ dir_data = DMA_TO_DEVICE; ++ dma_unmap_sg(dma_chan->device->dev, ++ host->data->sg, host->data->sg_len, ++ dir_data); ++ ++ bcm2835_mmc_finish_data(host); ++ } ++ ++ } else { ++ if (host->data->error) ++ bcm2835_mmc_finish_data(host); ++ else { ++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) ++ bcm2835_mmc_transfer_pio(host); ++ ++ if (intmask & SDHCI_INT_DATA_END) { ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ host->data_early = 1; ++ } else { ++ bcm2835_mmc_finish_data(host); ++ } ++ } ++ } ++ } ++} ++ ++ ++static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct bcm2835_host *host = dev_id; ++ u32 intmask, mask, unexpected = 0; ++ int max_loops = 16; ++ ++ spin_lock(&host->lock); ++ ++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ ++ if (!intmask || intmask == 0xffffffff) { ++ result = IRQ_NONE; ++ goto out; ++ } ++ ++ do { ++ /* Clear selected interrupts. */ ++ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | ++ SDHCI_INT_BUS_POWER); ++ bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS, 8); ++ ++ ++ if (intmask & SDHCI_INT_CMD_MASK) ++ bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); ++ ++ if (intmask & SDHCI_INT_DATA_MASK) ++ bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK); ++ ++ if (intmask & SDHCI_INT_BUS_POWER) ++ pr_err("%s: Card is consuming too much power!\n", ++ mmc_hostname(host->mmc)); ++ ++ if (intmask & SDHCI_INT_CARD_INT) { ++ bcm2835_mmc_enable_sdio_irq_nolock(host, false); ++ host->thread_isr |= SDHCI_INT_CARD_INT; ++ result = IRQ_WAKE_THREAD; ++ } ++ ++ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | ++ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | ++ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | ++ SDHCI_INT_CARD_INT); ++ ++ if (intmask) { ++ unexpected |= intmask; ++ bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS, 9); ++ } ++ ++ if (result == IRQ_NONE) ++ result = IRQ_HANDLED; ++ ++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ } while (intmask && --max_loops); ++out: ++ spin_unlock(&host->lock); ++ ++ if (unexpected) { ++ pr_err("%s: Unexpected interrupt 0x%08x.\n", ++ mmc_hostname(host->mmc), unexpected); ++ bcm2835_mmc_dumpregs(host); ++ } ++ ++ return result; ++} ++ ++static irqreturn_t bcm2835_mmc_thread_irq(int irq, void *dev_id) ++{ ++ struct bcm2835_host *host = dev_id; ++ unsigned long flags; ++ u32 isr; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ isr = host->thread_isr; ++ host->thread_isr = 0; ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (isr & SDHCI_INT_CARD_INT) { ++ sdio_run_irqs(host->mmc); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ if (host->flags & SDHCI_SDIO_IRQ_ENABLED) ++ bcm2835_mmc_enable_sdio_irq_nolock(host, true); ++ spin_unlock_irqrestore(&host->lock, flags); ++ } ++ ++ return isr ? IRQ_HANDLED : IRQ_NONE; ++} ++ ++ ++ ++void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock) ++{ ++ int div = 0; /* Initialized for compiler warning */ ++ int real_div = div, clk_mul = 1; ++ u16 clk = 0; ++ unsigned long timeout; ++ unsigned int input_clock = clock; ++ ++ if (host->overclock_50 && (clock == 50000000)) ++ clock = host->overclock_50 * 1000000 + 999999; ++ ++ host->mmc->actual_clock = 0; ++ ++ bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL); ++ ++ if (clock == 0) ++ return; ++ ++ /* Version 3.00 divisors must be a multiple of 2. */ ++ if (host->max_clk <= clock) ++ div = 1; ++ else { ++ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; ++ div += 2) { ++ if ((host->max_clk / div) <= clock) ++ break; ++ } ++ } ++ ++ real_div = div; ++ div >>= 1; ++ ++ if (real_div) ++ clock = (host->max_clk * clk_mul) / real_div; ++ host->mmc->actual_clock = clock; ++ ++ if ((clock > input_clock) && (clock > host->max_overclock)) { ++ pr_warn("%s: Overclocking to %dHz\n", ++ mmc_hostname(host->mmc), clock); ++ host->max_overclock = clock; ++ } ++ ++ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; ++ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) ++ << SDHCI_DIVIDER_HI_SHIFT; ++ clk |= SDHCI_CLOCK_INT_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++ ++ /* Wait max 20 ms */ ++ timeout = 20; ++ while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)) ++ & SDHCI_CLOCK_INT_STABLE)) { ++ if (timeout == 0) { ++ pr_err("%s: Internal clock never " ++ "stabilised.\n", mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ timeout--; ++ mdelay(1); ++ } ++ ++ if (20-timeout > 10 && 20-timeout > host->max_delay) { ++ host->max_delay = 20-timeout; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ ++ clk |= SDHCI_CLOCK_CARD_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++} ++ ++static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = mmc_priv(mmc); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ WARN_ON(host->mrq != NULL); ++ ++ host->mrq = mrq; ++ ++ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) ++ bcm2835_mmc_send_command(host, mrq->sbc); ++ else ++ bcm2835_mmc_send_command(host, mrq->cmd); ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) { ++ /* DMA transfer starts now, PIO starts after interrupt */ ++ bcm2835_mmc_transfer_dma(host); ++ } ++} ++ ++ ++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ u8 ctrl; ++ u16 clk, ctrl_2; ++ ++ pr_debug("bcm2835_mmc_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n", ++ ios->clock, ios->power_mode, ios->bus_width, ++ ios->timing, ios->signal_voltage, ios->drv_type); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (!ios->clock || ios->clock != host->clock) { ++ bcm2835_mmc_set_clock(host, ios->clock); ++ host->clock = ios->clock; ++ } ++ ++ if (host->pwr != SDHCI_POWER_330) { ++ host->pwr = SDHCI_POWER_330; ++ bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL); ++ } ++ ++ ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL); ++ ++ /* set bus width */ ++ ctrl &= ~SDHCI_CTRL_8BITBUS; ++ if (ios->bus_width == MMC_BUS_WIDTH_4) ++ ctrl |= SDHCI_CTRL_4BITBUS; ++ else ++ ctrl &= ~SDHCI_CTRL_4BITBUS; ++ ++ ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */ ++ ++ ++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); ++ /* ++ * We only need to set Driver Strength if the ++ * preset value enable is not set. ++ */ ++ ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2); ++ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; ++ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) ++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; ++ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) ++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; ++ ++ bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); ++ ++ /* Reset SD Clock Enable */ ++ clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL); ++ clk &= ~SDHCI_CLOCK_CARD_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++ ++ /* Re-enable SD Clock */ ++ bcm2835_mmc_set_clock(host, host->clock); ++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static struct mmc_host_ops bcm2835_ops = { ++ .request = bcm2835_mmc_request, ++ .set_ios = bcm2835_mmc_set_ios, ++ .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq, ++}; ++ ++ ++static void bcm2835_mmc_tasklet_finish(unsigned long param) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ struct mmc_request *mrq; ++ ++ host = (struct bcm2835_host *)param; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ del_timer(&host->timer); ++ ++ mrq = host->mrq; ++ ++ /* ++ * The controller needs a reset of internal state machines ++ * upon error conditions. ++ */ ++ if (!(host->flags & SDHCI_DEVICE_DEAD) && ++ ((mrq->cmd && mrq->cmd->error) || ++ (mrq->data && (mrq->data->error || ++ (mrq->data->stop && mrq->data->stop->error))))) { ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); ++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); ++ spin_lock_irqsave(&host->lock, flags); ++ } ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ mmc_request_done(host->mmc, mrq); ++} ++ ++ ++ ++static int bcm2835_mmc_add_host(struct bcm2835_host *host) ++{ ++ struct mmc_host *mmc = host->mmc; ++ struct device *dev = mmc->parent; ++#ifndef FORCE_PIO ++ struct dma_slave_config cfg; ++#endif ++ int ret; ++ ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ host->clk_mul = 0; ++ ++ mmc->f_max = host->max_clk; ++ mmc->f_max = host->max_clk; ++ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; ++ ++ /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */ ++ host->timeout_clk = mmc->f_max / 1000; ++ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; ++ ++ /* host controller capabilities */ ++ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_ERASE | MMC_CAP_NEEDS_POLL | ++ MMC_CAP_SDIO_IRQ | MMC_CAP_SD_HIGHSPEED | ++ MMC_CAP_MMC_HIGHSPEED; ++ ++ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; ++ ++ host->flags = SDHCI_AUTO_CMD23; ++ ++ dev_info(dev, "mmc_debug:%x mmc_debug2:%x\n", mmc_debug, mmc_debug2); ++#ifdef FORCE_PIO ++ dev_info(dev, "Forcing PIO mode\n"); ++ host->have_dma = false; ++#else ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n", ++ DRIVER_NAME); ++ host->have_dma = false; ++ } else { ++ dev_info(dev, "DMA channel allocated"); ++ ++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.slave_id = 11; /* DREQ channel */ ++ ++ /* Validate the slave configurations */ ++ ++ cfg.direction = DMA_MEM_TO_DEV; ++ cfg.src_addr = 0; ++ cfg.dst_addr = host->bus_addr + SDHCI_BUFFER; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDHCI_BUFFER; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Faling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } ++ } ++#endif ++ mmc->max_segs = 128; ++ mmc->max_req_size = 524288; ++ mmc->max_seg_size = mmc->max_req_size; ++ mmc->max_blk_size = 512; ++ mmc->max_blk_count = 65535; ++ ++ /* report supported voltage ranges */ ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ tasklet_init(&host->finish_tasklet, ++ bcm2835_mmc_tasklet_finish, (unsigned long)host); ++ ++ setup_timer(&host->timer, bcm2835_mmc_timeout_timer, (unsigned long)host); ++ init_waitqueue_head(&host->buf_ready_int); ++ ++ bcm2835_mmc_init(host, 0); ++ ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq, ++ bcm2835_mmc_thread_irq, IRQF_SHARED, ++ mmc_hostname(mmc), host); ++ if (ret) { ++ dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret); ++ goto untasklet; ++ } ++ ++ mmiowb(); ++ mmc_add_host(mmc); ++ ++ return 0; ++ ++untasklet: ++ tasklet_kill(&host->finish_tasklet); ++ ++ return ret; ++} ++ ++static int bcm2835_mmc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct clk *clk; ++ struct resource *iomem; ++ struct bcm2835_host *host; ++ struct mmc_host *mmc; ++ const __be32 *addr; ++ int ret; ++ ++ mmc = mmc_alloc_host(sizeof(*host), dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ mmc->ops = &bcm2835_ops; ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ host->timeout = msecs_to_jiffies(1000); ++ spin_lock_init(&host->lock); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ host->ioaddr = devm_ioremap_resource(dev, iomem); ++ if (IS_ERR(host->ioaddr)) { ++ ret = PTR_ERR(host->ioaddr); ++ goto err; ++ } ++ ++ addr = of_get_address(node, 0, NULL, NULL); ++ if (!addr) { ++ dev_err(dev, "could not get DMA-register address\n"); ++ return -ENODEV; ++ } ++ host->bus_addr = be32_to_cpup(addr); ++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", ++ (unsigned long)host->ioaddr, ++ (unsigned long)iomem->start, ++ (unsigned long)host->bus_addr); ++ ++#ifndef FORCE_PIO ++ if (node) { ++ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); ++ } else { ++ dma_cap_mask_t mask; ++ ++ dma_cap_zero(mask); ++ /* we don't care about the channel, any would work */ ++ dma_cap_set(DMA_SLAVE, mask); ++ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL); ++ } ++#endif ++ clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(clk)) { ++ ret = PTR_ERR(clk); ++ if (ret == -EPROBE_DEFER) ++ dev_info(dev, "could not get clk, deferring probe\n"); ++ else ++ dev_err(dev, "could not get clk\n"); ++ goto err; ++ } ++ ++ host->max_clk = clk_get_rate(clk); ++ ++ host->irq = platform_get_irq(pdev, 0); ++ if (host->irq <= 0) { ++ dev_err(dev, "get IRQ failed\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ if (node) { ++ mmc_of_parse(mmc); ++ ++ /* Read any custom properties */ ++ of_property_read_u32(node, ++ "brcm,overclock-50", ++ &host->overclock_50); ++ } else { ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ } ++ ++ ret = bcm2835_mmc_add_host(host); ++ if (ret) ++ goto err; ++ ++ platform_set_drvdata(pdev, host); ++ ++ return 0; ++err: ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++static int bcm2835_mmc_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_host *host = platform_get_drvdata(pdev); ++ unsigned long flags; ++ int dead; ++ u32 scratch; ++ ++ dead = 0; ++ scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ if (scratch == (u32)-1) ++ dead = 1; ++ ++ ++ if (dead) { ++ spin_lock_irqsave(&host->lock, flags); ++ ++ host->flags |= SDHCI_DEVICE_DEAD; ++ ++ if (host->mrq) { ++ pr_err("%s: Controller removed during " ++ " transfer!\n", mmc_hostname(host->mmc)); ++ ++ host->mrq->cmd->error = -ENOMEDIUM; ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ } ++ ++ mmc_remove_host(host->mmc); ++ ++ if (!dead) ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ free_irq(host->irq, host); ++ ++ del_timer_sync(&host->timer); ++ ++ tasklet_kill(&host->finish_tasklet); ++ ++ mmc_free_host(host->mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++ ++static const struct of_device_id bcm2835_mmc_match[] = { ++ { .compatible = "brcm,bcm2835-mmc" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_mmc_match); ++ ++ ++ ++static struct platform_driver bcm2835_mmc_driver = { ++ .probe = bcm2835_mmc_probe, ++ .remove = bcm2835_mmc_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_mmc_match, ++ }, ++}; ++module_platform_driver(bcm2835_mmc_driver); ++ ++module_param(mmc_debug, uint, 0644); ++module_param(mmc_debug2, uint, 0644); ++MODULE_ALIAS("platform:mmc-bcm2835"); ++MODULE_DESCRIPTION("BCM2835 SDHCI driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Gellert Weisz"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1034_7bd28eedc4133822b7ff051f0d95198dcf09bc99.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1034_7bd28eedc4133822b7ff051f0d95198dcf09bc99.patch --- linux-4.9.13/debian/patches/rpi/rpi_1034_7bd28eedc4133822b7ff051f0d95198dcf09bc99.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1034_7bd28eedc4133822b7ff051f0d95198dcf09bc99.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,2401 @@ +commit 7bd28eedc4133822b7ff051f0d95198dcf09bc99 +Author: Phil Elwell +Date: Wed Mar 25 17:49:47 2015 +0000 + + Adding bcm2835-sdhost driver, and an overlay to enable it + + BCM2835 has two SD card interfaces. This driver uses the other one. + + bcm2835-sdhost: Error handling fix, and code clarification + + bcm2835-sdhost: Adding overclocking option + + Allow a different clock speed to be substitued for a requested 50MHz. + This option is exposed using the "overclock_50" DT parameter. + Note that the sdhost interface is restricted to integer divisions of + core_freq, and the highest sensible option for a core_freq of 250MHz + is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too + high. + + Use at your own risk. + + bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz + + Also only warn once for each overclock setting. + + bcm2835-sdhost: Improve error handling and recovery + + 1) Expose the hw_reset method to the MMC framework, removing many + internal calls by the driver. + + 2) Reduce overclock setting on error. + + 3) Increase timeout to cope with high capacity cards. + + 4) Add properties and parameters to control pio_limit and debug. + + 5) Reduce messages at probe time. + + bcm2835-sdhost: Further improve overclock back-off + + bcm2835-sdhost: Clear HBLC for PIO mode + + Also update pio_limit default in overlay README. + + bcm2835-sdhost: Add the ERASE capability + + See: https://github.com/raspberrypi/linux/issues/1076 + + bcm2835-sdhost: Ignore CRC7 for MMC CMD1 + + It seems that the sdhost interface returns CRC7 errors for CMD1, + which is the MMC-specific SEND_OP_COND. Returning these errors to + the MMC layer causes a downward spiral, but ignoring them seems + to be harmless. + + bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences + + The bcm2835-mmc driver (and -sdhost driver that copied from it) + contains code to handle SDIO interrupts in a threaded interrupt + handler rather than waking the MMC framework thread. The change + follows a patch from Russell King that adds the facility as the + preferred way of working. + + However, the new code path is only present in ARCH_BCM2835 + builds, which I have taken to be a way of testing the waters + rather than making the change across the board; I can't see + any technical reason why it wouldn't be enabled for MACH_BCM270X + builds. So this patch standardises on the ARCH_BCM2835 code, + removing the old code paths. + + bcm2835-sdhost: Don't log timeout errors unless debug=1 + + The MMC card-discovery process generates timeouts. This is + expected behaviour, so reporting it to the user serves no purpose. + Suppress the reporting of timeout errors unless the debug flag + is on. + + bcm2835-sdhost: Add workaround for odd behaviour on some cards + + For reasons not understood, the sdhost driver fails when reading + sectors very near the end of some SD cards. The problem could + be related to the similar issue that reading the final sector + of any card as part of a multiple read never completes, and the + workaround is an extension of the mechanism introduced to solve + that problem which ensures those sectors are always read singly. + + bcm2835-sdhost: Major revision + + This is a significant revision of the bcm2835-sdhost driver. It + improves on the original in a number of ways: + + 1) Through the use of CMD23 for reads it appears to avoid problems + reading some sectors on certain high speed cards. + 2) Better atomicity to prevent crashes. + 3) Higher performance. + 4) Activity logging included, for easier diagnosis in the event + of a problem. + + Signed-off-by: Phil Elwell + + bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping + + Allocation problems have been seen in a wireless driver, and + this is the only change which might have been responsible. + + SQUASH: bcm2835-sdhost: Only claim one DMA channel + + With both MMC controllers enabled there are few DMA channels left. The + bcm2835-sdhost driver only uses DMA in one direction at a time, so it + doesn't need to claim two channels. + + See: https://github.com/raspberrypi/linux/issues/1327 + + Signed-off-by: Phil Elwell + + bcm2835-sdhost: Workaround for "slow" sectors + + Some cards have been seen to cause timeouts after certain sectors are + read. This workaround enforces a minimum delay between the stop after + reading one of those sectors and a subsequent data command. + + Using CMD23 (SET_BLOCK_COUNT) avoids this problem, so good cards will + not be penalised by this workaround. + + Signed-off-by: Phil Elwell + + bcm2835-sdhost: Firmware manages the clock divisor + + The bcm2835-sdhost driver hands control of the CDIV clock divisor + register to matching firmware, allowing it to adjust to a changing + core clock. This removes the need to use the performance governor or + to enable io_is_busy on the on-demand governor in order to get the + best SD performance. + + N.B. As SD clocks must be an integer divisor of the core clock, it is + possible that the SD clock for "turbo" mode can be different (even + lower) than "normal" mode. + + Signed-off-by: Phil Elwell + + bcm2835-sdhost: Reset the clock in task context + + Since reprogramming the clock can now involve a round-trip to the + firmware it must not be done at atomic context, and a tasklet + is not a task. + + Signed-off-by: Phil Elwell + + bcm2835-sdhost: Don't exit cmd wait loop on error + + The FAIL flag can be set in the CMD register before command processing + is complete, leading to spurious "failed to complete" errors. This has + the effect of promoting harmless CRC7 errors during CMD1 processing + into errors that can delay and even prevent booting. + + Also: + 1) Convert the last KERN_ERROR message in the register dumping to + KERN_INFO. + 2) Remove an unnecessary reset call from bcm2835_sdhost_add_host. + + See: https://github.com/raspberrypi/linux/pull/1492 + + Signed-off-by: Phil Elwell + +diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig +index 405d62909dd6..87d251e93913 100644 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -6,7 +6,7 @@ comment "MMC/SD/SDIO Host Controller Drivers" + + config MMC_BCM2835 + tristate "MMC support on BCM2835" +- depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 ++ depends on ARCH_BCM2835 + help + This selects the MMC Interface on BCM2835. + +@@ -33,6 +33,16 @@ config MMC_BCM2835_PIO_DMA_BARRIER + + If unsure, say 2 here. + ++config MMC_BCM2835_SDHOST ++ tristate "Support for the SDHost controller on BCM2708/9" ++ depends on ARCH_BCM2835 ++ help ++ This selects the SDHost controller on BCM2835/6. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ + config MMC_ARMMMCI + tristate "ARM AMBA Multimedia Card Interface support" + depends on ARM_AMBA +diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile +index 5133b680970c..adbc4586fec9 100644 +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o + obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o + obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_BCM2835_SDHOST) += bcm2835-sdhost.o + obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o +diff --git a/drivers/mmc/host/bcm2835-sdhost.c b/drivers/mmc/host/bcm2835-sdhost.c +new file mode 100644 +index 000000000000..a9bc79bfdbb7 +--- /dev/null ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -0,0 +1,2189 @@ ++/* ++ * BCM2835 SD host driver. ++ * ++ * Author: Phil Elwell ++ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd. ++ * ++ * Based on ++ * mmc-bcm2835.c by Gellert Weisz ++ * which is, in turn, based on ++ * sdhci-bcm2708.c by Broadcom ++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko ++ * sdhci.c and sdhci-pci.c by Pierre Ossman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#define FIFO_READ_THRESHOLD 4 ++#define FIFO_WRITE_THRESHOLD 4 ++#define ALLOW_CMD23_READ 1 ++#define ALLOW_CMD23_WRITE 0 ++#define ENABLE_LOG 1 ++#define SDDATA_FIFO_PIO_BURST 8 ++#define CMD_DALLY_US 1 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "sdhost-bcm2835" ++ ++#define SDCMD 0x00 /* Command to SD card - 16 R/W */ ++#define SDARG 0x04 /* Argument to SD card - 32 R/W */ ++#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */ ++#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */ ++#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */ ++#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */ ++#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */ ++#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */ ++#define SDHSTS 0x20 /* SD host status - 11 R */ ++#define SDVDD 0x30 /* SD card power control - 1 R/W */ ++#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */ ++#define SDHCFG 0x38 /* Host configuration - 2 R/W */ ++#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */ ++#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */ ++#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */ ++ ++#define SDCMD_NEW_FLAG 0x8000 ++#define SDCMD_FAIL_FLAG 0x4000 ++#define SDCMD_BUSYWAIT 0x800 ++#define SDCMD_NO_RESPONSE 0x400 ++#define SDCMD_LONG_RESPONSE 0x200 ++#define SDCMD_WRITE_CMD 0x80 ++#define SDCMD_READ_CMD 0x40 ++#define SDCMD_CMD_MASK 0x3f ++ ++#define SDCDIV_MAX_CDIV 0x7ff ++ ++#define SDHSTS_BUSY_IRPT 0x400 ++#define SDHSTS_BLOCK_IRPT 0x200 ++#define SDHSTS_SDIO_IRPT 0x100 ++#define SDHSTS_REW_TIME_OUT 0x80 ++#define SDHSTS_CMD_TIME_OUT 0x40 ++#define SDHSTS_CRC16_ERROR 0x20 ++#define SDHSTS_CRC7_ERROR 0x10 ++#define SDHSTS_FIFO_ERROR 0x08 ++/* Reserved */ ++/* Reserved */ ++#define SDHSTS_DATA_FLAG 0x01 ++ ++#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR|SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR) ++#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT|SDHSTS_TRANSFER_ERROR_MASK) ++ ++#define SDHCFG_BUSY_IRPT_EN (1<<10) ++#define SDHCFG_BLOCK_IRPT_EN (1<<8) ++#define SDHCFG_SDIO_IRPT_EN (1<<5) ++#define SDHCFG_DATA_IRPT_EN (1<<4) ++#define SDHCFG_SLOW_CARD (1<<3) ++#define SDHCFG_WIDE_EXT_BUS (1<<2) ++#define SDHCFG_WIDE_INT_BUS (1<<1) ++#define SDHCFG_REL_CMD_LINE (1<<0) ++ ++#define SDEDM_FORCE_DATA_MODE (1<<19) ++#define SDEDM_CLOCK_PULSE (1<<20) ++#define SDEDM_BYPASS (1<<21) ++ ++#define SDEDM_WRITE_THRESHOLD_SHIFT 9 ++#define SDEDM_READ_THRESHOLD_SHIFT 14 ++#define SDEDM_THRESHOLD_MASK 0x1f ++ ++#define SDEDM_FSM_MASK 0xf ++#define SDEDM_FSM_IDENTMODE 0x0 ++#define SDEDM_FSM_DATAMODE 0x1 ++#define SDEDM_FSM_READDATA 0x2 ++#define SDEDM_FSM_WRITEDATA 0x3 ++#define SDEDM_FSM_READWAIT 0x4 ++#define SDEDM_FSM_READCRC 0x5 ++#define SDEDM_FSM_WRITECRC 0x6 ++#define SDEDM_FSM_WRITEWAIT1 0x7 ++#define SDEDM_FSM_POWERDOWN 0x8 ++#define SDEDM_FSM_POWERUP 0x9 ++#define SDEDM_FSM_WRITESTART1 0xa ++#define SDEDM_FSM_WRITESTART2 0xb ++#define SDEDM_FSM_GENPULSES 0xc ++#define SDEDM_FSM_WRITEWAIT2 0xd ++#define SDEDM_FSM_STARTPOWDOWN 0xf ++ ++#define SDDATA_FIFO_WORDS 16 ++ ++#define USE_CMD23_FLAGS ((ALLOW_CMD23_READ * MMC_DATA_READ) | \ ++ (ALLOW_CMD23_WRITE * MMC_DATA_WRITE)) ++ ++#define MHZ 1000000 ++ ++ ++struct bcm2835_host { ++ spinlock_t lock; ++ ++ void __iomem *ioaddr; ++ u32 bus_addr; ++ ++ struct mmc_host *mmc; ++ ++ u32 pio_timeout; /* In jiffies */ ++ ++ int clock; /* Current clock speed */ ++ ++ bool slow_card; /* Force 11-bit divisor */ ++ ++ unsigned int max_clk; /* Max possible freq */ ++ ++ struct tasklet_struct finish_tasklet; /* Tasklet structures */ ++ ++ struct work_struct cmd_wait_wq; /* Workqueue function */ ++ ++ struct timer_list timer; /* Timer for timeouts */ ++ ++ struct sg_mapping_iter sg_miter; /* SG state for PIO */ ++ unsigned int blocks; /* remaining PIO blocks */ ++ ++ int irq; /* Device IRQ */ ++ ++ u32 cmd_quick_poll_retries; ++ u32 ns_per_fifo_word; ++ ++ /* cached registers */ ++ u32 hcfg; ++ u32 cdiv; ++ ++ struct mmc_request *mrq; /* Current request */ ++ struct mmc_command *cmd; /* Current command */ ++ struct mmc_data *data; /* Current data request */ ++ unsigned int data_complete:1; /* Data finished before cmd */ ++ ++ unsigned int flush_fifo:1; /* Drain the fifo when finishing */ ++ ++ unsigned int use_busy:1; /* Wait for busy interrupt */ ++ ++ unsigned int use_sbc:1; /* Send CMD23 */ ++ ++ unsigned int debug:1; /* Enable debug output */ ++ unsigned int firmware_sets_cdiv:1; /* Let the firmware manage the clock */ ++ unsigned int reset_clock:1; /* Reset the clock fore the next request */ ++ ++ /*DMA part*/ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_chan *dma_chan; /* Channel in use */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; ++ struct dma_async_tx_descriptor *dma_desc; ++ u32 dma_dir; ++ u32 drain_words; ++ struct page *drain_page; ++ u32 drain_offset; ++ ++ bool allow_dma; ++ bool use_dma; ++ /*end of DMA part*/ ++ ++ int max_delay; /* maximum length of time spent waiting */ ++ struct timeval stop_time; /* when the last stop was issued */ ++ u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */ ++ u32 delay_after_this_stop; /* minimum time between this stop and subsequent data transfer */ ++ u32 user_overclock_50; /* User's preferred frequency to use when 50MHz is requested (in MHz) */ ++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ ++ u32 overclock; /* Current frequency if overclocked, else zero */ ++ u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */ ++ ++ u32 sectors; /* Cached card size in sectors */ ++}; ++ ++#if ENABLE_LOG ++ ++struct log_entry_struct { ++ char event[4]; ++ u32 timestamp; ++ u32 param1; ++ u32 param2; ++}; ++ ++typedef struct log_entry_struct LOG_ENTRY_T; ++ ++LOG_ENTRY_T *sdhost_log_buf; ++dma_addr_t sdhost_log_addr; ++static u32 sdhost_log_idx; ++static spinlock_t log_lock; ++static void __iomem *timer_base; ++ ++#define LOG_ENTRIES (256*1) ++#define LOG_SIZE (sizeof(LOG_ENTRY_T)*LOG_ENTRIES) ++ ++static void log_init(struct device *dev, u32 bus_to_phys) ++{ ++ spin_lock_init(&log_lock); ++ sdhost_log_buf = dma_zalloc_coherent(dev, LOG_SIZE, &sdhost_log_addr, ++ GFP_KERNEL); ++ if (sdhost_log_buf) { ++ pr_info("sdhost: log_buf @ %p (%x)\n", ++ sdhost_log_buf, sdhost_log_addr); ++ timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); ++ if (!timer_base) ++ pr_err("sdhost: failed to remap timer\n"); ++ } ++ else ++ pr_err("sdhost: failed to allocate log buf\n"); ++} ++ ++static void log_event_impl(const char *event, u32 param1, u32 param2) ++{ ++ if (sdhost_log_buf) { ++ LOG_ENTRY_T *entry; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&log_lock, flags); ++ ++ entry = sdhost_log_buf + sdhost_log_idx; ++ memcpy(entry->event, event, 4); ++ entry->timestamp = (readl(timer_base + 4) & 0x3fffffff) + ++ (smp_processor_id()<<30); ++ entry->param1 = param1; ++ entry->param2 = param2; ++ sdhost_log_idx = (sdhost_log_idx + 1) % LOG_ENTRIES; ++ ++ spin_unlock_irqrestore(&log_lock, flags); ++ } ++} ++ ++static void log_dump(void) ++{ ++ if (sdhost_log_buf) { ++ LOG_ENTRY_T *entry; ++ unsigned long flags; ++ int idx; ++ ++ spin_lock_irqsave(&log_lock, flags); ++ ++ idx = sdhost_log_idx; ++ do { ++ entry = sdhost_log_buf + idx; ++ if (entry->event[0] != '\0') ++ pr_info("[%08x] %.4s %x %x\n", ++ entry->timestamp, ++ entry->event, ++ entry->param1, ++ entry->param2); ++ idx = (idx + 1) % LOG_ENTRIES; ++ } while (idx != sdhost_log_idx); ++ ++ spin_unlock_irqrestore(&log_lock, flags); ++ } ++} ++ ++#define log_event(event, param1, param2) log_event_impl(event, param1, param2) ++ ++#else ++ ++#define log_init(x) (void)0 ++#define log_event(event, param1, param2) (void)0 ++#define log_dump() (void)0 ++ ++#endif ++ ++static inline void bcm2835_sdhost_write(struct bcm2835_host *host, u32 val, int reg) ++{ ++ writel(val, host->ioaddr + reg); ++} ++ ++static inline u32 bcm2835_sdhost_read(struct bcm2835_host *host, int reg) ++{ ++ return readl(host->ioaddr + reg); ++} ++ ++static inline u32 bcm2835_sdhost_read_relaxed(struct bcm2835_host *host, int reg) ++{ ++ return readl_relaxed(host->ioaddr + reg); ++} ++ ++static void bcm2835_sdhost_dumpcmd(struct bcm2835_host *host, ++ struct mmc_command *cmd, ++ const char *label) ++{ ++ if (cmd) ++ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n", ++ mmc_hostname(host->mmc), ++ (cmd == host->cmd) ? '>' : ' ', ++ label, cmd->opcode, cmd->arg, cmd->flags, ++ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], ++ cmd->error); ++} ++ ++static void bcm2835_sdhost_dumpregs(struct bcm2835_host *host) ++{ ++ if (host->mrq) ++ { ++ bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc"); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd"); ++ if (host->mrq->data) ++ pr_info("%s: data blocks %x blksz %x - err %d\n", ++ mmc_hostname(host->mmc), ++ host->mrq->data->blocks, ++ host->mrq->data->blksz, ++ host->mrq->data->error); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop"); ++ } ++ ++ pr_info("%s: =========== REGISTER DUMP ===========\n", ++ mmc_hostname(host->mmc)); ++ ++ pr_info("%s: SDCMD 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCMD)); ++ pr_info("%s: SDARG 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDARG)); ++ pr_info("%s: SDTOUT 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDTOUT)); ++ pr_info("%s: SDCDIV 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCDIV)); ++ pr_info("%s: SDRSP0 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP0)); ++ pr_info("%s: SDRSP1 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP1)); ++ pr_info("%s: SDRSP2 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP2)); ++ pr_info("%s: SDRSP3 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP3)); ++ pr_info("%s: SDHSTS 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHSTS)); ++ pr_info("%s: SDVDD 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDVDD)); ++ pr_info("%s: SDEDM 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDEDM)); ++ pr_info("%s: SDHCFG 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHCFG)); ++ pr_info("%s: SDHBCT 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHBCT)); ++ pr_info("%s: SDHBLC 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHBLC)); ++ ++ pr_info("%s: ===========================================\n", ++ mmc_hostname(host->mmc)); ++} ++ ++static void bcm2835_sdhost_set_power(struct bcm2835_host *host, bool on) ++{ ++ bcm2835_sdhost_write(host, on ? 1 : 0, SDVDD); ++} ++ ++static void bcm2835_sdhost_reset_internal(struct bcm2835_host *host) ++{ ++ u32 temp; ++ ++ if (host->debug) ++ pr_info("%s: reset\n", mmc_hostname(host->mmc)); ++ ++ bcm2835_sdhost_set_power(host, false); ++ ++ bcm2835_sdhost_write(host, 0, SDCMD); ++ bcm2835_sdhost_write(host, 0, SDARG); ++ bcm2835_sdhost_write(host, 0xf00000, SDTOUT); ++ bcm2835_sdhost_write(host, 0, SDCDIV); ++ bcm2835_sdhost_write(host, 0x7f8, SDHSTS); /* Write 1s to clear */ ++ bcm2835_sdhost_write(host, 0, SDHCFG); ++ bcm2835_sdhost_write(host, 0, SDHBCT); ++ bcm2835_sdhost_write(host, 0, SDHBLC); ++ ++ /* Limit fifo usage due to silicon bug */ ++ temp = bcm2835_sdhost_read(host, SDEDM); ++ temp &= ~((SDEDM_THRESHOLD_MASK<clock = 0; ++ host->sectors = 0; ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ bcm2835_sdhost_write(host, SDCDIV_MAX_CDIV, SDCDIV); ++ mmiowb(); ++} ++ ++static void bcm2835_sdhost_reset(struct mmc_host *mmc) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("RST<", 0, 0); ++ ++ bcm2835_sdhost_reset_internal(host); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); ++ ++static void bcm2835_sdhost_init(struct bcm2835_host *host, int soft) ++{ ++ pr_debug("bcm2835_sdhost_init(%d)\n", soft); ++ ++ /* Set interrupt enables */ ++ host->hcfg = SDHCFG_BUSY_IRPT_EN; ++ ++ bcm2835_sdhost_reset_internal(host); ++ ++ if (soft) { ++ /* force clock reconfiguration */ ++ host->clock = 0; ++ bcm2835_sdhost_set_ios(host->mmc, &host->mmc->ios); ++ } ++} ++ ++static void bcm2835_sdhost_wait_transfer_complete(struct bcm2835_host *host) ++{ ++ int timediff; ++ u32 alternate_idle; ++ u32 edm; ++ ++ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ? ++ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1; ++ ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ ++ log_event("WTC<", edm, 0); ++ ++ timediff = 0; ++ ++ while (1) { ++ u32 fsm = edm & SDEDM_FSM_MASK; ++ if ((fsm == SDEDM_FSM_IDENTMODE) || ++ (fsm == SDEDM_FSM_DATAMODE)) ++ break; ++ if (fsm == alternate_idle) { ++ bcm2835_sdhost_write(host, ++ edm | SDEDM_FORCE_DATA_MODE, ++ SDEDM); ++ break; ++ } ++ ++ timediff++; ++ if (timediff == 100000) { ++ pr_err("%s: wait_transfer_complete - still waiting after %d retries\n", ++ mmc_hostname(host->mmc), ++ timediff); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ host->mrq->data->error = -ETIMEDOUT; ++ log_event("WTC!", edm, 0); ++ return; ++ } ++ cpu_relax(); ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ } ++ log_event("WTC>", edm, 0); ++} ++ ++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host); ++ ++static void bcm2835_sdhost_dma_complete(void *param) ++{ ++ struct bcm2835_host *host = param; ++ struct mmc_data *data = host->data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("DMA<", (u32)host->data, bcm2835_sdhost_read(host, SDHSTS)); ++ log_event("DMA ", bcm2835_sdhost_read(host, SDCMD), ++ bcm2835_sdhost_read(host, SDEDM)); ++ ++ if (host->dma_chan) { ++ dma_unmap_sg(host->dma_chan->device->dev, ++ data->sg, data->sg_len, ++ host->dma_dir); ++ ++ host->dma_chan = NULL; ++ } ++ ++ if (host->drain_words) { ++ void *page; ++ u32 *buf; ++ ++ page = kmap_atomic(host->drain_page); ++ buf = page + host->drain_offset; ++ ++ while (host->drain_words) { ++ u32 edm = bcm2835_sdhost_read(host, SDEDM); ++ if ((edm >> 4) & 0x1f) ++ *(buf++) = bcm2835_sdhost_read(host, ++ SDDATA); ++ host->drain_words--; ++ } ++ ++ kunmap_atomic(page); ++ } ++ ++ bcm2835_sdhost_finish_data(host); ++ ++ log_event("DMA>", (u32)host->data, 0); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_read_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len; ++ u32 *buf; ++ unsigned long wait_max; ++ ++ blksize = host->data->blksz; ++ ++ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ int copy_words; ++ u32 hsts = 0; ++ ++ if (!sg_miter_next(&host->sg_miter)) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ len = min(host->sg_miter.length, blksize); ++ if (len % 4) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = (u32 *)host->sg_miter.addr; ++ ++ copy_words = len/4; ++ ++ while (copy_words) { ++ int burst_words, words; ++ u32 edm; ++ ++ burst_words = SDDATA_FIFO_PIO_BURST; ++ if (burst_words > copy_words) ++ burst_words = copy_words; ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ words = ((edm >> 4) & 0x1f); ++ ++ if (words < burst_words) { ++ int fsm_state = (edm & SDEDM_FSM_MASK); ++ if ((fsm_state != SDEDM_FSM_READDATA) && ++ (fsm_state != SDEDM_FSM_READWAIT) && ++ (fsm_state != SDEDM_FSM_READCRC)) { ++ hsts = bcm2835_sdhost_read(host, ++ SDHSTS); ++ pr_info("%s: fsm %x, hsts %x\n", ++ mmc_hostname(host->mmc), ++ fsm_state, hsts); ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ if (time_after(jiffies, wait_max)) { ++ pr_err("%s: PIO read timeout - EDM %x\n", ++ mmc_hostname(host->mmc), ++ edm); ++ hsts = SDHSTS_REW_TIME_OUT; ++ break; ++ } ++ ndelay((burst_words - words) * ++ host->ns_per_fifo_word); ++ continue; ++ } else if (words > copy_words) { ++ words = copy_words; ++ } ++ ++ copy_words -= words; ++ ++ while (words) { ++ *(buf++) = bcm2835_sdhost_read(host, SDDATA); ++ words--; ++ } ++ } ++ ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_sdhost_write_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len; ++ u32 *buf; ++ unsigned long wait_max; ++ ++ blksize = host->data->blksz; ++ ++ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ int copy_words; ++ u32 hsts = 0; ++ ++ if (!sg_miter_next(&host->sg_miter)) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ len = min(host->sg_miter.length, blksize); ++ if (len % 4) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = (u32 *)host->sg_miter.addr; ++ ++ copy_words = len/4; ++ ++ while (copy_words) { ++ int burst_words, words; ++ u32 edm; ++ ++ burst_words = SDDATA_FIFO_PIO_BURST; ++ if (burst_words > copy_words) ++ burst_words = copy_words; ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f); ++ ++ if (words < burst_words) { ++ int fsm_state = (edm & SDEDM_FSM_MASK); ++ if ((fsm_state != SDEDM_FSM_WRITEDATA) && ++ (fsm_state != SDEDM_FSM_WRITESTART1) && ++ (fsm_state != SDEDM_FSM_WRITESTART2)) { ++ hsts = bcm2835_sdhost_read(host, ++ SDHSTS); ++ pr_info("%s: fsm %x, hsts %x\n", ++ mmc_hostname(host->mmc), ++ fsm_state, hsts); ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ if (time_after(jiffies, wait_max)) { ++ pr_err("%s: PIO write timeout - EDM %x\n", ++ mmc_hostname(host->mmc), ++ edm); ++ hsts = SDHSTS_REW_TIME_OUT; ++ break; ++ } ++ ndelay((burst_words - words) * ++ host->ns_per_fifo_word); ++ continue; ++ } else if (words > copy_words) { ++ words = copy_words; ++ } ++ ++ copy_words -= words; ++ ++ while (words) { ++ bcm2835_sdhost_write(host, *(buf++), SDDATA); ++ words--; ++ } ++ } ++ ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_sdhost_transfer_pio(struct bcm2835_host *host) ++{ ++ u32 sdhsts; ++ bool is_read; ++ BUG_ON(!host->data); ++ log_event("XFP<", (u32)host->data, host->blocks); ++ ++ is_read = (host->data->flags & MMC_DATA_READ) != 0; ++ if (is_read) ++ bcm2835_sdhost_read_block_pio(host); ++ else ++ bcm2835_sdhost_write_block_pio(host); ++ ++ sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ if (sdhsts & (SDHSTS_CRC16_ERROR | ++ SDHSTS_CRC7_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ pr_err("%s: %s transfer error - HSTS %x\n", ++ mmc_hostname(host->mmc), ++ is_read ? "read" : "write", ++ sdhsts); ++ host->data->error = -EILSEQ; ++ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT | ++ SDHSTS_REW_TIME_OUT))) { ++ pr_err("%s: %s timeout error - HSTS %x\n", ++ mmc_hostname(host->mmc), ++ is_read ? "read" : "write", ++ sdhsts); ++ host->data->error = -ETIMEDOUT; ++ } ++ log_event("XFP>", (u32)host->data, host->blocks); ++} ++ ++static void bcm2835_sdhost_prepare_dma(struct bcm2835_host *host, ++ struct mmc_data *data) ++{ ++ int len, dir_data, dir_slave; ++ struct dma_async_tx_descriptor *desc = NULL; ++ struct dma_chan *dma_chan; ++ ++ log_event("PRD<", (u32)data, 0); ++ pr_debug("bcm2835_sdhost_prepare_dma()\n"); ++ ++ dma_chan = host->dma_chan_rxtx; ++ if (data->flags & MMC_DATA_READ) { ++ dir_data = DMA_FROM_DEVICE; ++ dir_slave = DMA_DEV_TO_MEM; ++ } else { ++ dir_data = DMA_TO_DEVICE; ++ dir_slave = DMA_MEM_TO_DEV; ++ } ++ log_event("PRD1", (u32)dma_chan, 0); ++ ++ BUG_ON(!dma_chan->device); ++ BUG_ON(!dma_chan->device->dev); ++ BUG_ON(!data->sg); ++ ++ /* The block doesn't manage the FIFO DREQs properly for multi-block ++ transfers, so don't attempt to DMA the final few words. ++ Unfortunately this requires the final sg entry to be trimmed. ++ N.B. This code demands that the overspill is contained in ++ a single sg entry. ++ */ ++ ++ host->drain_words = 0; ++ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) { ++ struct scatterlist *sg; ++ u32 len; ++ int i; ++ ++ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4, ++ (u32)data->blocks * data->blksz); ++ ++ for_each_sg(data->sg, sg, data->sg_len, i) { ++ if (sg_is_last(sg)) { ++ BUG_ON(sg->length < len); ++ sg->length -= len; ++ host->drain_page = sg_page(sg); ++ host->drain_offset = sg->offset + sg->length; ++ } ++ } ++ host->drain_words = len/4; ++ } ++ ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ ++ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, ++ dir_data); ++ ++ log_event("PRD2", len, 0); ++ if (len > 0) ++ desc = dmaengine_prep_slave_sg(dma_chan, data->sg, ++ len, dir_slave, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); ++ log_event("PRD3", (u32)desc, 0); ++ ++ if (desc) { ++ desc->callback = bcm2835_sdhost_dma_complete; ++ desc->callback_param = host; ++ host->dma_desc = desc; ++ host->dma_chan = dma_chan; ++ host->dma_dir = dir_data; ++ } ++ log_event("PDM>", (u32)data, 0); ++} ++ ++static void bcm2835_sdhost_start_dma(struct bcm2835_host *host) ++{ ++ log_event("SDMA", (u32)host->data, (u32)host->dma_chan); ++ dmaengine_submit(host->dma_desc); ++ dma_async_issue_pending(host->dma_chan); ++} ++ ++static void bcm2835_sdhost_set_transfer_irqs(struct bcm2835_host *host) ++{ ++ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ if (host->dma_desc) ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_BUSY_IRPT_EN; ++ else ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_DATA_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++} ++ ++static void bcm2835_sdhost_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ struct mmc_data *data = cmd->data; ++ ++ WARN_ON(host->data); ++ ++ host->data = data; ++ if (!data) ++ return; ++ ++ /* Sanity checks */ ++ BUG_ON(data->blksz * data->blocks > 524288); ++ BUG_ON(data->blksz > host->mmc->max_blk_size); ++ BUG_ON(data->blocks > 65535); ++ ++ host->data_complete = 0; ++ host->flush_fifo = 0; ++ host->data->bytes_xfered = 0; ++ ++ if (!host->sectors && host->mmc->card) { ++ struct mmc_card *card = host->mmc->card; ++ if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { ++ /* ++ * The EXT_CSD sector count is in number of 512 byte ++ * sectors. ++ */ ++ host->sectors = card->ext_csd.sectors; ++ } else { ++ /* ++ * The CSD capacity field is in units of read_blkbits. ++ * set_capacity takes units of 512 bytes. ++ */ ++ host->sectors = card->csd.capacity << ++ (card->csd.read_blkbits - 9); ++ } ++ } ++ ++ if (!host->dma_desc) { ++ /* Use PIO */ ++ int flags = SG_MITER_ATOMIC; ++ ++ if (data->flags & MMC_DATA_READ) ++ flags |= SG_MITER_TO_SG; ++ else ++ flags |= SG_MITER_FROM_SG; ++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); ++ host->blocks = data->blocks; ++ } ++ ++ bcm2835_sdhost_set_transfer_irqs(host); ++ ++ bcm2835_sdhost_write(host, data->blksz, SDHBCT); ++ bcm2835_sdhost_write(host, data->blocks, SDHBLC); ++ ++ BUG_ON(!host->data); ++} ++ ++bool bcm2835_sdhost_send_command(struct bcm2835_host *host, ++ struct mmc_command *cmd) ++{ ++ u32 sdcmd, sdhsts; ++ unsigned long timeout; ++ int delay; ++ ++ WARN_ON(host->cmd); ++ log_event("CMD<", cmd->opcode, cmd->arg); ++ ++ if (cmd->data) ++ pr_debug("%s: send_command %d 0x%x " ++ "(flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_debug("%s: send_command %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags); ++ ++ /* Wait max 100 ms */ ++ timeout = 10000; ++ ++ while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) { ++ if (timeout == 0) { ++ pr_warn("%s: previous command never completed.\n", ++ mmc_hostname(host->mmc)); ++ if (host->debug) ++ bcm2835_sdhost_dumpregs(host); ++ cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ return false; ++ } ++ timeout--; ++ udelay(10); ++ } ++ ++ delay = (10000 - timeout)/100; ++ if (delay > host->max_delay) { ++ host->max_delay = delay; ++ pr_warning("%s: controller hung for %d ms\n", ++ mmc_hostname(host->mmc), ++ host->max_delay); ++ } ++ ++ timeout = jiffies; ++ if (!cmd->data && cmd->busy_timeout > 9000) ++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; ++ else ++ timeout += 10 * HZ; ++ mod_timer(&host->timer, timeout); ++ ++ host->cmd = cmd; ++ ++ /* Clear any error flags */ ++ sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ if (sdhsts & SDHSTS_ERROR_MASK) ++ bcm2835_sdhost_write(host, sdhsts, SDHSTS); ++ ++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { ++ pr_err("%s: unsupported response type!\n", ++ mmc_hostname(host->mmc)); ++ cmd->error = -EINVAL; ++ tasklet_schedule(&host->finish_tasklet); ++ return false; ++ } ++ ++ bcm2835_sdhost_prepare_data(host, cmd); ++ ++ bcm2835_sdhost_write(host, cmd->arg, SDARG); ++ ++ sdcmd = cmd->opcode & SDCMD_CMD_MASK; ++ ++ host->use_busy = 0; ++ if (!(cmd->flags & MMC_RSP_PRESENT)) { ++ sdcmd |= SDCMD_NO_RESPONSE; ++ } else { ++ if (cmd->flags & MMC_RSP_136) ++ sdcmd |= SDCMD_LONG_RESPONSE; ++ if (cmd->flags & MMC_RSP_BUSY) { ++ sdcmd |= SDCMD_BUSYWAIT; ++ host->use_busy = 1; ++ } ++ } ++ ++ if (cmd->data) { ++ log_event("CMDD", cmd->data->blocks, cmd->data->blksz); ++ if (host->delay_after_this_stop) { ++ struct timeval now; ++ int time_since_stop; ++ do_gettimeofday(&now); ++ time_since_stop = (now.tv_sec - host->stop_time.tv_sec); ++ if (time_since_stop < 2) { ++ /* Possibly less than one second */ ++ time_since_stop = time_since_stop * 1000000 + ++ (now.tv_usec - host->stop_time.tv_usec); ++ if (time_since_stop < ++ host->delay_after_this_stop) ++ udelay(host->delay_after_this_stop - ++ time_since_stop); ++ } ++ } ++ ++ host->delay_after_this_stop = host->delay_after_stop; ++ if ((cmd->data->flags & MMC_DATA_READ) && !host->use_sbc) { ++ /* See if read crosses one of the hazardous sectors */ ++ u32 first_blk, last_blk; ++ ++ /* Intentionally include the following sector because ++ without CMD23/SBC the read may run on. */ ++ first_blk = host->mrq->cmd->arg; ++ last_blk = first_blk + cmd->data->blocks; ++ ++ if (((last_blk >= (host->sectors - 64)) && ++ (first_blk <= (host->sectors - 64))) || ++ ((last_blk >= (host->sectors - 32)) && ++ (first_blk <= (host->sectors - 32)))) { ++ host->delay_after_this_stop = ++ max(250u, host->delay_after_stop); ++ } ++ } ++ ++ if (cmd->data->flags & MMC_DATA_WRITE) ++ sdcmd |= SDCMD_WRITE_CMD; ++ if (cmd->data->flags & MMC_DATA_READ) ++ sdcmd |= SDCMD_READ_CMD; ++ } ++ ++ bcm2835_sdhost_write(host, sdcmd | SDCMD_NEW_FLAG, SDCMD); ++ ++ return true; ++} ++ ++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, ++ unsigned long *irq_flags); ++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host); ++ ++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ data = host->data; ++ BUG_ON(!data); ++ ++ log_event("FDA<", (u32)host->mrq, (u32)host->cmd); ++ pr_debug("finish_data(error %d, stop %d, sbc %d)\n", ++ data->error, data->stop ? 1 : 0, ++ host->mrq->sbc ? 1 : 0); ++ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN); ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ ++ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks); ++ ++ host->data_complete = 1; ++ ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ pr_debug("Finished early - HSTS %x\n", ++ bcm2835_sdhost_read(host, SDHSTS)); ++ } ++ else ++ bcm2835_sdhost_transfer_complete(host); ++ log_event("FDA>", (u32)host->mrq, (u32)host->cmd); ++} ++ ++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ BUG_ON(host->cmd); ++ BUG_ON(!host->data); ++ BUG_ON(!host->data_complete); ++ ++ data = host->data; ++ host->data = NULL; ++ ++ log_event("TCM<", (u32)data, data->error); ++ pr_debug("transfer_complete(error %d, stop %d)\n", ++ data->error, data->stop ? 1 : 0); ++ ++ /* ++ * Need to send CMD12 if - ++ * a) open-ended multiblock transfer (no CMD23) ++ * b) error in multiblock transfer ++ */ ++ if (host->mrq->stop && (data->error || !host->use_sbc)) { ++ if (bcm2835_sdhost_send_command(host, host->mrq->stop)) { ++ /* No busy, so poll for completion */ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, NULL); ++ ++ if (host->delay_after_this_stop) ++ do_gettimeofday(&host->stop_time); ++ } ++ } else { ++ bcm2835_sdhost_wait_transfer_complete(host); ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ log_event("TCM>", (u32)data, 0); ++} ++ ++/* If irq_flags is valid, the caller is in a thread context and is allowed ++ to sleep */ ++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, ++ unsigned long *irq_flags) ++{ ++ u32 sdcmd; ++ u32 retries; ++#ifdef DEBUG ++ struct timeval before, after; ++ int timediff = 0; ++#endif ++ ++ log_event("FCM<", (u32)host->mrq, (u32)host->cmd); ++ pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD)); ++ ++ BUG_ON(!host->cmd || !host->mrq); ++ ++ /* Poll quickly at first */ ++ ++ retries = host->cmd_quick_poll_retries; ++ if (!retries) { ++ /* Work out how many polls take 1us by timing 10us */ ++ struct timeval start, now; ++ int us_diff; ++ ++ retries = 1; ++ do { ++ int i; ++ ++ retries *= 2; ++ ++ do_gettimeofday(&start); ++ ++ for (i = 0; i < retries; i++) { ++ cpu_relax(); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ } ++ ++ do_gettimeofday(&now); ++ us_diff = (now.tv_sec - start.tv_sec) * 1000000 + ++ (now.tv_usec - start.tv_usec); ++ } while (us_diff < 10); ++ ++ host->cmd_quick_poll_retries = ((retries * us_diff + 9)*CMD_DALLY_US)/10 + 1; ++ retries = 1; // We've already waited long enough this time ++ } ++ ++ for (sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ (sdcmd & SDCMD_NEW_FLAG) && retries; ++ retries--) { ++ cpu_relax(); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ } ++ ++ if (!retries) { ++ unsigned long wait_max; ++ ++ if (!irq_flags) { ++ /* Schedule the work */ ++ log_event("CWWQ", 0, 0); ++ schedule_work(&host->cmd_wait_wq); ++ return; ++ } ++ ++ /* Wait max 100 ms */ ++ wait_max = jiffies + msecs_to_jiffies(100); ++ while (time_before(jiffies, wait_max)) { ++ spin_unlock_irqrestore(&host->lock, *irq_flags); ++ usleep_range(1, 10); ++ spin_lock_irqsave(&host->lock, *irq_flags); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ if (!(sdcmd & SDCMD_NEW_FLAG)) ++ break; ++ } ++ } ++ ++ /* Check for errors */ ++ if (sdcmd & SDCMD_NEW_FLAG) { ++ if (host->debug) { ++ pr_err("%s: command %d never completed.\n", ++ mmc_hostname(host->mmc), host->cmd->opcode); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ host->cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } else if (sdcmd & SDCMD_FAIL_FLAG) { ++ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ ++ /* Clear the errors */ ++ bcm2835_sdhost_write(host, SDHSTS_ERROR_MASK, SDHSTS); ++ ++ if (host->debug) ++ pr_info("%s: error detected - CMD %x, HSTS %03x, EDM %x\n", ++ mmc_hostname(host->mmc), sdcmd, sdhsts, ++ bcm2835_sdhost_read(host, SDEDM)); ++ ++ if ((sdhsts & SDHSTS_CRC7_ERROR) && ++ (host->cmd->opcode == 1)) { ++ if (host->debug) ++ pr_info("%s: ignoring CRC7 error for CMD1\n", ++ mmc_hostname(host->mmc)); ++ } else { ++ if (sdhsts & SDHSTS_CMD_TIME_OUT) { ++ if (host->debug) ++ pr_warn("%s: command %d timeout\n", ++ mmc_hostname(host->mmc), ++ host->cmd->opcode); ++ host->cmd->error = -ETIMEDOUT; ++ } else { ++ pr_warn("%s: unexpected command %d error\n", ++ mmc_hostname(host->mmc), ++ host->cmd->opcode); ++ host->cmd->error = -EILSEQ; ++ } ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ } ++ ++ if (host->cmd->flags & MMC_RSP_PRESENT) { ++ if (host->cmd->flags & MMC_RSP_136) { ++ int i; ++ for (i = 0; i < 4; i++) ++ host->cmd->resp[3 - i] = bcm2835_sdhost_read(host, SDRSP0 + i*4); ++ pr_debug("%s: finish_command %08x %08x %08x %08x\n", ++ mmc_hostname(host->mmc), ++ host->cmd->resp[0], host->cmd->resp[1], host->cmd->resp[2], host->cmd->resp[3]); ++ log_event("RSP ", host->cmd->resp[0], host->cmd->resp[1]); ++ } else { ++ host->cmd->resp[0] = bcm2835_sdhost_read(host, SDRSP0); ++ pr_debug("%s: finish_command %08x\n", ++ mmc_hostname(host->mmc), ++ host->cmd->resp[0]); ++ log_event("RSP ", host->cmd->resp[0], 0); ++ } ++ } ++ ++ if (host->cmd == host->mrq->sbc) { ++ /* Finished CMD23, now send actual command. */ ++ host->cmd = NULL; ++ if (bcm2835_sdhost_send_command(host, host->mrq->cmd)) { ++ if (host->data && host->dma_desc) ++ /* DMA transfer starts now, PIO starts after irq */ ++ bcm2835_sdhost_start_dma(host); ++ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, NULL); ++ } ++ } else if (host->cmd == host->mrq->stop) { ++ /* Finished CMD12 */ ++ tasklet_schedule(&host->finish_tasklet); ++ } else { ++ /* Processed actual command. */ ++ host->cmd = NULL; ++ if (!host->data) ++ tasklet_schedule(&host->finish_tasklet); ++ else if (host->data_complete) ++ bcm2835_sdhost_transfer_complete(host); ++ } ++ log_event("FCM>", (u32)host->mrq, (u32)host->cmd); ++} ++ ++static void bcm2835_sdhost_timeout(unsigned long data) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = (struct bcm2835_host *)data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("TIM<", 0, 0); ++ ++ if (host->mrq) { ++ pr_err("%s: timeout waiting for hardware interrupt.\n", ++ mmc_hostname(host->mmc)); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ ++ if (host->data) { ++ host->data->error = -ETIMEDOUT; ++ bcm2835_sdhost_finish_data(host); ++ } else { ++ if (host->cmd) ++ host->cmd->error = -ETIMEDOUT; ++ else ++ host->mrq->cmd->error = -ETIMEDOUT; ++ ++ pr_debug("timeout_timer tasklet_schedule\n"); ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ } ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ log_event("IRQB", (u32)host->cmd, intmask); ++ if (!host->cmd) { ++ pr_err("%s: got command busy interrupt 0x%08x even " ++ "though no command operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ ++ if (!host->use_busy) { ++ pr_err("%s: got command busy interrupt 0x%08x even " ++ "though not expecting one.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ host->use_busy = 0; ++ ++ if (intmask & SDHSTS_ERROR_MASK) ++ { ++ pr_err("sdhost_busy_irq: intmask %x, data %p\n", intmask, host->mrq->data); ++ if (intmask & SDHSTS_CRC7_ERROR) ++ host->cmd->error = -EILSEQ; ++ else if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ if (host->mrq->data) ++ host->mrq->data->error = -EILSEQ; ++ else ++ host->cmd->error = -EILSEQ; ++ } else if (intmask & SDHSTS_REW_TIME_OUT) { ++ if (host->mrq->data) ++ host->mrq->data->error = -ETIMEDOUT; ++ else ++ host->cmd->error = -ETIMEDOUT; ++ } else if (intmask & SDHSTS_CMD_TIME_OUT) ++ host->cmd->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ else ++ bcm2835_sdhost_finish_command(host, NULL); ++} ++ ++static void bcm2835_sdhost_data_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ /* There are no dedicated data/space available interrupt ++ status bits, so it is necessary to use the single shared ++ data/space available FIFO status bits. It is therefore not ++ an error to get here when there is no data transfer in ++ progress. */ ++ log_event("IRQD", (u32)host->data, intmask); ++ if (!host->data) ++ return; ++ ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ ++ if (host->data->error) { ++ bcm2835_sdhost_finish_data(host); ++ } else if (host->data->flags & MMC_DATA_WRITE) { ++ /* Use the block interrupt for writes after the first block */ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN); ++ host->hcfg |= SDHCFG_BLOCK_IRPT_EN; ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ bcm2835_sdhost_transfer_pio(host); ++ } else { ++ bcm2835_sdhost_transfer_pio(host); ++ host->blocks--; ++ if ((host->blocks == 0) || host->data->error) ++ bcm2835_sdhost_finish_data(host); ++ } ++} ++ ++static void bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ log_event("IRQK", (u32)host->data, intmask); ++ if (!host->data) { ++ pr_err("%s: got block interrupt 0x%08x even " ++ "though no data operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ ++ if (!host->dma_desc) { ++ BUG_ON(!host->blocks); ++ if (host->data->error || (--host->blocks == 0)) { ++ bcm2835_sdhost_finish_data(host); ++ } else { ++ bcm2835_sdhost_transfer_pio(host); ++ } ++ } else if (host->data->flags & MMC_DATA_WRITE) { ++ bcm2835_sdhost_finish_data(host); ++ } ++} ++ ++static irqreturn_t bcm2835_sdhost_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct bcm2835_host *host = dev_id; ++ u32 intmask; ++ ++ spin_lock(&host->lock); ++ ++ intmask = bcm2835_sdhost_read(host, SDHSTS); ++ log_event("IRQ<", intmask, 0); ++ ++ bcm2835_sdhost_write(host, ++ SDHSTS_BUSY_IRPT | ++ SDHSTS_BLOCK_IRPT | ++ SDHSTS_SDIO_IRPT | ++ SDHSTS_DATA_FLAG, ++ SDHSTS); ++ ++ if (intmask & SDHSTS_BLOCK_IRPT) { ++ bcm2835_sdhost_block_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ if (intmask & SDHSTS_BUSY_IRPT) { ++ bcm2835_sdhost_busy_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ /* There is no true data interrupt status bit, so it is ++ necessary to qualify the data flag with the interrupt ++ enable bit */ ++ if ((intmask & SDHSTS_DATA_FLAG) && ++ (host->hcfg & SDHCFG_DATA_IRPT_EN)) { ++ bcm2835_sdhost_data_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ mmiowb(); ++ ++ log_event("IRQ>", bcm2835_sdhost_read(host, SDHSTS), 0); ++ spin_unlock(&host->lock); ++ ++ return result; ++} ++ ++void bcm2835_sdhost_set_clock(struct bcm2835_host *host, unsigned int clock) ++{ ++ int div = 0; /* Initialized for compiler warning */ ++ unsigned int input_clock = clock; ++ unsigned long flags; ++ ++ if (host->debug) ++ pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock); ++ ++ if ((host->overclock_50 > 50) && ++ (clock == 50*MHZ)) ++ clock = host->overclock_50 * MHZ + (MHZ - 1); ++ ++ /* The SDCDIV register has 11 bits, and holds (div - 2). ++ But in data mode the max is 50MHz wihout a minimum, and only the ++ bottom 3 bits are used. Since the switch over is automatic (unless ++ we have marked the card as slow...), chosen values have to make ++ sense in both modes. ++ Ident mode must be 100-400KHz, so can range check the requested ++ clock. CMD15 must be used to return to data mode, so this can be ++ monitored. ++ ++ clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz ++ 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz ++ ++ 623->400KHz/27.8MHz ++ reset value (507)->491159/50MHz ++ ++ BUT, the 3-bit clock divisor in data mode is too small if the ++ core clock is higher than 250MHz, so instead use the SLOW_CARD ++ configuration bit to force the use of the ident clock divisor ++ at all times. ++ */ ++ ++ host->mmc->actual_clock = 0; ++ ++ if (host->firmware_sets_cdiv) { ++ u32 msg[3] = { clock, 0, 0 }; ++ ++ rpi_firmware_property(rpi_firmware_get(NULL), ++ RPI_FIRMWARE_SET_SDHOST_CLOCK, ++ &msg, sizeof(msg)); ++ ++ clock = max(msg[1], msg[2]); ++ spin_lock_irqsave(&host->lock, flags); ++ } else { ++ spin_lock_irqsave(&host->lock, flags); ++ if (clock < 100000) { ++ /* Can't stop the clock, but make it as slow as ++ * possible to show willing ++ */ ++ host->cdiv = SDCDIV_MAX_CDIV; ++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ div = host->max_clk / clock; ++ if (div < 2) ++ div = 2; ++ if ((host->max_clk / div) > clock) ++ div++; ++ div -= 2; ++ ++ if (div > SDCDIV_MAX_CDIV) ++ div = SDCDIV_MAX_CDIV; ++ ++ clock = host->max_clk / (div + 2); ++ ++ host->cdiv = div; ++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); ++ ++ if (host->debug) ++ pr_info("%s: clock=%d -> max_clk=%d, cdiv=%x " ++ "(actual clock %d)\n", ++ mmc_hostname(host->mmc), input_clock, ++ host->max_clk, host->cdiv, ++ clock); ++ } ++ ++ /* Calibrate some delays */ ++ ++ host->ns_per_fifo_word = (1000000000/clock) * ++ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); ++ ++ if (input_clock == 50 * MHZ) { ++ if (clock > input_clock) { ++ /* Save the closest value, to make it easier ++ to reduce in the event of error */ ++ host->overclock_50 = (clock/MHZ); ++ ++ if (clock != host->overclock) { ++ pr_info("%s: overclocking to %dHz\n", ++ mmc_hostname(host->mmc), clock); ++ host->overclock = clock; ++ } ++ } else if (host->overclock) { ++ host->overclock = 0; ++ if (clock == 50 * MHZ) ++ pr_warn("%s: cancelling overclock\n", ++ mmc_hostname(host->mmc)); ++ } ++ } else if (input_clock == 0) { ++ /* Reset the preferred overclock when the clock is stopped. ++ * This always happens during initialisation. */ ++ host->overclock_50 = host->user_overclock_50; ++ host->overclock = 0; ++ } ++ ++ /* Set the timeout to 500ms */ ++ bcm2835_sdhost_write(host, clock/2, SDTOUT); ++ ++ host->mmc->actual_clock = clock; ++ host->clock = input_clock; ++ host->reset_clock = 0; ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ u32 edm, fsm; ++ ++ host = mmc_priv(mmc); ++ ++ if (host->debug) { ++ struct mmc_command *cmd = mrq->cmd; ++ BUG_ON(!cmd); ++ if (cmd->data) ++ pr_info("%s: cmd %d 0x%x (flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_info("%s: cmd %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags); ++ } ++ ++ /* Reset the error statuses in case this is a retry */ ++ if (mrq->sbc) ++ mrq->sbc->error = 0; ++ if (mrq->cmd) ++ mrq->cmd->error = 0; ++ if (mrq->data) ++ mrq->data->error = 0; ++ if (mrq->stop) ++ mrq->stop->error = 0; ++ ++ if (mrq->data && !is_power_of_2(mrq->data->blksz)) { ++ pr_err("%s: unsupported block size (%d bytes)\n", ++ mmc_hostname(mmc), mrq->data->blksz); ++ mrq->cmd->error = -EINVAL; ++ mmc_request_done(mmc, mrq); ++ return; ++ } ++ ++ if (host->use_dma && mrq->data && ++ (mrq->data->blocks > host->pio_limit)) ++ bcm2835_sdhost_prepare_dma(host, mrq->data); ++ ++ if (host->reset_clock) ++ bcm2835_sdhost_set_clock(host, host->clock); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ WARN_ON(host->mrq != NULL); ++ host->mrq = mrq; ++ ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ fsm = edm & SDEDM_FSM_MASK; ++ ++ log_event("REQ<", (u32)mrq, edm); ++ if ((fsm != SDEDM_FSM_IDENTMODE) && ++ (fsm != SDEDM_FSM_DATAMODE)) { ++ log_event("REQ!", (u32)mrq, edm); ++ if (host->debug) { ++ pr_warn("%s: previous command (%d) not complete (EDM %x)\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK, ++ edm); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ mrq->cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ host->use_sbc = !!mrq->sbc && ++ (host->mrq->data->flags & USE_CMD23_FLAGS); ++ if (host->use_sbc) { ++ if (bcm2835_sdhost_send_command(host, mrq->sbc)) { ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, &flags); ++ } ++ } else if (bcm2835_sdhost_send_command(host, mrq->cmd)) { ++ if (host->data && host->dma_desc) ++ /* DMA transfer starts now, PIO starts after irq */ ++ bcm2835_sdhost_start_dma(host); ++ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, &flags); ++ } ++ ++ log_event("CMD ", (u32)mrq->cmd->opcode, ++ mrq->data ? (u32)mrq->data->blksz : 0); ++ mmiowb(); ++ ++ log_event("REQ>", (u32)mrq, 0); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ ++ if (host->debug) ++ pr_info("%s: ios clock %d, pwr %d, bus_width %d, " ++ "timing %d, vdd %d, drv_type %d\n", ++ mmc_hostname(mmc), ++ ios->clock, ios->power_mode, ios->bus_width, ++ ios->timing, ios->signal_voltage, ios->drv_type); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("IOS<", ios->clock, 0); ++ ++ /* set bus width */ ++ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS; ++ if (ios->bus_width == MMC_BUS_WIDTH_4) ++ host->hcfg |= SDHCFG_WIDE_EXT_BUS; ++ ++ host->hcfg |= SDHCFG_WIDE_INT_BUS; ++ ++ /* Disable clever clock switching, to cope with fast core clocks */ ++ host->hcfg |= SDHCFG_SLOW_CARD; ++ ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (!ios->clock || ios->clock != host->clock) ++ bcm2835_sdhost_set_clock(host, ios->clock); ++} ++ ++static struct mmc_host_ops bcm2835_sdhost_ops = { ++ .request = bcm2835_sdhost_request, ++ .set_ios = bcm2835_sdhost_set_ios, ++ .hw_reset = bcm2835_sdhost_reset, ++}; ++ ++static void bcm2835_sdhost_cmd_wait_work(struct work_struct *work) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = container_of(work, struct bcm2835_host, cmd_wait_wq); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("CWK<", (u32)host->cmd, (u32)host->mrq); ++ ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ bcm2835_sdhost_finish_command(host, &flags); ++ ++ mmiowb(); ++ ++ log_event("CWK>", (u32)host->cmd, 0); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_tasklet_finish(unsigned long param) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ struct mmc_request *mrq; ++ struct dma_chan *terminate_chan = NULL; ++ ++ host = (struct bcm2835_host *)param; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("TSK<", (u32)host->mrq, 0); ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ del_timer(&host->timer); ++ ++ mrq = host->mrq; ++ ++ /* Drop the overclock after any data corruption, or after any ++ * error while overclocked. Ignore errors for status commands, ++ * as they are likely when a card is ejected. */ ++ if (host->overclock) { ++ if ((mrq->cmd && mrq->cmd->error && ++ (mrq->cmd->opcode != MMC_SEND_STATUS)) || ++ (mrq->data && mrq->data->error) || ++ (mrq->stop && mrq->stop->error) || ++ (mrq->sbc && mrq->sbc->error)) { ++ host->overclock_50--; ++ pr_warn("%s: reducing overclock due to errors\n", ++ mmc_hostname(host->mmc)); ++ host->reset_clock = 1; ++ mrq->cmd->error = -ETIMEDOUT; ++ mrq->cmd->retries = 1; ++ } ++ } ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmiowb(); ++ ++ host->dma_desc = NULL; ++ terminate_chan = host->dma_chan; ++ host->dma_chan = NULL; ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (terminate_chan) ++ { ++ int err = dmaengine_terminate_all(terminate_chan); ++ if (err) ++ pr_err("%s: failed to terminate DMA (%d)\n", ++ mmc_hostname(host->mmc), err); ++ } ++ ++ /* The SDHOST block doesn't report any errors for a disconnected ++ interface. All cards and SDIO devices should report some supported ++ voltage range, so a zero response to SEND_OP_COND, IO_SEND_OP_COND ++ or APP_SEND_OP_COND can be treated as an error. */ ++ if (((mrq->cmd->opcode == MMC_SEND_OP_COND) || ++ (mrq->cmd->opcode == SD_IO_SEND_OP_COND) || ++ (mrq->cmd->opcode == SD_APP_OP_COND)) && ++ (mrq->cmd->error == 0) && ++ (mrq->cmd->resp[0] == 0)) { ++ mrq->cmd->error = -ETIMEDOUT; ++ if (host->debug) ++ pr_info("%s: faking timeout due to zero OCR\n", ++ mmc_hostname(host->mmc)); ++ } ++ ++ mmc_request_done(host->mmc, mrq); ++ log_event("TSK>", (u32)mrq, 0); ++} ++ ++int bcm2835_sdhost_add_host(struct bcm2835_host *host) ++{ ++ struct mmc_host *mmc; ++ struct dma_slave_config cfg; ++ char pio_limit_string[20]; ++ int ret; ++ ++ mmc = host->mmc; ++ ++ mmc->f_max = host->max_clk; ++ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; ++ ++ mmc->max_busy_timeout = (~(unsigned int)0)/(mmc->f_max/1000); ++ ++ pr_debug("f_max %d, f_min %d, max_busy_timeout %d\n", ++ mmc->f_max, mmc->f_min, mmc->max_busy_timeout); ++ ++ /* host controller capabilities */ ++ mmc->caps |= ++ MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE | ++ ((ALLOW_CMD23_READ|ALLOW_CMD23_WRITE) * MMC_CAP_CMD23); ++ ++ spin_lock_init(&host->lock); ++ ++ if (host->allow_dma) { ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ pr_err("%s: unable to initialise DMA channel. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); ++ host->use_dma = false; ++ } else { ++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.slave_id = 13; /* DREQ channel */ ++ ++ /* Validate the slave configurations */ ++ ++ cfg.direction = DMA_MEM_TO_DEV; ++ cfg.src_addr = 0; ++ cfg.dst_addr = host->bus_addr + SDDATA; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDDATA; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } ++ } ++ } else { ++ host->use_dma = false; ++ } ++ ++ mmc->max_segs = 128; ++ mmc->max_req_size = 524288; ++ mmc->max_seg_size = mmc->max_req_size; ++ mmc->max_blk_size = 512; ++ mmc->max_blk_count = 65535; ++ ++ /* report supported voltage ranges */ ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ tasklet_init(&host->finish_tasklet, ++ bcm2835_sdhost_tasklet_finish, (unsigned long)host); ++ ++ INIT_WORK(&host->cmd_wait_wq, bcm2835_sdhost_cmd_wait_work); ++ ++ setup_timer(&host->timer, bcm2835_sdhost_timeout, ++ (unsigned long)host); ++ ++ bcm2835_sdhost_init(host, 0); ++ ++ ret = request_irq(host->irq, bcm2835_sdhost_irq, 0 /*IRQF_SHARED*/, ++ mmc_hostname(mmc), host); ++ if (ret) { ++ pr_err("%s: failed to request IRQ %d: %d\n", ++ mmc_hostname(mmc), host->irq, ret); ++ goto untasklet; ++ } ++ ++ mmiowb(); ++ mmc_add_host(mmc); ++ ++ pio_limit_string[0] = '\0'; ++ if (host->use_dma && (host->pio_limit > 0)) ++ sprintf(pio_limit_string, " (>%d)", host->pio_limit); ++ pr_info("%s: %s loaded - DMA %s%s\n", ++ mmc_hostname(mmc), DRIVER_NAME, ++ host->use_dma ? "enabled" : "disabled", ++ pio_limit_string); ++ ++ return 0; ++ ++untasklet: ++ tasklet_kill(&host->finish_tasklet); ++ ++ return ret; ++} ++ ++static int bcm2835_sdhost_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct clk *clk; ++ struct resource *iomem; ++ struct bcm2835_host *host; ++ struct mmc_host *mmc; ++ const __be32 *addr; ++ u32 msg[3]; ++ int ret; ++ ++ pr_debug("bcm2835_sdhost_probe\n"); ++ mmc = mmc_alloc_host(sizeof(*host), dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ mmc->ops = &bcm2835_sdhost_ops; ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ host->pio_timeout = msecs_to_jiffies(500); ++ host->pio_limit = 1; ++ host->max_delay = 1; /* Warn if over 1ms */ ++ host->allow_dma = 1; ++ spin_lock_init(&host->lock); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ host->ioaddr = devm_ioremap_resource(dev, iomem); ++ if (IS_ERR(host->ioaddr)) { ++ ret = PTR_ERR(host->ioaddr); ++ goto err; ++ } ++ ++ addr = of_get_address(node, 0, NULL, NULL); ++ if (!addr) { ++ dev_err(dev, "could not get DMA-register address\n"); ++ return -ENODEV; ++ } ++ host->bus_addr = be32_to_cpup(addr); ++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", ++ (unsigned long)host->ioaddr, ++ (unsigned long)iomem->start, ++ (unsigned long)host->bus_addr); ++ ++ if (node) { ++ /* Read any custom properties */ ++ of_property_read_u32(node, ++ "brcm,delay-after-stop", ++ &host->delay_after_stop); ++ of_property_read_u32(node, ++ "brcm,overclock-50", ++ &host->user_overclock_50); ++ of_property_read_u32(node, ++ "brcm,pio-limit", ++ &host->pio_limit); ++ host->allow_dma = ++ !of_property_read_bool(node, "brcm,force-pio"); ++ host->debug = of_property_read_bool(node, "brcm,debug"); ++ } ++ ++ host->dma_chan = NULL; ++ host->dma_desc = NULL; ++ ++ /* Formally recognise the other way of disabling DMA */ ++ if (host->pio_limit == 0x7fffffff) ++ host->allow_dma = false; ++ ++ if (host->allow_dma) { ++ if (node) { ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); ++ } else { ++ dma_cap_mask_t mask; ++ ++ dma_cap_zero(mask); ++ /* we don't care about the channel, any would work */ ++ dma_cap_set(DMA_SLAVE, mask); ++ host->dma_chan_rxtx = ++ dma_request_channel(mask, NULL, NULL); ++ } ++ } ++ ++ clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(clk)) { ++ ret = PTR_ERR(clk); ++ if (ret == -EPROBE_DEFER) ++ dev_info(dev, "could not get clk, deferring probe\n"); ++ else ++ dev_err(dev, "could not get clk\n"); ++ goto err; ++ } ++ ++ host->max_clk = clk_get_rate(clk); ++ ++ host->irq = platform_get_irq(pdev, 0); ++ if (host->irq <= 0) { ++ dev_err(dev, "get IRQ failed\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ pr_debug(" - max_clk %lx, irq %d\n", ++ (unsigned long)host->max_clk, ++ (int)host->irq); ++ ++ log_init(dev, iomem->start - host->bus_addr); ++ ++ if (node) ++ mmc_of_parse(mmc); ++ else ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ ++ msg[0] = 0; ++ msg[1] = ~0; ++ msg[2] = ~0; ++ ++ rpi_firmware_property(rpi_firmware_get(NULL), ++ RPI_FIRMWARE_SET_SDHOST_CLOCK, ++ &msg, sizeof(msg)); ++ ++ host->firmware_sets_cdiv = (msg[1] != ~0); ++ ++ ret = bcm2835_sdhost_add_host(host); ++ if (ret) ++ goto err; ++ ++ platform_set_drvdata(pdev, host); ++ ++ pr_debug("bcm2835_sdhost_probe -> OK\n"); ++ ++ return 0; ++ ++err: ++ pr_debug("bcm2835_sdhost_probe -> err %d\n", ret); ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++static int bcm2835_sdhost_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_host *host = platform_get_drvdata(pdev); ++ ++ pr_debug("bcm2835_sdhost_remove\n"); ++ ++ mmc_remove_host(host->mmc); ++ ++ bcm2835_sdhost_set_power(host, false); ++ ++ free_irq(host->irq, host); ++ ++ del_timer_sync(&host->timer); ++ ++ tasklet_kill(&host->finish_tasklet); ++ ++ mmc_free_host(host->mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ pr_debug("bcm2835_sdhost_remove - OK\n"); ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_sdhost_match[] = { ++ { .compatible = "brcm,bcm2835-sdhost" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_sdhost_match); ++ ++static struct platform_driver bcm2835_sdhost_driver = { ++ .probe = bcm2835_sdhost_probe, ++ .remove = bcm2835_sdhost_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_sdhost_match, ++ }, ++}; ++module_platform_driver(bcm2835_sdhost_driver); ++ ++MODULE_ALIAS("platform:sdhost-bcm2835"); ++MODULE_DESCRIPTION("BCM2835 SDHost driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Phil Elwell"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1035_50836003e0469fd36137428bcf8e0e8dfce20d27.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1035_50836003e0469fd36137428bcf8e0e8dfce20d27.patch --- linux-4.9.13/debian/patches/rpi/rpi_1035_50836003e0469fd36137428bcf8e0e8dfce20d27.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1035_50836003e0469fd36137428bcf8e0e8dfce20d27.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,134 @@ +commit 50836003e0469fd36137428bcf8e0e8dfce20d27 +Author: Phil Elwell +Date: Wed May 11 12:50:33 2016 +0100 + + mmc: Add MMC_QUIRK_ERASE_BROKEN for some cards + + Some SD cards have been found that corrupt data when small blocks + are erased. Add a quirk to indicate that ERASE should not be used, + and set it for cards of that type. + + Signed-off-by: Phil Elwell + + mmc: Apply QUIRK_BROKEN_ERASE to other capacities + + Signed-off-by: Phil Elwell + + mmc: Add card_quirks module parameter, log quirks + + Use mmc_block.card_quirks to override the quirks for all SD or MMC + cards. The value is a bitfield using the bit positions defined in + include/linux/mmc/card.h. If the module parameter is placed in the + kernel command line (or bootargs) stored on the card then, assuming the + device only has one SD card interface, the override effectively becomes + card-specific. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index 709a872ed484..894c105be9ce 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -135,6 +135,13 @@ enum { + module_param(perdev_minors, int, 0444); + MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); + ++/* ++ * Allow quirks to be overridden for the current card ++ */ ++static char *card_quirks; ++module_param(card_quirks, charp, 0644); ++MODULE_PARM_DESC(card_quirks, "Force the use of the indicated quirks (a bitfield)"); ++ + static inline int mmc_blk_part_switch(struct mmc_card *card, + struct mmc_blk_data *md); + static int get_card_status(struct mmc_card *card, u32 *status, int retries); +@@ -2573,6 +2580,17 @@ static const struct mmc_fixup blk_fixups[] = + MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + ++ /* ++ * On some Kingston SD cards, multiple erases of less than 64 ++ * sectors can cause corruption. ++ */ ++ MMC_FIXUP("SD16G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ MMC_FIXUP("SD32G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ MMC_FIXUP("SD64G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ + END_FIXUP + }; + +@@ -2580,6 +2598,7 @@ static int mmc_blk_probe(struct mmc_card *card) + { + struct mmc_blk_data *md, *part_md; + char cap_str[10]; ++ char quirk_str[24]; + + /* + * Check that the card supports the command class(es) we need. +@@ -2587,7 +2606,16 @@ static int mmc_blk_probe(struct mmc_card *card) + if (!(card->csd.cmdclass & CCC_BLOCK_READ)) + return -ENODEV; + +- mmc_fixup_device(card, blk_fixups); ++ if (card_quirks) { ++ unsigned long quirks; ++ if (kstrtoul(card_quirks, 0, &quirks) == 0) ++ card->quirks = (unsigned int)quirks; ++ else ++ pr_err("mmc_block: Invalid card_quirks parameter '%s'\n", ++ card_quirks); ++ } ++ else ++ mmc_fixup_device(card, blk_fixups); + + md = mmc_blk_alloc(card); + if (IS_ERR(md)) +@@ -2595,9 +2623,14 @@ static int mmc_blk_probe(struct mmc_card *card) + + string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, + cap_str, sizeof(cap_str)); +- pr_info("%s: %s %s %s %s\n", ++ if (card->quirks) ++ snprintf(quirk_str, sizeof(quirk_str), ++ " (quirks 0x%08x)", card->quirks); ++ else ++ quirk_str[0] = '\0'; ++ pr_info("%s: %s %s %s%s%s\n", + md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), +- cap_str, md->read_only ? "(ro)" : ""); ++ cap_str, md->read_only ? " (ro)" : "", quirk_str); + + if (mmc_blk_alloc_parts(card, md)) + goto out; +diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c +index 2553d903a82b..59a4044ea4c2 100644 +--- a/drivers/mmc/core/core.c ++++ b/drivers/mmc/core/core.c +@@ -2409,7 +2409,8 @@ EXPORT_SYMBOL(mmc_erase); + int mmc_can_erase(struct mmc_card *card) + { + if ((card->host->caps & MMC_CAP_ERASE) && +- (card->csd.cmdclass & CCC_ERASE) && card->erase_size) ++ (card->csd.cmdclass & CCC_ERASE) && card->erase_size && ++ !(card->quirks & MMC_QUIRK_ERASE_BROKEN)) + return 1; + return 0; + } +diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h +index 73fad83acbcb..e7c9d3098ac0 100644 +--- a/include/linux/mmc/card.h ++++ b/include/linux/mmc/card.h +@@ -283,6 +283,9 @@ struct mmc_card { + #define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ + + ++#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */ ++ ++ + unsigned int erase_size; /* erase size in sectors */ + unsigned int erase_shift; /* if erase unit is power 2 */ + unsigned int pref_erase; /* in sectors */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1036_9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1036_9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8.patch --- linux-4.9.13/debian/patches/rpi/rpi_1036_9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1036_9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,1322 @@ +commit 9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8 +Author: popcornmix +Date: Wed Jul 3 00:31:47 2013 +0100 + + cma: Add vc_cma driver to enable use of CMA + + Signed-off-by: popcornmix + + vc_cma: Make the vc_cma area the default contiguous DMA area + + vc_cma: Provide empty functions when module is not built + + Providing empty functions saves the users from guarding the + function call with an #if clause. + Move __init markings from prototypes to functions. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig +index dcc09739a54e..6d518c7635ae 100644 +--- a/drivers/char/Kconfig ++++ b/drivers/char/Kconfig +@@ -4,6 +4,8 @@ + + menu "Character devices" + ++source "drivers/char/broadcom/Kconfig" ++ + source "drivers/tty/Kconfig" + + config DEVMEM +diff --git a/drivers/char/Makefile b/drivers/char/Makefile +index 6e6c244a66a0..67c40b8f2ff2 100644 +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -60,3 +60,4 @@ js-rtc-y = rtc.o + obj-$(CONFIG_TILE_SROM) += tile-srom.o + obj-$(CONFIG_XILLYBUS) += xillybus/ + obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o ++obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/ +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +new file mode 100644 +index 000000000000..2d8bd6e5016a +--- /dev/null ++++ b/drivers/char/broadcom/Kconfig +@@ -0,0 +1,15 @@ ++# ++# Broadcom char driver config ++# ++ ++menuconfig BRCM_CHAR_DRIVERS ++ bool "Broadcom Char Drivers" ++ help ++ Broadcom's char drivers ++ ++config BCM_VC_CMA ++ bool "Videocore CMA" ++ depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ ++ default n ++ help ++ Helper for videocore CMA access. +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +new file mode 100644 +index 000000000000..13c5bca291cc +--- /dev/null ++++ b/drivers/char/broadcom/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ +diff --git a/drivers/char/broadcom/vc_cma/Makefile b/drivers/char/broadcom/vc_cma/Makefile +new file mode 100644 +index 000000000000..d222313e2899 +--- /dev/null ++++ b/drivers/char/broadcom/vc_cma/Makefile +@@ -0,0 +1,7 @@ ++ccflags-$(CONFIG_BCM_VC_CMA) += -Wall -Wstrict-prototypes -Wno-trigraphs -Werror ++ccflags-$(CONFIG_BCM_VC_CMA) += -Iinclude/linux/broadcom -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vchi -Idrivers/staging/vc04_services/interface/vchiq_arm ++ccflags-$(CONFIG_BCM_VC_CMA) += -D__KERNEL__ -D__linux__ ++ ++obj-$(CONFIG_BCM_VC_CMA) += vc-cma.o ++ ++vc-cma-objs := vc_cma.o +diff --git a/drivers/char/broadcom/vc_cma/vc_cma.c b/drivers/char/broadcom/vc_cma/vc_cma.c +new file mode 100644 +index 000000000000..85f6e9da9e5b +--- /dev/null ++++ b/drivers/char/broadcom/vc_cma/vc_cma.c +@@ -0,0 +1,1193 @@ ++/** ++ * Copyright (c) 2010-2012 Broadcom. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_cma.h" ++ ++#include "vchiq_util.h" ++#include "vchiq_connected.h" ++//#include "debug_sym.h" ++//#include "vc_mem.h" ++ ++#define DRIVER_NAME "vc-cma" ++ ++#define LOG_DBG(fmt, ...) \ ++ if (vc_cma_debug) \ ++ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) ++#define LOG_INFO(fmt, ...) \ ++ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) ++#define LOG_ERR(fmt, ...) \ ++ printk(KERN_ERR fmt "\n", ##__VA_ARGS__) ++ ++#define VC_CMA_FOURCC VCHIQ_MAKE_FOURCC('C', 'M', 'A', ' ') ++#define VC_CMA_VERSION 2 ++ ++#define VC_CMA_CHUNK_ORDER 6 /* 256K */ ++#define VC_CMA_CHUNK_SIZE (4096 << VC_CMA_CHUNK_ORDER) ++#define VC_CMA_MAX_PARAMS_PER_MSG \ ++ ((VCHIQ_MAX_MSG_SIZE - sizeof(unsigned short))/sizeof(unsigned short)) ++#define VC_CMA_RESERVE_COUNT_MAX 16 ++ ++#define PAGES_PER_CHUNK (VC_CMA_CHUNK_SIZE / PAGE_SIZE) ++ ++#define VCADDR_TO_PHYSADDR(vcaddr) (mm_vc_mem_phys_addr + vcaddr) ++ ++#define loud_error(...) \ ++ LOG_ERR("===== " __VA_ARGS__) ++ ++enum { ++ VC_CMA_MSG_QUIT, ++ VC_CMA_MSG_OPEN, ++ VC_CMA_MSG_TICK, ++ VC_CMA_MSG_ALLOC, /* chunk count */ ++ VC_CMA_MSG_FREE, /* chunk, chunk, ... */ ++ VC_CMA_MSG_ALLOCATED, /* chunk, chunk, ... */ ++ VC_CMA_MSG_REQUEST_ALLOC, /* chunk count */ ++ VC_CMA_MSG_REQUEST_FREE, /* chunk count */ ++ VC_CMA_MSG_RESERVE, /* bytes lo, bytes hi */ ++ VC_CMA_MSG_UPDATE_RESERVE, ++ VC_CMA_MSG_MAX ++}; ++ ++struct cma_msg { ++ unsigned short type; ++ unsigned short params[VC_CMA_MAX_PARAMS_PER_MSG]; ++}; ++ ++struct vc_cma_reserve_user { ++ unsigned int pid; ++ unsigned int reserve; ++}; ++ ++/* Device (/dev) related variables */ ++static dev_t vc_cma_devnum; ++static struct class *vc_cma_class; ++static struct cdev vc_cma_cdev; ++static int vc_cma_inited; ++static int vc_cma_debug; ++ ++/* Proc entry */ ++static struct proc_dir_entry *vc_cma_proc_entry; ++ ++phys_addr_t vc_cma_base; ++struct page *vc_cma_base_page; ++unsigned int vc_cma_size; ++EXPORT_SYMBOL(vc_cma_size); ++unsigned int vc_cma_initial; ++unsigned int vc_cma_chunks; ++unsigned int vc_cma_chunks_used; ++unsigned int vc_cma_chunks_reserved; ++ ++ ++void *vc_cma_dma_alloc; ++unsigned int vc_cma_dma_size; ++ ++static int in_loud_error; ++ ++unsigned int vc_cma_reserve_total; ++unsigned int vc_cma_reserve_count; ++struct vc_cma_reserve_user vc_cma_reserve_users[VC_CMA_RESERVE_COUNT_MAX]; ++static DEFINE_SEMAPHORE(vc_cma_reserve_mutex); ++static DEFINE_SEMAPHORE(vc_cma_worker_queue_push_mutex); ++ ++static u64 vc_cma_dma_mask = DMA_BIT_MASK(32); ++static struct platform_device vc_cma_device = { ++ .name = "vc-cma", ++ .id = 0, ++ .dev = { ++ .dma_mask = &vc_cma_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; ++ ++static VCHIQ_INSTANCE_T cma_instance; ++static VCHIQ_SERVICE_HANDLE_T cma_service; ++static VCHIU_QUEUE_T cma_msg_queue; ++static struct task_struct *cma_worker; ++ ++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid); ++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply); ++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T * header, ++ VCHIQ_SERVICE_HANDLE_T service, ++ void *bulk_userdata); ++static void send_vc_msg(unsigned short type, ++ unsigned short param1, unsigned short param2); ++static bool send_worker_msg(VCHIQ_HEADER_T * msg); ++ ++static int early_vc_cma_mem(char *p) ++{ ++ unsigned int new_size; ++ printk(KERN_NOTICE "early_vc_cma_mem(%s)", p); ++ vc_cma_size = memparse(p, &p); ++ vc_cma_initial = vc_cma_size; ++ if (*p == '/') ++ vc_cma_size = memparse(p + 1, &p); ++ if (*p == '@') ++ vc_cma_base = memparse(p + 1, &p); ++ ++ new_size = (vc_cma_size - ((-vc_cma_base) & (VC_CMA_CHUNK_SIZE - 1))) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ if (new_size > vc_cma_size) ++ vc_cma_size = 0; ++ vc_cma_initial = (vc_cma_initial + VC_CMA_CHUNK_SIZE - 1) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ if (vc_cma_initial > vc_cma_size) ++ vc_cma_initial = vc_cma_size; ++ vc_cma_base = (vc_cma_base + VC_CMA_CHUNK_SIZE - 1) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ ++ printk(KERN_NOTICE " -> initial %x, size %x, base %x", vc_cma_initial, ++ vc_cma_size, (unsigned int)vc_cma_base); ++ ++ return 0; ++} ++ ++early_param("vc-cma-mem", early_vc_cma_mem); ++ ++void __init vc_cma_early_init(void) ++{ ++ LOG_DBG("vc_cma_early_init - vc_cma_chunks = %d", vc_cma_chunks); ++ if (vc_cma_size) { ++ int rc = platform_device_register(&vc_cma_device); ++ LOG_DBG("platform_device_register -> %d", rc); ++ } ++} ++ ++void __init vc_cma_reserve(void) ++{ ++ /* if vc_cma_size is set, then declare vc CMA area of the same ++ * size from the end of memory ++ */ ++ if (vc_cma_size) { ++ if (dma_declare_contiguous(&vc_cma_device.dev, vc_cma_size, ++ vc_cma_base, 0) == 0) { ++ if (!dev_get_cma_area(NULL)) { ++ /* There is no default CMA area - make this ++ the default */ ++ struct cma *vc_cma_area = dev_get_cma_area( ++ &vc_cma_device.dev); ++ dma_contiguous_set_default(vc_cma_area); ++ LOG_INFO("vc_cma_reserve - using vc_cma as " ++ "the default contiguous DMA area"); ++ } ++ } else { ++ LOG_ERR("vc_cma: dma_declare_contiguous(%x,%x) failed", ++ vc_cma_size, (unsigned int)vc_cma_base); ++ vc_cma_size = 0; ++ } ++ } ++ vc_cma_chunks = vc_cma_size / VC_CMA_CHUNK_SIZE; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_open ++* ++***************************************************************************/ ++ ++static int vc_cma_open(struct inode *inode, struct file *file) ++{ ++ (void)inode; ++ (void)file; ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_release ++* ++***************************************************************************/ ++ ++static int vc_cma_release(struct inode *inode, struct file *file) ++{ ++ (void)inode; ++ (void)file; ++ ++ vc_cma_set_reserve(0, current->tgid); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_ioctl ++* ++***************************************************************************/ ++ ++static long vc_cma_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ (void)cmd; ++ (void)arg; ++ ++ switch (cmd) { ++ case VC_CMA_IOC_RESERVE: ++ rc = vc_cma_set_reserve((unsigned int)arg, current->tgid); ++ if (rc >= 0) ++ rc = 0; ++ break; ++ default: ++ LOG_ERR("vc-cma: Unknown ioctl %x", cmd); ++ return -ENOTTY; ++ } ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for the driver. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_cma_fops = { ++ .owner = THIS_MODULE, ++ .open = vc_cma_open, ++ .release = vc_cma_release, ++ .unlocked_ioctl = vc_cma_ioctl, ++}; ++ ++/**************************************************************************** ++* ++* vc_cma_proc_open ++* ++***************************************************************************/ ++ ++static int vc_cma_show_info(struct seq_file *m, void *v) ++{ ++ int i; ++ ++ seq_printf(m, "Videocore CMA:\n"); ++ seq_printf(m, " Base : %08x\n", (unsigned int)vc_cma_base); ++ seq_printf(m, " Length : %08x\n", vc_cma_size); ++ seq_printf(m, " Initial : %08x\n", vc_cma_initial); ++ seq_printf(m, " Chunk size : %08x\n", VC_CMA_CHUNK_SIZE); ++ seq_printf(m, " Chunks : %4d (%d bytes)\n", ++ (int)vc_cma_chunks, ++ (int)(vc_cma_chunks * VC_CMA_CHUNK_SIZE)); ++ seq_printf(m, " Used : %4d (%d bytes)\n", ++ (int)vc_cma_chunks_used, ++ (int)(vc_cma_chunks_used * VC_CMA_CHUNK_SIZE)); ++ seq_printf(m, " Reserved : %4d (%d bytes)\n", ++ (unsigned int)vc_cma_chunks_reserved, ++ (int)(vc_cma_chunks_reserved * VC_CMA_CHUNK_SIZE)); ++ ++ for (i = 0; i < vc_cma_reserve_count; i++) { ++ struct vc_cma_reserve_user *user = &vc_cma_reserve_users[i]; ++ seq_printf(m, " PID %5d: %d bytes\n", user->pid, ++ user->reserve); ++ } ++ seq_printf(m, " dma_alloc : %p (%d pages)\n", ++ vc_cma_dma_alloc ? page_address(vc_cma_dma_alloc) : 0, ++ vc_cma_dma_size); ++ ++ seq_printf(m, "\n"); ++ ++ return 0; ++} ++ ++static int vc_cma_proc_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vc_cma_show_info, NULL); ++} ++ ++/**************************************************************************** ++* ++* vc_cma_proc_write ++* ++***************************************************************************/ ++ ++static int vc_cma_proc_write(struct file *file, ++ const char __user *buffer, ++ size_t size, loff_t *ppos) ++{ ++ int rc = -EFAULT; ++ char input_str[20]; ++ ++ memset(input_str, 0, sizeof(input_str)); ++ ++ if (size > sizeof(input_str)) { ++ LOG_ERR("%s: input string length too long", __func__); ++ goto out; ++ } ++ ++ if (copy_from_user(input_str, buffer, size - 1)) { ++ LOG_ERR("%s: failed to get input string", __func__); ++ goto out; ++ } ++#define ALLOC_STR "alloc" ++#define FREE_STR "free" ++#define DEBUG_STR "debug" ++#define RESERVE_STR "reserve" ++#define DMA_ALLOC_STR "dma_alloc" ++#define DMA_FREE_STR "dma_free" ++ if (strncmp(input_str, ALLOC_STR, strlen(ALLOC_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(ALLOC_STR); ++ ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ LOG_INFO("/proc/vc-cma: alloc %d", alloc_size); ++ if (alloc_size) ++ send_vc_msg(VC_CMA_MSG_REQUEST_FREE, ++ alloc_size / VC_CMA_CHUNK_SIZE, 0); ++ else ++ LOG_ERR("invalid size '%s'", p); ++ rc = size; ++ } else if (strncmp(input_str, FREE_STR, strlen(FREE_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(FREE_STR); ++ ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ LOG_INFO("/proc/vc-cma: free %d", alloc_size); ++ if (alloc_size) ++ send_vc_msg(VC_CMA_MSG_REQUEST_ALLOC, ++ alloc_size / VC_CMA_CHUNK_SIZE, 0); ++ else ++ LOG_ERR("invalid size '%s'", p); ++ rc = size; ++ } else if (strncmp(input_str, DEBUG_STR, strlen(DEBUG_STR)) == 0) { ++ char *p = input_str + strlen(DEBUG_STR); ++ while (*p == ' ') ++ p++; ++ if ((strcmp(p, "on") == 0) || (strcmp(p, "1") == 0)) ++ vc_cma_debug = 1; ++ else if ((strcmp(p, "off") == 0) || (strcmp(p, "0") == 0)) ++ vc_cma_debug = 0; ++ LOG_INFO("/proc/vc-cma: debug %s", vc_cma_debug ? "on" : "off"); ++ rc = size; ++ } else if (strncmp(input_str, RESERVE_STR, strlen(RESERVE_STR)) == 0) { ++ int alloc_size; ++ int reserved; ++ char *p = input_str + strlen(RESERVE_STR); ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ ++ reserved = vc_cma_set_reserve(alloc_size, current->tgid); ++ rc = (reserved >= 0) ? size : reserved; ++ } else if (strncmp(input_str, DMA_ALLOC_STR, strlen(DMA_ALLOC_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(DMA_ALLOC_STR); ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ ++ if (vc_cma_dma_alloc) { ++ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, ++ vc_cma_dma_size); ++ vc_cma_dma_alloc = NULL; ++ vc_cma_dma_size = 0; ++ } ++ vc_cma_dma_alloc = dma_alloc_from_contiguous(NULL, alloc_size, 0); ++ vc_cma_dma_size = (vc_cma_dma_alloc ? alloc_size : 0); ++ if (vc_cma_dma_alloc) ++ LOG_INFO("dma_alloc(%d pages) -> %p", alloc_size, page_address(vc_cma_dma_alloc)); ++ else ++ LOG_ERR("dma_alloc(%d pages) failed", alloc_size); ++ rc = size; ++ } else if (strncmp(input_str, DMA_FREE_STR, strlen(DMA_FREE_STR)) == 0) { ++ if (vc_cma_dma_alloc) { ++ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, ++ vc_cma_dma_size); ++ vc_cma_dma_alloc = NULL; ++ vc_cma_dma_size = 0; ++ } ++ rc = size; ++ } ++ ++out: ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for /proc interface. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_cma_proc_fops = { ++ .open = vc_cma_proc_open, ++ .read = seq_read, ++ .write = vc_cma_proc_write, ++ .llseek = seq_lseek, ++ .release = single_release ++}; ++ ++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid) ++{ ++ struct vc_cma_reserve_user *user = NULL; ++ int delta = 0; ++ int i; ++ ++ if (down_interruptible(&vc_cma_reserve_mutex)) ++ return -ERESTARTSYS; ++ ++ for (i = 0; i < vc_cma_reserve_count; i++) { ++ if (pid == vc_cma_reserve_users[i].pid) { ++ user = &vc_cma_reserve_users[i]; ++ delta = reserve - user->reserve; ++ if (reserve) ++ user->reserve = reserve; ++ else { ++ /* Remove this entry by copying downwards */ ++ while ((i + 1) < vc_cma_reserve_count) { ++ user[0].pid = user[1].pid; ++ user[0].reserve = user[1].reserve; ++ user++; ++ i++; ++ } ++ vc_cma_reserve_count--; ++ user = NULL; ++ } ++ break; ++ } ++ } ++ ++ if (reserve && !user) { ++ if (vc_cma_reserve_count == VC_CMA_RESERVE_COUNT_MAX) { ++ LOG_ERR("vc-cma: Too many reservations - " ++ "increase CMA_RESERVE_COUNT_MAX"); ++ up(&vc_cma_reserve_mutex); ++ return -EBUSY; ++ } ++ user = &vc_cma_reserve_users[vc_cma_reserve_count]; ++ user->pid = pid; ++ user->reserve = reserve; ++ delta = reserve; ++ vc_cma_reserve_count++; ++ } ++ ++ vc_cma_reserve_total += delta; ++ ++ send_vc_msg(VC_CMA_MSG_RESERVE, ++ vc_cma_reserve_total & 0xffff, vc_cma_reserve_total >> 16); ++ ++ send_worker_msg((VCHIQ_HEADER_T *) VC_CMA_MSG_UPDATE_RESERVE); ++ ++ LOG_DBG("/proc/vc-cma: reserve %d (PID %d) - total %u", ++ reserve, pid, vc_cma_reserve_total); ++ ++ up(&vc_cma_reserve_mutex); ++ ++ return vc_cma_reserve_total; ++} ++ ++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T * header, ++ VCHIQ_SERVICE_HANDLE_T service, ++ void *bulk_userdata) ++{ ++ switch (reason) { ++ case VCHIQ_MESSAGE_AVAILABLE: ++ if (!send_worker_msg(header)) ++ return VCHIQ_RETRY; ++ break; ++ case VCHIQ_SERVICE_CLOSED: ++ LOG_DBG("CMA service closed"); ++ break; ++ default: ++ LOG_ERR("Unexpected CMA callback reason %d", reason); ++ break; ++ } ++ return VCHIQ_SUCCESS; ++} ++ ++static void send_vc_msg(unsigned short type, ++ unsigned short param1, unsigned short param2) ++{ ++ unsigned short msg[] = { type, param1, param2 }; ++ VCHIQ_ELEMENT_T elem = { &msg, sizeof(msg) }; ++ VCHIQ_STATUS_T ret; ++ vchiq_use_service(cma_service); ++ ret = vchiq_queue_message(cma_service, &elem, 1); ++ vchiq_release_service(cma_service); ++ if (ret != VCHIQ_SUCCESS) ++ LOG_ERR("vchiq_queue_message returned %x", ret); ++} ++ ++static bool send_worker_msg(VCHIQ_HEADER_T * msg) ++{ ++ if (down_interruptible(&vc_cma_worker_queue_push_mutex)) ++ return false; ++ vchiu_queue_push(&cma_msg_queue, msg); ++ up(&vc_cma_worker_queue_push_mutex); ++ return true; ++} ++ ++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply) ++{ ++ int i; ++ for (i = 0; i < num_chunks; i++) { ++ struct page *chunk; ++ unsigned int chunk_num; ++ uint8_t *chunk_addr; ++ size_t chunk_size = PAGES_PER_CHUNK << PAGE_SHIFT; ++ ++ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, ++ PAGES_PER_CHUNK, ++ VC_CMA_CHUNK_ORDER); ++ if (!chunk) ++ break; ++ ++ chunk_addr = page_address(chunk); ++ dmac_flush_range(chunk_addr, chunk_addr + chunk_size); ++ outer_inv_range(__pa(chunk_addr), __pa(chunk_addr) + ++ chunk_size); ++ ++ chunk_num = ++ (page_to_phys(chunk) - vc_cma_base) / VC_CMA_CHUNK_SIZE; ++ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % ++ VC_CMA_CHUNK_SIZE) != 0); ++ if (chunk_num >= vc_cma_chunks) { ++ phys_addr_t _pa = vc_cma_base + vc_cma_size - 1; ++ LOG_ERR("%s: ===============================", ++ __func__); ++ LOG_ERR("%s: chunk phys %x, vc_cma %pa-%pa - " ++ "bad SPARSEMEM configuration?", ++ __func__, (unsigned int)page_to_phys(chunk), ++ &vc_cma_base, &_pa); ++ LOG_ERR("%s: dev->cma_area = %p", __func__, ++ (void*)0/*vc_cma_device.dev.cma_area*/); ++ LOG_ERR("%s: ===============================", ++ __func__); ++ break; ++ } ++ reply->params[i] = chunk_num; ++ vc_cma_chunks_used++; ++ } ++ ++ if (i < num_chunks) { ++ LOG_ERR("%s: dma_alloc_from_contiguous failed " ++ "for %x bytes (alloc %d of %d, %d free)", ++ __func__, VC_CMA_CHUNK_SIZE, i, ++ num_chunks, vc_cma_chunks - vc_cma_chunks_used); ++ num_chunks = i; ++ } ++ ++ LOG_DBG("CMA allocated %d chunks -> %d used", ++ num_chunks, vc_cma_chunks_used); ++ reply->type = VC_CMA_MSG_ALLOCATED; ++ ++ { ++ VCHIQ_ELEMENT_T elem = { ++ reply, ++ offsetof(struct cma_msg, params[0]) + ++ num_chunks * sizeof(reply->params[0]) ++ }; ++ VCHIQ_STATUS_T ret; ++ vchiq_use_service(cma_service); ++ ret = vchiq_queue_message(cma_service, &elem, 1); ++ vchiq_release_service(cma_service); ++ if (ret != VCHIQ_SUCCESS) ++ LOG_ERR("vchiq_queue_message return " "%x", ret); ++ } ++ ++ return num_chunks; ++} ++ ++static int cma_worker_proc(void *param) ++{ ++ static struct cma_msg reply; ++ (void)param; ++ ++ while (1) { ++ VCHIQ_HEADER_T *msg; ++ static struct cma_msg msg_copy; ++ struct cma_msg *cma_msg = &msg_copy; ++ int type, msg_size; ++ ++ msg = vchiu_queue_pop(&cma_msg_queue); ++ if ((unsigned int)msg >= VC_CMA_MSG_MAX) { ++ msg_size = msg->size; ++ memcpy(&msg_copy, msg->data, msg_size); ++ type = cma_msg->type; ++ vchiq_release_message(cma_service, msg); ++ } else { ++ msg_size = 0; ++ type = (int)msg; ++ if (type == VC_CMA_MSG_QUIT) ++ break; ++ else if (type == VC_CMA_MSG_UPDATE_RESERVE) { ++ msg = NULL; ++ cma_msg = NULL; ++ } else { ++ BUG(); ++ continue; ++ } ++ } ++ ++ switch (type) { ++ case VC_CMA_MSG_ALLOC:{ ++ int num_chunks, free_chunks; ++ num_chunks = cma_msg->params[0]; ++ free_chunks = ++ vc_cma_chunks - vc_cma_chunks_used; ++ LOG_DBG("CMA_MSG_ALLOC(%d chunks)", num_chunks); ++ if (num_chunks > VC_CMA_MAX_PARAMS_PER_MSG) { ++ LOG_ERR ++ ("CMA_MSG_ALLOC - chunk count (%d) " ++ "exceeds VC_CMA_MAX_PARAMS_PER_MSG (%d)", ++ num_chunks, ++ VC_CMA_MAX_PARAMS_PER_MSG); ++ num_chunks = VC_CMA_MAX_PARAMS_PER_MSG; ++ } ++ ++ if (num_chunks > free_chunks) { ++ LOG_ERR ++ ("CMA_MSG_ALLOC - chunk count (%d) " ++ "exceeds free chunks (%d)", ++ num_chunks, free_chunks); ++ num_chunks = free_chunks; ++ } ++ ++ vc_cma_alloc_chunks(num_chunks, &reply); ++ } ++ break; ++ ++ case VC_CMA_MSG_FREE:{ ++ int chunk_count = ++ (msg_size - ++ offsetof(struct cma_msg, ++ params)) / ++ sizeof(cma_msg->params[0]); ++ int i; ++ BUG_ON(chunk_count <= 0); ++ ++ LOG_DBG("CMA_MSG_FREE(%d chunks - %x, ...)", ++ chunk_count, cma_msg->params[0]); ++ for (i = 0; i < chunk_count; i++) { ++ int chunk_num = cma_msg->params[i]; ++ struct page *page = vc_cma_base_page + ++ chunk_num * PAGES_PER_CHUNK; ++ if (chunk_num >= vc_cma_chunks) { ++ LOG_ERR ++ ("CMA_MSG_FREE - chunk %d of %d" ++ " (value %x) exceeds maximum " ++ "(%x)", i, chunk_count, ++ chunk_num, ++ vc_cma_chunks - 1); ++ break; ++ } ++ ++ if (!dma_release_from_contiguous ++ (&vc_cma_device.dev, page, ++ PAGES_PER_CHUNK)) { ++ phys_addr_t _pa = page_to_phys(page); ++ LOG_ERR ++ ("CMA_MSG_FREE - failed to " ++ "release chunk %d (phys %pa, " ++ "page %x)", chunk_num, ++ &_pa, ++ (unsigned int)page); ++ } ++ vc_cma_chunks_used--; ++ } ++ LOG_DBG("CMA released %d chunks -> %d used", ++ i, vc_cma_chunks_used); ++ } ++ break; ++ ++ case VC_CMA_MSG_UPDATE_RESERVE:{ ++ int chunks_needed = ++ ((vc_cma_reserve_total + VC_CMA_CHUNK_SIZE - ++ 1) ++ / VC_CMA_CHUNK_SIZE) - ++ vc_cma_chunks_reserved; ++ ++ LOG_DBG ++ ("CMA_MSG_UPDATE_RESERVE(%d chunks needed)", ++ chunks_needed); ++ ++ /* Cap the reservations to what is available */ ++ if (chunks_needed > 0) { ++ if (chunks_needed > ++ (vc_cma_chunks - ++ vc_cma_chunks_used)) ++ chunks_needed = ++ (vc_cma_chunks - ++ vc_cma_chunks_used); ++ ++ chunks_needed = ++ vc_cma_alloc_chunks(chunks_needed, ++ &reply); ++ } ++ ++ LOG_DBG ++ ("CMA_MSG_UPDATE_RESERVE(%d chunks allocated)", ++ chunks_needed); ++ vc_cma_chunks_reserved += chunks_needed; ++ } ++ break; ++ ++ default: ++ LOG_ERR("unexpected msg type %d", type); ++ break; ++ } ++ } ++ ++ LOG_DBG("quitting..."); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_connected_init ++* ++* This function is called once the videocore has been connected. ++* ++***************************************************************************/ ++ ++static void vc_cma_connected_init(void) ++{ ++ VCHIQ_SERVICE_PARAMS_T service_params; ++ ++ LOG_DBG("vc_cma_connected_init"); ++ ++ if (!vchiu_queue_init(&cma_msg_queue, 16)) { ++ LOG_ERR("could not create CMA msg queue"); ++ goto fail_queue; ++ } ++ ++ if (vchiq_initialise(&cma_instance) != VCHIQ_SUCCESS) ++ goto fail_vchiq_init; ++ ++ vchiq_connect(cma_instance); ++ ++ service_params.fourcc = VC_CMA_FOURCC; ++ service_params.callback = cma_service_callback; ++ service_params.userdata = NULL; ++ service_params.version = VC_CMA_VERSION; ++ service_params.version_min = VC_CMA_VERSION; ++ ++ if (vchiq_open_service(cma_instance, &service_params, ++ &cma_service) != VCHIQ_SUCCESS) { ++ LOG_ERR("failed to open service - already in use?"); ++ goto fail_vchiq_open; ++ } ++ ++ vchiq_release_service(cma_service); ++ ++ cma_worker = kthread_create(cma_worker_proc, NULL, "cma_worker"); ++ if (!cma_worker) { ++ LOG_ERR("could not create CMA worker thread"); ++ goto fail_worker; ++ } ++ set_user_nice(cma_worker, -20); ++ wake_up_process(cma_worker); ++ ++ return; ++ ++fail_worker: ++ vchiq_close_service(cma_service); ++fail_vchiq_open: ++ vchiq_shutdown(cma_instance); ++fail_vchiq_init: ++ vchiu_queue_delete(&cma_msg_queue); ++fail_queue: ++ return; ++} ++ ++void ++loud_error_header(void) ++{ ++ if (in_loud_error) ++ return; ++ ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("====="); ++ ++ in_loud_error = 1; ++} ++ ++void ++loud_error_footer(void) ++{ ++ if (!in_loud_error) ++ return; ++ ++ LOG_ERR("====="); ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("============================================================" ++ "================"); ++ ++ in_loud_error = 0; ++} ++ ++#if 1 ++static int check_cma_config(void) { return 1; } ++#else ++static int ++read_vc_debug_var(VC_MEM_ACCESS_HANDLE_T handle, ++ const char *symbol, ++ void *buf, size_t bufsize) ++{ ++ VC_MEM_ADDR_T vcMemAddr; ++ size_t vcMemSize; ++ uint8_t *mapAddr; ++ off_t vcMapAddr; ++ ++ if (!LookupVideoCoreSymbol(handle, symbol, ++ &vcMemAddr, ++ &vcMemSize)) { ++ loud_error_header(); ++ loud_error( ++ "failed to find VC symbol \"%s\".", ++ symbol); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ if (vcMemSize != bufsize) { ++ loud_error_header(); ++ loud_error( ++ "VC symbol \"%s\" is the wrong size.", ++ symbol); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ vcMapAddr = (off_t)vcMemAddr & VC_MEM_TO_ARM_ADDR_MASK; ++ vcMapAddr += mm_vc_mem_phys_addr; ++ mapAddr = ioremap_nocache(vcMapAddr, vcMemSize); ++ if (mapAddr == 0) { ++ loud_error_header(); ++ loud_error( ++ "failed to ioremap \"%s\" @ 0x%x " ++ "(phys: 0x%x, size: %u).", ++ symbol, ++ (unsigned int)vcMapAddr, ++ (unsigned int)vcMemAddr, ++ (unsigned int)vcMemSize); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ memcpy(buf, mapAddr, bufsize); ++ iounmap(mapAddr); ++ ++ return 1; ++} ++ ++ ++static int ++check_cma_config(void) ++{ ++ VC_MEM_ACCESS_HANDLE_T mem_hndl; ++ VC_MEM_ADDR_T mempool_start; ++ VC_MEM_ADDR_T mempool_end; ++ VC_MEM_ADDR_T mempool_offline_start; ++ VC_MEM_ADDR_T mempool_offline_end; ++ VC_MEM_ADDR_T cam_alloc_base; ++ VC_MEM_ADDR_T cam_alloc_size; ++ VC_MEM_ADDR_T cam_alloc_end; ++ int success = 0; ++ ++ if (OpenVideoCoreMemory(&mem_hndl) != 0) ++ goto out; ++ ++ /* Read the relevant VideoCore variables */ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_START", ++ &mempool_start, ++ sizeof(mempool_start))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_END", ++ &mempool_end, ++ sizeof(mempool_end))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_START", ++ &mempool_offline_start, ++ sizeof(mempool_offline_start))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_END", ++ &mempool_offline_end, ++ sizeof(mempool_offline_end))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "cam_alloc_base", ++ &cam_alloc_base, ++ sizeof(cam_alloc_base))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "cam_alloc_size", ++ &cam_alloc_size, ++ sizeof(cam_alloc_size))) ++ goto close; ++ ++ cam_alloc_end = cam_alloc_base + cam_alloc_size; ++ ++ success = 1; ++ ++ /* Now the sanity checks */ ++ if (!mempool_offline_start) ++ mempool_offline_start = mempool_start; ++ if (!mempool_offline_end) ++ mempool_offline_end = mempool_end; ++ ++ if (VCADDR_TO_PHYSADDR(mempool_offline_start) != vc_cma_base) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_START(%x -> %lx) doesn't match " ++ "vc_cma_base(%x)", ++ mempool_offline_start, ++ VCADDR_TO_PHYSADDR(mempool_offline_start), ++ vc_cma_base); ++ success = 0; ++ } ++ ++ if (VCADDR_TO_PHYSADDR(mempool_offline_end) != ++ (vc_cma_base + vc_cma_size)) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x -> %lx) doesn't match " ++ "vc_cma_base(%x) + vc_cma_size(%x) = %x", ++ mempool_offline_start, ++ VCADDR_TO_PHYSADDR(mempool_offline_end), ++ vc_cma_base, vc_cma_size, vc_cma_base + vc_cma_size); ++ success = 0; ++ } ++ ++ if (mempool_end < mempool_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_END(%x) must not be before " ++ "__MEMPOOL_START(%x)", ++ mempool_end, ++ mempool_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_end < mempool_offline_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x) must not be before " ++ "__MEMPOOL_OFFLINE_START(%x)", ++ mempool_offline_end, ++ mempool_offline_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_start < mempool_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_START(%x) must not be before " ++ "__MEMPOOL_START(%x)", ++ mempool_offline_start, ++ mempool_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_end > mempool_end) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x) must not be after " ++ "__MEMPOOL_END(%x)", ++ mempool_offline_end, ++ mempool_end); ++ success = 0; ++ } ++ ++ if ((cam_alloc_base < mempool_end) && ++ (cam_alloc_end > mempool_start)) { ++ loud_error_header(); ++ loud_error( ++ "cam_alloc pool(%x-%x) overlaps " ++ "mempool(%x-%x)", ++ cam_alloc_base, cam_alloc_end, ++ mempool_start, mempool_end); ++ success = 0; ++ } ++ ++ loud_error_footer(); ++ ++close: ++ CloseVideoCoreMemory(mem_hndl); ++ ++out: ++ return success; ++} ++#endif ++ ++static int vc_cma_init(void) ++{ ++ int rc = -EFAULT; ++ struct device *dev; ++ ++ if (!check_cma_config()) ++ goto out_release; ++ ++ LOG_INFO("vc-cma: Videocore CMA driver"); ++ LOG_INFO("vc-cma: vc_cma_base = %pa", &vc_cma_base); ++ LOG_INFO("vc-cma: vc_cma_size = 0x%08x (%u MiB)", ++ vc_cma_size, vc_cma_size / (1024 * 1024)); ++ LOG_INFO("vc-cma: vc_cma_initial = 0x%08x (%u MiB)", ++ vc_cma_initial, vc_cma_initial / (1024 * 1024)); ++ ++ vc_cma_base_page = phys_to_page(vc_cma_base); ++ ++ if (vc_cma_chunks) { ++ int chunks_needed = vc_cma_initial / VC_CMA_CHUNK_SIZE; ++ ++ for (vc_cma_chunks_used = 0; ++ vc_cma_chunks_used < chunks_needed; vc_cma_chunks_used++) { ++ struct page *chunk; ++ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, ++ PAGES_PER_CHUNK, ++ VC_CMA_CHUNK_ORDER); ++ if (!chunk) ++ break; ++ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % ++ VC_CMA_CHUNK_SIZE) != 0); ++ } ++ if (vc_cma_chunks_used != chunks_needed) { ++ LOG_ERR("%s: dma_alloc_from_contiguous failed (%d " ++ "bytes, allocation %d of %d)", ++ __func__, VC_CMA_CHUNK_SIZE, ++ vc_cma_chunks_used, chunks_needed); ++ goto out_release; ++ } ++ ++ vchiq_add_connected_callback(vc_cma_connected_init); ++ } ++ ++ rc = alloc_chrdev_region(&vc_cma_devnum, 0, 1, DRIVER_NAME); ++ if (rc < 0) { ++ LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc); ++ goto out_release; ++ } ++ ++ cdev_init(&vc_cma_cdev, &vc_cma_fops); ++ rc = cdev_add(&vc_cma_cdev, vc_cma_devnum, 1); ++ if (rc != 0) { ++ LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc); ++ goto out_unregister; ++ } ++ ++ vc_cma_class = class_create(THIS_MODULE, DRIVER_NAME); ++ if (IS_ERR(vc_cma_class)) { ++ rc = PTR_ERR(vc_cma_class); ++ LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc); ++ goto out_cdev_del; ++ } ++ ++ dev = device_create(vc_cma_class, NULL, vc_cma_devnum, NULL, ++ DRIVER_NAME); ++ if (IS_ERR(dev)) { ++ rc = PTR_ERR(dev); ++ LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc); ++ goto out_class_destroy; ++ } ++ ++ vc_cma_proc_entry = proc_create(DRIVER_NAME, 0444, NULL, &vc_cma_proc_fops); ++ if (vc_cma_proc_entry == NULL) { ++ rc = -EFAULT; ++ LOG_ERR("%s: proc_create failed", __func__); ++ goto out_device_destroy; ++ } ++ ++ vc_cma_inited = 1; ++ return 0; ++ ++out_device_destroy: ++ device_destroy(vc_cma_class, vc_cma_devnum); ++ ++out_class_destroy: ++ class_destroy(vc_cma_class); ++ vc_cma_class = NULL; ++ ++out_cdev_del: ++ cdev_del(&vc_cma_cdev); ++ ++out_unregister: ++ unregister_chrdev_region(vc_cma_devnum, 1); ++ ++out_release: ++ /* It is tempting to try to clean up by calling ++ dma_release_from_contiguous for all allocated chunks, but it isn't ++ a very safe thing to do. If vc_cma_initial is non-zero it is because ++ VideoCore is already using that memory, so giving it back to Linux ++ is likely to be fatal. ++ */ ++ return -1; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_exit ++* ++***************************************************************************/ ++ ++static void __exit vc_cma_exit(void) ++{ ++ LOG_DBG("%s: called", __func__); ++ ++ if (vc_cma_inited) { ++ remove_proc_entry(DRIVER_NAME, NULL); ++ device_destroy(vc_cma_class, vc_cma_devnum); ++ class_destroy(vc_cma_class); ++ cdev_del(&vc_cma_cdev); ++ unregister_chrdev_region(vc_cma_devnum, 1); ++ } ++} ++ ++module_init(vc_cma_init); ++module_exit(vc_cma_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); +diff --git a/include/linux/broadcom/vc_cma.h b/include/linux/broadcom/vc_cma.h +new file mode 100644 +index 000000000000..be2819d5d41f +--- /dev/null ++++ b/include/linux/broadcom/vc_cma.h +@@ -0,0 +1,36 @@ ++/***************************************************************************** ++* Copyright 2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#if !defined( VC_CMA_H ) ++#define VC_CMA_H ++ ++#include ++ ++#define VC_CMA_IOC_MAGIC 0xc5 ++ ++#define VC_CMA_IOC_RESERVE _IO(VC_CMA_IOC_MAGIC, 0) ++ ++#ifdef __KERNEL__ ++ ++#ifdef CONFIG_BCM_VC_CMA ++void vc_cma_early_init(void); ++void vc_cma_reserve(void); ++#else ++static inline void vc_cma_early_init(void) { } ++static inline void vc_cma_reserve(void) { } ++#endif ++ ++#endif ++ ++#endif /* VC_CMA_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1037_704131d69bcf80115170b1e1df941c38d65a5633.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1037_704131d69bcf80115170b1e1df941c38d65a5633.patch --- linux-4.9.13/debian/patches/rpi/rpi_1037_704131d69bcf80115170b1e1df941c38d65a5633.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1037_704131d69bcf80115170b1e1df941c38d65a5633.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,2719 @@ +commit 704131d69bcf80115170b1e1df941c38d65a5633 +Author: popcornmix +Date: Mon Mar 26 22:15:50 2012 +0100 + + bcm2708: alsa sound driver + + Signed-off-by: popcornmix + + alsa: add mmap support and some cleanups to bcm2835 ALSA driver + + snd-bcm2835: Add support for spdif/hdmi passthrough + + This adds a dedicated subdevice which can be used for passthrough of non-audio + formats (ie encoded a52) through the hdmi audio link. In addition to this + driver extension an appropriate card config is required to make alsa-lib + support the AES parameters for this device. + + snd-bcm2708: Add mutex, improve logging + + Fix for ALSA driver crash + + Avoids an issue when closing and opening vchiq where a message can arrive before service handle has been written + + alsa: reduce severity of expected warning message + + snd-bcm2708: Fix dmesg spam for non-error case + + alsa: Ensure mutexes are released through error paths + + alsa: Make interrupted close paths quieter + + BCM270x: Add onboard sound device to Device Tree + + Add Device Tree support to alsa driver. + Add device to Device Tree. + Don't add platform devices when booting in DT mode. + + Signed-off-by: Noralf Trønnes + + bcm2835: access controls under the audio mutex + + I don't think the ALSA framework provides any kind of automatic + synchronization within the control callbacks. We most likely need + to ensure this manually, so add locking around all access to shared + mutable data. In particular, bcm2835_audio_set_ctls() should + probably always be called under our own audio lock. + + snd-bcm2835: Don't allow responses from VC to be interrupted by user signals + + There should always be a response, and retry after a signal interruption is not handled, so don't report + we are interruptible. + + See: https://github.com/raspberrypi/linux/issues/1560 + + snd-bcm2835: Use bcm2835_hw params in preallocate + +diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig +index 65171f6657a2..02b6d263035c 100644 +--- a/sound/arm/Kconfig ++++ b/sound/arm/Kconfig +@@ -32,6 +32,13 @@ config SND_PXA2XX_AC97 + Say Y or M if you want to support any AC97 codec attached to + the PXA2xx AC97 interface. + ++config SND_BCM2835 ++ tristate "BCM2835 ALSA driver" ++ depends on ARCH_BCM2835 && BCM2708_VCHIQ && SND ++ select SND_PCM ++ help ++ Say Y or M if you want to support BCM2835 Alsa pcm card driver ++ + endif # SND_ARM + + config SND_PXA2XX_LIB +diff --git a/sound/arm/Makefile b/sound/arm/Makefile +index 8c0c851d4641..26aabea79a0b 100644 +--- a/sound/arm/Makefile ++++ b/sound/arm/Makefile +@@ -14,3 +14,8 @@ snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_AC97) += pxa2xx-ac97-lib.o + + obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o + snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++ ++obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o ++snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o ++ ++ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 +diff --git a/sound/arm/bcm2835-ctl.c b/sound/arm/bcm2835-ctl.c +new file mode 100755 +index 000000000000..75dc3224be7c +--- /dev/null ++++ b/sound/arm/bcm2835-ctl.c +@@ -0,0 +1,350 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* volume maximum and minimum in terms of 0.01dB */ ++#define CTRL_VOL_MAX 400 ++#define CTRL_VOL_MIN -10239 /* originally -10240 */ ++ ++ ++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ audio_info(" ... IN\n"); ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = CTRL_VOL_MIN; ++ uinfo->value.integer.max = CTRL_VOL_MAX; /* 2303 */ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = AUDIO_DEST_MAX-1; ++ } ++ audio_info(" ... OUT\n"); ++ return 0; ++} ++ ++/* toggles mute on or off depending on the value of nmute, and returns ++ * 1 if the mute value was changed, otherwise 0 ++ */ ++static int toggle_mute(struct bcm2835_chip *chip, int nmute) ++{ ++ /* if settings are ok, just return 0 */ ++ if(chip->mute == nmute) ++ return 0; ++ ++ /* if the sound is muted then we need to unmute */ ++ if(chip->mute == CTRL_VOL_MUTE) ++ { ++ chip->volume = chip->old_volume; /* copy the old volume back */ ++ audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); ++ } ++ else /* otherwise we mute */ ++ { ++ chip->old_volume = chip->volume; ++ chip->volume = 26214; /* set volume to minimum level AKA mute */ ++ audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); ++ } ++ ++ chip->mute = nmute; ++ return 1; ++} ++ ++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) ++ ucontrol->value.integer.value[0] = chip2alsa(chip->volume); ++ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) ++ ucontrol->value.integer.value[0] = chip->mute; ++ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) ++ ucontrol->value.integer.value[0] = chip->dest; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int changed = 0; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); ++ if (chip->mute == CTRL_VOL_MUTE) { ++ /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */ ++ changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */ ++ goto unlock; ++ } ++ if (changed ++ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { ++ ++ chip->volume = alsa2chip(ucontrol->value.integer.value[0]); ++ changed = 1; ++ } ++ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ /* Now implemented */ ++ audio_info(" Mute attempted\n"); ++ changed = toggle_mute(chip, ucontrol->value.integer.value[0]); ++ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ if (ucontrol->value.integer.value[0] != chip->dest) { ++ chip->dest = ucontrol->value.integer.value[0]; ++ changed = 1; ++ } ++ } ++ ++ if (changed) { ++ if (bcm2835_audio_set_ctls(chip)) ++ printk(KERN_ERR "Failed to set ALSA controls..\n"); ++ } ++ ++unlock: ++ mutex_unlock(&chip->audio_mutex); ++ return changed; ++} ++ ++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1); ++ ++static struct snd_kcontrol_new snd_bcm2835_ctl[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, ++ .private_value = PCM_PLAYBACK_VOLUME, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ .tlv = {.p = snd_bcm2835_db_scale} ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_MUTE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Route", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_DEVICE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++}; ++ ++static int snd_bcm2835_spdif_default_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_default_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int i; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = ++ (chip->spdif_status >> (i * 8)) && 0xff; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_default_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ unsigned int val = 0; ++ int i, change; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); ++ ++ change = val != chip->spdif_status; ++ chip->spdif_status = val; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return change; ++} ++ ++static int snd_bcm2835_spdif_mask_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_mask_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ /* bcm2835 supports only consumer mode and sets all other format flags ++ * automatically. So the only thing left is signalling non-audio ++ * content */ ++ ucontrol->value.iec958.status[0] = IEC958_AES0_NONAUDIO; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int i; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = ++ (chip->spdif_status >> (i * 8)) & 0xff; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ unsigned int val = 0; ++ int i, change; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); ++ change = val != chip->spdif_status; ++ chip->spdif_status = val; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return change; ++} ++ ++static struct snd_kcontrol_new snd_bcm2835_spdif[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), ++ .info = snd_bcm2835_spdif_default_info, ++ .get = snd_bcm2835_spdif_default_get, ++ .put = snd_bcm2835_spdif_default_put ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), ++ .info = snd_bcm2835_spdif_mask_info, ++ .get = snd_bcm2835_spdif_mask_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | ++ SNDRV_CTL_ELEM_ACCESS_INACTIVE, ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), ++ .info = snd_bcm2835_spdif_stream_info, ++ .get = snd_bcm2835_spdif_stream_get, ++ .put = snd_bcm2835_spdif_stream_put, ++ }, ++}; ++ ++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip) ++{ ++ int err; ++ unsigned int idx; ++ ++ strcpy(chip->card->mixername, "Broadcom Mixer"); ++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { ++ err = ++ snd_ctl_add(chip->card, ++ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); ++ if (err < 0) ++ return err; ++ } ++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) { ++ err = snd_ctl_add(chip->card, ++ snd_ctl_new1(&snd_bcm2835_spdif[idx], chip)); ++ if (err < 0) ++ return err; ++ } ++ return 0; ++} +diff --git a/sound/arm/bcm2835-pcm.c b/sound/arm/bcm2835-pcm.c +new file mode 100755 +index 000000000000..71b128924aff +--- /dev/null ++++ b/sound/arm/bcm2835-pcm.c +@@ -0,0 +1,563 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++ ++#include ++ ++#include "bcm2835.h" ++ ++/* hardware definition */ ++static struct snd_pcm_hardware snd_bcm2835_playback_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, ++ .buffer_bytes_max = 128 * 1024, ++ .period_bytes_min = 1 * 1024, ++ .period_bytes_max = 128 * 1024, ++ .periods_min = 1, ++ .periods_max = 128, ++}; ++ ++static struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000, ++ .rate_min = 44100, ++ .rate_max = 48000, ++ .channels_min = 2, ++ .channels_max = 2, ++ .buffer_bytes_max = 128 * 1024, ++ .period_bytes_min = 1 * 1024, ++ .period_bytes_max = 128 * 1024, ++ .periods_min = 1, ++ .periods_max = 128, ++}; ++ ++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) ++{ ++ audio_info("Freeing up alsa stream here ..\n"); ++ if (runtime->private_data) ++ kfree(runtime->private_data); ++ runtime->private_data = NULL; ++} ++ ++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id) ++{ ++ bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id; ++ uint32_t consumed = 0; ++ int new_period = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_info("alsa_stream=%p substream=%p\n", alsa_stream, ++ alsa_stream ? alsa_stream->substream : 0); ++ ++ if (alsa_stream->open) ++ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); ++ ++ /* We get called only if playback was triggered, So, the number of buffers we retrieve in ++ * each iteration are the buffers that have been played out already ++ */ ++ ++ if (alsa_stream->period_size) { ++ if ((alsa_stream->pos / alsa_stream->period_size) != ++ ((alsa_stream->pos + consumed) / alsa_stream->period_size)) ++ new_period = 1; ++ } ++ audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n", ++ alsa_stream->pos, ++ consumed, ++ alsa_stream->buffer_size, ++ (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods), ++ frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr), ++ new_period); ++ if (alsa_stream->buffer_size) { ++ alsa_stream->pos += consumed &~ (1<<30); ++ alsa_stream->pos %= alsa_stream->buffer_size; ++ } ++ ++ if (alsa_stream->substream) { ++ if (new_period) ++ snd_pcm_period_elapsed(alsa_stream->substream); ++ } else { ++ audio_warning(" unexpected NULL substream\n"); ++ } ++ audio_info(" .. OUT\n"); ++ ++ return IRQ_HANDLED; ++} ++ ++/* open callback */ ++static int snd_bcm2835_playback_open_generic( ++ struct snd_pcm_substream *substream, int spdif) ++{ ++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int idx; ++ int err; ++ ++ audio_info(" .. IN (%d)\n", substream->number); ++ ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ audio_info("Alsa open (%d)\n", substream->number); ++ idx = substream->number; ++ ++ if (spdif && chip->opened != 0) { ++ err = -EBUSY; ++ goto out; ++ } ++ else if (!spdif && (chip->opened & (1 << idx))) { ++ err = -EBUSY; ++ goto out; ++ } ++ if (idx > MAX_SUBSTREAMS) { ++ audio_error ++ ("substream(%d) device doesn't exist max(%d) substreams allowed\n", ++ idx, MAX_SUBSTREAMS); ++ err = -ENODEV; ++ goto out; ++ } ++ ++ /* Check if we are ready */ ++ if (!(chip->avail_substreams & (1 << idx))) { ++ /* We are not ready yet */ ++ audio_error("substream(%d) device is not ready yet\n", idx); ++ err = -EAGAIN; ++ goto out; ++ } ++ ++ alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL); ++ if (alsa_stream == NULL) { ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ /* Initialise alsa_stream */ ++ alsa_stream->chip = chip; ++ alsa_stream->substream = substream; ++ alsa_stream->idx = idx; ++ ++ sema_init(&alsa_stream->buffers_update_sem, 0); ++ sema_init(&alsa_stream->control_sem, 0); ++ spin_lock_init(&alsa_stream->lock); ++ ++ /* Enabled in start trigger, called on each "fifo irq" after that */ ++ alsa_stream->enable_fifo_irq = 0; ++ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq; ++ ++ err = bcm2835_audio_open(alsa_stream); ++ if (err != 0) { ++ kfree(alsa_stream); ++ goto out; ++ } ++ runtime->private_data = alsa_stream; ++ runtime->private_free = snd_bcm2835_playback_free; ++ if (spdif) { ++ runtime->hw = snd_bcm2835_playback_spdif_hw; ++ } else { ++ /* clear spdif status, as we are not in spdif mode */ ++ chip->spdif_status = 0; ++ runtime->hw = snd_bcm2835_playback_hw; ++ } ++ /* minimum 16 bytes alignment (for vchiq bulk transfers) */ ++ snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, ++ 16); ++ ++ chip->alsa_stream[idx] = alsa_stream; ++ ++ chip->opened |= (1 << idx); ++ alsa_stream->open = 1; ++ alsa_stream->draining = 1; ++ ++out: ++ mutex_unlock(&chip->audio_mutex); ++ ++ audio_info(" .. OUT =%d\n", err); ++ ++ return err; ++} ++ ++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream) ++{ ++ return snd_bcm2835_playback_open_generic(substream, 0); ++} ++ ++static int snd_bcm2835_playback_spdif_open(struct snd_pcm_substream *substream) ++{ ++ return snd_bcm2835_playback_open_generic(substream, 1); ++} ++ ++/* close callback */ ++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) ++{ ++ /* the hardware-specific codes will be here */ ++ ++ bcm2835_chip_t *chip; ++ struct snd_pcm_runtime *runtime; ++ bcm2835_alsa_stream_t *alsa_stream; ++ ++ audio_info(" .. IN\n"); ++ ++ chip = snd_pcm_substream_chip(substream); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ runtime = substream->runtime; ++ alsa_stream = runtime->private_data; ++ ++ audio_info("Alsa close\n"); ++ ++ /* ++ * Call stop if it's still running. This happens when app ++ * is force killed and we don't get a stop trigger. ++ */ ++ if (alsa_stream->running) { ++ int err; ++ err = bcm2835_audio_stop(alsa_stream); ++ alsa_stream->running = 0; ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device\n"); ++ } ++ ++ alsa_stream->period_size = 0; ++ alsa_stream->buffer_size = 0; ++ ++ if (alsa_stream->open) { ++ alsa_stream->open = 0; ++ bcm2835_audio_close(alsa_stream); ++ } ++ if (alsa_stream->chip) ++ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; ++ /* ++ * Do not free up alsa_stream here, it will be freed up by ++ * runtime->private_free callback we registered in *_open above ++ */ ++ ++ chip->opened &= ~(1 << substream->number); ++ ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} ++ ++/* hw_params callback */ ++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ ++ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); ++ if (err < 0) { ++ audio_error ++ (" pcm_lib_malloc failed to allocated pages for buffers\n"); ++ return err; ++ } ++ ++ alsa_stream->channels = params_channels(params); ++ alsa_stream->params_rate = params_rate(params); ++ alsa_stream->pcm_format_width = snd_pcm_format_width(params_format (params)); ++ audio_info(" .. OUT\n"); ++ ++ return err; ++} ++ ++/* hw_free callback */ ++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) ++{ ++ audio_info(" .. IN\n"); ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++/* prepare callback */ ++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) ++{ ++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int channels; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ /* notify the vchiq that it should enter spdif passthrough mode by ++ * setting channels=0 (see ++ * https://github.com/raspberrypi/linux/issues/528) */ ++ if (chip->spdif_status & IEC958_AES0_NONAUDIO) ++ channels = 0; ++ else ++ channels = alsa_stream->channels; ++ ++ err = bcm2835_audio_set_params(alsa_stream, channels, ++ alsa_stream->params_rate, ++ alsa_stream->pcm_format_width); ++ if (err < 0) { ++ audio_error(" error setting hw params\n"); ++ } ++ ++ bcm2835_audio_setup(alsa_stream); ++ ++ /* in preparation of the stream, set the controls (volume level) of the stream */ ++ bcm2835_audio_set_ctls(alsa_stream->chip); ++ ++ ++ memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); ++ ++ alsa_stream->pcm_indirect.hw_buffer_size = ++ alsa_stream->pcm_indirect.sw_buffer_size = ++ snd_pcm_lib_buffer_bytes(substream); ++ ++ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); ++ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); ++ alsa_stream->pos = 0; ++ ++ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", ++ alsa_stream->buffer_size, alsa_stream->period_size, ++ alsa_stream->pos, runtime->frame_bits); ++ ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ return 0; ++} ++ ++static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, ++ struct snd_pcm_indirect *rec, size_t bytes) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ void *src = (void *)(substream->runtime->dma_area + rec->sw_data); ++ int err; ++ ++ err = bcm2835_audio_write(alsa_stream, bytes, src); ++ if (err) ++ audio_error(" Failed to transfer to alsa device (%d)\n", err); ++ ++} ++ ++static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect; ++ ++ pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max; ++ snd_pcm_indirect_playback_transfer(substream, pcm_indirect, ++ snd_bcm2835_pcm_transfer); ++ return 0; ++} ++ ++/* trigger callback */ ++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int err = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", ++ alsa_stream->running); ++ if (!alsa_stream->running) { ++ err = bcm2835_audio_start(alsa_stream); ++ if (err == 0) { ++ alsa_stream->pcm_indirect.hw_io = ++ alsa_stream->pcm_indirect.hw_data = ++ bytes_to_frames(runtime, ++ alsa_stream->pos); ++ substream->ops->ack(substream); ++ alsa_stream->running = 1; ++ alsa_stream->draining = 1; ++ } else { ++ audio_error(" Failed to START alsa device (%d)\n", err); ++ } ++ } ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ audio_debug ++ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", ++ alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING); ++ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { ++ audio_info("DRAINING\n"); ++ alsa_stream->draining = 1; ++ } else { ++ audio_info("DROPPING\n"); ++ alsa_stream->draining = 0; ++ } ++ if (alsa_stream->running) { ++ err = bcm2835_audio_stop(alsa_stream); ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device (%d)\n", err); ++ alsa_stream->running = 0; ++ } ++ break; ++ default: ++ err = -EINVAL; ++ } ++ ++ audio_info(" .. OUT\n"); ++ return err; ++} ++ ++/* pointer callback */ ++static snd_pcm_uframes_t ++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, ++ frames_to_bytes(runtime, runtime->status->hw_ptr), ++ frames_to_bytes(runtime, runtime->control->appl_ptr), ++ alsa_stream->pos); ++ ++ audio_info(" .. OUT\n"); ++ return snd_pcm_indirect_playback_pointer(substream, ++ &alsa_stream->pcm_indirect, ++ alsa_stream->pos); ++} ++ ++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, ++ unsigned int cmd, void *arg) ++{ ++ int ret = snd_pcm_lib_ioctl(substream, cmd, arg); ++ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, ++ cmd, arg, arg ? *(unsigned *)arg : 0, ret); ++ return ret; ++} ++ ++/* operators */ ++static struct snd_pcm_ops snd_bcm2835_playback_ops = { ++ .open = snd_bcm2835_playback_open, ++ .close = snd_bcm2835_playback_close, ++ .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .hw_params = snd_bcm2835_pcm_hw_params, ++ .hw_free = snd_bcm2835_pcm_hw_free, ++ .prepare = snd_bcm2835_pcm_prepare, ++ .trigger = snd_bcm2835_pcm_trigger, ++ .pointer = snd_bcm2835_pcm_pointer, ++ .ack = snd_bcm2835_pcm_ack, ++}; ++ ++static struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { ++ .open = snd_bcm2835_playback_spdif_open, ++ .close = snd_bcm2835_playback_close, ++ .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .hw_params = snd_bcm2835_pcm_hw_params, ++ .hw_free = snd_bcm2835_pcm_hw_free, ++ .prepare = snd_bcm2835_pcm_prepare, ++ .trigger = snd_bcm2835_pcm_trigger, ++ .pointer = snd_bcm2835_pcm_pointer, ++ .ack = snd_bcm2835_pcm_ack, ++}; ++ ++/* create a pcm device */ ++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ mutex_init(&chip->audio_mutex); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ err = ++ snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm); ++ if (err < 0) ++ goto out; ++ pcm->private_data = chip; ++ strcpy(pcm->name, "bcm2835 ALSA"); ++ chip->pcm = pcm; ++ chip->dest = AUDIO_DEST_AUTO; ++ chip->volume = alsa2chip(0); ++ chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ ++ /* set operators */ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &snd_bcm2835_playback_ops); ++ ++ /* pre-allocation of buffers */ ++ /* NOTE: this may fail */ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data (GFP_KERNEL), ++ snd_bcm2835_playback_hw.buffer_bytes_max, snd_bcm2835_playback_hw.buffer_bytes_max); ++ ++ ++out: ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} ++ ++int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); ++ if (err < 0) ++ goto out; ++ ++ pcm->private_data = chip; ++ strcpy(pcm->name, "bcm2835 IEC958/HDMI"); ++ chip->pcm_spdif = pcm; ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &snd_bcm2835_playback_spdif_ops); ++ ++ /* pre-allocation of buffers */ ++ /* NOTE: this may fail */ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data (GFP_KERNEL), ++ snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); ++out: ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} +diff --git a/sound/arm/bcm2835-vchiq.c b/sound/arm/bcm2835-vchiq.c +new file mode 100755 +index 000000000000..7ee436ca9fa2 +--- /dev/null ++++ b/sound/arm/bcm2835-vchiq.c +@@ -0,0 +1,889 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* ---- Include Files -------------------------------------------------------- */ ++ ++#include "interface/vchi/vchi.h" ++#include "vc_vchi_audioserv_defs.h" ++ ++/* ---- Private Constants and Types ------------------------------------------ */ ++ ++#define BCM2835_AUDIO_STOP 0 ++#define BCM2835_AUDIO_START 1 ++#define BCM2835_AUDIO_WRITE 2 ++ ++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ ++#ifdef AUDIO_DEBUG_ENABLE ++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_WARN( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_INFO( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_DBG( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++#else ++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_WARN( fmt, arg... ) ++ #define LOG_INFO( fmt, arg... ) ++ #define LOG_DBG( fmt, arg... ) ++#endif ++ ++typedef struct opaque_AUDIO_INSTANCE_T { ++ uint32_t num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ struct completion msg_avail_comp; ++ struct mutex vchi_mutex; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int32_t result; ++ short peer_version; ++} AUDIO_INSTANCE_T; ++ ++bool force_bulk = false; ++ ++/* ---- Private Variables ---------------------------------------------------- */ ++ ++/* ---- Private Function Prototypes ------------------------------------------ */ ++ ++/* ---- Private Functions ---------------------------------------------------- */ ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream); ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream); ++static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src); ++ ++typedef struct { ++ struct work_struct my_work; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int cmd; ++ void *src; ++ uint32_t count; ++} my_work_t; ++ ++static void my_wq_function(struct work_struct *work) ++{ ++ my_work_t *w = (my_work_t *) work; ++ int ret = -9; ++ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd); ++ switch (w->cmd) { ++ case BCM2835_AUDIO_START: ++ ret = bcm2835_audio_start_worker(w->alsa_stream); ++ break; ++ case BCM2835_AUDIO_STOP: ++ ret = bcm2835_audio_stop_worker(w->alsa_stream); ++ break; ++ case BCM2835_AUDIO_WRITE: ++ ret = bcm2835_audio_write_worker(w->alsa_stream, w->count, ++ w->src); ++ break; ++ default: ++ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd); ++ break; ++ } ++ kfree((void *)work); ++ LOG_DBG(" .. OUT %d\n", ret); ++} ++ ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_START; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_STOP; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_WRITE; ++ work->src = src; ++ work->count = count; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); ++ return; ++} ++ ++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ if (alsa_stream->my_wq) { ++ flush_workqueue(alsa_stream->my_wq); ++ destroy_workqueue(alsa_stream->my_wq); ++ alsa_stream->my_wq = NULL; ++ } ++ return; ++} ++ ++static void audio_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param; ++ int32_t status; ++ int32_t msg_len; ++ VC_AUDIO_MSG_T m; ++ LOG_DBG(" .. IN instance=%p, handle=%p, alsa=%p, reason=%d, handle=%p\n", ++ instance, instance ? instance->vchi_handle[0] : NULL, instance ? instance->alsa_stream : NULL, reason, msg_handle); ++ ++ if (reason != VCHI_CALLBACK_MSG_AVAILABLE) { ++ return; ++ } ++ if (!instance) { ++ LOG_ERR(" .. instance is null\n"); ++ BUG(); ++ return; ++ } ++ if (!instance->vchi_handle[0]) { ++ LOG_ERR(" .. instance->vchi_handle[0] is null\n"); ++ BUG(); ++ return; ++ } ++ status = vchi_msg_dequeue(instance->vchi_handle[0], ++ &m, sizeof m, &msg_len, VCHI_FLAGS_NONE); ++ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", ++ instance, m.u.result.success); ++ instance->result = m.u.result.success; ++ complete(&instance->msg_avail_comp); ++ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { ++ bcm2835_alsa_stream_t *alsa_stream = instance->alsa_stream; ++ irq_handler_t callback = (irq_handler_t) m.u.complete.callback; ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", ++ instance, m.u.complete.count); ++ if (alsa_stream && callback) { ++ atomic_add(m.u.complete.count, &alsa_stream->retrieved); ++ callback(0, alsa_stream); ++ } else { ++ LOG_ERR(" .. unexpected alsa_stream=%p, callback=%p\n", ++ alsa_stream, callback); ++ } ++ } else { ++ LOG_ERR(" .. unexpected m.type=%d\n", m.type); ++ } ++ LOG_DBG(" .. OUT\n"); ++} ++ ++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T ** ++ vchi_connections, ++ uint32_t num_connections) ++{ ++ uint32_t i; ++ AUDIO_INSTANCE_T *instance; ++ int status; ++ ++ LOG_DBG("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ LOG_ERR("%s: unsupported number of connections %u (max=%u)\n", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ return NULL; ++ } ++ /* Allocate memory for this instance */ ++ instance = kmalloc(sizeof(*instance), GFP_KERNEL); ++ if (!instance) ++ return NULL; ++ ++ memset(instance, 0, sizeof(*instance)); ++ instance->num_connections = num_connections; ++ ++ /* Create a lock for exclusive, serialized VCHI connection access */ ++ mutex_init(&instance->vchi_mutex); ++ /* Open the VCHI service connections */ ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), ++ VC_AUDIO_SERVER_NAME, // 4cc service code ++ vchi_connections[i], // passed in fn pointers ++ 0, // rx fifo size (unused) ++ 0, // tx fifo size (unused) ++ audio_vchi_callback, // service callback ++ instance, // service callback parameter ++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk recieves ++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk transmits ++ 0 // want crc check on bulk transfers ++ }; ++ ++ LOG_DBG("%s: about to open %i\n", __func__, i); ++ status = vchi_service_open(vchi_instance, ¶ms, ++ &instance->vchi_handle[i]); ++ LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status); ++ if (status) { ++ LOG_ERR ++ ("%s: failed to open VCHI service connection (status=%d)\n", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ /* Finished with the service for now */ ++ vchi_service_release(instance->vchi_handle[i]); ++ } ++ ++ LOG_DBG("%s: okay\n", __func__); ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]); ++ if (instance->vchi_handle[i]) ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ kfree(instance); ++ LOG_ERR("%s: error\n", __func__); ++ ++ return NULL; ++} ++ ++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance) ++{ ++ uint32_t i; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ if (instance == NULL) { ++ LOG_ERR("%s: invalid handle %p\n", __func__, instance); ++ ++ return -1; ++ } ++ ++ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ int32_t success; ++ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ if (success != 0) { ++ LOG_DBG ++ ("%s: failed to close VCHI service connection (status=%d)\n", ++ __func__, success); ++ } ++ } ++ ++ mutex_unlock(&instance->vchi_mutex); ++ ++ kfree(instance); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ static VCHI_INSTANCE_T vchi_instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ static int initted; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO("%s: start\n", __func__); ++ BUG_ON(instance); ++ if (instance) { ++ LOG_ERR("%s: VCHI instance already open (%p)\n", ++ __func__, instance); ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ret = 0; // xxx todo -1; ++ goto err_free_mem; ++ } ++ ++ /* Initialize and create a VCHI connection */ ++ if (!initted) { ++ ret = vchi_initialise(&vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ret = vchi_connect(NULL, 0, vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ initted = 1; ++ } ++ ++ /* Initialize an instance of the audio service */ ++ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1); ++ ++ if (instance == NULL) { ++ LOG_ERR("%s: failed to initialize audio service\n", __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ++ LOG_DBG(" success !\n"); ++err_free_mem: ++ LOG_DBG(" .. OUT\n"); ++ ++ return ret; ++} ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ AUDIO_INSTANCE_T *instance; ++ VC_AUDIO_MSG_T m; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_init(alsa_stream); ++ ++ ret = bcm2835_audio_open_connection(alsa_stream); ++ if (ret != 0) { ++ ret = -1; ++ goto exit; ++ } ++ instance = alsa_stream->instance; ++ LOG_DBG(" instance (%p)\n", instance); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_OPEN; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++exit: ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream, ++ bcm2835_chip_t * chip) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONTROL; ++ m.u.control.dest = chip->dest; ++ m.u.control.volume = chip->volume; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d\n", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip) ++{ ++ int i; ++ int ret = 0; ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); ++ ++ /* change ctls for all substreams */ ++ for (i = 0; i < MAX_SUBSTREAMS; i++) { ++ if (chip->avail_substreams & (1 << i)) { ++ if (!chip->alsa_stream[i]) ++ { ++ LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams); ++ ret = 0; ++ } ++ else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */ ++ (chip->alsa_stream[i], chip) != 0) ++ { ++ LOG_ERR("Couldn't set the controls for stream %d\n", i); ++ ret = -1; ++ } ++ else LOG_DBG(" Controls set for stream %d\n", i); ++ } ++ } ++ LOG_DBG(" .. OUT ret=%d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", ++ channels, samplerate, bps); ++ ++ /* resend ctls - alsa_stream may not have been open when first send */ ++ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); ++ if (ret != 0) { ++ LOG_ERR(" Alsa controls not supported\n"); ++ return -EINVAL; ++ } ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONFIG; ++ m.u.config.channels = channels; ++ m.u.config.samplerate = samplerate; ++ m.u.config.bps = bps; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_START; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_STOP; ++ m.u.stop.draining = alsa_stream->draining; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_quit(alsa_stream); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_CLOSE; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: failed result (result=%d)\n", ++ __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ /* Stop the audio service */ ++ if (instance) { ++ vc_vchi_audio_deinit(instance); ++ alsa_stream->instance = NULL; ++ } ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO(" Writing %d bytes from %p\n", count, src); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) { ++ LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); ++ } ++ m.type = VC_AUDIO_MSG_TYPE_WRITE; ++ m.u.write.count = count; ++ // old version uses bulk, new version uses control ++ m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000; ++ m.u.write.callback = alsa_stream->fifo_irq_handler; ++ m.u.write.cookie = alsa_stream; ++ m.u.write.silence = src == NULL; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ if (!m.u.write.silence) { ++ if (m.u.write.max_packet == 0) { ++ /* Send the message to the videocore */ ++ success = vchi_bulk_queue_transmit(instance->vchi_handle[0], ++ src, count, ++ 0 * ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED ++ + ++ 1 * ++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, ++ NULL); ++ } else { ++ while (count > 0) { ++ int bytes = min((int)m.u.write.max_packet, (int)count); ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ src, bytes, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ src = (char *)src + bytes; ++ count -= bytes; ++ } ++ } ++ if (success != 0) { ++ LOG_ERR ++ ("%s: failed on vchi_bulk_queue_transmit (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++/** ++ * Returns all buffers from arm->vc ++ */ ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++ return; ++} ++ ++/** ++ * Forces VC to flush(drop) its filled playback buffers and ++ * return them the us. (VC->ARM) ++ */ ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++} ++ ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ uint32_t count = atomic_read(&alsa_stream->retrieved); ++ atomic_sub(count, &alsa_stream->retrieved); ++ return count; ++} ++ ++module_param(force_bulk, bool, 0444); ++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); +diff --git a/sound/arm/bcm2835.c b/sound/arm/bcm2835.c +new file mode 100644 +index 000000000000..7a2ed78ba199 +--- /dev/null ++++ b/sound/arm/bcm2835.c +@@ -0,0 +1,511 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* module parameters (see "Module Parameters") */ ++/* SNDRV_CARDS: maximum number of cards supported by this module */ ++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 }; ++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL }; ++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 }; ++ ++/* HACKY global pointers needed for successive probes to work : ssp ++ * But compared against the changes we will have to do in VC audio_ipc code ++ * to export 8 audio_ipc devices as a single IPC device and then monitor all ++ * four devices in a thread, this gets things done quickly and should be easier ++ * to debug if we run into issues ++ */ ++ ++static struct snd_card *g_card = NULL; ++static bcm2835_chip_t *g_chip = NULL; ++ ++static int snd_bcm2835_free(bcm2835_chip_t * chip) ++{ ++ kfree(chip); ++ return 0; ++} ++ ++/* component-destructor ++ * (see "Management of Cards and Components") ++ */ ++static int snd_bcm2835_dev_free(struct snd_device *device) ++{ ++ return snd_bcm2835_free(device->device_data); ++} ++ ++/* chip-specific constructor ++ * (see "Management of Cards and Components") ++ */ ++static int snd_bcm2835_create(struct snd_card *card, ++ struct platform_device *pdev, ++ bcm2835_chip_t ** rchip) ++{ ++ bcm2835_chip_t *chip; ++ int err; ++ static struct snd_device_ops ops = { ++ .dev_free = snd_bcm2835_dev_free, ++ }; ++ ++ *rchip = NULL; ++ ++ chip = kzalloc(sizeof(*chip), GFP_KERNEL); ++ if (chip == NULL) ++ return -ENOMEM; ++ ++ chip->card = card; ++ ++ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); ++ if (err < 0) { ++ snd_bcm2835_free(chip); ++ return err; ++ } ++ ++ *rchip = chip; ++ return 0; ++} ++ ++static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ bcm2835_chip_t *chip; ++ struct snd_card *card; ++ u32 numchans; ++ int err, i; ++ ++ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", ++ &numchans); ++ if (err) { ++ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); ++ return err; ++ } ++ ++ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { ++ numchans = MAX_SUBSTREAMS; ++ dev_warn(dev, "Illegal 'brcm,pwm-channels' value, will use %u\n", ++ numchans); ++ } ++ ++ err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card); ++ if (err) { ++ dev_err(dev, "Failed to create soundcard structure\n"); ++ return err; ++ } ++ ++ snd_card_set_dev(card, dev); ++ strcpy(card->driver, "bcm2835"); ++ strcpy(card->shortname, "bcm2835 ALSA"); ++ sprintf(card->longname, "%s", card->shortname); ++ ++ err = snd_bcm2835_create(card, pdev, &chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create bcm2835 chip\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_pcm(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 pcm device\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_spdif_pcm(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 spdif pcm device\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_ctl(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 ctl\n"); ++ goto err_free; ++ } ++ ++ for (i = 0; i < numchans; i++) { ++ chip->avail_substreams |= (1 << i); ++ chip->pdev[i] = pdev; ++ } ++ ++ err = snd_card_register(card); ++ if (err) { ++ dev_err(dev, "Failed to register bcm2835 ALSA card \n"); ++ goto err_free; ++ } ++ ++ g_card = card; ++ g_chip = chip; ++ platform_set_drvdata(pdev, card); ++ audio_info("bcm2835 ALSA card created with %u channels\n", numchans); ++ ++ return 0; ++ ++err_free: ++ snd_card_free(card); ++ ++ return err; ++} ++ ++static int snd_bcm2835_alsa_probe(struct platform_device *pdev) ++{ ++ static int dev; ++ bcm2835_chip_t *chip; ++ struct snd_card *card; ++ int err; ++ ++ if (pdev->dev.of_node) ++ return snd_bcm2835_alsa_probe_dt(pdev); ++ ++ if (dev >= MAX_SUBSTREAMS) ++ return -ENODEV; ++ ++ if (!enable[dev]) { ++ dev++; ++ return -ENOENT; ++ } ++ ++ if (dev > 0) ++ goto add_register_map; ++ ++ err = snd_card_new(&pdev->dev, index[dev], id[dev], THIS_MODULE, 0, &g_card); ++ if (err < 0) ++ goto out; ++ ++ snd_card_set_dev(g_card, &pdev->dev); ++ strcpy(g_card->driver, "bcm2835"); ++ strcpy(g_card->shortname, "bcm2835 ALSA"); ++ sprintf(g_card->longname, "%s", g_card->shortname); ++ ++ err = snd_bcm2835_create(g_card, pdev, &chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create bcm2835 chip\n"); ++ goto out_bcm2835_create; ++ } ++ ++ g_chip = chip; ++ err = snd_bcm2835_new_pcm(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n"); ++ goto out_bcm2835_new_pcm; ++ } ++ ++ err = snd_bcm2835_new_spdif_pcm(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 spdif pcm device\n"); ++ goto out_bcm2835_new_spdif; ++ } ++ ++ err = snd_bcm2835_new_ctl(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n"); ++ goto out_bcm2835_new_ctl; ++ } ++ ++add_register_map: ++ card = g_card; ++ chip = g_chip; ++ ++ BUG_ON(!(card && chip)); ++ ++ chip->avail_substreams |= (1 << dev); ++ chip->pdev[dev] = pdev; ++ ++ if (dev == 0) { ++ err = snd_card_register(card); ++ if (err < 0) { ++ dev_err(&pdev->dev, ++ "Failed to register bcm2835 ALSA card \n"); ++ goto out_card_register; ++ } ++ platform_set_drvdata(pdev, card); ++ audio_info("bcm2835 ALSA card created!\n"); ++ } else { ++ audio_info("bcm2835 ALSA chip created!\n"); ++ platform_set_drvdata(pdev, (void *)dev); ++ } ++ ++ dev++; ++ ++ return 0; ++ ++out_card_register: ++out_bcm2835_new_ctl: ++out_bcm2835_new_spdif: ++out_bcm2835_new_pcm: ++out_bcm2835_create: ++ BUG_ON(!g_card); ++ if (snd_card_free(g_card)) ++ dev_err(&pdev->dev, "Failed to free Registered alsa card\n"); ++ g_card = NULL; ++out: ++ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */ ++ dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n"); ++ return err; ++} ++ ++static int snd_bcm2835_alsa_remove(struct platform_device *pdev) ++{ ++ uint32_t idx; ++ void *drv_data; ++ ++ drv_data = platform_get_drvdata(pdev); ++ ++ if (drv_data == (void *)g_card) { ++ /* This is the card device */ ++ snd_card_free((struct snd_card *)drv_data); ++ g_card = NULL; ++ g_chip = NULL; ++ } else { ++ idx = (uint32_t) drv_data; ++ if (g_card != NULL) { ++ BUG_ON(!g_chip); ++ /* We pass chip device numbers in audio ipc devices ++ * other than the one we registered our card with ++ */ ++ idx = (uint32_t) drv_data; ++ BUG_ON(!idx || idx > MAX_SUBSTREAMS); ++ g_chip->avail_substreams &= ~(1 << idx); ++ /* There should be atleast one substream registered ++ * after we are done here, as it wil be removed when ++ * the *remove* is called for the card device ++ */ ++ BUG_ON(!g_chip->avail_substreams); ++ } ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ return 0; ++} ++ ++static int snd_bcm2835_alsa_resume(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++#endif ++ ++static const struct of_device_id snd_bcm2835_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-audio", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); ++ ++static struct platform_driver bcm2835_alsa0_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD0", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_bcm2835_of_match_table, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa1_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD1", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa2_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD2", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa3_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD3", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa4_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD4", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa5_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD5", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa6_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD6", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa7_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD7", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int bcm2835_alsa_device_init(void) ++{ ++ int err; ++ err = platform_driver_register(&bcm2835_alsa0_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto out; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa1_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_0; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa2_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_1; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa3_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_2; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa4_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_3; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa5_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_4; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa6_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_5; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa7_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_6; ++ } ++ ++ return 0; ++ ++unregister_6: ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++unregister_5: ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++unregister_4: ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++unregister_3: ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++unregister_2: ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++unregister_1: ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++unregister_0: ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++out: ++ return err; ++} ++ ++static void bcm2835_alsa_device_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++ platform_driver_unregister(&bcm2835_alsa7_driver); ++} ++ ++late_initcall(bcm2835_alsa_device_init); ++module_exit(bcm2835_alsa_device_exit); ++ ++MODULE_AUTHOR("Dom Cobley"); ++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2835_alsa"); +diff --git a/sound/arm/bcm2835.h b/sound/arm/bcm2835.h +new file mode 100755 +index 000000000000..0f71c5def314 +--- /dev/null ++++ b/sound/arm/bcm2835.h +@@ -0,0 +1,167 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __SOUND_ARM_BCM2835_H ++#define __SOUND_ARM_BCM2835_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++#define AUDIO_DEBUG_ENABLE ++#define AUDIO_VERBOSE_DEBUG_ENABLE ++*/ ++ ++/* Debug macros */ ++ ++#ifdef AUDIO_DEBUG_ENABLE ++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE ++ ++#define audio_debug(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_info(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#else ++ ++#define audio_debug(fmt, arg...) ++ ++#define audio_info(fmt, arg...) ++ ++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ ++ ++#else ++ ++#define audio_debug(fmt, arg...) ++ ++#define audio_info(fmt, arg...) ++ ++#endif /* AUDIO_DEBUG_ENABLE */ ++ ++#define audio_error(fmt, arg...) \ ++ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_warning(fmt, arg...) \ ++ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_alert(fmt, arg...) \ ++ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define MAX_SUBSTREAMS (8) ++#define AVAIL_SUBSTREAMS_MASK (0xff) ++enum { ++ CTRL_VOL_MUTE, ++ CTRL_VOL_UNMUTE ++}; ++ ++/* macros for alsa2chip and chip2alsa, instead of functions */ ++ ++#define alsa2chip(vol) (uint)(-((vol << 8) / 100)) /* convert alsa to chip volume (defined as macro rather than function call) */ ++#define chip2alsa(vol) -((vol * 100) >> 8) /* convert chip to alsa volume */ ++ ++/* Some constants for values .. */ ++typedef enum { ++ AUDIO_DEST_AUTO = 0, ++ AUDIO_DEST_HEADPHONES = 1, ++ AUDIO_DEST_HDMI = 2, ++ AUDIO_DEST_MAX, ++} SND_BCM2835_ROUTE_T; ++ ++typedef enum { ++ PCM_PLAYBACK_VOLUME, ++ PCM_PLAYBACK_MUTE, ++ PCM_PLAYBACK_DEVICE, ++} SND_BCM2835_CTRL_T; ++ ++/* definition of the chip-specific record */ ++typedef struct bcm2835_chip { ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_pcm *pcm_spdif; ++ /* Bitmat for valid reg_base and irq numbers */ ++ uint32_t avail_substreams; ++ struct platform_device *pdev[MAX_SUBSTREAMS]; ++ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; ++ ++ int volume; ++ int old_volume; /* stores the volume value whist muted */ ++ int dest; ++ int mute; ++ ++ unsigned int opened; ++ unsigned int spdif_status; ++ struct mutex audio_mutex; ++} bcm2835_chip_t; ++ ++typedef struct bcm2835_alsa_stream { ++ bcm2835_chip_t *chip; ++ struct snd_pcm_substream *substream; ++ struct snd_pcm_indirect pcm_indirect; ++ ++ struct semaphore buffers_update_sem; ++ struct semaphore control_sem; ++ spinlock_t lock; ++ volatile uint32_t control; ++ volatile uint32_t status; ++ ++ int open; ++ int running; ++ int draining; ++ ++ int channels; ++ int params_rate; ++ int pcm_format_width; ++ ++ unsigned int pos; ++ unsigned int buffer_size; ++ unsigned int period_size; ++ ++ uint32_t enable_fifo_irq; ++ irq_handler_t fifo_irq_handler; ++ ++ atomic_t retrieved; ++ struct opaque_AUDIO_INSTANCE_T *instance; ++ struct workqueue_struct *my_wq; ++ int idx; ++} bcm2835_alsa_stream_t; ++ ++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip); ++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip); ++int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip); ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps); ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip); ++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count, ++ void *src); ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream); ++ ++#endif /* __SOUND_ARM_BCM2835_H */ +diff --git a/sound/arm/vc_vchi_audioserv_defs.h b/sound/arm/vc_vchi_audioserv_defs.h +new file mode 100644 +index 000000000000..af3e6eb69011 +--- /dev/null ++++ b/sound/arm/vc_vchi_audioserv_defs.h +@@ -0,0 +1,116 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef _VC_AUDIO_DEFS_H_ ++#define _VC_AUDIO_DEFS_H_ ++ ++#define VC_AUDIOSERV_MIN_VER 1 ++#define VC_AUDIOSERV_VER 2 ++ ++// FourCC code used for VCHI connection ++#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") ++ ++// Maximum message length ++#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T )) ++ ++// List of screens that are currently supported ++// All message types supported for HOST->VC direction ++typedef enum { ++ VC_AUDIO_MSG_TYPE_RESULT, // Generic result ++ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result ++ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio ++ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio ++ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio ++ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio ++ VC_AUDIO_MSG_TYPE_START, // Configure audio ++ VC_AUDIO_MSG_TYPE_STOP, // Configure audio ++ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio ++ VC_AUDIO_MSG_TYPE_MAX ++} VC_AUDIO_MSG_TYPE; ++ ++// configure the audio ++typedef struct { ++ uint32_t channels; ++ uint32_t samplerate; ++ uint32_t bps; ++ ++} VC_AUDIO_CONFIG_T; ++ ++typedef struct { ++ uint32_t volume; ++ uint32_t dest; ++ ++} VC_AUDIO_CONTROL_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_OPEN_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_CLOSE_T; ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_START_T; ++// audio ++typedef struct { ++ uint32_t draining; ++ ++} VC_AUDIO_STOP_T; ++ ++// configure the write audio samples ++typedef struct { ++ uint32_t count; // in bytes ++ void *callback; ++ void *cookie; ++ uint16_t silence; ++ uint16_t max_packet; ++} VC_AUDIO_WRITE_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t success; // Success value ++ ++} VC_AUDIO_RESULT_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t count; // Success value ++ void *callback; ++ void *cookie; ++} VC_AUDIO_COMPLETE_T; ++ ++// Message header for all messages in HOST->VC direction ++typedef struct { ++ int32_t type; // Message type (VC_AUDIO_MSG_TYPE) ++ union { ++ VC_AUDIO_CONFIG_T config; ++ VC_AUDIO_CONTROL_T control; ++ VC_AUDIO_OPEN_T open; ++ VC_AUDIO_CLOSE_T close; ++ VC_AUDIO_START_T start; ++ VC_AUDIO_STOP_T stop; ++ VC_AUDIO_WRITE_T write; ++ VC_AUDIO_RESULT_T result; ++ VC_AUDIO_COMPLETE_T complete; ++ } u; ++} VC_AUDIO_MSG_T; ++ ++#endif // _VC_AUDIO_DEFS_H_ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1038_19bdea2fa4cdd16e16daa60300458a85e5b6ac08.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1038_19bdea2fa4cdd16e16daa60300458a85e5b6ac08.patch --- linux-4.9.13/debian/patches/rpi/rpi_1038_19bdea2fa4cdd16e16daa60300458a85e5b6ac08.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1038_19bdea2fa4cdd16e16daa60300458a85e5b6ac08.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,515 @@ +commit 19bdea2fa4cdd16e16daa60300458a85e5b6ac08 +Author: popcornmix +Date: Fri Oct 28 15:36:43 2016 +0100 + + vc_mem: Add vc_mem driver for querying firmware memory addresses + + Signed-off-by: popcornmix + + BCM270x: Move vc_mem + + Make the vc_mem module available for ARCH_BCM2835 by moving it. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +index 2d8bd6e5016a..70379287f626 100644 +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -7,9 +7,19 @@ menuconfig BRCM_CHAR_DRIVERS + help + Broadcom's char drivers + ++if BRCM_CHAR_DRIVERS ++ + config BCM_VC_CMA + bool "Videocore CMA" +- depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ ++ depends on CMA && BCM2708_VCHIQ + default n + help + Helper for videocore CMA access. ++ ++config BCM2708_VCMEM ++ bool "Videocore Memory" ++ default y ++ help ++ Helper for videocore memory access and total size allocation. ++ ++endif +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +index 13c5bca291cc..fce918c369f7 100644 +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1 +1,2 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ ++obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o +diff --git a/drivers/char/broadcom/vc_mem.c b/drivers/char/broadcom/vc_mem.c +new file mode 100644 +index 000000000000..be64f238ee0c +--- /dev/null ++++ b/drivers/char/broadcom/vc_mem.c +@@ -0,0 +1,422 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "vc-mem" ++ ++// Device (/dev) related variables ++static dev_t vc_mem_devnum = 0; ++static struct class *vc_mem_class = NULL; ++static struct cdev vc_mem_cdev; ++static int vc_mem_inited = 0; ++ ++#ifdef CONFIG_DEBUG_FS ++static struct dentry *vc_mem_debugfs_entry; ++#endif ++ ++/* ++ * Videocore memory addresses and size ++ * ++ * Drivers that wish to know the videocore memory addresses and sizes should ++ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in ++ * headers. This allows the other drivers to not be tied down to a a certain ++ * address/size at compile time. ++ * ++ * In the future, the goal is to have the videocore memory virtual address and ++ * size be calculated at boot time rather than at compile time. The decision of ++ * where the videocore memory resides and its size would be in the hands of the ++ * bootloader (and/or kernel). When that happens, the values of these variables ++ * would be calculated and assigned in the init function. ++ */ ++// in the 2835 VC in mapped above ARM, but ARM has full access to VC space ++unsigned long mm_vc_mem_phys_addr = 0x00000000; ++unsigned int mm_vc_mem_size = 0; ++unsigned int mm_vc_mem_base = 0; ++ ++EXPORT_SYMBOL(mm_vc_mem_phys_addr); ++EXPORT_SYMBOL(mm_vc_mem_size); ++EXPORT_SYMBOL(mm_vc_mem_base); ++ ++static uint phys_addr = 0; ++static uint mem_size = 0; ++static uint mem_base = 0; ++ ++ ++/**************************************************************************** ++* ++* vc_mem_open ++* ++***************************************************************************/ ++ ++static int ++vc_mem_open(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_release ++* ++***************************************************************************/ ++ ++static int ++vc_mem_release(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_size ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_size(void) ++{ ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_base ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_base(void) ++{ ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_current_size ++* ++***************************************************************************/ ++ ++int ++vc_mem_get_current_size(void) ++{ ++ return mm_vc_mem_size; ++} ++ ++EXPORT_SYMBOL_GPL(vc_mem_get_current_size); ++ ++/**************************************************************************** ++* ++* vc_mem_ioctl ++* ++***************************************************************************/ ++ ++static long ++vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ (void) cmd; ++ (void) arg; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ switch (cmd) { ++ case VC_MEM_IOC_MEM_PHYS_ADDR: ++ { ++ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", ++ __func__, (void *) mm_vc_mem_phys_addr); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, ++ sizeof (mm_vc_mem_phys_addr)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_SIZE: ++ { ++ // Get the videocore memory size first ++ vc_mem_get_size(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, ++ mm_vc_mem_size); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_size, ++ sizeof (mm_vc_mem_size)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_BASE: ++ { ++ // Get the videocore memory base ++ vc_mem_get_base(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, ++ mm_vc_mem_base); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_base, ++ sizeof (mm_vc_mem_base)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_LOAD: ++ { ++ // Get the videocore memory base ++ vc_mem_get_base(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, ++ mm_vc_mem_base); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_base, ++ sizeof (mm_vc_mem_base)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ default: ++ { ++ return -ENOTTY; ++ } ++ } ++ pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc); ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_mmap ++* ++***************************************************************************/ ++ ++static int ++vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) ++{ ++ int rc = 0; ++ unsigned long length = vma->vm_end - vma->vm_start; ++ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; ++ ++ pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", ++ __func__, (long) vma->vm_start, (long) vma->vm_end, ++ (long) vma->vm_pgoff); ++ ++ if (offset + length > mm_vc_mem_size) { ++ pr_err("%s: length %ld is too big\n", __func__, length); ++ return -EINVAL; ++ } ++ // Do not cache the memory map ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ ++ rc = remap_pfn_range(vma, vma->vm_start, ++ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + ++ vma->vm_pgoff, length, vma->vm_page_prot); ++ if (rc != 0) { ++ pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); ++ } ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for the driver. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_mem_fops = { ++ .owner = THIS_MODULE, ++ .open = vc_mem_open, ++ .release = vc_mem_release, ++ .unlocked_ioctl = vc_mem_ioctl, ++ .mmap = vc_mem_mmap, ++}; ++ ++#ifdef CONFIG_DEBUG_FS ++static void vc_mem_debugfs_deinit(void) ++{ ++ debugfs_remove_recursive(vc_mem_debugfs_entry); ++ vc_mem_debugfs_entry = NULL; ++} ++ ++ ++static int vc_mem_debugfs_init( ++ struct device *dev) ++{ ++ vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL); ++ if (!vc_mem_debugfs_entry) { ++ dev_warn(dev, "could not create debugfs entry\n"); ++ return -EFAULT; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_phys_addr", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_phys_addr)) { ++ dev_warn(dev, "%s:could not create vc_mem_phys entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_size", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_size)) { ++ dev_warn(dev, "%s:could not create vc_mem_size entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_base", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_base)) { ++ dev_warn(dev, "%s:could not create vc_mem_base entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ return 0; ++ ++fail: ++ vc_mem_debugfs_deinit(); ++ return -EFAULT; ++} ++ ++#endif /* CONFIG_DEBUG_FS */ ++ ++ ++/**************************************************************************** ++* ++* vc_mem_init ++* ++***************************************************************************/ ++ ++static int __init ++vc_mem_init(void) ++{ ++ int rc = -EFAULT; ++ struct device *dev; ++ ++ pr_debug("%s: called\n", __func__); ++ ++ mm_vc_mem_phys_addr = phys_addr; ++ mm_vc_mem_size = mem_size; ++ mm_vc_mem_base = mem_base; ++ ++ vc_mem_get_size(); ++ ++ pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", ++ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); ++ ++ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { ++ pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", ++ __func__, rc); ++ goto out_err; ++ } ++ ++ cdev_init(&vc_mem_cdev, &vc_mem_fops); ++ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { ++ pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); ++ goto out_unregister; ++ } ++ ++ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); ++ if (IS_ERR(vc_mem_class)) { ++ rc = PTR_ERR(vc_mem_class); ++ pr_err("%s: class_create failed (rc=%d)\n", __func__, rc); ++ goto out_cdev_del; ++ } ++ ++ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, ++ DRIVER_NAME); ++ if (IS_ERR(dev)) { ++ rc = PTR_ERR(dev); ++ pr_err("%s: device_create failed (rc=%d)\n", __func__, rc); ++ goto out_class_destroy; ++ } ++ ++#ifdef CONFIG_DEBUG_FS ++ /* don't fail if the debug entries cannot be created */ ++ vc_mem_debugfs_init(dev); ++#endif ++ ++ vc_mem_inited = 1; ++ return 0; ++ ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ ++ out_class_destroy: ++ class_destroy(vc_mem_class); ++ vc_mem_class = NULL; ++ ++ out_cdev_del: ++ cdev_del(&vc_mem_cdev); ++ ++ out_unregister: ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ ++ out_err: ++ return -1; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_exit ++* ++***************************************************************************/ ++ ++static void __exit ++vc_mem_exit(void) ++{ ++ pr_debug("%s: called\n", __func__); ++ ++ if (vc_mem_inited) { ++#if CONFIG_DEBUG_FS ++ vc_mem_debugfs_deinit(); ++#endif ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ class_destroy(vc_mem_class); ++ cdev_del(&vc_mem_cdev); ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ } ++} ++ ++module_init(vc_mem_init); ++module_exit(vc_mem_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); ++ ++module_param(phys_addr, uint, 0644); ++module_param(mem_size, uint, 0644); ++module_param(mem_base, uint, 0644); +diff --git a/include/linux/broadcom/vc_mem.h b/include/linux/broadcom/vc_mem.h +new file mode 100644 +index 000000000000..20a475377eb3 +--- /dev/null ++++ b/include/linux/broadcom/vc_mem.h +@@ -0,0 +1,35 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef _VC_MEM_H ++#define _VC_MEM_H ++ ++#include ++ ++#define VC_MEM_IOC_MAGIC 'v' ++ ++#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) ++#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) ++#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) ++#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) ++ ++#if defined( __KERNEL__ ) ++#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF ++ ++extern unsigned long mm_vc_mem_phys_addr; ++extern unsigned int mm_vc_mem_size; ++extern int vc_mem_get_current_size( void ); ++#endif ++ ++#endif /* _VC_MEM_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1039_0956d1bfb3b7132fca2d7094babbdc32944f4b0e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1039_0956d1bfb3b7132fca2d7094babbdc32944f4b0e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1039_0956d1bfb3b7132fca2d7094babbdc32944f4b0e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1039_0956d1bfb3b7132fca2d7094babbdc32944f4b0e.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,4389 @@ +commit 0956d1bfb3b7132fca2d7094babbdc32944f4b0e +Author: Tim Gover +Date: Tue Jul 22 15:41:04 2014 +0100 + + vcsm: VideoCore shared memory service for BCM2835 + + Add experimental support for the VideoCore shared memory service. + This allows user processes to allocate memory from VideoCore's + GPU relocatable heap and mmap the buffers. Additionally, the memory + handles can passed to other VideoCore services such as MMAL, OpenMax + and DispmanX + + TODO + * This driver was originally released for BCM28155 which has a different + cache architecture to BCM2835. Consequently, in this release only + uncached mappings are supported. However, there's no fundamental + reason which cached mappings cannot be support or BCM2835 + * More refactoring is required to remove the typedefs. + * Re-enable the some of the commented out debug-fs statistics which were + disabled when migrating code from proc-fs. + * There's a lot of code to support sharing of VCSM in order to support + Android. This could probably done more cleanly or perhaps just + removed. + + Signed-off-by: Tim Gover + + config: Disable VC_SM for now to fix hang with cutdown kernel + + vcsm: Use boolean as it cannot be built as module + + On building the bcm_vc_sm as a module we get the following error: + + v7_dma_flush_range and do_munmap are undefined in vc-sm.ko. + + Fix by making it not an option to build as module + + vcsm: Add ioctl for custom cache flushing + + vc-sm: Move headers out of arch directory + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +index 70379287f626..75fa1cba7640 100644 +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -23,3 +23,12 @@ config BCM2708_VCMEM + Helper for videocore memory access and total size allocation. + + endif ++ ++config BCM_VC_SM ++ bool "VMCS Shared Memory" ++ depends on BCM2708_VCHIQ ++ select BCM2708_VCMEM ++ default n ++ help ++ Support for the VC shared memory on the Broadcom reference ++ design. Uses the VCHIQ stack. +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +index fce918c369f7..de8feb98c63f 100644 +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ++obj-$(CONFIG_BCM_VC_SM) += vc_sm/ +diff --git a/drivers/char/broadcom/vc_sm/Makefile b/drivers/char/broadcom/vc_sm/Makefile +new file mode 100644 +index 000000000000..19ce263bc273 +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/Makefile +@@ -0,0 +1,9 @@ ++ccflags-$(CONFIG_BCM_VC_SM) += -Werror -Wall -Wstrict-prototypes -Wno-trigraphs -O2 ++ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"$(srctree)/fs/" ++ccflags-$(CONFIG_BCM_VC_SM) += -DOS_ASSERT_FAILURE -D__STDC_VERSION=199901L -D__STDC_VERSION__=199901L -D__VCCOREVER__=0 -D__KERNEL__ -D__linux__ ++ ++obj-$(CONFIG_BCM_VC_SM) := vc-sm.o ++ ++vc-sm-objs := \ ++ vmcs_sm.o \ ++ vc_vchi_sm.o +diff --git a/drivers/char/broadcom/vc_sm/vc_sm_defs.h b/drivers/char/broadcom/vc_sm/vc_sm_defs.h +new file mode 100644 +index 000000000000..c4d5ff718a5b +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_sm_defs.h +@@ -0,0 +1,181 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_SM_DEFS_H__INCLUDED__ ++#define __VC_SM_DEFS_H__INCLUDED__ ++ ++/* FourCC code used for VCHI connection */ ++#define VC_SM_SERVER_NAME MAKE_FOURCC("SMEM") ++ ++/* Maximum message length */ ++#define VC_SM_MAX_MSG_LEN (sizeof(VC_SM_MSG_UNION_T) + \ ++ sizeof(VC_SM_MSG_HDR_T)) ++#define VC_SM_MAX_RSP_LEN (sizeof(VC_SM_MSG_UNION_T)) ++ ++/* Resource name maximum size */ ++#define VC_SM_RESOURCE_NAME 32 ++ ++/* All message types supported for HOST->VC direction */ ++typedef enum { ++ /* Allocate shared memory block */ ++ VC_SM_MSG_TYPE_ALLOC, ++ /* Lock allocated shared memory block */ ++ VC_SM_MSG_TYPE_LOCK, ++ /* Unlock allocated shared memory block */ ++ VC_SM_MSG_TYPE_UNLOCK, ++ /* Unlock allocated shared memory block, do not answer command */ ++ VC_SM_MSG_TYPE_UNLOCK_NOANS, ++ /* Free shared memory block */ ++ VC_SM_MSG_TYPE_FREE, ++ /* Resize a shared memory block */ ++ VC_SM_MSG_TYPE_RESIZE, ++ /* Walk the allocated shared memory block(s) */ ++ VC_SM_MSG_TYPE_WALK_ALLOC, ++ ++ /* A previously applied action will need to be reverted */ ++ VC_SM_MSG_TYPE_ACTION_CLEAN, ++ VC_SM_MSG_TYPE_MAX ++} VC_SM_MSG_TYPE; ++ ++/* Type of memory to be allocated */ ++typedef enum { ++ VC_SM_ALLOC_CACHED, ++ VC_SM_ALLOC_NON_CACHED, ++ ++} VC_SM_ALLOC_TYPE_T; ++ ++/* Message header for all messages in HOST->VC direction */ ++typedef struct { ++ int32_t type; ++ uint32_t trans_id; ++ uint8_t body[0]; ++ ++} VC_SM_MSG_HDR_T; ++ ++/* Request to allocate memory (HOST->VC) */ ++typedef struct { ++ /* type of memory to allocate */ ++ VC_SM_ALLOC_TYPE_T type; ++ /* byte amount of data to allocate per unit */ ++ uint32_t base_unit; ++ /* number of unit to allocate */ ++ uint32_t num_unit; ++ /* alignement to be applied on allocation */ ++ uint32_t alignement; ++ /* identity of who allocated this block */ ++ uint32_t allocator; ++ /* resource name (for easier tracking on vc side) */ ++ char name[VC_SM_RESOURCE_NAME]; ++ ++} VC_SM_ALLOC_T; ++ ++/* Result of a requested memory allocation (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ /* Resource handle */ ++ uint32_t res_handle; ++ /* Pointer to resource buffer */ ++ void *res_mem; ++ /* Resource base size (bytes) */ ++ uint32_t res_base_size; ++ /* Resource number */ ++ uint32_t res_num; ++ ++} VC_SM_ALLOC_RESULT_T; ++ ++/* Request to free a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ ++} VC_SM_FREE_T; ++ ++/* Request to lock a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ ++} VC_SM_LOCK_UNLOCK_T; ++ ++/* Request to resize a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ /* Resource *new* size requested (bytes) */ ++ uint32_t res_new_size; ++ ++} VC_SM_RESIZE_T; ++ ++/* Result of a requested memory lock (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ /* Resource handle */ ++ uint32_t res_handle; ++ /* Pointer to resource buffer */ ++ void *res_mem; ++ /* Pointer to former resource buffer if the memory ++ * was reallocated */ ++ void *res_old_mem; ++ ++} VC_SM_LOCK_RESULT_T; ++ ++/* Generic result for a request (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ int32_t success; ++ ++} VC_SM_RESULT_T; ++ ++/* Request to revert a previously applied action (HOST->VC) */ ++typedef struct { ++ /* Action of interest */ ++ VC_SM_MSG_TYPE res_action; ++ /* Transaction identifier for the action of interest */ ++ uint32_t action_trans_id; ++ ++} VC_SM_ACTION_CLEAN_T; ++ ++/* Request to remove all data associated with a given allocator (HOST->VC) */ ++typedef struct { ++ /* Allocator identifier */ ++ uint32_t allocator; ++ ++} VC_SM_FREE_ALL_T; ++ ++/* Union of ALL messages */ ++typedef union { ++ VC_SM_ALLOC_T alloc; ++ VC_SM_ALLOC_RESULT_T alloc_result; ++ VC_SM_FREE_T free; ++ VC_SM_ACTION_CLEAN_T action_clean; ++ VC_SM_RESIZE_T resize; ++ VC_SM_LOCK_RESULT_T lock_result; ++ VC_SM_RESULT_T result; ++ VC_SM_FREE_ALL_T free_all; ++ ++} VC_SM_MSG_UNION_T; ++ ++#endif /* __VC_SM_DEFS_H__INCLUDED__ */ +diff --git a/drivers/char/broadcom/vc_sm/vc_sm_knl.h b/drivers/char/broadcom/vc_sm/vc_sm_knl.h +new file mode 100644 +index 000000000000..965f9a209a02 +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_sm_knl.h +@@ -0,0 +1,55 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_SM_KNL_H__INCLUDED__ ++#define __VC_SM_KNL_H__INCLUDED__ ++ ++#if !defined(__KERNEL__) ++#error "This interface is for kernel use only..." ++#endif ++ ++/* Type of memory to be locked (ie mapped) */ ++typedef enum { ++ VC_SM_LOCK_CACHED, ++ VC_SM_LOCK_NON_CACHED, ++ ++} VC_SM_LOCK_CACHE_MODE_T; ++ ++/* Allocate a shared memory handle and block. ++*/ ++int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle); ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++int vc_sm_free(int handle); ++ ++/* Lock a memory handle for use by kernel. ++*/ ++int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data); ++ ++/* Unlock a memory handle in use by kernel. ++*/ ++int vc_sm_unlock(int handle, int flush, int no_vc_unlock); ++ ++/* Get an internal resource handle mapped from the external one. ++*/ ++int vc_sm_int_handle(int handle); ++ ++/* Map a shared memory region for use by kernel. ++*/ ++int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data); ++ ++#endif /* __VC_SM_KNL_H__INCLUDED__ */ +diff --git a/drivers/char/broadcom/vc_sm/vc_vchi_sm.c b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c +new file mode 100644 +index 000000000000..7c6ba1a244a8 +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c +@@ -0,0 +1,492 @@ ++/***************************************************************************** ++* Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_vchi_sm.h" ++ ++#define VC_SM_VER 1 ++#define VC_SM_MIN_VER 0 ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++/* Command blocks come from a pool */ ++#define SM_MAX_NUM_CMD_RSP_BLKS 32 ++ ++struct sm_cmd_rsp_blk { ++ struct list_head head; /* To create lists */ ++ struct semaphore sema; /* To be signaled when the response is there */ ++ ++ uint16_t id; ++ uint16_t length; ++ ++ uint8_t msg[VC_SM_MAX_MSG_LEN]; ++ ++ uint32_t wait:1; ++ uint32_t sent:1; ++ uint32_t alloc:1; ++ ++}; ++ ++struct sm_instance { ++ uint32_t num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ struct task_struct *io_thread; ++ struct semaphore io_sema; ++ ++ uint32_t trans_id; ++ ++ struct mutex lock; ++ struct list_head cmd_list; ++ struct list_head rsp_list; ++ struct list_head dead_list; ++ ++ struct sm_cmd_rsp_blk free_blk[SM_MAX_NUM_CMD_RSP_BLKS]; ++ struct list_head free_list; ++ struct mutex free_lock; ++ struct semaphore free_sema; ++ ++}; ++ ++/* ---- Private Variables ------------------------------------------------ */ ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++static struct ++sm_cmd_rsp_blk *vc_vchi_cmd_create(struct sm_instance *instance, ++ VC_SM_MSG_TYPE id, void *msg, ++ uint32_t size, int wait) ++{ ++ struct sm_cmd_rsp_blk *blk; ++ VC_SM_MSG_HDR_T *hdr; ++ ++ if (down_interruptible(&instance->free_sema)) { ++ blk = kmalloc(sizeof(*blk), GFP_KERNEL); ++ if (!blk) ++ return NULL; ++ ++ blk->alloc = 1; ++ sema_init(&blk->sema, 0); ++ } else { ++ mutex_lock(&instance->free_lock); ++ blk = ++ list_first_entry(&instance->free_list, ++ struct sm_cmd_rsp_blk, head); ++ list_del(&blk->head); ++ mutex_unlock(&instance->free_lock); ++ } ++ ++ blk->sent = 0; ++ blk->wait = wait; ++ blk->length = sizeof(*hdr) + size; ++ ++ hdr = (VC_SM_MSG_HDR_T *) blk->msg; ++ hdr->type = id; ++ mutex_lock(&instance->lock); ++ hdr->trans_id = blk->id = ++instance->trans_id; ++ mutex_unlock(&instance->lock); ++ ++ if (size) ++ memcpy(hdr->body, msg, size); ++ ++ return blk; ++} ++ ++static void ++vc_vchi_cmd_delete(struct sm_instance *instance, struct sm_cmd_rsp_blk *blk) ++{ ++ if (blk->alloc) { ++ kfree(blk); ++ return; ++ } ++ ++ mutex_lock(&instance->free_lock); ++ list_add(&blk->head, &instance->free_list); ++ mutex_unlock(&instance->free_lock); ++ up(&instance->free_sema); ++} ++ ++static int vc_vchi_sm_videocore_io(void *arg) ++{ ++ struct sm_instance *instance = arg; ++ struct sm_cmd_rsp_blk *cmd = NULL, *cmd_tmp; ++ VC_SM_RESULT_T *reply; ++ uint32_t reply_len; ++ int32_t status; ++ int svc_use = 1; ++ ++ while (1) { ++ if (svc_use) ++ vchi_service_release(instance->vchi_handle[0]); ++ svc_use = 0; ++ if (!down_interruptible(&instance->io_sema)) { ++ vchi_service_use(instance->vchi_handle[0]); ++ svc_use = 1; ++ ++ do { ++ unsigned int flags; ++ /* ++ * Get new command and move it to response list ++ */ ++ mutex_lock(&instance->lock); ++ if (list_empty(&instance->cmd_list)) { ++ /* no more commands to process */ ++ mutex_unlock(&instance->lock); ++ break; ++ } ++ cmd = ++ list_first_entry(&instance->cmd_list, ++ struct sm_cmd_rsp_blk, ++ head); ++ list_move(&cmd->head, &instance->rsp_list); ++ cmd->sent = 1; ++ mutex_unlock(&instance->lock); ++ ++ /* Send the command */ ++ flags = VCHI_FLAGS_BLOCK_UNTIL_QUEUED; ++ status = vchi_msg_queue( ++ instance->vchi_handle[0], ++ cmd->msg, cmd->length, ++ flags, NULL); ++ if (status) { ++ pr_err("%s: failed to queue message (%d)", ++ __func__, status); ++ } ++ ++ /* If no reply is needed then we're done */ ++ if (!cmd->wait) { ++ mutex_lock(&instance->lock); ++ list_del(&cmd->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd); ++ continue; ++ } ++ ++ if (status) { ++ up(&cmd->sema); ++ continue; ++ } ++ ++ } while (1); ++ ++ while (!vchi_msg_peek ++ (instance->vchi_handle[0], (void **)&reply, ++ &reply_len, VCHI_FLAGS_NONE)) { ++ mutex_lock(&instance->lock); ++ list_for_each_entry(cmd, &instance->rsp_list, ++ head) { ++ if (cmd->id == reply->trans_id) ++ break; ++ } ++ mutex_unlock(&instance->lock); ++ ++ if (&cmd->head == &instance->rsp_list) { ++ pr_debug("%s: received response %u, throw away...", ++ __func__, reply->trans_id); ++ } else if (reply_len > sizeof(cmd->msg)) { ++ pr_err("%s: reply too big (%u) %u, throw away...", ++ __func__, reply_len, ++ reply->trans_id); ++ } else { ++ memcpy(cmd->msg, reply, reply_len); ++ up(&cmd->sema); ++ } ++ ++ vchi_msg_remove(instance->vchi_handle[0]); ++ } ++ ++ /* Go through the dead list and free them */ ++ mutex_lock(&instance->lock); ++ list_for_each_entry_safe(cmd, cmd_tmp, ++ &instance->dead_list, head) { ++ list_del(&cmd->head); ++ vc_vchi_cmd_delete(instance, cmd); ++ } ++ mutex_unlock(&instance->lock); ++ } ++ } ++ ++ return 0; ++} ++ ++static void vc_sm_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ struct sm_instance *instance = param; ++ ++ (void)msg_handle; ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ up(&instance->io_sema); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ pr_info("%s: service CLOSED!!", __func__); ++ default: ++ break; ++ } ++} ++ ++VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T **vchi_connections, ++ uint32_t num_connections) ++{ ++ uint32_t i; ++ struct sm_instance *instance; ++ int status; ++ ++ pr_debug("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ pr_err("%s: unsupported number of connections %u (max=%u)", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ goto err_null; ++ } ++ /* Allocate memory for this instance */ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ ++ /* Misc initialisations */ ++ mutex_init(&instance->lock); ++ sema_init(&instance->io_sema, 0); ++ INIT_LIST_HEAD(&instance->cmd_list); ++ INIT_LIST_HEAD(&instance->rsp_list); ++ INIT_LIST_HEAD(&instance->dead_list); ++ INIT_LIST_HEAD(&instance->free_list); ++ sema_init(&instance->free_sema, SM_MAX_NUM_CMD_RSP_BLKS); ++ mutex_init(&instance->free_lock); ++ for (i = 0; i < SM_MAX_NUM_CMD_RSP_BLKS; i++) { ++ sema_init(&instance->free_blk[i].sema, 0); ++ list_add(&instance->free_blk[i].head, &instance->free_list); ++ } ++ ++ /* Open the VCHI service connections */ ++ instance->num_connections = num_connections; ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), ++ VC_SM_SERVER_NAME, ++ vchi_connections[i], ++ 0, ++ 0, ++ vc_sm_vchi_callback, ++ instance, ++ 0, ++ 0, ++ 0, ++ }; ++ ++ status = vchi_service_open(vchi_instance, ++ ¶ms, &instance->vchi_handle[i]); ++ if (status) { ++ pr_err("%s: failed to open VCHI service (%d)", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ } ++ ++ /* Create the thread which takes care of all io to/from videoocore. */ ++ instance->io_thread = kthread_create(&vc_vchi_sm_videocore_io, ++ (void *)instance, "SMIO"); ++ if (instance->io_thread == NULL) { ++ pr_err("%s: failed to create SMIO thread", __func__); ++ ++ goto err_close_services; ++ } ++ set_user_nice(instance->io_thread, -10); ++ wake_up_process(instance->io_thread); ++ ++ pr_debug("%s: success - instance 0x%x", __func__, (unsigned)instance); ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ if (instance->vchi_handle[i] != NULL) ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ kfree(instance); ++err_null: ++ pr_debug("%s: FAILED", __func__); ++ return NULL; ++} ++ ++int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle) ++{ ++ struct sm_instance *instance; ++ uint32_t i; ++ ++ if (handle == NULL) { ++ pr_err("%s: invalid pointer to handle %p", __func__, handle); ++ goto lock; ++ } ++ ++ if (*handle == NULL) { ++ pr_err("%s: invalid handle %p", __func__, *handle); ++ goto lock; ++ } ++ ++ instance = *handle; ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ int32_t success; ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ kfree(instance); ++ ++ *handle = NULL; ++ return 0; ++ ++lock: ++ return -EINVAL; ++} ++ ++int vc_vchi_sm_send_msg(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_MSG_TYPE msg_id, ++ void *msg, uint32_t msg_size, ++ void *result, uint32_t result_size, ++ uint32_t *cur_trans_id, uint8_t wait_reply) ++{ ++ int status = 0; ++ struct sm_instance *instance = handle; ++ struct sm_cmd_rsp_blk *cmd_blk; ++ ++ if (handle == NULL) { ++ pr_err("%s: invalid handle", __func__); ++ return -EINVAL; ++ } ++ if (msg == NULL) { ++ pr_err("%s: invalid msg pointer", __func__); ++ return -EINVAL; ++ } ++ ++ cmd_blk = ++ vc_vchi_cmd_create(instance, msg_id, msg, msg_size, wait_reply); ++ if (cmd_blk == NULL) { ++ pr_err("[%s]: failed to allocate global tracking resource", ++ __func__); ++ return -ENOMEM; ++ } ++ ++ if (cur_trans_id != NULL) ++ *cur_trans_id = cmd_blk->id; ++ ++ mutex_lock(&instance->lock); ++ list_add_tail(&cmd_blk->head, &instance->cmd_list); ++ mutex_unlock(&instance->lock); ++ up(&instance->io_sema); ++ ++ if (!wait_reply) ++ /* We're done */ ++ return 0; ++ ++ /* Wait for the response */ ++ if (down_interruptible(&cmd_blk->sema)) { ++ mutex_lock(&instance->lock); ++ if (!cmd_blk->sent) { ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return -ENXIO; ++ } ++ mutex_unlock(&instance->lock); ++ ++ mutex_lock(&instance->lock); ++ list_move(&cmd_blk->head, &instance->dead_list); ++ mutex_unlock(&instance->lock); ++ up(&instance->io_sema); ++ return -EINTR; /* We're done */ ++ } ++ ++ if (result && result_size) { ++ memcpy(result, cmd_blk->msg, result_size); ++ } else { ++ VC_SM_RESULT_T *res = (VC_SM_RESULT_T *) cmd_blk->msg; ++ status = (res->success == 0) ? 0 : -ENXIO; ++ } ++ ++ mutex_lock(&instance->lock); ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return status; ++} ++ ++int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, VC_SM_ALLOC_T *msg, ++ VC_SM_ALLOC_RESULT_T *result, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ALLOC, ++ msg, sizeof(*msg), result, sizeof(*result), ++ cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_FREE_T *msg, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_FREE, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, 0); ++} ++ ++int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *msg, ++ VC_SM_LOCK_RESULT_T *result, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_LOCK, ++ msg, sizeof(*msg), result, sizeof(*result), ++ cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *msg, ++ uint32_t *cur_trans_id, uint8_t wait_reply) ++{ ++ return vc_vchi_sm_send_msg(handle, wait_reply ? ++ VC_SM_MSG_TYPE_UNLOCK : ++ VC_SM_MSG_TYPE_UNLOCK_NOANS, msg, ++ sizeof(*msg), 0, 0, cur_trans_id, ++ wait_reply); ++} ++ ++int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, VC_SM_RESIZE_T *msg, ++ uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_RESIZE, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_WALK_ALLOC, ++ 0, 0, 0, 0, 0, 0); ++} ++ ++int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, VC_SM_ACTION_CLEAN_T *msg) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ACTION_CLEAN, ++ msg, sizeof(*msg), 0, 0, 0, 0); ++} +diff --git a/drivers/char/broadcom/vc_sm/vc_vchi_sm.h b/drivers/char/broadcom/vc_sm/vc_vchi_sm.h +new file mode 100644 +index 000000000000..5e279f5a95fa +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.h +@@ -0,0 +1,82 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_VCHI_SM_H__INCLUDED__ ++#define __VC_VCHI_SM_H__INCLUDED__ ++ ++#include "interface/vchi/vchi.h" ++ ++#include "vc_sm_defs.h" ++ ++/* Forward declare. ++*/ ++typedef struct sm_instance *VC_VCHI_SM_HANDLE_T; ++ ++/* Initialize the shared memory service, opens up vchi connection to talk to it. ++*/ ++VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T **vchi_connections, ++ uint32_t num_connections); ++ ++/* Terminates the shared memory service. ++*/ ++int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle); ++ ++/* Ask the shared memory service to allocate some memory on videocre and ++** return the result of this allocation (which upon success will be a pointer ++** to some memory in videocore space). ++*/ ++int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_ALLOC_T *alloc, ++ VC_SM_ALLOC_RESULT_T *alloc_result, uint32_t *trans_id); ++ ++/* Ask the shared memory service to free up some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_FREE_T *free, uint32_t *trans_id); ++ ++/* Ask the shared memory service to lock up some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *lock_unlock, ++ VC_SM_LOCK_RESULT_T *lock_result, uint32_t *trans_id); ++ ++/* Ask the shared memory service to unlock some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *lock_unlock, ++ uint32_t *trans_id, uint8_t wait_reply); ++ ++/* Ask the shared memory service to resize some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_RESIZE_T *resize, uint32_t *trans_id); ++ ++/* Walk the allocated resources on the videocore side, the allocation will ++** show up in the log. This is purely for debug/information and takes no ++** specific actions. ++*/ ++int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle); ++ ++/* Clean up following a previously interrupted action which left the system ++** in a bad state of some sort. ++*/ ++int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_ACTION_CLEAN_T *action_clean); ++ ++#endif /* __VC_VCHI_SM_H__INCLUDED__ */ +diff --git a/drivers/char/broadcom/vc_sm/vmcs_sm.c b/drivers/char/broadcom/vc_sm/vmcs_sm.c +new file mode 100644 +index 000000000000..1db6716c2c0c +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c +@@ -0,0 +1,3213 @@ ++/***************************************************************************** ++* Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vchiq_connected.h" ++#include "vc_vchi_sm.h" ++ ++#include ++#include "vc_sm_knl.h" ++ ++/* ---- Private Constants and Types --------------------------------------- */ ++ ++#define DEVICE_NAME "vcsm" ++#define DEVICE_MINOR 0 ++ ++#define VC_SM_DIR_ROOT_NAME "vc-smem" ++#define VC_SM_DIR_ALLOC_NAME "alloc" ++#define VC_SM_STATE "state" ++#define VC_SM_STATS "statistics" ++#define VC_SM_RESOURCES "resources" ++#define VC_SM_DEBUG "debug" ++#define VC_SM_WRITE_BUF_SIZE 128 ++ ++/* Statistics tracked per resource and globally. ++*/ ++enum SM_STATS_T { ++ /* Attempt. */ ++ ALLOC, ++ FREE, ++ LOCK, ++ UNLOCK, ++ MAP, ++ FLUSH, ++ INVALID, ++ ++ END_ATTEMPT, ++ ++ /* Failure. */ ++ ALLOC_FAIL, ++ FREE_FAIL, ++ LOCK_FAIL, ++ UNLOCK_FAIL, ++ MAP_FAIL, ++ FLUSH_FAIL, ++ INVALID_FAIL, ++ ++ END_ALL, ++ ++}; ++ ++static const char *const sm_stats_human_read[] = { ++ "Alloc", ++ "Free", ++ "Lock", ++ "Unlock", ++ "Map", ++ "Cache Flush", ++ "Cache Invalidate", ++}; ++ ++typedef int (*VC_SM_SHOW) (struct seq_file *s, void *v); ++struct SM_PDE_T { ++ VC_SM_SHOW show; /* Debug fs function hookup. */ ++ struct dentry *dir_entry; /* Debug fs directory entry. */ ++ void *priv_data; /* Private data */ ++ ++}; ++ ++/* Single resource allocation tracked for all devices. ++*/ ++struct sm_mmap { ++ struct list_head map_list; /* Linked list of maps. */ ++ ++ struct SM_RESOURCE_T *resource; /* Pointer to the resource. */ ++ ++ pid_t res_pid; /* PID owning that resource. */ ++ unsigned int res_vc_hdl; /* Resource handle (videocore). */ ++ unsigned int res_usr_hdl; /* Resource handle (user). */ ++ ++ long unsigned int res_addr; /* Mapped virtual address. */ ++ struct vm_area_struct *vma; /* VM area for this mapping. */ ++ unsigned int ref_count; /* Reference count to this vma. */ ++ ++ /* Used to link maps associated with a resource. */ ++ struct list_head resource_map_list; ++}; ++ ++/* Single resource allocation tracked for each opened device. ++*/ ++struct SM_RESOURCE_T { ++ struct list_head resource_list; /* List of resources. */ ++ struct list_head global_resource_list; /* Global list of resources. */ ++ ++ pid_t pid; /* PID owning that resource. */ ++ uint32_t res_guid; /* Unique identifier. */ ++ uint32_t lock_count; /* Lock count for this resource. */ ++ uint32_t ref_count; /* Ref count for this resource. */ ++ ++ uint32_t res_handle; /* Resource allocation handle. */ ++ void *res_base_mem; /* Resource base memory address. */ ++ uint32_t res_size; /* Resource size allocated. */ ++ enum vmcs_sm_cache_e res_cached; /* Resource cache type. */ ++ struct SM_RESOURCE_T *res_shared; /* Shared resource */ ++ ++ enum SM_STATS_T res_stats[END_ALL]; /* Resource statistics. */ ++ ++ uint8_t map_count; /* Counter of mappings for this resource. */ ++ struct list_head map_list; /* Maps associated with a resource. */ ++ ++ struct SM_PRIV_DATA_T *private; ++}; ++ ++/* Private file data associated with each opened device. ++*/ ++struct SM_PRIV_DATA_T { ++ struct list_head resource_list; /* List of resources. */ ++ ++ pid_t pid; /* PID of creator. */ ++ ++ struct dentry *dir_pid; /* Debug fs entries root. */ ++ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ ++ struct SM_PDE_T dir_res; /* Debug fs resource sub-tree. */ ++ ++ int restart_sys; /* Tracks restart on interrupt. */ ++ VC_SM_MSG_TYPE int_action; /* Interrupted action. */ ++ uint32_t int_trans_id; /* Interrupted transaction. */ ++ ++}; ++ ++/* Global state information. ++*/ ++struct SM_STATE_T { ++ VC_VCHI_SM_HANDLE_T sm_handle; /* Handle for videocore service. */ ++ struct dentry *dir_root; /* Debug fs entries root. */ ++ struct dentry *dir_alloc; /* Debug fs entries allocations. */ ++ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ ++ struct SM_PDE_T dir_state; /* Debug fs entries state sub-tree. */ ++ struct dentry *debug; /* Debug fs entries debug. */ ++ ++ struct mutex map_lock; /* Global map lock. */ ++ struct list_head map_list; /* List of maps. */ ++ struct list_head resource_list; /* List of resources. */ ++ ++ enum SM_STATS_T deceased[END_ALL]; /* Natural termination stats. */ ++ enum SM_STATS_T terminated[END_ALL]; /* Forced termination stats. */ ++ uint32_t res_deceased_cnt; /* Natural termination counter. */ ++ uint32_t res_terminated_cnt; /* Forced termination counter. */ ++ ++ struct cdev sm_cdev; /* Device. */ ++ dev_t sm_devid; /* Device identifier. */ ++ struct class *sm_class; /* Class. */ ++ struct device *sm_dev; /* Device. */ ++ ++ struct SM_PRIV_DATA_T *data_knl; /* Kernel internal data tracking. */ ++ ++ struct mutex lock; /* Global lock. */ ++ uint32_t guid; /* GUID (next) tracker. */ ++ ++}; ++ ++/* ---- Private Variables ----------------------------------------------- */ ++ ++static struct SM_STATE_T *sm_state; ++static int sm_inited; ++ ++#if 0 ++static const char *const sm_cache_map_vector[] = { ++ "(null)", ++ "host", ++ "videocore", ++ "host+videocore", ++}; ++#endif ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++ ++static inline unsigned vcaddr_to_pfn(unsigned long vc_addr) ++{ ++ unsigned long pfn = vc_addr & 0x3FFFFFFF; ++ pfn += mm_vc_mem_phys_addr; ++ pfn >>= PAGE_SHIFT; ++ return pfn; ++} ++ ++/* Carries over to the state statistics the statistics once owned by a deceased ++** resource. ++*/ ++static void vc_sm_resource_deceased(struct SM_RESOURCE_T *p_res, int terminated) ++{ ++ if (sm_state != NULL) { ++ if (p_res != NULL) { ++ int ix; ++ ++ if (terminated) ++ sm_state->res_terminated_cnt++; ++ else ++ sm_state->res_deceased_cnt++; ++ ++ for (ix = 0; ix < END_ALL; ix++) { ++ if (terminated) ++ sm_state->terminated[ix] += ++ p_res->res_stats[ix]; ++ else ++ sm_state->deceased[ix] += ++ p_res->res_stats[ix]; ++ } ++ } ++ } ++} ++ ++/* Fetch a videocore handle corresponding to a mapping of the pid+address ++** returns 0 (ie NULL) if no such handle exists in the global map. ++*/ ++static unsigned int vmcs_sm_vc_handle_from_pid_and_address(unsigned int pid, ++ unsigned int addr) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int handle = 0; ++ ++ if (!sm_state || addr == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_addr != addr) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> vc-hdl %x (usr-hdl %x)\n", ++ __func__, map, map->res_pid, map->res_addr, ++ map->res_vc_hdl, map->res_usr_hdl); ++ ++ handle = map->res_vc_hdl; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ ** for something that is not mapped, we do not want a kernel log each ++ ** time around. ++ ** ++ ** There are other error log that would pop up accordingly if someone ++ ** subsequently tries to use something invalid after being told not to ++ ** use it... ++ */ ++ if (handle == 0) { ++ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", ++ __func__, pid, addr); ++ } ++ ++ return handle; ++} ++ ++/* Fetch a user handle corresponding to a mapping of the pid+address ++** returns 0 (ie NULL) if no such handle exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_handle_from_pid_and_address(unsigned int pid, ++ unsigned int addr) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int handle = 0; ++ ++ if (!sm_state || addr == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_addr != addr) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> usr-hdl %x (vc-hdl %x)\n", ++ __func__, map, map->res_pid, map->res_addr, ++ map->res_usr_hdl, map->res_vc_hdl); ++ ++ handle = map->res_usr_hdl; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ * for something that is not mapped yet. ++ * ++ * There are other error log that would pop up accordingly if someone ++ * subsequently tries to use something invalid after being told not to ++ * use it... ++ */ ++ if (handle == 0) ++ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", ++ __func__, pid, addr); ++ ++ return handle; ++} ++ ++#if defined(DO_NOT_USE) ++/* Fetch an address corresponding to a mapping of the pid+handle ++** returns 0 (ie NULL) if no such address exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_address_from_pid_and_vc_handle(unsigned int pid, ++ unsigned int hdl) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int addr = 0; ++ ++ if (sm_state == NULL || hdl == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_vc_hdl != hdl) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ ++ addr = map->res_addr; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ ** for something that is not mapped, we do not want a kernel log each ++ ** time around. ++ ** ++ ** There are other error log that would pop up accordingly if someone ++ ** subsequently tries to use something invalid after being told not to ++ ** use it... ++ */ ++ if (addr == 0) ++ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", ++ __func__, pid, hdl); ++ ++ return addr; ++} ++#endif ++ ++/* Fetch an address corresponding to a mapping of the pid+handle ++** returns 0 (ie NULL) if no such address exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_address_from_pid_and_usr_handle(unsigned int ++ pid, ++ unsigned int ++ hdl) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int addr = 0; ++ ++ if (sm_state == NULL || hdl == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_usr_hdl != hdl) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ ++ addr = map->res_addr; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ * for something that is not mapped, we do not want a kernel log each ++ * time around. ++ * ++ * There are other error log that would pop up accordingly if someone ++ * subsequently tries to use something invalid after being told not to ++ * use it... ++ */ ++ if (addr == 0) ++ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", __func__, ++ pid, hdl); ++ ++ return addr; ++} ++ ++/* Adds a resource mapping to the global data list. ++*/ ++static void vmcs_sm_add_map(struct SM_STATE_T *state, ++ struct SM_RESOURCE_T *resource, struct sm_mmap *map) ++{ ++ mutex_lock(&(state->map_lock)); ++ ++ /* Add to the global list of mappings ++ */ ++ list_add(&map->map_list, &state->map_list); ++ ++ /* Add to the list of mappings for this resource ++ */ ++ list_add(&map->resource_map_list, &resource->map_list); ++ resource->map_count++; ++ ++ mutex_unlock(&(state->map_lock)); ++ ++ pr_debug("[%s]: added map %p (pid %u, vc-hdl %x, usr-hdl %x, addr %lx)\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++} ++ ++/* Removes a resource mapping from the global data list. ++*/ ++static void vmcs_sm_remove_map(struct SM_STATE_T *state, ++ struct SM_RESOURCE_T *resource, ++ struct sm_mmap *map) ++{ ++ mutex_lock(&(state->map_lock)); ++ ++ /* Remove from the global list of mappings ++ */ ++ list_del(&map->map_list); ++ ++ /* Remove from the list of mapping for this resource ++ */ ++ list_del(&map->resource_map_list); ++ if (resource->map_count > 0) ++ resource->map_count--; ++ ++ mutex_unlock(&(state->map_lock)); ++ ++ pr_debug("[%s]: removed map %p (pid %d, vc-hdl %x, usr-hdl %x, addr %lx)\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, map->res_usr_hdl, ++ map->res_addr); ++ ++ kfree(map); ++} ++ ++/* Read callback for the global state proc entry. ++*/ ++static int vc_sm_global_state_show(struct seq_file *s, void *v) ++{ ++ struct sm_mmap *map = NULL; ++ int map_count = 0; ++ ++ if (sm_state == NULL) ++ return 0; ++ ++ seq_printf(s, "\nVC-ServiceHandle 0x%x\n", ++ (unsigned int)sm_state->sm_handle); ++ ++ /* Log all applicable mapping(s). ++ */ ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ map_count++; ++ ++ seq_printf(s, "\nMapping 0x%x\n", ++ (unsigned int)map); ++ seq_printf(s, " TGID %u\n", ++ map->res_pid); ++ seq_printf(s, " VC-HDL 0x%x\n", ++ map->res_vc_hdl); ++ seq_printf(s, " USR-HDL 0x%x\n", ++ map->res_usr_hdl); ++ seq_printf(s, " USR-ADDR 0x%lx\n", ++ map->res_addr); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ seq_printf(s, "\n\nTotal map count: %d\n\n", map_count); ++ ++ return 0; ++} ++ ++static int vc_sm_global_statistics_show(struct seq_file *s, void *v) ++{ ++ int ix; ++ ++ /* Global state tracked statistics. ++ */ ++ if (sm_state != NULL) { ++ seq_puts(s, "\nDeceased Resources Statistics\n"); ++ ++ seq_printf(s, "\nNatural Cause (%u occurences)\n", ++ sm_state->res_deceased_cnt); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->deceased[ix] > 0) { ++ seq_printf(s, " %u\t%s\n", ++ sm_state->deceased[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->deceased[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, " %u\tFAILED %s\n", ++ sm_state->deceased[ix + END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ ++ seq_printf(s, "\nForcefull (%u occurences)\n", ++ sm_state->res_terminated_cnt); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->terminated[ix] > 0) { ++ seq_printf(s, " %u\t%s\n", ++ sm_state->terminated[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->terminated[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, " %u\tFAILED %s\n", ++ sm_state->terminated[ix + ++ END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++#if 0 ++/* Read callback for the statistics proc entry. ++*/ ++static int vc_sm_statistics_show(struct seq_file *s, void *v) ++{ ++ int ix; ++ struct SM_PRIV_DATA_T *file_data; ++ struct SM_RESOURCE_T *resource; ++ int res_count = 0; ++ struct SM_PDE_T *p_pde; ++ ++ p_pde = (struct SM_PDE_T *)(s->private); ++ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); ++ ++ if (file_data == NULL) ++ return 0; ++ ++ /* Per process statistics. ++ */ ++ ++ seq_printf(s, "\nStatistics for TGID %d\n", file_data->pid); ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ res_count++; ++ ++ seq_printf(s, "\nGUID: 0x%x\n\n", ++ resource->res_guid); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (resource->res_stats[ix] > 0) { ++ seq_printf(s, ++ " %u\t%s\n", ++ resource->res_stats[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (resource->res_stats[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, ++ " %u\tFAILED %s\n", ++ resource->res_stats[ ++ ix + END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ seq_printf(s, "\nResources Count %d\n", res_count); ++ ++ return 0; ++} ++#endif ++ ++#if 0 ++/* Read callback for the allocation proc entry. */ ++static int vc_sm_alloc_show(struct seq_file *s, void *v) ++{ ++ struct SM_PRIV_DATA_T *file_data; ++ struct SM_RESOURCE_T *resource; ++ int alloc_count = 0; ++ struct SM_PDE_T *p_pde; ++ ++ p_pde = (struct SM_PDE_T *)(s->private); ++ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); ++ ++ if (!file_data) ++ return 0; ++ ++ /* Per process statistics. */ ++ seq_printf(s, "\nAllocation for TGID %d\n", file_data->pid); ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ alloc_count++; ++ ++ seq_printf(s, "\nGUID: 0x%x\n", ++ resource->res_guid); ++ seq_printf(s, "Lock Count: %u\n", ++ resource->lock_count); ++ seq_printf(s, "Mapped: %s\n", ++ (resource->map_count ? "yes" : "no")); ++ seq_printf(s, "VC-handle: 0x%x\n", ++ resource->res_handle); ++ seq_printf(s, "VC-address: 0x%p\n", ++ resource->res_base_mem); ++ seq_printf(s, "VC-size (bytes): %u\n", ++ resource->res_size); ++ seq_printf(s, "Cache: %s\n", ++ sm_cache_map_vector[resource->res_cached]); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ seq_printf(s, "\n\nTotal allocation count: %d\n\n", alloc_count); ++ ++ return 0; ++} ++#endif ++ ++static int vc_sm_seq_file_show(struct seq_file *s, void *v) ++{ ++ struct SM_PDE_T *sm_pde; ++ ++ sm_pde = (struct SM_PDE_T *)(s->private); ++ ++ if (sm_pde && sm_pde->show) ++ sm_pde->show(s, v); ++ ++ return 0; ++} ++ ++static int vc_sm_single_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vc_sm_seq_file_show, inode->i_private); ++} ++ ++static const struct file_operations vc_sm_debug_fs_fops = { ++ .open = vc_sm_single_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++/* Adds a resource to the private data list which tracks all the allocated ++** data. ++*/ ++static void vmcs_sm_add_resource(struct SM_PRIV_DATA_T *privdata, ++ struct SM_RESOURCE_T *resource) ++{ ++ mutex_lock(&(sm_state->map_lock)); ++ list_add(&resource->resource_list, &privdata->resource_list); ++ list_add(&resource->global_resource_list, &sm_state->resource_list); ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ pr_debug("[%s]: added resource %p (base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_base_mem, ++ resource->res_handle, resource->res_size, resource->res_cached); ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_resource(struct SM_PRIV_DATA_T ++ *private, ++ unsigned int res_guid) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &private->resource_list, resource_list) { ++ if (resource->res_guid != res_guid) ++ continue; ++ ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_first_resource( ++ struct SM_PRIV_DATA_T *private) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &private->resource_list, resource_list) { ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_global_resource(unsigned int ++ res_guid) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &sm_state->resource_list, ++ global_resource_list) { ++ if (resource->res_guid != res_guid) ++ continue; ++ ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Release a previously acquired resource. ++** The resource will be deleted when its refcount reaches 0. ++*/ ++static void vmcs_sm_release_resource(struct SM_RESOURCE_T *resource, int force) ++{ ++ struct SM_PRIV_DATA_T *private = resource->private; ++ struct sm_mmap *map, *map_tmp; ++ struct SM_RESOURCE_T *res_tmp; ++ int ret; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (--resource->ref_count) { ++ if (force) ++ pr_err("[%s]: resource %p in use\n", __func__, resource); ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ return; ++ } ++ ++ /* Time to free the resource. Start by removing it from the list */ ++ list_del(&resource->resource_list); ++ list_del(&resource->global_resource_list); ++ ++ /* Walk the global resource list, find out if the resource is used ++ * somewhere else. In which case we don't want to delete it. ++ */ ++ list_for_each_entry(res_tmp, &sm_state->resource_list, ++ global_resource_list) { ++ if (res_tmp->res_handle == resource->res_handle) { ++ resource->res_handle = 0; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ pr_debug("[%s]: freeing data - guid %x, hdl %x, base address %p\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem); ++ resource->res_stats[FREE]++; ++ ++ /* Make sure the resource we're removing is unmapped first */ ++ if (resource->map_count && !list_empty(&resource->map_list)) { ++ down_write(¤t->mm->mmap_sem); ++ list_for_each_entry_safe(map, map_tmp, &resource->map_list, ++ resource_map_list) { ++ ret = ++ do_munmap(current->mm, map->res_addr, ++ resource->res_size); ++ if (ret) { ++ pr_err("[%s]: could not unmap resource %p\n", ++ __func__, resource); ++ } ++ } ++ up_write(¤t->mm->mmap_sem); ++ } ++ ++ /* Free up the videocore allocated resource. ++ */ ++ if (resource->res_handle) { ++ VC_SM_FREE_T free = { ++ resource->res_handle, resource->res_base_mem ++ }; ++ int status = vc_vchi_sm_free(sm_state->sm_handle, &free, ++ &private->int_trans_id); ++ if (status != 0 && status != -EINTR) { ++ pr_err("[%s]: failed to free memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ resource->res_stats[FREE_FAIL]++; ++ ret = -EPERM; ++ } ++ } ++ ++ /* Free up the shared resource. ++ */ ++ if (resource->res_shared) ++ vmcs_sm_release_resource(resource->res_shared, 0); ++ ++ /* Free up the local resource tracking this allocation. ++ */ ++ vc_sm_resource_deceased(resource, force); ++ kfree(resource); ++} ++ ++/* Dump the map table for the driver. If process is -1, dumps the whole table, ++** if process is a valid pid (non -1) dump only the entries associated with the ++** pid of interest. ++*/ ++static void vmcs_sm_host_walk_map_per_pid(int pid) ++{ ++ struct sm_mmap *map = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (sm_state == NULL) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return; ++ } ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Log all applicable mapping(s). ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (pid == -1 || map->res_pid == pid) { ++ pr_info("[%s]: tgid: %u - vc-hdl: %x, usr-hdl: %x, usr-addr: %lx\n", ++ __func__, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ } ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return; ++} ++ ++/* Dump the allocation table from host side point of view. This only dumps the ++** data allocated for this process/device referenced by the file_data. ++*/ ++static void vmcs_sm_host_walk_alloc(struct SM_PRIV_DATA_T *file_data) ++{ ++ struct SM_RESOURCE_T *resource = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return; ++ } ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ pr_info("[%s]: guid: %x - hdl: %x, vc-mem: %p, size: %u, cache: %u\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return; ++} ++ ++/* Create support for private data tracking. ++*/ ++static struct SM_PRIV_DATA_T *vc_sm_create_priv_data(pid_t id) ++{ ++ char alloc_name[32]; ++ struct SM_PRIV_DATA_T *file_data = NULL; ++ ++ /* Allocate private structure. */ ++ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); ++ ++ if (!file_data) { ++ pr_err("[%s]: cannot allocate file data\n", __func__); ++ goto out; ++ } ++ ++ snprintf(alloc_name, sizeof(alloc_name), "%d", id); ++ ++ INIT_LIST_HEAD(&file_data->resource_list); ++ file_data->pid = id; ++ file_data->dir_pid = debugfs_create_dir(alloc_name, ++ sm_state->dir_alloc); ++#if 0 ++ /* TODO: fix this to support querying statistics per pid */ ++ ++ if (IS_ERR_OR_NULL(file_data->dir_pid)) { ++ file_data->dir_pid = NULL; ++ } else { ++ struct dentry *dir_entry; ++ ++ dir_entry = debugfs_create_file(VC_SM_RESOURCES, S_IRUGO, ++ file_data->dir_pid, file_data, ++ vc_sm_debug_fs_fops); ++ ++ file_data->dir_res.dir_entry = dir_entry; ++ file_data->dir_res.priv_data = file_data; ++ file_data->dir_res.show = &vc_sm_alloc_show; ++ ++ dir_entry = debugfs_create_file(VC_SM_STATS, S_IRUGO, ++ file_data->dir_pid, file_data, ++ vc_sm_debug_fs_fops); ++ ++ file_data->dir_res.dir_entry = dir_entry; ++ file_data->dir_res.priv_data = file_data; ++ file_data->dir_res.show = &vc_sm_statistics_show; ++ } ++ pr_debug("[%s]: private data allocated %p\n", __func__, file_data); ++ ++#endif ++out: ++ return file_data; ++} ++ ++/* Open the device. Creates a private state to help track all allocation ++** associated with this device. ++*/ ++static int vc_sm_open(struct inode *inode, struct file *file) ++{ ++ int ret = 0; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (!sm_state) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ file->private_data = vc_sm_create_priv_data(current->tgid); ++ if (file->private_data == NULL) { ++ pr_err("[%s]: failed to create data tracker\n", __func__); ++ ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++out: ++ return ret; ++} ++ ++/* Close the device. Free up all resources still associated with this device ++** at the time. ++*/ ++static int vc_sm_release(struct inode *inode, struct file *file) ++{ ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (sm_state == NULL || file_data == NULL) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ pr_debug("[%s]: using private data %p\n", __func__, file_data); ++ ++ if (file_data->restart_sys == -EINTR) { ++ VC_SM_ACTION_CLEAN_T action_clean; ++ ++ pr_debug("[%s]: releasing following EINTR on %u (trans_id: %u) (likely due to signal)...\n", ++ __func__, file_data->int_action, ++ file_data->int_trans_id); ++ ++ action_clean.res_action = file_data->int_action; ++ action_clean.action_trans_id = file_data->int_trans_id; ++ ++ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); ++ } ++ ++ while ((resource = vmcs_sm_acquire_first_resource(file_data)) != NULL) { ++ vmcs_sm_release_resource(resource, 0); ++ vmcs_sm_release_resource(resource, 1); ++ } ++ ++ /* Remove the corresponding proc entry. */ ++ debugfs_remove_recursive(file_data->dir_pid); ++ ++ /* Terminate the private data. ++ */ ++ kfree(file_data); ++ ++out: ++ return ret; ++} ++ ++static void vcsm_vma_open(struct vm_area_struct *vma) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ ++ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", ++ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, ++ (int)vma->vm_pgoff); ++ ++ map->ref_count++; ++} ++ ++static void vcsm_vma_close(struct vm_area_struct *vma) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ ++ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", ++ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, ++ (int)vma->vm_pgoff); ++ ++ map->ref_count--; ++ ++ /* Remove from the map table. ++ */ ++ if (map->ref_count == 0) ++ vmcs_sm_remove_map(sm_state, map->resource, map); ++} ++ ++static int vcsm_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ struct SM_RESOURCE_T *resource = map->resource; ++ pgoff_t page_offset; ++ unsigned long pfn; ++ int ret = 0; ++ ++ /* Lock the resource if necessary. ++ */ ++ if (!resource->lock_count) { ++ VC_SM_LOCK_UNLOCK_T lock_unlock; ++ VC_SM_LOCK_RESULT_T lock_result; ++ int status; ++ ++ lock_unlock.res_handle = resource->res_handle; ++ lock_unlock.res_mem = resource->res_base_mem; ++ ++ pr_debug("[%s]: attempt to lock data - hdl %x, base address %p\n", ++ __func__, lock_unlock.res_handle, lock_unlock.res_mem); ++ ++ /* Lock the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_lock(sm_state->sm_handle, ++ &lock_unlock, &lock_result, 0); ++ if ((status != 0) || ++ ((status == 0) && (lock_result.res_mem == NULL))) { ++ pr_err("[%s]: failed to lock memory on videocore (status: %u)\n", ++ __func__, status); ++ resource->res_stats[LOCK_FAIL]++; ++ return VM_FAULT_SIGBUS; ++ } ++ ++ pfn = vcaddr_to_pfn((unsigned long)resource->res_base_mem); ++ outer_inv_range(__pfn_to_phys(pfn), ++ __pfn_to_phys(pfn) + resource->res_size); ++ ++ resource->res_stats[LOCK]++; ++ resource->lock_count++; ++ ++ /* Keep track of the new base memory. ++ */ ++ if ((lock_result.res_mem != NULL) && ++ (lock_result.res_old_mem != NULL) && ++ (lock_result.res_mem != lock_result.res_old_mem)) { ++ resource->res_base_mem = lock_result.res_mem; ++ } ++ } ++ ++ /* We don't use vmf->pgoff since that has the fake offset */ ++ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start); ++ pfn = (uint32_t)resource->res_base_mem & 0x3FFFFFFF; ++ pfn += mm_vc_mem_phys_addr; ++ pfn += page_offset; ++ pfn >>= PAGE_SHIFT; ++ ++ /* Finally, remap it */ ++ ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); ++ ++ switch (ret) { ++ case 0: ++ case -ERESTARTSYS: ++ return VM_FAULT_NOPAGE; ++ case -ENOMEM: ++ case -EAGAIN: ++ return VM_FAULT_OOM; ++ default: ++ return VM_FAULT_SIGBUS; ++ } ++} ++ ++static struct vm_operations_struct vcsm_vm_ops = { ++ .open = vcsm_vma_open, ++ .close = vcsm_vma_close, ++ .fault = vcsm_vma_fault, ++}; ++ ++/* Walks a VMA and clean each valid page from the cache */ ++static void vcsm_vma_cache_clean_page_range(unsigned long addr, ++ unsigned long end) ++{ ++ pgd_t *pgd; ++ pud_t *pud; ++ pmd_t *pmd; ++ pte_t *pte; ++ unsigned long pgd_next, pud_next, pmd_next; ++ ++ if (addr >= end) ++ return; ++ ++ /* Walk PGD */ ++ pgd = pgd_offset(current->mm, addr); ++ do { ++ pgd_next = pgd_addr_end(addr, end); ++ ++ if (pgd_none(*pgd) || pgd_bad(*pgd)) ++ continue; ++ ++ /* Walk PUD */ ++ pud = pud_offset(pgd, addr); ++ do { ++ pud_next = pud_addr_end(addr, pgd_next); ++ if (pud_none(*pud) || pud_bad(*pud)) ++ continue; ++ ++ /* Walk PMD */ ++ pmd = pmd_offset(pud, addr); ++ do { ++ pmd_next = pmd_addr_end(addr, pud_next); ++ if (pmd_none(*pmd) || pmd_bad(*pmd)) ++ continue; ++ ++ /* Walk PTE */ ++ pte = pte_offset_map(pmd, addr); ++ do { ++ if (pte_none(*pte) ++ || !pte_present(*pte)) ++ continue; ++ ++ /* Clean + invalidate */ ++ dmac_flush_range((const void *) addr, ++ (const void *) ++ (addr + PAGE_SIZE)); ++ ++ } while (pte++, addr += ++ PAGE_SIZE, addr != pmd_next); ++ pte_unmap(pte); ++ ++ } while (pmd++, addr = pmd_next, addr != pud_next); ++ ++ } while (pud++, addr = pud_next, addr != pgd_next); ++ } while (pgd++, addr = pgd_next, addr != end); ++} ++ ++/* Map an allocated data into something that the user space. ++*/ ++static int vc_sm_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ int ret = 0; ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource = NULL; ++ struct sm_mmap *map = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return -EPERM; ++ } ++ ++ pr_debug("[%s]: private data %p, guid %x\n", __func__, file_data, ++ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); ++ ++ /* We lookup to make sure that the data we are being asked to mmap is ++ ** something that we allocated. ++ ** ++ ** We use the offset information as the key to tell us which resource ++ ** we are mapping. ++ */ ++ resource = vmcs_sm_acquire_resource(file_data, ++ ((unsigned int)vma->vm_pgoff << ++ PAGE_SHIFT)); ++ if (resource == NULL) { ++ pr_err("[%s]: failed to locate resource for guid %x\n", __func__, ++ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); ++ return -ENOMEM; ++ } ++ ++ pr_debug("[%s]: guid %x, tgid %u, %u, %u\n", ++ __func__, resource->res_guid, current->tgid, resource->pid, ++ file_data->pid); ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ /* Verify that what we are asked to mmap is proper. ++ */ ++ if (resource->res_size != (unsigned int)(vma->vm_end - vma->vm_start)) { ++ pr_err("[%s]: size inconsistency (resource: %u - mmap: %u)\n", ++ __func__, ++ resource->res_size, ++ (unsigned int)(vma->vm_end - vma->vm_start)); ++ ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Keep track of the tuple in the global resource list such that one ++ * can do a mapping lookup for address/memory handle. ++ */ ++ map = kzalloc(sizeof(*map), GFP_KERNEL); ++ if (map == NULL) { ++ pr_err("[%s]: failed to allocate global tracking resource\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ map->res_pid = current->tgid; ++ map->res_vc_hdl = resource->res_handle; ++ map->res_usr_hdl = resource->res_guid; ++ map->res_addr = (long unsigned int)vma->vm_start; ++ map->resource = resource; ++ map->vma = vma; ++ vmcs_sm_add_map(sm_state, resource, map); ++ ++ /* We are not actually mapping the pages, we just provide a fault ++ ** handler to allow pages to be mapped when accessed ++ */ ++ vma->vm_flags |= ++ VM_IO | VM_PFNMAP | VM_DONTCOPY | VM_DONTEXPAND; ++ vma->vm_ops = &vcsm_vm_ops; ++ vma->vm_private_data = map; ++ ++ /* vm_pgoff is the first PFN of the mapped memory */ ++ vma->vm_pgoff = (unsigned long)resource->res_base_mem & 0x3FFFFFFF; ++ vma->vm_pgoff += mm_vc_mem_phys_addr; ++ vma->vm_pgoff >>= PAGE_SHIFT; ++ ++ if ((resource->res_cached == VMCS_SM_CACHE_NONE) || ++ (resource->res_cached == VMCS_SM_CACHE_VC)) { ++ /* Allocated non host cached memory, honour it. ++ */ ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ } ++ ++ pr_debug("[%s]: resource %p (guid %x) - cnt %u, base address %p, handle %x, size %u (%u), cache %u\n", ++ __func__, ++ resource, resource->res_guid, resource->lock_count, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, (unsigned int)(vma->vm_end - vma->vm_start), ++ resource->res_cached); ++ ++ pr_debug("[%s]: resource %p (base address %p, handle %x) - map-count %d, usr-addr %x\n", ++ __func__, resource, resource->res_base_mem, ++ resource->res_handle, resource->map_count, ++ (unsigned int)vma->vm_start); ++ ++ vcsm_vma_open(vma); ++ resource->res_stats[MAP]++; ++ vmcs_sm_release_resource(resource, 0); ++ return 0; ++ ++error: ++ resource->res_stats[MAP_FAIL]++; ++ vmcs_sm_release_resource(resource, 0); ++ return ret; ++} ++ ++/* Allocate a shared memory handle and block. ++*/ ++int vc_sm_ioctl_alloc(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_alloc *ioparam) ++{ ++ int ret = 0; ++ int status; ++ struct SM_RESOURCE_T *resource; ++ VC_SM_ALLOC_T alloc = { 0 }; ++ VC_SM_ALLOC_RESULT_T result = { 0 }; ++ ++ /* Setup our allocation parameters */ ++ alloc.type = ((ioparam->cached == VMCS_SM_CACHE_VC) ++ || (ioparam->cached == ++ VMCS_SM_CACHE_BOTH)) ? VC_SM_ALLOC_CACHED : ++ VC_SM_ALLOC_NON_CACHED; ++ alloc.base_unit = ioparam->size; ++ alloc.num_unit = ioparam->num; ++ alloc.allocator = current->tgid; ++ /* Align to kernel page size */ ++ alloc.alignement = 4096; ++ /* Align the size to the kernel page size */ ++ alloc.base_unit = ++ (alloc.base_unit + alloc.alignement - 1) & ~(alloc.alignement - 1); ++ if (*ioparam->name) { ++ memcpy(alloc.name, ioparam->name, sizeof(alloc.name) - 1); ++ } else { ++ memcpy(alloc.name, VMCS_SM_RESOURCE_NAME_DEFAULT, ++ sizeof(VMCS_SM_RESOURCE_NAME_DEFAULT)); ++ } ++ ++ pr_debug("[%s]: attempt to allocate \"%s\" data - type %u, base %u (%u), num %u, alignement %u\n", ++ __func__, alloc.name, alloc.type, ioparam->size, ++ alloc.base_unit, alloc.num_unit, alloc.alignement); ++ ++ /* Allocate local resource to track this allocation. ++ */ ++ resource = kzalloc(sizeof(*resource), GFP_KERNEL); ++ if (!resource) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ INIT_LIST_HEAD(&resource->map_list); ++ resource->ref_count++; ++ resource->pid = current->tgid; ++ ++ /* Allocate the videocore resource. ++ */ ++ status = vc_vchi_sm_alloc(sm_state->sm_handle, &alloc, &result, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting allocate memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_ALLOC; ++ goto error; ++ } else if (status != 0 || (status == 0 && result.res_mem == NULL)) { ++ pr_err("[%s]: failed to allocate memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -ENOMEM; ++ resource->res_stats[ALLOC_FAIL]++; ++ goto error; ++ } ++ ++ /* Keep track of the resource we created. ++ */ ++ resource->private = private; ++ resource->res_handle = result.res_handle; ++ resource->res_base_mem = result.res_mem; ++ resource->res_size = alloc.base_unit * alloc.num_unit; ++ resource->res_cached = ioparam->cached; ++ ++ /* Kernel/user GUID. This global identifier is used for mmap'ing the ++ * allocated region from user space, it is passed as the mmap'ing ++ * offset, we use it to 'hide' the videocore handle/address. ++ */ ++ mutex_lock(&sm_state->lock); ++ resource->res_guid = ++sm_state->guid; ++ mutex_unlock(&sm_state->lock); ++ resource->res_guid <<= PAGE_SHIFT; ++ ++ vmcs_sm_add_resource(private, resource); ++ ++ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ ++ /* We're done */ ++ resource->res_stats[ALLOC]++; ++ ioparam->handle = resource->res_guid; ++ return 0; ++ ++error: ++ pr_err("[%s]: failed to allocate \"%s\" data (%i) - type %u, base %u (%u), num %u, alignment %u\n", ++ __func__, alloc.name, ret, alloc.type, ioparam->size, ++ alloc.base_unit, alloc.num_unit, alloc.alignement); ++ if (resource != NULL) { ++ vc_sm_resource_deceased(resource, 1); ++ kfree(resource); ++ } ++ return ret; ++} ++ ++/* Share an allocate memory handle and block. ++*/ ++int vc_sm_ioctl_alloc_share(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_alloc_share *ioparam) ++{ ++ struct SM_RESOURCE_T *resource, *shared_resource; ++ int ret = 0; ++ ++ pr_debug("[%s]: attempt to share resource %u\n", __func__, ++ ioparam->handle); ++ ++ shared_resource = vmcs_sm_acquire_global_resource(ioparam->handle); ++ if (shared_resource == NULL) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ /* Allocate local resource to track this allocation. ++ */ ++ resource = kzalloc(sizeof(*resource), GFP_KERNEL); ++ if (resource == NULL) { ++ pr_err("[%s]: failed to allocate local tracking resource\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } ++ INIT_LIST_HEAD(&resource->map_list); ++ resource->ref_count++; ++ resource->pid = current->tgid; ++ ++ /* Keep track of the resource we created. ++ */ ++ resource->private = private; ++ resource->res_handle = shared_resource->res_handle; ++ resource->res_base_mem = shared_resource->res_base_mem; ++ resource->res_size = shared_resource->res_size; ++ resource->res_cached = shared_resource->res_cached; ++ resource->res_shared = shared_resource; ++ ++ mutex_lock(&sm_state->lock); ++ resource->res_guid = ++sm_state->guid; ++ mutex_unlock(&sm_state->lock); ++ resource->res_guid <<= PAGE_SHIFT; ++ ++ vmcs_sm_add_resource(private, resource); ++ ++ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ ++ /* We're done */ ++ resource->res_stats[ALLOC]++; ++ ioparam->handle = resource->res_guid; ++ ioparam->size = resource->res_size; ++ return 0; ++ ++error: ++ pr_err("[%s]: failed to share %u\n", __func__, ioparam->handle); ++ if (shared_resource != NULL) ++ vmcs_sm_release_resource(shared_resource, 0); ++ ++ return ret; ++} ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_free(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_free *ioparam) ++{ ++ struct SM_RESOURCE_T *resource = ++ vmcs_sm_acquire_resource(private, ioparam->handle); ++ ++ if (resource == NULL) { ++ pr_err("[%s]: resource for guid %u does not exist\n", __func__, ++ ioparam->handle); ++ return -EINVAL; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ vmcs_sm_release_resource(resource, 0); ++ return -EPERM; ++ } ++ ++ vmcs_sm_release_resource(resource, 0); ++ vmcs_sm_release_resource(resource, 0); ++ return 0; ++} ++ ++/* Resize a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_resize(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_resize *ioparam) ++{ ++ int ret = 0; ++ int status; ++ VC_SM_RESIZE_T resize; ++ struct SM_RESOURCE_T *resource; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (!resource) { ++ pr_err("[%s]: failed resource - guid %x\n", ++ __func__, ioparam->handle); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ /* If the resource is locked, its reference count will be not NULL, ++ ** in which case we will not be allowed to resize it anyways, so ++ ** reject the attempt here. ++ */ ++ if (resource->lock_count != 0) { ++ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", ++ __func__, ioparam->handle, resource->lock_count); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", __func__, ++ current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ if (resource->map_count != 0) { ++ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", ++ __func__, ioparam->handle, resource->map_count); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ resize.res_handle = resource->res_handle; ++ resize.res_mem = resource->res_base_mem; ++ resize.res_new_size = ioparam->new_size; ++ ++ pr_debug("[%s]: attempt to resize data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, resize.res_handle, resize.res_mem); ++ ++ /* Resize the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_resize(sm_state->sm_handle, &resize, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting resize memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_RESIZE; ++ goto error; ++ } else if (status != 0) { ++ pr_err("[%s]: failed to resize memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ pr_debug("[%s]: success to resize data - hdl %x, size %d -> %d\n", ++ __func__, resize.res_handle, resource->res_size, ++ resize.res_new_size); ++ ++ /* Successfully resized, save the information and inform the user. ++ */ ++ ioparam->old_size = resource->res_size; ++ resource->res_size = resize.res_new_size; ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Lock a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_lock(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_lock_unlock *ioparam, ++ int change_cache, enum vmcs_sm_cache_e cache_type, ++ unsigned int vc_addr) ++{ ++ int status; ++ VC_SM_LOCK_UNLOCK_T lock; ++ VC_SM_LOCK_RESULT_T result; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ struct sm_mmap *map, *map_tmp; ++ long unsigned int phys_addr; ++ ++ map = NULL; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (resource == NULL) { ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", __func__, ++ current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ lock.res_handle = resource->res_handle; ++ lock.res_mem = resource->res_base_mem; ++ ++ /* Take the lock and get the address to be mapped. ++ */ ++ if (vc_addr == 0) { ++ pr_debug("[%s]: attempt to lock data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, lock.res_handle, ++ lock.res_mem); ++ ++ /* Lock the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_lock(sm_state->sm_handle, &lock, &result, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting lock memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_LOCK; ++ goto error; ++ } else if (status != 0 || ++ (status == 0 && result.res_mem == NULL)) { ++ pr_err("[%s]: failed to lock memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -EPERM; ++ resource->res_stats[LOCK_FAIL]++; ++ goto error; ++ } ++ ++ pr_debug("[%s]: succeed to lock data - hdl %x, base address %p (%p), ref-cnt %d\n", ++ __func__, lock.res_handle, result.res_mem, ++ lock.res_mem, resource->lock_count); ++ } ++ /* Lock assumed taken already, address to be mapped is known. ++ */ ++ else ++ resource->res_base_mem = (void *)vc_addr; ++ ++ resource->res_stats[LOCK]++; ++ resource->lock_count++; ++ ++ /* Keep track of the new base memory allocation if it has changed. ++ */ ++ if ((vc_addr == 0) && ++ (result.res_mem != NULL) && ++ (result.res_old_mem != NULL) && ++ (result.res_mem != result.res_old_mem)) { ++ resource->res_base_mem = result.res_mem; ++ ++ /* Kernel allocated resources. ++ */ ++ if (resource->pid == 0) { ++ if (!list_empty(&resource->map_list)) { ++ list_for_each_entry_safe(map, map_tmp, ++ &resource->map_list, ++ resource_map_list) { ++ if (map->res_addr) { ++ iounmap((void *)map->res_addr); ++ map->res_addr = 0; ++ ++ vmcs_sm_remove_map(sm_state, ++ map->resource, ++ map); ++ break; ++ } ++ } ++ } ++ } ++ } ++ ++ if (change_cache) ++ resource->res_cached = cache_type; ++ ++ if (resource->map_count) { ++ ioparam->addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle( ++ current->tgid, ioparam->handle); ++ ++ pr_debug("[%s] map_count %d private->pid %d current->tgid %d hnd %x addr %u\n", ++ __func__, resource->map_count, private->pid, ++ current->tgid, ioparam->handle, ioparam->addr); ++ } else { ++ /* Kernel allocated resources. ++ */ ++ if (resource->pid == 0) { ++ pr_debug("[%s]: attempt mapping kernel resource - guid %x, hdl %x\n", ++ __func__, ioparam->handle, lock.res_handle); ++ ++ ioparam->addr = 0; ++ ++ map = kzalloc(sizeof(*map), GFP_KERNEL); ++ if (map == NULL) { ++ pr_err("[%s]: failed allocating tracker\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } else { ++ phys_addr = (uint32_t)resource->res_base_mem & ++ 0x3FFFFFFF; ++ phys_addr += mm_vc_mem_phys_addr; ++ if (resource->res_cached ++ == VMCS_SM_CACHE_HOST) { ++ ioparam->addr = (long unsigned int) ++ /* TODO - make cached work */ ++ ioremap_nocache(phys_addr, ++ resource->res_size); ++ ++ pr_debug("[%s]: mapping kernel - guid %x, hdl %x - cached mapping %u\n", ++ __func__, ioparam->handle, ++ lock.res_handle, ioparam->addr); ++ } else { ++ ioparam->addr = (long unsigned int) ++ ioremap_nocache(phys_addr, ++ resource->res_size); ++ ++ pr_debug("[%s]: mapping kernel- guid %x, hdl %x - non cached mapping %u\n", ++ __func__, ioparam->handle, ++ lock.res_handle, ioparam->addr); ++ } ++ ++ map->res_pid = 0; ++ map->res_vc_hdl = resource->res_handle; ++ map->res_usr_hdl = resource->res_guid; ++ map->res_addr = ioparam->addr; ++ map->resource = resource; ++ map->vma = NULL; ++ ++ vmcs_sm_add_map(sm_state, resource, map); ++ } ++ } else ++ ioparam->addr = 0; ++ } ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Unlock a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_unlock(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_lock_unlock *ioparam, ++ int flush, int wait_reply, int no_vc_unlock) ++{ ++ int status; ++ VC_SM_LOCK_UNLOCK_T unlock; ++ struct sm_mmap *map, *map_tmp; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ map = NULL; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (resource == NULL) { ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ unlock.res_handle = resource->res_handle; ++ unlock.res_mem = resource->res_base_mem; ++ ++ pr_debug("[%s]: attempt to unlock data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, unlock.res_handle, unlock.res_mem); ++ ++ /* User space allocated resources. ++ */ ++ if (resource->pid) { ++ /* Flush if requested */ ++ if (resource->res_cached && flush) { ++ dma_addr_t phys_addr = 0; ++ resource->res_stats[FLUSH]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t)resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ list_for_each_entry(map, &resource->map_list, ++ resource_map_list) { ++ if (map->vma) { ++ unsigned long start; ++ unsigned long end; ++ start = map->vma->vm_start; ++ end = map->vma->vm_end; ++ ++ vcsm_vma_cache_clean_page_range( ++ start, end); ++ } ++ } ++ up_read(¤t->mm->mmap_sem); ++ ++ /* L2 cache flush */ ++ outer_clean_range(phys_addr, ++ phys_addr + ++ (size_t) resource->res_size); ++ } ++ ++ /* We need to zap all the vmas associated with this resource */ ++ if (resource->lock_count == 1) { ++ down_read(¤t->mm->mmap_sem); ++ list_for_each_entry(map, &resource->map_list, ++ resource_map_list) { ++ if (map->vma) { ++ zap_vma_ptes(map->vma, ++ map->vma->vm_start, ++ map->vma->vm_end - ++ map->vma->vm_start); ++ } ++ } ++ up_read(¤t->mm->mmap_sem); ++ } ++ } ++ /* Kernel allocated resources. */ ++ else { ++ /* Global + Taken in this context */ ++ if (resource->ref_count == 2) { ++ if (!list_empty(&resource->map_list)) { ++ list_for_each_entry_safe(map, map_tmp, ++ &resource->map_list, ++ resource_map_list) { ++ if (map->res_addr) { ++ if (flush && ++ (resource->res_cached == ++ VMCS_SM_CACHE_HOST)) { ++ long unsigned int ++ phys_addr; ++ phys_addr = (uint32_t) ++ resource->res_base_mem & 0x3FFFFFFF; ++ phys_addr += ++ mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ dmac_flush_range((const ++ void ++ *) ++ map->res_addr, (const void *) ++ (map->res_addr + resource->res_size)); ++ ++ /* L2 cache flush */ ++ outer_clean_range ++ (phys_addr, ++ phys_addr + ++ (size_t) ++ resource->res_size); ++ } ++ ++ iounmap((void *)map->res_addr); ++ map->res_addr = 0; ++ ++ vmcs_sm_remove_map(sm_state, ++ map->resource, ++ map); ++ break; ++ } ++ } ++ } ++ } ++ } ++ ++ if (resource->lock_count) { ++ /* Bypass the videocore unlock. ++ */ ++ if (no_vc_unlock) ++ status = 0; ++ /* Unlock the videocore allocated resource. ++ */ ++ else { ++ status = ++ vc_vchi_sm_unlock(sm_state->sm_handle, &unlock, ++ &private->int_trans_id, ++ wait_reply); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting unlock memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ++ ret = -ERESTARTSYS; ++ resource->res_stats[UNLOCK]--; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_UNLOCK; ++ goto error; ++ } else if (status != 0) { ++ pr_err("[%s]: failed to unlock vc mem (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ++ ret = -EPERM; ++ resource->res_stats[UNLOCK_FAIL]++; ++ goto error; ++ } ++ } ++ ++ resource->res_stats[UNLOCK]++; ++ resource->lock_count--; ++ } ++ ++ pr_debug("[%s]: success to unlock data - hdl %x, base address %p, ref-cnt %d\n", ++ __func__, unlock.res_handle, unlock.res_mem, ++ resource->lock_count); ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Handle control from host. */ ++static long vc_sm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int ret = 0; ++ unsigned int cmdnr = _IOC_NR(cmd); ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource = NULL; ++ ++ /* Validate we can work with this device. */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, ++ current->tgid, file_data->pid); ++ ++ /* Action is a re-post of a previously interrupted action? */ ++ if (file_data->restart_sys == -EINTR) { ++ VC_SM_ACTION_CLEAN_T action_clean; ++ ++ pr_debug("[%s]: clean up of action %u (trans_id: %u) following EINTR\n", ++ __func__, file_data->int_action, ++ file_data->int_trans_id); ++ ++ action_clean.res_action = file_data->int_action; ++ action_clean.action_trans_id = file_data->int_trans_id; ++ ++ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); ++ ++ file_data->restart_sys = 0; ++ } ++ ++ /* Now process the command. ++ */ ++ switch (cmdnr) { ++ /* New memory allocation. ++ */ ++ case VMCS_SM_CMD_ALLOC: ++ { ++ struct vmcs_sm_ioctl_alloc ioparam; ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_alloc(file_data, &ioparam); ++ if (!ret && ++ (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0)) { ++ struct vmcs_sm_ioctl_free freeparam = { ++ ioparam.handle ++ }; ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ vc_sm_ioctl_free(file_data, &freeparam); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Share existing memory allocation. ++ */ ++ case VMCS_SM_CMD_ALLOC_SHARE: ++ { ++ struct vmcs_sm_ioctl_alloc_share ioparam; ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_alloc_share(file_data, &ioparam); ++ ++ /* Copy result back to user. ++ */ ++ if (!ret ++ && copy_to_user((void *)arg, &ioparam, ++ sizeof(ioparam)) != 0) { ++ struct vmcs_sm_ioctl_free freeparam = { ++ ioparam.handle ++ }; ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ vc_sm_ioctl_free(file_data, &freeparam); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Lock (attempt to) *and* register a cache behavior change. ++ */ ++ case VMCS_SM_CMD_LOCK_CACHE: ++ { ++ struct vmcs_sm_ioctl_lock_cache ioparam; ++ struct vmcs_sm_ioctl_lock_unlock lock; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ lock.handle = ioparam.handle; ++ ret = ++ vc_sm_ioctl_lock(file_data, &lock, 1, ++ ioparam.cached, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Lock (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_LOCK: ++ { ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_lock(file_data, &ioparam, 0, 0, 0); ++ ++ /* Copy result back to user. ++ */ ++ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) ++ != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Unlock (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_UNLOCK: ++ { ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_unlock(file_data, &ioparam, 0, 1, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Resize (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_RESIZE: ++ { ++ struct vmcs_sm_ioctl_resize ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_resize(file_data, &ioparam); ++ ++ /* Copy result back to user. ++ */ ++ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) ++ != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Terminate existing memory allocation. ++ */ ++ case VMCS_SM_CMD_FREE: ++ { ++ struct vmcs_sm_ioctl_free ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_free(file_data, &ioparam); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Walk allocation on videocore, information shows up in the ++ ** videocore log. ++ */ ++ case VMCS_SM_CMD_VC_WALK_ALLOC: ++ { ++ pr_debug("[%s]: invoking walk alloc\n", __func__); ++ ++ if (vc_vchi_sm_walk_alloc(sm_state->sm_handle) != 0) ++ pr_err("[%s]: failed to walk-alloc on videocore\n", ++ __func__); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++/* Walk mapping table on host, information shows up in the ++ ** kernel log. ++ */ ++ case VMCS_SM_CMD_HOST_WALK_MAP: ++ { ++ /* Use pid of -1 to tell to walk the whole map. */ ++ vmcs_sm_host_walk_map_per_pid(-1); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Walk mapping table per process on host. */ ++ case VMCS_SM_CMD_HOST_WALK_PID_ALLOC: ++ { ++ struct vmcs_sm_ioctl_walk ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ vmcs_sm_host_walk_alloc(file_data); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Walk allocation per process on host. */ ++ case VMCS_SM_CMD_HOST_WALK_PID_MAP: ++ { ++ struct vmcs_sm_ioctl_walk ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ vmcs_sm_host_walk_map_per_pid(ioparam.pid); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Gets the size of the memory associated with a user handle. */ ++ case VMCS_SM_CMD_SIZE_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_size ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.size = resource->res_size; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.size = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Verify we are dealing with a valid resource. */ ++ case VMCS_SM_CMD_CHK_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_chk ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource == NULL) ++ ret = -EINVAL; ++ /* If the resource is cacheable, return additional ++ * information that may be needed to flush the cache. ++ */ ++ else if ((resource->res_cached == VMCS_SM_CACHE_HOST) || ++ (resource->res_cached == VMCS_SM_CACHE_BOTH)) { ++ ioparam.addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle ++ (current->tgid, ioparam.handle); ++ ioparam.size = resource->res_size; ++ ioparam.cache = resource->res_cached; ++ } else { ++ ioparam.addr = 0; ++ ioparam.size = 0; ++ ioparam.cache = resource->res_cached; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a user handle given the process and the virtual address. ++ */ ++ case VMCS_SM_CMD_MAPPED_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ioparam.handle = ++ vmcs_sm_usr_handle_from_pid_and_address( ++ ioparam.pid, ioparam.addr); ++ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if ((resource != NULL) ++ && ((resource->res_cached == VMCS_SM_CACHE_HOST) ++ || (resource->res_cached == ++ VMCS_SM_CACHE_BOTH))) { ++ ioparam.size = resource->res_size; ++ } else { ++ ioparam.size = 0; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a videocore handle given process and virtual address. ++ */ ++ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ioparam.handle = vmcs_sm_vc_handle_from_pid_and_address( ++ ioparam.pid, ioparam.addr); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Maps a videocore handle given process and user handle. */ ++ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.handle = resource->res_handle; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.handle = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a videocore address given process and videocore handle. ++ */ ++ case VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.addr = ++ (unsigned int)resource->res_base_mem; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.addr = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Maps a user address given process and vc handle. ++ */ ++ case VMCS_SM_CMD_MAPPED_USR_ADDRESS: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* ++ * Return the address information from the mapping, ++ * 0 (ie NULL) if it cannot locate the actual mapping. ++ */ ++ ioparam.addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle ++ (ioparam.pid, ioparam.handle); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Flush the cache for a given mapping. */ ++ case VMCS_SM_CMD_FLUSH: ++ { ++ struct vmcs_sm_ioctl_cache ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ ++ if ((resource != NULL) && resource->res_cached) { ++ dma_addr_t phys_addr = 0; ++ ++ resource->res_stats[FLUSH]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t) ++ resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range((unsigned long) ++ ioparam.addr, ++ (unsigned long) ++ ioparam.addr + ++ ioparam.size); ++ up_read(¤t->mm->mmap_sem); ++ ++ /* L2 cache flush */ ++ outer_clean_range(phys_addr, ++ phys_addr + ++ (size_t) ioparam.size); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Invalidate the cache for a given mapping. */ ++ case VMCS_SM_CMD_INVALID: ++ { ++ struct vmcs_sm_ioctl_cache ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. ++ */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ ++ if ((resource != NULL) && resource->res_cached) { ++ dma_addr_t phys_addr = 0; ++ ++ resource->res_stats[INVALID]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t) ++ resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L2 cache invalidate */ ++ outer_inv_range(phys_addr, ++ phys_addr + ++ (size_t) ioparam.size); ++ ++ /* L1 cache invalidate */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range((unsigned long) ++ ioparam.addr, ++ (unsigned long) ++ ioparam.addr + ++ ioparam.size); ++ up_read(¤t->mm->mmap_sem); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Flush/Invalidate the cache for a given mapping. */ ++ case VMCS_SM_CMD_CLEAN_INVALID: ++ { ++ int i; ++ struct vmcs_sm_ioctl_clean_invalid ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ for (i=0; ires_cached) { ++ unsigned long base = ioparam.s[i].addr & ~(PAGE_SIZE-1); ++ unsigned long end = (ioparam.s[i].addr + ioparam.s[i].size + PAGE_SIZE-1) & ~(PAGE_SIZE-1); ++ resource->res_stats[ioparam.s[i].cmd == 1 ? INVALID:FLUSH]++; ++ ++ /* L1/L2 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range(base, end); ++ up_read(¤t->mm->mmap_sem); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ } ++ break; ++ } ++ } ++ } ++ break; ++ ++ default: ++ { ++ ret = -EINVAL; ++ goto out; ++ } ++ break; ++ } ++ ++out: ++ return ret; ++} ++ ++/* Device operations that we managed in this driver. ++*/ ++static const struct file_operations vmcs_sm_ops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = vc_sm_ioctl, ++ .open = vc_sm_open, ++ .release = vc_sm_release, ++ .mmap = vc_sm_mmap, ++}; ++ ++/* Creation of device. ++*/ ++static int vc_sm_create_sharedmemory(void) ++{ ++ int ret; ++ ++ if (sm_state == NULL) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ /* Create a device class for creating dev nodes. ++ */ ++ sm_state->sm_class = class_create(THIS_MODULE, "vc-sm"); ++ if (IS_ERR(sm_state->sm_class)) { ++ pr_err("[%s]: unable to create device class\n", __func__); ++ ret = PTR_ERR(sm_state->sm_class); ++ goto out; ++ } ++ ++ /* Create a character driver. ++ */ ++ ret = alloc_chrdev_region(&sm_state->sm_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (ret != 0) { ++ pr_err("[%s]: unable to allocate device number\n", __func__); ++ goto out_dev_class_destroy; ++ } ++ ++ cdev_init(&sm_state->sm_cdev, &vmcs_sm_ops); ++ ret = cdev_add(&sm_state->sm_cdev, sm_state->sm_devid, 1); ++ if (ret != 0) { ++ pr_err("[%s]: unable to register device\n", __func__); ++ goto out_chrdev_unreg; ++ } ++ ++ /* Create a device node. ++ */ ++ sm_state->sm_dev = device_create(sm_state->sm_class, ++ NULL, ++ MKDEV(MAJOR(sm_state->sm_devid), ++ DEVICE_MINOR), NULL, ++ DEVICE_NAME); ++ if (IS_ERR(sm_state->sm_dev)) { ++ pr_err("[%s]: unable to create device node\n", __func__); ++ ret = PTR_ERR(sm_state->sm_dev); ++ goto out_chrdev_del; ++ } ++ ++ goto out; ++ ++out_chrdev_del: ++ cdev_del(&sm_state->sm_cdev); ++out_chrdev_unreg: ++ unregister_chrdev_region(sm_state->sm_devid, 1); ++out_dev_class_destroy: ++ class_destroy(sm_state->sm_class); ++ sm_state->sm_class = NULL; ++out: ++ return ret; ++} ++ ++/* Termination of the device. ++*/ ++static int vc_sm_remove_sharedmemory(void) ++{ ++ int ret; ++ ++ if (sm_state == NULL) { ++ /* Nothing to do. ++ */ ++ ret = 0; ++ goto out; ++ } ++ ++ /* Remove the sharedmemory character driver. ++ */ ++ cdev_del(&sm_state->sm_cdev); ++ ++ /* Unregister region. ++ */ ++ unregister_chrdev_region(sm_state->sm_devid, 1); ++ ++ ret = 0; ++ goto out; ++ ++out: ++ return ret; ++} ++ ++/* Videocore connected. */ ++static void vc_sm_connected_init(void) ++{ ++ int ret; ++ VCHI_INSTANCE_T vchi_instance; ++ VCHI_CONNECTION_T *vchi_connection = NULL; ++ ++ pr_info("[%s]: start\n", __func__); ++ ++ /* Allocate memory for the state structure. ++ */ ++ sm_state = kzalloc(sizeof(struct SM_STATE_T), GFP_KERNEL); ++ if (sm_state == NULL) { ++ pr_err("[%s]: failed to allocate memory\n", __func__); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ mutex_init(&sm_state->lock); ++ mutex_init(&sm_state->map_lock); ++ ++ /* Initialize and create a VCHI connection for the shared memory service ++ ** running on videocore. ++ */ ++ ret = vchi_initialise(&vchi_instance); ++ if (ret != 0) { ++ pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ ret = vchi_connect(NULL, 0, vchi_instance); ++ if (ret != 0) { ++ pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ /* Initialize an instance of the shared memory service. */ ++ sm_state->sm_handle = ++ vc_vchi_sm_init(vchi_instance, &vchi_connection, 1); ++ if (sm_state->sm_handle == NULL) { ++ pr_err("[%s]: failed to initialize shared memory service\n", ++ __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ /* Create a debug fs directory entry (root). */ ++ sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); ++ if (!sm_state->dir_root) { ++ pr_err("[%s]: failed to create \'%s\' directory entry\n", ++ __func__, VC_SM_DIR_ROOT_NAME); ++ ++ ret = -EPERM; ++ goto err_stop_sm_service; ++ } ++ ++ sm_state->dir_state.show = &vc_sm_global_state_show; ++ sm_state->dir_state.dir_entry = debugfs_create_file(VC_SM_STATE, ++ S_IRUGO, sm_state->dir_root, &sm_state->dir_state, ++ &vc_sm_debug_fs_fops); ++ ++ sm_state->dir_stats.show = &vc_sm_global_statistics_show; ++ sm_state->dir_stats.dir_entry = debugfs_create_file(VC_SM_STATS, ++ S_IRUGO, sm_state->dir_root, &sm_state->dir_stats, ++ &vc_sm_debug_fs_fops); ++ ++ /* Create the proc entry children. */ ++ sm_state->dir_alloc = debugfs_create_dir(VC_SM_DIR_ALLOC_NAME, ++ sm_state->dir_root); ++ ++ /* Create a shared memory device. */ ++ ret = vc_sm_create_sharedmemory(); ++ if (ret != 0) { ++ pr_err("[%s]: failed to create shared memory device\n", ++ __func__); ++ goto err_remove_debugfs; ++ } ++ ++ INIT_LIST_HEAD(&sm_state->map_list); ++ INIT_LIST_HEAD(&sm_state->resource_list); ++ ++ sm_state->data_knl = vc_sm_create_priv_data(0); ++ if (sm_state->data_knl == NULL) { ++ pr_err("[%s]: failed to create kernel private data tracker\n", ++ __func__); ++ goto err_remove_shared_memory; ++ } ++ ++ /* Done! ++ */ ++ sm_inited = 1; ++ goto out; ++ ++err_remove_shared_memory: ++ vc_sm_remove_sharedmemory(); ++err_remove_debugfs: ++ debugfs_remove_recursive(sm_state->dir_root); ++err_stop_sm_service: ++ vc_vchi_sm_stop(&sm_state->sm_handle); ++err_free_mem: ++ kfree(sm_state); ++out: ++ pr_info("[%s]: end - returning %d\n", __func__, ret); ++} ++ ++/* Driver loading. */ ++static int __init vc_sm_init(void) ++{ ++ pr_info("vc-sm: Videocore shared memory driver\n"); ++ vchiq_add_connected_callback(vc_sm_connected_init); ++ return 0; ++} ++ ++/* Driver unloading. */ ++static void __exit vc_sm_exit(void) ++{ ++ pr_debug("[%s]: start\n", __func__); ++ if (sm_inited) { ++ /* Remove shared memory device. ++ */ ++ vc_sm_remove_sharedmemory(); ++ ++ /* Remove all proc entries. ++ */ ++ debugfs_remove_recursive(sm_state->dir_root); ++ ++ /* Stop the videocore shared memory service. ++ */ ++ vc_vchi_sm_stop(&sm_state->sm_handle); ++ ++ /* Free the memory for the state structure. ++ */ ++ mutex_destroy(&(sm_state->map_lock)); ++ kfree(sm_state); ++ } ++ ++ pr_debug("[%s]: end\n", __func__); ++} ++ ++#if defined(__KERNEL__) ++/* Allocate a shared memory handle and block. */ ++int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle) ++{ ++ struct vmcs_sm_ioctl_alloc ioparam = { 0 }; ++ int ret; ++ struct SM_RESOURCE_T *resource; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || alloc == NULL || handle == NULL) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ ioparam.size = alloc->base_unit; ++ ioparam.num = alloc->num_unit; ++ ioparam.cached = ++ alloc->type == VC_SM_ALLOC_CACHED ? VMCS_SM_CACHE_VC : 0; ++ ++ ret = vc_sm_ioctl_alloc(sm_state->data_knl, &ioparam); ++ ++ if (ret == 0) { ++ resource = ++ vmcs_sm_acquire_resource(sm_state->data_knl, ++ ioparam.handle); ++ if (resource) { ++ resource->pid = 0; ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Assign valid handle at this time. ++ */ ++ *handle = ioparam.handle; ++ } else { ++ ret = -ENOMEM; ++ } ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_alloc); ++ ++/* Get an internal resource handle mapped from the external one. ++*/ ++int vc_sm_int_handle(int handle) ++{ ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return 0; ++ } ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(sm_state->data_knl, handle); ++ if (resource) { ++ ret = resource->res_handle; ++ vmcs_sm_release_resource(resource, 0); ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_int_handle); ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++int vc_sm_free(int handle) ++{ ++ struct vmcs_sm_ioctl_free ioparam = { handle }; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ return vc_sm_ioctl_free(sm_state->data_knl, &ioparam); ++} ++EXPORT_SYMBOL_GPL(vc_sm_free); ++ ++/* Lock a memory handle for use by kernel. ++*/ ++int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ int ret; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0 || data == NULL) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ *data = 0; ++ ++ ioparam.handle = handle; ++ ret = vc_sm_ioctl_lock(sm_state->data_knl, ++ &ioparam, ++ 1, ++ ((mode == ++ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : ++ VMCS_SM_CACHE_NONE), 0); ++ ++ *data = ioparam.addr; ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_lock); ++ ++/* Unlock a memory handle in use by kernel. ++*/ ++int vc_sm_unlock(int handle, int flush, int no_vc_unlock) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ ioparam.handle = handle; ++ return vc_sm_ioctl_unlock(sm_state->data_knl, ++ &ioparam, flush, 0, no_vc_unlock); ++} ++EXPORT_SYMBOL_GPL(vc_sm_unlock); ++ ++/* Map a shared memory region for use by kernel. ++*/ ++int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ int ret; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0 || data == NULL || sm_addr == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ *data = 0; ++ ++ ioparam.handle = handle; ++ ret = vc_sm_ioctl_lock(sm_state->data_knl, ++ &ioparam, ++ 1, ++ ((mode == ++ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : ++ VMCS_SM_CACHE_NONE), sm_addr); ++ ++ *data = ioparam.addr; ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_map); ++#endif ++ ++late_initcall(vc_sm_init); ++module_exit(vc_sm_exit); ++ ++MODULE_AUTHOR("Broadcom"); ++MODULE_DESCRIPTION("VideoCore SharedMemory Driver"); ++MODULE_LICENSE("GPL v2"); +diff --git a/include/linux/broadcom/vmcs_sm_ioctl.h b/include/linux/broadcom/vmcs_sm_ioctl.h +new file mode 100644 +index 000000000000..334f36d0d697 +--- /dev/null ++++ b/include/linux/broadcom/vmcs_sm_ioctl.h +@@ -0,0 +1,248 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++* ++*****************************************************************************/ ++ ++#if !defined(__VMCS_SM_IOCTL_H__INCLUDED__) ++#define __VMCS_SM_IOCTL_H__INCLUDED__ ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#if defined(__KERNEL__) ++#include /* Needed for standard types */ ++#else ++#include ++#endif ++ ++#include ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++#define VMCS_SM_RESOURCE_NAME 32 ++#define VMCS_SM_RESOURCE_NAME_DEFAULT "sm-host-resource" ++ ++/* Type define used to create unique IOCTL number */ ++#define VMCS_SM_MAGIC_TYPE 'I' ++ ++/* IOCTL commands */ ++enum vmcs_sm_cmd_e { ++ VMCS_SM_CMD_ALLOC = 0x5A, /* Start at 0x5A arbitrarily */ ++ VMCS_SM_CMD_ALLOC_SHARE, ++ VMCS_SM_CMD_LOCK, ++ VMCS_SM_CMD_LOCK_CACHE, ++ VMCS_SM_CMD_UNLOCK, ++ VMCS_SM_CMD_RESIZE, ++ VMCS_SM_CMD_UNMAP, ++ VMCS_SM_CMD_FREE, ++ VMCS_SM_CMD_FLUSH, ++ VMCS_SM_CMD_INVALID, ++ ++ VMCS_SM_CMD_SIZE_USR_HANDLE, ++ VMCS_SM_CMD_CHK_USR_HANDLE, ++ ++ VMCS_SM_CMD_MAPPED_USR_HANDLE, ++ VMCS_SM_CMD_MAPPED_USR_ADDRESS, ++ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR, ++ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL, ++ VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL, ++ ++ VMCS_SM_CMD_VC_WALK_ALLOC, ++ VMCS_SM_CMD_HOST_WALK_MAP, ++ VMCS_SM_CMD_HOST_WALK_PID_ALLOC, ++ VMCS_SM_CMD_HOST_WALK_PID_MAP, ++ ++ VMCS_SM_CMD_CLEAN_INVALID, ++ ++ VMCS_SM_CMD_LAST /* Do no delete */ ++}; ++ ++/* Cache type supported, conveniently matches the user space definition in ++** user-vcsm.h. ++*/ ++enum vmcs_sm_cache_e { ++ VMCS_SM_CACHE_NONE, ++ VMCS_SM_CACHE_HOST, ++ VMCS_SM_CACHE_VC, ++ VMCS_SM_CACHE_BOTH, ++}; ++ ++/* IOCTL Data structures */ ++struct vmcs_sm_ioctl_alloc { ++ /* user -> kernel */ ++ unsigned int size; ++ unsigned int num; ++ enum vmcs_sm_cache_e cached; ++ char name[VMCS_SM_RESOURCE_NAME]; ++ ++ /* kernel -> user */ ++ unsigned int handle; ++ /* unsigned int base_addr; */ ++}; ++ ++struct vmcs_sm_ioctl_alloc_share { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_free { ++ /* user -> kernel */ ++ unsigned int handle; ++ /* unsigned int base_addr; */ ++}; ++ ++struct vmcs_sm_ioctl_lock_unlock { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int addr; ++}; ++ ++struct vmcs_sm_ioctl_lock_cache { ++ /* user -> kernel */ ++ unsigned int handle; ++ enum vmcs_sm_cache_e cached; ++}; ++ ++struct vmcs_sm_ioctl_resize { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int new_size; ++ ++ /* kernel -> user */ ++ unsigned int old_size; ++}; ++ ++struct vmcs_sm_ioctl_map { ++ /* user -> kernel */ ++ /* and kernel -> user */ ++ unsigned int pid; ++ unsigned int handle; ++ unsigned int addr; ++ ++ /* kernel -> user */ ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_walk { ++ /* user -> kernel */ ++ unsigned int pid; ++}; ++ ++struct vmcs_sm_ioctl_chk { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int addr; ++ unsigned int size; ++ enum vmcs_sm_cache_e cache; ++}; ++ ++struct vmcs_sm_ioctl_size { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_cache { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int addr; ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_clean_invalid { ++ /* user -> kernel */ ++ struct { ++ unsigned int cmd; ++ unsigned int handle; ++ unsigned int addr; ++ unsigned int size; ++ } s[8]; ++}; ++ ++/* IOCTL numbers */ ++#define VMCS_SM_IOCTL_MEM_ALLOC\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC,\ ++ struct vmcs_sm_ioctl_alloc) ++#define VMCS_SM_IOCTL_MEM_ALLOC_SHARE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC_SHARE,\ ++ struct vmcs_sm_ioctl_alloc_share) ++#define VMCS_SM_IOCTL_MEM_LOCK\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK,\ ++ struct vmcs_sm_ioctl_lock_unlock) ++#define VMCS_SM_IOCTL_MEM_LOCK_CACHE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK_CACHE,\ ++ struct vmcs_sm_ioctl_lock_cache) ++#define VMCS_SM_IOCTL_MEM_UNLOCK\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_UNLOCK,\ ++ struct vmcs_sm_ioctl_lock_unlock) ++#define VMCS_SM_IOCTL_MEM_RESIZE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_RESIZE,\ ++ struct vmcs_sm_ioctl_resize) ++#define VMCS_SM_IOCTL_MEM_FREE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FREE,\ ++ struct vmcs_sm_ioctl_free) ++#define VMCS_SM_IOCTL_MEM_FLUSH\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FLUSH,\ ++ struct vmcs_sm_ioctl_cache) ++#define VMCS_SM_IOCTL_MEM_INVALID\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_INVALID,\ ++ struct vmcs_sm_ioctl_cache) ++#define VMCS_SM_IOCTL_MEM_CLEAN_INVALID\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CLEAN_INVALID,\ ++ struct vmcs_sm_ioctl_clean_invalid) ++ ++#define VMCS_SM_IOCTL_SIZE_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_SIZE_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_size) ++#define VMCS_SM_IOCTL_CHK_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CHK_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_chk) ++ ++#define VMCS_SM_IOCTL_MAP_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_USR_ADDRESS\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_ADDRESS,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_ADDR\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_ADDR_FR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL,\ ++ struct vmcs_sm_ioctl_map) ++ ++#define VMCS_SM_IOCTL_VC_WALK_ALLOC\ ++ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_VC_WALK_ALLOC) ++#define VMCS_SM_IOCTL_HOST_WALK_MAP\ ++ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_MAP) ++#define VMCS_SM_IOCTL_HOST_WALK_PID_ALLOC\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_ALLOC,\ ++ struct vmcs_sm_ioctl_walk) ++#define VMCS_SM_IOCTL_HOST_WALK_PID_MAP\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_MAP,\ ++ struct vmcs_sm_ioctl_walk) ++ ++/* ---- Variable Externs ------------------------------------------------- */ ++ ++/* ---- Function Prototypes ---------------------------------------------- */ ++ ++#endif /* __VMCS_SM_IOCTL_H__INCLUDED__ */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1040_c8628b0ef3217ebac93092aca5ab98cfd486810e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1040_c8628b0ef3217ebac93092aca5ab98cfd486810e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1040_c8628b0ef3217ebac93092aca5ab98cfd486810e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1040_c8628b0ef3217ebac93092aca5ab98cfd486810e.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,308 @@ +commit c8628b0ef3217ebac93092aca5ab98cfd486810e +Author: Luke Wren +Date: Fri Aug 21 23:14:48 2015 +0100 + + Add /dev/gpiomem device for rootless user GPIO access + + Signed-off-by: Luke Wren + + bcm2835-gpiomem: Fix for ARCH_BCM2835 builds + + Build on ARCH_BCM2835, and fail to probe if no IO resource. + + See: https://github.com/raspberrypi/linux/issues/1154 + +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +index 75fa1cba7640..b75c9b2639fb 100644 +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -32,3 +32,12 @@ config BCM_VC_SM + help + Support for the VC shared memory on the Broadcom reference + design. Uses the VCHIQ stack. ++ ++config BCM2835_DEVGPIOMEM ++ tristate "/dev/gpiomem rootless GPIO access via mmap() on the BCM2835" ++ default m ++ help ++ Provides users with root-free access to the GPIO registers ++ on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO ++ register page to the user's pointer. ++ +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +index de8feb98c63f..1eb06e978866 100644 +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,3 +1,6 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ ++ ++obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o ++ +diff --git a/drivers/char/broadcom/bcm2835-gpiomem.c b/drivers/char/broadcom/bcm2835-gpiomem.c +new file mode 100644 +index 000000000000..911f5b7393ed +--- /dev/null ++++ b/drivers/char/broadcom/bcm2835-gpiomem.c +@@ -0,0 +1,260 @@ ++/** ++ * GPIO memory device driver ++ * ++ * Creates a chardev /dev/gpiomem which will provide user access to ++ * the BCM2835's GPIO registers when it is mmap()'d. ++ * No longer need root for user GPIO access, but without relaxing permissions ++ * on /dev/mem. ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DEVICE_NAME "bcm2835-gpiomem" ++#define DRIVER_NAME "gpiomem-bcm2835" ++#define DEVICE_MINOR 0 ++ ++struct bcm2835_gpiomem_instance { ++ unsigned long gpio_regs_phys; ++ struct device *dev; ++}; ++ ++static struct cdev bcm2835_gpiomem_cdev; ++static dev_t bcm2835_gpiomem_devid; ++static struct class *bcm2835_gpiomem_class; ++static struct device *bcm2835_gpiomem_dev; ++static struct bcm2835_gpiomem_instance *inst; ++ ++ ++/**************************************************************************** ++* ++* GPIO mem chardev file ops ++* ++***************************************************************************/ ++ ++static int bcm2835_gpiomem_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ dev_info(inst->dev, "gpiomem device opened."); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, "Unknown minor device: %d", dev); ++ ret = -ENXIO; ++ } ++ return ret; ++} ++ ++static int bcm2835_gpiomem_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, "Unknown minor device %d", dev); ++ ret = -ENXIO; ++ } ++ return ret; ++} ++ ++static const struct vm_operations_struct bcm2835_gpiomem_vm_ops = { ++#ifdef CONFIG_HAVE_IOREMAP_PROT ++ .access = generic_access_phys ++#endif ++}; ++ ++static int bcm2835_gpiomem_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ /* Ignore what the user says - they're getting the GPIO regs ++ whether they like it or not! */ ++ unsigned long gpio_page = inst->gpio_regs_phys >> PAGE_SHIFT; ++ ++ vma->vm_page_prot = phys_mem_access_prot(file, gpio_page, ++ PAGE_SIZE, ++ vma->vm_page_prot); ++ vma->vm_ops = &bcm2835_gpiomem_vm_ops; ++ if (remap_pfn_range(vma, vma->vm_start, ++ gpio_page, ++ PAGE_SIZE, ++ vma->vm_page_prot)) { ++ return -EAGAIN; ++ } ++ return 0; ++} ++ ++static const struct file_operations ++bcm2835_gpiomem_fops = { ++ .owner = THIS_MODULE, ++ .open = bcm2835_gpiomem_open, ++ .release = bcm2835_gpiomem_release, ++ .mmap = bcm2835_gpiomem_mmap, ++}; ++ ++ ++ /**************************************************************************** ++* ++* Probe and remove functions ++* ++***************************************************************************/ ++ ++ ++static int bcm2835_gpiomem_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ struct device *dev = &pdev->dev; ++ struct resource *ioresource; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = kzalloc(sizeof(struct bcm2835_gpiomem_instance), GFP_KERNEL); ++ ++ if (!inst) { ++ err = -ENOMEM; ++ goto failed_inst_alloc; ++ } ++ ++ inst->dev = dev; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (ioresource) { ++ inst->gpio_regs_phys = ioresource->start; ++ } else { ++ dev_err(inst->dev, "failed to get IO resource"); ++ err = -ENOENT; ++ goto failed_get_resource; ++ } ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&bcm2835_gpiomem_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to allocate device number"); ++ goto failed_alloc_chrdev; ++ } ++ cdev_init(&bcm2835_gpiomem_cdev, &bcm2835_gpiomem_fops); ++ bcm2835_gpiomem_cdev.owner = THIS_MODULE; ++ err = cdev_add(&bcm2835_gpiomem_cdev, bcm2835_gpiomem_devid, 1); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to register device"); ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ bcm2835_gpiomem_class = class_create(THIS_MODULE, DEVICE_NAME); ++ ptr_err = bcm2835_gpiomem_class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ bcm2835_gpiomem_dev = device_create(bcm2835_gpiomem_class, NULL, ++ bcm2835_gpiomem_devid, NULL, ++ "gpiomem"); ++ ptr_err = bcm2835_gpiomem_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(inst->dev, "Initialised: Registers at 0x%08lx", ++ inst->gpio_regs_phys); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(bcm2835_gpiomem_class); ++failed_class_create: ++ cdev_del(&bcm2835_gpiomem_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); ++failed_alloc_chrdev: ++failed_get_resource: ++ kfree(inst); ++failed_inst_alloc: ++ dev_err(inst->dev, "could not load bcm2835_gpiomem"); ++ return err; ++} ++ ++static int bcm2835_gpiomem_remove(struct platform_device *pdev) ++{ ++ struct device *dev = inst->dev; ++ ++ kfree(inst); ++ device_destroy(bcm2835_gpiomem_class, bcm2835_gpiomem_devid); ++ class_destroy(bcm2835_gpiomem_class); ++ cdev_del(&bcm2835_gpiomem_cdev); ++ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); ++ ++ dev_info(dev, "GPIO mem driver removed - OK"); ++ return 0; ++} ++ ++ /**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_gpiomem_of_match[] = { ++ {.compatible = "brcm,bcm2835-gpiomem",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_gpiomem_of_match); ++ ++static struct platform_driver bcm2835_gpiomem_driver = { ++ .probe = bcm2835_gpiomem_probe, ++ .remove = bcm2835_gpiomem_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_gpiomem_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_gpiomem_driver); ++ ++MODULE_ALIAS("platform:gpiomem-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("gpiomem driver for accessing GPIO from userspace"); ++MODULE_AUTHOR("Luke Wren "); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1041_d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1041_d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48.patch --- linux-4.9.13/debian/patches/rpi/rpi_1041_d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1041_d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,1938 @@ +commit d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48 +Author: Luke Wren +Date: Sat Sep 5 01:14:45 2015 +0100 + + Add SMI driver + + Signed-off-by: Luke Wren + +diff --git a/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt +new file mode 100644 +index 000000000000..68cc8ebc3392 +--- /dev/null ++++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt +@@ -0,0 +1,17 @@ ++* Broadcom BCM2835 SMI character device driver. ++ ++SMI or secondary memory interface is a peripheral specific to certain Broadcom ++SOCs, and is helpful for talking to things like parallel-interface displays ++and NAND flashes (in fact, most things with a parallel register interface). ++ ++This driver adds a character device which provides a user-space interface to ++an instance of the SMI driver. ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi-dev" ++- smi_handle: a phandle to the smi node. ++ ++Optional properties: ++- None. ++ ++ +diff --git a/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt +new file mode 100644 +index 000000000000..b76dc694f1ac +--- /dev/null ++++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt +@@ -0,0 +1,48 @@ ++* Broadcom BCM2835 SMI driver. ++ ++SMI or secondary memory interface is a peripheral specific to certain Broadcom ++SOCs, and is helpful for talking to things like parallel-interface displays ++and NAND flashes (in fact, most things with a parallel register interface). ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi" ++- reg: Should contain location and length of SMI registers and SMI clkman regs ++- interrupts: *the* SMI interrupt. ++- pinctrl-names: should be "default". ++- pinctrl-0: the phandle of the gpio pin node. ++- brcm,smi-clock-source: the clock source for clkman ++- brcm,smi-clock-divisor: the integer clock divisor for clkman ++- dmas: the dma controller phandle and the DREQ number (4 on a 2835) ++- dma-names: the name used by the driver to request its channel. ++ Should be "rx-tx". ++ ++Optional properties: ++- None. ++ ++Examples: ++ ++8 data pin configuration: ++ ++smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>; ++ interrupts = <2 16>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ brcm,smi-clock-source = <6>; ++ brcm,smi-clock-divisor = <4>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ ++ status = "okay"; ++}; ++ ++smi_pins: smi_pins { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15>; ++ /* Alt 1: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0>; ++}; ++ +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +index b75c9b2639fb..f7885466f5bf 100644 +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -41,3 +41,11 @@ config BCM2835_DEVGPIOMEM + on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO + register page to the user's pointer. + ++config BCM2835_SMI_DEV ++ tristate "Character device driver for BCM2835 Secondary Memory Interface" ++ depends on BCM2835_SMI ++ default m ++ help ++ This driver provides a character device interface (ioctl + read/write) to ++ Broadcom's Secondary Memory interface. The low-level functionality is provided ++ by the SMI driver itself. +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +index 1eb06e978866..667d33ef38f3 100644 +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -3,4 +3,4 @@ obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o +- ++obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o +diff --git a/drivers/char/broadcom/bcm2835_smi_dev.c b/drivers/char/broadcom/bcm2835_smi_dev.c +new file mode 100644 +index 000000000000..d6efd92fdfe4 +--- /dev/null ++++ b/drivers/char/broadcom/bcm2835_smi_dev.c +@@ -0,0 +1,402 @@ ++/** ++ * Character device driver for Broadcom Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DEVICE_NAME "bcm2835-smi-dev" ++#define DRIVER_NAME "smi-dev-bcm2835" ++#define DEVICE_MINOR 0 ++ ++static struct cdev bcm2835_smi_cdev; ++static dev_t bcm2835_smi_devid; ++static struct class *bcm2835_smi_class; ++static struct device *bcm2835_smi_dev; ++ ++struct bcm2835_smi_dev_instance { ++ struct device *dev; ++}; ++ ++static struct bcm2835_smi_instance *smi_inst; ++static struct bcm2835_smi_dev_instance *inst; ++ ++static const char *const ioctl_names[] = { ++ "READ_SETTINGS", ++ "WRITE_SETTINGS", ++ "ADDRESS" ++}; ++ ++/**************************************************************************** ++* ++* SMI chardev file ops ++* ++***************************************************************************/ ++static long ++bcm2835_smi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ long ret = 0; ++ ++ dev_info(inst->dev, "serving ioctl..."); ++ ++ switch (cmd) { ++ case BCM2835_SMI_IOC_GET_SETTINGS:{ ++ struct smi_settings *settings; ++ ++ dev_info(inst->dev, "Reading SMI settings to user."); ++ settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ if (copy_to_user((void *)arg, settings, ++ sizeof(struct smi_settings))) ++ dev_err(inst->dev, "settings copy failed."); ++ break; ++ } ++ case BCM2835_SMI_IOC_WRITE_SETTINGS:{ ++ struct smi_settings *settings; ++ ++ dev_info(inst->dev, "Setting user's SMI settings."); ++ settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ if (copy_from_user(settings, (void *)arg, ++ sizeof(struct smi_settings))) ++ dev_err(inst->dev, "settings copy failed."); ++ else ++ bcm2835_smi_set_regs_from_settings(smi_inst); ++ break; ++ } ++ case BCM2835_SMI_IOC_ADDRESS: ++ dev_info(inst->dev, "SMI address set: 0x%02x", (int)arg); ++ bcm2835_smi_set_address(smi_inst, arg); ++ break; ++ default: ++ dev_err(inst->dev, "invalid ioctl cmd: %d", cmd); ++ ret = -ENOTTY; ++ break; ++ } ++ ++ return ret; ++} ++ ++static int bcm2835_smi_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ ++ dev_dbg(inst->dev, "SMI device opened."); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, ++ "bcm2835_smi_release: Unknown minor device: %d", ++ dev); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_smi_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, ++ "bcm2835_smi_release: Unknown minor device %d", dev); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static ssize_t dma_bounce_user( ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, ++ size_t count, ++ struct bcm2835_smi_bounce_info *bounce) ++{ ++ int chunk_size; ++ int chunk_no = 0; ++ int count_left = count; ++ ++ while (count_left) { ++ int rv; ++ void *buf; ++ ++ /* Wait for current chunk to complete: */ ++ if (down_timeout(&bounce->callback_sem, ++ msecs_to_jiffies(1000))) { ++ dev_err(inst->dev, "DMA bounce timed out"); ++ count -= (count_left); ++ break; ++ } ++ ++ if (bounce->callback_sem.count >= DMA_BOUNCE_BUFFER_COUNT - 1) ++ dev_err(inst->dev, "WARNING: Ring buffer overflow"); ++ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? ++ DMA_BOUNCE_BUFFER_SIZE : count_left; ++ buf = bounce->buffer[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; ++ if (dma_dir == DMA_DEV_TO_MEM) ++ rv = copy_to_user(user_ptr, buf, chunk_size); ++ else ++ rv = copy_from_user(buf, user_ptr, chunk_size); ++ if (rv) ++ dev_err(inst->dev, "copy_*_user() failed!: %d", rv); ++ user_ptr += chunk_size; ++ count_left -= chunk_size; ++ chunk_no++; ++ } ++ return count; ++} ++ ++static ssize_t ++bcm2835_read_file(struct file *f, char __user *user_ptr, ++ size_t count, loff_t *offs) ++{ ++ int odd_bytes; ++ ++ dev_dbg(inst->dev, "User reading %d bytes from SMI.", count); ++ /* We don't want to DMA a number of bytes % 4 != 0 (32 bit FIFO) */ ++ if (count > DMA_THRESHOLD_BYTES) ++ odd_bytes = count & 0x3; ++ else ++ odd_bytes = count; ++ count -= odd_bytes; ++ if (count) { ++ struct bcm2835_smi_bounce_info *bounce; ++ ++ count = bcm2835_smi_user_dma(smi_inst, ++ DMA_DEV_TO_MEM, user_ptr, count, ++ &bounce); ++ if (count) ++ count = dma_bounce_user(DMA_DEV_TO_MEM, user_ptr, ++ count, bounce); ++ } ++ if (odd_bytes) { ++ /* Read from FIFO directly if not using DMA */ ++ uint8_t buf[DMA_THRESHOLD_BYTES]; ++ ++ bcm2835_smi_read_buf(smi_inst, buf, odd_bytes); ++ if (copy_to_user(user_ptr, buf, odd_bytes)) ++ dev_err(inst->dev, "copy_to_user() failed."); ++ count += odd_bytes; ++ ++ } ++ return count; ++} ++ ++static ssize_t ++bcm2835_write_file(struct file *f, const char __user *user_ptr, ++ size_t count, loff_t *offs) ++{ ++ int odd_bytes; ++ ++ dev_dbg(inst->dev, "User writing %d bytes to SMI.", count); ++ if (count > DMA_THRESHOLD_BYTES) ++ odd_bytes = count & 0x3; ++ else ++ odd_bytes = count; ++ count -= odd_bytes; ++ if (count) { ++ struct bcm2835_smi_bounce_info *bounce; ++ ++ count = bcm2835_smi_user_dma(smi_inst, ++ DMA_MEM_TO_DEV, (char __user *)user_ptr, count, ++ &bounce); ++ if (count) ++ count = dma_bounce_user(DMA_MEM_TO_DEV, ++ (char __user *)user_ptr, ++ count, bounce); ++ } ++ if (odd_bytes) { ++ uint8_t buf[DMA_THRESHOLD_BYTES]; ++ ++ if (copy_from_user(buf, user_ptr, odd_bytes)) ++ dev_err(inst->dev, "copy_from_user() failed."); ++ else ++ bcm2835_smi_write_buf(smi_inst, buf, odd_bytes); ++ count += odd_bytes; ++ } ++ return count; ++} ++ ++static const struct file_operations ++bcm2835_smi_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = bcm2835_smi_ioctl, ++ .open = bcm2835_smi_open, ++ .release = bcm2835_smi_release, ++ .read = bcm2835_read_file, ++ .write = bcm2835_write_file, ++}; ++ ++ ++/**************************************************************************** ++* ++* bcm2835_smi_probe - called when the driver is loaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dev_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node, *smi_node; ++ ++ if (!node) { ++ dev_err(dev, "No device tree node supplied!"); ++ return -EINVAL; ++ } ++ ++ smi_node = of_parse_phandle(node, "smi_handle", 0); ++ ++ if (!smi_node) { ++ dev_err(dev, "No such property: smi_handle"); ++ return -ENXIO; ++ } ++ ++ smi_inst = bcm2835_smi_get(smi_node); ++ ++ if (!smi_inst) ++ return -EPROBE_DEFER; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); ++ ++ if (!inst) ++ return -ENOMEM; ++ ++ inst->dev = dev; ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&bcm2835_smi_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to allocate device number"); ++ return -ENOMEM; ++ } ++ cdev_init(&bcm2835_smi_cdev, &bcm2835_smi_fops); ++ bcm2835_smi_cdev.owner = THIS_MODULE; ++ err = cdev_add(&bcm2835_smi_cdev, bcm2835_smi_devid, 1); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to register device"); ++ err = -ENOMEM; ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ bcm2835_smi_class = class_create(THIS_MODULE, DEVICE_NAME); ++ ptr_err = bcm2835_smi_class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ bcm2835_smi_dev = device_create(bcm2835_smi_class, NULL, ++ bcm2835_smi_devid, NULL, ++ "smi"); ++ ptr_err = bcm2835_smi_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(inst->dev, "initialised"); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(bcm2835_smi_class); ++failed_class_create: ++ cdev_del(&bcm2835_smi_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(bcm2835_smi_devid, 1); ++ dev_err(dev, "could not load bcm2835_smi_dev"); ++ return err; ++} ++ ++/**************************************************************************** ++* ++* bcm2835_smi_remove - called when the driver is unloaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dev_remove(struct platform_device *pdev) ++{ ++ device_destroy(bcm2835_smi_class, bcm2835_smi_devid); ++ class_destroy(bcm2835_smi_class); ++ cdev_del(&bcm2835_smi_cdev); ++ unregister_chrdev_region(bcm2835_smi_devid, 1); ++ ++ dev_info(inst->dev, "SMI character dev removed - OK"); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_dev_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi-dev",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_dev_of_match); ++ ++static struct platform_driver bcm2835_smi_dev_driver = { ++ .probe = bcm2835_smi_dev_probe, ++ .remove = bcm2835_smi_dev_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_dev_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_dev_driver); ++ ++MODULE_ALIAS("platform:smi-dev-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION( ++ "Character device driver for BCM2835's secondary memory interface"); ++MODULE_AUTHOR("Luke Wren "); +diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig +index 64971baf11fa..779f7d61a177 100644 +--- a/drivers/misc/Kconfig ++++ b/drivers/misc/Kconfig +@@ -10,6 +10,14 @@ config SENSORS_LIS3LV02D + select INPUT_POLLDEV + default n + ++config BCM2835_SMI ++ tristate "Broadcom 283x Secondary Memory Interface driver" ++ depends on ARCH_BCM2835 ++ default m ++ help ++ Driver for enabling and using Broadcom's Secondary/Slow Memory Interface. ++ Appears as /dev/bcm2835_smi. For ioctl interface see drivers/misc/bcm2835_smi.h ++ + config AD525X_DPOT + tristate "Analog Devices Digital Potentiometers" + depends on (I2C || SPI) && SYSFS +diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile +index 31983366090a..6c400f0fb92f 100644 +--- a/drivers/misc/Makefile ++++ b/drivers/misc/Makefile +@@ -9,6 +9,7 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o + obj-$(CONFIG_INTEL_MID_PTI) += pti.o + obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o + obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o ++obj-$(CONFIG_BCM2835_SMI) += bcm2835_smi.o + obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o + obj-$(CONFIG_ICS932S401) += ics932s401.o + obj-$(CONFIG_LKDTM) += lkdtm.o +diff --git a/drivers/misc/bcm2835_smi.c b/drivers/misc/bcm2835_smi.c +new file mode 100644 +index 000000000000..63a4ea08b993 +--- /dev/null ++++ b/drivers/misc/bcm2835_smi.c +@@ -0,0 +1,985 @@ ++/** ++ * Broadcom Secondary Memory Interface driver ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BCM2835_SMI_IMPLEMENTATION ++#include ++ ++#define DRIVER_NAME "smi-bcm2835" ++ ++#define N_PAGES_FROM_BYTES(n) ((n + PAGE_SIZE-1) / PAGE_SIZE) ++ ++#define DMA_WRITE_TO_MEM true ++#define DMA_READ_FROM_MEM false ++ ++struct bcm2835_smi_instance { ++ struct device *dev; ++ struct smi_settings settings; ++ __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; ++ dma_addr_t smi_regs_busaddr; ++ ++ struct dma_chan *dma_chan; ++ struct dma_slave_config dma_config; ++ ++ struct bcm2835_smi_bounce_info bounce; ++ ++ struct scatterlist buffer_sgl; ++ ++ int clock_source; ++ int clock_divisor; ++ ++ /* Sometimes we are called into in an atomic context (e.g. by ++ JFFS2 + MTD) so we can't use a mutex */ ++ spinlock_t transaction_lock; ++}; ++ ++/**************************************************************************** ++* ++* SMI clock manager setup ++* ++***************************************************************************/ ++ ++static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, ++ u32 val, unsigned reg) ++{ ++ writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); ++} ++ ++static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, ++ unsigned reg) ++{ ++ return readl(inst->cm_smi_regs_ptr + reg); ++} ++ ++static void smi_setup_clock(struct bcm2835_smi_instance *inst) ++{ ++ dev_dbg(inst->dev, "Setting up clock..."); ++ /* Disable SMI clock and wait for it to stop. */ ++ write_smi_cm_reg(inst, 0, CM_SMI_CTL); ++ while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) ++ ; ++ ++ write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), ++ CM_SMI_DIV); ++ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), ++ CM_SMI_CTL); ++ ++ /* Enable the clock */ ++ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | ++ CM_SMI_CTL_ENAB, CM_SMI_CTL); ++} ++ ++/**************************************************************************** ++* ++* SMI peripheral setup ++* ++***************************************************************************/ ++ ++static inline void write_smi_reg(struct bcm2835_smi_instance *inst, ++ u32 val, unsigned reg) ++{ ++ writel(val, inst->smi_regs_ptr + reg); ++} ++ ++static inline u32 read_smi_reg(struct bcm2835_smi_instance *inst, unsigned reg) ++{ ++ return readl(inst->smi_regs_ptr + reg); ++} ++ ++/* Token-paste macro for e.g SMIDSR_RSTROBE -> value of SMIDSR_RSTROBE_MASK */ ++#define _CONCAT(x, y) x##y ++#define CONCAT(x, y) _CONCAT(x, y) ++ ++#define SET_BIT_FIELD(dest, field, bits) ((dest) = \ ++ ((dest) & ~CONCAT(field, _MASK)) | (((bits) << CONCAT(field, _OFFS))& \ ++ CONCAT(field, _MASK))) ++#define GET_BIT_FIELD(src, field) (((src) & \ ++ CONCAT(field, _MASK)) >> CONCAT(field, _OFFS)) ++ ++static void smi_dump_context_labelled(struct bcm2835_smi_instance *inst, ++ const char *label) ++{ ++ dev_err(inst->dev, "SMI context dump: %s", label); ++ dev_err(inst->dev, "SMICS: 0x%08x", read_smi_reg(inst, SMICS)); ++ dev_err(inst->dev, "SMIL: 0x%08x", read_smi_reg(inst, SMIL)); ++ dev_err(inst->dev, "SMIDSR: 0x%08x", read_smi_reg(inst, SMIDSR0)); ++ dev_err(inst->dev, "SMIDSW: 0x%08x", read_smi_reg(inst, SMIDSW0)); ++ dev_err(inst->dev, "SMIDC: 0x%08x", read_smi_reg(inst, SMIDC)); ++ dev_err(inst->dev, "SMIFD: 0x%08x", read_smi_reg(inst, SMIFD)); ++ dev_err(inst->dev, " "); ++} ++ ++static inline void smi_dump_context(struct bcm2835_smi_instance *inst) ++{ ++ smi_dump_context_labelled(inst, ""); ++} ++ ++static void smi_get_default_settings(struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ ++ settings->data_width = SMI_WIDTH_16BIT; ++ settings->pack_data = true; ++ ++ settings->read_setup_time = 1; ++ settings->read_hold_time = 1; ++ settings->read_pace_time = 1; ++ settings->read_strobe_time = 3; ++ ++ settings->write_setup_time = settings->read_setup_time; ++ settings->write_hold_time = settings->read_hold_time; ++ settings->write_pace_time = settings->read_pace_time; ++ settings->write_strobe_time = settings->read_strobe_time; ++ ++ settings->dma_enable = true; ++ settings->dma_passthrough_enable = false; ++ settings->dma_read_thresh = 0x01; ++ settings->dma_write_thresh = 0x3f; ++ settings->dma_panic_read_thresh = 0x20; ++ settings->dma_panic_write_thresh = 0x20; ++} ++ ++void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ int smidsr_temp = 0, smidsw_temp = 0, smics_temp, ++ smidcs_temp, smidc_temp = 0; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ /* temporarily disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS); ++ write_smi_reg(inst, 0, SMICS); ++ smidcs_temp = read_smi_reg(inst, SMIDCS); ++ write_smi_reg(inst, 0, SMIDCS); ++ ++ if (settings->pack_data) ++ smics_temp |= SMICS_PXLDAT; ++ else ++ smics_temp &= ~SMICS_PXLDAT; ++ ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RWIDTH, settings->data_width); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSETUP, settings->read_setup_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RHOLD, settings->read_hold_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RPACE, settings->read_pace_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSTROBE, settings->read_strobe_time); ++ write_smi_reg(inst, smidsr_temp, SMIDSR0); ++ ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WWIDTH, settings->data_width); ++ if (settings->data_width == SMI_WIDTH_8BIT) ++ smidsw_temp |= SMIDSW_WSWAP; ++ else ++ smidsw_temp &= ~SMIDSW_WSWAP; ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSETUP, settings->write_setup_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WHOLD, settings->write_hold_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WPACE, settings->write_pace_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSTROBE, ++ settings->write_strobe_time); ++ write_smi_reg(inst, smidsw_temp, SMIDSW0); ++ ++ SET_BIT_FIELD(smidc_temp, SMIDC_REQR, settings->dma_read_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_REQW, settings->dma_write_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_PANICR, ++ settings->dma_panic_read_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_PANICW, ++ settings->dma_panic_write_thresh); ++ if (settings->dma_passthrough_enable) { ++ smidc_temp |= SMIDC_DMAP; ++ smidsr_temp |= SMIDSR_RDREQ; ++ write_smi_reg(inst, smidsr_temp, SMIDSR0); ++ smidsw_temp |= SMIDSW_WDREQ; ++ write_smi_reg(inst, smidsw_temp, SMIDSW0); ++ } else ++ smidc_temp &= ~SMIDC_DMAP; ++ if (settings->dma_enable) ++ smidc_temp |= SMIDC_DMAEN; ++ else ++ smidc_temp &= ~SMIDC_DMAEN; ++ ++ write_smi_reg(inst, smidc_temp, SMIDC); ++ ++ /* re-enable (if was previously enabled) */ ++ write_smi_reg(inst, smics_temp, SMICS); ++ write_smi_reg(inst, smidcs_temp, SMIDCS); ++ ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_set_regs_from_settings); ++ ++struct smi_settings *bcm2835_smi_get_settings_from_regs ++ (struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ int smidsr, smidsw, smidc; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ smidsr = read_smi_reg(inst, SMIDSR0); ++ smidsw = read_smi_reg(inst, SMIDSW0); ++ smidc = read_smi_reg(inst, SMIDC); ++ ++ settings->pack_data = (read_smi_reg(inst, SMICS) & SMICS_PXLDAT) ? ++ true : false; ++ ++ settings->data_width = GET_BIT_FIELD(smidsr, SMIDSR_RWIDTH); ++ settings->read_setup_time = GET_BIT_FIELD(smidsr, SMIDSR_RSETUP); ++ settings->read_hold_time = GET_BIT_FIELD(smidsr, SMIDSR_RHOLD); ++ settings->read_pace_time = GET_BIT_FIELD(smidsr, SMIDSR_RPACE); ++ settings->read_strobe_time = GET_BIT_FIELD(smidsr, SMIDSR_RSTROBE); ++ ++ settings->write_setup_time = GET_BIT_FIELD(smidsw, SMIDSW_WSETUP); ++ settings->write_hold_time = GET_BIT_FIELD(smidsw, SMIDSW_WHOLD); ++ settings->write_pace_time = GET_BIT_FIELD(smidsw, SMIDSW_WPACE); ++ settings->write_strobe_time = GET_BIT_FIELD(smidsw, SMIDSW_WSTROBE); ++ ++ settings->dma_read_thresh = GET_BIT_FIELD(smidc, SMIDC_REQR); ++ settings->dma_write_thresh = GET_BIT_FIELD(smidc, SMIDC_REQW); ++ settings->dma_panic_read_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICR); ++ settings->dma_panic_write_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICW); ++ settings->dma_passthrough_enable = (smidc & SMIDC_DMAP) ? true : false; ++ settings->dma_enable = (smidc & SMIDC_DMAEN) ? true : false; ++ ++ spin_unlock(&inst->transaction_lock); ++ ++ return settings; ++} ++EXPORT_SYMBOL(bcm2835_smi_get_settings_from_regs); ++ ++static inline void smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address) ++{ ++ int smia_temp = 0, smida_temp = 0; ++ ++ SET_BIT_FIELD(smia_temp, SMIA_ADDR, address); ++ SET_BIT_FIELD(smida_temp, SMIDA_ADDR, address); ++ ++ /* Write to both address registers - user doesn't care whether we're ++ doing programmed or direct transfers. */ ++ write_smi_reg(inst, smia_temp, SMIA); ++ write_smi_reg(inst, smida_temp, SMIDA); ++} ++ ++static void smi_setup_regs(struct bcm2835_smi_instance *inst) ++{ ++ ++ dev_dbg(inst->dev, "Initialising SMI registers..."); ++ /* Disable the peripheral if already enabled */ ++ write_smi_reg(inst, 0, SMICS); ++ write_smi_reg(inst, 0, SMIDCS); ++ ++ smi_get_default_settings(inst); ++ bcm2835_smi_set_regs_from_settings(inst); ++ smi_set_address(inst, 0); ++ ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ENABLE, SMICS); ++ write_smi_reg(inst, read_smi_reg(inst, SMIDCS) | SMIDCS_ENABLE, ++ SMIDCS); ++} ++ ++/**************************************************************************** ++* ++* Low-level SMI access functions ++* Other modules should use the exported higher-level functions e.g. ++* bcm2835_smi_write_buf() unless they have a good reason to use these ++* ++***************************************************************************/ ++ ++static inline uint32_t smi_read_single_word(struct bcm2835_smi_instance *inst) ++{ ++ int timeout = 0; ++ ++ write_smi_reg(inst, SMIDCS_ENABLE, SMIDCS); ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_START, SMIDCS); ++ /* Make sure things happen in the right order...*/ ++ mb(); ++ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && ++ ++timeout < 10000) ++ ; ++ if (timeout < 10000) ++ return read_smi_reg(inst, SMIDD); ++ ++ dev_err(inst->dev, ++ "SMI direct read timed out (is the clock set up correctly?)"); ++ return 0; ++} ++ ++static inline void smi_write_single_word(struct bcm2835_smi_instance *inst, ++ uint32_t data) ++{ ++ int timeout = 0; ++ ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE, SMIDCS); ++ write_smi_reg(inst, data, SMIDD); ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE | SMIDCS_START, ++ SMIDCS); ++ ++ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && ++ ++timeout < 10000) ++ ; ++ if (timeout >= 10000) ++ dev_err(inst->dev, ++ "SMI direct write timed out (is the clock set up correctly?)"); ++} ++ ++/* Initiates a programmed read into the read FIFO. It is up to the caller to ++ * read data from the FIFO - either via paced DMA transfer, ++ * or polling SMICS_RXD to check whether data is available. ++ * SMICS_ACTIVE will go low upon completion. */ ++static void smi_init_programmed_read(struct bcm2835_smi_instance *inst, ++ int num_transfers) ++{ ++ int smics_temp; ++ ++ /* Disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS) & ~(SMICS_ENABLE | SMICS_WRITE); ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) ++ ; ++ ++ /* Program the transfer count: */ ++ write_smi_reg(inst, num_transfers, SMIL); ++ ++ /* re-enable and start: */ ++ smics_temp |= SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_CLEAR; ++ /* Just to be certain: */ ++ mb(); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ ; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_START; ++ write_smi_reg(inst, smics_temp, SMICS); ++} ++ ++/* Initiates a programmed write sequence, using data from the write FIFO. ++ * It is up to the caller to initiate a DMA transfer before calling, ++ * or use another method to keep the write FIFO topped up. ++ * SMICS_ACTIVE will go low upon completion. ++ */ ++static void smi_init_programmed_write(struct bcm2835_smi_instance *inst, ++ int num_transfers) ++{ ++ int smics_temp; ++ ++ /* Disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) ++ ; ++ ++ /* Program the transfer count: */ ++ write_smi_reg(inst, num_transfers, SMIL); ++ ++ /* setup, re-enable and start: */ ++ smics_temp |= SMICS_WRITE | SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_START; ++ write_smi_reg(inst, smics_temp, SMICS); ++} ++ ++/* Initiate a read and then poll FIFO for data, reading out as it appears. */ ++static void smi_read_fifo(struct bcm2835_smi_instance *inst, ++ uint32_t *dest, int n_bytes) ++{ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { ++ smi_dump_context_labelled(inst, ++ "WARNING: read FIFO not empty at start of read call."); ++ while (read_smi_reg(inst, SMICS)) ++ ; ++ } ++ ++ /* Dispatch the read: */ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_read(inst, n_bytes); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ smi_init_programmed_read(inst, n_bytes / 2); ++ else { ++ dev_err(inst->dev, "Unsupported data width for read."); ++ return; ++ } ++ ++ /* Poll FIFO to keep it empty */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) ++ *dest++ = read_smi_reg(inst, SMID); ++ ++ /* Ensure that the FIFO is emptied */ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { ++ int fifo_count; ++ ++ fifo_count = GET_BIT_FIELD(read_smi_reg(inst, SMIFD), ++ SMIFD_FCNT); ++ while (fifo_count--) ++ *dest++ = read_smi_reg(inst, SMID); ++ } ++ ++ if (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ smi_dump_context_labelled(inst, ++ "WARNING: transaction finished but done bit not set."); ++ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) ++ smi_dump_context_labelled(inst, ++ "WARNING: read FIFO not empty at end of read call."); ++ ++} ++ ++/* Initiate a write, and then keep the FIFO topped up. */ ++static void smi_write_fifo(struct bcm2835_smi_instance *inst, ++ uint32_t *src, int n_bytes) ++{ ++ int i, timeout = 0; ++ ++ /* Empty FIFOs if not already so */ ++ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) { ++ smi_dump_context_labelled(inst, ++ "WARNING: write fifo not empty at start of write call."); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_CLEAR, ++ SMICS); ++ } ++ ++ /* Initiate the transfer */ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_write(inst, n_bytes); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ smi_init_programmed_write(inst, n_bytes / 2); ++ else { ++ dev_err(inst->dev, "Unsupported data width for write."); ++ return; ++ } ++ /* Fill the FIFO: */ ++ for (i = 0; i < (n_bytes - 1) / 4 + 1; ++i) { ++ while (!(read_smi_reg(inst, SMICS) & SMICS_TXD)) ++ ; ++ write_smi_reg(inst, *src++, SMID); ++ } ++ /* Busy wait... */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE) && ++timeout < ++ 1000000) ++ ; ++ if (timeout >= 1000000) ++ smi_dump_context_labelled(inst, ++ "Timed out on write operation!"); ++ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) ++ smi_dump_context_labelled(inst, ++ "WARNING: FIFO not empty at end of write operation."); ++} ++ ++/**************************************************************************** ++* ++* SMI DMA operations ++* ++***************************************************************************/ ++ ++/* Disable SMI and put it into the correct direction before doing DMA setup. ++ Stops spurious DREQs during setup. Peripheral is re-enabled by init_*() */ ++static void smi_disable(struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction direction) ++{ ++ int smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; ++ ++ if (direction == DMA_DEV_TO_MEM) ++ smics_temp &= ~SMICS_WRITE; ++ else ++ smics_temp |= SMICS_WRITE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ ; ++} ++ ++static struct scatterlist *smi_scatterlist_from_buffer( ++ struct bcm2835_smi_instance *inst, ++ dma_addr_t buf, ++ size_t len, ++ struct scatterlist *sg) ++{ ++ sg_init_table(sg, 1); ++ sg_dma_address(sg) = buf; ++ sg_dma_len(sg) = len; ++ return sg; ++} ++ ++static void smi_dma_callback_user_copy(void *param) ++{ ++ /* Notify the bottom half that a chunk is ready for user copy */ ++ struct bcm2835_smi_instance *inst = ++ (struct bcm2835_smi_instance *)param; ++ ++ up(&inst->bounce.callback_sem); ++} ++ ++/* Creates a descriptor, assigns the given callback, and submits the ++ descriptor to dmaengine. Does not block - can queue up multiple ++ descriptors and then wait for them all to complete. ++ sg_len is the number of control blocks, NOT the number of bytes. ++ dir can be DMA_MEM_TO_DEV or DMA_DEV_TO_MEM. ++ callback can be NULL - in this case it is not called. */ ++static inline struct dma_async_tx_descriptor *smi_dma_submit_sgl( ++ struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, ++ size_t sg_len, ++ enum dma_transfer_direction dir, ++ dma_async_tx_callback callback) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ desc = dmaengine_prep_slave_sg(inst->dma_chan, ++ sgl, ++ sg_len, ++ dir, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK | ++ DMA_PREP_FENCE); ++ if (!desc) { ++ dev_err(inst->dev, "read_sgl: dma slave preparation failed!"); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) & ~SMICS_ACTIVE, ++ SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ cpu_relax(); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ACTIVE, ++ SMICS); ++ return NULL; ++ } ++ desc->callback = callback; ++ desc->callback_param = inst; ++ if (dmaengine_submit(desc) < 0) ++ return NULL; ++ return desc; ++} ++ ++/* NB this function blocks until the transfer is complete */ ++static void ++smi_dma_read_sgl(struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ /* Disable SMI and set to read before dispatching DMA - if SMI is in ++ * write mode and TX fifo is empty, it will generate a DREQ which may ++ * cause the read DMA to complete before the SMI read command is even ++ * dispatched! We want to dispatch DMA before SMI read so that reading ++ * is gapless, for logic analyser. ++ */ ++ ++ smi_disable(inst, DMA_DEV_TO_MEM); ++ ++ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_DEV_TO_MEM, NULL); ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_read(inst, n_bytes); ++ else ++ smi_init_programmed_read(inst, n_bytes / 2); ++ ++ if (dma_wait_for_async_tx(desc) == DMA_ERROR) ++ smi_dump_context_labelled(inst, "DMA timeout!"); ++} ++ ++static void ++smi_dma_write_sgl(struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_write(inst, n_bytes); ++ else ++ smi_init_programmed_write(inst, n_bytes / 2); ++ ++ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_MEM_TO_DEV, NULL); ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (dma_wait_for_async_tx(desc) == DMA_ERROR) ++ smi_dump_context_labelled(inst, "DMA timeout!"); ++ else ++ /* Wait for SMI to finish our writes */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ cpu_relax(); ++} ++ ++ssize_t bcm2835_smi_user_dma( ++ struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, size_t count, ++ struct bcm2835_smi_bounce_info **bounce) ++{ ++ int chunk_no = 0, chunk_size, count_left = count; ++ struct scatterlist *sgl; ++ void (*init_trans_func)(struct bcm2835_smi_instance *, int); ++ ++ spin_lock(&inst->transaction_lock); ++ ++ if (dma_dir == DMA_DEV_TO_MEM) ++ init_trans_func = smi_init_programmed_read; ++ else ++ init_trans_func = smi_init_programmed_write; ++ ++ smi_disable(inst, dma_dir); ++ ++ sema_init(&inst->bounce.callback_sem, 0); ++ if (bounce) ++ *bounce = &inst->bounce; ++ while (count_left) { ++ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? ++ DMA_BOUNCE_BUFFER_SIZE : count_left; ++ if (chunk_size == DMA_BOUNCE_BUFFER_SIZE) { ++ sgl = ++ &inst->bounce.sgl[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; ++ } else { ++ sgl = smi_scatterlist_from_buffer( ++ inst, ++ inst->bounce.phys[ ++ chunk_no % DMA_BOUNCE_BUFFER_COUNT], ++ chunk_size, ++ &inst->buffer_sgl); ++ } ++ ++ if (!smi_dma_submit_sgl(inst, sgl, 1, dma_dir, ++ smi_dma_callback_user_copy ++ )) { ++ dev_err(inst->dev, "sgl submit failed"); ++ count = 0; ++ goto out; ++ } ++ count_left -= chunk_size; ++ chunk_no++; ++ } ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ init_trans_func(inst, count); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ init_trans_func(inst, count / 2); ++out: ++ spin_unlock(&inst->transaction_lock); ++ return count; ++} ++EXPORT_SYMBOL(bcm2835_smi_user_dma); ++ ++ ++/**************************************************************************** ++* ++* High level buffer transfer functions - for use by other drivers ++* ++***************************************************************************/ ++ ++/* Buffer must be physically contiguous - i.e. kmalloc, not vmalloc! */ ++void bcm2835_smi_write_buf( ++ struct bcm2835_smi_instance *inst, ++ const void *buf, size_t n_bytes) ++{ ++ int odd_bytes = n_bytes & 0x3; ++ ++ n_bytes -= odd_bytes; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ if (n_bytes > DMA_THRESHOLD_BYTES) { ++ dma_addr_t phy_addr = dma_map_single( ++ inst->dev, ++ (void *)buf, ++ n_bytes, ++ DMA_MEM_TO_DEV); ++ struct scatterlist *sgl = ++ smi_scatterlist_from_buffer(inst, phy_addr, n_bytes, ++ &inst->buffer_sgl); ++ ++ if (!sgl) { ++ smi_dump_context_labelled(inst, ++ "Error: could not create scatterlist for write!"); ++ goto out; ++ } ++ smi_dma_write_sgl(inst, sgl, 1, n_bytes); ++ ++ dma_unmap_single ++ (inst->dev, phy_addr, n_bytes, DMA_MEM_TO_DEV); ++ } else if (n_bytes) { ++ smi_write_fifo(inst, (uint32_t *) buf, n_bytes); ++ } ++ buf += n_bytes; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) { ++ while (odd_bytes--) ++ smi_write_single_word(inst, *(uint8_t *) (buf++)); ++ } else { ++ while (odd_bytes >= 2) { ++ smi_write_single_word(inst, *(uint16_t *)buf); ++ buf += 2; ++ odd_bytes -= 2; ++ } ++ if (odd_bytes) { ++ /* Reading an odd number of bytes on a 16 bit bus is ++ a user bug. It's kinder to fail early and tell them ++ than to e.g. transparently give them the bottom byte ++ of a 16 bit transfer. */ ++ dev_err(inst->dev, ++ "WARNING: odd number of bytes specified for wide transfer."); ++ dev_err(inst->dev, ++ "At least one byte dropped as a result."); ++ dump_stack(); ++ } ++ } ++out: ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_write_buf); ++ ++void bcm2835_smi_read_buf(struct bcm2835_smi_instance *inst, ++ void *buf, size_t n_bytes) ++{ ++ ++ /* SMI is inherently 32-bit, which causes surprising amounts of mess ++ for bytes % 4 != 0. Easiest to avoid this mess altogether ++ by handling remainder separately. */ ++ int odd_bytes = n_bytes & 0x3; ++ ++ spin_lock(&inst->transaction_lock); ++ n_bytes -= odd_bytes; ++ if (n_bytes > DMA_THRESHOLD_BYTES) { ++ dma_addr_t phy_addr = dma_map_single(inst->dev, ++ buf, n_bytes, ++ DMA_DEV_TO_MEM); ++ struct scatterlist *sgl = smi_scatterlist_from_buffer( ++ inst, phy_addr, n_bytes, ++ &inst->buffer_sgl); ++ if (!sgl) { ++ smi_dump_context_labelled(inst, ++ "Error: could not create scatterlist for read!"); ++ goto out; ++ } ++ smi_dma_read_sgl(inst, sgl, 1, n_bytes); ++ dma_unmap_single(inst->dev, phy_addr, n_bytes, DMA_DEV_TO_MEM); ++ } else if (n_bytes) { ++ smi_read_fifo(inst, (uint32_t *)buf, n_bytes); ++ } ++ buf += n_bytes; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) { ++ while (odd_bytes--) ++ *((uint8_t *) (buf++)) = smi_read_single_word(inst); ++ } else { ++ while (odd_bytes >= 2) { ++ *(uint16_t *) buf = smi_read_single_word(inst); ++ buf += 2; ++ odd_bytes -= 2; ++ } ++ if (odd_bytes) { ++ dev_err(inst->dev, ++ "WARNING: odd number of bytes specified for wide transfer."); ++ dev_err(inst->dev, ++ "At least one byte dropped as a result."); ++ dump_stack(); ++ } ++ } ++out: ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_read_buf); ++ ++void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address) ++{ ++ spin_lock(&inst->transaction_lock); ++ smi_set_address(inst, address); ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_set_address); ++ ++struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node) ++{ ++ struct platform_device *pdev; ++ ++ if (!node) ++ return NULL; ++ ++ pdev = of_find_device_by_node(node); ++ if (!pdev) ++ return NULL; ++ ++ return platform_get_drvdata(pdev); ++} ++EXPORT_SYMBOL(bcm2835_smi_get); ++ ++/**************************************************************************** ++* ++* bcm2835_smi_probe - called when the driver is loaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dma_setup(struct bcm2835_smi_instance *inst) ++{ ++ int i, rv = 0; ++ ++ inst->dma_chan = dma_request_slave_channel(inst->dev, "rx-tx"); ++ ++ inst->dma_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ inst->dma_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ inst->dma_config.src_addr = inst->smi_regs_busaddr + SMID; ++ inst->dma_config.dst_addr = inst->dma_config.src_addr; ++ /* Direction unimportant - always overridden by prep_slave_sg */ ++ inst->dma_config.direction = DMA_DEV_TO_MEM; ++ dmaengine_slave_config(inst->dma_chan, &inst->dma_config); ++ /* Alloc and map bounce buffers */ ++ for (i = 0; i < DMA_BOUNCE_BUFFER_COUNT; ++i) { ++ inst->bounce.buffer[i] = ++ dmam_alloc_coherent(inst->dev, DMA_BOUNCE_BUFFER_SIZE, ++ &inst->bounce.phys[i], ++ GFP_KERNEL); ++ if (!inst->bounce.buffer[i]) { ++ dev_err(inst->dev, "Could not allocate buffer!"); ++ rv = -ENOMEM; ++ break; ++ } ++ smi_scatterlist_from_buffer( ++ inst, ++ inst->bounce.phys[i], ++ DMA_BOUNCE_BUFFER_SIZE, ++ &inst->bounce.sgl[i] ++ ); ++ } ++ ++ return rv; ++} ++ ++static int bcm2835_smi_probe(struct platform_device *pdev) ++{ ++ int err; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct resource *ioresource; ++ struct bcm2835_smi_instance *inst; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), ++ GFP_KERNEL); ++ ++ if (!inst) ++ return -ENOMEM; ++ ++ inst->dev = dev; ++ spin_lock_init(&inst->transaction_lock); ++ ++ /* We require device tree support */ ++ if (!node) ++ return -EINVAL; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); ++ inst->smi_regs_busaddr = be32_to_cpu( ++ *of_get_address(node, 0, NULL, NULL)); ++ of_property_read_u32(node, ++ "brcm,smi-clock-source", ++ &inst->clock_source); ++ of_property_read_u32(node, ++ "brcm,smi-clock-divisor", ++ &inst->clock_divisor); ++ ++ err = bcm2835_smi_dma_setup(inst); ++ if (err) ++ return err; ++ ++ /* Finally, do peripheral setup */ ++ ++ smi_setup_clock(inst); ++ smi_setup_regs(inst); ++ ++ platform_set_drvdata(pdev, inst); ++ ++ dev_info(inst->dev, "initialised"); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* bcm2835_smi_remove - called when the driver is unloaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); ++ struct device *dev = inst->dev; ++ ++ dev_info(dev, "SMI device removed - OK"); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_of_match); ++ ++static struct platform_driver bcm2835_smi_driver = { ++ .probe = bcm2835_smi_probe, ++ .remove = bcm2835_smi_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_driver); ++ ++MODULE_ALIAS("platform:smi-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Device driver for BCM2835's secondary memory interface"); ++MODULE_AUTHOR("Luke Wren "); +diff --git a/include/linux/broadcom/bcm2835_smi.h b/include/linux/broadcom/bcm2835_smi.h +new file mode 100644 +index 000000000000..ee3a75edfc03 +--- /dev/null ++++ b/include/linux/broadcom/bcm2835_smi.h +@@ -0,0 +1,391 @@ ++/** ++ * Declarations and definitions for Broadcom's Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * Copyright (c) 2010-2012 Broadcom. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifndef BCM2835_SMI_H ++#define BCM2835_SMI_H ++ ++#include ++ ++#ifndef __KERNEL__ ++#include ++#include ++#endif ++ ++#define BCM2835_SMI_IOC_MAGIC 0x1 ++#define BCM2835_SMI_INVALID_HANDLE (~0) ++ ++/* IOCTLs 0x100...0x1ff are not device-specific - we can use them */ ++#define BCM2835_SMI_IOC_GET_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 0) ++#define BCM2835_SMI_IOC_WRITE_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 1) ++#define BCM2835_SMI_IOC_ADDRESS _IO(BCM2835_SMI_IOC_MAGIC, 2) ++#define BCM2835_SMI_IOC_MAX 2 ++ ++#define SMI_WIDTH_8BIT 0 ++#define SMI_WIDTH_16BIT 1 ++#define SMI_WIDTH_9BIT 2 ++#define SMI_WIDTH_18BIT 3 ++ ++/* max number of bytes where DMA will not be used */ ++#define DMA_THRESHOLD_BYTES 128 ++#define DMA_BOUNCE_BUFFER_SIZE (1024 * 1024 / 2) ++#define DMA_BOUNCE_BUFFER_COUNT 3 ++ ++ ++struct smi_settings { ++ int data_width; ++ /* Whether or not to pack multiple SMI transfers into a ++ single 32 bit FIFO word */ ++ bool pack_data; ++ ++ /* Timing for reads (writes the same but for WE) ++ * ++ * OE ----------+ +-------------------- ++ * | | ++ * +----------+ ++ * SD -<==============================>----------- ++ * SA -<=========================================>- ++ * <-setup-> <-strobe -> <-hold -> <- pace -> ++ */ ++ ++ int read_setup_time; ++ int read_hold_time; ++ int read_pace_time; ++ int read_strobe_time; ++ ++ int write_setup_time; ++ int write_hold_time; ++ int write_pace_time; ++ int write_strobe_time; ++ ++ bool dma_enable; /* DREQs */ ++ bool dma_passthrough_enable; /* External DREQs */ ++ int dma_read_thresh; ++ int dma_write_thresh; ++ int dma_panic_read_thresh; ++ int dma_panic_write_thresh; ++}; ++ ++/**************************************************************************** ++* ++* Declare exported SMI functions ++* ++***************************************************************************/ ++ ++#ifdef __KERNEL__ ++ ++#include /* for enum dma_transfer_direction */ ++#include ++#include ++ ++struct bcm2835_smi_instance; ++ ++struct bcm2835_smi_bounce_info { ++ struct semaphore callback_sem; ++ void *buffer[DMA_BOUNCE_BUFFER_COUNT]; ++ dma_addr_t phys[DMA_BOUNCE_BUFFER_COUNT]; ++ struct scatterlist sgl[DMA_BOUNCE_BUFFER_COUNT]; ++}; ++ ++ ++void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *); ++ ++struct smi_settings *bcm2835_smi_get_settings_from_regs( ++ struct bcm2835_smi_instance *inst); ++ ++void bcm2835_smi_write_buf( ++ struct bcm2835_smi_instance *inst, ++ const void *buf, ++ size_t n_bytes); ++ ++void bcm2835_smi_read_buf( ++ struct bcm2835_smi_instance *inst, ++ void *buf, ++ size_t n_bytes); ++ ++void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address); ++ ++ssize_t bcm2835_smi_user_dma( ++ struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, ++ size_t count, ++ struct bcm2835_smi_bounce_info **bounce); ++ ++struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node); ++ ++#endif /* __KERNEL__ */ ++ ++/**************************************************************** ++* ++* Implementation-only declarations ++* ++****************************************************************/ ++ ++#ifdef BCM2835_SMI_IMPLEMENTATION ++ ++/* Clock manager registers for SMI clock: */ ++#define CM_SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x1010b0) ++/* Clock manager "password" to protect registers from spurious writes */ ++#define CM_PWD (0x5a << 24) ++ ++#define CM_SMI_CTL 0x00 ++#define CM_SMI_DIV 0x04 ++ ++#define CM_SMI_CTL_FLIP (1 << 8) ++#define CM_SMI_CTL_BUSY (1 << 7) ++#define CM_SMI_CTL_KILL (1 << 5) ++#define CM_SMI_CTL_ENAB (1 << 4) ++#define CM_SMI_CTL_SRC_MASK (0xf) ++#define CM_SMI_CTL_SRC_OFFS (0) ++ ++#define CM_SMI_DIV_DIVI_MASK (0xf << 12) ++#define CM_SMI_DIV_DIVI_OFFS (12) ++#define CM_SMI_DIV_DIVF_MASK (0xff << 4) ++#define CM_SMI_DIV_DIVF_OFFS (4) ++ ++/* SMI register mapping:*/ ++#define SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x600000) ++ ++#define SMICS 0x00 /* control + status register */ ++#define SMIL 0x04 /* length/count (n external txfers) */ ++#define SMIA 0x08 /* address register */ ++#define SMID 0x0c /* data register */ ++#define SMIDSR0 0x10 /* device 0 read settings */ ++#define SMIDSW0 0x14 /* device 0 write settings */ ++#define SMIDSR1 0x18 /* device 1 read settings */ ++#define SMIDSW1 0x1c /* device 1 write settings */ ++#define SMIDSR2 0x20 /* device 2 read settings */ ++#define SMIDSW2 0x24 /* device 2 write settings */ ++#define SMIDSR3 0x28 /* device 3 read settings */ ++#define SMIDSW3 0x2c /* device 3 write settings */ ++#define SMIDC 0x30 /* DMA control registers */ ++#define SMIDCS 0x34 /* direct control/status register */ ++#define SMIDA 0x38 /* direct address register */ ++#define SMIDD 0x3c /* direct data registers */ ++#define SMIFD 0x40 /* FIFO debug register */ ++ ++ ++ ++/* Control and Status register bits: ++ * SMICS_RXF : RX fifo full: 1 when RX fifo is full ++ * SMICS_TXE : TX fifo empty: 1 when empty. ++ * SMICS_RXD : RX fifo contains data: 1 when there is data. ++ * SMICS_TXD : TX fifo can accept data: 1 when true. ++ * SMICS_RXR : RX fifo needs reading: 1 when fifo more than 3/4 full, or ++ * when "DONE" and fifo not emptied. ++ * SMICS_TXW : TX fifo needs writing: 1 when less than 1/4 full. ++ * SMICS_AFERR : AXI FIFO error: 1 when fifo read when empty or written ++ * when full. Write 1 to clear. ++ * SMICS_EDREQ : 1 when external DREQ received. ++ * SMICS_PXLDAT : Pixel data: write 1 to enable pixel transfer modes. ++ * SMICS_SETERR : 1 if there was an error writing to setup regs (e.g. ++ * tx was in progress). Write 1 to clear. ++ * SMICS_PVMODE : Set to 1 to enable pixel valve mode. ++ * SMICS_INTR : Set to 1 to enable interrupt on RX. ++ * SMICS_INTT : Set to 1 to enable interrupt on TX. ++ * SMICS_INTD : Set to 1 to enable interrupt on DONE condition. ++ * SMICS_TEEN : Tear effect mode enabled: Programmed transfers will wait ++ * for a TE trigger before writing. ++ * SMICS_PAD1 : Padding settings for external transfers. For writes: the ++ * number of bytes initially written to the TX fifo that ++ * SMICS_PAD0 : should be ignored. For reads: the number of bytes that will ++ * be read before the data, and should be dropped. ++ * SMICS_WRITE : Transfer direction: 1 = write to external device, 0 = read ++ * SMICS_CLEAR : Write 1 to clear the FIFOs. ++ * SMICS_START : Write 1 to start the programmed transfer. ++ * SMICS_ACTIVE : Reads as 1 when a programmed transfer is underway. ++ * SMICS_DONE : Reads as 1 when transfer finished. For RX, not set until ++ * FIFO emptied. ++ * SMICS_ENABLE : Set to 1 to enable the SMI peripheral, 0 to disable. ++ */ ++ ++#define SMICS_RXF (1 << 31) ++#define SMICS_TXE (1 << 30) ++#define SMICS_RXD (1 << 29) ++#define SMICS_TXD (1 << 28) ++#define SMICS_RXR (1 << 27) ++#define SMICS_TXW (1 << 26) ++#define SMICS_AFERR (1 << 25) ++#define SMICS_EDREQ (1 << 15) ++#define SMICS_PXLDAT (1 << 14) ++#define SMICS_SETERR (1 << 13) ++#define SMICS_PVMODE (1 << 12) ++#define SMICS_INTR (1 << 11) ++#define SMICS_INTT (1 << 10) ++#define SMICS_INTD (1 << 9) ++#define SMICS_TEEN (1 << 8) ++#define SMICS_PAD1 (1 << 7) ++#define SMICS_PAD0 (1 << 6) ++#define SMICS_WRITE (1 << 5) ++#define SMICS_CLEAR (1 << 4) ++#define SMICS_START (1 << 3) ++#define SMICS_ACTIVE (1 << 2) ++#define SMICS_DONE (1 << 1) ++#define SMICS_ENABLE (1 << 0) ++ ++/* Address register bits: */ ++ ++#define SMIA_DEVICE_MASK ((1 << 9) | (1 << 8)) ++#define SMIA_DEVICE_OFFS (8) ++#define SMIA_ADDR_MASK (0x3f) /* bits 5 -> 0 */ ++#define SMIA_ADDR_OFFS (0) ++ ++/* DMA control register bits: ++ * SMIDC_DMAEN : DMA enable: set 1: DMA requests will be issued. ++ * SMIDC_DMAP : DMA passthrough: when set to 0, top two data pins are used by ++ * SMI as usual. When set to 1, the top two pins are used for ++ * external DREQs: pin 16 read request, 17 write. ++ * SMIDC_PANIC* : Threshold at which DMA will panic during read/write. ++ * SMIDC_REQ* : Threshold at which DMA will generate a DREQ. ++ */ ++ ++#define SMIDC_DMAEN (1 << 28) ++#define SMIDC_DMAP (1 << 24) ++#define SMIDC_PANICR_MASK (0x3f << 18) ++#define SMIDC_PANICR_OFFS (18) ++#define SMIDC_PANICW_MASK (0x3f << 12) ++#define SMIDC_PANICW_OFFS (12) ++#define SMIDC_REQR_MASK (0x3f << 6) ++#define SMIDC_REQR_OFFS (6) ++#define SMIDC_REQW_MASK (0x3f) ++#define SMIDC_REQW_OFFS (0) ++ ++/* Device settings register bits: same for all 4 (or 3?) device register sets. ++ * Device read settings: ++ * SMIDSR_RWIDTH : Read transfer width. 00 = 8bit, 01 = 16bit, ++ * 10 = 18bit, 11 = 9bit. ++ * SMIDSR_RSETUP : Read setup time: number of core cycles between chip ++ * select/address and read strobe. Min 1, max 64. ++ * SMIDSR_MODE68 : 1 for System 68 mode (i.e. enable + direction pins, ++ * rather than OE + WE pin) ++ * SMIDSR_FSETUP : If set to 1, setup time only applies to first ++ * transfer after address change. ++ * SMIDSR_RHOLD : Number of core cycles between read strobe going ++ * inactive and CS/address going inactive. Min 1, max 64 ++ * SMIDSR_RPACEALL : When set to 1, this device's RPACE value will always ++ * be used for the next transaction, even if it is not ++ * to this device. ++ * SMIDSR_RPACE : Number of core cycles spent waiting between CS ++ * deassert and start of next transfer. Min 1, max 128 ++ * SMIDSR_RDREQ : 1 = use external DMA request on SD16 to pace reads ++ * from device. Must also set DMAP in SMICS. ++ * SMIDSR_RSTROBE : Number of cycles to assert the read strobe. ++ * min 1, max 128. ++ */ ++#define SMIDSR_RWIDTH_MASK ((1<<31)|(1<<30)) ++#define SMIDSR_RWIDTH_OFFS (30) ++#define SMIDSR_RSETUP_MASK (0x3f << 24) ++#define SMIDSR_RSETUP_OFFS (24) ++#define SMIDSR_MODE68 (1 << 23) ++#define SMIDSR_FSETUP (1 << 22) ++#define SMIDSR_RHOLD_MASK (0x3f << 16) ++#define SMIDSR_RHOLD_OFFS (16) ++#define SMIDSR_RPACEALL (1 << 15) ++#define SMIDSR_RPACE_MASK (0x7f << 8) ++#define SMIDSR_RPACE_OFFS (8) ++#define SMIDSR_RDREQ (1 << 7) ++#define SMIDSR_RSTROBE_MASK (0x7f) ++#define SMIDSR_RSTROBE_OFFS (0) ++ ++/* Device write settings: ++ * SMIDSW_WWIDTH : Write transfer width. 00 = 8bit, 01 = 16bit, ++ * 10= 18bit, 11 = 9bit. ++ * SMIDSW_WSETUP : Number of cycles between CS assert and write strobe. ++ * Min 1, max 64. ++ * SMIDSW_WFORMAT : Pixel format of input. 0 = 16bit RGB 565, ++ * 1 = 32bit RGBA 8888 ++ * SMIDSW_WSWAP : 1 = swap pixel data bits. (Use with SMICS_PXLDAT) ++ * SMIDSW_WHOLD : Time between WE deassert and CS deassert. 1 to 64 ++ * SMIDSW_WPACEALL : 1: this device's WPACE will be used for the next ++ * transfer, regardless of that transfer's device. ++ * SMIDSW_WPACE : Cycles between CS deassert and next CS assert. ++ * Min 1, max 128 ++ * SMIDSW_WDREQ : Use external DREQ on pin 17 to pace writes. DMAP must ++ * be set in SMICS. ++ * SMIDSW_WSTROBE : Number of cycles to assert the write strobe. ++ * Min 1, max 128 ++ */ ++#define SMIDSW_WWIDTH_MASK ((1<<31)|(1<<30)) ++#define SMIDSW_WWIDTH_OFFS (30) ++#define SMIDSW_WSETUP_MASK (0x3f << 24) ++#define SMIDSW_WSETUP_OFFS (24) ++#define SMIDSW_WFORMAT (1 << 23) ++#define SMIDSW_WSWAP (1 << 22) ++#define SMIDSW_WHOLD_MASK (0x3f << 16) ++#define SMIDSW_WHOLD_OFFS (16) ++#define SMIDSW_WPACEALL (1 << 15) ++#define SMIDSW_WPACE_MASK (0x7f << 8) ++#define SMIDSW_WPACE_OFFS (8) ++#define SMIDSW_WDREQ (1 << 7) ++#define SMIDSW_WSTROBE_MASK (0x7f) ++#define SMIDSW_WSTROBE_OFFS (0) ++ ++/* Direct transfer control + status register ++ * SMIDCS_WRITE : Direction of transfer: 1 -> write, 0 -> read ++ * SMIDCS_DONE : 1 when a transfer has finished. Write 1 to clear. ++ * SMIDCS_START : Write 1 to start a transfer, if one is not already underway. ++ * SMIDCE_ENABLE: Write 1 to enable SMI in direct mode. ++ */ ++ ++#define SMIDCS_WRITE (1 << 3) ++#define SMIDCS_DONE (1 << 2) ++#define SMIDCS_START (1 << 1) ++#define SMIDCS_ENABLE (1 << 0) ++ ++/* Direct transfer address register ++ * SMIDA_DEVICE : Indicates which of the device settings banks should be used. ++ * SMIDA_ADDR : The value to be asserted on the address pins. ++ */ ++ ++#define SMIDA_DEVICE_MASK ((1<<9)|(1<<8)) ++#define SMIDA_DEVICE_OFFS (8) ++#define SMIDA_ADDR_MASK (0x3f) ++#define SMIDA_ADDR_OFFS (0) ++ ++/* FIFO debug register ++ * SMIFD_FLVL : The high-tide mark of FIFO count during the most recent txfer ++ * SMIFD_FCNT : The current FIFO count. ++ */ ++#define SMIFD_FLVL_MASK (0x3f << 8) ++#define SMIFD_FLVL_OFFS (8) ++#define SMIFD_FCNT_MASK (0x3f) ++#define SMIFD_FCNT_OFFS (0) ++ ++#endif /* BCM2835_SMI_IMPLEMENTATION */ ++ ++#endif /* BCM2835_SMI_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1042_aee26b0153f9f9d7660d03f2672e357760199996.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1042_aee26b0153f9f9d7660d03f2672e357760199996.patch --- linux-4.9.13/debian/patches/rpi/rpi_1042_aee26b0153f9f9d7660d03f2672e357760199996.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1042_aee26b0153f9f9d7660d03f2672e357760199996.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,169 @@ +commit aee26b0153f9f9d7660d03f2672e357760199996 +Author: Martin Sperl +Date: Tue Apr 26 14:59:21 2016 +0000 + + MISC: bcm2835: smi: use clock manager and fix reload issues + + Use clock manager instead of self-made clockmanager. + + Also fix some error paths that showd up during development + (especially missing release of dma resources on rmmod) + + Signed-off-by: Martin Sperl + +diff --git a/drivers/misc/bcm2835_smi.c b/drivers/misc/bcm2835_smi.c +index 63a4ea08b993..126154070312 100644 +--- a/drivers/misc/bcm2835_smi.c ++++ b/drivers/misc/bcm2835_smi.c +@@ -34,6 +34,7 @@ + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + ++#include + #include + #include + #include +@@ -62,7 +63,7 @@ + struct bcm2835_smi_instance { + struct device *dev; + struct smi_settings settings; +- __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; ++ __iomem void *smi_regs_ptr; + dma_addr_t smi_regs_busaddr; + + struct dma_chan *dma_chan; +@@ -72,8 +73,7 @@ struct bcm2835_smi_instance { + + struct scatterlist buffer_sgl; + +- int clock_source; +- int clock_divisor; ++ struct clk *clk; + + /* Sometimes we are called into in an atomic context (e.g. by + JFFS2 + MTD) so we can't use a mutex */ +@@ -82,42 +82,6 @@ struct bcm2835_smi_instance { + + /**************************************************************************** + * +-* SMI clock manager setup +-* +-***************************************************************************/ +- +-static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, +- u32 val, unsigned reg) +-{ +- writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); +-} +- +-static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, +- unsigned reg) +-{ +- return readl(inst->cm_smi_regs_ptr + reg); +-} +- +-static void smi_setup_clock(struct bcm2835_smi_instance *inst) +-{ +- dev_dbg(inst->dev, "Setting up clock..."); +- /* Disable SMI clock and wait for it to stop. */ +- write_smi_cm_reg(inst, 0, CM_SMI_CTL); +- while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) +- ; +- +- write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), +- CM_SMI_DIV); +- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), +- CM_SMI_CTL); +- +- /* Enable the clock */ +- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | +- CM_SMI_CTL_ENAB, CM_SMI_CTL); +-} +- +-/**************************************************************************** +-* + * SMI peripheral setup + * + ***************************************************************************/ +@@ -894,42 +858,40 @@ static int bcm2835_smi_probe(struct platform_device *pdev) + struct device_node *node = dev->of_node; + struct resource *ioresource; + struct bcm2835_smi_instance *inst; ++ const __be32 *addr; + ++ /* We require device tree support */ ++ if (!node) ++ return -EINVAL; + /* Allocate buffers and instance data */ +- + inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), + GFP_KERNEL); +- + if (!inst) + return -ENOMEM; + + inst->dev = dev; + spin_lock_init(&inst->transaction_lock); + +- /* We require device tree support */ +- if (!node) +- return -EINVAL; +- + ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); +- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); +- inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); +- inst->smi_regs_busaddr = be32_to_cpu( +- *of_get_address(node, 0, NULL, NULL)); +- of_property_read_u32(node, +- "brcm,smi-clock-source", +- &inst->clock_source); +- of_property_read_u32(node, +- "brcm,smi-clock-divisor", +- &inst->clock_divisor); ++ if (IS_ERR(inst->smi_regs_ptr)) { ++ err = PTR_ERR(inst->smi_regs_ptr); ++ goto err; ++ } ++ addr = of_get_address(node, 0, NULL, NULL); ++ inst->smi_regs_busaddr = be32_to_cpu(addr); + + err = bcm2835_smi_dma_setup(inst); + if (err) +- return err; ++ goto err; + +- /* Finally, do peripheral setup */ ++ /* request clock */ ++ inst->clk = devm_clk_get(dev, NULL); ++ if (!inst->clk) ++ goto err; ++ clk_prepare_enable(inst->clk); + +- smi_setup_clock(inst); ++ /* Finally, do peripheral setup */ + smi_setup_regs(inst); + + platform_set_drvdata(pdev, inst); +@@ -937,6 +899,9 @@ static int bcm2835_smi_probe(struct platform_device *pdev) + dev_info(inst->dev, "initialised"); + + return 0; ++err: ++ kfree(inst); ++ return err; + } + + /**************************************************************************** +@@ -950,6 +915,11 @@ static int bcm2835_smi_remove(struct platform_device *pdev) + struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); + struct device *dev = inst->dev; + ++ dmaengine_terminate_all(inst->dma_chan); ++ dma_release_channel(inst->dma_chan); ++ ++ clk_disable_unprepare(inst->clk); ++ + dev_info(dev, "SMI device removed - OK"); + return 0; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1043_e8b0c30a2b61faf628c3a4d5da505f637f4e209e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1043_e8b0c30a2b61faf628c3a4d5da505f637f4e209e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1043_e8b0c30a2b61faf628c3a4d5da505f637f4e209e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1043_e8b0c30a2b61faf628c3a4d5da505f637f4e209e.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,360 @@ +commit e8b0c30a2b61faf628c3a4d5da505f637f4e209e +Author: Luke Wren +Date: Sat Sep 5 01:16:10 2015 +0100 + + Add SMI NAND driver + + Signed-off-by: Luke Wren + +diff --git a/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt +new file mode 100644 +index 000000000000..159544d65790 +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt +@@ -0,0 +1,42 @@ ++* BCM2835 SMI NAND flash ++ ++This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for ++talking to parallel register interfaces) and Linux's MTD layer. ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi-nand" ++- status: "okay" ++ ++Optional properties: ++- partition@n, where n is an integer from a consecutive sequence starting at 0 ++ - Difficult to store partition table on NAND device - normally put it ++ in the source code, kernel bootparams, or device tree (the best way!) ++ - Sub-properties: ++ - label: the partition name, as shown by mtdinfo /dev/mtd* ++ - reg: the size and offset of this partition. ++ - (optional) read-only: an empty property flagging as read only ++ ++Example: ++ ++nand: flash@0 { ++ compatible = "brcm,bcm2835-smi-nand"; ++ status = "okay"; ++ ++ partition@0 { ++ label = "stage2"; ++ // 128k ++ reg = <0 0x20000>; ++ read-only; ++ }; ++ partition@1 { ++ label = "firmware"; ++ // 16M ++ reg = <0x20000 0x1000000>; ++ read-only; ++ }; ++ partition@2 { ++ label = "root"; ++ // 2G ++ reg = <0x1020000 0x80000000>; ++ }; ++}; +\ No newline at end of file +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index b254090b8a1b..f21097c8d537 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -41,6 +41,13 @@ config MTD_SM_COMMON + tristate + default n + ++config MTD_NAND_BCM2835_SMI ++ tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)" ++ depends on BCM2835_SMI ++ default m ++ help ++ Uses the BCM2835's SMI peripheral as a NAND controller. ++ + config MTD_NAND_DENALI + tristate + +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index cafde6f3d957..d399ab9c9235 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o + obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o + obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o ++obj-$(CONFIG_MTD_NAND_BCM2835_SMI) += bcm2835_smi_nand.o + obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o + obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o + obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o +diff --git a/drivers/mtd/nand/bcm2835_smi_nand.c b/drivers/mtd/nand/bcm2835_smi_nand.c +new file mode 100644 +index 000000000000..02adda6da18b +--- /dev/null ++++ b/drivers/mtd/nand/bcm2835_smi_nand.c +@@ -0,0 +1,267 @@ ++/** ++ * NAND flash driver for Broadcom Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DEVICE_NAME "bcm2835-smi-nand" ++#define DRIVER_NAME "smi-nand-bcm2835" ++ ++struct bcm2835_smi_nand_host { ++ struct bcm2835_smi_instance *smi_inst; ++ struct nand_chip nand_chip; ++ struct mtd_info mtd; ++ struct device *dev; ++}; ++ ++/**************************************************************************** ++* ++* NAND functionality implementation ++* ++****************************************************************************/ ++ ++#define SMI_NAND_CLE_PIN 0x01 ++#define SMI_NAND_ALE_PIN 0x02 ++ ++static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) ++{ ++ uint32_t cmd32 = cmd; ++ uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ if (ctrl & NAND_CLE) ++ addr |= SMI_NAND_CLE_PIN; ++ if (ctrl & NAND_ALE) ++ addr |= SMI_NAND_ALE_PIN; ++ /* Lower ALL the CS pins! */ ++ if (ctrl & NAND_NCE) ++ addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); ++ ++ bcm2835_smi_set_address(inst, addr); ++ ++ if (cmd != NAND_CMD_NONE) ++ bcm2835_smi_write_buf(inst, &cmd32, 1); ++} ++ ++static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd) ++{ ++ uint8_t byte; ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_read_buf(inst, &byte, 1); ++ return byte; ++} ++ ++static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd, ++ uint8_t byte) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_write_buf(inst, &byte, 1); ++} ++ ++static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd, ++ const uint8_t *buf, int len) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_write_buf(inst, buf, len); ++} ++ ++static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd, ++ uint8_t *buf, int len) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_read_buf(inst, buf, len); ++} ++ ++/**************************************************************************** ++* ++* Probe and remove functions ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_nand_probe(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_nand_host *host; ++ struct nand_chip *this; ++ struct mtd_info *mtd; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node, *smi_node; ++ struct mtd_part_parser_data ppdata; ++ struct smi_settings *smi_settings; ++ struct bcm2835_smi_instance *smi_inst; ++ int ret = -ENXIO; ++ ++ if (!node) { ++ dev_err(dev, "No device tree node supplied!"); ++ return -EINVAL; ++ } ++ ++ smi_node = of_parse_phandle(node, "smi_handle", 0); ++ ++ /* Request use of SMI peripheral: */ ++ smi_inst = bcm2835_smi_get(smi_node); ++ ++ if (!smi_inst) { ++ dev_err(dev, "Could not register with SMI."); ++ return -EPROBE_DEFER; ++ } ++ ++ /* Set SMI timing and bus width */ ++ ++ smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ ++ smi_settings->data_width = SMI_WIDTH_8BIT; ++ smi_settings->read_setup_time = 2; ++ smi_settings->read_hold_time = 1; ++ smi_settings->read_pace_time = 1; ++ smi_settings->read_strobe_time = 3; ++ ++ smi_settings->write_setup_time = 2; ++ smi_settings->write_hold_time = 1; ++ smi_settings->write_pace_time = 1; ++ smi_settings->write_strobe_time = 3; ++ ++ bcm2835_smi_set_regs_from_settings(smi_inst); ++ ++ host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host), ++ GFP_KERNEL); ++ if (!host) ++ return -ENOMEM; ++ ++ host->dev = dev; ++ host->smi_inst = smi_inst; ++ ++ platform_set_drvdata(pdev, host); ++ ++ /* Link the structures together */ ++ ++ this = &host->nand_chip; ++ mtd = &host->mtd; ++ mtd->priv = this; ++ mtd->owner = THIS_MODULE; ++ mtd->dev.parent = dev; ++ mtd->name = DRIVER_NAME; ++ ++ /* 20 us command delay time... */ ++ this->chip_delay = 20; ++ ++ this->priv = host; ++ this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl; ++ this->read_byte = bcm2835_smi_nand_read_byte; ++ this->write_byte = bcm2835_smi_nand_write_byte; ++ this->write_buf = bcm2835_smi_nand_write_buf; ++ this->read_buf = bcm2835_smi_nand_read_buf; ++ ++ this->ecc.mode = NAND_ECC_SOFT; ++ ++ /* Should never be accessed directly: */ ++ ++ this->IO_ADDR_R = (void *)0xdeadbeef; ++ this->IO_ADDR_W = (void *)0xdeadbeef; ++ ++ /* First scan to find the device and get the page size */ ++ ++ if (nand_scan_ident(mtd, 1, NULL)) ++ return -ENXIO; ++ ++ /* Second phase scan */ ++ ++ if (nand_scan_tail(mtd)) ++ return -ENXIO; ++ ++ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); ++ if (!ret) ++ return 0; ++ ++ nand_release(mtd); ++ return -EINVAL; ++} ++ ++static int bcm2835_smi_nand_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev); ++ ++ nand_release(&host->mtd); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_nand_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi-nand",}, ++ { /* sentinel */ } ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match); ++ ++static struct platform_driver bcm2835_smi_nand_driver = { ++ .probe = bcm2835_smi_nand_probe, ++ .remove = bcm2835_smi_nand_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_nand_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_nand_driver); ++ ++MODULE_ALIAS("platform:smi-nand-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION ++ ("Driver for NAND chips using Broadcom Secondary Memory Interface"); ++MODULE_AUTHOR("Luke Wren "); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1044_dadefc9616f52424817c04237c38cefe39868dd8.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1044_dadefc9616f52424817c04237c38cefe39868dd8.patch --- linux-4.9.13/debian/patches/rpi/rpi_1044_dadefc9616f52424817c04237c38cefe39868dd8.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1044_dadefc9616f52424817c04237c38cefe39868dd8.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,858 @@ +commit dadefc9616f52424817c04237c38cefe39868dd8 +Author: Aron Szabo +Date: Sat Jun 16 12:15:55 2012 +0200 + + lirc: added support for RaspberryPi GPIO + + lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others + See: https://github.com/raspberrypi/linux/issues/525 + + lirc: Remove restriction on gpio pins that can be used with lirc + + Compute Module, for example could use different pins + + lirc_rpi: Add parameter to specify input pin pull + + Depending on the connected IR circuitry it might be desirable to change the + gpios internal pull from it pull-down default behaviour. Add a module + parameter to allow the user to set it explicitly. + + Signed-off-by: Julian Scheel + + lirc-rpi: Use the higher-level irq control functions + + This module used to access the irq_chip methods of the + gpio controller directly, rather than going through the + standard enable_irq/irq_set_irq_type functions. This + caused problems on pinctrl-bcm2835 which only implements + the irq_enable/disable methods and not irq_unmask/mask. + + lirc-rpi: Correct the interrupt usage + + 1) Correct the use of enable_irq (i.e. don't call it so often) + 2) Correct the shutdown sequence. + 3) Avoid a bcm2708_gpio driver quirk by setting the irq flags earlier + + lirc-rpi: use getnstimeofday instead of read_current_timer + + read_current_timer isn't guaranteed to return values in + microseconds, and indeed it doesn't on a Pi2. + + Issue: linux#827 + + lirc-rpi: Add device tree support, and a suitable overlay + + The overlay supports DT parameters that match the old module + parameters, except that gpio_in_pull should be set using the + strings "up", "down" or "off". + + lirc-rpi: Also support pinctrl-bcm2835 in non-DT mode + + fix auto-sense in lirc_rpi driver + + On a Raspberry Pi 2, the lirc_rpi driver might receive spurious + interrupts and change it's low-active / high-active setting. + When this happens, the IR remote control stops working. + + This patch disables this auto-detection if the 'sense' parameter + was set in the device tree, making the driver robust to such + spurious interrupts. + +diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig +index 6879c4651b46..77c69f2d4158 100644 +--- a/drivers/staging/media/lirc/Kconfig ++++ b/drivers/staging/media/lirc/Kconfig +@@ -32,6 +32,12 @@ config LIRC_PARALLEL + help + Driver for Homebrew Parallel Port Receivers + ++config LIRC_RPI ++ tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi" ++ depends on LIRC ++ help ++ Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi ++ + config LIRC_SASEM + tristate "Sasem USB IR Remote" + depends on LIRC && USB +diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile +index 5430adf0475d..9e53cd0caf58 100644 +--- a/drivers/staging/media/lirc/Makefile ++++ b/drivers/staging/media/lirc/Makefile +@@ -6,6 +6,7 @@ + obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o + obj-$(CONFIG_LIRC_IMON) += lirc_imon.o + obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o ++obj-$(CONFIG_LIRC_RPI) += lirc_rpi.o + obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o + obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o + obj-$(CONFIG_LIRC_SIR) += lirc_sir.o +diff --git a/drivers/staging/media/lirc/lirc_rpi.c b/drivers/staging/media/lirc/lirc_rpi.c +new file mode 100644 +index 000000000000..61328968d215 +--- /dev/null ++++ b/drivers/staging/media/lirc/lirc_rpi.c +@@ -0,0 +1,734 @@ ++/* ++ * lirc_rpi.c ++ * ++ * lirc_rpi - Device driver that records pulse- and pause-lengths ++ * (space-lengths) (just like the lirc_serial driver does) ++ * between GPIO interrupt events on the Raspberry Pi. ++ * Lots of code has been taken from the lirc_serial module, ++ * so I would like say thanks to the authors. ++ * ++ * Copyright (C) 2012 Aron Robert Szabo , ++ * Michael Bishop ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define LIRC_DRIVER_NAME "lirc_rpi" ++#define RBUF_LEN 256 ++#define LIRC_TRANSMITTER_LATENCY 50 ++ ++#ifndef MAX_UDELAY_MS ++#define MAX_UDELAY_US 5000 ++#else ++#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) ++#endif ++ ++#define dprintk(fmt, args...) \ ++ do { \ ++ if (debug) \ ++ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ ++ fmt, ## args); \ ++ } while (0) ++ ++/* module parameters */ ++ ++/* set the default GPIO input pin */ ++static int gpio_in_pin = 18; ++/* set the default pull behaviour for input pin */ ++static int gpio_in_pull = BCM2708_PULL_DOWN; ++/* set the default GPIO output pin */ ++static int gpio_out_pin = 17; ++/* enable debugging messages */ ++static bool debug; ++/* -1 = auto, 0 = active high, 1 = active low */ ++static int sense = -1; ++/* use softcarrier by default */ ++static bool softcarrier = 1; ++/* 0 = do not invert output, 1 = invert output */ ++static bool invert = 0; ++ ++struct gpio_chip *gpiochip; ++static int irq_num; ++static int auto_sense = 1; ++ ++/* forward declarations */ ++static long send_pulse(unsigned long length); ++static void send_space(long length); ++static void lirc_rpi_exit(void); ++ ++static struct platform_device *lirc_rpi_dev; ++static struct timeval lasttv = { 0, 0 }; ++static struct lirc_buffer rbuf; ++static spinlock_t lock; ++ ++/* initialized/set in init_timing_params() */ ++static unsigned int freq = 38000; ++static unsigned int duty_cycle = 50; ++static unsigned long period; ++static unsigned long pulse_width; ++static unsigned long space_width; ++ ++static void safe_udelay(unsigned long usecs) ++{ ++ while (usecs > MAX_UDELAY_US) { ++ udelay(MAX_UDELAY_US); ++ usecs -= MAX_UDELAY_US; ++ } ++ udelay(usecs); ++} ++ ++static unsigned long read_current_us(void) ++{ ++ struct timespec now; ++ getnstimeofday(&now); ++ return (now.tv_sec * 1000000) + (now.tv_nsec/1000); ++} ++ ++static int init_timing_params(unsigned int new_duty_cycle, ++ unsigned int new_freq) ++{ ++ if (1000 * 1000000L / new_freq * new_duty_cycle / 100 <= ++ LIRC_TRANSMITTER_LATENCY) ++ return -EINVAL; ++ if (1000 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <= ++ LIRC_TRANSMITTER_LATENCY) ++ return -EINVAL; ++ duty_cycle = new_duty_cycle; ++ freq = new_freq; ++ period = 1000 * 1000000L / freq; ++ pulse_width = period * duty_cycle / 100; ++ space_width = period - pulse_width; ++ dprintk("in init_timing_params, freq=%d pulse=%ld, " ++ "space=%ld\n", freq, pulse_width, space_width); ++ return 0; ++} ++ ++static long send_pulse_softcarrier(unsigned long length) ++{ ++ int flag; ++ unsigned long actual, target; ++ unsigned long actual_us, initial_us, target_us; ++ ++ length *= 1000; ++ ++ actual = 0; target = 0; flag = 0; ++ actual_us = read_current_us(); ++ ++ while (actual < length) { ++ if (flag) { ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ target += space_width; ++ } else { ++ gpiochip->set(gpiochip, gpio_out_pin, !invert); ++ target += pulse_width; ++ } ++ initial_us = actual_us; ++ target_us = actual_us + (target - actual) / 1000; ++ /* ++ * Note - we've checked in ioctl that the pulse/space ++ * widths are big enough so that d is > 0 ++ */ ++ if ((int)(target_us - actual_us) > 0) ++ udelay(target_us - actual_us); ++ actual_us = read_current_us(); ++ actual += (actual_us - initial_us) * 1000; ++ flag = !flag; ++ } ++ return (actual-length) / 1000; ++} ++ ++static long send_pulse(unsigned long length) ++{ ++ if (length <= 0) ++ return 0; ++ ++ if (softcarrier) { ++ return send_pulse_softcarrier(length); ++ } else { ++ gpiochip->set(gpiochip, gpio_out_pin, !invert); ++ safe_udelay(length); ++ return 0; ++ } ++} ++ ++static void send_space(long length) ++{ ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ if (length <= 0) ++ return; ++ safe_udelay(length); ++} ++ ++static void rbwrite(int l) ++{ ++ if (lirc_buffer_full(&rbuf)) { ++ /* no new signals will be accepted */ ++ dprintk("Buffer overrun\n"); ++ return; ++ } ++ lirc_buffer_write(&rbuf, (void *)&l); ++} ++ ++static void frbwrite(int l) ++{ ++ /* simple noise filter */ ++ static int pulse, space; ++ static unsigned int ptr; ++ ++ if (ptr > 0 && (l & PULSE_BIT)) { ++ pulse += l & PULSE_MASK; ++ if (pulse > 250) { ++ rbwrite(space); ++ rbwrite(pulse | PULSE_BIT); ++ ptr = 0; ++ pulse = 0; ++ } ++ return; ++ } ++ if (!(l & PULSE_BIT)) { ++ if (ptr == 0) { ++ if (l > 20000) { ++ space = l; ++ ptr++; ++ return; ++ } ++ } else { ++ if (l > 20000) { ++ space += pulse; ++ if (space > PULSE_MASK) ++ space = PULSE_MASK; ++ space += l; ++ if (space > PULSE_MASK) ++ space = PULSE_MASK; ++ pulse = 0; ++ return; ++ } ++ rbwrite(space); ++ rbwrite(pulse | PULSE_BIT); ++ ptr = 0; ++ pulse = 0; ++ } ++ } ++ rbwrite(l); ++} ++ ++static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs) ++{ ++ struct timeval tv; ++ long deltv; ++ int data; ++ int signal; ++ ++ /* use the GPIO signal level */ ++ signal = gpiochip->get(gpiochip, gpio_in_pin); ++ ++ if (sense != -1) { ++ /* get current time */ ++ do_gettimeofday(&tv); ++ ++ /* calc time since last interrupt in microseconds */ ++ deltv = tv.tv_sec-lasttv.tv_sec; ++ if (tv.tv_sec < lasttv.tv_sec || ++ (tv.tv_sec == lasttv.tv_sec && ++ tv.tv_usec < lasttv.tv_usec)) { ++ printk(KERN_WARNING LIRC_DRIVER_NAME ++ ": AIEEEE: your clock just jumped backwards\n"); ++ printk(KERN_WARNING LIRC_DRIVER_NAME ++ ": %d %d %lx %lx %lx %lx\n", signal, sense, ++ tv.tv_sec, lasttv.tv_sec, ++ tv.tv_usec, lasttv.tv_usec); ++ data = PULSE_MASK; ++ } else if (deltv > 15) { ++ data = PULSE_MASK; /* really long time */ ++ if (!(signal^sense)) { ++ /* sanity check */ ++ printk(KERN_DEBUG LIRC_DRIVER_NAME ++ ": AIEEEE: %d %d %lx %lx %lx %lx\n", ++ signal, sense, tv.tv_sec, lasttv.tv_sec, ++ tv.tv_usec, lasttv.tv_usec); ++ /* ++ * detecting pulse while this ++ * MUST be a space! ++ */ ++ if (auto_sense) { ++ sense = sense ? 0 : 1; ++ } ++ } ++ } else { ++ data = (int) (deltv*1000000 + ++ (tv.tv_usec - lasttv.tv_usec)); ++ } ++ frbwrite(signal^sense ? data : (data|PULSE_BIT)); ++ lasttv = tv; ++ wake_up_interruptible(&rbuf.wait_poll); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int is_right_chip(struct gpio_chip *chip, void *data) ++{ ++ dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label)); ++ ++ if (strcmp(data, chip->label) == 0) ++ return 1; ++ return 0; ++} ++ ++static inline int read_bool_property(const struct device_node *np, ++ const char *propname, ++ bool *out_value) ++{ ++ u32 value = 0; ++ int err = of_property_read_u32(np, propname, &value); ++ if (err == 0) ++ *out_value = (value != 0); ++ return err; ++} ++ ++static void read_pin_settings(struct device_node *node) ++{ ++ u32 pin; ++ int index; ++ ++ for (index = 0; ++ of_property_read_u32_index( ++ node, ++ "brcm,pins", ++ index, ++ &pin) == 0; ++ index++) { ++ u32 function; ++ int err; ++ err = of_property_read_u32_index( ++ node, ++ "brcm,function", ++ index, ++ &function); ++ if (err == 0) { ++ if (function == 1) /* Output */ ++ gpio_out_pin = pin; ++ else if (function == 0) /* Input */ ++ gpio_in_pin = pin; ++ } ++ } ++} ++ ++static int init_port(void) ++{ ++ int i, nlow, nhigh; ++ struct device_node *node; ++ ++ node = lirc_rpi_dev->dev.of_node; ++ ++ gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip); ++ ++ /* ++ * Because of the lack of a setpull function, only support ++ * pinctrl-bcm2835 if using device tree. ++ */ ++ if (!gpiochip && node) ++ gpiochip = gpiochip_find("pinctrl-bcm2835", is_right_chip); ++ ++ if (!gpiochip) { ++ pr_err(LIRC_DRIVER_NAME ": gpio chip not found!\n"); ++ return -ENODEV; ++ } ++ ++ if (node) { ++ struct device_node *pins_node; ++ ++ pins_node = of_parse_phandle(node, "pinctrl-0", 0); ++ if (!pins_node) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": pinctrl settings not found!\n"); ++ return -EINVAL; ++ } ++ ++ read_pin_settings(pins_node); ++ ++ of_property_read_u32(node, "rpi,sense", &sense); ++ ++ read_bool_property(node, "rpi,softcarrier", &softcarrier); ++ ++ read_bool_property(node, "rpi,invert", &invert); ++ ++ read_bool_property(node, "rpi,debug", &debug); ++ ++ } else { ++ return -EINVAL; ++ } ++ ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ ++ irq_num = gpiochip->to_irq(gpiochip, gpio_in_pin); ++ dprintk("to_irq %d\n", irq_num); ++ ++ /* if pin is high, then this must be an active low receiver. */ ++ if (sense == -1) { ++ /* wait 1/2 sec for the power supply */ ++ msleep(500); ++ ++ /* ++ * probe 9 times every 0.04s, collect "votes" for ++ * active high/low ++ */ ++ nlow = 0; ++ nhigh = 0; ++ for (i = 0; i < 9; i++) { ++ if (gpiochip->get(gpiochip, gpio_in_pin)) ++ nlow++; ++ else ++ nhigh++; ++ msleep(40); ++ } ++ sense = (nlow >= nhigh ? 1 : 0); ++ printk(KERN_INFO LIRC_DRIVER_NAME ++ ": auto-detected active %s receiver on GPIO pin %d\n", ++ sense ? "low" : "high", gpio_in_pin); ++ } else { ++ printk(KERN_INFO LIRC_DRIVER_NAME ++ ": manually using active %s receiver on GPIO pin %d\n", ++ sense ? "low" : "high", gpio_in_pin); ++ auto_sense = 0; ++ } ++ ++ return 0; ++} ++ ++// called when the character device is opened ++static int set_use_inc(void *data) ++{ ++ int result; ++ ++ /* initialize timestamp */ ++ do_gettimeofday(&lasttv); ++ ++ result = request_irq(irq_num, ++ (irq_handler_t) irq_handler, ++ IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, ++ LIRC_DRIVER_NAME, (void*) 0); ++ ++ switch (result) { ++ case -EBUSY: ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": IRQ %d is busy\n", ++ irq_num); ++ return -EBUSY; ++ case -EINVAL: ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": Bad irq number or handler\n"); ++ return -EINVAL; ++ default: ++ dprintk("Interrupt %d obtained\n", ++ irq_num); ++ break; ++ }; ++ ++ /* initialize pulse/space widths */ ++ init_timing_params(duty_cycle, freq); ++ ++ return 0; ++} ++ ++static void set_use_dec(void *data) ++{ ++ /* GPIO Pin Falling/Rising Edge Detect Disable */ ++ irq_set_irq_type(irq_num, 0); ++ disable_irq(irq_num); ++ ++ free_irq(irq_num, (void *) 0); ++ ++ dprintk(KERN_INFO LIRC_DRIVER_NAME ++ ": freed IRQ %d\n", irq_num); ++} ++ ++static ssize_t lirc_write(struct file *file, const char *buf, ++ size_t n, loff_t *ppos) ++{ ++ int i, count; ++ unsigned long flags; ++ long delta = 0; ++ int *wbuf; ++ ++ count = n / sizeof(int); ++ if (n % sizeof(int) || count % 2 == 0) ++ return -EINVAL; ++ wbuf = memdup_user(buf, n); ++ if (IS_ERR(wbuf)) ++ return PTR_ERR(wbuf); ++ spin_lock_irqsave(&lock, flags); ++ ++ for (i = 0; i < count; i++) { ++ if (i%2) ++ send_space(wbuf[i] - delta); ++ else ++ delta = send_pulse(wbuf[i]); ++ } ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ ++ spin_unlock_irqrestore(&lock, flags); ++ kfree(wbuf); ++ return n; ++} ++ ++static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) ++{ ++ int result; ++ __u32 value; ++ ++ switch (cmd) { ++ case LIRC_GET_SEND_MODE: ++ return -ENOIOCTLCMD; ++ break; ++ ++ case LIRC_SET_SEND_MODE: ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ /* only LIRC_MODE_PULSE supported */ ++ if (value != LIRC_MODE_PULSE) ++ return -ENOSYS; ++ break; ++ ++ case LIRC_GET_LENGTH: ++ return -ENOSYS; ++ break; ++ ++ case LIRC_SET_SEND_DUTY_CYCLE: ++ dprintk("SET_SEND_DUTY_CYCLE\n"); ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ if (value <= 0 || value > 100) ++ return -EINVAL; ++ return init_timing_params(value, freq); ++ break; ++ ++ case LIRC_SET_SEND_CARRIER: ++ dprintk("SET_SEND_CARRIER\n"); ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ if (value > 500000 || value < 20000) ++ return -EINVAL; ++ return init_timing_params(duty_cycle, value); ++ break; ++ ++ default: ++ return lirc_dev_fop_ioctl(filep, cmd, arg); ++ } ++ return 0; ++} ++ ++static const struct file_operations lirc_fops = { ++ .owner = THIS_MODULE, ++ .write = lirc_write, ++ .unlocked_ioctl = lirc_ioctl, ++ .read = lirc_dev_fop_read, ++ .poll = lirc_dev_fop_poll, ++ .open = lirc_dev_fop_open, ++ .release = lirc_dev_fop_close, ++ .llseek = no_llseek, ++}; ++ ++static struct lirc_driver driver = { ++ .name = LIRC_DRIVER_NAME, ++ .minor = -1, ++ .code_length = 1, ++ .sample_rate = 0, ++ .data = NULL, ++ .add_to_buf = NULL, ++ .rbuf = &rbuf, ++ .set_use_inc = set_use_inc, ++ .set_use_dec = set_use_dec, ++ .fops = &lirc_fops, ++ .dev = NULL, ++ .owner = THIS_MODULE, ++}; ++ ++static const struct of_device_id lirc_rpi_of_match[] = { ++ { .compatible = "rpi,lirc-rpi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lirc_rpi_of_match); ++ ++static struct platform_driver lirc_rpi_driver = { ++ .driver = { ++ .name = LIRC_DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(lirc_rpi_of_match), ++ }, ++}; ++ ++static int __init lirc_rpi_init(void) ++{ ++ struct device_node *node; ++ int result; ++ ++ /* Init read buffer. */ ++ result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN); ++ if (result < 0) ++ return -ENOMEM; ++ ++ result = platform_driver_register(&lirc_rpi_driver); ++ if (result) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": lirc register returned %d\n", result); ++ goto exit_buffer_free; ++ } ++ ++ node = of_find_compatible_node(NULL, NULL, ++ lirc_rpi_of_match[0].compatible); ++ ++ if (node) { ++ /* DT-enabled */ ++ lirc_rpi_dev = of_find_device_by_node(node); ++ WARN_ON(lirc_rpi_dev->dev.of_node != node); ++ of_node_put(node); ++ } ++ else { ++ lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0); ++ if (!lirc_rpi_dev) { ++ result = -ENOMEM; ++ goto exit_driver_unregister; ++ } ++ ++ result = platform_device_add(lirc_rpi_dev); ++ if (result) ++ goto exit_device_put; ++ } ++ ++ return 0; ++ ++ exit_device_put: ++ platform_device_put(lirc_rpi_dev); ++ ++ exit_driver_unregister: ++ platform_driver_unregister(&lirc_rpi_driver); ++ ++ exit_buffer_free: ++ lirc_buffer_free(&rbuf); ++ ++ return result; ++} ++ ++static void lirc_rpi_exit(void) ++{ ++ if (!lirc_rpi_dev->dev.of_node) ++ platform_device_unregister(lirc_rpi_dev); ++ platform_driver_unregister(&lirc_rpi_driver); ++ lirc_buffer_free(&rbuf); ++} ++ ++static int __init lirc_rpi_init_module(void) ++{ ++ int result; ++ ++ result = lirc_rpi_init(); ++ if (result) ++ return result; ++ ++ result = init_port(); ++ if (result < 0) ++ goto exit_rpi; ++ ++ driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE | ++ LIRC_CAN_SET_SEND_CARRIER | ++ LIRC_CAN_SEND_PULSE | ++ LIRC_CAN_REC_MODE2; ++ ++ driver.dev = &lirc_rpi_dev->dev; ++ driver.minor = lirc_register_driver(&driver); ++ ++ if (driver.minor < 0) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": device registration failed with %d\n", result); ++ result = -EIO; ++ goto exit_rpi; ++ } ++ ++ printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n"); ++ ++ return 0; ++ ++ exit_rpi: ++ lirc_rpi_exit(); ++ ++ return result; ++} ++ ++static void __exit lirc_rpi_exit_module(void) ++{ ++ lirc_unregister_driver(driver.minor); ++ ++ gpio_free(gpio_out_pin); ++ gpio_free(gpio_in_pin); ++ ++ lirc_rpi_exit(); ++ ++ printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n"); ++} ++ ++module_init(lirc_rpi_init_module); ++module_exit(lirc_rpi_exit_module); ++ ++MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO."); ++MODULE_AUTHOR("Aron Robert Szabo "); ++MODULE_AUTHOR("Michael Bishop "); ++MODULE_LICENSE("GPL"); ++ ++module_param(gpio_out_pin, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM" ++ " processor. (default 17"); ++ ++module_param(gpio_in_pin, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor." ++ " (default 18"); ++ ++module_param(gpio_in_pull, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_in_pull, "GPIO input pin pull configuration." ++ " (0 = off, 1 = up, 2 = down, default down)"); ++ ++module_param(sense, int, S_IRUGO); ++MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" ++ " (0 = active high, 1 = active low )"); ++ ++module_param(softcarrier, bool, S_IRUGO); ++MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)"); ++ ++module_param(invert, bool, S_IRUGO); ++MODULE_PARM_DESC(invert, "Invert output (0 = off, 1 = on, default off"); ++ ++module_param(debug, bool, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(debug, "Enable debugging messages"); +diff --git a/include/linux/platform_data/bcm2708.h b/include/linux/platform_data/bcm2708.h +new file mode 100644 +index 000000000000..fb69624ccef0 +--- /dev/null ++++ b/include/linux/platform_data/bcm2708.h +@@ -0,0 +1,23 @@ ++/* ++ * include/linux/platform_data/bcm2708.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * (C) 2014 Julian Scheel ++ * ++ */ ++#ifndef __BCM2708_H_ ++#define __BCM2708_H_ ++ ++typedef enum { ++ BCM2708_PULL_OFF, ++ BCM2708_PULL_UP, ++ BCM2708_PULL_DOWN ++} bcm2708_gpio_pull_t; ++ ++extern int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset, ++ bcm2708_gpio_pull_t value); ++ ++#endif diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1045_e4e1014e42566cbdaaa21e5b2bba15106efb2b6f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1045_e4e1014e42566cbdaaa21e5b2bba15106efb2b6f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1045_e4e1014e42566cbdaaa21e5b2bba15106efb2b6f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1045_e4e1014e42566cbdaaa21e5b2bba15106efb2b6f.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,264 @@ +commit e4e1014e42566cbdaaa21e5b2bba15106efb2b6f +Author: popcornmix +Date: Wed Jul 3 00:49:20 2013 +0100 + + Add cpufreq driver + + Signed-off-by: popcornmix + +diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm +index d89b8afe23b6..465c727bb3ba 100644 +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -220,6 +220,15 @@ config ARM_STI_CPUFREQ + this config option if you wish to add CPUFreq support for STi based + SoCs. + ++config ARM_BCM2835_CPUFREQ ++ depends on RASPBERRYPI_FIRMWARE ++ bool "BCM2835 Driver" ++ default y ++ help ++ This adds the CPUFreq driver for BCM2835 ++ ++ If in doubt, say N. ++ + config ARM_TEGRA20_CPUFREQ + bool "Tegra20 CPUFreq support" + depends on ARCH_TEGRA +diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile +index 0a9b6a093646..92a628a670c1 100644 +--- a/drivers/cpufreq/Makefile ++++ b/drivers/cpufreq/Makefile +@@ -75,6 +75,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o + obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o + obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o + obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o ++obj-$(CONFIG_ARM_BCM2835_CPUFREQ) += bcm2835-cpufreq.o + obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o + obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o + obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o +diff --git a/drivers/cpufreq/bcm2835-cpufreq.c b/drivers/cpufreq/bcm2835-cpufreq.c +new file mode 100644 +index 000000000000..414fbdc10dfb +--- /dev/null ++++ b/drivers/cpufreq/bcm2835-cpufreq.c +@@ -0,0 +1,218 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/***************************************************************************** ++* FILENAME: bcm2835-cpufreq.h ++* DESCRIPTION: This driver dynamically manages the CPU Frequency of the ARM ++* processor. Messages are sent to Videocore either setting or requesting the ++* frequency of the ARM in order to match an appropiate frequency to the current ++* usage of the processor. The policy which selects the frequency to use is ++* defined in the kernel .config file, but can be changed during runtime. ++*****************************************************************************/ ++ ++/* ---------- INCLUDES ---------- */ ++#include ++#include ++#include ++#include ++#include ++ ++/* ---------- DEFINES ---------- */ ++/*#define CPUFREQ_DEBUG_ENABLE*/ /* enable debugging */ ++#define MODULE_NAME "bcm2835-cpufreq" ++ ++#define VCMSG_ID_ARM_CLOCK 0x000000003 /* Clock/Voltage ID's */ ++ ++/* debug printk macros */ ++#ifdef CPUFREQ_DEBUG_ENABLE ++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) ++#else ++#define print_debug(fmt,...) ++#endif ++#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__) ++#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__) ++ ++/* ---------- GLOBALS ---------- */ ++static struct cpufreq_driver bcm2835_cpufreq_driver; /* the cpufreq driver global */ ++static unsigned int min_frequency, max_frequency; ++static struct cpufreq_frequency_table bcm2835_freq_table[3]; ++ ++/* ++ =============================================== ++ clk_rate either gets or sets the clock rates. ++ =============================================== ++*/ ++ ++static int bcm2835_cpufreq_clock_property(u32 tag, u32 id, u32 *val) ++{ ++ struct rpi_firmware *fw = rpi_firmware_get(NULL); ++ struct { ++ u32 id; ++ u32 val; ++ } packet; ++ int ret; ++ ++ packet.id = id; ++ packet.val = *val; ++ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); ++ if (ret) ++ return ret; ++ ++ *val = packet.val; ++ ++ return 0; ++} ++ ++static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate) ++{ ++ u32 rate = arm_rate * 1000; ++ int ret; ++ ++ ret = bcm2835_cpufreq_clock_property(RPI_FIRMWARE_SET_CLOCK_RATE, VCMSG_ID_ARM_CLOCK, &rate); ++ if (ret) { ++ print_err("Failed to set clock: %d (%d)\n", arm_rate, ret); ++ return 0; ++ } ++ ++ rate /= 1000; ++ print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, rate); ++ ++ return rate; ++} ++ ++static uint32_t bcm2835_cpufreq_get_clock(int tag) ++{ ++ u32 rate; ++ int ret; ++ ++ ret = bcm2835_cpufreq_clock_property(tag, VCMSG_ID_ARM_CLOCK, &rate); ++ if (ret) { ++ print_err("Failed to get clock (%d)\n", ret); ++ return 0; ++ } ++ ++ rate /= 1000; ++ print_debug("%s frequency = %u\n", ++ tag == RPI_FIRMWARE_GET_CLOCK_RATE ? "Current": ++ tag == RPI_FIRMWARE_GET_MIN_CLOCK_RATE ? "Min": ++ tag == RPI_FIRMWARE_GET_MAX_CLOCK_RATE ? "Max": ++ "Unexpected", rate); ++ ++ return rate; ++} ++ ++/* ++ ==================================================== ++ Module Initialisation registers the cpufreq driver ++ ==================================================== ++*/ ++static int __init bcm2835_cpufreq_module_init(void) ++{ ++ print_debug("IN\n"); ++ return cpufreq_register_driver(&bcm2835_cpufreq_driver); ++} ++ ++/* ++ ============= ++ Module exit ++ ============= ++*/ ++static void __exit bcm2835_cpufreq_module_exit(void) ++{ ++ print_debug("IN\n"); ++ cpufreq_unregister_driver(&bcm2835_cpufreq_driver); ++ return; ++} ++ ++/* ++ ============================================================== ++ Initialisation function sets up the CPU policy for first use ++ ============================================================== ++*/ ++static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy) ++{ ++ /* measured value of how long it takes to change frequency */ ++ const unsigned int transition_latency = 355000; /* ns */ ++ ++ if (!rpi_firmware_get(NULL)) { ++ print_err("Firmware is not available\n"); ++ return -ENODEV; ++ } ++ ++ /* now find out what the maximum and minimum frequencies are */ ++ min_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MIN_CLOCK_RATE); ++ max_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MAX_CLOCK_RATE); ++ ++ if (min_frequency == max_frequency) { ++ bcm2835_freq_table[0].frequency = min_frequency; ++ bcm2835_freq_table[1].frequency = CPUFREQ_TABLE_END; ++ } else { ++ bcm2835_freq_table[0].frequency = min_frequency; ++ bcm2835_freq_table[1].frequency = max_frequency; ++ bcm2835_freq_table[2].frequency = CPUFREQ_TABLE_END; ++ } ++ ++ print_info("min=%d max=%d\n", min_frequency, max_frequency); ++ return cpufreq_generic_init(policy, bcm2835_freq_table, transition_latency); ++} ++ ++/* ++ ===================================================================== ++ Target index function chooses the requested frequency from the table ++ ===================================================================== ++*/ ++ ++static int bcm2835_cpufreq_driver_target_index(struct cpufreq_policy *policy, unsigned int state) ++{ ++ unsigned int target_freq = state == 0 ? min_frequency : max_frequency; ++ unsigned int cur = bcm2835_cpufreq_set_clock(policy->cur, target_freq); ++ ++ if (!cur) ++ { ++ print_err("Error occurred setting a new frequency (%d)\n", target_freq); ++ return -EINVAL; ++ } ++ print_debug("%s: %i: freq %d->%d\n", policy->governor->name, state, policy->cur, cur); ++ return 0; ++} ++ ++/* ++ ====================================================== ++ Get function returns the current frequency from table ++ ====================================================== ++*/ ++ ++static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu) ++{ ++ unsigned int actual_rate = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_CLOCK_RATE); ++ print_debug("cpu%d: freq=%d\n", cpu, actual_rate); ++ return actual_rate <= min_frequency ? min_frequency : max_frequency; ++} ++ ++/* the CPUFreq driver */ ++static struct cpufreq_driver bcm2835_cpufreq_driver = { ++ .name = "BCM2835 CPUFreq", ++ .init = bcm2835_cpufreq_driver_init, ++ .verify = cpufreq_generic_frequency_table_verify, ++ .target_index = bcm2835_cpufreq_driver_target_index, ++ .get = bcm2835_cpufreq_driver_get, ++ .attr = cpufreq_generic_attr, ++}; ++ ++MODULE_AUTHOR("Dorian Peake and Dom Cobley"); ++MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip"); ++MODULE_LICENSE("GPL"); ++ ++module_init(bcm2835_cpufreq_module_init); ++module_exit(bcm2835_cpufreq_module_exit); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1046_67c86ebfb2118d1e8f170112672f56040c290d6a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1046_67c86ebfb2118d1e8f170112672f56040c290d6a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1046_67c86ebfb2118d1e8f170112672f56040c290d6a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1046_67c86ebfb2118d1e8f170112672f56040c290d6a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,159 @@ +commit 67c86ebfb2118d1e8f170112672f56040c290d6a +Author: popcornmix +Date: Tue Mar 26 19:24:24 2013 +0000 + + Added hwmon/thermal driver for reporting core temperature. Thanks Dorian + + BCM270x: Move thermal sensor to Device Tree + + Add Device Tree support to bcm2835-thermal driver. + Add thermal sensor device to Device Tree. + Don't add platform device when booting in DT mode. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig +index a13541bdc726..de45ea51555e 100644 +--- a/drivers/thermal/Kconfig ++++ b/drivers/thermal/Kconfig +@@ -302,6 +302,13 @@ config INTEL_POWERCLAMP + enforce idle time which results in more package C-state residency. The + user interface is exposed via generic thermal framework. + ++config THERMAL_BCM2835 ++ depends on RASPBERRYPI_FIRMWARE ++ tristate "BCM2835 Thermal Driver" ++ help ++ This will enable temperature monitoring for the Broadcom BCM2835 ++ chip. If built as a module, it will be called 'bcm2835-thermal'. ++ + config X86_PKG_TEMP_THERMAL + tristate "X86 package temperature thermal driver" + depends on X86_THERMAL_VECTOR +diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile +index c92eb22a41ff..bcf9e7503c94 100644 +--- a/drivers/thermal/Makefile ++++ b/drivers/thermal/Makefile +@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o + obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o + obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o + obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o ++obj-$(CONFIG_THERMAL_BCM2835) += bcm2835-thermal.o + obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o + obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o + obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o +diff --git a/drivers/thermal/bcm2835-thermal.c b/drivers/thermal/bcm2835-thermal.c +new file mode 100644 +index 000000000000..c63fb9f9d143 +--- /dev/null ++++ b/drivers/thermal/bcm2835-thermal.c +@@ -0,0 +1,109 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++ ++static int bcm2835_thermal_get_property(struct thermal_zone_device *tz, ++ int *temp, u32 tag) ++{ ++ struct rpi_firmware *fw = tz->devdata; ++ struct { ++ u32 id; ++ u32 val; ++ } packet; ++ int ret; ++ ++ *temp = 0; ++ packet.id = 0; ++ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); ++ if (ret) { ++ dev_err(&tz->device, "Failed to get temperature\n"); ++ return ret; ++ } ++ ++ *temp = packet.val; ++ dev_dbg(&tz->device, "%stemp=%d\n", ++ tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp); ++ ++ return 0; ++} ++ ++static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, ++ int *temp) ++{ ++ return bcm2835_thermal_get_property(tz, temp, ++ RPI_FIRMWARE_GET_TEMPERATURE); ++} ++ ++static struct thermal_zone_device_ops ops = { ++ .get_temp = bcm2835_thermal_get_temp, ++}; ++ ++static int bcm2835_thermal_probe(struct platform_device *pdev) ++{ ++ struct device_node *fw_np; ++ struct rpi_firmware *fw; ++ struct thermal_zone_device *tz; ++ ++ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0); ++ if (!fw_np) { ++ dev_err(&pdev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ fw = rpi_firmware_get(fw_np); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ tz = thermal_zone_device_register("bcm2835_thermal", 0, 0, fw, &ops, ++ NULL, 0, 0); ++ if (IS_ERR(tz)) { ++ dev_err(&pdev->dev, "Failed to register the thermal device\n"); ++ return PTR_ERR(tz); ++ } ++ ++ platform_set_drvdata(pdev, tz); ++ ++ return 0; ++} ++ ++static int bcm2835_thermal_remove(struct platform_device *pdev) ++{ ++ thermal_zone_device_unregister(platform_get_drvdata(pdev)); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_thermal_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-thermal", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table); ++ ++static struct platform_driver bcm2835_thermal_driver = { ++ .probe = bcm2835_thermal_probe, ++ .remove = bcm2835_thermal_remove, ++ .driver = { ++ .name = "bcm2835_thermal", ++ .of_match_table = bcm2835_thermal_of_match_table, ++ }, ++}; ++module_platform_driver(bcm2835_thermal_driver); ++ ++MODULE_AUTHOR("Dorian Peake"); ++MODULE_AUTHOR("Noralf Trønnes"); ++MODULE_DESCRIPTION("Thermal driver for bcm2835 chip"); ++MODULE_LICENSE("GPL"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1047_9df5883b7d126f48e3ba00850bdf920f9d9ccb9a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1047_9df5883b7d126f48e3ba00850bdf920f9d9ccb9a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1047_9df5883b7d126f48e3ba00850bdf920f9d9ccb9a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1047_9df5883b7d126f48e3ba00850bdf920f9d9ccb9a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,659 @@ +commit 9df5883b7d126f48e3ba00850bdf920f9d9ccb9a +Author: popcornmix +Date: Wed Jun 17 15:44:08 2015 +0100 + + Add Chris Boot's i2c driver + + i2c-bcm2708: fixed baudrate + + Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock). + In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits. + This resulted in incorrect setting of CDIV and higher baudrate than intended. + Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz + After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz + The correct baudrate is shown in the log after the cdiv > 0xffff correction. + + Perform I2C combined transactions when possible + + Perform I2C combined transactions whenever possible, within the + restrictions of the Broadcomm Serial Controller. + + Disable DONE interrupt during TA poll + + Prevent interrupt from being triggered if poll is missed and transfer + starts and finishes. + + i2c: Make combined transactions optional and disabled by default + + i2c: bcm2708: add device tree support + + Add DT support to driver and add to .dtsi file. + Setup pins in .dts file. + i2c is disabled by default. + + Signed-off-by: Noralf Tronnes + + bcm2708: don't register i2c controllers when using DT + + The devices for the i2c controllers are in the Device Tree. + Only register devices when not using DT. + + Signed-off-by: Noralf Tronnes + + I2C: Only register the I2C device for the current board revision + + i2c_bcm2708: Fix clock reference counting + + Fix grabbing lock from atomic context in i2c driver + + 2 main changes: + - check for timeouts in the bcm2708_bsc_setup function as indicated by this comment: + /* poll for transfer start bit (should only take 1-20 polls) */ + This implies that the setup function can now fail so account for this everywhere it's called + - Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock. + + i2c-bcm2708: When using DT, leave the GPIO setup to pinctrl + + i2c-bcm2708: Increase timeouts to allow larger transfers + + Use the timeout value provided by the I2C_TIMEOUT ioctl when waiting + for completion. The default timeout is 1 second. + + See: https://github.com/raspberrypi/linux/issues/260 + + i2c-bcm2708/BCM270X_DT: Add support for I2C2 + + The third I2C bus (I2C2) is normally reserved for HDMI use. Careless + use of this bus can break an attached display - use with caution. + + It is recommended to disable accesses by VideoCore by setting + hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt. + + The interface is disabled by default - enable using the + i2c2_iknowwhatimdoing DT parameter. + + bcm2708-spi: Don't use static pin configuration with DT + + Also remove superfluous error checking - the SPI framework ensures the + validity of the chip_select value. + + i2c-bcm2708: Remove non-DT support + + Signed-off-by: Noralf Trønnes + + Set the BSC_CLKT clock streching timeout to 35ms as per SMBus specs. + + Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574) + + * i2c: fix i2c_bcm2708: Clear FIFO before sending data + + Make sure FIFO gets cleared before trying to send + data in case of a repeated start (COMBINED=Y). + + * i2c: fix i2c_bcm2708: Only write to FIFO when not full + + Check if FIFO can accept data before writing. + To avoid a peripheral read on the last iteration of a loop, + both bcm2708_bsc_fifo_fill and ~drain are changed as well. + +diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig +index d252276feadf..b81d8133639a 100644 +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -8,6 +8,25 @@ menu "I2C Hardware Bus support" + comment "PC SMBus host controller drivers" + depends on PCI + ++config I2C_BCM2708 ++ tristate "BCM2708 BSC" ++ depends on ARCH_BCM2835 ++ help ++ Enabling this option will add BSC (Broadcom Serial Controller) ++ support for the BCM2708. BSC is a Broadcom proprietary bus compatible ++ with I2C/TWI/SMBus. ++ ++config I2C_BCM2708_BAUDRATE ++ prompt "BCM2708 I2C baudrate" ++ depends on I2C_BCM2708 ++ int ++ default 100000 ++ help ++ Set the I2C baudrate. This will alter the default value. A ++ different baudrate can be set by using a module parameter as well. If ++ no parameter is provided when loading, this is the value that will be ++ used. ++ + config I2C_ALI1535 + tristate "ALI 1535" + depends on PCI +diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile +index 29764cc20a44..26ae016a15e7 100644 +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -2,6 +2,8 @@ + # Makefile for the i2c bus drivers. + # + ++obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o ++ + # ACPI drivers + obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o + +diff --git a/drivers/i2c/busses/i2c-bcm2708.c b/drivers/i2c/busses/i2c-bcm2708.c +new file mode 100644 +index 000000000000..962f2e5c7455 +--- /dev/null ++++ b/drivers/i2c/busses/i2c-bcm2708.c +@@ -0,0 +1,512 @@ ++/* ++ * Driver for Broadcom BCM2708 BSC Controllers ++ * ++ * Copyright (C) 2012 Chris Boot & Frank Buss ++ * ++ * This driver is inspired by: ++ * i2c-ocores.c, by Peter Korsgaard ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* BSC register offsets */ ++#define BSC_C 0x00 ++#define BSC_S 0x04 ++#define BSC_DLEN 0x08 ++#define BSC_A 0x0c ++#define BSC_FIFO 0x10 ++#define BSC_DIV 0x14 ++#define BSC_DEL 0x18 ++#define BSC_CLKT 0x1c ++ ++/* Bitfields in BSC_C */ ++#define BSC_C_I2CEN 0x00008000 ++#define BSC_C_INTR 0x00000400 ++#define BSC_C_INTT 0x00000200 ++#define BSC_C_INTD 0x00000100 ++#define BSC_C_ST 0x00000080 ++#define BSC_C_CLEAR_1 0x00000020 ++#define BSC_C_CLEAR_2 0x00000010 ++#define BSC_C_READ 0x00000001 ++ ++/* Bitfields in BSC_S */ ++#define BSC_S_CLKT 0x00000200 ++#define BSC_S_ERR 0x00000100 ++#define BSC_S_RXF 0x00000080 ++#define BSC_S_TXE 0x00000040 ++#define BSC_S_RXD 0x00000020 ++#define BSC_S_TXD 0x00000010 ++#define BSC_S_RXR 0x00000008 ++#define BSC_S_TXW 0x00000004 ++#define BSC_S_DONE 0x00000002 ++#define BSC_S_TA 0x00000001 ++ ++#define I2C_WAIT_LOOP_COUNT 200 ++ ++#define DRV_NAME "bcm2708_i2c" ++ ++static unsigned int baudrate; ++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(baudrate, "The I2C baudrate"); ++ ++static bool combined = false; ++module_param(combined, bool, 0644); ++MODULE_PARM_DESC(combined, "Use combined transactions"); ++ ++struct bcm2708_i2c { ++ struct i2c_adapter adapter; ++ ++ spinlock_t lock; ++ void __iomem *base; ++ int irq; ++ struct clk *clk; ++ u32 cdiv; ++ u32 clk_tout; ++ ++ struct completion done; ++ ++ struct i2c_msg *msg; ++ int pos; ++ int nmsgs; ++ bool error; ++}; ++ ++static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg) ++{ ++ return readl(bi->base + reg); ++} ++ ++static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val) ++{ ++ writel(val, bi->base + reg); ++} ++ ++static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi) ++{ ++ bcm2708_wr(bi, BSC_C, 0); ++ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE); ++} ++ ++static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi) ++{ ++ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD)) ++ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO); ++} ++ ++static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi) ++{ ++ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD)) ++ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); ++} ++ ++static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi) ++{ ++ u32 cdiv, s, clk_tout; ++ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1; ++ int wait_loops = I2C_WAIT_LOOP_COUNT; ++ ++ /* Can't call clk_get_rate as it locks a mutex and here we are spinlocked. ++ * Use the value that we cached in the probe. ++ */ ++ cdiv = bi->cdiv; ++ clk_tout = bi->clk_tout; ++ ++ if (bi->msg->flags & I2C_M_RD) ++ c |= BSC_C_INTR | BSC_C_READ; ++ else ++ c |= BSC_C_INTT; ++ ++ bcm2708_wr(bi, BSC_CLKT, clk_tout); ++ bcm2708_wr(bi, BSC_DIV, cdiv); ++ bcm2708_wr(bi, BSC_A, bi->msg->addr); ++ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); ++ if (combined) ++ { ++ /* Do the next two messages meet combined transaction criteria? ++ - Current message is a write, next message is a read ++ - Both messages to same slave address ++ - Write message can fit inside FIFO (16 bytes or less) */ ++ if ( (bi->nmsgs > 1) && ++ !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) && ++ (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) { ++ ++ /* Clear FIFO */ ++ bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1); ++ ++ /* Fill FIFO with entire write message (16 byte FIFO) */ ++ while (bi->pos < bi->msg->len) { ++ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); ++ } ++ /* Start write transfer (no interrupts, don't clear FIFO) */ ++ bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST); ++ ++ /* poll for transfer start bit (should only take 1-20 polls) */ ++ do { ++ s = bcm2708_rd(bi, BSC_S); ++ } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0); ++ ++ /* did we time out or some error occured? */ ++ if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) { ++ return -1; ++ } ++ ++ /* Send next read message before the write transfer finishes. */ ++ bi->nmsgs--; ++ bi->msg++; ++ bi->pos = 0; ++ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); ++ c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_INTR | BSC_C_ST | BSC_C_READ; ++ } ++ } ++ bcm2708_wr(bi, BSC_C, c); ++ ++ return 0; ++} ++ ++static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id) ++{ ++ struct bcm2708_i2c *bi = dev_id; ++ bool handled = true; ++ u32 s; ++ int ret; ++ ++ spin_lock(&bi->lock); ++ ++ /* we may see camera interrupts on the "other" I2C channel ++ Just return if we've not sent anything */ ++ if (!bi->nmsgs || !bi->msg) { ++ goto early_exit; ++ } ++ ++ s = bcm2708_rd(bi, BSC_S); ++ ++ if (s & (BSC_S_CLKT | BSC_S_ERR)) { ++ bcm2708_bsc_reset(bi); ++ bi->error = true; ++ ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ } else if (s & BSC_S_DONE) { ++ bi->nmsgs--; ++ ++ if (bi->msg->flags & I2C_M_RD) { ++ bcm2708_bsc_fifo_drain(bi); ++ } ++ ++ bcm2708_bsc_reset(bi); ++ ++ if (bi->nmsgs) { ++ /* advance to next message */ ++ bi->msg++; ++ bi->pos = 0; ++ ret = bcm2708_bsc_setup(bi); ++ if (ret < 0) { ++ bcm2708_bsc_reset(bi); ++ bi->error = true; ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ goto early_exit; ++ } ++ } else { ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ } ++ } else if (s & BSC_S_TXW) { ++ bcm2708_bsc_fifo_fill(bi); ++ } else if (s & BSC_S_RXR) { ++ bcm2708_bsc_fifo_drain(bi); ++ } else { ++ handled = false; ++ } ++ ++early_exit: ++ spin_unlock(&bi->lock); ++ ++ return handled ? IRQ_HANDLED : IRQ_NONE; ++} ++ ++static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap, ++ struct i2c_msg *msgs, int num) ++{ ++ struct bcm2708_i2c *bi = adap->algo_data; ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&bi->lock, flags); ++ ++ reinit_completion(&bi->done); ++ bi->msg = msgs; ++ bi->pos = 0; ++ bi->nmsgs = num; ++ bi->error = false; ++ ++ ret = bcm2708_bsc_setup(bi); ++ ++ spin_unlock_irqrestore(&bi->lock, flags); ++ ++ /* check the result of the setup */ ++ if (ret < 0) ++ { ++ dev_err(&adap->dev, "transfer setup timed out\n"); ++ goto error_timeout; ++ } ++ ++ ret = wait_for_completion_timeout(&bi->done, adap->timeout); ++ if (ret == 0) { ++ dev_err(&adap->dev, "transfer timed out\n"); ++ goto error_timeout; ++ } ++ ++ ret = bi->error ? -EIO : num; ++ return ret; ++ ++error_timeout: ++ spin_lock_irqsave(&bi->lock, flags); ++ bcm2708_bsc_reset(bi); ++ bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */ ++ bi->nmsgs = 0; ++ spin_unlock_irqrestore(&bi->lock, flags); ++ return -ETIMEDOUT; ++} ++ ++static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap) ++{ ++ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL; ++} ++ ++static struct i2c_algorithm bcm2708_i2c_algorithm = { ++ .master_xfer = bcm2708_i2c_master_xfer, ++ .functionality = bcm2708_i2c_functionality, ++}; ++ ++static int bcm2708_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ int irq, err = -ENOMEM; ++ struct clk *clk; ++ struct bcm2708_i2c *bi; ++ struct i2c_adapter *adap; ++ unsigned long bus_hz; ++ u32 cdiv, clk_tout; ++ u32 baud; ++ ++ baud = CONFIG_I2C_BCM2708_BAUDRATE; ++ ++ if (pdev->dev.of_node) { ++ u32 bus_clk_rate; ++ pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c"); ++ if (pdev->id < 0) { ++ dev_err(&pdev->dev, "alias is missing\n"); ++ return -EINVAL; ++ } ++ if (!of_property_read_u32(pdev->dev.of_node, ++ "clock-frequency", &bus_clk_rate)) ++ baud = bus_clk_rate; ++ else ++ dev_warn(&pdev->dev, ++ "Could not read clock-frequency property\n"); ++ } ++ ++ if (baudrate) ++ baud = baudrate; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(&pdev->dev, "could not get IO memory\n"); ++ return -ENXIO; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "could not get IRQ\n"); ++ return irq; ++ } ++ ++ clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); ++ return PTR_ERR(clk); ++ } ++ ++ err = clk_prepare_enable(clk); ++ if (err) { ++ dev_err(&pdev->dev, "could not enable clk: %d\n", err); ++ goto out_clk_put; ++ } ++ ++ bi = kzalloc(sizeof(*bi), GFP_KERNEL); ++ if (!bi) ++ goto out_clk_disable; ++ ++ platform_set_drvdata(pdev, bi); ++ ++ adap = &bi->adapter; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC; ++ adap->algo = &bcm2708_i2c_algorithm; ++ adap->algo_data = bi; ++ adap->dev.parent = &pdev->dev; ++ adap->nr = pdev->id; ++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); ++ adap->dev.of_node = pdev->dev.of_node; ++ ++ switch (pdev->id) { ++ case 0: ++ adap->class = I2C_CLASS_HWMON; ++ break; ++ case 1: ++ adap->class = I2C_CLASS_DDC; ++ break; ++ case 2: ++ adap->class = I2C_CLASS_DDC; ++ break; ++ default: ++ dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n"); ++ err = -ENXIO; ++ goto out_free_bi; ++ } ++ ++ spin_lock_init(&bi->lock); ++ init_completion(&bi->done); ++ ++ bi->base = ioremap(regs->start, resource_size(regs)); ++ if (!bi->base) { ++ dev_err(&pdev->dev, "could not remap memory\n"); ++ goto out_free_bi; ++ } ++ ++ bi->irq = irq; ++ bi->clk = clk; ++ ++ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED, ++ dev_name(&pdev->dev), bi); ++ if (err) { ++ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); ++ goto out_iounmap; ++ } ++ ++ bcm2708_bsc_reset(bi); ++ ++ err = i2c_add_numbered_adapter(adap); ++ if (err < 0) { ++ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err); ++ goto out_free_irq; ++ } ++ ++ bus_hz = clk_get_rate(bi->clk); ++ cdiv = bus_hz / baud; ++ if (cdiv > 0xffff) { ++ cdiv = 0xffff; ++ baud = bus_hz / cdiv; ++ } ++ ++ clk_tout = 35/1000*baud; //35ms timeout as per SMBus specs. ++ if (clk_tout > 0xffff) ++ clk_tout = 0xffff; ++ ++ bi->cdiv = cdiv; ++ bi->clk_tout = clk_tout; ++ ++ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n", ++ pdev->id, (unsigned long)regs->start, irq, baud); ++ ++ return 0; ++ ++out_free_irq: ++ free_irq(bi->irq, bi); ++out_iounmap: ++ iounmap(bi->base); ++out_free_bi: ++ kfree(bi); ++out_clk_disable: ++ clk_disable_unprepare(clk); ++out_clk_put: ++ clk_put(clk); ++ return err; ++} ++ ++static int bcm2708_i2c_remove(struct platform_device *pdev) ++{ ++ struct bcm2708_i2c *bi = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ i2c_del_adapter(&bi->adapter); ++ free_irq(bi->irq, bi); ++ iounmap(bi->base); ++ clk_disable_unprepare(bi->clk); ++ clk_put(bi->clk); ++ kfree(bi); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2708_i2c_of_match[] = { ++ { .compatible = "brcm,bcm2708-i2c" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2708_i2c_of_match); ++ ++static struct platform_driver bcm2708_i2c_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2708_i2c_of_match, ++ }, ++ .probe = bcm2708_i2c_probe, ++ .remove = bcm2708_i2c_remove, ++}; ++ ++// module_platform_driver(bcm2708_i2c_driver); ++ ++ ++static int __init bcm2708_i2c_init(void) ++{ ++ return platform_driver_register(&bcm2708_i2c_driver); ++} ++ ++static void __exit bcm2708_i2c_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_i2c_driver); ++} ++ ++module_init(bcm2708_i2c_init); ++module_exit(bcm2708_i2c_exit); ++ ++ ++ ++MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708"); ++MODULE_AUTHOR("Chris Boot "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRV_NAME); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1048_ef85ef617b4e549ada46125fde4b35c5b409ea4a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1048_ef85ef617b4e549ada46125fde4b35c5b409ea4a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1048_ef85ef617b4e549ada46125fde4b35c5b409ea4a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1048_ef85ef617b4e549ada46125fde4b35c5b409ea4a.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,220 @@ +commit ef85ef617b4e549ada46125fde4b35c5b409ea4a +Author: Noralf Trønnes +Date: Fri Jun 26 14:27:06 2015 +0200 + + char: broadcom: Add vcio module + + Add module for accessing the mailbox property channel through + /dev/vcio. Was previously in bcm2708-vcio. + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/char/broadcom/Kconfig b/drivers/char/broadcom/Kconfig +index f7885466f5bf..032164919350 100644 +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -22,6 +22,12 @@ config BCM2708_VCMEM + help + Helper for videocore memory access and total size allocation. + ++config BCM_VCIO ++ tristate "Mailbox userspace access" ++ depends on BCM2835_MBOX ++ help ++ Gives access to the mailbox property channel from userspace. ++ + endif + + config BCM_VC_SM +diff --git a/drivers/char/broadcom/Makefile b/drivers/char/broadcom/Makefile +index 667d33ef38f3..14775c9b20b4 100644 +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,5 +1,6 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ++obj-$(CONFIG_BCM_VCIO) += vcio.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o +diff --git a/drivers/char/broadcom/vcio.c b/drivers/char/broadcom/vcio.c +new file mode 100644 +index 000000000000..c19bc2075c77 +--- /dev/null ++++ b/drivers/char/broadcom/vcio.c +@@ -0,0 +1,175 @@ ++/* ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2015 Noralf Trønnes ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MBOX_CHAN_PROPERTY 8 ++ ++#define VCIO_IOC_MAGIC 100 ++#define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *) ++ ++static struct { ++ dev_t devt; ++ struct cdev cdev; ++ struct class *class; ++ struct rpi_firmware *fw; ++} vcio; ++ ++static int vcio_user_property_list(void *user) ++{ ++ u32 *buf, size; ++ int ret; ++ ++ /* The first 32-bit is the size of the buffer */ ++ if (copy_from_user(&size, user, sizeof(size))) ++ return -EFAULT; ++ ++ buf = kmalloc(size, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ if (copy_from_user(buf, user, size)) { ++ kfree(buf); ++ return -EFAULT; ++ } ++ ++ /* Strip off protocol encapsulation */ ++ ret = rpi_firmware_property_list(vcio.fw, &buf[2], size - 12); ++ if (ret) { ++ kfree(buf); ++ return ret; ++ } ++ ++ buf[1] = RPI_FIRMWARE_STATUS_SUCCESS; ++ if (copy_to_user(user, buf, size)) ++ ret = -EFAULT; ++ ++ kfree(buf); ++ ++ return ret; ++} ++ ++static int vcio_device_open(struct inode *inode, struct file *file) ++{ ++ try_module_get(THIS_MODULE); ++ ++ return 0; ++} ++ ++static int vcio_device_release(struct inode *inode, struct file *file) ++{ ++ module_put(THIS_MODULE); ++ ++ return 0; ++} ++ ++static long vcio_device_ioctl(struct file *file, unsigned int ioctl_num, ++ unsigned long ioctl_param) ++{ ++ switch (ioctl_num) { ++ case IOCTL_MBOX_PROPERTY: ++ return vcio_user_property_list((void *)ioctl_param); ++ default: ++ pr_err("unknown ioctl: %d\n", ioctl_num); ++ return -EINVAL; ++ } ++} ++ ++const struct file_operations vcio_fops = { ++ .unlocked_ioctl = vcio_device_ioctl, ++ .open = vcio_device_open, ++ .release = vcio_device_release, ++}; ++ ++static int __init vcio_init(void) ++{ ++ struct device_node *np; ++ static struct device *dev; ++ int ret; ++ ++ np = of_find_compatible_node(NULL, NULL, ++ "raspberrypi,bcm2835-firmware"); ++/* Uncomment this when we only boot with Device Tree ++ if (!of_device_is_available(np)) ++ return -ENODEV; ++*/ ++ vcio.fw = rpi_firmware_get(np); ++ if (!vcio.fw) ++ return -ENODEV; ++ ++ ret = alloc_chrdev_region(&vcio.devt, 0, 1, "vcio"); ++ if (ret) { ++ pr_err("failed to allocate device number\n"); ++ return ret; ++ } ++ ++ cdev_init(&vcio.cdev, &vcio_fops); ++ vcio.cdev.owner = THIS_MODULE; ++ ret = cdev_add(&vcio.cdev, vcio.devt, 1); ++ if (ret) { ++ pr_err("failed to register device\n"); ++ goto err_unregister_chardev; ++ } ++ ++ /* ++ * Create sysfs entries ++ * 'bcm2708_vcio' is used for backwards compatibility so we don't break ++ * userspace. Raspian has a udev rule that changes the permissions. ++ */ ++ vcio.class = class_create(THIS_MODULE, "bcm2708_vcio"); ++ if (IS_ERR(vcio.class)) { ++ ret = PTR_ERR(vcio.class); ++ pr_err("failed to create class\n"); ++ goto err_cdev_del; ++ } ++ ++ dev = device_create(vcio.class, NULL, vcio.devt, NULL, "vcio"); ++ if (IS_ERR(dev)) { ++ ret = PTR_ERR(dev); ++ pr_err("failed to create device\n"); ++ goto err_class_destroy; ++ } ++ ++ return 0; ++ ++err_class_destroy: ++ class_destroy(vcio.class); ++err_cdev_del: ++ cdev_del(&vcio.cdev); ++err_unregister_chardev: ++ unregister_chrdev_region(vcio.devt, 1); ++ ++ return ret; ++} ++module_init(vcio_init); ++ ++static void __exit vcio_exit(void) ++{ ++ device_destroy(vcio.class, vcio.devt); ++ class_destroy(vcio.class); ++ cdev_del(&vcio.cdev); ++ unregister_chrdev_region(vcio.devt, 1); ++} ++module_exit(vcio_exit); ++ ++MODULE_AUTHOR("Gray Girling"); ++MODULE_AUTHOR("Noralf Trønnes"); ++MODULE_DESCRIPTION("Mailbox userspace access"); ++MODULE_LICENSE("GPL"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1049_4455668006c8da3eb4c4b1ac2094165d3f5c2a04.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1049_4455668006c8da3eb4c4b1ac2094165d3f5c2a04.patch --- linux-4.9.13/debian/patches/rpi/rpi_1049_4455668006c8da3eb4c4b1ac2094165d3f5c2a04.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1049_4455668006c8da3eb4c4b1ac2094165d3f5c2a04.patch 2017-03-12 01:46:15.000000000 +0000 @@ -0,0 +1,80 @@ +commit 4455668006c8da3eb4c4b1ac2094165d3f5c2a04 +Author: Noralf Trønnes +Date: Fri Jun 26 14:25:01 2015 +0200 + + firmware: bcm2835: Support ARCH_BCM270x + + Support booting without Device Tree. + Turn on USB power. + Load driver early because of lacking support for deferred probing + in many drivers. + + Signed-off-by: Noralf Trønnes + + firmware: bcm2835: Don't turn on USB power + + The raspberrypi-power driver is now used to turn on USB power. + + This partly reverts commit: + firmware: bcm2835: Support ARCH_BCM270x + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c +index dd506cd3a5b8..3f070bd38a91 100644 +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -28,6 +28,8 @@ struct rpi_firmware { + u32 enabled; + }; + ++static struct platform_device *g_pdev; ++ + static DEFINE_MUTEX(transaction_lock); + + static void response_callback(struct mbox_client *cl, void *msg) +@@ -207,6 +209,7 @@ static int rpi_firmware_probe(struct platform_device *pdev) + init_completion(&fw->c); + + platform_set_drvdata(pdev, fw); ++ g_pdev = pdev; + + rpi_firmware_print_firmware_revision(fw); + +@@ -218,6 +221,7 @@ static int rpi_firmware_remove(struct platform_device *pdev) + struct rpi_firmware *fw = platform_get_drvdata(pdev); + + mbox_free_channel(fw->chan); ++ g_pdev = NULL; + + return 0; + } +@@ -230,7 +234,7 @@ static int rpi_firmware_remove(struct platform_device *pdev) + */ + struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) + { +- struct platform_device *pdev = of_find_device_by_node(firmware_node); ++ struct platform_device *pdev = g_pdev; + + if (!pdev) + return NULL; +@@ -253,7 +257,18 @@ static struct platform_driver rpi_firmware_driver = { + .probe = rpi_firmware_probe, + .remove = rpi_firmware_remove, + }; +-module_platform_driver(rpi_firmware_driver); ++ ++static int __init rpi_firmware_init(void) ++{ ++ return platform_driver_register(&rpi_firmware_driver); ++} ++subsys_initcall(rpi_firmware_init); ++ ++static void __init rpi_firmware_exit(void) ++{ ++ platform_driver_unregister(&rpi_firmware_driver); ++} ++module_exit(rpi_firmware_exit); + + MODULE_AUTHOR("Eric Anholt "); + MODULE_DESCRIPTION("Raspberry Pi firmware driver"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1050_450159ac1eb7f07164595d28c84c6be4ac54ac49.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1050_450159ac1eb7f07164595d28c84c6be4ac54ac49.patch --- linux-4.9.13/debian/patches/rpi/rpi_1050_450159ac1eb7f07164595d28c84c6be4ac54ac49.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1050_450159ac1eb7f07164595d28c84c6be4ac54ac49.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,7711 @@ +commit 450159ac1eb7f07164595d28c84c6be4ac54ac49 +Author: Vincent Sanders +Date: Wed Jan 30 12:45:18 2013 +0000 + + bcm2835: add v4l2 camera device + + - Supports raw YUV capture, preview, JPEG and H264. + - Uses videobuf2 for data transfer, using dma_buf. + - Uses 3.6.10 timestamping + - Camera power based on use + - Uses immutable input mode on video encoder + + Signed-off-by: Daniel Stone + Signed-off-by: Luke Diamand + + V4L2: Fixes from 6by9 + + V4L2: Fix EV values. Add manual shutter speed control + + V4L2 EV values should be in units of 1/1000. Corrected. + Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should + give manual shutter control. Requires manual exposure mode + to be selected first. + + Signed-off-by: Dave Stevenson + + V4L2: Correct JPEG Q-factor range + + Should be 1-100, not 0-100 + + Signed-off-by: Dave Stevenson + + V4L2: Fix issue of driver jamming if STREAMON failed. + + Fix issue where the driver was left in a partially enabled + state if STREAMON failed, and would then reject many IOCTLs + as it thought it was streaming. + + Signed-off-by: Dave Stevenson + + V4L2: Fix ISO controls. + + Driver was passing the index to the GPU, and not the desired + ISO value. + + Signed-off-by: Dave Stevenson + + V4L2: Add flicker avoidance controls + + Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker + avoidance frequencies. + + Signed-off-by: Dave Stevenson + + V4L2: Add support for frame rate control. + + Add support for frame rate (or time per frame as V4L2 + inverts it) control via s_parm. + + Signed-off-by: Dave Stevenson + + V4L2: Improve G_FBUF handling so we pass conformance + + Return some sane numbers for get framebuffer so that + we pass conformance. + + Signed-off-by: Dave Stevenson + + V4L2: Fix information advertised through g_vidfmt + + Width and height were being stored based on incorrect + values. + + Signed-off-by: Dave Stevenson + + V4L2: Add support for inline H264 headers + + Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER + to control H264 inline headers. + Requires firmware fix to work correctly, otherwise format + has to be set to H264 before this parameter is set. + + Signed-off-by: Dave Stevenson + + V4L2: Fix JPEG timestamp issue + + JPEG images were coming through from the GPU with timestamp + of 0. Detect this and give current system time instead + of some invalid value. + + Signed-off-by: Dave Stevenson + + V4L2: Fix issue when switching down JPEG resolution. + + JPEG buffer size calculation is based on input resolution. + Input resolution was being configured after output port + format. Caused failures if switching from one JPEG resolution + to a smaller one. + + Signed-off-by: Dave Stevenson + + V4L2: Enable MJPEG encoding + + Requires GPU firmware update to support MJPEG encoder. + + Signed-off-by: Dave Stevenson + + V4L2: Correct flag settings for compressed formats + + Set flags field correctly on enum_fmt_vid_cap for compressed + image formats. + + Signed-off-by: Dave Stevenson + + V4L2: H264 profile & level ctrls, FPS control and auto exp pri + + Several control handling updates. + H264 profile and level controls. + Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to + select whether AE is allowed to override the framerate specified. + + Signed-off-by: Dave Stevenson + + V4L2: Correct BGR24 to RGB24 in format table + + Signed-off-by: Dave Stevenson + + V4L2: Add additional pixel formats. Correct colourspace + + Adds the other flavours of YUYV, and NV12. + Corrects the overlay advertised colourspace. + + Signed-off-by: Dave Stevenson + + V4L2: Drop logging msg from info to debug + + Signed-off-by: Dave Stevenson + + V4L2: Initial pass at scene modes. + + Only supports exposure mode and metering modes. + + Signed-off-by: Dave Stevenson + + V4L2: Add manual white balance control. + + Adds support for V4L2_CID_RED_BALANCE and + V4L2_CID_BLUE_BALANCE. Only has an effect if + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has + V4L2_WHITE_BALANCE_MANUAL selected. + + Signed-off-by: Dave Stevenson + + config: Enable V4L / MMAL driver + + V4L2: Increase the MMAL timeout to 3sec + + MJPEG codec flush is now taking longer and results + in a kernel panic if the driver has stopped waiting for + the result when it finally completes. + Increase the timeout value from 1 to 3secs. + + Signed-off-by: Dave Stevenson + + V4L2: Add support for setting H264_I_PERIOD + + Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD + to set the frequency with which I frames are produced. + + Signed-off-by: Dave Stevenson + + V4L2: Enable GPU function for removing padding from images. + + GPU can now support arbitrary strides, although may require + additional processing to achieve it. Enable this feature + so that the images delivered are the size requested. + + Signed-off-by: Dave Stevenson + + V4L2: Add support for V4L2_PIX_FMT_BGR32 + + Signed-off-by: Dave Stevenson + + V4L2: Set the colourspace to avoid odd YUV-RGB conversions + + Removes the amiguity from the conversion routines and stops + them dropping back to the SD vs HD choice of coeffs. + + Signed-off-by: Dave Stevenson + + V4L2: Make video/still threshold a run-time param + + Move the define for at what resolution the driver + switches from a video mode capture to a stills mode + capture to module parameters. + + Signed-off-by: Dave Stevenson + + V4L2: Fix incorrect pool sizing + + Signed-off-by: Dave Stevenson + + V4L2: Add option to disable enum_framesizes. + + Gstreamer's handling of a driver that advertises + V4L2_FRMSIZE_TYPE_STEPWISE to define the supported + resolutions is broken. See bug + https://bugzilla.gnome.org/show_bug.cgi?id=726521 + + Optional parameter of gst_v4l2src_is_broken added. + If non-zero, the driver claims not to support that + ioctl, and gstreamer should be happy again (it + guesses a set of defaults for itself). + + Signed-off-by: Dave Stevenson + + V4L2: Add support for more image formats + + Adds YVU420 (YV12), YVU420SP (NV21), and BGR888. + + Signed-off-by: Dave Stevenson + + V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD + + Request to extend the range from the fairly arbitrary + 1000 frames (33 seconds at 30fps). Extend out to the + max range supported (int32 value). + Also allow 0, which is handled by the codec as only + send an I-frame on the first frame and never again. + There may be an exception if it detects a significant + scene change, but there's no easy way around that. + + Signed-off-by: Dave Stevenson + + bcm2835-camera: stop_streaming now has a void return + + BCM2835-V4L2: Fix compliance test failures + + VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due + to reporting V4L2_COLORSPACE_JPEG when the colour + format wasn't V4L2_PIX_FMT_JPEG. + Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats. + + bcm2835 camera planar/packed stride length + + Added a field to the mmal_fmt struct used to compute the bytes per line + when using a particular format. This results in the correct stride being + calculated even when the format is planar. + + Signed-off-by: Garrett Wilson + + bcm2835: camera: check for scene not being found + + static analysis by cppcheck detected some potential NULL pointer + dereference issues: + + [drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null + pointer dereference: scene + (and lines 858, 859 too) + + it is possible that scene is not found because of an invalue ctrl->val + and is therefore NULL and hence causing a null pointer dereference. + + Signed-off-by: Colin Ian King + + bcm2835: memcpy port data to m rather than rmsg + + static analysis by cppcheck detected a memcpy to rmsg which is + not actually initialized at that point. The memcpy should be copying + to variable m instead. + + Signed-off-by: Colin Ian King + + BCM2835-V4L2: Return buffers to videobuf2 on shutdown + + https://github.com/raspberrypi/linux/issues/817 + Fixes the kernel warning from videobuf2 as buffers + are now returned as they are being flushed on + stop_streaming. + + squash: Fixup bcm2835-camera for changes in kernel 4.4 api + + v4l2: Fix up driver to upstream timestamp changes + + bcm2835-camera: fix a bug in computation of frame timestamp + + Fixes #1318 + + V4L2 driver updates (#1393) + + * BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO + + https://github.com/raspberrypi/linux/issues/1251 + + V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should. + V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking + V4L2_CID_ISO_SENSITIVITY as 0 for auto mode. + Still accepts 0 for auto, but also abides by the new parameter. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + * BCM2835-V4L2: Add a video_nr parameter. + + Adds a kernel parameter "video_nr" to specify the preferred + /dev/videoX device node. + https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545 + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + * BCM2835-V4L2: Add support for multiple cameras + + Ask GPU on load how many cameras have been detected, and + enumerate that number of devices. + Only applicable on the Compute Module as no other device + exposes multiple CSI2 interfaces. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + * BCM2835-V4L2: Add control of the overlay location and alpha. + + Actually do something useful in vidioc_s_fmt_vid_overlay and + vidioc_try_fmt_vid_overlay, rather than effectively having + read-only fields. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + * BCM2835-V4L2: V4L2-Compliance failure fix + + VIDIOC_TRY_FMT was failing due to bytesperline not + being set correctly by default. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + * BCM2835-V4L2: Make all module parameters static + + Clean up to correct variable scope + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + V4L2: Request maximum resolution from GPU + + Get resolution information about the sensors from the GPU + and advertise it correctly. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + BCM2835-V4L2: Increase minimum resolution to 32x32 + + https://github.com/raspberrypi/linux/issues/1498 showed + up that 16x16 is failing to work on the GPU for some reason. + + GPU bug being tracked on + https://github.com/raspberrypi/firmware/issues/607 + Workaround here by increasing minimum resolution via V4L2 + to 32x32. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + [media]: bcm2835-camera: fix compilation error + + There is an error when compiling rpi-4.6.y branch: + CC [M] drivers/media/platform/bcm2835/bcm2835-camera.o + drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] + .queue_setup = queue_setup, + ^ + drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup') + + The const void *parg in setup_queue callback is not needed since commit: + df9ecb0cad14b952a2865f8b3af86b2bbadfab45. + This commit removes it. + + Signed-off-by: Slawomir Stepien + + bcm2835-camera: Fix max/min error when looping over cameras/resolutions + + See: https://github.com/raspberrypi/linux/issues/1447#issuecomment-221303506 + + BCM2835-V4L2: Correct handling for BGR24 vs RGB24. + + There was a bug in the GPU firmware that had reversed these + two formats. + Detect the old firmware, and reverse the formats if necessary. + + Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + + BCM2835-v4l2: Fix a conformance test failure + + Format ioctls: + test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK + warn: v4l2-test-formats.cpp(1195): S_PARM is supported but + doesn't report V4L2_CAP_TIMEPERFRAME. + fail: v4l2-test-formats.cpp(1118): node->has_frmintervals + && !cap->capability + +diff --git a/Documentation/video4linux/bcm2835-v4l2.txt b/Documentation/video4linux/bcm2835-v4l2.txt +new file mode 100644 +index 000000000000..c585a8fadf91 +--- /dev/null ++++ b/Documentation/video4linux/bcm2835-v4l2.txt +@@ -0,0 +1,60 @@ ++ ++BCM2835 (aka Raspberry Pi) V4L2 driver ++====================================== ++ ++1. Copyright ++============ ++ ++Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ ++2. License ++========== ++ ++This program is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2 of the License, or ++(at your option) any later version. ++ ++This program is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with this program; if not, write to the Free Software ++Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ ++3. Quick Start ++============== ++ ++You need a version 1.0 or later of v4l2-ctl, available from: ++ git://git.linuxtv.org/v4l-utils.git ++ ++$ sudo modprobe bcm2835-v4l2 ++ ++Turn on the overlay: ++ ++$ v4l2-ctl --overlay=1 ++ ++Turn off the overlay: ++ ++$ v4l2-ctl --overlay=0 ++ ++Set the capture format for video: ++ ++$ v4l2-ctl --set-fmt-video=width=1920,height=1088,pixelformat=4 ++ ++(Note: 1088 not 1080). ++ ++Capture: ++ ++$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264 ++ ++Stills capture: ++ ++$ v4l2-ctl --set-fmt-video=width=2592,height=1944,pixelformat=3 ++$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg ++ ++List of available formats: ++ ++$ v4l2-ctl --list-formats +diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig +index 5ff803efdc03..dc76b9e15949 100644 +--- a/drivers/media/platform/Kconfig ++++ b/drivers/media/platform/Kconfig +@@ -11,6 +11,8 @@ menuconfig V4L_PLATFORM_DRIVERS + + if V4L_PLATFORM_DRIVERS + ++source "drivers/media/platform/bcm2835/Kconfig" ++ + source "drivers/media/platform/marvell-ccic/Kconfig" + + config VIDEO_VIA_CAMERA +diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile +index 40b18d12726e..b9f01f61c500 100644 +--- a/drivers/media/platform/Makefile ++++ b/drivers/media/platform/Makefile +@@ -2,6 +2,8 @@ + # Makefile for the video capture/playback device drivers. + # + ++obj-$(CONFIG_VIDEO_BCM2835) += bcm2835/ ++ + obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o + + obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o +diff --git a/drivers/media/platform/bcm2835/Kconfig b/drivers/media/platform/bcm2835/Kconfig +new file mode 100644 +index 000000000000..58d5f9600d72 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Kconfig +@@ -0,0 +1,25 @@ ++# Broadcom VideoCore IV v4l2 camera support ++ ++config VIDEO_BCM2835 ++ bool "Broadcom BCM2835 camera interface driver" ++ depends on VIDEO_V4L2 && ARCH_BCM2835 ++ ---help--- ++ Say Y here to enable camera host interface devices for ++ Broadcom BCM2835 SoC. This operates over the VCHIQ interface ++ to a service running on VideoCore. ++ ++ ++if VIDEO_BCM2835 ++ ++config VIDEO_BCM2835_MMAL ++ tristate "Broadcom BM2835 MMAL camera interface driver" ++ depends on BCM2708_VCHIQ ++ select VIDEOBUF2_VMALLOC ++ ---help--- ++ This is a V4L2 driver for the Broadcom BCM2835 MMAL camera host interface ++ ++ To compile this driver as a module, choose M here: the ++ module will be called bcm2835-v4l2.o ++ ++ ++endif # VIDEO_BM2835 +diff --git a/drivers/media/platform/bcm2835/Makefile b/drivers/media/platform/bcm2835/Makefile +new file mode 100644 +index 000000000000..b14ea91ac79c +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Makefile +@@ -0,0 +1,5 @@ ++bcm2835-v4l2-objs := bcm2835-camera.o controls.o mmal-vchiq.o ++ ++obj-$(CONFIG_VIDEO_BCM2835_MMAL) += bcm2835-v4l2.o ++ ++ccflags-$(CONFIG_VIDEO_BCM2835) += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.c b/drivers/media/platform/bcm2835/bcm2835-camera.c +new file mode 100644 +index 000000000000..4f03949aecf3 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -0,0 +1,2016 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-encodings.h" ++#include "mmal-vchiq.h" ++#include "mmal-msg.h" ++#include "mmal-parameters.h" ++#include "bcm2835-camera.h" ++ ++#define BM2835_MMAL_VERSION "0.0.2" ++#define BM2835_MMAL_MODULE_NAME "bcm2835-v4l2" ++#define MIN_WIDTH 32 ++#define MIN_HEIGHT 32 ++#define MIN_BUFFER_SIZE (80*1024) ++ ++#define MAX_VIDEO_MODE_WIDTH 1280 ++#define MAX_VIDEO_MODE_HEIGHT 720 ++ ++#define MAX_BCM2835_CAMERAS 2 ++ ++MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); ++MODULE_AUTHOR("Vincent Sanders"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(BM2835_MMAL_VERSION); ++ ++int bcm2835_v4l2_debug; ++module_param_named(debug, bcm2835_v4l2_debug, int, 0644); ++MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2"); ++ ++#define UNSET (-1) ++static int video_nr[] = {[0 ... (MAX_BCM2835_CAMERAS - 1)] = UNSET }; ++module_param_array(video_nr, int, NULL, 0644); ++MODULE_PARM_DESC(video_nr, "videoX start numbers, -1 is autodetect"); ++ ++static int max_video_width = MAX_VIDEO_MODE_WIDTH; ++static int max_video_height = MAX_VIDEO_MODE_HEIGHT; ++module_param(max_video_width, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(max_video_width, "Threshold for video mode"); ++module_param(max_video_height, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(max_video_height, "Threshold for video mode"); ++ ++/* Gstreamer bug https://bugzilla.gnome.org/show_bug.cgi?id=726521 ++ * v4l2src does bad (and actually wrong) things when the vidioc_enum_framesizes ++ * function says type V4L2_FRMSIZE_TYPE_STEPWISE, which we do by default. ++ * It's happier if we just don't say anything at all, when it then ++ * sets up a load of defaults that it thinks might work. ++ * If gst_v4l2src_is_broken is non-zero, then we remove the function from ++ * our function table list (actually switch to an alternate set, but same ++ * result). ++ */ ++static int gst_v4l2src_is_broken; ++module_param(gst_v4l2src_is_broken, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(gst_v4l2src_is_broken, "If non-zero, enable workaround for Gstreamer"); ++ ++/* global device data array */ ++static struct bm2835_mmal_dev *gdev[MAX_BCM2835_CAMERAS]; ++ ++#define FPS_MIN 1 ++#define FPS_MAX 90 ++ ++/* timeperframe: min/max and default */ ++static const struct v4l2_fract ++ tpf_min = {.numerator = 1, .denominator = FPS_MAX}, ++ tpf_max = {.numerator = 1, .denominator = FPS_MIN}, ++ tpf_default = {.numerator = 1000, .denominator = 30000}; ++ ++/* video formats */ ++static struct mmal_fmt formats[] = { ++ { ++ .name = "4:2:0, planar, YUV", ++ .fourcc = V4L2_PIX_FMT_YUV420, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_I420, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "4:2:2, packed, YUYV", ++ .fourcc = V4L2_PIX_FMT_YUYV, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YUYV, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "RGB24 (LE)", ++ .fourcc = V4L2_PIX_FMT_RGB24, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_RGB24, ++ .depth = 24, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 3, ++ }, ++ { ++ .name = "JPEG", ++ .fourcc = V4L2_PIX_FMT_JPEG, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_JPEG, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "H264", ++ .fourcc = V4L2_PIX_FMT_H264, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_H264, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "MJPEG", ++ .fourcc = V4L2_PIX_FMT_MJPEG, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_MJPEG, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "4:2:2, packed, YVYU", ++ .fourcc = V4L2_PIX_FMT_YVYU, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YVYU, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:2, packed, VYUY", ++ .fourcc = V4L2_PIX_FMT_VYUY, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_VYUY, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:2, packed, UYVY", ++ .fourcc = V4L2_PIX_FMT_UYVY, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_UYVY, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:0, planar, NV12", ++ .fourcc = V4L2_PIX_FMT_NV12, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_NV12, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "RGB24 (BE)", ++ .fourcc = V4L2_PIX_FMT_BGR24, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_BGR24, ++ .depth = 24, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 3, ++ }, ++ { ++ .name = "4:2:0, planar, YVU", ++ .fourcc = V4L2_PIX_FMT_YVU420, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YV12, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "4:2:0, planar, NV21", ++ .fourcc = V4L2_PIX_FMT_NV21, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_NV21, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "RGB32 (BE)", ++ .fourcc = V4L2_PIX_FMT_BGR32, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_BGRA, ++ .depth = 32, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 4, ++ }, ++}; ++ ++static struct mmal_fmt *get_format(struct v4l2_format *f) ++{ ++ struct mmal_fmt *fmt; ++ unsigned int k; ++ ++ for (k = 0; k < ARRAY_SIZE(formats); k++) { ++ fmt = &formats[k]; ++ if (fmt->fourcc == f->fmt.pix.pixelformat) ++ break; ++ } ++ ++ if (k == ARRAY_SIZE(formats)) ++ return NULL; ++ ++ return &formats[k]; ++} ++ ++/* ------------------------------------------------------------------ ++ Videobuf queue operations ++ ------------------------------------------------------------------*/ ++ ++static int queue_setup(struct vb2_queue *vq, ++ unsigned int *nbuffers, unsigned int *nplanes, ++ unsigned int sizes[], struct device *alloc_ctxs[]) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ unsigned long size; ++ ++ /* refuse queue setup if port is not configured */ ++ if (dev->capture.port == NULL) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: capture port not configured\n", __func__); ++ return -EINVAL; ++ } ++ ++ size = dev->capture.port->current_buffer.size; ++ if (size == 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: capture port buffer size is zero\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (*nbuffers < (dev->capture.port->current_buffer.num + 2)) ++ *nbuffers = (dev->capture.port->current_buffer.num + 2); ++ ++ *nplanes = 1; ++ ++ sizes[0] = size; ++ ++ /* ++ * videobuf2-vmalloc allocator is context-less so no need to set ++ * alloc_ctxs array. ++ */ ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ return 0; ++} ++ ++static int buffer_prepare(struct vb2_buffer *vb) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); ++ unsigned long size; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ BUG_ON(dev->capture.port == NULL); ++ BUG_ON(dev->capture.fmt == NULL); ++ ++ size = dev->capture.stride * dev->capture.height; ++ if (vb2_plane_size(vb, 0) < size) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s data will not fit into plane (%lu < %lu)\n", ++ __func__, vb2_plane_size(vb, 0), size); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static inline bool is_capturing(struct bm2835_mmal_dev *dev) ++{ ++ return dev->capture.camera_port == ++ &dev-> ++ component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE]; ++} ++ ++static void buffer_cb(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ int status, ++ struct mmal_buffer *buf, ++ unsigned long length, u32 mmal_flags, s64 dts, s64 pts) ++{ ++ struct bm2835_mmal_dev *dev = port->cb_ctx; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", ++ __func__, status, buf, length, mmal_flags, pts); ++ ++ if (status != 0) { ++ /* error in transfer */ ++ if (buf != NULL) { ++ /* there was a buffer with the error so return it */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ } ++ return; ++ } else if (length == 0) { ++ /* stream ended */ ++ if (buf != NULL) { ++ /* this should only ever happen if the port is ++ * disabled and there are buffers still queued ++ */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ pr_debug("Empty buffer"); ++ } else if (dev->capture.frame_count) { ++ /* grab another frame */ ++ if (is_capturing(dev)) { ++ pr_debug("Grab another frame"); ++ vchiq_mmal_port_parameter_set( ++ instance, ++ dev->capture. ++ camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture. ++ frame_count, ++ sizeof(dev->capture.frame_count)); ++ } ++ } else { ++ /* signal frame completion */ ++ complete(&dev->capture.frame_cmplt); ++ } ++ } else { ++ if (dev->capture.frame_count) { ++ if (dev->capture.vc_start_timestamp != -1 && ++ pts != 0) { ++ struct timeval timestamp; ++ s64 runtime_us = pts - ++ dev->capture.vc_start_timestamp; ++ u32 div = 0; ++ u32 rem = 0; ++ ++ div = ++ div_u64_rem(runtime_us, USEC_PER_SEC, &rem); ++ timestamp.tv_sec = ++ dev->capture.kernel_start_ts.tv_sec + div; ++ timestamp.tv_usec = ++ dev->capture.kernel_start_ts.tv_usec + rem; ++ ++ if (timestamp.tv_usec >= ++ USEC_PER_SEC) { ++ timestamp.tv_sec++; ++ timestamp.tv_usec -= ++ USEC_PER_SEC; ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Convert start time %d.%06d and %llu " ++ "with offset %llu to %d.%06d\n", ++ (int)dev->capture.kernel_start_ts. ++ tv_sec, ++ (int)dev->capture.kernel_start_ts. ++ tv_usec, ++ dev->capture.vc_start_timestamp, pts, ++ (int)timestamp.tv_sec, ++ (int)timestamp.tv_usec); ++ buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + ++ timestamp.tv_usec * 1000ULL; ++ } else { ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ } ++ ++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); ++ ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && ++ is_capturing(dev)) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Grab another frame as buffer has EOS"); ++ vchiq_mmal_port_parameter_set( ++ instance, ++ dev->capture. ++ camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture. ++ frame_count, ++ sizeof(dev->capture.frame_count)); ++ } ++ } else { ++ /* signal frame completion */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ complete(&dev->capture.frame_cmplt); ++ } ++ } ++} ++ ++static int enable_camera(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ if (!dev->camera_use_count) { ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ MMAL_PARAMETER_CAMERA_NUM, &dev->camera_num, ++ sizeof(dev->camera_num)); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed setting camera num, ret %d\n", ret); ++ return -EINVAL; ++ } ++ ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed enabling camera, ret %d\n", ret); ++ return -EINVAL; ++ } ++ } ++ dev->camera_use_count++; ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, "enabled camera (refcount %d)\n", ++ dev->camera_use_count); ++ return 0; ++} ++ ++static int disable_camera(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ if (!dev->camera_use_count) { ++ v4l2_err(&dev->v4l2_dev, ++ "Disabled the camera when already disabled\n"); ++ return -EINVAL; ++ } ++ dev->camera_use_count--; ++ if (!dev->camera_use_count) { ++ unsigned int i = 0xFFFFFFFF; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Disabling camera\n"); ++ ret = ++ vchiq_mmal_component_disable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed disabling camera, ret %d\n", ret); ++ return -EINVAL; ++ } ++ vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ MMAL_PARAMETER_CAMERA_NUM, &i, ++ sizeof(i)); ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Camera refcount now %d\n", dev->camera_use_count); ++ return 0; ++} ++ ++static void buffer_queue(struct vb2_buffer *vb) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); ++ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); ++ struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); ++ int ret; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: dev:%p buf:%p\n", __func__, dev, buf); ++ ++ buf->buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); ++ buf->buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); ++ ++ ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf); ++ if (ret < 0) ++ v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n", ++ __func__); ++} ++ ++static int start_streaming(struct vb2_queue *vq, unsigned int count) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ int ret; ++ int parameter_size; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ /* ensure a format has actually been set */ ++ if (dev->capture.port == NULL) ++ return -EINVAL; ++ ++ if (enable_camera(dev) < 0) { ++ v4l2_err(&dev->v4l2_dev, "Failed to enable camera\n"); ++ return -EINVAL; ++ } ++ ++ /*init_completion(&dev->capture.frame_cmplt); */ ++ ++ /* enable frame capture */ ++ dev->capture.frame_count = 1; ++ ++ /* if the preview is not already running, wait for a few frames for AGC ++ * to settle down. ++ */ ++ if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled) ++ msleep(300); ++ ++ /* enable the connection from camera to encoder (if applicable) */ ++ if (dev->capture.camera_port != dev->capture.port ++ && dev->capture.camera_port) { ++ ret = vchiq_mmal_port_enable(dev->instance, ++ dev->capture.camera_port, NULL); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to enable encode tunnel - error %d\n", ++ ret); ++ return -1; ++ } ++ } ++ ++ /* Get VC timestamp at this point in time */ ++ parameter_size = sizeof(dev->capture.vc_start_timestamp); ++ if (vchiq_mmal_port_parameter_get(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_SYSTEM_TIME, ++ &dev->capture.vc_start_timestamp, ++ ¶meter_size)) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to get VC start time - update your VC f/w\n"); ++ ++ /* Flag to indicate just to rely on kernel timestamps */ ++ dev->capture.vc_start_timestamp = -1; ++ } else ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Start time %lld size %d\n", ++ dev->capture.vc_start_timestamp, parameter_size); ++ ++ v4l2_get_timestamp(&dev->capture.kernel_start_ts); ++ ++ /* enable the camera port */ ++ dev->capture.port->cb_ctx = dev; ++ ret = ++ vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to enable capture port - error %d. " ++ "Disabling camera port again\n", ret); ++ ++ vchiq_mmal_port_disable(dev->instance, ++ dev->capture.camera_port); ++ if (disable_camera(dev) < 0) { ++ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); ++ return -EINVAL; ++ } ++ return -1; ++ } ++ ++ /* capture the first frame */ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture.frame_count, ++ sizeof(dev->capture.frame_count)); ++ return 0; ++} ++ ++/* abort streaming and wait for last buffer */ ++static void stop_streaming(struct vb2_queue *vq) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ init_completion(&dev->capture.frame_cmplt); ++ dev->capture.frame_count = 0; ++ ++ /* ensure a format has actually been set */ ++ if (dev->capture.port == NULL) { ++ v4l2_err(&dev->v4l2_dev, ++ "no capture port - stream not started?\n"); ++ return; ++ } ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "stopping capturing\n"); ++ ++ /* stop capturing frames */ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture.frame_count, ++ sizeof(dev->capture.frame_count)); ++ ++ /* wait for last frame to complete */ ++ ret = wait_for_completion_timeout(&dev->capture.frame_cmplt, HZ); ++ if (ret <= 0) ++ v4l2_err(&dev->v4l2_dev, ++ "error %d waiting for frame completion\n", ret); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "disabling connection\n"); ++ ++ /* disable the connection from camera to encoder */ ++ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port); ++ if (!ret && dev->capture.camera_port != dev->capture.port) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "disabling port\n"); ++ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port); ++ } else if (dev->capture.camera_port != dev->capture.port) { ++ v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n", ++ ret); ++ } ++ ++ if (disable_camera(dev) < 0) ++ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); ++} ++ ++static void bm2835_mmal_lock(struct vb2_queue *vq) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ mutex_lock(&dev->mutex); ++} ++ ++static void bm2835_mmal_unlock(struct vb2_queue *vq) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ mutex_unlock(&dev->mutex); ++} ++ ++static struct vb2_ops bm2835_mmal_video_qops = { ++ .queue_setup = queue_setup, ++ .buf_prepare = buffer_prepare, ++ .buf_queue = buffer_queue, ++ .start_streaming = start_streaming, ++ .stop_streaming = stop_streaming, ++ .wait_prepare = bm2835_mmal_unlock, ++ .wait_finish = bm2835_mmal_lock, ++}; ++ ++/* ------------------------------------------------------------------ ++ IOCTL operations ++ ------------------------------------------------------------------*/ ++ ++static int set_overlay_params(struct bm2835_mmal_dev *dev, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_parameter_displayregion prev_config = { ++ .set = MMAL_DISPLAY_SET_LAYER | MMAL_DISPLAY_SET_ALPHA | ++ MMAL_DISPLAY_SET_DEST_RECT | MMAL_DISPLAY_SET_FULLSCREEN, ++ .layer = PREVIEW_LAYER, ++ .alpha = dev->overlay.global_alpha, ++ .fullscreen = 0, ++ .dest_rect = { ++ .x = dev->overlay.w.left, ++ .y = dev->overlay.w.top, ++ .width = dev->overlay.w.width, ++ .height = dev->overlay.w.height, ++ }, ++ }; ++ ret = vchiq_mmal_port_parameter_set(dev->instance, port, ++ MMAL_PARAMETER_DISPLAYREGION, ++ &prev_config, sizeof(prev_config)); ++ ++ return ret; ++} ++ ++/* overlay ioctl */ ++static int vidioc_enum_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct mmal_fmt *fmt; ++ ++ if (f->index >= ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ fmt = &formats[f->index]; ++ ++ strlcpy(f->description, fmt->name, sizeof(f->description)); ++ f->pixelformat = fmt->fourcc; ++ f->flags = fmt->flags; ++ ++ return 0; ++} ++ ++static int vidioc_g_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.win = dev->overlay; ++ ++ return 0; ++} ++ ++static int vidioc_try_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.win.field = V4L2_FIELD_NONE; ++ f->fmt.win.chromakey = 0; ++ f->fmt.win.clips = NULL; ++ f->fmt.win.clipcount = 0; ++ f->fmt.win.bitmap = NULL; ++ ++ v4l_bound_align_image(&f->fmt.win.w.width, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.win.w.height, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ v4l_bound_align_image(&f->fmt.win.w.left, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.win.w.top, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Overlay: Now w/h %dx%d l/t %dx%d\n", ++ f->fmt.win.w.width, f->fmt.win.w.height, ++ f->fmt.win.w.left, f->fmt.win.w.top); ++ ++ v4l2_dump_win_format(1, ++ bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ &f->fmt.win, ++ __func__); ++ return 0; ++} ++ ++static int vidioc_s_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ vidioc_try_fmt_vid_overlay(file, priv, f); ++ ++ dev->overlay = f->fmt.win; ++ if (dev->component[MMAL_COMPONENT_PREVIEW]->enabled) { ++ set_overlay_params(dev, ++ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ } ++ ++ return 0; ++} ++ ++static int vidioc_overlay(struct file *file, void *f, unsigned int on) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct vchiq_mmal_port *src; ++ struct vchiq_mmal_port *dst; ++ if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) || ++ (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled)) ++ return 0; /* already in requested state */ ++ ++ src = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ ++ if (!on) { ++ /* disconnect preview ports and disable component */ ++ ret = vchiq_mmal_port_disable(dev->instance, src); ++ if (!ret) ++ ret = ++ vchiq_mmal_port_connect_tunnel(dev->instance, src, ++ NULL); ++ if (ret >= 0) ++ ret = vchiq_mmal_component_disable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++ disable_camera(dev); ++ return ret; ++ } ++ ++ /* set preview port format and connect it to output */ ++ dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]; ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, src); ++ if (ret < 0) ++ goto error; ++ ++ ret = set_overlay_params(dev, dst); ++ if (ret < 0) ++ goto error; ++ ++ if (enable_camera(dev) < 0) ++ goto error; ++ ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ if (ret < 0) ++ goto error; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n", ++ src, dst); ++ ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst); ++ if (!ret) ++ ret = vchiq_mmal_port_enable(dev->instance, src, NULL); ++error: ++ return ret; ++} ++ ++static int vidioc_g_fbuf(struct file *file, void *fh, ++ struct v4l2_framebuffer *a) ++{ ++ /* The video overlay must stay within the framebuffer and can't be ++ positioned independently. */ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct vchiq_mmal_port *preview_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ ++ a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | ++ V4L2_FBUF_CAP_GLOBAL_ALPHA; ++ a->flags = V4L2_FBUF_FLAG_OVERLAY; ++ a->fmt.width = preview_port->es.video.width; ++ a->fmt.height = preview_port->es.video.height; ++ a->fmt.pixelformat = V4L2_PIX_FMT_YUV420; ++ a->fmt.bytesperline = preview_port->es.video.width; ++ a->fmt.sizeimage = (preview_port->es.video.width * ++ preview_port->es.video.height * 3)>>1; ++ a->fmt.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ ++ return 0; ++} ++ ++/* input ioctls */ ++static int vidioc_enum_input(struct file *file, void *priv, ++ struct v4l2_input *inp) ++{ ++ /* only a single camera input */ ++ if (inp->index != 0) ++ return -EINVAL; ++ ++ inp->type = V4L2_INPUT_TYPE_CAMERA; ++ sprintf(inp->name, "Camera %u", inp->index); ++ return 0; ++} ++ ++static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) ++{ ++ *i = 0; ++ return 0; ++} ++ ++static int vidioc_s_input(struct file *file, void *priv, unsigned int i) ++{ ++ if (i != 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++/* capture ioctls */ ++static int vidioc_querycap(struct file *file, void *priv, ++ struct v4l2_capability *cap) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ u32 major; ++ u32 minor; ++ ++ vchiq_mmal_version(dev->instance, &major, &minor); ++ ++ strcpy(cap->driver, "bm2835 mmal"); ++ snprintf(cap->card, sizeof(cap->card), "mmal service %d.%d", ++ major, minor); ++ ++ snprintf(cap->bus_info, sizeof(cap->bus_info), ++ "platform:%s", dev->v4l2_dev.name); ++ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | ++ V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; ++ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; ++ ++ return 0; ++} ++ ++static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct mmal_fmt *fmt; ++ ++ if (f->index >= ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ fmt = &formats[f->index]; ++ ++ strlcpy(f->description, fmt->name, sizeof(f->description)); ++ f->pixelformat = fmt->fourcc; ++ f->flags = fmt->flags; ++ ++ return 0; ++} ++ ++static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.pix.width = dev->capture.width; ++ f->fmt.pix.height = dev->capture.height; ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ f->fmt.pix.pixelformat = dev->capture.fmt->fourcc; ++ f->fmt.pix.bytesperline = dev->capture.stride; ++ f->fmt.pix.sizeimage = dev->capture.buffersize; ++ ++ if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_RGB24) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; ++ else if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_JPEG) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; ++ else ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ f->fmt.pix.priv = 0; ++ ++ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, ++ __func__); ++ return 0; ++} ++ ++static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct mmal_fmt *mfmt; ++ ++ mfmt = get_format(f); ++ if (!mfmt) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Fourcc format (0x%08x) unknown.\n", ++ f->fmt.pix.pixelformat); ++ f->fmt.pix.pixelformat = formats[0].fourcc; ++ mfmt = get_format(f); ++ } ++ ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Clipping/aligning %dx%d format %08X\n", ++ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); ++ ++ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.pix.height, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp; ++ ++ /* Image buffer has to be padded to allow for alignment, even though ++ * we then remove that padding before delivering the buffer. ++ */ ++ f->fmt.pix.sizeimage = ((f->fmt.pix.height+15)&~15) * ++ (((f->fmt.pix.width+31)&~31) * mfmt->depth) >> 3; ++ ++ if ((mfmt->flags & V4L2_FMT_FLAG_COMPRESSED) && ++ f->fmt.pix.sizeimage < MIN_BUFFER_SIZE) ++ f->fmt.pix.sizeimage = MIN_BUFFER_SIZE; ++ ++ if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; ++ else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_JPEG) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; ++ else ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ f->fmt.pix.priv = 0; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Now %dx%d format %08X\n", ++ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); ++ ++ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, ++ __func__); ++ return 0; ++} ++ ++static int mmal_setup_components(struct bm2835_mmal_dev *dev, ++ struct v4l2_format *f) ++{ ++ int ret; ++ struct vchiq_mmal_port *port = NULL, *camera_port = NULL; ++ struct vchiq_mmal_component *encode_component = NULL; ++ struct mmal_fmt *mfmt = get_format(f); ++ ++ BUG_ON(!mfmt); ++ ++ if (dev->capture.encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "vid_cap - disconnect previous tunnel\n"); ++ ++ /* Disconnect any previous connection */ ++ vchiq_mmal_port_connect_tunnel(dev->instance, ++ dev->capture.camera_port, NULL); ++ dev->capture.camera_port = NULL; ++ ret = vchiq_mmal_component_disable(dev->instance, ++ dev->capture. ++ encode_component); ++ if (ret) ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to disable encode component %d\n", ++ ret); ++ ++ dev->capture.encode_component = NULL; ++ } ++ /* format dependant port setup */ ++ switch (mfmt->mmal_component) { ++ case MMAL_COMPONENT_CAMERA: ++ /* Make a further decision on port based on resolution */ ++ if (f->fmt.pix.width <= max_video_width ++ && f->fmt.pix.height <= max_video_height) ++ camera_port = port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]; ++ else ++ camera_port = port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE]; ++ break; ++ case MMAL_COMPONENT_IMAGE_ENCODE: ++ encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE]; ++ port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ camera_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE]; ++ break; ++ case MMAL_COMPONENT_VIDEO_ENCODE: ++ encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE]; ++ port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ camera_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]; ++ break; ++ default: ++ break; ++ } ++ ++ if (!port) ++ return -EINVAL; ++ ++ if (encode_component) ++ camera_port->format.encoding = MMAL_ENCODING_OPAQUE; ++ else ++ camera_port->format.encoding = mfmt->mmal; ++ ++ if (dev->rgb_bgr_swapped) { ++ if (camera_port->format.encoding == MMAL_ENCODING_RGB24) ++ camera_port->format.encoding = MMAL_ENCODING_BGR24; ++ else if (camera_port->format.encoding == MMAL_ENCODING_BGR24) ++ camera_port->format.encoding = MMAL_ENCODING_RGB24; ++ } ++ ++ camera_port->format.encoding_variant = 0; ++ camera_port->es.video.width = f->fmt.pix.width; ++ camera_port->es.video.height = f->fmt.pix.height; ++ camera_port->es.video.crop.x = 0; ++ camera_port->es.video.crop.y = 0; ++ camera_port->es.video.crop.width = f->fmt.pix.width; ++ camera_port->es.video.crop.height = f->fmt.pix.height; ++ camera_port->es.video.frame_rate.num = 0; ++ camera_port->es.video.frame_rate.den = 1; ++ camera_port->es.video.color_space = MMAL_COLOR_SPACE_JPEG_JFIF; ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, camera_port); ++ ++ if (!ret ++ && camera_port == ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]) { ++ bool overlay_enabled = ++ !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled; ++ struct vchiq_mmal_port *preview_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ /* Preview and encode ports need to match on resolution */ ++ if (overlay_enabled) { ++ /* Need to disable the overlay before we can update ++ * the resolution ++ */ ++ ret = ++ vchiq_mmal_port_disable(dev->instance, ++ preview_port); ++ if (!ret) ++ ret = ++ vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ preview_port, ++ NULL); ++ } ++ preview_port->es.video.width = f->fmt.pix.width; ++ preview_port->es.video.height = f->fmt.pix.height; ++ preview_port->es.video.crop.x = 0; ++ preview_port->es.video.crop.y = 0; ++ preview_port->es.video.crop.width = f->fmt.pix.width; ++ preview_port->es.video.crop.height = f->fmt.pix.height; ++ preview_port->es.video.frame_rate.num = ++ dev->capture.timeperframe.denominator; ++ preview_port->es.video.frame_rate.den = ++ dev->capture.timeperframe.numerator; ++ ret = vchiq_mmal_port_set_format(dev->instance, preview_port); ++ if (overlay_enabled) { ++ ret = vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ preview_port, ++ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ if (!ret) ++ ret = vchiq_mmal_port_enable(dev->instance, ++ preview_port, ++ NULL); ++ } ++ } ++ ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s failed to set format %dx%d %08X\n", __func__, ++ f->fmt.pix.width, f->fmt.pix.height, ++ f->fmt.pix.pixelformat); ++ /* ensure capture is not going to be tried */ ++ dev->capture.port = NULL; ++ } else { ++ if (encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "vid_cap - set up encode comp\n"); ++ ++ /* configure buffering */ ++ camera_port->current_buffer.size = ++ camera_port->recommended_buffer.size; ++ camera_port->current_buffer.num = ++ camera_port->recommended_buffer.num; ++ ++ ret = ++ vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ camera_port, ++ &encode_component->input[0]); ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s failed to create connection\n", ++ __func__); ++ /* ensure capture is not going to be tried */ ++ dev->capture.port = NULL; ++ } else { ++ port->es.video.width = f->fmt.pix.width; ++ port->es.video.height = f->fmt.pix.height; ++ port->es.video.crop.x = 0; ++ port->es.video.crop.y = 0; ++ port->es.video.crop.width = f->fmt.pix.width; ++ port->es.video.crop.height = f->fmt.pix.height; ++ port->es.video.frame_rate.num = ++ dev->capture.timeperframe.denominator; ++ port->es.video.frame_rate.den = ++ dev->capture.timeperframe.numerator; ++ ++ port->format.encoding = mfmt->mmal; ++ port->format.encoding_variant = 0; ++ /* Set any encoding specific parameters */ ++ switch (mfmt->mmal_component) { ++ case MMAL_COMPONENT_VIDEO_ENCODE: ++ port->format.bitrate = ++ dev->capture.encode_bitrate; ++ break; ++ case MMAL_COMPONENT_IMAGE_ENCODE: ++ /* Could set EXIF parameters here */ ++ break; ++ default: ++ break; ++ } ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ port); ++ if (ret) ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s failed to set format %dx%d fmt %08X\n", ++ __func__, ++ f->fmt.pix.width, ++ f->fmt.pix.height, ++ f->fmt.pix.pixelformat ++ ); ++ } ++ ++ if (!ret) { ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ encode_component); ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s Failed to enable encode components\n", ++ __func__); ++ } ++ } ++ if (!ret) { ++ /* configure buffering */ ++ port->current_buffer.num = 1; ++ port->current_buffer.size = ++ f->fmt.pix.sizeimage; ++ if (port->format.encoding == ++ MMAL_ENCODING_JPEG) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "JPG - buf size now %d was %d\n", ++ f->fmt.pix.sizeimage, ++ port->current_buffer.size); ++ port->current_buffer.size = ++ (f->fmt.pix.sizeimage < ++ (100 << 10)) ++ ? (100 << 10) : f->fmt.pix. ++ sizeimage; ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "vid_cap - cur_buf.size set to %d\n", ++ f->fmt.pix.sizeimage); ++ port->current_buffer.alignment = 0; ++ } ++ } else { ++ /* configure buffering */ ++ camera_port->current_buffer.num = 1; ++ camera_port->current_buffer.size = f->fmt.pix.sizeimage; ++ camera_port->current_buffer.alignment = 0; ++ } ++ ++ if (!ret) { ++ dev->capture.fmt = mfmt; ++ dev->capture.stride = f->fmt.pix.bytesperline; ++ dev->capture.width = camera_port->es.video.crop.width; ++ dev->capture.height = camera_port->es.video.crop.height; ++ dev->capture.buffersize = port->current_buffer.size; ++ ++ /* select port for capture */ ++ dev->capture.port = port; ++ dev->capture.camera_port = camera_port; ++ dev->capture.encode_component = encode_component; ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "Set dev->capture.fmt %08X, %dx%d, stride %d, size %d", ++ port->format.encoding, ++ dev->capture.width, dev->capture.height, ++ dev->capture.stride, dev->capture.buffersize); ++ } ++ } ++ ++ /* todo: Need to convert the vchiq/mmal error into a v4l2 error. */ ++ return ret; ++} ++ ++static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct mmal_fmt *mfmt; ++ ++ /* try the format to set valid parameters */ ++ ret = vidioc_try_fmt_vid_cap(file, priv, f); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "vid_cap - vidioc_try_fmt_vid_cap failed\n"); ++ return ret; ++ } ++ ++ /* if a capture is running refuse to set format */ ++ if (vb2_is_busy(&dev->capture.vb_vidq)) { ++ v4l2_info(&dev->v4l2_dev, "%s device busy\n", __func__); ++ return -EBUSY; ++ } ++ ++ /* If the format is unsupported v4l2 says we should switch to ++ * a supported one and not return an error. */ ++ mfmt = get_format(f); ++ if (!mfmt) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Fourcc format (0x%08x) unknown.\n", ++ f->fmt.pix.pixelformat); ++ f->fmt.pix.pixelformat = formats[0].fourcc; ++ mfmt = get_format(f); ++ } ++ ++ ret = mmal_setup_components(dev, f); ++ if (ret != 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: failed to setup mmal components: %d\n", ++ __func__, ret); ++ ret = -EINVAL; ++ } ++ ++ return ret; ++} ++ ++int vidioc_enum_framesizes(struct file *file, void *fh, ++ struct v4l2_frmsizeenum *fsize) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ static const struct v4l2_frmsize_stepwise sizes = { ++ MIN_WIDTH, 0, 2, ++ MIN_HEIGHT, 0, 2 ++ }; ++ int i; ++ ++ if (fsize->index) ++ return -EINVAL; ++ for (i = 0; i < ARRAY_SIZE(formats); i++) ++ if (formats[i].fourcc == fsize->pixel_format) ++ break; ++ if (i == ARRAY_SIZE(formats)) ++ return -EINVAL; ++ fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; ++ fsize->stepwise = sizes; ++ fsize->stepwise.max_width = dev->max_width; ++ fsize->stepwise.max_height = dev->max_height; ++ return 0; ++} ++ ++/* timeperframe is arbitrary and continous */ ++static int vidioc_enum_frameintervals(struct file *file, void *priv, ++ struct v4l2_frmivalenum *fival) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ int i; ++ ++ if (fival->index) ++ return -EINVAL; ++ ++ for (i = 0; i < ARRAY_SIZE(formats); i++) ++ if (formats[i].fourcc == fival->pixel_format) ++ break; ++ if (i == ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ /* regarding width & height - we support any within range */ ++ if (fival->width < MIN_WIDTH || fival->width > dev->max_width || ++ fival->height < MIN_HEIGHT || fival->height > dev->max_height) ++ return -EINVAL; ++ ++ fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; ++ ++ /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ ++ fival->stepwise.min = tpf_min; ++ fival->stepwise.max = tpf_max; ++ fival->stepwise.step = (struct v4l2_fract) {1, 1}; ++ ++ return 0; ++} ++ ++static int vidioc_g_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; ++ parm->parm.capture.timeperframe = dev->capture.timeperframe; ++ parm->parm.capture.readbuffers = 1; ++ return 0; ++} ++ ++#define FRACT_CMP(a, OP, b) \ ++ ((u64)(a).numerator * (b).denominator OP \ ++ (u64)(b).numerator * (a).denominator) ++ ++static int vidioc_s_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct v4l2_fract tpf; ++ struct mmal_parameter_rational fps_param; ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ tpf = parm->parm.capture.timeperframe; ++ ++ /* tpf: {*, 0} resets timing; clip to [min, max]*/ ++ tpf = tpf.denominator ? tpf : tpf_default; ++ tpf = FRACT_CMP(tpf, <, tpf_min) ? tpf_min : tpf; ++ tpf = FRACT_CMP(tpf, >, tpf_max) ? tpf_max : tpf; ++ ++ dev->capture.timeperframe = tpf; ++ parm->parm.capture.timeperframe = tpf; ++ parm->parm.capture.readbuffers = 1; ++ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; ++ ++ fps_param.num = 0; /* Select variable fps, and then use ++ * FPS_RANGE to select the actual limits. ++ */ ++ fps_param.den = 1; ++ set_framerate_params(dev); ++ ++ return 0; ++} ++ ++static const struct v4l2_ioctl_ops camera0_ioctl_ops = { ++ /* overlay */ ++ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, ++ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, ++ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, ++ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, ++ .vidioc_overlay = vidioc_overlay, ++ .vidioc_g_fbuf = vidioc_g_fbuf, ++ ++ /* inputs */ ++ .vidioc_enum_input = vidioc_enum_input, ++ .vidioc_g_input = vidioc_g_input, ++ .vidioc_s_input = vidioc_s_input, ++ ++ /* capture */ ++ .vidioc_querycap = vidioc_querycap, ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ ++ /* buffer management */ ++ .vidioc_reqbufs = vb2_ioctl_reqbufs, ++ .vidioc_create_bufs = vb2_ioctl_create_bufs, ++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, ++ .vidioc_querybuf = vb2_ioctl_querybuf, ++ .vidioc_qbuf = vb2_ioctl_qbuf, ++ .vidioc_dqbuf = vb2_ioctl_dqbuf, ++ .vidioc_enum_framesizes = vidioc_enum_framesizes, ++ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ .vidioc_streamon = vb2_ioctl_streamon, ++ .vidioc_streamoff = vb2_ioctl_streamoff, ++ ++ .vidioc_log_status = v4l2_ctrl_log_status, ++ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++static const struct v4l2_ioctl_ops camera0_ioctl_ops_gstreamer = { ++ /* overlay */ ++ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, ++ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, ++ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, ++ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, ++ .vidioc_overlay = vidioc_overlay, ++ .vidioc_g_fbuf = vidioc_g_fbuf, ++ ++ /* inputs */ ++ .vidioc_enum_input = vidioc_enum_input, ++ .vidioc_g_input = vidioc_g_input, ++ .vidioc_s_input = vidioc_s_input, ++ ++ /* capture */ ++ .vidioc_querycap = vidioc_querycap, ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ ++ /* buffer management */ ++ .vidioc_reqbufs = vb2_ioctl_reqbufs, ++ .vidioc_create_bufs = vb2_ioctl_create_bufs, ++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, ++ .vidioc_querybuf = vb2_ioctl_querybuf, ++ .vidioc_qbuf = vb2_ioctl_qbuf, ++ .vidioc_dqbuf = vb2_ioctl_dqbuf, ++ /* Remove this function ptr to fix gstreamer bug ++ .vidioc_enum_framesizes = vidioc_enum_framesizes, */ ++ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ .vidioc_streamon = vb2_ioctl_streamon, ++ .vidioc_streamoff = vb2_ioctl_streamoff, ++ ++ .vidioc_log_status = v4l2_ctrl_log_status, ++ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++/* ------------------------------------------------------------------ ++ Driver init/finalise ++ ------------------------------------------------------------------*/ ++ ++static const struct v4l2_file_operations camera0_fops = { ++ .owner = THIS_MODULE, ++ .open = v4l2_fh_open, ++ .release = vb2_fop_release, ++ .read = vb2_fop_read, ++ .poll = vb2_fop_poll, ++ .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ ++ .mmap = vb2_fop_mmap, ++}; ++ ++static struct video_device vdev_template = { ++ .name = "camera0", ++ .fops = &camera0_fops, ++ .ioctl_ops = &camera0_ioctl_ops, ++ .release = video_device_release_empty, ++}; ++ ++/* Returns the number of cameras, and also the max resolution supported ++ * by those cameras. ++ */ ++static int get_num_cameras(struct vchiq_mmal_instance *instance, ++ unsigned int resolutions[][2], int num_resolutions) ++{ ++ int ret; ++ struct vchiq_mmal_component *cam_info_component; ++ struct mmal_parameter_camera_info_t cam_info = {0}; ++ int param_size = sizeof(cam_info); ++ int i; ++ ++ /* create a camera_info component */ ++ ret = vchiq_mmal_component_init(instance, "camera_info", ++ &cam_info_component); ++ if (ret < 0) ++ /* Unusual failure - let's guess one camera. */ ++ return 1; ++ ++ if (vchiq_mmal_port_parameter_get(instance, ++ &cam_info_component->control, ++ MMAL_PARAMETER_CAMERA_INFO, ++ &cam_info, ++ ¶m_size)) { ++ pr_info("Failed to get camera info\n"); ++ } ++ for (i = 0; ++ i < (cam_info.num_cameras > num_resolutions ? ++ num_resolutions : ++ cam_info.num_cameras); ++ i++) { ++ resolutions[i][0] = cam_info.cameras[i].max_width; ++ resolutions[i][1] = cam_info.cameras[i].max_height; ++ } ++ ++ vchiq_mmal_component_finalise(instance, ++ cam_info_component); ++ ++ return cam_info.num_cameras; ++} ++ ++static int set_camera_parameters(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *camera, ++ struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ struct mmal_parameter_camera_config cam_config = { ++ .max_stills_w = dev->max_width, ++ .max_stills_h = dev->max_height, ++ .stills_yuv422 = 1, ++ .one_shot_stills = 1, ++ .max_preview_video_w = (max_video_width > 1920) ? ++ max_video_width : 1920, ++ .max_preview_video_h = (max_video_height > 1088) ? ++ max_video_height : 1088, ++ .num_preview_video_frames = 3, ++ .stills_capture_circular_buffer_height = 0, ++ .fast_preview_resume = 0, ++ .use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RAW_STC ++ }; ++ ++ ret = vchiq_mmal_port_parameter_set(instance, &camera->control, ++ MMAL_PARAMETER_CAMERA_CONFIG, ++ &cam_config, sizeof(cam_config)); ++ return ret; ++} ++ ++#define MAX_SUPPORTED_ENCODINGS 20 ++ ++/* MMAL instance and component init */ ++static int __init mmal_init(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ struct mmal_es_format *format; ++ u32 bool_true = 1; ++ u32 supported_encodings[MAX_SUPPORTED_ENCODINGS]; ++ int param_size; ++ struct vchiq_mmal_component *camera; ++ ++ ret = vchiq_mmal_init(&dev->instance); ++ if (ret < 0) ++ return ret; ++ ++ /* get the camera component ready */ ++ ret = vchiq_mmal_component_init(dev->instance, "ril.camera", ++ &dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) ++ goto unreg_mmal; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { ++ ret = -EINVAL; ++ goto unreg_camera; ++ } ++ ++ ret = set_camera_parameters(dev->instance, ++ camera, ++ dev); ++ if (ret < 0) ++ goto unreg_camera; ++ ++ /* There was an error in the firmware that meant the camera component ++ * produced BGR instead of RGB. ++ * This is now fixed, but in order to support the old firmwares, we ++ * have to check. ++ */ ++ dev->rgb_bgr_swapped = true; ++ param_size = sizeof(supported_encodings); ++ ret = vchiq_mmal_port_parameter_get(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ &supported_encodings, ++ ¶m_size); ++ if (ret == 0) { ++ int i; ++ ++ for (i = 0; i < param_size/sizeof(u32); i++) { ++ if (supported_encodings[i] == MMAL_ENCODING_BGR24) { ++ /* Found BGR24 first - old firmware. */ ++ break; ++ } ++ if (supported_encodings[i] == MMAL_ENCODING_RGB24) { ++ /* Found RGB24 first ++ * new firmware, so use RGB24. ++ */ ++ dev->rgb_bgr_swapped = false; ++ break; ++ } ++ } ++ } ++ format = &camera->output[MMAL_CAMERA_PORT_PREVIEW].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ format->encoding_variant = MMAL_ENCODING_I420; ++ ++ format->es->video.width = 1024; ++ format->es->video.height = 768; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 1024; ++ format->es->video.crop.height = 768; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ format = &camera->output[MMAL_CAMERA_PORT_VIDEO].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ format->encoding_variant = MMAL_ENCODING_I420; ++ ++ format->es->video.width = 1024; ++ format->es->video.height = 768; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 1024; ++ format->es->video.crop.height = 768; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_VIDEO], ++ MMAL_PARAMETER_NO_IMAGE_PADDING, ++ &bool_true, sizeof(bool_true)); ++ ++ format = &camera->output[MMAL_CAMERA_PORT_CAPTURE].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ ++ format->es->video.width = 2592; ++ format->es->video.height = 1944; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 2592; ++ format->es->video.crop.height = 1944; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ dev->capture.width = format->es->video.width; ++ dev->capture.height = format->es->video.height; ++ dev->capture.fmt = &formats[0]; ++ dev->capture.encode_component = NULL; ++ dev->capture.timeperframe = tpf_default; ++ dev->capture.enc_profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH; ++ dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0; ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_NO_IMAGE_PADDING, ++ &bool_true, sizeof(bool_true)); ++ ++ /* get the preview component ready */ ++ ret = vchiq_mmal_component_init( ++ dev->instance, "ril.video_render", ++ &dev->component[MMAL_COMPONENT_PREVIEW]); ++ if (ret < 0) ++ goto unreg_camera; ++ ++ if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { ++ ret = -EINVAL; ++ pr_debug("too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); ++ goto unreg_preview; ++ } ++ ++ /* get the image encoder component ready */ ++ ret = vchiq_mmal_component_init( ++ dev->instance, "ril.image_encode", ++ &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ if (ret < 0) ++ goto unreg_preview; ++ ++ if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { ++ ret = -EINVAL; ++ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, ++ 1); ++ goto unreg_image_encoder; ++ } ++ ++ /* get the video encoder component ready */ ++ ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", ++ &dev-> ++ component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ if (ret < 0) ++ goto unreg_image_encoder; ++ ++ if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { ++ ret = -EINVAL; ++ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, ++ 1); ++ goto unreg_vid_encoder; ++ } ++ ++ { ++ struct vchiq_mmal_port *encoder_port = ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ encoder_port->format.encoding = MMAL_ENCODING_H264; ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ encoder_port); ++ } ++ ++ { ++ unsigned int enable = 1; ++ vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, ++ &enable, sizeof(enable)); ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, ++ &enable, ++ sizeof(enable)); ++ } ++ ret = bm2835_mmal_set_all_camera_controls(dev); ++ if (ret < 0) ++ goto unreg_vid_encoder; ++ ++ return 0; ++ ++unreg_vid_encoder: ++ pr_err("Cleanup: Destroy video encoder\n"); ++ vchiq_mmal_component_finalise( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ ++unreg_image_encoder: ++ pr_err("Cleanup: Destroy image encoder\n"); ++ vchiq_mmal_component_finalise( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ ++unreg_preview: ++ pr_err("Cleanup: Destroy video render\n"); ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++unreg_camera: ++ pr_err("Cleanup: Destroy camera\n"); ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++unreg_mmal: ++ vchiq_mmal_finalise(dev->instance); ++ return ret; ++} ++ ++static int __init bm2835_mmal_init_device(struct bm2835_mmal_dev *dev, ++ struct video_device *vfd) ++{ ++ int ret; ++ ++ *vfd = vdev_template; ++ if (gst_v4l2src_is_broken) { ++ v4l2_info(&dev->v4l2_dev, ++ "Work-around for gstreamer issue is active.\n"); ++ vfd->ioctl_ops = &camera0_ioctl_ops_gstreamer; ++ } ++ ++ vfd->v4l2_dev = &dev->v4l2_dev; ++ ++ vfd->lock = &dev->mutex; ++ ++ vfd->queue = &dev->capture.vb_vidq; ++ ++ /* video device needs to be able to access instance data */ ++ video_set_drvdata(vfd, dev); ++ ++ ret = video_register_device(vfd, ++ VFL_TYPE_GRABBER, ++ video_nr[dev->camera_num]); ++ if (ret < 0) ++ return ret; ++ ++ v4l2_info(vfd->v4l2_dev, ++ "V4L2 device registered as %s - stills mode > %dx%d\n", ++ video_device_node_name(vfd), max_video_width, max_video_height); ++ ++ return 0; ++} ++ ++void bcm2835_cleanup_instance(struct bm2835_mmal_dev *dev) ++{ ++ if (!dev) ++ return; ++ ++ v4l2_info(&dev->v4l2_dev, "unregistering %s\n", ++ video_device_node_name(&dev->vdev)); ++ ++ video_unregister_device(&dev->vdev); ++ ++ if (dev->capture.encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "mmal_exit - disconnect tunnel\n"); ++ vchiq_mmal_port_connect_tunnel(dev->instance, ++ dev->capture.camera_port, NULL); ++ vchiq_mmal_component_disable(dev->instance, ++ dev->capture.encode_component); ++ } ++ vchiq_mmal_component_disable(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev-> ++ component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev-> ++ component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++ v4l2_ctrl_handler_free(&dev->ctrl_handler); ++ ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ kfree(dev); ++} ++ ++static struct v4l2_format default_v4l2_format = { ++ .fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG, ++ .fmt.pix.width = 1024, ++ .fmt.pix.bytesperline = 0, ++ .fmt.pix.height = 768, ++ .fmt.pix.sizeimage = 1024*768, ++}; ++ ++static int __init bm2835_mmal_init(void) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev; ++ struct vb2_queue *q; ++ int camera; ++ unsigned int num_cameras; ++ struct vchiq_mmal_instance *instance; ++ unsigned int resolutions[MAX_BCM2835_CAMERAS][2]; ++ ++ ret = vchiq_mmal_init(&instance); ++ if (ret < 0) ++ return ret; ++ ++ num_cameras = get_num_cameras(instance, ++ resolutions, ++ MAX_BCM2835_CAMERAS); ++ if (num_cameras > MAX_BCM2835_CAMERAS) ++ num_cameras = MAX_BCM2835_CAMERAS; ++ ++ for (camera = 0; camera < num_cameras; camera++) { ++ dev = kzalloc(sizeof(struct bm2835_mmal_dev), GFP_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ ++ dev->camera_num = camera; ++ dev->max_width = resolutions[camera][0]; ++ dev->max_height = resolutions[camera][1]; ++ ++ /* setup device defaults */ ++ dev->overlay.w.left = 150; ++ dev->overlay.w.top = 50; ++ dev->overlay.w.width = 1024; ++ dev->overlay.w.height = 768; ++ dev->overlay.clipcount = 0; ++ dev->overlay.field = V4L2_FIELD_NONE; ++ dev->overlay.global_alpha = 255; ++ ++ dev->capture.fmt = &formats[3]; /* JPEG */ ++ ++ /* v4l device registration */ ++ snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), ++ "%s", BM2835_MMAL_MODULE_NAME); ++ ret = v4l2_device_register(NULL, &dev->v4l2_dev); ++ if (ret) ++ goto free_dev; ++ ++ /* setup v4l controls */ ++ ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); ++ if (ret < 0) ++ goto unreg_dev; ++ dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; ++ ++ /* mmal init */ ++ dev->instance = instance; ++ ret = mmal_init(dev); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* initialize queue */ ++ q = &dev->capture.vb_vidq; ++ memset(q, 0, sizeof(*q)); ++ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; ++ q->drv_priv = dev; ++ q->buf_struct_size = sizeof(struct mmal_buffer); ++ q->ops = &bm2835_mmal_video_qops; ++ q->mem_ops = &vb2_vmalloc_memops; ++ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; ++ ret = vb2_queue_init(q); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* v4l2 core mutex used to protect all fops and v4l2 ioctls. */ ++ mutex_init(&dev->mutex); ++ ++ /* initialise video devices */ ++ ret = bm2835_mmal_init_device(dev, &dev->vdev); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* Really want to call vidioc_s_fmt_vid_cap with the default ++ * format, but currently the APIs don't join up. ++ */ ++ ret = mmal_setup_components(dev, &default_v4l2_format); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: could not setup components\n", __func__); ++ goto unreg_dev; ++ } ++ ++ v4l2_info(&dev->v4l2_dev, ++ "Broadcom 2835 MMAL video capture ver %s loaded.\n", ++ BM2835_MMAL_VERSION); ++ ++ gdev[camera] = dev; ++ } ++ return 0; ++ ++unreg_dev: ++ v4l2_ctrl_handler_free(&dev->ctrl_handler); ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++free_dev: ++ kfree(dev); ++ ++ for ( ; camera > 0; camera--) { ++ bcm2835_cleanup_instance(gdev[camera]); ++ gdev[camera] = NULL; ++ } ++ pr_info("%s: error %d while loading driver\n", ++ BM2835_MMAL_MODULE_NAME, ret); ++ ++ return ret; ++} ++ ++static void __exit bm2835_mmal_exit(void) ++{ ++ int camera; ++ struct vchiq_mmal_instance *instance = gdev[0]->instance; ++ ++ for (camera = 0; camera < MAX_BCM2835_CAMERAS; camera++) { ++ bcm2835_cleanup_instance(gdev[camera]); ++ gdev[camera] = NULL; ++ } ++ vchiq_mmal_finalise(instance); ++} ++ ++module_init(bm2835_mmal_init); ++module_exit(bm2835_mmal_exit); +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.h b/drivers/media/platform/bcm2835/bcm2835-camera.h +new file mode 100644 +index 000000000000..e6aeb7e7e381 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.h +@@ -0,0 +1,145 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * core driver device ++ */ ++ ++#define V4L2_CTRL_COUNT 29 /* number of v4l controls */ ++ ++enum { ++ MMAL_COMPONENT_CAMERA = 0, ++ MMAL_COMPONENT_PREVIEW, ++ MMAL_COMPONENT_IMAGE_ENCODE, ++ MMAL_COMPONENT_VIDEO_ENCODE, ++ MMAL_COMPONENT_COUNT ++}; ++ ++enum { ++ MMAL_CAMERA_PORT_PREVIEW = 0, ++ MMAL_CAMERA_PORT_VIDEO, ++ MMAL_CAMERA_PORT_CAPTURE, ++ MMAL_CAMERA_PORT_COUNT ++}; ++ ++#define PREVIEW_LAYER 2 ++ ++extern int bcm2835_v4l2_debug; ++ ++struct bm2835_mmal_dev { ++ /* v4l2 devices */ ++ struct v4l2_device v4l2_dev; ++ struct video_device vdev; ++ struct mutex mutex; ++ ++ /* controls */ ++ struct v4l2_ctrl_handler ctrl_handler; ++ struct v4l2_ctrl *ctrls[V4L2_CTRL_COUNT]; ++ enum v4l2_scene_mode scene_mode; ++ struct mmal_colourfx colourfx; ++ int hflip; ++ int vflip; ++ int red_gain; ++ int blue_gain; ++ enum mmal_parameter_exposuremode exposure_mode_user; ++ enum v4l2_exposure_auto_type exposure_mode_v4l2_user; ++ /* active exposure mode may differ if selected via a scene mode */ ++ enum mmal_parameter_exposuremode exposure_mode_active; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++ unsigned int manual_shutter_speed; ++ bool exp_auto_priority; ++ bool manual_iso_enabled; ++ uint32_t iso; ++ ++ /* allocated mmal instance and components */ ++ struct vchiq_mmal_instance *instance; ++ struct vchiq_mmal_component *component[MMAL_COMPONENT_COUNT]; ++ int camera_use_count; ++ ++ struct v4l2_window overlay; ++ ++ struct { ++ unsigned int width; /* width */ ++ unsigned int height; /* height */ ++ unsigned int stride; /* stride */ ++ unsigned int buffersize; /* buffer size with padding */ ++ struct mmal_fmt *fmt; ++ struct v4l2_fract timeperframe; ++ ++ /* H264 encode bitrate */ ++ int encode_bitrate; ++ /* H264 bitrate mode. CBR/VBR */ ++ int encode_bitrate_mode; ++ /* H264 profile */ ++ enum v4l2_mpeg_video_h264_profile enc_profile; ++ /* H264 level */ ++ enum v4l2_mpeg_video_h264_level enc_level; ++ /* JPEG Q-factor */ ++ int q_factor; ++ ++ struct vb2_queue vb_vidq; ++ ++ /* VC start timestamp for streaming */ ++ s64 vc_start_timestamp; ++ /* Kernel start timestamp for streaming */ ++ struct timeval kernel_start_ts; ++ ++ struct vchiq_mmal_port *port; /* port being used for capture */ ++ /* camera port being used for capture */ ++ struct vchiq_mmal_port *camera_port; ++ /* component being used for encode */ ++ struct vchiq_mmal_component *encode_component; ++ /* number of frames remaining which driver should capture */ ++ unsigned int frame_count; ++ /* last frame completion */ ++ struct completion frame_cmplt; ++ ++ } capture; ++ ++ unsigned int camera_num; ++ unsigned int max_width; ++ unsigned int max_height; ++ unsigned int rgb_bgr_swapped; ++}; ++ ++int bm2835_mmal_init_controls( ++ struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl_handler *hdl); ++ ++int bm2835_mmal_set_all_camera_controls(struct bm2835_mmal_dev *dev); ++int set_framerate_params(struct bm2835_mmal_dev *dev); ++ ++/* Debug helpers */ ++ ++#define v4l2_dump_pix_format(level, debug, dev, pix_fmt, desc) \ ++{ \ ++ v4l2_dbg(level, debug, dev, \ ++"%s: w %u h %u field %u pfmt 0x%x bpl %u sz_img %u colorspace 0x%x priv %u\n", \ ++ desc == NULL ? "" : desc, \ ++ (pix_fmt)->width, (pix_fmt)->height, (pix_fmt)->field, \ ++ (pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \ ++ (pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \ ++} ++#define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \ ++{ \ ++ v4l2_dbg(level, debug, dev, \ ++"%s: w %u h %u l %u t %u field %u chromakey %06X clip %p " \ ++"clipcount %u bitmap %p\n", \ ++ desc == NULL ? "" : desc, \ ++ (win_fmt)->w.width, (win_fmt)->w.height, \ ++ (win_fmt)->w.left, (win_fmt)->w.top, \ ++ (win_fmt)->field, \ ++ (win_fmt)->chromakey, \ ++ (win_fmt)->clips, (win_fmt)->clipcount, \ ++ (win_fmt)->bitmap); \ ++} +diff --git a/drivers/media/platform/bcm2835/controls.c b/drivers/media/platform/bcm2835/controls.c +new file mode 100644 +index 000000000000..fe61330ba2a6 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/controls.c +@@ -0,0 +1,1345 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-vchiq.h" ++#include "mmal-parameters.h" ++#include "bcm2835-camera.h" ++ ++/* The supported V4L2_CID_AUTO_EXPOSURE_BIAS values are from -4.0 to +4.0. ++ * MMAL values are in 1/6th increments so the MMAL range is -24 to +24. ++ * V4L2 docs say value "is expressed in terms of EV, drivers should interpret ++ * the values as 0.001 EV units, where the value 1000 stands for +1 EV." ++ * V4L2 is limited to a max of 32 values in a menu, so count in 1/3rds from ++ * -4 to +4 ++ */ ++static const s64 ev_bias_qmenu[] = { ++ -4000, -3667, -3333, ++ -3000, -2667, -2333, ++ -2000, -1667, -1333, ++ -1000, -667, -333, ++ 0, 333, 667, ++ 1000, 1333, 1667, ++ 2000, 2333, 2667, ++ 3000, 3333, 3667, ++ 4000 ++}; ++ ++/* Supported ISO values (*1000) ++ * ISOO = auto ISO ++ */ ++static const s64 iso_qmenu[] = { ++ 0, 100000, 200000, 400000, 800000, ++}; ++static const uint32_t iso_values[] = { ++ 0, 100, 200, 400, 800, ++}; ++ ++static const s64 mains_freq_qmenu[] = { ++ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, ++ V4L2_CID_POWER_LINE_FREQUENCY_50HZ, ++ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ++ V4L2_CID_POWER_LINE_FREQUENCY_AUTO ++}; ++ ++/* Supported video encode modes */ ++static const s64 bitrate_mode_qmenu[] = { ++ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, ++ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, ++}; ++ ++enum bm2835_mmal_ctrl_type { ++ MMAL_CONTROL_TYPE_STD, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ MMAL_CONTROL_TYPE_INT_MENU, ++ MMAL_CONTROL_TYPE_CLUSTER, /* special cluster entry */ ++}; ++ ++struct bm2835_mmal_v4l2_ctrl; ++ ++typedef int(bm2835_mmal_v4l2_ctrl_cb)( ++ struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl); ++ ++struct bm2835_mmal_v4l2_ctrl { ++ u32 id; /* v4l2 control identifier */ ++ enum bm2835_mmal_ctrl_type type; ++ /* control minimum value or ++ * mask for MMAL_CONTROL_TYPE_STD_MENU */ ++ s32 min; ++ s32 max; /* maximum value of control */ ++ s32 def; /* default value of control */ ++ s32 step; /* step size of the control */ ++ const s64 *imenu; /* integer menu array */ ++ u32 mmal_id; /* mmal parameter id */ ++ bm2835_mmal_v4l2_ctrl_cb *setter; ++ bool ignore_errors; ++}; ++ ++struct v4l2_to_mmal_effects_setting { ++ u32 v4l2_effect; ++ u32 mmal_effect; ++ s32 col_fx_enable; ++ s32 col_fx_fixed_cbcr; ++ u32 u; ++ u32 v; ++ u32 num_effect_params; ++ u32 effect_params[MMAL_MAX_IMAGEFX_PARAMETERS]; ++}; ++ ++static const struct v4l2_to_mmal_effects_setting ++ v4l2_to_mmal_effects_values[] = { ++ { V4L2_COLORFX_NONE, MMAL_PARAM_IMAGEFX_NONE, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_BW, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 128, 128, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SEPIA, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 87, 151, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_NEGATIVE, MMAL_PARAM_IMAGEFX_NEGATIVE, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_EMBOSS, MMAL_PARAM_IMAGEFX_EMBOSS, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKETCH, MMAL_PARAM_IMAGEFX_SKETCH, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKY_BLUE, MMAL_PARAM_IMAGEFX_PASTEL, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_GRASS_GREEN, MMAL_PARAM_IMAGEFX_WATERCOLOUR, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKIN_WHITEN, MMAL_PARAM_IMAGEFX_WASHEDOUT, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_VIVID, MMAL_PARAM_IMAGEFX_SATURATION, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_AQUA, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 171, 121, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_ART_FREEZE, MMAL_PARAM_IMAGEFX_HATCH, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SILHOUETTE, MMAL_PARAM_IMAGEFX_FILM, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SOLARIZATION, MMAL_PARAM_IMAGEFX_SOLARIZE, ++ 0, 0, 0, 0, 5, {1, 128, 160, 160, 48} }, ++ { V4L2_COLORFX_ANTIQUE, MMAL_PARAM_IMAGEFX_COLOURBALANCE, ++ 0, 0, 0, 0, 3, {108, 274, 238, 0, 0} }, ++ { V4L2_COLORFX_SET_CBCR, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 1, 0, 0, 0, {0, 0, 0, 0, 0} } ++}; ++ ++struct v4l2_mmal_scene_config { ++ enum v4l2_scene_mode v4l2_scene; ++ enum mmal_parameter_exposuremode exposure_mode; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++}; ++ ++static const struct v4l2_mmal_scene_config scene_configs[] = { ++ /* V4L2_SCENE_MODE_NONE automatically added */ ++ { ++ V4L2_SCENE_MODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE ++ }, ++ { ++ V4L2_SCENE_MODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE ++ }, ++}; ++ ++/* control handlers*/ ++ ++static int ctrl_set_rational(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct mmal_parameter_rational rational_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ rational_value.num = ctrl->val; ++ rational_value.den = 100; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &rational_value, ++ sizeof(rational_value)); ++} ++ ++static int ctrl_set_value(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_iso(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ if (ctrl->val > mmal_ctrl->max || ctrl->val < mmal_ctrl->min) ++ return 1; ++ ++ if (ctrl->id == V4L2_CID_ISO_SENSITIVITY) ++ dev->iso = iso_values[ctrl->val]; ++ else if (ctrl->id == V4L2_CID_ISO_SENSITIVITY_AUTO) ++ dev->manual_iso_enabled = ++ (ctrl->val == V4L2_ISO_SENSITIVITY_MANUAL ? ++ true : ++ false); ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (dev->manual_iso_enabled) ++ u32_value = dev->iso; ++ else ++ u32_value = 0; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_ISO, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_value_ev(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ s32 s32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ s32_value = (ctrl->val-12)*2; /* Convert from index to 1/6ths */ ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &s32_value, sizeof(s32_value)); ++} ++ ++static int ctrl_set_rotate(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ u32 u32_value; ++ struct vchiq_mmal_component *camera; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ ++ u32_value = ((ctrl->val % 360) / 90) * 90; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ ++ return ret; ++} ++ ++static int ctrl_set_flip(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ u32 u32_value; ++ struct vchiq_mmal_component *camera; ++ ++ if (ctrl->id == V4L2_CID_HFLIP) ++ dev->hflip = ctrl->val; ++ else ++ dev->vflip = ctrl->val; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ ++ if (dev->hflip && dev->vflip) ++ u32_value = MMAL_PARAM_MIRROR_BOTH; ++ else if (dev->hflip) ++ u32_value = MMAL_PARAM_MIRROR_HORIZONTAL; ++ else if (dev->vflip) ++ u32_value = MMAL_PARAM_MIRROR_VERTICAL; ++ else ++ u32_value = MMAL_PARAM_MIRROR_NONE; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ ++ return ret; ++ ++} ++ ++static int ctrl_set_exposure(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ enum mmal_parameter_exposuremode exp_mode = dev->exposure_mode_user; ++ u32 shutter_speed = 0; ++ struct vchiq_mmal_port *control; ++ int ret = 0; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED) { ++ /* V4L2 is in 100usec increments. ++ * MMAL is 1usec. ++ */ ++ dev->manual_shutter_speed = ctrl->val * 100; ++ } else if (mmal_ctrl->mmal_id == MMAL_PARAMETER_EXPOSURE_MODE) { ++ switch (ctrl->val) { ++ case V4L2_EXPOSURE_AUTO: ++ exp_mode = MMAL_PARAM_EXPOSUREMODE_AUTO; ++ break; ++ ++ case V4L2_EXPOSURE_MANUAL: ++ exp_mode = MMAL_PARAM_EXPOSUREMODE_OFF; ++ break; ++ } ++ dev->exposure_mode_user = exp_mode; ++ dev->exposure_mode_v4l2_user = ctrl->val; ++ } else if (mmal_ctrl->id == V4L2_CID_EXPOSURE_AUTO_PRIORITY) { ++ dev->exp_auto_priority = ctrl->val; ++ } ++ ++ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { ++ if (exp_mode == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exp_mode, ++ sizeof(u32)); ++ dev->exposure_mode_active = exp_mode; ++ } ++ /* exposure_dynamic_framerate (V4L2_CID_EXPOSURE_AUTO_PRIORITY) should ++ * always apply irrespective of scene mode. ++ */ ++ ret += set_framerate_params(dev); ++ ++ return ret; ++} ++ ++static int ctrl_set_metering_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ switch (ctrl->val) { ++ case V4L2_EXPOSURE_METERING_AVERAGE: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE; ++ break; ++ ++ case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT; ++ break; ++ ++ case V4L2_EXPOSURE_METERING_SPOT: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT; ++ break; ++ ++ /* todo matrix weighting not added to Linux API till 3.9 ++ case V4L2_EXPOSURE_METERING_MATRIX: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX; ++ break; ++ */ ++ ++ } ++ ++ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { ++ struct vchiq_mmal_port *control; ++ u32 u32_value = dev->metering_mode; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ } else ++ return 0; ++} ++ ++static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ switch (ctrl->val) { ++ case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: ++ u32_value = MMAL_PARAM_FLICKERAVOID_OFF; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: ++ u32_value = MMAL_PARAM_FLICKERAVOID_50HZ; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: ++ u32_value = MMAL_PARAM_FLICKERAVOID_60HZ; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: ++ u32_value = MMAL_PARAM_FLICKERAVOID_AUTO; ++ break; ++ } ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_awb_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ switch (ctrl->val) { ++ case V4L2_WHITE_BALANCE_MANUAL: ++ u32_value = MMAL_PARAM_AWBMODE_OFF; ++ break; ++ ++ case V4L2_WHITE_BALANCE_AUTO: ++ u32_value = MMAL_PARAM_AWBMODE_AUTO; ++ break; ++ ++ case V4L2_WHITE_BALANCE_INCANDESCENT: ++ u32_value = MMAL_PARAM_AWBMODE_INCANDESCENT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLUORESCENT: ++ u32_value = MMAL_PARAM_AWBMODE_FLUORESCENT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLUORESCENT_H: ++ u32_value = MMAL_PARAM_AWBMODE_TUNGSTEN; ++ break; ++ ++ case V4L2_WHITE_BALANCE_HORIZON: ++ u32_value = MMAL_PARAM_AWBMODE_HORIZON; ++ break; ++ ++ case V4L2_WHITE_BALANCE_DAYLIGHT: ++ u32_value = MMAL_PARAM_AWBMODE_SUNLIGHT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLASH: ++ u32_value = MMAL_PARAM_AWBMODE_FLASH; ++ break; ++ ++ case V4L2_WHITE_BALANCE_CLOUDY: ++ u32_value = MMAL_PARAM_AWBMODE_CLOUDY; ++ break; ++ ++ case V4L2_WHITE_BALANCE_SHADE: ++ u32_value = MMAL_PARAM_AWBMODE_SHADE; ++ break; ++ ++ } ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_awb_gains(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct vchiq_mmal_port *control; ++ struct mmal_parameter_awbgains gains; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (ctrl->id == V4L2_CID_RED_BALANCE) ++ dev->red_gain = ctrl->val; ++ else if (ctrl->id == V4L2_CID_BLUE_BALANCE) ++ dev->blue_gain = ctrl->val; ++ ++ gains.r_gain.num = dev->red_gain; ++ gains.b_gain.num = dev->blue_gain; ++ gains.r_gain.den = gains.b_gain.den = 1000; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &gains, sizeof(gains)); ++} ++ ++static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = -EINVAL; ++ int i, j; ++ struct vchiq_mmal_port *control; ++ struct mmal_parameter_imagefx_parameters imagefx; ++ ++ for (i = 0; i < ARRAY_SIZE(v4l2_to_mmal_effects_values); i++) { ++ if (ctrl->val == v4l2_to_mmal_effects_values[i].v4l2_effect) { ++ ++ imagefx.effect = ++ v4l2_to_mmal_effects_values[i].mmal_effect; ++ imagefx.num_effect_params = ++ v4l2_to_mmal_effects_values[i].num_effect_params; ++ ++ if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS) ++ imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS; ++ ++ for (j = 0; j < imagefx.num_effect_params; j++) ++ imagefx.effect_parameter[j] = ++ v4l2_to_mmal_effects_values[i].effect_params[j]; ++ ++ dev->colourfx.enable = ++ v4l2_to_mmal_effects_values[i].col_fx_enable; ++ if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) { ++ dev->colourfx.u = ++ v4l2_to_mmal_effects_values[i].u; ++ dev->colourfx.v = ++ v4l2_to_mmal_effects_values[i].v; ++ } ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, control, ++ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, ++ &imagefx, sizeof(imagefx)); ++ if (ret) ++ goto exit; ++ ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, control, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &dev->colourfx, sizeof(dev->colourfx)); ++ } ++ } ++ ++exit: ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "mmal_ctrl:%p ctrl id:0x%x ctrl val:%d imagefx:0x%x color_effect:%s u:%d v:%d ret %d(%d)\n", ++ mmal_ctrl, ctrl->id, ctrl->val, imagefx.effect, ++ dev->colourfx.enable ? "true" : "false", ++ dev->colourfx.u, dev->colourfx.v, ++ ret, (ret == 0 ? 0 : -EINVAL)); ++ return (ret == 0 ? 0 : EINVAL); ++} ++ ++static int ctrl_set_colfx(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = -EINVAL; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; ++ dev->colourfx.enable = ctrl->val & 0xff; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &dev->colourfx, sizeof(dev->colourfx)); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n", ++ __func__, mmal_ctrl, ctrl->id, ctrl->val, ret, ++ (ret == 0 ? 0 : -EINVAL)); ++ return (ret == 0 ? 0 : EINVAL); ++} ++ ++static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ struct vchiq_mmal_port *encoder_out; ++ ++ dev->capture.encode_bitrate = ctrl->val; ++ ++ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out, ++ mmal_ctrl->mmal_id, ++ &ctrl->val, sizeof(ctrl->val)); ++ ret = 0; ++ return ret; ++} ++ ++static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 bitrate_mode; ++ struct vchiq_mmal_port *encoder_out; ++ ++ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ dev->capture.encode_bitrate_mode = ctrl->val; ++ switch (ctrl->val) { ++ default: ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE; ++ break; ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT; ++ break; ++ } ++ ++ vchiq_mmal_port_parameter_set(dev->instance, encoder_out, ++ mmal_ctrl->mmal_id, ++ &bitrate_mode, ++ sizeof(bitrate_mode)); ++ return 0; ++} ++ ++static int ctrl_set_image_encode_output(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *jpeg_out; ++ ++ jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, jpeg_out, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_video_encode_param_output(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *vid_enc_ctl; ++ ++ vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, vid_enc_ctl, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_video_encode_profile_level(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct mmal_parameter_video_profile param; ++ int ret = 0; ++ ++ if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_PROFILE) { ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: ++ dev->capture.enc_profile = ctrl->val; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ } else if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_LEVEL) { ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: ++ dev->capture.enc_level = ctrl->val; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ } ++ ++ if (!ret) { ++ switch (dev->capture.enc_profile) { ++ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: ++ param.profile = MMAL_VIDEO_PROFILE_H264_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: ++ param.profile = ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: ++ param.profile = MMAL_VIDEO_PROFILE_H264_MAIN; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: ++ param.profile = MMAL_VIDEO_PROFILE_H264_HIGH; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ ++ switch (dev->capture.enc_level) { ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_1; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: ++ param.level = MMAL_VIDEO_LEVEL_H264_1b; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_11; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_12; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: ++ param.level = MMAL_VIDEO_LEVEL_H264_13; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_2; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_21; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_22; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_3; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_31; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_32; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_4; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0], ++ mmal_ctrl->mmal_id, ++ ¶m, sizeof(param)); ++ } ++ return ret; ++} ++ ++static int ctrl_set_scene_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = 0; ++ int shutter_speed; ++ struct vchiq_mmal_port *control; ++ ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "scene mode selected %d, was %d\n", ctrl->val, ++ dev->scene_mode); ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (ctrl->val == dev->scene_mode) ++ return 0; ++ ++ if (ctrl->val == V4L2_SCENE_MODE_NONE) { ++ /* Restore all user selections */ ++ dev->scene_mode = V4L2_SCENE_MODE_NONE; ++ ++ if (dev->exposure_mode_user == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ else ++ shutter_speed = 0; ++ ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", ++ __func__, shutter_speed, dev->exposure_mode_user, ++ dev->metering_mode); ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &dev->exposure_mode_user, ++ sizeof(u32)); ++ dev->exposure_mode_active = dev->exposure_mode_user; ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &dev->metering_mode, ++ sizeof(u32)); ++ ret += set_framerate_params(dev); ++ } else { ++ /* Set up scene mode */ ++ int i; ++ const struct v4l2_mmal_scene_config *scene = NULL; ++ int shutter_speed; ++ enum mmal_parameter_exposuremode exposure_mode; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++ ++ for (i = 0; i < ARRAY_SIZE(scene_configs); i++) { ++ if (scene_configs[i].v4l2_scene == ++ ctrl->val) { ++ scene = &scene_configs[i]; ++ break; ++ } ++ } ++ if (!scene) ++ return -EINVAL; ++ if (i >= ARRAY_SIZE(scene_configs)) ++ return -EINVAL; ++ ++ /* Set all the values */ ++ dev->scene_mode = ctrl->val; ++ ++ if (scene->exposure_mode == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ else ++ shutter_speed = 0; ++ exposure_mode = scene->exposure_mode; ++ metering_mode = scene->metering_mode; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", ++ __func__, shutter_speed, exposure_mode, metering_mode); ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exposure_mode, ++ sizeof(u32)); ++ dev->exposure_mode_active = exposure_mode; ++ ret += vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exposure_mode, ++ sizeof(u32)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &metering_mode, ++ sizeof(u32)); ++ ret += set_framerate_params(dev); ++ } ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: Setting scene to %d, ret=%d\n", ++ __func__, ctrl->val, ret); ++ ret = -EINVAL; ++ } ++ return 0; ++} ++ ++static int bm2835_mmal_s_ctrl(struct v4l2_ctrl *ctrl) ++{ ++ struct bm2835_mmal_dev *dev = ++ container_of(ctrl->handler, struct bm2835_mmal_dev, ++ ctrl_handler); ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl = ctrl->priv; ++ int ret; ++ ++ if ((mmal_ctrl == NULL) || ++ (mmal_ctrl->id != ctrl->id) || ++ (mmal_ctrl->setter == NULL)) { ++ pr_warn("mmal_ctrl:%p ctrl id:%d\n", mmal_ctrl, ctrl->id); ++ return -EINVAL; ++ } ++ ++ ret = mmal_ctrl->setter(dev, ctrl, mmal_ctrl); ++ if (ret) ++ pr_warn("ctrl id:%d/MMAL param %08X- returned ret %d\n", ++ ctrl->id, mmal_ctrl->mmal_id, ret); ++ if (mmal_ctrl->ignore_errors) ++ ret = 0; ++ return ret; ++} ++ ++static const struct v4l2_ctrl_ops bm2835_mmal_ctrl_ops = { ++ .s_ctrl = bm2835_mmal_s_ctrl, ++}; ++ ++ ++ ++static const struct bm2835_mmal_v4l2_ctrl v4l2_ctrls[V4L2_CTRL_COUNT] = { ++ { ++ V4L2_CID_SATURATION, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_SATURATION, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_SHARPNESS, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_SHARPNESS, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_CONTRAST, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_CONTRAST, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_BRIGHTNESS, MMAL_CONTROL_TYPE_STD, ++ 0, 100, 50, 1, NULL, ++ MMAL_PARAMETER_BRIGHTNESS, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_ISO_SENSITIVITY, MMAL_CONTROL_TYPE_INT_MENU, ++ 0, ARRAY_SIZE(iso_qmenu) - 1, 0, 1, iso_qmenu, ++ MMAL_PARAMETER_ISO, ++ &ctrl_set_iso, ++ false ++ }, ++ { ++ V4L2_CID_ISO_SENSITIVITY_AUTO, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, 1, V4L2_ISO_SENSITIVITY_AUTO, 1, NULL, ++ MMAL_PARAMETER_ISO, ++ &ctrl_set_iso, ++ false ++ }, ++ { ++ V4L2_CID_IMAGE_STABILIZATION, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_VIDEO_STABILISATION, ++ &ctrl_set_value, ++ false ++ }, ++/* { ++ 0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL ++ }, */ ++ { ++ V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &ctrl_set_exposure, ++ false ++ }, ++/* todo this needs mixing in with set exposure ++ { ++ V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, ++ }, ++ */ ++ { ++ V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD, ++ /* Units of 100usecs */ ++ 1, 1*1000*10, 100*10, 1, NULL, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &ctrl_set_exposure, ++ false ++ }, ++ { ++ V4L2_CID_AUTO_EXPOSURE_BIAS, MMAL_CONTROL_TYPE_INT_MENU, ++ 0, ARRAY_SIZE(ev_bias_qmenu) - 1, ++ (ARRAY_SIZE(ev_bias_qmenu)+1)/2 - 1, 0, ev_bias_qmenu, ++ MMAL_PARAMETER_EXPOSURE_COMP, ++ &ctrl_set_value_ev, ++ false ++ }, ++ { ++ V4L2_CID_EXPOSURE_AUTO_PRIORITY, MMAL_CONTROL_TYPE_STD, ++ 0, 1, ++ 0, 1, NULL, ++ 0, /* Dummy MMAL ID as it gets mapped into FPS range*/ ++ &ctrl_set_exposure, ++ false ++ }, ++ { ++ V4L2_CID_EXPOSURE_METERING, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &ctrl_set_metering_mode, ++ false ++ }, ++ { ++ V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x3ff, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL, ++ MMAL_PARAMETER_AWB_MODE, ++ &ctrl_set_awb_mode, ++ false ++ }, ++ { ++ V4L2_CID_RED_BALANCE, MMAL_CONTROL_TYPE_STD, ++ 1, 7999, 1000, 1, NULL, ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, ++ &ctrl_set_awb_gains, ++ false ++ }, ++ { ++ V4L2_CID_BLUE_BALANCE, MMAL_CONTROL_TYPE_STD, ++ 1, 7999, 1000, 1, NULL, ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, ++ &ctrl_set_awb_gains, ++ false ++ }, ++ { ++ V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, 15, V4L2_COLORFX_NONE, 0, NULL, ++ MMAL_PARAMETER_IMAGE_EFFECT, ++ &ctrl_set_image_effect, ++ false ++ }, ++ { ++ V4L2_CID_COLORFX_CBCR, MMAL_CONTROL_TYPE_STD, ++ 0, 0xffff, 0x8080, 1, NULL, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &ctrl_set_colfx, ++ false ++ }, ++ { ++ V4L2_CID_ROTATE, MMAL_CONTROL_TYPE_STD, ++ 0, 360, 0, 90, NULL, ++ MMAL_PARAMETER_ROTATION, ++ &ctrl_set_rotate, ++ false ++ }, ++ { ++ V4L2_CID_HFLIP, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_MIRROR, ++ &ctrl_set_flip, ++ false ++ }, ++ { ++ V4L2_CID_VFLIP, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_MIRROR, ++ &ctrl_set_flip, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, ARRAY_SIZE(bitrate_mode_qmenu) - 1, ++ 0, 0, bitrate_mode_qmenu, ++ MMAL_PARAMETER_RATECONTROL, ++ &ctrl_set_bitrate_mode, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_BITRATE, MMAL_CONTROL_TYPE_STD, ++ 25*1000, 25*1000*1000, 10*1000*1000, 25*1000, NULL, ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ &ctrl_set_bitrate, ++ false ++ }, ++ { ++ V4L2_CID_JPEG_COMPRESSION_QUALITY, MMAL_CONTROL_TYPE_STD, ++ 1, 100, ++ 30, 1, NULL, ++ MMAL_PARAMETER_JPEG_Q_FACTOR, ++ &ctrl_set_image_encode_output, ++ false ++ }, ++ { ++ V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, ARRAY_SIZE(mains_freq_qmenu) - 1, ++ 1, 1, NULL, ++ MMAL_PARAMETER_FLICKER_AVOID, ++ &ctrl_set_flicker_avoidance, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, MMAL_CONTROL_TYPE_STD, ++ 0, 1, ++ 0, 1, NULL, ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, ++ &ctrl_set_video_encode_param_output, ++ true /* Errors ignored as requires latest firmware to work */ ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_H264_PROFILE, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~((1<ctrls[c]) && (v4l2_ctrls[c].setter)) { ++ ret = v4l2_ctrls[c].setter(dev, dev->ctrls[c], ++ &v4l2_ctrls[c]); ++ if (!v4l2_ctrls[c].ignore_errors && ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Failed when setting default values for ctrl %d\n", ++ c); ++ break; ++ } ++ } ++ } ++ return ret; ++} ++ ++int set_framerate_params(struct bm2835_mmal_dev *dev) ++{ ++ struct mmal_parameter_fps_range fps_range; ++ int ret; ++ ++ if ((dev->exposure_mode_active != MMAL_PARAM_EXPOSUREMODE_OFF) && ++ (dev->exp_auto_priority)) { ++ /* Variable FPS. Define min FPS as 1fps. ++ * Max as max defined FPS. ++ */ ++ fps_range.fps_low.num = 1; ++ fps_range.fps_low.den = 1; ++ fps_range.fps_high.num = dev->capture.timeperframe.denominator; ++ fps_range.fps_high.den = dev->capture.timeperframe.numerator; ++ } else { ++ /* Fixed FPS - set min and max to be the same */ ++ fps_range.fps_low.num = fps_range.fps_high.num = ++ dev->capture.timeperframe.denominator; ++ fps_range.fps_low.den = fps_range.fps_high.den = ++ dev->capture.timeperframe.numerator; ++ } ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Set fps range to %d/%d to %d/%d\n", ++ fps_range.fps_low.num, ++ fps_range.fps_low.den, ++ fps_range.fps_high.num, ++ fps_range.fps_high.den ++ ); ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ if (ret) ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Failed to set fps ret %d\n", ++ ret); ++ ++ return ret; ++ ++} ++ ++int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl_handler *hdl) ++{ ++ int c; ++ const struct bm2835_mmal_v4l2_ctrl *ctrl; ++ ++ v4l2_ctrl_handler_init(hdl, V4L2_CTRL_COUNT); ++ ++ for (c = 0; c < V4L2_CTRL_COUNT; c++) { ++ ctrl = &v4l2_ctrls[c]; ++ ++ switch (ctrl->type) { ++ case MMAL_CONTROL_TYPE_STD: ++ dev->ctrls[c] = v4l2_ctrl_new_std(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->min, ctrl->max, ctrl->step, ctrl->def); ++ break; ++ ++ case MMAL_CONTROL_TYPE_STD_MENU: ++ { ++ int mask = ctrl->min; ++ ++ if (ctrl->id == V4L2_CID_SCENE_MODE) { ++ /* Special handling to work out the mask ++ * value based on the scene_configs array ++ * at runtime. Reduces the chance of ++ * mismatches. ++ */ ++ int i; ++ mask = 1<ctrls[c] = v4l2_ctrl_new_std_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->max, mask, ctrl->def); ++ break; ++ } ++ ++ case MMAL_CONTROL_TYPE_INT_MENU: ++ dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->max, ctrl->def, ctrl->imenu); ++ break; ++ ++ case MMAL_CONTROL_TYPE_CLUSTER: ++ /* skip this entry when constructing controls */ ++ continue; ++ } ++ ++ if (hdl->error) ++ break; ++ ++ dev->ctrls[c]->priv = (void *)ctrl; ++ } ++ ++ if (hdl->error) { ++ pr_err("error adding control %d/%d id 0x%x\n", c, ++ V4L2_CTRL_COUNT, ctrl->id); ++ return hdl->error; ++ } ++ ++ for (c = 0; c < V4L2_CTRL_COUNT; c++) { ++ ctrl = &v4l2_ctrls[c]; ++ ++ switch (ctrl->type) { ++ case MMAL_CONTROL_TYPE_CLUSTER: ++ v4l2_ctrl_auto_cluster(ctrl->min, ++ &dev->ctrls[c+1], ++ ctrl->max, ++ ctrl->def); ++ break; ++ ++ case MMAL_CONTROL_TYPE_STD: ++ case MMAL_CONTROL_TYPE_STD_MENU: ++ case MMAL_CONTROL_TYPE_INT_MENU: ++ break; ++ } ++ ++ } ++ ++ return 0; ++} +diff --git a/drivers/media/platform/bcm2835/mmal-common.h b/drivers/media/platform/bcm2835/mmal-common.h +new file mode 100644 +index 000000000000..840fd139e033 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-common.h +@@ -0,0 +1,53 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * MMAL structures ++ * ++ */ ++ ++#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) ++#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') ++ ++/** Special value signalling that time is not known */ ++#define MMAL_TIME_UNKNOWN (1LL<<63) ++ ++/* mapping between v4l and mmal video modes */ ++struct mmal_fmt { ++ char *name; ++ u32 fourcc; /* v4l2 format id */ ++ int flags; /* v4l2 flags field */ ++ u32 mmal; ++ int depth; ++ u32 mmal_component; /* MMAL component index to be used to encode */ ++ u32 ybbp; /* depth of first Y plane for planar formats */ ++}; ++ ++/* buffer for one video frame */ ++struct mmal_buffer { ++ /* v4l buffer data -- must be first */ ++ struct vb2_v4l2_buffer vb; ++ ++ /* list of buffers available */ ++ struct list_head list; ++ ++ void *buffer; /* buffer pointer */ ++ unsigned long buffer_size; /* size of allocated buffer */ ++}; ++ ++/* */ ++struct mmal_colourfx { ++ s32 enable; ++ u32 u; ++ u32 v; ++}; +diff --git a/drivers/media/platform/bcm2835/mmal-encodings.h b/drivers/media/platform/bcm2835/mmal-encodings.h +new file mode 100644 +index 000000000000..024d620dc1df +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-encodings.h +@@ -0,0 +1,127 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++#ifndef MMAL_ENCODINGS_H ++#define MMAL_ENCODINGS_H ++ ++#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') ++#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') ++#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') ++#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') ++#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') ++#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') ++#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') ++#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') ++#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') ++#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') ++#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') ++#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') ++#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') ++#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') ++#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') ++ ++#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') ++#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') ++#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') ++#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') ++#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') ++#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') ++ ++#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') ++#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') ++#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') ++#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') ++#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') ++#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') ++#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') ++#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') ++#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') ++#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') ++#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') ++#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') ++#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') ++#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') ++#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') ++#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') ++#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') ++#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') ++#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') ++#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') ++#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') ++ ++/** SAND Video (YUVUV128) format, native format understood by VideoCore. ++ * This format is *not* opaque - if requested you will receive full frames ++ * of YUV_UV video. ++ */ ++#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') ++ ++/** VideoCore opaque image format, image handles are returned to ++ * the host but not the actual image data. ++ */ ++#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') ++ ++/** An EGL image handle ++ */ ++#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') ++ ++/* }@ */ ++ ++/** \name Pre-defined audio encodings */ ++/* @{ */ ++#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') ++#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') ++#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') ++#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') ++#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') ++#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') ++ ++/* Pre-defined H264 encoding variants */ ++ ++/** ISO 14496-10 Annex B byte stream format */ ++#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 ++/** ISO 14496-15 AVC stream format */ ++#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') ++/** Implicitly delineated NAL units without emulation prevention */ ++#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') ++ ++ ++/** \defgroup MmalColorSpace List of pre-defined video color spaces ++ * This defines a list of common color spaces. This list isn't exhaustive and ++ * is only provided as a convenience to avoid clients having to use FourCC ++ * codes directly. However components are allowed to define and use their own ++ * FourCC codes. ++ */ ++/* @{ */ ++ ++/** Unknown color space */ ++#define MMAL_COLOR_SPACE_UNKNOWN 0 ++/** ITU-R BT.601-5 [SDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') ++/** ITU-R BT.709-3 [HDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') ++/** JPEG JFIF */ ++#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') ++/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') ++/** Society of Motion Picture and Television Engineers 240M (1999) */ ++#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') ++/** ITU-R BT.470-2 System M */ ++#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') ++/** ITU-R BT.470-2 System BG */ ++#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') ++/** JPEG JFIF, but with 16..255 luma */ ++#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') ++/* @} MmalColorSpace List */ ++ ++#endif /* MMAL_ENCODINGS_H */ +diff --git a/drivers/media/platform/bcm2835/mmal-msg-common.h b/drivers/media/platform/bcm2835/mmal-msg-common.h +new file mode 100644 +index 000000000000..66e8a6edf628 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-common.h +@@ -0,0 +1,50 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#ifndef MMAL_MSG_COMMON_H ++#define MMAL_MSG_COMMON_H ++ ++enum mmal_msg_status { ++ MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ ++ MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ ++ MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ ++ MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ ++ MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ ++ MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ ++ MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ ++ MMAL_MSG_STATUS_EIO, /**< I/O error */ ++ MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ ++ MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ ++ MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ ++ MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ ++ MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ ++ MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ ++ MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ ++ MMAL_MSG_STATUS_EFAULT, /**< Bad address */ ++}; ++ ++struct mmal_rect { ++ s32 x; /**< x coordinate (from left) */ ++ s32 y; /**< y coordinate (from top) */ ++ s32 width; /**< width */ ++ s32 height; /**< height */ ++}; ++ ++struct mmal_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++#endif /* MMAL_MSG_COMMON_H */ +diff --git a/drivers/media/platform/bcm2835/mmal-msg-format.h b/drivers/media/platform/bcm2835/mmal-msg-format.h +new file mode 100644 +index 000000000000..123d86ef582b +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-format.h +@@ -0,0 +1,81 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#ifndef MMAL_MSG_FORMAT_H ++#define MMAL_MSG_FORMAT_H ++ ++#include "mmal-msg-common.h" ++ ++/* MMAL_ES_FORMAT_T */ ++ ++ ++struct mmal_audio_format { ++ u32 channels; /**< Number of audio channels */ ++ u32 sample_rate; /**< Sample rate */ ++ ++ u32 bits_per_sample; /**< Bits per sample */ ++ u32 block_align; /**< Size of a block of data */ ++}; ++ ++struct mmal_video_format { ++ u32 width; /**< Width of frame in pixels */ ++ u32 height; /**< Height of frame in rows of pixels */ ++ struct mmal_rect crop; /**< Visible region of the frame */ ++ struct mmal_rational frame_rate; /**< Frame rate */ ++ struct mmal_rational par; /**< Pixel aspect ratio */ ++ ++ /* FourCC specifying the color space of the video stream. See the ++ * \ref MmalColorSpace "pre-defined color spaces" for some examples. ++ */ ++ u32 color_space; ++}; ++ ++struct mmal_subpicture_format { ++ u32 x_offset; ++ u32 y_offset; ++}; ++ ++union mmal_es_specific_format { ++ struct mmal_audio_format audio; ++ struct mmal_video_format video; ++ struct mmal_subpicture_format subpicture; ++}; ++ ++/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++struct mmal_es_format { ++ u32 type; /* enum mmal_es_type */ ++ ++ u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ ++ ++ union mmal_es_specific_format *es; /* TODO: pointers in ++ * message serialisation?!? ++ */ ++ /* Type specific ++ * information for the ++ * elementary stream ++ */ ++ ++ u32 bitrate; /**< Bitrate in bits per second */ ++ u32 flags; /**< Flags describing properties of the elementary stream. */ ++ ++ u32 extradata_size; /**< Size of the codec specific data */ ++ u8 *extradata; /**< Codec specific data */ ++}; ++ ++#endif /* MMAL_MSG_FORMAT_H */ +diff --git a/drivers/media/platform/bcm2835/mmal-msg-port.h b/drivers/media/platform/bcm2835/mmal-msg-port.h +new file mode 100644 +index 000000000000..a55c1ea2eceb +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-port.h +@@ -0,0 +1,107 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* MMAL_PORT_TYPE_T */ ++enum mmal_port_type { ++ MMAL_PORT_TYPE_UNKNOWN = 0, /**< Unknown port type */ ++ MMAL_PORT_TYPE_CONTROL, /**< Control port */ ++ MMAL_PORT_TYPE_INPUT, /**< Input port */ ++ MMAL_PORT_TYPE_OUTPUT, /**< Output port */ ++ MMAL_PORT_TYPE_CLOCK, /**< Clock port */ ++}; ++ ++/** The port is pass-through and doesn't need buffer headers allocated */ ++#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 ++/** The port wants to allocate the buffer payloads. ++ * This signals a preference that payload allocation should be done ++ * on this port for efficiency reasons. */ ++#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 ++/** The port supports format change events. ++ * This applies to input ports and is used to let the client know ++ * whether the port supports being reconfigured via a format ++ * change event (i.e. without having to disable the port). */ ++#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 ++ ++/* mmal port structure (MMAL_PORT_T) ++ * ++ * most elements are informational only, the pointer values for ++ * interogation messages are generally provided as additional ++ * strucures within the message. When used to set values only teh ++ * buffer_num, buffer_size and userdata parameters are writable. ++ */ ++struct mmal_port { ++ void *priv; /* Private member used by the framework */ ++ const char *name; /* Port name. Used for debugging purposes (RO) */ ++ ++ u32 type; /* Type of the port (RO) enum mmal_port_type */ ++ u16 index; /* Index of the port in its type list (RO) */ ++ u16 index_all; /* Index of the port in the list of all ports (RO) */ ++ ++ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ ++ struct mmal_es_format *format; /* Format of the elementary stream */ ++ ++ u32 buffer_num_min; /* Minimum number of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_size_min; /* Minimum size of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_alignment_min; /* Minimum alignment requirement for ++ * the buffers (RO). A value of ++ * zero means no special alignment ++ * requirements. This is set by the ++ * component. ++ */ ++ ++ u32 buffer_num_recommended; /* Number of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_size_recommended; /* Size of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_num; /* Actual number of buffers the port will use. ++ * This is set by the client. ++ */ ++ ++ u32 buffer_size; /* Actual maximum size of the buffers that ++ * will be sent to the port. This is set by ++ * the client. ++ */ ++ ++ void *component; /* Component this port belongs to (Read Only) */ ++ ++ void *userdata; /* Field reserved for use by the client */ ++ ++ u32 capabilities; /* Flags describing the capabilities of a ++ * port (RO). Bitwise combination of \ref ++ * portcapabilities "Port capabilities" ++ * values. ++ */ ++ ++}; +diff --git a/drivers/media/platform/bcm2835/mmal-msg.h b/drivers/media/platform/bcm2835/mmal-msg.h +new file mode 100644 +index 000000000000..67b1076015a5 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg.h +@@ -0,0 +1,404 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* all the data structures which serialise the MMAL protocol. note ++ * these are directly mapped onto the recived message data. ++ * ++ * BEWARE: They seem to *assume* pointers are u32 and that there is no ++ * structure padding! ++ * ++ * NOTE: this implementation uses kernel types to ensure sizes. Rather ++ * than assigning values to enums to force their size the ++ * implementation uses fixed size types and not the enums (though the ++ * comments have the actual enum type ++ */ ++ ++#define VC_MMAL_VER 15 ++#define VC_MMAL_MIN_VER 10 ++#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") ++ ++/* max total message size is 512 bytes */ ++#define MMAL_MSG_MAX_SIZE 512 ++/* with six 32bit header elements max payload is therefore 488 bytes */ ++#define MMAL_MSG_MAX_PAYLOAD 488 ++ ++#include "mmal-msg-common.h" ++#include "mmal-msg-format.h" ++#include "mmal-msg-port.h" ++ ++enum mmal_msg_type { ++ MMAL_MSG_TYPE_QUIT = 1, ++ MMAL_MSG_TYPE_SERVICE_CLOSED, ++ MMAL_MSG_TYPE_GET_VERSION, ++ MMAL_MSG_TYPE_COMPONENT_CREATE, ++ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ ++ MMAL_MSG_TYPE_COMPONENT_ENABLE, ++ MMAL_MSG_TYPE_COMPONENT_DISABLE, ++ MMAL_MSG_TYPE_PORT_INFO_GET, ++ MMAL_MSG_TYPE_PORT_INFO_SET, ++ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST, ++ MMAL_MSG_TYPE_BUFFER_TO_HOST, ++ MMAL_MSG_TYPE_GET_STATS, ++ MMAL_MSG_TYPE_PORT_PARAMETER_SET, ++ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ ++ MMAL_MSG_TYPE_EVENT_TO_HOST, ++ MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, ++ MMAL_MSG_TYPE_CONSUME_MEM, ++ MMAL_MSG_TYPE_LMK, /* 20 */ ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, ++ MMAL_MSG_TYPE_DRM_GET_LHS32, ++ MMAL_MSG_TYPE_DRM_GET_TIME, ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, ++ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ ++ MMAL_MSG_TYPE_HOST_LOG, ++ MMAL_MSG_TYPE_MSG_LAST ++}; ++ ++/* port action request messages differ depending on the action type */ ++enum mmal_msg_port_action_type { ++ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unkown action */ ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ ++}; ++ ++struct mmal_msg_header { ++ u32 magic; ++ u32 type; /** enum mmal_msg_type */ ++ ++ /* Opaque handle to the control service */ ++ struct mmal_control_service *control_service; ++ ++ struct mmal_msg_context *context; /** a u32 per message context */ ++ u32 status; /** The status of the vchiq operation */ ++ u32 padding; ++}; ++ ++/* Send from VC to host to report version */ ++struct mmal_msg_version { ++ u32 flags; ++ u32 major; ++ u32 minor; ++ u32 minimum; ++}; ++ ++/* request to VC to create component */ ++struct mmal_msg_component_create { ++ void *client_component; /* component context */ ++ char name[128]; ++ u32 pid; /* For debug */ ++}; ++ ++/* reply from VC to component creation request */ ++struct mmal_msg_component_create_reply { ++ u32 status; /** enum mmal_msg_status - how does this differ to ++ * the one in the header? ++ */ ++ u32 component_handle; /* VideoCore handle for component */ ++ u32 input_num; /* Number of input ports */ ++ u32 output_num; /* Number of output ports */ ++ u32 clock_num; /* Number of clock ports */ ++}; ++ ++/* request to VC to destroy a component */ ++struct mmal_msg_component_destroy { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_destroy_reply { ++ u32 status; /** The component destruction status */ ++}; ++ ++ ++/* request and reply to VC to enable a component */ ++struct mmal_msg_component_enable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_enable_reply { ++ u32 status; /** The component enable status */ ++}; ++ ++ ++/* request and reply to VC to disable a component */ ++struct mmal_msg_component_disable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_disable_reply { ++ u32 status; /** The component disable status */ ++}; ++ ++/* request to VC to get port information */ ++struct mmal_msg_port_info_get { ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port index to query */ ++}; ++ ++/* reply from VC to get port info request */ ++struct mmal_msg_port_info_get_reply { ++ u32 status; /** enum mmal_msg_status */ ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /**< Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; /* elementry stream format */ ++ union mmal_es_specific_format es; /* es type specific data */ ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ ++}; ++ ++/* request to VC to set port information */ ++struct mmal_msg_port_info_set { ++ u32 component_handle; ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++/* reply from VC to port info set request */ ++struct mmal_msg_port_info_set_reply { ++ u32 status; ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /**< Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++ ++/* port action requests that take a mmal_port as a parameter */ ++struct mmal_msg_port_action_port { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ struct mmal_port port; ++}; ++ ++/* port action requests that take handles as a parameter */ ++struct mmal_msg_port_action_handle { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ u32 connect_component_handle; ++ u32 connect_port_handle; ++}; ++ ++struct mmal_msg_port_action_reply { ++ u32 status; /** The port action operation status */ ++}; ++ ++ ++ ++ ++/* MMAL buffer transfer */ ++ ++/** Size of space reserved in a buffer message for short messages. */ ++#define MMAL_VC_SHORT_DATA 128 ++ ++/** Signals that the current payload is the end of the stream of data */ ++#define MMAL_BUFFER_HEADER_FLAG_EOS (1<<0) ++/** Signals that the start of the current payload starts a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_START (1<<1) ++/** Signals that the end of the current payload ends a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_END (1<<2) ++/** Signals that the current payload contains only complete frames (>1) */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME \ ++ (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) ++/** Signals that the current payload is a keyframe (i.e. self decodable) */ ++#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME (1<<3) ++/** Signals a discontinuity in the stream of data (e.g. after a seek). ++ * Can be used for instance by a decoder to reset its state */ ++#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY (1<<4) ++/** Signals a buffer containing some kind of config data for the component ++ * (e.g. codec config data) */ ++#define MMAL_BUFFER_HEADER_FLAG_CONFIG (1<<5) ++/** Signals an encrypted payload */ ++#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED (1<<6) ++/** Signals a buffer containing side information */ ++#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO (1<<7) ++/** Signals a buffer which is the snapshot/postview image from a stills ++ * capture ++ */ ++#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT (1<<8) ++/** Signals a buffer which contains data known to be corrupted */ ++#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED (1<<9) ++/** Signals that a buffer failed to be transmitted */ ++#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED (1<<10) ++ ++struct mmal_driver_buffer { ++ u32 magic; ++ u32 component_handle; ++ u32 port_handle; ++ void *client_context; ++}; ++ ++/* buffer header */ ++struct mmal_buffer_header { ++ struct mmal_buffer_header *next; /* next header */ ++ void *priv; /* framework private data */ ++ u32 cmd; ++ void *data; ++ u32 alloc_size; ++ u32 length; ++ u32 offset; ++ u32 flags; ++ s64 pts; ++ s64 dts; ++ void *type; ++ void *user_data; ++}; ++ ++struct mmal_buffer_header_type_specific { ++ union { ++ struct { ++ u32 planes; ++ u32 offset[4]; ++ u32 pitch[4]; ++ u32 flags; ++ } video; ++ } u; ++}; ++ ++struct mmal_msg_buffer_from_host { ++ /* The front 32 bytes of the buffer header are copied ++ * back to us in the reply to allow for context. This ++ * area is used to store two mmal_driver_buffer structures to ++ * allow for multiple concurrent service users. ++ */ ++ /* control data */ ++ struct mmal_driver_buffer drvbuf; ++ ++ /* referenced control data for passthrough buffer management */ ++ struct mmal_driver_buffer drvbuf_ref; ++ struct mmal_buffer_header buffer_header; /* buffer header itself */ ++ struct mmal_buffer_header_type_specific buffer_header_type_specific; ++ s32 is_zero_copy; ++ s32 has_reference; ++ ++ /** allows short data to be xfered in control message */ ++ u32 payload_in_message; ++ u8 short_data[MMAL_VC_SHORT_DATA]; ++}; ++ ++ ++/* port parameter setting */ ++ ++#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 ++ ++struct mmal_msg_port_parameter_set { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++struct mmal_msg_port_parameter_set_reply { ++ u32 status; /** enum mmal_msg_status todo: how does this ++ * differ to the one in the header? ++ */ ++}; ++ ++/* port parameter getting */ ++ ++struct mmal_msg_port_parameter_get { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++}; ++ ++struct mmal_msg_port_parameter_get_reply { ++ u32 status; /* Status of mmal_port_parameter_get call */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++/* event messages */ ++#define MMAL_WORKER_EVENT_SPACE 256 ++ ++struct mmal_msg_event_to_host { ++ void *client_component; /* component context */ ++ ++ u32 port_type; ++ u32 port_num; ++ ++ u32 cmd; ++ u32 length; ++ u8 data[MMAL_WORKER_EVENT_SPACE]; ++ struct mmal_buffer_header *delayed_buffer; ++}; ++ ++/* all mmal messages are serialised through this structure */ ++struct mmal_msg { ++ /* header */ ++ struct mmal_msg_header h; ++ /* payload */ ++ union { ++ struct mmal_msg_version version; ++ ++ struct mmal_msg_component_create component_create; ++ struct mmal_msg_component_create_reply component_create_reply; ++ ++ struct mmal_msg_component_destroy component_destroy; ++ struct mmal_msg_component_destroy_reply component_destroy_reply; ++ ++ struct mmal_msg_component_enable component_enable; ++ struct mmal_msg_component_enable_reply component_enable_reply; ++ ++ struct mmal_msg_component_disable component_disable; ++ struct mmal_msg_component_disable_reply component_disable_reply; ++ ++ struct mmal_msg_port_info_get port_info_get; ++ struct mmal_msg_port_info_get_reply port_info_get_reply; ++ ++ struct mmal_msg_port_info_set port_info_set; ++ struct mmal_msg_port_info_set_reply port_info_set_reply; ++ ++ struct mmal_msg_port_action_port port_action_port; ++ struct mmal_msg_port_action_handle port_action_handle; ++ struct mmal_msg_port_action_reply port_action_reply; ++ ++ struct mmal_msg_buffer_from_host buffer_from_host; ++ ++ struct mmal_msg_port_parameter_set port_parameter_set; ++ struct mmal_msg_port_parameter_set_reply ++ port_parameter_set_reply; ++ struct mmal_msg_port_parameter_get ++ port_parameter_get; ++ struct mmal_msg_port_parameter_get_reply ++ port_parameter_get_reply; ++ ++ struct mmal_msg_event_to_host event_to_host; ++ ++ u8 payload[MMAL_MSG_MAX_PAYLOAD]; ++ } u; ++}; +diff --git a/drivers/media/platform/bcm2835/mmal-parameters.h b/drivers/media/platform/bcm2835/mmal-parameters.h +new file mode 100644 +index 000000000000..f6abb5cfa49d +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-parameters.h +@@ -0,0 +1,689 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* common parameters */ ++ ++/** @name Parameter groups ++ * Parameters are divided into groups, and then allocated sequentially within ++ * a group using an enum. ++ * @{ ++ */ ++ ++/** Common parameter ID group, used with many types of component. */ ++#define MMAL_PARAMETER_GROUP_COMMON (0<<16) ++/** Camera-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CAMERA (1<<16) ++/** Video-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_VIDEO (2<<16) ++/** Audio-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_AUDIO (3<<16) ++/** Clock-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CLOCK (4<<16) ++/** Miracast-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_MIRACAST (5<<16) ++ ++/* Common parameters */ ++enum mmal_parameter_common_type { ++ MMAL_PARAMETER_UNUSED /**< Never a valid parameter ID */ ++ = MMAL_PARAMETER_GROUP_COMMON, ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */ ++ MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */ ++ ++ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ ++ MMAL_PARAMETER_CHANGE_EVENT_REQUEST, ++ ++ /** MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ZERO_COPY, ++ ++ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ ++ MMAL_PARAMETER_BUFFER_REQUIREMENTS, ++ ++ MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */ ++ MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */ ++ MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */ ++ MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */ ++ MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */ ++ MMAL_PARAMETER_SYSTEM_TIME, /**< MMAL_PARAMETER_UINT64_T */ ++ MMAL_PARAMETER_NO_IMAGE_PADDING /**< MMAL_PARAMETER_BOOLEAN_T */ ++}; ++ ++/* camera parameters */ ++ ++enum mmal_parameter_camera_type { ++ /* 0 */ ++ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ ++ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION ++ = MMAL_PARAMETER_GROUP_CAMERA, ++ MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */ ++ MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */ ++ MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */ ++ MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */ ++ MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ ++ MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */ ++ MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */ ++ MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */ ++ MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */ ++ MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ ++ MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */ ++ ++ /* 0x10 */ ++ MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ ++ MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ ++ MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ ++ MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ ++ MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ ++ MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ ++ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ ++ MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ ++ MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ ++ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ ++ /* 0x20 */ ++ MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ ++ MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ ++ MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ ++ MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ ++ MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ ++ MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ ++ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */ ++ MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ ++ MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ ++ /* 0x30 */ ++ MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ ++ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAMERA_BURST_CAPTURE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_MIN_ISO, ++ ++ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ ++ MMAL_PARAMETER_CAMERA_USE_CASE, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE_STATS_PASS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_REGISTER_FILE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, ++ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ ++ MMAL_PARAMETER_CONFIGFILE_REGISTERS, ++ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ ++ MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, ++ MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ ++ MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ ++ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ ++ ++ /* 0x40 */ ++ MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SHUTTER_SPEED, /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ ++}; ++ ++struct mmal_parameter_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++enum mmal_parameter_camera_config_timestamp_mode { ++ MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ ++ MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value ++ * for the frame timestamp ++ */ ++ MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp ++ * but subtract the ++ * timestamp of the first ++ * frame sent to give a ++ * zero based timestamp. ++ */ ++}; ++ ++struct mmal_parameter_fps_range { ++ /**< Low end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_low; ++ /**< High end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_high; ++}; ++ ++ ++/* camera configuration parameter */ ++struct mmal_parameter_camera_config { ++ /* Parameters for setting up the image pools */ ++ u32 max_stills_w; /* Max size of stills capture */ ++ u32 max_stills_h; ++ u32 stills_yuv422; /* Allow YUV422 stills capture */ ++ u32 one_shot_stills; /* Continuous or one shot stills captures. */ ++ ++ u32 max_preview_video_w; /* Max size of the preview or video ++ * capture frames ++ */ ++ u32 max_preview_video_h; ++ u32 num_preview_video_frames; ++ ++ /** Sets the height of the circular buffer for stills capture. */ ++ u32 stills_capture_circular_buffer_height; ++ ++ /** Allows preview/encode to resume as fast as possible after the stills ++ * input frame has been received, and then processes the still frame in ++ * the background whilst preview/encode has resumed. ++ * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. ++ */ ++ u32 fast_preview_resume; ++ ++ /** Selects algorithm for timestamping frames if ++ * there is no clock component connected. ++ * enum mmal_parameter_camera_config_timestamp_mode ++ */ ++ s32 use_stc_timestamp; ++}; ++ ++ ++enum mmal_parameter_exposuremode { ++ MMAL_PARAM_EXPOSUREMODE_OFF, ++ MMAL_PARAM_EXPOSUREMODE_AUTO, ++ MMAL_PARAM_EXPOSUREMODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, ++ MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMODE_SNOW, ++ MMAL_PARAM_EXPOSUREMODE_BEACH, ++ MMAL_PARAM_EXPOSUREMODE_VERYLONG, ++ MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, ++ MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, ++ MMAL_PARAM_EXPOSUREMODE_FIREWORKS, ++}; ++ ++enum mmal_parameter_exposuremeteringmode { ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, ++}; ++ ++enum mmal_parameter_awbmode { ++ MMAL_PARAM_AWBMODE_OFF, ++ MMAL_PARAM_AWBMODE_AUTO, ++ MMAL_PARAM_AWBMODE_SUNLIGHT, ++ MMAL_PARAM_AWBMODE_CLOUDY, ++ MMAL_PARAM_AWBMODE_SHADE, ++ MMAL_PARAM_AWBMODE_TUNGSTEN, ++ MMAL_PARAM_AWBMODE_FLUORESCENT, ++ MMAL_PARAM_AWBMODE_INCANDESCENT, ++ MMAL_PARAM_AWBMODE_FLASH, ++ MMAL_PARAM_AWBMODE_HORIZON, ++}; ++ ++enum mmal_parameter_imagefx { ++ MMAL_PARAM_IMAGEFX_NONE, ++ MMAL_PARAM_IMAGEFX_NEGATIVE, ++ MMAL_PARAM_IMAGEFX_SOLARIZE, ++ MMAL_PARAM_IMAGEFX_POSTERIZE, ++ MMAL_PARAM_IMAGEFX_WHITEBOARD, ++ MMAL_PARAM_IMAGEFX_BLACKBOARD, ++ MMAL_PARAM_IMAGEFX_SKETCH, ++ MMAL_PARAM_IMAGEFX_DENOISE, ++ MMAL_PARAM_IMAGEFX_EMBOSS, ++ MMAL_PARAM_IMAGEFX_OILPAINT, ++ MMAL_PARAM_IMAGEFX_HATCH, ++ MMAL_PARAM_IMAGEFX_GPEN, ++ MMAL_PARAM_IMAGEFX_PASTEL, ++ MMAL_PARAM_IMAGEFX_WATERCOLOUR, ++ MMAL_PARAM_IMAGEFX_FILM, ++ MMAL_PARAM_IMAGEFX_BLUR, ++ MMAL_PARAM_IMAGEFX_SATURATION, ++ MMAL_PARAM_IMAGEFX_COLOURSWAP, ++ MMAL_PARAM_IMAGEFX_WASHEDOUT, ++ MMAL_PARAM_IMAGEFX_POSTERISE, ++ MMAL_PARAM_IMAGEFX_COLOURPOINT, ++ MMAL_PARAM_IMAGEFX_COLOURBALANCE, ++ MMAL_PARAM_IMAGEFX_CARTOON, ++}; ++ ++enum MMAL_PARAM_FLICKERAVOID_T { ++ MMAL_PARAM_FLICKERAVOID_OFF, ++ MMAL_PARAM_FLICKERAVOID_AUTO, ++ MMAL_PARAM_FLICKERAVOID_50HZ, ++ MMAL_PARAM_FLICKERAVOID_60HZ, ++ MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_awbgains { ++ struct mmal_parameter_rational r_gain; /**< Red gain */ ++ struct mmal_parameter_rational b_gain; /**< Blue gain */ ++}; ++ ++/** Manner of video rate control */ ++enum mmal_parameter_rate_control_mode { ++ MMAL_VIDEO_RATECONTROL_DEFAULT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE, ++ MMAL_VIDEO_RATECONTROL_CONSTANT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, ++ MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES ++}; ++ ++enum mmal_video_profile { ++ MMAL_VIDEO_PROFILE_H263_BASELINE, ++ MMAL_VIDEO_PROFILE_H263_H320CODING, ++ MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, ++ MMAL_VIDEO_PROFILE_H263_ISWV2, ++ MMAL_VIDEO_PROFILE_H263_ISWV3, ++ MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, ++ MMAL_VIDEO_PROFILE_H263_INTERNET, ++ MMAL_VIDEO_PROFILE_H263_INTERLACE, ++ MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_CORE, ++ MMAL_VIDEO_PROFILE_MP4V_MAIN, ++ MMAL_VIDEO_PROFILE_MP4V_NBIT, ++ MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, ++ MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, ++ MMAL_VIDEO_PROFILE_MP4V_HYBRID, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, ++ MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, ++ MMAL_VIDEO_PROFILE_H264_BASELINE, ++ MMAL_VIDEO_PROFILE_H264_MAIN, ++ MMAL_VIDEO_PROFILE_H264_EXTENDED, ++ MMAL_VIDEO_PROFILE_H264_HIGH, ++ MMAL_VIDEO_PROFILE_H264_HIGH10, ++ MMAL_VIDEO_PROFILE_H264_HIGH422, ++ MMAL_VIDEO_PROFILE_H264_HIGH444, ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, ++ MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF ++}; ++ ++enum mmal_video_level { ++ MMAL_VIDEO_LEVEL_H263_10, ++ MMAL_VIDEO_LEVEL_H263_20, ++ MMAL_VIDEO_LEVEL_H263_30, ++ MMAL_VIDEO_LEVEL_H263_40, ++ MMAL_VIDEO_LEVEL_H263_45, ++ MMAL_VIDEO_LEVEL_H263_50, ++ MMAL_VIDEO_LEVEL_H263_60, ++ MMAL_VIDEO_LEVEL_H263_70, ++ MMAL_VIDEO_LEVEL_MP4V_0, ++ MMAL_VIDEO_LEVEL_MP4V_0b, ++ MMAL_VIDEO_LEVEL_MP4V_1, ++ MMAL_VIDEO_LEVEL_MP4V_2, ++ MMAL_VIDEO_LEVEL_MP4V_3, ++ MMAL_VIDEO_LEVEL_MP4V_4, ++ MMAL_VIDEO_LEVEL_MP4V_4a, ++ MMAL_VIDEO_LEVEL_MP4V_5, ++ MMAL_VIDEO_LEVEL_MP4V_6, ++ MMAL_VIDEO_LEVEL_H264_1, ++ MMAL_VIDEO_LEVEL_H264_1b, ++ MMAL_VIDEO_LEVEL_H264_11, ++ MMAL_VIDEO_LEVEL_H264_12, ++ MMAL_VIDEO_LEVEL_H264_13, ++ MMAL_VIDEO_LEVEL_H264_2, ++ MMAL_VIDEO_LEVEL_H264_21, ++ MMAL_VIDEO_LEVEL_H264_22, ++ MMAL_VIDEO_LEVEL_H264_3, ++ MMAL_VIDEO_LEVEL_H264_31, ++ MMAL_VIDEO_LEVEL_H264_32, ++ MMAL_VIDEO_LEVEL_H264_4, ++ MMAL_VIDEO_LEVEL_H264_41, ++ MMAL_VIDEO_LEVEL_H264_42, ++ MMAL_VIDEO_LEVEL_H264_5, ++ MMAL_VIDEO_LEVEL_H264_51, ++ MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_video_profile { ++ enum mmal_video_profile profile; ++ enum mmal_video_level level; ++}; ++ ++/* video parameters */ ++ ++enum mmal_parameter_video_type { ++ /** @ref MMAL_DISPLAYREGION_T */ ++ MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_SUPPORTED_PROFILES, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_PROFILE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_INTRAPERIOD, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ ++ MMAL_PARAMETER_RATECONTROL, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ ++ MMAL_PARAMETER_NALUNITFORMAT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Setting the value to zero resets to the default (one slice per frame). ++ */ ++ MMAL_PARAMETER_MB_ROWS_PER_SLICE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ ++ MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_ENABLE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ ++ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, ++ /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ ++ MMAL_PARAMETER_VIDEO_INTRA_REFRESH, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ ++ /** @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_VIDEO_FRAME_RATE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, ++ ++ MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_VERT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_QP_P, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, ++ ++ /* H264 specific parameters */ ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, ++ ++ /** @ref MMAL_PARAMETER_BYTES_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER ++}; ++ ++/** Valid mirror modes */ ++enum mmal_parameter_mirror { ++ MMAL_PARAM_MIRROR_NONE, ++ MMAL_PARAM_MIRROR_VERTICAL, ++ MMAL_PARAM_MIRROR_HORIZONTAL, ++ MMAL_PARAM_MIRROR_BOTH, ++}; ++ ++enum mmal_parameter_displaytransform { ++ MMAL_DISPLAY_ROT0 = 0, ++ MMAL_DISPLAY_MIRROR_ROT0 = 1, ++ MMAL_DISPLAY_MIRROR_ROT180 = 2, ++ MMAL_DISPLAY_ROT180 = 3, ++ MMAL_DISPLAY_MIRROR_ROT90 = 4, ++ MMAL_DISPLAY_ROT270 = 5, ++ MMAL_DISPLAY_ROT90 = 6, ++ MMAL_DISPLAY_MIRROR_ROT270 = 7, ++}; ++ ++enum mmal_parameter_displaymode { ++ MMAL_DISPLAY_MODE_FILL = 0, ++ MMAL_DISPLAY_MODE_LETTERBOX = 1, ++}; ++ ++enum mmal_parameter_displayset { ++ MMAL_DISPLAY_SET_NONE = 0, ++ MMAL_DISPLAY_SET_NUM = 1, ++ MMAL_DISPLAY_SET_FULLSCREEN = 2, ++ MMAL_DISPLAY_SET_TRANSFORM = 4, ++ MMAL_DISPLAY_SET_DEST_RECT = 8, ++ MMAL_DISPLAY_SET_SRC_RECT = 0x10, ++ MMAL_DISPLAY_SET_MODE = 0x20, ++ MMAL_DISPLAY_SET_PIXEL = 0x40, ++ MMAL_DISPLAY_SET_NOASPECT = 0x80, ++ MMAL_DISPLAY_SET_LAYER = 0x100, ++ MMAL_DISPLAY_SET_COPYPROTECT = 0x200, ++ MMAL_DISPLAY_SET_ALPHA = 0x400, ++}; ++ ++struct mmal_parameter_displayregion { ++ /** Bitfield that indicates which fields are set and should be ++ * used. All other fields will maintain their current value. ++ * \ref MMAL_DISPLAYSET_T defines the bits that can be ++ * combined. ++ */ ++ u32 set; ++ ++ /** Describes the display output device, with 0 typically ++ * being a directly connected LCD display. The actual values ++ * will depend on the hardware. Code using hard-wired numbers ++ * (e.g. 2) is certain to fail. ++ */ ++ ++ u32 display_num; ++ /** Indicates that we are using the full device screen area, ++ * rather than a window of the display. If zero, then ++ * dest_rect is used to specify a region of the display to ++ * use. ++ */ ++ ++ s32 fullscreen; ++ /** Indicates any rotation or flipping used to map frames onto ++ * the natural display orientation. ++ */ ++ u32 transform; /* enum mmal_parameter_displaytransform */ ++ ++ /** Where to display the frame within the screen, if ++ * fullscreen is zero. ++ */ ++ struct vchiq_mmal_rect dest_rect; ++ ++ /** Indicates which area of the frame to display. If all ++ * values are zero, the whole frame will be used. ++ */ ++ struct vchiq_mmal_rect src_rect; ++ ++ /** If set to non-zero, indicates that any display scaling ++ * should disregard the aspect ratio of the frame region being ++ * displayed. ++ */ ++ s32 noaspect; ++ ++ /** Indicates how the image should be scaled to fit the ++ * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates ++ * that the image should fill the screen by potentially ++ * cropping the frames. Setting \code mode \endcode to \code ++ * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the ++ * source region should be displayed and black bars added if ++ * necessary. ++ */ ++ u32 mode; /* enum mmal_parameter_displaymode */ ++ ++ /** If non-zero, defines the width of a source pixel relative ++ * to \code pixel_y \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_x; ++ ++ /** If non-zero, defines the height of a source pixel relative ++ * to \code pixel_x \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_y; ++ ++ /** Sets the relative depth of the images, with greater values ++ * being in front of smaller values. ++ */ ++ u32 layer; ++ ++ /** Set to non-zero to ensure copy protection is used on ++ * output. ++ */ ++ s32 copyprotect_required; ++ ++ /** Level of opacity of the layer, where zero is fully ++ * transparent and 255 is fully opaque. ++ */ ++ u32 alpha; ++}; ++ ++#define MMAL_MAX_IMAGEFX_PARAMETERS 5 ++ ++struct mmal_parameter_imagefx_parameters { ++ enum mmal_parameter_imagefx effect; ++ u32 num_effect_params; ++ u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; ++}; ++ ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 ++ ++struct mmal_parameter_camera_info_camera_t { ++ u32 port_id; ++ u32 max_width; ++ u32 max_height; ++ u32 lens_present; ++ u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; ++}; ++ ++enum mmal_parameter_camera_info_flash_type_t { ++ /* Make values explicit to ensure they match values in config ini */ ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_camera_info_flash_t { ++ enum mmal_parameter_camera_info_flash_type_t flash_type; ++}; ++ ++struct mmal_parameter_camera_info_t { ++ u32 num_cameras; ++ u32 num_flashes; ++ struct mmal_parameter_camera_info_camera_t ++ cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; ++ struct mmal_parameter_camera_info_flash_t ++ flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; ++}; +diff --git a/drivers/media/platform/bcm2835/mmal-vchiq.c b/drivers/media/platform/bcm2835/mmal-vchiq.c +new file mode 100644 +index 000000000000..781322542d5a +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-vchiq.c +@@ -0,0 +1,1916 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * V4L2 driver MMAL vchiq interface code ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-vchiq.h" ++#include "mmal-msg.h" ++ ++#define USE_VCHIQ_ARM ++#include "interface/vchi/vchi.h" ++ ++/* maximum number of components supported */ ++#define VCHIQ_MMAL_MAX_COMPONENTS 4 ++ ++/*#define FULL_MSG_DUMP 1*/ ++ ++#ifdef DEBUG ++static const char *const msg_type_names[] = { ++ "UNKNOWN", ++ "QUIT", ++ "SERVICE_CLOSED", ++ "GET_VERSION", ++ "COMPONENT_CREATE", ++ "COMPONENT_DESTROY", ++ "COMPONENT_ENABLE", ++ "COMPONENT_DISABLE", ++ "PORT_INFO_GET", ++ "PORT_INFO_SET", ++ "PORT_ACTION", ++ "BUFFER_FROM_HOST", ++ "BUFFER_TO_HOST", ++ "GET_STATS", ++ "PORT_PARAMETER_SET", ++ "PORT_PARAMETER_GET", ++ "EVENT_TO_HOST", ++ "GET_CORE_STATS_FOR_PORT", ++ "OPAQUE_ALLOCATOR", ++ "CONSUME_MEM", ++ "LMK", ++ "OPAQUE_ALLOCATOR_DESC", ++ "DRM_GET_LHS32", ++ "DRM_GET_TIME", ++ "BUFFER_FROM_HOST_ZEROLEN", ++ "PORT_FLUSH", ++ "HOST_LOG", ++}; ++#endif ++ ++static const char *const port_action_type_names[] = { ++ "UNKNOWN", ++ "ENABLE", ++ "DISABLE", ++ "FLUSH", ++ "CONNECT", ++ "DISCONNECT", ++ "SET_REQUIREMENTS", ++}; ++ ++#if defined(DEBUG) ++#if defined(FULL_MSG_DUMP) ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ ++ do { \ ++ pr_debug(TITLE" type:%s(%d) length:%d\n", \ ++ msg_type_names[(MSG)->h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ print_hex_dump(KERN_DEBUG, "<h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ } ++#endif ++#else ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) ++#endif ++ ++/* normal message context */ ++struct mmal_msg_context { ++ union { ++ struct { ++ /* work struct for defered callback - must come first */ ++ struct work_struct work; ++ /* mmal instance */ ++ struct vchiq_mmal_instance *instance; ++ /* mmal port */ ++ struct vchiq_mmal_port *port; ++ /* actual buffer used to store bulk reply */ ++ struct mmal_buffer *buffer; ++ /* amount of buffer used */ ++ unsigned long buffer_used; ++ /* MMAL buffer flags */ ++ u32 mmal_flags; ++ /* Presentation and Decode timestamps */ ++ s64 pts; ++ s64 dts; ++ ++ int status; /* context status */ ++ ++ } bulk; /* bulk data */ ++ ++ struct { ++ /* message handle to release */ ++ VCHI_HELD_MSG_T msg_handle; ++ /* pointer to received message */ ++ struct mmal_msg *msg; ++ /* received message length */ ++ u32 msg_len; ++ /* completion upon reply */ ++ struct completion cmplt; ++ } sync; /* synchronous response */ ++ } u; ++ ++}; ++ ++struct vchiq_mmal_instance { ++ VCHI_SERVICE_HANDLE_T handle; ++ ++ /* ensure serialised access to service */ ++ struct mutex vchiq_mutex; ++ ++ /* ensure serialised access to bulk operations */ ++ struct mutex bulk_mutex; ++ ++ /* vmalloc page to receive scratch bulk xfers into */ ++ void *bulk_scratch; ++ ++ /* component to use next */ ++ int component_idx; ++ struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; ++}; ++ ++static struct mmal_msg_context *get_msg_context(struct vchiq_mmal_instance ++ *instance) ++{ ++ struct mmal_msg_context *msg_context; ++ ++ /* todo: should this be allocated from a pool to avoid kmalloc */ ++ msg_context = kmalloc(sizeof(*msg_context), GFP_KERNEL); ++ memset(msg_context, 0, sizeof(*msg_context)); ++ ++ return msg_context; ++} ++ ++static void release_msg_context(struct mmal_msg_context *msg_context) ++{ ++ kfree(msg_context); ++} ++ ++/* deals with receipt of event to host message */ ++static void event_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ pr_debug("unhandled event\n"); ++ pr_debug("component:%p port type:%d num:%d cmd:0x%x length:%d\n", ++ msg->u.event_to_host.client_component, ++ msg->u.event_to_host.port_type, ++ msg->u.event_to_host.port_num, ++ msg->u.event_to_host.cmd, msg->u.event_to_host.length); ++} ++ ++/* workqueue scheduled callback ++ * ++ * we do this because it is important we do not call any other vchiq ++ * sync calls from witin the message delivery thread ++ */ ++static void buffer_work_cb(struct work_struct *work) ++{ ++ struct mmal_msg_context *msg_context = (struct mmal_msg_context *)work; ++ ++ msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port, ++ msg_context->u.bulk.status, ++ msg_context->u.bulk.buffer, ++ msg_context->u.bulk.buffer_used, ++ msg_context->u.bulk.mmal_flags, ++ msg_context->u.bulk.dts, ++ msg_context->u.bulk.pts); ++ ++ /* release message context */ ++ release_msg_context(msg_context); ++} ++ ++/* enqueue a bulk receive for a given message context */ ++static int bulk_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ unsigned long rd_len; ++ unsigned long flags = 0; ++ int ret; ++ ++ /* bulk mutex stops other bulk operations while we have a ++ * receive in progress - released in callback ++ */ ++ ret = mutex_lock_interruptible(&instance->bulk_mutex); ++ if (ret != 0) ++ return ret; ++ ++ rd_len = msg->u.buffer_from_host.buffer_header.length; ++ ++ /* take buffer from queue */ ++ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); ++ if (list_empty(&msg_context->u.bulk.port->buffers)) { ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ pr_err("buffer list empty trying to submit bulk receive\n"); ++ ++ /* todo: this is a serious error, we should never have ++ * commited a buffer_to_host operation to the mmal ++ * port without the buffer to back it up (underflow ++ * handling) and there is no obvious way to deal with ++ * this - how is the mmal servie going to react when ++ * we fail to do the xfer and reschedule a buffer when ++ * it arrives? perhaps a starved flag to indicate a ++ * waiting bulk receive? ++ */ ++ ++ mutex_unlock(&instance->bulk_mutex); ++ ++ return -EINVAL; ++ } ++ ++ msg_context->u.bulk.buffer = ++ list_entry(msg_context->u.bulk.port->buffers.next, ++ struct mmal_buffer, list); ++ list_del(&msg_context->u.bulk.buffer->list); ++ ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ ++ /* ensure we do not overrun the available buffer */ ++ if (rd_len > msg_context->u.bulk.buffer->buffer_size) { ++ rd_len = msg_context->u.bulk.buffer->buffer_size; ++ pr_warn("short read as not enough receive buffer space\n"); ++ /* todo: is this the correct response, what happens to ++ * the rest of the message data? ++ */ ++ } ++ ++ /* store length */ ++ msg_context->u.bulk.buffer_used = rd_len; ++ msg_context->u.bulk.mmal_flags = ++ msg->u.buffer_from_host.buffer_header.flags; ++ msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; ++ msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; ++ ++ // only need to flush L1 cache here, as VCHIQ takes care of the L2 ++ // cache. ++ __cpuc_flush_dcache_area(msg_context->u.bulk.buffer->buffer, rd_len); ++ ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ret = vchi_bulk_queue_receive(instance->handle, ++ msg_context->u.bulk.buffer->buffer, ++ /* Actual receive needs to be a multiple ++ * of 4 bytes ++ */ ++ (rd_len + 3) & ~3, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) { ++ /* callback will not be clearing the mutex */ ++ mutex_unlock(&instance->bulk_mutex); ++ } ++ ++ return ret; ++} ++ ++/* enque a dummy bulk receive for a given message context */ ++static int dummy_bulk_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ int ret; ++ ++ /* bulk mutex stops other bulk operations while we have a ++ * receive in progress - released in callback ++ */ ++ ret = mutex_lock_interruptible(&instance->bulk_mutex); ++ if (ret != 0) ++ return ret; ++ ++ /* zero length indicates this was a dummy transfer */ ++ msg_context->u.bulk.buffer_used = 0; ++ ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_bulk_queue_receive(instance->handle, ++ instance->bulk_scratch, ++ 8, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) { ++ /* callback will not be clearing the mutex */ ++ mutex_unlock(&instance->bulk_mutex); ++ } ++ ++ return ret; ++} ++ ++/* data in message, memcpy from packet into output buffer */ ++static int inline_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ unsigned long flags = 0; ++ ++ /* take buffer from queue */ ++ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); ++ if (list_empty(&msg_context->u.bulk.port->buffers)) { ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ pr_err("buffer list empty trying to receive inline\n"); ++ ++ /* todo: this is a serious error, we should never have ++ * commited a buffer_to_host operation to the mmal ++ * port without the buffer to back it up (with ++ * underflow handling) and there is no obvious way to ++ * deal with this. Less bad than the bulk case as we ++ * can just drop this on the floor but...unhelpful ++ */ ++ return -EINVAL; ++ } ++ ++ msg_context->u.bulk.buffer = ++ list_entry(msg_context->u.bulk.port->buffers.next, ++ struct mmal_buffer, list); ++ list_del(&msg_context->u.bulk.buffer->list); ++ ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ ++ memcpy(msg_context->u.bulk.buffer->buffer, ++ msg->u.buffer_from_host.short_data, ++ msg->u.buffer_from_host.payload_in_message); ++ ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ ++ return 0; ++} ++ ++/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ ++static int ++buffer_from_host(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context; ++ struct mmal_msg m; ++ int ret; ++ ++ pr_debug("instance:%p buffer:%p\n", instance->handle, buf); ++ ++ /* bulk mutex stops other bulk operations while we ++ * have a receive in progress ++ */ ++ if (mutex_lock_interruptible(&instance->bulk_mutex)) ++ return -EINTR; ++ ++ /* get context */ ++ msg_context = get_msg_context(instance); ++ if (msg_context == NULL) ++ return -ENOMEM; ++ ++ /* store bulk message context for when data arrives */ ++ msg_context->u.bulk.instance = instance; ++ msg_context->u.bulk.port = port; ++ msg_context->u.bulk.buffer = NULL; /* not valid until bulk xfer */ ++ msg_context->u.bulk.buffer_used = 0; ++ ++ /* initialise work structure ready to schedule callback */ ++ INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); ++ ++ /* prep the buffer from host message */ ++ memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ ++ ++ m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; ++ m.h.magic = MMAL_MAGIC; ++ m.h.context = msg_context; ++ m.h.status = 0; ++ ++ /* drvbuf is our private data passed back */ ++ m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; ++ m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; ++ m.u.buffer_from_host.drvbuf.port_handle = port->handle; ++ m.u.buffer_from_host.drvbuf.client_context = msg_context; ++ ++ /* buffer header */ ++ m.u.buffer_from_host.buffer_header.cmd = 0; ++ m.u.buffer_from_host.buffer_header.data = buf->buffer; ++ m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; ++ m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ ++ m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ ++ m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ ++ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; ++ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; ++ ++ /* clear buffer type sepecific data */ ++ memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, ++ sizeof(m.u.buffer_from_host.buffer_header_type_specific)); ++ ++ /* no payload in message */ ++ m.u.buffer_from_host.payload_in_message = 0; ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_msg_queue(instance->handle, &m, ++ sizeof(struct mmal_msg_header) + ++ sizeof(m.u.buffer_from_host), ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (ret != 0) { ++ release_msg_context(msg_context); ++ /* todo: is this correct error value? */ ++ } ++ ++ vchi_service_release(instance->handle); ++ ++ mutex_unlock(&instance->bulk_mutex); ++ ++ return ret; ++} ++ ++/* submit a buffer to the mmal sevice ++ * ++ * the buffer_from_host uses size data from the ports next available ++ * mmal_buffer and deals with there being no buffer available by ++ * incrementing the underflow for later ++ */ ++static int port_buffer_from_host(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_buffer *buf; ++ unsigned long flags = 0; ++ ++ if (!port->enabled) ++ return -EINVAL; ++ ++ /* peek buffer from queue */ ++ spin_lock_irqsave(&port->slock, flags); ++ if (list_empty(&port->buffers)) { ++ port->buffer_underflow++; ++ spin_unlock_irqrestore(&port->slock, flags); ++ return -ENOSPC; ++ } ++ ++ buf = list_entry(port->buffers.next, struct mmal_buffer, list); ++ ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ /* issue buffer to mmal service */ ++ ret = buffer_from_host(instance, port, buf); ++ if (ret) { ++ pr_err("adding buffer header failed\n"); ++ /* todo: how should this be dealt with */ ++ } ++ ++ return ret; ++} ++ ++/* deals with receipt of buffer to host message */ ++static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ struct mmal_msg_context *msg_context; ++ ++ pr_debug("buffer_to_host_cb: instance:%p msg:%p msg_len:%d\n", ++ instance, msg, msg_len); ++ ++ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { ++ msg_context = msg->u.buffer_from_host.drvbuf.client_context; ++ } else { ++ pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); ++ return; ++ } ++ ++ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { ++ /* message reception had an error */ ++ pr_warn("error %d in reply\n", msg->h.status); ++ ++ msg_context->u.bulk.status = msg->h.status; ++ ++ } else if (msg->u.buffer_from_host.buffer_header.length == 0) { ++ /* empty buffer */ ++ if (msg->u.buffer_from_host.buffer_header.flags & ++ MMAL_BUFFER_HEADER_FLAG_EOS) { ++ msg_context->u.bulk.status = ++ dummy_bulk_receive(instance, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ } else { ++ /* do callback with empty buffer - not EOS though */ ++ msg_context->u.bulk.status = 0; ++ msg_context->u.bulk.buffer_used = 0; ++ } ++ } else if (msg->u.buffer_from_host.payload_in_message == 0) { ++ /* data is not in message, queue a bulk receive */ ++ msg_context->u.bulk.status = ++ bulk_receive(instance, msg, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ ++ /* failed to submit buffer, this will end badly */ ++ pr_err("error %d on bulk submission\n", ++ msg_context->u.bulk.status); ++ ++ } else if (msg->u.buffer_from_host.payload_in_message <= ++ MMAL_VC_SHORT_DATA) { ++ /* data payload within message */ ++ msg_context->u.bulk.status = inline_receive(instance, msg, ++ msg_context); ++ } else { ++ pr_err("message with invalid short payload\n"); ++ ++ /* signal error */ ++ msg_context->u.bulk.status = -EINVAL; ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ } ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(instance, msg_context->u.bulk.port); ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_receive_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ /* bulk receive operation complete */ ++ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port); ++ ++ msg_context->u.bulk.status = 0; ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_abort_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); ++ ++ /* bulk receive operation complete */ ++ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port); ++ ++ msg_context->u.bulk.status = -EINTR; ++ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++/* incoming event service callback */ ++static void service_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *bulk_ctx) ++{ ++ struct vchiq_mmal_instance *instance = param; ++ int status; ++ u32 msg_len; ++ struct mmal_msg *msg; ++ VCHI_HELD_MSG_T msg_handle; ++ ++ if (!instance) { ++ pr_err("Message callback passed NULL instance\n"); ++ return; ++ } ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ status = vchi_msg_hold(instance->handle, (void **)&msg, ++ &msg_len, VCHI_FLAGS_NONE, &msg_handle); ++ if (status) { ++ pr_err("Unable to dequeue a message (%d)\n", status); ++ break; ++ } ++ ++ DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); ++ ++ /* handling is different for buffer messages */ ++ switch (msg->h.type) { ++ ++ case MMAL_MSG_TYPE_BUFFER_FROM_HOST: ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ case MMAL_MSG_TYPE_EVENT_TO_HOST: ++ event_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ ++ break; ++ ++ case MMAL_MSG_TYPE_BUFFER_TO_HOST: ++ buffer_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ default: ++ /* messages dependant on header context to complete */ ++ ++ /* todo: the msg.context really ought to be sanity ++ * checked before we just use it, afaict it comes back ++ * and is used raw from the videocore. Perhaps it ++ * should be verified the address lies in the kernel ++ * address space. ++ */ ++ if (msg->h.context == NULL) { ++ pr_err("received message context was null!\n"); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ } ++ ++ /* fill in context values */ ++ msg->h.context->u.sync.msg_handle = msg_handle; ++ msg->h.context->u.sync.msg = msg; ++ msg->h.context->u.sync.msg_len = msg_len; ++ ++ /* todo: should this check (completion_done() ++ * == 1) for no one waiting? or do we need a ++ * flag to tell us the completion has been ++ * interrupted so we can free the message and ++ * its context. This probably also solves the ++ * message arriving after interruption todo ++ * below ++ */ ++ ++ /* complete message so caller knows it happened */ ++ complete(&msg->h.context->u.sync.cmplt); ++ break; ++ } ++ ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVED: ++ bulk_receive_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: ++ bulk_abort_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ /* TODO: consider if this requires action if received when ++ * driver is not explicitly closing the service ++ */ ++ break; ++ ++ default: ++ pr_err("Received unhandled message reason %d\n", reason); ++ break; ++ } ++} ++ ++static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ unsigned int payload_len, ++ struct mmal_msg **msg_out, ++ VCHI_HELD_MSG_T *msg_handle_out) ++{ ++ struct mmal_msg_context msg_context; ++ int ret; ++ ++ /* payload size must not cause message to exceed max size */ ++ if (payload_len > ++ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { ++ pr_err("payload length %d exceeds max:%d\n", payload_len, ++ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))); ++ return -EINVAL; ++ } ++ ++ init_completion(&msg_context.u.sync.cmplt); ++ ++ msg->h.magic = MMAL_MAGIC; ++ msg->h.context = &msg_context; ++ msg->h.status = 0; ++ ++ DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), ++ ">>> sync message"); ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_msg_queue(instance->handle, ++ msg, ++ sizeof(struct mmal_msg_header) + payload_len, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret) { ++ pr_err("error %d queuing message\n", ret); ++ return ret; ++ } ++ ++ ret = wait_for_completion_timeout(&msg_context.u.sync.cmplt, 3*HZ); ++ if (ret <= 0) { ++ pr_err("error %d waiting for sync completion\n", ret); ++ if (ret == 0) ++ ret = -ETIME; ++ /* todo: what happens if the message arrives after aborting */ ++ return ret; ++ } ++ ++ *msg_out = msg_context.u.sync.msg; ++ *msg_handle_out = msg_context.u.sync.msg_handle; ++ ++ return 0; ++} ++ ++static void dump_port_info(struct vchiq_mmal_port *port) ++{ ++ pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); ++ ++ pr_debug("buffer minimum num:%d size:%d align:%d\n", ++ port->minimum_buffer.num, ++ port->minimum_buffer.size, port->minimum_buffer.alignment); ++ ++ pr_debug("buffer recommended num:%d size:%d align:%d\n", ++ port->recommended_buffer.num, ++ port->recommended_buffer.size, ++ port->recommended_buffer.alignment); ++ ++ pr_debug("buffer current values num:%d size:%d align:%d\n", ++ port->current_buffer.num, ++ port->current_buffer.size, port->current_buffer.alignment); ++ ++ pr_debug("elementry stream: type:%d encoding:0x%x varient:0x%x\n", ++ port->format.type, ++ port->format.encoding, port->format.encoding_variant); ++ ++ pr_debug(" bitrate:%d flags:0x%x\n", ++ port->format.bitrate, port->format.flags); ++ ++ if (port->format.type == MMAL_ES_TYPE_VIDEO) { ++ pr_debug ++ ("es video format: width:%d height:%d colourspace:0x%x\n", ++ port->es.video.width, port->es.video.height, ++ port->es.video.color_space); ++ ++ pr_debug(" : crop xywh %d,%d,%d,%d\n", ++ port->es.video.crop.x, ++ port->es.video.crop.y, ++ port->es.video.crop.width, port->es.video.crop.height); ++ pr_debug(" : framerate %d/%d aspect %d/%d\n", ++ port->es.video.frame_rate.num, ++ port->es.video.frame_rate.den, ++ port->es.video.par.num, port->es.video.par.den); ++ } ++} ++ ++static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) ++{ ++ ++ /* todo do readonly fields need setting at all? */ ++ p->type = port->type; ++ p->index = port->index; ++ p->index_all = 0; ++ p->is_enabled = port->enabled; ++ p->buffer_num_min = port->minimum_buffer.num; ++ p->buffer_size_min = port->minimum_buffer.size; ++ p->buffer_alignment_min = port->minimum_buffer.alignment; ++ p->buffer_num_recommended = port->recommended_buffer.num; ++ p->buffer_size_recommended = port->recommended_buffer.size; ++ ++ /* only three writable fields in a port */ ++ p->buffer_num = port->current_buffer.num; ++ p->buffer_size = port->current_buffer.size; ++ p->userdata = port; ++} ++ ++static int port_info_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ pr_debug("setting port info port %p\n", port); ++ if (!port) ++ return -1; ++ dump_port_info(port); ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; ++ ++ m.u.port_info_set.component_handle = port->component->handle; ++ m.u.port_info_set.port_type = port->type; ++ m.u.port_info_set.port_index = port->index; ++ ++ port_to_mmal_msg(port, &m.u.port_info_set.port); ++ ++ /* elementry stream format setup */ ++ m.u.port_info_set.format.type = port->format.type; ++ m.u.port_info_set.format.encoding = port->format.encoding; ++ m.u.port_info_set.format.encoding_variant = ++ port->format.encoding_variant; ++ m.u.port_info_set.format.bitrate = port->format.bitrate; ++ m.u.port_info_set.format.flags = port->format.flags; ++ ++ memcpy(&m.u.port_info_set.es, &port->es, ++ sizeof(union mmal_es_specific_format)); ++ ++ m.u.port_info_set.format.extradata_size = port->format.extradata_size; ++ memcpy(&m.u.port_info_set.extradata, port->format.extradata, ++ port->format.extradata_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_set), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, ++ port->component->handle, port->handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++ ++} ++ ++/* use port info get message to retrive port information */ ++static int port_info_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* port info time */ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; ++ m.u.port_info_get.component_handle = port->component->handle; ++ m.u.port_info_get.port_type = port->type; ++ m.u.port_info_get.index = port->index; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ if (rmsg->u.port_info_get_reply.port.is_enabled == 0) ++ port->enabled = false; ++ else ++ port->enabled = true; ++ ++ /* copy the values out of the message */ ++ port->handle = rmsg->u.port_info_get_reply.port_handle; ++ ++ /* port type and index cached to use on port info set becuase ++ * it does not use a port handle ++ */ ++ port->type = rmsg->u.port_info_get_reply.port_type; ++ port->index = rmsg->u.port_info_get_reply.port_index; ++ ++ port->minimum_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_min; ++ port->minimum_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size_min; ++ port->minimum_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ ++ port->recommended_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ port->recommended_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_recommended; ++ ++ port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; ++ port->current_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size; ++ ++ /* stream format */ ++ port->format.type = rmsg->u.port_info_get_reply.format.type; ++ port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; ++ port->format.encoding_variant = ++ rmsg->u.port_info_get_reply.format.encoding_variant; ++ port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; ++ port->format.flags = rmsg->u.port_info_get_reply.format.flags; ++ ++ /* elementry stream format */ ++ memcpy(&port->es, ++ &rmsg->u.port_info_get_reply.es, ++ sizeof(union mmal_es_specific_format)); ++ port->format.es = &port->es; ++ ++ port->format.extradata_size = ++ rmsg->u.port_info_get_reply.format.extradata_size; ++ memcpy(port->format.extradata, ++ rmsg->u.port_info_get_reply.extradata, ++ port->format.extradata_size); ++ ++ pr_debug("received port info\n"); ++ dump_port_info(port); ++ ++release_msg: ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", ++ __func__, ret, port->component->handle, port->handle); ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* create comonent on vc */ ++static int create_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component, ++ const char *name) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* build component create message */ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; ++ m.u.component_create.client_component = component; ++ strncpy(m.u.component_create.name, name, ++ sizeof(m.u.component_create.name)); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_create), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_create_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ /* a valid component response received */ ++ component->handle = rmsg->u.component_create_reply.component_handle; ++ component->inputs = rmsg->u.component_create_reply.input_num; ++ component->outputs = rmsg->u.component_create_reply.output_num; ++ component->clocks = rmsg->u.component_create_reply.clock_num; ++ ++ pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", ++ component->handle, ++ component->inputs, component->outputs, component->clocks); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* destroys a component on vc */ ++static int destroy_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; ++ m.u.component_destroy.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_destroy), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_destroy_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* enable a component on vc */ ++static int enable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; ++ m.u.component_enable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_enable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_enable_reply.status; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disable a component on vc */ ++static int disable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; ++ m.u.component_disable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_disable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_disable_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* get version of mmal implementation */ ++static int get_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_GET_VERSION; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.version), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ *major_out = rmsg->u.version.major; ++ *minor_out = rmsg->u.version.minor; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with a port as a parameter */ ++static int port_action_port(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ m.u.port_action_port.component_handle = port->component->handle; ++ m.u.port_action_port.port_handle = port->handle; ++ m.u.port_action_port.action = action_type; ++ ++ port_to_mmal_msg(port, &m.u.port_action_port.port); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_port), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], action_type); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with handles as parameters */ ++static int port_action_handle(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type, ++ u32 connect_component_handle, ++ u32 connect_port_handle) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ ++ m.u.port_action_handle.component_handle = port->component->handle; ++ m.u.port_action_handle.port_handle = port->handle; ++ m.u.port_action_handle.action = action_type; ++ ++ m.u.port_action_handle.connect_component_handle = ++ connect_component_handle; ++ m.u.port_action_handle.connect_port_handle = connect_port_handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_handle), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)" \ ++ " connect component:0x%x connect port:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], ++ action_type, connect_component_handle, connect_port_handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; ++ ++ m.u.port_parameter_set.component_handle = port->component->handle; ++ m.u.port_parameter_set.port_handle = port->handle; ++ m.u.port_parameter_set.id = parameter_id; ++ m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; ++ memcpy(&m.u.port_parameter_set.value, value, value_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ (4 * sizeof(u32)) + value_size, ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_set_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 *value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; ++ ++ m.u.port_parameter_get.component_handle = port->component->handle; ++ m.u.port_parameter_get.port_handle = port->handle; ++ m.u.port_parameter_get.id = parameter_id; ++ m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(struct ++ mmal_msg_port_parameter_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { ++ /* got an unexpected message type in reply */ ++ pr_err("Incorrect reply type %d\n", rmsg->h.type); ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_get_reply.status; ++ if (ret) { ++ /* Copy only as much as we have space for ++ * but report true size of parameter ++ */ ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ *value_size); ++ *value_size = rmsg->u.port_parameter_get_reply.size; ++ } else ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ rmsg->u.port_parameter_get_reply.size); ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disables a port and drains buffers from it */ ++static int port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct list_head *q, *buf_head; ++ unsigned long flags = 0; ++ ++ if (!port->enabled) ++ return 0; ++ ++ port->enabled = false; ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE); ++ if (ret == 0) { ++ ++ /* drain all queued buffers on port */ ++ spin_lock_irqsave(&port->slock, flags); ++ ++ list_for_each_safe(buf_head, q, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ list_del(buf_head); ++ if (port->buffer_cb) ++ port->buffer_cb(instance, ++ port, 0, mmalbuf, 0, 0, ++ MMAL_TIME_UNKNOWN, ++ MMAL_TIME_UNKNOWN); ++ } ++ ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ ret = port_info_get(instance, port); ++ } ++ ++ return ret; ++} ++ ++/* enable a port */ ++static int port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ unsigned int hdr_count; ++ struct list_head *buf_head; ++ int ret; ++ ++ if (port->enabled) ++ return 0; ++ ++ /* ensure there are enough buffers queued to cover the buffer headers */ ++ if (port->buffer_cb != NULL) { ++ hdr_count = 0; ++ list_for_each(buf_head, &port->buffers) { ++ hdr_count++; ++ } ++ if (hdr_count < port->current_buffer.num) ++ return -ENOSPC; ++ } ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE); ++ if (ret) ++ goto done; ++ ++ port->enabled = true; ++ ++ if (port->buffer_cb) { ++ /* send buffer headers to videocore */ ++ hdr_count = 1; ++ list_for_each(buf_head, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ ret = buffer_from_host(instance, port, mmalbuf); ++ if (ret) ++ goto done; ++ ++ hdr_count++; ++ if (hdr_count > port->current_buffer.num) ++ break; ++ } ++ } ++ ++ ret = port_info_get(instance, port); ++ ++done: ++ return ret; ++} ++ ++/* ------------------------------------------------------------------ ++ * Exported API ++ *------------------------------------------------------------------*/ ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_info_set(instance, port); ++ if (ret) ++ goto release_unlock; ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, port); ++ ++release_unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++ ++} ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_set(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 *value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_get(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* enable a port ++ * ++ * enables a port and queues buffers for satisfying callbacks if we ++ * provide a callback handler ++ */ ++int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* already enabled - noop */ ++ if (port->enabled) { ++ ret = 0; ++ goto unlock; ++ } ++ ++ port->buffer_cb = buffer_cb; ++ ++ ret = port_enable(instance, port); ++ ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!port->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = port_disable(instance, port); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ports will be connected in a tunneled manner so data buffers ++ * are not handled by client. ++ */ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* disconnect ports if connected */ ++ if (src->connected != NULL) { ++ ret = port_disable(instance, src); ++ if (ret) { ++ pr_err("failed disabling src port(%d)\n", ret); ++ goto release_unlock; ++ } ++ ++ /* do not need to disable the destination port as they ++ * are connected and it is done automatically ++ */ ++ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, ++ src->connected->component->handle, ++ src->connected->handle); ++ if (ret < 0) { ++ pr_err("failed disconnecting src port\n"); ++ goto release_unlock; ++ } ++ src->connected->enabled = false; ++ src->connected = NULL; ++ } ++ ++ if (dst == NULL) { ++ /* do not make new connection */ ++ ret = 0; ++ pr_debug("not making new connection\n"); ++ goto release_unlock; ++ } ++ ++ /* copy src port format to dst */ ++ dst->format.encoding = src->format.encoding; ++ dst->es.video.width = src->es.video.width; ++ dst->es.video.height = src->es.video.height; ++ dst->es.video.crop.x = src->es.video.crop.x; ++ dst->es.video.crop.y = src->es.video.crop.y; ++ dst->es.video.crop.width = src->es.video.crop.width; ++ dst->es.video.crop.height = src->es.video.crop.height; ++ dst->es.video.frame_rate.num = src->es.video.frame_rate.num; ++ dst->es.video.frame_rate.den = src->es.video.frame_rate.den; ++ ++ /* set new format */ ++ ret = port_info_set(instance, dst); ++ if (ret) { ++ pr_debug("setting port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, dst); ++ if (ret) { ++ pr_debug("read back port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* connect two ports together */ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, ++ dst->component->handle, dst->handle); ++ if (ret < 0) { ++ pr_debug("connecting port %d:%d to %d:%d failed\n", ++ src->component->handle, src->handle, ++ dst->component->handle, dst->handle); ++ goto release_unlock; ++ } ++ src->connected = dst; ++ ++release_unlock: ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buffer) ++{ ++ unsigned long flags = 0; ++ ++ spin_lock_irqsave(&port->slock, flags); ++ list_add_tail(&buffer->list, &port->buffers); ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ /* the port previously underflowed because it was missing a ++ * mmal_buffer which has just been added, submit that buffer ++ * to the mmal service. ++ */ ++ if (port->buffer_underflow) { ++ port_buffer_from_host(instance, port); ++ port->buffer_underflow--; ++ } ++ ++ return 0; ++} ++ ++/* Initialise a mmal component and its ports ++ * ++ */ ++int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out) ++{ ++ int ret; ++ int idx; /* port index */ ++ struct vchiq_mmal_component *component; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { ++ ret = -EINVAL; /* todo is this correct error? */ ++ goto unlock; ++ } ++ ++ component = &instance->component[instance->component_idx]; ++ ++ ret = create_component(instance, component, name); ++ if (ret < 0) ++ goto unlock; ++ ++ /* ports info needs gathering */ ++ component->control.type = MMAL_PORT_TYPE_CONTROL; ++ component->control.index = 0; ++ component->control.component = component; ++ spin_lock_init(&component->control.slock); ++ INIT_LIST_HEAD(&component->control.buffers); ++ ret = port_info_get(instance, &component->control); ++ if (ret < 0) ++ goto release_component; ++ ++ for (idx = 0; idx < component->inputs; idx++) { ++ component->input[idx].type = MMAL_PORT_TYPE_INPUT; ++ component->input[idx].index = idx; ++ component->input[idx].component = component; ++ spin_lock_init(&component->input[idx].slock); ++ INIT_LIST_HEAD(&component->input[idx].buffers); ++ ret = port_info_get(instance, &component->input[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->outputs; idx++) { ++ component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; ++ component->output[idx].index = idx; ++ component->output[idx].component = component; ++ spin_lock_init(&component->output[idx].slock); ++ INIT_LIST_HEAD(&component->output[idx].buffers); ++ ret = port_info_get(instance, &component->output[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->clocks; idx++) { ++ component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; ++ component->clock[idx].index = idx; ++ component->clock[idx].component = component; ++ spin_lock_init(&component->clock[idx].slock); ++ INIT_LIST_HEAD(&component->clock[idx].buffers); ++ ret = port_info_get(instance, &component->clock[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ instance->component_idx++; ++ ++ *component_out = component; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return 0; ++ ++release_component: ++ destroy_component(instance, component); ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be destroyed ++ */ ++int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) ++ ret = disable_component(instance, component); ++ ++ ret = destroy_component(instance, component); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = enable_component(instance, component); ++ if (ret == 0) ++ component->enabled = true; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = disable_component(instance, component); ++ if (ret == 0) ++ component->enabled = false; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = get_version(instance, major_out, minor_out); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) ++{ ++ int status = 0; ++ ++ if (instance == NULL) ++ return -EINVAL; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ vchi_service_use(instance->handle); ++ ++ status = vchi_service_close(instance->handle); ++ if (status != 0) ++ pr_err("mmal-vchiq: VCHIQ close failed"); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ vfree(instance->bulk_scratch); ++ ++ kfree(instance); ++ ++ return status; ++} ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) ++{ ++ int status; ++ struct vchiq_mmal_instance *instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ static VCHI_INSTANCE_T vchi_instance; ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), ++ VC_MMAL_SERVER_NAME, ++ vchi_connection, ++ 0, /* rx fifo size (unused) */ ++ 0, /* tx fifo size (unused) */ ++ service_callback, ++ NULL, /* service callback parameter */ ++ 1, /* unaligned bulk receives */ ++ 1, /* unaligned bulk transmits */ ++ 0 /* want crc check on bulk transfers */ ++ }; ++ ++ /* compile time checks to ensure structure size as they are ++ * directly (de)serialised from memory. ++ */ ++ ++ /* ensure the header structure has packed to the correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); ++ ++ /* ensure message structure does not exceed maximum length */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); ++ ++ /* mmal port struct is correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_port) != 64); ++ ++ /* create a vchi instance */ ++ status = vchi_initialise(&vchi_instance); ++ if (status) { ++ pr_err("Failed to initialise VCHI instance (status=%d)\n", ++ status); ++ return -EIO; ++ } ++ ++ status = vchi_connect(NULL, 0, vchi_instance); ++ if (status) { ++ pr_err("Failed to connect VCHI instance (status=%d)\n", status); ++ return -EIO; ++ } ++ ++ instance = kmalloc(sizeof(*instance), GFP_KERNEL); ++ memset(instance, 0, sizeof(*instance)); ++ ++ mutex_init(&instance->vchiq_mutex); ++ mutex_init(&instance->bulk_mutex); ++ ++ instance->bulk_scratch = vmalloc(PAGE_SIZE); ++ ++ params.callback_param = instance; ++ ++ status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); ++ if (status) { ++ pr_err("Failed to open VCHI service connection (status=%d)\n", ++ status); ++ goto err_close_services; ++ } ++ ++ vchi_service_release(instance->handle); ++ ++ *out_instance = instance; ++ ++ return 0; ++ ++err_close_services: ++ ++ vchi_service_close(instance->handle); ++ vfree(instance->bulk_scratch); ++ kfree(instance); ++ return -ENODEV; ++} +diff --git a/drivers/media/platform/bcm2835/mmal-vchiq.h b/drivers/media/platform/bcm2835/mmal-vchiq.h +new file mode 100644 +index 000000000000..9d1d11e4a53e +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-vchiq.h +@@ -0,0 +1,178 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * MMAL interface to VCHIQ message passing ++ */ ++ ++#ifndef MMAL_VCHIQ_H ++#define MMAL_VCHIQ_H ++ ++#include "mmal-msg-format.h" ++ ++#define MAX_PORT_COUNT 4 ++ ++/* Maximum size of the format extradata. */ ++#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 ++ ++struct vchiq_mmal_instance; ++ ++enum vchiq_mmal_es_type { ++ MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ ++ MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ ++ MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ ++ MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ ++ MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ ++}; ++ ++/* rectangle, used lots so it gets its own struct */ ++struct vchiq_mmal_rect { ++ s32 x; ++ s32 y; ++ s32 width; ++ s32 height; ++}; ++ ++struct vchiq_mmal_port_buffer { ++ unsigned int num; /* number of buffers */ ++ u32 size; /* size of buffers */ ++ u32 alignment; /* alignment of buffers */ ++}; ++ ++struct vchiq_mmal_port; ++ ++typedef void (*vchiq_mmal_buffer_cb)( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ int status, struct mmal_buffer *buffer, ++ unsigned long length, u32 mmal_flags, s64 dts, s64 pts); ++ ++struct vchiq_mmal_port { ++ bool enabled; ++ u32 handle; ++ u32 type; /* port type, cached to use on port info set */ ++ u32 index; /* port index, cached to use on port info set */ ++ ++ /* component port belongs to, allows simple deref */ ++ struct vchiq_mmal_component *component; ++ ++ struct vchiq_mmal_port *connected; /* port conencted to */ ++ ++ /* buffer info */ ++ struct vchiq_mmal_port_buffer minimum_buffer; ++ struct vchiq_mmal_port_buffer recommended_buffer; ++ struct vchiq_mmal_port_buffer current_buffer; ++ ++ /* stream format */ ++ struct mmal_es_format format; ++ /* elementry stream format */ ++ union mmal_es_specific_format es; ++ ++ /* data buffers to fill */ ++ struct list_head buffers; ++ /* lock to serialise adding and removing buffers from list */ ++ spinlock_t slock; ++ /* count of how many buffer header refils have failed because ++ * there was no buffer to satisfy them ++ */ ++ int buffer_underflow; ++ /* callback on buffer completion */ ++ vchiq_mmal_buffer_cb buffer_cb; ++ /* callback context */ ++ void *cb_ctx; ++}; ++ ++struct vchiq_mmal_component { ++ bool enabled; ++ u32 handle; /* VideoCore handle for component */ ++ u32 inputs; /* Number of input ports */ ++ u32 outputs; /* Number of output ports */ ++ u32 clocks; /* Number of clock ports */ ++ struct vchiq_mmal_port control; /* control port */ ++ struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ ++ struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ ++ struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ ++}; ++ ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); ++ ++/* Initialise a mmal component and its ports ++* ++*/ ++int vchiq_mmal_component_init( ++ struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out); ++ ++int vchiq_mmal_component_finalise( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_disable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++ ++ ++/* enable a mmal port ++ * ++ * enables a port and if a buffer callback provided enque buffer ++ * headers as apropriate for the port. ++ */ ++int vchiq_mmal_port_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb); ++ ++/* disable a port ++ * ++ * disable a port will dequeue any pending buffers ++ */ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 value_size); ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 *value_size); ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst); ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, ++ u32 *minor_out); ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buf); ++ ++#endif /* MMAL_VCHIQ_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1051_86973aab9ee65e8aa064ea0c0d31b78d0286d867.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1051_86973aab9ee65e8aa064ea0c0d31b78d0286d867.patch --- linux-4.9.13/debian/patches/rpi/rpi_1051_86973aab9ee65e8aa064ea0c0d31b78d0286d867.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1051_86973aab9ee65e8aa064ea0c0d31b78d0286d867.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,516 @@ +commit 86973aab9ee65e8aa064ea0c0d31b78d0286d867 +Author: Phil Elwell +Date: Mon May 11 09:00:42 2015 +0100 + + scripts: Add mkknlimg and knlinfo scripts from tools repo + + The Raspberry Pi firmware looks for a trailer on the kernel image to + determine whether it was compiled with Device Tree support enabled. + If the firmware finds a kernel without this trailer, or which has a + trailer indicating that it isn't DT-capable, it disables DT support + and reverts to using ATAGs. + + The mkknlimg utility adds that trailer, having first analysed the + image to look for signs of DT support and the kernel version string. + + knlinfo displays the contents of the trailer in the given kernel image. + + scripts/mkknlimg: Add support for ARCH_BCM2835 + + Add a new trailer field indicating whether this is an ARCH_BCM2835 + build, as opposed to MACH_BCM2708/9. If the loader finds this flag + is set it changes the default base dtb file name from bcm270x... + to bcm283y... + + Also update knlinfo to show the status of the field. + + scripts/mkknlimg: Improve ARCH_BCM2835 detection + + The board support code contains sufficient strings to be able to + distinguish 2708 vs. 2835 builds, so remove the check for + bcm2835-pm-wdt which could exist in either. + + Also, since the canned configuration is no longer built in (it's + a module), remove the config string checking. + + See: https://github.com/raspberrypi/linux/issues/1157 + + scripts: Multi-platform support for mkknlimg and knlinfo + + The firmware uses tags in the kernel trailer to choose which dtb file + to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true, + otherwise it loads bcm270*.dtb. This scheme breaks if an image supports + multiple platforms. + + This patch adds '270X' and '283X' tags to indicate support for RPi and + upstream platforms, respectively. '283x' (note lower case 'x') is left + for old firmware, and is only set if the image only supports upstream + builds. + + scripts/mkknlimg: Append a trailer for all input + + Now that the firmware assumes an unsigned kernel is DT-capable, it is + helpful to be able to mark a kernel as being non-DT-capable. + + Signed-off-by: Phil Elwell + + scripts/knlinfo: Decode DDTK atom + + Show the DDTK atom as being a boolean. + + Signed-off-by: Phil Elwell + + mkknlimg: Retain downstream-kernel detection + + With the death of ARCH_BCM2708 and ARCH_BCM2709, a new way is needed to + determine if this is a "downstream" build that wants the firmware to + load a bcm27xx .dtb. The vc_cma driver is used downstream but not + upstream, making vc_cma_init a suitable predicate symbol. + +diff --git a/scripts/knlinfo b/scripts/knlinfo +new file mode 100755 +index 000000000000..263ec937eaa7 +--- /dev/null ++++ b/scripts/knlinfo +@@ -0,0 +1,171 @@ ++#!/usr/bin/env perl ++# ---------------------------------------------------------------------- ++# knlinfo by Phil Elwell for Raspberry Pi ++# ++# (c) 2014,2015 Raspberry Pi (Trading) Limited ++# ++# Licensed under the terms of the GNU General Public License. ++# ---------------------------------------------------------------------- ++ ++use strict; ++use integer; ++ ++use Fcntl ":seek"; ++ ++my $trailer_magic = 'RPTL'; ++ ++my %atom_formats = ++( ++ 'DDTK' => \&format_bool, ++ 'DTOK' => \&format_bool, ++ 'KVer' => \&format_string, ++ '270X' => \&format_bool, ++ '283X' => \&format_bool, ++ '283x' => \&format_bool, ++); ++ ++if (@ARGV != 1) ++{ ++ print ("Usage: knlinfo \n"); ++ exit(1); ++} ++ ++my $kernel_file = $ARGV[0]; ++ ++ ++my ($atoms, $pos) = read_trailer($kernel_file); ++ ++exit(1) if (!$atoms); ++ ++printf("Kernel trailer found at %d/0x%x:\n", $pos, $pos); ++ ++foreach my $atom (@$atoms) ++{ ++ printf(" %s: %s\n", $atom->[0], format_atom($atom)); ++} ++ ++exit(0); ++ ++sub read_trailer ++{ ++ my ($kernel_file) = @_; ++ my $fh; ++ ++ if (!open($fh, '<', $kernel_file)) ++ { ++ print ("* Failed to open '$kernel_file'\n"); ++ return undef; ++ } ++ ++ if (!seek($fh, -12, SEEK_END)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ my $last_bytes; ++ sysread($fh, $last_bytes, 12); ++ ++ my ($trailer_len, $data_len, $magic) = unpack('VVa4', $last_bytes); ++ ++ if (($magic ne $trailer_magic) || ($data_len != 4)) ++ { ++ print ("* no trailer\n"); ++ return undef; ++ } ++ if (!seek($fh, -12, SEEK_END)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ $trailer_len -= 12; ++ ++ while ($trailer_len > 0) ++ { ++ if ($trailer_len < 8) ++ { ++ print ("* truncated atom header in trailer\n"); ++ return undef; ++ } ++ if (!seek($fh, -8, SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ $trailer_len -= 8; ++ ++ my $atom_hdr; ++ sysread($fh, $atom_hdr, 8); ++ my ($atom_len, $atom_type) = unpack('Va4', $atom_hdr); ++ ++ if ($trailer_len < $atom_len) ++ { ++ print ("* truncated atom data in trailer\n"); ++ return undef; ++ } ++ ++ my $rounded_len = (($atom_len + 3) & ~3); ++ if (!seek($fh, -(8 + $rounded_len), SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ $trailer_len -= $rounded_len; ++ ++ my $atom_data; ++ sysread($fh, $atom_data, $atom_len); ++ ++ if (!seek($fh, -$atom_len, SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ push @$atoms, [ $atom_type, $atom_data ]; ++ } ++ ++ if (($$atoms[-1][0] eq "\x00\x00\x00\x00") && ++ ($$atoms[-1][1] eq "")) ++ { ++ pop @$atoms; ++ } ++ else ++ { ++ print ("* end marker missing from trailer\n"); ++ } ++ ++ return ($atoms, tell($fh)); ++} ++ ++sub format_atom ++{ ++ my ($atom) = @_; ++ ++ my $format_func = $atom_formats{$atom->[0]} || \&format_hex; ++ return $format_func->($atom->[1]); ++} ++ ++sub format_bool ++{ ++ my ($data) = @_; ++ return unpack('V', $data) ? 'y' : 'n'; ++} ++ ++sub format_int ++{ ++ my ($data) = @_; ++ return unpack('V', $data); ++} ++ ++sub format_string ++{ ++ my ($data) = @_; ++ return '"'.$data.'"'; ++} ++ ++sub format_hex ++{ ++ my ($data) = @_; ++ return unpack('H*', $data); ++} +diff --git a/scripts/mkknlimg b/scripts/mkknlimg +new file mode 100755 +index 000000000000..60206de7fa9a +--- /dev/null ++++ b/scripts/mkknlimg +@@ -0,0 +1,264 @@ ++#!/usr/bin/env perl ++# ---------------------------------------------------------------------- ++# mkknlimg by Phil Elwell for Raspberry Pi ++# based on extract-ikconfig by Dick Streefland ++# ++# (c) 2009,2010 Dick Streefland ++# (c) 2014,2015 Raspberry Pi (Trading) Limited ++# ++# Licensed under the terms of the GNU General Public License. ++# ---------------------------------------------------------------------- ++ ++use strict; ++use warnings; ++use integer; ++ ++use constant FLAG_PI => 0x01; ++use constant FLAG_DTOK => 0x02; ++use constant FLAG_DDTK => 0x04; ++use constant FLAG_270X => 0x08; ++use constant FLAG_283X => 0x10; ++ ++my $trailer_magic = 'RPTL'; ++ ++my $tmpfile1 = "/tmp/mkknlimg_$$.1"; ++my $tmpfile2 = "/tmp/mkknlimg_$$.2"; ++ ++my $dtok = 0; ++my $ddtk = 0; ++my $is_270x = 0; ++my $is_283x = 0; ++ ++while (@ARGV && ($ARGV[0] =~ /^-/)) ++{ ++ my $arg = shift(@ARGV); ++ if ($arg eq '--dtok') ++ { ++ $dtok = 1; ++ } ++ elsif ($arg eq '--ddtk') ++ { ++ $ddtk = 1; ++ } ++ elsif ($arg eq '--270x') ++ { ++ $is_270x = 1; ++ } ++ elsif ($arg eq '--283x') ++ { ++ $is_283x = 1; ++ } ++ else ++ { ++ print ("* Unknown option '$arg'\n"); ++ usage(); ++ } ++} ++ ++usage() if (@ARGV != 2); ++ ++my $kernel_file = $ARGV[0]; ++my $out_file = $ARGV[1]; ++ ++if (! -r $kernel_file) ++{ ++ print ("* File '$kernel_file' not found\n"); ++ usage(); ++} ++ ++my $wanted_strings = ++{ ++ 'bcm2708_fb' => FLAG_PI, ++ 'brcm,bcm2835-mmc' => FLAG_PI, ++ 'brcm,bcm2835-sdhost' => FLAG_PI, ++ 'brcm,bcm2708-pinctrl' => FLAG_PI | FLAG_DTOK, ++ 'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK, ++ 'brcm,bcm2708' => FLAG_PI | FLAG_DTOK | FLAG_270X, ++ 'brcm,bcm2709' => FLAG_PI | FLAG_DTOK | FLAG_270X, ++ 'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X, ++ 'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X, ++ 'of_cfs_init' => FLAG_DTOK | FLAG_DDTK, ++ 'vc_cma_init' => FLAG_PI | FLAG_270X, ++}; ++ ++my $res = try_extract($kernel_file, $tmpfile1); ++$res ||= try_decompress('\037\213\010', 'xy', 'gunzip', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('BZh', 'xy', 'bunzip2', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\211\114\132', 'xy', 'lzop -d', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1, ++ $kernel_file, $tmpfile1, $tmpfile2); ++ ++my $append_trailer; ++my $trailer; ++my $kver = '?'; ++ ++$append_trailer = 1; ++ ++if ($res) ++{ ++ $kver = $res->{'kver'} || '?'; ++ my $flags = $res->{'flags'}; ++ print("Version: $kver\n"); ++ ++ if ($flags & FLAG_PI) ++ { ++ $dtok ||= ($flags & FLAG_DTOK) != 0; ++ $is_270x ||= ($flags & FLAG_270X) != 0; ++ $is_283x ||= ($flags & FLAG_283X) != 0; ++ $ddtk ||= ($flags & FLAG_DDTK) != 0; ++ } ++ else ++ { ++ print ("* This doesn't look like a Raspberry Pi kernel.\n"); ++ } ++} ++elsif (!$dtok) ++{ ++ print ("* Is this a valid kernel?\n"); ++} ++ ++if ($append_trailer) ++{ ++ printf("DT: %s\n", $dtok ? "y" : "n"); ++ printf("DDT: %s\n", $ddtk ? "y" : "n"); ++ printf("270x: %s\n", $is_270x ? "y" : "n"); ++ printf("283x: %s\n", $is_283x ? "y" : "n"); ++ ++ my @atoms; ++ ++ push @atoms, [ $trailer_magic, pack('V', 0) ]; ++ push @atoms, [ 'KVer', $kver ]; ++ push @atoms, [ 'DTOK', pack('V', $dtok) ]; ++ push @atoms, [ 'DDTK', pack('V', $ddtk) ]; ++ push @atoms, [ '270X', pack('V', $is_270x) ]; ++ push @atoms, [ '283X', pack('V', $is_283x) ]; ++ push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ]; ++ ++ $trailer = pack_trailer(\@atoms); ++ $atoms[0]->[1] = pack('V', length($trailer)); ++ ++ $trailer = pack_trailer(\@atoms); ++} ++ ++my $ofh; ++my $total_len = 0; ++ ++if ($out_file eq $kernel_file) ++{ ++ die "* Failed to open '$out_file' for append\n" ++ if (!open($ofh, '>>', $out_file)); ++ $total_len = tell($ofh); ++} ++else ++{ ++ die "* Failed to open '$kernel_file'\n" ++ if (!open(my $ifh, '<', $kernel_file)); ++ die "* Failed to create '$out_file'\n" ++ if (!open($ofh, '>', $out_file)); ++ ++ my $copybuf; ++ while (1) ++ { ++ my $bytes = sysread($ifh, $copybuf, 64*1024); ++ last if (!$bytes); ++ syswrite($ofh, $copybuf, $bytes); ++ $total_len += $bytes; ++ } ++ close($ifh); ++} ++ ++if ($trailer) ++{ ++ # Pad to word-alignment ++ syswrite($ofh, "\x000\x000\x000", (-$total_len & 0x3)); ++ syswrite($ofh, $trailer); ++} ++ ++close($ofh); ++ ++exit($trailer ? 0 : 1); ++ ++END { ++ unlink($tmpfile1) if ($tmpfile1); ++ unlink($tmpfile2) if ($tmpfile2); ++} ++ ++ ++sub usage ++{ ++ print ("Usage: mkknlimg [--dtok] [--270x] [--283x] \n"); ++ exit(1); ++} ++ ++sub try_extract ++{ ++ my ($knl, $tmp) = @_; ++ ++ my $ver = `strings "$knl" | grep -a -E "^Linux version [1-9]"`; ++ ++ return undef if (!$ver); ++ ++ chomp($ver); ++ ++ my $res = { 'kver'=>$ver }; ++ $res->{'flags'} = strings_to_flags($knl, $wanted_strings); ++ ++ return $res; ++} ++ ++ ++sub try_decompress ++{ ++ my ($magic, $subst, $zcat, $idx, $knl, $tmp1, $tmp2) = @_; ++ ++ my $pos = `tr "$magic\n$subst" "\n$subst=" < "$knl" | grep -abo "^$subst"`; ++ if ($pos) ++ { ++ chomp($pos); ++ $pos = (split(/[\r\n]+/, $pos))[$idx]; ++ return undef if (!defined($pos)); ++ $pos =~ s/:.*[\r\n]*$//s; ++ my $cmd = "tail -c+$pos \"$knl\" | $zcat > $tmp2 2> /dev/null"; ++ my $err = (system($cmd) >> 8); ++ return undef if (($err != 0) && ($err != 2)); ++ ++ return try_extract($tmp2, $tmp1); ++ } ++ ++ return undef; ++} ++ ++sub strings_to_flags ++{ ++ my ($knl, $strings) = @_; ++ my $string_pattern = '^('.join('|', keys(%$strings)).')$'; ++ my $flags = 0; ++ ++ my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`; ++ foreach my $match (@matches) ++ { ++ chomp($match); ++ $flags |= $strings->{$match}; ++ } ++ ++ return $flags; ++} ++ ++sub pack_trailer ++{ ++ my ($atoms) = @_; ++ my $trailer = pack('VV', 0, 0); ++ for (my $i = $#$atoms; $i>=0; $i--) ++ { ++ my $atom = $atoms->[$i]; ++ $trailer .= pack('a*x!4Va4', $atom->[1], length($atom->[1]), $atom->[0]); ++ } ++ return $trailer; ++} diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1052_7b18501f93e4f8d42cf37ee6d40e926bb90c39d7.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1052_7b18501f93e4f8d42cf37ee6d40e926bb90c39d7.patch --- linux-4.9.13/debian/patches/rpi/rpi_1052_7b18501f93e4f8d42cf37ee6d40e926bb90c39d7.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1052_7b18501f93e4f8d42cf37ee6d40e926bb90c39d7.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,2842 @@ +commit 7b18501f93e4f8d42cf37ee6d40e926bb90c39d7 +Author: Phil Elwell +Date: Mon Aug 10 09:49:15 2015 +0100 + + scripts/dtc: Update to upstream version 1.4.1 + + Includes the new localfixups format. + + Signed-off-by: Phil Elwell + + scripts/dtc: Fix UMR causing corrupt dtbo overlay files + + struct fixup_entry is allocated from the heap but it's member + local_fixup_generated was never initialized. This lead to + corrupted dtbo files. + + Fix this by initializing local_fixup_generated to false. + + Signed-off-by: Matthias Reichl + + scripts/dtc: Only emit local fixups for overlays + + Signed-off-by: Phil Elwell + +diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c +index 386f9563313f..2164d8fe5f98 100644 +--- a/scripts/dtc/checks.c ++++ b/scripts/dtc/checks.c +@@ -482,6 +482,8 @@ static void fixup_phandle_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) + { + struct marker *m = prop->val.markers; ++ struct fixup *f, **fp; ++ struct fixup_entry *fe, **fep; + struct node *refnode; + cell_t phandle; + +@@ -490,11 +492,70 @@ static void fixup_phandle_references(struct check *c, struct node *dt, + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { +- FAIL(c, "Reference to non-existent node or label \"%s\"\n", +- m->ref); ++ if (!dt->is_plugin) { ++ FAIL(c, "Reference to non-existent node or label \"%s\"\n", ++ m->ref); ++ continue; ++ } ++ ++ /* allocate fixup entry */ ++ fe = xmalloc(sizeof(*fe)); ++ ++ fe->node = node; ++ fe->prop = prop; ++ fe->offset = m->offset; ++ fe->next = NULL; ++ ++ /* search for an already existing fixup */ ++ for_each_fixup(dt, f) ++ if (strcmp(f->ref, m->ref) == 0) ++ break; ++ ++ /* no fixup found, add new */ ++ if (f == NULL) { ++ f = xmalloc(sizeof(*f)); ++ f->ref = m->ref; ++ f->entries = NULL; ++ f->next = NULL; ++ ++ /* add it to the tree */ ++ fp = &dt->fixups; ++ while (*fp) ++ fp = &(*fp)->next; ++ *fp = f; ++ } ++ ++ /* and now append fixup entry */ ++ fep = &f->entries; ++ while (*fep) ++ fep = &(*fep)->next; ++ *fep = fe; ++ ++ /* mark the entry as unresolved */ ++ *((cell_t *)(prop->val.val + m->offset)) = ++ cpu_to_fdt32(0xdeadbeef); + continue; + } + ++ /* if it's a local reference, we need to record it */ ++ if (symbol_fixup_support && dt->is_plugin) { ++ ++ /* allocate a new local fixup entry */ ++ fe = xmalloc(sizeof(*fe)); ++ ++ fe->node = node; ++ fe->prop = prop; ++ fe->offset = m->offset; ++ fe->next = NULL; ++ fe->local_fixup_generated = false; ++ ++ /* append it to the local fixups */ ++ fep = &dt->local_fixups; ++ while (*fep) ++ fep = &(*fep)->next; ++ *fep = fe; ++ } ++ + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); + } +@@ -676,6 +737,45 @@ static void check_obsolete_chosen_interrupt_controller(struct check *c, + } + TREE_WARNING(obsolete_chosen_interrupt_controller, NULL); + ++static void check_auto_label_phandles(struct check *c, struct node *dt, ++ struct node *node) ++{ ++ struct label *l; ++ struct symbol *s, **sp; ++ int has_label; ++ ++ if (!symbol_fixup_support) ++ return; ++ ++ has_label = 0; ++ for_each_label(node->labels, l) { ++ has_label = 1; ++ break; ++ } ++ ++ if (!has_label) ++ return; ++ ++ /* force allocation of a phandle for this node */ ++ (void)get_node_phandle(dt, node); ++ ++ /* add the symbol */ ++ for_each_label(node->labels, l) { ++ ++ s = xmalloc(sizeof(*s)); ++ s->label = l; ++ s->node = node; ++ s->next = NULL; ++ ++ /* add it to the symbols list */ ++ sp = &dt->symbols; ++ while (*sp) ++ sp = &((*sp)->next); ++ *sp = s; ++ } ++} ++NODE_WARNING(auto_label_phandles, NULL); ++ + static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &node_name_chars, &node_name_format, &property_name_chars, +@@ -696,6 +796,8 @@ static struct check *check_table[] = { + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, + ++ &auto_label_phandles, ++ + &always_fail, + }; + +diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l +index 790fbf6cf2d7..40bbc87d0f1d 100644 +--- a/scripts/dtc/dtc-lexer.l ++++ b/scripts/dtc/dtc-lexer.l +@@ -121,6 +121,11 @@ static void lexical_error(const char *fmt, ...); + return DT_V1; + } + ++<*>"/plugin/" { ++ DPRINT("Keyword: /plugin/\n"); ++ return DT_PLUGIN; ++ } ++ + <*>"/memreserve/" { + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); +diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped +index ba525c2f9fc2..15185255fafd 100644 +--- a/scripts/dtc/dtc-lexer.lex.c_shipped ++++ b/scripts/dtc/dtc-lexer.lex.c_shipped +@@ -9,7 +9,7 @@ + #define FLEX_SCANNER + #define YY_FLEX_MAJOR_VERSION 2 + #define YY_FLEX_MINOR_VERSION 5 +-#define YY_FLEX_SUBMINOR_VERSION 39 ++#define YY_FLEX_SUBMINOR_VERSION 35 + #if YY_FLEX_SUBMINOR_VERSION > 0 + #define FLEX_BETA + #endif +@@ -162,12 +162,7 @@ typedef unsigned int flex_uint32_t; + typedef struct yy_buffer_state *YY_BUFFER_STATE; + #endif + +-#ifndef YY_TYPEDEF_YY_SIZE_T +-#define YY_TYPEDEF_YY_SIZE_T +-typedef size_t yy_size_t; +-#endif +- +-extern yy_size_t yyleng; ++extern int yyleng; + + extern FILE *yyin, *yyout; + +@@ -176,7 +171,6 @@ extern FILE *yyin, *yyout; + #define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) +- #define YY_LINENO_REWIND_TO(ptr) + + /* Return all but the first "n" matched characters back to the input stream. */ + #define yyless(n) \ +@@ -194,6 +188,11 @@ extern FILE *yyin, *yyout; + + #define unput(c) yyunput( c, (yytext_ptr) ) + ++#ifndef YY_TYPEDEF_YY_SIZE_T ++#define YY_TYPEDEF_YY_SIZE_T ++typedef size_t yy_size_t; ++#endif ++ + #ifndef YY_STRUCT_YY_BUFFER_STATE + #define YY_STRUCT_YY_BUFFER_STATE + struct yy_buffer_state +@@ -211,7 +210,7 @@ struct yy_buffer_state + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ +- yy_size_t yy_n_chars; ++ int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to +@@ -281,8 +280,8 @@ static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + + /* yy_hold_char holds the character lost when yytext is formed. */ + static char yy_hold_char; +-static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +-yy_size_t yyleng; ++static int yy_n_chars; /* number of characters read into yy_ch_buf */ ++int yyleng; + + /* Points to current character in buffer. */ + static char *yy_c_buf_p = (char *) 0; +@@ -310,7 +309,7 @@ static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + + YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); + YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); ++YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + + void *yyalloc (yy_size_t ); + void *yyrealloc (void *,yy_size_t ); +@@ -342,7 +341,7 @@ void yyfree (void * ); + + /* Begin user sect3 */ + +-#define yywrap() 1 ++#define yywrap(n) 1 + #define YY_SKIP_YYWRAP + + typedef unsigned char YY_CHAR; +@@ -373,8 +372,8 @@ static void yy_fatal_error (yyconst char msg[] ); + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +-#define YY_NUM_RULES 30 +-#define YY_END_OF_BUFFER 31 ++#define YY_NUM_RULES 31 ++#define YY_END_OF_BUFFER 32 + /* This struct is not used in this scanner, + but its presence is necessary. */ + struct yy_trans_info +@@ -382,25 +381,26 @@ struct yy_trans_info + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +-static yyconst flex_int16_t yy_accept[159] = ++static yyconst flex_int16_t yy_accept[166] = + { 0, +- 0, 0, 0, 0, 0, 0, 0, 0, 31, 29, +- 18, 18, 29, 29, 29, 29, 29, 29, 29, 29, +- 29, 29, 29, 29, 29, 29, 15, 16, 16, 29, +- 16, 10, 10, 18, 26, 0, 3, 0, 27, 12, +- 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, +- 21, 23, 25, 24, 22, 0, 9, 28, 0, 0, +- 0, 14, 14, 16, 16, 16, 10, 10, 10, 0, +- 12, 0, 11, 0, 0, 0, 20, 0, 0, 0, +- 0, 0, 0, 0, 0, 16, 10, 10, 10, 0, +- 13, 19, 0, 0, 0, 0, 0, 0, 0, 0, +- +- 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, +- 0, 16, 6, 0, 0, 0, 0, 0, 0, 2, +- 0, 0, 0, 0, 0, 0, 0, 0, 4, 17, +- 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, +- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, +- 5, 8, 0, 0, 0, 0, 7, 0 ++ 0, 0, 0, 0, 0, 0, 0, 0, 32, 30, ++ 19, 19, 30, 30, 30, 30, 30, 30, 30, 30, ++ 30, 30, 30, 30, 30, 30, 16, 17, 17, 30, ++ 17, 11, 11, 19, 27, 0, 3, 0, 28, 13, ++ 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, ++ 0, 22, 24, 26, 25, 23, 0, 10, 29, 0, ++ 0, 0, 15, 15, 17, 17, 17, 11, 11, 11, ++ 0, 13, 0, 12, 0, 0, 0, 21, 0, 0, ++ 0, 0, 0, 0, 0, 0, 0, 17, 11, 11, ++ 11, 0, 14, 20, 0, 0, 0, 0, 0, 0, ++ ++ 0, 0, 0, 0, 17, 0, 0, 0, 0, 0, ++ 0, 0, 0, 0, 0, 17, 7, 0, 0, 0, ++ 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, ++ 0, 0, 0, 0, 4, 18, 0, 0, 5, 2, ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ++ 0, 0, 1, 0, 0, 0, 0, 6, 9, 0, ++ 0, 0, 0, 8, 0 + } ; + + static yyconst flex_int32_t yy_ec[256] = +@@ -416,9 +416,9 @@ static yyconst flex_int32_t yy_ec[256] = + 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, + 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, + +- 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, +- 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, +- 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, ++ 31, 21, 32, 22, 33, 22, 22, 34, 35, 36, ++ 37, 38, 22, 39, 40, 41, 42, 43, 22, 25, ++ 44, 22, 45, 46, 47, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, +@@ -435,163 +435,165 @@ static yyconst flex_int32_t yy_ec[256] = + 1, 1, 1, 1, 1 + } ; + +-static yyconst flex_int32_t yy_meta[47] = ++static yyconst flex_int32_t yy_meta[48] = + { 0, + 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, + 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, + 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, + 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, +- 8, 8, 8, 3, 1, 4 ++ 8, 8, 8, 8, 3, 1, 4 + } ; + +-static yyconst flex_int16_t yy_base[173] = ++static yyconst flex_int16_t yy_base[180] = + { 0, +- 0, 383, 34, 382, 65, 381, 37, 105, 387, 391, +- 54, 111, 367, 110, 109, 109, 112, 41, 366, 104, +- 367, 338, 124, 117, 0, 144, 391, 0, 121, 0, +- 135, 155, 140, 179, 391, 160, 391, 379, 391, 0, +- 368, 141, 391, 167, 370, 376, 346, 103, 342, 345, +- 391, 391, 391, 391, 391, 358, 391, 391, 175, 342, +- 338, 391, 355, 0, 185, 339, 184, 347, 346, 0, +- 0, 322, 175, 357, 175, 363, 352, 324, 330, 323, +- 332, 326, 201, 324, 329, 322, 391, 333, 181, 309, +- 391, 341, 340, 313, 320, 338, 178, 311, 146, 317, +- +- 314, 315, 335, 331, 303, 300, 309, 299, 308, 188, +- 336, 335, 391, 305, 320, 281, 283, 271, 203, 288, +- 281, 271, 266, 264, 245, 242, 208, 104, 391, 391, +- 244, 218, 204, 219, 206, 224, 201, 212, 204, 229, +- 215, 208, 207, 200, 219, 391, 233, 221, 200, 181, +- 391, 391, 149, 122, 86, 41, 391, 391, 245, 251, +- 259, 263, 267, 273, 280, 284, 292, 300, 304, 310, +- 318, 326 ++ 0, 393, 35, 392, 66, 391, 38, 107, 397, 401, ++ 55, 113, 377, 112, 111, 111, 114, 42, 376, 106, ++ 377, 347, 126, 120, 0, 147, 401, 0, 124, 0, ++ 137, 158, 170, 163, 401, 153, 401, 389, 401, 0, ++ 378, 120, 401, 131, 380, 386, 355, 139, 351, 355, ++ 351, 401, 401, 401, 401, 401, 367, 401, 401, 185, ++ 350, 346, 401, 364, 0, 185, 347, 189, 356, 355, ++ 0, 0, 330, 180, 366, 141, 372, 361, 332, 338, ++ 331, 341, 334, 326, 205, 331, 337, 329, 401, 341, ++ 167, 316, 401, 349, 348, 320, 328, 346, 180, 318, ++ ++ 324, 209, 324, 320, 322, 342, 338, 309, 306, 315, ++ 305, 315, 312, 192, 342, 341, 401, 293, 306, 282, ++ 268, 252, 255, 203, 285, 282, 272, 268, 252, 233, ++ 232, 239, 208, 107, 401, 401, 238, 211, 401, 211, ++ 212, 208, 228, 203, 215, 207, 233, 222, 212, 211, ++ 203, 227, 401, 237, 225, 204, 185, 401, 401, 149, ++ 128, 88, 42, 401, 401, 253, 259, 267, 271, 275, ++ 281, 288, 292, 300, 308, 312, 318, 326, 334 + } ; + +-static yyconst flex_int16_t yy_def[173] = ++static yyconst flex_int16_t yy_def[180] = + { 0, +- 158, 1, 1, 3, 158, 5, 1, 1, 158, 158, +- 158, 158, 158, 159, 160, 161, 158, 158, 158, 158, +- 162, 158, 158, 158, 163, 162, 158, 164, 165, 164, +- 164, 158, 158, 158, 158, 159, 158, 159, 158, 166, +- 158, 161, 158, 161, 167, 168, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 162, 158, 158, 158, 158, +- 158, 158, 162, 164, 165, 164, 158, 158, 158, 169, +- 166, 170, 161, 167, 167, 168, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 164, 158, 158, 169, 170, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- +- 158, 164, 158, 158, 158, 158, 158, 158, 158, 171, +- 158, 164, 158, 158, 158, 158, 158, 158, 171, 158, +- 171, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 172, 158, 158, 158, 172, 158, 172, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 0, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158 ++ 165, 1, 1, 3, 165, 5, 1, 1, 165, 165, ++ 165, 165, 165, 166, 167, 168, 165, 165, 165, 165, ++ 169, 165, 165, 165, 170, 169, 165, 171, 172, 171, ++ 171, 165, 165, 165, 165, 166, 165, 166, 165, 173, ++ 165, 168, 165, 168, 174, 175, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 169, 165, 165, 165, ++ 165, 165, 165, 169, 171, 172, 171, 165, 165, 165, ++ 176, 173, 177, 168, 174, 174, 175, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 171, 165, 165, ++ 176, 177, 165, 165, 165, 165, 165, 165, 165, 165, ++ ++ 165, 165, 165, 165, 171, 165, 165, 165, 165, 165, ++ 165, 165, 165, 178, 165, 171, 165, 165, 165, 165, ++ 165, 165, 165, 178, 165, 178, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 179, 165, 165, ++ 165, 179, 165, 179, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 0, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165 + } ; + +-static yyconst flex_int16_t yy_nxt[438] = ++static yyconst flex_int16_t yy_nxt[449] = + { 0, + 10, 11, 12, 11, 13, 14, 10, 15, 16, 10, + 10, 10, 17, 10, 10, 10, 10, 18, 19, 20, + 21, 21, 21, 21, 21, 10, 10, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, +- 21, 21, 21, 10, 22, 10, 24, 25, 25, 25, +- 32, 33, 33, 157, 26, 34, 34, 34, 51, 52, +- 27, 26, 26, 26, 26, 10, 11, 12, 11, 13, +- 14, 28, 15, 16, 28, 28, 28, 24, 28, 28, +- 28, 10, 18, 19, 20, 29, 29, 29, 29, 29, +- 30, 10, 29, 29, 29, 29, 29, 29, 29, 29, +- +- 29, 29, 29, 29, 29, 29, 29, 29, 10, 22, +- 10, 23, 34, 34, 34, 37, 39, 43, 32, 33, +- 33, 45, 54, 55, 46, 59, 45, 64, 156, 46, +- 64, 64, 64, 79, 44, 38, 59, 57, 134, 47, +- 135, 48, 80, 49, 47, 50, 48, 99, 61, 43, +- 50, 110, 41, 67, 67, 67, 60, 63, 63, 63, +- 57, 155, 68, 69, 63, 37, 44, 66, 67, 67, +- 67, 63, 63, 63, 63, 73, 59, 68, 69, 70, +- 34, 34, 34, 43, 75, 38, 154, 92, 83, 83, +- 83, 64, 44, 120, 64, 64, 64, 67, 67, 67, +- +- 44, 57, 99, 68, 69, 107, 68, 69, 120, 127, +- 108, 153, 152, 121, 83, 83, 83, 133, 133, 133, +- 146, 133, 133, 133, 146, 140, 140, 140, 121, 141, +- 140, 140, 140, 151, 141, 158, 150, 149, 148, 144, +- 147, 143, 142, 139, 147, 36, 36, 36, 36, 36, +- 36, 36, 36, 40, 138, 137, 136, 40, 40, 42, +- 42, 42, 42, 42, 42, 42, 42, 56, 56, 56, +- 56, 62, 132, 62, 64, 131, 130, 64, 129, 64, +- 64, 65, 128, 158, 65, 65, 65, 65, 71, 127, +- 71, 71, 74, 74, 74, 74, 74, 74, 74, 74, +- +- 76, 76, 76, 76, 76, 76, 76, 76, 89, 126, +- 89, 90, 125, 90, 90, 124, 90, 90, 119, 119, +- 119, 119, 119, 119, 119, 119, 145, 145, 145, 145, +- 145, 145, 145, 145, 123, 122, 59, 59, 118, 117, +- 116, 115, 114, 113, 45, 112, 108, 111, 109, 106, +- 105, 104, 46, 103, 91, 87, 102, 101, 100, 98, +- 97, 96, 95, 94, 93, 77, 75, 91, 88, 87, +- 86, 57, 85, 84, 57, 82, 81, 78, 77, 75, +- 72, 158, 58, 57, 53, 35, 158, 31, 23, 23, +- 9, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158 ++ 21, 21, 21, 21, 10, 22, 10, 24, 25, 25, ++ 25, 32, 33, 33, 164, 26, 34, 34, 34, 52, ++ 53, 27, 26, 26, 26, 26, 10, 11, 12, 11, ++ 13, 14, 28, 15, 16, 28, 28, 28, 24, 28, ++ 28, 28, 10, 18, 19, 20, 29, 29, 29, 29, ++ 29, 30, 10, 29, 29, 29, 29, 29, 29, 29, ++ ++ 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, ++ 10, 22, 10, 23, 34, 34, 34, 37, 39, 43, ++ 32, 33, 33, 45, 55, 56, 46, 60, 43, 45, ++ 65, 163, 46, 65, 65, 65, 44, 38, 60, 74, ++ 58, 47, 141, 48, 142, 44, 49, 47, 50, 48, ++ 76, 51, 62, 94, 50, 41, 44, 51, 37, 61, ++ 64, 64, 64, 58, 34, 34, 34, 64, 162, 80, ++ 67, 68, 68, 68, 64, 64, 64, 64, 38, 81, ++ 69, 70, 71, 68, 68, 68, 60, 161, 43, 69, ++ 70, 65, 69, 70, 65, 65, 65, 125, 85, 85, ++ ++ 85, 58, 68, 68, 68, 44, 102, 110, 125, 133, ++ 102, 69, 70, 111, 114, 160, 159, 126, 85, 85, ++ 85, 140, 140, 140, 140, 140, 140, 153, 126, 147, ++ 147, 147, 153, 148, 147, 147, 147, 158, 148, 165, ++ 157, 156, 155, 151, 150, 149, 146, 154, 145, 144, ++ 143, 139, 154, 36, 36, 36, 36, 36, 36, 36, ++ 36, 40, 138, 137, 136, 40, 40, 42, 42, 42, ++ 42, 42, 42, 42, 42, 57, 57, 57, 57, 63, ++ 135, 63, 65, 134, 165, 65, 133, 65, 65, 66, ++ 132, 131, 66, 66, 66, 66, 72, 130, 72, 72, ++ ++ 75, 75, 75, 75, 75, 75, 75, 75, 77, 77, ++ 77, 77, 77, 77, 77, 77, 91, 129, 91, 92, ++ 128, 92, 92, 127, 92, 92, 124, 124, 124, 124, ++ 124, 124, 124, 124, 152, 152, 152, 152, 152, 152, ++ 152, 152, 60, 60, 123, 122, 121, 120, 119, 118, ++ 117, 45, 116, 111, 115, 113, 112, 109, 108, 107, ++ 46, 106, 93, 89, 105, 104, 103, 101, 100, 99, ++ 98, 97, 96, 95, 78, 76, 93, 90, 89, 88, ++ 58, 87, 86, 58, 84, 83, 82, 79, 78, 76, ++ 73, 165, 59, 58, 54, 35, 165, 31, 23, 23, ++ ++ 9, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165 + } ; + +-static yyconst flex_int16_t yy_chk[438] = ++static yyconst flex_int16_t yy_chk[449] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, +- 1, 1, 1, 1, 1, 1, 3, 3, 3, 3, +- 7, 7, 7, 156, 3, 11, 11, 11, 18, 18, +- 3, 3, 3, 3, 3, 5, 5, 5, 5, 5, ++ 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, ++ 3, 7, 7, 7, 163, 3, 11, 11, 11, 18, ++ 18, 3, 3, 3, 3, 3, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, +- 5, 8, 12, 12, 12, 14, 15, 16, 8, 8, +- 8, 17, 20, 20, 17, 23, 24, 29, 155, 24, +- 29, 29, 29, 48, 16, 14, 31, 29, 128, 17, +- 128, 17, 48, 17, 24, 17, 24, 99, 24, 42, +- 24, 99, 15, 33, 33, 33, 23, 26, 26, 26, +- 26, 154, 33, 33, 26, 36, 42, 31, 32, 32, +- 32, 26, 26, 26, 26, 44, 59, 32, 32, 32, +- 34, 34, 34, 73, 75, 36, 153, 75, 59, 59, +- 59, 65, 44, 110, 65, 65, 65, 67, 67, 67, +- +- 73, 65, 83, 89, 89, 97, 67, 67, 119, 127, +- 97, 150, 149, 110, 83, 83, 83, 133, 133, 133, +- 141, 127, 127, 127, 145, 136, 136, 136, 119, 136, +- 140, 140, 140, 148, 140, 147, 144, 143, 142, 139, +- 141, 138, 137, 135, 145, 159, 159, 159, 159, 159, +- 159, 159, 159, 160, 134, 132, 131, 160, 160, 161, +- 161, 161, 161, 161, 161, 161, 161, 162, 162, 162, +- 162, 163, 126, 163, 164, 125, 124, 164, 123, 164, +- 164, 165, 122, 121, 165, 165, 165, 165, 166, 120, +- 166, 166, 167, 167, 167, 167, 167, 167, 167, 167, +- +- 168, 168, 168, 168, 168, 168, 168, 168, 169, 118, +- 169, 170, 117, 170, 170, 116, 170, 170, 171, 171, +- 171, 171, 171, 171, 171, 171, 172, 172, 172, 172, +- 172, 172, 172, 172, 115, 114, 112, 111, 109, 108, +- 107, 106, 105, 104, 103, 102, 101, 100, 98, 96, +- 95, 94, 93, 92, 90, 88, 86, 85, 84, 82, +- 81, 80, 79, 78, 77, 76, 74, 72, 69, 68, +- 66, 63, 61, 60, 56, 50, 49, 47, 46, 45, ++ 5, 5, 5, 8, 12, 12, 12, 14, 15, 16, ++ 8, 8, 8, 17, 20, 20, 17, 23, 42, 24, ++ 29, 162, 24, 29, 29, 29, 16, 14, 31, 44, ++ 29, 17, 134, 17, 134, 42, 17, 24, 17, 24, ++ 76, 17, 24, 76, 24, 15, 44, 24, 36, 23, ++ 26, 26, 26, 26, 34, 34, 34, 26, 161, 48, ++ 31, 32, 32, 32, 26, 26, 26, 26, 36, 48, ++ 32, 32, 32, 33, 33, 33, 60, 160, 74, 91, ++ 91, 66, 33, 33, 66, 66, 66, 114, 60, 60, ++ ++ 60, 66, 68, 68, 68, 74, 85, 99, 124, 133, ++ 102, 68, 68, 99, 102, 157, 156, 114, 85, 85, ++ 85, 133, 133, 133, 140, 140, 140, 148, 124, 143, ++ 143, 143, 152, 143, 147, 147, 147, 155, 147, 154, ++ 151, 150, 149, 146, 145, 144, 142, 148, 141, 138, ++ 137, 132, 152, 166, 166, 166, 166, 166, 166, 166, ++ 166, 167, 131, 130, 129, 167, 167, 168, 168, 168, ++ 168, 168, 168, 168, 168, 169, 169, 169, 169, 170, ++ 128, 170, 171, 127, 126, 171, 125, 171, 171, 172, ++ 123, 122, 172, 172, 172, 172, 173, 121, 173, 173, ++ ++ 174, 174, 174, 174, 174, 174, 174, 174, 175, 175, ++ 175, 175, 175, 175, 175, 175, 176, 120, 176, 177, ++ 119, 177, 177, 118, 177, 177, 178, 178, 178, 178, ++ 178, 178, 178, 178, 179, 179, 179, 179, 179, 179, ++ 179, 179, 116, 115, 113, 112, 111, 110, 109, 108, ++ 107, 106, 105, 104, 103, 101, 100, 98, 97, 96, ++ 95, 94, 92, 90, 88, 87, 86, 84, 83, 82, ++ 81, 80, 79, 78, 77, 75, 73, 70, 69, 67, ++ 64, 62, 61, 57, 51, 50, 49, 47, 46, 45, + 41, 38, 22, 21, 19, 13, 9, 6, 4, 2, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, + +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158 ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165 + } ; + + static yy_state_type yy_last_accepting_state; +@@ -662,7 +664,7 @@ static int dts_version = 1; + static void push_input_file(const char *filename); + static bool pop_input_file(void); + static void lexical_error(const char *fmt, ...); +-#line 666 "dtc-lexer.lex.c" ++#line 668 "dtc-lexer.lex.c" + + #define INITIAL 0 + #define BYTESTRING 1 +@@ -704,7 +706,7 @@ FILE *yyget_out (void ); + + void yyset_out (FILE * out_str ); + +-yy_size_t yyget_leng (void ); ++int yyget_leng (void ); + + char *yyget_text (void ); + +@@ -853,6 +855,10 @@ YY_DECL + register char *yy_cp, *yy_bp; + register int yy_act; + ++#line 68 "dtc-lexer.l" ++ ++#line 861 "dtc-lexer.lex.c" ++ + if ( !(yy_init) ) + { + (yy_init) = 1; +@@ -879,11 +885,6 @@ YY_DECL + yy_load_buffer_state( ); + } + +- { +-#line 68 "dtc-lexer.l" +- +-#line 886 "dtc-lexer.lex.c" +- + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); +@@ -901,7 +902,7 @@ YY_DECL + yy_match: + do + { +- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; ++ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; +@@ -910,13 +911,13 @@ yy_match: + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } +- while ( yy_current_state != 158 ); ++ while ( yy_current_state != 165 ); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + +@@ -951,39 +952,31 @@ case 2: + YY_RULE_SETUP + #line 75 "dtc-lexer.l" + { +- char *line, *fnstart, *fnend; +- struct data fn; ++ char *line, *tmp, *fn; + /* skip text before line # */ + line = yytext; + while (!isdigit((unsigned char)*line)) + line++; +- +- /* regexp ensures that first and list " +- * in the whole yytext are those at +- * beginning and end of the filename string */ +- fnstart = memchr(yytext, '"', yyleng); +- for (fnend = yytext + yyleng - 1; +- *fnend != '"'; fnend--) +- ; +- assert(fnstart && fnend && (fnend > fnstart)); +- +- fn = data_copy_escape_string(fnstart + 1, +- fnend - fnstart - 1); +- +- /* Don't allow nuls in filenames */ +- if (memchr(fn.val, '\0', fn.len - 1)) +- lexical_error("nul in line number directive"); +- ++ /* skip digits in line # */ ++ tmp = line; ++ while (!isspace((unsigned char)*tmp)) ++ tmp++; ++ /* "NULL"-terminate line # */ ++ *tmp = '\0'; ++ /* start of filename */ ++ fn = strchr(tmp + 1, '"') + 1; ++ /* strip trailing " from filename */ ++ tmp = strchr(fn, '"'); ++ *tmp = 0; + /* -1 since #line is the number of the next line */ +- srcpos_set_line(xstrdup(fn.val), atoi(line) - 1); +- data_free(fn); ++ srcpos_set_line(xstrdup(fn), atoi(line) - 1); + } + YY_BREAK + case YY_STATE_EOF(INITIAL): + case YY_STATE_EOF(BYTESTRING): + case YY_STATE_EOF(PROPNODENAME): + case YY_STATE_EOF(V1): +-#line 104 "dtc-lexer.l" ++#line 96 "dtc-lexer.l" + { + if (!pop_input_file()) { + yyterminate(); +@@ -993,7 +986,7 @@ case YY_STATE_EOF(V1): + case 3: + /* rule 3 can match eol */ + YY_RULE_SETUP +-#line 110 "dtc-lexer.l" ++#line 102 "dtc-lexer.l" + { + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, +@@ -1003,7 +996,7 @@ YY_RULE_SETUP + YY_BREAK + case 4: + YY_RULE_SETUP +-#line 117 "dtc-lexer.l" ++#line 109 "dtc-lexer.l" + { + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; +@@ -1013,25 +1006,33 @@ YY_RULE_SETUP + YY_BREAK + case 5: + YY_RULE_SETUP +-#line 124 "dtc-lexer.l" ++#line 116 "dtc-lexer.l" ++{ ++ DPRINT("Keyword: /plugin/\n"); ++ return DT_PLUGIN; ++ } ++ YY_BREAK ++case 6: ++YY_RULE_SETUP ++#line 121 "dtc-lexer.l" + { + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +-case 6: ++case 7: + YY_RULE_SETUP +-#line 130 "dtc-lexer.l" ++#line 127 "dtc-lexer.l" + { + DPRINT("Keyword: /bits/\n"); + BEGIN_DEFAULT(); + return DT_BITS; + } + YY_BREAK +-case 7: ++case 8: + YY_RULE_SETUP +-#line 136 "dtc-lexer.l" ++#line 133 "dtc-lexer.l" + { + DPRINT("Keyword: /delete-property/\n"); + DPRINT("\n"); +@@ -1039,9 +1040,9 @@ YY_RULE_SETUP + return DT_DEL_PROP; + } + YY_BREAK +-case 8: ++case 9: + YY_RULE_SETUP +-#line 143 "dtc-lexer.l" ++#line 140 "dtc-lexer.l" + { + DPRINT("Keyword: /delete-node/\n"); + DPRINT("\n"); +@@ -1049,9 +1050,9 @@ YY_RULE_SETUP + return DT_DEL_NODE; + } + YY_BREAK +-case 9: ++case 10: + YY_RULE_SETUP +-#line 150 "dtc-lexer.l" ++#line 147 "dtc-lexer.l" + { + DPRINT("Label: %s\n", yytext); + yylval.labelref = xstrdup(yytext); +@@ -1059,9 +1060,9 @@ YY_RULE_SETUP + return DT_LABEL; + } + YY_BREAK +-case 10: ++case 11: + YY_RULE_SETUP +-#line 157 "dtc-lexer.l" ++#line 154 "dtc-lexer.l" + { + char *e; + DPRINT("Integer Literal: '%s'\n", yytext); +@@ -1069,10 +1070,7 @@ YY_RULE_SETUP + errno = 0; + yylval.integer = strtoull(yytext, &e, 0); + +- if (*e && e[strspn(e, "UL")]) { +- lexical_error("Bad integer literal '%s'", +- yytext); +- } ++ assert(!(*e) || !e[strspn(e, "UL")]); + + if (errno == ERANGE) + lexical_error("Integer literal '%s' out of range", +@@ -1084,10 +1082,10 @@ YY_RULE_SETUP + return DT_LITERAL; + } + YY_BREAK +-case 11: +-/* rule 11 can match eol */ ++case 12: ++/* rule 12 can match eol */ + YY_RULE_SETUP +-#line 179 "dtc-lexer.l" ++#line 173 "dtc-lexer.l" + { + struct data d; + DPRINT("Character literal: %s\n", yytext); +@@ -1109,18 +1107,18 @@ YY_RULE_SETUP + return DT_CHAR_LITERAL; + } + YY_BREAK +-case 12: ++case 13: + YY_RULE_SETUP +-#line 200 "dtc-lexer.l" ++#line 194 "dtc-lexer.l" + { /* label reference */ + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = xstrdup(yytext+1); + return DT_REF; + } + YY_BREAK +-case 13: ++case 14: + YY_RULE_SETUP +-#line 206 "dtc-lexer.l" ++#line 200 "dtc-lexer.l" + { /* new-style path reference */ + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); +@@ -1128,27 +1126,27 @@ YY_RULE_SETUP + return DT_REF; + } + YY_BREAK +-case 14: ++case 15: + YY_RULE_SETUP +-#line 213 "dtc-lexer.l" ++#line 207 "dtc-lexer.l" + { + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +-case 15: ++case 16: + YY_RULE_SETUP +-#line 219 "dtc-lexer.l" ++#line 213 "dtc-lexer.l" + { + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +-case 16: ++case 17: + YY_RULE_SETUP +-#line 225 "dtc-lexer.l" ++#line 219 "dtc-lexer.l" + { + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = xstrdup((yytext[0] == '\\') ? +@@ -1157,75 +1155,75 @@ YY_RULE_SETUP + return DT_PROPNODENAME; + } + YY_BREAK +-case 17: ++case 18: + YY_RULE_SETUP +-#line 233 "dtc-lexer.l" ++#line 227 "dtc-lexer.l" + { + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + YY_BREAK +-case 18: +-/* rule 18 can match eol */ +-YY_RULE_SETUP +-#line 238 "dtc-lexer.l" +-/* eat whitespace */ +- YY_BREAK + case 19: + /* rule 19 can match eol */ + YY_RULE_SETUP +-#line 239 "dtc-lexer.l" +-/* eat C-style comments */ ++#line 232 "dtc-lexer.l" ++/* eat whitespace */ + YY_BREAK + case 20: + /* rule 20 can match eol */ + YY_RULE_SETUP +-#line 240 "dtc-lexer.l" +-/* eat C++-style comments */ ++#line 233 "dtc-lexer.l" ++/* eat C-style comments */ + YY_BREAK + case 21: ++/* rule 21 can match eol */ + YY_RULE_SETUP +-#line 242 "dtc-lexer.l" +-{ return DT_LSHIFT; }; ++#line 234 "dtc-lexer.l" ++/* eat C++-style comments */ + YY_BREAK + case 22: + YY_RULE_SETUP +-#line 243 "dtc-lexer.l" +-{ return DT_RSHIFT; }; ++#line 236 "dtc-lexer.l" ++{ return DT_LSHIFT; }; + YY_BREAK + case 23: + YY_RULE_SETUP +-#line 244 "dtc-lexer.l" +-{ return DT_LE; }; ++#line 237 "dtc-lexer.l" ++{ return DT_RSHIFT; }; + YY_BREAK + case 24: + YY_RULE_SETUP +-#line 245 "dtc-lexer.l" +-{ return DT_GE; }; ++#line 238 "dtc-lexer.l" ++{ return DT_LE; }; + YY_BREAK + case 25: + YY_RULE_SETUP +-#line 246 "dtc-lexer.l" +-{ return DT_EQ; }; ++#line 239 "dtc-lexer.l" ++{ return DT_GE; }; + YY_BREAK + case 26: + YY_RULE_SETUP +-#line 247 "dtc-lexer.l" +-{ return DT_NE; }; ++#line 240 "dtc-lexer.l" ++{ return DT_EQ; }; + YY_BREAK + case 27: + YY_RULE_SETUP +-#line 248 "dtc-lexer.l" +-{ return DT_AND; }; ++#line 241 "dtc-lexer.l" ++{ return DT_NE; }; + YY_BREAK + case 28: + YY_RULE_SETUP +-#line 249 "dtc-lexer.l" +-{ return DT_OR; }; ++#line 242 "dtc-lexer.l" ++{ return DT_AND; }; + YY_BREAK + case 29: + YY_RULE_SETUP +-#line 251 "dtc-lexer.l" ++#line 243 "dtc-lexer.l" ++{ return DT_OR; }; ++ YY_BREAK ++case 30: ++YY_RULE_SETUP ++#line 245 "dtc-lexer.l" + { + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); +@@ -1241,12 +1239,12 @@ YY_RULE_SETUP + return yytext[0]; + } + YY_BREAK +-case 30: ++case 31: + YY_RULE_SETUP +-#line 266 "dtc-lexer.l" ++#line 260 "dtc-lexer.l" + ECHO; + YY_BREAK +-#line 1250 "dtc-lexer.lex.c" ++#line 1248 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { +@@ -1376,7 +1374,6 @@ ECHO; + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +- } /* end of user's declarations */ + } /* end of yylex */ + + /* yy_get_next_buffer - try to read in a new buffer +@@ -1432,21 +1429,21 @@ static int yy_get_next_buffer (void) + + else + { +- yy_size_t num_to_read = ++ int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ +- YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE; ++ YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { +- yy_size_t new_size = b->yy_buf_size * 2; ++ int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; +@@ -1477,7 +1474,7 @@ static int yy_get_next_buffer (void) + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), +- (yy_n_chars), num_to_read ); ++ (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } +@@ -1539,7 +1536,7 @@ static int yy_get_next_buffer (void) + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; +@@ -1567,13 +1564,13 @@ static int yy_get_next_buffer (void) + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; +- yy_is_jam = (yy_current_state == 158); ++ yy_is_jam = (yy_current_state == 165); + +- return yy_is_jam ? 0 : yy_current_state; ++ return yy_is_jam ? 0 : yy_current_state; + } + + #ifndef YY_NO_INPUT +@@ -1600,7 +1597,7 @@ static int yy_get_next_buffer (void) + + else + { /* need more input */ +- yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); ++ int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) +@@ -1874,7 +1871,7 @@ void yypop_buffer_state (void) + */ + static void yyensure_buffer_stack (void) + { +- yy_size_t num_to_alloc; ++ int num_to_alloc; + + if (!(yy_buffer_stack)) { + +@@ -1971,12 +1968,12 @@ YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) + * + * @return the newly allocated buffer state object. + */ +-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) ++YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) + { + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; +- yy_size_t i; ++ int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; +@@ -2058,7 +2055,7 @@ FILE *yyget_out (void) + /** Get the length of the current token. + * + */ +-yy_size_t yyget_leng (void) ++int yyget_leng (void) + { + return yyleng; + } +@@ -2206,7 +2203,7 @@ void yyfree (void * ptr ) + + #define YYTABLES_NAME "yytables" + +-#line 265 "dtc-lexer.l" ++#line 260 "dtc-lexer.l" + + + +diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped +index 31cec50a1265..844c4628962d 100644 +--- a/scripts/dtc/dtc-parser.tab.c_shipped ++++ b/scripts/dtc/dtc-parser.tab.c_shipped +@@ -65,6 +65,7 @@ + #line 20 "dtc-parser.y" /* yacc.c:339 */ + + #include ++#include + + #include "dtc.h" + #include "srcpos.h" +@@ -80,7 +81,7 @@ extern void yyerror(char const *s); + extern struct boot_info *the_boot_info; + extern bool treesource_error; + +-#line 84 "dtc-parser.tab.c" /* yacc.c:339 */ ++#line 85 "dtc-parser.tab.c" /* yacc.c:339 */ + + # ifndef YY_NULLPTR + # if defined __cplusplus && 201103L <= __cplusplus +@@ -116,26 +117,27 @@ extern int yydebug; + enum yytokentype + { + DT_V1 = 258, +- DT_MEMRESERVE = 259, +- DT_LSHIFT = 260, +- DT_RSHIFT = 261, +- DT_LE = 262, +- DT_GE = 263, +- DT_EQ = 264, +- DT_NE = 265, +- DT_AND = 266, +- DT_OR = 267, +- DT_BITS = 268, +- DT_DEL_PROP = 269, +- DT_DEL_NODE = 270, +- DT_PROPNODENAME = 271, +- DT_LITERAL = 272, +- DT_CHAR_LITERAL = 273, +- DT_BYTE = 274, +- DT_STRING = 275, +- DT_LABEL = 276, +- DT_REF = 277, +- DT_INCBIN = 278 ++ DT_PLUGIN = 259, ++ DT_MEMRESERVE = 260, ++ DT_LSHIFT = 261, ++ DT_RSHIFT = 262, ++ DT_LE = 263, ++ DT_GE = 264, ++ DT_EQ = 265, ++ DT_NE = 266, ++ DT_AND = 267, ++ DT_OR = 268, ++ DT_BITS = 269, ++ DT_DEL_PROP = 270, ++ DT_DEL_NODE = 271, ++ DT_PROPNODENAME = 272, ++ DT_LITERAL = 273, ++ DT_CHAR_LITERAL = 274, ++ DT_BYTE = 275, ++ DT_STRING = 276, ++ DT_LABEL = 277, ++ DT_REF = 278, ++ DT_INCBIN = 279 + }; + #endif + +@@ -144,7 +146,7 @@ extern int yydebug; + typedef union YYSTYPE YYSTYPE; + union YYSTYPE + { +-#line 38 "dtc-parser.y" /* yacc.c:355 */ ++#line 39 "dtc-parser.y" /* yacc.c:355 */ + + char *propnodename; + char *labelref; +@@ -162,8 +164,9 @@ union YYSTYPE + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + +-#line 167 "dtc-parser.tab.c" /* yacc.c:355 */ ++#line 170 "dtc-parser.tab.c" /* yacc.c:355 */ + }; + # define YYSTYPE_IS_TRIVIAL 1 + # define YYSTYPE_IS_DECLARED 1 +@@ -192,7 +195,7 @@ int yyparse (void); + + /* Copy the second part of user declarations. */ + +-#line 196 "dtc-parser.tab.c" /* yacc.c:358 */ ++#line 199 "dtc-parser.tab.c" /* yacc.c:358 */ + + #ifdef short + # undef short +@@ -439,18 +442,18 @@ union yyalloc + #define YYLAST 136 + + /* YYNTOKENS -- Number of terminals. */ +-#define YYNTOKENS 47 ++#define YYNTOKENS 48 + /* YYNNTS -- Number of nonterminals. */ +-#define YYNNTS 28 ++#define YYNNTS 29 + /* YYNRULES -- Number of rules. */ +-#define YYNRULES 80 ++#define YYNRULES 82 + /* YYNSTATES -- Number of states. */ +-#define YYNSTATES 144 ++#define YYNSTATES 147 + + /* YYTRANSLATE[YYX] -- Symbol number corresponding to YYX as returned + by yylex, with out-of-bounds checking. */ + #define YYUNDEFTOK 2 +-#define YYMAXUTOK 278 ++#define YYMAXUTOK 279 + + #define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) +@@ -462,16 +465,16 @@ static const yytype_uint8 yytranslate[] = + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 2, 2, 46, 2, 2, 2, 44, 40, 2, +- 32, 34, 43, 41, 33, 42, 2, 25, 2, 2, +- 2, 2, 2, 2, 2, 2, 2, 2, 37, 24, +- 35, 28, 29, 36, 2, 2, 2, 2, 2, 2, ++ 2, 2, 2, 47, 2, 2, 2, 45, 41, 2, ++ 33, 35, 44, 42, 34, 43, 2, 26, 2, 2, ++ 2, 2, 2, 2, 2, 2, 2, 2, 38, 25, ++ 36, 29, 30, 37, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 30, 2, 31, 39, 2, 2, 2, 2, 2, ++ 2, 31, 2, 32, 40, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 2, 2, 26, 38, 27, 45, 2, 2, 2, ++ 2, 2, 2, 27, 39, 28, 46, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +@@ -486,22 +489,22 @@ static const yytype_uint8 yytranslate[] = + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, +- 15, 16, 17, 18, 19, 20, 21, 22, 23 ++ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 + }; + + #if YYDEBUG + /* YYRLINE[YYN] -- Source line where rule number YYN was defined. */ + static const yytype_uint16 yyrline[] = + { +- 0, 104, 104, 113, 116, 123, 127, 135, 139, 144, +- 155, 165, 180, 188, 191, 198, 202, 206, 210, 218, +- 222, 226, 230, 234, 250, 260, 268, 271, 275, 282, +- 298, 303, 322, 336, 343, 344, 345, 352, 356, 357, +- 361, 362, 366, 367, 371, 372, 376, 377, 381, 382, +- 386, 387, 388, 392, 393, 394, 395, 396, 400, 401, +- 402, 406, 407, 408, 412, 413, 422, 431, 435, 436, +- 437, 438, 443, 446, 450, 458, 461, 465, 473, 477, +- 481 ++ 0, 108, 108, 118, 121, 129, 132, 139, 143, 151, ++ 155, 160, 171, 181, 196, 204, 207, 214, 218, 222, ++ 226, 234, 238, 242, 246, 250, 266, 276, 284, 287, ++ 291, 298, 314, 319, 338, 352, 359, 360, 361, 368, ++ 372, 373, 377, 378, 382, 383, 387, 388, 392, 393, ++ 397, 398, 402, 403, 404, 408, 409, 410, 411, 412, ++ 416, 417, 418, 422, 423, 424, 428, 429, 430, 431, ++ 435, 436, 437, 438, 443, 446, 450, 458, 461, 465, ++ 473, 477, 481 + }; + #endif + +@@ -510,19 +513,19 @@ static const yytype_uint16 yyrline[] = + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ + static const char *const yytname[] = + { +- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", "DT_LSHIFT", +- "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", "DT_OR", +- "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", "DT_LITERAL", +- "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", +- "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", "']'", +- "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", "'+'", +- "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", +- "memreserves", "memreserve", "devicetree", "nodedef", "proplist", +- "propdef", "propdata", "propdataprefix", "arrayprefix", "integer_prim", +- "integer_expr", "integer_trinary", "integer_or", "integer_and", +- "integer_bitor", "integer_bitxor", "integer_bitand", "integer_eq", +- "integer_rela", "integer_shift", "integer_add", "integer_mul", +- "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR ++ "$end", "error", "$undefined", "DT_V1", "DT_PLUGIN", "DT_MEMRESERVE", ++ "DT_LSHIFT", "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", ++ "DT_OR", "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", ++ "DT_LITERAL", "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", ++ "DT_REF", "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", ++ "']'", "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", ++ "'+'", "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", ++ "plugindecl", "memreserves", "memreserve", "devicetree", "nodedef", ++ "proplist", "propdef", "propdata", "propdataprefix", "arrayprefix", ++ "integer_prim", "integer_expr", "integer_trinary", "integer_or", ++ "integer_and", "integer_bitor", "integer_bitxor", "integer_bitand", ++ "integer_eq", "integer_rela", "integer_shift", "integer_add", ++ "integer_mul", "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR + }; + #endif + +@@ -533,16 +536,16 @@ static const yytype_uint16 yytoknum[] = + { + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, +- 275, 276, 277, 278, 59, 47, 123, 125, 61, 62, +- 91, 93, 40, 44, 41, 60, 63, 58, 124, 94, +- 38, 43, 45, 42, 37, 126, 33 ++ 275, 276, 277, 278, 279, 59, 47, 123, 125, 61, ++ 62, 91, 93, 40, 44, 41, 60, 63, 58, 124, ++ 94, 38, 43, 45, 42, 37, 126, 33 + }; + # endif + +-#define YYPACT_NINF -81 ++#define YYPACT_NINF -84 + + #define yypact_value_is_default(Yystate) \ +- (!!((Yystate) == (-81))) ++ (!!((Yystate) == (-84))) + + #define YYTABLE_NINF -1 + +@@ -553,21 +556,21 @@ static const yytype_uint16 yytoknum[] = + STATE-NUM. */ + static const yytype_int8 yypact[] = + { +- 16, -11, 21, 10, -81, 25, 10, 19, 10, -81, +- -81, -9, 25, -81, 2, 51, -81, -9, -9, -9, +- -81, 1, -81, -6, 50, 14, 28, 29, 36, 3, +- 58, 44, -3, -81, 47, -81, -81, 65, 68, 2, +- 2, -81, -81, -81, -81, -9, -9, -9, -9, -9, +- -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, +- -9, -9, -9, -9, -81, 63, 69, 2, -81, -81, +- 50, 57, 14, 28, 29, 36, 3, 3, 58, 58, +- 58, 58, 44, 44, -3, -3, -81, -81, -81, 79, +- 80, -8, 63, -81, 72, 63, -81, -81, -9, 76, +- 77, -81, -81, -81, -81, -81, 78, -81, -81, -81, +- -81, -81, 35, 4, -81, -81, -81, -81, 86, -81, +- -81, -81, 73, -81, -81, 33, 71, 84, 39, -81, +- -81, -81, -81, -81, 41, -81, -81, -81, 25, -81, +- 74, 25, 75, -81 ++ 15, -12, 35, 42, -84, 27, 9, -84, 24, 9, ++ 43, 9, -84, -84, -10, 24, -84, 60, 44, -84, ++ -10, -10, -10, -84, 55, -84, -7, 52, 53, 51, ++ 54, 10, 2, 38, 37, -4, -84, 68, -84, -84, ++ 71, 73, 60, 60, -84, -84, -84, -84, -10, -10, ++ -10, -10, -10, -10, -10, -10, -10, -10, -10, -10, ++ -10, -10, -10, -10, -10, -10, -10, -84, 56, 72, ++ 60, -84, -84, 52, 61, 53, 51, 54, 10, 2, ++ 2, 38, 38, 38, 38, 37, 37, -4, -4, -84, ++ -84, -84, 81, 83, 34, 56, -84, 74, 56, -84, ++ -84, -10, 76, 78, -84, -84, -84, -84, -84, 79, ++ -84, -84, -84, -84, -84, -6, 3, -84, -84, -84, ++ -84, 87, -84, -84, -84, 75, -84, -84, 32, 70, ++ 86, 36, -84, -84, -84, -84, -84, 47, -84, -84, ++ -84, 24, -84, 77, 24, 80, -84 + }; + + /* YYDEFACT[STATE-NUM] -- Default reduction number in state STATE-NUM. +@@ -575,37 +578,37 @@ static const yytype_int8 yypact[] = + means the default is an error. */ + static const yytype_uint8 yydefact[] = + { +- 0, 0, 0, 3, 1, 0, 0, 0, 3, 34, +- 35, 0, 0, 6, 0, 2, 4, 0, 0, 0, +- 68, 0, 37, 38, 40, 42, 44, 46, 48, 50, +- 53, 60, 63, 67, 0, 13, 7, 0, 0, 0, +- 0, 69, 70, 71, 36, 0, 0, 0, 0, 0, ++ 0, 0, 0, 3, 1, 0, 5, 4, 0, 0, ++ 0, 5, 36, 37, 0, 0, 8, 0, 2, 6, ++ 0, 0, 0, 70, 0, 39, 40, 42, 44, 46, ++ 48, 50, 52, 55, 62, 65, 69, 0, 15, 9, ++ 0, 0, 0, 0, 71, 72, 73, 38, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +- 0, 0, 0, 0, 5, 75, 0, 0, 10, 8, +- 41, 0, 43, 45, 47, 49, 51, 52, 56, 57, +- 55, 54, 58, 59, 61, 62, 65, 64, 66, 0, +- 0, 0, 0, 14, 0, 75, 11, 9, 0, 0, +- 0, 16, 26, 78, 18, 80, 0, 77, 76, 39, +- 17, 79, 0, 0, 12, 25, 15, 27, 0, 19, +- 28, 22, 0, 72, 30, 0, 0, 0, 0, 33, +- 32, 20, 31, 29, 0, 73, 74, 21, 0, 24, +- 0, 0, 0, 23 ++ 0, 0, 0, 0, 0, 0, 0, 7, 77, 0, ++ 0, 12, 10, 43, 0, 45, 47, 49, 51, 53, ++ 54, 58, 59, 57, 56, 60, 61, 63, 64, 67, ++ 66, 68, 0, 0, 0, 0, 16, 0, 77, 13, ++ 11, 0, 0, 0, 18, 28, 80, 20, 82, 0, ++ 79, 78, 41, 19, 81, 0, 0, 14, 27, 17, ++ 29, 0, 21, 30, 24, 0, 74, 32, 0, 0, ++ 0, 0, 35, 34, 22, 33, 31, 0, 75, 76, ++ 23, 0, 26, 0, 0, 0, 25 + }; + + /* YYPGOTO[NTERM-NUM]. */ + static const yytype_int8 yypgoto[] = + { +- -81, -81, 100, 104, -81, -38, -81, -80, -81, -81, +- -81, -5, 66, 13, -81, 70, 67, 81, 64, 82, +- 37, 27, 34, 38, -14, -81, 22, 24 ++ -84, -84, -84, 98, 101, -84, -41, -84, -83, -84, ++ -84, -84, -8, 63, 12, -84, 66, 67, 65, 69, ++ 82, 29, 18, 25, 26, -17, -84, 20, 28 + }; + + /* YYDEFGOTO[NTERM-NUM]. */ + static const yytype_int16 yydefgoto[] = + { +- -1, 2, 7, 8, 15, 36, 65, 93, 112, 113, +- 125, 20, 21, 22, 23, 24, 25, 26, 27, 28, +- 29, 30, 31, 32, 33, 128, 94, 95 ++ -1, 2, 6, 10, 11, 18, 39, 68, 96, 115, ++ 116, 128, 23, 24, 25, 26, 27, 28, 29, 30, ++ 31, 32, 33, 34, 35, 36, 131, 97, 98 + }; + + /* YYTABLE[YYPACT[STATE-NUM]] -- What to do in state STATE-NUM. If +@@ -613,87 +616,87 @@ static const yytype_int16 yydefgoto[] = + number is the opposite. If YYTABLE_NINF, syntax error. */ + static const yytype_uint8 yytable[] = + { +- 12, 68, 69, 41, 42, 43, 45, 34, 9, 10, +- 53, 54, 104, 3, 5, 107, 101, 118, 35, 1, +- 102, 4, 61, 11, 119, 120, 121, 122, 35, 97, +- 46, 6, 55, 17, 123, 44, 18, 19, 56, 124, +- 62, 63, 9, 10, 14, 51, 52, 86, 87, 88, +- 9, 10, 48, 103, 129, 130, 115, 11, 135, 116, +- 136, 47, 131, 57, 58, 11, 37, 49, 117, 50, +- 137, 64, 38, 39, 138, 139, 40, 89, 90, 91, +- 78, 79, 80, 81, 92, 59, 60, 66, 76, 77, +- 67, 82, 83, 96, 98, 99, 100, 84, 85, 106, +- 110, 111, 114, 126, 134, 127, 133, 141, 16, 143, +- 13, 109, 71, 74, 72, 70, 105, 108, 0, 0, +- 132, 0, 0, 0, 0, 0, 0, 0, 0, 73, +- 0, 0, 75, 140, 0, 0, 142 ++ 15, 71, 72, 44, 45, 46, 48, 37, 12, 13, ++ 56, 57, 107, 3, 8, 110, 118, 121, 1, 119, ++ 54, 55, 64, 14, 122, 123, 124, 125, 120, 100, ++ 49, 9, 58, 20, 126, 4, 21, 22, 59, 127, ++ 65, 66, 12, 13, 60, 61, 5, 89, 90, 91, ++ 12, 13, 7, 106, 132, 133, 138, 14, 139, 104, ++ 40, 38, 134, 105, 50, 14, 41, 42, 140, 17, ++ 43, 92, 93, 94, 81, 82, 83, 84, 95, 62, ++ 63, 141, 142, 79, 80, 85, 86, 38, 87, 88, ++ 47, 52, 51, 67, 69, 53, 70, 99, 102, 101, ++ 103, 113, 109, 114, 117, 129, 136, 137, 130, 19, ++ 16, 144, 74, 112, 73, 146, 76, 75, 111, 0, ++ 135, 77, 0, 108, 0, 0, 0, 0, 0, 0, ++ 0, 0, 0, 143, 0, 78, 145 + }; + + static const yytype_int16 yycheck[] = + { +- 5, 39, 40, 17, 18, 19, 12, 12, 17, 18, +- 7, 8, 92, 24, 4, 95, 24, 13, 26, 3, +- 28, 0, 25, 32, 20, 21, 22, 23, 26, 67, +- 36, 21, 29, 42, 30, 34, 45, 46, 35, 35, +- 43, 44, 17, 18, 25, 9, 10, 61, 62, 63, +- 17, 18, 38, 91, 21, 22, 21, 32, 19, 24, +- 21, 11, 29, 5, 6, 32, 15, 39, 33, 40, +- 31, 24, 21, 22, 33, 34, 25, 14, 15, 16, +- 53, 54, 55, 56, 21, 41, 42, 22, 51, 52, +- 22, 57, 58, 24, 37, 16, 16, 59, 60, 27, +- 24, 24, 24, 17, 20, 32, 35, 33, 8, 34, +- 6, 98, 46, 49, 47, 45, 92, 95, -1, -1, +- 125, -1, -1, -1, -1, -1, -1, -1, -1, 48, +- -1, -1, 50, 138, -1, -1, 141 ++ 8, 42, 43, 20, 21, 22, 13, 15, 18, 19, ++ 8, 9, 95, 25, 5, 98, 22, 14, 3, 25, ++ 10, 11, 26, 33, 21, 22, 23, 24, 34, 70, ++ 37, 22, 30, 43, 31, 0, 46, 47, 36, 36, ++ 44, 45, 18, 19, 6, 7, 4, 64, 65, 66, ++ 18, 19, 25, 94, 22, 23, 20, 33, 22, 25, ++ 16, 27, 30, 29, 12, 33, 22, 23, 32, 26, ++ 26, 15, 16, 17, 56, 57, 58, 59, 22, 42, ++ 43, 34, 35, 54, 55, 60, 61, 27, 62, 63, ++ 35, 40, 39, 25, 23, 41, 23, 25, 17, 38, ++ 17, 25, 28, 25, 25, 18, 36, 21, 33, 11, ++ 9, 34, 49, 101, 48, 35, 51, 50, 98, -1, ++ 128, 52, -1, 95, -1, -1, -1, -1, -1, -1, ++ -1, -1, -1, 141, -1, 53, 144 + }; + + /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ + static const yytype_uint8 yystos[] = + { +- 0, 3, 48, 24, 0, 4, 21, 49, 50, 17, +- 18, 32, 58, 50, 25, 51, 49, 42, 45, 46, +- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, +- 68, 69, 70, 71, 58, 26, 52, 15, 21, 22, +- 25, 71, 71, 71, 34, 12, 36, 11, 38, 39, +- 40, 9, 10, 7, 8, 29, 35, 5, 6, 41, +- 42, 25, 43, 44, 24, 53, 22, 22, 52, 52, +- 62, 59, 63, 64, 65, 66, 67, 67, 68, 68, +- 68, 68, 69, 69, 70, 70, 71, 71, 71, 14, +- 15, 16, 21, 54, 73, 74, 24, 52, 37, 16, +- 16, 24, 28, 52, 54, 74, 27, 54, 73, 60, +- 24, 24, 55, 56, 24, 21, 24, 33, 13, 20, +- 21, 22, 23, 30, 35, 57, 17, 32, 72, 21, +- 22, 29, 58, 35, 20, 19, 21, 31, 33, 34, +- 58, 33, 58, 34 ++ 0, 3, 49, 25, 0, 4, 50, 25, 5, 22, ++ 51, 52, 18, 19, 33, 60, 52, 26, 53, 51, ++ 43, 46, 47, 60, 61, 62, 63, 64, 65, 66, ++ 67, 68, 69, 70, 71, 72, 73, 60, 27, 54, ++ 16, 22, 23, 26, 73, 73, 73, 35, 13, 37, ++ 12, 39, 40, 41, 10, 11, 8, 9, 30, 36, ++ 6, 7, 42, 43, 26, 44, 45, 25, 55, 23, ++ 23, 54, 54, 64, 61, 65, 66, 67, 68, 69, ++ 69, 70, 70, 70, 70, 71, 71, 72, 72, 73, ++ 73, 73, 15, 16, 17, 22, 56, 75, 76, 25, ++ 54, 38, 17, 17, 25, 29, 54, 56, 76, 28, ++ 56, 75, 62, 25, 25, 57, 58, 25, 22, 25, ++ 34, 14, 21, 22, 23, 24, 31, 36, 59, 18, ++ 33, 74, 22, 23, 30, 60, 36, 21, 20, 22, ++ 32, 34, 35, 60, 34, 60, 35 + }; + + /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ + static const yytype_uint8 yyr1[] = + { +- 0, 47, 48, 49, 49, 50, 50, 51, 51, 51, +- 51, 51, 52, 53, 53, 54, 54, 54, 54, 55, +- 55, 55, 55, 55, 55, 55, 56, 56, 56, 57, +- 57, 57, 57, 57, 58, 58, 58, 59, 60, 60, +- 61, 61, 62, 62, 63, 63, 64, 64, 65, 65, +- 66, 66, 66, 67, 67, 67, 67, 67, 68, 68, +- 68, 69, 69, 69, 70, 70, 70, 70, 71, 71, +- 71, 71, 72, 72, 72, 73, 73, 73, 74, 74, +- 74 ++ 0, 48, 49, 50, 50, 51, 51, 52, 52, 53, ++ 53, 53, 53, 53, 54, 55, 55, 56, 56, 56, ++ 56, 57, 57, 57, 57, 57, 57, 57, 58, 58, ++ 58, 59, 59, 59, 59, 59, 60, 60, 60, 61, ++ 62, 62, 63, 63, 64, 64, 65, 65, 66, 66, ++ 67, 67, 68, 68, 68, 69, 69, 69, 69, 69, ++ 70, 70, 70, 71, 71, 71, 72, 72, 72, 72, ++ 73, 73, 73, 73, 74, 74, 74, 75, 75, 75, ++ 76, 76, 76 + }; + + /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN. */ + static const yytype_uint8 yyr2[] = + { +- 0, 2, 4, 0, 2, 4, 2, 2, 3, 4, +- 3, 4, 5, 0, 2, 4, 2, 3, 2, 2, +- 3, 4, 2, 9, 5, 2, 0, 2, 2, 3, +- 1, 2, 2, 2, 1, 1, 3, 1, 1, 5, +- 1, 3, 1, 3, 1, 3, 1, 3, 1, 3, +- 1, 3, 3, 1, 3, 3, 3, 3, 3, 3, +- 1, 3, 3, 1, 3, 3, 3, 1, 1, 2, +- 2, 2, 0, 2, 2, 0, 2, 2, 2, 3, +- 2 ++ 0, 2, 5, 0, 2, 0, 2, 4, 2, 2, ++ 3, 4, 3, 4, 5, 0, 2, 4, 2, 3, ++ 2, 2, 3, 4, 2, 9, 5, 2, 0, 2, ++ 2, 3, 1, 2, 2, 2, 1, 1, 3, 1, ++ 1, 5, 1, 3, 1, 3, 1, 3, 1, 3, ++ 1, 3, 1, 3, 3, 1, 3, 3, 3, 3, ++ 3, 3, 1, 3, 3, 1, 3, 3, 3, 1, ++ 1, 2, 2, 2, 0, 2, 2, 0, 2, 2, ++ 2, 3, 2 + }; + + +@@ -1463,65 +1466,82 @@ yyreduce: + switch (yyn) + { + case 2: +-#line 105 "dtc-parser.y" /* yacc.c:1646 */ ++#line 109 "dtc-parser.y" /* yacc.c:1646 */ + { ++ (yyvsp[0].node)->is_plugin = (yyvsp[-2].is_plugin); + the_boot_info = build_boot_info((yyvsp[-1].re), (yyvsp[0].node), + guess_boot_cpuid((yyvsp[0].node))); + } +-#line 1472 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1476 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 3: +-#line 113 "dtc-parser.y" /* yacc.c:1646 */ ++#line 118 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = NULL; ++ (yyval.is_plugin) = false; + } +-#line 1480 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1484 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 4: +-#line 117 "dtc-parser.y" /* yacc.c:1646 */ ++#line 122 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); ++ (yyval.is_plugin) = true; + } +-#line 1488 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1492 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 5: +-#line 124 "dtc-parser.y" /* yacc.c:1646 */ ++#line 129 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); ++ (yyval.re) = NULL; + } +-#line 1496 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1500 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 6: +-#line 128 "dtc-parser.y" /* yacc.c:1646 */ ++#line 133 "dtc-parser.y" /* yacc.c:1646 */ ++ { ++ (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); ++ } ++#line 1508 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ break; ++ ++ case 7: ++#line 140 "dtc-parser.y" /* yacc.c:1646 */ ++ { ++ (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); ++ } ++#line 1516 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ break; ++ ++ case 8: ++#line 144 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].re)->labels, (yyvsp[-1].labelref)); + (yyval.re) = (yyvsp[0].re); + } +-#line 1505 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1525 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 7: +-#line 136 "dtc-parser.y" /* yacc.c:1646 */ ++ case 9: ++#line 152 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node((yyvsp[0].node), ""); + } +-#line 1513 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1533 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 8: +-#line 140 "dtc-parser.y" /* yacc.c:1646 */ ++ case 10: ++#line 156 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = merge_nodes((yyvsp[-2].node), (yyvsp[0].node)); + } +-#line 1521 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1541 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 9: +-#line 145 "dtc-parser.y" /* yacc.c:1646 */ ++ case 11: ++#line 161 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + +@@ -1532,11 +1552,11 @@ yyreduce: + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-3].node); + } +-#line 1536 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1556 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 10: +-#line 156 "dtc-parser.y" /* yacc.c:1646 */ ++ case 12: ++#line 172 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref)); + +@@ -1546,11 +1566,11 @@ yyreduce: + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-2].node); + } +-#line 1550 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1570 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 11: +-#line 166 "dtc-parser.y" /* yacc.c:1646 */ ++ case 13: ++#line 182 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + +@@ -1562,100 +1582,100 @@ yyreduce: + + (yyval.node) = (yyvsp[-3].node); + } +-#line 1566 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1586 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 12: +-#line 181 "dtc-parser.y" /* yacc.c:1646 */ ++ case 14: ++#line 197 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist)); + } +-#line 1574 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1594 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 13: +-#line 188 "dtc-parser.y" /* yacc.c:1646 */ ++ case 15: ++#line 204 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.proplist) = NULL; + } +-#line 1582 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1602 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 14: +-#line 192 "dtc-parser.y" /* yacc.c:1646 */ ++ case 16: ++#line 208 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist)); + } +-#line 1590 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1610 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 15: +-#line 199 "dtc-parser.y" /* yacc.c:1646 */ ++ case 17: ++#line 215 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data)); + } +-#line 1598 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1618 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 16: +-#line 203 "dtc-parser.y" /* yacc.c:1646 */ ++ case 18: ++#line 219 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data); + } +-#line 1606 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1626 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 17: +-#line 207 "dtc-parser.y" /* yacc.c:1646 */ ++ case 19: ++#line 223 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property_delete((yyvsp[-1].propnodename)); + } +-#line 1614 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1634 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 18: +-#line 211 "dtc-parser.y" /* yacc.c:1646 */ ++ case 20: ++#line 227 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref)); + (yyval.prop) = (yyvsp[0].prop); + } +-#line 1623 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1643 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 19: +-#line 219 "dtc-parser.y" /* yacc.c:1646 */ ++ case 21: ++#line 235 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data)); + } +-#line 1631 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1651 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 20: +-#line 223 "dtc-parser.y" /* yacc.c:1646 */ ++ case 22: ++#line 239 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data); + } +-#line 1639 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1659 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 21: +-#line 227 "dtc-parser.y" /* yacc.c:1646 */ ++ case 23: ++#line 243 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data)); + } +-#line 1647 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1667 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 22: +-#line 231 "dtc-parser.y" /* yacc.c:1646 */ ++ case 24: ++#line 247 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref)); + } +-#line 1655 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 23: +-#line 235 "dtc-parser.y" /* yacc.c:1646 */ ++ case 25: ++#line 251 "dtc-parser.y" /* yacc.c:1646 */ + { + FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL); + struct data d; +@@ -1671,11 +1691,11 @@ yyreduce: + (yyval.data) = data_merge((yyvsp[-8].data), d); + fclose(f); + } +-#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1695 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 24: +-#line 251 "dtc-parser.y" /* yacc.c:1646 */ ++ case 26: ++#line 267 "dtc-parser.y" /* yacc.c:1646 */ + { + FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL); + struct data d = empty_data; +@@ -1685,43 +1705,43 @@ yyreduce: + (yyval.data) = data_merge((yyvsp[-4].data), d); + fclose(f); + } +-#line 1689 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1709 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 25: +-#line 261 "dtc-parser.y" /* yacc.c:1646 */ ++ case 27: ++#line 277 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1697 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1717 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 26: +-#line 268 "dtc-parser.y" /* yacc.c:1646 */ ++ case 28: ++#line 284 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = empty_data; + } +-#line 1705 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1725 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 27: +-#line 272 "dtc-parser.y" /* yacc.c:1646 */ ++ case 29: ++#line 288 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = (yyvsp[-1].data); + } +-#line 1713 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1733 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 28: +-#line 276 "dtc-parser.y" /* yacc.c:1646 */ ++ case 30: ++#line 292 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1721 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 29: +-#line 283 "dtc-parser.y" /* yacc.c:1646 */ ++ case 31: ++#line 299 "dtc-parser.y" /* yacc.c:1646 */ + { + unsigned long long bits; + +@@ -1737,20 +1757,20 @@ yyreduce: + (yyval.array).data = empty_data; + (yyval.array).bits = bits; + } +-#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1761 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 30: +-#line 299 "dtc-parser.y" /* yacc.c:1646 */ ++ case 32: ++#line 315 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.array).data = empty_data; + (yyval.array).bits = 32; + } +-#line 1750 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1770 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 31: +-#line 304 "dtc-parser.y" /* yacc.c:1646 */ ++ case 33: ++#line 320 "dtc-parser.y" /* yacc.c:1646 */ + { + if ((yyvsp[-1].array).bits < 64) { + uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1; +@@ -1769,11 +1789,11 @@ yyreduce: + + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits); + } +-#line 1773 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1793 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 32: +-#line 323 "dtc-parser.y" /* yacc.c:1646 */ ++ case 34: ++#line 339 "dtc-parser.y" /* yacc.c:1646 */ + { + uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits); + +@@ -1787,247 +1807,233 @@ yyreduce: + + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits); + } +-#line 1791 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1811 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 33: +-#line 337 "dtc-parser.y" /* yacc.c:1646 */ ++ case 35: ++#line 353 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref)); + } +-#line 1799 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 36: +-#line 346 "dtc-parser.y" /* yacc.c:1646 */ ++ case 38: ++#line 362 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.integer) = (yyvsp[-1].integer); + } +-#line 1807 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1827 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 39: +-#line 357 "dtc-parser.y" /* yacc.c:1646 */ ++ case 41: ++#line 373 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); } +-#line 1813 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1833 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 41: +-#line 362 "dtc-parser.y" /* yacc.c:1646 */ ++ case 43: ++#line 378 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); } +-#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1839 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 43: +-#line 367 "dtc-parser.y" /* yacc.c:1646 */ ++ case 45: ++#line 383 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); } +-#line 1825 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1845 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 45: +-#line 372 "dtc-parser.y" /* yacc.c:1646 */ ++ case 47: ++#line 388 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); } +-#line 1831 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1851 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 47: +-#line 377 "dtc-parser.y" /* yacc.c:1646 */ ++ case 49: ++#line 393 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); } +-#line 1837 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1857 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 49: +-#line 382 "dtc-parser.y" /* yacc.c:1646 */ ++ case 51: ++#line 398 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); } +-#line 1843 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1863 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 51: +-#line 387 "dtc-parser.y" /* yacc.c:1646 */ ++ case 53: ++#line 403 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); } +-#line 1849 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1869 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 52: +-#line 388 "dtc-parser.y" /* yacc.c:1646 */ ++ case 54: ++#line 404 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); } +-#line 1855 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1875 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 54: +-#line 393 "dtc-parser.y" /* yacc.c:1646 */ ++ case 56: ++#line 409 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); } +-#line 1861 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1881 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 55: +-#line 394 "dtc-parser.y" /* yacc.c:1646 */ ++ case 57: ++#line 410 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); } +-#line 1867 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1887 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 56: +-#line 395 "dtc-parser.y" /* yacc.c:1646 */ ++ case 58: ++#line 411 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); } +-#line 1873 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1893 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 57: +-#line 396 "dtc-parser.y" /* yacc.c:1646 */ ++ case 59: ++#line 412 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); } +-#line 1879 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1899 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 58: +-#line 400 "dtc-parser.y" /* yacc.c:1646 */ ++ case 60: ++#line 416 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); } +-#line 1885 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1905 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 59: +-#line 401 "dtc-parser.y" /* yacc.c:1646 */ ++ case 61: ++#line 417 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); } +-#line 1891 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1911 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 61: +-#line 406 "dtc-parser.y" /* yacc.c:1646 */ ++ case 63: ++#line 422 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); } +-#line 1897 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1917 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 62: +-#line 407 "dtc-parser.y" /* yacc.c:1646 */ ++ case 64: ++#line 423 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); } +-#line 1903 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1923 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 64: +-#line 412 "dtc-parser.y" /* yacc.c:1646 */ ++ case 66: ++#line 428 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); } +-#line 1909 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1929 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 65: +-#line 414 "dtc-parser.y" /* yacc.c:1646 */ +- { +- if ((yyvsp[0].integer) != 0) { +- (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); +- } else { +- ERROR(&(yyloc), "Division by zero"); +- (yyval.integer) = 0; +- } +- } +-#line 1922 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ case 67: ++#line 429 "dtc-parser.y" /* yacc.c:1646 */ ++ { (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); } ++#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 66: +-#line 423 "dtc-parser.y" /* yacc.c:1646 */ +- { +- if ((yyvsp[0].integer) != 0) { +- (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); +- } else { +- ERROR(&(yyloc), "Division by zero"); +- (yyval.integer) = 0; +- } +- } +-#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ case 68: ++#line 430 "dtc-parser.y" /* yacc.c:1646 */ ++ { (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); } ++#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 69: ++ case 71: + #line 436 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = -(yyvsp[0].integer); } +-#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 70: ++ case 72: + #line 437 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = ~(yyvsp[0].integer); } +-#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 71: ++ case 73: + #line 438 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = !(yyvsp[0].integer); } +-#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1959 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 72: ++ case 74: + #line 443 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = empty_data; + } +-#line 1961 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1967 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 73: ++ case 75: + #line 447 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte)); + } +-#line 1969 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1975 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 74: ++ case 76: + #line 451 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1977 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1983 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 75: ++ case 77: + #line 458 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.nodelist) = NULL; + } +-#line 1985 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 76: ++ case 78: + #line 462 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist)); + } +-#line 1993 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1999 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 77: ++ case 79: + #line 466 "dtc-parser.y" /* yacc.c:1646 */ + { + ERROR(&(yylsp[0]), "Properties must precede subnodes"); + YYERROR; + } +-#line 2002 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2008 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 78: ++ case 80: + #line 474 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename)); + } +-#line 2010 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2016 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 79: ++ case 81: + #line 478 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename)); + } +-#line 2018 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2024 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 80: ++ case 82: + #line 482 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[0].node); + } +-#line 2027 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2033 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + +-#line 2031 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2037 "dtc-parser.tab.c" /* yacc.c:1646 */ + default: break; + } + /* User semantic actions sometimes alter yychar, and that requires +diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped +index 30867c688300..276d0788f858 100644 +--- a/scripts/dtc/dtc-parser.tab.h_shipped ++++ b/scripts/dtc/dtc-parser.tab.h_shipped +@@ -46,26 +46,27 @@ extern int yydebug; + enum yytokentype + { + DT_V1 = 258, +- DT_MEMRESERVE = 259, +- DT_LSHIFT = 260, +- DT_RSHIFT = 261, +- DT_LE = 262, +- DT_GE = 263, +- DT_EQ = 264, +- DT_NE = 265, +- DT_AND = 266, +- DT_OR = 267, +- DT_BITS = 268, +- DT_DEL_PROP = 269, +- DT_DEL_NODE = 270, +- DT_PROPNODENAME = 271, +- DT_LITERAL = 272, +- DT_CHAR_LITERAL = 273, +- DT_BYTE = 274, +- DT_STRING = 275, +- DT_LABEL = 276, +- DT_REF = 277, +- DT_INCBIN = 278 ++ DT_PLUGIN = 259, ++ DT_MEMRESERVE = 260, ++ DT_LSHIFT = 261, ++ DT_RSHIFT = 262, ++ DT_LE = 263, ++ DT_GE = 264, ++ DT_EQ = 265, ++ DT_NE = 266, ++ DT_AND = 267, ++ DT_OR = 268, ++ DT_BITS = 269, ++ DT_DEL_PROP = 270, ++ DT_DEL_NODE = 271, ++ DT_PROPNODENAME = 272, ++ DT_LITERAL = 273, ++ DT_CHAR_LITERAL = 274, ++ DT_BYTE = 275, ++ DT_STRING = 276, ++ DT_LABEL = 277, ++ DT_REF = 278, ++ DT_INCBIN = 279 + }; + #endif + +@@ -74,7 +75,7 @@ extern int yydebug; + typedef union YYSTYPE YYSTYPE; + union YYSTYPE + { +-#line 38 "dtc-parser.y" /* yacc.c:1909 */ ++#line 39 "dtc-parser.y" /* yacc.c:1909 */ + + char *propnodename; + char *labelref; +@@ -92,8 +93,9 @@ union YYSTYPE + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + +-#line 97 "dtc-parser.tab.h" /* yacc.c:1909 */ ++#line 99 "dtc-parser.tab.h" /* yacc.c:1909 */ + }; + # define YYSTYPE_IS_TRIVIAL 1 + # define YYSTYPE_IS_DECLARED 1 +diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y +index 000873f070fd..bd67bacd543d 100644 +--- a/scripts/dtc/dtc-parser.y ++++ b/scripts/dtc/dtc-parser.y +@@ -19,6 +19,7 @@ + */ + %{ + #include ++#include + + #include "dtc.h" + #include "srcpos.h" +@@ -52,9 +53,11 @@ extern bool treesource_error; + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + } + + %token DT_V1 ++%token DT_PLUGIN + %token DT_MEMRESERVE + %token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR + %token DT_BITS +@@ -71,6 +74,7 @@ extern bool treesource_error; + + %type propdata + %type propdataprefix ++%type plugindecl + %type memreserve + %type memreserves + %type arrayprefix +@@ -101,10 +105,22 @@ extern bool treesource_error; + %% + + sourcefile: +- DT_V1 ';' memreserves devicetree ++ DT_V1 ';' plugindecl memreserves devicetree + { +- the_boot_info = build_boot_info($3, $4, +- guess_boot_cpuid($4)); ++ $5->is_plugin = $3; ++ the_boot_info = build_boot_info($4, $5, ++ guess_boot_cpuid($5)); ++ } ++ ; ++ ++plugindecl: ++ /* empty */ ++ { ++ $$ = false; ++ } ++ | DT_PLUGIN ';' ++ { ++ $$ = true; + } + ; + +diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c +index 5fa23c406266..1f8c2852bf14 100644 +--- a/scripts/dtc/dtc.c ++++ b/scripts/dtc/dtc.c +@@ -31,6 +31,7 @@ int reservenum; /* Number of memory reservation slots */ + int minsize; /* Minimum blob size */ + int padsize; /* Additional padding to blob */ + int phandle_format = PHANDLE_BOTH; /* Use linux,phandle or phandle properties */ ++int symbol_fixup_support = 0; + + static void fill_fullpaths(struct node *tree, const char *prefix) + { +@@ -53,7 +54,7 @@ static void fill_fullpaths(struct node *tree, const char *prefix) + #define FDT_VERSION(version) _FDT_VERSION(version) + #define _FDT_VERSION(version) #version + static const char usage_synopsis[] = "dtc [options] "; +-static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:hv"; ++static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:@hv"; + static struct option const usage_long_opts[] = { + {"quiet", no_argument, NULL, 'q'}, + {"in-format", a_argument, NULL, 'I'}, +@@ -71,6 +72,7 @@ static struct option const usage_long_opts[] = { + {"phandle", a_argument, NULL, 'H'}, + {"warning", a_argument, NULL, 'W'}, + {"error", a_argument, NULL, 'E'}, ++ {"symbols", no_argument, NULL, '@'}, + {"help", no_argument, NULL, 'h'}, + {"version", no_argument, NULL, 'v'}, + {NULL, no_argument, NULL, 0x0}, +@@ -101,6 +103,7 @@ static const char * const usage_opts_help[] = { + "\t\tboth - Both \"linux,phandle\" and \"phandle\" properties", + "\n\tEnable/disable warnings (prefix with \"no-\")", + "\n\tEnable/disable errors (prefix with \"no-\")", ++ "\n\tEnable symbols/fixup support", + "\n\tPrint this help and exit", + "\n\tPrint version and exit", + NULL, +@@ -233,7 +236,9 @@ int main(int argc, char *argv[]) + case 'E': + parse_checks_option(false, true, optarg); + break; +- ++ case '@': ++ symbol_fixup_support = 1; ++ break; + case 'h': + usage(NULL); + default: +diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h +index 56212c8df660..f163b22b14b8 100644 +--- a/scripts/dtc/dtc.h ++++ b/scripts/dtc/dtc.h +@@ -54,6 +54,7 @@ extern int reservenum; /* Number of memory reservation slots */ + extern int minsize; /* Minimum blob size */ + extern int padsize; /* Additional padding to blob */ + extern int phandle_format; /* Use linux,phandle or phandle properties */ ++extern int symbol_fixup_support;/* enable symbols & fixup support */ + + #define PHANDLE_LEGACY 0x1 + #define PHANDLE_EPAPR 0x2 +@@ -132,6 +133,26 @@ struct label { + struct label *next; + }; + ++struct fixup_entry { ++ int offset; ++ struct node *node; ++ struct property *prop; ++ struct fixup_entry *next; ++ bool local_fixup_generated; ++}; ++ ++struct fixup { ++ char *ref; ++ struct fixup_entry *entries; ++ struct fixup *next; ++}; ++ ++struct symbol { ++ struct label *label; ++ struct node *node; ++ struct symbol *next; ++}; ++ + struct property { + bool deleted; + char *name; +@@ -158,6 +179,13 @@ struct node { + int addr_cells, size_cells; + + struct label *labels; ++ ++ struct symbol *symbols; ++ struct fixup_entry *local_fixups; ++ bool emit_local_fixup_node; ++ ++ bool is_plugin; ++ struct fixup *fixups; + }; + + #define for_each_label_withdel(l0, l) \ +@@ -181,6 +209,18 @@ struct node { + for_each_child_withdel(n, c) \ + if (!(c)->deleted) + ++#define for_each_fixup(n, f) \ ++ for ((f) = (n)->fixups; (f); (f) = (f)->next) ++ ++#define for_each_fixup_entry(f, fe) \ ++ for ((fe) = (f)->entries; (fe); (fe) = (fe)->next) ++ ++#define for_each_symbol(n, s) \ ++ for ((s) = (n)->symbols; (s); (s) = (s)->next) ++ ++#define for_each_local_fixup_entry(n, fe) \ ++ for ((fe) = (n)->local_fixups; (fe); (fe) = (fe)->next) ++ + void add_label(struct label **labels, char *label); + void delete_labels(struct label **labels); + +diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c +index ec14954f5810..f8f1e34b781f 100644 +--- a/scripts/dtc/flattree.c ++++ b/scripts/dtc/flattree.c +@@ -255,6 +255,204 @@ static int stringtable_insert(struct data *d, const char *str) + return i; + } + ++static void emit_local_fixups(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, struct version_info *vi, ++ struct node *node) ++{ ++ struct fixup_entry *fe, *fen; ++ struct node *child; ++ int nameoff, count; ++ cell_t *buf; ++ struct data d; ++ ++ if (node->emit_local_fixup_node) { ++ ++ /* emit the external fixups (do not emit /) */ ++ if (node != tree) { ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, node->name, 0); ++ emit->align(etarget, sizeof(cell_t)); ++ } ++ ++ for_each_local_fixup_entry(tree, fe) { ++ if (fe->node != node || fe->local_fixup_generated) ++ continue; ++ ++ /* count the number of fixup entries */ ++ count = 0; ++ for_each_local_fixup_entry(tree, fen) { ++ if (fen->prop != fe->prop) ++ continue; ++ fen->local_fixup_generated = true; ++ count++; ++ } ++ ++ /* allocate buffer */ ++ buf = xmalloc(count * sizeof(cell_t)); ++ ++ /* collect all the offsets in buffer */ ++ count = 0; ++ for_each_local_fixup_entry(tree, fen) { ++ if (fen->prop != fe->prop) ++ continue; ++ fen->local_fixup_generated = true; ++ buf[count++] = cpu_to_fdt32(fen->offset); ++ } ++ d = empty_data; ++ d.len = count * sizeof(cell_t); ++ d.val = (char *)buf; ++ ++ nameoff = stringtable_insert(strbuf, fe->prop->name); ++ emit->property(etarget, fe->prop->labels); ++ emit->cell(etarget, count * sizeof(cell_t)); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && ++ (count * sizeof(cell_t)) >= 8) ++ emit->align(etarget, 8); ++ ++ emit->data(etarget, d); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ free(buf); ++ } ++ } ++ ++ for_each_child(node, child) ++ emit_local_fixups(tree, emit, etarget, strbuf, vi, child); ++ ++ if (node->emit_local_fixup_node && node != tree) ++ emit->endnode(etarget, tree->labels); ++} ++ ++static void emit_symbols_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct symbol *sym; ++ int nameoff, vallen; ++ ++ /* do nothing if no symbols */ ++ if (!tree->symbols) ++ return; ++ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__symbols__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ for_each_symbol(tree, sym) { ++ ++ vallen = strlen(sym->node->fullpath); ++ ++ nameoff = stringtable_insert(strbuf, sym->label->label); ++ ++ emit->property(etarget, NULL); ++ emit->cell(etarget, vallen + 1); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) ++ emit->align(etarget, 8); ++ ++ emit->string(etarget, sym->node->fullpath, ++ strlen(sym->node->fullpath)); ++ emit->align(etarget, sizeof(cell_t)); ++ } ++ ++ emit->endnode(etarget, NULL); ++} ++ ++static void emit_local_fixups_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct fixup_entry *fe; ++ struct node *node; ++ ++ /* do nothing if no local fixups */ ++ if (!tree->local_fixups) ++ return; ++ ++ /* mark all nodes that need a local fixup generated (and parents) */ ++ for_each_local_fixup_entry(tree, fe) { ++ node = fe->node; ++ while (node != NULL && !node->emit_local_fixup_node) { ++ node->emit_local_fixup_node = true; ++ node = node->parent; ++ } ++ } ++ ++ /* emit the local fixups node now */ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__local_fixups__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ emit_local_fixups(tree, emit, etarget, strbuf, vi, tree); ++ ++ emit->endnode(etarget, tree->labels); ++} ++ ++static void emit_fixups_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct fixup *f; ++ struct fixup_entry *fe; ++ char *name, *s; ++ const char *fullpath; ++ int namesz, nameoff, vallen; ++ ++ /* do nothing if no fixups */ ++ if (!tree->fixups) ++ return; ++ ++ /* emit the external fixups */ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__fixups__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ for_each_fixup(tree, f) { ++ ++ namesz = 0; ++ for_each_fixup_entry(f, fe) { ++ fullpath = fe->node->fullpath; ++ if (fullpath[0] == '\0') ++ fullpath = "/"; ++ namesz += strlen(fullpath) + 1; ++ namesz += strlen(fe->prop->name) + 1; ++ namesz += 32; /* space for : + '\0' */ ++ } ++ ++ name = xmalloc(namesz); ++ ++ s = name; ++ for_each_fixup_entry(f, fe) { ++ fullpath = fe->node->fullpath; ++ if (fullpath[0] == '\0') ++ fullpath = "/"; ++ snprintf(s, name + namesz - s, "%s:%s:%d", fullpath, ++ fe->prop->name, fe->offset); ++ s += strlen(s) + 1; ++ } ++ ++ nameoff = stringtable_insert(strbuf, f->ref); ++ vallen = s - name - 1; ++ ++ emit->property(etarget, NULL); ++ emit->cell(etarget, vallen + 1); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) ++ emit->align(etarget, 8); ++ ++ emit->string(etarget, name, vallen); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ free(name); ++ } ++ ++ emit->endnode(etarget, tree->labels); ++} ++ + static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +@@ -310,6 +508,10 @@ static void flatten_tree(struct node *tree, struct emitter *emit, + flatten_tree(child, emit, etarget, strbuf, vi); + } + ++ emit_symbols_node(tree, emit, etarget, strbuf, vi); ++ emit_local_fixups_node(tree, emit, etarget, strbuf, vi); ++ emit_fixups_node(tree, emit, etarget, strbuf, vi); ++ + emit->endnode(etarget, tree->labels); + } + +diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h +index ad9b05ae698b..2595dfda020f 100644 +--- a/scripts/dtc/version_gen.h ++++ b/scripts/dtc/version_gen.h +@@ -1 +1 @@ +-#define DTC_VERSION "DTC 1.4.1-g53bf130b" ++#define DTC_VERSION "DTC 1.4.1-g25efc119" diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1053_d47a85f0b306be3a0e9fb1ec66e39343c641715f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1053_d47a85f0b306be3a0e9fb1ec66e39343c641715f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1053_d47a85f0b306be3a0e9fb1ec66e39343c641715f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1053_d47a85f0b306be3a0e9fb1ec66e39343c641715f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,9901 @@ +commit d47a85f0b306be3a0e9fb1ec66e39343c641715f +Author: notro +Date: Wed Jul 9 14:46:08 2014 +0200 + + BCM2708: Add core Device Tree support + + Add the bare minimum needed to boot BCM2708 from a Device Tree. + + Signed-off-by: Noralf Tronnes + + BCM2708: DT: change 'axi' nodename to 'soc' + + Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. + The VC4 bootloader fills in certain properties in the 'axi' subtree, + but since this is part of an upstreaming effort, the name is changed. + + Signed-off-by: Noralf Tronnes notro@tronnes.org + + BCM2708_DT: Correct length of the peripheral space + + Use dts-dirs feature for overlays. + + The kernel makefiles have a dts-dirs target that is for vendor subdirectories. + + Using this fixes the install_dtbs target, which previously did not install the overlays. + + BCM270X_DT: configure I2S DMA channels + + Signed-off-by: Matthias Reichl + + BCM270X_DT: switch to bcm2835-i2s + + I2S soundcard drivers with proper devicetree support (i.e. not linking + to the cpu_dai/platform via name but to cpu/platform via of_node) + will work out of the box without any modifications. + + When the kernel is compiled without devicetree support the platform + code will instantiate the bcm2708-i2s driver and I2S soundcard drivers + will link to it via name, as before. + + Signed-off-by: Matthias Reichl + + SDIO-overlay: add poll_once-boolean parameter + + Add paramter to toggle sdio-device-polling + done every second or once at boot-time. + + Signed-off-by: Patrick Boettcher + + BCM270X_DT: Make mmc overlay compatible with current firmware + + The original DT overlay logic followed a merge-then-patch procedure, + i.e. parameters are applied to the loaded overlay before the overlay + is merged into the base DTB. This sequence has been changed to + patch-then-merge, in order to support parameterised node names, and + to protect against bad overlays. As a result, overrides (parameters) + must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. + + mmc-overlay.dts (that switches back to the original mmc sdcard + driver) is the only overlay violating that rule, and this patch + fixes it. + + bcm270x_dt: Use the sdhost MMC controller by default + + The "mmc" overlay reverts to using the other controller. + + squash: Add cprman to dt + + BCM270X_DT: Use clk_core for I2C interfaces + + BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi + + The mainline Device Tree files are quite close to downstream now. + Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files + for our dts files. + + Mainline dts files are based on these files: + + bcm2835-rpi.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + + Current downstream are based on these: + + bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi + bcm2708_common.dtsi + + This patch introduces this dependency: + + bcm2708.dtsi bcm2709.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + + And: + bcm2710.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm283x.dtsi + + bcm270x.dtsi contains the downstream bcm283x.dtsi diff. + bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. + + Other changes: + - The led node has moved from /soc/leds to /leds. This is not a problem + since the label is used to reference it. + - The clk_osc reg property changes from 6 to 3. + - The gpu nodes has their interrupt property set in the base file. + - the clocks label does not point to the /clocks node anymore, but + points to the cprman node. This is not a problem since the overlays + that use the clock node refer to it directly: target-path = "/clocks"; + - some nodes now have 2 labels since mainline and downstream differs in + this respect: cprman/clocks, spi0/spi, gpu/vc4. + - some nodes doesn't have an explicit status = "okay" since they're not + disabled in the base file: watchdog and random. + - gpiomem doesn't need an explicit status = "okay". + - bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, + it's now set directly in that file. + - bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. + - Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. + + Signed-off-by: Noralf Trønnes + + BCM270X_DT: Use raspberrypi-power to turn on USB power + + Use the raspberrypi-power driver to turn on USB power. + + Signed-off-by: Noralf Trønnes + + BCM270X_DT: Add a .dtbo target, use for overlays + + Change the filenames and extensions to keep the pre-DDT style of + overlay (-overlay.dtb) distinct from new ones that use a + different style of local fixups (.dtbo), and to match other + platforms. + + The RPi firmware uses the DDTK trailer atom to choose which type of + overlay to use for each kernel. + + Signed-off-by: Phil Elwell + + BCM270X_DT: Don't generate "linux,phandle" props + + The EPAPR standard says to use "phandle" properties to store phandles, + rather than the deprecated "linux,phandle" version. By default, dtc + generates both, but adding "-H epapr" causes it to only generate + "phandle"s, saving some space and clutter. + + Signed-off-by: Phil Elwell + + BCM270X_DT: Add overlay for enc28j60 on SPI2 + + Works on SPI2 for compute module + + BCM270X_DT: Add midi-uart0 overlay + + MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The + midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock + so that requesting 38.4kbaud actually gets 31.25kbaud. + + Signed-off-by: Phil Elwell + + BCM270X_DT: Add i2c-sensor overlay + + The i2c-sensor overlay is a container for various pressure and + temperature sensors, currently bmp085 and bmp280. The standalone + bmp085_i2c-sensor overlay is now deprecated. + + Signed-off-by: Phil Elwell + + BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) + + We now create overlays as .dtbo files. + + build: support for .dtbo files for dtb overlays + + Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. + Patch the kernel, which has faulty rules to generate .dtbo the way yocto does + + Signed-off-by: Herve Jourdain + Signed-off-by: Khem Raj + +diff --git a/arch/arm/Makefile b/arch/arm/Makefile +index 6be9ee148b78..b1c49e2a0c5f 100644 +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -334,6 +334,8 @@ $(INSTALL_TARGETS): + + %.dtb: | scripts + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ ++%.dtbo: | scripts ++ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ + + PHONY += dtbs dtbs_install + +diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore +index 3c79f85975aa..eaaeb17e5986 100644 +--- a/arch/arm/boot/.gitignore ++++ b/arch/arm/boot/.gitignore +@@ -3,4 +3,4 @@ zImage + xipImage + bootpImage + uImage +-*.dtb ++*.dtb* +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 55b773320124..c66a6d6b2491 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1,5 +1,13 @@ + ifeq ($(CONFIG_OF),y) + ++dtb-$(CONFIG_ARCH_BCM2835) += \ ++ bcm2708-rpi-b.dtb \ ++ bcm2708-rpi-b-plus.dtb \ ++ bcm2708-rpi-cm.dtb \ ++ bcm2709-rpi-2-b.dtb \ ++ bcm2710-rpi-3-b.dtb \ ++ bcm2710-rpi-cm3.dtb ++ + dtb-$(CONFIG_ARCH_ALPINE) += \ + alpine-db.dtb + dtb-$(CONFIG_MACH_ARTPEC6) += \ +@@ -957,10 +965,21 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ + dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb + dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-ast2500-evb.dtb ++ ++targets += dtbs dtbs_install ++targets += $(dtb-y) ++ + endif + + dtstree := $(srctree)/$(src) + dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + + always := $(dtb-y) ++subdir-y := overlays + clean-files := *.dtb ++ ++# Enable fixups to support overlays on BCM2835 platforms ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++ DTC_FLAGS ?= -@ -H epapr ++ dts-dirs += overlays ++endif +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +new file mode 100644 +index 000000000000..360da5c928dc +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -0,0 +1,156 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Model B+"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts +new file mode 100644 +index 000000000000..9c49659ab246 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -0,0 +1,146 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 16 1>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +new file mode 100644 +index 000000000000..eb8662f0d222 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -0,0 +1,105 @@ ++/dts-v1/; ++ ++#include "bcm2708-rpi-cm.dtsi" ++ ++/ { ++ model = "Raspberry Pi Compute Module"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +new file mode 100644 +index 000000000000..d33d462b4090 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +@@ -0,0 +1,50 @@ ++#include "bcm2708.dtsi" ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++}; ++ ++&gpio { ++ mmc_pins: mmc_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <7>; /* alt3 */ ++ }; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&mmc>,"brcm,overclock-50:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi +new file mode 100644 +index 000000000000..46cf8602c3b9 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -0,0 +1,109 @@ ++/* Downstream version of bcm2835-rpi.dtsi */ ++ ++#include ++ ++/ { ++ memory { ++ device_type = "memory"; ++ reg = <0x0 0x0>; ++ }; ++ ++ aliases { ++ audio = &audio; ++ aux = &aux; ++ sound = &sound; ++ soc = &soc; ++ dma = &dma; ++ intc = &intc; ++ watchdog = &watchdog; ++ random = &random; ++ mailbox = &mailbox; ++ gpio = &gpio; ++ uart0 = &uart0; ++ sdhost = &sdhost; ++ i2s = &i2s; ++ spi0 = &spi0; ++ i2c0 = &i2c0; ++ uart1 = &uart1; ++ spi1 = &spi1; ++ spi2 = &spi2; ++ mmc = &mmc; ++ i2c1 = &i2c1; ++ i2c2 = &i2c2; ++ usb = &usb; ++ leds = &leds; ++ fb = &fb; ++ vchiq = &vchiq; ++ thermal = &thermal; ++ }; ++ ++ leds: leds { ++ compatible = "gpio-leds"; ++ }; ++ ++ soc { ++ gpiomem { ++ compatible = "brcm,bcm2835-gpiomem"; ++ reg = <0x7e200000 0x1000>; ++ }; ++ ++ firmware: firmware { ++ compatible = "raspberrypi,bcm2835-firmware"; ++ mboxes = <&mailbox>; ++ }; ++ ++ power: power { ++ compatible = "raspberrypi,bcm2835-power"; ++ firmware = <&firmware>; ++ #power-domain-cells = <1>; ++ }; ++ ++ fb: fb { ++ compatible = "brcm,bcm2708-fb"; ++ firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ vchiq: vchiq { ++ compatible = "brcm,bcm2835-vchiq"; ++ reg = <0x7e00b840 0xf>; ++ interrupts = <0 2>; ++ cache-line-size = <32>; ++ firmware = <&firmware>; ++ }; ++ ++ thermal: thermal { ++ compatible = "brcm,bcm2835-thermal"; ++ firmware = <&firmware>; ++ }; ++ ++ /* Onboard audio */ ++ audio: audio { ++ compatible = "brcm,bcm2835-audio"; ++ brcm,pwm-channels = <8>; ++ status = "disabled"; ++ }; ++ ++ /* External sound card */ ++ sound: sound { ++ status = "disabled"; ++ }; ++ ++ }; ++ ++ __overrides__ { ++ cache_line_size = <&vchiq>, "cache-line-size:0"; ++ }; ++}; ++ ++&dma { ++ brcm,dma-channel-mask = <0x7f34>; ++}; ++ ++&hdmi { ++ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++}; ++ ++&usb { ++ power-domains = <&power RPI_POWER_DOMAIN_USB>; ++}; +diff --git a/arch/arm/boot/dts/bcm2708.dtsi b/arch/arm/boot/dts/bcm2708.dtsi +new file mode 100644 +index 000000000000..0f72bd90c591 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708.dtsi +@@ -0,0 +1,16 @@ ++#include "bcm2835.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ soc { ++ timer@7e003000 { ++ compatible = "brcm,bcm2835-system-timer"; ++ reg = <0x7e003000 0x1000>; ++ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; ++ clock-frequency = <1000000>; ++ }; ++ }; ++ ++ /delete-node/ cpus; ++}; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +new file mode 100644 +index 000000000000..19c83823420f +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -0,0 +1,156 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++ ++/ { ++ model = "Raspberry Pi 2 Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2709.dtsi b/arch/arm/boot/dts/bcm2709.dtsi +new file mode 100644 +index 000000000000..343437db9482 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709.dtsi +@@ -0,0 +1,22 @@ ++#include "bcm2836.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ ++ syscon@40000000 { ++ compatible = "brcm,bcm2836-arm-local", "syscon"; ++ reg = <0x40000000 0x100>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi +new file mode 100644 +index 000000000000..a46cb4a8b141 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -0,0 +1,141 @@ ++/* Downstream bcm283x.dtsi diff */ ++#include "dt-bindings/power/raspberrypi-power.h" ++ ++/ { ++ chosen { ++ bootargs = ""; ++ }; ++ ++ soc: soc { ++ ++ /delete-node/ timer@7e003000; ++ ++ watchdog: watchdog@7e100000 { ++ /* Add alias */ ++ }; ++ ++ cprman: cprman@7e101000 { ++ /* Add alias */ ++ }; ++ ++ random: rng@7e104000 { ++ /* Add alias */ ++ }; ++ ++ gpio@7e200000 { /* gpio */ ++ interrupts = <2 17>, <2 18>; ++ }; ++ ++ sdhost: sdhost@7e202000 { ++ compatible = "brcm,bcm2835-sdhost"; ++ reg = <0x7e202000 0x100>; ++ interrupts = <2 24>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ dmas = <&dma 13>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ status = "disabled"; ++ }; ++ ++ i2s@7e203000 { /* i2s */ ++ #sound-dai-cells = <0>; ++ reg = <0x7e203000 0x24>; ++ clocks = <&clocks BCM2835_CLOCK_PCM>; ++ }; ++ ++ spi0: spi@7e204000 { ++ /* Add alias */ ++ dmas = <&dma 6>, <&dma 7>; ++ dma-names = "tx", "rx"; ++ }; ++ ++ pixelvalve0: pixelvalve@7e206000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ pixelvalve1: pixelvalve@7e207000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ dpi: dpi@7e208000 { ++ compatible = "brcm,bcm2835-dpi"; ++ reg = <0x7e208000 0x8c>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>, ++ <&clocks BCM2835_CLOCK_DPI>; ++ clock-names = "core", "pixel"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ /delete-node/ sdhci@7e300000; ++ ++ mmc: mmc@7e300000 { ++ compatible = "brcm,bcm2835-mmc"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ status = "disabled"; ++ }; ++ ++ hvs: hvs@7e400000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ firmwarekms: firmwarekms@7e600000 { ++ compatible = "raspberrypi,rpi-firmware-kms"; ++ /* SMI interrupt reg */ ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ brcm,firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clocks = <&cprman BCM2835_CLOCK_SMI>; ++ assigned-clock-rates = <125000000>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ status = "disabled"; ++ }; ++ ++ pixelvalve2: pixelvalve@7e807000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ hdmi@7e902000 { /* hdmi */ ++ status = "disabled"; ++ }; ++ ++ usb@7e980000 { /* usb */ ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupts = <2 0>, ++ <1 9>; ++ }; ++ ++ v3d@7ec00000 { /* vd3 */ ++ compatible = "brcm,vc4-v3d"; ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++ status = "disabled"; ++ }; ++ ++ gpu: gpu { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +new file mode 100644 +index 000000000000..12764a3495b2 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -0,0 +1,203 @@ ++/dts-v1/; ++ ++#ifdef RPI364 ++/memreserve/ 0x00000000 0x00001000; ++#endif ++ ++#include "bcm2710.dtsi" ++ ++/ { ++ model = "Raspberry Pi 3 Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ chosen { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +new file mode 100644 +index 000000000000..41874c25a842 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -0,0 +1,155 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++ ++/ { ++ model = "Raspberry Pi Compute Module 3"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710.dtsi b/arch/arm/boot/dts/bcm2710.dtsi +new file mode 100644 +index 000000000000..f6def5d7e5d6 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -0,0 +1,155 @@ ++#include "bcm283x.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2837", "brcm,bcm2836"; ++ model = "BCM2837"; ++ ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; ++ ++ local_intc: local_intc { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&local_intc>; ++ }; ++ ++ arm-pmu { ++#ifdef RPI364 ++ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; ++#else ++ compatible = "arm,cortex-a7-pmu"; ++#endif ++ interrupt-parent = <&local_intc>; ++ interrupts = <9>; ++ }; ++ ++ timer { ++#ifdef RPI364 ++ compatible = "arm,armv8-timer", "arm,armv7-timer"; ++#else ++ compatible = "arm,armv7-timer"; ++#endif ++ interrupt-parent = <&local_intc>; ++ interrupts = <0>, // PHYS_SECURE_PPI ++ <1>, // PHYS_NONSECURE_PPI ++ <3>, // VIRT_PPI ++ <2>; // HYP_PPI ++ always-on; ++ }; ++ ++ syscon@40000000 { ++ compatible = "brcm,bcm2836-arm-local", "syscon"; ++ reg = <0x40000000 0x100>; ++ }; ++ }; ++ ++#ifdef RPI364 ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ v8_cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x0>; ++ clock-frequency = <1200000000>; ++ }; ++ ++ v8_cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x1>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e0>; ++ }; ++ ++ v8_cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x2>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e8>; ++ }; ++ ++ v8_cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x3>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000f0>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v8_cpu0>, "clock-frequency:0", ++ <&v8_cpu1>, "clock-frequency:0", ++ <&v8_cpu2>, "clock-frequency:0", ++ <&v8_cpu3>, "clock-frequency:0"; ++ }; ++ ++#else ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ v7_cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x000>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x001>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x002>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x003>; ++ clock-frequency = <800000000>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++#endif ++}; ++ ++&intc { ++ compatible = "brcm,bcm2836-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-parent = <&local_intc>; ++ interrupts = <8>; ++}; ++ ++#ifdef RPI364 ++&usb { ++ compatible = "brcm,bcm2835-usb"; ++ reg = <0x7e980000 0x10000>; ++ interrupts = <1 9>; ++}; ++#endif +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +new file mode 100644 +index 000000000000..11dba3171284 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -0,0 +1,105 @@ ++# Overlays for the Raspberry Pi platform ++ ++dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ adau1977-adc.dtbo \ ++ ads1015.dtbo \ ++ ads7846.dtbo \ ++ akkordion-iqdacplus.dtbo \ ++ allo-piano-dac-pcm512x-audio.dtbo \ ++ at86rf233.dtbo \ ++ audioinjector-wm8731-audio.dtbo \ ++ audremap.dtbo \ ++ bmp085_i2c-sensor.dtbo \ ++ dht11.dtbo \ ++ dionaudio-loco.dtbo \ ++ dpi18.dtbo \ ++ dpi24.dtbo \ ++ dwc-otg.dtbo \ ++ dwc2.dtbo \ ++ enc28j60.dtbo \ ++ enc28j60-spi2.dtbo \ ++ gpio-ir.dtbo \ ++ gpio-poweroff.dtbo \ ++ hifiberry-amp.dtbo \ ++ hifiberry-dac.dtbo \ ++ hifiberry-dacplus.dtbo \ ++ hifiberry-digi.dtbo \ ++ hifiberry-digi-pro.dtbo \ ++ hy28a.dtbo \ ++ hy28b.dtbo \ ++ i2c-bcm2708.dtbo \ ++ i2c-gpio.dtbo \ ++ i2c-mux.dtbo \ ++ i2c-pwm-pca9685a.dtbo \ ++ i2c-rtc.dtbo \ ++ i2c-sensor.dtbo \ ++ i2c0-bcm2708.dtbo \ ++ i2c1-bcm2708.dtbo \ ++ i2s-gpio28-31.dtbo \ ++ iqaudio-dac.dtbo \ ++ iqaudio-dacplus.dtbo \ ++ iqaudio-digi-wm8804-audio.dtbo \ ++ justboom-dac.dtbo \ ++ justboom-digi.dtbo \ ++ lirc-rpi.dtbo \ ++ mcp23017.dtbo \ ++ mcp23s17.dtbo \ ++ mcp2515-can0.dtbo \ ++ mcp2515-can1.dtbo \ ++ midi-uart0.dtbo \ ++ mmc.dtbo \ ++ mz61581.dtbo \ ++ pi3-act-led.dtbo \ ++ pi3-disable-bt.dtbo \ ++ pi3-miniuart-bt.dtbo \ ++ piscreen.dtbo \ ++ piscreen2r.dtbo \ ++ pisound.dtbo \ ++ pitft22.dtbo \ ++ pitft28-capacitive.dtbo \ ++ pitft28-resistive.dtbo \ ++ pitft35-resistive.dtbo \ ++ pps-gpio.dtbo \ ++ pwm.dtbo \ ++ pwm-2chan.dtbo \ ++ qca7000.dtbo \ ++ raspidac3.dtbo \ ++ rpi-backlight.dtbo \ ++ rpi-dac.dtbo \ ++ rpi-display.dtbo \ ++ rpi-ft5406.dtbo \ ++ rpi-proto.dtbo \ ++ rpi-sense.dtbo \ ++ rra-digidac1-wm8741-audio.dtbo \ ++ sc16is750-i2c.dtbo \ ++ sc16is752-spi1.dtbo \ ++ sdhost.dtbo \ ++ sdio.dtbo \ ++ sdio-1bit.dtbo \ ++ sdtweak.dtbo \ ++ smi.dtbo \ ++ smi-dev.dtbo \ ++ smi-nand.dtbo \ ++ spi-gpio35-39.dtbo \ ++ spi-rtc.dtbo \ ++ spi0-hw-cs.dtbo \ ++ spi1-1cs.dtbo \ ++ spi1-2cs.dtbo \ ++ spi1-3cs.dtbo \ ++ spi2-1cs.dtbo \ ++ spi2-2cs.dtbo \ ++ spi2-3cs.dtbo \ ++ tinylcd35.dtbo \ ++ uart1.dtbo \ ++ vc4-fkms-v3d.dtbo \ ++ vc4-kms-v3d.dtbo \ ++ vga666.dtbo \ ++ w1-gpio.dtbo \ ++ w1-gpio-pullup.dtbo \ ++ wittypi.dtbo ++ ++targets += dtbs dtbs_install ++targets += $(dtbo-y) ++ ++always := $(dtbo-y) ++clean-files := *.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +new file mode 100644 +index 000000000000..81d991803be3 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/README +@@ -0,0 +1,1368 @@ ++Introduction ++============ ++ ++This directory contains Device Tree overlays. Device Tree makes it possible ++to support many hardware configurations with a single kernel and without the ++need to explicitly load or blacklist kernel modules. Note that this isn't a ++"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices ++are still configured by the board support code, but the intention is to ++eventually reach that goal. ++ ++On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By ++default, the Raspberry Pi kernel boots with device tree enabled. You can ++completely disable DT usage (for now) by adding: ++ ++ device_tree= ++ ++to your config.txt, which should cause your Pi to revert to the old way of ++doing things after a reboot. ++ ++In /boot you will find a .dtb for each base platform. This describes the ++hardware that is part of the Raspberry Pi board. The loader (start.elf and its ++siblings) selects the .dtb file appropriate for the platform by name, and reads ++it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) ++are disabled, but they can be enabled using Device Tree parameters: ++ ++ dtparam=i2c=on,i2s=on,spi=on ++ ++However, this shouldn't be necessary in many use cases because loading an ++overlay that requires one of those interfaces will cause it to be enabled ++automatically, and it is advisable to only enable interfaces if they are ++needed. ++ ++Configuring additional, optional hardware is done using Device Tree overlays ++(see below). ++ ++raspi-config ++============ ++ ++The Advanced Options section of the raspi-config utility can enable and disable ++Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it ++is possible to both enable an interface and blacklist the driver, if for some ++reason you should want to defer the loading. ++ ++Modules ++======= ++ ++As well as describing the hardware, Device Tree also gives enough information ++to allow suitable driver modules to be located and loaded, with the corollary ++that unneeded modules are not loaded. As a result it should be possible to ++remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can ++have its contents deleted (or commented out). ++ ++Using Overlays ++============== ++ ++Overlays are loaded using the "dtoverlay" directive. As an example, consider ++the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the ++pre-DT world this would be loaded from /etc/modules, with an explicit ++"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled, ++this becomes a line in config.txt: ++ ++ dtoverlay=lirc-rpi ++ ++This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By ++default it will use GPIOs 17 (out) and 18 (in), but this can be modified using ++DT parameters: ++ ++ dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13 ++ ++Parameters always have default values, although in some cases (e.g. "w1-gpio") ++it is necessary to provided multiple overlays in order to get the desired ++behaviour. See the list of overlays below for a description of the parameters ++and their defaults. ++ ++The Overlay and Parameter Reference ++=================================== ++ ++N.B. When editing this file, please preserve the indentation levels to make it ++simple to parse programmatically. NO HARD TABS. ++ ++ ++Name: ++Info: Configures the base Raspberry Pi hardware ++Load: ++Params: ++ audio Set to "on" to enable the onboard ALSA audio ++ interface (default "off") ++ ++ i2c_arm Set to "on" to enable the ARM's i2c interface ++ (default "off") ++ ++ i2c_vc Set to "on" to enable the i2c interface ++ usually reserved for the VideoCore processor ++ (default "off") ++ ++ i2c An alias for i2c_arm ++ ++ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface ++ (default "100000") ++ ++ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface ++ (default "100000") ++ ++ i2c_baudrate An alias for i2c_arm_baudrate ++ ++ i2s Set to "on" to enable the i2s interface ++ (default "off") ++ ++ spi Set to "on" to enable the spi interfaces ++ (default "off") ++ ++ random Set to "on" to enable the hardware random ++ number generator (default "on") ++ ++ sd_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sd_force_pio Disable DMA support for SD driver (default off) ++ ++ sd_pio_limit Number of blocks above which to use DMA for ++ SD card (default 1) ++ ++ sd_debug Enable debug output from SD driver (default off) ++ ++ uart0 Set to "off" to disable uart0 (default "on") ++ ++ uart1 Set to "on" or "off" to enable or disable uart1 ++ (default varies) ++ ++ watchdog Set to "on" to enable the hardware watchdog ++ (default "off") ++ ++ act_led_trigger Choose which activity the LED tracks. ++ Use "heartbeat" for a nice load indicator. ++ (default "mmc") ++ ++ act_led_activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ N.B. For Pi3 see pi3-act-led overlay. ++ ++ act_led_gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ (default "16" on a non-Plus board, "47" on a ++ Plus or Pi 2) ++ N.B. For Pi3 see pi3-act-led overlay. ++ ++ pwr_led_trigger ++ pwr_led_activelow ++ pwr_led_gpio ++ As for act_led_*, but using the PWR LED. ++ Not available on Model A/B boards. ++ ++ N.B. It is recommended to only enable those interfaces that are needed. ++ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc ++ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) ++ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical ++ interfaces i2c0 and i2c1. Use of the numeric variants is still possible ++ but deprecated because the ARM/VC assignments differ between board ++ revisions. The same board-specific mapping applies to i2c_baudrate, ++ and the other i2c baudrate parameters. ++ ++ ++Name: adau1977-adc ++Info: Overlay for activation of ADAU1977 ADC codec over I2C for control ++ and I2S for data. ++Load: dtoverlay=adau1977-adc ++Params: ++ ++ ++Name: ads1015 ++Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C ++Load: dtoverlay=ads1015,= ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. (default=true) ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=4 sets 1600 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (default=2 sets the ++ full scale of the channel to 2.048 Volts) ++ ++ Channel (ch) parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1015.pdf ++ ++ ++Name: ads7846 ++Info: ADS7846 Touch controller ++Load: dtoverlay=ads7846,= ++Params: cs SPI bus Chip Select (default 1) ++ speed SPI bus speed (default 2MHz, max 3.25MHz) ++ penirq GPIO used for PENIRQ. REQUIRED ++ penirq_pull Set GPIO pull (default 0=none, 2=pullup) ++ swapxy Swap x and y axis ++ xmin Minimum value on the X axis (default 0) ++ ymin Minimum value on the Y axis (default 0) ++ xmax Maximum value on the X axis (default 4095) ++ ymax Maximum value on the Y axis (default 4095) ++ pmin Minimum reported pressure value (default 0) ++ pmax Maximum reported pressure value (default 65535) ++ xohms Touchpanel sensitivity (X-plate resistance) ++ (default 400) ++ ++ penirq is required and usually xohms (60-100) has to be set as well. ++ Apart from that, pmax (255) and swapxy are also common. ++ The rest of the calibration can be done with xinput-calibrator. ++ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian ++ Device Tree binding document: ++ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt ++ ++ ++Name: akkordion-iqdacplus ++Info: Configures the Digital Dreamtime Akkordion Music Player (based on the ++ OEM IQAudIO DAC+ or DAC Zero module). ++Load: dtoverlay=akkordion-iqdacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ dtoverlay=akkordion-iqdacplus,24db_digital_gain ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-piano-dac-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. ++ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. ++ The subwoofer outputs on the Piano 2.1 are not currently supported!) ++Load: dtoverlay=allo-piano-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: at86rf233 ++Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, ++ connected to spi0.0 ++Load: dtoverlay=at86rf233,= ++Params: interrupt GPIO used for INT (default 23) ++ reset GPIO used for Reset (default 24) ++ sleep GPIO used for Sleep (default 25) ++ speed SPI bus speed in Hz (default 3000000) ++ trim Fine tuning of the internal capacitance ++ arrays (0=+0pF, 15=+4.5pF, default 15) ++ ++ ++Name: audioinjector-wm8731-audio ++Info: Configures the audioinjector.net audio add on soundcard ++Load: dtoverlay=audioinjector-wm8731-audio ++Params: ++ ++ ++Name: audremap ++Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) ++Load: dtoverlay=audremap,= ++Params: swap_lr Reverse the channel allocation, which will also ++ swap the audio jack outputs (default off) ++ enable_jack Don't switch off the audio jack output ++ (default off) ++ ++ ++Name: bmp085_i2c-sensor ++Info: This overlay is now deprecated - see i2c-sensor ++Load: dtoverlay=bmp085_i2c-sensor ++Params: ++ ++ ++Name: dht11 ++Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors ++ Also sometimes found with the part number(s) AM230x. ++Load: dtoverlay=dht11,= ++Params: gpiopin GPIO connected to the sensor's DATA output. ++ (default 4) ++ ++ ++Name: dionaudio-loco ++Info: Configures the Dion Audio LOCO DAC-AMP ++Load: dtoverlay=dionaudio-loco ++Params: ++ ++ ++Name: dpi18 ++Info: Overlay for a generic 18-bit DPI display ++ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18 ++Params: ++ ++ ++Name: dpi24 ++Info: Overlay for a generic 24-bit DPI display ++ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi24 ++Params: ++ ++ ++Name: dwc-otg ++Info: Selects the dwc_otg USB controller driver which has fiq support. This ++ is the default on all except the Pi Zero which defaults to dwc2. ++Load: dtoverlay=dwc-otg ++Params: ++ ++ ++Name: dwc2 ++Info: Selects the dwc2 USB controller driver ++Load: dtoverlay=dwc2,= ++Params: dr_mode Dual role mode: "host", "peripheral" or "otg" ++ ++ g-rx-fifo-size Size of rx fifo size in gadget mode ++ ++ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget ++ mode ++ ++ g-tx-fifo-size Size of periodic tx fifo per endpoint ++ (except ep0) in gadget mode ++ ++ ++[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: enc28j60 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 ++Load: dtoverlay=enc28j60,= ++Params: int_pin GPIO used for INT (default 25) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: enc28j60-spi2 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 ++Load: dtoverlay=enc28j60-spi2,= ++Params: int_pin GPIO used for INT (default 39) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: gpio-ir ++Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- ++ based gpio_ir_recv driver maps received keys directly to a ++ /dev/input/event* device, all decoding is done by the kernel - LIRC is ++ not required! The key mapping and other decoding parameters can be ++ configured by "ir-keytable" tool. ++Load: dtoverlay=gpio-ir,= ++Params: gpio_pin Input pin number. Default is 18. ++ ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "down". ++ ++ rc-map-name Default rc keymap (can also be changed by ++ ir-keytable), defaults to "rc-rc6-mce" ++ ++ ++Name: gpio-poweroff ++Info: Drives a GPIO high or low on poweroff (including halt) ++Load: dtoverlay=gpio-poweroff,= ++Params: gpiopin GPIO for signalling (default 26) ++ ++ active_low Set if the power control device requires a ++ high->low transition to trigger a power-down. ++ Note that this will require the support of a ++ custom dt-blob.bin to prevent a power-down ++ during the boot process, and that a reboot ++ will also cause the pin to go low. ++ ++ ++Name: hifiberry-amp ++Info: Configures the HifiBerry Amp and Amp+ audio cards ++Load: dtoverlay=hifiberry-amp ++Params: ++ ++ ++Name: hifiberry-dac ++Info: Configures the HifiBerry DAC audio card ++Load: dtoverlay=hifiberry-dac ++Params: ++ ++ ++Name: hifiberry-dacplus ++Info: Configures the HifiBerry DAC+ audio card ++Load: dtoverlay=hifiberry-dacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force DAC+ Pro into slave mode, using Pi as ++ master for bit clock and frame clock. ++ ++ ++Name: hifiberry-digi ++Info: Configures the HifiBerry Digi and Digi+ audio card ++Load: dtoverlay=hifiberry-digi ++Params: ++ ++ ++Name: hifiberry-digi-pro ++Info: Configures the HifiBerry Digi+ Pro audio card ++Load: dtoverlay=hifiberry-digi-pro ++Params: ++ ++ ++Name: hy28a ++Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics ++ Default values match Texy's display shield ++Load: dtoverlay=hy28a,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ resetgpio GPIO used to reset controller ++ ++ ledgpio GPIO used to control backlight ++ ++ ++Name: hy28b ++Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics ++ Default values match Texy's display shield ++Load: dtoverlay=hy28b,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ resetgpio GPIO used to reset controller ++ ++ ledgpio GPIO used to control backlight ++ ++ ++Name: i2c-bcm2708 ++Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. ++Load: dtoverlay=i2c-bcm2708 ++Params: ++ ++ ++Name: i2c-gpio ++Info: Adds support for software i2c controller on gpio pins ++Load: dtoverlay=i2c-gpio,= ++Params: i2c_gpio_sda GPIO used for I2C data (default "23") ++ ++ i2c_gpio_scl GPIO used for I2C clock (default "24") ++ ++ i2c_gpio_delay_us Clock delay in microseconds ++ (default "2" = ~100kHz) ++ ++ ++Name: i2c-mux ++Info: Adds support for a number of I2C bus multiplexers on i2c_arm ++Load: dtoverlay=i2c-mux,= ++Params: pca9542 Select the NXP PCA9542 device ++ ++ pca9545 Select the NXP PCA9545 device ++ ++ pca9548 Select the NXP PCA9548 device ++ ++ addr Change I2C address of the device (default 0x70) ++ ++ ++[ The i2c-mux-pca9548a overlay has been deleted. See i2c-mux. ] ++ ++ ++Name: i2c-pwm-pca9685a ++Info: Adds support for an NXP PCA9685A I2C PWM controller on i2c_arm ++Load: dtoverlay=i2c-pwm-pca9685a,= ++Params: addr I2C address of PCA9685A (default 0x40) ++ ++ ++Name: i2c-rtc ++Info: Adds support for a number of I2C Real Time Clock devices ++Load: dtoverlay=i2c-rtc,= ++Params: abx80x Select one of the ABx80x family: ++ AB0801, AB0803, AB0804, AB0805, ++ AB1801, AB1803, AB1804, AB1805 ++ ++ ds1307 Select the DS1307 device ++ ++ ds1339 Select the DS1339 device ++ ++ ds3231 Select the DS3231 device ++ ++ mcp7940x Select the MCP7940x device ++ ++ mcp7941x Select the MCP7941x device ++ ++ pcf2127 Select the PCF2127 device ++ ++ pcf8523 Select the PCF8523 device ++ ++ pcf8563 Select the PCF8563 device ++ ++ trickle-diode-type Diode type for trickle charge - "standard" or ++ "schottky" (ABx80x only) ++ ++ trickle-resistor-ohms Resistor value for trickle charge (DS1339, ++ ABx80x) ++ ++ wakeup-source Specify that the RTC can be used as a wakeup ++ source ++ ++ ++Name: i2c-sensor ++Info: Adds support for a number of I2C barometric pressure and temperature ++ sensors on i2c_arm ++Load: dtoverlay=i2c-sensor,= ++Params: bmp085 Select the Bosch sensortronic BMP085 ++ ++ bmp280 Select the Bosch sensortronic BMP280 ++ ++ ++Name: i2c0-bcm2708 ++Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations ++ are usable on all platforms. ++Load: dtoverlay=i2c0-bcm2708,= ++Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) ++ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) ++ pins_0_1 Use pins 0 and 1 (default) ++ pins_28_29 Use pins 28 and 29 ++ pins_44_45 Use pins 44 and 45 ++ pins_46_47 Use pins 46 and 47 ++ ++ ++Name: i2c1-bcm2708 ++Info: Enable the i2c_bcm2708 driver for the i2c1 bus ++Load: dtoverlay=i2c1-bcm2708,= ++Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) ++ scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) ++ pin_func Alternative pin function (4 (alt0), 6 (alt2) - ++ default 4) ++ ++ ++Name: i2s-gpio28-31 ++Info: move I2S function block to GPIO 28 to 31 ++Load: dtoverlay=i2s-gpio28-31 ++Params: ++ ++ ++Name: iqaudio-dac ++Info: Configures the IQaudio DAC audio card ++Load: dtoverlay=iqaudio-dac, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=iqaudio-dac,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: iqaudio-dacplus ++Info: Configures the IQaudio DAC+ audio card ++Load: dtoverlay=iqaudio-dacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=iqaudio-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ auto_mute_amp If specified, unmute/mute the IQaudIO amp when ++ starting/stopping audio playback. ++ unmute_amp If specified, unmute the IQaudIO amp once when ++ the DAC driver module loads. ++ ++ ++Name: iqaudio-digi-wm8804-audio ++Info: Configures the IQAudIO Digi WM8804 audio card ++Load: dtoverlay=iqaudio-digi-wm8804-audio,= ++Params: card_name Override the default, "IQAudIODigi", card name. ++ dai_name Override the default, "IQAudIO Digi", dai name. ++ dai_stream_name Override the default, "IQAudIO Digi HiFi", ++ dai stream name. ++ ++ ++Name: justboom-dac ++Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio ++ cards ++Load: dtoverlay=justboom-dac,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=justboom-dac,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: justboom-digi ++Info: Configures the JustBoom Digi HAT and Digi Zero audio cards ++Load: dtoverlay=justboom-digi ++Params: ++ ++ ++Name: lirc-rpi ++Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) ++ Consult the module documentation for more details. ++Load: dtoverlay=lirc-rpi,= ++Params: gpio_out_pin GPIO for output (default "17") ++ ++ gpio_in_pin GPIO for input (default "18") ++ ++ gpio_in_pull Pull up/down/off on the input pin ++ (default "down") ++ ++ sense Override the IR receive auto-detection logic: ++ "0" = force active-high ++ "1" = force active-low ++ "-1" = use auto-detection ++ (default "-1") ++ ++ softcarrier Turn the software carrier "on" or "off" ++ (default "on") ++ ++ invert "on" = invert the output pin (default "off") ++ ++ debug "on" = enable additional debug messages ++ (default "off") ++ ++ ++Name: mcp23017 ++Info: Configures the MCP23017 I2C GPIO expander ++Load: dtoverlay=mcp23017,= ++Params: gpiopin Gpio pin connected to the INTA output of the ++ MCP23017 (default: 4) ++ ++ addr I2C address of the MCP23017 (default: 0x20) ++ ++ ++Name: mcp23s17 ++Info: Configures the MCP23S08/17 SPI GPIO expanders. ++ If devices are present on SPI1 or SPI2, those interfaces must be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ If interrupts are enabled for a device on a given CS# on a SPI bus, that ++ device must be the only one present on that SPI bus/CS#. ++Load: dtoverlay=mcp23s17,= ++Params: s08-spi--present 4-bit integer, bitmap indicating MCP23S08 ++ devices present on SPI, CS# ++ ++ s17-spi--present 8-bit integer, bitmap indicating MCP23S17 ++ devices present on SPI, CS# ++ ++ s08-spi--int-gpio integer, enables interrupts on a single ++ MCP23S08 device on SPI, CS#, specifies ++ the GPIO pin to which INT output of MCP23S08 ++ is connected. ++ ++ s17-spi--int-gpio integer, enables mirrored interrupts on a ++ single MCP23S17 device on SPI, CS#, ++ specifies the GPIO pin to which either INTA ++ or INTB output of MCP23S17 is connected. ++ ++ ++Name: mcp2515-can0 ++Info: Configures the MCP2515 CAN controller on spi0.0 ++Load: dtoverlay=mcp2515-can0,= ++Params: oscillator Clock frequency for the CAN controller (Hz) ++ ++ spimaxfrequency Maximum SPI frequence (Hz) ++ ++ interrupt GPIO for interrupt signal ++ ++ ++Name: mcp2515-can1 ++Info: Configures the MCP2515 CAN controller on spi0.1 ++Load: dtoverlay=mcp2515-can1,= ++Params: oscillator Clock frequency for the CAN controller (Hz) ++ ++ spimaxfrequency Maximum SPI frequence (Hz) ++ ++ interrupt GPIO for interrupt signal ++ ++ ++Name: midi-uart0 ++Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets ++ 31.25kbaud, the frequency required for MIDI ++Load: dtoverlay=midi-uart0 ++Params: ++ ++ ++Name: mmc ++Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock ++Load: dtoverlay=mmc,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ ++Name: mz61581 ++Info: MZ61581 display by Tontec ++Load: dtoverlay=mz61581,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ txbuflen Transmit buffer length (default 32768) ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: pi3-act-led ++Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed ++ from the VPU. There is a special driver for this with a separate DT ++ node, which has the unfortunate consequence of breaking the ++ act_led_gpio and act_led_activelow dtparams. ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++Load: dtoverlay=pi3-act-led,= ++Params: activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ ++ gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ REQUIRED ++ ++ ++Name: pi3-disable-bt ++Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=pi3-disable-bt ++Params: ++ ++ ++Name: pi3-miniuart-bt ++Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service ++ and replace ttyAMA0 with ttyS0, unless you have a system with udev rules ++ that create /dev/serial0 and /dev/serial1, in which case use ++ /dev/serial1 instead because it will always be correct. Furthermore, ++ you must also set core_freq=250 in config.txt or the miniuart will not ++ work. ++Load: dtoverlay=pi3-miniuart-bt ++Params: ++ ++ ++Name: piscreen ++Info: PiScreen display by OzzMaker.com ++Load: dtoverlay=piscreen,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++Name: piscreen2r ++Info: PiScreen 2 with resistive TP display by OzzMaker.com ++Load: dtoverlay=piscreen2r,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++Name: pisound ++Info: Configures the Blokas Labs pisound card ++Load: dtoverlay=pisound ++Params: ++ ++ ++Name: pitft22 ++Info: Adafruit PiTFT 2.2" screen ++Load: dtoverlay=pitft22,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pitft28-capacitive ++Info: Adafruit PiTFT 2.8" capacitive touch screen ++Load: dtoverlay=pitft28-capacitive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ touch-sizex Touchscreen size x (default 240) ++ ++ touch-sizey Touchscreen size y (default 320) ++ ++ touch-invx Touchscreen inverted x axis ++ ++ touch-invy Touchscreen inverted y axis ++ ++ touch-swapxy Touchscreen swapped x y axis ++ ++ ++Name: pitft28-resistive ++Info: Adafruit PiTFT 2.8" resistive touch screen ++Load: dtoverlay=pitft28-resistive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pitft35-resistive ++Info: Adafruit PiTFT 3.5" resistive touch screen ++Load: dtoverlay=pitft35-resistive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pps-gpio ++Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). ++Load: dtoverlay=pps-gpio,= ++Params: gpiopin Input GPIO (default "18") ++ assert_falling_edge When present, assert is indicated by a falling ++ edge, rather than by a rising edge ++ ++ ++Name: pwm ++Info: Configures a single PWM channel ++ Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++ 4) Currently the clock must have been enabled and configured ++ by other means. ++Load: dtoverlay=pwm,= ++Params: pin Output pin (default 18) - see table ++ func Pin function (default 2 = Alt5) - see above ++ clock PWM clock frequency (informational) ++ ++ ++Name: pwm-2chan ++Info: Configures both PWM channels ++ Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++ 4) Currently the clock must have been enabled and configured ++ by other means. ++Load: dtoverlay=pwm-2chan,= ++Params: pin Output pin (default 18) - see table ++ pin2 Output pin for other channel (default 19) ++ func Pin function (default 2 = Alt5) - see above ++ func2 Function for pin2 (default 2 = Alt5) ++ clock PWM clock frequency (informational) ++ ++ ++Name: qca7000 ++Info: I2SE's Evaluation Board for PLC Stamp micro ++Load: dtoverlay=qca7000,= ++Params: int_pin GPIO pin for interrupt signal (default 23) ++ ++ speed SPI bus speed (default 12 MHz) ++ ++ ++Name: raspidac3 ++Info: Configures the RaspiDAV Rev.3x audio card ++Load: dtoverlay=raspidac3 ++Params: ++ ++ ++Name: rpi-backlight ++Info: Raspberry Pi official display backlight driver ++Load: dtoverlay=rpi-backlight ++Params: ++ ++ ++Name: rpi-dac ++Info: Configures the RPi DAC audio card ++Load: dtoverlay=rpi-dac ++Params: ++ ++ ++Name: rpi-display ++Info: RPi-Display - 2.8" Touch Display by Watterott ++Load: dtoverlay=rpi-display,= ++Params: speed Display SPI bus speed ++ rotate Display rotation {0,90,180,270} ++ fps Delay between frame updates ++ debug Debug output level {0-7} ++ xohms Touchpanel sensitivity (X-plate resistance) ++ swapxy Swap x and y axis ++ ++ ++Name: rpi-ft5406 ++Info: Official Raspberry Pi display touchscreen ++Load: dtoverlay=rpi-ft5406 ++Params: ++ ++ ++Name: rpi-proto ++Info: Configures the RPi Proto audio card ++Load: dtoverlay=rpi-proto ++Params: ++ ++ ++Name: rpi-sense ++Info: Raspberry Pi Sense HAT ++Load: dtoverlay=rpi-sense ++Params: ++ ++ ++Name: rra-digidac1-wm8741-audio ++Info: Configures the Red Rocks Audio DigiDAC1 soundcard ++Load: dtoverlay=rra-digidac1-wm8741-audio ++Params: ++ ++ ++Name: sc16is750-i2c ++Info: Overlay for the NXP SC16IS750 UART with I2C Interface ++ Enables the chip on I2C1 at 0x48. To select another address, ++ please refer to table 10 in reference manual. ++ ++Load: dtoverlay=sc16is750-i2c,= ++Params: int_pin GPIO used for IRQ (default 24) ++ addr Address (default 0x48) ++ ++ ++Name: sc16is752-spi1 ++Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface ++ Enables the chip on SPI1. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++ ++Load: dtoverlay=sc16is752-spi1,= ++Params: int_pin GPIO used for IRQ (default 24) ++ ++ ++Name: sdhost ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock. ++ N.B. This overlay is designed for situations where the mmc driver is ++ the default, so it disables the other (mmc) interface - this will kill ++ WiFi on a Pi3. If this isn't what you want, either use the sdtweak ++ overlay or the new sd_* dtparams of the base DTBs. ++Load: dtoverlay=sdhost,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ ++Name: sdio ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, ++ and enables SDIO via GPIOs 22-27. ++Load: dtoverlay=sdio,= ++Params: overclock_50 SD Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sdio_overclock SDIO Clock (in MHz) to use when the MMC ++ framework requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ poll_once Disable SDIO-device polling every second ++ (default on: polling once at boot-time) ++ ++ bus_width Set the SDIO host bus width (default 4 bits) ++ ++ ++Name: sdio-1bit ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, ++ and enables 1-bit SDIO via GPIOs 22-25. ++Load: dtoverlay=sdio-1bit,= ++Params: overclock_50 SD Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sdio_overclock SDIO Clock (in MHz) to use when the MMC ++ framework requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ poll_once Disable SDIO-device polling every second ++ (default on: polling once at boot-time) ++ ++ ++Name: sdtweak ++Info: Tunes the bcm2835-sdhost SD/MMC driver ++ N.B. This functionality is now available via the sd_* dtparams in the ++ base DTB. ++Load: dtoverlay=sdtweak,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ ++Name: smi ++Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! ++Load: dtoverlay=smi ++Params: ++ ++ ++Name: smi-dev ++Info: Enables the userspace interface for the SMI driver ++Load: dtoverlay=smi-dev ++Params: ++ ++ ++Name: smi-nand ++Info: Enables access to NAND flash via the SMI interface ++Load: dtoverlay=smi-nand ++Params: ++ ++ ++Name: spi-gpio35-39 ++Info: move SPI function block to GPIO 35 to 39 ++Load: dtoverlay=spi-gpio35-39 ++Params: ++ ++ ++Name: spi-rtc ++Info: Adds support for a number of SPI Real Time Clock devices ++Load: dtoverlay=spi-rtc,= ++Params: pcf2123 Select the PCF2123 device ++ ++ ++Name: spi0-hw-cs ++Info: Re-enables hardware CS/CE (chip selects) for SPI0 ++Load: dtoverlay=spi0-hw-cs ++Params: ++ ++ ++Name: spi1-1cs ++Info: Enables spi1 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi1-2cs ++Info: Enables spi1 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.1 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi1-3cs ++Info: Enables spi1 with three chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-3cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). ++ cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.1 (default ++ is 'okay' or enabled). ++ cs2_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.2 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-1cs ++Info: Enables spi2 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-2cs ++Info: Enables spi2 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.1 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-3cs ++Info: Enables spi2 with three chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-3cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). ++ cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.1 (default ++ is 'okay' or enabled). ++ cs2_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.2 (default ++ is 'okay' or enabled). ++ ++ ++Name: tinylcd35 ++Info: 3.5" Color TFT Display by www.tinylcd.com ++ Options: Touch, RTC, keypad ++Load: dtoverlay=tinylcd35,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ touch Enable touch panel ++ ++ touchgpio Touch controller IRQ GPIO ++ ++ xohms Touchpanel: Resistance of X-plate in ohms ++ ++ rtc-pcf PCF8563 Real Time Clock ++ ++ rtc-ds DS1307 Real Time Clock ++ ++ keypad Enable keypad ++ ++ Examples: ++ Display with touchpanel, PCF8563 RTC and keypad: ++ dtoverlay=tinylcd35,touch,rtc-pcf,keypad ++ Old touch display: ++ dtoverlay=tinylcd35,touch,touchgpio=3 ++ ++ ++Name: uart1 ++Info: Enable uart1 in place of uart0 ++Load: dtoverlay=uart1,= ++Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) ++ ++ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) ++ ++ ++Name: vc4-fkms-v3d ++Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx ++ display stack. ++Load: dtoverlay=vc4-fkms-v3d, ++Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) ++ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) ++ cma-128 CMA is 128MB, 128MB-aligned ++ cma-96 CMA is 96MB, 128MB-aligned ++ cma-64 CMA is 64MB, 64MB-aligned ++ ++ ++Name: vc4-kms-v3d ++Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or ++ booting to GUI while this overlay is in use will cause interesting ++ lockups. ++Load: dtoverlay=vc4-kms-v3d, ++Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) ++ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) ++ cma-128 CMA is 128MB, 128MB-aligned ++ cma-96 CMA is 96MB, 128MB-aligned ++ cma-64 CMA is 64MB, 64MB-aligned ++ ++ ++Name: vga666 ++Info: Overlay for the Fen Logic VGA666 board ++ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds ++ after the kernel has started. ++Load: dtoverlay=vga666 ++Params: ++ ++ ++Name: w1-gpio ++Info: Configures the w1-gpio Onewire interface module. ++ Use this overlay if you *don't* need a GPIO to drive an external pullup. ++Load: dtoverlay=w1-gpio,= ++Params: gpiopin GPIO for I/O (default "4") ++ ++ pullup Non-zero, "on", or "y" to enable the parasitic ++ power (2-wire, power-on-data) feature ++ ++ ++Name: w1-gpio-pullup ++Info: Configures the w1-gpio Onewire interface module. ++ Use this overlay if you *do* need a GPIO to drive an external pullup. ++Load: dtoverlay=w1-gpio-pullup,= ++Params: gpiopin GPIO for I/O (default "4") ++ ++ pullup Non-zero, "on", or "y" to enable the parasitic ++ power (2-wire, power-on-data) feature ++ ++ extpullup GPIO for external pullup (default "5") ++ ++ ++Name: wittypi ++Info: Configures the wittypi RTC module. ++Load: dtoverlay=wittypi,= ++Params: led_gpio GPIO for LED (default "17") ++ led_trigger Choose which activity the LED tracks (default ++ "default-on") ++ ++ ++Troubleshooting ++=============== ++ ++If you are experiencing problems that you think are DT-related, enable DT ++diagnostic output by adding this to /boot/config.txt: ++ ++ dtdebug=on ++ ++and rebooting. Then run: ++ ++ sudo vcdbg log msg ++ ++and look for relevant messages. ++ ++Further reading ++=============== ++ ++This is only meant to be a quick introduction to the subject of Device Tree on ++Raspberry Pi. There is a more complete explanation here: ++ ++http://www.raspberrypi.org/documentation/configuration/device-tree.md +diff --git a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +new file mode 100644 +index 000000000000..24fcd58fd1dc +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +@@ -0,0 +1,53 @@ ++// Definitions for ADAU1977 ADC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&soc>; ++ ++ __overlay__ { ++ codec_supply: fixedregulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "AVDD"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c>; ++ ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ adau1977: codec@11 { ++ compatible = "adi,adau1977"; ++ reg = <0x11>; ++ reset-gpios = <&gpio 5 0>; ++ AVDD-supply = <&codec_supply>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "adi,adau1977-adc"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/ads1015-overlay.dts b/arch/arm/boot/dts/overlays/ads1015-overlay.dts +new file mode 100644 +index 000000000000..02b9de46299b +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts +@@ -0,0 +1,98 @@ ++/* ++ * 2016 - Erik Sejr ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ /* ----------- ADS1015 ------------ */ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ads1015: ads1015 { ++ compatible = "ti,ads1015"; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x48>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "i2c_arm/ads1015"; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_a: channel_a { ++ reg = <4>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_b: channel_b { ++ reg = <5>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_c: channel_c { ++ reg = <6>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_d: channel_d { ++ reg = <7>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ addr = <&ads1015>,"reg:0"; ++ cha_enable = <0>,"=1"; ++ cha_cfg = <&channel_a>,"reg:0"; ++ cha_gain = <&channel_a>,"ti,gain:0"; ++ cha_datarate = <&channel_a>,"ti,datarate:0"; ++ chb_enable = <0>,"=2"; ++ chb_cfg = <&channel_b>,"reg:0"; ++ chb_gain = <&channel_b>,"ti,gain:0"; ++ chb_datarate = <&channel_b>,"ti,datarate:0"; ++ chc_enable = <0>,"=3"; ++ chc_cfg = <&channel_c>,"reg:0"; ++ chc_gain = <&channel_c>,"ti,gain:0"; ++ chc_datarate = <&channel_c>,"ti,datarate:0"; ++ chd_enable = <0>,"=4"; ++ chd_cfg = <&channel_d>,"reg:0"; ++ chd_gain = <&channel_d>,"ti,gain:0"; ++ chd_datarate = <&channel_d>,"ti,datarate:0"; ++ }; ++ ++}; +diff --git a/arch/arm/boot/dts/overlays/ads7846-overlay.dts b/arch/arm/boot/dts/overlays/ads7846-overlay.dts +new file mode 100644 +index 000000000000..edf2dc9d5d5f +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * Generic Device Tree overlay for the ADS7846 touch controller ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ ads7846_pins: ads7846_pins { ++ brcm,pins = <255>; /* illegal default value */ ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ads7846: ads7846@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ads7846_pins>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <255 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 255 0>; ++ ++ /* driver defaults */ ++ ti,x-min = /bits/ 16 <0>; ++ ti,y-min = /bits/ 16 <0>; ++ ti,x-max = /bits/ 16 <0x0FFF>; ++ ti,y-max = /bits/ 16 <0x0FFF>; ++ ti,pressure-min = /bits/ 16 <0>; ++ ti,pressure-max = /bits/ 16 <0xFFFF>; ++ ti,x-plate-ohms = /bits/ 16 <400>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ cs = <&ads7846>,"reg:0"; ++ speed = <&ads7846>,"spi-max-frequency:0"; ++ penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */ ++ <&ads7846>,"interrupts:0", ++ <&ads7846>,"pendown-gpio:4"; ++ penirq_pull = <&ads7846_pins>,"brcm,pull:0"; ++ swapxy = <&ads7846>,"ti,swap-xy?"; ++ xmin = <&ads7846>,"ti,x-min;0"; ++ ymin = <&ads7846>,"ti,y-min;0"; ++ xmax = <&ads7846>,"ti,x-max;0"; ++ ymax = <&ads7846>,"ti,y-max;0"; ++ pmin = <&ads7846>,"ti,pressure-min;0"; ++ pmax = <&ads7846>,"ti,pressure-max;0"; ++ xohms = <&ads7846>,"ti,x-plate-ohms;0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +new file mode 100644 +index 000000000000..208849d5c392 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +@@ -0,0 +1,46 @@ ++// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ card_name = "Akkordion"; ++ dai_name = "IQaudIO DAC"; ++ dai_stream_name = "IQaudIO DAC HiFi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +new file mode 100644 +index 000000000000..a5468d850a91 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +@@ -0,0 +1,54 @@ ++/* ++ * Definitions for Allo Piano DAC (2.0/2.1) boards ++ * ++ * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo ++ * (left/right) and the other provides a subwoofer output, using DSP on the ++ * chip for digital high/low pass crossover. ++ * The initial support for this hardware, that doesn't require any codec driver ++ * modifications, uses only one DAC chip for stereo (left/right) output, the ++ * chip with 0x4c slave address. The other chip at 0x4d is currently ignored! ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5142@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5142"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ piano_dac: __overlay__ { ++ compatible = "allo,piano-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&piano_dac>,"allo,24db_digital_gain?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts +new file mode 100644 +index 000000000000..880c7539d496 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ lowpan0: at86rf233@0 { ++ compatible = "atmel,at86rf233"; ++ reg = <0>; ++ interrupt-parent = <&gpio>; ++ interrupts = <23 4>; /* active high */ ++ reset-gpio = <&gpio 24 1>; ++ sleep-gpio = <&gpio 25 1>; ++ spi-max-frequency = <3000000>; ++ xtal-trim = /bits/ 8 <0xf>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ lowpan0_pins: lowpan0_pins { ++ brcm,pins = <23 24 25>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ interrupt = <&lowpan0>, "interrupts:0", ++ <&lowpan0_pins>, "brcm,pins:0"; ++ reset = <&lowpan0>, "reset-gpio:4", ++ <&lowpan0_pins>, "brcm,pins:4"; ++ sleep = <&lowpan0>, "sleep-gpio:4", ++ <&lowpan0_pins>, "brcm,pins:8"; ++ speed = <&lowpan0>, "spi-max-frequency:0"; ++ trim = <&lowpan0>, "xtal-trim.0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +new file mode 100644 +index 000000000000..4ed66577fa1d +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for audioinjector.net audio add on soundcard ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8731@1a { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8731"; ++ reg = <0x1a>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "ai,audioinjector-pi-soundcard"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/audremap-overlay.dts b/arch/arm/boot/dts/overlays/audremap-overlay.dts +new file mode 100644 +index 000000000000..9582d6ab3121 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts +@@ -0,0 +1,19 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&audio_pins>; ++ frag0: __overlay__ { ++ brcm,pins = < 12 13 >; ++ brcm,function = < 4 >; /* alt0 alt0 */ ++ }; ++ }; ++ ++ __overrides__ { ++ swap_lr = <&frag0>, "swap_lr?"; ++ enable_jack = <&frag0>, "enable_jack?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts +new file mode 100644 +index 000000000000..782b1715467e +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts +@@ -0,0 +1,23 @@ ++// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dht11-overlay.dts b/arch/arm/boot/dts/overlays/dht11-overlay.dts +new file mode 100644 +index 000000000000..9bf67fd57bad +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts +@@ -0,0 +1,39 @@ ++/* ++ * Overlay for the DHT11/21/22 humidity/temperature sensor modules. ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ dht11: dht11@0 { ++ compatible = "dht11"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dht11_pins>; ++ gpios = <&gpio 4 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dht11_pins: dht11_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; // in ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&dht11_pins>,"brcm,pins:0", ++ <&dht11>,"gpios:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts +new file mode 100644 +index 000000000000..3930f412bca4 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for Dion Audio LOCO DAC-AMP ++ ++/* ++ * PCM5242 DAC (in hardware mode) and TPA3118 AMP. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "dionaudio,loco-pcm5242-tpa3118"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dpi18-overlay.dts b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +new file mode 100644 +index 000000000000..8098d5e28a71 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +@@ -0,0 +1,31 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no DPI driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi18_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dpi18_pins: dpi18_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 20 ++ 21>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dpi24-overlay.dts b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +new file mode 100644 +index 000000000000..e4dbe40218a0 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +@@ -0,0 +1,31 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no DPI driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi24_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dpi24_pins: dpi24_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 20 ++ 21 22 23 24 25 26 27>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts +new file mode 100644 +index 000000000000..fc48bd1eac60 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts +@@ -0,0 +1,20 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&usb>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ __overlay__ { ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupts = <2 0>, ++ <1 9>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/dwc2-overlay.dts b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +new file mode 100644 +index 000000000000..527abc9f0ddf +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +@@ -0,0 +1,29 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&usb>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ dwc2_usb: __overlay__ { ++ compatible = "brcm,bcm2835-usb"; ++ reg = <0x7e980000 0x10000>; ++ interrupts = <1 9>; ++ dr_mode = "otg"; ++ g-np-tx-fifo-size = <32>; ++ g-rx-fifo-size = <256>; ++ g-tx-fifo-size = <256 128 128 64 64 64 32>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ dr_mode = <&dwc2_usb>, "dr_mode"; ++ g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0"; ++ g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0"; ++ g-tx-fifo-size = <&dwc2_usb>,"g-tx-fifo-size:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/enc28j60-overlay.dts b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts +new file mode 100644 +index 000000000000..db8a8feed94c +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts +@@ -0,0 +1,53 @@ ++// Overlay for the Microchip ENC28J60 Ethernet Controller ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ eth1: enc28j60@0{ ++ compatible = "microchip,enc28j60"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; /* falling edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +new file mode 100644 +index 000000000000..946c9d2107a8 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +@@ -0,0 +1,47 @@ ++// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module ++// Interrupt pin: 39 ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi2>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ eth1: enc28j60@0{ ++ compatible = "microchip,enc28j60"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <39 0x2>; /* falling edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <39>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts +new file mode 100644 +index 000000000000..af5baf7ddc92 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts +@@ -0,0 +1,44 @@ ++// Definitions for ir-gpio module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ gpio_ir: ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ ++ // pin number, high or low ++ gpios = <&gpio 18 1>; ++ ++ // parameter for keymap name ++ linux,rc-map-name = "rc-rc6-mce"; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ gpio_ir_pins: gpio_ir_pins { ++ brcm,pins = <18>; // pin 18 ++ brcm,function = <0>; // in ++ brcm,pull = <1>; // down ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ // parameters ++ gpio_pin = <&gpio_ir>,"gpios:4", ++ <&gpio_ir_pins>,"brcm,pins:0"; // pin number ++ gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state ++ ++ rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts +new file mode 100644 +index 000000000000..ff8cb36d94d4 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for gpio-poweroff module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ power_ctrl: power_ctrl { ++ compatible = "gpio-poweroff"; ++ gpios = <&gpio 26 0>; ++ force; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ power_ctrl_pins: power_ctrl_pins { ++ brcm,pins = <26>; ++ brcm,function = <1>; // out ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&power_ctrl>,"gpios:4", ++ <&power_ctrl_pins>,"brcm,pins:0"; ++ active_low = <&power_ctrl>,"gpios:8"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts +new file mode 100644 +index 000000000000..5f5785534fd3 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for HiFiBerry Amp/Amp+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ tas5713@1b { ++ #sound-dai-cells = <0>; ++ compatible = "ti,tas5713"; ++ reg = <0x1b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-amp"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts +new file mode 100644 +index 000000000000..0b74fdc6e0f6 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for HiFiBerry DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +new file mode 100644 +index 000000000000..2f078d4747cc +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -0,0 +1,56 @@ ++// Definitions for HiFiBerry DAC+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ dacpro_osc: dacpro_osc { ++ compatible = "hifiberry,dacpro-clk"; ++ #clock-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ clocks = <&dacpro_osc>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ hifiberry_dacplus: __overlay__ { ++ compatible = "hifiberry,hifiberry-dacplus"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; ++ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +new file mode 100644 +index 000000000000..f5e41f48ba4f +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for HiFiBerry Digi ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +new file mode 100644 +index 000000000000..2a26d9cfffb0 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +@@ -0,0 +1,41 @@ ++// Definitions for HiFiBerry Digi Pro ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ clock44-gpio = <&gpio 5 0>; ++ clock48-gpio = <&gpio 6 0>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hy28a-overlay.dts b/arch/arm/boot/dts/overlays/hy28a-overlay.dts +new file mode 100644 +index 000000000000..ac0f3c28ea85 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts +@@ -0,0 +1,93 @@ ++/* ++ * Device Tree overlay for HY28A display ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ hy28a_pins: hy28a_pins { ++ brcm,pins = <17 25 18>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hy28a: hy28a@0{ ++ compatible = "ilitek,ili9320"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hy28a_pins>; ++ ++ spi-max-frequency = <32000000>; ++ spi-cpol; ++ spi-cpha; ++ rotate = <270>; ++ bgr; ++ fps = <50>; ++ buswidth = <8>; ++ startbyte = <0x70>; ++ reset-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ }; ++ ++ hy28a_ts: hy28a-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&hy28a>,"spi-max-frequency:0"; ++ rotate = <&hy28a>,"rotate:0"; ++ fps = <&hy28a>,"fps:0"; ++ debug = <&hy28a>,"debug:0"; ++ xohms = <&hy28a_ts>,"ti,x-plate-ohms;0"; ++ resetgpio = <&hy28a>,"reset-gpios:4", ++ <&hy28a_pins>, "brcm,pins:1"; ++ ledgpio = <&hy28a>,"led-gpios:4", ++ <&hy28a_pins>, "brcm,pins:2"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/hy28b-overlay.dts b/arch/arm/boot/dts/overlays/hy28b-overlay.dts +new file mode 100644 +index 000000000000..8018aebde8e5 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts +@@ -0,0 +1,148 @@ ++/* ++ * Device Tree overlay for HY28b display shield by Texy ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ hy28b_pins: hy28b_pins { ++ brcm,pins = <17 25 18>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hy28b: hy28b@0{ ++ compatible = "ilitek,ili9325"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hy28b_pins>; ++ ++ spi-max-frequency = <48000000>; ++ spi-cpol; ++ spi-cpha; ++ rotate = <270>; ++ bgr; ++ fps = <50>; ++ buswidth = <8>; ++ startbyte = <0x70>; ++ reset-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 1>; ++ ++ gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; ++ ++ init = <0x10000e7 0x0010 ++ 0x1000000 0x0001 ++ 0x1000001 0x0100 ++ 0x1000002 0x0700 ++ 0x1000003 0x1030 ++ 0x1000004 0x0000 ++ 0x1000008 0x0207 ++ 0x1000009 0x0000 ++ 0x100000a 0x0000 ++ 0x100000c 0x0001 ++ 0x100000d 0x0000 ++ 0x100000f 0x0000 ++ 0x1000010 0x0000 ++ 0x1000011 0x0007 ++ 0x1000012 0x0000 ++ 0x1000013 0x0000 ++ 0x2000032 ++ 0x1000010 0x1590 ++ 0x1000011 0x0227 ++ 0x2000032 ++ 0x1000012 0x009c ++ 0x2000032 ++ 0x1000013 0x1900 ++ 0x1000029 0x0023 ++ 0x100002b 0x000e ++ 0x2000032 ++ 0x1000020 0x0000 ++ 0x1000021 0x0000 ++ 0x2000032 ++ 0x1000050 0x0000 ++ 0x1000051 0x00ef ++ 0x1000052 0x0000 ++ 0x1000053 0x013f ++ 0x1000060 0xa700 ++ 0x1000061 0x0001 ++ 0x100006a 0x0000 ++ 0x1000080 0x0000 ++ 0x1000081 0x0000 ++ 0x1000082 0x0000 ++ 0x1000083 0x0000 ++ 0x1000084 0x0000 ++ 0x1000085 0x0000 ++ 0x1000090 0x0010 ++ 0x1000092 0x0000 ++ 0x1000093 0x0003 ++ 0x1000095 0x0110 ++ 0x1000097 0x0000 ++ 0x1000098 0x0000 ++ 0x1000007 0x0133 ++ 0x1000020 0x0000 ++ 0x1000021 0x0000 ++ 0x2000064>; ++ debug = <0>; ++ }; ++ ++ hy28b_ts: hy28b-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&hy28b>,"spi-max-frequency:0"; ++ rotate = <&hy28b>,"rotate:0"; ++ fps = <&hy28b>,"fps:0"; ++ debug = <&hy28b>,"debug:0"; ++ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; ++ resetgpio = <&hy28b>,"reset-gpios:4", ++ <&hy28b_pins>, "brcm,pins:1"; ++ ledgpio = <&hy28b>,"led-gpios:4", ++ <&hy28b_pins>, "brcm,pins:2"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts +new file mode 100644 +index 000000000000..0afc6b405414 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts +@@ -0,0 +1,13 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts +new file mode 100644 +index 000000000000..b72b32e93677 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts +@@ -0,0 +1,43 @@ ++// Overlay for i2c_gpio bitbanging host bus. ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ i2c_gpio: i2c@0 { ++ compatible = "i2c-gpio"; ++ gpios = <&gpio 23 0 /* sda */ ++ &gpio 24 0 /* scl */ ++ >; ++ i2c-gpio,delay-us = <2>; /* ~100 kHz */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/aliases"; ++ __overlay__ { ++ i2c_gpio = "/i2c@0"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/__symbols__"; ++ __overlay__ { ++ i2c_gpio = "/i2c@0"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; ++ i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; ++ i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; ++ }; ++}; ++ +diff --git a/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts +new file mode 100644 +index 000000000000..976d38e78153 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts +@@ -0,0 +1,139 @@ ++// Umbrella I2C Mux overlay ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9542: mux@70 { ++ compatible = "nxp,pca9542"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9545: mux@70 { ++ compatible = "nxp,pca9545"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ }; ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9548: mux@70 { ++ compatible = "nxp,pca9548"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ }; ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ }; ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ }; ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ }; ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ }; ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ }; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ pca9542 = <0>, "+0"; ++ pca9545 = <0>, "+1"; ++ pca9548 = <0>, "+2"; ++ ++ addr = <&pca9542>,"reg:0", ++ <&pca9545>,"reg:0", ++ <&pca9548>,"reg:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +new file mode 100644 +index 000000000000..d1ffd2326669 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +@@ -0,0 +1,26 @@ ++// Definitions for NXP PCA9685A I2C PWM controller on ARM I2C bus. ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca: pca@40 { ++ compatible = "nxp,pca9685"; ++ #pwm-cells = <2>; ++ reg = <0x40>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ __overrides__ { ++ addr = <&pca>,"reg:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +new file mode 100644 +index 000000000000..1efcf0b712c9 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -0,0 +1,83 @@ ++// Definitions for several I2C based Real Time Clocks ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ abx80x: abx80x@69 { ++ compatible = "abracon,abx80x"; ++ reg = <0x69>; ++ abracon,tc-diode = "standard"; ++ abracon,tc-resistor = <0>; ++ status = "disable"; ++ }; ++ ds1307: ds1307@68 { ++ compatible = "maxim,ds1307"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ ds1339: ds1339@68 { ++ compatible = "dallas,ds1339"; ++ trickle-resistor-ohms = <0>; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ mcp7940x: mcp7940x@6f { ++ compatible = "microchip,mcp7940x"; ++ reg = <0x6f>; ++ status = "disable"; ++ }; ++ mcp7941x: mcp7941x@6f { ++ compatible = "microchip,mcp7941x"; ++ reg = <0x6f>; ++ status = "disable"; ++ }; ++ ds3231: ds3231@68 { ++ compatible = "maxim,ds3231"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ pcf2127: pcf2127@51 { ++ compatible = "nxp,pcf2127"; ++ reg = <0x51>; ++ status = "disable"; ++ }; ++ pcf8523: pcf8523@68 { ++ compatible = "nxp,pcf8523"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ pcf8563: pcf8563@51 { ++ compatible = "nxp,pcf8563"; ++ reg = <0x51>; ++ status = "disable"; ++ }; ++ }; ++ }; ++ __overrides__ { ++ abx80x = <&abx80x>,"status"; ++ ds1307 = <&ds1307>,"status"; ++ ds1339 = <&ds1339>,"status"; ++ ds3231 = <&ds3231>,"status"; ++ mcp7940x = <&mcp7940x>,"status"; ++ mcp7941x = <&mcp7941x>,"status"; ++ pcf2127 = <&pcf2127>,"status"; ++ pcf8523 = <&pcf8523>,"status"; ++ pcf8563 = <&pcf8563>,"status"; ++ trickle-diode-type = <&abx80x>,"abracon,tc-diode"; ++ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", ++ <&abx80x>,"abracon,tc-resistor"; ++ wakeup-source = <&ds1339>,"wakeup-source?", ++ <&ds3231>,"wakeup-source?", ++ <&mcp7940x>,"wakeup-source?", ++ <&mcp7941x>,"wakeup-source?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +new file mode 100644 +index 000000000000..f6d134c095af +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for a few digital barometric pressure and temperature sensors ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; ++ ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ bmp085 = <&bmp085>,"status"; ++ bmp280 = <&bmp280>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +new file mode 100644 +index 000000000000..1f4fc7b57060 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +@@ -0,0 +1,61 @@ ++/* ++ * Device tree overlay for i2c_bcm2708, i2c0 bus ++ * ++ * Compile: ++ * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c0_pins>; ++ frag1: __overlay__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <46 47>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ __overrides__ { ++ sda0_pin = <&frag1>,"brcm,pins:0"; ++ scl0_pin = <&frag1>,"brcm,pins:4"; ++ pins_0_1 = <0>,"+1-2-3-4"; ++ pins_28_29 = <0>,"-1+2-3-4"; ++ pins_44_45 = <0>,"-1-2+3-4"; ++ pins_46_47 = <0>,"-1-2-3+4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +new file mode 100644 +index 000000000000..e303b9c61c82 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +@@ -0,0 +1,37 @@ ++/* ++ * Device tree overlay for i2c_bcm2708, i2c1 bus ++ * ++ * Compile: ++ * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ pinctrl-0 = <&i2c1_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ sda1_pin = <&i2c1_pins>,"brcm,pins:0"; ++ scl1_pin = <&i2c1_pins>,"brcm,pins:4"; ++ pin_func = <&i2c1_pins>,"brcm,function:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts +new file mode 100644 +index 000000000000..30c356d6070c +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts +@@ -0,0 +1,18 @@ ++/* ++ * Device tree overlay to move i2s to gpio 28 to 31 on CM ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2s_pins>; ++ __overlay__ { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +new file mode 100644 +index 000000000000..0d35c85382bb +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +@@ -0,0 +1,43 @@ ++// Definitions for IQaudIO DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +new file mode 100644 +index 000000000000..d4bad8742a98 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +@@ -0,0 +1,46 @@ ++// Definitions for IQaudIO DAC+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ iqaudio_dac: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ i2s-controller = <&i2s>; ++ mute-gpios = <&gpio 22 0>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&iqaudio_dac>,"iqaudio,24db_digital_gain?"; ++ auto_mute_amp = <&iqaudio_dac>,"iqaudio-dac,auto-mute-amp?"; ++ unmute_amp = <&iqaudio_dac>,"iqaudio-dac,unmute-amp?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +new file mode 100644 +index 000000000000..da4fbfdfdbbb +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +@@ -0,0 +1,47 @@ ++// Definitions for IQAudIO Digi WM8804 audio board ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ // DVDD-supply = <®_3v3>; ++ // PVDD-supply = <®_3v3>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ wm8804_digi: __overlay__ { ++ compatible = "iqaudio,wm8804-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ card_name = <&wm8804_digi>,"wm8804-digi,card-name"; ++ dai_name = <&wm8804_digi>,"wm8804-digi,dai-name"; ++ dai_stream_name = <&wm8804_digi>,"wm8804-digi,dai-stream-name"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +new file mode 100644 +index 000000000000..312632ad376d +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +@@ -0,0 +1,43 @@ ++// Definitions for JustBoom DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "justboom,justboom-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"justboom,24db_digital_gain?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +new file mode 100644 +index 000000000000..cbbede9a5411 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for JustBoom Digi ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "justboom,justboom-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts b/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts +new file mode 100644 +index 000000000000..7d5d82bdf4c4 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts +@@ -0,0 +1,57 @@ ++// Definitions for lirc-rpi module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ lirc_rpi: lirc_rpi { ++ compatible = "rpi,lirc-rpi"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lirc_pins>; ++ status = "okay"; ++ ++ // Override autodetection of IR receiver circuit ++ // (0 = active high, 1 = active low, -1 = no override ) ++ rpi,sense = <0xffffffff>; ++ ++ // Software carrier ++ // (0 = off, 1 = on) ++ rpi,softcarrier = <1>; ++ ++ // Invert output ++ // (0 = off, 1 = on) ++ rpi,invert = <0>; ++ ++ // Enable debugging messages ++ // (0 = off, 1 = on) ++ rpi,debug = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ lirc_pins: lirc_pins { ++ brcm,pins = <17 18>; ++ brcm,function = <1 0>; // out in ++ brcm,pull = <0 1>; // off down ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; ++ gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; ++ gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; ++ ++ sense = <&lirc_rpi>,"rpi,sense:0"; ++ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; ++ invert = <&lirc_rpi>,"rpi,invert:0"; ++ debug = <&lirc_rpi>,"rpi,debug:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +new file mode 100644 +index 000000000000..412f966a3cc0 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -0,0 +1,54 @@ ++// Definitions for MCP23017 Gpio Extender from Microchip Semiconductor ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ mcp23017_pins: mcp23017_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp23017: mcp@20 { ++ compatible = "microchip,mcp23017"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ #interrupt-cells=<2>; ++ interrupt-parent = <&gpio>; ++ interrupts = <4 2>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&mcp23017_pins>,"brcm,pins:0", ++ <&mcp23017>,"interrupts:0"; ++ addr = <&mcp23017>,"reg:0"; ++ }; ++}; ++ +diff --git a/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts +new file mode 100644 +index 000000000000..7dcbacb3cd00 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts +@@ -0,0 +1,732 @@ ++// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor ++ ++// dtparams: ++// s08-spi--present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI, CS#. ++// s17-spi--present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI, CS#. ++// s08-spi--int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI, CS#, specifies the GPIO pin to which INT output is connected. ++// s17-spi--int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI, CS#, specifies the GPIO pin to which either INTA or INTB output is connected. ++// ++// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#. ++// ++// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25: ++// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25 ++// ++// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7: ++// dtoverlay=spi1-2cs ++// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131 ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ // disable spi-dev on spi0.0 ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi0.1 ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.0 ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.1 ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.2 ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.0 ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.1 ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.2 ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi0.0 ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_00: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi0.1 ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_01: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.0 ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_10: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.1 ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_11: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.2 ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_12: mcp23s08@2 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.0 ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_20: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.1 ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_21: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.2 ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_22: mcp23s08@2 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi0.0 ++ fragment@16 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_00: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi0.1 ++ fragment@17 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_01: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.0 ++ fragment@18 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_10: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.1 ++ fragment@19 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_11: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.2 ++ fragment@20 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_12: mcp23s17@2 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.0 ++ fragment@21 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_20: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.1 ++ fragment@22 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_21: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.2 ++ fragment@23 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_22: mcp23s17@2 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down ++ fragment@24 { ++ target = <&gpio>; ++ __dormant__ { ++ spi0_0_int_pins: spi0_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down ++ fragment@25 { ++ target = <&gpio>; ++ __dormant__ { ++ spi0_1_int_pins: spi0_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down ++ fragment@26 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_0_int_pins: spi1_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down ++ fragment@27 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_1_int_pins: spi1_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down ++ fragment@28 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_2_int_pins: spi1_2_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down ++ fragment@29 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_0_int_pins: spi2_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down ++ fragment@30 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_1_int_pins: spi2_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down ++ fragment@31 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_2_int_pins: spi2_2_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi0.0. ++ // Use default active low interrupt signalling. ++ fragment@32 { ++ target = <&mcp23s08_00>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi0.1. ++ // Use default active low interrupt signalling. ++ fragment@33 { ++ target = <&mcp23s08_01>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.0. ++ // Use default active low interrupt signalling. ++ fragment@34 { ++ target = <&mcp23s08_10>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.1. ++ // Use default active low interrupt signalling. ++ fragment@35 { ++ target = <&mcp23s08_11>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.2. ++ // Use default active low interrupt signalling. ++ fragment@36 { ++ target = <&mcp23s08_12>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.0. ++ // Use default active low interrupt signalling. ++ fragment@37 { ++ target = <&mcp23s08_20>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.1. ++ // Use default active low interrupt signalling. ++ fragment@38 { ++ target = <&mcp23s08_21>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.2. ++ // Use default active low interrupt signalling. ++ fragment@39 { ++ target = <&mcp23s08_22>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi0.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Use default active low interrupt signalling. ++ fragment@40 { ++ target = <&mcp23s17_00>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi0.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@41 { ++ target = <&mcp23s17_01>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@42 { ++ target = <&mcp23s17_10>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@43 { ++ target = <&mcp23s17_11>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.2. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@44 { ++ target = <&mcp23s17_12>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@45 { ++ target = <&mcp23s17_20>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@46 { ++ target = <&mcp23s17_21>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.2. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@47 { ++ target = <&mcp23s17_22>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ __overrides__ { ++ s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0"; ++ s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0"; ++ s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0"; ++ s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0"; ++ s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0"; ++ s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0"; ++ s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0"; ++ s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0"; ++ s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0"; ++ s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0"; ++ s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0"; ++ s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0"; ++ s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0"; ++ s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0"; ++ s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0"; ++ s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0"; ++ s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0"; ++ s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0"; ++ s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0"; ++ s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0"; ++ s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0"; ++ s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0"; ++ s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0"; ++ s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0"; ++ s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0"; ++ s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0"; ++ s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0"; ++ s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0"; ++ s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0"; ++ s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0"; ++ s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0"; ++ s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0"; ++ }; ++}; ++ +diff --git a/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts +new file mode 100755 +index 000000000000..c96cdae27fb1 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts +@@ -0,0 +1,73 @@ ++/* ++ * Device tree overlay for mcp251x/can0 on spi0.0 ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ /* disable spi-dev for spi0.0 */ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ /* the interrupt pin of the can-controller */ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ can0_pins: can0_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* input */ ++ }; ++ }; ++ }; ++ ++ /* the clock/oscillator of the can-controller */ ++ fragment@3 { ++ target-path = "/clocks"; ++ __overlay__ { ++ /* external oscillator of mcp2515 on SPI0.0 */ ++ can0_osc: can0_osc { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ }; ++ }; ++ ++ /* the spi config of the can-controller itself binding everything together */ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ can0: mcp2515@0 { ++ reg = <0>; ++ compatible = "microchip,mcp2515"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&can0_pins>; ++ spi-max-frequency = <10000000>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; ++ clocks = <&can0_osc>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ oscillator = <&can0_osc>,"clock-frequency:0"; ++ spimaxfrequency = <&can0>,"spi-max-frequency:0"; ++ interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts +new file mode 100644 +index 000000000000..67bd0d9bdaa2 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts +@@ -0,0 +1,73 @@ ++/* ++ * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ /* disable spi-dev for spi0.1 */ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ /* the interrupt pin of the can-controller */ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ can1_pins: can1_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* input */ ++ }; ++ }; ++ }; ++ ++ /* the clock/oscillator of the can-controller */ ++ fragment@3 { ++ target-path = "/clocks"; ++ __overlay__ { ++ /* external oscillator of mcp2515 on spi0.1 */ ++ can1_osc: can1_osc { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ }; ++ }; ++ ++ /* the spi config of the can-controller itself binding everything together */ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ can1: mcp2515@1 { ++ reg = <1>; ++ compatible = "microchip,mcp2515"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&can1_pins>; ++ spi-max-frequency = <10000000>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; ++ clocks = <&can1_osc>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ oscillator = <&can1_osc>,"clock-frequency:0"; ++ spimaxfrequency = <&can1>,"spi-max-frequency:0"; ++ interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts +new file mode 100644 +index 000000000000..565af7cf79d7 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts +@@ -0,0 +1,36 @@ ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/* ++ * Fake a higher clock rate to get a larger divisor, and thereby a lower ++ * baudrate. The real clock is 48MHz, which we scale so that requesting ++ * 38.4kHz results in an actual 31.25kHz. ++ * ++ * 48000000*38400/31250 = 58982400 ++ */ ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ midi_clk: midi_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-output-names = "uart0_pclk"; ++ clock-frequency = <58982400>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ clocks = <&midi_clk>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/mmc-overlay.dts b/arch/arm/boot/dts/overlays/mmc-overlay.dts +new file mode 100644 +index 000000000000..d32b02ca01ce +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts +@@ -0,0 +1,38 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ frag0: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc_pins>; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ mmc_pins: mmc_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <7>; /* alt3 */ ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sdhost>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/mz61581-overlay.dts b/arch/arm/boot/dts/overlays/mz61581-overlay.dts +new file mode 100644 +index 000000000000..2c29aaed44c5 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts +@@ -0,0 +1,117 @@ ++/* ++ * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ mz61581_pins: mz61581_pins { ++ brcm,pins = <4 15 18 25>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mz61581: mz61581@0{ ++ compatible = "samsung,s6d02a1"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mz61581_pins>; ++ ++ spi-max-frequency = <128000000>; ++ spi-cpol; ++ spi-cpha; ++ ++ width = <320>; ++ height = <480>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ txbuflen = <32768>; ++ ++ reset-gpios = <&gpio 15 0>; ++ dc-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 0>; ++ ++ init = <0x10000b0 00 ++ 0x1000011 ++ 0x20000ff ++ 0x10000b3 0x02 0x00 0x00 0x00 ++ 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43 ++ 0x10000c1 0x08 0x16 0x08 0x08 ++ 0x10000c4 0x11 0x07 0x03 0x03 ++ 0x10000c6 0x00 ++ 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00 ++ 0x1000035 0x00 ++ 0x1000036 0xa0 ++ 0x100003a 0x55 ++ 0x1000044 0x00 0x01 ++ 0x10000d0 0x07 0x07 0x1d 0x03 ++ 0x10000d1 0x03 0x30 0x10 ++ 0x10000d2 0x03 0x14 0x04 ++ 0x1000029 ++ 0x100002c>; ++ ++ /* This is a workaround to make sure the init sequence slows down and doesn't fail */ ++ debug = <3>; ++ }; ++ ++ mz61581_ts: mz61581_ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <4 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 4 0>; ++ ++ ti,x-plate-ohms = /bits/ 16 <60>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&mz61581>, "spi-max-frequency:0"; ++ rotate = <&mz61581>, "rotate:0"; ++ fps = <&mz61581>, "fps:0"; ++ txbuflen = <&mz61581>, "txbuflen:0"; ++ debug = <&mz61581>, "debug:0"; ++ xohms = <&mz61581_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts +new file mode 100644 +index 000000000000..14a59dcf13ca +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed ++ from the VPU. There is a special driver for this with a separate DT node, ++ which has the unfortunate consequence of breaking the act_led_gpio and ++ act_led_activelow dtparams. ++ ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&act_led>; ++ frag0: __overlay__ { ++ gpios = <&gpio 0 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio = <&frag0>,"gpios:4"; ++ activelow = <&frag0>,"gpios:8"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +new file mode 100644 +index 000000000000..87cf345f9641 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -0,0 +1,46 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. ++ To disable the systemd service that initialises the modem so it doesn't use ++ the UART: ++ ++ sudo systemctl disable hciuart ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +new file mode 100644 +index 000000000000..18f77453c38d +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -0,0 +1,64 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ ++ It is also necessary to edit /lib/systemd/system/hciuart.service and ++ replace ttyAMA0 with ttyS0, unless you have a system with udev rules ++ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 ++ instead because it will always be correct. ++ ++ If cmdline.txt uses the alias serial0 to refer to the user-accessable port ++ then the firmware will replace with the appropriate port whether or not ++ this overlay is used. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins &bt_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&uart1_pins>; ++ __overlay__ { ++ brcm,pins = <32 33>; ++ brcm,function = <2>; /* alt5=UART1 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/piscreen-overlay.dts b/arch/arm/boot/dts/overlays/piscreen-overlay.dts +new file mode 100644 +index 000000000000..40a1f295346e +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts +@@ -0,0 +1,102 @@ ++/* ++ * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ piscreen_pins: piscreen_pins { ++ brcm,pins = <17 25 24 22>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ piscreen: piscreen@0{ ++ compatible = "ilitek,ili9486"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&piscreen_pins>; ++ ++ spi-max-frequency = <24000000>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ regwidth = <16>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 22 1>; ++ debug = <0>; ++ ++ init = <0x10000b0 0x00 ++ 0x1000011 ++ 0x20000ff ++ 0x100003a 0x55 ++ 0x1000036 0x28 ++ 0x10000c2 0x44 ++ 0x10000c5 0x00 0x00 0x00 0x00 ++ 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00 ++ 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 ++ 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 ++ 0x1000011 ++ 0x1000029>; ++ }; ++ ++ piscreen_ts: piscreen-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,swap-xy; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&piscreen>,"spi-max-frequency:0"; ++ rotate = <&piscreen>,"rotate:0"; ++ fps = <&piscreen>,"fps:0"; ++ debug = <&piscreen>,"debug:0"; ++ xohms = <&piscreen_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts +new file mode 100644 +index 000000000000..9c0bed893057 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts +@@ -0,0 +1,106 @@ ++ /* ++ * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ piscreen2_pins: piscreen2_pins { ++ brcm,pins = <17 25 24 22>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ piscreen2: piscreen2@0{ ++ compatible = "ilitek,ili9486"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&piscreen2_pins>; ++ bgr; ++ spi-max-frequency = <64000000>; ++ rotate = <90>; ++ fps = <30>; ++ buswidth = <8>; ++ regwidth = <16>; ++ txbuflen = <32768>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 22 1>; ++ debug = <0>; ++ ++ init = <0x10000b0 0x00 ++ 0x1000011 ++ 0x20000ff ++ 0x100003a 0x55 ++ 0x1000036 0x28 ++ 0x10000c0 0x11 0x09 ++ 0x10000c1 0x41 ++ 0x10000c5 0x00 0x00 0x00 0x00 ++ 0x10000b6 0x00 0x02 ++ 0x10000f7 0xa9 0x51 0x2c 0x2 ++ 0x10000be 0x00 0x04 ++ 0x10000e9 0x00 ++ 0x1000011 ++ 0x1000029>; ++ ++ }; ++ ++ piscreen2_ts: piscreen2-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,swap-xy; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&piscreen2>,"spi-max-frequency:0"; ++ rotate = <&piscreen2>,"rotate:0"; ++ fps = <&piscreen2>,"fps:0"; ++ debug = <&piscreen2>,"debug:0"; ++ xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; ++ +diff --git a/arch/arm/boot/dts/overlays/pisound-overlay.dts b/arch/arm/boot/dts/overlays/pisound-overlay.dts +new file mode 100644 +index 000000000000..7cdfc29ba4fb +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -0,0 +1,114 @@ ++/* ++ * pisound Linux kernel module. ++ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; version 2 of the ++ * License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "blokaslabs,pisound"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ ++ pinctrl-0 = <&pisound_button_pins>; ++ ++ osr-gpios = ++ <&gpio 13 GPIO_ACTIVE_HIGH>, ++ <&gpio 26 GPIO_ACTIVE_HIGH>, ++ <&gpio 16 GPIO_ACTIVE_HIGH>; ++ ++ reset-gpios = ++ <&gpio 12 GPIO_ACTIVE_HIGH>, ++ <&gpio 24 GPIO_ACTIVE_HIGH>; ++ ++ data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; ++ ++ button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pisound_button_pins>; ++ ++ pisound_button_pins: pisound_button_pins { ++ brcm,pins = <17>; ++ brcm,function = <0>; // Input ++ brcm,pull = <2>; // Pull-Up ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pisound_spi: pisound_spi@0{ ++ compatible = "blokaslabs,pisound-spi"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ spi-max-frequency = <1000000>; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pitft22-overlay.dts b/arch/arm/boot/dts/overlays/pitft22-overlay.dts +new file mode 100644 +index 000000000000..894ba2292f6b +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts +@@ -0,0 +1,69 @@ ++/* ++ * Device Tree overlay for pitft by Adafruit ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "disabled"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <25>; ++ brcm,function = <1>; /* out */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts +new file mode 100644 +index 000000000000..5c0752655c70 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts +@@ -0,0 +1,91 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 2.8" capacitive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c1>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ft6236: ft6236@38 { ++ compatible = "focaltech,ft6236"; ++ reg = <0x38>; ++ ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; ++ touchscreen-size-x = <240>; ++ touchscreen-size-y = <320>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ touch-sizex = <&ft6236>,"touchscreen-size-x?"; ++ touch-sizey = <&ft6236>,"touchscreen-size-y?"; ++ touch-invx = <&ft6236>,"touchscreen-inverted-x?"; ++ touch-invy = <&ft6236>,"touchscreen-inverted-y?"; ++ touch-swapxy = <&ft6236>,"touchscreen-swapped-x-y?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +new file mode 100644 +index 000000000000..ed2afc2f7fd6 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +@@ -0,0 +1,121 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ pitft_ts@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "st,stmpe610"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ ++ interrupts = <24 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ ++ stmpe_touchscreen { ++ compatible = "st,stmpe-ts"; ++ st,sample-time = <4>; ++ st,mod-12b = <1>; ++ st,ref-sel = <0>; ++ st,adc-freq = <2>; ++ st,ave-ctrl = <3>; ++ st,touch-det-delay = <4>; ++ st,settling = <2>; ++ st,fraction-z = <7>; ++ st,i-drive = <0>; ++ }; ++ ++ stmpe_gpio: stmpe_gpio { ++ #gpio-cells = <2>; ++ compatible = "st,stmpe-gpio"; ++ /* ++ * only GPIO2 is wired/available ++ * and it is wired to the backlight ++ */ ++ st,norequest-mask = <0x7b>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "/soc"; ++ __overlay__ { ++ backlight { ++ compatible = "gpio-backlight"; ++ gpios = <&stmpe_gpio 2 0>; ++ default-on; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +new file mode 100644 +index 000000000000..25cb5cc9576d +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +@@ -0,0 +1,121 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "himax,hx8357d"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ pitft_ts@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "st,stmpe610"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ ++ interrupts = <24 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ ++ stmpe_touchscreen { ++ compatible = "st,stmpe-ts"; ++ st,sample-time = <4>; ++ st,mod-12b = <1>; ++ st,ref-sel = <0>; ++ st,adc-freq = <2>; ++ st,ave-ctrl = <3>; ++ st,touch-det-delay = <4>; ++ st,settling = <2>; ++ st,fraction-z = <7>; ++ st,i-drive = <0>; ++ }; ++ ++ stmpe_gpio: stmpe_gpio { ++ #gpio-cells = <2>; ++ compatible = "st,stmpe-gpio"; ++ /* ++ * only GPIO2 is wired/available ++ * and it is wired to the backlight ++ */ ++ st,norequest-mask = <0x7b>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "/soc"; ++ __overlay__ { ++ backlight { ++ compatible = "gpio-backlight"; ++ gpios = <&stmpe_gpio 2 0>; ++ default-on; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts +new file mode 100644 +index 000000000000..50143a4bb215 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts +@@ -0,0 +1,35 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ pps: pps { ++ compatible = "pps-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pps_pins>; ++ gpios = <&gpio 18 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pps_pins: pps_pins { ++ brcm,pins = <18>; ++ brcm,function = <0>; // in ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&pps>,"gpios:4", ++ <&pps_pins>,"brcm,pins:0"; ++ assert_falling_edge = <&pps>,"assert-falling-edge?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts +new file mode 100644 +index 000000000000..abdeddd0f2c8 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts +@@ -0,0 +1,47 @@ ++/dts-v1/; ++/plugin/; ++ ++/* ++This is the 2-channel overlay - only use it if you need both channels. ++ ++Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ ++N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++*/ ++ ++/ { ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ pwm_pins: pwm_pins { ++ brcm,pins = <18 19>; ++ brcm,function = <2 2>; /* Alt5 */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&pwm>; ++ frag1: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ assigned-clock-rates = <100000000>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ pin = <&pwm_pins>,"brcm,pins:0"; ++ pin2 = <&pwm_pins>,"brcm,pins:4"; ++ func = <&pwm_pins>,"brcm,function:0"; ++ func2 = <&pwm_pins>,"brcm,function:4"; ++ clock = <&frag1>,"assigned-clock-rates:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/pwm-overlay.dts b/arch/arm/boot/dts/overlays/pwm-overlay.dts +new file mode 100644 +index 000000000000..27809e8dc746 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts +@@ -0,0 +1,43 @@ ++/dts-v1/; ++/plugin/; ++ ++/* ++Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ ++N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++*/ ++ ++/ { ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ pwm_pins: pwm_pins { ++ brcm,pins = <18>; ++ brcm,function = <2>; /* Alt5 */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&pwm>; ++ frag1: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ assigned-clock-rates = <100000000>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ pin = <&pwm_pins>,"brcm,pins:0"; ++ func = <&pwm_pins>,"brcm,function:0"; ++ clock = <&frag1>,"assigned-clock-rates:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/qca7000-overlay.dts b/arch/arm/boot/dts/overlays/qca7000-overlay.dts +new file mode 100644 +index 000000000000..b4e601396c49 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts +@@ -0,0 +1,52 @@ ++// Overlay for the Qualcomm Atheros QCA7000 on I2SE's PLC Stamp micro EVK ++// Visit: https://www.i2se.com/product/plc-stamp-micro-evk for details ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ spidev@0 { ++ status = "disabled"; ++ }; ++ ++ eth1: qca7000@0 { ++ compatible = "qca,qca7000"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <23 0x1>; /* rising edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <23>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +new file mode 100644 +index 000000000000..2fac57ca179f +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +@@ -0,0 +1,45 @@ ++// Definitions for RaspiDACv3 ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ ++ tpa6130a2: tpa6130a2@60 { ++ compatible = "ti,tpa6130a2"; ++ reg = <0x60>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "jg,raspidacv3"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts +new file mode 100644 +index 000000000000..c021d02bb75f +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts +@@ -0,0 +1,21 @@ ++/* ++ * Devicetree overlay for mailbox-driven Raspberry Pi DSI Display ++ * backlight controller ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_backlight: rpi_backlight { ++ compatible = "raspberrypi,rpi-backlight"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts +new file mode 100644 +index 000000000000..a442c8f0ec01 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for RPi DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm1794a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm1794a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rpi,rpi-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-display-overlay.dts b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts +new file mode 100644 +index 000000000000..d7e72eef594e +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * Device Tree overlay for rpi-display by Watterott ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ rpi_display_pins: rpi_display_pins { ++ brcm,pins = <18 23 24 25>; ++ brcm,function = <1 1 1 0>; /* out out out in */ ++ brcm,pull = <0 0 0 2>; /* - - - up */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rpidisplay: rpi-display@0{ ++ compatible = "ilitek,ili9341"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rpi_display_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ reset-gpios = <&gpio 23 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ }; ++ ++ rpidisplay_ts: rpi-display-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <25 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 25 0>; ++ ti,x-plate-ohms = /bits/ 16 <60>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&rpidisplay>,"spi-max-frequency:0"; ++ rotate = <&rpidisplay>,"rotate:0"; ++ fps = <&rpidisplay>,"fps:0"; ++ debug = <&rpidisplay>,"debug:0"; ++ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; ++ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts +new file mode 100644 +index 000000000000..2e53a1749170 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts +@@ -0,0 +1,17 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_ft5406: rpi_ft5406 { ++ compatible = "rpi,rpi-ft5406"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts +new file mode 100644 +index 000000000000..8332d0159a45 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for Rpi-Proto ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8731@1a { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8731"; ++ reg = <0x1a>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rpi,rpi-proto"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts +new file mode 100644 +index 000000000000..27153240e1be +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts +@@ -0,0 +1,47 @@ ++// rpi-sense HAT ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rpi-sense@46 { ++ compatible = "rpi,rpi-sense"; ++ reg = <0x46>; ++ keys-int-gpios = <&gpio 23 1>; ++ status = "okay"; ++ }; ++ ++ lsm9ds1-magn@1c { ++ compatible = "st,lsm9ds1-magn"; ++ reg = <0x1c>; ++ status = "okay"; ++ }; ++ ++ lsm9ds1-accel6a { ++ compatible = "st,lsm9ds1-accel"; ++ reg = <0x6a>; ++ status = "okay"; ++ }; ++ ++ lps25h-press@5c { ++ compatible = "st,lps25h-press"; ++ reg = <0x5c>; ++ status = "okay"; ++ }; ++ ++ hts221-humid@5f { ++ compatible = "st,hts221-humid"; ++ reg = <0x5f>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +new file mode 100644 +index 000000000000..16b1247bfa61 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +@@ -0,0 +1,81 @@ ++// Definitions for RRA DigiDAC1 Audio card ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ aliases { ++ ldo0 = &ldo0; ++ ldo1 = &ldo1; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/soc"; ++ __overlay__ { ++ ++ ldo1: ldo1 { ++ compatible = "regulator-fixed"; ++ regulator-name = "DC_5V"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ ldo0: ldo0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "DC_3V3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ PVDD-supply = <&ldo0>; ++ DVDD-supply = <&ldo0>; ++ }; ++ ++ wm8742: wm8741@1a { ++ compatible = "wlf,wm8741"; ++ reg = <0x1a>; ++ status = "okay"; ++ AVDD-supply = <&ldo1>; ++ DVDD-supply = <&ldo0>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rra,digidac1-soundcard"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts +new file mode 100644 +index 000000000000..339d0d17c01f +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts +@@ -0,0 +1,37 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ sc16is750: sc16is750@48 { ++ compatible = "nxp,sc16is750"; ++ reg = <0x48>; /* address */ ++ clocks = <&sc16is750_clk>; ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ ++ #gpio-cells = <2>; ++ ++ sc16is750_clk: sc16is750_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <14745600>; ++ }; ++ }; ++ }; ++ }; ++ ++ ++ __overrides__ { ++ int_pin = <&sc16is750>,"interrupts:0"; ++ addr = <&sc16is750>,"reg:0"; ++ }; ++ ++}; +diff --git a/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts +new file mode 100644 +index 000000000000..d0a9e82dbea1 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts +@@ -0,0 +1,61 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>; ++ status = "okay"; ++ ++ sc16is752: sc16is752@0 { ++ compatible = "nxp,sc16is752"; ++ reg = <0>; /* CE0 */ ++ clocks = <&sc16is752_clk>; ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ ++ #gpio-controller; ++ #gpio-cells = <2>; ++ spi-max-frequency = <4000000>; ++ ++ sc16is752_clk: sc16is752_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <14745600>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <&sc16is752>,"interrupts:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/sdhost-overlay.dts b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +new file mode 100644 +index 000000000000..a431177a1c9d +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +@@ -0,0 +1,32 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Provide backwards compatible aliases for the old sdhost dtparams. */ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sdhost>; ++ frag0: __overlay__ { ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ brcm,debug-flags = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ force_pio = <&frag0>,"brcm,force-pio?"; ++ pio_limit = <&frag0>,"brcm,pio-limit:0"; ++ debug = <&frag0>,"brcm,debug?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts b/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts +new file mode 100644 +index 000000000000..46d453859b31 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts +@@ -0,0 +1,36 @@ ++/* Enable 1-bit SDIO from MMC interface via GPIOs 22-25. Includes sdhost overlay. */ ++ ++/include/ "sdhost-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@3 { ++ target = <&mmc>; ++ sdio_mmc: __overlay__ { ++ compatible = "brcm,bcm2835-mmc"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <1>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ sdio_pins: sdio_pins { ++ brcm,pins = <22 23 24 25>; ++ brcm,function = <7 7 7 7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ poll_once = <&sdio_mmc>,"non-removable?"; ++ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/sdio-overlay.dts b/arch/arm/boot/dts/overlays/sdio-overlay.dts +new file mode 100644 +index 000000000000..398bd812c716 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -0,0 +1,36 @@ ++/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ ++ ++/include/ "sdhost-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@3 { ++ target = <&mmc>; ++ sdio_mmc: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ sdio_pins: sdio_pins { ++ brcm,pins = <22 23 24 25 26 27>; ++ brcm,function = <7 7 7 7 7 7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ poll_once = <&sdio_mmc>,"non-removable?"; ++ bus_width = <&sdio_mmc>,"bus-width:0"; ++ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts +new file mode 100644 +index 000000000000..e4a4677f6b20 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts +@@ -0,0 +1,23 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Provide backwards compatible aliases for the old sdhost dtparams. */ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sdhost>; ++ frag0: __overlay__ { ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ force_pio = <&frag0>,"brcm,force-pio?"; ++ pio_limit = <&frag0>,"brcm,pio-limit:0"; ++ debug = <&frag0>,"brcm,debug?"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/smi-dev-overlay.dts b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts +new file mode 100644 +index 000000000000..b610d8283608 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts +@@ -0,0 +1,18 @@ ++// Description: Overlay to enable character device interface for SMI. ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ fragment@0 { ++ target = <&soc>; ++ __overlay__ { ++ smi_dev { ++ compatible = "brcm,bcm2835-smi-dev"; ++ smi_handle = <&smi>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts +new file mode 100644 +index 000000000000..13ce0b7cfb24 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts +@@ -0,0 +1,69 @@ ++// Description: Overlay to enable NAND flash through ++// the secondary memory interface ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&smi>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&soc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ nand: flash@0 { ++ compatible = "brcm,bcm2835-smi-nand"; ++ smi_handle = <&smi>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ status = "okay"; ++ ++ partition@0 { ++ label = "stage2"; ++ // 128k ++ reg = <0 0x20000>; ++ read-only; ++ }; ++ partition@1 { ++ label = "firmware"; ++ // 16M ++ reg = <0x20000 0x1000000>; ++ read-only; ++ }; ++ partition@2 { ++ label = "root"; ++ // 2G (will need to use 64 bit for >=4G) ++ reg = <0x1020000 0x80000000>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ smi_pins: smi_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15>; ++ /* Alt 1: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 ++ 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/smi-overlay.dts b/arch/arm/boot/dts/overlays/smi-overlay.dts +new file mode 100644 +index 000000000000..095f52c355fd +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-overlay.dts +@@ -0,0 +1,37 @@ ++// Description: Overlay to enable the secondary memory interface peripheral ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&smi>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ smi_pins: smi_pins { ++ /* Don't configure the top two address bits, as ++ these are already used as ID_SD and ID_SC */ ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ 16 17 18 19 20 21 22 23 24 25>; ++ /* Alt 0: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 ++ 5 5 5 5 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 ++ 0 0 0 0 0 0 0>; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts +new file mode 100644 +index 000000000000..49803b309f86 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts +@@ -0,0 +1,31 @@ ++/* ++ * Device tree overlay to move spi0 to gpio 35 to 39 on CM ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ cs-gpios = <&gpio 36 1>, <&gpio 35 1>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0_cs_pins>; ++ __overlay__ { ++ brcm,pins = <36 35>; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0_pins>; ++ __overlay__ { ++ brcm,pins = <37 38 39>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts +new file mode 100644 +index 000000000000..88d1800d63c9 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts +@@ -0,0 +1,33 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rtc-pcf2123@0 { ++ compatible = "nxp,rtc-pcf2123"; ++ spi-max-frequency = <5000000>; ++ spi-cs-high = <1>; ++ reg = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ pcf2123 = <0>, "=0=1"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts +new file mode 100644 +index 000000000000..ef9845f7184e +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts +@@ -0,0 +1,26 @@ ++/* ++ * Device tree overlay to re-enable hardware CS for SPI0 ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ cs-gpios = <0>, <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0_cs_pins>; ++ __overlay__ { ++ brcm,pins = <8 7>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts +new file mode 100644 +index 000000000000..71c243947004 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts +new file mode 100644 +index 000000000000..2ae0885cf1e7 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts +@@ -0,0 +1,69 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18 17>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>, <&gpio 17 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ cs1_spidev = <&spidev1_1>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts +new file mode 100644 +index 000000000000..8f79044cd8f4 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts +@@ -0,0 +1,81 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18 17 16>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_2: spidev@2 { ++ compatible = "spidev"; ++ reg = <2>; /* CE2 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", ++ <&frag1>,"cs-gpios:28"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ cs1_spidev = <&spidev1_1>,"status"; ++ cs2_spidev = <&spidev1_2>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts +new file mode 100644 +index 000000000000..6f57bc710fe1 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts +new file mode 100644 +index 000000000000..d090631d3682 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts +@@ -0,0 +1,69 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43 44>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>, <&gpio 44 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ cs1_spidev = <&spidev2_1>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts +new file mode 100644 +index 000000000000..e2586728c311 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts +@@ -0,0 +1,81 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43 44 45>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_2: spidev@2 { ++ compatible = "spidev"; ++ reg = <2>; /* CE2 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", ++ <&frag1>,"cs-gpios:28"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ cs1_spidev = <&spidev2_1>,"status"; ++ cs2_spidev = <&spidev2_2>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +new file mode 100644 +index 000000000000..ed2b053aef23 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +@@ -0,0 +1,224 @@ ++/* ++ * tinylcd35-overlay.dts ++ * ++ * ------------------------------------------------- ++ * www.tinlylcd.com ++ * ------------------------------------------------- ++ * Device---Driver-----BUS GPIO's ++ * display tinylcd35 spi0.0 25 24 18 ++ * touch ads7846 spi0.1 5 ++ * rtc ds1307 i2c1-0068 ++ * rtc pcf8563 i2c1-0051 ++ * keypad gpio-keys --------- 17 22 27 23 28 ++ * ++ * ++ * TinyLCD.com 3.5 inch TFT ++ * ++ * Version 001 ++ * 5/3/2015 -- Noralf Trønnes Initial Device tree framework ++ * 10/3/2015 -- tinylcd@gmail.com added ds1307 support. ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ tinylcd35_pins: tinylcd35_pins { ++ brcm,pins = <25 24 18>; ++ brcm,function = <1>; /* out */ ++ }; ++ tinylcd35_ts_pins: tinylcd35_ts_pins { ++ brcm,pins = <5>; ++ brcm,function = <0>; /* in */ ++ }; ++ keypad_pins: keypad_pins { ++ brcm,pins = <4 17 22 23 27>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <1>; /* down */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ tinylcd35: tinylcd35@0{ ++ compatible = "neosec,tinylcd"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&tinylcd35_pins>, ++ <&tinylcd35_ts_pins>; ++ ++ spi-max-frequency = <48000000>; ++ rotate = <270>; ++ fps = <20>; ++ bgr; ++ buswidth = <8>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ ++ init = <0x10000B0 0x80 ++ 0x10000C0 0x0A 0x0A ++ 0x10000C1 0x01 0x01 ++ 0x10000C2 0x33 ++ 0x10000C5 0x00 0x42 0x80 ++ 0x10000B1 0xD0 0x11 ++ 0x10000B4 0x02 ++ 0x10000B6 0x00 0x22 0x3B ++ 0x10000B7 0x07 ++ 0x1000036 0x58 ++ 0x10000F0 0x36 0xA5 0xD3 ++ 0x10000E5 0x80 ++ 0x10000E5 0x01 ++ 0x10000B3 0x00 ++ 0x10000E5 0x00 ++ 0x10000F0 0x36 0xA5 0x53 ++ 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00 ++ 0x100003A 0x55 ++ 0x1000011 ++ 0x2000001 ++ 0x1000029>; ++ }; ++ ++ tinylcd35_ts: tinylcd35_ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ status = "disabled"; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <5 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 5 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ ++ /* RTC */ ++ ++ fragment@5 { ++ target = <&i2c1>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ pcf8563: pcf8563@51 { ++ compatible = "nxp,pcf8563"; ++ reg = <0x51>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&i2c1>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ ds1307: ds1307@68 { ++ compatible = "maxim,ds1307"; ++ reg = <0x68>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ /* ++ * Values for input event code is found under the ++ * 'Keys and buttons' heading in include/uapi/linux/input.h ++ */ ++ fragment@7 { ++ target-path = "/soc"; ++ __overlay__ { ++ keypad: keypad { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&keypad_pins>; ++ status = "disabled"; ++ autorepeat; ++ ++ button@17 { ++ label = "GPIO KEY_UP"; ++ linux,code = <103>; ++ gpios = <&gpio 17 0>; ++ }; ++ button@22 { ++ label = "GPIO KEY_DOWN"; ++ linux,code = <108>; ++ gpios = <&gpio 22 0>; ++ }; ++ button@27 { ++ label = "GPIO KEY_LEFT"; ++ linux,code = <105>; ++ gpios = <&gpio 27 0>; ++ }; ++ button@23 { ++ label = "GPIO KEY_RIGHT"; ++ linux,code = <106>; ++ gpios = <&gpio 23 0>; ++ }; ++ button@4 { ++ label = "GPIO KEY_ENTER"; ++ linux,code = <28>; ++ gpios = <&gpio 4 0>; ++ }; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&tinylcd35>,"spi-max-frequency:0"; ++ rotate = <&tinylcd35>,"rotate:0"; ++ fps = <&tinylcd35>,"fps:0"; ++ debug = <&tinylcd35>,"debug:0"; ++ touch = <&tinylcd35_ts>,"status"; ++ touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0", ++ <&tinylcd35_ts>,"interrupts:0", ++ <&tinylcd35_ts>,"pendown-gpio:4"; ++ xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; ++ rtc-pcf = <0>,"=5"; ++ rtc-ds = <0>,"=6"; ++ keypad = <&keypad>,"status"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/uart1-overlay.dts b/arch/arm/boot/dts/overlays/uart1-overlay.dts +new file mode 100644 +index 000000000000..fa73e1feaeb1 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts +@@ -0,0 +1,38 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ uart1_pins: uart1_pins { ++ brcm,pins = <14 15>; ++ brcm,function = <2>; /* alt5 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++ }; ++ ++ __overrides__ { ++ txd1_pin = <&uart1_pins>,"brcm,pins:0"; ++ rxd1_pin = <&uart1_pins>,"brcm,pins:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +new file mode 100644 +index 000000000000..95a595a35cb4 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * vc4-fkms-v3d-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "cma=256M@256M"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=192M@256M"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=128M@128M"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=96M@128M"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=64M@64M"; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&fb>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&firmwarekms>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&v3d>; ++ __overlay__ { ++ interrupts = <1 10>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&gpu>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@9 { ++ target-path = "/soc/dma"; ++ __overlay__ { ++ brcm,dma-channel-mask = <0x7f35>; ++ }; ++ }; ++ ++ __overrides__ { ++ cma-256 = <0>,"+0-1-2-3-4"; ++ cma-192 = <0>,"-0+1-2-3-4"; ++ cma-128 = <0>,"-0-1+2-3-4"; ++ cma-96 = <0>,"-0-1-2+3-4"; ++ cma-64 = <0>,"-0-1-2-3+4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +new file mode 100644 +index 000000000000..4f1cc20f90dc +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -0,0 +1,136 @@ ++/* ++ * vc4-kms-v3d-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "cma=256M@256M"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=192M@256M"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=128M@128M"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=96M@128M"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=64M@64M"; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&i2c2>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&cprman>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&fb>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&pixelvalve0>; ++ __overlay__ { ++ interrupts = <2 13>; /* pwa0 */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&pixelvalve1>; ++ __overlay__ { ++ interrupts = <2 14>; /* pwa1 */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&pixelvalve2>; ++ __overlay__ { ++ interrupts = <2 10>; /* pixelvalve */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&hvs>; ++ __overlay__ { ++ interrupts = <2 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&hdmi>; ++ __overlay__ { ++ interrupts = <2 8>, <2 9>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&v3d>; ++ __overlay__ { ++ interrupts = <1 10>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&gpu>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@15 { ++ target-path = "/soc/dma"; ++ __overlay__ { ++ brcm,dma-channel-mask = <0x7f35>; ++ }; ++ }; ++ ++ __overrides__ { ++ cma-256 = <0>,"+0-1-2-3-4"; ++ cma-192 = <0>,"-0+1-2-3-4"; ++ cma-128 = <0>,"-0-1+2-3-4"; ++ cma-96 = <0>,"-0-1-2+3-4"; ++ cma-64 = <0>,"-0-1-2-3+4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/vga666-overlay.dts b/arch/arm/boot/dts/overlays/vga666-overlay.dts +new file mode 100644 +index 000000000000..7fcab963eb4a +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts +@@ -0,0 +1,30 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no VGA driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vga666_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ vga666_pins: vga666_pins { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 ++ 13 14 15 16 17 18 19 20 21>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts +new file mode 100644 +index 000000000000..29a3b48d19ab +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for w1-gpio module (without external pullup) ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ w1: onewire@0 { ++ compatible = "w1-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&w1_pins>; ++ gpios = <&gpio 4 0>; ++ rpi,parasitic-power = <0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ w1_pins: w1_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; // in (initially) ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&w1>,"gpios:4", ++ <&w1_pins>,"brcm,pins:0"; ++ pullup = <&w1>,"rpi,parasitic-power:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts +new file mode 100644 +index 000000000000..66a98f6c9601 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts +@@ -0,0 +1,41 @@ ++// Definitions for w1-gpio module (with external pullup) ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ w1: onewire@0 { ++ compatible = "w1-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&w1_pins>; ++ gpios = <&gpio 4 0>, <&gpio 5 1>; ++ rpi,parasitic-power = <0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ w1_pins: w1_pins { ++ brcm,pins = <4 5>; ++ brcm,function = <0 1>; // in out ++ brcm,pull = <0 0>; // off off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&w1>,"gpios:4", ++ <&w1_pins>,"brcm,pins:0"; ++ extpullup = <&w1>,"gpios:16", ++ <&w1_pins>,"brcm,pins:4"; ++ pullup = <&w1>,"rpi,parasitic-power:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/overlays/wittypi-overlay.dts b/arch/arm/boot/dts/overlays/wittypi-overlay.dts +new file mode 100644 +index 000000000000..8498134fdbb3 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts +@@ -0,0 +1,44 @@ ++/* ++ * Device Tree overlay for Witty Pi extension board by UUGear ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ compatible = "gpio-leds"; ++ wittypi_led: wittypi_led { ++ label = "wittypi_led"; ++ linux,default-trigger = "default-on"; ++ gpios = <&gpio 17 0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rtc: ds1337@68 { ++ compatible = "dallas,ds1337"; ++ reg = <0x68>; ++ wakeup-source; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ led_gpio = <&wittypi_led>,"gpios:4"; ++ led_trigger = <&wittypi_led>,"linux,default-trigger"; ++ }; ++ ++}; +diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst +index 15c503f6792b..344ca1c2412c 100644 +--- a/scripts/Makefile.dtbinst ++++ b/scripts/Makefile.dtbinst +@@ -27,6 +27,7 @@ ifeq ("$(dtbinst_root)", "$(obj)") + endif + + dtbinst-files := $(dtb-y) ++dtboinst-files := $(dtbo-y) + dtbinst-dirs := $(dts-dirs) + + # Helper targets for Installing DTBs into the boot directory +@@ -35,15 +36,18 @@ quiet_cmd_dtb_install = INSTALL $< + + install-dir = $(patsubst $(dtbinst_root)%,$(INSTALL_DTBS_PATH)%,$(obj)) + +-$(dtbinst-files) $(dtbinst-dirs): | __dtbs_install_prep ++$(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs): | __dtbs_install_prep + + $(dtbinst-files): %.dtb: $(obj)/%.dtb + $(call cmd,dtb_install,$(install-dir)) + ++$(dtboinst-files): %.dtbo: $(obj)/%.dtbo ++ $(call cmd,dtb_install,$(install-dir)) ++ + $(dtbinst-dirs): + $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ + +-PHONY += $(dtbinst-files) $(dtbinst-dirs) +-__dtbs_install: $(dtbinst-files) $(dtbinst-dirs) ++PHONY += $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) ++__dtbs_install: $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) + + .PHONY: $(PHONY) +diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib +index 0a07f9014944..1967878a8434 100644 +--- a/scripts/Makefile.lib ++++ b/scripts/Makefile.lib +@@ -312,6 +312,17 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ + $(obj)/%.dtb: $(src)/%.dts FORCE + $(call if_changed_dep,dtc) + ++quiet_cmd_dtco = DTCO $@ ++cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \ ++ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ ++ $(DTC) -@ -H epapr -O dtb -o $@ -b 0 \ ++ -i $(dir $<) $(DTC_FLAGS) \ ++ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ ++ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) ++ ++$(obj)/%.dtbo: $(src)/%-overlay.dts FORCE ++ $(call if_changed_dep,dtco) ++ + dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) + + # Bzip2 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1054_b183f2683f2fc232825144b9ed438be607c94b37.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1054_b183f2683f2fc232825144b9ed438be607c94b37.patch --- linux-4.9.13/debian/patches/rpi/rpi_1054_b183f2683f2fc232825144b9ed438be607c94b37.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1054_b183f2683f2fc232825144b9ed438be607c94b37.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,170 @@ +commit b183f2683f2fc232825144b9ed438be607c94b37 +Author: Phil Elwell +Date: Fri Feb 6 13:50:57 2015 +0000 + + BCM270x_DT: Add pwr_led, and the required "input" trigger + + The "input" trigger makes the associated GPIO an input. This is to support + the Raspberry Pi PWR LED, which is driven by external hardware in normal use. + + N.B. pwr_led is not available on Model A or B boards. + + leds-gpio: Implement the brightness_get method + + The power LED uses some clever logic that means it is driven + by a voltage measuring circuit when configured as input, otherwise + it is driven by the GPIO output value. This patch wires up the + brightness_get method for leds-gpio so that user-space can monitor + the LED value via /sys/class/gpio/led1/brightness. Using the input + trigger this returns an indication of the system power health, + otherwise it is just whatever value the trigger has written most + recently. + + See: https://github.com/raspberrypi/linux/issues/1064 + +diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c +index d400dcaf4d29..6a27a6930348 100644 +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -50,8 +50,15 @@ static void gpio_led_set(struct led_classdev *led_cdev, + led_dat->platform_gpio_blink_set(led_dat->gpiod, level, + NULL, NULL); + led_dat->blinking = 0; ++ } else if (led_dat->cdev.flags & SET_GPIO_INPUT) { ++ gpiod_direction_input(led_dat->gpiod); ++ led_dat->cdev.flags &= ~SET_GPIO_INPUT; ++ } else if (led_dat->cdev.flags & SET_GPIO_OUTPUT) { ++ gpiod_direction_output(led_dat->gpiod, level); ++ led_dat->cdev.flags &= ~SET_GPIO_OUTPUT; + } else { +- if (led_dat->can_sleep) ++ if (led_dat->can_sleep || ++ (led_dat->cdev.flags & (SET_GPIO_INPUT | SET_GPIO_OUTPUT) )) + gpiod_set_value_cansleep(led_dat->gpiod, level); + else + gpiod_set_value(led_dat->gpiod, level); +@@ -65,6 +72,13 @@ static int gpio_led_set_blocking(struct led_classdev *led_cdev, + return 0; + } + ++static enum led_brightness gpio_led_get(struct led_classdev *led_cdev) ++{ ++ struct gpio_led_data *led_dat = ++ container_of(led_cdev, struct gpio_led_data, cdev); ++ return gpiod_get_value_cansleep(led_dat->gpiod) ? LED_FULL : LED_OFF; ++} ++ + static int gpio_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) + { +@@ -122,6 +136,8 @@ static int create_gpio_led(const struct gpio_led *template, + led_dat->platform_gpio_blink_set = blink_set; + led_dat->cdev.blink_set = gpio_blink_set; + } ++ led_dat->cdev.brightness_set = gpio_led_set; ++ led_dat->cdev.brightness_get = gpio_led_get; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { + state = gpiod_get_value_cansleep(led_dat->gpiod); + if (state < 0) +diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig +index 3f9ddb9fafa7..c1b6c83f3b63 100644 +--- a/drivers/leds/trigger/Kconfig ++++ b/drivers/leds/trigger/Kconfig +@@ -116,6 +116,13 @@ config LEDS_TRIGGER_CAMERA + This enables direct flash/torch on/off by the driver, kernel space. + If unsure, say Y. + ++config LEDS_TRIGGER_INPUT ++ tristate "LED Input Trigger" ++ depends on LEDS_TRIGGERS ++ help ++ This allows the GPIOs assigned to be LEDs to be initialised to inputs. ++ If unsure, say Y. ++ + config LEDS_TRIGGER_PANIC + bool "LED Panic Trigger" + depends on LEDS_TRIGGERS +diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile +index a72c43cffebf..51b90c468908 100644 +--- a/drivers/leds/trigger/Makefile ++++ b/drivers/leds/trigger/Makefile +@@ -9,4 +9,5 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o + obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o + obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o + obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o ++obj-$(CONFIG_LEDS_TRIGGER_INPUT) += ledtrig-input.o + obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o +diff --git a/drivers/leds/trigger/ledtrig-input.c b/drivers/leds/trigger/ledtrig-input.c +new file mode 100644 +index 000000000000..27f8ebea43d8 +--- /dev/null ++++ b/drivers/leds/trigger/ledtrig-input.c +@@ -0,0 +1,54 @@ ++/* ++ * Set LED GPIO to Input "Trigger" ++ * ++ * Copyright 2015 Phil Elwell ++ * ++ * Based on Nick Forbes's ledtrig-default-on.c. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include "../leds.h" ++ ++static void input_trig_activate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_INPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static void input_trig_deactivate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_OUTPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static struct led_trigger input_led_trigger = { ++ .name = "input", ++ .activate = input_trig_activate, ++ .deactivate = input_trig_deactivate, ++}; ++ ++static int __init input_trig_init(void) ++{ ++ return led_trigger_register(&input_led_trigger); ++} ++ ++static void __exit input_trig_exit(void) ++{ ++ led_trigger_unregister(&input_led_trigger); ++} ++ ++module_init(input_trig_init); ++module_exit(input_trig_exit); ++ ++MODULE_AUTHOR("Phil Elwell "); ++MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\""); ++MODULE_LICENSE("GPL"); +diff --git a/include/linux/leds.h b/include/linux/leds.h +index ddfcb2df3656..271563eb835f 100644 +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -52,6 +52,9 @@ struct led_classdev { + #define LED_DEV_CAP_FLASH (1 << 24) + #define LED_HW_PLUGGABLE (1 << 25) + #define LED_PANIC_INDICATOR (1 << 26) ++ /* Additions for Raspberry Pi PWR LED */ ++#define SET_GPIO_INPUT (1 << 30) ++#define SET_GPIO_OUTPUT (1 << 31) + + /* Set LED brightness level + * Must not sleep. Use brightness_set_blocking for drivers diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1055_5bf5eb1e436984d1996dbda89810c7e05ebc97a8.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1055_5bf5eb1e436984d1996dbda89810c7e05ebc97a8.patch --- linux-4.9.13/debian/patches/rpi/rpi_1055_5bf5eb1e436984d1996dbda89810c7e05ebc97a8.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1055_5bf5eb1e436984d1996dbda89810c7e05ebc97a8.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,250 @@ +commit 5bf5eb1e436984d1996dbda89810c7e05ebc97a8 +Author: Siarhei Siamashka +Date: Mon Jun 17 13:32:11 2013 +0300 + + fbdev: add FBIOCOPYAREA ioctl + + Based on the patch authored by Ali Gholami Rudi at + https://lkml.org/lkml/2009/7/13/153 + + Provide an ioctl for userspace applications, but only if this operation + is hardware accelerated (otherwide it does not make any sense). + + Signed-off-by: Siarhei Siamashka + + bcm2708_fb: Add ioctl for reading gpu memory through dma + +diff --git a/drivers/video/fbdev/bcm2708_fb.c b/drivers/video/fbdev/bcm2708_fb.c +index 37f60813fe1d..53c5a0bdadb4 100644 +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -31,8 +31,10 @@ + #include + #include + #include ++#include + #include + #include ++#include + #include + + //#define BCM2708_FB_DEBUG +@@ -426,6 +428,110 @@ static int bcm2708_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info + return result; + } + ++static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src, int size) ++{ ++ int burst_size = (fb->dma_chan == 0) ? 8 : 2; ++ struct bcm2708_dma_cb *cb = fb->cb_base; ++ ++ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC; ++ cb->dst = dst; ++ cb->src = src; ++ cb->length = size; ++ cb->stride = 0; ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++ cb->next = 0; ++ ++ if (size < dma_busy_wait_threshold) { ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ bcm_dma_wait_idle(fb->dma_chan_base); ++ } else { ++ void __iomem *dma_chan = fb->dma_chan_base; ++ cb->info |= BCM2708_DMA_INT_EN; ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ while (bcm_dma_is_busy(dma_chan)) { ++ wait_event_interruptible( ++ fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); ++ } ++ fb->stats.dma_irqs++; ++ } ++ fb->stats.dma_copies++; ++} ++ ++#define INTALIAS_NORMAL(x) ((x)&~0xc0000000) // address with no aliases ++#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) // cache coherent but non-allocating in L1 and L2 ++ ++static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg) ++{ ++ struct fb_dmacopy ioparam; ++ size_t size = PAGE_SIZE; ++ u32 *buf = NULL; ++ dma_addr_t bus_addr; ++ long rc = 0; ++ size_t offset; ++ struct { u32 base, length; } gpu = {}; ++ ++ /* restrict this to root user */ ++ if (!uid_eq(current_euid(), GLOBAL_ROOT_UID)) ++ { ++ rc = -EFAULT; ++ goto out; ++ } ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user\n", ++ __func__); ++ rc = -EFAULT; ++ goto out; ++ } ++ ++ rc = rpi_firmware_property(fb->fw, ++ RPI_FIRMWARE_GET_VC_MEMORY, ++ &gpu, sizeof(gpu)); ++ if (rc != 0 || gpu.base == 0 || gpu.length == 0) { ++ pr_err("[%s]: Unable to determine gpu memory %ld,%x,%x)\n", __func__, rc, gpu.base, gpu.length); ++ return -EFAULT; ++ } ++ ++ if (INTALIAS_NORMAL(ioparam.src) < gpu.base || INTALIAS_NORMAL(ioparam.src) >= gpu.base + gpu.length) { ++ pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, INTALIAS_NORMAL(ioparam.src), gpu.base, gpu.base + gpu.length); ++ return -EFAULT; ++ } ++ ++ buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr, ++ GFP_ATOMIC); ++ if (!buf) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%d)\n", ++ __func__, size); ++ rc = -ENOMEM; ++ goto out; ++ } ++ ++ for (offset = 0; offset < ioparam.length; offset += size) { ++ size_t remaining = ioparam.length - offset; ++ size_t s = min(size, remaining); ++ unsigned char *p = (unsigned char *)ioparam.src + offset; ++ unsigned char *q = (unsigned char *)ioparam.dst + offset; ++ dma_memcpy(fb, bus_addr, INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); ++ if (copy_to_user(q, buf, s) != 0) { ++ pr_err("[%s]: failed to copy-to-user\n", ++ __func__); ++ rc = -EFAULT; ++ goto out; ++ } ++ } ++out: ++ if (buf) ++ dma_free_coherent(fb->fb.device, PAGE_ALIGN(size), buf, bus_addr); ++ return rc; ++} ++ + static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) + { + struct bcm2708_fb *fb = to_bcm2708(info); +@@ -438,6 +544,9 @@ static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long a + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, + &dummy, sizeof(dummy)); + break; ++ case FBIODMACOPY: ++ ret = vc_mem_copy(fb, arg); ++ break; + default: + dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); + return -ENOTTY; +diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c +index 76c1ad96fb37..7bf48e478c05 100644 +--- a/drivers/video/fbdev/core/fbmem.c ++++ b/drivers/video/fbdev/core/fbmem.c +@@ -1084,6 +1084,31 @@ fb_blank(struct fb_info *info, int blank) + } + EXPORT_SYMBOL(fb_blank); + ++static int fb_copyarea_user(struct fb_info *info, ++ struct fb_copyarea *copy) ++{ ++ int ret = 0; ++ if (!lock_fb_info(info)) ++ return -ENODEV; ++ if (copy->dx >= info->var.xres || ++ copy->sx >= info->var.xres || ++ copy->width > info->var.xres || ++ copy->dy >= info->var.yres || ++ copy->sy >= info->var.yres || ++ copy->height > info->var.yres || ++ copy->dx + copy->width > info->var.xres || ++ copy->sx + copy->width > info->var.xres || ++ copy->dy + copy->height > info->var.yres || ++ copy->sy + copy->height > info->var.yres) { ++ ret = -EINVAL; ++ goto out; ++ } ++ info->fbops->fb_copyarea(info, copy); ++out: ++ unlock_fb_info(info); ++ return ret; ++} ++ + static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) + { +@@ -1094,6 +1119,7 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + struct fb_cmap cmap_from; + struct fb_cmap_user cmap; + struct fb_event event; ++ struct fb_copyarea copy; + void __user *argp = (void __user *)arg; + long ret = 0; + +@@ -1211,6 +1237,15 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + unlock_fb_info(info); + console_unlock(); + break; ++ case FBIOCOPYAREA: ++ if (info->flags & FBINFO_HWACCEL_COPYAREA) { ++ /* only provide this ioctl if it is accelerated */ ++ if (copy_from_user(©, argp, sizeof(copy))) ++ return -EFAULT; ++ ret = fb_copyarea_user(info, ©); ++ break; ++ } ++ /* fall through */ + default: + if (!lock_fb_info(info)) + return -ENODEV; +@@ -1365,6 +1400,7 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd, + case FBIOPAN_DISPLAY: + case FBIOGET_CON2FBMAP: + case FBIOPUT_CON2FBMAP: ++ case FBIOCOPYAREA: + arg = (unsigned long) compat_ptr(arg); + case FBIOBLANK: + ret = do_fb_ioctl(info, cmd, arg); +diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h +index fb795c3b3c17..703fa8a70574 100644 +--- a/include/uapi/linux/fb.h ++++ b/include/uapi/linux/fb.h +@@ -34,6 +34,12 @@ + #define FBIOPUT_MODEINFO 0x4617 + #define FBIOGET_DISPINFO 0x4618 + #define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) ++/* ++ * HACK: use 'z' in order not to clash with any other ioctl numbers which might ++ * be concurrently added to the mainline kernel ++ */ ++#define FBIOCOPYAREA _IOW('z', 0x21, struct fb_copyarea) ++#define FBIODMACOPY _IOW('z', 0x22, struct fb_dmacopy) + + #define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ + #define FB_TYPE_PLANES 1 /* Non interleaved planes */ +@@ -346,6 +352,12 @@ struct fb_copyarea { + __u32 sy; + }; + ++struct fb_dmacopy { ++ void *dst; ++ __u32 src; ++ __u32 length; ++}; ++ + struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1056_d8b49e65dda4e4babc6719e2a136a5dd19e74786.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1056_d8b49e65dda4e4babc6719e2a136a5dd19e74786.patch --- linux-4.9.13/debian/patches/rpi/rpi_1056_d8b49e65dda4e4babc6719e2a136a5dd19e74786.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1056_d8b49e65dda4e4babc6719e2a136a5dd19e74786.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,209 @@ +commit d8b49e65dda4e4babc6719e2a136a5dd19e74786 +Author: Harm Hanemaaijer +Date: Thu Jun 20 20:21:39 2013 +0200 + + Speed up console framebuffer imageblit function + + Especially on platforms with a slower CPU but a relatively high + framebuffer fill bandwidth, like current ARM devices, the existing + console monochrome imageblit function used to draw console text is + suboptimal for common pixel depths such as 16bpp and 32bpp. The existing + code is quite general and can deal with several pixel depths. By creating + special case functions for 16bpp and 32bpp, by far the most common pixel + formats used on modern systems, a significant speed-up is attained + which can be readily felt on ARM-based devices like the Raspberry Pi + and the Allwinner platform, but should help any platform using the + fb layer. + + The special case functions allow constant folding, eliminating a number + of instructions including divide operations, and allow the use of an + unrolled loop, eliminating instructions with a variable shift size, + reducing source memory access instructions, and eliminating excessive + branching. These unrolled loops also allow much better code optimization + by the C compiler. The code that selects which optimized variant is used + is also simplified, eliminating integer divide instructions. + + The speed-up, measured by timing 'cat file.txt' in the console, varies + between 40% and 70%, when testing on the Raspberry Pi and Allwinner + ARM-based platforms, depending on font size and the pixel depth, with + the greater benefit for 32bpp. + + Signed-off-by: Harm Hanemaaijer + +diff --git a/drivers/video/fbdev/core/cfbimgblt.c b/drivers/video/fbdev/core/cfbimgblt.c +index a2bb276a8b24..436494fba15a 100644 +--- a/drivers/video/fbdev/core/cfbimgblt.c ++++ b/drivers/video/fbdev/core/cfbimgblt.c +@@ -28,6 +28,11 @@ + * + * Also need to add code to deal with cards endians that are different than + * the native cpu endians. I also need to deal with MSB position in the word. ++ * Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013: ++ * - Provide optimized versions of fast_imageblit for 16 and 32bpp that are ++ * significantly faster than the previous implementation. ++ * - Simplify the fast/slow_imageblit selection code, avoiding integer ++ * divides. + */ + #include + #include +@@ -262,6 +267,133 @@ static inline void fast_imageblit(const struct fb_image *image, struct fb_info * + } + } + ++/* ++ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded ++ * into the code, main loop unrolled. ++ */ ++ ++static inline void fast_imageblit16(const struct fb_image *image, ++ struct fb_info *p, u8 __iomem * dst1, ++ u32 fgcolor, u32 bgcolor) ++{ ++ u32 fgx = fgcolor, bgx = bgcolor; ++ u32 spitch = (image->width + 7) / 8; ++ u32 end_mask, eorx; ++ const char *s = image->data, *src; ++ u32 __iomem *dst; ++ const u32 *tab = NULL; ++ int i, j, k; ++ ++ tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le; ++ ++ fgx <<= 16; ++ bgx <<= 16; ++ fgx |= fgcolor; ++ bgx |= bgcolor; ++ ++ eorx = fgx ^ bgx; ++ k = image->width / 2; ++ ++ for (i = image->height; i--;) { ++ dst = (u32 __iomem *) dst1; ++ src = s; ++ ++ j = k; ++ while (j >= 4) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 6) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 4) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 2) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[bits & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ src++; ++ j -= 4; ++ } ++ if (j != 0) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 6) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ if (j >= 2) { ++ end_mask = tab[(bits >> 4) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ if (j == 3) { ++ end_mask = tab[(bits >> 2) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst); ++ } ++ } ++ } ++ dst1 += p->fix.line_length; ++ s += spitch; ++ } ++} ++ ++/* ++ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded ++ * into the code, main loop unrolled. ++ */ ++ ++static inline void fast_imageblit32(const struct fb_image *image, ++ struct fb_info *p, u8 __iomem * dst1, ++ u32 fgcolor, u32 bgcolor) ++{ ++ u32 fgx = fgcolor, bgx = bgcolor; ++ u32 spitch = (image->width + 7) / 8; ++ u32 end_mask, eorx; ++ const char *s = image->data, *src; ++ u32 __iomem *dst; ++ const u32 *tab = NULL; ++ int i, j, k; ++ ++ tab = cfb_tab32; ++ ++ eorx = fgx ^ bgx; ++ k = image->width; ++ ++ for (i = image->height; i--;) { ++ dst = (u32 __iomem *) dst1; ++ src = s; ++ ++ j = k; ++ while (j >= 8) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 6) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 5) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 4) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 3) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 2) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 1) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[bits & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ src++; ++ j -= 8; ++ } ++ if (j != 0) { ++ u32 bits = (u32) * src; ++ while (j > 1) { ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ bits <<= 1; ++ j--; ++ } ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst); ++ } ++ dst1 += p->fix.line_length; ++ s += spitch; ++ } ++} ++ + void cfb_imageblit(struct fb_info *p, const struct fb_image *image) + { + u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0; +@@ -294,11 +426,21 @@ void cfb_imageblit(struct fb_info *p, const struct fb_image *image) + bgcolor = image->bg_color; + } + +- if (32 % bpp == 0 && !start_index && !pitch_index && +- ((width & (32/bpp-1)) == 0) && +- bpp >= 8 && bpp <= 32) +- fast_imageblit(image, p, dst1, fgcolor, bgcolor); +- else ++ if (!start_index && !pitch_index) { ++ if (bpp == 32) ++ fast_imageblit32(image, p, dst1, fgcolor, ++ bgcolor); ++ else if (bpp == 16 && (width & 1) == 0) ++ fast_imageblit16(image, p, dst1, fgcolor, ++ bgcolor); ++ else if (bpp == 8 && (width & 3) == 0) ++ fast_imageblit(image, p, dst1, fgcolor, ++ bgcolor); ++ else ++ slow_imageblit(image, p, dst1, fgcolor, ++ bgcolor, ++ start_index, pitch_index); ++ } else + slow_imageblit(image, p, dst1, fgcolor, bgcolor, + start_index, pitch_index); + } else diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1057_305b1bc785a62a4343bb0d67d716fbd5cf841299.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1057_305b1bc785a62a4343bb0d67d716fbd5cf841299.patch --- linux-4.9.13/debian/patches/rpi/rpi_1057_305b1bc785a62a4343bb0d67d716fbd5cf841299.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1057_305b1bc785a62a4343bb0d67d716fbd5cf841299.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,245 @@ +commit 305b1bc785a62a4343bb0d67d716fbd5cf841299 +Author: popcornmix +Date: Wed May 8 11:46:50 2013 +0100 + + enabling the realtime clock 1-wire chip DS1307 and 1-wire on GPIO4 (as a module) + + 1-wire: Add support for configuring pin for w1-gpio kernel module + See: https://github.com/raspberrypi/linux/pull/457 + + Add bitbanging pullups, use them for w1-gpio + + Allows parasite power to work, uses module option pullup=1 + + bcm2708: Ensure 1-wire pullup is disabled by default, and expose as module parameter + + Signed-off-by: Alex J Lennon + + w1-gpio: Add gpiopin module parameter and correctly free up gpio pull-up pin, if set + + Signed-off-by: Alex J Lennon + + w1-gpio: Sort out the pullup/parasitic power tangle + +diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c +index a373ae69d9f6..080e5976e2a6 100644 +--- a/drivers/w1/masters/w1-gpio.c ++++ b/drivers/w1/masters/w1-gpio.c +@@ -23,6 +23,19 @@ + #include "../w1.h" + #include "../w1_int.h" + ++static int w1_gpio_pullup = 0; ++static int w1_gpio_pullup_orig = 0; ++module_param_named(pullup, w1_gpio_pullup, int, 0); ++MODULE_PARM_DESC(pullup, "Enable parasitic power (power on data) mode"); ++static int w1_gpio_pullup_pin = -1; ++static int w1_gpio_pullup_pin_orig = -1; ++module_param_named(extpullup, w1_gpio_pullup_pin, int, 0); ++MODULE_PARM_DESC(extpullup, "GPIO external pullup pin number"); ++static int w1_gpio_pin = -1; ++static int w1_gpio_pin_orig = -1; ++module_param_named(gpiopin, w1_gpio_pin, int, 0); ++MODULE_PARM_DESC(gpiopin, "GPIO pin number"); ++ + static u8 w1_gpio_set_pullup(void *data, int delay) + { + struct w1_gpio_platform_data *pdata = data; +@@ -67,6 +80,16 @@ static u8 w1_gpio_read_bit(void *data) + return gpio_get_value(pdata->pin) ? 1 : 0; + } + ++static void w1_gpio_bitbang_pullup(void *data, u8 on) ++{ ++ struct w1_gpio_platform_data *pdata = data; ++ ++ if (on) ++ gpio_direction_output(pdata->pin, 1); ++ else ++ gpio_direction_input(pdata->pin); ++} ++ + #if defined(CONFIG_OF) + static const struct of_device_id w1_gpio_dt_ids[] = { + { .compatible = "w1-gpio" }, +@@ -80,6 +103,7 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) + struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + int gpio; ++ u32 value; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) +@@ -88,6 +112,9 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) + if (of_get_property(np, "linux,open-drain", NULL)) + pdata->is_open_drain = 1; + ++ if (of_property_read_u32(np, "rpi,parasitic-power", &value) == 0) ++ pdata->parasitic_power = (value != 0); ++ + gpio = of_get_gpio(np, 0); + if (gpio < 0) { + if (gpio != -EPROBE_DEFER) +@@ -103,7 +130,7 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) + if (gpio == -EPROBE_DEFER) + return gpio; + /* ignore other errors as the pullup gpio is optional */ +- pdata->ext_pullup_enable_pin = gpio; ++ pdata->ext_pullup_enable_pin = (gpio >= 0) ? gpio : -1; + + pdev->dev.platform_data = pdata; + +@@ -113,13 +140,15 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) + static int w1_gpio_probe(struct platform_device *pdev) + { + struct w1_bus_master *master; +- struct w1_gpio_platform_data *pdata; ++ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; + int err; + +- if (of_have_populated_dt()) { +- err = w1_gpio_probe_dt(pdev); +- if (err < 0) +- return err; ++ if(pdata == NULL) { ++ if (of_have_populated_dt()) { ++ err = w1_gpio_probe_dt(pdev); ++ if (err < 0) ++ return err; ++ } + } + + pdata = dev_get_platdata(&pdev->dev); +@@ -136,6 +165,22 @@ static int w1_gpio_probe(struct platform_device *pdev) + return -ENOMEM; + } + ++ w1_gpio_pin_orig = pdata->pin; ++ w1_gpio_pullup_pin_orig = pdata->ext_pullup_enable_pin; ++ w1_gpio_pullup_orig = pdata->parasitic_power; ++ ++ if(gpio_is_valid(w1_gpio_pin)) { ++ pdata->pin = w1_gpio_pin; ++ pdata->ext_pullup_enable_pin = -1; ++ pdata->parasitic_power = -1; ++ } ++ pdata->parasitic_power |= w1_gpio_pullup; ++ if(gpio_is_valid(w1_gpio_pullup_pin)) { ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin; ++ } ++ ++ dev_info(&pdev->dev, "gpio pin %d, external pullup pin %d, parasitic power %d\n", pdata->pin, pdata->ext_pullup_enable_pin, pdata->parasitic_power); ++ + err = devm_gpio_request(&pdev->dev, pdata->pin, "w1"); + if (err) { + dev_err(&pdev->dev, "gpio_request (pin) failed\n"); +@@ -165,6 +210,14 @@ static int w1_gpio_probe(struct platform_device *pdev) + master->set_pullup = w1_gpio_set_pullup; + } + ++ if (pdata->parasitic_power) { ++ if (pdata->is_open_drain) ++ printk(KERN_ERR "w1-gpio 'pullup'(parasitic power) " ++ "option doesn't work with open drain GPIO\n"); ++ else ++ master->bitbang_pullup = w1_gpio_bitbang_pullup; ++ } ++ + err = w1_add_master_device(master); + if (err) { + dev_err(&pdev->dev, "w1_add_master device failed\n"); +@@ -195,6 +248,10 @@ static int w1_gpio_remove(struct platform_device *pdev) + + w1_remove_master_device(master); + ++ pdata->pin = w1_gpio_pin_orig; ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin_orig; ++ pdata->parasitic_power = w1_gpio_pullup_orig; ++ + return 0; + } + +diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h +index 129895f562b0..737a75b594c6 100644 +--- a/drivers/w1/w1.h ++++ b/drivers/w1/w1.h +@@ -173,6 +173,12 @@ struct w1_bus_master + + u8 (*set_pullup)(void *, int); + ++ /** ++ * Turns the pullup on/off in bitbanging mode, takes an on/off argument. ++ * @return -1=Error, 0=completed ++ */ ++ void (*bitbang_pullup) (void *, u8); ++ + void (*search)(void *, struct w1_master *, + u8, w1_slave_found_callback); + }; +diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c +index 20f766afa4c7..c4fbdb1f25e9 100644 +--- a/drivers/w1/w1_int.c ++++ b/drivers/w1/w1_int.c +@@ -122,6 +122,20 @@ int w1_add_master_device(struct w1_bus_master *master) + return(-EINVAL); + } + ++ /* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup ++ * and takes care of timing itself */ ++ if (!master->write_byte && !master->touch_bit && master->set_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup requires " ++ "write_byte or touch_bit, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ ++ if (master->set_pullup && master->bitbang_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup should not " ++ "be set when bitbang_pullup is used, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ + /* Lock until the device is added (or not) to w1_masters. */ + mutex_lock(&w1_mlock); + /* Search for the first available id (starting at 1). */ +diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c +index f4bc8c100a01..77527e37c7e7 100644 +--- a/drivers/w1/w1_io.c ++++ b/drivers/w1/w1_io.c +@@ -134,10 +134,22 @@ static void w1_pre_write(struct w1_master *dev) + static void w1_post_write(struct w1_master *dev) + { + if (dev->pullup_duration) { +- if (dev->enable_pullup && dev->bus_master->set_pullup) +- dev->bus_master->set_pullup(dev->bus_master->data, 0); +- else ++ if (dev->enable_pullup) { ++ if (dev->bus_master->set_pullup) { ++ dev->bus_master->set_pullup(dev-> ++ bus_master->data, ++ 0); ++ } else if (dev->bus_master->bitbang_pullup) { ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 1); ++ msleep(dev->pullup_duration); ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 0); ++ } ++ } else { + msleep(dev->pullup_duration); ++ } ++ + dev->pullup_duration = 0; + } + } +diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h +index d58594a32324..feae94256256 100644 +--- a/include/linux/w1-gpio.h ++++ b/include/linux/w1-gpio.h +@@ -18,6 +18,7 @@ + struct w1_gpio_platform_data { + unsigned int pin; + unsigned int is_open_drain:1; ++ unsigned int parasitic_power:1; + void (*enable_external_pullup)(int enable); + unsigned int ext_pullup_enable_pin; + unsigned int pullup_duration; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1058_ba575d578532384fefacea463812c5f8dc2fd1d0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1058_ba575d578532384fefacea463812c5f8dc2fd1d0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1058_ba575d578532384fefacea463812c5f8dc2fd1d0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1058_ba575d578532384fefacea463812c5f8dc2fd1d0.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,21 @@ +commit ba575d578532384fefacea463812c5f8dc2fd1d0 +Author: popcornmix +Date: Wed Jul 3 00:54:08 2013 +0100 + + Added Device IDs for August DVB-T 205 + +diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +index c583c638e468..d8cf15a0048e 100644 +--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c ++++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +@@ -1916,6 +1916,10 @@ static const struct usb_device_id rtl28xxu_id_table[] = { + &rtl28xxu_props, "Compro VideoMate U650F", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, + &rtl28xxu_props, "MaxMedia HU394-T", NULL) }, ++ { DVB_USB_DEVICE(USB_VID_GTEK, 0xb803 /*USB_PID_AUGUST_DVBT205*/, ++ &rtl28xxu_props, "August DVB-T 205", NULL) }, ++ { DVB_USB_DEVICE(USB_VID_GTEK, 0xa803 /*USB_PID_AUGUST_DVBT205*/, ++ &rtl28xxu_props, "August DVB-T 205", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03, + &rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1059_1f7ae1f4bc94acf308478c7c3f1a954d7001d98a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1059_1f7ae1f4bc94acf308478c7c3f1a954d7001d98a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1059_1f7ae1f4bc94acf308478c7c3f1a954d7001d98a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1059_1f7ae1f4bc94acf308478c7c3f1a954d7001d98a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,48 @@ +commit 1f7ae1f4bc94acf308478c7c3f1a954d7001d98a +Author: popcornmix +Date: Wed Dec 18 22:16:19 2013 +0000 + + config: Enable CONFIG_MEMCG, but leave it disabled (due to memory cost). Enable with cgroup_enable=memory. + +diff --git a/kernel/cgroup.c b/kernel/cgroup.c +index 4e2f3de0e40b..4b687fba53c5 100644 +--- a/kernel/cgroup.c ++++ b/kernel/cgroup.c +@@ -5626,7 +5626,7 @@ int __init cgroup_init_early(void) + return 0; + } + +-static u16 cgroup_disable_mask __initdata; ++static u16 cgroup_disable_mask __initdata = 1<<0; + + /** + * cgroup_init - cgroup initialization +@@ -6163,6 +6163,28 @@ static int __init cgroup_no_v1(char *str) + } + __setup("cgroup_no_v1=", cgroup_no_v1); + ++static int __init cgroup_enable(char *str) ++{ ++ struct cgroup_subsys *ss; ++ char *token; ++ int i; ++ ++ while ((token = strsep(&str, ",")) != NULL) { ++ if (!*token) ++ continue; ++ ++ for_each_subsys(ss, i) { ++ if (strcmp(token, ss->name) && ++ strcmp(token, ss->legacy_name)) ++ continue; ++ ++ cgroup_disable_mask &= ~(1 << i); ++ } ++ } ++ return 1; ++} ++__setup("cgroup_enable=", cgroup_enable); ++ + /** + * css_tryget_online_from_dir - get corresponding css from a cgroup dentry + * @dentry: directory dentry of interest diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1060_0923244e438d28061ff4383c69e507cbd1e4c200.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1060_0923244e438d28061ff4383c69e507cbd1e4c200.patch --- linux-4.9.13/debian/patches/rpi/rpi_1060_0923244e438d28061ff4383c69e507cbd1e4c200.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1060_0923244e438d28061ff4383c69e507cbd1e4c200.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,36 @@ +commit 0923244e438d28061ff4383c69e507cbd1e4c200 +Author: popcornmix +Date: Mon Jul 14 22:02:09 2014 +0100 + + hid: Reduce default mouse polling interval to 60Hz + + Reduces overhead when using X + +diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c +index ae83af649a60..4a7af9d0b910 100644 +--- a/drivers/hid/usbhid/hid-core.c ++++ b/drivers/hid/usbhid/hid-core.c +@@ -49,7 +49,7 @@ + * Module parameters. + */ + +-static unsigned int hid_mousepoll_interval; ++static unsigned int hid_mousepoll_interval = ~0; + module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); + MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); + +@@ -1083,8 +1083,12 @@ static int usbhid_start(struct hid_device *hid) + } + + /* Change the polling interval of mice. */ +- if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) +- interval = hid_mousepoll_interval; ++ if (hid->collection->usage == HID_GD_MOUSE) { ++ if (hid_mousepoll_interval == ~0 && interval < 16) ++ interval = 16; ++ else if (hid_mousepoll_interval != ~0 && hid_mousepoll_interval != 0) ++ interval = hid_mousepoll_interval; ++ } + + ret = -ENOMEM; + if (usb_endpoint_dir_in(endpoint)) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1061_f21cca5981c50f1296067c20a155f7f0fb68232e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1061_f21cca5981c50f1296067c20a155f7f0fb68232e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1061_f21cca5981c50f1296067c20a155f7f0fb68232e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1061_f21cca5981c50f1296067c20a155f7f0fb68232e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,354 @@ +commit f21cca5981c50f1296067c20a155f7f0fb68232e +Author: Gordon Hollingworth +Date: Tue May 12 14:47:56 2015 +0100 + + rpi-ft5406: Add touchscreen driver for pi LCD display + + Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected + + rpi-ft5406: Use firmware API + + RPI-FT5406: Enable aarch64 support through explicit iomem interface + + Signed-off-by: Gerhard de Clercq + +diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig +index efca0133e266..0bf78ff1ae88 100644 +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -638,6 +638,13 @@ config TOUCHSCREEN_EDT_FT5X06 + To compile this driver as a module, choose M here: the + module will be called edt-ft5x06. + ++config TOUCHSCREEN_RPI_FT5406 ++ tristate "Raspberry Pi FT5406 driver" ++ depends on RASPBERRYPI_FIRMWARE ++ help ++ Say Y here to enable the Raspberry Pi memory based FT5406 device ++ ++ + config TOUCHSCREEN_MIGOR + tristate "Renesas MIGO-R touchscreen" + depends on (SH_MIGOR || COMPILE_TEST) && I2C +diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile +index 81b86451782d..f720bc30ada9 100644 +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o + obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o + obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o + obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o ++obj-$(CONFIG_TOUCHSCREEN_RPI_FT5406) += rpi-ft5406.o + obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o + obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o + obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o +diff --git a/drivers/input/touchscreen/rpi-ft5406.c b/drivers/input/touchscreen/rpi-ft5406.c +new file mode 100644 +index 000000000000..9d7d05482355 +--- /dev/null ++++ b/drivers/input/touchscreen/rpi-ft5406.c +@@ -0,0 +1,292 @@ ++/* ++ * Driver for memory based ft5406 touchscreen ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MAXIMUM_SUPPORTED_POINTS 10 ++struct ft5406_regs { ++ uint8_t device_mode; ++ uint8_t gesture_id; ++ uint8_t num_points; ++ struct ft5406_touch { ++ uint8_t xh; ++ uint8_t xl; ++ uint8_t yh; ++ uint8_t yl; ++ uint8_t res1; ++ uint8_t res2; ++ } point[MAXIMUM_SUPPORTED_POINTS]; ++}; ++ ++#define SCREEN_WIDTH 800 ++#define SCREEN_HEIGHT 480 ++ ++struct ft5406 { ++ struct platform_device * pdev; ++ struct input_dev * input_dev; ++ void __iomem * ts_base; ++ dma_addr_t bus_addr; ++ struct task_struct * thread; ++}; ++ ++/* Thread to poll for touchscreen events ++ * ++ * This thread polls the memory based register copy of the ft5406 registers ++ * using the number of points register to know whether the copy has been ++ * updated (we write 99 to the memory copy, the GPU will write between ++ * 0 - 10 points) ++ */ ++static int ft5406_thread(void *arg) ++{ ++ struct ft5406 *ts = (struct ft5406 *) arg; ++ struct ft5406_regs regs; ++ int known_ids = 0; ++ ++ while(!kthread_should_stop()) ++ { ++ // 60fps polling ++ msleep_interruptible(17); ++ memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); ++ iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points)); ++ // Do not output if theres no new information (num_points is 99) ++ // or we have no touch points and don't need to release any ++ if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0))) ++ { ++ int i; ++ int modified_ids = 0, released_ids; ++ for(i = 0; i < regs.num_points; i++) ++ { ++ int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; ++ int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; ++ int touchid = (regs.point[i].yh >> 4) & 0xf; ++ ++ modified_ids |= 1 << touchid; ++ ++ if(!((1 << touchid) & known_ids)) ++ dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid); ++ ++ input_mt_slot(ts->input_dev, touchid); ++ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1); ++ ++ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x); ++ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y); ++ ++ } ++ ++ released_ids = known_ids & ~modified_ids; ++ for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++) ++ { ++ if(released_ids & (1<pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids); ++ input_mt_slot(ts->input_dev, i); ++ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0); ++ modified_ids &= ~(1 << i); ++ } ++ } ++ known_ids = modified_ids; ++ ++ input_mt_report_pointer_emulation(ts->input_dev, true); ++ input_sync(ts->input_dev); ++ } ++ ++ } ++ ++ return 0; ++} ++ ++static int ft5406_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct ft5406 * ts; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ u32 touchbuf; ++ ++ dev_info(dev, "Probing device\n"); ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ts = devm_kzalloc(dev, sizeof(struct ft5406), GFP_KERNEL); ++ if (!ts) { ++ dev_err(dev, "Failed to allocate memory\n"); ++ return -ENOMEM; ++ } ++ ++ ts->input_dev = input_allocate_device(); ++ if (!ts->input_dev) { ++ dev_err(dev, "Failed to allocate input device\n"); ++ return -ENOMEM; ++ } ++ ++ ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL); ++ if (!ts->ts_base) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", ++ __func__, PAGE_SIZE); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ touchbuf = (u32)ts->bus_addr; ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, ++ &touchbuf, sizeof(touchbuf)); ++ ++ if (err || touchbuf != 0) { ++ dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err); ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ ts->ts_base = 0; ++ ts->bus_addr = 0; ++ } ++ ++ if (!ts->ts_base) { ++ dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr); ++ ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, ++ &touchbuf, sizeof(touchbuf)); ++ if (err) { ++ dev_err(dev, "Failed to get touch buffer\n"); ++ goto out; ++ } ++ ++ if (!touchbuf) { ++ dev_err(dev, "Touchscreen not detected\n"); ++ err = -ENODEV; ++ goto out; ++ } ++ ++ dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf); ++ ++ // mmap the physical memory ++ touchbuf &= ~0xc0000000; ++ ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs)); ++ if (ts->ts_base == NULL) ++ { ++ dev_err(dev, "Failed to map physical address\n"); ++ err = -ENOMEM; ++ goto out; ++ } ++ } ++ platform_set_drvdata(pdev, ts); ++ ts->pdev = pdev; ++ ++ ts->input_dev->name = "FT5406 memory based driver"; ++ ++ __set_bit(EV_KEY, ts->input_dev->evbit); ++ __set_bit(EV_SYN, ts->input_dev->evbit); ++ __set_bit(EV_ABS, ts->input_dev->evbit); ++ ++ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, ++ SCREEN_WIDTH, 0, 0); ++ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, ++ SCREEN_HEIGHT, 0, 0); ++ ++ input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); ++ ++ input_set_drvdata(ts->input_dev, ts); ++ ++ err = input_register_device(ts->input_dev); ++ if (err) { ++ dev_err(dev, "could not register input device, %d\n", ++ err); ++ goto out; ++ } ++ ++ // create thread to poll the touch events ++ ts->thread = kthread_run(ft5406_thread, ts, "ft5406"); ++ if(ts->thread == NULL) ++ { ++ dev_err(dev, "Failed to create kernel thread"); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ return 0; ++ ++out: ++ if (ts->bus_addr) { ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ ts->bus_addr = 0; ++ ts->ts_base = NULL; ++ } else if (ts->ts_base) { ++ iounmap(ts->ts_base); ++ ts->ts_base = NULL; ++ } ++ if (ts->input_dev) { ++ input_unregister_device(ts->input_dev); ++ ts->input_dev = NULL; ++ } ++ return err; ++} ++ ++static int ft5406_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev); ++ ++ dev_info(dev, "Removing rpi-ft5406\n"); ++ ++ kthread_stop(ts->thread); ++ ++ if (ts->bus_addr) ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ else if (ts->ts_base) ++ iounmap(ts->ts_base); ++ if (ts->input_dev) ++ input_unregister_device(ts->input_dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id ft5406_match[] = { ++ { .compatible = "rpi,rpi-ft5406", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ft5406_match); ++ ++static struct platform_driver ft5406_driver = { ++ .driver = { ++ .name = "rpi-ft5406", ++ .owner = THIS_MODULE, ++ .of_match_table = ft5406_match, ++ }, ++ .probe = ft5406_probe, ++ .remove = ft5406_remove, ++}; ++ ++module_platform_driver(ft5406_driver); ++ ++MODULE_AUTHOR("Gordon Hollingworth"); ++MODULE_DESCRIPTION("Touchscreen driver for memory based FT5406"); ++MODULE_LICENSE("GPL"); +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index 227a107214a0..b0f6e33bd30c 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -115,6 +115,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1062_631fde34e2de1c7c43e76f94ae64e904ed8371ae.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1062_631fde34e2de1c7c43e76f94ae64e904ed8371ae.patch --- linux-4.9.13/debian/patches/rpi/rpi_1062_631fde34e2de1c7c43e76f94ae64e904ed8371ae.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1062_631fde34e2de1c7c43e76f94ae64e904ed8371ae.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1555 @@ +commit 631fde34e2de1c7c43e76f94ae64e904ed8371ae +Author: popcornmix +Date: Mon Nov 28 16:50:04 2016 +0000 + + Improve __copy_to_user and __copy_from_user performance + + Provide a __copy_from_user that uses memcpy. On BCM2708, use + optimised memcpy/memmove/memcmp/memset implementations. + + arch/arm: Add mmiocpy/set aliases for memcpy/set + + See: https://github.com/raspberrypi/linux/issues/1082 + + copy_from_user: CPU_SW_DOMAIN_PAN compatibility + + The downstream copy_from_user acceleration must also play nice with + CONFIG_CPU_SW_DOMAIN_PAN. + + See: https://github.com/raspberrypi/linux/issues/1381 + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h +index cf4f3aad0fc1..d69b70a6007d 100644 +--- a/arch/arm/include/asm/string.h ++++ b/arch/arm/include/asm/string.h +@@ -24,6 +24,11 @@ extern void * memchr(const void *, int, __kernel_size_t); + #define __HAVE_ARCH_MEMSET + extern void * memset(void *, int, __kernel_size_t); + ++#ifdef CONFIG_BCM2835_FAST_MEMCPY ++#define __HAVE_ARCH_MEMCMP ++extern int memcmp(const void *, const void *, size_t); ++#endif ++ + extern void __memzero(void *ptr, __kernel_size_t n); + + #define memset(p,v,n) \ +diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h +index 1f59ea051bab..028d151b80a3 100644 +--- a/arch/arm/include/asm/uaccess.h ++++ b/arch/arm/include/asm/uaccess.h +@@ -477,6 +477,9 @@ do { \ + extern unsigned long __must_check + arm_copy_from_user(void *to, const void __user *from, unsigned long n); + ++extern unsigned long __must_check ++__copy_from_user_std(void *to, const void __user *from, unsigned long n); ++ + static inline unsigned long __must_check + __copy_from_user(void *to, const void __user *from, unsigned long n) + { +diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile +index 27f4d96258a2..96b390c9301f 100644 +--- a/arch/arm/lib/Makefile ++++ b/arch/arm/lib/Makefile +@@ -6,9 +6,8 @@ + + lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ + csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ +- delay.o delay-loop.o findbit.o memchr.o memcpy.o \ +- memmove.o memset.o memzero.o setbit.o \ +- strchr.o strrchr.o \ ++ delay.o delay-loop.o findbit.o memchr.o memzero.o \ ++ setbit.o strchr.o strrchr.o \ + testchangebit.o testclearbit.o testsetbit.o \ + ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + ucmpdi2.o lib1funcs.o div64.o \ +@@ -18,6 +17,16 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ + mmu-y := clear_user.o copy_page.o getuser.o putuser.o \ + copy_from_user.o copy_to_user.o + ++# Choose optimised implementations for Raspberry Pi ++ifeq ($(CONFIG_BCM2835_FAST_MEMCPY),y) ++ CFLAGS_uaccess_with_memcpy.o += -DCOPY_FROM_USER_THRESHOLD=1600 ++ CFLAGS_uaccess_with_memcpy.o += -DCOPY_TO_USER_THRESHOLD=672 ++ obj-$(CONFIG_MODULES) += exports_rpi.o ++ lib-y += memcpy_rpi.o memmove_rpi.o memset_rpi.o memcmp_rpi.o ++else ++ lib-y += memcpy.o memmove.o memset.o ++endif ++ + # using lib_ here won't override already available weak symbols + obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o + +diff --git a/arch/arm/lib/arm-mem.h b/arch/arm/lib/arm-mem.h +new file mode 100644 +index 000000000000..5d4bda19ad20 +--- /dev/null ++++ b/arch/arm/lib/arm-mem.h +@@ -0,0 +1,159 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++.macro myfunc fname ++ .func fname ++ .global fname ++fname: ++.endm ++ ++.macro preload_leading_step1 backwards, ptr, base ++/* If the destination is already 16-byte aligned, then we need to preload ++ * between 0 and prefetch_distance (inclusive) cache lines ahead so there ++ * are no gaps when the inner loop starts. ++ */ ++ .if backwards ++ sub ptr, base, #1 ++ bic ptr, ptr, #31 ++ .else ++ bic ptr, base, #31 ++ .endif ++ .set OFFSET, 0 ++ .rept prefetch_distance+1 ++ pld [ptr, #OFFSET] ++ .if backwards ++ .set OFFSET, OFFSET-32 ++ .else ++ .set OFFSET, OFFSET+32 ++ .endif ++ .endr ++.endm ++ ++.macro preload_leading_step2 backwards, ptr, base, leading_bytes, tmp ++/* However, if the destination is not 16-byte aligned, we may need to ++ * preload one more cache line than that. The question we need to ask is: ++ * are the leading bytes more than the amount by which the source ++ * pointer will be rounded down for preloading, and if so, by how many ++ * cache lines? ++ */ ++ .if backwards ++/* Here we compare against how many bytes we are into the ++ * cache line, counting down from the highest such address. ++ * Effectively, we want to calculate ++ * leading_bytes = dst&15 ++ * cacheline_offset = 31-((src-leading_bytes-1)&31) ++ * extra_needed = leading_bytes - cacheline_offset ++ * and test if extra_needed is <= 0, or rearranging: ++ * leading_bytes + (src-leading_bytes-1)&31 <= 31 ++ */ ++ mov tmp, base, lsl #32-5 ++ sbc tmp, tmp, leading_bytes, lsl #32-5 ++ adds tmp, tmp, leading_bytes, lsl #32-5 ++ bcc 61f ++ pld [ptr, #-32*(prefetch_distance+1)] ++ .else ++/* Effectively, we want to calculate ++ * leading_bytes = (-dst)&15 ++ * cacheline_offset = (src+leading_bytes)&31 ++ * extra_needed = leading_bytes - cacheline_offset ++ * and test if extra_needed is <= 0. ++ */ ++ mov tmp, base, lsl #32-5 ++ add tmp, tmp, leading_bytes, lsl #32-5 ++ rsbs tmp, tmp, leading_bytes, lsl #32-5 ++ bls 61f ++ pld [ptr, #32*(prefetch_distance+1)] ++ .endif ++61: ++.endm ++ ++.macro preload_trailing backwards, base, remain, tmp ++ /* We need either 0, 1 or 2 extra preloads */ ++ .if backwards ++ rsb tmp, base, #0 ++ mov tmp, tmp, lsl #32-5 ++ .else ++ mov tmp, base, lsl #32-5 ++ .endif ++ adds tmp, tmp, remain, lsl #32-5 ++ adceqs tmp, tmp, #0 ++ /* The instruction above has two effects: ensures Z is only ++ * set if C was clear (so Z indicates that both shifted quantities ++ * were 0), and clears C if Z was set (so C indicates that the sum ++ * of the shifted quantities was greater and not equal to 32) */ ++ beq 82f ++ .if backwards ++ sub tmp, base, #1 ++ bic tmp, tmp, #31 ++ .else ++ bic tmp, base, #31 ++ .endif ++ bcc 81f ++ .if backwards ++ pld [tmp, #-32*(prefetch_distance+1)] ++81: ++ pld [tmp, #-32*prefetch_distance] ++ .else ++ pld [tmp, #32*(prefetch_distance+2)] ++81: ++ pld [tmp, #32*(prefetch_distance+1)] ++ .endif ++82: ++.endm ++ ++.macro preload_all backwards, narrow_case, shift, base, remain, tmp0, tmp1 ++ .if backwards ++ sub tmp0, base, #1 ++ bic tmp0, tmp0, #31 ++ pld [tmp0] ++ sub tmp1, base, remain, lsl #shift ++ .else ++ bic tmp0, base, #31 ++ pld [tmp0] ++ add tmp1, base, remain, lsl #shift ++ sub tmp1, tmp1, #1 ++ .endif ++ bic tmp1, tmp1, #31 ++ cmp tmp1, tmp0 ++ beq 92f ++ .if narrow_case ++ /* In this case, all the data fits in either 1 or 2 cache lines */ ++ pld [tmp1] ++ .else ++91: ++ .if backwards ++ sub tmp0, tmp0, #32 ++ .else ++ add tmp0, tmp0, #32 ++ .endif ++ cmp tmp0, tmp1 ++ pld [tmp0] ++ bne 91b ++ .endif ++92: ++.endm +diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S +index 7a4b06049001..fb40a1b3a5b7 100644 +--- a/arch/arm/lib/copy_from_user.S ++++ b/arch/arm/lib/copy_from_user.S +@@ -89,11 +89,13 @@ + + .text + +-ENTRY(arm_copy_from_user) ++ENTRY(__copy_from_user_std) ++WEAK(arm_copy_from_user) + + #include "copy_template.S" + + ENDPROC(arm_copy_from_user) ++ENDPROC(__copy_from_user_std) + + .pushsection .fixup,"ax" + .align 0 +diff --git a/arch/arm/lib/exports_rpi.c b/arch/arm/lib/exports_rpi.c +new file mode 100644 +index 000000000000..1f826047db75 +--- /dev/null ++++ b/arch/arm/lib/exports_rpi.c +@@ -0,0 +1,37 @@ ++/** ++ * Copyright (c) 2014, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++ ++EXPORT_SYMBOL(memcmp); +diff --git a/arch/arm/lib/memcmp_rpi.S b/arch/arm/lib/memcmp_rpi.S +new file mode 100644 +index 000000000000..bf6e4edfc9d3 +--- /dev/null ++++ b/arch/arm/lib/memcmp_rpi.S +@@ -0,0 +1,285 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++.macro memcmp_process_head unaligned ++ .if unaligned ++ ldr DAT0, [S_1], #4 ++ ldr DAT1, [S_1], #4 ++ ldr DAT2, [S_1], #4 ++ ldr DAT3, [S_1], #4 ++ .else ++ ldmia S_1!, {DAT0, DAT1, DAT2, DAT3} ++ .endif ++ ldmia S_2!, {DAT4, DAT5, DAT6, DAT7} ++.endm ++ ++.macro memcmp_process_tail ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ cmpeq DAT3, DAT7 ++ bne 200f ++.endm ++ ++.macro memcmp_leading_31bytes ++ movs DAT0, OFF, lsl #31 ++ ldrmib DAT0, [S_1], #1 ++ ldrcsh DAT1, [S_1], #2 ++ ldrmib DAT4, [S_2], #1 ++ ldrcsh DAT5, [S_2], #2 ++ movpl DAT0, #0 ++ movcc DAT1, #0 ++ movpl DAT4, #0 ++ movcc DAT5, #0 ++ submi N, N, #1 ++ subcs N, N, #2 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ bne 200f ++ movs DAT0, OFF, lsl #29 ++ ldrmi DAT0, [S_1], #4 ++ ldrcs DAT1, [S_1], #4 ++ ldrcs DAT2, [S_1], #4 ++ ldrmi DAT4, [S_2], #4 ++ ldmcsia S_2!, {DAT5, DAT6} ++ movpl DAT0, #0 ++ movcc DAT1, #0 ++ movcc DAT2, #0 ++ movpl DAT4, #0 ++ movcc DAT5, #0 ++ movcc DAT6, #0 ++ submi N, N, #4 ++ subcs N, N, #8 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ bne 200f ++ tst OFF, #16 ++ beq 105f ++ memcmp_process_head 1 ++ sub N, N, #16 ++ memcmp_process_tail ++105: ++.endm ++ ++.macro memcmp_trailing_15bytes unaligned ++ movs N, N, lsl #29 ++ .if unaligned ++ ldrcs DAT0, [S_1], #4 ++ ldrcs DAT1, [S_1], #4 ++ .else ++ ldmcsia S_1!, {DAT0, DAT1} ++ .endif ++ ldrmi DAT2, [S_1], #4 ++ ldmcsia S_2!, {DAT4, DAT5} ++ ldrmi DAT6, [S_2], #4 ++ movcc DAT0, #0 ++ movcc DAT1, #0 ++ movpl DAT2, #0 ++ movcc DAT4, #0 ++ movcc DAT5, #0 ++ movpl DAT6, #0 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ bne 200f ++ movs N, N, lsl #2 ++ ldrcsh DAT0, [S_1], #2 ++ ldrmib DAT1, [S_1] ++ ldrcsh DAT4, [S_2], #2 ++ ldrmib DAT5, [S_2] ++ movcc DAT0, #0 ++ movpl DAT1, #0 ++ movcc DAT4, #0 ++ movpl DAT5, #0 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ bne 200f ++.endm ++ ++.macro memcmp_long_inner_loop unaligned ++110: ++ memcmp_process_head unaligned ++ pld [S_2, #prefetch_distance*32 + 16] ++ memcmp_process_tail ++ memcmp_process_head unaligned ++ pld [S_1, OFF] ++ memcmp_process_tail ++ subs N, N, #32 ++ bhs 110b ++ /* Just before the final (prefetch_distance+1) 32-byte blocks, ++ * deal with final preloads */ ++ preload_trailing 0, S_1, N, DAT0 ++ preload_trailing 0, S_2, N, DAT0 ++ add N, N, #(prefetch_distance+2)*32 - 16 ++120: ++ memcmp_process_head unaligned ++ memcmp_process_tail ++ subs N, N, #16 ++ bhs 120b ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcmp_trailing_15bytes unaligned ++199: /* Reached end without detecting a difference */ ++ mov a1, #0 ++ setend le ++ pop {DAT1-DAT6, pc} ++.endm ++ ++.macro memcmp_short_inner_loop unaligned ++ subs N, N, #16 /* simplifies inner loop termination */ ++ blo 122f ++120: ++ memcmp_process_head unaligned ++ memcmp_process_tail ++ subs N, N, #16 ++ bhs 120b ++122: /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcmp_trailing_15bytes unaligned ++199: /* Reached end without detecting a difference */ ++ mov a1, #0 ++ setend le ++ pop {DAT1-DAT6, pc} ++.endm ++ ++/* ++ * int memcmp(const void *s1, const void *s2, size_t n); ++ * On entry: ++ * a1 = pointer to buffer 1 ++ * a2 = pointer to buffer 2 ++ * a3 = number of bytes to compare (as unsigned chars) ++ * On exit: ++ * a1 = >0/=0/<0 if s1 >/=/< s2 ++ */ ++ ++.set prefetch_distance, 2 ++ ++ENTRY(memcmp) ++ S_1 .req a1 ++ S_2 .req a2 ++ N .req a3 ++ DAT0 .req a4 ++ DAT1 .req v1 ++ DAT2 .req v2 ++ DAT3 .req v3 ++ DAT4 .req v4 ++ DAT5 .req v5 ++ DAT6 .req v6 ++ DAT7 .req ip ++ OFF .req lr ++ ++ push {DAT1-DAT6, lr} ++ setend be /* lowest-addressed bytes are most significant */ ++ ++ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ ++ cmp N, #(prefetch_distance+3)*32 - 1 ++ blo 170f ++ ++ /* Long case */ ++ /* Adjust N so that the decrement instruction can also test for ++ * inner loop termination. We want it to stop when there are ++ * (prefetch_distance+1) complete blocks to go. */ ++ sub N, N, #(prefetch_distance+2)*32 ++ preload_leading_step1 0, DAT0, S_1 ++ preload_leading_step1 0, DAT1, S_2 ++ tst S_2, #31 ++ beq 154f ++ rsb OFF, S_2, #0 /* no need to AND with 15 here */ ++ preload_leading_step2 0, DAT0, S_1, OFF, DAT2 ++ preload_leading_step2 0, DAT1, S_2, OFF, DAT2 ++ memcmp_leading_31bytes ++154: /* Second source now cacheline (32-byte) aligned; we have at ++ * least one prefetch to go. */ ++ /* Prefetch offset is best selected such that it lies in the ++ * first 8 of each 32 bytes - but it's just as easy to aim for ++ * the first one */ ++ and OFF, S_1, #31 ++ rsb OFF, OFF, #32*prefetch_distance ++ tst S_1, #3 ++ bne 140f ++ memcmp_long_inner_loop 0 ++140: memcmp_long_inner_loop 1 ++ ++170: /* Short case */ ++ teq N, #0 ++ beq 199f ++ preload_all 0, 0, 0, S_1, N, DAT0, DAT1 ++ preload_all 0, 0, 0, S_2, N, DAT0, DAT1 ++ tst S_2, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199f ++ ldrb DAT0, [S_1], #1 ++ ldrb DAT4, [S_2], #1 ++ cmp DAT0, DAT4 ++ bne 200f ++ tst S_2, #3 ++ bne 172b ++174: /* Second source now 4-byte aligned; we have 0 or more bytes to go */ ++ tst S_1, #3 ++ bne 140f ++ memcmp_short_inner_loop 0 ++140: memcmp_short_inner_loop 1 ++ ++200: /* Difference found: determine sign. */ ++ movhi a1, #1 ++ movlo a1, #-1 ++ setend le ++ pop {DAT1-DAT6, pc} ++ ++ .unreq S_1 ++ .unreq S_2 ++ .unreq N ++ .unreq DAT0 ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ .unreq DAT4 ++ .unreq DAT5 ++ .unreq DAT6 ++ .unreq DAT7 ++ .unreq OFF ++ENDPROC(memcmp) +diff --git a/arch/arm/lib/memcpy_rpi.S b/arch/arm/lib/memcpy_rpi.S +new file mode 100644 +index 000000000000..30f8a9089a83 +--- /dev/null ++++ b/arch/arm/lib/memcpy_rpi.S +@@ -0,0 +1,61 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++#include "memcpymove.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memcpy(void * restrict s1, const void * restrict s2, size_t n); ++ * On entry: ++ * a1 = pointer to destination ++ * a2 = pointer to source ++ * a3 = number of bytes to copy ++ * On exit: ++ * a1 preserved ++ */ ++ ++.set prefetch_distance, 3 ++ ++ENTRY(mmiocpy) ++ENTRY(memcpy) ++ memcpy 0 ++ENDPROC(memcpy) ++ENDPROC(mmiocpy) +diff --git a/arch/arm/lib/memcpymove.h b/arch/arm/lib/memcpymove.h +new file mode 100644 +index 000000000000..d8be5849c860 +--- /dev/null ++++ b/arch/arm/lib/memcpymove.h +@@ -0,0 +1,506 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++.macro unaligned_words backwards, align, use_pld, words, r0, r1, r2, r3, r4, r5, r6, r7, r8 ++ .if words == 1 ++ .if backwards ++ mov r1, r0, lsl #32-align*8 ++ ldr r0, [S, #-4]! ++ orr r1, r1, r0, lsr #align*8 ++ str r1, [D, #-4]! ++ .else ++ mov r0, r1, lsr #align*8 ++ ldr r1, [S, #4]! ++ orr r0, r0, r1, lsl #32-align*8 ++ str r0, [D], #4 ++ .endif ++ .elseif words == 2 ++ .if backwards ++ ldr r1, [S, #-4]! ++ mov r2, r0, lsl #32-align*8 ++ ldr r0, [S, #-4]! ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r1, r2} ++ .else ++ ldr r1, [S, #4]! ++ mov r0, r2, lsr #align*8 ++ ldr r2, [S, #4]! ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ stmia D!, {r0, r1} ++ .endif ++ .elseif words == 4 ++ .if backwards ++ ldmdb S!, {r2, r3} ++ mov r4, r0, lsl #32-align*8 ++ ldmdb S!, {r0, r1} ++ orr r4, r4, r3, lsr #align*8 ++ mov r3, r3, lsl #32-align*8 ++ orr r3, r3, r2, lsr #align*8 ++ mov r2, r2, lsl #32-align*8 ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r1, r2, r3, r4} ++ .else ++ ldmib S!, {r1, r2} ++ mov r0, r4, lsr #align*8 ++ ldmib S!, {r3, r4} ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ mov r2, r2, lsr #align*8 ++ orr r2, r2, r3, lsl #32-align*8 ++ mov r3, r3, lsr #align*8 ++ orr r3, r3, r4, lsl #32-align*8 ++ stmia D!, {r0, r1, r2, r3} ++ .endif ++ .elseif words == 8 ++ .if backwards ++ ldmdb S!, {r4, r5, r6, r7} ++ mov r8, r0, lsl #32-align*8 ++ ldmdb S!, {r0, r1, r2, r3} ++ .if use_pld ++ pld [S, OFF] ++ .endif ++ orr r8, r8, r7, lsr #align*8 ++ mov r7, r7, lsl #32-align*8 ++ orr r7, r7, r6, lsr #align*8 ++ mov r6, r6, lsl #32-align*8 ++ orr r6, r6, r5, lsr #align*8 ++ mov r5, r5, lsl #32-align*8 ++ orr r5, r5, r4, lsr #align*8 ++ mov r4, r4, lsl #32-align*8 ++ orr r4, r4, r3, lsr #align*8 ++ mov r3, r3, lsl #32-align*8 ++ orr r3, r3, r2, lsr #align*8 ++ mov r2, r2, lsl #32-align*8 ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r5, r6, r7, r8} ++ stmdb D!, {r1, r2, r3, r4} ++ .else ++ ldmib S!, {r1, r2, r3, r4} ++ mov r0, r8, lsr #align*8 ++ ldmib S!, {r5, r6, r7, r8} ++ .if use_pld ++ pld [S, OFF] ++ .endif ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ mov r2, r2, lsr #align*8 ++ orr r2, r2, r3, lsl #32-align*8 ++ mov r3, r3, lsr #align*8 ++ orr r3, r3, r4, lsl #32-align*8 ++ mov r4, r4, lsr #align*8 ++ orr r4, r4, r5, lsl #32-align*8 ++ mov r5, r5, lsr #align*8 ++ orr r5, r5, r6, lsl #32-align*8 ++ mov r6, r6, lsr #align*8 ++ orr r6, r6, r7, lsl #32-align*8 ++ mov r7, r7, lsr #align*8 ++ orr r7, r7, r8, lsl #32-align*8 ++ stmia D!, {r0, r1, r2, r3} ++ stmia D!, {r4, r5, r6, r7} ++ .endif ++ .endif ++.endm ++ ++.macro memcpy_leading_15bytes backwards, align ++ movs DAT1, DAT2, lsl #31 ++ sub N, N, DAT2 ++ .if backwards ++ ldrmib DAT0, [S, #-1]! ++ ldrcsh DAT1, [S, #-2]! ++ strmib DAT0, [D, #-1]! ++ strcsh DAT1, [D, #-2]! ++ .else ++ ldrmib DAT0, [S], #1 ++ ldrcsh DAT1, [S], #2 ++ strmib DAT0, [D], #1 ++ strcsh DAT1, [D], #2 ++ .endif ++ movs DAT1, DAT2, lsl #29 ++ .if backwards ++ ldrmi DAT0, [S, #-4]! ++ .if align == 0 ++ ldmcsdb S!, {DAT1, DAT2} ++ .else ++ ldrcs DAT2, [S, #-4]! ++ ldrcs DAT1, [S, #-4]! ++ .endif ++ strmi DAT0, [D, #-4]! ++ stmcsdb D!, {DAT1, DAT2} ++ .else ++ ldrmi DAT0, [S], #4 ++ .if align == 0 ++ ldmcsia S!, {DAT1, DAT2} ++ .else ++ ldrcs DAT1, [S], #4 ++ ldrcs DAT2, [S], #4 ++ .endif ++ strmi DAT0, [D], #4 ++ stmcsia D!, {DAT1, DAT2} ++ .endif ++.endm ++ ++.macro memcpy_trailing_15bytes backwards, align ++ movs N, N, lsl #29 ++ .if backwards ++ .if align == 0 ++ ldmcsdb S!, {DAT0, DAT1} ++ .else ++ ldrcs DAT1, [S, #-4]! ++ ldrcs DAT0, [S, #-4]! ++ .endif ++ ldrmi DAT2, [S, #-4]! ++ stmcsdb D!, {DAT0, DAT1} ++ strmi DAT2, [D, #-4]! ++ .else ++ .if align == 0 ++ ldmcsia S!, {DAT0, DAT1} ++ .else ++ ldrcs DAT0, [S], #4 ++ ldrcs DAT1, [S], #4 ++ .endif ++ ldrmi DAT2, [S], #4 ++ stmcsia D!, {DAT0, DAT1} ++ strmi DAT2, [D], #4 ++ .endif ++ movs N, N, lsl #2 ++ .if backwards ++ ldrcsh DAT0, [S, #-2]! ++ ldrmib DAT1, [S, #-1] ++ strcsh DAT0, [D, #-2]! ++ strmib DAT1, [D, #-1] ++ .else ++ ldrcsh DAT0, [S], #2 ++ ldrmib DAT1, [S] ++ strcsh DAT0, [D], #2 ++ strmib DAT1, [D] ++ .endif ++.endm ++ ++.macro memcpy_long_inner_loop backwards, align ++ .if align != 0 ++ .if backwards ++ ldr DAT0, [S, #-align]! ++ .else ++ ldr LAST, [S, #-align]! ++ .endif ++ .endif ++110: ++ .if align == 0 ++ .if backwards ++ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ pld [S, OFF] ++ stmdb D!, {DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT0, DAT1, DAT2, DAT3} ++ .else ++ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ pld [S, OFF] ++ stmia D!, {DAT0, DAT1, DAT2, DAT3} ++ stmia D!, {DAT4, DAT5, DAT6, LAST} ++ .endif ++ .else ++ unaligned_words backwards, align, 1, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST ++ .endif ++ subs N, N, #32 ++ bhs 110b ++ /* Just before the final (prefetch_distance+1) 32-byte blocks, deal with final preloads */ ++ preload_trailing backwards, S, N, OFF ++ add N, N, #(prefetch_distance+2)*32 - 32 ++120: ++ .if align == 0 ++ .if backwards ++ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT0, DAT1, DAT2, DAT3} ++ .else ++ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ stmia D!, {DAT0, DAT1, DAT2, DAT3} ++ stmia D!, {DAT4, DAT5, DAT6, LAST} ++ .endif ++ .else ++ unaligned_words backwards, align, 0, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST ++ .endif ++ subs N, N, #32 ++ bhs 120b ++ tst N, #16 ++ .if align == 0 ++ .if backwards ++ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} ++ stmnedb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldmneia S!, {DAT0, DAT1, DAT2, LAST} ++ stmneia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ .else ++ beq 130f ++ unaligned_words backwards, align, 0, 4, DAT0, DAT1, DAT2, DAT3, LAST ++130: ++ .endif ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ .if align != 0 ++ add S, S, #align ++ .endif ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {DAT3, DAT4, DAT5, DAT6, DAT7} ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy_medium_inner_loop backwards, align ++120: ++ .if backwards ++ .if align == 0 ++ ldmdb S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldr LAST, [S, #-4]! ++ ldr DAT2, [S, #-4]! ++ ldr DAT1, [S, #-4]! ++ ldr DAT0, [S, #-4]! ++ .endif ++ stmdb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ .if align == 0 ++ ldmia S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldr DAT0, [S], #4 ++ ldr DAT1, [S], #4 ++ ldr DAT2, [S], #4 ++ ldr LAST, [S], #4 ++ .endif ++ stmia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ subs N, N, #16 ++ bhs 120b ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy_short_inner_loop backwards, align ++ tst N, #16 ++ .if backwards ++ .if align == 0 ++ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldrne LAST, [S, #-4]! ++ ldrne DAT2, [S, #-4]! ++ ldrne DAT1, [S, #-4]! ++ ldrne DAT0, [S, #-4]! ++ .endif ++ stmnedb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ .if align == 0 ++ ldmneia S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldrne DAT0, [S], #4 ++ ldrne DAT1, [S], #4 ++ ldrne DAT2, [S], #4 ++ ldrne LAST, [S], #4 ++ .endif ++ stmneia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy backwards ++ D .req a1 ++ S .req a2 ++ N .req a3 ++ DAT0 .req a4 ++ DAT1 .req v1 ++ DAT2 .req v2 ++ DAT3 .req v3 ++ DAT4 .req v4 ++ DAT5 .req v5 ++ DAT6 .req v6 ++ DAT7 .req sl ++ LAST .req ip ++ OFF .req lr ++ ++ .cfi_startproc ++ ++ push {D, DAT1, DAT2, lr} ++ ++ .cfi_def_cfa_offset 16 ++ .cfi_rel_offset D, 0 ++ .cfi_undefined S ++ .cfi_undefined N ++ .cfi_undefined DAT0 ++ .cfi_rel_offset DAT1, 4 ++ .cfi_rel_offset DAT2, 8 ++ .cfi_undefined LAST ++ .cfi_rel_offset lr, 12 ++ ++ .if backwards ++ add D, D, N ++ add S, S, N ++ .endif ++ ++ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ ++ cmp N, #31 ++ blo 170f ++ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ ++ cmp N, #(prefetch_distance+3)*32 - 1 ++ blo 160f ++ ++ /* Long case */ ++ push {DAT3, DAT4, DAT5, DAT6, DAT7} ++ ++ .cfi_def_cfa_offset 36 ++ .cfi_rel_offset D, 20 ++ .cfi_rel_offset DAT1, 24 ++ .cfi_rel_offset DAT2, 28 ++ .cfi_rel_offset DAT3, 0 ++ .cfi_rel_offset DAT4, 4 ++ .cfi_rel_offset DAT5, 8 ++ .cfi_rel_offset DAT6, 12 ++ .cfi_rel_offset DAT7, 16 ++ .cfi_rel_offset lr, 32 ++ ++ /* Adjust N so that the decrement instruction can also test for ++ * inner loop termination. We want it to stop when there are ++ * (prefetch_distance+1) complete blocks to go. */ ++ sub N, N, #(prefetch_distance+2)*32 ++ preload_leading_step1 backwards, DAT0, S ++ .if backwards ++ /* Bug in GAS: it accepts, but mis-assembles the instruction ++ * ands DAT2, D, #60, 2 ++ * which sets DAT2 to the number of leading bytes until destination is aligned and also clears C (sets borrow) ++ */ ++ .word 0xE210513C ++ beq 154f ++ .else ++ ands DAT2, D, #15 ++ beq 154f ++ rsb DAT2, DAT2, #16 /* number of leading bytes until destination aligned */ ++ .endif ++ preload_leading_step2 backwards, DAT0, S, DAT2, OFF ++ memcpy_leading_15bytes backwards, 1 ++154: /* Destination now 16-byte aligned; we have at least one prefetch as well as at least one 16-byte output block */ ++ /* Prefetch offset is best selected such that it lies in the first 8 of each 32 bytes - but it's just as easy to aim for the first one */ ++ .if backwards ++ rsb OFF, S, #3 ++ and OFF, OFF, #28 ++ sub OFF, OFF, #32*(prefetch_distance+1) ++ .else ++ and OFF, S, #28 ++ rsb OFF, OFF, #32*prefetch_distance ++ .endif ++ movs DAT0, S, lsl #31 ++ bhi 157f ++ bcs 156f ++ bmi 155f ++ memcpy_long_inner_loop backwards, 0 ++155: memcpy_long_inner_loop backwards, 1 ++156: memcpy_long_inner_loop backwards, 2 ++157: memcpy_long_inner_loop backwards, 3 ++ ++ .cfi_def_cfa_offset 16 ++ .cfi_rel_offset D, 0 ++ .cfi_rel_offset DAT1, 4 ++ .cfi_rel_offset DAT2, 8 ++ .cfi_same_value DAT3 ++ .cfi_same_value DAT4 ++ .cfi_same_value DAT5 ++ .cfi_same_value DAT6 ++ .cfi_same_value DAT7 ++ .cfi_rel_offset lr, 12 ++ ++160: /* Medium case */ ++ preload_all backwards, 0, 0, S, N, DAT2, OFF ++ sub N, N, #16 /* simplifies inner loop termination */ ++ .if backwards ++ ands DAT2, D, #15 ++ beq 164f ++ .else ++ ands DAT2, D, #15 ++ beq 164f ++ rsb DAT2, DAT2, #16 ++ .endif ++ memcpy_leading_15bytes backwards, align ++164: /* Destination now 16-byte aligned; we have at least one 16-byte output block */ ++ tst S, #3 ++ bne 140f ++ memcpy_medium_inner_loop backwards, 0 ++140: memcpy_medium_inner_loop backwards, 1 ++ ++170: /* Short case, less than 31 bytes, so no guarantee of at least one 16-byte block */ ++ teq N, #0 ++ beq 199f ++ preload_all backwards, 1, 0, S, N, DAT2, LAST ++ tst D, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199f ++ .if backwards ++ ldrb DAT0, [S, #-1]! ++ strb DAT0, [D, #-1]! ++ .else ++ ldrb DAT0, [S], #1 ++ strb DAT0, [D], #1 ++ .endif ++ tst D, #3 ++ bne 172b ++174: /* Destination now 4-byte aligned; we have 0 or more output bytes to go */ ++ tst S, #3 ++ bne 140f ++ memcpy_short_inner_loop backwards, 0 ++140: memcpy_short_inner_loop backwards, 1 ++ ++ .cfi_endproc ++ ++ .unreq D ++ .unreq S ++ .unreq N ++ .unreq DAT0 ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ .unreq DAT4 ++ .unreq DAT5 ++ .unreq DAT6 ++ .unreq DAT7 ++ .unreq LAST ++ .unreq OFF ++.endm +diff --git a/arch/arm/lib/memmove_rpi.S b/arch/arm/lib/memmove_rpi.S +new file mode 100644 +index 000000000000..8b0760c0904c +--- /dev/null ++++ b/arch/arm/lib/memmove_rpi.S +@@ -0,0 +1,61 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++#include "memcpymove.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memmove(void *s1, const void *s2, size_t n); ++ * On entry: ++ * a1 = pointer to destination ++ * a2 = pointer to source ++ * a3 = number of bytes to copy ++ * On exit: ++ * a1 preserved ++ */ ++ ++.set prefetch_distance, 3 ++ ++ENTRY(memmove) ++ cmp a2, a1 ++ bpl memcpy /* pl works even over -1 - 0 and 0x7fffffff - 0x80000000 boundaries */ ++ memcpy 1 ++ENDPROC(memmove) +diff --git a/arch/arm/lib/memset_rpi.S b/arch/arm/lib/memset_rpi.S +new file mode 100644 +index 000000000000..70674158d76c +--- /dev/null ++++ b/arch/arm/lib/memset_rpi.S +@@ -0,0 +1,123 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memset(void *s, int c, size_t n); ++ * On entry: ++ * a1 = pointer to buffer to fill ++ * a2 = byte pattern to fill with (caller-narrowed) ++ * a3 = number of bytes to fill ++ * On exit: ++ * a1 preserved ++ */ ++ENTRY(mmioset) ++ENTRY(memset) ++ S .req a1 ++ DAT0 .req a2 ++ N .req a3 ++ DAT1 .req a4 ++ DAT2 .req ip ++ DAT3 .req lr ++ ++ orr DAT0, DAT0, lsl #8 ++ push {S, lr} ++ orr DAT0, DAT0, lsl #16 ++ mov DAT1, DAT0 ++ ++ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ ++ cmp N, #31 ++ blo 170f ++ ++161: sub N, N, #16 /* simplifies inner loop termination */ ++ /* Leading words and bytes */ ++ tst S, #15 ++ beq 164f ++ rsb DAT3, S, #0 /* bits 0-3 = number of leading bytes until aligned */ ++ movs DAT2, DAT3, lsl #31 ++ submi N, N, #1 ++ strmib DAT0, [S], #1 ++ subcs N, N, #2 ++ strcsh DAT0, [S], #2 ++ movs DAT2, DAT3, lsl #29 ++ submi N, N, #4 ++ strmi DAT0, [S], #4 ++ subcs N, N, #8 ++ stmcsia S!, {DAT0, DAT1} ++164: /* Delayed set up of DAT2 and DAT3 so we could use them as scratch registers above */ ++ mov DAT2, DAT0 ++ mov DAT3, DAT0 ++ /* Now the inner loop of 16-byte stores */ ++165: stmia S!, {DAT0, DAT1, DAT2, DAT3} ++ subs N, N, #16 ++ bhs 165b ++166: /* Trailing words and bytes */ ++ movs N, N, lsl #29 ++ stmcsia S!, {DAT0, DAT1} ++ strmi DAT0, [S], #4 ++ movs N, N, lsl #2 ++ strcsh DAT0, [S], #2 ++ strmib DAT0, [S] ++199: pop {S, pc} ++ ++170: /* Short case */ ++ mov DAT2, DAT0 ++ mov DAT3, DAT0 ++ tst S, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199b ++ strb DAT0, [S], #1 ++ tst S, #3 ++ bne 172b ++174: tst N, #16 ++ stmneia S!, {DAT0, DAT1, DAT2, DAT3} ++ b 166b ++ ++ .unreq S ++ .unreq DAT0 ++ .unreq N ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ENDPROC(memset) ++ENDPROC(mmioset) +diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c +index 6bd1089b07e0..cd17dd11ebe7 100644 +--- a/arch/arm/lib/uaccess_with_memcpy.c ++++ b/arch/arm/lib/uaccess_with_memcpy.c +@@ -22,6 +22,14 @@ + #include + #include + ++#ifndef COPY_FROM_USER_THRESHOLD ++#define COPY_FROM_USER_THRESHOLD 64 ++#endif ++ ++#ifndef COPY_TO_USER_THRESHOLD ++#define COPY_TO_USER_THRESHOLD 64 ++#endif ++ + static int + pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) + { +@@ -84,7 +92,44 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) + return 1; + } + +-static unsigned long noinline ++static int ++pin_page_for_read(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) ++{ ++ unsigned long addr = (unsigned long)_addr; ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ pud_t *pud; ++ spinlock_t *ptl; ++ ++ pgd = pgd_offset(current->mm, addr); ++ if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) ++ { ++ return 0; ++ } ++ pud = pud_offset(pgd, addr); ++ if (unlikely(pud_none(*pud) || pud_bad(*pud))) ++ { ++ return 0; ++ } ++ ++ pmd = pmd_offset(pud, addr); ++ if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) ++ return 0; ++ ++ pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); ++ if (unlikely(!pte_present(*pte) || !pte_young(*pte))) { ++ pte_unmap_unlock(pte, ptl); ++ return 0; ++ } ++ ++ *ptep = pte; ++ *ptlp = ptl; ++ ++ return 1; ++} ++ ++unsigned long noinline + __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) + { + unsigned long ua_flags; +@@ -137,6 +182,57 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) + return n; + } + ++unsigned long noinline ++__copy_from_user_memcpy(void *to, const void __user *from, unsigned long n) ++{ ++ unsigned long ua_flags; ++ int atomic; ++ ++ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { ++ memcpy(to, (const void *)from, n); ++ return 0; ++ } ++ ++ /* the mmap semaphore is taken only if not in an atomic context */ ++ atomic = in_atomic(); ++ ++ if (!atomic) ++ down_read(¤t->mm->mmap_sem); ++ while (n) { ++ pte_t *pte; ++ spinlock_t *ptl; ++ int tocopy; ++ ++ while (!pin_page_for_read(from, &pte, &ptl)) { ++ char temp; ++ if (!atomic) ++ up_read(¤t->mm->mmap_sem); ++ if (__get_user(temp, (char __user *)from)) ++ goto out; ++ if (!atomic) ++ down_read(¤t->mm->mmap_sem); ++ } ++ ++ tocopy = (~(unsigned long)from & ~PAGE_MASK) + 1; ++ if (tocopy > n) ++ tocopy = n; ++ ++ ua_flags = uaccess_save_and_enable(); ++ memcpy(to, (const void *)from, tocopy); ++ uaccess_restore(ua_flags); ++ to += tocopy; ++ from += tocopy; ++ n -= tocopy; ++ ++ pte_unmap_unlock(pte, ptl); ++ } ++ if (!atomic) ++ up_read(¤t->mm->mmap_sem); ++ ++out: ++ return n; ++} ++ + unsigned long + arm_copy_to_user(void __user *to, const void *from, unsigned long n) + { +@@ -147,7 +243,7 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n) + * With frame pointer disabled, tail call optimization kicks in + * as well making this test almost invisible. + */ +- if (n < 64) { ++ if (n < COPY_TO_USER_THRESHOLD) { + unsigned long ua_flags = uaccess_save_and_enable(); + n = __copy_to_user_std(to, from, n); + uaccess_restore(ua_flags); +@@ -156,6 +252,26 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n) + } + return n; + } ++ ++unsigned long __must_check ++arm_copy_from_user(void *to, const void __user *from, unsigned long n) ++{ ++ /* ++ * This test is stubbed out of the main function above to keep ++ * the overhead for small copies low by avoiding a large ++ * register dump on the stack just to reload them right away. ++ * With frame pointer disabled, tail call optimization kicks in ++ * as well making this test almost invisible. ++ */ ++ if (n < COPY_TO_USER_THRESHOLD) { ++ unsigned long ua_flags = uaccess_save_and_enable(); ++ n = __copy_from_user_std(to, from, n); ++ uaccess_restore(ua_flags); ++ } else { ++ n = __copy_from_user_memcpy(to, from, n); ++ } ++ return n; ++} + + static unsigned long noinline + __clear_user_memset(void __user *addr, unsigned long n) +diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig +index 333dc3c2e5ff..46b787a6474f 100644 +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -174,6 +174,13 @@ config ARCH_BCM_53573 + The base chip is BCM53573 and there are some packaging modifications + like BCM47189 and BCM47452. + ++config BCM2835_FAST_MEMCPY ++ bool "Enable optimized __copy_to_user and __copy_from_user" ++ depends on ARCH_BCM2835 && ARCH_MULTI_V6 ++ default y ++ help ++ Optimized versions of __copy_to_user and __copy_from_user for Pi1. ++ + config ARCH_BCM_63XX + bool "Broadcom BCM63xx DSL SoC" + depends on ARCH_MULTI_V7 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1063_dbec05566e6b77ac476e47eaf81e43bcb9933388.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1063_dbec05566e6b77ac476e47eaf81e43bcb9933388.patch --- linux-4.9.13/debian/patches/rpi/rpi_1063_dbec05566e6b77ac476e47eaf81e43bcb9933388.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1063_dbec05566e6b77ac476e47eaf81e43bcb9933388.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,35 @@ +commit dbec05566e6b77ac476e47eaf81e43bcb9933388 +Author: Phil Elwell +Date: Thu Jun 25 12:16:11 2015 +0100 + + gpio-poweroff: Allow it to work on Raspberry Pi + + The Raspberry Pi firmware manages the power-down and reboot + process. To do this it installs a pm_power_off handler, causing + the gpio-poweroff module to abort the probe function. + + This patch introduces a "force" DT property that overrides that + behaviour, and also adds a DT overlay to enable and control it. + + Note that running in an active-low configuration (DT parameter + "active_low") requires a custom dt-blob.bin and probably won't + allow a reboot without switching off, so an external inversion + of the trigger signal may be preferable. + +diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c +index be3d81ff51cc..a030ae9fb1fc 100644 +--- a/drivers/power/reset/gpio-poweroff.c ++++ b/drivers/power/reset/gpio-poweroff.c +@@ -49,9 +49,11 @@ static int gpio_poweroff_probe(struct platform_device *pdev) + { + bool input = false; + enum gpiod_flags flags; ++ bool force = false; + + /* If a pm_power_off function has already been added, leave it alone */ +- if (pm_power_off != NULL) { ++ force = of_property_read_bool(pdev->dev.of_node, "force"); ++ if (!force && (pm_power_off != NULL)) { + dev_err(&pdev->dev, + "%s: pm_power_off function already registered", + __func__); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1064_e0e588e7fa45289e2af2a8a726a023e91dfc74f9.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1064_e0e588e7fa45289e2af2a8a726a023e91dfc74f9.patch --- linux-4.9.13/debian/patches/rpi/rpi_1064_e0e588e7fa45289e2af2a8a726a023e91dfc74f9.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1064_e0e588e7fa45289e2af2a8a726a023e91dfc74f9.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,847 @@ +commit e0e588e7fa45289e2af2a8a726a023e91dfc74f9 +Author: Phil Elwell +Date: Tue Jul 14 14:32:47 2015 +0100 + + mfd: Add Raspberry Pi Sense HAT core driver + +diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig +index 4215b5382092..4364d7c85543 100644 +--- a/drivers/input/joystick/Kconfig ++++ b/drivers/input/joystick/Kconfig +@@ -330,4 +330,12 @@ config JOYSTICK_MAPLE + To compile this as a module choose M here: the module will be called + maplecontrol. + ++config JOYSTICK_RPISENSE ++ tristate "Raspberry Pi Sense HAT joystick" ++ depends on GPIOLIB && INPUT ++ select MFD_RPISENSE_CORE ++ ++ help ++ This is the joystick driver for the Raspberry Pi Sense HAT ++ + endif +diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile +index 92dc0de9dfed..175816037493 100644 +--- a/drivers/input/joystick/Makefile ++++ b/drivers/input/joystick/Makefile +@@ -32,4 +32,5 @@ obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o + obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o + obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o + obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o ++obj-$(CONFIG_JOYSTICK_RPISENSE) += rpisense-js.o + +diff --git a/drivers/input/joystick/rpisense-js.c b/drivers/input/joystick/rpisense-js.c +new file mode 100644 +index 000000000000..6a416769065d +--- /dev/null ++++ b/drivers/input/joystick/rpisense-js.c +@@ -0,0 +1,153 @@ ++/* ++ * Raspberry Pi Sense HAT joystick driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++ ++#include ++#include ++ ++static struct rpisense *rpisense; ++static unsigned char keymap[5] = {KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,}; ++ ++static void keys_work_fn(struct work_struct *work) ++{ ++ int i; ++ static s32 prev_keys; ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ s32 keys = rpisense_reg_read(rpisense, RPISENSE_KEYS); ++ s32 changes = keys ^ prev_keys; ++ ++ prev_keys = keys; ++ for (i = 0; i < 5; i++) { ++ if (changes & 1) { ++ input_report_key(rpisense_js->keys_dev, ++ keymap[i], keys & 1); ++ } ++ changes >>= 1; ++ keys >>= 1; ++ } ++ input_sync(rpisense_js->keys_dev); ++} ++ ++static irqreturn_t keys_irq_handler(int irq, void *pdev) ++{ ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ ++ schedule_work(&rpisense_js->keys_work_s); ++ return IRQ_HANDLED; ++} ++ ++static int rpisense_js_probe(struct platform_device *pdev) ++{ ++ int ret; ++ int i; ++ struct rpisense_js *rpisense_js; ++ ++ rpisense = rpisense_get_dev(); ++ rpisense_js = &rpisense->joystick; ++ ++ INIT_WORK(&rpisense_js->keys_work_s, keys_work_fn); ++ ++ rpisense_js->keys_dev = input_allocate_device(); ++ if (!rpisense_js->keys_dev) { ++ dev_err(&pdev->dev, "Could not allocate input device.\n"); ++ return -ENOMEM; ++ } ++ ++ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY); ++ for (i = 0; i < ARRAY_SIZE(keymap); i++) { ++ set_bit(keymap[i], ++ rpisense_js->keys_dev->keybit); ++ } ++ ++ rpisense_js->keys_dev->name = "Raspberry Pi Sense HAT Joystick"; ++ rpisense_js->keys_dev->phys = "rpi-sense-joy/input0"; ++ rpisense_js->keys_dev->id.bustype = BUS_I2C; ++ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); ++ rpisense_js->keys_dev->keycode = keymap; ++ rpisense_js->keys_dev->keycodesize = sizeof(unsigned char); ++ rpisense_js->keys_dev->keycodemax = ARRAY_SIZE(keymap); ++ ++ ret = input_register_device(rpisense_js->keys_dev); ++ if (ret) { ++ dev_err(&pdev->dev, "Could not register input device.\n"); ++ goto err_keys_alloc; ++ } ++ ++ ret = gpiod_direction_input(rpisense_js->keys_desc); ++ if (ret) { ++ dev_err(&pdev->dev, "Could not set keys-int direction.\n"); ++ goto err_keys_reg; ++ } ++ ++ rpisense_js->keys_irq = gpiod_to_irq(rpisense_js->keys_desc); ++ if (rpisense_js->keys_irq < 0) { ++ dev_err(&pdev->dev, "Could not determine keys-int IRQ.\n"); ++ ret = rpisense_js->keys_irq; ++ goto err_keys_reg; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, rpisense_js->keys_irq, ++ keys_irq_handler, IRQF_TRIGGER_RISING, ++ "keys", &pdev->dev); ++ if (ret) { ++ dev_err(&pdev->dev, "IRQ request failed.\n"); ++ goto err_keys_reg; ++ } ++ return 0; ++err_keys_reg: ++ input_unregister_device(rpisense_js->keys_dev); ++err_keys_alloc: ++ input_free_device(rpisense_js->keys_dev); ++ return ret; ++} ++ ++static int rpisense_js_remove(struct platform_device *pdev) ++{ ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ ++ input_unregister_device(rpisense_js->keys_dev); ++ input_free_device(rpisense_js->keys_dev); ++ return 0; ++} ++ ++#ifdef CONFIG_OF ++static const struct of_device_id rpisense_js_id[] = { ++ { .compatible = "rpi,rpi-sense-js" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rpisense_js_id); ++#endif ++ ++static struct platform_device_id rpisense_js_device_id[] = { ++ { .name = "rpi-sense-js" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(platform, rpisense_js_device_id); ++ ++static struct platform_driver rpisense_js_driver = { ++ .probe = rpisense_js_probe, ++ .remove = rpisense_js_remove, ++ .driver = { ++ .name = "rpi-sense-js", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(rpisense_js_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index c6df6442ba2b..b220064bd5fe 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -10,6 +10,14 @@ config MFD_CORE + select IRQ_DOMAIN + default n + ++config MFD_RPISENSE_CORE ++ tristate "Raspberry Pi Sense HAT core functions" ++ depends on I2C ++ select MFD_CORE ++ help ++ This is the core driver for the Raspberry Pi Sense HAT. This provides ++ the necessary functions to communicate with the hardware. ++ + config MFD_CS5535 + tristate "AMD CS5535 and CS5536 southbridge core functions" + select MFD_CORE +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 9834e669d985..1d8d58fe173c 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -211,3 +211,4 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o + obj-$(CONFIG_MFD_MT6397) += mt6397-core.o + + obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o ++obj-$(CONFIG_MFD_RPISENSE_CORE) += rpisense-core.o +diff --git a/drivers/mfd/rpisense-core.c b/drivers/mfd/rpisense-core.c +new file mode 100644 +index 000000000000..eea9312dc96a +--- /dev/null ++++ b/drivers/mfd/rpisense-core.c +@@ -0,0 +1,157 @@ ++/* ++ * Raspberry Pi Sense HAT core driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This driver is based on wm8350 implementation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct rpisense *rpisense; ++ ++static void rpisense_client_dev_register(struct rpisense *rpisense, ++ const char *name, ++ struct platform_device **pdev) ++{ ++ int ret; ++ ++ *pdev = platform_device_alloc(name, -1); ++ if (*pdev == NULL) { ++ dev_err(rpisense->dev, "Failed to allocate %s\n", name); ++ return; ++ } ++ ++ (*pdev)->dev.parent = rpisense->dev; ++ platform_set_drvdata(*pdev, rpisense); ++ ret = platform_device_add(*pdev); ++ if (ret != 0) { ++ dev_err(rpisense->dev, "Failed to register %s: %d\n", ++ name, ret); ++ platform_device_put(*pdev); ++ *pdev = NULL; ++ } ++} ++ ++static int rpisense_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ int ret; ++ struct rpisense_js *rpisense_js; ++ ++ rpisense = devm_kzalloc(&i2c->dev, sizeof(struct rpisense), GFP_KERNEL); ++ if (rpisense == NULL) ++ return -ENOMEM; ++ ++ i2c_set_clientdata(i2c, rpisense); ++ rpisense->dev = &i2c->dev; ++ rpisense->i2c_client = i2c; ++ ++ ret = rpisense_reg_read(rpisense, RPISENSE_WAI); ++ if (ret > 0) { ++ if (ret != 's') ++ return -EINVAL; ++ } else { ++ return ret; ++ } ++ ret = rpisense_reg_read(rpisense, RPISENSE_VER); ++ if (ret < 0) ++ return ret; ++ ++ dev_info(rpisense->dev, ++ "Raspberry Pi Sense HAT firmware version %i\n", ret); ++ ++ rpisense_js = &rpisense->joystick; ++ rpisense_js->keys_desc = devm_gpiod_get(&i2c->dev, ++ "keys-int", GPIOD_IN); ++ if (IS_ERR(rpisense_js->keys_desc)) { ++ dev_warn(&i2c->dev, "Failed to get keys-int descriptor.\n"); ++ rpisense_js->keys_desc = gpio_to_desc(23); ++ if (rpisense_js->keys_desc == NULL) { ++ dev_err(&i2c->dev, "GPIO23 fallback failed.\n"); ++ return PTR_ERR(rpisense_js->keys_desc); ++ } ++ } ++ rpisense_client_dev_register(rpisense, "rpi-sense-js", ++ &(rpisense->joystick.pdev)); ++ rpisense_client_dev_register(rpisense, "rpi-sense-fb", ++ &(rpisense->framebuffer.pdev)); ++ ++ return 0; ++} ++ ++static int rpisense_remove(struct i2c_client *i2c) ++{ ++ struct rpisense *rpisense = i2c_get_clientdata(i2c); ++ ++ platform_device_unregister(rpisense->joystick.pdev); ++ return 0; ++} ++ ++struct rpisense *rpisense_get_dev(void) ++{ ++ return rpisense; ++} ++EXPORT_SYMBOL_GPL(rpisense_get_dev); ++ ++s32 rpisense_reg_read(struct rpisense *rpisense, int reg) ++{ ++ int ret = i2c_smbus_read_byte_data(rpisense->i2c_client, reg); ++ ++ if (ret < 0) ++ dev_err(rpisense->dev, "Read from reg %d failed\n", reg); ++ /* Due to the BCM270x I2C clock stretching bug, some values ++ * may have MSB set. Clear it to avoid incorrect values. ++ * */ ++ return ret & 0x7F; ++} ++EXPORT_SYMBOL_GPL(rpisense_reg_read); ++ ++int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count) ++{ ++ int ret = i2c_master_send(rpisense->i2c_client, buf, count); ++ ++ if (ret < 0) ++ dev_err(rpisense->dev, "Block write failed\n"); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(rpisense_block_write); ++ ++static const struct i2c_device_id rpisense_i2c_id[] = { ++ { "rpi-sense", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id); ++ ++ ++static struct i2c_driver rpisense_driver = { ++ .driver = { ++ .name = "rpi-sense", ++ .owner = THIS_MODULE, ++ }, ++ .probe = rpisense_probe, ++ .remove = rpisense_remove, ++ .id_table = rpisense_i2c_id, ++}; ++ ++module_i2c_driver(rpisense_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT core driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); ++ +diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig +index 7a217f153dce..faf0114a29b3 100644 +--- a/drivers/video/fbdev/Kconfig ++++ b/drivers/video/fbdev/Kconfig +@@ -2409,3 +2409,16 @@ config FB_SM712 + This driver is also available as a module. The module will be + called sm712fb. If you want to compile it as a module, say M + here and read . ++ ++config FB_RPISENSE ++ tristate "Raspberry Pi Sense HAT framebuffer" ++ depends on FB ++ select MFD_RPISENSE_CORE ++ select FB_SYS_FOPS ++ select FB_SYS_FILLRECT ++ select FB_SYS_COPYAREA ++ select FB_SYS_IMAGEBLIT ++ select FB_DEFERRED_IO ++ ++ help ++ This is the framebuffer driver for the Raspberry Pi Sense HAT +diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile +index 2e403e707459..42f4fc1fd76b 100644 +--- a/drivers/video/fbdev/Makefile ++++ b/drivers/video/fbdev/Makefile +@@ -145,6 +145,7 @@ obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o + obj-$(CONFIG_FB_MXS) += mxsfb.o + obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o + obj-$(CONFIG_FB_SIMPLE) += simplefb.o ++obj-$(CONFIG_FB_RPISENSE) += rpisense-fb.o + + # the test framebuffer is last + obj-$(CONFIG_FB_VIRTUAL) += vfb.o +diff --git a/drivers/video/fbdev/rpisense-fb.c b/drivers/video/fbdev/rpisense-fb.c +new file mode 100644 +index 000000000000..26432a5a0b4b +--- /dev/null ++++ b/drivers/video/fbdev/rpisense-fb.c +@@ -0,0 +1,293 @@ ++/* ++ * Raspberry Pi Sense HAT framebuffer driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static bool lowlight; ++module_param(lowlight, bool, 0); ++MODULE_PARM_DESC(lowlight, "Reduce LED matrix brightness to one third"); ++ ++static struct rpisense *rpisense; ++ ++struct rpisense_fb_param { ++ char __iomem *vmem; ++ u8 *vmem_work; ++ u32 vmemsize; ++ u8 *gamma; ++}; ++ ++static u8 gamma_default[32] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, ++ 0x02, 0x02, 0x03, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0E, 0x0F, 0x11, ++ 0x12, 0x14, 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F,}; ++ ++static u8 gamma_low[32] = {0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, ++ 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02, ++ 0x03, 0x03, 0x03, 0x04, 0x04, 0x05, 0x05, 0x06, ++ 0x06, 0x07, 0x07, 0x08, 0x08, 0x09, 0x0A, 0x0A,}; ++ ++static u8 gamma_user[32]; ++ ++static struct rpisense_fb_param rpisense_fb_param = { ++ .vmem = NULL, ++ .vmemsize = 128, ++ .gamma = gamma_default, ++}; ++ ++static struct fb_deferred_io rpisense_fb_defio; ++ ++static struct fb_fix_screeninfo rpisense_fb_fix = { ++ .id = "RPi-Sense FB", ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_TRUECOLOR, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++ .line_length = 16, ++}; ++ ++static struct fb_var_screeninfo rpisense_fb_var = { ++ .xres = 8, ++ .yres = 8, ++ .xres_virtual = 8, ++ .yres_virtual = 8, ++ .bits_per_pixel = 16, ++ .red = {11, 5, 0}, ++ .green = {5, 6, 0}, ++ .blue = {0, 5, 0}, ++}; ++ ++static ssize_t rpisense_fb_write(struct fb_info *info, ++ const char __user *buf, size_t count, ++ loff_t *ppos) ++{ ++ ssize_t res = fb_sys_write(info, buf, count, ppos); ++ ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++ return res; ++} ++ ++static void rpisense_fb_fillrect(struct fb_info *info, ++ const struct fb_fillrect *rect) ++{ ++ sys_fillrect(info, rect); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *area) ++{ ++ sys_copyarea(info, area); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_imageblit(struct fb_info *info, ++ const struct fb_image *image) ++{ ++ sys_imageblit(info, image); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_deferred_io(struct fb_info *info, ++ struct list_head *pagelist) ++{ ++ int i; ++ int j; ++ u8 *vmem_work = rpisense_fb_param.vmem_work; ++ u16 *mem = (u16 *)rpisense_fb_param.vmem; ++ u8 *gamma = rpisense_fb_param.gamma; ++ ++ vmem_work[0] = 0; ++ for (j = 0; j < 8; j++) { ++ for (i = 0; i < 8; i++) { ++ vmem_work[(j * 24) + i + 1] = ++ gamma[(mem[(j * 8) + i] >> 11) & 0x1F]; ++ vmem_work[(j * 24) + (i + 8) + 1] = ++ gamma[(mem[(j * 8) + i] >> 6) & 0x1F]; ++ vmem_work[(j * 24) + (i + 16) + 1] = ++ gamma[(mem[(j * 8) + i]) & 0x1F]; ++ } ++ } ++ rpisense_block_write(rpisense, vmem_work, 193); ++} ++ ++static struct fb_deferred_io rpisense_fb_defio = { ++ .delay = HZ/100, ++ .deferred_io = rpisense_fb_deferred_io, ++}; ++ ++static int rpisense_fb_ioctl(struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch (cmd) { ++ case SENSEFB_FBIOGET_GAMMA: ++ if (copy_to_user((void __user *) arg, rpisense_fb_param.gamma, ++ sizeof(u8[32]))) ++ return -EFAULT; ++ return 0; ++ case SENSEFB_FBIOSET_GAMMA: ++ if (copy_from_user(gamma_user, (void __user *)arg, ++ sizeof(u8[32]))) ++ return -EFAULT; ++ rpisense_fb_param.gamma = gamma_user; ++ schedule_delayed_work(&info->deferred_work, ++ rpisense_fb_defio.delay); ++ return 0; ++ case SENSEFB_FBIORESET_GAMMA: ++ switch (arg) { ++ case 0: ++ rpisense_fb_param.gamma = gamma_default; ++ break; ++ case 1: ++ rpisense_fb_param.gamma = gamma_low; ++ break; ++ case 2: ++ rpisense_fb_param.gamma = gamma_user; ++ break; ++ default: ++ return -EINVAL; ++ } ++ schedule_delayed_work(&info->deferred_work, ++ rpisense_fb_defio.delay); ++ break; ++ default: ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++static struct fb_ops rpisense_fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_read = fb_sys_read, ++ .fb_write = rpisense_fb_write, ++ .fb_fillrect = rpisense_fb_fillrect, ++ .fb_copyarea = rpisense_fb_copyarea, ++ .fb_imageblit = rpisense_fb_imageblit, ++ .fb_ioctl = rpisense_fb_ioctl, ++}; ++ ++static int rpisense_fb_probe(struct platform_device *pdev) ++{ ++ struct fb_info *info; ++ int ret = -ENOMEM; ++ struct rpisense_fb *rpisense_fb; ++ ++ rpisense = rpisense_get_dev(); ++ rpisense_fb = &rpisense->framebuffer; ++ ++ rpisense_fb_param.vmem = vzalloc(rpisense_fb_param.vmemsize); ++ if (!rpisense_fb_param.vmem) ++ return ret; ++ ++ rpisense_fb_param.vmem_work = devm_kmalloc(&pdev->dev, 193, GFP_KERNEL); ++ if (!rpisense_fb_param.vmem_work) ++ goto err_malloc; ++ ++ info = framebuffer_alloc(0, &pdev->dev); ++ if (!info) { ++ dev_err(&pdev->dev, "Could not allocate framebuffer.\n"); ++ goto err_malloc; ++ } ++ rpisense_fb->info = info; ++ ++ rpisense_fb_fix.smem_start = (unsigned long)rpisense_fb_param.vmem; ++ rpisense_fb_fix.smem_len = rpisense_fb_param.vmemsize; ++ ++ info->fbops = &rpisense_fb_ops; ++ info->fix = rpisense_fb_fix; ++ info->var = rpisense_fb_var; ++ info->fbdefio = &rpisense_fb_defio; ++ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; ++ info->screen_base = rpisense_fb_param.vmem; ++ info->screen_size = rpisense_fb_param.vmemsize; ++ ++ if (lowlight) ++ rpisense_fb_param.gamma = gamma_low; ++ ++ fb_deferred_io_init(info); ++ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Could not register framebuffer.\n"); ++ goto err_fballoc; ++ } ++ ++ fb_info(info, "%s frame buffer device\n", info->fix.id); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++ return 0; ++err_fballoc: ++ framebuffer_release(info); ++err_malloc: ++ vfree(rpisense_fb_param.vmem); ++ return ret; ++} ++ ++static int rpisense_fb_remove(struct platform_device *pdev) ++{ ++ struct rpisense_fb *rpisense_fb = &rpisense->framebuffer; ++ struct fb_info *info = rpisense_fb->info; ++ ++ if (info) { ++ unregister_framebuffer(info); ++ fb_deferred_io_cleanup(info); ++ framebuffer_release(info); ++ vfree(rpisense_fb_param.vmem); ++ } ++ ++ return 0; ++} ++ ++#ifdef CONFIG_OF ++static const struct of_device_id rpisense_fb_id[] = { ++ { .compatible = "rpi,rpi-sense-fb" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rpisense_fb_id); ++#endif ++ ++static struct platform_device_id rpisense_fb_device_id[] = { ++ { .name = "rpi-sense-fb" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(platform, rpisense_fb_device_id); ++ ++static struct platform_driver rpisense_fb_driver = { ++ .probe = rpisense_fb_probe, ++ .remove = rpisense_fb_remove, ++ .driver = { ++ .name = "rpi-sense-fb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(rpisense_fb_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT framebuffer driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); ++ +diff --git a/include/linux/mfd/rpisense/core.h b/include/linux/mfd/rpisense/core.h +new file mode 100644 +index 000000000000..4856aa3c8b06 +--- /dev/null ++++ b/include/linux/mfd/rpisense/core.h +@@ -0,0 +1,47 @@ ++/* ++ * Raspberry Pi Sense HAT core driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_MFD_RPISENSE_CORE_H_ ++#define __LINUX_MFD_RPISENSE_CORE_H_ ++ ++#include ++#include ++ ++/* ++ * Register values. ++ */ ++#define RPISENSE_FB 0x00 ++#define RPISENSE_WAI 0xF0 ++#define RPISENSE_VER 0xF1 ++#define RPISENSE_KEYS 0xF2 ++#define RPISENSE_EE_WP 0xF3 ++ ++#define RPISENSE_ID 's' ++ ++struct rpisense { ++ struct device *dev; ++ struct i2c_client *i2c_client; ++ ++ /* Client devices */ ++ struct rpisense_js joystick; ++ struct rpisense_fb framebuffer; ++}; ++ ++struct rpisense *rpisense_get_dev(void); ++s32 rpisense_reg_read(struct rpisense *rpisense, int reg); ++int rpisense_reg_write(struct rpisense *rpisense, int reg, u16 val); ++int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count); ++ ++#endif +diff --git a/include/linux/mfd/rpisense/framebuffer.h b/include/linux/mfd/rpisense/framebuffer.h +new file mode 100644 +index 000000000000..2ba95d7eebaf +--- /dev/null ++++ b/include/linux/mfd/rpisense/framebuffer.h +@@ -0,0 +1,32 @@ ++/* ++ * Raspberry Pi Sense HAT framebuffer driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_RPISENSE_FB_H_ ++#define __LINUX_RPISENSE_FB_H_ ++ ++#define SENSEFB_FBIO_IOC_MAGIC 0xF1 ++ ++#define SENSEFB_FBIOGET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 0) ++#define SENSEFB_FBIOSET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 1) ++#define SENSEFB_FBIORESET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 2) ++ ++struct rpisense; ++ ++struct rpisense_fb { ++ struct platform_device *pdev; ++ struct fb_info *info; ++}; ++ ++#endif +diff --git a/include/linux/mfd/rpisense/joystick.h b/include/linux/mfd/rpisense/joystick.h +new file mode 100644 +index 000000000000..56196dc2af10 +--- /dev/null ++++ b/include/linux/mfd/rpisense/joystick.h +@@ -0,0 +1,35 @@ ++/* ++ * Raspberry Pi Sense HAT joystick driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_RPISENSE_JOYSTICK_H_ ++#define __LINUX_RPISENSE_JOYSTICK_H_ ++ ++#include ++#include ++#include ++#include ++ ++struct rpisense; ++ ++struct rpisense_js { ++ struct platform_device *pdev; ++ struct input_dev *keys_dev; ++ struct gpio_desc *keys_desc; ++ struct work_struct keys_work_s; ++ int keys_irq; ++}; ++ ++ ++#endif diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1065_e0f497f6f22aed316a501dc509b67e3184dfa605.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1065_e0f497f6f22aed316a501dc509b67e3184dfa605.patch --- linux-4.9.13/debian/patches/rpi/rpi_1065_e0f497f6f22aed316a501dc509b67e3184dfa605.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1065_e0f497f6f22aed316a501dc509b67e3184dfa605.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,172 @@ +commit e0f497f6f22aed316a501dc509b67e3184dfa605 +Author: Florian Meier +Date: Fri Nov 22 19:19:08 2013 +0100 + + ASoC: Add support for HifiBerry DAC + + This adds a machine driver for the HifiBerry DAC. + It is a sound card that can + be stacked onto the Raspberry Pi. + + Signed-off-by: Florian Meier + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index d528aaceaad9..ad4817f44072 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -15,4 +15,11 @@ config SND_SOC_CYGNUS + Say Y if you want to add support for ASoC audio on Broadcom + Cygnus chips (bcm958300, bcm958305, bcm911360) + +- If you don't know what to do here, say N. +\ No newline at end of file ++ If you don't know what to do here, say N. ++ ++config SND_BCM2708_SOC_HIFIBERRY_DAC ++ tristate "Support for HifiBerry DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5102A ++ help ++ Say Y or M if you want to add support for HifiBerry DAC. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index fc739d007884..be80079de3ce 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -8,3 +8,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + ++# BCM2708 Machine Support ++snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++ ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o +diff --git a/sound/soc/bcm/hifiberry_dac.c b/sound/soc/bcm/hifiberry_dac.c +new file mode 100644 +index 000000000000..45f2b770ad9e +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dac.c +@@ -0,0 +1,124 @@ ++/* ++ * ASoC Driver for HifiBerry DAC ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_hifiberry_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dac_ops = { ++ .hw_params = snd_rpi_hifiberry_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dac_dai[] = { ++{ ++ .name = "HifiBerry DAC", ++ .stream_name = "HifiBerry DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm5102a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm5102a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dac_ops, ++ .init = snd_rpi_hifiberry_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dac = { ++ .name = "snd_rpi_hifiberry_dac", ++ .driver_name = "HifiberryDac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dac_dai), ++}; ++ ++static int snd_rpi_hifiberry_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_dac); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dac_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dac_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dac_driver = { ++ .driver = { ++ .name = "snd-hifiberry-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dac_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dac_probe, ++ .remove = snd_rpi_hifiberry_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for HifiBerry DAC"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1066_f2c51b6188f069302c10ba12ae88e4adb92248cb.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1066_f2c51b6188f069302c10ba12ae88e4adb92248cb.patch --- linux-4.9.13/debian/patches/rpi/rpi_1066_f2c51b6188f069302c10ba12ae88e4adb92248cb.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1066_f2c51b6188f069302c10ba12ae88e4adb92248cb.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,276 @@ +commit f2c51b6188f069302c10ba12ae88e4adb92248cb +Author: Florian Meier +Date: Mon Jan 25 15:48:59 2016 +0000 + + ASoC: Add support for Rpi-DAC + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index ad4817f44072..8209fffdc0be 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -23,3 +23,10 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + select SND_SOC_PCM5102A + help + Say Y or M if you want to add support for HifiBerry DAC. ++ ++config SND_BCM2708_SOC_RPI_DAC ++ tristate "Support for RPi-DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM1794A ++ help ++ Say Y or M if you want to add support for RPi-DAC. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index be80079de3ce..09501910f815 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,5 +10,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-rpi-dac-objs := rpi-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o +diff --git a/sound/soc/bcm/rpi-dac.c b/sound/soc/bcm/rpi-dac.c +new file mode 100644 +index 000000000000..59dc89ecabc0 +--- /dev/null ++++ b/sound/soc/bcm/rpi-dac.c +@@ -0,0 +1,119 @@ ++/* ++ * ASoC Driver for RPi-DAC. ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_rpi_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return 0; ++} ++ ++static int snd_rpi_rpi_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_rpi_dac_ops = { ++ .hw_params = snd_rpi_rpi_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_rpi_dac_dai[] = { ++{ ++ .name = "RPi-DAC", ++ .stream_name = "RPi-DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm1794a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm1794a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_rpi_dac_ops, ++ .init = snd_rpi_rpi_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_rpi_dac = { ++ .name = "snd_rpi_rpi_dac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_rpi_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_rpi_dac_dai), ++}; ++ ++static int snd_rpi_rpi_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_rpi_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_rpi_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_rpi_dac); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_rpi_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_rpi_dac); ++} ++ ++static const struct of_device_id snd_rpi_rpi_dac_of_match[] = { ++ { .compatible = "rpi,rpi-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_rpi_dac_of_match); ++ ++static struct platform_driver snd_rpi_rpi_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_rpi_dac_of_match, ++ }, ++ .probe = snd_rpi_rpi_dac_probe, ++ .remove = snd_rpi_rpi_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_rpi_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for RPi-DAC"); ++MODULE_LICENSE("GPL v2"); +diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig +index c67667bb970f..74a93e52bdc8 100644 +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -98,6 +98,7 @@ config SND_SOC_ALL_CODECS + select SND_SOC_PCM1681 if I2C + select SND_SOC_PCM179X_I2C if I2C + select SND_SOC_PCM179X_SPI if SPI_MASTER ++ select SND_SOC_PCM1794A if I2C + select SND_SOC_PCM3008 + select SND_SOC_PCM3168A_I2C if I2C + select SND_SOC_PCM3168A_SPI if SPI_MASTER +@@ -689,6 +690,10 @@ config SND_SOC_RT5616 + tristate "Realtek RT5616 CODEC" + depends on I2C + ++config SND_SOC_PCM1794A ++ tristate ++ depends on I2C ++ + config SND_SOC_RT5631 + tristate "Realtek ALC5631/RT5631 CODEC" + depends on I2C +diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile +index 958cd4912fbc..77786e7f44a7 100644 +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -93,6 +93,7 @@ snd-soc-pcm1681-objs := pcm1681.o + snd-soc-pcm179x-codec-objs := pcm179x.o + snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o + snd-soc-pcm179x-spi-objs := pcm179x-spi.o ++snd-soc-pcm1794a-objs := pcm1794a.o + snd-soc-pcm3008-objs := pcm3008.o + snd-soc-pcm3168a-objs := pcm3168a.o + snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o +@@ -325,6 +326,7 @@ obj-$(CONFIG_SND_SOC_PCM5102A) += snd-soc-pcm5102a.o + obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o + obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o + obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o ++obj-$(CONFIG_SND_SOC_PCM1794A) += snd-soc-pcm1794a.o + obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o + obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o + obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o +diff --git a/sound/soc/codecs/pcm1794a.c b/sound/soc/codecs/pcm1794a.c +new file mode 100644 +index 000000000000..afe1b419582a +--- /dev/null ++++ b/sound/soc/codecs/pcm1794a.c +@@ -0,0 +1,69 @@ ++/* ++ * Driver for the PCM1794A codec ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++ ++#include ++#include ++#include ++ ++#include ++ ++static struct snd_soc_dai_driver pcm1794a_dai = { ++ .name = "pcm1794a-hifi", ++ .playback = { ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_192000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE ++ }, ++}; ++ ++static struct snd_soc_codec_driver soc_codec_dev_pcm1794a; ++ ++static int pcm1794a_probe(struct platform_device *pdev) ++{ ++ return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pcm1794a, ++ &pcm1794a_dai, 1); ++} ++ ++static int pcm1794a_remove(struct platform_device *pdev) ++{ ++ snd_soc_unregister_codec(&pdev->dev); ++ return 0; ++} ++ ++static const struct of_device_id pcm1794a_of_match[] = { ++ { .compatible = "ti,pcm1794a", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, pcm1794a_of_match); ++ ++static struct platform_driver pcm1794a_codec_driver = { ++ .probe = pcm1794a_probe, ++ .remove = pcm1794a_remove, ++ .driver = { ++ .name = "pcm1794a-codec", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(pcm1794a_of_match), ++ }, ++}; ++ ++module_platform_driver(pcm1794a_codec_driver); ++ ++MODULE_DESCRIPTION("ASoC PCM1794A codec driver"); ++MODULE_AUTHOR("Florian Meier "); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1067_d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1067_d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1067_d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1067_d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,40 @@ +commit d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5 +Author: Daniel Matuschek +Date: Wed Jan 15 21:41:23 2014 +0100 + + ASoC: wm8804: Implement MCLK configuration options, add 32bit support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. + + This also added support for 32bit data. + + Signed-off-by: Daniel Matuschek + +diff --git a/sound/soc/codecs/wm8804.c b/sound/soc/codecs/wm8804.c +index af95d648265b..513f56ba1329 100644 +--- a/sound/soc/codecs/wm8804.c ++++ b/sound/soc/codecs/wm8804.c +@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_pcm_substream *substream, + blen = 0x1; + break; + case 24: ++ case 32: + blen = 0x2; + break; + default: +@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm8804_dai_ops = { + }; + + #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ +- SNDRV_PCM_FMTBIT_S24_LE) ++ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + + #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ +@@ -543,7 +544,7 @@ static struct snd_soc_dai_driver wm8804_dai = { + }; + + static const struct snd_soc_codec_driver soc_codec_dev_wm8804 = { +- .idle_bias_off = true, ++ .idle_bias_off = false, + + .component_driver = { + .dapm_widgets = wm8804_dapm_widgets, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1068_9b399f1e66f00c1a3791a299bd62b3c23a940d77.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1068_9b399f1e66f00c1a3791a299bd62b3c23a940d77.patch --- linux-4.9.13/debian/patches/rpi/rpi_1068_9b399f1e66f00c1a3791a299bd62b3c23a940d77.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1068_9b399f1e66f00c1a3791a299bd62b3c23a940d77.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,340 @@ +commit 9b399f1e66f00c1a3791a299bd62b3c23a940d77 +Author: Daniel Matuschek +Date: Wed Jan 15 21:42:08 2014 +0100 + + ASoC: BCM:Add support for HiFiBerry Digi. Driver is based on the patched WM8804 driver. + + Signed-off-by: Daniel Matuschek + + Add a parameter to turn off SPDIF output if no audio is playing + + This patch adds the paramater auto_shutdown_output to the kernel module. + Default behaviour of the module is the same, but when auto_shutdown_output + is set to 1, the SPDIF oputput will shutdown if no stream is playing. + + bugfix for 32kHz sample rate, was missing + + HiFiBerry Digi: set SPDIF status bits for sample rate + + The HiFiBerry Digi driver did not signal the sample rate in the SPDIF status bits. + While this is optional, some DACs and receivers do not accept this signal. This patch + adds the sample rate bits in the SPDIF status block. + + Added HiFiBerry Digi+ Pro driver + + Signed-off-by: Daniel Matuschek + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 8209fffdc0be..3cd4288a1e1c 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + help + Say Y or M if you want to add support for HifiBerry DAC. + ++config SND_BCM2708_SOC_HIFIBERRY_DIGI ++ tristate "Support for HifiBerry Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 09501910f815..862f00fb43bf 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,7 +10,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o +diff --git a/sound/soc/bcm/hifiberry_digi.c b/sound/soc/bcm/hifiberry_digi.c +new file mode 100644 +index 000000000000..19dc953b7227 +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_digi.c +@@ -0,0 +1,276 @@ ++/* ++ * ASoC Driver for HifiBerry Digi ++ * ++ * Author: Daniel Matuschek ++ * based on the HifiBerry DAC driver by Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static short int auto_shutdown_output = 0; ++module_param(auto_shutdown_output, short, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); ++ ++#define CLK_44EN_RATE 22579200UL ++#define CLK_48EN_RATE 24576000UL ++ ++static bool snd_rpi_hifiberry_is_digipro; ++static struct gpio_desc *snd_rpi_hifiberry_clk44gpio; ++static struct gpio_desc *snd_rpi_hifiberry_clk48gpio; ++ ++static int samplerate=44100; ++ ++static uint32_t snd_rpi_hifiberry_digi_enable_clock(int sample_rate) ++{ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 1); ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 0); ++ return CLK_44EN_RATE; ++ default: ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 1); ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 0); ++ return CLK_48EN_RATE; ++ } ++} ++ ++ ++static int snd_rpi_hifiberry_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Initialize Digi+ Pro hardware */ ++ if (snd_rpi_hifiberry_is_digipro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry Digi+ Pro"; ++ dai->stream_name = "HiFiBerry Digi+ Pro HiFi"; ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_digi_startup(struct snd_pcm_substream *substream) { ++ /* turn on digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_digi_shutdown(struct snd_pcm_substream *substream) { ++ /* turn off output */ ++ if (auto_shutdown_output) { ++ /* turn off output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++ } ++} ++ ++ ++static int snd_rpi_hifiberry_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq=0; ++ int mclk_div=1; ++ int sampling_freq=1; ++ ++ int ret; ++ ++ samplerate = params_rate(params); ++ ++ if (samplerate<=96000) { ++ mclk_freq=samplerate*256; ++ mclk_div=WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq=samplerate*128; ++ mclk_div=WM8804_MCLKDIV_128FS; ++ } ++ ++ if (snd_rpi_hifiberry_is_digipro) ++ sysclk = snd_rpi_hifiberry_digi_enable_clock(samplerate); ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq=0x03; ++ break; ++ case 44100: ++ sampling_freq=0x00; ++ break; ++ case 48000: ++ sampling_freq=0x02; ++ break; ++ case 88200: ++ sampling_freq=0x08; ++ break; ++ case 96000: ++ sampling_freq=0x0a; ++ break; ++ case 176400: ++ sampling_freq=0x0c; ++ break; ++ case 192000: ++ sampling_freq=0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_digi_ops = { ++ .hw_params = snd_rpi_hifiberry_digi_hw_params, ++ .startup = snd_rpi_hifiberry_digi_startup, ++ .shutdown = snd_rpi_hifiberry_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_digi_dai[] = { ++{ ++ .name = "HifiBerry Digi", ++ .stream_name = "HifiBerry Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_hifiberry_digi_ops, ++ .init = snd_rpi_hifiberry_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_digi = { ++ .name = "snd_rpi_hifiberry_digi", ++ .driver_name = "HifiberryDigi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_digi_dai), ++}; ++ ++static int snd_rpi_hifiberry_digi_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_digi.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_digi_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ snd_rpi_hifiberry_is_digipro = 1; ++ ++ snd_rpi_hifiberry_clk44gpio = ++ devm_gpiod_get(&pdev->dev, "clock44", GPIOD_OUT_LOW); ++ if (IS_ERR(snd_rpi_hifiberry_clk44gpio)) ++ snd_rpi_hifiberry_is_digipro = 0; ++ ++ snd_rpi_hifiberry_clk48gpio = ++ devm_gpiod_get(&pdev->dev, "clock48", GPIOD_OUT_LOW); ++ if (IS_ERR(snd_rpi_hifiberry_clk48gpio)) ++ snd_rpi_hifiberry_is_digipro = 0; ++ ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_digi); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_digi_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_digi_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_digi_driver = { ++ .driver = { ++ .name = "snd-hifiberry-digi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_digi_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_digi_probe, ++ .remove = snd_rpi_hifiberry_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_digi_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HifiBerry Digi"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1069_56fef008757934346c545e73464a01b5c8e651d1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1069_56fef008757934346c545e73464a01b5c8e651d1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1069_56fef008757934346c545e73464a01b5c8e651d1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1069_56fef008757934346c545e73464a01b5c8e651d1.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,327 @@ +commit 56fef008757934346c545e73464a01b5c8e651d1 +Author: Gordon Garrity +Date: Sat Mar 8 16:56:57 2014 +0000 + + Add IQaudIO Sound Card support for Raspberry Pi + + Set a limit of 0dB on Digital Volume Control + + The main volume control in the PCM512x DAC has a range up to + +24dB. This is dangerously loud and can potentially cause massive + clipping in the output stages. Therefore this sets a sensible + limit of 0dB for this control. + + Allow up to 24dB digital gain to be applied when using IQAudIO DAC+ + + 24db_digital_gain DT param can be used to specify that PCM512x + codec "Digital" volume control should not be limited to 0dB gain, + and if specified will allow the full 24dB gain. + + Modify IQAudIO DAC+ ASoC driver to set card/dai config from dt + + Add the ability to set the card name, dai name and dai stream name, from + dt config. + + Signed-off-by: DigitalDreamtime + + IQaudIO: auto-mute for AMP+ and DigiAMP+ + + IQAudIO amplifier mute via GPIO22. Add dt params for "one-shot" unmute + and auto mute. + + Revision 2, auto mute implementing HiassofT suggestion to mute/unmute + using set_bias_level, rather than startup/shutdown.... + "By default DAPM waits 5 seconds (pmdown_time) before shutting down + playback streams so a close/stop immediately followed by open/start + doesn't trigger an amp mute+unmute." + + Tested on both AMP+ (via DAC+) and DigiAMP+, with both options... + + dtoverlay=iqaudio-dacplus,unmute_amp + "one-shot" unmute when kernel module loads. + + dtoverlay=iqaudio-dacplus,auto_mute_amp + Unmute amp when ALSA device opened by a client. Mute, with 5 second delay + when ALSA device closed. (Re-opening the device within the 5 second close + window, will cancel mute.) + + Revision 4, using gpiod. + + Revision 5, clean-up formatting before adding mute code. + - Convert tab plus 4 space formatting to 2x tab + - Remove '// NOT USED' commented code + + Revision 6, don't attempt to "one-shot" unmute amp, unless card is + successfully registered. + + Signed-off-by: DigitalDreamtime + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 3cd4288a1e1c..8272ba5302b1 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -37,3 +37,10 @@ config SND_BCM2708_SOC_RPI_DAC + select SND_SOC_PCM1794A + help + Say Y or M if you want to add support for RPi-DAC. ++ ++config SND_BCM2708_SOC_IQAUDIO_DAC ++ tristate "Support for IQaudIO-DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ help ++ Say Y or M if you want to add support for IQaudIO-DAC. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 862f00fb43bf..fcac518ca9b4 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -12,7 +12,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o ++snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +diff --git a/sound/soc/bcm/iqaudio-dac.c b/sound/soc/bcm/iqaudio-dac.c +new file mode 100644 +index 000000000000..4e8e6dec14bc +--- /dev/null ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -0,0 +1,234 @@ ++/* ++ * ASoC Driver for IQaudIO DAC ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static struct gpio_desc *mute_gpio; ++ ++static int snd_rpi_iqaudio_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++static void snd_rpi_iqaudio_gpio_mute(struct snd_soc_card *card) ++{ ++ if (mute_gpio) { ++ dev_info(card->dev, "%s: muting amp using GPIO22\n", ++ __func__); ++ gpiod_set_value_cansleep(mute_gpio, 0); ++ } ++} ++ ++static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card) ++{ ++ if (mute_gpio) { ++ dev_info(card->dev, "%s: un-muting amp using GPIO22\n", ++ __func__); ++ gpiod_set_value_cansleep(mute_gpio, 1); ++ } ++} ++ ++static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) ++{ ++ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; ++ ++ if (dapm->dev != codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_PREPARE: ++ if (dapm->bias_level != SND_SOC_BIAS_STANDBY) ++ break; ++ ++ /* UNMUTE AMP */ ++ snd_rpi_iqaudio_gpio_unmute(card); ++ ++ break; ++ case SND_SOC_BIAS_STANDBY: ++ if (dapm->bias_level != SND_SOC_BIAS_PREPARE) ++ break; ++ ++ /* MUTE AMP */ ++ snd_rpi_iqaudio_gpio_mute(card); ++ ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_iqaudio_dac_ops = { ++ .hw_params = snd_rpi_iqaudio_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_iqaudio_dac_dai[] = { ++{ ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_iqaudio_dac_ops, ++ .init = snd_rpi_iqaudio_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_iqaudio_dac = { ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_iqaudio_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_dac_dai), ++}; ++ ++static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ bool gpio_unmute = false; ++ ++ snd_rpi_iqaudio_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_card *card = &snd_rpi_iqaudio_dac; ++ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_dac_dai[0]; ++ bool auto_gpio_mute = false; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "iqaudio,24db_digital_gain"); ++ ++ if (of_property_read_string(pdev->dev.of_node, "card_name", ++ &card->name)) ++ card->name = "IQaudIODAC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, "dai_name", ++ &dai->name)) ++ dai->name = "IQaudIO DAC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, ++ "dai_stream_name", &dai->stream_name)) ++ dai->stream_name = "IQaudIO DAC HiFi"; ++ ++ /* gpio_unmute - one time unmute amp using GPIO */ ++ gpio_unmute = of_property_read_bool(pdev->dev.of_node, ++ "iqaudio-dac,unmute-amp"); ++ ++ /* auto_gpio_mute - mute/unmute amp using GPIO */ ++ auto_gpio_mute = of_property_read_bool(pdev->dev.of_node, ++ "iqaudio-dac,auto-mute-amp"); ++ ++ if (auto_gpio_mute || gpio_unmute) { ++ mute_gpio = devm_gpiod_get_optional(&pdev->dev, "mute", ++ GPIOD_OUT_LOW); ++ if (IS_ERR(mute_gpio)) { ++ ret = PTR_ERR(mute_gpio); ++ dev_err(&pdev->dev, ++ "Failed to get mute gpio: %d\n", ret); ++ return ret; ++ } ++ ++ if (auto_gpio_mute && mute_gpio) ++ snd_rpi_iqaudio_dac.set_bias_level = ++ snd_rpi_iqaudio_set_bias_level; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ return ret; ++ } ++ ++ if (gpio_unmute && mute_gpio) ++ snd_rpi_iqaudio_gpio_unmute(&snd_rpi_iqaudio_dac); ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_dac_remove(struct platform_device *pdev) ++{ ++ snd_rpi_iqaudio_gpio_mute(&snd_rpi_iqaudio_dac); ++ ++ return snd_soc_unregister_card(&snd_rpi_iqaudio_dac); ++} ++ ++static const struct of_device_id iqaudio_of_match[] = { ++ { .compatible = "iqaudio,iqaudio-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, iqaudio_of_match); ++ ++static struct platform_driver snd_rpi_iqaudio_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-iqaudio-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = iqaudio_of_match, ++ }, ++ .probe = snd_rpi_iqaudio_dac_probe, ++ .remove = snd_rpi_iqaudio_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_iqaudio_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for IQAudio DAC"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1070_a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1070_a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1070_a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1070_a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,23 @@ +commit a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4 +Author: popcornmix +Date: Mon Jul 25 17:06:50 2016 +0100 + + iqaudio-dac: Compile fix - untested + +diff --git a/sound/soc/bcm/iqaudio-dac.c b/sound/soc/bcm/iqaudio-dac.c +index 4e8e6dec14bc..aa15bc4b49ca 100644 +--- a/sound/soc/bcm/iqaudio-dac.c ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -76,7 +76,11 @@ static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card) + static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) + { +- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; ++ struct snd_soc_pcm_runtime *rtd; ++ struct snd_soc_dai *codec_dai; ++ ++ rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name); ++ codec_dai = rtd->codec_dai; + + if (dapm->dev != codec_dai->dev) + return 0; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1071_c3b5ae614d58308799847d5013f027bd25642cce.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1071_c3b5ae614d58308799847d5013f027bd25642cce.patch --- linux-4.9.13/debian/patches/rpi/rpi_1071_c3b5ae614d58308799847d5013f027bd25642cce.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1071_c3b5ae614d58308799847d5013f027bd25642cce.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,623 @@ +commit c3b5ae614d58308799847d5013f027bd25642cce +Author: Daniel Matuschek +Date: Mon Aug 4 10:06:56 2014 +0200 + + Added support for HiFiBerry DAC+ + + The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses + a different codec chip (PCM5122), therefore a new driver is necessary. + + Add support for the HiFiBerry DAC+ Pro. + + The HiFiBerry DAC+ and DAC+ Pro products both use the existing bcm sound driver with the DAC+ Pro having a special clock device driver representing the two high precision oscillators. + + An addition bug fix is included for the PCM512x codec where by the physical size of the sample frame is used in the calculation of the LRCK divisor as it was found to be wrong when using 24-bit depth sample contained in a little endian 4-byte sample frame. + + Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+ + + 24db_digital_gain DT param can be used to specify that PCM512x + codec "Digital" volume control should not be limited to 0dB gain, + and if specified will allow the full 24dB gain. + + Add dt param to force HiFiBerry DAC+ Pro into slave mode + + "dtoverlay=hifiberry-dacplus,slave" + + Add 'slave' param to use HiFiBerry DAC+ Pro in slave mode, + with Pi as master for bit and frame clock. + + Signed-off-by: DigitalDreamtime + +diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile +index 925081ec14c0..2b6fcd8abf79 100644 +--- a/drivers/clk/Makefile ++++ b/drivers/clk/Makefile +@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o + obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o + obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o + obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o + obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s7x.o + obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o +diff --git a/drivers/clk/clk-hifiberry-dacpro.c b/drivers/clk/clk-hifiberry-dacpro.c +new file mode 100644 +index 000000000000..99cee2b1706c +--- /dev/null ++++ b/drivers/clk/clk-hifiberry-dacpro.c +@@ -0,0 +1,160 @@ ++/* ++ * Clock Driver for HiFiBerry DAC Pro ++ * ++ * Author: Stuart MacLean ++ * Copyright 2015 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++/** ++ * struct hifiberry_dacpro_clk - Common struct to the HiFiBerry DAC Pro ++ * @hw: clk_hw for the common clk framework ++ * @mode: 0 => CLK44EN, 1 => CLK48EN ++ */ ++struct clk_hifiberry_hw { ++ struct clk_hw hw; ++ uint8_t mode; ++}; ++ ++#define to_hifiberry_clk(_hw) container_of(_hw, struct clk_hifiberry_hw, hw) ++ ++static const struct of_device_id clk_hifiberry_dacpro_dt_ids[] = { ++ { .compatible = "hifiberry,dacpro-clk",}, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, clk_hifiberry_dacpro_dt_ids); ++ ++static unsigned long clk_hifiberry_dacpro_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ return (to_hifiberry_clk(hw)->mode == 0) ? CLK_44EN_RATE : ++ CLK_48EN_RATE; ++} ++ ++static long clk_hifiberry_dacpro_round_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long *parent_rate) ++{ ++ long actual_rate; ++ ++ if (rate <= CLK_44EN_RATE) { ++ actual_rate = (long)CLK_44EN_RATE; ++ } else if (rate >= CLK_48EN_RATE) { ++ actual_rate = (long)CLK_48EN_RATE; ++ } else { ++ long diff44Rate = (long)(rate - CLK_44EN_RATE); ++ long diff48Rate = (long)(CLK_48EN_RATE - rate); ++ ++ if (diff44Rate < diff48Rate) ++ actual_rate = (long)CLK_44EN_RATE; ++ else ++ actual_rate = (long)CLK_48EN_RATE; ++ } ++ return actual_rate; ++} ++ ++ ++static int clk_hifiberry_dacpro_set_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ unsigned long actual_rate; ++ struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw); ++ ++ actual_rate = (unsigned long)clk_hifiberry_dacpro_round_rate(hw, rate, ++ &parent_rate); ++ clk->mode = (actual_rate == CLK_44EN_RATE) ? 0 : 1; ++ return 0; ++} ++ ++ ++const struct clk_ops clk_hifiberry_dacpro_rate_ops = { ++ .recalc_rate = clk_hifiberry_dacpro_recalc_rate, ++ .round_rate = clk_hifiberry_dacpro_round_rate, ++ .set_rate = clk_hifiberry_dacpro_set_rate, ++}; ++ ++static int clk_hifiberry_dacpro_probe(struct platform_device *pdev) ++{ ++ int ret; ++ struct clk_hifiberry_hw *proclk; ++ struct clk *clk; ++ struct device *dev; ++ struct clk_init_data init; ++ ++ dev = &pdev->dev; ++ ++ proclk = kzalloc(sizeof(struct clk_hifiberry_hw), GFP_KERNEL); ++ if (!proclk) ++ return -ENOMEM; ++ ++ init.name = "clk-hifiberry-dacpro"; ++ init.ops = &clk_hifiberry_dacpro_rate_ops; ++ init.flags = CLK_IS_BASIC; ++ init.parent_names = NULL; ++ init.num_parents = 0; ++ ++ proclk->mode = 0; ++ proclk->hw.init = &init; ++ ++ clk = devm_clk_register(dev, &proclk->hw); ++ if (!IS_ERR(clk)) { ++ ret = of_clk_add_provider(dev->of_node, of_clk_src_simple_get, ++ clk); ++ } else { ++ dev_err(dev, "Fail to register clock driver\n"); ++ kfree(proclk); ++ ret = PTR_ERR(clk); ++ } ++ return ret; ++} ++ ++static int clk_hifiberry_dacpro_remove(struct platform_device *pdev) ++{ ++ of_clk_del_provider(pdev->dev.of_node); ++ return 0; ++} ++ ++static struct platform_driver clk_hifiberry_dacpro_driver = { ++ .probe = clk_hifiberry_dacpro_probe, ++ .remove = clk_hifiberry_dacpro_remove, ++ .driver = { ++ .name = "clk-hifiberry-dacpro", ++ .of_match_table = clk_hifiberry_dacpro_dt_ids, ++ }, ++}; ++ ++static int __init clk_hifiberry_dacpro_init(void) ++{ ++ return platform_driver_register(&clk_hifiberry_dacpro_driver); ++} ++core_initcall(clk_hifiberry_dacpro_init); ++ ++static void __exit clk_hifiberry_dacpro_exit(void) ++{ ++ platform_driver_unregister(&clk_hifiberry_dacpro_driver); ++} ++module_exit(clk_hifiberry_dacpro_exit); ++ ++MODULE_DESCRIPTION("HiFiBerry DAC Pro clock driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:clk-hifiberry-dacpro"); +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 8272ba5302b1..4473cc728097 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + help + Say Y or M if you want to add support for HifiBerry DAC. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUS ++ tristate "Support for HifiBerry DAC+" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x ++ help ++ Say Y or M if you want to add support for HifiBerry DAC+. ++ + config SND_BCM2708_SOC_HIFIBERRY_DIGI + tristate "Support for HifiBerry Digi" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index fcac518ca9b4..203afc03167a 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,11 +10,13 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +diff --git a/sound/soc/bcm/hifiberry_dacplus.c b/sound/soc/bcm/hifiberry_dacplus.c +new file mode 100644 +index 000000000000..bdc35e7e6bc1 +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplus.c +@@ -0,0 +1,359 @@ ++/* ++ * ASoC Driver for HiFiBerry DAC+ / DAC Pro ++ * ++ * Author: Daniel Matuschek, Stuart MacLean ++ * Copyright 2014-2015 ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++ ++#define HIFIBERRY_DACPRO_NOCLOCK 0 ++#define HIFIBERRY_DACPRO_CLK44EN 1 ++#define HIFIBERRY_DACPRO_CLK48EN 2 ++ ++struct pcm512x_priv { ++ struct regmap *regmap; ++ struct clk *sclk; ++}; ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++static bool slave; ++static bool snd_rpi_hifiberry_is_dacpro; ++static bool digital_gain_0db_limit = true; ++ ++static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_codec *codec, ++ int clk_id) ++{ ++ switch (clk_id) { ++ case HIFIBERRY_DACPRO_NOCLOCK: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x00); ++ break; ++ case HIFIBERRY_DACPRO_CLK44EN: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x20); ++ break; ++ case HIFIBERRY_DACPRO_CLK48EN: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x04); ++ break; ++ } ++} ++ ++static void snd_rpi_hifiberry_dacplus_clk_gpio(struct snd_soc_codec *codec) ++{ ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x24, 0x24); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_sclk(struct snd_soc_codec *codec) ++{ ++ int sck; ++ ++ sck = snd_soc_read(codec, PCM512x_RATE_DET_4); ++ return (!(sck & 0x40)); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_sclk_sleep( ++ struct snd_soc_codec *codec) ++{ ++ msleep(2); ++ return snd_rpi_hifiberry_dacplus_is_sclk(codec); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_pro_card(struct snd_soc_codec *codec) ++{ ++ bool isClk44EN, isClk48En, isNoClk; ++ ++ snd_rpi_hifiberry_dacplus_clk_gpio(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK44EN); ++ isClk44EN = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_NOCLOCK); ++ isNoClk = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK48EN); ++ isClk48En = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ return (isClk44EN && isClk48En && !isNoClk); ++} ++ ++static int snd_rpi_hifiberry_dacplus_clk_for_rate(int sample_rate) ++{ ++ int type; ++ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ type = HIFIBERRY_DACPRO_CLK44EN; ++ break; ++ default: ++ type = HIFIBERRY_DACPRO_CLK48EN; ++ break; ++ } ++ return type; ++} ++ ++static void snd_rpi_hifiberry_dacplus_set_sclk(struct snd_soc_codec *codec, ++ int sample_rate) ++{ ++ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); ++ ++ if (!IS_ERR(pcm512x->sclk)) { ++ int ctype; ++ ++ ctype = snd_rpi_hifiberry_dacplus_clk_for_rate(sample_rate); ++ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) ++ ? CLK_44EN_RATE : CLK_48EN_RATE); ++ snd_rpi_hifiberry_dacplus_select_clk(codec, ctype); ++ } ++} ++ ++static int snd_rpi_hifiberry_dacplus_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct pcm512x_priv *priv; ++ ++ if (slave) ++ snd_rpi_hifiberry_is_dacpro = false; ++ else ++ snd_rpi_hifiberry_is_dacpro = ++ snd_rpi_hifiberry_dacplus_is_pro_card(codec); ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry DAC+ Pro"; ++ dai->stream_name = "HiFiBerry DAC+ Pro HiFi"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM; ++ ++ snd_soc_update_bits(codec, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); ++ snd_soc_update_bits(codec, PCM512x_MASTER_MODE, 0x03, 0x03); ++ snd_soc_update_bits(codec, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); ++ } else { ++ priv = snd_soc_codec_get_drvdata(codec); ++ priv->sclk = ERR_PTR(-ENOENT); ++ } ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplus_update_rate_den( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); ++ struct snd_ratnum *rats_no_pll; ++ unsigned int num = 0, den = 0; ++ int err; ++ ++ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); ++ if (!rats_no_pll) ++ return -ENOMEM; ++ ++ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; ++ rats_no_pll->den_min = 1; ++ rats_no_pll->den_max = 128; ++ rats_no_pll->den_step = 1; ++ ++ err = snd_interval_ratnum(hw_param_interval(params, ++ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); ++ if (err >= 0 && den) { ++ params->rate_num = num; ++ params->rate_den = den; ++ } ++ ++ devm_kfree(rtd->dev, rats_no_pll); ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro( ++ struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params) ++{ ++ int bratio = snd_pcm_format_physical_width(params_format(params)) ++ * params_channels(params); ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, bratio); ++} ++ ++static int snd_rpi_hifiberry_dacplus_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ int ret; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_rpi_hifiberry_dacplus_set_sclk(codec, ++ params_rate(params)); ++ ++ ret = snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro(cpu_dai, ++ params); ++ if (!ret) ++ ret = snd_rpi_hifiberry_dacplus_update_rate_den( ++ substream, params); ++ } else { ++ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++ } ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplus_startup( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplus_shutdown( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dacplus_ops = { ++ .hw_params = snd_rpi_hifiberry_dacplus_hw_params, ++ .startup = snd_rpi_hifiberry_dacplus_startup, ++ .shutdown = snd_rpi_hifiberry_dacplus_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dacplus_dai[] = { ++{ ++ .name = "HiFiBerry DAC+", ++ .stream_name = "HiFiBerry DAC+ HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dacplus_ops, ++ .init = snd_rpi_hifiberry_dacplus_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dacplus = { ++ .name = "snd_rpi_hifiberry_dacplus", ++ .driver_name = "HifiberryDacp", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dacplus_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplus_dai), ++}; ++ ++static int snd_rpi_hifiberry_dacplus_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_dacplus.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_hifiberry_dacplus_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "hifiberry,24db_digital_gain"); ++ slave = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplus,slave"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplus_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_dacplus); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dacplus_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dacplus", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplus_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dacplus_driver = { ++ .driver = { ++ .name = "snd-rpi-hifiberry-dacplus", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dacplus_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dacplus_probe, ++ .remove = snd_rpi_hifiberry_dacplus_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dacplus_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+"); ++MODULE_LICENSE("GPL v2"); +diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c +index 72b19e62f626..c6839ef6e167 100644 +--- a/sound/soc/codecs/pcm512x.c ++++ b/sound/soc/codecs/pcm512x.c +@@ -854,7 +854,8 @@ static int pcm512x_set_dividers(struct snd_soc_dai *dai, + int fssp; + int gpio; + +- lrclk_div = snd_soc_params_to_frame_size(params); ++ lrclk_div = snd_pcm_format_physical_width(params_format(params)) ++ * params_channels(params); + if (lrclk_div == 0) { + dev_err(dev, "No LRCLK?\n"); + return -EINVAL; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1072_9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1072_9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1072_9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1072_9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,831 @@ +commit 9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c +Author: Daniel Matuschek +Date: Mon Aug 4 11:09:58 2014 +0200 + + Added driver for HiFiBerry Amp amplifier add-on board + + The driver contains a low-level hardware driver for the TAS5713 and the + drivers for the Raspberry Pi I2S subsystem. + + TAS5713: return error if initialisation fails + + Existing TAS5713 driver logs errors during initialisation, but does not return + an error code. Therefore even if initialisation fails, the driver will still be + loaded, but won't work. This patch fixes this. I2C communication error will now + reported correctly by a non-zero return code. + + HiFiBerry Amp: fix device-tree problems + + Some code to load the driver based on device-tree-overlays was missing. This is added by this patch. + + hifiberry-amp: Adjust for ALSA object refactoring + + See: https://github.com/raspberrypi/linux/issues/1775 + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 4473cc728097..b1d877407dd6 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -38,6 +38,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DIGI + help + Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. + ++config SND_BCM2708_SOC_HIFIBERRY_AMP ++ tristate "Support for the HifiBerry Amp" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_TAS5713 ++ help ++ Say Y or M if you want to add support for the HifiBerry Amp amplifier board. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 203afc03167a..8ffe0725ba10 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -9,12 +9,14 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support ++snd-soc-hifiberry-amp-objs := hifiberry_amp.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o +diff --git a/sound/soc/bcm/hifiberry_amp.c b/sound/soc/bcm/hifiberry_amp.c +new file mode 100644 +index 000000000000..d17c29780507 +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_amp.c +@@ -0,0 +1,129 @@ ++/* ++ * ASoC Driver for HifiBerry AMP ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_hifiberry_amp_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ // ToDo: init of the dsp-registers. ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_amp_hw_params( struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params ) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++ ++static struct snd_soc_ops snd_rpi_hifiberry_amp_ops = { ++ .hw_params = snd_rpi_hifiberry_amp_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_amp_dai[] = { ++ { ++ .name = "HifiBerry AMP", ++ .stream_name = "HifiBerry AMP HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "tas5713-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "tas5713.1-001b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_amp_ops, ++ .init = snd_rpi_hifiberry_amp_init, ++ }, ++}; ++ ++ ++static struct snd_soc_card snd_rpi_hifiberry_amp = { ++ .name = "snd_rpi_hifiberry_amp", ++ .driver_name = "HifiberryAmp", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_amp_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_amp_dai), ++}; ++ ++static const struct of_device_id snd_rpi_hifiberry_amp_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-amp", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_amp_of_match); ++ ++ ++static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_amp.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_amp_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); ++ ++ if (ret != 0) { ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++ ++static int snd_rpi_hifiberry_amp_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_amp); ++} ++ ++ ++static struct platform_driver snd_rpi_hifiberry_amp_driver = { ++ .driver = { ++ .name = "snd-hifiberry-amp", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_amp_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_amp_probe, ++ .remove = snd_rpi_hifiberry_amp_remove, ++}; ++ ++ ++module_platform_driver(snd_rpi_hifiberry_amp_driver); ++ ++ ++MODULE_AUTHOR("Sebastian Eickhoff "); ++MODULE_DESCRIPTION("ASoC driver for HiFiBerry-AMP"); ++MODULE_LICENSE("GPL v2"); +diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig +index 74a93e52bdc8..9824cdd04b0c 100644 +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -139,6 +139,7 @@ config SND_SOC_ALL_CODECS + select SND_SOC_TFA9879 if I2C + select SND_SOC_TLV320AIC23_I2C if I2C + select SND_SOC_TLV320AIC23_SPI if SPI_MASTER ++ select SND_SOC_TAS5713 if I2C + select SND_SOC_TLV320AIC26 if SPI_MASTER + select SND_SOC_TLV320AIC31XX if I2C + select SND_SOC_TLV320AIC32X4_I2C if I2C +@@ -821,6 +822,9 @@ config SND_SOC_TFA9879 + tristate "NXP Semiconductors TFA9879 amplifier" + depends on I2C + ++config SND_SOC_TAS5713 ++ tristate ++ + config SND_SOC_TLV320AIC23 + tristate + +diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile +index 77786e7f44a7..5a2db0d2fe2f 100644 +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -144,6 +144,7 @@ snd-soc-tas5086-objs := tas5086.o + snd-soc-tas571x-objs := tas571x.o + snd-soc-tas5720-objs := tas5720.o + snd-soc-tfa9879-objs := tfa9879.o ++snd-soc-tas5713-objs := tas5713.o + snd-soc-tlv320aic23-objs := tlv320aic23.o + snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o + snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o +@@ -366,6 +367,7 @@ obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o + obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o + obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o + obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o ++obj-$(CONFIG_SND_SOC_TAS5713) += snd-soc-tas5713.o + obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o + obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o + obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o +diff --git a/sound/soc/codecs/tas5713.c b/sound/soc/codecs/tas5713.c +new file mode 100644 +index 000000000000..560234d58a6b +--- /dev/null ++++ b/sound/soc/codecs/tas5713.c +@@ -0,0 +1,371 @@ ++/* ++ * ASoC Driver for TAS5713 ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "tas5713.h" ++ ++ ++static struct i2c_client *i2c; ++ ++struct tas5713_priv { ++ struct regmap *regmap; ++ int mclk_div; ++ struct snd_soc_codec *codec; ++}; ++ ++static struct tas5713_priv *priv_data; ++ ++ ++ ++ ++/* ++ * _ _ ___ _ ___ _ _ ++ * /_\ | | / __| /_\ / __|___ _ _| |_ _ _ ___| |___ ++ * / _ \| |__\__ \/ _ \ | (__/ _ \ ' \ _| '_/ _ \ (_-< ++ * /_/ \_\____|___/_/ \_\ \___\___/_||_\__|_| \___/_/__/ ++ * ++ */ ++ ++static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1); ++ ++ ++static const struct snd_kcontrol_new tas5713_snd_controls[] = { ++ SOC_SINGLE_TLV ("Master" , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv), ++ SOC_DOUBLE_R_TLV("Channels" , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv) ++}; ++ ++ ++ ++ ++/* ++ * __ __ _ _ ___ _ ++ * | \/ |__ _ __| |_ (_)_ _ ___ | \ _ _(_)_ _____ _ _ ++ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_| ++ * |_| |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static int tas5713_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) ++{ ++ u16 blen = 0x00; ++ ++ struct snd_soc_codec *codec; ++ codec = dai->codec; ++ priv_data->codec = dai->codec; ++ ++ switch (params_format(params)) { ++ case SNDRV_PCM_FORMAT_S16_LE: ++ blen = 0x03; ++ break; ++ case SNDRV_PCM_FORMAT_S20_3LE: ++ blen = 0x1; ++ break; ++ case SNDRV_PCM_FORMAT_S24_LE: ++ blen = 0x04; ++ break; ++ case SNDRV_PCM_FORMAT_S32_LE: ++ blen = 0x05; ++ break; ++ default: ++ dev_err(dai->dev, "Unsupported word length: %u\n", ++ params_format(params)); ++ return -EINVAL; ++ } ++ ++ // set word length ++ snd_soc_update_bits(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen); ++ ++ return 0; ++} ++ ++ ++static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream) ++{ ++ unsigned int val = 0; ++ ++ struct tas5713_priv *tas5713; ++ struct snd_soc_codec *codec = dai->codec; ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ if (mute) { ++ val = TAS5713_SOFT_MUTE_ALL; ++ } ++ ++ return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val); ++} ++ ++ ++static const struct snd_soc_dai_ops tas5713_dai_ops = { ++ .hw_params = tas5713_hw_params, ++ .mute_stream = tas5713_mute_stream, ++}; ++ ++ ++static struct snd_soc_dai_driver tas5713_dai = { ++ .name = "tas5713-hifi", ++ .playback = { ++ .stream_name = "Playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_48000, ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ), ++ }, ++ .ops = &tas5713_dai_ops, ++}; ++ ++ ++ ++ ++/* ++ * ___ _ ___ _ ++ * / __|___ __| |___ __ | \ _ _(_)_ _____ _ _ ++ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_| ++ * \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static int tas5713_remove(struct snd_soc_codec *codec) ++{ ++ struct tas5713_priv *tas5713; ++ ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ return 0; ++} ++ ++ ++static int tas5713_probe(struct snd_soc_codec *codec) ++{ ++ struct tas5713_priv *tas5713; ++ int i, ret; ++ ++ i2c = container_of(codec->dev, struct i2c_client, dev); ++ ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ // Reset error ++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); ++ if (ret < 0) return ret; ++ ++ // Trim oscillator ++ ret = snd_soc_write(codec, TAS5713_OSC_TRIM, 0x00); ++ if (ret < 0) return ret; ++ msleep(1000); ++ ++ // Reset error ++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); ++ if (ret < 0) return ret; ++ ++ // Clock mode: 44/48kHz, MCLK=64xfs ++ ret = snd_soc_write(codec, TAS5713_CLOCK_CTRL, 0x60); ++ if (ret < 0) return ret; ++ ++ // I2S 24bit ++ ret = snd_soc_write(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x05); ++ if (ret < 0) return ret; ++ ++ // Unmute ++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); ++ if (ret < 0) return ret; ++ ret = snd_soc_write(codec, TAS5713_SOFT_MUTE, 0x00); ++ if (ret < 0) return ret; ++ ++ // Set volume to 0db ++ ret = snd_soc_write(codec, TAS5713_VOL_MASTER, 0x00); ++ if (ret < 0) return ret; ++ ++ // Now start programming the default initialization sequence ++ for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) { ++ ret = i2c_master_send(i2c, ++ tas5713_init_sequence[i].data, ++ tas5713_init_sequence[i].size); ++ if (ret < 0) { ++ printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret); ++ } ++ } ++ ++ // Unmute ++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); ++ if (ret < 0) return ret; ++ ++ return 0; ++} ++ ++ ++static struct snd_soc_codec_driver soc_codec_dev_tas5713 = { ++ .probe = tas5713_probe, ++ .remove = tas5713_remove, ++ .component_driver = { ++ .controls = tas5713_snd_controls, ++ .num_controls = ARRAY_SIZE(tas5713_snd_controls), ++ }, ++}; ++ ++ ++ ++ ++/* ++ * ___ ___ ___ ___ _ ++ * |_ _|_ ) __| | \ _ _(_)_ _____ _ _ ++ * | | / / (__ | |) | '_| \ V / -_) '_| ++ * |___/___\___| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static const struct reg_default tas5713_reg_defaults[] = { ++ { 0x07 ,0x80 }, // R7 - VOL_MASTER - -40dB ++ { 0x08 , 30 }, // R8 - VOL_CH1 - 0dB ++ { 0x09 , 30 }, // R9 - VOL_CH2 - 0dB ++ { 0x0A ,0x80 }, // R10 - VOL_HEADPHONE - -40dB ++}; ++ ++ ++static bool tas5713_reg_volatile(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case TAS5713_DEVICE_ID: ++ case TAS5713_ERROR_STATUS: ++ return true; ++ default: ++ return false; ++ } ++} ++ ++ ++static const struct of_device_id tas5713_of_match[] = { ++ { .compatible = "ti,tas5713", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, tas5713_of_match); ++ ++ ++static struct regmap_config tas5713_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ ++ .max_register = TAS5713_MAX_REGISTER, ++ .volatile_reg = tas5713_reg_volatile, ++ ++ .cache_type = REGCACHE_RBTREE, ++ .reg_defaults = tas5713_reg_defaults, ++ .num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults), ++}; ++ ++ ++static int tas5713_i2c_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ int ret; ++ ++ priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL); ++ if (!priv_data) ++ return -ENOMEM; ++ ++ priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config); ++ if (IS_ERR(priv_data->regmap)) { ++ ret = PTR_ERR(priv_data->regmap); ++ return ret; ++ } ++ ++ i2c_set_clientdata(i2c, priv_data); ++ ++ ret = snd_soc_register_codec(&i2c->dev, ++ &soc_codec_dev_tas5713, &tas5713_dai, 1); ++ ++ return ret; ++} ++ ++ ++static int tas5713_i2c_remove(struct i2c_client *i2c) ++{ ++ snd_soc_unregister_codec(&i2c->dev); ++ i2c_set_clientdata(i2c, NULL); ++ ++ kfree(priv_data); ++ ++ return 0; ++} ++ ++ ++static const struct i2c_device_id tas5713_i2c_id[] = { ++ { "tas5713", 0 }, ++ { } ++}; ++ ++MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id); ++ ++ ++static struct i2c_driver tas5713_i2c_driver = { ++ .driver = { ++ .name = "tas5713", ++ .owner = THIS_MODULE, ++ .of_match_table = tas5713_of_match, ++ }, ++ .probe = tas5713_i2c_probe, ++ .remove = tas5713_i2c_remove, ++ .id_table = tas5713_i2c_id ++}; ++ ++ ++static int __init tas5713_modinit(void) ++{ ++ int ret = 0; ++ ++ ret = i2c_add_driver(&tas5713_i2c_driver); ++ if (ret) { ++ printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n", ++ ret); ++ } ++ ++ return ret; ++} ++module_init(tas5713_modinit); ++ ++ ++static void __exit tas5713_exit(void) ++{ ++ i2c_del_driver(&tas5713_i2c_driver); ++} ++module_exit(tas5713_exit); ++ ++ ++MODULE_AUTHOR("Sebastian Eickhoff "); ++MODULE_DESCRIPTION("ASoC driver for TAS5713"); ++MODULE_LICENSE("GPL v2"); +diff --git a/sound/soc/codecs/tas5713.h b/sound/soc/codecs/tas5713.h +new file mode 100644 +index 000000000000..8f019e048987 +--- /dev/null ++++ b/sound/soc/codecs/tas5713.h +@@ -0,0 +1,210 @@ ++/* ++ * ASoC Driver for TAS5713 ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#ifndef _TAS5713_H ++#define _TAS5713_H ++ ++ ++// TAS5713 I2C-bus register addresses ++ ++#define TAS5713_CLOCK_CTRL 0x00 ++#define TAS5713_DEVICE_ID 0x01 ++#define TAS5713_ERROR_STATUS 0x02 ++#define TAS5713_SYSTEM_CTRL1 0x03 ++#define TAS5713_SERIAL_DATA_INTERFACE 0x04 ++#define TAS5713_SYSTEM_CTRL2 0x05 ++#define TAS5713_SOFT_MUTE 0x06 ++#define TAS5713_VOL_MASTER 0x07 ++#define TAS5713_VOL_CH1 0x08 ++#define TAS5713_VOL_CH2 0x09 ++#define TAS5713_VOL_HEADPHONE 0x0A ++#define TAS5713_VOL_CONFIG 0x0E ++#define TAS5713_MODULATION_LIMIT 0x10 ++#define TAS5713_IC_DLY_CH1 0x11 ++#define TAS5713_IC_DLY_CH2 0x12 ++#define TAS5713_IC_DLY_CH3 0x13 ++#define TAS5713_IC_DLY_CH4 0x14 ++ ++#define TAS5713_START_STOP_PERIOD 0x1A ++#define TAS5713_OSC_TRIM 0x1B ++#define TAS5713_BKND_ERR 0x1C ++ ++#define TAS5713_INPUT_MUX 0x20 ++#define TAS5713_SRC_SELECT_CH4 0x21 ++#define TAS5713_PWM_MUX 0x25 ++ ++#define TAS5713_CH1_BQ0 0x29 ++#define TAS5713_CH1_BQ1 0x2A ++#define TAS5713_CH1_BQ2 0x2B ++#define TAS5713_CH1_BQ3 0x2C ++#define TAS5713_CH1_BQ4 0x2D ++#define TAS5713_CH1_BQ5 0x2E ++#define TAS5713_CH1_BQ6 0x2F ++#define TAS5713_CH1_BQ7 0x58 ++#define TAS5713_CH1_BQ8 0x59 ++ ++#define TAS5713_CH2_BQ0 0x30 ++#define TAS5713_CH2_BQ1 0x31 ++#define TAS5713_CH2_BQ2 0x32 ++#define TAS5713_CH2_BQ3 0x33 ++#define TAS5713_CH2_BQ4 0x34 ++#define TAS5713_CH2_BQ5 0x35 ++#define TAS5713_CH2_BQ6 0x36 ++#define TAS5713_CH2_BQ7 0x5C ++#define TAS5713_CH2_BQ8 0x5D ++ ++#define TAS5713_CH4_BQ0 0x5A ++#define TAS5713_CH4_BQ1 0x5B ++#define TAS5713_CH3_BQ0 0x5E ++#define TAS5713_CH3_BQ1 0x5F ++ ++#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA 0x3B ++#define TAS5713_DRC1_ATTACK_RELEASE_RATE 0x3C ++#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA 0x3E ++#define TAS5713_DRC2_ATTACK_RELEASE_RATE 0x3F ++#define TAS5713_DRC1_ATTACK_RELEASE_THRES 0x40 ++#define TAS5713_DRC2_ATTACK_RELEASE_THRES 0x43 ++#define TAS5713_DRC_CTRL 0x46 ++ ++#define TAS5713_BANK_SW_CTRL 0x50 ++#define TAS5713_CH1_OUTPUT_MIXER 0x51 ++#define TAS5713_CH2_OUTPUT_MIXER 0x52 ++#define TAS5713_CH1_INPUT_MIXER 0x53 ++#define TAS5713_CH2_INPUT_MIXER 0x54 ++#define TAS5713_OUTPUT_POST_SCALE 0x56 ++#define TAS5713_OUTPUT_PRESCALE 0x57 ++ ++#define TAS5713_IDF_POST_SCALE 0x62 ++ ++#define TAS5713_CH1_INLINE_MIXER 0x70 ++#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71 ++#define TAS5713_CH1_R_CHANNEL_MIXER 0x72 ++#define TAS5713_CH1_L_CHANNEL_MIXER 0x73 ++#define TAS5713_CH2_INLINE_MIXER 0x74 ++#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75 ++#define TAS5713_CH2_L_CHANNEL_MIXER 0x76 ++#define TAS5713_CH2_R_CHANNEL_MIXER 0x77 ++ ++#define TAS5713_UPDATE_DEV_ADDR_KEY 0xF8 ++#define TAS5713_UPDATE_DEV_ADDR_REG 0xF9 ++ ++#define TAS5713_REGISTER_COUNT 0x46 ++#define TAS5713_MAX_REGISTER 0xF9 ++ ++ ++// Bitmasks for registers ++#define TAS5713_SOFT_MUTE_ALL 0x07 ++ ++ ++ ++struct tas5713_init_command { ++ const int size; ++ const char *const data; ++}; ++ ++static const struct tas5713_init_command tas5713_init_sequence[] = { ++ ++ // Trim oscillator ++ { .size = 2, .data = "\x1B\x00" }, ++ // System control register 1 (0x03): block DC ++ { .size = 2, .data = "\x03\x80" }, ++ // Mute everything ++ { .size = 2, .data = "\x05\x40" }, ++ // Modulation limit register (0x10): 97.7% ++ { .size = 2, .data = "\x10\x02" }, ++ // Interchannel delay registers ++ // (0x11, 0x12, 0x13, and 0x14): BD mode ++ { .size = 2, .data = "\x11\xB8" }, ++ { .size = 2, .data = "\x12\x60" }, ++ { .size = 2, .data = "\x13\xA0" }, ++ { .size = 2, .data = "\x14\x48" }, ++ // PWM shutdown group register (0x19): no shutdown ++ { .size = 2, .data = "\x19\x00" }, ++ // Input multiplexer register (0x20): BD mode ++ { .size = 2, .data = "\x20\x00\x89\x77\x72" }, ++ // PWM output mux register (0x25) ++ // Channel 1 --> OUTA, channel 1 neg --> OUTB ++ // Channel 2 --> OUTC, channel 2 neg --> OUTD ++ { .size = 5, .data = "\x25\x01\x02\x13\x45" }, ++ // DRC control (0x46): DRC off ++ { .size = 5, .data = "\x46\x00\x00\x00\x00" }, ++ // BKND_ERR register (0x1C): 299ms reset period ++ { .size = 2, .data = "\x1C\x07" }, ++ // Mute channel 3 ++ { .size = 2, .data = "\x0A\xFF" }, ++ // Volume configuration register (0x0E): volume slew 512 steps ++ { .size = 2, .data = "\x0E\x90" }, ++ // Clock control register (0x00): 44/48kHz, MCLK=64xfs ++ { .size = 2, .data = "\x00\x60" }, ++ // Bank switch and eq control (0x50): no bank switching ++ { .size = 5, .data = "\x50\x00\x00\x00\x00" }, ++ // Volume registers (0x07, 0x08, 0x09, 0x0A) ++ { .size = 2, .data = "\x07\x20" }, ++ { .size = 2, .data = "\x08\x30" }, ++ { .size = 2, .data = "\x09\x30" }, ++ { .size = 2, .data = "\x0A\xFF" }, ++ // 0x72, 0x73, 0x76, 0x77 input mixer: ++ // no intermix between channels ++ { .size = 5, .data = "\x72\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x73\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x76\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x77\x00\x80\x00\x00" }, ++ // 0x70, 0x71, 0x74, 0x75 inline DRC mixer: ++ // no inline DRC inmix ++ { .size = 5, .data = "\x70\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x71\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x74\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x75\x00\x00\x00\x00" }, ++ // 0x56, 0x57 Output scale ++ { .size = 5, .data = "\x56\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x57\x00\x02\x00\x00" }, ++ // 0x3B, 0x3c ++ { .size = 9, .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" }, ++ { .size = 9, .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" }, ++ { .size = 9, .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ // 0x51, 0x52: output mixer ++ { .size = 9, .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" }, ++ { .size = 9, .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" }, ++ // PEQ defaults ++ { .size = 21, .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++}; ++ ++ ++#endif /* _TAS5713_H */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1073_518dcbdb91a8fe5968013ff653ab80daa74d030a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1073_518dcbdb91a8fe5968013ff653ab80daa74d030a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1073_518dcbdb91a8fe5968013ff653ab80daa74d030a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1073_518dcbdb91a8fe5968013ff653ab80daa74d030a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,27 @@ +commit 518dcbdb91a8fe5968013ff653ab80daa74d030a +Author: Ryan Coe +Date: Sat Jan 31 18:25:49 2015 -0700 + + Update ds1307 driver for device-tree support + + Signed-off-by: Ryan Coe + +diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c +index 4e31036ee259..b92044cf03e7 100644 +--- a/drivers/rtc/rtc-ds1307.c ++++ b/drivers/rtc/rtc-ds1307.c +@@ -1675,6 +1675,14 @@ static int ds1307_remove(struct i2c_client *client) + return 0; + } + ++#ifdef CONFIG_OF ++static const struct of_device_id ds1307_of_match[] = { ++ { .compatible = "maxim,ds1307" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, ds1307_of_match); ++#endif ++ + static struct i2c_driver ds1307_driver = { + .driver = { + .name = "rtc-ds1307", diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1074_36ad0671c0c7a922f471ac23d361ddf9e644efd0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1074_36ad0671c0c7a922f471ac23d361ddf9e644efd0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1074_36ad0671c0c7a922f471ac23d361ddf9e644efd0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1074_36ad0671c0c7a922f471ac23d361ddf9e644efd0.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,213 @@ +commit 36ad0671c0c7a922f471ac23d361ddf9e644efd0 +Author: Waldemar Brodkorb +Date: Wed Mar 25 09:26:17 2015 +0100 + + Add driver for rpi-proto + + Forward port of 3.10.x driver from https://github.com/koalo + We are using a custom board and would like to use rpi 3.18.x + kernel. Patch works fine for our embedded system. + + URL to the audio chip: + http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/ + + Playback tested with devicetree enabled. + + Signed-off-by: Waldemar Brodkorb + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index b1d877407dd6..eb5a5a14731b 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -52,6 +52,13 @@ config SND_BCM2708_SOC_RPI_DAC + help + Say Y or M if you want to add support for RPi-DAC. + ++config SND_BCM2708_SOC_RPI_PROTO ++ tristate "Support for Rpi-PROTO" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8731 ++ help ++ Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). ++ + config SND_BCM2708_SOC_IQAUDIO_DAC + tristate "Support for IQaudIO-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 8ffe0725ba10..5793c83cf2f5 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -14,6 +14,7 @@ snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o ++snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -21,4 +22,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +diff --git a/sound/soc/bcm/rpi-proto.c b/sound/soc/bcm/rpi-proto.c +new file mode 100644 +index 000000000000..9db678e885ef +--- /dev/null ++++ b/sound/soc/bcm/rpi-proto.c +@@ -0,0 +1,154 @@ ++/* ++ * ASoC driver for PROTO AudioCODEC (with a WM8731) ++ * connected to a Raspberry Pi ++ * ++ * Author: Florian Meier, ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8731.h" ++ ++static const unsigned int wm8731_rates_12288000[] = { ++ 8000, 32000, 48000, 96000, ++}; ++ ++static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = { ++ .list = wm8731_rates_12288000, ++ .count = ARRAY_SIZE(wm8731_rates_12288000), ++}; ++ ++static int snd_rpi_proto_startup(struct snd_pcm_substream *substream) ++{ ++ /* Setup constraints, because there is a 12.288 MHz XTAL on the board */ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &wm8731_constraints_12288000); ++ return 0; ++} ++ ++static int snd_rpi_proto_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ int sysclk = 12288000; /* This is fixed on this board */ ++ ++ /* Set proto bclk */ ++ int ret = snd_soc_dai_set_bclk_ratio(cpu_dai,32*2); ++ if (ret < 0){ ++ dev_err(codec->dev, ++ "Failed to set BCLK ratio %d\n", ret); ++ return ret; ++ } ++ ++ /* Set proto sysclk */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, ++ sysclk, SND_SOC_CLOCK_IN); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8731 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_proto_ops = { ++ .startup = snd_rpi_proto_startup, ++ .hw_params = snd_rpi_proto_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_proto_dai[] = { ++{ ++ .name = "WM8731", ++ .stream_name = "WM8731 HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8731-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8731.1-001a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_proto_ops, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_proto = { ++ .name = "snd_rpi_proto", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_proto_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_proto_dai), ++}; ++ ++static int snd_rpi_proto_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_proto.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_proto_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_proto); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++ ++static int snd_rpi_proto_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_proto); ++} ++ ++static const struct of_device_id snd_rpi_proto_of_match[] = { ++ { .compatible = "rpi,rpi-proto", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_proto_of_match); ++ ++static struct platform_driver snd_rpi_proto_driver = { ++ .driver = { ++ .name = "snd-rpi-proto", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_proto_of_match, ++ }, ++ .probe = snd_rpi_proto_probe, ++ .remove = snd_rpi_proto_remove, ++}; ++ ++module_platform_driver(snd_rpi_proto_driver); ++ ++MODULE_AUTHOR("Florian Meier"); ++MODULE_DESCRIPTION("ASoC Driver for Raspberry Pi connected to PROTO board (WM8731)"); ++MODULE_LICENSE("GPL"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1075_42ce650cf2a0ac3a9843918899d0fc203521c629.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1075_42ce650cf2a0ac3a9843918899d0fc203521c629.patch --- linux-4.9.13/debian/patches/rpi/rpi_1075_42ce650cf2a0ac3a9843918899d0fc203521c629.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1075_42ce650cf2a0ac3a9843918899d0fc203521c629.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,240 @@ +commit 42ce650cf2a0ac3a9843918899d0fc203521c629 +Author: Jan Grulich +Date: Mon Aug 24 16:03:47 2015 +0100 + + RaspiDAC3 support + + Signed-off-by: Jan Grulich + + config: fix RaspiDAC Rev.3x dependencies + + Change depends to SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S + like the other I2S soundcard drivers. + + Signed-off-by: Matthias Reichl + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index eb5a5a14731b..a2e74be19fa7 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -65,3 +65,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC + select SND_SOC_PCM512x_I2C + help + Say Y or M if you want to add support for IQaudIO-DAC. ++ ++config SND_BCM2708_SOC_RASPIDAC3 ++ tristate "Support for RaspiDAC Rev.3x" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ select SND_SOC_TPA6130A2 ++ help ++ Say Y or M if you want to add support for RaspiDAC Rev.3x. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 5793c83cf2f5..c07879810681 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -16,6 +16,7 @@ snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o ++snd-soc-raspidac3-objs := raspidac3.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o +@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o +diff --git a/sound/soc/bcm/raspidac3.c b/sound/soc/bcm/raspidac3.c +new file mode 100644 +index 000000000000..dd9eeea2af03 +--- /dev/null ++++ b/sound/soc/bcm/raspidac3.c +@@ -0,0 +1,186 @@ ++/* ++ * ASoC Driver for RaspiDAC v3 ++ * ++ * Author: Jan Grulich ++ * Copyright 2015 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++#include "../codecs/tpa6130a2.h" ++ ++/* sound card init */ ++static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ else { ++ struct snd_kcontrol *kctl; ++ ++ ret = snd_soc_limit_volume(card, ++ "TPA6130A2 Headphone Playback Volume", ++ 54); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n", ++ ret); ++ kctl = snd_soc_card_get_kcontrol(card, ++ "TPA6130A2 Headphone Playback Volume"); ++ if (kctl) { ++ strcpy(kctl->id.name, "Headphones Playback Volume"); ++ /* disable the volume dB scale so alsamixer works */ ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ } ++ ++ kctl = snd_soc_card_get_kcontrol(card, ++ "TPA6130A2 Headphone Playback Switch"); ++ if (kctl) ++ strcpy(kctl->id.name, "Headphones Playback Switch"); ++ } ++ ++ return 0; ++} ++ ++/* set hw parameters */ ++static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* startup */ ++static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ return 0; ++} ++ ++/* shutdown */ ++static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_raspidac3_ops = { ++ .hw_params = snd_rpi_raspidac3_hw_params, ++ .startup = snd_rpi_raspidac3_startup, ++ .shutdown = snd_rpi_raspidac3_shutdown, ++}; ++ ++/* interface setup */ ++static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = { ++{ ++ .name = "RaspiDAC Rev.3x", ++ .stream_name = "RaspiDAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_raspidac3_ops, ++ .init = snd_rpi_raspidac3_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_raspidac3 = { ++ .name = "RaspiDAC Rev.3x HiFi Audio Card", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_raspidac3_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai), ++}; ++ ++/* sound card test */ ++static int snd_rpi_raspidac3_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_raspidac3.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_raspidac3); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++/* sound card disconnect */ ++static int snd_rpi_raspidac3_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_raspidac3); ++} ++ ++static const struct of_device_id raspidac3_of_match[] = { ++ { .compatible = "jg,raspidacv3", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, raspidac3_of_match); ++ ++/* sound card platform driver */ ++static struct platform_driver snd_rpi_raspidac3_driver = { ++ .driver = { ++ .name = "snd-rpi-raspidac3", ++ .owner = THIS_MODULE, ++ .of_match_table = raspidac3_of_match, ++ }, ++ .probe = snd_rpi_raspidac3_probe, ++ .remove = snd_rpi_raspidac3_remove, ++}; ++ ++module_platform_driver(snd_rpi_raspidac3_driver); ++ ++MODULE_AUTHOR("Jan Grulich "); ++MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1076_0dca82706bf0033600840a4af5bef873dd73c2aa.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1076_0dca82706bf0033600840a4af5bef873dd73c2aa.patch --- linux-4.9.13/debian/patches/rpi/rpi_1076_0dca82706bf0033600840a4af5bef873dd73c2aa.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1076_0dca82706bf0033600840a4af5bef873dd73c2aa.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,449 @@ +commit 0dca82706bf0033600840a4af5bef873dd73c2aa +Author: Aaron Shaw +Date: Thu Apr 7 21:26:21 2016 +0100 + + Add Support for JustBoom Audio boards + + justboom-dac: Adjust for ALSA API change + + As of 4.4, snd_soc_limit_volume now takes a struct snd_soc_card * + rather than a struct snd_soc_codec *. + + Signed-off-by: Phil Elwell + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index a2e74be19fa7..1130c52314ec 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -59,6 +59,20 @@ config SND_BCM2708_SOC_RPI_PROTO + help + Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). + ++config SND_BCM2708_SOC_JUSTBOOM_DAC ++ tristate "Support for JustBoom DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x ++ help ++ Say Y or M if you want to add support for JustBoom DAC. ++ ++config SND_BCM2708_SOC_JUSTBOOM_DIGI ++ tristate "Support for JustBoom Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for JustBoom Digi. ++ + config SND_BCM2708_SOC_IQAUDIO_DAC + tristate "Support for IQaudIO-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index c07879810681..94f5a29386d4 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -13,6 +13,8 @@ snd-soc-hifiberry-amp-objs := hifiberry_amp.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o ++snd-soc-justboom-dac-objs := justboom-dac.o ++snd-soc-justboom-digi-objs := justboom-digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o +@@ -22,6 +24,8 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o ++obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +diff --git a/sound/soc/bcm/justboom-dac.c b/sound/soc/bcm/justboom-dac.c +new file mode 100644 +index 000000000000..8fd50dbe6815 +--- /dev/null ++++ b/sound/soc/bcm/justboom-dac.c +@@ -0,0 +1,162 @@ ++/* ++ * ASoC Driver for JustBoom DAC Raspberry Pi HAT Sound Card ++ * ++ * Author: Milan Neskovic ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_rpi_justboom_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_justboom_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ /*return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);*/ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++static int snd_rpi_justboom_dac_startup(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ return 0; ++} ++ ++static void snd_rpi_justboom_dac_shutdown(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_justboom_dac_ops = { ++ .hw_params = snd_rpi_justboom_dac_hw_params, ++ .startup = snd_rpi_justboom_dac_startup, ++ .shutdown = snd_rpi_justboom_dac_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_justboom_dac_dai[] = { ++{ ++ .name = "JustBoom DAC", ++ .stream_name = "JustBoom DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_justboom_dac_ops, ++ .init = snd_rpi_justboom_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_justboom_dac = { ++ .name = "snd_rpi_justboom_dac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_justboom_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), ++}; ++ ++static int snd_rpi_justboom_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_justboom_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_justboom_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "justboom,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_justboom_dac); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_justboom_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_justboom_dac); ++} ++ ++static const struct of_device_id snd_rpi_justboom_dac_of_match[] = { ++ { .compatible = "justboom,justboom-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_justboom_dac_of_match); ++ ++static struct platform_driver snd_rpi_justboom_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-justboom-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_justboom_dac_of_match, ++ }, ++ .probe = snd_rpi_justboom_dac_probe, ++ .remove = snd_rpi_justboom_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_justboom_dac_driver); ++ ++MODULE_AUTHOR("Milan Neskovic "); ++MODULE_DESCRIPTION("ASoC Driver for JustBoom PI DAC HAT Sound Card"); ++MODULE_LICENSE("GPL v2"); +diff --git a/sound/soc/bcm/justboom-digi.c b/sound/soc/bcm/justboom-digi.c +new file mode 100644 +index 000000000000..91acb666380f +--- /dev/null ++++ b/sound/soc/bcm/justboom-digi.c +@@ -0,0 +1,215 @@ ++/* ++ * ASoC Driver for JustBoom Raspberry Pi Digi HAT Sound Card ++ * ++ * Author: Milan Neskovic ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static int snd_rpi_justboom_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ return 0; ++} ++ ++static int snd_rpi_justboom_digi_startup(struct snd_pcm_substream *substream) { ++ /* turn on digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ return 0; ++} ++ ++static void snd_rpi_justboom_digi_shutdown(struct snd_pcm_substream *substream) { ++ /* turn off output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++} ++ ++static int snd_rpi_justboom_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq=0; ++ int mclk_div=1; ++ int sampling_freq=1; ++ ++ int ret; ++ ++ int samplerate = params_rate(params); ++ ++ if (samplerate<=96000) { ++ mclk_freq=samplerate*256; ++ mclk_div=WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq=samplerate*128; ++ mclk_div=WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq=0x03; ++ break; ++ case 44100: ++ sampling_freq=0x00; ++ break; ++ case 48000: ++ sampling_freq=0x02; ++ break; ++ case 88200: ++ sampling_freq=0x08; ++ break; ++ case 96000: ++ sampling_freq=0x0a; ++ break; ++ case 176400: ++ sampling_freq=0x0c; ++ break; ++ case 192000: ++ sampling_freq=0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_justboom_digi_ops = { ++ .hw_params = snd_rpi_justboom_digi_hw_params, ++ .startup = snd_rpi_justboom_digi_startup, ++ .shutdown = snd_rpi_justboom_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_justboom_digi_dai[] = { ++{ ++ .name = "JustBoom Digi", ++ .stream_name = "JustBoom Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_justboom_digi_ops, ++ .init = snd_rpi_justboom_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_justboom_digi = { ++ .name = "snd_rpi_justboom_digi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_justboom_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), ++}; ++ ++static int snd_rpi_justboom_digi_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_justboom_digi.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_justboom_digi_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_justboom_digi); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_justboom_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_justboom_digi); ++} ++ ++static const struct of_device_id snd_rpi_justboom_digi_of_match[] = { ++ { .compatible = "justboom,justboom-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_justboom_digi_of_match); ++ ++static struct platform_driver snd_rpi_justboom_digi_driver = { ++ .driver = { ++ .name = "snd-rpi-justboom-digi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_justboom_digi_of_match, ++ }, ++ .probe = snd_rpi_justboom_digi_probe, ++ .remove = snd_rpi_justboom_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_justboom_digi_driver); ++ ++MODULE_AUTHOR("Milan Neskovic "); ++MODULE_DESCRIPTION("ASoC Driver for JustBoom PI Digi HAT Sound Card"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1077_3fecf635a05caac22d10197ef5fe58c0bacaeffb.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1077_3fecf635a05caac22d10197ef5fe58c0bacaeffb.patch --- linux-4.9.13/debian/patches/rpi/rpi_1077_3fecf635a05caac22d10197ef5fe58c0bacaeffb.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1077_3fecf635a05caac22d10197ef5fe58c0bacaeffb.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,178 @@ +commit 3fecf635a05caac22d10197ef5fe58c0bacaeffb +Author: Andrey Grodzovsky +Date: Tue May 3 22:10:59 2016 -0400 + + ARM: adau1977-adc: Add basic machine driver for adau1977 codec driver. + + This commit adds basic support for the codec usage including: Device tree overlay, + binding I2S bus and setting I2S mode, clock source and frequency setting according + to spec. + + Signed-off-by: Andrey Grodzovsky + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 1130c52314ec..0dbeea9227ec 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -87,3 +87,10 @@ config SND_BCM2708_SOC_RASPIDAC3 + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for RaspiDAC Rev.3x. ++ ++config SND_BCM2708_SOC_ADAU1977_ADC ++ tristate "Support for ADAU1977 ADC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_ADAU1977_I2C ++ help ++ Say Y or M if you want to add support for ADAU1977 ADC. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 94f5a29386d4..8c20ce506f2b 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -9,6 +9,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygnus-ssp.o + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support ++snd-soc-adau1977-adc-objs := adau1977-adc.o + snd-soc-hifiberry-amp-objs := hifiberry_amp.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o +@@ -20,6 +21,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-raspidac3-objs := raspidac3.o + ++obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o +diff --git a/sound/soc/bcm/adau1977-adc.c b/sound/soc/bcm/adau1977-adc.c +new file mode 100644 +index 000000000000..6e2ee027926e +--- /dev/null ++++ b/sound/soc/bcm/adau1977-adc.c +@@ -0,0 +1,125 @@ ++/* ++ * ASoC Driver for ADAU1977 ADC ++ * ++ * Author: Andrey Grodzovsky ++ * Copyright 2016 ++ * ++ * This file is based on hifibery_dac driver by Florian Meier. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++enum adau1977_clk_id { ++ ADAU1977_SYSCLK, ++}; ++ ++enum adau1977_sysclk_src { ++ ADAU1977_SYSCLK_SRC_MCLK, ++ ADAU1977_SYSCLK_SRC_LRCLK, ++}; ++ ++static int eval_adau1977_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ int ret; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 0); ++ if (ret < 0) ++ return ret; ++ ++ return snd_soc_codec_set_sysclk(rtd->codec, ADAU1977_SYSCLK, ++ ADAU1977_SYSCLK_SRC_MCLK, 11289600, SND_SOC_CLOCK_IN); ++} ++ ++static struct snd_soc_dai_link snd_rpi_adau1977_dai[] = { ++ { ++ .name = "adau1977", ++ .stream_name = "ADAU1977", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "adau1977-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "adau1977.1-0011", ++ .init = eval_adau1977_init, ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ }, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_adau1977_adc = { ++ .name = "snd_rpi_adau1977_adc", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_adau1977_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_adau1977_dai), ++}; ++ ++static int snd_adau1977_adc_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_adau1977_adc.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_adau1977_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_adau1977_adc); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_adau1977_adc_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_adau1977_adc); ++} ++ ++static const struct of_device_id snd_adau1977_adc_of_match[] = { ++ { .compatible = "adi,adau1977-adc", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, snd_adau1977_adc_of_match); ++ ++static struct platform_driver snd_adau1977_adc_driver = { ++ .driver = { ++ .name = "snd-adau1977-adc", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_adau1977_adc_of_match, ++ }, ++ .probe = snd_adau1977_adc_probe, ++ .remove = snd_adau1977_adc_remove, ++}; ++ ++module_platform_driver(snd_adau1977_adc_driver); ++ ++MODULE_AUTHOR("Andrey Grodzovsky "); ++MODULE_DESCRIPTION("ASoC Driver for ADAU1977 ADC"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1078_ef981e640ac606947bd6b47b53ea5c0e9cd72148.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1078_ef981e640ac606947bd6b47b53ea5c0e9cd72148.patch --- linux-4.9.13/debian/patches/rpi/rpi_1078_ef981e640ac606947bd6b47b53ea5c0e9cd72148.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1078_ef981e640ac606947bd6b47b53ea5c0e9cd72148.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,247 @@ +commit ef981e640ac606947bd6b47b53ea5c0e9cd72148 +Author: Matt Flax +Date: Mon May 16 21:36:31 2016 +1000 + + New AudioInjector.net Pi soundcard with low jitter audio in and out. + + Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile. + Adds the dts overlay and updates the Makefile and README. + Updates the relevant defconfig files to enable building for the Raspberry Pi. + Thanks to Phil Elwell (pelwell) for the review, simple-card concepts and discussion. Thanks to Clive Messer for overlay naming suggestions. + + Added support for headphones, microphone and bclk_ratio settings. + + This patch adds headphone and microphone capability to the Audio Injector sound card. The patch also sets the bit clock ratio for use in the bcm2835-i2s driver. The bcm2835-i2s can't handle an 8 kHz sample rate when the bit clock is at 12 MHz because its register is only 10 bits wide which can't represent the ch2 offset of 1508. For that reason, the rate constraint is added. + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 0dbeea9227ec..0ebfea3c1cbb 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -94,3 +94,10 @@ config SND_BCM2708_SOC_ADAU1977_ADC + select SND_SOC_ADAU1977_I2C + help + Say Y or M if you want to add support for ADAU1977 ADC. ++ ++config SND_AUDIOINJECTOR_PI_SOUNDCARD ++ tristate "Support for audioinjector.net Pi add on soundcard" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8731 ++ help ++ Say Y or M if you want to add support for audioinjector.net Pi Hat +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 8c20ce506f2b..4d4189b6d0c5 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -20,6 +20,7 @@ snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-raspidac3-objs := raspidac3.o ++snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -32,3 +33,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o ++obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o ++ +diff --git a/sound/soc/bcm/audioinjector-pi-soundcard.c b/sound/soc/bcm/audioinjector-pi-soundcard.c +new file mode 100644 +index 000000000000..ef54e0f07ea0 +--- /dev/null ++++ b/sound/soc/bcm/audioinjector-pi-soundcard.c +@@ -0,0 +1,193 @@ ++/* ++ * ASoC Driver for AudioInjector Pi add on soundcard ++ * ++ * Created on: 13-May-2016 ++ * Author: flatmax@flatmax.org ++ * based on code by Cliff Cai for the ssm2602 machine blackfin. ++ * with help from Lars-Peter Clausen for simplifying the original code to use the dai_fmt field. ++ * i2s_node code taken from the other sound/soc/bcm machine drivers. ++ * ++ * Copyright (C) 2016 Flatmax Pty. Ltd. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8731.h" ++ ++static const unsigned int bcm2835_rates_12000000[] = { ++ 8000, 16000, 32000, 44100, 48000, 96000, 88200, ++}; ++ ++static struct snd_pcm_hw_constraint_list bcm2835_constraints_12000000 = { ++ .list = bcm2835_rates_12000000, ++ .count = ARRAY_SIZE(bcm2835_rates_12000000), ++}; ++ ++static int snd_audioinjector_pi_soundcard_startup(struct snd_pcm_substream *substream) ++{ ++ /* Setup constraints, because there is a 12 MHz XTAL on the board */ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &bcm2835_constraints_12000000); ++ return 0; ++} ++ ++static int snd_audioinjector_pi_soundcard_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ switch (params_rate(params)){ ++ case 8000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 1); ++ case 16000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 750); ++ case 32000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 375); ++ case 44100: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 272); ++ case 48000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 250); ++ case 88200: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 136); ++ case 96000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); ++ default: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); ++ } ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_audioinjector_pi_soundcard_ops = { ++ .startup = snd_audioinjector_pi_soundcard_startup, ++ .hw_params = snd_audioinjector_pi_soundcard_hw_params, ++}; ++ ++static int audioinjector_pi_soundcard_dai_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return snd_soc_dai_set_sysclk(rtd->codec_dai, WM8731_SYSCLK_XTAL, 12000000, SND_SOC_CLOCK_IN); ++} ++ ++static struct snd_soc_dai_link audioinjector_pi_soundcard_dai[] = { ++ { ++ .name = "AudioInjector audio", ++ .stream_name = "AudioInjector audio", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8731-hifi", ++ .platform_name = "bcm2835-i2s.0", ++ .codec_name = "wm8731.1-001a", ++ .ops = &snd_audioinjector_pi_soundcard_ops, ++ .init = audioinjector_pi_soundcard_dai_init, ++ .dai_fmt = SND_SOC_DAIFMT_CBM_CFM|SND_SOC_DAIFMT_I2S|SND_SOC_DAIFMT_NB_NF, ++ }, ++}; ++ ++static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headphone Jack", NULL), ++ SND_SOC_DAPM_SPK("Ext Spk", NULL), ++ SND_SOC_DAPM_LINE("Line In Jacks", NULL), ++ SND_SOC_DAPM_MIC("Microphone", NULL), ++}; ++ ++static const struct snd_soc_dapm_route audioinjector_audio_map[] = { ++ /* headphone connected to LHPOUT, RHPOUT */ ++ {"Headphone Jack", NULL, "LHPOUT"}, ++ {"Headphone Jack", NULL, "RHPOUT"}, ++ ++ /* speaker connected to LOUT, ROUT */ ++ {"Ext Spk", NULL, "ROUT"}, ++ {"Ext Spk", NULL, "LOUT"}, ++ ++ /* line inputs */ ++ {"Line In Jacks", NULL, "Line Input"}, ++ ++ /* mic is connected to Mic Jack, with WM8731 Mic Bias */ ++ {"Microphone", NULL, "Mic Bias"}, ++}; ++ ++static struct snd_soc_card snd_soc_audioinjector = { ++ .name = "audioinjector-pi-soundcard", ++ .dai_link = audioinjector_pi_soundcard_dai, ++ .num_links = ARRAY_SIZE(audioinjector_pi_soundcard_dai), ++ ++ .dapm_widgets = wm8731_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), ++ .dapm_routes = audioinjector_audio_map, ++ .num_dapm_routes = ARRAY_SIZE(audioinjector_audio_map), ++}; ++ ++static int audioinjector_pi_soundcard_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = &snd_soc_audioinjector; ++ int ret; ++ ++ card->dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct snd_soc_dai_link *dai = &audioinjector_pi_soundcard_dai[0]; ++ struct device_node *i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } else ++ if (!dai->cpu_of_node) { ++ dev_err(&pdev->dev, "Property 'i2s-controller' missing or invalid\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if ((ret = snd_soc_register_card(card))) { ++ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); ++ } ++ return ret; ++} ++ ++static int audioinjector_pi_soundcard_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = platform_get_drvdata(pdev); ++ return snd_soc_unregister_card(card); ++ ++} ++ ++static const struct of_device_id audioinjector_pi_soundcard_of_match[] = { ++ { .compatible = "ai,audioinjector-pi-soundcard", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, audioinjector_pi_soundcard_of_match); ++ ++static struct platform_driver audioinjector_pi_soundcard_driver = { ++ .driver = { ++ .name = "audioinjector-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = audioinjector_pi_soundcard_of_match, ++ }, ++ .probe = audioinjector_pi_soundcard_probe, ++ .remove = audioinjector_pi_soundcard_remove, ++}; ++ ++module_platform_driver(audioinjector_pi_soundcard_driver); ++MODULE_AUTHOR("Matt Flax "); ++MODULE_DESCRIPTION("AudioInjector.net Pi Soundcard"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:audioinjector-pi-soundcard"); ++ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1079_5b172d8701fbad31d866e3732bda728857b289dc.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1079_5b172d8701fbad31d866e3732bda728857b289dc.patch --- linux-4.9.13/debian/patches/rpi/rpi_1079_5b172d8701fbad31d866e3732bda728857b289dc.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1079_5b172d8701fbad31d866e3732bda728857b289dc.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,297 @@ +commit 5b172d8701fbad31d866e3732bda728857b289dc +Author: DigitalDreamtime +Date: Thu Jun 30 18:38:42 2016 +0100 + + Add IQAudIO Digi WM8804 board support + + Support IQAudIO Digi board with iqaudio_digi machine driver and + iqaudio-digi-wm8804-audio overlay. + + NB. Machine driver is a cut and paste of hifiberry_digi code, with format + and general cleanup to comply with kernel coding standards. + + Signed-off-by: DigitalDreamtime + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 0ebfea3c1cbb..24723d09e7bd 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -80,6 +80,13 @@ config SND_BCM2708_SOC_IQAUDIO_DAC + help + Say Y or M if you want to add support for IQaudIO-DAC. + ++config SND_BCM2708_SOC_IQAUDIO_DIGI ++ tristate "Support for IQAudIO Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for IQAudIO Digital IO board. ++ + config SND_BCM2708_SOC_RASPIDAC3 + tristate "Support for RaspiDAC Rev.3x" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 4d4189b6d0c5..ee41d6bbdbbd 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -19,6 +19,7 @@ snd-soc-justboom-digi-objs := justboom-digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o ++snd-soc-iqaudio-digi-objs := iqaudio_digi.o + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + +@@ -32,6 +33,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + +diff --git a/sound/soc/bcm/iqaudio_digi.c b/sound/soc/bcm/iqaudio_digi.c +new file mode 100644 +index 000000000000..9b6e829bcb5b +--- /dev/null ++++ b/sound/soc/bcm/iqaudio_digi.c +@@ -0,0 +1,239 @@ ++/* ++ * ASoC Driver for IQAudIO WM8804 Digi ++ * ++ * Author: Daniel Matuschek ++ * based on the HifiBerry DAC driver by Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static short int auto_shutdown_output; ++module_param(auto_shutdown_output, short, ++ S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); ++ ++static int snd_rpi_iqaudio_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_digi_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* turn on digital output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ ++ return 0; ++} ++ ++static void snd_rpi_iqaudio_digi_shutdown(struct snd_pcm_substream *substream) ++{ ++ if (auto_shutdown_output) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* turn off digital output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++ } ++} ++ ++ ++static int snd_rpi_iqaudio_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq = 0; ++ int mclk_div = 1; ++ int sampling_freq = 1; ++ ++ int ret; ++ ++ int samplerate = params_rate(params); ++ ++ if (samplerate <= 96000) { ++ mclk_freq = samplerate * 256; ++ mclk_div = WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq = samplerate * 128; ++ mclk_div = WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq = 0x03; ++ break; ++ case 44100: ++ sampling_freq = 0x00; ++ break; ++ case 48000: ++ sampling_freq = 0x02; ++ break; ++ case 88200: ++ sampling_freq = 0x08; ++ break; ++ case 96000: ++ sampling_freq = 0x0a; ++ break; ++ case 176400: ++ sampling_freq = 0x0c; ++ break; ++ case 192000: ++ sampling_freq = 0x0e; ++ break; ++ default: ++ dev_err(codec->dev, "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_iqaudio_digi_ops = { ++ .hw_params = snd_rpi_iqaudio_digi_hw_params, ++ .startup = snd_rpi_iqaudio_digi_startup, ++ .shutdown = snd_rpi_iqaudio_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_iqaudio_digi_dai[] = { ++{ ++ .name = "IQAudIO Digi", ++ .stream_name = "IQAudIO Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_iqaudio_digi_ops, ++ .init = snd_rpi_iqaudio_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_iqaudio_digi = { ++ .name = "IQAudIODigi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_iqaudio_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_digi_dai), ++}; ++ ++static int snd_rpi_iqaudio_digi_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = &snd_rpi_iqaudio_digi; ++ char *prefix = "wm8804-digi,"; ++ char prop[128]; ++ struct device_node *np; ++ int ret = 0; ++ ++ snd_rpi_iqaudio_digi.dev = &pdev->dev; ++ ++ np = pdev->dev.of_node; ++ if (np) { ++ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_digi_dai[0]; ++ struct device_node *i2s_node; ++ ++ i2s_node = of_parse_phandle(np, "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ snprintf(prop, sizeof(prop), "%scard-name", prefix); ++ of_property_read_string(np, prop, &card->name); ++ ++ snprintf(prop, sizeof(prop), "%sdai-name", prefix); ++ of_property_read_string(np, prop, &dai->name); ++ ++ snprintf(prop, sizeof(prop), "%sdai-stream-name", prefix); ++ of_property_read_string(np, prop, &dai->stream_name); ++ } ++ ++ ret = snd_soc_register_card(card); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_iqaudio_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_iqaudio_digi); ++} ++ ++static const struct of_device_id snd_rpi_iqaudio_digi_of_match[] = { ++ { .compatible = "iqaudio,wm8804-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_iqaudio_digi_of_match); ++ ++static struct platform_driver snd_rpi_iqaudio_digi_driver = { ++ .driver = { ++ .name = "IQAudIODigi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_iqaudio_digi_of_match, ++ }, ++ .probe = snd_rpi_iqaudio_digi_probe, ++ .remove = snd_rpi_iqaudio_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_iqaudio_digi_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for IQAudIO WM8804 Digi"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1080_604e48847133f98ecfef3763dead1c4fb416163f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1080_604e48847133f98ecfef3763dead1c4fb416163f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1080_604e48847133f98ecfef3763dead1c4fb416163f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1080_604e48847133f98ecfef3763dead1c4fb416163f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,468 @@ +commit 604e48847133f98ecfef3763dead1c4fb416163f +Author: escalator2015 +Date: Tue May 24 16:20:09 2016 +0100 + + New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 24723d09e7bd..c432ef568823 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -108,3 +108,11 @@ config SND_AUDIOINJECTOR_PI_SOUNDCARD + select SND_SOC_WM8731 + help + Say Y or M if you want to add support for audioinjector.net Pi Hat ++ ++config SND_DIGIDAC1_SOUNDCARD ++ tristate "Support for Red Rocks Audio DigiDAC1" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ select SND_SOC_WM8741 ++ help ++ Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index ee41d6bbdbbd..855f4dbe574f 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -22,6 +22,7 @@ snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-iqaudio-digi-objs := iqaudio_digi.o + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o ++snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -36,4 +37,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o ++obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + +diff --git a/sound/soc/bcm/digidac1-soundcard.c b/sound/soc/bcm/digidac1-soundcard.c +new file mode 100644 +index 000000000000..446796e7e4c1 +--- /dev/null ++++ b/sound/soc/bcm/digidac1-soundcard.c +@@ -0,0 +1,422 @@ ++/* ++ * ASoC Driver for RRA DigiDAC1 ++ * Copyright 2016 ++ * Author: José M. Tasende ++ * based on the HifiBerry DAC driver by Florian Meier ++ * and the Wolfson card driver by Nikesh Oswal, ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++#include "../codecs/wm8741.h" ++ ++#define WM8741_NUM_SUPPLIES 2 ++ ++/* codec private data */ ++struct wm8741_priv { ++ struct wm8741_platform_data pdata; ++ struct regmap *regmap; ++ struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; ++ unsigned int sysclk; ++ const struct snd_pcm_hw_constraint_list *sysclk_constraints; ++}; ++ ++static int samplerate = 44100; ++ ++/* New Alsa Controls not exposed by original wm8741 codec driver */ ++/* in actual driver the att. adjustment is wrong because */ ++/* this DAC has a coarse attenuation register with 4dB steps */ ++/* and a fine level register with 0.125dB steps */ ++/* each register has 32 steps so combining both we have 1024 steps */ ++/* of 0.125 dB. */ ++/* The original level controls from driver are removed at startup */ ++/* and replaced by the corrected ones. */ ++/* The same wm8741 driver can be used for wm8741 and wm8742 devices */ ++ ++static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, 0, 13, 0); ++static const DECLARE_TLV_DB_SCALE(dac_tlv_coarse, -12700, 400, 1); ++static const char *w8741_dither[4] = {"Off", "RPDF", "TPDF", "HPDF"}; ++static const char *w8741_filter[5] = { ++ "Type 1", "Type 2", "Type 3", "Type 4", "Type 5"}; ++static const char *w8741_switch[2] = {"Off", "On"}; ++static const struct soc_enum w8741_enum[] = { ++SOC_ENUM_SINGLE(WM8741_MODE_CONTROL_2, 0, 4, w8741_dither),/* dithering type */ ++SOC_ENUM_SINGLE(WM8741_FILTER_CONTROL, 0, 5, w8741_filter),/* filter type */ ++SOC_ENUM_SINGLE(WM8741_FORMAT_CONTROL, 6, 2, w8741_switch),/* phase invert */ ++SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 0, 2, w8741_switch),/* volume ramp */ ++SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 3, 2, w8741_switch),/* soft mute */ ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_stereo[] = { ++SOC_DOUBLE_R_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, ++ WM8741_DACRLSB_ATTENUATION, 0, 31, 1, dac_tlv_fine), ++SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, ++ WM8741_DACRMSB_ATTENUATION, 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_mono_left[] = { ++SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, ++ 0, 31, 0, dac_tlv_fine), ++SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, ++ 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_mono_right[] = { ++SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACRLSB_ATTENUATION, ++ 0, 31, 0, dac_tlv_fine), ++SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACRMSB_ATTENUATION, ++ 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static int w8741_add_controls(struct snd_soc_codec *codec) ++{ ++ struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); ++ ++ switch (wm8741->pdata.diff_mode) { ++ case WM8741_DIFF_MODE_STEREO: ++ case WM8741_DIFF_MODE_STEREO_REVERSED: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_stereo, ++ ARRAY_SIZE(w8741_snd_controls_stereo)); ++ break; ++ case WM8741_DIFF_MODE_MONO_LEFT: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_mono_left, ++ ARRAY_SIZE(w8741_snd_controls_mono_left)); ++ break; ++ case WM8741_DIFF_MODE_MONO_RIGHT: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_mono_right, ++ ARRAY_SIZE(w8741_snd_controls_mono_right)); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int digidac1_soundcard_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ struct snd_card *sound_card = card->snd_card; ++ struct snd_kcontrol *kctl; ++ int ret; ++ ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_init: couldn't get wm8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ ret = w8741_add_controls(wm8741_codec); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to add new wm8741 controls: %d\n", ++ ret); ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ kctl = snd_soc_card_get_kcontrol(card, ++ "Playback Volume"); ++ if (kctl) { ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ snd_ctl_remove(sound_card, kctl); ++ } ++ kctl = snd_soc_card_get_kcontrol(card, ++ "Fine Playback Volume"); ++ if (kctl) { ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ snd_ctl_remove(sound_card, kctl); ++ } ++ return 0; ++} ++ ++static int digidac1_soundcard_startup(struct snd_pcm_substream *substream) ++{ ++ /* turn on wm8804 digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_startup: couldn't get WM8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ ++ /* latch wm8741 level */ ++ snd_soc_update_bits(wm8741_codec, WM8741_DACLLSB_ATTENUATION, ++ WM8741_UPDATELL, WM8741_UPDATELL); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACLMSB_ATTENUATION, ++ WM8741_UPDATELM, WM8741_UPDATELM); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACRLSB_ATTENUATION, ++ WM8741_UPDATERL, WM8741_UPDATERL); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACRMSB_ATTENUATION, ++ WM8741_UPDATERM, WM8741_UPDATERM); ++ ++ return 0; ++} ++ ++static void digidac1_soundcard_shutdown(struct snd_pcm_substream *substream) ++{ ++ /* turn off wm8804 digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++} ++ ++static int digidac1_soundcard_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ ++ int sysclk = 27000000; ++ long mclk_freq = 0; ++ int mclk_div = 1; ++ int sampling_freq = 1; ++ int ret; ++ ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_hw_params: couldn't get WM8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ samplerate = params_rate(params); ++ ++ if (samplerate <= 96000) { ++ mclk_freq = samplerate*256; ++ mclk_div = WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq = samplerate*128; ++ mclk_div = WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq = 0x03; ++ break; ++ case 44100: ++ sampling_freq = 0x00; ++ break; ++ case 48000: ++ sampling_freq = 0x02; ++ break; ++ case 88200: ++ sampling_freq = 0x08; ++ break; ++ case 96000: ++ sampling_freq = 0x0a; ++ break; ++ case 176400: ++ sampling_freq = 0x0c; ++ break; ++ case 192000: ++ sampling_freq = 0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ /* Enable wm8804 TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* wm8804 Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* wm8804 set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ /* Now update wm8741 registers for the correct oversampling */ ++ if (samplerate <= 48000) ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x00); ++ else if (samplerate <= 96000) ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x20); ++ else ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x40); ++ ++ /* wm8741 bit size */ ++ switch (params_width(params)) { ++ case 16: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x00); ++ break; ++ case 20: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x01); ++ break; ++ case 24: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x02); ++ break; ++ case 32: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x03); ++ break; ++ default: ++ dev_dbg(codec->dev, "wm8741_hw_params: Unsupported bit size param = %d", ++ params_width(params)); ++ return -EINVAL; ++ } ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++/* machine stream operations */ ++static struct snd_soc_ops digidac1_soundcard_ops = { ++ .hw_params = digidac1_soundcard_hw_params, ++ .startup = digidac1_soundcard_startup, ++ .shutdown = digidac1_soundcard_shutdown, ++}; ++ ++static struct snd_soc_dai_link digidac1_soundcard_dai[] = { ++ { ++ .name = "RRA DigiDAC1", ++ .stream_name = "RRA DigiDAC1 HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &digidac1_soundcard_ops, ++ .init = digidac1_soundcard_init, ++ }, ++ { ++ .name = "RRA DigiDAC11", ++ .stream_name = "RRA DigiDAC11 HiFi", ++ .cpu_dai_name = "wm8804-spdif", ++ .codec_dai_name = "wm8741", ++ .codec_name = "wm8741.1-001a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBS_CFS, ++ }, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card digidac1_soundcard = { ++ .name = "digidac1-soundcard", ++ .owner = THIS_MODULE, ++ .dai_link = digidac1_soundcard_dai, ++ .num_links = ARRAY_SIZE(digidac1_soundcard_dai), ++}; ++ ++static int digidac1_soundcard_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ digidac1_soundcard.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &digidac1_soundcard_dai[0]; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&digidac1_soundcard); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int digidac1_soundcard_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&digidac1_soundcard); ++} ++ ++static const struct of_device_id digidac1_soundcard_of_match[] = { ++ { .compatible = "rra,digidac1-soundcard", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, digidac1_soundcard_of_match); ++ ++static struct platform_driver digidac1_soundcard_driver = { ++ .driver = { ++ .name = "digidac1-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = digidac1_soundcard_of_match, ++ }, ++ .probe = digidac1_soundcard_probe, ++ .remove = digidac1_soundcard_remove, ++}; ++ ++module_platform_driver(digidac1_soundcard_driver); ++ ++MODULE_AUTHOR("José M. Tasende "); ++MODULE_DESCRIPTION("ASoC Driver for RRA DigiDAC1"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1081_d59362b47b9960a5214628664ed7f238fd875590.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1081_d59362b47b9960a5214628664ed7f238fd875590.patch --- linux-4.9.13/debian/patches/rpi/rpi_1081_d59362b47b9960a5214628664ed7f238fd875590.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1081_d59362b47b9960a5214628664ed7f238fd875590.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,170 @@ +commit d59362b47b9960a5214628664ed7f238fd875590 +Author: DigitalDreamtime +Date: Sat Jul 2 16:26:19 2016 +0100 + + Add support for Dion Audio LOCO DAC-AMP HAT + + Using dedicated machine driver and pcm5102a codec driver. + + Signed-off-by: DigitalDreamtime + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index c432ef568823..668d163c3705 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -116,3 +116,10 @@ config SND_DIGIDAC1_SOUNDCARD + select SND_SOC_WM8741 + help + Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. ++ ++config SND_BCM2708_SOC_DIONAUDIO_LOCO ++ tristate "Support for Dion Audio LOCO DAC-AMP" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5102a ++ help ++ Say Y or M if you want to add support for Dion Audio LOCO. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 855f4dbe574f..fca9d682bbd2 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -23,6 +23,7 @@ snd-soc-iqaudio-digi-objs := iqaudio_digi.o + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o ++snd-soc-dionaudio-loco-objs := dionaudio_loco.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -38,4 +39,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o +- ++obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o +diff --git a/sound/soc/bcm/dionaudio_loco.c b/sound/soc/bcm/dionaudio_loco.c +new file mode 100644 +index 000000000000..89e65317512b +--- /dev/null ++++ b/sound/soc/bcm/dionaudio_loco.c +@@ -0,0 +1,121 @@ ++/* ++ * ASoC Driver for Dion Audio LOCO DAC-AMP ++ * ++ * Author: Miquel Blauw ++ * Copyright 2016 ++ * ++ * Based on the software of the RPi-DAC writen by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_dionaudio_loco_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_dionaudio_loco_ops = { ++ .hw_params = snd_rpi_dionaudio_loco_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_dionaudio_loco_dai[] = { ++{ ++ .name = "DionAudio LOCO", ++ .stream_name = "DionAudio LOCO DAC-AMP", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm5102a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm5102a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_dionaudio_loco_ops, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_dionaudio_loco = { ++ .name = "snd_rpi_dionaudio_loco", ++ .dai_link = snd_rpi_dionaudio_loco_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_dai), ++}; ++ ++static int snd_rpi_dionaudio_loco_probe(struct platform_device *pdev) ++{ ++ struct device_node *np; ++ int ret = 0; ++ ++ snd_rpi_dionaudio_loco.dev = &pdev->dev; ++ ++ np = pdev->dev.of_node; ++ if (np) { ++ struct snd_soc_dai_link *dai = &snd_rpi_dionaudio_loco_dai[0]; ++ struct device_node *i2s_np; ++ ++ i2s_np = of_parse_phandle(np, "i2s-controller", 0); ++ if (i2s_np) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_np; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_np; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_dionaudio_loco_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco); ++} ++ ++static const struct of_device_id snd_rpi_dionaudio_loco_of_match[] = { ++ { .compatible = "dionaudio,loco-pcm5242-tpa3118", }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_dionaudio_loco_of_match); ++ ++static struct platform_driver snd_rpi_dionaudio_loco_driver = { ++ .driver = { ++ .name = "snd-dionaudio-loco", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_dionaudio_loco_of_match, ++ }, ++ .probe = snd_rpi_dionaudio_loco_probe, ++ .remove = snd_rpi_dionaudio_loco_remove, ++}; ++ ++module_platform_driver(snd_rpi_dionaudio_loco_driver); ++ ++MODULE_AUTHOR("Miquel Blauw "); ++MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1082_9152aa6101077b3e30bcb7c9e374ccfb802b4a82.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1082_9152aa6101077b3e30bcb7c9e374ccfb802b4a82.patch --- linux-4.9.13/debian/patches/rpi/rpi_1082_9152aa6101077b3e30bcb7c9e374ccfb802b4a82.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1082_9152aa6101077b3e30bcb7c9e374ccfb802b4a82.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,203 @@ +commit 9152aa6101077b3e30bcb7c9e374ccfb802b4a82 +Author: Clive Messer +Date: Mon Sep 19 14:01:04 2016 +0100 + + Allo Piano DAC boards: Initial 2 channel (stereo) support (#1645) + + Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards, + using allo-piano-dac-pcm512x-audio overlay and allo-piano-dac ALSA ASoC + machine driver. + + NB. The initial support is 2 channel (stereo) ONLY! + (The Piano DAC 2.1 will only support 2 channel (stereo) left/right output, + pending an update to the upstream pcm512x codec driver, which will have + to be submitted via upstream. With the initial downstream support, + provided by this patch, the Piano DAC 2.1 subwoofer outputs will + not function.) + + Signed-off-by: Baswaraj K + Signed-off-by: Clive Messer + Tested-by: Clive Messer + +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 668d163c3705..4e83bd6b1703 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -123,3 +123,10 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO + select SND_SOC_PCM5102a + help + Say Y or M if you want to add support for Dion Audio LOCO. ++ ++config SND_BCM2708_SOC_ALLO_PIANO_DAC ++ tristate "Support for Allo Piano DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ help ++ Say Y or M if you want to add support for Allo Piano DAC. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index fca9d682bbd2..64f007f8ba38 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -24,6 +24,7 @@ snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o ++snd-soc-allo-piano-dac-objs := allo-piano-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -40,3 +41,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o ++obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o +diff --git a/sound/soc/bcm/allo-piano-dac.c b/sound/soc/bcm/allo-piano-dac.c +new file mode 100644 +index 000000000000..8e8e62e5a36a +--- /dev/null ++++ b/sound/soc/bcm/allo-piano-dac.c +@@ -0,0 +1,144 @@ ++/* ++ * ALSA ASoC Machine Driver for Allo Piano DAC ++ * ++ * Author: Baswaraj K ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_allo_piano_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", ++ 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ++ ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_allo_piano_dac_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_allo_piano_dac_ops = { ++ .hw_params = snd_allo_piano_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_allo_piano_dac_dai[] = { ++{ ++ .name = "Piano DAC", ++ .stream_name = "Piano DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_allo_piano_dac_ops, ++ .init = snd_allo_piano_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_allo_piano_dac = { ++ .name = "PianoDAC", ++ .owner = THIS_MODULE, ++ .dai_link = snd_allo_piano_dac_dai, ++ .num_links = ARRAY_SIZE(snd_allo_piano_dac_dai), ++}; ++ ++static int snd_allo_piano_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_allo_piano_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_allo_piano_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "allo,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_allo_piano_dac); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_allo_piano_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_allo_piano_dac); ++} ++ ++static const struct of_device_id snd_allo_piano_dac_of_match[] = { ++ { .compatible = "allo,piano-dac", }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, snd_allo_piano_dac_of_match); ++ ++static struct platform_driver snd_allo_piano_dac_driver = { ++ .driver = { ++ .name = "snd-allo-piano-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_allo_piano_dac_of_match, ++ }, ++ .probe = snd_allo_piano_dac_probe, ++ .remove = snd_allo_piano_dac_remove, ++}; ++ ++module_platform_driver(snd_allo_piano_dac_driver); ++ ++MODULE_AUTHOR("Baswaraj K "); ++MODULE_DESCRIPTION("ALSA ASoC Machine Driver for Allo Piano DAC"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1083_730f3336842e04f9e63636cdbcd7a5625f922b1b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1083_730f3336842e04f9e63636cdbcd7a5625f922b1b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1083_730f3336842e04f9e63636cdbcd7a5625f922b1b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1083_730f3336842e04f9e63636cdbcd7a5625f922b1b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1172 @@ +commit 730f3336842e04f9e63636cdbcd7a5625f922b1b +Author: gtrainavicius +Date: Sun Oct 23 12:06:53 2016 +0300 + + Support for Blokas Labs pisound board + + Pisound dynamic overlay (#1760) + + Restructuring pisound-overlay.dts, so it can be loaded and unloaded dynamically using dtoverlay. + + Print a logline when the kernel module is removed. + +diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt +index f0a48ea78659..779c19033aca 100644 +--- a/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -40,6 +40,7 @@ auvidea Auvidea GmbH + avago Avago Technologies + avic Shanghai AVIC Optoelectronics Co., Ltd. + axis Axis Communications AB ++blokaslabs Vilniaus Blokas UAB + boe BOE Technology Group Co., Ltd. + bosch Bosch Sensortec GmbH + boundary Boundary Devices Inc. +diff --git a/arch/arm/boot/dts/overlays/pisound-overlay.dts b/arch/arm/boot/dts/overlays/pisound-overlay.dts +index 7cdfc29ba4fb..5197e656a3d7 100644 +--- a/arch/arm/boot/dts/overlays/pisound-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -26,6 +26,54 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pisound_spi: pisound_spi@0{ ++ compatible = "blokaslabs,pisound-spi"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ spi-max-frequency = <1000000>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@5 { + target = <&sound>; + __overlay__ { + compatible = "blokaslabs,pisound"; +@@ -49,7 +97,7 @@ + }; + }; + +- fragment@1 { ++ fragment@6 { + target = <&gpio>; + __overlay__ { + pinctrl-names = "default"; +@@ -63,52 +111,10 @@ + }; + }; + +- fragment@2 { ++ fragment@7 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; +- +- fragment@3 { +- target-path = "/"; +- __overlay__ { +- pcm5102a-codec { +- #sound-dai-cells = <0>; +- compatible = "ti,pcm5102a"; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@4 { +- target = <&spi0>; +- __overlay__ { +- status = "okay"; +- +- spidev@0{ +- status = "disabled"; +- }; +- +- spidev@1{ +- status = "okay"; +- }; +- }; +- }; +- +- fragment@5 { +- target = <&spi0>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pisound_spi: pisound_spi@0{ +- compatible = "blokaslabs,pisound-spi"; +- reg = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins>; +- spi-max-frequency = <1000000>; +- }; +- }; +- }; + }; +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 4e83bd6b1703..d024377e8450 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -130,3 +130,9 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC + select SND_SOC_PCM512x_I2C + help + Say Y or M if you want to add support for Allo Piano DAC. ++ ++config SND_PISOUND ++ tristate "Support for Blokas Labs pisound" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ help ++ Say Y or M if you want to add support for Blokas Labs pisound. +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 64f007f8ba38..bb1df4385401 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -25,6 +25,7 @@ snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o ++snd-soc-pisound-objs := pisound.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -42,3 +43,4 @@ obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundca + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o ++obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o +diff --git a/sound/soc/bcm/pisound.c b/sound/soc/bcm/pisound.c +new file mode 100644 +index 000000000000..4b8545487d06 +--- /dev/null ++++ b/sound/soc/bcm/pisound.c +@@ -0,0 +1,989 @@ ++/* ++ * pisound Linux kernel module. ++ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; version 2 of the ++ * License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static int pisnd_spi_init(struct device *dev); ++static void pisnd_spi_uninit(void); ++ ++static void pisnd_spi_send(uint8_t val); ++static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length); ++ ++typedef void (*pisnd_spi_recv_cb)(void *data); ++static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data); ++ ++static const char *pisnd_spi_get_serial(void); ++static const char *pisnd_spi_get_id(void); ++static const char *pisnd_spi_get_version(void); ++ ++static int pisnd_midi_init(struct snd_card *card); ++static void pisnd_midi_uninit(void); ++ ++#define PISOUND_LOG_PREFIX "pisound: " ++ ++#ifdef DEBUG ++# define printd(...) pr_alert(PISOUND_LOG_PREFIX __VA_ARGS__) ++#else ++# define printd(...) do {} while (0) ++#endif ++ ++#define printe(...) pr_err(PISOUND_LOG_PREFIX __VA_ARGS__) ++#define printi(...) pr_info(PISOUND_LOG_PREFIX __VA_ARGS__) ++ ++static int pisnd_output_open(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static int pisnd_output_close(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static void pisnd_output_trigger( ++ struct snd_rawmidi_substream *substream, ++ int up ++ ) ++{ ++ uint8_t data; ++ ++ if (!up) ++ return; ++ ++ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { ++ pisnd_spi_send(data); ++ snd_rawmidi_transmit_ack(substream, 1); ++ } ++} ++ ++static void pisnd_output_drain(struct snd_rawmidi_substream *substream) ++{ ++ uint8_t data; ++ ++ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { ++ pisnd_spi_send(data); ++ ++ snd_rawmidi_transmit_ack(substream, 1); ++ } ++} ++ ++static int pisnd_input_open(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static int pisnd_input_close(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static void pisnd_midi_recv_callback(void *substream) ++{ ++ uint8_t data[128]; ++ uint8_t n = 0; ++ ++ while ((n = pisnd_spi_recv(data, sizeof(data)))) { ++ int res = snd_rawmidi_receive(substream, data, n); ++ (void)res; ++ printd("midi recv 0x%02x, res = %d\n", data, res); ++ } ++} ++ ++static void pisnd_input_trigger(struct snd_rawmidi_substream *substream, int up) ++{ ++ if (up) { ++ pisnd_spi_set_callback(pisnd_midi_recv_callback, substream); ++ pisnd_midi_recv_callback(substream); ++ } else { ++ pisnd_spi_set_callback(NULL, NULL); ++ } ++} ++ ++static struct snd_rawmidi *g_rmidi; ++ ++static struct snd_rawmidi_ops pisnd_output_ops = { ++ .open = pisnd_output_open, ++ .close = pisnd_output_close, ++ .trigger = pisnd_output_trigger, ++ .drain = pisnd_output_drain, ++}; ++ ++static struct snd_rawmidi_ops pisnd_input_ops = { ++ .open = pisnd_input_open, ++ .close = pisnd_input_close, ++ .trigger = pisnd_input_trigger, ++}; ++ ++static void pisnd_get_port_info( ++ struct snd_rawmidi *rmidi, ++ int number, ++ struct snd_seq_port_info *seq_port_info ++ ) ++{ ++ seq_port_info->type = ++ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | ++ SNDRV_SEQ_PORT_TYPE_HARDWARE | ++ SNDRV_SEQ_PORT_TYPE_PORT; ++ seq_port_info->midi_voices = 0; ++} ++ ++static struct snd_rawmidi_global_ops pisnd_global_ops = { ++ .get_port_info = pisnd_get_port_info, ++}; ++ ++static int pisnd_midi_init(struct snd_card *card) ++{ ++ int err = snd_rawmidi_new(card, "pisound MIDI", 0, 1, 1, &g_rmidi); ++ ++ if (err < 0) { ++ printe("snd_rawmidi_new failed: %d\n", err); ++ return err; ++ } ++ ++ strcpy(g_rmidi->name, "pisound MIDI "); ++ strcat(g_rmidi->name, pisnd_spi_get_serial()); ++ ++ g_rmidi->info_flags = ++ SNDRV_RAWMIDI_INFO_OUTPUT | ++ SNDRV_RAWMIDI_INFO_INPUT | ++ SNDRV_RAWMIDI_INFO_DUPLEX; ++ ++ g_rmidi->ops = &pisnd_global_ops; ++ ++ g_rmidi->private_data = (void *)0; ++ ++ snd_rawmidi_set_ops( ++ g_rmidi, ++ SNDRV_RAWMIDI_STREAM_OUTPUT, ++ &pisnd_output_ops ++ ); ++ ++ snd_rawmidi_set_ops( ++ g_rmidi, ++ SNDRV_RAWMIDI_STREAM_INPUT, ++ &pisnd_input_ops ++ ); ++ ++ return 0; ++} ++ ++static void pisnd_midi_uninit(void) ++{ ++} ++ ++static void *g_recvData; ++static pisnd_spi_recv_cb g_recvCallback; ++ ++#define FIFO_SIZE 512 ++ ++static char g_serial_num[11]; ++static char g_id[25]; ++static char g_version[5]; ++ ++DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); ++DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); ++ ++static struct gpio_desc *data_available; ++static struct gpio_desc *spi_reset; ++ ++static struct spi_device *pisnd_spi_device; ++ ++static struct workqueue_struct *pisnd_workqueue; ++static struct work_struct pisnd_work_process; ++ ++static void pisnd_work_handler(struct work_struct *work); ++ ++static uint16_t spi_transfer16(uint16_t val); ++ ++static int pisnd_init_workqueues(void) ++{ ++ pisnd_workqueue = create_singlethread_workqueue("pisnd_workqueue"); ++ INIT_WORK(&pisnd_work_process, pisnd_work_handler); ++ ++ return 0; ++} ++ ++static void pisnd_uninit_workqueues(void) ++{ ++ flush_workqueue(pisnd_workqueue); ++ destroy_workqueue(pisnd_workqueue); ++ ++ pisnd_workqueue = NULL; ++} ++ ++static bool pisnd_spi_has_more(void) ++{ ++ return gpiod_get_value(data_available); ++} ++ ++enum task_e { ++ TASK_PROCESS = 0, ++}; ++ ++static void pisnd_schedule_process(enum task_e task) ++{ ++ if (pisnd_spi_device != NULL && ++ pisnd_workqueue != NULL && ++ !work_pending(&pisnd_work_process) ++ ) { ++ printd("schedule: has more = %d\n", pisnd_spi_has_more()); ++ if (task == TASK_PROCESS) ++ queue_work(pisnd_workqueue, &pisnd_work_process); ++ } ++} ++ ++static irqreturn_t data_available_interrupt_handler(int irq, void *dev_id) ++{ ++ if (irq == gpiod_to_irq(data_available) && pisnd_spi_has_more()) { ++ printd("schedule from irq\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static DEFINE_SPINLOCK(spilock); ++static unsigned long spilockflags; ++ ++static uint16_t spi_transfer16(uint16_t val) ++{ ++ int err; ++ struct spi_transfer transfer; ++ struct spi_message msg; ++ uint8_t txbuf[2]; ++ uint8_t rxbuf[2]; ++ ++ if (!pisnd_spi_device) { ++ printe("pisnd_spi_device null, returning\n"); ++ return 0; ++ } ++ ++ spi_message_init(&msg); ++ ++ memset(&transfer, 0, sizeof(transfer)); ++ memset(&rxbuf, 0, sizeof(rxbuf)); ++ ++ txbuf[0] = val >> 8; ++ txbuf[1] = val & 0xff; ++ ++ transfer.tx_buf = &txbuf; ++ transfer.rx_buf = &rxbuf; ++ transfer.len = sizeof(txbuf); ++ transfer.speed_hz = 125000; ++ transfer.delay_usecs = 100; ++ spi_message_add_tail(&transfer, &msg); ++ ++ spin_lock_irqsave(&spilock, spilockflags); ++ err = spi_sync(pisnd_spi_device, &msg); ++ spin_unlock_irqrestore(&spilock, spilockflags); ++ ++ if (err < 0) { ++ printe("spi_sync error %d\n", err); ++ return 0; ++ } ++ ++ printd("received: %02x%02x\n", rxbuf[0], rxbuf[1]); ++ printd("hasMore %d\n", pisnd_spi_has_more()); ++ ++ return (rxbuf[0] << 8) | rxbuf[1]; ++} ++ ++static int spi_read_bytes(char *dst, size_t length, uint8_t *bytesRead) ++{ ++ uint16_t rx; ++ uint8_t size; ++ uint8_t i; ++ ++ memset(dst, 0, length); ++ *bytesRead = 0; ++ ++ rx = spi_transfer16(0); ++ if (!(rx >> 8)) ++ return -EINVAL; ++ ++ size = rx & 0xff; ++ ++ if (size > length) ++ return -EINVAL; ++ ++ for (i = 0; i < size; ++i) { ++ rx = spi_transfer16(0); ++ if (!(rx >> 8)) ++ return -EINVAL; ++ ++ dst[i] = rx & 0xff; ++ } ++ ++ *bytesRead = i; ++ ++ return 0; ++} ++ ++static int spi_device_match(struct device *dev, void *data) ++{ ++ struct spi_device *spi = container_of(dev, struct spi_device, dev); ++ ++ printd(" %s %s %dkHz %d bits mode=0x%02X\n", ++ spi->modalias, dev_name(dev), spi->max_speed_hz/1000, ++ spi->bits_per_word, spi->mode); ++ ++ if (strcmp("pisound-spi", spi->modalias) == 0) { ++ printi("\tFound!\n"); ++ return 1; ++ } ++ ++ printe("\tNot found!\n"); ++ return 0; ++} ++ ++static struct spi_device *pisnd_spi_find_device(void) ++{ ++ struct device *dev; ++ ++ printi("Searching for spi device...\n"); ++ dev = bus_find_device(&spi_bus_type, NULL, NULL, spi_device_match); ++ if (dev != NULL) ++ return container_of(dev, struct spi_device, dev); ++ else ++ return NULL; ++} ++ ++static void pisnd_work_handler(struct work_struct *work) ++{ ++ uint16_t rx; ++ uint16_t tx; ++ uint8_t val; ++ ++ if (work == &pisnd_work_process) { ++ if (pisnd_spi_device == NULL) ++ return; ++ ++ do { ++ val = 0; ++ tx = 0; ++ ++ if (kfifo_get(&spi_fifo_out, &val)) ++ tx = 0x0f00 | val; ++ ++ rx = spi_transfer16(tx); ++ ++ if (rx & 0xff00) { ++ kfifo_put(&spi_fifo_in, rx & 0xff); ++ if (kfifo_len(&spi_fifo_in) > 16 ++ && g_recvCallback) ++ g_recvCallback(g_recvData); ++ } ++ } while (rx != 0 ++ || !kfifo_is_empty(&spi_fifo_out) ++ || pisnd_spi_has_more() ++ ); ++ ++ if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) ++ g_recvCallback(g_recvData); ++ } ++} ++ ++static int pisnd_spi_gpio_init(struct device *dev) ++{ ++ spi_reset = gpiod_get_index(dev, "reset", 1, GPIOD_ASIS); ++ data_available = gpiod_get_index(dev, "data_available", 0, GPIOD_ASIS); ++ ++ gpiod_direction_output(spi_reset, 1); ++ gpiod_direction_input(data_available); ++ ++ /* Reset the slave. */ ++ gpiod_set_value(spi_reset, false); ++ mdelay(1); ++ gpiod_set_value(spi_reset, true); ++ ++ /* Give time for spi slave to start. */ ++ mdelay(64); ++ ++ return 0; ++} ++ ++static void pisnd_spi_gpio_uninit(void) ++{ ++ gpiod_set_value(spi_reset, false); ++ gpiod_put(spi_reset); ++ spi_reset = NULL; ++ ++ gpiod_put(data_available); ++ data_available = NULL; ++} ++ ++static int pisnd_spi_gpio_irq_init(struct device *dev) ++{ ++ return request_irq( ++ gpiod_to_irq(data_available), ++ data_available_interrupt_handler, ++ IRQF_TIMER | IRQF_TRIGGER_RISING, ++ "data_available_int", ++ NULL ++ ); ++} ++ ++static void pisnd_spi_gpio_irq_uninit(void) ++{ ++ free_irq(gpiod_to_irq(data_available), NULL); ++} ++ ++static int spi_read_info(void) ++{ ++ uint16_t tmp; ++ uint8_t count; ++ uint8_t n; ++ uint8_t i; ++ uint8_t j; ++ char buffer[257]; ++ int ret; ++ char *p; ++ ++ memset(g_serial_num, 0, sizeof(g_serial_num)); ++ memset(g_version, 0, sizeof(g_version)); ++ memset(g_id, 0, sizeof(g_id)); ++ ++ tmp = spi_transfer16(0); ++ ++ if (!(tmp >> 8)) ++ return -EINVAL; ++ ++ count = tmp & 0xff; ++ ++ for (i = 0; i < count; ++i) { ++ memset(buffer, 0, sizeof(buffer)); ++ ret = spi_read_bytes(buffer, sizeof(buffer)-1, &n); ++ ++ if (ret < 0) ++ return ret; ++ ++ switch (i) { ++ case 0: ++ if (n != 2) ++ return -EINVAL; ++ ++ snprintf( ++ g_version, ++ sizeof(g_version), ++ "%x.%02x", ++ buffer[0], ++ buffer[1] ++ ); ++ break; ++ case 1: ++ if (n >= sizeof(g_serial_num)) ++ return -EINVAL; ++ ++ memcpy(g_serial_num, buffer, sizeof(g_serial_num)); ++ break; ++ case 2: ++ { ++ if (n >= sizeof(g_id)) ++ return -EINVAL; ++ ++ p = g_id; ++ for (j = 0; j < n; ++j) ++ p += sprintf(p, "%02x", buffer[j]); ++ } ++ break; ++ default: ++ break; ++ } ++ } ++ ++ return 0; ++} ++ ++static int pisnd_spi_init(struct device *dev) ++{ ++ int ret; ++ struct spi_device *spi; ++ ++ memset(g_serial_num, 0, sizeof(g_serial_num)); ++ memset(g_id, 0, sizeof(g_id)); ++ memset(g_version, 0, sizeof(g_version)); ++ ++ spi = pisnd_spi_find_device(); ++ ++ if (spi != NULL) { ++ printd("initializing spi!\n"); ++ pisnd_spi_device = spi; ++ ret = spi_setup(pisnd_spi_device); ++ } else { ++ printe("SPI device not found, deferring!\n"); ++ return -EPROBE_DEFER; ++ } ++ ++ ret = pisnd_spi_gpio_init(dev); ++ ++ if (ret < 0) { ++ printe("SPI GPIO init failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_uninit(); ++ return ret; ++ } ++ ++ ret = spi_read_info(); ++ ++ if (ret < 0) { ++ printe("Reading card info failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_uninit(); ++ return ret; ++ } ++ ++ /* Flash the LEDs. */ ++ spi_transfer16(0xf000); ++ ++ ret = pisnd_spi_gpio_irq_init(dev); ++ if (ret < 0) { ++ printe("SPI irq request failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++ } ++ ++ ret = pisnd_init_workqueues(); ++ if (ret != 0) { ++ printe("Workqueue initialization failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++ pisnd_uninit_workqueues(); ++ return ret; ++ } ++ ++ if (pisnd_spi_has_more()) { ++ printd("data is available, scheduling from init\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++ } ++ ++ return 0; ++} ++ ++static void pisnd_spi_uninit(void) ++{ ++ pisnd_uninit_workqueues(); ++ ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++} ++ ++static void pisnd_spi_send(uint8_t val) ++{ ++ kfifo_put(&spi_fifo_out, val); ++ printd("schedule from spi_send\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++} ++ ++static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length) ++{ ++ return kfifo_out(&spi_fifo_in, buffer, length); ++} ++ ++static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data) ++{ ++ g_recvData = data; ++ g_recvCallback = cb; ++} ++ ++static const char *pisnd_spi_get_serial(void) ++{ ++ if (strlen(g_serial_num)) ++ return g_serial_num; ++ ++ return ""; ++} ++ ++static const char *pisnd_spi_get_id(void) ++{ ++ if (strlen(g_id)) ++ return g_id; ++ ++ return ""; ++} ++ ++static const char *pisnd_spi_get_version(void) ++{ ++ if (strlen(g_version)) ++ return g_version; ++ ++ return ""; ++} ++ ++static const struct of_device_id pisound_of_match[] = { ++ { .compatible = "blokaslabs,pisound", }, ++ { .compatible = "blokaslabs,pisound-spi", }, ++ {}, ++}; ++ ++static struct gpio_desc *osr0, *osr1, *osr2; ++static struct gpio_desc *reset; ++static struct gpio_desc *button; ++ ++static int pisnd_hw_params( ++ struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params ++ ) ++{ ++ printd("rate = %d\n", params_rate(params)); ++ printd("ch = %d\n", params_channels(params)); ++ printd("bits = %u\n", ++ snd_pcm_format_physical_width(params_format(params))); ++ printd("format = %d\n", params_format(params)); ++ ++ gpiod_set_value(reset, false); ++ ++ switch (params_rate(params)) { ++ case 48000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, false); ++ gpiod_set_value(osr2, false); ++ break; ++ case 96000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, true); ++ gpiod_set_value(osr2, false); ++ break; ++ case 192000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, true); ++ gpiod_set_value(osr2, true); ++ break; ++ default: ++ printe("Unsupported rate %u!\n", params_rate(params)); ++ return -EINVAL; ++ } ++ ++ gpiod_set_value(reset, true); ++ ++ return 0; ++} ++ ++static unsigned int rates[3] = { ++ 48000, 96000, 192000 ++}; ++ ++static struct snd_pcm_hw_constraint_list constraints_rates = { ++ .count = ARRAY_SIZE(rates), ++ .list = rates, ++ .mask = 0, ++}; ++ ++static unsigned int sample_bits[] = { ++ 24, 32 ++}; ++ ++static struct snd_pcm_hw_constraint_list constraints_sample_bits = { ++ .count = ARRAY_SIZE(sample_bits), ++ .list = sample_bits, ++ .mask = 0, ++}; ++ ++static int pisnd_startup(struct snd_pcm_substream *substream) ++{ ++ int err = snd_pcm_hw_constraint_list( ++ substream->runtime, ++ 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &constraints_rates ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ err = snd_pcm_hw_constraint_list( ++ substream->runtime, ++ 0, ++ SNDRV_PCM_HW_PARAM_SAMPLE_BITS, ++ &constraints_sample_bits ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ return 0; ++} ++ ++static struct snd_soc_ops pisnd_ops = { ++ .startup = pisnd_startup, ++ .hw_params = pisnd_hw_params, ++}; ++ ++static struct snd_soc_dai_link pisnd_dai[] = { ++ { ++ .name = "pisound", ++ .stream_name = "pisound", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "snd-soc-dummy-dai", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "snd-soc-dummy", ++ .dai_fmt = ++ SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &pisnd_ops, ++ }, ++}; ++ ++static int pisnd_card_probe(struct snd_soc_card *card) ++{ ++ int err = pisnd_midi_init(card->snd_card); ++ ++ if (err < 0) ++ printe("pisnd_midi_init failed: %d\n", err); ++ ++ return err; ++} ++ ++static int pisnd_card_remove(struct snd_soc_card *card) ++{ ++ pisnd_midi_uninit(); ++ return 0; ++} ++ ++static struct snd_soc_card pisnd_card = { ++ .name = "pisound", ++ .owner = THIS_MODULE, ++ .dai_link = pisnd_dai, ++ .num_links = ARRAY_SIZE(pisnd_dai), ++ .probe = pisnd_card_probe, ++ .remove = pisnd_card_remove, ++}; ++ ++static int pisnd_init_gpio(struct device *dev) ++{ ++ osr0 = gpiod_get_index(dev, "osr", 0, GPIOD_ASIS); ++ osr1 = gpiod_get_index(dev, "osr", 1, GPIOD_ASIS); ++ osr2 = gpiod_get_index(dev, "osr", 2, GPIOD_ASIS); ++ ++ reset = gpiod_get_index(dev, "reset", 0, GPIOD_ASIS); ++ ++ button = gpiod_get_index(dev, "button", 0, GPIOD_ASIS); ++ ++ gpiod_direction_output(osr0, 1); ++ gpiod_direction_output(osr1, 1); ++ gpiod_direction_output(osr2, 1); ++ gpiod_direction_output(reset, 1); ++ ++ gpiod_set_value(reset, false); ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, false); ++ gpiod_set_value(osr2, false); ++ gpiod_set_value(reset, true); ++ ++ gpiod_export(button, false); ++ ++ return 0; ++} ++ ++static int pisnd_uninit_gpio(void) ++{ ++ int i; ++ ++ struct gpio_desc **gpios[] = { ++ &osr0, &osr1, &osr2, &reset, &button, ++ }; ++ ++ gpiod_unexport(button); ++ ++ for (i = 0; i < ARRAY_SIZE(gpios); ++i) { ++ if (*gpios[i] == NULL) { ++ printd("weird, GPIO[%d] is NULL already\n", i); ++ continue; ++ } ++ ++ gpiod_put(*gpios[i]); ++ *gpios[i] = NULL; ++ } ++ ++ return 0; ++} ++ ++static struct kobject *pisnd_kobj; ++ ++static ssize_t pisnd_serial_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_serial()); ++} ++ ++static ssize_t pisnd_id_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_id()); ++} ++ ++static ssize_t pisnd_version_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_version()); ++} ++ ++static struct kobj_attribute pisnd_serial_attribute = ++ __ATTR(serial, 0644, pisnd_serial_show, NULL); ++static struct kobj_attribute pisnd_id_attribute = ++ __ATTR(id, 0644, pisnd_id_show, NULL); ++static struct kobj_attribute pisnd_version_attribute = ++ __ATTR(version, 0644, pisnd_version_show, NULL); ++ ++static struct attribute *attrs[] = { ++ &pisnd_serial_attribute.attr, ++ &pisnd_id_attribute.attr, ++ &pisnd_version_attribute.attr, ++ NULL ++}; ++ ++static struct attribute_group attr_group = { .attrs = attrs }; ++ ++static int pisnd_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ int i; ++ ++ ret = pisnd_spi_init(&pdev->dev); ++ if (ret < 0) { ++ printe("pisnd_spi_init failed: %d\n", ret); ++ return ret; ++ } ++ ++ printi("Detected pisound card:\n"); ++ printi("\tSerial: %s\n", pisnd_spi_get_serial()); ++ printi("\tVersion: %s\n", pisnd_spi_get_version()); ++ printi("\tId: %s\n", pisnd_spi_get_id()); ++ ++ pisnd_kobj = kobject_create_and_add("pisound", kernel_kobj); ++ if (!pisnd_kobj) { ++ pisnd_spi_uninit(); ++ return -ENOMEM; ++ } ++ ++ ret = sysfs_create_group(pisnd_kobj, &attr_group); ++ if (ret < 0) { ++ pisnd_spi_uninit(); ++ kobject_put(pisnd_kobj); ++ return -ENOMEM; ++ } ++ ++ pisnd_init_gpio(&pdev->dev); ++ pisnd_card.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ ++ i2s_node = of_parse_phandle( ++ pdev->dev.of_node, ++ "i2s-controller", ++ 0 ++ ); ++ ++ for (i = 0; i < pisnd_card.num_links; ++i) { ++ struct snd_soc_dai_link *dai = &pisnd_dai[i]; ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ dai->stream_name = pisnd_spi_get_serial(); ++ } ++ } ++ } ++ ++ ret = snd_soc_register_card(&pisnd_card); ++ ++ if (ret < 0) { ++ printe("snd_soc_register_card() failed: %d\n", ret); ++ pisnd_uninit_gpio(); ++ kobject_put(pisnd_kobj); ++ pisnd_spi_uninit(); ++ } ++ ++ return ret; ++} ++ ++static int pisnd_remove(struct platform_device *pdev) ++{ ++ printi("Unloading.\n"); ++ ++ if (pisnd_kobj) { ++ kobject_put(pisnd_kobj); ++ pisnd_kobj = NULL; ++ } ++ ++ pisnd_spi_uninit(); ++ ++ /* Turn off */ ++ gpiod_set_value(reset, false); ++ pisnd_uninit_gpio(); ++ ++ return snd_soc_unregister_card(&pisnd_card); ++} ++ ++MODULE_DEVICE_TABLE(of, pisound_of_match); ++ ++static struct platform_driver pisnd_driver = { ++ .driver = { ++ .name = "snd-rpi-pisound", ++ .owner = THIS_MODULE, ++ .of_match_table = pisound_of_match, ++ }, ++ .probe = pisnd_probe, ++ .remove = pisnd_remove, ++}; ++ ++module_platform_driver(pisnd_driver); ++ ++MODULE_AUTHOR("Giedrius Trainavicius "); ++MODULE_DESCRIPTION("ASoC Driver for pisound, http://blokas.io/pisound"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1084_91b5dcf7421da90ee0ce5f8b5303cb12927ba953.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1084_91b5dcf7421da90ee0ce5f8b5303cb12927ba953.patch --- linux-4.9.13/debian/patches/rpi/rpi_1084_91b5dcf7421da90ee0ce5f8b5303cb12927ba953.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1084_91b5dcf7421da90ee0ce5f8b5303cb12927ba953.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,166 @@ +commit 91b5dcf7421da90ee0ce5f8b5303cb12927ba953 +Author: P33M +Date: Wed Oct 21 14:55:21 2015 +0100 + + rpi_display: add backlight driver and overlay + + Add a mailbox-driven backlight controller for the Raspberry Pi DSI + touchscreen display. Requires updated GPU firmware to recognise the + mailbox request. + + Signed-off-by: Gordon Hollingworth + +diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig +index 5ffa4b4e26c0..c3023ab052b4 100644 +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -265,6 +265,12 @@ config BACKLIGHT_PWM + If you have a LCD backlight adjustable by PWM, say Y to enable + this driver. + ++config BACKLIGHT_RPI ++ tristate "Raspberry Pi display firmware driven backlight" ++ help ++ If you have the Raspberry Pi DSI touchscreen display, say Y to ++ enable the mailbox-controlled backlight driver. ++ + config BACKLIGHT_DA903X + tristate "Backlight Driver for DA9030/DA9034 using WLED" + depends on PMIC_DA903X +diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile +index 16ec534cff30..00eff87fb339 100644 +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o + obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o + obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o + obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o ++obj-$(CONFIG_BACKLIGHT_RPI) += rpi_backlight.o + obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o + obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o + obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o +diff --git a/drivers/video/backlight/rpi_backlight.c b/drivers/video/backlight/rpi_backlight.c +new file mode 100644 +index 000000000000..14a0d9b03739 +--- /dev/null ++++ b/drivers/video/backlight/rpi_backlight.c +@@ -0,0 +1,119 @@ ++/* ++ * rpi_bl.c - Backlight controller through VPU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct rpi_backlight { ++ struct device *dev; ++ struct device *fbdev; ++ struct rpi_firmware *fw; ++}; ++ ++static int rpi_backlight_update_status(struct backlight_device *bl) ++{ ++ struct rpi_backlight *gbl = bl_get_data(bl); ++ int brightness = bl->props.brightness; ++ int ret; ++ ++ if (bl->props.power != FB_BLANK_UNBLANK || ++ bl->props.fb_blank != FB_BLANK_UNBLANK || ++ bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) ++ brightness = 0; ++ ++ ret = rpi_firmware_property(gbl->fw, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT, ++ &brightness, sizeof(brightness)); ++ if (ret) { ++ dev_err(gbl->dev, "Failed to set brightness\n"); ++ return ret; ++ } ++ ++ if (brightness < 0) { ++ dev_err(gbl->dev, "Backlight change failed\n"); ++ return -EAGAIN; ++ } ++ ++ return 0; ++} ++ ++static const struct backlight_ops rpi_backlight_ops = { ++ .options = BL_CORE_SUSPENDRESUME, ++ .update_status = rpi_backlight_update_status, ++}; ++ ++static int rpi_backlight_probe(struct platform_device *pdev) ++{ ++ struct backlight_properties props; ++ struct backlight_device *bl; ++ struct rpi_backlight *gbl; ++ struct device_node *fw_node; ++ ++ gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL); ++ if (gbl == NULL) ++ return -ENOMEM; ++ ++ gbl->dev = &pdev->dev; ++ ++ fw_node = of_parse_phandle(pdev->dev.of_node, "firmware", 0); ++ if (!fw_node) { ++ dev_err(&pdev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ gbl->fw = rpi_firmware_get(fw_node); ++ if (!gbl->fw) ++ return -EPROBE_DEFER; ++ ++ memset(&props, 0, sizeof(props)); ++ props.type = BACKLIGHT_RAW; ++ props.max_brightness = 255; ++ bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev), ++ &pdev->dev, gbl, &rpi_backlight_ops, ++ &props); ++ if (IS_ERR(bl)) { ++ dev_err(&pdev->dev, "failed to register backlight\n"); ++ return PTR_ERR(bl); ++ } ++ ++ bl->props.brightness = 255; ++ backlight_update_status(bl); ++ ++ platform_set_drvdata(pdev, bl); ++ return 0; ++} ++ ++static const struct of_device_id rpi_backlight_of_match[] = { ++ { .compatible = "raspberrypi,rpi-backlight" }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, rpi_backlight_of_match); ++ ++static struct platform_driver rpi_backlight_driver = { ++ .driver = { ++ .name = "rpi-backlight", ++ .of_match_table = of_match_ptr(rpi_backlight_of_match), ++ }, ++ .probe = rpi_backlight_probe, ++}; ++ ++module_platform_driver(rpi_backlight_driver); ++ ++MODULE_AUTHOR("Gordon Hollingworth "); ++MODULE_DESCRIPTION("Raspberry Pi mailbox based Backlight Driver"); ++MODULE_LICENSE("GPL"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1085_a0c8bd4ad578a151381182a4ab6e4768c1f98145.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1085_a0c8bd4ad578a151381182a4ab6e4768c1f98145.patch --- linux-4.9.13/debian/patches/rpi/rpi_1085_a0c8bd4ad578a151381182a4ab6e4768c1f98145.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1085_a0c8bd4ad578a151381182a4ab6e4768c1f98145.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,270 @@ +commit a0c8bd4ad578a151381182a4ab6e4768c1f98145 +Author: popcornmix +Date: Tue Feb 23 19:56:04 2016 +0000 + + bcm2835-virtgpio: Virtual GPIO driver + + Add a virtual GPIO driver that uses the firmware mailbox interface to + request that the VPU toggles LEDs. + +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +index ed37e5908b91..edcb49f9051b 100644 +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -134,6 +134,12 @@ config GPIO_BCM_KONA + help + Turn on GPIO support for Broadcom "Kona" chips. + ++config GPIO_BCM_VIRT ++ bool "Broadcom Virt GPIO" ++ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) ++ help ++ Turn on virtual GPIO support for Broadcom BCM283X chips. ++ + config GPIO_BRCMSTB + tristate "BRCMSTB GPIO support" + default y if (ARCH_BRCMSTB || BMIPS_GENERIC) +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index d074c2299393..cfb8d4bad6b0 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o + obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o + obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o ++obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o + obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o + obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o +diff --git a/drivers/gpio/gpio-bcm-virt.c b/drivers/gpio/gpio-bcm-virt.c +new file mode 100644 +index 000000000000..c3725546def9 +--- /dev/null ++++ b/drivers/gpio/gpio-bcm-virt.c +@@ -0,0 +1,214 @@ ++/* ++ * brcmvirt GPIO driver ++ * ++ * Copyright (C) 2012,2013 Dom Cobley ++ * Based on gpio-clps711x.c by Alexander Shiyan ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MODULE_NAME "brcmvirt-gpio" ++#define NUM_GPIO 2 ++ ++struct brcmvirt_gpio { ++ struct gpio_chip gc; ++ u32 __iomem *ts_base; ++ /* two packed 16-bit counts of enabled and disables ++ Allows host to detect a brief enable that was missed */ ++ u32 enables_disables[NUM_GPIO]; ++ dma_addr_t bus_addr; ++}; ++ ++static int brcmvirt_gpio_dir_in(struct gpio_chip *gc, unsigned off) ++{ ++ struct brcmvirt_gpio *gpio; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ return -EINVAL; ++} ++ ++static int brcmvirt_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val) ++{ ++ struct brcmvirt_gpio *gpio; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ return 0; ++} ++ ++static int brcmvirt_gpio_get(struct gpio_chip *gc, unsigned off) ++{ ++ struct brcmvirt_gpio *gpio; ++ unsigned v; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ v = readl(gpio->ts_base + off); ++ return (v >> off) & 1; ++} ++ ++static void brcmvirt_gpio_set(struct gpio_chip *gc, unsigned off, int val) ++{ ++ struct brcmvirt_gpio *gpio; ++ u16 enables, disables; ++ s16 diff; ++ bool lit; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ enables = gpio->enables_disables[off] >> 16; ++ disables = gpio->enables_disables[off] >> 0; ++ diff = (s16)(enables - disables); ++ lit = diff > 0; ++ if ((val && lit) || (!val && !lit)) ++ return; ++ if (val) ++ enables++; ++ else ++ disables++; ++ diff = (s16)(enables - disables); ++ BUG_ON(diff != 0 && diff != 1); ++ gpio->enables_disables[off] = (enables << 16) | (disables << 0); ++ writel(gpio->enables_disables[off], gpio->ts_base + off); ++} ++ ++static int brcmvirt_gpio_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ struct brcmvirt_gpio *ucb; ++ u32 gpiovirtbuf; ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ucb = devm_kzalloc(dev, sizeof *ucb, GFP_KERNEL); ++ if (!ucb) { ++ err = -EINVAL; ++ goto out; ++ } ++ ++ ucb->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ucb->bus_addr, GFP_KERNEL); ++ if (!ucb->ts_base) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", ++ __func__, PAGE_SIZE); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ gpiovirtbuf = (u32)ucb->bus_addr; ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF, ++ &gpiovirtbuf, sizeof(gpiovirtbuf)); ++ ++ if (err || gpiovirtbuf != 0) { ++ dev_warn(dev, "Failed to set gpiovirtbuf, trying to get err:%x\n", err); ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ ucb->ts_base = 0; ++ ucb->bus_addr = 0; ++ } ++ ++ if (!ucb->ts_base) { ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF, ++ &gpiovirtbuf, sizeof(gpiovirtbuf)); ++ ++ if (err) { ++ dev_err(dev, "Failed to get gpiovirtbuf\n"); ++ goto out; ++ } ++ ++ if (!gpiovirtbuf) { ++ dev_err(dev, "No virtgpio buffer\n"); ++ err = -ENOENT; ++ goto out; ++ } ++ ++ // mmap the physical memory ++ gpiovirtbuf &= ~0xc0000000; ++ ucb->ts_base = ioremap(gpiovirtbuf, 4096); ++ if (ucb->ts_base == NULL) { ++ dev_err(dev, "Failed to map physical address\n"); ++ err = -ENOENT; ++ goto out; ++ } ++ ucb->bus_addr = 0; ++ } ++ ucb->gc.label = MODULE_NAME; ++ ucb->gc.owner = THIS_MODULE; ++ //ucb->gc.dev = dev; ++ ucb->gc.of_node = np; ++ ucb->gc.base = 100; ++ ucb->gc.ngpio = NUM_GPIO; ++ ++ ucb->gc.direction_input = brcmvirt_gpio_dir_in; ++ ucb->gc.direction_output = brcmvirt_gpio_dir_out; ++ ucb->gc.get = brcmvirt_gpio_get; ++ ucb->gc.set = brcmvirt_gpio_set; ++ ucb->gc.can_sleep = true; ++ ++ err = gpiochip_add(&ucb->gc); ++ if (err) ++ goto out; ++ ++ platform_set_drvdata(pdev, ucb); ++ ++ return 0; ++out: ++ if (ucb->bus_addr) { ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ ucb->bus_addr = 0; ++ ucb->ts_base = NULL; ++ } else if (ucb->ts_base) { ++ iounmap(ucb->ts_base); ++ ucb->ts_base = NULL; ++ } ++ return err; ++} ++ ++static int brcmvirt_gpio_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ int err = 0; ++ struct brcmvirt_gpio *ucb = platform_get_drvdata(pdev); ++ ++ gpiochip_remove(&ucb->gc); ++ if (ucb->bus_addr) ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ else if (ucb->ts_base) ++ iounmap(ucb->ts_base); ++ return err; ++} ++ ++static const struct of_device_id __maybe_unused brcmvirt_gpio_ids[] = { ++ { .compatible = "brcm,bcm2835-virtgpio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, brcmvirt_gpio_ids); ++ ++static struct platform_driver brcmvirt_gpio_driver = { ++ .driver = { ++ .name = MODULE_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(brcmvirt_gpio_ids), ++ }, ++ .probe = brcmvirt_gpio_probe, ++ .remove = brcmvirt_gpio_remove, ++}; ++module_platform_driver(brcmvirt_gpio_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dom Cobley "); ++MODULE_DESCRIPTION("brcmvirt GPIO driver"); ++MODULE_ALIAS("platform:brcmvirt-gpio"); +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index b0f6e33bd30c..e92278968b2b 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -116,6 +116,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1086_334060800d9251be9e7ea257749f7db55ae035aa.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1086_334060800d9251be9e7ea257749f7db55ae035aa.patch --- linux-4.9.13/debian/patches/rpi/rpi_1086_334060800d9251be9e7ea257749f7db55ae035aa.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1086_334060800d9251be9e7ea257749f7db55ae035aa.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,29 @@ +commit 334060800d9251be9e7ea257749f7db55ae035aa +Author: Phil Elwell +Date: Tue Feb 23 17:26:48 2016 +0000 + + amba_pl011: Don't use DT aliases for numbering + + The pl011 driver looks for DT aliases of the form "serial", + and if found uses as the device ID. This can cause + /dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the + other serial port is provided by the 8250 driver which doesn't + use the same logic. + +diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c +index e2c33b9528d8..5a11ff833e1f 100644 +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -2441,7 +2441,12 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, + if (IS_ERR(base)) + return PTR_ERR(base); + ++ /* Don't use DT serial aliases - it causes the device to ++ be renumbered to ttyAMA1 if it is the second serial port in the ++ system, even though the other one is ttyS0. The 8250 driver ++ doesn't use this logic, so always remains ttyS0. + index = pl011_probe_dt_alias(index, dev); ++ */ + + uap->old_cr = 0; + uap->port.dev = dev; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1087_b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1087_b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21.patch --- linux-4.9.13/debian/patches/rpi/rpi_1087_b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1087_b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,172319 @@ +commit b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21 +Author: popcornmix +Date: Mon Sep 3 17:10:23 2012 +0100 + + net: Add non-mainline source for rtl8192cu wlan + + Add non-mainline source for rtl8192cu wireless driver version v4.0.2_9000 as + this is widely used. Disable older rtlwifi driver. + + 8192cu needs old wireless extensions + + The obsolete WIRELESS_EXT configuration is used + by the old Realtek code and is needed for AP support. + + 8192cu: CONFIG_AP_MODE hardcoded in autoconf.h + + rtl8192c_rf6052: PHY_RFShadowRefresh(): fix off-by-one + + Signed-off-by: Marc Kleine-Budde + + rtl8192cu: Add PID for D-Link DWA 131 + +diff --git a/drivers/net/wireless/realtek/Kconfig b/drivers/net/wireless/realtek/Kconfig +index 8a8ba2003964..7df19ad94856 100644 +--- a/drivers/net/wireless/realtek/Kconfig ++++ b/drivers/net/wireless/realtek/Kconfig +@@ -13,6 +13,7 @@ if WLAN_VENDOR_REALTEK + + source "drivers/net/wireless/realtek/rtl818x/Kconfig" + source "drivers/net/wireless/realtek/rtlwifi/Kconfig" ++source "drivers/net/wireless/realtek/rtl8192cu/Kconfig" + source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig" + + endif # WLAN_VENDOR_REALTEK +diff --git a/drivers/net/wireless/realtek/Makefile b/drivers/net/wireless/realtek/Makefile +index 9c78deb5eea9..e5407ed50833 100644 +--- a/drivers/net/wireless/realtek/Makefile ++++ b/drivers/net/wireless/realtek/Makefile +@@ -5,5 +5,6 @@ + obj-$(CONFIG_RTL8180) += rtl818x/ + obj-$(CONFIG_RTL8187) += rtl818x/ + obj-$(CONFIG_RTLWIFI) += rtlwifi/ ++obj-$(CONFIG_RTL8192CU) += rtl8192cu/ + obj-$(CONFIG_RTL8XXXU) += rtl8xxxu/ + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/Kconfig b/drivers/net/wireless/realtek/rtl8192cu/Kconfig +new file mode 100644 +index 000000000000..cd7830bb9d5d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/Kconfig +@@ -0,0 +1,9 @@ ++config RTL8192CU ++ tristate "Realtek 8192C USB WiFi" ++ depends on MAC80211 && USB ++ select CFG80211_WEXT ++ select WIRELESS_EXT ++ select WEXT_PRIV ++ ---help--- ++ This option adds the Realtek RTL8192CU USB device such as Edimax EW-7811Un. ++ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/Makefile b/drivers/net/wireless/realtek/rtl8192cu/Makefile +new file mode 100644 +index 000000000000..bc137ab9f261 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/Makefile +@@ -0,0 +1,615 @@ ++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) ++EXTRA_CFLAGS += -O1 ++#EXTRA_CFLAGS += -O3 ++#EXTRA_CFLAGS += -Wall ++#EXTRA_CFLAGS += -Wextra ++#EXTRA_CFLAGS += -Werror ++#EXTRA_CFLAGS += -pedantic ++#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes ++ ++EXTRA_CFLAGS += -Wno-unused-variable ++EXTRA_CFLAGS += -Wno-unused-value ++EXTRA_CFLAGS += -Wno-unused-label ++EXTRA_CFLAGS += -Wno-unused-parameter ++EXTRA_CFLAGS += -Wno-unused-function ++EXTRA_CFLAGS += -Wno-unused ++ ++EXTRA_CFLAGS += -Wno-uninitialized ++ ++EXTRA_CFLAGS += -I$(src)/include ++ ++CONFIG_AUTOCFG_CP = n ++ ++CONFIG_RTL8192C = y ++CONFIG_RTL8192D = n ++CONFIG_RTL8723A = n ++ ++CONFIG_USB_HCI = y ++CONFIG_PCI_HCI = n ++CONFIG_SDIO_HCI = n ++ ++CONFIG_MP_INCLUDED = n ++CONFIG_POWER_SAVING = y ++CONFIG_USB_AUTOSUSPEND = n ++CONFIG_HW_PWRP_DETECTION = n ++CONFIG_WIFI_TEST = n ++CONFIG_BT_COEXISTENCE = n ++CONFIG_RTL8192CU_REDEFINE_1X1 = n ++CONFIG_INTEL_WIDI = n ++CONFIG_WAKE_ON_WLAN = n ++ ++CONFIG_PLATFORM_I386_PC = y ++CONFIG_PLATFORM_TI_AM3517 = n ++CONFIG_PLATFORM_ANDROID_X86 = n ++CONFIG_PLATFORM_JB_X86 = n ++CONFIG_PLATFORM_ARM_S3C2K4 = n ++CONFIG_PLATFORM_ARM_PXA2XX = n ++CONFIG_PLATFORM_ARM_S3C6K4 = n ++CONFIG_PLATFORM_MIPS_RMI = n ++CONFIG_PLATFORM_RTD2880B = n ++CONFIG_PLATFORM_MIPS_AR9132 = n ++CONFIG_PLATFORM_RTK_DMP = n ++CONFIG_PLATFORM_MIPS_PLM = n ++CONFIG_PLATFORM_MSTAR389 = n ++CONFIG_PLATFORM_MT53XX = n ++CONFIG_PLATFORM_ARM_MX51_241H = n ++CONFIG_PLATFORM_FS_MX61 = n ++CONFIG_PLATFORM_ACTIONS_ATJ227X = n ++CONFIG_PLATFORM_TEGRA3_CARDHU = n ++CONFIG_PLATFORM_TEGRA4_DALMORE = n ++CONFIG_PLATFORM_ARM_TCC8900 = n ++CONFIG_PLATFORM_ARM_TCC8920 = n ++CONFIG_PLATFORM_ARM_TCC8920_JB42 = n ++CONFIG_PLATFORM_ARM_RK2818 = n ++CONFIG_PLATFORM_ARM_TI_PANDA = n ++CONFIG_PLATFORM_MIPS_JZ4760 = n ++CONFIG_PLATFORM_DMP_PHILIPS = n ++CONFIG_PLATFORM_TI_DM365 = n ++CONFIG_PLATFORM_MN10300 = n ++CONFIG_PLATFORM_MSTAR_TITANIA12 = n ++CONFIG_PLATFORM_MSTAR_A3 = n ++CONFIG_PLATFORM_ARM_SUNxI = n ++CONFIG_PLATFORM_ARM_SUN6I = n ++ ++CONFIG_DRVEXT_MODULE = n ++ ++export TopDIR ?= $(shell pwd) ++ ++ ++ifeq ($(CONFIG_RTL8192C), y) ++ ++RTL871X = rtl8192c ++ ++ifeq ($(CONFIG_USB_HCI), y) ++MODULE_NAME = 8192cu ++FW_FILES := hal/$(RTL871X)/usb/Hal8192CUHWImg.o ++ifneq ($(CONFIG_WAKE_ON_WLAN), n) ++FW_FILES += hal/$(RTL871X)/usb/Hal8192CUHWImg_wowlan.o ++endif ++endif ++ifeq ($(CONFIG_PCI_HCI), y) ++MODULE_NAME = 8192ce ++FW_FILES := hal/$(RTL871X)/pci/Hal8192CEHWImg.o ++endif ++ ++CHIP_FILES := \ ++ hal/$(RTL871X)/$(RTL871X)_sreset.o \ ++ hal/$(RTL871X)/$(RTL871X)_xmit.o ++CHIP_FILES += $(FW_FILES) ++endif ++ ++ifeq ($(CONFIG_RTL8192D), y) ++ ++RTL871X = rtl8192d ++ ++ifeq ($(CONFIG_USB_HCI), y) ++MODULE_NAME = 8192du ++FW_FILES := hal/$(RTL871X)/usb/Hal8192DUHWImg.o ++ifneq ($(CONFIG_WAKE_ON_WLAN), n) ++FW_FILES += hal/$(RTL871X)/usb/Hal8192DUHWImg_wowlan.o ++endif ++endif ++ifeq ($(CONFIG_PCI_HCI), y) ++MODULE_NAME = 8192de ++FW_FILES := hal/$(RTL871X)/pci/Hal8192DEHWImg.o ++endif ++ ++CHIP_FILES := \ ++ hal/$(RTL871X)/$(RTL871X)_xmit.o ++CHIP_FILES += $(FW_FILES) ++endif ++ ++ifeq ($(CONFIG_RTL8723A), y) ++ ++RTL871X = rtl8723a ++ ++ifeq ($(CONFIG_SDIO_HCI), y) ++MODULE_NAME = 8723as ++FW_FILES := hal/$(RTL871X)/sdio/Hal8723SHWImg.o ++endif ++ ++ifeq ($(CONFIG_USB_HCI), y) ++MODULE_NAME = 8723au ++FW_FILES := hal/$(RTL871X)/usb/Hal8723UHWImg.o ++endif ++ ++ifeq ($(CONFIG_PCI_HCI), y) ++MODULE_NAME = 8723ae ++FW_FILES := hal/$(RTL871X)/pci/Hal8723EHWImg.o ++endif ++ ++PWRSEQ_FILES := hal/HalPwrSeqCmd.o \ ++ hal/$(RTL871X)/Hal8723PwrSeq.o ++ ++CHIP_FILES += $(FW_FILES) $(PWRSEQ_FILES) ++ ++endif ++ ++ifeq ($(CONFIG_SDIO_HCI), y) ++HCI_NAME = sdio ++endif ++ ++ifeq ($(CONFIG_USB_HCI), y) ++HCI_NAME = usb ++endif ++ ++ifeq ($(CONFIG_PCI_HCI), y) ++HCI_NAME = pci ++endif ++ ++ ++_OS_INTFS_FILES := os_dep/osdep_service.o \ ++ os_dep/linux/os_intfs.o \ ++ os_dep/linux/$(HCI_NAME)_intf.o \ ++ os_dep/linux/$(HCI_NAME)_ops_linux.o \ ++ os_dep/linux/ioctl_linux.o \ ++ os_dep/linux/xmit_linux.o \ ++ os_dep/linux/mlme_linux.o \ ++ os_dep/linux/recv_linux.o \ ++ os_dep/linux/ioctl_cfg80211.o \ ++ os_dep/linux/rtw_android.o ++ ++ ++_HAL_INTFS_FILES := hal/hal_intf.o \ ++ hal/hal_com.o \ ++ hal/dm.o \ ++ hal/$(RTL871X)/$(RTL871X)_hal_init.o \ ++ hal/$(RTL871X)/$(RTL871X)_phycfg.o \ ++ hal/$(RTL871X)/$(RTL871X)_rf6052.o \ ++ hal/$(RTL871X)/$(RTL871X)_dm.o \ ++ hal/$(RTL871X)/$(RTL871X)_rxdesc.o \ ++ hal/$(RTL871X)/$(RTL871X)_cmd.o \ ++ hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \ ++ hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \ ++ hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \ ++ hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o ++ ++ifeq ($(CONFIG_SDIO_HCI), y) ++_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o ++else ++_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o ++endif ++ ++ifeq ($(CONFIG_MP_INCLUDED), y) ++_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_mp.o ++endif ++ ++_HAL_INTFS_FILES += $(CHIP_FILES) ++ ++ ++ifeq ($(CONFIG_AUTOCFG_CP), y) ++$(shell cp $(TopDIR)/autoconf_$(RTL871X)_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h) ++endif ++ ++ ++ifeq ($(CONFIG_USB_HCI), y) ++ifeq ($(CONFIG_USB_AUTOSUSPEND), y) ++EXTRA_CFLAGS += -DCONFIG_USB_AUTOSUSPEND ++endif ++endif ++ ++ifeq ($(CONFIG_POWER_SAVING), y) ++EXTRA_CFLAGS += -DCONFIG_POWER_SAVING ++endif ++ ++ifeq ($(CONFIG_HW_PWRP_DETECTION), y) ++EXTRA_CFLAGS += -DCONFIG_HW_PWRP_DETECTION ++endif ++ ++ifeq ($(CONFIG_WIFI_TEST), y) ++EXTRA_CFLAGS += -DCONFIG_WIFI_TEST ++endif ++ ++ifeq ($(CONFIG_BT_COEXISTENCE), y) ++EXTRA_CFLAGS += -DCONFIG_BT_COEXISTENCE ++endif ++ ++ifeq ($(CONFIG_RTL8192CU_REDEFINE_1X1), y) ++EXTRA_CFLAGS += -DRTL8192C_RECONFIG_TO_1T1R ++endif ++ ++ifeq ($(CONFIG_WAKE_ON_WLAN), y) ++EXTRA_CFLAGS += -DCONFIG_WAKE_ON_WLAN ++endif ++ ++ifeq ($(CONFIG_INTEL_WIDI), y) ++EXTRA_CFLAGS += -DCONFIG_INTEL_WIDI ++endif ++ ++ifeq ($(CONFIG_PLATFORM_I386_PC), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/) ++ARCH ?= $(SUBARCH) ++CROSS_COMPILE ?= ++KVER := $(shell uname -r) ++KSRC := /lib/modules/$(KVER)/build ++MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/ ++INSTALL_PREFIX := ++endif ++ ++ifeq ($(CONFIG_PLATFORM_TI_AM3517), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_SHUTTLE ++CROSS_COMPILE := arm-eabi- ++KSRC := $(shell pwd)/../../../Android/kernel ++ARCH := arm ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MSTAR_TITANIA12), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR -DCONFIG_PLATFORM_MSTAR_TITANIA12 ++ARCH:=mips ++CROSS_COMPILE:= /usr/src/Mstar_kernel/mips-4.3/bin/mips-linux-gnu- ++KVER:= 2.6.28.9 ++KSRC:= /usr/src/Mstar_kernel/2.6.28.9/ ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MSTAR_A3), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR -DCONFIG_PLATFORM_MSTAR_A3 ++ARCH:=arm ++CROSS_COMPILE:= arm-none-linux-gnueabi- ++KVER:= 2.6.35.11 ++KSRC:= /home/gary/PERFORCE/THEALE/RedLion/2.6.35.11/ ++MODULE_NAME = wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ANDROID_X86), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/) ++ARCH := $(SUBARCH) ++CROSS_COMPILE := /media/DATA-2/android-x86/ics-x86_20120130/prebuilt/linux-x86/toolchain/i686-unknown-linux-gnu-4.2.1/bin/i686-unknown-linux-gnu- ++KSRC := /media/DATA-2/android-x86/ics-x86_20120130/out/target/product/generic_x86/obj/kernel ++MODULE_NAME :=wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_JB_X86), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE ++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT ++EXTRA_CFLAGS += -DCONFIG_P2P_IPS ++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/) ++ARCH := $(SUBARCH) ++CROSS_COMPILE := /home/android_sdk/android-x86_JB/prebuilts/gcc/linux-x86/x86/i686-linux-android-4.7/bin/i686-linux-android- ++KSRC := /home/android_sdk/android-x86_JB/out/target/product/x86/obj/kernel/ ++MODULE_NAME :=wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_PXA2XX), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := arm-none-linux-gnueabi- ++KVER := 2.6.34.1 ++KSRC ?= /usr/src/linux-2.6.34.1 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_S3C2K4), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := arm-linux- ++KVER := 2.6.24.7_$(ARCH) ++KSRC := /usr/src/kernels/linux-$(KVER) ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_S3C6K4), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := arm-none-linux-gnueabi- ++KVER := 2.6.34.1 ++KSRC ?= /usr/src/linux-2.6.34.1 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_RTD2880B), y) ++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN -DCONFIG_PLATFORM_RTD2880B ++ARCH:= ++CROSS_COMPILE:= ++KVER:= ++KSRC:= ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MIPS_RMI), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH:=mips ++CROSS_COMPILE:=mipsisa32r2-uclibc- ++KVER:= ++KSRC:= /root/work/kernel_realtek ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MIPS_PLM), y) ++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN ++ARCH:=mips ++CROSS_COMPILE:=mipsisa32r2-uclibc- ++KVER:= ++KSRC:= /root/work/kernel_realtek ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MSTAR389), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR389 ++ARCH:=mips ++CROSS_COMPILE:= mips-linux-gnu- ++KVER:= 2.6.28.10 ++KSRC:= /home/mstar/mstar_linux/2.6.28.9/ ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MIPS_AR9132), y) ++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN ++ARCH := mips ++CROSS_COMPILE := mips-openwrt-linux- ++KSRC := /home/alex/test_openwrt/tmp/linux-2.6.30.9 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_DMP_PHILIPS), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM ++ARCH := mips ++#CROSS_COMPILE:=/usr/local/msdk-4.3.6-mips-EL-2.6.12.6-0.9.30.3/bin/mipsel-linux- ++CROSS_COMPILE:=/usr/local/toolchain_mipsel/bin/mipsel-linux- ++KSRC ?=/usr/local/Jupiter/linux-2.6.12 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_RTK_DMP), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM ++ARCH:=mips ++CROSS_COMPILE:=mipsel-linux- ++KVER:= ++KSRC ?= /usr/src/DMP_Kernel/jupiter/linux-2.6.12 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MT53XX), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MT53XX ++ARCH:= arm ++CROSS_COMPILE:= arm11_mtk_le- ++KVER:= 2.6.27 ++KSRC?= /proj/mtk00802/BD_Compare/BDP/Dev/BDP_V301/BDP_Linux/linux-2.6.27 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_MX51_241H), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_WISTRON_PLATFORM ++ARCH := arm ++CROSS_COMPILE := /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi- ++KVER := 2.6.31 ++KSRC ?= /lib/modules/2.6.31-770-g0e46b52/source ++endif ++ ++ifeq ($(CONFIG_PLATFORM_FS_MX61), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := /home/share/CusEnv/FreeScale/arm-eabi-4.4.3/bin/arm-eabi- ++KSRC ?= /home/share/CusEnv/FreeScale/FS_kernel_env ++endif ++ ++ ++ ++ifeq ($(CONFIG_PLATFORM_ACTIONS_ATJ227X), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ACTIONS_ATJ227X ++ARCH := mips ++CROSS_COMPILE := /home/cnsd4/project/actions/tools-2.6.27/bin/mipsel-linux-gnu- ++KVER := 2.6.27 ++KSRC := /home/cnsd4/project/actions/linux-2.6.27.28 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_TI_DM365), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_TI_DM365 ++ARCH := arm ++CROSS_COMPILE := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin/arm_v5t_le- ++KVER := 2.6.18 ++KSRC := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/lsp/ti-davinci/linux-dm365 ++endif ++ ++ifeq ($(CONFIG_PLATFORM_TEGRA3_CARDHU), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++# default setting for Android 4.1, 4.2 ++EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC ++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE ++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT ++EXTRA_CFLAGS += -DCONFIG_P2P_IPS ++ARCH := arm ++CROSS_COMPILE := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- ++KSRC := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/out/target/product/cardhu/obj/KERNEL ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_TEGRA4_DALMORE), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++# default setting for Android 4.1, 4.2 ++EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC ++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE ++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT ++EXTRA_CFLAGS += -DCONFIG_P2P_IPS ++ARCH := arm ++CROSS_COMPILE := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi- ++KSRC := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/out/target/product/dalmore/obj/KERNEL ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_TCC8900), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := /home/android_sdk/Telechips/SDK_2304_20110613/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- ++KSRC := /home/android_sdk/Telechips/SDK_2304_20110613/kernel ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_TCC8920), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++ARCH := arm ++CROSS_COMPILE := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- ++KSRC := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/kernel ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_TCC8920_JB42), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++# default setting for Android 4.1, 4.2 ++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE ++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT ++EXTRA_CFLAGS += -DCONFIG_P2P_IPS ++ARCH := arm ++CROSS_COMPILE := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi- ++KSRC := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/kernel ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_RK2818), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ROCKCHIPS -DCONFIG_MINIMAL_MEMORY_USAGE ++ARCH := arm ++CROSS_COMPILE := /usr/src/release_fae_version/toolchain/arm-eabi-4.4.0/bin/arm-eabi- ++KSRC := /usr/src/release_fae_version/kernel25_A7_281x ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_TI_PANDA), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE ++ARCH := arm ++#CROSS_COMPILE := /media/DATA-1/aosp/ics-aosp_20111227/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- ++#KSRC := /media/DATA-1/aosp/android-omap-panda-3.0_20120104 ++CROSS_COMPILE := /media/DATA-1/android-4.0/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- ++KSRC := /media/DATA-1/android-4.0/panda_kernel/omap ++MODULE_NAME := wlan ++endif ++ ++ifeq ($(CONFIG_PLATFORM_MIPS_JZ4760), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_MINIMAL_MEMORY_USAGE ++ARCH ?= mips ++CROSS_COMPILE ?= /mnt/sdb5/Ingenic/Umido/mips-4.3/bin/mips-linux-gnu- ++KSRC ?= /mnt/sdb5/Ingenic/Umido/kernel ++endif ++ ++#Add setting for MN10300 ++ifeq ($(CONFIG_PLATFORM_MN10300), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MN10300 ++ARCH := mn10300 ++CROSS_COMPILE := mn10300-linux- ++KVER := 2.6.32.2 ++KSRC := /home/winuser/work/Plat_sLD2T_V3010/usr/src/linux-2.6.32.2 ++INSTALL_PREFIX := ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_SUNxI), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ARM_SUNxI ++ARCH := arm ++CROSS_COMPILE := arm-none-linux-gnueabi- ++KVER := 3.0.8 ++#KSRC:= ../lichee/linux-3.0/ ++endif ++ ++ifeq ($(CONFIG_PLATFORM_ARM_SUN6I), y) ++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN ++EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN6I ++EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX ++EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT ++# default setting for Android 4.1, 4.2 ++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE ++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT ++EXTRA_CFLAGS += -DCONFIG_P2P_IPS ++ARCH := arm ++CROSS_COMPILE := arm-none-linux-gnueabi- ++KVER := 3.3.0 ++#KSRC:= ../lichee/linux-3.3/ ++endif ++ ++ifneq ($(USER_MODULE_NAME),) ++MODULE_NAME := $(USER_MODULE_NAME) ++endif ++ ++ifeq ($(CONFIG_MP_INCLUDED), y) ++MODULE_NAME := $(MODULE_NAME)_mp ++EXTRA_CFLAGS += -DCONFIG_MP_INCLUDED ++endif ++ ++ ++ifneq ($(KERNELRELEASE),) ++ ++ ++rtk_core := core/rtw_cmd.o \ ++ core/rtw_security.o \ ++ core/rtw_debug.o \ ++ core/rtw_io.o \ ++ core/rtw_ioctl_query.o \ ++ core/rtw_ioctl_set.o \ ++ core/rtw_ieee80211.o \ ++ core/rtw_mlme.o \ ++ core/rtw_mlme_ext.o \ ++ core/rtw_wlan_util.o \ ++ core/rtw_pwrctrl.o \ ++ core/rtw_rf.o \ ++ core/rtw_recv.o \ ++ core/rtw_sta_mgt.o \ ++ core/rtw_ap.o \ ++ core/rtw_xmit.o \ ++ core/rtw_p2p.o \ ++ core/rtw_tdls.o \ ++ core/rtw_br_ext.o \ ++ core/rtw_iol.o \ ++ core/rtw_sreset.o ++ ++$(MODULE_NAME)-y += $(rtk_core) ++ ++$(MODULE_NAME)-$(CONFIG_INTEL_WIDI) += core/rtw_intel_widi.o ++ ++$(MODULE_NAME)-y += core/efuse/rtw_efuse.o ++ ++$(MODULE_NAME)-y += $(_HAL_INTFS_FILES) ++ ++$(MODULE_NAME)-y += $(_OS_INTFS_FILES) ++ ++$(MODULE_NAME)-$(CONFIG_MP_INCLUDED) += core/rtw_mp.o \ ++ core/rtw_mp_ioctl.o ++ ++obj-$(CONFIG_RTL8192CU) := $(MODULE_NAME).o ++ ++else ++ ++export CONFIG_RTL8192CU = m ++ ++all: modules ++ ++modules: ++ $(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C $(KSRC) M=$(shell pwd) modules ++ ++strip: ++ $(CROSS_COMPILE)strip $(MODULE_NAME).ko --strip-unneeded ++ ++install: ++ install -p -m 644 $(MODULE_NAME).ko $(MODDESTDIR) ++ /sbin/depmod -a ${KVER} ++ ++uninstall: ++ rm -f $(MODDESTDIR)/$(MODULE_NAME).ko ++ /sbin/depmod -a ${KVER} ++ ++ ++config_r: ++ @echo "make config" ++ /bin/bash script/Configure script/config.in ++ ++.PHONY: modules clean ++ ++clean: ++ rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~ ++ rm .tmp_versions -fr ; rm Module.symvers -fr ++ rm -fr Module.markers ; rm -fr modules.order ++ cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd hal/$(RTL871X)/$(HCI_NAME) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd hal/$(RTL871X) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++ cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko ++endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/clean b/drivers/net/wireless/realtek/rtl8192cu/clean +new file mode 100755 +index 000000000000..87664218b889 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/clean +@@ -0,0 +1,5 @@ ++#!/bin/bash ++rmmod 8192cu ++rmmod 8192ce ++rmmod 8192du ++rmmod 8192de +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/efuse/rtw_efuse.c b/drivers/net/wireless/realtek/rtl8192cu/core/efuse/rtw_efuse.c +new file mode 100644 +index 000000000000..c7f2b6705105 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/efuse/rtw_efuse.c +@@ -0,0 +1,1145 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_EFUSE_C_ ++ ++#include ++#include ++#include ++ ++#include ++ ++ ++ ++/*------------------------Define local variable------------------------------*/ ++u8 fakeEfuseBank=0; ++u32 fakeEfuseUsedBytes=0; ++u8 fakeEfuseContent[EFUSE_MAX_HW_SIZE]={0}; ++u8 fakeEfuseInitMap[EFUSE_MAX_MAP_LEN]={0}; ++u8 fakeEfuseModifiedMap[EFUSE_MAX_MAP_LEN]={0}; ++ ++u32 BTEfuseUsedBytes=0; ++u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; ++u8 BTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN]={0}; ++u8 BTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN]={0}; ++ ++u32 fakeBTEfuseUsedBytes=0; ++u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; ++u8 fakeBTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN]={0}; ++u8 fakeBTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN]={0}; ++/*------------------------Define local variable------------------------------*/ ++ ++//------------------------------------------------------------------------------ ++#define REG_EFUSE_CTRL 0x0030 ++#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control. ++//------------------------------------------------------------------------------ ++ ++BOOLEAN ++Efuse_Read1ByteFromFakeContent( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN OUT u8 *Value ); ++BOOLEAN ++Efuse_Read1ByteFromFakeContent( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN OUT u8 *Value ) ++{ ++ if(Offset >= EFUSE_MAX_HW_SIZE) ++ { ++ return _FALSE; ++ } ++ //DbgPrint("Read fake content, offset = %d\n", Offset); ++ if(fakeEfuseBank == 0) ++ *Value = fakeEfuseContent[Offset]; ++ else ++ *Value = fakeBTEfuseContent[fakeEfuseBank-1][Offset]; ++ return _TRUE; ++} ++ ++BOOLEAN ++Efuse_Write1ByteToFakeContent( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u8 Value ); ++BOOLEAN ++Efuse_Write1ByteToFakeContent( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u8 Value ) ++{ ++ if(Offset >= EFUSE_MAX_HW_SIZE) ++ { ++ return _FALSE; ++ } ++ if(fakeEfuseBank == 0) ++ fakeEfuseContent[Offset] = Value; ++ else ++ { ++ fakeBTEfuseContent[fakeEfuseBank-1][Offset] = Value; ++ } ++ return _TRUE; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: Efuse_PowerSwitch ++ * ++ * Overview: When we want to enable write operation, we should change to ++ * pwr on state. When we stop write, we should switch to 500k mode ++ * and disable LDO 2.5V. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/17/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++Efuse_PowerSwitch( ++ IN PADAPTER pAdapter, ++ IN u8 bWrite, ++ IN u8 PwrState) ++{ ++ pAdapter->HalFunc.EfusePowerSwitch(pAdapter, bWrite, PwrState); ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: efuse_GetCurrentSize ++ * ++ * Overview: Get current efuse size!!! ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/16/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++u16 ++Efuse_GetCurrentSize( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN BOOLEAN bPseudoTest) ++{ ++ u16 ret=0; ++ ++ ret = pAdapter->HalFunc.EfuseGetCurrentSize(pAdapter, efuseType, bPseudoTest); ++ ++ return ret; ++} ++ ++/* 11/16/2008 MH Add description. Get current efuse area enabled word!!. */ ++u8 ++Efuse_CalculateWordCnts(IN u8 word_en) ++{ ++ u8 word_cnts = 0; ++ if(!(word_en & BIT(0))) word_cnts++; // 0 : write enable ++ if(!(word_en & BIT(1))) word_cnts++; ++ if(!(word_en & BIT(2))) word_cnts++; ++ if(!(word_en & BIT(3))) word_cnts++; ++ return word_cnts; ++} ++ ++// ++// Description: ++// Execute E-Fuse read byte operation. ++// Refered from SD1 Richard. ++// ++// Assumption: ++// 1. Boot from E-Fuse and successfully auto-load. ++// 2. PASSIVE_LEVEL (USB interface) ++// ++// Created by Roger, 2008.10.21. ++// ++VOID ++ReadEFuseByte( ++ PADAPTER Adapter, ++ u16 _offset, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest) ++{ ++ u32 value32; ++ u8 readbyte; ++ u16 retry; ++ //u32 start=rtw_get_current_time(); ++ ++ if(bPseudoTest) ++ { ++ Efuse_Read1ByteFromFakeContent(Adapter, _offset, pbuf); ++ return; ++ } ++ ++ //Write Address ++ rtw_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff)); ++ readbyte = rtw_read8(Adapter, EFUSE_CTRL+2); ++ rtw_write8(Adapter, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc)); ++ ++ //Write bit 32 0 ++ readbyte = rtw_read8(Adapter, EFUSE_CTRL+3); ++ rtw_write8(Adapter, EFUSE_CTRL+3, (readbyte & 0x7f)); ++ ++ //Check bit 32 read-ready ++ retry = 0; ++ value32 = rtw_read32(Adapter, EFUSE_CTRL); ++ //while(!(((value32 >> 24) & 0xff) & 0x80) && (retry<10)) ++ while(!(((value32 >> 24) & 0xff) & 0x80) && (retry<10000)) ++ { ++ value32 = rtw_read32(Adapter, EFUSE_CTRL); ++ retry++; ++ } ++ ++ // 20100205 Joseph: Add delay suggested by SD1 Victor. ++ // This fix the problem that Efuse read error in high temperature condition. ++ // Designer says that there shall be some delay after ready bit is set, or the ++ // result will always stay on last data we read. ++ rtw_udelay_os(50); ++ value32 = rtw_read32(Adapter, EFUSE_CTRL); ++ ++ *pbuf = (u8)(value32 & 0xff); ++ //DBG_871X("ReadEFuseByte _offset:%08u, in %d ms\n",_offset ,rtw_get_passing_time_ms(start)); ++ ++} ++ ++ ++// ++// Description: ++// 1. Execute E-Fuse read byte operation according as map offset and ++// save to E-Fuse table. ++// 2. Refered from SD1 Richard. ++// ++// Assumption: ++// 1. Boot from E-Fuse and successfully auto-load. ++// 2. PASSIVE_LEVEL (USB interface) ++// ++// Created by Roger, 2008.10.21. ++// ++// 2008/12/12 MH 1. Reorganize code flow and reserve bytes. and add description. ++// 2. Add efuse utilization collect. ++// 2008/12/22 MH Read Efuse must check if we write section 1 data again!!! Sec1 ++// write addr must be after sec5. ++// ++ ++VOID ++efuse_ReadEFuse( ++ PADAPTER Adapter, ++ u8 efuseType, ++ u16 _offset, ++ u16 _size_byte, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest ++ ); ++VOID ++efuse_ReadEFuse( ++ PADAPTER Adapter, ++ u8 efuseType, ++ u16 _offset, ++ u16 _size_byte, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ Adapter->HalFunc.ReadEFuse(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest); ++} ++ ++VOID ++EFUSE_GetEfuseDefinition( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u8 type, ++ OUT void *pOut, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ pAdapter->HalFunc.EFUSEGetEfuseDefinition(pAdapter, efuseType, type, pOut, bPseudoTest); ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: EFUSE_Read1Byte ++ * ++ * Overview: Copy from WMAC fot EFUSE read 1 byte. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 09/23/2008 MHC Copy from WMAC. ++ * ++ *---------------------------------------------------------------------------*/ ++u8 ++EFUSE_Read1Byte( ++ IN PADAPTER Adapter, ++ IN u16 Address) ++{ ++ u8 data; ++ u8 Bytetemp = {0x00}; ++ u8 temp = {0x00}; ++ u32 k=0; ++ u16 contentLen=0; ++ ++ EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI , TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&contentLen, _FALSE); ++ ++ if (Address < contentLen) //E-fuse 512Byte ++ { ++ //Write E-fuse Register address bit0~7 ++ temp = Address & 0xFF; ++ rtw_write8(Adapter, EFUSE_CTRL+1, temp); ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2); ++ //Write E-fuse Register address bit8~9 ++ temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC); ++ rtw_write8(Adapter, EFUSE_CTRL+2, temp); ++ ++ //Write 0x30[31]=0 ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ temp = Bytetemp & 0x7F; ++ rtw_write8(Adapter, EFUSE_CTRL+3, temp); ++ ++ //Wait Write-ready (0x30[31]=1) ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ while(!(Bytetemp & 0x80)) ++ { ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ k++; ++ if(k==1000) ++ { ++ k=0; ++ break; ++ } ++ } ++ data=rtw_read8(Adapter, EFUSE_CTRL); ++ return data; ++ } ++ else ++ return 0xFF; ++ ++}/* EFUSE_Read1Byte */ ++ ++/*----------------------------------------------------------------------------- ++ * Function: EFUSE_Write1Byte ++ * ++ * Overview: Copy from WMAC fot EFUSE write 1 byte. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 09/23/2008 MHC Copy from WMAC. ++ * ++ *---------------------------------------------------------------------------*/ ++ ++void ++EFUSE_Write1Byte( ++ IN PADAPTER Adapter, ++ IN u16 Address, ++ IN u8 Value); ++void ++EFUSE_Write1Byte( ++ IN PADAPTER Adapter, ++ IN u16 Address, ++ IN u8 Value) ++{ ++ u8 Bytetemp = {0x00}; ++ u8 temp = {0x00}; ++ u32 k=0; ++ u16 contentLen=0; ++ ++ //RT_TRACE(COMP_EFUSE, DBG_LOUD, ("Addr=%x Data =%x\n", Address, Value)); ++ EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI , TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&contentLen, _FALSE); ++ ++ if( Address < contentLen) //E-fuse 512Byte ++ { ++ rtw_write8(Adapter, EFUSE_CTRL, Value); ++ ++ //Write E-fuse Register address bit0~7 ++ temp = Address & 0xFF; ++ rtw_write8(Adapter, EFUSE_CTRL+1, temp); ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2); ++ ++ //Write E-fuse Register address bit8~9 ++ temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC); ++ rtw_write8(Adapter, EFUSE_CTRL+2, temp); ++ ++ //Write 0x30[31]=1 ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ temp = Bytetemp | 0x80; ++ rtw_write8(Adapter, EFUSE_CTRL+3, temp); ++ ++ //Wait Write-ready (0x30[31]=0) ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ while(Bytetemp & 0x80) ++ { ++ Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); ++ k++; ++ if(k==100) ++ { ++ k=0; ++ break; ++ } ++ } ++ } ++}/* EFUSE_Write1Byte */ ++ ++/* 11/16/2008 MH Read one byte from real Efuse. */ ++u8 ++efuse_OneByteRead( ++ IN PADAPTER pAdapter, ++ IN u16 addr, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 tmpidx = 0; ++ u8 bResult; ++ ++ if(bPseudoTest) ++ { ++ bResult = Efuse_Read1ByteFromFakeContent(pAdapter, addr, data); ++ return bResult; ++ } ++ // -----------------e-fuse reg ctrl --------------------------------- ++ //address ++ rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff)); ++ rtw_write8(pAdapter, EFUSE_CTRL+2, ((u8)((addr>>8) &0x03) ) | ++ (rtw_read8(pAdapter, EFUSE_CTRL+2)&0xFC )); ++ ++ rtw_write8(pAdapter, EFUSE_CTRL+3, 0x72);//read cmd ++ ++ while(!(0x80 &rtw_read8(pAdapter, EFUSE_CTRL+3))&&(tmpidx<100)) ++ { ++ tmpidx++; ++ } ++ if(tmpidx<100) ++ { ++ *data=rtw_read8(pAdapter, EFUSE_CTRL); ++ bResult = _TRUE; ++ } ++ else ++ { ++ *data = 0xff; ++ bResult = _FALSE; ++ } ++ return bResult; ++} ++ ++/* 11/16/2008 MH Write one byte to reald Efuse. */ ++u8 ++efuse_OneByteWrite( ++ IN PADAPTER pAdapter, ++ IN u16 addr, ++ IN u8 data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 tmpidx = 0; ++ u8 bResult; ++ ++ if(bPseudoTest) ++ { ++ bResult = Efuse_Write1ByteToFakeContent(pAdapter, addr, data); ++ return bResult; ++ } ++ //RT_TRACE(COMP_EFUSE, DBG_LOUD, ("Addr = %x Data=%x\n", addr, data)); ++ ++ //return 0; ++ ++ // -----------------e-fuse reg ctrl --------------------------------- ++ //address ++ rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff)); ++ rtw_write8(pAdapter, EFUSE_CTRL+2, ++ (rtw_read8(pAdapter, EFUSE_CTRL+2)&0xFC )|(u8)((addr>>8)&0x03) ); ++ rtw_write8(pAdapter, EFUSE_CTRL, data);//data ++ ++ rtw_write8(pAdapter, EFUSE_CTRL+3, 0xF2);//write cmd ++ ++ while((0x80 & rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx<100) ){ ++ tmpidx++; ++ } ++ ++ if(tmpidx<100) ++ { ++ bResult = _TRUE; ++ } ++ else ++ { ++ bResult = _FALSE; ++ } ++ ++ return bResult; ++} ++ ++int ++Efuse_PgPacketRead( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret=0; ++ ++ ret = pAdapter->HalFunc.Efuse_PgPacketRead(pAdapter, offset, data, bPseudoTest); ++ ++ return ret; ++} ++ ++int ++Efuse_PgPacketWrite(IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret; ++ ++ ret = pAdapter->HalFunc.Efuse_PgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest); ++ ++ return ret; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: efuse_WordEnableDataRead ++ * ++ * Overview: Read allowed word in current efuse section data. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/16/2008 MHC Create Version 0. ++ * 11/21/2008 MHC Fix Write bug when we only enable late word. ++ * ++ *---------------------------------------------------------------------------*/ ++void ++efuse_WordEnableDataRead(IN u8 word_en, ++ IN u8 *sourdata, ++ IN u8 *targetdata) ++{ ++ if (!(word_en&BIT(0))) ++ { ++ targetdata[0] = sourdata[0]; ++ targetdata[1] = sourdata[1]; ++ } ++ if (!(word_en&BIT(1))) ++ { ++ targetdata[2] = sourdata[2]; ++ targetdata[3] = sourdata[3]; ++ } ++ if (!(word_en&BIT(2))) ++ { ++ targetdata[4] = sourdata[4]; ++ targetdata[5] = sourdata[5]; ++ } ++ if (!(word_en&BIT(3))) ++ { ++ targetdata[6] = sourdata[6]; ++ targetdata[7] = sourdata[7]; ++ } ++} ++ ++ ++u8 ++Efuse_WordEnableDataWrite( IN PADAPTER pAdapter, ++ IN u16 efuse_addr, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 ret=0; ++ ++ ret = pAdapter->HalFunc.Efuse_WordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest); ++ ++ return ret; ++} ++ ++static u8 efuse_read8(PADAPTER padapter, u16 address, u8 *value) ++{ ++ return efuse_OneByteRead(padapter,address, value, _FALSE); ++} ++ ++static u8 efuse_write8(PADAPTER padapter, u16 address, u8 *value) ++{ ++ return efuse_OneByteWrite(padapter,address, *value, _FALSE); ++} ++ ++/* ++ * read/wirte raw efuse data ++ */ ++u8 rtw_efuse_access(PADAPTER padapter, u8 bWrite, u16 start_addr, u16 cnts, u8 *data) ++{ ++ int i = 0; ++ u16 real_content_len = 0, max_available_size = 0; ++ u8 res = _FAIL ; ++ u8 (*rw8)(PADAPTER, u16, u8*); ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&real_content_len, _FALSE); ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if (start_addr > real_content_len) ++ return _FAIL; ++ ++ if (_TRUE == bWrite) { ++ if ((start_addr + cnts) > max_available_size) ++ return _FAIL; ++ rw8 = &efuse_write8; ++ } else ++ rw8 = &efuse_read8; ++ ++ Efuse_PowerSwitch(padapter, bWrite, _TRUE); ++ ++ // e-fuse one byte read / write ++ for (i = 0; i < cnts; i++) { ++ if (start_addr >= real_content_len) { ++ res = _FAIL; ++ break; ++ } ++ ++ res = rw8(padapter, start_addr++, data++); ++ if (_FAIL == res) break; ++ } ++ ++ Efuse_PowerSwitch(padapter, bWrite, _FALSE); ++ ++ return res; ++} ++//------------------------------------------------------------------------------ ++u16 efuse_GetMaxSize(PADAPTER padapter) ++{ ++ u16 max_size; ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI , TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_size, _FALSE); ++ return max_size; ++} ++//------------------------------------------------------------------------------ ++u8 efuse_GetCurrentSize(PADAPTER padapter, u16 *size) ++{ ++ Efuse_PowerSwitch(padapter, _FALSE, _TRUE); ++ *size = Efuse_GetCurrentSize(padapter, EFUSE_WIFI, _FALSE); ++ Efuse_PowerSwitch(padapter, _FALSE, _FALSE); ++ ++ return _SUCCESS; ++} ++//------------------------------------------------------------------------------ ++u8 rtw_efuse_map_read(PADAPTER padapter, u16 addr, u16 cnts, u8 *data) ++{ ++ u16 mapLen=0; ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE); ++ ++ if ((addr + cnts) > mapLen) ++ return _FAIL; ++ ++ Efuse_PowerSwitch(padapter, _FALSE, _TRUE); ++ ++ efuse_ReadEFuse(padapter, EFUSE_WIFI, addr, cnts, data, _FALSE); ++ ++ Efuse_PowerSwitch(padapter, _FALSE, _FALSE); ++ ++ return _SUCCESS; ++} ++//------------------------------------------------------------------------------ ++u8 rtw_efuse_map_write(PADAPTER padapter, u16 addr, u16 cnts, u8 *data) ++{ ++ u8 offset, word_en; ++ u8 *map; ++ u8 newdata[PGPKT_DATA_SIZE]; ++ s32 i, j, idx; ++ u8 ret = _SUCCESS; ++ u16 mapLen=0; ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE); ++ ++ if ((addr + cnts) > mapLen) ++ return _FAIL; ++ ++ map = rtw_zmalloc(mapLen); ++ if(map == NULL){ ++ return _FAIL; ++ } ++ ++ ret = rtw_efuse_map_read(padapter, 0, mapLen, map); ++ if (ret == _FAIL) goto exit; ++ ++ Efuse_PowerSwitch(padapter, _TRUE, _TRUE); ++ ++ offset = (addr >> 3); ++ word_en = 0xF; ++ _rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE); ++ i = addr & 0x7; // index of one package ++ j = 0; // index of new package ++ idx = 0; // data index ++ ++ if (i & 0x1) { ++ // odd start ++ if (data[idx] != map[addr+idx]) { ++ word_en &= ~BIT(i >> 1); ++ newdata[i-1] = map[addr+idx-1]; ++ newdata[i] = data[idx]; ++ } ++ i++; ++ idx++; ++ } ++ do { ++ for (; i < PGPKT_DATA_SIZE; i += 2) ++ { ++ if (cnts == idx) break; ++ if ((cnts - idx) == 1) { ++ if (data[idx] != map[addr+idx]) { ++ word_en &= ~BIT(i >> 1); ++ newdata[i] = data[idx]; ++ newdata[i+1] = map[addr+idx+1]; ++ } ++ idx++; ++ break; ++ } else { ++ if ((data[idx] != map[addr+idx]) || ++ (data[idx+1] != map[addr+idx+1])) ++ { ++ word_en &= ~BIT(i >> 1); ++ newdata[i] = data[idx]; ++ newdata[i+1] = data[idx + 1]; ++ } ++ idx += 2; ++ } ++ if (idx == cnts) break; ++ } ++ ++ if (word_en != 0xF) { ++ ret = Efuse_PgPacketWrite(padapter, offset, word_en, newdata, _FALSE); ++ DBG_871X("offset=%x \n",offset); ++ DBG_871X("word_en=%x \n",word_en); ++ ++ for(i=0;iefuse_eeprom_data[Offset]; ++ ++} // EFUSE_ShadowRead1Byte ++ ++//---------------Read Two Bytes ++static VOID ++efuse_ShadowRead2Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN OUT u16 *Value) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ ++ *Value = pEEPROM->efuse_eeprom_data[Offset]; ++ *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; ++ ++} // EFUSE_ShadowRead2Byte ++ ++//---------------Read Four Bytes ++static VOID ++efuse_ShadowRead4Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN OUT u32 *Value) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ ++ *Value = pEEPROM->efuse_eeprom_data[Offset]; ++ *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; ++ *Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16; ++ *Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24; ++ ++} // efuse_ShadowRead4Byte ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: efuse_ShadowWrite1Byte ++ * efuse_ShadowWrite2Byte ++ * efuse_ShadowWrite4Byte ++ * ++ * Overview: Write efuse modify map by one/two/four byte. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/12/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++#ifdef PLATFORM ++static VOID ++efuse_ShadowWrite1Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u8 Value); ++#endif //PLATFORM ++static VOID ++efuse_ShadowWrite1Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u8 Value) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ ++ pEEPROM->efuse_eeprom_data[Offset] = Value; ++ ++} // efuse_ShadowWrite1Byte ++ ++//---------------Write Two Bytes ++static VOID ++efuse_ShadowWrite2Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u16 Value) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ ++ pEEPROM->efuse_eeprom_data[Offset] = Value&0x00FF; ++ pEEPROM->efuse_eeprom_data[Offset+1] = Value>>8; ++ ++} // efuse_ShadowWrite1Byte ++ ++//---------------Write Four Bytes ++static VOID ++efuse_ShadowWrite4Byte( ++ IN PADAPTER pAdapter, ++ IN u16 Offset, ++ IN u32 Value) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ ++ pEEPROM->efuse_eeprom_data[Offset] = (u8)(Value&0x000000FF); ++ pEEPROM->efuse_eeprom_data[Offset+1] = (u8)((Value>>8)&0x0000FF); ++ pEEPROM->efuse_eeprom_data[Offset+2] = (u8)((Value>>16)&0x00FF); ++ pEEPROM->efuse_eeprom_data[Offset+3] = (u8)((Value>>24)&0xFF); ++ ++} // efuse_ShadowWrite1Byte ++ ++/*----------------------------------------------------------------------------- ++ * Function: EFUSE_ShadowMapUpdate ++ * ++ * Overview: Transfer current EFUSE content to shadow init and modify map. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/13/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++void EFUSE_ShadowMapUpdate( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN BOOLEAN bPseudoTest) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ u16 mapLen=0; ++ ++ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, bPseudoTest); ++ ++ if (pEEPROM->bautoload_fail_flag == _TRUE) ++ { ++ _rtw_memset(pEEPROM->efuse_eeprom_data, 0xFF, mapLen); ++ } ++ else ++ { ++ #ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++ if(_SUCCESS != retriveAdaptorInfoFile(pAdapter->registrypriv.adaptor_info_caching_file_path, pEEPROM)) { ++ #endif ++ ++ Efuse_ReadAllMap(pAdapter, efuseType, pEEPROM->efuse_eeprom_data, bPseudoTest); ++ ++ #ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++ storeAdaptorInfoFile(pAdapter->registrypriv.adaptor_info_caching_file_path, pEEPROM); ++ } ++ #endif ++ } ++ ++ //PlatformMoveMemory((PVOID)&pHalData->EfuseMap[EFUSE_MODIFY_MAP][0], ++ //(PVOID)&pHalData->EfuseMap[EFUSE_INIT_MAP][0], mapLen); ++}// EFUSE_ShadowMapUpdate ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: EFUSE_ShadowRead ++ * ++ * Overview: Read from efuse init map !!!!! ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/12/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++void ++EFUSE_ShadowRead( ++ IN PADAPTER pAdapter, ++ IN u8 Type, ++ IN u16 Offset, ++ IN OUT u32 *Value ) ++{ ++ if (Type == 1) ++ efuse_ShadowRead1Byte(pAdapter, Offset, (u8 *)Value); ++ else if (Type == 2) ++ efuse_ShadowRead2Byte(pAdapter, Offset, (u16 *)Value); ++ else if (Type == 4) ++ efuse_ShadowRead4Byte(pAdapter, Offset, (u32 *)Value); ++ ++} // EFUSE_ShadowRead ++ ++/*----------------------------------------------------------------------------- ++ * Function: EFUSE_ShadowWrite ++ * ++ * Overview: Write efuse modify map for later update operation to use!!!!! ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/12/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++EFUSE_ShadowWrite( ++ IN PADAPTER pAdapter, ++ IN u8 Type, ++ IN u16 Offset, ++ IN OUT u32 Value); ++VOID ++EFUSE_ShadowWrite( ++ IN PADAPTER pAdapter, ++ IN u8 Type, ++ IN u16 Offset, ++ IN OUT u32 Value) ++{ ++#if (MP_DRIVER == 0) ++ return; ++#endif ++ ++ if (Type == 1) ++ efuse_ShadowWrite1Byte(pAdapter, Offset, (u8)Value); ++ else if (Type == 2) ++ efuse_ShadowWrite2Byte(pAdapter, Offset, (u16)Value); ++ else if (Type == 4) ++ efuse_ShadowWrite4Byte(pAdapter, Offset, (u32)Value); ++ ++} // EFUSE_ShadowWrite ++ ++VOID ++Efuse_InitSomeVar( ++ IN PADAPTER pAdapter ++ ); ++VOID ++Efuse_InitSomeVar( ++ IN PADAPTER pAdapter ++ ) ++{ ++ u8 i; ++ ++ _rtw_memset((PVOID)&fakeEfuseContent[0], 0xff, EFUSE_MAX_HW_SIZE); ++ _rtw_memset((PVOID)&fakeEfuseInitMap[0], 0xff, EFUSE_MAX_MAP_LEN); ++ _rtw_memset((PVOID)&fakeEfuseModifiedMap[0], 0xff, EFUSE_MAX_MAP_LEN); ++ ++ for(i=0; i ++ ++ int isAdaptorInfoFileValid(void) ++{ ++ return _TRUE; ++} ++ ++int storeAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv) ++{ ++ int ret =_SUCCESS; ++ ++ if(path && eeprom_priv) { ++ ret = rtw_store_to_file(path, eeprom_priv->efuse_eeprom_data, EEPROM_MAX_SIZE); ++ if(ret == EEPROM_MAX_SIZE) ++ ret = _SUCCESS; ++ else ++ ret = _FAIL; ++ } else { ++ DBG_871X("%s NULL pointer\n",__FUNCTION__); ++ ret = _FAIL; ++ } ++ return ret; ++} ++ ++int retriveAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv) ++{ ++ int ret = _SUCCESS; ++ mm_segment_t oldfs; ++ struct file *fp; ++ ++ if(path && eeprom_priv) { ++ ++ ret = rtw_retrive_from_file(path, eeprom_priv->efuse_eeprom_data, EEPROM_MAX_SIZE); ++ ++ if(ret == EEPROM_MAX_SIZE) ++ ret = _SUCCESS; ++ else ++ ret = _FAIL; ++ ++ #if 0 ++ if(isAdaptorInfoFileValid()) { ++ return 0; ++ } else { ++ return _FAIL; ++ } ++ #endif ++ ++ } else { ++ DBG_871X("%s NULL pointer\n",__FUNCTION__); ++ ret = _FAIL; ++ } ++ return ret; ++} ++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE ++#endif //PLATFORM_LINUX +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c +new file mode 100644 +index 000000000000..cd7e5f30a568 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c +@@ -0,0 +1,2939 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_AP_C_ ++ ++#include ++#include ++#include ++#include ++ ++ ++#ifdef CONFIG_AP_MODE ++ ++extern unsigned char RTW_WPA_OUI[]; ++extern unsigned char WMM_OUI[]; ++extern unsigned char WPS_OUI[]; ++extern unsigned char P2P_OUI[]; ++extern unsigned char WFD_OUI[]; ++ ++void init_mlme_ap_info(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ ++ ++ _rtw_spinlock_init(&pmlmepriv->bcn_update_lock); ++ ++ //for ACL ++ _rtw_init_queue(&pacl_list->acl_node_q); ++ ++ //pmlmeext->bstart_bss = _FALSE; ++ ++ start_ap_mode(padapter); ++} ++ ++void free_mlme_ap_info(_adapter *padapter) ++{ ++ _irqL irqL; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //stop_ap_mode(padapter); ++ ++ pmlmepriv->update_bcn = _FALSE; ++ pmlmeext->bstart_bss = _FALSE; ++ ++ rtw_sta_flush(padapter); ++ ++ pmlmeinfo->state = _HW_STATE_NOLINK_; ++ ++ //free_assoc_sta_resources ++ rtw_free_all_stainfo(padapter); ++ ++ //free bc/mc sta_info ++ psta = rtw_get_bcmc_stainfo(padapter); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(padapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ ++ _rtw_spinlock_free(&pmlmepriv->bcn_update_lock); ++ ++} ++ ++static void update_BCNTIM(_adapter *padapter) ++{ ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork_mlmeext = &(pmlmeinfo->network); ++ unsigned char *pie = pnetwork_mlmeext->IEs; ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ //update TIM IE ++ //if(pstapriv->tim_bitmap) ++ if(_TRUE) ++ { ++ u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL; ++ u16 tim_bitmap_le; ++ uint offset, tmp_len, tim_ielen, tim_ie_offset, remainder_ielen; ++ ++ tim_bitmap_le = cpu_to_le16(pstapriv->tim_bitmap); ++ ++ p = rtw_get_ie(pie + _FIXED_IE_LENGTH_, _TIM_IE_, &tim_ielen, pnetwork_mlmeext->IELength - _FIXED_IE_LENGTH_); ++ if (p != NULL && tim_ielen>0) ++ { ++ tim_ielen += 2; ++ ++ premainder_ie = p+tim_ielen; ++ ++ tim_ie_offset = (sint)(p -pie); ++ ++ remainder_ielen = pnetwork_mlmeext->IELength - tim_ie_offset - tim_ielen; ++ ++ //append TIM IE from dst_ie offset ++ dst_ie = p; ++ } ++ else ++ { ++ tim_ielen = 0; ++ ++ //calucate head_len ++ offset = _FIXED_IE_LENGTH_; ++ ++ /* get ssid_ie len */ ++ p = rtw_get_ie(pie + _BEACON_IE_OFFSET_, _SSID_IE_, &tmp_len, (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_)); ++ if (p != NULL) ++ offset += tmp_len+2; ++ ++ // get supported rates len ++ p = rtw_get_ie(pie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &tmp_len, (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_)); ++ if (p != NULL) ++ { ++ offset += tmp_len+2; ++ } ++ ++ //DS Parameter Set IE, len=3 ++ offset += 3; ++ ++ premainder_ie = pie + offset; ++ ++ remainder_ielen = pnetwork_mlmeext->IELength - offset - tim_ielen; ++ ++ //append TIM IE from offset ++ dst_ie = pie + offset; ++ ++ } ++ ++ ++ if(remainder_ielen>0) ++ { ++ pbackup_remainder_ie = rtw_malloc(remainder_ielen); ++ if(pbackup_remainder_ie && premainder_ie) ++ _rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen); ++ } ++ ++ *dst_ie++=_TIM_IE_; ++ ++ if((pstapriv->tim_bitmap&0xff00) && (pstapriv->tim_bitmap&0x00fc)) ++ tim_ielen = 5; ++ else ++ tim_ielen = 4; ++ ++ *dst_ie++= tim_ielen; ++ ++ *dst_ie++=0;//DTIM count ++ *dst_ie++=1;//DTIM peroid ++ ++ if(pstapriv->tim_bitmap&BIT(0))//for bc/mc frames ++ *dst_ie++ = BIT(0);//bitmap ctrl ++ else ++ *dst_ie++ = 0; ++ ++ if(tim_ielen==4) ++ { ++ *dst_ie++ = *(u8*)&tim_bitmap_le; ++ } ++ else if(tim_ielen==5) ++ { ++ _rtw_memcpy(dst_ie, &tim_bitmap_le, 2); ++ dst_ie+=2; ++ } ++ ++ //copy remainder IE ++ if(pbackup_remainder_ie) ++ { ++ _rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen); ++ ++ rtw_mfree(pbackup_remainder_ie, remainder_ielen); ++ } ++ ++ offset = (uint)(dst_ie - pie); ++ pnetwork_mlmeext->IELength = offset + remainder_ielen; ++ ++ } ++ ++#ifndef CONFIG_INTERRUPT_BASED_TXBCN ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) ++ set_tx_beacon_cmd(padapter); ++#endif ++#endif //!CONFIG_INTERRUPT_BASED_TXBCN ++ ++ ++} ++ ++void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *data, u8 len) ++{ ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 bmatch = _FALSE; ++ u8 *pie = pnetwork->IEs; ++ u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL; ++ u32 i, offset, ielen, ie_offset, remainder_ielen = 0; ++ ++ for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pnetwork->IELength;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pnetwork->IEs + i); ++ ++ if (pIE->ElementID > index) ++ { ++ break; ++ } ++ else if(pIE->ElementID == index) // already exist the same IE ++ { ++ p = (u8 *)pIE; ++ ielen = pIE->Length; ++ bmatch = _TRUE; ++ break; ++ } ++ ++ p = (u8 *)pIE; ++ ielen = pIE->Length; ++ i += (pIE->Length + 2); ++ } ++ ++ if (p != NULL && ielen>0) ++ { ++ ielen += 2; ++ ++ premainder_ie = p+ielen; ++ ++ ie_offset = (sint)(p -pie); ++ ++ remainder_ielen = pnetwork->IELength - ie_offset - ielen; ++ ++ if(bmatch) ++ dst_ie = p; ++ else ++ dst_ie = (p+ielen); ++ } ++ ++ if(remainder_ielen>0) ++ { ++ pbackup_remainder_ie = rtw_malloc(remainder_ielen); ++ if(pbackup_remainder_ie && premainder_ie) ++ _rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen); ++ } ++ ++ *dst_ie++=index; ++ *dst_ie++=len; ++ ++ _rtw_memcpy(dst_ie, data, len); ++ dst_ie+=len; ++ ++ //copy remainder IE ++ if(pbackup_remainder_ie) ++ { ++ _rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen); ++ ++ rtw_mfree(pbackup_remainder_ie, remainder_ielen); ++ } ++ ++ offset = (uint)(dst_ie - pie); ++ pnetwork->IELength = offset + remainder_ielen; ++} ++ ++void rtw_remove_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index) ++{ ++ u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL; ++ uint offset, ielen, ie_offset, remainder_ielen = 0; ++ u8 *pie = pnetwork->IEs; ++ ++ p = rtw_get_ie(pie + _FIXED_IE_LENGTH_, index, &ielen, pnetwork->IELength - _FIXED_IE_LENGTH_); ++ if (p != NULL && ielen>0) ++ { ++ ielen += 2; ++ ++ premainder_ie = p+ielen; ++ ++ ie_offset = (sint)(p -pie); ++ ++ remainder_ielen = pnetwork->IELength - ie_offset - ielen; ++ ++ dst_ie = p; ++ } ++ else { ++ return; ++ } ++ ++ if(remainder_ielen>0) ++ { ++ pbackup_remainder_ie = rtw_malloc(remainder_ielen); ++ if(pbackup_remainder_ie && premainder_ie) ++ _rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen); ++ } ++ ++ //copy remainder IE ++ if(pbackup_remainder_ie) ++ { ++ _rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen); ++ ++ rtw_mfree(pbackup_remainder_ie, remainder_ielen); ++ } ++ ++ offset = (uint)(dst_ie - pie); ++ pnetwork->IELength = offset + remainder_ielen; ++} ++ ++ ++u8 chk_sta_is_alive(struct sta_info *psta); ++u8 chk_sta_is_alive(struct sta_info *psta) ++{ ++ u8 ret = _FALSE; ++ #ifdef DBG_EXPIRATION_CHK ++ DBG_871X("sta:"MAC_FMT", rssi:%d, rx:"STA_PKTS_FMT", expire_to:%u, %s%ssq_len:%u\n" ++ , MAC_ARG(psta->hwaddr) ++ , psta->rssi_stat.UndecoratedSmoothedPWDB ++ //, STA_RX_PKTS_ARG(psta) ++ , STA_RX_PKTS_DIFF_ARG(psta) ++ , psta->expire_to ++ , psta->state&WIFI_SLEEP_STATE?"PS, ":"" ++ , psta->state&WIFI_STA_ALIVE_CHK_STATE?"SAC, ":"" ++ , psta->sleepq_len ++ ); ++ #endif ++ ++ //if(sta_last_rx_pkts(psta) == sta_rx_pkts(psta)) ++ if((psta->sta_stats.last_rx_data_pkts + psta->sta_stats.last_rx_ctrl_pkts) == (psta->sta_stats.rx_data_pkts + psta->sta_stats.rx_ctrl_pkts)) ++ { ++ #if 0 ++ if(psta->state&WIFI_SLEEP_STATE) ++ ret = _TRUE; ++ #endif ++ } ++ else ++ { ++ ret = _TRUE; ++ } ++ ++ sta_update_last_rx_pkts(psta); ++ ++ return ret; ++} ++ ++void expire_timeout_chk(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ u8 updated; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 chk_alive_num = 0; ++ char chk_alive_list[NUM_STA]; ++ int i; ++ ++ _enter_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ ++ phead = &pstapriv->auth_list; ++ plist = get_next(phead); ++ ++ //check auth_queue ++ #ifdef DBG_EXPIRATION_CHK ++ if (rtw_end_of_queue_search(phead, plist) == _FALSE) { ++ DBG_871X(FUNC_NDEV_FMT" auth_list, cnt:%u\n" ++ , FUNC_NDEV_ARG(padapter->pnetdev), pstapriv->auth_list_cnt); ++ } ++ #endif ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, auth_list); ++ plist = get_next(plist); ++ ++ if(psta->expire_to>0) ++ { ++ psta->expire_to--; ++ if (psta->expire_to == 0) ++ { ++ rtw_list_delete(&psta->auth_list); ++ pstapriv->auth_list_cnt--; ++ ++ DBG_871X("auth expire %02X%02X%02X%02X%02X%02X\n", ++ psta->hwaddr[0],psta->hwaddr[1],psta->hwaddr[2],psta->hwaddr[3],psta->hwaddr[4],psta->hwaddr[5]); ++ ++ _exit_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(padapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ _enter_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ } ++ } ++ ++ } ++ ++ _exit_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ ++ psta = NULL; ++ ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //check asoc_queue ++ #ifdef DBG_EXPIRATION_CHK ++ if (rtw_end_of_queue_search(phead, plist) == _FALSE) { ++ DBG_871X(FUNC_NDEV_FMT" asoc_list, cnt:%u\n" ++ , FUNC_NDEV_ARG(padapter->pnetdev), pstapriv->asoc_list_cnt); ++ } ++ #endif ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ plist = get_next(plist); ++ ++ if (chk_sta_is_alive(psta) || !psta->expire_to) { ++ psta->expire_to = pstapriv->expire_to; ++ psta->keep_alive_trycnt = 0; ++ #ifdef CONFIG_TX_MCAST2UNI ++ psta->under_exist_checking = 0; ++ #endif // CONFIG_TX_MCAST2UNI ++ } else { ++ psta->expire_to--; ++ } ++ ++#ifndef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++#ifdef CONFIG_TX_MCAST2UNI ++ if ( (psta->flags & WLAN_STA_HT) && (psta->htpriv.agg_enable_bitmap || psta->under_exist_checking) ) { ++ // check sta by delba(addba) for 11n STA ++ // ToDo: use CCX report to check for all STAs ++ //DBG_871X("asoc check by DELBA/ADDBA! (pstapriv->expire_to=%d s)(psta->expire_to=%d s), [%02x, %d]\n", pstapriv->expire_to*2, psta->expire_to*2, psta->htpriv.agg_enable_bitmap, psta->under_exist_checking); ++ ++ if ( psta->expire_to <= (pstapriv->expire_to - 50 ) ) { ++ DBG_871X("asoc expire by DELBA/ADDBA! (%d s)\n", (pstapriv->expire_to-psta->expire_to)*2); ++ psta->under_exist_checking = 0; ++ psta->expire_to = 0; ++ } else if ( psta->expire_to <= (pstapriv->expire_to - 3) && (psta->under_exist_checking==0)) { ++ DBG_871X("asoc check by DELBA/ADDBA! (%d s)\n", (pstapriv->expire_to-psta->expire_to)*2); ++ psta->under_exist_checking = 1; ++ //tear down TX AMPDU ++ send_delba(padapter, 1, psta->hwaddr);// // originator ++ psta->htpriv.agg_enable_bitmap = 0x0;//reset ++ psta->htpriv.candidate_tid_bitmap = 0x0;//reset ++ } ++ } ++#endif // CONFIG_TX_MCAST2UNI ++#endif //CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ ++ if (psta->expire_to <= 0) ++ { ++ #ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ if (padapter->registrypriv.wifi_spec == 1) ++ { ++ psta->expire_to = pstapriv->expire_to; ++ continue; ++ } ++ ++ if (psta->state & WIFI_SLEEP_STATE) { ++ if (!(psta->state & WIFI_STA_ALIVE_CHK_STATE)) { ++ //to check if alive by another methods if staion is at ps mode. ++ psta->expire_to = pstapriv->expire_to; ++ psta->state |= WIFI_STA_ALIVE_CHK_STATE; ++ ++ //DBG_871X("alive chk, sta:" MAC_FMT " is at ps mode!\n", MAC_ARG(psta->hwaddr)); ++ ++ //to update bcn with tim_bitmap for this station ++ pstapriv->tim_bitmap |= BIT(psta->aid); ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ ++ if(!pmlmeext->active_keep_alive_check) ++ continue; ++ } ++ } ++ ++ if (pmlmeext->active_keep_alive_check) { ++ int stainfo_offset; ++ ++ stainfo_offset = rtw_stainfo_offset(pstapriv, psta); ++ if (stainfo_offset_valid(stainfo_offset)) { ++ chk_alive_list[chk_alive_num++] = stainfo_offset; ++ } ++ ++ continue; ++ } ++ #endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */ ++ ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ ++ DBG_871X("asoc expire "MAC_FMT", state=0x%x\n", MAC_ARG(psta->hwaddr), psta->state); ++ updated = ap_free_sta(padapter, psta, _FALSE, WLAN_REASON_DEAUTH_LEAVING); ++ } ++ else ++ { ++ /* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */ ++ if (psta->sleepq_len > (NR_XMITFRAME/pstapriv->asoc_list_cnt) ++ && padapter->xmitpriv.free_xmitframe_cnt < (NR_XMITFRAME/pstapriv->asoc_list_cnt/2) ++ ){ ++ DBG_871X("%s sta:"MAC_FMT", sleepq_len:%u, free_xmitframe_cnt:%u, asoc_list_cnt:%u, clear sleep_q\n", __func__ ++ , MAC_ARG(psta->hwaddr) ++ , psta->sleepq_len, padapter->xmitpriv.free_xmitframe_cnt, pstapriv->asoc_list_cnt); ++ wakeup_sta_to_xmit(padapter, psta); ++ } ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++if (chk_alive_num) { ++ ++ u8 backup_oper_channel=0; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ /* switch to correct channel of current network before issue keep-alive frames */ ++ if (rtw_get_oper_ch(padapter) != pmlmeext->cur_channel) { ++ backup_oper_channel = rtw_get_oper_ch(padapter); ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ } ++ ++ /* issue null data to check sta alive*/ ++ for (i = 0; i < chk_alive_num; i++) { ++ ++ int ret = _FAIL; ++ ++ psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]); ++ if(!(psta->state &_FW_LINKED)) ++ continue; ++ ++ if (psta->state & WIFI_SLEEP_STATE) ++ ret = issue_nulldata(padapter, psta->hwaddr, 0, 1, 50); ++ else ++ ret = issue_nulldata(padapter, psta->hwaddr, 0, 3, 50); ++ ++ psta->keep_alive_trycnt++; ++ if (ret == _SUCCESS) ++ { ++ DBG_871X("asoc check, sta(" MAC_FMT ") is alive\n", MAC_ARG(psta->hwaddr)); ++ psta->expire_to = pstapriv->expire_to; ++ psta->keep_alive_trycnt = 0; ++ continue; ++ } ++ else if (psta->keep_alive_trycnt <= 3) ++ { ++ DBG_871X("ack check for asoc expire, keep_alive_trycnt=%d\n", psta->keep_alive_trycnt); ++ psta->expire_to = 1; ++ continue; ++ } ++ ++ psta->keep_alive_trycnt = 0; ++ ++ DBG_871X("asoc expire "MAC_FMT", state=0x%x\n", MAC_ARG(psta->hwaddr), psta->state); ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if (rtw_is_list_empty(&psta->asoc_list)==_FALSE) { ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ updated = ap_free_sta(padapter, psta, _FALSE, WLAN_REASON_DEAUTH_LEAVING); ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ } ++ ++ if (backup_oper_channel>0) /* back to the original operation channel */ ++ SelectChannel(padapter, backup_oper_channel); ++} ++#endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */ ++ ++ associated_clients_update(padapter, updated); ++} ++ ++ ++static void add_RATid(_adapter *padapter, struct sta_info *psta) ++{ ++ int i; ++ u8 rf_type; ++ u32 init_rate=0; ++ unsigned char sta_band = 0, raid, shortGIrate = _FALSE; ++ unsigned char limit; ++ unsigned int tx_ra_bitmap=0; ++ struct ht_priv *psta_ht = NULL; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ ++ ++ if(psta) ++ psta_ht = &psta->htpriv; ++ else ++ return; ++ ++ //b/g mode ra_bitmap ++ for (i=0; ibssrateset); i++) ++ { ++ if (psta->bssrateset[i]) ++ tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f); ++ } ++ ++ //n mode ra_bitmap ++ if(psta_ht->ht_option) ++ { ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ if(rf_type == RF_2T2R) ++ limit=16;// 2R ++ else ++ limit=8;// 1R ++ ++ for (i=0; iht_cap.supp_mcs_set[i/8] & BIT(i%8)) ++ tx_ra_bitmap |= BIT(i+12); ++ } ++ ++ //max short GI rate ++ shortGIrate = psta_ht->sgi; ++ } ++ ++ ++#if 0//gtest ++ if(get_rf_mimo_mode(padapter) == RTL8712_RF_2T2R) ++ { ++ //is this a 2r STA? ++ if((pstat->tx_ra_bitmap & 0x0ff00000) != 0 && !(priv->pshare->has_2r_sta & BIT(pstat->aid))) ++ { ++ priv->pshare->has_2r_sta |= BIT(pstat->aid); ++ if(rtw_read16(padapter, 0x102501f6) != 0xffff) ++ { ++ rtw_write16(padapter, 0x102501f6, 0xffff); ++ reset_1r_sta_RA(priv, 0xffff); ++ Switch_1SS_Antenna(priv, 3); ++ } ++ } ++ else// bg or 1R STA? ++ { ++ if((priv->pmib->dot11BssType.net_work_type & WIRELESS_11N) && pstat->ht_cap_len && priv->pshare->has_2r_sta == 0) ++ { ++ if(rtw_read16(padapter, 0x102501f6) != 0x7777) ++ { // MCS7 SGI ++ rtw_write16(padapter, 0x102501f6,0x7777); ++ reset_1r_sta_RA(priv, 0x7777); ++ Switch_1SS_Antenna(priv, 2); ++ } ++ } ++ } ++ ++ } ++ ++ if ((pstat->rssi_level < 1) || (pstat->rssi_level > 3)) ++ { ++ if (pstat->rssi >= priv->pshare->rf_ft_var.raGoDownUpper) ++ pstat->rssi_level = 1; ++ else if ((pstat->rssi >= priv->pshare->rf_ft_var.raGoDown20MLower) || ++ ((priv->pshare->is_40m_bw) && (pstat->ht_cap_len) && ++ (pstat->rssi >= priv->pshare->rf_ft_var.raGoDown40MLower) && ++ (pstat->ht_cap_buf.ht_cap_info & cpu_to_le16(_HTCAP_SUPPORT_CH_WDTH_)))) ++ pstat->rssi_level = 2; ++ else ++ pstat->rssi_level = 3; ++ } ++ ++ // rate adaptive by rssi ++ if ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11N) && pstat->ht_cap_len) ++ { ++ if ((get_rf_mimo_mode(priv) == MIMO_1T2R) || (get_rf_mimo_mode(priv) == MIMO_1T1R)) ++ { ++ switch (pstat->rssi_level) { ++ case 1: ++ pstat->tx_ra_bitmap &= 0x100f0000; ++ break; ++ case 2: ++ pstat->tx_ra_bitmap &= 0x100ff000; ++ break; ++ case 3: ++ if (priv->pshare->is_40m_bw) ++ pstat->tx_ra_bitmap &= 0x100ff005; ++ else ++ pstat->tx_ra_bitmap &= 0x100ff001; ++ ++ break; ++ } ++ } ++ else ++ { ++ switch (pstat->rssi_level) { ++ case 1: ++ pstat->tx_ra_bitmap &= 0x1f0f0000; ++ break; ++ case 2: ++ pstat->tx_ra_bitmap &= 0x1f0ff000; ++ break; ++ case 3: ++ if (priv->pshare->is_40m_bw) ++ pstat->tx_ra_bitmap &= 0x000ff005; ++ else ++ pstat->tx_ra_bitmap &= 0x000ff001; ++ ++ break; ++ } ++ ++ // Don't need to mask high rates due to new rate adaptive parameters ++ //if (pstat->is_broadcom_sta) // use MCS12 as the highest rate vs. Broadcom sta ++ // pstat->tx_ra_bitmap &= 0x81ffffff; ++ ++ // NIC driver will report not supporting MCS15 and MCS14 in asoc req ++ //if (pstat->is_rtl8190_sta && !pstat->is_2t_mimo_sta) ++ // pstat->tx_ra_bitmap &= 0x83ffffff; // if Realtek 1x2 sta, don't use MCS15 and MCS14 ++ } ++ } ++ else if ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11G) && isErpSta(pstat)) ++ { ++ switch (pstat->rssi_level) { ++ case 1: ++ pstat->tx_ra_bitmap &= 0x00000f00; ++ break; ++ case 2: ++ pstat->tx_ra_bitmap &= 0x00000ff0; ++ break; ++ case 3: ++ pstat->tx_ra_bitmap &= 0x00000ff5; ++ break; ++ } ++ } ++ else ++ { ++ pstat->tx_ra_bitmap &= 0x0000000d; ++ } ++ ++ // disable tx short GI when station cannot rx MCS15(AP is 2T2R) ++ // disable tx short GI when station cannot rx MCS7 (AP is 1T2R or 1T1R) ++ // if there is only 1r STA and we are 2T2R, DO NOT mask SGI rate ++ if ((!(pstat->tx_ra_bitmap & 0x8000000) && (priv->pshare->has_2r_sta > 0) && (get_rf_mimo_mode(padapter) == RTL8712_RF_2T2R)) || ++ (!(pstat->tx_ra_bitmap & 0x80000) && (get_rf_mimo_mode(padapter) != RTL8712_RF_2T2R))) ++ { ++ pstat->tx_ra_bitmap &= ~BIT(28); ++ } ++#endif ++ ++ if ( pcur_network->Configuration.DSConfig > 14 ) { ++ // 5G band ++ if (tx_ra_bitmap & 0xffff000) ++ sta_band |= WIRELESS_11_5N | WIRELESS_11A; ++ else ++ sta_band |= WIRELESS_11A; ++ } else { ++ if (tx_ra_bitmap & 0xffff000) ++ sta_band |= WIRELESS_11_24N | WIRELESS_11G | WIRELESS_11B; ++ else if (tx_ra_bitmap & 0xff0) ++ sta_band |= WIRELESS_11G |WIRELESS_11B; ++ else ++ sta_band |= WIRELESS_11B; ++ } ++ ++ raid = networktype_to_raid(sta_band); ++ init_rate = get_highest_rate_idx(tx_ra_bitmap&0x0fffffff)&0x3f; ++ ++ if (psta->aid < NUM_STA) ++ { ++ u8 arg = 0; ++ ++ arg = psta->mac_id&0x1f; ++ ++ arg |= BIT(7);//support entry 2~31 ++ ++ if (shortGIrate==_TRUE) ++ arg |= BIT(5); ++ ++ tx_ra_bitmap |= ((raid<<28)&0xf0000000); ++ ++ DBG_871X("%s=> mac_id:%d , raid:%d , bitmap=0x%x, arg=0x%x\n", ++ __FUNCTION__ , psta->mac_id, raid ,tx_ra_bitmap, arg); ++ ++ //bitmap[0:27] = tx_rate_bitmap ++ //bitmap[28:31]= Rate Adaptive id ++ //arg[0:4] = macid ++ //arg[5] = Short GI ++ rtw_hal_add_ra_tid(padapter, tx_ra_bitmap, arg); ++ ++ if (shortGIrate==_TRUE) ++ init_rate |= BIT(6); ++ ++ //set ra_id, init_rate ++ psta->raid = raid; ++ psta->init_rate = init_rate; ++ ++ } ++ else ++ { ++ DBG_871X("station aid %d exceed the max number\n", psta->aid); ++ } ++ ++} ++ ++static void update_bmc_sta(_adapter *padapter) ++{ ++ _irqL irqL; ++ u32 init_rate=0; ++ unsigned char network_type, raid; ++ int i, supportRateNum = 0; ++ unsigned int tx_ra_bitmap=0; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ struct sta_info *psta = rtw_get_bcmc_stainfo(padapter); ++ ++ if(psta) ++ { ++ psta->aid = 0;//default set to 0 ++ //psta->mac_id = psta->aid+4; ++ psta->mac_id = psta->aid + 1; ++ ++ psta->qos_option = 0; ++ psta->htpriv.ht_option = _FALSE; ++ ++ psta->ieee8021x_blocked = 0; ++ ++ _rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats)); ++ ++ //psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, because it has been set before this. ++ ++ ++ ++ //prepare for add_RATid ++ supportRateNum = rtw_get_rateset_len((u8*)&pcur_network->SupportedRates); ++ network_type = rtw_check_network_type((u8*)&pcur_network->SupportedRates, supportRateNum, 1); ++ ++ _rtw_memcpy(psta->bssrateset, &pcur_network->SupportedRates, supportRateNum); ++ psta->bssratelen = supportRateNum; ++ ++ //b/g mode ra_bitmap ++ for (i=0; ibssrateset[i]) ++ tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f); ++ } ++ ++ if ( pcur_network->Configuration.DSConfig > 14 ) { ++ //force to A mode. 5G doesn't support CCK rates ++ network_type = WIRELESS_11A; ++ tx_ra_bitmap = 0x150; // 6, 12, 24 Mbps ++ } else { ++ //force to b mode ++ network_type = WIRELESS_11B; ++ tx_ra_bitmap = 0xf; ++ } ++ ++ //tx_ra_bitmap = update_basic_rate(pcur_network->SupportedRates, supportRateNum); ++ ++ raid = networktype_to_raid(network_type); ++ init_rate = get_highest_rate_idx(tx_ra_bitmap&0x0fffffff)&0x3f; ++ ++ //DBG_871X("Add id %d val %08x to ratr for bmc sta\n", psta->aid, tx_ra_bitmap); ++ ++ //if(pHalData->fw_ractrl == _TRUE) ++ { ++ u8 arg = 0; ++ ++ arg = psta->mac_id&0x1f; ++ ++ arg |= BIT(7); ++ ++ //if (shortGIrate==_TRUE) ++ // arg |= BIT(5); ++ ++ tx_ra_bitmap |= ((raid<<28)&0xf0000000); ++ ++ DBG_871X("update_bmc_sta, mask=0x%x, arg=0x%x\n", tx_ra_bitmap, arg); ++ ++ //bitmap[0:27] = tx_rate_bitmap ++ //bitmap[28:31]= Rate Adaptive id ++ //arg[0:4] = macid ++ //arg[5] = Short GI ++ rtw_hal_add_ra_tid(padapter, tx_ra_bitmap, arg); ++ ++ } ++ ++ //set ra_id, init_rate ++ psta->raid = raid; ++ psta->init_rate = init_rate; ++ ++ _enter_critical_bh(&psta->lock, &irqL); ++ psta->state = _FW_LINKED; ++ _exit_critical_bh(&psta->lock, &irqL); ++ ++ } ++ else ++ { ++ DBG_871X("add_RATid_bmc_sta error!\n"); ++ } ++ ++} ++ ++//notes: ++//AID: 1~MAX for sta and 0 for bc/mc in ap/adhoc mode ++//MAC_ID = AID+1 for sta in ap/adhoc mode ++//MAC_ID = 1 for bc/mc for sta/ap/adhoc ++//MAC_ID = 0 for bssid for sta/ap/adhoc ++//CAM_ID = //0~3 for default key, cmd_id=macid + 3, macid=aid+1; ++ ++void update_sta_info_apmode(_adapter *padapter, struct sta_info *psta) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct ht_priv *phtpriv_ap = &pmlmepriv->htpriv; ++ struct ht_priv *phtpriv_sta = &psta->htpriv; ++ ++ //set intf_tag to if1 ++ //psta->intf_tag = 0; ++ ++ //psta->mac_id = psta->aid+4; ++ psta->mac_id = psta->aid+1; ++ ++ if(psecuritypriv->dot11AuthAlgrthm==dot11AuthAlgrthm_8021X) ++ psta->ieee8021x_blocked = _TRUE; ++ else ++ psta->ieee8021x_blocked = _FALSE; ++ ++ ++ //update sta's cap ++ ++ //ERP ++ VCS_update(padapter, psta); ++ ++ //HT related cap ++ if(phtpriv_sta->ht_option) ++ { ++ //check if sta supports rx ampdu ++ phtpriv_sta->ampdu_enable = phtpriv_ap->ampdu_enable; ++ ++ //check if sta support s Short GI ++ if((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & cpu_to_le16(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ++ { ++ phtpriv_sta->sgi = _TRUE; ++ } ++ ++ // bwmode ++ if((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH)) ++ { ++ //phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_40; ++ phtpriv_sta->bwmode = pmlmeext->cur_bwmode; ++ phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset; ++ ++ } ++ ++ psta->qos_option = _TRUE; ++ ++ } ++ else ++ { ++ phtpriv_sta->ampdu_enable = _FALSE; ++ ++ phtpriv_sta->sgi = _FALSE; ++ phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_20; ++ phtpriv_sta->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ } ++ ++ //Rx AMPDU ++ send_delba(padapter, 0, psta->hwaddr);// recipient ++ ++ //TX AMPDU ++ send_delba(padapter, 1, psta->hwaddr);// // originator ++ phtpriv_sta->agg_enable_bitmap = 0x0;//reset ++ phtpriv_sta->candidate_tid_bitmap = 0x0;//reset ++ ++ ++ //todo: init other variables ++ ++ _rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats)); ++ ++ ++ //add ratid ++ //add_RATid(padapter, psta);//move to ap_sta_info_defer_update() ++ ++ ++ _enter_critical_bh(&psta->lock, &irqL); ++ psta->state |= _FW_LINKED; ++ _exit_critical_bh(&psta->lock, &irqL); ++ ++ ++} ++ ++static void update_hw_ht_param(_adapter *padapter) ++{ ++ unsigned char max_AMPDU_len; ++ unsigned char min_MPDU_spacing; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ ++ //handle A-MPDU parameter field ++ /* ++ AMPDU_para [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k ++ AMPDU_para [4:2]:Min MPDU Start Spacing ++ */ ++ max_AMPDU_len = pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x03; ++ ++ min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) >> 2; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing)); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len)); ++ ++ // ++ // Config SM Power Save setting ++ // ++ pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2; ++ if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC) ++ { ++ /*u8 i; ++ //update the MCS rates ++ for (i = 0; i < 16; i++) ++ { ++ pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ }*/ ++ DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__); ++ } ++ ++ // ++ // Config current HT Protection mode. ++ // ++ //pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3; ++ ++} ++ ++static void start_bss_network(_adapter *padapter, u8 *pbuf) ++{ ++ u8 *p; ++ u8 val8, cur_channel, cur_bwmode, cur_ch_offset; ++ u16 bcn_interval; ++ u32 acparm; ++ int ie_len; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork_mlmeext = &(pmlmeinfo->network); ++ struct HT_info_element *pht_info=NULL; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ u8 cbw40_enable=0; ++ u8 change_band = _FALSE; ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ bcn_interval = (u16)pnetwork->Configuration.BeaconPeriod; ++ cur_channel = pnetwork->Configuration.DSConfig; ++ cur_bwmode = HT_CHANNEL_WIDTH_20;; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ ++ //check if there is wps ie, ++ //if there is wpsie in beacon, the hostapd will update beacon twice when stating hostapd, ++ //and at first time the security ie ( RSN/WPA IE) will not include in beacon. ++ if(NULL == rtw_get_wps_ie(pnetwork->IEs+_FIXED_IE_LENGTH_, pnetwork->IELength-_FIXED_IE_LENGTH_, NULL, NULL)) ++ { ++ pmlmeext->bstart_bss = _TRUE; ++ } ++ ++ //todo: update wmm, ht cap ++ //pmlmeinfo->WMM_enable; ++ //pmlmeinfo->HT_enable; ++ if(pmlmepriv->qospriv.qos_option) ++ pmlmeinfo->WMM_enable = _TRUE; ++ ++ if(pmlmepriv->htpriv.ht_option) ++ { ++ pmlmeinfo->WMM_enable = _TRUE; ++ pmlmeinfo->HT_enable = _TRUE; ++ //pmlmeinfo->HT_info_enable = _TRUE; ++ //pmlmeinfo->HT_caps_enable = _TRUE; ++ ++ update_hw_ht_param(padapter); ++ } ++ ++ ++ if(pmlmepriv->cur_network.join_res != _TRUE) //setting only at first time ++ { ++ //WEP Key will be set before this function, do not clear CAM. ++ if ((psecuritypriv->dot11PrivacyAlgrthm != _WEP40_) && (psecuritypriv->dot11PrivacyAlgrthm != _WEP104_)) ++ flush_all_cam_entry(padapter); //clear CAM ++ } ++ ++ //set MSR to AP_Mode ++ Set_MSR(padapter, _HW_STATE_AP_); ++ ++ //Set BSSID REG ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pnetwork->MacAddress); ++ ++ //Set EDCA param reg ++#ifdef CONFIG_CONCURRENT_MODE ++ acparm = 0x005ea42b; ++#else ++ acparm = 0x002F3217; // VO ++#endif ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm)); ++ acparm = 0x005E4317; // VI ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm)); ++ //acparm = 0x00105320; // BE ++ acparm = 0x005ea42b; ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm)); ++ acparm = 0x0000A444; // BK ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm)); ++ ++ //Set Security ++ val8 = (psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X)? 0xcc: 0xcf; ++ rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); ++ ++ //Beacon Control related register ++ rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&bcn_interval)); ++ ++ if(pmlmepriv->cur_network.join_res != _TRUE) //setting only at first time ++ { ++ u32 initialgain; ++ ++ initialgain = 0x1e; ++ ++ ++ //disable dynamic functions, such as high power, DIG ++ //Save_DM_Func_Flag(padapter); ++ //Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->adapter_type > PRIMARY_ADAPTER) ++ { ++ if(rtw_buddy_adapter_up(padapter)) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ ++ //turn on dynamic functions on PRIMARY_ADAPTER, dynamic functions only runs at PRIMARY_ADAPTER ++ Switch_DM_Func(pbuddy_adapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE); ++ ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ } ++ } ++ else ++#endif ++ { ++ //turn on dynamic functions ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ } ++ ++ } ++ ++ //set channel, bwmode ++ p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ ++ if( pmlmeext->cur_channel > 14 ) ++ { ++ if( pregpriv->cbw40_enable & BIT(1) ) ++ cbw40_enable = 1; ++ } ++ else ++ if( pregpriv->cbw40_enable & BIT(0) ) ++ cbw40_enable = 1; ++ ++ if ((cbw40_enable) && (pht_info->infos[0] & BIT(2))) ++ { ++ //switch to the 40M Hz mode ++ //pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ cur_bwmode = HT_CHANNEL_WIDTH_40; ++ switch (pht_info->infos[0] & 0x3) ++ { ++ case 1: ++ //pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ ++ case 3: ++ //pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ ++ default: ++ //pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ } ++ ++ } ++ ++ } ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_set_ap_channel_bandwidth(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++#else ++ //TODO: need to judge the phy parameters on concurrent mode for single phy ++ //set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++#ifdef CONFIG_CONCURRENT_MODE ++ if(!check_buddy_fwstate(padapter, _FW_LINKED|_FW_UNDER_LINKING|_FW_UNDER_SURVEY)) ++ { ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ } ++ else if(check_buddy_fwstate(padapter, _FW_LINKED)==_TRUE)//only second adapter can enter AP Mode ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ //To sync cur_channel/cur_bwmode/cur_ch_offset with primary adapter ++ DBG_871X("primary iface is at linked state, sync cur_channel/cur_bwmode/cur_ch_offset\n"); ++ DBG_871X("primary adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ DBG_871X("second adapter, CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ if((cur_channel <= 14 && pbuddy_mlmeext->cur_channel >= 36) || ++ (cur_channel >= 36 && pbuddy_mlmeext->cur_channel <= 14)) ++ change_band = _TRUE; ++ ++ cur_channel = pbuddy_mlmeext->cur_channel; ++ if(cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ if(pht_info) ++ pht_info->infos[0] &= ~(BIT(0)|BIT(1)); ++ ++ if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ ++ //to update cur_ch_offset value in beacon ++ if(pht_info) ++ { ++ switch(cur_ch_offset) ++ { ++ case HAL_PRIME_CHNL_OFFSET_LOWER: ++ pht_info->infos[0] |= 0x1; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_UPPER: ++ pht_info->infos[0] |= 0x3; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_DONT_CARE: ++ default: ++ break; ++ } ++ } ++ ++ } ++ else if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) ++ { ++ cur_bwmode = HT_CHANNEL_WIDTH_20; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ if(cur_channel>0 && cur_channel<5) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x1; ++ ++ cur_bwmode = HT_CHANNEL_WIDTH_40; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ } ++ ++ if(cur_channel>7 && cur_channel<(14+1)) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x3; ++ ++ cur_bwmode = HT_CHANNEL_WIDTH_40; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ } ++ ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ } ++ ++ } ++ ++ // to update channel value in beacon ++ pnetwork->Configuration.DSConfig = cur_channel; ++ p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if(p && ie_len>0) ++ *(p + 2) = cur_channel; ++ ++ if(pht_info) ++ pht_info->primary_channel = cur_channel; ++ ++ //set buddy adapter channel, bandwidth, offeset to current adapter ++ pmlmeext->cur_channel = cur_channel; ++ pmlmeext->cur_bwmode = cur_bwmode; ++ pmlmeext->cur_ch_offset = cur_ch_offset; ++ ++ //buddy interface band is different from current interface, update ERP, support rate, ext support rate IE ++ if(change_band == _TRUE) ++ change_band_update_ie(padapter, pnetwork); ++ } ++#else ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ DBG_871X("CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ // ++ pmlmeext->cur_channel = cur_channel; ++ pmlmeext->cur_bwmode = cur_bwmode; ++ pmlmeext->cur_ch_offset = cur_ch_offset; ++#endif //CONFIG_DUALMAC_CONCURRENT ++ pmlmeext->cur_wireless_mode = pmlmepriv->cur_network.network_type; ++ ++ //update cur_wireless_mode ++ update_wireless_mode(padapter); ++ ++ //update RRSR after set channel and bandwidth ++ UpdateBrateTbl(padapter, pnetwork->SupportedRates); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates); ++ ++ //udpate capability after cur_wireless_mode updated ++ update_capinfo(padapter, rtw_get_capability((WLAN_BSSID_EX *)pnetwork)); ++ ++ //let pnetwork_mlmeext == pnetwork_mlme. ++ _rtw_memcpy(pnetwork_mlmeext, pnetwork, pnetwork->Length); ++ ++#ifdef CONFIG_P2P ++ _rtw_memcpy(pwdinfo->p2p_group_ssid, pnetwork->Ssid.Ssid, pnetwork->Ssid.SsidLength); ++ pwdinfo->p2p_group_ssid_len = pnetwork->Ssid.SsidLength; ++#endif //CONFIG_P2P ++ ++ if(_TRUE == pmlmeext->bstart_bss) ++ { ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ ++#ifndef CONFIG_INTERRUPT_BASED_TXBCN //other case will tx beacon when bcn interrupt coming in. ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) ++ //issue beacon frame ++ if(send_beacon(padapter)==_FAIL) ++ { ++ DBG_871X("issue_beacon, fail!\n"); ++ } ++#endif ++#endif //!CONFIG_INTERRUPT_BASED_TXBCN ++ ++ } ++ ++ ++ //update bc/mc sta_info ++ update_bmc_sta(padapter); ++ ++ //pmlmeext->bstart_bss = _TRUE; ++ ++} ++ ++int rtw_check_beacon_data(_adapter *padapter, u8 *pbuf, int len) ++{ ++ int ret=_SUCCESS; ++ u8 *p; ++ u8 *pHT_caps_ie=NULL; ++ u8 *pHT_info_ie=NULL; ++ struct sta_info *psta = NULL; ++ u16 cap, ht_cap=_FALSE; ++ uint ie_len = 0; ++ int group_cipher, pairwise_cipher; ++ u8 channel, network_type, supportRate[NDIS_802_11_LENGTH_RATES_EX]; ++ int supportRateNum = 0; ++ u8 OUI1[] = {0x00, 0x50, 0xf2,0x01}; ++ u8 wps_oui[4]={0x0,0x50,0xf2,0x04}; ++ u8 WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01}; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pbss_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *ie = pbss_network->IEs; ++ ++ ++ /* SSID */ ++ /* Supported rates */ ++ /* DS Params */ ++ /* WLAN_EID_COUNTRY */ ++ /* ERP Information element */ ++ /* Extended supported rates */ ++ /* WPA/WPA2 */ ++ /* Wi-Fi Wireless Multimedia Extensions */ ++ /* ht_capab, ht_oper */ ++ /* WPS IE */ ++ ++ DBG_871X("%s, len=%d\n", __FUNCTION__, len); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return _FAIL; ++ ++ ++ if(len>MAX_IE_SZ) ++ return _FAIL; ++ ++ pbss_network->IELength = len; ++ ++ _rtw_memset(ie, 0, MAX_IE_SZ); ++ ++ _rtw_memcpy(ie, pbuf, pbss_network->IELength); ++ ++ ++ if(pbss_network->InfrastructureMode!=Ndis802_11APMode) ++ return _FAIL; ++ ++ pbss_network->Rssi = 0; ++ ++ _rtw_memcpy(pbss_network->MacAddress, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ //beacon interval ++ p = rtw_get_beacon_interval_from_ie(ie);//ie + 8; // 8: TimeStamp, 2: Beacon Interval 2:Capability ++ //pbss_network->Configuration.BeaconPeriod = le16_to_cpu(*(unsigned short*)p); ++ pbss_network->Configuration.BeaconPeriod = RTW_GET_LE16(p); ++ ++ //capability ++ //cap = *(unsigned short *)rtw_get_capability_from_ie(ie); ++ //cap = le16_to_cpu(cap); ++ cap = RTW_GET_LE16(ie); ++ ++ //SSID ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len, (pbss_network->IELength -_BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ { ++ _rtw_memset(&pbss_network->Ssid, 0, sizeof(NDIS_802_11_SSID)); ++ _rtw_memcpy(pbss_network->Ssid.Ssid, (p + 2), ie_len); ++ pbss_network->Ssid.SsidLength = ie_len; ++ } ++ ++ //chnnel ++ channel = 0; ++ pbss_network->Configuration.Length = 0; ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _DSSET_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ channel = *(p + 2); ++ ++ pbss_network->Configuration.DSConfig = channel; ++ ++ ++ _rtw_memset(supportRate, 0, NDIS_802_11_LENGTH_RATES_EX); ++ // get supported rates ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if (p != NULL) ++ { ++ _rtw_memcpy(supportRate, p+2, ie_len); ++ supportRateNum = ie_len; ++ } ++ ++ //get ext_supported rates ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ie_len, pbss_network->IELength - _BEACON_IE_OFFSET_); ++ if (p != NULL) ++ { ++ _rtw_memcpy(supportRate+supportRateNum, p+2, ie_len); ++ supportRateNum += ie_len; ++ ++ } ++ ++ network_type = rtw_check_network_type(supportRate, supportRateNum, channel); ++ ++ rtw_set_supported_rate(pbss_network->SupportedRates, network_type); ++ ++ ++ //parsing ERP_IE ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ { ++ ERP_IE_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)p); ++ } ++ ++ //update privacy/security ++ if (cap & BIT(4)) ++ pbss_network->Privacy = 1; ++ else ++ pbss_network->Privacy = 0; ++ ++ psecuritypriv->wpa_psk = 0; ++ ++ //wpa2 ++ group_cipher = 0; pairwise_cipher = 0; ++ psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_; ++ psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_; ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ { ++ if(rtw_parse_wpa2_ie(p, ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ psecuritypriv->dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ ++ psecuritypriv->dot8021xalg = 1;//psk, todo:802.1x ++ psecuritypriv->wpa_psk |= BIT(1); ++ ++ psecuritypriv->wpa2_group_cipher = group_cipher; ++ psecuritypriv->wpa2_pairwise_cipher = pairwise_cipher; ++#if 0 ++ switch(group_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_; ++ break; ++ case WPA_CIPHER_WEP40: ++ psecuritypriv->wpa2_group_cipher = _WEP40_; ++ break; ++ case WPA_CIPHER_TKIP: ++ psecuritypriv->wpa2_group_cipher = _TKIP_; ++ break; ++ case WPA_CIPHER_CCMP: ++ psecuritypriv->wpa2_group_cipher = _AES_; ++ break; ++ case WPA_CIPHER_WEP104: ++ psecuritypriv->wpa2_group_cipher = _WEP104_; ++ break; ++ } ++ ++ switch(pairwise_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_; ++ break; ++ case WPA_CIPHER_WEP40: ++ psecuritypriv->wpa2_pairwise_cipher = _WEP40_; ++ break; ++ case WPA_CIPHER_TKIP: ++ psecuritypriv->wpa2_pairwise_cipher = _TKIP_; ++ break; ++ case WPA_CIPHER_CCMP: ++ psecuritypriv->wpa2_pairwise_cipher = _AES_; ++ break; ++ case WPA_CIPHER_WEP104: ++ psecuritypriv->wpa2_pairwise_cipher = _WEP104_; ++ break; ++ } ++#endif ++ } ++ ++ } ++ ++ //wpa ++ ie_len = 0; ++ group_cipher = 0; pairwise_cipher = 0; ++ psecuritypriv->wpa_group_cipher = _NO_PRIVACY_; ++ psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_; ++ for (p = ie + _BEACON_IE_OFFSET_; ;p += (ie_len + 2)) ++ { ++ p = rtw_get_ie(p, _SSN_IE_1_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2))); ++ if ((p) && (_rtw_memcmp(p+2, OUI1, 4))) ++ { ++ if(rtw_parse_wpa_ie(p, ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ psecuritypriv->dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ ++ psecuritypriv->dot8021xalg = 1;//psk, todo:802.1x ++ ++ psecuritypriv->wpa_psk |= BIT(0); ++ ++ psecuritypriv->wpa_group_cipher = group_cipher; ++ psecuritypriv->wpa_pairwise_cipher = pairwise_cipher; ++ ++#if 0 ++ switch(group_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ psecuritypriv->wpa_group_cipher = _NO_PRIVACY_; ++ break; ++ case WPA_CIPHER_WEP40: ++ psecuritypriv->wpa_group_cipher = _WEP40_; ++ break; ++ case WPA_CIPHER_TKIP: ++ psecuritypriv->wpa_group_cipher = _TKIP_; ++ break; ++ case WPA_CIPHER_CCMP: ++ psecuritypriv->wpa_group_cipher = _AES_; ++ break; ++ case WPA_CIPHER_WEP104: ++ psecuritypriv->wpa_group_cipher = _WEP104_; ++ break; ++ } ++ ++ switch(pairwise_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_; ++ break; ++ case WPA_CIPHER_WEP40: ++ psecuritypriv->wpa_pairwise_cipher = _WEP40_; ++ break; ++ case WPA_CIPHER_TKIP: ++ psecuritypriv->wpa_pairwise_cipher = _TKIP_; ++ break; ++ case WPA_CIPHER_CCMP: ++ psecuritypriv->wpa_pairwise_cipher = _AES_; ++ break; ++ case WPA_CIPHER_WEP104: ++ psecuritypriv->wpa_pairwise_cipher = _WEP104_; ++ break; ++ } ++#endif ++ } ++ ++ break; ++ ++ } ++ ++ if ((p == NULL) || (ie_len == 0)) ++ { ++ break; ++ } ++ ++ } ++ ++ //wmm ++ ie_len = 0; ++ pmlmepriv->qospriv.qos_option = 0; ++ if(pregistrypriv->wmm_enable) ++ { ++ for (p = ie + _BEACON_IE_OFFSET_; ;p += (ie_len + 2)) ++ { ++ p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2))); ++ if((p) && _rtw_memcmp(p+2, WMM_PARA_IE, 6)) ++ { ++ pmlmepriv->qospriv.qos_option = 1; ++ ++ *(p+8) |= BIT(7);//QoS Info, support U-APSD ++ ++ /* disable all ACM bits since the WMM admission control is not supported */ ++ *(p + 10) &= ~BIT(4); /* BE */ ++ *(p + 14) &= ~BIT(4); /* BK */ ++ *(p + 18) &= ~BIT(4); /* VI */ ++ *(p + 22) &= ~BIT(4); /* VO */ ++ ++ break; ++ } ++ ++ if ((p == NULL) || (ie_len == 0)) ++ { ++ break; ++ } ++ } ++ } ++ ++ //parsing HT_CAP_IE ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ { ++ u8 rf_type; ++ ++ struct rtw_ieee80211_ht_cap *pht_cap = (struct rtw_ieee80211_ht_cap *)(p+2); ++ ++ pHT_caps_ie=p; ++ ++ ++ ht_cap = _TRUE; ++ network_type |= WIRELESS_11_24N; ++ ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ if((psecuritypriv->wpa_pairwise_cipher & WPA_CIPHER_CCMP) || ++ (psecuritypriv->wpa2_pairwise_cipher & WPA_CIPHER_CCMP)) ++ { ++ pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&(0x07<<2)); ++ } ++ else ++ { ++ pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&0x00); ++ } ++ ++ pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_FACTOR & 0x03); //set Max Rx AMPDU size to 64K ++ ++ if(rf_type == RF_1T1R) ++ { ++ pht_cap->supp_mcs_set[0] = 0xff; ++ pht_cap->supp_mcs_set[1] = 0x0; ++ } ++ ++ _rtw_memcpy(&pmlmepriv->htpriv.ht_cap, p+2, ie_len); ++ ++ } ++ ++ //parsing HT_INFO_IE ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_)); ++ if(p && ie_len>0) ++ { ++ pHT_info_ie=p; ++ } ++ ++ switch(network_type) ++ { ++ case WIRELESS_11B: ++ pbss_network->NetworkTypeInUse = Ndis802_11DS; ++ break; ++ case WIRELESS_11G: ++ case WIRELESS_11BG: ++ case WIRELESS_11G_24N: ++ case WIRELESS_11BG_24N: ++ pbss_network->NetworkTypeInUse = Ndis802_11OFDM24; ++ break; ++ case WIRELESS_11A: ++ pbss_network->NetworkTypeInUse = Ndis802_11OFDM5; ++ break; ++ default : ++ pbss_network->NetworkTypeInUse = Ndis802_11OFDM24; ++ break; ++ } ++ ++ pmlmepriv->cur_network.network_type = network_type; ++ ++ ++ pmlmepriv->htpriv.ht_option = _FALSE; ++#ifdef CONFIG_80211N_HT ++ if( (psecuritypriv->wpa2_pairwise_cipher&WPA_CIPHER_TKIP) || ++ (psecuritypriv->wpa_pairwise_cipher&WPA_CIPHER_TKIP)) ++ { ++ //todo: ++ //ht_cap = _FALSE; ++ } ++ ++ //ht_cap ++ if(pregistrypriv->ht_enable && ht_cap==_TRUE) ++ { ++ pmlmepriv->htpriv.ht_option = _TRUE; ++ pmlmepriv->qospriv.qos_option = 1; ++ ++ if(pregistrypriv->ampdu_enable==1) ++ { ++ pmlmepriv->htpriv.ampdu_enable = _TRUE; ++ } ++ ++ HT_caps_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)pHT_caps_ie); ++ ++ HT_info_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)pHT_info_ie); ++ } ++#endif ++ ++ ++ pbss_network->Length = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX *)pbss_network); ++ ++ //issue beacon to start bss network ++ start_bss_network(padapter, (u8*)pbss_network); ++ ++ ++ //alloc sta_info for ap itself ++ psta = rtw_get_stainfo(&padapter->stapriv, pbss_network->MacAddress); ++ if(!psta) ++ { ++ psta = rtw_alloc_stainfo(&padapter->stapriv, pbss_network->MacAddress); ++ if (psta == NULL) ++ { ++ return _FAIL; ++ } ++ } ++ psta->state |= WIFI_AP_STATE; //Aries, add,fix bug of flush_cam_entry at STOP AP mode , 0724 ++ rtw_indicate_connect( padapter); ++ ++ pmlmepriv->cur_network.join_res = _TRUE;//for check if already set beacon ++ ++ //update bc/mc sta_info ++ //update_bmc_sta(padapter); ++ ++ return ret; ++ ++} ++ ++void rtw_set_macaddr_acl(_adapter *padapter, int mode) ++{ ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ ++ DBG_871X("%s, mode=%d\n", __func__, mode); ++ ++ pacl_list->mode = mode; ++} ++ ++int rtw_acl_add_sta(_adapter *padapter, u8 *addr) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ u8 added = _FALSE; ++ int i, ret=0; ++ struct rtw_wlan_acl_node *paclnode; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ _queue *pacl_node_q =&pacl_list->acl_node_q; ++ ++ DBG_871X("%s(acl_num=%d)=" MAC_FMT "\n", __func__, pacl_list->num, MAC_ARG(addr)); ++ ++ if((NUM_ACL-1) < pacl_list->num) ++ return (-1); ++ ++ ++ _enter_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ phead = get_list_head(pacl_node_q); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list); ++ plist = get_next(plist); ++ ++ if(_rtw_memcmp(paclnode->addr, addr, ETH_ALEN)) ++ { ++ if(paclnode->valid == _TRUE) ++ { ++ added = _TRUE; ++ DBG_871X("%s, sta has been added\n", __func__); ++ break; ++ } ++ } ++ } ++ ++ _exit_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ ++ if(added == _TRUE) ++ return ret; ++ ++ ++ _enter_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ for(i=0; i< NUM_ACL; i++) ++ { ++ paclnode = &pacl_list->aclnode[i]; ++ ++ if(paclnode->valid == _FALSE) ++ { ++ _rtw_init_listhead(&paclnode->list); ++ ++ _rtw_memcpy(paclnode->addr, addr, ETH_ALEN); ++ ++ paclnode->valid = _TRUE; ++ ++ rtw_list_insert_tail(&paclnode->list, get_list_head(pacl_node_q)); ++ ++ pacl_list->num++; ++ ++ break; ++ } ++ } ++ ++ DBG_871X("%s, acl_num=%d\n", __func__, pacl_list->num); ++ ++ _exit_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ return ret; ++} ++ ++int rtw_acl_remove_sta(_adapter *padapter, u8 *addr) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ int i, ret=0; ++ struct rtw_wlan_acl_node *paclnode; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ _queue *pacl_node_q =&pacl_list->acl_node_q; ++ ++ DBG_871X("%s(acl_num=%d)=" MAC_FMT "\n", __func__, pacl_list->num, MAC_ARG(addr)); ++ ++ _enter_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ phead = get_list_head(pacl_node_q); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list); ++ plist = get_next(plist); ++ ++ if(_rtw_memcmp(paclnode->addr, addr, ETH_ALEN)) ++ { ++ if(paclnode->valid == _TRUE) ++ { ++ paclnode->valid = _FALSE; ++ ++ rtw_list_delete(&paclnode->list); ++ ++ pacl_list->num--; ++ } ++ } ++ } ++ ++ _exit_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ DBG_871X("%s, acl_num=%d\n", __func__, pacl_list->num); ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ ++static void update_bcn_fixed_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_erpinfo_ie(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network); ++ unsigned char *p, *ie = pnetwork->IEs; ++ u32 len = 0; ++ ++ DBG_871X("%s, ERP_enable=%d\n", __FUNCTION__, pmlmeinfo->ERP_enable); ++ ++ if(!pmlmeinfo->ERP_enable) ++ return; ++ ++ //parsing ERP_IE ++ p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &len, (pnetwork->IELength - _BEACON_IE_OFFSET_)); ++ if(p && len>0) ++ { ++ PNDIS_802_11_VARIABLE_IEs pIE = (PNDIS_802_11_VARIABLE_IEs)p; ++ ++ if (pmlmepriv->num_sta_non_erp == 1) ++ pIE->data[0] |= RTW_ERP_INFO_NON_ERP_PRESENT|RTW_ERP_INFO_USE_PROTECTION; ++ else ++ pIE->data[0] &= ~(RTW_ERP_INFO_NON_ERP_PRESENT|RTW_ERP_INFO_USE_PROTECTION); ++ ++ if(pmlmepriv->num_sta_no_short_preamble > 0) ++ pIE->data[0] |= RTW_ERP_INFO_BARKER_PREAMBLE_MODE; ++ else ++ pIE->data[0] &= ~(RTW_ERP_INFO_BARKER_PREAMBLE_MODE); ++ ++ ERP_IE_handler(padapter, pIE); ++ } ++ ++} ++ ++static void update_bcn_htcap_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_htinfo_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_rsn_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_wpa_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_wmm_ie(_adapter *padapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++} ++ ++static void update_bcn_wps_ie(_adapter *padapter) ++{ ++ u8 *pwps_ie=NULL, *pwps_ie_src, *premainder_ie, *pbackup_remainder_ie=NULL; ++ uint wps_ielen=0, wps_offset, remainder_ielen; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network); ++ unsigned char *ie = pnetwork->IEs; ++ u32 ielen = pnetwork->IELength; ++ ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ pwps_ie = rtw_get_wps_ie(ie+_FIXED_IE_LENGTH_, ielen-_FIXED_IE_LENGTH_, NULL, &wps_ielen); ++ ++ if(pwps_ie==NULL || wps_ielen==0) ++ return; ++ ++ wps_offset = (uint)(pwps_ie-ie); ++ ++ premainder_ie = pwps_ie + wps_ielen; ++ ++ remainder_ielen = ielen - wps_offset - wps_ielen; ++ ++ if(remainder_ielen>0) ++ { ++ pbackup_remainder_ie = rtw_malloc(remainder_ielen); ++ if(pbackup_remainder_ie) ++ _rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen); ++ } ++ ++ ++ pwps_ie_src = pmlmepriv->wps_beacon_ie; ++ if(pwps_ie_src == NULL) ++ return; ++ ++ ++ wps_ielen = (uint)pwps_ie_src[1];//to get ie data len ++ if((wps_offset+wps_ielen+2+remainder_ielen)<=MAX_IE_SZ) ++ { ++ _rtw_memcpy(pwps_ie, pwps_ie_src, wps_ielen+2); ++ pwps_ie += (wps_ielen+2); ++ ++ if(pbackup_remainder_ie) ++ _rtw_memcpy(pwps_ie, pbackup_remainder_ie, remainder_ielen); ++ ++ //update IELength ++ pnetwork->IELength = wps_offset + (wps_ielen+2) + remainder_ielen; ++ } ++ ++ if(pbackup_remainder_ie) ++ rtw_mfree(pbackup_remainder_ie, remainder_ielen); ++ ++} ++ ++static void update_bcn_p2p_ie(_adapter *padapter) ++{ ++ ++} ++ ++static void update_bcn_vendor_spec_ie(_adapter *padapter, u8*oui) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if(_rtw_memcmp(RTW_WPA_OUI, oui, 4)) ++ { ++ update_bcn_wpa_ie(padapter); ++ } ++ else if(_rtw_memcmp(WMM_OUI, oui, 4)) ++ { ++ update_bcn_wmm_ie(padapter); ++ } ++ else if(_rtw_memcmp(WPS_OUI, oui, 4)) ++ { ++ update_bcn_wps_ie(padapter); ++ } ++ else if(_rtw_memcmp(P2P_OUI, oui, 4)) ++ { ++ update_bcn_p2p_ie(padapter); ++ } ++ else ++ { ++ DBG_871X("unknown OUI type!\n"); ++ } ++ ++ ++} ++ ++void update_beacon(_adapter *padapter, u8 ie_id, u8 *oui, u8 tx) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv; ++ struct mlme_ext_priv *pmlmeext; ++ //struct mlme_ext_info *pmlmeinfo; ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if(!padapter) ++ return; ++ ++ pmlmepriv = &(padapter->mlmepriv); ++ pmlmeext = &(padapter->mlmeextpriv); ++ //pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if(_FALSE == pmlmeext->bstart_bss) ++ return; ++ ++ _enter_critical_bh(&pmlmepriv->bcn_update_lock, &irqL); ++ ++ switch(ie_id) ++ { ++ case 0xFF: ++ ++ update_bcn_fixed_ie(padapter);//8: TimeStamp, 2: Beacon Interval 2:Capability ++ ++ break; ++ ++ case _TIM_IE_: ++ ++ update_BCNTIM(padapter); ++ ++ break; ++ ++ case _ERPINFO_IE_: ++ ++ update_bcn_erpinfo_ie(padapter); ++ ++ break; ++ ++ case _HT_CAPABILITY_IE_: ++ ++ update_bcn_htcap_ie(padapter); ++ ++ break; ++ ++ case _RSN_IE_2_: ++ ++ update_bcn_rsn_ie(padapter); ++ ++ break; ++ ++ case _HT_ADD_INFO_IE_: ++ ++ update_bcn_htinfo_ie(padapter); ++ ++ break; ++ ++ case _VENDOR_SPECIFIC_IE_: ++ ++ update_bcn_vendor_spec_ie(padapter, oui); ++ ++ break; ++ ++ default: ++ break; ++ } ++ ++ pmlmepriv->update_bcn = _TRUE; ++ ++ _exit_critical_bh(&pmlmepriv->bcn_update_lock, &irqL); ++ ++#ifndef CONFIG_INTERRUPT_BASED_TXBCN ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) ++ if(tx) ++ { ++ //send_beacon(padapter);//send_beacon must execute on TSR level ++ set_tx_beacon_cmd(padapter); ++ } ++#else ++ { ++ //PCI will issue beacon when BCN interrupt occurs. ++ } ++#endif ++#endif //!CONFIG_INTERRUPT_BASED_TXBCN ++ ++} ++ ++#ifdef CONFIG_80211N_HT ++ ++/* ++op_mode ++Set to 0 (HT pure) under the followign conditions ++ - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or ++ - all STAs in the BSS are 20 MHz HT in 20 MHz BSS ++Set to 1 (HT non-member protection) if there may be non-HT STAs ++ in both the primary and the secondary channel ++Set to 2 if only HT STAs are associated in BSS, ++ however and at least one 20 MHz HT STA is associated ++Set to 3 (HT mixed mode) when one or more non-HT STAs are associated ++ (currently non-GF HT station is considered as non-HT STA also) ++*/ ++static int rtw_ht_operation_update(_adapter *padapter) ++{ ++ u16 cur_op_mode, new_op_mode; ++ int op_mode_changes = 0; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct ht_priv *phtpriv_ap = &pmlmepriv->htpriv; ++ ++ if(pmlmepriv->htpriv.ht_option == _TRUE) ++ return 0; ++ ++ //if (!iface->conf->ieee80211n || iface->conf->ht_op_mode_fixed) ++ // return 0; ++ ++ DBG_871X("%s current operation mode=0x%X\n", ++ __FUNCTION__, pmlmepriv->ht_op_mode); ++ ++ if (!(pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT) ++ && pmlmepriv->num_sta_ht_no_gf) { ++ pmlmepriv->ht_op_mode |= ++ HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT; ++ op_mode_changes++; ++ } else if ((pmlmepriv->ht_op_mode & ++ HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT) && ++ pmlmepriv->num_sta_ht_no_gf == 0) { ++ pmlmepriv->ht_op_mode &= ++ ~HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT; ++ op_mode_changes++; ++ } ++ ++ if (!(pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) && ++ (pmlmepriv->num_sta_no_ht || pmlmepriv->olbc_ht)) { ++ pmlmepriv->ht_op_mode |= HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT; ++ op_mode_changes++; ++ } else if ((pmlmepriv->ht_op_mode & ++ HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) && ++ (pmlmepriv->num_sta_no_ht == 0 && !pmlmepriv->olbc_ht)) { ++ pmlmepriv->ht_op_mode &= ++ ~HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT; ++ op_mode_changes++; ++ } ++ ++ /* Note: currently we switch to the MIXED op mode if HT non-greenfield ++ * station is associated. Probably it's a theoretical case, since ++ * it looks like all known HT STAs support greenfield. ++ */ ++ new_op_mode = 0; ++ if (pmlmepriv->num_sta_no_ht || ++ (pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT)) ++ new_op_mode = OP_MODE_MIXED; ++ else if ((phtpriv_ap->ht_cap.cap_info & IEEE80211_HT_CAP_SUP_WIDTH) ++ && pmlmepriv->num_sta_ht_20mhz) ++ new_op_mode = OP_MODE_20MHZ_HT_STA_ASSOCED; ++ else if (pmlmepriv->olbc_ht) ++ new_op_mode = OP_MODE_MAY_BE_LEGACY_STAS; ++ else ++ new_op_mode = OP_MODE_PURE; ++ ++ cur_op_mode = pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_OP_MODE_MASK; ++ if (cur_op_mode != new_op_mode) { ++ pmlmepriv->ht_op_mode &= ~HT_INFO_OPERATION_MODE_OP_MODE_MASK; ++ pmlmepriv->ht_op_mode |= new_op_mode; ++ op_mode_changes++; ++ } ++ ++ DBG_871X("%s new operation mode=0x%X changes=%d\n", ++ __FUNCTION__, pmlmepriv->ht_op_mode, op_mode_changes); ++ ++ return op_mode_changes; ++ ++} ++ ++#endif /* CONFIG_80211N_HT */ ++ ++void associated_clients_update(_adapter *padapter, u8 updated) ++{ ++ //update associcated stations cap. ++ if(updated == _TRUE) ++ { ++ _irqL irqL; ++ _list *phead, *plist; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //check asoc_queue ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ ++ plist = get_next(plist); ++ ++ VCS_update(padapter, psta); ++ } ++ ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ } ++ ++} ++ ++/* called > TSR LEVEL for USB or SDIO Interface*/ ++void bss_cap_update_on_sta_join(_adapter *padapter, struct sta_info *psta) ++{ ++ u8 beacon_updated = _FALSE; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ ++#if 0 ++ if (!(psta->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && ++ !psta->no_short_preamble_set) { ++ psta->no_short_preamble_set = 1; ++ pmlmepriv->num_sta_no_short_preamble++; ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_preamble == 1)) ++ ieee802_11_set_beacons(hapd->iface); ++ } ++#endif ++ ++ ++ if(!(psta->flags & WLAN_STA_SHORT_PREAMBLE)) ++ { ++ if(!psta->no_short_preamble_set) ++ { ++ psta->no_short_preamble_set = 1; ++ ++ pmlmepriv->num_sta_no_short_preamble++; ++ ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_preamble == 1)) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ ++ } ++ } ++ else ++ { ++ if(psta->no_short_preamble_set) ++ { ++ psta->no_short_preamble_set = 0; ++ ++ pmlmepriv->num_sta_no_short_preamble--; ++ ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_preamble == 0)) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ ++ } ++ } ++ ++#if 0 ++ if (psta->flags & WLAN_STA_NONERP && !psta->nonerp_set) { ++ psta->nonerp_set = 1; ++ pmlmepriv->num_sta_non_erp++; ++ if (pmlmepriv->num_sta_non_erp == 1) ++ ieee802_11_set_beacons(hapd->iface); ++ } ++#endif ++ ++ if(psta->flags & WLAN_STA_NONERP) ++ { ++ if(!psta->nonerp_set) ++ { ++ psta->nonerp_set = 1; ++ ++ pmlmepriv->num_sta_non_erp++; ++ ++ if (pmlmepriv->num_sta_non_erp == 1) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE); ++ } ++ } ++ ++ } ++ else ++ { ++ if(psta->nonerp_set) ++ { ++ psta->nonerp_set = 0; ++ ++ pmlmepriv->num_sta_non_erp--; ++ ++ if (pmlmepriv->num_sta_non_erp == 0) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE); ++ } ++ } ++ ++ } ++ ++ ++#if 0 ++ if (!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT) && ++ !psta->no_short_slot_time_set) { ++ psta->no_short_slot_time_set = 1; ++ pmlmepriv->num_sta_no_short_slot_time++; ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_slot_time == 1)) ++ ieee802_11_set_beacons(hapd->iface); ++ } ++#endif ++ ++ if(!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT)) ++ { ++ if(!psta->no_short_slot_time_set) ++ { ++ psta->no_short_slot_time_set = 1; ++ ++ pmlmepriv->num_sta_no_short_slot_time++; ++ ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_slot_time == 1)) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ ++ } ++ } ++ else ++ { ++ if(psta->no_short_slot_time_set) ++ { ++ psta->no_short_slot_time_set = 0; ++ ++ pmlmepriv->num_sta_no_short_slot_time--; ++ ++ if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && ++ (pmlmepriv->num_sta_no_short_slot_time == 0)) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ } ++ } ++ ++#ifdef CONFIG_80211N_HT ++ ++ if (psta->flags & WLAN_STA_HT) ++ { ++ u16 ht_capab = le16_to_cpu(psta->htpriv.ht_cap.cap_info); ++ ++ DBG_871X("HT: STA " MAC_FMT " HT Capabilities " ++ "Info: 0x%04x\n", MAC_ARG(psta->hwaddr), ht_capab); ++ ++ if (psta->no_ht_set) { ++ psta->no_ht_set = 0; ++ pmlmepriv->num_sta_no_ht--; ++ } ++ ++ if ((ht_capab & IEEE80211_HT_CAP_GRN_FLD) == 0) { ++ if (!psta->no_ht_gf_set) { ++ psta->no_ht_gf_set = 1; ++ pmlmepriv->num_sta_ht_no_gf++; ++ } ++ DBG_871X("%s STA " MAC_FMT " - no " ++ "greenfield, num of non-gf stations %d\n", ++ __FUNCTION__, MAC_ARG(psta->hwaddr), ++ pmlmepriv->num_sta_ht_no_gf); ++ } ++ ++ if ((ht_capab & IEEE80211_HT_CAP_SUP_WIDTH) == 0) { ++ if (!psta->ht_20mhz_set) { ++ psta->ht_20mhz_set = 1; ++ pmlmepriv->num_sta_ht_20mhz++; ++ } ++ DBG_871X("%s STA " MAC_FMT " - 20 MHz HT, " ++ "num of 20MHz HT STAs %d\n", ++ __FUNCTION__, MAC_ARG(psta->hwaddr), ++ pmlmepriv->num_sta_ht_20mhz); ++ } ++ ++ } ++ else ++ { ++ if (!psta->no_ht_set) { ++ psta->no_ht_set = 1; ++ pmlmepriv->num_sta_no_ht++; ++ } ++ if(pmlmepriv->htpriv.ht_option == _TRUE) { ++ DBG_871X("%s STA " MAC_FMT ++ " - no HT, num of non-HT stations %d\n", ++ __FUNCTION__, MAC_ARG(psta->hwaddr), ++ pmlmepriv->num_sta_no_ht); ++ } ++ } ++ ++ if (rtw_ht_operation_update(padapter) > 0) ++ { ++ update_beacon(padapter, _HT_CAPABILITY_IE_, NULL, _FALSE); ++ update_beacon(padapter, _HT_ADD_INFO_IE_, NULL, _TRUE); ++ } ++ ++#endif /* CONFIG_80211N_HT */ ++ ++ //update associcated stations cap. ++ associated_clients_update(padapter, beacon_updated); ++ ++ DBG_871X("%s, updated=%d\n", __func__, beacon_updated); ++ ++} ++ ++u8 bss_cap_update_on_sta_leave(_adapter *padapter, struct sta_info *psta) ++{ ++ u8 beacon_updated = _FALSE; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ if(!psta) ++ return beacon_updated; ++ ++ if (psta->no_short_preamble_set) { ++ psta->no_short_preamble_set = 0; ++ pmlmepriv->num_sta_no_short_preamble--; ++ if (pmlmeext->cur_wireless_mode > WIRELESS_11B ++ && pmlmepriv->num_sta_no_short_preamble == 0) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ } ++ ++ if (psta->nonerp_set) { ++ psta->nonerp_set = 0; ++ pmlmepriv->num_sta_non_erp--; ++ if (pmlmepriv->num_sta_non_erp == 0) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE); ++ } ++ } ++ ++ if (psta->no_short_slot_time_set) { ++ psta->no_short_slot_time_set = 0; ++ pmlmepriv->num_sta_no_short_slot_time--; ++ if (pmlmeext->cur_wireless_mode > WIRELESS_11B ++ && pmlmepriv->num_sta_no_short_slot_time == 0) ++ { ++ beacon_updated = _TRUE; ++ update_beacon(padapter, 0xFF, NULL, _TRUE); ++ } ++ } ++ ++#ifdef CONFIG_80211N_HT ++ ++ if (psta->no_ht_gf_set) { ++ psta->no_ht_gf_set = 0; ++ pmlmepriv->num_sta_ht_no_gf--; ++ } ++ ++ if (psta->no_ht_set) { ++ psta->no_ht_set = 0; ++ pmlmepriv->num_sta_no_ht--; ++ } ++ ++ if (psta->ht_20mhz_set) { ++ psta->ht_20mhz_set = 0; ++ pmlmepriv->num_sta_ht_20mhz--; ++ } ++ ++ if (rtw_ht_operation_update(padapter) > 0) ++ { ++ update_beacon(padapter, _HT_CAPABILITY_IE_, NULL, _FALSE); ++ update_beacon(padapter, _HT_ADD_INFO_IE_, NULL, _TRUE); ++ } ++ ++#endif /* CONFIG_80211N_HT */ ++ ++ //update associcated stations cap. ++ //associated_clients_update(padapter, beacon_updated); //move it to avoid deadlock ++ ++ DBG_871X("%s, updated=%d\n", __func__, beacon_updated); ++ ++ return beacon_updated; ++ ++} ++ ++u8 ap_free_sta(_adapter *padapter, struct sta_info *psta, bool active, u16 reason) ++{ ++ _irqL irqL; ++ u8 beacon_updated = _FALSE; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ if(!psta) ++ return beacon_updated; ++ ++ if (active == _TRUE) ++ { ++#ifdef CONFIG_80211N_HT ++ //tear down Rx AMPDU ++ send_delba(padapter, 0, psta->hwaddr);// recipient ++ ++ //tear down TX AMPDU ++ send_delba(padapter, 1, psta->hwaddr);// // originator ++ ++#endif //CONFIG_80211N_HT ++ ++ issue_deauth(padapter, psta->hwaddr, reason); ++ } ++ ++ psta->htpriv.agg_enable_bitmap = 0x0;//reset ++ psta->htpriv.candidate_tid_bitmap = 0x0;//reset ++ ++ ++ //report_del_sta_event(padapter, psta->hwaddr, reason); ++ ++ //clear cam entry / key ++ //clear_cam_entry(padapter, (psta->mac_id + 3)); ++ rtw_clearstakey_cmd(padapter, (u8*)psta, (u8)(psta->mac_id + 3), _TRUE); ++ ++ ++ _enter_critical_bh(&psta->lock, &irqL); ++ psta->state &= ~_FW_LINKED; ++ _exit_critical_bh(&psta->lock, &irqL); ++ ++ #ifdef CONFIG_IOCTL_CFG80211 ++ if (1) { ++ #ifdef COMPAT_KERNEL_RELEASE ++ rtw_cfg80211_indicate_sta_disassoc(padapter, psta->hwaddr, reason); ++ #elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ rtw_cfg80211_indicate_sta_disassoc(padapter, psta->hwaddr, reason); ++ #else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ /* will call rtw_cfg80211_indicate_sta_disassoc() in cmd_thread for old API context */ ++ #endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ } else ++ #endif //CONFIG_IOCTL_CFG80211 ++ { ++ rtw_indicate_sta_disassoc_event(padapter, psta); ++ } ++ ++ report_del_sta_event(padapter, psta->hwaddr, reason); ++ ++ beacon_updated = bss_cap_update_on_sta_leave(padapter, psta); ++ ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(padapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ ++ return beacon_updated; ++ ++} ++ ++int rtw_ap_inform_ch_switch(_adapter *padapter, u8 new_ch, u8 ch_offset) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ int ret=0; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ return ret; ++ ++ DBG_871X(FUNC_NDEV_FMT" with ch:%u, offset:%u\n", ++ FUNC_NDEV_ARG(padapter->pnetdev), new_ch, ch_offset); ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ /* for each sta in asoc_queue */ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ plist = get_next(plist); ++ ++ issue_action_spct_ch_switch(padapter, psta->hwaddr, new_ch, ch_offset); ++ psta->expire_to = ((pstapriv->expire_to * 2) > 5) ? 5 : (pstapriv->expire_to * 2); ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ issue_action_spct_ch_switch(padapter, bc_addr, new_ch, ch_offset); ++ ++ return ret; ++} ++ ++int rtw_sta_flush(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ int ret=0; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++ u8 chk_alive_num = 0; ++ char chk_alive_list[NUM_STA]; ++ int i; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(padapter->pnetdev)); ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ return ret; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) { ++ int stainfo_offset; ++ ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ plist = get_next(plist); ++ ++ /* Remove sta from asoc_list */ ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ ++ /* Keep sta for ap_free_sta() beyond this asoc_list loop */ ++ stainfo_offset = rtw_stainfo_offset(pstapriv, psta); ++ if (stainfo_offset_valid(stainfo_offset)) { ++ chk_alive_list[chk_alive_num++] = stainfo_offset; ++ } ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ ++ /* For each sta in chk_alive_list, call ap_free_sta */ ++ for (i = 0; i < chk_alive_num; i++) { ++ psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]); ++ ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING); ++ } ++ ++ issue_deauth(padapter, bc_addr, WLAN_REASON_DEAUTH_LEAVING); ++ ++ associated_clients_update(padapter, _TRUE); ++ ++ return ret; ++ ++} ++ ++/* called > TSR LEVEL for USB or SDIO Interface*/ ++void sta_info_update(_adapter *padapter, struct sta_info *psta) ++{ ++ int flags = psta->flags; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ ++ //update wmm cap. ++ if(WLAN_STA_WME&flags) ++ psta->qos_option = 1; ++ else ++ psta->qos_option = 0; ++ ++ if(pmlmepriv->qospriv.qos_option == 0) ++ psta->qos_option = 0; ++ ++ ++#ifdef CONFIG_80211N_HT ++ //update 802.11n ht cap. ++ if(WLAN_STA_HT&flags) ++ { ++ psta->htpriv.ht_option = _TRUE; ++ psta->qos_option = 1; ++ } ++ else ++ { ++ psta->htpriv.ht_option = _FALSE; ++ } ++ ++ if(pmlmepriv->htpriv.ht_option == _FALSE) ++ psta->htpriv.ht_option = _FALSE; ++#endif ++ ++ ++ update_sta_info_apmode(padapter, psta); ++ ++ ++} ++ ++/* called >= TSR LEVEL for USB or SDIO Interface*/ ++void ap_sta_info_defer_update(_adapter *padapter, struct sta_info *psta) ++{ ++ if(psta->state & _FW_LINKED) ++ { ++ //add ratid ++ add_RATid(padapter, psta); ++ } ++} ++ ++/* restore hw setting from sw data structures */ ++void rtw_ap_restore_network(_adapter *padapter) ++{ ++ struct mlme_priv *mlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ struct sta_info *psta; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ _irqL irqL; ++ _list *phead, *plist; ++ u8 chk_alive_num = 0; ++ char chk_alive_list[NUM_STA]; ++ int i; ++ ++ rtw_setopmode_cmd(padapter, Ndis802_11APMode); ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++ start_bss_network(padapter, (u8*)&mlmepriv->cur_network.network); ++ ++ if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) || ++ (padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)) ++ { ++ /* restore group key, WEP keys is restored in ips_leave() */ ++ rtw_set_key(padapter, psecuritypriv, psecuritypriv->dot118021XGrpKeyid, 0); ++ } ++ ++ /* per sta pairwise key and settings */ ++ if((padapter->securitypriv.dot11PrivacyAlgrthm != _TKIP_) && ++ (padapter->securitypriv.dot11PrivacyAlgrthm != _AES_)) { ++ return; ++ } ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) { ++ int stainfo_offset; ++ ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ plist = get_next(plist); ++ ++ stainfo_offset = rtw_stainfo_offset(pstapriv, psta); ++ if (stainfo_offset_valid(stainfo_offset)) { ++ chk_alive_list[chk_alive_num++] = stainfo_offset; ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ for (i = 0; i < chk_alive_num; i++) { ++ psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]); ++ ++ if (psta == NULL) { ++ DBG_871X(FUNC_ADPT_FMT" sta_info is null\n", FUNC_ADPT_ARG(padapter)); ++ } else if (psta->state &_FW_LINKED) { ++ Update_RA_Entry(padapter, psta->mac_id); ++ //pairwise key ++ rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE); ++ } ++ } ++ ++} ++ ++void start_ap_mode(_adapter *padapter) ++{ ++ int i; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ ++ pmlmepriv->update_bcn = _FALSE; ++ ++ //init_mlme_ap_info(padapter); ++ pmlmeext->bstart_bss = _FALSE; ++ ++ pmlmepriv->num_sta_non_erp = 0; ++ ++ pmlmepriv->num_sta_no_short_slot_time = 0; ++ ++ pmlmepriv->num_sta_no_short_preamble = 0; ++ ++ pmlmepriv->num_sta_ht_no_gf = 0; ++ ++ pmlmepriv->num_sta_no_ht = 0; ++ ++ pmlmepriv->num_sta_ht_20mhz = 0; ++ ++ pmlmepriv->olbc = _FALSE; ++ ++ pmlmepriv->olbc_ht = _FALSE; ++ ++#ifdef CONFIG_80211N_HT ++ pmlmepriv->ht_op_mode = 0; ++#endif ++ ++ for(i=0; ista_aid[i] = NULL; ++ ++ pmlmepriv->wps_beacon_ie = NULL; ++ pmlmepriv->wps_probe_resp_ie = NULL; ++ pmlmepriv->wps_assoc_resp_ie = NULL; ++ ++ pmlmepriv->p2p_beacon_ie = NULL; ++ pmlmepriv->p2p_probe_resp_ie = NULL; ++ ++ ++ //for ACL ++ _rtw_init_listhead(&(pacl_list->acl_node_q.queue)); ++ pacl_list->num = 0; ++ pacl_list->mode = 0; ++ for(i = 0; i < NUM_ACL; i++) ++ { ++ _rtw_init_listhead(&pacl_list->aclnode[i].list); ++ pacl_list->aclnode[i].valid = _FALSE; ++ } ++ ++} ++ ++void stop_ap_mode(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ struct rtw_wlan_acl_node *paclnode; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ _queue *pacl_node_q =&pacl_list->acl_node_q; ++ ++ pmlmepriv->update_bcn = _FALSE; ++ pmlmeext->bstart_bss = _FALSE; ++ //_rtw_spinlock_free(&pmlmepriv->bcn_update_lock); ++ ++ //reset and init security priv , this can refine with rtw_reset_securitypriv ++ _rtw_memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv)); ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11WEPDisabled; ++ ++ //for ACL ++ _enter_critical_bh(&(pacl_node_q->lock), &irqL); ++ phead = get_list_head(pacl_node_q); ++ plist = get_next(phead); ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list); ++ plist = get_next(plist); ++ ++ if(paclnode->valid == _TRUE) ++ { ++ paclnode->valid = _FALSE; ++ ++ rtw_list_delete(&paclnode->list); ++ ++ pacl_list->num--; ++ } ++ } ++ _exit_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ DBG_871X("%s, free acl_node_queue, num=%d\n", __func__, pacl_list->num); ++ ++ rtw_sta_flush(padapter); ++ ++ //free_assoc_sta_resources ++ rtw_free_all_stainfo(padapter); ++ ++ psta = rtw_get_bcmc_stainfo(padapter); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(padapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ rtw_init_bcmc_stainfo(padapter); ++ ++ rtw_free_mlme_priv_ie_data(pmlmepriv); ++ ++} ++ ++#endif //CONFIG_NATIVEAP_MLME ++#endif //CONFIG_AP_MODE +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c +new file mode 100644 +index 000000000000..a5ac60130a3c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c +@@ -0,0 +1,1699 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_BR_EXT_C_ ++ ++#ifdef __KERNEL__ ++#include ++#include ++#include ++#include ++#include ++#include ++#endif ++ ++#if 1 // rtw_wifi_driver ++#include ++#include ++#include "rtw_br_ext.h" ++#else // rtw_wifi_driver ++#include "./8192cd_cfg.h" ++ ++#ifndef __KERNEL__ ++#include "./sys-support.h" ++#endif ++ ++#include "./8192cd.h" ++#include "./8192cd_headers.h" ++#include "./8192cd_br_ext.h" ++#include "./8192cd_debug.h" ++#endif // rtw_wifi_driver ++ ++#ifdef CL_IPV6_PASS ++#ifdef __KERNEL__ ++#include ++#include ++#include ++#include ++#endif ++#endif ++ ++#ifdef CONFIG_BR_EXT ++ ++//#define BR_EXT_DEBUG ++ ++#define NAT25_IPV4 01 ++#define NAT25_IPV6 02 ++#define NAT25_IPX 03 ++#define NAT25_APPLE 04 ++#define NAT25_PPPOE 05 ++ ++#define RTL_RELAY_TAG_LEN (ETH_ALEN) ++#define TAG_HDR_LEN 4 ++ ++#define MAGIC_CODE 0x8186 ++#define MAGIC_CODE_LEN 2 ++#define WAIT_TIME_PPPOE 5 // waiting time for pppoe server in sec ++ ++/*----------------------------------------------------------------- ++ How database records network address: ++ 0 1 2 3 4 5 6 7 8 9 10 ++ |----|----|----|----|----|----|----|----|----|----|----| ++ IPv4 |type| | IP addr | ++ IPX |type| Net addr | Node addr | ++ IPX |type| Net addr |Sckt addr| ++ Apple |type| Network |node| ++ PPPoE |type| SID | AC MAC | ++-----------------------------------------------------------------*/ ++ ++ ++//Find a tag in pppoe frame and return the pointer ++static __inline__ unsigned char *__nat25_find_pppoe_tag(struct pppoe_hdr *ph, unsigned short type) ++{ ++ unsigned char *cur_ptr, *start_ptr; ++ unsigned short tagLen, tagType; ++ ++ start_ptr = cur_ptr = (unsigned char *)ph->tag; ++ while((cur_ptr - start_ptr) < ntohs(ph->length)) { ++ // prevent un-alignment access ++ tagType = (unsigned short)((cur_ptr[0] << 8) + cur_ptr[1]); ++ tagLen = (unsigned short)((cur_ptr[2] << 8) + cur_ptr[3]); ++ if(tagType == type) ++ return cur_ptr; ++ cur_ptr = cur_ptr + TAG_HDR_LEN + tagLen; ++ } ++ return 0; ++} ++ ++ ++static __inline__ int __nat25_add_pppoe_tag(struct sk_buff *skb, struct pppoe_tag *tag) ++{ ++ struct pppoe_hdr *ph = (struct pppoe_hdr *)(skb->data + ETH_HLEN); ++ int data_len; ++ ++ data_len = tag->tag_len + TAG_HDR_LEN; ++ if (skb_tailroom(skb) < data_len) { ++ _DEBUG_ERR("skb_tailroom() failed in add SID tag!\n"); ++ return -1; ++ } ++ ++ skb_put(skb, data_len); ++ // have a room for new tag ++ memmove(((unsigned char *)ph->tag + data_len), (unsigned char *)ph->tag, ntohs(ph->length)); ++ ph->length = htons(ntohs(ph->length) + data_len); ++ memcpy((unsigned char *)ph->tag, tag, data_len); ++ return data_len; ++} ++ ++static int skb_pull_and_merge(struct sk_buff *skb, unsigned char *src, int len) ++{ ++ int tail_len; ++ unsigned long end, tail; ++ ++ if ((src+len) > skb_tail_pointer(skb) || skb->len < len) ++ return -1; ++ ++ tail = (unsigned long)skb_tail_pointer(skb); ++ end = (unsigned long)src+len; ++ if (tail < end) ++ return -1; ++ ++ tail_len = (int)(tail-end); ++ if (tail_len > 0) ++ memmove(src, src+len, tail_len); ++ ++ skb_trim(skb, skb->len-len); ++ return 0; ++} ++ ++static __inline__ unsigned long __nat25_timeout(_adapter *priv) ++{ ++ unsigned long timeout; ++ ++ timeout = jiffies - NAT25_AGEING_TIME*HZ; ++ ++ return timeout; ++} ++ ++ ++static __inline__ int __nat25_has_expired(_adapter *priv, ++ struct nat25_network_db_entry *fdb) ++{ ++ if(time_before_eq(fdb->ageing_timer, __nat25_timeout(priv))) ++ return 1; ++ ++ return 0; ++} ++ ++ ++static __inline__ void __nat25_generate_ipv4_network_addr(unsigned char *networkAddr, ++ unsigned int *ipAddr) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_IPV4; ++ memcpy(networkAddr+7, (unsigned char *)ipAddr, 4); ++} ++ ++ ++static __inline__ void __nat25_generate_ipx_network_addr_with_node(unsigned char *networkAddr, ++ unsigned int *ipxNetAddr, unsigned char *ipxNodeAddr) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_IPX; ++ memcpy(networkAddr+1, (unsigned char *)ipxNetAddr, 4); ++ memcpy(networkAddr+5, ipxNodeAddr, 6); ++} ++ ++ ++static __inline__ void __nat25_generate_ipx_network_addr_with_socket(unsigned char *networkAddr, ++ unsigned int *ipxNetAddr, unsigned short *ipxSocketAddr) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_IPX; ++ memcpy(networkAddr+1, (unsigned char *)ipxNetAddr, 4); ++ memcpy(networkAddr+5, (unsigned char *)ipxSocketAddr, 2); ++} ++ ++ ++static __inline__ void __nat25_generate_apple_network_addr(unsigned char *networkAddr, ++ unsigned short *network, unsigned char *node) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_APPLE; ++ memcpy(networkAddr+1, (unsigned char *)network, 2); ++ networkAddr[3] = *node; ++} ++ ++ ++static __inline__ void __nat25_generate_pppoe_network_addr(unsigned char *networkAddr, ++ unsigned char *ac_mac, unsigned short *sid) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_PPPOE; ++ memcpy(networkAddr+1, (unsigned char *)sid, 2); ++ memcpy(networkAddr+3, (unsigned char *)ac_mac, 6); ++} ++ ++ ++#ifdef CL_IPV6_PASS ++static void __nat25_generate_ipv6_network_addr(unsigned char *networkAddr, ++ unsigned int *ipAddr) ++{ ++ memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN); ++ ++ networkAddr[0] = NAT25_IPV6; ++ memcpy(networkAddr+1, (unsigned char *)ipAddr, 16); ++} ++ ++ ++static unsigned char *scan_tlv(unsigned char *data, int len, unsigned char tag, unsigned char len8b) ++{ ++ while (len > 0) { ++ if (*data == tag && *(data+1) == len8b && len >= len8b*8) ++ return data+2; ++ ++ len -= (*(data+1))*8; ++ data += (*(data+1))*8; ++ } ++ return NULL; ++} ++ ++ ++static int update_nd_link_layer_addr(unsigned char *data, int len, unsigned char *replace_mac) ++{ ++ struct icmp6hdr *icmphdr = (struct icmp6hdr *)data; ++ unsigned char *mac; ++ ++ if (icmphdr->icmp6_type == NDISC_ROUTER_SOLICITATION) { ++ if (len >= 8) { ++ mac = scan_tlv(&data[8], len-8, 1, 1); ++ if (mac) { ++ _DEBUG_INFO("Router Solicitation, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n", ++ mac[0],mac[1],mac[2],mac[3],mac[4],mac[5], ++ replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]); ++ memcpy(mac, replace_mac, 6); ++ return 1; ++ } ++ } ++ } ++ else if (icmphdr->icmp6_type == NDISC_ROUTER_ADVERTISEMENT) { ++ if (len >= 16) { ++ mac = scan_tlv(&data[16], len-16, 1, 1); ++ if (mac) { ++ _DEBUG_INFO("Router Advertisement, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n", ++ mac[0],mac[1],mac[2],mac[3],mac[4],mac[5], ++ replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]); ++ memcpy(mac, replace_mac, 6); ++ return 1; ++ } ++ } ++ } ++ else if (icmphdr->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION) { ++ if (len >= 24) { ++ mac = scan_tlv(&data[24], len-24, 1, 1); ++ if (mac) { ++ _DEBUG_INFO("Neighbor Solicitation, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n", ++ mac[0],mac[1],mac[2],mac[3],mac[4],mac[5], ++ replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]); ++ memcpy(mac, replace_mac, 6); ++ return 1; ++ } ++ } ++ } ++ else if (icmphdr->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT) { ++ if (len >= 24) { ++ mac = scan_tlv(&data[24], len-24, 2, 1); ++ if (mac) { ++ _DEBUG_INFO("Neighbor Advertisement, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n", ++ mac[0],mac[1],mac[2],mac[3],mac[4],mac[5], ++ replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]); ++ memcpy(mac, replace_mac, 6); ++ return 1; ++ } ++ } ++ } ++ else if (icmphdr->icmp6_type == NDISC_REDIRECT) { ++ if (len >= 40) { ++ mac = scan_tlv(&data[40], len-40, 2, 1); ++ if (mac) { ++ _DEBUG_INFO("Redirect, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n", ++ mac[0],mac[1],mac[2],mac[3],mac[4],mac[5], ++ replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]); ++ memcpy(mac, replace_mac, 6); ++ return 1; ++ } ++ } ++ } ++ return 0; ++} ++ ++ ++static void convert_ipv6_mac_to_mc(struct sk_buff *skb) ++{ ++ struct ipv6hdr *iph = (struct ipv6hdr *)(skb->data + ETH_HLEN); ++ unsigned char *dst_mac = skb->data; ++ ++ //dst_mac[0] = 0xff; ++ //dst_mac[1] = 0xff; ++ /*modified by qinjunjie,ipv6 multicast address ix 0x33-33-xx-xx-xx-xx*/ ++ dst_mac[0] = 0x33; ++ dst_mac[1] = 0x33; ++ memcpy(&dst_mac[2], &iph->daddr.s6_addr32[3], 4); ++ #if defined(__LINUX_2_6__) ++ /*modified by qinjunjie,warning:should not remove next line*/ ++ skb->pkt_type = PACKET_MULTICAST; ++ #endif ++} ++#endif /* CL_IPV6_PASS */ ++ ++ ++static __inline__ int __nat25_network_hash(unsigned char *networkAddr) ++{ ++ if(networkAddr[0] == NAT25_IPV4) ++ { ++ unsigned long x; ++ ++ x = networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10]; ++ ++ return x & (NAT25_HASH_SIZE - 1); ++ } ++ else if(networkAddr[0] == NAT25_IPX) ++ { ++ unsigned long x; ++ ++ x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^ ++ networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10]; ++ ++ return x & (NAT25_HASH_SIZE - 1); ++ } ++ else if(networkAddr[0] == NAT25_APPLE) ++ { ++ unsigned long x; ++ ++ x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3]; ++ ++ return x & (NAT25_HASH_SIZE - 1); ++ } ++ else if(networkAddr[0] == NAT25_PPPOE) ++ { ++ unsigned long x; ++ ++ x = networkAddr[0] ^ networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^ networkAddr[6] ^ networkAddr[7] ^ networkAddr[8]; ++ ++ return x & (NAT25_HASH_SIZE - 1); ++ } ++#ifdef CL_IPV6_PASS ++ else if(networkAddr[0] == NAT25_IPV6) ++ { ++ unsigned long x; ++ ++ x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^ ++ networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10] ^ ++ networkAddr[11] ^ networkAddr[12] ^ networkAddr[13] ^ networkAddr[14] ^ networkAddr[15] ^ ++ networkAddr[16]; ++ ++ return x & (NAT25_HASH_SIZE - 1); ++ } ++#endif ++ else ++ { ++ unsigned long x = 0; ++ int i; ++ ++ for (i=0; ibr_ext_lock, &irqL); ++ ++ ent->next_hash = priv->nethash[hash]; ++ if(ent->next_hash != NULL) ++ ent->next_hash->pprev_hash = &ent->next_hash; ++ priv->nethash[hash] = ent; ++ ent->pprev_hash = &priv->nethash[hash]; ++ ++ //_exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++static __inline__ void __network_hash_unlink(struct nat25_network_db_entry *ent) ++{ ++ // Caller must _enter_critical_bh already! ++ //_irqL irqL; ++ //_enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ *(ent->pprev_hash) = ent->next_hash; ++ if(ent->next_hash != NULL) ++ ent->next_hash->pprev_hash = ent->pprev_hash; ++ ent->next_hash = NULL; ++ ent->pprev_hash = NULL; ++ ++ //_exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++static int __nat25_db_network_lookup_and_replace(_adapter *priv, ++ struct sk_buff *skb, unsigned char *networkAddr) ++{ ++ struct nat25_network_db_entry *db; ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ db = priv->nethash[__nat25_network_hash(networkAddr)]; ++ while (db != NULL) ++ { ++ if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) ++ { ++ if(!__nat25_has_expired(priv, db)) ++ { ++ // replace the destination mac address ++ memcpy(skb->data, db->macAddr, ETH_ALEN); ++ atomic_inc(&db->use_count); ++ ++#ifdef CL_IPV6_PASS ++ DEBUG_INFO("NAT25: Lookup M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x" ++ "%02x%02x%02x%02x%02x%02x\n", ++ db->macAddr[0], ++ db->macAddr[1], ++ db->macAddr[2], ++ db->macAddr[3], ++ db->macAddr[4], ++ db->macAddr[5], ++ db->networkAddr[0], ++ db->networkAddr[1], ++ db->networkAddr[2], ++ db->networkAddr[3], ++ db->networkAddr[4], ++ db->networkAddr[5], ++ db->networkAddr[6], ++ db->networkAddr[7], ++ db->networkAddr[8], ++ db->networkAddr[9], ++ db->networkAddr[10], ++ db->networkAddr[11], ++ db->networkAddr[12], ++ db->networkAddr[13], ++ db->networkAddr[14], ++ db->networkAddr[15], ++ db->networkAddr[16]); ++#else ++ DEBUG_INFO("NAT25: Lookup M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", ++ db->macAddr[0], ++ db->macAddr[1], ++ db->macAddr[2], ++ db->macAddr[3], ++ db->macAddr[4], ++ db->macAddr[5], ++ db->networkAddr[0], ++ db->networkAddr[1], ++ db->networkAddr[2], ++ db->networkAddr[3], ++ db->networkAddr[4], ++ db->networkAddr[5], ++ db->networkAddr[6], ++ db->networkAddr[7], ++ db->networkAddr[8], ++ db->networkAddr[9], ++ db->networkAddr[10]); ++#endif ++ } ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return 1; ++ } ++ ++ db = db->next_hash; ++ } ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return 0; ++} ++ ++ ++static void __nat25_db_network_insert(_adapter *priv, ++ unsigned char *macAddr, unsigned char *networkAddr) ++{ ++ struct nat25_network_db_entry *db; ++ int hash; ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ hash = __nat25_network_hash(networkAddr); ++ db = priv->nethash[hash]; ++ while (db != NULL) ++ { ++ if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) ++ { ++ memcpy(db->macAddr, macAddr, ETH_ALEN); ++ db->ageing_timer = jiffies; ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return; ++ } ++ ++ db = db->next_hash; ++ } ++ ++ db = (struct nat25_network_db_entry *) rtw_malloc(sizeof(*db)); ++ if(db == NULL) { ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return; ++ } ++ ++ memcpy(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN); ++ memcpy(db->macAddr, macAddr, ETH_ALEN); ++ atomic_set(&db->use_count, 1); ++ db->ageing_timer = jiffies; ++ ++ __network_hash_link(priv, db, hash); ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++static void __nat25_db_print(_adapter *priv) ++{ ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++#ifdef BR_EXT_DEBUG ++ static int counter = 0; ++ int i, j; ++ struct nat25_network_db_entry *db; ++ ++ counter++; ++ if((counter % 16) != 0) ++ return; ++ ++ for(i=0, j=0; inethash[i]; ++ ++ while (db != NULL) ++ { ++#ifdef CL_IPV6_PASS ++ panic_printk("NAT25: DB(%d) H(%02d) C(%d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x" ++ "%02x%02x%02x%02x%02x%02x\n", ++ j, ++ i, ++ atomic_read(&db->use_count), ++ db->macAddr[0], ++ db->macAddr[1], ++ db->macAddr[2], ++ db->macAddr[3], ++ db->macAddr[4], ++ db->macAddr[5], ++ db->networkAddr[0], ++ db->networkAddr[1], ++ db->networkAddr[2], ++ db->networkAddr[3], ++ db->networkAddr[4], ++ db->networkAddr[5], ++ db->networkAddr[6], ++ db->networkAddr[7], ++ db->networkAddr[8], ++ db->networkAddr[9], ++ db->networkAddr[10], ++ db->networkAddr[11], ++ db->networkAddr[12], ++ db->networkAddr[13], ++ db->networkAddr[14], ++ db->networkAddr[15], ++ db->networkAddr[16]); ++#else ++ panic_printk("NAT25: DB(%d) H(%02d) C(%d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", ++ j, ++ i, ++ atomic_read(&db->use_count), ++ db->macAddr[0], ++ db->macAddr[1], ++ db->macAddr[2], ++ db->macAddr[3], ++ db->macAddr[4], ++ db->macAddr[5], ++ db->networkAddr[0], ++ db->networkAddr[1], ++ db->networkAddr[2], ++ db->networkAddr[3], ++ db->networkAddr[4], ++ db->networkAddr[5], ++ db->networkAddr[6], ++ db->networkAddr[7], ++ db->networkAddr[8], ++ db->networkAddr[9], ++ db->networkAddr[10]); ++#endif ++ j++; ++ ++ db = db->next_hash; ++ } ++ } ++#endif ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++ ++ ++/* ++ * NAT2.5 interface ++ */ ++ ++void nat25_db_cleanup(_adapter *priv) ++{ ++ int i; ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ for(i=0; inethash[i]; ++ while (f != NULL) { ++ struct nat25_network_db_entry *g; ++ ++ g = f->next_hash; ++ if(priv->scdb_entry == f) ++ { ++ memset(priv->scdb_mac, 0, ETH_ALEN); ++ memset(priv->scdb_ip, 0, 4); ++ priv->scdb_entry = NULL; ++ } ++ __network_hash_unlink(f); ++ rtw_mfree((u8 *) f, sizeof(struct nat25_network_db_entry)); ++ ++ f = g; ++ } ++ } ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++void nat25_db_expire(_adapter *priv) ++{ ++ int i; ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ //if(!priv->ethBrExtInfo.nat25_disable) ++ { ++ for (i=0; inethash[i]; ++ ++ while (f != NULL) ++ { ++ struct nat25_network_db_entry *g; ++ g = f->next_hash; ++ ++ if(__nat25_has_expired(priv, f)) ++ { ++ if(atomic_dec_and_test(&f->use_count)) ++ { ++#ifdef BR_EXT_DEBUG ++#ifdef CL_IPV6_PASS ++ panic_printk("NAT25 Expire H(%02d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x" ++ "%02x%02x%02x%02x%02x%02x\n", ++ i, ++ f->macAddr[0], ++ f->macAddr[1], ++ f->macAddr[2], ++ f->macAddr[3], ++ f->macAddr[4], ++ f->macAddr[5], ++ f->networkAddr[0], ++ f->networkAddr[1], ++ f->networkAddr[2], ++ f->networkAddr[3], ++ f->networkAddr[4], ++ f->networkAddr[5], ++ f->networkAddr[6], ++ f->networkAddr[7], ++ f->networkAddr[8], ++ f->networkAddr[9], ++ f->networkAddr[10], ++ f->networkAddr[11], ++ f->networkAddr[12], ++ f->networkAddr[13], ++ f->networkAddr[14], ++ f->networkAddr[15], ++ f->networkAddr[16]); ++#else ++ ++ panic_printk("NAT25 Expire H(%02d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", ++ i, ++ f->macAddr[0], ++ f->macAddr[1], ++ f->macAddr[2], ++ f->macAddr[3], ++ f->macAddr[4], ++ f->macAddr[5], ++ f->networkAddr[0], ++ f->networkAddr[1], ++ f->networkAddr[2], ++ f->networkAddr[3], ++ f->networkAddr[4], ++ f->networkAddr[5], ++ f->networkAddr[6], ++ f->networkAddr[7], ++ f->networkAddr[8], ++ f->networkAddr[9], ++ f->networkAddr[10]); ++#endif ++#endif ++ if(priv->scdb_entry == f) ++ { ++ memset(priv->scdb_mac, 0, ETH_ALEN); ++ memset(priv->scdb_ip, 0, 4); ++ priv->scdb_entry = NULL; ++ } ++ __network_hash_unlink(f); ++ rtw_mfree((u8 *) f, sizeof(struct nat25_network_db_entry)); ++ } ++ } ++ ++ f = g; ++ } ++ } ++ } ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++} ++ ++ ++#ifdef SUPPORT_TX_MCAST2UNI ++static int checkIPMcAndReplace(_adapter *priv, struct sk_buff *skb, unsigned int *dst_ip) ++{ ++ struct stat_info *pstat; ++ struct list_head *phead, *plist; ++ int i; ++ ++ phead = &priv->asoc_list; ++ plist = phead->next; ++ ++ while (plist != phead) { ++ pstat = list_entry(plist, struct stat_info, asoc_list); ++ plist = plist->next; ++ ++ if (pstat->ipmc_num == 0) ++ continue; ++ ++ for (i=0; iipmc[i].used && !memcmp(&pstat->ipmc[i].mcmac[3], ((unsigned char *)dst_ip)+1, 3)) { ++ memcpy(skb->data, pstat->ipmc[i].mcmac, ETH_ALEN); ++ return 1; ++ } ++ } ++ } ++ return 0; ++} ++#endif ++ ++int nat25_db_handle(_adapter *priv, struct sk_buff *skb, int method) ++{ ++ unsigned short protocol; ++ unsigned char networkAddr[MAX_NETWORK_ADDR_LEN]; ++ ++ if(skb == NULL) ++ return -1; ++ ++ if((method <= NAT25_MIN) || (method >= NAT25_MAX)) ++ return -1; ++ ++ protocol = *((unsigned short *)(skb->data + 2 * ETH_ALEN)); ++ ++ /*---------------------------------------------------*/ ++ /* Handle IP frame */ ++ /*---------------------------------------------------*/ ++ if(protocol == __constant_htons(ETH_P_IP)) ++ { ++ struct iphdr* iph = (struct iphdr *)(skb->data + ETH_HLEN); ++ ++ if(((unsigned char*)(iph) + (iph->ihl<<2)) >= (skb->data + ETH_HLEN + skb->len)) ++ { ++ DEBUG_WARN("NAT25: malformed IP packet !\n"); ++ return -1; ++ } ++ ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return -1; ++ ++ case NAT25_INSERT: ++ { ++ //some muticast with source IP is all zero, maybe other case is illegal ++ //in class A, B, C, host address is all zero or all one is illegal ++ if (iph->saddr == 0) ++ return 0; ++ DEBUG_INFO("NAT25: Insert IP, SA=%08x, DA=%08x\n", iph->saddr, iph->daddr); ++ __nat25_generate_ipv4_network_addr(networkAddr, &iph->saddr); ++ //record source IP address and , source mac address into db ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ { ++ DEBUG_INFO("NAT25: Lookup IP, SA=%08x, DA=%08x\n", iph->saddr, iph->daddr); ++#ifdef SUPPORT_TX_MCAST2UNI ++ if (priv->pshare->rf_ft_var.mc2u_disable || ++ ((((OPMODE & (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ++ == (WIFI_STATION_STATE|WIFI_ASOC_STATE)) && ++ !checkIPMcAndReplace(priv, skb, &iph->daddr)) || ++ (OPMODE & WIFI_ADHOC_STATE))) ++#endif ++ { ++ __nat25_generate_ipv4_network_addr(networkAddr, &iph->daddr); ++ ++ if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) { ++ if (*((unsigned char *)&iph->daddr + 3) == 0xff) { ++ // L2 is unicast but L3 is broadcast, make L2 bacome broadcast ++ DEBUG_INFO("NAT25: Set DA as boardcast\n"); ++ memset(skb->data, 0xff, ETH_ALEN); ++ } ++ else { ++ // forward unknow IP packet to upper TCP/IP ++ DEBUG_INFO("NAT25: Replace DA with BR's MAC\n"); ++ if ( (*(u32 *)priv->br_mac) == 0 && (*(u16 *)(priv->br_mac+4)) == 0 ) { ++ void netdev_br_init(struct net_device *netdev); ++ printk("Re-init netdev_br_init() due to br_mac==0!\n"); ++ netdev_br_init(priv->pnetdev); ++ } ++ memcpy(skb->data, priv->br_mac, ETH_ALEN); ++ } ++ } ++ } ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle ARP frame */ ++ /*---------------------------------------------------*/ ++ else if(protocol == __constant_htons(ETH_P_ARP)) ++ { ++ struct arphdr *arp = (struct arphdr *)(skb->data + ETH_HLEN); ++ unsigned char *arp_ptr = (unsigned char *)(arp + 1); ++ unsigned int *sender, *target; ++ ++ if(arp->ar_pro != __constant_htons(ETH_P_IP)) ++ { ++ DEBUG_WARN("NAT25: arp protocol unknown (%4x)!\n", htons(arp->ar_pro)); ++ return -1; ++ } ++ ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return 0; // skb_copy for all ARP frame ++ ++ case NAT25_INSERT: ++ { ++ DEBUG_INFO("NAT25: Insert ARP, MAC=%02x%02x%02x%02x%02x%02x\n", arp_ptr[0], ++ arp_ptr[1], arp_ptr[2], arp_ptr[3], arp_ptr[4], arp_ptr[5]); ++ ++ // change to ARP sender mac address to wlan STA address ++ memcpy(arp_ptr, GET_MY_HWADDR(priv), ETH_ALEN); ++ ++ arp_ptr += arp->ar_hln; ++ sender = (unsigned int *)arp_ptr; ++ ++ __nat25_generate_ipv4_network_addr(networkAddr, sender); ++ ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ { ++ DEBUG_INFO("NAT25: Lookup ARP\n"); ++ ++ arp_ptr += arp->ar_hln; ++ sender = (unsigned int *)arp_ptr; ++ arp_ptr += (arp->ar_hln + arp->ar_pln); ++ target = (unsigned int *)arp_ptr; ++ ++ __nat25_generate_ipv4_network_addr(networkAddr, target); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ ++ // change to ARP target mac address to Lookup result ++ arp_ptr = (unsigned char *)(arp + 1); ++ arp_ptr += (arp->ar_hln + arp->ar_pln); ++ memcpy(arp_ptr, skb->data, ETH_ALEN); ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle IPX and Apple Talk frame */ ++ /*---------------------------------------------------*/ ++ else if((protocol == __constant_htons(ETH_P_IPX)) || ++ (protocol <= __constant_htons(ETH_FRAME_LEN))) ++ { ++ unsigned char ipx_header[2] = {0xFF, 0xFF}; ++ struct ipxhdr *ipx = NULL; ++ struct elapaarp *ea = NULL; ++ struct ddpehdr *ddp = NULL; ++ unsigned char *framePtr = skb->data + ETH_HLEN; ++ ++ if(protocol == __constant_htons(ETH_P_IPX)) ++ { ++ DEBUG_INFO("NAT25: Protocol=IPX (Ethernet II)\n"); ++ ipx = (struct ipxhdr *)framePtr; ++ } ++ else if(protocol <= __constant_htons(ETH_FRAME_LEN)) ++ { ++ if(!memcmp(ipx_header, framePtr, 2)) ++ { ++ DEBUG_INFO("NAT25: Protocol=IPX (Ethernet 802.3)\n"); ++ ipx = (struct ipxhdr *)framePtr; ++ } ++ else ++ { ++ unsigned char ipx_8022_type = 0xE0; ++ unsigned char snap_8022_type = 0xAA; ++ ++ if(*framePtr == snap_8022_type) ++ { ++ unsigned char ipx_snap_id[5] = {0x0, 0x0, 0x0, 0x81, 0x37}; // IPX SNAP ID ++ unsigned char aarp_snap_id[5] = {0x00, 0x00, 0x00, 0x80, 0xF3}; // Apple Talk AARP SNAP ID ++ unsigned char ddp_snap_id[5] = {0x08, 0x00, 0x07, 0x80, 0x9B}; // Apple Talk DDP SNAP ID ++ ++ framePtr += 3; // eliminate the 802.2 header ++ ++ if(!memcmp(ipx_snap_id, framePtr, 5)) ++ { ++ framePtr += 5; // eliminate the SNAP header ++ ++ DEBUG_INFO("NAT25: Protocol=IPX (Ethernet SNAP)\n"); ++ ipx = (struct ipxhdr *)framePtr; ++ } ++ else if(!memcmp(aarp_snap_id, framePtr, 5)) ++ { ++ framePtr += 5; // eliminate the SNAP header ++ ++ ea = (struct elapaarp *)framePtr; ++ } ++ else if(!memcmp(ddp_snap_id, framePtr, 5)) ++ { ++ framePtr += 5; // eliminate the SNAP header ++ ++ ddp = (struct ddpehdr *)framePtr; ++ } ++ else ++ { ++ DEBUG_WARN("NAT25: Protocol=Ethernet SNAP %02x%02x%02x%02x%02x\n", framePtr[0], ++ framePtr[1], framePtr[2], framePtr[3], framePtr[4]); ++ return -1; ++ } ++ } ++ else if(*framePtr == ipx_8022_type) ++ { ++ framePtr += 3; // eliminate the 802.2 header ++ ++ if(!memcmp(ipx_header, framePtr, 2)) ++ { ++ DEBUG_INFO("NAT25: Protocol=IPX (Ethernet 802.2)\n"); ++ ipx = (struct ipxhdr *)framePtr; ++ } ++ else ++ return -1; ++ } ++ else ++ return -1; ++ } ++ } ++ else ++ return -1; ++ ++ /* IPX */ ++ if(ipx != NULL) ++ { ++ switch(method) ++ { ++ case NAT25_CHECK: ++ if(!memcmp(skb->data+ETH_ALEN, ipx->ipx_source.node, ETH_ALEN)) ++ { ++ DEBUG_INFO("NAT25: Check IPX skb_copy\n"); ++ return 0; ++ } ++ return -1; ++ ++ case NAT25_INSERT: ++ { ++ DEBUG_INFO("NAT25: Insert IPX, Dest=%08x,%02x%02x%02x%02x%02x%02x,%04x Source=%08x,%02x%02x%02x%02x%02x%02x,%04x\n", ++ ipx->ipx_dest.net, ++ ipx->ipx_dest.node[0], ++ ipx->ipx_dest.node[1], ++ ipx->ipx_dest.node[2], ++ ipx->ipx_dest.node[3], ++ ipx->ipx_dest.node[4], ++ ipx->ipx_dest.node[5], ++ ipx->ipx_dest.sock, ++ ipx->ipx_source.net, ++ ipx->ipx_source.node[0], ++ ipx->ipx_source.node[1], ++ ipx->ipx_source.node[2], ++ ipx->ipx_source.node[3], ++ ipx->ipx_source.node[4], ++ ipx->ipx_source.node[5], ++ ipx->ipx_source.sock); ++ ++ if(!memcmp(skb->data+ETH_ALEN, ipx->ipx_source.node, ETH_ALEN)) ++ { ++ DEBUG_INFO("NAT25: Use IPX Net, and Socket as network addr\n"); ++ ++ __nat25_generate_ipx_network_addr_with_socket(networkAddr, &ipx->ipx_source.net, &ipx->ipx_source.sock); ++ ++ // change IPX source node addr to wlan STA address ++ memcpy(ipx->ipx_source.node, GET_MY_HWADDR(priv), ETH_ALEN); ++ } ++ else ++ { ++ __nat25_generate_ipx_network_addr_with_node(networkAddr, &ipx->ipx_source.net, ipx->ipx_source.node); ++ } ++ ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ { ++ if(!memcmp(GET_MY_HWADDR(priv), ipx->ipx_dest.node, ETH_ALEN)) ++ { ++ DEBUG_INFO("NAT25: Lookup IPX, Modify Destination IPX Node addr\n"); ++ ++ __nat25_generate_ipx_network_addr_with_socket(networkAddr, &ipx->ipx_dest.net, &ipx->ipx_dest.sock); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ ++ // replace IPX destination node addr with Lookup destination MAC addr ++ memcpy(ipx->ipx_dest.node, skb->data, ETH_ALEN); ++ } ++ else ++ { ++ __nat25_generate_ipx_network_addr_with_node(networkAddr, &ipx->ipx_dest.net, ipx->ipx_dest.node); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ } ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /* AARP */ ++ else if(ea != NULL) ++ { ++ /* Sanity check fields. */ ++ if(ea->hw_len != ETH_ALEN || ea->pa_len != AARP_PA_ALEN) ++ { ++ DEBUG_WARN("NAT25: Appletalk AARP Sanity check fail!\n"); ++ return -1; ++ } ++ ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return 0; ++ ++ case NAT25_INSERT: ++ { ++ // change to AARP source mac address to wlan STA address ++ memcpy(ea->hw_src, GET_MY_HWADDR(priv), ETH_ALEN); ++ ++ DEBUG_INFO("NAT25: Insert AARP, Source=%d,%d Destination=%d,%d\n", ++ ea->pa_src_net, ++ ea->pa_src_node, ++ ea->pa_dst_net, ++ ea->pa_dst_node); ++ ++ __nat25_generate_apple_network_addr(networkAddr, &ea->pa_src_net, &ea->pa_src_node); ++ ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ { ++ DEBUG_INFO("NAT25: Lookup AARP, Source=%d,%d Destination=%d,%d\n", ++ ea->pa_src_net, ++ ea->pa_src_node, ++ ea->pa_dst_net, ++ ea->pa_dst_node); ++ ++ __nat25_generate_apple_network_addr(networkAddr, &ea->pa_dst_net, &ea->pa_dst_node); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ ++ // change to AARP destination mac address to Lookup result ++ memcpy(ea->hw_dst, skb->data, ETH_ALEN); ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /* DDP */ ++ else if(ddp != NULL) ++ { ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return -1; ++ ++ case NAT25_INSERT: ++ { ++ DEBUG_INFO("NAT25: Insert DDP, Source=%d,%d Destination=%d,%d\n", ++ ddp->deh_snet, ++ ddp->deh_snode, ++ ddp->deh_dnet, ++ ddp->deh_dnode); ++ ++ __nat25_generate_apple_network_addr(networkAddr, &ddp->deh_snet, &ddp->deh_snode); ++ ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ { ++ DEBUG_INFO("NAT25: Lookup DDP, Source=%d,%d Destination=%d,%d\n", ++ ddp->deh_snet, ++ ddp->deh_snode, ++ ddp->deh_dnet, ++ ddp->deh_dnode); ++ ++ __nat25_generate_apple_network_addr(networkAddr, &ddp->deh_dnet, &ddp->deh_dnode); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ return -1; ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle PPPoE frame */ ++ /*---------------------------------------------------*/ ++ else if((protocol == __constant_htons(ETH_P_PPP_DISC)) || ++ (protocol == __constant_htons(ETH_P_PPP_SES))) ++ { ++ struct pppoe_hdr *ph = (struct pppoe_hdr *)(skb->data + ETH_HLEN); ++ unsigned short *pMagic; ++ ++ switch(method) ++ { ++ case NAT25_CHECK: ++ if (ph->sid == 0) ++ return 0; ++ return 1; ++ ++ case NAT25_INSERT: ++ if(ph->sid == 0) // Discovery phase according to tag ++ { ++ if(ph->code == PADI_CODE || ph->code == PADR_CODE) ++ { ++ if (priv->ethBrExtInfo.addPPPoETag) { ++ struct pppoe_tag *tag, *pOldTag; ++ unsigned char tag_buf[40]; ++ int old_tag_len=0; ++ ++ tag = (struct pppoe_tag *)tag_buf; ++ pOldTag = (struct pppoe_tag *)__nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID)); ++ if (pOldTag) { // if SID existed, copy old value and delete it ++ old_tag_len = ntohs(pOldTag->tag_len); ++ if (old_tag_len+TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN > sizeof(tag_buf)) { ++ DEBUG_ERR("SID tag length too long!\n"); ++ return -1; ++ } ++ ++ memcpy(tag->tag_data+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN, ++ pOldTag->tag_data, old_tag_len); ++ ++ if (skb_pull_and_merge(skb, (unsigned char *)pOldTag, TAG_HDR_LEN+old_tag_len) < 0) { ++ DEBUG_ERR("call skb_pull_and_merge() failed in PADI/R packet!\n"); ++ return -1; ++ } ++ ph->length = htons(ntohs(ph->length)-TAG_HDR_LEN-old_tag_len); ++ } ++ ++ tag->tag_type = PTT_RELAY_SID; ++ tag->tag_len = htons(MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN+old_tag_len); ++ ++ // insert the magic_code+client mac in relay tag ++ pMagic = (unsigned short *)tag->tag_data; ++ *pMagic = htons(MAGIC_CODE); ++ memcpy(tag->tag_data+MAGIC_CODE_LEN, skb->data+ETH_ALEN, ETH_ALEN); ++ ++ //Add relay tag ++ if(__nat25_add_pppoe_tag(skb, tag) < 0) ++ return -1; ++ ++ DEBUG_INFO("NAT25: Insert PPPoE, forward %s packet\n", ++ (ph->code == PADI_CODE ? "PADI" : "PADR")); ++ } ++ else { // not add relay tag ++ if (priv->pppoe_connection_in_progress && ++ memcmp(skb->data+ETH_ALEN, priv->pppoe_addr, ETH_ALEN)) { ++ DEBUG_ERR("Discard PPPoE packet due to another PPPoE connection is in progress!\n"); ++ return -2; ++ } ++ ++ if (priv->pppoe_connection_in_progress == 0) ++ memcpy(priv->pppoe_addr, skb->data+ETH_ALEN, ETH_ALEN); ++ ++ priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE; ++ } ++ } ++ else ++ return -1; ++ } ++ else // session phase ++ { ++ DEBUG_INFO("NAT25: Insert PPPoE, insert session packet to %s\n", skb->dev->name); ++ ++ __nat25_generate_pppoe_network_addr(networkAddr, skb->data, &(ph->sid)); ++ ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ ++ __nat25_db_print(priv); ++ ++ if (!priv->ethBrExtInfo.addPPPoETag && ++ priv->pppoe_connection_in_progress && ++ !memcmp(skb->data+ETH_ALEN, priv->pppoe_addr, ETH_ALEN)) ++ priv->pppoe_connection_in_progress = 0; ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ if(ph->code == PADO_CODE || ph->code == PADS_CODE) ++ { ++ if (priv->ethBrExtInfo.addPPPoETag) { ++ struct pppoe_tag *tag; ++ unsigned char *ptr; ++ unsigned short tagType, tagLen; ++ int offset=0; ++ ++ if((ptr = __nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID))) == 0) { ++ DEBUG_ERR("Fail to find PTT_RELAY_SID in FADO!\n"); ++ return -1; ++ } ++ ++ tag = (struct pppoe_tag *)ptr; ++ tagType = (unsigned short)((ptr[0] << 8) + ptr[1]); ++ tagLen = (unsigned short)((ptr[2] << 8) + ptr[3]); ++ ++ if((tagType != ntohs(PTT_RELAY_SID)) || (tagLen < (MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN))) { ++ DEBUG_ERR("Invalid PTT_RELAY_SID tag length [%d]!\n", tagLen); ++ return -1; ++ } ++ ++ pMagic = (unsigned short *)tag->tag_data; ++ if (ntohs(*pMagic) != MAGIC_CODE) { ++ DEBUG_ERR("Can't find MAGIC_CODE in %s packet!\n", ++ (ph->code == PADO_CODE ? "PADO" : "PADS")); ++ return -1; ++ } ++ ++ memcpy(skb->data, tag->tag_data+MAGIC_CODE_LEN, ETH_ALEN); ++ ++ if (tagLen > MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN) ++ offset = TAG_HDR_LEN; ++ ++ if (skb_pull_and_merge(skb, ptr+offset, TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset) < 0) { ++ DEBUG_ERR("call skb_pull_and_merge() failed in PADO packet!\n"); ++ return -1; ++ } ++ ph->length = htons(ntohs(ph->length)-(TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset)); ++ if (offset > 0) ++ tag->tag_len = htons(tagLen-MAGIC_CODE_LEN-RTL_RELAY_TAG_LEN); ++ ++ DEBUG_INFO("NAT25: Lookup PPPoE, forward %s Packet from %s\n", ++ (ph->code == PADO_CODE ? "PADO" : "PADS"), skb->dev->name); ++ } ++ else { // not add relay tag ++ if (!priv->pppoe_connection_in_progress) { ++ DEBUG_ERR("Discard PPPoE packet due to no connection in progresss!\n"); ++ return -1; ++ } ++ memcpy(skb->data, priv->pppoe_addr, ETH_ALEN); ++ priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE; ++ } ++ } ++ else { ++ if(ph->sid != 0) ++ { ++ DEBUG_INFO("NAT25: Lookup PPPoE, lookup session packet from %s\n", skb->dev->name); ++ __nat25_generate_pppoe_network_addr(networkAddr, skb->data+ETH_ALEN, &(ph->sid)); ++ ++ __nat25_db_network_lookup_and_replace(priv, skb, networkAddr); ++ ++ __nat25_db_print(priv); ++ } ++ else ++ return -1; ++ ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle EAP frame */ ++ /*---------------------------------------------------*/ ++ else if(protocol == __constant_htons(0x888e)) ++ { ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return -1; ++ ++ case NAT25_INSERT: ++ return 0; ++ ++ case NAT25_LOOKUP: ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle C-Media proprietary frame */ ++ /*---------------------------------------------------*/ ++ else if((protocol == __constant_htons(0xe2ae)) || ++ (protocol == __constant_htons(0xe2af))) ++ { ++ switch(method) ++ { ++ case NAT25_CHECK: ++ return -1; ++ ++ case NAT25_INSERT: ++ return 0; ++ ++ case NAT25_LOOKUP: ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++ ++ /*---------------------------------------------------*/ ++ /* Handle IPV6 frame */ ++ /*---------------------------------------------------*/ ++#ifdef CL_IPV6_PASS ++ else if(protocol == __constant_htons(ETH_P_IPV6)) ++ { ++ struct ipv6hdr *iph = (struct ipv6hdr *)(skb->data + ETH_HLEN); ++ ++ if (sizeof(*iph) >= (skb->len - ETH_HLEN)) ++ { ++ DEBUG_WARN("NAT25: malformed IPv6 packet !\n"); ++ return -1; ++ } ++ ++ switch(method) ++ { ++ case NAT25_CHECK: ++ if (skb->data[0] & 1) ++ return 0; ++ return -1; ++ ++ case NAT25_INSERT: ++ { ++ DEBUG_INFO("NAT25: Insert IP, SA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x," ++ " DA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n", ++ iph->saddr.s6_addr16[0],iph->saddr.s6_addr16[1],iph->saddr.s6_addr16[2],iph->saddr.s6_addr16[3], ++ iph->saddr.s6_addr16[4],iph->saddr.s6_addr16[5],iph->saddr.s6_addr16[6],iph->saddr.s6_addr16[7], ++ iph->daddr.s6_addr16[0],iph->daddr.s6_addr16[1],iph->daddr.s6_addr16[2],iph->daddr.s6_addr16[3], ++ iph->daddr.s6_addr16[4],iph->daddr.s6_addr16[5],iph->daddr.s6_addr16[6],iph->daddr.s6_addr16[7]); ++ ++ if (memcmp(&iph->saddr, "\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0", 16)) { ++ __nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->saddr); ++ __nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr); ++ __nat25_db_print(priv); ++ ++ if (iph->nexthdr == IPPROTO_ICMPV6 && ++ skb->len > (ETH_HLEN + sizeof(*iph) + 4)) { ++ if (update_nd_link_layer_addr(skb->data + ETH_HLEN + sizeof(*iph), ++ skb->len - ETH_HLEN - sizeof(*iph), GET_MY_HWADDR(priv))) { ++ struct icmp6hdr *hdr = (struct icmp6hdr *)(skb->data + ETH_HLEN + sizeof(*iph)); ++ hdr->icmp6_cksum = 0; ++ hdr->icmp6_cksum = csum_ipv6_magic(&iph->saddr, &iph->daddr, ++ iph->payload_len, ++ IPPROTO_ICMPV6, ++ csum_partial((__u8 *)hdr, iph->payload_len, 0)); ++ } ++ } ++ } ++ } ++ return 0; ++ ++ case NAT25_LOOKUP: ++ DEBUG_INFO("NAT25: Lookup IP, SA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x," ++ " DA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n", ++ iph->saddr.s6_addr16[0],iph->saddr.s6_addr16[1],iph->saddr.s6_addr16[2],iph->saddr.s6_addr16[3], ++ iph->saddr.s6_addr16[4],iph->saddr.s6_addr16[5],iph->saddr.s6_addr16[6],iph->saddr.s6_addr16[7], ++ iph->daddr.s6_addr16[0],iph->daddr.s6_addr16[1],iph->daddr.s6_addr16[2],iph->daddr.s6_addr16[3], ++ iph->daddr.s6_addr16[4],iph->daddr.s6_addr16[5],iph->daddr.s6_addr16[6],iph->daddr.s6_addr16[7]); ++ ++ ++ __nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->daddr); ++ if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) { ++#ifdef SUPPORT_RX_UNI2MCAST ++ if (iph->daddr.s6_addr[0] == 0xff) ++ convert_ipv6_mac_to_mc(skb); ++#endif ++ } ++ return 0; ++ ++ default: ++ return -1; ++ } ++ } ++#endif // CL_IPV6_PASS ++ ++ return -1; ++} ++ ++ ++int nat25_handle_frame(_adapter *priv, struct sk_buff *skb) ++{ ++#ifdef BR_EXT_DEBUG ++ if((!priv->ethBrExtInfo.nat25_disable) && (!(skb->data[0] & 1))) ++ { ++ panic_printk("NAT25: Input Frame: DA=%02x%02x%02x%02x%02x%02x SA=%02x%02x%02x%02x%02x%02x\n", ++ skb->data[0], ++ skb->data[1], ++ skb->data[2], ++ skb->data[3], ++ skb->data[4], ++ skb->data[5], ++ skb->data[6], ++ skb->data[7], ++ skb->data[8], ++ skb->data[9], ++ skb->data[10], ++ skb->data[11]); ++ } ++#endif ++ ++ if(!(skb->data[0] & 1)) ++ { ++ int is_vlan_tag=0, i, retval=0; ++ unsigned short vlan_hdr=0; ++ ++ if (*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_8021Q)) { ++ is_vlan_tag = 1; ++ vlan_hdr = *((unsigned short *)(skb->data+ETH_ALEN*2+2)); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+ETH_ALEN*2+2-i*2)) = *((unsigned short *)(skb->data+ETH_ALEN*2-2-i*2)); ++ skb_pull(skb, 4); ++ } ++ ++ if (!priv->ethBrExtInfo.nat25_disable) ++ { ++ _irqL irqL; ++ _enter_critical_bh(&priv->br_ext_lock, &irqL); ++ /* ++ * This function look up the destination network address from ++ * the NAT2.5 database. Return value = -1 means that the ++ * corresponding network protocol is NOT support. ++ */ ++ if (!priv->ethBrExtInfo.nat25sc_disable && ++ (*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_IP)) && ++ !memcmp(priv->scdb_ip, skb->data+ETH_HLEN+16, 4)) { ++ memcpy(skb->data, priv->scdb_mac, ETH_ALEN); ++ ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ } ++ else { ++ _exit_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ retval = nat25_db_handle(priv, skb, NAT25_LOOKUP); ++ } ++ } ++ else { ++ if (((*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_IP)) && ++ !memcmp(priv->br_ip, skb->data+ETH_HLEN+16, 4)) || ++ ((*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_ARP)) && ++ !memcmp(priv->br_ip, skb->data+ETH_HLEN+24, 4))) { ++ // for traffic to upper TCP/IP ++ retval = nat25_db_handle(priv, skb, NAT25_LOOKUP); ++ } ++ } ++ ++ if (is_vlan_tag) { ++ skb_push(skb, 4); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2)); ++ *((unsigned short *)(skb->data+ETH_ALEN*2)) = __constant_htons(ETH_P_8021Q); ++ *((unsigned short *)(skb->data+ETH_ALEN*2+2)) = vlan_hdr; ++ } ++ ++ if(retval == -1) { ++ //DEBUG_ERR("NAT25: Lookup fail!\n"); ++ return -1; ++ } ++ } ++ ++ return 0; ++} ++ ++#if 0 ++void mac_clone(_adapter *priv, unsigned char *addr) ++{ ++ struct sockaddr sa; ++ ++ memcpy(sa.sa_data, addr, ETH_ALEN); ++ DEBUG_INFO("MAC Clone: Addr=%02x%02x%02x%02x%02x%02x\n", ++ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); ++ rtl8192cd_set_hwaddr(priv->dev, &sa); ++} ++ ++ ++int mac_clone_handle_frame(_adapter *priv, struct sk_buff *skb) ++{ ++ if(priv->ethBrExtInfo.macclone_enable && !priv->macclone_completed) ++ { ++ if(!(skb->data[ETH_ALEN] & 1)) //// check any other particular MAC add ++ { ++ if(memcmp(skb->data+ETH_ALEN, GET_MY_HWADDR(priv), ETH_ALEN) && ++ ((priv->dev->br_port) && ++ memcmp(skb->data+ETH_ALEN, priv->br_mac, ETH_ALEN))) ++ { ++ mac_clone(priv, skb->data+ETH_ALEN); ++ priv->macclone_completed = 1; ++ } ++ } ++ } ++ ++ return 0; ++} ++#endif // 0 ++ ++#define SERVER_PORT 67 ++#define CLIENT_PORT 68 ++#define DHCP_MAGIC 0x63825363 ++#define BROADCAST_FLAG 0x8000 ++ ++struct dhcpMessage { ++ u_int8_t op; ++ u_int8_t htype; ++ u_int8_t hlen; ++ u_int8_t hops; ++ u_int32_t xid; ++ u_int16_t secs; ++ u_int16_t flags; ++ u_int32_t ciaddr; ++ u_int32_t yiaddr; ++ u_int32_t siaddr; ++ u_int32_t giaddr; ++ u_int8_t chaddr[16]; ++ u_int8_t sname[64]; ++ u_int8_t file[128]; ++ u_int32_t cookie; ++ u_int8_t options[308]; /* 312 - cookie */ ++}; ++ ++void dhcp_flag_bcast(_adapter *priv, struct sk_buff *skb) ++{ ++ if(skb == NULL) ++ return; ++ ++ if(!priv->ethBrExtInfo.dhcp_bcst_disable) ++ { ++ unsigned short protocol = *((unsigned short *)(skb->data + 2 * ETH_ALEN)); ++ ++ if(protocol == __constant_htons(ETH_P_IP)) // IP ++ { ++ struct iphdr* iph = (struct iphdr *)(skb->data + ETH_HLEN); ++ ++ if(iph->protocol == IPPROTO_UDP) // UDP ++ { ++ struct udphdr *udph = (struct udphdr *)((SIZE_PTR)iph + (iph->ihl << 2)); ++ ++ if((udph->source == __constant_htons(CLIENT_PORT)) ++ && (udph->dest == __constant_htons(SERVER_PORT))) // DHCP request ++ { ++ struct dhcpMessage *dhcph = ++ (struct dhcpMessage *)((SIZE_PTR)udph + sizeof(struct udphdr)); ++ ++ if(dhcph->cookie == __constant_htonl(DHCP_MAGIC)) // match magic word ++ { ++ if(!(dhcph->flags & htons(BROADCAST_FLAG))) // if not broadcast ++ { ++ register int sum = 0; ++ ++ DEBUG_INFO("DHCP: change flag of DHCP request to broadcast.\n"); ++ // or BROADCAST flag ++ dhcph->flags |= htons(BROADCAST_FLAG); ++ // recalculate checksum ++ sum = ~(udph->check) & 0xffff; ++ sum += dhcph->flags; ++ while(sum >> 16) ++ sum = (sum & 0xffff) + (sum >> 16); ++ udph->check = ~sum; ++ } ++ } ++ } ++ } ++ } ++ } ++} ++ ++ ++void *scdb_findEntry(_adapter *priv, unsigned char *macAddr, ++ unsigned char *ipAddr) ++{ ++ unsigned char networkAddr[MAX_NETWORK_ADDR_LEN]; ++ struct nat25_network_db_entry *db; ++ int hash; ++ //_irqL irqL; ++ //_enter_critical_bh(&priv->br_ext_lock, &irqL); ++ ++ __nat25_generate_ipv4_network_addr(networkAddr, (unsigned int *)ipAddr); ++ hash = __nat25_network_hash(networkAddr); ++ db = priv->nethash[hash]; ++ while (db != NULL) ++ { ++ if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) { ++ //_exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return (void *)db; ++ } ++ ++ db = db->next_hash; ++ } ++ ++ //_exit_critical_bh(&priv->br_ext_lock, &irqL); ++ return NULL; ++} ++ ++#endif // CONFIG_BR_EXT +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_cmd.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_cmd.c +new file mode 100644 +index 000000000000..2455304514c8 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_cmd.c +@@ -0,0 +1,3034 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_CMD_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#ifdef CONFIG_BR_EXT ++#include ++#endif //CONFIG_BR_EXT ++/* ++Caller and the rtw_cmd_thread can protect cmd_q by spin_lock. ++No irqsave is necessary. ++*/ ++ ++sint _rtw_init_cmd_priv (struct cmd_priv *pcmdpriv) ++{ ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++ _rtw_init_sema(&(pcmdpriv->cmd_queue_sema), 0); ++ //_rtw_init_sema(&(pcmdpriv->cmd_done_sema), 0); ++ _rtw_init_sema(&(pcmdpriv->terminate_cmdthread_sema), 0); ++ ++ ++ _rtw_init_queue(&(pcmdpriv->cmd_queue)); ++ ++ //allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf ++ ++ pcmdpriv->cmd_seq = 1; ++ ++ pcmdpriv->cmd_allocated_buf = rtw_zmalloc(MAX_CMDSZ + CMDBUFF_ALIGN_SZ); ++ ++ if (pcmdpriv->cmd_allocated_buf == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pcmdpriv->cmd_buf = pcmdpriv->cmd_allocated_buf + CMDBUFF_ALIGN_SZ - ( (SIZE_PTR)(pcmdpriv->cmd_allocated_buf) & (CMDBUFF_ALIGN_SZ-1)); ++ ++ pcmdpriv->rsp_allocated_buf = rtw_zmalloc(MAX_RSPSZ + 4); ++ ++ if (pcmdpriv->rsp_allocated_buf == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pcmdpriv->rsp_buf = pcmdpriv->rsp_allocated_buf + 4 - ( (SIZE_PTR)(pcmdpriv->rsp_allocated_buf) & 3); ++ ++ pcmdpriv->cmd_issued_cnt = pcmdpriv->cmd_done_cnt = pcmdpriv->rsp_cnt = 0; ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++#ifdef CONFIG_C2H_WK ++static void c2h_wk_callback(_workitem *work); ++#endif ++sint _rtw_init_evt_priv(struct evt_priv *pevtpriv) ++{ ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++#ifdef CONFIG_H2CLBK ++ _rtw_init_sema(&(pevtpriv->lbkevt_done), 0); ++ pevtpriv->lbkevt_limit = 0; ++ pevtpriv->lbkevt_num = 0; ++ pevtpriv->cmdevt_parm = NULL; ++#endif ++ ++ //allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf ++ ATOMIC_SET(&pevtpriv->event_seq, 0); ++ pevtpriv->evt_done_cnt = 0; ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++ ++ _rtw_init_sema(&(pevtpriv->evt_notify), 0); ++ _rtw_init_sema(&(pevtpriv->terminate_evtthread_sema), 0); ++ ++ pevtpriv->evt_allocated_buf = rtw_zmalloc(MAX_EVTSZ + 4); ++ if (pevtpriv->evt_allocated_buf == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ pevtpriv->evt_buf = pevtpriv->evt_allocated_buf + 4 - ((unsigned int)(pevtpriv->evt_allocated_buf) & 3); ++ ++ ++#ifdef CONFIG_SDIO_HCI ++ pevtpriv->allocated_c2h_mem = rtw_zmalloc(C2H_MEM_SZ +4); ++ ++ if (pevtpriv->allocated_c2h_mem == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pevtpriv->c2h_mem = pevtpriv->allocated_c2h_mem + 4\ ++ - ( (u32)(pevtpriv->allocated_c2h_mem) & 3); ++#ifdef PLATFORM_OS_XP ++ pevtpriv->pc2h_mdl= IoAllocateMdl((u8 *)pevtpriv->c2h_mem, C2H_MEM_SZ , FALSE, FALSE, NULL); ++ ++ if(pevtpriv->pc2h_mdl == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ MmBuildMdlForNonPagedPool(pevtpriv->pc2h_mdl); ++#endif ++#endif //end of CONFIG_SDIO_HCI ++ ++ _rtw_init_queue(&(pevtpriv->evt_queue)); ++ ++exit: ++ ++#endif //end of CONFIG_EVENT_THREAD_MODE ++ ++#ifdef CONFIG_C2H_WK ++ _init_workitem(&pevtpriv->c2h_wk, c2h_wk_callback, NULL); ++ pevtpriv->c2h_wk_alive = _FALSE; ++ pevtpriv->c2h_queue = rtw_cbuf_alloc(C2H_QUEUE_MAX_LEN+1); ++#endif ++ ++_func_exit_; ++ ++ return res; ++} ++ ++void _rtw_free_evt_priv (struct evt_priv *pevtpriv) ++{ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("+_rtw_free_evt_priv \n")); ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++ _rtw_free_sema(&(pevtpriv->evt_notify)); ++ _rtw_free_sema(&(pevtpriv->terminate_evtthread_sema)); ++ ++ ++ if (pevtpriv->evt_allocated_buf) ++ rtw_mfree(pevtpriv->evt_allocated_buf, MAX_EVTSZ + 4); ++#endif ++ ++#ifdef CONFIG_C2H_WK ++ _cancel_workitem_sync(&pevtpriv->c2h_wk); ++ while(pevtpriv->c2h_wk_alive) ++ rtw_msleep_os(10); ++ ++ while (!rtw_cbuf_empty(pevtpriv->c2h_queue)) { ++ void *c2h; ++ if ((c2h = rtw_cbuf_pop(pevtpriv->c2h_queue)) != NULL ++ && c2h != (void *)pevtpriv) { ++ rtw_mfree(c2h, 16); ++ } ++ } ++ rtw_cbuf_free(pevtpriv->c2h_queue); ++#endif ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("-_rtw_free_evt_priv \n")); ++ ++_func_exit_; ++ ++} ++ ++void _rtw_free_cmd_priv (struct cmd_priv *pcmdpriv) ++{ ++_func_enter_; ++ ++ if(pcmdpriv){ ++ _rtw_spinlock_free(&(pcmdpriv->cmd_queue.lock)); ++ _rtw_free_sema(&(pcmdpriv->cmd_queue_sema)); ++ //_rtw_free_sema(&(pcmdpriv->cmd_done_sema)); ++ _rtw_free_sema(&(pcmdpriv->terminate_cmdthread_sema)); ++ ++ if (pcmdpriv->cmd_allocated_buf) ++ rtw_mfree(pcmdpriv->cmd_allocated_buf, MAX_CMDSZ + CMDBUFF_ALIGN_SZ); ++ ++ if (pcmdpriv->rsp_allocated_buf) ++ rtw_mfree(pcmdpriv->rsp_allocated_buf, MAX_RSPSZ + 4); ++ } ++_func_exit_; ++} ++ ++/* ++Calling Context: ++ ++rtw_enqueue_cmd can only be called between kernel thread, ++since only spin_lock is used. ++ ++ISR/Call-Back functions can't call this sub-function. ++ ++*/ ++ ++sint _rtw_enqueue_cmd(_queue *queue, struct cmd_obj *obj) ++{ ++ _irqL irqL; ++ ++_func_enter_; ++ ++ if (obj == NULL) ++ goto exit; ++ ++ //_enter_critical_bh(&queue->lock, &irqL); ++ _enter_critical(&queue->lock, &irqL); ++ ++ rtw_list_insert_tail(&obj->list, &queue->queue); ++ ++ //_exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical(&queue->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++struct cmd_obj *_rtw_dequeue_cmd(_queue *queue) ++{ ++ _irqL irqL; ++ struct cmd_obj *obj; ++ ++_func_enter_; ++ ++ //_enter_critical_bh(&(queue->lock), &irqL); ++ _enter_critical(&queue->lock, &irqL); ++ if (rtw_is_list_empty(&(queue->queue))) ++ obj = NULL; ++ else ++ { ++ obj = LIST_CONTAINOR(get_next(&(queue->queue)), struct cmd_obj, list); ++ rtw_list_delete(&obj->list); ++ } ++ ++ //_exit_critical_bh(&(queue->lock), &irqL); ++ _exit_critical(&queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return obj; ++} ++ ++u32 rtw_init_cmd_priv(struct cmd_priv *pcmdpriv) ++{ ++ u32 res; ++_func_enter_; ++ res = _rtw_init_cmd_priv (pcmdpriv); ++_func_exit_; ++ return res; ++} ++ ++u32 rtw_init_evt_priv (struct evt_priv *pevtpriv) ++{ ++ int res; ++_func_enter_; ++ res = _rtw_init_evt_priv(pevtpriv); ++_func_exit_; ++ return res; ++} ++ ++void rtw_free_evt_priv (struct evt_priv *pevtpriv) ++{ ++_func_enter_; ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("rtw_free_evt_priv\n")); ++ _rtw_free_evt_priv(pevtpriv); ++_func_exit_; ++} ++ ++void rtw_free_cmd_priv (struct cmd_priv *pcmdpriv) ++{ ++_func_enter_; ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("rtw_free_cmd_priv\n")); ++ _rtw_free_cmd_priv(pcmdpriv); ++_func_exit_; ++} ++ ++int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj); ++int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj) ++{ ++ u8 bAllow = _FALSE; //set to _TRUE to allow enqueuing cmd when hw_init_completed is _FALSE ++ ++ #ifdef SUPPORT_HW_RFOFF_DETECTED ++ //To decide allow or not ++ if( (pcmdpriv->padapter->pwrctrlpriv.bHWPwrPindetect) ++ &&(!pcmdpriv->padapter->registrypriv.usbss_enable) ++ ) ++ { ++ if(cmd_obj->cmdcode == GEN_CMD_CODE(_Set_Drv_Extra) ) ++ { ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm = (struct drvextra_cmd_parm *)cmd_obj->parmbuf; ++ if(pdrvextra_cmd_parm->ec_id == POWER_SAVING_CTRL_WK_CID) ++ { ++ //DBG_871X("==>enqueue POWER_SAVING_CTRL_WK_CID\n"); ++ bAllow = _TRUE; ++ } ++ } ++ } ++ #endif ++ ++ if(cmd_obj->cmdcode == GEN_CMD_CODE(_SetChannelPlan)) ++ bAllow = _TRUE; ++ ++ if( (pcmdpriv->padapter->hw_init_completed ==_FALSE && bAllow == _FALSE) ++ || pcmdpriv->cmdthd_running== _FALSE //com_thread not running ++ ) ++ { ++ //DBG_871X("%s:%s: drop cmdcode:%u, hw_init_completed:%u, cmdthd_running:%u\n", caller_func, __FUNCTION__, ++ // cmd_obj->cmdcode, ++ // pcmdpriv->padapter->hw_init_completed, ++ // pcmdpriv->cmdthd_running ++ //); ++ ++ return _FAIL; ++ } ++ return _SUCCESS; ++} ++ ++ ++ ++u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj) ++{ ++ int res = _FAIL; ++ PADAPTER padapter = pcmdpriv->padapter; ++ ++_func_enter_; ++ ++ if (cmd_obj == NULL) { ++ goto exit; ++ } ++ ++ cmd_obj->padapter = padapter; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ //change pcmdpriv to primary's pcmdpriv ++ if (padapter->adapter_type != PRIMARY_ADAPTER && padapter->pbuddy_adapter) ++ pcmdpriv = &(padapter->pbuddy_adapter->cmdpriv); ++#endif ++ ++ if( _FAIL == (res=rtw_cmd_filter(pcmdpriv, cmd_obj)) ) { ++ rtw_free_cmd_obj(cmd_obj); ++ goto exit; ++ } ++ ++ res = _rtw_enqueue_cmd(&pcmdpriv->cmd_queue, cmd_obj); ++ ++ if(res == _SUCCESS) ++ _rtw_up_sema(&pcmdpriv->cmd_queue_sema); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv) ++{ ++ struct cmd_obj *cmd_obj; ++ ++_func_enter_; ++ ++ cmd_obj = _rtw_dequeue_cmd(&pcmdpriv->cmd_queue); ++ ++_func_exit_; ++ return cmd_obj; ++} ++ ++void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv) ++{ ++_func_enter_; ++ pcmdpriv->cmd_done_cnt++; ++ //_rtw_up_sema(&(pcmdpriv->cmd_done_sema)); ++_func_exit_; ++} ++ ++void rtw_free_cmd_obj(struct cmd_obj *pcmd) ++{ ++_func_enter_; ++ ++ if((pcmd->cmdcode!=_JoinBss_CMD_) &&(pcmd->cmdcode!= _CreateBss_CMD_)) ++ { ++ //free parmbuf in cmd_obj ++ rtw_mfree((unsigned char*)pcmd->parmbuf, pcmd->cmdsz); ++ } ++ ++ if(pcmd->rsp!=NULL) ++ { ++ if(pcmd->rspsz!= 0) ++ { ++ //free rsp in cmd_obj ++ rtw_mfree((unsigned char*)pcmd->rsp, pcmd->rspsz); ++ } ++ } ++ ++ //free cmd_obj ++ rtw_mfree((unsigned char*)pcmd, sizeof(struct cmd_obj)); ++ ++_func_exit_; ++} ++ ++void rtw_stop_cmd_thread(_adapter *adapter) ++{ ++ if(adapter->cmdThread && adapter->cmdpriv.cmdthd_running == _TRUE ++ && adapter->cmdpriv.stop_req == 0) ++ { ++ adapter->cmdpriv.stop_req = 1; ++ _rtw_up_sema(&adapter->cmdpriv.cmd_queue_sema); ++ _rtw_down_sema(&adapter->cmdpriv.terminate_cmdthread_sema); ++ } ++} ++ ++thread_return rtw_cmd_thread(thread_context context) ++{ ++ u8 ret; ++ struct cmd_obj *pcmd; ++ u8 *pcmdbuf, *prspbuf; ++ u8 (*cmd_hdl)(_adapter *padapter, u8* pbuf); ++ void (*pcmd_callback)(_adapter *dev, struct cmd_obj *pcmd); ++ _adapter *padapter = (_adapter *)context; ++ struct cmd_priv *pcmdpriv = &(padapter->cmdpriv); ++ ++_func_enter_; ++ ++ thread_enter("RTW_CMD_THREAD"); ++ ++ pcmdbuf = pcmdpriv->cmd_buf; ++ prspbuf = pcmdpriv->rsp_buf; ++ ++ pcmdpriv->stop_req = 0; ++ pcmdpriv->cmdthd_running=_TRUE; ++ _rtw_up_sema(&pcmdpriv->terminate_cmdthread_sema); ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("start r871x rtw_cmd_thread !!!!\n")); ++ ++ while(1) ++ { ++ if ((_rtw_down_sema(&(pcmdpriv->cmd_queue_sema))) == _FAIL) { ++ LOG_LEVEL(_drv_err_, FUNC_ADPT_FMT" _rtw_down_sema(&pcmdpriv->cmd_queue_sema) return _FAIL, break\n", FUNC_ADPT_ARG(padapter)); ++ break; ++ } ++ ++ if (pcmdpriv->stop_req) { ++ LOG_LEVEL(_drv_err_, FUNC_ADPT_FMT" stop_req:%u, break\n", FUNC_ADPT_ARG(padapter), pcmdpriv->stop_req); ++ break; ++ } ++ ++#ifdef CONFIG_LPS_LCLK ++ if (rtw_register_cmd_alive(padapter) != _SUCCESS) ++ { ++ continue; ++ } ++#endif ++ ++_next: ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved == _TRUE)) ++ { ++ LOG_LEVEL(_drv_err_, "%s: DriverStopped(%d) SurpriseRemoved(%d) break at line %d\n", ++ __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved, __LINE__); ++ break; ++ } ++ ++ if(!(pcmd = rtw_dequeue_cmd(pcmdpriv))) { ++#ifdef CONFIG_LPS_LCLK ++ rtw_unregister_cmd_alive(padapter); ++#endif ++ continue; ++ } ++ ++ if( _FAIL == rtw_cmd_filter(pcmdpriv, pcmd) ) ++ { ++ pcmd->res = H2C_DROPPED; ++ goto post_process; ++ } ++ ++ if( _FAIL == rtw_cmd_filter(pcmdpriv, pcmd) ) { ++ rtw_free_cmd_obj(pcmd); ++ continue; ++ } ++ ++ pcmdpriv->cmd_issued_cnt++; ++ ++ pcmd->cmdsz = _RND4((pcmd->cmdsz));//_RND4 ++ ++ _rtw_memcpy(pcmdbuf, pcmd->parmbuf, pcmd->cmdsz); ++ ++ if(pcmd->cmdcode <= (sizeof(wlancmds) /sizeof(struct cmd_hdl))) ++ { ++ cmd_hdl = wlancmds[pcmd->cmdcode].h2cfuns; ++ ++ if (cmd_hdl) ++ { ++ ret = cmd_hdl(pcmd->padapter, pcmdbuf); ++ pcmd->res = ret; ++ } ++ ++ pcmdpriv->cmd_seq++; ++ } ++ else ++ { ++ pcmd->res = H2C_PARAMETERS_ERROR; ++ } ++ ++ cmd_hdl = NULL; ++ ++post_process: ++ ++ //call callback function for post-processed ++ if(pcmd->cmdcode <= (sizeof(rtw_cmd_callback) /sizeof(struct _cmd_callback))) ++ { ++ pcmd_callback = rtw_cmd_callback[pcmd->cmdcode].callback; ++ if(pcmd_callback == NULL) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("mlme_cmd_hdl(): pcmd_callback=0x%p, cmdcode=0x%x\n", pcmd_callback, pcmd->cmdcode)); ++ rtw_free_cmd_obj(pcmd); ++ } ++ else ++ { ++ //todo: !!! fill rsp_buf to pcmd->rsp if (pcmd->rsp!=NULL) ++ pcmd_callback(pcmd->padapter, pcmd);//need conider that free cmd_obj in rtw_cmd_callback ++ } ++ } ++ ++ flush_signals_thread(); ++ ++ goto _next; ++ ++ } ++ pcmdpriv->cmdthd_running=_FALSE; ++ ++ ++ // free all cmd_obj resources ++ do{ ++ pcmd = rtw_dequeue_cmd(pcmdpriv); ++ if(pcmd==NULL) ++ break; ++ ++ //DBG_871X("%s: leaving... drop cmdcode:%u\n", __FUNCTION__, pcmd->cmdcode); ++ ++ rtw_free_cmd_obj(pcmd); ++ }while(1); ++ ++ _rtw_up_sema(&pcmdpriv->terminate_cmdthread_sema); ++ ++_func_exit_; ++ ++ thread_exit(); ++ ++} ++ ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++u32 rtw_enqueue_evt(struct evt_priv *pevtpriv, struct evt_obj *obj) ++{ ++ _irqL irqL; ++ int res; ++ _queue *queue = &pevtpriv->evt_queue; ++ ++_func_enter_; ++ ++ res = _SUCCESS; ++ ++ if (obj == NULL) { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ rtw_list_insert_tail(&obj->list, &queue->queue); ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++ //rtw_evt_notify_isr(pevtpriv); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++struct evt_obj *rtw_dequeue_evt(_queue *queue) ++{ ++ _irqL irqL; ++ struct evt_obj *pevtobj; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ if (rtw_is_list_empty(&(queue->queue))) ++ pevtobj = NULL; ++ else ++ { ++ pevtobj = LIST_CONTAINOR(get_next(&(queue->queue)), struct evt_obj, list); ++ rtw_list_delete(&pevtobj->list); ++ } ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return pevtobj; ++} ++ ++void rtw_free_evt_obj(struct evt_obj *pevtobj) ++{ ++_func_enter_; ++ ++ if(pevtobj->parmbuf) ++ rtw_mfree((unsigned char*)pevtobj->parmbuf, pevtobj->evtsz); ++ ++ rtw_mfree((unsigned char*)pevtobj, sizeof(struct evt_obj)); ++ ++_func_exit_; ++} ++ ++void rtw_evt_notify_isr(struct evt_priv *pevtpriv) ++{ ++_func_enter_; ++ pevtpriv->evt_done_cnt++; ++ _rtw_up_sema(&(pevtpriv->evt_notify)); ++_func_exit_; ++} ++#endif ++ ++ ++/* ++u8 rtw_setstandby_cmd(unsigned char *adapter) ++*/ ++u8 rtw_setstandby_cmd(_adapter *padapter, uint action) ++{ ++ struct cmd_obj* ph2c; ++ struct usb_suspend_parm* psetusbsuspend; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ ++ u8 ret = _SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if (ph2c == NULL) { ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ psetusbsuspend = (struct usb_suspend_parm*)rtw_zmalloc(sizeof(struct usb_suspend_parm)); ++ if (psetusbsuspend == NULL) { ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ psetusbsuspend->action = action; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetusbsuspend, GEN_CMD_CODE(_SetUsbSuspend)); ++ ++ ret = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++/* ++rtw_sitesurvey_cmd(~) ++ ### NOTE:#### (!!!!) ++ MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock ++*/ ++u8 rtw_sitesurvey_cmd(_adapter *padapter, NDIS_802_11_SSID *ssid, int ssid_num, ++ struct rtw_ieee80211_channel *ch, int ch_num) ++{ ++ u8 res = _FAIL; ++ struct cmd_obj *ph2c; ++ struct sitesurvey_parm *psurveyPara; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++#ifdef CONFIG_LPS ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE){ ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1); ++ } ++#endif ++ ++#ifdef CONFIG_P2P_PS ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ p2p_ps_wk_cmd(padapter, P2P_PS_SCAN, 1); ++ } ++#endif // CONFIG_P2P_PS ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if (ph2c == NULL) ++ return _FAIL; ++ ++ psurveyPara = (struct sitesurvey_parm*)rtw_zmalloc(sizeof(struct sitesurvey_parm)); ++ if (psurveyPara == NULL) { ++ rtw_mfree((unsigned char*) ph2c, sizeof(struct cmd_obj)); ++ return _FAIL; ++ } ++ ++ rtw_free_network_queue(padapter, _FALSE); ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, ("\nflush network queue\n\n")); ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psurveyPara, GEN_CMD_CODE(_SiteSurvey)); ++ ++ /* psurveyPara->bsslimit = 48; */ ++ psurveyPara->scan_mode = pmlmepriv->scan_mode; ++ ++ /* prepare ssid list */ ++ if (ssid) { ++ int i; ++ for (i=0; issid[i], &ssid[i], sizeof(NDIS_802_11_SSID)); ++ psurveyPara->ssid_num++; ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" ssid:(%s, %d)\n", FUNC_ADPT_ARG(padapter), ++ psurveyPara->ssid[i].Ssid, psurveyPara->ssid[i].SsidLength); ++ } ++ } ++ } ++ ++ /* prepare channel list */ ++ if (ch) { ++ int i; ++ for (i=0; ich[i], &ch[i], sizeof(struct rtw_ieee80211_channel)); ++ psurveyPara->ch_num++; ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" ch:%u\n", FUNC_ADPT_ARG(padapter), ++ psurveyPara->ch[i].hw_value); ++ } ++ } ++ } ++ ++ set_fwstate(pmlmepriv, _FW_UNDER_SURVEY); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++ if(res == _SUCCESS) { ++ ++ pmlmepriv->scan_start_time = rtw_get_current_time(); ++ ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ if (padapter->pbuddy_adapter == NULL ) ++ goto full_scan_timeout; ++ if((padapter->pbuddy_adapter->mlmeextpriv.mlmext_info.state&0x03) == WIFI_FW_AP_STATE) ++ _set_timer(&pmlmepriv->scan_to_timer, ++ SURVEY_TO * ( padapter->mlmeextpriv.max_chan_nums + ( padapter->mlmeextpriv.max_chan_nums / RTW_SCAN_NUM_OF_CH ) * RTW_STAY_AP_CH_MILLISECOND ) + 1000 ); ++ else ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++full_scan_timeout: ++ _set_timer(&pmlmepriv->scan_to_timer, SCANNING_TIMEOUT); ++ ++ rtw_led_control(padapter, LED_CTL_SITE_SURVEY); ++ ++ pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec ++ } else { ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY); ++ } ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_setdatarate_cmd(_adapter *padapter, u8 *rateset) ++{ ++ struct cmd_obj* ph2c; ++ struct setdatarate_parm* pbsetdataratepara; ++ struct cmd_priv* pcmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if (ph2c == NULL) { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pbsetdataratepara = (struct setdatarate_parm*)rtw_zmalloc(sizeof(struct setdatarate_parm)); ++ if (pbsetdataratepara == NULL) { ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pbsetdataratepara, GEN_CMD_CODE(_SetDataRate)); ++#ifdef MP_FIRMWARE_OFFLOAD ++ pbsetdataratepara->curr_rateidx = *(u32*)rateset; ++// _rtw_memcpy(pbsetdataratepara, rateset, sizeof(u32)); ++#else ++ pbsetdataratepara->mac_id = 5; ++ _rtw_memcpy(pbsetdataratepara->datarates, rateset, NumRates); ++#endif ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_setbasicrate_cmd(_adapter *padapter, u8 *rateset) ++{ ++ struct cmd_obj* ph2c; ++ struct setbasicrate_parm* pssetbasicratepara; ++ struct cmd_priv* pcmdpriv=&padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if (ph2c == NULL) { ++ res= _FAIL; ++ goto exit; ++ } ++ pssetbasicratepara = (struct setbasicrate_parm*)rtw_zmalloc(sizeof(struct setbasicrate_parm)); ++ ++ if (pssetbasicratepara == NULL) { ++ rtw_mfree((u8*) ph2c, sizeof(struct cmd_obj)); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pssetbasicratepara, _SetBasicRate_CMD_); ++ ++ _rtw_memcpy(pssetbasicratepara->basicrates, rateset, NumRates); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++ ++/* ++unsigned char rtw_setphy_cmd(unsigned char *adapter) ++ ++1. be called only after rtw_update_registrypriv_dev_network( ~) or mp testing program ++2. for AdHoc/Ap mode or mp mode? ++ ++*/ ++u8 rtw_setphy_cmd(_adapter *padapter, u8 modem, u8 ch) ++{ ++ struct cmd_obj* ph2c; ++ struct setphy_parm* psetphypara; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++// struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++// struct registry_priv* pregistry_priv = &padapter->registrypriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ psetphypara = (struct setphy_parm*)rtw_zmalloc(sizeof(struct setphy_parm)); ++ ++ if(psetphypara==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetphypara, _SetPhy_CMD_); ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("CH=%d, modem=%d", ch, modem)); ++ ++ psetphypara->modem = modem; ++ psetphypara->rfchannel = ch; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++} ++ ++u8 rtw_setbbreg_cmd(_adapter*padapter, u8 offset, u8 val) ++{ ++ struct cmd_obj* ph2c; ++ struct writeBB_parm* pwritebbparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++_func_enter_; ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ pwritebbparm = (struct writeBB_parm*)rtw_zmalloc(sizeof(struct writeBB_parm)); ++ ++ if(pwritebbparm==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pwritebbparm, GEN_CMD_CODE(_SetBBReg)); ++ ++ pwritebbparm->offset = offset; ++ pwritebbparm->value = val; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++} ++ ++u8 rtw_getbbreg_cmd(_adapter *padapter, u8 offset, u8 *pval) ++{ ++ struct cmd_obj* ph2c; ++ struct readBB_parm* prdbbparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res=_FAIL; ++ goto exit; ++ } ++ prdbbparm = (struct readBB_parm*)rtw_zmalloc(sizeof(struct readBB_parm)); ++ ++ if(prdbbparm ==NULL){ ++ rtw_mfree((unsigned char *) ph2c, sizeof(struct cmd_obj)); ++ return _FAIL; ++ } ++ ++ _rtw_init_listhead(&ph2c->list); ++ ph2c->cmdcode =GEN_CMD_CODE(_GetBBReg); ++ ph2c->parmbuf = (unsigned char *)prdbbparm; ++ ph2c->cmdsz = sizeof(struct readBB_parm); ++ ph2c->rsp = pval; ++ ph2c->rspsz = sizeof(struct readBB_rsp); ++ ++ prdbbparm ->offset = offset; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++} ++ ++u8 rtw_setrfreg_cmd(_adapter *padapter, u8 offset, u32 val) ++{ ++ struct cmd_obj* ph2c; ++ struct writeRF_parm* pwriterfparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++_func_enter_; ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ pwriterfparm = (struct writeRF_parm*)rtw_zmalloc(sizeof(struct writeRF_parm)); ++ ++ if(pwriterfparm==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pwriterfparm, GEN_CMD_CODE(_SetRFReg)); ++ ++ pwriterfparm->offset = offset; ++ pwriterfparm->value = val; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++} ++ ++u8 rtw_getrfreg_cmd(_adapter *padapter, u8 offset, u8 *pval) ++{ ++ struct cmd_obj* ph2c; ++ struct readRF_parm* prdrfparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ prdrfparm = (struct readRF_parm*)rtw_zmalloc(sizeof(struct readRF_parm)); ++ if(prdrfparm ==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_init_listhead(&ph2c->list); ++ ph2c->cmdcode =GEN_CMD_CODE(_GetRFReg); ++ ph2c->parmbuf = (unsigned char *)prdrfparm; ++ ph2c->cmdsz = sizeof(struct readRF_parm); ++ ph2c->rsp = pval; ++ ph2c->rspsz = sizeof(struct readRF_rsp); ++ ++ prdrfparm ->offset = offset; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++void rtw_getbbrfreg_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++ _func_enter_; ++ ++ //rtw_free_cmd_obj(pcmd); ++ rtw_mfree((unsigned char*) pcmd->parmbuf, pcmd->cmdsz); ++ rtw_mfree((unsigned char*) pcmd, sizeof(struct cmd_obj)); ++ ++#ifdef CONFIG_MP_INCLUDED ++ padapter->mppriv.workparam.bcompleted= _TRUE; ++#endif ++_func_exit_; ++} ++ ++void rtw_readtssi_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++ _func_enter_; ++ ++ rtw_mfree((unsigned char*) pcmd->parmbuf, pcmd->cmdsz); ++ rtw_mfree((unsigned char*) pcmd, sizeof(struct cmd_obj)); ++ ++#ifdef CONFIG_MP_INCLUDED ++ padapter->mppriv.workparam.bcompleted= _TRUE; ++#endif ++ ++_func_exit_; ++} ++ ++u8 rtw_createbss_cmd(_adapter *padapter) ++{ ++ struct cmd_obj* pcmd; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ WLAN_BSSID_EX *pdev_network = &padapter->registrypriv.dev_network; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ rtw_led_control(padapter, LED_CTL_START_TO_LINK); ++ ++ if (pmlmepriv->assoc_ssid.SsidLength == 0){ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,(" createbss for Any SSid:%s\n",pmlmepriv->assoc_ssid.Ssid)); ++ } else { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,(" createbss for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid)); ++ } ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_init_listhead(&pcmd->list); ++ pcmd->cmdcode = _CreateBss_CMD_; ++ pcmd->parmbuf = (unsigned char *)pdev_network; ++ pcmd->cmdsz = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX*)pdev_network); ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ pdev_network->Length = pcmd->cmdsz; ++ ++#ifdef CONFIG_RTL8712 ++ //notes: translate IELength & Length after assign the Length to cmdsz; ++ pdev_network->Length = cpu_to_le32(pcmd->cmdsz); ++ pdev_network->IELength = cpu_to_le32(pdev_network->IELength); ++ pdev_network->Ssid.SsidLength = cpu_to_le32(pdev_network->Ssid.SsidLength); ++#endif ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_createbss_cmd_ex(_adapter *padapter, unsigned char *pbss, unsigned int sz) ++{ ++ struct cmd_obj* pcmd; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_init_listhead(&pcmd->list); ++ pcmd->cmdcode = GEN_CMD_CODE(_CreateBss); ++ pcmd->parmbuf = pbss; ++ pcmd->cmdsz = sz; ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_joinbss_cmd(_adapter *padapter, struct wlan_network* pnetwork) ++{ ++ u8 *auth, res = _SUCCESS; ++ uint t_len = 0; ++ WLAN_BSSID_EX *psecnetwork; ++ struct cmd_obj *pcmd; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv= &pmlmepriv->qospriv; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE ndis_network_mode = pnetwork->network.InfrastructureMode; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++_func_enter_; ++ ++ rtw_led_control(padapter, LED_CTL_START_TO_LINK); ++ ++ if (pmlmepriv->assoc_ssid.SsidLength == 0){ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, ("+Join cmd: Any SSid\n")); ++ } else { ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+Join cmd: SSid=[%s]\n", pmlmepriv->assoc_ssid.Ssid)); ++ } ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res=_FAIL; ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd: memory allocate for cmd_obj fail!!!\n")); ++ goto exit; ++ } ++ /* // for IEs is pointer ++ t_len = sizeof (ULONG) + sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + ++ sizeof (NDIS_802_11_SSID) + sizeof (ULONG) + ++ sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + ++ sizeof (NDIS_802_11_CONFIGURATION) + ++ sizeof (NDIS_802_11_NETWORK_INFRASTRUCTURE) + ++ sizeof (NDIS_802_11_RATES_EX)+ sizeof(WLAN_PHY_INFO)+ sizeof (ULONG) + MAX_IE_SZ; ++ */ ++ //for IEs is fix buf size ++ t_len = sizeof(WLAN_BSSID_EX); ++ ++ ++ //for hidden ap to set fw_state here ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) != _TRUE) ++ { ++ switch(ndis_network_mode) ++ { ++ case Ndis802_11IBSS: ++ set_fwstate(pmlmepriv, WIFI_ADHOC_STATE); ++ break; ++ ++ case Ndis802_11Infrastructure: ++ set_fwstate(pmlmepriv, WIFI_STATION_STATE); ++ break; ++ ++ case Ndis802_11APMode: ++ case Ndis802_11AutoUnknown: ++ case Ndis802_11InfrastructureMax: ++ break; ++ ++ } ++ } ++ ++ psecnetwork=(WLAN_BSSID_EX *)&psecuritypriv->sec_bss; ++ if(psecnetwork==NULL) ++ { ++ if(pcmd !=NULL) ++ rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj)); ++ ++ res=_FAIL; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd :psecnetwork==NULL!!!\n")); ++ ++ goto exit; ++ } ++ ++ _rtw_memset(psecnetwork, 0, t_len); ++ ++ _rtw_memcpy(psecnetwork, &pnetwork->network, get_WLAN_BSSID_EX_sz(&pnetwork->network)); ++ ++ auth=&psecuritypriv->authenticator_ie[0]; ++ psecuritypriv->authenticator_ie[0]=(unsigned char)psecnetwork->IELength; ++ ++ if((psecnetwork->IELength-12) < (256-1)) { ++ _rtw_memcpy(&psecuritypriv->authenticator_ie[1], &psecnetwork->IEs[12], psecnetwork->IELength-12); ++ } else { ++ _rtw_memcpy(&psecuritypriv->authenticator_ie[1], &psecnetwork->IEs[12], (256-1)); ++ } ++ ++ psecnetwork->IELength = 0; ++ // Added by Albert 2009/02/18 ++ // If the the driver wants to use the bssid to create the connection. ++ // If not, we have to copy the connecting AP's MAC address to it so that ++ // the driver just has the bssid information for PMKIDList searching. ++ ++ if ( pmlmepriv->assoc_by_bssid == _FALSE ) ++ { ++ _rtw_memcpy( &pmlmepriv->assoc_bssid[ 0 ], &pnetwork->network.MacAddress[ 0 ], ETH_ALEN ); ++ } ++ ++ psecnetwork->IELength = rtw_restruct_sec_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], pnetwork->network.IELength); ++ ++ ++ pqospriv->qos_option = 0; ++ ++ if(pregistrypriv->wmm_enable) ++ { ++ u32 tmp_len; ++ ++ tmp_len = rtw_restruct_wmm_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], pnetwork->network.IELength, psecnetwork->IELength); ++ ++ if (psecnetwork->IELength != tmp_len) ++ { ++ psecnetwork->IELength = tmp_len; ++ pqospriv->qos_option = 1; //There is WMM IE in this corresp. beacon ++ } ++ else ++ { ++ pqospriv->qos_option = 0;//There is no WMM IE in this corresp. beacon ++ } ++ } ++ ++#ifdef CONFIG_80211N_HT ++ phtpriv->ht_option = _FALSE; ++ if(pregistrypriv->ht_enable) ++ { ++ // Added by Albert 2010/06/23 ++ // For the WEP mode, we will use the bg mode to do the connection to avoid some IOT issue. ++ // Especially for Realtek 8192u SoftAP. ++ if ( ( padapter->securitypriv.dot11PrivacyAlgrthm != _WEP40_ ) && ++ ( padapter->securitypriv.dot11PrivacyAlgrthm != _WEP104_ ) && ++ ( padapter->securitypriv.dot11PrivacyAlgrthm != _TKIP_ )) ++ { ++ //rtw_restructure_ht_ie ++ rtw_restructure_ht_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], ++ pnetwork->network.IELength, &psecnetwork->IELength, (u8)psecnetwork->Configuration.DSConfig ); ++ } ++ } ++ ++#endif ++ ++ pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pnetwork->network.IEs, pnetwork->network.IELength); ++ ++ #if 0 ++ psecuritypriv->supplicant_ie[0]=(u8)psecnetwork->IELength; ++ ++ if(psecnetwork->IELength < (256-1)) ++ { ++ _rtw_memcpy(&psecuritypriv->supplicant_ie[1], &psecnetwork->IEs[0], psecnetwork->IELength); ++ } ++ else ++ { ++ _rtw_memcpy(&psecuritypriv->supplicant_ie[1], &psecnetwork->IEs[0], (256-1)); ++ } ++ #endif ++ ++ pcmd->cmdsz = get_WLAN_BSSID_EX_sz(psecnetwork);//get cmdsz before endian conversion ++ ++#ifdef CONFIG_RTL8712 ++ //wlan_network endian conversion ++ psecnetwork->Length = cpu_to_le32(psecnetwork->Length); ++ psecnetwork->Ssid.SsidLength= cpu_to_le32(psecnetwork->Ssid.SsidLength); ++ psecnetwork->Privacy = cpu_to_le32(psecnetwork->Privacy); ++ psecnetwork->Rssi = cpu_to_le32(psecnetwork->Rssi); ++ psecnetwork->NetworkTypeInUse = cpu_to_le32(psecnetwork->NetworkTypeInUse); ++ psecnetwork->Configuration.ATIMWindow = cpu_to_le32(psecnetwork->Configuration.ATIMWindow); ++ psecnetwork->Configuration.BeaconPeriod = cpu_to_le32(psecnetwork->Configuration.BeaconPeriod); ++ psecnetwork->Configuration.DSConfig = cpu_to_le32(psecnetwork->Configuration.DSConfig); ++ psecnetwork->Configuration.FHConfig.DwellTime=cpu_to_le32(psecnetwork->Configuration.FHConfig.DwellTime); ++ psecnetwork->Configuration.FHConfig.HopPattern=cpu_to_le32(psecnetwork->Configuration.FHConfig.HopPattern); ++ psecnetwork->Configuration.FHConfig.HopSet=cpu_to_le32(psecnetwork->Configuration.FHConfig.HopSet); ++ psecnetwork->Configuration.FHConfig.Length=cpu_to_le32(psecnetwork->Configuration.FHConfig.Length); ++ psecnetwork->Configuration.Length = cpu_to_le32(psecnetwork->Configuration.Length); ++ psecnetwork->InfrastructureMode = cpu_to_le32(psecnetwork->InfrastructureMode); ++ psecnetwork->IELength = cpu_to_le32(psecnetwork->IELength); ++#endif ++ ++ _rtw_init_listhead(&pcmd->list); ++ pcmd->cmdcode = _JoinBss_CMD_;//GEN_CMD_CODE(_JoinBss) ++ pcmd->parmbuf = (unsigned char *)psecnetwork; ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_disassoc_cmd(_adapter*padapter, u32 deauth_timeout_ms, bool enqueue) /* for sta_mode */ ++{ ++ struct cmd_obj *cmdobj = NULL; ++ struct disconnect_parm *param = NULL; ++ struct cmd_priv *cmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_disassoc_cmd\n")); ++ ++ /* prepare cmd parameter */ ++ param = (struct disconnect_parm *)rtw_zmalloc(sizeof(*param)); ++ if (param == NULL) { ++ res = _FAIL; ++ goto exit; ++ } ++ param->deauth_timeout_ms = deauth_timeout_ms; ++ ++ if (enqueue) { ++ /* need enqueue, prepare cmd_obj and enqueue */ ++ cmdobj = (struct cmd_obj *)rtw_zmalloc(sizeof(*cmdobj)); ++ if (cmdobj == NULL) { ++ res = _FAIL; ++ rtw_mfree((u8 *)param, sizeof(*param)); ++ goto exit; ++ } ++ init_h2fwcmd_w_parm_no_rsp(cmdobj, param, _DisConnect_CMD_); ++ res = rtw_enqueue_cmd(cmdpriv, cmdobj); ++ } else { ++ /* no need to enqueue, do the cmd hdl directly and free cmd parameter */ ++ if (H2C_SUCCESS != disconnect_hdl(padapter, (u8 *)param)) ++ res = _FAIL; ++ rtw_mfree((u8 *)param, sizeof(*param)); ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_setopmode_cmd(_adapter *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype) ++{ ++ struct cmd_obj* ph2c; ++ struct setopmode_parm* psetop; ++ ++ struct cmd_priv *pcmdpriv= &padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FALSE; ++ goto exit; ++ } ++ psetop = (struct setopmode_parm*)rtw_zmalloc(sizeof(struct setopmode_parm)); ++ ++ if(psetop==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FALSE; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetop, _SetOpMode_CMD_); ++ psetop->mode = (u8)networktype; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_setstakey_cmd(_adapter *padapter, u8 *psta, u8 unicast_key) ++{ ++ struct cmd_obj* ph2c; ++ struct set_stakey_parm *psetstakey_para; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ struct set_stakey_rsp *psetstakey_rsp = NULL; ++ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct sta_info* sta = (struct sta_info* )psta; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if ( ph2c == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm)); ++ if(psetstakey_para==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ psetstakey_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_stakey_rsp)); ++ if(psetstakey_rsp == NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ rtw_mfree((u8 *) psetstakey_para, sizeof(struct set_stakey_parm)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_); ++ ph2c->rsp = (u8 *) psetstakey_rsp; ++ ph2c->rspsz = sizeof(struct set_stakey_rsp); ++ ++ _rtw_memcpy(psetstakey_para->addr, sta->hwaddr,ETH_ALEN); ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE)){ ++#ifdef CONFIG_TDLS ++ if(sta->tdls_sta_state&TDLS_LINKED_STATE) ++ psetstakey_para->algorithm=(u8)sta->dot118021XPrivacy; ++ else ++#endif //CONFIG_TDLS ++ psetstakey_para->algorithm =(unsigned char) psecuritypriv->dot11PrivacyAlgrthm; ++ }else{ ++ GET_ENCRY_ALGO(psecuritypriv, sta, psetstakey_para->algorithm, _FALSE); ++ } ++ ++ if (unicast_key == _TRUE) { ++#ifdef CONFIG_TDLS ++ if(sta->tdls_sta_state&TDLS_LINKED_STATE) ++ _rtw_memcpy(&psetstakey_para->key, sta->tpk.tk, 16); ++ else ++#endif //CONFIG_TDLS ++ _rtw_memcpy(&psetstakey_para->key, &sta->dot118021x_UncstKey, 16); ++ } else { ++ _rtw_memcpy(&psetstakey_para->key, &psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey, 16); ++ } ++ ++ //jeff: set this becasue at least sw key is ready ++ padapter->securitypriv.busetkipkey=_TRUE; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_clearstakey_cmd(_adapter *padapter, u8 *psta, u8 entry, u8 enqueue) ++{ ++ struct cmd_obj* ph2c; ++ struct set_stakey_parm *psetstakey_para; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ struct set_stakey_rsp *psetstakey_rsp = NULL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct sta_info* sta = (struct sta_info* )psta; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ if(!enqueue) ++ { ++ clear_cam_entry(padapter, entry); ++ } ++ else ++ { ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if ( ph2c == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm)); ++ if(psetstakey_para==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ psetstakey_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_stakey_rsp)); ++ if(psetstakey_rsp == NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ rtw_mfree((u8 *) psetstakey_para, sizeof(struct set_stakey_parm)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_); ++ ph2c->rsp = (u8 *) psetstakey_rsp; ++ ph2c->rspsz = sizeof(struct set_stakey_rsp); ++ ++ _rtw_memcpy(psetstakey_para->addr, sta->hwaddr, ETH_ALEN); ++ ++ psetstakey_para->algorithm = _NO_PRIVACY_; ++ ++ psetstakey_para->id = entry; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_setrttbl_cmd(_adapter *padapter, struct setratable_parm *prate_table) ++{ ++ struct cmd_obj* ph2c; ++ struct setratable_parm * psetrttblparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ psetrttblparm = (struct setratable_parm*)rtw_zmalloc(sizeof(struct setratable_parm)); ++ ++ if(psetrttblparm==NULL){ ++ rtw_mfree((unsigned char *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetrttblparm, GEN_CMD_CODE(_SetRaTable)); ++ ++ _rtw_memcpy(psetrttblparm,prate_table,sizeof(struct setratable_parm)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++ ++} ++ ++u8 rtw_getrttbl_cmd(_adapter *padapter, struct getratable_rsp *pval) ++{ ++ struct cmd_obj* ph2c; ++ struct getratable_parm * pgetrttblparm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ pgetrttblparm = (struct getratable_parm*)rtw_zmalloc(sizeof(struct getratable_parm)); ++ ++ if(pgetrttblparm==NULL){ ++ rtw_mfree((unsigned char *) ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++// init_h2fwcmd_w_parm_no_rsp(ph2c, psetrttblparm, GEN_CMD_CODE(_SetRaTable)); ++ ++ _rtw_init_listhead(&ph2c->list); ++ ph2c->cmdcode =GEN_CMD_CODE(_GetRaTable); ++ ph2c->parmbuf = (unsigned char *)pgetrttblparm; ++ ph2c->cmdsz = sizeof(struct getratable_parm); ++ ph2c->rsp = (u8*)pval; ++ ph2c->rspsz = sizeof(struct getratable_rsp); ++ ++ pgetrttblparm ->rsvd = 0x0; ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++exit: ++_func_exit_; ++ return res; ++ ++} ++ ++u8 rtw_setassocsta_cmd(_adapter *padapter, u8 *mac_addr) ++{ ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ struct cmd_obj* ph2c; ++ struct set_assocsta_parm *psetassocsta_para; ++ struct set_stakey_rsp *psetassocsta_rsp = NULL; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ psetassocsta_para = (struct set_assocsta_parm*)rtw_zmalloc(sizeof(struct set_assocsta_parm)); ++ if(psetassocsta_para==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ psetassocsta_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_assocsta_rsp)); ++ if(psetassocsta_rsp==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ rtw_mfree((u8 *) psetassocsta_para, sizeof(struct set_assocsta_parm)); ++ return _FAIL; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetassocsta_para, _SetAssocSta_CMD_); ++ ph2c->rsp = (u8 *) psetassocsta_rsp; ++ ph2c->rspsz = sizeof(struct set_assocsta_rsp); ++ ++ _rtw_memcpy(psetassocsta_para->addr, mac_addr,ETH_ALEN); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ } ++ ++u8 rtw_addbareq_cmd(_adapter*padapter, u8 tid, u8 *addr) ++{ ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ struct cmd_obj* ph2c; ++ struct addBaReq_parm *paddbareq_parm; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ paddbareq_parm = (struct addBaReq_parm*)rtw_zmalloc(sizeof(struct addBaReq_parm)); ++ if(paddbareq_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ paddbareq_parm->tid = tid; ++ _rtw_memcpy(paddbareq_parm->addr, addr, ETH_ALEN); ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, paddbareq_parm, GEN_CMD_CODE(_AddBAReq)); ++ ++ //DBG_871X("rtw_addbareq_cmd, tid=%d\n", tid); ++ ++ //rtw_enqueue_cmd(pcmdpriv, ph2c); ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++//add for CONFIG_IEEE80211W, none 11w can use it ++u8 rtw_reset_securitypriv_cmd(_adapter*padapter) ++{ ++ struct cmd_obj* ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = RESET_SECURITYPRIV; ++ pdrvextra_cmd_parm->type_size = 0; ++ pdrvextra_cmd_parm->pbuf = (u8 *)padapter; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ ++ //rtw_enqueue_cmd(pcmdpriv, ph2c); ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++u8 rtw_free_assoc_resources_cmd(_adapter*padapter) ++{ ++ struct cmd_obj* ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = FREE_ASSOC_RESOURCES; ++ pdrvextra_cmd_parm->type_size = 0; ++ pdrvextra_cmd_parm->pbuf = (u8 *)padapter; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ ++ //rtw_enqueue_cmd(pcmdpriv, ph2c); ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++ ++u8 rtw_dynamic_chk_wk_cmd(_adapter*padapter) ++{ ++ struct cmd_obj* ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE)) ++ goto exit; ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->adapter_type != PRIMARY_ADAPTER && padapter->pbuddy_adapter) ++ pcmdpriv = &(padapter->pbuddy_adapter->cmdpriv); ++#endif ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = DYNAMIC_CHK_WK_CID; ++ pdrvextra_cmd_parm->type_size = 0; ++ pdrvextra_cmd_parm->pbuf = (u8 *)padapter; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ ++ //rtw_enqueue_cmd(pcmdpriv, ph2c); ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++u8 rtw_set_ch_cmd(_adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue) ++{ ++ struct cmd_obj *pcmdobj; ++ struct set_ch_parm *set_ch_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ DBG_871X(FUNC_NDEV_FMT" ch:%u, bw:%u, ch_offset:%u\n", ++ FUNC_NDEV_ARG(padapter->pnetdev), ch, bw, ch_offset); ++ ++ /* check input parameter */ ++ ++ /* prepare cmd parameter */ ++ set_ch_parm = (struct set_ch_parm *)rtw_zmalloc(sizeof(*set_ch_parm)); ++ if (set_ch_parm == NULL) { ++ res= _FAIL; ++ goto exit; ++ } ++ set_ch_parm->ch = ch; ++ set_ch_parm->bw = bw; ++ set_ch_parm->ch_offset = ch_offset; ++ ++ if (enqueue) { ++ /* need enqueue, prepare cmd_obj and enqueue */ ++ pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmdobj == NULL){ ++ rtw_mfree((u8 *)set_ch_parm, sizeof(*set_ch_parm)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(pcmdobj, set_ch_parm, GEN_CMD_CODE(_SetChannel)); ++ res = rtw_enqueue_cmd(pcmdpriv, pcmdobj); ++ } else { ++ /* no need to enqueue, do the cmd hdl directly and free cmd parameter */ ++ if( H2C_SUCCESS !=set_ch_hdl(padapter, (u8 *)set_ch_parm) ) ++ res = _FAIL; ++ ++ rtw_mfree((u8 *)set_ch_parm, sizeof(*set_ch_parm)); ++ } ++ ++ /* do something based on res... */ ++ ++exit: ++ ++ DBG_871X(FUNC_NDEV_FMT" res:%u\n", FUNC_NDEV_ARG(padapter->pnetdev), res); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_set_chplan_cmd(_adapter*padapter, u8 chplan, u8 enqueue) ++{ ++ struct cmd_obj* pcmdobj; ++ struct SetChannelPlan_param *setChannelPlan_param; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_chplan_cmd\n")); ++ ++ //check input parameter ++ if(!rtw_is_channel_plan_valid(chplan)) { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ //prepare cmd parameter ++ setChannelPlan_param = (struct SetChannelPlan_param *)rtw_zmalloc(sizeof(struct SetChannelPlan_param)); ++ if(setChannelPlan_param == NULL) { ++ res= _FAIL; ++ goto exit; ++ } ++ setChannelPlan_param->channel_plan=chplan; ++ ++ if(enqueue) ++ { ++ //need enqueue, prepare cmd_obj and enqueue ++ pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmdobj == NULL){ ++ rtw_mfree((u8 *)setChannelPlan_param, sizeof(struct SetChannelPlan_param)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(pcmdobj, setChannelPlan_param, GEN_CMD_CODE(_SetChannelPlan)); ++ res = rtw_enqueue_cmd(pcmdpriv, pcmdobj); ++ } ++ else ++ { ++ //no need to enqueue, do the cmd hdl directly and free cmd parameter ++ if( H2C_SUCCESS !=set_chplan_hdl(padapter, (unsigned char *)setChannelPlan_param) ) ++ res = _FAIL; ++ ++ rtw_mfree((u8 *)setChannelPlan_param, sizeof(struct SetChannelPlan_param)); ++ } ++ ++ //do something based on res... ++ if(res == _SUCCESS) ++ padapter->mlmepriv.ChannelPlan = chplan; ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_led_blink_cmd(_adapter*padapter, PLED_871x pLed) ++{ ++ struct cmd_obj* pcmdobj; ++ struct LedBlink_param *ledBlink_param; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_led_blink_cmd\n")); ++ ++ pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmdobj == NULL){ ++ res=_FAIL; ++ goto exit; ++ } ++ ++ ledBlink_param = (struct LedBlink_param *)rtw_zmalloc(sizeof(struct LedBlink_param)); ++ if(ledBlink_param == NULL) { ++ rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ ledBlink_param->pLed=pLed; ++ ++ init_h2fwcmd_w_parm_no_rsp(pcmdobj, ledBlink_param, GEN_CMD_CODE(_LedBlink)); ++ res = rtw_enqueue_cmd(pcmdpriv, pcmdobj); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_set_csa_cmd(_adapter*padapter, u8 new_ch_no) ++{ ++ struct cmd_obj* pcmdobj; ++ struct SetChannelSwitch_param*setChannelSwitch_param; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_csa_cmd\n")); ++ ++ pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmdobj == NULL){ ++ res=_FAIL; ++ goto exit; ++ } ++ ++ setChannelSwitch_param = (struct SetChannelSwitch_param *)rtw_zmalloc(sizeof(struct SetChannelSwitch_param)); ++ if(setChannelSwitch_param == NULL) { ++ rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ setChannelSwitch_param->new_ch_no=new_ch_no; ++ ++ init_h2fwcmd_w_parm_no_rsp(pcmdobj, setChannelSwitch_param, GEN_CMD_CODE(_SetChannelSwitch)); ++ res = rtw_enqueue_cmd(pcmdpriv, pcmdobj); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_tdls_cmd(_adapter *padapter, u8 *addr, u8 option) ++{ ++ struct cmd_obj* pcmdobj; ++ struct TDLSoption_param *TDLSoption; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++#ifdef CONFIG_TDLS ++ ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_tdls_cmd\n")); ++ ++ pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmdobj == NULL){ ++ res=_FAIL; ++ goto exit; ++ } ++ ++ TDLSoption= (struct TDLSoption_param *)rtw_zmalloc(sizeof(struct TDLSoption_param)); ++ if(TDLSoption == NULL) { ++ rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_spinlock(&(padapter->tdlsinfo.cmd_lock)); ++ _rtw_memcpy(TDLSoption->addr, addr, 6); ++ TDLSoption->option = option; ++ _rtw_spinunlock(&(padapter->tdlsinfo.cmd_lock)); ++ init_h2fwcmd_w_parm_no_rsp(pcmdobj, TDLSoption, GEN_CMD_CODE(_TDLS)); ++ res = rtw_enqueue_cmd(pcmdpriv, pcmdobj); ++ ++#endif //CONFIG_TDLS ++ ++exit: ++ ++ ++_func_exit_; ++ ++ return res; ++} ++ ++static void traffic_status_watchdog(_adapter *padapter) ++{ ++#ifdef CONFIG_LPS ++ u8 bEnterPS; ++#endif ++ u16 BusyThreshold = 100; ++ u8 bBusyTraffic = _FALSE, bTxBusyTraffic = _FALSE, bRxBusyTraffic = _FALSE; ++ u8 bHigherBusyTraffic = _FALSE, bHigherBusyRxTraffic = _FALSE, bHigherBusyTxTraffic = _FALSE; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &(padapter->tdlsinfo); ++#endif //CONFIG_TDLS ++ ++ RT_LINK_DETECT_T * link_detect = &pmlmepriv->LinkDetectInfo; ++ ++ // ++ // Determine if our traffic is busy now ++ // ++ if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ /*&& !MgntInitAdapterInProgress(pMgntInfo)*/) ++ { ++ ++ // if we raise bBusyTraffic in last watchdog, using lower threshold. ++ if (pmlmepriv->LinkDetectInfo.bBusyTraffic) ++ BusyThreshold = 75; ++ if( pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > BusyThreshold || ++ pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > BusyThreshold ) ++ { ++ bBusyTraffic = _TRUE; ++ ++ if(pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > BusyThreshold) ++ bRxBusyTraffic = _TRUE; ++ ++ if(pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > BusyThreshold) ++ bTxBusyTraffic = _TRUE; ++ } ++ ++ // Higher Tx/Rx data. ++ if( pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > 4000 || ++ pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > 4000 ) ++ { ++ bHigherBusyTraffic = _TRUE; ++ ++ // Extremely high Rx data. ++ if(pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > 5000) ++ bHigherBusyRxTraffic = _TRUE; ++ ++ // Extremely high Tx data. ++ if(pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > 5000) ++ bHigherBusyTxTraffic = _TRUE; ++ } ++ ++#ifdef CONFIG_TRAFFIC_PROTECT ++#define TX_ACTIVE_TH 2 ++#define RX_ACTIVE_TH 1 ++#define TRAFFIC_PROTECT_PERIOD_MS 4500 ++ ++ if (link_detect->NumTxOkInPeriod > TX_ACTIVE_TH ++ || link_detect->NumRxUnicastOkInPeriod > RX_ACTIVE_TH) { ++ ++ LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT" acqiure wake_lock for %u ms(tx:%d,rx_unicast:%d)\n", ++ FUNC_ADPT_ARG(padapter), ++ TRAFFIC_PROTECT_PERIOD_MS, ++ link_detect->NumTxOkInPeriod, ++ link_detect->NumRxUnicastOkInPeriod); ++ ++ rtw_lock_suspend_timeout(TRAFFIC_PROTECT_PERIOD_MS); ++ } ++#endif ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_TDLS_AUTOSETUP ++ if( ( ptdlsinfo->watchdog_count % TDLS_WATCHDOG_PERIOD ) == 0 ) //TDLS_WATCHDOG_PERIOD * 2sec, periodically sending ++ issue_tdls_dis_req( padapter, NULL ); ++ ptdlsinfo->watchdog_count++; ++#endif //CONFIG_TDLS_AUTOSETUP ++#endif //CONFIG_TDLS ++ ++#ifdef CONFIG_LPS ++ // check traffic for powersaving. ++ if( ((pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod + pmlmepriv->LinkDetectInfo.NumTxOkInPeriod) > 8 ) || ++ (pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod > 2) ) ++ { ++ //DBG_871X("Tx = %d, Rx = %d \n",pmlmepriv->LinkDetectInfo.NumTxOkInPeriod,pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod); ++ bEnterPS= _FALSE; ++ } ++ else ++ { ++ bEnterPS= _TRUE; ++ } ++ ++ // LeisurePS only work in infra mode. ++ if(bEnterPS) ++ { ++ LPS_Enter(padapter); ++ } ++ else ++ { ++ LPS_Leave(padapter); ++ } ++#endif ++ } ++ else ++ { ++#ifdef CONFIG_LPS ++ LPS_Leave(padapter); ++#endif ++ } ++ ++ pmlmepriv->LinkDetectInfo.NumRxOkInPeriod = 0; ++ pmlmepriv->LinkDetectInfo.NumTxOkInPeriod = 0; ++ pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod = 0; ++ pmlmepriv->LinkDetectInfo.bBusyTraffic = bBusyTraffic; ++ pmlmepriv->LinkDetectInfo.bTxBusyTraffic = bTxBusyTraffic; ++ pmlmepriv->LinkDetectInfo.bRxBusyTraffic = bRxBusyTraffic; ++ pmlmepriv->LinkDetectInfo.bHigherBusyTraffic = bHigherBusyTraffic; ++ pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic = bHigherBusyRxTraffic; ++ pmlmepriv->LinkDetectInfo.bHigherBusyTxTraffic = bHigherBusyTxTraffic; ++ ++} ++ ++void dynamic_chk_wk_hdl(_adapter *padapter, u8 *pbuf, int sz); ++void dynamic_chk_wk_hdl(_adapter *padapter, u8 *pbuf, int sz) ++{ ++ struct mlme_priv *pmlmepriv; ++ ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE)) ++ return; ++ ++ if((void*)padapter != (void*)pbuf && padapter->pbuddy_adapter == NULL) ++ return; ++ ++ padapter = (_adapter *)pbuf; ++ ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE)) ++ return; ++ ++ pmlmepriv = &(padapter->mlmepriv); ++ ++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++#ifdef CONFIG_AP_MODE ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ expire_timeout_chk(padapter); ++ } ++#endif ++#endif //CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ rtw_hal_sreset_xmit_status_check(padapter); ++ #endif ++ ++ //if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING|_FW_UNDER_SURVEY)==_FALSE) ++ { ++ linked_status_chk(padapter); ++ traffic_status_watchdog(padapter); ++ } ++ ++ rtw_hal_dm_watchdog(padapter); ++ ++ //check_hw_pbc(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size); ++ ++} ++ ++#ifdef CONFIG_LPS ++ ++void lps_ctrl_wk_hdl(_adapter *padapter, u8 lps_ctrl_type); ++void lps_ctrl_wk_hdl(_adapter *padapter, u8 lps_ctrl_type) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 mstatus; ++ ++_func_enter_; ++ ++ if((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ || (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)) ++ { ++ return; ++ } ++ ++ switch(lps_ctrl_type) ++ { ++ case LPS_CTRL_SCAN: ++ //DBG_871X("LPS_CTRL_SCAN \n"); ++ LeaveAllPowerSaveMode(padapter); ++ break; ++ case LPS_CTRL_JOINBSS: ++ //DBG_871X("LPS_CTRL_JOINBSS \n"); ++ LPS_Leave(padapter); ++ break; ++ case LPS_CTRL_CONNECT: ++ //DBG_871X("LPS_CTRL_CONNECT \n"); ++ mstatus = 1; ++ // Reset LPS Setting ++ padapter->pwrctrlpriv.LpsIdleCount = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus)); ++ break; ++ case LPS_CTRL_DISCONNECT: ++ //DBG_871X("LPS_CTRL_DISCONNECT \n"); ++ mstatus = 0; ++ LPS_Leave(padapter); ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus)); ++ break; ++ case LPS_CTRL_SPECIAL_PACKET: ++ //DBG_871X("LPS_CTRL_SPECIAL_PACKET \n"); ++ pwrpriv->DelayLPSLastTimeStamp = rtw_get_current_time(); ++ LPS_Leave(padapter); ++ break; ++ ++ default: ++ break; ++ } ++ ++_func_exit_; ++} ++ ++u8 rtw_lps_ctrl_wk_cmd(_adapter*padapter, u8 lps_ctrl_type, u8 enqueue) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ //struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ //if(!pwrctrlpriv->bLeisurePs) ++ // return res; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->iface_type != IFACE_PORT0) ++ return res; ++#endif ++ ++ if(enqueue) ++ { ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = LPS_CTRL_WK_CID; ++ pdrvextra_cmd_parm->type_size = lps_ctrl_type; ++ pdrvextra_cmd_parm->pbuf = NULL; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ } ++ else ++ { ++ lps_ctrl_wk_hdl(padapter, lps_ctrl_type); ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++#endif ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ ++void antenna_select_wk_hdl(_adapter *padapter, u8 antenna) ++{ ++ rtw_hal_set_hwreg(padapter, HW_VAR_ANTENNA_DIVERSITY_SELECT, (u8 *)(&antenna)); ++} ++ ++u8 rtw_antenna_select_cmd(_adapter*padapter, u8 antenna,u8 enqueue) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ u8 bSupportAntDiv = _FALSE; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ rtw_hal_get_def_var(padapter, HAL_DEF_IS_SUPPORT_ANT_DIV, &(bSupportAntDiv)); ++ if(_FALSE == bSupportAntDiv ) return res; ++ ++ if(_TRUE == enqueue) ++ { ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = ANT_SELECT_WK_CID; ++ pdrvextra_cmd_parm->type_size = antenna; ++ pdrvextra_cmd_parm->pbuf = NULL; ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ } ++ else{ ++ antenna_select_wk_hdl(padapter,antenna ); ++ } ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++#endif ++ ++void power_saving_wk_hdl(_adapter *padapter, u8 *pbuf, int sz); ++void power_saving_wk_hdl(_adapter *padapter, u8 *pbuf, int sz) ++{ ++ rtw_ps_processor(padapter); ++} ++ ++//add for CONFIG_IEEE80211W, none 11w can use it ++void reset_securitypriv_hdl(_adapter *padapter) ++{ ++ rtw_reset_securitypriv(padapter); ++} ++ ++void free_assoc_resources_hdl(_adapter *padapter) ++{ ++ rtw_free_assoc_resources(padapter, 1); ++} ++ ++#ifdef CONFIG_P2P ++u8 p2p_protocol_wk_cmd(_adapter*padapter, int intCmdType ) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ return res; ++ } ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = P2P_PROTO_WK_CID; ++ pdrvextra_cmd_parm->type_size = intCmdType; // As the command tppe. ++ pdrvextra_cmd_parm->pbuf = NULL; // Must be NULL here ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++#endif //CONFIG_P2P ++ ++u8 rtw_ps_cmd(_adapter*padapter) ++{ ++ struct cmd_obj *ppscmd; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ u8 res = _SUCCESS; ++_func_enter_; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->adapter_type != PRIMARY_ADAPTER) ++ goto exit; ++#endif ++ ++ ppscmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ppscmd==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ppscmd, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = POWER_SAVING_CTRL_WK_CID; ++ pdrvextra_cmd_parm->pbuf = NULL; ++ init_h2fwcmd_w_parm_no_rsp(ppscmd, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ppscmd); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++#ifdef CONFIG_AP_MODE ++ ++static void rtw_chk_hi_queue_hdl(_adapter *padapter) ++{ ++ int cnt=0; ++ struct sta_info *psta_bmc; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ psta_bmc = rtw_get_bcmc_stainfo(padapter); ++ if(!psta_bmc) ++ return; ++ ++ ++ if(psta_bmc->sleepq_len==0) ++ { ++ while((rtw_read32(padapter, 0x414)&0x00ffff00)!=0) ++ { ++ rtw_msleep_os(100); ++ ++ cnt++; ++ ++ if(cnt>10) ++ break; ++ } ++ ++ if(cnt<=10) ++ { ++ pstapriv->tim_bitmap &= ~BIT(0); ++ pstapriv->sta_dz_bitmap &= ~BIT(0); ++ ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ } ++ } ++ ++} ++ ++u8 rtw_chk_hi_queue_cmd(_adapter*padapter) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = CHECK_HIQ_WK_CID; ++ pdrvextra_cmd_parm->type_size = 0; ++ pdrvextra_cmd_parm->pbuf = NULL; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++ return res; ++ ++} ++#endif ++ ++u8 rtw_c2h_wk_cmd(PADAPTER padapter, u8 *c2h_evt) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if (ph2c == NULL) { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if (pdrvextra_cmd_parm == NULL) { ++ rtw_mfree((u8*)ph2c, sizeof(struct cmd_obj)); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = C2H_WK_CID; ++ pdrvextra_cmd_parm->type_size = c2h_evt?16:0; ++ pdrvextra_cmd_parm->pbuf = c2h_evt; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++ return res; ++} ++ ++s32 c2h_evt_hdl(_adapter *adapter, struct c2h_evt_hdr *c2h_evt, c2h_id_filter filter) ++{ ++ s32 ret = _FAIL; ++ u8 buf[16]; ++ ++ if (!c2h_evt) { ++ /* No c2h event in cmd_obj, read c2h event before handling*/ ++ if (c2h_evt_read(adapter, buf) == _SUCCESS) { ++ c2h_evt = (struct c2h_evt_hdr *)buf; ++ ++ if (filter && filter(c2h_evt->id) == _FALSE) ++ goto exit; ++ ++ ret = rtw_hal_c2h_handler(adapter, c2h_evt); ++ } ++ } else { ++ ++ if (filter && filter(c2h_evt->id) == _FALSE) ++ goto exit; ++ ++ ret = rtw_hal_c2h_handler(adapter, c2h_evt); ++ } ++exit: ++ return ret; ++} ++ ++#ifdef CONFIG_C2H_WK ++static void c2h_wk_callback(_workitem *work) ++{ ++ struct evt_priv *evtpriv = container_of(work, struct evt_priv, c2h_wk); ++ _adapter *adapter = container_of(evtpriv, _adapter, evtpriv); ++ struct c2h_evt_hdr *c2h_evt; ++ c2h_id_filter ccx_id_filter = rtw_hal_c2h_id_filter_ccx(adapter); ++ ++ evtpriv->c2h_wk_alive = _TRUE; ++ ++ while (!rtw_cbuf_empty(evtpriv->c2h_queue)) { ++ if ((c2h_evt = (struct c2h_evt_hdr *)rtw_cbuf_pop(evtpriv->c2h_queue)) != NULL) { ++ /* This C2H event is read, clear it */ ++ c2h_evt_clear(adapter); ++ } else if ((c2h_evt = (struct c2h_evt_hdr *)rtw_malloc(16)) != NULL) { ++ /* This C2H event is not read, read & clear now */ ++ if (c2h_evt_read(adapter, (u8*)c2h_evt) != _SUCCESS) ++ continue; ++ } ++ ++ /* Special pointer to trigger c2h_evt_clear only */ ++ if ((void *)c2h_evt == (void *)evtpriv) ++ continue; ++ ++ if (!c2h_evt_exist(c2h_evt)) { ++ rtw_mfree((u8*)c2h_evt, 16); ++ continue; ++ } ++ ++ if (ccx_id_filter(c2h_evt->id) == _TRUE) { ++ /* Handle CCX report here */ ++ rtw_hal_c2h_handler(adapter, c2h_evt); ++ rtw_mfree((u8*)c2h_evt, 16); ++ } else { ++ /* Enqueue into cmd_thread for others */ ++ rtw_c2h_wk_cmd(adapter, (u8 *)c2h_evt); ++ } ++ } ++ ++ evtpriv->c2h_wk_alive = _FALSE; ++} ++#endif ++ ++u8 rtw_drvextra_cmd_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct drvextra_cmd_parm *pdrvextra_cmd; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ pdrvextra_cmd = (struct drvextra_cmd_parm*)pbuf; ++ ++ switch(pdrvextra_cmd->ec_id) ++ { ++ case DYNAMIC_CHK_WK_CID: ++ dynamic_chk_wk_hdl(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size); ++ break; ++ case POWER_SAVING_CTRL_WK_CID: ++ power_saving_wk_hdl(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size); ++ break; ++#ifdef CONFIG_LPS ++ case LPS_CTRL_WK_CID: ++ lps_ctrl_wk_hdl(padapter, (u8)pdrvextra_cmd->type_size); ++ break; ++#endif ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ case ANT_SELECT_WK_CID: ++ antenna_select_wk_hdl(padapter, pdrvextra_cmd->type_size); ++ break; ++#endif ++#ifdef CONFIG_P2P_PS ++ case P2P_PS_WK_CID: ++ p2p_ps_wk_hdl(padapter, pdrvextra_cmd->type_size); ++ break; ++#endif // CONFIG_P2P_PS ++ case P2P_PROTO_WK_CID: ++ // Commented by Albert 2011/07/01 ++ // I used the type_size as the type command ++ p2p_protocol_wk_hdl( padapter, pdrvextra_cmd->type_size ); ++ break; ++#ifdef CONFIG_AP_MODE ++ case CHECK_HIQ_WK_CID: ++ rtw_chk_hi_queue_hdl(padapter); ++ break; ++#endif //CONFIG_AP_MODE ++#ifdef CONFIG_INTEL_WIDI ++ case INTEl_WIDI_WK_CID: ++ intel_widi_wk_hdl(padapter, pdrvextra_cmd->type_size, pdrvextra_cmd->pbuf); ++ break; ++#endif //CONFIG_INTEL_WIDI ++ //add for CONFIG_IEEE80211W, none 11w can use it ++ case RESET_SECURITYPRIV: ++ reset_securitypriv_hdl(padapter); ++ break; ++ case FREE_ASSOC_RESOURCES: ++ free_assoc_resources_hdl(padapter); ++ break; ++ case C2H_WK_CID: ++ c2h_evt_hdl(padapter, (struct c2h_evt_hdr *)pdrvextra_cmd->pbuf, NULL); ++ break; ++ ++ default: ++ break; ++ } ++ ++ ++ if(pdrvextra_cmd->pbuf && pdrvextra_cmd->type_size>0) ++ { ++ rtw_mfree(pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size); ++ } ++ ++ ++ return H2C_SUCCESS; ++ ++} ++ ++void rtw_survey_cmd_callback(_adapter* padapter , struct cmd_obj *pcmd) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ if(pcmd->res == H2C_DROPPED) ++ { ++ //TODO: cancel timer and do timeout handler directly... ++ //need to make timeout handlerOS independent ++ _set_timer(&pmlmepriv->scan_to_timer, 1); ++ } ++ else if (pcmd->res != H2C_SUCCESS) { ++ _set_timer(&pmlmepriv->scan_to_timer, 1); ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ********Error: MgntActrtw_set_802_11_bssid_LIST_SCAN Fail ************\n\n.")); ++ } ++ ++ // free cmd ++ rtw_free_cmd_obj(pcmd); ++ ++_func_exit_; ++} ++void rtw_disassoc_cmd_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ if (pcmd->res != H2C_SUCCESS) ++ { ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ set_fwstate(pmlmepriv, _FW_LINKED); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ***Error: disconnect_cmd_callback Fail ***\n.")); ++ ++ goto exit; ++ } ++#ifdef CONFIG_BR_EXT ++ else //clear bridge database ++ nat25_db_cleanup(padapter); ++#endif //CONFIG_BR_EXT ++ ++ // free cmd ++ rtw_free_cmd_obj(pcmd); ++ ++exit: ++ ++_func_exit_; ++} ++ ++ ++void rtw_joinbss_cmd_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ if(pcmd->res == H2C_DROPPED) ++ { ++ //TODO: cancel timer and do timeout handler directly... ++ //need to make timeout handlerOS independent ++ _set_timer(&pmlmepriv->assoc_timer, 1); ++ } ++ else if(pcmd->res != H2C_SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("********Error:rtw_select_and_join_from_scanned_queue Wait Sema Fail ************\n")); ++ _set_timer(&pmlmepriv->assoc_timer, 1); ++ } ++ ++ rtw_free_cmd_obj(pcmd); ++ ++_func_exit_; ++} ++ ++void rtw_createbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd) ++{ ++ _irqL irqL; ++ u8 timer_cancelled; ++ struct sta_info *psta = NULL; ++ struct wlan_network *pwlan = NULL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX *)pcmd->parmbuf; ++ struct wlan_network *tgt_network = &(pmlmepriv->cur_network); ++ ++_func_enter_; ++ ++ if((pcmd->res != H2C_SUCCESS)) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ********Error: rtw_createbss_cmd_callback Fail ************\n\n.")); ++ _set_timer(&pmlmepriv->assoc_timer, 1 ); ++ } ++ ++ _cancel_timer(&pmlmepriv->assoc_timer, &timer_cancelled); ++ ++#ifdef CONFIG_FW_MLMLE ++ //endian_convert ++ pnetwork->Length = le32_to_cpu(pnetwork->Length); ++ pnetwork->Ssid.SsidLength = le32_to_cpu(pnetwork->Ssid.SsidLength); ++ pnetwork->Privacy =le32_to_cpu(pnetwork->Privacy); ++ pnetwork->Rssi = le32_to_cpu(pnetwork->Rssi); ++ pnetwork->NetworkTypeInUse =le32_to_cpu(pnetwork->NetworkTypeInUse); ++ pnetwork->Configuration.ATIMWindow = le32_to_cpu(pnetwork->Configuration.ATIMWindow); ++ //pnetwork->Configuration.BeaconPeriod = le32_to_cpu(pnetwork->Configuration.BeaconPeriod); ++ pnetwork->Configuration.DSConfig =le32_to_cpu(pnetwork->Configuration.DSConfig); ++ pnetwork->Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->Configuration.FHConfig.DwellTime); ++ pnetwork->Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->Configuration.FHConfig.HopPattern); ++ pnetwork->Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->Configuration.FHConfig.HopSet); ++ pnetwork->Configuration.FHConfig.Length=le32_to_cpu(pnetwork->Configuration.FHConfig.Length); ++ pnetwork->Configuration.Length = le32_to_cpu(pnetwork->Configuration.Length); ++ pnetwork->InfrastructureMode = le32_to_cpu(pnetwork->InfrastructureMode); ++ pnetwork->IELength = le32_to_cpu(pnetwork->IELength); ++#endif ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) ) ++ { ++ psta = rtw_get_stainfo(&padapter->stapriv, pnetwork->MacAddress); ++ if(!psta) ++ { ++ psta = rtw_alloc_stainfo(&padapter->stapriv, pnetwork->MacAddress); ++ if (psta == NULL) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nCan't alloc sta_info when createbss_cmd_callback\n")); ++ goto createbss_cmd_fail ; ++ } ++ } ++ ++ rtw_indicate_connect( padapter); ++ } ++ else ++ { ++ _irqL irqL; ++ ++ pwlan = _rtw_alloc_network(pmlmepriv); ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ if ( pwlan == NULL) ++ { ++ pwlan = rtw_get_oldest_wlan_network(&pmlmepriv->scanned_queue); ++ if( pwlan == NULL) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n Error: can't get pwlan in rtw_joinbss_event_callback \n")); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto createbss_cmd_fail; ++ } ++ pwlan->last_scanned = rtw_get_current_time(); ++ } ++ else ++ { ++ rtw_list_insert_tail(&(pwlan->list), &pmlmepriv->scanned_queue.queue); ++ } ++ ++ pnetwork->Length = get_WLAN_BSSID_EX_sz(pnetwork); ++ _rtw_memcpy(&(pwlan->network), pnetwork, pnetwork->Length); ++ //pwlan->fixed = _TRUE; ++ ++ //rtw_list_insert_tail(&(pwlan->list), &pmlmepriv->scanned_queue.queue); ++ ++ // copy pdev_network information to pmlmepriv->cur_network ++ _rtw_memcpy(&tgt_network->network, pnetwork, (get_WLAN_BSSID_EX_sz(pnetwork))); ++ ++ // reset DSConfig ++ //tgt_network->network.Configuration.DSConfig = (u32)rtw_ch2freq(pnetwork->Configuration.DSConfig); ++ ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++#if 0 ++ if((pmlmepriv->fw_state) & WIFI_AP_STATE) ++ { ++ psta = rtw_alloc_stainfo(&padapter->stapriv, pnetwork->MacAddress); ++ ++ if (psta == NULL) { // for AP Mode & Adhoc Master Mode ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nCan't alloc sta_info when createbss_cmd_callback\n")); ++ goto createbss_cmd_fail ; ++ } ++ ++ rtw_indicate_connect( padapter); ++ } ++ else { ++ ++ //rtw_indicate_disconnect(dev); ++ } ++#endif ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ // we will set _FW_LINKED when there is one more sat to join us (rtw_stassoc_event_callback) ++ ++ } ++ ++createbss_cmd_fail: ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ rtw_free_cmd_obj(pcmd); ++ ++_func_exit_; ++ ++} ++ ++ ++ ++void rtw_setstaKey_cmdrsp_callback(_adapter* padapter , struct cmd_obj *pcmd) ++{ ++ ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ struct set_stakey_rsp* psetstakey_rsp = (struct set_stakey_rsp*) (pcmd->rsp); ++ struct sta_info* psta = rtw_get_stainfo(pstapriv, psetstakey_rsp->addr); ++ ++_func_enter_; ++ ++ if(psta==NULL) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nERROR: rtw_setstaKey_cmdrsp_callback => can't get sta_info \n\n")); ++ goto exit; ++ } ++ ++ //psta->aid = psta->mac_id = psetstakey_rsp->keyid; //CAM_ID(CAM_ENTRY) ++ ++exit: ++ ++ rtw_free_cmd_obj(pcmd); ++ ++_func_exit_; ++ ++} ++void rtw_setassocsta_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++ _irqL irqL; ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct set_assocsta_parm* passocsta_parm = (struct set_assocsta_parm*)(pcmd->parmbuf); ++ struct set_assocsta_rsp* passocsta_rsp = (struct set_assocsta_rsp*) (pcmd->rsp); ++ struct sta_info* psta = rtw_get_stainfo(pstapriv, passocsta_parm->addr); ++ ++_func_enter_; ++ ++ if(psta==NULL) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nERROR: setassocsta_cmdrsp_callbac => can't get sta_info \n\n")); ++ goto exit; ++ } ++ ++ psta->aid = psta->mac_id = passocsta_rsp->cam_id; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) && (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE)) ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++ set_fwstate(pmlmepriv, _FW_LINKED); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++exit: ++ rtw_free_cmd_obj(pcmd); ++ ++_func_exit_; ++} ++ ++void rtw_getrttbl_cmd_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd); ++void rtw_getrttbl_cmd_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd) ++{ ++_func_enter_; ++ ++ rtw_free_cmd_obj(pcmd); ++#ifdef CONFIG_MP_INCLUDED ++ padapter->mppriv.workparam.bcompleted=_TRUE; ++#endif ++ ++_func_exit_; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_debug.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_debug.c +new file mode 100644 +index 000000000000..2268c1aafd86 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_debug.c +@@ -0,0 +1,1336 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_DEBUG_C_ ++ ++ ++#include ++#include <../hal/dm.h> ++ ++//#ifdef CONFIG_DEBUG_RTL871X ++ ++ u32 GlobalDebugLevel = _drv_err_; ++ ++ u64 GlobalDebugComponents = \ ++ _module_rtl871x_xmit_c_ | ++ _module_xmit_osdep_c_ | ++ _module_rtl871x_recv_c_ | ++ _module_recv_osdep_c_ | ++ _module_rtl871x_mlme_c_ | ++ _module_mlme_osdep_c_ | ++ _module_rtl871x_sta_mgt_c_ | ++ _module_rtl871x_cmd_c_ | ++ _module_cmd_osdep_c_ | ++ _module_rtl871x_io_c_ | ++ _module_io_osdep_c_ | ++ _module_os_intfs_c_| ++ _module_rtl871x_security_c_| ++ _module_rtl871x_eeprom_c_| ++ _module_hal_init_c_| ++ _module_hci_hal_init_c_| ++ _module_rtl871x_ioctl_c_| ++ _module_rtl871x_ioctl_set_c_| ++ _module_rtl871x_ioctl_query_c_| ++ _module_rtl871x_pwrctrl_c_| ++ _module_hci_intfs_c_| ++ _module_hci_ops_c_| ++ _module_hci_ops_os_c_| ++ _module_rtl871x_ioctl_os_c| ++ _module_rtl8712_cmd_c_| ++ _module_hal_xmit_c_| ++ _module_rtl8712_recv_c_ | ++ _module_mp_ | ++ _module_efuse_; ++ ++//#endif ++ ++#ifdef CONFIG_PROC_DEBUG ++#include ++ ++int proc_get_drv_version(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "%s\n", DRIVERVERSION); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_log_level(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, ++ "log_level:%d\n", ++ GlobalDebugLevel ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_log_level(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ u32 is_signal_dbg; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d ", &is_signal_dbg); ++ ++ if( is_signal_dbg >= 0 && is_signal_dbg < 10 ) ++ { ++ GlobalDebugLevel= is_signal_dbg; ++ printk("%d\n", GlobalDebugLevel); ++ } ++ } ++ ++ return count; ++ ++} ++ ++#ifdef DBG_MEM_ALLOC ++int proc_get_mstat(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ int len = 0; ++ ++ len += _rtw_mstat_dump(page+len, count-len); ++ *eof = 1; ++ ++ return len; ++} ++#endif /* DBG_MEM_ALLOC */ ++ ++int proc_get_write_reg(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ *eof = 1; ++ return 0; ++} ++ ++int proc_set_write_reg(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ u32 addr, val, len; ++ ++ if (count < 3) ++ { ++ DBG_871X("argument size is less than 3\n"); ++ return -EFAULT; ++ } ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%x %x %x", &addr, &val, &len); ++ ++ if (num != 3) { ++ DBG_871X("invalid write_reg parameter!\n"); ++ return count; ++ } ++ ++ switch(len) ++ { ++ case 1: ++ rtw_write8(padapter, addr, (u8)val); ++ break; ++ case 2: ++ rtw_write16(padapter, addr, (u16)val); ++ break; ++ case 4: ++ rtw_write32(padapter, addr, val); ++ break; ++ default: ++ DBG_871X("error write length=%d", len); ++ break; ++ } ++ ++ } ++ ++ return count; ++ ++} ++ ++static u32 proc_get_read_addr=0xeeeeeeee; ++static u32 proc_get_read_len=0x4; ++ ++int proc_get_read_reg(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ int len = 0; ++ ++ if(proc_get_read_addr==0xeeeeeeee) ++ { ++ *eof = 1; ++ return len; ++ } ++ ++ switch(proc_get_read_len) ++ { ++ case 1: ++ len += snprintf(page + len, count - len, "rtw_read8(0x%x)=0x%x\n", proc_get_read_addr, rtw_read8(padapter, proc_get_read_addr)); ++ break; ++ case 2: ++ len += snprintf(page + len, count - len, "rtw_read16(0x%x)=0x%x\n", proc_get_read_addr, rtw_read16(padapter, proc_get_read_addr)); ++ break; ++ case 4: ++ len += snprintf(page + len, count - len, "rtw_read32(0x%x)=0x%x\n", proc_get_read_addr, rtw_read32(padapter, proc_get_read_addr)); ++ break; ++ default: ++ len += snprintf(page + len, count - len, "error read length=%d\n", proc_get_read_len); ++ break; ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_set_read_reg(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ char tmp[16]; ++ u32 addr, len; ++ ++ if (count < 2) ++ { ++ DBG_871X("argument size is less than 2\n"); ++ return -EFAULT; ++ } ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%x %x", &addr, &len); ++ ++ if (num != 2) { ++ DBG_871X("invalid read_reg parameter!\n"); ++ return count; ++ } ++ ++ proc_get_read_addr = addr; ++ ++ proc_get_read_len = len; ++ } ++ ++ return count; ++ ++} ++ ++int proc_get_fwstate(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "fwstate=0x%x\n", get_fwstate(pmlmepriv)); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_sec_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", ++ psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm, ++ psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_mlmext_state(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "pmlmeinfo->state=0x%x\n", pmlmeinfo->state); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_qos_option(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "qos_option=%d\n", pmlmepriv->qospriv.qos_option); ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_ht_option(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "ht_option=%d\n", pmlmepriv->htpriv.ht_option); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_rf_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "cur_ch=%d, cur_bw=%d, cur_ch_offet=%d\n" ++ "oper_ch=%d, oper_bw=%d, oper_ch_offet=%d\n", ++ pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset, ++ rtw_get_oper_ch(padapter), rtw_get_oper_bw(padapter), rtw_get_oper_choffset(padapter)); ++ *eof = 1; ++ ++ return len; ++} ++ ++int proc_get_ap_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct sta_info *psta; ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ int len = 0; ++ ++ psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress); ++ if(psta) ++ { ++ int i; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ ++ len += snprintf(page + len, count - len, "SSID=%s\n", cur_network->network.Ssid.Ssid); ++ len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr)); ++ len += snprintf(page + len, count - len, "cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset); ++ len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self); ++ len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate); ++ len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid); ++ len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi); ++ len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable); ++ len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap); ++ ++ for(i=0;i<16;i++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ if(preorder_ctrl->enable) ++ { ++ len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq); ++ } ++ } ++ ++ } ++ else ++ { ++ len += snprintf(page + len, count - len, "can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress)); ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_adapter_state(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "bSurpriseRemoved=%d, bDriverStopped=%d\n", ++ padapter->bSurpriseRemoved, padapter->bDriverStopped); ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_trx_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ int i; ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); ++ struct hw_xmit *phwxmit; ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "free_xmitbuf_cnt=%d, free_xmitframe_cnt=%d" ++ ", free_ext_xmitbuf_cnt=%d, free_xframe_ext_cnt=%d" ++ ", free_recvframe_cnt=%d\n", ++ pxmitpriv->free_xmitbuf_cnt, pxmitpriv->free_xmitframe_cnt, ++ pxmitpriv->free_xmit_extbuf_cnt, pxmitpriv->free_xframe_ext_cnt, ++ precvpriv->free_recvframe_cnt); ++#ifdef CONFIG_USB_HCI ++ len += snprintf(page + len, count - len, "rx_urb_pending_cnt=%d\n", precvpriv->rx_pending_cnt); ++#endif ++ ++ len += snprintf(page + len, count - len, "recvbuf_skb_alloc_fail_cnt=%d\n", precvpriv->recvbuf_skb_alloc_fail_cnt); ++ len += snprintf(page + len, count - len, "recvbuf_null_cnt=%d\n", precvpriv->recvbuf_null_cnt); ++ len += snprintf(page + len, count - len, "read_port_complete_EINPROGRESS_cnt=%d\n", precvpriv->read_port_complete_EINPROGRESS_cnt); ++ len += snprintf(page + len, count - len, "read_port_complete_other_urb_err_cnt=%d\n", precvpriv->read_port_complete_other_urb_err_cnt); ++ len += snprintf(page + len, count - len, "hw_init_completed=%d\n", padapter->hw_init_completed); ++#ifdef CONFIG_USB_HCI ++ len += snprintf(page + len, count - len, "continual_urb_error=%d\n", atomic_read(&pdvobj->continual_urb_error)); ++#endif ++ ++ for(i = 0; i < 4; i++) ++ { ++ phwxmit = pxmitpriv->hwxmits + i; ++ len += snprintf(page + len, count - len, "%d, hwq.accnt=%d\n", i, phwxmit->accnt); ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++ ++ ++int proc_get_mac_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= MAC REG =======\n"); ++ ++ for(i=0x0;i<0x300;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_mac_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= MAC REG =======\n"); ++ memset(page, 0, count); ++ for(i=0x300;i<0x600;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_mac_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= MAC REG =======\n"); ++ ++ for(i=0x600;i<0x800;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_get_bb_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= BB REG =======\n"); ++ for(i=0x800;i<0xB00;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_bb_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= BB REG =======\n"); ++ for(i=0xB00;i<0xE00;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_bb_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1; ++ ++ len += snprintf(page + len, count - len, "\n======= BB REG =======\n"); ++ for(i=0xE00;i<0x1000;i+=4) ++ { ++ if(j%4==1) len += snprintf(page + len, count - len,"0x%02x",i); ++ len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) len += snprintf(page + len, count - len,"\n"); ++ } ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_rf_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1,path; ++ u32 value; ++ ++ len += snprintf(page + len, count - len, "\n======= RF REG =======\n"); ++ path = 1; ++ len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path); ++ for(i=0;i<0xC0;i++) ++ { ++ //value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord); ++ value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff); ++ if(j%4==1) len += snprintf(page + len, count - len, "0x%02x ",i); ++ len += snprintf(page + len, count - len, " 0x%08x ",value); ++ if((j++)%4==0) len += snprintf(page + len, count - len, "\n"); ++ } ++ ++ *eof = 1; ++ return len; ++} ++ ++ ++int proc_get_rf_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1,path; ++ u32 value; ++ ++ len += snprintf(page + len, count - len, "\n======= RF REG =======\n"); ++ path = 1; ++ len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path); ++ for(i=0xC0;i<0x100;i++) ++ { ++ //value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord); ++ value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff); ++ if(j%4==1) len += snprintf(page + len, count - len, "0x%02x ",i); ++ len += snprintf(page + len, count - len, " 0x%08x ",value); ++ if((j++)%4==0) len += snprintf(page + len, count - len, "\n"); ++ } ++ *eof = 1; ++ return len; ++} ++ ++ ++int proc_get_rf_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1,path; ++ u32 value; ++ ++ len += snprintf(page + len, count - len, "\n======= RF REG =======\n"); ++ path = 2; ++ len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path); ++ for(i=0;i<0xC0;i++) ++ { ++ //value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord); ++ value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff); ++ if(j%4==1) len += snprintf(page + len, count - len, "0x%02x ",i); ++ len += snprintf(page + len, count - len, " 0x%08x ",value); ++ if((j++)%4==0) len += snprintf(page + len, count - len, "\n"); ++ } ++ ++ *eof = 1; ++ return len; ++} ++ ++ ++int proc_get_rf_reg_dump4(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ int i,j=1,path; ++ u32 value; ++ ++ len += snprintf(page + len, count - len, "\n======= RF REG =======\n"); ++ path = 2; ++ len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path); ++ for(i=0xC0;i<0x100;i++) ++ { ++ //value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord); ++ value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff); ++ if(j%4==1) len += snprintf(page + len, count - len, "0x%02x ",i); ++ len += snprintf(page + len, count - len, " 0x%08x ",value); ++ if((j++)%4==0) len += snprintf(page + len, count - len, "\n"); ++ } ++ *eof = 1; ++ return len; ++} ++ ++ ++ ++int proc_get_rx_signal(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, ++ "rssi:%d\n" ++ "rxpwdb:%d\n" ++ "signal_strength:%u\n" ++ "signal_qual:%u\n" ++ "noise:%u\n", ++ padapter->recvpriv.rssi, ++ padapter->recvpriv.rxpwdb, ++ padapter->recvpriv.signal_strength, ++ padapter->recvpriv.signal_qual, ++ padapter->recvpriv.noise ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_rx_signal(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ u32 is_signal_dbg, signal_strength; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%u %u", &is_signal_dbg, &signal_strength); ++ ++ is_signal_dbg = is_signal_dbg==0?0:1; ++ ++ if(is_signal_dbg && num!=2) ++ return count; ++ ++ signal_strength = signal_strength>100?100:signal_strength; ++ signal_strength = signal_strength<0?0:signal_strength; ++ ++ padapter->recvpriv.is_signal_dbg = is_signal_dbg; ++ padapter->recvpriv.signal_strength_dbg=signal_strength; ++ ++ if(is_signal_dbg) ++ DBG_871X("set %s %u\n", "DBG_SIGNAL_STRENGTH", signal_strength); ++ else ++ DBG_871X("set %s\n", "HW_SIGNAL_STRENGTH"); ++ ++ } ++ ++ return count; ++ ++} ++ ++int proc_get_ht_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ int len = 0; ++ ++ if(pregpriv) ++ len += snprintf(page + len, count - len, ++ "%d\n", ++ pregpriv->ht_enable ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_ht_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ char tmp[32]; ++ u32 mode; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d ", &mode); ++ ++ if( pregpriv && mode >= 0 && mode < 2 ) ++ { ++ pregpriv->ht_enable= mode; ++ printk("ht_enable=%d\n", pregpriv->ht_enable); ++ } ++ } ++ ++ return count; ++ ++} ++ ++ ++int proc_get_cbw40_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ int len = 0; ++ ++ if(pregpriv) ++ len += snprintf(page + len, count - len, ++ "%d\n", ++ pregpriv->cbw40_enable ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_cbw40_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ char tmp[32]; ++ u32 mode; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d ", &mode); ++ ++ if( pregpriv && mode >= 0 && mode < 2 ) ++ { ++ pregpriv->cbw40_enable= mode; ++ printk("cbw40_enable=%d\n", mode); ++ } ++ } ++ ++ return count; ++ ++} ++ ++int proc_get_ampdu_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ int len = 0; ++ ++ if(pregpriv) ++ len += snprintf(page + len, count - len, ++ "%d\n", ++ pregpriv->ampdu_enable ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_ampdu_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ char tmp[32]; ++ u32 mode; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d ", &mode); ++ ++ if( pregpriv && mode >= 0 && mode < 3 ) ++ { ++ pregpriv->ampdu_enable= mode; ++ printk("ampdu_enable=%d\n", mode); ++ } ++ } ++ ++ return count; ++ ++} ++ ++ ++int proc_get_two_path_rssi(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ int len = 0; ++ ++ if(padapter) ++ len += snprintf(page + len, count - len, ++ "%d %d\n", ++ padapter->recvpriv.RxRssi[0], ++ padapter->recvpriv.RxRssi[1] ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_rx_stbc(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ int len = 0; ++ ++ if(pregpriv) ++ len += snprintf(page + len, count - len, ++ "%d\n", ++ pregpriv->rx_stbc ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_rx_stbc(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ char tmp[32]; ++ u32 mode; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d ", &mode); ++ ++ if( pregpriv && (mode == 0 || mode == 1|| mode == 2|| mode == 3)) ++ { ++ pregpriv->rx_stbc= mode; ++ printk("rx_stbc=%d\n", mode); ++ } ++ } ++ ++ return count; ++ ++} ++ ++int proc_get_vid(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u16 VID=0; ++ int len = 0; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_VID, (u8 *)&VID); ++ len += snprintf(page + len, count - len, ++ "%04x\n", ++ VID ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_pid(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u16 PID=0; ++ int len = 0; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_PID, (u8 *)&PID); ++ len += snprintf(page + len, count - len, ++ "%04x\n", ++ PID ++ ); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_get_rssi_disp(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ *eof = 1; ++ return 0; ++} ++ ++int proc_set_rssi_disp(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ u32 enable=0; ++ ++ if (count < 1) ++ { ++ DBG_8192C("argument size is less than 1\n"); ++ return -EFAULT; ++ } ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%x", &enable); ++ ++ if (num != 1) { ++ DBG_8192C("invalid set_rssi_disp parameter!\n"); ++ return count; ++ } ++ ++ if(enable) ++ { ++ DBG_8192C("Turn On Rx RSSI Display Function\n"); ++ padapter->bRxRSSIDisplay = enable ; ++ } ++ else ++ { ++ DBG_8192C("Turn Off Rx RSSI Display Function\n"); ++ padapter->bRxRSSIDisplay = 0 ; ++ } ++ ++ } ++ ++ return count; ++ ++} ++ ++ ++#ifdef CONFIG_AP_MODE ++ ++int proc_get_all_sta_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ _irqL irqL; ++ struct sta_info *psta; ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ int i, j; ++ _list *plist, *phead; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ int len = 0; ++ ++ ++ len += snprintf(page + len, count - len, "sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap); ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(i=0; i< NUM_STA; i++) ++ { ++ phead = &(pstapriv->sta_hash[i]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ plist = get_next(plist); ++ ++ //if(extra_arg == psta->aid) ++ { ++ len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr)); ++ len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self); ++ len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate); ++ len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid); ++ len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi); ++ len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable); ++ len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap); ++ len += snprintf(page + len, count - len, "sleepq_len=%d\n", psta->sleepq_len); ++ len += snprintf(page + len, count - len, "capability=0x%x\n", psta->capability); ++ len += snprintf(page + len, count - len, "flags=0x%x\n", psta->flags); ++ len += snprintf(page + len, count - len, "wpa_psk=0x%x\n", psta->wpa_psk); ++ len += snprintf(page + len, count - len, "wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher); ++ len += snprintf(page + len, count - len, "wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher); ++ len += snprintf(page + len, count - len, "qos_info=0x%x\n", psta->qos_info); ++ len += snprintf(page + len, count - len, "dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy); ++ ++ for(j=0;j<16;j++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[j]; ++ if(preorder_ctrl->enable) ++ { ++ len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq); ++ } ++ } ++ ++ } ++ ++ } ++ ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++#include ++extern atomic_t _malloc_cnt;; ++extern atomic_t _malloc_size;; ++ ++int proc_get_malloc_cnt(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ ++ int len = 0; ++ ++ len += snprintf(page + len, count - len, "_malloc_cnt=%d\n", atomic_read(&_malloc_cnt)); ++ len += snprintf(page + len, count - len, "_malloc_size=%d\n", atomic_read(&_malloc_size)); ++ ++ *eof = 1; ++ return len; ++} ++#endif /* DBG_MEMORY_LEAK */ ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++int proc_get_best_channel(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ int len = 0; ++ u32 i, best_channel_24G = 1, best_channel_5G = 36, index_24G = 0, index_5G = 0; ++ ++ for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) { ++ if ( pmlmeext->channel_set[i].ChannelNum == 1) ++ index_24G = i; ++ if ( pmlmeext->channel_set[i].ChannelNum == 36) ++ index_5G = i; ++ } ++ ++ for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) { ++ // 2.4G ++ if ( pmlmeext->channel_set[i].ChannelNum == 6 ) { ++ if ( pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_24G].rx_count ) { ++ index_24G = i; ++ best_channel_24G = pmlmeext->channel_set[i].ChannelNum; ++ } ++ } ++ ++ // 5G ++ if ( pmlmeext->channel_set[i].ChannelNum >= 36 ++ && pmlmeext->channel_set[i].ChannelNum < 140 ) { ++ // Find primary channel ++ if ( (( pmlmeext->channel_set[i].ChannelNum - 36) % 8 == 0) ++ && (pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_5G].rx_count) ) { ++ index_5G = i; ++ best_channel_5G = pmlmeext->channel_set[i].ChannelNum; ++ } ++ } ++ ++ if ( pmlmeext->channel_set[i].ChannelNum >= 149 ++ && pmlmeext->channel_set[i].ChannelNum < 165) { ++ // find primary channel ++ if ( (( pmlmeext->channel_set[i].ChannelNum - 149) % 8 == 0) ++ && (pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_5G].rx_count) ) { ++ index_5G = i; ++ best_channel_5G = pmlmeext->channel_set[i].ChannelNum; ++ } ++ } ++#if 1 // debug ++ len += snprintf(page + len, count - len, "The rx cnt of channel %3d = %d\n", ++ pmlmeext->channel_set[i].ChannelNum, pmlmeext->channel_set[i].rx_count); ++#endif ++ } ++ ++ len += snprintf(page + len, count - len, "best_channel_5G = %d\n", best_channel_5G); ++ len += snprintf(page + len, count - len, "best_channel_24G = %d\n", best_channel_24G); ++ ++ *eof = 1; ++ return len; ++ ++} ++ ++int proc_set_best_channel(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ char tmp[32]; ++ ++ if(count < 1) ++ return -EFAULT; ++ ++ if(buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) ++ { ++ int i; ++ for(i = 0; pmlmeext->channel_set[i].ChannelNum != 0; i++) ++ { ++ pmlmeext->channel_set[i].rx_count = 0; ++ } ++ ++ DBG_871X("set %s\n", "Clean Best Channel Count"); ++ } ++ ++ return count; ++} ++#endif /* CONFIG_FIND_BEST_CHANNEL */ ++ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++#include ++int proc_get_sreset(char *page, char **start, off_t offset, int count, int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ int len = 0; ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_sreset(struct file *file, const char *buffer, unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ s32 trigger_point; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%d", &trigger_point); ++ ++ if (trigger_point == SRESET_TGP_NULL) ++ rtw_hal_sreset_reset(padapter); ++ else ++ sreset_set_trigger_point(padapter, trigger_point); ++ } ++ ++ return count; ++ ++} ++#endif /* DBG_CONFIG_ERROR_DETECT */ ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++int proc_get_dm_adaptivity(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data) ++{ ++ struct net_device *dev = data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ int len = 0; ++ ++ len += dm_adaptivity_get_parm_str(padapter, page, count); ++ ++ *eof = 1; ++ return len; ++} ++ ++int proc_set_dm_adaptivity(struct file *file, const char *buffer, ++ unsigned long count, void *data) ++{ ++ struct net_device *dev = (struct net_device *)data; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ char tmp[32]; ++ u32 TH_L2H_ini; ++ s8 TH_EDCCA_HL_diff; ++ u32 IGI_Base; ++ int ForceEDCCA; ++ u8 AdapEn_RSSI; ++ u8 IGI_LowerBound; ++ ++ if (count < 1) ++ return -EFAULT; ++ ++ if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) { ++ ++ int num = sscanf(tmp, "%x %hhd %x %d %hhu %hhu", ++ &TH_L2H_ini, &TH_EDCCA_HL_diff, &IGI_Base, &ForceEDCCA, &AdapEn_RSSI, &IGI_LowerBound); ++ ++ if (num != 6) ++ return count; ++ ++ dm_adaptivity_set_parm(padapter, (s8)TH_L2H_ini, TH_EDCCA_HL_diff, (s8)IGI_Base, (bool)ForceEDCCA, AdapEn_RSSI, IGI_LowerBound); ++ } ++ ++ return count; ++} ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_eeprom.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_eeprom.c +new file mode 100644 +index 000000000000..c0a6b541bf12 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_eeprom.c +@@ -0,0 +1,422 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_EEPROM_C_ ++ ++#include ++#include ++#include ++ ++void up_clk(_adapter* padapter, u16 *x) ++{ ++_func_enter_; ++ *x = *x | _EESK; ++ rtw_write8(padapter, EE_9346CR, (u8)*x); ++ rtw_udelay_os(CLOCK_RATE); ++ ++_func_exit_; ++ ++} ++ ++void down_clk(_adapter * padapter, u16 *x ) ++{ ++_func_enter_; ++ *x = *x & ~_EESK; ++ rtw_write8(padapter, EE_9346CR, (u8)*x); ++ rtw_udelay_os(CLOCK_RATE); ++_func_exit_; ++} ++ ++void shift_out_bits(_adapter * padapter, u16 data, u16 count) ++{ ++ u16 x,mask; ++_func_enter_; ++ ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ mask = 0x01 << (count - 1); ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ x &= ~(_EEDO | _EEDI); ++ ++ do ++ { ++ x &= ~_EEDI; ++ if(data & mask) ++ x |= _EEDI; ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ rtw_write8(padapter, EE_9346CR, (u8)x); ++ rtw_udelay_os(CLOCK_RATE); ++ up_clk(padapter, &x); ++ down_clk(padapter, &x); ++ mask = mask >> 1; ++ } while(mask); ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ x &= ~_EEDI; ++ rtw_write8(padapter, EE_9346CR, (u8)x); ++out: ++_func_exit_; ++} ++ ++u16 shift_in_bits (_adapter * padapter) ++{ ++ u16 x,d=0,i; ++_func_enter_; ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ x &= ~( _EEDO | _EEDI); ++ d = 0; ++ ++ for(i=0; i<16; i++) ++ { ++ d = d << 1; ++ up_clk(padapter, &x); ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ x &= ~(_EEDI); ++ if(x & _EEDO) ++ d |= 1; ++ ++ down_clk(padapter, &x); ++ } ++out: ++_func_exit_; ++ ++ return d; ++} ++ ++void standby(_adapter * padapter ) ++{ ++ u8 x; ++_func_enter_; ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ x &= ~(_EECS | _EESK); ++ rtw_write8(padapter, EE_9346CR,x); ++ ++ rtw_udelay_os(CLOCK_RATE); ++ x |= _EECS; ++ rtw_write8(padapter, EE_9346CR, x); ++ rtw_udelay_os(CLOCK_RATE); ++_func_exit_; ++} ++ ++u16 wait_eeprom_cmd_done(_adapter* padapter) ++{ ++ u8 x; ++ u16 i,res=_FALSE; ++_func_enter_; ++ standby(padapter ); ++ for (i=0; i<200; i++) ++ { ++ x = rtw_read8(padapter, EE_9346CR); ++ if (x & _EEDO){ ++ res=_TRUE; ++ goto exit; ++ } ++ rtw_udelay_os(CLOCK_RATE); ++ } ++exit: ++_func_exit_; ++ return res; ++} ++ ++void eeprom_clean(_adapter * padapter) ++{ ++ u16 x; ++_func_enter_; ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ x = rtw_read8(padapter, EE_9346CR); ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ x &= ~(_EECS | _EEDI); ++ rtw_write8(padapter, EE_9346CR, (u8)x); ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ up_clk(padapter, &x); ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ down_clk(padapter, &x); ++out: ++_func_exit_; ++} ++ ++void eeprom_write16(_adapter * padapter, u16 reg, u16 data) ++{ ++ u8 x; ++#ifdef CONFIG_RTL8712 ++ u8 tmp8_ori,tmp8_new,tmp8_clk_ori,tmp8_clk_new; ++ tmp8_ori=rtw_read8(padapter, 0x102502f1); ++ tmp8_new=tmp8_ori & 0xf7; ++ if(tmp8_ori != tmp8_new){ ++ rtw_write8(padapter, 0x102502f1, tmp8_new); ++ RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x102502f1=====\n")); ++ } ++ tmp8_clk_ori=rtw_read8(padapter,0x10250003); ++ tmp8_clk_new=tmp8_clk_ori|0x20; ++ if(tmp8_clk_new!=tmp8_clk_ori){ ++ RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n")); ++ rtw_write8(padapter, 0x10250003, tmp8_clk_new); ++ } ++#endif ++_func_enter_; ++ ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ x &= ~(_EEDI | _EEDO | _EESK | _EEM0); ++ x |= _EEM1 | _EECS; ++ rtw_write8(padapter, EE_9346CR, x); ++ ++ shift_out_bits(padapter, EEPROM_EWEN_OPCODE, 5); ++ ++ if(padapter->EepromAddressSize==8) //CF+ and SDIO ++ shift_out_bits(padapter, 0, 6); ++ else //USB ++ shift_out_bits(padapter, 0, 4); ++ ++ standby( padapter); ++ ++// Commented out by rcnjko, 2004.0 ++// // Erase this particular word. Write the erase opcode and register ++// // number in that order. The opcode is 3bits in length; reg is 6 bits long. ++// shift_out_bits(Adapter, EEPROM_ERASE_OPCODE, 3); ++// shift_out_bits(Adapter, reg, Adapter->EepromAddressSize); ++// ++// if (wait_eeprom_cmd_done(Adapter ) == FALSE) ++// { ++// return; ++// } ++ ++ ++ standby(padapter ); ++ ++ // write the new word to the EEPROM ++ ++ // send the write opcode the EEPORM ++ shift_out_bits(padapter, EEPROM_WRITE_OPCODE, 3); ++ ++ // select which word in the EEPROM that we are writing to. ++ shift_out_bits(padapter, reg, padapter->EepromAddressSize); ++ ++ // write the data to the selected EEPROM word. ++ shift_out_bits(padapter, data, 16); ++ ++ if (wait_eeprom_cmd_done(padapter ) == _FALSE) ++ { ++ ++ goto exit; ++ } ++ ++ standby(padapter ); ++ ++ shift_out_bits(padapter, EEPROM_EWDS_OPCODE, 5); ++ shift_out_bits(padapter, reg, 4); ++ ++ eeprom_clean(padapter ); ++exit: ++#ifdef CONFIG_RTL8712 ++ if(tmp8_clk_new!=tmp8_clk_ori) ++ rtw_write8(padapter, 0x10250003, tmp8_clk_ori); ++ if(tmp8_new!=tmp8_ori) ++ rtw_write8(padapter, 0x102502f1, tmp8_ori); ++ ++#endif ++_func_exit_; ++ return; ++} ++ ++u16 eeprom_read16(_adapter * padapter, u16 reg) //ReadEEprom ++{ ++ ++ u16 x; ++ u16 data=0; ++#ifdef CONFIG_RTL8712 ++ u8 tmp8_ori,tmp8_new,tmp8_clk_ori,tmp8_clk_new; ++ tmp8_ori= rtw_read8(padapter, 0x102502f1); ++ tmp8_new = tmp8_ori & 0xf7; ++ if(tmp8_ori != tmp8_new){ ++ rtw_write8(padapter, 0x102502f1, tmp8_new); ++ RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x102502f1=====\n")); ++ } ++ tmp8_clk_ori=rtw_read8(padapter,0x10250003); ++ tmp8_clk_new=tmp8_clk_ori|0x20; ++ if(tmp8_clk_new!=tmp8_clk_ori){ ++ RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n")); ++ rtw_write8(padapter, 0x10250003, tmp8_clk_new); ++ } ++#endif ++_func_enter_; ++ ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ // select EEPROM, reset bits, set _EECS ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ ++ x &= ~(_EEDI | _EEDO | _EESK | _EEM0); ++ x |= _EEM1 | _EECS; ++ rtw_write8(padapter, EE_9346CR, (unsigned char)x); ++ ++ // write the read opcode and register number in that order ++ // The opcode is 3bits in length, reg is 6 bits long ++ shift_out_bits(padapter, EEPROM_READ_OPCODE, 3); ++ shift_out_bits(padapter, reg, padapter->EepromAddressSize); ++ ++ // Now read the data (16 bits) in from the selected EEPROM word ++ data = shift_in_bits(padapter); ++ ++ eeprom_clean(padapter); ++out: ++#ifdef CONFIG_RTL8712 ++ if(tmp8_clk_new!=tmp8_clk_ori) ++ rtw_write8(padapter, 0x10250003, tmp8_clk_ori); ++ if(tmp8_new!=tmp8_ori) ++ rtw_write8(padapter, 0x102502f1, tmp8_ori); ++ ++#endif ++_func_exit_; ++ return data; ++ ++ ++} ++ ++ ++ ++ ++//From even offset ++void eeprom_read_sz(_adapter * padapter, u16 reg, u8* data, u32 sz) ++{ ++ ++ u16 x, data16; ++ u32 i; ++_func_enter_; ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ // select EEPROM, reset bits, set _EECS ++ x = rtw_read8(padapter, EE_9346CR); ++ ++ if(padapter->bSurpriseRemoved==_TRUE){ ++ RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE")); ++ goto out; ++ } ++ ++ x &= ~(_EEDI | _EEDO | _EESK | _EEM0); ++ x |= _EEM1 | _EECS; ++ rtw_write8(padapter, EE_9346CR, (unsigned char)x); ++ ++ // write the read opcode and register number in that order ++ // The opcode is 3bits in length, reg is 6 bits long ++ shift_out_bits(padapter, EEPROM_READ_OPCODE, 3); ++ shift_out_bits(padapter, reg, padapter->EepromAddressSize); ++ ++ ++ for(i=0; i>8; ++ } ++ ++ eeprom_clean(padapter); ++out: ++_func_exit_; ++ ++ ++ ++} ++ ++ ++//addr_off : address offset of the entry in eeprom (not the tuple number of eeprom (reg); that is addr_off !=reg) ++u8 eeprom_read(_adapter * padapter, u32 addr_off, u8 sz, u8* rbuf) ++{ ++ u8 quotient, remainder, addr_2align_odd; ++ u16 reg, stmp , i=0, idx = 0; ++_func_enter_; ++ reg = (u16)(addr_off >> 1); ++ addr_2align_odd = (u8)(addr_off & 0x1); ++ ++ if(addr_2align_odd) //read that start at high part: e.g 1,3,5,7,9,... ++ { ++ stmp = eeprom_read16(padapter, reg); ++ rbuf[idx++] = (u8) ((stmp>>8)&0xff); //return hogh-part of the short ++ reg++; sz--; ++ } ++ ++ quotient = sz >> 1; ++ remainder = sz & 0x1; ++ ++ for( i=0 ; i < quotient; i++) ++ { ++ stmp = eeprom_read16(padapter, reg+i); ++ rbuf[idx++] = (u8) (stmp&0xff); ++ rbuf[idx++] = (u8) ((stmp>>8)&0xff); ++ } ++ ++ reg = reg+i; ++ if(remainder){ //end of read at lower part of short : 0,2,4,6,... ++ stmp = eeprom_read16(padapter, reg); ++ rbuf[idx] = (u8)(stmp & 0xff); ++ } ++_func_exit_; ++ return _TRUE; ++} ++ ++ ++ ++VOID read_eeprom_content(_adapter * padapter) ++{ ++ ++_func_enter_; ++ ++ ++_func_exit_; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c +new file mode 100644 +index 000000000000..cc0b97a433c5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c +@@ -0,0 +1,1914 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _IEEE80211_C ++ ++#include ++#include ++#include ++#include ++#include ++ ++u8 RTW_WPA_OUI_TYPE[] = { 0x00, 0x50, 0xf2, 1 }; ++u16 RTW_WPA_VERSION = 1; ++u8 WPA_AUTH_KEY_MGMT_NONE[] = { 0x00, 0x50, 0xf2, 0 }; ++u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[] = { 0x00, 0x50, 0xf2, 1 }; ++u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[] = { 0x00, 0x50, 0xf2, 2 }; ++u8 WPA_CIPHER_SUITE_NONE[] = { 0x00, 0x50, 0xf2, 0 }; ++u8 WPA_CIPHER_SUITE_WEP40[] = { 0x00, 0x50, 0xf2, 1 }; ++u8 WPA_CIPHER_SUITE_TKIP[] = { 0x00, 0x50, 0xf2, 2 }; ++u8 WPA_CIPHER_SUITE_WRAP[] = { 0x00, 0x50, 0xf2, 3 }; ++u8 WPA_CIPHER_SUITE_CCMP[] = { 0x00, 0x50, 0xf2, 4 }; ++u8 WPA_CIPHER_SUITE_WEP104[] = { 0x00, 0x50, 0xf2, 5 }; ++ ++u16 RSN_VERSION_BSD = 1; ++u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[] = { 0x00, 0x0f, 0xac, 1 }; ++u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[] = { 0x00, 0x0f, 0xac, 2 }; ++u8 RSN_CIPHER_SUITE_NONE[] = { 0x00, 0x0f, 0xac, 0 }; ++u8 RSN_CIPHER_SUITE_WEP40[] = { 0x00, 0x0f, 0xac, 1 }; ++u8 RSN_CIPHER_SUITE_TKIP[] = { 0x00, 0x0f, 0xac, 2 }; ++u8 RSN_CIPHER_SUITE_WRAP[] = { 0x00, 0x0f, 0xac, 3 }; ++u8 RSN_CIPHER_SUITE_CCMP[] = { 0x00, 0x0f, 0xac, 4 }; ++u8 RSN_CIPHER_SUITE_WEP104[] = { 0x00, 0x0f, 0xac, 5 }; ++//----------------------------------------------------------- ++// for adhoc-master to generate ie and provide supported-rate to fw ++//----------------------------------------------------------- ++ ++static u8 WIFI_CCKRATES[] = ++{(IEEE80211_CCK_RATE_1MB | IEEE80211_BASIC_RATE_MASK), ++ (IEEE80211_CCK_RATE_2MB | IEEE80211_BASIC_RATE_MASK), ++ (IEEE80211_CCK_RATE_5MB | IEEE80211_BASIC_RATE_MASK), ++ (IEEE80211_CCK_RATE_11MB | IEEE80211_BASIC_RATE_MASK)}; ++ ++static u8 WIFI_OFDMRATES[] = ++{(IEEE80211_OFDM_RATE_6MB), ++ (IEEE80211_OFDM_RATE_9MB), ++ (IEEE80211_OFDM_RATE_12MB), ++ (IEEE80211_OFDM_RATE_18MB), ++ (IEEE80211_OFDM_RATE_24MB), ++ IEEE80211_OFDM_RATE_36MB, ++ IEEE80211_OFDM_RATE_48MB, ++ IEEE80211_OFDM_RATE_54MB}; ++ ++ ++int rtw_get_bit_value_from_ieee_value(u8 val) ++{ ++ unsigned char dot11_rate_table[]={2,4,11,22,12,18,24,36,48,72,96,108,0}; // last element must be zero!! ++ ++ int i=0; ++ while(dot11_rate_table[i] != 0) { ++ if (dot11_rate_table[i] == val) ++ return BIT(i); ++ i++; ++ } ++ return 0; ++} ++ ++uint rtw_is_cckrates_included(u8 *rate) ++{ ++ u32 i = 0; ++ ++ while(rate[i]!=0) ++ { ++ if ( (((rate[i]) & 0x7f) == 2) || (((rate[i]) & 0x7f) == 4) || ++ (((rate[i]) & 0x7f) == 11) || (((rate[i]) & 0x7f) == 22) ) ++ return _TRUE; ++ i++; ++ } ++ ++ return _FALSE; ++} ++ ++uint rtw_is_cckratesonly_included(u8 *rate) ++{ ++ u32 i = 0; ++ ++ ++ while(rate[i]!=0) ++ { ++ if ( (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) && ++ (((rate[i]) & 0x7f) != 11) && (((rate[i]) & 0x7f) != 22) ) ++ ++ return _FALSE; ++ ++ i++; ++ } ++ ++ return _TRUE; ++ ++} ++ ++int rtw_check_network_type(unsigned char *rate, int ratelen, int channel) ++{ ++ if (channel > 14) ++ { ++ if ((rtw_is_cckrates_included(rate)) == _TRUE) ++ return WIRELESS_INVALID; ++ else ++ return WIRELESS_11A; ++ } ++ else // could be pure B, pure G, or B/G ++ { ++ if ((rtw_is_cckratesonly_included(rate)) == _TRUE) ++ return WIRELESS_11B; ++ else if((rtw_is_cckrates_included(rate)) == _TRUE) ++ return WIRELESS_11BG; ++ else ++ return WIRELESS_11G; ++ } ++ ++} ++ ++u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source, ++ unsigned int *frlen) ++{ ++ _rtw_memcpy((void *)pbuf, (void *)source, len); ++ *frlen = *frlen + len; ++ return (pbuf + len); ++} ++ ++// rtw_set_ie will update frame length ++u8 *rtw_set_ie ++( ++ u8 *pbuf, ++ sint index, ++ uint len, ++ u8 *source, ++ uint *frlen //frame length ++) ++{ ++_func_enter_; ++ *pbuf = (u8)index; ++ ++ *(pbuf + 1) = (u8)len; ++ ++ if (len > 0) ++ _rtw_memcpy((void *)(pbuf + 2), (void *)source, len); ++ ++ *frlen = *frlen + (len + 2); ++ ++ return (pbuf + len + 2); ++_func_exit_; ++} ++ ++inline u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode, ++ u8 new_ch, u8 ch_switch_cnt) ++{ ++ u8 ie_data[3]; ++ ++ ie_data[0] = ch_switch_mode; ++ ie_data[1] = new_ch; ++ ie_data[2] = ch_switch_cnt; ++ return rtw_set_ie(buf, WLAN_EID_CHANNEL_SWITCH, 3, ie_data, buf_len); ++} ++ ++inline u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset) ++{ ++ if (ch_offset == SCN) ++ return HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ else if(ch_offset == SCA) ++ return HAL_PRIME_CHNL_OFFSET_UPPER; ++ else if(ch_offset == SCB) ++ return HAL_PRIME_CHNL_OFFSET_LOWER; ++ ++ return HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++} ++ ++inline u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset) ++{ ++ if (ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) ++ return SCN; ++ else if(ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) ++ return SCB; ++ else if(ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) ++ return SCA; ++ ++ return SCN; ++} ++ ++inline u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len, u8 secondary_ch_offset) ++{ ++ return rtw_set_ie(buf, WLAN_EID_SECONDARY_CHANNEL_OFFSET, 1, &secondary_ch_offset, buf_len); ++} ++ ++inline u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl, ++ u8 flags, u16 reason, u16 precedence) ++{ ++ u8 ie_data[6]; ++ ++ ie_data[0] = ttl; ++ ie_data[1] = flags; ++ RTW_PUT_LE16((u8*)&ie_data[2], reason); ++ RTW_PUT_LE16((u8*)&ie_data[4], precedence); ++ ++ return rtw_set_ie(buf, 0x118, 6, ie_data, buf_len); ++} ++ ++/*---------------------------------------------------------------------------- ++index: the information element id index, limit is the limit for search ++-----------------------------------------------------------------------------*/ ++u8 *rtw_get_ie(u8 *pbuf, sint index, sint *len, sint limit) ++{ ++ sint tmp,i; ++ u8 *p; ++_func_enter_; ++ if (limit < 1){ ++ _func_exit_; ++ return NULL; ++ } ++ ++ p = pbuf; ++ i = 0; ++ *len = 0; ++ while(1) ++ { ++ if (*p == index) ++ { ++ *len = *(p + 1); ++ return (p); ++ } ++ else ++ { ++ tmp = *(p + 1); ++ p += (tmp + 2); ++ i += (tmp + 2); ++ } ++ if (i >= limit) ++ break; ++ } ++_func_exit_; ++ return NULL; ++} ++ ++/** ++ * rtw_get_ie_ex - Search specific IE from a series of IEs ++ * @in_ie: Address of IEs to search ++ * @in_len: Length limit from in_ie ++ * @eid: Element ID to match ++ * @oui: OUI to match ++ * @oui_len: OUI length ++ * @ie: If not NULL and the specific IE is found, the IE will be copied to the buf starting from the specific IE ++ * @ielen: If not NULL and the specific IE is found, will set to the length of the entire IE ++ * ++ * Returns: The address of the specific IE found, or NULL ++ */ ++u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui, u8 oui_len, u8 *ie, uint *ielen) ++{ ++ uint cnt; ++ u8 *target_ie = NULL; ++ ++ ++ if(ielen) ++ *ielen = 0; ++ ++ if(!in_ie || in_len<=0) ++ return target_ie; ++ ++ cnt = 0; ++ ++ while(cnt 12) ++ break; ++ ++ i++; ++ } ++_func_exit_; ++ return i; ++} ++ ++int rtw_generate_ie(struct registry_priv *pregistrypriv) ++{ ++ u8 wireless_mode; ++ int sz = 0, rateLen; ++ WLAN_BSSID_EX* pdev_network = &pregistrypriv->dev_network; ++ u8* ie = pdev_network->IEs; ++ ++_func_enter_; ++ ++ //timestamp will be inserted by hardware ++ sz += 8; ++ ie += sz; ++ ++ //beacon interval : 2bytes ++ *(u16*)ie = cpu_to_le16((u16)pdev_network->Configuration.BeaconPeriod);//BCN_INTERVAL; ++ sz += 2; ++ ie += 2; ++ ++ //capability info ++ *(u16*)ie = 0; ++ ++ *(u16*)ie |= cpu_to_le16(cap_IBSS); ++ ++ if(pregistrypriv->preamble == PREAMBLE_SHORT) ++ *(u16*)ie |= cpu_to_le16(cap_ShortPremble); ++ ++ if (pdev_network->Privacy) ++ *(u16*)ie |= cpu_to_le16(cap_Privacy); ++ ++ sz += 2; ++ ie += 2; ++ ++ //SSID ++ ie = rtw_set_ie(ie, _SSID_IE_, pdev_network->Ssid.SsidLength, pdev_network->Ssid.Ssid, &sz); ++ ++ //supported rates ++ if(pregistrypriv->wireless_mode == WIRELESS_11ABGN) ++ { ++ if(pdev_network->Configuration.DSConfig > 14) ++ wireless_mode = WIRELESS_11A_5N; ++ else ++ wireless_mode = WIRELESS_11BG_24N; ++ } ++ else ++ { ++ wireless_mode = pregistrypriv->wireless_mode; ++ } ++ ++ rtw_set_supported_rate(pdev_network->SupportedRates, wireless_mode) ; ++ ++ rateLen = rtw_get_rateset_len(pdev_network->SupportedRates); ++ ++ if (rateLen > 8) ++ { ++ ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, 8, pdev_network->SupportedRates, &sz); ++ //ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (pdev_network->SupportedRates + 8), &sz); ++ } ++ else ++ { ++ ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, rateLen, pdev_network->SupportedRates, &sz); ++ } ++ ++ //DS parameter set ++ ie = rtw_set_ie(ie, _DSSET_IE_, 1, (u8 *)&(pdev_network->Configuration.DSConfig), &sz); ++ ++ ++ //IBSS Parameter Set ++ ++ ie = rtw_set_ie(ie, _IBSS_PARA_IE_, 2, (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz); ++ ++ if (rateLen > 8) ++ { ++ ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (pdev_network->SupportedRates + 8), &sz); ++ } ++ ++ ++ //HT Cap. ++ if(((pregistrypriv->wireless_mode&WIRELESS_11_5N)||(pregistrypriv->wireless_mode&WIRELESS_11_24N)) ++ && (pregistrypriv->ht_enable==_TRUE)) ++ { ++ //todo: ++ } ++ ++ //pdev_network->IELength = sz; //update IELength ++ ++_func_exit_; ++ ++ //return _SUCCESS; ++ ++ return sz; ++ ++} ++ ++unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit) ++{ ++ int len; ++ u16 val16; ++ unsigned char wpa_oui_type[] = {0x00, 0x50, 0xf2, 0x01}; ++ u8 *pbuf = pie; ++ ++ while(1) ++ { ++ pbuf = rtw_get_ie(pbuf, _WPA_IE_ID_, &len, limit); ++ ++ if (pbuf) { ++ ++ //check if oui matches... ++ if (_rtw_memcmp((pbuf + 2), wpa_oui_type, sizeof (wpa_oui_type)) == _FALSE) { ++ ++ goto check_next_ie; ++ } ++ ++ //check version... ++ _rtw_memcpy((u8 *)&val16, (pbuf + 6), sizeof(val16)); ++ ++ val16 = le16_to_cpu(val16); ++ if (val16 != 0x0001) ++ goto check_next_ie; ++ ++ *wpa_ie_len = *(pbuf + 1); ++ ++ return pbuf; ++ } ++ else { ++ ++ *wpa_ie_len = 0; ++ return NULL; ++ } ++ ++check_next_ie: ++ ++ limit -= (2 + len); ++ ++ if (limit <= 0) ++ break; ++ ++ pbuf += (2 + len); ++ } ++ ++ *wpa_ie_len = 0; ++ ++ return NULL; ++} ++ ++unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit) ++{ ++ ++ return rtw_get_ie(pie, _WPA2_IE_ID_,rsn_ie_len, limit); ++ ++} ++ ++int rtw_get_wpa_cipher_suite(u8 *s) ++{ ++ if (_rtw_memcmp(s, WPA_CIPHER_SUITE_NONE, WPA_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_NONE; ++ if (_rtw_memcmp(s, WPA_CIPHER_SUITE_WEP40, WPA_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_WEP40; ++ if (_rtw_memcmp(s, WPA_CIPHER_SUITE_TKIP, WPA_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_TKIP; ++ if (_rtw_memcmp(s, WPA_CIPHER_SUITE_CCMP, WPA_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_CCMP; ++ if (_rtw_memcmp(s, WPA_CIPHER_SUITE_WEP104, WPA_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_WEP104; ++ ++ return 0; ++} ++ ++int rtw_get_wpa2_cipher_suite(u8 *s) ++{ ++ if (_rtw_memcmp(s, RSN_CIPHER_SUITE_NONE, RSN_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_NONE; ++ if (_rtw_memcmp(s, RSN_CIPHER_SUITE_WEP40, RSN_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_WEP40; ++ if (_rtw_memcmp(s, RSN_CIPHER_SUITE_TKIP, RSN_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_TKIP; ++ if (_rtw_memcmp(s, RSN_CIPHER_SUITE_CCMP, RSN_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_CCMP; ++ if (_rtw_memcmp(s, RSN_CIPHER_SUITE_WEP104, RSN_SELECTOR_LEN) == _TRUE) ++ return WPA_CIPHER_WEP104; ++ ++ return 0; ++} ++ ++ ++int rtw_parse_wpa_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher) ++{ ++ int i, ret=_SUCCESS; ++ int left, count; ++ u8 *pos; ++ ++ if (wpa_ie_len <= 0) { ++ /* No WPA IE - fail silently */ ++ return _FAIL; ++ } ++ ++ ++ if ((*wpa_ie != _WPA_IE_ID_) || (*(wpa_ie+1) != (u8)(wpa_ie_len - 2)) || ++ (_rtw_memcmp(wpa_ie+2, RTW_WPA_OUI_TYPE, WPA_SELECTOR_LEN) != _TRUE) ) ++ { ++ return _FAIL; ++ } ++ ++ pos = wpa_ie; ++ ++ pos += 8; ++ left = wpa_ie_len - 8; ++ ++ ++ //group_cipher ++ if (left >= WPA_SELECTOR_LEN) { ++ ++ *group_cipher = rtw_get_wpa_cipher_suite(pos); ++ ++ pos += WPA_SELECTOR_LEN; ++ left -= WPA_SELECTOR_LEN; ++ ++ } ++ else if (left > 0) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie length mismatch, %u too much", __FUNCTION__, left)); ++ ++ return _FAIL; ++ } ++ ++ ++ //pairwise_cipher ++ if (left >= 2) ++ { ++ //count = le16_to_cpu(*(u16*)pos); ++ count = RTW_GET_LE16(pos); ++ pos += 2; ++ left -= 2; ++ ++ if (count == 0 || left < count * WPA_SELECTOR_LEN) { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie count botch (pairwise), " ++ "count %u left %u", __FUNCTION__, count, left)); ++ return _FAIL; ++ } ++ ++ for (i = 0; i < count; i++) ++ { ++ *pairwise_cipher |= rtw_get_wpa_cipher_suite(pos); ++ ++ pos += WPA_SELECTOR_LEN; ++ left -= WPA_SELECTOR_LEN; ++ } ++ ++ } ++ else if (left == 1) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie too short (for key mgmt)", __FUNCTION__)); ++ return _FAIL; ++ } ++ ++ ++ return ret; ++ ++} ++ ++int rtw_parse_wpa2_ie(u8* rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwise_cipher) ++{ ++ int i, ret=_SUCCESS; ++ int left, count; ++ u8 *pos; ++ ++ if (rsn_ie_len <= 0) { ++ /* No RSN IE - fail silently */ ++ return _FAIL; ++ } ++ ++ ++ if ((*rsn_ie!= _WPA2_IE_ID_) || (*(rsn_ie+1) != (u8)(rsn_ie_len - 2))) ++ { ++ return _FAIL; ++ } ++ ++ pos = rsn_ie; ++ pos += 4; ++ left = rsn_ie_len - 4; ++ ++ //group_cipher ++ if (left >= RSN_SELECTOR_LEN) { ++ ++ *group_cipher = rtw_get_wpa2_cipher_suite(pos); ++ ++ pos += RSN_SELECTOR_LEN; ++ left -= RSN_SELECTOR_LEN; ++ ++ } else if (left > 0) { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie length mismatch, %u too much", __FUNCTION__, left)); ++ return _FAIL; ++ } ++ ++ //pairwise_cipher ++ if (left >= 2) ++ { ++ //count = le16_to_cpu(*(u16*)pos); ++ count = RTW_GET_LE16(pos); ++ pos += 2; ++ left -= 2; ++ ++ if (count == 0 || left < count * RSN_SELECTOR_LEN) { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie count botch (pairwise), " ++ "count %u left %u", __FUNCTION__, count, left)); ++ return _FAIL; ++ } ++ ++ for (i = 0; i < count; i++) ++ { ++ *pairwise_cipher |= rtw_get_wpa2_cipher_suite(pos); ++ ++ pos += RSN_SELECTOR_LEN; ++ left -= RSN_SELECTOR_LEN; ++ } ++ ++ } ++ else if (left == 1) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie too short (for key mgmt)", __FUNCTION__)); ++ ++ return _FAIL; ++ } ++ ++ ++ return ret; ++ ++} ++ ++int rtw_get_sec_ie(u8 *in_ie,uint in_len,u8 *rsn_ie,u16 *rsn_len,u8 *wpa_ie,u16 *wpa_len) ++{ ++ u8 authmode, sec_idx, i; ++ u8 wpa_oui[4]={0x0,0x50,0xf2,0x01}; ++ uint cnt; ++ ++_func_enter_; ++ ++ //Search required WPA or WPA2 IE and copy to sec_ie[ ] ++ ++ cnt = (_TIMESTAMP_ + _BEACON_ITERVAL_ + _CAPABILITY_); ++ ++ sec_idx=0; ++ ++ while(cnt found WPS_IE.....\n"); ++ *wps_ielen = ie_ptr[1]+2; ++ match=_TRUE; ++ } ++ return match; ++} ++ ++/** ++ * rtw_get_wps_ie - Search WPS IE from a series of IEs ++ * @in_ie: Address of IEs to search ++ * @in_len: Length limit from in_ie ++ * @wps_ie: If not NULL and WPS IE is found, WPS IE will be copied to the buf starting from wps_ie ++ * @wps_ielen: If not NULL and WPS IE is found, will set to the length of the entire WPS IE ++ * ++ * Returns: The address of the WPS IE found, or NULL ++ */ ++u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen) ++{ ++ uint cnt; ++ u8 *wpsie_ptr=NULL; ++ u8 eid, wps_oui[4]={0x0,0x50,0xf2,0x04}; ++ ++ if(wps_ielen) ++ *wps_ielen = 0; ++ ++ if(!in_ie || in_len<=0) ++ return wpsie_ptr; ++ ++ cnt = 0; ++ ++ while(cntwpa_ie = pos; ++ elems->wpa_ie_len = elen; ++ break; ++ case WME_OUI_TYPE: /* this is a Wi-Fi WME info. element */ ++ if (elen < 5) { ++ DBG_871X("short WME " ++ "information element ignored " ++ "(len=%lu)\n", ++ (unsigned long) elen); ++ return -1; ++ } ++ switch (pos[4]) { ++ case WME_OUI_SUBTYPE_INFORMATION_ELEMENT: ++ case WME_OUI_SUBTYPE_PARAMETER_ELEMENT: ++ elems->wme = pos; ++ elems->wme_len = elen; ++ break; ++ case WME_OUI_SUBTYPE_TSPEC_ELEMENT: ++ elems->wme_tspec = pos; ++ elems->wme_tspec_len = elen; ++ break; ++ default: ++ DBG_871X("unknown WME " ++ "information element ignored " ++ "(subtype=%d len=%lu)\n", ++ pos[4], (unsigned long) elen); ++ return -1; ++ } ++ break; ++ case 4: ++ /* Wi-Fi Protected Setup (WPS) IE */ ++ elems->wps_ie = pos; ++ elems->wps_ie_len = elen; ++ break; ++ default: ++ DBG_871X("Unknown Microsoft " ++ "information element ignored " ++ "(type=%d len=%lu)\n", ++ pos[3], (unsigned long) elen); ++ return -1; ++ } ++ break; ++ ++ case OUI_BROADCOM: ++ switch (pos[3]) { ++ case VENDOR_HT_CAPAB_OUI_TYPE: ++ elems->vendor_ht_cap = pos; ++ elems->vendor_ht_cap_len = elen; ++ break; ++ default: ++ DBG_871X("Unknown Broadcom " ++ "information element ignored " ++ "(type=%d len=%lu)\n", ++ pos[3], (unsigned long) elen); ++ return -1; ++ } ++ break; ++ ++ default: ++ DBG_871X("unknown vendor specific information " ++ "element ignored (vendor OUI %02x:%02x:%02x " ++ "len=%lu)\n", ++ pos[0], pos[1], pos[2], (unsigned long) elen); ++ return -1; ++ } ++ ++ return 0; ++ ++} ++ ++/** ++ * ieee802_11_parse_elems - Parse information elements in management frames ++ * @start: Pointer to the start of IEs ++ * @len: Length of IE buffer in octets ++ * @elems: Data structure for parsed elements ++ * @show_errors: Whether to show parsing errors in debug log ++ * Returns: Parsing result ++ */ ++ParseRes rtw_ieee802_11_parse_elems(u8 *start, uint len, ++ struct rtw_ieee802_11_elems *elems, ++ int show_errors) ++{ ++ uint left = len; ++ u8 *pos = start; ++ int unknown = 0; ++ ++ _rtw_memset(elems, 0, sizeof(*elems)); ++ ++ while (left >= 2) { ++ u8 id, elen; ++ ++ id = *pos++; ++ elen = *pos++; ++ left -= 2; ++ ++ if (elen > left) { ++ if (show_errors) { ++ DBG_871X("IEEE 802.11 element " ++ "parse failed (id=%d elen=%d " ++ "left=%lu)\n", ++ id, elen, (unsigned long) left); ++ } ++ return ParseFailed; ++ } ++ ++ switch (id) { ++ case WLAN_EID_SSID: ++ elems->ssid = pos; ++ elems->ssid_len = elen; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ elems->supp_rates = pos; ++ elems->supp_rates_len = elen; ++ break; ++ case WLAN_EID_FH_PARAMS: ++ elems->fh_params = pos; ++ elems->fh_params_len = elen; ++ break; ++ case WLAN_EID_DS_PARAMS: ++ elems->ds_params = pos; ++ elems->ds_params_len = elen; ++ break; ++ case WLAN_EID_CF_PARAMS: ++ elems->cf_params = pos; ++ elems->cf_params_len = elen; ++ break; ++ case WLAN_EID_TIM: ++ elems->tim = pos; ++ elems->tim_len = elen; ++ break; ++ case WLAN_EID_IBSS_PARAMS: ++ elems->ibss_params = pos; ++ elems->ibss_params_len = elen; ++ break; ++ case WLAN_EID_CHALLENGE: ++ elems->challenge = pos; ++ elems->challenge_len = elen; ++ break; ++ case WLAN_EID_ERP_INFO: ++ elems->erp_info = pos; ++ elems->erp_info_len = elen; ++ break; ++ case WLAN_EID_EXT_SUPP_RATES: ++ elems->ext_supp_rates = pos; ++ elems->ext_supp_rates_len = elen; ++ break; ++ case WLAN_EID_VENDOR_SPECIFIC: ++ if (rtw_ieee802_11_parse_vendor_specific(pos, elen, ++ elems, ++ show_errors)) ++ unknown++; ++ break; ++ case WLAN_EID_RSN: ++ elems->rsn_ie = pos; ++ elems->rsn_ie_len = elen; ++ break; ++ case WLAN_EID_PWR_CAPABILITY: ++ elems->power_cap = pos; ++ elems->power_cap_len = elen; ++ break; ++ case WLAN_EID_SUPPORTED_CHANNELS: ++ elems->supp_channels = pos; ++ elems->supp_channels_len = elen; ++ break; ++ case WLAN_EID_MOBILITY_DOMAIN: ++ elems->mdie = pos; ++ elems->mdie_len = elen; ++ break; ++ case WLAN_EID_FAST_BSS_TRANSITION: ++ elems->ftie = pos; ++ elems->ftie_len = elen; ++ break; ++ case WLAN_EID_TIMEOUT_INTERVAL: ++ elems->timeout_int = pos; ++ elems->timeout_int_len = elen; ++ break; ++ case WLAN_EID_HT_CAP: ++ elems->ht_capabilities = pos; ++ elems->ht_capabilities_len = elen; ++ break; ++ case WLAN_EID_HT_OPERATION: ++ elems->ht_operation = pos; ++ elems->ht_operation_len = elen; ++ break; ++ default: ++ unknown++; ++ if (!show_errors) ++ break; ++ DBG_871X("IEEE 802.11 element parse " ++ "ignored unknown element (id=%d elen=%d)\n", ++ id, elen); ++ break; ++ } ++ ++ left -= elen; ++ pos += elen; ++ } ++ ++ if (left) ++ return ParseFailed; ++ ++ return unknown ? ParseUnknown : ParseOK; ++ ++} ++ ++static u8 key_char2num(u8 ch); ++static u8 key_char2num(u8 ch) ++{ ++ if((ch>='0')&&(ch<='9')) ++ return ch - '0'; ++ else if ((ch>='a')&&(ch<='f')) ++ return ch - 'a' + 10; ++ else if ((ch>='A')&&(ch<='F')) ++ return ch - 'A' + 10; ++ else ++ return 0xff; ++} ++ ++u8 str_2char2num(u8 hch, u8 lch); ++u8 str_2char2num(u8 hch, u8 lch) ++{ ++ return ((key_char2num(hch) * 10 ) + key_char2num(lch)); ++} ++ ++u8 key_2char2num(u8 hch, u8 lch); ++u8 key_2char2num(u8 hch, u8 lch) ++{ ++ return ((key_char2num(hch) << 4) | key_char2num(lch)); ++} ++ ++u8 convert_ip_addr(u8 hch, u8 mch, u8 lch) ++{ ++ return ((key_char2num(hch) * 100) + (key_char2num(mch) * 10 ) + key_char2num(lch)); ++} ++ ++extern char* rtw_initmac; ++void rtw_macaddr_cfg(u8 *mac_addr) ++{ ++ u8 mac[ETH_ALEN]; ++ if(mac_addr == NULL) return; ++ ++ if ( rtw_initmac ) ++ { // Users specify the mac address ++ int jj,kk; ++ ++ for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ mac[jj] = key_2char2num(rtw_initmac[kk], rtw_initmac[kk+ 1]); ++ } ++ _rtw_memcpy(mac_addr, mac, ETH_ALEN); ++ } ++ else ++ { // Use the mac address stored in the Efuse ++ _rtw_memcpy(mac, mac_addr, ETH_ALEN); ++ } ++ ++ if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) && ++ (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) || ++ ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) && ++ (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0))) ++ { ++ mac[0] = 0x00; ++ mac[1] = 0xe0; ++ mac[2] = 0x4c; ++ mac[3] = 0x87; ++ mac[4] = 0x00; ++ mac[5] = 0x00; ++ // use default mac addresss ++ _rtw_memcpy(mac_addr, mac, ETH_ALEN); ++ DBG_871X("MAC Address from efuse error, assign default one !!!\n"); ++ } ++ ++ DBG_871X("rtw_macaddr_cfg MAC Address = "MAC_FMT"\n", MAC_ARG(mac_addr)); ++} ++ ++void dump_ies(u8 *buf, u32 buf_len) { ++ u8* pos = (u8*)buf; ++ u8 id, len; ++ ++ while(pos-buf<=buf_len){ ++ id = *pos; ++ len = *(pos+1); ++ ++ DBG_871X("%s ID:%u, LEN:%u\n", __FUNCTION__, id, len); ++ #ifdef CONFIG_P2P ++ dump_p2p_ie(pos, len); ++ #endif ++ dump_wps_ie(pos, len); ++ ++ pos+=(2+len); ++ } ++} ++ ++void dump_wps_ie(u8 *ie, u32 ie_len) { ++ u8* pos = (u8*)ie; ++ u16 id; ++ u16 len; ++ ++ u8 *wps_ie; ++ uint wps_ielen; ++ ++ wps_ie = rtw_get_wps_ie(ie, ie_len, NULL, &wps_ielen); ++ if(wps_ie != ie || wps_ielen == 0) ++ return; ++ ++ pos+=6; ++ while(pos-ie < ie_len){ ++ id = RTW_GET_BE16(pos); ++ len = RTW_GET_BE16(pos + 2); ++ ++ DBG_871X("%s ID:0x%04x, LEN:%u\n", __FUNCTION__, id, len); ++ ++ pos+=(4+len); ++ } ++} ++ ++#ifdef CONFIG_P2P ++/** ++ * rtw_get_p2p_merged_len - Get merged ie length from muitiple p2p ies. ++ * @in_ie: Pointer of the first p2p ie ++ * @in_len: Total len of muiltiple p2p ies ++ * Returns: Length of merged p2p ie length ++ */ ++u32 rtw_get_p2p_merged_ies_len(u8 *in_ie, u32 in_len) ++{ ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 OUI[4] = { 0x50, 0x6f, 0x9a, 0x09 }; ++ int i=0; ++ int j=0, len=0; ++ ++ while( i < in_len) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(in_ie+ i); ++ ++ if( pIE->ElementID == _VENDOR_SPECIFIC_IE_ && _rtw_memcmp(pIE->data, OUI, 4) ) ++ { ++ len += pIE->Length-4; // 4 is P2P OUI length, don't count it in this loop ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ return len + 4; // Append P2P OUI length at last. ++} ++ ++/** ++ * rtw_p2p_merge_ies - Merge muitiple p2p ies into one ++ * @in_ie: Pointer of the first p2p ie ++ * @in_len: Total len of muiltiple p2p ies ++ * @merge_ie: Pointer of merged ie ++ * Returns: Length of merged p2p ie ++ */ ++int rtw_p2p_merge_ies(u8 *in_ie, u32 in_len, u8 *merge_ie) ++{ ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 len = 0; ++ u8 OUI[4] = { 0x50, 0x6f, 0x9a, 0x09 }; ++ u8 ELOUI[6] = { 0xDD, 0x00, 0x50, 0x6f, 0x9a, 0x09 }; //EID;Len;OUI, Len would copy at the end of function ++ int i=0; ++ ++ if( merge_ie != NULL) ++ { ++ //Set first P2P OUI ++ _rtw_memcpy(merge_ie, ELOUI, 6); ++ merge_ie += 6; ++ ++ while( i < in_len) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(in_ie+ i); ++ ++ // Take out the rest of P2P OUIs ++ if( pIE->ElementID == _VENDOR_SPECIFIC_IE_ && _rtw_memcmp(pIE->data, OUI, 4) ) ++ { ++ _rtw_memcpy( merge_ie, pIE->data +4, pIE->Length -4); ++ len += pIE->Length-4; ++ merge_ie += pIE->Length-4; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ return len + 4; // 4 is for P2P OUI ++ ++ } ++ ++ return 0; ++} ++ ++void dump_p2p_ie(u8 *ie, u32 ie_len) { ++ u8* pos = (u8*)ie; ++ u8 id; ++ u16 len; ++ ++ u8 *p2p_ie; ++ uint p2p_ielen; ++ ++ p2p_ie = rtw_get_p2p_ie(ie, ie_len, NULL, &p2p_ielen); ++ if(p2p_ie != ie || p2p_ielen == 0) ++ return; ++ ++ pos+=6; ++ while(pos-ie < ie_len){ ++ id = *pos; ++ len = RTW_GET_LE16(pos+1); ++ ++ DBG_871X("%s ID:%u, LEN:%u\n", __FUNCTION__, id, len); ++ ++ pos+=(3+len); ++ } ++} ++ ++/** ++ * rtw_get_p2p_ie - Search P2P IE from a series of IEs ++ * @in_ie: Address of IEs to search ++ * @in_len: Length limit from in_ie ++ * @p2p_ie: If not NULL and P2P IE is found, P2P IE will be copied to the buf starting from p2p_ie ++ * @p2p_ielen: If not NULL and P2P IE is found, will set to the length of the entire P2P IE ++ * ++ * Returns: The address of the P2P IE found, or NULL ++ */ ++u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen) ++{ ++ uint cnt = 0; ++ u8 *p2p_ie_ptr; ++ u8 eid, p2p_oui[4]={0x50,0x6F,0x9A,0x09}; ++ ++ if ( p2p_ielen != NULL ) ++ *p2p_ielen = 0; ++ ++ while(cnt MAX_IE_SZ)) { ++#ifdef PLATFORM_LINUX ++ dump_stack(); ++#endif ++ return NULL; ++ } ++ if( ( eid == _VENDOR_SPECIFIC_IE_ ) && ( _rtw_memcmp( &in_ie[cnt+2], p2p_oui, 4) == _TRUE ) ) ++ { ++ p2p_ie_ptr = in_ie + cnt; ++ ++ if ( p2p_ie != NULL ) ++ { ++ _rtw_memcpy( p2p_ie, &in_ie[ cnt ], in_ie[ cnt + 1 ] + 2 ); ++ } ++ ++ if ( p2p_ielen != NULL ) ++ { ++ *p2p_ielen = in_ie[ cnt + 1 ] + 2; ++ } ++ ++ return p2p_ie_ptr; ++ ++ break; ++ } ++ else ++ { ++ cnt += in_ie[ cnt + 1 ] +2; //goto next ++ } ++ ++ } ++ ++ return NULL; ++ ++} ++ ++/** ++ * rtw_get_p2p_attr - Search a specific P2P attribute from a given P2P IE ++ * @p2p_ie: Address of P2P IE to search ++ * @p2p_ielen: Length limit from p2p_ie ++ * @target_attr_id: The attribute ID of P2P attribute to search ++ * @buf_attr: If not NULL and the P2P attribute is found, P2P attribute will be copied to the buf starting from buf_attr ++ * @len_attr: If not NULL and the P2P attribute is found, will set to the length of the entire P2P attribute ++ * ++ * Returns: the address of the specific WPS attribute found, or NULL ++ */ ++u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_attr, u32 *len_attr) ++{ ++ u8 *attr_ptr = NULL; ++ u8 *target_attr_ptr = NULL; ++ u8 p2p_oui[4]={0x50,0x6F,0x9A,0x09}; ++ ++ if(len_attr) ++ *len_attr = 0; ++ ++ if ( !p2p_ie || ( p2p_ie[0] != _VENDOR_SPECIFIC_IE_ ) || ++ ( _rtw_memcmp( p2p_ie + 2, p2p_oui , 4 ) != _TRUE ) ) ++ { ++ return attr_ptr; ++ } ++ ++ // 6 = 1(Element ID) + 1(Length) + 3 (OUI) + 1(OUI Type) ++ attr_ptr = p2p_ie + 6; //goto first attr ++ ++ while(attr_ptr - p2p_ie < p2p_ielen) ++ { ++ // 3 = 1(Attribute ID) + 2(Length) ++ u8 attr_id = *attr_ptr; ++ u16 attr_data_len = RTW_GET_LE16(attr_ptr + 1); ++ u16 attr_len = attr_data_len + 3; ++ ++ //DBG_871X("%s attr_ptr:%p, id:%u, length:%u\n", __FUNCTION__, attr_ptr, attr_id, attr_data_len); ++ if( attr_id == target_attr_id ) ++ { ++ target_attr_ptr = attr_ptr; ++ ++ if(buf_attr) ++ _rtw_memcpy(buf_attr, attr_ptr, attr_len); ++ ++ if(len_attr) ++ *len_attr = attr_len; ++ ++ break; ++ } ++ else ++ { ++ attr_ptr += attr_len; //goto next ++ } ++ ++ } ++ ++ return target_attr_ptr; ++} ++ ++/** ++ * rtw_get_p2p_attr_content - Search a specific P2P attribute content from a given P2P IE ++ * @p2p_ie: Address of P2P IE to search ++ * @p2p_ielen: Length limit from p2p_ie ++ * @target_attr_id: The attribute ID of P2P attribute to search ++ * @buf_content: If not NULL and the P2P attribute is found, P2P attribute content will be copied to the buf starting from buf_content ++ * @len_content: If not NULL and the P2P attribute is found, will set to the length of the P2P attribute content ++ * ++ * Returns: the address of the specific P2P attribute content found, or NULL ++ */ ++u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_content, uint *len_content) ++{ ++ u8 *attr_ptr; ++ u32 attr_len; ++ ++ if(len_content) ++ *len_content = 0; ++ ++ attr_ptr = rtw_get_p2p_attr(p2p_ie, p2p_ielen, target_attr_id, NULL, &attr_len); ++ ++ if(attr_ptr && attr_len) ++ { ++ if(buf_content) ++ _rtw_memcpy(buf_content, attr_ptr+3, attr_len-3); ++ ++ if(len_content) ++ *len_content = attr_len-3; ++ ++ return attr_ptr+3; ++ } ++ ++ return NULL; ++} ++ ++u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len, u8 *pdata_attr) ++{ ++ u32 a_len; ++ ++ *pbuf = attr_id; ++ ++ //*(u16*)(pbuf + 1) = cpu_to_le16(attr_len); ++ RTW_PUT_LE16(pbuf + 1, attr_len); ++ ++ if(pdata_attr) ++ _rtw_memcpy(pbuf + 3, pdata_attr, attr_len); ++ ++ a_len = attr_len + 3; ++ ++ return a_len; ++} ++ ++static uint rtw_p2p_attr_remove(u8 *ie, uint ielen_ori, u8 attr_id) ++{ ++ u8 *target_attr; ++ u32 target_attr_len; ++ uint ielen = ielen_ori; ++ int index=0; ++ ++ while(1) { ++ target_attr=rtw_get_p2p_attr(ie, ielen, attr_id, NULL, &target_attr_len); ++ if(target_attr && target_attr_len) ++ { ++ u8 *next_attr = target_attr+target_attr_len; ++ uint remain_len = ielen-(next_attr-ie); ++ //dump_ies(ie, ielen); ++ #if 0 ++ DBG_871X("[%d] ie:%p, ielen:%u\n" ++ "target_attr:%p, target_attr_len:%u\n" ++ "next_attr:%p, remain_len:%u\n" ++ , index++ ++ , ie, ielen ++ , target_attr, target_attr_len ++ , next_attr, remain_len ++ ); ++ #endif ++ ++ _rtw_memset(target_attr, 0, target_attr_len); ++ _rtw_memcpy(target_attr, next_attr, remain_len); ++ _rtw_memset(target_attr+remain_len, 0, target_attr_len); ++ *(ie+1) -= target_attr_len; ++ ielen-=target_attr_len; ++ } ++ else ++ { ++ //if(index>0) ++ // dump_ies(ie, ielen); ++ break; ++ } ++ } ++ ++ return ielen; ++} ++ ++void rtw_WLAN_BSSID_EX_remove_p2p_attr(WLAN_BSSID_EX *bss_ex, u8 attr_id) ++{ ++ u8 *p2p_ie; ++ uint p2p_ielen, p2p_ielen_ori; ++ int cnt; ++ ++ if( (p2p_ie=rtw_get_p2p_ie(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_, NULL, &p2p_ielen_ori)) ) ++ { ++ #if 0 ++ if(rtw_get_p2p_attr(p2p_ie, p2p_ielen_ori, attr_id, NULL, NULL)) { ++ DBG_871X("rtw_get_p2p_attr: GOT P2P_ATTR:%u!!!!!!!!\n", attr_id); ++ dump_ies(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_); ++ } ++ #endif ++ ++ p2p_ielen=rtw_p2p_attr_remove(p2p_ie, p2p_ielen_ori, attr_id); ++ if(p2p_ielen != p2p_ielen_ori) { ++ ++ u8 *next_ie_ori = p2p_ie+p2p_ielen_ori; ++ u8 *next_ie = p2p_ie+p2p_ielen; ++ uint remain_len = bss_ex->IELength-(next_ie_ori-bss_ex->IEs); ++ ++ _rtw_memcpy(next_ie, next_ie_ori, remain_len); ++ _rtw_memset(next_ie+remain_len, 0, p2p_ielen_ori-p2p_ielen); ++ bss_ex->IELength -= p2p_ielen_ori-p2p_ielen; ++ ++ #if 0 ++ DBG_871X("remove P2P_ATTR:%u!\n", attr_id); ++ dump_ies(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_); ++ #endif ++ } ++ } ++} ++ ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_WFD ++int rtw_get_wfd_ie(u8 *in_ie, int in_len, u8 *wfd_ie, uint *wfd_ielen) ++{ ++ int match; ++ uint cnt = 0; ++ u8 eid, wfd_oui[4]={0x50,0x6F,0x9A,0x0A}; ++ ++ ++ match=_FALSE; ++ ++ if ( in_len < 0 ) ++ { ++ return match; ++ } ++ ++ while(cnt 1 byte for attribute ID field, 2 bytes for length field ++ if(attr_content) ++ _rtw_memcpy( attr_content, &wfd_ie[ cnt + 3 ], attrlen ); ++ ++ if(attr_contentlen) ++ *attr_contentlen = attrlen; ++ ++ cnt += attrlen + 3; ++ ++ match = _TRUE; ++ break; ++ } ++ else ++ { ++ cnt += attrlen + 3; //goto next ++ } ++ ++ } ++ ++ return match; ++ ++} ++#endif // CONFIG_WFD ++ ++//Baron adds to avoid FreeBSD warning ++int ieee80211_is_empty_essid(const char *essid, int essid_len) ++{ ++ /* Single white space is for Linksys APs */ ++ if (essid_len == 1 && essid[0] == ' ') ++ return 1; ++ ++ /* Otherwise, if the entire essid is 0, we assume it is hidden */ ++ while (essid_len) { ++ essid_len--; ++ if (essid[essid_len] != '\0') ++ return 0; ++ } ++ ++ return 1; ++} ++ ++int ieee80211_get_hdrlen(u16 fc) ++{ ++ int hdrlen = 24; ++ ++ switch (WLAN_FC_GET_TYPE(fc)) { ++ case RTW_IEEE80211_FTYPE_DATA: ++ if (fc & RTW_IEEE80211_STYPE_QOS_DATA) ++ hdrlen += 2; ++ if ((fc & RTW_IEEE80211_FCTL_FROMDS) && (fc & RTW_IEEE80211_FCTL_TODS)) ++ hdrlen += 6; /* Addr4 */ ++ break; ++ case RTW_IEEE80211_FTYPE_CTL: ++ switch (WLAN_FC_GET_STYPE(fc)) { ++ case RTW_IEEE80211_STYPE_CTS: ++ case RTW_IEEE80211_STYPE_ACK: ++ hdrlen = 10; ++ break; ++ default: ++ hdrlen = 16; ++ break; ++ } ++ break; ++ } ++ ++ return hdrlen; ++} ++ ++//show MCS rate, unit: 100Kbps ++u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40, unsigned char * MCS_rate) ++{ ++ u16 max_rate = 0; ++ ++ if(rf_type == RF_1T1R) ++ { ++ if(MCS_rate[0] & BIT(7)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650); ++ else if(MCS_rate[0] & BIT(6)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585); ++ else if(MCS_rate[0] & BIT(5)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520); ++ else if(MCS_rate[0] & BIT(4)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390); ++ else if(MCS_rate[0] & BIT(3)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260); ++ else if(MCS_rate[0] & BIT(2)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195); ++ else if(MCS_rate[0] & BIT(1)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130); ++ else if(MCS_rate[0] & BIT(0)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65); ++ } ++ else ++ { ++ if(MCS_rate[1]) ++ { ++ if(MCS_rate[1] & BIT(7)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?3000:2700):((short_GI_20)?1444:1300); ++ else if(MCS_rate[1] & BIT(6)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?2700:2430):((short_GI_20)?1300:1170); ++ else if(MCS_rate[1] & BIT(5)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?2400:2160):((short_GI_20)?1156:1040); ++ else if(MCS_rate[1] & BIT(4)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1800:1620):((short_GI_20)?867:780); ++ else if(MCS_rate[1] & BIT(3)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520); ++ else if(MCS_rate[1] & BIT(2)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390); ++ else if(MCS_rate[1] & BIT(1)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260); ++ else if(MCS_rate[1] & BIT(0)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130); ++ } ++ else ++ { ++ if(MCS_rate[0] & BIT(7)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650); ++ else if(MCS_rate[0] & BIT(6)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585); ++ else if(MCS_rate[0] & BIT(5)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520); ++ else if(MCS_rate[0] & BIT(4)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390); ++ else if(MCS_rate[0] & BIT(3)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260); ++ else if(MCS_rate[0] & BIT(2)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195); ++ else if(MCS_rate[0] & BIT(1)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130); ++ else if(MCS_rate[0] & BIT(0)) ++ max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65); ++ } ++ } ++ return max_rate; ++} ++ ++int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8* category, u8 *action) ++{ ++ const u8 *frame_body = frame + sizeof(struct rtw_ieee80211_hdr_3addr); ++ u16 fc; ++ u8 c, a; ++ ++ fc = le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)frame)->frame_ctl); ++ ++ if ((fc & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE)) ++ != (RTW_IEEE80211_FTYPE_MGMT|RTW_IEEE80211_STYPE_ACTION) ++ ) ++ { ++ return _FALSE; ++ } ++ ++ c = frame_body[0]; ++ ++ switch(c) { ++ case RTW_WLAN_CATEGORY_P2P: /* vendor-specific */ ++ break; ++ default: ++ a = frame_body[1]; ++ } ++ ++ if (category) ++ *category = c; ++ if (action) ++ *action = a; ++ ++ return _TRUE; ++} ++ ++static const char *_action_public_str[] = { ++ "ACT_PUB_BSSCOEXIST", ++ "ACT_PUB_DSE_ENABLE", ++ "ACT_PUB_DSE_DEENABLE", ++ "ACT_PUB_DSE_REG_LOCATION", ++ "ACT_PUB_EXT_CHL_SWITCH", ++ "ACT_PUB_DSE_MSR_REQ", ++ "ACT_PUB_DSE_MSR_RPRT", ++ "ACT_PUB_MP", ++ "ACT_PUB_DSE_PWR_CONSTRAINT", ++ "ACT_PUB_VENDOR", ++ "ACT_PUB_GAS_INITIAL_REQ", ++ "ACT_PUB_GAS_INITIAL_RSP", ++ "ACT_PUB_GAS_COMEBACK_REQ", ++ "ACT_PUB_GAS_COMEBACK_RSP", ++ "ACT_PUB_TDLS_DISCOVERY_RSP", ++ "ACT_PUB_LOCATION_TRACK", ++ "ACT_PUB_RSVD", ++}; ++ ++const char *action_public_str(u8 action) ++{ ++ action = (action >= ACT_PUBLIC_MAX) ? ACT_PUBLIC_MAX : action; ++ return _action_public_str[action]; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_io.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_io.c +new file mode 100644 +index 000000000000..3e8ee42fe798 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_io.c +@@ -0,0 +1,462 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/* ++ ++The purpose of rtw_io.c ++ ++a. provides the API ++ ++b. provides the protocol engine ++ ++c. provides the software interface between caller and the hardware interface ++ ++ ++Compiler Flag Option: ++ ++1. CONFIG_SDIO_HCI: ++ a. USE_SYNC_IRP: Only sync operations are provided. ++ b. USE_ASYNC_IRP:Both sync/async operations are provided. ++ ++2. CONFIG_USB_HCI: ++ a. USE_ASYNC_IRP: Both sync/async operations are provided. ++ ++3. CONFIG_CFIO_HCI: ++ b. USE_SYNC_IRP: Only sync operations are provided. ++ ++ ++Only sync read/rtw_write_mem operations are provided. ++ ++jackson@realtek.com.tw ++ ++*/ ++ ++#define _RTW_IO_C_ ++#include ++#include ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++#error "Shall be Linux or Windows, but not both!\n" ++#endif ++ ++#ifdef CONFIG_SDIO_HCI ++#include ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++#include ++#endif ++ ++ ++u8 _rtw_read8(_adapter *adapter, u32 addr) ++{ ++ u8 r_val; ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr); ++ _func_enter_; ++ _read8 = pintfhdl->io_ops._read8; ++ ++ r_val = _read8(pintfhdl, addr); ++ _func_exit_; ++ return r_val; ++} ++ ++u16 _rtw_read16(_adapter *adapter, u32 addr) ++{ ++ u16 r_val; ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr); ++ _func_enter_; ++ _read16 = pintfhdl->io_ops._read16; ++ ++ r_val = _read16(pintfhdl, addr); ++ _func_exit_; ++ return r_val; ++} ++ ++u32 _rtw_read32(_adapter *adapter, u32 addr) ++{ ++ u32 r_val; ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr); ++ _func_enter_; ++ _read32 = pintfhdl->io_ops._read32; ++ ++ r_val = _read32(pintfhdl, addr); ++ _func_exit_; ++ return r_val; ++ ++} ++ ++int _rtw_write8(_adapter *adapter, u32 addr, u8 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val); ++ int ret; ++ _func_enter_; ++ _write8 = pintfhdl->io_ops._write8; ++ ++ ret = _write8(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++int _rtw_write16(_adapter *adapter, u32 addr, u16 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val); ++ int ret; ++ _func_enter_; ++ _write16 = pintfhdl->io_ops._write16; ++ ++ ret = _write16(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++int _rtw_write32(_adapter *adapter, u32 addr, u32 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val); ++ int ret; ++ _func_enter_; ++ _write32 = pintfhdl->io_ops._write32; ++ ++ ret = _write32(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++ ++int _rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *pdata) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = (struct intf_hdl*)(&(pio_priv->intf)); ++ int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr,u32 length, u8 *pdata); ++ int ret; ++ _func_enter_; ++ _writeN = pintfhdl->io_ops._writeN; ++ ++ ret = _writeN(pintfhdl, addr,length,pdata); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++int _rtw_write8_async(_adapter *adapter, u32 addr, u8 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val); ++ int ret; ++ _func_enter_; ++ _write8_async = pintfhdl->io_ops._write8_async; ++ ++ ret = _write8_async(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++int _rtw_write16_async(_adapter *adapter, u32 addr, u16 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val); ++ int ret; ++ _func_enter_; ++ _write16_async = pintfhdl->io_ops._write16_async; ++ ++ ret = _write16_async(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++int _rtw_write32_async(_adapter *adapter, u32 addr, u32 val) ++{ ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val); ++ int ret; ++ _func_enter_; ++ _write32_async = pintfhdl->io_ops._write32_async; ++ ++ ret = _write32_async(pintfhdl, addr, val); ++ _func_exit_; ++ ++ return RTW_STATUS_CODE(ret); ++} ++void _rtw_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem) ++{ ++ void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ ++ _func_enter_; ++ ++ if( (adapter->bDriverStopped ==_TRUE) || (adapter->bSurpriseRemoved == _TRUE)) ++ { ++ RT_TRACE(_module_rtl871x_io_c_, _drv_info_, ("rtw_read_mem:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved)); ++ return; ++ } ++ ++ _read_mem = pintfhdl->io_ops._read_mem; ++ ++ _read_mem(pintfhdl, addr, cnt, pmem); ++ ++ _func_exit_; ++ ++} ++ ++void _rtw_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem) ++{ ++ void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ ++ _func_enter_; ++ ++ _write_mem = pintfhdl->io_ops._write_mem; ++ ++ _write_mem(pintfhdl, addr, cnt, pmem); ++ ++ _func_exit_; ++ ++} ++ ++void _rtw_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem) ++{ ++ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ ++ _func_enter_; ++ ++ if( (adapter->bDriverStopped ==_TRUE) || (adapter->bSurpriseRemoved == _TRUE)) ++ { ++ RT_TRACE(_module_rtl871x_io_c_, _drv_info_, ("rtw_read_port:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved)); ++ return; ++ } ++ ++ _read_port = pintfhdl->io_ops._read_port; ++ ++ _read_port(pintfhdl, addr, cnt, pmem); ++ ++ _func_exit_; ++ ++} ++ ++void _rtw_read_port_cancel(_adapter *adapter) ++{ ++ void (*_read_port_cancel)(struct intf_hdl *pintfhdl); ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ ++ _read_port_cancel = pintfhdl->io_ops._read_port_cancel; ++ ++ if(_read_port_cancel) ++ _read_port_cancel(pintfhdl); ++ ++} ++ ++u32 _rtw_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem) ++{ ++ u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ //struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ u32 ret = _SUCCESS; ++ ++ _func_enter_; ++ ++ _write_port = pintfhdl->io_ops._write_port; ++ ++ ret = _write_port(pintfhdl, addr, cnt, pmem); ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++u32 _rtw_write_port_and_wait(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms) ++{ ++ int ret = _SUCCESS; ++ struct xmit_buf *pxmitbuf = (struct xmit_buf *)pmem; ++ struct submit_ctx sctx; ++ ++ rtw_sctx_init(&sctx, timeout_ms); ++ pxmitbuf->sctx = &sctx; ++ ++ ret = _rtw_write_port(adapter, addr, cnt, pmem); ++ ++ if (ret == _SUCCESS) ++ ret = rtw_sctx_wait(&sctx); ++ ++ return ret; ++} ++ ++void _rtw_write_port_cancel(_adapter *adapter) ++{ ++ void (*_write_port_cancel)(struct intf_hdl *pintfhdl); ++ struct io_priv *pio_priv = &adapter->iopriv; ++ struct intf_hdl *pintfhdl = &(pio_priv->intf); ++ ++ _write_port_cancel = pintfhdl->io_ops._write_port_cancel; ++ ++ if(_write_port_cancel) ++ _write_port_cancel(pintfhdl); ++ ++} ++ ++int rtw_init_io_priv(_adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops)) ++{ ++ struct io_priv *piopriv = &padapter->iopriv; ++ struct intf_hdl *pintf = &piopriv->intf; ++ ++ if (set_intf_ops == NULL) ++ return _FAIL; ++ ++ piopriv->padapter = padapter; ++ pintf->padapter = padapter; ++ pintf->pintf_dev = adapter_to_dvobj(padapter); ++ ++ set_intf_ops(&pintf->io_ops); ++ ++ return _SUCCESS; ++} ++ ++#ifdef DBG_IO ++ ++u16 read_sniff_ranges[][2] = { ++ //{0x550, 0x551}, ++}; ++ ++u16 write_sniff_ranges[][2] = { ++ //{0x550, 0x551}, ++ //{0x4c, 0x4c}, ++}; ++ ++int read_sniff_num = sizeof(read_sniff_ranges)/sizeof(u16)/2; ++int write_sniff_num = sizeof(write_sniff_ranges)/sizeof(u16)/2; ++ ++bool match_read_sniff_ranges(u16 addr, u16 len) ++{ ++ int i; ++ for (i = 0; i read_sniff_ranges[i][0] && addr <= read_sniff_ranges[i][1]) ++ return _TRUE; ++ } ++ ++ return _FALSE; ++} ++ ++bool match_write_sniff_ranges(u16 addr, u16 len) ++{ ++ int i; ++ for (i = 0; i write_sniff_ranges[i][0] && addr <= write_sniff_ranges[i][1]) ++ return _TRUE; ++ } ++ ++ return _FALSE; ++} ++ ++u8 dbg_rtw_read8(_adapter *adapter, u32 addr, const char *caller, const int line) ++{ ++ u8 val = _rtw_read8(adapter, addr); ++ ++ if (match_read_sniff_ranges(addr, 1)) ++ DBG_871X("DBG_IO %s:%d rtw_read8(0x%04x) return 0x%02x\n", caller, line, addr, val); ++ ++ return val; ++} ++ ++u16 dbg_rtw_read16(_adapter *adapter, u32 addr, const char *caller, const int line) ++{ ++ u16 val = _rtw_read16(adapter, addr); ++ ++ if (match_read_sniff_ranges(addr, 2)) ++ DBG_871X("DBG_IO %s:%d rtw_read16(0x%04x) return 0x%04x\n", caller, line, addr, val); ++ ++ return val; ++} ++ ++u32 dbg_rtw_read32(_adapter *adapter, u32 addr, const char *caller, const int line) ++{ ++ u32 val = _rtw_read32(adapter, addr); ++ ++ if (match_read_sniff_ranges(addr, 4)) ++ DBG_871X("DBG_IO %s:%d rtw_read32(0x%04x) return 0x%08x\n", caller, line, addr, val); ++ ++ return val; ++} ++ ++int dbg_rtw_write8(_adapter *adapter, u32 addr, u8 val, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 1)) ++ DBG_871X("DBG_IO %s:%d rtw_write8(0x%04x, 0x%02x)\n", caller, line, addr, val); ++ ++ return _rtw_write8(adapter, addr, val); ++} ++int dbg_rtw_write16(_adapter *adapter, u32 addr, u16 val, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 2)) ++ DBG_871X("DBG_IO %s:%d rtw_write16(0x%04x, 0x%04x)\n", caller, line, addr, val); ++ ++ return _rtw_write16(adapter, addr, val); ++} ++int dbg_rtw_write32(_adapter *adapter, u32 addr, u32 val, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 4)) ++ DBG_871X("DBG_IO %s:%d rtw_write32(0x%04x, 0x%08x)\n", caller, line, addr, val); ++ ++ return _rtw_write32(adapter, addr, val); ++} ++int dbg_rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *data, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, length)) ++ DBG_871X("DBG_IO %s:%d rtw_writeN(0x%04x, %u)\n", caller, line, addr, length); ++ ++ return _rtw_writeN(adapter, addr, length, data); ++} ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_query.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_query.c +new file mode 100644 +index 000000000000..a67b08dce3b2 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_query.c +@@ -0,0 +1,195 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_IOCTL_QUERY_C_ ++ ++#include ++#include ++#include ++#include ++#include ++ ++ ++#ifdef PLATFORM_WINDOWS ++// ++// Added for WPA2-PSK, by Annie, 2005-09-20. ++// ++u8 ++query_802_11_capability( ++ _adapter* Adapter, ++ u8* pucBuf, ++ u32 * pulOutLen ++) ++{ ++ static NDIS_802_11_AUTHENTICATION_ENCRYPTION szAuthEnc[] = ++ { ++ {Ndis802_11AuthModeOpen, Ndis802_11EncryptionDisabled}, ++ {Ndis802_11AuthModeOpen, Ndis802_11Encryption1Enabled}, ++ {Ndis802_11AuthModeShared, Ndis802_11EncryptionDisabled}, ++ {Ndis802_11AuthModeShared, Ndis802_11Encryption1Enabled}, ++ {Ndis802_11AuthModeWPA, Ndis802_11Encryption2Enabled}, ++ {Ndis802_11AuthModeWPA, Ndis802_11Encryption3Enabled}, ++ {Ndis802_11AuthModeWPAPSK, Ndis802_11Encryption2Enabled}, ++ {Ndis802_11AuthModeWPAPSK, Ndis802_11Encryption3Enabled}, ++ {Ndis802_11AuthModeWPANone, Ndis802_11Encryption2Enabled}, ++ {Ndis802_11AuthModeWPANone, Ndis802_11Encryption3Enabled}, ++ {Ndis802_11AuthModeWPA2, Ndis802_11Encryption2Enabled}, ++ {Ndis802_11AuthModeWPA2, Ndis802_11Encryption3Enabled}, ++ {Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption2Enabled}, ++ {Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption3Enabled} ++ }; ++ static ULONG ulNumOfPairSupported = sizeof(szAuthEnc)/sizeof(NDIS_802_11_AUTHENTICATION_ENCRYPTION); ++ NDIS_802_11_CAPABILITY * pCap = (NDIS_802_11_CAPABILITY *)pucBuf; ++ u8* pucAuthEncryptionSupported = (u8*) pCap->AuthenticationEncryptionSupported; ++ ++ ++ pCap->Length = sizeof(NDIS_802_11_CAPABILITY); ++ if(ulNumOfPairSupported > 1 ) ++ pCap->Length += (ulNumOfPairSupported-1) * sizeof(NDIS_802_11_AUTHENTICATION_ENCRYPTION); ++ ++ pCap->Version = 2; ++ pCap->NoOfPMKIDs = NUM_PMKID_CACHE; ++ pCap->NoOfAuthEncryptPairsSupported = ulNumOfPairSupported; ++ ++ if( sizeof (szAuthEnc) <= 240 ) // 240 = 256 - 4*4 // SecurityInfo.szCapability: only 256 bytes in size. ++ { ++ _rtw_memcpy( pucAuthEncryptionSupported, (u8*)szAuthEnc, sizeof (szAuthEnc) ); ++ *pulOutLen = pCap->Length; ++ return _TRUE; ++ } ++ else ++ { ++ *pulOutLen = 0; ++ RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("_query_802_11_capability(): szAuthEnc size is too large.\n")); ++ return _FALSE; ++ } ++} ++ ++u8 query_802_11_association_information( _adapter *padapter,PNDIS_802_11_ASSOCIATION_INFORMATION pAssocInfo) ++{ ++ struct wlan_network *tgt_network; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct security_priv *psecuritypriv=&(padapter->securitypriv); ++ WLAN_BSSID_EX *psecnetwork=(WLAN_BSSID_EX*)&(psecuritypriv->sec_bss); ++ u8 * pDest = (u8 *)pAssocInfo + sizeof(NDIS_802_11_ASSOCIATION_INFORMATION); ++ unsigned char i,*auth_ie,*supp_ie; ++ ++ //NdisZeroMemory(pAssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)); ++ _rtw_memset(pAssocInfo, 0, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)); ++ //pAssocInfo->Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION); ++ ++ //------------------------------------------------------ ++ // Association Request related information ++ //------------------------------------------------------ ++ // Req_1. AvailableRequestFixedIEs ++ if(psecnetwork!=NULL){ ++ ++ pAssocInfo->AvailableRequestFixedIEs |= NDIS_802_11_AI_REQFI_CAPABILITIES|NDIS_802_11_AI_REQFI_CURRENTAPADDRESS; ++ pAssocInfo->RequestFixedIEs.Capabilities = (unsigned short)* & psecnetwork->IEs[10]; ++ _rtw_memcpy(pAssocInfo->RequestFixedIEs.CurrentAPAddress, ++ & psecnetwork->MacAddress, 6); ++ ++ pAssocInfo->OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION); ++ ++ if(check_fwstate( pmlmepriv, _FW_UNDER_LINKING|_FW_LINKED)==_TRUE) ++ { ++ ++ if(psecuritypriv->ndisauthtype>=Ndis802_11AuthModeWPA2) ++ pDest[0] =48; //RSN Information Element ++ else ++ pDest[0] =221; //WPA(SSN) Information Element ++ ++ RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n Adapter->ndisauthtype==Ndis802_11AuthModeWPA)?0xdd:0x30 [%d]",pDest[0])); ++ supp_ie=&psecuritypriv->supplicant_ie[0]; ++ for(i=0;inetwork.IELength=%d\n\n", i,(int)psecnetwork->IELength)); ++ while((iRequestIELength += (2 + supp_ie[1+i]);// (2 + psecnetwork->IEs[1+i]+4); ++ ++ } ++ ++ ++ RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n psecnetwork != NULL,fwstate==_FW_UNDER_LINKING \n")); ++ ++ } ++ ++ ++ //------------------------------------------------------ ++ // Association Response related information ++ //------------------------------------------------------ ++ ++ if(check_fwstate( pmlmepriv, _FW_LINKED)==_TRUE) ++ { ++ tgt_network =&(pmlmepriv->cur_network); ++ if(tgt_network!=NULL){ ++ pAssocInfo->AvailableResponseFixedIEs = ++ NDIS_802_11_AI_RESFI_CAPABILITIES ++ |NDIS_802_11_AI_RESFI_ASSOCIATIONID ++ ; ++ ++ pAssocInfo->ResponseFixedIEs.Capabilities =(unsigned short)* & tgt_network->network.IEs[10]; ++ pAssocInfo->ResponseFixedIEs.StatusCode = 0; ++ pAssocInfo->ResponseFixedIEs.AssociationId =(unsigned short) tgt_network->aid; ++ ++ pDest = (u8 *)pAssocInfo + sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)+pAssocInfo->RequestIELength; ++ auth_ie=&psecuritypriv->authenticator_ie[0]; ++ ++ for(i=0;i0){ ++ _rtw_memcpy((u8 *)&pDest[0],&auth_ie[1],i); ++ pAssocInfo->ResponseIELength =i; ++ } ++ ++ ++ pAssocInfo->OffsetResponseIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION) + pAssocInfo->RequestIELength; ++ ++ ++ RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n tgt_network != NULL,fwstate==_FW_LINKED \n")); ++ } ++ } ++ RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n exit query_802_11_association_information \n")); ++_func_exit_; ++ ++ return _TRUE; ++} ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_rtl.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_rtl.c +new file mode 100644 +index 000000000000..4e663d7a6809 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_rtl.c +@@ -0,0 +1,1031 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_IOCTL_RTL_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#ifdef CONFIG_MP_INCLUDED ++#include ++#include ++#endif ++ ++struct oid_obj_priv oid_rtl_seg_01_01[] = ++{ ++ {1, &oid_null_function}, //0x80 ++ {1, &oid_null_function}, //0x81 ++ {1, &oid_null_function}, //0x82 ++ {1, &oid_null_function}, //0x83//OID_RT_SET_SNIFFER_MODE ++ {1, &oid_rt_get_signal_quality_hdl}, //0x84 ++ {1, &oid_rt_get_small_packet_crc_hdl}, //0x85 ++ {1, &oid_rt_get_middle_packet_crc_hdl}, //0x86 ++ {1, &oid_rt_get_large_packet_crc_hdl}, //0x87 ++ {1, &oid_rt_get_tx_retry_hdl}, //0x88 ++ {1, &oid_rt_get_rx_retry_hdl}, //0x89 ++ {1, &oid_rt_pro_set_fw_dig_state_hdl}, //0x8A ++ {1, &oid_rt_pro_set_fw_ra_state_hdl} , //0x8B ++ {1, &oid_null_function}, //0x8C ++ {1, &oid_null_function}, //0x8D ++ {1, &oid_null_function}, //0x8E ++ {1, &oid_null_function}, //0x8F ++ {1, &oid_rt_get_rx_total_packet_hdl}, //0x90 ++ {1, &oid_rt_get_tx_beacon_ok_hdl}, //0x91 ++ {1, &oid_rt_get_tx_beacon_err_hdl}, //0x92 ++ {1, &oid_rt_get_rx_icv_err_hdl}, //0x93 ++ {1, &oid_rt_set_encryption_algorithm_hdl}, //0x94 ++ {1, &oid_null_function}, //0x95 ++ {1, &oid_rt_get_preamble_mode_hdl}, //0x96 ++ {1, &oid_null_function}, //0x97 ++ {1, &oid_rt_get_ap_ip_hdl}, //0x98 ++ {1, &oid_rt_get_channelplan_hdl}, //0x99 ++ {1, &oid_rt_set_preamble_mode_hdl}, //0x9A ++ {1, &oid_rt_set_bcn_intvl_hdl}, //0x9B ++ {1, &oid_null_function}, //0x9C ++ {1, &oid_rt_dedicate_probe_hdl}, //0x9D ++ {1, &oid_null_function}, //0x9E ++ {1, &oid_null_function}, //0x9F ++ {1, &oid_null_function}, //0xA0 ++ {1, &oid_null_function}, //0xA1 ++ {1, &oid_null_function}, //0xA2 ++ {1, &oid_null_function}, //0xA3 ++ {1, &oid_null_function}, //0xA4 ++ {1, &oid_null_function}, //0xA5 ++ {1, &oid_null_function}, //0xA6 ++ {1, &oid_rt_get_total_tx_bytes_hdl}, //0xA7 ++ {1, &oid_rt_get_total_rx_bytes_hdl}, //0xA8 ++ {1, &oid_rt_current_tx_power_level_hdl}, //0xA9 ++ {1, &oid_rt_get_enc_key_mismatch_count_hdl}, //0xAA ++ {1, &oid_rt_get_enc_key_match_count_hdl}, //0xAB ++ {1, &oid_rt_get_channel_hdl}, //0xAC ++ {1, &oid_rt_set_channelplan_hdl}, //0xAD ++ {1, &oid_rt_get_hardware_radio_off_hdl}, //0xAE ++ {1, &oid_null_function}, //0xAF ++ {1, &oid_null_function}, //0xB0 ++ {1, &oid_null_function}, //0xB1 ++ {1, &oid_null_function}, //0xB2 ++ {1, &oid_null_function}, //0xB3 ++ {1, &oid_rt_get_key_mismatch_hdl}, //0xB4 ++ {1, &oid_null_function}, //0xB5 ++ {1, &oid_null_function}, //0xB6 ++ {1, &oid_null_function}, //0xB7 ++ {1, &oid_null_function}, //0xB8 ++ {1, &oid_null_function}, //0xB9 ++ {1, &oid_null_function}, //0xBA ++ {1, &oid_rt_supported_wireless_mode_hdl}, //0xBB ++ {1, &oid_rt_get_channel_list_hdl}, //0xBC ++ {1, &oid_rt_get_scan_in_progress_hdl}, //0xBD ++ {1, &oid_null_function}, //0xBE ++ {1, &oid_null_function}, //0xBF ++ {1, &oid_null_function}, //0xC0 ++ {1, &oid_rt_forced_data_rate_hdl}, //0xC1 ++ {1, &oid_rt_wireless_mode_for_scan_list_hdl}, //0xC2 ++ {1, &oid_rt_get_bss_wireless_mode_hdl}, //0xC3 ++ {1, &oid_rt_scan_with_magic_packet_hdl}, //0xC4 ++ {1, &oid_null_function}, //0xC5 ++ {1, &oid_null_function}, //0xC6 ++ {1, &oid_null_function}, //0xC7 ++ {1, &oid_null_function}, //0xC8 ++ {1, &oid_null_function}, //0xC9 ++ {1, &oid_null_function}, //0xCA ++ {1, &oid_null_function}, //0xCB ++ {1, &oid_null_function}, //0xCC ++ {1, &oid_null_function}, //0xCD ++ {1, &oid_null_function}, //0xCE ++ {1, &oid_null_function}, //0xCF ++ ++}; ++ ++struct oid_obj_priv oid_rtl_seg_01_03[] = ++{ ++ {1, &oid_rt_ap_get_associated_station_list_hdl}, //0x00 ++ {1, &oid_null_function}, //0x01 ++ {1, &oid_rt_ap_switch_into_ap_mode_hdl}, //0x02 ++ {1, &oid_null_function}, //0x03 ++ {1, &oid_rt_ap_supported_hdl}, //0x04 ++ {1, &oid_rt_ap_set_passphrase_hdl}, //0x05 ++ ++}; ++ ++struct oid_obj_priv oid_rtl_seg_01_11[] = ++{ ++ {1, &oid_null_function}, //0xC0 OID_RT_PRO_RX_FILTER ++ {1, &oid_null_function}, //0xC1 OID_CE_USB_WRITE_REGISTRY ++ {1, &oid_null_function}, //0xC2 OID_CE_USB_READ_REGISTRY ++ {1, &oid_null_function}, //0xC3 OID_RT_PRO_SET_INITIAL_GAIN ++ {1, &oid_null_function}, //0xC4 OID_RT_PRO_SET_BB_RF_STANDBY_MODE ++ {1, &oid_null_function}, //0xC5 OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE ++ {1, &oid_null_function}, //0xC6 OID_RT_PRO_SET_TX_CHARGE_PUMP ++ {1, &oid_null_function}, //0xC7 OID_RT_PRO_SET_RX_CHARGE_PUMP ++ {1, &oid_rt_pro_rf_write_registry_hdl}, //0xC8 ++ {1, &oid_rt_pro_rf_read_registry_hdl}, //0xC9 ++ {1, &oid_null_function} //0xCA OID_RT_PRO_QUERY_RF_TYPE ++ ++}; ++ ++struct oid_obj_priv oid_rtl_seg_03_00[] = ++{ ++ {1, &oid_null_function}, //0x00 ++ {1, &oid_rt_get_connect_state_hdl}, //0x01 ++ {1, &oid_null_function}, //0x02 ++ {1, &oid_null_function}, //0x03 ++ {1, &oid_rt_set_default_key_id_hdl}, //0x04 ++ ++ ++}; ++ ++ ++//************** oid_rtl_seg_01_01 section start ************** ++ ++NDIS_STATUS oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ _irqL oldirql; ++ ++ _func_enter_; ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ _irqlevel_changed_(&oldirql,LOWER); ++ if(poid_par_priv->information_buf_len >= sizeof(struct setdig_parm)) ++ { ++ //DEBUG_ERR(("===> oid_rt_pro_set_fw_dig_state_hdl. type:0x%02x.\n",*((unsigned char*)poid_par_priv->information_buf ))); ++ if(!rtw_setfwdig_cmd(Adapter,*((unsigned char*)poid_par_priv->information_buf ))) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++ } ++ else{ ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ _irqlevel_changed_(&oldirql,RAISE); ++ _func_exit_; ++#endif ++ return status; ++} ++//----------------------------------------------------------------------------- ++NDIS_STATUS oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ _irqL oldirql; ++ ++ _func_enter_; ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ ++ _irqlevel_changed_(&oldirql,LOWER); ++ ++ if(poid_par_priv->information_buf_len >= sizeof(struct setra_parm)) ++ { ++ //DEBUG_ERR(("===> oid_rt_pro_set_fw_ra_state_hdl. type:0x%02x.\n",*((unsigned char*)poid_par_priv->information_buf ))); ++ if(!rtw_setfwra_cmd(Adapter,*((unsigned char*)poid_par_priv->information_buf ))) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++ } ++ else{ ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ _irqlevel_changed_(&oldirql,RAISE); ++ _func_exit_; ++#endif ++ return status; ++} ++//----------------------------------------------------------------------------- ++NDIS_STATUS oid_rt_get_signal_quality_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ //DEBUG_ERR(("<**********************oid_rt_get_signal_quality_hdl \n")); ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++#if 0 ++ if(pMgntInfo->mAssoc || pMgntInfo->mIbss) ++ { ++ ulInfo = pAdapter->RxStats.SignalQuality; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ ulInfo = 0xffffffff; // It stands for -1 in 4-byte integer. ++ } ++ break; ++#endif ++ ++ return status; ++} ++ ++//------------------------------------------------------------------------------ ++ ++NDIS_STATUS oid_rt_get_small_packet_crc_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if(poid_par_priv->information_buf_len >= sizeof(ULONG) ) ++ { ++ *(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_smallpacket_crcerr; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if(poid_par_priv->information_buf_len >= sizeof(ULONG) ) ++ { ++ *(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_middlepacket_crcerr; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_large_packet_crc_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if(poid_par_priv->information_buf_len >= sizeof(ULONG) ) ++ { ++ *(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_largepacket_crcerr; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ ++ return status; ++} ++ ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_tx_retry_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_rx_retry_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_rx_total_packet_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len >= sizeof(ULONG) ) ++ { ++ *(u64 *)poid_par_priv->information_buf = padapter->recvpriv.rx_pkts + padapter->recvpriv.rx_drop; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_rx_icv_err_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len>= sizeof(u32)) ++ { ++ //_rtw_memcpy(*(uint *)poid_par_priv->information_buf,padapter->recvpriv.rx_icv_err,sizeof(u32)); ++ *(uint *)poid_par_priv->information_buf = padapter->recvpriv.rx_icv_err; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH ; ++ } ++ ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_preamble_mode_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ULONG preamblemode = 0 ; ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len>= sizeof(ULONG)) ++ { ++ if(padapter->registrypriv.preamble == PREAMBLE_LONG) ++ preamblemode = 0; ++ else if (padapter->registrypriv.preamble == PREAMBLE_AUTO) ++ preamblemode = 1; ++ else if (padapter->registrypriv.preamble == PREAMBLE_SHORT) ++ preamblemode = 2; ++ ++ ++ *(ULONG *)poid_par_priv->information_buf = preamblemode ; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH ; ++ } ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_ap_ip_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_get_channelplan_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ struct eeprom_priv* peeprompriv = &padapter->eeprompriv; ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ *(u16 *)poid_par_priv->information_buf = peeprompriv->channel_plan ; ++ ++ return status; ++} ++NDIS_STATUS oid_rt_set_channelplan_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ struct eeprom_priv* peeprompriv = &padapter->eeprompriv; ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ peeprompriv->channel_plan = *(u16 *)poid_par_priv->information_buf ; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_set_preamble_mode_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ULONG preamblemode = 0; ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if(poid_par_priv->information_buf_len>= sizeof(ULONG)) ++ { ++ preamblemode = *(ULONG *)poid_par_priv->information_buf ; ++ if( preamblemode == 0) ++ padapter->registrypriv.preamble = PREAMBLE_LONG; ++ else if (preamblemode==1 ) ++ padapter->registrypriv.preamble = PREAMBLE_AUTO; ++ else if ( preamblemode==2 ) ++ padapter->registrypriv.preamble = PREAMBLE_SHORT; ++ ++ *(ULONG *)poid_par_priv->information_buf = preamblemode ; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH ; ++ } ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_set_bcn_intvl_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_dedicate_probe_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len>= sizeof(ULONG)) ++ { ++ *(u64 *)poid_par_priv->information_buf = padapter->xmitpriv.tx_bytes; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH ; ++ } ++ ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len>= sizeof(ULONG)) ++ { ++ //_rtw_memcpy(*(uint *)poid_par_priv->information_buf,padapter->recvpriv.rx_icv_err,sizeof(u32)); ++ *(u64 *)poid_par_priv->information_buf = padapter->recvpriv.rx_bytes; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else ++ { ++ status = NDIS_STATUS_INVALID_LENGTH ; ++ } ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_current_tx_power_level_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_channel_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ NDIS_802_11_CONFIGURATION *pnic_Config; ++ ++ ULONG channelnum; ++ ++ _func_enter_; ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if ( (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) ++ pnic_Config = &pmlmepriv->cur_network.network.Configuration; ++ else ++ pnic_Config = &padapter->registrypriv.dev_network.Configuration; ++ ++ channelnum = pnic_Config->DSConfig; ++ *(ULONG *)poid_par_priv->information_buf = channelnum; ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ _func_exit_; ++ ++ ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_key_mismatch_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_supported_wireless_mode_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ULONG ulInfo = 0 ; ++ //DEBUG_ERR(("<**********************oid_rt_supported_wireless_mode_hdl \n")); ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if(poid_par_priv->information_buf_len >= sizeof(ULONG)){ ++ ulInfo |= 0x0100; //WIRELESS_MODE_B ++ ulInfo |= 0x0200; //WIRELESS_MODE_G ++ ulInfo |= 0x0400; //WIRELESS_MODE_A ++ ++ *(ULONG *) poid_par_priv->information_buf = ulInfo; ++ //DEBUG_ERR(("<===oid_rt_supported_wireless_mode %x\n",ulInfo)); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } ++ else{ ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_channel_list_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_scan_in_progress_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++ ++ ++NDIS_STATUS oid_rt_forced_data_rate_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++NDIS_STATUS oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++NDIS_STATUS oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++//************** oid_rtl_seg_01_01 section end ************** ++ ++//************** oid_rtl_seg_01_03 section start ************** ++NDIS_STATUS oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++NDIS_STATUS oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++NDIS_STATUS oid_rt_ap_supported_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ return status; ++} ++NDIS_STATUS oid_rt_ap_set_passphrase_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++ ++//************** oid_rtl_seg_01_03 section end ************** ++ ++//**************** oid_rtl_seg_01_11 section start **************** ++NDIS_STATUS oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ _irqL oldirql; ++ _func_enter_; ++ //DEBUG_ERR(("<**********************oid_rt_pro_rf_write_registry_hdl \n")); ++ if(poid_par_priv->type_of_oid != SET_OID) //QUERY_OID ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ _irqlevel_changed_(&oldirql,LOWER); ++ if(poid_par_priv->information_buf_len== (sizeof(unsigned long)*3)) ++ { ++ //RegOffsetValue - The offset of RF register to write. ++ //RegDataWidth - The data width of RF register to write. ++ //RegDataValue - The value to write. ++ //RegOffsetValue = *((unsigned long*)InformationBuffer); ++ //RegDataWidth = *((unsigned long*)InformationBuffer+1); ++ //RegDataValue = *((unsigned long*)InformationBuffer+2); ++ if(!rtw_setrfreg_cmd(Adapter, ++ *(unsigned char*)poid_par_priv->information_buf, ++ (unsigned long)(*((unsigned long*)poid_par_priv->information_buf+2)))) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++ } ++ else{ ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ _irqlevel_changed_(&oldirql,RAISE); ++ _func_exit_; ++ ++ return status; ++} ++ ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ _irqL oldirql; ++ _func_enter_; ++ ++ //DEBUG_ERR(("<**********************oid_rt_pro_rf_read_registry_hdl \n")); ++ if(poid_par_priv->type_of_oid != SET_OID) //QUERY_OID ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ _irqlevel_changed_(&oldirql,LOWER); ++ if(poid_par_priv->information_buf_len== (sizeof(unsigned long)*3)) ++ { ++ if(Adapter->mppriv.act_in_progress == _TRUE) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ else ++ { ++ //init workparam ++ Adapter->mppriv.act_in_progress = _TRUE; ++ Adapter->mppriv.workparam.bcompleted= _FALSE; ++ Adapter->mppriv.workparam.act_type = MPT_READ_RF; ++ Adapter->mppriv.workparam.io_offset = *(unsigned long*)poid_par_priv->information_buf; ++ Adapter->mppriv.workparam.io_value = 0xcccccccc; ++ ++ //RegOffsetValue - The offset of RF register to read. ++ //RegDataWidth - The data width of RF register to read. ++ //RegDataValue - The value to read. ++ //RegOffsetValue = *((unsigned long*)InformationBuffer); ++ //RegDataWidth = *((unsigned long*)InformationBuffer+1); ++ //RegDataValue = *((unsigned long*)InformationBuffer+2); ++ if(!rtw_getrfreg_cmd(Adapter, ++ *(unsigned char*)poid_par_priv->information_buf, ++ (unsigned char*)&Adapter->mppriv.workparam.io_value)) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ } ++ ++ ++ } ++ else { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ _irqlevel_changed_(&oldirql,RAISE); ++ _func_exit_; ++#endif ++ return status; ++} ++ ++//**************** oid_rtl_seg_01_11 section end**************** ++ ++ ++//************** oid_rtl_seg_03_00 section start ************** ++enum _CONNECT_STATE_{ ++ CHECKINGSTATUS, ++ ASSOCIATED, ++ ADHOCMODE, ++ NOTASSOCIATED ++}; ++ ++NDIS_STATUS oid_rt_get_connect_state_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ ULONG ulInfo; ++ ++ if(poid_par_priv->type_of_oid != QUERY_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ // nStatus==0 CheckingStatus ++ // nStatus==1 Associated ++ // nStatus==2 AdHocMode ++ // nStatus==3 NotAssociated ++ ++ if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) ++ ulInfo = CHECKINGSTATUS; ++ else if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ ulInfo = ASSOCIATED; ++ else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)== _TRUE) ++ ulInfo = ADHOCMODE; ++ else ++ ulInfo = NOTASSOCIATED ; ++ ++ *(ULONG *)poid_par_priv->information_buf = ulInfo; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++#if 0 ++ // Rearrange the order to let the UI still shows connection when scan is in progress ++ RT_TRACE(COMP_OID_QUERY, DBG_LOUD, ("===> Query OID_RT_GET_CONNECT_STATE.\n")); ++ if(pMgntInfo->mAssoc) ++ ulInfo = 1; ++ else if(pMgntInfo->mIbss) ++ ulInfo = 2; ++ else if(pMgntInfo->bScanInProgress) ++ ulInfo = 0; ++ else ++ ulInfo = 3; ++ ulInfoLen = sizeof(ULONG); ++ RT_TRACE(COMP_OID_QUERY, DBG_LOUD, ("<=== Query OID_RT_GET_CONNECT_STATE: %d\n", ulInfo)); ++#endif ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_set_default_key_id_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ if(poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ return status; ++} ++//************** oid_rtl_seg_03_00 section end ************** +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c +new file mode 100644 +index 000000000000..9d1bcf3af57a +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c +@@ -0,0 +1,1493 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_IOCTL_SET_C_ ++ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#include ++#endif ++#ifdef CONFIG_SDIO_HCI ++#include ++#endif ++ ++extern void indicate_wx_scan_complete_event(_adapter *padapter); ++ ++#define IS_MAC_ADDRESS_BROADCAST(addr) \ ++( \ ++ ( (addr[0] == 0xff) && (addr[1] == 0xff) && \ ++ (addr[2] == 0xff) && (addr[3] == 0xff) && \ ++ (addr[4] == 0xff) && (addr[5] == 0xff) ) ? _TRUE : _FALSE \ ++) ++ ++u8 rtw_validate_bssid(u8 *bssid) ++{ ++ u8 ret = _TRUE; ++ ++ if (is_zero_mac_addr(bssid) ++ || is_broadcast_mac_addr(bssid) ++ || is_multicast_mac_addr(bssid) ++ ) { ++ ret = _FALSE; ++ } ++ ++ return ret; ++} ++ ++u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid) ++{ ++ u8 i; ++ u8 ret=_TRUE; ++ ++_func_enter_; ++ ++ if (ssid->SsidLength > 32) { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ("ssid length >32\n")); ++ ret= _FALSE; ++ goto exit; ++ } ++ ++#ifdef CONFIG_VALIDATE_SSID ++ for(i = 0; i < ssid->SsidLength; i++) ++ { ++ //wifi, printable ascii code must be supported ++ if(!( (ssid->Ssid[i] >= 0x20) && (ssid->Ssid[i] <= 0x7e) )){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ("ssid has nonprintabl ascii\n")); ++ ret= _FALSE; ++ break; ++ } ++ } ++#endif /* CONFIG_VALIDATE_SSID */ ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++u8 rtw_do_join(_adapter * padapter); ++u8 rtw_do_join(_adapter * padapter) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ u8* pibss = NULL; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ u8 ret=_SUCCESS; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("\n rtw_do_join: phead = %p; plist = %p \n\n\n", phead, plist)); ++ ++ pmlmepriv->cur_network.join_res = -2; ++ ++ set_fwstate(pmlmepriv, _FW_UNDER_LINKING); ++ ++ pmlmepriv->pscanned = plist; ++ ++ pmlmepriv->to_join = _TRUE; ++ ++ if(_rtw_queue_empty(queue)== _TRUE) ++ { ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++ //when set_ssid/set_bssid for rtw_do_join(), but scanning queue is empty ++ //we try to issue sitesurvey firstly ++ ++ if (pmlmepriv->LinkDetectInfo.bBusyTraffic ==_FALSE ++ || rtw_to_roaming(padapter) > 0 ++ ) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_do_join(): site survey if scanned_queue is empty\n.")); ++ // submit site_survey_cmd ++ if(_SUCCESS!=(ret=rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0)) ) { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_do_join(): site survey return error\n.")); ++ } ++ } ++ ++ goto exit; ++ } ++ else ++ { ++ int select_ret; ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ if((select_ret=rtw_select_and_join_from_scanned_queue(pmlmepriv))==_SUCCESS) ++ { ++ pmlmepriv->to_join = _FALSE; ++ _set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT); ++ } ++ else if(ret == 2)//there is no need to wait for join ++ { ++ ret = _SUCCESS; ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ rtw_indicate_connect(padapter); ++ } ++ else ++ { ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE) ++ { ++ // submit createbss_cmd to change to a ADHOC_MASTER ++ ++ //pmlmepriv->lock has been acquired by caller... ++ WLAN_BSSID_EX *pdev_network = &(padapter->registrypriv.dev_network); ++ ++ pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE; ++ ++ pibss = padapter->registrypriv.dev_network.MacAddress; ++ ++ _rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID)); ++ _rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID)); ++ ++ rtw_update_registrypriv_dev_network(padapter); ++ ++ rtw_generate_random_ibss(pibss); ++ ++ if(rtw_createbss_cmd(padapter)!=_SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("***Error=>do_goin: rtw_createbss_cmd status FAIL*** \n ")); ++ ret = _FALSE; ++ goto exit; ++ } ++ ++ pmlmepriv->to_join = _FALSE; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("***Error=> rtw_select_and_join_from_scanned_queue FAIL under STA_Mode*** \n ")); ++ ++ } ++ else ++ { ++ // can't associate ; reset under-linking ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++#if 0 ++ if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)) ++ { ++ if(_rtw_memcmp(pmlmepriv->cur_network.network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength)) ++ { ++ // for funk to do roaming ++ // funk will reconnect, but funk will not sitesurvey before reconnect ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("for funk to do roaming")); ++ if(pmlmepriv->sitesurveyctrl.traffic_busy==_FALSE) ++ rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0); ++ } ++ ++ } ++#endif ++ ++ //when set_ssid/set_bssid for rtw_do_join(), but there are no desired bss in scanning queue ++ //we try to issue sitesurvey firstly ++ if(pmlmepriv->LinkDetectInfo.bBusyTraffic==_FALSE ++ || rtw_to_roaming(padapter) > 0 ++ ) ++ { ++ //DBG_871X("rtw_do_join() when no desired bss in scanning queue \n"); ++ if( _SUCCESS!=(ret=rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0)) ){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("do_join(): site survey return error\n.")); ++ } ++ } ++ ++ ++ } ++ ++ } ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++#ifdef PLATFORM_WINDOWS ++u8 rtw_pnp_set_power_wakeup(_adapter* padapter) ++{ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("==>rtw_pnp_set_power_wakeup!!!\n")); ++ ++ res = rtw_setstandby_cmd(padapter, 0); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<==rtw_pnp_set_power_wakeup!!!\n")); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_pnp_set_power_sleep(_adapter* padapter) ++{ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("==>rtw_pnp_set_power_sleep!!!\n")); ++ //DbgPrint("+rtw_pnp_set_power_sleep\n"); ++ ++ res = rtw_setstandby_cmd(padapter, 1); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<==rtw_pnp_set_power_sleep!!!\n")); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_set_802_11_reload_defaults(_adapter * padapter, NDIS_802_11_RELOAD_DEFAULTS reloadDefaults) ++{ ++_func_enter_; ++ ++ switch( reloadDefaults) ++ { ++ case Ndis802_11ReloadWEPKeys: ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("SetInfo OID_802_11_RELOAD_DEFAULTS : Ndis802_11ReloadWEPKeys\n")); ++ break; ++ } ++ ++ // SecClearAllKeys(Adapter); ++ // 8711 CAM was not for En/Decrypt only ++ // so, we can't clear all keys. ++ // should we disable WPAcfg (ox0088) bit 1-2, instead of clear all CAM ++ ++ //TO DO... ++ ++_func_exit_; ++ ++ return _TRUE; ++} ++ ++u8 set_802_11_test(_adapter* padapter, NDIS_802_11_TEST *test) ++{ ++ u8 ret=_TRUE; ++ ++_func_enter_; ++ ++ switch(test->Type) ++ { ++ case 1: ++ NdisMIndicateStatus(padapter->hndis_adapter, NDIS_STATUS_MEDIA_SPECIFIC_INDICATION, (PVOID)&test->AuthenticationEvent, test->Length - 8); ++ NdisMIndicateStatusComplete(padapter->hndis_adapter); ++ break; ++ ++ case 2: ++ NdisMIndicateStatus(padapter->hndis_adapter, NDIS_STATUS_MEDIA_SPECIFIC_INDICATION, (PVOID)&test->RssiTrigger, sizeof(NDIS_802_11_RSSI)); ++ NdisMIndicateStatusComplete(padapter->hndis_adapter); ++ break; ++ ++ default: ++ ret=_FALSE; ++ break; ++ } ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++u8 rtw_set_802_11_pmkid(_adapter* padapter, NDIS_802_11_PMKID *pmkid) ++{ ++ u8 ret=_SUCCESS; ++ ++ return ret; ++} ++ ++#endif ++ ++u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid) ++{ ++ _irqL irqL; ++ u8 status=_SUCCESS; ++ u32 cur_time = 0; ++ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_, ++ ("+rtw_set_802_11_bssid: bssid="MAC_FMT"\n", MAC_ARG(bssid) )); ++ ++ if ((bssid[0]==0x00 && bssid[1]==0x00 && bssid[2]==0x00 && bssid[3]==0x00 && bssid[4]==0x00 &&bssid[5]==0x00) || ++ (bssid[0]==0xFF && bssid[1]==0xFF && bssid[2]==0xFF && bssid[3]==0xFF && bssid[4]==0xFF &&bssid[5]==0xFF)) ++ { ++ status = _FAIL; ++ goto exit; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ ++ DBG_871X("Set BSSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv)); ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ goto handle_tkip_countermeasure; ++ } else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) { ++ goto release_mlme_lock; ++ } ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("set_bssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n")); ++ ++ if (_rtw_memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid, ETH_ALEN) == _TRUE) ++ { ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE) ++ goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again. ++ } else { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set BSSID not the same bssid\n")); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_bssid="MAC_FMT"\n", MAC_ARG(bssid) )); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("cur_bssid="MAC_FMT"\n", MAC_ARG(pmlmepriv->cur_network.network.MacAddress) )); ++ ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ rtw_indicate_disconnect(padapter); ++ ++ rtw_free_assoc_resources(padapter, 1); ++ ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) { ++ _clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE); ++ set_fwstate(pmlmepriv, WIFI_ADHOC_STATE); ++ } ++ } ++ } ++ ++handle_tkip_countermeasure: ++ if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) { ++ status = _FAIL; ++ goto release_mlme_lock; ++ } ++ ++ _rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN); ++ pmlmepriv->assoc_by_bssid=_TRUE; ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ pmlmepriv->to_join = _TRUE; ++ } ++ else { ++ status = rtw_do_join(padapter); ++ } ++ ++release_mlme_lock: ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++exit: ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ++ ("rtw_set_802_11_bssid: status=%d\n", status)); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++u8 rtw_set_802_11_ssid(_adapter* padapter, NDIS_802_11_SSID *ssid) ++{ ++ _irqL irqL; ++ u8 status = _SUCCESS; ++ u32 cur_time = 0; ++ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *pnetwork = &pmlmepriv->cur_network; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_, ++ ("+rtw_set_802_11_ssid: ssid=[%s] fw_state=0x%08x\n", ++ ssid->Ssid, get_fwstate(pmlmepriv))); ++ ++ if(padapter->hw_init_completed==_FALSE){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ++ ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n")); ++ status = _FAIL; ++ goto exit; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ DBG_871X("Set SSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv)); ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ goto handle_tkip_countermeasure; ++ } else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) { ++ goto release_mlme_lock; ++ } ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ++ ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n")); ++ ++ if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) && ++ (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE)) ++ { ++ if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE)) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ++ ("Set SSID is the same ssid, fw_state=0x%08x\n", ++ get_fwstate(pmlmepriv))); ++ ++ if(rtw_is_same_ibss(padapter, pnetwork) == _FALSE) ++ { ++ //if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ rtw_indicate_disconnect(padapter); ++ ++ rtw_free_assoc_resources(padapter, 1); ++ ++ if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) { ++ _clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE); ++ set_fwstate(pmlmepriv, WIFI_ADHOC_STATE); ++ } ++ } ++ else ++ { ++ goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again. ++ } ++ } ++#ifdef CONFIG_LPS ++ else { ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1); ++ } ++#endif ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n")); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength)); ++ ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ rtw_indicate_disconnect(padapter); ++ ++ rtw_free_assoc_resources(padapter, 1); ++ ++ if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) { ++ _clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE); ++ set_fwstate(pmlmepriv, WIFI_ADHOC_STATE); ++ } ++ } ++ } ++ ++handle_tkip_countermeasure: ++ if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) { ++ status = _FAIL; ++ goto release_mlme_lock; ++ } ++ ++ if (rtw_validate_ssid(ssid) == _FALSE) { ++ status = _FAIL; ++ goto release_mlme_lock; ++ } ++ ++ _rtw_memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID)); ++ pmlmepriv->assoc_by_bssid=_FALSE; ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ pmlmepriv->to_join = _TRUE; ++ } ++ else { ++ status = rtw_do_join(padapter); ++ } ++ ++release_mlme_lock: ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++exit: ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ++ ("-rtw_set_802_11_ssid: status=%d\n", status)); ++ ++_func_exit_; ++ ++ return status; ++ ++} ++ ++u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid) ++{ ++ _irqL irqL; ++ u8 status = _SUCCESS; ++ u32 cur_time = 0; ++ bool bssid_valid = _TRUE; ++ bool ssid_valid = _TRUE; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ if (!ssid || rtw_validate_ssid(ssid) == _FALSE) ++ ssid_valid = _FALSE; ++ ++ if (!bssid || rtw_validate_bssid(bssid) == _FALSE) ++ bssid_valid = _FALSE; ++ ++ if (ssid_valid == _FALSE && bssid_valid == _FALSE) { ++ DBG_871X(FUNC_ADPT_FMT" ssid:%p, ssid_valid:%d, bssid:%p, bssid_valid:%d\n", ++ FUNC_ADPT_ARG(padapter), ssid, ssid_valid, bssid, bssid_valid); ++ status = _FAIL; ++ goto exit; ++ } ++ ++ if(padapter->hw_init_completed==_FALSE){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ++ ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n")); ++ status = _FAIL; ++ goto exit; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT" fw_state=0x%08x\n", ++ FUNC_ADPT_ARG(padapter), get_fwstate(pmlmepriv)); ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ goto handle_tkip_countermeasure; ++ } else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) { ++ goto release_mlme_lock; ++ } ++ ++handle_tkip_countermeasure: ++ if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) { ++ status = _FAIL; ++ goto release_mlme_lock; ++ } ++ ++ if (ssid && ssid_valid) ++ _rtw_memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID)); ++ ++ if (bssid && bssid_valid) { ++ _rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN); ++ pmlmepriv->assoc_by_bssid = _TRUE; ++ } ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ pmlmepriv->to_join = _TRUE; ++ } ++ else { ++ status = rtw_do_join(padapter); ++ } ++ ++release_mlme_lock: ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++ return status; ++} ++ ++/* ++rtw_set_802_11_infrastructure_mode(~) ++ ### NOTE:#### (!!!!) ++ MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock and scanned_queue->lock in sequence ++*/ ++u8 rtw_set_802_11_infrastructure_mode(_adapter* padapter, ++ NDIS_802_11_NETWORK_INFRASTRUCTURE networktype) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *cur_network = &pmlmepriv->cur_network; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE* pold_state = &(cur_network->network.InfrastructureMode); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_notice_, ++ ("+rtw_set_802_11_infrastructure_mode: old=%d new=%d fw_state=0x%08x\n", ++ *pold_state, networktype, get_fwstate(pmlmepriv))); ++ ++ if(*pold_state != networktype) ++ { ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,(" change mode!")); ++ //DBG_871X("change mode, old_mode=%d, new_mode=%d, fw_state=0x%x\n", *pold_state, networktype, get_fwstate(pmlmepriv)); ++ ++ if(*pold_state==Ndis802_11APMode) ++ { ++ //change to other mode from Ndis802_11APMode ++ cur_network->join_res = -1; ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ stop_ap_mode(padapter); ++#endif ++ } ++ ++ if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||(*pold_state==Ndis802_11IBSS)) ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ ++ if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)== _TRUE) ) ++ rtw_free_assoc_resources(padapter, 0); ++ ++ if((*pold_state == Ndis802_11Infrastructure) ||(*pold_state == Ndis802_11IBSS)) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ rtw_indicate_disconnect(padapter); //will clr Linked_state; before this function, we must have chked whether issue dis-assoc_cmd or not ++ } ++ } ++ ++ *pold_state = networktype; ++ ++ _clr_fwstate_(pmlmepriv, ~WIFI_NULL_STATE); ++ ++ switch(networktype) ++ { ++ case Ndis802_11IBSS: ++ set_fwstate(pmlmepriv, WIFI_ADHOC_STATE); ++ break; ++ ++ case Ndis802_11Infrastructure: ++ set_fwstate(pmlmepriv, WIFI_STATION_STATE); ++ break; ++ ++ case Ndis802_11APMode: ++ set_fwstate(pmlmepriv, WIFI_AP_STATE); ++#ifdef CONFIG_NATIVEAP_MLME ++ start_ap_mode(padapter); ++ //rtw_indicate_connect(padapter); ++#endif ++ ++ break; ++ ++ case Ndis802_11AutoUnknown: ++ case Ndis802_11InfrastructureMax: ++ break; ++ } ++ ++ //SecClearAllKeys(adapter); ++ ++ //RT_TRACE(COMP_OID_SET, DBG_LOUD, ("set_infrastructure: fw_state:%x after changing mode\n", ++ // get_fwstate(pmlmepriv) )); ++ ++ } ++ ++_func_exit_; ++ ++ return _TRUE; ++} ++ ++ ++u8 rtw_set_802_11_disassociate(_adapter *padapter) ++{ ++ _irqL irqL; ++ struct mlme_priv * pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_disassociate: rtw_indicate_disconnect\n")); ++ ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ rtw_indicate_disconnect(padapter); ++ //modify for CONFIG_IEEE80211W, none 11w can use it ++ rtw_free_assoc_resources_cmd(padapter); ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++_func_exit_; ++ ++ return _TRUE; ++} ++ ++u8 rtw_set_802_11_bssid_list_scan(_adapter* padapter, NDIS_802_11_SSID *pssid, int ssid_max_num) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv= &padapter->mlmepriv; ++ u8 res=_TRUE; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("+rtw_set_802_11_bssid_list_scan(), fw_state=%x\n", get_fwstate(pmlmepriv))); ++ ++ if (padapter == NULL) { ++ res=_FALSE; ++ goto exit; ++ } ++ if (padapter->hw_init_completed==_FALSE){ ++ res = _FALSE; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n===rtw_set_802_11_bssid_list_scan:hw_init_completed==_FALSE===\n")); ++ goto exit; ++ } ++ ++ if ((check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) || ++ (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE)) ++ { ++ // Scan or linking is in progress, do nothing. ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_bssid_list_scan fail since fw_state = %x\n", get_fwstate(pmlmepriv))); ++ res = _TRUE; ++ ++ if(check_fwstate(pmlmepriv, (_FW_UNDER_SURVEY|_FW_UNDER_LINKING))== _TRUE){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n###_FW_UNDER_SURVEY|_FW_UNDER_LINKING\n\n")); ++ } else { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n###pmlmepriv->sitesurveyctrl.traffic_busy==_TRUE\n\n")); ++ } ++ } else { ++ if (rtw_is_scan_deny(padapter)) { ++ DBG_871X(FUNC_ADPT_FMT": scan deny\n", FUNC_ADPT_ARG(padapter)); ++ indicate_wx_scan_complete_event(padapter); ++ return _SUCCESS; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ res = rtw_sitesurvey_cmd(padapter, pssid, ssid_max_num, NULL, 0); ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ } ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtw_set_802_11_authentication_mode(_adapter* padapter, NDIS_802_11_AUTHENTICATION_MODE authmode) ++{ ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ int res; ++ u8 ret; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_802_11_auth.mode(): mode=%x\n", authmode)); ++ ++ psecuritypriv->ndisauthtype=authmode; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_authentication_mode:psecuritypriv->ndisauthtype=%d", psecuritypriv->ndisauthtype)); ++ ++ if(psecuritypriv->ndisauthtype>3) ++ psecuritypriv->dot11AuthAlgrthm=dot11AuthAlgrthm_8021X; ++ ++ res=rtw_set_auth(padapter,psecuritypriv); ++ ++ if(res==_SUCCESS) ++ ret=_TRUE; ++ else ++ ret=_FALSE; ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++u8 rtw_set_802_11_add_wep(_adapter* padapter, NDIS_802_11_WEP *wep){ ++ ++ u8 bdefaultkey; ++ u8 btransmitkey; ++ sint keyid,res; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ u8 ret=_SUCCESS; ++ ++_func_enter_; ++ ++ bdefaultkey=(wep->KeyIndex & 0x40000000) > 0 ? _FALSE : _TRUE; //for ??? ++ btransmitkey= (wep->KeyIndex & 0x80000000) > 0 ? _TRUE : _FALSE; //for ??? ++ keyid=wep->KeyIndex & 0x3fffffff; ++ ++ if(keyid>4) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("MgntActrtw_set_802_11_add_wep:keyid>4=>fail\n")); ++ ret=_FALSE; ++ goto exit; ++ } ++ ++ switch(wep->KeyLength) ++ { ++ case 5: ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP40_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength=5\n")); ++ break; ++ case 13: ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP104_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength=13\n")); ++ break; ++ default: ++ psecuritypriv->dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength!=5 or 13\n")); ++ break; ++ } ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_wep:befor memcpy, wep->KeyLength=0x%x wep->KeyIndex=0x%x keyid =%x\n",wep->KeyLength,wep->KeyIndex,keyid)); ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[keyid].skey[0]),&(wep->KeyMaterial),wep->KeyLength); ++ ++ psecuritypriv->dot11DefKeylen[keyid]=wep->KeyLength; ++ ++ psecuritypriv->dot11PrivacyKeyIndex=keyid; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_wep:security key material : %x %x %x %x %x %x %x %x %x %x %x %x %x \n", ++ psecuritypriv->dot11DefKey[keyid].skey[0],psecuritypriv->dot11DefKey[keyid].skey[1],psecuritypriv->dot11DefKey[keyid].skey[2], ++ psecuritypriv->dot11DefKey[keyid].skey[3],psecuritypriv->dot11DefKey[keyid].skey[4],psecuritypriv->dot11DefKey[keyid].skey[5], ++ psecuritypriv->dot11DefKey[keyid].skey[6],psecuritypriv->dot11DefKey[keyid].skey[7],psecuritypriv->dot11DefKey[keyid].skey[8], ++ psecuritypriv->dot11DefKey[keyid].skey[9],psecuritypriv->dot11DefKey[keyid].skey[10],psecuritypriv->dot11DefKey[keyid].skey[11], ++ psecuritypriv->dot11DefKey[keyid].skey[12])); ++ ++ res=rtw_set_key(padapter,psecuritypriv, keyid, 1); ++ ++ if(res==_FAIL) ++ ret= _FALSE; ++exit: ++ ++_func_exit_; ++ ++ return ret; ++ ++} ++ ++u8 rtw_set_802_11_remove_wep(_adapter* padapter, u32 keyindex){ ++ ++ u8 ret=_SUCCESS; ++ ++_func_enter_; ++ ++ if (keyindex >= 0x80000000 || padapter == NULL){ ++ ++ ret=_FALSE; ++ goto exit; ++ ++ } ++ else ++ { ++ int res; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ if( keyindex < 4 ){ ++ ++ _rtw_memset(&psecuritypriv->dot11DefKey[keyindex], 0, 16); ++ ++ res=rtw_set_key(padapter,psecuritypriv,keyindex, 0); ++ ++ psecuritypriv->dot11DefKeylen[keyindex]=0; ++ ++ if(res==_FAIL) ++ ret=_FAIL; ++ ++ } ++ else ++ { ++ ret=_FAIL; ++ } ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++ ++} ++ ++u8 rtw_set_802_11_add_key(_adapter* padapter, NDIS_802_11_KEY *key){ ++ ++ uint encryptionalgo; ++ u8 * pbssid; ++ struct sta_info *stainfo; ++ u8 bgroup = _FALSE; ++ u8 bgrouptkey = _FALSE;//can be remove later ++ u8 ret=_SUCCESS; ++ ++_func_enter_; ++ ++ if (((key->KeyIndex & 0x80000000) == 0) && ((key->KeyIndex & 0x40000000) > 0)){ ++ ++ // It is invalid to clear bit 31 and set bit 30. If the miniport driver encounters this combination, ++ // it must fail the request and return NDIS_STATUS_INVALID_DATA. ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key: ((key->KeyIndex & 0x80000000) == 0)[=%d] ",(int)(key->KeyIndex & 0x80000000) == 0)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key:((key->KeyIndex & 0x40000000) > 0)[=%d]" , (int)(key->KeyIndex & 0x40000000) > 0)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key: key->KeyIndex=%d \n" ,(int)key->KeyIndex)); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ if(key->KeyIndex & 0x40000000) ++ { ++ // Pairwise key ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ Pairwise key +++++\n")); ++ ++ pbssid=get_bssid(&padapter->mlmepriv); ++ stainfo=rtw_get_stainfo(&padapter->stapriv, pbssid); ++ ++ if((stainfo!=NULL)&&(padapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY:( stainfo!=NULL)&&(Adapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)\n")); ++ encryptionalgo=stainfo->dot118021XPrivacy; ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: stainfo==NULL)||(Adapter->securitypriv.dot11AuthAlgrthm!=dot11AuthAlgrthm_8021X)\n")); ++ encryptionalgo=padapter->securitypriv.dot11PrivacyAlgrthm; ++ } ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (encryptionalgo ==%d)!\n",encryptionalgo )); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (Adapter->securitypriv.dot11PrivacyAlgrthm ==%d)!\n",padapter->securitypriv.dot11PrivacyAlgrthm)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (Adapter->securitypriv.dot11AuthAlgrthm ==%d)!\n",padapter->securitypriv.dot11AuthAlgrthm)); ++ ++ if((stainfo!=NULL)){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (stainfo->dot118021XPrivacy ==%d)!\n", stainfo->dot118021XPrivacy)); ++ } ++ ++ if(key->KeyIndex & 0x000000FF){ ++ // The key index is specified in the lower 8 bits by values of zero to 255. ++ // The key index should be set to zero for a Pairwise key, and the driver should fail with ++ // NDIS_STATUS_INVALID_DATA if the lower 8 bits is not zero ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" key->KeyIndex & 0x000000FF.\n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ // check BSSID ++ if (IS_MAC_ADDRESS_BROADCAST(key->BSSID) == _TRUE){ ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("MacAddr_isBcst(key->BSSID)\n")); ++ ret= _FALSE; ++ goto exit; ++ } ++ ++ // Check key length for TKIP. ++ //if(encryptionAlgorithm == RT_ENC_TKIP_ENCRYPTION && key->KeyLength != 32) ++ if((encryptionalgo== _TKIP_)&& (key->KeyLength != 32)){ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("TKIP KeyLength:0x%x != 32\n", key->KeyLength)); ++ ret=_FAIL; ++ goto exit; ++ ++ } ++ ++ // Check key length for AES. ++ if((encryptionalgo== _AES_)&& (key->KeyLength != 16)) { ++ // For our supplicant, EAPPkt9x.vxd, cannot differentiate TKIP and AES case. ++ if(key->KeyLength == 32) { ++ key->KeyLength = 16; ++ } else { ++ ret= _FAIL; ++ goto exit; ++ } ++ } ++ ++ // Check key length for WEP. For NDTEST, 2005.01.27, by rcnjko. ++ if( (encryptionalgo== _WEP40_|| encryptionalgo== _WEP104_) && (key->KeyLength != 5 || key->KeyLength != 13)) { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("WEP KeyLength:0x%x != 5 or 13\n", key->KeyLength)); ++ ret=_FAIL; ++ goto exit; ++ } ++ ++ bgroup = _FALSE; ++ ++ // Check the pairwise key. Added by Annie, 2005-07-06. ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("[Pairwise Key set]\n")); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key index: 0x%8x(0x%8x)\n", key->KeyIndex,(key->KeyIndex&0x3))); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key Length: %d\n", key->KeyLength)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")); ++ ++ } ++ else ++ { ++ // Group key - KeyIndex(BIT30==0) ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ Group key +++++\n")); ++ ++ ++ // when add wep key through add key and didn't assigned encryption type before ++ if((padapter->securitypriv.ndisauthtype<=3)&&(padapter->securitypriv.dot118021XGrpPrivacy==0)) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("keylen=%d( Adapter->securitypriv.dot11PrivacyAlgrthm=%x )padapter->securitypriv.dot118021XGrpPrivacy(%x)\n", key->KeyLength,padapter->securitypriv.dot11PrivacyAlgrthm,padapter->securitypriv.dot118021XGrpPrivacy)); ++ ++ switch(key->KeyLength) ++ { ++ case 5: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u\n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength)); ++ break; ++ case 13: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u\n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength)); ++ break; ++ default: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u \n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength)); ++ break; ++ } ++ ++ encryptionalgo=padapter->securitypriv.dot11PrivacyAlgrthm; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" Adapter->securitypriv.dot11PrivacyAlgrthm=%x\n", padapter->securitypriv.dot11PrivacyAlgrthm)); ++ ++ } ++ else ++ { ++ encryptionalgo=padapter->securitypriv.dot118021XGrpPrivacy; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("( Adapter->securitypriv.dot11PrivacyAlgrthm=%x )encryptionalgo(%x)=padapter->securitypriv.dot118021XGrpPrivacy(%x)keylen=%d\n", padapter->securitypriv.dot11PrivacyAlgrthm,encryptionalgo,padapter->securitypriv.dot118021XGrpPrivacy,key->KeyLength)); ++ ++ } ++ ++ if((check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE)==_TRUE) && (IS_MAC_ADDRESS_BROADCAST(key->BSSID) == _FALSE)) { ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" IBSS but BSSID is not Broadcast Address.\n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ // Check key length for TKIP ++ if((encryptionalgo== _TKIP_) && (key->KeyLength != 32)) { ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" TKIP GTK KeyLength:%u != 32\n", key->KeyLength)); ++ ret= _FAIL; ++ goto exit; ++ ++ } else if(encryptionalgo== _AES_ && (key->KeyLength != 16 && key->KeyLength != 32) ) { ++ ++ // Check key length for AES ++ // For NDTEST, we allow keylen=32 in this case. 2005.01.27, by rcnjko. ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<=== SetInfo, OID_802_11_ADD_KEY: AES GTK KeyLength:%u != 16 or 32\n", key->KeyLength)); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ // Change the key length for EAPPkt9x.vxd. Added by Annie, 2005-11-03. ++ if((encryptionalgo== _AES_) && (key->KeyLength == 32) ) { ++ key->KeyLength = 16; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("AES key length changed: %u\n", key->KeyLength) ); ++ } ++ ++ if(key->KeyIndex & 0x8000000) {//error ??? 0x8000_0000 ++ bgrouptkey = _TRUE; ++ } ++ ++ if((check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE)==_TRUE)&&(check_fwstate(&padapter->mlmepriv, _FW_LINKED)==_TRUE)) ++ { ++ bgrouptkey = _TRUE; ++ } ++ ++ bgroup = _TRUE; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n") ); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("[Group Key set]\n") ); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")) ; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key index: 0x%8x(0x%8x)\n", key->KeyIndex,(key->KeyIndex&0x3))); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key Length: %d\n", key->KeyLength)) ; ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")); ++ ++ } ++ ++ // If WEP encryption algorithm, just call rtw_set_802_11_add_wep(). ++ if((padapter->securitypriv.dot11AuthAlgrthm !=dot11AuthAlgrthm_8021X)&&(encryptionalgo== _WEP40_ || encryptionalgo== _WEP104_)) ++ { ++ u8 ret; ++ u32 keyindex; ++ u32 len = FIELD_OFFSET(NDIS_802_11_KEY, KeyMaterial) + key->KeyLength; ++ NDIS_802_11_WEP *wep = &padapter->securitypriv.ndiswep; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ WEP key +++++\n")); ++ ++ wep->Length = len; ++ keyindex = key->KeyIndex&0x7fffffff; ++ wep->KeyIndex = keyindex ; ++ wep->KeyLength = key->KeyLength; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY:Before memcpy \n")); ++ ++ _rtw_memcpy(wep->KeyMaterial, key->KeyMaterial, key->KeyLength); ++ _rtw_memcpy(&(padapter->securitypriv.dot11DefKey[keyindex].skey[0]), key->KeyMaterial, key->KeyLength); ++ ++ padapter->securitypriv.dot11DefKeylen[keyindex]=key->KeyLength; ++ padapter->securitypriv.dot11PrivacyKeyIndex=keyindex; ++ ++ ret = rtw_set_802_11_add_wep(padapter, wep); ++ ++ goto exit; ++ ++ } ++ ++ if(key->KeyIndex & 0x20000000){ ++ // SetRSC ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ SetRSC+++++\n")); ++ if(bgroup == _TRUE) ++ { ++ NDIS_802_11_KEY_RSC keysrc=key->KeyRSC & 0x00FFFFFFFFFFFFULL; ++ _rtw_memcpy(&padapter->securitypriv.dot11Grprxpn, &keysrc, 8); ++ } ++ else ++ { ++ NDIS_802_11_KEY_RSC keysrc=key->KeyRSC & 0x00FFFFFFFFFFFFULL; ++ _rtw_memcpy(&padapter->securitypriv.dot11Grptxpn, &keysrc, 8); ++ } ++ ++ } ++ ++ // Indicate this key idx is used for TX ++ // Save the key in KeyMaterial ++ if(bgroup == _TRUE) // Group transmit key ++ { ++ int res; ++ ++ if(bgrouptkey == _TRUE) ++ { ++ padapter->securitypriv.dot118021XGrpKeyid=(u8)key->KeyIndex; ++ } ++ ++ if((key->KeyIndex&0x3) == 0){ ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memset(&padapter->securitypriv.dot118021XGrpKey[(u8)((key->KeyIndex) & 0x03)], 0, 16); ++ _rtw_memset(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], 0, 16); ++ _rtw_memset(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], 0, 16); ++ ++ if((key->KeyIndex & 0x10000000)) ++ { ++ _rtw_memcpy(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 16, 8); ++ _rtw_memcpy(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 24, 8); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rx mic :0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[0],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[1], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[2],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[3], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[4],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[5], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[6],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[7])); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:set Group mic key!!!!!!!!\n")); ++ ++ } ++ else ++ { ++ _rtw_memcpy(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 24, 8); ++ _rtw_memcpy(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 16, 8); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rx mic :0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[0],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[1], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[2],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[3], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[4],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[5], ++ padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[6],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[7])); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:set Group mic key!!!!!!!!\n")); ++ ++ } ++ ++ //set group key by index ++ _rtw_memcpy(&padapter->securitypriv.dot118021XGrpKey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial, key->KeyLength); ++ ++ key->KeyIndex=key->KeyIndex & 0x03; ++ ++ padapter->securitypriv.binstallGrpkey=_TRUE; ++ ++ padapter->securitypriv.bcheck_grpkey=_FALSE; ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("reset group key")); ++ ++ res=rtw_set_key(padapter,&padapter->securitypriv, key->KeyIndex, 1); ++ ++ if(res==_FAIL) ++ ret= _FAIL; ++ ++ goto exit; ++ ++ } ++ else // Pairwise Key ++ { ++ u8 res; ++ ++ pbssid=get_bssid(&padapter->mlmepriv); ++ stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid ); ++ ++ if(stainfo!=NULL) ++ { ++ _rtw_memset( &stainfo->dot118021x_UncstKey, 0, 16);// clear keybuffer ++ ++ _rtw_memcpy(&stainfo->dot118021x_UncstKey, key->KeyMaterial, 16); ++ ++ if(encryptionalgo== _TKIP_) ++ { ++ padapter->securitypriv.busetkipkey=_FALSE; ++ ++ //_set_timer(&padapter->securitypriv.tkip_timer, 50); ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n ==========_set_timer\n")); ++ ++ // if TKIP, save the Receive/Transmit MIC key in KeyMaterial[128-255] ++ if((key->KeyIndex & 0x10000000)){ ++ _rtw_memcpy(&stainfo->dot11tkiptxmickey, key->KeyMaterial + 16, 8); ++ _rtw_memcpy(&stainfo->dot11tkiprxmickey, key->KeyMaterial + 24, 8); ++ ++ } else { ++ _rtw_memcpy(&stainfo->dot11tkiptxmickey, key->KeyMaterial + 24, 8); ++ _rtw_memcpy(&stainfo->dot11tkiprxmickey, key->KeyMaterial + 16, 8); ++ ++ } ++ ++ } ++ else if(encryptionalgo == _AES_) ++ { ++ ++ } ++ ++ ++ //Set key to CAM through H2C command ++ if(bgrouptkey)//never go to here ++ { ++ res=rtw_setstakey_cmd(padapter, (unsigned char *)stainfo, _FALSE); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rtw_setstakey_cmd(group)\n")); ++ } ++ else{ ++ res=rtw_setstakey_cmd(padapter, (unsigned char *)stainfo, _TRUE); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rtw_setstakey_cmd(unicast)\n")); ++ } ++ ++ if(res ==_FALSE) ++ ret= _FAIL; ++ ++ } ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++u8 rtw_set_802_11_remove_key(_adapter* padapter, NDIS_802_11_REMOVE_KEY *key){ ++ ++ uint encryptionalgo; ++ u8 * pbssid; ++ struct sta_info *stainfo; ++ u8 bgroup = (key->KeyIndex & 0x4000000) > 0 ? _FALSE: _TRUE; ++ u8 keyIndex = (u8)key->KeyIndex & 0x03; ++ u8 ret=_SUCCESS; ++ ++_func_enter_; ++ ++ if ((key->KeyIndex & 0xbffffffc) > 0) { ++ ret=_FAIL; ++ goto exit; ++ } ++ ++ if (bgroup == _TRUE) { ++ encryptionalgo= padapter->securitypriv.dot118021XGrpPrivacy; ++ // clear group key by index ++ //NdisZeroMemory(Adapter->MgntInfo.SecurityInfo.KeyBuf[keyIndex], MAX_WEP_KEY_LEN); ++ //Adapter->MgntInfo.SecurityInfo.KeyLen[keyIndex] = 0; ++ ++ _rtw_memset(&padapter->securitypriv.dot118021XGrpKey[keyIndex], 0, 16); ++ ++ //! \todo Send a H2C Command to Firmware for removing this Key in CAM Entry. ++ ++ } else { ++ ++ pbssid=get_bssid(&padapter->mlmepriv); ++ stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid ); ++ if(stainfo !=NULL){ ++ encryptionalgo=stainfo->dot118021XPrivacy; ++ ++ // clear key by BSSID ++ _rtw_memset(&stainfo->dot118021x_UncstKey, 0, 16); ++ ++ //! \todo Send a H2C Command to Firmware for disable this Key in CAM Entry. ++ ++ } ++ else{ ++ ret= _FAIL; ++ goto exit; ++ } ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return _TRUE; ++ ++} ++ ++/* ++* rtw_get_cur_max_rate - ++* @adapter: pointer to _adapter structure ++* ++* Return 0 or 100Kbps ++*/ ++u16 rtw_get_cur_max_rate(_adapter *adapter) ++{ ++ int i = 0; ++ u8 *p; ++ u16 rate = 0, max_rate = 0; ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct registry_priv *pregistrypriv = &adapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network; ++#ifdef CONFIG_80211N_HT ++ struct rtw_ieee80211_ht_cap *pht_capie; ++ u8 rf_type = 0; ++ u8 bw_40MHz=0, short_GI_20=0, short_GI_40=0; ++ u16 mcs_rate=0; ++ u32 ht_ielen = 0; ++#endif ++ ++#ifdef CONFIG_MP_INCLUDED ++ if (adapter->registrypriv.mp_mode == 1) ++ { ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ return 0; ++ } ++#endif ++ ++ if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) ++ && (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE)) ++ return 0; ++ ++#ifdef CONFIG_80211N_HT ++ if (pmlmeext->cur_wireless_mode & (WIRELESS_11_24N|WIRELESS_11_5N)) { ++ p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12); ++ if(p && ht_ielen>0) ++ { ++ pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2); ++ ++ _rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2); ++ ++ //bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0; ++ //cur_bwmod is updated by beacon, pmlmeinfo is updated by association response ++ bw_40MHz = (pmlmeext->cur_bwmode && (HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH & pmlmeinfo->HT_info.infos[0])) ? 1:0; ++ ++ //short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0; ++ short_GI_20 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_20) ? 1:0; ++ short_GI_40 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_40) ? 1:0; ++ ++ rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ max_rate = rtw_mcs_rate( ++ rf_type, ++ bw_40MHz & (pregistrypriv->cbw40_enable), ++ short_GI_20, ++ short_GI_40, ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate ++ ); ++ } ++ } ++ else ++#endif //CONFIG_80211N_HT ++ { ++ while( (pcur_bss->SupportedRates[i]!=0) && (pcur_bss->SupportedRates[i]!=0xFF)) ++ { ++ rate = pcur_bss->SupportedRates[i]&0x7F; ++ if(rate>max_rate) ++ max_rate = rate; ++ i++; ++ } ++ ++ max_rate = max_rate*10/2; ++ } ++ ++ return max_rate; ++} ++ ++/* ++* rtw_set_scan_mode - ++* @adapter: pointer to _adapter structure ++* @scan_mode: ++* ++* Return _SUCCESS or _FAIL ++*/ ++int rtw_set_scan_mode(_adapter *adapter, RT_SCAN_TYPE scan_mode) ++{ ++ if(scan_mode != SCAN_ACTIVE && scan_mode != SCAN_PASSIVE) ++ return _FAIL; ++ ++ adapter->mlmepriv.scan_mode = scan_mode; ++ ++ return _SUCCESS; ++} ++ ++/* ++* rtw_set_channel_plan - ++* @adapter: pointer to _adapter structure ++* @channel_plan: ++* ++* Return _SUCCESS or _FAIL ++*/ ++int rtw_set_channel_plan(_adapter *adapter, u8 channel_plan) ++{ ++ struct registry_priv *pregistrypriv = &adapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ ++ //handle by cmd_thread to sync with scan operation ++ return rtw_set_chplan_cmd(adapter, channel_plan, 1); ++} ++ ++/* ++* rtw_set_country - ++* @adapter: pointer to _adapter structure ++* @country_code: string of country code ++* ++* Return _SUCCESS or _FAIL ++*/ ++int rtw_set_country(_adapter *adapter, const char *country_code) ++{ ++ int channel_plan = RT_CHANNEL_DOMAIN_WORLD_WIDE_5G; ++ ++ DBG_871X("%s country_code:%s\n", __func__, country_code); ++ ++ //TODO: should have a table to match country code and RT_CHANNEL_DOMAIN ++ //TODO: should consider 2-character and 3-character country code ++ if(0 == strcmp(country_code, "US")) ++ channel_plan = RT_CHANNEL_DOMAIN_FCC; ++ else if(0 == strcmp(country_code, "EU")) ++ channel_plan = RT_CHANNEL_DOMAIN_ETSI; ++ else if(0 == strcmp(country_code, "JP")) ++ channel_plan = RT_CHANNEL_DOMAIN_MKK; ++ else if(0 == strcmp(country_code, "CN")) ++ channel_plan = RT_CHANNEL_DOMAIN_CHINA; ++ else ++ DBG_871X("%s unknown country_code:%s\n", __FUNCTION__, country_code); ++ ++ return rtw_set_channel_plan(adapter, channel_plan); ++} ++ ++/* ++* rtw_set_band - ++* @adapter: pointer to _adapter structure ++* @band: band to set ++* ++* Return _SUCCESS or _FAIL ++*/ ++int rtw_set_band(_adapter *adapter, enum _BAND band) ++{ ++ if (rtw_band_valid(band)) { ++ DBG_871X(FUNC_ADPT_FMT" band:%d\n", FUNC_ADPT_ARG(adapter), band); ++ adapter->setband = band; ++ return _SUCCESS; ++ } ++ ++ DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" band:%d fail\n", FUNC_ADPT_ARG(adapter), band); ++ return _FAIL; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_iol.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_iol.c +new file mode 100644 +index 000000000000..20632d66bb4c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_iol.c +@@ -0,0 +1,262 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#include ++ ++#ifdef CONFIG_IOL ++struct xmit_frame *rtw_IOL_accquire_xmit_frame(ADAPTER *adapter) ++{ ++ struct xmit_frame *xmit_frame; ++ struct xmit_buf *xmitbuf; ++ struct pkt_attrib *pattrib; ++ struct xmit_priv *pxmitpriv = &(adapter->xmitpriv); ++ ++#if 1 ++ if ((xmit_frame = rtw_alloc_xmitframe(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s rtw_alloc_xmitframe return null\n", __FUNCTION__); ++ goto exit; ++ } ++ ++ if ((xmitbuf = rtw_alloc_xmitbuf(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s rtw_alloc_xmitbuf return null\n", __FUNCTION__); ++ rtw_free_xmitframe(pxmitpriv, xmit_frame); ++ xmit_frame=NULL; ++ goto exit; ++ } ++ ++ xmit_frame->frame_tag = MGNT_FRAMETAG; ++ xmit_frame->pxmitbuf = xmitbuf; ++ xmit_frame->buf_addr = xmitbuf->pbuf; ++ xmitbuf->priv_data = xmit_frame; ++ ++ pattrib = &xmit_frame->attrib; ++ update_mgntframe_attrib(adapter, pattrib); ++ pattrib->qsel = 0x10; ++ pattrib->pktlen = pattrib->last_txcmdsz = 0; ++ ++#else ++ if ((xmit_frame = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s alloc_mgtxmitframe return null\n", __FUNCTION__); ++ } ++ else { ++ pattrib = &xmit_frame->attrib; ++ update_mgntframe_attrib(adapter, pattrib); ++ pattrib->qsel = 0x10; ++ pattrib->pktlen = pattrib->last_txcmdsz = 0; ++ } ++#endif ++ ++exit: ++ return xmit_frame; ++} ++ ++ ++int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds, u32 cmd_len) ++{ ++ struct pkt_attrib *pattrib = &xmit_frame->attrib; ++ u16 buf_offset; ++ u32 ori_len; ++ ++//Todo: bulkout without this offset ++#ifdef CONFIG_USB_HCI ++ buf_offset = TXDESC_OFFSET; ++#else ++ buf_offset = 0; ++#endif ++ ++ ori_len = buf_offset+pattrib->pktlen; ++ ++ //check if the io_buf can accommodate new cmds ++ if(ori_len + cmd_len + 8 > MAX_XMITBUF_SZ) { ++ DBG_871X("%s %u is large than MAX_XMITBUF_SZ:%u, can't accommodate new cmds\n", __FUNCTION__ ++ , ori_len + cmd_len + 8, MAX_XMITBUF_SZ); ++ return _FAIL; ++ } ++ ++ _rtw_memcpy(xmit_frame->buf_addr + buf_offset + pattrib->pktlen, IOL_cmds, cmd_len); ++ pattrib->pktlen += cmd_len; ++ pattrib->last_txcmdsz += cmd_len; ++ ++ //DBG_871X("%s ori:%u + cmd_len:%u = %u\n", __FUNCTION__, ori_len, cmd_len, buf_offset+pattrib->pktlen); ++ ++ return _SUCCESS; ++} ++ ++int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_LLT, 0x0, 0x0}; ++ ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)page_boundary); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_WB_REG, 0x0, 0x0}; ++ ++ RTW_PUT_BE16((u8*)&cmd.address, (u16)addr); ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)value); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_WW_REG, 0x0, 0x0}; ++ ++ RTW_PUT_BE16((u8*)&cmd.address, (u16)addr); ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)value); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_WD_REG, 0x0, 0x0}; ++ u8* pos = (u8 *)&cmd; ++ ++ RTW_PUT_BE16((u8*)&cmd.address, (u16)addr); ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)value); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++#ifdef DBG_IO ++int dbg_rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 1)) ++ DBG_871X("DBG_IO %s:%d IOL_WB(0x%04x, 0x%02x)\n", caller, line, addr, value); ++ ++ return _rtw_IOL_append_WB_cmd(xmit_frame, addr, value); ++} ++ ++int dbg_rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 2)) ++ DBG_871X("DBG_IO %s:%d IOL_WW(0x%04x, 0x%04x)\n", caller, line, addr, value); ++ ++ return _rtw_IOL_append_WW_cmd(xmit_frame, addr, value); ++} ++ ++int dbg_rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value, const char *caller, const int line) ++{ ++ if (match_write_sniff_ranges(addr, 4)) ++ DBG_871X("DBG_IO %s:%d IOL_WD(0x%04x, 0x%08x)\n", caller, line, addr, value); ++ ++ return _rtw_IOL_append_WD_cmd(xmit_frame, addr, value); ++} ++#endif ++ ++int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_DELAY_US, 0x0, 0x0}; ++ ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)us); ++ ++ //DBG_871X("%s %u\n", __FUNCTION__, us); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms) ++{ ++ IOL_CMD cmd = {0x0, IOL_CMD_DELAY_MS, 0x0, 0x0}; ++ ++ RTW_PUT_BE32((u8*)&cmd.value, (u32)ms); ++ ++ //DBG_871X("%s %u\n", __FUNCTION__, ms); ++ ++ return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8); ++} ++ ++int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame) ++{ ++ struct pkt_attrib *pattrib = &xmit_frame->attrib; ++ u16 buf_offset; ++ u32 ori_len; ++ IOL_CMD end_cmd = {0x0, IOL_CMD_END, 0x0, 0x0}; ++ ++//Todo: bulkout without this offset ++#ifdef CONFIG_USB_HCI ++ buf_offset = TXDESC_OFFSET; ++#else ++ buf_offset = 0; ++#endif ++ ++ ori_len = buf_offset+pattrib->pktlen; ++ ++ //check if the io_buf can accommodate new cmds ++ if(ori_len + 8 > MAX_XMITBUF_SZ) { ++ DBG_871X("%s %u is large than MAX_XMITBUF_SZ:%u, can't accommodate end cmd\n", __FUNCTION__ ++ , ori_len + 8, MAX_XMITBUF_SZ); ++ return _FAIL; ++ } ++ ++ _rtw_memcpy(xmit_frame->buf_addr + buf_offset + pattrib->pktlen, (u8*)&end_cmd, 8); ++ pattrib->pktlen += 8; ++ pattrib->last_txcmdsz += 8; ++ ++ //DBG_871X("%s ori:%u + 8 = %u\n", __FUNCTION__ , ori_len, buf_offset+pattrib->pktlen); ++ ++ return _SUCCESS; ++} ++ ++int rtw_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms) ++{ ++ return rtw_hal_iol_cmd(adapter, xmit_frame, max_wating_ms); ++} ++ ++int rtw_IOL_exec_cmd_array_sync(PADAPTER adapter, u8 *IOL_cmds, u32 cmd_num, u32 max_wating_ms) ++{ ++ struct xmit_frame *xmit_frame; ++ ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(adapter)) == NULL) ++ return _FAIL; ++ ++ if(rtw_IOL_append_cmds(xmit_frame, IOL_cmds, cmd_num<<3) == _FAIL) ++ return _FAIL; ++ ++ return rtw_IOL_exec_cmds_sync(adapter, xmit_frame, max_wating_ms); ++} ++ ++int rtw_IOL_exec_empty_cmds_sync(ADAPTER *adapter, u32 max_wating_ms) ++{ ++ IOL_CMD end_cmd = {0x0, IOL_CMD_END, 0x0, 0x0}; ++ return rtw_IOL_exec_cmd_array_sync(adapter, (u8*)&end_cmd, 1, max_wating_ms); ++} ++ ++bool rtw_IOL_applied(ADAPTER *adapter) ++{ ++ if(adapter->registrypriv.force_iol) ++ return _TRUE; ++ ++#ifdef CONFIG_USB_HCI ++ if(!adapter_to_dvobj(adapter)->ishighspeed) ++ return _TRUE; ++#endif ++ ++ return _FALSE; ++} ++ ++#endif //CONFIG_IOL +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme.c +new file mode 100644 +index 000000000000..2dc13a43c118 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme.c +@@ -0,0 +1,3966 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_MLME_C_ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++extern void indicate_wx_scan_complete_event(_adapter *padapter); ++extern u8 rtw_do_join(_adapter * padapter); ++ ++#ifdef CONFIG_DISABLE_MCS13TO15 ++extern unsigned char MCS_rate_2R_MCS13TO15_OFF[16]; ++extern unsigned char MCS_rate_2R[16]; ++#else //CONFIG_DISABLE_MCS13TO15 ++extern unsigned char MCS_rate_2R[16]; ++#endif //CONFIG_DISABLE_MCS13TO15 ++extern unsigned char MCS_rate_1R[16]; ++ ++sint _rtw_init_mlme_priv (_adapter* padapter) ++{ ++ sint i; ++ u8 *pbuf; ++ struct wlan_network *pnetwork; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ sint res = _SUCCESS; ++ ++_func_enter_; ++ ++ // We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc(). ++ //_rtw_memset((u8 *)pmlmepriv, 0, sizeof(struct mlme_priv)); ++ ++ pmlmepriv->nic_hdl = (u8 *)padapter; ++ ++ pmlmepriv->pscanned = NULL; ++ pmlmepriv->fw_state = 0; ++ pmlmepriv->cur_network.network.InfrastructureMode = Ndis802_11AutoUnknown; ++ pmlmepriv->scan_mode=SCAN_ACTIVE;// 1: active, 0: pasive. Maybe someday we should rename this varable to "active_mode" (Jeff) ++ ++ _rtw_spinlock_init(&(pmlmepriv->lock)); ++ _rtw_init_queue(&(pmlmepriv->free_bss_pool)); ++ _rtw_init_queue(&(pmlmepriv->scanned_queue)); ++ ++ set_scanned_network_val(pmlmepriv, 0); ++ ++ _rtw_memset(&pmlmepriv->assoc_ssid,0,sizeof(NDIS_802_11_SSID)); ++ ++ pbuf = rtw_zvmalloc(MAX_BSS_CNT * (sizeof(struct wlan_network))); ++ ++ if (pbuf == NULL){ ++ res=_FAIL; ++ goto exit; ++ } ++ pmlmepriv->free_bss_buf = pbuf; ++ ++ pnetwork = (struct wlan_network *)pbuf; ++ ++ for(i = 0; i < MAX_BSS_CNT; i++) ++ { ++ _rtw_init_listhead(&(pnetwork->list)); ++ ++ rtw_list_insert_tail(&(pnetwork->list), &(pmlmepriv->free_bss_pool.queue)); ++ ++ pnetwork++; ++ } ++ ++ //allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf ++ ++ rtw_clear_scan_deny(padapter); ++ ++ rtw_init_mlme_timer(padapter); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++void rtw_mfree_mlme_priv_lock (struct mlme_priv *pmlmepriv); ++void rtw_mfree_mlme_priv_lock (struct mlme_priv *pmlmepriv) ++{ ++ _rtw_spinlock_free(&pmlmepriv->lock); ++ _rtw_spinlock_free(&(pmlmepriv->free_bss_pool.lock)); ++ _rtw_spinlock_free(&(pmlmepriv->scanned_queue.lock)); ++} ++ ++static void rtw_free_mlme_ie_data(u8 **ppie, u32 *plen) ++{ ++ if(*ppie) ++ { ++ rtw_mfree(*ppie, *plen); ++ *plen = 0; ++ *ppie=NULL; ++ } ++} ++ ++void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv) ++{ ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ rtw_buf_free(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len); ++ rtw_buf_free(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wps_beacon_ie, &pmlmepriv->wps_beacon_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wps_probe_req_ie, &pmlmepriv->wps_probe_req_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wps_probe_resp_ie, &pmlmepriv->wps_probe_resp_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wps_assoc_resp_ie, &pmlmepriv->wps_assoc_resp_ie_len); ++ ++ rtw_free_mlme_ie_data(&pmlmepriv->p2p_beacon_ie, &pmlmepriv->p2p_beacon_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->p2p_probe_req_ie, &pmlmepriv->p2p_probe_req_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->p2p_probe_resp_ie, &pmlmepriv->p2p_probe_resp_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->p2p_go_probe_resp_ie, &pmlmepriv->p2p_go_probe_resp_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->p2p_assoc_req_ie, &pmlmepriv->p2p_assoc_req_ie_len); ++#endif ++ ++#if defined(CONFIG_WFD) && defined(CONFIG_IOCTL_CFG80211) ++ rtw_free_mlme_ie_data(&pmlmepriv->wfd_beacon_ie, &pmlmepriv->wfd_beacon_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wfd_probe_req_ie, &pmlmepriv->wfd_probe_req_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wfd_probe_resp_ie, &pmlmepriv->wfd_probe_resp_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wfd_go_probe_resp_ie, &pmlmepriv->wfd_go_probe_resp_ie_len); ++ rtw_free_mlme_ie_data(&pmlmepriv->wfd_assoc_req_ie, &pmlmepriv->wfd_assoc_req_ie_len); ++#endif ++ ++} ++ ++void _rtw_free_mlme_priv (struct mlme_priv *pmlmepriv) ++{ ++_func_enter_; ++ ++ rtw_free_mlme_priv_ie_data(pmlmepriv); ++ ++ if(pmlmepriv){ ++ rtw_mfree_mlme_priv_lock (pmlmepriv); ++ ++ if (pmlmepriv->free_bss_buf) { ++ rtw_vmfree(pmlmepriv->free_bss_buf, MAX_BSS_CNT * sizeof(struct wlan_network)); ++ } ++ } ++_func_exit_; ++} ++ ++sint _rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork) ++{ ++ _irqL irqL; ++ ++_func_enter_; ++ ++ if (pnetwork == NULL) ++ goto exit; ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ rtw_list_insert_tail(&pnetwork->list, &queue->queue); ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++struct wlan_network *_rtw_dequeue_network(_queue *queue) ++{ ++ _irqL irqL; ++ ++ struct wlan_network *pnetwork; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ if (_rtw_queue_empty(queue) == _TRUE) ++ ++ pnetwork = NULL; ++ ++ else ++ { ++ pnetwork = LIST_CONTAINOR(get_next(&queue->queue), struct wlan_network, list); ++ ++ rtw_list_delete(&(pnetwork->list)); ++ } ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return pnetwork; ++} ++ ++struct wlan_network *_rtw_alloc_network(struct mlme_priv *pmlmepriv )//(_queue *free_queue) ++{ ++ _irqL irqL; ++ struct wlan_network *pnetwork; ++ _queue *free_queue = &pmlmepriv->free_bss_pool; ++ _list* plist = NULL; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&free_queue->lock, &irqL); ++ ++ if (_rtw_queue_empty(free_queue) == _TRUE) { ++ pnetwork=NULL; ++ goto exit; ++ } ++ plist = get_next(&(free_queue->queue)); ++ ++ pnetwork = LIST_CONTAINOR(plist , struct wlan_network, list); ++ ++ rtw_list_delete(&pnetwork->list); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("_rtw_alloc_network: ptr=%p\n", plist)); ++ pnetwork->network_type = 0; ++ pnetwork->fixed = _FALSE; ++ pnetwork->last_scanned = rtw_get_current_time(); ++ pnetwork->aid=0; ++ pnetwork->join_res=0; ++ ++ pmlmepriv->num_of_scanned ++; ++ ++exit: ++ _exit_critical_bh(&free_queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return pnetwork; ++} ++ ++void _rtw_free_network(struct mlme_priv *pmlmepriv ,struct wlan_network *pnetwork, u8 isfreeall) ++{ ++ u32 curr_time, delta_time; ++ u32 lifetime = SCANQUEUE_LIFETIME; ++ _irqL irqL; ++ _queue *free_queue = &(pmlmepriv->free_bss_pool); ++ ++_func_enter_; ++ ++ if (pnetwork == NULL) ++ goto exit; ++ ++ if (pnetwork->fixed == _TRUE) ++ goto exit; ++ ++ curr_time = rtw_get_current_time(); ++ ++ if ( (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)==_TRUE ) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE ) ) ++ lifetime = 1; ++ ++ if(!isfreeall) ++ { ++#ifdef PLATFORM_WINDOWS ++ ++ delta_time = (curr_time -pnetwork->last_scanned)/10; ++ ++ if(delta_time < lifetime*1000000)// unit:usec ++ { ++ goto exit; ++ } ++ ++#endif ++ ++#ifdef PLATFORM_LINUX ++ ++ delta_time = (curr_time -pnetwork->last_scanned)/HZ; ++ ++ if(delta_time < lifetime)// unit:sec ++ { ++ goto exit; ++ } ++ ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ //i think needs to check again ++ delta_time = (curr_time -pnetwork->last_scanned)/hz; ++ ++ if(delta_time < lifetime)// unit:sec ++ { ++ goto exit; ++ } ++ ++#endif ++ } ++ ++ _enter_critical_bh(&free_queue->lock, &irqL); ++ ++ rtw_list_delete(&(pnetwork->list)); ++ ++ rtw_list_insert_tail(&(pnetwork->list),&(free_queue->queue)); ++ ++ pmlmepriv->num_of_scanned --; ++ ++ ++ //DBG_871X("_rtw_free_network:SSID=%s\n", pnetwork->network.Ssid.Ssid); ++ ++ _exit_critical_bh(&free_queue->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork) ++{ ++ ++ _queue *free_queue = &(pmlmepriv->free_bss_pool); ++ ++_func_enter_; ++ ++ if (pnetwork == NULL) ++ goto exit; ++ ++ if (pnetwork->fixed == _TRUE) ++ goto exit; ++ ++ //_enter_critical(&free_queue->lock, &irqL); ++ ++ rtw_list_delete(&(pnetwork->list)); ++ ++ rtw_list_insert_tail(&(pnetwork->list), get_list_head(free_queue)); ++ ++ pmlmepriv->num_of_scanned --; ++ ++ //_exit_critical(&free_queue->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++ ++/* ++ return the wlan_network with the matching addr ++ ++ Shall be calle under atomic context... to avoid possible racing condition... ++*/ ++struct wlan_network *_rtw_find_network(_queue *scanned_queue, u8 *addr) ++{ ++ ++ //_irqL irqL; ++ _list *phead, *plist; ++ struct wlan_network *pnetwork = NULL; ++ u8 zero_addr[ETH_ALEN] = {0,0,0,0,0,0}; ++ ++_func_enter_; ++ ++ if(_rtw_memcmp(zero_addr, addr, ETH_ALEN)){ ++ pnetwork=NULL; ++ goto exit; ++ } ++ ++ //_enter_critical_bh(&scanned_queue->lock, &irqL); ++ ++ phead = get_list_head(scanned_queue); ++ plist = get_next(phead); ++ ++ while (plist != phead) ++ { ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network ,list); ++ ++ if (_rtw_memcmp(addr, pnetwork->network.MacAddress, ETH_ALEN) == _TRUE) ++ break; ++ ++ plist = get_next(plist); ++ } ++ ++ if(plist == phead) ++ pnetwork = NULL; ++ ++ //_exit_critical_bh(&scanned_queue->lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++ return pnetwork; ++ ++} ++ ++ ++void _rtw_free_network_queue(_adapter *padapter, u8 isfreeall) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ struct wlan_network *pnetwork; ++ struct mlme_priv* pmlmepriv = &padapter->mlmepriv; ++ _queue *scanned_queue = &pmlmepriv->scanned_queue; ++ ++_func_enter_; ++ ++ ++ _enter_critical_bh(&scanned_queue->lock, &irqL); ++ ++ phead = get_list_head(scanned_queue); ++ plist = get_next(phead); ++ ++ while (rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ plist = get_next(plist); ++ ++ _rtw_free_network(pmlmepriv,pnetwork, isfreeall); ++ ++ } ++ ++ _exit_critical_bh(&scanned_queue->lock, &irqL); ++ ++_func_exit_; ++ ++} ++ ++ ++ ++ ++sint rtw_if_up(_adapter *padapter) { ++ ++ sint res; ++_func_enter_; ++ ++ if( padapter->bDriverStopped || padapter->bSurpriseRemoved || ++ (check_fwstate(&padapter->mlmepriv, _FW_LINKED)== _FALSE)){ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_if_up:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ res=_FALSE; ++ } ++ else ++ res= _TRUE; ++ ++_func_exit_; ++ return res; ++} ++ ++ ++void rtw_generate_random_ibss(u8* pibss) ++{ ++ u32 curtime = rtw_get_current_time(); ++ ++_func_enter_; ++ pibss[0] = 0x02; //in ad-hoc mode bit1 must set to 1 ++ pibss[1] = 0x11; ++ pibss[2] = 0x87; ++ pibss[3] = (u8)(curtime & 0xff) ;//p[0]; ++ pibss[4] = (u8)((curtime>>8) & 0xff) ;//p[1]; ++ pibss[5] = (u8)((curtime>>16) & 0xff) ;//p[2]; ++_func_exit_; ++ return; ++} ++ ++u8 *rtw_get_capability_from_ie(u8 *ie) ++{ ++ return (ie + 8 + 2); ++} ++ ++ ++u16 rtw_get_capability(WLAN_BSSID_EX *bss) ++{ ++ u16 val; ++_func_enter_; ++ ++ _rtw_memcpy((u8 *)&val, rtw_get_capability_from_ie(bss->IEs), 2); ++ ++_func_exit_; ++ return le16_to_cpu(val); ++} ++ ++u8 *rtw_get_timestampe_from_ie(u8 *ie) ++{ ++ return (ie + 0); ++} ++ ++u8 *rtw_get_beacon_interval_from_ie(u8 *ie) ++{ ++ return (ie + 8); ++} ++ ++ ++int rtw_init_mlme_priv (_adapter *padapter)//(struct mlme_priv *pmlmepriv) ++{ ++ int res; ++_func_enter_; ++ res = _rtw_init_mlme_priv(padapter);// (pmlmepriv); ++_func_exit_; ++ return res; ++} ++ ++void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv) ++{ ++_func_enter_; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_mlme_priv\n")); ++ _rtw_free_mlme_priv (pmlmepriv); ++_func_exit_; ++} ++ ++int rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork); ++int rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork) ++{ ++ int res; ++_func_enter_; ++ res = _rtw_enqueue_network(queue, pnetwork); ++_func_exit_; ++ return res; ++} ++ ++ ++#ifndef PLATFORM_FREEBSD //Baron ++static struct wlan_network *rtw_dequeue_network(_queue *queue) ++{ ++ struct wlan_network *pnetwork; ++_func_enter_; ++ pnetwork = _rtw_dequeue_network(queue); ++_func_exit_; ++ return pnetwork; ++} ++#endif //PLATFORM_FREEBSD ++ ++struct wlan_network *rtw_alloc_network(struct mlme_priv *pmlmepriv ); ++struct wlan_network *rtw_alloc_network(struct mlme_priv *pmlmepriv )//(_queue *free_queue) ++{ ++ struct wlan_network *pnetwork; ++_func_enter_; ++ pnetwork = _rtw_alloc_network(pmlmepriv); ++_func_exit_; ++ return pnetwork; ++} ++ ++void rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork, u8 is_freeall); ++void rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork, u8 is_freeall)//(struct wlan_network *pnetwork, _queue *free_queue) ++{ ++_func_enter_; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_network==> ssid = %s \n\n" , pnetwork->network.Ssid.Ssid)); ++ _rtw_free_network(pmlmepriv, pnetwork, is_freeall); ++_func_exit_; ++} ++ ++void rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork ); ++void rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork ) ++{ ++_func_enter_; ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_network==> ssid = %s \n\n" , pnetwork->network.Ssid.Ssid)); ++ _rtw_free_network_nolock(pmlmepriv, pnetwork); ++_func_exit_; ++} ++ ++ ++void rtw_free_network_queue(_adapter* dev, u8 isfreeall) ++{ ++_func_enter_; ++ _rtw_free_network_queue(dev, isfreeall); ++_func_exit_; ++} ++ ++/* ++ return the wlan_network with the matching addr ++ ++ Shall be calle under atomic context... to avoid possible racing condition... ++*/ ++struct wlan_network *rtw_find_network(_queue *scanned_queue, u8 *addr) ++{ ++ struct wlan_network *pnetwork = _rtw_find_network(scanned_queue, addr); ++ ++ return pnetwork; ++} ++ ++int rtw_is_same_ibss(_adapter *adapter, struct wlan_network *pnetwork) ++{ ++ int ret=_TRUE; ++ struct security_priv *psecuritypriv = &adapter->securitypriv; ++ ++ if ( (psecuritypriv->dot11PrivacyAlgrthm != _NO_PRIVACY_ ) && ++ ( pnetwork->network.Privacy == 0 ) ) ++ { ++ ret=_FALSE; ++ } ++ else if((psecuritypriv->dot11PrivacyAlgrthm == _NO_PRIVACY_ ) && ++ ( pnetwork->network.Privacy == 1 ) ) ++ { ++ ret=_FALSE; ++ } ++ else ++ { ++ ret=_TRUE; ++ } ++ ++ return ret; ++ ++} ++ ++inline int is_same_ess(WLAN_BSSID_EX *a, WLAN_BSSID_EX *b); ++inline int is_same_ess(WLAN_BSSID_EX *a, WLAN_BSSID_EX *b) ++{ ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("(%s,%d)(%s,%d)\n", ++ // a->Ssid.Ssid,a->Ssid.SsidLength,b->Ssid.Ssid,b->Ssid.SsidLength)); ++ return (a->Ssid.SsidLength == b->Ssid.SsidLength) ++ && _rtw_memcmp(a->Ssid.Ssid, b->Ssid.Ssid, a->Ssid.SsidLength)==_TRUE; ++} ++ ++int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst) ++{ ++ u16 s_cap, d_cap; ++ ++_func_enter_; ++ ++#ifdef PLATFORM_OS_XP ++ if ( ((uint)dst) <= 0x7fffffff || ++ ((uint)src) <= 0x7fffffff || ++ ((uint)&s_cap) <= 0x7fffffff || ++ ((uint)&d_cap) <= 0x7fffffff) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n@@@@ error address of dst\n")); ++ ++ KeBugCheckEx(0x87110000, (ULONG_PTR)dst, (ULONG_PTR)src,(ULONG_PTR)&s_cap, (ULONG_PTR)&d_cap); ++ ++ return _FALSE; ++ } ++#endif ++ ++ ++ _rtw_memcpy((u8 *)&s_cap, rtw_get_capability_from_ie(src->IEs), 2); ++ _rtw_memcpy((u8 *)&d_cap, rtw_get_capability_from_ie(dst->IEs), 2); ++ ++ ++ s_cap = le16_to_cpu(s_cap); ++ d_cap = le16_to_cpu(d_cap); ++ ++_func_exit_; ++ ++ return ((src->Ssid.SsidLength == dst->Ssid.SsidLength) && ++ // (src->Configuration.DSConfig == dst->Configuration.DSConfig) && ++ ( (_rtw_memcmp(src->MacAddress, dst->MacAddress, ETH_ALEN)) == _TRUE) && ++ ( (_rtw_memcmp(src->Ssid.Ssid, dst->Ssid.Ssid, src->Ssid.SsidLength)) == _TRUE) && ++ ((s_cap & WLAN_CAPABILITY_IBSS) == ++ (d_cap & WLAN_CAPABILITY_IBSS)) && ++ ((s_cap & WLAN_CAPABILITY_BSS) == ++ (d_cap & WLAN_CAPABILITY_BSS))); ++ ++} ++ ++struct wlan_network * rtw_get_oldest_wlan_network(_queue *scanned_queue) ++{ ++ _list *plist, *phead; ++ ++ ++ struct wlan_network *pwlan = NULL; ++ struct wlan_network *oldest = NULL; ++_func_enter_; ++ phead = get_list_head(scanned_queue); ++ ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pwlan= LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ if(pwlan->fixed!=_TRUE) ++ { ++ if (oldest == NULL ||time_after(oldest->last_scanned, pwlan->last_scanned)) ++ oldest = pwlan; ++ } ++ ++ plist = get_next(plist); ++ } ++_func_exit_; ++ return oldest; ++ ++} ++ ++static void update_network(WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src, ++ _adapter * padapter, bool update_ie) ++{ ++ u8 ss_ori = dst->PhyInfo.SignalStrength; ++ u8 sq_ori = dst->PhyInfo.SignalQuality; ++ long rssi_ori = dst->Rssi; ++ ++ u8 ss_smp = src->PhyInfo.SignalStrength; ++ u8 sq_smp = src->PhyInfo.SignalQuality; ++ long rssi_smp = src->Rssi; ++ ++ u8 ss_final; ++ u8 sq_final; ++ long rssi_final; ++ ++_func_enter_; ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ rtw_hal_antdiv_rssi_compared(padapter, dst, src); //this will update src.Rssi, need consider again ++#endif ++ ++ #if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) && 1 ++ if(strcmp(dst->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) { ++ DBG_871X(FUNC_ADPT_FMT" %s("MAC_FMT", ch%u) ss_ori:%3u, sq_ori:%3u, rssi_ori:%3ld, ss_smp:%3u, sq_smp:%3u, rssi_smp:%3ld\n" ++ , FUNC_ADPT_ARG(padapter) ++ , src->Ssid.Ssid, MAC_ARG(src->MacAddress), src->Configuration.DSConfig ++ ,ss_ori, sq_ori, rssi_ori ++ ,ss_smp, sq_smp, rssi_smp ++ ); ++ } ++ #endif ++ ++ /* The rule below is 1/5 for sample value, 4/5 for history value */ ++ if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) && is_same_network(&(padapter->mlmepriv.cur_network.network), src)) { ++ /* Take the recvpriv's value for the connected AP*/ ++ ss_final = padapter->recvpriv.signal_strength; ++ sq_final = padapter->recvpriv.signal_qual; ++ /* the rssi value here is undecorated, and will be used for antenna diversity */ ++ if(sq_smp != 101) /* from the right channel */ ++ rssi_final = (src->Rssi+dst->Rssi*4)/5; ++ else ++ rssi_final = rssi_ori; ++ } ++ else { ++ if(sq_smp != 101) { /* from the right channel */ ++ ss_final = ((u32)(src->PhyInfo.SignalStrength)+(u32)(dst->PhyInfo.SignalStrength)*4)/5; ++ sq_final = ((u32)(src->PhyInfo.SignalQuality)+(u32)(dst->PhyInfo.SignalQuality)*4)/5; ++ rssi_final = (src->Rssi+dst->Rssi*4)/5; ++ } else { ++ /* bss info not receving from the right channel, use the original RX signal infos */ ++ ss_final = dst->PhyInfo.SignalStrength; ++ sq_final = dst->PhyInfo.SignalQuality; ++ rssi_final = dst->Rssi; ++ } ++ ++ } ++ ++ if (update_ie) ++ _rtw_memcpy((u8 *)dst, (u8 *)src, get_WLAN_BSSID_EX_sz(src)); ++ ++ dst->PhyInfo.SignalStrength = ss_final; ++ dst->PhyInfo.SignalQuality = sq_final; ++ dst->Rssi = rssi_final; ++ ++ #if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) && 1 ++ if(strcmp(dst->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) { ++ DBG_871X(FUNC_ADPT_FMT" %s("MAC_FMT"), SignalStrength:%u, SignalQuality:%u, RawRSSI:%ld\n" ++ , FUNC_ADPT_ARG(padapter) ++ , dst->Ssid.Ssid, MAC_ARG(dst->MacAddress), dst->PhyInfo.SignalStrength, dst->PhyInfo.SignalQuality, dst->Rssi); ++ } ++ #endif ++ ++#if 0 // old codes, may be useful one day... ++// DBG_871X("update_network: rssi=0x%lx dst->Rssi=%d ,dst->Rssi=0x%lx , src->Rssi=0x%lx",(dst->Rssi+src->Rssi)/2,dst->Rssi,dst->Rssi,src->Rssi); ++ if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) && is_same_network(&(padapter->mlmepriv.cur_network.network), src)) ++ { ++ ++ //DBG_871X("b:ssid=%s update_network: src->rssi=0x%d padapter->recvpriv.ui_rssi=%d\n",src->Ssid.Ssid,src->Rssi,padapter->recvpriv.signal); ++ if(padapter->recvpriv.signal_qual_data.total_num++ >= PHY_LINKQUALITY_SLID_WIN_MAX) ++ { ++ padapter->recvpriv.signal_qual_data.total_num = PHY_LINKQUALITY_SLID_WIN_MAX; ++ last_evm = padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index]; ++ padapter->recvpriv.signal_qual_data.total_val -= last_evm; ++ } ++ padapter->recvpriv.signal_qual_data.total_val += query_rx_pwr_percentage(src->Rssi); ++ ++ padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index++] = query_rx_pwr_percentage(src->Rssi); ++ if(padapter->recvpriv.signal_qual_data.index >= PHY_LINKQUALITY_SLID_WIN_MAX) ++ padapter->recvpriv.signal_qual_data.index = 0; ++ ++ //DBG_871X("Total SQ=%d pattrib->signal_qual= %d\n", padapter->recvpriv.signal_qual_data.total_val, src->Rssi); ++ ++ // <1> Showed on UI for user,in percentage. ++ tmpVal = padapter->recvpriv.signal_qual_data.total_val/padapter->recvpriv.signal_qual_data.total_num; ++ padapter->recvpriv.signal=(u8)tmpVal;//Link quality ++ ++ src->Rssi= translate_percentage_to_dbm(padapter->recvpriv.signal) ; ++ } ++ else{ ++// DBG_871X("ELSE:ssid=%s update_network: src->rssi=0x%d dst->rssi=%d\n",src->Ssid.Ssid,src->Rssi,dst->Rssi); ++ src->Rssi=(src->Rssi +dst->Rssi)/2;//dBM ++ } ++ ++// DBG_871X("a:update_network: src->rssi=0x%d padapter->recvpriv.ui_rssi=%d\n",src->Rssi,padapter->recvpriv.signal); ++ ++#endif ++ ++_func_exit_; ++} ++ ++static void update_current_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork) ++{ ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ ++_func_enter_; ++ ++#ifdef PLATFORM_OS_XP ++ if ((unsigned long)(&(pmlmepriv->cur_network.network)) < 0x7ffffff) ++ { ++ KeBugCheckEx(0x87111c1c, (ULONG_PTR)(&(pmlmepriv->cur_network.network)), 0, 0,0); ++ } ++#endif ++ ++ if ( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && (is_same_network(&(pmlmepriv->cur_network.network), pnetwork))) ++ { ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"Same Network\n"); ++ ++ //if(pmlmepriv->cur_network.network.IELength<= pnetwork->IELength) ++ { ++ update_network(&(pmlmepriv->cur_network.network), pnetwork,adapter, _TRUE); ++ rtw_update_protection(adapter, (pmlmepriv->cur_network.network.IEs) + sizeof (NDIS_802_11_FIXED_IEs), ++ pmlmepriv->cur_network.network.IELength); ++ } ++ } ++ ++_func_exit_; ++ ++} ++ ++ ++/* ++ ++Caller must hold pmlmepriv->lock first. ++ ++ ++*/ ++void rtw_update_scanned_network(_adapter *adapter, WLAN_BSSID_EX *target) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ ULONG bssid_ex_sz; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ struct wlan_network *oldest = NULL; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ if ((unsigned long)(pnetwork) < 0x7ffffff) ++ { ++#ifdef PLATFORM_OS_XP ++ KeBugCheckEx(0x87111c1c, (ULONG_PTR)pnetwork, 0, 0,0); ++#endif ++ } ++ ++ if (is_same_network(&(pnetwork->network), target)) ++ break; ++ ++ if ((oldest == ((struct wlan_network *)0)) || ++ time_after(oldest->last_scanned, pnetwork->last_scanned)) ++ oldest = pnetwork; ++ ++ plist = get_next(plist); ++ ++ } ++ ++ ++ /* If we didn't find a match, then get a new network slot to initialize ++ * with this beacon's information */ ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) { ++ ++ if (_rtw_queue_empty(&(pmlmepriv->free_bss_pool)) == _TRUE) { ++ /* If there are no more slots, expire the oldest */ ++ //list_del_init(&oldest->list); ++ pnetwork = oldest; ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ //target->PhyInfo.Optimum_antenna = pHalData->CurAntenna;//optimum_antenna=>For antenna diversity ++ rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(target->PhyInfo.Optimum_antenna)); ++#endif ++ _rtw_memcpy(&(pnetwork->network), target, get_WLAN_BSSID_EX_sz(target)); ++ //pnetwork->last_scanned = rtw_get_current_time(); ++ // variable initialize ++ pnetwork->fixed = _FALSE; ++ pnetwork->last_scanned = rtw_get_current_time(); ++ ++ pnetwork->network_type = 0; ++ pnetwork->aid=0; ++ pnetwork->join_res=0; ++ ++ /* bss info not receving from the right channel */ ++ if (pnetwork->network.PhyInfo.SignalQuality == 101) ++ pnetwork->network.PhyInfo.SignalQuality = 0; ++ } ++ else { ++ /* Otherwise just pull from the free list */ ++ ++ pnetwork = rtw_alloc_network(pmlmepriv); // will update scan_time ++ ++ if(pnetwork==NULL){ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n\n\nsomething wrong here\n\n\n")); ++ goto exit; ++ } ++ ++ bssid_ex_sz = get_WLAN_BSSID_EX_sz(target); ++ target->Length = bssid_ex_sz; ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ //target->PhyInfo.Optimum_antenna = pHalData->CurAntenna; ++ rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(target->PhyInfo.Optimum_antenna)); ++#endif ++ _rtw_memcpy(&(pnetwork->network), target, bssid_ex_sz ); ++ ++ pnetwork->last_scanned = rtw_get_current_time(); ++ ++ /* bss info not receving from the right channel */ ++ if (pnetwork->network.PhyInfo.SignalQuality == 101) ++ pnetwork->network.PhyInfo.SignalQuality = 0; ++ ++ rtw_list_insert_tail(&(pnetwork->list),&(queue->queue)); ++ ++ } ++ } ++ else { ++ /* we have an entry and we are going to update it. But this entry may ++ * be already expired. In this case we do the same as we found a new ++ * net and call the new_net handler ++ */ ++ bool update_ie = _TRUE; ++ ++ pnetwork->last_scanned = rtw_get_current_time(); ++ ++ //target.Reserved[0]==1, means that scaned network is a bcn frame. ++ if((pnetwork->network.IELength>target->IELength) && (target->Reserved[0]==1)) ++ update_ie = _FALSE; ++ ++ update_network(&(pnetwork->network), target,adapter, update_ie); ++ } ++ ++exit: ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++_func_exit_; ++} ++ ++void rtw_add_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork); ++void rtw_add_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &(((_adapter *)adapter)->mlmepriv); ++ //_queue *queue = &(pmlmepriv->scanned_queue); ++ ++_func_enter_; ++ ++ //_enter_critical_bh(&queue->lock, &irqL); ++ ++ #if defined(CONFIG_P2P) && defined(CONFIG_P2P_REMOVE_GROUP_INFO) ++ rtw_WLAN_BSSID_EX_remove_p2p_attr(pnetwork, P2P_ATTR_GROUP_INFO); ++ #endif ++ ++ update_current_network(adapter, pnetwork); ++ ++ rtw_update_scanned_network(adapter, pnetwork); ++ ++ //_exit_critical_bh(&queue->lock, &irqL); ++ ++_func_exit_; ++} ++ ++//select the desired network based on the capability of the (i)bss. ++// check items: (1) security ++// (2) network_type ++// (3) WMM ++// (4) HT ++// (5) others ++int rtw_is_desired_network(_adapter *adapter, struct wlan_network *pnetwork); ++int rtw_is_desired_network(_adapter *adapter, struct wlan_network *pnetwork) ++{ ++ struct security_priv *psecuritypriv = &adapter->securitypriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ u32 desired_encmode; ++ u32 privacy; ++ ++ //u8 wps_ie[512]; ++ uint wps_ielen; ++ ++ int bselected = _TRUE; ++ ++ desired_encmode = psecuritypriv->ndisencryptstatus; ++ privacy = pnetwork->network.Privacy; ++ ++ if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) ++ { ++ if(rtw_get_wps_ie(pnetwork->network.IEs+_FIXED_IE_LENGTH_, pnetwork->network.IELength-_FIXED_IE_LENGTH_, NULL, &wps_ielen)!=NULL) ++ { ++ return _TRUE; ++ } ++ else ++ { ++ return _FALSE; ++ } ++ } ++ if (adapter->registrypriv.wifi_spec == 1) //for correct flow of 8021X to do.... ++ { ++ u8 *p=NULL; ++ uint ie_len=0; ++ ++ if ((desired_encmode == Ndis802_11EncryptionDisabled) && (privacy != 0)) ++ bselected = _FALSE; ++ ++ if ( psecuritypriv->ndisauthtype == Ndis802_11AuthModeWPA2PSK) { ++ p = rtw_get_ie(pnetwork->network.IEs + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pnetwork->network.IELength - _BEACON_IE_OFFSET_)); ++ if (p && ie_len>0) { ++ bselected = _TRUE; ++ } else { ++ bselected = _FALSE; ++ } ++ } ++ } ++ ++ ++ if ((desired_encmode != Ndis802_11EncryptionDisabled) && (privacy == 0)) { ++ DBG_871X("desired_encmode: %d, privacy: %d\n", desired_encmode, privacy); ++ bselected = _FALSE; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ++ { ++ if(pnetwork->network.InfrastructureMode != pmlmepriv->cur_network.network.InfrastructureMode) ++ bselected = _FALSE; ++ } ++ ++ ++ return bselected; ++} ++ ++/* TODO: Perry : For Power Management */ ++void rtw_atimdone_event_callback(_adapter *adapter , u8 *pbuf) ++{ ++ ++_func_enter_; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("receive atimdone_evet\n")); ++_func_exit_; ++ return; ++} ++ ++ ++void rtw_survey_event_callback(_adapter *adapter, u8 *pbuf) ++{ ++ _irqL irqL; ++ u32 len; ++ WLAN_BSSID_EX *pnetwork; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ ++_func_enter_; ++ ++ pnetwork = (WLAN_BSSID_EX *)pbuf; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_survey_event_callback, ssid=%s\n", pnetwork->Ssid.Ssid)); ++ ++#ifdef CONFIG_RTL8712 ++ //endian_convert ++ pnetwork->Length = le32_to_cpu(pnetwork->Length); ++ pnetwork->Ssid.SsidLength = le32_to_cpu(pnetwork->Ssid.SsidLength); ++ pnetwork->Privacy =le32_to_cpu( pnetwork->Privacy); ++ pnetwork->Rssi = le32_to_cpu(pnetwork->Rssi); ++ pnetwork->NetworkTypeInUse =le32_to_cpu(pnetwork->NetworkTypeInUse); ++ pnetwork->Configuration.ATIMWindow = le32_to_cpu(pnetwork->Configuration.ATIMWindow); ++ pnetwork->Configuration.BeaconPeriod = le32_to_cpu(pnetwork->Configuration.BeaconPeriod); ++ pnetwork->Configuration.DSConfig =le32_to_cpu(pnetwork->Configuration.DSConfig); ++ pnetwork->Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->Configuration.FHConfig.DwellTime); ++ pnetwork->Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->Configuration.FHConfig.HopPattern); ++ pnetwork->Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->Configuration.FHConfig.HopSet); ++ pnetwork->Configuration.FHConfig.Length=le32_to_cpu(pnetwork->Configuration.FHConfig.Length); ++ pnetwork->Configuration.Length = le32_to_cpu(pnetwork->Configuration.Length); ++ pnetwork->InfrastructureMode = le32_to_cpu(pnetwork->InfrastructureMode); ++ pnetwork->IELength = le32_to_cpu(pnetwork->IELength); ++#endif ++ ++ len = get_WLAN_BSSID_EX_sz(pnetwork); ++ if(len > (sizeof(WLAN_BSSID_EX))) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n ****rtw_survey_event_callback: return a wrong bss ***\n")); ++ return; ++ } ++ ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ // update IBSS_network 's timestamp ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) == _TRUE) ++ { ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"rtw_survey_event_callback : WIFI_ADHOC_MASTER_STATE \n\n"); ++ if(_rtw_memcmp(&(pmlmepriv->cur_network.network.MacAddress), pnetwork->MacAddress, ETH_ALEN)) ++ { ++ struct wlan_network* ibss_wlan = NULL; ++ _irqL irqL; ++ ++ _rtw_memcpy(pmlmepriv->cur_network.network.IEs, pnetwork->IEs, 8); ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ibss_wlan = rtw_find_network(&pmlmepriv->scanned_queue, pnetwork->MacAddress); ++ if(ibss_wlan) ++ { ++ _rtw_memcpy(ibss_wlan->network.IEs , pnetwork->IEs, 8); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto exit; ++ } ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ } ++ } ++ ++ // lock pmlmepriv->lock when you accessing network_q ++ if ((check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) == _FALSE) ++ { ++ if( pnetwork->Ssid.Ssid[0] == 0 ) ++ { ++ pnetwork->Ssid.SsidLength = 0; ++ } ++ rtw_add_network(adapter, pnetwork); ++ } ++ ++exit: ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++_func_exit_; ++ ++ return; ++} ++ ++ ++ ++void rtw_surveydone_event_callback(_adapter *adapter, u8 *pbuf) ++{ ++ _irqL irqL; ++ u8 timer_cancelled = _FALSE; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ ++#ifdef CONFIG_MLME_EXT ++ ++ mlmeext_surveydone_event_callback(adapter); ++ ++#endif ++ ++_func_enter_; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ if(pmlmepriv->wps_probe_req_ie) ++ { ++ u32 free_len = pmlmepriv->wps_probe_req_ie_len; ++ pmlmepriv->wps_probe_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len); ++ pmlmepriv->wps_probe_req_ie = NULL; ++ } ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_surveydone_event_callback: fw_state:%x\n\n", get_fwstate(pmlmepriv))); ++ ++ if (check_fwstate(pmlmepriv,_FW_UNDER_SURVEY)) ++ { ++ //u8 timer_cancelled; ++ ++ timer_cancelled = _TRUE; ++ //_cancel_timer(&pmlmepriv->scan_to_timer, &timer_cancelled); ++ ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY); ++ } ++ else { ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("nic status =%x, survey done event comes too late!\n", get_fwstate(pmlmepriv))); ++ } ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if(timer_cancelled) ++ _cancel_timer(&pmlmepriv->scan_to_timer, &timer_cancelled); ++ ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ #ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ rtw_set_signal_stat_timer(&adapter->recvpriv); ++ #endif ++ ++ if(pmlmepriv->to_join == _TRUE) ++ { ++ if((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE) ) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED)==_FALSE) ++ { ++ set_fwstate(pmlmepriv, _FW_UNDER_LINKING); ++ ++ if(rtw_select_and_join_from_scanned_queue(pmlmepriv)==_SUCCESS) ++ { ++ _set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT ); ++ } ++ else ++ { ++ WLAN_BSSID_EX *pdev_network = &(adapter->registrypriv.dev_network); ++ u8 *pibss = adapter->registrypriv.dev_network.MacAddress; ++ ++ //pmlmepriv->fw_state ^= _FW_UNDER_SURVEY;//because don't set assoc_timer ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("switching to adhoc master\n")); ++ ++ _rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID)); ++ _rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID)); ++ ++ rtw_update_registrypriv_dev_network(adapter); ++ rtw_generate_random_ibss(pibss); ++ ++ pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE; ++ ++ if(rtw_createbss_cmd(adapter)!=_SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Error=>rtw_createbss_cmd status FAIL\n")); ++ } ++ ++ pmlmepriv->to_join = _FALSE; ++ } ++ } ++ } ++ else ++ { ++ int s_ret; ++ set_fwstate(pmlmepriv, _FW_UNDER_LINKING); ++ pmlmepriv->to_join = _FALSE; ++ if(_SUCCESS == (s_ret=rtw_select_and_join_from_scanned_queue(pmlmepriv))) ++ { ++ _set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT); ++ } ++ else if(s_ret == 2)//there is no need to wait for join ++ { ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ rtw_indicate_connect(adapter); ++ } ++ else ++ { ++ DBG_871X("try_to_join, but select scanning queue fail, to_roaming:%d\n", rtw_to_roaming(adapter)); ++ #ifdef CONFIG_LAYER2_ROAMING ++ if (rtw_to_roaming(adapter) != 0) { ++ if( --pmlmepriv->to_roaming == 0 ++ || _SUCCESS != rtw_sitesurvey_cmd(adapter, &pmlmepriv->assoc_ssid, 1, NULL, 0) ++ ) { ++ rtw_set_roaming(adapter, 0); ++#ifdef CONFIG_INTEL_WIDI ++ if(adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING) ++ { ++ _rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN); ++ intel_widi_wk_cmd(adapter, INTEL_WIDI_LISTEN_WK, NULL); ++ DBG_871X("change to widi listen\n"); ++ } ++#endif // CONFIG_INTEL_WIDI ++ rtw_free_assoc_resources(adapter, 1); ++ rtw_indicate_disconnect(adapter); ++ } else { ++ pmlmepriv->to_join = _TRUE; ++ } ++ } ++ #endif ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ } ++ } ++ } ++ ++ indicate_wx_scan_complete_event(adapter); ++ //DBG_871X("scan complete in %dms\n",rtw_get_passing_time_ms(pmlmepriv->scan_start_time)); ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++#ifdef CONFIG_P2P_PS ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ p2p_ps_wk_cmd(adapter, P2P_PS_SCAN_DONE, 0); ++ } ++#endif // CONFIG_P2P_PS ++ ++ rtw_os_xmit_schedule(adapter); ++#ifdef CONFIG_CONCURRENT_MODE ++ rtw_os_xmit_schedule(adapter->pbuddy_adapter); ++#endif ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_resume_xmit(adapter); ++#endif ++ ++#ifdef CONFIG_DRVEXT_MODULE_WSC ++ drvext_surveydone_callback(&adapter->drvextpriv); ++#endif ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++#ifdef CONFIG_INTEL_WIDI ++ if (adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_NONE) ++#endif ++ { ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ if(pmlmeext->sitesurvey_res.bss_cnt == 0){ ++ rtw_hal_sreset_reset(adapter); ++ } ++ } ++#endif ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_surveydone_event_callback(adapter); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++_func_exit_; ++ ++} ++ ++void rtw_dummy_event_callback(_adapter *adapter , u8 *pbuf) ++{ ++ ++} ++ ++void rtw_fwdbg_event_callback(_adapter *adapter , u8 *pbuf) ++{ ++ ++} ++ ++static void free_scanqueue(struct mlme_priv *pmlmepriv) ++{ ++ _irqL irqL, irqL0; ++ _queue *free_queue = &pmlmepriv->free_bss_pool; ++ _queue *scan_queue = &pmlmepriv->scanned_queue; ++ _list *plist, *phead, *ptemp; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+free_scanqueue\n")); ++ _enter_critical_bh(&scan_queue->lock, &irqL0); ++ _enter_critical_bh(&free_queue->lock, &irqL); ++ ++ phead = get_list_head(scan_queue); ++ plist = get_next(phead); ++ ++ while (plist != phead) ++ { ++ ptemp = get_next(plist); ++ rtw_list_delete(plist); ++ rtw_list_insert_tail(plist, &free_queue->queue); ++ plist =ptemp; ++ pmlmepriv->num_of_scanned --; ++ } ++ ++ _exit_critical_bh(&free_queue->lock, &irqL); ++ _exit_critical_bh(&scan_queue->lock, &irqL0); ++ ++_func_exit_; ++} ++ ++/* ++*rtw_free_assoc_resources: the caller has to lock pmlmepriv->lock ++*/ ++void rtw_free_assoc_resources(_adapter *adapter, int lock_scanned_queue) ++{ ++ _irqL irqL; ++ struct wlan_network* pwlan = NULL; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct wlan_network *tgt_network = &pmlmepriv->cur_network; ++ ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++#endif //CONFIG_TDLS ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+rtw_free_assoc_resources\n")); ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("tgt_network->network.MacAddress="MAC_FMT" ssid=%s\n", ++ MAC_ARG(tgt_network->network.MacAddress), tgt_network->network.Ssid.Ssid)); ++ ++ if(check_fwstate( pmlmepriv, WIFI_STATION_STATE|WIFI_AP_STATE)) ++ { ++ struct sta_info* psta; ++ ++ psta = rtw_get_stainfo(&adapter->stapriv, tgt_network->network.MacAddress); ++ ++#ifdef CONFIG_TDLS ++ if(ptdlsinfo->setup_state != TDLS_STATE_NONE) ++ { ++ rtw_tdls_cmd(adapter, myid(&(adapter->eeprompriv)), TDLS_RS_RCR); ++ rtw_reset_tdls_info(adapter); ++ rtw_free_all_stainfo(adapter); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ } ++ else ++#endif //CONFIG_TDLS ++ { ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(adapter, psta); ++ } ++ ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ } ++ ++ if(check_fwstate( pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE)) ++ { ++ struct sta_info* psta; ++ ++ rtw_free_all_stainfo(adapter); ++ ++ psta = rtw_get_bcmc_stainfo(adapter); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(adapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ rtw_init_bcmc_stainfo(adapter); ++ } ++ ++ if(lock_scanned_queue) ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress); ++ if(pwlan) ++ { ++ pwlan->fixed = _FALSE; ++#ifdef CONFIG_P2P ++ if(!rtw_p2p_chk_state(&adapter->wdinfo, P2P_STATE_NONE)) ++ { ++ u32 p2p_ielen=0; ++ u8 *p2p_ie; ++ //u16 capability; ++ u8 *pcap = NULL; ++ u32 capability_len=0; ++ ++ //DBG_871X("free disconnecting network\n"); ++ //rtw_free_network_nolock(pmlmepriv, pwlan); ++ ++ if((p2p_ie=rtw_get_p2p_ie(pwlan->network.IEs+_FIXED_IE_LENGTH_, pwlan->network.IELength-_FIXED_IE_LENGTH_, NULL, &p2p_ielen))) ++ { ++ pcap = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, NULL, &capability_len); ++ if(pcap && capability_len==2) ++ { ++ u16 cap = *(u16*)pcap ; ++ *(u16*)pcap = cap&0x00ff;//clear group capability when free this network ++ } ++ } ++ ++ rtw_set_scan_deny(adapter, 2000); ++ //rtw_clear_scan_deny(adapter); ++ } ++#endif //CONFIG_P2P ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_assoc_resources : pwlan== NULL \n\n")); ++ } ++ ++ ++ if((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) && (adapter->stapriv.asoc_sta_count== 1)) ++ /*||check_fwstate(pmlmepriv, WIFI_STATION_STATE)*/) ++ { ++ rtw_free_network_nolock(pmlmepriv, pwlan); ++ } ++ ++ if(lock_scanned_queue) ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ adapter->securitypriv.key_mask = 0; ++ ++_func_exit_; ++ ++} ++ ++/* ++*rtw_indicate_connect: the caller has to lock pmlmepriv->lock ++*/ ++void rtw_indicate_connect(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("+rtw_indicate_connect\n")); ++ ++ pmlmepriv->to_join = _FALSE; ++ ++ if(!check_fwstate(&padapter->mlmepriv, _FW_LINKED)) ++ { ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ rtw_hal_set_hwreg(padapter, HW_VAR_ANTENNA_DIVERSITY_LINK, 0); ++#endif ++ set_fwstate(pmlmepriv, _FW_LINKED); ++ ++ rtw_led_control(padapter, LED_CTL_LINK); ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ if(padapter->drvextpriv.enable_wpa) ++ { ++ indicate_l2_connect(padapter); ++ } ++ else ++#endif ++ { ++ rtw_os_indicate_connect(padapter); ++ } ++ ++ } ++ ++ rtw_set_roaming(padapter, 0); ++ ++#ifdef CONFIG_INTEL_WIDI ++ if(padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING) ++ { ++ _rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN); ++ intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_WK, NULL); ++ DBG_871X("change to widi listen\n"); ++ } ++#endif // CONFIG_INTEL_WIDI ++ ++ rtw_set_scan_deny(padapter, 3000); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("-rtw_indicate_connect: fw_state=0x%08x\n", get_fwstate(pmlmepriv))); ++ ++_func_exit_; ++ ++} ++ ++ ++/* ++*rtw_indicate_disconnect: the caller has to lock pmlmepriv->lock ++*/ ++void rtw_indicate_disconnect( _adapter *padapter ) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("+rtw_indicate_disconnect\n")); ++ ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING|WIFI_UNDER_WPS); ++ ++ if(rtw_to_roaming(padapter) > 0) ++ _clr_fwstate_(pmlmepriv, _FW_LINKED); ++ ++ if(check_fwstate(&padapter->mlmepriv, _FW_LINKED) ++ || (rtw_to_roaming(padapter) <= 0) ++ ) ++ { ++ rtw_os_indicate_disconnect(padapter); ++ ++ //set ips_deny_time to avoid enter IPS before LPS leave ++ padapter->pwrctrlpriv.ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(3000); ++ ++ _clr_fwstate_(pmlmepriv, _FW_LINKED); ++ ++ rtw_led_control(padapter, LED_CTL_NO_LINK); ++ ++ rtw_clear_scan_deny(padapter); ++ ++ } ++ ++#ifdef CONFIG_P2P_PS ++ p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1); ++#endif // CONFIG_P2P_PS ++ ++#ifdef CONFIG_LPS ++#ifdef CONFIG_WOWLAN ++ if(padapter->pwrctrlpriv.wowlan_mode==_FALSE) ++#endif //CONFIG_WOWLAN ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_DISCONNECT, 1); ++ ++#endif ++ ++_func_exit_; ++} ++ ++inline void rtw_indicate_scan_done( _adapter *padapter, bool aborted) ++{ ++ rtw_os_indicate_scan_done(padapter, aborted); ++} ++ ++void rtw_scan_abort(_adapter *adapter) ++{ ++ u32 cnt=0; ++ u32 start; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(adapter->mlmeextpriv); ++ ++ start = rtw_get_current_time(); ++ pmlmeext->scan_abort = _TRUE; ++ while (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) ++ && rtw_get_passing_time_ms(start) <= 200) { ++ ++ if (adapter->bDriverStopped || adapter->bSurpriseRemoved) ++ break; ++ ++ DBG_871X(FUNC_NDEV_FMT"fw_state=_FW_UNDER_SURVEY!\n", FUNC_NDEV_ARG(adapter->pnetdev)); ++ rtw_msleep_os(20); ++ } ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) { ++ if (!adapter->bDriverStopped && !adapter->bSurpriseRemoved) ++ DBG_871X(FUNC_NDEV_FMT"waiting for scan_abort time out!\n", FUNC_NDEV_ARG(adapter->pnetdev)); ++ #ifdef CONFIG_PLATFORM_MSTAR ++ //_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY); ++ set_survey_timer(pmlmeext, 0); ++ _set_timer(&pmlmepriv->scan_to_timer, 50); ++ #endif ++ rtw_indicate_scan_done(adapter, _TRUE); ++ } ++ pmlmeext->scan_abort = _FALSE; ++} ++ ++static struct sta_info *rtw_joinbss_update_stainfo(_adapter *padapter, struct wlan_network *pnetwork) ++{ ++ int i; ++ struct sta_info *bmc_sta, *psta=NULL; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ psta = rtw_get_stainfo(pstapriv, pnetwork->network.MacAddress); ++ if(psta==NULL) { ++ psta = rtw_alloc_stainfo(pstapriv, pnetwork->network.MacAddress); ++ } ++ ++ if(psta) //update ptarget_sta ++ { ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ psta->aid = pnetwork->join_res; ++#ifdef CONFIG_CONCURRENT_MODE ++ ++ if(PRIMARY_ADAPTER == padapter->adapter_type) ++ psta->mac_id=0; ++ else ++ psta->mac_id=2; ++#else ++ psta->mac_id=0; ++#endif ++ ++ psta->raid = networktype_to_raid(pmlmeext->cur_wireless_mode); ++ ++ //security related ++ if(padapter->securitypriv.dot11AuthAlgrthm== dot11AuthAlgrthm_8021X) ++ { ++ padapter->securitypriv.binstallGrpkey=_FALSE; ++ padapter->securitypriv.busetkipkey=_FALSE; ++ padapter->securitypriv.bgrpkey_handshake=_FALSE; ++ ++ psta->ieee8021x_blocked=_TRUE; ++ psta->dot118021XPrivacy=padapter->securitypriv.dot11PrivacyAlgrthm; ++ ++ _rtw_memset((u8 *)&psta->dot118021x_UncstKey, 0, sizeof (union Keytype)); ++ ++ _rtw_memset((u8 *)&psta->dot11tkiprxmickey, 0, sizeof (union Keytype)); ++ _rtw_memset((u8 *)&psta->dot11tkiptxmickey, 0, sizeof (union Keytype)); ++ ++ _rtw_memset((u8 *)&psta->dot11txpn, 0, sizeof (union pn48)); ++#ifdef CONFIG_IEEE80211W ++ _rtw_memset((u8 *)&psta->dot11wtxpn, 0, sizeof (union pn48)); ++#endif //CONFIG_IEEE80211W ++ _rtw_memset((u8 *)&psta->dot11rxpn, 0, sizeof (union pn48)); ++ } ++ ++ // Commented by Albert 2012/07/21 ++ // When doing the WPS, the wps_ie_len won't equal to 0 ++ // And the Wi-Fi driver shouldn't allow the data packet to be tramsmitted. ++ if ( padapter->securitypriv.wps_ie_len != 0 ) ++ { ++ psta->ieee8021x_blocked=_TRUE; ++ padapter->securitypriv.wps_ie_len = 0; ++ } ++ ++ ++ //for A-MPDU Rx reordering buffer control for bmc_sta & sta_info ++ //if A-MPDU Rx is enabled, reseting rx_ordering_ctrl wstart_b(indicate_seq) to default value=0xffff ++ //todo: check if AP can send A-MPDU packets ++ for(i=0; i < 16 ; i++) ++ { ++ //preorder_ctrl = &precvpriv->recvreorder_ctrl[i]; ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ preorder_ctrl->enable = _FALSE; ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ preorder_ctrl->wend_b= 0xffff; ++ preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32 ++ } ++ ++ ++ bmc_sta = rtw_get_bcmc_stainfo(padapter); ++ if(bmc_sta) ++ { ++ for(i=0; i < 16 ; i++) ++ { ++ //preorder_ctrl = &precvpriv->recvreorder_ctrl[i]; ++ preorder_ctrl = &bmc_sta->recvreorder_ctrl[i]; ++ preorder_ctrl->enable = _FALSE; ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ preorder_ctrl->wend_b= 0xffff; ++ preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32 ++ } ++ } ++ ++ ++ //misc. ++ update_sta_info(padapter, psta); ++ ++ } ++ ++ return psta; ++ ++} ++ ++//pnetwork : returns from rtw_joinbss_event_callback ++//ptarget_wlan: found from scanned_queue ++static void rtw_joinbss_update_network(_adapter *padapter, struct wlan_network *ptarget_wlan, struct wlan_network *pnetwork) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\nfw_state:%x, BSSID:"MAC_FMT"\n" ++ ,get_fwstate(pmlmepriv), MAC_ARG(pnetwork->network.MacAddress))); ++ ++ ++ // why not use ptarget_wlan?? ++ _rtw_memcpy(&cur_network->network, &pnetwork->network, pnetwork->network.Length); ++ ++ cur_network->aid = pnetwork->join_res; ++ ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ rtw_set_signal_stat_timer(&padapter->recvpriv); ++#endif ++ padapter->recvpriv.signal_strength = ptarget_wlan->network.PhyInfo.SignalStrength; ++ padapter->recvpriv.signal_qual = ptarget_wlan->network.PhyInfo.SignalQuality; ++ //the ptarget_wlan->network.Rssi is raw data, we use ptarget_wlan->network.PhyInfo.SignalStrength instead (has scaled) ++ padapter->recvpriv.rssi = translate_percentage_to_dbm(ptarget_wlan->network.PhyInfo.SignalStrength); ++ #if defined(DBG_RX_SIGNAL_DISPLAY_PROCESSING) && 1 ++ DBG_871X(FUNC_ADPT_FMT" signal_strength:%3u, rssi:%3d, signal_qual:%3u" ++ "\n" ++ , FUNC_ADPT_ARG(padapter) ++ , padapter->recvpriv.signal_strength ++ , padapter->recvpriv.rssi ++ , padapter->recvpriv.signal_qual ++ ); ++ #endif ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ rtw_set_signal_stat_timer(&padapter->recvpriv); ++#endif ++ ++ //update fw_state //will clr _FW_UNDER_LINKING here indirectly ++ switch(pnetwork->network.InfrastructureMode) ++ { ++ case Ndis802_11Infrastructure: ++ ++ if(pmlmepriv->fw_state&WIFI_UNDER_WPS) ++ pmlmepriv->fw_state = WIFI_STATION_STATE|WIFI_UNDER_WPS; ++ else ++ pmlmepriv->fw_state = WIFI_STATION_STATE; ++ ++ break; ++ case Ndis802_11IBSS: ++ pmlmepriv->fw_state = WIFI_ADHOC_STATE; ++ break; ++ default: ++ pmlmepriv->fw_state = WIFI_NULL_STATE; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Invalid network_mode\n")); ++ break; ++ } ++ ++ rtw_update_protection(padapter, (cur_network->network.IEs) + sizeof (NDIS_802_11_FIXED_IEs), ++ (cur_network->network.IELength)); ++ ++#ifdef CONFIG_80211N_HT ++ rtw_update_ht_cap(padapter, cur_network->network.IEs, cur_network->network.IELength, (u8) cur_network->network.Configuration.DSConfig); ++#endif ++ ++ ++} ++ ++//Notes: the fucntion could be > passive_level (the same context as Rx tasklet) ++//pnetwork : returns from rtw_joinbss_event_callback ++//ptarget_wlan: found from scanned_queue ++//if join_res > 0, for (fw_state==WIFI_STATION_STATE), we check if "ptarget_sta" & "ptarget_wlan" exist. ++//if join_res > 0, for (fw_state==WIFI_ADHOC_STATE), we only check if "ptarget_wlan" exist. ++//if join_res > 0, update "cur_network->network" from "pnetwork->network" if (ptarget_wlan !=NULL). ++// ++//#define REJOIN ++void rtw_joinbss_event_prehandle(_adapter *adapter, u8 *pbuf) ++{ ++ _irqL irqL,irqL2; ++ static u8 retry=0; ++ u8 timer_cancelled; ++ struct sta_info *ptarget_sta= NULL, *pcur_sta = NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ struct wlan_network *pnetwork = (struct wlan_network *)pbuf; ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ struct wlan_network *pcur_wlan = NULL, *ptarget_wlan = NULL; ++ unsigned int the_same_macaddr = _FALSE; ++ ++_func_enter_; ++ ++#ifdef CONFIG_RTL8712 ++ //endian_convert ++ pnetwork->join_res = le32_to_cpu(pnetwork->join_res); ++ pnetwork->network_type = le32_to_cpu(pnetwork->network_type); ++ pnetwork->network.Length = le32_to_cpu(pnetwork->network.Length); ++ pnetwork->network.Ssid.SsidLength = le32_to_cpu(pnetwork->network.Ssid.SsidLength); ++ pnetwork->network.Privacy =le32_to_cpu( pnetwork->network.Privacy); ++ pnetwork->network.Rssi = le32_to_cpu(pnetwork->network.Rssi); ++ pnetwork->network.NetworkTypeInUse =le32_to_cpu(pnetwork->network.NetworkTypeInUse) ; ++ pnetwork->network.Configuration.ATIMWindow = le32_to_cpu(pnetwork->network.Configuration.ATIMWindow); ++ pnetwork->network.Configuration.BeaconPeriod = le32_to_cpu(pnetwork->network.Configuration.BeaconPeriod); ++ pnetwork->network.Configuration.DSConfig = le32_to_cpu(pnetwork->network.Configuration.DSConfig); ++ pnetwork->network.Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->network.Configuration.FHConfig.DwellTime); ++ pnetwork->network.Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->network.Configuration.FHConfig.HopPattern); ++ pnetwork->network.Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->network.Configuration.FHConfig.HopSet); ++ pnetwork->network.Configuration.FHConfig.Length=le32_to_cpu(pnetwork->network.Configuration.FHConfig.Length); ++ pnetwork->network.Configuration.Length = le32_to_cpu(pnetwork->network.Configuration.Length); ++ pnetwork->network.InfrastructureMode = le32_to_cpu(pnetwork->network.InfrastructureMode); ++ pnetwork->network.IELength = le32_to_cpu(pnetwork->network.IELength ); ++#endif ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("joinbss event call back received with res=%d\n", pnetwork->join_res)); ++ ++ rtw_get_encrypt_decrypt_from_registrypriv(adapter); ++ ++ ++ if (pmlmepriv->assoc_ssid.SsidLength == 0) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("@@@@@ joinbss event call back for Any SSid\n")); ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("@@@@@ rtw_joinbss_event_callback for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid)); ++ } ++ ++ the_same_macaddr = _rtw_memcmp(pnetwork->network.MacAddress, cur_network->network.MacAddress, ETH_ALEN); ++ ++ pnetwork->network.Length = get_WLAN_BSSID_EX_sz(&pnetwork->network); ++ if(pnetwork->network.Length > sizeof(WLAN_BSSID_EX)) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n\n ***joinbss_evt_callback return a wrong bss ***\n\n")); ++ goto ignore_joinbss_callback; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n rtw_joinbss_event_callback !! _enter_critical \n")); ++ ++ if(pnetwork->join_res > 0) ++ { ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ retry = 0; ++ if (check_fwstate(pmlmepriv,_FW_UNDER_LINKING) ) ++ { ++ //s1. find ptarget_wlan ++ if(check_fwstate(pmlmepriv, _FW_LINKED) ) ++ { ++ if(the_same_macaddr == _TRUE) ++ { ++ ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress); ++ } ++ else ++ { ++ pcur_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress); ++ if(pcur_wlan) pcur_wlan->fixed = _FALSE; ++ ++ pcur_sta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress); ++ if(pcur_sta){ ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ rtw_free_stainfo(adapter, pcur_sta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ } ++ ++ ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, pnetwork->network.MacAddress); ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE){ ++ if(ptarget_wlan) ptarget_wlan->fixed = _TRUE; ++ } ++ } ++ ++ } ++ else ++ { ++ ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, pnetwork->network.MacAddress); ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE){ ++ if(ptarget_wlan) ptarget_wlan->fixed = _TRUE; ++ } ++ } ++ ++ //s2. update cur_network ++ if(ptarget_wlan) ++ { ++ rtw_joinbss_update_network(adapter, ptarget_wlan, pnetwork); ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't find ptarget_wlan when joinbss_event callback\n")); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ignore_joinbss_callback; ++ } ++ ++ ++ //s3. find ptarget_sta & update ptarget_sta after update cur_network only for station mode ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ ptarget_sta = rtw_joinbss_update_stainfo(adapter, pnetwork); ++ if(ptarget_sta==NULL) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't update stainfo when joinbss_event callback\n")); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ignore_joinbss_callback; ++ } ++ } ++ ++ //s4. indicate connect ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ rtw_indicate_connect(adapter); ++ } ++ else ++ { ++ //adhoc mode will rtw_indicate_connect when rtw_stassoc_event_callback ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("adhoc mode, fw_state:%x", get_fwstate(pmlmepriv))); ++ } ++ ++ ++ //s5. Cancle assoc_timer ++ _cancel_timer(&pmlmepriv->assoc_timer, &timer_cancelled); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("Cancle assoc_timer\n")); ++ ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_joinbss_event_callback err: fw_state:%x", get_fwstate(pmlmepriv))); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ignore_joinbss_callback; ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ } ++ else if(pnetwork->join_res == -4) ++ { ++ rtw_reset_securitypriv(adapter); ++ _set_timer(&pmlmepriv->assoc_timer, 1); ++ ++ //rtw_free_assoc_resources(adapter, 1); ++ ++ if((check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("fail! clear _FW_UNDER_LINKING ^^^fw_state=%x\n", get_fwstate(pmlmepriv))); ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ } ++ ++ } ++ else //if join_res < 0 (join fails), then try again ++ { ++ ++ #ifdef REJOIN ++ res = _FAIL; ++ if(retry < 2) { ++ res = rtw_select_and_join_from_scanned_queue(pmlmepriv); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_select_and_join_from_scanned_queue again! res:%d\n",res)); ++ } ++ ++ if(res == _SUCCESS) ++ { ++ //extend time of assoc_timer ++ _set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT); ++ retry++; ++ } ++ else if(res == 2)//there is no need to wait for join ++ { ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ rtw_indicate_connect(adapter); ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Set Assoc_Timer = 1; can't find match ssid in scanned_q \n")); ++ #endif ++ ++ _set_timer(&pmlmepriv->assoc_timer, 1); ++ //rtw_free_assoc_resources(adapter, 1); ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++ #ifdef REJOIN ++ retry = 0; ++ } ++ #endif ++ } ++ ++ignore_joinbss_callback: ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ _func_exit_; ++} ++ ++void rtw_joinbss_event_callback(_adapter *adapter, u8 *pbuf) ++{ ++ struct wlan_network *pnetwork = (struct wlan_network *)pbuf; ++ ++_func_enter_; ++ ++ mlmeext_joinbss_event_callback(adapter, pnetwork->join_res); ++ ++ rtw_os_xmit_schedule(adapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ rtw_os_xmit_schedule(adapter->pbuddy_adapter); ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_resume_xmit(adapter); ++#endif ++ ++_func_exit_; ++} ++ ++void rtw_stassoc_event_callback(_adapter *adapter, u8 *pbuf) ++{ ++ _irqL irqL; ++ struct sta_info *psta; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ struct stassoc_event *pstassoc = (struct stassoc_event*)pbuf; ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ struct wlan_network *ptarget_wlan = NULL; ++ ++_func_enter_; ++ ++ if(rtw_access_ctrl(adapter, pstassoc->macaddr) == _FALSE) ++ return; ++ ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) ++ { ++ psta = rtw_get_stainfo(&adapter->stapriv, pstassoc->macaddr); ++ if(psta) ++ { ++#ifdef CONFIG_IOCTL_CFG80211 ++#ifdef COMPAT_KERNEL_RELEASE ++ ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ u8 *passoc_req = NULL; ++ u32 assoc_req_len; ++ ++ _enter_critical_bh(&psta->lock, &irqL); ++ if(psta->passoc_req && psta->assoc_req_len>0) ++ { ++ passoc_req = rtw_zmalloc(psta->assoc_req_len); ++ if(passoc_req) ++ { ++ assoc_req_len = psta->assoc_req_len; ++ _rtw_memcpy(passoc_req, psta->passoc_req, assoc_req_len); ++ ++ rtw_mfree(psta->passoc_req , psta->assoc_req_len); ++ psta->passoc_req = NULL; ++ psta->assoc_req_len = 0; ++ } ++ } ++ _exit_critical_bh(&psta->lock, &irqL); ++ ++ if(passoc_req && assoc_req_len>0) ++ { ++ rtw_cfg80211_indicate_sta_assoc(adapter, passoc_req, assoc_req_len); ++ ++ rtw_mfree(passoc_req, assoc_req_len); ++ } ++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ //bss_cap_update_on_sta_join(adapter, psta); ++ //sta_info_update(adapter, psta); ++ ap_sta_info_defer_update(adapter, psta); ++ } ++ ++ goto exit; ++ } ++#endif ++ ++ psta = rtw_get_stainfo(&adapter->stapriv, pstassoc->macaddr); ++ if( psta != NULL) ++ { ++ //the sta have been in sta_info_queue => do nothing ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Error: rtw_stassoc_event_callback: sta has been in sta_hash_queue \n")); ++ ++ goto exit; //(between drv has received this event before and fw have not yet to set key to CAM_ENTRY) ++ } ++ ++ psta = rtw_alloc_stainfo(&adapter->stapriv, pstassoc->macaddr); ++ if (psta == NULL) { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't alloc sta_info when rtw_stassoc_event_callback\n")); ++ goto exit; ++ } ++ ++ //to do : init sta_info variable ++ psta->qos_option = 0; ++ psta->mac_id = (uint)pstassoc->cam_id; ++ //psta->aid = (uint)pstassoc->cam_id; ++ ++ if(adapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X) ++ psta->dot118021XPrivacy = adapter->securitypriv.dot11PrivacyAlgrthm; ++ ++ psta->ieee8021x_blocked = _FALSE; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if ( (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)==_TRUE ) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE ) ) ++ { ++ if(adapter->stapriv.asoc_sta_count== 2) ++ { ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress); ++ if(ptarget_wlan) ptarget_wlan->fixed = _TRUE; ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ // a sta + bc/mc_stainfo (not Ibss_stainfo) ++ rtw_indicate_connect(adapter); ++ } ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ ++ mlmeext_sta_add_event_callback(adapter, psta); ++ ++#ifdef CONFIG_RTL8711 ++ //submit SetStaKey_cmd to tell fw, fw will allocate an CAM entry for this sta ++ rtw_setstakey_cmd(adapter, (unsigned char*)psta, _FALSE); ++#endif ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++void rtw_stadel_event_callback(_adapter *adapter, u8 *pbuf) ++{ ++ _irqL irqL,irqL2; ++ struct sta_info *psta; ++ struct wlan_network* pwlan = NULL; ++ WLAN_BSSID_EX *pdev_network=NULL; ++ u8* pibss = NULL; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ struct stadel_event *pstadel = (struct stadel_event*)pbuf; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct wlan_network *tgt_network = &(pmlmepriv->cur_network); ++ ++_func_enter_; ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) ++ { ++#ifdef CONFIG_IOCTL_CFG80211 ++#ifdef COMPAT_KERNEL_RELEASE ++ ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ rtw_cfg80211_indicate_sta_disassoc(adapter, pstadel->macaddr, *(u16*)pstadel->rsvd); ++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ return; ++ } ++ ++ ++ mlmeext_sta_del_event_callback(adapter); ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL2); ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) ) ++ { ++ #ifdef CONFIG_LAYER2_ROAMING ++ if (rtw_to_roaming(adapter) > 0) ++ pmlmepriv->to_roaming--; /* this stadel_event is caused by roaming, decrease to_roaming */ ++ else if (rtw_to_roaming(adapter) == 0) ++ rtw_set_roaming(adapter, adapter->registrypriv.max_roaming_times); ++#ifdef CONFIG_INTEL_WIDI ++ if(adapter->mlmepriv.widi_state != INTEL_WIDI_STATE_CONNECTED) ++#endif // CONFIG_INTEL_WIDI ++ if(*((unsigned short *)(pstadel->rsvd)) != WLAN_REASON_EXPIRATION_CHK) ++ rtw_set_roaming(adapter, 0); /* don't roam */ ++ #endif ++ ++ rtw_free_uc_swdec_pending_queue(adapter); ++ ++ rtw_free_assoc_resources(adapter, 1); ++ rtw_indicate_disconnect(adapter); ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ // remove the network entry in scanned_queue ++ pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress); ++ if (pwlan) { ++ pwlan->fixed = _FALSE; ++ rtw_free_network_nolock(pmlmepriv, pwlan); ++ } ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ _rtw_roaming(adapter, tgt_network); ++ ++#ifdef CONFIG_INTEL_WIDI ++ if (!rtw_to_roaming(adapter)) ++ process_intel_widi_disconnect(adapter, 1); ++#endif // CONFIG_INTEL_WIDI ++ } ++ ++ if ( check_fwstate(pmlmepriv,WIFI_ADHOC_MASTER_STATE) || ++ check_fwstate(pmlmepriv,WIFI_ADHOC_STATE)) ++ { ++ psta = rtw_get_stainfo(&adapter->stapriv, pstadel->macaddr); ++ ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(adapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ if(adapter->stapriv.asoc_sta_count== 1) //a sta + bc/mc_stainfo (not Ibss_stainfo) ++ { ++ //rtw_indicate_disconnect(adapter);//removed@20091105 ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ //free old ibss network ++ //pwlan = rtw_find_network(&pmlmepriv->scanned_queue, pstadel->macaddr); ++ pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress); ++ if(pwlan) ++ { ++ pwlan->fixed = _FALSE; ++ rtw_free_network_nolock(pmlmepriv, pwlan); ++ } ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ //re-create ibss ++ pdev_network = &(adapter->registrypriv.dev_network); ++ pibss = adapter->registrypriv.dev_network.MacAddress; ++ ++ _rtw_memcpy(pdev_network, &tgt_network->network, get_WLAN_BSSID_EX_sz(&tgt_network->network)); ++ ++ _rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID)); ++ _rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID)); ++ ++ rtw_update_registrypriv_dev_network(adapter); ++ ++ rtw_generate_random_ibss(pibss); ++ ++ if(check_fwstate(pmlmepriv,WIFI_ADHOC_STATE)) ++ { ++ set_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE); ++ _clr_fwstate_(pmlmepriv, WIFI_ADHOC_STATE); ++ } ++ ++ if(rtw_createbss_cmd(adapter)!=_SUCCESS) ++ { ++ ++ RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("***Error=>stadel_event_callback: rtw_createbss_cmd status FAIL*** \n ")); ++ ++ } ++ ++ ++ } ++ ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL2); ++ ++_func_exit_; ++ ++} ++ ++ ++void rtw_cpwm_event_callback(PADAPTER padapter, u8 *pbuf) ++{ ++#ifdef CONFIG_LPS_LCLK ++ struct reportpwrstate_parm *preportpwrstate; ++#endif ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_cpwm_event_callback !!!\n")); ++#ifdef CONFIG_LPS_LCLK ++ preportpwrstate = (struct reportpwrstate_parm*)pbuf; ++ preportpwrstate->state |= (u8)(padapter->pwrctrlpriv.cpwm_tog + 0x80); ++ cpwm_int_hdl(padapter, preportpwrstate); ++#endif ++ ++_func_exit_; ++ ++} ++ ++/* ++* _rtw_join_timeout_handler - Timeout/faliure handler for CMD JoinBss ++* @adapter: pointer to _adapter structure ++*/ ++void _rtw_join_timeout_handler (_adapter *adapter) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++#ifdef CONFIG_LAYER2_ROAMING ++ int do_join_r; ++#endif //CONFIG_LAYER2_ROAMING ++ ++#if 0 ++ if (adapter->bDriverStopped == _TRUE){ ++ _rtw_up_sema(&pmlmepriv->assoc_terminate); ++ return; ++ } ++#endif ++ ++_func_enter_; ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_lock(NULL); ++ if (callout_pending(&adapter->mlmepriv.assoc_timer.callout)) { ++ /* callout was reset */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ if (!callout_active(&adapter->mlmepriv.assoc_timer.callout)) { ++ /* callout was stopped */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ callout_deactivate(&adapter->mlmepriv.assoc_timer.callout); ++ ++ ++#endif ++ ++ DBG_871X("%s, fw_state=%x\n", __FUNCTION__, get_fwstate(pmlmepriv)); ++ ++ if(adapter->bDriverStopped ||adapter->bSurpriseRemoved) ++ return; ++ ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ #ifdef CONFIG_LAYER2_ROAMING ++ if (rtw_to_roaming(adapter) > 0) { /* join timeout caused by roaming */ ++ while(1) { ++ pmlmepriv->to_roaming--; ++ if (rtw_to_roaming(adapter) != 0) { /* try another */ ++ DBG_871X("%s try another roaming\n", __FUNCTION__); ++ if( _SUCCESS!=(do_join_r=rtw_do_join(adapter)) ) { ++ DBG_871X("%s roaming do_join return %d\n", __FUNCTION__ ,do_join_r); ++ continue; ++ } ++ break; ++ } else { ++#ifdef CONFIG_INTEL_WIDI ++ if(adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING) ++ { ++ _rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN); ++ intel_widi_wk_cmd(adapter, INTEL_WIDI_LISTEN_WK, NULL); ++ DBG_871X("change to widi listen\n"); ++ } ++#endif // CONFIG_INTEL_WIDI ++ DBG_871X("%s We've try roaming but fail\n", __FUNCTION__); ++ rtw_indicate_disconnect(adapter); ++ break; ++ } ++ } ++ ++ } else ++ #endif ++ { ++ rtw_indicate_disconnect(adapter); ++ free_scanqueue(pmlmepriv);//??? ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ //indicate disconnect for the case that join_timeout and check_fwstate != FW_LINKED ++ rtw_cfg80211_indicate_disconnect(adapter); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ ++#ifdef CONFIG_DRVEXT_MODULE_WSC ++ drvext_assoc_fail_indicate(&adapter->drvextpriv); ++#endif ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_unlock(NULL); ++#endif ++ ++_func_exit_; ++ ++} ++ ++/* ++* rtw_scan_timeout_handler - Timeout/Faliure handler for CMD SiteSurvey ++* @adapter: pointer to _adapter structure ++*/ ++void rtw_scan_timeout_handler (_adapter *adapter) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ ++ DBG_871X(FUNC_ADPT_FMT" fw_state=%x\n", FUNC_ADPT_ARG(adapter), get_fwstate(pmlmepriv)); ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY); ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ rtw_indicate_scan_done(adapter, _TRUE); ++ ++} ++ ++static void rtw_auto_scan_handler(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++ //auto site survey per 60sec ++ if(pmlmepriv->scan_interval >0) ++ { ++ pmlmepriv->scan_interval--; ++ if(pmlmepriv->scan_interval==0) ++ { ++/* ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ DBG_871X("exit %s when _FW_UNDER_SURVEY|_FW_UNDER_LINKING -> \n", __FUNCTION__); ++ return; ++ } ++ ++ if(pmlmepriv->sitesurveyctrl.traffic_busy == _TRUE) ++ { ++ DBG_871X("%s exit cause traffic_busy(%x)\n",__FUNCTION__, pmlmepriv->sitesurveyctrl.traffic_busy); ++ return; ++ } ++*/ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (rtw_buddy_adapter_up(padapter)) ++ { ++ if ((check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) || ++ (padapter->pbuddy_adapter->mlmepriv.LinkDetectInfo.bBusyTraffic == _TRUE)) ++ { ++ DBG_871X("%s, but buddy_intf is under scanning or linking or BusyTraffic\n", __FUNCTION__); ++ return; ++ } ++ } ++#endif ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ rtw_set_802_11_bssid_list_scan(padapter, NULL, 0); ++ ++ pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec ++ ++ } ++ ++ } ++ ++} ++ ++void rtw_dynamic_check_timer_handlder(_adapter *adapter) ++{ ++#ifdef CONFIG_AP_MODE ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++#endif //CONFIG_AP_MODE ++ struct registry_priv *pregistrypriv = &adapter->registrypriv; ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter = adapter->pbuddy_adapter; ++#endif ++ ++ if(!adapter) ++ return; ++ ++ if(adapter->hw_init_completed == _FALSE) ++ return; ++ ++ if ((adapter->bDriverStopped == _TRUE)||(adapter->bSurpriseRemoved== _TRUE)) ++ return; ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_adapter) ++ { ++ if(adapter->net_closed == _TRUE && pbuddy_adapter->net_closed == _TRUE) ++ { ++ return; ++ } ++ } ++ else ++#endif //CONFIG_CONCURRENT_MODE ++ if(adapter->net_closed == _TRUE) ++ { ++ return; ++ } ++ ++ rtw_dynamic_chk_wk_cmd(adapter); ++ ++ if(pregistrypriv->wifi_spec==1) ++ { ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++#endif ++ { ++ //auto site survey ++ rtw_auto_scan_handler(adapter); ++ } ++ } ++ ++#ifndef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++#ifdef CONFIG_AP_MODE ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ expire_timeout_chk(adapter); ++ } ++#endif ++#endif //!CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ ++#ifdef CONFIG_BR_EXT ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++#endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ if( adapter->pnetdev->br_port ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ if( rcu_dereference(adapter->pnetdev->rx_handler_data) ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ && (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ) ++ { ++ // expire NAT2.5 entry ++ void nat25_db_expire(_adapter *priv); ++ nat25_db_expire(adapter); ++ ++ if (adapter->pppoe_connection_in_progress > 0) { ++ adapter->pppoe_connection_in_progress--; ++ } ++ ++ // due to rtw_dynamic_check_timer_handlder() is called every 2 seconds ++ if (adapter->pppoe_connection_in_progress > 0) { ++ adapter->pppoe_connection_in_progress--; ++ } ++ } ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ ++#endif // CONFIG_BR_EXT ++ ++} ++ ++ ++#ifdef CONFIG_SET_SCAN_DENY_TIMER ++inline bool rtw_is_scan_deny(_adapter *adapter) ++{ ++ struct mlme_priv *mlmepriv = &adapter->mlmepriv; ++ return (ATOMIC_READ(&mlmepriv->set_scan_deny) != 0) ? _TRUE : _FALSE; ++} ++ ++inline void rtw_clear_scan_deny(_adapter *adapter) ++{ ++ struct mlme_priv *mlmepriv = &adapter->mlmepriv; ++ ATOMIC_SET(&mlmepriv->set_scan_deny, 0); ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter)); ++} ++ ++void rtw_set_scan_deny_timer_hdl(_adapter *adapter) ++{ ++ rtw_clear_scan_deny(adapter); ++} ++ ++void rtw_set_scan_deny(_adapter *adapter, u32 ms) ++{ ++ struct mlme_priv *mlmepriv = &adapter->mlmepriv; ++#ifdef CONFIG_CONCURRENT_MODE ++ struct mlme_priv *b_mlmepriv; ++#endif ++ ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter)); ++ ATOMIC_SET(&mlmepriv->set_scan_deny, 1); ++ _set_timer(&mlmepriv->set_scan_deny_timer, ms); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (!adapter->pbuddy_adapter) ++ return; ++ ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter->pbuddy_adapter)); ++ b_mlmepriv = &adapter->pbuddy_adapter->mlmepriv; ++ ATOMIC_SET(&b_mlmepriv->set_scan_deny, 1); ++ _set_timer(&b_mlmepriv->set_scan_deny_timer, ms); ++#endif ++ ++} ++#endif ++ ++#if defined(IEEE80211_SCAN_RESULT_EXPIRE) ++#define RTW_SCAN_RESULT_EXPIRE IEEE80211_SCAN_RESULT_EXPIRE/HZ*1000 -1000 //3000 -1000 ++#else ++#define RTW_SCAN_RESULT_EXPIRE 2000 ++#endif ++ ++#ifndef PLATFORM_FREEBSD ++/* ++* Select a new join candidate from the original @param candidate and @param competitor ++* @return _TRUE: candidate is updated ++* @return _FALSE: candidate is not updated ++*/ ++static int rtw_check_join_candidate(struct mlme_priv *pmlmepriv ++ , struct wlan_network **candidate, struct wlan_network *competitor) ++{ ++ int updated = _FALSE; ++ _adapter *adapter = container_of(pmlmepriv, _adapter, mlmepriv); ++ ++ ++ //check bssid, if needed ++ if(pmlmepriv->assoc_by_bssid==_TRUE) { ++ if(_rtw_memcmp(competitor->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN) ==_FALSE) ++ goto exit; ++ } ++ ++ //check ssid, if needed ++ if(pmlmepriv->assoc_ssid.Ssid && pmlmepriv->assoc_ssid.SsidLength) { ++ if( competitor->network.Ssid.SsidLength != pmlmepriv->assoc_ssid.SsidLength ++ || _rtw_memcmp(competitor->network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength) == _FALSE ++ ) ++ goto exit; ++ } ++ ++ if(rtw_is_desired_network(adapter, competitor) == _FALSE) ++ goto exit; ++ ++#ifdef CONFIG_LAYER2_ROAMING ++ if(rtw_to_roaming(adapter) > 0) { ++ if( rtw_get_passing_time_ms((u32)competitor->last_scanned) >= RTW_SCAN_RESULT_EXPIRE ++ || is_same_ess(&competitor->network, &pmlmepriv->cur_network.network) == _FALSE ++ ) ++ goto exit; ++ } ++#endif ++ ++ if(*candidate == NULL ||(*candidate)->network.Rssinetwork.Rssi ) ++ { ++ *candidate = competitor; ++ updated = _TRUE; ++ } ++ ++#if 0 ++ if(pmlmepriv->assoc_by_bssid==_TRUE) { // associate with bssid ++ if( (*candidate == NULL ||(*candidate)->network.Rssinetwork.Rssi ) ++ && _rtw_memcmp(competitor->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN)==_TRUE ++ ) { ++ *candidate = competitor; ++ updated = _TRUE; ++ } ++ } else if (pmlmepriv->assoc_ssid.SsidLength == 0 ) { // associate with ssid, but ssidlength is 0 ++ if( (*candidate == NULL ||(*candidate)->network.Rssinetwork.Rssi ) ) { ++ *candidate = competitor; ++ updated = _TRUE; ++ } ++ } else ++#ifdef CONFIG_LAYER2_ROAMING ++ if(rtw_to_roaming(adapter)) { // roaming ++ if( (*candidate == NULL ||(*candidate)->network.Rssinetwork.Rssi ) ++ && is_same_ess(&competitor->network, &pmlmepriv->cur_network.network) ++ //&&(!is_same_network(&competitor->network, &pmlmepriv->cur_network.network)) ++ && rtw_get_passing_time_ms((u32)competitor->last_scanned) < RTW_SCAN_RESULT_EXPIRE ++ && rtw_is_desired_network(adapter, competitor) ++ ) { ++ *candidate = competitor; ++ updated = _TRUE; ++ } ++ ++ } else ++#endif ++ { // associate with ssid ++ if( (*candidate == NULL ||(*candidate)->network.Rssinetwork.Rssi ) ++ && (competitor->network.Ssid.SsidLength==pmlmepriv->assoc_ssid.SsidLength) ++ &&((_rtw_memcmp(competitor->network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength)) == _TRUE) ++ && rtw_is_desired_network(adapter, competitor) ++ ) { ++ *candidate = competitor; ++ updated = _TRUE; ++ } ++ } ++#endif ++ ++ if(updated){ ++ DBG_871X("[by_bssid:%u][assoc_ssid:%s]" ++ #ifdef CONFIG_LAYER2_ROAMING ++ "[to_roaming:%u] " ++ #endif ++ "new candidate: %s("MAC_FMT", ch%u) rssi:%d\n", ++ pmlmepriv->assoc_by_bssid, ++ pmlmepriv->assoc_ssid.Ssid, ++ #ifdef CONFIG_LAYER2_ROAMING ++ rtw_to_roaming(adapter), ++ #endif ++ (*candidate)->network.Ssid.Ssid, ++ MAC_ARG((*candidate)->network.MacAddress), ++ (*candidate)->network.Configuration.DSConfig, ++ (int)(*candidate)->network.Rssi ++ ); ++ } ++ ++exit: ++ return updated; ++} ++ ++/* ++Calling context: ++The caller of the sub-routine will be in critical section... ++ ++The caller must hold the following spinlock ++ ++pmlmepriv->lock ++ ++ ++*/ ++ ++int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv ) ++{ ++ _irqL irqL; ++ int ret; ++ _list *phead; ++ _adapter *adapter; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ struct wlan_network *candidate = NULL; ++ u8 bSupportAntDiv = _FALSE; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ phead = get_list_head(queue); ++ adapter = (_adapter *)pmlmepriv->nic_hdl; ++ ++ pmlmepriv->pscanned = get_next( phead ); ++ ++ while (!rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) { ++ ++ pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list); ++ if(pnetwork==NULL){ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s return _FAIL:(pnetwork==NULL)\n", __FUNCTION__)); ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ pmlmepriv->pscanned = get_next(pmlmepriv->pscanned); ++ ++ #if 0 ++ DBG_871X("MacAddress:"MAC_FMT" ssid:%s\n", MAC_ARG(pnetwork->network.MacAddress), pnetwork->network.Ssid.Ssid); ++ #endif ++ ++ rtw_check_join_candidate(pmlmepriv, &candidate, pnetwork); ++ ++ } ++ ++ if(candidate == NULL) { ++ DBG_871X("%s: return _FAIL(candidate == NULL)\n", __FUNCTION__); ++ ret = _FAIL; ++ goto exit; ++ } else { ++ DBG_871X("%s: candidate: %s("MAC_FMT", ch:%u)\n", __FUNCTION__, ++ candidate->network.Ssid.Ssid, MAC_ARG(candidate->network.MacAddress), ++ candidate->network.Configuration.DSConfig); ++ } ++ ++ ++ // check for situation of _FW_LINKED ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ DBG_871X("%s: _FW_LINKED while ask_for_joinbss!!!\n", __FUNCTION__); ++ ++ #if 0 // for WPA/WPA2 authentication, wpa_supplicant will expect authentication from AP, it is needed to reconnect AP... ++ if(is_same_network(&pmlmepriv->cur_network.network, &candidate->network)) ++ { ++ DBG_871X("%s: _FW_LINKED and is same network, it needn't join again\n", __FUNCTION__); ++ ++ rtw_indicate_connect(adapter);//rtw_indicate_connect again ++ ++ ret = 2; ++ goto exit; ++ } ++ else ++ #endif ++ { ++ rtw_disassoc_cmd(adapter, 0, _TRUE); ++ rtw_indicate_disconnect(adapter); ++ rtw_free_assoc_resources(adapter, 0); ++ } ++ } ++ ++ #ifdef CONFIG_ANTENNA_DIVERSITY ++ rtw_hal_get_def_var(adapter, HAL_DEF_IS_SUPPORT_ANT_DIV, &(bSupportAntDiv)); ++ if(_TRUE == bSupportAntDiv) ++ { ++ u8 CurrentAntenna; ++ rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(CurrentAntenna)); ++ DBG_871X("#### Opt_Ant_(%s) , cur_Ant(%s)\n", ++ (2==candidate->network.PhyInfo.Optimum_antenna)?"A":"B", ++ (2==CurrentAntenna)?"A":"B" ++ ); ++ } ++ #endif ++ set_fwstate(pmlmepriv, _FW_UNDER_LINKING); ++ ret = rtw_joinbss_cmd(adapter, candidate); ++ ++exit: ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++_func_exit_; ++ ++ return ret; ++} ++#else ++int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv ) ++{ ++ _irqL irqL; ++ _list *phead; ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ u8 CurrentAntenna; ++#endif ++ unsigned char *dst_ssid, *src_ssid; ++ _adapter *adapter; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ struct wlan_network *pnetwork_max_rssi = NULL; ++ #ifdef CONFIG_LAYER2_ROAMING ++ struct wlan_network * roaming_candidate=NULL; ++ u32 cur_time=rtw_get_current_time(); ++ #endif ++ ++_func_enter_; ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ phead = get_list_head(queue); ++ adapter = (_adapter *)pmlmepriv->nic_hdl; ++ ++ pmlmepriv->pscanned = get_next( phead ); ++ ++ while (!rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) { ++ ++ pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list); ++ if(pnetwork==NULL){ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("(2)rtw_select_and_join_from_scanned_queue return _FAIL:(pnetwork==NULL)\n")); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ return _FAIL; ++ } ++ ++ dst_ssid = pnetwork->network.Ssid.Ssid; ++ src_ssid = pmlmepriv->assoc_ssid.Ssid; ++ ++ pmlmepriv->pscanned = get_next(pmlmepriv->pscanned); ++ ++ #if 0 ++ DBG_871X("MacAddress:"MAC_FMT" ssid:%s\n", MAC_ARG(pnetwork->network.MacAddress), pnetwork->network.Ssid.Ssid); ++ #endif ++ ++ if(pmlmepriv->assoc_by_bssid==_TRUE) ++ { ++ if(_rtw_memcmp(pnetwork->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN)==_TRUE) ++ { ++ //remove the condition @ 20081125 ++ //if((pmlmepriv->cur_network.network.InfrastructureMode==Ndis802_11AutoUnknown)|| ++ // pmlmepriv->cur_network.network.InfrastructureMode == pnetwork->network.InfrastructureMode) ++ // goto ask_for_joinbss; ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ if(is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) ++ { ++ //DBG_871X("select_and_join(1): _FW_LINKED and is same network, it needn't join again\n"); ++ ++ rtw_indicate_connect(adapter);//rtw_indicate_connect again ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ return 2; ++ } ++ else ++ { ++ rtw_disassoc_cmd(adapter, 0, _TRUE); ++ rtw_indicate_disconnect(adapter); ++ rtw_free_assoc_resources(adapter, 0); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ask_for_joinbss; ++ ++ } ++ } ++ else ++ { ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ask_for_joinbss; ++ } ++ ++ } ++ ++ } else if (pmlmepriv->assoc_ssid.SsidLength == 0) { ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ask_for_joinbss;//anyway, join first selected(dequeued) pnetwork if ssid_len=0 ++ ++ #ifdef CONFIG_LAYER2_ROAMING ++ } else if (rtw_to_roaming(adapter) > 0) { ++ ++ if( (roaming_candidate == NULL ||roaming_candidate->network.Rssinetwork.Rssi ) ++ && is_same_ess(&pnetwork->network, &pmlmepriv->cur_network.network) ++ //&&(!is_same_network(&pnetwork->network, &pmlmepriv->cur_network.network)) ++ && rtw_get_time_interval_ms((u32)pnetwork->last_scanned,cur_time) < 5000 ++ ) { ++ roaming_candidate = pnetwork; ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_, ++ DBG_871X ++ ("roaming_candidate???: %s("MAC_FMT")\n", ++ roaming_candidate->network.Ssid.Ssid, MAC_ARG(roaming_candidate->network.MacAddress) ) ++ //) ++ ; ++ } ++ continue; ++ #endif ++ ++ } else if ( (pnetwork->network.Ssid.SsidLength==pmlmepriv->assoc_ssid.SsidLength) ++ &&((_rtw_memcmp(dst_ssid, src_ssid, pmlmepriv->assoc_ssid.SsidLength)) == _TRUE) ++ ) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("dst_ssid=%s, src_ssid=%s \n", dst_ssid, src_ssid)); ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(CurrentAntenna)); ++ DBG_871X("#### dst_ssid=(%s) Opt_Ant_(%s) , cur_Ant(%s)\n", dst_ssid, ++ (2==pnetwork->network.PhyInfo.Optimum_antenna)?"A":"B", ++ (2==CurrentAntenna)?"A":"B"); ++#endif ++ //remove the condition @ 20081125 ++ //if((pmlmepriv->cur_network.network.InfrastructureMode==Ndis802_11AutoUnknown)|| ++ // pmlmepriv->cur_network.network.InfrastructureMode == pnetwork->network.InfrastructureMode) ++ //{ ++ // _rtw_memcpy(pmlmepriv->assoc_bssid, pnetwork->network.MacAddress, ETH_ALEN); ++ // goto ask_for_joinbss; ++ //} ++ ++ if(pmlmepriv->assoc_by_rssi==_TRUE)//if the ssid is the same, select the bss which has the max rssi ++ { ++ if( NULL==pnetwork_max_rssi|| pnetwork->network.Rssi > pnetwork_max_rssi->network.Rssi) ++ pnetwork_max_rssi = pnetwork; ++ } ++ else if(rtw_is_desired_network(adapter, pnetwork) == _TRUE) ++ { ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++#if 0 ++ if(is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) ++ { ++ DBG_871X("select_and_join(2): _FW_LINKED and is same network, it needn't join again\n"); ++ ++ rtw_indicate_connect(adapter);//rtw_indicate_connect again ++ ++ return 2; ++ } ++ else ++#endif ++ { ++ rtw_disassoc_cmd(adapter, 0, _TRUE); ++ //rtw_indicate_disconnect(adapter);// ++ rtw_free_assoc_resources(adapter, 0); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ask_for_joinbss; ++ } ++ } ++ else ++ { ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ goto ask_for_joinbss; ++ } ++ ++ } ++ ++ ++ } ++ ++ } ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ #ifdef CONFIG_LAYER2_ROAMING ++ if(rtw_to_roaming(adapter) > 0 && roaming_candidate ){ ++ pnetwork=roaming_candidate; ++ DBG_871X("select_and_join_from_scanned_queue: roaming_candidate: %s("MAC_FMT")\n", ++ pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress)); ++ goto ask_for_joinbss; ++ } ++ #endif ++ ++ if((pmlmepriv->assoc_by_rssi==_TRUE) && (pnetwork_max_rssi!=NULL)) ++ { ++ pnetwork = pnetwork_max_rssi; ++ DBG_871X("select_and_join_from_scanned_queue: pnetwork_max_rssi: %s("MAC_FMT")\n", ++ pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress)); ++ goto ask_for_joinbss; ++ } ++ ++ DBG_871X("(1)rtw_select_and_join_from_scanned_queue return _FAIL\n"); ++ ++_func_exit_; ++ ++ return _FAIL; ++ ++ask_for_joinbss: ++ ++_func_exit_; ++ ++ return rtw_joinbss_cmd(adapter, pnetwork); ++ ++} ++#endif //PLATFORM_FREEBSD ++ ++ ++sint rtw_set_auth(_adapter * adapter,struct security_priv *psecuritypriv) ++{ ++ struct cmd_obj* pcmd; ++ struct setauth_parm *psetauthparm; ++ struct cmd_priv *pcmdpriv=&(adapter->cmdpriv); ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; //try again ++ goto exit; ++ } ++ ++ psetauthparm=(struct setauth_parm*)rtw_zmalloc(sizeof(struct setauth_parm)); ++ if(psetauthparm==NULL){ ++ rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memset(psetauthparm, 0, sizeof(struct setauth_parm)); ++ psetauthparm->mode=(unsigned char)psecuritypriv->dot11AuthAlgrthm; ++ ++ pcmd->cmdcode = _SetAuth_CMD_; ++ pcmd->parmbuf = (unsigned char *)psetauthparm; ++ pcmd->cmdsz = (sizeof(struct setauth_parm)); ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ ++ _rtw_init_listhead(&pcmd->list); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("after enqueue set_auth_cmd, auth_mode=%x\n", psecuritypriv->dot11AuthAlgrthm)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++ ++sint rtw_set_key(_adapter * adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx) ++{ ++ u8 keylen; ++ struct cmd_obj *pcmd; ++ struct setkey_parm *psetkeyparm; ++ struct cmd_priv *pcmdpriv = &(adapter->cmdpriv); ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; //try again ++ goto exit; ++ } ++ psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm)); ++ if(psetkeyparm==NULL){ ++ rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm)); ++ ++ if(psecuritypriv->dot11AuthAlgrthm ==dot11AuthAlgrthm_8021X){ ++ psetkeyparm->algorithm=(unsigned char)psecuritypriv->dot118021XGrpPrivacy; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=(unsigned char)psecuritypriv->dot118021XGrpPrivacy=%d \n", psetkeyparm->algorithm)); ++ } ++ else{ ++ psetkeyparm->algorithm=(u8)psecuritypriv->dot11PrivacyAlgrthm; ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=(u8)psecuritypriv->dot11PrivacyAlgrthm=%d \n", psetkeyparm->algorithm)); ++ ++ } ++ psetkeyparm->keyid = (u8)keyid;//0~3 ++ psetkeyparm->set_tx = set_tx; ++ if (is_wep_enc(psetkeyparm->algorithm)) ++ psecuritypriv->key_mask |= BIT(psetkeyparm->keyid); ++ ++ DBG_871X("==> rtw_set_key algorithm(%x),keyid(%x),key_mask(%x)\n",psetkeyparm->algorithm,psetkeyparm->keyid, psecuritypriv->key_mask); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=%d psetkeyparm->keyid=(u8)keyid=%d \n",psetkeyparm->algorithm, keyid)); ++ ++ switch(psetkeyparm->algorithm){ ++ ++ case _WEP40_: ++ keylen=5; ++ _rtw_memcpy(&(psetkeyparm->key[0]), &(psecuritypriv->dot11DefKey[keyid].skey[0]), keylen); ++ break; ++ case _WEP104_: ++ keylen=13; ++ _rtw_memcpy(&(psetkeyparm->key[0]), &(psecuritypriv->dot11DefKey[keyid].skey[0]), keylen); ++ break; ++ case _TKIP_: ++ keylen=16; ++ _rtw_memcpy(&psetkeyparm->key, &psecuritypriv->dot118021XGrpKey[keyid], keylen); ++ psetkeyparm->grpkey=1; ++ break; ++ case _AES_: ++ keylen=16; ++ _rtw_memcpy(&psetkeyparm->key, &psecuritypriv->dot118021XGrpKey[keyid], keylen); ++ psetkeyparm->grpkey=1; ++ break; ++ default: ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key:psecuritypriv->dot11PrivacyAlgrthm = %x (must be 1 or 2 or 4 or 5)\n",psecuritypriv->dot11PrivacyAlgrthm)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ ++ pcmd->cmdcode = _SetKey_CMD_; ++ pcmd->parmbuf = (u8 *)psetkeyparm; ++ pcmd->cmdsz = (sizeof(struct setkey_parm)); ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ ++ _rtw_init_listhead(&pcmd->list); ++ ++ //_rtw_init_sema(&(pcmd->cmd_sem), 0); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++_func_exit_; ++ return res; ++ ++} ++ ++ ++//adjust IEs for rtw_joinbss_cmd in WMM ++int rtw_restruct_wmm_ie(_adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len, uint initial_out_len) ++{ ++ unsigned int ielength=0; ++ unsigned int i, j; ++ ++ i = 12; //after the fixed IE ++ while(i=0 :if there is pre-auth key, and return the entry id ++// ++// ++ ++static int SecIsInPMKIDList(_adapter *Adapter, u8 *bssid) ++{ ++ struct security_priv *psecuritypriv=&Adapter->securitypriv; ++ int i=0; ++ ++ do ++ { ++ if( ( psecuritypriv->PMKIDList[i].bUsed ) && ++ ( _rtw_memcmp( psecuritypriv->PMKIDList[i].Bssid, bssid, ETH_ALEN ) == _TRUE ) ) ++ { ++ break; ++ } ++ else ++ { ++ i++; ++ //continue; ++ } ++ ++ }while(isecuritypriv; ++ ++ if(ie[13]<=20){ ++ // The RSN IE didn't include the PMK ID, append the PMK information ++ ie[ie_len]=1; ++ ie_len++; ++ ie[ie_len]=0; //PMKID count = 0x0100 ++ ie_len++; ++ _rtw_memcpy( &ie[ie_len], &psecuritypriv->PMKIDList[iEntry].PMKID, 16); ++ ++ ie_len+=16; ++ ie[13]+=18;//PMKID length = 2+16 ++ ++ } ++ return (ie_len); ++ ++} ++sint rtw_restruct_sec_ie(_adapter *adapter,u8 *in_ie, u8 *out_ie, uint in_len) ++{ ++ u8 authmode, securitytype, match; ++ u8 sec_ie[255], uncst_oui[4], bkup_ie[255]; ++ u8 wpa_oui[4]={0x0, 0x50, 0xf2, 0x01}; ++ uint ielength, cnt, remove_cnt; ++ int iEntry; ++ ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ struct security_priv *psecuritypriv=&adapter->securitypriv; ++ uint ndisauthmode=psecuritypriv->ndisauthtype; ++ uint ndissecuritytype = psecuritypriv->ndisencryptstatus; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ++ ("+rtw_restruct_sec_ie: ndisauthmode=%d ndissecuritytype=%d\n", ++ ndisauthmode, ndissecuritytype)); ++ ++ //copy fixed ie only ++ _rtw_memcpy(out_ie, in_ie,12); ++ ielength=12; ++ if((ndisauthmode==Ndis802_11AuthModeWPA)||(ndisauthmode==Ndis802_11AuthModeWPAPSK)) ++ authmode=_WPA_IE_ID_; ++ if((ndisauthmode==Ndis802_11AuthModeWPA2)||(ndisauthmode==Ndis802_11AuthModeWPA2PSK)) ++ authmode=_WPA2_IE_ID_; ++ ++ if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) ++ { ++ _rtw_memcpy(out_ie+ielength, psecuritypriv->wps_ie, psecuritypriv->wps_ie_len); ++ ++ ielength += psecuritypriv->wps_ie_len; ++ } ++ else if((authmode==_WPA_IE_ID_)||(authmode==_WPA2_IE_ID_)) ++ { ++ //copy RSN or SSN ++ _rtw_memcpy(&out_ie[ielength], &psecuritypriv->supplicant_ie[0], psecuritypriv->supplicant_ie[1]+2); ++ /* debug for CONFIG_IEEE80211W ++ { ++ int jj; ++ printk("supplicant_ie_length=%d &&&&&&&&&&&&&&&&&&&\n", psecuritypriv->supplicant_ie[1]+2); ++ for(jj=0; jj < psecuritypriv->supplicant_ie[1]+2; jj++) ++ printk(" %02x ", psecuritypriv->supplicant_ie[jj]); ++ printk("\n"); ++ }*/ ++ ielength+=psecuritypriv->supplicant_ie[1]+2; ++ rtw_report_sec_ie(adapter, authmode, psecuritypriv->supplicant_ie); ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ drvext_report_sec_ie(&adapter->drvextpriv, authmode, sec_ie); ++#endif ++ } ++ ++ iEntry = SecIsInPMKIDList(adapter, pmlmepriv->assoc_bssid); ++ if(iEntry<0) ++ { ++ return ielength; ++ } ++ else ++ { ++ if(authmode == _WPA2_IE_ID_) ++ { ++ ielength=rtw_append_pmkid(adapter, iEntry, out_ie, ielength); ++ } ++ } ++ ++_func_exit_; ++ ++ return ielength; ++} ++ ++void rtw_init_registrypriv_dev_network( _adapter* adapter) ++{ ++ struct registry_priv* pregistrypriv = &adapter->registrypriv; ++ struct eeprom_priv* peepriv = &adapter->eeprompriv; ++ WLAN_BSSID_EX *pdev_network = &pregistrypriv->dev_network; ++ u8 *myhwaddr = myid(peepriv); ++ ++_func_enter_; ++ ++ _rtw_memcpy(pdev_network->MacAddress, myhwaddr, ETH_ALEN); ++ ++ _rtw_memcpy(&pdev_network->Ssid, &pregistrypriv->ssid, sizeof(NDIS_802_11_SSID)); ++ ++ pdev_network->Configuration.Length=sizeof(NDIS_802_11_CONFIGURATION); ++ pdev_network->Configuration.BeaconPeriod = 100; ++ pdev_network->Configuration.FHConfig.Length = 0; ++ pdev_network->Configuration.FHConfig.HopPattern = 0; ++ pdev_network->Configuration.FHConfig.HopSet = 0; ++ pdev_network->Configuration.FHConfig.DwellTime = 0; ++ ++ ++_func_exit_; ++ ++} ++ ++void rtw_update_registrypriv_dev_network(_adapter* adapter) ++{ ++ int sz=0; ++ struct registry_priv* pregistrypriv = &adapter->registrypriv; ++ WLAN_BSSID_EX *pdev_network = &pregistrypriv->dev_network; ++ struct security_priv* psecuritypriv = &adapter->securitypriv; ++ struct wlan_network *cur_network = &adapter->mlmepriv.cur_network; ++ //struct xmit_priv *pxmitpriv = &adapter->xmitpriv; ++ ++_func_enter_; ++ ++#if 0 ++ pxmitpriv->vcs_setting = pregistrypriv->vrtl_carrier_sense; ++ pxmitpriv->vcs = pregistrypriv->vcs_type; ++ pxmitpriv->vcs_type = pregistrypriv->vcs_type; ++ //pxmitpriv->rts_thresh = pregistrypriv->rts_thresh; ++ pxmitpriv->frag_len = pregistrypriv->frag_thresh; ++ ++ adapter->qospriv.qos_option = pregistrypriv->wmm_enable; ++#endif ++ ++ pdev_network->Privacy = (psecuritypriv->dot11PrivacyAlgrthm > 0 ? 1 : 0) ; // adhoc no 802.1x ++ ++ pdev_network->Rssi = 0; ++ ++ switch(pregistrypriv->wireless_mode) ++ { ++ case WIRELESS_11B: ++ pdev_network->NetworkTypeInUse = (Ndis802_11DS); ++ break; ++ case WIRELESS_11G: ++ case WIRELESS_11BG: ++ case WIRELESS_11_24N: ++ case WIRELESS_11G_24N: ++ case WIRELESS_11BG_24N: ++ pdev_network->NetworkTypeInUse = (Ndis802_11OFDM24); ++ break; ++ case WIRELESS_11A: ++ case WIRELESS_11A_5N: ++ pdev_network->NetworkTypeInUse = (Ndis802_11OFDM5); ++ break; ++ case WIRELESS_11ABGN: ++ if(pregistrypriv->channel > 14) ++ pdev_network->NetworkTypeInUse = (Ndis802_11OFDM5); ++ else ++ pdev_network->NetworkTypeInUse = (Ndis802_11OFDM24); ++ break; ++ default : ++ // TODO ++ break; ++ } ++ ++ pdev_network->Configuration.DSConfig = (pregistrypriv->channel); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("pregistrypriv->channel=%d, pdev_network->Configuration.DSConfig=0x%x\n", pregistrypriv->channel, pdev_network->Configuration.DSConfig)); ++ ++ if(cur_network->network.InfrastructureMode == Ndis802_11IBSS) ++ pdev_network->Configuration.ATIMWindow = (0); ++ ++ pdev_network->InfrastructureMode = (cur_network->network.InfrastructureMode); ++ ++ // 1. Supported rates ++ // 2. IE ++ ++ //rtw_set_supported_rate(pdev_network->SupportedRates, pregistrypriv->wireless_mode) ; // will be called in rtw_generate_ie ++ sz = rtw_generate_ie(pregistrypriv); ++ ++ pdev_network->IELength = sz; ++ ++ pdev_network->Length = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX *)pdev_network); ++ ++ //notes: translate IELength & Length after assign the Length to cmdsz in createbss_cmd(); ++ //pdev_network->IELength = cpu_to_le32(sz); ++ ++_func_exit_; ++ ++} ++ ++void rtw_get_encrypt_decrypt_from_registrypriv(_adapter* adapter) ++{ ++_func_enter_; ++ ++ ++_func_exit_; ++ ++} ++ ++//the fucntion is at passive_level ++void rtw_joinbss_reset(_adapter *padapter) ++{ ++ u8 threshold; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++#ifdef CONFIG_80211N_HT ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++#endif ++ ++ //todo: if you want to do something io/reg/hw setting before join_bss, please add code here ++ ++ ++ ++ ++#ifdef CONFIG_80211N_HT ++ ++ pmlmepriv->num_FortyMHzIntolerant = 0; ++ ++ pmlmepriv->num_sta_no_ht = 0; ++ ++ phtpriv->ampdu_enable = _FALSE;//reset to disabled ++ ++#ifdef CONFIG_USB_HCI ++ // TH=1 => means that invalidate usb rx aggregation ++ // TH=0 => means that validate usb rx aggregation, use init value. ++ if(phtpriv->ht_option) ++ { ++ if(padapter->registrypriv.wifi_spec==1) ++ threshold = 1; ++ else ++ threshold = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold)); ++ } ++ else ++ { ++ threshold = 1; ++ rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold)); ++ } ++#endif ++ ++#endif ++ ++} ++ ++ ++#ifdef CONFIG_80211N_HT ++ ++//the fucntion is >= passive_level ++unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel) ++{ ++ u32 ielen, out_len; ++ unsigned char *p, *pframe; ++ struct rtw_ieee80211_ht_cap ht_capie; ++ unsigned char WMM_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00}; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv= &pmlmepriv->qospriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ u8 cbw40_enable = 0; ++ ++ phtpriv->ht_option = _FALSE; ++ ++ p = rtw_get_ie(in_ie+12, _HT_CAPABILITY_IE_, &ielen, in_len-12); ++ ++ if(p && ielen>0) ++ { ++ if(pqospriv->qos_option == 0) ++ { ++ out_len = *pout_len; ++ pframe = rtw_set_ie(out_ie+out_len, _VENDOR_SPECIFIC_IE_, ++ _WMM_IE_Length_, WMM_IE, pout_len); ++ ++ pqospriv->qos_option = 1; ++ } ++ ++ out_len = *pout_len; ++ ++ _rtw_memset(&ht_capie, 0, sizeof(struct rtw_ieee80211_ht_cap)); ++ ++ ht_capie.cap_info = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_TX_STBC | ++ IEEE80211_HT_CAP_DSSSCCK40; ++ //if insert module set only support 20MHZ, don't add the 40MHZ and SGI_40 ++ if( channel > 14 ) ++ { ++ if( pregpriv->cbw40_enable & BIT(1) ) ++ cbw40_enable = 1; ++ } ++ else ++ if( pregpriv->cbw40_enable & BIT(0) ) ++ cbw40_enable = 1; ++ ++ if ( cbw40_enable != 0 ) ++ ht_capie.cap_info |= IEEE80211_HT_CAP_SUP_WIDTH | IEEE80211_HT_CAP_SGI_40; ++ ++ ++ ++ { ++ u32 rx_packet_offset, max_recvbuf_sz; ++ rtw_hal_get_def_var(padapter, HAL_DEF_RX_PACKET_OFFSET, &rx_packet_offset); ++ rtw_hal_get_def_var(padapter, HAL_DEF_MAX_RECVBUF_SZ, &max_recvbuf_sz); ++ //if(max_recvbuf_sz-rx_packet_offset>(8191-256)) { ++ // DBG_871X("%s IEEE80211_HT_CAP_MAX_AMSDU is set\n", __FUNCTION__); ++ // ht_capie.cap_info = ht_capie.cap_info |IEEE80211_HT_CAP_MAX_AMSDU; ++ //} ++ } ++ ++ ht_capie.ampdu_params_info = (IEEE80211_HT_CAP_AMPDU_FACTOR&0x03); ++ ++ if(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_ ) ++ ht_capie.ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&(0x07<<2)); ++ else ++ ht_capie.ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&0x00); ++ ++ ++ pframe = rtw_set_ie(out_ie+out_len, _HT_CAPABILITY_IE_, ++ sizeof(struct rtw_ieee80211_ht_cap), (unsigned char*)&ht_capie, pout_len); ++ ++ ++ //_rtw_memcpy(out_ie+out_len, p, ielen+2);//gtest ++ //*pout_len = *pout_len + (ielen+2); ++ ++ ++ phtpriv->ht_option = _TRUE; ++ ++ p = rtw_get_ie(in_ie+12, _HT_ADD_INFO_IE_, &ielen, in_len-12); ++ if(p && (ielen==sizeof(struct ieee80211_ht_addt_info))) ++ { ++ out_len = *pout_len; ++ pframe = rtw_set_ie(out_ie+out_len, _HT_ADD_INFO_IE_, ielen, p+2 , pout_len); ++ } ++ ++ } ++ ++ return (phtpriv->ht_option); ++ ++} ++ ++//the fucntion is > passive_level (in critical_section) ++void rtw_update_ht_cap(_adapter *padapter, u8 *pie, uint ie_len, u8 channel) ++{ ++ u8 *p, max_ampdu_sz; ++ int len; ++ //struct sta_info *bmc_sta, *psta; ++ struct rtw_ieee80211_ht_cap *pht_capie; ++ struct ieee80211_ht_addt_info *pht_addtinfo; ++ //struct recv_reorder_ctrl *preorder_ctrl; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ //struct recv_priv *precvpriv = &padapter->recvpriv; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ //struct wlan_network *pcur_network = &(pmlmepriv->cur_network);; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 cbw40_enable=0; ++ ++ if(!phtpriv->ht_option) ++ return; ++ ++ if ((!pmlmeinfo->HT_info_enable) || (!pmlmeinfo->HT_caps_enable)) ++ return; ++ ++ DBG_871X("+rtw_update_ht_cap()\n"); ++ ++ //maybe needs check if ap supports rx ampdu. ++ if((phtpriv->ampdu_enable==_FALSE) &&(pregistrypriv->ampdu_enable==1)) ++ { ++ //In the wifi cert. test, the test Lab should turn off the AP's RX AMPDU. client doen't need to close the TX AMPDU ++ /*if(pregistrypriv->wifi_spec==1) ++ { ++ phtpriv->ampdu_enable = _FALSE; ++ } ++ else*/ ++ { ++ phtpriv->ampdu_enable = _TRUE; ++ } ++ } ++ else if(pregistrypriv->ampdu_enable==2) ++ { ++ phtpriv->ampdu_enable = _TRUE; ++ } ++ ++ ++ //check Max Rx A-MPDU Size ++ len = 0; ++ p = rtw_get_ie(pie+sizeof (NDIS_802_11_FIXED_IEs), _HT_CAPABILITY_IE_, &len, ie_len-sizeof (NDIS_802_11_FIXED_IEs)); ++ if(p && len>0) ++ { ++ pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2); ++ max_ampdu_sz = (pht_capie->ampdu_params_info & IEEE80211_HT_CAP_AMPDU_FACTOR); ++ max_ampdu_sz = 1 << (max_ampdu_sz+3); // max_ampdu_sz (kbytes); ++ ++ //DBG_871X("rtw_update_ht_cap(): max_ampdu_sz=%d\n", max_ampdu_sz); ++ phtpriv->rx_ampdu_maxlen = max_ampdu_sz; ++ ++ } ++ ++ ++ len=0; ++ p = rtw_get_ie(pie+sizeof (NDIS_802_11_FIXED_IEs), _HT_ADD_INFO_IE_, &len, ie_len-sizeof (NDIS_802_11_FIXED_IEs)); ++ if(p && len>0) ++ { ++ pht_addtinfo = (struct ieee80211_ht_addt_info *)(p+2); ++ //todo: ++ } ++ ++ if( channel > 14 ) ++ { ++ if( pregistrypriv->cbw40_enable & BIT(1) ) ++ cbw40_enable = 1; ++ } ++ else ++ if( pregistrypriv->cbw40_enable & BIT(0) ) ++ cbw40_enable = 1; ++ ++ ++ //update cur_bwmode & cur_ch_offset ++ if ((cbw40_enable) && ++ (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & BIT(1)) && ++ (pmlmeinfo->HT_info.infos[0] & BIT(2))) ++ { ++ int i; ++ u8 rf_type; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ //update the MCS rates ++ for (i = 0; i < 16; i++) ++ { ++ if((rf_type == RF_1T1R) || (rf_type == RF_1T2R)) ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ } ++ else ++ { ++ #ifdef CONFIG_DISABLE_MCS13TO15 ++ if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && pregistrypriv->wifi_spec != 1 ) ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R_MCS13TO15_OFF[i]; ++ } ++ else ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i]; ++ #else ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i]; ++ #endif //CONFIG_DISABLE_MCS13TO15 ++ } ++ #ifdef RTL8192C_RECONFIG_TO_1T1R ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ } ++ #endif ++ ++ if(pregistrypriv->special_rf_path) ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ ++ } ++ //switch to the 40M Hz mode accoring to the AP ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ switch ((pmlmeinfo->HT_info.infos[0] & 0x3)) ++ { ++ case HT_EXTCHNL_OFFSET_UPPER: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ ++ case HT_EXTCHNL_OFFSET_LOWER: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ ++ default: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ } ++ } ++ ++ // ++ // Config SM Power Save setting ++ // ++ pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2; ++ if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC) ++ { ++ /*u8 i; ++ //update the MCS rates ++ for (i = 0; i < 16; i++) ++ { ++ pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ }*/ ++ DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__); ++ } ++ ++ // ++ // Config current HT Protection mode. ++ // ++ pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3; ++ ++ ++ ++#if 0 //move to rtw_update_sta_info_client() ++ //for A-MPDU Rx reordering buffer control for bmc_sta & sta_info ++ //if A-MPDU Rx is enabled, reseting rx_ordering_ctrl wstart_b(indicate_seq) to default value=0xffff ++ //todo: check if AP can send A-MPDU packets ++ bmc_sta = rtw_get_bcmc_stainfo(padapter); ++ if(bmc_sta) ++ { ++ for(i=0; i < 16 ; i++) ++ { ++ //preorder_ctrl = &precvpriv->recvreorder_ctrl[i]; ++ preorder_ctrl = &bmc_sta->recvreorder_ctrl[i]; ++ preorder_ctrl->enable = _FALSE; ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ preorder_ctrl->wend_b= 0xffff; ++ preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32 ++ } ++ } ++ ++ psta = rtw_get_stainfo(&padapter->stapriv, pcur_network->network.MacAddress); ++ if(psta) ++ { ++ for(i=0; i < 16 ; i++) ++ { ++ //preorder_ctrl = &precvpriv->recvreorder_ctrl[i]; ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ preorder_ctrl->enable = _FALSE; ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ preorder_ctrl->wend_b= 0xffff; ++ preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32 ++ } ++ } ++#endif ++ ++} ++ ++void rtw_issue_addbareq_cmd(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ u8 issued; ++ int priority; ++ struct sta_info *psta=NULL; ++ struct ht_priv *phtpriv; ++ struct pkt_attrib *pattrib =&pxmitframe->attrib; ++ s32 bmcst = IS_MCAST(pattrib->ra); ++ ++ if(bmcst || (padapter->mlmepriv.LinkDetectInfo.bTxBusyTraffic == _FALSE)) ++ return; ++ ++ priority = pattrib->priority; ++ ++ if (pattrib->psta) ++ psta = pattrib->psta; ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra); ++ } ++ ++ if(psta==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return; ++ } ++ ++ ++ phtpriv = &psta->htpriv; ++ ++ if((phtpriv->ht_option==_TRUE) && (phtpriv->ampdu_enable==_TRUE)) ++ { ++ issued = (phtpriv->agg_enable_bitmap>>priority)&0x1; ++ issued |= (phtpriv->candidate_tid_bitmap>>priority)&0x1; ++ ++ if(0==issued) ++ { ++ DBG_871X("rtw_issue_addbareq_cmd, p=%d\n", priority); ++ psta->htpriv.candidate_tid_bitmap |= BIT((u8)priority); ++ rtw_addbareq_cmd(padapter,(u8) priority, pattrib->ra); ++ } ++ } ++ ++} ++ ++#endif ++ ++#ifdef CONFIG_LAYER2_ROAMING ++inline void rtw_set_roaming(_adapter *adapter, u8 to_roaming) ++{ ++ if (to_roaming == 0) ++ adapter->mlmepriv.to_join = _FALSE; ++ adapter->mlmepriv.to_roaming = to_roaming; ++} ++ ++inline u8 rtw_to_roaming(_adapter *adapter) ++{ ++ return adapter->mlmepriv.to_roaming; ++} ++ ++void rtw_roaming(_adapter *padapter, struct wlan_network *tgt_network) ++{ ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _rtw_roaming(padapter, tgt_network); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++void _rtw_roaming(_adapter *padapter, struct wlan_network *tgt_network) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ int do_join_r; ++ ++ struct wlan_network *pnetwork; ++ ++ if(tgt_network != NULL) ++ pnetwork = tgt_network; ++ else ++ pnetwork = &pmlmepriv->cur_network; ++ ++ if(0 < rtw_to_roaming(padapter)) { ++ DBG_871X("roaming from %s("MAC_FMT"), length:%d\n", ++ pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress), ++ pnetwork->network.Ssid.SsidLength); ++ _rtw_memcpy(&pmlmepriv->assoc_ssid, &pnetwork->network.Ssid, sizeof(NDIS_802_11_SSID)); ++ ++ pmlmepriv->assoc_by_bssid = _FALSE; ++ ++ while(1) { ++ if( _SUCCESS==(do_join_r=rtw_do_join(padapter)) ) { ++ break; ++ } else { ++ DBG_871X("roaming do_join return %d\n", do_join_r); ++ pmlmepriv->to_roaming--; ++ ++ if(0< rtw_to_roaming(padapter)) { ++ continue; ++ } else { ++ DBG_871X("%s(%d) -to roaming fail, indicate_disconnect\n", __FUNCTION__,__LINE__); ++ rtw_indicate_disconnect(padapter); ++ break; ++ } ++ } ++ } ++ } ++ ++} ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++sint rtw_buddy_adapter_up(_adapter *padapter) ++{ ++ sint res = _FALSE; ++ ++ if(padapter == NULL) ++ return res; ++ ++ ++ if(padapter->pbuddy_adapter == NULL) ++ { ++ res = _FALSE; ++ } ++ else if( (padapter->pbuddy_adapter->bDriverStopped) || (padapter->pbuddy_adapter->bSurpriseRemoved) || ++ (padapter->pbuddy_adapter->bup == _FALSE) || (padapter->pbuddy_adapter->hw_init_completed == _FALSE)) ++ { ++ res = _FALSE; ++ } ++ else ++ { ++ res = _TRUE; ++ } ++ ++ return res; ++ ++} ++ ++sint check_buddy_fwstate(_adapter *padapter, sint state) ++{ ++ if(padapter == NULL) ++ return _FALSE; ++ ++ if(padapter->pbuddy_adapter == NULL) ++ return _FALSE; ++ ++ if ((state == WIFI_FW_NULL_STATE) && ++ (padapter->pbuddy_adapter->mlmepriv.fw_state == WIFI_FW_NULL_STATE)) ++ return _TRUE; ++ ++ if (padapter->pbuddy_adapter->mlmepriv.fw_state & state) ++ return _TRUE; ++ ++ return _FALSE; ++} ++#endif //CONFIG_CONCURRENT_MODE +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c +new file mode 100644 +index 000000000000..b7716ae00f7f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c +@@ -0,0 +1,13599 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_MLME_EXT_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct mlme_handler mlme_sta_tbl[]={ ++ {WIFI_ASSOCREQ, "OnAssocReq", &OnAssocReq}, ++ {WIFI_ASSOCRSP, "OnAssocRsp", &OnAssocRsp}, ++ {WIFI_REASSOCREQ, "OnReAssocReq", &OnAssocReq}, ++ {WIFI_REASSOCRSP, "OnReAssocRsp", &OnAssocRsp}, ++ {WIFI_PROBEREQ, "OnProbeReq", &OnProbeReq}, ++ {WIFI_PROBERSP, "OnProbeRsp", &OnProbeRsp}, ++ ++ /*---------------------------------------------------------- ++ below 2 are reserved ++ -----------------------------------------------------------*/ ++ {0, "DoReserved", &DoReserved}, ++ {0, "DoReserved", &DoReserved}, ++ {WIFI_BEACON, "OnBeacon", &OnBeacon}, ++ {WIFI_ATIM, "OnATIM", &OnAtim}, ++ {WIFI_DISASSOC, "OnDisassoc", &OnDisassoc}, ++ {WIFI_AUTH, "OnAuth", &OnAuthClient}, ++ {WIFI_DEAUTH, "OnDeAuth", &OnDeAuth}, ++ {WIFI_ACTION, "OnAction", &OnAction}, ++}; ++ ++#ifdef _CONFIG_NATIVEAP_MLME_ ++struct mlme_handler mlme_ap_tbl[]={ ++ {WIFI_ASSOCREQ, "OnAssocReq", &OnAssocReq}, ++ {WIFI_ASSOCRSP, "OnAssocRsp", &OnAssocRsp}, ++ {WIFI_REASSOCREQ, "OnReAssocReq", &OnAssocReq}, ++ {WIFI_REASSOCRSP, "OnReAssocRsp", &OnAssocRsp}, ++ {WIFI_PROBEREQ, "OnProbeReq", &OnProbeReq}, ++ {WIFI_PROBERSP, "OnProbeRsp", &OnProbeRsp}, ++ ++ /*---------------------------------------------------------- ++ below 2 are reserved ++ -----------------------------------------------------------*/ ++ {0, "DoReserved", &DoReserved}, ++ {0, "DoReserved", &DoReserved}, ++ {WIFI_BEACON, "OnBeacon", &OnBeacon}, ++ {WIFI_ATIM, "OnATIM", &OnAtim}, ++ {WIFI_DISASSOC, "OnDisassoc", &OnDisassoc}, ++ {WIFI_AUTH, "OnAuth", &OnAuth}, ++ {WIFI_DEAUTH, "OnDeAuth", &OnDeAuth}, ++ {WIFI_ACTION, "OnAction", &OnAction}, ++}; ++#endif ++ ++struct action_handler OnAction_tbl[]={ ++ {RTW_WLAN_CATEGORY_SPECTRUM_MGMT, "ACTION_SPECTRUM_MGMT", on_action_spct}, ++ {RTW_WLAN_CATEGORY_QOS, "ACTION_QOS", &OnAction_qos}, ++ {RTW_WLAN_CATEGORY_DLS, "ACTION_DLS", &OnAction_dls}, ++ {RTW_WLAN_CATEGORY_BACK, "ACTION_BACK", &OnAction_back}, ++ {RTW_WLAN_CATEGORY_PUBLIC, "ACTION_PUBLIC", on_action_public}, ++ {RTW_WLAN_CATEGORY_RADIO_MEASUREMENT, "ACTION_RADIO_MEASUREMENT", &DoReserved}, ++ {RTW_WLAN_CATEGORY_FT, "ACTION_FT", &DoReserved}, ++ {RTW_WLAN_CATEGORY_HT, "ACTION_HT", &OnAction_ht}, ++#ifdef CONFIG_IEEE80211W ++ {RTW_WLAN_CATEGORY_SA_QUERY, "ACTION_SA_QUERY", &OnAction_sa_query}, ++#else ++ {RTW_WLAN_CATEGORY_SA_QUERY, "ACTION_SA_QUERY", &DoReserved}, ++#endif //CONFIG_IEEE80211W ++ //add for CONFIG_IEEE80211W ++ {RTW_WLAN_CATEGORY_UNPROTECTED_WNM, "ACTION_UNPROTECTED_WNM", &DoReserved}, ++ {RTW_WLAN_CATEGORY_SELF_PROTECTED, "ACTION_SELF_PROTECTED", &DoReserved}, ++ {RTW_WLAN_CATEGORY_WMM, "ACTION_WMM", &OnAction_wmm}, ++ {RTW_WLAN_CATEGORY_P2P, "ACTION_P2P", &OnAction_p2p}, ++}; ++ ++ ++u8 null_addr[ETH_ALEN]= {0,0,0,0,0,0}; ++ ++/************************************************** ++OUI definitions for the vendor specific IE ++***************************************************/ ++unsigned char RTW_WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01}; ++unsigned char WMM_OUI[] = {0x00, 0x50, 0xf2, 0x02}; ++unsigned char WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04}; ++unsigned char P2P_OUI[] = {0x50,0x6F,0x9A,0x09}; ++unsigned char WFD_OUI[] = {0x50,0x6F,0x9A,0x0A}; ++ ++unsigned char WMM_INFO_OUI[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01}; ++unsigned char WMM_PARA_OUI[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01}; ++ ++unsigned char WPA_TKIP_CIPHER[4] = {0x00, 0x50, 0xf2, 0x02}; ++unsigned char RSN_TKIP_CIPHER[4] = {0x00, 0x0f, 0xac, 0x02}; ++ ++extern unsigned char REALTEK_96B_IE[]; ++ ++/******************************************************** ++MCS rate definitions ++*********************************************************/ ++#ifdef CONFIG_DISABLE_MCS13TO15 ++unsigned char MCS_rate_2R_MCS13TO15_OFF[16] = {0xff, 0x1f, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; ++unsigned char MCS_rate_2R[16] = {0xff, 0xff, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; ++#else //CONFIG_DISABLE_MCS13TO15 ++unsigned char MCS_rate_2R[16] = {0xff, 0xff, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; ++#endif //CONFIG_DISABLE_MCS13TO15 ++unsigned char MCS_rate_1R[16] = {0xff, 0x00, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; ++ ++/******************************************************** ++ChannelPlan definitions ++*********************************************************/ ++/*static RT_CHANNEL_PLAN DefaultChannelPlan[RT_CHANNEL_DOMAIN_MAX] = { ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140,149,153,157,161,165},32}, // 0x00, RT_CHANNEL_DOMAIN_FCC ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},31}, // 0x01, RT_CHANNEL_DOMAIN_IC ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},32}, // 0x02, RT_CHANNEL_DOMAIN_ETSI ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x03, RT_CHANNEL_DOMAIN_SPAIN ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x04, RT_CHANNEL_DOMAIN_FRANCE ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x05, RT_CHANNEL_DOMAIN_MKK ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x06, RT_CHANNEL_DOMAIN_MKK1 ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21}, // 0x07, RT_CHANNEL_DOMAIN_ISRAEL ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22}, // 0x08, RT_CHANNEL_DOMAIN_TELEC ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14}, // 0x09, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x0A, RT_CHANNEL_DOMAIN_WORLD_WIDE_13 ++ {{1,2,3,4,5,6,7,8,9,10,11,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},26}, // 0x0B, RT_CHANNEL_DOMAIN_TAIWAN ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,149,153,157,161,165},18}, // 0x0C, RT_CHANNEL_DOMAIN_CHINA ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24}, // 0x0D, RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161,165},31}, // 0x0E, RT_CHANNEL_DOMAIN_KOREA ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64},19}, // 0x0F, RT_CHANNEL_DOMAIN_TURKEY ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},32}, // 0x10, RT_CHANNEL_DOMAIN_JAPAN ++ {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,149,153,157,161,165},20}, // 0x11, RT_CHANNEL_DOMAIN_FCC_NO_DFS ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48},17}, // 0x12, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},37}, // 0x13, RT_CHANNEL_DOMAIN_WORLD_WIDE_5G ++ {{1,2,3,4,5,6,7,8,9,10,11,56,60,64,149,153,157,161,165},19}, // 0x14, RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS ++};*/ ++ ++static RT_CHANNEL_PLAN_2G RTW_ChannelPlan2G[RT_CHANNEL_DOMAIN_2G_MAX] = { ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x00, RT_CHANNEL_DOMAIN_2G_WORLD , Passive scan CH 12, 13 ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, // 0x01, RT_CHANNEL_DOMAIN_2G_ETSI1 ++ {{1,2,3,4,5,6,7,8,9,10,11},11}, // 0x02, RT_CHANNEL_DOMAIN_2G_FCC1 ++ {{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14}, // 0x03, RT_CHANNEL_DOMAIN_2G_MIKK1 ++ {{10,11,12,13},4}, // 0x04, RT_CHANNEL_DOMAIN_2G_ETSI2 ++ {{},0}, // 0x05, RT_CHANNEL_DOMAIN_2G_NULL ++}; ++ ++static RT_CHANNEL_PLAN_5G RTW_ChannelPlan5G[RT_CHANNEL_DOMAIN_5G_MAX] = { ++ {{},0}, // 0x00, RT_CHANNEL_DOMAIN_5G_NULL ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},19}, // 0x01, RT_CHANNEL_DOMAIN_5G_ETSI1 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},24}, // 0x02, RT_CHANNEL_DOMAIN_5G_ETSI2 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,149,153,157,161,165},22}, // 0x03, RT_CHANNEL_DOMAIN_5G_ETSI3 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},24}, // 0x04, RT_CHANNEL_DOMAIN_5G_FCC1 ++ {{36,40,44,48,149,153,157,161,165},9}, // 0x05, RT_CHANNEL_DOMAIN_5G_FCC2 ++ {{36,40,44,48,52,56,60,64,149,153,157,161,165},13}, // 0x06, RT_CHANNEL_DOMAIN_5G_FCC3 ++ {{36,40,44,48,52,56,60,64,149,153,157,161},12}, // 0x07, RT_CHANNEL_DOMAIN_5G_FCC4 ++ {{149,153,157,161,165},5}, // 0x08, RT_CHANNEL_DOMAIN_5G_FCC5 ++ {{36,40,44,48,52,56,60,64},8}, // 0x09, RT_CHANNEL_DOMAIN_5G_FCC6 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},20}, // 0x0A, RT_CHANNEL_DOMAIN_5G_FCC7_IC1 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161,165},20}, // 0x0B, RT_CHANNEL_DOMAIN_5G_KCC1 ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},19}, // 0x0C, RT_CHANNEL_DOMAIN_5G_MKK1 ++ {{36,40,44,48,52,56,60,64},8}, // 0x0D, RT_CHANNEL_DOMAIN_5G_MKK2 ++ {{100,104,108,112,116,120,124,128,132,136,140},11}, // 0x0E, RT_CHANNEL_DOMAIN_5G_MKK3 ++ {{56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},15}, // 0x0F, RT_CHANNEL_DOMAIN_5G_NCC1 ++ {{56,60,64,149,153,157,161,165},8}, // 0x10, RT_CHANNEL_DOMAIN_5G_NCC2 ++ ++ //===== Driver self defined for old channel plan Compatible ,Remember to modify if have new channel plan definition ===== ++ {{36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140,149,153,157,161,165},21}, // 0x11, RT_CHANNEL_DOMAIN_5G_FCC ++ {{36,40,44,48},4}, // 0x12, RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS ++ {{36,40,44,48,149,153,157,161},8}, // 0x13, RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS ++}; ++ ++static RT_CHANNEL_PLAN_MAP RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = { ++ //===== 0x00 ~ 0x1F , Old Define ===== ++ {0x02,0x11}, //0x00, RT_CHANNEL_DOMAIN_FCC ++ {0x02,0x0A}, //0x01, RT_CHANNEL_DOMAIN_IC ++ {0x01,0x01}, //0x02, RT_CHANNEL_DOMAIN_ETSI ++ {0x01,0x00}, //0x03, RT_CHANNEL_DOMAIN_SPAIN ++ {0x01,0x00}, //0x04, RT_CHANNEL_DOMAIN_FRANCE ++ {0x03,0x00}, //0x05, RT_CHANNEL_DOMAIN_MKK ++ {0x03,0x00}, //0x06, RT_CHANNEL_DOMAIN_MKK1 ++ {0x01,0x09}, //0x07, RT_CHANNEL_DOMAIN_ISRAEL ++ {0x03,0x09}, //0x08, RT_CHANNEL_DOMAIN_TELEC ++ {0x03,0x00}, //0x09, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN ++ {0x00,0x00}, //0x0A, RT_CHANNEL_DOMAIN_WORLD_WIDE_13 ++ {0x02,0x0F}, //0x0B, RT_CHANNEL_DOMAIN_TAIWAN ++ {0x01,0x08}, //0x0C, RT_CHANNEL_DOMAIN_CHINA ++ {0x02,0x06}, //0x0D, RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO ++ {0x02,0x0B}, //0x0E, RT_CHANNEL_DOMAIN_KOREA ++ {0x02,0x09}, //0x0F, RT_CHANNEL_DOMAIN_TURKEY ++ {0x01,0x01}, //0x10, RT_CHANNEL_DOMAIN_JAPAN ++ {0x02,0x05}, //0x11, RT_CHANNEL_DOMAIN_FCC_NO_DFS ++ {0x01,0x12}, //0x12, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS ++ {0x00,0x04}, //0x13, RT_CHANNEL_DOMAIN_WORLD_WIDE_5G ++ {0x02,0x10}, //0x14, RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS ++ {0x00,0x12}, //0x15, RT_CHANNEL_DOMAIN_ETSI_NO_DFS ++ {0x00,0x13}, //0x16, RT_CHANNEL_DOMAIN_KOREA_NO_DFS ++ {0x03,0x12}, //0x17, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS ++ {0x05,0x08}, //0x18, RT_CHANNEL_DOMAIN_PAKISTAN_NO_DFS ++ {0x02,0x08}, //0x19, RT_CHANNEL_DOMAIN_TAIWAN2_NO_DFS ++ {0x00,0x00}, //0x1A, ++ {0x00,0x00}, //0x1B, ++ {0x00,0x00}, //0x1C, ++ {0x00,0x00}, //0x1D, ++ {0x00,0x00}, //0x1E, ++ {0x05,0x04}, //0x1F, RT_CHANNEL_DOMAIN_WORLD_WIDE_ONLY_5G ++ //===== 0x20 ~ 0x7F ,New Define ===== ++ {0x00,0x00}, //0x20, RT_CHANNEL_DOMAIN_WORLD_NULL ++ {0x01,0x00}, //0x21, RT_CHANNEL_DOMAIN_ETSI1_NULL ++ {0x02,0x00}, //0x22, RT_CHANNEL_DOMAIN_FCC1_NULL ++ {0x03,0x00}, //0x23, RT_CHANNEL_DOMAIN_MKK1_NULL ++ {0x04,0x00}, //0x24, RT_CHANNEL_DOMAIN_ETSI2_NULL ++ {0x02,0x04}, //0x25, RT_CHANNEL_DOMAIN_FCC1_FCC1 ++ {0x00,0x01}, //0x26, RT_CHANNEL_DOMAIN_WORLD_ETSI1 ++ {0x03,0x0C}, //0x27, RT_CHANNEL_DOMAIN_MKK1_MKK1 ++ {0x00,0x0B}, //0x28, RT_CHANNEL_DOMAIN_WORLD_KCC1 ++ {0x00,0x05}, //0x29, RT_CHANNEL_DOMAIN_WORLD_FCC2 ++ {0x00,0x00}, //0x2A, ++ {0x00,0x00}, //0x2B, ++ {0x00,0x00}, //0x2C, ++ {0x00,0x00}, //0x2D, ++ {0x00,0x00}, //0x2E, ++ {0x00,0x00}, //0x2F, ++ {0x00,0x06}, //0x30, RT_CHANNEL_DOMAIN_WORLD_FCC3 ++ {0x00,0x07}, //0x31, RT_CHANNEL_DOMAIN_WORLD_FCC4 ++ {0x00,0x08}, //0x32, RT_CHANNEL_DOMAIN_WORLD_FCC5 ++ {0x00,0x09}, //0x33, RT_CHANNEL_DOMAIN_WORLD_FCC6 ++ {0x02,0x0A}, //0x34, RT_CHANNEL_DOMAIN_FCC1_FCC7 ++ {0x00,0x02}, //0x35, RT_CHANNEL_DOMAIN_WORLD_ETSI2 ++ {0x00,0x03}, //0x36, RT_CHANNEL_DOMAIN_WORLD_ETSI3 ++ {0x03,0x0D}, //0x37, RT_CHANNEL_DOMAIN_MKK1_MKK2 ++ {0x03,0x0E}, //0x38, RT_CHANNEL_DOMAIN_MKK1_MKK3 ++ {0x02,0x0F}, //0x39, RT_CHANNEL_DOMAIN_FCC1_NCC1 ++ {0x00,0x00}, //0x3A, ++ {0x00,0x00}, //0x3B, ++ {0x00,0x00}, //0x3C, ++ {0x00,0x00}, //0x3D, ++ {0x00,0x00}, //0x3E, ++ {0x00,0x00}, //0x3F, ++ {0x02,0x10}, //0x40, RT_CHANNEL_DOMAIN_FCC1_NCC2 ++}; ++ ++static RT_CHANNEL_PLAN_MAP RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03,0x02}; //use the conbination for max channel numbers ++ ++/* ++ * Search the @param ch in given @param ch_set ++ * @ch_set: the given channel set ++ * @ch: the given channel number ++ * ++ * return the index of channel_num in channel_set, -1 if not found ++ */ ++int rtw_ch_set_search_ch(RT_CHANNEL_INFO *ch_set, const u32 ch) ++{ ++ int i; ++ for(i=0;ch_set[i].ChannelNum!=0;i++){ ++ if(ch == ch_set[i].ChannelNum) ++ break; ++ } ++ ++ if(i >= ch_set[i].ChannelNum) ++ return -1; ++ return i; ++} ++ ++/* ++ * Check the @param ch is fit with setband setting of @param adapter ++ * @adapter: the given adapter ++ * @ch: the given channel number ++ * ++ * return _TRUE when check valid, _FALSE not valid ++ */ ++bool rtw_mlme_band_check(_adapter *adapter, const u32 ch) ++{ ++ if (adapter->setband == GHZ24_50 /* 2.4G and 5G */ ++ || (adapter->setband == GHZ_24 && ch < 35) /* 2.4G only */ ++ || (adapter->setband == GHZ_50 && ch > 35) /* 5G only */ ++ ) { ++ return _TRUE; ++ } ++ return _FALSE; ++} ++ ++/**************************************************************************** ++ ++Following are the initialization functions for WiFi MLME ++ ++*****************************************************************************/ ++ ++int init_hw_mlme_ext(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ //set_opmode_cmd(padapter, infra_client_with_mlme);//removed ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++ return _SUCCESS; ++} ++ ++static void init_mlme_ext_priv_value(_adapter* padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //unsigned char default_channel_set[MAX_CHANNEL_NUM] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0}; ++ unsigned char mixed_datarate[NumRates] = {_1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_,_9M_RATE_, _12M_RATE_, _18M_RATE_, _24M_RATE_, _36M_RATE_, _48M_RATE_, _54M_RATE_, 0xff}; ++ unsigned char mixed_basicrate[NumRates] ={_1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_, _12M_RATE_, _24M_RATE_, 0xff,}; ++ ++ ATOMIC_SET(&pmlmeext->event_seq, 0); ++ pmlmeext->mgnt_seq = 0;//reset to zero when disconnect at client mode ++#ifdef CONFIG_IEEE80211W ++ pmlmeext->sa_query_seq = 0; ++ pmlmeext->mgnt_80211w_IPN=0; ++ pmlmeext->mgnt_80211w_IPN_rx=0; ++#endif //CONFIG_IEEE80211W ++ pmlmeext->cur_channel = padapter->registrypriv.channel; ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ pmlmeext->retry = 0; ++ ++ pmlmeext->cur_wireless_mode = padapter->registrypriv.wireless_mode; ++ ++ //_rtw_memcpy(pmlmeext->channel_set, DefaultChannelPlan[padapter->mlmepriv.ChannelPlan].Channel, DefaultChannelPlan[padapter->mlmepriv.ChannelPlan].Len); ++ //_rtw_memcpy(pmlmeext->channel_set, default_channel_set, MAX_CHANNEL_NUM); ++ _rtw_memcpy(pmlmeext->datarate, mixed_datarate, NumRates); ++ _rtw_memcpy(pmlmeext->basicrate, mixed_basicrate, NumRates); ++ ++ if(pmlmeext->cur_channel > 14) ++ pmlmeext->tx_rate = IEEE80211_OFDM_RATE_6MB; ++ else ++ pmlmeext->tx_rate = IEEE80211_CCK_RATE_1MB; ++ ++ pmlmeext->sitesurvey_res.state = SCAN_DISABLE; ++ pmlmeext->sitesurvey_res.channel_idx = 0; ++ pmlmeext->sitesurvey_res.bss_cnt = 0; ++ pmlmeext->scan_abort = _FALSE; ++ ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ pmlmeinfo->reauth_count = 0; ++ pmlmeinfo->reassoc_count = 0; ++ pmlmeinfo->link_count = 0; ++ pmlmeinfo->auth_seq = 0; ++ pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open; ++ pmlmeinfo->key_index = 0; ++ pmlmeinfo->iv = 0; ++ ++ pmlmeinfo->enc_algo = _NO_PRIVACY_; ++ pmlmeinfo->authModeToggle = 0; ++ ++ _rtw_memset(pmlmeinfo->chg_txt, 0, 128); ++ ++ pmlmeinfo->slotTime = SHORT_SLOT_TIME; ++ pmlmeinfo->preamble_mode = PREAMBLE_AUTO; ++ ++ pmlmeinfo->dialogToken = 0; ++ ++ pmlmeext->action_public_rxseq = 0xffff; ++ pmlmeext->action_public_dialog_token = 0xff; ++} ++ ++static int has_channel(RT_CHANNEL_INFO *channel_set, ++ u8 chanset_size, ++ u8 chan) { ++ int i; ++ ++ for (i = 0; i < chanset_size; i++) { ++ if (channel_set[i].ChannelNum == chan) { ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static void init_channel_list(_adapter *padapter, RT_CHANNEL_INFO *channel_set, ++ u8 chanset_size, ++ struct p2p_channels *channel_list) { ++ ++ struct p2p_oper_class_map op_class[] = { ++ { IEEE80211G, 81, 1, 13, 1, BW20 }, ++ { IEEE80211G, 82, 14, 14, 1, BW20 }, ++#if 0 /* Do not enable HT40 on 2 GHz */ ++ { IEEE80211G, 83, 1, 9, 1, BW40PLUS }, ++ { IEEE80211G, 84, 5, 13, 1, BW40MINUS }, ++#endif ++ { IEEE80211A, 115, 36, 48, 4, BW20 }, ++ { IEEE80211A, 116, 36, 44, 8, BW40PLUS }, ++ { IEEE80211A, 117, 40, 48, 8, BW40MINUS }, ++ { IEEE80211A, 124, 149, 161, 4, BW20 }, ++ { IEEE80211A, 125, 149, 169, 4, BW20 }, ++ { IEEE80211A, 126, 149, 157, 8, BW40PLUS }, ++ { IEEE80211A, 127, 153, 161, 8, BW40MINUS }, ++ { -1, 0, 0, 0, 0, BW20 } ++ }; ++ ++ int cla, op; ++ ++ cla = 0; ++ ++ for (op = 0; op_class[op].op_class; op++) { ++ u8 ch; ++ struct p2p_oper_class_map *o = &op_class[op]; ++ struct p2p_reg_class *reg = NULL; ++ ++ for (ch = o->min_chan; ch <= o->max_chan; ch += o->inc) { ++ if (!has_channel(channel_set, chanset_size, ch)) { ++ continue; ++ } ++ ++ if ((0 == padapter->registrypriv.ht_enable) && (8 == o->inc)) ++ continue; ++ ++ if ((0 == (padapter->registrypriv.cbw40_enable & BIT(1))) && ++ ((BW40MINUS == o->bw) || (BW40PLUS == o->bw))) ++ continue; ++ ++ if (reg == NULL) { ++ reg = &channel_list->reg_class[cla]; ++ cla++; ++ reg->reg_class = o->op_class; ++ reg->channels = 0; ++ } ++ reg->channel[reg->channels] = ch; ++ reg->channels++; ++ } ++ } ++ channel_list->reg_classes = cla; ++ ++} ++ ++static u8 init_channel_set(_adapter* padapter, u8 ChannelPlan, RT_CHANNEL_INFO *channel_set) ++{ ++ u8 index,chanset_size = 0; ++ u8 b5GBand = _FALSE, b2_4GBand = _FALSE; ++ u8 Index2G = 0, Index5G=0; ++ ++ _rtw_memset(channel_set, 0, sizeof(RT_CHANNEL_INFO)*MAX_CHANNEL_NUM); ++ ++ if(ChannelPlan >= RT_CHANNEL_DOMAIN_MAX && ChannelPlan != RT_CHANNEL_DOMAIN_REALTEK_DEFINE) ++ { ++ DBG_871X("ChannelPlan ID %x error !!!!!\n",ChannelPlan); ++ return chanset_size; ++ } ++ ++ if(padapter->registrypriv.wireless_mode & WIRELESS_11G) ++ { ++ b2_4GBand = _TRUE; ++ if(RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan) ++ Index2G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index2G; ++ else ++ Index2G = RTW_ChannelPlanMap[ChannelPlan].Index2G; ++ } ++ ++ if(padapter->registrypriv.wireless_mode & WIRELESS_11A) ++ { ++ b5GBand = _TRUE; ++ if(RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan) ++ Index5G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index5G; ++ else ++ Index5G = RTW_ChannelPlanMap[ChannelPlan].Index5G; ++ } ++ ++ if(b2_4GBand) ++ { ++ for(index=0;index= 1 && channel_set[chanset_size].ChannelNum <= 11) ++ channel_set[chanset_size].ScanType = SCAN_ACTIVE; ++ else if((channel_set[chanset_size].ChannelNum >= 12 && channel_set[chanset_size].ChannelNum <= 14)) ++ channel_set[chanset_size].ScanType = SCAN_PASSIVE; ++ } ++ else if(RT_CHANNEL_DOMAIN_WORLD_WIDE_13 == ChannelPlan || ++ RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan || ++ RT_CHANNEL_DOMAIN_2G_WORLD == Index2G)// channel 12~13, passive scan ++ { ++ if(channel_set[chanset_size].ChannelNum <= 11) ++ channel_set[chanset_size].ScanType = SCAN_ACTIVE; ++ else ++ channel_set[chanset_size].ScanType = SCAN_PASSIVE; ++ } ++ else ++ { ++ channel_set[chanset_size].ScanType = SCAN_ACTIVE; ++ } ++ ++ chanset_size++; ++ } ++ } ++ ++ if(b5GBand) ++ { ++ for(index=0;index= 149 ) ++ { ++ if(RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan)//passive scan for all 5G channels ++ channel_set[chanset_size].ScanType = SCAN_PASSIVE; ++ else ++ channel_set[chanset_size].ScanType = SCAN_ACTIVE; ++ } ++ else ++ { ++ channel_set[chanset_size].ScanType = SCAN_PASSIVE; ++ } ++ chanset_size++; ++#else /* CONFIG_DFS */ ++ if ( RTW_ChannelPlan5G[Index5G].Channel[index] <= 48 ++ || RTW_ChannelPlan5G[Index5G].Channel[index] >= 149 ) { ++ channel_set[chanset_size].ChannelNum = RTW_ChannelPlan5G[Index5G].Channel[index]; ++ if(RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan)//passive scan for all 5G channels ++ channel_set[chanset_size].ScanType = SCAN_PASSIVE; ++ else ++ channel_set[chanset_size].ScanType = SCAN_ACTIVE; ++ DBG_871X("%s(): channel_set[%d].ChannelNum = %d\n", __FUNCTION__, chanset_size, channel_set[chanset_size].ChannelNum); ++ chanset_size++; ++ } ++#endif /* CONFIG_DFS */ ++ } ++ } ++ ++ return chanset_size; ++} ++ ++int init_mlme_ext_priv(_adapter* padapter) ++{ ++ int res = _SUCCESS; ++ struct registry_priv* pregistrypriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ // We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc(). ++ //_rtw_memset((u8 *)pmlmeext, 0, sizeof(struct mlme_ext_priv)); ++ ++ pmlmeext->padapter = padapter; ++ ++ //fill_fwpriv(padapter, &(pmlmeext->fwpriv)); ++ ++ init_mlme_ext_priv_value(padapter); ++ pmlmeinfo->bAcceptAddbaReq = pregistrypriv->bAcceptAddbaReq; ++ ++ init_mlme_ext_timer(padapter); ++ ++#ifdef CONFIG_AP_MODE ++ init_mlme_ap_info(padapter); ++#endif ++ ++ pmlmeext->max_chan_nums = init_channel_set(padapter, pmlmepriv->ChannelPlan,pmlmeext->channel_set); ++ init_channel_list(padapter, pmlmeext->channel_set, pmlmeext->max_chan_nums, &pmlmeext->channel_list); ++ ++ pmlmeext->chan_scan_time = SURVEY_TO; ++ pmlmeext->mlmeext_init = _TRUE; ++ ++ ++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ pmlmeext->active_keep_alive_check = _TRUE; ++#endif ++ ++ return res; ++ ++} ++ ++void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext) ++{ ++ _adapter *padapter = pmlmeext->padapter; ++ ++ if (!padapter) ++ return; ++ ++ if (padapter->bDriverStopped == _TRUE) ++ { ++ _cancel_timer_ex(&pmlmeext->survey_timer); ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ //_cancel_timer_ex(&pmlmeext->ADDBA_timer); ++ } ++} ++ ++static u8 cmp_pkt_chnl_diff(_adapter *padapter,u8* pframe,uint packet_len) ++{ // if the channel is same, return 0. else return channel differential ++ uint len; ++ u8 channel; ++ u8 *p; ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _BEACON_IE_OFFSET_, _DSSET_IE_, &len, packet_len - _BEACON_IE_OFFSET_); ++ if (p) ++ { ++ channel = *(p + 2); ++ if(padapter->mlmeextpriv.cur_channel >= channel) ++ { ++ return (padapter->mlmeextpriv.cur_channel - channel); ++ } ++ else ++ { ++ return (channel-padapter->mlmeextpriv.cur_channel); ++ } ++ } ++ else ++ { ++ return 0; ++ } ++} ++ ++static void _mgt_dispatcher(_adapter *padapter, struct mlme_handler *ptable, union recv_frame *precv_frame) ++{ ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ ++ if(ptable->func) ++ { ++ //receive the frames that ra(a1) is my address or ra(a1) is bc address. ++ if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN) && ++ !_rtw_memcmp(GetAddr1Ptr(pframe), bc_addr, ETH_ALEN)) ++ { ++ return; ++ } ++ ++ ptable->func(padapter, precv_frame); ++ } ++ ++} ++ ++void mgt_dispatcher(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ int index; ++ struct mlme_handler *ptable; ++#ifdef CONFIG_AP_MODE ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++#endif //CONFIG_AP_MODE ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, GetAddr2Ptr(pframe)); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ++ ("+mgt_dispatcher: type(0x%x) subtype(0x%x)\n", ++ GetFrameType(pframe), GetFrameSubType(pframe))); ++ ++#if 0 ++ { ++ u8 *pbuf; ++ pbuf = GetAddr1Ptr(pframe); ++ DBG_871X("A1-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5)); ++ pbuf = GetAddr2Ptr(pframe); ++ DBG_871X("A2-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5)); ++ pbuf = GetAddr3Ptr(pframe); ++ DBG_871X("A3-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5)); ++ } ++#endif ++ ++ if (GetFrameType(pframe) != WIFI_MGT_TYPE) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("mgt_dispatcher: type(0x%x) error!\n", GetFrameType(pframe))); ++ return; ++ } ++ ++ //receive the frames that ra(a1) is my address or ra(a1) is bc address. ++ if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN) && ++ !_rtw_memcmp(GetAddr1Ptr(pframe), bc_addr, ETH_ALEN)) ++ { ++ return; ++ } ++ ++ ptable = mlme_sta_tbl; ++ ++ index = GetFrameSubType(pframe) >> 4; ++ ++#ifdef CONFIG_TDLS ++ if((index << 4)==WIFI_ACTION){ ++ //category==RTW_WLAN_CATEGORY_PUBLIC, action==TDLS_DISCOVERY_RESPONSE ++ if(*(pframe + IEEE80211_MGMT_HDR_LEN ) == RTW_WLAN_CATEGORY_PUBLIC ++ && *(pframe + IEEE80211_MGMT_HDR_LEN + 1) == TDLS_DISCOVERY_RESPONSE ) ++ { ++ DBG_871X("recv tdls discovery response frame\n"); ++ On_TDLS_Dis_Rsp(padapter, precv_frame); ++ } ++ } ++#endif //CONFIG_TDLS ++ ++ if (index > 13) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Currently we do not support reserved sub-fr-type=%d\n", index)); ++ return; ++ } ++ ptable += index; ++ ++#if 1 ++ if (psta != NULL) ++ { ++ if (GetRetry(pframe)) ++ { ++ if (precv_frame->u.hdr.attrib.seq_num == psta->RxMgmtFrameSeqNum) ++ { ++ /* drop the duplicate management frame */ ++ DBG_871X("Drop duplicate management frame with seq_num = %d.\n", precv_frame->u.hdr.attrib.seq_num); ++ return; ++ } ++ } ++ psta->RxMgmtFrameSeqNum = precv_frame->u.hdr.attrib.seq_num; ++ } ++#else ++ ++ if(GetRetry(pframe)) ++ { ++ //RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("drop due to decache!\n")); ++ //return; ++ } ++#endif ++ ++#ifdef CONFIG_AP_MODE ++ switch (GetFrameSubType(pframe)) ++ { ++ case WIFI_AUTH: ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ ptable->func = &OnAuth; ++ else ++ ptable->func = &OnAuthClient; ++ //pass through ++ case WIFI_ASSOCREQ: ++ case WIFI_REASSOCREQ: ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++#ifdef CONFIG_HOSTAPD_MLME ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ rtw_hostapd_mlme_rx(padapter, precv_frame); ++#endif ++ break; ++ case WIFI_PROBEREQ: ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++#ifdef CONFIG_HOSTAPD_MLME ++ rtw_hostapd_mlme_rx(padapter, precv_frame); ++#else ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++#endif ++ } ++ else ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++ break; ++ case WIFI_BEACON: ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++ break; ++ case WIFI_ACTION: ++ //if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++ break; ++ default: ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ rtw_hostapd_mlme_rx(padapter, precv_frame); ++ break; ++ } ++#else ++ ++ _mgt_dispatcher(padapter, ptable, precv_frame); ++ ++#endif ++ ++} ++ ++#ifdef CONFIG_P2P ++u32 p2p_listen_state_process(_adapter *padapter, unsigned char *da) ++{ ++ bool response = _TRUE; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ { ++ if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled == _FALSE ++ || padapter->mlmepriv.wps_probe_resp_ie == NULL ++ || padapter->mlmepriv.p2p_probe_resp_ie == NULL ++ ) ++ { ++ DBG_871X("DON'T issue_probersp_p2p: p2p_enabled:%d, wps_probe_resp_ie:%p, p2p_probe_resp_ie:%p\n", ++ wdev_to_priv(padapter->rtw_wdev)->p2p_enabled, ++ padapter->mlmepriv.wps_probe_resp_ie, ++ padapter->mlmepriv.p2p_probe_resp_ie); ++ response = _FALSE; ++ } ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ if( padapter->wdinfo.driver_interface == DRIVER_WEXT ) ++ { ++ // do nothing if the device name is empty ++ if ( !padapter->wdinfo.device_name_len ) ++ { ++ response = _FALSE; ++ } ++ } ++ ++ if (response == _TRUE) ++ issue_probersp_p2p( padapter, da); ++ ++ return _SUCCESS; ++} ++#endif //CONFIG_P2P ++ ++ ++/**************************************************************************** ++ ++Following are the callback functions for each subtype of the management frames ++ ++*****************************************************************************/ ++ ++unsigned int OnProbeReq(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned int ielen; ++ unsigned char *p; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur = &(pmlmeinfo->network); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint len = precv_frame->u.hdr.len; ++ u8 is_valid_p2p_probereq = _FALSE; ++ ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ u8 wifi_test_chk_rate = 1; ++ ++ if ( !rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && ++ !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE) && ++ !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && ++ !rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH) && ++ !rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) ++ ) ++ { ++ // Commented by Albert 2011/03/17 ++ // mcs_rate = 0 -> CCK 1M rate ++ // mcs_rate = 1 -> CCK 2M rate ++ // mcs_rate = 2 -> CCK 5.5M rate ++ // mcs_rate = 3 -> CCK 11M rate ++ // In the P2P mode, the driver should not support the CCK rate ++ ++ // Commented by Kurt 2012/10/16 ++ // IOT issue: Google Nexus7 use 1M rate to send p2p_probe_req after GO nego completed and Nexus7 is client ++#ifdef CONFIG_WIFI_TEST ++ if ( pattrib->mcs_rate <= 3 ) ++ { ++ wifi_test_chk_rate = 0; ++ } ++#endif //CONFIG_WIFI_TEST ++ ++ if( wifi_test_chk_rate == 1 ) ++ { ++ if((is_valid_p2p_probereq = process_probe_req_p2p_ie(pwdinfo, pframe, len)) == _TRUE) ++ { ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE)) ++ { ++ p2p_listen_state_process( padapter, get_sa(pframe)); ++ ++ return _SUCCESS; ++ } ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ goto _continue; ++ } ++ } ++ } ++ } ++ ++_continue: ++#endif //CONFIG_P2P ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE)) ++ { ++ return _SUCCESS; ++ } ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE && ++ check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE)==_FALSE) ++ { ++ return _SUCCESS; ++ } ++ ++ ++ //DBG_871X("+OnProbeReq\n"); ++ ++#ifdef CONFIG_AUTO_AP_MODE ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE && ++ pmlmepriv->cur_network.join_res == _TRUE) ++ { ++ _irqL irqL; ++ struct sta_info *psta; ++ u8 *mac_addr, *peer_addr; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 RC_OUI[4]={0x00,0xE0,0x4C,0x0A}; ++ //EID[1] + EID_LEN[1] + RC_OUI[4] + MAC[6] + PairingID[2] + ChannelNum[2] ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, (int *)&ielen, ++ len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_); ++ ++ if(!p || ielen !=14) ++ goto _non_rc_device; ++ ++ if(!_rtw_memcmp(p+2, RC_OUI, sizeof(RC_OUI))) ++ goto _non_rc_device; ++ ++ if(!_rtw_memcmp(p+6, get_sa(pframe), ETH_ALEN)) ++ { ++ DBG_871X("%s, do rc pairing ("MAC_FMT"), but mac addr mismatch!("MAC_FMT")\n", __FUNCTION__, ++ MAC_ARG(get_sa(pframe)), MAC_ARG(p+6)); ++ ++ goto _non_rc_device; ++ } ++ ++ DBG_871X("%s, got the pairing device("MAC_FMT")\n", __FUNCTION__, MAC_ARG(get_sa(pframe))); ++ ++ //new a station ++ psta = rtw_get_stainfo(pstapriv, get_sa(pframe)); ++ if (psta == NULL) ++ { ++ // allocate a new one ++ DBG_871X("going to alloc stainfo for rc="MAC_FMT"\n", MAC_ARG(get_sa(pframe))); ++ psta = rtw_alloc_stainfo(pstapriv, get_sa(pframe)); ++ if (psta == NULL) ++ { ++ //TODO: ++ DBG_871X(" Exceed the upper limit of supported clients...\n"); ++ return _SUCCESS; ++ } ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if (rtw_is_list_empty(&psta->asoc_list)) ++ { ++ psta->expire_to = pstapriv->expire_to; ++ rtw_list_insert_tail(&psta->asoc_list, &pstapriv->asoc_list); ++ pstapriv->asoc_list_cnt++; ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ //generate pairing ID ++ mac_addr = myid(&(padapter->eeprompriv)); ++ peer_addr = psta->hwaddr; ++ psta->pid = (u16)(((mac_addr[4]<<8) + mac_addr[5]) + ((peer_addr[4]<<8) + peer_addr[5])); ++ ++ //update peer stainfo ++ psta->isrc = _TRUE; ++ //psta->aid = 0; ++ //psta->mac_id = 2; ++ ++ /* get a unique AID */ ++ if (psta->aid > 0) { ++ DBG_871X("old AID %d\n", psta->aid); ++ } else { ++ for (psta->aid = 1; psta->aid <= NUM_STA; psta->aid++) ++ if (pstapriv->sta_aid[psta->aid - 1] == NULL) ++ break; ++ ++ if (psta->aid > pstapriv->max_num_sta) { ++ psta->aid = 0; ++ DBG_871X("no room for more AIDs\n"); ++ return _SUCCESS; ++ } else { ++ pstapriv->sta_aid[psta->aid - 1] = psta; ++ DBG_871X("allocate new AID = (%d)\n", psta->aid); ++ } ++ } ++ ++ psta->qos_option = 1; ++ psta->htpriv.ht_option = _TRUE; ++ psta->ieee8021x_blocked = _FALSE; ++ psta->htpriv.ampdu_enable = _FALSE; ++ psta->htpriv.sgi = _FALSE; ++ psta->htpriv.bwmode = HT_CHANNEL_WIDTH_20; ++ psta->htpriv.ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ //rtw_hal_set_odm_var(padapter, HAL_ODM_STA_INFO, psta, _TRUE); ++ ++ psta->htpriv.agg_enable_bitmap = 0x0;//reset ++ psta->htpriv.candidate_tid_bitmap = 0x0;//reset ++ ++ _rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats)); ++ ++ _enter_critical_bh(&psta->lock, &irqL); ++ psta->state |= _FW_LINKED; ++ _exit_critical_bh(&psta->lock, &irqL); ++ ++ report_add_sta_event(padapter, psta->hwaddr, psta->aid); ++ ++ } ++ ++ issue_probersp(padapter, get_sa(pframe), _FALSE); ++ ++ return _SUCCESS; ++ ++ } ++ ++_non_rc_device: ++ ++ return _SUCCESS; ++#endif //CONFIG_AUTO_AP_MODE ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY)) ++ { ++ //don't process probe req ++ return _SUCCESS; ++ } ++#endif ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SSID_IE_, (int *)&ielen, ++ len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_); ++ ++ ++ //check (wildcard) SSID ++ if (p != NULL) ++ { ++ if(is_valid_p2p_probereq == _TRUE) ++ { ++ goto _issue_probersp; ++ } ++ ++ if ( (ielen != 0 && _FALSE ==_rtw_memcmp((void *)(p+2), (void *)cur->Ssid.Ssid, cur->Ssid.SsidLength)) ++ || (ielen == 0 && pmlmeinfo->hidden_ssid_mode) ++ ) ++ { ++ return _SUCCESS; ++ } ++ ++_issue_probersp: ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE && ++ pmlmepriv->cur_network.join_res == _TRUE) ++ { ++ //DBG_871X("+issue_probersp during ap mode\n"); ++ issue_probersp(padapter, get_sa(pframe), is_valid_p2p_probereq); ++ } ++ ++ } ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnProbeRsp(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct sta_info *psta; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++#endif ++ ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) ++ { ++ if ( _TRUE == pwdinfo->tx_prov_disc_info.benable ) ++ { ++ if( _rtw_memcmp( pwdinfo->tx_prov_disc_info.peerIFAddr, GetAddr2Ptr(pframe), ETH_ALEN ) ) ++ { ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) ++ { ++ pwdinfo->tx_prov_disc_info.benable = _FALSE; ++ issue_p2p_provision_request( padapter, ++ pwdinfo->tx_prov_disc_info.ssid.Ssid, ++ pwdinfo->tx_prov_disc_info.ssid.SsidLength, ++ pwdinfo->tx_prov_disc_info.peerDevAddr ); ++ } ++ else if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) ) ++ { ++ pwdinfo->tx_prov_disc_info.benable = _FALSE; ++ issue_p2p_provision_request( padapter, ++ NULL, ++ 0, ++ pwdinfo->tx_prov_disc_info.peerDevAddr ); ++ } ++ } ++ } ++ return _SUCCESS; ++ } ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) ++ { ++ if ( _TRUE == pwdinfo->nego_req_info.benable ) ++ { ++ DBG_871X( "[%s] P2P State is GONEGO ING!\n", __FUNCTION__ ); ++ if( _rtw_memcmp( pwdinfo->nego_req_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN ) ) ++ { ++ pwdinfo->nego_req_info.benable = _FALSE; ++ issue_p2p_GO_request( padapter, pwdinfo->nego_req_info.peerDevAddr); ++ } ++ } ++ } ++ else if( rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) ) ++ { ++ if ( _TRUE == pwdinfo->invitereq_info.benable ) ++ { ++ DBG_871X( "[%s] P2P_STATE_TX_INVITE_REQ!\n", __FUNCTION__ ); ++ if( _rtw_memcmp( pwdinfo->invitereq_info.peer_macaddr, GetAddr2Ptr(pframe), ETH_ALEN ) ) ++ { ++ pwdinfo->invitereq_info.benable = _FALSE; ++ issue_p2p_invitation_request( padapter, pwdinfo->invitereq_info.peer_macaddr ); ++ } ++ } ++ } ++#endif ++ ++ ++ if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) ++ { ++ report_survey_event(padapter, precv_frame); ++#ifdef CONFIG_CONCURRENT_MODE ++ report_survey_event(padapter->pbuddy_adapter, precv_frame); ++#endif ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_report_survey_event(padapter, precv_frame); ++#endif ++ return _SUCCESS; ++ } ++ ++ #if 0 //move to validate_recv_mgnt_frame ++ if (_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN)) ++ { ++ if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) ++ { ++ if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL) ++ { ++ psta->sta_stats.rx_mgnt_pkts++; ++ } ++ } ++ } ++ #endif ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnBeacon(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ int cam_idx; ++ struct sta_info *psta; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint len = precv_frame->u.hdr.len; ++ u8 *p = NULL; ++ u32 ielen = 0; ++ ++#ifdef CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR ++ p = rtw_get_ie(pframe + sizeof(struct rtw_ieee80211_hdr_3addr) + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ielen, precv_frame->u.hdr.len -sizeof(struct rtw_ieee80211_hdr_3addr) - _BEACON_IE_OFFSET_); ++ if ((p != NULL) && (ielen > 0)) ++ { ++ if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D)) ++ { ++ /* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */ ++ DBG_871X("[WIFIDBG] Error in ESR IE is detected in Beacon of BSSID:"MAC_FMT". Fix the length of ESR IE to avoid failed Beacon parsing.\n", MAC_ARG(GetAddr3Ptr(pframe))); ++ *(p + 1) = ielen - 1; ++ } ++ } ++#endif ++ ++ if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) ++ { ++ report_survey_event(padapter, precv_frame); ++#ifdef CONFIG_CONCURRENT_MODE ++ report_survey_event(padapter->pbuddy_adapter, precv_frame); ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_report_survey_event(padapter, precv_frame); ++#endif ++ ++ return _SUCCESS; ++ } ++ ++ if (_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN)) ++ { ++ if (pmlmeinfo->state & WIFI_FW_AUTH_NULL) ++ { ++ //check the vendor of the assoc AP ++ pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pframe+sizeof(struct rtw_ieee80211_hdr_3addr), len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++#ifdef CONFIG_P2P_PS ++ // do P2P PS Before link ? , ToDo ++ //process_p2p_ps_ie(padapter, (pframe + WLAN_HDR_A3_LEN), (len - WLAN_HDR_A3_LEN)); ++#endif // CONFIG_P2P_PS ++ ++ //update TSF Value ++ update_TSF(pmlmeext, pframe, len); ++ ++ //start auth ++ start_clnt_auth(padapter); ++ ++ return _SUCCESS; ++ } ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) && (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) ++ { ++ if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL) ++ { ++ #ifdef CONFIG_PATCH_JOIN_WRONG_CHANNEL ++ //Merge from 8712 FW code ++ if (cmp_pkt_chnl_diff(padapter,pframe,len) != 0) ++ { // join wrong channel, deauth and reconnect ++ issue_deauth(padapter, (&(pmlmeinfo->network))->MacAddress, WLAN_REASON_DEAUTH_LEAVING); ++ ++ report_del_sta_event(padapter,(&(pmlmeinfo->network))->MacAddress, WLAN_REASON_JOIN_WRONG_CHANNEL); ++ pmlmeinfo->state &= (~WIFI_FW_ASSOC_SUCCESS); ++ return _SUCCESS; ++ } ++ #endif //CONFIG_PATCH_JOIN_WRONG_CHANNEL ++ ++ //update WMM, ERP in the beacon ++ //todo: the timer is used instead of the number of the beacon received ++ if ((sta_rx_pkts(psta) & 0xf) == 0) ++ { ++ //DBG_871X("update_bcn_info\n"); ++ update_beacon_info(padapter, pframe, len, psta); ++ } ++ ++#ifdef CONFIG_DFS ++ process_csa_ie(padapter, pframe, len); //channel switch announcement ++#endif //CONFIG_DFS ++ ++#ifdef CONFIG_P2P_PS ++ //if(psta->ieee8021x_blocked == _FALSE) // do not allow P2P PS during EAPOL handshake ? ++ process_p2p_ps_ie(padapter, (pframe + WLAN_HDR_A3_LEN), (len - WLAN_HDR_A3_LEN)); ++#endif //CONFIG_P2P_PS ++ ++ #if 0 //move to validate_recv_mgnt_frame ++ psta->sta_stats.rx_mgnt_pkts++; ++ #endif ++ } ++ } ++ else if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL) ++ { ++ //update WMM, ERP in the beacon ++ //todo: the timer is used instead of the number of the beacon received ++ if ((sta_rx_pkts(psta) & 0xf) == 0) ++ { ++ //DBG_871X("update_bcn_info\n"); ++ update_beacon_info(padapter, pframe, len, psta); ++ } ++ ++ #if 0 //move to validate_recv_mgnt_frame ++ psta->sta_stats.rx_mgnt_pkts++; ++ #endif ++ } ++ else ++ { ++ //allocate a new CAM entry for IBSS station ++ if ((cam_idx = allocate_fw_sta_entry(padapter)) == NUM_STA) ++ { ++ goto _END_ONBEACON_; ++ } ++ ++ //get supported rate ++ if (update_sta_support_rate(padapter, (pframe + WLAN_HDR_A3_LEN + _BEACON_IE_OFFSET_), (len - WLAN_HDR_A3_LEN - _BEACON_IE_OFFSET_), cam_idx) == _FAIL) ++ { ++ pmlmeinfo->FW_sta_info[cam_idx].status = 0; ++ goto _END_ONBEACON_; ++ } ++ ++ //update TSF Value ++ update_TSF(pmlmeext, pframe, len); ++ ++ //report sta add event ++ report_add_sta_event(padapter, GetAddr2Ptr(pframe), cam_idx); ++ } ++ } ++ } ++ ++_END_ONBEACON_: ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnAuth(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_AP_MODE ++ _irqL irqL; ++ unsigned int auth_mode, seq, ie_len; ++ unsigned char *sa, *p; ++ u16 algorithm; ++ int status; ++ static struct sta_info stat; ++ struct sta_info *pstat=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint len = precv_frame->u.hdr.len; ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY)) ++ { ++ //don't process auth request; ++ return _SUCCESS; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ return _FAIL; ++ ++ DBG_871X("+OnAuth\n"); ++ ++ sa = GetAddr2Ptr(pframe); ++ ++ auth_mode = psecuritypriv->dot11AuthAlgrthm; ++ seq = cpu_to_le16(*(u16*)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + 2)); ++ algorithm = cpu_to_le16(*(u16*)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN)); ++ ++ if (GetPrivacy(pframe)) ++ { ++#if 0 //TODO: SW rtw_wep_decrypt ++ if (SWCRYPTO) ++ { ++ status = rtw_wep_decrypt(priv, pframe, pfrinfo->pktlen, ++ priv->pmib->dot1180211AuthEntry.dot11PrivacyAlgrthm); ++ if (status == FALSE) ++ { ++ SAVE_INT_AND_CLI(flags); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"wep-decrypt a Auth frame error!\n"); ++ status = _STATS_CHALLENGE_FAIL_; ++ goto auth_fail; ++ } ++ } ++ ++ seq = cpu_to_le16(*(unsigned short *)((unsigned int)pframe + WLAN_HDR_A3_LEN + 4 + 2)); ++ algorithm = cpu_to_le16(*(unsigned short *)((unsigned int)pframe + WLAN_HDR_A3_LEN + 4)); ++#endif ++ } ++ ++ ++ DBG_871X("auth alg=%x, seq=%X\n", algorithm, seq); ++ ++ if (auth_mode == 2 && ++ psecuritypriv->dot11PrivacyAlgrthm != _WEP40_ && ++ psecuritypriv->dot11PrivacyAlgrthm != _WEP104_) ++ auth_mode = 0; ++ ++ if ((algorithm > 0 && auth_mode == 0) || // rx a shared-key auth but shared not enabled ++ (algorithm == 0 && auth_mode == 1) ) // rx a open-system auth but shared-key is enabled ++ { ++ DBG_871X("auth rejected due to bad alg [alg=%d, auth_mib=%d] %02X%02X%02X%02X%02X%02X\n", ++ algorithm, auth_mode, sa[0], sa[1], sa[2], sa[3], sa[4], sa[5]); ++ ++ status = _STATS_NO_SUPP_ALG_; ++ ++ goto auth_fail; ++ } ++ ++#if 0 //ACL control ++ phead = &priv->wlan_acl_list; ++ plist = phead->next; ++ //check sa ++ if (acl_mode == 1) // 1: positive check, only those on acl_list can be connected. ++ res = FAIL; ++ else ++ res = SUCCESS; ++ ++ while(plist != phead) ++ { ++ paclnode = list_entry(plist, struct rtw_wlan_acl_node, list); ++ plist = plist->next; ++ if (!memcmp((void *)sa, paclnode->addr, 6)) { ++ if (paclnode->mode & 2) { // deny ++ res = FAIL; ++ break; ++ } ++ else { ++ res = SUCCESS; ++ break; ++ } ++ } ++ } ++ ++ if (res != SUCCESS) { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"auth abort because ACL!\n"); ++ return FAIL; ++ } ++#else ++ if(rtw_access_ctrl(padapter, sa) == _FALSE) ++ { ++ status = _STATS_UNABLE_HANDLE_STA_; ++ goto auth_fail; ++ } ++#endif ++ ++ pstat = rtw_get_stainfo(pstapriv, sa); ++ if (pstat == NULL) ++ { ++ // allocate a new one ++ DBG_871X("going to alloc stainfo for sa="MAC_FMT"\n", MAC_ARG(sa)); ++ pstat = rtw_alloc_stainfo(pstapriv, sa); ++ if (pstat == NULL) ++ { ++ DBG_871X(" Exceed the upper limit of supported clients...\n"); ++ status = _STATS_UNABLE_HANDLE_STA_; ++ goto auth_fail; ++ } ++ ++ pstat->state = WIFI_FW_AUTH_NULL; ++ pstat->auth_seq = 0; ++ ++ //pstat->flags = 0; ++ //pstat->capability = 0; ++ } ++ else ++ { ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if(rtw_is_list_empty(&pstat->asoc_list)==_FALSE) ++ { ++ rtw_list_delete(&pstat->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ if (pstat->expire_to > 0) ++ { ++ //TODO: STA re_auth within expire_to ++ } ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ if (seq==1) { ++ //TODO: STA re_auth and auth timeout ++ } ++ } ++ ++ _enter_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ if (rtw_is_list_empty(&pstat->auth_list)) ++ { ++ rtw_list_insert_tail(&pstat->auth_list, &pstapriv->auth_list); ++ pstapriv->auth_list_cnt++; ++ } ++ _exit_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ ++ if (pstat->auth_seq == 0) ++ pstat->expire_to = pstapriv->auth_to; ++ ++ if ((pstat->auth_seq + 1) != seq) ++ { ++ DBG_871X("(1)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n", ++ seq, pstat->auth_seq+1); ++ status = _STATS_OUT_OF_AUTH_SEQ_; ++ goto auth_fail; ++ } ++ ++ if (algorithm==0 && (auth_mode == 0 || auth_mode == 2)) ++ { ++ if (seq == 1) ++ { ++ pstat->state &= ~WIFI_FW_AUTH_NULL; ++ pstat->state |= WIFI_FW_AUTH_SUCCESS; ++ pstat->expire_to = pstapriv->assoc_to; ++ pstat->authalg = algorithm; ++ } ++ else ++ { ++ DBG_871X("(2)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n", ++ seq, pstat->auth_seq+1); ++ status = _STATS_OUT_OF_AUTH_SEQ_; ++ goto auth_fail; ++ } ++ } ++ else // shared system or auto authentication ++ { ++ if (seq == 1) ++ { ++ //prepare for the challenging txt... ++ ++ //get_random_bytes((void *)pstat->chg_txt, 128);//TODO: ++ ++ pstat->state &= ~WIFI_FW_AUTH_NULL; ++ pstat->state |= WIFI_FW_AUTH_STATE; ++ pstat->authalg = algorithm; ++ pstat->auth_seq = 2; ++ } ++ else if (seq == 3) ++ { ++ //checking for challenging txt... ++ DBG_871X("checking for challenging txt...\n"); ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + 4 + _AUTH_IE_OFFSET_ , _CHLGETXT_IE_, (int *)&ie_len, ++ len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_ - 4); ++ ++ if((p==NULL) || (ie_len<=0)) ++ { ++ DBG_871X("auth rejected because challenge failure!(1)\n"); ++ status = _STATS_CHALLENGE_FAIL_; ++ goto auth_fail; ++ } ++ ++ if (_rtw_memcmp((void *)(p + 2), pstat->chg_txt, 128)) ++ { ++ pstat->state &= (~WIFI_FW_AUTH_STATE); ++ pstat->state |= WIFI_FW_AUTH_SUCCESS; ++ // challenging txt is correct... ++ pstat->expire_to = pstapriv->assoc_to; ++ } ++ else ++ { ++ DBG_871X("auth rejected because challenge failure!\n"); ++ status = _STATS_CHALLENGE_FAIL_; ++ goto auth_fail; ++ } ++ } ++ else ++ { ++ DBG_871X("(3)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n", ++ seq, pstat->auth_seq+1); ++ status = _STATS_OUT_OF_AUTH_SEQ_; ++ goto auth_fail; ++ } ++ } ++ ++ ++ // Now, we are going to issue_auth... ++ pstat->auth_seq = seq + 1; ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ issue_auth(padapter, pstat, (unsigned short)(_STATS_SUCCESSFUL_)); ++#endif ++ ++ if (pstat->state & WIFI_FW_AUTH_SUCCESS) ++ pstat->auth_seq = 0; ++ ++ ++ return _SUCCESS; ++ ++auth_fail: ++ ++ if(pstat) ++ rtw_free_stainfo(padapter , pstat); ++ ++ pstat = &stat; ++ _rtw_memset((char *)pstat, '\0', sizeof(stat)); ++ pstat->auth_seq = 2; ++ _rtw_memcpy(pstat->hwaddr, sa, 6); ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ issue_auth(padapter, pstat, (unsigned short)status); ++#endif ++ ++#endif ++ return _FAIL; ++ ++} ++ ++unsigned int OnAuthClient(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned int seq, len, status, algthm, offset; ++ unsigned char *p; ++ unsigned int go2asoc = 0; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint pkt_len = precv_frame->u.hdr.len; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ //check A1 matches or not ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN)) ++ return _SUCCESS; ++ ++ if (!(pmlmeinfo->state & WIFI_FW_AUTH_STATE)) ++ return _SUCCESS; ++ ++ offset = (GetPrivacy(pframe))? 4: 0; ++ ++ algthm = le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset)); ++ seq = le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 2)); ++ status = le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 4)); ++ ++ if (status != 0) ++ { ++ DBG_871X("clnt auth fail, status: %d\n", status); ++ if(status == 13)//&& pmlmeinfo->auth_algo == dot11AuthAlgrthm_Auto) ++ { ++ if(pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) ++ pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open; ++ else ++ pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared; ++ //pmlmeinfo->reauth_count = 0; ++ } ++ ++ set_link_timer(pmlmeext, 1); ++ goto authclnt_fail; ++ } ++ ++ if (seq == 2) ++ { ++ if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) ++ { ++ // legendary shared system ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, (int *)&len, ++ pkt_len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_); ++ ++ if (p == NULL) ++ { ++ //DBG_871X("marc: no challenge text?\n"); ++ goto authclnt_fail; ++ } ++ ++ _rtw_memcpy((void *)(pmlmeinfo->chg_txt), (void *)(p + 2), len); ++ pmlmeinfo->auth_seq = 3; ++ issue_auth(padapter, NULL, 0); ++ set_link_timer(pmlmeext, REAUTH_TO); ++ ++ return _SUCCESS; ++ } ++ else ++ { ++ // open system ++ go2asoc = 1; ++ } ++ } ++ else if (seq == 4) ++ { ++ if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared) ++ { ++ go2asoc = 1; ++ } ++ else ++ { ++ goto authclnt_fail; ++ } ++ } ++ else ++ { ++ // this is also illegal ++ //DBG_871X("marc: clnt auth failed due to illegal seq=%x\n", seq); ++ goto authclnt_fail; ++ } ++ ++ if (go2asoc) ++ { ++ start_clnt_assoc(padapter); ++ return _SUCCESS; ++ } ++ ++authclnt_fail: ++ ++ //pmlmeinfo->state &= ~(WIFI_FW_AUTH_STATE); ++ ++ return _FAIL; ++ ++} ++ ++unsigned int OnAssocReq(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_AP_MODE ++ _irqL irqL; ++ u16 capab_info, listen_interval; ++ struct rtw_ieee802_11_elems elems; ++ struct sta_info *pstat; ++ unsigned char reassoc, *p, *pos, *wpa_ie; ++ unsigned char WMM_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01}; ++ int i, ie_len, wpa_ie_len, left; ++ unsigned char supportRate[16]; ++ int supportRateNum; ++ unsigned short status = _STATS_SUCCESSFUL_; ++ unsigned short frame_type, ie_offset=0; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur = &(pmlmeinfo->network); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint pkt_len = precv_frame->u.hdr.len; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ u8 p2p_status_code = P2P_STATUS_SUCCESS; ++ u8 *p2pie; ++ u32 p2pielen = 0; ++#ifdef CONFIG_WFD ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ u32 wfd_ielen = 0; ++#endif // CONFIG_WFD ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY)) ++ { ++ //don't process assoc request; ++ return _SUCCESS; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ return _FAIL; ++ ++ frame_type = GetFrameSubType(pframe); ++ if (frame_type == WIFI_ASSOCREQ) ++ { ++ reassoc = 0; ++ ie_offset = _ASOCREQ_IE_OFFSET_; ++ } ++ else // WIFI_REASSOCREQ ++ { ++ reassoc = 1; ++ ie_offset = _REASOCREQ_IE_OFFSET_; ++ } ++ ++ ++ if (pkt_len < IEEE80211_3ADDR_LEN + ie_offset) { ++ DBG_871X("handle_assoc(reassoc=%d) - too short payload (len=%lu)" ++ "\n", reassoc, (unsigned long)pkt_len); ++ return _FAIL; ++ } ++ ++ pstat = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); ++ if (pstat == (struct sta_info *)NULL) ++ { ++ status = _RSON_CLS2_; ++ goto asoc_class2_error; ++ } ++ ++ capab_info = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN); ++ //capab_info = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN)); ++ //listen_interval = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN+2)); ++ listen_interval = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN+2); ++ ++ left = pkt_len - (IEEE80211_3ADDR_LEN + ie_offset); ++ pos = pframe + (IEEE80211_3ADDR_LEN + ie_offset); ++ ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ // check if this stat has been successfully authenticated/assocated ++ if (!((pstat->state) & WIFI_FW_AUTH_SUCCESS)) ++ { ++ if (!((pstat->state) & WIFI_FW_ASSOC_SUCCESS)) ++ { ++ status = _RSON_CLS2_; ++ goto asoc_class2_error; ++ } ++ else ++ { ++ pstat->state &= (~WIFI_FW_ASSOC_SUCCESS); ++ pstat->state |= WIFI_FW_ASSOC_STATE; ++ } ++ } ++ else ++ { ++ pstat->state &= (~WIFI_FW_AUTH_SUCCESS); ++ pstat->state |= WIFI_FW_ASSOC_STATE; ++ } ++ ++ ++#if 0// todo:tkip_countermeasures ++ if (hapd->tkip_countermeasures) { ++ resp = WLAN_REASON_MICHAEL_MIC_FAILURE; ++ goto fail; ++ } ++#endif ++ ++ pstat->capability = capab_info; ++ ++#if 0//todo: ++ //check listen_interval ++ if (listen_interval > hapd->conf->max_listen_interval) { ++ hostapd_logger(hapd, mgmt->sa, HOSTAPD_MODULE_IEEE80211, ++ HOSTAPD_LEVEL_DEBUG, ++ "Too large Listen Interval (%d)", ++ listen_interval); ++ resp = WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE; ++ goto fail; ++ } ++ ++ pstat->listen_interval = listen_interval; ++#endif ++ ++ //now parse all ieee802_11 ie to point to elems ++ if (rtw_ieee802_11_parse_elems(pos, left, &elems, 1) == ParseFailed || ++ !elems.ssid) { ++ DBG_871X("STA " MAC_FMT " sent invalid association request\n", ++ MAC_ARG(pstat->hwaddr)); ++ status = _STATS_FAILURE_; ++ goto OnAssocReqFail; ++ } ++ ++ ++ // now we should check all the fields... ++ // checking SSID ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _SSID_IE_, &ie_len, ++ pkt_len - WLAN_HDR_A3_LEN - ie_offset); ++ if (p == NULL) ++ { ++ status = _STATS_FAILURE_; ++ } ++ ++ if (ie_len == 0) // broadcast ssid, however it is not allowed in assocreq ++ status = _STATS_FAILURE_; ++ else ++ { ++ // check if ssid match ++ if (!_rtw_memcmp((void *)(p+2), cur->Ssid.Ssid, cur->Ssid.SsidLength)) ++ status = _STATS_FAILURE_; ++ ++ if (ie_len != cur->Ssid.SsidLength) ++ status = _STATS_FAILURE_; ++ } ++ ++ if(_STATS_SUCCESSFUL_ != status) ++ goto OnAssocReqFail; ++ ++ // check if the supported rate is ok ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _SUPPORTEDRATES_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset); ++ if (p == NULL) { ++ DBG_871X("Rx a sta assoc-req which supported rate is empty!\n"); ++ // use our own rate set as statoin used ++ //_rtw_memcpy(supportRate, AP_BSSRATE, AP_BSSRATE_LEN); ++ //supportRateNum = AP_BSSRATE_LEN; ++ ++ status = _STATS_FAILURE_; ++ goto OnAssocReqFail; ++ } ++ else { ++ _rtw_memcpy(supportRate, p+2, ie_len); ++ supportRateNum = ie_len; ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _EXT_SUPPORTEDRATES_IE_ , &ie_len, ++ pkt_len - WLAN_HDR_A3_LEN - ie_offset); ++ if (p != NULL) { ++ ++ if(supportRateNum<=sizeof(supportRate)) ++ { ++ _rtw_memcpy(supportRate+supportRateNum, p+2, ie_len); ++ supportRateNum += ie_len; ++ } ++ } ++ } ++ ++ //todo: mask supportRate between AP & STA -> move to update raid ++ //get_matched_rate(pmlmeext, supportRate, &supportRateNum, 0); ++ ++ //update station supportRate ++ pstat->bssratelen = supportRateNum; ++ _rtw_memcpy(pstat->bssrateset, supportRate, supportRateNum); ++ ++ ++ //check RSN/WPA/WPS ++ pstat->dot8021xalg = 0; ++ pstat->wpa_psk = 0; ++ pstat->wpa_group_cipher = 0; ++ pstat->wpa2_group_cipher = 0; ++ pstat->wpa_pairwise_cipher = 0; ++ pstat->wpa2_pairwise_cipher = 0; ++ _rtw_memset(pstat->wpa_ie, 0, sizeof(pstat->wpa_ie)); ++ if((psecuritypriv->wpa_psk & BIT(1)) && elems.rsn_ie) { ++ ++ int group_cipher=0, pairwise_cipher=0; ++ ++ wpa_ie = elems.rsn_ie; ++ wpa_ie_len = elems.rsn_ie_len; ++ ++ if(rtw_parse_wpa2_ie(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ pstat->dot8021xalg = 1;//psk, todo:802.1x ++ pstat->wpa_psk |= BIT(1); ++ ++ pstat->wpa2_group_cipher = group_cipher&psecuritypriv->wpa2_group_cipher; ++ pstat->wpa2_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa2_pairwise_cipher; ++ ++ if(!pstat->wpa2_group_cipher) ++ status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID; ++ ++ if(!pstat->wpa2_pairwise_cipher) ++ status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID; ++ } ++ else ++ { ++ status = WLAN_STATUS_INVALID_IE; ++ } ++ ++ } else if ((psecuritypriv->wpa_psk & BIT(0)) && elems.wpa_ie) { ++ ++ int group_cipher=0, pairwise_cipher=0; ++ ++ wpa_ie = elems.wpa_ie; ++ wpa_ie_len = elems.wpa_ie_len; ++ ++ if(rtw_parse_wpa_ie(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ pstat->dot8021xalg = 1;//psk, todo:802.1x ++ pstat->wpa_psk |= BIT(0); ++ ++ pstat->wpa_group_cipher = group_cipher&psecuritypriv->wpa_group_cipher; ++ pstat->wpa_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa_pairwise_cipher; ++ ++ if(!pstat->wpa_group_cipher) ++ status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID; ++ ++ if(!pstat->wpa_pairwise_cipher) ++ status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID; ++ ++ } ++ else ++ { ++ status = WLAN_STATUS_INVALID_IE; ++ } ++ ++ } else { ++ wpa_ie = NULL; ++ wpa_ie_len = 0; ++ } ++ ++ if(_STATS_SUCCESSFUL_ != status) ++ goto OnAssocReqFail; ++ ++ pstat->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS); ++ //if (hapd->conf->wps_state && wpa_ie == NULL) { //todo: to check ap if supporting WPS ++ if(wpa_ie == NULL) { ++ if (elems.wps_ie) { ++ DBG_871X("STA included WPS IE in " ++ "(Re)Association Request - assume WPS is " ++ "used\n"); ++ pstat->flags |= WLAN_STA_WPS; ++ //wpabuf_free(sta->wps_ie); ++ //sta->wps_ie = wpabuf_alloc_copy(elems.wps_ie + 4, ++ // elems.wps_ie_len - 4); ++ } else { ++ DBG_871X("STA did not include WPA/RSN IE " ++ "in (Re)Association Request - possible WPS " ++ "use\n"); ++ pstat->flags |= WLAN_STA_MAYBE_WPS; ++ } ++ ++ ++ // AP support WPA/RSN, and sta is going to do WPS, but AP is not ready ++ // that the selected registrar of AP is _FLASE ++ if((psecuritypriv->wpa_psk >0) ++ && (pstat->flags & (WLAN_STA_WPS|WLAN_STA_MAYBE_WPS))) ++ { ++ if(pmlmepriv->wps_beacon_ie) ++ { ++ u8 selected_registrar = 0; ++ ++ rtw_get_wps_attr_content(pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len, WPS_ATTR_SELECTED_REGISTRAR , &selected_registrar, NULL); ++ ++ if(!selected_registrar) ++ { ++ DBG_871X("selected_registrar is _FALSE , or AP is not ready to do WPS\n"); ++ ++ status = _STATS_UNABLE_HANDLE_STA_; ++ ++ goto OnAssocReqFail; ++ } ++ } ++ } ++ ++ } ++ else ++ { ++ int copy_len; ++ ++ if(psecuritypriv->wpa_psk == 0) ++ { ++ DBG_871X("STA " MAC_FMT ": WPA/RSN IE in association " ++ "request, but AP don't support WPA/RSN\n", MAC_ARG(pstat->hwaddr)); ++ ++ status = WLAN_STATUS_INVALID_IE; ++ ++ goto OnAssocReqFail; ++ ++ } ++ ++ if (elems.wps_ie) { ++ DBG_871X("STA included WPS IE in " ++ "(Re)Association Request - WPS is " ++ "used\n"); ++ pstat->flags |= WLAN_STA_WPS; ++ copy_len=0; ++ } ++ else ++ { ++ copy_len = ((wpa_ie_len+2) > sizeof(pstat->wpa_ie)) ? (sizeof(pstat->wpa_ie)):(wpa_ie_len+2); ++ } ++ ++ ++ if(copy_len>0) ++ _rtw_memcpy(pstat->wpa_ie, wpa_ie-2, copy_len); ++ ++ } ++ ++ ++ // check if there is WMM IE & support WWM-PS ++ pstat->flags &= ~WLAN_STA_WME; ++ pstat->qos_option = 0; ++ pstat->qos_info = 0; ++ pstat->has_legacy_ac = _TRUE; ++ pstat->uapsd_vo = 0; ++ pstat->uapsd_vi = 0; ++ pstat->uapsd_be = 0; ++ pstat->uapsd_bk = 0; ++ if (pmlmepriv->qospriv.qos_option) ++ { ++ p = pframe + WLAN_HDR_A3_LEN + ie_offset; ie_len = 0; ++ for (;;) ++ { ++ p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset); ++ if (p != NULL) { ++ if (_rtw_memcmp(p+2, WMM_IE, 6)) { ++ ++ pstat->flags |= WLAN_STA_WME; ++ ++ pstat->qos_option = 1; ++ pstat->qos_info = *(p+8); ++ ++ pstat->max_sp_len = (pstat->qos_info>>5)&0x3; ++ ++ if((pstat->qos_info&0xf) !=0xf) ++ pstat->has_legacy_ac = _TRUE; ++ else ++ pstat->has_legacy_ac = _FALSE; ++ ++ if(pstat->qos_info&0xf) ++ { ++ if(pstat->qos_info&BIT(0)) ++ pstat->uapsd_vo = BIT(0)|BIT(1); ++ else ++ pstat->uapsd_vo = 0; ++ ++ if(pstat->qos_info&BIT(1)) ++ pstat->uapsd_vi = BIT(0)|BIT(1); ++ else ++ pstat->uapsd_vi = 0; ++ ++ if(pstat->qos_info&BIT(2)) ++ pstat->uapsd_bk = BIT(0)|BIT(1); ++ else ++ pstat->uapsd_bk = 0; ++ ++ if(pstat->qos_info&BIT(3)) ++ pstat->uapsd_be = BIT(0)|BIT(1); ++ else ++ pstat->uapsd_be = 0; ++ ++ } ++ ++ break; ++ } ++ } ++ else { ++ break; ++ } ++ p = p + ie_len + 2; ++ } ++ } ++ ++ ++#ifdef CONFIG_80211N_HT ++ /* save HT capabilities in the sta object */ ++ _rtw_memset(&pstat->htpriv.ht_cap, 0, sizeof(struct rtw_ieee80211_ht_cap)); ++ if (elems.ht_capabilities && elems.ht_capabilities_len >= sizeof(struct rtw_ieee80211_ht_cap)) ++ { ++ pstat->flags |= WLAN_STA_HT; ++ ++ pstat->flags |= WLAN_STA_WME; ++ ++ _rtw_memcpy(&pstat->htpriv.ht_cap, elems.ht_capabilities, sizeof(struct rtw_ieee80211_ht_cap)); ++ ++ } else ++ pstat->flags &= ~WLAN_STA_HT; ++ ++ ++ if((pmlmepriv->htpriv.ht_option == _FALSE) && (pstat->flags&WLAN_STA_HT)) ++ { ++ status = _STATS_FAILURE_; ++ goto OnAssocReqFail; ++ } ++ ++ ++ if ((pstat->flags & WLAN_STA_HT) && ++ ((pstat->wpa2_pairwise_cipher&WPA_CIPHER_TKIP) || ++ (pstat->wpa_pairwise_cipher&WPA_CIPHER_TKIP))) ++ { ++ DBG_871X("HT: " MAC_FMT " tried to " ++ "use TKIP with HT association\n", MAC_ARG(pstat->hwaddr)); ++ ++ //status = WLAN_STATUS_CIPHER_REJECTED_PER_POLICY; ++ //goto OnAssocReqFail; ++ } ++#endif /* CONFIG_80211N_HT */ ++ ++ // ++ //if (hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G)//? ++ pstat->flags |= WLAN_STA_NONERP; ++ for (i = 0; i < pstat->bssratelen; i++) { ++ if ((pstat->bssrateset[i] & 0x7f) > 22) { ++ pstat->flags &= ~WLAN_STA_NONERP; ++ break; ++ } ++ } ++ ++ if (pstat->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) ++ pstat->flags |= WLAN_STA_SHORT_PREAMBLE; ++ else ++ pstat->flags &= ~WLAN_STA_SHORT_PREAMBLE; ++ ++ ++ ++ if (status != _STATS_SUCCESSFUL_) ++ goto OnAssocReqFail; ++ ++#ifdef CONFIG_P2P ++ pstat->is_p2p_device = _FALSE; ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ if( (p2pie=rtw_get_p2p_ie(pframe + WLAN_HDR_A3_LEN + ie_offset , pkt_len - WLAN_HDR_A3_LEN - ie_offset , NULL, &p2pielen))) ++ { ++ pstat->is_p2p_device = _TRUE; ++ if((p2p_status_code=(u8)process_assoc_req_p2p_ie(pwdinfo, pframe, pkt_len, pstat))>0) ++ { ++ pstat->p2p_status_code = p2p_status_code; ++ status = _STATS_CAP_FAIL_; ++ goto OnAssocReqFail; ++ } ++ } ++#ifdef CONFIG_WFD ++ if(rtw_get_wfd_ie(pframe + WLAN_HDR_A3_LEN + ie_offset , pkt_len - WLAN_HDR_A3_LEN - ie_offset , wfd_ie, &wfd_ielen )) ++ { ++ u8 attr_content[ 10 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ DBG_8192C( "[%s] WFD IE Found!!\n", __FUNCTION__ ); ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 ); ++ DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ } ++ } ++#endif ++ } ++ pstat->p2p_status_code = p2p_status_code; ++#endif //CONFIG_P2P ++ ++ //TODO: identify_proprietary_vendor_ie(); ++ // Realtek proprietary IE ++ // identify if this is Broadcom sta ++ // identify if this is ralink sta ++ // Customer proprietary IE ++ ++ ++ ++ /* get a unique AID */ ++ if (pstat->aid > 0) { ++ DBG_871X(" old AID %d\n", pstat->aid); ++ } else { ++ for (pstat->aid = 1; pstat->aid <= NUM_STA; pstat->aid++) ++ if (pstapriv->sta_aid[pstat->aid - 1] == NULL) ++ break; ++ ++ //if (pstat->aid > NUM_STA) { ++ if (pstat->aid > pstapriv->max_num_sta) { ++ ++ pstat->aid = 0; ++ ++ DBG_871X(" no room for more AIDs\n"); ++ ++ status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; ++ ++ goto OnAssocReqFail; ++ ++ ++ } else { ++ pstapriv->sta_aid[pstat->aid - 1] = pstat; ++ DBG_871X("allocate new AID = (%d)\n", pstat->aid); ++ } ++ } ++ ++ ++ pstat->state &= (~WIFI_FW_ASSOC_STATE); ++ pstat->state |= WIFI_FW_ASSOC_SUCCESS; ++ ++ _enter_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ if (!rtw_is_list_empty(&pstat->auth_list)) ++ { ++ rtw_list_delete(&pstat->auth_list); ++ pstapriv->auth_list_cnt--; ++ } ++ _exit_critical_bh(&pstapriv->auth_list_lock, &irqL); ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if (rtw_is_list_empty(&pstat->asoc_list)) ++ { ++ pstat->expire_to = pstapriv->expire_to; ++ rtw_list_insert_tail(&pstat->asoc_list, &pstapriv->asoc_list); ++ pstapriv->asoc_list_cnt++; ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ // now the station is qualified to join our BSS... ++ if(pstat && (pstat->state & WIFI_FW_ASSOC_SUCCESS) && (_STATS_SUCCESSFUL_==status)) ++ { ++#ifdef CONFIG_NATIVEAP_MLME ++ //.1 bss_cap_update & sta_info_update ++ bss_cap_update_on_sta_join(padapter, pstat); ++ sta_info_update(padapter, pstat); ++ ++ //issue assoc rsp before notify station join event. ++ if (frame_type == WIFI_ASSOCREQ) ++ issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP); ++ else ++ issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP); ++ ++ //.2 - report to upper layer ++ DBG_871X("indicate_sta_join_event to upper layer - hostapd\n"); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ #ifdef COMPAT_KERNEL_RELEASE ++ rtw_cfg80211_indicate_sta_assoc(padapter, pframe, pkt_len); ++ #elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ rtw_cfg80211_indicate_sta_assoc(padapter, pframe, pkt_len); ++ #else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ _enter_critical_bh(&pstat->lock, &irqL); ++ if(pstat->passoc_req) ++ { ++ rtw_mfree(pstat->passoc_req, pstat->assoc_req_len); ++ pstat->passoc_req = NULL; ++ pstat->assoc_req_len = 0; ++ } ++ ++ pstat->passoc_req = rtw_zmalloc(pkt_len); ++ if(pstat->passoc_req) ++ { ++ _rtw_memcpy(pstat->passoc_req, pframe, pkt_len); ++ pstat->assoc_req_len = pkt_len; ++ } ++ _exit_critical_bh(&pstat->lock, &irqL); ++ #endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++#else ++ rtw_indicate_sta_assoc_event(padapter, pstat); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ //.3-(1) report sta add event ++ report_add_sta_event(padapter, pstat->hwaddr, pstat->aid); ++ ++/* ++ //issue assoc rsp before notify station join event. ++ if (frame_type == WIFI_ASSOCREQ) ++ issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP); ++ else ++ issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP); ++*/ ++ ++#endif ++ } ++ ++ return _SUCCESS; ++ ++asoc_class2_error: ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ issue_deauth(padapter, (void *)GetAddr2Ptr(pframe), status); ++#endif ++ ++ return _FAIL; ++ ++OnAssocReqFail: ++ ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ pstat->aid = 0; ++ if (frame_type == WIFI_ASSOCREQ) ++ issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP); ++ else ++ issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP); ++#endif ++ ++ ++#endif /* CONFIG_AP_MODE */ ++ ++ return _FAIL; ++ ++} ++ ++unsigned int OnAssocRsp(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ uint i; ++ int res; ++ unsigned short status; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ //WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint pkt_len = precv_frame->u.hdr.len; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ //check A1 matches or not ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN)) ++ return _SUCCESS; ++ ++ if (!(pmlmeinfo->state & (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE))) ++ return _SUCCESS; ++ ++ if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) ++ return _SUCCESS; ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ //status ++ if ((status = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN + 2))) > 0) ++ { ++ DBG_871X("assoc reject, status code: %d\n", status); ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ res = -4; ++ goto report_assoc_result; ++ } ++ ++ //get capabilities ++ pmlmeinfo->capability = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN)); ++ ++ //set slot time ++ pmlmeinfo->slotTime = (pmlmeinfo->capability & BIT(10))? 9: 20; ++ ++ //AID ++ res = pmlmeinfo->aid = (int)(le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN + 4))&0x3fff); ++ ++ //following are moved to join event callback function ++ //to handle HT, WMM, rate adaptive, update MAC reg ++ //for not to handle the synchronous IO in the tasklet ++ for (i = (6 + WLAN_HDR_A3_LEN); i < pkt_len;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _VENDOR_SPECIFIC_IE_: ++ if (_rtw_memcmp(pIE->data, WMM_PARA_OUI, 6)) //WMM ++ { ++ WMM_param_handler(padapter, pIE); ++ } ++#if defined(CONFIG_P2P) && defined(CONFIG_WFD) ++ else if ( _rtw_memcmp(pIE->data, WFD_OUI, 4)) //WFD ++ { ++ DBG_871X( "[%s] Found WFD IE\n", __FUNCTION__ ); ++ WFD_info_handler( padapter, pIE ); ++ } ++#endif ++ break; ++ ++ case _HT_CAPABILITY_IE_: //HT caps ++ HT_caps_handler(padapter, pIE); ++ break; ++ ++ case _HT_EXTRA_INFO_IE_: //HT info ++ HT_info_handler(padapter, pIE); ++ break; ++ ++ case _ERPINFO_IE_: ++ ERP_IE_handler(padapter, pIE); ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ pmlmeinfo->state &= (~WIFI_FW_ASSOC_STATE); ++ pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; ++ ++ //Update Basic Rate Table for spec, 2010-12-28 , by thomas ++ UpdateBrateTbl(padapter, pmlmeinfo->network.SupportedRates); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if (!rtw_cfg80211_check_bss(padapter)) { ++ DBG_871X("rtw_cfg80211_check_bss() : BSS not found !!\n"); ++ res = -2; ++ goto report_assoc_result; ++ } ++#endif ++ ++report_assoc_result: ++ if (res > 0) { ++ rtw_buf_update(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len, pframe, pkt_len); ++ } else { ++ rtw_buf_free(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len); ++ } ++ ++ report_join_res(padapter, res); ++ return _SUCCESS; ++} ++ ++unsigned int OnDeAuth(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned short reason; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ ++ //check A3 ++ if (!(_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN))) ++ return _SUCCESS; ++ ++#ifdef CONFIG_P2P ++ if ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) ++ { ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey ); ++ _set_timer( &pwdinfo->reset_ch_sitesurvey, 10 ); ++ } ++#endif //CONFIG_P2P ++ ++ reason = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN)); ++ ++ DBG_871X("%s Reason code(%d)\n", __FUNCTION__,reason); ++ ++#ifdef CONFIG_AP_MODE ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ _irqL irqL; ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ //rtw_free_stainfo(padapter, psta); ++ //_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr2Ptr(pframe))); ++ ++ psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); ++ if(psta) ++ { ++ u8 updated; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if(rtw_is_list_empty(&psta->asoc_list)==_FALSE) ++ { ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ updated = ap_free_sta(padapter, psta, _FALSE, reason); ++ ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ associated_clients_update(padapter, updated); ++ } ++ ++ ++ return _SUCCESS; ++ } ++ else ++#endif ++ { ++ int ignore_received_deauth = 0; ++ ++ // Commented by Albert 20130604 ++ // Before sending the auth frame to start the STA/GC mode connection with AP/GO, ++ // we will send the deauth first. ++ // However, the Win8.1 with BRCM Wi-Fi will send the deauth with reason code 6 to us after receieving our deauth. ++ // Added the following code to avoid this case. ++ if ( ( pmlmeinfo->state & WIFI_FW_AUTH_STATE ) || ++ ( pmlmeinfo->state & WIFI_FW_ASSOC_STATE ) ) ++ { ++ if ( reason == WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA ) ++ { ++ ignore_received_deauth = 1; ++ } else if (WLAN_REASON_PREV_AUTH_NOT_VALID == reason) { ++ // TODO: 802.11r ++ ignore_received_deauth = 1; ++ } ++ } ++ ++ DBG_871X("%s, STA:" MAC_FMT ", ignore = %d\n", __FUNCTION__, MAC_ARG(GetAddr3Ptr(pframe)), ignore_received_deauth); ++ if ( 0 == ignore_received_deauth ) ++ { ++ receive_disconnect(padapter, GetAddr3Ptr(pframe) ,reason); ++ } ++ } ++ pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE; ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnDisassoc(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned short reason; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ ++ //check A3 ++ if (!(_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN))) ++ return _SUCCESS; ++ ++#ifdef CONFIG_P2P ++ if ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) ++ { ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey ); ++ _set_timer( &pwdinfo->reset_ch_sitesurvey, 10 ); ++ } ++#endif //CONFIG_P2P ++ ++ reason = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN)); ++ ++ DBG_871X("%s Reason code(%d)\n", __FUNCTION__,reason); ++ ++#ifdef CONFIG_AP_MODE ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ _irqL irqL; ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ //rtw_free_stainfo(padapter, psta); ++ //_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr2Ptr(pframe))); ++ ++ psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); ++ if(psta) ++ { ++ u8 updated; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if(rtw_is_list_empty(&psta->asoc_list)==_FALSE) ++ { ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ updated = ap_free_sta(padapter, psta, _FALSE, reason); ++ ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ associated_clients_update(padapter, updated); ++ } ++ ++ return _SUCCESS; ++ } ++ else ++#endif ++ { ++ DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr3Ptr(pframe))); ++ ++ receive_disconnect(padapter, GetAddr3Ptr(pframe), reason); ++ } ++ pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE; ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnAtim(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ return _SUCCESS; ++} ++ ++unsigned int on_action_spct_ch_switch(_adapter *padapter, struct sta_info *psta, u8 *ies, uint ies_len) ++{ ++ unsigned int ret = _FAIL; ++ struct mlme_ext_priv *mlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(mlmeext->mlmext_info); ++ ++ if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) { ++ ret = _SUCCESS; ++ goto exit; ++ } ++ ++ if ((pmlmeinfo->state & 0x03) == WIFI_FW_STATION_STATE) { ++ ++ int ch_switch_mode = -1, ch = -1, ch_switch_cnt = -1; ++ int ch_offset = -1; ++ u8 bwmode; ++ struct ieee80211_info_element *ie; ++ ++ DBG_871X(FUNC_NDEV_FMT" from "MAC_FMT"\n", ++ FUNC_NDEV_ARG(padapter->pnetdev), MAC_ARG(psta->hwaddr)); ++ ++ for_each_ie(ie, ies, ies_len) { ++ if (ie->id == WLAN_EID_CHANNEL_SWITCH) { ++ ch_switch_mode = ie->data[0]; ++ ch = ie->data[1]; ++ ch_switch_cnt = ie->data[2]; ++ DBG_871X("ch_switch_mode:%d, ch:%d, ch_switch_cnt:%d\n", ++ ch_switch_mode, ch, ch_switch_cnt); ++ } ++ else if (ie->id == WLAN_EID_SECONDARY_CHANNEL_OFFSET) { ++ ch_offset = secondary_ch_offset_to_hal_ch_offset(ie->data[0]); ++ DBG_871X("ch_offset:%d\n", ch_offset); ++ } ++ } ++ ++ if (ch == -1) ++ return _SUCCESS; ++ ++ if (ch_offset == -1) ++ bwmode = mlmeext->cur_bwmode; ++ else ++ bwmode = (ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) ? ++ HT_CHANNEL_WIDTH_20 : HT_CHANNEL_WIDTH_40; ++ ++ ch_offset = (ch_offset == -1) ? mlmeext->cur_ch_offset : ch_offset; ++ ++ /* todo: ++ * 1. the decision of channel switching ++ * 2. things after channel switching ++ */ ++ ++ ret = rtw_set_ch_cmd(padapter, ch, bwmode, ch_offset, _TRUE); ++ } ++ ++exit: ++ return ret; ++} ++ ++unsigned int on_action_spct(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned int ret = _FAIL; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint frame_len = precv_frame->u.hdr.len; ++ u8 *frame_body = (u8 *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ u8 category; ++ u8 action; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(padapter->pnetdev)); ++ ++ psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); ++ ++ if (!psta) ++ goto exit; ++ ++ category = frame_body[0]; ++ if(category != RTW_WLAN_CATEGORY_SPECTRUM_MGMT) ++ goto exit; ++ ++ action = frame_body[1]; ++ switch (action) { ++ case RTW_WLAN_ACTION_SPCT_MSR_REQ: ++ case RTW_WLAN_ACTION_SPCT_MSR_RPRT: ++ case RTW_WLAN_ACTION_SPCT_TPC_REQ: ++ case RTW_WLAN_ACTION_SPCT_TPC_RPRT: ++ break; ++ case RTW_WLAN_ACTION_SPCT_CHL_SWITCH: ++ #ifdef CONFIG_SPCT_CH_SWITCH ++ ret = on_action_spct_ch_switch(padapter, psta, &frame_body[2], ++ frame_len-(frame_body-pframe)-2); ++ #endif ++ break; ++ default: ++ break; ++ } ++ ++exit: ++ return ret; ++} ++ ++unsigned int OnAction_qos(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ return _SUCCESS; ++} ++ ++unsigned int OnAction_dls(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ return _SUCCESS; ++} ++ ++unsigned int OnAction_back(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ u8 *addr; ++ struct sta_info *psta=NULL; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ unsigned char *frame_body; ++ unsigned char category, action; ++ unsigned short tid, status, reason_code = 0; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //check RA matches or not ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN))//for if1, sta/ap mode ++ return _SUCCESS; ++ ++/* ++ //check A1 matches or not ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN)) ++ return _SUCCESS; ++*/ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) ++ return _SUCCESS; ++ ++ addr = GetAddr2Ptr(pframe); ++ psta = rtw_get_stainfo(pstapriv, addr); ++ ++ if(psta==NULL) ++ return _SUCCESS; ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ category = frame_body[0]; ++ if (category == RTW_WLAN_CATEGORY_BACK)// representing Block Ack ++ { ++#ifdef CONFIG_TDLS ++ if((psta->tdls_sta_state & TDLS_LINKED_STATE) && ++ (psta->htpriv.ht_option==_TRUE) && ++ (psta->htpriv.ampdu_enable==_TRUE) ) ++ { ++ //do nothing; just don't want to return _SUCCESS; ++ } ++ else ++#endif //CONFIG_TDLS ++ if (!pmlmeinfo->HT_enable) ++ { ++ return _SUCCESS; ++ } ++ ++ action = frame_body[1]; ++ DBG_871X("%s, action=%d\n", __FUNCTION__, action); ++ switch (action) ++ { ++ case RTW_WLAN_ACTION_ADDBA_REQ: //ADDBA request ++ ++ _rtw_memcpy(&(pmlmeinfo->ADDBA_req), &(frame_body[2]), sizeof(struct ADDBA_request)); ++ //process_addba_req(padapter, (u8*)&(pmlmeinfo->ADDBA_req), GetAddr3Ptr(pframe)); ++ process_addba_req(padapter, (u8*)&(pmlmeinfo->ADDBA_req), addr); ++ ++ if(pmlmeinfo->bAcceptAddbaReq == _TRUE) ++ { ++ issue_action_BA(padapter, addr, RTW_WLAN_ACTION_ADDBA_RESP, 0); ++ } ++ else ++ { ++ issue_action_BA(padapter, addr, RTW_WLAN_ACTION_ADDBA_RESP, 37);//reject ADDBA Req ++ } ++ ++ break; ++ ++ case RTW_WLAN_ACTION_ADDBA_RESP: //ADDBA response ++ ++ //status = frame_body[3] | (frame_body[4] << 8); //endian issue ++ status = RTW_GET_LE16(&frame_body[3]); ++ tid = ((frame_body[5] >> 2) & 0x7); ++ ++ if (status == 0) ++ { //successful ++ DBG_871X("agg_enable for TID=%d\n", tid); ++ psta->htpriv.agg_enable_bitmap |= 1 << tid; ++ psta->htpriv.candidate_tid_bitmap &= ~BIT(tid); ++ } ++ else ++ { ++ psta->htpriv.agg_enable_bitmap &= ~BIT(tid); ++ } ++ ++ //DBG_871X("marc: ADDBA RSP: %x\n", pmlmeinfo->agg_enable_bitmap); ++ break; ++ ++ case RTW_WLAN_ACTION_DELBA: //DELBA ++ if ((frame_body[3] & BIT(3)) == 0) ++ { ++ psta->htpriv.agg_enable_bitmap &= ~(1 << ((frame_body[3] >> 4) & 0xf)); ++ psta->htpriv.candidate_tid_bitmap &= ~(1 << ((frame_body[3] >> 4) & 0xf)); ++ ++ //reason_code = frame_body[4] | (frame_body[5] << 8); ++ reason_code = RTW_GET_LE16(&frame_body[4]); ++ } ++ else if((frame_body[3] & BIT(3)) == BIT(3)) ++ { ++ tid = (frame_body[3] >> 4) & 0x0F; ++ ++ preorder_ctrl = &psta->recvreorder_ctrl[tid]; ++ preorder_ctrl->enable = _FALSE; ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ } ++ ++ DBG_871X("%s(): DELBA: %x(%x)\n", __FUNCTION__,pmlmeinfo->agg_enable_bitmap, reason_code); ++ //todo: how to notify the host while receiving DELETE BA ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ return _SUCCESS; ++} ++ ++#ifdef CONFIG_P2P ++ ++static int get_reg_classes_full_count(struct p2p_channels channel_list) { ++ int cnt = 0; ++ int i; ++ ++ for (i = 0; i < channel_list.reg_classes; i++) { ++ cnt += channel_list.reg_class[i].channels; ++ } ++ ++ return cnt; ++} ++ ++static void get_channel_cnt_24g_5gl_5gh( struct mlme_ext_priv *pmlmeext, u8* p24g_cnt, u8* p5gl_cnt, u8* p5gh_cnt ) ++{ ++ int i = 0; ++ ++ *p24g_cnt = 0; ++ *p5gl_cnt = 0; ++ *p5gh_cnt = 0; ++ ++ for( i = 0; i < pmlmeext->max_chan_nums; i++ ) ++ { ++ if ( pmlmeext->channel_set[ i ].ChannelNum <= 14 ) ++ { ++ (*p24g_cnt)++; ++ } ++ else if ( ( pmlmeext->channel_set[ i ].ChannelNum > 14 ) && ( pmlmeext->channel_set[ i ].ChannelNum <= 48 ) ) ++ { ++ // Just include the channel 36, 40, 44, 48 channels for 5G low ++ (*p5gl_cnt)++; ++ } ++ else if ( ( pmlmeext->channel_set[ i ].ChannelNum >= 149 ) && ( pmlmeext->channel_set[ i ].ChannelNum <= 161 ) ) ++ { ++ // Just include the channel 149, 153, 157, 161 channels for 5G high ++ (*p5gh_cnt)++; ++ } ++ } ++} ++ ++void issue_p2p_GO_request(_adapter *padapter, u8* raddr) ++{ ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_GO_NEGO_REQ; ++ u8 wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 }; ++ u8 wpsielen = 0, p2pielen = 0, i; ++ u8 channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0; ++ u16 len_channellist_attr = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pwdinfo->negotiation_dialog_token = 1; // Initialize the dialog value ++ pframe = rtw_set_fixed_ie(pframe, 1, &pwdinfo->negotiation_dialog_token, &(pattrib->pktlen)); ++ ++ ++ ++ // WPS Section ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++ // Device Password ID ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ ++ if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PEER_DISPLAY_PIN ) ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_USER_SPEC ); ++ } ++ else if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_SELF_DISPLAY_PIN ) ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC ); ++ } ++ else if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PBC ) ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_PBC ); ++ } ++ ++ wpsielen += 2; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ ++ // P2P IE Section. ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20110306 ++ // According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes ++ // 1. P2P Capability ++ // 2. Group Owner Intent ++ // 3. Configuration Timeout ++ // 4. Listen Channel ++ // 5. Extended Listen Timing ++ // 6. Intended P2P Interface Address ++ // 7. Channel List ++ // 8. P2P Device Info ++ // 9. Operating Channel ++ ++ ++ // P2P Capability ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN; ++ } ++ ++ ++ // Group Owner Intent ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GO_INTENT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Todo the tie breaker bit. ++ p2pie[ p2pielen++ ] = ( ( pwdinfo->intent << 1 ) | BIT(0) ); ++ ++ // Configuration Timeout ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P GO ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P Client ++ ++ ++ // Listen Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_LISTEN_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; // Copy from SD7 ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->listen_channel; // listening channel number ++ ++ ++ // Extended Listen Timing ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Availability Period ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ // Availability Interval ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ ++ // Intended P2P Interface Address ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_INTENTED_IF_ADDR; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ ++ // Channel List ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST; ++ ++ // Length: ++ // Country String(3) ++ // + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?) ++ // + number of channels in all classes ++ len_channellist_attr = 3 ++ + (1 + 1) * (u16)(pmlmeext->channel_list.reg_classes) ++ + get_reg_classes_full_count(pmlmeext->channel_list); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 ); ++ } ++ else ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ } ++#else ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ ++#endif ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Channel Entry List ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ // Operating Class ++ if ( pbuddy_mlmeext->cur_channel > 14 ) ++ { ++ if ( pbuddy_mlmeext->cur_channel >= 149 ) ++ { ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ ++ // Number of Channels ++ // Just support 1 channel and this channel is AP's channel ++ p2pie[ p2pielen++ ] = 1; ++ ++ // Channel List ++ p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel; ++ } ++ else ++ { ++ int i,j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#else // CONFIG_CONCURRENT_MODE ++ { ++ int i,j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ // Device Info ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm ); ++ ++ p2pielen += 2; ++ ++ // Primary Device Type ++ // Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ p2pielen += 2; ++ ++ // OUI ++ *(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ p2pielen += 2; ++ ++ // Number of Secondary Device Types ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ p2pielen += 2; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name , pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ ++ // Operating Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ if ( pwdinfo->operating_channel <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // operating channel number ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_nego_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++ ++void issue_p2p_GO_response(_adapter *padapter, u8* raddr, u8* frame_body,uint len, u8 result) ++{ ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_GO_NEGO_RESP; ++ u8 wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 }; ++ u8 p2pielen = 0, i; ++ uint wpsielen = 0; ++ u16 wps_devicepassword_id = 0x0000; ++ uint wps_devicepassword_id_len = 0; ++ u8 channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh; ++ u16 len_channellist_attr = 0; ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo); ++ ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ DBG_871X( "[%s] In, result = %d\n", __FUNCTION__, result ); ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pwdinfo->negotiation_dialog_token = frame_body[7]; // The Dialog Token of provisioning discovery request frame. ++ pframe = rtw_set_fixed_ie(pframe, 1, &(pwdinfo->negotiation_dialog_token), &(pattrib->pktlen)); ++ ++ // Commented by Albert 20110328 ++ // Try to get the device password ID from the WPS IE of group negotiation request frame ++ // WiFi Direct test plan 5.1.15 ++ rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wpsie, &wpsielen); ++ rtw_get_wps_attr_content( wpsie, wpsielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len); ++ wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id ); ++ ++ _rtw_memset( wpsie, 0x00, 255 ); ++ wpsielen = 0; ++ ++ // WPS Section ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++ // Device Password ID ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ if ( wps_devicepassword_id == WPS_DPID_USER_SPEC ) ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC ); ++ } ++ else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC ) ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_USER_SPEC ); ++ } ++ else ++ { ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_PBC ); ++ } ++ wpsielen += 2; ++ ++ // Commented by Kurt 20120113 ++ // If some device wants to do p2p handshake without sending prov_disc_req ++ // We have to get peer_req_cm from here. ++ if(_rtw_memcmp( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "000", 3) ) ++ { ++ if ( wps_devicepassword_id == WPS_DPID_USER_SPEC ) ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 ); ++ } ++ else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC ) ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 ); ++ } ++ else ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 ); ++ } ++ } ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ ++ // P2P IE Section. ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20100908 ++ // According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes ++ // 1. Status ++ // 2. P2P Capability ++ // 3. Group Owner Intent ++ // 4. Configuration Timeout ++ // 5. Operating Channel ++ // 6. Intended P2P Interface Address ++ // 7. Channel List ++ // 8. Device Info ++ // 9. Group ID ( Only GO ) ++ ++ ++ // ToDo: ++ ++ // P2P Status ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_STATUS; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = result; ++ ++ // P2P Capability ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) ) ++ { ++ // Commented by Albert 2011/03/08 ++ // According to the P2P specification ++ // if the sending device will be client, the P2P Capability should be reserved of group negotation response frame ++ p2pie[ p2pielen++ ] = 0; ++ } ++ else ++ { ++ // Be group owner or meet the error case ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ } ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN; ++ } ++ ++ // Group Owner Intent ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GO_INTENT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ if ( pwdinfo->peer_intent & 0x01 ) ++ { ++ // Peer's tie breaker bit is 1, our tie breaker bit should be 0 ++ p2pie[ p2pielen++ ] = ( pwdinfo->intent << 1 ); ++ } ++ else ++ { ++ // Peer's tie breaker bit is 0, our tie breaker bit should be 1 ++ p2pie[ p2pielen++ ] = ( ( pwdinfo->intent << 1 ) | BIT(0) ); ++ } ++ ++ ++ // Configuration Timeout ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P GO ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P Client ++ ++ // Operating Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ if ( pwdinfo->operating_channel <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // operating channel number ++ ++ // Intended P2P Interface Address ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_INTENTED_IF_ADDR; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Channel List ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST; ++ ++ // Country String(3) ++ // + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?) ++ // + number of channels in all classes ++ len_channellist_attr = 3 ++ + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes ++ + get_reg_classes_full_count(pmlmeext->channel_list); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 ); ++ } ++ else ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ } ++#else ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ ++ #endif ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Channel Entry List ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ // Operating Class ++ if ( pbuddy_mlmeext->cur_channel > 14 ) ++ { ++ if ( pbuddy_mlmeext->cur_channel >= 149 ) ++ { ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ ++ // Number of Channels ++ // Just support 1 channel and this channel is AP's channel ++ p2pie[ p2pielen++ ] = 1; ++ ++ // Channel List ++ p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel; ++ } ++ else ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#else // CONFIG_CONCURRENT_MODE ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ // Device Info ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm ); ++ ++ p2pielen += 2; ++ ++ // Primary Device Type ++ // Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ p2pielen += 2; ++ ++ // OUI ++ *(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ p2pielen += 2; ++ ++ // Number of Secondary Device Types ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ p2pielen += 2; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name , pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) ) ++ { ++ // Group ID Attribute ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + pwdinfo->nego_ssidlen ); ++ p2pielen += 2; ++ ++ // Value: ++ // p2P Device Address ++ _rtw_memcpy( p2pie + p2pielen , pwdinfo->device_addr, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // SSID ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen ); ++ p2pielen += pwdinfo->nego_ssidlen; ++ ++ } ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_nego_resp_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++void issue_p2p_GO_confirm(_adapter *padapter, u8* raddr, u8 result) ++{ ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_GO_NEGO_CONF; ++ u8 wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 }; ++ u8 wpsielen = 0, p2pielen = 0; ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo); ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(pwdinfo->negotiation_dialog_token), &(pattrib->pktlen)); ++ ++ ++ ++ // P2P IE Section. ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20110306 ++ // According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes ++ // 1. Status ++ // 2. P2P Capability ++ // 3. Operating Channel ++ // 4. Channel List ++ // 5. Group ID ( if this WiFi is GO ) ++ ++ // P2P Status ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_STATUS; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = result; ++ ++ // P2P Capability ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN; ++ } ++ ++ ++ // Operating Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) ) ++ { ++ if ( pwdinfo->peer_operating_ch <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->peer_operating_ch >= 36 ) && ( pwdinfo->peer_operating_ch <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ ++ p2pie[ p2pielen++ ] = pwdinfo->peer_operating_ch; ++ } ++ else ++ { ++ if ( pwdinfo->operating_channel <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // Use the listen channel as the operating channel ++ } ++ ++ ++ // Channel List ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST; ++ ++ *(u16*) ( p2pie + p2pielen ) = 6; ++ p2pielen += 2; ++ ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Value: ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) ) ++ { ++ if ( pwdinfo->peer_operating_ch <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->peer_operating_ch >= 36 ) && ( pwdinfo->peer_operating_ch <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ p2pie[ p2pielen++ ] = 1; ++ p2pie[ p2pielen++ ] = pwdinfo->peer_operating_ch; ++ } ++ else ++ { ++ if ( pwdinfo->operating_channel <= 14 ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) ) ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ else ++ { ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = 1; ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // Use the listen channel as the operating channel ++ } ++ ++ if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) ) ++ { ++ // Group ID Attribute ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + pwdinfo->nego_ssidlen ); ++ p2pielen += 2; ++ ++ // Value: ++ // p2P Device Address ++ _rtw_memcpy( p2pie + p2pielen , pwdinfo->device_addr, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // SSID ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen ); ++ p2pielen += pwdinfo->nego_ssidlen; ++ } ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_nego_confirm_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++void issue_p2p_invitation_request(_adapter *padapter, u8* raddr ) ++{ ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_INVIT_REQ; ++ u8 p2pie[ 255 ] = { 0x00 }; ++ u8 p2pielen = 0, i; ++ u8 dialogToken = 3; ++ u8 channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0; ++ u16 len_channellist_attr = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, raddr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ // P2P IE Section. ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20101011 ++ // According to the P2P Specification, the P2P Invitation request frame should contain 7 P2P attributes ++ // 1. Configuration Timeout ++ // 2. Invitation Flags ++ // 3. Operating Channel ( Only GO ) ++ // 4. P2P Group BSSID ( Should be included if I am the GO ) ++ // 5. Channel List ++ // 6. P2P Group ID ++ // 7. P2P Device Info ++ ++ // Configuration Timeout ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P GO ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P Client ++ ++ // Invitation Flags ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_INVITATION_FLAGS; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = P2P_INVITATION_FLAGS_PERSISTENT; ++ ++ ++ // Operating Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ if ( pwdinfo->invitereq_info.operating_ch <= 14 ) ++ p2pie[ p2pielen++ ] = 0x51; ++ else if ( ( pwdinfo->invitereq_info.operating_ch >= 36 ) && ( pwdinfo->invitereq_info.operating_ch <= 48 ) ) ++ p2pie[ p2pielen++ ] = 0x73; ++ else ++ p2pie[ p2pielen++ ] = 0x7c; ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->invitereq_info.operating_ch; // operating channel number ++ ++ if ( _rtw_memcmp( myid( &padapter->eeprompriv ), pwdinfo->invitereq_info.go_bssid, ETH_ALEN ) ) ++ { ++ // P2P Group BSSID ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_BSSID; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address for GO ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ } ++ ++ // Channel List ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST; ++ ++ ++ // Length: ++ // Country String(3) ++ // + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?) ++ // + number of channels in all classes ++ len_channellist_attr = 3 ++ + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes ++ + get_reg_classes_full_count(pmlmeext->channel_list); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 ); ++ } ++ else ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ } ++#else ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ ++ #endif ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Channel Entry List ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ // Operating Class ++ if ( pbuddy_mlmeext->cur_channel > 14 ) ++ { ++ if ( pbuddy_mlmeext->cur_channel >= 149 ) ++ { ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ ++ // Number of Channels ++ // Just support 1 channel and this channel is AP's channel ++ p2pie[ p2pielen++ ] = 1; ++ ++ // Channel List ++ p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel; ++ } ++ else ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#else // CONFIG_CONCURRENT_MODE ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ ++ // P2P Group ID ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 6 + pwdinfo->invitereq_info.ssidlen ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address for GO ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // SSID ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_ssid, pwdinfo->invitereq_info.ssidlen ); ++ p2pielen += pwdinfo->invitereq_info.ssidlen; ++ ++ ++ // Device Info ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY ); ++ p2pielen += 2; ++ ++ // Primary Device Type ++ // Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ p2pielen += 2; ++ ++ // OUI ++ *(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ p2pielen += 2; ++ ++ // Number of Secondary Device Types ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ p2pielen += 2; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_invitation_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++void issue_p2p_invitation_response(_adapter *padapter, u8* raddr, u8 dialogToken, u8 status_code) ++{ ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_INVIT_RESP; ++ u8 p2pie[ 255 ] = { 0x00 }; ++ u8 p2pielen = 0, i; ++ u8 channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0; ++ u16 len_channellist_attr = 0; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, raddr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ // P2P IE Section. ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20101005 ++ // According to the P2P Specification, the P2P Invitation response frame should contain 5 P2P attributes ++ // 1. Status ++ // 2. Configuration Timeout ++ // 3. Operating Channel ( Only GO ) ++ // 4. P2P Group BSSID ( Only GO ) ++ // 5. Channel List ++ ++ // P2P Status ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_STATUS; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 ); ++ p2pielen += 2; ++ ++ // Value: ++ // When status code is P2P_STATUS_FAIL_INFO_UNAVAILABLE. ++ // Sent the event receiving the P2P Invitation Req frame to DMP UI. ++ // DMP had to compare the MAC address to find out the profile. ++ // So, the WiFi driver will send the P2P_STATUS_FAIL_INFO_UNAVAILABLE to NB. ++ // If the UI found the corresponding profile, the WiFi driver sends the P2P Invitation Req ++ // to NB to rebuild the persistent group. ++ p2pie[ p2pielen++ ] = status_code; ++ ++ // Configuration Timeout ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P GO ++ p2pie[ p2pielen++ ] = 200; // 2 seconds needed to be the P2P Client ++ ++ if( status_code == P2P_STATUS_SUCCESS ) ++ { ++ if( rtw_p2p_chk_role( pwdinfo, P2P_ROLE_GO ) ) ++ { ++ // The P2P Invitation request frame asks this Wi-Fi device to be the P2P GO ++ // In this case, the P2P Invitation response frame should carry the two more P2P attributes. ++ // First one is operating channel attribute. ++ // Second one is P2P Group BSSID attribute. ++ ++ // Operating Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; // Copy from SD7 ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // operating channel number ++ ++ ++ // P2P Group BSSID ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_BSSID; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address for GO ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ } ++ ++ // Channel List ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST; ++ ++ // Length: ++ // Country String(3) ++ // + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?) ++ // + number of channels in all classes ++ len_channellist_attr = 3 ++ + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes ++ + get_reg_classes_full_count(pmlmeext->channel_list); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 ); ++ } ++ else ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ } ++#else ++ ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr ); ++ ++#endif ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Channel Entry List ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ // Operating Class ++ if ( pbuddy_mlmeext->cur_channel > 14 ) ++ { ++ if ( pbuddy_mlmeext->cur_channel >= 149 ) ++ { ++ p2pie[ p2pielen++ ] = 0x7c; ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x73; ++ } ++ } ++ else ++ { ++ p2pie[ p2pielen++ ] = 0x51; ++ } ++ ++ // Number of Channels ++ // Just support 1 channel and this channel is AP's channel ++ p2pie[ p2pielen++ ] = 1; ++ ++ // Channel List ++ p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel; ++ } ++ else ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#else // CONFIG_CONCURRENT_MODE ++ { ++ int i, j; ++ for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) { ++ // Operating Class ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class; ++ ++ // Number of Channels ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels; ++ ++ // Channel List ++ for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) { ++ p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i]; ++ } ++ } ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ } ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_invitation_resp_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++void issue_p2p_provision_request(_adapter *padapter, u8* pssid, u8 ussidlen, u8* pdev_raddr ) ++{ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u8 dialogToken = 1; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_PROVISION_DISC_REQ; ++ u8 wpsie[ 100 ] = { 0x00 }; ++ u8 wpsielen = 0; ++ u32 p2pielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, pdev_raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pdev_raddr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ p2pielen = build_prov_disc_request_p2p_ie( pwdinfo, pframe, pssid, ussidlen, pdev_raddr ); ++ ++ pframe += p2pielen; ++ pattrib->pktlen += p2pielen; ++ ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++ // Config Method ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->tx_prov_disc_info.wps_config_method_request ); ++ wpsielen += 2; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_provdisc_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++ ++u8 is_matched_in_profilelist( u8* peermacaddr, struct profile_info* profileinfo ) ++{ ++ u8 i, match_result = 0; ++ ++ DBG_871X( "[%s] peermac = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__, ++ peermacaddr[0], peermacaddr[1],peermacaddr[2],peermacaddr[3],peermacaddr[4],peermacaddr[5]); ++ ++ for( i = 0; i < P2P_MAX_PERSISTENT_GROUP_NUM; i++, profileinfo++ ) ++ { ++ DBG_871X( "[%s] profileinfo_mac = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__, ++ profileinfo->peermac[0], profileinfo->peermac[1],profileinfo->peermac[2],profileinfo->peermac[3],profileinfo->peermac[4],profileinfo->peermac[5]); ++ if ( _rtw_memcmp( peermacaddr, profileinfo->peermac, ETH_ALEN ) ) ++ { ++ match_result = 1; ++ DBG_871X( "[%s] Match!\n", __FUNCTION__ ); ++ break; ++ } ++ } ++ ++ return (match_result ); ++} ++ ++void issue_probersp_p2p(_adapter *padapter, unsigned char *da) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned char *mac; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ //WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ u16 beacon_interval = 100; ++ u16 capInfo = 0; ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ u8 wpsie[255] = { 0x00 }; ++ u32 wpsielen = 0, p2pielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++#ifdef CONFIG_INTEL_WIDI ++ u8 zero_array_check[L2SDTA_SERVICE_VE_LEN] = { 0x00 }; ++#endif //CONFIG_INTEL_WIDI ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ mac = myid(&(padapter->eeprompriv)); ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN); ++ ++ // Use the device address for BSSID field. ++ _rtw_memcpy(pwlanhdr->addr3, mac, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(fctrl, WIFI_PROBERSP); ++ ++ pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = pattrib->hdrlen; ++ pframe += pattrib->hdrlen; ++ ++ //timestamp will be inserted by hardware ++ pframe += 8; ++ pattrib->pktlen += 8; ++ ++ // beacon interval: 2 bytes ++ _rtw_memcpy(pframe, (unsigned char *) &beacon_interval, 2); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ // capability info: 2 bytes ++ // ESS and IBSS bits must be 0 (defined in the 3.1.2.1.1 of WiFi Direct Spec) ++ capInfo |= cap_ShortPremble; ++ capInfo |= cap_ShortSlot; ++ ++ _rtw_memcpy(pframe, (unsigned char *) &capInfo, 2); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ ++ // SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, 7, pwdinfo->p2p_wildcard_ssid, &pattrib->pktlen); ++ ++ // supported rates... ++ // Use the OFDM rate in the P2P probe response frame. ( 6(B), 9(B), 12, 18, 24, 36, 48, 54 ) ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pwdinfo->support_rate, &pattrib->pktlen); ++ ++ // DS parameter set ++ pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&pwdinfo->listen_channel, &pattrib->pktlen); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if( pmlmepriv->wps_probe_resp_ie != NULL && pmlmepriv->p2p_probe_resp_ie != NULL ) ++ { ++ //WPS IE ++ _rtw_memcpy(pframe, pmlmepriv->wps_probe_resp_ie, pmlmepriv->wps_probe_resp_ie_len); ++ pattrib->pktlen += pmlmepriv->wps_probe_resp_ie_len; ++ pframe += pmlmepriv->wps_probe_resp_ie_len; ++ ++ //P2P IE ++ _rtw_memcpy(pframe, pmlmepriv->p2p_probe_resp_ie, pmlmepriv->p2p_probe_resp_ie_len); ++ pattrib->pktlen += pmlmepriv->p2p_probe_resp_ie_len; ++ pframe += pmlmepriv->p2p_probe_resp_ie_len; ++ } ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ ++ // Todo: WPS IE ++ // Noted by Albert 20100907 ++ // According to the WPS specification, all the WPS attribute is presented by Big Endian. ++ ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++#ifdef CONFIG_INTEL_WIDI ++ // Commented by Kurt ++ // Appended WiDi info. only if we did issued_probereq_widi(), and then we saved ven. ext. in pmlmepriv->sa_ext. ++ if( _rtw_memcmp(pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN) == _FALSE ++ || pmlmepriv->num_p2p_sdt != 0 ) ++ { ++ //Sec dev type ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SEC_DEV_TYPE_LIST ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 ); ++ wpsielen += 2; ++ ++ // Value: ++ // Category ID ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_DISPLAYS ); ++ wpsielen += 2; ++ ++ // OUI ++ *(u32*) ( wpsie + wpsielen ) = cpu_to_be32( INTEL_DEV_TYPE_OUI ); ++ wpsielen += 4; ++ ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_WIDI_CONSUMER_SINK ); ++ wpsielen += 2; ++ ++ if( _rtw_memcmp(pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN) == _FALSE ) ++ { ++ // Vendor Extension ++ _rtw_memcpy( wpsie + wpsielen, pmlmepriv->sa_ext, L2SDTA_SERVICE_VE_LEN ); ++ wpsielen += L2SDTA_SERVICE_VE_LEN; ++ } ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++ // WiFi Simple Config State ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SIMPLE_CONF_STATE ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_WSC_STATE_NOT_CONFIG; // Not Configured. ++ ++ // Response Type ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_RESP_TYPE ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_RESPONSE_TYPE_8021X; ++ ++ // UUID-E ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_UUID_E ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0010 ); ++ wpsielen += 2; ++ ++ // Value: ++ if (pwdinfo->external_uuid == 0) { ++ _rtw_memset( wpsie + wpsielen, 0x0, 16 ); ++ _rtw_memcpy( wpsie + wpsielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ } else { ++ _rtw_memcpy( wpsie + wpsielen, pwdinfo->uuid, 0x10 ); ++ } ++ wpsielen += 0x10; ++ ++ // Manufacturer ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MANUFACTURER ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0007 ); ++ wpsielen += 2; ++ ++ // Value: ++ _rtw_memcpy( wpsie + wpsielen, "Realtek", 7 ); ++ wpsielen += 7; ++ ++ // Model Name ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MODEL_NAME ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0006 ); ++ wpsielen += 2; ++ ++ // Value: ++ _rtw_memcpy( wpsie + wpsielen, "8192CU", 6 ); ++ wpsielen += 6; ++ ++ // Model Number ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MODEL_NUMBER ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[ wpsielen++ ] = 0x31; // character 1 ++ ++ // Serial Number ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SERIAL_NUMBER ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( ETH_ALEN ); ++ wpsielen += 2; ++ ++ // Value: ++ _rtw_memcpy( wpsie + wpsielen, "123456" , ETH_ALEN ); ++ wpsielen += ETH_ALEN; ++ ++ // Primary Device Type ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 ); ++ wpsielen += 2; ++ ++ // Value: ++ // Category ID ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_RTK_WIDI ); ++ wpsielen += 2; ++ ++ // OUI ++ *(u32*) ( wpsie + wpsielen ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_RTK_DMP ); ++ wpsielen += 2; ++ ++ // Device Name ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ wpsielen += 2; ++ ++ // Value: ++ _rtw_memcpy( wpsie + wpsielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ wpsielen += pwdinfo->device_name_len; ++ ++ // Config Method ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->supported_wps_cm ); ++ wpsielen += 2; ++ ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ ++ p2pielen = build_probe_resp_p2p_ie(pwdinfo, pframe); ++ pframe += p2pielen; ++ pattrib->pktlen += p2pielen; ++ } ++ ++#ifdef CONFIG_WFD ++#ifdef CONFIG_IOCTL_CFG80211 ++ if ( _TRUE == pwdinfo->wfd_info->wfd_enable ) ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ wfdielen = build_probe_resp_wfd_ie(pwdinfo, pframe, 0); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++#ifdef CONFIG_IOCTL_CFG80211 ++ else if (pmlmepriv->wfd_probe_resp_ie != NULL && pmlmepriv->wfd_probe_resp_ie_len>0) ++ { ++ //WFD IE ++ _rtw_memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, pmlmepriv->wfd_probe_resp_ie_len); ++ pattrib->pktlen += pmlmepriv->wfd_probe_resp_ie_len; ++ pframe += pmlmepriv->wfd_probe_resp_ie_len; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++int _issue_probereq_p2p(_adapter *padapter, u8 *da, int wait_ack) ++{ ++ int ret = _FAIL; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned char *mac; ++ unsigned char bssrate[NumRates]; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ int bssrate_len = 0; ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ u8 wpsie[255] = { 0x00 }, p2pie[ 255 ] = { 0x00 }; ++ u16 wpsielen = 0, p2pielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ mac = myid(&(padapter->eeprompriv)); ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ if (da) { ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, da, ETH_ALEN); ++ } else { ++ if ( ( pwdinfo->p2p_info.scan_op_ch_only ) || ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) ) ++ { ++ // This two flags will be set when this is only the P2P client mode. ++ _rtw_memcpy(pwlanhdr->addr1, pwdinfo->p2p_peer_interface_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pwdinfo->p2p_peer_interface_addr, ETH_ALEN); ++ } ++ else ++ { ++ // broadcast probe request frame ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, bc_addr, ETH_ALEN); ++ } ++ } ++ _rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_PROBEREQ); ++ ++ pframe += sizeof (struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) ++ { ++ pframe = rtw_set_ie(pframe, _SSID_IE_, pwdinfo->tx_prov_disc_info.ssid.SsidLength, pwdinfo->tx_prov_disc_info.ssid.Ssid, &(pattrib->pktlen)); ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SSID_IE_, P2P_WILDCARD_SSID_LEN, pwdinfo->p2p_wildcard_ssid, &(pattrib->pktlen)); ++ } ++ // Use the OFDM rate in the P2P probe request frame. ( 6(B), 9(B), 12(B), 24(B), 36, 48, 54 ) ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pwdinfo->support_rate, &pattrib->pktlen); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if( pmlmepriv->wps_probe_req_ie != NULL && pmlmepriv->p2p_probe_req_ie != NULL ) ++ { ++ //WPS IE ++ _rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len); ++ pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; ++ pframe += pmlmepriv->wps_probe_req_ie_len; ++ ++ //P2P IE ++ _rtw_memcpy(pframe, pmlmepriv->p2p_probe_req_ie, pmlmepriv->p2p_probe_req_ie_len); ++ pattrib->pktlen += pmlmepriv->p2p_probe_req_ie_len; ++ pframe += pmlmepriv->p2p_probe_req_ie_len; ++ } ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ ++ // WPS IE ++ // Noted by Albert 20110221 ++ // According to the WPS specification, all the WPS attribute is presented by Big Endian. ++ ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++ if( pmlmepriv->wps_probe_req_ie == NULL ) ++ { ++ // UUID-E ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_UUID_E ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0010 ); ++ wpsielen += 2; ++ ++ // Value: ++ if (pwdinfo->external_uuid == 0) { ++ _rtw_memset( wpsie + wpsielen, 0x0, 16 ); ++ _rtw_memcpy( wpsie + wpsielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ } else { ++ _rtw_memcpy( wpsie + wpsielen, pwdinfo->uuid, 0x10 ); ++ } ++ wpsielen += 0x10; ++ ++ // Config Method ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->supported_wps_cm ); ++ wpsielen += 2; ++ } ++ ++ // Device Name ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ wpsielen += 2; ++ ++ // Value: ++ _rtw_memcpy( wpsie + wpsielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ wpsielen += pwdinfo->device_name_len; ++ ++ // Primary Device Type ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 ); ++ wpsielen += 2; ++ ++ // Value: ++ // Category ID ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ wpsielen += 2; ++ ++ // OUI ++ *(u32*) ( wpsie + wpsielen ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ wpsielen += 2; ++ ++ // Device Password ID ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC ); // Registrar-specified ++ wpsielen += 2; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20110221 ++ // According to the P2P Specification, the probe request frame should contain 5 P2P attributes ++ // 1. P2P Capability ++ // 2. P2P Device ID if this probe request wants to find the specific P2P device ++ // 3. Listen Channel ++ // 4. Extended Listen Timing ++ // 5. Operating Channel if this WiFi is working as the group owner now ++ ++ // P2P Capability ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT; ++ else ++ p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT; ++ ++ // Listen Channel ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_LISTEN_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; // Copy from SD7 ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->listen_channel; // listen channel ++ ++ ++ // Extended Listen Timing ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Availability Period ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ // Availability Interval ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) ) ++ { ++ // Operating Channel (if this WiFi is working as the group owner now) ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Country String ++ p2pie[ p2pielen++ ] = 'X'; ++ p2pie[ p2pielen++ ] = 'X'; ++ ++ // The third byte should be set to 0x04. ++ // Described in the "Operating Channel Attribute" section. ++ p2pie[ p2pielen++ ] = 0x04; ++ ++ // Operating Class ++ p2pie[ p2pielen++ ] = 0x51; // Copy from SD7 ++ ++ // Channel Number ++ p2pie[ p2pielen++ ] = pwdinfo->operating_channel; // operating channel number ++ ++ } ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++ if( pmlmepriv->wps_probe_req_ie != NULL ) ++ { ++ //WPS IE ++ _rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len); ++ pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; ++ pframe += pmlmepriv->wps_probe_req_ie_len; ++ } ++ } ++ ++#ifdef CONFIG_WFD ++#ifdef CONFIG_IOCTL_CFG80211 ++ if ( _TRUE == pwdinfo->wfd_info->wfd_enable ) ++#endif ++ { ++ wfdielen = build_probe_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++#ifdef CONFIG_IOCTL_CFG80211 ++ else if (pmlmepriv->wfd_probe_req_ie != NULL && pmlmepriv->wfd_probe_req_ie_len>0) ++ { ++ //WFD IE ++ _rtw_memcpy(pframe, pmlmepriv->wfd_probe_req_ie, pmlmepriv->wfd_probe_req_ie_len); ++ pattrib->pktlen += pmlmepriv->wfd_probe_req_ie_len; ++ pframe += pmlmepriv->wfd_probe_req_ie_len; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("issuing probe_req, tx_len=%d\n", pattrib->last_txcmdsz)); ++ ++ if (wait_ack) { ++ ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe); ++ } else { ++ dump_mgntframe(padapter, pmgntframe); ++ ret = _SUCCESS; ++ } ++ ++exit: ++ return ret; ++} ++ ++inline void issue_probereq_p2p(_adapter *adapter, u8 *da) ++{ ++ _issue_probereq_p2p(adapter, da, _FALSE); ++} ++ ++int issue_probereq_p2p_ex(_adapter *adapter, u8 *da, int try_cnt, int wait_ms) ++{ ++ int ret; ++ int i = 0; ++ u32 start = rtw_get_current_time(); ++ ++ do ++ { ++ ret = _issue_probereq_p2p(adapter, da, wait_ms>0?_TRUE:_FALSE); ++ ++ i++; ++ ++ if (adapter->bDriverStopped || adapter->bSurpriseRemoved) ++ break; ++ ++ if(i < try_cnt && wait_ms > 0 && ret==_FAIL) ++ rtw_msleep_os(wait_ms); ++ ++ }while((iu.hdr.adapter; ++ struct mlme_ext_priv *mlmeext = &(adapter->mlmeextpriv); ++ u8 *frame = recv_frame->u.hdr.rx_data; ++ u16 seq_ctrl = ( (recv_frame->u.hdr.attrib.seq_num&0xffff) << 4) | ++ (recv_frame->u.hdr.attrib.frag_num & 0xf); ++ ++ if (GetRetry(frame)) { ++ if (token >= 0) { ++ if ((seq_ctrl == mlmeext->action_public_rxseq) ++ && (token == mlmeext->action_public_dialog_token)) ++ { ++ DBG_871X(FUNC_ADPT_FMT" seq_ctrl=0x%x, rxseq=0x%x, token:%d\n", ++ FUNC_ADPT_ARG(adapter), seq_ctrl, mlmeext->action_public_rxseq, token); ++ return _FAIL; ++ } ++ } else { ++ if (seq_ctrl == mlmeext->action_public_rxseq) { ++ DBG_871X(FUNC_ADPT_FMT" seq_ctrl=0x%x, rxseq=0x%x\n", ++ FUNC_ADPT_ARG(adapter), seq_ctrl, mlmeext->action_public_rxseq); ++ return _FAIL; ++ } ++ } ++ } ++ ++ mlmeext->action_public_rxseq = seq_ctrl; ++ ++ if (token >= 0) ++ mlmeext->action_public_dialog_token = token; ++ ++ return _SUCCESS; ++} ++ ++unsigned int on_action_public_p2p(union recv_frame *precv_frame) ++{ ++ _adapter *padapter = precv_frame->u.hdr.adapter; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint len = precv_frame->u.hdr.len; ++ u8 *frame_body; ++ u8 dialogToken=0; ++#ifdef CONFIG_P2P ++ u8 *p2p_ie; ++ u32 p2p_ielen, wps_ielen; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ u8 result = P2P_STATUS_SUCCESS; ++ u8 empty_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; ++ u8 *merged_p2pie = NULL; ++ u32 merged_p2p_ielen = 0; ++#endif //CONFIG_P2P ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ dialogToken = frame_body[7]; ++ ++ if (rtw_action_public_decache(precv_frame, dialogToken) == _FAIL) ++ return _FAIL; ++ ++#ifdef CONFIG_P2P ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey ); ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211) ++ { ++ rtw_cfg80211_rx_p2p_action_public(padapter, pframe, len); ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ // Do nothing if the driver doesn't enable the P2P function. ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ return _SUCCESS; ++ ++ len -= sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ switch( frame_body[ 6 ] )//OUI Subtype ++ { ++ case P2P_GO_NEGO_REQ: ++ { ++ DBG_871X( "[%s] Got GO Nego Req Frame\n", __FUNCTION__); ++ _rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) ); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ)) ++ { ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ } ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL)) ++ { ++ // Commented by Albert 20110526 ++ // In this case, this means the previous nego fail doesn't be reset yet. ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ // Restore the previous p2p state ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ DBG_871X( "[%s] Restore the previous p2p state to %d\n", __FUNCTION__, rtw_p2p_state(pwdinfo) ); ++ } ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer ); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ // Commented by Kurt 20110902 ++ //Add if statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered. ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ ++ // Commented by Kurt 20120113 ++ // Get peer_dev_addr here if peer doesn't issue prov_disc frame. ++ if( _rtw_memcmp(pwdinfo->rx_prov_disc_info.peerDevAddr, empty_addr, ETH_ALEN) ); ++ _rtw_memcpy(pwdinfo->rx_prov_disc_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN); ++ ++ result = process_p2p_group_negotation_req( pwdinfo, frame_body, len ); ++ issue_p2p_GO_response( padapter, GetAddr2Ptr(pframe), frame_body, len, result ); ++#ifdef CONFIG_INTEL_WIDI ++ if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) ) ++ { ++ padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION; ++ _cancel_timer_ex(&(padapter->mlmepriv.listen_timer)); ++ intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL); ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++ // Commented by Albert 20110718 ++ // No matter negotiating or negotiation failure, the driver should set up the restore P2P state timer. ++#ifdef CONFIG_CONCURRENT_MODE ++ // Commented by Albert 20120107 ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 3000 ); ++#else // CONFIG_CONCURRENT_MODE ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 5000 ); ++#endif // CONFIG_CONCURRENT_MODE ++ break; ++ } ++ case P2P_GO_NEGO_RESP: ++ { ++ DBG_871X( "[%s] Got GO Nego Resp Frame\n", __FUNCTION__); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) ++ { ++ // Commented by Albert 20110425 ++ // The restore timer is enabled when issuing the nego request frame of rtw_p2p_connect function. ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ pwdinfo->nego_req_info.benable = _FALSE; ++ result = process_p2p_group_negotation_resp( pwdinfo, frame_body, len); ++ issue_p2p_GO_confirm( pwdinfo->padapter, GetAddr2Ptr(pframe), result); ++ if ( P2P_STATUS_SUCCESS == result ) ++ { ++ if ( rtw_p2p_role(pwdinfo) == P2P_ROLE_CLIENT ) ++ { ++ pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch; ++ #ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.operation_ch[ 1 ] = 1; //Check whether GO is operating in channel 1; ++ pwdinfo->p2p_info.operation_ch[ 2 ] = 6; //Check whether GO is operating in channel 6; ++ pwdinfo->p2p_info.operation_ch[ 3 ] = 11; //Check whether GO is operating in channel 11; ++ #endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.scan_op_ch_only = 1; ++ _set_timer( &pwdinfo->reset_ch_sitesurvey2, P2P_RESET_SCAN_CH ); ++ } ++ } ++ ++ // Reset the dialog token for group negotiation frames. ++ pwdinfo->negotiation_dialog_token = 1; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL)) ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 5000 ); ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] Skipped GO Nego Resp Frame (p2p_state != P2P_STATE_GONEGO_ING)\n", __FUNCTION__); ++ } ++ ++ break; ++ } ++ case P2P_GO_NEGO_CONF: ++ { ++ DBG_871X( "[%s] Got GO Nego Confirm Frame\n", __FUNCTION__); ++ result = process_p2p_group_negotation_confirm( pwdinfo, frame_body, len); ++ if ( P2P_STATUS_SUCCESS == result ) ++ { ++ if ( rtw_p2p_role(pwdinfo) == P2P_ROLE_CLIENT ) ++ { ++ pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch; ++ #ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.operation_ch[ 1 ] = 1; //Check whether GO is operating in channel 1; ++ pwdinfo->p2p_info.operation_ch[ 2 ] = 6; //Check whether GO is operating in channel 6; ++ pwdinfo->p2p_info.operation_ch[ 3 ] = 11; //Check whether GO is operating in channel 11; ++ #endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.scan_op_ch_only = 1; ++ _set_timer( &pwdinfo->reset_ch_sitesurvey2, P2P_RESET_SCAN_CH ); ++ } ++ } ++ break; ++ } ++ case P2P_INVIT_REQ: ++ { ++ // Added by Albert 2010/10/05 ++ // Received the P2P Invite Request frame. ++ ++ DBG_871X( "[%s] Got invite request frame!\n", __FUNCTION__ ); ++ if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) ) ++ { ++ // Parse the necessary information from the P2P Invitation Request frame. ++ // For example: The MAC address of sending this P2P Invitation Request frame. ++ u32 attr_contentlen = 0; ++ u8 status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ struct group_id_info group_id; ++ u8 invitation_flag = 0; ++ ++ merged_p2p_ielen = rtw_get_p2p_merged_ies_len(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_); ++ ++ merged_p2pie = rtw_malloc(merged_p2p_ielen); ++ if (merged_p2pie == NULL) ++ { ++ DBG_871X( "[%s] Malloc p2p ie fail\n", __FUNCTION__); ++ goto exit; ++ } ++ _rtw_memset(merged_p2pie, 0x00, merged_p2p_ielen); ++ ++ merged_p2p_ielen = rtw_p2p_merge_ies(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, merged_p2pie); ++ ++ rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_INVITATION_FLAGS, &invitation_flag, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ ++ rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_BSSID, pwdinfo->p2p_peer_interface_addr, &attr_contentlen); ++ // Commented by Albert 20120510 ++ // Copy to the pwdinfo->p2p_peer_interface_addr. ++ // So that the WFD UI ( or Sigma ) can get the peer interface address by using the following command. ++ // #> iwpriv wlan0 p2p_get peer_ifa ++ // After having the peer interface address, the sigma can find the correct conf file for wpa_supplicant. ++ ++ if ( attr_contentlen ) ++ { ++ DBG_871X( "[%s] GO's BSSID = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__, ++ pwdinfo->p2p_peer_interface_addr[0], pwdinfo->p2p_peer_interface_addr[1], ++ pwdinfo->p2p_peer_interface_addr[2], pwdinfo->p2p_peer_interface_addr[3], ++ pwdinfo->p2p_peer_interface_addr[4], pwdinfo->p2p_peer_interface_addr[5] ); ++ } ++ ++ if ( invitation_flag & P2P_INVITATION_FLAGS_PERSISTENT ) ++ { ++ // Re-invoke the persistent group. ++ ++ _rtw_memset( &group_id, 0x00, sizeof( struct group_id_info ) ); ++ rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_ID, ( u8* ) &group_id, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ if ( _rtw_memcmp( group_id.go_device_addr, myid( &padapter->eeprompriv ), ETH_ALEN ) ) ++ { ++ // The p2p device sending this p2p invitation request wants this Wi-Fi device to be the persistent GO. ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_GO ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_GO ); ++ status_code = P2P_STATUS_SUCCESS; ++ } ++ else ++ { ++ // The p2p device sending this p2p invitation request wants to be the persistent GO. ++ if ( is_matched_in_profilelist( pwdinfo->p2p_peer_interface_addr, &pwdinfo->profileinfo[ 0 ] ) ) ++ { ++ u8 operatingch_info[5] = { 0x00 }; ++ ++ if ( rtw_get_p2p_attr_content(merged_p2pie, merged_p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) ) ++ { ++ if( rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, (u32)operatingch_info[4] ) >= 0 ) ++ { ++ // The operating channel is acceptable for this device. ++ pwdinfo->rx_invitereq_info.operation_ch[0]= operatingch_info[4]; ++ #ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.operation_ch[1]= 1; //Check whether GO is operating in channel 1; ++ pwdinfo->rx_invitereq_info.operation_ch[2]= 6; //Check whether GO is operating in channel 6; ++ pwdinfo->rx_invitereq_info.operation_ch[3]= 11; //Check whether GO is operating in channel 11; ++ #endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.scan_op_ch_only = 1; ++ _set_timer( &pwdinfo->reset_ch_sitesurvey, P2P_RESET_SCAN_CH ); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT ); ++ status_code = P2P_STATUS_SUCCESS; ++ } ++ else ++ { ++ // The operating channel isn't supported by this device. ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_DEVICE ); ++ status_code = P2P_STATUS_FAIL_NO_COMMON_CH; ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 3000 ); ++ } ++ } ++ else ++ { ++ // Commented by Albert 20121130 ++ // Intel will use the different P2P IE to store the operating channel information ++ // Workaround for Intel WiDi 3.5 ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT ); ++ status_code = P2P_STATUS_SUCCESS; ++ } ++ } ++ else ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH ); ++ #ifdef CONFIG_INTEL_WIDI ++ _rtw_memcpy( pwdinfo->p2p_peer_device_addr, group_id.go_device_addr , ETH_ALEN ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT ); ++ #endif //CONFIG_INTEL_WIDI ++ ++ status_code = P2P_STATUS_FAIL_UNKNOWN_P2PGROUP; ++ } ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] P2P Group ID Attribute NOT FOUND!\n", __FUNCTION__ ); ++ status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ } ++ } ++ else ++ { ++ // Received the invitation to join a P2P group. ++ ++ _rtw_memset( &group_id, 0x00, sizeof( struct group_id_info ) ); ++ rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_ID, ( u8* ) &group_id, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ if ( _rtw_memcmp( group_id.go_device_addr, myid( &padapter->eeprompriv ), ETH_ALEN ) ) ++ { ++ // In this case, the GO can't be myself. ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH ); ++ status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ } ++ else ++ { ++ // The p2p device sending this p2p invitation request wants to join an existing P2P group ++ // Commented by Albert 2012/06/28 ++ // In this case, this Wi-Fi device should use the iwpriv command to get the peer device address. ++ // The peer device address should be the destination address for the provisioning discovery request. ++ // Then, this Wi-Fi device should use the iwpriv command to get the peer interface address. ++ // The peer interface address should be the address for WPS mac address ++ _rtw_memcpy( pwdinfo->p2p_peer_device_addr, group_id.go_device_addr , ETH_ALEN ); ++ rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT ); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_JOIN ); ++ status_code = P2P_STATUS_SUCCESS; ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] P2P Group ID Attribute NOT FOUND!\n", __FUNCTION__ ); ++ status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ } ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] P2P Invitation Flags Attribute NOT FOUND!\n", __FUNCTION__ ); ++ status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ } ++ ++ DBG_871X( "[%s] status_code = %d\n", __FUNCTION__, status_code ); ++ ++ pwdinfo->inviteresp_info.token = frame_body[ 7 ]; ++ issue_p2p_invitation_response( padapter, GetAddr2Ptr(pframe), pwdinfo->inviteresp_info.token, status_code ); ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 3000 ); ++ } ++#ifdef CONFIG_INTEL_WIDI ++ if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) ) ++ { ++ padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION; ++ _cancel_timer_ex(&(padapter->mlmepriv.listen_timer)); ++ intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL); ++ } ++#endif //CONFIG_INTEL_WIDI ++ break; ++ } ++ case P2P_INVIT_RESP: ++ { ++ u8 attr_content = 0x00; ++ u32 attr_contentlen = 0; ++ ++ DBG_871X( "[%s] Got invite response frame!\n", __FUNCTION__ ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) ) ++ { ++ rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen); ++ ++ if ( attr_contentlen == 1 ) ++ { ++ DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content ); ++ pwdinfo->invitereq_info.benable = _FALSE; ++ ++ if ( attr_content == P2P_STATUS_SUCCESS ) ++ { ++ if ( _rtw_memcmp( pwdinfo->invitereq_info.go_bssid, myid( &padapter->eeprompriv ), ETH_ALEN )) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO ); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_OK ); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL ); ++ } ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL ); ++ } ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL ); ++ } ++ ++ if ( rtw_p2p_chk_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL ) ) ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, 5000 ); ++ } ++ break; ++ } ++ case P2P_DEVDISC_REQ: ++ ++ process_p2p_devdisc_req(pwdinfo, pframe, len); ++ ++ break; ++ ++ case P2P_DEVDISC_RESP: ++ ++ process_p2p_devdisc_resp(pwdinfo, pframe, len); ++ ++ break; ++ ++ case P2P_PROVISION_DISC_REQ: ++ DBG_871X( "[%s] Got Provisioning Discovery Request Frame\n", __FUNCTION__ ); ++ process_p2p_provdisc_req(pwdinfo, pframe, len); ++ _rtw_memcpy(pwdinfo->rx_prov_disc_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN); ++ ++ //20110902 Kurt ++ //Add the following statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered. ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ)) ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ); ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT ); ++#ifdef CONFIG_INTEL_WIDI ++ if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) ) ++ { ++ padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION; ++ _cancel_timer_ex(&(padapter->mlmepriv.listen_timer)); ++ intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL); ++ } ++#endif //CONFIG_INTEL_WIDI ++ break; ++ ++ case P2P_PROVISION_DISC_RESP: ++ // Commented by Albert 20110707 ++ // Should we check the pwdinfo->tx_prov_disc_info.bsent flag here?? ++ DBG_871X( "[%s] Got Provisioning Discovery Response Frame\n", __FUNCTION__ ); ++ // Commented by Albert 20110426 ++ // The restore timer is enabled when issuing the provisioing request frame in rtw_p2p_prov_disc function. ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_RSP); ++ process_p2p_provdisc_resp(pwdinfo, pframe); ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT ); ++ break; ++ ++ } ++ } ++#endif //CONFIG_P2P ++ ++exit: ++ ++ if(merged_p2pie) ++ { ++ rtw_mfree(merged_p2pie, merged_p2p_ielen); ++ } ++ ++ return _SUCCESS; ++} ++ ++unsigned int on_action_public_vendor(union recv_frame *precv_frame) ++{ ++ unsigned int ret = _FAIL; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint frame_len = precv_frame->u.hdr.len; ++ u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ if (_rtw_memcmp(frame_body + 2, P2P_OUI, 4) == _TRUE) { ++ ret = on_action_public_p2p(precv_frame); ++ } ++ ++ return ret; ++} ++ ++unsigned int on_action_public_default(union recv_frame *precv_frame, u8 action) ++{ ++ unsigned int ret = _FAIL; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint frame_len = precv_frame->u.hdr.len; ++ u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr); ++ u8 token; ++ _adapter *adapter = precv_frame->u.hdr.adapter; ++ int cnt = 0; ++ char msg[64]; ++ ++ token = frame_body[2]; ++ ++ if (rtw_action_public_decache(precv_frame, token) == _FAIL) ++ goto exit; ++ ++ #ifdef CONFIG_IOCTL_CFG80211 ++ cnt += sprintf((msg+cnt), "%s(token:%u)", action_public_str(action), token); ++ rtw_cfg80211_rx_action(adapter, pframe, frame_len, msg); ++ #endif ++ ++ ret = _SUCCESS; ++ ++exit: ++ return ret; ++} ++ ++unsigned int on_action_public(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ unsigned int ret = _FAIL; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint frame_len = precv_frame->u.hdr.len; ++ u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr); ++ u8 category, action; ++ ++ /* check RA matches or not */ ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN)) ++ goto exit; ++ ++ category = frame_body[0]; ++ if(category != RTW_WLAN_CATEGORY_PUBLIC) ++ goto exit; ++ ++ action = frame_body[1]; ++ switch (action) { ++ case ACT_PUBLIC_VENDOR: ++ ret = on_action_public_vendor(precv_frame); ++ break; ++ default: ++ ret = on_action_public_default(precv_frame, action); ++ break; ++ } ++ ++exit: ++ return ret; ++} ++ ++unsigned int OnAction_ht(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ return _SUCCESS; ++} ++ ++#ifdef CONFIG_IEEE80211W ++unsigned int OnAction_sa_query(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ unsigned short tid; ++ //Baron ++ ++ DBG_871X("OnAction_sa_query\n"); ++ ++ switch (pframe[WLAN_HDR_A3_LEN+1]) ++ { ++ case 0: //SA Query req ++ _rtw_memcpy(&tid, &pframe[WLAN_HDR_A3_LEN+2], sizeof(unsigned short)); ++ DBG_871X("OnAction_sa_query request,action=%d, tid=%04x\n", pframe[WLAN_HDR_A3_LEN+1], tid); ++ issue_action_SA_Query(padapter, GetAddr2Ptr(pframe), 1, tid); ++ break; ++ ++ case 1: //SA Query rsp ++ _cancel_timer_ex(&pmlmeext->sa_query_timer); ++ DBG_871X("OnAction_sa_query response,action=%d, tid=%04x, cancel timer\n", pframe[WLAN_HDR_A3_LEN+1], pframe[WLAN_HDR_A3_LEN+2]); ++ break; ++ default: ++ break; ++ } ++ if(0) ++ { ++ int pp; ++ printk("pattrib->pktlen = %d =>", pattrib->pkt_len); ++ for(pp=0;pp< pattrib->pkt_len; pp++) ++ printk(" %02x ", pframe[pp]); ++ printk("\n"); ++ } ++ ++ return _SUCCESS; ++} ++#endif //CONFIG_IEEE80211W ++ ++unsigned int OnAction_wmm(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ return _SUCCESS; ++} ++ ++unsigned int OnAction_p2p(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_P2P ++ u8 *frame_body; ++ u8 category, OUI_Subtype, dialogToken=0; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ uint len = precv_frame->u.hdr.len; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ //check RA matches or not ++ if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN))//for if1, sta/ap mode ++ return _SUCCESS; ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ category = frame_body[0]; ++ if(category != RTW_WLAN_CATEGORY_P2P) ++ return _SUCCESS; ++ ++ if ( cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ) != P2POUI ) ++ return _SUCCESS; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ rtw_cfg80211_rx_action_p2p(padapter, pframe, len); ++ return _SUCCESS; ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ len -= sizeof(struct rtw_ieee80211_hdr_3addr); ++ OUI_Subtype = frame_body[5]; ++ dialogToken = frame_body[6]; ++ ++ switch(OUI_Subtype) ++ { ++ case P2P_NOTICE_OF_ABSENCE: ++ ++ break; ++ ++ case P2P_PRESENCE_REQUEST: ++ ++ process_p2p_presence_req(pwdinfo, pframe, len); ++ ++ break; ++ ++ case P2P_PRESENCE_RESPONSE: ++ ++ break; ++ ++ case P2P_GO_DISC_REQUEST: ++ ++ break; ++ ++ default: ++ break; ++ ++ } ++ } ++#endif //CONFIG_P2P ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int OnAction(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ int i; ++ unsigned char category; ++ struct action_handler *ptable; ++ unsigned char *frame_body; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ category = frame_body[0]; ++ ++ for(i = 0; i < sizeof(OnAction_tbl)/sizeof(struct action_handler); i++) ++ { ++ ptable = &OnAction_tbl[i]; ++ ++ if(category == ptable->num) ++ ptable->func(padapter, precv_frame); ++ ++ } ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int DoReserved(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ ++ //DBG_871X("rcvd mgt frame(%x, %x)\n", (GetFrameSubType(pframe) >> 4), *(unsigned int *)GetAddr1Ptr(pframe)); ++ return _SUCCESS; ++} ++ ++struct xmit_frame *_alloc_mgtxmitframe(struct xmit_priv *pxmitpriv, bool once) ++{ ++ struct xmit_frame *pmgntframe; ++ struct xmit_buf *pxmitbuf; ++ ++ if (once) ++ pmgntframe = rtw_alloc_xmitframe_once(pxmitpriv); ++ else ++ pmgntframe = rtw_alloc_xmitframe_ext(pxmitpriv); ++ ++ if (pmgntframe == NULL) { ++ DBG_871X(FUNC_ADPT_FMT" alloc xmitframe fail, once:%d\n", FUNC_ADPT_ARG(pxmitpriv->adapter), once); ++ goto exit; ++ } ++ ++ if ((pxmitbuf = rtw_alloc_xmitbuf_ext(pxmitpriv)) == NULL) { ++ DBG_871X(FUNC_ADPT_FMT" alloc xmitbuf fail\n", FUNC_ADPT_ARG(pxmitpriv->adapter)); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ pmgntframe = NULL; ++ goto exit; ++ } ++ ++ pmgntframe->frame_tag = MGNT_FRAMETAG; ++ pmgntframe->pxmitbuf = pxmitbuf; ++ pmgntframe->buf_addr = pxmitbuf->pbuf; ++ pxmitbuf->priv_data = pmgntframe; ++ ++exit: ++ return pmgntframe; ++ ++} ++ ++inline struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv) ++{ ++ return _alloc_mgtxmitframe(pxmitpriv, _FALSE); ++} ++ ++inline struct xmit_frame *alloc_mgtxmitframe_once(struct xmit_priv *pxmitpriv) ++{ ++ return _alloc_mgtxmitframe(pxmitpriv, _TRUE); ++} ++ ++ ++/**************************************************************************** ++ ++Following are some TX fuctions for WiFi MLME ++ ++*****************************************************************************/ ++ ++void update_mgnt_tx_rate(_adapter *padapter, u8 rate) ++{ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ pmlmeext->tx_rate = rate; ++ ++ //DBG_871X("%s(): rate = %x\n",__FUNCTION__, rate); ++} ++ ++void update_mgntframe_attrib(_adapter *padapter, struct pkt_attrib *pattrib) ++{ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ _rtw_memset((u8 *)(pattrib), 0, sizeof(struct pkt_attrib)); ++ ++ pattrib->hdrlen = 24; ++ pattrib->nr_frags = 1; ++ pattrib->priority = 7; ++ pattrib->mac_id = 0; ++ pattrib->qsel = 0x12; ++ ++ pattrib->pktlen = 0; ++ ++ if(pmlmeext->cur_wireless_mode & WIRELESS_11B) ++ pattrib->raid = 6;//b mode ++ else ++ pattrib->raid = 5;//a/g mode ++ ++ pattrib->encrypt = _NO_PRIVACY_; ++ pattrib->bswenc = _FALSE; ++ ++ pattrib->qos_en = _FALSE; ++ pattrib->ht_en = _FALSE; ++ pattrib->bwmode = HT_CHANNEL_WIDTH_20; ++ pattrib->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ pattrib->sgi = _FALSE; ++ ++ pattrib->seqnum = pmlmeext->mgnt_seq; ++ ++ pattrib->retry_ctrl = _TRUE; ++ ++} ++ ++void dump_mgntframe(_adapter *padapter, struct xmit_frame *pmgntframe) ++{ ++ if(padapter->bSurpriseRemoved == _TRUE || ++ padapter->bDriverStopped == _TRUE) ++ { ++ rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe); ++ return; ++ } ++ ++ rtw_hal_mgnt_xmit(padapter, pmgntframe); ++} ++ ++s32 dump_mgntframe_and_wait(_adapter *padapter, struct xmit_frame *pmgntframe, int timeout_ms) ++{ ++ s32 ret = _FAIL; ++ _irqL irqL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct xmit_buf *pxmitbuf = pmgntframe->pxmitbuf; ++ struct submit_ctx sctx; ++ ++ if(padapter->bSurpriseRemoved == _TRUE || ++ padapter->bDriverStopped == _TRUE) ++ { ++ rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe); ++ return ret; ++ } ++ ++ rtw_sctx_init(&sctx, timeout_ms); ++ pxmitbuf->sctx = &sctx; ++ ++ ret = rtw_hal_mgnt_xmit(padapter, pmgntframe); ++ ++ if (ret == _SUCCESS) ++ ret = rtw_sctx_wait(&sctx); ++ ++ _enter_critical(&pxmitpriv->lock_sctx, &irqL); ++ pxmitbuf->sctx = NULL; ++ _exit_critical(&pxmitpriv->lock_sctx, &irqL); ++ ++ return ret; ++} ++ ++s32 dump_mgntframe_and_wait_ack(_adapter *padapter, struct xmit_frame *pmgntframe) ++{ ++#ifdef CONFIG_XMIT_ACK ++ s32 ret = _FAIL; ++ u32 timeout_ms = 500;// 500ms ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ #ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->pbuddy_adapter && !padapter->isprimary) ++ pxmitpriv = &(padapter->pbuddy_adapter->xmitpriv); ++ #endif ++ ++ if(padapter->bSurpriseRemoved == _TRUE || ++ padapter->bDriverStopped == _TRUE) ++ { ++ rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe); ++ return -1; ++ } ++ ++ _enter_critical_mutex(&pxmitpriv->ack_tx_mutex, NULL); ++ pxmitpriv->ack_tx = _TRUE; ++ ++ pmgntframe->ack_report = 1; ++ if (rtw_hal_mgnt_xmit(padapter, pmgntframe) == _SUCCESS) { ++ ret = rtw_ack_tx_wait(pxmitpriv, timeout_ms); ++ } ++ ++ pxmitpriv->ack_tx = _FALSE; ++ _exit_critical_mutex(&pxmitpriv->ack_tx_mutex, NULL); ++ ++ return ret; ++#else //!CONFIG_XMIT_ACK ++ dump_mgntframe(padapter, pmgntframe); ++ rtw_msleep_os(50); ++ return _SUCCESS; ++#endif //!CONFIG_XMIT_ACK ++} ++ ++int update_hidden_ssid(u8 *ies, u32 ies_len, u8 hidden_ssid_mode) ++{ ++ u8 *ssid_ie; ++ sint ssid_len_ori; ++ int len_diff = 0; ++ ++ ssid_ie = rtw_get_ie(ies, WLAN_EID_SSID, &ssid_len_ori, ies_len); ++ ++ //DBG_871X("%s hidden_ssid_mode:%u, ssid_ie:%p, ssid_len_ori:%d\n", __FUNCTION__, hidden_ssid_mode, ssid_ie, ssid_len_ori); ++ ++ if(ssid_ie && ssid_len_ori>0) ++ { ++ switch(hidden_ssid_mode) ++ { ++ case 1: ++ { ++ u8 *next_ie = ssid_ie + 2 + ssid_len_ori; ++ u32 remain_len = 0; ++ ++ remain_len = ies_len -(next_ie-ies); ++ ++ ssid_ie[1] = 0; ++ _rtw_memcpy(ssid_ie+2, next_ie, remain_len); ++ len_diff -= ssid_len_ori; ++ ++ break; ++ } ++ case 2: ++ _rtw_memset(&ssid_ie[2], 0, ssid_len_ori); ++ break; ++ default: ++ break; ++ } ++ } ++ ++ return len_diff; ++} ++ ++void issue_beacon(_adapter *padapter) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned int rate_len; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s, alloc mgnt frame fail\n", __FUNCTION__); ++ return; ++ } ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ _enter_critical_bh(&pmlmepriv->bcn_update_lock, &irqL); ++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ pattrib->qsel = 0x10; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/); ++ //pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_BEACON); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ //DBG_871X("ie len=%d\n", cur_network->IELength); ++#ifdef CONFIG_P2P ++ // for P2P : Primary Device Type & Device Name ++ u32 wpsielen=0, insert_len=0; ++ u8 *wpsie=NULL; ++ wpsie = rtw_get_wps_ie(cur_network->IEs+_FIXED_IE_LENGTH_, cur_network->IELength-_FIXED_IE_LENGTH_, NULL, &wpsielen); ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && wpsie && wpsielen>0) ++ { ++ uint wps_offset, remainder_ielen; ++ u8 *premainder_ie, *pframe_wscie; ++ ++ wps_offset = (uint)(wpsie - cur_network->IEs); ++ ++ premainder_ie = wpsie + wpsielen; ++ ++ remainder_ielen = cur_network->IELength - wps_offset - wpsielen; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(pmlmepriv->wps_beacon_ie && pmlmepriv->wps_beacon_ie_len>0) ++ { ++ _rtw_memcpy(pframe, cur_network->IEs, wps_offset); ++ pframe += wps_offset; ++ pattrib->pktlen += wps_offset; ++ ++ _rtw_memcpy(pframe, pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len); ++ pframe += pmlmepriv->wps_beacon_ie_len; ++ pattrib->pktlen += pmlmepriv->wps_beacon_ie_len; ++ ++ //copy remainder_ie to pframe ++ _rtw_memcpy(pframe, premainder_ie, remainder_ielen); ++ pframe += remainder_ielen; ++ pattrib->pktlen += remainder_ielen; ++ } ++ else ++ { ++ _rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength); ++ pframe += cur_network->IELength; ++ pattrib->pktlen += cur_network->IELength; ++ } ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ pframe_wscie = pframe + wps_offset; ++ _rtw_memcpy(pframe, cur_network->IEs, wps_offset+wpsielen); ++ pframe += (wps_offset + wpsielen); ++ pattrib->pktlen += (wps_offset + wpsielen); ++ ++ //now pframe is end of wsc ie, insert Primary Device Type & Device Name ++ // Primary Device Type ++ // Type: ++ *(u16*) ( pframe + insert_len) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE ); ++ insert_len += 2; ++ ++ // Length: ++ *(u16*) ( pframe + insert_len ) = cpu_to_be16( 0x0008 ); ++ insert_len += 2; ++ ++ // Value: ++ // Category ID ++ *(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ insert_len += 2; ++ ++ // OUI ++ *(u32*) ( pframe + insert_len ) = cpu_to_be32( WPSOUI ); ++ insert_len += 4; ++ ++ // Sub Category ID ++ *(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ insert_len += 2; ++ ++ ++ // Device Name ++ // Type: ++ *(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ insert_len += 2; ++ ++ // Length: ++ *(u16*) ( pframe + insert_len ) = cpu_to_be16( pwdinfo->device_name_len ); ++ insert_len += 2; ++ ++ // Value: ++ _rtw_memcpy( pframe + insert_len, pwdinfo->device_name, pwdinfo->device_name_len ); ++ insert_len += pwdinfo->device_name_len; ++ ++ ++ //update wsc ie length ++ *(pframe_wscie+1) = (wpsielen -2) + insert_len; ++ ++ //pframe move to end ++ pframe+=insert_len; ++ pattrib->pktlen += insert_len; ++ ++ //copy remainder_ie to pframe ++ _rtw_memcpy(pframe, premainder_ie, remainder_ielen); ++ pframe += remainder_ielen; ++ pattrib->pktlen += remainder_ielen; ++ } ++ } ++ else ++#endif //CONFIG_P2P ++ { ++ int len_diff; ++ _rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength); ++ len_diff = update_hidden_ssid( ++ pframe+_BEACON_IE_OFFSET_ ++ , cur_network->IELength-_BEACON_IE_OFFSET_ ++ , pmlmeinfo->hidden_ssid_mode ++ ); ++ pframe += (cur_network->IELength+len_diff); ++ pattrib->pktlen += (cur_network->IELength+len_diff); ++ } ++ ++ { ++ u8 *wps_ie; ++ uint wps_ielen; ++ u8 sr = 0; ++ wps_ie = rtw_get_wps_ie(pmgntframe->buf_addr+TXDESC_OFFSET+sizeof (struct rtw_ieee80211_hdr_3addr)+_BEACON_IE_OFFSET_, ++ pattrib->pktlen-sizeof (struct rtw_ieee80211_hdr_3addr)-_BEACON_IE_OFFSET_, NULL, &wps_ielen); ++ if (wps_ie && wps_ielen>0) { ++ rtw_get_wps_attr_content(wps_ie, wps_ielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL); ++ } ++ if (sr != 0) ++ set_fwstate(pmlmepriv, WIFI_UNDER_WPS); ++ else ++ _clr_fwstate_(pmlmepriv, WIFI_UNDER_WPS); ++ } ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ u32 len; ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ len = pmlmepriv->p2p_beacon_ie_len; ++ if(pmlmepriv->p2p_beacon_ie && len>0) ++ _rtw_memcpy(pframe, pmlmepriv->p2p_beacon_ie, len); ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ len = build_beacon_p2p_ie(pwdinfo, pframe); ++ } ++ ++ pframe += len; ++ pattrib->pktlen += len; ++#ifdef CONFIG_WFD ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(_TRUE == pwdinfo->wfd_info->wfd_enable) ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ len = build_beacon_wfd_ie( pwdinfo, pframe ); ++ } ++#ifdef CONFIG_IOCTL_CFG80211 ++ else ++ { ++ len = 0; ++ if(pmlmepriv->wfd_beacon_ie && pmlmepriv->wfd_beacon_ie_len>0) ++ { ++ len = pmlmepriv->wfd_beacon_ie_len; ++ _rtw_memcpy(pframe, pmlmepriv->wfd_beacon_ie, len); ++ } ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ pframe += len; ++ pattrib->pktlen += len; ++#endif //CONFIG_WFD ++ } ++#endif //CONFIG_P2P ++ ++ goto _issue_bcn; ++ ++ } ++ ++ //below for ad-hoc mode ++ ++ //timestamp will be inserted by hardware ++ pframe += 8; ++ pattrib->pktlen += 8; ++ ++ // beacon interval: 2 bytes ++ ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ // capability info: 2 bytes ++ ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ // SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pattrib->pktlen); ++ ++ // supported rates... ++ rate_len = rtw_get_rateset_len(cur_network->SupportedRates); ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pattrib->pktlen); ++ ++ // DS parameter set ++ pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pattrib->pktlen); ++ ++ //if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ u8 erpinfo=0; ++ u32 ATIMWindow; ++ // IBSS Parameter Set... ++ //ATIMWindow = cur->Configuration.ATIMWindow; ++ ATIMWindow = 0; ++ pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pattrib->pktlen); ++ ++ //ERP IE ++ pframe = rtw_set_ie(pframe, _ERPINFO_IE_, 1, &erpinfo, &pattrib->pktlen); ++ } ++ ++ ++ // EXTERNDED SUPPORTED RATE ++ if (rate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pattrib->pktlen); ++ } ++ ++ ++ //todo:HT for adhoc ++ ++_issue_bcn: ++ ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ pmlmepriv->update_bcn = _FALSE; ++ ++ _exit_critical_bh(&pmlmepriv->bcn_update_lock, &irqL); ++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ ++ if ((pattrib->pktlen + TXDESC_SIZE) > 512) ++ { ++ DBG_871X("beacon frame too large\n"); ++ return; ++ } ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ //DBG_871X("issue bcn_sz=%d\n", pattrib->last_txcmdsz); ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++void issue_probersp(_adapter *padapter, unsigned char *da, u8 is_valid_p2p_probereq) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned char *mac, *bssid; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ u8 *pwps_ie; ++ uint wps_ielen; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ unsigned int rate_len; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++#endif //CONFIG_P2P ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s, alloc mgnt frame fail\n", __FUNCTION__); ++ return; ++ } ++ ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ mac = myid(&(padapter->eeprompriv)); ++ bssid = cur_network->MacAddress; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, bssid, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(fctrl, WIFI_PROBERSP); ++ ++ pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = pattrib->hdrlen; ++ pframe += pattrib->hdrlen; ++ ++ ++ if(cur_network->IELength>MAX_IE_SZ) ++ return; ++ ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ pwps_ie = rtw_get_wps_ie(cur_network->IEs+_FIXED_IE_LENGTH_, cur_network->IELength-_FIXED_IE_LENGTH_, NULL, &wps_ielen); ++ ++ //inerset & update wps_probe_resp_ie ++ if((pmlmepriv->wps_probe_resp_ie!=NULL) && pwps_ie && (wps_ielen>0)) ++ { ++ uint wps_offset, remainder_ielen; ++ u8 *premainder_ie; ++ ++ wps_offset = (uint)(pwps_ie - cur_network->IEs); ++ ++ premainder_ie = pwps_ie + wps_ielen; ++ ++ remainder_ielen = cur_network->IELength - wps_offset - wps_ielen; ++ ++ _rtw_memcpy(pframe, cur_network->IEs, wps_offset); ++ pframe += wps_offset; ++ pattrib->pktlen += wps_offset; ++ ++ wps_ielen = (uint)pmlmepriv->wps_probe_resp_ie[1];//to get ie data len ++ if((wps_offset+wps_ielen+2)<=MAX_IE_SZ) ++ { ++ _rtw_memcpy(pframe, pmlmepriv->wps_probe_resp_ie, wps_ielen+2); ++ pframe += wps_ielen+2; ++ pattrib->pktlen += wps_ielen+2; ++ } ++ ++ if((wps_offset+wps_ielen+2+remainder_ielen)<=MAX_IE_SZ) ++ { ++ _rtw_memcpy(pframe, premainder_ie, remainder_ielen); ++ pframe += remainder_ielen; ++ pattrib->pktlen += remainder_ielen; ++ } ++ } ++ else ++ { ++ _rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength); ++ pframe += cur_network->IELength; ++ pattrib->pktlen += cur_network->IELength; ++ } ++ ++ /* retrieve SSID IE from cur_network->Ssid */ ++ { ++ u8 *ssid_ie; ++ sint ssid_ielen; ++ sint ssid_ielen_diff; ++ u8 buf[MAX_IE_SZ]; ++ u8 *ies = pmgntframe->buf_addr+TXDESC_OFFSET+sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ ssid_ie = rtw_get_ie(ies+_FIXED_IE_LENGTH_, _SSID_IE_, &ssid_ielen, ++ (pframe-ies)-_FIXED_IE_LENGTH_); ++ ++ ssid_ielen_diff = cur_network->Ssid.SsidLength - ssid_ielen; ++ ++ if (ssid_ie && cur_network->Ssid.SsidLength) { ++ uint remainder_ielen; ++ u8 *remainder_ie; ++ remainder_ie = ssid_ie+2; ++ remainder_ielen = (pframe-remainder_ie); ++ ++ LOG_LEVEL(_drv_warning_, FUNC_ADPT_FMT" remainder_ielen > MAX_IE_SZ\n", FUNC_ADPT_ARG(padapter)); ++ if (remainder_ielen > MAX_IE_SZ) { ++ remainder_ielen = MAX_IE_SZ; ++ } ++ ++ _rtw_memcpy(buf, remainder_ie, remainder_ielen); ++ _rtw_memcpy(remainder_ie+ssid_ielen_diff, buf, remainder_ielen); ++ *(ssid_ie+1) = cur_network->Ssid.SsidLength; ++ _rtw_memcpy(ssid_ie+2, cur_network->Ssid.Ssid, cur_network->Ssid.SsidLength); ++ ++ pframe += ssid_ielen_diff; ++ pattrib->pktlen += ssid_ielen_diff; ++ } ++ } ++ } ++ else ++#endif ++ { ++ ++ //timestamp will be inserted by hardware ++ pframe += 8; ++ pattrib->pktlen += 8; ++ ++ // beacon interval: 2 bytes ++ ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ // capability info: 2 bytes ++ ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //below for ad-hoc mode ++ ++ // SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pattrib->pktlen); ++ ++ // supported rates... ++ rate_len = rtw_get_rateset_len(cur_network->SupportedRates); ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pattrib->pktlen); ++ ++ // DS parameter set ++ pframe =rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pattrib->pktlen); ++ ++ if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ u8 erpinfo=0; ++ u32 ATIMWindow; ++ // IBSS Parameter Set... ++ //ATIMWindow = cur->Configuration.ATIMWindow; ++ ATIMWindow = 0; ++ pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pattrib->pktlen); ++ ++ //ERP IE ++ pframe = rtw_set_ie(pframe, _ERPINFO_IE_, 1, &erpinfo, &pattrib->pktlen); ++ } ++ ++ ++ // EXTERNDED SUPPORTED RATE ++ if (rate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pattrib->pktlen); ++ } ++ ++ ++ //todo:HT for adhoc ++ ++ } ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) /*&& is_valid_p2p_probereq*/) ++ { ++ u32 len; ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ //if pwdinfo->role == P2P_ROLE_DEVICE will call issue_probersp_p2p() ++ len = pmlmepriv->p2p_go_probe_resp_ie_len; ++ if(pmlmepriv->p2p_go_probe_resp_ie && len>0) ++ _rtw_memcpy(pframe, pmlmepriv->p2p_go_probe_resp_ie, len); ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ len = build_probe_resp_p2p_ie(pwdinfo, pframe); ++ } ++ ++ pframe += len; ++ pattrib->pktlen += len; ++ ++#ifdef CONFIG_WFD ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(_TRUE == pwdinfo->wfd_info->wfd_enable) ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ len = build_probe_resp_wfd_ie(pwdinfo, pframe, 0); ++ } ++#ifdef CONFIG_IOCTL_CFG80211 ++ else ++ { ++ len = 0; ++ if(pmlmepriv->wfd_probe_resp_ie && pmlmepriv->wfd_probe_resp_ie_len>0) ++ { ++ len = pmlmepriv->wfd_probe_resp_ie_len; ++ _rtw_memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, len); ++ } ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ pframe += len; ++ pattrib->pktlen += len; ++#endif //CONFIG_WFD ++ ++ } ++#endif //CONFIG_P2P ++ ++ ++#ifdef CONFIG_AUTO_AP_MODE ++{ ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("(%s)\n", __FUNCTION__); ++ ++ //check rc station ++ psta = rtw_get_stainfo(pstapriv, da); ++ if (psta && psta->isrc && psta->pid>0) ++ { ++ u8 RC_OUI[4]={0x00,0xE0,0x4C,0x0A}; ++ u8 RC_INFO[14] = {0}; ++ //EID[1] + EID_LEN[1] + RC_OUI[4] + MAC[6] + PairingID[2] + ChannelNum[2] ++ u16 cu_ch = (u16)cur_network->Configuration.DSConfig; ++ ++ DBG_871X("%s, reply rc(pid=0x%x) device "MAC_FMT" in ch=%d\n", __FUNCTION__, ++ psta->pid, MAC_ARG(psta->hwaddr), cu_ch); ++ ++ //append vendor specific ie ++ _rtw_memcpy(RC_INFO, RC_OUI, sizeof(RC_OUI)); ++ _rtw_memcpy(&RC_INFO[4], mac, ETH_ALEN); ++ _rtw_memcpy(&RC_INFO[10], (u8*)&psta->pid, 2); ++ _rtw_memcpy(&RC_INFO[12], (u8*)&cu_ch, 2); ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, sizeof(RC_INFO), RC_INFO, &pattrib->pktlen); ++ } ++} ++#endif //CONFIG_AUTO_AP_MODE ++ ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++int _issue_probereq(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da, int wait_ack) ++{ ++ int ret = _FAIL; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned char *mac; ++ unsigned char bssrate[NumRates]; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ int bssrate_len = 0; ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_notice_,("+issue_probereq\n")); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ mac = myid(&(padapter->eeprompriv)); ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ if (da) ++ { ++ // unicast probe request frame ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, da, ETH_ALEN); ++ } ++ else ++ { ++ // broadcast probe request frame ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, bc_addr, ETH_ALEN); ++ } ++ ++ _rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_PROBEREQ); ++ ++ pframe += sizeof (struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ if(pssid) ++ pframe = rtw_set_ie(pframe, _SSID_IE_, pssid->SsidLength, pssid->Ssid, &(pattrib->pktlen)); ++ else ++ pframe = rtw_set_ie(pframe, _SSID_IE_, 0, NULL, &(pattrib->pktlen)); ++ ++ get_rate_set(padapter, bssrate, &bssrate_len); ++ ++ if (bssrate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen)); ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen)); ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen)); ++ } ++ ++#if 0 ++ //add wps_ie for wps2.0 ++ if(pmlmepriv->probereq_wpsie_len>0 && pmlmepriv->probereq_wpsie_lenprobereq_wpsie, pmlmepriv->probereq_wpsie_len); ++ pframe += pmlmepriv->probereq_wpsie_len; ++ pattrib->pktlen += pmlmepriv->probereq_wpsie_len; ++ //pmlmepriv->probereq_wpsie_len = 0 ;//reset to zero ++ } ++#else ++ //add wps_ie for wps2.0 ++ if(pmlmepriv->wps_probe_req_ie_len>0 && pmlmepriv->wps_probe_req_ie) ++ { ++ _rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len); ++ pframe += pmlmepriv->wps_probe_req_ie_len; ++ pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len; ++ //pmlmepriv->wps_probe_req_ie_len = 0 ;//reset to zero ++ } ++#endif ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_notice_,("issuing probe_req, tx_len=%d\n", pattrib->last_txcmdsz)); ++ ++ if (wait_ack) { ++ ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe); ++ } else { ++ dump_mgntframe(padapter, pmgntframe); ++ ret = _SUCCESS; ++ } ++ ++exit: ++ return ret; ++} ++ ++inline void issue_probereq(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da) ++{ ++ _issue_probereq(padapter, pssid, da, _FALSE); ++} ++ ++int issue_probereq_ex(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da, ++ int try_cnt, int wait_ms) ++{ ++ int ret; ++ int i = 0; ++ u32 start = rtw_get_current_time(); ++ ++ do ++ { ++ ret = _issue_probereq(padapter, pssid, da, wait_ms>0?_TRUE:_FALSE); ++ ++ i++; ++ ++ if (padapter->bDriverStopped || padapter->bSurpriseRemoved) ++ break; ++ ++ if(i < try_cnt && wait_ms > 0 && ret==_FAIL) ++ rtw_msleep_os(wait_ms); ++ ++ }while((ixmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_AUTH); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ ++ if(psta)// for AP mode ++ { ++#ifdef CONFIG_NATIVEAP_MLME ++ ++ _rtw_memcpy(pwlanhdr->addr1, psta->hwaddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ ++ // setting auth algo number ++ val16 = (u16)psta->authalg; ++ ++ if(status != _STATS_SUCCESSFUL_) ++ val16 = 0; ++ ++ if (val16) { ++ val16 = cpu_to_le16(val16); ++ use_shared_key = 1; ++ } ++ ++ pframe = rtw_set_fixed_ie(pframe, _AUTH_ALGM_NUM_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ // setting auth seq number ++ val16 =(u16)psta->auth_seq; ++ val16 = cpu_to_le16(val16); ++ pframe = rtw_set_fixed_ie(pframe, _AUTH_SEQ_NUM_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ // setting status code... ++ val16 = status; ++ val16 = cpu_to_le16(val16); ++ pframe = rtw_set_fixed_ie(pframe, _STATUS_CODE_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ // added challenging text... ++ if ((psta->auth_seq == 2) && (psta->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1)) ++ { ++ pframe = rtw_set_ie(pframe, _CHLGETXT_IE_, 128, psta->chg_txt, &(pattrib->pktlen)); ++ } ++#endif ++ } ++ else ++ { ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&pmlmeinfo->network), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&padapter->eeprompriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&pmlmeinfo->network), ETH_ALEN); ++ ++ // setting auth algo number ++ val16 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)? 1: 0;// 0:OPEN System, 1:Shared key ++ if (val16) { ++ val16 = cpu_to_le16(val16); ++ use_shared_key = 1; ++ } ++ //DBG_871X("%s auth_algo= %s auth_seq=%d\n",__FUNCTION__,(pmlmeinfo->auth_algo==0)?"OPEN":"SHARED",pmlmeinfo->auth_seq); ++ ++ //setting IV for auth seq #3 ++ if ((pmlmeinfo->auth_seq == 3) && (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1)) ++ { ++ //DBG_871X("==> iv(%d),key_index(%d)\n",pmlmeinfo->iv,pmlmeinfo->key_index); ++ val32 = ((pmlmeinfo->iv++) | (pmlmeinfo->key_index << 30)); ++ val32 = cpu_to_le32(val32); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *)&val32, &(pattrib->pktlen)); ++ ++ pattrib->iv_len = 4; ++ } ++ ++ pframe = rtw_set_fixed_ie(pframe, _AUTH_ALGM_NUM_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ // setting auth seq number ++ val16 = pmlmeinfo->auth_seq; ++ val16 = cpu_to_le16(val16); ++ pframe = rtw_set_fixed_ie(pframe, _AUTH_SEQ_NUM_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ ++ // setting status code... ++ val16 = status; ++ val16 = cpu_to_le16(val16); ++ pframe = rtw_set_fixed_ie(pframe, _STATUS_CODE_, (unsigned char *)&val16, &(pattrib->pktlen)); ++ ++ // then checking to see if sending challenging text... ++ if ((pmlmeinfo->auth_seq == 3) && (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1)) ++ { ++ pframe = rtw_set_ie(pframe, _CHLGETXT_IE_, 128, pmlmeinfo->chg_txt, &(pattrib->pktlen)); ++ ++ SetPrivacy(fctrl); ++ ++ pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pattrib->encrypt = _WEP40_; ++ ++ pattrib->icv_len = 4; ++ ++ pattrib->pktlen += pattrib->icv_len; ++ ++ } ++ ++ } ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ rtw_wep_encrypt(padapter, (u8 *)pmgntframe); ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++} ++ ++ ++void issue_asocrsp(_adapter *padapter, unsigned short status, struct sta_info *pstat, int pkt_type) ++{ ++#ifdef CONFIG_AP_MODE ++ struct xmit_frame *pmgntframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ struct pkt_attrib *pattrib; ++ unsigned char *pbuf, *pframe; ++ unsigned short val; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network); ++ u8 *ie = pnetwork->IEs; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++#endif //CONFIG_P2P ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy((void *)GetAddr1Ptr(pwlanhdr), pstat->hwaddr, ETH_ALEN); ++ _rtw_memcpy((void *)GetAddr2Ptr(pwlanhdr), myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy((void *)GetAddr3Ptr(pwlanhdr), get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ if ((pkt_type == WIFI_ASSOCRSP) || (pkt_type == WIFI_REASSOCRSP)) ++ SetFrameSubType(pwlanhdr, pkt_type); ++ else ++ return; ++ ++ pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen += pattrib->hdrlen; ++ pframe += pattrib->hdrlen; ++ ++ //capability ++ val = *(unsigned short *)rtw_get_capability_from_ie(ie); ++ ++ pframe = rtw_set_fixed_ie(pframe, _CAPABILITY_ , (unsigned char *)&val, &(pattrib->pktlen)); ++ ++ status = cpu_to_le16(status); ++ pframe = rtw_set_fixed_ie(pframe , _STATUS_CODE_ , (unsigned char *)&status, &(pattrib->pktlen)); ++ ++ val = cpu_to_le16(pstat->aid | BIT(14) | BIT(15)); ++ pframe = rtw_set_fixed_ie(pframe, _ASOC_ID_ , (unsigned char *)&val, &(pattrib->pktlen)); ++ ++ if (pstat->bssratelen <= 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, pstat->bssratelen, pstat->bssrateset, &(pattrib->pktlen)); ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pstat->bssrateset, &(pattrib->pktlen)); ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (pstat->bssratelen-8), pstat->bssrateset+8, &(pattrib->pktlen)); ++ } ++ ++#ifdef CONFIG_80211N_HT ++ if ((pstat->flags & WLAN_STA_HT) && (pmlmepriv->htpriv.ht_option)) ++ { ++ uint ie_len=0; ++ ++ //FILL HT CAP INFO IE ++ //p = hostapd_eid_ht_capabilities_info(hapd, p); ++ pbuf = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_)); ++ if(pbuf && ie_len>0) ++ { ++ _rtw_memcpy(pframe, pbuf, ie_len+2); ++ pframe += (ie_len+2); ++ pattrib->pktlen +=(ie_len+2); ++ } ++ ++ //FILL HT ADD INFO IE ++ //p = hostapd_eid_ht_operation(hapd, p); ++ pbuf = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_)); ++ if(pbuf && ie_len>0) ++ { ++ _rtw_memcpy(pframe, pbuf, ie_len+2); ++ pframe += (ie_len+2); ++ pattrib->pktlen +=(ie_len+2); ++ } ++ ++ } ++#endif ++ ++ //FILL WMM IE ++ if ((pstat->flags & WLAN_STA_WME) && (pmlmepriv->qospriv.qos_option)) ++ { ++ uint ie_len=0; ++ unsigned char WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01}; ++ ++ for (pbuf = ie + _BEACON_IE_OFFSET_; ;pbuf+= (ie_len + 2)) ++ { ++ pbuf = rtw_get_ie(pbuf, _VENDOR_SPECIFIC_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2))); ++ if(pbuf && _rtw_memcmp(pbuf+2, WMM_PARA_IE, 6)) ++ { ++ _rtw_memcpy(pframe, pbuf, ie_len+2); ++ pframe += (ie_len+2); ++ pattrib->pktlen +=(ie_len+2); ++ ++ break; ++ } ++ ++ if ((pbuf == NULL) || (ie_len == 0)) ++ { ++ break; ++ } ++ } ++ ++ } ++ ++ ++ if (pmlmeinfo->assoc_AP_vendor == realtekAP) ++ { ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 6 , REALTEK_96B_IE, &(pattrib->pktlen)); ++ } ++ ++ //add WPS IE ie for wps 2.0 ++ if(pmlmepriv->wps_assoc_resp_ie && pmlmepriv->wps_assoc_resp_ie_len>0) ++ { ++ _rtw_memcpy(pframe, pmlmepriv->wps_assoc_resp_ie, pmlmepriv->wps_assoc_resp_ie_len); ++ ++ pframe += pmlmepriv->wps_assoc_resp_ie_len; ++ pattrib->pktlen += pmlmepriv->wps_assoc_resp_ie_len; ++ } ++ ++#ifdef CONFIG_P2P ++ if( padapter->wdinfo.driver_interface == DRIVER_WEXT ) ++ { ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && (pstat->is_p2p_device == _TRUE)) ++ { ++ u32 len; ++ ++ len = build_assoc_resp_p2p_ie(pwdinfo, pframe, pstat->p2p_status_code); ++ ++ pframe += len; ++ pattrib->pktlen += len; ++ } ++ } ++#ifdef CONFIG_WFD ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) ++#ifdef CONFIG_IOCTL_CFG80211 ++ && (_TRUE == pwdinfo->wfd_info->wfd_enable) ++#endif //CONFIG_IOCTL_CFG80211 ++ ) ++ { ++ wfdielen = build_assoc_resp_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++#endif //CONFIG_WFD ++#endif //CONFIG_P2P ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++#endif ++} ++ ++void issue_assocreq(_adapter *padapter) ++{ ++ int ret = _FAIL; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe, *p; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned short val16; ++ unsigned int i, j, ie_len, index=0; ++ unsigned char rf_type, bssrate[NumRates], sta_bssrate[NumRates]; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ int bssrate_len = 0, sta_bssrate_len = 0; ++ u8 cbw40_enable = 0; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ u8 p2pie[ 255 ] = { 0x00 }; ++ u16 p2pielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_DFS ++ u16 cap; ++ u8 pow_cap_ele[2] = { 0x00 }; ++ u8 sup_ch[ 30 * 2 ] = {0x00 }, sup_ch_idx = 0, idx_5g = 2; //For supported channel ++#endif //CONFIG_DFS ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ goto exit; ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ASSOCREQ); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //caps ++ ++#ifdef CONFIG_DFS ++ _rtw_memcpy(&cap, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2); ++ if(pmlmeext->cur_channel > 14) ++ cap |= BIT(8); //Spectrum Mgmt. Enabled ++ _rtw_memcpy(pframe, &cap, 2); ++#else ++ _rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2); ++#endif //CONFIG_DFS ++ ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //listen interval ++ //todo: listen interval for power saving ++ val16 = cpu_to_le16(3); ++ _rtw_memcpy(pframe ,(unsigned char *)&val16, 2); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, pmlmeinfo->network.Ssid.SsidLength, pmlmeinfo->network.Ssid.Ssid, &(pattrib->pktlen)); ++ ++ //supported rate & extended supported rate ++ ++#if 1 // Check if the AP's supported rates are also supported by STA. ++ get_rate_set(padapter, sta_bssrate, &sta_bssrate_len); ++ //DBG_871X("sta_bssrate_len=%d\n", sta_bssrate_len); ++ ++ if(pmlmeext->cur_channel == 14)// for JAPAN, channel 14 can only uses B Mode(CCK) ++ { ++ sta_bssrate_len = 4; ++ } ++ ++ ++ //for (i = 0; i < sta_bssrate_len; i++) { ++ // DBG_871X("sta_bssrate[%d]=%02X\n", i, sta_bssrate[i]); ++ //} ++ ++ for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) { ++ if (pmlmeinfo->network.SupportedRates[i] == 0) break; ++ DBG_871X("network.SupportedRates[%d]=%02X\n", i, pmlmeinfo->network.SupportedRates[i]); ++ } ++ ++ ++ for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) { ++ if (pmlmeinfo->network.SupportedRates[i] == 0) break; ++ ++ ++ // Check if the AP's supported rates are also supported by STA. ++ for (j=0; j < sta_bssrate_len; j++) { ++ // Avoid the proprietary data rate (22Mbps) of Handlink WSG-4000 AP ++ if ( (pmlmeinfo->network.SupportedRates[i]|IEEE80211_BASIC_RATE_MASK) ++ == (sta_bssrate[j]|IEEE80211_BASIC_RATE_MASK)) { ++ //DBG_871X("match i = %d, j=%d\n", i, j); ++ break; ++ } else { ++ //DBG_871X("not match: %02X != %02X\n", (pmlmeinfo->network.SupportedRates[i]|IEEE80211_BASIC_RATE_MASK), (sta_bssrate[j]|IEEE80211_BASIC_RATE_MASK)); ++ } ++ } ++ ++ if (j == sta_bssrate_len) { ++ // the rate is not supported by STA ++ DBG_871X("%s(): the rate[%d]=%02X is not supported by STA!\n",__FUNCTION__, i, pmlmeinfo->network.SupportedRates[i]); ++ } else { ++ // the rate is supported by STA ++ bssrate[index++] = pmlmeinfo->network.SupportedRates[i]; ++ } ++ } ++ ++ bssrate_len = index; ++ DBG_871X("bssrate_len = %d\n", bssrate_len); ++ ++#else // Check if the AP's supported rates are also supported by STA. ++#if 0 ++ get_rate_set(padapter, bssrate, &bssrate_len); ++#else ++ for (bssrate_len = 0; bssrate_len < NumRates; bssrate_len++) { ++ if (pmlmeinfo->network.SupportedRates[bssrate_len] == 0) break; ++ ++ if (pmlmeinfo->network.SupportedRates[bssrate_len] == 0x2C) // Avoid the proprietary data rate (22Mbps) of Handlink WSG-4000 AP ++ break; ++ ++ bssrate[bssrate_len] = pmlmeinfo->network.SupportedRates[bssrate_len]; ++ } ++#endif ++#endif // Check if the AP's supported rates are also supported by STA. ++ ++ if (bssrate_len == 0) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; //don't connect to AP if no joint supported rate ++ } ++ ++ ++ if (bssrate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen)); ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen)); ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen)); ++ } ++ ++#ifdef CONFIG_DFS ++ if(pmlmeext->cur_channel > 14) ++ { ++ pow_cap_ele[0] = 13; // Minimum transmit power capability ++ pow_cap_ele[1] = 21; // Maximum transmit power capability ++ pframe = rtw_set_ie(pframe, _POW_CAP_IE_, 2, pow_cap_ele, &(pattrib->pktlen)); ++ ++ //supported channels ++ do{ ++ if( pmlmeext->channel_set[sup_ch_idx].ChannelNum <= 14 ) ++ { ++ sup_ch[0] = 1; //First channel number ++ sup_ch[1] = pmlmeext->channel_set[sup_ch_idx].ChannelNum; //Number of channel ++ } ++ else ++ { ++ sup_ch[idx_5g++] = pmlmeext->channel_set[sup_ch_idx].ChannelNum; ++ sup_ch[idx_5g++] = 1; ++ } ++ sup_ch_idx++; ++ } ++ while( pmlmeext->channel_set[sup_ch_idx].ChannelNum != 0 ); ++ pframe = rtw_set_ie(pframe, _SUPPORTED_CH_IE_, idx_5g, sup_ch, &(pattrib->pktlen)); ++ } ++#endif //CONFIG_DFS ++ ++ //RSN ++ p = rtw_get_ie((pmlmeinfo->network.IEs + sizeof(NDIS_802_11_FIXED_IEs)), _RSN_IE_2_, &ie_len, (pmlmeinfo->network.IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if (p != NULL) ++ { ++ pframe = rtw_set_ie(pframe, _RSN_IE_2_, ie_len, (p + 2), &(pattrib->pktlen)); ++ } ++ ++#ifdef CONFIG_80211N_HT ++ //HT caps ++ if(padapter->mlmepriv.htpriv.ht_option==_TRUE) ++ { ++ p = rtw_get_ie((pmlmeinfo->network.IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_CAPABILITY_IE_, &ie_len, (pmlmeinfo->network.IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if ((p != NULL) && (!(is_ap_in_tkip(padapter)))) ++ { ++ _rtw_memcpy(&(pmlmeinfo->HT_caps), (p + 2), sizeof(struct HT_caps_element)); ++ ++ //to disable 40M Hz support while gd_bw_40MHz_en = 0 ++ if( pmlmeext->cur_channel > 14) ++ { ++ if(pregpriv->cbw40_enable & BIT(1) ) ++ cbw40_enable=1; ++ } ++ else ++ if(pregpriv->cbw40_enable & BIT(0) ) ++ cbw40_enable=1; ++ ++ if (cbw40_enable == 0) ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info &= (~(BIT(6) | BIT(1))); ++ } ++ else ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= BIT(1); ++ } ++ ++ //todo: disable SM power save mode ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= 0x000c; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ //switch (pregpriv->rf_config) ++ switch(rf_type) ++ { ++ case RF_1T1R: ++ ++ if(pregpriv->rx_stbc) ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream ++ ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16); ++ break; ++ ++ case RF_2T2R: ++ case RF_1T2R: ++ default: ++ ++ ++ if(pregpriv->special_rf_path) ++ { ++ if(pregpriv->rx_stbc) ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16); ++ break; ++ } ++ ++ if((pregpriv->rx_stbc == 0x3) ||//enable for 2.4/5 GHz ++ ((pmlmeext->cur_wireless_mode & WIRELESS_11_24N) && (pregpriv->rx_stbc == 0x1)) || //enable for 2.4GHz ++ ((pmlmeext->cur_wireless_mode & WIRELESS_11_5N) && (pregpriv->rx_stbc == 0x2)) || //enable for 5GHz ++ (pregpriv->wifi_spec==1)) ++ { ++ DBG_871X("declare supporting RX STBC\n"); ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0200);//RX STBC two spatial stream ++ } ++ #ifdef CONFIG_DISABLE_MCS13TO15 ++ if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && (pregpriv->wifi_spec!=1)) ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R_MCS13TO15_OFF, 16); ++ else ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R, 16); ++ #else //CONFIG_DISABLE_MCS13TO15 ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R, 16); ++ #endif //CONFIG_DISABLE_MCS13TO15 ++ break; ++ } ++#ifdef RTL8192C_RECONFIG_TO_1T1R ++ { ++ if(pregpriv->rx_stbc) ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream ++ ++ _rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16); ++ } ++#endif ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info = cpu_to_le16(pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info); ++ pframe = rtw_set_ie(pframe, _HT_CAPABILITY_IE_, ie_len , (u8 *)(&(pmlmeinfo->HT_caps)), &(pattrib->pktlen)); ++ ++ } ++ } ++#endif ++ ++ //vendor specific IE, such as WPA, WMM, WPS ++ for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pmlmeinfo->network.IELength;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pmlmeinfo->network.IEs + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _VENDOR_SPECIFIC_IE_: ++ if ((_rtw_memcmp(pIE->data, RTW_WPA_OUI, 4)) || ++ (_rtw_memcmp(pIE->data, WMM_OUI, 4)) || ++ (_rtw_memcmp(pIE->data, WPS_OUI, 4))) ++ { ++ if(!padapter->registrypriv.wifi_spec) ++ { ++ //Commented by Kurt 20110629 ++ //In some older APs, WPS handshake ++ //would be fail if we append vender extensions informations to AP ++ if(_rtw_memcmp(pIE->data, WPS_OUI, 4)){ ++ pIE->Length=14; ++ } ++ } ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, pIE->Length, pIE->data, &(pattrib->pktlen)); ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ if (pmlmeinfo->assoc_AP_vendor == realtekAP) ++ { ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 6 , REALTEK_96B_IE, &(pattrib->pktlen)); ++ } ++ ++#ifdef CONFIG_P2P ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(pmlmepriv->p2p_assoc_req_ie && pmlmepriv->p2p_assoc_req_ie_len>0) ++ { ++ _rtw_memcpy(pframe, pmlmepriv->p2p_assoc_req_ie, pmlmepriv->p2p_assoc_req_ie_len); ++ pframe += pmlmepriv->p2p_assoc_req_ie_len; ++ pattrib->pktlen += pmlmepriv->p2p_assoc_req_ie_len; ++ } ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ { ++ // Should add the P2P IE in the association request frame. ++ // P2P OUI ++ ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20101109 ++ // According to the P2P Specification, the association request frame should contain 3 P2P attributes ++ // 1. P2P Capability ++ // 2. Extended Listen Timing ++ // 3. Device Info ++ // Commented by Albert 20110516 ++ // 4. P2P Interface ++ ++ // P2P Capability ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT; ++ else ++ p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT; ++ ++ // Extended Listen Timing ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 ); ++ p2pielen += 2; ++ ++ // Value: ++ // Availability Period ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ // Availability Interval ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ p2pielen += 2; ++ ++ // Device Info ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ if ( ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PEER_DISPLAY_PIN ) || ++ ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_SELF_DISPLAY_PIN ) ) ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY ); ++ } ++ else ++ { ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_PBC ); ++ } ++ ++ p2pielen += 2; ++ ++ // Primary Device Type ++ // Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ p2pielen += 2; ++ ++ // OUI ++ *(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ p2pielen += 2; ++ ++ // Number of Secondary Device Types ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ p2pielen += 2; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ // P2P Interface ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_INTERFACE; ++ ++ // Length: ++ *(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x000D ); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN ); // P2P Device Address ++ p2pielen += ETH_ALEN; ++ ++ p2pie[ p2pielen++ ] = 1; // P2P Interface Address Count ++ ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN ); // P2P Interface Address List ++ p2pielen += ETH_ALEN; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ //wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe); ++ //pframe += wfdielen; ++ //pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ } ++ } ++ ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_WFD ++#ifdef CONFIG_IOCTL_CFG80211 ++ if ( _TRUE == pwdinfo->wfd_info->wfd_enable ) ++#endif //CONFIG_IOCTL_CFG80211 ++ { ++ wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++#ifdef CONFIG_IOCTL_CFG80211 ++ else if (pmlmepriv->wfd_assoc_req_ie != NULL && pmlmepriv->wfd_assoc_req_ie_len>0) ++ { ++ //WFD IE ++ _rtw_memcpy(pframe, pmlmepriv->wfd_assoc_req_ie, pmlmepriv->wfd_assoc_req_ie_len); ++ pattrib->pktlen += pmlmepriv->wfd_assoc_req_ie_len; ++ pframe += pmlmepriv->wfd_assoc_req_ie_len; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ dump_mgntframe(padapter, pmgntframe); ++ ++ ret = _SUCCESS; ++ ++exit: ++ if (ret == _SUCCESS) ++ rtw_buf_update(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len, (u8 *)pwlanhdr, pattrib->pktlen); ++ else ++ rtw_buf_free(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len); ++ ++ return; ++} ++ ++//when wait_ack is ture, this function shoule be called at process context ++static int _issue_nulldata(_adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack) ++{ ++ int ret = _FAIL; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv; ++ struct mlme_ext_priv *pmlmeext; ++ struct mlme_ext_info *pmlmeinfo; ++ ++ //DBG_871X("%s:%d\n", __FUNCTION__, power_mode); ++ ++ if(!padapter) ++ goto exit; ++ ++ pxmitpriv = &(padapter->xmitpriv); ++ pmlmeext = &(padapter->mlmeextpriv); ++ pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ pattrib->retry_ctrl = _FALSE; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ SetFrDs(fctrl); ++ } ++ else if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) ++ { ++ SetToDs(fctrl); ++ } ++ ++ if (power_mode) ++ { ++ SetPwrMgt(fctrl); ++ } ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_DATA_NULL); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ if(wait_ack) ++ { ++ ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe); ++ } ++ else ++ { ++ dump_mgntframe(padapter, pmgntframe); ++ ret = _SUCCESS; ++ } ++ ++exit: ++ return ret; ++} ++ ++ ++//when wait_ms >0 , this function shoule be called at process context ++//da == NULL for station mode ++int issue_nulldata(_adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms) ++{ ++ int ret; ++ int i = 0; ++ u32 start = rtw_get_current_time(); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ /* da == NULL, assum it's null data for sta to ap*/ ++ if (da == NULL) ++ da = get_my_bssid(&(pmlmeinfo->network)); ++ ++ do ++ { ++ ret = _issue_nulldata(padapter, da, power_mode, wait_ms>0?_TRUE:_FALSE); ++ ++ i++; ++ ++ if (padapter->bDriverStopped || padapter->bSurpriseRemoved) ++ break; ++ ++ if(i < try_cnt && wait_ms > 0 && ret==_FAIL) ++ rtw_msleep_os(wait_ms); ++ ++ }while((ixmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ pattrib->hdrlen +=2; ++ pattrib->qos_en = _TRUE; ++ pattrib->eosp = 1; ++ pattrib->ack_policy = 0; ++ pattrib->mdata = 0; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ SetFrDs(fctrl); ++ } ++ else if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) ++ { ++ SetToDs(fctrl); ++ } ++ ++ if(pattrib->mdata) ++ SetMData(fctrl); ++ ++ qc = (unsigned short *)(pframe + pattrib->hdrlen - 2); ++ ++ SetPriority(qc, tid); ++ ++ SetEOSP(qc, pattrib->eosp); ++ ++ SetAckpolicy(qc, pattrib->ack_policy); ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_QOS_DATA_NULL); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr_qos); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr_qos); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ if(wait_ack) ++ { ++ ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe); ++ } ++ else ++ { ++ dump_mgntframe(padapter, pmgntframe); ++ ret = _SUCCESS; ++ } ++ ++exit: ++ return ret; ++} ++ ++//when wait_ms >0 , this function shoule be called at process context ++//da == NULL for station mode ++int issue_qos_nulldata(_adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms) ++{ ++ int ret; ++ int i = 0; ++ u32 start = rtw_get_current_time(); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ /* da == NULL, assum it's null data for sta to ap*/ ++ if (da == NULL) ++ da = get_my_bssid(&(pmlmeinfo->network)); ++ ++ do ++ { ++ ret = _issue_qos_nulldata(padapter, da, tid, wait_ms>0?_TRUE:_FALSE); ++ ++ i++; ++ ++ if (padapter->bDriverStopped || padapter->bSurpriseRemoved) ++ break; ++ ++ if(i < try_cnt && wait_ms > 0 && ret==_FAIL) ++ rtw_msleep_os(wait_ms); ++ ++ }while((ixmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ int ret = _FAIL; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ ++ //DBG_871X("%s to "MAC_FMT"\n", __func__, MAC_ARG(da)); ++ ++#ifdef CONFIG_P2P ++ if ( !( rtw_p2p_chk_state( pwdinfo, P2P_STATE_NONE ) ) && ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) ) ++ { ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey ); ++ _set_timer( &pwdinfo->reset_ch_sitesurvey, 10 ); ++ } ++#endif //CONFIG_P2P ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ pattrib->retry_ctrl = _FALSE; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_DEAUTH); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ reason = cpu_to_le16(reason); ++ pframe = rtw_set_fixed_ie(pframe, _RSON_CODE_ , (unsigned char *)&reason, &(pattrib->pktlen)); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ ++ if(wait_ack) ++ { ++ ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe); ++ } ++ else ++ { ++ dump_mgntframe(padapter, pmgntframe); ++ ret = _SUCCESS; ++ } ++ ++exit: ++ return ret; ++} ++ ++int issue_deauth(_adapter *padapter, unsigned char *da, unsigned short reason) ++{ ++ DBG_871X("%s to "MAC_FMT"\n", __func__, MAC_ARG(da)); ++ return _issue_deauth(padapter, da, reason, _FALSE); ++} ++ ++int issue_deauth_ex(_adapter *padapter, u8 *da, unsigned short reason, int try_cnt, ++ int wait_ms) ++{ ++ int ret; ++ int i = 0; ++ u32 start = rtw_get_current_time(); ++ ++ do ++ { ++ ret = _issue_deauth(padapter, da, reason, wait_ms>0?_TRUE:_FALSE); ++ ++ i++; ++ ++ if (padapter->bDriverStopped || padapter->bSurpriseRemoved) ++ break; ++ ++ if(i < try_cnt && wait_ms > 0 && ret==_FAIL) ++ rtw_msleep_os(wait_ms); ++ ++ }while((ixmitpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ ++ DBG_871X(FUNC_NDEV_FMT" ra="MAC_FMT", ch:%u, offset:%u\n", ++ FUNC_NDEV_ARG(padapter->pnetdev), MAC_ARG(ra), new_ch, ch_offset); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ return; ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, ra, ETH_ALEN); /* RA */ ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); /* TA */ ++ _rtw_memcpy(pwlanhdr->addr3, ra, ETH_ALEN); /* DA = RA */ ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ /* category, action */ ++ { ++ u8 category, action; ++ category = RTW_WLAN_CATEGORY_SPECTRUM_MGMT; ++ action = RTW_WLAN_ACTION_SPCT_CHL_SWITCH; ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ } ++ ++ pframe = rtw_set_ie_ch_switch(pframe, &(pattrib->pktlen), 0, new_ch, 0); ++ pframe = rtw_set_ie_secondary_ch_offset(pframe, &(pattrib->pktlen), ++ hal_ch_offset_to_secondary_ch_offset(ch_offset)); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++#ifdef CONFIG_IEEE80211W ++void issue_action_SA_Query(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short tid) ++{ ++ u8 category = RTW_WLAN_CATEGORY_SA_QUERY; ++ u16 reason_code; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ u8 *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ DBG_871X("%s: alloc_mgtxmitframe fail\n", __FUNCTION__); ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ if(raddr) ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ else ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &category, &pattrib->pktlen); ++ pframe = rtw_set_fixed_ie(pframe, 1, &action, &pattrib->pktlen); ++ ++ switch (action) ++ { ++ case 0: //SA Query req ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)&pmlmeext->sa_query_seq, &pattrib->pktlen); ++ pmlmeext->sa_query_seq++; ++ //send sa query request to AP, AP should reply sa query response in 1 second ++ set_sa_query_timer(pmlmeext, 1000); ++ break; ++ ++ case 1: //SA Query rsp ++ tid = cpu_to_le16(tid); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)&tid, &pattrib->pktlen); ++ break; ++ default: ++ break; ++ } ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++} ++#endif //CONFIG_IEEE80211W ++ ++void issue_action_BA(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short status) ++{ ++ u8 category = RTW_WLAN_CATEGORY_BACK; ++ u16 start_seq; ++ u16 BA_para_set; ++ u16 reason_code; ++ u16 BA_timeout_value; ++ u16 BA_starting_seqctrl; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ u8 *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ ++ ++ DBG_871X("%s, category=%d, action=%d, status=%d\n", __FUNCTION__, category, action, status); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ //_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ ++ status = cpu_to_le16(status); ++ ++ ++ if (category == 3) ++ { ++ switch (action) ++ { ++ case 0: //ADDBA req ++ do { ++ pmlmeinfo->dialogToken++; ++ } while (pmlmeinfo->dialogToken == 0); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(pmlmeinfo->dialogToken), &(pattrib->pktlen)); ++ ++ BA_para_set = (0x1002 | ((status & 0xf) << 2)); //immediate ack & 64 buffer size ++ //sys_mib.BA_para_set = 0x0802; //immediate ack & 32 buffer size ++ BA_para_set = cpu_to_le16(BA_para_set); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen)); ++ ++ //BA_timeout_value = 0xffff;//max: 65535 TUs(~ 65 ms) ++ BA_timeout_value = 5000;//~ 5ms ++ BA_timeout_value = cpu_to_le16(BA_timeout_value); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_timeout_value)), &(pattrib->pktlen)); ++ ++ //if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL) ++ if ((psta = rtw_get_stainfo(pstapriv, raddr)) != NULL) ++ { ++ start_seq = (psta->sta_xmitpriv.txseq_tid[status & 0x07]&0xfff) + 1; ++ ++ DBG_871X("BA_starting_seqctrl = %d for TID=%d\n", start_seq, status & 0x07); ++ ++ psta->BA_starting_seqctrl[status & 0x07] = start_seq; ++ ++ BA_starting_seqctrl = start_seq << 4; ++ } ++ ++ BA_starting_seqctrl = cpu_to_le16(BA_starting_seqctrl); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_starting_seqctrl)), &(pattrib->pktlen)); ++ break; ++ ++ case 1: //ADDBA rsp ++ pframe = rtw_set_fixed_ie(pframe, 1, &(pmlmeinfo->ADDBA_req.dialog_token), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&status), &(pattrib->pktlen)); ++ ++ //BA_para_set = cpu_to_le16((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); //64 buffer size ++ BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); //64 buffer size ++ ++ if(pregpriv->ampdu_amsdu==0)//disabled ++ BA_para_set = cpu_to_le16(BA_para_set & ~BIT(0)); ++ else if(pregpriv->ampdu_amsdu==1)//enabled ++ BA_para_set = cpu_to_le16(BA_para_set | BIT(0)); ++ else //auto ++ BA_para_set = cpu_to_le16(BA_para_set); ++ ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(pmlmeinfo->ADDBA_req.BA_timeout_value)), &(pattrib->pktlen)); ++ break; ++ case 2://DELBA ++ BA_para_set = (status & 0x1F) << 3; ++ BA_para_set = cpu_to_le16(BA_para_set); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen)); ++ ++ reason_code = 37;//Requested from peer STA as it does not want to use the mechanism ++ reason_code = cpu_to_le16(reason_code); ++ pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(reason_code)), &(pattrib->pktlen)); ++ break; ++ default: ++ break; ++ } ++ } ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++} ++ ++static void issue_action_BSSCoexistPacket(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ unsigned char category, action; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct wlan_network *pnetwork = NULL; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ u8 InfoContent[16] = {0}; ++ u8 ICS[8][15]; ++ ++ if((pmlmepriv->num_FortyMHzIntolerant==0) || (pmlmepriv->num_sta_no_ht==0)) ++ return; ++ ++ if(_TRUE == pmlmeinfo->bwmode_updated) ++ return; ++ ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ ++ category = RTW_WLAN_CATEGORY_PUBLIC; ++ action = ACT_PUBLIC_BSSCOEXIST; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ ++ ++ // ++ if(pmlmepriv->num_FortyMHzIntolerant>0) ++ { ++ u8 iedata=0; ++ ++ iedata |= BIT(2);//20 MHz BSS Width Request ++ ++ pframe = rtw_set_ie(pframe, EID_BSSCoexistence, 1, &iedata, &(pattrib->pktlen)); ++ ++ } ++ ++ ++ // ++ _rtw_memset(ICS, 0, sizeof(ICS)); ++ if(pmlmepriv->num_sta_no_ht>0) ++ { ++ int i; ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ int len; ++ u8 *p; ++ WLAN_BSSID_EX *pbss_network; ++ ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ plist = get_next(plist); ++ ++ pbss_network = (WLAN_BSSID_EX *)&pnetwork->network; ++ ++ p = rtw_get_ie(pbss_network->IEs + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, pbss_network->IELength - _FIXED_IE_LENGTH_); ++ if((p==NULL) || (len==0))//non-HT ++ { ++ if((pbss_network->Configuration.DSConfig<=0) || (pbss_network->Configuration.DSConfig>14)) ++ continue; ++ ++ ICS[0][pbss_network->Configuration.DSConfig]=1; ++ ++ if(ICS[0][0] == 0) ++ ICS[0][0] = 1; ++ } ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ ++ for(i= 0;i<8;i++) ++ { ++ if(ICS[i][0] == 1) ++ { ++ int j, k = 0; ++ ++ InfoContent[k] = i; ++ //SET_BSS_INTOLERANT_ELE_REG_CLASS(InfoContent,i); ++ k++; ++ ++ for(j=1;j<=14;j++) ++ { ++ if(ICS[i][j]==1) ++ { ++ if(k<16) ++ { ++ InfoContent[k] = j; //channel number ++ //SET_BSS_INTOLERANT_ELE_CHANNEL(InfoContent+k, j); ++ k++; ++ } ++ } ++ } ++ ++ pframe = rtw_set_ie(pframe, EID_BSSIntolerantChlReport, k, InfoContent, &(pattrib->pktlen)); ++ ++ } ++ ++ } ++ ++ ++ } ++ ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++unsigned int send_delba(_adapter *padapter, u8 initiator, u8 *addr) ++{ ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta = NULL; ++ //struct recv_reorder_ctrl *preorder_ctrl; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u16 tid; ++ ++ if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE) ++ if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) ++ return _SUCCESS; ++ ++ psta = rtw_get_stainfo(pstapriv, addr); ++ if(psta==NULL) ++ return _SUCCESS; ++ ++ //DBG_871X("%s:%s\n", __FUNCTION__, (initiator==0)?"RX_DIR":"TX_DIR"); ++ ++ if(initiator==0) // recipient ++ { ++ for(tid = 0;tidrecvreorder_ctrl[tid].enable == _TRUE) ++ { ++ DBG_871X("rx agg disable tid(%d)\n",tid); ++ issue_action_BA(padapter, addr, RTW_WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F)); ++ psta->recvreorder_ctrl[tid].enable = _FALSE; ++ psta->recvreorder_ctrl[tid].indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__, ++ psta->recvreorder_ctrl[tid].indicate_seq); ++ #endif ++ } ++ } ++ } ++ else if(initiator == 1)// originator ++ { ++ //DBG_871X("tx agg_enable_bitmap(0x%08x)\n", psta->htpriv.agg_enable_bitmap); ++ for(tid = 0;tidhtpriv.agg_enable_bitmap & BIT(tid)) ++ { ++ DBG_871X("tx agg disable tid(%d)\n",tid); ++ issue_action_BA(padapter, addr, RTW_WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F) ); ++ psta->htpriv.agg_enable_bitmap &= ~BIT(tid); ++ psta->htpriv.candidate_tid_bitmap &= ~BIT(tid); ++ ++ } ++ } ++ } ++ ++ return _SUCCESS; ++ ++} ++ ++unsigned int send_beacon(_adapter *padapter) ++{ ++ u8 bxmitok = _FALSE; ++ int issue=0; ++ int poll = 0; ++//#ifdef CONFIG_CONCURRENT_MODE ++ //struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ //struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ //_adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ //struct mlme_priv *pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++//#endif ++ ++#ifdef CONFIG_PCI_HCI ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ issue_beacon(padapter); ++ ++ return _SUCCESS; ++ ++#endif ++ ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) ++ u32 start = rtw_get_current_time(); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_BCN_VALID, NULL); ++ do{ ++ issue_beacon(padapter); ++ issue++; ++ do { ++ rtw_yield_os(); ++ rtw_hal_get_hwreg(padapter, HW_VAR_BCN_VALID, (u8 *)(&bxmitok)); ++ poll++; ++ }while((poll%10)!=0 && _FALSE == bxmitok && !padapter->bSurpriseRemoved && !padapter->bDriverStopped); ++ ++ }while(_FALSE == bxmitok && issue<100 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped); ++ ++ if(padapter->bSurpriseRemoved || padapter->bDriverStopped) ++ { ++ return _FAIL; ++ } ++ if(_FALSE == bxmitok) ++ { ++ DBG_871X("%s fail! %u ms\n", __FUNCTION__, rtw_get_passing_time_ms(start)); ++ return _FAIL; ++ } ++ else ++ { ++ u32 passing_time = rtw_get_passing_time_ms(start); ++ ++ if(passing_time > 100 || issue > 3) ++ DBG_871X("%s success, issue:%d, poll:%d, %u ms\n", __FUNCTION__, issue, poll, rtw_get_passing_time_ms(start)); ++ //else ++ // DBG_871X("%s success, issue:%d, poll:%d, %u ms\n", __FUNCTION__, issue, poll, rtw_get_passing_time_ms(start)); ++ ++ return _SUCCESS; ++ } ++ ++#endif ++ ++} ++ ++/**************************************************************************** ++ ++Following are some utitity fuctions for WiFi MLME ++ ++*****************************************************************************/ ++ ++BOOLEAN IsLegal5GChannel( ++ IN PADAPTER Adapter, ++ IN u8 channel) ++{ ++ ++ int i=0; ++ u8 Channel_5G[45] = {36,38,40,42,44,46,48,50,52,54,56,58, ++ 60,62,64,100,102,104,106,108,110,112,114,116,118,120,122, ++ 124,126,128,130,132,134,136,138,140,149,151,153,155,157,159, ++ 161,163,165}; ++ for(i=0;imlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u32 initialgain = 0; ++ u8 restore_initial_gain = 1; ++ ++#ifdef CONFIG_P2P ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ u8 stay_buddy_ch = 0; ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++#endif //CONFIG_CONCURRENT_MODE ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ static unsigned char prev_survey_channel = 0; ++ static unsigned int p2p_scan_count = 0; ++ ++ ++ if ( ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) || ( pwdinfo->p2p_info.scan_op_ch_only ) ) ++ { ++ if ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) ++ { ++ survey_channel = pwdinfo->rx_invitereq_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx]; ++ } ++ else ++ { ++ survey_channel = pwdinfo->p2p_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx]; ++ } ++ ScanType = SCAN_ACTIVE; ++ } ++ else if(rtw_p2p_findphase_ex_is_social(pwdinfo)) ++ { ++ // Commented by Albert 2011/06/03 ++ // The driver is in the find phase, it should go through the social channel. ++ int ch_set_idx; ++ survey_channel = pwdinfo->social_chan[pmlmeext->sitesurvey_res.channel_idx]; ++ ch_set_idx = rtw_ch_set_search_ch(pmlmeext->channel_set, survey_channel); ++ if (ch_set_idx >= 0) ++ ScanType = pmlmeext->channel_set[ch_set_idx].ScanType; ++ else ++ ScanType = SCAN_ACTIVE; ++ } ++ else ++#endif //CONFIG_P2P ++ { ++ struct rtw_ieee80211_channel *ch; ++ if (pmlmeext->sitesurvey_res.channel_idx < pmlmeext->sitesurvey_res.ch_num) { ++ ch = &pmlmeext->sitesurvey_res.ch[pmlmeext->sitesurvey_res.channel_idx]; ++ survey_channel = ch->hw_value; ++ ScanType = (ch->flags & RTW_IEEE80211_CHAN_PASSIVE_SCAN) ? SCAN_PASSIVE : SCAN_ACTIVE; ++ } ++ } ++ ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" ch:%u(cnt:%u,idx:%d) at %dms, %c%c%c\n" ++ , FUNC_ADPT_ARG(padapter) ++ , survey_channel ++ , pwdinfo->find_phase_state_exchange_cnt, pmlmeext->sitesurvey_res.channel_idx ++ , rtw_get_passing_time_ms(padapter->mlmepriv.scan_start_time) ++ , ScanType?'A':'P', pmlmeext->sitesurvey_res.scan_mode?'A':'P' ++ , pmlmeext->sitesurvey_res.ssid[0].SsidLength?'S':' ' ++ ); ++ ++ if(survey_channel != 0) ++ { ++ //PAUSE 4-AC Queue when site_survey ++ //rtw_hal_get_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); ++ //val8 |= 0x0f; ++ //rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); ++#ifdef CONFIG_CONCURRENT_MODE ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ if((padapter->pbuddy_adapter->mlmeextpriv.mlmext_info.state&0x03) == WIFI_FW_AP_STATE) ++ { ++ if( pmlmeinfo->scan_cnt == RTW_SCAN_NUM_OF_CH ) ++ { ++ pmlmeinfo->scan_cnt = 0; ++ survey_channel = pbuddy_mlmeext->cur_channel; ++ stay_buddy_ch = 1; ++ } ++ else ++ { ++ if( pmlmeinfo->scan_cnt == 0 ) ++ stay_buddy_ch = 2; ++ pmlmeinfo->scan_cnt++; ++ } ++ } ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++#endif //CONFIG_CONCURRENT_MODE ++ if(pmlmeext->sitesurvey_res.channel_idx == 0) ++ { ++ set_channel_bwmode(padapter, survey_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ else ++ { ++ SelectChannel(padapter, survey_channel); ++ } ++ ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ if( stay_buddy_ch == 1 ) ++ { ++ val8 = 0; //survey done ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ ++ if(check_buddy_mlmeinfo_state(padapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(padapter, _FW_LINKED)) ++ { ++ update_beacon(padapter->pbuddy_adapter, 0, NULL, _TRUE); ++ } ++ } ++ else if( stay_buddy_ch == 2 ) ++ { ++ val8 = 1; //under site survey ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ } ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ ++ if(ScanType == SCAN_ACTIVE) //obey the channel plan setting... ++ { ++ #ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || ++ rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH) ++ ) ++ { ++ issue_probereq_p2p(padapter, NULL); ++ issue_probereq_p2p(padapter, NULL); ++ issue_probereq_p2p(padapter, NULL); ++ } ++ else ++ #endif //CONFIG_P2P ++ { ++ int i; ++ for(i=0;isitesurvey_res.ssid[i].SsidLength) { ++ //todo: to issue two probe req??? ++ issue_probereq(padapter, &(pmlmeext->sitesurvey_res.ssid[i]), NULL); ++ //rtw_msleep_os(SURVEY_TO>>1); ++ issue_probereq(padapter, &(pmlmeext->sitesurvey_res.ssid[i]), NULL); ++ } else { ++ break; ++ } ++ } ++ ++ if(pmlmeext->sitesurvey_res.scan_mode == SCAN_ACTIVE) { ++ //todo: to issue two probe req??? ++ issue_probereq(padapter, NULL, NULL); ++ //rtw_msleep_os(SURVEY_TO>>1); ++ issue_probereq(padapter, NULL, NULL); ++ } ++ } ++ } ++ ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ if( stay_buddy_ch == 1 ) ++ set_survey_timer(pmlmeext, pmlmeext->chan_scan_time * RTW_STAY_AP_CH_MILLISECOND ); ++ else ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ set_survey_timer(pmlmeext, pmlmeext->chan_scan_time); ++ ++ } ++ else ++ { ++ ++ // channel number is 0 or this channel is not valid. ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ u8 cur_channel; ++ u8 cur_bwmode; ++ u8 cur_ch_offset; ++ ++ if (rtw_get_ch_setting_union(padapter, &cur_channel, &cur_bwmode, &cur_ch_offset) != 0) ++ { ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" back to linked union - ch:%u, bw:%u, offset:%u\n", ++ FUNC_ADPT_ARG(padapter), cur_channel, cur_bwmode, cur_ch_offset); ++ } ++ #ifdef CONFIG_IOCTL_CFG80211 ++ else if(padapter->pbuddy_adapter ++ && pbuddy_adapter->wdinfo.driver_interface == DRIVER_CFG80211 ++ && wdev_to_priv(pbuddy_adapter->rtw_wdev)->p2p_enabled ++ && rtw_p2p_chk_state(&pbuddy_adapter->wdinfo, P2P_STATE_LISTEN) ++ ) ++ { ++ cur_channel = pbuddy_adapter->wdinfo.listen_channel; ++ cur_bwmode = pbuddy_mlmeext->cur_bwmode; ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ } ++ #endif ++ else ++ { ++ cur_channel = pmlmeext->cur_channel; ++ cur_bwmode = pmlmeext->cur_bwmode; ++ cur_ch_offset = pmlmeext->cur_ch_offset; ++ } ++#endif ++ ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH)) ++ { ++ if( ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) || ( pwdinfo->p2p_info.scan_op_ch_only ) ) ++ { ++ // Set the find_phase_state_exchange_cnt to P2P_FINDPHASE_EX_CNT. ++ // This will let the following flow to run the scanning end. ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX); ++ } ++ #ifdef CONFIG_DBG_P2P ++ DBG_871X( "[%s] find phase exchange cnt = %d\n", __FUNCTION__, pwdinfo->find_phase_state_exchange_cnt ); ++ #endif ++ } ++ ++ if(rtw_p2p_findphase_ex_is_needed(pwdinfo)) ++ { ++ // Set the P2P State to the listen state of find phase and set the current channel to the listen channel ++ set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_LISTEN); ++ pmlmeext->sitesurvey_res.state = SCAN_DISABLE; ++ ++ //turn on dynamic functions ++ Restore_DM_Func_Flag(padapter); ++ //Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE); ++ ++ _set_timer( &pwdinfo->find_phase_timer, ( u32 ) ( ( u32 ) ( pwdinfo->listen_dwell ) * 100 ) ); ++ } ++ else ++#endif //CONFIG_P2P ++ { ++ ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ pmlmeinfo->scan_cnt = 0; ++#endif //CONFIG_DMP_STA_NODE_SCAN_UNDER_AP_MODE ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ // 20100721:Interrupt scan operation here. ++ // For SW antenna diversity before link, it needs to switch to another antenna and scan again. ++ // It compares the scan result and select beter one to do connection. ++ if(rtw_hal_antdiv_before_linked(padapter)) ++ { ++ pmlmeext->sitesurvey_res.bss_cnt = 0; ++ pmlmeext->sitesurvey_res.channel_idx = -1; ++ pmlmeext->chan_scan_time = SURVEY_TO /2; ++ set_survey_timer(pmlmeext, pmlmeext->chan_scan_time); ++ return; ++ } ++#endif ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH)) ++ { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if( pwdinfo->driver_interface == DRIVER_WEXT ) ++ { ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _set_timer( &pwdinfo->ap_p2p_switch_timer, 500 ); ++ } ++ } ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ #else ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ #endif ++ } ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE); ++#endif //CONFIG_P2P ++ ++ pmlmeext->sitesurvey_res.state = SCAN_COMPLETE; ++ ++ //switch back to the original channel ++ //SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset); ++ ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++#else ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_set_channel_bwmode_survey_done(padapter); ++#else ++ if( pwdinfo->driver_interface == DRIVER_WEXT ) ++ { ++ if( rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN) ) ++ { ++ set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ else ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++ else if( pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++#endif //CONFIG_DUALMAC_CONCURRENT ++#endif //CONFIG_CONCURRENT_MODE ++ } ++ ++ //flush 4-AC Queue after site_survey ++ //val8 = 0; ++ //rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8)); ++ ++ val8 = 0; //survey done ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ ++ //config MSR ++ Set_MSR(padapter, (pmlmeinfo->state & 0x3)); ++ ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if((wdev_to_priv(padapter->rtw_wdev))->p2p_enabled == _TRUE) ++ { ++ restore_initial_gain = 0; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ if(restore_initial_gain == 1) ++ { ++ initialgain = 0xff; //restore RX GAIN ++ rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ } ++ ++ //turn on dynamic functions ++ Restore_DM_Func_Flag(padapter); ++ //Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE); ++ ++ if (is_client_associated_to_ap(padapter) == _TRUE) ++ { ++ issue_nulldata(padapter, NULL, 0, 3, 500); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE) ++ { ++ DBG_871X("adapter is surveydone(buddy_adapter is linked), issue nulldata(pwrbit=0)\n"); ++ ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 0, 3, 500); ++ } ++#endif ++ } ++#ifdef CONFIG_CONCURRENT_MODE ++ else if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE) ++ { ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 0, 3, 500); ++ } ++#endif ++ ++ report_surveydone_event(padapter); ++ ++ pmlmeext->chan_scan_time = SURVEY_TO; ++ pmlmeext->sitesurvey_res.state = SCAN_DISABLE; ++ ++ issue_action_BSSCoexistPacket(padapter); ++ issue_action_BSSCoexistPacket(padapter); ++ issue_action_BSSCoexistPacket(padapter); ++ ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_mlmeinfo_state(padapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(padapter, _FW_LINKED)) ++ { ++ ++ DBG_871X("survey done, current CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ DBG_871X("restart pbuddy_adapter's beacon\n"); ++ ++ update_beacon(padapter->pbuddy_adapter, 0, NULL, _TRUE); ++ } ++#endif ++ ++ } ++ ++ return; ++ ++} ++ ++//collect bss info from Beacon and Probe response frames. ++u8 collect_bss_info(_adapter *padapter, union recv_frame *precv_frame, WLAN_BSSID_EX *bssid) ++{ ++ int i; ++ u32 len; ++ u8 *p; ++ u16 val16, subtype; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ u32 packet_len = precv_frame->u.hdr.len; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ len = packet_len - sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ if (len > MAX_IE_SZ) ++ { ++ //DBG_871X("IE too long for survey event\n"); ++ return _FAIL; ++ } ++ ++ _rtw_memset(bssid, 0, sizeof(WLAN_BSSID_EX)); ++ ++ subtype = GetFrameSubType(pframe); ++ ++ if(subtype==WIFI_BEACON) ++ bssid->Reserved[0] = 1; ++ else ++ bssid->Reserved[0] = 0; ++ ++ bssid->Length = sizeof(WLAN_BSSID_EX) - MAX_IE_SZ + len; ++ ++ //below is to copy the information element ++ bssid->IELength = len; ++ _rtw_memcpy(bssid->IEs, (pframe + sizeof(struct rtw_ieee80211_hdr_3addr)), bssid->IELength); ++ ++ //get the signal strength ++ bssid->PhyInfo.SignalQuality = precv_frame->u.hdr.attrib.signal_qual;//in percentage ++ bssid->PhyInfo.SignalStrength = precv_frame->u.hdr.attrib.signal_strength;//in percentage ++ bssid->Rssi = precv_frame->u.hdr.attrib.RecvSignalPower; // in dBM.raw data ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ //rtw_hal_get_hwreg(padapter, HW_VAR_CURRENT_ANTENNA, (u8 *)(&bssid->PhyInfo.Optimum_antenna)); ++ rtw_hal_get_def_var(padapter, HAL_DEF_CURRENT_ANTENNA, &bssid->PhyInfo.Optimum_antenna); ++#endif ++ ++ // checking SSID ++ if ((p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SSID_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_)) == NULL) ++ { ++ DBG_871X("marc: cannot find SSID for survey event\n"); ++ return _FAIL; ++ } ++ ++ if (*(p + 1)) ++ { ++ if (len > NDIS_802_11_LENGTH_SSID) ++ { ++ DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len); ++ return _FAIL; ++ } ++ _rtw_memcpy(bssid->Ssid.Ssid, (p + 2), *(p + 1)); ++ bssid->Ssid.SsidLength = *(p + 1); ++ } ++ else ++ { ++ bssid->Ssid.SsidLength = 0; ++ } ++ ++ _rtw_memset(bssid->SupportedRates, 0, NDIS_802_11_LENGTH_RATES_EX); ++ ++ //checking rate info... ++ i = 0; ++ p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SUPPORTEDRATES_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ if (p != NULL) ++ { ++ if (len > NDIS_802_11_LENGTH_RATES_EX) ++ { ++ DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len); ++ return _FAIL; ++ } ++ _rtw_memcpy(bssid->SupportedRates, (p + 2), len); ++ i = len; ++ } ++ ++ p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _EXT_SUPPORTEDRATES_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ if (p != NULL) ++ { ++ if (len > (NDIS_802_11_LENGTH_RATES_EX-i)) ++ { ++ DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len); ++ return _FAIL; ++ } ++ _rtw_memcpy(bssid->SupportedRates + i, (p + 2), len); ++ } ++ ++ //todo: ++#if 0 ++ if (judge_network_type(bssid->SupportedRates, (len + i)) == WIRELESS_11B) ++ { ++ bssid->NetworkTypeInUse = Ndis802_11DS; ++ } ++ else ++#endif ++ { ++ bssid->NetworkTypeInUse = Ndis802_11OFDM24; ++ } ++ ++ if (bssid->IELength < 12) ++ return _FAIL; ++ ++ // Checking for DSConfig ++ p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _DSSET_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ ++ bssid->Configuration.DSConfig = 0; ++ bssid->Configuration.Length = 0; ++ ++ if (p) ++ { ++ bssid->Configuration.DSConfig = *(p + 2); ++ } ++ else ++ {// In 5G, some ap do not have DSSET IE ++ // checking HT info for channel ++ p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _HT_ADD_INFO_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ if(p) ++ { ++ struct HT_info_element *HT_info = (struct HT_info_element *)(p + 2); ++ bssid->Configuration.DSConfig = HT_info->primary_channel; ++ } ++ else ++ { // use current channel ++ bssid->Configuration.DSConfig = rtw_get_oper_ch(padapter); ++ } ++ } ++ ++ _rtw_memcpy(&bssid->Configuration.BeaconPeriod, rtw_get_beacon_interval_from_ie(bssid->IEs), 2); ++ bssid->Configuration.BeaconPeriod = le32_to_cpu(bssid->Configuration.BeaconPeriod); ++ ++ val16 = rtw_get_capability((WLAN_BSSID_EX *)bssid); ++ ++ if (val16 & BIT(0)) ++ { ++ bssid->InfrastructureMode = Ndis802_11Infrastructure; ++ _rtw_memcpy(bssid->MacAddress, GetAddr2Ptr(pframe), ETH_ALEN); ++ } ++ else ++ { ++ bssid->InfrastructureMode = Ndis802_11IBSS; ++ _rtw_memcpy(bssid->MacAddress, GetAddr3Ptr(pframe), ETH_ALEN); ++ } ++ ++ if (val16 & BIT(4)) ++ bssid->Privacy = 1; ++ else ++ bssid->Privacy = 0; ++ ++ bssid->Configuration.ATIMWindow = 0; ++ ++ //20/40 BSS Coexistence check ++ if((pregistrypriv->wifi_spec==1) && (_FALSE == pmlmeinfo->bwmode_updated)) ++ { ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ if(p && len>0) ++ { ++ struct HT_caps_element *pHT_caps; ++ pHT_caps = (struct HT_caps_element *)(p + 2); ++ ++ if(pHT_caps->u.HT_cap_element.HT_caps_info&BIT(14)) ++ { ++ pmlmepriv->num_FortyMHzIntolerant++; ++ } ++ } ++ else ++ { ++ pmlmepriv->num_sta_no_ht++; ++ } ++ ++ } ++ ++#ifdef CONFIG_INTEL_WIDI ++ //process_intel_widi_query_or_tigger(padapter, bssid); ++ if(process_intel_widi_query_or_tigger(padapter, bssid)) ++ { ++ return _FAIL; ++ } ++#endif // CONFIG_INTEL_WIDI ++ ++ #if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) & 1 ++ if(strcmp(bssid->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) { ++ DBG_871X("Receiving %s("MAC_FMT", DSConfig:%u) from ch%u with ss:%3u, sq:%3u, RawRSSI:%3ld\n" ++ , bssid->Ssid.Ssid, MAC_ARG(bssid->MacAddress), bssid->Configuration.DSConfig ++ , rtw_get_oper_ch(padapter) ++ , bssid->PhyInfo.SignalStrength, bssid->PhyInfo.SignalQuality, bssid->Rssi ++ ); ++ } ++ #endif ++ ++ // mark bss info receving from nearby channel as SignalQuality 101 ++ if(bssid->Configuration.DSConfig != rtw_get_oper_ch(padapter)) ++ { ++ bssid->PhyInfo.SignalQuality= 101; ++ } ++ ++ return _SUCCESS; ++} ++ ++void start_create_ibss(_adapter* padapter) ++{ ++ unsigned short caps; ++ u8 val8; ++ u8 join_type; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++ pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig; ++ pmlmeinfo->bcn_interval = get_beacon_interval(pnetwork); ++ ++ //update wireless mode ++ update_wireless_mode(padapter); ++ ++ //udpate capability ++ caps = rtw_get_capability((WLAN_BSSID_EX *)pnetwork); ++ update_capinfo(padapter, caps); ++ if(caps&cap_IBSS)//adhoc master ++ { ++ //set_opmode_cmd(padapter, adhoc);//removed ++ ++ val8 = 0xcf; ++ rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); ++ ++ //switch channel ++ //SelectChannel(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE); ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ ++ beacon_timing_control(padapter); ++ ++ //set msr to WIFI_FW_ADHOC_STATE ++ pmlmeinfo->state = WIFI_FW_ADHOC_STATE; ++ Set_MSR(padapter, (pmlmeinfo->state & 0x3)); ++ ++ //issue beacon ++ if(send_beacon(padapter)==_FAIL) ++ { ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("issuing beacon frame fail....\n")); ++ ++ report_join_res(padapter, -1); ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ } ++ else ++ { ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, padapter->registrypriv.dev_network.MacAddress); ++ join_type = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ ++ report_join_res(padapter, 1); ++ pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; ++ } ++ } ++ else ++ { ++ DBG_871X("start_create_ibss, invalid cap:%x\n", caps); ++ return; ++ } ++ ++} ++ ++void start_clnt_join(_adapter* padapter) ++{ ++ unsigned short caps; ++ u8 val8; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++ ++ //update wireless mode ++ update_wireless_mode(padapter); ++ ++ //udpate capability ++ caps = rtw_get_capability((WLAN_BSSID_EX *)pnetwork); ++ update_capinfo(padapter, caps); ++ if (caps&cap_ESS) ++ { ++ Set_MSR(padapter, WIFI_FW_STATION_STATE); ++ ++ val8 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X)? 0xcc: 0xcf; ++ rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); ++ ++ #ifdef CONFIG_DEAUTH_BEFORE_CONNECT ++ // Because of AP's not receiving deauth before ++ // AP may: 1)not response auth or 2)deauth us after link is complete ++ // issue deauth before issuing auth to deal with the situation ++ ++ // Commented by Albert 2012/07/21 ++ // For the Win8 P2P connection, it will be hard to have a successful connection if this Wi-Fi doesn't connect to it. ++ { ++ #ifdef CONFIG_P2P ++ _queue *queue = &(padapter->mlmepriv.scanned_queue); ++ _list *head = get_list_head(queue); ++ _list *pos = get_next(head); ++ struct wlan_network *scanned = NULL; ++ u8 ie_offset = 0; ++ _irqL irqL; ++ bool has_p2p_ie = _FALSE; ++ ++ _enter_critical_bh(&(padapter->mlmepriv.scanned_queue.lock), &irqL); ++ ++ for (pos = get_next(head);!rtw_end_of_queue_search(head, pos); pos = get_next(pos)) { ++ ++ scanned = LIST_CONTAINOR(pos, struct wlan_network, list); ++ if(scanned==NULL) ++ rtw_warn_on(1); ++ ++ if (_rtw_memcmp(&(scanned->network.Ssid), &(pnetwork->Ssid), sizeof(NDIS_802_11_SSID)) == _TRUE ++ && _rtw_memcmp(scanned->network.MacAddress, pnetwork->MacAddress, sizeof(NDIS_802_11_MAC_ADDRESS)) == _TRUE ++ ) { ++ ie_offset = (scanned->network.Reserved[0] == 2? 0:12); ++ if (rtw_get_p2p_ie(scanned->network.IEs+ie_offset, scanned->network.IELength-ie_offset, NULL, NULL)) ++ has_p2p_ie = _TRUE; ++ break; ++ } ++ } ++ ++ _exit_critical_bh(&(padapter->mlmepriv.scanned_queue.lock), &irqL); ++ ++ if (scanned == NULL || rtw_end_of_queue_search(head, pos) || has_p2p_ie == _FALSE) ++ #endif /* CONFIG_P2P */ ++ issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, 5, 100); ++ } ++ #endif /* CONFIG_DEAUTH_BEFORE_CONNECT */ ++ ++ //here wait for receiving the beacon to start auth ++ //and enable a timer ++ set_link_timer(pmlmeext, decide_wait_for_beacon_timeout(pmlmeinfo->bcn_interval)); ++ ++ pmlmeinfo->state = WIFI_FW_AUTH_NULL | WIFI_FW_STATION_STATE; ++ } ++ else if (caps&cap_IBSS) //adhoc client ++ { ++ Set_MSR(padapter, WIFI_FW_ADHOC_STATE); ++ ++ val8 = 0xcf; ++ rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); ++ ++ //switch channel ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++ beacon_timing_control(padapter); ++ ++ pmlmeinfo->state = WIFI_FW_ADHOC_STATE; ++ ++ report_join_res(padapter, 1); ++ } ++ else ++ { ++ //DBG_871X("marc: invalid cap:%x\n", caps); ++ return; ++ } ++ ++} ++ ++void start_clnt_auth(_adapter* padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ pmlmeinfo->state &= (~WIFI_FW_AUTH_NULL); ++ pmlmeinfo->state |= WIFI_FW_AUTH_STATE; ++ ++ pmlmeinfo->auth_seq = 1; ++ pmlmeinfo->reauth_count = 0; ++ pmlmeinfo->reassoc_count = 0; ++ pmlmeinfo->link_count = 0; ++ pmlmeext->retry = 0; ++ ++ ++ issue_auth(padapter, NULL, 0); ++ ++ set_link_timer(pmlmeext, REAUTH_TO); ++ ++} ++ ++ ++void start_clnt_assoc(_adapter* padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ pmlmeinfo->state &= (~(WIFI_FW_AUTH_NULL | WIFI_FW_AUTH_STATE)); ++ pmlmeinfo->state |= (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE); ++ ++ issue_assocreq(padapter); ++ ++ set_link_timer(pmlmeext, REASSOC_TO); ++} ++ ++unsigned int receive_disconnect(_adapter *padapter, unsigned char *MacAddr, unsigned short reason) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //check A3 ++ if (!(_rtw_memcmp(MacAddr, get_my_bssid(&pmlmeinfo->network), ETH_ALEN))) ++ return _SUCCESS; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) ++ { ++ if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) ++ { ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ report_del_sta_event(padapter, MacAddr, reason); ++ ++ } ++ else if (pmlmeinfo->state & WIFI_FW_LINKING_STATE) ++ { ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ report_join_res(padapter, -2); ++ } ++ } ++ ++ return _SUCCESS; ++} ++ ++#ifdef CONFIG_80211D ++static void process_80211d(PADAPTER padapter, WLAN_BSSID_EX *bssid) ++{ ++ struct registry_priv *pregistrypriv; ++ struct mlme_ext_priv *pmlmeext; ++ RT_CHANNEL_INFO *chplan_new; ++ u8 channel; ++ u8 i; ++ ++ ++ pregistrypriv = &padapter->registrypriv; ++ pmlmeext = &padapter->mlmeextpriv; ++ ++ // Adjust channel plan by AP Country IE ++ if (pregistrypriv->enable80211d && ++ (!pmlmeext->update_channel_plan_by_ap_done)) ++ { ++ u8 *ie, *p; ++ u32 len; ++ RT_CHANNEL_PLAN chplan_ap; ++ RT_CHANNEL_INFO chplan_sta[MAX_CHANNEL_NUM]; ++ u8 country[4]; ++ u8 fcn; // first channel number ++ u8 noc; // number of channel ++ u8 j, k; ++ ++ ie = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _COUNTRY_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_); ++ if (!ie) return; ++ if (len < 6) return; ++ ++ ie += 2; ++ p = ie; ++ ie += len; ++ ++ _rtw_memset(country, 0, 4); ++ _rtw_memcpy(country, p, 3); ++ p += 3; ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ++ ("%s: 802.11d country=%s\n", __FUNCTION__, country)); ++ ++ i = 0; ++ while ((ie - p) >= 3) ++ { ++ fcn = *(p++); ++ noc = *(p++); ++ p++; ++ ++ for (j = 0; j < noc; j++) ++ { ++ if (fcn <= 14) channel = fcn + j; // 2.4 GHz ++ else channel = fcn + j*4; // 5 GHz ++ ++ chplan_ap.Channel[i++] = channel; ++ } ++ } ++ chplan_ap.Len = i; ++ ++#ifdef CONFIG_DEBUG_RTL871X ++#ifdef PLATFORM_LINUX ++ i = 0; ++ printk("%s: AP[%s] channel plan {", __func__, bssid->Ssid.Ssid); ++ while ((i < chplan_ap.Len) && (chplan_ap.Channel[i] != 0)) ++ { ++ printk("%02d,", chplan_ap.Channel[i]); ++ i++; ++ } ++ printk("}\n"); ++#endif ++#endif ++ ++ _rtw_memcpy(chplan_sta, pmlmeext->channel_set, sizeof(chplan_sta)); ++#ifdef CONFIG_DEBUG_RTL871X ++#ifdef PLATFORM_LINUX ++ i = 0; ++ printk("%s: STA channel plan {", __func__); ++ while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0)) ++ { ++ printk("%02d(%c),", chplan_sta[i].ChannelNum, chplan_sta[i].ScanType==SCAN_PASSIVE?'p':'a'); ++ i++; ++ } ++ printk("}\n"); ++#endif ++#endif ++ ++ _rtw_memset(pmlmeext->channel_set, 0, sizeof(pmlmeext->channel_set)); ++ chplan_new = pmlmeext->channel_set; ++ ++ i = j = k = 0; ++ if (pregistrypriv->wireless_mode & WIRELESS_11G) ++ { ++ do { ++ if ((i == MAX_CHANNEL_NUM) || ++ (chplan_sta[i].ChannelNum == 0) || ++ (chplan_sta[i].ChannelNum > 14)) ++ break; ++ ++ if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] > 14)) ++ break; ++ ++ if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ i++; ++ j++; ++ k++; ++ } ++ else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++// chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ chplan_new[k].ScanType = SCAN_PASSIVE; ++ i++; ++ k++; ++ } ++ else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ j++; ++ k++; ++ } ++ } while (1); ++ ++ // change AP not support channel to Passive scan ++ while ((i < MAX_CHANNEL_NUM) && ++ (chplan_sta[i].ChannelNum != 0) && ++ (chplan_sta[i].ChannelNum <= 14)) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++// chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ chplan_new[k].ScanType = SCAN_PASSIVE; ++ i++; ++ k++; ++ } ++ ++ // add channel AP supported ++ while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14)) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ j++; ++ k++; ++ } ++ } ++ else ++ { ++ // keep original STA 2.4G channel plan ++ while ((i < MAX_CHANNEL_NUM) && ++ (chplan_sta[i].ChannelNum != 0) && ++ (chplan_sta[i].ChannelNum <= 14)) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++ chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ i++; ++ k++; ++ } ++ ++ // skip AP 2.4G channel plan ++ while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14)) ++ { ++ j++; ++ } ++ } ++ ++ if (pregistrypriv->wireless_mode & WIRELESS_11A) ++ { ++ do { ++ if ((i == MAX_CHANNEL_NUM) || ++ (chplan_sta[i].ChannelNum == 0)) ++ break; ++ ++ if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] == 0)) ++ break; ++ ++ if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ i++; ++ j++; ++ k++; ++ } ++ else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++// chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ chplan_new[k].ScanType = SCAN_PASSIVE; ++ i++; ++ k++; ++ } ++ else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j]) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ j++; ++ k++; ++ } ++ } while (1); ++ ++ // change AP not support channel to Passive scan ++ while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0)) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++// chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ chplan_new[k].ScanType = SCAN_PASSIVE; ++ i++; ++ k++; ++ } ++ ++ // add channel AP supported ++ while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] != 0)) ++ { ++ chplan_new[k].ChannelNum = chplan_ap.Channel[j]; ++ chplan_new[k].ScanType = SCAN_ACTIVE; ++ j++; ++ k++; ++ } ++ } ++ else ++ { ++ // keep original STA 5G channel plan ++ while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0)) ++ { ++ chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum; ++ chplan_new[k].ScanType = chplan_sta[i].ScanType; ++ i++; ++ k++; ++ } ++ } ++ ++ pmlmeext->update_channel_plan_by_ap_done = 1; ++ ++#ifdef CONFIG_DEBUG_RTL871X ++#ifdef PLATFORM_LINUX ++ k = 0; ++ printk("%s: new STA channel plan {", __func__); ++ while ((k < MAX_CHANNEL_NUM) && (chplan_new[k].ChannelNum != 0)) ++ { ++ printk("%02d(%c),", chplan_new[k].ChannelNum, chplan_new[k].ScanType==SCAN_PASSIVE?'p':'c'); ++ k++; ++ } ++ printk("}\n"); ++#endif ++#endif ++ ++#if 0 ++ // recover the right channel index ++ channel = chplan_sta[pmlmeext->sitesurvey_res.channel_idx].ChannelNum; ++ k = 0; ++ while ((k < MAX_CHANNEL_NUM) && (chplan_new[k].ChannelNum != 0)) ++ { ++ if (chplan_new[k].ChannelNum == channel) { ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ++ ("%s: change mlme_ext sitesurvey channel index from %d to %d\n", ++ __FUNCTION__, pmlmeext->sitesurvey_res.channel_idx, k)); ++ pmlmeext->sitesurvey_res.channel_idx = k; ++ break; ++ } ++ k++; ++ } ++#endif ++ } ++ ++ // If channel is used by AP, set channel scan type to active ++ channel = bssid->Configuration.DSConfig; ++ chplan_new = pmlmeext->channel_set; ++ i = 0; ++ while ((i < MAX_CHANNEL_NUM) && (chplan_new[i].ChannelNum != 0)) ++ { ++ if (chplan_new[i].ChannelNum == channel) ++ { ++ if (chplan_new[i].ScanType == SCAN_PASSIVE) ++ { ++ //5G Bnad 2, 3 (DFS) doesn't change to active scan ++ if(channel >= 52 && channel <= 144) ++ break; ++ ++ chplan_new[i].ScanType = SCAN_ACTIVE; ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ++ ("%s: change channel %d scan type from passive to active\n", ++ __FUNCTION__, channel)); ++ } ++ break; ++ } ++ i++; ++ } ++} ++#endif ++ ++/**************************************************************************** ++ ++Following are the functions to report events ++ ++*****************************************************************************/ ++ ++void report_survey_event(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct cmd_obj *pcmd_obj; ++ u8 *pevtcmd; ++ u32 cmdsz; ++ struct survey_event *psurvey_evt; ++ struct C2HEvent_Header *pc2h_evt_hdr; ++ struct mlme_ext_priv *pmlmeext; ++ struct cmd_priv *pcmdpriv; ++ //u8 *pframe = precv_frame->u.hdr.rx_data; ++ //uint len = precv_frame->u.hdr.len; ++ ++ if(!padapter) ++ return; ++ ++ pmlmeext = &padapter->mlmeextpriv; ++ pcmdpriv = &padapter->cmdpriv; ++ ++ ++ if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header)); ++ if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ _rtw_init_listhead(&pcmd_obj->list); ++ ++ pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); ++ pcmd_obj->cmdsz = cmdsz; ++ pcmd_obj->parmbuf = pevtcmd; ++ ++ pcmd_obj->rsp = NULL; ++ pcmd_obj->rspsz = 0; ++ ++ pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); ++ pc2h_evt_hdr->len = sizeof(struct survey_event); ++ pc2h_evt_hdr->ID = GEN_EVT_CODE(_Survey); ++ pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq); ++ ++ psurvey_evt = (struct survey_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); ++ ++ if (collect_bss_info(padapter, precv_frame, (WLAN_BSSID_EX *)&psurvey_evt->bss) == _FAIL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ rtw_mfree((u8 *)pevtcmd, cmdsz); ++ return; ++ } ++ ++#ifdef CONFIG_80211D ++ process_80211d(padapter, &psurvey_evt->bss); ++#endif ++ ++ rtw_enqueue_cmd(pcmdpriv, pcmd_obj); ++ ++ pmlmeext->sitesurvey_res.bss_cnt++; ++ ++ return; ++ ++} ++ ++void report_surveydone_event(_adapter *padapter) ++{ ++ struct cmd_obj *pcmd_obj; ++ u8 *pevtcmd; ++ u32 cmdsz; ++ struct surveydone_event *psurveydone_evt; ++ struct C2HEvent_Header *pc2h_evt_hdr; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ cmdsz = (sizeof(struct surveydone_event) + sizeof(struct C2HEvent_Header)); ++ if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ _rtw_init_listhead(&pcmd_obj->list); ++ ++ pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); ++ pcmd_obj->cmdsz = cmdsz; ++ pcmd_obj->parmbuf = pevtcmd; ++ ++ pcmd_obj->rsp = NULL; ++ pcmd_obj->rspsz = 0; ++ ++ pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); ++ pc2h_evt_hdr->len = sizeof(struct surveydone_event); ++ pc2h_evt_hdr->ID = GEN_EVT_CODE(_SurveyDone); ++ pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq); ++ ++ psurveydone_evt = (struct surveydone_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); ++ psurveydone_evt->bss_cnt = pmlmeext->sitesurvey_res.bss_cnt; ++ ++ DBG_871X("survey done event(%x) band:%d for "ADPT_FMT"\n", psurveydone_evt->bss_cnt, padapter->setband, ADPT_ARG(padapter)); ++ ++ rtw_enqueue_cmd(pcmdpriv, pcmd_obj); ++ ++ return; ++ ++} ++ ++void report_join_res(_adapter *padapter, int res) ++{ ++ struct cmd_obj *pcmd_obj; ++ u8 *pevtcmd; ++ u32 cmdsz; ++ struct joinbss_event *pjoinbss_evt; ++ struct C2HEvent_Header *pc2h_evt_hdr; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header)); ++ if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ _rtw_init_listhead(&pcmd_obj->list); ++ ++ pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); ++ pcmd_obj->cmdsz = cmdsz; ++ pcmd_obj->parmbuf = pevtcmd; ++ ++ pcmd_obj->rsp = NULL; ++ pcmd_obj->rspsz = 0; ++ ++ pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); ++ pc2h_evt_hdr->len = sizeof(struct joinbss_event); ++ pc2h_evt_hdr->ID = GEN_EVT_CODE(_JoinBss); ++ pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq); ++ ++ pjoinbss_evt = (struct joinbss_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); ++ _rtw_memcpy((unsigned char *)(&(pjoinbss_evt->network.network)), &(pmlmeinfo->network), sizeof(WLAN_BSSID_EX)); ++ pjoinbss_evt->network.join_res = pjoinbss_evt->network.aid = res; ++ ++ DBG_871X("report_join_res(%d)\n", res); ++ ++ ++ rtw_joinbss_event_prehandle(padapter, (u8 *)&pjoinbss_evt->network); ++ ++ ++ rtw_enqueue_cmd(pcmdpriv, pcmd_obj); ++ ++ return; ++ ++} ++ ++void report_del_sta_event(_adapter *padapter, unsigned char* MacAddr, unsigned short reason) ++{ ++ struct cmd_obj *pcmd_obj; ++ u8 *pevtcmd; ++ u32 cmdsz; ++ struct sta_info *psta; ++ int mac_id; ++ struct stadel_event *pdel_sta_evt; ++ struct C2HEvent_Header *pc2h_evt_hdr; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ cmdsz = (sizeof(struct stadel_event) + sizeof(struct C2HEvent_Header)); ++ if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ _rtw_init_listhead(&pcmd_obj->list); ++ ++ pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); ++ pcmd_obj->cmdsz = cmdsz; ++ pcmd_obj->parmbuf = pevtcmd; ++ ++ pcmd_obj->rsp = NULL; ++ pcmd_obj->rspsz = 0; ++ ++ pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); ++ pc2h_evt_hdr->len = sizeof(struct stadel_event); ++ pc2h_evt_hdr->ID = GEN_EVT_CODE(_DelSTA); ++ pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq); ++ ++ pdel_sta_evt = (struct stadel_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); ++ _rtw_memcpy((unsigned char *)(&(pdel_sta_evt->macaddr)), MacAddr, ETH_ALEN); ++ _rtw_memcpy((unsigned char *)(pdel_sta_evt->rsvd),(unsigned char *)(&reason),2); ++ ++ ++ psta = rtw_get_stainfo(&padapter->stapriv, MacAddr); ++ if(psta) ++ mac_id = (int)psta->mac_id; ++ else ++ mac_id = (-1); ++ ++ pdel_sta_evt->mac_id = mac_id; ++ ++ DBG_871X("report_del_sta_event: delete STA, mac_id=%d\n", mac_id); ++ ++ rtw_enqueue_cmd(pcmdpriv, pcmd_obj); ++ ++ return; ++} ++ ++void report_add_sta_event(_adapter *padapter, unsigned char* MacAddr, int cam_idx) ++{ ++ struct cmd_obj *pcmd_obj; ++ u8 *pevtcmd; ++ u32 cmdsz; ++ struct stassoc_event *padd_sta_evt; ++ struct C2HEvent_Header *pc2h_evt_hdr; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ ++ if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ cmdsz = (sizeof(struct stassoc_event) + sizeof(struct C2HEvent_Header)); ++ if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL) ++ { ++ rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ _rtw_init_listhead(&pcmd_obj->list); ++ ++ pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT); ++ pcmd_obj->cmdsz = cmdsz; ++ pcmd_obj->parmbuf = pevtcmd; ++ ++ pcmd_obj->rsp = NULL; ++ pcmd_obj->rspsz = 0; ++ ++ pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd); ++ pc2h_evt_hdr->len = sizeof(struct stassoc_event); ++ pc2h_evt_hdr->ID = GEN_EVT_CODE(_AddSTA); ++ pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq); ++ ++ padd_sta_evt = (struct stassoc_event*)(pevtcmd + sizeof(struct C2HEvent_Header)); ++ _rtw_memcpy((unsigned char *)(&(padd_sta_evt->macaddr)), MacAddr, ETH_ALEN); ++ padd_sta_evt->cam_id = cam_idx; ++ ++ DBG_871X("report_add_sta_event: add STA\n"); ++ ++ rtw_enqueue_cmd(pcmdpriv, pcmd_obj); ++ ++ return; ++} ++ ++ ++/**************************************************************************** ++ ++Following are the event callback functions ++ ++*****************************************************************************/ ++ ++//for sta/adhoc mode ++void update_sta_info(_adapter *padapter, struct sta_info *psta) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //ERP ++ VCS_update(padapter, psta); ++ ++ ++ //HT ++ if(pmlmepriv->htpriv.ht_option) ++ { ++ psta->htpriv.ht_option = _TRUE; ++ ++ psta->htpriv.ampdu_enable = pmlmepriv->htpriv.ampdu_enable; ++ ++ if (support_short_GI(padapter, &(pmlmeinfo->HT_caps))) ++ psta->htpriv.sgi = _TRUE; ++ ++ psta->qos_option = _TRUE; ++ ++ } ++ else ++ { ++ psta->htpriv.ht_option = _FALSE; ++ ++ psta->htpriv.ampdu_enable = _FALSE; ++ ++ psta->htpriv.sgi = _FALSE; ++ ++ psta->qos_option = _FALSE; ++ ++ } ++ ++ psta->htpriv.bwmode = pmlmeext->cur_bwmode; ++ psta->htpriv.ch_offset = pmlmeext->cur_ch_offset; ++ ++ psta->htpriv.agg_enable_bitmap = 0x0;//reset ++ psta->htpriv.candidate_tid_bitmap = 0x0;//reset ++ ++ ++ //QoS ++ if(pmlmepriv->qospriv.qos_option) ++ psta->qos_option = _TRUE; ++ ++ ++ psta->state = _FW_LINKED; ++ ++} ++ ++void mlmeext_joinbss_event_callback(_adapter *padapter, int join_res) ++{ ++ struct sta_info *psta, *psta_bmc; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 join_type; ++ ++ if(join_res < 0) ++ { ++ join_type = 1; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr); ++ ++ //restore to initial setting. ++ update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode); ++#if 0 //temply remove ++#ifdef CONFIG_INTEL_WIDI ++#ifdef DBG_CONFIG_ERROR_DETECT ++ DBG_871X("%s(): do silentreset\n",__FUNCTION__); ++ rtw_hal_sreset_reset(padapter); ++#endif ++#endif ++#endif ++ goto exit_mlmeext_joinbss_event_callback; ++ } ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ //for bc/mc ++ psta_bmc = rtw_get_bcmc_stainfo(padapter); ++ if(psta_bmc) ++ { ++ pmlmeinfo->FW_sta_info[psta_bmc->mac_id].psta = psta_bmc; ++ update_bmc_sta_support_rate(padapter, psta_bmc->mac_id); ++ Update_RA_Entry(padapter, psta_bmc->mac_id); ++ } ++ } ++ ++ ++ //turn on dynamic functions ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE); ++ ++ // update IOT-releated issue ++ update_IOT_info(padapter); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, cur_network->SupportedRates); ++ ++ //BCN interval ++ rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&pmlmeinfo->bcn_interval)); ++ ++ //udpate capability ++ update_capinfo(padapter, pmlmeinfo->capability); ++ ++ //WMM, Update EDCA param ++ WMMOnAssocRsp(padapter); ++ ++ //HT ++ HTOnAssocRsp(padapter); ++ ++#ifndef CONFIG_CONCURRENT_MODE ++ // Call set_channel_bwmode when the CONFIG_CONCURRENT_MODE doesn't be defined. ++ //Set cur_channel&cur_bwmode&cur_ch_offset ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++#endif ++ ++ psta = rtw_get_stainfo(pstapriv, cur_network->MacAddress); ++ if (psta) //only for infra. mode ++ { ++ pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta; ++ ++ //DBG_871X("set_sta_rate\n"); ++ ++ //set per sta rate after updating HT cap. ++ set_sta_rate(padapter, psta); ++ } ++ ++ join_type = 2; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) ++ { ++ // correcting TSF ++ correct_TSF(padapter, pmlmeext); ++ ++ //set_link_timer(pmlmeext, DISCONNECT_TO); ++ } ++ ++#ifdef CONFIG_LPS ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_CONNECT, 0); ++#endif ++ ++exit_mlmeext_joinbss_event_callback: ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_handle_join_done(padapter, join_res); ++#endif ++#ifdef CONFIG_CONCURRENT_MODE ++ concurrent_chk_joinbss_done(padapter, join_res); ++#endif ++ ++ DBG_871X("=>%s\n", __FUNCTION__); ++ ++} ++ ++void mlmeext_sta_add_event_callback(_adapter *padapter, struct sta_info *psta) ++{ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 join_type; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ if(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)//adhoc master or sta_count>1 ++ { ++ //nothing to do ++ } ++ else//adhoc client ++ { ++ //update TSF Value ++ //update_TSF(pmlmeext, pframe, len); ++ ++ // correcting TSF ++ correct_TSF(padapter, pmlmeext); ++ ++ //start beacon ++ if(send_beacon(padapter)==_FAIL) ++ { ++ pmlmeinfo->FW_sta_info[psta->mac_id].status = 0; ++ ++ pmlmeinfo->state ^= WIFI_FW_ADHOC_STATE; ++ ++ return; ++ } ++ ++ pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS; ++ ++ } ++ ++ join_type = 2; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ } ++ ++ pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta; ++ ++ //rate radaptive ++ Update_RA_Entry(padapter, psta->mac_id); ++ ++ //update adhoc sta_info ++ update_sta_info(padapter, psta); ++ ++} ++ ++void mlmeext_sta_del_event_callback(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if (is_client_associated_to_ap(padapter) || is_IBSS_empty(padapter)) ++ { ++ //set_opmode_cmd(padapter, infra_client_with_mlme); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr); ++ ++ //restore to initial setting. ++ update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode); ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_set_channel_bwmode_disconnect(padapter); ++#else ++#ifdef CONFIG_CONCURRENT_MODE ++ if((check_buddy_fwstate(padapter, _FW_LINKED)) != _TRUE) ++ { ++#endif //CONFIG_CONCURRENT_MODE ++ ++ //switch to the 20M Hz mode after disconnect ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ //SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset); ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ } ++#endif //CONFIG_CONCURRENT_MODE ++#endif //CONFIG_DUALMAC_CONCURRENT ++ ++ flush_all_cam_entry(padapter); ++ ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ ++ //set MSR to no link state -> infra. mode ++ Set_MSR(padapter, _HW_STATE_STATION_); ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ } ++ ++} ++ ++/**************************************************************************** ++ ++Following are the functions for the timer handlers ++ ++*****************************************************************************/ ++void _linked_rx_signal_strehgth_display(_adapter *padapter); ++void _linked_rx_signal_strehgth_display(_adapter *padapter) ++{ ++ int UndecoratedSmoothedPWDB; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ DBG_871X("============ pbuddy_adapter linked status check ===================\n"); ++ DBG_871X("buddy_adapter_type=%d\n", pbuddy_adapter->adapter_type); ++ DBG_871X("pbuddy_adapter pathA Rx SNRdb:%d\n",pbuddy_adapter->recvpriv.RxSNRdB[0]); ++ DBG_871X("pbuddy_adapter pathA Rx PWDB:%d\n",pbuddy_adapter->recvpriv.rxpwdb); ++ DBG_871X("pbuddy_adapter pathA Rx RSSI:%d,pathB Rx RSSI:%d\n" ++ ,pbuddy_adapter->recvpriv.RxRssi[0],pbuddy_adapter->recvpriv.RxRssi[1]); ++ rtw_hal_get_def_var(pbuddy_adapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB); ++ DBG_871X("pbuddy_adapter UndecoratedSmoothedPWDB:%d\n",UndecoratedSmoothedPWDB); ++ DBG_871X("Rx RSSI:%d\n",pbuddy_adapter->recvpriv.rssi); ++ DBG_871X("Rx Signal_strength:%d\n",pbuddy_adapter->recvpriv.signal_strength); ++ DBG_871X("Rx Signal_qual:%d \n",pbuddy_adapter->recvpriv.signal_qual); ++ DBG_871X("============ linked status check ===================\n"); ++ DBG_871X("adapter_type=%d\n", padapter->adapter_type); ++#else //CONFIG_CONCURRENT_MODE ++ DBG_871X("============ linked status check ===================\n"); ++#endif //CONFIG_CONCURRENT_MODE ++ DBG_871X("pathA Rx SNRdb:%d, pathB Rx SNRdb:%d\n",padapter->recvpriv.RxSNRdB[0], padapter->recvpriv.RxSNRdB[1]); ++ DBG_871X("pathA Rx PWDB:%d\n",padapter->recvpriv.rxpwdb); ++ DBG_871X("pathA Rx RSSI:%d,pathB Rx RSSI:%d\n",padapter->recvpriv.RxRssi[0],padapter->recvpriv.RxRssi[1]); ++ rtw_hal_get_def_var(padapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB); ++ DBG_871X("UndecoratedSmoothedPWDB:%d\n",UndecoratedSmoothedPWDB); ++ DBG_871X("Rx RSSI:%d\n",padapter->recvpriv.rssi); ++ DBG_871X("Rx Signal_strength:%d\n",padapter->recvpriv.signal_strength); ++ DBG_871X("Rx Signal_qual:%d \n",padapter->recvpriv.signal_qual); ++ if ( check_fwstate( &padapter->mlmepriv, _FW_LINKED )) ++ { ++ DBG_871X("bw mode: %d, channel: %d\n", padapter->mlmeextpriv.cur_bwmode, padapter->mlmeextpriv.cur_channel ); ++ DBG_871X("received bytes = %d\n", (u32) (padapter->recvpriv.rx_bytes - padapter->recvpriv.last_rx_bytes ) ); ++ } ++ DBG_871X("============ linked status check ===================\n"); ++ DBG_871X(" DIG PATH-A(0x%02x), PATH-B(0x%02x)\n",rtw_read8(padapter,0xc50),rtw_read8(padapter,0xc58)); ++ DBG_871X(" OFDM -Alarm DA2(0x%04x),DA4(0x%04x),DA6(0x%04x),DA8(0x%04x)\n", ++ rtw_read16(padapter,0xDA2),rtw_read16(padapter,0xDA4),rtw_read16(padapter,0xDA6),rtw_read16(padapter,0xDA8)); ++ ++ DBG_871X(" CCK -Alarm A5B(0x%02x),A5C(0x%02x)\n",rtw_read8(padapter,0xA5B),rtw_read8(padapter,0xA5C)); ++ DBG_871X(" FalseAlmCnt_all(%d)\n",padapter->recvpriv.FalseAlmCnt_all); ++ ++} ++ ++u8 chk_ap_is_alive(_adapter *padapter, struct sta_info *psta) ++{ ++ u8 ret = _FALSE; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ #ifdef DBG_EXPIRATION_CHK ++ DBG_871X(FUNC_ADPT_FMT" rx:"STA_PKTS_FMT", beacon:%llu, probersp_to_self:%llu" ++ /*", probersp_bm:%llu, probersp_uo:%llu, probereq:%llu, BI:%u"*/ ++ ", retry:%u\n" ++ , FUNC_ADPT_ARG(padapter) ++ , STA_RX_PKTS_DIFF_ARG(psta) ++ , psta->sta_stats.rx_beacon_pkts - psta->sta_stats.last_rx_beacon_pkts ++ , psta->sta_stats.rx_probersp_pkts - psta->sta_stats.last_rx_probersp_pkts ++ /*, psta->sta_stats.rx_probersp_bm_pkts - psta->sta_stats.last_rx_probersp_bm_pkts ++ , psta->sta_stats.rx_probersp_uo_pkts - psta->sta_stats.last_rx_probersp_uo_pkts ++ , psta->sta_stats.rx_probereq_pkts - psta->sta_stats.last_rx_probereq_pkts ++ , pmlmeinfo->bcn_interval*/ ++ , pmlmeext->retry ++ ); ++ ++ DBG_871X(FUNC_ADPT_FMT" tx_pkts:%llu, link_count:%u\n", FUNC_ADPT_ARG(padapter) ++ , padapter->xmitpriv.tx_pkts ++ , pmlmeinfo->link_count ++ ); ++ #endif ++ ++ if((sta_rx_data_pkts(psta) == sta_last_rx_data_pkts(psta)) ++ && sta_rx_beacon_pkts(psta) == sta_last_rx_beacon_pkts(psta) ++ && sta_rx_probersp_pkts(psta) == sta_last_rx_probersp_pkts(psta) ++ ) ++ { ++ ret = _FALSE; ++ } ++ else ++ { ++ ret = _TRUE; ++ } ++ ++ sta_update_last_rx_pkts(psta); ++ ++ return ret; ++} ++ ++void linked_status_chk(_adapter *padapter) ++{ ++ u32 i; ++ struct sta_info *psta; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ if(padapter->bRxRSSIDisplay) ++ _linked_rx_signal_strehgth_display(padapter); ++ ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ rtw_hal_sreset_linked_status_check(padapter); ++ #endif ++ ++ if (is_client_associated_to_ap(padapter)) ++ { ++ //linked infrastructure client mode ++ ++ int tx_chk = _SUCCESS, rx_chk = _SUCCESS; ++ int rx_chk_limit; ++ ++ #if defined(DBG_ROAMING_TEST) ++ rx_chk_limit = 1; ++ #elif defined(CONFIG_ACTIVE_KEEP_ALIVE_CHECK) ++ rx_chk_limit = 4; ++ #else ++ rx_chk_limit = 8; ++ #endif ++ ++ // Marked by Kurt 20130715 ++ // For WiDi 3.5 and later on, they don't ask WiDi sink to do roaming, so we could not check rx limit that strictly. ++ // todo: To check why rx_chk would be _FALSE under miracast session. ++ //#ifdef CONFIG_INTEL_WIDI ++ //if (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_NONE) ++ // rx_chk_limit = 1; ++ //#endif ++ ++ if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL) ++ { ++ bool is_p2p_enable = _FALSE; ++ #ifdef CONFIG_P2P ++ is_p2p_enable = !rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE); ++ #endif ++ ++ if (chk_ap_is_alive(padapter, psta) == _FALSE) ++ rx_chk = _FAIL; ++ ++ if (pxmitpriv->last_tx_pkts == pxmitpriv->tx_pkts) ++ tx_chk = _FAIL; ++ ++ #ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ if (pmlmeext->active_keep_alive_check && (rx_chk == _FAIL || tx_chk == _FAIL)) { ++ u8 backup_oper_channel=0; ++ ++ /* switch to correct channel of current network before issue keep-alive frames */ ++ if (rtw_get_oper_ch(padapter) != pmlmeext->cur_channel) { ++ backup_oper_channel = rtw_get_oper_ch(padapter); ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ } ++ ++ if (rx_chk != _SUCCESS) ++ issue_probereq_ex(padapter, &pmlmeinfo->network.Ssid, psta->hwaddr, 3, 1); ++ ++ if ((tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) || rx_chk != _SUCCESS) { ++ tx_chk = issue_nulldata(padapter, psta->hwaddr, 0, 3, 1); ++ /* if tx acked and p2p disabled, set rx_chk _SUCCESS to reset retry count */ ++ if (tx_chk == _SUCCESS && !is_p2p_enable) ++ rx_chk = _SUCCESS; ++ } ++ ++ /* back to the original operation channel */ ++ if(backup_oper_channel>0) ++ SelectChannel(padapter, backup_oper_channel); ++ ++ } ++ else ++ #endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */ ++ { ++ if (rx_chk != _SUCCESS) { ++ if (pmlmeext->retry == 0) { ++ #ifdef DBG_EXPIRATION_CHK ++ DBG_871X("issue_probereq to trigger probersp, retry=%d\n", pmlmeext->retry); ++ #endif ++ issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); ++ issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); ++ issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress); ++ } ++ } ++ ++ if (tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) { ++ #ifdef DBG_EXPIRATION_CHK ++ DBG_871X("%s issue_nulldata 0\n", __FUNCTION__); ++ #endif ++ tx_chk = issue_nulldata(padapter, NULL, 0, 1, 0); ++ } ++ } ++ ++ if (rx_chk == _FAIL) { ++ pmlmeext->retry++; ++ if (pmlmeext->retry > rx_chk_limit) { ++ DBG_871X(FUNC_ADPT_FMT" disconnect or roaming\n", ++ FUNC_ADPT_ARG(padapter)); ++ receive_disconnect(padapter, pmlmeinfo->network.MacAddress ++ , WLAN_REASON_EXPIRATION_CHK); ++ return; ++ } ++ } else { ++ pmlmeext->retry = 0; ++ } ++ ++ if (tx_chk == _FAIL) { ++ pmlmeinfo->link_count &= 0xf; ++ } else { ++ pxmitpriv->last_tx_pkts = pxmitpriv->tx_pkts; ++ pmlmeinfo->link_count = 0; ++ } ++ ++ } //end of if ((psta = rtw_get_stainfo(pstapriv, passoc_res->network.MacAddress)) != NULL) ++ } ++ else if (is_client_associated_to_ibss(padapter)) ++ { ++ //linked IBSS mode ++ //for each assoc list entry to check the rx pkt counter ++ for (i = IBSS_START_MAC_ID; i < NUM_STA; i++) ++ { ++ if (pmlmeinfo->FW_sta_info[i].status == 1) ++ { ++ psta = pmlmeinfo->FW_sta_info[i].psta; ++ ++ if(NULL==psta) continue; ++ ++ if (pmlmeinfo->FW_sta_info[i].rx_pkt == sta_rx_pkts(psta)) ++ { ++ ++ if(pmlmeinfo->FW_sta_info[i].retry<3) ++ { ++ pmlmeinfo->FW_sta_info[i].retry++; ++ } ++ else ++ { ++ pmlmeinfo->FW_sta_info[i].retry = 0; ++ pmlmeinfo->FW_sta_info[i].status = 0; ++ report_del_sta_event(padapter, psta->hwaddr ++ , 65535// indicate disconnect caused by no rx ++ ); ++ } ++ } ++ else ++ { ++ pmlmeinfo->FW_sta_info[i].retry = 0; ++ pmlmeinfo->FW_sta_info[i].rx_pkt = (u32)sta_rx_pkts(psta); ++ } ++ } ++ } ++ ++ //set_link_timer(pmlmeext, DISCONNECT_TO); ++ ++ } ++ ++} ++ ++void survey_timer_hdl(_adapter *padapter) ++{ ++ struct cmd_obj *ph2c; ++ struct sitesurvey_parm *psurveyPara; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif ++ ++ //DBG_871X("marc: survey timer\n"); ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_lock(NULL); ++ if (callout_pending(&padapter->mlmeextpriv.survey_timer.callout)) { ++ /* callout was reset */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ if (!callout_active(&padapter->mlmeextpriv.survey_timer.callout)) { ++ /* callout was stopped */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ callout_deactivate(&padapter->mlmeextpriv.survey_timer.callout); ++ ++ ++#endif ++ ++ //issue rtw_sitesurvey_cmd ++ if (pmlmeext->sitesurvey_res.state > SCAN_START) ++ { ++ if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS) ++ { ++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ if( padapter->mlmeextpriv.mlmext_info.scan_cnt != RTW_SCAN_NUM_OF_CH ) ++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ pmlmeext->sitesurvey_res.channel_idx++; ++ } ++ ++ if(pmlmeext->scan_abort == _TRUE) ++ { ++ #ifdef CONFIG_P2P ++ if(!rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE)) ++ { ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX); ++ pmlmeext->sitesurvey_res.channel_idx = 3; ++ DBG_871X("%s idx:%d, cnt:%u\n", __FUNCTION__ ++ , pmlmeext->sitesurvey_res.channel_idx ++ , pwdinfo->find_phase_state_exchange_cnt ++ ); ++ } ++ else ++ #endif ++ { ++ pmlmeext->sitesurvey_res.channel_idx = pmlmeext->sitesurvey_res.ch_num; ++ DBG_871X("%s idx:%d\n", __FUNCTION__ ++ , pmlmeext->sitesurvey_res.channel_idx ++ ); ++ } ++ ++ pmlmeext->scan_abort = _FALSE;//reset ++ } ++ ++ if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ goto exit_survey_timer_hdl; ++ } ++ ++ if ((psurveyPara = (struct sitesurvey_parm*)rtw_zmalloc(sizeof(struct sitesurvey_parm))) == NULL) ++ { ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ goto exit_survey_timer_hdl; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psurveyPara, GEN_CMD_CODE(_SiteSurvey)); ++ rtw_enqueue_cmd(pcmdpriv, ph2c); ++ } ++ ++ ++exit_survey_timer_hdl: ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_unlock(NULL); ++#endif ++ ++ return; ++} ++ ++void link_timer_hdl(_adapter *padapter) ++{ ++ //static unsigned int rx_pkt = 0; ++ //static u64 tx_cnt = 0; ++ //struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ //struct sta_priv *pstapriv = &padapter->stapriv; ++ ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_lock(NULL); ++ if (callout_pending(&padapter->mlmeextpriv.survey_timer.callout)) { ++ /* callout was reset */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ if (!callout_active(&padapter->mlmeextpriv.survey_timer.callout)) { ++ /* callout was stopped */ ++ //mtx_unlock(&sc->sc_mtx); ++ rtw_mtx_unlock(NULL); ++ return; ++ } ++ callout_deactivate(&padapter->mlmeextpriv.survey_timer.callout); ++ ++ ++#endif ++ ++ if (pmlmeinfo->state & WIFI_FW_AUTH_NULL) ++ { ++ DBG_871X("link_timer_hdl:no beacon while connecting\n"); ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ report_join_res(padapter, -3); ++ } ++ else if (pmlmeinfo->state & WIFI_FW_AUTH_STATE) ++ { ++ //re-auth timer ++ if (++pmlmeinfo->reauth_count > REAUTH_LIMIT) ++ { ++ //if (pmlmeinfo->auth_algo != dot11AuthAlgrthm_Auto) ++ //{ ++ pmlmeinfo->state = 0; ++ report_join_res(padapter, -1); ++ return; ++ //} ++ //else ++ //{ ++ // pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared; ++ // pmlmeinfo->reauth_count = 0; ++ //} ++ } ++ ++ DBG_871X("link_timer_hdl: auth timeout and try again\n"); ++ pmlmeinfo->auth_seq = 1; ++ issue_auth(padapter, NULL, 0); ++ set_link_timer(pmlmeext, REAUTH_TO); ++ } ++ else if (pmlmeinfo->state & WIFI_FW_ASSOC_STATE) ++ { ++ //re-assoc timer ++ if (++pmlmeinfo->reassoc_count > REASSOC_LIMIT) ++ { ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ report_join_res(padapter, -2); ++ return; ++ } ++ ++ DBG_871X("link_timer_hdl: assoc timeout and try again\n"); ++ issue_assocreq(padapter); ++ set_link_timer(pmlmeext, REASSOC_TO); ++ } ++#if 0 ++ else if (is_client_associated_to_ap(padapter)) ++ { ++ //linked infrastructure client mode ++ if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL) ++ { ++ /*to monitor whether the AP is alive or not*/ ++ if (rx_pkt == psta->sta_stats.rx_pkts) ++ { ++ receive_disconnect(padapter, pmlmeinfo->network.MacAddress); ++ return; ++ } ++ else ++ { ++ rx_pkt = psta->sta_stats.rx_pkts; ++ set_link_timer(pmlmeext, DISCONNECT_TO); ++ } ++ ++ //update the EDCA paramter according to the Tx/RX mode ++ update_EDCA_param(padapter); ++ ++ /*to send the AP a nulldata if no frame is xmitted in order to keep alive*/ ++ if (pmlmeinfo->link_count++ == 0) ++ { ++ tx_cnt = pxmitpriv->tx_pkts; ++ } ++ else if ((pmlmeinfo->link_count & 0xf) == 0) ++ { ++ if (tx_cnt == pxmitpriv->tx_pkts) ++ { ++ issue_nulldata(padapter, NULL, 0, 0, 0); ++ } ++ ++ tx_cnt = pxmitpriv->tx_pkts; ++ } ++ } //end of if ((psta = rtw_get_stainfo(pstapriv, passoc_res->network.MacAddress)) != NULL) ++ } ++ else if (is_client_associated_to_ibss(padapter)) ++ { ++ //linked IBSS mode ++ //for each assoc list entry to check the rx pkt counter ++ for (i = IBSS_START_MAC_ID; i < NUM_STA; i++) ++ { ++ if (pmlmeinfo->FW_sta_info[i].status == 1) ++ { ++ psta = pmlmeinfo->FW_sta_info[i].psta; ++ ++ if (pmlmeinfo->FW_sta_info[i].rx_pkt == psta->sta_stats.rx_pkts) ++ { ++ pmlmeinfo->FW_sta_info[i].status = 0; ++ report_del_sta_event(padapter, psta->hwaddr); ++ } ++ else ++ { ++ pmlmeinfo->FW_sta_info[i].rx_pkt = psta->sta_stats.rx_pkts; ++ } ++ } ++ } ++ ++ set_link_timer(pmlmeext, DISCONNECT_TO); ++ } ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ rtw_mtx_unlock(NULL); ++#endif ++ ++ return; ++} ++ ++void addba_timer_hdl(struct sta_info *psta) ++{ ++ struct ht_priv *phtpriv; ++ ++ if(!psta) ++ return; ++ ++ phtpriv = &psta->htpriv; ++ ++ if((phtpriv->ht_option==_TRUE) && (phtpriv->ampdu_enable==_TRUE)) ++ { ++ if(phtpriv->candidate_tid_bitmap) ++ phtpriv->candidate_tid_bitmap=0x0; ++ ++ } ++} ++ ++#ifdef CONFIG_IEEE80211W ++void sa_query_timer_hdl(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_priv * pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ //disconnect ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ rtw_disassoc_cmd(padapter, 0, _TRUE); ++ rtw_indicate_disconnect(padapter); ++ rtw_free_assoc_resources(padapter, 1); ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ DBG_871X("SA query timeout disconnect\n"); ++} ++#endif //CONFIG_IEEE80211W ++ ++u8 NULL_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ return H2C_SUCCESS; ++} ++ ++#ifdef CONFIG_AUTO_AP_MODE ++void rtw_start_auto_ap(_adapter *adapter) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ rtw_set_802_11_infrastructure_mode(adapter, Ndis802_11APMode); ++ ++ rtw_setopmode_cmd(adapter, Ndis802_11APMode); ++} ++ ++static int rtw_auto_ap_start_beacon(_adapter *adapter) ++{ ++ int ret=0; ++ u8 *pbuf = NULL; ++ uint len; ++ u8 supportRate[16]; ++ int sz = 0, rateLen; ++ u8 * ie; ++ u8 wireless_mode, oper_channel; ++ u8 ssid[3] = {0}; //hidden ssid ++ u32 ssid_len = sizeof(ssid); ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ ++ len = 128; ++ pbuf = rtw_zmalloc(len); ++ if(!pbuf) ++ return -ENOMEM; ++ ++ ++ //generate beacon ++ ie = pbuf; ++ ++ //timestamp will be inserted by hardware ++ sz += 8; ++ ie += sz; ++ ++ //beacon interval : 2bytes ++ *(u16*)ie = cpu_to_le16((u16)100);//BCN_INTERVAL=100; ++ sz += 2; ++ ie += 2; ++ ++ //capability info ++ *(u16*)ie = 0; ++ *(u16*)ie |= cpu_to_le16(cap_ESS); ++ *(u16*)ie |= cpu_to_le16(cap_ShortPremble); ++ //*(u16*)ie |= cpu_to_le16(cap_Privacy); ++ sz += 2; ++ ie += 2; ++ ++ //SSID ++ ie = rtw_set_ie(ie, _SSID_IE_, ssid_len, ssid, &sz); ++ ++ //supported rates ++ wireless_mode = WIRELESS_11BG_24N; ++ rtw_set_supported_rate(supportRate, wireless_mode) ; ++ rateLen = rtw_get_rateset_len(supportRate); ++ if (rateLen > 8) ++ { ++ ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, 8, supportRate, &sz); ++ } ++ else ++ { ++ ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, rateLen, supportRate, &sz); ++ } ++ ++ ++ //DS parameter set ++ if(check_buddy_fwstate(adapter, _FW_LINKED) && ++ check_buddy_fwstate(adapter, WIFI_STATION_STATE)) ++ { ++ PADAPTER pbuddy_adapter = adapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ oper_channel = pbuddy_mlmeext->cur_channel; ++ } ++ else ++ { ++ oper_channel = adapter_to_dvobj(adapter)->oper_channel; ++ } ++ ie = rtw_set_ie(ie, _DSSET_IE_, 1, &oper_channel, &sz); ++ ++ //ext supported rates ++ if (rateLen > 8) ++ { ++ ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (supportRate + 8), &sz); ++ } ++ ++ DBG_871X("%s, start auto ap beacon sz=%d\n", __FUNCTION__, sz); ++ ++ //lunch ap mode & start to issue beacon ++ if(rtw_check_beacon_data(adapter, pbuf, sz) == _SUCCESS) ++ { ++ ++ } ++ else ++ { ++ ret = -EINVAL; ++ } ++ ++ ++ rtw_mfree(pbuf, len); ++ ++ return ret; ++ ++} ++#endif//CONFIG_AUTO_AP_MODE ++ ++u8 setopmode_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ u8 type; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct setopmode_parm *psetop = (struct setopmode_parm *)pbuf; ++ ++ if(psetop->mode == Ndis802_11APMode) ++ { ++ pmlmeinfo->state = WIFI_FW_AP_STATE; ++ type = _HW_STATE_AP_; ++#ifdef CONFIG_NATIVEAP_MLME ++ //start_ap_mode(padapter); ++#endif ++ } ++ else if(psetop->mode == Ndis802_11Infrastructure) ++ { ++ pmlmeinfo->state &= ~(BIT(0)|BIT(1));// clear state ++ pmlmeinfo->state |= WIFI_FW_STATION_STATE;//set to STATION_STATE ++ type = _HW_STATE_STATION_; ++ } ++ else if(psetop->mode == Ndis802_11IBSS) ++ { ++ type = _HW_STATE_ADHOC_; ++ } ++ else ++ { ++ type = _HW_STATE_NOLINK_; ++ } ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_SET_OPMODE, (u8 *)(&type)); ++ //Set_NETYPE0_MSR(padapter, type); ++ ++#ifdef CONFIG_AUTO_AP_MODE ++ if(psetop->mode == Ndis802_11APMode) ++ rtw_auto_ap_start_beacon(padapter); ++#endif ++ ++ return H2C_SUCCESS; ++ ++} ++ ++u8 createbss_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++ struct joinbss_parm *pparm = (struct joinbss_parm *)pbuf; ++ u32 initialgain; ++ ++ ++ if(pparm->network.InfrastructureMode == Ndis802_11APMode) ++ { ++#ifdef CONFIG_AP_MODE ++ ++ if(pmlmeinfo->state == WIFI_FW_AP_STATE) ++ { ++ //todo: ++ return H2C_SUCCESS; ++ } ++#endif ++ } ++ ++ //below is for ad-hoc master ++ if(pparm->network.InfrastructureMode == Ndis802_11IBSS) ++ { ++ rtw_joinbss_reset(padapter); ++ ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset= HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ pmlmeinfo->ERP_enable = 0; ++ pmlmeinfo->WMM_enable = 0; ++ pmlmeinfo->HT_enable = 0; ++ pmlmeinfo->HT_caps_enable = 0; ++ pmlmeinfo->HT_info_enable = 0; ++ pmlmeinfo->agg_enable_bitmap = 0; ++ pmlmeinfo->candidate_tid_bitmap = 0; ++ ++ //disable dynamic functions, such as high power, DIG ++ Save_DM_Func_Flag(padapter); ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ //config the initial gain under linking, need to write the BB registers ++ initialgain = 0x1E; ++ rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ ++ //cancel link timer ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ //clear CAM ++ flush_all_cam_entry(padapter); ++ ++ _rtw_memcpy(pnetwork, pbuf, FIELD_OFFSET(WLAN_BSSID_EX, IELength)); ++ pnetwork->IELength = ((WLAN_BSSID_EX *)pbuf)->IELength; ++ ++ if(pnetwork->IELength>MAX_IE_SZ)//Check pbuf->IELength ++ return H2C_PARAMETERS_ERROR; ++ ++ _rtw_memcpy(pnetwork->IEs, ((WLAN_BSSID_EX *)pbuf)->IEs, pnetwork->IELength); ++ ++ start_create_ibss(padapter); ++ ++ } ++ ++ return H2C_SUCCESS; ++ ++} ++ ++u8 join_cmd_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ u8 join_type; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ struct joinbss_parm *pparm = (struct joinbss_parm *)pbuf; ++#endif //CONFIG_ANTENNA_DIVERSITY ++ u32 initialgain, i; ++ u8 cbw40_enable=0; ++ //u32 acparm; ++ ++ //check already connecting to AP or not ++ if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) ++ { ++ if (pmlmeinfo->state & WIFI_FW_STATION_STATE) ++ { ++ issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, 5, 100); ++ } ++ ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ ++ //clear CAM ++ flush_all_cam_entry(padapter); ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ //set MSR to nolink -> infra. mode ++ //Set_MSR(padapter, _HW_STATE_NOLINK_); ++ Set_MSR(padapter, _HW_STATE_STATION_); ++ ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0); ++ } ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ rtw_antenna_select_cmd(padapter, pparm->network.PhyInfo.Optimum_antenna, _FALSE); ++#endif ++ ++ rtw_joinbss_reset(padapter); ++ ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset= HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ pmlmeinfo->ERP_enable = 0; ++ pmlmeinfo->WMM_enable = 0; ++ pmlmeinfo->HT_enable = 0; ++ pmlmeinfo->HT_caps_enable = 0; ++ pmlmeinfo->HT_info_enable = 0; ++ pmlmeinfo->agg_enable_bitmap = 0; ++ pmlmeinfo->candidate_tid_bitmap = 0; ++ pmlmeinfo->bwmode_updated = _FALSE; ++ //pmlmeinfo->assoc_AP_vendor = maxAP; ++ ++ _rtw_memcpy(pnetwork, pbuf, FIELD_OFFSET(WLAN_BSSID_EX, IELength)); ++ pnetwork->IELength = ((WLAN_BSSID_EX *)pbuf)->IELength; ++ ++ if(pnetwork->IELength>MAX_IE_SZ)//Check pbuf->IELength ++ return H2C_PARAMETERS_ERROR; ++ ++ _rtw_memcpy(pnetwork->IEs, ((WLAN_BSSID_EX *)pbuf)->IEs, pnetwork->IELength); ++ ++ pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig; ++ pmlmeinfo->bcn_interval = get_beacon_interval(pnetwork); ++ ++ //Check AP vendor to move rtw_joinbss_cmd() ++ //pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pnetwork->IEs, pnetwork->IELength); ++ ++ for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pnetwork->IELength;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pnetwork->IEs + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _VENDOR_SPECIFIC_IE_://Get WMM IE. ++ if ( _rtw_memcmp(pIE->data, WMM_OUI, 4) ) ++ { ++ pmlmeinfo->WMM_enable = 1; ++ } ++ break; ++ ++ case _HT_CAPABILITY_IE_: //Get HT Cap IE. ++ pmlmeinfo->HT_caps_enable = 1; ++ break; ++ ++ case _HT_EXTRA_INFO_IE_: //Get HT Info IE. ++ pmlmeinfo->HT_info_enable = 1; ++ ++ //spec case only for cisco's ap because cisco's ap issue assoc rsp using mcs rate @40MHz or @20MHz ++//#if !defined(CONFIG_CONCURRENT_MODE) && !defined(CONFIG_DUALMAC_CONCURRENT) ++// if(pmlmeinfo->assoc_AP_vendor == ciscoAP) ++//#endif ++ { ++ struct HT_info_element *pht_info = (struct HT_info_element *)(pIE->data); ++ ++ if( pnetwork->Configuration.DSConfig > 14 ) ++ { ++ if( pregpriv->cbw40_enable & BIT(1) ) ++ cbw40_enable = 1; ++ } ++ else ++ if( pregpriv->cbw40_enable & BIT(0) ) ++ cbw40_enable = 1; ++ ++ if ((cbw40_enable) && (pht_info->infos[0] & BIT(2))) ++ { ++ //switch to the 40M Hz mode according to the AP ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ switch (pht_info->infos[0] & 0x3) ++ { ++ case 1: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ ++ case 3: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ ++ default: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ } ++ ++ DBG_871X("set ch/bw before connected\n"); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++#if 0 ++ if (padapter->registrypriv.wifi_spec) { ++ // for WiFi test, follow WMM test plan spec ++ acparm = 0x002F431C; // VO ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm)); ++ acparm = 0x005E541C; // VI ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm)); ++ acparm = 0x0000A525; // BE ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm)); ++ acparm = 0x0000A549; // BK ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm)); ++ ++ // for WiFi test, mixed mode with intel STA under bg mode throughput issue ++ if (padapter->mlmepriv.htpriv.ht_option == _FALSE){ ++ acparm = 0x00004320; ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm)); ++ } ++ } ++ else { ++ acparm = 0x002F3217; // VO ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm)); ++ acparm = 0x005E4317; // VI ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm)); ++ acparm = 0x00105320; // BE ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm)); ++ acparm = 0x0000A444; // BK ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm)); ++ } ++#endif ++ ++ /* check channel, bandwidth, offset and switch */ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ if(dc_handle_join_request(padapter) == _FAIL) { ++ DBG_871X("dc_handle_join_request fail !!!\n"); ++ return H2C_SUCCESS; ++ } ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++#else //NON CONFIG_DUALMAC_CONCURRENT ++ if(rtw_chk_start_clnt_join(padapter) == _FAIL) { ++ report_join_res(padapter, (-4)); ++ return H2C_SUCCESS; ++ } ++#endif ++ ++ //disable dynamic functions, such as high power, DIG ++ //Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ //config the initial gain under linking, need to write the BB registers ++ ++ initialgain = 0x1E; ++ rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress); ++ join_type = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ ++ //cancel link timer ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ start_clnt_join(padapter); ++ ++ return H2C_SUCCESS; ++ ++} ++ ++u8 disconnect_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct disconnect_parm *param = (struct disconnect_parm *)pbuf; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++ u8 val8; ++ ++ if (is_client_associated_to_ap(padapter)) ++ { ++ issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, param->deauth_timeout_ms/100, 100); ++ } ++ ++ //set_opmode_cmd(padapter, infra_client_with_mlme); ++ ++ //pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr); ++ ++ //restore to initial setting. ++ update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode); ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //Stop BCN ++ val8 = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_BCN_FUNC, (u8 *)(&val8)); ++ } ++ ++ ++ //set MSR to no link state -> infra. mode ++ Set_MSR(padapter, _HW_STATE_STATION_); ++ ++ pmlmeinfo->state = WIFI_FW_NULL_STATE; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ dc_set_channel_bwmode_disconnect(padapter); ++#else ++#ifdef CONFIG_CONCURRENT_MODE ++ if((check_buddy_fwstate(padapter, _FW_LINKED)) != _TRUE) ++ { ++#endif //CONFIG_CONCURRENT_MODE ++ //switch to the 20M Hz mode after disconnect ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++#ifdef CONFIG_CONCURRENT_MODE ++ } ++#endif //CONFIG_CONCURRENT_MODE ++#endif //CONFIG_DUALMAC_CONCURRENT ++ ++ flush_all_cam_entry(padapter); ++ ++ _cancel_timer_ex(&pmlmeext->link_timer); ++ ++ rtw_free_uc_swdec_pending_queue(padapter); ++ ++ return H2C_SUCCESS; ++} ++ ++int rtw_scan_ch_decision(_adapter *padapter, struct rtw_ieee80211_channel *out, ++ u32 out_num, struct rtw_ieee80211_channel *in, u32 in_num) ++{ ++ int i, j; ++ int scan_ch_num = 0; ++ int set_idx; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ /* clear first */ ++ _rtw_memset(out, 0, sizeof(struct rtw_ieee80211_channel)*out_num); ++ ++ /* acquire channels from in */ ++ j = 0; ++ for (i=0;ichannel_set, in[i].hw_value)) >=0 ++ && rtw_mlme_band_check(padapter, in[i].hw_value) == _TRUE ++ ) ++ { ++ if (j >= out_num) { ++ DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" out_num:%u not enough\n", ++ FUNC_ADPT_ARG(padapter), out_num); ++ break; ++ } ++ ++ _rtw_memcpy(&out[j], &in[i], sizeof(struct rtw_ieee80211_channel)); ++ ++ if(pmlmeext->channel_set[set_idx].ScanType == SCAN_PASSIVE) ++ out[j].flags &= RTW_IEEE80211_CHAN_PASSIVE_SCAN; ++ ++ j++; ++ } ++ if(j>=out_num) ++ break; ++ } ++ ++ /* if out is empty, use channel_set as default */ ++ if(j == 0) { ++ for (i=0;imax_chan_nums;i++) { ++ ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" ch:%u\n", FUNC_ADPT_ARG(padapter), pmlmeext->channel_set[i].ChannelNum); ++ ++ if (rtw_mlme_band_check(padapter, pmlmeext->channel_set[i].ChannelNum) == _TRUE) { ++ ++ if (j >= out_num) { ++ DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" out_num:%u not enough\n", ++ FUNC_ADPT_ARG(padapter), out_num); ++ break; ++ } ++ ++ out[j].hw_value = pmlmeext->channel_set[i].ChannelNum; ++ ++ if(pmlmeext->channel_set[i].ScanType == SCAN_PASSIVE) ++ out[j].flags &= RTW_IEEE80211_CHAN_PASSIVE_SCAN; ++ ++ j++; ++ } ++ } ++ } ++ ++ return j; ++} ++ ++u8 sitesurvey_cmd_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct sitesurvey_parm *pparm = (struct sitesurvey_parm *)pbuf; ++ u8 bdelayscan = _FALSE; ++ u8 val8; ++ u32 initialgain; ++ u32 i; ++ u8 write_initial_gain = 1; ++ ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif ++ ++ if (pmlmeext->sitesurvey_res.state == SCAN_DISABLE) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ //for first time sitesurvey_cmd ++ rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ pmlmeext->sitesurvey_res.state = SCAN_START; ++ pmlmeext->sitesurvey_res.bss_cnt = 0; ++ pmlmeext->sitesurvey_res.channel_idx = 0; ++ ++ for(i=0;issid[i].SsidLength) { ++ _rtw_memcpy(pmlmeext->sitesurvey_res.ssid[i].Ssid, pparm->ssid[i].Ssid, IW_ESSID_MAX_SIZE); ++ pmlmeext->sitesurvey_res.ssid[i].SsidLength= pparm->ssid[i].SsidLength; ++ } else { ++ pmlmeext->sitesurvey_res.ssid[i].SsidLength= 0; ++ } ++ } ++ ++ pmlmeext->sitesurvey_res.ch_num = rtw_scan_ch_decision(padapter ++ , pmlmeext->sitesurvey_res.ch, RTW_CHANNEL_SCAN_AMOUNT ++ , pparm->ch, pparm->ch_num ++ ); ++ ++ pmlmeext->sitesurvey_res.scan_mode = pparm->scan_mode; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ bdelayscan = dc_handle_site_survey(padapter); ++#endif ++ ++ //issue null data if associating to the AP ++ if (is_client_associated_to_ap(padapter) == _TRUE) ++ { ++ pmlmeext->sitesurvey_res.state = SCAN_TXNULL; ++ ++ issue_nulldata(padapter, NULL, 1, 3, 500); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE) ++ { ++ DBG_871X("adapter is scanning(buddy_adapter is linked), issue nulldata(pwrbit=1)\n"); ++ ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500); ++ } ++#endif ++ bdelayscan = _TRUE; ++ } ++#ifdef CONFIG_CONCURRENT_MODE ++ else if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE) ++ { ++ #ifdef CONFIG_TDLS ++ if(padapter->pbuddy_adapter->wdinfo.wfd_tdls_enable == 1) ++ { ++ issue_tunneled_probe_req(padapter->pbuddy_adapter); ++ } ++ #endif //CONFIG_TDLS ++ ++ pmlmeext->sitesurvey_res.state = SCAN_TXNULL; ++ ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500); ++ ++ bdelayscan = _TRUE; ++ } ++#endif ++ if(bdelayscan) ++ { ++ //delay 50ms to protect nulldata(1). ++ set_survey_timer(pmlmeext, 50); ++ return H2C_SUCCESS; ++ } ++ } ++ ++ if ((pmlmeext->sitesurvey_res.state == SCAN_START) || (pmlmeext->sitesurvey_res.state == SCAN_TXNULL)) ++ { ++#ifdef CONFIG_FIND_BEST_CHANNEL ++#if 0 ++ for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) { ++ pmlmeext->channel_set[i].rx_count = 0; ++ } ++#endif ++#endif /* CONFIG_FIND_BEST_CHANNEL */ ++ ++ //disable dynamic functions, such as high power, DIG ++ Save_DM_Func_Flag(padapter); ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ //config the initial gain under scaning, need to write the BB registers ++ ++#ifdef CONFIG_P2P ++#ifdef CONFIG_IOCTL_CFG80211 ++ if((wdev_to_priv(padapter->rtw_wdev))->p2p_enabled == _TRUE && pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ write_initial_gain = 0; ++ } ++ else ++#endif //CONFIG_IOCTL_CFG80211 ++ if ( !rtw_p2p_chk_state( pwdinfo, P2P_STATE_NONE ) ) ++ initialgain = 0x28; ++ else ++#endif //CONFIG_P2P ++ initialgain = 0x17; ++ ++ if(write_initial_gain == 1) ++ rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain)); ++ ++ //set MSR to no link state ++ Set_MSR(padapter, _HW_STATE_NOLINK_); ++ ++ val8 = 1; //under site survey ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ ++ pmlmeext->sitesurvey_res.state = SCAN_PROCESS; ++ } ++ ++ site_survey(padapter); ++ ++ return H2C_SUCCESS; ++ ++} ++ ++u8 setauth_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct setauth_parm *pparm = (struct setauth_parm *)pbuf; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if (pparm->mode < 4) ++ { ++ pmlmeinfo->auth_algo = pparm->mode; ++ } ++ ++ return H2C_SUCCESS; ++} ++ ++u8 setkey_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ unsigned short ctrl; ++ struct setkey_parm *pparm = (struct setkey_parm *)pbuf; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ unsigned char null_sta[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; ++ ++ //main tx key for wep. ++ if(pparm->set_tx) ++ pmlmeinfo->key_index = pparm->keyid; ++ ++ //write cam ++ ctrl = BIT(15) | ((pparm->algorithm) << 2) | pparm->keyid; ++ ++ write_cam(padapter, pparm->keyid, ctrl, null_sta, pparm->key); ++ ++ //allow multicast packets to driver ++ rtw_hal_set_hwreg(padapter, HW_VAR_ON_RCR_AM, null_addr); ++ ++ return H2C_SUCCESS; ++} ++ ++u8 set_stakey_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ u16 ctrl=0; ++ u8 cam_id;//cam_entry ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct set_stakey_parm *pparm = (struct set_stakey_parm *)pbuf; ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta; ++#endif //CONFIG_TDLS ++ ++ //cam_entry: ++ //0~3 for default key ++ ++ //for concurrent mode (ap+sta): ++ //default key is disable, using sw encrypt/decrypt ++ //cam_entry = 4 //for sta mode (macid=0) ++ //cam_entry(macid+3) = 5 ~ N//for ap mode (aid=1~N, macid=2 ~N) ++ ++ //for concurrent mode (sta+sta): ++ //default key is disable, using sw encrypt/decrypt ++ //cam_entry = 4 //mapping to macid=0 ++ //cam_entry = 5 //mapping to macid=2 ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) ++ { ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta; ++ ++ psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress); ++ ++ if(psta && psta->mac_id==2) ++ { ++ cam_id = 5; ++ } ++ else ++ { ++ cam_id = 4; ++ } ++/* ++ if(padapter->iface_type > PRIMARY_IFACE) ++ { ++ cam_id = 5; ++ } ++ else ++ { ++ cam_id = 4; ++ } ++*/ ++ } ++#else ++ cam_id = 4; ++#endif ++ ++ ++ if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ if(pparm->algorithm == _NO_PRIVACY_) // clear cam entry ++ { ++ clear_cam_entry(padapter, pparm->id); ++ return H2C_SUCCESS_RSP; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, pparm->addr); ++ if(psta) ++ { ++ ctrl = (BIT(15) | ((pparm->algorithm) << 2)); ++ ++ DBG_871X("r871x_set_stakey_hdl(): enc_algorithm=%d\n", pparm->algorithm); ++ ++ if((psta->mac_id<1) || (psta->mac_id>(NUM_STA-4))) ++ { ++ DBG_871X("r871x_set_stakey_hdl():set_stakey failed, mac_id(aid)=%d\n", psta->mac_id); ++ return H2C_REJECTED; ++ } ++ ++ cam_id = (psta->mac_id + 3);//0~3 for default key, cmd_id=macid + 3, macid=aid+1; ++ ++ DBG_871X("Write CAM, mac_addr=%x:%x:%x:%x:%x:%x, cam_entry=%d\n", pparm->addr[0], ++ pparm->addr[1], pparm->addr[2], pparm->addr[3], pparm->addr[4], ++ pparm->addr[5], cam_id); ++ ++ write_cam(padapter, cam_id, ctrl, pparm->addr, pparm->key); ++ ++ return H2C_SUCCESS_RSP; ++ ++ } ++ else ++ { ++ DBG_871X("r871x_set_stakey_hdl(): sta has been free\n"); ++ return H2C_REJECTED; ++ } ++ ++ } ++ ++ //below for sta mode ++ ++ if(pparm->algorithm == _NO_PRIVACY_) // clear cam entry ++ { ++ clear_cam_entry(padapter, pparm->id); ++ return H2C_SUCCESS; ++ } ++ ++ ctrl = BIT(15) | ((pparm->algorithm) << 2); ++ ++#ifdef CONFIG_TDLS ++ if(ptdlsinfo->clear_cam!=0){ ++ clear_cam_entry(padapter, ptdlsinfo->clear_cam); ++ ptdlsinfo->clear_cam=0; ++ ++ return H2C_SUCCESS; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, pparm->addr);//Get TDLS Peer STA ++ if( psta->tdls_sta_state&TDLS_LINKED_STATE ){ ++ write_cam(padapter, psta->mac_id, ctrl, pparm->addr, pparm->key); ++ } ++ else ++#endif //CONFIG_TDLS ++ write_cam(padapter, cam_id, ctrl, pparm->addr, pparm->key); ++ ++ pmlmeinfo->enc_algo = pparm->algorithm; ++ ++ return H2C_SUCCESS; ++} ++ ++u8 add_ba_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct addBaReq_parm *pparm = (struct addBaReq_parm *)pbuf; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, pparm->addr); ++ ++ if(!psta) ++ return H2C_SUCCESS; ++ ++ ++ if (((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && (pmlmeinfo->HT_enable)) || ++ ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //pmlmeinfo->ADDBA_retry_count = 0; ++ //pmlmeinfo->candidate_tid_bitmap |= (0x1 << pparm->tid); ++ //psta->htpriv.candidate_tid_bitmap |= BIT(pparm->tid); ++ issue_action_BA(padapter, pparm->addr, RTW_WLAN_ACTION_ADDBA_REQ, (u16)pparm->tid); ++ //_set_timer(&pmlmeext->ADDBA_timer, ADDBA_TO); ++ _set_timer(&psta->addba_retry_timer, ADDBA_TO); ++ } ++#ifdef CONFIG_TDLS ++ else if((psta->tdls_sta_state & TDLS_LINKED_STATE)&& ++ (psta->htpriv.ht_option==_TRUE) && ++ (psta->htpriv.ampdu_enable==_TRUE) ) ++ { ++ issue_action_BA(padapter, pparm->addr, RTW_WLAN_ACTION_ADDBA_REQ, (u16)pparm->tid); ++ //_set_timer(&pmlmeext->ADDBA_timer, ADDBA_TO); ++ _set_timer(&psta->addba_retry_timer, ADDBA_TO); ++ } ++#endif //CONFIG ++ else ++ { ++ psta->htpriv.candidate_tid_bitmap &= ~BIT(pparm->tid); ++ } ++ ++ return H2C_SUCCESS; ++} ++ ++u8 set_tx_beacon_cmd(_adapter* padapter) ++{ ++ struct cmd_obj *ph2c; ++ struct Tx_Beacon_param *ptxBeacon_parm; ++ struct cmd_priv *pcmdpriv = &(padapter->cmdpriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 res = _SUCCESS; ++ int len_diff = 0; ++ ++_func_enter_; ++ ++ if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ res= _FAIL; ++ goto exit; ++ } ++ ++ if ((ptxBeacon_parm = (struct Tx_Beacon_param *)rtw_zmalloc(sizeof(struct Tx_Beacon_param))) == NULL) ++ { ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memcpy(&(ptxBeacon_parm->network), &(pmlmeinfo->network), sizeof(WLAN_BSSID_EX)); ++ ++ len_diff = update_hidden_ssid( ++ ptxBeacon_parm->network.IEs+_BEACON_IE_OFFSET_ ++ , ptxBeacon_parm->network.IELength-_BEACON_IE_OFFSET_ ++ , pmlmeinfo->hidden_ssid_mode ++ ); ++ ptxBeacon_parm->network.IELength += len_diff; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, ptxBeacon_parm, GEN_CMD_CODE(_TX_Beacon)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++ ++u8 mlme_evt_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ u8 evt_code, evt_seq; ++ u16 evt_sz; ++ uint *peventbuf; ++ void (*event_callback)(_adapter *dev, u8 *pbuf); ++ struct evt_priv *pevt_priv = &(padapter->evtpriv); ++ ++ peventbuf = (uint*)pbuf; ++ evt_sz = (u16)(*peventbuf&0xffff); ++ evt_seq = (u8)((*peventbuf>>24)&0x7f); ++ evt_code = (u8)((*peventbuf>>16)&0xff); ++ ++ ++ #ifdef CHECK_EVENT_SEQ ++ // checking event sequence... ++ if (evt_seq != (ATOMIC_READ(&pevt_priv->event_seq) & 0x7f) ) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("Evetn Seq Error! %d vs %d\n", (evt_seq & 0x7f), (ATOMIC_READ(&pevt_priv->event_seq) & 0x7f))); ++ ++ pevt_priv->event_seq = (evt_seq+1)&0x7f; ++ ++ goto _abort_event_; ++ } ++ #endif ++ ++ // checking if event code is valid ++ if (evt_code >= MAX_C2HEVT) ++ { ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nEvent Code(%d) mismatch!\n", evt_code)); ++ goto _abort_event_; ++ } ++ ++ // checking if event size match the event parm size ++ if ((wlanevents[evt_code].parmsize != 0) && ++ (wlanevents[evt_code].parmsize != evt_sz)) ++ { ++ ++ RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", ++ evt_code, wlanevents[evt_code].parmsize, evt_sz)); ++ goto _abort_event_; ++ ++ } ++ ++ ATOMIC_INC(&pevt_priv->event_seq); ++ ++ peventbuf += 2; ++ ++ if(peventbuf) ++ { ++ event_callback = wlanevents[evt_code].event_callback; ++ event_callback(padapter, (u8*)peventbuf); ++ ++ pevt_priv->evt_done_cnt++; ++ } ++ ++ ++_abort_event_: ++ ++ ++ return H2C_SUCCESS; ++ ++} ++ ++u8 h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ return H2C_SUCCESS; ++} ++ ++u8 tx_beacon_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ if(send_beacon(padapter)==_FAIL) ++ { ++ DBG_871X("issue_beacon, fail!\n"); ++ return H2C_PARAMETERS_ERROR; ++ } ++#ifdef CONFIG_AP_MODE ++ else //tx bc/mc frames after update TIM ++ { ++ _irqL irqL; ++ struct sta_info *psta_bmc; ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //for BC/MC Frames ++ psta_bmc = rtw_get_bcmc_stainfo(padapter); ++ if(!psta_bmc) ++ return H2C_SUCCESS; ++ ++ if((pstapriv->tim_bitmap&BIT(0)) && (psta_bmc->sleepq_len>0)) ++ { ++#ifndef CONFIG_PCI_HCI ++ rtw_msleep_os(10);// 10ms, ATIM(HIQ) Windows ++#endif ++ //_enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&psta_bmc->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ psta_bmc->sleepq_len--; ++ if(psta_bmc->sleepq_len>0) ++ pxmitframe->attrib.mdata = 1; ++ else ++ pxmitframe->attrib.mdata = 0; ++ ++ pxmitframe->attrib.triggered=1; ++ ++ pxmitframe->attrib.qsel = 0x11;//HIQ ++ ++#if 0 ++ _exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ } ++ _enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ ++#endif ++ rtw_hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ //pstapriv->tim_bitmap &= ~BIT(0); ++ ++ } ++ ++ //_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ } ++ ++ } ++#endif ++ ++ return H2C_SUCCESS; ++ ++} ++ ++void change_band_update_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork) ++{ ++ u8 network_type,rate_len, total_rate_len,remainder_rate_len; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 erpinfo=0x4; ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if(pmlmeext->cur_channel >= 36) ++ { ++ network_type = WIRELESS_11A; ++ total_rate_len = IEEE80211_NUM_OFDM_RATESLEN; ++ DBG_871X("%s(): change to 5G Band\n",__FUNCTION__); ++ rtw_remove_bcn_ie(padapter, pnetwork, _ERPINFO_IE_); ++ } ++ else ++ { ++ network_type = WIRELESS_11BG; ++ total_rate_len = IEEE80211_CCK_RATE_LEN+IEEE80211_NUM_OFDM_RATESLEN; ++ DBG_871X("%s(): change to 2.4G Band\n",__FUNCTION__); ++ rtw_add_bcn_ie(padapter, pnetwork, _ERPINFO_IE_, &erpinfo, 1); ++ } ++ ++ rtw_set_supported_rate(pnetwork->SupportedRates, network_type); ++ ++ UpdateBrateTbl(padapter, pnetwork->SupportedRates); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates); ++ ++ if(total_rate_len > 8) ++ { ++ rate_len = 8; ++ remainder_rate_len = total_rate_len - 8; ++ } ++ else ++ { ++ rate_len = total_rate_len; ++ remainder_rate_len = 0; ++ } ++ ++ rtw_add_bcn_ie(padapter, pnetwork, _SUPPORTEDRATES_IE_, pnetwork->SupportedRates, rate_len); ++ ++ if(remainder_rate_len) ++ { ++ rtw_add_bcn_ie(padapter, pnetwork, _EXT_SUPPORTEDRATES_IE_, (pnetwork->SupportedRates+8), remainder_rate_len); ++ } ++ else ++ { ++ rtw_remove_bcn_ie(padapter, pnetwork, _EXT_SUPPORTEDRATES_IE_); ++ } ++} ++ ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++void dc_SelectChannel(_adapter *padapter, unsigned char channel) ++{ ++ PADAPTER ptarget_adapter; ++ ++ if( (padapter->pbuddy_adapter != NULL) && ++ (padapter->DualMacConcurrent == _TRUE) && ++ (padapter->adapter_type == SECONDARY_ADAPTER)) ++ { ++ // only mac0 could control BB&RF ++ ptarget_adapter = padapter->pbuddy_adapter; ++ } ++ else ++ { ++ ptarget_adapter = padapter; ++ } ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setch_mutex), NULL); ++ ++ rtw_hal_set_chan(ptarget_adapter, channel); ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setch_mutex), NULL); ++} ++ ++void dc_SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset) ++{ ++ PADAPTER ptarget_adapter; ++ ++ if( (padapter->pbuddy_adapter != NULL) && ++ (padapter->DualMacConcurrent == _TRUE) && ++ (padapter->adapter_type == SECONDARY_ADAPTER)) ++ { ++ // only mac0 could control BB&RF ++ ptarget_adapter = padapter->pbuddy_adapter; ++ } ++ else ++ { ++ ptarget_adapter = padapter; ++ } ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setbw_mutex), NULL); ++ ++ rtw_hal_set_bwmode(ptarget_adapter, (HT_CHANNEL_WIDTH)bwmode, channel_offset); ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setbw_mutex), NULL); ++} ++ ++void dc_set_channel_bwmode_disconnect(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ if((check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) != _TRUE) ++ { ++ //switch to the 20M Hz mode after disconnect ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++ } ++ else ++ { ++ //switch to the 20M Hz mode after disconnect ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++} ++ ++u8 dc_handle_join_request(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network)); ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = NULL; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ u8 ret = _SUCCESS; ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ ++ if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel || ++ pmlmeext->cur_bwmode != pbuddy_mlmeext->cur_bwmode || ++ pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset) ++ { ++ if((check_fwstate(pbuddy_mlmepriv, WIFI_AP_STATE)) == _TRUE) ++ { ++ //issue deauth to all stas if if2 is at ap mode ++ rtw_sta_flush(pbuddy_adapter); ++ ++ //rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0); ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_CHECK_TXBUF, 0); ++ } ++ else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED) == _TRUE) ++ { ++ if(pmlmeext->cur_channel == pbuddy_mlmeext->cur_channel) ++ { ++ // HT_CHANNEL_WIDTH_40 or HT_CHANNEL_WIDTH_20 but channel offset is different ++ if((pmlmeext->cur_bwmode == pbuddy_mlmeext->cur_bwmode) && ++ (pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset) ) ++ { ++ report_join_res(padapter, -4); ++ ret = _FAIL; ++ } ++ } ++ else ++ { ++ report_join_res(padapter, -4); ++ ret = _FAIL; ++ } ++ } ++ } ++ else if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE) ++ { ++ issue_nulldata(pbuddy_adapter, NULL, 1, 0, 0); ++ } ++ } ++ ++ return ret; ++} ++ ++void dc_handle_join_done(_adapter *padapter, u8 join_res) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ struct mlme_ext_priv *pbuddy_mlmeext = NULL; ++ struct mlme_ext_info *pbuddy_mlmeinfo = NULL; ++ WLAN_BSSID_EX *pbuddy_network_mlmeext = NULL; ++ u8 change_band = _FALSE; ++ ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info); ++ pbuddy_network_mlmeext = &(pbuddy_mlmeinfo->network); ++ ++ if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) ++ { ++ //restart and update beacon ++ DBG_871X("after join, current adapter, CH=%d, BW=%d, offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset); ++ ++ if(join_res >= 0) ++ { ++ u8 *p; ++ int ie_len; ++ struct HT_info_element *pht_info=NULL; ++ ++ if((pbuddy_mlmeext->cur_channel <= 14 && pmlmeext->cur_channel >= 36) || ++ (pbuddy_mlmeext->cur_channel >= 36 && pmlmeext->cur_channel <= 14)) ++ { ++ change_band = _TRUE; ++ } ++ ++ //sync channel/bwmode/ch_offset with another adapter ++ pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel; ++ ++ if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ pht_info->infos[0] &= ~(BIT(0)|BIT(1)); //no secondary channel is present ++ } ++ ++ if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ pbuddy_mlmeext->cur_ch_offset = pmlmeext->cur_ch_offset; ++ ++ //to update cur_ch_offset value in beacon ++ if( pht_info ) ++ { ++ switch(pmlmeext->cur_ch_offset) ++ { ++ case HAL_PRIME_CHNL_OFFSET_LOWER: ++ pht_info->infos[0] |= 0x1; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_UPPER: ++ pht_info->infos[0] |= 0x3; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_DONT_CARE: ++ default: ++ break; ++ } ++ } ++ } ++ else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) ++ { ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ if(pmlmeext->cur_channel>0 && pmlmeext->cur_channel<5) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x1; ++ ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ } ++ ++ if(pmlmeext->cur_channel>7 && pmlmeext->cur_channel<(14+1)) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x3; ++ ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ } ++ ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ } ++ } ++ ++ // to update channel value in beacon ++ pbuddy_network_mlmeext->Configuration.DSConfig = pmlmeext->cur_channel; ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if(p && ie_len>0) ++ *(p + 2) = pmlmeext->cur_channel; ++ ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ pht_info->primary_channel = pmlmeext->cur_channel; ++ } ++ ++ // update mlmepriv's cur_network ++ _rtw_memcpy(&pbuddy_mlmepriv->cur_network.network, pbuddy_network_mlmeext, pbuddy_network_mlmeext->Length); ++ } ++ else ++ { ++ // switch back to original channel/bwmode/ch_offset; ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ } ++ ++ DBG_871X("after join, another adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ ++ if(change_band == _TRUE) ++ change_band_update_ie(pbuddy_adapter, pbuddy_network_mlmeext); ++ ++ DBG_871X("update pbuddy_adapter's beacon\n"); ++ ++ update_beacon(pbuddy_adapter, 0, NULL, _TRUE); ++ } ++ else if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE) ++ { ++ if((pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) && ++ (pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20)) ++ { ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ } ++ ++ issue_nulldata(pbuddy_adapter, NULL, 0, 0, 0); ++ } ++ } ++} ++ ++sint dc_check_fwstate(_adapter *padapter, sint fw_state) ++{ ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ ++ if(padapter->pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ ++ return check_fwstate(pbuddy_mlmepriv, fw_state); ++ } ++ ++ return _FALSE; ++} ++ ++u8 dc_handle_site_survey(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ ++ // only mac0 can do scan request, help issue nulldata(1) for mac1 ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE) ++ { ++ pmlmeext->sitesurvey_res.state = SCAN_TXNULL; ++ ++ issue_nulldata(pbuddy_adapter, NULL, 1, 2, 0); ++ ++ return _TRUE; ++ } ++ } ++ ++ return _FALSE; ++} ++ ++void dc_report_survey_event(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ if(padapter->pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ report_survey_event(padapter->pbuddy_adapter, precv_frame); ++ } ++} ++ ++void dc_set_channel_bwmode_survey_done(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ struct mlme_ext_priv *pbuddy_mlmeext = NULL; ++ struct mlme_ext_info *pbuddy_mlmeinfo = NULL; ++ u8 cur_channel; ++ u8 cur_bwmode; ++ u8 cur_ch_offset; ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info); ++ ++ if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED) && ++ (pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)) ++ { ++ cur_channel = pmlmeext->cur_channel; ++ cur_bwmode = pmlmeext->cur_bwmode; ++ cur_ch_offset = pmlmeext->cur_ch_offset; ++ } ++ else ++ { ++ cur_channel = pbuddy_mlmeext->cur_channel; ++ cur_bwmode = pbuddy_mlmeext->cur_bwmode; ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ } ++ } ++ else ++ { ++ cur_channel = pmlmeext->cur_channel; ++ cur_bwmode = pmlmeext->cur_bwmode; ++ cur_ch_offset = pmlmeext->cur_ch_offset; ++ } ++ ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ ++ if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE) ++ { ++ //issue null data ++ issue_nulldata(pbuddy_adapter, NULL, 0, 0, 0); ++ } ++ ++ if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) ++ { ++ ++ DBG_871X("survey done, current CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ DBG_871X("restart pbuddy_adapter's beacon\n"); ++ ++ update_beacon(pbuddy_adapter, 0, NULL, _TRUE); ++ } ++ } ++ else ++ { ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++} ++ ++void dc_set_ap_channel_bandwidth(_adapter *padapter, u8 channel, u8 channel_offset, u8 bwmode) ++{ ++ u8 *p; ++ u8 val8, cur_channel, cur_bwmode, cur_ch_offset, change_band; ++ int ie_len; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct HT_info_element *pht_info=NULL; ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ struct mlme_ext_priv *pbuddy_mlmeext = NULL; ++ ++ DBG_871X("dualmac_concurrent_ap_set_channel_bwmode ==>\n"); ++ ++ cur_channel = channel; ++ cur_bwmode = bwmode; ++ cur_ch_offset = channel_offset; ++ change_band = _FALSE; ++ ++ p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ } ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ if(!check_fwstate(pbuddy_mlmepriv, _FW_LINKED|_FW_UNDER_LINKING|_FW_UNDER_SURVEY)) ++ { ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ } ++ else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED)==_TRUE) ++ { ++ //To sync cur_channel/cur_bwmode/cur_ch_offset with another adapter ++ DBG_871X("Another iface is at linked state, sync cur_channel/cur_bwmode/cur_ch_offset\n"); ++ DBG_871X("Another adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ DBG_871X("Current adapter, CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ cur_channel = pbuddy_mlmeext->cur_channel; ++ if(cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ if(pht_info) ++ pht_info->infos[0] &= ~(BIT(0)|BIT(1)); ++ ++ if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ ++ //to update cur_ch_offset value in beacon ++ if(pht_info) ++ { ++ switch(cur_ch_offset) ++ { ++ case HAL_PRIME_CHNL_OFFSET_LOWER: ++ pht_info->infos[0] |= 0x1; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_UPPER: ++ pht_info->infos[0] |= 0x3; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_DONT_CARE: ++ default: ++ break; ++ } ++ } ++ } ++ else if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) ++ { ++ cur_bwmode = HT_CHANNEL_WIDTH_20; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ if(cur_channel>0 && cur_channel<5) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x1; ++ ++ cur_bwmode = HT_CHANNEL_WIDTH_40; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ } ++ ++ if(cur_channel>7 && cur_channel<(14+1)) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= 0x3; ++ ++ cur_bwmode = HT_CHANNEL_WIDTH_40; ++ cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ } ++ ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ } ++ } ++ ++ // to update channel value in beacon ++ pnetwork->Configuration.DSConfig = cur_channel; ++ p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if(p && ie_len>0) ++ *(p + 2) = cur_channel; ++ ++ if(pht_info) ++ pht_info->primary_channel = cur_channel; ++ } ++ } ++ else ++ { ++ set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode); ++ } ++ ++ DBG_871X("CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset); ++ ++ if((channel <= 14 && cur_channel >= 36) || ++ (channel >= 36 && cur_channel <= 14)) ++ { ++ change_band = _TRUE; ++ } ++ ++ pmlmeext->cur_channel = cur_channel; ++ pmlmeext->cur_bwmode = cur_bwmode; ++ pmlmeext->cur_ch_offset = cur_ch_offset; ++ ++ if(change_band == _TRUE) ++ change_band_update_ie(padapter, pnetwork); ++ ++ DBG_871X("dualmac_concurrent_ap_set_channel_bwmode <==\n"); ++} ++ ++void dc_resume_xmit(_adapter *padapter) ++{ ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ DBG_871X("dc_resume_xmit, resume pbuddy_adapter Tx\n"); ++ rtw_os_xmit_schedule(pbuddy_adapter); ++ } ++} ++ ++u8 dc_check_xmit(_adapter *padapter) ++{ ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ ++ if(pbuddy_adapter != NULL && ++ padapter->DualMacConcurrent == _TRUE) ++ { ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ if (check_fwstate(pbuddy_mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ DBG_871X("dc_check_xmit pbuddy_adapter is under survey or under linking\n"); ++ return _FALSE; ++ } ++ } ++ ++ return _TRUE; ++} ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++sint check_buddy_mlmeinfo_state(_adapter *padapter, u32 state) ++{ ++ PADAPTER pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext; ++ struct mlme_ext_info *pbuddy_mlmeinfo; ++ ++ if(padapter == NULL) ++ return _FALSE; ++ ++ pbuddy_adapter = padapter->pbuddy_adapter; ++ ++ if(pbuddy_adapter == NULL) ++ return _FALSE; ++ ++ ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info); ++ ++ if((pbuddy_mlmeinfo->state&0x03) == state) ++ return _TRUE; ++ ++ return _FALSE; ++ ++} ++ ++void concurrent_chk_joinbss_done(_adapter *padapter, int join_res) ++{ ++ struct mlme_ext_priv *pmlmeext; ++ struct mlme_ext_info *pmlmeinfo; ++ PADAPTER pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext; ++ struct mlme_ext_info *pbuddy_mlmeinfo; ++ WLAN_BSSID_EX *pbuddy_network_mlmeext; ++ ++ pmlmeext = &padapter->mlmeextpriv; ++ pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ ++ if(!rtw_buddy_adapter_up(padapter)) ++ { ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ return; ++ } ++ ++ pbuddy_adapter = padapter->pbuddy_adapter; ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info); ++ pbuddy_network_mlmeext = &(pbuddy_mlmeinfo->network); ++ ++ if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) && ++ check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) ++ { ++ //restart and update beacon ++ ++ DBG_871X("after join,primary adapter, CH=%d, BW=%d, offset=%d\n" ++ , pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset); ++ ++ ++ if(join_res >= 0) ++ { ++ u8 *p; ++ int ie_len; ++ u8 change_band = _FALSE; ++ struct HT_info_element *pht_info=NULL; ++ ++ if((pmlmeext->cur_channel <= 14 && pbuddy_mlmeext->cur_channel >= 36) || ++ (pmlmeext->cur_channel >= 36 && pbuddy_mlmeext->cur_channel <= 14)) ++ change_band = _TRUE; ++ ++ //sync channel/bwmode/ch_offset with primary adapter ++ pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel; ++ if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ pht_info->infos[0] &= ~(BIT(0)|BIT(1)); //no secondary channel is present ++ } ++ ++ if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ { ++ pbuddy_mlmeext->cur_ch_offset = pmlmeext->cur_ch_offset; ++ ++ //to update cur_ch_offset value in beacon ++ if( pht_info ) ++ { ++ switch(pmlmeext->cur_ch_offset) ++ { ++ case HAL_PRIME_CHNL_OFFSET_LOWER: ++ pht_info->infos[0] |= 0x1; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_UPPER: ++ pht_info->infos[0] |= 0x3; ++ break; ++ case HAL_PRIME_CHNL_OFFSET_DONT_CARE: ++ default: ++ break; ++ } ++ ++ } ++ ++ } ++ else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) ++ { ++ if(pmlmeext->cur_channel>=1 && pmlmeext->cur_channel<=4) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE; ++ ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ } ++ else if(pmlmeext->cur_channel>=5 && pmlmeext->cur_channel<=14) ++ { ++ if(pht_info) ++ pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW; ++ ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ } ++ else ++ { ++ switch(pmlmeext->cur_channel) ++ { ++ case 36: ++ case 44: ++ case 52: ++ case 60: ++ case 100: ++ case 108: ++ case 116: ++ case 124: ++ case 132: ++ case 149: ++ case 157: ++ { ++ if(pht_info) ++ pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE; ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ } ++ case 40: ++ case 48: ++ case 56: ++ case 64: ++ case 104: ++ case 112: ++ case 120: ++ case 128: ++ case 136: ++ case 153: ++ case 161: ++ { ++ if(pht_info) ++ pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW; ++ ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ } ++ default: ++ if(pht_info) ++ pht_info->infos[0] &= ~HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW; ++ pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20; ++ pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ ++ } ++ ++ } ++ ++ } ++ ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ } ++ else ++ { ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++ ++ ++ // to update channel value in beacon ++ pbuddy_network_mlmeext->Configuration.DSConfig = pmlmeext->cur_channel; ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if(p && ie_len>0) ++ *(p + 2) = pmlmeext->cur_channel; ++ ++ p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs))); ++ if( p && ie_len) ++ { ++ pht_info = (struct HT_info_element *)(p+2); ++ pht_info->primary_channel = pmlmeext->cur_channel; ++ } ++ ++ //buddy interface band is different from current interface, update ERP, support rate, ext support rate IE ++ if(change_band == _TRUE) ++ change_band_update_ie(pbuddy_adapter, pbuddy_network_mlmeext); ++ } ++ else ++ { ++ // switch back to original channel/bwmode/ch_offset; ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ } ++ ++ DBG_871X("after join, second adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ ++ DBG_871X("update pbuddy_adapter's beacon\n"); ++ ++ update_beacon(pbuddy_adapter, 0, NULL, _TRUE); ++ ++ } ++ else if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) && ++ check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) ++ { ++ if(join_res >= 0) ++ { ++ pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel; ++ if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ else ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ else ++ { ++ // switch back to original channel/bwmode/ch_offset; ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ } ++ } ++ else ++ { ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ } ++ ++} ++#endif //CONFIG_CONCURRENT_MODE ++ ++int rtw_chk_start_clnt_join(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ unsigned char cur_ch = pmlmeext->cur_channel; ++ unsigned char cur_bw = pmlmeext->cur_bwmode; ++ unsigned char cur_ch_offset = pmlmeext->cur_ch_offset; ++ bool chbw_allow = _TRUE; ++ bool connect_allow = _TRUE; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext; ++ struct mlme_ext_info *pbuddy_pmlmeinfo; ++ struct mlme_priv *pbuddy_mlmepriv; ++ ++ if (!rtw_buddy_adapter_up(padapter)) { ++ goto start_join_set_ch_bw; ++ } ++ ++ pbuddy_adapter = padapter->pbuddy_adapter; ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ pbuddy_pmlmeinfo = &(pbuddy_mlmeext->mlmext_info); ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ ++ if((pbuddy_pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)//for AP MODE ++ { ++ DBG_871X("start_clnt_join: "ADPT_FMT"(ch=%d, bw=%d, ch_offset=%d)" ++ ", "ADPT_FMT" AP mode(ch=%d, bw=%d, ch_offset=%d)\n", ++ ADPT_ARG(padapter), pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset, ++ ADPT_ARG(pbuddy_adapter), pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ ++ if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel) ++ { ++ chbw_allow = _FALSE; ++ } ++ else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) && ++ (pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) && ++ (pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset)) ++ { ++ chbw_allow = _FALSE; ++ } ++ else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) && ++ (pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)) ++ { ++ cur_ch = pmlmeext->cur_channel; ++ cur_bw = pbuddy_mlmeext->cur_bwmode; ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ } ++ ++ DBG_871X("start_clnt_join: connect_allow:%d, chbw_allow:%d\n", connect_allow, chbw_allow); ++ if (chbw_allow == _FALSE) { ++ #ifdef CONFIG_SPCT_CH_SWITCH ++ if (1) { ++ rtw_ap_inform_ch_switch(pbuddy_adapter, pmlmeext->cur_channel , pmlmeext->cur_ch_offset); ++ } else ++ #endif ++ { ++ //issue deauth to all stas if if2 is at ap mode ++ rtw_sta_flush(pbuddy_adapter); ++ } ++ rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0); ++ } ++ } ++ else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED) == _TRUE && ++ check_fwstate(pbuddy_mlmepriv, WIFI_STATION_STATE) == _TRUE) //for Client Mode/p2p client ++ { ++ DBG_871X("start_clnt_join: "ADPT_FMT"(ch=%d, bw=%d, ch_offset=%d)" ++ ", "ADPT_FMT" STA mode(ch=%d, bw=%d, ch_offset=%d)\n", ++ ADPT_ARG(padapter), pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset, ++ ADPT_ARG(pbuddy_adapter), pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset); ++ ++ if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel) ++ { ++ chbw_allow = _FALSE; ++ } ++ else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) && ++ (pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)) ++ { ++ cur_bw = HT_CHANNEL_WIDTH_40; ++ cur_ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ } ++ else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) && ++ (pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) && ++ (pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset)) ++ { ++ chbw_allow = _FALSE; ++ } ++ ++ connect_allow = chbw_allow; ++ ++ #if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) ++ /* wlan0-sta mode has higher priority than p2p0-p2p client */ ++ if (!rtw_p2p_chk_state(&(pbuddy_adapter->wdinfo), P2P_STATE_NONE) ++ && pbuddy_adapter->wdinfo.driver_interface == DRIVER_CFG80211) ++ { ++ connect_allow = _TRUE; ++ } ++ #endif /* CONFIG_P2P && CONFIG_IOCTL_CFG80211 */ ++ ++ DBG_871X("start_clnt_join: connect_allow:%d, chbw_allow:%d\n", connect_allow, chbw_allow); ++ if (connect_allow == _TRUE && chbw_allow == _FALSE) { ++ /* disconnect buddy's connection */ ++ rtw_disassoc_cmd(pbuddy_adapter, 500, _FALSE); ++ rtw_indicate_disconnect(pbuddy_adapter); ++ rtw_free_assoc_resources(pbuddy_adapter, 1); ++ } ++ } ++ ++start_join_set_ch_bw: ++#endif /* CONFIG_CONCURRENT_MODE */ ++ ++ if (connect_allow == _TRUE) { ++ DBG_871X("start_join_set_ch_bw: ch=%d, bwmode=%d, ch_offset=%d\n", cur_ch, cur_bw, cur_ch_offset); ++ set_channel_bwmode(padapter, cur_ch, cur_ch_offset, cur_bw); ++ } ++ ++ return connect_allow == _TRUE ? _SUCCESS : _FAIL; ++} ++ ++/* Find union about ch, bw, ch_offset of all linked interfaces */ ++int rtw_get_ch_setting_union(_adapter *adapter, u8 *ch, u8 *bw, u8 *offset) ++{ ++ struct dvobj_priv *dvobj = adapter_to_dvobj(adapter); ++ _adapter *iface; ++ struct mlme_ext_priv *mlmeext; ++ int i; ++ u8 ch_ret = 0; ++ u8 bw_ret = HT_CHANNEL_WIDTH_20; ++ u8 offset_ret = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ int num = 0; ++ ++ if (ch) *ch = 0; ++ if (bw) *bw = HT_CHANNEL_WIDTH_20; ++ if (offset) *offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ for (i = 0; iiface_nums; i++) { ++ iface = dvobj->padapters[i]; ++ mlmeext = &iface->mlmeextpriv; ++ ++ if (!check_fwstate(&iface->mlmepriv, _FW_LINKED)) ++ continue; ++ ++ if (num == 0) { ++ ch_ret = mlmeext->cur_channel; ++ bw_ret = mlmeext->cur_bwmode; ++ offset_ret = mlmeext->cur_ch_offset; ++ num++; ++ continue; ++ } ++ ++ if (ch_ret != mlmeext->cur_channel) { ++ num = 0; ++ break; ++ } ++ ++ if (bw_ret < mlmeext->cur_bwmode) { ++ bw_ret = mlmeext->cur_bwmode; ++ offset_ret = mlmeext->cur_ch_offset; ++ } else if (bw_ret == mlmeext->cur_bwmode && offset_ret != mlmeext->cur_ch_offset) { ++ num = 0; ++ break; ++ } ++ ++ num++; ++ } ++ ++ if (num) { ++ if (ch) *ch = ch_ret; ++ if (bw) *bw = bw_ret; ++ if (offset) *offset = offset_ret; ++ } ++ ++ return num; ++} ++ ++u8 set_ch_hdl(_adapter *padapter, u8 *pbuf) ++{ ++ struct set_ch_parm *set_ch_parm; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ set_ch_parm = (struct set_ch_parm *)pbuf; ++ ++ DBG_871X(FUNC_NDEV_FMT" ch:%u, bw:%u, ch_offset:%u\n", ++ FUNC_NDEV_ARG(padapter->pnetdev), ++ set_ch_parm->ch, set_ch_parm->bw, set_ch_parm->ch_offset); ++ ++ pmlmeext->cur_channel = set_ch_parm->ch; ++ pmlmeext->cur_ch_offset = set_ch_parm->ch_offset; ++ pmlmeext->cur_bwmode = set_ch_parm->bw; ++ ++ set_channel_bwmode(padapter, set_ch_parm->ch, set_ch_parm->ch_offset, set_ch_parm->bw); ++ ++ return H2C_SUCCESS; ++} ++ ++u8 set_chplan_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct SetChannelPlan_param *setChannelPlan_param; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ setChannelPlan_param = (struct SetChannelPlan_param *)pbuf; ++ ++ pmlmeext->max_chan_nums = init_channel_set(padapter, setChannelPlan_param->channel_plan, pmlmeext->channel_set); ++ init_channel_list(padapter, pmlmeext->channel_set, pmlmeext->max_chan_nums, &pmlmeext->channel_list); ++ ++ return H2C_SUCCESS; ++} ++ ++u8 led_blink_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ struct LedBlink_param *ledBlink_param; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ ledBlink_param = (struct LedBlink_param *)pbuf; ++ ++ #ifdef CONFIG_LED_HANDLED_BY_CMD_THREAD ++ BlinkHandler(ledBlink_param->pLed); ++ #endif ++ ++ return H2C_SUCCESS; ++} ++ ++u8 set_csa_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++#ifdef CONFIG_DFS ++ struct SetChannelSwitch_param *setChannelSwitch_param; ++ struct SetChannelPlan_param *setChannelPlan_param; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; ++ u8 new_ch_no; ++ u8 gval8 = 0x00, sval8 = 0xff; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ setChannelSwitch_param = (struct SetChannelSwitch_param *)pbuf; ++ new_ch_no = setChannelSwitch_param->new_ch_no; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_TXPAUSE, &gval8); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, &sval8); ++ ++ DBG_871X("DFS detected! Swiching channel to %d!\n", new_ch_no); ++ SelectChannel(padapter, new_ch_no); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, &gval8); ++ ++ rtw_free_network_queue(padapter, _TRUE); ++ rtw_indicate_disconnect(padapter); ++ ++ if ( ((new_ch_no >= 52) && (new_ch_no <= 64)) ||((new_ch_no >= 100) && (new_ch_no <= 140)) ) { ++ DBG_871X("Switched to DFS band (ch %02x) again!!\n", new_ch_no); ++ } ++ ++ return H2C_SUCCESS; ++#else ++ return H2C_REJECTED; ++#endif //CONFIG_DFS ++ ++} ++ ++// TDLS_WRCR : write RCR DATA BIT ++// TDLS_SD_PTI : issue peer traffic indication ++// TDLS_CS_OFF : go back to the channel linked with AP, terminating channel switch procedure ++// TDLS_INIT_CH_SEN : init channel sensing, receive all data and mgnt frame ++// TDLS_DONE_CH_SEN: channel sensing and report candidate channel ++// TDLS_OFF_CH : first time set channel to off channel ++// TDLS_BASE_CH : go back tp the channel linked with AP when set base channel as target channel ++// TDLS_P_OFF_CH : periodically go to off channel ++// TDLS_P_BASE_CH : periodically go back to base channel ++// TDLS_RS_RCR : restore RCR ++// TDLS_CKALV_PH1 : check alive timer phase1 ++// TDLS_CKALV_PH2 : check alive timer phase2 ++// TDLS_FREE_STA : free tdls sta ++u8 tdls_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++#ifdef CONFIG_TDLS ++ _irqL irqL; ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct TDLSoption_param *TDLSoption; ++ struct sta_info *ptdls_sta; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; ++ u8 survey_channel, i, min, option; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ TDLSoption = (struct TDLSoption_param *)pbuf; ++ ++ ptdls_sta = rtw_get_stainfo( &(padapter->stapriv), TDLSoption->addr ); ++ option = TDLSoption->option; ++ ++ if( ptdls_sta == NULL ) ++ { ++ if( option != TDLS_RS_RCR ) ++ return H2C_REJECTED; ++ } ++ ++ //_enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL); ++ DBG_871X("[%s] option:%d\n", __FUNCTION__, option); ++ ++ switch(option){ ++ case TDLS_WRCR: ++ //As long as TDLS handshake success, we should set RCR_CBSSID_DATA bit to 0 ++ //such we can receive all kinds of data frames. ++ rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_WRCR, 0); ++ DBG_871X("TDLS with "MAC_FMT"\n", MAC_ARG(ptdls_sta->hwaddr)); ++ ++ pmlmeinfo->FW_sta_info[ptdls_sta->mac_id].psta = ptdls_sta; ++ //set TDLS sta rate. ++ set_sta_rate(padapter, ptdls_sta); ++ break; ++ case TDLS_SD_PTI: ++ issue_tdls_peer_traffic_indication(padapter, ptdls_sta); ++ break; ++ case TDLS_CS_OFF: ++ _cancel_timer_ex(&ptdls_sta->base_ch_timer); ++ _cancel_timer_ex(&ptdls_sta->off_ch_timer); ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SWITCH_ON_STATE | ++ TDLS_PEER_AT_OFF_STATE | ++ TDLS_AT_OFF_CH_STATE); ++ DBG_871X("go back to base channel\n "); ++ issue_nulldata(padapter, NULL, 0, 0, 0); ++ break; ++ case TDLS_INIT_CH_SEN: ++ rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_INIT_CH_SEN, 0); ++ pmlmeext->sitesurvey_res.channel_idx = 0; ++ ptdls_sta->option = TDLS_DONE_CH_SEN; ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_DONE_CH_SEN); ++ break; ++ case TDLS_DONE_CH_SEN: ++ survey_channel = pmlmeext->channel_set[pmlmeext->sitesurvey_res.channel_idx].ChannelNum; ++ if(survey_channel){ ++ SelectChannel(padapter, survey_channel); ++ ptdlsinfo->cur_channel = survey_channel; ++ pmlmeext->sitesurvey_res.channel_idx++; ++ _set_timer(&ptdls_sta->option_timer, SURVEY_TO); ++ }else{ ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_DONE_CH_SEN, 0); ++ ++ if(ptdlsinfo->ch_sensing==1){ ++ ptdlsinfo->ch_sensing=0; ++ ptdlsinfo->cur_channel=1; ++ min=ptdlsinfo->collect_pkt_num[0]; ++ for(i=1; i ptdlsinfo->collect_pkt_num[i]){ ++ ptdlsinfo->cur_channel=i+1; ++ min=ptdlsinfo->collect_pkt_num[i]; ++ } ++ ptdlsinfo->collect_pkt_num[i]=0; ++ } ++ ptdlsinfo->collect_pkt_num[0]=0; ++ ptdlsinfo->candidate_ch=ptdlsinfo->cur_channel; ++ DBG_871X("TDLS channel sensing done, candidate channel: %02x\n", ptdlsinfo->candidate_ch); ++ ptdlsinfo->cur_channel=0; ++ ++ } ++ ++ if(ptdls_sta->tdls_sta_state & TDLS_PEER_SLEEP_STATE){ ++ ptdls_sta->tdls_sta_state |= TDLS_APSD_CHSW_STATE; ++ }else{ ++ //send null data with pwrbit==1 before send ch_switching_req to peer STA. ++ issue_nulldata(padapter, NULL, 1, 0, 0); ++ ++ ptdls_sta->tdls_sta_state |= TDLS_CH_SW_INITIATOR_STATE; ++ ++ issue_tdls_ch_switch_req(padapter, ptdls_sta->hwaddr); ++ DBG_871X("issue tdls ch switch req\n"); ++ } ++ } ++ break; ++ case TDLS_OFF_CH: ++ issue_nulldata(padapter, NULL, 1, 0, 0); ++ SelectChannel(padapter, ptdls_sta->off_ch); ++ ++ DBG_871X("change channel to tar ch:%02x\n", ptdls_sta->off_ch); ++ ptdls_sta->tdls_sta_state |= TDLS_AT_OFF_CH_STATE; ++ ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_AT_OFF_STATE); ++ _set_timer(&ptdls_sta->option_timer, (u32)ptdls_sta->ch_switch_time); ++ break; ++ case TDLS_BASE_CH: ++ _cancel_timer_ex(&ptdls_sta->base_ch_timer); ++ _cancel_timer_ex(&ptdls_sta->off_ch_timer); ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SWITCH_ON_STATE | ++ TDLS_PEER_AT_OFF_STATE | ++ TDLS_AT_OFF_CH_STATE); ++ DBG_871X("go back to base channel\n "); ++ issue_nulldata(padapter, NULL, 0, 0, 0); ++ _set_timer(&ptdls_sta->option_timer, (u32)ptdls_sta->ch_switch_time); ++ break; ++ case TDLS_P_OFF_CH: ++ SelectChannel(padapter, pmlmeext->cur_channel); ++ issue_nulldata(padapter, NULL, 0, 0, 0); ++ DBG_871X("change channel to base ch:%02x\n", pmlmeext->cur_channel); ++ ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_AT_OFF_STATE| TDLS_AT_OFF_CH_STATE); ++ _set_timer(&ptdls_sta->off_ch_timer, TDLS_STAY_TIME); ++ break; ++ case TDLS_P_BASE_CH: ++ issue_nulldata(ptdls_sta->padapter, NULL, 1, 0, 0); ++ SelectChannel(padapter, ptdls_sta->off_ch); ++ DBG_871X("change channel to off ch:%02x\n", ptdls_sta->off_ch); ++ ptdls_sta->tdls_sta_state |= TDLS_AT_OFF_CH_STATE; ++ if((ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE) != TDLS_PEER_AT_OFF_STATE){ ++ issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0); ++ } ++ _set_timer(&ptdls_sta->base_ch_timer, TDLS_STAY_TIME); ++ break; ++ case TDLS_RS_RCR: ++ rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_RS_RCR, 0); ++ DBG_871X("wirte REG_RCR, set bit6 on\n"); ++ break; ++ case TDLS_CKALV_PH1: ++ _set_timer(&ptdls_sta->alive_timer2, TDLS_ALIVE_TIMER_PH2); ++ break; ++ case TDLS_CKALV_PH2: ++ _set_timer(&ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1); ++ break; ++ case TDLS_FREE_STA: ++ free_tdls_sta(padapter, ptdls_sta); ++ break; ++ ++ } ++ ++ //_exit_critical_bh(&(ptdlsinfo->hdl_lock), &irqL); ++ ++ return H2C_SUCCESS; ++#else ++ return H2C_REJECTED; ++#endif //CONFIG_TDLS ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp.c +new file mode 100644 +index 000000000000..269542526a70 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp.c +@@ -0,0 +1,1323 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_MP_C_ ++ ++#include ++ ++#ifdef PLATFORM_FREEBSD ++#include /* for RFHIGHPID */ ++#endif ++ ++#ifdef CONFIG_RTL8712 ++#include ++#endif ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++#ifdef CONFIG_RTL8192D ++#include ++#endif ++#ifdef CONFIG_RTL8723A ++#include ++#endif ++ ++ ++#ifdef CONFIG_MP_INCLUDED ++ ++u32 read_macreg(_adapter *padapter, u32 addr, u32 sz) ++{ ++ u32 val = 0; ++ ++ switch(sz) ++ { ++ case 1: ++ val = rtw_read8(padapter, addr); ++ break; ++ case 2: ++ val = rtw_read16(padapter, addr); ++ break; ++ case 4: ++ val = rtw_read32(padapter, addr); ++ break; ++ default: ++ val = 0xffffffff; ++ break; ++ } ++ ++ return val; ++ ++} ++ ++void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz) ++{ ++ switch(sz) ++ { ++ case 1: ++ rtw_write8(padapter, addr, (u8)val); ++ break; ++ case 2: ++ rtw_write16(padapter, addr, (u16)val); ++ break; ++ case 4: ++ rtw_write32(padapter, addr, val); ++ break; ++ default: ++ break; ++ } ++ ++} ++ ++u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask) ++{ ++ return rtw_hal_read_bbreg(padapter, addr, bitmask); ++} ++ ++void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val) ++{ ++ rtw_hal_write_bbreg(padapter, addr, bitmask, val); ++} ++ ++u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask) ++{ ++ return rtw_hal_read_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bitmask); ++} ++ ++void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val) ++{ ++ rtw_hal_write_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bitmask, val); ++} ++ ++u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr) ++{ ++ return _read_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bRFRegOffsetMask); ++} ++ ++void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val) ++{ ++ _write_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bRFRegOffsetMask, val); ++} ++ ++static void _init_mp_priv_(struct mp_priv *pmp_priv) ++{ ++ WLAN_BSSID_EX *pnetwork; ++ ++ _rtw_memset(pmp_priv, 0, sizeof(struct mp_priv)); ++ ++ pmp_priv->mode = MP_OFF; ++ ++ pmp_priv->channel = 1; ++ pmp_priv->bandwidth = HT_CHANNEL_WIDTH_20; ++ pmp_priv->prime_channel_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ pmp_priv->rateidx = MPT_RATE_1M; ++ pmp_priv->txpoweridx = 0x2A; ++ ++ pmp_priv->antenna_tx = ANTENNA_A; ++ pmp_priv->antenna_rx = ANTENNA_AB; ++ ++ pmp_priv->check_mp_pkt = 0; ++ ++ pmp_priv->tx_pktcount = 0; ++ ++ pmp_priv->rx_pktcount = 0; ++ pmp_priv->rx_crcerrpktcount = 0; ++ ++ pmp_priv->network_macaddr[0] = 0x00; ++ pmp_priv->network_macaddr[1] = 0xE0; ++ pmp_priv->network_macaddr[2] = 0x4C; ++ pmp_priv->network_macaddr[3] = 0x87; ++ pmp_priv->network_macaddr[4] = 0x66; ++ pmp_priv->network_macaddr[5] = 0x55; ++ ++ pnetwork = &pmp_priv->mp_network.network; ++ _rtw_memcpy(pnetwork->MacAddress, pmp_priv->network_macaddr, ETH_ALEN); ++ ++ pnetwork->Ssid.SsidLength = 8; ++ _rtw_memcpy(pnetwork->Ssid.Ssid, "mp_871x", pnetwork->Ssid.SsidLength); ++} ++ ++#ifdef PLATFORM_WINDOWS ++/* ++void mp_wi_callback( ++ IN NDIS_WORK_ITEM* pwk_item, ++ IN PVOID cntx ++ ) ++{ ++ _adapter* padapter =(_adapter *)cntx; ++ struct mp_priv *pmppriv=&padapter->mppriv; ++ struct mp_wi_cntx *pmp_wi_cntx=&pmppriv->wi_cntx; ++ ++ // Execute specified action. ++ if(pmp_wi_cntx->curractfunc != NULL) ++ { ++ LARGE_INTEGER cur_time; ++ ULONGLONG start_time, end_time; ++ NdisGetCurrentSystemTime(&cur_time); // driver version ++ start_time = cur_time.QuadPart/10; // The return value is in microsecond ++ ++ pmp_wi_cntx->curractfunc(padapter); ++ ++ NdisGetCurrentSystemTime(&cur_time); // driver version ++ end_time = cur_time.QuadPart/10; // The return value is in microsecond ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("WorkItemActType: %d, time spent: %I64d us\n", ++ pmp_wi_cntx->param.act_type, (end_time-start_time))); ++ } ++ ++ NdisAcquireSpinLock(&(pmp_wi_cntx->mp_wi_lock)); ++ pmp_wi_cntx->bmp_wi_progress= _FALSE; ++ NdisReleaseSpinLock(&(pmp_wi_cntx->mp_wi_lock)); ++ ++ if (pmp_wi_cntx->bmpdrv_unload) ++ { ++ NdisSetEvent(&(pmp_wi_cntx->mp_wi_evt)); ++ } ++ ++} ++*/ ++ ++static int init_mp_priv_by_os(struct mp_priv *pmp_priv) ++{ ++ struct mp_wi_cntx *pmp_wi_cntx; ++ ++ if (pmp_priv == NULL) return _FAIL; ++ ++ pmp_priv->rx_testcnt = 0; ++ pmp_priv->rx_testcnt1 = 0; ++ pmp_priv->rx_testcnt2 = 0; ++ ++ pmp_priv->tx_testcnt = 0; ++ pmp_priv->tx_testcnt1 = 0; ++ ++ pmp_wi_cntx = &pmp_priv->wi_cntx ++ pmp_wi_cntx->bmpdrv_unload = _FALSE; ++ pmp_wi_cntx->bmp_wi_progress = _FALSE; ++ pmp_wi_cntx->curractfunc = NULL; ++ ++ return _SUCCESS; ++} ++#endif ++ ++#ifdef PLATFORM_LINUX ++static int init_mp_priv_by_os(struct mp_priv *pmp_priv) ++{ ++ int i, res; ++ struct mp_xmit_frame *pmp_xmitframe; ++ ++ if (pmp_priv == NULL) return _FAIL; ++ ++ _rtw_init_queue(&pmp_priv->free_mp_xmitqueue); ++ ++ pmp_priv->pallocated_mp_xmitframe_buf = NULL; ++ pmp_priv->pallocated_mp_xmitframe_buf = rtw_zmalloc(NR_MP_XMITFRAME * sizeof(struct mp_xmit_frame) + 4); ++ if (pmp_priv->pallocated_mp_xmitframe_buf == NULL) { ++ res = _FAIL; ++ goto _exit_init_mp_priv; ++ } ++ ++ pmp_priv->pmp_xmtframe_buf = pmp_priv->pallocated_mp_xmitframe_buf + 4 - ((uint) (pmp_priv->pallocated_mp_xmitframe_buf) & 3); ++ ++ pmp_xmitframe = (struct mp_xmit_frame*)pmp_priv->pmp_xmtframe_buf; ++ ++ for (i = 0; i < NR_MP_XMITFRAME; i++) ++ { ++ _rtw_init_listhead(&pmp_xmitframe->list); ++ rtw_list_insert_tail(&pmp_xmitframe->list, &pmp_priv->free_mp_xmitqueue.queue); ++ ++ pmp_xmitframe->pkt = NULL; ++ pmp_xmitframe->frame_tag = MP_FRAMETAG; ++ pmp_xmitframe->padapter = pmp_priv->papdater; ++ ++ pmp_xmitframe++; ++ } ++ ++ pmp_priv->free_mp_xmitframe_cnt = NR_MP_XMITFRAME; ++ ++ res = _SUCCESS; ++ ++_exit_init_mp_priv: ++ ++ return res; ++} ++#endif ++ ++static void mp_init_xmit_attrib(struct mp_tx *pmptx, PADAPTER padapter) ++{ ++ struct pkt_attrib *pattrib; ++ struct tx_desc *desc; ++ ++ // init xmitframe attribute ++ pattrib = &pmptx->attrib; ++ _rtw_memset(pattrib, 0, sizeof(struct pkt_attrib)); ++ desc = &pmptx->desc; ++ _rtw_memset(desc, 0, TXDESC_SIZE); ++ ++ pattrib->ether_type = 0x8712; ++ //_rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN); ++// _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ _rtw_memset(pattrib->dst, 0xFF, ETH_ALEN); ++// pattrib->pctrl = 0; ++// pattrib->dhcp_pkt = 0; ++// pattrib->pktlen = 0; ++ pattrib->ack_policy = 0; ++// pattrib->pkt_hdrlen = ETH_HLEN; ++ pattrib->hdrlen = WLAN_HDR_A3_LEN; ++ pattrib->subtype = WIFI_DATA; ++ pattrib->priority = 0; ++ pattrib->qsel = pattrib->priority; ++// do_queue_select(padapter, pattrib); ++ pattrib->nr_frags = 1; ++ pattrib->encrypt = 0; ++ pattrib->bswenc = _FALSE; ++ pattrib->qos_en = _FALSE; ++} ++ ++s32 init_mp_priv(PADAPTER padapter) ++{ ++ struct mp_priv *pmppriv = &padapter->mppriv; ++ ++ _init_mp_priv_(pmppriv); ++ pmppriv->papdater = padapter; ++ ++ pmppriv->tx.stop = 1; ++ mp_init_xmit_attrib(&pmppriv->tx, padapter); ++ ++ switch (padapter->registrypriv.rf_config) { ++ case RF_1T1R: ++ pmppriv->antenna_tx = ANTENNA_A; ++ pmppriv->antenna_rx = ANTENNA_A; ++ break; ++ case RF_1T2R: ++ default: ++ pmppriv->antenna_tx = ANTENNA_A; ++ pmppriv->antenna_rx = ANTENNA_AB; ++ break; ++ case RF_2T2R: ++ case RF_2T2R_GREEN: ++ pmppriv->antenna_tx = ANTENNA_AB; ++ pmppriv->antenna_rx = ANTENNA_AB; ++ break; ++ case RF_2T4R: ++ pmppriv->antenna_tx = ANTENNA_AB; ++ pmppriv->antenna_rx = ANTENNA_ABCD; ++ break; ++ } ++ ++ return _SUCCESS; ++} ++ ++void free_mp_priv(struct mp_priv *pmp_priv) ++{ ++ if (pmp_priv->pallocated_mp_xmitframe_buf) { ++ rtw_mfree(pmp_priv->pallocated_mp_xmitframe_buf, 0); ++ pmp_priv->pallocated_mp_xmitframe_buf = NULL; ++ } ++ pmp_priv->pmp_xmtframe_buf = NULL; ++} ++ ++#ifdef CONFIG_RTL8192C ++#define PHY_IQCalibrate(a,b) rtl8192c_PHY_IQCalibrate(a,b) ++#define PHY_LCCalibrate(a) rtl8192c_PHY_LCCalibrate(a) ++#define dm_CheckTXPowerTracking(a) rtl8192c_dm_CheckTXPowerTracking(a) ++#define PHY_SetRFPathSwitch(a,b) rtl8192c_PHY_SetRFPathSwitch(a,b) ++#endif ++ ++#ifdef CONFIG_RTL8192D ++#define PHY_IQCalibrate(a) rtl8192d_PHY_IQCalibrate(a) ++#define PHY_LCCalibrate(a) rtl8192d_PHY_LCCalibrate(a) ++#define dm_CheckTXPowerTracking(a) rtl8192d_dm_CheckTXPowerTracking(a) ++#define PHY_SetRFPathSwitch(a,b) rtl8192d_PHY_SetRFPathSwitch(a,b) ++#endif ++ ++s32 ++MPT_InitializeAdapter( ++ IN PADAPTER pAdapter, ++ IN u8 Channel ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ s32 rtStatus = _SUCCESS; ++ PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; ++ u32 ledsetting; ++ ++ //------------------------------------------------------------------------- ++ // HW Initialization for 8190 MPT. ++ //------------------------------------------------------------------------- ++ //------------------------------------------------------------------------- ++ // SW Initialization for 8190 MP. ++ //------------------------------------------------------------------------- ++ pMptCtx->bMptDrvUnload = _FALSE; ++ pMptCtx->bMassProdTest = _FALSE; ++ pMptCtx->bMptIndexEven = _TRUE; //default gain index is -6.0db ++ ++ /* Init mpt event. */ ++#if 0 // for Windows ++ NdisInitializeEvent( &(pMptCtx->MptWorkItemEvent) ); ++ NdisAllocateSpinLock( &(pMptCtx->MptWorkItemSpinLock) ); ++ ++ PlatformInitializeWorkItem( ++ Adapter, ++ &(pMptCtx->MptWorkItem), ++ (RT_WORKITEM_CALL_BACK)MPT_WorkItemCallback, ++ (PVOID)Adapter, ++ "MptWorkItem"); ++#endif ++ pMptCtx->bMptWorkItemInProgress = _FALSE; ++ pMptCtx->CurrMptAct = NULL; ++ //------------------------------------------------------------------------- ++ ++#if 1 ++ // Don't accept any packets ++ rtw_write32(pAdapter, REG_RCR, 0); ++#else ++ // Accept CRC error and destination address ++ pHalData->ReceiveConfig |= (RCR_ACRC32|RCR_AAP); ++ rtw_write32(pAdapter, REG_RCR, pHalData->ReceiveConfig); ++#endif ++ ++#if 0 ++ // If EEPROM or EFUSE is empty,we assign as RF 2T2R for MP. ++ if (pHalData->AutoloadFailFlag == TRUE) ++ { ++ pHalData->RF_Type = RF_2T2R; ++ } ++#endif ++ ledsetting = rtw_read32(pAdapter, REG_LEDCFG0); ++ rtw_write32(pAdapter, REG_LEDCFG0, ledsetting & ~LED0DIS); ++ ++#ifdef CONFIG_RTL8192C ++ PHY_IQCalibrate(pAdapter, _FALSE); ++ dm_CheckTXPowerTracking(pAdapter); //trigger thermal meter ++ PHY_LCCalibrate(pAdapter); ++#endif ++ ++#ifdef CONFIG_RTL8192D ++ PHY_IQCalibrate(pAdapter); ++ dm_CheckTXPowerTracking(pAdapter); //trigger thermal meter ++ PHY_LCCalibrate(pAdapter); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/); //Wifi default use Main ++#else ++ ++#ifdef CONFIG_RTL8192C ++#if 1 ++ if (pHalData->BoardType == BOARD_MINICARD) ++ PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/); //default use Main ++#else ++ if(pAdapter->HalFunc.GetInterfaceSelectionHandler(pAdapter) == INTF_SEL2_MINICARD ) ++ PHY_SetRFPathSwitch(Adapter, pAdapter->MgntInfo.bDefaultAntenna); //default use Main ++#endif ++ ++#endif ++ ++#endif ++ ++ pMptCtx->backup0xc50 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0); ++ pMptCtx->backup0xc58 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0); ++ pMptCtx->backup0xc30 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_RxDetector1, bMaskByte0); ++ ++ return rtStatus; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: MPT_DeInitAdapter() ++ * ++ * Overview: Extra DeInitialization for Mass Production Test. ++ * ++ * Input: PADAPTER pAdapter ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 05/08/2007 MHC Create Version 0. ++ * 05/18/2007 MHC Add normal driver MPHalt code. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++MPT_DeInitAdapter( ++ IN PADAPTER pAdapter ++ ) ++{ ++ PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; ++ ++ pMptCtx->bMptDrvUnload = _TRUE; ++#if 0 // for Windows ++ PlatformFreeWorkItem( &(pMptCtx->MptWorkItem) ); ++ ++ while(pMptCtx->bMptWorkItemInProgress) ++ { ++ if(NdisWaitEvent(&(pMptCtx->MptWorkItemEvent), 50)) ++ { ++ break; ++ } ++ } ++ NdisFreeSpinLock( &(pMptCtx->MptWorkItemSpinLock) ); ++#endif ++} ++ ++static u8 mpt_ProStartTest(PADAPTER padapter) ++{ ++ PMPT_CONTEXT pMptCtx = &padapter->mppriv.MptCtx; ++ ++ pMptCtx->bMassProdTest = _TRUE; ++ pMptCtx->bStartContTx = _FALSE; ++ pMptCtx->bCckContTx = _FALSE; ++ pMptCtx->bOfdmContTx = _FALSE; ++ pMptCtx->bSingleCarrier = _FALSE; ++ pMptCtx->bCarrierSuppression = _FALSE; ++ pMptCtx->bSingleTone = _FALSE; ++ ++ return _SUCCESS; ++} ++ ++/* ++ * General use ++ */ ++s32 SetPowerTracking(PADAPTER padapter, u8 enable) ++{ ++ ++ Hal_SetPowerTracking( padapter, enable ); ++ return 0; ++} ++ ++void GetPowerTracking(PADAPTER padapter, u8 *enable) ++{ ++ Hal_GetPowerTracking( padapter, enable ); ++} ++ ++static void disable_dm(PADAPTER padapter) ++{ ++#ifndef CONFIG_RTL8723A ++ u8 v8; ++#endif ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ ++ //3 1. disable firmware dynamic mechanism ++ // disable Power Training, Rate Adaptive ++#ifdef CONFIG_RTL8723A ++ SetBcnCtrlReg(padapter, 0, EN_BCN_FUNCTION); ++#else ++ v8 = rtw_read8(padapter, REG_BCN_CTRL); ++ v8 &= ~EN_BCN_FUNCTION; ++ rtw_write8(padapter, REG_BCN_CTRL, v8); ++#endif ++ ++ //3 2. disable driver dynamic mechanism ++ // disable Dynamic Initial Gain ++ // disable High Power ++ // disable Power Tracking ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ // enable APK, LCK and IQK but disable power tracking ++ pdmpriv->TxPowerTrackControl = _FALSE; ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE); ++} ++ ++//This function initializes the DUT to the MP test mode ++s32 mp_start_test(PADAPTER padapter) ++{ ++ WLAN_BSSID_EX bssid; ++ struct sta_info *psta; ++ u32 length; ++ u8 val8; ++ ++ _irqL irqL; ++ s32 res = _SUCCESS; ++ ++ struct mp_priv *pmppriv = &padapter->mppriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *tgt_network = &pmlmepriv->cur_network; ++ ++ ++ //3 disable dynamic mechanism ++ disable_dm(padapter); ++ ++ //3 0. update mp_priv ++#if defined (CONFIG_RTL8192C) || defined (CONFIG_RTL8192D) ++ if (padapter->registrypriv.rf_config == RF_819X_MAX_TYPE) { ++// HAL_DATA_TYPE *phal = GET_HAL_DATA(padapter); ++// switch (phal->rf_type) { ++ switch (GET_RF_TYPE(padapter)) { ++ case RF_1T1R: ++ pmppriv->antenna_tx = ANTENNA_A; ++ pmppriv->antenna_rx = ANTENNA_A; ++ break; ++ case RF_1T2R: ++ default: ++ pmppriv->antenna_tx = ANTENNA_A; ++ pmppriv->antenna_rx = ANTENNA_AB; ++ break; ++ case RF_2T2R: ++ case RF_2T2R_GREEN: ++ pmppriv->antenna_tx = ANTENNA_AB; ++ pmppriv->antenna_rx = ANTENNA_AB; ++ break; ++ case RF_2T4R: ++ pmppriv->antenna_tx = ANTENNA_AB; ++ pmppriv->antenna_rx = ANTENNA_ABCD; ++ break; ++ } ++ } ++#endif ++ mpt_ProStartTest(padapter); ++ ++ //3 1. initialize a new WLAN_BSSID_EX ++// _rtw_memset(&bssid, 0, sizeof(WLAN_BSSID_EX)); ++ _rtw_memcpy(bssid.MacAddress, pmppriv->network_macaddr, ETH_ALEN); ++ bssid.Ssid.SsidLength = strlen("mp_pseudo_adhoc"); ++ _rtw_memcpy(bssid.Ssid.Ssid, (u8*)"mp_pseudo_adhoc", bssid.Ssid.SsidLength); ++ bssid.InfrastructureMode = Ndis802_11IBSS; ++ bssid.NetworkTypeInUse = Ndis802_11DS; ++ bssid.IELength = 0; ++ ++ length = get_WLAN_BSSID_EX_sz(&bssid); ++ if (length % 4) ++ bssid.Length = ((length >> 2) + 1) << 2; //round up to multiple of 4 bytes. ++ else ++ bssid.Length = length; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ goto end_of_mp_start_test; ++ ++ //init mp_start_test status ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ rtw_disassoc_cmd(padapter, 500, _TRUE); ++ rtw_indicate_disconnect(padapter); ++ rtw_free_assoc_resources(padapter, 1); ++ } ++ pmppriv->prev_fw_state = get_fwstate(pmlmepriv); ++ pmlmepriv->fw_state = WIFI_MP_STATE; ++#if 0 ++ if (pmppriv->mode == _LOOPBOOK_MODE_) { ++ set_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE); //append txdesc ++ RT_TRACE(_module_mp_, _drv_notice_, ("+start mp in Lookback mode\n")); ++ } else { ++ RT_TRACE(_module_mp_, _drv_notice_, ("+start mp in normal mode\n")); ++ } ++#endif ++ set_fwstate(pmlmepriv, _FW_UNDER_LINKING); ++ ++ //3 2. create a new psta for mp driver ++ //clear psta in the cur_network, if any ++ psta = rtw_get_stainfo(&padapter->stapriv, tgt_network->network.MacAddress); ++ if (psta) rtw_free_stainfo(padapter, psta); ++ ++ psta = rtw_alloc_stainfo(&padapter->stapriv, bssid.MacAddress); ++ if (psta == NULL) { ++ RT_TRACE(_module_mp_, _drv_err_, ("mp_start_test: Can't alloc sta_info!\n")); ++ pmlmepriv->fw_state = pmppriv->prev_fw_state; ++ res = _FAIL; ++ goto end_of_mp_start_test; ++ } ++ ++ //3 3. join psudo AdHoc ++ tgt_network->join_res = 1; ++ tgt_network->aid = psta->aid = 1; ++ _rtw_memcpy(&tgt_network->network, &bssid, length); ++ ++ rtw_indicate_connect(padapter); ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING); ++ ++end_of_mp_start_test: ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if (res == _SUCCESS) ++ { ++ // set MSR to WIFI_FW_ADHOC_STATE ++#if defined (CONFIG_RTL8192C) || defined (CONFIG_RTL8192D) ++ val8 = rtw_read8(padapter, MSR) & 0xFC; // 0x0102 ++ val8 |= WIFI_FW_ADHOC_STATE; ++ rtw_write8(padapter, MSR, val8); // Link in ad hoc network ++#endif ++ ++#if !defined (CONFIG_RTL8192C) && !defined (CONFIG_RTL8192D) ++ rtw_write8(padapter, MSR, 1); // Link in ad hoc network ++ rtw_write8(padapter, RCR, 0); // RCR : disable all pkt, 0x10250048 ++ rtw_write8(padapter, RCR+2, 0x57); // RCR disable Check BSSID, 0x1025004a ++ ++ // disable RX filter map , mgt frames will put in RX FIFO 0 ++ rtw_write16(padapter, RXFLTMAP0, 0x0); // 0x10250116 ++ ++ val8 = rtw_read8(padapter, EE_9346CR); // 0x1025000A ++ if (!(val8 & _9356SEL))//boot from EFUSE ++ efuse_change_max_size(padapter); ++#endif ++ } ++ ++ return res; ++} ++//------------------------------------------------------------------------------ ++//This function change the DUT from the MP test mode into normal mode ++void mp_stop_test(PADAPTER padapter) ++{ ++ struct mp_priv *pmppriv = &padapter->mppriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *tgt_network = &pmlmepriv->cur_network; ++ struct sta_info *psta; ++ ++ _irqL irqL; ++ ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _FALSE) ++ goto end_of_mp_stop_test; ++ ++ //3 1. disconnect psudo AdHoc ++ rtw_indicate_disconnect(padapter); ++ ++ //3 2. clear psta used in mp test mode. ++// rtw_free_assoc_resources(padapter, 1); ++ psta = rtw_get_stainfo(&padapter->stapriv, tgt_network->network.MacAddress); ++ if (psta) rtw_free_stainfo(padapter, psta); ++ ++ //3 3. return to normal state (default:station mode) ++ pmlmepriv->fw_state = pmppriv->prev_fw_state; // WIFI_STATION_STATE; ++ ++ //flush the cur_network ++ _rtw_memset(tgt_network, 0, sizeof(struct wlan_network)); ++ ++ _clr_fwstate_(pmlmepriv, WIFI_MP_STATE); ++ ++end_of_mp_stop_test: ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/ ++#if 0 ++//#ifdef CONFIG_USB_HCI ++static VOID mpt_AdjustRFRegByRateByChan92CU(PADAPTER pAdapter, u8 RateIdx, u8 Channel, u8 BandWidthID) ++{ ++ u8 eRFPath; ++ u32 rfReg0x26; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ ++ if (RateIdx < MPT_RATE_6M) { // CCK rate,for 88cu ++ rfReg0x26 = 0xf400; ++ } ++ else if ((RateIdx >= MPT_RATE_6M) && (RateIdx <= MPT_RATE_54M)) {// OFDM rate,for 88cu ++ if ((4 == Channel) || (8 == Channel) || (12 == Channel)) ++ rfReg0x26 = 0xf000; ++ else if ((5 == Channel) || (7 == Channel) || (13 == Channel) || (14 == Channel)) ++ rfReg0x26 = 0xf400; ++ else ++ rfReg0x26 = 0x4f200; ++ } ++ else if ((RateIdx >= MPT_RATE_MCS0) && (RateIdx <= MPT_RATE_MCS15)) {// MCS 20M ,for 88cu // MCS40M rate,for 88cu ++ ++ if (HT_CHANNEL_WIDTH_20 == BandWidthID) { ++ if ((4 == Channel) || (8 == Channel)) ++ rfReg0x26 = 0xf000; ++ else if ((5 == Channel) || (7 == Channel) || (13 == Channel) || (14 == Channel)) ++ rfReg0x26 = 0xf400; ++ else ++ rfReg0x26 = 0x4f200; ++ } ++ else{ ++ if ((4 == Channel) || (8 == Channel)) ++ rfReg0x26 = 0xf000; ++ else if ((5 == Channel) || (7 == Channel)) ++ rfReg0x26 = 0xf400; ++ else ++ rfReg0x26 = 0x4f200; ++ } ++ } ++ ++// RT_TRACE(COMP_CMD, DBG_LOUD, ("\n mpt_AdjustRFRegByRateByChan92CU():Chan:%d Rate=%d rfReg0x26:0x%08x\n",Channel, RateIdx,rfReg0x26)); ++ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) { ++ write_rfreg(pAdapter, eRFPath, RF_SYN_G2, rfReg0x26); ++ } ++} ++#endif ++/*----------------------------------------------------------------------------- ++ * Function: mpt_SwitchRfSetting ++ * ++ * Overview: Change RF Setting when we siwthc channel/rate/BW for MP. ++ * ++ * Input: IN PADAPTER pAdapter ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 01/08/2009 MHC Suggestion from SD3 Willis for 92S series. ++ * 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3. ++ * ++ *---------------------------------------------------------------------------*/ ++static void mpt_SwitchRfSetting(PADAPTER pAdapter) ++{ ++ Hal_mpt_SwitchRfSetting(pAdapter); ++ } ++ ++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/ ++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ ++static void MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14) ++{ ++ Hal_MPT_CCKTxPowerAdjust(Adapter,bInCH14); ++} ++ ++static void MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven) ++{ ++ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter,beven); ++ } ++ ++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ ++ ++/* ++ * SetChannel ++ * Description ++ * Use H2C command to change channel, ++ * not only modify rf register, but also other setting need to be done. ++ */ ++void SetChannel(PADAPTER pAdapter) ++{ ++ Hal_SetChannel(pAdapter); ++ ++} ++ ++/* ++ * Notice ++ * Switch bandwitdth may change center frequency(channel) ++ */ ++void SetBandwidth(PADAPTER pAdapter) ++{ ++ Hal_SetBandwidth(pAdapter); ++ ++} ++ ++static void SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower) ++{ ++ Hal_SetCCKTxPower(pAdapter,TxPower); ++} ++ ++static void SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower) ++{ ++ Hal_SetOFDMTxPower(pAdapter,TxPower); ++ } ++ ++ ++void SetAntenna(PADAPTER pAdapter) ++ { ++ Hal_SetAntenna(pAdapter); ++} ++ ++void SetAntennaPathPower(PADAPTER pAdapter) ++{ ++ Hal_SetAntennaPathPower(pAdapter); ++} ++ ++void SetTxPower(PADAPTER pAdapter) ++{ ++ Hal_SetTxPower(pAdapter); ++ } ++ ++void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset) ++{ ++ u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D,tmpAGC; ++ ++ TxAGCOffset_B = (ulTxAGCOffset&0x000000ff); ++ TxAGCOffset_C = ((ulTxAGCOffset&0x0000ff00)>>8); ++ TxAGCOffset_D = ((ulTxAGCOffset&0x00ff0000)>>16); ++ ++ tmpAGC = (TxAGCOffset_D<<8 | TxAGCOffset_C<<4 | TxAGCOffset_B); ++ write_bbreg(pAdapter, rFPGA0_TxGainStage, ++ (bXBTxAGC|bXCTxAGC|bXDTxAGC), tmpAGC); ++} ++ ++void SetDataRate(PADAPTER pAdapter) ++{ ++ Hal_SetDataRate(pAdapter); ++} ++ ++#if !defined (CONFIG_RTL8192C) && !defined (CONFIG_RTL8192D) ++/*------------------------------Define structure----------------------------*/ ++typedef struct _R_ANTENNA_SELECT_OFDM { ++ u32 r_tx_antenna:4; ++ u32 r_ant_l:4; ++ u32 r_ant_non_ht:4; ++ u32 r_ant_ht1:4; ++ u32 r_ant_ht2:4; ++ u32 r_ant_ht_s1:4; ++ u32 r_ant_non_ht_s1:4; ++ u32 OFDM_TXSC:2; ++ u32 Reserved:2; ++}R_ANTENNA_SELECT_OFDM; ++ ++typedef struct _R_ANTENNA_SELECT_CCK { ++ u8 r_cckrx_enable_2:2; ++ u8 r_cckrx_enable:2; ++ u8 r_ccktx_enable:4; ++}R_ANTENNA_SELECT_CCK; ++#endif ++ ++s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther) ++{ ++ return Hal_SetThermalMeter( pAdapter, target_ther); ++} ++ ++static void TriggerRFThermalMeter(PADAPTER pAdapter) ++{ ++ Hal_TriggerRFThermalMeter(pAdapter); ++} ++ ++static u8 ReadRFThermalMeter(PADAPTER pAdapter) ++{ ++ return Hal_ReadRFThermalMeter(pAdapter); ++} ++ ++void GetThermalMeter(PADAPTER pAdapter, u8 *value) ++{ ++ Hal_GetThermalMeter(pAdapter,value); ++} ++ ++void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart) ++{ ++ Hal_SetSingleCarrierTx(pAdapter,bStart); ++} ++ ++void SetSingleToneTx(PADAPTER pAdapter, u8 bStart) ++{ ++ Hal_SetSingleToneTx(pAdapter,bStart); ++} ++ ++void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart) ++{ ++ Hal_SetCarrierSuppressionTx(pAdapter, bStart); ++} ++ ++void SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart) ++ { ++ Hal_SetCCKContinuousTx(pAdapter,bStart); ++ } ++ ++void SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart) ++ { ++ Hal_SetOFDMContinuousTx( pAdapter, bStart); ++}/* mpt_StartOfdmContTx */ ++ ++void SetContinuousTx(PADAPTER pAdapter, u8 bStart) ++{ ++ Hal_SetContinuousTx(pAdapter,bStart); ++} ++ ++//------------------------------------------------------------------------------ ++static void dump_mpframe(PADAPTER padapter, struct xmit_frame *pmpframe) ++{ ++ rtw_hal_mgnt_xmit(padapter, pmpframe); ++} ++ ++static struct xmit_frame *alloc_mp_xmitframe(struct xmit_priv *pxmitpriv) ++{ ++ struct xmit_frame *pmpframe; ++ struct xmit_buf *pxmitbuf; ++ ++ if ((pmpframe = rtw_alloc_xmitframe(pxmitpriv)) == NULL) ++ { ++ return NULL; ++ } ++ ++ if ((pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv)) == NULL) ++ { ++ rtw_free_xmitframe(pxmitpriv, pmpframe); ++ return NULL; ++ } ++ ++ pmpframe->frame_tag = MP_FRAMETAG; ++ ++ pmpframe->pxmitbuf = pxmitbuf; ++ ++ pmpframe->buf_addr = pxmitbuf->pbuf; ++ ++ pxmitbuf->priv_data = pmpframe; ++ ++ return pmpframe; ++ ++} ++ ++static thread_return mp_xmit_packet_thread(thread_context context) ++{ ++ struct xmit_frame *pxmitframe; ++ struct mp_tx *pmptx; ++ struct mp_priv *pmp_priv; ++ struct xmit_priv *pxmitpriv; ++ PADAPTER padapter; ++ ++ pmp_priv = (struct mp_priv *)context; ++ pmptx = &pmp_priv->tx; ++ padapter = pmp_priv->papdater; ++ pxmitpriv = &(padapter->xmitpriv); ++ ++ thread_enter("RTW_MP_THREAD"); ++ ++ DBG_871X("%s:pkTx Start\n", __func__); ++ while (1) { ++ pxmitframe = alloc_mp_xmitframe(pxmitpriv); ++ if (pxmitframe == NULL) { ++ if (pmptx->stop || ++ padapter->bSurpriseRemoved || ++ padapter->bDriverStopped) { ++ goto exit; ++ } ++ else { ++ rtw_msleep_os(1); ++ continue; ++ } ++ } ++ ++ _rtw_memcpy((u8 *)(pxmitframe->buf_addr+TXDESC_OFFSET), pmptx->buf, pmptx->write_size); ++ _rtw_memcpy(&(pxmitframe->attrib), &(pmptx->attrib), sizeof(struct pkt_attrib)); ++ ++ dump_mpframe(padapter, pxmitframe); ++ ++ pmptx->sended++; ++ pmp_priv->tx_pktcount++; ++ ++ if (pmptx->stop || ++ padapter->bSurpriseRemoved || ++ padapter->bDriverStopped) ++ goto exit; ++ if ((pmptx->count != 0) && ++ (pmptx->count == pmptx->sended)) ++ goto exit; ++ ++ flush_signals_thread(); ++ } ++ ++exit: ++ //DBG_871X("%s:pkTx Exit\n", __func__); ++ rtw_mfree(pmptx->pallocated_buf, pmptx->buf_size); ++ pmptx->pallocated_buf = NULL; ++ pmptx->stop = 1; ++ ++ thread_exit(); ++} ++ ++void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc) ++{ ++ struct mp_priv *pmp_priv = &padapter->mppriv; ++ _rtw_memcpy(ptxdesc, &(pmp_priv->tx.desc), TXDESC_SIZE); ++} ++ ++void SetPacketTx(PADAPTER padapter) ++{ ++ u8 *ptr, *pkt_start, *pkt_end; ++ u32 pkt_size; ++ struct tx_desc *desc; ++ struct rtw_ieee80211_hdr *hdr; ++ u8 payload; ++ s32 bmcast; ++ struct pkt_attrib *pattrib; ++ struct mp_priv *pmp_priv; ++ ++ ++ pmp_priv = &padapter->mppriv; ++ if (pmp_priv->tx.stop) return; ++ pmp_priv->tx.sended = 0; ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx_pktcount = 0; ++ ++ //3 1. update_attrib() ++ pattrib = &pmp_priv->tx.attrib; ++ _rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++ bmcast = IS_MCAST(pattrib->ra); ++ if (bmcast) { ++ pattrib->mac_id = 1; ++ pattrib->psta = rtw_get_bcmc_stainfo(padapter); ++ } else { ++ pattrib->mac_id = 0; ++ pattrib->psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv)); ++ } ++ ++ pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->pktlen; ++ ++ //3 2. allocate xmit buffer ++ pkt_size = pattrib->last_txcmdsz; ++ ++ if (pmp_priv->tx.pallocated_buf) ++ rtw_mfree(pmp_priv->tx.pallocated_buf, pmp_priv->tx.buf_size); ++ pmp_priv->tx.write_size = pkt_size; ++ pmp_priv->tx.buf_size = pkt_size + XMITBUF_ALIGN_SZ; ++ pmp_priv->tx.pallocated_buf = rtw_zmalloc(pmp_priv->tx.buf_size); ++ if (pmp_priv->tx.pallocated_buf == NULL) { ++ DBG_871X("%s: malloc(%d) fail!!\n", __func__, pmp_priv->tx.buf_size); ++ return; ++ } ++ pmp_priv->tx.buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pmp_priv->tx.pallocated_buf), XMITBUF_ALIGN_SZ); ++ ptr = pmp_priv->tx.buf; ++ ++ desc = &(pmp_priv->tx.desc); ++ _rtw_memset(desc, 0, TXDESC_SIZE); ++ pkt_start = ptr; ++ pkt_end = pkt_start + pkt_size; ++ ++ //3 3. init TX descriptor ++ // offset 0 ++ //desc->txdw0 |= cpu_to_le32(pkt_size & 0x0000FFFF); // packet size ++ //desc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); ++ //desc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00FF0000); //32 bytes for TX Desc ++ //if (bmcast) desc->txdw0 |= cpu_to_le32(BMC); // broadcast packet ++ ++ // offset 4 ++ desc->txdw1 |= cpu_to_le32(BK); // don't aggregate(AMPDU) ++ desc->txdw1 |= cpu_to_le32((pattrib->mac_id) & 0x1F); //CAM_ID(MAC_ID) ++ desc->txdw1 |= cpu_to_le32((pattrib->qsel << QSEL_SHT) & 0x00001F00); // Queue Select, TID ++ desc->txdw1 |= cpu_to_le32((pattrib->raid << Rate_ID_SHT) & 0x000F0000); // Rate Adaptive ID ++ ++ // offset 8 ++ // offset 12 ++ //desc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0xffff0000); ++ ++ // offset 16 ++ //desc->txdw4 |= cpu_to_le32(QoS); ++ desc->txdw4 |= cpu_to_le32(HW_SEQ_EN); ++ desc->txdw4 |= cpu_to_le32(USERATE); ++ desc->txdw4 |= cpu_to_le32(DISDATAFB); ++ ++ if( pmp_priv->preamble ){ ++ if (pmp_priv->rateidx <= MPT_RATE_54M) ++ desc->txdw4 |= cpu_to_le32(DATA_SHORT); // CCK Short Preamble ++ } ++ if (pmp_priv->bandwidth == HT_CHANNEL_WIDTH_40) ++ desc->txdw4 |= cpu_to_le32(DATA_BW); ++ ++ // offset 20 ++ desc->txdw5 |= cpu_to_le32(pmp_priv->rateidx & 0x0000001F); ++ ++ if( pmp_priv->preamble ){ ++ if (pmp_priv->rateidx > MPT_RATE_54M) ++ desc->txdw5 |= cpu_to_le32(SGI); // MCS Short Guard Interval ++ } ++ desc->txdw5 |= cpu_to_le32(0x0001FF00); // DATA/RTS Rate Fallback Limit ++ ++ //3 4. make wlan header, make_wlanhdr() ++ hdr = (struct rtw_ieee80211_hdr *)pkt_start; ++ SetFrameSubType(&hdr->frame_ctl, pattrib->subtype); ++ _rtw_memcpy(hdr->addr1, pattrib->dst, ETH_ALEN); // DA ++ _rtw_memcpy(hdr->addr2, pattrib->src, ETH_ALEN); // SA ++ _rtw_memcpy(hdr->addr3, get_bssid(&padapter->mlmepriv), ETH_ALEN); // RA, BSSID ++ ++ //3 5. make payload ++ ptr = pkt_start + pattrib->hdrlen; ++ ++ switch (pmp_priv->tx.payload) { ++ case 0: ++ payload = 0x00; ++ break; ++ case 1: ++ payload = 0x5a; ++ break; ++ case 2: ++ payload = 0xa5; ++ break; ++ case 3: ++ payload = 0xff; ++ break; ++ default: ++ payload = 0x00; ++ break; ++ } ++ ++ _rtw_memset(ptr, payload, pkt_end - ptr); ++ ++ //3 6. start thread ++#ifdef PLATFORM_LINUX ++ pmp_priv->tx.PktTxThread = kthread_run(mp_xmit_packet_thread, pmp_priv, "RTW_MP_THREAD"); ++ if (IS_ERR(pmp_priv->tx.PktTxThread)) ++ DBG_871X("Create PktTx Thread Fail !!!!!\n"); ++#endif ++#ifdef PLATFORM_FREEBSD ++{ ++ struct proc *p; ++ struct thread *td; ++ pmp_priv->tx.PktTxThread = kproc_kthread_add(mp_xmit_packet_thread, pmp_priv, ++ &p, &td, RFHIGHPID, 0, "MPXmitThread", "MPXmitThread"); ++ ++ if (pmp_priv->tx.PktTxThread < 0) ++ DBG_871X("Create PktTx Thread Fail !!!!!\n"); ++} ++#endif ++} ++ ++void SetPacketRx(PADAPTER pAdapter, u8 bStartRx) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ if(bStartRx) ++ { ++ pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; ++ ++ pHalData->ReceiveConfig |= ACRC32; ++ ++ rtw_write32(pAdapter, REG_RCR, pHalData->ReceiveConfig); ++ ++ // Accept all data frames ++ rtw_write16(pAdapter, REG_RXFLTMAP2, 0xFFFF); ++ } ++ else ++ { ++ rtw_write32(pAdapter, REG_RCR, 0); ++ } ++} ++ ++void ResetPhyRxPktCount(PADAPTER pAdapter) ++{ ++ u32 i, phyrx_set = 0; ++ ++ for (i = 0; i <= 0xF; i++) { ++ phyrx_set = 0; ++ phyrx_set |= _RXERR_RPT_SEL(i); //select ++ phyrx_set |= RXERR_RPT_RST; // set counter to zero ++ rtw_write32(pAdapter, REG_RXERR_RPT, phyrx_set); ++ } ++} ++ ++static u32 GetPhyRxPktCounts(PADAPTER pAdapter, u32 selbit) ++{ ++ //selection ++ u32 phyrx_set = 0, count = 0; ++ ++ phyrx_set = _RXERR_RPT_SEL(selbit & 0xF); ++ rtw_write32(pAdapter, REG_RXERR_RPT, phyrx_set); ++ ++ //Read packet count ++ count = rtw_read32(pAdapter, REG_RXERR_RPT) & RXERR_COUNTER_MASK; ++ ++ return count; ++} ++ ++u32 GetPhyRxPktReceived(PADAPTER pAdapter) ++{ ++ u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0; ++ ++ OFDM_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_OFDM_MPDU_OK); ++ CCK_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_CCK_MPDU_OK); ++ HT_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_HT_MPDU_OK); ++ ++ return OFDM_cnt + CCK_cnt + HT_cnt; ++} ++ ++u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter) ++{ ++ u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0; ++ ++ OFDM_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_OFDM_MPDU_FAIL); ++ CCK_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_CCK_MPDU_FAIL); ++ HT_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_HT_MPDU_FAIL); ++ ++ return OFDM_cnt + CCK_cnt + HT_cnt; ++} ++ ++//reg 0x808[9:0]: FFT data x ++//reg 0x808[22]: 0 --> 1 to get 1 FFT data y ++//reg 0x8B4[15:0]: FFT data y report ++static u32 GetPSDData(PADAPTER pAdapter, u32 point) ++{ ++ int psd_val; ++ ++ ++ psd_val = rtw_read32(pAdapter, 0x808); ++ psd_val &= 0xFFBFFC00; ++ psd_val |= point; ++ ++ rtw_write32(pAdapter, 0x808, psd_val); ++ rtw_mdelay_os(1); ++ psd_val |= 0x00400000; ++ ++ rtw_write32(pAdapter, 0x808, psd_val); ++ rtw_mdelay_os(1); ++ psd_val = rtw_read32(pAdapter, 0x8B4); ++ ++ psd_val &= 0x0000FFFF; ++ ++ return psd_val; ++} ++ ++/* ++ * pts start_point_min stop_point_max ++ * 128 64 64 + 128 = 192 ++ * 256 128 128 + 256 = 384 ++ * 512 256 256 + 512 = 768 ++ * 1024 512 512 + 1024 = 1536 ++ * ++ */ ++u32 mp_query_psd(PADAPTER pAdapter, u8 *data) ++{ ++ u32 i, psd_pts=0, psd_start=0, psd_stop=0; ++ u32 psd_data=0; ++ ++#ifdef PLATFORM_LINUX ++ if (!netif_running(pAdapter->pnetdev)) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("mp_query_psd: Fail! interface not opened!\n")); ++ return 0; ++ } ++#endif ++ ++ if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("mp_query_psd: Fail! not in MP mode!\n")); ++ return 0; ++ } ++ ++ if (strlen(data) == 0) { //default value ++ psd_pts = 128; ++ psd_start = 64; ++ psd_stop = 128; ++ } else { ++ sscanf(data, "pts=%d,start=%d,stop=%d", &psd_pts, &psd_start, &psd_stop); ++ } ++ ++ _rtw_memset(data, '\0', sizeof(data)); ++ ++ i = psd_start; ++ while (i < psd_stop) ++ { ++ if (i >= psd_pts) { ++ psd_data = GetPSDData(pAdapter, i-psd_pts); ++ } else { ++ psd_data = GetPSDData(pAdapter, i); ++ } ++ sprintf(data, "%s%x ", data, psd_data); ++ i++; ++ } ++ ++ #ifdef CONFIG_LONG_DELAY_ISSUE ++ rtw_msleep_os(100); ++ #else ++ rtw_mdelay_os(100); ++ #endif ++ ++ return strlen(data)+1; ++} ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp_ioctl.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp_ioctl.c +new file mode 100644 +index 000000000000..a0d8680ea830 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mp_ioctl.c +@@ -0,0 +1,2953 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_MP_IOCTL_C_ ++ ++#include ++#include ++#include ++#include ++ ++//#include ++#include ++ ++ ++//**************** oid_rtl_seg_81_85 section start **************** ++NDIS_STATUS oid_rt_wireless_mode_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u8)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ if (poid_par_priv->type_of_oid == SET_OID) { ++ Adapter->registrypriv.wireless_mode = *(u8*)poid_par_priv->information_buf; ++ } else if (poid_par_priv->type_of_oid == QUERY_OID) { ++ *(u8*)poid_par_priv->information_buf = Adapter->registrypriv.wireless_mode; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ RT_TRACE(_module_mp_, _drv_info_, ("-query Wireless Mode=%d\n", Adapter->registrypriv.wireless_mode)); ++ } else { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++//**************** oid_rtl_seg_81_87_80 section start **************** ++NDIS_STATUS oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ struct bb_reg_param *pbbreg; ++ u16 offset; ++ u32 value; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_write_bb_reg_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(struct bb_reg_param)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pbbreg = (struct bb_reg_param *)(poid_par_priv->information_buf); ++ ++ offset = (u16)(pbbreg->offset) & 0xFFF; //0ffset :0x800~0xfff ++ if (offset < BB_REG_BASE_ADDR) offset |= BB_REG_BASE_ADDR; ++ ++ value = pbbreg->value; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_write_bb_reg_hdl: offset=0x%03X value=0x%08X\n", ++ offset, value)); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ write_bbreg(Adapter, offset, 0xFFFFFFFF, value); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ struct bb_reg_param *pbbreg; ++ u16 offset; ++ u32 value; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_bb_reg_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(struct bb_reg_param)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pbbreg = (struct bb_reg_param *)(poid_par_priv->information_buf); ++ ++ offset = (u16)(pbbreg->offset) & 0xFFF; //0ffset :0x800~0xfff ++ if (offset < BB_REG_BASE_ADDR) offset |= BB_REG_BASE_ADDR; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ value = read_bbreg(Adapter, offset, 0xFFFFFFFF); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ pbbreg->value = value; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_pro_read_bb_reg_hdl: offset=0x%03X value:0x%08X\n", ++ offset, value)); ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ struct rf_reg_param *pbbreg; ++ u8 path; ++ u8 offset; ++ u32 value; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_write_rf_reg_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(struct rf_reg_param)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pbbreg = (struct rf_reg_param *)(poid_par_priv->information_buf); ++ ++ if (pbbreg->path >= MAX_RF_PATH_NUMS) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ if (pbbreg->offset > 0xFF) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ if (pbbreg->value > 0xFFFFF) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ path = (u8)pbbreg->path; ++ offset = (u8)pbbreg->offset; ++ value = pbbreg->value; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_write_rf_reg_hdl: path=%d offset=0x%02X value=0x%05X\n", ++ path, offset, value)); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ write_rfreg(Adapter, path, offset, value); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ struct rf_reg_param *pbbreg; ++ u8 path; ++ u8 offset; ++ u32 value; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_rf_reg_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(struct rf_reg_param)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pbbreg = (struct rf_reg_param *)(poid_par_priv->information_buf); ++ ++ if (pbbreg->path >= MAX_RF_PATH_NUMS) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ if (pbbreg->offset > 0xFF) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ path = (u8)pbbreg->path; ++ offset = (u8)pbbreg->offset; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ value = read_rfreg(Adapter, path, offset); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ pbbreg->value = value; ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_pro_read_rf_reg_hdl: path=%d offset=0x%02X value=0x%05X\n", ++ path, offset, value)); ++ ++_func_exit_; ++ ++ return status; ++} ++//**************** oid_rtl_seg_81_87_00 section end**************** ++//------------------------------------------------------------------------------ ++ ++//**************** oid_rtl_seg_81_80_00 section start **************** ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_data_rate_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 ratevalue;//4 ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("+oid_rt_pro_set_data_rate_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len != sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ ratevalue = *((u32*)poid_par_priv->information_buf);//4 ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_set_data_rate_hdl: data rate idx=%d\n", ratevalue)); ++ if (ratevalue >= MPT_RATE_LAST) ++ return NDIS_STATUS_INVALID_DATA; ++ ++ Adapter->mppriv.rateidx = ratevalue; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetDataRate(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_start_test_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 mode; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_start_test_hdl\n")); ++ ++ if (Adapter->registrypriv.mp_mode == 0) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ //IQCalibrateBcut(Adapter); ++ ++ mode = *((u32*)poid_par_priv->information_buf); ++ Adapter->mppriv.mode = mode;// 1 for loopback ++ ++ if (mp_start_test(Adapter) == _FAIL) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ goto exit; ++ } ++ ++exit: ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("-oid_rt_pro_start_test_hdl: mp_mode=%d\n", Adapter->mppriv.mode)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_stop_test_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_STOP_TEST\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ mp_stop_test(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("-Set OID_RT_PRO_STOP_TEST\n")); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 Channel; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_channel_direct_call_hdl\n")); ++ ++ if (poid_par_priv->information_buf_len != sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ if (poid_par_priv->type_of_oid == QUERY_OID) { ++ *((u32*)poid_par_priv->information_buf) = Adapter->mppriv.channel; ++ return NDIS_STATUS_SUCCESS; ++ } ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ Channel = *((u32*)poid_par_priv->information_buf); ++ RT_TRACE(_module_mp_, _drv_notice_, ("oid_rt_pro_set_channel_direct_call_hdl: Channel=%d\n", Channel)); ++ if (Channel > 14) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ Adapter->mppriv.channel = Channel; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetChannel(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_set_bandwidth_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u16 bandwidth; ++ u16 channel_offset; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("+oid_rt_set_bandwidth_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ bandwidth = *((u32*)poid_par_priv->information_buf);//4 ++ channel_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ ++ if (bandwidth != HT_CHANNEL_WIDTH_40) ++ bandwidth = HT_CHANNEL_WIDTH_20; ++ padapter->mppriv.bandwidth = (u8)bandwidth; ++ padapter->mppriv.prime_channel_offset = (u8)channel_offset; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetBandwidth(padapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_set_bandwidth_hdl: bandwidth=%d channel_offset=%d\n", ++ bandwidth, channel_offset)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 antenna; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_antenna_bb_hdl\n")); ++ ++ if (poid_par_priv->information_buf_len != sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ if (poid_par_priv->type_of_oid == SET_OID) ++ { ++ antenna = *(u32*)poid_par_priv->information_buf; ++ ++ Adapter->mppriv.antenna_tx = (u16)((antenna & 0xFFFF0000) >> 16); ++ Adapter->mppriv.antenna_rx = (u16)(antenna & 0x0000FFFF); ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_set_antenna_bb_hdl: tx_ant=0x%04x rx_ant=0x%04x\n", ++ Adapter->mppriv.antenna_tx, Adapter->mppriv.antenna_rx)); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetAntenna(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ } else { ++ antenna = (Adapter->mppriv.antenna_tx << 16)|Adapter->mppriv.antenna_rx; ++ *(u32*)poid_par_priv->information_buf = antenna; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 tx_pwr_idx; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_set_tx_power_control_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len != sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ tx_pwr_idx = *((u32*)poid_par_priv->information_buf); ++ if (tx_pwr_idx > MAX_TX_PWR_INDEX_N_MODE) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ Adapter->mppriv.txpoweridx = (u8)tx_pwr_idx; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_set_tx_power_control_hdl: idx=0x%2x\n", ++ Adapter->mppriv.txpoweridx)); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetTxPower(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++//------------------------------------------------------------------------------ ++//**************** oid_rtl_seg_81_80_20 section start **************** ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid !=QUERY_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if (poid_par_priv->information_buf_len == sizeof(ULONG)) { ++ *(ULONG*)poid_par_priv->information_buf = Adapter->mppriv.tx_pktcount; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } else { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_query_rx_packet_received_hdl.\n")); ++ if (poid_par_priv->information_buf_len == sizeof(ULONG)) { ++ *(ULONG*)poid_par_priv->information_buf = Adapter->mppriv.rx_pktcount; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ RT_TRACE(_module_mp_, _drv_alert_, ("recv_ok:%d \n",Adapter->mppriv.rx_pktcount)); ++ } else { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_query_rx_packet_crc32_error_hdl.\n")); ++ if (poid_par_priv->information_buf_len == sizeof(ULONG)) { ++ *(ULONG*)poid_par_priv->information_buf = Adapter->mppriv.rx_crcerrpktcount; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ RT_TRACE(_module_mp_, _drv_alert_, ("recv_err:%d \n",Adapter->mppriv.rx_crcerrpktcount)); ++ } else { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++ ++NDIS_STATUS oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_reset_tx_packet_sent_hdl.\n")); ++ Adapter->mppriv.tx_pktcount = 0; ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ if (poid_par_priv->information_buf_len == sizeof(ULONG)) { ++ Adapter->mppriv.rx_pktcount = 0; ++ Adapter->mppriv.rx_crcerrpktcount = 0; ++ } else { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ResetPhyRxPktCount(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_get_phy_rx_packet_received_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len != sizeof(ULONG)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ *(ULONG*)poid_par_priv->information_buf = GetPhyRxPktReceived(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("-oid_rt_get_phy_rx_packet_received_hdl: recv_ok=%d\n", *(ULONG*)poid_par_priv->information_buf)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_get_phy_rx_packet_crc32_error_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ ++ if (poid_par_priv->information_buf_len != sizeof(ULONG)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ *(ULONG*)poid_par_priv->information_buf = GetPhyRxPktCRC32Error(Adapter); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_get_phy_rx_packet_crc32_error_hdl: recv_err=%d\n", *(ULONG*)poid_par_priv->information_buf)); ++ ++_func_exit_; ++ ++ return status; ++} ++//**************** oid_rtl_seg_81_80_20 section end **************** ++NDIS_STATUS oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 bStartTest; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_continuous_tx_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ bStartTest = *((u32*)poid_par_priv->information_buf); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetContinuousTx(Adapter,(u8)bStartTest); ++ if (bStartTest) { ++ struct mp_priv *pmp_priv = &Adapter->mppriv; ++ if (pmp_priv->tx.stop == 0) { ++ pmp_priv->tx.stop = 1; ++ DBG_871X("%s: pkt tx is running...\n", __func__); ++ rtw_msleep_os(5); ++ } ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = 1; ++ SetPacketTx(Adapter); ++ } ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 bStartTest; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_alert_, ("+oid_rt_pro_set_single_carrier_tx_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ bStartTest = *((u32*)poid_par_priv->information_buf); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetSingleCarrierTx(Adapter, (u8)bStartTest); ++ if (bStartTest) { ++ struct mp_priv *pmp_priv = &Adapter->mppriv; ++ if (pmp_priv->tx.stop == 0) { ++ pmp_priv->tx.stop = 1; ++ DBG_871X("%s: pkt tx is running...\n", __func__); ++ rtw_msleep_os(5); ++ } ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = 1; ++ SetPacketTx(Adapter); ++ } ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 bStartTest; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_carrier_suppression_tx_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ bStartTest = *((u32*)poid_par_priv->information_buf); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetCarrierSuppressionTx(Adapter, (u8)bStartTest); ++ if (bStartTest) { ++ struct mp_priv *pmp_priv = &Adapter->mppriv; ++ if (pmp_priv->tx.stop == 0) { ++ pmp_priv->tx.stop = 1; ++ DBG_871X("%s: pkt tx is running...\n", __func__); ++ rtw_msleep_os(5); ++ } ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = 1; ++ SetPacketTx(Adapter); ++ } ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 bStartTest; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_alert_, ("+oid_rt_pro_set_single_tone_tx_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ bStartTest = *((u32*)poid_par_priv->information_buf); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetSingleToneTx(Adapter,(u8)bStartTest); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_modulation_hdl(struct oid_par_priv* poid_par_priv) ++{ ++ return 0; ++} ++ ++NDIS_STATUS oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ rtw_hal_set_hwreg(Adapter, HW_VAR_TRIGGER_GPIO_0, 0); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//**************** oid_rtl_seg_81_80_00 section end **************** ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro8711_join_bss_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ PNDIS_802_11_SSID pssid; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_needed = (u32)sizeof(NDIS_802_11_SSID); ++ *poid_par_priv->bytes_rw = 0; ++ if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pssid = (PNDIS_802_11_SSID)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (mp_start_joinbss(Adapter, pssid) == _FAIL) ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = sizeof(NDIS_802_11_SSID); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pRW_Reg RegRWStruct; ++ u32 offset, width; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("+oid_rt_pro_read_register_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ RegRWStruct = (pRW_Reg)poid_par_priv->information_buf; ++ offset = RegRWStruct->offset; ++ width = RegRWStruct->width; ++ ++ if (offset > 0xFFF) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ switch (width) { ++ case 1: ++ RegRWStruct->value = rtw_read8(Adapter, offset); ++ break; ++ case 2: ++ RegRWStruct->value = rtw_read16(Adapter, offset); ++ break; ++ default: ++ width = 4; ++ RegRWStruct->value = rtw_read32(Adapter, offset); ++ break; ++ } ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_read_register_hdl: offset:0x%04X value:0x%X\n", ++ offset, RegRWStruct->value)); ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = width; ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_write_register_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pRW_Reg RegRWStruct; ++ u32 offset, width, value; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("+oid_rt_pro_write_register_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ RegRWStruct = (pRW_Reg)poid_par_priv->information_buf; ++ offset = RegRWStruct->offset; ++ width = RegRWStruct->width; ++ value = RegRWStruct->value; ++ ++ if (offset > 0xFFF) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ switch (RegRWStruct->width) ++ { ++ case 1: ++ if (value > 0xFF) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ break; ++ } ++ rtw_write8(padapter, offset, (u8)value); ++ break; ++ case 2: ++ if (value > 0xFFFF) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ break; ++ } ++ rtw_write16(padapter, offset, (u16)value); ++ break; ++ case 4: ++ rtw_write32(padapter, offset, value); ++ break; ++ default: ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ break; ++ } ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("-oid_rt_pro_write_register_hdl: offset=0x%08X width=%d value=0x%X\n", ++ offset, width, value)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_burst_read_register_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pBurst_RW_Reg pBstRwReg; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_burst_read_register_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pBstRwReg = (pBurst_RW_Reg)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ rtw_read_mem(padapter, pBstRwReg->offset, (u32)pBstRwReg->len, pBstRwReg->Data); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_burst_read_register_hdl\n")); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_burst_write_register_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pBurst_RW_Reg pBstRwReg; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_burst_write_register_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pBstRwReg = (pBurst_RW_Reg)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ rtw_write_mem(padapter, pBstRwReg->offset, (u32)pBstRwReg->len, pBstRwReg->Data); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_burst_write_register_hdl\n")); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_write_txcmd_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ PADAPTER Adapter = (PADAPTER)( poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ ++ TX_CMD_Desc *TxCmd_Info; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+Set OID_RT_PRO_WRITE_TXCMD\n")); ++ ++ TxCmd_Info=(TX_CMD_Desc*)poid_par_priv->information_buf; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:Addr=%.8X\n", TxCmd_Info->offset)); ++ RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:1.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[0])); ++ RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:2.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[1])); ++ RT_TRACE(_module_mp_, _drv_info_, (("WRITE_TXCMD:3.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[2])); ++ RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:4.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[3])); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ rtw_write32(Adapter, TxCmd_Info->offset + 0, (unsigned int)TxCmd_Info->TxCMD.value[0]); ++ rtw_write32(Adapter, TxCmd_Info->offset + 4, (unsigned int)TxCmd_Info->TxCMD.value[1]); ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-Set OID_RT_PRO_WRITE_TXCMD: status=0x%08X\n", status)); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++ ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pEEPROM_RWParam pEEPROM; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+Query OID_RT_PRO_READ16_EEPROM\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pEEPROM = (pEEPROM_RWParam)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ pEEPROM->value = eeprom_read16(padapter, (u16)(pEEPROM->offset >> 1)); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-Query OID_RT_PRO_READ16_EEPROM: offset=0x%x value=0x%x\n", ++ pEEPROM->offset, pEEPROM->value)); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++ ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_write16_eeprom_hdl (struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ pEEPROM_RWParam pEEPROM; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_WRITE16_EEPROM\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pEEPROM = (pEEPROM_RWParam)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ eeprom_write16(padapter, (u16)(pEEPROM->offset >> 1), pEEPROM->value); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)( poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ struct mp_wiparam *pwi_param; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(struct mp_wiparam)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ if (Adapter->mppriv.workparam.bcompleted == _FALSE) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pwi_param = (struct mp_wiparam *)poid_par_priv->information_buf; ++ ++ _rtw_memcpy(pwi_param, &Adapter->mppriv.workparam, sizeof(struct mp_wiparam)); ++ Adapter->mppriv.act_in_progress = _FALSE; ++// RT_TRACE(_module_mp_, _drv_info_, ("rf:%x\n", pwiparam->IoValue)); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)( poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro8711_pkt_loss_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(uint)*2) { ++ RT_TRACE(_module_mp_, _drv_err_, ("-oid_rt_pro8711_pkt_loss_hdl: buf_len=%d\n", (int)poid_par_priv->information_buf_len)); ++ return NDIS_STATUS_INVALID_LENGTH; ++ } ++ ++ if (*(uint*)poid_par_priv->information_buf == 1)//init==1 ++ Adapter->mppriv.rx_pktloss = 0; ++ ++ *((uint*)poid_par_priv->information_buf+1) = Adapter->mppriv.rx_pktloss; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_rd_attrib_mem_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)( poid_par_priv->adapter_context); ++ struct io_queue *pio_queue = (struct io_queue *)Adapter->pio_queue; ++ struct intf_hdl *pintfhdl = &pio_queue->intf; ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++#ifdef CONFIG_SDIO_HCI ++ void (*_attrib_read)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++#endif ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+Query OID_RT_RD_ATTRIB_MEM\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++#ifdef CONFIG_SDIO_HCI ++ _irqlevel_changed_(&oldirql, LOWER); ++{ ++ u32 *plmem = (u32*)poid_par_priv->information_buf+2; ++ _attrib_read = pintfhdl->io_ops._attrib_read; ++ _attrib_read(pintfhdl, *((u32*)poid_par_priv->information_buf), ++ *((u32*)poid_par_priv->information_buf+1), (u8*)plmem); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++} ++ _irqlevel_changed_(&oldirql, RAISE); ++#endif ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_wr_attrib_mem_hdl (struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ struct io_queue *pio_queue = (struct io_queue *)Adapter->pio_queue; ++ struct intf_hdl *pintfhdl = &pio_queue->intf; ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++#ifdef CONFIG_SDIO_HCI ++ void (*_attrib_write)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++#endif ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++#ifdef CONFIG_SDIO_HCI ++ _irqlevel_changed_(&oldirql, LOWER); ++{ ++ u32 *plmem = (u32*)poid_par_priv->information_buf + 2; ++ _attrib_write = pintfhdl->io_ops._attrib_write; ++ _attrib_write(pintfhdl, *(u32*)poid_par_priv->information_buf, ++ *((u32*)poid_par_priv->information_buf+1), (u8*)plmem); ++} ++ _irqlevel_changed_(&oldirql, RAISE); ++#endif ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+OID_RT_PRO_SET_RF_INTFS\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (rtw_setrfintfs_cmd(Adapter, *(unsigned char*)poid_par_priv->information_buf) == _FAIL) ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_poll_rx_status_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _rtw_memcpy(poid_par_priv->information_buf, (unsigned char*)&Adapter->mppriv.rxstat, sizeof(struct recv_stat)); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ PCFG_DBG_MSG_STRUCT pdbg_msg; ++ ++_func_enter_; ++ ++// RT_TRACE(0xffffffffff,_drv_alert_,("===> oid_rt_pro_cfg_debug_message_hdl.\n")); ++ ++#if 0//#ifdef CONFIG_DEBUG_RTL871X ++ ++ pdbg_msg = (PCFG_DBG_MSG_STRUCT)(poid_par_priv->information_buf); ++ ++ if (poid_par_priv->type_of_oid == SET_OID) { ++ RT_TRACE(0xffffffffff, _drv_alert_, ++ ("===>Set level :0x%08x, H32:0x%08x L32:0x%08x\n", ++ pdbg_msg->DebugLevel, pdbg_msg->DebugComponent_H32, pdbg_msg->DebugComponent_L32)); ++ ++ GlobalDebugLevel = pdbg_msg->DebugLevel; ++ GlobalDebugComponents = (pdbg_msg->DebugComponent_H32 << 32) | pdbg_msg->DebugComponent_L32; ++ RT_TRACE(0xffffffffff, _drv_alert_, ++ ("===> Set level :0x%08x, component:0x%016x\n", ++ GlobalDebugLevel, (u32)GlobalDebugComponents)); ++ } else { ++ pdbg_msg->DebugLevel = GlobalDebugLevel; ++ pdbg_msg->DebugComponent_H32 = (u32)(GlobalDebugComponents >> 32); ++ pdbg_msg->DebugComponent_L32 = (u32)GlobalDebugComponents; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(0xffffffffff, _drv_alert_, ++ ("===>Query level:0x%08x H32:0x%08x L32:0x%08x\n", ++ (u32)pdbg_msg->DebugLevel, (u32)pdbg_msg->DebugComponent_H32, (u32)pdbg_msg->DebugComponent_L32)); ++ } ++ ++#endif ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+OID_RT_PRO_SET_DATA_RATE_EX\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (rtw_setdatarate_cmd(Adapter, poid_par_priv->information_buf) !=_SUCCESS) ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//----------------------------------------------------------------------------- ++NDIS_STATUS oid_rt_get_thermal_meter_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ u8 thermal = 0; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_get_thermal_meter_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ GetThermalMeter(Adapter, &thermal); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *(u32*)poid_par_priv->information_buf = (u32)thermal; ++ *poid_par_priv->bytes_rw = sizeof(u32); ++ ++_func_exit_; ++ ++ return status; ++} ++//----------------------------------------------------------------------------- ++NDIS_STATUS oid_rt_pro_read_tssi_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_tssi_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (Adapter->mppriv.act_in_progress == _TRUE) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u8)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ //init workparam ++ Adapter->mppriv.act_in_progress = _TRUE; ++ Adapter->mppriv.workparam.bcompleted = _FALSE; ++ Adapter->mppriv.workparam.act_type = MPT_READ_TSSI; ++ Adapter->mppriv.workparam.io_offset = 0; ++ Adapter->mppriv.workparam.io_value = 0xFFFFFFFF; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (!rtw_gettssi_cmd(Adapter,0, (u8*)&Adapter->mppriv.workparam.io_value)) ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ ++_func_enter_; ++ ++// if (poid_par_priv->type_of_oid != SET_OID) ++// return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u8)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ if (poid_par_priv->type_of_oid == SET_OID) { ++ u8 enable; ++ ++ enable = *(u8*)poid_par_priv->information_buf; ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("+oid_rt_pro_set_power_tracking_hdl: enable=%d\n", enable)); ++ ++ SetPowerTracking(Adapter, enable); ++ } else { ++ GetPowerTracking(Adapter, (u8*)poid_par_priv->information_buf); ++ } ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//----------------------------------------------------------------------------- ++NDIS_STATUS oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u32 ratevalue; ++ u8 datarates[NumRates]; ++ int i; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+OID_RT_PRO_SET_BASIC_RATE\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++#if 0 ++ ratevalue = *((u32*)poid_par_priv->information_buf); ++ ++ for (i = 0; i < NumRates; i++) { ++ if (ratevalue == mpdatarate[i]) ++ datarates[i] = mpdatarate[i]; ++ else ++ datarates[i] = 0xff; ++ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_info_, ("basicrate_inx=%d\n", datarates[i])); ++ } ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (rtw_setbasicrate_cmd(padapter, datarates) != _SUCCESS) ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++#endif ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-OID_RT_PRO_SET_BASIC_RATE: status=0x%08X\n", status)); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < 8) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ *poid_par_priv->bytes_rw = 8; ++ _rtw_memcpy(poid_par_priv->information_buf, &(Adapter->pwrctrlpriv.pwr_mode), 8); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_pro_qry_pwrstate_hdl: pwr_mode=%d smart_ps=%d\n", ++ Adapter->pwrctrlpriv.pwr_mode, Adapter->pwrctrlpriv.smart_ps)); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ uint pwr_mode, smart_ps; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_SET_PWRSTATE\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_rw = 0; ++ *poid_par_priv->bytes_needed = 8; ++ ++ if (poid_par_priv->information_buf_len < 8) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pwr_mode = *(uint *)(poid_par_priv->information_buf); ++ smart_ps = *(uint *)((int)poid_par_priv->information_buf + 4); ++ ++ *poid_par_priv->bytes_rw = 8; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ struct setratable_parm *prate_table; ++ u8 res; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_needed = sizeof(struct setratable_parm); ++ if (poid_par_priv->information_buf_len < sizeof(struct setratable_parm)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ prate_table = (struct setratable_parm*)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ res = rtw_setrttbl_cmd(Adapter, prate_table); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ if (res == _FAIL) ++ status = NDIS_STATUS_FAILURE; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ #if 0 ++ struct mp_wi_cntx *pmp_wi_cntx=&(Adapter->mppriv.wi_cntx); ++ u8 res=_SUCCESS; ++ DEBUG_INFO(("===> Set OID_RT_PRO_H2C_GET_RATE_TABLE.\n")); ++ ++ if(pmp_wi_cntx->bmp_wi_progress ==_TRUE){ ++ DEBUG_ERR(("\n mp workitem is progressing, not allow to set another workitem right now!!!\n")); ++ Status = NDIS_STATUS_NOT_ACCEPTED; ++ break; ++ } ++ else{ ++ pmp_wi_cntx->bmp_wi_progress=_TRUE; ++ pmp_wi_cntx->param.bcompleted=_FALSE; ++ pmp_wi_cntx->param.act_type=MPT_GET_RATE_TABLE; ++ pmp_wi_cntx->param.io_offset=0x0; ++ pmp_wi_cntx->param.bytes_cnt=sizeof(struct getratable_rsp); ++ pmp_wi_cntx->param.io_value=0xffffffff; ++ ++ res=rtw_getrttbl_cmd(Adapter,(struct getratable_rsp *)pmp_wi_cntx->param.data); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ if(res != _SUCCESS) ++ { ++ Status = NDIS_STATUS_NOT_ACCEPTED; ++ } ++ } ++ DEBUG_INFO(("\n <=== Set OID_RT_PRO_H2C_GET_RATE_TABLE.\n")); ++ #endif ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++ ++//**************** oid_rtl_seg_87_12_00 section start **************** ++NDIS_STATUS oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ struct security_priv *psecuritypriv = &Adapter->securitypriv; ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ ENCRY_CTRL_STATE encry_mode; ++ ++ ++ *poid_par_priv->bytes_needed = sizeof(u8); ++ if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ if (poid_par_priv->type_of_oid == SET_OID) ++ { ++ encry_mode = *((u8*)poid_par_priv->information_buf); ++ switch (encry_mode) ++ { ++ case HW_CONTROL: ++ #if 0 ++ Adapter->registrypriv.software_decrypt=_FALSE; ++ Adapter->registrypriv.software_encrypt=_FALSE; ++ #else ++ psecuritypriv->sw_decrypt = _FALSE; ++ psecuritypriv->sw_encrypt = _FALSE; ++ #endif ++ break; ++ case SW_CONTROL: ++ #if 0 ++ Adapter->registrypriv.software_decrypt=_TRUE; ++ Adapter->registrypriv.software_encrypt=_TRUE; ++ #else ++ psecuritypriv->sw_decrypt = _TRUE; ++ psecuritypriv->sw_encrypt = _TRUE; ++ #endif ++ break; ++ case HW_ENCRY_SW_DECRY: ++ #if 0 ++ Adapter->registrypriv.software_decrypt=_TRUE; ++ Adapter->registrypriv.software_encrypt=_FALSE; ++ #else ++ psecuritypriv->sw_decrypt = _TRUE; ++ psecuritypriv->sw_encrypt = _FALSE; ++ #endif ++ break; ++ case SW_ENCRY_HW_DECRY: ++ #if 0 ++ Adapter->registrypriv.software_decrypt=_FALSE; ++ Adapter->registrypriv.software_encrypt=_TRUE; ++ #else ++ psecuritypriv->sw_decrypt = _FALSE; ++ psecuritypriv->sw_encrypt = _TRUE; ++ #endif ++ break; ++ } ++ ++ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_notice_, ++ ("-oid_rt_pro_encryption_ctrl_hdl: SET encry_mode=0x%x sw_encrypt=0x%x sw_decrypt=0x%x\n", ++ encry_mode, psecuritypriv->sw_encrypt, psecuritypriv->sw_decrypt)); ++ } ++ else { ++ #if 0 ++ if (Adapter->registrypriv.software_encrypt == _FALSE) { ++ if (Adapter->registrypriv.software_decrypt == _FALSE) ++ encry_mode = HW_CONTROL; ++ else ++ encry_mode = HW_ENCRY_SW_DECRY; ++ } ++ else { ++ if (Adapter->registrypriv.software_decrypt == _FALSE) ++ encry_mode = SW_ENCRY_HW_DECRY; ++ else ++ encry_mode = SW_CONTROL; ++ } ++ #else ++ ++ if ((psecuritypriv->sw_encrypt == _FALSE) && (psecuritypriv->sw_decrypt == _FALSE)) ++ encry_mode = HW_CONTROL; ++ else if ((psecuritypriv->sw_encrypt == _FALSE) && (psecuritypriv->sw_decrypt == _TRUE)) ++ encry_mode = HW_ENCRY_SW_DECRY; ++ else if ((psecuritypriv->sw_encrypt == _TRUE) && (psecuritypriv->sw_decrypt == _FALSE)) ++ encry_mode = SW_ENCRY_HW_DECRY; ++ else if ((psecuritypriv->sw_encrypt == _TRUE) && (psecuritypriv->sw_decrypt == _TRUE)) ++ encry_mode = SW_CONTROL; ++ ++ #endif ++ ++ *(u8*)poid_par_priv->information_buf = encry_mode; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_pro_encryption_ctrl_hdl: QUERY encry_mode=0x%x\n", ++ encry_mode)); ++ } ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_add_sta_info_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ struct sta_info *psta = NULL; ++ UCHAR *macaddr; ++ ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_needed = ETH_ALEN; ++ if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ macaddr = (UCHAR *) poid_par_priv->information_buf ; ++ ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_notice_, ++ ("OID_RT_PRO_ADD_STA_INFO: addr="MAC_FMT"\n", MAC_ARG(macaddr) )); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ psta = rtw_get_stainfo(&Adapter->stapriv, macaddr); ++ ++ if (psta == NULL) { // the sta have been in sta_info_queue => do nothing ++ psta = rtw_alloc_stainfo(&Adapter->stapriv, macaddr); ++ ++ if (psta == NULL) { ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("Can't alloc sta_info when OID_RT_PRO_ADD_STA_INFO\n")); ++ status = NDIS_STATUS_FAILURE; ++ } ++ } else { //(between drv has received this event before and fw have not yet to set key to CAM_ENTRY) ++ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_err_, ++ ("Error: OID_RT_PRO_ADD_STA_INFO: sta has been in sta_hash_queue \n")); ++ } ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ struct sta_info *psta = NULL; ++ UCHAR *macaddr; ++ ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_needed = ETH_ALEN; ++ if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ macaddr = (UCHAR *) poid_par_priv->information_buf ; ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_notice_, ++ ("+OID_RT_PRO_ADD_STA_INFO: addr="MAC_FMT"\n", MAC_ARG(macaddr) )); ++ ++ psta = rtw_get_stainfo(&Adapter->stapriv, macaddr); ++ if (psta != NULL) { ++ _enter_critical(&(Adapter->stapriv.sta_hash_lock), &irqL); ++ rtw_free_stainfo(Adapter, psta); ++ _exit_critical(&(Adapter->stapriv.sta_hash_lock), &irqL); ++ } ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++#if 0 ++#include ++static u32 mp_query_drv_var(_adapter *padapter, u8 offset, u32 var) ++{ ++#ifdef CONFIG_SDIO_HCI ++ ++ if (offset == 1) { ++ u16 tmp_blk_num; ++ tmp_blk_num = rtw_read16(padapter, SDIO_RX0_RDYBLK_NUM); ++ RT_TRACE(_module_mp_, _drv_err_, ("Query Information, mp_query_drv_var SDIO_RX0_RDYBLK_NUM=0x%x adapter_to_dvobj(padapter)->rxblknum=0x%x\n", tmp_blk_num, adapter_to_dvobj(padapter)->rxblknum)); ++ if (adapter_to_dvobj(padapter)->rxblknum != tmp_blk_num) { ++ RT_TRACE(_module_mp_,_drv_err_, ("Query Information, mp_query_drv_var call recv rx\n")); ++ // sd_recv_rxfifo(padapter); ++ } ++ } ++ ++#if 0 ++ if(offset <=100){ //For setting data rate and query data rate ++ if(offset==100){ //For query data rate ++ RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d): query rate=0x%.2x \n",offset,padapter->registrypriv.tx_rate)); ++ var=padapter->registrypriv.tx_rate; ++ ++ } ++ else if(offset<0x1d){ //For setting data rate ++ padapter->registrypriv.tx_rate=offset; ++ var=padapter->registrypriv.tx_rate; ++ padapter->registrypriv.use_rate=_TRUE; ++ RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d): set rate=0x%.2x \n",offset,padapter->registrypriv.tx_rate)); ++ } ++ else{ //not use the data rate ++ padapter->registrypriv.use_rate=_FALSE; ++ RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d) out of rate range\n",offset)); ++ } ++ } ++ else if (offset<=110){ //for setting debug level ++ RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d) for set debug level\n",offset)); ++ if(offset==110){ //For query data rate ++ RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d): query dbg level=0x%.2x \n",offset,padapter->registrypriv.dbg_level)); ++ padapter->registrypriv.dbg_level=GlobalDebugLevel; ++ var=padapter->registrypriv.dbg_level; ++ } ++ else if(offset<110 && offset>100){ ++ RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d): set dbg level=0x%.2x \n",offset,offset-100)); ++ padapter->registrypriv.dbg_level=GlobalDebugLevel=offset-100; ++ var=padapter->registrypriv.dbg_level; ++ RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var(_drv_emerg_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_alert_, (" mp_query_drv_var(_drv_alert_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_crit_, (" mp_query_drv_var(_drv_crit_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_err_, (" mp_query_drv_var(_drv_err_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_warning_, (" mp_query_drv_var(_drv_warning_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_notice_, (" mp_query_drv_var(_drv_notice_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_info_, (" mp_query_drv_var(_drv_info_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ RT_TRACE(_module_mp_, _drv_debug_, (" mp_query_drv_var(_drv_debug_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel)); ++ ++ } ++ } ++ else if(offset >110 &&offset <116){ ++ if(115==offset){ ++ RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var(_drv_emerg_): offset(%d): query TRX access type: [tx_block_mode=%x,rx_block_mode=%x]\n",\ ++ offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode)); ++ } ++ else { ++ switch(offset){ ++ case 111: ++ adapter_to_dvobj(padapter)->tx_block_mode=1; ++ adapter_to_dvobj(padapter)->rx_block_mode=1; ++ RT_TRACE(_module_mp_, _drv_emerg_, \ ++ (" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX block/RX block) [tx_block_mode=%x,rx_block_mode=%x]\n",\ ++ offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode)); ++ break; ++ case 112: ++ adapter_to_dvobj(padapter)->tx_block_mode=1; ++ adapter_to_dvobj(padapter)->rx_block_mode=0; ++ RT_TRACE(_module_mp_, _drv_emerg_, \ ++ (" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX block/RX byte) [tx_block_mode=%x,rx_block_mode=%x]\n",\ ++ offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode)); ++ break; ++ case 113: ++ adapter_to_dvobj(padapter)->tx_block_mode=0; ++ adapter_to_dvobj(padapter)->rx_block_mode=1; ++ RT_TRACE(_module_mp_, _drv_emerg_, \ ++ (" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX byte/RX block) [tx_block_mode=%x,rx_block_mode=%x]\n",\ ++ offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode)); ++ break; ++ case 114: ++ adapter_to_dvobj(padapter)->tx_block_mode=0; ++ adapter_to_dvobj(padapter)->rx_block_mode=0; ++ RT_TRACE(_module_mp_, _drv_emerg_, \ ++ (" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX byte/RX byte) [tx_block_mode=%x,rx_block_mode=%x]\n",\ ++ offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode)); ++ break; ++ default : ++ break; ++ ++ } ++ ++ } ++ ++ } ++ else if(offset>=127){ ++ u64 prnt_dbg_comp; ++ u8 chg_idx; ++ u64 tmp_dbg_comp; ++ chg_idx=offset-0x80; ++ tmp_dbg_comp=BIT(chg_idx); ++ prnt_dbg_comp=padapter->registrypriv.dbg_component= GlobalDebugComponents; ++ RT_TRACE(_module_mp_, _drv_emerg_, (" 1: mp_query_drv_var: offset(%d;0x%x):for dbg conpoment prnt_dbg_comp=0x%.16x GlobalDebugComponents=0x%.16x padapter->registrypriv.dbg_component=0x%.16x\n",offset,offset,prnt_dbg_comp,GlobalDebugComponents,padapter->registrypriv.dbg_component)); ++ if(offset==127){ ++ // prnt_dbg_comp=padapter->registrypriv.dbg_component= GlobalDebugComponents; ++ var=(u32)(padapter->registrypriv.dbg_component); ++ RT_TRACE(0xffffffff, _drv_emerg_, ("2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h) \n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp)); ++ prnt_dbg_comp=GlobalDebugComponents; ++ RT_TRACE(0xffffffff, _drv_emerg_, ("2-1: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp)); ++ prnt_dbg_comp=GlobalDebugComponents=padapter->registrypriv.dbg_component; ++ RT_TRACE(0xffffffff, _drv_emerg_, ("2-2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp)); ++ ++ } ++ else{ ++ RT_TRACE(0xffffffff, _drv_emerg_, ("3: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h) chg_idx=%d\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp,chg_idx)); ++ prnt_dbg_comp=GlobalDebugComponents; ++ RT_TRACE(0xffffffff, _drv_emerg_,("3-1: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h) chg_idx=%d\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp,chg_idx));// ("3-1: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment=0x%x chg_idx=%d or0x%x BIT(chg_idx[%d]=0x%x)\n",offset,offset,prnt_dbg_comp,chg_idx,chg_idx,(chg_idx),tmp_dbg_comp) ++ prnt_dbg_comp=GlobalDebugComponents=padapter->registrypriv.dbg_component; ++ RT_TRACE(0xffffffff, _drv_emerg_, ("3-2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp)); ++ ++ if(GlobalDebugComponents&tmp_dbg_comp){ ++ //this bit is already set, now clear it ++ GlobalDebugComponents=GlobalDebugComponents&(~tmp_dbg_comp); ++ } ++ else{ ++ //this bit is not set, now set it. ++ GlobalDebugComponents =GlobalDebugComponents|tmp_dbg_comp; ++ } ++ RT_TRACE(0xffffffff, _drv_emerg_, ("4: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment tmp_dbg_comp=0x%x GlobalDebugComponents=0x%x(l) 0x%x(h)",offset,offset,tmp_dbg_comp,prnt_dbg_comp)); ++ prnt_dbg_comp=GlobalDebugComponents; ++ RT_TRACE(0xffffffff, _drv_emerg_, ("4-1: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment tmp_dbg_comp=0x%x GlobalDebugComponents=0x%x(l) 0x%x(h)",offset,offset,tmp_dbg_comp,prnt_dbg_comp)); ++ ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_emerg_, ("0: mp_query_drv_var(_module_rtl871x_xmit_c_:0): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,prnt_dbg_comp)); ++ RT_TRACE(_module_xmit_osdep_c_, _drv_emerg_, ("1: mp_query_drv_var(_module_xmit_osdep_c_:1): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_emerg_, ("2: mp_query_drv_var(_module_rtl871x_recv_c_:2): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_recv_osdep_c_, _drv_emerg_, ("3: mp_query_drv_var(_module_recv_osdep_c_:3): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_emerg_, ("4: mp_query_drv_var(_module_rtl871x_mlme_c_:4): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_mlme_osdep_c_, _drv_emerg_, (" 5:mp_query_drv_var(_module_mlme_osdep_c_:5): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_sta_mgt_c_, _drv_emerg_, ("6: mp_query_drv_var(_module_rtl871x_sta_mgt_c_:6): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_cmd_c_, _drv_emerg_, ("7: mp_query_drv_var(_module_rtl871x_cmd_c_:7): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_cmd_osdep_c_, _drv_emerg_, ("8: mp_query_drv_var(_module_cmd_osdep_c_:8): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_io_c_, _drv_emerg_, ("9: mp_query_drv_var(_module_rtl871x_io_c_:9): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_io_osdep_c_, _drv_emerg_, ("10: mp_query_drv_var(_module_io_osdep_c_:10): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_os_intfs_c_, _drv_emerg_, ("11: mp_query_drv_var(_module_os_intfs_c_:11): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_security_c_, _drv_emerg_, ("12: mp_query_drv_var(_module_rtl871x_security_c_:12): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_eeprom_c_, _drv_emerg_, ("13: mp_query_drv_var(_module_rtl871x_eeprom_c_:13): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_hal_init_c_, _drv_emerg_, ("14: mp_query_drv_var(_module_hal_init_c_:14): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_hci_hal_init_c_, _drv_emerg_, ("15: mp_query_drv_var(_module_hci_hal_init_c_:15): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_ioctl_c_, _drv_emerg_, ("16: mp_query_drv_var(_module_rtl871x_ioctl_c_:16): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_emerg_, ("17: mp_query_drv_var(_module_rtl871x_ioctl_set_c_:17): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_ioctl_query_c_, _drv_emerg_, ("18: mp_query_drv_var(_module_rtl871x_ioctl_query_c_:18): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_emerg_, ("19: mp_query_drv_var(_module_rtl871x_pwrctrl_c_:19): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_hci_intfs_c_, _drv_emerg_, ("20: mp_query_drv_var(_module_hci_intfs_c_:20): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_hci_ops_c_, _drv_emerg_, ("21: mp_query_drv_var(_module_hci_ops_c_:21): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_osdep_service_c_, _drv_emerg_, ("22: mp_query_drv_var(_module_osdep_service_c_:22): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_mp_, _drv_emerg_, ("23: mp_query_drv_var(_module_mp_:23): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ RT_TRACE(_module_hci_ops_os_c_, _drv_emerg_, ("24: mp_query_drv_var(_module_hci_ops_os_c_:24): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ var=(u32)(GlobalDebugComponents); ++ //GlobalDebugComponents=padapter->registrypriv.dbg_component; ++ RT_TRACE(0xffffffff, _drv_emerg_, (" ==mp_query_drv_var(_module_mp_): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents)); ++ ++ } ++ } ++ else{ ++ RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d) >110\n",offset)); ++ } ++#endif ++#endif ++ ++ return var; ++} ++#endif ++ ++NDIS_STATUS oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ DR_VARIABLE_STRUCT *pdrv_var; ++ ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ *poid_par_priv->bytes_needed = sizeof(DR_VARIABLE_STRUCT); ++ if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+Query Information, OID_RT_PRO_QUERY_DR_VARIABLE\n")); ++ ++ pdrv_var = (struct _DR_VARIABLE_STRUCT_ *)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ pdrv_var->variable = mp_query_drv_var(Adapter, pdrv_var->offset, pdrv_var->variable); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-oid_rt_pro_query_dr_variable_hdl: offset=0x%x valule=0x%x\n", ++ pdrv_var->offset, pdrv_var->variable)); ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ RT_TRACE(_module_mp_, _drv_err_, ("oid_rt_pro_rx_packet_type_hdl...................\n")); ++ ++ if (poid_par_priv->information_buf_len < sizeof (UCHAR)) { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ *poid_par_priv->bytes_needed = sizeof(UCHAR); ++ return status; ++ } ++ ++ if (poid_par_priv->type_of_oid == SET_OID) { ++ Adapter->mppriv.rx_with_status = *(UCHAR *) poid_par_priv->information_buf; ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_, ("Query Information, OID_RT_PRO_RX_PACKET_TYPE:%d \n",\ ++ Adapter->mppriv.rx_with_status)); ++ ++ //*(u32 *)&Adapter->eeprompriv.mac_addr[0]=rtw_read32(Adapter, 0x10250050); ++ //*(u16 *)&Adapter->eeprompriv.mac_addr[4]=rtw_read16(Adapter, 0x10250054); ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("MAC addr=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x \n", ++ Adapter->eeprompriv.mac_addr[0],Adapter->eeprompriv.mac_addr[1],Adapter->eeprompriv.mac_addr[2],\ ++ Adapter->eeprompriv.mac_addr[3],Adapter->eeprompriv.mac_addr[4],Adapter->eeprompriv.mac_addr[5])); ++ ++ } ++ else { ++ *(UCHAR *) poid_par_priv->information_buf = Adapter->mppriv.rx_with_status; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_, ("Query Information, OID_RT_PRO_RX_PACKET_TYPE:%d \n", \ ++ Adapter->mppriv.rx_with_status)); ++ ++ //*(u32 *)&Adapter->eeprompriv.mac_addr[0]=rtw_read32(Adapter, 0x10250050); ++ //*(u16 *)&Adapter->eeprompriv.mac_addr[4]=rtw_read16(Adapter, 0x10250054); ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("MAC addr=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x \n", ++ Adapter->eeprompriv.mac_addr[0],Adapter->eeprompriv.mac_addr[1],Adapter->eeprompriv.mac_addr[2],\ ++ Adapter->eeprompriv.mac_addr[3],Adapter->eeprompriv.mac_addr[4],Adapter->eeprompriv.mac_addr[5])); ++ } ++#endif ++ ++ return NDIS_STATUS_SUCCESS; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ PEFUSE_ACCESS_STRUCT pefuse; ++ u8 *data; ++ u16 addr = 0, cnts = 0, max_available_size = 0; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(EFUSE_ACCESS_STRUCT)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ pefuse = (PEFUSE_ACCESS_STRUCT)poid_par_priv->information_buf; ++ addr = pefuse->start_addr; ++ cnts = pefuse->cnts; ++ data = pefuse->data; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("+oid_rt_pro_read_efuse_hd: buf_len=%ld addr=%d cnts=%d\n", ++ poid_par_priv->information_buf_len, addr, cnts)); ++ ++ EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if ((addr + cnts) > max_available_size) { ++ RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_read_efuse_hdl: parameter error!\n")); ++ return NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ if (rtw_efuse_access(Adapter, _FALSE, addr, cnts, data) == _FAIL) { ++ RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_read_efuse_hdl: rtw_efuse_access FAIL!\n")); ++ status = NDIS_STATUS_FAILURE; ++ } else ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ PEFUSE_ACCESS_STRUCT pefuse; ++ u8 *data; ++ u16 addr = 0, cnts = 0, max_available_size = 0; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ pefuse = (PEFUSE_ACCESS_STRUCT)poid_par_priv->information_buf; ++ addr = pefuse->start_addr; ++ cnts = pefuse->cnts; ++ data = pefuse->data; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("+oid_rt_pro_write_efuse_hdl: buf_len=%ld addr=0x%04x cnts=%d\n", ++ poid_par_priv->information_buf_len, addr, cnts)); ++ ++ EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if ((addr + cnts) > max_available_size) { ++ RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_write_efuse_hdl: parameter error")); ++ return NDIS_STATUS_NOT_ACCEPTED; ++ } ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ if (rtw_efuse_access(Adapter, _TRUE, addr, cnts, data) == _FAIL) ++ status = NDIS_STATUS_FAILURE; ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ PPGPKT_STRUCT ppgpkt; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++// RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_rw_efuse_pgpkt_hdl\n")); ++ ++ *poid_par_priv->bytes_rw = 0; ++ ++ if (poid_par_priv->information_buf_len < sizeof(PGPKT_STRUCT)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ ppgpkt = (PPGPKT_STRUCT)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (poid_par_priv->type_of_oid == QUERY_OID) ++ { ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_rw_efuse_pgpkt_hdl: Read offset=0x%x\n",\ ++ ppgpkt->offset)); ++ ++ Efuse_PowerSwitch(Adapter, _FALSE, _TRUE); ++ if (Efuse_PgPacketRead(Adapter, ppgpkt->offset, ppgpkt->data, _FALSE) == _TRUE) ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ else ++ status = NDIS_STATUS_FAILURE; ++ Efuse_PowerSwitch(Adapter, _FALSE, _FALSE); ++ } else { ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("oid_rt_pro_rw_efuse_pgpkt_hdl: Write offset=0x%x word_en=0x%x\n",\ ++ ppgpkt->offset, ppgpkt->word_en)); ++ ++ Efuse_PowerSwitch(Adapter, _TRUE, _TRUE); ++ if (Efuse_PgPacketWrite(Adapter, ppgpkt->offset, ppgpkt->word_en, ppgpkt->data, _FALSE) == _TRUE) ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ else ++ status = NDIS_STATUS_FAILURE; ++ Efuse_PowerSwitch(Adapter, _TRUE, _FALSE); ++ } ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("-oid_rt_pro_rw_efuse_pgpkt_hdl: status=0x%08X\n", status)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u16 size; ++ u8 ret; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len information_buf = size; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ } else ++ status = NDIS_STATUS_FAILURE; ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_efuse_max_size_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ *(u32*)poid_par_priv->information_buf = efuse_GetMaxSize(Adapter); ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("-oid_rt_get_efuse_max_size_hdl: size=%d status=0x%08X\n", ++ *(int*)poid_par_priv->information_buf, status)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_efuse_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid == QUERY_OID) ++ status = oid_rt_pro_read_efuse_hdl(poid_par_priv); ++ else ++ status = oid_rt_pro_write_efuse_hdl(poid_par_priv); ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_efuse_hdl: status=0x%08X\n", status)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u8 *data; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ u16 mapLen=0; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_efuse_map_hdl\n")); ++ ++ EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE); ++ ++ *poid_par_priv->bytes_rw = 0; ++ ++ if (poid_par_priv->information_buf_len < mapLen) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ data = (u8*)poid_par_priv->information_buf; ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ if (poid_par_priv->type_of_oid == QUERY_OID) ++ { ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("oid_rt_pro_efuse_map_hdl: READ\n")); ++ ++ if (rtw_efuse_map_read(Adapter, 0, mapLen, data) == _SUCCESS) ++ *poid_par_priv->bytes_rw = mapLen; ++ else { ++ RT_TRACE(_module_mp_, _drv_err_, ++ ("oid_rt_pro_efuse_map_hdl: READ fail\n")); ++ status = NDIS_STATUS_FAILURE; ++ } ++ } else { ++ // SET_OID ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("oid_rt_pro_efuse_map_hdl: WRITE\n")); ++ ++ if (rtw_efuse_map_write(Adapter, 0, mapLen, data) == _SUCCESS) ++ *poid_par_priv->bytes_rw = mapLen; ++ else { ++ RT_TRACE(_module_mp_, _drv_err_, ++ ("oid_rt_pro_efuse_map_hdl: WRITE fail\n")); ++ status = NDIS_STATUS_FAILURE; ++ } ++ } ++ ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("-oid_rt_pro_efuse_map_hdl: status=0x%08X\n", status)); ++ ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_set_crystal_cap_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ ++ u32 crystal_cap = 0; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len information_buf);//4 ++ if (crystal_cap > 0xf) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ Adapter->mppriv.curr_crystalcap = crystal_cap; ++ ++ _irqlevel_changed_(&oldirql,LOWER); ++ SetCrystalCap(Adapter); ++ _irqlevel_changed_(&oldirql,RAISE); ++ ++_func_exit_; ++ ++#endif ++ return status; ++} ++ ++NDIS_STATUS oid_rt_set_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u8 rx_pkt_type; ++// u32 rcr_val32; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++// PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_set_rx_packet_type_hdl\n")); ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u8)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ rx_pkt_type = *((u8*)poid_par_priv->information_buf);//4 ++ ++ RT_TRACE(_module_mp_, _drv_info_, ("rx_pkt_type: %x\n",rx_pkt_type )); ++#if 0 ++ _irqlevel_changed_(&oldirql, LOWER); ++#if 0 ++ rcr_val8 = rtw_read8(Adapter, 0x10250048);//RCR ++ rcr_val8 &= ~(RCR_AB|RCR_AM|RCR_APM|RCR_AAP); ++ ++ if(rx_pkt_type == RX_PKT_BROADCAST){ ++ rcr_val8 |= (RCR_AB | RCR_ACRC32 ); ++ } ++ else if(rx_pkt_type == RX_PKT_DEST_ADDR){ ++ rcr_val8 |= (RCR_AAP| RCR_AM |RCR_ACRC32); ++ } ++ else if(rx_pkt_type == RX_PKT_PHY_MATCH){ ++ rcr_val8 |= (RCR_APM|RCR_ACRC32); ++ } ++ else{ ++ rcr_val8 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32); ++ } ++ rtw_write8(padapter, 0x10250048,rcr_val8); ++#else ++ rcr_val32 = rtw_read32(padapter, RCR);//RCR = 0x10250048 ++ rcr_val32 &= ~(RCR_CBSSID|RCR_AB|RCR_AM|RCR_APM|RCR_AAP); ++#if 0 ++ if(rx_pkt_type == RX_PKT_BROADCAST){ ++ rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32); ++ } ++ else if(rx_pkt_type == RX_PKT_DEST_ADDR){ ++ //rcr_val32 |= (RCR_CBSSID|RCR_AAP|RCR_AM|RCR_ACRC32); ++ rcr_val32 |= (RCR_CBSSID|RCR_APM|RCR_ACRC32); ++ } ++ else if(rx_pkt_type == RX_PKT_PHY_MATCH){ ++ rcr_val32 |= (RCR_APM|RCR_ACRC32); ++ //rcr_val32 |= (RCR_AAP|RCR_ACRC32); ++ } ++ else{ ++ rcr_val32 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32); ++ } ++#else ++ switch (rx_pkt_type) ++ { ++ case RX_PKT_BROADCAST : ++ rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32); ++ break; ++ case RX_PKT_DEST_ADDR : ++ rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32); ++ break; ++ case RX_PKT_PHY_MATCH: ++ rcr_val32 |= (RCR_APM|RCR_ACRC32); ++ break; ++ default: ++ rcr_val32 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32); ++ break; ++ } ++ ++ if (rx_pkt_type == RX_PKT_DEST_ADDR) { ++ padapter->mppriv.check_mp_pkt = 1; ++ } else { ++ padapter->mppriv.check_mp_pkt = 0; ++ } ++#endif ++ rtw_write32(padapter, RCR, rcr_val32); ++ ++#endif ++ _irqlevel_changed_(&oldirql, RAISE); ++#endif ++_func_exit_; ++ ++ return status; ++} ++ ++NDIS_STATUS oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ u32 txagc; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len < sizeof(u32)) ++ return NDIS_STATUS_INVALID_LENGTH; ++ ++ txagc = *(u32*)poid_par_priv->information_buf; ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("oid_rt_pro_set_tx_agc_offset_hdl: 0x%08x\n", txagc)); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ SetTxAGCOffset(Adapter, txagc); ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++ ++NDIS_STATUS oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++ ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ struct mp_priv *pmppriv = &Adapter->mppriv; ++ u32 type; ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) ++ return NDIS_STATUS_NOT_ACCEPTED; ++ ++ if (poid_par_priv->information_buf_len information_buf; ++ ++ if (_LOOPBOOK_MODE_ == type) { ++ pmppriv->mode = type; ++ set_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE); //append txdesc ++ RT_TRACE(_module_mp_, _drv_info_, ("test mode change to loopback mode:0x%08x.\n", get_fwstate(pmlmepriv))); ++ } else if (_2MAC_MODE_ == type){ ++ pmppriv->mode = type; ++ _clr_fwstate_(pmlmepriv, WIFI_MP_LPBK_STATE); ++ RT_TRACE(_module_mp_, _drv_info_, ("test mode change to 2mac mode:0x%08x.\n", get_fwstate(pmlmepriv))); ++ } else ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} ++ ++unsigned int mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ PMP_XMIT_PARM pparm; ++ PADAPTER padapter; ++ struct mp_priv *pmp_priv; ++ struct pkt_attrib *pattrib; ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("+%s\n", __func__)); ++ ++ pparm = (PMP_XMIT_PARM)poid_par_priv->information_buf; ++ padapter = (PADAPTER)poid_par_priv->adapter_context; ++ pmp_priv = &padapter->mppriv; ++ ++ if (poid_par_priv->type_of_oid == QUERY_OID) { ++ pparm->enable = !pmp_priv->tx.stop; ++ pparm->count = pmp_priv->tx.sended; ++ } else { ++ if (pparm->enable == 0) { ++ pmp_priv->tx.stop = 1; ++ } else if (pmp_priv->tx.stop == 1) { ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = pparm->count; ++ pmp_priv->tx.payload = pparm->payload_type; ++ pattrib = &pmp_priv->tx.attrib; ++ pattrib->pktlen = pparm->length; ++ _rtw_memcpy(pattrib->dst, pparm->da, ETH_ALEN); ++ SetPacketTx(padapter); ++ } else ++ return NDIS_STATUS_FAILURE; ++ } ++ ++ return NDIS_STATUS_SUCCESS; ++} ++ ++#if 0 ++unsigned int mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv) ++{ ++ unsigned char *pframe, *pmp_pkt; ++ struct ethhdr *pethhdr; ++ struct pkt_attrib *pattrib; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ int llc_sz, payload_len; ++ struct mp_xmit_frame *pxframe= NULL; ++ struct mp_xmit_packet *pmp_xmitpkt = (struct mp_xmit_packet*)param; ++ u8 addr3[] = {0x02, 0xE0, 0x4C, 0x87, 0x66, 0x55}; ++ ++// DBG_871X("+mp_ioctl_xmit_packet_hdl\n"); ++ ++ pxframe = alloc_mp_xmitframe(&padapter->mppriv); ++ if (pxframe == NULL) ++ { ++ DEBUG_ERR(("Can't alloc pmpframe %d:%s\n", __LINE__, __FILE__)); ++ return -1; ++ } ++ ++ //mp_xmit_pkt ++ payload_len = pmp_xmitpkt->len - 14; ++ pmp_pkt = (unsigned char*)pmp_xmitpkt->mem; ++ pethhdr = (struct ethhdr *)pmp_pkt; ++ ++ //DBG_871X("payload_len=%d, pkt_mem=0x%x\n", pmp_xmitpkt->len, (void*)pmp_xmitpkt->mem); ++ ++ //DBG_871X("pxframe=0x%x\n", (void*)pxframe); ++ //DBG_871X("pxframe->mem=0x%x\n", (void*)pxframe->mem); ++ ++ //update attribute ++ pattrib = &pxframe->attrib; ++ memset((u8 *)(pattrib), 0, sizeof (struct pkt_attrib)); ++ pattrib->pktlen = pmp_xmitpkt->len; ++ pattrib->ether_type = ntohs(pethhdr->h_proto); ++ pattrib->hdrlen = 24; ++ pattrib->nr_frags = 1; ++ pattrib->priority = 0; ++#ifndef CONFIG_MP_LINUX ++ if(IS_MCAST(pethhdr->h_dest)) ++ pattrib->mac_id = 4; ++ else ++ pattrib->mac_id = 5; ++#else ++ pattrib->mac_id = 5; ++#endif ++ ++ // ++ memset(pxframe->mem, 0 , WLANHDR_OFFSET); ++ pframe = (u8 *)(pxframe->mem) + WLANHDR_OFFSET; ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ SetFrameSubType(pframe, WIFI_DATA); ++ ++ _rtw_memcpy(pwlanhdr->addr1, pethhdr->h_dest, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pethhdr->h_source, ETH_ALEN); ++ ++ _rtw_memcpy(pwlanhdr->addr3, addr3, ETH_ALEN); ++ ++ pwlanhdr->seq_ctl = 0; ++ pframe += pattrib->hdrlen; ++ ++ llc_sz= rtw_put_snap(pframe, pattrib->ether_type); ++ pframe += llc_sz; ++ ++ _rtw_memcpy(pframe, (void*)(pmp_pkt+14), payload_len); ++ ++ pattrib->last_txcmdsz = pattrib->hdrlen + llc_sz + payload_len; ++ ++ DEBUG_INFO(("issuing mp_xmit_frame, tx_len=%d, ether_type=0x%x\n", pattrib->last_txcmdsz, pattrib->ether_type)); ++ xmit_mp_frame(padapter, pxframe); ++ ++ return _SUCCESS; ++} ++#endif ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#ifdef PLATFORM_OS_XP ++ _irqL oldirql; ++#endif ++ u8 bpwrup; ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++#ifdef PLATFORM_LINUX ++#ifdef CONFIG_SDIO_HCI ++ PADAPTER padapter = (PADAPTER)(poid_par_priv->adapter_context); ++#endif ++#endif ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != SET_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("\n ===> Setoid_rt_set_power_down_hdl.\n")); ++ ++ _irqlevel_changed_(&oldirql, LOWER); ++ ++ bpwrup = *(u8 *)poid_par_priv->information_buf; ++ //CALL the power_down function ++#ifdef PLATFORM_LINUX ++#ifdef CONFIG_SDIO_HCI ++ dev_power_down(padapter,bpwrup); ++#endif ++#endif ++ _irqlevel_changed_(&oldirql, RAISE); ++ ++ //DEBUG_ERR(("\n <=== Query OID_RT_PRO_READ_REGISTER. ++ // Add:0x%08x Width:%d Value:0x%08x\n",RegRWStruct->offset,RegRWStruct->width,RegRWStruct->value)); ++ ++_func_exit_; ++ ++ return status; ++} ++//------------------------------------------------------------------------------ ++NDIS_STATUS oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv) ++{ ++#if 0 ++ NDIS_STATUS status = NDIS_STATUS_SUCCESS; ++ PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context); ++//#ifdef PLATFORM_OS_XP ++// _irqL oldirql; ++//#endif ++ ++_func_enter_; ++ ++ if (poid_par_priv->type_of_oid != QUERY_OID) { ++ status = NDIS_STATUS_NOT_ACCEPTED; ++ return status; ++ } ++ if (poid_par_priv->information_buf_len < sizeof(u32)) { ++ status = NDIS_STATUS_INVALID_LENGTH; ++ return status; ++ } ++ ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("\n ===> oid_rt_get_power_mode_hdl.\n")); ++ ++// _irqlevel_changed_(&oldirql, LOWER); ++ *(int*)poid_par_priv->information_buf = Adapter->registrypriv.low_power ? POWER_LOW : POWER_NORMAL; ++ *poid_par_priv->bytes_rw = poid_par_priv->information_buf_len; ++// _irqlevel_changed_(&oldirql, RAISE); ++ ++_func_exit_; ++ ++ return status; ++#else ++ return 0; ++#endif ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c +new file mode 100644 +index 000000000000..8f6cad3ec3db +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c +@@ -0,0 +1,5293 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_P2P_C_ ++ ++#include ++#include ++#include ++ ++#ifdef CONFIG_P2P ++ ++int rtw_p2p_is_channel_list_ok( u8 desired_ch, u8* ch_list, u8 ch_cnt ) ++{ ++ int found = 0, i = 0; ++ ++ for( i = 0; i < ch_cnt; i++ ) ++ { ++ if ( ch_list[ i ] == desired_ch ) ++ { ++ found = 1; ++ break; ++ } ++ } ++ return( found ); ++} ++ ++int is_any_client_associated(_adapter *padapter) ++{ ++ return padapter->stapriv.asoc_list_cnt ? _TRUE : _FALSE; ++} ++ ++static u32 go_add_group_info_attr(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ u32 len=0; ++ u16 attr_len = 0; ++ u8 tmplen, *pdata_attr, *pstart, *pcur; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = pwdinfo->padapter; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ pdata_attr = rtw_zmalloc(MAX_P2P_IE_LEN); ++ ++ pstart = pdata_attr; ++ pcur = pdata_attr; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //look up sta asoc_queue ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ ++ plist = get_next(plist); ++ ++ ++ if(psta->is_p2p_device) ++ { ++ tmplen = 0; ++ ++ pcur++; ++ ++ //P2P device address ++ _rtw_memcpy(pcur, psta->dev_addr, ETH_ALEN); ++ pcur += ETH_ALEN; ++ ++ //P2P interface address ++ _rtw_memcpy(pcur, psta->hwaddr, ETH_ALEN); ++ pcur += ETH_ALEN; ++ ++ *pcur = psta->dev_cap; ++ pcur++; ++ ++ //*(u16*)(pcur) = cpu_to_be16(psta->config_methods); ++ RTW_PUT_BE16(pcur, psta->config_methods); ++ pcur += 2; ++ ++ _rtw_memcpy(pcur, psta->primary_dev_type, 8); ++ pcur += 8; ++ ++ *pcur = psta->num_of_secdev_type; ++ pcur++; ++ ++ _rtw_memcpy(pcur, psta->secdev_types_list, psta->num_of_secdev_type*8); ++ pcur += psta->num_of_secdev_type*8; ++ ++ if(psta->dev_name_len>0) ++ { ++ //*(u16*)(pcur) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ RTW_PUT_BE16(pcur, WPS_ATTR_DEVICE_NAME); ++ pcur += 2; ++ ++ //*(u16*)(pcur) = cpu_to_be16( psta->dev_name_len ); ++ RTW_PUT_BE16(pcur, psta->dev_name_len); ++ pcur += 2; ++ ++ _rtw_memcpy(pcur, psta->dev_name, psta->dev_name_len); ++ pcur += psta->dev_name_len; ++ } ++ ++ ++ tmplen = (u8)(pcur-pstart); ++ ++ *pstart = (tmplen-1); ++ ++ attr_len += tmplen; ++ ++ //pstart += tmplen; ++ pstart = pcur; ++ ++ } ++ ++ ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ if(attr_len>0) ++ { ++ len = rtw_set_p2p_attr_content(pbuf, P2P_ATTR_GROUP_INFO, attr_len, pdata_attr); ++ } ++ ++ rtw_mfree(pdata_attr, MAX_P2P_IE_LEN); ++ ++ return len; ++ ++} ++ ++static void issue_group_disc_req(struct wifidirect_info *pwdinfo, u8 *da) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ _adapter *padapter = pwdinfo->padapter; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ unsigned char category = RTW_WLAN_CATEGORY_P2P;//P2P action frame ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_GO_DISC_REQUEST; ++ u8 dialogToken=0; ++ ++ DBG_871X("[%s]\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pwdinfo->interface_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pwdinfo->interface_addr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //Build P2P action frame header ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ //there is no IE in this P2P action frame ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++static void issue_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *da, u8 status, u8 dialogToken) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ _adapter *padapter = pwdinfo->padapter; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_DEVDISC_RESP; ++ u8 p2pie[8] = { 0x00 }; ++ u32 p2pielen = 0; ++ ++ DBG_871X("[%s]\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pwdinfo->device_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pwdinfo->device_addr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //Build P2P public action frame header ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ ++ //Build P2P IE ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // P2P_ATTR_STATUS ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status); ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, p2pie, &pattrib->pktlen); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++static void issue_p2p_provision_resp(struct wifidirect_info *pwdinfo, u8* raddr, u8* frame_body, u16 config_method) ++{ ++ _adapter *padapter = pwdinfo->padapter; ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u8 dialogToken = frame_body[7]; // The Dialog Token of provisioning discovery request frame. ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_PROVISION_DISC_RESP; ++ u8 wpsie[ 100 ] = { 0x00 }; ++ u8 wpsielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ wpsielen = 0; ++ // WPS OUI ++ //*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ RTW_PUT_BE32(wpsie, WPSOUI); ++ wpsielen += 4; ++ ++#if 0 ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++#endif ++ ++ // Config Method ++ // Type: ++ //*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD ); ++ RTW_PUT_BE16(wpsie + wpsielen, WPS_ATTR_CONF_METHOD); ++ wpsielen += 2; ++ ++ // Length: ++ //*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ RTW_PUT_BE16(wpsie + wpsielen, 0x0002); ++ wpsielen += 2; ++ ++ // Value: ++ //*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( config_method ); ++ RTW_PUT_BE16(wpsie + wpsielen, config_method); ++ wpsielen += 2; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_provdisc_resp_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++ ++} ++ ++static void issue_p2p_presence_resp(struct wifidirect_info *pwdinfo, u8 *da, u8 status, u8 dialogToken) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ _adapter *padapter = pwdinfo->padapter; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ unsigned char category = RTW_WLAN_CATEGORY_P2P;//P2P action frame ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_PRESENCE_RESPONSE; ++ u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 }; ++ u8 noa_attr_content[32] = { 0x00 }; ++ u32 p2pielen = 0; ++ ++ DBG_871X("[%s]\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pwdinfo->interface_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pwdinfo->interface_addr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //Build P2P action frame header ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ ++ //Add P2P IE header ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ //Add Status attribute in P2P IE ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status); ++ ++ //Add NoA attribute in P2P IE ++ noa_attr_content[0] = 0x1;//index ++ noa_attr_content[1] = 0x0;//CTWindow and OppPS Parameters ++ ++ //todo: Notice of Absence Descriptor(s) ++ ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_NOA, 2, noa_attr_content); ++ ++ ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, p2pie, &(pattrib->pktlen)); ++ ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++} ++ ++u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 }; ++ u16 capability=0; ++ u32 len=0, p2pielen = 0; ++ ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ ++ // According to the P2P Specification, the beacon frame should contain 3 P2P attributes ++ // 1. P2P Capability ++ // 2. P2P Device ID ++ // 3. Notice of Absence ( NOA ) ++ ++ // P2P Capability ATTR ++ // Type: ++ // Length: ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ // Be able to participate in additional P2P Groups and ++ // support the P2P Invitation Procedure ++ // Group Capability Bitmap, 1 byte ++ capability = P2P_DEVCAP_INVITATION_PROC|P2P_DEVCAP_CLIENT_DISCOVERABILITY; ++ capability |= ((P2P_GRPCAP_GO | P2P_GRPCAP_INTRABSS) << 8); ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING)) ++ capability |= (P2P_GRPCAP_GROUP_FORMATION<<8); ++ ++ capability = cpu_to_le16(capability); ++ ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_CAPABILITY, 2, (u8*)&capability); ++ ++ ++ // P2P Device ID ATTR ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_DEVICE_ID, ETH_ALEN, pwdinfo->device_addr); ++ ++ ++ // Notice of Absence ATTR ++ // Type: ++ // Length: ++ // Value: ++ ++ //go_add_noa_attr(pwdinfo); ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len); ++ ++ ++ return len; ++ ++} ++ ++#ifdef CONFIG_WFD ++u32 build_beacon_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110812 ++ // According to the WFD Specification, the beacon frame should contain 4 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ++ // 3. Coupled Sink Information ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ ++ if ( P2P_ROLE_GO == pwdinfo->role ) ++ { ++ if ( is_any_client_associated( pwdinfo->padapter ) ) ++ { ++ // WFD primary sink + WiFi Direct mode + WSD (WFD Service Discovery) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD ); ++ } ++ else ++ { ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD (WFD Service Discovery) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ } ++ ++ } ++ else ++ { ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ } ++ ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_probe_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110812 ++ // According to the WFD Specification, the probe request frame should contain 4 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ++ // 3. Coupled Sink Information ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ ++ if ( 1 == pwdinfo->wfd_tdls_enable ) ++ { ++ // WFD primary sink + available for WFD session + WiFi TDLS mode + WSC ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | ++ WFD_DEVINFO_SESSION_AVAIL | ++ WFD_DEVINFO_WSD | ++ WFD_DEVINFO_PC_TDLS ); ++ } ++ else ++ { ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSC ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | ++ WFD_DEVINFO_SESSION_AVAIL | ++ WFD_DEVINFO_WSD ); ++ } ++ ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_probe_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 tunneled) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110812 ++ // According to the WFD Specification, the probe response frame should contain 4 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ++ // 3. Coupled Sink Information ++ // 4. WFD Session Information ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode ++ ++ if ( _TRUE == pwdinfo->session_available ) ++ { ++ if ( P2P_ROLE_GO == pwdinfo->role ) ++ { ++ if ( is_any_client_associated( pwdinfo->padapter ) ) ++ { ++ if ( pwdinfo->wfd_tdls_enable ) ++ { ++ // TDLS mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ else ++ { ++ // WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ } ++ else ++ { ++ if ( pwdinfo->wfd_tdls_enable ) ++ { ++ // available for WFD session + TDLS mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ else ++ { ++ // available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ } ++ } ++ else ++ { ++ if ( pwdinfo->wfd_tdls_enable ) ++ { ++ // available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ else ++ { ++ ++ // available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ } ++ } ++ else ++ { ++ if ( pwdinfo->wfd_tdls_enable ) ++ { ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD |WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ else ++ { ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT); ++ } ++ ++ } ++ ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ if ( P2P_ROLE_GO == pwdinfo->role ) ++ { ++ // WFD Session Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0000); ++ wfdielen += 2; ++ ++ // Todo: to add the list of WFD device info descriptor in WFD group. ++ ++ } ++#ifdef CONFIG_CONCURRENT_MODE ++#ifdef CONFIG_TDLS ++ if ( ( tunneled == 0 ) && ( padapter->pbuddy_adapter->wdinfo.wfd_tdls_enable == 1 ) ) ++ { ++ // Alternative MAC Address ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ALTER_MAC; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, ETH_ALEN ); ++ wfdielen += 2; ++ ++ // Value: ++ // Alternative MAC Address ++ _rtw_memcpy( wfdie + wfdielen, &padapter->pbuddy_adapter->eeprompriv.mac_addr[ 0 ], ETH_ALEN ); ++ // This mac address is used to make the WFD session when TDLS is enable. ++ ++ wfdielen += ETH_ALEN; ++ } ++#endif // CONFIG_TDLS ++#endif // CONFIG_CONCURRENT_MODE ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_assoc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = NULL; ++ struct mlme_priv *pmlmepriv = NULL; ++ struct wifi_display_info *pwfd_info = NULL; ++ ++ // WFD OUI ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ { ++ return 0; ++ } ++ ++ padapter = pwdinfo->padapter; ++ pmlmepriv = &padapter->mlmepriv; ++ pwfd_info = padapter->wdinfo.wfd_info; ++ ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110812 ++ // According to the WFD Specification, the probe request frame should contain 4 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ++ // 3. Coupled Sink Information ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_assoc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110812 ++ // According to the WFD Specification, the probe request frame should contain 4 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ++ // 3. Coupled Sink Information ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_nego_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_nego_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_nego_confirm_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_invitation_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ if ( P2P_ROLE_GO == pwdinfo->role ) ++ { ++ // WFD Session Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0000); ++ wfdielen += 2; ++ ++ // Todo: to add the list of WFD device info descriptor in WFD group. ++ ++ } ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_invitation_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ if ( P2P_ROLE_GO == pwdinfo->role ) ++ { ++ // WFD Session Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0000); ++ wfdielen += 2; ++ ++ // Todo: to add the list of WFD device info descriptor in WFD group. ++ ++ } ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_provdisc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_provdisc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 len=0, wfdielen = 0; ++ _adapter *padapter = pwdinfo->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info* pwfd_info = padapter->wdinfo.wfd_info; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the provision discovery response frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD ); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ wfdielen += ETH_ALEN; ++ ++ // Coupled Sink Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0007); ++ wfdielen += 2; ++ ++ // Value: ++ // Coupled Sink Status bitmap ++ // Not coupled/available for Coupling ++ wfdie[ wfdielen++ ] = 0; ++ // MAC Addr. ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ wfdie[ wfdielen++ ] = 0; ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len); ++ ++ return len; ++ ++} ++ ++#endif //CONFIG_WFD ++ ++u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 }; ++ u32 len=0, p2pielen = 0; ++#ifdef CONFIG_INTEL_WIDI ++ struct mlme_priv *pmlmepriv = &(pwdinfo->padapter->mlmepriv); ++ u8 zero_array_check[L2SDTA_SERVICE_VE_LEN] = { 0x00 }; ++ u8 widi_version = 0, i = 0; ++ ++ if( _rtw_memcmp( pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN ) == _FALSE ) ++ { ++ widi_version = 35; ++ } ++ else if( pmlmepriv->num_p2p_sdt != 0 ) ++ { ++ widi_version = 40; ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20100907 ++ // According to the P2P Specification, the probe response frame should contain 5 P2P attributes ++ // 1. P2P Capability ++ // 2. Extended Listen Timing ++ // 3. Notice of Absence ( NOA ) ( Only GO needs this ) ++ // 4. Device Info ++ // 5. Group Info ( Only GO need this ) ++ ++ // P2P Capability ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ RTW_PUT_LE16(p2pie + p2pielen, 0x0002); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ p2pie[ p2pielen ] = (P2P_GRPCAP_GO | P2P_GRPCAP_INTRABSS); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING)) ++ p2pie[ p2pielen ] |= P2P_GRPCAP_GROUP_FORMATION; ++ ++ p2pielen++; ++ } ++ else if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) ) ++ { ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT; ++ else ++ p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT; ++ ++ } ++ ++ // Extended Listen Timing ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 ); ++ RTW_PUT_LE16(p2pie + p2pielen, 0x0004); ++ p2pielen += 2; ++ ++ // Value: ++ // Availability Period ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ RTW_PUT_LE16(p2pie + p2pielen, 0xFFFF); ++ p2pielen += 2; ++ ++ // Availability Interval ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF ); ++ RTW_PUT_LE16(p2pie + p2pielen, 0xFFFF); ++ p2pielen += 2; ++ ++ ++ // Notice of Absence ATTR ++ // Type: ++ // Length: ++ // Value: ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ //go_add_noa_attr(pwdinfo); ++ } ++ ++ // Device Info ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++#ifdef CONFIG_INTEL_WIDI ++ if( widi_version == 35 ) ++ { ++ RTW_PUT_LE16(p2pie + p2pielen, 21 + 8 + pwdinfo->device_name_len); ++ } ++ else if( widi_version == 40 ) ++ { ++ RTW_PUT_LE16(p2pie + p2pielen, 21 + 8 * pmlmepriv->num_p2p_sdt + pwdinfo->device_name_len); ++ } ++ else ++#endif //CONFIG_INTEL_WIDI ++ RTW_PUT_LE16(p2pie + p2pielen, 21 + pwdinfo->device_name_len); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm ); ++ RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->supported_wps_cm); ++ p2pielen += 2; ++ ++#ifdef CONFIG_INTEL_WIDI ++ if( widi_version == 40 ) ++ { ++ // Primary Device Type ++ // Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_pdt_cid ); ++ p2pielen += 2; ++ ++ // OUI ++ //*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ RTW_PUT_BE32(p2pie + p2pielen, WPSOUI); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_pdt_scid); ++ p2pielen += 2; ++ } ++ else ++#endif //CONFIG_INTEL_WIDI ++ { ++ // Primary Device Type ++ // Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_MULIT_MEDIA); ++ p2pielen += 2; ++ ++ // OUI ++ //*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ RTW_PUT_BE32(p2pie + p2pielen, WPSOUI); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_SCID_MEDIA_SERVER); ++ p2pielen += 2; ++ } ++ ++ // Number of Secondary Device Types ++#ifdef CONFIG_INTEL_WIDI ++ if( widi_version == 35 ) ++ { ++ p2pie[ p2pielen++ ] = 0x01; ++ ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_DISPLAYS); ++ p2pielen += 2; ++ ++ RTW_PUT_BE32(p2pie + p2pielen, INTEL_DEV_TYPE_OUI); ++ p2pielen += 4; ++ ++ RTW_PUT_BE16(p2pie + p2pielen, P2P_SCID_WIDI_CONSUMER_SINK); ++ p2pielen += 2; ++ } ++ else if( widi_version == 40 ) ++ { ++ p2pie[ p2pielen++ ] = pmlmepriv->num_p2p_sdt; ++ for( ; i < pmlmepriv->num_p2p_sdt; i++ ) ++ { ++ RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_sdt_cid[i]); ++ p2pielen += 2; ++ ++ RTW_PUT_BE32(p2pie + p2pielen, INTEL_DEV_TYPE_OUI); ++ p2pielen += 4; ++ ++ RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_sdt_scid[i]); ++ p2pielen += 2; ++ } ++ } ++ else ++#endif //CONFIG_INTEL_WIDI ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_ATTR_DEVICE_NAME); ++ p2pielen += 2; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->device_name_len); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ // Group Info ATTR ++ // Type: ++ // Length: ++ // Value: ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ p2pielen += go_add_group_info_attr(pwdinfo, p2pie + p2pielen); ++ } ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len); ++ ++ ++ return len; ++ ++} ++ ++u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8* pssid, u8 ussidlen, u8* pdev_raddr ) ++{ ++ u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 }; ++ u32 len=0, p2pielen = 0; ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20110301 ++ // According to the P2P Specification, the provision discovery request frame should contain 3 P2P attributes ++ // 1. P2P Capability ++ // 2. Device Info ++ // 3. Group ID ( When joining an operating P2P Group ) ++ ++ // P2P Capability ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ RTW_PUT_LE16(p2pie + p2pielen, 0x0002); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT; ++ ++ // Group Capability Bitmap, 1 byte ++ if ( pwdinfo->persistent_supported ) ++ p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT; ++ else ++ p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT; ++ ++ ++ // Device Info ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ RTW_PUT_LE16(p2pie + p2pielen, 21 + pwdinfo->device_name_len); ++ p2pielen += 2; ++ ++ // Value: ++ // P2P Device Address ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ // Config Method ++ // This field should be big endian. Noted by P2P specification. ++ if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PBC ) ++ { ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_PBC ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_CONFIG_METHOD_PBC); ++ } ++ else ++ { ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_CONFIG_METHOD_DISPLAY); ++ } ++ ++ p2pielen += 2; ++ ++ // Primary Device Type ++ // Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_MULIT_MEDIA); ++ p2pielen += 2; ++ ++ // OUI ++ //*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI ); ++ RTW_PUT_BE32(p2pie + p2pielen, WPSOUI); ++ p2pielen += 4; ++ ++ // Sub Category ID ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_SCID_MEDIA_SERVER); ++ p2pielen += 2; ++ ++ // Number of Secondary Device Types ++ p2pie[ p2pielen++ ] = 0x00; // No Secondary Device Type List ++ ++ // Device Name ++ // Type: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME ); ++ RTW_PUT_BE16(p2pie + p2pielen, WPS_ATTR_DEVICE_NAME); ++ p2pielen += 2; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len ); ++ RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->device_name_len); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len ); ++ p2pielen += pwdinfo->device_name_len; ++ ++ if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) ) ++ { ++ // Added by Albert 2011/05/19 ++ // In this case, the pdev_raddr is the device address of the group owner. ++ ++ // P2P Group ID ATTR ++ // Type: ++ p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + ussidlen ); ++ RTW_PUT_LE16(p2pie + p2pielen, ETH_ALEN + ussidlen); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy( p2pie + p2pielen, pdev_raddr, ETH_ALEN ); ++ p2pielen += ETH_ALEN; ++ ++ _rtw_memcpy( p2pie + p2pielen, pssid, ussidlen ); ++ p2pielen += ussidlen; ++ ++ } ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len); ++ ++ ++ return len; ++ ++} ++ ++ ++u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 status_code) ++{ ++ u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 }; ++ u32 len=0, p2pielen = 0; ++ ++ // P2P OUI ++ p2pielen = 0; ++ p2pie[ p2pielen++ ] = 0x50; ++ p2pie[ p2pielen++ ] = 0x6F; ++ p2pie[ p2pielen++ ] = 0x9A; ++ p2pie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // According to the P2P Specification, the Association response frame should contain 2 P2P attributes ++ // 1. Status ++ // 2. Extended Listen Timing (optional) ++ ++ ++ // Status ATTR ++ p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status_code); ++ ++ ++ // Extended Listen Timing ATTR ++ // Type: ++ // Length: ++ // Value: ++ ++ ++ pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len); ++ ++ return len; ++ ++} ++ ++u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf) ++{ ++ u32 len=0; ++ ++ return len; ++} ++ ++u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len) ++{ ++ u8 *p; ++ u32 ret=_FALSE; ++ u8 *p2pie; ++ u32 p2pielen = 0; ++ int ssid_len=0, rate_cnt = 0; ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SUPPORTEDRATES_IE_, (int *)&rate_cnt, ++ len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_); ++ ++ if ( rate_cnt <= 4 ) ++ { ++ int i, g_rate =0; ++ ++ for( i = 0; i < rate_cnt; i++ ) ++ { ++ if ( ( ( *( p + 2 + i ) & 0xff ) != 0x02 ) && ++ ( ( *( p + 2 + i ) & 0xff ) != 0x04 ) && ++ ( ( *( p + 2 + i ) & 0xff ) != 0x0B ) && ++ ( ( *( p + 2 + i ) & 0xff ) != 0x16 ) ) ++ { ++ g_rate = 1; ++ } ++ } ++ ++ if ( g_rate == 0 ) ++ { ++ // There is no OFDM rate included in SupportedRates IE of this probe request frame ++ // The driver should response this probe request. ++ return ret; ++ } ++ } ++ else ++ { ++ // rate_cnt > 4 means the SupportRates IE contains the OFDM rate because the count of CCK rates are 4. ++ // We should proceed the following check for this probe request. ++ } ++ ++ // Added comments by Albert 20100906 ++ // There are several items we should check here. ++ // 1. This probe request frame must contain the P2P IE. (Done) ++ // 2. This probe request frame must contain the wildcard SSID. (Done) ++ // 3. Wildcard BSSID. (Todo) ++ // 4. Destination Address. ( Done in mgt_dispatcher function ) ++ // 5. Requested Device Type in WSC IE. (Todo) ++ // 6. Device ID attribute in P2P IE. (Todo) ++ ++ p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SSID_IE_, (int *)&ssid_len, ++ len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_); ++ ++ ssid_len &= 0xff; // Just last 1 byte is valid for ssid len of the probe request ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ if((p2pie=rtw_get_p2p_ie( pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_ , len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_ , NULL, &p2pielen))) ++ { ++ if ( (p != NULL) && _rtw_memcmp( ( void * ) ( p+2 ), ( void * ) pwdinfo->p2p_wildcard_ssid , 7 )) ++ { ++ //todo: ++ //Check Requested Device Type attributes in WSC IE. ++ //Check Device ID attribute in P2P IE ++ ++ ret = _TRUE; ++ } ++ else if ( (p != NULL) && ( ssid_len == 0 ) ) ++ { ++ ret = _TRUE; ++ } ++ } ++ else ++ { ++ //non -p2p device ++ } ++ ++ } ++ ++ ++ return ret; ++ ++} ++ ++u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len, struct sta_info *psta) ++{ ++ u8 status_code = P2P_STATUS_SUCCESS; ++ u8 *pbuf, *pattr_content=NULL; ++ u32 attr_contentlen = 0; ++ u16 cap_attr=0; ++ unsigned short frame_type, ie_offset=0; ++ u8 * ies; ++ u32 ies_len; ++ u8 * p2p_ie; ++ u32 p2p_ielen = 0; ++ ++ if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ return P2P_STATUS_FAIL_REQUEST_UNABLE; ++ ++ frame_type = GetFrameSubType(pframe); ++ if (frame_type == WIFI_ASSOCREQ) ++ { ++ ie_offset = _ASOCREQ_IE_OFFSET_; ++ } ++ else // WIFI_REASSOCREQ ++ { ++ ie_offset = _REASOCREQ_IE_OFFSET_; ++ } ++ ++ ies = pframe + WLAN_HDR_A3_LEN + ie_offset; ++ ies_len = len - WLAN_HDR_A3_LEN - ie_offset; ++ ++ p2p_ie = rtw_get_p2p_ie(ies , ies_len , NULL, &p2p_ielen); ++ ++ if ( !p2p_ie ) ++ { ++ DBG_8192C( "[%s] P2P IE not Found!!\n", __FUNCTION__ ); ++ status_code = P2P_STATUS_FAIL_INVALID_PARAM; ++ } ++ else ++ { ++ DBG_8192C( "[%s] P2P IE Found!!\n", __FUNCTION__ ); ++ } ++ ++ while ( p2p_ie ) ++ { ++ //Check P2P Capability ATTR ++ if( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*) &attr_contentlen) ) ++ { ++ DBG_8192C( "[%s] Got P2P Capability Attr!!\n", __FUNCTION__ ); ++ cap_attr = le16_to_cpu(cap_attr); ++ psta->dev_cap = cap_attr&0xff; ++ } ++ ++ //Check Extended Listen Timing ATTR ++ ++ ++ //Check P2P Device Info ATTR ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO, NULL, (uint*)&attr_contentlen)) ++ { ++ DBG_8192C( "[%s] Got P2P DEVICE INFO Attr!!\n", __FUNCTION__ ); ++ pattr_content = pbuf = rtw_zmalloc(attr_contentlen); ++ if(pattr_content) ++ { ++ u8 num_of_secdev_type; ++ u16 dev_name_len; ++ ++ ++ rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO , pattr_content, (uint*)&attr_contentlen); ++ ++ _rtw_memcpy(psta->dev_addr, pattr_content, ETH_ALEN);//P2P Device Address ++ ++ pattr_content += ETH_ALEN; ++ ++ _rtw_memcpy(&psta->config_methods, pattr_content, 2);//Config Methods ++ psta->config_methods = be16_to_cpu(psta->config_methods); ++ ++ pattr_content += 2; ++ ++ _rtw_memcpy(psta->primary_dev_type, pattr_content, 8); ++ ++ pattr_content += 8; ++ ++ num_of_secdev_type = *pattr_content; ++ pattr_content += 1; ++ ++ if(num_of_secdev_type==0) ++ { ++ psta->num_of_secdev_type = 0; ++ } ++ else ++ { ++ u32 len; ++ ++ psta->num_of_secdev_type = num_of_secdev_type; ++ ++ len = (sizeof(psta->secdev_types_list)<(num_of_secdev_type*8)) ? (sizeof(psta->secdev_types_list)) : (num_of_secdev_type*8); ++ ++ _rtw_memcpy(psta->secdev_types_list, pattr_content, len); ++ ++ pattr_content += (num_of_secdev_type*8); ++ } ++ ++ ++ //dev_name_len = attr_contentlen - ETH_ALEN - 2 - 8 - 1 - (num_of_secdev_type*8); ++ psta->dev_name_len=0; ++ if(WPS_ATTR_DEVICE_NAME == be16_to_cpu(*(u16*)pattr_content)) ++ { ++ dev_name_len = be16_to_cpu(*(u16*)(pattr_content+2)); ++ ++ psta->dev_name_len = (sizeof(psta->dev_name)dev_name):dev_name_len; ++ ++ _rtw_memcpy(psta->dev_name, pattr_content+4, psta->dev_name_len); ++ } ++ ++ rtw_mfree(pbuf, attr_contentlen); ++ ++ } ++ ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ ++ } ++ ++ return status_code; ++ ++} ++ ++u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len) ++{ ++ u8 *frame_body; ++ u8 status, dialogToken; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = pwdinfo->padapter; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *p2p_ie; ++ u32 p2p_ielen = 0; ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ dialogToken = frame_body[7]; ++ status = P2P_STATUS_FAIL_UNKNOWN_P2PGROUP; ++ ++ if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) ) ++ { ++ u8 groupid[ 38 ] = { 0x00 }; ++ u8 dev_addr[ETH_ALEN] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen)) ++ { ++ if(_rtw_memcmp(pwdinfo->device_addr, groupid, ETH_ALEN) && ++ _rtw_memcmp(pwdinfo->p2p_group_ssid, groupid+ETH_ALEN, pwdinfo->p2p_group_ssid_len)) ++ { ++ attr_contentlen=0; ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_ID, dev_addr, &attr_contentlen)) ++ { ++ _irqL irqL; ++ _list *phead, *plist; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //look up sta asoc_queue ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ ++ plist = get_next(plist); ++ ++ if(psta->is_p2p_device && (psta->dev_cap&P2P_DEVCAP_CLIENT_DISCOVERABILITY) && ++ _rtw_memcmp(psta->dev_addr, dev_addr, ETH_ALEN)) ++ { ++ ++ //_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ //issue GO Discoverability Request ++ issue_group_disc_req(pwdinfo, psta->hwaddr); ++ //_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ status = P2P_STATUS_SUCCESS; ++ ++ break; ++ } ++ else ++ { ++ status = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ } ++ ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ } ++ else ++ { ++ status = P2P_STATUS_FAIL_INVALID_PARAM; ++ } ++ ++ } ++ else ++ { ++ status = P2P_STATUS_FAIL_INVALID_PARAM; ++ } ++ ++ } ++ ++ } ++ ++ ++ //issue Device Discoverability Response ++ issue_p2p_devdisc_resp(pwdinfo, GetAddr2Ptr(pframe), status, dialogToken); ++ ++ ++ return (status==P2P_STATUS_SUCCESS) ? _TRUE:_FALSE; ++ ++} ++ ++u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe, uint len) ++{ ++ return _TRUE; ++} ++ ++u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len ) ++{ ++ u8 *frame_body; ++ u8 *wpsie; ++ uint wps_ielen = 0, attr_contentlen = 0; ++ u16 uconfig_method = 0; ++ ++ ++ frame_body = (pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ if ( (wpsie=rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &wps_ielen)) ) ++ { ++ if ( rtw_get_wps_attr_content( wpsie, wps_ielen, WPS_ATTR_CONF_METHOD , ( u8* ) &uconfig_method, &attr_contentlen) ) ++ { ++ uconfig_method = be16_to_cpu( uconfig_method ); ++ switch( uconfig_method ) ++ { ++ case WPS_CM_DISPLYA: ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 ); ++ break; ++ } ++ case WPS_CM_LABEL: ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "lab", 3 ); ++ break; ++ } ++ case WPS_CM_PUSH_BUTTON: ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 ); ++ break; ++ } ++ case WPS_CM_KEYPAD: ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 ); ++ break; ++ } ++ } ++ issue_p2p_provision_resp( pwdinfo, GetAddr2Ptr(pframe), frame_body, uconfig_method); ++ } ++ } ++ DBG_871X( "[%s] config method = %s\n", __FUNCTION__, pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req ); ++ return _TRUE; ++ ++} ++ ++u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe) ++{ ++ ++ return _TRUE; ++} ++ ++u8 rtw_p2p_get_peer_ch_list(struct wifidirect_info *pwdinfo, u8 *ch_content, u8 ch_cnt, u8 *peer_ch_list) ++{ ++ u8 i = 0, j = 0; ++ u8 temp = 0; ++ u8 ch_no = 0; ++ ch_content += 3; ++ ch_cnt -= 3; ++ ++ while( ch_cnt > 0) ++ { ++ ch_content += 1; ++ ch_cnt -= 1; ++ temp = *ch_content; ++ for( i = 0 ; i < temp ; i++, j++ ) ++ { ++ peer_ch_list[j] = *( ch_content + 1 + i ); ++ } ++ ch_content += (temp + 1); ++ ch_cnt -= (temp + 1); ++ ch_no += temp ; ++ } ++ ++ return ch_no; ++} ++ ++u8 rtw_p2p_check_peer_oper_ch(struct mlme_ext_priv *pmlmeext, u8 ch) ++{ ++ u8 i = 0; ++ ++ for( i = 0; i < pmlmeext->max_chan_nums; i++ ) ++ { ++ if ( pmlmeext->channel_set[ i ].ChannelNum == ch ) ++ { ++ return _SUCCESS; ++ } ++ } ++ ++ return _FAIL; ++} ++ ++u8 rtw_p2p_ch_inclusion(struct mlme_ext_priv *pmlmeext, u8 *peer_ch_list, u8 peer_ch_num, u8 *ch_list_inclusioned) ++{ ++ int i = 0, j = 0, temp = 0; ++ u8 ch_no = 0; ++ ++ for( i = 0; i < peer_ch_num; i++ ) ++ { ++ for( j = temp; j < pmlmeext->max_chan_nums; j++ ) ++ { ++ if( *( peer_ch_list + i ) == pmlmeext->channel_set[ j ].ChannelNum ) ++ { ++ ch_list_inclusioned[ ch_no++ ] = *( peer_ch_list + i ); ++ temp = j; ++ break; ++ } ++ } ++ } ++ ++ return ch_no; ++} ++ ++u8 process_p2p_group_negotation_req( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ) ++{ ++ _adapter *padapter = pwdinfo->padapter; ++ u8 result = P2P_STATUS_SUCCESS; ++ u32 p2p_ielen = 0, wps_ielen = 0; ++ u8 * ies; ++ u32 ies_len; ++ u8 *p2p_ie; ++ u8 *wpsie; ++ u16 wps_devicepassword_id = 0x0000; ++ uint wps_devicepassword_id_len = 0; ++#ifdef CONFIG_WFD ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ u32 wfd_ielen = 0; ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++#endif // CONFIG_TDLS ++#endif // CONFIG_WFD ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = pwdinfo->padapter->pbuddy_adapter; ++ struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif ++ ++ if ( (wpsie=rtw_get_wps_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &wps_ielen)) ) ++ { ++ // Commented by Kurt 20120113 ++ // If some device wants to do p2p handshake without sending prov_disc_req ++ // We have to get peer_req_cm from here. ++ if(_rtw_memcmp( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "000", 3) ) ++ { ++ rtw_get_wps_attr_content( wpsie, wps_ielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len); ++ wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id ); ++ ++ if ( wps_devicepassword_id == WPS_DPID_USER_SPEC ) ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 ); ++ } ++ else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC ) ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 ); ++ } ++ else ++ { ++ _rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 ); ++ } ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] WPS IE not Found!!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ return( result ); ++ } ++ ++ if ( pwdinfo->ui_got_wps_info == P2P_NO_WPSINFO ) ++ { ++ result = P2P_STATUS_FAIL_INFO_UNAVAILABLE; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_INFOR_NOREADY); ++ return( result ); ++ } ++ ++ ies = pframe + _PUBLIC_ACTION_IE_OFFSET_; ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ if ( !p2p_ie ) ++ { ++ DBG_871X( "[%s] P2P IE not Found!!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ } ++ ++ while ( p2p_ie ) ++ { ++ u8 attr_content = 0x00; ++ u32 attr_contentlen = 0; ++ u8 ch_content[100] = { 0x00 }; ++ uint ch_cnt = 0; ++ u8 peer_ch_list[100] = { 0x00 }; ++ u8 peer_ch_num = 0; ++ u8 ch_list_inclusioned[100] = { 0x00 }; ++ u8 ch_num_inclusioned = 0; ++ u16 cap_attr; ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_ING); ++ ++ //Check P2P Capability ATTR ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*)&attr_contentlen) ) ++ { ++ cap_attr = le16_to_cpu(cap_attr); ++ ++#if defined(CONFIG_WFD) && defined(CONFIG_TDLS) ++ if(!(cap_attr & P2P_GRPCAP_INTRABSS) ) ++ ptdlsinfo->ap_prohibited = _TRUE; ++#endif //defined(CONFIG_WFD) && defined(CONFIG_TDLS) ++ } ++ ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT , &attr_content, &attr_contentlen) ) ++ { ++ DBG_871X( "[%s] GO Intent = %d, tie = %d\n", __FUNCTION__, attr_content >> 1, attr_content & 0x01 ); ++ pwdinfo->peer_intent = attr_content; // include both intent and tie breaker values. ++ ++ if ( pwdinfo->intent == ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ // Try to match the tie breaker value ++ if ( pwdinfo->intent == P2P_MAX_INTENT ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ result = P2P_STATUS_FAIL_BOTH_GOINTENT_15; ++ } ++ else ++ { ++ if ( attr_content & 0x01 ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ } ++ } ++ else if ( pwdinfo->intent > ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ // Store the group id information. ++ _rtw_memcpy( pwdinfo->groupid_info.go_device_addr, pwdinfo->device_addr, ETH_ALEN ); ++ _rtw_memcpy( pwdinfo->groupid_info.ssid, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen ); ++ } ++ } ++ ++ ++ attr_contentlen = 0; ++ if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_INTENTED_IF_ADDR, pwdinfo->p2p_peer_interface_addr, &attr_contentlen ) ) ++ { ++ if ( attr_contentlen != ETH_ALEN ) ++ { ++ _rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN ); ++ } ++ } ++ ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, ch_content, &ch_cnt) ) ++ { ++ peer_ch_num = rtw_p2p_get_peer_ch_list(pwdinfo, ch_content, ch_cnt, peer_ch_list); ++ ch_num_inclusioned = rtw_p2p_ch_inclusion(&padapter->mlmeextpriv, peer_ch_list, peer_ch_num, ch_list_inclusioned); ++ ++ if( ch_num_inclusioned == 0) ++ { ++ DBG_871X( "[%s] No common channel in channel list!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_NO_COMMON_CH; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ break; ++ } ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ if ( !rtw_p2p_is_channel_list_ok( pwdinfo->operating_channel, ++ ch_list_inclusioned, ch_num_inclusioned) ) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ DBG_871X( "[%s] desired channel NOT Found!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_NO_COMMON_CH; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ break; ++ } ++ else ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ u8 operatingch_info[5] = { 0x00 }, peer_operating_ch = 0; ++ attr_contentlen = 0; ++ ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) ) ++ { ++ peer_operating_ch = operatingch_info[4]; ++ } ++ ++ if ( rtw_p2p_is_channel_list_ok( peer_operating_ch, ++ ch_list_inclusioned, ch_num_inclusioned) ) ++ { ++ /** ++ * Change our operating channel as peer's for compatibility. ++ */ ++ pwdinfo->operating_channel = peer_operating_ch; ++ DBG_871X( "[%s] Change op ch to %02x as peer's\n", __FUNCTION__, pwdinfo->operating_channel); ++ } ++ else ++ { ++ // Take first channel of ch_list_inclusioned as operating channel ++ pwdinfo->operating_channel = ch_list_inclusioned[0]; ++ DBG_871X( "[%s] Change op ch to %02x\n", __FUNCTION__, pwdinfo->operating_channel); ++ } ++ } ++ ++ } ++ } ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ } ++ ++#ifdef CONFIG_WFD ++ // Added by Albert 20110823 ++ // Try to get the TCP port information when receiving the negotiation request. ++ if ( rtw_get_wfd_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 attr_content[ 10 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ DBG_871X( "[%s] WFD IE Found!!\n", __FUNCTION__ ); ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 ); ++ DBG_871X( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ } ++ } ++#endif // CONFIG_WFD ++ ++ return( result ); ++} ++ ++u8 process_p2p_group_negotation_resp( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ) ++{ ++ _adapter *padapter = pwdinfo->padapter; ++ u8 result = P2P_STATUS_SUCCESS; ++ u32 p2p_ielen, wps_ielen; ++ u8 * ies; ++ u32 ies_len; ++ u8 * p2p_ie; ++#ifdef CONFIG_WFD ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ u32 wfd_ielen = 0; ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++#endif // CONFIG_TDLS ++#endif // CONFIG_WFD ++ ++ ies = pframe + _PUBLIC_ACTION_IE_OFFSET_; ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ // Be able to know which one is the P2P GO and which one is P2P client. ++ ++ if ( rtw_get_wps_ie( ies, ies_len, NULL, &wps_ielen) ) ++ { ++ ++ } ++ else ++ { ++ DBG_871X( "[%s] WPS IE not Found!!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ } ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ if ( !p2p_ie ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM; ++ } ++ else ++ { ++ ++ u8 attr_content = 0x00; ++ u32 attr_contentlen = 0; ++ u8 operatingch_info[5] = { 0x00 }; ++ uint ch_cnt = 0; ++ u8 ch_content[100] = { 0x00 }; ++ u8 groupid[ 38 ]; ++ u16 cap_attr; ++ u8 peer_ch_list[100] = { 0x00 }; ++ u8 peer_ch_num = 0; ++ u8 ch_list_inclusioned[100] = { 0x00 }; ++ u8 ch_num_inclusioned = 0; ++ ++ while ( p2p_ie ) // Found the P2P IE. ++ { ++ ++ //Check P2P Capability ATTR ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*)&attr_contentlen) ) ++ { ++ cap_attr = le16_to_cpu(cap_attr); ++#if defined(CONFIG_WFD) && defined(CONFIG_TDLS) ++ if(!(cap_attr & P2P_GRPCAP_INTRABSS) ) ++ ptdlsinfo->ap_prohibited = _TRUE; ++#endif //defined(CONFIG_WFD) && defined(CONFIG_TDLS) ++ } ++ ++ rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen); ++ if ( attr_contentlen == 1 ) ++ { ++ DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content ); ++ if ( attr_content == P2P_STATUS_SUCCESS ) ++ { ++ // Do nothing. ++ } ++ else ++ { ++ if ( P2P_STATUS_FAIL_INFO_UNAVAILABLE == attr_content ) { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INFOR_NOREADY); ++ } else { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ } ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ result = attr_content; ++ break; ++ } ++ } ++ ++ // Try to get the peer's interface address ++ attr_contentlen = 0; ++ if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_INTENTED_IF_ADDR, pwdinfo->p2p_peer_interface_addr, &attr_contentlen ) ) ++ { ++ if ( attr_contentlen != ETH_ALEN ) ++ { ++ _rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN ); ++ } ++ } ++ ++ // Try to get the peer's intent and tie breaker value. ++ attr_content = 0x00; ++ attr_contentlen = 0; ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT , &attr_content, &attr_contentlen) ) ++ { ++ DBG_871X( "[%s] GO Intent = %d, tie = %d\n", __FUNCTION__, attr_content >> 1, attr_content & 0x01 ); ++ pwdinfo->peer_intent = attr_content; // include both intent and tie breaker values. ++ ++ if ( pwdinfo->intent == ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ // Try to match the tie breaker value ++ if ( pwdinfo->intent == P2P_MAX_INTENT ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ result = P2P_STATUS_FAIL_BOTH_GOINTENT_15; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ } ++ else ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ if ( attr_content & 0x01 ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ } ++ } ++ else if ( pwdinfo->intent > ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ else ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ // Store the group id information. ++ _rtw_memcpy( pwdinfo->groupid_info.go_device_addr, pwdinfo->device_addr, ETH_ALEN ); ++ _rtw_memcpy( pwdinfo->groupid_info.ssid, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen ); ++ ++ } ++ } ++ ++ // Try to get the operation channel information ++ ++ attr_contentlen = 0; ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen)) ++ { ++ DBG_871X( "[%s] Peer's operating channel = %d\n", __FUNCTION__, operatingch_info[4] ); ++ pwdinfo->peer_operating_ch = operatingch_info[4]; ++ } ++ ++ // Try to get the channel list information ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, pwdinfo->channel_list_attr, &pwdinfo->channel_list_attr_len ) ) ++ { ++ DBG_871X( "[%s] channel list attribute found, len = %d\n", __FUNCTION__, pwdinfo->channel_list_attr_len ); ++ ++ peer_ch_num = rtw_p2p_get_peer_ch_list(pwdinfo, pwdinfo->channel_list_attr, pwdinfo->channel_list_attr_len, peer_ch_list); ++ ch_num_inclusioned = rtw_p2p_ch_inclusion(&padapter->mlmeextpriv, peer_ch_list, peer_ch_num, ch_list_inclusioned); ++ ++ if( ch_num_inclusioned == 0) ++ { ++ DBG_871X( "[%s] No common channel in channel list!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_NO_COMMON_CH; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ break; ++ } ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ if ( !rtw_p2p_is_channel_list_ok( pwdinfo->operating_channel, ++ ch_list_inclusioned, ch_num_inclusioned) ) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ DBG_871X( "[%s] desired channel NOT Found!\n", __FUNCTION__ ); ++ result = P2P_STATUS_FAIL_NO_COMMON_CH; ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ break; ++ } ++ else ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ u8 operatingch_info[5] = { 0x00 }, peer_operating_ch = 0; ++ attr_contentlen = 0; ++ ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) ) ++ { ++ peer_operating_ch = operatingch_info[4]; ++ } ++ ++ if ( rtw_p2p_is_channel_list_ok( peer_operating_ch, ++ ch_list_inclusioned, ch_num_inclusioned) ) ++ { ++ /** ++ * Change our operating channel as peer's for compatibility. ++ */ ++ pwdinfo->operating_channel = peer_operating_ch; ++ DBG_871X( "[%s] Change op ch to %02x as peer's\n", __FUNCTION__, pwdinfo->operating_channel); ++ } ++ else ++ { ++ // Take first channel of ch_list_inclusioned as operating channel ++ pwdinfo->operating_channel = ch_list_inclusioned[0]; ++ DBG_871X( "[%s] Change op ch to %02x\n", __FUNCTION__, pwdinfo->operating_channel); ++ } ++ } ++ ++ } ++ } ++ ++ } ++ else ++ { ++ DBG_871X( "[%s] channel list attribute not found!\n", __FUNCTION__); ++ } ++ ++ // Try to get the group id information if peer is GO ++ attr_contentlen = 0; ++ _rtw_memset( groupid, 0x00, 38 ); ++ if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen) ) ++ { ++ _rtw_memcpy( pwdinfo->groupid_info.go_device_addr, &groupid[0], ETH_ALEN ); ++ _rtw_memcpy( pwdinfo->groupid_info.ssid, &groupid[6], attr_contentlen - ETH_ALEN ); ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ } ++ ++ } ++ ++#ifdef CONFIG_WFD ++ // Added by Albert 20111122 ++ // Try to get the TCP port information when receiving the negotiation response. ++ if ( rtw_get_wfd_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 attr_content[ 10 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ DBG_8192C( "[%s] WFD IE Found!!\n", __FUNCTION__ ); ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 ); ++ DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ } ++ } ++#endif // CONFIG_WFD ++ ++ return( result ); ++ ++} ++ ++u8 process_p2p_group_negotation_confirm( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ) ++{ ++ u8 * ies; ++ u32 ies_len; ++ u8 * p2p_ie; ++ u32 p2p_ielen = 0; ++ u8 result = P2P_STATUS_SUCCESS; ++ ies = pframe + _PUBLIC_ACTION_IE_OFFSET_; ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ while ( p2p_ie ) // Found the P2P IE. ++ { ++ u8 attr_content = 0x00, operatingch_info[5] = { 0x00 }; ++ u8 groupid[ 38 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ pwdinfo->negotiation_dialog_token = 1; ++ rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen); ++ if ( attr_contentlen == 1 ) ++ { ++ DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content ); ++ result = attr_content; ++ ++ if ( attr_content == P2P_STATUS_SUCCESS ) ++ { ++ u8 bcancelled = 0; ++ ++ _cancel_timer( &pwdinfo->restore_p2p_state_timer, &bcancelled ); ++ ++ // Commented by Albert 20100911 ++ // Todo: Need to handle the case which both Intents are the same. ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ if ( ( pwdinfo->intent ) > ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ else if ( ( pwdinfo->intent ) < ( pwdinfo->peer_intent >> 1 ) ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ else ++ { ++ // Have to compare the Tie Breaker ++ if ( pwdinfo->peer_intent & 0x01 ) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(pwdinfo->padapter , _FW_LINKED ) ) ++ { ++ // Switch back to the AP channel soon. ++ _set_timer( &pwdinfo->ap_p2p_switch_timer, 100 ); ++ } ++#endif ++ } ++ else ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL); ++ break; ++ } ++ } ++ ++ // Try to get the group id information ++ attr_contentlen = 0; ++ _rtw_memset( groupid, 0x00, 38 ); ++ if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen) ) ++ { ++ DBG_871X( "[%s] Ssid = %s, ssidlen = %d\n", __FUNCTION__, &groupid[ETH_ALEN], (u32)strlen(&groupid[ETH_ALEN]) ); ++ _rtw_memcpy( pwdinfo->groupid_info.go_device_addr, &groupid[0], ETH_ALEN ); ++ _rtw_memcpy( pwdinfo->groupid_info.ssid, &groupid[6], attr_contentlen - ETH_ALEN ); ++ } ++ ++ attr_contentlen = 0; ++ if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) ) ++ { ++ DBG_871X( "[%s] Peer's operating channel = %d\n", __FUNCTION__, operatingch_info[4] ); ++ pwdinfo->peer_operating_ch = operatingch_info[4]; ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ ++ } ++ ++ return( result ); ++} ++ ++u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len) ++{ ++ u8 *frame_body; ++ u8 dialogToken=0; ++ u8 status = P2P_STATUS_SUCCESS; ++ ++ frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ ++ dialogToken = frame_body[6]; ++ ++ //todo: check NoA attribute ++ ++ issue_p2p_presence_resp(pwdinfo, GetAddr2Ptr(pframe), status, dialogToken); ++ ++ return _TRUE; ++} ++ ++void find_phase_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ NDIS_802_11_SSID ssid; ++ _irqL irqL; ++ u8 _status = 0; ++ ++_func_enter_; ++ ++ _rtw_memset((unsigned char*)&ssid, 0, sizeof(NDIS_802_11_SSID)); ++ _rtw_memcpy(ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN ); ++ ssid.SsidLength = P2P_WILDCARD_SSID_LEN; ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH); ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _status = rtw_sitesurvey_cmd(padapter, &ssid, 1, NULL, 0); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ ++_func_exit_; ++} ++ ++void p2p_concurrent_handler( _adapter* padapter ); ++ ++void restore_p2p_state_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++_func_enter_; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL)) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_RSP)) ++ { ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500); ++ } ++ } ++#endif ++ ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE)) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ p2p_concurrent_handler( padapter ); ++#else ++ // In the P2P client mode, the driver should not switch back to its listen channel ++ // because this P2P client should stay at the operating channel of P2P GO. ++ set_channel_bwmode( padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++#endif ++ } ++_func_exit_; ++} ++ ++void pre_tx_invitereq_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ u8 val8 = 1; ++_func_enter_; ++ ++ set_channel_bwmode(padapter, pwdinfo->invitereq_info.peer_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++_func_exit_; ++} ++ ++void pre_tx_provdisc_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ u8 val8 = 1; ++_func_enter_; ++ ++ set_channel_bwmode(padapter, pwdinfo->tx_prov_disc_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++_func_exit_; ++} ++ ++void pre_tx_negoreq_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ u8 val8 = 1; ++_func_enter_; ++ ++ set_channel_bwmode(padapter, pwdinfo->nego_req_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++_func_exit_; ++} ++ ++#ifdef CONFIG_CONCURRENT_MODE ++void p2p_concurrent_handler( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ //_adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ //struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ //struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ //struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ u8 val8; ++_func_enter_; ++ ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ pwdinfo->operating_channel = pbuddy_mlmeext->cur_channel; ++ ++ if( pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ DBG_871X("%s, switch ch back to buddy's cur_channel=%d\n", __func__, pbuddy_mlmeext->cur_channel); ++ ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500); ++ } ++ else if( pwdinfo->driver_interface == DRIVER_WEXT ) ++ { ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ { ++ // Now, the driver stays on the AP's channel. ++ // If the pwdinfo->ext_listen_period = 0, that means the P2P listen state is not available on listen channel. ++ if ( pwdinfo->ext_listen_period > 0 ) ++ { ++ DBG_8192C( "[%s] P2P_STATE_IDLE, ext_listen_period = %d\n", __FUNCTION__, pwdinfo->ext_listen_period ); ++ ++ if ( pbuddy_mlmeext->cur_channel != pwdinfo->listen_channel ) ++ { ++ // Will switch to listen channel so that need to send the NULL data with PW bit to AP. ++ issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500); ++ set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN); ++ val8 = 1; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ ++ // Todo: To check the value of pwdinfo->ext_listen_period is equal to 0 or not. ++ _set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_period ); ++ } ++ } ++ else if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN) || ++ rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL) || ++ ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) && pwdinfo->nego_req_info.benable == _FALSE ) || ++ rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ) ) ++ { ++ // Now, the driver is in the listen state of P2P mode. ++ DBG_8192C( "[%s] P2P_STATE_IDLE, ext_listen_interval = %d\n", __FUNCTION__, pwdinfo->ext_listen_interval ); ++ ++ // Commented by Albert 2012/11/01 ++ // If the AP's channel is the same as the listen channel, we should still be in the listen state ++ // Other P2P device is still able to find this device out even this device is in the AP's channel. ++ // So, configure this device to be able to receive the probe request frame and set it to listen state. ++ if ( pbuddy_mlmeext->cur_channel != pwdinfo->listen_channel ) ++ { ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ val8 = 0; ++ padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_IDLE); ++ issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500); ++ } ++ ++ // Todo: To check the value of pwdinfo->ext_listen_interval is equal to 0 or not. ++ _set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_interval ); ++ } ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_OK)) ++ { ++ // The driver had finished the P2P handshake successfully. ++ val8 = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500); ++ } ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) ++ { ++ val8 = 1; ++ set_channel_bwmode(padapter, pwdinfo->tx_prov_disc_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ } ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) && pwdinfo->nego_req_info.benable == _TRUE) ++ { ++ val8 = 1; ++ set_channel_bwmode(padapter, pwdinfo->nego_req_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ } ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) && pwdinfo->invitereq_info.benable == _TRUE) ++ { ++ /* ++ val8 = 1; ++ set_channel_bwmode(padapter, , HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8)); ++ issue_probereq_p2p(padapter, NULL); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ */ ++ } ++ } ++ } ++ else ++ { ++ set_channel_bwmode( padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ ++_func_exit_; ++} ++#endif ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++static void ro_ch_handler(_adapter *padapter) ++{ ++ struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo; ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ u8 ch, bw, offset; ++_func_enter_; ++ ++ if (rtw_get_ch_setting_union(padapter, &ch, &bw, &offset) != 0) { ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" back to linked union - ch:%u, bw:%u, offset:%u\n", ++ FUNC_ADPT_ARG(padapter), ch, bw, offset); ++ } ++ else if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->listen_channel) { ++ ch = pwdinfo->listen_channel; ++ bw = HT_CHANNEL_WIDTH_20; ++ offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" back to listen ch - ch:%u, bw:%u, offset:%u\n", ++ FUNC_ADPT_ARG(padapter), ch, bw, offset); ++ } ++ else { ++ ch = pcfg80211_wdinfo->restore_channel; ++ bw = HT_CHANNEL_WIDTH_20; ++ offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ if (0) ++ DBG_871X(FUNC_ADPT_FMT" back to restore ch - ch:%u, bw:%u, offset:%u\n", ++ FUNC_ADPT_ARG(padapter), ch, bw, offset); ++ } ++ ++ set_channel_bwmode(padapter, ch, offset, bw); ++ ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo)); ++#endif ++ ++ pcfg80211_wdinfo->is_ro_ch = _FALSE; ++ ++ DBG_871X("cfg80211_remain_on_channel_expired\n"); ++ ++ rtw_cfg80211_remain_on_channel_expired(padapter, ++ pcfg80211_wdinfo->remain_on_ch_cookie, ++ &pcfg80211_wdinfo->remain_on_ch_channel, ++ pcfg80211_wdinfo->remain_on_ch_type, GFP_KERNEL); ++ ++_func_exit_; ++} ++ ++static void ro_ch_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev); ++ ++ //printk("%s \n", __FUNCTION__); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ATOMIC_SET(&pwdev_priv->ro_ch_to, 1); ++#endif ++ ++ p2p_protocol_wk_cmd( adapter, P2P_RO_CH_WK); ++} ++ ++static void rtw_change_p2pie_op_ch(_adapter *padapter, const u8 *frame_body, u32 len, u8 ch) ++{ ++ u8 *ies, *p2p_ie; ++ u32 ies_len, p2p_ielen; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_); ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ while ( p2p_ie ) { ++ u32 attr_contentlen = 0; ++ u8 *pattr = NULL; ++ ++ //Check P2P_ATTR_OPERATING_CH ++ attr_contentlen = 0; ++ pattr = NULL; ++ if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL) ++ { ++ *(pattr+4) = ch; ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ } ++} ++ ++static void rtw_change_p2pie_ch_list(_adapter *padapter, const u8 *frame_body, u32 len, u8 ch) ++{ ++ u8 *ies, *p2p_ie; ++ u32 ies_len, p2p_ielen; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_); ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ while (p2p_ie) { ++ u32 attr_contentlen = 0; ++ u8 *pattr = NULL; ++ ++ //Check P2P_ATTR_CH_LIST ++ if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL) { ++ int i; ++ u32 num_of_ch; ++ u8 *pattr_temp = pattr + 3 ; ++ ++ attr_contentlen -= 3; ++ ++ while (attr_contentlen>0) { ++ num_of_ch = *(pattr_temp+1); ++ ++ for(i=0; ipbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ u8 buddy_ch = pbuddy_mlmeext->cur_channel; ++ ++ ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_); ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ while (p2p_ie) { ++ u32 attr_contentlen = 0; ++ u8 *pattr = NULL; ++ ++ //Check P2P_ATTR_CH_LIST ++ if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL) { ++ int i; ++ u32 num_of_ch; ++ u8 *pattr_temp = pattr + 3 ; ++ ++ attr_contentlen -= 3; ++ ++ while (attr_contentlen>0) { ++ num_of_ch = *(pattr_temp+1); ++ ++ for(i=0; ipbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ u8 buddy_ch = pbuddy_mlmeext->cur_channel; ++ ++ ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_); ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ while (p2p_ie) { ++ u32 attr_contentlen = 0; ++ u8 *pattr = NULL; ++ ++ //Check P2P_ATTR_OPERATING_CH ++ attr_contentlen = 0; ++ pattr = NULL; ++ if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL) { ++ if (*(pattr+4) == buddy_ch) { ++ DBG_871X(FUNC_ADPT_FMT" op_ch fit buddy_ch:%u\n", FUNC_ADPT_ARG(padapter), buddy_ch); ++ fit = _TRUE; ++ break; ++ } ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ } ++#endif ++ return fit; ++} ++ ++static void rtw_cfg80211_adjust_p2pie_channel(_adapter *padapter, const u8 *frame_body, u32 len) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ u8 *ies, *p2p_ie; ++ u32 ies_len, p2p_ielen; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_); ++ ies_len = len - _PUBLIC_ACTION_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen ); ++ ++ while ( p2p_ie ) ++ { ++ u32 attr_contentlen = 0; ++ u8 *pattr = NULL; ++ ++ //Check P2P_ATTR_CH_LIST ++ if((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL) ++ { ++ int i; ++ u32 num_of_ch; ++ u8 *pattr_temp = pattr + 3 ; ++ ++ attr_contentlen -= 3; ++ ++ while(attr_contentlen>0) ++ { ++ num_of_ch = *(pattr_temp+1); ++ ++ for(i=0; icur_channel;//forcing to the same channel ++ ++ pattr_temp += (2+num_of_ch); ++ attr_contentlen -= (2+num_of_ch); ++ } ++ } ++ ++ //Check P2P_ATTR_OPERATING_CH ++ attr_contentlen = 0; ++ pattr = NULL; ++ if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL) ++ { ++ *(pattr+4) = pbuddy_mlmeext->cur_channel;//forcing to the same channel ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ ++ } ++ ++#endif ++} ++ ++#ifdef CONFIG_WFD ++void rtw_append_wfd_ie(_adapter *padapter, u8 *buf, u32* len) ++{ ++ unsigned char *frame_body; ++ u8 category, action, OUI_Subtype, dialogToken=0; ++ u32 wfdielen = 0; ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ ++ frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ category = frame_body[0]; ++ ++ if(category == RTW_WLAN_CATEGORY_PUBLIC) ++ { ++ action = frame_body[1]; ++ if (action == ACT_PUBLIC_VENDOR ++ && _rtw_memcmp(frame_body+2, P2P_OUI, 4) == _TRUE ++ ) ++ { ++ OUI_Subtype = frame_body[6]; ++ dialogToken = frame_body[7]; ++ switch( OUI_Subtype )//OUI Subtype ++ { ++ case P2P_GO_NEGO_REQ: ++ { ++ wfdielen = build_nego_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_GO_NEGO_RESP: ++ { ++ wfdielen = build_nego_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_GO_NEGO_CONF: ++ { ++ wfdielen = build_nego_confirm_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_INVIT_REQ: ++ { ++ wfdielen = build_invitation_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_INVIT_RESP: ++ { ++ wfdielen = build_invitation_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_DEVDISC_REQ: ++ break; ++ case P2P_DEVDISC_RESP: ++ ++ break; ++ case P2P_PROVISION_DISC_REQ: ++ { ++ wfdielen = build_provdisc_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ case P2P_PROVISION_DISC_RESP: ++ { ++ wfdielen = build_provdisc_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) ); ++ (*len) += wfdielen; ++ break; ++ } ++ default: ++ ++ break; ++ } ++ ++ } ++ ++ } ++ else if(category == RTW_WLAN_CATEGORY_P2P) ++ { ++ OUI_Subtype = frame_body[5]; ++ dialogToken = frame_body[6]; ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("ACTION_CATEGORY_P2P: OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n", ++ cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ), OUI_Subtype, dialogToken); ++#endif ++ ++ switch(OUI_Subtype) ++ { ++ case P2P_NOTICE_OF_ABSENCE: ++ ++ break; ++ case P2P_PRESENCE_REQUEST: ++ ++ break; ++ case P2P_PRESENCE_RESPONSE: ++ ++ break; ++ case P2P_GO_DISC_REQUEST: ++ ++ break; ++ default: ++ ++ break; ++ } ++ ++ } ++ else ++ { ++ DBG_871X("%s, action frame category=%d\n", __func__, category); ++ //is_p2p_frame = (-1); ++ } ++ ++ return; ++} ++#endif ++ ++u8 *dump_p2p_attr_ch_list(u8 *p2p_ie, uint p2p_ielen, u8 *buf, u32 buf_len) ++{ ++ uint attr_contentlen = 0; ++ u8 *pattr = NULL; ++ int w_sz = 0; ++ u8 ch_cnt = 0; ++ u8 ch_list[40]; ++ bool continuous = _FALSE; ++ ++ if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, &attr_contentlen))!=NULL) { ++ int i, j; ++ u32 num_of_ch; ++ u8 *pattr_temp = pattr + 3 ; ++ ++ attr_contentlen -= 3; ++ ++ _rtw_memset(ch_list, 0, 40); ++ ++ while (attr_contentlen>0) { ++ num_of_ch = *(pattr_temp+1); ++ ++ for(i=0; i=ch_cnt) ++ ch_list[ch_cnt++] = *(pattr_temp+2+i); ++ ++ } ++ ++ pattr_temp += (2+num_of_ch); ++ attr_contentlen -= (2+num_of_ch); ++ } ++ ++ for (j=0;j>1 == resp >>1) ++ return req&0x01 ? _TRUE : _FALSE; ++ else if (req>>1 > resp>>1) ++ return _TRUE; ++ else ++ return _FALSE; ++} ++ ++int rtw_p2p_check_frames(_adapter *padapter, const u8 *buf, u32 len, u8 tx) ++{ ++ int is_p2p_frame = (-1); ++ unsigned char *frame_body; ++ u8 category, action, OUI_Subtype, dialogToken=0; ++ u8 *p2p_ie = NULL; ++ uint p2p_ielen = 0; ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ int status = -1; ++ u8 ch_list_buf[128] = {'\0'}; ++ int op_ch = -1; ++ int listen_ch = -1; ++ u8 intent = 0; ++ ++ frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ category = frame_body[0]; ++ //just for check ++ if(category == RTW_WLAN_CATEGORY_PUBLIC) ++ { ++ action = frame_body[1]; ++ if (action == ACT_PUBLIC_VENDOR ++ && _rtw_memcmp(frame_body+2, P2P_OUI, 4) == _TRUE ++ ) ++ { ++ OUI_Subtype = frame_body[6]; ++ dialogToken = frame_body[7]; ++ is_p2p_frame = OUI_Subtype; ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("ACTION_CATEGORY_PUBLIC: ACT_PUBLIC_VENDOR, OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n", ++ cpu_to_be32( *( ( u32* ) ( frame_body + 2 ) ) ), OUI_Subtype, dialogToken); ++ #endif ++ ++ p2p_ie = rtw_get_p2p_ie( ++ (u8 *)buf+sizeof(struct rtw_ieee80211_hdr_3addr)+_PUBLIC_ACTION_IE_OFFSET_, ++ len-sizeof(struct rtw_ieee80211_hdr_3addr)-_PUBLIC_ACTION_IE_OFFSET_, ++ NULL, &p2p_ielen); ++ ++ switch( OUI_Subtype )//OUI Subtype ++ { ++ u8 *cont; ++ uint cont_len; ++ case P2P_GO_NEGO_REQ: ++ { ++ struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info; ++ ++ if (tx) { ++ #ifdef CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2 ++ if(pwdev_priv->provdisc_req_issued == _FALSE) { ++ rtw_cfg80211_issue_p2p_provision_request(padapter, buf, len); ++ pwdev_priv->provdisc_req_issued = _TRUE; ++ rtw_msleep_os(200); ++ } ++ #endif //CONFIG_DRV_ISSUE_PROV_REQ ++ ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) ++ rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++ #endif ++ } ++ ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len))) ++ op_ch = *(cont+4); ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_LISTEN_CH, NULL, &cont_len))) ++ listen_ch = *(cont+4); ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT, NULL, &cont_len))) ++ intent = *cont; ++ ++ if (nego_info->token != dialogToken) ++ rtw_wdev_nego_info_init(nego_info); ++ ++ _rtw_memcpy(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN); ++ nego_info->active = tx ? 1 : 0; ++ nego_info->token = dialogToken; ++ nego_info->req_op_ch = op_ch; ++ nego_info->req_listen_ch = listen_ch; ++ nego_info->req_intent = intent; ++ nego_info->state = 0; ++ ++ dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128); ++ DBG_871X("RTW_%s:P2P_GO_NEGO_REQ, dialogToken=%d, intent:%u%s, listen_ch:%d, op_ch:%d, ch_list:%s\n", ++ (tx==_TRUE)?"Tx":"Rx", dialogToken, (intent>>1), intent&0x1 ? "+" : "-", listen_ch, op_ch, ch_list_buf); ++ ++ if (!tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED) ++ && rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) ++ { ++ DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter)); ++ rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0); ++ } ++ #endif ++ } ++ ++ break; ++ } ++ case P2P_GO_NEGO_RESP: ++ { ++ struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info; ++ ++ if (tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) ++ rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++ #endif ++ } ++ ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len))) ++ op_ch = *(cont+4); ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT, NULL, &cont_len))) ++ intent = *cont; ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len))) ++ status = *cont; ++ ++ if (nego_info->token == dialogToken && nego_info->state == 0 ++ && _rtw_memcmp(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE ++ ) { ++ nego_info->status = (status==-1) ? 0xff : status; ++ nego_info->rsp_op_ch= op_ch; ++ nego_info->rsp_intent = intent; ++ nego_info->state = 1; ++ if (status != 0) ++ nego_info->token = 0; /* init */ ++ } ++ ++ dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128); ++ DBG_871X("RTW_%s:P2P_GO_NEGO_RESP, dialogToken=%d, intent:%u%s, status:%d, op_ch:%d, ch_list:%s\n", ++ (tx==_TRUE)?"Tx":"Rx", dialogToken, (intent>>1), intent&0x1 ? "+" : "-", status, op_ch, ch_list_buf); ++ ++ if (!tx) { ++ pwdev_priv->provdisc_req_issued = _FALSE; ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED) ++ && rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) ++ { ++ DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter)); ++ rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0); ++ } ++ #endif ++ } ++ ++ break; ++ } ++ case P2P_GO_NEGO_CONF: ++ { ++ struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info; ++ bool is_go = _FALSE; ++ ++ if (tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) ++ rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++ #endif ++ } ++ ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len))) ++ op_ch = *(cont+4); ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len))) ++ status = *cont; ++ ++ if (nego_info->token == dialogToken && nego_info->state == 1 ++ && _rtw_memcmp(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE ++ ) { ++ nego_info->status = (status==-1) ? 0xff : status; ++ nego_info->conf_op_ch = (op_ch==-1) ? 0 : op_ch; ++ nego_info->state = 2; ++ ++ if (status == 0) { ++ if (rtw_p2p_nego_intent_compare(nego_info->req_intent, nego_info->rsp_intent) && tx) ++ is_go = _TRUE; ++ } ++ ++ nego_info->token = 0; /* init */ ++ } ++ ++ dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128); ++ DBG_871X("RTW_%s:P2P_GO_NEGO_CONF, dialogToken=%d, status:%d, op_ch:%d, ch_list:%s\n", ++ (tx==_TRUE)?"Tx":"Rx", dialogToken, status, op_ch, ch_list_buf); ++ ++ if (!tx) { ++ } ++ ++ break; ++ } ++ case P2P_INVIT_REQ: ++ { ++ struct rtw_wdev_invit_info* invit_info = &pwdev_priv->invit_info; ++ int flags = -1; ++ ++ if (tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) ++ rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++ #endif ++ } ++ ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_INVITATION_FLAGS, NULL, &cont_len))) ++ flags = *cont; ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len))) ++ op_ch = *(cont+4); ++ ++ if (invit_info->token != dialogToken) ++ rtw_wdev_invit_info_init(invit_info); ++ ++ _rtw_memcpy(invit_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN); ++ invit_info->active = tx ? 1 : 0; ++ invit_info->token = dialogToken; ++ invit_info->flags = (flags==-1) ? 0x0 : flags; ++ invit_info->req_op_ch= op_ch; ++ invit_info->state = 0; ++ ++ dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128); ++ DBG_871X("RTW_%s:P2P_INVIT_REQ, dialogToken=%d, flags:0x%02x, op_ch:%d, ch_list:%s\n", ++ (tx==_TRUE)?"Tx":"Rx", dialogToken, flags, op_ch, ch_list_buf); ++ ++ if (!tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) { ++ if (op_ch != -1 && rtw_chk_p2pie_op_ch_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) { ++ DBG_871X(FUNC_ADPT_FMT" op_ch:%u has no intersect with buddy\n", FUNC_ADPT_ARG(padapter), op_ch); ++ rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0); ++ } else if (rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) { ++ DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter)); ++ rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0); ++ } ++ } ++ #endif ++ } ++ ++ break; ++ } ++ case P2P_INVIT_RESP: ++ { ++ struct rtw_wdev_invit_info* invit_info = &pwdev_priv->invit_info; ++ ++ if (tx) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED)) ++ rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)); ++ #endif ++ } ++ ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len))) ++ { ++#ifdef CONFIG_P2P_INVITE_IOT ++ if(tx && *cont==7) ++ { ++ DBG_871X("TX_P2P_INVITE_RESP, status is no common channel, change to unknown group\n"); ++ *cont = 8; //unknow group status ++ } ++#endif //CONFIG_P2P_INVITE_IOT ++ status = *cont; ++ } ++ if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len))) ++ op_ch = *(cont+4); ++ ++ if (invit_info->token == dialogToken && invit_info->state == 0 ++ && _rtw_memcmp(invit_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE ++ ) { ++ invit_info->status = (status==-1) ? 0xff : status; ++ invit_info->rsp_op_ch= op_ch; ++ invit_info->state = 1; ++ invit_info->token = 0; /* init */ ++ } ++ ++ dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128); ++ DBG_871X("RTW_%s:P2P_INVIT_RESP, dialogToken=%d, status:%d, op_ch:%d, ch_list:%s\n", ++ (tx==_TRUE)?"Tx":"Rx", dialogToken, status, op_ch, ch_list_buf); ++ ++ if (!tx) { ++ } ++ ++ break; ++ } ++ case P2P_DEVDISC_REQ: ++ DBG_871X("RTW_%s:P2P_DEVDISC_REQ, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken); ++ break; ++ case P2P_DEVDISC_RESP: ++ cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len); ++ DBG_871X("RTW_%s:P2P_DEVDISC_RESP, dialogToken=%d, status:%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken, cont?*cont:-1); ++ break; ++ case P2P_PROVISION_DISC_REQ: ++ { ++ size_t frame_body_len = len - sizeof(struct rtw_ieee80211_hdr_3addr); ++ u8 *p2p_ie; ++ uint p2p_ielen = 0; ++ uint contentlen = 0; ++ ++ DBG_871X("RTW_%s:P2P_PROVISION_DISC_REQ, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken); ++ ++ //if(tx) ++ { ++ pwdev_priv->provdisc_req_issued = _FALSE; ++ ++ if( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen))) ++ { ++ ++ if(rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, NULL, &contentlen)) ++ { ++ pwdev_priv->provdisc_req_issued = _FALSE;//case: p2p_client join p2p GO ++ } ++ else ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("provdisc_req_issued is _TRUE\n"); ++ #endif //CONFIG_DEBUG_CFG80211 ++ pwdev_priv->provdisc_req_issued = _TRUE;//case: p2p_devices connection before Nego req. ++ } ++ ++ } ++ } ++ } ++ break; ++ case P2P_PROVISION_DISC_RESP: ++ DBG_871X("RTW_%s:P2P_PROVISION_DISC_RESP, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken); ++ break; ++ default: ++ DBG_871X("RTW_%s:OUI_Subtype=%d, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", OUI_Subtype, dialogToken); ++ break; ++ } ++ ++ } ++ ++ } ++ else if(category == RTW_WLAN_CATEGORY_P2P) ++ { ++ OUI_Subtype = frame_body[5]; ++ dialogToken = frame_body[6]; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("ACTION_CATEGORY_P2P: OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n", ++ cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ), OUI_Subtype, dialogToken); ++ #endif ++ ++ is_p2p_frame = OUI_Subtype; ++ ++ switch(OUI_Subtype) ++ { ++ case P2P_NOTICE_OF_ABSENCE: ++ DBG_871X("RTW_%s:P2P_NOTICE_OF_ABSENCE, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken); ++ break; ++ case P2P_PRESENCE_REQUEST: ++ DBG_871X("RTW_%s:P2P_PRESENCE_REQUEST, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken); ++ break; ++ case P2P_PRESENCE_RESPONSE: ++ DBG_871X("RTW_%s:P2P_PRESENCE_RESPONSE, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken); ++ break; ++ case P2P_GO_DISC_REQUEST: ++ DBG_871X("RTW_%s:P2P_GO_DISC_REQUEST, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken); ++ break; ++ default: ++ DBG_871X("RTW_%s:OUI_Subtype=%d, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", OUI_Subtype, dialogToken); ++ break; ++ } ++ ++ } ++ else ++ { ++ DBG_871X("RTW_%s:action frame category=%d\n", (tx==_TRUE)?"TX":"RX", category); ++ } ++ ++ return is_p2p_frame; ++} ++ ++void rtw_init_cfg80211_wifidirect_info( _adapter* padapter) ++{ ++ struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo; ++ ++ _rtw_memset(pcfg80211_wdinfo, 0x00, sizeof(struct cfg80211_wifidirect_info) ); ++ ++ _init_timer( &pcfg80211_wdinfo->remain_on_ch_timer, padapter->pnetdev, ro_ch_timer_process, padapter ); ++} ++#endif //CONFIG_IOCTL_CFG80211 ++ ++void p2p_protocol_wk_hdl(_adapter *padapter, int intCmdType) ++{ ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++_func_enter_; ++ ++ switch(intCmdType) ++ { ++ case P2P_FIND_PHASE_WK: ++ { ++ find_phase_handler( padapter ); ++ break; ++ } ++ case P2P_RESTORE_STATE_WK: ++ { ++ restore_p2p_state_handler( padapter ); ++ break; ++ } ++ case P2P_PRE_TX_PROVDISC_PROCESS_WK: ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ p2p_concurrent_handler( padapter ); ++ } ++ else ++ { ++ pre_tx_provdisc_handler( padapter ); ++ } ++#else ++ pre_tx_provdisc_handler( padapter ); ++#endif ++ break; ++ } ++ case P2P_PRE_TX_INVITEREQ_PROCESS_WK: ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ p2p_concurrent_handler( padapter ); ++ } ++ else ++ { ++ pre_tx_invitereq_handler( padapter ); ++ } ++#else ++ pre_tx_invitereq_handler( padapter ); ++#endif ++ break; ++ } ++ case P2P_PRE_TX_NEGOREQ_PROCESS_WK: ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ p2p_concurrent_handler( padapter ); ++ } ++ else ++ { ++ pre_tx_negoreq_handler( padapter ); ++ } ++#else ++ pre_tx_negoreq_handler( padapter ); ++#endif ++ break; ++ } ++#ifdef CONFIG_P2P ++#ifdef CONFIG_CONCURRENT_MODE ++ case P2P_AP_P2P_CH_SWITCH_PROCESS_WK: ++ { ++ p2p_concurrent_handler( padapter ); ++ break; ++ } ++#endif ++#endif ++#ifdef CONFIG_IOCTL_CFG80211 ++ case P2P_RO_CH_WK: ++ { ++ ro_ch_handler( padapter ); ++ break; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ } ++ ++_func_exit_; ++} ++ ++#ifdef CONFIG_P2P_PS ++void process_p2p_ps_ie(PADAPTER padapter, u8 *IEs, u32 IELength) ++{ ++ u8 * ies; ++ u32 ies_len; ++ u8 * p2p_ie; ++ u32 p2p_ielen = 0; ++ u8 noa_attr[MAX_P2P_IE_LEN] = { 0x00 };// NoA length should be n*(13) + 2 ++ u32 attr_contentlen = 0; ++ ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ u8 find_p2p = _FALSE, find_p2p_ps = _FALSE; ++ u8 noa_offset, noa_num, noa_index; ++ ++_func_enter_; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ return; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type != IFACE_PORT0) ++ return; ++#endif ++ if(IELength <= _BEACON_IE_OFFSET_) ++ return; ++ ++ ies = IEs + _BEACON_IE_OFFSET_; ++ ies_len = IELength - _BEACON_IE_OFFSET_; ++ ++ p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen); ++ ++ while(p2p_ie) ++ { ++ find_p2p = _TRUE; ++ // Get Notice of Absence IE. ++ if(rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_NOA, noa_attr, &attr_contentlen)) ++ { ++ find_p2p_ps = _TRUE; ++ noa_index = noa_attr[0]; ++ ++ if( (pwdinfo->p2p_ps_mode == P2P_PS_NONE) || ++ (noa_index != pwdinfo->noa_index) )// if index change, driver should reconfigure related setting. ++ { ++ pwdinfo->noa_index = noa_index; ++ pwdinfo->opp_ps = noa_attr[1] >> 7; ++ pwdinfo->ctwindow = noa_attr[1] & 0x7F; ++ ++ noa_offset = 2; ++ noa_num = 0; ++ // NoA length should be n*(13) + 2 ++ if(attr_contentlen > 2) ++ { ++ while(noa_offset < attr_contentlen) ++ { ++ //_rtw_memcpy(&wifidirect_info->noa_count[noa_num], &noa_attr[noa_offset], 1); ++ pwdinfo->noa_count[noa_num] = noa_attr[noa_offset]; ++ noa_offset += 1; ++ ++ _rtw_memcpy(&pwdinfo->noa_duration[noa_num], &noa_attr[noa_offset], 4); ++ noa_offset += 4; ++ ++ _rtw_memcpy(&pwdinfo->noa_interval[noa_num], &noa_attr[noa_offset], 4); ++ noa_offset += 4; ++ ++ _rtw_memcpy(&pwdinfo->noa_start_time[noa_num], &noa_attr[noa_offset], 4); ++ noa_offset += 4; ++ ++ noa_num++; ++ } ++ } ++ pwdinfo->noa_num = noa_num; ++ ++ if( pwdinfo->opp_ps == 1 ) ++ { ++ pwdinfo->p2p_ps_mode = P2P_PS_CTWINDOW; ++ // driver should wait LPS for entering CTWindow ++ if(padapter->pwrctrlpriv.bFwCurrentInPSMode == _TRUE) ++ { ++ p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 1); ++ } ++ } ++ else if( pwdinfo->noa_num > 0 ) ++ { ++ pwdinfo->p2p_ps_mode = P2P_PS_NOA; ++ p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 1); ++ } ++ else if( pwdinfo->p2p_ps_mode > P2P_PS_NONE) ++ { ++ p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1); ++ } ++ } ++ ++ break; // find target, just break. ++ } ++ ++ //Get the next P2P IE ++ p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen); ++ ++ } ++ ++ if(find_p2p == _TRUE) ++ { ++ if( (pwdinfo->p2p_ps_mode > P2P_PS_NONE) && (find_p2p_ps == _FALSE) ) ++ { ++ p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1); ++ } ++ } ++ ++_func_exit_; ++} ++ ++void p2p_ps_wk_hdl(_adapter *padapter, u8 p2p_ps_state) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++_func_enter_; ++ ++ switch(p2p_ps_state) ++ { ++ case P2P_PS_DISABLE: ++ pwdinfo->p2p_ps_state = p2p_ps_state; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state)); ++ ++ pwdinfo->noa_index = 0; ++ pwdinfo->ctwindow = 0; ++ pwdinfo->opp_ps = 0; ++ pwdinfo->noa_num = 0; ++ pwdinfo->p2p_ps_mode = P2P_PS_NONE; ++ if(padapter->pwrctrlpriv.bFwCurrentInPSMode == _TRUE) ++ { ++ if(pwrpriv->smart_ps == 0) ++ { ++ pwrpriv->smart_ps = 2; ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&(padapter->pwrctrlpriv.pwr_mode))); ++ } ++ } ++ break; ++ case P2P_PS_ENABLE: ++ if (pwdinfo->p2p_ps_mode > P2P_PS_NONE) { ++ pwdinfo->p2p_ps_state = p2p_ps_state; ++ ++ if( pwdinfo->ctwindow > 0 ) ++ { ++ if(pwrpriv->smart_ps != 0) ++ { ++ pwrpriv->smart_ps = 0; ++ DBG_871X("%s(): Enter CTW, change SmartPS\n", __FUNCTION__); ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&(padapter->pwrctrlpriv.pwr_mode))); ++ } ++ } ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state)); ++ } ++ break; ++ case P2P_PS_SCAN: ++ case P2P_PS_SCAN_DONE: ++ case P2P_PS_ALLSTASLEEP: ++ if (pwdinfo->p2p_ps_mode > P2P_PS_NONE) { ++ pwdinfo->p2p_ps_state = p2p_ps_state; ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state)); ++ } ++ break; ++ default: ++ break; ++ } ++ ++_func_exit_; ++} ++ ++u8 p2p_ps_wk_cmd(_adapter*padapter, u8 p2p_ps_state, u8 enqueue) ++{ ++ struct cmd_obj *ph2c; ++ struct drvextra_cmd_parm *pdrvextra_cmd_parm; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct cmd_priv *pcmdpriv = &padapter->cmdpriv; ++ u8 res = _SUCCESS; ++ ++_func_enter_; ++ ++ if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) ++#ifdef CONFIG_CONCURRENT_MODE ++ || (padapter->iface_type != IFACE_PORT0) ++#endif ++ ) ++ { ++ return res; ++ } ++ ++ if(enqueue) ++ { ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(ph2c==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); ++ if(pdrvextra_cmd_parm==NULL){ ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pdrvextra_cmd_parm->ec_id = P2P_PS_WK_CID; ++ pdrvextra_cmd_parm->type_size = p2p_ps_state; ++ pdrvextra_cmd_parm->pbuf = NULL; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra)); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ } ++ else ++ { ++ p2p_ps_wk_hdl(padapter, p2p_ps_state); ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++#endif // CONFIG_P2P_PS ++ ++static void reset_ch_sitesurvey_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ // Reset the operation channel information ++ pwdinfo->rx_invitereq_info.operation_ch[0] = 0; ++#ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.operation_ch[1] = 0; ++ pwdinfo->rx_invitereq_info.operation_ch[2] = 0; ++ pwdinfo->rx_invitereq_info.operation_ch[3] = 0; ++#endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.scan_op_ch_only = 0; ++} ++ ++static void reset_ch_sitesurvey_timer_process2 (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ // Reset the operation channel information ++ pwdinfo->p2p_info.operation_ch[0] = 0; ++#ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.operation_ch[1] = 0; ++ pwdinfo->p2p_info.operation_ch[2] = 0; ++ pwdinfo->p2p_info.operation_ch[3] = 0; ++#endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.scan_op_ch_only = 0; ++} ++ ++static void restore_p2p_state_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++ p2p_protocol_wk_cmd( adapter, P2P_RESTORE_STATE_WK ); ++} ++ ++static void pre_tx_scan_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *) FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ u8 _status = 0; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ // Commented by Albert 20110805 ++ // Todo: Use the issuing probe request directly instead of using the rtw_sitesurvey_cmd!! ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ)) ++ { ++ if ( _TRUE == pwdinfo->tx_prov_disc_info.benable ) // the provision discovery request frame is trigger to send or not ++ { ++ p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_PROVDISC_PROCESS_WK ); ++ //issue_probereq_p2p(adapter, NULL); ++ //_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ } ++ } ++ else if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING)) ++ { ++ if ( _TRUE == pwdinfo->nego_req_info.benable ) ++ { ++ p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_NEGOREQ_PROCESS_WK ); ++ //issue_probereq_p2p(adapter, NULL); ++ //_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ } ++ } ++ else if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) ) ++ { ++ if ( _TRUE == pwdinfo->invitereq_info.benable ) ++ { ++ p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_INVITEREQ_PROCESS_WK ); ++ } ++ } ++ else ++ { ++ DBG_8192C( "[%s] p2p_state is %d, ignore!!\n", __FUNCTION__, rtw_p2p_state(pwdinfo) ); ++ } ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++static void find_phase_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++ adapter->wdinfo.find_phase_state_exchange_cnt++; ++ ++ p2p_protocol_wk_cmd( adapter, P2P_FIND_PHASE_WK ); ++} ++ ++#ifdef CONFIG_CONCURRENT_MODE ++void ap_p2p_switch_timer_process (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct wifidirect_info *pwdinfo = &adapter->wdinfo; ++#ifdef CONFIG_IOCTL_CFG80211 ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev); ++#endif ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ ATOMIC_SET(&pwdev_priv->switch_ch_to, 1); ++#endif ++ ++ p2p_protocol_wk_cmd( adapter, P2P_AP_P2P_CH_SWITCH_PROCESS_WK ); ++} ++#endif ++ ++void reset_global_wifidirect_info( _adapter* padapter ) ++{ ++ struct wifidirect_info *pwdinfo; ++ ++ pwdinfo = &padapter->wdinfo; ++ pwdinfo->persistent_supported = 0; ++ pwdinfo->session_available = _TRUE; ++ pwdinfo->wfd_tdls_enable = 0; ++ pwdinfo->wfd_tdls_weaksec = 0; ++} ++ ++#ifdef CONFIG_WFD ++int rtw_init_wifi_display_info(_adapter* padapter) ++{ ++ int res = _SUCCESS; ++ struct wifi_display_info *pwfd_info = &padapter->wfd_info; ++ ++ // Used in P2P and TDLS ++ pwfd_info->rtsp_ctrlport = 554; ++ pwfd_info->peer_rtsp_ctrlport = 0; // Reset to 0 ++ pwfd_info->wfd_enable = _FALSE; ++ pwfd_info->wfd_device_type = WFD_DEVINFO_PSINK; ++ pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY; ++ ++ // Used in P2P ++ pwfd_info->peer_session_avail = _TRUE; ++ pwfd_info->wfd_pc = _FALSE; ++ ++ // Used in TDLS ++ _rtw_memset( pwfd_info->ip_address, 0x00, 4 ); ++ _rtw_memset( pwfd_info->peer_ip_address, 0x00, 4 ); ++ return res; ++ ++} ++#endif //CONFIG_WFD ++ ++void rtw_init_wifidirect_timers(_adapter* padapter) ++{ ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ ++ _init_timer( &pwdinfo->find_phase_timer, padapter->pnetdev, find_phase_timer_process, padapter ); ++ _init_timer( &pwdinfo->restore_p2p_state_timer, padapter->pnetdev, restore_p2p_state_timer_process, padapter ); ++ _init_timer( &pwdinfo->pre_tx_scan_timer, padapter->pnetdev, pre_tx_scan_timer_process, padapter ); ++ _init_timer( &pwdinfo->reset_ch_sitesurvey, padapter->pnetdev, reset_ch_sitesurvey_timer_process, padapter ); ++ _init_timer( &pwdinfo->reset_ch_sitesurvey2, padapter->pnetdev, reset_ch_sitesurvey_timer_process2, padapter ); ++#ifdef CONFIG_CONCURRENT_MODE ++ _init_timer( &pwdinfo->ap_p2p_switch_timer, padapter->pnetdev, ap_p2p_switch_timer_process, padapter ); ++#endif ++} ++ ++void rtw_init_wifidirect_addrs(_adapter* padapter, u8 *dev_addr, u8 *iface_addr) ++{ ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ ++ /*init device&interface address */ ++ if (dev_addr) { ++ _rtw_memcpy(pwdinfo->device_addr, dev_addr, ETH_ALEN); ++ } ++ if (iface_addr) { ++ _rtw_memcpy(pwdinfo->interface_addr, iface_addr, ETH_ALEN); ++ } ++#endif ++} ++ ++void init_wifidirect_info( _adapter* padapter, enum P2P_ROLE role) ++{ ++ struct wifidirect_info *pwdinfo; ++#ifdef CONFIG_WFD ++ struct wifi_display_info *pwfd_info = &padapter->wfd_info; ++#endif ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct wifidirect_info *pbuddy_wdinfo; ++ struct mlme_priv *pbuddy_mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext; ++#endif ++ ++ pwdinfo = &padapter->wdinfo; ++ ++ pwdinfo->padapter = padapter; ++ ++ // 1, 6, 11 are the social channel defined in the WiFi Direct specification. ++ pwdinfo->social_chan[0] = 1; ++ pwdinfo->social_chan[1] = 6; ++ pwdinfo->social_chan[2] = 11; ++ pwdinfo->social_chan[3] = 0; // channel 0 for scanning ending in site survey function. ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (pbuddy_adapter) { ++ pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ } ++ ++ if ( ( check_buddy_fwstate(padapter, _FW_LINKED ) == _TRUE ) && ++ ( ( pbuddy_mlmeext->cur_channel == 1) || ( pbuddy_mlmeext->cur_channel == 6 ) || ( pbuddy_mlmeext->cur_channel == 11 ) ) ++ ) ++ { ++ // Use the AP's channel as the listen channel ++ // This will avoid the channel switch between AP's channel and listen channel. ++ pwdinfo->listen_channel = pbuddy_mlmeext->cur_channel; ++ } ++ else ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ // Use the channel 11 as the listen channel ++ pwdinfo->listen_channel = 11; ++ } ++ ++ if (role == P2P_ROLE_DEVICE) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ #ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) == _TRUE ) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_IDLE); ++ } ++ else ++ #endif ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN); ++ } ++ pwdinfo->intent = 1; ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_LISTEN); ++ } ++ else if (role == P2P_ROLE_CLIENT) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ pwdinfo->intent = 1; ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ } ++ else if (role == P2P_ROLE_GO) ++ { ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ pwdinfo->intent = 15; ++ rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ } ++ ++// Use the OFDM rate in the P2P probe response frame. ( 6(B), 9(B), 12, 18, 24, 36, 48, 54 ) ++ pwdinfo->support_rate[0] = 0x8c; // 6(B) ++ pwdinfo->support_rate[1] = 0x92; // 9(B) ++ pwdinfo->support_rate[2] = 0x18; // 12 ++ pwdinfo->support_rate[3] = 0x24; // 18 ++ pwdinfo->support_rate[4] = 0x30; // 24 ++ pwdinfo->support_rate[5] = 0x48; // 36 ++ pwdinfo->support_rate[6] = 0x60; // 48 ++ pwdinfo->support_rate[7] = 0x6c; // 54 ++ ++ _rtw_memcpy( ( void* ) pwdinfo->p2p_wildcard_ssid, "DIRECT-", 7 ); ++ ++ _rtw_memset( pwdinfo->device_name, 0x00, WPS_MAX_DEVICE_NAME_LEN ); ++ pwdinfo->device_name_len = 0; ++ ++ _rtw_memset( &pwdinfo->invitereq_info, 0x00, sizeof( struct tx_invite_req_info ) ); ++ pwdinfo->invitereq_info.token = 3; // Token used for P2P invitation request frame. ++ ++ _rtw_memset( &pwdinfo->inviteresp_info, 0x00, sizeof( struct tx_invite_resp_info ) ); ++ pwdinfo->inviteresp_info.token = 0; ++ ++ pwdinfo->profileindex = 0; ++ _rtw_memset( &pwdinfo->profileinfo[ 0 ], 0x00, sizeof( struct profile_info ) * P2P_MAX_PERSISTENT_GROUP_NUM ); ++ ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE); ++ ++ pwdinfo->listen_dwell = ( u8 ) (( rtw_get_current_time() % 3 ) + 1); ++ //DBG_8192C( "[%s] listen_dwell time is %d00ms\n", __FUNCTION__, pwdinfo->listen_dwell ); ++ ++ _rtw_memset( &pwdinfo->tx_prov_disc_info, 0x00, sizeof( struct tx_provdisc_req_info ) ); ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_NONE; ++ ++ _rtw_memset( &pwdinfo->nego_req_info, 0x00, sizeof( struct tx_nego_req_info ) ); ++ ++ pwdinfo->device_password_id_for_nego = WPS_DPID_PBC; ++ pwdinfo->negotiation_dialog_token = 1; ++ ++ _rtw_memset( pwdinfo->nego_ssid, 0x00, WLAN_SSID_MAXLEN ); ++ pwdinfo->nego_ssidlen = 0; ++ ++ pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO; ++#ifdef CONFIG_WFD ++ pwdinfo->supported_wps_cm = WPS_CONFIG_METHOD_DISPLAY | WPS_CONFIG_METHOD_PBC; ++ pwdinfo->wfd_info = pwfd_info; ++#else ++ pwdinfo->supported_wps_cm = WPS_CONFIG_METHOD_DISPLAY | WPS_CONFIG_METHOD_PBC | WPS_CONFIG_METHOD_KEYPAD; ++#endif //CONFIG_WFD ++ pwdinfo->channel_list_attr_len = 0; ++ _rtw_memset( pwdinfo->channel_list_attr, 0x00, 100 ); ++ ++ _rtw_memset( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, 0x00, 4 ); ++ _rtw_memset( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, '0', 3 ); ++ _rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) ); ++#ifdef CONFIG_CONCURRENT_MODE ++#ifdef CONFIG_IOCTL_CFG80211 ++ pwdinfo->ext_listen_interval = 1000; //The interval to be available with legacy AP during p2p0-find/scan ++ pwdinfo->ext_listen_period = 3000; //The time period to be available for P2P during nego ++#else //!CONFIG_IOCTL_CFG80211 ++ //pwdinfo->ext_listen_interval = 3000; ++ //pwdinfo->ext_listen_period = 400; ++ pwdinfo->ext_listen_interval = 1000; ++ pwdinfo->ext_listen_period = 1000; ++#endif //!CONFIG_IOCTL_CFG80211 ++#endif ++ ++// Commented by Kurt 20130319 ++// For WiDi purpose: Use CFG80211 interface but controled WFD/RDS frame by driver itself. ++#ifdef CONFIG_IOCTL_CFG80211 ++ pwdinfo->driver_interface = DRIVER_CFG80211; ++#else ++ pwdinfo->driver_interface = DRIVER_WEXT; ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ pwdinfo->wfd_tdls_enable = 0; ++ _rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN ); ++ _rtw_memset( pwdinfo->p2p_peer_device_addr, 0x00, ETH_ALEN ); ++ ++ pwdinfo->rx_invitereq_info.operation_ch[0] = 0; ++ pwdinfo->rx_invitereq_info.operation_ch[1] = 0; // Used to indicate the scan end in site survey function ++#ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.operation_ch[2] = 0; ++ pwdinfo->rx_invitereq_info.operation_ch[3] = 0; ++ pwdinfo->rx_invitereq_info.operation_ch[4] = 0; ++#endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->rx_invitereq_info.scan_op_ch_only = 0; ++ pwdinfo->p2p_info.operation_ch[0] = 0; ++ pwdinfo->p2p_info.operation_ch[1] = 0; // Used to indicate the scan end in site survey function ++#ifdef P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.operation_ch[2] = 0; ++ pwdinfo->p2p_info.operation_ch[3] = 0; ++ pwdinfo->p2p_info.operation_ch[4] = 0; ++#endif //P2P_OP_CHECK_SOCIAL_CH ++ pwdinfo->p2p_info.scan_op_ch_only = 0; ++} ++ ++#ifdef CONFIG_DBG_P2P ++ ++/** ++ * rtw_p2p_role_txt - Get the p2p role name as a text string ++ * @role: P2P role ++ * Returns: The state name as a printable text string ++ */ ++const char * rtw_p2p_role_txt(enum P2P_ROLE role) ++{ ++ switch (role) { ++ case P2P_ROLE_DISABLE: ++ return "P2P_ROLE_DISABLE"; ++ case P2P_ROLE_DEVICE: ++ return "P2P_ROLE_DEVICE"; ++ case P2P_ROLE_CLIENT: ++ return "P2P_ROLE_CLIENT"; ++ case P2P_ROLE_GO: ++ return "P2P_ROLE_GO"; ++ default: ++ return "UNKNOWN"; ++ } ++} ++ ++/** ++ * rtw_p2p_state_txt - Get the p2p state name as a text string ++ * @state: P2P state ++ * Returns: The state name as a printable text string ++ */ ++const char * rtw_p2p_state_txt(enum P2P_STATE state) ++{ ++ switch (state) { ++ case P2P_STATE_NONE: ++ return "P2P_STATE_NONE"; ++ case P2P_STATE_IDLE: ++ return "P2P_STATE_IDLE"; ++ case P2P_STATE_LISTEN: ++ return "P2P_STATE_LISTEN"; ++ case P2P_STATE_SCAN: ++ return "P2P_STATE_SCAN"; ++ case P2P_STATE_FIND_PHASE_LISTEN: ++ return "P2P_STATE_FIND_PHASE_LISTEN"; ++ case P2P_STATE_FIND_PHASE_SEARCH: ++ return "P2P_STATE_FIND_PHASE_SEARCH"; ++ case P2P_STATE_TX_PROVISION_DIS_REQ: ++ return "P2P_STATE_TX_PROVISION_DIS_REQ"; ++ case P2P_STATE_RX_PROVISION_DIS_RSP: ++ return "P2P_STATE_RX_PROVISION_DIS_RSP"; ++ case P2P_STATE_RX_PROVISION_DIS_REQ: ++ return "P2P_STATE_RX_PROVISION_DIS_REQ"; ++ case P2P_STATE_GONEGO_ING: ++ return "P2P_STATE_GONEGO_ING"; ++ case P2P_STATE_GONEGO_OK: ++ return "P2P_STATE_GONEGO_OK"; ++ case P2P_STATE_GONEGO_FAIL: ++ return "P2P_STATE_GONEGO_FAIL"; ++ case P2P_STATE_RECV_INVITE_REQ_MATCH: ++ return "P2P_STATE_RECV_INVITE_REQ_MATCH"; ++ case P2P_STATE_PROVISIONING_ING: ++ return "P2P_STATE_PROVISIONING_ING"; ++ case P2P_STATE_PROVISIONING_DONE: ++ return "P2P_STATE_PROVISIONING_DONE"; ++ case P2P_STATE_TX_INVITE_REQ: ++ return "P2P_STATE_TX_INVITE_REQ"; ++ case P2P_STATE_RX_INVITE_RESP_OK: ++ return "P2P_STATE_RX_INVITE_RESP_OK"; ++ case P2P_STATE_RECV_INVITE_REQ_DISMATCH: ++ return "P2P_STATE_RECV_INVITE_REQ_DISMATCH"; ++ case P2P_STATE_RECV_INVITE_REQ_GO: ++ return "P2P_STATE_RECV_INVITE_REQ_GO"; ++ case P2P_STATE_RECV_INVITE_REQ_JOIN: ++ return "P2P_STATE_RECV_INVITE_REQ_JOIN"; ++ case P2P_STATE_RX_INVITE_RESP_FAIL: ++ return "P2P_STATE_RX_INVITE_RESP_FAIL"; ++ case P2P_STATE_RX_INFOR_NOREADY: ++ return "P2P_STATE_RX_INFOR_NOREADY"; ++ case P2P_STATE_TX_INFOR_NOREADY: ++ return "P2P_STATE_TX_INFOR_NOREADY"; ++ default: ++ return "UNKNOWN"; ++ } ++} ++ ++void dbg_rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line) ++{ ++ if(!_rtw_p2p_chk_state(wdinfo, state)) { ++ enum P2P_STATE old_state = _rtw_p2p_state(wdinfo); ++ _rtw_p2p_set_state(wdinfo, state); ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_state from %s to %s\n", caller, line ++ , rtw_p2p_state_txt(old_state), rtw_p2p_state_txt(_rtw_p2p_state(wdinfo)) ++ ); ++ } else { ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_state to same state %s\n", caller, line ++ , rtw_p2p_state_txt(_rtw_p2p_state(wdinfo)) ++ ); ++ } ++} ++void dbg_rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line) ++{ ++ if(_rtw_p2p_pre_state(wdinfo) != state) { ++ enum P2P_STATE old_state = _rtw_p2p_pre_state(wdinfo); ++ _rtw_p2p_set_pre_state(wdinfo, state); ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_pre_state from %s to %s\n", caller, line ++ , rtw_p2p_state_txt(old_state), rtw_p2p_state_txt(_rtw_p2p_pre_state(wdinfo)) ++ ); ++ } else { ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_pre_state to same state %s\n", caller, line ++ , rtw_p2p_state_txt(_rtw_p2p_pre_state(wdinfo)) ++ ); ++ } ++} ++#if 0 ++void dbg_rtw_p2p_restore_state(struct wifidirect_info *wdinfo, const char *caller, int line) ++{ ++ if(wdinfo->pre_p2p_state != -1) { ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d restore from %s to %s\n", caller, line ++ , p2p_state_str[wdinfo->p2p_state], p2p_state_str[wdinfo->pre_p2p_state] ++ ); ++ _rtw_p2p_restore_state(wdinfo); ++ } else { ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d restore no pre state, cur state %s\n", caller, line ++ , p2p_state_str[wdinfo->p2p_state] ++ ); ++ } ++} ++#endif ++void dbg_rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role, const char *caller, int line) ++{ ++ if(wdinfo->role != role) { ++ enum P2P_ROLE old_role = wdinfo->role; ++ _rtw_p2p_set_role(wdinfo, role); ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_role from %s to %s\n", caller, line ++ , rtw_p2p_role_txt(old_role), rtw_p2p_role_txt(wdinfo->role) ++ ); ++ } else { ++ DBG_871X("[CONFIG_DBG_P2P]%s:%d set_role to same role %s\n", caller, line ++ , rtw_p2p_role_txt(wdinfo->role) ++ ); ++ } ++} ++#endif //CONFIG_DBG_P2P ++ ++ ++int rtw_p2p_enable(_adapter *padapter, enum P2P_ROLE role) ++{ ++ int ret = _SUCCESS; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++ if (role == P2P_ROLE_DEVICE || role == P2P_ROLE_CLIENT|| role == P2P_ROLE_GO) ++ { ++ u8 channel, ch_offset; ++ u16 bwmode; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ // Commented by Albert 2011/12/30 ++ // The driver just supports 1 P2P group operation. ++ // So, this function will do nothing if the buddy adapter had enabled the P2P function. ++ if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE)) ++ { ++ // The buddy adapter had enabled the P2P function. ++ return ret; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ //leave IPS/Autosuspend ++ if (_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ ++ // Added by Albert 2011/03/22 ++ // In the P2P mode, the driver should not support the b mode. ++ // So, the Tx packet shouldn't use the CCK rate ++ update_tx_basic_rate(padapter, WIRELESS_11AGN); ++ ++ //Enable P2P function ++ init_wifidirect_info(padapter, role); ++ } ++ else if (role == P2P_ROLE_DISABLE) ++ { ++#ifdef CONFIG_INTEL_WIDI ++ if( padapter->mlmepriv.p2p_reject_disable == _TRUE ) ++ return ret; ++#endif //CONFIG_INTEL_WIDI ++ ++ if (_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ //Disable P2P function ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey); ++ _cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey2); ++ reset_ch_sitesurvey_timer_process( padapter ); ++ reset_ch_sitesurvey_timer_process2( padapter ); ++ #ifdef CONFIG_CONCURRENT_MODE ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer); ++ #endif ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE); ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DISABLE); ++ _rtw_memset(&pwdinfo->rx_prov_disc_info, 0x00, sizeof(struct rx_provdisc_req_info)); ++ } ++ ++ //Restore to initial setting. ++ update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode); ++ ++#ifdef CONFIG_INTEL_WIDI ++ rtw_reset_widi_info(padapter); ++#endif //CONFIG_INTEL_WIDI ++ ++ //For WiDi purpose. ++#ifdef CONFIG_IOCTL_CFG80211 ++ pwdinfo->driver_interface = DRIVER_CFG80211; ++#else ++ pwdinfo->driver_interface = DRIVER_WEXT; ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ } ++ ++exit: ++ return ret; ++} ++ ++#endif //CONFIG_P2P +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_pwrctrl.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_pwrctrl.c +new file mode 100644 +index 000000000000..63f865581970 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_pwrctrl.c +@@ -0,0 +1,1538 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_PWRCTRL_C_ ++ ++#include ++#include ++#include ++#include ++ ++ ++#ifdef CONFIG_IPS ++void _ips_enter(_adapter * padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++ pwrpriv->bips_processing = _TRUE; ++ ++ // syn ips_mode with request ++ pwrpriv->ips_mode = pwrpriv->ips_mode_req; ++ ++ pwrpriv->ips_enter_cnts++; ++ DBG_871X("==>ips_enter cnts:%d\n",pwrpriv->ips_enter_cnts); ++ ++ if(rf_off == pwrpriv->change_rfpwrstate) ++ { ++ if(pwrpriv->ips_mode == IPS_LEVEL_2) ++ pwrpriv->bkeepfwalive = _TRUE; ++ ++ rtw_ips_pwr_down(padapter); ++ pwrpriv->rf_pwrstate = rf_off; ++ } ++ pwrpriv->bips_processing = _FALSE; ++ ++} ++ ++void ips_enter(_adapter * padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrpriv->lock); ++ _ips_enter(padapter); ++ _exit_pwrlock(&pwrpriv->lock); ++} ++ ++int _ips_leave(_adapter * padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ int result = _SUCCESS; ++ ++ if((pwrpriv->rf_pwrstate == rf_off) &&(!pwrpriv->bips_processing)) ++ { ++ pwrpriv->bips_processing = _TRUE; ++ pwrpriv->change_rfpwrstate = rf_on; ++ pwrpriv->ips_leave_cnts++; ++ DBG_871X("==>ips_leave cnts:%d\n",pwrpriv->ips_leave_cnts); ++ ++ if ((result = rtw_ips_pwr_up(padapter)) == _SUCCESS) { ++ pwrpriv->rf_pwrstate = rf_on; ++ } ++ ++ DBG_871X("==> ips_leave.....LED(0x%08x)...\n",rtw_read32(padapter,0x4c)); ++ pwrpriv->bips_processing = _FALSE; ++ ++ pwrpriv->bkeepfwalive = _FALSE; ++ } ++ ++ return result; ++} ++ ++int ips_leave(_adapter * padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ int ret; ++ ++ _enter_pwrlock(&pwrpriv->lock); ++ ret = _ips_leave(padapter); ++ _exit_pwrlock(&pwrpriv->lock); ++ ++ return ret; ++} ++#endif /* CONFIG_IPS */ ++ ++#ifdef CONFIG_AUTOSUSPEND ++extern void autosuspend_enter(_adapter* padapter); ++extern int autoresume_enter(_adapter* padapter); ++#endif ++ ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++int rtw_hw_suspend(_adapter *padapter ); ++int rtw_hw_resume(_adapter *padapter); ++#endif ++ ++bool rtw_pwr_unassociated_idle(_adapter *adapter) ++{ ++ _adapter *buddy = adapter->pbuddy_adapter; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &(adapter->wdinfo); ++#ifdef CONFIG_IOCTL_CFG80211 ++ struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &adapter->cfg80211_wdinfo; ++#endif ++#endif ++ ++ bool ret = _FALSE; ++ ++ if (adapter->pwrctrlpriv.ips_deny_time >= rtw_get_current_time()) { ++ //DBG_871X("%s ips_deny_time\n", __func__); ++ goto exit; ++ } ++ ++ if (check_fwstate(pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR) ++ || check_fwstate(pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS) ++ || check_fwstate(pmlmepriv, WIFI_AP_STATE) ++ || check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE) ++ #if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS) ++ || pcfg80211_wdinfo->is_ro_ch ++ #elif defined(CONFIG_P2P) ++ || !rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) ++ #endif ++ ) { ++ goto exit; ++ } ++ ++ /* consider buddy, if exist */ ++ if (buddy) { ++ struct mlme_priv *b_pmlmepriv = &(buddy->mlmepriv); ++ #ifdef CONFIG_P2P ++ struct wifidirect_info *b_pwdinfo = &(buddy->wdinfo); ++ #ifdef CONFIG_IOCTL_CFG80211 ++ struct cfg80211_wifidirect_info *b_pcfg80211_wdinfo = &buddy->cfg80211_wdinfo; ++ #endif ++ #endif ++ ++ if (check_fwstate(b_pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR) ++ || check_fwstate(b_pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS) ++ || check_fwstate(b_pmlmepriv, WIFI_AP_STATE) ++ || check_fwstate(b_pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE) ++ #if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS) ++ || b_pcfg80211_wdinfo->is_ro_ch ++ #elif defined(CONFIG_P2P) ++ || !rtw_p2p_chk_state(b_pwdinfo, P2P_STATE_NONE) ++ #endif ++ ) { ++ goto exit; ++ } ++ } ++ ++#ifdef CONFIG_INTEL_PROXIM ++ if(adapter->proximity.proxim_on==_TRUE){ ++ return; ++ } ++#endif ++ ++ ret = _TRUE; ++ ++exit: ++ return ret; ++} ++ ++#if defined (PLATFORM_LINUX)||defined (PLATFORM_FREEBSD) ++void rtw_ps_processor(_adapter*padapter) ++{ ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++#endif //CONFIG_P2P ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++ rt_rf_power_state rfpwrstate; ++#endif //SUPPORT_HW_RFOFF_DETECTED ++ ++ pwrpriv->ps_processing = _TRUE; ++ ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++ if(pwrpriv->bips_processing == _TRUE) ++ goto exit; ++ ++ //DBG_871X("==> fw report state(0x%x)\n",rtw_read8(padapter,0x1ca)); ++ if(padapter->pwrctrlpriv.bHWPwrPindetect) ++ { ++ #ifdef CONFIG_AUTOSUSPEND ++ if(padapter->registrypriv.usbss_enable) ++ { ++ if(pwrpriv->rf_pwrstate == rf_on) ++ { ++ if(padapter->net_closed == _TRUE) ++ pwrpriv->ps_flag = _TRUE; ++ ++ rfpwrstate = RfOnOffDetect(padapter); ++ DBG_871X("@@@@- #1 %s==> rfstate:%s \n",__FUNCTION__,(rfpwrstate==rf_on)?"rf_on":"rf_off"); ++ if(rfpwrstate!= pwrpriv->rf_pwrstate) ++ { ++ if(rfpwrstate == rf_off) ++ { ++ pwrpriv->change_rfpwrstate = rf_off; ++ ++ pwrpriv->bkeepfwalive = _TRUE; ++ pwrpriv->brfoffbyhw = _TRUE; ++ ++ autosuspend_enter(padapter); ++ } ++ } ++ } ++ } ++ else ++ #endif //CONFIG_AUTOSUSPEND ++ { ++ rfpwrstate = RfOnOffDetect(padapter); ++ DBG_871X("@@@@- #2 %s==> rfstate:%s \n",__FUNCTION__,(rfpwrstate==rf_on)?"rf_on":"rf_off"); ++ ++ if(rfpwrstate!= pwrpriv->rf_pwrstate) ++ { ++ if(rfpwrstate == rf_off) ++ { ++ pwrpriv->change_rfpwrstate = rf_off; ++ pwrpriv->brfoffbyhw = _TRUE; ++ padapter->bCardDisableWOHSM = _TRUE; ++ rtw_hw_suspend(padapter ); ++ } ++ else ++ { ++ pwrpriv->change_rfpwrstate = rf_on; ++ rtw_hw_resume(padapter ); ++ } ++ DBG_871X("current rf_pwrstate(%s)\n",(pwrpriv->rf_pwrstate == rf_off)?"rf_off":"rf_on"); ++ } ++ } ++ pwrpriv->pwr_state_check_cnts ++; ++ } ++#endif //SUPPORT_HW_RFOFF_DETECTED ++ ++ if (pwrpriv->ips_mode_req == IPS_NONE ++ #ifdef CONFIG_CONCURRENT_MODE ++ || padapter->pbuddy_adapter->pwrctrlpriv.ips_mode_req == IPS_NONE ++ #endif ++ ) ++ goto exit; ++ ++ if (rtw_pwr_unassociated_idle(padapter) == _FALSE) ++ goto exit; ++ ++ if((pwrpriv->rf_pwrstate == rf_on) && ((pwrpriv->pwr_state_check_cnts%4)==0)) ++ { ++ DBG_871X("==>%s .fw_state(%x)\n",__FUNCTION__,get_fwstate(pmlmepriv)); ++ pwrpriv->change_rfpwrstate = rf_off; ++ ++ #ifdef CONFIG_AUTOSUSPEND ++ if(padapter->registrypriv.usbss_enable) ++ { ++ if(pwrpriv->bHWPwrPindetect) ++ pwrpriv->bkeepfwalive = _TRUE; ++ ++ if(padapter->net_closed == _TRUE) ++ pwrpriv->ps_flag = _TRUE; ++ ++ padapter->bCardDisableWOHSM = _TRUE; ++ autosuspend_enter(padapter); ++ } ++ else if(pwrpriv->bHWPwrPindetect) ++ { ++ } ++ else ++ #endif //CONFIG_AUTOSUSPEND ++ { ++ #ifdef CONFIG_IPS ++ ips_enter(padapter); ++ #endif ++ } ++ } ++exit: ++ rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv); ++ pwrpriv->ps_processing = _FALSE; ++ return; ++} ++ ++void pwr_state_check_handler(void *FunctionContext); ++void pwr_state_check_handler(void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ rtw_ps_cmd(padapter); ++} ++#endif ++ ++ ++#ifdef CONFIG_LPS ++/* ++ * ++ * Parameters ++ * padapter ++ * pslv power state level, only could be PS_STATE_S0 ~ PS_STATE_S4 ++ * ++ */ ++void rtw_set_rpwm(PADAPTER padapter, u8 pslv) ++{ ++ u8 rpwm; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++_func_enter_; ++ ++ pslv = PS_STATE(pslv); ++ ++ if (pwrpriv->rpwm == pslv) { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_,_drv_err_, ++ ("%s: Already set rpwm[0x%02x]!\n", __FUNCTION__, pslv)); ++ return; ++ } ++ ++ if ((padapter->bDriverStopped == _TRUE) || ++ (padapter->bSurpriseRemoved == _TRUE)) { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_, ++ ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)\n", ++ __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ return; ++ } ++ ++ rpwm = pslv | pwrpriv->tog; ++#ifdef CONFIG_LPS_LCLK ++ if ((pwrpriv->cpwm < PS_STATE_S2) && (pslv >= PS_STATE_S2)) ++ rpwm |= PS_ACK; ++#endif ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_set_rpwm: rpwm=0x%02x cpwm=0x%02x\n", rpwm, pwrpriv->cpwm)); ++ ++ pwrpriv->rpwm = pslv; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&rpwm)); ++ ++ pwrpriv->tog += 0x80; ++ ++ if (!(rpwm & PS_ACK)) pwrpriv->cpwm = pslv; ++ ++_func_exit_; ++} ++ ++u8 PS_RDY_CHECK(_adapter * padapter); ++u8 PS_RDY_CHECK(_adapter * padapter) ++{ ++ u32 curr_time, delta_time; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ curr_time = rtw_get_current_time(); ++ ++ delta_time = curr_time -pwrpriv->DelayLPSLastTimeStamp; ++ ++ if(delta_time < LPS_DELAY_TIME) ++ { ++ return _FALSE; ++ } ++ ++ if ((check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) || ++ (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_UNDER_WPS) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ) ++ return _FALSE; ++ ++ if(_TRUE == pwrpriv->bInSuspend ) ++ return _FALSE; ++ ++ if( (padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) && (padapter->securitypriv.binstallGrpkey == _FALSE) ) ++ { ++ DBG_871X("Group handshake still in progress !!!\n"); ++ return _FALSE; ++ } ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if (!rtw_cfg80211_pwr_mgmt(padapter)) ++ return _FALSE; ++#endif ++ ++ return _TRUE; ++} ++ ++void rtw_set_ps_mode(PADAPTER padapter, u8 ps_mode, u8 smart_ps) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++#endif //CONFIG_P2P ++#ifdef CONFIG_TDLS ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ _irqL irqL; ++ int i, j; ++ _list *plist, *phead; ++ struct sta_info *ptdls_sta; ++#endif //CONFIG_TDLS ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("%s: PowerMode=%d Smart_PS=%d\n", ++ __FUNCTION__, ps_mode, smart_ps)); ++ ++ if(ps_mode > PM_Card_Disable) { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_,_drv_err_,("ps_mode:%d error\n", ps_mode)); ++ return; ++ } ++ ++ if((pwrpriv->pwr_mode == ps_mode) && ++ (pwrpriv->smart_ps == smart_ps)){ ++ return; ++ } ++ ++ //if(pwrpriv->pwr_mode == PS_MODE_ACTIVE) ++ if(ps_mode == PS_MODE_ACTIVE) ++ { ++#ifdef CONFIG_P2P_PS ++ if(pwdinfo->opp_ps == 0) ++#endif // CONFIG_P2P_PS ++ { ++#ifdef CONFIG_LPS_LCLK ++ _enter_pwrlock(&pwrpriv->lock); ++#endif ++ DBG_871X("rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..\n"); ++ ++#ifdef CONFIG_TDLS ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(i=0; i< NUM_STA; i++) ++ { ++ phead = &(pstapriv->sta_hash[i]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ ptdls_sta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ if( ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE ) ++ issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0); ++ plist = get_next(plist); ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++#endif //CONFIG_TDLS ++ ++ pwrpriv->smart_ps = smart_ps; ++ pwrpriv->pwr_mode = ps_mode; ++ ++ rtw_set_rpwm(padapter, PS_STATE_S4); ++#ifdef CONFIG_LPS_LCLK ++{ ++ u32 n = 0; ++ while (pwrpriv->cpwm != PS_STATE_S4) { ++ n++; ++ if (n == 10000) break; ++ if (padapter->bSurpriseRemoved == _TRUE) break; ++ rtw_msleep_os(1); ++ } ++ if (n == 10000) ++ printk(KERN_ERR "%s: wait CPWM to S4 too long! cpwm=0x%02x\n", __func__, pwrpriv->cpwm); ++} ++#endif ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode)); ++ pwrpriv->bFwCurrentInPSMode = _FALSE; ++#ifdef CONFIG_LPS_LCLK ++ _exit_pwrlock(&pwrpriv->lock); ++#endif ++ } ++ } ++ else ++ { ++ if(PS_RDY_CHECK(padapter)) ++ { ++#ifdef CONFIG_LPS_LCLK ++ _enter_pwrlock(&pwrpriv->lock); ++#endif ++ DBG_871X("rtw_set_ps_mode(): Enter 802.11 power save mode...\n"); ++ ++#ifdef CONFIG_TDLS ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(i=0; i< NUM_STA; i++) ++ { ++ phead = &(pstapriv->sta_hash[i]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ ptdls_sta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ if( ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE ) ++ issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 1); ++ plist = get_next(plist); ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++#endif //CONFIG_TDLS ++ ++ pwrpriv->smart_ps = smart_ps; ++ pwrpriv->pwr_mode = ps_mode; ++ pwrpriv->bFwCurrentInPSMode = _TRUE; ++ rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode)); ++#ifdef CONFIG_P2P_PS ++ // Set CTWindow after LPS ++ if(pwdinfo->opp_ps == 1) ++ p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 0); ++#endif // CONFIG_P2P_PS ++#ifdef CONFIG_LPS_LCLK ++ if (pwrpriv->alives == 0) ++ rtw_set_rpwm(padapter, PS_STATE_S0); ++#else ++ rtw_set_rpwm(padapter, PS_STATE_S2); ++#endif ++#ifdef CONFIG_LPS_LCLK ++ _exit_pwrlock(&pwrpriv->lock); ++#endif ++ } ++ //else ++ //{ ++ // pwrpriv->pwr_mode = PS_MODE_ACTIVE; ++ //} ++ } ++ ++_func_exit_; ++} ++ ++ ++// ++// Description: ++// Enter the leisure power save mode. ++// ++void LPS_Enter(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _adapter *buddy = padapter->pbuddy_adapter; ++ ++_func_enter_; ++ ++// DBG_871X("+LeisurePSEnter\n"); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->iface_type != IFACE_PORT0) ++ return; /* Skip power saving for concurrent mode port 1*/ ++ ++ /* consider buddy, if exist */ ++ if (buddy) { ++ struct mlme_priv *b_pmlmepriv = &(buddy->mlmepriv); ++ #ifdef CONFIG_P2P ++ struct wifidirect_info *b_pwdinfo = &(buddy->wdinfo); ++ #ifdef CONFIG_IOCTL_CFG80211 ++ struct cfg80211_wifidirect_info *b_pcfg80211_wdinfo = &buddy->cfg80211_wdinfo; ++ #endif ++ #endif ++ ++ if (check_fwstate(b_pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR) ++ || check_fwstate(b_pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS) ++ || check_fwstate(b_pmlmepriv, WIFI_AP_STATE) ++ || check_fwstate(b_pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE) ++ #if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS) ++ || b_pcfg80211_wdinfo->is_ro_ch ++ #elif defined(CONFIG_P2P) ++ || !rtw_p2p_chk_state(b_pwdinfo, P2P_STATE_NONE) ++ #endif ++ || rtw_is_scan_deny(buddy) ++ ) { ++ return; ++ } ++ } ++#endif ++ ++#ifdef CONFIG_INTEL_PROXIM ++ if(padapter->proximity.proxim_on==_TRUE){ ++ return; ++ } ++#endif ++ if ( (check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) || ++ (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ) ++ return; ++ ++ if(_TRUE == pwrpriv->bInSuspend ) ++ return ; ++ ++ if (pwrpriv->bLeisurePs) ++ { ++ // Idle for a while if we connect to AP a while ago. ++ if(pwrpriv->LpsIdleCount >= 2) // 4 Sec ++ { ++ if(pwrpriv->pwr_mode == PS_MODE_ACTIVE) ++ { ++ rtw_set_ps_mode(padapter, pwrpriv->power_mgnt, 2); ++ } ++ } ++ else ++ pwrpriv->LpsIdleCount++; ++ } ++ ++// DBG_871X("-LeisurePSEnter\n"); ++ ++_func_exit_; ++} ++ ++ ++// ++// Description: ++// Leave the leisure power save mode. ++// ++void LPS_Leave(PADAPTER padapter) ++{ ++#define LPS_LEAVE_TIMEOUT_MS 100 ++ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ u32 start_time; ++ BOOLEAN bAwake = _FALSE; ++ ++_func_enter_; ++ ++// DBG_871X("+LeisurePSLeave\n"); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->iface_type != IFACE_PORT0) ++ return; /* Skip power saving for concurrent mode port 1*/ ++#endif ++ ++ if (pwrpriv->bLeisurePs) ++ { ++ if(pwrpriv->pwr_mode != PS_MODE_ACTIVE) ++ { ++ rtw_set_ps_mode(padapter, PS_MODE_ACTIVE, 0); ++ ++ if(pwrpriv->pwr_mode == PS_MODE_ACTIVE) ++ { ++ start_time = rtw_get_current_time(); ++ while(1) ++ { ++ rtw_hal_get_hwreg(padapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bAwake)); ++ ++ if(bAwake || padapter->bSurpriseRemoved) ++ break; ++ ++ if(rtw_get_passing_time_ms(start_time)>LPS_LEAVE_TIMEOUT_MS) ++ { ++ DBG_871X("Wait for FW LPS leave more than %u ms!!!\n", LPS_LEAVE_TIMEOUT_MS); ++ break; ++ } ++ rtw_usleep_os(100); ++ } ++ } ++ } ++ } ++ ++ ++// DBG_871X("-LeisurePSLeave\n"); ++ ++_func_exit_; ++} ++ ++#endif ++ ++// ++// Description: Leave all power save mode: LPS, FwLPS, IPS if needed. ++// Move code to function by tynli. 2010.03.26. ++// ++void LeaveAllPowerSaveMode(IN PADAPTER Adapter) ++{ ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ ++_func_enter_; ++ ++ //DBG_871X("%s.....\n",__FUNCTION__); ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { //connect ++#ifdef CONFIG_P2P_PS ++ p2p_ps_wk_cmd(Adapter, P2P_PS_DISABLE, 0); ++#endif // CONFIG_P2P_PS ++#ifdef CONFIG_LPS ++ //DBG_871X("==> leave LPS.......\n"); ++ LPS_Leave(Adapter); ++#endif ++ } ++ else ++ { ++ if(Adapter->pwrctrlpriv.rf_pwrstate== rf_off) ++ { ++ #ifdef CONFIG_AUTOSUSPEND ++ if(Adapter->registrypriv.usbss_enable) ++ { ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ usb_disable_autosuspend(adapter_to_dvobj(Adapter)->pusbdev); ++ #elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34)) ++ adapter_to_dvobj(Adapter)->pusbdev->autosuspend_disabled = Adapter->bDisableAutosuspend;//autosuspend disabled by the user ++ #endif ++ } ++ else ++ #endif ++ { ++ /* ++ #ifdef CONFIG_IPS ++ if(_FALSE == ips_leave(Adapter)) ++ { ++ DBG_871X("======> ips_leave fail.............\n"); ++ } ++ #endif ++ */ ++ } ++ } ++ } ++ ++_func_exit_; ++} ++ ++#ifdef CONFIG_LPS_LCLK ++/* ++ * Caller:ISR handler... ++ * ++ * This will be called when CPWM interrupt is up. ++ * ++ * using to update cpwn of drv; and drv willl make a decision to up or down pwr level ++ */ ++void cpwm_int_hdl( ++ PADAPTER padapter, ++ struct reportpwrstate_parm *preportpwrstate) ++{ ++ struct pwrctrl_priv *pwrpriv; ++ ++ ++_func_enter_; ++ ++ pwrpriv = &padapter->pwrctrlpriv; ++#if 0 ++ if (pwrpriv->cpwm_tog == (preportpwrstate->state & PS_TOGGLE)) { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_, ++ ("cpwm_int_hdl: tog(old)=0x%02x cpwm(new)=0x%02x toggle bit didn't change!?\n", ++ pwrpriv->cpwm_tog, preportpwrstate->state)); ++ goto exit; ++ } ++#endif ++// _enter_pwrlock(&pwrpriv->lock); ++ ++ pwrpriv->cpwm = PS_STATE(preportpwrstate->state); ++ pwrpriv->cpwm_tog = preportpwrstate->state & PS_TOGGLE; ++ ++ if (pwrpriv->cpwm >= PS_STATE_S2) { ++ if (pwrpriv->alives & CMD_ALIVE) ++ _rtw_up_sema(&padapter->cmdpriv.cmd_queue_sema); ++ ++ if (pwrpriv->alives & XMIT_ALIVE) ++ _rtw_up_sema(&padapter->xmitpriv.xmit_sema); ++ } ++ ++// _exit_pwrlock(&pwrpriv->lock); ++ ++exit: ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("cpwm_int_hdl: cpwm=0x%02x\n", pwrpriv->cpwm)); ++ ++_func_exit_; ++} ++ ++__inline static void register_task_alive(struct pwrctrl_priv *pwrctrl, u32 tag) ++{ ++ pwrctrl->alives |= tag; ++} ++ ++__inline static void unregister_task_alive(struct pwrctrl_priv *pwrctrl, u32 tag) ++{ ++ pwrctrl->alives &= ~tag; ++} ++ ++/* ++ * Caller: rtw_xmit_thread ++ * ++ * Check if the fw_pwrstate is okay for xmit. ++ * If not (cpwm is less than S3), then the sub-routine ++ * will raise the cpwm to be greater than or equal to S3. ++ * ++ * Calling Context: Passive ++ * ++ * Return Value: ++ * _SUCCESS rtw_xmit_thread can write fifo/txcmd afterwards. ++ * _FAIL rtw_xmit_thread can not do anything. ++ */ ++s32 rtw_register_tx_alive(PADAPTER padapter) ++{ ++ s32 res; ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ res = _SUCCESS; ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ register_task_alive(pwrctrl, XMIT_ALIVE); ++ ++ if (pwrctrl->bFwCurrentInPSMode == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_, ++ ("rtw_register_tx_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ if (pwrctrl->cpwm < PS_STATE_S2) { ++ if (pwrctrl->rpwm < PS_STATE_S2) ++ rtw_set_rpwm(padapter, PS_STATE_S2); ++ res = _FAIL; ++ } ++ } ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++/* ++ * Caller: rtw_cmd_thread ++ * ++ * Check if the fw_pwrstate is okay for issuing cmd. ++ * If not (cpwm should be is less than S2), then the sub-routine ++ * will raise the cpwm to be greater than or equal to S2. ++ * ++ * Calling Context: Passive ++ * ++ * Return Value: ++ * _SUCCESS rtw_cmd_thread can issue cmds to firmware afterwards. ++ * _FAIL rtw_cmd_thread can not do anything. ++ */ ++s32 rtw_register_cmd_alive(PADAPTER padapter) ++{ ++ s32 res; ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ res = _SUCCESS; ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ register_task_alive(pwrctrl, CMD_ALIVE); ++ ++ if (pwrctrl->bFwCurrentInPSMode == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_register_cmd_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ if (pwrctrl->cpwm < PS_STATE_S2) { ++ if (pwrctrl->rpwm < PS_STATE_S2) ++ rtw_set_rpwm(padapter, PS_STATE_S2); ++ res = _FAIL; ++ } ++ } ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++/* ++ * Caller: rx_isr ++ * ++ * Calling Context: Dispatch/ISR ++ * ++ * Return Value: ++ * _SUCCESS ++ * _FAIL ++ */ ++s32 rtw_register_rx_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ register_task_alive(pwrctrl, RECV_ALIVE); ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_register_rx_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++/* ++ * Caller: evt_isr or evt_thread ++ * ++ * Calling Context: Dispatch/ISR or Passive ++ * ++ * Return Value: ++ * _SUCCESS ++ * _FAIL ++ */ ++s32 rtw_register_evt_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ register_task_alive(pwrctrl, EVT_ALIVE); ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_register_evt_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++/* ++ * Caller: ISR ++ * ++ * If ISR's txdone, ++ * No more pkts for TX, ++ * Then driver shall call this fun. to power down firmware again. ++ */ ++void rtw_unregister_tx_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ unregister_task_alive(pwrctrl, XMIT_ALIVE); ++ ++ if ((pwrctrl->pwr_mode != PS_MODE_ACTIVE) && ++ (pwrctrl->bFwCurrentInPSMode == _TRUE)) ++ { ++ if ((pwrctrl->alives == 0) && ++ (pwrctrl->cpwm > PS_STATE_S0)) ++ { ++ rtw_set_rpwm(padapter, PS_STATE_S0); ++ } ++ ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_unregister_tx_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ } ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++} ++ ++/* ++ * Caller: ISR ++ * ++ * If all commands have been done, ++ * and no more command to do, ++ * then driver shall call this fun. to power down firmware again. ++ */ ++void rtw_unregister_cmd_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ unregister_task_alive(pwrctrl, CMD_ALIVE); ++ ++ if ((pwrctrl->pwr_mode != PS_MODE_ACTIVE) && ++ (pwrctrl->bFwCurrentInPSMode == _TRUE)) ++ { ++ if ((pwrctrl->alives == 0) && ++ (pwrctrl->cpwm > PS_STATE_S0)) ++ { ++ rtw_set_rpwm(padapter, PS_STATE_S0); ++ } ++ ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_unregister_cmd_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ } ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++} ++ ++/* ++ * Caller: ISR ++ */ ++void rtw_unregister_rx_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ _enter_pwrlock(&pwrctrl->lock); ++ ++ unregister_task_alive(pwrctrl, RECV_ALIVE); ++ ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_unregister_rx_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++} ++ ++void rtw_unregister_evt_alive(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrl; ++ ++_func_enter_; ++ ++ pwrctrl = &padapter->pwrctrlpriv; ++ ++ unregister_task_alive(pwrctrl, EVT_ALIVE); ++ ++ RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_, ++ ("rtw_unregister_evt_alive: cpwm=0x%02x alives=0x%08x\n", ++ pwrctrl->cpwm, pwrctrl->alives)); ++ ++ _exit_pwrlock(&pwrctrl->lock); ++ ++_func_exit_; ++} ++#endif /* CONFIG_LPS_LCLK */ ++ ++#ifdef CONFIG_RESUME_IN_WORKQUEUE ++static void resume_workitem_callback(struct work_struct *work); ++#endif //CONFIG_RESUME_IN_WORKQUEUE ++ ++void rtw_init_pwrctrl_priv(PADAPTER padapter) ++{ ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++_func_enter_; ++ ++#ifdef PLATFORM_WINDOWS ++ pwrctrlpriv->pnp_current_pwr_state=NdisDeviceStateD0; ++#endif ++ ++ _init_pwrlock(&pwrctrlpriv->lock); ++ pwrctrlpriv->rf_pwrstate = rf_on; ++ pwrctrlpriv->ips_enter_cnts=0; ++ pwrctrlpriv->ips_leave_cnts=0; ++ ++ pwrctrlpriv->ips_mode = padapter->registrypriv.ips_mode; ++ pwrctrlpriv->ips_mode_req = padapter->registrypriv.ips_mode; ++ ++ pwrctrlpriv->pwr_state_check_interval = RTW_PWR_STATE_CHK_INTERVAL; ++ pwrctrlpriv->pwr_state_check_cnts = 0; ++ pwrctrlpriv->bInternalAutoSuspend = _FALSE; ++ pwrctrlpriv->bInSuspend = _FALSE; ++ pwrctrlpriv->bkeepfwalive = _FALSE; ++ ++#ifdef CONFIG_AUTOSUSPEND ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++ pwrctrlpriv->pwr_state_check_interval = (pwrctrlpriv->bHWPwrPindetect) ?1000:2000; ++#endif ++#endif ++ ++ pwrctrlpriv->LpsIdleCount = 0; ++ //pwrctrlpriv->FWCtrlPSMode =padapter->registrypriv.power_mgnt;// PS_MODE_MIN; ++ pwrctrlpriv->power_mgnt =padapter->registrypriv.power_mgnt;// PS_MODE_MIN; ++ pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?_TRUE:_FALSE; ++ ++ pwrctrlpriv->bFwCurrentInPSMode = _FALSE; ++ ++ pwrctrlpriv->cpwm = PS_STATE_S4; ++ ++ pwrctrlpriv->pwr_mode = PS_MODE_ACTIVE; ++ ++ ++ pwrctrlpriv->smart_ps = 0; ++ ++ pwrctrlpriv->tog = 0x80; ++ ++#ifdef PLATFORM_LINUX ++ _init_timer(&(pwrctrlpriv->pwr_state_check_timer), padapter->pnetdev, pwr_state_check_handler, (u8 *)padapter); ++#endif ++ ++ #ifdef CONFIG_RESUME_IN_WORKQUEUE ++ _init_workitem(&pwrctrlpriv->resume_work, resume_workitem_callback, NULL); ++ pwrctrlpriv->rtw_workqueue = create_singlethread_workqueue("rtw_workqueue"); ++ #endif //CONFIG_RESUME_IN_WORKQUEUE ++ ++ #if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER) ++ pwrctrlpriv->early_suspend.suspend = NULL; ++ rtw_register_early_suspend(pwrctrlpriv); ++ #endif //CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER ++ ++ ++_func_exit_; ++ ++} ++ ++ ++void rtw_free_pwrctrl_priv(PADAPTER adapter) ++{ ++ struct pwrctrl_priv *pwrctrlpriv = &adapter->pwrctrlpriv; ++ ++_func_enter_; ++ ++ //_rtw_memset((unsigned char *)pwrctrlpriv, 0, sizeof(struct pwrctrl_priv)); ++ ++ ++ #ifdef CONFIG_RESUME_IN_WORKQUEUE ++ if (pwrctrlpriv->rtw_workqueue) { ++ flush_workqueue(pwrctrlpriv->rtw_workqueue); ++ destroy_workqueue(pwrctrlpriv->rtw_workqueue); ++ } ++ #endif ++ ++ ++ #if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER) ++ rtw_unregister_early_suspend(pwrctrlpriv); ++ #endif //CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER ++ ++ _free_pwrlock(&pwrctrlpriv->lock); ++ ++_func_exit_; ++} ++ ++#ifdef CONFIG_RESUME_IN_WORKQUEUE ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++extern int rtw_resume_process(_adapter *padapter); ++#endif ++static void resume_workitem_callback(struct work_struct *work) ++{ ++ struct pwrctrl_priv *pwrpriv = container_of(work, struct pwrctrl_priv, resume_work); ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++ DBG_871X("%s\n",__FUNCTION__); ++ ++ #if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++ rtw_resume_process(adapter); ++ #endif ++ ++} ++ ++void rtw_resume_in_workqueue(struct pwrctrl_priv *pwrpriv) ++{ ++ // accquire system's suspend lock preventing from falliing asleep while resume in workqueue ++ rtw_lock_suspend(); ++ ++ #if 1 ++ queue_work(pwrpriv->rtw_workqueue, &pwrpriv->resume_work); ++ #else ++ _set_workitem(&pwrpriv->resume_work); ++ #endif ++} ++#endif //CONFIG_RESUME_IN_WORKQUEUE ++ ++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER) ++inline bool rtw_is_earlysuspend_registered(struct pwrctrl_priv *pwrpriv) ++{ ++ return (pwrpriv->early_suspend.suspend) ? _TRUE : _FALSE; ++} ++ ++inline bool rtw_is_do_late_resume(struct pwrctrl_priv *pwrpriv) ++{ ++ return (pwrpriv->do_late_resume) ? _TRUE : _FALSE; ++} ++ ++inline void rtw_set_do_late_resume(struct pwrctrl_priv *pwrpriv, bool enable) ++{ ++ pwrpriv->do_late_resume = enable; ++} ++#endif ++ ++#ifdef CONFIG_HAS_EARLYSUSPEND ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++extern int rtw_resume_process(_adapter *padapter); ++#endif ++static void rtw_early_suspend(struct early_suspend *h) ++{ ++ struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend); ++ DBG_871X("%s\n",__FUNCTION__); ++ ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++} ++ ++static void rtw_late_resume(struct early_suspend *h) ++{ ++ struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend); ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++ DBG_871X("%s\n",__FUNCTION__); ++ if(pwrpriv->do_late_resume) { ++ #if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++ rtw_resume_process(adapter); ++ #endif ++ } ++} ++ ++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv) ++{ ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++#if defined(CONFIG_CONCURRENT_MODE) ++ if (adapter->adapter_type != PRIMARY_ADAPTER) ++ return; ++#endif ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ //jeff: set the early suspend level before blank screen, so we wll do late resume after scree is lit ++ pwrpriv->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN - 20; ++ pwrpriv->early_suspend.suspend = rtw_early_suspend; ++ pwrpriv->early_suspend.resume = rtw_late_resume; ++ register_early_suspend(&pwrpriv->early_suspend); ++ ++ ++} ++ ++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv) ++{ ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++#if defined(CONFIG_CONCURRENT_MODE) ++ if (adapter->adapter_type != PRIMARY_ADAPTER) ++ return; ++#endif ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++ ++ if (pwrpriv->early_suspend.suspend) ++ unregister_early_suspend(&pwrpriv->early_suspend); ++ ++ pwrpriv->early_suspend.suspend = NULL; ++ pwrpriv->early_suspend.resume = NULL; ++} ++#endif //CONFIG_HAS_EARLYSUSPEND ++ ++#ifdef CONFIG_ANDROID_POWER ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++extern int rtw_resume_process(PADAPTER padapter); ++#endif ++static void rtw_early_suspend(android_early_suspend_t *h) ++{ ++ struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend); ++ DBG_871X("%s\n",__FUNCTION__); ++ ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++} ++ ++static void rtw_late_resume(android_early_suspend_t *h) ++{ ++ struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend); ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++ DBG_871X("%s\n",__FUNCTION__); ++ if(pwrpriv->do_late_resume) { ++ #if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++ rtw_resume_process(adapter); ++ #endif ++ } ++} ++ ++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv) ++{ ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++#if defined(CONFIG_CONCURRENT_MODE) ++ if (adapter->adapter_type != PRIMARY_ADAPTER) ++ return; ++#endif ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ //jeff: set the early suspend level before blank screen, so we wll do late resume after scree is lit ++ pwrpriv->early_suspend.level = ANDROID_EARLY_SUSPEND_LEVEL_BLANK_SCREEN - 20; ++ pwrpriv->early_suspend.suspend = rtw_early_suspend; ++ pwrpriv->early_suspend.resume = rtw_late_resume; ++ android_register_early_suspend(&pwrpriv->early_suspend); ++} ++ ++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv) ++{ ++ _adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv); ++ ++#if defined(CONFIG_CONCURRENT_MODE) ++ if (adapter->adapter_type != PRIMARY_ADAPTER) ++ return; ++#endif ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ rtw_set_do_late_resume(pwrpriv, _FALSE); ++ ++ if (pwrpriv->early_suspend.suspend) ++ android_unregister_early_suspend(&pwrpriv->early_suspend); ++ ++ pwrpriv->early_suspend.suspend = NULL; ++ pwrpriv->early_suspend.resume = NULL; ++} ++#endif //CONFIG_ANDROID_POWER ++ ++u8 rtw_interface_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id,u8* val) ++{ ++ u8 bResult = _TRUE; ++ ++ rtw_hal_intf_ps_func(padapter,efunc_id,val); ++ ++ return bResult; ++} ++ ++ ++inline void rtw_set_ips_deny(_adapter *padapter, u32 ms) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ms); ++} ++ ++/* ++* rtw_pwr_wakeup - Wake the NIC up from: 1)IPS. 2)USB autosuspend ++* @adapter: pointer to _adapter structure ++* @ips_deffer_ms: the ms wiil prevent from falling into IPS after wakeup ++* Return _SUCCESS or _FAIL ++*/ ++int _rtw_pwr_wakeup(_adapter *padapter, u32 ips_deffer_ms, const char *caller) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ int ret = _SUCCESS; ++ u32 start = rtw_get_current_time(); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->pbuddy_adapter) ++ LeaveAllPowerSaveMode(padapter->pbuddy_adapter); ++ ++ if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){ ++ padapter = padapter->pbuddy_adapter; ++ pwrpriv = &padapter->pwrctrlpriv; ++ pmlmepriv = &padapter->mlmepriv; ++ } ++#endif ++ ++ if (pwrpriv->ips_deny_time < rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms)) ++ pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms); ++ ++ if (pwrpriv->ps_processing) { ++ DBG_871X("%s wait ps_processing...\n", __func__); ++ while (pwrpriv->ps_processing && rtw_get_passing_time_ms(start) <= 3000) ++ rtw_msleep_os(10); ++ if (pwrpriv->ps_processing) ++ DBG_871X("%s wait ps_processing timeout\n", __func__); ++ else ++ DBG_871X("%s wait ps_processing done\n", __func__); ++ } ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++ if (rtw_hal_sreset_inprogress(padapter)) { ++ DBG_871X("%s wait sreset_inprogress...\n", __func__); ++ while (rtw_hal_sreset_inprogress(padapter) && rtw_get_passing_time_ms(start) <= 4000) ++ rtw_msleep_os(10); ++ if (rtw_hal_sreset_inprogress(padapter)) ++ DBG_871X("%s wait sreset_inprogress timeout\n", __func__); ++ else ++ DBG_871X("%s wait sreset_inprogress done\n", __func__); ++ } ++#endif ++ ++ if (pwrpriv->bInternalAutoSuspend == _FALSE && pwrpriv->bInSuspend) { ++ DBG_871X("%s wait bInSuspend...\n", __func__); ++ while (pwrpriv->bInSuspend ++ && ((rtw_get_passing_time_ms(start) <= 3000 && !rtw_is_do_late_resume(pwrpriv)) ++ || (rtw_get_passing_time_ms(start) <= 500 && rtw_is_do_late_resume(pwrpriv))) ++ ) { ++ rtw_msleep_os(10); ++ } ++ if (pwrpriv->bInSuspend) ++ DBG_871X("%s wait bInSuspend timeout\n", __func__); ++ else ++ DBG_871X("%s wait bInSuspend done\n", __func__); ++ } ++ ++ //System suspend is not allowed to wakeup ++ if((pwrpriv->bInternalAutoSuspend == _FALSE) && (_TRUE == pwrpriv->bInSuspend )){ ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ //block??? ++ if((pwrpriv->bInternalAutoSuspend == _TRUE) && (padapter->net_closed == _TRUE)) { ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ //I think this should be check in IPS, LPS, autosuspend functions... ++ if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ ret = _SUCCESS; ++ goto exit; ++ } ++ ++ if(rf_off == pwrpriv->rf_pwrstate ) ++ { ++#ifdef CONFIG_USB_HCI ++#ifdef CONFIG_AUTOSUSPEND ++ if(pwrpriv->brfoffbyhw==_TRUE) ++ { ++ DBG_8192C("hw still in rf_off state ...........\n"); ++ ret = _FAIL; ++ goto exit; ++ } ++ else if(padapter->registrypriv.usbss_enable) ++ { ++ DBG_8192C("%s call autoresume_enter....\n",__FUNCTION__); ++ if(_FAIL == autoresume_enter(padapter)) ++ { ++ DBG_8192C("======> autoresume fail.............\n"); ++ ret = _FAIL; ++ goto exit; ++ } ++ } ++ else ++#endif ++#endif ++ { ++#ifdef CONFIG_IPS ++ DBG_8192C("%s call ips_leave....\n",__FUNCTION__); ++ if(_FAIL == ips_leave(padapter)) ++ { ++ DBG_8192C("======> ips_leave fail.............\n"); ++ ret = _FAIL; ++ goto exit; ++ } ++#endif ++ } ++ } ++ ++ //TODO: the following checking need to be merged... ++ if(padapter->bDriverStopped ++ || !padapter->bup ++ || !padapter->hw_init_completed ++ ){ ++ DBG_8192C("%s: bDriverStopped=%d, bup=%d, hw_init_completed=%u\n" ++ , caller ++ , padapter->bDriverStopped ++ , padapter->bup ++ , padapter->hw_init_completed); ++ ret= _FALSE; ++ goto exit; ++ } ++ ++exit: ++ if (pwrpriv->ips_deny_time < rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms)) ++ pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms); ++ return ret; ++ ++} ++ ++int rtw_pm_set_lps(_adapter *padapter, u8 mode) ++{ ++ int ret = 0; ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++ if ( mode < PS_MODE_NUM ) ++ { ++ if(pwrctrlpriv->power_mgnt !=mode) ++ { ++ if(PS_MODE_ACTIVE == mode) ++ { ++ LeaveAllPowerSaveMode(padapter); ++ } ++ else ++ { ++ pwrctrlpriv->LpsIdleCount = 2; ++ } ++ pwrctrlpriv->power_mgnt = mode; ++ pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?_TRUE:_FALSE; ++ } ++ } ++ else ++ { ++ ret = -EINVAL; ++ } ++ ++ return ret; ++} ++ ++int rtw_pm_set_ips(_adapter *padapter, u8 mode) ++{ ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++ if( mode == IPS_NORMAL || mode == IPS_LEVEL_2 ) { ++ rtw_ips_mode_req(pwrctrlpriv, mode); ++ DBG_871X("%s %s\n", __FUNCTION__, mode == IPS_NORMAL?"IPS_NORMAL":"IPS_LEVEL_2"); ++ return 0; ++ } ++ else if(mode ==IPS_NONE){ ++ rtw_ips_mode_req(pwrctrlpriv, mode); ++ DBG_871X("%s %s\n", __FUNCTION__, "IPS_NONE"); ++ if((padapter->bSurpriseRemoved ==0)&&(_FAIL == rtw_pwr_wakeup(padapter)) ) ++ return -EFAULT; ++ } ++ else { ++ return -EINVAL; ++ } ++ return 0; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c +new file mode 100644 +index 000000000000..63aba4a4cf76 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c +@@ -0,0 +1,4286 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_RECV_C_ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#include ++#include ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++void rtw_signal_stat_timer_hdl(RTW_TIMER_HDL_ARGS); ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++ ++void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv) ++{ ++ ++ ++_func_enter_; ++ ++ _rtw_memset((u8 *)psta_recvpriv, 0, sizeof (struct sta_recv_priv)); ++ ++ _rtw_spinlock_init(&psta_recvpriv->lock); ++ ++ //for(i=0; iblk_strms[i]); ++ ++ _rtw_init_queue(&psta_recvpriv->defrag_q); ++ ++_func_exit_; ++ ++} ++ ++sint _rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter) ++{ ++ sint i; ++ ++ union recv_frame *precvframe; ++ ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++ // We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc(). ++ //_rtw_memset((unsigned char *)precvpriv, 0, sizeof (struct recv_priv)); ++ ++ _rtw_spinlock_init(&precvpriv->lock); ++ ++ _rtw_init_queue(&precvpriv->free_recv_queue); ++ _rtw_init_queue(&precvpriv->recv_pending_queue); ++ _rtw_init_queue(&precvpriv->uc_swdec_pending_queue); ++ ++ precvpriv->adapter = padapter; ++ ++ precvpriv->free_recvframe_cnt = NR_RECVFRAME; ++ ++ rtw_os_recv_resource_init(precvpriv, padapter); ++ ++ precvpriv->pallocated_frame_buf = rtw_zvmalloc(NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ); ++ ++ if(precvpriv->pallocated_frame_buf==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ //_rtw_memset(precvpriv->pallocated_frame_buf, 0, NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ); ++ ++ precvpriv->precv_frame_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(precvpriv->pallocated_frame_buf), RXFRAME_ALIGN_SZ); ++ //precvpriv->precv_frame_buf = precvpriv->pallocated_frame_buf + RXFRAME_ALIGN_SZ - ++ // ((SIZE_PTR) (precvpriv->pallocated_frame_buf) &(RXFRAME_ALIGN_SZ-1)); ++ ++ precvframe = (union recv_frame*) precvpriv->precv_frame_buf; ++ ++ ++ for(i=0; i < NR_RECVFRAME ; i++) ++ { ++ _rtw_init_listhead(&(precvframe->u.list)); ++ ++ rtw_list_insert_tail(&(precvframe->u.list), &(precvpriv->free_recv_queue.queue)); ++ ++ res = rtw_os_recv_resource_alloc(padapter, precvframe); ++ ++ precvframe->u.hdr.adapter =padapter; ++ precvframe++; ++ ++ } ++ ++#ifdef CONFIG_USB_HCI ++ ++ precvpriv->rx_pending_cnt=1; ++ ++ _rtw_init_sema(&precvpriv->allrxreturnevt, 0); ++ ++#endif ++ ++ res = rtw_hal_init_recv_priv(padapter); ++ ++ precvpriv->recvbuf_skb_alloc_fail_cnt = 0; ++ precvpriv->recvbuf_null_cnt = 0; ++ precvpriv->read_port_complete_EINPROGRESS_cnt = 0; ++ precvpriv->read_port_complete_other_urb_err_cnt = 0; ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ #ifdef PLATFORM_LINUX ++ _init_timer(&precvpriv->signal_stat_timer, padapter->pnetdev, RTW_TIMER_HDL_NAME(signal_stat), padapter); ++ #elif defined(PLATFORM_OS_CE) || defined(PLATFORM_WINDOWS) ++ _init_timer(&precvpriv->signal_stat_timer, padapter->hndis_adapter, RTW_TIMER_HDL_NAME(signal_stat), padapter); ++ #endif ++ ++ precvpriv->signal_stat_sampling_interval = 1000; //ms ++ //precvpriv->signal_stat_converging_constant = 5000; //ms ++ ++ rtw_set_signal_stat_timer(precvpriv); ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++void rtw_mfree_recv_priv_lock(struct recv_priv *precvpriv); ++void rtw_mfree_recv_priv_lock(struct recv_priv *precvpriv) ++{ ++ _rtw_spinlock_free(&precvpriv->lock); ++#ifdef CONFIG_RECV_THREAD_MODE ++ _rtw_free_sema(&precvpriv->recv_sema); ++ _rtw_free_sema(&precvpriv->terminate_recvthread_sema); ++#endif ++ ++ _rtw_spinlock_free(&precvpriv->free_recv_queue.lock); ++ _rtw_spinlock_free(&precvpriv->recv_pending_queue.lock); ++ ++ _rtw_spinlock_free(&precvpriv->free_recv_buf_queue.lock); ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++ _rtw_spinlock_free(&precvpriv->recv_buf_pending_queue.lock); ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_RX ++} ++ ++void _rtw_free_recv_priv (struct recv_priv *precvpriv) ++{ ++ _adapter *padapter = precvpriv->adapter; ++ ++_func_enter_; ++ ++ rtw_free_uc_swdec_pending_queue(padapter); ++ ++ rtw_mfree_recv_priv_lock(precvpriv); ++ ++ rtw_os_recv_resource_free(precvpriv); ++ ++ if(precvpriv->pallocated_frame_buf) { ++ rtw_vmfree(precvpriv->pallocated_frame_buf, NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ); ++ } ++ ++ rtw_hal_free_recv_priv(padapter); ++ ++_func_exit_; ++ ++} ++ ++union recv_frame *_rtw_alloc_recvframe (_queue *pfree_recv_queue) ++{ ++ ++ union recv_frame *precvframe; ++ _list *plist, *phead; ++ _adapter *padapter; ++ struct recv_priv *precvpriv; ++_func_enter_; ++ ++ if(_rtw_queue_empty(pfree_recv_queue) == _TRUE) ++ { ++ precvframe = NULL; ++ } ++ else ++ { ++ phead = get_list_head(pfree_recv_queue); ++ ++ plist = get_next(phead); ++ ++ precvframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ ++ rtw_list_delete(&precvframe->u.hdr.list); ++ padapter=precvframe->u.hdr.adapter; ++ if(padapter !=NULL){ ++ precvpriv=&padapter->recvpriv; ++ if(pfree_recv_queue == &precvpriv->free_recv_queue) ++ precvpriv->free_recvframe_cnt--; ++ } ++ } ++ ++_func_exit_; ++ ++ return precvframe; ++ ++} ++ ++union recv_frame *rtw_alloc_recvframe (_queue *pfree_recv_queue) ++{ ++ _irqL irqL; ++ union recv_frame *precvframe; ++ ++ _enter_critical_bh(&pfree_recv_queue->lock, &irqL); ++ ++ precvframe = _rtw_alloc_recvframe(pfree_recv_queue); ++ ++ _exit_critical_bh(&pfree_recv_queue->lock, &irqL); ++ ++ return precvframe; ++} ++ ++void rtw_init_recvframe(union recv_frame *precvframe, struct recv_priv *precvpriv) ++{ ++ /* Perry: This can be removed */ ++ _rtw_init_listhead(&precvframe->u.hdr.list); ++ ++ precvframe->u.hdr.len=0; ++} ++ ++int rtw_free_recvframe(union recv_frame *precvframe, _queue *pfree_recv_queue) ++{ ++ _irqL irqL; ++ _adapter *padapter=precvframe->u.hdr.adapter; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++_func_enter_; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->adapter_type > PRIMARY_ADAPTER) ++ { ++ padapter = padapter->pbuddy_adapter;//get primary_padapter ++ precvpriv = &padapter->recvpriv; ++ pfree_recv_queue = &precvpriv->free_recv_queue; ++ precvframe->u.hdr.adapter = padapter; ++ } ++#endif ++ ++ ++#ifdef PLATFORM_WINDOWS ++ rtw_os_read_port(padapter, precvframe->u.hdr.precvbuf); ++#endif ++ ++#if defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD) ++ ++ if(precvframe->u.hdr.pkt) ++ { ++#ifdef CONFIG_BSD_RX_USE_MBUF ++ m_freem(precvframe->u.hdr.pkt); ++#else // CONFIG_BSD_RX_USE_MBUF ++ rtw_skb_free(precvframe->u.hdr.pkt);//free skb by driver ++#endif // CONFIG_BSD_RX_USE_MBUF ++ precvframe->u.hdr.pkt = NULL; ++ } ++ ++#endif //defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD) ++ ++ _enter_critical_bh(&pfree_recv_queue->lock, &irqL); ++ ++ rtw_list_delete(&(precvframe->u.hdr.list)); ++ ++ rtw_list_insert_tail(&(precvframe->u.hdr.list), get_list_head(pfree_recv_queue)); ++ ++ if(padapter !=NULL){ ++ if(pfree_recv_queue == &precvpriv->free_recv_queue) ++ precvpriv->free_recvframe_cnt++; ++ } ++ ++ _exit_critical_bh(&pfree_recv_queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++ ++ ++ ++sint _rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue) ++{ ++ ++ _adapter *padapter=precvframe->u.hdr.adapter; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++_func_enter_; ++ ++ //_rtw_init_listhead(&(precvframe->u.hdr.list)); ++ rtw_list_delete(&(precvframe->u.hdr.list)); ++ ++ ++ rtw_list_insert_tail(&(precvframe->u.hdr.list), get_list_head(queue)); ++ ++ if (padapter != NULL) { ++ if (queue == &precvpriv->free_recv_queue) ++ precvpriv->free_recvframe_cnt++; ++ } ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++sint rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue) ++{ ++ sint ret; ++ _irqL irqL; ++ ++ //_spinlock(&pfree_recv_queue->lock); ++ _enter_critical_bh(&queue->lock, &irqL); ++ ret = _rtw_enqueue_recvframe(precvframe, queue); ++ //_rtw_spinunlock(&pfree_recv_queue->lock); ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++ return ret; ++} ++ ++/* ++sint rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue) ++{ ++ return rtw_free_recvframe(precvframe, queue); ++} ++*/ ++ ++ ++ ++ ++/* ++caller : defrag ; recvframe_chk_defrag in recv_thread (passive) ++pframequeue: defrag_queue : will be accessed in recv_thread (passive) ++ ++using spinlock to protect ++ ++*/ ++ ++void rtw_free_recvframe_queue(_queue *pframequeue, _queue *pfree_recv_queue) ++{ ++ union recv_frame *precvframe; ++ _list *plist, *phead; ++ ++_func_enter_; ++ _rtw_spinlock(&pframequeue->lock); ++ ++ phead = get_list_head(pframequeue); ++ plist = get_next(phead); ++ ++ while(rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ precvframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ ++ plist = get_next(plist); ++ ++ //rtw_list_delete(&precvframe->u.hdr.list); // will do this in rtw_free_recvframe() ++ ++ rtw_free_recvframe(precvframe, pfree_recv_queue); ++ } ++ ++ _rtw_spinunlock(&pframequeue->lock); ++ ++_func_exit_; ++ ++} ++ ++u32 rtw_free_uc_swdec_pending_queue(_adapter *adapter) ++{ ++ u32 cnt = 0; ++ union recv_frame *pending_frame; ++ while((pending_frame=rtw_alloc_recvframe(&adapter->recvpriv.uc_swdec_pending_queue))) { ++ rtw_free_recvframe(pending_frame, &adapter->recvpriv.free_recv_queue); ++ DBG_871X("%s: dequeue uc_swdec_pending_queue\n", __func__); ++ cnt++; ++ } ++ ++ return cnt; ++} ++ ++ ++sint rtw_enqueue_recvbuf_to_head(struct recv_buf *precvbuf, _queue *queue) ++{ ++ _irqL irqL; ++ ++ _enter_critical(&queue->lock, &irqL); ++ ++ rtw_list_delete(&precvbuf->list); ++ rtw_list_insert_head(&precvbuf->list, get_list_head(queue)); ++ ++ _exit_critical(&queue->lock, &irqL); ++ ++ return _SUCCESS; ++} ++ ++sint rtw_enqueue_recvbuf(struct recv_buf *precvbuf, _queue *queue) ++{ ++ _irqL irqL; ++ ++ _enter_critical(&queue->lock, &irqL); ++ ++ rtw_list_delete(&precvbuf->list); ++ ++ rtw_list_insert_tail(&precvbuf->list, get_list_head(queue)); ++ ++ _exit_critical(&queue->lock, &irqL); ++ ++ ++ return _SUCCESS; ++ ++} ++ ++struct recv_buf *rtw_dequeue_recvbuf (_queue *queue) ++{ ++ _irqL irqL; ++ struct recv_buf *precvbuf; ++ _list *plist, *phead; ++ ++ _enter_critical(&queue->lock, &irqL); ++ ++ if(_rtw_queue_empty(queue) == _TRUE) ++ { ++ precvbuf = NULL; ++ } ++ else ++ { ++ phead = get_list_head(queue); ++ ++ plist = get_next(phead); ++ ++ precvbuf = LIST_CONTAINOR(plist, struct recv_buf, list); ++ ++ rtw_list_delete(&precvbuf->list); ++ ++ } ++ ++ _exit_critical(&queue->lock, &irqL); ++ ++ ++ return precvbuf; ++ ++} ++ ++sint recvframe_chkmic(_adapter *adapter, union recv_frame *precvframe); ++sint recvframe_chkmic(_adapter *adapter, union recv_frame *precvframe){ ++ ++ sint i,res=_SUCCESS; ++ u32 datalen; ++ u8 miccode[8]; ++ u8 bmic_err=_FALSE,brpt_micerror = _TRUE; ++ u8 *pframe, *payload,*pframemic; ++ u8 *mickey; ++ //u8 *iv,rxdata_key_idx=0; ++ struct sta_info *stainfo; ++ struct rx_pkt_attrib *prxattrib=&precvframe->u.hdr.attrib; ++ struct security_priv *psecuritypriv=&adapter->securitypriv; ++ ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++_func_enter_; ++ ++ stainfo=rtw_get_stainfo(&adapter->stapriv ,&prxattrib->ta[0]); ++ ++ if(prxattrib->encrypt ==_TKIP_) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:prxattrib->encrypt ==_TKIP_\n")); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:da=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", ++ prxattrib->ra[0],prxattrib->ra[1],prxattrib->ra[2],prxattrib->ra[3],prxattrib->ra[4],prxattrib->ra[5])); ++ ++ //calculate mic code ++ if(stainfo!= NULL) ++ { ++ if(IS_MCAST(prxattrib->ra)) ++ { ++ //mickey=&psecuritypriv->dot118021XGrprxmickey.skey[0]; ++ //iv = precvframe->u.hdr.rx_data+prxattrib->hdrlen; ++ //rxdata_key_idx =( ((iv[3])>>6)&0x3) ; ++ mickey=&psecuritypriv->dot118021XGrprxmickey[prxattrib->key_index].skey[0]; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic: bcmc key \n")); ++ //DBG_871X("\n recvframe_chkmic: bcmc key psecuritypriv->dot118021XGrpKeyid(%d),pmlmeinfo->key_index(%d) ,recv key_id(%d)\n", ++ // psecuritypriv->dot118021XGrpKeyid,pmlmeinfo->key_index,rxdata_key_idx); ++ ++ if(psecuritypriv->binstallGrpkey==_FALSE) ++ { ++ res=_FAIL; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n recvframe_chkmic:didn't install group key!!!!!!!!!!\n")); ++ DBG_871X("\n recvframe_chkmic:didn't install group key!!!!!!!!!!\n"); ++ goto exit; ++ } ++ } ++ else{ ++ mickey=&stainfo->dot11tkiprxmickey.skey[0]; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n recvframe_chkmic: unicast key \n")); ++ } ++ ++ datalen=precvframe->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len-prxattrib->icv_len-8;//icv_len included the mic code ++ pframe=precvframe->u.hdr.rx_data; ++ payload=pframe+prxattrib->hdrlen+prxattrib->iv_len; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n prxattrib->iv_len=%d prxattrib->icv_len=%d\n",prxattrib->iv_len,prxattrib->icv_len)); ++ ++ //rtw_seccalctkipmic(&stainfo->dot11tkiprxmickey.skey[0],pframe,payload, datalen ,&miccode[0],(unsigned char)prxattrib->priority); //care the length of the data ++ ++ rtw_seccalctkipmic(mickey,pframe,payload, datalen ,&miccode[0],(unsigned char)prxattrib->priority); //care the length of the data ++ ++ pframemic=payload+datalen; ++ ++ bmic_err=_FALSE; ++ ++ for(i=0;i<8;i++){ ++ if(miccode[i] != *(pframemic+i)){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic:miccode[%d](%02x) != *(pframemic+%d)(%02x) ",i,miccode[i],i,*(pframemic+i))); ++ bmic_err=_TRUE; ++ } ++ } ++ ++ ++ if(bmic_err==_TRUE){ ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n *(pframemic-8)-*(pframemic-1)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", ++ *(pframemic-8),*(pframemic-7),*(pframemic-6),*(pframemic-5),*(pframemic-4),*(pframemic-3),*(pframemic-2),*(pframemic-1))); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n *(pframemic-16)-*(pframemic-9)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", ++ *(pframemic-16),*(pframemic-15),*(pframemic-14),*(pframemic-13),*(pframemic-12),*(pframemic-11),*(pframemic-10),*(pframemic-9))); ++ ++ { ++ uint i; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n ======demp packet (len=%d)======\n",precvframe->u.hdr.len)); ++ for(i=0;iu.hdr.len;i=i+8){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x", ++ *(precvframe->u.hdr.rx_data+i),*(precvframe->u.hdr.rx_data+i+1), ++ *(precvframe->u.hdr.rx_data+i+2),*(precvframe->u.hdr.rx_data+i+3), ++ *(precvframe->u.hdr.rx_data+i+4),*(precvframe->u.hdr.rx_data+i+5), ++ *(precvframe->u.hdr.rx_data+i+6),*(precvframe->u.hdr.rx_data+i+7))); ++ } ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n ======demp packet end [len=%d]======\n",precvframe->u.hdr.len)); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n hrdlen=%d, \n",prxattrib->hdrlen)); ++ } ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("ra=0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x psecuritypriv->binstallGrpkey=%d ", ++ prxattrib->ra[0],prxattrib->ra[1],prxattrib->ra[2], ++ prxattrib->ra[3],prxattrib->ra[4],prxattrib->ra[5],psecuritypriv->binstallGrpkey)); ++ ++ // double check key_index for some timing issue , ++ // cannot compare with psecuritypriv->dot118021XGrpKeyid also cause timing issue ++ if((IS_MCAST(prxattrib->ra)==_TRUE) && (prxattrib->key_index != pmlmeinfo->key_index )) ++ brpt_micerror = _FALSE; ++ ++ if(brpt_micerror == _TRUE) ++ { ++ rtw_handle_tkip_mic_err(adapter,(u8)IS_MCAST(prxattrib->ra)); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" mic error :prxattrib->bdecrypted=%d \n", brpt_micerror)); ++ DBG_871X(" mic error :brpt_micerror=%d\n", brpt_micerror); ++ } ++ ++ res=_FAIL; ++ ++ } ++ else{ ++ //mic checked ok ++ if((psecuritypriv->bcheck_grpkey ==_FALSE)&&(IS_MCAST(prxattrib->ra)==_TRUE)){ ++ psecuritypriv->bcheck_grpkey =_TRUE; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("psecuritypriv->bcheck_grpkey =_TRUE")); ++ } ++ } ++ ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic: rtw_get_stainfo==NULL!!!\n")); ++ } ++ ++ recvframe_pull_tail(precvframe, 8); ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++//decrypt and set the ivlen,icvlen of the recv_frame ++union recv_frame * decryptor(_adapter *padapter,union recv_frame *precv_frame); ++union recv_frame * decryptor(_adapter *padapter,union recv_frame *precv_frame) ++{ ++ ++ struct rx_pkt_attrib *prxattrib = &precv_frame->u.hdr.attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ union recv_frame *return_packet=precv_frame; ++ u32 res=_SUCCESS; ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("prxstat->decrypted=%x prxattrib->encrypt = 0x%03x\n",prxattrib->bdecrypted,prxattrib->encrypt)); ++ ++ if(prxattrib->encrypt>0) ++ { ++ u8 *iv = precv_frame->u.hdr.rx_data+prxattrib->hdrlen; ++ prxattrib->key_index = ( ((iv[3])>>6)&0x3) ; ++ ++ if(prxattrib->key_index > WEP_KEYS) ++ { ++ DBG_871X("prxattrib->key_index(%d) > WEP_KEYS \n", prxattrib->key_index); ++ ++ switch(prxattrib->encrypt){ ++ case _WEP40_: ++ case _WEP104_: ++ prxattrib->key_index = psecuritypriv->dot11PrivacyKeyIndex; ++ break; ++ case _TKIP_: ++ case _AES_: ++ default: ++ prxattrib->key_index = psecuritypriv->dot118021XGrpKeyid; ++ break; ++ } ++ } ++ } ++ ++ if((prxattrib->encrypt>0) && ((prxattrib->bdecrypted==0) ||(psecuritypriv->sw_decrypt==_TRUE))) ++ { ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(!IS_MCAST(prxattrib->ra))//bc/mc packets use sw decryption for concurrent mode ++#endif ++ psecuritypriv->hw_decrypted=_FALSE; ++ ++ #ifdef DBG_RX_DECRYPTOR ++ DBG_871X("prxstat->bdecrypted:%d, prxattrib->encrypt:%d, Setting psecuritypriv->hw_decrypted = %d\n" ++ , prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted); ++ #endif ++ ++ switch(prxattrib->encrypt){ ++ case _WEP40_: ++ case _WEP104_: ++ rtw_wep_decrypt(padapter, (u8 *)precv_frame); ++ break; ++ case _TKIP_: ++ res = rtw_tkip_decrypt(padapter, (u8 *)precv_frame); ++ break; ++ case _AES_: ++ res = rtw_aes_decrypt(padapter, (u8 * )precv_frame); ++ break; ++ default: ++ break; ++ } ++ } ++ else if(prxattrib->bdecrypted==1 ++ && prxattrib->encrypt >0 ++ && (psecuritypriv->busetkipkey==1 || prxattrib->encrypt !=_TKIP_ ) ++ ) ++ { ++#if 0 ++ if((prxstat->icv==1)&&(prxattrib->encrypt!=_AES_)) ++ { ++ psecuritypriv->hw_decrypted=_FALSE; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("psecuritypriv->hw_decrypted=_FALSE")); ++ ++ rtw_free_recvframe(precv_frame, &padapter->recvpriv.free_recv_queue); ++ ++ return_packet=NULL; ++ ++ } ++ else ++#endif ++ { ++ psecuritypriv->hw_decrypted=_TRUE; ++ #ifdef DBG_RX_DECRYPTOR ++ DBG_871X("prxstat->bdecrypted:%d, prxattrib->encrypt:%d, Setting psecuritypriv->hw_decrypted = %d\n" ++ , prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted); ++ #endif ++ ++ } ++ } ++ else { ++ #ifdef DBG_RX_DECRYPTOR ++ DBG_871X("prxstat->bdecrypted:%d, prxattrib->encrypt:%d, psecuritypriv->hw_decrypted:%d\n" ++ , prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted); ++ #endif ++ } ++ ++ if(res == _FAIL) ++ { ++ rtw_free_recvframe(return_packet,&padapter->recvpriv.free_recv_queue); ++ return_packet = NULL; ++ ++ } ++ //recvframe_chkmic(adapter, precv_frame); //move to recvframme_defrag function ++ ++_func_exit_; ++ ++ return return_packet; ++ ++} ++//###set the security information in the recv_frame ++union recv_frame * portctrl(_adapter *adapter,union recv_frame * precv_frame); ++union recv_frame * portctrl(_adapter *adapter,union recv_frame * precv_frame) ++{ ++ u8 *psta_addr,*ptr; ++ uint auth_alg; ++ struct recv_frame_hdr *pfhdr; ++ struct sta_info * psta; ++ struct sta_priv *pstapriv ; ++ union recv_frame * prtnframe; ++ u16 ether_type=0; ++ u16 eapol_type = 0x888e;//for Funia BD's WPA issue ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ ++_func_enter_; ++ ++ pstapriv = &adapter->stapriv; ++ ptr = get_recvframe_data(precv_frame); ++ pfhdr = &precv_frame->u.hdr; ++ psta_addr = pfhdr->attrib.ta; ++ psta = rtw_get_stainfo(pstapriv, psta_addr); ++ ++ auth_alg = adapter->securitypriv.dot11AuthAlgrthm; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:adapter->securitypriv.dot11AuthAlgrthm= 0x%d\n",adapter->securitypriv.dot11AuthAlgrthm)); ++ ++ if(auth_alg==2) ++ { ++ if ((psta!=NULL) && (psta->ieee8021x_blocked)) ++ { ++ //blocked ++ //only accept EAPOL frame ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:psta->ieee8021x_blocked==1\n")); ++ ++ prtnframe=precv_frame; ++ ++ //get ether_type ++ ptr=ptr+pfhdr->attrib.hdrlen+pfhdr->attrib.iv_len+LLC_HEADER_SIZE; ++ _rtw_memcpy(ðer_type,ptr, 2); ++ ether_type= ntohs((unsigned short )ether_type); ++ ++ if (ether_type == eapol_type) { ++ prtnframe=precv_frame; ++ } ++ else { ++ //free this frame ++ rtw_free_recvframe(precv_frame, &adapter->recvpriv.free_recv_queue); ++ prtnframe=NULL; ++ } ++ } ++ else ++ { ++ //allowed ++ //check decryption status, and decrypt the frame if needed ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:psta->ieee8021x_blocked==0\n")); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("portctrl:precv_frame->hdr.attrib.privacy=%x\n",precv_frame->u.hdr.attrib.privacy)); ++ ++ if(pattrib->bdecrypted==0) ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("portctrl:prxstat->decrypted=%x\n", pattrib->bdecrypted)); ++ ++ prtnframe=precv_frame; ++ //check is the EAPOL frame or not (Rekey) ++ if(ether_type == eapol_type){ ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("########portctrl:ether_type == 0x888e\n")); ++ //check Rekey ++ ++ prtnframe=precv_frame; ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("########portctrl:ether_type = 0x%.4x\n",ether_type)); ++ } ++ } ++ } ++ else ++ { ++ prtnframe=precv_frame; ++ } ++ ++_func_exit_; ++ ++ return prtnframe; ++ ++} ++ ++sint recv_decache(union recv_frame *precv_frame, u8 bretry, struct stainfo_rxcache *prxcache); ++sint recv_decache(union recv_frame *precv_frame, u8 bretry, struct stainfo_rxcache *prxcache) ++{ ++ sint tid = precv_frame->u.hdr.attrib.priority; ++ ++ u16 seq_ctrl = ( (precv_frame->u.hdr.attrib.seq_num&0xffff) << 4) | ++ (precv_frame->u.hdr.attrib.frag_num & 0xf); ++ ++_func_enter_; ++ ++ if(tid>15) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_decache, (tid>15)! seq_ctrl=0x%x, tid=0x%x\n", seq_ctrl, tid)); ++ ++ return _FAIL; ++ } ++ ++ if(1)//if(bretry) ++ { ++ if(seq_ctrl == prxcache->tid_rxseq[tid]) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_decache, seq_ctrl=0x%x, tid=0x%x, tid_rxseq=0x%x\n", seq_ctrl, tid, prxcache->tid_rxseq[tid])); ++ ++ return _FAIL; ++ } ++ } ++ ++ prxcache->tid_rxseq[tid] = seq_ctrl; ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++void process_pwrbit_data(_adapter *padapter, union recv_frame *precv_frame); ++void process_pwrbit_data(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_AP_MODE ++ unsigned char pwrbit; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta=NULL; ++ ++ psta = rtw_get_stainfo(pstapriv, pattrib->src); ++ ++ pwrbit = GetPwrMgt(ptr); ++ ++ if(psta) ++ { ++ if(pwrbit) ++ { ++ if(!(psta->state & WIFI_SLEEP_STATE)) ++ { ++ //psta->state |= WIFI_SLEEP_STATE; ++ //pstapriv->sta_dz_bitmap |= BIT(psta->aid); ++ ++ stop_sta_xmit(padapter, psta); ++ ++ //DBG_871X("to sleep, sta_dz_bitmap=%x\n", pstapriv->sta_dz_bitmap); ++ } ++ } ++ else ++ { ++ if(psta->state & WIFI_SLEEP_STATE) ++ { ++ //psta->state ^= WIFI_SLEEP_STATE; ++ //pstapriv->sta_dz_bitmap &= ~BIT(psta->aid); ++ ++ wakeup_sta_to_xmit(padapter, psta); ++ ++ //DBG_871X("to wakeup, sta_dz_bitmap=%x\n", pstapriv->sta_dz_bitmap); ++ } ++ } ++ ++ } ++ ++#endif ++} ++ ++void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame); ++void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_AP_MODE ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta=NULL; ++ ++ psta = rtw_get_stainfo(pstapriv, pattrib->src); ++ ++ if(!psta) return; ++ ++#ifdef CONFIG_TDLS ++ if( !(psta->tdls_sta_state & TDLS_LINKED_STATE ) ) ++ { ++#endif //CONFIG_TDLS ++ ++ if(!psta->qos_option) ++ return; ++ ++ if(!(psta->qos_info&0xf)) ++ return; ++ ++#ifdef CONFIG_TDLS ++ } ++#endif //CONFIG_TDLS ++ ++ if(psta->state&WIFI_SLEEP_STATE) ++ { ++ u8 wmmps_ac=0; ++ ++ switch(pattrib->priority) ++ { ++ case 1: ++ case 2: ++ wmmps_ac = psta->uapsd_bk&BIT(1); ++ break; ++ case 4: ++ case 5: ++ wmmps_ac = psta->uapsd_vi&BIT(1); ++ break; ++ case 6: ++ case 7: ++ wmmps_ac = psta->uapsd_vo&BIT(1); ++ break; ++ case 0: ++ case 3: ++ default: ++ wmmps_ac = psta->uapsd_be&BIT(1); ++ break; ++ } ++ ++ if(wmmps_ac) ++ { ++ if(psta->sleepq_ac_len>0) ++ { ++ //process received triggered frame ++ xmit_delivery_enabled_frames(padapter, psta); ++ } ++ else ++ { ++ //issue one qos null frame with More data bit = 0 and the EOSP bit set (=1) ++ issue_qos_nulldata(padapter, psta->hwaddr, (u16)pattrib->priority, 0, 0); ++ } ++ } ++ ++ } ++ ++ ++#endif ++ ++} ++ ++#ifdef CONFIG_TDLS ++sint OnTDLS(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ sint ret = _SUCCESS; ++ u8 *paction = get_recvframe_data(precv_frame); ++ u8 category_field = 1; ++#ifdef CONFIG_WFD ++ u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a }; ++#endif //CONFIG_WFD ++ struct tdls_info *ptdlsinfo = &(adapter->tdlsinfo); ++ ++ //point to action field ++ paction+=pattrib->hdrlen ++ + pattrib->iv_len ++ + SNAP_SIZE ++ + ETH_TYPE_LEN ++ + PAYLOAD_TYPE_LEN ++ + category_field; ++ ++ if(ptdlsinfo->enable == 0) ++ { ++ DBG_871X("recv tdls frame, " ++ "but tdls haven't enabled\n"); ++ ret = _FAIL; ++ return ret; ++ } ++ ++ switch(*paction){ ++ case TDLS_SETUP_REQUEST: ++ DBG_871X("recv tdls setup request frame\n"); ++ ret=On_TDLS_Setup_Req(adapter, precv_frame); ++ break; ++ case TDLS_SETUP_RESPONSE: ++ DBG_871X("recv tdls setup response frame\n"); ++ ret=On_TDLS_Setup_Rsp(adapter, precv_frame); ++ break; ++ case TDLS_SETUP_CONFIRM: ++ DBG_871X("recv tdls setup confirm frame\n"); ++ ret=On_TDLS_Setup_Cfm(adapter, precv_frame); ++ break; ++ case TDLS_TEARDOWN: ++ DBG_871X("recv tdls teardown, free sta_info\n"); ++ ret=On_TDLS_Teardown(adapter, precv_frame); ++ break; ++ case TDLS_DISCOVERY_REQUEST: ++ DBG_871X("recv tdls discovery request frame\n"); ++ ret=On_TDLS_Dis_Req(adapter, precv_frame); ++ break; ++ case TDLS_PEER_TRAFFIC_RESPONSE: ++ DBG_871X("recv tdls peer traffic response frame\n"); ++ ret=On_TDLS_Peer_Traffic_Rsp(adapter, precv_frame); ++ break; ++ case TDLS_CHANNEL_SWITCH_REQUEST: ++ DBG_871X("recv tdls channel switch request frame\n"); ++ ret=On_TDLS_Ch_Switch_Req(adapter, precv_frame); ++ break; ++ case TDLS_CHANNEL_SWITCH_RESPONSE: ++ DBG_871X("recv tdls channel switch response frame\n"); ++ ret=On_TDLS_Ch_Switch_Rsp(adapter, precv_frame); ++ break; ++#ifdef CONFIG_WFD ++ case 0x50: //First byte of WFA OUI ++ if( _rtw_memcmp(WFA_OUI, (paction), 3) ) ++ { ++ if( *(paction + 3) == 0x04) //Probe request frame ++ { ++ //WFDTDLS: for sigma test, do not setup direct link automatically ++ ptdlsinfo->dev_discovered = 1; ++ DBG_871X("recv tunneled probe request frame\n"); ++ issue_tunneled_probe_rsp(adapter, precv_frame); ++ } ++ if( *(paction + 3) == 0x05) //Probe response frame ++ { ++ //WFDTDLS: for sigma test, do not setup direct link automatically ++ ptdlsinfo->dev_discovered = 1; ++ DBG_871X("recv tunneled probe response frame\n"); ++ } ++ } ++ break; ++#endif //CONFIG_WFD ++ default: ++ DBG_871X("receive TDLS frame but not supported\n"); ++ ret=_FAIL; ++ break; ++ } ++ ++exit: ++ return ret; ++ ++} ++#endif //CONFIG_TDLS ++ ++void count_rx_stats(_adapter *padapter, union recv_frame *prframe, struct sta_info*sta); ++void count_rx_stats(_adapter *padapter, union recv_frame *prframe, struct sta_info*sta) ++{ ++ int sz; ++ struct sta_info *psta = NULL; ++ struct stainfo_stats *pstats = NULL; ++ struct rx_pkt_attrib *pattrib = & prframe->u.hdr.attrib; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ sz = get_recvframe_len(prframe); ++ precvpriv->rx_bytes += sz; ++ ++ padapter->mlmepriv.LinkDetectInfo.NumRxOkInPeriod++; ++ ++ if( (!MacAddr_isBcst(pattrib->dst)) && (!IS_MCAST(pattrib->dst))){ ++ padapter->mlmepriv.LinkDetectInfo.NumRxUnicastOkInPeriod++; ++ } ++ ++ if(sta) ++ psta = sta; ++ else ++ psta = prframe->u.hdr.psta; ++ ++ if(psta) ++ { ++ pstats = &psta->sta_stats; ++ ++ pstats->rx_data_pkts++; ++ pstats->rx_bytes += sz; ++ } ++ ++} ++ ++sint sta2sta_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ++); ++sint sta2sta_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ++) ++{ ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ sint ret = _SUCCESS; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ u8 *mybssid = get_bssid(pmlmepriv); ++ u8 *myhwaddr = myid(&adapter->eeprompriv); ++ u8 * sta_addr = NULL; ++ sint bmcast = IS_MCAST(pattrib->dst); ++ ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++ struct sta_info *ptdls_sta=NULL; ++ u8 *psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE; ++ u8 *pframe_body = psnap_type + ETH_TYPE_LEN + PAYLOAD_TYPE_LEN; ++#endif //CONFIG_TDLS ++ ++_func_enter_; ++ ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) ++ { ++ ++ // filter packets that SA is myself or multicast or broadcast ++ if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" SA==myself \n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ if( (!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN)) && (!bmcast) ){ ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) ) { ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ sta_addr = pattrib->src; ++ ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++#ifdef CONFIG_TDLS ++ //direct link data transfer ++ if(ptdlsinfo->setup_state == TDLS_LINKED_STATE){ ++ ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->src); ++ if(ptdls_sta==NULL) ++ { ++ ret=_FAIL; ++ goto exit; ++ } ++ else if(ptdls_sta->tdls_sta_state&TDLS_LINKED_STATE) ++ { ++ //drop QoS-SubType Data, including QoS NULL, excluding QoS-Data ++ if( (GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE )== WIFI_QOS_DATA_TYPE) ++ { ++ if(GetFrameSubType(ptr)&(BIT(4)|BIT(5)|BIT(6))) ++ { ++ DBG_871X("drop QoS-Sybtype Data\n"); ++ ret= _FAIL; ++ goto exit; ++ } ++ } ++ // filter packets that SA is myself or multicast or broadcast ++ if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){ ++ ret= _FAIL; ++ goto exit; ++ } ++ // da should be for me ++ if((!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN))&& (!bmcast)) ++ { ++ ret= _FAIL; ++ goto exit; ++ } ++ // check BSSID ++ if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) ) ++ { ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ //process UAPSD tdls sta ++ process_pwrbit_data(adapter, precv_frame); ++ ++ // if NULL-frame, check pwrbit ++ if ((GetFrameSubType(ptr)) == WIFI_DATA_NULL) ++ { ++ //NULL-frame with pwrbit=1, buffer_STA should buffer frames for sleep_STA ++ if(GetPwrMgt(ptr)) ++ { ++ DBG_871X("TDLS: recv peer null frame with pwr bit 1\n"); ++ ptdls_sta->tdls_sta_state|=TDLS_PEER_SLEEP_STATE; ++ } ++ // it would be triggered when we are off channel and receiving NULL DATA ++ // we can confirm that peer STA is at off channel ++ else if(ptdls_sta->tdls_sta_state&TDLS_CH_SWITCH_ON_STATE) ++ { ++ if((ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE) != TDLS_PEER_AT_OFF_STATE) ++ { ++ issue_nulldata_to_TDLS_peer_STA(adapter, ptdls_sta, 0); ++ ptdls_sta->tdls_sta_state |= TDLS_PEER_AT_OFF_STATE; ++ On_TDLS_Peer_Traffic_Rsp(adapter, precv_frame); ++ } ++ } ++ ++ ret= _FAIL; ++ goto exit; ++ } ++ //receive some of all TDLS management frames, process it at ON_TDLS ++ if((_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_TDLS, 2))){ ++ ret= OnTDLS(adapter, precv_frame); ++ goto exit; ++ } ++ ++ } ++ ++ sta_addr = pattrib->src; ++ ++ } ++ else ++#endif //CONFIG_TDLS ++ { ++ // For Station mode, sa and bssid should always be BSSID, and DA is my mac-address ++ if(!_rtw_memcmp(pattrib->bssid, pattrib->src, ETH_ALEN) ) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("bssid != TA under STATION_MODE; drop pkt\n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ sta_addr = pattrib->bssid; ++ } ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ if (bmcast) ++ { ++ // For AP mode, if DA == MCAST, then BSSID should be also MCAST ++ if (!IS_MCAST(pattrib->bssid)){ ++ ret= _FAIL; ++ goto exit; ++ } ++ } ++ else // not mc-frame ++ { ++ // For AP mode, if DA is non-MCAST, then it must be BSSID, and bssid == BSSID ++ if(!_rtw_memcmp(pattrib->bssid, pattrib->dst, ETH_ALEN)) { ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ sta_addr = pattrib->src; ++ } ++ ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ { ++ _rtw_memcpy(pattrib->dst, GetAddr1Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->src, GetAddr2Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->bssid, GetAddr3Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ sta_addr = mybssid; ++ } ++ else ++ { ++ ret = _FAIL; ++ } ++ ++ ++ ++ if(bmcast) ++ *psta = rtw_get_bcmc_stainfo(adapter); ++ else ++ *psta = rtw_get_stainfo(pstapriv, sta_addr); // get ap_info ++ ++#ifdef CONFIG_TDLS ++ if(ptdls_sta != NULL) ++ *psta = ptdls_sta; ++#endif //CONFIG_TDLS ++ ++ ++ if (*psta == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under sta2sta_data_frame ; drop pkt\n")); ++#ifdef CONFIG_MP_INCLUDED ++ if(check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ adapter->mppriv.rx_pktloss++; ++#endif ++ ret= _FAIL; ++ goto exit; ++ } ++ ++exit: ++_func_exit_; ++ return ret; ++ ++} ++ ++sint ap2sta_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ); ++sint ap2sta_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ) ++{ ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ sint ret = _SUCCESS; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ u8 *mybssid = get_bssid(pmlmepriv); ++ u8 *myhwaddr = myid(&adapter->eeprompriv); ++ sint bmcast = IS_MCAST(pattrib->dst); ++ ++_func_enter_; ++ ++ if ((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ && (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE ++ || check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE ) ++ ) ++ { ++ ++ // filter packets that SA is myself or multicast or broadcast ++ if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" SA==myself \n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s SA=%x:%x:%x:%x:%x:%x, myhwaddr= %x:%x:%x:%x:%x:%x\n", __FUNCTION__, ++ pattrib->src[0], pattrib->src[1], pattrib->src[2], ++ pattrib->src[3], pattrib->src[4], pattrib->src[5], ++ *(myhwaddr), *(myhwaddr+1), *(myhwaddr+2), ++ *(myhwaddr+3), *(myhwaddr+4), *(myhwaddr+5)); ++ #endif ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ // da should be for me ++ if((!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN))&& (!bmcast)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_, ++ (" ap2sta_data_frame: compare DA fail; DA="MAC_FMT"\n", MAC_ARG(pattrib->dst))); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s DA="MAC_FMT"\n", __func__, MAC_ARG(pattrib->dst)); ++ #endif ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ ++ // check BSSID ++ if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) || ++ (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) ) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_, ++ (" ap2sta_data_frame: compare BSSID fail ; BSSID="MAC_FMT"\n", MAC_ARG(pattrib->bssid))); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("mybssid="MAC_FMT"\n", MAC_ARG(mybssid))); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s BSSID="MAC_FMT", mybssid="MAC_FMT"\n", ++ __FUNCTION__, MAC_ARG(pattrib->bssid), MAC_ARG(mybssid)); ++ DBG_871X( "this adapter = %d, buddy adapter = %d\n", adapter->adapter_type, adapter->pbuddy_adapter->adapter_type ); ++ #endif ++ ++ if(!bmcast) ++ { ++ DBG_871X("issue_deauth to the nonassociated ap=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->bssid)); ++ issue_deauth(adapter, pattrib->bssid, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); ++ } ++ ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ if(bmcast) ++ *psta = rtw_get_bcmc_stainfo(adapter); ++ else ++ *psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get ap_info ++ ++ if (*psta == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("ap2sta: can't get psta under STATION_MODE ; drop pkt\n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s can't get psta under STATION_MODE ; drop pkt\n", __FUNCTION__); ++ #endif ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ if ((GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE) == WIFI_QOS_DATA_TYPE) { ++ } ++ ++ if (GetFrameSubType(ptr) & BIT(6)) { ++ /* No data, will not indicate to upper layer, temporily count it here */ ++ count_rx_stats(adapter, precv_frame, *psta); ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ ++ } ++ else if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) && ++ (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ) ++ { ++ _rtw_memcpy(pattrib->dst, GetAddr1Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->src, GetAddr2Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->bssid, GetAddr3Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ // ++ _rtw_memcpy(pattrib->bssid, mybssid, ETH_ALEN); ++ ++ ++ *psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get sta_info ++ if (*psta == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under MP_MODE ; drop pkt\n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s can't get psta under WIFI_MP_STATE ; drop pkt\n", __FUNCTION__); ++ #endif ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ ++ } ++ else if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ /* Special case */ ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ else ++ { ++ if(_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN)&& (!bmcast)) ++ { ++ *psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get sta_info ++ if (*psta == NULL) ++ { ++ DBG_871X("issue_deauth to the ap=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->bssid)); ++ ++ issue_deauth(adapter, pattrib->bssid, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); ++ } ++ } ++ ++ ret = _FAIL; ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s fw_state:0x%x\n", __FUNCTION__, get_fwstate(pmlmepriv)); ++ #endif ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++ ++} ++ ++sint sta2ap_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ); ++sint sta2ap_data_frame( ++ _adapter *adapter, ++ union recv_frame *precv_frame, ++ struct sta_info**psta ) ++{ ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ unsigned char *mybssid = get_bssid(pmlmepriv); ++ sint ret=_SUCCESS; ++ ++_func_enter_; ++ ++ if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ //For AP mode, RA=BSSID, TX=STA(SRC_ADDR), A3=DST_ADDR ++ if(!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) ++ { ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ *psta = rtw_get_stainfo(pstapriv, pattrib->src); ++ if (*psta == NULL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under AP_MODE; drop pkt\n")); ++ DBG_871X("issue_deauth to sta=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->src)); ++ ++ issue_deauth(adapter, pattrib->src, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); ++ ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ ++ process_pwrbit_data(adapter, precv_frame); ++ ++ if ((GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE) == WIFI_QOS_DATA_TYPE) { ++ process_wmmps_data(adapter, precv_frame); ++ } ++ ++ if (GetFrameSubType(ptr) & BIT(6)) { ++ /* No data, will not indicate to upper layer, temporily count it here */ ++ count_rx_stats(adapter, precv_frame, *psta); ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ } ++ else { ++ u8 *myhwaddr = myid(&adapter->eeprompriv); ++ if (!_rtw_memcmp(pattrib->ra, myhwaddr, ETH_ALEN)) { ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ DBG_871X("issue_deauth to sta=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->src)); ++ issue_deauth(adapter, pattrib->src, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); ++ ret = RTW_RX_HANDLED; ++ goto exit; ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++ ++} ++ ++sint validate_recv_ctrl_frame(_adapter *padapter, union recv_frame *precv_frame); ++sint validate_recv_ctrl_frame(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_AP_MODE ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 *pframe = precv_frame->u.hdr.rx_data; ++ //uint len = precv_frame->u.hdr.len; ++ ++ //DBG_871X("+validate_recv_ctrl_frame\n"); ++ ++ if (GetFrameType(pframe) != WIFI_CTRL_TYPE) ++ { ++ return _FAIL; ++ } ++ ++ //receive the frames that ra(a1) is my address ++ if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN)) ++ { ++ return _FAIL; ++ } ++ ++ //only handle ps-poll ++ if(GetFrameSubType(pframe) == WIFI_PSPOLL) ++ { ++ u16 aid; ++ u8 wmmps_ac=0; ++ struct sta_info *psta=NULL; ++ ++ aid = GetAid(pframe); ++ psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); ++ ++ if((psta==NULL) || (psta->aid!=aid)) ++ { ++ return _FAIL; ++ } ++ ++ //for rx pkt statistics ++ psta->sta_stats.rx_ctrl_pkts++; ++ ++ switch(pattrib->priority) ++ { ++ case 1: ++ case 2: ++ wmmps_ac = psta->uapsd_bk&BIT(0); ++ break; ++ case 4: ++ case 5: ++ wmmps_ac = psta->uapsd_vi&BIT(0); ++ break; ++ case 6: ++ case 7: ++ wmmps_ac = psta->uapsd_vo&BIT(0); ++ break; ++ case 0: ++ case 3: ++ default: ++ wmmps_ac = psta->uapsd_be&BIT(0); ++ break; ++ } ++ ++ if(wmmps_ac) ++ return _FAIL; ++ ++ if(psta->state & WIFI_STA_ALIVE_CHK_STATE) ++ { ++ DBG_871X("%s alive check-rx ps-poll\n", __func__); ++ psta->expire_to = pstapriv->expire_to; ++ psta->state ^= WIFI_STA_ALIVE_CHK_STATE; ++ } ++ ++ if((psta->state&WIFI_SLEEP_STATE) && (pstapriv->sta_dz_bitmap&BIT(psta->aid))) ++ { ++ _irqL irqL; ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&psta->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ if ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ psta->sleepq_len--; ++ ++ if(psta->sleepq_len>0) ++ pxmitframe->attrib.mdata = 1; ++ else ++ pxmitframe->attrib.mdata = 0; ++ ++ pxmitframe->attrib.triggered = 1; ++ ++ //DBG_871X("handling ps-poll, q_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap); ++ ++#if 0 ++ _exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ } ++ _enter_critical_bh(&psta->sleep_q.lock, &irqL); ++#endif ++ rtw_hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ if(psta->sleepq_len==0) ++ { ++ pstapriv->tim_bitmap &= ~BIT(psta->aid); ++ ++ //DBG_871X("after handling ps-poll, tim=%x\n", pstapriv->tim_bitmap); ++ ++ //upate BCN for TIM IE ++ //update_BCNTIM(padapter); ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ } ++ ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ } ++ else ++ { ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ //DBG_871X("no buffered packets to xmit\n"); ++ if(pstapriv->tim_bitmap&BIT(psta->aid)) ++ { ++ if(psta->sleepq_len==0) ++ { ++ DBG_871X("no buffered packets to xmit\n"); ++ ++ //issue nulldata with More data bit = 0 to indicate we have no buffered packets ++ issue_nulldata(padapter, psta->hwaddr, 0, 0, 0); ++ } ++ else ++ { ++ DBG_871X("error!psta->sleepq_len=%d\n", psta->sleepq_len); ++ psta->sleepq_len=0; ++ } ++ ++ pstapriv->tim_bitmap &= ~BIT(psta->aid); ++ ++ //upate BCN for TIM IE ++ //update_BCNTIM(padapter); ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ } ++ ++ } ++ ++ } ++ ++ } ++ ++#endif ++ ++ return _FAIL; ++ ++} ++ ++union recv_frame* recvframe_chk_defrag(PADAPTER padapter, union recv_frame *precv_frame); ++sint validate_recv_mgnt_frame(PADAPTER padapter, union recv_frame *precv_frame); ++sint validate_recv_mgnt_frame(PADAPTER padapter, union recv_frame *precv_frame) ++{ ++ //struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("+validate_recv_mgnt_frame\n")); ++ ++#if 0 ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++#ifdef CONFIG_NATIVEAP_MLME ++ mgt_dispatcher(padapter, precv_frame); ++#else ++ rtw_hostapd_mlme_rx(padapter, precv_frame); ++#endif ++ } ++ else ++ { ++ mgt_dispatcher(padapter, precv_frame); ++ } ++#endif ++ ++ precv_frame = recvframe_chk_defrag(padapter, precv_frame); ++ if (precv_frame == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_,("%s: fragment packet\n",__FUNCTION__)); ++ return _SUCCESS; ++ } ++ ++ { ++ //for rx pkt statistics ++ struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, GetAddr2Ptr(precv_frame->u.hdr.rx_data)); ++ if (psta) { ++ psta->sta_stats.rx_mgnt_pkts++; ++ if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_BEACON) ++ psta->sta_stats.rx_beacon_pkts++; ++ else if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_PROBEREQ) ++ psta->sta_stats.rx_probereq_pkts++; ++ else if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_PROBERSP) { ++ if (_rtw_memcmp(padapter->eeprompriv.mac_addr, GetAddr1Ptr(precv_frame->u.hdr.rx_data), ETH_ALEN) == _TRUE) ++ psta->sta_stats.rx_probersp_pkts++; ++ else if (is_broadcast_mac_addr(GetAddr1Ptr(precv_frame->u.hdr.rx_data)) ++ || is_multicast_mac_addr(GetAddr1Ptr(precv_frame->u.hdr.rx_data))) ++ psta->sta_stats.rx_probersp_bm_pkts++; ++ else ++ psta->sta_stats.rx_probersp_uo_pkts++; ++ } ++ } ++ } ++ ++#ifdef CONFIG_INTEL_PROXIM ++ if(padapter->proximity.proxim_on==_TRUE) ++ { ++ struct rx_pkt_attrib * pattrib=&precv_frame->u.hdr.attrib; ++ struct recv_stat* prxstat=( struct recv_stat * ) precv_frame->u.hdr.rx_head ; ++ u8 * pda,*psa,*pbssid,*ptr; ++ ptr=precv_frame->u.hdr.rx_data; ++ pda = get_da(ptr); ++ psa = get_sa(ptr); ++ pbssid = get_hdr_bssid(ptr); ++ ++ ++ _rtw_memcpy(pattrib->dst, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, psa, ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->bssid, pbssid, ETH_ALEN); ++ ++ switch(pattrib->to_fr_ds) ++ { ++ case 0: ++ _rtw_memcpy(pattrib->ra, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, psa, ETH_ALEN); ++ break; ++ ++ case 1: ++ _rtw_memcpy(pattrib->ra, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pbssid, ETH_ALEN); ++ break; ++ ++ case 2: ++ _rtw_memcpy(pattrib->ra, pbssid, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, psa, ETH_ALEN); ++ break; ++ ++ case 3: ++ _rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" case 3\n")); ++ break; ++ ++ default: ++ break; ++ ++ } ++ pattrib->priority=0; ++ pattrib->hdrlen = pattrib->to_fr_ds==3 ? 30 : 24; ++ ++ padapter->proximity.proxim_rx(padapter,precv_frame); ++ } ++#endif ++ mgt_dispatcher(padapter, precv_frame); ++ ++ return _SUCCESS; ++ ++} ++ ++sint validate_recv_data_frame(_adapter *adapter, union recv_frame *precv_frame); ++sint validate_recv_data_frame(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ u8 bretry; ++ u8 *psa, *pda, *pbssid; ++ struct sta_info *psta = NULL; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ struct security_priv *psecuritypriv = &adapter->securitypriv; ++ sint ret = _SUCCESS; ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++#endif //CONFIG_TDLS ++ ++_func_enter_; ++ ++ bretry = GetRetry(ptr); ++ pda = get_da(ptr); ++ psa = get_sa(ptr); ++ pbssid = get_hdr_bssid(ptr); ++ ++ if(pbssid == NULL){ ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memcpy(pattrib->dst, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, psa, ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->bssid, pbssid, ETH_ALEN); ++ ++ switch(pattrib->to_fr_ds) ++ { ++ case 0: ++ _rtw_memcpy(pattrib->ra, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, psa, ETH_ALEN); ++ ret = sta2sta_data_frame(adapter, precv_frame, &psta); ++ break; ++ ++ case 1: ++ _rtw_memcpy(pattrib->ra, pda, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pbssid, ETH_ALEN); ++ ret = ap2sta_data_frame(adapter, precv_frame, &psta); ++ break; ++ ++ case 2: ++ _rtw_memcpy(pattrib->ra, pbssid, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, psa, ETH_ALEN); ++ ret = sta2ap_data_frame(adapter, precv_frame, &psta); ++ break; ++ ++ case 3: ++ _rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN); ++ ret =_FAIL; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" case 3\n")); ++ break; ++ ++ default: ++ ret =_FAIL; ++ break; ++ ++ } ++ ++ if(ret ==_FAIL){ ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s case:%d, res:%d\n", __FUNCTION__, pattrib->to_fr_ds, ret); ++ #endif ++ goto exit; ++ } else if (ret == RTW_RX_HANDLED) { ++ goto exit; ++ } ++ ++ ++ if(psta==NULL){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" after to_fr_ds_chk; psta==NULL \n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ //psta->rssi = prxcmd->rssi; ++ //psta->signal_quality= prxcmd->sq; ++ precv_frame->u.hdr.psta = psta; ++ ++ ++ pattrib->amsdu=0; ++ pattrib->ack_policy = 0; ++ //parsing QC field ++ if(pattrib->qos == 1) ++ { ++ pattrib->priority = GetPriority((ptr + 24)); ++ pattrib->ack_policy = GetAckpolicy((ptr + 24)); ++ pattrib->amsdu = GetAMsdu((ptr + 24)); ++ pattrib->hdrlen = pattrib->to_fr_ds==3 ? 32 : 26; ++ ++ if(pattrib->priority!=0 && pattrib->priority!=3) ++ { ++ adapter->recvpriv.bIsAnyNonBEPkts = _TRUE; ++ } ++ } ++ else ++ { ++ pattrib->priority=0; ++ pattrib->hdrlen = pattrib->to_fr_ds==3 ? 30 : 24; ++ } ++ ++ ++ if(pattrib->order)//HT-CTRL 11n ++ { ++ pattrib->hdrlen += 4; ++ } ++ ++ precv_frame->u.hdr.preorder_ctrl = &psta->recvreorder_ctrl[pattrib->priority]; ++ ++ // decache, drop duplicate recv packets ++ if(recv_decache(precv_frame, bretry, &psta->sta_recvpriv.rxcache) == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("decache : drop pkt\n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++#if 0 ++ if(psta->tdls_sta_state & TDLS_LINKED_STATE ) ++ { ++ if(psta->dot118021XPrivacy==_AES_) ++ pattrib->encrypt=psta->dot118021XPrivacy; ++ } ++#endif //CONFIG_TDLS ++ ++ if(pattrib->privacy){ ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("validate_recv_data_frame:pattrib->privacy=%x\n", pattrib->privacy)); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n ^^^^^^^^^^^IS_MCAST(pattrib->ra(0x%02x))=%d^^^^^^^^^^^^^^^6\n", pattrib->ra[0],IS_MCAST(pattrib->ra))); ++ ++#ifdef CONFIG_TDLS ++ if((psta->tdls_sta_state & TDLS_LINKED_STATE) && (psta->dot118021XPrivacy==_AES_)) ++ { ++ pattrib->encrypt=psta->dot118021XPrivacy; ++ } ++ else ++#endif //CONFIG_TDLS ++ GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, IS_MCAST(pattrib->ra)); ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n pattrib->encrypt=%d\n",pattrib->encrypt)); ++ ++ SET_ICE_IV_LEN(pattrib->iv_len, pattrib->icv_len, pattrib->encrypt); ++ } ++ else ++ { ++ pattrib->encrypt = 0; ++ pattrib->iv_len = pattrib->icv_len = 0; ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++#ifdef CONFIG_IEEE80211W ++static sint validate_80211w_mgmt(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ u8 type; ++ u8 subtype; ++ ++ type = GetFrameType(ptr); ++ subtype = GetFrameSubType(ptr); //bit(7)~bit(2) ++ ++ //only support station mode ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) ++ && adapter->securitypriv.binstallBIPkey == _TRUE) ++ { ++ //unicast management frame decrypt ++ if(pattrib->privacy && !(IS_MCAST(GetAddr1Ptr(ptr))) && ++ (subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC || subtype == WIFI_ACTION)) ++ { ++ u8 *ppp, *mgmt_DATA; ++ u32 data_len=0; ++ ppp = GetAddr2Ptr(ptr); ++ ++ pattrib->bdecrypted = 0; ++ pattrib->encrypt = _AES_; ++ pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ //set iv and icv length ++ SET_ICE_IV_LEN(pattrib->iv_len, pattrib->icv_len, pattrib->encrypt); ++ _rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN); ++ //actual management data frame body ++ data_len = pattrib->pkt_len - pattrib->hdrlen - pattrib->iv_len - pattrib->icv_len; ++ mgmt_DATA = rtw_zmalloc(data_len); ++ if(mgmt_DATA == NULL) ++ { ++ DBG_871X("%s mgmt allocate fail !!!!!!!!!\n", __FUNCTION__); ++ goto validate_80211w_fail; ++ } ++ /*//dump the packet content before decrypt ++ { ++ int pp; ++ printk("pattrib->pktlen = %d =>", pattrib->pkt_len); ++ for(pp=0;pp< pattrib->pkt_len; pp++) ++ printk(" %02x ", ptr[pp]); ++ printk("\n"); ++ }*/ ++ ++ precv_frame = decryptor(adapter, precv_frame); ++ //save actual management data frame body ++ _rtw_memcpy(mgmt_DATA, ptr+pattrib->hdrlen+pattrib->iv_len, data_len); ++ //overwrite the iv field ++ _rtw_memcpy(ptr+pattrib->hdrlen, mgmt_DATA, data_len); ++ //remove the iv and icv length ++ pattrib->pkt_len = pattrib->pkt_len - pattrib->iv_len - pattrib->icv_len; ++ rtw_mfree(mgmt_DATA, data_len); ++ /*//print packet content after decryption ++ { ++ int pp; ++ printk("after decryption pattrib->pktlen = %d @@=>", pattrib->pkt_len); ++ for(pp=0;pp< pattrib->pkt_len; pp++) ++ printk(" %02x ", ptr[pp]); ++ printk("\n"); ++ }*/ ++ if(!precv_frame) ++ { ++ DBG_871X("%s mgmt descrypt fail !!!!!!!!!\n", __FUNCTION__); ++ goto validate_80211w_fail; ++ } ++ } ++ else if(IS_MCAST(GetAddr1Ptr(ptr)) && ++ (subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC)) ++ { ++ sint BIP_ret = _SUCCESS; ++ //verify BIP MME IE of broadcast/multicast de-auth/disassoc packet ++ BIP_ret = rtw_BIP_verify(adapter, (u8 * )precv_frame); ++ if(BIP_ret == _FAIL) ++ { ++ //DBG_871X("802.11w BIP verify fail\n"); ++ goto validate_80211w_fail; ++ } ++ else if(BIP_ret == RTW_RX_HANDLED) ++ { ++ //DBG_871X("802.11w recv none protected packet\n"); ++ //issue sa query request ++ issue_action_SA_Query(adapter, NULL, 0, 0); ++ goto validate_80211w_fail; ++ } ++ }//802.11w protect ++ else ++ { ++ if(subtype == WIFI_ACTION) ++ { ++ //according 802.11-2012 standard, these five types are not robust types ++ if( ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_PUBLIC && ++ ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_HT && ++ ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_UNPROTECTED_WNM && ++ ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_SELF_PROTECTED && ++ ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_P2P) ++ { ++ DBG_871X("action frame category=%d should robust\n", ptr[WLAN_HDR_A3_LEN]); ++ goto validate_80211w_fail; ++ } ++ } ++ else if(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC) ++ { ++ DBG_871X("802.11w recv none protected packet\n"); ++ //issue sa query request ++ issue_action_SA_Query(adapter, NULL, 0, 0); ++ goto validate_80211w_fail; ++ } ++ } ++ } ++ return _SUCCESS; ++ ++validate_80211w_fail: ++ return _FAIL; ++ ++} ++#endif //CONFIG_IEEE80211W ++ ++sint validate_recv_frame(_adapter *adapter, union recv_frame *precv_frame); ++sint validate_recv_frame(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ //shall check frame subtype, to / from ds, da, bssid ++ ++ //then call check if rx seq/frag. duplicated. ++ ++ u8 type; ++ u8 subtype; ++ sint retval = _SUCCESS; ++ ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ u8 ver =(unsigned char) (*ptr)&0x3 ; ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++#endif ++ ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++#endif //CONFIG_TDLS ++ ++_func_enter_; ++ ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) { ++ int ch_set_idx = rtw_ch_set_search_ch(pmlmeext->channel_set, rtw_get_oper_ch(adapter)); ++ if (ch_set_idx >= 0) ++ pmlmeext->channel_set[ch_set_idx].rx_count++; ++ } ++#endif ++ ++#ifdef CONFIG_TDLS ++ if(ptdlsinfo->ch_sensing==1 && ptdlsinfo->cur_channel !=0){ ++ ptdlsinfo->collect_pkt_num[ptdlsinfo->cur_channel-1]++; ++ } ++#endif //CONFIG_TDLS ++ ++#ifdef RTK_DMP_PLATFORM ++ if ( 0 ) ++ { ++ DBG_871X("++\n"); ++ { ++ int i; ++ for(i=0; i<64;i=i+8) ++ DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:", *(ptr+i), ++ *(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7)); ++ ++ } ++ DBG_871X("--\n"); ++ } ++#endif //RTK_DMP_PLATFORM ++ ++ //add version chk ++ if(ver!=0){ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail! (ver!=0)\n")); ++ retval= _FAIL; ++ goto exit; ++ } ++ ++ type = GetFrameType(ptr); ++ subtype = GetFrameSubType(ptr); //bit(7)~bit(2) ++ ++ pattrib->to_fr_ds = get_tofr_ds(ptr); ++ ++ pattrib->frag_num = GetFragNum(ptr); ++ pattrib->seq_num = GetSequence(ptr); ++ ++ pattrib->pw_save = GetPwrMgt(ptr); ++ pattrib->mfrag = GetMFrag(ptr); ++ pattrib->mdata = GetMData(ptr); ++ pattrib->privacy = GetPrivacy(ptr); ++ pattrib->order = GetOrder(ptr); ++#if 0 //for debug ++ ++if(pHalData->bDumpRxPkt ==1){ ++ int i; ++ DBG_871X("############################# \n"); ++ ++ for(i=0; i<64;i=i+8) ++ DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i), ++ *(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7)); ++ DBG_871X("############################# \n"); ++} ++else if(pHalData->bDumpRxPkt ==2){ ++ if(type== WIFI_MGT_TYPE){ ++ int i; ++ DBG_871X("############################# \n"); ++ ++ for(i=0; i<64;i=i+8) ++ DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i), ++ *(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7)); ++ DBG_871X("############################# \n"); ++ } ++} ++else if(pHalData->bDumpRxPkt ==3){ ++ if(type== WIFI_DATA_TYPE){ ++ int i; ++ DBG_871X("############################# \n"); ++ ++ for(i=0; i<64;i=i+8) ++ DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i), ++ *(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7)); ++ DBG_871X("############################# \n"); ++ } ++} ++ ++#endif ++ switch (type) ++ { ++ case WIFI_MGT_TYPE: //mgnt ++#ifdef CONFIG_IEEE80211W ++ if(validate_80211w_mgmt(adapter, precv_frame) == _FAIL) ++ { ++ retval = _FAIL; ++ break; ++ } ++#endif //CONFIG_IEEE80211W ++ ++ retval = validate_recv_mgnt_frame(adapter, precv_frame); ++ if (retval == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_mgnt_frame fail\n")); ++ } ++ retval = _FAIL; // only data frame return _SUCCESS ++ break; ++ case WIFI_CTRL_TYPE: //ctrl ++ retval = validate_recv_ctrl_frame(adapter, precv_frame); ++ if (retval == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_ctrl_frame fail\n")); ++ } ++ retval = _FAIL; // only data frame return _SUCCESS ++ break; ++ case WIFI_DATA_TYPE: //data ++ rtw_led_control(adapter, LED_CTL_RX); ++ pattrib->qos = (subtype & BIT(7))? 1:0; ++ retval = validate_recv_data_frame(adapter, precv_frame); ++ if (retval == _FAIL) ++ { ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail\n")); ++ precvpriv->rx_drop++; ++ } ++ break; ++ default: ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail! type=0x%x\n", type)); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME validate_recv_data_frame fail! type=0x%x\n", type); ++ #endif ++ retval = _FAIL; ++ break; ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return retval; ++} ++ ++ ++//remove the wlanhdr and add the eth_hdr ++#if 1 ++ ++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe); ++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe) ++{ ++ sint rmv_len; ++ u16 eth_type, len; ++ u8 bsnaphdr; ++ u8 *psnap_type; ++ struct ieee80211_snap_hdr *psnap; ++ ++ sint ret=_SUCCESS; ++ _adapter *adapter =precvframe->u.hdr.adapter; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ ++ u8 *ptr = get_recvframe_data(precvframe) ; // point to frame_ctrl field ++ struct rx_pkt_attrib *pattrib = & precvframe->u.hdr.attrib; ++ ++_func_enter_; ++ ++ if(pattrib->encrypt){ ++ recvframe_pull_tail(precvframe, pattrib->icv_len); ++ } ++ ++ psnap=(struct ieee80211_snap_hdr *)(ptr+pattrib->hdrlen + pattrib->iv_len); ++ psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE; ++ /* convert hdr + possible LLC headers into Ethernet header */ ++ //eth_type = (psnap_type[0] << 8) | psnap_type[1]; ++ if((_rtw_memcmp(psnap, rtw_rfc1042_header, SNAP_SIZE) && ++ (_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2) == _FALSE) && ++ (_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_AARP, 2)==_FALSE) )|| ++ //eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || ++ _rtw_memcmp(psnap, rtw_bridge_tunnel_header, SNAP_SIZE)){ ++ /* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ ++ bsnaphdr = _TRUE; ++ } ++ else { ++ /* Leave Ethernet header part of hdr and full payload */ ++ bsnaphdr = _FALSE; ++ } ++ ++ rmv_len = pattrib->hdrlen + pattrib->iv_len +(bsnaphdr?SNAP_SIZE:0); ++ len = precvframe->u.hdr.len - rmv_len; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n===pattrib->hdrlen: %x, pattrib->iv_len:%x ===\n\n", pattrib->hdrlen, pattrib->iv_len)); ++ ++ _rtw_memcpy(ð_type, ptr+rmv_len, 2); ++ eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type ++ pattrib->eth_type = eth_type; ++ ++ if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)) ++ { ++ ptr += rmv_len ; ++ *ptr = 0x87; ++ *(ptr+1) = 0x12; ++ ++ eth_type = 0x8712; ++ // append rx status for mp test packets ++ ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2)-24); ++ _rtw_memcpy(ptr, get_rxmem(precvframe), 24); ++ ptr+=24; ++ } ++ else { ++ ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+ (bsnaphdr?2:0))); ++ } ++ ++ _rtw_memcpy(ptr, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(ptr+ETH_ALEN, pattrib->src, ETH_ALEN); ++ ++ if(!bsnaphdr) { ++ len = htons(len); ++ _rtw_memcpy(ptr+12, &len, 2); ++ } ++ ++_func_exit_; ++ return ret; ++ ++} ++ ++#else ++ ++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe) ++{ ++ sint rmv_len; ++ u16 eth_type; ++ u8 bsnaphdr; ++ u8 *psnap_type; ++ struct ieee80211_snap_hdr *psnap; ++ ++ sint ret=_SUCCESS; ++ _adapter *adapter =precvframe->u.hdr.adapter; ++ struct mlme_priv *pmlmepriv = &adapter->mlmepriv; ++ ++ u8* ptr = get_recvframe_data(precvframe) ; // point to frame_ctrl field ++ struct rx_pkt_attrib *pattrib = & precvframe->u.hdr.attrib; ++ struct _vlan *pvlan = NULL; ++ ++_func_enter_; ++ ++ psnap=(struct ieee80211_snap_hdr *)(ptr+pattrib->hdrlen + pattrib->iv_len); ++ psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE; ++ if (psnap->dsap==0xaa && psnap->ssap==0xaa && psnap->ctrl==0x03) ++ { ++ if (_rtw_memcmp(psnap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN)) ++ bsnaphdr=_TRUE;//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_RFC1042; ++ else if (_rtw_memcmp(psnap->oui, SNAP_HDR_APPLETALK_DDP, WLAN_IEEE_OUI_LEN) && ++ _rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_DDP, 2) ) ++ bsnaphdr=_TRUE; //wlan_pkt_format = WLAN_PKT_FORMAT_APPLETALK; ++ else if (_rtw_memcmp( psnap->oui, oui_8021h, WLAN_IEEE_OUI_LEN)) ++ bsnaphdr=_TRUE; //wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_TUNNEL; ++ else { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("drop pkt due to invalid frame format!\n")); ++ ret= _FAIL; ++ goto exit; ++ } ++ ++ } else ++ bsnaphdr=_FALSE;//wlan_pkt_format = WLAN_PKT_FORMAT_OTHERS; ++ ++ rmv_len = pattrib->hdrlen + pattrib->iv_len +(bsnaphdr?SNAP_SIZE:0); ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("===pattrib->hdrlen: %x, pattrib->iv_len:%x ===\n", pattrib->hdrlen, pattrib->iv_len)); ++ ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ { ++ ptr += rmv_len ; ++ *ptr = 0x87; ++ *(ptr+1) = 0x12; ++ ++ //back to original pointer ++ ptr -= rmv_len; ++ } ++ ++ ptr += rmv_len ; ++ ++ _rtw_memcpy(ð_type, ptr, 2); ++ eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type ++ ptr +=2; ++ ++ if(pattrib->encrypt){ ++ recvframe_pull_tail(precvframe, pattrib->icv_len); ++ } ++ ++ if(eth_type == 0x8100) //vlan ++ { ++ pvlan = (struct _vlan *) ptr; ++ ++ //eth_type = get_vlan_encap_proto(pvlan); ++ //eth_type = pvlan->h_vlan_encapsulated_proto;//? ++ rmv_len += 4; ++ ptr+=4; ++ } ++ ++ if(eth_type==0x0800)//ip ++ { ++ //struct iphdr* piphdr = (struct iphdr*) ptr; ++ //__u8 tos = (unsigned char)(pattrib->priority & 0xff); ++ ++ //piphdr->tos = tos; ++ ++ //if (piphdr->protocol == 0x06) ++ //{ ++ // RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("@@@===recv tcp len:%d @@@===\n", precvframe->u.hdr.len)); ++ //} ++ } ++ else if(eth_type==0x8712)// append rx status for mp test packets ++ { ++ //ptr -= 16; ++ //_rtw_memcpy(ptr, get_rxmem(precvframe), 16); ++ } ++ else ++ { ++#ifdef PLATFORM_OS_XP ++ NDIS_PACKET_8021Q_INFO VlanPriInfo; ++ UINT32 UserPriority = precvframe->u.hdr.attrib.priority; ++ UINT32 VlanID = (pvlan!=NULL ? get_vlan_id(pvlan) : 0 ); ++ ++ VlanPriInfo.Value = // Get current value. ++ NDIS_PER_PACKET_INFO_FROM_PACKET(precvframe->u.hdr.pkt, Ieee8021QInfo); ++ ++ VlanPriInfo.TagHeader.UserPriority = UserPriority; ++ VlanPriInfo.TagHeader.VlanId = VlanID ; ++ ++ VlanPriInfo.TagHeader.CanonicalFormatId = 0; // Should be zero. ++ VlanPriInfo.TagHeader.Reserved = 0; // Should be zero. ++ NDIS_PER_PACKET_INFO_FROM_PACKET(precvframe->u.hdr.pkt, Ieee8021QInfo) = VlanPriInfo.Value; ++#endif ++ } ++ ++ if(eth_type==0x8712)// append rx status for mp test packets ++ { ++ ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2)-24); ++ _rtw_memcpy(ptr, get_rxmem(precvframe), 24); ++ ptr+=24; ++ } ++ else ++ ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2)); ++ ++ _rtw_memcpy(ptr, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(ptr+ETH_ALEN, pattrib->src, ETH_ALEN); ++ ++ eth_type = htons((unsigned short)eth_type) ; ++ _rtw_memcpy(ptr+12, ð_type, 2); ++ ++exit: ++ ++_func_exit_; ++ ++ return ret; ++} ++#endif ++ ++ ++#ifdef CONFIG_SDIO_HCI ++#ifdef PLATFORM_LINUX ++static void recvframe_expand_pkt( ++ PADAPTER padapter, ++ union recv_frame *prframe) ++{ ++ struct recv_frame_hdr *pfhdr; ++ _pkt *ppkt; ++ u8 shift_sz; ++ u32 alloc_sz; ++ ++ ++ pfhdr = &prframe->u.hdr; ++ ++ // 6 is for IP header 8 bytes alignment in QoS packet case. ++ if (pfhdr->attrib.qos) ++ shift_sz = 6; ++ else ++ shift_sz = 0; ++ ++ // for first fragment packet, need to allocate ++ // (1536 + RXDESC_SIZE + drvinfo_sz) to reassemble packet ++ // 8 is for skb->data 8 bytes alignment. ++// alloc_sz = _RND(1536 + RXDESC_SIZE + pfhdr->attrib.drvinfosize + shift_sz + 8, 128); ++ alloc_sz = 1664; // round (1536 + 24 + 32 + shift_sz + 8) to 128 bytes alignment ++ ++ //3 1. alloc new skb ++ // prepare extra space for 4 bytes alignment ++ ppkt = rtw_skb_alloc(alloc_sz); ++ ++ if (!ppkt) return; // no way to expand ++ ++ //3 2. Prepare new skb to replace & release old skb ++ // force ppkt->data at 8-byte alignment address ++ skb_reserve(ppkt, 8 - ((SIZE_PTR)ppkt->data & 7)); ++ // force ip_hdr at 8-byte alignment address according to shift_sz ++ skb_reserve(ppkt, shift_sz); ++ ++ // copy data to new pkt ++ _rtw_memcpy(skb_put(ppkt, pfhdr->len), pfhdr->rx_data, pfhdr->len); ++ ++ rtw_skb_free(pfhdr->pkt); ++ ++ // attach new pkt to recvframe ++ pfhdr->pkt = ppkt; ++ pfhdr->rx_head = ppkt->head; ++ pfhdr->rx_data = ppkt->data; ++ pfhdr->rx_tail = skb_tail_pointer(ppkt); ++ pfhdr->rx_end = skb_end_pointer(ppkt); ++} ++#else ++#warning "recvframe_expand_pkt not implement, defrag may crash system" ++#endif ++#endif ++ ++//perform defrag ++union recv_frame * recvframe_defrag(_adapter *adapter,_queue *defrag_q); ++union recv_frame * recvframe_defrag(_adapter *adapter,_queue *defrag_q) ++{ ++ _list *plist, *phead; ++ u8 *data,wlanhdr_offset; ++ u8 curfragnum; ++ struct recv_frame_hdr *pfhdr,*pnfhdr; ++ union recv_frame* prframe, *pnextrframe; ++ _queue *pfree_recv_queue; ++ ++_func_enter_; ++ ++ curfragnum=0; ++ pfree_recv_queue=&adapter->recvpriv.free_recv_queue; ++ ++ phead = get_list_head(defrag_q); ++ plist = get_next(phead); ++ prframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ pfhdr=&prframe->u.hdr; ++ rtw_list_delete(&(prframe->u.list)); ++ ++ if(curfragnum!=pfhdr->attrib.frag_num) ++ { ++ //the first fragment number must be 0 ++ //free the whole queue ++ rtw_free_recvframe(prframe, pfree_recv_queue); ++ rtw_free_recvframe_queue(defrag_q, pfree_recv_queue); ++ ++ return NULL; ++ } ++ ++#ifdef CONFIG_SDIO_HCI ++ recvframe_expand_pkt(adapter, prframe); ++#endif ++ ++ curfragnum++; ++ ++ plist= get_list_head(defrag_q); ++ ++ plist = get_next(plist); ++ ++ data=get_recvframe_data(prframe); ++ ++ while(rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ pnextrframe = LIST_CONTAINOR(plist, union recv_frame , u); ++ pnfhdr=&pnextrframe->u.hdr; ++ ++ ++ //check the fragment sequence (2nd ~n fragment frame) ++ ++ if(curfragnum!=pnfhdr->attrib.frag_num) ++ { ++ //the fragment number must be increasing (after decache) ++ //release the defrag_q & prframe ++ rtw_free_recvframe(prframe, pfree_recv_queue); ++ rtw_free_recvframe_queue(defrag_q, pfree_recv_queue); ++ return NULL; ++ } ++ ++ curfragnum++; ++ ++ //copy the 2nd~n fragment frame's payload to the first fragment ++ //get the 2nd~last fragment frame's payload ++ ++ wlanhdr_offset = pnfhdr->attrib.hdrlen + pnfhdr->attrib.iv_len; ++ ++ recvframe_pull(pnextrframe, wlanhdr_offset); ++ ++ //append to first fragment frame's tail (if privacy frame, pull the ICV) ++ recvframe_pull_tail(prframe, pfhdr->attrib.icv_len); ++ ++ //memcpy ++ _rtw_memcpy(pfhdr->rx_tail, pnfhdr->rx_data, pnfhdr->len); ++ ++ recvframe_put(prframe, pnfhdr->len); ++ ++ pfhdr->attrib.icv_len=pnfhdr->attrib.icv_len; ++ plist = get_next(plist); ++ ++ }; ++ ++ //free the defrag_q queue and return the prframe ++ rtw_free_recvframe_queue(defrag_q, pfree_recv_queue); ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Performance defrag!!!!!\n")); ++ ++_func_exit_; ++ ++ return prframe; ++} ++ ++//check if need to defrag, if needed queue the frame to defrag_q ++union recv_frame* recvframe_chk_defrag(PADAPTER padapter, union recv_frame *precv_frame) ++{ ++ u8 ismfrag; ++ u8 fragnum; ++ u8 *psta_addr; ++ struct recv_frame_hdr *pfhdr; ++ struct sta_info *psta; ++ struct sta_priv *pstapriv; ++ _list *phead; ++ union recv_frame *prtnframe = NULL; ++ _queue *pfree_recv_queue, *pdefrag_q; ++ ++_func_enter_; ++ ++ pstapriv = &padapter->stapriv; ++ ++ pfhdr = &precv_frame->u.hdr; ++ ++ pfree_recv_queue = &padapter->recvpriv.free_recv_queue; ++ ++ //need to define struct of wlan header frame ctrl ++ ismfrag = pfhdr->attrib.mfrag; ++ fragnum = pfhdr->attrib.frag_num; ++ ++ psta_addr = pfhdr->attrib.ta; ++ psta = rtw_get_stainfo(pstapriv, psta_addr); ++ if (psta == NULL) ++ { ++ u8 type = GetFrameType(pfhdr->rx_data); ++ if (type != WIFI_DATA_TYPE) { ++ psta = rtw_get_bcmc_stainfo(padapter); ++ pdefrag_q = &psta->sta_recvpriv.defrag_q; ++ } else ++ pdefrag_q = NULL; ++ } ++ else ++ pdefrag_q = &psta->sta_recvpriv.defrag_q; ++ ++ if ((ismfrag==0) && (fragnum==0)) ++ { ++ prtnframe = precv_frame;//isn't a fragment frame ++ } ++ ++ if (ismfrag==1) ++ { ++ //0~(n-1) fragment frame ++ //enqueue to defraf_g ++ if(pdefrag_q != NULL) ++ { ++ if(fragnum==0) ++ { ++ //the first fragment ++ if(_rtw_queue_empty(pdefrag_q) == _FALSE) ++ { ++ //free current defrag_q ++ rtw_free_recvframe_queue(pdefrag_q, pfree_recv_queue); ++ } ++ } ++ ++ ++ //Then enqueue the 0~(n-1) fragment into the defrag_q ++ ++ //_rtw_spinlock(&pdefrag_q->lock); ++ phead = get_list_head(pdefrag_q); ++ rtw_list_insert_tail(&pfhdr->list, phead); ++ //_rtw_spinunlock(&pdefrag_q->lock); ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Enqueuq: ismfrag = %d, fragnum= %d\n", ismfrag,fragnum)); ++ ++ prtnframe=NULL; ++ ++ } ++ else ++ { ++ //can't find this ta's defrag_queue, so free this recv_frame ++ rtw_free_recvframe(precv_frame, pfree_recv_queue); ++ prtnframe=NULL; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("Free because pdefrag_q ==NULL: ismfrag = %d, fragnum= %d\n", ismfrag, fragnum)); ++ } ++ ++ } ++ ++ if((ismfrag==0)&&(fragnum!=0)) ++ { ++ //the last fragment frame ++ //enqueue the last fragment ++ if(pdefrag_q != NULL) ++ { ++ //_rtw_spinlock(&pdefrag_q->lock); ++ phead = get_list_head(pdefrag_q); ++ rtw_list_insert_tail(&pfhdr->list,phead); ++ //_rtw_spinunlock(&pdefrag_q->lock); ++ ++ //call recvframe_defrag to defrag ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("defrag: ismfrag = %d, fragnum= %d\n", ismfrag, fragnum)); ++ precv_frame = recvframe_defrag(padapter, pdefrag_q); ++ prtnframe=precv_frame; ++ ++ } ++ else ++ { ++ //can't find this ta's defrag_queue, so free this recv_frame ++ rtw_free_recvframe(precv_frame, pfree_recv_queue); ++ prtnframe=NULL; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("Free because pdefrag_q ==NULL: ismfrag = %d, fragnum= %d\n", ismfrag,fragnum)); ++ } ++ ++ } ++ ++ ++ if((prtnframe!=NULL)&&(prtnframe->u.hdr.attrib.privacy)) ++ { ++ //after defrag we must check tkip mic code ++ if(recvframe_chkmic(padapter, prtnframe)==_FAIL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic(padapter, prtnframe)==_FAIL\n")); ++ rtw_free_recvframe(prtnframe,pfree_recv_queue); ++ prtnframe=NULL; ++ } ++ } ++ ++_func_exit_; ++ ++ return prtnframe; ++ ++} ++ ++#define ENDIAN_FREE 1 ++ ++int amsdu_to_msdu(_adapter *padapter, union recv_frame *prframe); ++int amsdu_to_msdu(_adapter *padapter, union recv_frame *prframe) ++{ ++#if defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD) //for amsdu TP improvement,Creator: Thomas ++ int a_len, padding_len; ++ u16 eth_type, nSubframe_Length; ++ u8 nr_subframes, i; ++ unsigned char *pdata; ++ struct rx_pkt_attrib *pattrib; ++#ifndef PLATFORM_FREEBSD ++ unsigned char *data_ptr; ++ _pkt *sub_skb,*subframes[MAX_SUBFRAME_COUNT]; ++#endif //PLATFORM_FREEBSD ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &(precvpriv->free_recv_queue); ++ int ret = _SUCCESS; ++#ifdef PLATFORM_FREEBSD ++ struct mbuf *sub_m=NULL, *subframes[MAX_SUBFRAME_COUNT]; ++ u8 *ptr,offset; ++#endif //PLATFORM_FREEBSD ++ nr_subframes = 0; ++ ++ pattrib = &prframe->u.hdr.attrib; ++ ++ recvframe_pull(prframe, prframe->u.hdr.attrib.hdrlen); ++ ++ if(prframe->u.hdr.attrib.iv_len >0) ++ { ++ recvframe_pull(prframe, prframe->u.hdr.attrib.iv_len); ++ } ++ ++ a_len = prframe->u.hdr.len; ++ ++ pdata = prframe->u.hdr.rx_data; ++ ++ while(a_len > ETH_HLEN) { ++ ++ /* Offset 12 denote 2 mac address */ ++#ifdef ENDIAN_FREE ++ //nSubframe_Length = ntohs(*((u16*)(pdata + 12))); ++ nSubframe_Length = RTW_GET_BE16(pdata + 12); ++#else // ENDIAN_FREE ++ nSubframe_Length = *((u16*)(pdata + 12)); ++ //==m==>change the length order ++ nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8); ++ //ntohs(nSubframe_Length); ++#endif // ENDIAN_FREE ++ ++ if( a_len < (ETHERNET_HEADER_SIZE + nSubframe_Length) ) { ++ DBG_871X("nRemain_Length is %d and nSubframe_Length is : %d\n",a_len,nSubframe_Length); ++ goto exit; ++ } ++ ++#ifndef PLATFORM_FREEBSD ++ /* move the data point to data content */ ++ pdata += ETH_HLEN; ++ a_len -= ETH_HLEN; ++ ++ /* Allocate new skb for releasing to upper layer */ ++#ifdef CONFIG_SKB_COPY ++ sub_skb = rtw_skb_alloc(nSubframe_Length + 12); ++ if(sub_skb) ++ { ++ skb_reserve(sub_skb, 12); ++ data_ptr = (u8 *)skb_put(sub_skb, nSubframe_Length); ++ _rtw_memcpy(data_ptr, pdata, nSubframe_Length); ++ } ++ else ++#endif // CONFIG_SKB_COPY ++ { ++ sub_skb = rtw_skb_clone(prframe->u.hdr.pkt); ++ if(sub_skb) ++ { ++ sub_skb->data = pdata; ++ sub_skb->len = nSubframe_Length; ++ skb_set_tail_pointer(sub_skb, nSubframe_Length); ++ } ++ else ++ { ++ DBG_871X("rtw_skb_clone() Fail!!! , nr_subframes = %d\n",nr_subframes); ++ break; ++ } ++ } ++ ++#else // PLATFORM_FREEBSD ++ ++ //PLATFORM_FREEBSD ++ //Allocate a mbuff, ++ //sub_m =m_devget(pdata, nSubframe_Length+12, 12, padapter->pifp,NULL); ++ sub_m =m_devget(pdata, nSubframe_Length+ETH_HLEN, ETHER_ALIGN, padapter->pifp,NULL); ++ ++ pdata += ETH_HLEN; ++ a_len -= ETH_HLEN; ++#endif // PLATFORM_FREEBSD ++ ++#ifndef PLATFORM_FREEBSD ++ //sub_skb->dev = padapter->pnetdev; ++ subframes[nr_subframes++] = sub_skb; ++#else //PLATFORM_FREEBSD ++ //PLATFORM_FREEBSD ++ subframes[nr_subframes++] = sub_m; ++#endif //PLATFORM_FREEBSD ++ ++ if(nr_subframes >= MAX_SUBFRAME_COUNT) { ++ DBG_871X("ParseSubframe(): Too many Subframes! Packets dropped!\n"); ++ break; ++ } ++ ++ pdata += nSubframe_Length; ++ a_len -= nSubframe_Length; ++ if(a_len != 0) { ++ padding_len = 4 - ((nSubframe_Length + ETH_HLEN) & (4-1)); ++ if(padding_len == 4) { ++ padding_len = 0; ++ } ++ ++ if(a_len < padding_len) { ++ goto exit; ++ } ++ pdata += padding_len; ++ a_len -= padding_len; ++ } ++ } ++ ++ for(i=0; idata[6]); ++ eth_type = RTW_GET_BE16(&sub_skb->data[6]); ++#else // ENDIAN_FREE ++ eth_type = (sub_skb->data[6] << 8) | sub_skb->data[7]; ++#endif // ENDIAN_FREE ++ if (sub_skb->len >= 8 && ++ ((_rtw_memcmp(sub_skb->data, rtw_rfc1042_header, SNAP_SIZE) && ++ eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || ++ _rtw_memcmp(sub_skb->data, rtw_bridge_tunnel_header, SNAP_SIZE) )) { ++ /* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ ++ skb_pull(sub_skb, SNAP_SIZE); ++ _rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN); ++ _rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN); ++ } else { ++ u16 len; ++ /* Leave Ethernet header part of hdr and full payload */ ++ len = htons(sub_skb->len); ++ _rtw_memcpy(skb_push(sub_skb, 2), &len, 2); ++ _rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN); ++ _rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN); ++ } ++ ++ /* Indicat the packets to upper layer */ ++ if (sub_skb) { ++ //memset(sub_skb->cb, 0, sizeof(sub_skb->cb)); ++ ++#ifdef CONFIG_BR_EXT ++ // Insert NAT2.5 RX here! ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ void *br_port = NULL; ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ br_port = padapter->pnetdev->br_port; ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++ br_port = rcu_dereference(padapter->pnetdev->rx_handler_data); ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ ++ ++ if( br_port && (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ) ++ { ++ int nat25_handle_frame(_adapter *priv, struct sk_buff *skb); ++ if (nat25_handle_frame(padapter, sub_skb) == -1) { ++ //priv->ext_stats.rx_data_drops++; ++ //DEBUG_ERR("RX DROP: nat25_handle_frame fail!\n"); ++ //return FAIL; ++ ++#if 1 ++ // bypass this frame to upper layer!! ++#else ++ rtw_skb_free(sub_skb); ++ continue; ++#endif ++ } ++ } ++#endif // CONFIG_BR_EXT ++ ++ sub_skb->protocol = eth_type_trans(sub_skb, padapter->pnetdev); ++ sub_skb->dev = padapter->pnetdev; ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX ++ if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) { ++ sub_skb->ip_summed = CHECKSUM_UNNECESSARY; ++ } else { ++ sub_skb->ip_summed = CHECKSUM_NONE; ++ } ++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */ ++ sub_skb->ip_summed = CHECKSUM_NONE; ++#endif //CONFIG_TCP_CSUM_OFFLOAD_RX ++ ++ rtw_netif_rx(padapter->pnetdev, sub_skb); ++ } ++#else //PLATFORM_FREEBSD ++ ++ //PLATFORM_FREEBSD ++ sub_m = subframes[i]; ++ ptr=mtod(sub_m, u8 *); ++ offset=ETH_HLEN; ++ /* convert hdr + possible LLC headers into Ethernet header */ ++#ifdef ENDIAN_FREE ++ eth_type = ntohs(*(u16*)&ptr[offset+6]); ++#else // ENDIAN_FREE ++ eth_type = ( ptr[offset+6] << 8) | ptr[offset+7]; ++#endif // ENDIAN_FREE ++ if (sub_m->m_pkthdr.len >= ETH_HLEN+8 && ++ ((_rtw_memcmp(ptr+ETH_HLEN, rtw_rfc1042_header, SNAP_SIZE) && ++ eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || ++ _rtw_memcmp(ptr+ETH_HLEN, rtw_bridge_tunnel_header, SNAP_SIZE) )) { ++ /* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ ++ offset+=SNAP_SIZE; ++ _rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->src, ETH_ALEN); ++ offset-=ETH_ALEN; ++ _rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->dst, ETH_ALEN); ++ offset-=ETH_ALEN; ++ } else { ++ u16 len; ++ /* Leave Ethernet header part of hdr and full payload */ ++ len = htons(sub_m->m_pkthdr.len-offset); ++ _rtw_memcpy(&ptr[offset- 2], &len, 2); ++ offset-=2; ++ _rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->src, ETH_ALEN); ++ offset-=ETH_ALEN; ++ _rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->dst, ETH_ALEN); ++ offset-=ETH_ALEN; ++ } ++ ++ m_adj(sub_m,offset); ++ ++ /* Indicat the packets to upper layer */ ++ if (sub_m) { ++ ++#if 0 ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX ++ if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) { ++ sub_skb->ip_summed = CHECKSUM_UNNECESSARY; ++ } else { ++ sub_skb->ip_summed = CHECKSUM_NONE; ++ } ++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */ ++ sub_skb->ip_summed = CHECKSUM_NONE; ++#endif //CONFIG_TCP_CSUM_OFFLOAD_RX ++#endif //0 ++ ++ if ( ((u32)(mtod(sub_m, caddr_t) + 14) % 4) != 0) ++ printf("%s()-%d: mtod(sub_m) = %p\n", __FUNCTION__, __LINE__, mtod(sub_m, caddr_t)); ++#ifdef CONFIG_RX_INDICATE_QUEUE ++ IF_ENQUEUE(&precvpriv->rx_indicate_queue, sub_m); ++ if (_IF_QLEN(&precvpriv->rx_indicate_queue) <= 1) { ++ taskqueue_enqueue(taskqueue_thread, &precvpriv->rx_indicate_tasklet); ++ } ++#else // CONFIG_RX_INDICATE_QUEUE ++ (*padapter->pifp->if_input)(padapter->pifp, sub_m); ++#endif // CONFIG_RX_INDICATE_QUEUE ++ } ++ ++#endif //PLATFORM_FREEBSD ++ } ++ ++exit: ++ ++ prframe->u.hdr.len=0; ++ rtw_free_recvframe(prframe, pfree_recv_queue);//free this recv_frame ++ ++ return ret; ++#else // || defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD) ++#ifdef PLATFORM_WINDOWS ++ _irqL irql; ++#endif //PLATFORM_WINDOWS ++ unsigned char *ptr, *pdata, *pbuf, *psnap_type; ++ union recv_frame *pnrframe, *pnrframe_new; ++ int a_len, mv_len, padding_len; ++ u16 eth_type, type_len; ++ u8 bsnaphdr; ++ struct ieee80211_snap_hdr *psnap; ++ struct _vlan *pvlan; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &(precvpriv->free_recv_queue); ++ int ret = _SUCCESS; ++#ifdef PLATFORM_WINDOWS ++ struct recv_buf *precvbuf = prframe->u.hdr.precvbuf; ++#endif //PLATFORM_WINDOWS ++ a_len = prframe->u.hdr.len - prframe->u.hdr.attrib.hdrlen; ++ ++ recvframe_pull(prframe, prframe->u.hdr.attrib.hdrlen); ++ ++ if(prframe->u.hdr.attrib.iv_len >0) ++ { ++ recvframe_pull(prframe, prframe->u.hdr.attrib.iv_len); ++ } ++ ++ pdata = prframe->u.hdr.rx_data; ++ ++ prframe->u.hdr.len=0; ++ ++ pnrframe = prframe; ++ ++ ++ do{ ++ ++ mv_len=0; ++ pnrframe->u.hdr.rx_data = pnrframe->u.hdr.rx_tail = pdata; ++ ptr = pdata; ++ ++ ++ _rtw_memcpy(pnrframe->u.hdr.attrib.dst, ptr, ETH_ALEN); ++ ptr+=ETH_ALEN; ++ _rtw_memcpy(pnrframe->u.hdr.attrib.src, ptr, ETH_ALEN); ++ ptr+=ETH_ALEN; ++ ++ _rtw_memcpy(&type_len, ptr, 2); ++ type_len= ntohs((unsigned short )type_len); ++ ptr +=2; ++ mv_len += ETH_HLEN; ++ ++ recvframe_put(pnrframe, type_len+ETH_HLEN);//update tail; ++ ++ if(pnrframe->u.hdr.rx_data >= pnrframe->u.hdr.rx_tail || type_len<8) ++ { ++ //panic("pnrframe->u.hdr.rx_data >= pnrframe->u.hdr.rx_tail || type_len<8\n"); ++ ++ rtw_free_recvframe(pnrframe, pfree_recv_queue); ++ ++ goto exit; ++ } ++ ++ psnap=(struct ieee80211_snap_hdr *)(ptr); ++ psnap_type=ptr+SNAP_SIZE; ++ if (psnap->dsap==0xaa && psnap->ssap==0xaa && psnap->ctrl==0x03) ++ { ++ if ( _rtw_memcmp(psnap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN)) ++ { ++ bsnaphdr=_TRUE;//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_RFC1042; ++ } ++ else if (_rtw_memcmp(psnap->oui, SNAP_HDR_APPLETALK_DDP, WLAN_IEEE_OUI_LEN) && ++ _rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_DDP, 2) ) ++ { ++ bsnaphdr=_TRUE; //wlan_pkt_format = WLAN_PKT_FORMAT_APPLETALK; ++ } ++ else if (_rtw_memcmp( psnap->oui, oui_8021h, WLAN_IEEE_OUI_LEN)) ++ { ++ bsnaphdr=_TRUE; //wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_TUNNEL; ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("drop pkt due to invalid frame format!\n")); ++ ++ //KeBugCheckEx(0x87123333, 0xe0, 0x4c, 0x87, 0xdd); ++ ++ //panic("0x87123333, 0xe0, 0x4c, 0x87, 0xdd\n"); ++ ++ rtw_free_recvframe(pnrframe, pfree_recv_queue); ++ ++ goto exit; ++ } ++ ++ } ++ else ++ { ++ bsnaphdr=_FALSE;//wlan_pkt_format = WLAN_PKT_FORMAT_OTHERS; ++ } ++ ++ ptr += (bsnaphdr?SNAP_SIZE:0); ++ _rtw_memcpy(ð_type, ptr, 2); ++ eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type ++ ++ mv_len+= 2+(bsnaphdr?SNAP_SIZE:0); ++ ptr += 2;//now move to iphdr; ++ ++ pvlan = NULL; ++ if(eth_type == 0x8100) //vlan ++ { ++ pvlan = (struct _vlan *)ptr; ++ ptr+=4; ++ mv_len+=4; ++ } ++ ++ if(eth_type==0x0800)//ip ++ { ++ struct iphdr* piphdr = (struct iphdr*)ptr; ++ ++ ++ if (piphdr->protocol == 0x06) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("@@@===recv tcp len:%d @@@===\n", pnrframe->u.hdr.len)); ++ } ++ } ++#ifdef PLATFORM_OS_XP ++ else ++ { ++ NDIS_PACKET_8021Q_INFO VlanPriInfo; ++ UINT32 UserPriority = pnrframe->u.hdr.attrib.priority; ++ UINT32 VlanID = (pvlan!=NULL ? get_vlan_id(pvlan) : 0 ); ++ ++ VlanPriInfo.Value = // Get current value. ++ NDIS_PER_PACKET_INFO_FROM_PACKET(pnrframe->u.hdr.pkt, Ieee8021QInfo); ++ ++ VlanPriInfo.TagHeader.UserPriority = UserPriority; ++ VlanPriInfo.TagHeader.VlanId = VlanID; ++ ++ VlanPriInfo.TagHeader.CanonicalFormatId = 0; // Should be zero. ++ VlanPriInfo.TagHeader.Reserved = 0; // Should be zero. ++ NDIS_PER_PACKET_INFO_FROM_PACKET(pnrframe->u.hdr.pkt, Ieee8021QInfo) = VlanPriInfo.Value; ++ ++ } ++#endif //PLATFORM_OS_XP ++ ++ pbuf = recvframe_pull(pnrframe, (mv_len-sizeof(struct ethhdr))); ++ ++ _rtw_memcpy(pbuf, pnrframe->u.hdr.attrib.dst, ETH_ALEN); ++ _rtw_memcpy(pbuf+ETH_ALEN, pnrframe->u.hdr.attrib.src, ETH_ALEN); ++ ++ eth_type = htons((unsigned short)eth_type) ; ++ _rtw_memcpy(pbuf+12, ð_type, 2); ++ ++ padding_len = (4) - ((type_len + ETH_HLEN)&(4-1)); ++ ++ a_len -= (type_len + ETH_HLEN + padding_len) ; ++ ++ ++#if 0 ++ ++ if(a_len > ETH_HLEN) ++ { ++ pnrframe_new = rtw_alloc_recvframe(pfree_recv_queue); ++ if(pnrframe_new) ++ { ++ _pkt *pskb_copy; ++ unsigned int copy_len = pnrframe->u.hdr.len; ++ ++ _rtw_init_listhead(&pnrframe_new->u.hdr.list); ++ ++ pskb_copy = rtw_skb_alloc(copy_len+64); ++ ++ if(pskb_copy==NULL) ++ { ++ DBG_871X("amsdu_to_msdu:can not all(ocate memory for skb copy\n"); ++ } ++ ++ pnrframe_new->u.hdr.pkt = pskb_copy; ++ ++ _rtw_memcpy(pskb_copy->data, pnrframe->u.hdr.rx_data, copy_len); ++ ++ pnrframe_new->u.hdr.rx_data = pnrframe->u.hdr.rx_data; ++ pnrframe_new->u.hdr.rx_tail = pnrframe->u.hdr.rx_data + copy_len; ++ ++ ++ if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE)) ++ { ++ rtw_recv_indicatepkt(padapter, pnrframe_new);//indicate this recv_frame ++ } ++ else ++ { ++ rtw_free_recvframe(pnrframe_new, pfree_recv_queue);//free this recv_frame ++ } ++ ++ } ++ else ++ { ++ DBG_871X("amsdu_to_msdu:can not allocate memory for pnrframe_new\n"); ++ } ++ ++ } ++ else ++ { ++ if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE)) ++ { ++ rtw_recv_indicatepkt(padapter, pnrframe);//indicate this recv_frame ++ } ++ else ++ { ++ rtw_free_recvframe(pnrframe, pfree_recv_queue);//free this recv_frame ++ } ++ ++ pnrframe = NULL; ++ ++ } ++ ++#else // 0 ++ ++ //padding_len = (4) - ((type_len + ETH_HLEN)&(4-1)); ++ ++ //a_len -= (type_len + ETH_HLEN + padding_len) ; ++ ++ pnrframe_new = NULL; ++ ++ ++ if(a_len > ETH_HLEN) ++ { ++ pnrframe_new = rtw_alloc_recvframe(pfree_recv_queue); ++ ++ if(pnrframe_new) ++ { ++ ++ ++ //pnrframe_new->u.hdr.precvbuf = precvbuf;//precvbuf is assigned before call rtw_init_recvframe() ++ //rtw_init_recvframe(pnrframe_new, precvpriv); ++ { ++#ifdef PLATFORM_LINUX ++ _pkt *pskb = pnrframe->u.hdr.pkt; ++#endif //PLATFORM_LINUX ++ _rtw_init_listhead(&pnrframe_new->u.hdr.list); ++ ++ pnrframe_new->u.hdr.len=0; ++ ++#ifdef PLATFORM_LINUX ++ if(pskb) ++ { ++ pnrframe_new->u.hdr.pkt = rtw_skb_clone(pskb); ++ } ++#endif //PLATFORM_LINUX ++ ++ } ++ ++ pdata += (type_len + ETH_HLEN + padding_len); ++ pnrframe_new->u.hdr.rx_head = pnrframe_new->u.hdr.rx_data = pnrframe_new->u.hdr.rx_tail = pdata; ++ pnrframe_new->u.hdr.rx_end = pdata + a_len + padding_len;// ++ ++#ifdef PLATFORM_WINDOWS ++ pnrframe_new->u.hdr.precvbuf=precvbuf; ++ _enter_critical_bh(&precvbuf->recvbuf_lock, &irql); ++ precvbuf->ref_cnt++; ++ _exit_critical_bh(&precvbuf->recvbuf_lock, &irql); ++#endif //PLATFORM_WINDOWS ++ ++ } ++ else ++ { ++ //panic("pnrframe_new=%x\n", pnrframe_new); ++ } ++ } ++ ++ ++ if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE) ) ++ { ++ rtw_recv_indicatepkt(padapter, pnrframe);//indicate this recv_frame ++ } ++ else ++ { ++ rtw_free_recvframe(pnrframe, pfree_recv_queue);//free this recv_frame ++ } ++ ++ ++ pnrframe = NULL; ++ if(pnrframe_new) ++ { ++ pnrframe = pnrframe_new; ++ } ++ ++ ++#endif // end defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD) ++ ++ }while(pnrframe); ++ ++exit: ++ ++ return ret; ++#endif ++} ++ ++int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl, u16 seq_num); ++int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl, u16 seq_num) ++{ ++ u8 wsize = preorder_ctrl->wsize_b; ++ u16 wend = (preorder_ctrl->indicate_seq + wsize -1) & 0xFFF;//% 4096; ++ ++ // Rx Reorder initialize condition. ++ if (preorder_ctrl->indicate_seq == 0xFFFF) ++ { ++ preorder_ctrl->indicate_seq = seq_num; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d init IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, seq_num); ++ #endif ++ ++ //DbgPrint("check_indicate_seq, 1st->indicate_seq=%d\n", precvpriv->indicate_seq); ++ } ++ ++ //DbgPrint("enter->check_indicate_seq(): IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num); ++ ++ // Drop out the packet which SeqNum is smaller than WinStart ++ if( SN_LESS(seq_num, preorder_ctrl->indicate_seq) ) ++ { ++ //RT_TRACE(COMP_RX_REORDER, DBG_LOUD, ("CheckRxTsIndicateSeq(): Packet Drop! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, NewSeqNum)); ++ //DbgPrint("CheckRxTsIndicateSeq(): Packet Drop! IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num); ++ ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("%s IndicateSeq: %d > NewSeq: %d\n", __FUNCTION__, ++ preorder_ctrl->indicate_seq, seq_num); ++ #endif ++ ++ ++ return _FALSE; ++ } ++ ++ // ++ // Sliding window manipulation. Conditions includes: ++ // 1. Incoming SeqNum is equal to WinStart =>Window shift 1 ++ // 2. Incoming SeqNum is larger than the WinEnd => Window shift N ++ // ++ if( SN_EQUAL(seq_num, preorder_ctrl->indicate_seq) ) ++ { ++ preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1) & 0xFFF; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d SN_EQUAL IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, seq_num); ++ #endif ++ } ++ else if(SN_LESS(wend, seq_num)) ++ { ++ //RT_TRACE(COMP_RX_REORDER, DBG_LOUD, ("CheckRxTsIndicateSeq(): Window Shift! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, NewSeqNum)); ++ //DbgPrint("CheckRxTsIndicateSeq(): Window Shift! IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num); ++ ++ // boundary situation, when seq_num cross 0xFFF ++ if(seq_num >= (wsize - 1)) ++ preorder_ctrl->indicate_seq = seq_num + 1 -wsize; ++ else ++ preorder_ctrl->indicate_seq = 0xFFF - (wsize - (seq_num + 1)) + 1; ++ ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d SN_LESS(wend, seq_num) IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, seq_num); ++ #endif ++ } ++ ++ //DbgPrint("exit->check_indicate_seq(): IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num); ++ ++ return _TRUE; ++} ++ ++int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl, union recv_frame *prframe); ++int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl, union recv_frame *prframe) ++{ ++ struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++ _queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue; ++ _list *phead, *plist; ++ union recv_frame *pnextrframe; ++ struct rx_pkt_attrib *pnextattrib; ++ ++ //DbgPrint("+enqueue_reorder_recvframe()\n"); ++ ++ //_enter_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //_rtw_spinlock_ex(&ppending_recvframe_queue->lock); ++ ++ ++ phead = get_list_head(ppending_recvframe_queue); ++ plist = get_next(phead); ++ ++ while(rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ pnextrframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ pnextattrib = &pnextrframe->u.hdr.attrib; ++ ++ if(SN_LESS(pnextattrib->seq_num, pattrib->seq_num)) ++ { ++ plist = get_next(plist); ++ } ++ else if( SN_EQUAL(pnextattrib->seq_num, pattrib->seq_num)) ++ { ++ //Duplicate entry is found!! Do not insert current entry. ++ //RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("InsertRxReorderList(): Duplicate packet is dropped!! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, SeqNum)); ++ ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ ++ return _FALSE; ++ } ++ else ++ { ++ break; ++ } ++ ++ //DbgPrint("enqueue_reorder_recvframe():while\n"); ++ ++ } ++ ++ ++ //_enter_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //_rtw_spinlock_ex(&ppending_recvframe_queue->lock); ++ ++ rtw_list_delete(&(prframe->u.hdr.list)); ++ ++ rtw_list_insert_tail(&(prframe->u.hdr.list), plist); ++ ++ //_rtw_spinunlock_ex(&ppending_recvframe_queue->lock); ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ ++ ++ //RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("InsertRxReorderList(): Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, SeqNum)); ++ return _TRUE; ++ ++} ++ ++int recv_indicatepkts_in_order(_adapter *padapter, struct recv_reorder_ctrl *preorder_ctrl, int bforced); ++int recv_indicatepkts_in_order(_adapter *padapter, struct recv_reorder_ctrl *preorder_ctrl, int bforced) ++{ ++ //_irqL irql; ++ //u8 bcancelled; ++ _list *phead, *plist; ++ union recv_frame *prframe; ++ struct rx_pkt_attrib *pattrib; ++ //u8 index = 0; ++ int bPktInBuf = _FALSE; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue; ++ ++ //DbgPrint("+recv_indicatepkts_in_order\n"); ++ ++ //_enter_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //_rtw_spinlock_ex(&ppending_recvframe_queue->lock); ++ ++ phead = get_list_head(ppending_recvframe_queue); ++ plist = get_next(phead); ++ ++#if 0 ++ // Check if there is any other indication thread running. ++ if(pTS->RxIndicateState == RXTS_INDICATE_PROCESSING) ++ return; ++#endif ++ ++ // Handling some condition for forced indicate case. ++ if(bforced==_TRUE) ++ { ++ if(rtw_is_list_empty(phead)) ++ { ++ // _exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //_rtw_spinunlock_ex(&ppending_recvframe_queue->lock); ++ return _TRUE; ++ } ++ ++ prframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ pattrib = &prframe->u.hdr.attrib; ++ preorder_ctrl->indicate_seq = pattrib->seq_num; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ } ++ ++ // Prepare indication list and indication. ++ // Check if there is any packet need indicate. ++ while(!rtw_is_list_empty(phead)) ++ { ++ ++ prframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ pattrib = &prframe->u.hdr.attrib; ++ ++ if(!SN_LESS(preorder_ctrl->indicate_seq, pattrib->seq_num)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ++ ("recv_indicatepkts_in_order: indicate=%d seq=%d amsdu=%d\n", ++ preorder_ctrl->indicate_seq, pattrib->seq_num, pattrib->amsdu)); ++ ++#if 0 ++ // This protect buffer from overflow. ++ if(index >= REORDER_WIN_SIZE) ++ { ++ RT_ASSERT(FALSE, ("IndicateRxReorderList(): Buffer overflow!! \n")); ++ bPktInBuf = TRUE; ++ break; ++ } ++#endif ++ ++ plist = get_next(plist); ++ rtw_list_delete(&(prframe->u.hdr.list)); ++ ++ if(SN_EQUAL(preorder_ctrl->indicate_seq, pattrib->seq_num)) ++ { ++ preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1) & 0xFFF; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ } ++ ++#if 0 ++ index++; ++ if(index==1) ++ { ++ //Cancel previous pending timer. ++ //PlatformCancelTimer(Adapter, &pTS->RxPktPendingTimer); ++ if(bforced!=_TRUE) ++ { ++ //DBG_871X("_cancel_timer(&preorder_ctrl->reordering_ctrl_timer, &bcancelled);\n"); ++ _cancel_timer(&preorder_ctrl->reordering_ctrl_timer, &bcancelled); ++ } ++ } ++#endif ++ ++ //Set this as a lock to make sure that only one thread is indicating packet. ++ //pTS->RxIndicateState = RXTS_INDICATE_PROCESSING; ++ ++ // Indicate packets ++ //RT_ASSERT((index<=REORDER_WIN_SIZE), ("RxReorderIndicatePacket(): Rx Reorder buffer full!! \n")); ++ ++ ++ //indicate this recv_frame ++ //DbgPrint("recv_indicatepkts_in_order, indicate_seq=%d, seq_num=%d\n", precvpriv->indicate_seq, pattrib->seq_num); ++ if(!pattrib->amsdu) ++ { ++ //DBG_871X("recv_indicatepkts_in_order, amsdu!=1, indicate_seq=%d, seq_num=%d\n", preorder_ctrl->indicate_seq, pattrib->seq_num); ++ ++ if ((padapter->bDriverStopped == _FALSE) && ++ (padapter->bSurpriseRemoved == _FALSE)) ++ { ++ ++ rtw_recv_indicatepkt(padapter, prframe);//indicate this recv_frame ++ ++ } ++ } ++ else if(pattrib->amsdu==1) ++ { ++ if(amsdu_to_msdu(padapter, prframe)!=_SUCCESS) ++ { ++ rtw_free_recvframe(prframe, &precvpriv->free_recv_queue); ++ } ++ } ++ else ++ { ++ //error condition; ++ } ++ ++ ++ //Update local variables. ++ bPktInBuf = _FALSE; ++ ++ } ++ else ++ { ++ bPktInBuf = _TRUE; ++ break; ++ } ++ ++ //DbgPrint("recv_indicatepkts_in_order():while\n"); ++ ++ } ++ ++ //_rtw_spinunlock_ex(&ppending_recvframe_queue->lock); ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ ++/* ++ //Release the indication lock and set to new indication step. ++ if(bPktInBuf) ++ { ++ // Set new pending timer. ++ //pTS->RxIndicateState = RXTS_INDICATE_REORDER; ++ //PlatformSetTimer(Adapter, &pTS->RxPktPendingTimer, pHTInfo->RxReorderPendingTime); ++ //DBG_871X("_set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME)\n"); ++ _set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME); ++ } ++ else ++ { ++ //pTS->RxIndicateState = RXTS_INDICATE_IDLE; ++ } ++*/ ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ ++ //return _TRUE; ++ return bPktInBuf; ++ ++} ++ ++int recv_indicatepkt_reorder(_adapter *padapter, union recv_frame *prframe); ++int recv_indicatepkt_reorder(_adapter *padapter, union recv_frame *prframe) ++{ ++ _irqL irql; ++ int retval = _SUCCESS; ++ struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++ struct recv_reorder_ctrl *preorder_ctrl = prframe->u.hdr.preorder_ctrl; ++ _queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue; ++ ++ if(!pattrib->amsdu) ++ { ++ //s1. ++ wlanhdr_to_ethhdr(prframe); ++ ++ //if ((pattrib->qos!=1) /*|| pattrib->priority!=0 || IS_MCAST(pattrib->ra)*/ ++ // || (pattrib->eth_type==0x0806) || (pattrib->ack_policy!=0)) ++ if (pattrib->qos!=1) ++ { ++ if ((padapter->bDriverStopped == _FALSE) && ++ (padapter->bSurpriseRemoved == _FALSE)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@ recv_indicatepkt_reorder -recv_func recv_indicatepkt\n" )); ++ ++ rtw_recv_indicatepkt(padapter, prframe); ++ return _SUCCESS; ++ ++ } ++ ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s pattrib->qos !=1\n", __FUNCTION__); ++ #endif ++ ++ return _FAIL; ++ ++ } ++ ++ if (preorder_ctrl->enable == _FALSE) ++ { ++ //indicate this recv_frame ++ preorder_ctrl->indicate_seq = pattrib->seq_num; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ ++ rtw_recv_indicatepkt(padapter, prframe); ++ ++ preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1)%4096; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ ++ return _SUCCESS; ++ } ++ ++#ifndef CONFIG_RECV_REORDERING_CTRL ++ //indicate this recv_frame ++ rtw_recv_indicatepkt(padapter, prframe); ++ return _SUCCESS; ++#endif ++ ++ } ++ else if(pattrib->amsdu==1) //temp filter -> means didn't support A-MSDUs in a A-MPDU ++ { ++ if (preorder_ctrl->enable == _FALSE) ++ { ++ preorder_ctrl->indicate_seq = pattrib->seq_num; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ ++ retval = amsdu_to_msdu(padapter, prframe); ++ ++ preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1)%4096; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, pattrib->seq_num); ++ #endif ++ ++ if(retval != _SUCCESS){ ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s amsdu_to_msdu fail\n", __FUNCTION__); ++ #endif ++ } ++ ++ return retval; ++ } ++ } ++ else ++ { ++ ++ } ++ ++ _enter_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ++ ("recv_indicatepkt_reorder: indicate=%d seq=%d\n", ++ preorder_ctrl->indicate_seq, pattrib->seq_num)); ++ ++ //s2. check if winstart_b(indicate_seq) needs to been updated ++ if(!check_indicate_seq(preorder_ctrl, pattrib->seq_num)) ++ { ++ //pHTInfo->RxReorderDropCounter++; ++ //ReturnRFDList(Adapter, pRfd); ++ //RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("RxReorderIndicatePacket() ==> Packet Drop!!\n")); ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //return _FAIL; ++ ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s check_indicate_seq fail\n", __FUNCTION__); ++ #endif ++#if 0 ++ rtw_recv_indicatepkt(padapter, prframe); ++ ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ ++ goto _success_exit; ++#else ++ goto _err_exit; ++#endif ++ } ++ ++ ++ //s3. Insert all packet into Reorder Queue to maintain its ordering. ++ if(!enqueue_reorder_recvframe(preorder_ctrl, prframe)) ++ { ++ //DbgPrint("recv_indicatepkt_reorder, enqueue_reorder_recvframe fail!\n"); ++ //_exit_critical_ex(&ppending_recvframe_queue->lock, &irql); ++ //return _FAIL; ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s enqueue_reorder_recvframe fail\n", __FUNCTION__); ++ #endif ++ goto _err_exit; ++ } ++ ++ ++ //s4. ++ // Indication process. ++ // After Packet dropping and Sliding Window shifting as above, we can now just indicate the packets ++ // with the SeqNum smaller than latest WinStart and buffer other packets. ++ // ++ // For Rx Reorder condition: ++ // 1. All packets with SeqNum smaller than WinStart => Indicate ++ // 2. All packets with SeqNum larger than or equal to WinStart => Buffer it. ++ // ++ ++ //recv_indicatepkts_in_order(padapter, preorder_ctrl, _TRUE); ++ if(recv_indicatepkts_in_order(padapter, preorder_ctrl, _FALSE)==_TRUE) ++ { ++ _set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME); ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ } ++ else ++ { ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ _cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer); ++ } ++ ++ ++_success_exit: ++ ++ return _SUCCESS; ++ ++_err_exit: ++ ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ ++ return _FAIL; ++} ++ ++ ++void rtw_reordering_ctrl_timeout_handler(void *pcontext) ++{ ++ _irqL irql; ++ struct recv_reorder_ctrl *preorder_ctrl = (struct recv_reorder_ctrl *)pcontext; ++ _adapter *padapter = preorder_ctrl->padapter; ++ _queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue; ++ ++ ++ if(padapter->bDriverStopped ||padapter->bSurpriseRemoved) ++ { ++ return; ++ } ++ ++ //DBG_871X("+rtw_reordering_ctrl_timeout_handler()=>\n"); ++ ++ _enter_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ ++ if(recv_indicatepkts_in_order(padapter, preorder_ctrl, _TRUE)==_TRUE) ++ { ++ _set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME); ++ } ++ ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irql); ++ ++} ++ ++int process_recv_indicatepkts(_adapter *padapter, union recv_frame *prframe); ++int process_recv_indicatepkts(_adapter *padapter, union recv_frame *prframe) ++{ ++ int retval = _SUCCESS; ++ //struct recv_priv *precvpriv = &padapter->recvpriv; ++ //struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++#ifdef CONFIG_TDLS ++ struct sta_info *psta = prframe->u.hdr.psta; ++#endif //CONFIG_TDLS ++ ++#ifdef CONFIG_80211N_HT ++ ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ ++#ifdef CONFIG_TDLS ++ if( (phtpriv->ht_option==_TRUE) || ++ ((psta->tdls_sta_state & TDLS_LINKED_STATE) && ++ (psta->htpriv.ht_option==_TRUE) && ++ (psta->htpriv.ampdu_enable==_TRUE))) //B/G/N Mode ++#else ++ if(phtpriv->ht_option==_TRUE) //B/G/N Mode ++#endif //CONFIG_TDLS ++ { ++ //prframe->u.hdr.preorder_ctrl = &precvpriv->recvreorder_ctrl[pattrib->priority]; ++ ++ if(recv_indicatepkt_reorder(padapter, prframe)!=_SUCCESS)// including perform A-MPDU Rx Ordering Buffer Control ++ { ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s recv_indicatepkt_reorder error!\n", __FUNCTION__); ++ #endif ++ ++ if ((padapter->bDriverStopped == _FALSE) && ++ (padapter->bSurpriseRemoved == _FALSE)) ++ { ++ retval = _FAIL; ++ return retval; ++ } ++ } ++ } ++ else //B/G mode ++#endif ++ { ++ retval=wlanhdr_to_ethhdr (prframe); ++ if(retval != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("wlanhdr_to_ethhdr: drop pkt \n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s wlanhdr_to_ethhdr error!\n", __FUNCTION__); ++ #endif ++ return retval; ++ } ++ ++ if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE)) ++ { ++ //indicate this recv_frame ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("@@@@ process_recv_indicatepkts- recv_func recv_indicatepkt\n" )); ++ rtw_recv_indicatepkt(padapter, prframe); ++ ++ ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("@@@@ process_recv_indicatepkts- recv_func free_indicatepkt\n" )); ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ retval = _FAIL; ++ return retval; ++ } ++ ++ } ++ ++ return retval; ++ ++} ++ ++int recv_func_prehandle(_adapter *padapter, union recv_frame *rframe) ++{ ++ int ret = _SUCCESS; ++ struct rx_pkt_attrib *pattrib = &rframe->u.hdr.attrib; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue; ++ ++#ifdef CONFIG_MP_INCLUDED ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++#endif //CONFIG_MP_INCLUDED ++ ++#ifdef CONFIG_MP_INCLUDED ++ if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE))//&&(padapter->mppriv.check_mp_pkt == 0)) ++ { ++ if (pattrib->crc_err == 1) ++ padapter->mppriv.rx_crcerrpktcount++; ++ else ++ padapter->mppriv.rx_pktcount++; ++ ++ if (check_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE) == _FALSE) { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("MP - Not in loopback mode , drop pkt \n")); ++ ret = _FAIL; ++ rtw_free_recvframe(rframe, pfree_recv_queue);//free this recv_frame ++ goto exit; ++ } ++ } ++#endif ++ ++ //check the frame crtl field and decache ++ ret = validate_recv_frame(padapter, rframe); ++ if (ret != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("recv_func: validate_recv_frame fail! drop pkt\n")); ++ rtw_free_recvframe(rframe, pfree_recv_queue);//free this recv_frame ++ goto exit; ++ } ++ ++exit: ++ return ret; ++} ++ ++int recv_func_posthandle(_adapter *padapter, union recv_frame *prframe) ++{ ++ int ret = _SUCCESS; ++ union recv_frame *orig_prframe = prframe; ++ struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue; ++ ++#ifdef CONFIG_MP_INCLUDED ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++#endif //CONFIG_MP_INCLUDED ++ ++#ifdef CONFIG_TDLS ++ u8 *psnap_type, *pcategory; ++ struct sta_info *ptdls_sta = NULL; ++#endif //CONFIG_TDLS ++ ++ ++ // DATA FRAME ++ rtw_led_control(padapter, LED_CTL_RX); ++ ++ prframe = decryptor(padapter, prframe); ++ if (prframe == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("decryptor: drop pkt\n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s decryptor: drop pkt\n", __FUNCTION__); ++ #endif ++ ret = _FAIL; ++ goto _recv_data_drop; ++ } ++ ++#if 0 ++ if ( padapter->adapter_type == PRIMARY_ADAPTER ) ++ { ++ DBG_871X("+++\n"); ++ { ++ int i; ++ u8 *ptr = get_recvframe_data(prframe); ++ for(i=0; i<140;i=i+8) ++ DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:", *(ptr+i), ++ *(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7)); ++ ++ } ++ DBG_871X("---\n"); ++ } ++#endif //RTK_DMP_PLATFORM ++ ++#ifdef CONFIG_TDLS ++ //check TDLS frame ++ psnap_type = get_recvframe_data(orig_prframe); ++ psnap_type+=pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE; ++ pcategory = psnap_type + ETH_TYPE_LEN + PAYLOAD_TYPE_LEN; ++ ++ if((_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_TDLS, ETH_TYPE_LEN)) && ++ ((*pcategory==RTW_WLAN_CATEGORY_TDLS) || (*pcategory==RTW_WLAN_CATEGORY_P2P))){ ++ ret = OnTDLS(padapter, prframe); //all of functions will return _FAIL ++ goto _exit_recv_func; ++ } ++#endif //CONFIG_TDLS ++ ++ prframe = recvframe_chk_defrag(padapter, prframe); ++ if(prframe==NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chk_defrag: drop pkt\n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s recvframe_chk_defrag: drop pkt\n", __FUNCTION__); ++ #endif ++ goto _recv_data_drop; ++ } ++ ++ prframe=portctrl(padapter, prframe); ++ if (prframe == NULL) { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("portctrl: drop pkt \n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s portctrl: drop pkt\n", __FUNCTION__); ++ #endif ++ ret = _FAIL; ++ goto _recv_data_drop; ++ } ++ ++#ifdef CONFIG_TDLS ++ if(padapter->tdlsinfo.setup_state == TDLS_LINKED_STATE) ++ ptdls_sta = rtw_get_stainfo(&padapter->stapriv, pattrib->src); ++ count_rx_stats(padapter, prframe, ptdls_sta); ++#else ++ count_rx_stats(padapter, prframe, NULL); ++#endif //CONFIG_TDLS ++ ++#ifdef CONFIG_80211N_HT ++ ++ ret = process_recv_indicatepkts(padapter, prframe); ++ if (ret != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recv_func: process_recv_indicatepkts fail! \n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s recv_func: process_recv_indicatepkts fail!\n", __FUNCTION__); ++ #endif ++ rtw_free_recvframe(orig_prframe, pfree_recv_queue);//free this recv_frame ++ goto _recv_data_drop; ++ } ++ ++#else // CONFIG_80211N_HT ++ ++ if (!pattrib->amsdu) ++ { ++ ret = wlanhdr_to_ethhdr (prframe); ++ if (ret != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("wlanhdr_to_ethhdr: drop pkt \n")); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s wlanhdr_to_ethhdr: drop pkt\n", __FUNCTION__); ++ #endif ++ rtw_free_recvframe(orig_prframe, pfree_recv_queue);//free this recv_frame ++ goto _recv_data_drop; ++ } ++ ++ if ((padapter->bDriverStopped == _FALSE) && (padapter->bSurpriseRemoved == _FALSE)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@ recv_func: recv_func rtw_recv_indicatepkt\n" )); ++ //indicate this recv_frame ++ ret = rtw_recv_indicatepkt(padapter, prframe); ++ if (ret != _SUCCESS) ++ { ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s rtw_recv_indicatepkt fail!\n", __FUNCTION__); ++ #endif ++ goto _recv_data_drop; ++ } ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@ recv_func: rtw_free_recvframe\n" )); ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_debug_, ("recv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s ecv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", __FUNCTION__, ++ padapter->bDriverStopped, padapter->bSurpriseRemoved); ++ #endif ++ ret = _FAIL; ++ rtw_free_recvframe(orig_prframe, pfree_recv_queue); //free this recv_frame ++ } ++ ++ } ++ else if(pattrib->amsdu==1) ++ { ++ ++ ret = amsdu_to_msdu(padapter, prframe); ++ if(ret != _SUCCESS) ++ { ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s amsdu_to_msdu fail\n", __FUNCTION__); ++ #endif ++ rtw_free_recvframe(orig_prframe, pfree_recv_queue); ++ goto _recv_data_drop; ++ } ++ } ++ else ++ { ++ #ifdef DBG_RX_DROP_FRAME ++ DBG_871X("DBG_RX_DROP_FRAME %s what is this condition??\n", __FUNCTION__); ++ #endif ++ goto _recv_data_drop; ++ } ++#endif // CONFIG_80211N_HT ++ ++_exit_recv_func: ++ return ret; ++ ++_recv_data_drop: ++ precvpriv->rx_drop++; ++ return ret; ++} ++ ++ ++int recv_func(_adapter *padapter, union recv_frame *rframe); ++int recv_func(_adapter *padapter, union recv_frame *rframe) ++{ ++ int ret; ++ struct rx_pkt_attrib *prxattrib = &rframe->u.hdr.attrib; ++ struct recv_priv *recvpriv = &padapter->recvpriv; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct mlme_priv *mlmepriv = &padapter->mlmepriv; ++ ++ /* check if need to handle uc_swdec_pending_queue*/ ++ if (check_fwstate(mlmepriv, WIFI_STATION_STATE) && psecuritypriv->busetkipkey) ++ { ++ union recv_frame *pending_frame; ++ _irqL irqL; ++ ++ while((pending_frame=rtw_alloc_recvframe(&padapter->recvpriv.uc_swdec_pending_queue))) { ++ if (recv_func_posthandle(padapter, pending_frame) == _SUCCESS) ++ DBG_871X("%s: dequeue uc_swdec_pending_queue\n", __func__); ++ } ++ } ++ ++ ret = recv_func_prehandle(padapter, rframe); ++ ++ if(ret == _SUCCESS) { ++ ++ /* check if need to enqueue into uc_swdec_pending_queue*/ ++ if (check_fwstate(mlmepriv, WIFI_STATION_STATE) && ++ !IS_MCAST(prxattrib->ra) && prxattrib->encrypt>0 && ++ (prxattrib->bdecrypted == 0 ||psecuritypriv->sw_decrypt == _TRUE) && ++ !is_wep_enc(psecuritypriv->dot11PrivacyAlgrthm) && ++ !psecuritypriv->busetkipkey) { ++ rtw_enqueue_recvframe(rframe, &padapter->recvpriv.uc_swdec_pending_queue); ++ DBG_871X("%s: no key, enqueue uc_swdec_pending_queue\n", __func__); ++ goto exit; ++ } ++ ++ ret = recv_func_posthandle(padapter, rframe); ++ } ++ ++exit: ++ return ret; ++} ++ ++ ++s32 rtw_recv_entry(union recv_frame *precvframe) ++{ ++ _adapter *padapter; ++ struct recv_priv *precvpriv; ++ s32 ret=_SUCCESS; ++ ++_func_enter_; ++ ++// RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("+rtw_recv_entry\n")); ++ ++ padapter = precvframe->u.hdr.adapter; ++ ++ precvpriv = &padapter->recvpriv; ++ ++ ++ if ((ret = recv_func(padapter, precvframe)) == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("rtw_recv_entry: recv_func return fail!!!\n")); ++ goto _recv_entry_drop; ++ } ++ ++ ++ precvpriv->rx_pkts++; ++ ++_func_exit_; ++ ++ return ret; ++ ++_recv_entry_drop: ++ ++#ifdef CONFIG_MP_INCLUDED ++ padapter->mppriv.rx_pktloss = precvpriv->rx_drop; ++#endif ++ ++ //RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("_recv_entry_drop\n")); ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++void rtw_signal_stat_timer_hdl(RTW_TIMER_HDL_ARGS){ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ struct recv_priv *recvpriv = &adapter->recvpriv; ++ ++ u32 tmp_s, tmp_q; ++ u8 avg_signal_strength = 0; ++ u8 avg_signal_qual = 0; ++ u32 num_signal_strength = 0; ++ u32 num_signal_qual = 0; ++ u8 _alpha = 3; // this value is based on converging_constant = 5000 and sampling_interval = 1000 ++ ++ if(adapter->recvpriv.is_signal_dbg) { ++ //update the user specific value, signal_strength_dbg, to signal_strength, rssi ++ adapter->recvpriv.signal_strength= adapter->recvpriv.signal_strength_dbg; ++ adapter->recvpriv.rssi=(s8)translate_percentage_to_dbm((u8)adapter->recvpriv.signal_strength_dbg); ++ } else { ++ ++ if(recvpriv->signal_strength_data.update_req == 0) {// update_req is clear, means we got rx ++ avg_signal_strength = recvpriv->signal_strength_data.avg_val; ++ num_signal_strength = recvpriv->signal_strength_data.total_num; ++ // after avg_vals are accquired, we can re-stat the signal values ++ recvpriv->signal_strength_data.update_req = 1; ++ } ++ ++ if(recvpriv->signal_qual_data.update_req == 0) {// update_req is clear, means we got rx ++ avg_signal_qual = recvpriv->signal_qual_data.avg_val; ++ num_signal_qual = recvpriv->signal_qual_data.total_num; ++ // after avg_vals are accquired, we can re-stat the signal values ++ recvpriv->signal_qual_data.update_req = 1; ++ } ++ ++ if (num_signal_strength == 0) { ++ if (rtw_get_on_cur_ch_time(adapter) == 0 ++ || rtw_get_passing_time_ms(rtw_get_on_cur_ch_time(adapter)) < 2 * adapter->mlmeextpriv.mlmext_info.bcn_interval ++ ) { ++ goto set_timer; ++ } ++ } ++ ++ if(check_fwstate(&adapter->mlmepriv, _FW_UNDER_SURVEY) == _TRUE ++ || check_fwstate(&adapter->mlmepriv, _FW_LINKED) == _FALSE ++ ) { ++ goto set_timer; ++ } ++ ++ #ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(adapter, _FW_UNDER_SURVEY) == _TRUE) ++ goto set_timer; ++ #endif ++ ++ //update value of signal_strength, rssi, signal_qual ++ tmp_s = (avg_signal_strength+(_alpha-1)*recvpriv->signal_strength); ++ if(tmp_s %_alpha) ++ tmp_s = tmp_s/_alpha + 1; ++ else ++ tmp_s = tmp_s/_alpha; ++ if(tmp_s>100) ++ tmp_s = 100; ++ ++ tmp_q = (avg_signal_qual+(_alpha-1)*recvpriv->signal_qual); ++ if(tmp_q %_alpha) ++ tmp_q = tmp_q/_alpha + 1; ++ else ++ tmp_q = tmp_q/_alpha; ++ if(tmp_q>100) ++ tmp_q = 100; ++ ++ recvpriv->signal_strength = tmp_s; ++ recvpriv->rssi = (s8)translate_percentage_to_dbm(tmp_s); ++ recvpriv->signal_qual = tmp_q; ++ ++ #if defined(DBG_RX_SIGNAL_DISPLAY_PROCESSING) && 1 ++ DBG_871X(FUNC_ADPT_FMT" signal_strength:%3u, rssi:%3d, signal_qual:%3u" ++ ", num_signal_strength:%u, num_signal_qual:%u" ++ ", on_cur_ch_ms:%d" ++ "\n" ++ , FUNC_ADPT_ARG(adapter) ++ , recvpriv->signal_strength ++ , recvpriv->rssi ++ , recvpriv->signal_qual ++ , num_signal_strength, num_signal_qual ++ , rtw_get_on_cur_ch_time(adapter) ? rtw_get_passing_time_ms(rtw_get_on_cur_ch_time(adapter)) : 0 ++ ); ++ #endif ++ } ++ ++set_timer: ++ rtw_set_signal_stat_timer(recvpriv); ++ ++} ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_rf.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_rf.c +new file mode 100644 +index 000000000000..52234bd2d0ec +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_rf.c +@@ -0,0 +1,94 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_RF_C_ ++ ++#include ++#include ++#include ++#include ++#include ++ ++ ++struct ch_freq { ++ u32 channel; ++ u32 frequency; ++}; ++ ++struct ch_freq ch_freq_map[] = { ++ {1, 2412},{2, 2417},{3, 2422},{4, 2427},{5, 2432}, ++ {6, 2437},{7, 2442},{8, 2447},{9, 2452},{10, 2457}, ++ {11, 2462},{12, 2467},{13, 2472},{14, 2484}, ++ /* UNII */ ++ {36, 5180},{40, 5200},{44, 5220},{48, 5240},{52, 5260}, ++ {56, 5280},{60, 5300},{64, 5320},{149, 5745},{153, 5765}, ++ {157, 5785},{161, 5805},{165, 5825},{167, 5835},{169, 5845}, ++ {171, 5855},{173, 5865}, ++ /* HiperLAN2 */ ++ {100, 5500},{104, 5520},{108, 5540},{112, 5560},{116, 5580}, ++ {120, 5600},{124, 5620},{128, 5640},{132, 5660},{136, 5680}, ++ {140, 5700}, ++ /* Japan MMAC */ ++ {34, 5170},{38, 5190},{42, 5210},{46, 5230}, ++ /* Japan */ ++ {184, 4920},{188, 4940},{192, 4960},{196, 4980}, ++ {208, 5040},/* Japan, means J08 */ ++ {212, 5060},/* Japan, means J12 */ ++ {216, 5080},/* Japan, means J16 */ ++}; ++ ++int ch_freq_map_num = (sizeof(ch_freq_map) / sizeof(struct ch_freq)); ++ ++u32 rtw_ch2freq(u32 channel) ++{ ++ u8 i; ++ u32 freq = 0; ++ ++ for (i = 0; i < ch_freq_map_num; i++) ++ { ++ if (channel == ch_freq_map[i].channel) ++ { ++ freq = ch_freq_map[i].frequency; ++ break; ++ } ++ } ++ if (i == ch_freq_map_num) ++ freq = 2412; ++ ++ return freq; ++} ++ ++u32 rtw_freq2ch(u32 freq) ++{ ++ u8 i; ++ u32 ch = 0; ++ ++ for (i = 0; i < ch_freq_map_num; i++) ++ { ++ if (freq == ch_freq_map[i].frequency) ++ { ++ ch = ch_freq_map[i].channel; ++ break; ++ } ++ } ++ if (i == ch_freq_map_num) ++ ch = 1; ++ ++ return ch; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_security.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_security.c +new file mode 100644 +index 000000000000..2df28ba35427 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_security.c +@@ -0,0 +1,3114 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_SECURITY_C_ ++ ++#include ++#include ++#include ++#include ++#include ++ ++ ++//=====WEP related===== ++ ++#define CRC32_POLY 0x04c11db7 ++ ++struct arc4context ++{ ++ u32 x; ++ u32 y; ++ u8 state[256]; ++}; ++ ++ ++static void arcfour_init(struct arc4context *parc4ctx, u8 * key,u32 key_len) ++{ ++ u32 t, u; ++ u32 keyindex; ++ u32 stateindex; ++ u8 * state; ++ u32 counter; ++_func_enter_; ++ state = parc4ctx->state; ++ parc4ctx->x = 0; ++ parc4ctx->y = 0; ++ for (counter = 0; counter < 256; counter++) ++ state[counter] = (u8)counter; ++ keyindex = 0; ++ stateindex = 0; ++ for (counter = 0; counter < 256; counter++) ++ { ++ t = state[counter]; ++ stateindex = (stateindex + key[keyindex] + t) & 0xff; ++ u = state[stateindex]; ++ state[stateindex] = (u8)t; ++ state[counter] = (u8)u; ++ if (++keyindex >= key_len) ++ keyindex = 0; ++ } ++_func_exit_; ++} ++static u32 arcfour_byte( struct arc4context *parc4ctx) ++{ ++ u32 x; ++ u32 y; ++ u32 sx, sy; ++ u8 * state; ++_func_enter_; ++ state = parc4ctx->state; ++ x = (parc4ctx->x + 1) & 0xff; ++ sx = state[x]; ++ y = (sx + parc4ctx->y) & 0xff; ++ sy = state[y]; ++ parc4ctx->x = x; ++ parc4ctx->y = y; ++ state[y] = (u8)sx; ++ state[x] = (u8)sy; ++_func_exit_; ++ return state[(sx + sy) & 0xff]; ++} ++ ++ ++static void arcfour_encrypt( struct arc4context *parc4ctx, ++ u8 * dest, ++ u8 * src, ++ u32 len) ++{ ++ u32 i; ++_func_enter_; ++ for (i = 0; i < len; i++) ++ dest[i] = src[i] ^ (unsigned char)arcfour_byte(parc4ctx); ++_func_exit_; ++} ++ ++static sint bcrc32initialized = 0; ++static u32 crc32_table[256]; ++ ++ ++static u8 crc32_reverseBit( u8 data) ++{ ++ return( (u8)((data<<7)&0x80) | ((data<<5)&0x40) | ((data<<3)&0x20) | ((data<<1)&0x10) | ((data>>1)&0x08) | ((data>>3)&0x04) | ((data>>5)&0x02) | ((data>>7)&0x01) ); ++} ++ ++static void crc32_init(void) ++{ ++_func_enter_; ++ if (bcrc32initialized == 1) ++ goto exit; ++ else{ ++ sint i, j; ++ u32 c; ++ u8 *p=(u8 *)&c, *p1; ++ u8 k; ++ ++ c = 0x12340000; ++ ++ for (i = 0; i < 256; ++i) ++ { ++ k = crc32_reverseBit((u8)i); ++ for (c = ((u32)k) << 24, j = 8; j > 0; --j){ ++ c = c & 0x80000000 ? (c << 1) ^ CRC32_POLY : (c << 1); ++ } ++ p1 = (u8 *)&crc32_table[i]; ++ ++ p1[0] = crc32_reverseBit(p[3]); ++ p1[1] = crc32_reverseBit(p[2]); ++ p1[2] = crc32_reverseBit(p[1]); ++ p1[3] = crc32_reverseBit(p[0]); ++ } ++ bcrc32initialized= 1; ++ } ++exit: ++_func_exit_; ++} ++ ++static u32 getcrc32(u8 *buf, sint len) ++{ ++ u8 *p; ++ u32 crc; ++_func_enter_; ++ if (bcrc32initialized == 0) crc32_init(); ++ ++ crc = 0xffffffff; /* preload shift register, per CRC-32 spec */ ++ ++ for (p = buf; len > 0; ++p, --len) ++ { ++ crc = crc32_table[ (crc ^ *p) & 0xff] ^ (crc >> 8); ++ } ++_func_exit_; ++ return ~crc; /* transmit complement, per CRC-32 spec */ ++} ++ ++ ++/* ++ Need to consider the fragment situation ++*/ ++void rtw_wep_encrypt(_adapter *padapter, u8 *pxmitframe) ++{ // exclude ICV ++ ++ unsigned char crc[4]; ++ struct arc4context mycontext; ++ ++ sint curfragnum,length; ++ u32 keylength; ++ ++ u8 *pframe, *payload,*iv; //,*wepkey ++ u8 wepkey[16]; ++ struct pkt_attrib *pattrib = &((struct xmit_frame*)pxmitframe)->attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ ++_func_enter_; ++ ++ ++ if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL) ++ return; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE + ++ (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ); ++#else ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET; ++#endif ++ ++ //start to encrypt each fragment ++ if((pattrib->encrypt==_WEP40_)||(pattrib->encrypt==_WEP104_)) ++ { ++ keylength=psecuritypriv->dot11DefKeylen[psecuritypriv->dot11PrivacyKeyIndex]; ++ ++ for(curfragnum=0;curfragnumnr_frags;curfragnum++) ++ { ++ iv=pframe+pattrib->hdrlen; ++ _rtw_memcpy(&wepkey[0], iv, 3); ++ _rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[psecuritypriv->dot11PrivacyKeyIndex].skey[0],keylength); ++ payload=pframe+pattrib->iv_len+pattrib->hdrlen; ++ ++ if((curfragnum+1)==pattrib->nr_frags) ++ { //the last fragment ++ ++ length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len; ++ ++ *((u32 *)crc)=cpu_to_le32(getcrc32(payload,length)); ++ ++ arcfour_init(&mycontext, wepkey,3+keylength); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ arcfour_encrypt(&mycontext, payload+length, crc, 4); ++ ++ } ++ else ++ { ++ length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ; ++ *((u32 *)crc)=cpu_to_le32(getcrc32(payload,length)); ++ arcfour_init(&mycontext, wepkey,3+keylength); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ arcfour_encrypt(&mycontext, payload+length, crc, 4); ++ ++ pframe+=pxmitpriv->frag_len; ++ pframe=(u8 *)RND4((SIZE_PTR)(pframe)); ++ ++ } ++ ++ } ++ ++ } ++ ++_func_exit_; ++ ++} ++ ++void rtw_wep_decrypt(_adapter *padapter, u8 *precvframe) ++{ ++ // exclude ICV ++ u8 crc[4]; ++ struct arc4context mycontext; ++ sint length; ++ u32 keylength; ++ u8 *pframe, *payload,*iv,wepkey[16]; ++ u8 keyindex; ++ struct rx_pkt_attrib *prxattrib = &(((union recv_frame*)precvframe)->u.hdr.attrib); ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ ++_func_enter_; ++ ++ pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data; ++ ++ //start to decrypt recvframe ++ if((prxattrib->encrypt==_WEP40_)||(prxattrib->encrypt==_WEP104_)) ++ { ++ iv=pframe+prxattrib->hdrlen; ++ //keyindex=(iv[3]&0x3); ++ keyindex = prxattrib->key_index; ++ keylength=psecuritypriv->dot11DefKeylen[keyindex]; ++ _rtw_memcpy(&wepkey[0], iv, 3); ++ //_rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[psecuritypriv->dot11PrivacyKeyIndex].skey[0],keylength); ++ _rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[keyindex].skey[0],keylength); ++ length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len; ++ ++ payload=pframe+prxattrib->iv_len+prxattrib->hdrlen; ++ ++ //decrypt payload include icv ++ arcfour_init(&mycontext, wepkey,3+keylength); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ ++ //calculate icv and compare the icv ++ *((u32 *)crc)=le32_to_cpu(getcrc32(payload,length-4)); ++ ++ if(crc[3]!=payload[length-1] || crc[2]!=payload[length-2] || crc[1]!=payload[length-3] || crc[0]!=payload[length-4]) ++ { ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_wep_decrypt:icv error crc[3](%x)!=payload[length-1](%x) || crc[2](%x)!=payload[length-2](%x) || crc[1](%x)!=payload[length-3](%x) || crc[0](%x)!=payload[length-4](%x)\n", ++ crc[3],payload[length-1],crc[2],payload[length-2],crc[1],payload[length-3],crc[0],payload[length-4])); ++ } ++ ++ } ++ ++_func_exit_; ++ ++ return; ++ ++} ++ ++//3 =====TKIP related===== ++ ++static u32 secmicgetuint32( u8 * p ) ++// Convert from Byte[] to Us4Byte32 in a portable way ++{ ++ s32 i; ++ u32 res = 0; ++_func_enter_; ++ for( i=0; i<4; i++ ) ++ { ++ res |= ((u32)(*p++)) << (8*i); ++ } ++_func_exit_; ++ return res; ++} ++ ++static void secmicputuint32( u8 * p, u32 val ) ++// Convert from Us4Byte32 to Byte[] in a portable way ++{ ++ long i; ++_func_enter_; ++ for( i=0; i<4; i++ ) ++ { ++ *p++ = (u8) (val & 0xff); ++ val >>= 8; ++ } ++_func_exit_; ++} ++ ++static void secmicclear(struct mic_data *pmicdata) ++{ ++// Reset the state to the empty message. ++_func_enter_; ++ pmicdata->L = pmicdata->K0; ++ pmicdata->R = pmicdata->K1; ++ pmicdata->nBytesInM = 0; ++ pmicdata->M = 0; ++_func_exit_; ++} ++ ++void rtw_secmicsetkey(struct mic_data *pmicdata, u8 * key ) ++{ ++ // Set the key ++_func_enter_; ++ pmicdata->K0 = secmicgetuint32( key ); ++ pmicdata->K1 = secmicgetuint32( key + 4 ); ++ // and reset the message ++ secmicclear(pmicdata); ++_func_exit_; ++} ++ ++void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b ) ++{ ++_func_enter_; ++ // Append the byte to our word-sized buffer ++ pmicdata->M |= ((unsigned long)b) << (8*pmicdata->nBytesInM); ++ pmicdata->nBytesInM++; ++ // Process the word if it is full. ++ if( pmicdata->nBytesInM >= 4 ) ++ { ++ pmicdata->L ^= pmicdata->M; ++ pmicdata->R ^= ROL32( pmicdata->L, 17 ); ++ pmicdata->L += pmicdata->R; ++ pmicdata->R ^= ((pmicdata->L & 0xff00ff00) >> 8) | ((pmicdata->L & 0x00ff00ff) << 8); ++ pmicdata->L += pmicdata->R; ++ pmicdata->R ^= ROL32( pmicdata->L, 3 ); ++ pmicdata->L += pmicdata->R; ++ pmicdata->R ^= ROR32( pmicdata->L, 2 ); ++ pmicdata->L += pmicdata->R; ++ // Clear the buffer ++ pmicdata->M = 0; ++ pmicdata->nBytesInM = 0; ++ } ++_func_exit_; ++} ++ ++void rtw_secmicappend(struct mic_data *pmicdata, u8 * src, u32 nbytes ) ++{ ++_func_enter_; ++ // This is simple ++ while( nbytes > 0 ) ++ { ++ rtw_secmicappendbyte(pmicdata, *src++ ); ++ nbytes--; ++ } ++_func_exit_; ++} ++ ++void rtw_secgetmic(struct mic_data *pmicdata, u8 * dst ) ++{ ++_func_enter_; ++ // Append the minimum padding ++ rtw_secmicappendbyte(pmicdata, 0x5a ); ++ rtw_secmicappendbyte(pmicdata, 0 ); ++ rtw_secmicappendbyte(pmicdata, 0 ); ++ rtw_secmicappendbyte(pmicdata, 0 ); ++ rtw_secmicappendbyte(pmicdata, 0 ); ++ // and then zeroes until the length is a multiple of 4 ++ while( pmicdata->nBytesInM != 0 ) ++ { ++ rtw_secmicappendbyte(pmicdata, 0 ); ++ } ++ // The appendByte function has already computed the result. ++ secmicputuint32( dst, pmicdata->L ); ++ secmicputuint32( dst+4, pmicdata->R ); ++ // Reset to the empty message. ++ secmicclear(pmicdata); ++_func_exit_; ++} ++ ++ ++void rtw_seccalctkipmic(u8 * key,u8 *header,u8 *data,u32 data_len,u8 *mic_code, u8 pri) ++{ ++ ++ struct mic_data micdata; ++ u8 priority[4]={0x0,0x0,0x0,0x0}; ++_func_enter_; ++ rtw_secmicsetkey(&micdata, key); ++ priority[0]=pri; ++ ++ /* Michael MIC pseudo header: DA, SA, 3 x 0, Priority */ ++ if(header[1]&1){ //ToDS==1 ++ rtw_secmicappend(&micdata, &header[16], 6); //DA ++ if(header[1]&2) //From Ds==1 ++ rtw_secmicappend(&micdata, &header[24], 6); ++ else ++ rtw_secmicappend(&micdata, &header[10], 6); ++ } ++ else{ //ToDS==0 ++ rtw_secmicappend(&micdata, &header[4], 6); //DA ++ if(header[1]&2) //From Ds==1 ++ rtw_secmicappend(&micdata, &header[16], 6); ++ else ++ rtw_secmicappend(&micdata, &header[10], 6); ++ ++ } ++ rtw_secmicappend(&micdata, &priority[0], 4); ++ ++ ++ rtw_secmicappend(&micdata, data, data_len); ++ ++ rtw_secgetmic(&micdata,mic_code); ++_func_exit_; ++} ++ ++ ++ ++ ++/* macros for extraction/creation of unsigned char/unsigned short values */ ++#define RotR1(v16) ((((v16) >> 1) & 0x7FFF) ^ (((v16) & 1) << 15)) ++#define Lo8(v16) ((u8)( (v16) & 0x00FF)) ++#define Hi8(v16) ((u8)(((v16) >> 8) & 0x00FF)) ++#define Lo16(v32) ((u16)( (v32) & 0xFFFF)) ++#define Hi16(v32) ((u16)(((v32) >>16) & 0xFFFF)) ++#define Mk16(hi,lo) ((lo) ^ (((u16)(hi)) << 8)) ++ ++/* select the Nth 16-bit word of the temporal key unsigned char array TK[] */ ++#define TK16(N) Mk16(tk[2*(N)+1],tk[2*(N)]) ++ ++/* S-box lookup: 16 bits --> 16 bits */ ++#define _S_(v16) (Sbox1[0][Lo8(v16)] ^ Sbox1[1][Hi8(v16)]) ++ ++/* fixed algorithm "parameters" */ ++#define PHASE1_LOOP_CNT 8 /* this needs to be "big enough" */ ++#define TA_SIZE 6 /* 48-bit transmitter address */ ++#define TK_SIZE 16 /* 128-bit temporal key */ ++#define P1K_SIZE 10 /* 80-bit Phase1 key */ ++#define RC4_KEY_SIZE 16 /* 128-bit RC4KEY (104 bits unknown) */ ++ ++ ++/* 2-unsigned char by 2-unsigned char subset of the full AES S-box table */ ++static const unsigned short Sbox1[2][256]= /* Sbox for hash (can be in ROM) */ ++{ { ++ 0xC6A5,0xF884,0xEE99,0xF68D,0xFF0D,0xD6BD,0xDEB1,0x9154, ++ 0x6050,0x0203,0xCEA9,0x567D,0xE719,0xB562,0x4DE6,0xEC9A, ++ 0x8F45,0x1F9D,0x8940,0xFA87,0xEF15,0xB2EB,0x8EC9,0xFB0B, ++ 0x41EC,0xB367,0x5FFD,0x45EA,0x23BF,0x53F7,0xE496,0x9B5B, ++ 0x75C2,0xE11C,0x3DAE,0x4C6A,0x6C5A,0x7E41,0xF502,0x834F, ++ 0x685C,0x51F4,0xD134,0xF908,0xE293,0xAB73,0x6253,0x2A3F, ++ 0x080C,0x9552,0x4665,0x9D5E,0x3028,0x37A1,0x0A0F,0x2FB5, ++ 0x0E09,0x2436,0x1B9B,0xDF3D,0xCD26,0x4E69,0x7FCD,0xEA9F, ++ 0x121B,0x1D9E,0x5874,0x342E,0x362D,0xDCB2,0xB4EE,0x5BFB, ++ 0xA4F6,0x764D,0xB761,0x7DCE,0x527B,0xDD3E,0x5E71,0x1397, ++ 0xA6F5,0xB968,0x0000,0xC12C,0x4060,0xE31F,0x79C8,0xB6ED, ++ 0xD4BE,0x8D46,0x67D9,0x724B,0x94DE,0x98D4,0xB0E8,0x854A, ++ 0xBB6B,0xC52A,0x4FE5,0xED16,0x86C5,0x9AD7,0x6655,0x1194, ++ 0x8ACF,0xE910,0x0406,0xFE81,0xA0F0,0x7844,0x25BA,0x4BE3, ++ 0xA2F3,0x5DFE,0x80C0,0x058A,0x3FAD,0x21BC,0x7048,0xF104, ++ 0x63DF,0x77C1,0xAF75,0x4263,0x2030,0xE51A,0xFD0E,0xBF6D, ++ 0x814C,0x1814,0x2635,0xC32F,0xBEE1,0x35A2,0x88CC,0x2E39, ++ 0x9357,0x55F2,0xFC82,0x7A47,0xC8AC,0xBAE7,0x322B,0xE695, ++ 0xC0A0,0x1998,0x9ED1,0xA37F,0x4466,0x547E,0x3BAB,0x0B83, ++ 0x8CCA,0xC729,0x6BD3,0x283C,0xA779,0xBCE2,0x161D,0xAD76, ++ 0xDB3B,0x6456,0x744E,0x141E,0x92DB,0x0C0A,0x486C,0xB8E4, ++ 0x9F5D,0xBD6E,0x43EF,0xC4A6,0x39A8,0x31A4,0xD337,0xF28B, ++ 0xD532,0x8B43,0x6E59,0xDAB7,0x018C,0xB164,0x9CD2,0x49E0, ++ 0xD8B4,0xACFA,0xF307,0xCF25,0xCAAF,0xF48E,0x47E9,0x1018, ++ 0x6FD5,0xF088,0x4A6F,0x5C72,0x3824,0x57F1,0x73C7,0x9751, ++ 0xCB23,0xA17C,0xE89C,0x3E21,0x96DD,0x61DC,0x0D86,0x0F85, ++ 0xE090,0x7C42,0x71C4,0xCCAA,0x90D8,0x0605,0xF701,0x1C12, ++ 0xC2A3,0x6A5F,0xAEF9,0x69D0,0x1791,0x9958,0x3A27,0x27B9, ++ 0xD938,0xEB13,0x2BB3,0x2233,0xD2BB,0xA970,0x0789,0x33A7, ++ 0x2DB6,0x3C22,0x1592,0xC920,0x8749,0xAAFF,0x5078,0xA57A, ++ 0x038F,0x59F8,0x0980,0x1A17,0x65DA,0xD731,0x84C6,0xD0B8, ++ 0x82C3,0x29B0,0x5A77,0x1E11,0x7BCB,0xA8FC,0x6DD6,0x2C3A, ++ }, ++ ++ ++ { /* second half of table is unsigned char-reversed version of first! */ ++ 0xA5C6,0x84F8,0x99EE,0x8DF6,0x0DFF,0xBDD6,0xB1DE,0x5491, ++ 0x5060,0x0302,0xA9CE,0x7D56,0x19E7,0x62B5,0xE64D,0x9AEC, ++ 0x458F,0x9D1F,0x4089,0x87FA,0x15EF,0xEBB2,0xC98E,0x0BFB, ++ 0xEC41,0x67B3,0xFD5F,0xEA45,0xBF23,0xF753,0x96E4,0x5B9B, ++ 0xC275,0x1CE1,0xAE3D,0x6A4C,0x5A6C,0x417E,0x02F5,0x4F83, ++ 0x5C68,0xF451,0x34D1,0x08F9,0x93E2,0x73AB,0x5362,0x3F2A, ++ 0x0C08,0x5295,0x6546,0x5E9D,0x2830,0xA137,0x0F0A,0xB52F, ++ 0x090E,0x3624,0x9B1B,0x3DDF,0x26CD,0x694E,0xCD7F,0x9FEA, ++ 0x1B12,0x9E1D,0x7458,0x2E34,0x2D36,0xB2DC,0xEEB4,0xFB5B, ++ 0xF6A4,0x4D76,0x61B7,0xCE7D,0x7B52,0x3EDD,0x715E,0x9713, ++ 0xF5A6,0x68B9,0x0000,0x2CC1,0x6040,0x1FE3,0xC879,0xEDB6, ++ 0xBED4,0x468D,0xD967,0x4B72,0xDE94,0xD498,0xE8B0,0x4A85, ++ 0x6BBB,0x2AC5,0xE54F,0x16ED,0xC586,0xD79A,0x5566,0x9411, ++ 0xCF8A,0x10E9,0x0604,0x81FE,0xF0A0,0x4478,0xBA25,0xE34B, ++ 0xF3A2,0xFE5D,0xC080,0x8A05,0xAD3F,0xBC21,0x4870,0x04F1, ++ 0xDF63,0xC177,0x75AF,0x6342,0x3020,0x1AE5,0x0EFD,0x6DBF, ++ 0x4C81,0x1418,0x3526,0x2FC3,0xE1BE,0xA235,0xCC88,0x392E, ++ 0x5793,0xF255,0x82FC,0x477A,0xACC8,0xE7BA,0x2B32,0x95E6, ++ 0xA0C0,0x9819,0xD19E,0x7FA3,0x6644,0x7E54,0xAB3B,0x830B, ++ 0xCA8C,0x29C7,0xD36B,0x3C28,0x79A7,0xE2BC,0x1D16,0x76AD, ++ 0x3BDB,0x5664,0x4E74,0x1E14,0xDB92,0x0A0C,0x6C48,0xE4B8, ++ 0x5D9F,0x6EBD,0xEF43,0xA6C4,0xA839,0xA431,0x37D3,0x8BF2, ++ 0x32D5,0x438B,0x596E,0xB7DA,0x8C01,0x64B1,0xD29C,0xE049, ++ 0xB4D8,0xFAAC,0x07F3,0x25CF,0xAFCA,0x8EF4,0xE947,0x1810, ++ 0xD56F,0x88F0,0x6F4A,0x725C,0x2438,0xF157,0xC773,0x5197, ++ 0x23CB,0x7CA1,0x9CE8,0x213E,0xDD96,0xDC61,0x860D,0x850F, ++ 0x90E0,0x427C,0xC471,0xAACC,0xD890,0x0506,0x01F7,0x121C, ++ 0xA3C2,0x5F6A,0xF9AE,0xD069,0x9117,0x5899,0x273A,0xB927, ++ 0x38D9,0x13EB,0xB32B,0x3322,0xBBD2,0x70A9,0x8907,0xA733, ++ 0xB62D,0x223C,0x9215,0x20C9,0x4987,0xFFAA,0x7850,0x7AA5, ++ 0x8F03,0xF859,0x8009,0x171A,0xDA65,0x31D7,0xC684,0xB8D0, ++ 0xC382,0xB029,0x775A,0x111E,0xCB7B,0xFCA8,0xD66D,0x3A2C, ++ } ++}; ++ ++ /* ++********************************************************************** ++* Routine: Phase 1 -- generate P1K, given TA, TK, IV32 ++* ++* Inputs: ++* tk[] = temporal key [128 bits] ++* ta[] = transmitter's MAC address [ 48 bits] ++* iv32 = upper 32 bits of IV [ 32 bits] ++* Output: ++* p1k[] = Phase 1 key [ 80 bits] ++* ++* Note: ++* This function only needs to be called every 2**16 packets, ++* although in theory it could be called every packet. ++* ++********************************************************************** ++*/ ++static void phase1(u16 *p1k,const u8 *tk,const u8 *ta,u32 iv32) ++{ ++ sint i; ++_func_enter_; ++ /* Initialize the 80 bits of P1K[] from IV32 and TA[0..5] */ ++ p1k[0] = Lo16(iv32); ++ p1k[1] = Hi16(iv32); ++ p1k[2] = Mk16(ta[1],ta[0]); /* use TA[] as little-endian */ ++ p1k[3] = Mk16(ta[3],ta[2]); ++ p1k[4] = Mk16(ta[5],ta[4]); ++ ++ /* Now compute an unbalanced Feistel cipher with 80-bit block */ ++ /* size on the 80-bit block P1K[], using the 128-bit key TK[] */ ++ for (i=0; i < PHASE1_LOOP_CNT ;i++) ++ { /* Each add operation here is mod 2**16 */ ++ p1k[0] += _S_(p1k[4] ^ TK16((i&1)+0)); ++ p1k[1] += _S_(p1k[0] ^ TK16((i&1)+2)); ++ p1k[2] += _S_(p1k[1] ^ TK16((i&1)+4)); ++ p1k[3] += _S_(p1k[2] ^ TK16((i&1)+6)); ++ p1k[4] += _S_(p1k[3] ^ TK16((i&1)+0)); ++ p1k[4] += (unsigned short)i; /* avoid "slide attacks" */ ++ } ++_func_exit_; ++} ++ ++ ++/* ++********************************************************************** ++* Routine: Phase 2 -- generate RC4KEY, given TK, P1K, IV16 ++* ++* Inputs: ++* tk[] = Temporal key [128 bits] ++* p1k[] = Phase 1 output key [ 80 bits] ++* iv16 = low 16 bits of IV counter [ 16 bits] ++* Output: ++* rc4key[] = the key used to encrypt the packet [128 bits] ++* ++* Note: ++* The value {TA,IV32,IV16} for Phase1/Phase2 must be unique ++* across all packets using the same key TK value. Then, for a ++* given value of TK[], this TKIP48 construction guarantees that ++* the final RC4KEY value is unique across all packets. ++* ++* Suggested implementation optimization: if PPK[] is "overlaid" ++* appropriately on RC4KEY[], there is no need for the final ++* for loop below that copies the PPK[] result into RC4KEY[]. ++* ++********************************************************************** ++*/ ++static void phase2(u8 *rc4key,const u8 *tk,const u16 *p1k,u16 iv16) ++{ ++ sint i; ++ u16 PPK[6]; /* temporary key for mixing */ ++_func_enter_; ++ /* Note: all adds in the PPK[] equations below are mod 2**16 */ ++ for (i=0;i<5;i++) PPK[i]=p1k[i]; /* first, copy P1K to PPK */ ++ PPK[5] = p1k[4] +iv16; /* next, add in IV16 */ ++ ++ /* Bijective non-linear mixing of the 96 bits of PPK[0..5] */ ++ PPK[0] += _S_(PPK[5] ^ TK16(0)); /* Mix key in each "round" */ ++ PPK[1] += _S_(PPK[0] ^ TK16(1)); ++ PPK[2] += _S_(PPK[1] ^ TK16(2)); ++ PPK[3] += _S_(PPK[2] ^ TK16(3)); ++ PPK[4] += _S_(PPK[3] ^ TK16(4)); ++ PPK[5] += _S_(PPK[4] ^ TK16(5)); /* Total # S-box lookups == 6 */ ++ ++ /* Final sweep: bijective, "linear". Rotates kill LSB correlations */ ++ PPK[0] += RotR1(PPK[5] ^ TK16(6)); ++ PPK[1] += RotR1(PPK[0] ^ TK16(7)); /* Use all of TK[] in Phase2 */ ++ PPK[2] += RotR1(PPK[1]); ++ PPK[3] += RotR1(PPK[2]); ++ PPK[4] += RotR1(PPK[3]); ++ PPK[5] += RotR1(PPK[4]); ++ /* Note: At this point, for a given key TK[0..15], the 96-bit output */ ++ /* value PPK[0..5] is guaranteed to be unique, as a function */ ++ /* of the 96-bit "input" value {TA,IV32,IV16}. That is, P1K */ ++ /* is now a keyed permutation of {TA,IV32,IV16}. */ ++ ++ /* Set RC4KEY[0..3], which includes "cleartext" portion of RC4 key */ ++ rc4key[0] = Hi8(iv16); /* RC4KEY[0..2] is the WEP IV */ ++ rc4key[1] =(Hi8(iv16) | 0x20) & 0x7F; /* Help avoid weak (FMS) keys */ ++ rc4key[2] = Lo8(iv16); ++ rc4key[3] = Lo8((PPK[5] ^ TK16(0)) >> 1); ++ ++ ++ /* Copy 96 bits of PPK[0..5] to RC4KEY[4..15] (little-endian) */ ++ for (i=0;i<6;i++) ++ { ++ rc4key[4+2*i] = Lo8(PPK[i]); ++ rc4key[5+2*i] = Hi8(PPK[i]); ++ } ++_func_exit_; ++} ++ ++ ++//The hlen isn't include the IV ++u32 rtw_tkip_encrypt(_adapter *padapter, u8 *pxmitframe) ++{ // exclude ICV ++ u16 pnl; ++ u32 pnh; ++ u8 rc4key[16]; ++ u8 ttkey[16]; ++ u8 crc[4]; ++ struct arc4context mycontext; ++ sint curfragnum,length; ++ u32 prwskeylen; ++ ++ u8 *pframe, *payload,*iv,*prwskey; ++ union pn48 dot11txpn; ++ struct sta_info *stainfo; ++ struct pkt_attrib *pattrib = &((struct xmit_frame *)pxmitframe)->attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ u32 res=_SUCCESS; ++_func_enter_; ++ ++ if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL) ++ return _FAIL; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE + ++ (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ); ++#else ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET; ++#endif ++ ++ //4 start to encrypt each fragment ++ if(pattrib->encrypt==_TKIP_){ ++ ++ if(pattrib->psta) ++ { ++ stainfo = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] ); ++ } ++ ++ if (stainfo!=NULL){ ++ ++ if(!(stainfo->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state); ++ return _FAIL; ++ } ++ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_encrypt: stainfo!=NULL!!!\n")); ++ ++ if(IS_MCAST(pattrib->ra)) ++ { ++ prwskey=psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey; ++ } ++ else ++ { ++ prwskey=&stainfo->dot118021x_UncstKey.skey[0]; ++ } ++ ++ prwskeylen=16; ++ ++ for(curfragnum=0;curfragnumnr_frags;curfragnum++){ ++ iv=pframe+pattrib->hdrlen; ++ payload=pframe+pattrib->iv_len+pattrib->hdrlen; ++ ++ GET_TKIP_PN(iv, dot11txpn); ++ ++ pnl=(u16)(dot11txpn.val); ++ pnh=(u32)(dot11txpn.val>>16); ++ ++ phase1((u16 *)&ttkey[0],prwskey,&pattrib->ta[0],pnh); ++ ++ phase2(&rc4key[0],prwskey,(u16 *)&ttkey[0],pnl); ++ ++ if((curfragnum+1)==pattrib->nr_frags){ //4 the last fragment ++ length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len; ++ RT_TRACE(_module_rtl871x_security_c_,_drv_info_,("pattrib->iv_len =%x, pattrib->icv_len =%x\n", pattrib->iv_len,pattrib->icv_len)); ++ *((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));/* modified by Amy*/ ++ ++ arcfour_init(&mycontext, rc4key,16); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ arcfour_encrypt(&mycontext, payload+length, crc, 4); ++ ++ } ++ else{ ++ length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ; ++ *((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));/* modified by Amy*/ ++ arcfour_init(&mycontext,rc4key,16); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ arcfour_encrypt(&mycontext, payload+length, crc, 4); ++ ++ pframe+=pxmitpriv->frag_len; ++ pframe=(u8 *)RND4((SIZE_PTR)(pframe)); ++ ++ } ++ } ++ ++ ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_encrypt: stainfo==NULL!!!\n")); ++ DBG_871X("%s, psta==NUL\n", __func__); ++ res=_FAIL; ++ } ++ ++ } ++_func_exit_; ++ return res; ++ ++} ++ ++ ++//The hlen isn't include the IV ++u32 rtw_tkip_decrypt(_adapter *padapter, u8 *precvframe) ++{ // exclude ICV ++ u16 pnl; ++ u32 pnh; ++ u8 rc4key[16]; ++ u8 ttkey[16]; ++ u8 crc[4]; ++ struct arc4context mycontext; ++ sint length; ++ u32 prwskeylen; ++ ++ u8 *pframe, *payload,*iv,*prwskey; ++ union pn48 dot11txpn; ++ struct sta_info *stainfo; ++ struct rx_pkt_attrib *prxattrib = &((union recv_frame *)precvframe)->u.hdr.attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++// struct recv_priv *precvpriv=&padapter->recvpriv; ++ u32 res=_SUCCESS; ++ ++_func_enter_; ++ ++ pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data; ++ ++ //4 start to decrypt recvframe ++ if(prxattrib->encrypt==_TKIP_){ ++ ++ stainfo=rtw_get_stainfo(&padapter->stapriv ,&prxattrib->ta[0] ); ++ if (stainfo!=NULL){ ++ ++ if(IS_MCAST(prxattrib->ra)) ++ { ++ static u32 start = 0; ++ static u32 no_gkey_bc_cnt = 0; ++ static u32 no_gkey_mc_cnt = 0; ++ ++ if(psecuritypriv->binstallGrpkey==_FALSE) ++ { ++ res=_FAIL; ++ ++ if (start == 0) ++ start = rtw_get_current_time(); ++ ++ if (is_broadcast_mac_addr(prxattrib->ra)) ++ no_gkey_bc_cnt++; ++ else ++ no_gkey_mc_cnt++; ++ ++ if (rtw_get_passing_time_ms(start) > 1000) { ++ if (no_gkey_bc_cnt || no_gkey_mc_cnt) { ++ DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n", ++ FUNC_ADPT_ARG(padapter), no_gkey_bc_cnt, no_gkey_mc_cnt); ++ } ++ start = rtw_get_current_time(); ++ no_gkey_bc_cnt = 0; ++ no_gkey_mc_cnt = 0; ++ } ++ goto exit; ++ } ++ ++ if (no_gkey_bc_cnt || no_gkey_mc_cnt) { ++ DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n", ++ FUNC_ADPT_ARG(padapter), no_gkey_bc_cnt, no_gkey_mc_cnt); ++ } ++ start = 0; ++ no_gkey_bc_cnt = 0; ++ no_gkey_mc_cnt = 0; ++ ++ //DBG_871X("rx bc/mc packets, to perform sw rtw_tkip_decrypt\n"); ++ //prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey; ++ prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; ++ prwskeylen=16; ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_decrypt: stainfo!=NULL!!!\n")); ++ prwskey=&stainfo->dot118021x_UncstKey.skey[0]; ++ prwskeylen=16; ++ } ++ ++ iv=pframe+prxattrib->hdrlen; ++ payload=pframe+prxattrib->iv_len+prxattrib->hdrlen; ++ length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len; ++ ++ GET_TKIP_PN(iv, dot11txpn); ++ ++ pnl=(u16)(dot11txpn.val); ++ pnh=(u32)(dot11txpn.val>>16); ++ ++ phase1((u16 *)&ttkey[0],prwskey,&prxattrib->ta[0],pnh); ++ phase2(&rc4key[0],prwskey,(unsigned short *)&ttkey[0],pnl); ++ ++ //4 decrypt payload include icv ++ ++ arcfour_init(&mycontext, rc4key,16); ++ arcfour_encrypt(&mycontext, payload, payload, length); ++ ++ *((u32 *)crc)=le32_to_cpu(getcrc32(payload,length-4)); ++ ++ if(crc[3]!=payload[length-1] || crc[2]!=payload[length-2] || crc[1]!=payload[length-3] || crc[0]!=payload[length-4]) ++ { ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_wep_decrypt:icv error crc[3](%x)!=payload[length-1](%x) || crc[2](%x)!=payload[length-2](%x) || crc[1](%x)!=payload[length-3](%x) || crc[0](%x)!=payload[length-4](%x)\n", ++ crc[3],payload[length-1],crc[2],payload[length-2],crc[1],payload[length-3],crc[0],payload[length-4])); ++ res=_FAIL; ++ } ++ ++ ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_decrypt: stainfo==NULL!!!\n")); ++ res=_FAIL; ++ } ++ ++ } ++_func_exit_; ++exit: ++ return res; ++ ++} ++ ++ ++//3 =====AES related===== ++ ++ ++ ++#define MAX_MSG_SIZE 2048 ++/*****************************/ ++/******** SBOX Table *********/ ++/*****************************/ ++ ++ static u8 sbox_table[256] = ++ { ++ 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, ++ 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76, ++ 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, ++ 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0, ++ 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, ++ 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15, ++ 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, ++ 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75, ++ 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, ++ 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84, ++ 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, ++ 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf, ++ 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, ++ 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8, ++ 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, ++ 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2, ++ 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, ++ 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73, ++ 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, ++ 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb, ++ 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, ++ 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79, ++ 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, ++ 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08, ++ 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, ++ 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a, ++ 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, ++ 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e, ++ 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, ++ 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf, ++ 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, ++ 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 ++ }; ++ ++/*****************************/ ++/**** Function Prototypes ****/ ++/*****************************/ ++ ++static void bitwise_xor(u8 *ina, u8 *inb, u8 *out); ++static void construct_mic_iv( ++ u8 *mic_header1, ++ sint qc_exists, ++ sint a4_exists, ++ u8 *mpdu, ++ uint payload_length, ++ u8 * pn_vector, ++ uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use ++static void construct_mic_header1( ++ u8 *mic_header1, ++ sint header_length, ++ u8 *mpdu, ++ uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use ++static void construct_mic_header2( ++ u8 *mic_header2, ++ u8 *mpdu, ++ sint a4_exists, ++ sint qc_exists); ++static void construct_ctr_preload( ++ u8 *ctr_preload, ++ sint a4_exists, ++ sint qc_exists, ++ u8 *mpdu, ++ u8 *pn_vector, ++ sint c, ++ uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use ++static void xor_128(u8 *a, u8 *b, u8 *out); ++static void xor_32(u8 *a, u8 *b, u8 *out); ++static u8 sbox(u8 a); ++static void next_key(u8 *key, sint round); ++static void byte_sub(u8 *in, u8 *out); ++static void shift_row(u8 *in, u8 *out); ++static void mix_column(u8 *in, u8 *out); ++#ifndef PLATFORM_FREEBSD ++static void add_round_key( u8 *shiftrow_in, ++ u8 *mcol_in, ++ u8 *block_in, ++ sint round, ++ u8 *out); ++#endif //PLATFORM_FREEBSD ++static void aes128k128d(u8 *key, u8 *data, u8 *ciphertext); ++ ++ ++/****************************************/ ++/* aes128k128d() */ ++/* Performs a 128 bit AES encrypt with */ ++/* 128 bit data. */ ++/****************************************/ ++static void xor_128(u8 *a, u8 *b, u8 *out) ++{ ++ sint i; ++_func_enter_; ++ for (i=0;i<16; i++) ++ { ++ out[i] = a[i] ^ b[i]; ++ } ++_func_exit_; ++} ++ ++ ++static void xor_32(u8 *a, u8 *b, u8 *out) ++{ ++ sint i; ++_func_enter_; ++ for (i=0;i<4; i++) ++ { ++ out[i] = a[i] ^ b[i]; ++ } ++_func_exit_; ++} ++ ++ ++static u8 sbox(u8 a) ++{ ++ return sbox_table[(sint)a]; ++} ++ ++ ++static void next_key(u8 *key, sint round) ++{ ++ u8 rcon; ++ u8 sbox_key[4]; ++ u8 rcon_table[12] = ++ { ++ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, ++ 0x1b, 0x36, 0x36, 0x36 ++ }; ++_func_enter_; ++ sbox_key[0] = sbox(key[13]); ++ sbox_key[1] = sbox(key[14]); ++ sbox_key[2] = sbox(key[15]); ++ sbox_key[3] = sbox(key[12]); ++ ++ rcon = rcon_table[round]; ++ ++ xor_32(&key[0], sbox_key, &key[0]); ++ key[0] = key[0] ^ rcon; ++ ++ xor_32(&key[4], &key[0], &key[4]); ++ xor_32(&key[8], &key[4], &key[8]); ++ xor_32(&key[12], &key[8], &key[12]); ++_func_exit_; ++} ++ ++ ++static void byte_sub(u8 *in, u8 *out) ++{ ++ sint i; ++_func_enter_; ++ for (i=0; i< 16; i++) ++ { ++ out[i] = sbox(in[i]); ++ } ++_func_exit_; ++} ++ ++ ++static void shift_row(u8 *in, u8 *out) ++{ ++_func_enter_; ++ out[0] = in[0]; ++ out[1] = in[5]; ++ out[2] = in[10]; ++ out[3] = in[15]; ++ out[4] = in[4]; ++ out[5] = in[9]; ++ out[6] = in[14]; ++ out[7] = in[3]; ++ out[8] = in[8]; ++ out[9] = in[13]; ++ out[10] = in[2]; ++ out[11] = in[7]; ++ out[12] = in[12]; ++ out[13] = in[1]; ++ out[14] = in[6]; ++ out[15] = in[11]; ++_func_exit_; ++} ++ ++ ++static void mix_column(u8 *in, u8 *out) ++{ ++ sint i; ++ u8 add1b[4]; ++ u8 add1bf7[4]; ++ u8 rotl[4]; ++ u8 swap_halfs[4]; ++ u8 andf7[4]; ++ u8 rotr[4]; ++ u8 temp[4]; ++ u8 tempb[4]; ++_func_enter_; ++ for (i=0 ; i<4; i++) ++ { ++ if ((in[i] & 0x80)== 0x80) ++ add1b[i] = 0x1b; ++ else ++ add1b[i] = 0x00; ++ } ++ ++ swap_halfs[0] = in[2]; /* Swap halfs */ ++ swap_halfs[1] = in[3]; ++ swap_halfs[2] = in[0]; ++ swap_halfs[3] = in[1]; ++ ++ rotl[0] = in[3]; /* Rotate left 8 bits */ ++ rotl[1] = in[0]; ++ rotl[2] = in[1]; ++ rotl[3] = in[2]; ++ ++ andf7[0] = in[0] & 0x7f; ++ andf7[1] = in[1] & 0x7f; ++ andf7[2] = in[2] & 0x7f; ++ andf7[3] = in[3] & 0x7f; ++ ++ for (i = 3; i>0; i--) /* logical shift left 1 bit */ ++ { ++ andf7[i] = andf7[i] << 1; ++ if ((andf7[i-1] & 0x80) == 0x80) ++ { ++ andf7[i] = (andf7[i] | 0x01); ++ } ++ } ++ andf7[0] = andf7[0] << 1; ++ andf7[0] = andf7[0] & 0xfe; ++ ++ xor_32(add1b, andf7, add1bf7); ++ ++ xor_32(in, add1bf7, rotr); ++ ++ temp[0] = rotr[0]; /* Rotate right 8 bits */ ++ rotr[0] = rotr[1]; ++ rotr[1] = rotr[2]; ++ rotr[2] = rotr[3]; ++ rotr[3] = temp[0]; ++ ++ xor_32(add1bf7, rotr, temp); ++ xor_32(swap_halfs, rotl,tempb); ++ xor_32(temp, tempb, out); ++_func_exit_; ++} ++ ++ ++static void aes128k128d(u8 *key, u8 *data, u8 *ciphertext) ++{ ++ sint round; ++ sint i; ++ u8 intermediatea[16]; ++ u8 intermediateb[16]; ++ u8 round_key[16]; ++_func_enter_; ++ for(i=0; i<16; i++) round_key[i] = key[i]; ++ ++ for (round = 0; round < 11; round++) ++ { ++ if (round == 0) ++ { ++ xor_128(round_key, data, ciphertext); ++ next_key(round_key, round); ++ } ++ else if (round == 10) ++ { ++ byte_sub(ciphertext, intermediatea); ++ shift_row(intermediatea, intermediateb); ++ xor_128(intermediateb, round_key, ciphertext); ++ } ++ else /* 1 - 9 */ ++ { ++ byte_sub(ciphertext, intermediatea); ++ shift_row(intermediatea, intermediateb); ++ mix_column(&intermediateb[0], &intermediatea[0]); ++ mix_column(&intermediateb[4], &intermediatea[4]); ++ mix_column(&intermediateb[8], &intermediatea[8]); ++ mix_column(&intermediateb[12], &intermediatea[12]); ++ xor_128(intermediatea, round_key, ciphertext); ++ next_key(round_key, round); ++ } ++ } ++_func_exit_; ++} ++ ++ ++/************************************************/ ++/* construct_mic_iv() */ ++/* Builds the MIC IV from header fields and PN */ ++/* Baron think the function is construct CCM */ ++/* nonce */ ++/************************************************/ ++static void construct_mic_iv( ++ u8 *mic_iv, ++ sint qc_exists, ++ sint a4_exists, ++ u8 *mpdu, ++ uint payload_length, ++ u8 *pn_vector, ++ uint frtype// add for CONFIG_IEEE80211W, none 11w also can use ++ ) ++{ ++ sint i; ++_func_enter_; ++ mic_iv[0] = 0x59; ++ if (qc_exists && a4_exists) mic_iv[1] = mpdu[30] & 0x0f; /* QoS_TC */ ++ if (qc_exists && !a4_exists) mic_iv[1] = mpdu[24] & 0x0f; /* mute bits 7-4 */ ++ if (!qc_exists) mic_iv[1] = 0x00; ++#ifdef CONFIG_IEEE80211W ++ //802.11w management frame should set management bit(4) ++ if(frtype == WIFI_MGT_TYPE) ++ mic_iv[1] |= BIT(4); ++#endif //CONFIG_IEEE80211W ++ for (i = 2; i < 8; i++) ++ mic_iv[i] = mpdu[i + 8]; /* mic_iv[2:7] = A2[0:5] = mpdu[10:15] */ ++ #ifdef CONSISTENT_PN_ORDER ++ for (i = 8; i < 14; i++) ++ mic_iv[i] = pn_vector[i - 8]; /* mic_iv[8:13] = PN[0:5] */ ++ #else ++ for (i = 8; i < 14; i++) ++ mic_iv[i] = pn_vector[13 - i]; /* mic_iv[8:13] = PN[5:0] */ ++ #endif ++ mic_iv[14] = (unsigned char) (payload_length / 256); ++ mic_iv[15] = (unsigned char) (payload_length % 256); ++_func_exit_; ++} ++ ++ ++/************************************************/ ++/* construct_mic_header1() */ ++/* Builds the first MIC header block from */ ++/* header fields. */ ++/* Build AAD SC,A1,A2 */ ++/************************************************/ ++static void construct_mic_header1( ++ u8 *mic_header1, ++ sint header_length, ++ u8 *mpdu, ++ uint frtype// add for CONFIG_IEEE80211W, none 11w also can use ++ ) ++{ ++_func_enter_; ++ mic_header1[0] = (u8)((header_length - 2) / 256); ++ mic_header1[1] = (u8)((header_length - 2) % 256); ++#ifdef CONFIG_IEEE80211W ++ //802.11w management frame don't AND subtype bits 4,5,6 of frame control field ++ if(frtype == WIFI_MGT_TYPE) ++ mic_header1[2] = mpdu[0]; ++ else ++#endif //CONFIG_IEEE80211W ++ mic_header1[2] = mpdu[0] & 0xcf; /* Mute CF poll & CF ack bits */ ++ ++ mic_header1[3] = mpdu[1] & 0xc7; /* Mute retry, more data and pwr mgt bits */ ++ mic_header1[4] = mpdu[4]; /* A1 */ ++ mic_header1[5] = mpdu[5]; ++ mic_header1[6] = mpdu[6]; ++ mic_header1[7] = mpdu[7]; ++ mic_header1[8] = mpdu[8]; ++ mic_header1[9] = mpdu[9]; ++ mic_header1[10] = mpdu[10]; /* A2 */ ++ mic_header1[11] = mpdu[11]; ++ mic_header1[12] = mpdu[12]; ++ mic_header1[13] = mpdu[13]; ++ mic_header1[14] = mpdu[14]; ++ mic_header1[15] = mpdu[15]; ++_func_exit_; ++} ++ ++ ++/************************************************/ ++/* construct_mic_header2() */ ++/* Builds the last MIC header block from */ ++/* header fields. */ ++/************************************************/ ++static void construct_mic_header2( ++ u8 *mic_header2, ++ u8 *mpdu, ++ sint a4_exists, ++ sint qc_exists ++ ) ++{ ++ sint i; ++_func_enter_; ++ for (i = 0; i<16; i++) mic_header2[i]=0x00; ++ ++ mic_header2[0] = mpdu[16]; /* A3 */ ++ mic_header2[1] = mpdu[17]; ++ mic_header2[2] = mpdu[18]; ++ mic_header2[3] = mpdu[19]; ++ mic_header2[4] = mpdu[20]; ++ mic_header2[5] = mpdu[21]; ++ ++ //mic_header2[6] = mpdu[22] & 0xf0; /* SC */ ++ mic_header2[6] = 0x00; ++ mic_header2[7] = 0x00; /* mpdu[23]; */ ++ ++ ++ if (!qc_exists && a4_exists) ++ { ++ for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i]; /* A4 */ ++ ++ } ++ ++ if (qc_exists && !a4_exists) ++ { ++ mic_header2[8] = mpdu[24] & 0x0f; /* mute bits 15 - 4 */ ++ mic_header2[9] = mpdu[25] & 0x00; ++ } ++ ++ if (qc_exists && a4_exists) ++ { ++ for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i]; /* A4 */ ++ ++ mic_header2[14] = mpdu[30] & 0x0f; ++ mic_header2[15] = mpdu[31] & 0x00; ++ } ++ ++_func_exit_; ++} ++ ++ ++/************************************************/ ++/* construct_mic_header2() */ ++/* Builds the last MIC header block from */ ++/* header fields. */ ++/* Baron think the function is construct CCM */ ++/* nonce */ ++/************************************************/ ++static void construct_ctr_preload( ++ u8 *ctr_preload, ++ sint a4_exists, ++ sint qc_exists, ++ u8 *mpdu, ++ u8 *pn_vector, ++ sint c, ++ uint frtype // add for CONFIG_IEEE80211W, none 11w also can use ++ ) ++{ ++ sint i = 0; ++_func_enter_; ++ for (i=0; i<16; i++) ctr_preload[i] = 0x00; ++ i = 0; ++ ++ ctr_preload[0] = 0x01; /* flag */ ++ if (qc_exists && a4_exists) ++ ctr_preload[1] = mpdu[30] & 0x0f; /* QoC_Control */ ++ if (qc_exists && !a4_exists) ++ ctr_preload[1] = mpdu[24] & 0x0f; ++#ifdef CONFIG_IEEE80211W ++ //802.11w management frame should set management bit(4) ++ if(frtype == WIFI_MGT_TYPE) ++ ctr_preload[1] |= BIT(4); ++#endif //CONFIG_IEEE80211W ++ for (i = 2; i < 8; i++) ++ ctr_preload[i] = mpdu[i + 8]; /* ctr_preload[2:7] = A2[0:5] = mpdu[10:15] */ ++ #ifdef CONSISTENT_PN_ORDER ++ for (i = 8; i < 14; i++) ++ ctr_preload[i] = pn_vector[i - 8]; /* ctr_preload[8:13] = PN[0:5] */ ++ #else ++ for (i = 8; i < 14; i++) ++ ctr_preload[i] = pn_vector[13 - i]; /* ctr_preload[8:13] = PN[5:0] */ ++ #endif ++ ctr_preload[14] = (unsigned char) (c / 256); /* Ctr */ ++ ctr_preload[15] = (unsigned char) (c % 256); ++_func_exit_; ++} ++ ++ ++/************************************/ ++/* bitwise_xor() */ ++/* A 128 bit, bitwise exclusive or */ ++/************************************/ ++static void bitwise_xor(u8 *ina, u8 *inb, u8 *out) ++{ ++ sint i; ++_func_enter_; ++ for (i=0; i<16; i++) ++ { ++ out[i] = ina[i] ^ inb[i]; ++ } ++_func_exit_; ++} ++ ++ ++static sint aes_cipher(u8 *key, uint hdrlen, ++ u8 *pframe, uint plen) ++{ ++// /*static*/ unsigned char message[MAX_MSG_SIZE]; ++ uint qc_exists, a4_exists, i, j, payload_remainder, ++ num_blocks, payload_index; ++ ++ u8 pn_vector[6]; ++ u8 mic_iv[16]; ++ u8 mic_header1[16]; ++ u8 mic_header2[16]; ++ u8 ctr_preload[16]; ++ ++ /* Intermediate Buffers */ ++ u8 chain_buffer[16]; ++ u8 aes_out[16]; ++ u8 padded_buffer[16]; ++ u8 mic[8]; ++// uint offset = 0; ++ uint frtype = GetFrameType(pframe); ++ uint frsubtype = GetFrameSubType(pframe); ++ ++_func_enter_; ++ frsubtype=frsubtype>>4; ++ ++ ++ _rtw_memset((void *)mic_iv, 0, 16); ++ _rtw_memset((void *)mic_header1, 0, 16); ++ _rtw_memset((void *)mic_header2, 0, 16); ++ _rtw_memset((void *)ctr_preload, 0, 16); ++ _rtw_memset((void *)chain_buffer, 0, 16); ++ _rtw_memset((void *)aes_out, 0, 16); ++ _rtw_memset((void *)padded_buffer, 0, 16); ++ ++ if ((hdrlen == WLAN_HDR_A3_LEN )||(hdrlen == WLAN_HDR_A3_QOS_LEN)) ++ a4_exists = 0; ++ else ++ a4_exists = 1; ++ ++ if ( ++ ((frtype|frsubtype) == WIFI_DATA_CFACK) || ++ ((frtype|frsubtype) == WIFI_DATA_CFPOLL)|| ++ ((frtype|frsubtype) == WIFI_DATA_CFACKPOLL)) ++ { ++ qc_exists = 1; ++ if(hdrlen != WLAN_HDR_A3_QOS_LEN){ ++ ++ hdrlen += 2; ++ } ++ } ++ // add for CONFIG_IEEE80211W, none 11w also can use ++ else if ((frtype == WIFI_DATA) && ++ ((frsubtype == 0x08) || ++ (frsubtype == 0x09)|| ++ (frsubtype == 0x0a)|| ++ (frsubtype == 0x0b))) ++ { ++ if(hdrlen != WLAN_HDR_A3_QOS_LEN){ ++ ++ hdrlen += 2; ++ } ++ qc_exists = 1; ++ } ++ else ++ qc_exists = 0; ++ ++ pn_vector[0]=pframe[hdrlen]; ++ pn_vector[1]=pframe[hdrlen+1]; ++ pn_vector[2]=pframe[hdrlen+4]; ++ pn_vector[3]=pframe[hdrlen+5]; ++ pn_vector[4]=pframe[hdrlen+6]; ++ pn_vector[5]=pframe[hdrlen+7]; ++ ++ construct_mic_iv( ++ mic_iv, ++ qc_exists, ++ a4_exists, ++ pframe, //message, ++ plen, ++ pn_vector, ++ frtype // add for CONFIG_IEEE80211W, none 11w also can use ++ ); ++ ++ construct_mic_header1( ++ mic_header1, ++ hdrlen, ++ pframe, //message ++ frtype // add for CONFIG_IEEE80211W, none 11w also can use ++ ); ++ construct_mic_header2( ++ mic_header2, ++ pframe, //message, ++ a4_exists, ++ qc_exists ++ ); ++ ++ ++ payload_remainder = plen % 16; ++ num_blocks = plen / 16; ++ ++ /* Find start of payload */ ++ payload_index = (hdrlen + 8); ++ ++ /* Calculate MIC */ ++ aes128k128d(key, mic_iv, aes_out); ++ bitwise_xor(aes_out, mic_header1, chain_buffer); ++ aes128k128d(key, chain_buffer, aes_out); ++ bitwise_xor(aes_out, mic_header2, chain_buffer); ++ aes128k128d(key, chain_buffer, aes_out); ++ ++ for (i = 0; i < num_blocks; i++) ++ { ++ bitwise_xor(aes_out, &pframe[payload_index], chain_buffer);//bitwise_xor(aes_out, &message[payload_index], chain_buffer); ++ ++ payload_index += 16; ++ aes128k128d(key, chain_buffer, aes_out); ++ } ++ ++ /* Add on the final payload block if it needs padding */ ++ if (payload_remainder > 0) ++ { ++ for (j = 0; j < 16; j++) padded_buffer[j] = 0x00; ++ for (j = 0; j < payload_remainder; j++) ++ { ++ padded_buffer[j] = pframe[payload_index++];//padded_buffer[j] = message[payload_index++]; ++ } ++ bitwise_xor(aes_out, padded_buffer, chain_buffer); ++ aes128k128d(key, chain_buffer, aes_out); ++ ++ } ++ ++ for (j = 0 ; j < 8; j++) mic[j] = aes_out[j]; ++ ++ /* Insert MIC into payload */ ++ for (j = 0; j < 8; j++) ++ pframe[payload_index+j] = mic[j]; //message[payload_index+j] = mic[j]; ++ ++ payload_index = hdrlen + 8; ++ for (i=0; i< num_blocks; i++) ++ { ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ pframe, //message, ++ pn_vector, ++ i+1, ++ frtype); // add for CONFIG_IEEE80211W, none 11w also can use ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, &pframe[payload_index], chain_buffer);//bitwise_xor(aes_out, &message[payload_index], chain_buffer); ++ for (j=0; j<16;j++) pframe[payload_index++] = chain_buffer[j];//for (j=0; j<16;j++) message[payload_index++] = chain_buffer[j]; ++ } ++ ++ if (payload_remainder > 0) /* If there is a short final block, then pad it,*/ ++ { /* encrypt it and copy the unpadded part back */ ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ pframe, //message, ++ pn_vector, ++ num_blocks+1, ++ frtype); // add for CONFIG_IEEE80211W, none 11w also can use ++ ++ for (j = 0; j < 16; j++) padded_buffer[j] = 0x00; ++ for (j = 0; j < payload_remainder; j++) ++ { ++ padded_buffer[j] = pframe[payload_index+j];//padded_buffer[j] = message[payload_index+j]; ++ } ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, padded_buffer, chain_buffer); ++ for (j=0; jattrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ ++// uint offset = 0; ++ u32 res=_SUCCESS; ++_func_enter_; ++ ++ if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL) ++ return _FAIL; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE + ++ (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ); ++#else ++ pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET; ++#endif ++ ++ //4 start to encrypt each fragment ++ if((pattrib->encrypt==_AES_)){ ++ ++ if(pattrib->psta) ++ { ++ stainfo = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] ); ++ } ++ ++ if (stainfo!=NULL){ ++ ++ if(!(stainfo->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state); ++ return _FAIL; ++ } ++ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo!=NULL!!!\n")); ++ ++ if(IS_MCAST(pattrib->ra)) ++ { ++ prwskey=psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey; ++ } ++ else ++ { ++ prwskey=&stainfo->dot118021x_UncstKey.skey[0]; ++ } ++ ++#ifdef CONFIG_TDLS //swencryption ++ { ++ struct sta_info *ptdls_sta; ++ ptdls_sta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->dst[0] ); ++ if((ptdls_sta != NULL) && (ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE) ) ++ { ++ DBG_871X("[%s] for tdls link\n", __FUNCTION__); ++ prwskey=&ptdls_sta->tpk.tk[0]; ++ } ++ } ++#endif //CONFIG_TDLS ++ ++ prwskeylen=16; ++ ++ for(curfragnum=0;curfragnumnr_frags;curfragnum++){ ++ ++ if((curfragnum+1)==pattrib->nr_frags){ //4 the last fragment ++ length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len; ++ ++ aes_cipher(prwskey,pattrib->hdrlen,pframe, length); ++ } ++ else{ ++ length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ; ++ ++ aes_cipher(prwskey,pattrib->hdrlen,pframe, length); ++ pframe+=pxmitpriv->frag_len; ++ pframe=(u8*)RND4((SIZE_PTR)(pframe)); ++ ++ } ++ } ++ ++ ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo==NULL!!!\n")); ++ DBG_871X("%s, psta==NUL\n", __func__); ++ res=_FAIL; ++ } ++ ++ } ++ ++ ++ ++_func_exit_; ++ return res; ++} ++ ++static sint aes_decipher(u8 *key, uint hdrlen, ++ u8 *pframe, uint plen) ++{ ++ static u8 message[MAX_MSG_SIZE]; ++ uint qc_exists, a4_exists, i, j, payload_remainder, ++ num_blocks, payload_index; ++ sint res = _SUCCESS; ++ u8 pn_vector[6]; ++ u8 mic_iv[16]; ++ u8 mic_header1[16]; ++ u8 mic_header2[16]; ++ u8 ctr_preload[16]; ++ ++ /* Intermediate Buffers */ ++ u8 chain_buffer[16]; ++ u8 aes_out[16]; ++ u8 padded_buffer[16]; ++ u8 mic[8]; ++ ++ ++// uint offset = 0; ++ uint frtype = GetFrameType(pframe); ++ uint frsubtype = GetFrameSubType(pframe); ++_func_enter_; ++ frsubtype=frsubtype>>4; ++ ++ ++ _rtw_memset((void *)mic_iv, 0, 16); ++ _rtw_memset((void *)mic_header1, 0, 16); ++ _rtw_memset((void *)mic_header2, 0, 16); ++ _rtw_memset((void *)ctr_preload, 0, 16); ++ _rtw_memset((void *)chain_buffer, 0, 16); ++ _rtw_memset((void *)aes_out, 0, 16); ++ _rtw_memset((void *)padded_buffer, 0, 16); ++ ++ //start to decrypt the payload ++ ++ num_blocks = (plen-8) / 16; //(plen including LLC, payload_length and mic ) ++ ++ payload_remainder = (plen-8) % 16; ++ ++ pn_vector[0] = pframe[hdrlen]; ++ pn_vector[1] = pframe[hdrlen+1]; ++ pn_vector[2] = pframe[hdrlen+4]; ++ pn_vector[3] = pframe[hdrlen+5]; ++ pn_vector[4] = pframe[hdrlen+6]; ++ pn_vector[5] = pframe[hdrlen+7]; ++ ++ if ((hdrlen == WLAN_HDR_A3_LEN )||(hdrlen == WLAN_HDR_A3_QOS_LEN)) ++ a4_exists = 0; ++ else ++ a4_exists = 1; ++ ++ if ( ++ ((frtype|frsubtype) == WIFI_DATA_CFACK) || ++ ((frtype|frsubtype) == WIFI_DATA_CFPOLL)|| ++ ((frtype|frsubtype) == WIFI_DATA_CFACKPOLL)) ++ { ++ qc_exists = 1; ++ if(hdrlen != WLAN_HDR_A3_QOS_LEN){ ++ ++ hdrlen += 2; ++ } ++ }//only for data packet . add for CONFIG_IEEE80211W, none 11w also can use ++ else if ((frtype == WIFI_DATA) && ++ ((frsubtype == 0x08) || ++ (frsubtype == 0x09)|| ++ (frsubtype == 0x0a)|| ++ (frsubtype == 0x0b))) ++ { ++ if(hdrlen != WLAN_HDR_A3_QOS_LEN){ ++ ++ hdrlen += 2; ++ } ++ qc_exists = 1; ++ } ++ else ++ qc_exists = 0; ++ ++ ++ // now, decrypt pframe with hdrlen offset and plen long ++ ++ payload_index = hdrlen + 8; // 8 is for extiv ++ ++ for (i=0; i< num_blocks; i++) ++ { ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ pframe, ++ pn_vector, ++ i+1, ++ frtype // add for CONFIG_IEEE80211W, none 11w also can use ++ ); ++ ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, &pframe[payload_index], chain_buffer); ++ ++ for (j=0; j<16;j++) pframe[payload_index++] = chain_buffer[j]; ++ } ++ ++ if (payload_remainder > 0) /* If there is a short final block, then pad it,*/ ++ { /* encrypt it and copy the unpadded part back */ ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ pframe, ++ pn_vector, ++ num_blocks+1, ++ frtype // add for CONFIG_IEEE80211W, none 11w also can use ++ ); ++ ++ for (j = 0; j < 16; j++) padded_buffer[j] = 0x00; ++ for (j = 0; j < payload_remainder; j++) ++ { ++ padded_buffer[j] = pframe[payload_index+j]; ++ } ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, padded_buffer, chain_buffer); ++ for (j=0; j 0) ++ { ++ for (j = 0; j < 16; j++) padded_buffer[j] = 0x00; ++ for (j = 0; j < payload_remainder; j++) ++ { ++ padded_buffer[j] = message[payload_index++]; ++ } ++ bitwise_xor(aes_out, padded_buffer, chain_buffer); ++ aes128k128d(key, chain_buffer, aes_out); ++ ++ } ++ ++ for (j = 0 ; j < 8; j++) mic[j] = aes_out[j]; ++ ++ /* Insert MIC into payload */ ++ for (j = 0; j < 8; j++) ++ message[payload_index+j] = mic[j]; ++ ++ payload_index = hdrlen + 8; ++ for (i=0; i< num_blocks; i++) ++ { ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ message, ++ pn_vector, ++ i+1, ++ frtype); // add for CONFIG_IEEE80211W, none 11w also can use ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, &message[payload_index], chain_buffer); ++ for (j=0; j<16;j++) message[payload_index++] = chain_buffer[j]; ++ } ++ ++ if (payload_remainder > 0) /* If there is a short final block, then pad it,*/ ++ { /* encrypt it and copy the unpadded part back */ ++ construct_ctr_preload( ++ ctr_preload, ++ a4_exists, ++ qc_exists, ++ message, ++ pn_vector, ++ num_blocks+1, ++ frtype); // add for CONFIG_IEEE80211W, none 11w also can use ++ ++ for (j = 0; j < 16; j++) padded_buffer[j] = 0x00; ++ for (j = 0; j < payload_remainder; j++) ++ { ++ padded_buffer[j] = message[payload_index+j]; ++ } ++ aes128k128d(key, ctr_preload, aes_out); ++ bitwise_xor(aes_out, padded_buffer, chain_buffer); ++ for (j=0; ju.hdr.attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++// struct recv_priv *precvpriv=&padapter->recvpriv; ++ u32 res=_SUCCESS; ++_func_enter_; ++ pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data; ++ //4 start to encrypt each fragment ++ if((prxattrib->encrypt==_AES_)){ ++ ++ stainfo=rtw_get_stainfo(&padapter->stapriv ,&prxattrib->ta[0] ); ++ if (stainfo!=NULL){ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_decrypt: stainfo!=NULL!!!\n")); ++ ++ if(IS_MCAST(prxattrib->ra)) ++ { ++ //in concurrent we should use sw descrypt in group key, so we remove this message ++ //DBG_871X("rx bc/mc packets, to perform sw rtw_aes_decrypt\n"); ++ //prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey; ++ if(psecuritypriv->binstallGrpkey==_FALSE) ++ { ++ res=_FAIL; ++ DBG_8192C("%s:rx bc/mc packets,but didn't install group key!!!!!!!!!!\n",__FUNCTION__); ++ goto exit; ++ } ++ prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; ++ ++ if(psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) ++ { ++ DBG_871X("not match packet_index=%d, install_index=%d \n" ++ , prxattrib->key_index, psecuritypriv->dot118021XGrpKeyid); ++ res=_FAIL; ++ goto exit; ++ } ++ } ++ else ++ { ++ prwskey=&stainfo->dot118021x_UncstKey.skey[0]; ++ } ++ ++ length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len; ++ /*// add for CONFIG_IEEE80211W, debug ++ if(0) ++ printk("@@@@@@@@@@@@@@@@@@ length=%d, prxattrib->hdrlen=%d, prxattrib->pkt_len=%d \n" ++ , length, prxattrib->hdrlen, prxattrib->pkt_len); ++ if(0) ++ { ++ int no; ++ //test print PSK ++ printk("PSK key below:\n"); ++ for(no=0;no<16;no++) ++ printk(" %02x ", prwskey[no]); ++ printk("\n"); ++ } ++ if(0) ++ { ++ int no; ++ //test print PSK ++ printk("frame:\n"); ++ for(no=0;nopkt_len;no++) ++ printk(" %02x ", pframe[no]); ++ printk("\n"); ++ }*/ ++ ++ res= aes_decipher(prwskey,prxattrib->hdrlen,pframe, length); ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo==NULL!!!\n")); ++ res=_FAIL; ++ } ++ ++ } ++_func_exit_; ++exit: ++ return res; ++} ++ ++#ifdef CONFIG_IEEE80211W ++u32 rtw_BIP_verify(_adapter *padapter, u8 *precvframe) ++{ ++ struct rx_pkt_attrib *pattrib = &((union recv_frame *)precvframe)->u.hdr.attrib; ++ u8 *pframe; ++ u8 *BIP_AAD, *p; ++ u32 res=_FAIL; ++ uint len, ori_len; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u8 mic[16]; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ori_len = pattrib->pkt_len-WLAN_HDR_A3_LEN+BIP_AAD_SIZE; ++ BIP_AAD = rtw_zmalloc(ori_len); ++ ++ if(BIP_AAD == NULL) ++ { ++ DBG_871X("BIP AAD allocate fail\n"); ++ return _FAIL; ++ } ++ //PKT start ++ pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data; ++ //mapping to wlan header ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ //save the frame body + MME ++ _rtw_memcpy(BIP_AAD+BIP_AAD_SIZE, pframe+WLAN_HDR_A3_LEN, pattrib->pkt_len-WLAN_HDR_A3_LEN); ++ //find MME IE pointer ++ p = rtw_get_ie(BIP_AAD+BIP_AAD_SIZE, _MME_IE_, &len, pattrib->pkt_len-WLAN_HDR_A3_LEN); ++ //Baron ++ if(p) ++ { ++ u16 keyid=0; ++ u64 temp_ipn=0; ++ //save packet number ++ _rtw_memcpy(&temp_ipn, p+4, 6); ++ temp_ipn = le64_to_cpu(temp_ipn); ++ //BIP packet number should bigger than previous BIP packet ++ if(temp_ipn <= pmlmeext->mgnt_80211w_IPN_rx) ++ { ++ DBG_871X("replay BIP packet\n"); ++ goto BIP_exit; ++ } ++ //copy key index ++ _rtw_memcpy(&keyid, p+2, 2); ++ keyid = le16_to_cpu(keyid); ++ if(keyid != padapter->securitypriv.dot11wBIPKeyid) ++ { ++ DBG_871X("BIP key index error!\n"); ++ goto BIP_exit; ++ } ++ //clear the MIC field of MME to zero ++ _rtw_memset(p+2+len-8, 0, 8); ++ ++ //conscruct AAD, copy frame control field ++ _rtw_memcpy(BIP_AAD, &pwlanhdr->frame_ctl, 2); ++ ClearRetry(BIP_AAD); ++ ClearPwrMgt(BIP_AAD); ++ ClearMData(BIP_AAD); ++ //conscruct AAD, copy address 1 to address 3 ++ _rtw_memcpy(BIP_AAD+2, pwlanhdr->addr1, 18); ++ ++ if(omac1_aes_128(padapter->securitypriv.dot11wBIPKey[padapter->securitypriv.dot11wBIPKeyid].skey ++ , BIP_AAD, ori_len, mic)) ++ goto BIP_exit; ++ ++ /*//management packet content ++ { ++ int pp; ++ DBG_871X("pkt: "); ++ for(pp=0;pp< pattrib->pkt_len; pp++) ++ printk(" %02x ", pframe[pp]); ++ DBG_871X("\n"); ++ //BIP AAD + management frame body + MME(MIC is zero) ++ DBG_871X("AAD+PKT: "); ++ for(pp=0;pp< ori_len; pp++) ++ DBG_871X(" %02x ", BIP_AAD[pp]); ++ DBG_871X("\n"); ++ //show the MIC result ++ DBG_871X("mic: "); ++ for(pp=0;pp<16; pp++) ++ DBG_871X(" %02x ", mic[pp]); ++ DBG_871X("\n"); ++ } ++ */ ++ //MIC field should be last 8 bytes of packet (packet without FCS) ++ if(_rtw_memcmp(mic, pframe+pattrib->pkt_len-8, 8)) ++ { ++ pmlmeext->mgnt_80211w_IPN_rx = temp_ipn; ++ res=_SUCCESS; ++ } ++ else ++ DBG_871X("BIP MIC error!\n"); ++ ++ } ++ else ++ res = RTW_RX_HANDLED; ++BIP_exit: ++ ++ rtw_mfree(BIP_AAD, ori_len); ++ return res; ++} ++#endif //CONFIG_IEEE80211W ++ ++#ifndef PLATFORM_FREEBSD ++/* compress 512-bits */ ++static int sha256_compress(struct sha256_state *md, unsigned char *buf) ++{ ++ u32 S[8], W[64], t0, t1; ++ u32 t; ++ int i; ++ ++ /* copy state into S */ ++ for (i = 0; i < 8; i++) { ++ S[i] = md->state[i]; ++ } ++ ++ /* copy the state into 512-bits into W[0..15] */ ++ for (i = 0; i < 16; i++) ++ W[i] = WPA_GET_BE32(buf + (4 * i)); ++ ++ /* fill W[16..63] */ ++ for (i = 16; i < 64; i++) { ++ W[i] = Gamma1(W[i - 2]) + W[i - 7] + Gamma0(W[i - 15]) + ++ W[i - 16]; ++ } ++ ++ /* Compress */ ++#define RND(a,b,c,d,e,f,g,h,i) \ ++ t0 = h + Sigma1(e) + Ch(e, f, g) + K[i] + W[i]; \ ++ t1 = Sigma0(a) + Maj(a, b, c); \ ++ d += t0; \ ++ h = t0 + t1; ++ ++ for (i = 0; i < 64; ++i) { ++ RND(S[0], S[1], S[2], S[3], S[4], S[5], S[6], S[7], i); ++ t = S[7]; S[7] = S[6]; S[6] = S[5]; S[5] = S[4]; ++ S[4] = S[3]; S[3] = S[2]; S[2] = S[1]; S[1] = S[0]; S[0] = t; ++ } ++ ++ /* feedback */ ++ for (i = 0; i < 8; i++) { ++ md->state[i] = md->state[i] + S[i]; ++ } ++ return 0; ++} ++ ++/* Initialize the hash state */ ++static void sha256_init(struct sha256_state *md) ++{ ++ md->curlen = 0; ++ md->length = 0; ++ md->state[0] = 0x6A09E667UL; ++ md->state[1] = 0xBB67AE85UL; ++ md->state[2] = 0x3C6EF372UL; ++ md->state[3] = 0xA54FF53AUL; ++ md->state[4] = 0x510E527FUL; ++ md->state[5] = 0x9B05688CUL; ++ md->state[6] = 0x1F83D9ABUL; ++ md->state[7] = 0x5BE0CD19UL; ++} ++ ++/** ++ Process a block of memory though the hash ++ @param md The hash state ++ @param in The data to hash ++ @param inlen The length of the data (octets) ++ @return CRYPT_OK if successful ++*/ ++static int sha256_process(struct sha256_state *md, unsigned char *in, ++ unsigned long inlen) ++{ ++ unsigned long n; ++#define block_size 64 ++ ++ if (md->curlen > sizeof(md->buf)) ++ return -1; ++ ++ while (inlen > 0) { ++ if (md->curlen == 0 && inlen >= block_size) { ++ if (sha256_compress(md, (unsigned char *) in) < 0) ++ return -1; ++ md->length += block_size * 8; ++ in += block_size; ++ inlen -= block_size; ++ } else { ++ n = MIN(inlen, (block_size - md->curlen)); ++ _rtw_memcpy(md->buf + md->curlen, in, n); ++ md->curlen += n; ++ in += n; ++ inlen -= n; ++ if (md->curlen == block_size) { ++ if (sha256_compress(md, md->buf) < 0) ++ return -1; ++ md->length += 8 * block_size; ++ md->curlen = 0; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++ ++/** ++ Terminate the hash to get the digest ++ @param md The hash state ++ @param out [out] The destination of the hash (32 bytes) ++ @return CRYPT_OK if successful ++*/ ++static int sha256_done(struct sha256_state *md, unsigned char *out) ++{ ++ int i; ++ ++ if (md->curlen >= sizeof(md->buf)) ++ return -1; ++ ++ /* increase the length of the message */ ++ md->length += md->curlen * 8; ++ ++ /* append the '1' bit */ ++ md->buf[md->curlen++] = (unsigned char) 0x80; ++ ++ /* if the length is currently above 56 bytes we append zeros ++ * then compress. Then we can fall back to padding zeros and length ++ * encoding like normal. ++ */ ++ if (md->curlen > 56) { ++ while (md->curlen < 64) { ++ md->buf[md->curlen++] = (unsigned char) 0; ++ } ++ sha256_compress(md, md->buf); ++ md->curlen = 0; ++ } ++ ++ /* pad upto 56 bytes of zeroes */ ++ while (md->curlen < 56) { ++ md->buf[md->curlen++] = (unsigned char) 0; ++ } ++ ++ /* store length */ ++ WPA_PUT_BE64(md->buf + 56, md->length); ++ sha256_compress(md, md->buf); ++ ++ /* copy output */ ++ for (i = 0; i < 8; i++) ++ WPA_PUT_BE32(out + (4 * i), md->state[i]); ++ ++ return 0; ++} ++ ++/** ++ * sha256_vector - SHA256 hash for data vector ++ * @num_elem: Number of elements in the data vector ++ * @addr: Pointers to the data areas ++ * @len: Lengths of the data blocks ++ * @mac: Buffer for the hash ++ * Returns: 0 on success, -1 of failure ++ */ ++static int sha256_vector(size_t num_elem, u8 *addr[], size_t *len, ++ u8 *mac) ++{ ++ struct sha256_state ctx; ++ size_t i; ++ ++ sha256_init(&ctx); ++ for (i = 0; i < num_elem; i++) ++ if (sha256_process(&ctx, addr[i], len[i])) ++ return -1; ++ if (sha256_done(&ctx, mac)) ++ return -1; ++ return 0; ++} ++ ++static u8 os_strlen(const char *s) ++{ ++ const char *p = s; ++ while (*p) ++ p++; ++ return p - s; ++} ++ ++static int os_memcmp(void *s1, void *s2, u8 n) ++{ ++ unsigned char *p1 = s1, *p2 = s2; ++ ++ if (n == 0) ++ return 0; ++ ++ while (*p1 == *p2) { ++ p1++; ++ p2++; ++ n--; ++ if (n == 0) ++ return 0; ++ } ++ ++ return *p1 - *p2; ++} ++ ++/** ++ * hmac_sha256_vector - HMAC-SHA256 over data vector (RFC 2104) ++ * @key: Key for HMAC operations ++ * @key_len: Length of the key in bytes ++ * @num_elem: Number of elements in the data vector ++ * @addr: Pointers to the data areas ++ * @len: Lengths of the data blocks ++ * @mac: Buffer for the hash (32 bytes) ++ */ ++static void hmac_sha256_vector(u8 *key, size_t key_len, size_t num_elem, ++ u8 *addr[], size_t *len, u8 *mac) ++{ ++ unsigned char k_pad[64]; /* padding - key XORd with ipad/opad */ ++ unsigned char tk[32]; ++ u8 *_addr[6]; ++ size_t _len[6], i; ++ ++ if (num_elem > 5) { ++ /* ++ * Fixed limit on the number of fragments to avoid having to ++ * allocate memory (which could fail). ++ */ ++ return; ++ } ++ ++ /* if key is longer than 64 bytes reset it to key = SHA256(key) */ ++ if (key_len > 64) { ++ sha256_vector(1, &key, &key_len, tk); ++ key = tk; ++ key_len = 32; ++ } ++ ++ /* the HMAC_SHA256 transform looks like: ++ * ++ * SHA256(K XOR opad, SHA256(K XOR ipad, text)) ++ * ++ * where K is an n byte key ++ * ipad is the byte 0x36 repeated 64 times ++ * opad is the byte 0x5c repeated 64 times ++ * and text is the data being protected */ ++ ++ /* start out by storing key in ipad */ ++ _rtw_memset(k_pad, 0, sizeof(k_pad)); ++ _rtw_memcpy(k_pad, key, key_len); ++ /* XOR key with ipad values */ ++ for (i = 0; i < 64; i++) ++ k_pad[i] ^= 0x36; ++ ++ /* perform inner SHA256 */ ++ _addr[0] = k_pad; ++ _len[0] = 64; ++ for (i = 0; i < num_elem; i++) { ++ _addr[i + 1] = addr[i]; ++ _len[i + 1] = len[i]; ++ } ++ sha256_vector(1 + num_elem, _addr, _len, mac); ++ ++ _rtw_memset(k_pad, 0, sizeof(k_pad)); ++ _rtw_memcpy(k_pad, key, key_len); ++ /* XOR key with opad values */ ++ for (i = 0; i < 64; i++) ++ k_pad[i] ^= 0x5c; ++ ++ /* perform outer SHA256 */ ++ _addr[0] = k_pad; ++ _len[0] = 64; ++ _addr[1] = mac; ++ _len[1] = 32; ++ sha256_vector(2, _addr, _len, mac); ++} ++#endif //PLATFORM_FREEBSD ++/** ++ * sha256_prf - SHA256-based Pseudo-Random Function (IEEE 802.11r, 8.5.1.5.2) ++ * @key: Key for PRF ++ * @key_len: Length of the key in bytes ++ * @label: A unique label for each purpose of the PRF ++ * @data: Extra data to bind into the key ++ * @data_len: Length of the data ++ * @buf: Buffer for the generated pseudo-random key ++ * @buf_len: Number of bytes of key to generate ++ * ++ * This function is used to derive new, cryptographically separate keys from a ++ * given key. ++ */ ++#ifndef PLATFORM_FREEBSD //Baron ++static void sha256_prf(u8 *key, size_t key_len, char *label, ++ u8 *data, size_t data_len, u8 *buf, size_t buf_len) ++{ ++ u16 counter = 1; ++ size_t pos, plen; ++ u8 hash[SHA256_MAC_LEN]; ++ u8 *addr[4]; ++ size_t len[4]; ++ u8 counter_le[2], length_le[2]; ++ ++ addr[0] = counter_le; ++ len[0] = 2; ++ addr[1] = (u8 *) label; ++ len[1] = os_strlen(label); ++ addr[2] = data; ++ len[2] = data_len; ++ addr[3] = length_le; ++ len[3] = sizeof(length_le); ++ ++ WPA_PUT_LE16(length_le, buf_len * 8); ++ pos = 0; ++ while (pos < buf_len) { ++ plen = buf_len - pos; ++ WPA_PUT_LE16(counter_le, counter); ++ if (plen >= SHA256_MAC_LEN) { ++ hmac_sha256_vector(key, key_len, 4, addr, len, ++ &buf[pos]); ++ pos += SHA256_MAC_LEN; ++ } else { ++ hmac_sha256_vector(key, key_len, 4, addr, len, hash); ++ _rtw_memcpy(&buf[pos], hash, plen); ++ break; ++ } ++ counter++; ++ } ++} ++#endif //PLATFORM_FREEBSD Baron ++ ++/* AES tables*/ ++const u32 Te0[256] = { ++ 0xc66363a5U, 0xf87c7c84U, 0xee777799U, 0xf67b7b8dU, ++ 0xfff2f20dU, 0xd66b6bbdU, 0xde6f6fb1U, 0x91c5c554U, ++ 0x60303050U, 0x02010103U, 0xce6767a9U, 0x562b2b7dU, ++ 0xe7fefe19U, 0xb5d7d762U, 0x4dababe6U, 0xec76769aU, ++ 0x8fcaca45U, 0x1f82829dU, 0x89c9c940U, 0xfa7d7d87U, ++ 0xeffafa15U, 0xb25959ebU, 0x8e4747c9U, 0xfbf0f00bU, ++ 0x41adadecU, 0xb3d4d467U, 0x5fa2a2fdU, 0x45afafeaU, ++ 0x239c9cbfU, 0x53a4a4f7U, 0xe4727296U, 0x9bc0c05bU, ++ 0x75b7b7c2U, 0xe1fdfd1cU, 0x3d9393aeU, 0x4c26266aU, ++ 0x6c36365aU, 0x7e3f3f41U, 0xf5f7f702U, 0x83cccc4fU, ++ 0x6834345cU, 0x51a5a5f4U, 0xd1e5e534U, 0xf9f1f108U, ++ 0xe2717193U, 0xabd8d873U, 0x62313153U, 0x2a15153fU, ++ 0x0804040cU, 0x95c7c752U, 0x46232365U, 0x9dc3c35eU, ++ 0x30181828U, 0x379696a1U, 0x0a05050fU, 0x2f9a9ab5U, ++ 0x0e070709U, 0x24121236U, 0x1b80809bU, 0xdfe2e23dU, ++ 0xcdebeb26U, 0x4e272769U, 0x7fb2b2cdU, 0xea75759fU, ++ 0x1209091bU, 0x1d83839eU, 0x582c2c74U, 0x341a1a2eU, ++ 0x361b1b2dU, 0xdc6e6eb2U, 0xb45a5aeeU, 0x5ba0a0fbU, ++ 0xa45252f6U, 0x763b3b4dU, 0xb7d6d661U, 0x7db3b3ceU, ++ 0x5229297bU, 0xdde3e33eU, 0x5e2f2f71U, 0x13848497U, ++ 0xa65353f5U, 0xb9d1d168U, 0x00000000U, 0xc1eded2cU, ++ 0x40202060U, 0xe3fcfc1fU, 0x79b1b1c8U, 0xb65b5bedU, ++ 0xd46a6abeU, 0x8dcbcb46U, 0x67bebed9U, 0x7239394bU, ++ 0x944a4adeU, 0x984c4cd4U, 0xb05858e8U, 0x85cfcf4aU, ++ 0xbbd0d06bU, 0xc5efef2aU, 0x4faaaae5U, 0xedfbfb16U, ++ 0x864343c5U, 0x9a4d4dd7U, 0x66333355U, 0x11858594U, ++ 0x8a4545cfU, 0xe9f9f910U, 0x04020206U, 0xfe7f7f81U, ++ 0xa05050f0U, 0x783c3c44U, 0x259f9fbaU, 0x4ba8a8e3U, ++ 0xa25151f3U, 0x5da3a3feU, 0x804040c0U, 0x058f8f8aU, ++ 0x3f9292adU, 0x219d9dbcU, 0x70383848U, 0xf1f5f504U, ++ 0x63bcbcdfU, 0x77b6b6c1U, 0xafdada75U, 0x42212163U, ++ 0x20101030U, 0xe5ffff1aU, 0xfdf3f30eU, 0xbfd2d26dU, ++ 0x81cdcd4cU, 0x180c0c14U, 0x26131335U, 0xc3ecec2fU, ++ 0xbe5f5fe1U, 0x359797a2U, 0x884444ccU, 0x2e171739U, ++ 0x93c4c457U, 0x55a7a7f2U, 0xfc7e7e82U, 0x7a3d3d47U, ++ 0xc86464acU, 0xba5d5de7U, 0x3219192bU, 0xe6737395U, ++ 0xc06060a0U, 0x19818198U, 0x9e4f4fd1U, 0xa3dcdc7fU, ++ 0x44222266U, 0x542a2a7eU, 0x3b9090abU, 0x0b888883U, ++ 0x8c4646caU, 0xc7eeee29U, 0x6bb8b8d3U, 0x2814143cU, ++ 0xa7dede79U, 0xbc5e5ee2U, 0x160b0b1dU, 0xaddbdb76U, ++ 0xdbe0e03bU, 0x64323256U, 0x743a3a4eU, 0x140a0a1eU, ++ 0x924949dbU, 0x0c06060aU, 0x4824246cU, 0xb85c5ce4U, ++ 0x9fc2c25dU, 0xbdd3d36eU, 0x43acacefU, 0xc46262a6U, ++ 0x399191a8U, 0x319595a4U, 0xd3e4e437U, 0xf279798bU, ++ 0xd5e7e732U, 0x8bc8c843U, 0x6e373759U, 0xda6d6db7U, ++ 0x018d8d8cU, 0xb1d5d564U, 0x9c4e4ed2U, 0x49a9a9e0U, ++ 0xd86c6cb4U, 0xac5656faU, 0xf3f4f407U, 0xcfeaea25U, ++ 0xca6565afU, 0xf47a7a8eU, 0x47aeaee9U, 0x10080818U, ++ 0x6fbabad5U, 0xf0787888U, 0x4a25256fU, 0x5c2e2e72U, ++ 0x381c1c24U, 0x57a6a6f1U, 0x73b4b4c7U, 0x97c6c651U, ++ 0xcbe8e823U, 0xa1dddd7cU, 0xe874749cU, 0x3e1f1f21U, ++ 0x964b4bddU, 0x61bdbddcU, 0x0d8b8b86U, 0x0f8a8a85U, ++ 0xe0707090U, 0x7c3e3e42U, 0x71b5b5c4U, 0xcc6666aaU, ++ 0x904848d8U, 0x06030305U, 0xf7f6f601U, 0x1c0e0e12U, ++ 0xc26161a3U, 0x6a35355fU, 0xae5757f9U, 0x69b9b9d0U, ++ 0x17868691U, 0x99c1c158U, 0x3a1d1d27U, 0x279e9eb9U, ++ 0xd9e1e138U, 0xebf8f813U, 0x2b9898b3U, 0x22111133U, ++ 0xd26969bbU, 0xa9d9d970U, 0x078e8e89U, 0x339494a7U, ++ 0x2d9b9bb6U, 0x3c1e1e22U, 0x15878792U, 0xc9e9e920U, ++ 0x87cece49U, 0xaa5555ffU, 0x50282878U, 0xa5dfdf7aU, ++ 0x038c8c8fU, 0x59a1a1f8U, 0x09898980U, 0x1a0d0d17U, ++ 0x65bfbfdaU, 0xd7e6e631U, 0x844242c6U, 0xd06868b8U, ++ 0x824141c3U, 0x299999b0U, 0x5a2d2d77U, 0x1e0f0f11U, ++ 0x7bb0b0cbU, 0xa85454fcU, 0x6dbbbbd6U, 0x2c16163aU, ++}; ++const u32 Td0[256] = { ++ 0x51f4a750U, 0x7e416553U, 0x1a17a4c3U, 0x3a275e96U, ++ 0x3bab6bcbU, 0x1f9d45f1U, 0xacfa58abU, 0x4be30393U, ++ 0x2030fa55U, 0xad766df6U, 0x88cc7691U, 0xf5024c25U, ++ 0x4fe5d7fcU, 0xc52acbd7U, 0x26354480U, 0xb562a38fU, ++ 0xdeb15a49U, 0x25ba1b67U, 0x45ea0e98U, 0x5dfec0e1U, ++ 0xc32f7502U, 0x814cf012U, 0x8d4697a3U, 0x6bd3f9c6U, ++ 0x038f5fe7U, 0x15929c95U, 0xbf6d7aebU, 0x955259daU, ++ 0xd4be832dU, 0x587421d3U, 0x49e06929U, 0x8ec9c844U, ++ 0x75c2896aU, 0xf48e7978U, 0x99583e6bU, 0x27b971ddU, ++ 0xbee14fb6U, 0xf088ad17U, 0xc920ac66U, 0x7dce3ab4U, ++ 0x63df4a18U, 0xe51a3182U, 0x97513360U, 0x62537f45U, ++ 0xb16477e0U, 0xbb6bae84U, 0xfe81a01cU, 0xf9082b94U, ++ 0x70486858U, 0x8f45fd19U, 0x94de6c87U, 0x527bf8b7U, ++ 0xab73d323U, 0x724b02e2U, 0xe31f8f57U, 0x6655ab2aU, ++ 0xb2eb2807U, 0x2fb5c203U, 0x86c57b9aU, 0xd33708a5U, ++ 0x302887f2U, 0x23bfa5b2U, 0x02036abaU, 0xed16825cU, ++ 0x8acf1c2bU, 0xa779b492U, 0xf307f2f0U, 0x4e69e2a1U, ++ 0x65daf4cdU, 0x0605bed5U, 0xd134621fU, 0xc4a6fe8aU, ++ 0x342e539dU, 0xa2f355a0U, 0x058ae132U, 0xa4f6eb75U, ++ 0x0b83ec39U, 0x4060efaaU, 0x5e719f06U, 0xbd6e1051U, ++ 0x3e218af9U, 0x96dd063dU, 0xdd3e05aeU, 0x4de6bd46U, ++ 0x91548db5U, 0x71c45d05U, 0x0406d46fU, 0x605015ffU, ++ 0x1998fb24U, 0xd6bde997U, 0x894043ccU, 0x67d99e77U, ++ 0xb0e842bdU, 0x07898b88U, 0xe7195b38U, 0x79c8eedbU, ++ 0xa17c0a47U, 0x7c420fe9U, 0xf8841ec9U, 0x00000000U, ++ 0x09808683U, 0x322bed48U, 0x1e1170acU, 0x6c5a724eU, ++ 0xfd0efffbU, 0x0f853856U, 0x3daed51eU, 0x362d3927U, ++ 0x0a0fd964U, 0x685ca621U, 0x9b5b54d1U, 0x24362e3aU, ++ 0x0c0a67b1U, 0x9357e70fU, 0xb4ee96d2U, 0x1b9b919eU, ++ 0x80c0c54fU, 0x61dc20a2U, 0x5a774b69U, 0x1c121a16U, ++ 0xe293ba0aU, 0xc0a02ae5U, 0x3c22e043U, 0x121b171dU, ++ 0x0e090d0bU, 0xf28bc7adU, 0x2db6a8b9U, 0x141ea9c8U, ++ 0x57f11985U, 0xaf75074cU, 0xee99ddbbU, 0xa37f60fdU, ++ 0xf701269fU, 0x5c72f5bcU, 0x44663bc5U, 0x5bfb7e34U, ++ 0x8b432976U, 0xcb23c6dcU, 0xb6edfc68U, 0xb8e4f163U, ++ 0xd731dccaU, 0x42638510U, 0x13972240U, 0x84c61120U, ++ 0x854a247dU, 0xd2bb3df8U, 0xaef93211U, 0xc729a16dU, ++ 0x1d9e2f4bU, 0xdcb230f3U, 0x0d8652ecU, 0x77c1e3d0U, ++ 0x2bb3166cU, 0xa970b999U, 0x119448faU, 0x47e96422U, ++ 0xa8fc8cc4U, 0xa0f03f1aU, 0x567d2cd8U, 0x223390efU, ++ 0x87494ec7U, 0xd938d1c1U, 0x8ccaa2feU, 0x98d40b36U, ++ 0xa6f581cfU, 0xa57ade28U, 0xdab78e26U, 0x3fadbfa4U, ++ 0x2c3a9de4U, 0x5078920dU, 0x6a5fcc9bU, 0x547e4662U, ++ 0xf68d13c2U, 0x90d8b8e8U, 0x2e39f75eU, 0x82c3aff5U, ++ 0x9f5d80beU, 0x69d0937cU, 0x6fd52da9U, 0xcf2512b3U, ++ 0xc8ac993bU, 0x10187da7U, 0xe89c636eU, 0xdb3bbb7bU, ++ 0xcd267809U, 0x6e5918f4U, 0xec9ab701U, 0x834f9aa8U, ++ 0xe6956e65U, 0xaaffe67eU, 0x21bccf08U, 0xef15e8e6U, ++ 0xbae79bd9U, 0x4a6f36ceU, 0xea9f09d4U, 0x29b07cd6U, ++ 0x31a4b2afU, 0x2a3f2331U, 0xc6a59430U, 0x35a266c0U, ++ 0x744ebc37U, 0xfc82caa6U, 0xe090d0b0U, 0x33a7d815U, ++ 0xf104984aU, 0x41ecdaf7U, 0x7fcd500eU, 0x1791f62fU, ++ 0x764dd68dU, 0x43efb04dU, 0xccaa4d54U, 0xe49604dfU, ++ 0x9ed1b5e3U, 0x4c6a881bU, 0xc12c1fb8U, 0x4665517fU, ++ 0x9d5eea04U, 0x018c355dU, 0xfa877473U, 0xfb0b412eU, ++ 0xb3671d5aU, 0x92dbd252U, 0xe9105633U, 0x6dd64713U, ++ 0x9ad7618cU, 0x37a10c7aU, 0x59f8148eU, 0xeb133c89U, ++ 0xcea927eeU, 0xb761c935U, 0xe11ce5edU, 0x7a47b13cU, ++ 0x9cd2df59U, 0x55f2733fU, 0x1814ce79U, 0x73c737bfU, ++ 0x53f7cdeaU, 0x5ffdaa5bU, 0xdf3d6f14U, 0x7844db86U, ++ 0xcaaff381U, 0xb968c43eU, 0x3824342cU, 0xc2a3405fU, ++ 0x161dc372U, 0xbce2250cU, 0x283c498bU, 0xff0d9541U, ++ 0x39a80171U, 0x080cb3deU, 0xd8b4e49cU, 0x6456c190U, ++ 0x7bcb8461U, 0xd532b670U, 0x486c5c74U, 0xd0b85742U, ++}; ++const u8 Td4s[256] = { ++ 0x52U, 0x09U, 0x6aU, 0xd5U, 0x30U, 0x36U, 0xa5U, 0x38U, ++ 0xbfU, 0x40U, 0xa3U, 0x9eU, 0x81U, 0xf3U, 0xd7U, 0xfbU, ++ 0x7cU, 0xe3U, 0x39U, 0x82U, 0x9bU, 0x2fU, 0xffU, 0x87U, ++ 0x34U, 0x8eU, 0x43U, 0x44U, 0xc4U, 0xdeU, 0xe9U, 0xcbU, ++ 0x54U, 0x7bU, 0x94U, 0x32U, 0xa6U, 0xc2U, 0x23U, 0x3dU, ++ 0xeeU, 0x4cU, 0x95U, 0x0bU, 0x42U, 0xfaU, 0xc3U, 0x4eU, ++ 0x08U, 0x2eU, 0xa1U, 0x66U, 0x28U, 0xd9U, 0x24U, 0xb2U, ++ 0x76U, 0x5bU, 0xa2U, 0x49U, 0x6dU, 0x8bU, 0xd1U, 0x25U, ++ 0x72U, 0xf8U, 0xf6U, 0x64U, 0x86U, 0x68U, 0x98U, 0x16U, ++ 0xd4U, 0xa4U, 0x5cU, 0xccU, 0x5dU, 0x65U, 0xb6U, 0x92U, ++ 0x6cU, 0x70U, 0x48U, 0x50U, 0xfdU, 0xedU, 0xb9U, 0xdaU, ++ 0x5eU, 0x15U, 0x46U, 0x57U, 0xa7U, 0x8dU, 0x9dU, 0x84U, ++ 0x90U, 0xd8U, 0xabU, 0x00U, 0x8cU, 0xbcU, 0xd3U, 0x0aU, ++ 0xf7U, 0xe4U, 0x58U, 0x05U, 0xb8U, 0xb3U, 0x45U, 0x06U, ++ 0xd0U, 0x2cU, 0x1eU, 0x8fU, 0xcaU, 0x3fU, 0x0fU, 0x02U, ++ 0xc1U, 0xafU, 0xbdU, 0x03U, 0x01U, 0x13U, 0x8aU, 0x6bU, ++ 0x3aU, 0x91U, 0x11U, 0x41U, 0x4fU, 0x67U, 0xdcU, 0xeaU, ++ 0x97U, 0xf2U, 0xcfU, 0xceU, 0xf0U, 0xb4U, 0xe6U, 0x73U, ++ 0x96U, 0xacU, 0x74U, 0x22U, 0xe7U, 0xadU, 0x35U, 0x85U, ++ 0xe2U, 0xf9U, 0x37U, 0xe8U, 0x1cU, 0x75U, 0xdfU, 0x6eU, ++ 0x47U, 0xf1U, 0x1aU, 0x71U, 0x1dU, 0x29U, 0xc5U, 0x89U, ++ 0x6fU, 0xb7U, 0x62U, 0x0eU, 0xaaU, 0x18U, 0xbeU, 0x1bU, ++ 0xfcU, 0x56U, 0x3eU, 0x4bU, 0xc6U, 0xd2U, 0x79U, 0x20U, ++ 0x9aU, 0xdbU, 0xc0U, 0xfeU, 0x78U, 0xcdU, 0x5aU, 0xf4U, ++ 0x1fU, 0xddU, 0xa8U, 0x33U, 0x88U, 0x07U, 0xc7U, 0x31U, ++ 0xb1U, 0x12U, 0x10U, 0x59U, 0x27U, 0x80U, 0xecU, 0x5fU, ++ 0x60U, 0x51U, 0x7fU, 0xa9U, 0x19U, 0xb5U, 0x4aU, 0x0dU, ++ 0x2dU, 0xe5U, 0x7aU, 0x9fU, 0x93U, 0xc9U, 0x9cU, 0xefU, ++ 0xa0U, 0xe0U, 0x3bU, 0x4dU, 0xaeU, 0x2aU, 0xf5U, 0xb0U, ++ 0xc8U, 0xebU, 0xbbU, 0x3cU, 0x83U, 0x53U, 0x99U, 0x61U, ++ 0x17U, 0x2bU, 0x04U, 0x7eU, 0xbaU, 0x77U, 0xd6U, 0x26U, ++ 0xe1U, 0x69U, 0x14U, 0x63U, 0x55U, 0x21U, 0x0cU, 0x7dU, ++}; ++const u8 rcons[] = { ++ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36 ++ /* for 128-bit blocks, Rijndael never uses more than 10 rcon values */ ++}; ++ ++/** ++ * Expand the cipher key into the encryption key schedule. ++ * ++ * @return the number of rounds for the given cipher key size. ++ */ ++#ifndef PLATFORM_FREEBSD //Baron ++static void rijndaelKeySetupEnc(u32 rk[/*44*/], const u8 cipherKey[]) ++{ ++ int i; ++ u32 temp; ++ ++ rk[0] = GETU32(cipherKey ); ++ rk[1] = GETU32(cipherKey + 4); ++ rk[2] = GETU32(cipherKey + 8); ++ rk[3] = GETU32(cipherKey + 12); ++ for (i = 0; i < 10; i++) { ++ temp = rk[3]; ++ rk[4] = rk[0] ^ ++ TE421(temp) ^ TE432(temp) ^ TE443(temp) ^ TE414(temp) ^ ++ RCON(i); ++ rk[5] = rk[1] ^ rk[4]; ++ rk[6] = rk[2] ^ rk[5]; ++ rk[7] = rk[3] ^ rk[6]; ++ rk += 4; ++ } ++} ++ ++static void rijndaelEncrypt(u32 rk[/*44*/], u8 pt[16], u8 ct[16]) ++{ ++ u32 s0, s1, s2, s3, t0, t1, t2, t3; ++ int Nr = 10; ++#ifndef FULL_UNROLL ++ int r; ++#endif /* ?FULL_UNROLL */ ++ ++ /* ++ * map byte array block to cipher state ++ * and add initial round key: ++ */ ++ s0 = GETU32(pt ) ^ rk[0]; ++ s1 = GETU32(pt + 4) ^ rk[1]; ++ s2 = GETU32(pt + 8) ^ rk[2]; ++ s3 = GETU32(pt + 12) ^ rk[3]; ++ ++#define ROUND(i,d,s) \ ++d##0 = TE0(s##0) ^ TE1(s##1) ^ TE2(s##2) ^ TE3(s##3) ^ rk[4 * i]; \ ++d##1 = TE0(s##1) ^ TE1(s##2) ^ TE2(s##3) ^ TE3(s##0) ^ rk[4 * i + 1]; \ ++d##2 = TE0(s##2) ^ TE1(s##3) ^ TE2(s##0) ^ TE3(s##1) ^ rk[4 * i + 2]; \ ++d##3 = TE0(s##3) ^ TE1(s##0) ^ TE2(s##1) ^ TE3(s##2) ^ rk[4 * i + 3] ++ ++#ifdef FULL_UNROLL ++ ++ ROUND(1,t,s); ++ ROUND(2,s,t); ++ ROUND(3,t,s); ++ ROUND(4,s,t); ++ ROUND(5,t,s); ++ ROUND(6,s,t); ++ ROUND(7,t,s); ++ ROUND(8,s,t); ++ ROUND(9,t,s); ++ ++ rk += Nr << 2; ++ ++#else /* !FULL_UNROLL */ ++ ++ /* Nr - 1 full rounds: */ ++ r = Nr >> 1; ++ for (;;) { ++ ROUND(1,t,s); ++ rk += 8; ++ if (--r == 0) ++ break; ++ ROUND(0,s,t); ++ } ++ ++#endif /* ?FULL_UNROLL */ ++ ++#undef ROUND ++ ++ /* ++ * apply last round and ++ * map cipher state to byte array block: ++ */ ++ s0 = TE41(t0) ^ TE42(t1) ^ TE43(t2) ^ TE44(t3) ^ rk[0]; ++ PUTU32(ct , s0); ++ s1 = TE41(t1) ^ TE42(t2) ^ TE43(t3) ^ TE44(t0) ^ rk[1]; ++ PUTU32(ct + 4, s1); ++ s2 = TE41(t2) ^ TE42(t3) ^ TE43(t0) ^ TE44(t1) ^ rk[2]; ++ PUTU32(ct + 8, s2); ++ s3 = TE41(t3) ^ TE42(t0) ^ TE43(t1) ^ TE44(t2) ^ rk[3]; ++ PUTU32(ct + 12, s3); ++} ++ ++static void * aes_encrypt_init(u8 *key, size_t len) ++{ ++ u32 *rk; ++ if (len != 16) ++ return NULL; ++ rk = (u32*)rtw_malloc(AES_PRIV_SIZE); ++ if (rk == NULL) ++ return NULL; ++ rijndaelKeySetupEnc(rk, key); ++ return rk; ++} ++ ++static void aes_128_encrypt(void *ctx, u8 *plain, u8 *crypt) ++{ ++ rijndaelEncrypt(ctx, plain, crypt); ++} ++ ++ ++static void gf_mulx(u8 *pad) ++{ ++ int i, carry; ++ ++ carry = pad[0] & 0x80; ++ for (i = 0; i < AES_BLOCK_SIZE - 1; i++) ++ pad[i] = (pad[i] << 1) | (pad[i + 1] >> 7); ++ pad[AES_BLOCK_SIZE - 1] <<= 1; ++ if (carry) ++ pad[AES_BLOCK_SIZE - 1] ^= 0x87; ++} ++ ++static void aes_encrypt_deinit(void *ctx) ++{ ++ _rtw_memset(ctx, 0, AES_PRIV_SIZE); ++ rtw_mfree(ctx, AES_PRIV_SIZE); ++} ++ ++ ++/** ++ * omac1_aes_128_vector - One-Key CBC MAC (OMAC1) hash with AES-128 ++ * @key: 128-bit key for the hash operation ++ * @num_elem: Number of elements in the data vector ++ * @addr: Pointers to the data areas ++ * @len: Lengths of the data blocks ++ * @mac: Buffer for MAC (128 bits, i.e., 16 bytes) ++ * Returns: 0 on success, -1 on failure ++ * ++ * This is a mode for using block cipher (AES in this case) for authentication. ++ * OMAC1 was standardized with the name CMAC by NIST in a Special Publication ++ * (SP) 800-38B. ++ */ ++static int omac1_aes_128_vector(u8 *key, size_t num_elem, ++ u8 *addr[], size_t *len, u8 *mac) ++{ ++ void *ctx; ++ u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE]; ++ u8 *pos, *end; ++ size_t i, e, left, total_len; ++ ++ ctx = aes_encrypt_init(key, 16); ++ if (ctx == NULL) ++ return -1; ++ _rtw_memset(cbc, 0, AES_BLOCK_SIZE); ++ ++ total_len = 0; ++ for (e = 0; e < num_elem; e++) ++ total_len += len[e]; ++ left = total_len; ++ ++ e = 0; ++ pos = addr[0]; ++ end = pos + len[0]; ++ ++ while (left >= AES_BLOCK_SIZE) { ++ for (i = 0; i < AES_BLOCK_SIZE; i++) { ++ cbc[i] ^= *pos++; ++ if (pos >= end) { ++ e++; ++ pos = addr[e]; ++ end = pos + len[e]; ++ } ++ } ++ if (left > AES_BLOCK_SIZE) ++ aes_128_encrypt(ctx, cbc, cbc); ++ left -= AES_BLOCK_SIZE; ++ } ++ ++ _rtw_memset(pad, 0, AES_BLOCK_SIZE); ++ aes_128_encrypt(ctx, pad, pad); ++ gf_mulx(pad); ++ ++ if (left || total_len == 0) { ++ for (i = 0; i < left; i++) { ++ cbc[i] ^= *pos++; ++ if (pos >= end) { ++ e++; ++ pos = addr[e]; ++ end = pos + len[e]; ++ } ++ } ++ cbc[left] ^= 0x80; ++ gf_mulx(pad); ++ } ++ ++ for (i = 0; i < AES_BLOCK_SIZE; i++) ++ pad[i] ^= cbc[i]; ++ aes_128_encrypt(ctx, pad, mac); ++ aes_encrypt_deinit(ctx); ++ return 0; ++} ++ ++ ++/** ++ * omac1_aes_128 - One-Key CBC MAC (OMAC1) hash with AES-128 (aka AES-CMAC) ++ * @key: 128-bit key for the hash operation ++ * @data: Data buffer for which a MAC is determined ++ * @data_len: Length of data buffer in bytes ++ * @mac: Buffer for MAC (128 bits, i.e., 16 bytes) ++ * Returns: 0 on success, -1 on failure ++ * ++ * This is a mode for using block cipher (AES in this case) for authentication. ++ * OMAC1 was standardized with the name CMAC by NIST in a Special Publication ++ * (SP) 800-38B. ++ */ //modify for CONFIG_IEEE80211W ++int omac1_aes_128(u8 *key, u8 *data, size_t data_len, u8 *mac) ++{ ++ return omac1_aes_128_vector(key, 1, &data, &data_len, mac); ++} ++#endif //PLATFORM_FREEBSD Baron ++ ++#ifdef CONFIG_TDLS ++void wpa_tdls_generate_tpk(_adapter *padapter, struct sta_info *psta) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ u8 *SNonce = psta->SNonce; ++ u8 *ANonce = psta->ANonce; ++ ++ u8 key_input[SHA256_MAC_LEN]; ++ u8 *nonce[2]; ++ size_t len[2]; ++ u8 data[3 * ETH_ALEN]; ++ ++ /* IEEE Std 802.11z-2010 8.5.9.1: ++ * TPK-Key-Input = SHA-256(min(SNonce, ANonce) || max(SNonce, ANonce)) ++ */ ++ len[0] = 32; ++ len[1] = 32; ++ if (os_memcmp(SNonce, ANonce, 32) < 0) { ++ nonce[0] = SNonce; ++ nonce[1] = ANonce; ++ } else { ++ nonce[0] = ANonce; ++ nonce[1] = SNonce; ++ } ++ ++ sha256_vector(2, nonce, len, key_input); ++ ++ /* ++ * TPK-Key-Data = KDF-N_KEY(TPK-Key-Input, "TDLS PMK", ++ * min(MAC_I, MAC_R) || max(MAC_I, MAC_R) || BSSID || N_KEY) ++ * TODO: is N_KEY really included in KDF Context and if so, in which ++ * presentation format (little endian 16-bit?) is it used? It gets ++ * added by the KDF anyway.. ++ */ ++ ++ if (os_memcmp(myid(&(padapter->eeprompriv)), psta->hwaddr, ETH_ALEN) < 0) { ++ _rtw_memcpy(data, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(data + ETH_ALEN, psta->hwaddr, ETH_ALEN); ++ } else { ++ _rtw_memcpy(data, psta->hwaddr, ETH_ALEN); ++ _rtw_memcpy(data + ETH_ALEN, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ } ++ _rtw_memcpy(data + 2 * ETH_ALEN, get_bssid(pmlmepriv), ETH_ALEN); ++ ++ sha256_prf(key_input, SHA256_MAC_LEN, "TDLS PMK", data, sizeof(data), (u8 *) &psta->tpk, sizeof(psta->tpk)); ++ ++ ++} ++ ++/** ++ * wpa_tdls_ftie_mic - Calculate TDLS FTIE MIC ++ * @kck: TPK-KCK ++ * @lnkid: Pointer to the beginning of Link Identifier IE ++ * @rsnie: Pointer to the beginning of RSN IE used for handshake ++ * @timeoutie: Pointer to the beginning of Timeout IE used for handshake ++ * @ftie: Pointer to the beginning of FT IE ++ * @mic: Pointer for writing MIC ++ * ++ * Calculate MIC for TDLS frame. ++ */ ++int wpa_tdls_ftie_mic(u8 *kck, u8 trans_seq, ++ u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie, ++ u8 *mic) ++{ ++ u8 *buf, *pos; ++ struct wpa_tdls_ftie *_ftie; ++ struct wpa_tdls_lnkid *_lnkid; ++ int ret; ++ int len = 2 * ETH_ALEN + 1 + 2 + lnkid[1] + 2 + rsnie[1] + ++ 2 + timeoutie[1] + 2 + ftie[1]; ++ buf = rtw_zmalloc(len); ++ if (!buf) { ++ DBG_871X("TDLS: No memory for MIC calculation\n"); ++ return -1; ++ } ++ ++ pos = buf; ++ _lnkid = (struct wpa_tdls_lnkid *) lnkid; ++ /* 1) TDLS initiator STA MAC address */ ++ _rtw_memcpy(pos, _lnkid->init_sta, ETH_ALEN); ++ pos += ETH_ALEN; ++ /* 2) TDLS responder STA MAC address */ ++ _rtw_memcpy(pos, _lnkid->resp_sta, ETH_ALEN); ++ pos += ETH_ALEN; ++ /* 3) Transaction Sequence number */ ++ *pos++ = trans_seq; ++ /* 4) Link Identifier IE */ ++ _rtw_memcpy(pos, lnkid, 2 + lnkid[1]); ++ pos += 2 + lnkid[1]; ++ /* 5) RSN IE */ ++ _rtw_memcpy(pos, rsnie, 2 + rsnie[1]); ++ pos += 2 + rsnie[1]; ++ /* 6) Timeout Interval IE */ ++ _rtw_memcpy(pos, timeoutie, 2 + timeoutie[1]); ++ pos += 2 + timeoutie[1]; ++ /* 7) FTIE, with the MIC field of the FTIE set to 0 */ ++ _rtw_memcpy(pos, ftie, 2 + ftie[1]); ++ _ftie = (struct wpa_tdls_ftie *) pos; ++ _rtw_memset(_ftie->mic, 0, TDLS_MIC_LEN); ++ pos += 2 + ftie[1]; ++ ++ ret = omac1_aes_128(kck, buf, pos - buf, mic); ++ rtw_mfree(buf, len); ++ return ret; ++ ++} ++ ++int tdls_verify_mic(u8 *kck, u8 trans_seq, ++ u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie) ++{ ++ u8 *buf, *pos; ++ int len; ++ u8 mic[16]; ++ int ret; ++ u8 *rx_ftie, *tmp_ftie; ++ ++ if (lnkid == NULL || rsnie == NULL || ++ timeoutie == NULL || ftie == NULL){ ++ return 0; ++ } ++ ++ len = 2 * ETH_ALEN + 1 + 2 + 18 + 2 + *(rsnie+1) + 2 + *(timeoutie+1) + 2 + *(ftie+1); ++ ++ buf = rtw_zmalloc(len); ++ if (buf == NULL) ++ return 0; ++ ++ pos = buf; ++ /* 1) TDLS initiator STA MAC address */ ++ _rtw_memcpy(pos, lnkid + ETH_ALEN + 2, ETH_ALEN); ++ pos += ETH_ALEN; ++ /* 2) TDLS responder STA MAC address */ ++ _rtw_memcpy(pos, lnkid + 2 * ETH_ALEN + 2, ETH_ALEN); ++ pos += ETH_ALEN; ++ /* 3) Transaction Sequence number */ ++ *pos++ = trans_seq; ++ /* 4) Link Identifier IE */ ++ _rtw_memcpy(pos, lnkid, 2 + 18); ++ pos += 2 + 18; ++ /* 5) RSN IE */ ++ _rtw_memcpy(pos, rsnie, 2 + *(rsnie+1)); ++ pos += 2 + *(rsnie+1); ++ /* 6) Timeout Interval IE */ ++ _rtw_memcpy(pos, timeoutie, 2 + *(timeoutie+1)); ++ pos += 2 + *(timeoutie+1); ++ /* 7) FTIE, with the MIC field of the FTIE set to 0 */ ++ _rtw_memcpy(pos, ftie, 2 + *(ftie+1)); ++ pos += 2; ++ tmp_ftie = (u8 *) (pos+2); ++ _rtw_memset(tmp_ftie, 0, 16); ++ pos += *(ftie+1); ++ ++ ret = omac1_aes_128(kck, buf, pos - buf, mic); ++ rtw_mfree(buf, len); ++ if (ret) ++ return 0; ++ rx_ftie = ftie+4; ++ ++ if (os_memcmp(mic, rx_ftie, 16) == 0) { ++ //Valid MIC ++ return 1; ++ } ++ ++ //Invalid MIC ++ DBG_871X( "[%s] Invalid MIC\n", __FUNCTION__); ++ return 0; ++ ++} ++#endif //CONFIG_TDLS ++ ++#ifdef PLATFORM_WINDOWS ++void rtw_use_tkipkey_handler ( ++ IN PVOID SystemSpecific1, ++ IN PVOID FunctionContext, ++ IN PVOID SystemSpecific2, ++ IN PVOID SystemSpecific3 ++ ) ++#endif ++#ifdef PLATFORM_LINUX ++void rtw_use_tkipkey_handler(void *FunctionContext) ++#endif ++#ifdef PLATFORM_FREEBSD ++void rtw_use_tkipkey_handler(void *FunctionContext) ++#endif ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler ^^^\n")); ++ ++/* ++ if(padapter->bDriverStopped ||padapter->bSurpriseRemoved){ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler (padapter->bDriverStopped %d)(padapter->bSurpriseRemoved %d)^^^\n",padapter->bDriverStopped,padapter->bSurpriseRemoved)); ++ ++ return; ++ } ++ */ ++ ++ padapter->securitypriv.busetkipkey=_TRUE; ++ ++ RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler padapter->securitypriv.busetkipkey=%d^^^\n",padapter->securitypriv.busetkipkey)); ++ ++_func_exit_; ++ ++} ++ ++/* Restore HW wep key setting according to key_mask */ ++void rtw_sec_restore_wep_key(_adapter *adapter) ++{ ++ struct security_priv* securitypriv=&(adapter->securitypriv); ++ sint keyid; ++ ++ if((_WEP40_ == securitypriv->dot11PrivacyAlgrthm) ||(_WEP104_ == securitypriv->dot11PrivacyAlgrthm)) { ++ for(keyid=0;keyid<4;keyid++){ ++ if(securitypriv->key_mask & BIT(keyid)){ ++ if(keyid == securitypriv->dot11PrivacyKeyIndex) ++ rtw_set_key(adapter,securitypriv, keyid, 1); ++ else ++ rtw_set_key(adapter,securitypriv, keyid, 0); ++ } ++ } ++ } ++} ++ ++u8 rtw_handle_tkip_countermeasure(_adapter* adapter, const char *caller) ++{ ++ struct security_priv* securitypriv=&(adapter->securitypriv); ++ u8 status = _SUCCESS; ++ ++ if (securitypriv->btkip_countermeasure == _TRUE) { ++ u32 passing_ms = rtw_get_passing_time_ms(securitypriv->btkip_countermeasure_time); ++ if (passing_ms > 60*1000) { ++ LOG_LEVEL(_drv_info_, "%s("ADPT_FMT") countermeasure time:%ds > 60s \n", ++ caller, ADPT_ARG(adapter), passing_ms/1000); ++ securitypriv->btkip_countermeasure = _FALSE; ++ securitypriv->btkip_countermeasure_time = 0; ++ } else { ++ LOG_LEVEL(_drv_warning_, "%s("ADPT_FMT") countermeasure time:%ds < 60s \n", ++ caller, ADPT_ARG(adapter), passing_ms/1000); ++ status = _FAIL; ++ } ++ } ++ ++ return status; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sreset.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sreset.c +new file mode 100644 +index 000000000000..9d3dd7c02a79 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sreset.c +@@ -0,0 +1,351 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#include ++ ++void sreset_init_value(_adapter *padapter) ++{ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ ++ _rtw_mutex_init(&psrtpriv->silentreset_mutex); ++ psrtpriv->silent_reset_inprogress = _FALSE; ++ psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS; ++ psrtpriv->last_tx_time =0; ++ psrtpriv->last_tx_complete_time =0; ++#endif ++} ++void sreset_reset_value(_adapter *padapter) ++{ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ ++ psrtpriv->silent_reset_inprogress = _FALSE; ++ psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS; ++ psrtpriv->last_tx_time =0; ++ psrtpriv->last_tx_complete_time =0; ++#endif ++} ++ ++u8 sreset_get_wifi_status(_adapter *padapter) ++{ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ ++ u8 status = WIFI_STATUS_SUCCESS; ++ u32 val32 = 0; ++ _irqL irqL; ++ if(psrtpriv->silent_reset_inprogress == _TRUE) ++ { ++ return status; ++ } ++ val32 =rtw_read32(padapter,REG_TXDMA_STATUS); ++ if(val32==0xeaeaeaea){ ++ psrtpriv->Wifi_Error_Status = WIFI_IF_NOT_EXIST; ++ } ++ else if(val32!=0){ ++ DBG_8192C("txdmastatu(%x)\n",val32); ++ psrtpriv->Wifi_Error_Status = WIFI_MAC_TXDMA_ERROR; ++ } ++ ++ if(WIFI_STATUS_SUCCESS !=psrtpriv->Wifi_Error_Status) ++ { ++ DBG_8192C("==>%s error_status(0x%x) \n",__FUNCTION__,psrtpriv->Wifi_Error_Status); ++ status = (psrtpriv->Wifi_Error_Status &( ~(USB_READ_PORT_FAIL|USB_WRITE_PORT_FAIL))); ++ } ++ DBG_8192C("==> %s wifi_status(0x%x)\n",__FUNCTION__,status); ++ ++ //status restore ++ psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS; ++ ++ return status; ++#else ++ return WIFI_STATUS_SUCCESS; ++#endif ++} ++ ++void sreset_set_wifi_error_status(_adapter *padapter, u32 status) ++{ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.Wifi_Error_Status = status; ++#endif ++} ++ ++void sreset_set_trigger_point(_adapter *padapter, s32 tgp) ++{ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.dbg_trigger_point = tgp; ++#endif ++} ++ ++bool sreset_inprogress(_adapter *padapter) ++{ ++#if defined(DBG_CONFIG_ERROR_RESET) ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ return pHalData->srestpriv.silent_reset_inprogress; ++#else ++ return _FALSE; ++#endif ++} ++ ++void sreset_restore_security_station(_adapter *padapter) ++{ ++ u8 EntryId = 0; ++ struct mlme_priv *mlmepriv = &padapter->mlmepriv; ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ struct sta_info *psta; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ struct mlme_ext_info *pmlmeinfo = &padapter->mlmeextpriv.mlmext_info; ++ ++ { ++ u8 val8; ++ ++ if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X) { ++ val8 = 0xcc; ++ #ifdef CONFIG_WAPI_SUPPORT ++ } else if (padapter->wapiInfo.bWapiEnable && pmlmeinfo->auth_algo == dot11AuthAlgrthm_WAPI) { ++ //Disable TxUseDefaultKey, RxUseDefaultKey, RxBroadcastUseDefaultKey. ++ val8 = 0x4c; ++ #endif ++ } else { ++ val8 = 0xcf; ++ } ++ rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8)); ++ } ++ ++ #if 0 ++ if ( ( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) || ++ ( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ )) ++ { ++ ++ for(EntryId=0; EntryId<4; EntryId++) ++ { ++ if(EntryId == psecuritypriv->dot11PrivacyKeyIndex) ++ rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1); ++ else ++ rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0); ++ } ++ ++ } ++ else ++ #endif ++ if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) || ++ (padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)) ++ { ++ psta = rtw_get_stainfo(pstapriv, get_bssid(mlmepriv)); ++ if (psta == NULL) { ++ //DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n")); ++ } ++ else ++ { ++ //pairwise key ++ rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE); ++ //group key ++ rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0); ++ } ++ } ++} ++ ++void sreset_restore_network_station(_adapter *padapter) ++{ ++ struct mlme_priv *mlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ #if 0 ++ { ++ //======================================================= ++ // reset related register of Beacon control ++ ++ //set MSR to nolink ++ Set_MSR(padapter, _HW_STATE_NOLINK_); ++ // reject all data frame ++ rtw_write16(padapter, REG_RXFLTMAP2,0x00); ++ //reset TSF ++ rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1))); ++ ++ // disable update TSF ++ SetBcnCtrlReg(padapter, BIT(4), 0); ++ ++ //======================================================= ++ } ++ #endif ++ ++ rtw_setopmode_cmd(padapter, Ndis802_11Infrastructure); ++ ++ { ++ u8 threshold; ++ #ifdef CONFIG_USB_HCI ++ // TH=1 => means that invalidate usb rx aggregation ++ // TH=0 => means that validate usb rx aggregation, use init value. ++ if(mlmepriv->htpriv.ht_option) { ++ if(padapter->registrypriv.wifi_spec==1) ++ threshold = 1; ++ else ++ threshold = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold)); ++ } else { ++ threshold = 1; ++ rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold)); ++ } ++ #endif ++ } ++ ++ set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++ //disable dynamic functions, such as high power, DIG ++ //Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress); ++ ++ { ++ u8 join_type = 0; ++ rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type)); ++ } ++ ++ Set_MSR(padapter, (pmlmeinfo->state & 0x3)); ++ ++ mlmeext_joinbss_event_callback(padapter, 1); ++ //restore Sequence No. ++ rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn); ++ ++ sreset_restore_security_station(padapter); ++} ++ ++void sreset_restore_network_status(_adapter *padapter) ++{ ++ struct mlme_priv *mlmepriv = &padapter->mlmepriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if (check_fwstate(mlmepriv, WIFI_STATION_STATE)) { ++ DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_STATION_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv)); ++ sreset_restore_network_station(padapter); ++ } else if (check_fwstate(mlmepriv, WIFI_AP_STATE)) { ++ DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_AP_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv)); ++ rtw_ap_restore_network(padapter); ++ } else if (check_fwstate(mlmepriv, WIFI_ADHOC_STATE)) { ++ DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_ADHOC_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv)); ++ } else { ++ DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - ???\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv)); ++ } ++} ++ ++void sreset_stop_adapter(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ if (padapter == NULL) ++ return; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++ if (!rtw_netif_queue_stopped(padapter->pnetdev)) ++ rtw_netif_stop_queue(padapter->pnetdev); ++ ++ rtw_cancel_all_timer(padapter); ++ ++ /* TODO: OS and HCI independent */ ++ #if defined(PLATFORM_LINUX) && defined(CONFIG_USB_HCI) ++ tasklet_kill(&pxmitpriv->xmit_tasklet); ++ #endif ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) ++ rtw_scan_abort(padapter); ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) ++ _rtw_join_timeout_handler(padapter); ++ ++} ++ ++void sreset_start_adapter(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ if (padapter == NULL) ++ return; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED)) { ++ sreset_restore_network_status(padapter); ++ } ++ ++ /* TODO: OS and HCI independent */ ++ #if defined(PLATFORM_LINUX) && defined(CONFIG_USB_HCI) ++ tasklet_hi_schedule(&pxmitpriv->xmit_tasklet); ++ #endif ++ ++ _set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000); ++ ++ if (rtw_netif_queue_stopped(padapter->pnetdev)) ++ rtw_netif_wake_queue(padapter->pnetdev); ++ ++} ++ ++void sreset_reset(_adapter *padapter) ++{ ++#ifdef DBG_CONFIG_ERROR_RESET ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ _irqL irqL; ++ u32 start = rtw_get_current_time(); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS; ++ ++ _enter_pwrlock(&pwrpriv->lock); ++ ++ psrtpriv->silent_reset_inprogress = _TRUE; ++ pwrpriv->change_rfpwrstate = rf_off; ++ ++ sreset_stop_adapter(padapter); ++ #ifdef CONFIG_CONCURRENT_MODE ++ sreset_stop_adapter(padapter->pbuddy_adapter); ++ #endif ++ ++ #ifdef CONFIG_IPS ++ _ips_enter(padapter); ++ _ips_leave(padapter); ++ #endif ++ ++ sreset_start_adapter(padapter); ++ #ifdef CONFIG_CONCURRENT_MODE ++ sreset_start_adapter(padapter->pbuddy_adapter); ++ #endif ++ ++ psrtpriv->silent_reset_inprogress = _FALSE; ++ ++ _exit_pwrlock(&pwrpriv->lock); ++ ++ DBG_871X("%s done in %d ms\n", __FUNCTION__, rtw_get_passing_time_ms(start)); ++#endif ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c +new file mode 100644 +index 000000000000..4483499eb07c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c +@@ -0,0 +1,847 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_STA_MGT_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#include ++ ++void _rtw_init_stainfo(struct sta_info *psta); ++void _rtw_init_stainfo(struct sta_info *psta) ++{ ++ ++_func_enter_; ++ ++ _rtw_memset((u8 *)psta, 0, sizeof (struct sta_info)); ++ ++ _rtw_spinlock_init(&psta->lock); ++ _rtw_init_listhead(&psta->list); ++ _rtw_init_listhead(&psta->hash_list); ++ //_rtw_init_listhead(&psta->asoc_list); ++ //_rtw_init_listhead(&psta->sleep_list); ++ //_rtw_init_listhead(&psta->wakeup_list); ++ ++ _rtw_init_queue(&psta->sleep_q); ++ psta->sleepq_len = 0; ++ ++ _rtw_init_sta_xmit_priv(&psta->sta_xmitpriv); ++ _rtw_init_sta_recv_priv(&psta->sta_recvpriv); ++ ++#ifdef CONFIG_AP_MODE ++ ++ _rtw_init_listhead(&psta->asoc_list); ++ ++ _rtw_init_listhead(&psta->auth_list); ++ ++ psta->expire_to = 0; ++ ++ psta->flags = 0; ++ ++ psta->capability = 0; ++ ++ psta->bpairwise_key_installed = _FALSE; ++ ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ psta->nonerp_set = 0; ++ psta->no_short_slot_time_set = 0; ++ psta->no_short_preamble_set = 0; ++ psta->no_ht_gf_set = 0; ++ psta->no_ht_set = 0; ++ psta->ht_20mhz_set = 0; ++#endif ++ ++#ifdef CONFIG_TX_MCAST2UNI ++ psta->under_exist_checking = 0; ++#endif // CONFIG_TX_MCAST2UNI ++ ++ psta->keep_alive_trycnt = 0; ++ ++#endif // CONFIG_AP_MODE ++ ++_func_exit_; ++ ++} ++ ++u32 _rtw_init_sta_priv(struct sta_priv *pstapriv) ++{ ++ struct sta_info *psta; ++ s32 i; ++ ++_func_enter_; ++ ++ pstapriv->pallocated_stainfo_buf = rtw_zvmalloc (sizeof(struct sta_info) * NUM_STA+ 4); ++ ++ if(!pstapriv->pallocated_stainfo_buf) ++ return _FAIL; ++ ++ pstapriv->pstainfo_buf = pstapriv->pallocated_stainfo_buf + 4 - ++ ((SIZE_PTR)(pstapriv->pallocated_stainfo_buf ) & 3); ++ ++ _rtw_init_queue(&pstapriv->free_sta_queue); ++ ++ _rtw_spinlock_init(&pstapriv->sta_hash_lock); ++ ++ //_rtw_init_queue(&pstapriv->asoc_q); ++ pstapriv->asoc_sta_count = 0; ++ _rtw_init_queue(&pstapriv->sleep_q); ++ _rtw_init_queue(&pstapriv->wakeup_q); ++ ++ psta = (struct sta_info *)(pstapriv->pstainfo_buf); ++ ++ ++ for(i = 0; i < NUM_STA; i++) ++ { ++ _rtw_init_stainfo(psta); ++ ++ _rtw_init_listhead(&(pstapriv->sta_hash[i])); ++ ++ rtw_list_insert_tail(&psta->list, get_list_head(&pstapriv->free_sta_queue)); ++ ++ psta++; ++ } ++ ++ ++ ++#ifdef CONFIG_AP_MODE ++ ++ pstapriv->sta_dz_bitmap = 0; ++ pstapriv->tim_bitmap = 0; ++ ++ _rtw_init_listhead(&pstapriv->asoc_list); ++ _rtw_init_listhead(&pstapriv->auth_list); ++ _rtw_spinlock_init(&pstapriv->asoc_list_lock); ++ _rtw_spinlock_init(&pstapriv->auth_list_lock); ++ pstapriv->asoc_list_cnt = 0; ++ pstapriv->auth_list_cnt = 0; ++ ++ pstapriv->auth_to = 3; // 3*2 = 6 sec ++ pstapriv->assoc_to = 3; ++ //pstapriv->expire_to = 900;// 900*2 = 1800 sec = 30 min, expire after no any traffic. ++ //pstapriv->expire_to = 30;// 30*2 = 60 sec = 1 min, expire after no any traffic. ++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++ pstapriv->expire_to = 3; // 3*2 = 6 sec ++#else ++ pstapriv->expire_to = 60;// 60*2 = 120 sec = 2 min, expire after no any traffic. ++#endif ++ pstapriv->max_num_sta = NUM_STA; ++ ++#endif ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++inline int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta) ++{ ++ int offset = (((u8 *)sta) - stapriv->pstainfo_buf)/sizeof(struct sta_info); ++ ++ if (!stainfo_offset_valid(offset)) ++ DBG_871X("%s invalid offset(%d), out of range!!!", __func__, offset); ++ ++ return offset; ++} ++ ++inline struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int offset) ++{ ++ if (!stainfo_offset_valid(offset)) ++ DBG_871X("%s invalid offset(%d), out of range!!!", __func__, offset); ++ ++ return (struct sta_info *)(stapriv->pstainfo_buf + offset * sizeof(struct sta_info)); ++} ++ ++void _rtw_free_sta_xmit_priv_lock(struct sta_xmit_priv *psta_xmitpriv); ++void _rtw_free_sta_xmit_priv_lock(struct sta_xmit_priv *psta_xmitpriv) ++{ ++_func_enter_; ++ ++ _rtw_spinlock_free(&psta_xmitpriv->lock); ++ ++ _rtw_spinlock_free(&(psta_xmitpriv->be_q.sta_pending.lock)); ++ _rtw_spinlock_free(&(psta_xmitpriv->bk_q.sta_pending.lock)); ++ _rtw_spinlock_free(&(psta_xmitpriv->vi_q.sta_pending.lock)); ++ _rtw_spinlock_free(&(psta_xmitpriv->vo_q.sta_pending.lock)); ++_func_exit_; ++} ++ ++static void _rtw_free_sta_recv_priv_lock(struct sta_recv_priv *psta_recvpriv) ++{ ++_func_enter_; ++ ++ _rtw_spinlock_free(&psta_recvpriv->lock); ++ ++ _rtw_spinlock_free(&(psta_recvpriv->defrag_q.lock)); ++ ++_func_exit_; ++ ++} ++ ++void rtw_mfree_stainfo(struct sta_info *psta); ++void rtw_mfree_stainfo(struct sta_info *psta) ++{ ++_func_enter_; ++ ++ if(&psta->lock != NULL) ++ _rtw_spinlock_free(&psta->lock); ++ ++ _rtw_free_sta_xmit_priv_lock(&psta->sta_xmitpriv); ++ _rtw_free_sta_recv_priv_lock(&psta->sta_recvpriv); ++ ++_func_exit_; ++} ++ ++ ++// this function is used to free the memory of lock || sema for all stainfos ++void rtw_mfree_all_stainfo(struct sta_priv *pstapriv ); ++void rtw_mfree_all_stainfo(struct sta_priv *pstapriv ) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ struct sta_info *psta = NULL; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ phead = get_list_head(&pstapriv->free_sta_queue); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info ,list); ++ plist = get_next(plist); ++ ++ rtw_mfree_stainfo(psta); ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++_func_exit_; ++ ++} ++ ++void rtw_mfree_sta_priv_lock(struct sta_priv *pstapriv); ++void rtw_mfree_sta_priv_lock(struct sta_priv *pstapriv) ++{ ++#ifdef CONFIG_AP_MODE ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++#endif ++ ++ rtw_mfree_all_stainfo(pstapriv); //be done before free sta_hash_lock ++ ++ _rtw_spinlock_free(&pstapriv->free_sta_queue.lock); ++ ++ _rtw_spinlock_free(&pstapriv->sta_hash_lock); ++ _rtw_spinlock_free(&pstapriv->wakeup_q.lock); ++ _rtw_spinlock_free(&pstapriv->sleep_q.lock); ++ ++#ifdef CONFIG_AP_MODE ++ _rtw_spinlock_free(&pstapriv->asoc_list_lock); ++ _rtw_spinlock_free(&pstapriv->auth_list_lock); ++ _rtw_spinlock_free(&pacl_list->acl_node_q.lock); ++#endif ++ ++} ++ ++u32 _rtw_free_sta_priv(struct sta_priv *pstapriv) ++{ ++ _irqL irqL; ++ _list *phead, *plist; ++ struct sta_info *psta = NULL; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ int index; ++ ++_func_enter_; ++ if(pstapriv){ ++ ++ /* delete all reordering_ctrl_timer */ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ for(index = 0; index < NUM_STA; index++) ++ { ++ phead = &(pstapriv->sta_hash[index]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ int i; ++ psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list); ++ plist = get_next(plist); ++ ++ for(i=0; i < 16 ; i++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ _cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer); ++ } ++ } ++ } ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ /*===============================*/ ++ ++ rtw_mfree_sta_priv_lock(pstapriv); ++ ++ if(pstapriv->pallocated_stainfo_buf) { ++ rtw_vmfree(pstapriv->pallocated_stainfo_buf, sizeof(struct sta_info)*NUM_STA+4); ++ } ++ } ++ ++_func_exit_; ++ return _SUCCESS; ++} ++ ++ ++//struct sta_info *rtw_alloc_stainfo(_queue *pfree_sta_queue, unsigned char *hwaddr) ++struct sta_info *rtw_alloc_stainfo(struct sta_priv *pstapriv, u8 *hwaddr) ++{ ++ _irqL irqL, irqL2; ++ uint tmp_aid; ++ s32 index; ++ _list *phash_list; ++ struct sta_info *psta; ++ _queue *pfree_sta_queue; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ int i = 0; ++ u16 wRxSeqInitialValue = 0xffff; ++ ++_func_enter_; ++ ++ pfree_sta_queue = &pstapriv->free_sta_queue; ++ ++ //_enter_critical_bh(&(pfree_sta_queue->lock), &irqL); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ ++ if (_rtw_queue_empty(pfree_sta_queue) == _TRUE) ++ { ++ //_exit_critical_bh(&(pfree_sta_queue->lock), &irqL); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ psta = NULL; ++ } ++ else ++ { ++ psta = LIST_CONTAINOR(get_next(&pfree_sta_queue->queue), struct sta_info, list); ++ ++ rtw_list_delete(&(psta->list)); ++ ++ //_exit_critical_bh(&(pfree_sta_queue->lock), &irqL); ++ ++ tmp_aid = psta->aid; ++ ++ _rtw_init_stainfo(psta); ++ ++ _rtw_memcpy(psta->hwaddr, hwaddr, ETH_ALEN); ++ ++ index = wifi_mac_hash(hwaddr); ++ ++ RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_info_,("rtw_alloc_stainfo: index = %x", index)); ++ ++ if(index >= NUM_STA){ ++ RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("ERROR=> rtw_alloc_stainfo: index >= NUM_STA")); ++ psta= NULL; ++ goto exit; ++ } ++ phash_list = &(pstapriv->sta_hash[index]); ++ ++ //_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ ++ rtw_list_insert_tail(&psta->hash_list, phash_list); ++ ++ pstapriv->asoc_sta_count ++ ; ++ ++ //_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ ++// Commented by Albert 2009/08/13 ++// For the SMC router, the sequence number of first packet of WPS handshake will be 0. ++// In this case, this packet will be dropped by recv_decache function if we use the 0x00 as the default value for tid_rxseq variable. ++// So, we initialize the tid_rxseq variable as the 0xffff. ++ ++ for( i = 0; i < 16; i++ ) ++ { ++ _rtw_memcpy( &psta->sta_recvpriv.rxcache.tid_rxseq[ i ], &wRxSeqInitialValue, 2 ); ++ } ++ ++ RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_info_,("alloc number_%d stainfo with hwaddr = %x %x %x %x %x %x \n", ++ pstapriv->asoc_sta_count , hwaddr[0], hwaddr[1], hwaddr[2],hwaddr[3],hwaddr[4],hwaddr[5])); ++ ++ init_addba_retry_timer(pstapriv->padapter, psta); ++ ++#ifdef CONFIG_TDLS ++ psta->padapter = pstapriv->padapter; ++ init_TPK_timer(pstapriv->padapter, psta); ++ init_ch_switch_timer(pstapriv->padapter, psta); ++ init_base_ch_timer(pstapriv->padapter, psta); ++ init_off_ch_timer(pstapriv->padapter, psta); ++ init_handshake_timer(pstapriv->padapter, psta); ++ init_tdls_alive_timer(pstapriv->padapter, psta); ++#endif //CONFIG_TDLS ++ ++ //for A-MPDU Rx reordering buffer control ++ for(i=0; i < 16 ; i++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ ++ preorder_ctrl->padapter = pstapriv->padapter; ++ ++ preorder_ctrl->enable = _FALSE; ++ ++ preorder_ctrl->indicate_seq = 0xffff; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq); ++ #endif ++ preorder_ctrl->wend_b= 0xffff; ++ //preorder_ctrl->wsize_b = (NR_RECVBUFF-2); ++ preorder_ctrl->wsize_b = 64;//64; ++ ++ _rtw_init_queue(&preorder_ctrl->pending_recvframe_queue); ++ ++ rtw_init_recv_timer(preorder_ctrl); ++ } ++ ++ ++ //init for DM ++ psta->rssi_stat.UndecoratedSmoothedPWDB = 0; ++ psta->rssi_stat.UndecoratedSmoothedCCK = (-1); ++ ++ /* init for the sequence number of received management frame */ ++ psta->RxMgmtFrameSeqNum = 0xffff; ++ } ++ ++exit: ++ ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2); ++ ++_func_exit_; ++ ++ return psta; ++ ++ ++} ++ ++ ++// using pstapriv->sta_hash_lock to protect ++u32 rtw_free_stainfo(_adapter *padapter , struct sta_info *psta) ++{ ++ int i; ++ _irqL irqL0; ++ _queue *pfree_sta_queue; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ struct sta_xmit_priv *pstaxmitpriv; ++ struct xmit_priv *pxmitpriv= &padapter->xmitpriv; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct hw_xmit *phwxmit; ++ ++ ++_func_enter_; ++ ++ if (psta == NULL) ++ goto exit; ++ ++ ++ _enter_critical_bh(&psta->lock, &irqL0); ++ psta->state &= ~_FW_LINKED; ++ _exit_critical_bh(&psta->lock, &irqL0); ++ ++ pfree_sta_queue = &pstapriv->free_sta_queue; ++ ++ ++ pstaxmitpriv = &psta->sta_xmitpriv; ++ ++ //rtw_list_delete(&psta->sleep_list); ++ ++ //rtw_list_delete(&psta->wakeup_list); ++ ++ _enter_critical_bh(&pxmitpriv->lock, &irqL0); ++ ++ rtw_free_xmitframe_queue(pxmitpriv, &psta->sleep_q); ++ psta->sleepq_len = 0; ++ ++ //vo ++ //_enter_critical_bh(&(pxmitpriv->vo_pending.lock), &irqL0); ++ rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->vo_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->vo_q.tx_pending)); ++ phwxmit = pxmitpriv->hwxmits; ++ phwxmit->accnt -= pstaxmitpriv->vo_q.qcnt; ++ pstaxmitpriv->vo_q.qcnt = 0; ++ //_exit_critical_bh(&(pxmitpriv->vo_pending.lock), &irqL0); ++ ++ //vi ++ //_enter_critical_bh(&(pxmitpriv->vi_pending.lock), &irqL0); ++ rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->vi_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->vi_q.tx_pending)); ++ phwxmit = pxmitpriv->hwxmits+1; ++ phwxmit->accnt -= pstaxmitpriv->vi_q.qcnt; ++ pstaxmitpriv->vi_q.qcnt = 0; ++ //_exit_critical_bh(&(pxmitpriv->vi_pending.lock), &irqL0); ++ ++ //be ++ //_enter_critical_bh(&(pxmitpriv->be_pending.lock), &irqL0); ++ rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->be_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending)); ++ phwxmit = pxmitpriv->hwxmits+2; ++ phwxmit->accnt -= pstaxmitpriv->be_q.qcnt; ++ pstaxmitpriv->be_q.qcnt = 0; ++ //_exit_critical_bh(&(pxmitpriv->be_pending.lock), &irqL0); ++ ++ //bk ++ //_enter_critical_bh(&(pxmitpriv->bk_pending.lock), &irqL0); ++ rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->bk_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->bk_q.tx_pending)); ++ phwxmit = pxmitpriv->hwxmits+3; ++ phwxmit->accnt -= pstaxmitpriv->bk_q.qcnt; ++ pstaxmitpriv->bk_q.qcnt = 0; ++ //_exit_critical_bh(&(pxmitpriv->bk_pending.lock), &irqL0); ++ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL0); ++ ++ rtw_list_delete(&psta->hash_list); ++ RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("\n free number_%d stainfo with hwaddr = 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x \n",pstapriv->asoc_sta_count , psta->hwaddr[0], psta->hwaddr[1], psta->hwaddr[2],psta->hwaddr[3],psta->hwaddr[4],psta->hwaddr[5])); ++ pstapriv->asoc_sta_count --; ++ ++ ++ // re-init sta_info; 20061114 // will be init in alloc_stainfo ++ //_rtw_init_sta_xmit_priv(&psta->sta_xmitpriv); ++ //_rtw_init_sta_recv_priv(&psta->sta_recvpriv); ++ ++ _cancel_timer_ex(&psta->addba_retry_timer); ++ ++#ifdef CONFIG_TDLS ++ _cancel_timer_ex(&psta->TPK_timer); ++ _cancel_timer_ex(&psta->option_timer); ++ _cancel_timer_ex(&psta->base_ch_timer); ++ _cancel_timer_ex(&psta->off_ch_timer); ++ _cancel_timer_ex(&psta->alive_timer1); ++ _cancel_timer_ex(&psta->alive_timer2); ++#endif //CONFIG_TDLS ++ ++ //for A-MPDU Rx reordering buffer control, cancel reordering_ctrl_timer ++ for(i=0; i < 16 ; i++) ++ { ++ _irqL irqL; ++ _list *phead, *plist; ++ union recv_frame *prframe; ++ _queue *ppending_recvframe_queue; ++ _queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue; ++ ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ ++ _cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer); ++ ++ ++ ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue; ++ ++ _enter_critical_bh(&ppending_recvframe_queue->lock, &irqL); ++ ++ phead = get_list_head(ppending_recvframe_queue); ++ plist = get_next(phead); ++ ++ while(!rtw_is_list_empty(phead)) ++ { ++ prframe = LIST_CONTAINOR(plist, union recv_frame, u); ++ ++ plist = get_next(plist); ++ ++ rtw_list_delete(&(prframe->u.hdr.list)); ++ ++ rtw_free_recvframe(prframe, pfree_recv_queue); ++ } ++ ++ _exit_critical_bh(&ppending_recvframe_queue->lock, &irqL); ++ ++ } ++ ++ ++#ifdef CONFIG_AP_MODE ++ ++/* ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL0); ++ rtw_list_delete(&psta->asoc_list); ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL0); ++*/ ++ _enter_critical_bh(&pstapriv->auth_list_lock, &irqL0); ++ if (!rtw_is_list_empty(&psta->auth_list)) { ++ rtw_list_delete(&psta->auth_list); ++ pstapriv->auth_list_cnt--; ++ } ++ _exit_critical_bh(&pstapriv->auth_list_lock, &irqL0); ++ ++ psta->expire_to = 0; ++ ++ psta->sleepq_ac_len = 0; ++ psta->qos_info = 0; ++ ++ psta->max_sp_len = 0; ++ psta->uapsd_bk = 0; ++ psta->uapsd_be = 0; ++ psta->uapsd_vi = 0; ++ psta->uapsd_vo = 0; ++ ++ psta->has_legacy_ac = 0; ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ ++ pstapriv->sta_dz_bitmap &=~BIT(psta->aid); ++ pstapriv->tim_bitmap &=~BIT(psta->aid); ++ ++ //rtw_indicate_sta_disassoc_event(padapter, psta); ++ ++ if ((psta->aid >0)&&(pstapriv->sta_aid[psta->aid - 1] == psta)) ++ { ++ pstapriv->sta_aid[psta->aid - 1] = NULL; ++ psta->aid = 0; ++ } ++ ++#endif // CONFIG_NATIVEAP_MLME ++ ++#ifdef CONFIG_TX_MCAST2UNI ++ psta->under_exist_checking = 0; ++#endif // CONFIG_TX_MCAST2UNI ++ ++#endif // CONFIG_AP_MODE ++ ++ _rtw_spinlock_free(&psta->lock); ++ ++ //_enter_critical_bh(&(pfree_sta_queue->lock), &irqL0); ++ rtw_list_insert_tail(&psta->list, get_list_head(pfree_sta_queue)); ++ //_exit_critical_bh(&(pfree_sta_queue->lock), &irqL0); ++ ++exit: ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++// free all stainfo which in sta_hash[all] ++void rtw_free_all_stainfo(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ s32 index; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info* pbcmc_stainfo =rtw_get_bcmc_stainfo( padapter); ++ ++_func_enter_; ++ ++ if(pstapriv->asoc_sta_count==1) ++ goto exit; ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(index=0; index< NUM_STA; index++) ++ { ++ phead = &(pstapriv->sta_hash[index]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list); ++ ++ plist = get_next(plist); ++ ++ if(pbcmc_stainfo!=psta) ++ rtw_free_stainfo(padapter , psta); ++ ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++/* any station allocated can be searched by hash list */ ++struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr) ++{ ++ ++ _irqL irqL; ++ ++ _list *plist, *phead; ++ ++ struct sta_info *psta = NULL; ++ ++ u32 index; ++ ++ u8 *addr; ++ ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++ ++_func_enter_; ++ ++ if(hwaddr==NULL) ++ return NULL; ++ ++ if(IS_MCAST(hwaddr)) ++ { ++ addr = bc_addr; ++ } ++ else ++ { ++ addr = hwaddr; ++ } ++ ++ index = wifi_mac_hash(addr); ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ phead = &(pstapriv->sta_hash[index]); ++ plist = get_next(phead); ++ ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ ++ psta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ if ((_rtw_memcmp(psta->hwaddr, addr, ETH_ALEN))== _TRUE) ++ { // if found the matched address ++ break; ++ } ++ psta=NULL; ++ plist = get_next(plist); ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++_func_exit_; ++ return psta; ++ ++} ++ ++u32 rtw_init_bcmc_stainfo(_adapter* padapter) ++{ ++ ++ struct sta_info *psta; ++ struct tx_servq *ptxservq; ++ u32 res=_SUCCESS; ++ NDIS_802_11_MAC_ADDRESS bcast_addr= {0xff,0xff,0xff,0xff,0xff,0xff}; ++ ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ //_queue *pstapending = &padapter->xmitpriv.bm_pending; ++ ++_func_enter_; ++ ++ psta = rtw_alloc_stainfo(pstapriv, bcast_addr); ++ ++ if(psta==NULL){ ++ res=_FAIL; ++ RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("rtw_alloc_stainfo fail")); ++ goto exit; ++ } ++ ++ // default broadcast & multicast use macid 1 ++ psta->mac_id = 1; ++ ++ ptxservq= &(psta->sta_xmitpriv.be_q); ++ ++/* ++ _enter_critical(&pstapending->lock, &irqL0); ++ ++ if (rtw_is_list_empty(&ptxservq->tx_pending)) ++ rtw_list_insert_tail(&ptxservq->tx_pending, get_list_head(pstapending)); ++ ++ _exit_critical(&pstapending->lock, &irqL0); ++*/ ++ ++exit: ++_func_exit_; ++ return _SUCCESS; ++ ++} ++ ++ ++struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter) ++{ ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; ++_func_enter_; ++ psta = rtw_get_stainfo(pstapriv, bc_addr); ++_func_exit_; ++ return psta; ++ ++} ++ ++u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr) ++{ ++ u8 res = _TRUE; ++#ifdef CONFIG_AP_MODE ++ _irqL irqL; ++ _list *plist, *phead; ++ struct rtw_wlan_acl_node *paclnode; ++ u8 match = _FALSE; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct wlan_acl_pool *pacl_list = &pstapriv->acl_list; ++ _queue *pacl_node_q =&pacl_list->acl_node_q; ++ ++ _enter_critical_bh(&(pacl_node_q->lock), &irqL); ++ phead = get_list_head(pacl_node_q); ++ plist = get_next(phead); ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list); ++ plist = get_next(plist); ++ ++ if(_rtw_memcmp(paclnode->addr, mac_addr, ETH_ALEN)) ++ { ++ if(paclnode->valid == _TRUE) ++ { ++ match = _TRUE; ++ break; ++ } ++ } ++ } ++ _exit_critical_bh(&(pacl_node_q->lock), &irqL); ++ ++ ++ if(pacl_list->mode == 1)//accept unless in deny list ++ { ++ res = (match == _TRUE) ? _FALSE:_TRUE; ++ } ++ else if(pacl_list->mode == 2)//deny unless in accept list ++ { ++ res = (match == _TRUE) ? _TRUE:_FALSE; ++ } ++ else ++ { ++ res = _TRUE; ++ } ++ ++#endif ++ ++ return res; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_tdls.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_tdls.c +new file mode 100644 +index 000000000000..c99fc01d2f5b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_tdls.c +@@ -0,0 +1,2940 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_TDLS_C_ ++ ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_TDLS ++extern unsigned char MCS_rate_2R[16]; ++extern unsigned char MCS_rate_1R[16]; ++extern void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame); ++extern s32 rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++void rtw_reset_tdls_info(_adapter* padapter) ++{ ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ ++ ptdlsinfo->ap_prohibited = _FALSE; ++ ptdlsinfo->setup_state = TDLS_STATE_NONE; ++ ptdlsinfo->sta_cnt = 0; ++ ptdlsinfo->sta_maximum = _FALSE; ++ ptdlsinfo->macid_index= 6; ++ ptdlsinfo->clear_cam= 0; ++ ptdlsinfo->ch_sensing = 0; ++ ptdlsinfo->cur_channel = 0; ++ ptdlsinfo->candidate_ch = 1; //when inplement channel switching, default candidate channel is 1 ++ ptdlsinfo->watchdog_count = 0; ++ ptdlsinfo->dev_discovered = 0; ++ ++#ifdef CONFIG_WFD ++ ptdlsinfo->wfd_info = &padapter->wfd_info; ++#endif //CONFIG_WFD ++} ++ ++int rtw_init_tdls_info(_adapter* padapter) ++{ ++ int res = _SUCCESS; ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ ++ ptdlsinfo->enable = 1; ++ rtw_reset_tdls_info(padapter); ++ ++ _rtw_spinlock_init(&ptdlsinfo->cmd_lock); ++ _rtw_spinlock_init(&ptdlsinfo->hdl_lock); ++ ++ return res; ++ ++} ++ ++void rtw_free_tdls_info(struct tdls_info *ptdlsinfo) ++{ ++ _rtw_spinlock_free(&ptdlsinfo->cmd_lock); ++ _rtw_spinlock_free(&ptdlsinfo->hdl_lock); ++ ++ _rtw_memset(ptdlsinfo, 0, sizeof(struct tdls_info) ); ++ ++} ++ ++void issue_nulldata_to_TDLS_peer_STA(_adapter *padapter, struct sta_info *ptdls_sta, unsigned int power_mode) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++// SetToDs(fctrl); ++ if (power_mode) ++ { ++ SetPwrMgt(fctrl); ++ } ++ ++ _rtw_memcpy(pwlanhdr->addr1, ptdls_sta->hwaddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]++; ++ ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF; ++ pattrib->seqnum = ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]; ++ SetSeqNum(pwlanhdr, pattrib->seqnum); ++ ++ SetFrameSubType(pframe, WIFI_DATA_NULL); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++} ++ ++s32 update_tdls_attrib(_adapter *padapter, struct pkt_attrib *pattrib) ++{ ++ ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv= &pmlmepriv->qospriv; ++ ++ s32 res=_SUCCESS; ++ sint bmcast; ++ ++ bmcast = IS_MCAST(pattrib->ra); ++ ++ psta = rtw_get_stainfo(pstapriv, pattrib->ra); ++ if (psta == NULL) { ++ res =_FAIL; ++ goto exit; ++ } ++ ++ pattrib->mac_id = psta->mac_id; ++ ++ pattrib->psta = psta; ++ ++ pattrib->ack_policy = 0; ++ // get ether_hdr_len ++ pattrib->pkt_hdrlen = ETH_HLEN;//(pattrib->ether_type == 0x8100) ? (14 + 4 ): 14; //vlan tag ++ ++ if (pqospriv->qos_option && psta->qos_option) { ++ pattrib->priority = 1; //tdls management frame should be AC_BK ++ pattrib->hdrlen = WLAN_HDR_A3_QOS_LEN; ++ pattrib->subtype = WIFI_QOS_DATA_TYPE; ++ } else { ++ pattrib->hdrlen = WLAN_HDR_A3_LEN; ++ pattrib->subtype = WIFI_DATA_TYPE; ++ pattrib->priority = 0; ++ } ++ ++ if (psta->ieee8021x_blocked == _TRUE) ++ { ++ pattrib->encrypt = 0; ++ } ++ else ++ { ++ GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, bmcast); ++ ++ switch(psecuritypriv->dot11AuthAlgrthm) ++ { ++ case dot11AuthAlgrthm_Open: ++ case dot11AuthAlgrthm_Shared: ++ case dot11AuthAlgrthm_Auto: ++ pattrib->key_idx = (u8)psecuritypriv->dot11PrivacyKeyIndex; ++ break; ++ case dot11AuthAlgrthm_8021X: ++ pattrib->key_idx = 0; ++ break; ++ default: ++ pattrib->key_idx = 0; ++ break; ++ } ++ } ++ ++ switch (pattrib->encrypt) ++ { ++ case _WEP40_: ++ case _WEP104_: ++ pattrib->iv_len = 4; ++ pattrib->icv_len = 4; ++ break; ++ case _TKIP_: ++ pattrib->iv_len = 8; ++ pattrib->icv_len = 4; ++ if(padapter->securitypriv.busetkipkey==_FAIL) ++ { ++ res =_FAIL; ++ goto exit; ++ } ++ break; ++ case _AES_: ++ pattrib->iv_len = 8; ++ pattrib->icv_len = 8; ++ break; ++ default: ++ pattrib->iv_len = 0; ++ pattrib->icv_len = 0; ++ break; ++ } ++ ++ if (pattrib->encrypt && ++ ((padapter->securitypriv.sw_encrypt == _TRUE) || (psecuritypriv->hw_decrypted == _FALSE))) ++ { ++ pattrib->bswenc = _TRUE; ++ } else { ++ pattrib->bswenc = _FALSE; ++ } ++ ++ //qos_en, ht_en, init rate, ,bw, ch_offset, sgi ++ pattrib->qos_en = psta->qos_option; ++ pattrib->ht_en = psta->htpriv.ht_option; ++ pattrib->raid = psta->raid; ++ pattrib->bwmode = psta->htpriv.bwmode; ++ pattrib->ch_offset = psta->htpriv.ch_offset; ++ pattrib->sgi= psta->htpriv.sgi; ++ pattrib->ampdu_en = _FALSE; ++ ++ //if(pattrib->ht_en && psta->htpriv.ampdu_enable) ++ //{ ++ // if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority)) ++ // pattrib->ampdu_en = _TRUE; ++ //} ++ ++exit: ++ ++ return res; ++} ++ ++void free_tdls_sta(_adapter *padapter, struct sta_info *ptdls_sta) ++{ ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ _irqL irqL; ++ ++ //free peer sta_info ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if(ptdlsinfo->sta_cnt != 0) ++ ptdlsinfo->sta_cnt--; ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if( ptdlsinfo->sta_cnt < (NUM_STA - 2) ) // -2: AP + BC/MC sta ++ { ++ ptdlsinfo->sta_maximum = _FALSE; ++ _rtw_memset( &ptdlsinfo->ss_record, 0x00, sizeof(struct tdls_ss_record) ); ++ } ++ //ready to clear cam ++ if(ptdls_sta->mac_id!=0){ ++ ptdlsinfo->clear_cam=ptdls_sta->mac_id; ++ rtw_setstakey_cmd(padapter, (u8 *)ptdls_sta, _TRUE); ++ } ++ ++ if(ptdlsinfo->sta_cnt==0){ ++ rtw_tdls_cmd(padapter, myid(&(padapter->eeprompriv)), TDLS_RS_RCR); ++ ptdlsinfo->setup_state=TDLS_STATE_NONE; ++ } ++ else ++ DBG_871X("Remain tdls sta:%02x\n", ptdlsinfo->sta_cnt); ++ ++ rtw_free_stainfo(padapter, ptdls_sta); ++ ++} ++ ++// cam entry will be the same as mac_id ++void rtw_tdls_set_mac_id(struct tdls_info *ptdlsinfo, struct sta_info *ptdls_sta) ++{ ++ if(ptdls_sta->mac_id==0) ++ { ++ ptdls_sta->mac_id = ptdlsinfo->macid_index; ++ if( (++ptdlsinfo->macid_index) > (NUM_STA -2) ) ++ ptdlsinfo->macid_index= TDLS_INI_MACID_ENTRY; ++ } ++} ++ ++//TDLS encryption(if needed) will always be CCMP ++void rtw_tdls_set_key(_adapter *adapter, struct rx_pkt_attrib *prx_pkt_attrib, struct sta_info *ptdls_sta) ++{ ++ if(prx_pkt_attrib->encrypt) ++ { ++ ptdls_sta->dot118021XPrivacy=_AES_; ++ rtw_setstakey_cmd(adapter, (u8*)ptdls_sta, _TRUE); ++ } ++} ++ ++void rtw_tdls_process_ht_cap(_adapter *adapter, struct sta_info *ptdls_sta, u8 *data, u8 Length) ++{ ++ /* save HT capabilities in the sta object */ ++ _rtw_memset(&ptdls_sta->htpriv.ht_cap, 0, sizeof(struct rtw_ieee80211_ht_cap)); ++ if (data && Length >= sizeof(struct rtw_ieee80211_ht_cap) ) ++ { ++ ptdls_sta->flags |= WLAN_STA_HT; ++ ++ ptdls_sta->flags |= WLAN_STA_WME; ++ ++ _rtw_memcpy(&ptdls_sta->htpriv.ht_cap, data, sizeof(struct rtw_ieee80211_ht_cap)); ++ ++ } else ++ ptdls_sta->flags &= ~WLAN_STA_HT; ++ ++ if(ptdls_sta->flags & WLAN_STA_HT) ++ { ++ if(adapter->registrypriv.ht_enable == _TRUE) ++ { ++ ptdls_sta->htpriv.ht_option = _TRUE; ++ } ++ else ++ { ++ ptdls_sta->htpriv.ht_option = _FALSE; ++ ptdls_sta->stat_code = _STATS_FAILURE_; ++ } ++ } ++ ++ //HT related cap ++ if(ptdls_sta->htpriv.ht_option) ++ { ++ //check if sta supports rx ampdu ++ if(adapter->registrypriv.ampdu_enable==1) ++ ptdls_sta->htpriv.ampdu_enable = _TRUE; ++ ++ //check if sta support s Short GI ++ if(ptdls_sta->htpriv.ht_cap.cap_info & cpu_to_le16(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ++ { ++ ptdls_sta->htpriv.sgi = _TRUE; ++ } ++ ++ // bwmode would still followed AP's setting ++ if(ptdls_sta->htpriv.ht_cap.cap_info & cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH)) ++ { ++ ptdls_sta->htpriv.bwmode = adapter->mlmeextpriv.cur_bwmode; ++ ptdls_sta->htpriv.ch_offset = adapter->mlmeextpriv.cur_ch_offset; ++ } ++ } ++} ++ ++u8 *rtw_tdls_set_ht_cap(_adapter *padapter, u8 *pframe, struct pkt_attrib *pattrib) ++{ ++ struct rtw_ieee80211_ht_cap ht_capie; ++ u8 rf_type; ++ ++ //HT capabilities ++ _rtw_memset(&ht_capie, 0, sizeof(struct rtw_ieee80211_ht_cap)); ++ ++ ht_capie.cap_info = IEEE80211_HT_CAP_SUP_WIDTH |IEEE80211_HT_CAP_SGI_20 |IEEE80211_HT_CAP_SM_PS | ++ IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_TX_STBC |IEEE80211_HT_CAP_DSSSCCK40; ++ ++ { ++ u32 rx_packet_offset, max_recvbuf_sz; ++ rtw_hal_get_def_var(padapter, HAL_DEF_RX_PACKET_OFFSET, &rx_packet_offset); ++ rtw_hal_get_def_var(padapter, HAL_DEF_MAX_RECVBUF_SZ, &max_recvbuf_sz); ++ if(max_recvbuf_sz-rx_packet_offset>(8191-256)) ++ ht_capie.cap_info = ht_capie.cap_info |IEEE80211_HT_CAP_MAX_AMSDU; ++ } ++ ++ ht_capie.ampdu_params_info = (IEEE80211_HT_CAP_AMPDU_FACTOR&0x03); ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ switch(rf_type) ++ { ++ case RF_1T1R: ++ ht_capie.cap_info |= 0x0100;//RX STBC One spatial stream ++ _rtw_memcpy(ht_capie.supp_mcs_set, MCS_rate_1R, 16); ++ break; ++ ++ case RF_2T2R: ++ case RF_1T2R: ++ default: ++ ht_capie.cap_info|= 0x0200;//RX STBC two spatial stream ++ _rtw_memcpy(ht_capie.supp_mcs_set, MCS_rate_2R, 16); ++ break; ++ } ++ ++ return(rtw_set_ie(pframe, _HT_CAPABILITY_IE_, ++ sizeof(struct rtw_ieee80211_ht_cap), (unsigned char*)&ht_capie, &(pattrib->pktlen))); ++} ++ ++u8 *rtw_tdls_set_sup_ch(struct mlme_ext_priv *pmlmeext, u8 *pframe, struct pkt_attrib *pattrib) ++{ ++ u8 sup_ch[ 30 * 2 ] = { 0x00 }, sup_ch_idx = 0, idx_5g = 2; //For supported channel ++ do{ ++ if( pmlmeext->channel_set[sup_ch_idx].ChannelNum <= 14 ) ++ { ++ sup_ch[0] = 1; //First channel number ++ sup_ch[1] = pmlmeext->channel_set[sup_ch_idx].ChannelNum; //Number of channel ++ } ++ else ++ { ++ sup_ch[idx_5g++] = pmlmeext->channel_set[sup_ch_idx].ChannelNum; ++ sup_ch[idx_5g++] = 1; ++ } ++ ++ sup_ch_idx++; ++ } ++ while( pmlmeext->channel_set[sup_ch_idx].ChannelNum != 0 ); ++ return(rtw_set_ie(pframe, _SUPPORTED_CH_IE_, idx_5g, sup_ch, &(pattrib->pktlen))); ++} ++ ++#ifdef CONFIG_WFD ++void rtw_tdls_process_wfd_ie(struct tdls_info *ptdlsinfo, u8 *ptr, u8 length) ++{ ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ u32 wfd_ielen = 0; ++ u32 wfd_offset = 0; ++ // Try to get the TCP port information when receiving the negotiation response. ++ // ++ ++ wfd_offset = 0; ++ wfd_offset = rtw_get_wfd_ie( ptr + wfd_offset, length - wfd_offset, wfd_ie, &wfd_ielen ); ++ while( wfd_offset ) ++ { ++ u8 attr_content[ 10 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ int i; ++ ++ DBG_871X( "[%s] WFD IE Found!!\n", __FUNCTION__ ); ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ ptdlsinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 ); ++ DBG_871X( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, ptdlsinfo->wfd_info->peer_rtsp_ctrlport ); ++ } ++ ++ _rtw_memset( attr_content, 0x00, 10); ++ attr_contentlen = 0; ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_LOCAL_IP_ADDR, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ _rtw_memcpy(ptdlsinfo->wfd_info->peer_ip_address, ( attr_content + 1 ), 4); ++ DBG_871X( "[%s] Peer IP = %02u.%02u.%02u.%02u \n", __FUNCTION__, ++ ptdlsinfo->wfd_info->peer_ip_address[0], ptdlsinfo->wfd_info->peer_ip_address[1], ++ ptdlsinfo->wfd_info->peer_ip_address[2], ptdlsinfo->wfd_info->peer_ip_address[3] ++ ); ++ } ++ wfd_offset = rtw_get_wfd_ie( ptr + wfd_offset, length - wfd_offset, wfd_ie, &wfd_ielen ); ++ } ++} ++ ++void issue_tunneled_probe_req(_adapter *padapter) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ u8 baddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ DBG_871X("[%s]\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, baddr, ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TUNNELED_PROBE_REQ) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++ ++void issue_tunneled_probe_rsp(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct rx_pkt_attrib *rx_pkt_pattrib = &precv_frame->u.hdr.attrib; ++ ++ DBG_871X("[%s]\n", __FUNCTION__); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TUNNELED_PROBE_RSP) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++#endif //CONFIG_WFD ++ ++void issue_tdls_setup_req(_adapter *padapter, u8 *mac_addr) ++{ ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta= NULL; ++ _irqL irqL; ++ static u8 dialogtoken = 0; ++ u32 timeout_interval= TPK_RESEND_COUNT * 1000; //retry timer should set at least 301 sec, using TPK_count counting 301 times. ++ ++ if(ptdlsinfo->ap_prohibited == _TRUE) ++ goto exit; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ ++ //init peer sta_info ++ ptdls_sta = rtw_get_stainfo(pstapriv, mac_addr); ++ if(ptdls_sta==NULL) ++ { ++ ptdls_sta = rtw_alloc_stainfo(pstapriv, mac_addr); ++ if(ptdls_sta) ++ { ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if(!(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE)) ++ ptdlsinfo->sta_cnt++; ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if( ptdlsinfo->sta_cnt == (NUM_STA - 2) ) // -2: AP + BC/MC sta ++ { ++ ptdlsinfo->sta_maximum = _TRUE; ++ } ++ } ++ else ++ { ++ rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ } ++ ++ if(ptdls_sta){ ++ ptdls_sta->tdls_sta_state |= TDLS_RESPONDER_STATE; ++ //for tdls; ptdls_sta->aid is used to fill dialogtoken ++ ptdls_sta->dialog = dialogtoken; ++ dialogtoken = (dialogtoken+1)%256; ++ ptdls_sta->TDLS_PeerKey_Lifetime = timeout_interval; ++ _set_timer( &ptdls_sta->handshake_timer, TDLS_HANDSHAKE_TIME ); ++ } ++ ++ pattrib->qsel=pattrib->priority; ++ if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_REQUEST) !=_SUCCESS ){ ++ rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++ ++void issue_tdls_teardown(_adapter *padapter, u8 *mac_addr) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta=NULL; ++ _irqL irqL; ++ ++ ptdls_sta = rtw_get_stainfo(pstapriv, mac_addr); ++ if(ptdls_sta==NULL){ ++ DBG_871X("issue tdls teardown unsuccessful\n"); ++ return; ++ }else{ ++ ptdls_sta->tdls_sta_state=TDLS_STATE_NONE; ++ } ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_TEARDOWN) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++ if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE){ ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CS_OFF); ++ } ++ ++ if( ptdls_sta->timer_flag == 1 ) ++ { ++ _enter_critical_bh(&(padapter->tdlsinfo.hdl_lock), &irqL); ++ ptdls_sta->timer_flag = 2; ++ _exit_critical_bh(&(padapter->tdlsinfo.hdl_lock), &irqL); ++ } ++ else ++ rtw_tdls_cmd(padapter, mac_addr, TDLS_FREE_STA ); ++ ++ ++exit: ++ ++ return; ++} ++ ++void issue_tdls_dis_req(_adapter *padapter, u8 *mac_addr) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ u8 baddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ if(mac_addr == NULL) ++ _rtw_memcpy(pattrib->dst, baddr, ETH_ALEN); ++ else ++ _rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_DISCOVERY_REQUEST) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ DBG_871X("issue tdls dis req\n"); ++ ++exit: ++ ++ return; ++} ++ ++void issue_tdls_setup_rsp(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct rx_pkt_attrib *rx_pkt_pattrib = &precv_frame->u.hdr.attrib; ++ _irqL irqL; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, rx_pkt_pattrib->bssid, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_RESPONSE) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++ ++} ++ ++void issue_tdls_setup_cfm(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct sta_info *ptdls_sta=NULL; ++ _irqL irqL; ++ ++ struct rx_pkt_attrib *rx_pkt_pattrib = & precv_frame->u.hdr.attrib; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, rx_pkt_pattrib->bssid, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_CONFIRM) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++ ++} ++ ++//TDLS Discovery Response frame is a management action frame ++void issue_tdls_dis_rsp(_adapter *padapter, union recv_frame *precv_frame, u8 dialog) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ struct rx_pkt_attrib *rx_pkt_pattrib = &precv_frame->u.hdr.attrib; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ // unicast probe request frame ++ _rtw_memcpy(pwlanhdr->addr1, rx_pkt_pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pattrib->dst, pwlanhdr->addr1, ETH_ALEN); ++ ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pattrib->src, pwlanhdr->addr2, ETH_ALEN); ++ ++ _rtw_memcpy(pwlanhdr->addr3, rx_pkt_pattrib->bssid, ETH_ALEN); ++ _rtw_memcpy(pattrib->ra, pwlanhdr->addr3, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof (struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ rtw_build_tdls_dis_rsp_ies(padapter, pmgntframe, pframe, dialog); ++ ++ pattrib->nr_frags = 1; ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ return; ++} ++ ++void issue_tdls_peer_traffic_indication(_adapter *padapter, struct sta_info *ptdls_sta) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ ++ static u8 dialogtoken=0; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, ptdls_sta->hwaddr, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ //for tdls; pattrib->nr_frags is used to fill dialogtoken ++ ptdls_sta->dialog = dialogtoken; ++ dialogtoken = (dialogtoken+1)%256; ++ //PTI frame's priority should be AC_VO ++ pattrib->priority = 7; ++ ++ update_tdls_attrib(padapter, pattrib); ++ pattrib->qsel=pattrib->priority; ++ if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_PEER_TRAFFIC_INDICATION) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++ ++void issue_tdls_ch_switch_req(_adapter *padapter, u8 *mac_addr) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ ++ pattrib->qsel=pattrib->priority; ++ if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_CHANNEL_SWITCH_REQUEST) !=_SUCCESS ){ ++ rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++ ++void issue_tdls_ch_switch_rsp(_adapter *padapter, u8 *mac_addr) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ ++ _irqL irqL; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ ++ pmgntframe->frame_tag = DATA_FRAMETAG; ++ pattrib->ether_type = 0x890d; ++ pattrib->pctrl =0; ++ ++ _rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ ++ update_tdls_attrib(padapter, pattrib); ++ ++ pattrib->qsel=pattrib->priority; ++/* ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ if(xmitframe_enqueue_for_tdls_sleeping_sta(padapter, pmgntframe)==_TRUE){ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ return _FALSE; ++ } ++*/ ++ if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_CHANNEL_SWITCH_RESPONSE) !=_SUCCESS ){ ++ rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pmgntframe); ++ goto exit; ++ } ++ rtw_dump_xframe(padapter, pmgntframe); ++ ++exit: ++ ++ return; ++} ++ ++sint On_TDLS_Dis_Rsp(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct sta_info *ptdls_sta = NULL, *psta = rtw_get_stainfo(&(adapter->stapriv), get_bssid(&(adapter->mlmepriv))); ++ struct recv_priv *precvpriv = &(adapter->recvpriv); ++ u8 *ptr = precv_frame->u.hdr.rx_data, *psa; ++ struct rx_pkt_attrib *pattrib = &(precv_frame->u.hdr.attrib); ++ struct tdls_info *ptdlsinfo = &(adapter->tdlsinfo); ++ u8 empty_addr[ETH_ALEN] = { 0x00 }; ++ int UndecoratedSmoothedPWDB; ++ ++ ++ //WFDTDLS: for sigma test, not to setup direct link automatically ++ ptdlsinfo->dev_discovered = 1; ++ ++#ifdef CONFIG_TDLS_AUTOSETUP ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(&(adapter->stapriv), psa); ++ ++ if(ptdls_sta != NULL) ++ { ++ ptdls_sta->tdls_sta_state |= TDLS_ALIVE_STATE; ++ ++ //Record the tdls sta with lowest signal strength ++ if( (ptdlsinfo->sta_maximum == _TRUE) && (ptdls_sta->alive_count >= 1) ) ++ { ++ if( _rtw_memcmp(ptdlsinfo->ss_record.macaddr, empty_addr, ETH_ALEN) ) ++ { ++ _rtw_memcpy(ptdlsinfo->ss_record.macaddr, psa, ETH_ALEN); ++ ptdlsinfo->ss_record.RxPWDBAll = pattrib->RxPWDBAll; ++ } ++ else ++ { ++ if( ptdlsinfo->ss_record.RxPWDBAll < pattrib->RxPWDBAll ) ++ { ++ _rtw_memcpy(ptdlsinfo->ss_record.macaddr, psa, ETH_ALEN); ++ ptdlsinfo->ss_record.RxPWDBAll = pattrib->RxPWDBAll; ++ } ++ } ++ } ++ ++ } ++ else ++ { ++ if( ptdlsinfo->sta_maximum == _TRUE) ++ { ++ if( _rtw_memcmp( ptdlsinfo->ss_record.macaddr, empty_addr, ETH_ALEN ) ) ++ { ++ //All traffics are busy, do not set up another direct link. ++ return _FAIL; ++ } ++ else ++ { ++ if( pattrib->RxPWDBAll > ptdlsinfo->ss_record.RxPWDBAll ) ++ { ++ issue_tdls_teardown(adapter, ptdlsinfo->ss_record.macaddr); ++ } ++ else ++ { ++ return _FAIL; ++ } ++ } ++ } ++ ++ rtw_hal_get_def_var(adapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB); ++ ++ if( pattrib->RxPWDBAll + TDLS_SIGNAL_THRESH >= UndecoratedSmoothedPWDB); ++ { ++ DBG_871X("pattrib->RxPWDBAll=%d, pdmpriv->UndecoratedSmoothedPWDB=%d\n", pattrib->RxPWDBAll, UndecoratedSmoothedPWDB); ++ issue_tdls_setup_req(adapter, psa); ++ } ++ } ++#endif //CONFIG_TDLS_AUTOSETUP ++ ++ return _SUCCESS; ++} ++ ++sint On_TDLS_Setup_Req(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++ u8 *psa, *pmyid; ++ struct sta_info *ptdls_sta= NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ struct security_priv *psecuritypriv = &adapter->securitypriv; ++ _irqL irqL; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ u8 *prsnie, *ppairwise_cipher; ++ u8 i, k, pairwise_count; ++ u8 ccmp_have=0, rsnie_have=0; ++ u16 j; ++ u8 SNonce[32]; ++ u32 *timeout_interval; ++ sint parsing_length; //frame body length, without icv_len ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE = 5; ++ unsigned char supportRate[16]; ++ int supportRateNum = 0; ++ ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ ++ pmyid=myid(&(adapter->eeprompriv)); ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1; ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -ETH_TYPE_LEN ++ -PAYLOAD_TYPE_LEN ++ -FIXED_IE; ++ ++ if(ptdlsinfo->ap_prohibited == _TRUE) ++ { ++ goto exit; ++ } ++ ++ if(ptdls_sta==NULL){ ++ ptdls_sta = rtw_alloc_stainfo(pstapriv, psa); ++ }else{ ++ if(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE){ ++ //If the direct link is already set up ++ //Process as re-setup after tear down ++ DBG_871X("re-setup a direct link\n"); ++ } ++ //already receiving TDLS setup request ++ else if(ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE){ ++ DBG_871X("receive duplicated TDLS setup request frame in handshaking\n"); ++ goto exit; ++ } ++ //When receiving and sending setup_req to the same link at the same time, STA with higher MAC_addr would be initiator ++ //following is to check out MAC_addr ++ else if(ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE){ ++ DBG_871X("receive setup_req after sending setup_req\n"); ++ for (i=0;i<6;i++){ ++ if(*(pmyid+i)==*(psa+i)){ ++ } ++ else if(*(pmyid+i)>*(psa+i)){ ++ goto exit; ++ }else if(*(pmyid+i)<*(psa+i)){ ++ ptdls_sta->tdls_sta_state=TDLS_INITIATOR_STATE; ++ break; ++ } ++ } ++ } ++ } ++ ++ if(ptdls_sta) ++ { ++ ptdls_sta->dialog = *(ptr+2); //copy dialog token ++ ptdls_sta->stat_code = 0; ++ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _SUPPORTEDRATES_IE_: ++ _rtw_memcpy(supportRate, pIE->data, pIE->Length); ++ supportRateNum = pIE->Length; ++ break; ++ case _COUNTRY_IE_: ++ break; ++ case _EXT_SUPPORTEDRATES_IE_: ++ if(supportRateNum<=sizeof(supportRate)) ++ { ++ _rtw_memcpy(supportRate+supportRateNum, pIE->data, pIE->Length); ++ supportRateNum += pIE->Length; ++ } ++ break; ++ case _SUPPORTED_CH_IE_: ++ break; ++ case _RSN_IE_2_: ++ rsnie_have=1; ++ if(prx_pkt_attrib->encrypt){ ++ prsnie=(u8*)pIE; ++ //check whether initiator STA has CCMP pairwise_cipher. ++ ppairwise_cipher=prsnie+10; ++ _rtw_memcpy(&pairwise_count, (u16*)(ppairwise_cipher-2), 1); ++ for(k=0;kstat_code=72; ++ } ++ } ++ break; ++ case _EXT_CAP_IE_: ++ break; ++ case _VENDOR_SPECIFIC_IE_: ++ break; ++ case _FTIE_: ++ if(prx_pkt_attrib->encrypt) ++ _rtw_memcpy(SNonce, (ptr+j+52), 32); ++ break; ++ case _TIMEOUT_ITVL_IE_: ++ if(prx_pkt_attrib->encrypt) ++ timeout_interval = (u32 *)(ptr+j+3); ++ break; ++ case _RIC_Descriptor_IE_: ++ break; ++ case _HT_CAPABILITY_IE_: ++ rtw_tdls_process_ht_cap(adapter, ptdls_sta, pIE->data, pIE->Length); ++ break; ++ case EID_BSSCoexistence: ++ break; ++ case _LINK_ID_IE_: ++ if(_rtw_memcmp(get_bssid(pmlmepriv), pIE->data, 6) == _FALSE) ++ { ++ //not in the same BSS ++ ptdls_sta->stat_code=7; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ //update station supportRate ++ ptdls_sta->bssratelen = supportRateNum; ++ _rtw_memcpy(ptdls_sta->bssrateset, supportRate, supportRateNum); ++ ++ //check status code ++ //if responder STA has/hasn't security on AP, but request hasn't/has RSNIE, it should reject ++ if(ptdls_sta->stat_code == 0 ) ++ { ++ if(rsnie_have && (prx_pkt_attrib->encrypt==0)){ ++ //security disabled ++ ptdls_sta->stat_code = 5; ++ }else if(rsnie_have==0 && (prx_pkt_attrib->encrypt)){ ++ //request haven't RSNIE ++ ptdls_sta->stat_code = 38; ++ } ++ ++#ifdef CONFIG_WFD ++ //WFD test plan version 0.18.2 test item 5.1.5 ++ //SoUT does not use TDLS if AP uses weak security ++ if ( adapter->wdinfo.wfd_tdls_enable ) ++ { ++ if(rsnie_have && (prx_pkt_attrib->encrypt != _AES_)) ++ { ++ ptdls_sta->stat_code = 5; ++ } ++ } ++#endif //CONFIG_WFD ++ } ++ ++ ptdls_sta->tdls_sta_state|= TDLS_INITIATOR_STATE; ++ if(prx_pkt_attrib->encrypt){ ++ _rtw_memcpy(ptdls_sta->SNonce, SNonce, 32); ++ _rtw_memcpy(&(ptdls_sta->TDLS_PeerKey_Lifetime), timeout_interval, 4); ++ } ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if(!(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE)) ++ ptdlsinfo->sta_cnt++; ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ if( ptdlsinfo->sta_cnt == (NUM_STA - 2) ) // -2: AP + BC/MC sta ++ { ++ ptdlsinfo->sta_maximum = _TRUE; ++ } ++ ++#ifdef CONFIG_WFD ++ rtw_tdls_process_wfd_ie(ptdlsinfo, ptr + FIXED_IE, parsing_length - FIXED_IE); ++#endif // CONFIG_WFD ++ ++ } ++ else ++ { ++ goto exit; ++ } ++ ++ issue_tdls_setup_rsp(adapter, precv_frame); ++ ++ if(ptdls_sta->stat_code==0) ++ { ++ _set_timer( &ptdls_sta->handshake_timer, TDLS_HANDSHAKE_TIME); ++ } ++ else //status code!=0 ; setup unsuccess ++ { ++ free_tdls_sta(adapter, ptdls_sta); ++ } ++ ++exit: ++ ++ return _FAIL; ++} ++ ++sint On_TDLS_Setup_Rsp(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++ struct sta_info *ptdls_sta= NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ _irqL irqL; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ u8 *psa; ++ u16 stat_code; ++ sint parsing_length; //frame body length, without icv_len ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE =7; ++ u8 *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic, *ppairwise_cipher; ++ u16 pairwise_count, j, k; ++ u8 verify_ccmp=0; ++ unsigned char supportRate[16]; ++ int supportRateNum = 0; ++ ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ ++ if ( NULL == ptdls_sta ) ++ { ++ return _FAIL; ++ } ++ ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1; ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -TYPE_LENGTH_FIELD_SIZE ++ -1 ++ -FIXED_IE; ++ ++ _rtw_memcpy(&stat_code, ptr+2, 2); ++ ++ if(stat_code!=0) ++ { ++ DBG_871X( "[%s] status_code = %d, free_tdls_sta\n", __FUNCTION__, stat_code ); ++ free_tdls_sta(adapter, ptdls_sta); ++ return _FAIL; ++ } ++ ++ stat_code = 0; ++ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _SUPPORTEDRATES_IE_: ++ _rtw_memcpy(supportRate, pIE->data, pIE->Length); ++ supportRateNum = pIE->Length; ++ break; ++ case _COUNTRY_IE_: ++ break; ++ case _EXT_SUPPORTEDRATES_IE_: ++ if(supportRateNum<=sizeof(supportRate)) ++ { ++ _rtw_memcpy(supportRate+supportRateNum, pIE->data, pIE->Length); ++ supportRateNum += pIE->Length; ++ } ++ break; ++ case _SUPPORTED_CH_IE_: ++ break; ++ case _RSN_IE_2_: ++ prsnie=(u8*)pIE; ++ //check whether responder STA has CCMP pairwise_cipher. ++ ppairwise_cipher=prsnie+10; ++ _rtw_memcpy(&pairwise_count, (u16*)(ppairwise_cipher-2), 2); ++ for(k=0;kANonce, (ptr+j+20), 32); ++ break; ++ case _TIMEOUT_ITVL_IE_: ++ ptimeout_ie=(u8*)pIE; ++ break; ++ case _RIC_Descriptor_IE_: ++ break; ++ case _HT_CAPABILITY_IE_: ++ rtw_tdls_process_ht_cap(adapter, ptdls_sta, pIE->data, pIE->Length); ++ break; ++ case EID_BSSCoexistence: ++ break; ++ case _LINK_ID_IE_: ++ plinkid_ie=(u8*)pIE; ++ break; ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ //update station supportRate ++ ptdls_sta->bssratelen = supportRateNum; ++ _rtw_memcpy(ptdls_sta->bssrateset, supportRate, supportRateNum); ++ ++#ifdef CONFIG_WFD ++ rtw_tdls_process_wfd_ie(ptdlsinfo, ptr + FIXED_IE, parsing_length - FIXED_IE); ++#endif // CONFIG_WFD ++ ++ if(stat_code != 0) ++ { ++ ptdls_sta->stat_code = stat_code; ++ } ++ else ++ { ++ if(prx_pkt_attrib->encrypt) ++ { ++ if(verify_ccmp==1) ++ { ++ wpa_tdls_generate_tpk(adapter, ptdls_sta); ++ ptdls_sta->stat_code=0; ++ if(tdls_verify_mic(ptdls_sta->tpk.kck, 2, plinkid_ie, prsnie, ptimeout_ie, pftie)==0) //0: Invalid, 1: valid ++ { ++ free_tdls_sta(adapter, ptdls_sta); ++ return _FAIL; ++ } ++ } ++ else ++ { ++ ptdls_sta->stat_code=72; //invalide contents of RSNIE ++ } ++ ++ }else{ ++ ptdls_sta->stat_code=0; ++ } ++ } ++ ++ DBG_871X("issue_tdls_setup_cfm\n"); ++ issue_tdls_setup_cfm(adapter, precv_frame); ++ ++ if(ptdls_sta->stat_code==0) ++ { ++ ptdlsinfo->setup_state = TDLS_LINKED_STATE; ++ ++ if( ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE ) ++ { ++ ptdls_sta->tdls_sta_state |= TDLS_LINKED_STATE; ++ _cancel_timer_ex( &ptdls_sta->handshake_timer); ++#ifdef CONFIG_TDLS_AUTOCHECKALIVE ++ _set_timer( &ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1); ++#endif //CONFIG_TDLS_AUTOSETUP ++ } ++ ++ rtw_tdls_set_mac_id(ptdlsinfo, ptdls_sta); ++ rtw_tdls_set_key(adapter, prx_pkt_attrib, ptdls_sta); ++ ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_WRCR); ++ ++ } ++ else //status code!=0 ; setup unsuccessful ++ { ++ free_tdls_sta(adapter, ptdls_sta); ++ } ++ ++ return _FAIL; ++ ++} ++ ++sint On_TDLS_Setup_Cfm(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++ struct sta_info *ptdls_sta= NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ _irqL irqL; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ u8 *psa; ++ u16 stat_code; ++ sint parsing_length; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE =5; ++ u8 *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic, *ppairwise_cipher; ++ u16 j, pairwise_count; ++ ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1; ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -ETH_TYPE_LEN ++ -PAYLOAD_TYPE_LEN ++ -FIXED_IE; ++ _rtw_memcpy(&stat_code, ptr+2, 2); ++ ++ if(stat_code!=0){ ++ DBG_871X( "[%s] stat_code = %d\n, free_tdls_sta", __FUNCTION__, stat_code ); ++ free_tdls_sta(adapter, ptdls_sta); ++ return _FAIL; ++ } ++ ++ if(prx_pkt_attrib->encrypt){ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _RSN_IE_2_: ++ prsnie=(u8*)pIE; ++ break; ++ case _VENDOR_SPECIFIC_IE_: ++ break; ++ case _FTIE_: ++ pftie=(u8*)pIE; ++ break; ++ case _TIMEOUT_ITVL_IE_: ++ ptimeout_ie=(u8*)pIE; ++ break; ++ case _HT_EXTRA_INFO_IE_: ++ break; ++ case _LINK_ID_IE_: ++ plinkid_ie=(u8*)pIE; ++ break; ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ //verify mic in FTIE MIC field ++ if(tdls_verify_mic(ptdls_sta->tpk.kck, 3, plinkid_ie, prsnie, ptimeout_ie, pftie)==0){ //0: Invalid, 1: Valid ++ free_tdls_sta(adapter, ptdls_sta); ++ return _FAIL; ++ } ++ ++ } ++ ++ ptdlsinfo->setup_state = TDLS_LINKED_STATE; ++ if( ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE ) ++ { ++ ptdls_sta->tdls_sta_state|=TDLS_LINKED_STATE; ++ _cancel_timer_ex( &ptdls_sta->handshake_timer); ++#ifdef CONFIG_TDLS_AUTOCHECKALIVE ++ _set_timer( &ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1); ++#endif //CONFIG_TDLS_AUTOCHECKALIVE ++ } ++ ++ rtw_tdls_set_mac_id(ptdlsinfo, ptdls_sta); ++ rtw_tdls_set_key(adapter, prx_pkt_attrib, ptdls_sta); ++ ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_WRCR); ++ ++ return _FAIL; ++ ++} ++ ++sint On_TDLS_Dis_Req(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct sta_info *psta_ap; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ sint parsing_length; //frame body length, without icv_len ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE = 3, *dst, *pdialog = NULL; ++ u16 j; ++ ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len + LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE + 1; ++ pdialog=ptr+2; ++ ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -TYPE_LENGTH_FIELD_SIZE ++ -1 ++ -FIXED_IE; ++ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _LINK_ID_IE_: ++ psta_ap = rtw_get_stainfo(pstapriv, pIE->data); ++ if(psta_ap == NULL) ++ { ++ goto exit; ++ } ++ dst = pIE->data + 12; ++ if( (MacAddr_isBcst(dst) == _FALSE) && (_rtw_memcmp(myid(&(adapter->eeprompriv)), dst, 6) == _FALSE) ) ++ { ++ goto exit; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ //check frame contents ++ ++ issue_tdls_dis_rsp(adapter, precv_frame, *(pdialog) ); ++ ++exit: ++ ++ return _FAIL; ++ ++} ++ ++sint On_TDLS_Teardown(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ u8 *psa; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ struct mlme_ext_priv *pmlmeext = &(adapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ struct sta_info *ptdls_sta= NULL; ++ _irqL irqL; ++ ++ psa = get_sa(ptr); ++ ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ if(ptdls_sta!=NULL){ ++ if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE){ ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF); ++ } ++ free_tdls_sta(adapter, ptdls_sta); ++ } ++ ++ return _FAIL; ++ ++} ++ ++u8 TDLS_check_ch_state(uint state){ ++ if( (state & TDLS_CH_SWITCH_ON_STATE) && ++ (state & TDLS_AT_OFF_CH_STATE) && ++ (state & TDLS_PEER_AT_OFF_STATE) ){ ++ ++ if(state & TDLS_PEER_SLEEP_STATE) ++ return 2; //U-APSD + ch. switch ++ else ++ return 1; //ch. switch ++ }else ++ return 0; ++} ++ ++//we process buffered data for 1. U-APSD, 2. ch. switch, 3. U-APSD + ch. switch here ++sint On_TDLS_Peer_Traffic_Rsp(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct tdls_info *ptdlsinfo = &adapter->tdlsinfo; ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ //get peer sta infomation ++ struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->src); ++ u8 wmmps_ac=0, state=TDLS_check_ch_state(ptdls_sta->tdls_sta_state); ++ int i; ++ ++ ptdls_sta->sta_stats.rx_data_pkts++; ++ ++ //receive peer traffic response frame, sleeping STA wakes up ++ //ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_SLEEP_STATE); ++ process_wmmps_data( adapter, precv_frame); ++ ++ // if noticed peer STA wakes up by receiving peer traffic response ++ // and we want to do channel swtiching, then we will transmit channel switch request first ++ if(ptdls_sta->tdls_sta_state & TDLS_APSD_CHSW_STATE){ ++ issue_tdls_ch_switch_req(adapter, pattrib->src); ++ ptdls_sta->tdls_sta_state &= ~(TDLS_APSD_CHSW_STATE); ++ return _FAIL; ++ } ++ ++ //check 4-AC queue bit ++ if(ptdls_sta->uapsd_vo || ptdls_sta->uapsd_vi || ptdls_sta->uapsd_be || ptdls_sta->uapsd_bk) ++ wmmps_ac=1; ++ ++ //if it's a direct link and have buffered frame ++ if(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE){ ++ if(wmmps_ac && state) ++ { ++ _irqL irqL; ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ ++ _enter_critical_bh(&ptdls_sta->sleep_q.lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&ptdls_sta->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ //transmit buffered frames ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ xmitframe_plist = get_next(xmitframe_plist); ++ rtw_list_delete(&pxmitframe->list); ++ ++ ptdls_sta->sleepq_len--; ++ if(ptdls_sta->sleepq_len>0){ ++ pxmitframe->attrib.mdata = 1; ++ pxmitframe->attrib.eosp = 0; ++ }else{ ++ pxmitframe->attrib.mdata = 0; ++ pxmitframe->attrib.eosp = 1; ++ } ++ //pxmitframe->attrib.triggered = 1; //maybe doesn't need in TDLS ++ if(rtw_hal_xmit(adapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(adapter, pxmitframe); ++ } ++ ++ } ++ ++ if(ptdls_sta->sleepq_len==0) ++ { ++ DBG_871X("no buffered packets for tdls to xmit\n"); ++ //on U-APSD + CH. switch state, when there is no buffered date to xmit, ++ // we should go back to base channel ++ if(state==2){ ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF); ++ }else if(ptdls_sta->tdls_sta_state&TDLS_SW_OFF_STATE){ ++ ptdls_sta->tdls_sta_state &= ~(TDLS_SW_OFF_STATE); ++ ptdlsinfo->candidate_ch= pmlmeext->cur_channel; ++ issue_tdls_ch_switch_req(adapter, pattrib->src); ++ DBG_871X("issue tdls ch switch req back to base channel\n"); ++ } ++ ++ } ++ else ++ { ++ DBG_871X("error!psta->sleepq_len=%d\n", ptdls_sta->sleepq_len); ++ ptdls_sta->sleepq_len=0; ++ } ++ ++ _exit_critical_bh(&ptdls_sta->sleep_q.lock, &irqL); ++ ++ } ++ ++ } ++ ++ return _FAIL; ++} ++ ++sint On_TDLS_Ch_Switch_Req(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct sta_info *ptdls_sta= NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ u8 *psa; ++ sint parsing_length; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE =3; ++ u16 j; ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1; ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -ETH_TYPE_LEN ++ -PAYLOAD_TYPE_LEN ++ -FIXED_IE; ++ ++ ptdls_sta->off_ch = *(ptr+2); ++ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _COUNTRY_IE_: ++ break; ++ case _CH_SWTICH_ANNOUNCE_: ++ break; ++ case _LINK_ID_IE_: ++ break; ++ case _CH_SWITCH_TIMING_: ++ _rtw_memcpy(&ptdls_sta->ch_switch_time, pIE->data, 2); ++ _rtw_memcpy(&ptdls_sta->ch_switch_timeout, pIE->data+2, 2); ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ //todo: check status ++ ptdls_sta->stat_code=0; ++ ptdls_sta->tdls_sta_state |= TDLS_CH_SWITCH_ON_STATE; ++ ++ issue_nulldata(adapter, NULL, 1, 0, 0); ++ ++ issue_tdls_ch_switch_rsp(adapter, psa); ++ ++ DBG_871X("issue tdls channel switch response\n"); ++ ++ if((ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE) && ptdls_sta->off_ch==pmlmeext->cur_channel){ ++ DBG_871X("back to base channel %x\n", pmlmeext->cur_channel); ++ ptdls_sta->option=7; ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_BASE_CH); ++ }else{ ++ ptdls_sta->option=6; ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH); ++ } ++ return _FAIL; ++} ++ ++sint On_TDLS_Ch_Switch_Rsp(_adapter *adapter, union recv_frame *precv_frame) ++{ ++ struct sta_info *ptdls_sta= NULL; ++ struct sta_priv *pstapriv = &adapter->stapriv; ++ u8 *ptr = precv_frame->u.hdr.rx_data; ++ struct rx_pkt_attrib *prx_pkt_attrib = &precv_frame->u.hdr.attrib; ++ u8 *psa; ++ sint parsing_length; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 FIXED_IE =4; ++ u16 stat_code, j, switch_time, switch_timeout; ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ ++ psa = get_sa(ptr); ++ ptdls_sta = rtw_get_stainfo(pstapriv, psa); ++ ++ //if channel switch is running and receiving Unsolicited TDLS Channel Switch Response, ++ //it will go back to base channel and terminate this channel switch procedure ++ if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE ){ ++ if(pmlmeext->cur_channel==ptdls_sta->off_ch){ ++ DBG_871X("back to base channel %x\n", pmlmeext->cur_channel); ++ ptdls_sta->option=7; ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH); ++ }else{ ++ DBG_871X("receive unsolicited channel switch response \n"); ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF); ++ } ++ return _FAIL; ++ } ++ ++ //avoiding duplicated or unconditional ch. switch. rsp ++ if((ptdls_sta->tdls_sta_state & TDLS_CH_SW_INITIATOR_STATE) != TDLS_CH_SW_INITIATOR_STATE) ++ return _FAIL; ++ ++ ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1; ++ parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len ++ -prx_pkt_attrib->hdrlen ++ -prx_pkt_attrib->iv_len ++ -prx_pkt_attrib->icv_len ++ -LLC_HEADER_SIZE ++ -ETH_TYPE_LEN ++ -PAYLOAD_TYPE_LEN ++ -FIXED_IE; ++ ++ _rtw_memcpy(&stat_code, ptr+2, 2); ++ ++ if(stat_code!=0){ ++ return _FAIL; ++ } ++ ++ //parsing information element ++ for(j=FIXED_IE; jElementID) ++ { ++ case _LINK_ID_IE_: ++ break; ++ case _CH_SWITCH_TIMING_: ++ _rtw_memcpy(&switch_time, pIE->data, 2); ++ if(switch_time > ptdls_sta->ch_switch_time) ++ _rtw_memcpy(&ptdls_sta->ch_switch_time, &switch_time, 2); ++ ++ _rtw_memcpy(&switch_timeout, pIE->data+2, 2); ++ if(switch_timeout > ptdls_sta->ch_switch_timeout) ++ _rtw_memcpy(&ptdls_sta->ch_switch_timeout, &switch_timeout, 2); ++ ++ default: ++ break; ++ } ++ ++ j += (pIE->Length + 2); ++ ++ } ++ ++ ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SW_INITIATOR_STATE); ++ ptdls_sta->tdls_sta_state |=TDLS_CH_SWITCH_ON_STATE; ++ ++ //goto set_channel_workitem_callback() ++ ptdls_sta->option=6; ++ rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH); ++ ++ return _FAIL; ++} ++ ++#ifdef CONFIG_WFD ++void wfd_ie_tdls(_adapter * padapter, u8 *pframe, u32 *pktlen ) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wifi_display_info *pwfd_info = padapter->tdlsinfo.wfd_info; ++ u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 }; ++ u32 wfdielen = 0; ++ ++ // WFD OUI ++ wfdielen = 0; ++ wfdie[ wfdielen++ ] = 0x50; ++ wfdie[ wfdielen++ ] = 0x6F; ++ wfdie[ wfdielen++ ] = 0x9A; ++ wfdie[ wfdielen++ ] = 0x0A; // WFA WFD v1.0 ++ ++ // Commented by Albert 20110825 ++ // According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes ++ // 1. WFD Device Information ++ // 2. Associated BSSID ( Optional ) ++ // 3. Local IP Adress ( Optional ) ++ ++ // WFD Device Information ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value1: ++ // WFD device information ++ // available for WFD session + Preferred TDLS + WSD ( WFD Service Discovery ) ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL ++ | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_WSD); ++ wfdielen += 2; ++ ++ // Value2: ++ // Session Management Control Port ++ // Default TCP port for RTSP messages is 554 ++ RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport ); ++ wfdielen += 2; ++ ++ // Value3: ++ // WFD Device Maximum Throughput ++ // 300Mbps is the maximum throughput ++ RTW_PUT_BE16(wfdie + wfdielen, 300); ++ wfdielen += 2; ++ ++ // Associated BSSID ATTR ++ // Type: ++ wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0006); ++ wfdielen += 2; ++ ++ // Value: ++ // Associated BSSID ++ if ( check_fwstate( pmlmepriv, _FW_LINKED) == _TRUE ) ++ { ++ _rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ } ++ else ++ { ++ _rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN ); ++ } ++ ++ // Local IP Address ATTR ++ wfdie[ wfdielen++ ] = WFD_ATTR_LOCAL_IP_ADDR; ++ ++ // Length: ++ // Note: In the WFD specification, the size of length field is 2. ++ RTW_PUT_BE16(wfdie + wfdielen, 0x0005); ++ wfdielen += 2; ++ ++ // Version: ++ // 0x01: Version1;IPv4 ++ wfdie[ wfdielen++ ] = 0x01; ++ ++ // IPv4 Address ++ _rtw_memcpy( wfdie + wfdielen, pwfd_info->ip_address, 4 ); ++ wfdielen += 4; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, pktlen); ++ ++} ++#endif //CONFIG_WFD ++ ++void rtw_build_tdls_setup_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct sta_info *ptdls_sta=rtw_get_stainfo( (&padapter->stapriv) , pattrib->dst); ++ ++ u8 payload_type = 0x02; ++ u8 category = RTW_WLAN_CATEGORY_TDLS; ++ u8 action = TDLS_SETUP_REQUEST; ++ u8 bssrate[NDIS_802_11_LENGTH_RATES_EX]; //Use NDIS_802_11_LENGTH_RATES_EX in order to call func.rtw_set_supported_rate ++ int bssrate_len = 0, i = 0 ; ++ u8 more_supportedrates = 0; ++ unsigned int ie_len; ++ u8 *p; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ u8 link_id_addr[18] = {0}; ++ u8 iedata=0; ++ u8 sup_ch[ 30 * 2 ] = {0x00 }, sup_ch_idx = 0, idx_5g = 2; //For supported channel ++ u8 timeout_itvl[5]; //set timeout interval to maximum value ++ u32 time; ++ ++ //SNonce ++ if(pattrib->encrypt){ ++ for(i=0;i<8;i++){ ++ time=rtw_get_current_time(); ++ _rtw_memcpy(&ptdls_sta->SNonce[4*i], (u8 *)&time, 4); ++ } ++ } ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, dialog token ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen)); ++ ++ //capability ++ _rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2); ++ ++ if(pattrib->encrypt) ++ *pframe =*pframe | BIT(4); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //supported rates ++ rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N); ++ bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN; ++ ++ if (bssrate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen)); ++ more_supportedrates = 1; ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen)); ++ } ++ ++ //country(optional) ++ //extended supported rates ++ if(more_supportedrates==1){ ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen)); ++ } ++ ++ //supported channels ++ pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib); ++ ++ // SRC IE ++ pframe = rtw_set_ie( pframe, _SRC_IE_, 16, TDLS_SRC, &(pattrib->pktlen)); ++ ++ //RSNIE ++ if(pattrib->encrypt) ++ pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen)); ++ ++ //extended capabilities ++ pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen)); ++ ++ //QoS capability(WMM_IE) ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 7, TDLS_WMMIE, &(pattrib->pktlen)); ++ ++ ++ if(pattrib->encrypt){ ++ //FTIE ++ _rtw_memset(pframe, 0, 84); //All fields except SNonce shall be set to 0 ++ _rtw_memset(pframe, _FTIE_, 1); //version ++ _rtw_memset((pframe+1), 82, 1); //length ++ _rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32); ++ pframe += 84; ++ pattrib->pktlen += 84; ++ ++ //Timeout interval ++ timeout_itvl[0]=0x02; ++ _rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4); ++ pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl, &(pattrib->pktlen)); ++ } ++ ++ //Sup_reg_classes(optional) ++ //HT capabilities ++ pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib); ++ ++ //20/40 BSS coexistence ++ if(pmlmepriv->num_FortyMHzIntolerant>0) ++ iedata |= BIT(2);//20 MHz BSS Width Request ++ pframe = rtw_set_ie(pframe, EID_BSSCoexistence, 1, &iedata, &(pattrib->pktlen)); ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++#ifdef CONFIG_WFD ++ wfd_ie_tdls( padapter, pframe, &(pattrib->pktlen) ); ++#endif //CONFIG_WFD ++ ++} ++ ++void rtw_build_tdls_setup_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct sta_info *ptdls_sta; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_SETUP_RESPONSE; ++ unsigned char bssrate[NDIS_802_11_LENGTH_RATES_EX]; ++ int bssrate_len = 0; ++ u8 more_supportedrates = 0; ++ unsigned int ie_len; ++ unsigned char *p; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ u8 link_id_addr[18] = {0}; ++ u8 iedata=0; ++ u8 timeout_itvl[5]; //setup response timeout interval will copy from request ++ u8 ANonce[32]; //maybe it can put in ontdls_req ++ u8 k; //for random ANonce ++ u8 *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic; ++ u32 time; ++ ++ ptdls_sta = rtw_get_stainfo( &(padapter->stapriv) , pattrib->dst); ++ ++ if(ptdls_sta == NULL ) ++ { ++ DBG_871X("[%s] %d\n", __FUNCTION__, __LINE__); ++ return; ++ } ++ ++ if(pattrib->encrypt){ ++ for(k=0;k<8;k++){ ++ time=rtw_get_current_time(); ++ _rtw_memcpy(&ptdls_sta->ANonce[4*k], (u8*)&time, 4); ++ } ++ } ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, status code ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen)); ++ ++ if(ptdls_sta->stat_code!=0) //invalid setup request ++ { ++ DBG_871X("ptdls_sta->stat_code:%04x \n", ptdls_sta->stat_code); ++ return; ++ } ++ ++ //dialog token ++ pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen)); ++ ++ //capability ++ _rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2); ++ ++ if(pattrib->encrypt ) ++ *pframe =*pframe | BIT(4); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //supported rates ++ rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N); ++ bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN; ++ ++ if (bssrate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen)); ++ more_supportedrates = 1; ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen)); ++ } ++ ++ //country(optional) ++ //extended supported rates ++ if(more_supportedrates==1){ ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen)); ++ } ++ ++ //supported channels ++ pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib); ++ ++ // SRC IE ++ pframe = rtw_set_ie(pframe, _SRC_IE_ , 16, TDLS_SRC, &(pattrib->pktlen)); ++ ++ //RSNIE ++ if(pattrib->encrypt){ ++ prsnie = pframe; ++ pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen)); ++ } ++ ++ //extended capabilities ++ pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen)); ++ ++ //QoS capability(WMM_IE) ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 7, TDLS_WMMIE, &(pattrib->pktlen)); ++ ++ if(pattrib->encrypt){ ++ wpa_tdls_generate_tpk(padapter, ptdls_sta); ++ ++ //FTIE ++ pftie = pframe; ++ pftie_mic = pframe+4; ++ _rtw_memset(pframe, 0, 84); //All fields except SNonce shall be set to 0 ++ _rtw_memset(pframe, _FTIE_, 1); //version ++ _rtw_memset((pframe+1), 82, 1); //length ++ _rtw_memcpy((pframe+20), ptdls_sta->ANonce, 32); ++ _rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32); ++ pframe += 84; ++ pattrib->pktlen += 84; ++ ++ //Timeout interval ++ ptimeout_ie = pframe; ++ timeout_itvl[0]=0x02; ++ _rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4); ++ pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl, &(pattrib->pktlen)); ++ } ++ ++ //Sup_reg_classes(optional) ++ //HT capabilities ++ pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib); ++ ++ //20/40 BSS coexistence ++ if(pmlmepriv->num_FortyMHzIntolerant>0) ++ iedata |= BIT(2);//20 MHz BSS Width Request ++ pframe = rtw_set_ie(pframe, EID_BSSCoexistence, 1, &iedata, &(pattrib->pktlen)); ++ ++ //Link identifier ++ plinkid_ie = pframe; ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->dst, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->src, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++ //fill FTIE mic ++ if(pattrib->encrypt) ++ wpa_tdls_ftie_mic(ptdls_sta->tpk.kck, 2, plinkid_ie, prsnie, ptimeout_ie, pftie, pftie_mic); ++ ++#ifdef CONFIG_WFD ++ wfd_ie_tdls( padapter, pframe, &(pattrib->pktlen) ); ++#endif //CONFIG_WFD ++ ++} ++ ++void rtw_build_tdls_setup_cfm_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct sta_info *ptdls_sta=rtw_get_stainfo( (&padapter->stapriv) , pattrib->dst); ++ ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_SETUP_CONFIRM; ++ u8 more_supportedrates = 0; ++ unsigned int ie_len; ++ unsigned char *p; ++ u8 timeout_itvl[5]; //set timeout interval to maximum value ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ u8 link_id_addr[18] = {0}; ++ u8 *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, status code, dialog token ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen)); ++ ++ if(ptdls_sta->stat_code!=0) //invalid setup request ++ return; ++ ++ //RSNIE ++ if(pattrib->encrypt){ ++ prsnie = pframe; ++ pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen)); ++ } ++ ++ //EDCA param set; WMM param ele. ++ if(pattrib->encrypt){ ++ //FTIE ++ pftie = pframe; ++ pftie_mic = pframe+4; ++ _rtw_memset(pframe, 0, 84); //All fields except SNonce shall be set to 0 ++ _rtw_memset(pframe, _FTIE_, 1); //version ++ _rtw_memset((pframe+1), 82, 1); //length ++ _rtw_memcpy((pframe+20), ptdls_sta->ANonce, 32); ++ _rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32); ++ pframe += 84; ++ pattrib->pktlen += 84; ++ ++ //Timeout interval ++ ptimeout_ie = pframe; ++ timeout_itvl[0]=0x02; ++ _rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4); ++ ptdls_sta->TPK_count=0; ++ _set_timer(&ptdls_sta->TPK_timer, ptdls_sta->TDLS_PeerKey_Lifetime/TPK_RESEND_COUNT); ++ pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl, &(pattrib->pktlen)); ++ } ++ ++ //HT operation; todo ++ //Link identifier ++ plinkid_ie = pframe; ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++ //fill FTIE mic ++ if(pattrib->encrypt) ++ wpa_tdls_ftie_mic(ptdls_sta->tpk.kck, 3, plinkid_ie, prsnie, ptimeout_ie, pftie, pftie_mic); ++ ++} ++ ++void rtw_build_tdls_teardown_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_TEARDOWN; ++ u8 link_id_addr[18] = {0}; ++ ++ struct sta_info *ptdls_sta = rtw_get_stainfo( &(padapter->stapriv) , pattrib->dst); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, reason code ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen)); ++ ++ //Link identifier ++ if(ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE){ ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ }else if(ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE){ ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->dst, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->src, 6); ++ } ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++} ++ ++void rtw_build_tdls_dis_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 payload_type = 0x02; ++ u8 category = RTW_WLAN_CATEGORY_TDLS; ++ u8 action = TDLS_DISCOVERY_REQUEST; ++ u8 link_id_addr[18] = {0}; ++ static u8 dialogtoken=0; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, reason code ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogtoken), &(pattrib->pktlen)); ++ dialogtoken = (dialogtoken+1)%256; ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++} ++ ++void rtw_build_tdls_dis_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 dialog) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ ++ u8 category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = TDLS_DISCOVERY_RESPONSE; ++ u8 bssrate[NDIS_802_11_LENGTH_RATES_EX]; ++ int bssrate_len = 0; ++ u8 more_supportedrates = 0; ++ u8 *p; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ u8 link_id_addr[18] = {0}; ++ u8 iedata=0; ++ u8 timeout_itvl[5]; //set timeout interval to maximum value ++ u32 timeout_interval= TPK_RESEND_COUNT * 1000; ++ ++ //category, action, dialog token ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialog), &(pattrib->pktlen)); ++ ++ //capability ++ _rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2); ++ ++ if(pattrib->encrypt) ++ *pframe =*pframe | BIT(4); ++ pframe += 2; ++ pattrib->pktlen += 2; ++ ++ //supported rates ++ rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N); ++ bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN; ++ ++ if (bssrate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen)); ++ more_supportedrates = 1; ++ } ++ else ++ { ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen)); ++ } ++ ++ //extended supported rates ++ if(more_supportedrates==1){ ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen)); ++ } ++ ++ //supported channels ++ pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib); ++ ++ //RSNIE ++ if(pattrib->encrypt) ++ pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen)); ++ ++ //extended capability ++ pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen)); ++ ++ if(pattrib->encrypt){ ++ //FTIE ++ _rtw_memset(pframe, 0, 84); //All fields shall be set to 0 ++ _rtw_memset(pframe, _FTIE_, 1); //version ++ _rtw_memset((pframe+1), 82, 1); //length ++ pframe += 84; ++ pattrib->pktlen += 84; ++ ++ //Timeout interval ++ timeout_itvl[0]=0x02; ++ _rtw_memcpy(timeout_itvl+1, &timeout_interval, 4); ++ pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl, &(pattrib->pktlen)); ++ } ++ ++ //Sup_reg_classes(optional) ++ //HT capabilities ++ pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib); ++ ++ //20/40 BSS coexistence ++ if(pmlmepriv->num_FortyMHzIntolerant>0) ++ iedata |= BIT(2);//20 MHz BSS Width Request ++ pframe = rtw_set_ie(pframe, EID_BSSCoexistence, 1, &iedata, &(pattrib->pktlen)); ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->dst, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->src, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++} ++ ++void rtw_build_tdls_peer_traffic_indication_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_PEER_TRAFFIC_INDICATION; ++ ++ u8 link_id_addr[18] = {0}; ++ u8 AC_queue=0; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst); ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, reason code ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen)); ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++ //PTI control ++ //PU buffer status ++ if(ptdls_sta->uapsd_bk&BIT(1)) ++ AC_queue=BIT(0); ++ if(ptdls_sta->uapsd_be&BIT(1)) ++ AC_queue=BIT(1); ++ if(ptdls_sta->uapsd_vi&BIT(1)) ++ AC_queue=BIT(2); ++ if(ptdls_sta->uapsd_vo&BIT(1)) ++ AC_queue=BIT(3); ++ pframe = rtw_set_ie(pframe, _PTI_BUFFER_STATUS_, 1, &AC_queue, &(pattrib->pktlen)); ++ ++} ++ ++void rtw_build_tdls_ch_switch_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_CHANNEL_SWITCH_REQUEST; ++ u8 link_id_addr[18] = {0}; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst); ++ u8 ch_switch_timing[4] = {0}; ++ u16 switch_time= CH_SWITCH_TIME, switch_timeout=CH_SWITCH_TIMEOUT; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, target_ch ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(ptdlsinfo->candidate_ch), &(pattrib->pktlen)); ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++ //ch switch timing ++ _rtw_memcpy(ch_switch_timing, &switch_time, 2); ++ _rtw_memcpy(ch_switch_timing+2, &switch_timeout, 2); ++ pframe = rtw_set_ie(pframe, _CH_SWITCH_TIMING_, 4, ch_switch_timing, &(pattrib->pktlen)); ++ ++ //update ch switch attrib to sta_info ++ ptdls_sta->off_ch=ptdlsinfo->candidate_ch; ++ ptdls_sta->ch_switch_time=switch_time; ++ ptdls_sta->ch_switch_timeout=switch_timeout; ++ ++} ++ ++void rtw_build_tdls_ch_switch_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 payload_type = 0x02; ++ unsigned char category = RTW_WLAN_CATEGORY_TDLS; ++ unsigned char action = TDLS_CHANNEL_SWITCH_RESPONSE; ++ u8 link_id_addr[18] = {0}; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info; ++ u8 ch_switch_timing[4] = {0}; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, action, status_code ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen)); ++ ++ //Link identifier ++ _rtw_memcpy(link_id_addr, pattrib->ra, 6); ++ _rtw_memcpy((link_id_addr+6), pattrib->src, 6); ++ _rtw_memcpy((link_id_addr+12), pattrib->dst, 6); ++ pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen)); ++ ++ //ch switch timing ++ _rtw_memcpy(ch_switch_timing, &ptdls_sta->ch_switch_time, 2); ++ _rtw_memcpy(ch_switch_timing+2, &ptdls_sta->ch_switch_timeout, 2); ++ pframe = rtw_set_ie(pframe, _CH_SWITCH_TIMING_, 4, ch_switch_timing, &(pattrib->pktlen)); ++ ++} ++ ++#ifdef CONFIG_WFD ++void rtw_build_tunneled_probe_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct wifidirect_info *pbuddy_wdinfo = &padapter->pbuddy_adapter->wdinfo; ++ u8 payload_type = 0x02; ++ u8 category = RTW_WLAN_CATEGORY_P2P; ++ u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a}; ++ u8 probe_req = 4; ++ u8 wfdielen = 0; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, OUI, frame_body_type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 3, WFA_OUI, &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(probe_req), &(pattrib->pktlen)); ++ ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ wfdielen = build_probe_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++ else if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE)) ++ { ++ wfdielen = build_probe_req_wfd_ie(pbuddy_wdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++ ++} ++ ++void rtw_build_tunneled_probe_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe) ++{ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct wifidirect_info *pbuddy_wdinfo = &padapter->pbuddy_adapter->wdinfo; ++ u8 payload_type = 0x02; ++ u8 category = RTW_WLAN_CATEGORY_P2P; ++ u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a}; ++ u8 probe_rsp = 5; ++ u8 wfdielen = 0; ++ ++ //payload type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen)); ++ //category, OUI, frame_body_type ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 3, WFA_OUI, &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(probe_rsp), &(pattrib->pktlen)); ++ ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ wfdielen = build_probe_resp_wfd_ie(pwdinfo, pframe, 1); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++ else if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE)) ++ { ++ wfdielen = build_probe_resp_wfd_ie(pbuddy_wdinfo, pframe, 1); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++ } ++ ++} ++#endif //CONFIG_WFD ++ ++void _TPK_timer_hdl(void *FunctionContext) ++{ ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ ++ ptdls_sta->TPK_count++; ++ //TPK_timer set 1000 as default ++ //retry timer should set at least 301 sec. ++ if(ptdls_sta->TPK_count==TPK_RESEND_COUNT){ ++ ptdls_sta->TPK_count=0; ++ issue_tdls_setup_req(ptdls_sta->padapter, ptdls_sta->hwaddr); ++ } ++ ++ _set_timer(&ptdls_sta->TPK_timer, ptdls_sta->TDLS_PeerKey_Lifetime/TPK_RESEND_COUNT); ++} ++ ++void init_TPK_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ ++ _init_timer(&psta->TPK_timer, padapter->pnetdev, _TPK_timer_hdl, psta); ++} ++ ++// TDLS_DONE_CH_SEN: channel sensing and report candidate channel ++// TDLS_OFF_CH: first time set channel to off channel ++// TDLS_BASE_CH: when go back to the channel linked with AP, send null data to peer STA as an indication ++void _ch_switch_timer_hdl(void *FunctionContext) ++{ ++ ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ _adapter *padapter = ptdls_sta->padapter; ++ ++ if( ptdls_sta->option == TDLS_DONE_CH_SEN ){ ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_DONE_CH_SEN); ++ }else if( ptdls_sta->option == TDLS_OFF_CH ){ ++ issue_nulldata_to_TDLS_peer_STA(ptdls_sta->padapter, ptdls_sta, 0); ++ _set_timer(&ptdls_sta->base_ch_timer, 500); ++ }else if( ptdls_sta->option == TDLS_BASE_CH){ ++ issue_nulldata_to_TDLS_peer_STA(ptdls_sta->padapter, ptdls_sta, 0); ++ } ++} ++ ++void init_ch_switch_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ _init_timer(&psta->option_timer, padapter->pnetdev, _ch_switch_timer_hdl, psta); ++} ++ ++void _base_ch_timer_hdl(void *FunctionContext) ++{ ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ rtw_tdls_cmd(ptdls_sta->padapter, ptdls_sta->hwaddr, TDLS_P_OFF_CH); ++} ++ ++void init_base_ch_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ _init_timer(&psta->base_ch_timer, padapter->pnetdev, _base_ch_timer_hdl, psta); ++} ++ ++void _off_ch_timer_hdl(void *FunctionContext) ++{ ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ rtw_tdls_cmd(ptdls_sta->padapter, ptdls_sta->hwaddr, TDLS_P_BASE_CH ); ++} ++ ++void init_off_ch_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ _init_timer(&psta->off_ch_timer, padapter->pnetdev, _off_ch_timer_hdl, psta); ++} ++ ++void _tdls_handshake_timer_hdl(void *FunctionContext) ++{ ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ ++ if(ptdls_sta != NULL) ++ { ++ if( !(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE) ) ++ { ++ DBG_871X("tdls handshake time out\n"); ++ free_tdls_sta(ptdls_sta->padapter, ptdls_sta); ++ } ++ } ++} ++ ++void init_handshake_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ _init_timer(&psta->handshake_timer, padapter->pnetdev, _tdls_handshake_timer_hdl, psta); ++} ++ ++//Check tdls peer sta alive. ++void _tdls_alive_timer_phase1_hdl(void *FunctionContext) ++{ ++ _irqL irqL; ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ _adapter *padapter = ptdls_sta->padapter; ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ ++ _enter_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++ ptdls_sta->timer_flag = 1; ++ _exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++ ++ ptdls_sta->tdls_sta_state &= (~TDLS_ALIVE_STATE); ++ ++ DBG_871X("issue_tdls_dis_req to check alive\n"); ++ issue_tdls_dis_req( padapter, ptdls_sta->hwaddr); ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH1); ++ sta_update_last_rx_pkts(ptdls_sta); ++ ++ if ( ptdls_sta->timer_flag == 2 ) ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_FREE_STA); ++ else ++ { ++ _enter_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++ ptdls_sta->timer_flag = 0; ++ _exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++ } ++ ++} ++ ++void _tdls_alive_timer_phase2_hdl(void *FunctionContext) ++{ ++ _irqL irqL; ++ struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext; ++ _adapter *padapter = ptdls_sta->padapter; ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ ++ _enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL); ++ ptdls_sta->timer_flag = 1; ++ _exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++ ++ if( (ptdls_sta->tdls_sta_state & TDLS_ALIVE_STATE) && ++ (sta_last_rx_pkts(ptdls_sta) + 3 <= sta_rx_pkts(ptdls_sta)) ) ++ { ++ DBG_871X("TDLS STA ALIVE, ptdls_sta->sta_stats.last_rx_pkts:%llu, ptdls_sta->sta_stats.rx_pkts:%llu\n", ++ sta_last_rx_pkts(ptdls_sta), sta_rx_pkts(ptdls_sta)); ++ ++ ptdls_sta->alive_count = 0; ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH2); ++ } ++ else ++ { ++ if( !(ptdls_sta->tdls_sta_state & TDLS_ALIVE_STATE) ) ++ DBG_871X("TDLS STA TOO FAR\n"); ++ if( !(sta_last_rx_pkts(ptdls_sta) + 3 <= sta_rx_pkts(ptdls_sta))) ++ DBG_871X("TDLS LINK WITH LOW TRAFFIC, ptdls_sta->sta_stats.last_rx_pkts:%llu, ptdls_sta->sta_stats.rx_pkts:%llu\n", ++ sta_last_rx_pkts(ptdls_sta), sta_rx_pkts(ptdls_sta)); ++ ++ ptdls_sta->alive_count++; ++ if( ptdls_sta->alive_count == TDLS_ALIVE_COUNT ) ++ { ++ ptdls_sta->stat_code = _RSON_TDLS_TEAR_TOOFAR_; ++ issue_tdls_teardown(padapter, ptdls_sta->hwaddr); ++ } ++ else ++ { ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH2); ++ } ++ } ++ ++ if ( ptdls_sta->timer_flag == 2 ) ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_FREE_STA); ++ else ++ { ++ _enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL); ++ ptdls_sta->timer_flag = 0; ++ _exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL); ++} ++ ++} ++ ++void init_tdls_alive_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ psta->padapter=padapter; ++ _init_timer(&psta->alive_timer1, padapter->pnetdev, _tdls_alive_timer_phase1_hdl, psta); ++ _init_timer(&psta->alive_timer2, padapter->pnetdev, _tdls_alive_timer_phase2_hdl, psta); ++} ++ ++int update_sgi_tdls(_adapter *padapter, struct sta_info *psta) ++{ ++ struct ht_priv *psta_ht = NULL; ++ psta_ht = &psta->htpriv; ++ ++ if(psta_ht->ht_option) ++ { ++ return psta_ht->sgi; ++ } ++ else ++ return _FALSE; ++} ++ ++u32 update_mask_tdls(_adapter *padapter, struct sta_info *psta) ++{ ++ int i; ++ u8 rf_type, id; ++ unsigned char sta_band = 0; ++ unsigned char limit; ++ unsigned int tx_ra_bitmap=0; ++ struct ht_priv *psta_ht = NULL; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network; ++ ++ psta_ht = &psta->htpriv; ++ //b/g mode ra_bitmap ++ for (i=0; ibssrateset); i++) ++ { ++ if (psta->bssrateset[i]) ++ tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f); ++ } ++ ++ //n mode ra_bitmap ++ if(psta_ht->ht_option) ++ { ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ if(rf_type == RF_2T2R) ++ limit=16;// 2R ++ else ++ limit=8;// 1R ++ ++ for (i=0; iht_cap.supp_mcs_set[i/8] & BIT(i%8)) ++ tx_ra_bitmap |= BIT(i+12); ++ } ++ } ++ ++ if ( pcur_network->Configuration.DSConfig > 14 ) { ++ // 5G band ++ if (tx_ra_bitmap & 0xffff000) ++ sta_band |= WIRELESS_11_5N | WIRELESS_11A; ++ else ++ sta_band |= WIRELESS_11A; ++ } else { ++ if (tx_ra_bitmap & 0xffff000) ++ sta_band |= WIRELESS_11_24N | WIRELESS_11G | WIRELESS_11B; ++ else if (tx_ra_bitmap & 0xff0) ++ sta_band |= WIRELESS_11G |WIRELESS_11B; ++ else ++ sta_band |= WIRELESS_11B; ++ } ++ ++ id = networktype_to_raid(sta_band); ++ tx_ra_bitmap |= ((id<<28)&0xf0000000); ++ return tx_ra_bitmap; ++} ++ ++#endif //CONFIG_TDLS +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c +new file mode 100644 +index 000000000000..d671155f16ea +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c +@@ -0,0 +1,2304 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_WLAN_UTIL_C_ ++ ++#include ++#include ++#include ++#include ++ ++ ++unsigned char ARTHEROS_OUI1[] = {0x00, 0x03, 0x7f}; ++unsigned char ARTHEROS_OUI2[] = {0x00, 0x13, 0x74}; ++ ++unsigned char BROADCOM_OUI1[] = {0x00, 0x10, 0x18}; ++unsigned char BROADCOM_OUI2[] = {0x00, 0x0a, 0xf7}; ++unsigned char BROADCOM_OUI3[] = {0x00, 0x05, 0xb5}; ++ ++unsigned char CISCO_OUI[] = {0x00, 0x40, 0x96}; ++unsigned char MARVELL_OUI[] = {0x00, 0x50, 0x43}; ++unsigned char RALINK_OUI[] = {0x00, 0x0c, 0x43}; ++unsigned char REALTEK_OUI[] = {0x00, 0xe0, 0x4c}; ++unsigned char AIRGOCAP_OUI[] = {0x00, 0x0a, 0xf5}; ++ ++unsigned char REALTEK_96B_IE[] = {0x00, 0xe0, 0x4c, 0x02, 0x01, 0x20}; ++ ++extern unsigned char MCS_rate_2R[16]; ++#ifdef CONFIG_DISABLE_MCS13TO15 ++extern unsigned char MCS_rate_2R_MCS13TO15_OFF[16]; ++#endif //CONFIG_DISABLE_MCS13TO15 ++extern unsigned char MCS_rate_1R[16]; ++extern unsigned char RTW_WPA_OUI[]; ++extern unsigned char WPA_TKIP_CIPHER[4]; ++extern unsigned char RSN_TKIP_CIPHER[4]; ++ ++#define R2T_PHY_DELAY (0) ++ ++//#define WAIT_FOR_BCN_TO_MIN (3000) ++#define WAIT_FOR_BCN_TO_MIN (6000) ++#define WAIT_FOR_BCN_TO_MAX (20000) ++ ++static u8 rtw_basic_rate_cck[4] = { ++ IEEE80211_CCK_RATE_1MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_2MB|IEEE80211_BASIC_RATE_MASK, ++ IEEE80211_CCK_RATE_5MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_11MB|IEEE80211_BASIC_RATE_MASK ++}; ++ ++static u8 rtw_basic_rate_ofdm[3] = { ++ IEEE80211_OFDM_RATE_6MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_OFDM_RATE_12MB|IEEE80211_BASIC_RATE_MASK, ++ IEEE80211_OFDM_RATE_24MB|IEEE80211_BASIC_RATE_MASK ++}; ++ ++static u8 rtw_basic_rate_mix[7] = { ++ IEEE80211_CCK_RATE_1MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_2MB|IEEE80211_BASIC_RATE_MASK, ++ IEEE80211_CCK_RATE_5MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_11MB|IEEE80211_BASIC_RATE_MASK, ++ IEEE80211_OFDM_RATE_6MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_OFDM_RATE_12MB|IEEE80211_BASIC_RATE_MASK, ++ IEEE80211_OFDM_RATE_24MB|IEEE80211_BASIC_RATE_MASK ++}; ++ ++ ++int cckrates_included(unsigned char *rate, int ratelen) ++{ ++ int i; ++ ++ for(i = 0; i < ratelen; i++) ++ { ++ if ( (((rate[i]) & 0x7f) == 2) || (((rate[i]) & 0x7f) == 4) || ++ (((rate[i]) & 0x7f) == 11) || (((rate[i]) & 0x7f) == 22) ) ++ return _TRUE; ++ } ++ ++ return _FALSE; ++ ++} ++ ++int cckratesonly_included(unsigned char *rate, int ratelen) ++{ ++ int i; ++ ++ for(i = 0; i < ratelen; i++) ++ { ++ if ( (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) && ++ (((rate[i]) & 0x7f) != 11) && (((rate[i]) & 0x7f) != 22) ) ++ return _FALSE; ++ } ++ ++ return _TRUE; ++} ++ ++unsigned char networktype_to_raid(unsigned char network_type) ++{ ++ unsigned char raid; ++ ++ switch(network_type) ++ { ++ case WIRELESS_11B: ++ raid = 6; ++ break; ++ case WIRELESS_11A: ++ case WIRELESS_11G: ++ raid = 5; ++ break; ++ case WIRELESS_11BG: ++ raid = 4; ++ break; ++ case WIRELESS_11_24N: ++ case WIRELESS_11_5N: ++ raid = 3; ++ break; ++ case WIRELESS_11A_5N: ++ case WIRELESS_11G_24N: ++ raid = 1; ++ break; ++ case WIRELESS_11BG_24N: ++ raid = 0; ++ break; ++ default: ++ raid = 4; ++ break; ++ ++ } ++ ++ return raid; ++ ++} ++ ++int judge_network_type(_adapter *padapter, unsigned char *rate, int ratelen) ++{ ++ int network_type = 0; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ ++ if(pmlmeext->cur_channel > 14) ++ { ++ if (pmlmeinfo->HT_enable) ++ { ++ network_type = WIRELESS_11_5N; ++ } ++ ++ network_type |= WIRELESS_11A; ++ } ++ else ++ { ++ if (pmlmeinfo->HT_enable) ++ { ++ network_type = WIRELESS_11_24N; ++ } ++ ++ if ((cckratesonly_included(rate, ratelen)) == _TRUE) ++ { ++ network_type |= WIRELESS_11B; ++ } ++ else if((cckrates_included(rate, ratelen)) == _TRUE) ++ { ++ network_type |= WIRELESS_11BG; ++ } ++ else ++ { ++ network_type |= WIRELESS_11G; ++ } ++ } ++ ++ return network_type; ++} ++ ++unsigned char ratetbl_val_2wifirate(unsigned char rate); ++unsigned char ratetbl_val_2wifirate(unsigned char rate) ++{ ++ unsigned char val = 0; ++ ++ switch (rate & 0x7f) ++ { ++ case 0: ++ val = IEEE80211_CCK_RATE_1MB; ++ break; ++ ++ case 1: ++ val = IEEE80211_CCK_RATE_2MB; ++ break; ++ ++ case 2: ++ val = IEEE80211_CCK_RATE_5MB; ++ break; ++ ++ case 3: ++ val = IEEE80211_CCK_RATE_11MB; ++ break; ++ ++ case 4: ++ val = IEEE80211_OFDM_RATE_6MB; ++ break; ++ ++ case 5: ++ val = IEEE80211_OFDM_RATE_9MB; ++ break; ++ ++ case 6: ++ val = IEEE80211_OFDM_RATE_12MB; ++ break; ++ ++ case 7: ++ val = IEEE80211_OFDM_RATE_18MB; ++ break; ++ ++ case 8: ++ val = IEEE80211_OFDM_RATE_24MB; ++ break; ++ ++ case 9: ++ val = IEEE80211_OFDM_RATE_36MB; ++ break; ++ ++ case 10: ++ val = IEEE80211_OFDM_RATE_48MB; ++ break; ++ ++ case 11: ++ val = IEEE80211_OFDM_RATE_54MB; ++ break; ++ ++ } ++ ++ return val; ++ ++} ++ ++int is_basicrate(_adapter *padapter, unsigned char rate); ++int is_basicrate(_adapter *padapter, unsigned char rate) ++{ ++ int i; ++ unsigned char val; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ for(i = 0; i < NumRates; i++) ++ { ++ val = pmlmeext->basicrate[i]; ++ ++ if ((val != 0xff) && (val != 0xfe)) ++ { ++ if (rate == ratetbl_val_2wifirate(val)) ++ { ++ return _TRUE; ++ } ++ } ++ } ++ ++ return _FALSE; ++} ++ ++unsigned int ratetbl2rateset(_adapter *padapter, unsigned char *rateset); ++unsigned int ratetbl2rateset(_adapter *padapter, unsigned char *rateset) ++{ ++ int i; ++ unsigned char rate; ++ unsigned int len = 0; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ for (i = 0; i < NumRates; i++) ++ { ++ rate = pmlmeext->datarate[i]; ++ ++ switch (rate) ++ { ++ case 0xff: ++ return len; ++ ++ case 0xfe: ++ continue; ++ ++ default: ++ rate = ratetbl_val_2wifirate(rate); ++ ++ if (is_basicrate(padapter, rate) == _TRUE) ++ { ++ rate |= IEEE80211_BASIC_RATE_MASK; ++ } ++ ++ rateset[len] = rate; ++ len++; ++ break; ++ } ++ } ++ return len; ++} ++ ++ ++void get_rate_set(_adapter *padapter, unsigned char *pbssrate, int *bssrate_len) ++{ ++ unsigned char supportedrates[NumRates]; ++ ++ _rtw_memset(supportedrates, 0, NumRates); ++ *bssrate_len = ratetbl2rateset(padapter, supportedrates); ++ _rtw_memcpy(pbssrate, supportedrates, *bssrate_len); ++} ++ ++void UpdateBrateTbl( ++ IN PADAPTER Adapter, ++ IN u8 *mBratesOS ++) ++{ ++ u8 i; ++ u8 rate; ++ ++ // 1M, 2M, 5.5M, 11M, 6M, 12M, 24M are mandatory. ++ for(i=0;ipbuddy_adapter; ++ if(pbuddy_adapter) ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag)); ++#endif ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag)); ++ ++} ++ ++void Restore_DM_Func_Flag(_adapter *padapter) ++{ ++ u8 bSaveFlag = _FALSE; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ if(pbuddy_adapter) ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag)); ++#endif ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag)); ++} ++ ++void Switch_DM_Func(_adapter *padapter, u8 mode, u8 enable) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++#endif ++ ++ if(enable == _TRUE) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_adapter) ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_SET, (u8 *)(&mode)); ++#endif ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_SET, (u8 *)(&mode)); ++ } ++ else ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_adapter) ++ rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_CLR, (u8 *)(&mode)); ++#endif ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_CLR, (u8 *)(&mode)); ++ } ++ ++#if 0 ++ u8 val8; ++ ++ val8 = rtw_read8(padapter, FW_DYNAMIC_FUN_SWITCH); ++ ++ if(enable == _TRUE) ++ { ++ rtw_write8(padapter, FW_DYNAMIC_FUN_SWITCH, (val8 | mode)); ++ } ++ else ++ { ++ rtw_write8(padapter, FW_DYNAMIC_FUN_SWITCH, (val8 & mode)); ++ } ++#endif ++ ++} ++ ++static void Set_NETYPE1_MSR(_adapter *padapter, u8 type) ++{ ++ rtw_hal_set_hwreg(padapter, HW_VAR_MEDIA_STATUS1, (u8 *)(&type)); ++} ++ ++static void Set_NETYPE0_MSR(_adapter *padapter, u8 type) ++{ ++ rtw_hal_set_hwreg(padapter, HW_VAR_MEDIA_STATUS, (u8 *)(&type)); ++} ++ ++void Set_MSR(_adapter *padapter, u8 type) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type == IFACE_PORT1) ++ { ++ Set_NETYPE1_MSR(padapter, type); ++ } ++ else ++#endif ++ { ++ Set_NETYPE0_MSR(padapter, type); ++ } ++} ++ ++inline u8 rtw_get_oper_ch(_adapter *adapter) ++{ ++ return adapter_to_dvobj(adapter)->oper_channel; ++} ++ ++inline void rtw_set_oper_ch(_adapter *adapter, u8 ch) ++{ ++ if (adapter_to_dvobj(adapter)->oper_channel != ch) ++ adapter_to_dvobj(adapter)->on_oper_ch_time = rtw_get_current_time(); ++ ++ adapter_to_dvobj(adapter)->oper_channel = ch; ++} ++ ++inline u8 rtw_get_oper_bw(_adapter *adapter) ++{ ++ return adapter_to_dvobj(adapter)->oper_bwmode; ++} ++ ++inline void rtw_set_oper_bw(_adapter *adapter, u8 bw) ++{ ++ adapter_to_dvobj(adapter)->oper_bwmode = bw; ++} ++ ++inline u8 rtw_get_oper_choffset(_adapter *adapter) ++{ ++ return adapter_to_dvobj(adapter)->oper_ch_offset; ++} ++ ++inline void rtw_set_oper_choffset(_adapter *adapter, u8 offset) ++{ ++ adapter_to_dvobj(adapter)->oper_ch_offset = offset; ++} ++ ++inline u32 rtw_get_on_oper_ch_time(_adapter *adapter) ++{ ++ return adapter_to_dvobj(adapter)->on_oper_ch_time; ++} ++ ++inline u32 rtw_get_on_cur_ch_time(_adapter *adapter) ++{ ++ if (adapter->mlmeextpriv.cur_channel == adapter_to_dvobj(adapter)->oper_channel) ++ return adapter_to_dvobj(adapter)->on_oper_ch_time; ++ else ++ return 0; ++} ++ ++void SelectChannel(_adapter *padapter, unsigned char channel) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ //saved channel info ++ rtw_set_oper_ch(padapter, channel); ++ dc_SelectChannel(padapter, channel); ++#else //CONFIG_DUALMAC_CONCURRENT ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL); ++ ++ //saved channel info ++ rtw_set_oper_ch(padapter, channel); ++ ++ rtw_hal_set_chan(padapter, channel); ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL); ++ ++#endif // CONFIG_DUALMAC_CONCURRENT ++} ++ ++void SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ //saved bw info ++ rtw_set_oper_bw(padapter, bwmode); ++ rtw_set_oper_choffset(padapter, channel_offset); ++ dc_SetBWMode(padapter, bwmode, channel_offset); ++#else //CONFIG_DUALMAC_CONCURRENT ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->setbw_mutex), NULL); ++ ++ //saved bw info ++ rtw_set_oper_bw(padapter, bwmode); ++ rtw_set_oper_choffset(padapter, channel_offset); ++ ++ rtw_hal_set_bwmode(padapter, (HT_CHANNEL_WIDTH)bwmode, channel_offset); ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->setbw_mutex), NULL); ++ ++#endif // CONFIG_DUALMAC_CONCURRENT ++} ++ ++void set_channel_bwmode(_adapter *padapter, unsigned char channel, unsigned char channel_offset, unsigned short bwmode) ++{ ++ u8 center_ch; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ if ( padapter->bNotifyChannelChange ) ++ { ++ DBG_871X( "[%s] ch = %d, offset = %d, bwmode = %d\n", __FUNCTION__, channel, channel_offset, bwmode ); ++ } ++ ++ if((bwmode == HT_CHANNEL_WIDTH_20)||(channel_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)) ++ { ++ //SelectChannel(padapter, channel); ++ center_ch = channel; ++ } ++ else ++ { ++ //switch to the proper channel ++ if (channel_offset == HAL_PRIME_CHNL_OFFSET_LOWER) ++ { ++ //SelectChannel(padapter, channel + 2); ++ center_ch = channel + 2; ++ } ++ else ++ { ++ //SelectChannel(padapter, channel - 2); ++ center_ch = channel - 2; ++ } ++ } ++ ++ //set Channel , must be independant for correct co_ch value/ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ //saved channel/bw info ++ rtw_set_oper_ch(padapter, channel); ++ rtw_set_oper_bw(padapter, bwmode); ++ rtw_set_oper_choffset(padapter, channel_offset); ++ dc_SelectChannel(padapter, center_ch);// set center channel ++#else //CONFIG_DUALMAC_CONCURRENT ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL); ++ ++ //saved channel/bw info ++ rtw_set_oper_ch(padapter, channel); ++ rtw_set_oper_bw(padapter, bwmode); ++ rtw_set_oper_choffset(padapter, channel_offset); ++ ++ rtw_hal_set_chan(padapter, center_ch); ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL); ++ ++#endif // CONFIG_DUALMAC_CONCURRENT ++ ++ ++ //set BandWidth ++ SetBWMode(padapter, bwmode, channel_offset); ++ ++} ++ ++int get_bsstype(unsigned short capability) ++{ ++ if (capability & BIT(0)) ++ { ++ return WIFI_FW_AP_STATE; ++ } ++ else if (capability & BIT(1)) ++ { ++ return WIFI_FW_ADHOC_STATE; ++ } ++ else ++ { ++ return 0; ++ } ++} ++ ++__inline u8 *get_my_bssid(WLAN_BSSID_EX *pnetwork) ++{ ++ return (pnetwork->MacAddress); ++} ++ ++u16 get_beacon_interval(WLAN_BSSID_EX *bss) ++{ ++ unsigned short val; ++ _rtw_memcpy((unsigned char *)&val, rtw_get_beacon_interval_from_ie(bss->IEs), 2); ++ ++ return le16_to_cpu(val); ++ ++} ++ ++int is_client_associated_to_ap(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext; ++ struct mlme_ext_info *pmlmeinfo; ++ ++ if(!padapter) ++ return _FAIL; ++ ++ pmlmeext = &padapter->mlmeextpriv; ++ pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if ((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)) ++ { ++ return _TRUE; ++ } ++ else ++ { ++ return _FAIL; ++ } ++} ++ ++int is_client_associated_to_ibss(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if ((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)) ++ { ++ return _TRUE; ++ } ++ else ++ { ++ return _FAIL; ++ } ++} ++ ++int is_IBSS_empty(_adapter *padapter) ++{ ++ unsigned int i; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ for (i = IBSS_START_MAC_ID; i < NUM_STA; i++) ++ { ++ if (pmlmeinfo->FW_sta_info[i].status == 1) ++ { ++ return _FAIL; ++ } ++ } ++ ++ return _TRUE; ++ ++} ++ ++unsigned int decide_wait_for_beacon_timeout(unsigned int bcn_interval) ++{ ++ if ((bcn_interval << 2) < WAIT_FOR_BCN_TO_MIN) ++ { ++ return WAIT_FOR_BCN_TO_MIN; ++ } ++ else if ((bcn_interval << 2) > WAIT_FOR_BCN_TO_MAX) ++ { ++ return WAIT_FOR_BCN_TO_MAX; ++ } ++ else ++ { ++ return ((bcn_interval << 2)); ++ } ++} ++ ++void CAM_empty_entry( ++ PADAPTER Adapter, ++ u8 ucIndex ++) ++{ ++ rtw_hal_set_hwreg(Adapter, HW_VAR_CAM_EMPTY_ENTRY, (u8 *)(&ucIndex)); ++} ++ ++void invalidate_cam_all(_adapter *padapter) ++{ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0); ++} ++#if 0 ++static u32 _ReadCAM(_adapter *padapter ,u32 addr) ++{ ++ u32 count = 0, cmd; ++ cmd = CAM_POLLINIG |addr ; ++ rtw_write32(padapter, RWCAM, cmd); ++ ++ do{ ++ if(0 == (rtw_read32(padapter,REG_CAMCMD) & CAM_POLLINIG)){ ++ break; ++ } ++ }while(count++ < 100); ++ ++ return rtw_read32(padapter,REG_CAMREAD); ++} ++void read_cam(_adapter *padapter ,u8 entry) ++{ ++ u32 j,count = 0, addr, cmd; ++ addr = entry << 3; ++ ++ printk("********* DUMP CAM Entry_#%02d***************\n",entry); ++ for (j = 0; j < 6; j++) ++ { ++ cmd = _ReadCAM(padapter ,addr+j); ++ printk("offset:0x%02x => 0x%08x \n",addr+j,cmd); ++ } ++ printk("*********************************\n"); ++} ++#endif ++ ++void write_cam(_adapter *padapter, u8 entry, u16 ctrl, u8 *mac, u8 *key) ++{ ++ unsigned int i, val, addr; ++ //unsigned int cmd; ++ int j; ++ u32 cam_val[2]; ++ ++ addr = entry << 3; ++ ++ for (j = 5; j >= 0; j--) ++ { ++ switch (j) ++ { ++ case 0: ++ val = (ctrl | (mac[0] << 16) | (mac[1] << 24) ); ++ break; ++ ++ case 1: ++ val = (mac[2] | ( mac[3] << 8) | (mac[4] << 16) | (mac[5] << 24)); ++ break; ++ ++ default: ++ i = (j - 2) << 2; ++ val = (key[i] | (key[i+1] << 8) | (key[i+2] << 16) | (key[i+3] << 24)); ++ break; ++ ++ } ++ ++ cam_val[0] = val; ++ cam_val[1] = addr + (unsigned int)j; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val); ++ ++ //rtw_write32(padapter, WCAMI, val); ++ ++ //cmd = CAM_POLLINIG | CAM_WRITE | (addr + j); ++ //rtw_write32(padapter, RWCAM, cmd); ++ ++ //DBG_871X("%s=> cam write: %x, %x\n",__FUNCTION__, cmd, val); ++ ++ } ++ ++} ++ ++void clear_cam_entry(_adapter *padapter, u8 entry) ++{ ++#if 0 ++ u32 addr, val=0; ++ u32 cam_val[2]; ++ ++ addr = entry << 3; ++ ++ ++ cam_val[0] = val; ++ cam_val[1] = addr + (unsigned int)0; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val); ++ ++ ++ ++ cam_val[0] = val; ++ cam_val[1] = addr + (unsigned int)1; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val); ++#else ++ ++ unsigned char null_sta[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; ++ ++ unsigned char null_key[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00}; ++ ++ write_cam(padapter, entry, 0, null_sta, null_key); ++ ++#endif ++} ++ ++int allocate_fw_sta_entry(_adapter *padapter) ++{ ++ unsigned int mac_id; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ for (mac_id = IBSS_START_MAC_ID; mac_id < NUM_STA; mac_id++) ++ { ++ if (pmlmeinfo->FW_sta_info[mac_id].status == 0) ++ { ++ pmlmeinfo->FW_sta_info[mac_id].status = 1; ++ pmlmeinfo->FW_sta_info[mac_id].retry = 0; ++ break; ++ } ++ } ++ ++ return mac_id; ++} ++ ++void flush_all_cam_entry(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ //if(check_buddy_mlmeinfo_state(padapter, _HW_STATE_NOLINK_)) ++ if(check_buddy_fwstate(padapter, _FW_LINKED) == _FALSE) ++ { ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0); ++ } ++ else ++ { ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE)) ++ { ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta; ++ u8 cam_id;//cam_entry ++ ++ psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress); ++ if(psta) { ++ if(psta->state & WIFI_AP_STATE) ++ {} //clear cam when ap free per sta_info ++ else { ++ if(psta->mac_id==2) ++ cam_id = 5; ++ else ++ cam_id = 4; ++ } ++ //clear_cam_entry(padapter, cam_id); ++ rtw_clearstakey_cmd(padapter, (u8*)psta, cam_id, _FALSE); ++ } ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ //clear cam when ap free per sta_info ++ } ++ } ++#else //CONFIG_CONCURRENT_MODE ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0); ++ ++#endif //CONFIG_CONCURRENT_MODE ++ ++ _rtw_memset((u8 *)(pmlmeinfo->FW_sta_info), 0, sizeof(pmlmeinfo->FW_sta_info)); ++ ++} ++ ++#if defined(CONFIG_P2P) && defined(CONFIG_WFD) ++int WFD_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct wifidirect_info *pwdinfo; ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ u32 wfd_ielen = 0; ++ ++ ++ pwdinfo = &padapter->wdinfo; ++ if ( rtw_get_wfd_ie( ( u8* ) pIE, pIE->Length, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 attr_content[ 10 ] = { 0x00 }; ++ u32 attr_contentlen = 0; ++ ++ printk( "[%s] Found WFD IE\n", __FUNCTION__ ); ++ rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen); ++ if ( attr_contentlen ) ++ { ++ pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 ); ++ DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ return( _TRUE ); ++ } ++ } ++ else ++ { ++ printk( "[%s] NO WFD IE\n", __FUNCTION__ ); ++ ++ } ++ return( _FAIL ); ++} ++#endif ++ ++int WMM_param_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ //struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if(pmlmepriv->qospriv.qos_option==0) ++ { ++ pmlmeinfo->WMM_enable = 0; ++ return _FAIL; ++ } ++ ++ pmlmeinfo->WMM_enable = 1; ++ _rtw_memcpy(&(pmlmeinfo->WMM_param), (pIE->data + 6), sizeof(struct WMM_para_element)); ++ return _TRUE; ++ ++ /*if (pregpriv->wifi_spec == 1) ++ { ++ if (pmlmeinfo->WMM_enable == 1) ++ { ++ //todo: compare the parameter set count & decide wheher to update or not ++ return _FAIL; ++ } ++ else ++ { ++ pmlmeinfo->WMM_enable = 1; ++ _rtw_rtw_memcpy(&(pmlmeinfo->WMM_param), (pIE->data + 6), sizeof(struct WMM_para_element)); ++ return _TRUE; ++ } ++ } ++ else ++ { ++ pmlmeinfo->WMM_enable = 0; ++ return _FAIL; ++ }*/ ++ ++} ++ ++void WMMOnAssocRsp(_adapter *padapter) ++{ ++ u8 ACI, ACM, AIFS, ECWMin, ECWMax, aSifsTime; ++ u8 acm_mask; ++ u16 TXOP; ++ u32 acParm, i; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if (pmlmeinfo->WMM_enable == 0) ++ { ++ padapter->mlmepriv.acm_mask = 0; ++ return; ++ } ++ ++ acm_mask = 0; ++ ++ if( pmlmeext->cur_wireless_mode == WIRELESS_11B) ++ aSifsTime = 10; ++ else ++ aSifsTime = 16; ++ ++ for (i = 0; i < 4; i++) ++ { ++ ACI = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN >> 5) & 0x03; ++ ACM = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN >> 4) & 0x01; ++ ++ //AIFS = AIFSN * slot time + SIFS - r2t phy delay ++ AIFS = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN & 0x0f) * pmlmeinfo->slotTime + aSifsTime; ++ ++ ECWMin = (pmlmeinfo->WMM_param.ac_param[i].CW & 0x0f); ++ ECWMax = (pmlmeinfo->WMM_param.ac_param[i].CW & 0xf0) >> 4; ++ TXOP = le16_to_cpu(pmlmeinfo->WMM_param.ac_param[i].TXOP_limit); ++ ++ acParm = AIFS | (ECWMin << 8) | (ECWMax << 12) | (TXOP << 16); ++ ++ switch (ACI) ++ { ++ case 0x0: ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acParm)); ++ acm_mask |= (ACM? BIT(1):0); ++ break; ++ ++ case 0x1: ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acParm)); ++ //acm_mask |= (ACM? BIT(0):0); ++ break; ++ ++ case 0x2: ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acParm)); ++ acm_mask |= (ACM? BIT(2):0); ++ break; ++ ++ case 0x3: ++ rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acParm)); ++ acm_mask |= (ACM? BIT(3):0); ++ break; ++ } ++ ++ DBG_871X("WMM(%x): %x, %x\n", ACI, ACM, acParm); ++ } ++ ++ if(padapter->registrypriv.acm_method == 1) ++ rtw_hal_set_hwreg(padapter, HW_VAR_ACM_CTRL, (u8 *)(&acm_mask)); ++ else ++ padapter->mlmepriv.acm_mask = acm_mask; ++ ++ return; ++} ++ ++static void bwmode_update_check(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ unsigned char new_bwmode; ++ unsigned char new_ch_offset; ++ struct HT_info_element *pHT_info; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ u8 cbw40_enable=0; ++ ++ if(!pIE) ++ return; ++ ++ if(phtpriv->ht_option == _FALSE) return; ++ ++ if(pIE->Length > sizeof(struct HT_info_element)) ++ return; ++ ++ pHT_info = (struct HT_info_element *)pIE->data; ++ ++ if (pmlmeext->cur_channel > 14) { ++ if (pregistrypriv->cbw40_enable & BIT(1)) ++ cbw40_enable = 1; ++ } else { ++ if (pregistrypriv->cbw40_enable & BIT(0)) ++ cbw40_enable = 1; ++ } ++ ++ if((pHT_info->infos[0] & BIT(2)) && cbw40_enable ) ++ { ++ new_bwmode = HT_CHANNEL_WIDTH_40; ++ ++ switch (pHT_info->infos[0] & 0x3) ++ { ++ case 1: ++ new_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ ++ case 3: ++ new_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ ++ default: ++ new_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ } ++ } ++ else ++ { ++ new_bwmode = HT_CHANNEL_WIDTH_20; ++ new_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ } ++ ++ ++ if((new_bwmode!= pmlmeext->cur_bwmode) || (new_ch_offset!=pmlmeext->cur_ch_offset)) ++ { ++ pmlmeinfo->bwmode_updated = _TRUE; ++ ++ pmlmeext->cur_bwmode = new_bwmode; ++ pmlmeext->cur_ch_offset = new_ch_offset; ++ ++ //update HT info also ++ HT_info_handler(padapter, pIE); ++ } ++ else ++ { ++ pmlmeinfo->bwmode_updated = _FALSE; ++ } ++ ++ ++ if(_TRUE == pmlmeinfo->bwmode_updated) ++ { ++ struct sta_info *psta; ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ //set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++ ++ //update ap's stainfo ++ psta = rtw_get_stainfo(pstapriv, cur_network->MacAddress); ++ if(psta) ++ { ++ struct ht_priv *phtpriv_sta = &psta->htpriv; ++ ++ if(phtpriv_sta->ht_option) ++ { ++ // bwmode ++ phtpriv_sta->bwmode = pmlmeext->cur_bwmode; ++ phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset; ++ } ++ else ++ { ++ phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_20; ++ phtpriv_sta->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ } ++ ++ } ++ ++ //pmlmeinfo->bwmode_updated = _FALSE;//bwmode_updated done, reset it! ++ ++ } ++ ++} ++ ++void HT_caps_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ unsigned int i; ++ u8 rf_type; ++ u8 max_AMPDU_len, min_MPDU_spacing; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ ++ if(pIE==NULL) return; ++ ++ if(phtpriv->ht_option == _FALSE) return; ++ ++ pmlmeinfo->HT_caps_enable = 1; ++ ++ for (i = 0; i < (pIE->Length); i++) ++ { ++ if (i != 2) ++ { ++ // Commented by Albert 2010/07/12 ++ // Got the endian issue here. ++ pmlmeinfo->HT_caps.u.HT_cap[i] &= (pIE->data[i]); ++ } ++ else ++ { ++ //modify from fw by Thomas 2010/11/17 ++ if ((pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x3) > (pIE->data[i] & 0x3)) ++ { ++ max_AMPDU_len = (pIE->data[i] & 0x3); ++ } ++ else ++ { ++ max_AMPDU_len = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x3); ++ } ++ ++ if ((pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) > (pIE->data[i] & 0x1c)) ++ { ++ min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c); ++ } ++ else ++ { ++ min_MPDU_spacing = (pIE->data[i] & 0x1c); ++ } ++ ++ pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para = max_AMPDU_len | min_MPDU_spacing; ++ } ++ } ++ ++ // Commented by Albert 2010/07/12 ++ // Have to handle the endian issue after copying. ++ // HT_ext_caps didn't be used yet. ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info = le16_to_cpu( pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info ); ++ pmlmeinfo->HT_caps.u.HT_cap_element.HT_ext_caps = le16_to_cpu( pmlmeinfo->HT_caps.u.HT_cap_element.HT_ext_caps ); ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ //update the MCS rates ++ for (i = 0; i < 16; i++) ++ { ++ if((rf_type == RF_1T1R) || (rf_type == RF_1T2R)) ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ } ++ else ++ { ++ #ifdef CONFIG_DISABLE_MCS13TO15 ++ if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && (pregistrypriv->wifi_spec!=1)) ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R_MCS13TO15_OFF[i]; ++ else ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i]; ++ #else ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i]; ++ #endif //CONFIG_DISABLE_MCS13TO15 ++ } ++ #ifdef RTL8192C_RECONFIG_TO_1T1R ++ { ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ } ++ #endif ++ ++ if(pregistrypriv->special_rf_path) ++ pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ ++ } ++ ++ return; ++} ++ ++void HT_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ ++ if(pIE==NULL) return; ++ ++ if(phtpriv->ht_option == _FALSE) return; ++ ++ ++ if(pIE->Length > sizeof(struct HT_info_element)) ++ return; ++ ++ pmlmeinfo->HT_info_enable = 1; ++ _rtw_memcpy(&(pmlmeinfo->HT_info), pIE->data, pIE->Length); ++ ++ return; ++} ++ ++void HTOnAssocRsp(_adapter *padapter) ++{ ++ unsigned char max_AMPDU_len; ++ unsigned char min_MPDU_spacing; ++ //struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ if ((pmlmeinfo->HT_info_enable) && (pmlmeinfo->HT_caps_enable)) ++ { ++ pmlmeinfo->HT_enable = 1; ++ } ++ else ++ { ++ pmlmeinfo->HT_enable = 0; ++ //set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ return; ++ } ++ ++ //handle A-MPDU parameter field ++ /* ++ AMPDU_para [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k ++ AMPDU_para [4:2]:Min MPDU Start Spacing ++ */ ++ max_AMPDU_len = pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x03; ++ ++ min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) >> 2; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing)); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len)); ++ ++#if 0 //move to rtw_update_ht_cap() ++ if ((pregpriv->cbw40_enable) && ++ (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & BIT(1)) && ++ (pmlmeinfo->HT_info.infos[0] & BIT(2))) ++ { ++ //switch to the 40M Hz mode accoring to the AP ++ pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40; ++ switch ((pmlmeinfo->HT_info.infos[0] & 0x3)) ++ { ++ case HT_EXTCHNL_OFFSET_UPPER: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER; ++ break; ++ ++ case HT_EXTCHNL_OFFSET_LOWER: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER; ++ break; ++ ++ default: ++ pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ break; ++ } ++ ++ //SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset); ++ } ++#endif ++ ++ //set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode); ++ ++#if 0 //move to rtw_update_ht_cap() ++ // ++ // Config SM Power Save setting ++ // ++ pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2; ++ if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC) ++ { ++ /*u8 i; ++ //update the MCS rates ++ for (i = 0; i < 16; i++) ++ { ++ pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i]; ++ }*/ ++ DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__); ++ } ++ ++ // ++ // Config current HT Protection mode. ++ // ++ pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3; ++#endif ++ ++} ++ ++void ERP_IE_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if(pIE->Length>1) ++ return; ++ ++ pmlmeinfo->ERP_enable = 1; ++ _rtw_memcpy(&(pmlmeinfo->ERP_IE), pIE->data, pIE->Length); ++} ++ ++void VCS_update(_adapter *padapter, struct sta_info *psta) ++{ ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ switch (pregpriv->vrtl_carrier_sense)/* 0:off 1:on 2:auto */ ++ { ++ case 0: //off ++ psta->rtsen = 0; ++ psta->cts2self = 0; ++ break; ++ ++ case 1: //on ++ if (pregpriv->vcs_type == 1) /* 1:RTS/CTS 2:CTS to self */ ++ { ++ psta->rtsen = 1; ++ psta->cts2self = 0; ++ } ++ else ++ { ++ psta->rtsen = 0; ++ psta->cts2self = 1; ++ } ++ break; ++ ++ case 2: //auto ++ default: ++ if ((pmlmeinfo->ERP_enable) && (pmlmeinfo->ERP_IE & BIT(1))) ++ { ++ if (pregpriv->vcs_type == 1) ++ { ++ psta->rtsen = 1; ++ psta->cts2self = 0; ++ } ++ else ++ { ++ psta->rtsen = 0; ++ psta->cts2self = 1; ++ } ++ } ++ else ++ { ++ psta->rtsen = 0; ++ psta->cts2self = 0; ++ } ++ break; ++ } ++} ++ ++#ifdef CONFIG_TDLS ++int check_ap_tdls_prohibited(u8 *pframe, u8 pkt_len) ++{ ++ u8 tdls_prohibited_bit = 0x40; //bit(38); TDLS_prohibited ++ ++ if(pkt_len < 5) ++ { ++ return _FALSE; ++ } ++ ++ pframe += 4; ++ if( (*pframe) & tdls_prohibited_bit ) ++ return _TRUE; ++ ++ return _FALSE; ++} ++#endif //CONFIG_TDLS ++ ++void update_beacon_info(_adapter *padapter, u8 *pframe, uint pkt_len, struct sta_info *psta) ++{ ++ unsigned int i; ++ unsigned int len; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ u8 tdls_prohibited[] = { 0x00, 0x00, 0x00, 0x00, 0x10 }; //bit(38): TDLS_prohibited ++#endif //CONFIG_TDLS ++ ++ len = pkt_len - (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN); ++ ++ for (i = 0; i < len;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN) + i); ++ ++ switch (pIE->ElementID) ++ { ++#if 0 ++ case _VENDOR_SPECIFIC_IE_: ++ //todo: to update WMM paramter set while receiving beacon ++ if (_rtw_memcmp(pIE->data, WMM_PARA_OUI, 6)) //WMM ++ { ++ (WMM_param_handler(padapter, pIE))? WMMOnAssocRsp(padapter): 0; ++ } ++ break; ++#endif ++ ++ case _HT_EXTRA_INFO_IE_: //HT info ++ //HT_info_handler(padapter, pIE); ++ bwmode_update_check(padapter, pIE); ++ break; ++ ++ case _ERPINFO_IE_: ++ ERP_IE_handler(padapter, pIE); ++ VCS_update(padapter, psta); ++ break; ++ ++#ifdef CONFIG_TDLS ++ case _EXT_CAP_IE_: ++ if( check_ap_tdls_prohibited(pIE->data, pIE->Length) == _TRUE ) ++ ptdlsinfo->ap_prohibited = _TRUE; ++ break; ++#endif //CONFIG_TDLS ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++} ++ ++#ifdef CONFIG_DFS ++void process_csa_ie(_adapter *padapter, u8 *pframe, uint pkt_len) ++{ ++ unsigned int i; ++ unsigned int len; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ u8 new_ch_no = 0; ++ ++ len = pkt_len - (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN); ++ ++ for (i = 0; i < len;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN) + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _CH_SWTICH_ANNOUNCE_: ++ _rtw_memcpy(&new_ch_no, pIE->data+1, 1); ++ rtw_set_csa_cmd(padapter, new_ch_no); ++ break; ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++} ++#endif //CONFIG_DFS ++ ++unsigned int is_ap_in_tkip(_adapter *padapter) ++{ ++ u32 i; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ ++ if (rtw_get_capability((WLAN_BSSID_EX *)cur_network) & WLAN_CAPABILITY_PRIVACY) ++ { ++ for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pmlmeinfo->network.IELength;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pmlmeinfo->network.IEs + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _VENDOR_SPECIFIC_IE_: ++ if ((_rtw_memcmp(pIE->data, RTW_WPA_OUI, 4)) && (_rtw_memcmp((pIE->data + 12), WPA_TKIP_CIPHER, 4))) ++ { ++ return _TRUE; ++ } ++ break; ++ ++ case _RSN_IE_2_: ++ if (_rtw_memcmp((pIE->data + 8), RSN_TKIP_CIPHER, 4)) ++ { ++ return _TRUE; ++ } ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ return _FALSE; ++ } ++ else ++ { ++ return _FALSE; ++ } ++ ++} ++ ++int wifirate2_ratetbl_inx(unsigned char rate); ++int wifirate2_ratetbl_inx(unsigned char rate) ++{ ++ int inx = 0; ++ rate = rate & 0x7f; ++ ++ switch (rate) ++ { ++ case 54*2: ++ inx = 11; ++ break; ++ ++ case 48*2: ++ inx = 10; ++ break; ++ ++ case 36*2: ++ inx = 9; ++ break; ++ ++ case 24*2: ++ inx = 8; ++ break; ++ ++ case 18*2: ++ inx = 7; ++ break; ++ ++ case 12*2: ++ inx = 6; ++ break; ++ ++ case 9*2: ++ inx = 5; ++ break; ++ ++ case 6*2: ++ inx = 4; ++ break; ++ ++ case 11*2: ++ inx = 3; ++ break; ++ case 11: ++ inx = 2; ++ break; ++ ++ case 2*2: ++ inx = 1; ++ break; ++ ++ case 1*2: ++ inx = 0; ++ break; ++ ++ } ++ return inx; ++} ++ ++unsigned int update_basic_rate(unsigned char *ptn, unsigned int ptn_sz) ++{ ++ unsigned int i, num_of_rate; ++ unsigned int mask = 0; ++ ++ num_of_rate = (ptn_sz > NumRates)? NumRates: ptn_sz; ++ ++ for (i = 0; i < num_of_rate; i++) ++ { ++ if ((*(ptn + i)) & 0x80) ++ { ++ mask |= 0x1 << wifirate2_ratetbl_inx(*(ptn + i)); ++ } ++ } ++ return mask; ++} ++ ++unsigned int update_supported_rate(unsigned char *ptn, unsigned int ptn_sz) ++{ ++ unsigned int i, num_of_rate; ++ unsigned int mask = 0; ++ ++ num_of_rate = (ptn_sz > NumRates)? NumRates: ptn_sz; ++ ++ for (i = 0; i < num_of_rate; i++) ++ { ++ mask |= 0x1 << wifirate2_ratetbl_inx(*(ptn + i)); ++ } ++ ++ return mask; ++} ++ ++unsigned int update_MSC_rate(struct HT_caps_element *pHT_caps) ++{ ++ unsigned int mask = 0; ++ ++ mask = ((pHT_caps->u.HT_cap_element.MCS_rate[0] << 12) | (pHT_caps->u.HT_cap_element.MCS_rate[1] << 20)); ++ ++ return mask; ++} ++ ++int support_short_GI(_adapter *padapter, struct HT_caps_element *pHT_caps) ++{ ++ unsigned char bit_offset; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if (!(pmlmeinfo->HT_enable)) ++ return _FAIL; ++ ++ if ((pmlmeinfo->assoc_AP_vendor == ralinkAP)) ++ return _FAIL; ++ ++ bit_offset = (pmlmeext->cur_bwmode & HT_CHANNEL_WIDTH_40)? 6: 5; ++ ++ if (pHT_caps->u.HT_cap_element.HT_caps_info & (0x1 << bit_offset)) ++ { ++ return _SUCCESS; ++ } ++ else ++ { ++ return _FAIL; ++ } ++} ++ ++unsigned char get_highest_rate_idx(u32 mask) ++{ ++ int i; ++ unsigned char rate_idx=0; ++ ++ for(i=27; i>=0; i--) ++ { ++ if(mask & BIT(i)) ++ { ++ rate_idx = i; ++ break; ++ } ++ } ++ ++ return rate_idx; ++} ++ ++unsigned char get_highest_mcs_rate(struct HT_caps_element *pHT_caps); ++unsigned char get_highest_mcs_rate(struct HT_caps_element *pHT_caps) ++{ ++ int i, mcs_rate; ++ ++ mcs_rate = (pHT_caps->u.HT_cap_element.MCS_rate[0] | (pHT_caps->u.HT_cap_element.MCS_rate[1] << 8)); ++ ++ for (i = 15; i >= 0; i--) ++ { ++ if (mcs_rate & (0x1 << i)) ++ { ++ break; ++ } ++ } ++ ++ return i; ++} ++ ++void Update_RA_Entry(_adapter *padapter, u32 mac_id) ++{ ++ rtw_hal_update_ra_mask(padapter, mac_id); ++} ++ ++void enable_rate_adaptive(_adapter *padapter, u32 mac_id); ++void enable_rate_adaptive(_adapter *padapter, u32 mac_id) ++{ ++ Update_RA_Entry(padapter, mac_id); ++} ++ ++void set_sta_rate(_adapter *padapter, struct sta_info *psta) ++{ ++ //rate adaptive ++ enable_rate_adaptive(padapter, psta->mac_id); ++} ++ ++// Update RRSR and Rate for USERATE ++void update_tx_basic_rate(_adapter *padapter, u8 wirelessmode) ++{ ++ NDIS_802_11_RATES_EX supported_rates; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++ ++ // Added by Albert 2011/03/22 ++ // In the P2P mode, the driver should not support the b mode. ++ // So, the Tx packet shouldn't use the CCK rate ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ return; ++#endif //CONFIG_P2P ++#ifdef CONFIG_INTEL_WIDI ++ if (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_NONE) ++ return; ++#endif //CONFIG_INTEL_WIDI ++ ++ _rtw_memset(supported_rates, 0, NDIS_802_11_LENGTH_RATES_EX); ++ ++ //clear B mod if current channel is in 5G band, avoid tx cck rate in 5G band. ++ if(pmlmeext->cur_channel > 14) ++ wirelessmode &= ~(WIRELESS_11B); ++ ++ if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B)) { ++ _rtw_memcpy(supported_rates, rtw_basic_rate_cck, 4); ++ } else if (wirelessmode & WIRELESS_11B) { ++ _rtw_memcpy(supported_rates, rtw_basic_rate_mix, 7); ++ } else { ++ _rtw_memcpy(supported_rates, rtw_basic_rate_ofdm, 3); ++ } ++ ++ if (wirelessmode & WIRELESS_11B) ++ update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB); ++ else ++ update_mgnt_tx_rate(padapter, IEEE80211_OFDM_RATE_6MB); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, supported_rates); ++} ++ ++unsigned char check_assoc_AP(u8 *pframe, uint len) ++{ ++ unsigned int i; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ ++ for (i = sizeof(NDIS_802_11_FIXED_IEs); i < len;) ++ { ++ pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + i); ++ ++ switch (pIE->ElementID) ++ { ++ case _VENDOR_SPECIFIC_IE_: ++ if ((_rtw_memcmp(pIE->data, ARTHEROS_OUI1, 3)) || (_rtw_memcmp(pIE->data, ARTHEROS_OUI2, 3))) ++ { ++ DBG_871X("link to Artheros AP\n"); ++ return atherosAP; ++ } ++ else if ((_rtw_memcmp(pIE->data, BROADCOM_OUI1, 3)) ++ || (_rtw_memcmp(pIE->data, BROADCOM_OUI2, 3)) ++ || (_rtw_memcmp(pIE->data, BROADCOM_OUI2, 3))) ++ { ++ DBG_871X("link to Broadcom AP\n"); ++ return broadcomAP; ++ } ++ else if (_rtw_memcmp(pIE->data, MARVELL_OUI, 3)) ++ { ++ DBG_871X("link to Marvell AP\n"); ++ return marvellAP; ++ } ++ else if (_rtw_memcmp(pIE->data, RALINK_OUI, 3)) ++ { ++ DBG_871X("link to Ralink AP\n"); ++ return ralinkAP; ++ } ++ else if (_rtw_memcmp(pIE->data, CISCO_OUI, 3)) ++ { ++ DBG_871X("link to Cisco AP\n"); ++ return ciscoAP; ++ } ++ else if (_rtw_memcmp(pIE->data, REALTEK_OUI, 3)) ++ { ++ DBG_871X("link to Realtek 96B\n"); ++ return realtekAP; ++ } ++ else if (_rtw_memcmp(pIE->data, AIRGOCAP_OUI,3)) ++ { ++ DBG_871X("link to Airgo Cap\n"); ++ return airgocapAP; ++ } ++ else ++ { ++ break; ++ } ++ ++ default: ++ break; ++ } ++ ++ i += (pIE->Length + 2); ++ } ++ ++ DBG_871X("link to new AP\n"); ++ return unknownAP; ++} ++ ++void update_IOT_info(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ switch (pmlmeinfo->assoc_AP_vendor) ++ { ++ case marvellAP: ++ pmlmeinfo->turboMode_cts2self = 1; ++ pmlmeinfo->turboMode_rtsen = 0; ++ break; ++ ++ case ralinkAP: ++ pmlmeinfo->turboMode_cts2self = 0; ++ pmlmeinfo->turboMode_rtsen = 1; ++ //disable high power ++ Switch_DM_Func(padapter, (~DYNAMIC_FUNC_HP), _FALSE); ++ break; ++ case realtekAP: ++ //rtw_write16(padapter, 0x4cc, 0xffff); ++ //rtw_write16(padapter, 0x546, 0x01c0); ++ //disable high power ++ Switch_DM_Func(padapter, (~DYNAMIC_FUNC_HP), _FALSE); ++ break; ++ default: ++ pmlmeinfo->turboMode_cts2self = 0; ++ pmlmeinfo->turboMode_rtsen = 1; ++ break; ++ } ++ ++} ++ ++void update_capinfo(PADAPTER Adapter, u16 updateCap) ++{ ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ BOOLEAN ShortPreamble; ++ ++ // Check preamble mode, 2005.01.06, by rcnjko. ++ // Mark to update preamble value forever, 2008.03.18 by lanhsin ++ //if( pMgntInfo->RegPreambleMode == PREAMBLE_AUTO ) ++ { ++ ++ if(updateCap & cShortPreamble) ++ { // Short Preamble ++ if(pmlmeinfo->preamble_mode != PREAMBLE_SHORT) // PREAMBLE_LONG or PREAMBLE_AUTO ++ { ++ ShortPreamble = _TRUE; ++ pmlmeinfo->preamble_mode = PREAMBLE_SHORT; ++ rtw_hal_set_hwreg( Adapter, HW_VAR_ACK_PREAMBLE, (u8 *)&ShortPreamble ); ++ } ++ } ++ else ++ { // Long Preamble ++ if(pmlmeinfo->preamble_mode != PREAMBLE_LONG) // PREAMBLE_SHORT or PREAMBLE_AUTO ++ { ++ ShortPreamble = _FALSE; ++ pmlmeinfo->preamble_mode = PREAMBLE_LONG; ++ rtw_hal_set_hwreg( Adapter, HW_VAR_ACK_PREAMBLE, (u8 *)&ShortPreamble ); ++ } ++ } ++ } ++ ++ if ( updateCap & cIBSS ) { ++ //Filen: See 802.11-2007 p.91 ++ pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME; ++ } ++ else ++ { ++ //Filen: See 802.11-2007 p.90 ++ if( pmlmeext->cur_wireless_mode & (WIRELESS_11G | WIRELESS_11_24N)) ++ { ++ if( (updateCap & cShortSlotTime) /* && (!(pMgntInfo->pHTInfo->RT2RT_HT_Mode & RT_HT_CAP_USE_LONG_PREAMBLE)) */) ++ { // Short Slot Time ++ if(pmlmeinfo->slotTime != SHORT_SLOT_TIME) ++ { ++ pmlmeinfo->slotTime = SHORT_SLOT_TIME; ++ } ++ } ++ else ++ { // Long Slot Time ++ if(pmlmeinfo->slotTime != NON_SHORT_SLOT_TIME) ++ { ++ pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME; ++ } ++ } ++ } ++ else if( pmlmeext->cur_wireless_mode & (WIRELESS_11A | WIRELESS_11_5N)) ++ { ++ pmlmeinfo->slotTime = SHORT_SLOT_TIME; ++ } ++ else ++ { ++ //B Mode ++ pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME; ++ } ++ } ++ ++ rtw_hal_set_hwreg( Adapter, HW_VAR_SLOT_TIME, &pmlmeinfo->slotTime ); ++ ++} ++ ++void update_wireless_mode(_adapter *padapter) ++{ ++ u8 init_rate=0; ++ int ratelen, network_type = 0; ++ u32 SIFS_Timer, mask; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ unsigned char *rate = cur_network->SupportedRates; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++#endif //CONFIG_CONCURRENT_MODE ++ ++ ratelen = rtw_get_rateset_len(cur_network->SupportedRates); ++ ++ if ((pmlmeinfo->HT_info_enable) && (pmlmeinfo->HT_caps_enable)) ++ { ++ pmlmeinfo->HT_enable = 1; ++ } ++ ++ if(pmlmeext->cur_channel > 14) ++ { ++ if (pmlmeinfo->HT_enable) ++ { ++ network_type = WIRELESS_11_5N; ++ } ++ ++ network_type |= WIRELESS_11A; ++ } ++ else ++ { ++ if (pmlmeinfo->HT_enable) ++ { ++ network_type = WIRELESS_11_24N; ++ } ++ ++ if ((cckratesonly_included(rate, ratelen)) == _TRUE) ++ { ++ network_type |= WIRELESS_11B; ++ } ++ else if((cckrates_included(rate, ratelen)) == _TRUE) ++ { ++ network_type |= WIRELESS_11BG; ++ } ++ else ++ { ++ network_type |= WIRELESS_11G; ++ } ++ } ++ ++ pmlmeext->cur_wireless_mode = network_type & padapter->registrypriv.wireless_mode; ++ ++ //For STA mode, driver need to modify initial data rate, or MAC will use wrong tx rate. ++ //Modified by Thomas 2012-12-3 ++ mask = update_supported_rate(cur_network->SupportedRates, ratelen); ++ init_rate = get_highest_rate_idx(mask)&0x3f; ++ rtw_hal_set_hwreg( padapter, HW_VAR_INIT_DATA_RATE, (u8 *)&init_rate); ++ ++/* ++ if((pmlmeext->cur_wireless_mode==WIRELESS_11G) || ++ (pmlmeext->cur_wireless_mode==WIRELESS_11BG))//WIRELESS_MODE_G) ++ SIFS_Timer = 0x0a0a;//CCK ++ else ++ SIFS_Timer = 0x0e0e;//pHalData->SifsTime; //OFDM ++*/ ++ ++ SIFS_Timer = 0x0a0a0808; //0x0808 -> for CCK, 0x0a0a -> for OFDM ++ //change this value if having IOT issues. ++ ++ rtw_hal_set_hwreg( padapter, HW_VAR_RESP_SIFS, (u8 *)&SIFS_Timer); ++ ++ if (pmlmeext->cur_wireless_mode & WIRELESS_11B) ++ update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB); ++ else ++ { ++ update_mgnt_tx_rate(padapter, IEEE80211_OFDM_RATE_6MB); ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_adapter && (pmlmeext->cur_wireless_mode & WIRELESS_11A)) ++ update_mgnt_tx_rate(pbuddy_adapter, IEEE80211_OFDM_RATE_6MB); ++#endif //CONFIG_CONCURRENT_MODE ++ } ++} ++ ++void fire_write_MAC_cmd(_adapter *padapter, unsigned int addr, unsigned int value); ++void fire_write_MAC_cmd(_adapter *padapter, unsigned int addr, unsigned int value) ++{ ++#if 0 ++ struct cmd_obj *ph2c; ++ struct reg_rw_parm *pwriteMacPara; ++ struct cmd_priv *pcmdpriv = &(padapter->cmdpriv); ++ ++ if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL) ++ { ++ return; ++ } ++ ++ if ((pwriteMacPara = (struct reg_rw_parm*)rtw_malloc(sizeof(struct reg_rw_parm))) == NULL) ++ { ++ rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj)); ++ return; ++ } ++ ++ pwriteMacPara->rw = 1; ++ pwriteMacPara->addr = addr; ++ pwriteMacPara->value = value; ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, pwriteMacPara, GEN_CMD_CODE(_Write_MACREG)); ++ rtw_enqueue_cmd(pcmdpriv, ph2c); ++#endif ++} ++ ++void update_bmc_sta_support_rate(_adapter *padapter, u32 mac_id) ++{ ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if(pmlmeext->cur_wireless_mode & WIRELESS_11B) ++ { ++ // Only B, B/G, and B/G/N AP could use CCK rate ++ _rtw_memcpy((pmlmeinfo->FW_sta_info[mac_id].SupportedRates), rtw_basic_rate_cck, 4); ++ } ++ else ++ { ++ _rtw_memcpy((pmlmeinfo->FW_sta_info[mac_id].SupportedRates), rtw_basic_rate_ofdm, 3); ++ } ++} ++ ++int update_sta_support_rate(_adapter *padapter, u8* pvar_ie, uint var_ie_len, int cam_idx) ++{ ++ unsigned int ie_len; ++ PNDIS_802_11_VARIABLE_IEs pIE; ++ int supportRateNum = 0; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ pIE = (PNDIS_802_11_VARIABLE_IEs)rtw_get_ie(pvar_ie, _SUPPORTEDRATES_IE_, &ie_len, var_ie_len); ++ if (pIE == NULL) ++ { ++ return _FAIL; ++ } ++ ++ _rtw_memcpy(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates, pIE->data, ie_len); ++ supportRateNum = ie_len; ++ ++ pIE = (PNDIS_802_11_VARIABLE_IEs)rtw_get_ie(pvar_ie, _EXT_SUPPORTEDRATES_IE_, &ie_len, var_ie_len); ++ if (pIE) ++ { ++ _rtw_memcpy((pmlmeinfo->FW_sta_info[cam_idx].SupportedRates + supportRateNum), pIE->data, ie_len); ++ } ++ ++ return _SUCCESS; ++ ++} ++ ++void process_addba_req(_adapter *padapter, u8 *paddba_req, u8 *addr) ++{ ++ struct sta_info *psta; ++ u16 tid, start_seq, param; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct ADDBA_request *preq = (struct ADDBA_request*)paddba_req; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ psta = rtw_get_stainfo(pstapriv, addr); ++ ++ if(psta) ++ { ++ start_seq = le16_to_cpu(preq->BA_starting_seqctrl) >> 4; ++ ++ param = le16_to_cpu(preq->BA_para_set); ++ tid = (param>>2)&0x0f; ++ ++ preorder_ctrl = &psta->recvreorder_ctrl[tid]; ++ ++ #ifdef CONFIG_UPDATE_INDICATE_SEQ_WHILE_PROCESS_ADDBA_REQ ++ preorder_ctrl->indicate_seq = start_seq; ++ #ifdef DBG_RX_SEQ ++ DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, start_seq: %d\n", __FUNCTION__, __LINE__, ++ preorder_ctrl->indicate_seq, start_seq); ++ #endif ++ #else ++ preorder_ctrl->indicate_seq = 0xffff; ++ #endif ++ ++ preorder_ctrl->enable =(pmlmeinfo->bAcceptAddbaReq == _TRUE)? _TRUE :_FALSE; ++ } ++ ++} ++ ++void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len) ++{ ++ u8* pIE; ++ u32 *pbuf; ++ ++ pIE = pframe + sizeof(struct rtw_ieee80211_hdr_3addr); ++ pbuf = (u32*)pIE; ++ ++ pmlmeext->TSFValue = le32_to_cpu(*(pbuf+1)); ++ ++ pmlmeext->TSFValue = pmlmeext->TSFValue << 32; ++ ++ pmlmeext->TSFValue |= le32_to_cpu(*pbuf); ++} ++ ++void correct_TSF(_adapter *padapter, struct mlme_ext_priv *pmlmeext) ++{ ++ rtw_hal_set_hwreg(padapter, HW_VAR_CORRECT_TSF, 0); ++} ++ ++void beacon_timing_control(_adapter *padapter) ++{ ++ rtw_hal_bcn_related_reg_setting(padapter); ++} ++ ++#if 0 ++unsigned int setup_beacon_frame(_adapter *padapter, unsigned char *beacon_frame) ++{ ++ unsigned short ATIMWindow; ++ unsigned char *pframe; ++ struct tx_desc *ptxdesc; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ unsigned int rate_len, len = 0; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ _rtw_memset(beacon_frame, 0, 256); ++ ++ pframe = beacon_frame + TXDESC_SIZE; ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN); ++ ++ SetFrameSubType(pframe, WIFI_BEACON); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ len = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //timestamp will be inserted by hardware ++ pframe += 8; ++ len += 8; ++ ++ // beacon interval: 2 bytes ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ len += 2; ++ ++ // capability info: 2 bytes ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ len += 2; ++ ++ // SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &len); ++ ++ // supported rates... ++ rate_len = rtw_get_rateset_len(cur_network->SupportedRates); ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &len); ++ ++ // DS parameter set ++ pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &len); ++ ++ // IBSS Parameter Set... ++ //ATIMWindow = cur->Configuration.ATIMWindow; ++ ATIMWindow = 0; ++ pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &len); ++ ++ //todo: ERP IE ++ ++ // EXTERNDED SUPPORTED RATE ++ if (rate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &len); ++ } ++ ++ if ((len + TXDESC_SIZE) > 256) ++ { ++ //DBG_871X("marc: beacon frame too large\n"); ++ return 0; ++ } ++ ++ //fill the tx descriptor ++ ptxdesc = (struct tx_desc *)beacon_frame; ++ ++ //offset 0 ++ ptxdesc->txdw0 |= cpu_to_le32(len & 0x0000ffff); ++ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00ff0000); //default = 32 bytes for TX Desc ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32((0x10 << QSEL_SHT) & 0x00001f00); ++ ++ //offset 8 ++ ptxdesc->txdw2 |= cpu_to_le32(BMC); ++ ptxdesc->txdw2 |= cpu_to_le32(BK); ++ ++ //offset 16 ++ ptxdesc->txdw4 = 0x80000000; ++ ++ //offset 20 ++ ptxdesc->txdw5 = 0x00000000; //1M ++ ++ return (len + TXDESC_SIZE); ++} ++#endif ++ ++static _adapter *pbuddy_padapter = NULL; ++ ++int rtw_handle_dualmac(_adapter *adapter, bool init) ++{ ++ int status = _SUCCESS; ++ struct dvobj_priv *dvobj = adapter_to_dvobj(adapter); ++ ++ if (!IS_HARDWARE_TYPE_8192D(adapter)) ++ goto exit; ++ ++ if (init) { ++ rtw_hal_get_def_var(adapter, HAL_DEF_DUAL_MAC_MODE, &dvobj->DualMacMode); ++ if (dvobj->DualMacMode == _TRUE) { ++ // temply disable IPS For 92D-VC ++ adapter->registrypriv.ips_mode = IPS_NONE; ++ } ++ ++ /* For SMSP on 92DU-VC, driver do not probe another Interface. */ ++ if ((dvobj->DualMacMode != _TRUE) && (dvobj->InterfaceNumber != 0)) { ++ DBG_871X("%s(): Do not init another Interface because SMSP\n",__FUNCTION__); ++ status = _FAIL; ++ goto exit; ++ } ++ ++#ifndef CONFIG_CONCURRENT_MODE ++ if (dvobj->DualMacMode == _TRUE) { ++ if (pbuddy_padapter == NULL) { ++ pbuddy_padapter = adapter; ++ DBG_871X("%s(): pbuddy_padapter == NULL, Set pbuddy_padapter\n",__FUNCTION__); ++ } else { ++ adapter->pbuddy_adapter = pbuddy_padapter; ++ pbuddy_padapter->pbuddy_adapter = adapter; ++ // clear global value ++ pbuddy_padapter = NULL; ++ DBG_871X("%s(): pbuddy_padapter exist, Exchange Information\n",__FUNCTION__); ++ } ++ } ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ if (dvobj->InterfaceNumber == 0) { ++ //set adapter_type/iface type ++ adapter->isprimary = _TRUE; ++ adapter->adapter_type = PRIMARY_ADAPTER; ++ adapter->iface_type = IFACE_PORT0; ++ DBG_871X("%s(): PRIMARY_ADAPTER\n",__FUNCTION__); ++ } else { ++ //set adapter_type/iface type ++ adapter->isprimary = _FALSE; ++ adapter->adapter_type = SECONDARY_ADAPTER; ++ adapter->iface_type = IFACE_PORT1; ++ DBG_871X("%s(): SECONDARY_ADAPTER\n",__FUNCTION__); ++ } ++#endif ++#endif ++ }else { ++ pbuddy_padapter = NULL; ++ } ++exit: ++ return status; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c +new file mode 100644 +index 000000000000..fb4e6981f4ff +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c +@@ -0,0 +1,4155 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTW_XMIT_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++#error "Shall be Linux or Windows, but not both!\n" ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++#include ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++ ++static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 }; ++static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 }; ++ ++static void _init_txservq(struct tx_servq *ptxservq) ++{ ++_func_enter_; ++ _rtw_init_listhead(&ptxservq->tx_pending); ++ _rtw_init_queue(&ptxservq->sta_pending); ++ ptxservq->qcnt = 0; ++_func_exit_; ++} ++ ++ ++void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv) ++{ ++ ++_func_enter_; ++ ++ _rtw_memset((unsigned char *)psta_xmitpriv, 0, sizeof (struct sta_xmit_priv)); ++ ++ _rtw_spinlock_init(&psta_xmitpriv->lock); ++ ++ //for(i = 0 ; i < MAX_NUMBLKS; i++) ++ // _init_txservq(&(psta_xmitpriv->blk_q[i])); ++ ++ _init_txservq(&psta_xmitpriv->be_q); ++ _init_txservq(&psta_xmitpriv->bk_q); ++ _init_txservq(&psta_xmitpriv->vi_q); ++ _init_txservq(&psta_xmitpriv->vo_q); ++ _rtw_init_listhead(&psta_xmitpriv->legacy_dz); ++ _rtw_init_listhead(&psta_xmitpriv->apsd); ++ ++_func_exit_; ++ ++} ++ ++s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, _adapter *padapter) ++{ ++ int i; ++ struct xmit_buf *pxmitbuf; ++ struct xmit_frame *pxframe; ++ sint res=_SUCCESS; ++ ++_func_enter_; ++ ++ // We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc(). ++ //_rtw_memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv)); ++ ++ _rtw_spinlock_init(&pxmitpriv->lock); ++ _rtw_spinlock_init(&pxmitpriv->lock_sctx); ++ _rtw_init_sema(&pxmitpriv->xmit_sema, 0); ++ _rtw_init_sema(&pxmitpriv->terminate_xmitthread_sema, 0); ++ ++ /* ++ Please insert all the queue initializaiton using _rtw_init_queue below ++ */ ++ ++ pxmitpriv->adapter = padapter; ++ ++ //for(i = 0 ; i < MAX_NUMBLKS; i++) ++ // _rtw_init_queue(&pxmitpriv->blk_strms[i]); ++ ++ _rtw_init_queue(&pxmitpriv->be_pending); ++ _rtw_init_queue(&pxmitpriv->bk_pending); ++ _rtw_init_queue(&pxmitpriv->vi_pending); ++ _rtw_init_queue(&pxmitpriv->vo_pending); ++ _rtw_init_queue(&pxmitpriv->bm_pending); ++ ++ //_rtw_init_queue(&pxmitpriv->legacy_dz_queue); ++ //_rtw_init_queue(&pxmitpriv->apsd_queue); ++ ++ _rtw_init_queue(&pxmitpriv->free_xmit_queue); ++ ++ /* ++ Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME, ++ and initialize free_xmit_frame below. ++ Please also apply free_txobj to link_up all the xmit_frames... ++ */ ++ ++ pxmitpriv->pallocated_frame_buf = rtw_zvmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4); ++ ++ if (pxmitpriv->pallocated_frame_buf == NULL){ ++ pxmitpriv->pxmit_frame_buf =NULL; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_frame fail!\n")); ++ res= _FAIL; ++ goto exit; ++ } ++ pxmitpriv->pxmit_frame_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_frame_buf), 4); ++ //pxmitpriv->pxmit_frame_buf = pxmitpriv->pallocated_frame_buf + 4 - ++ // ((SIZE_PTR) (pxmitpriv->pallocated_frame_buf) &3); ++ ++ pxframe = (struct xmit_frame*) pxmitpriv->pxmit_frame_buf; ++ ++ for (i = 0; i < NR_XMITFRAME; i++) ++ { ++ _rtw_init_listhead(&(pxframe->list)); ++ ++ pxframe->padapter = padapter; ++ pxframe->frame_tag = NULL_FRAMETAG; ++ ++ pxframe->pkt = NULL; ++ ++ pxframe->buf_addr = NULL; ++ pxframe->pxmitbuf = NULL; ++ ++ rtw_list_insert_tail(&(pxframe->list), &(pxmitpriv->free_xmit_queue.queue)); ++ ++ pxframe++; ++ } ++ ++ pxmitpriv->free_xmitframe_cnt = NR_XMITFRAME; ++ ++ pxmitpriv->frag_len = MAX_FRAG_THRESHOLD; ++ ++ ++ //init xmit_buf ++ _rtw_init_queue(&pxmitpriv->free_xmitbuf_queue); ++ _rtw_init_queue(&pxmitpriv->pending_xmitbuf_queue); ++ ++ pxmitpriv->pallocated_xmitbuf = rtw_zvmalloc(NR_XMITBUFF * sizeof(struct xmit_buf) + 4); ++ ++ if (pxmitpriv->pallocated_xmitbuf == NULL){ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_buf fail!\n")); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pxmitpriv->pxmitbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_xmitbuf), 4); ++ //pxmitpriv->pxmitbuf = pxmitpriv->pallocated_xmitbuf + 4 - ++ // ((SIZE_PTR) (pxmitpriv->pallocated_xmitbuf) &3); ++ ++ pxmitbuf = (struct xmit_buf*)pxmitpriv->pxmitbuf; ++ ++ for (i = 0; i < NR_XMITBUFF; i++) ++ { ++ _rtw_init_listhead(&pxmitbuf->list); ++ ++ pxmitbuf->priv_data = NULL; ++ pxmitbuf->padapter = padapter; ++ pxmitbuf->ext_tag = _FALSE; ++ ++/* ++ pxmitbuf->pallocated_buf = rtw_zmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ); ++ if (pxmitbuf->pallocated_buf == NULL) ++ { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ); ++ //pxmitbuf->pbuf = pxmitbuf->pallocated_buf + XMITBUF_ALIGN_SZ -((SIZE_PTR) (pxmitbuf->pallocated_buf) &(XMITBUF_ALIGN_SZ-1)); ++*/ ++ ++ if((res=rtw_os_xmit_resource_alloc(padapter, pxmitbuf,(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ))) == _FAIL) { ++ res= _FAIL; ++ goto exit; ++ } ++ ++#ifdef CONFIG_SDIO_HCI ++ pxmitbuf->phead = pxmitbuf->pbuf; ++ pxmitbuf->pend = pxmitbuf->pbuf + MAX_XMITBUF_SZ; ++ pxmitbuf->len = 0; ++ pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead; ++#endif ++ ++ pxmitbuf->flags = XMIT_VO_QUEUE; ++ ++ rtw_list_insert_tail(&pxmitbuf->list, &(pxmitpriv->free_xmitbuf_queue.queue)); ++ #ifdef DBG_XMIT_BUF ++ pxmitbuf->no=i; ++ #endif ++ ++ pxmitbuf++; ++ ++ } ++ ++ pxmitpriv->free_xmitbuf_cnt = NR_XMITBUFF; ++ ++ /* init xframe_ext queue, the same count as extbuf */ ++ _rtw_init_queue(&pxmitpriv->free_xframe_ext_queue); ++ ++ pxmitpriv->xframe_ext_alloc_addr = rtw_zvmalloc(NR_XMIT_EXTBUFF * sizeof(struct xmit_frame) + 4); ++ ++ if (pxmitpriv->xframe_ext_alloc_addr == NULL){ ++ pxmitpriv->xframe_ext = NULL; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xframe_ext fail!\n")); ++ res= _FAIL; ++ goto exit; ++ } ++ pxmitpriv->xframe_ext = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->xframe_ext_alloc_addr), 4); ++ pxframe = (struct xmit_frame*)pxmitpriv->xframe_ext; ++ ++ for (i = 0; i < NR_XMIT_EXTBUFF; i++) { ++ _rtw_init_listhead(&(pxframe->list)); ++ ++ pxframe->padapter = padapter; ++ pxframe->frame_tag = NULL_FRAMETAG; ++ ++ pxframe->pkt = NULL; ++ ++ pxframe->buf_addr = NULL; ++ pxframe->pxmitbuf = NULL; ++ ++ pxframe->ext_tag = 1; ++ ++ rtw_list_insert_tail(&(pxframe->list), &(pxmitpriv->free_xframe_ext_queue.queue)); ++ ++ pxframe++; ++ } ++ pxmitpriv->free_xframe_ext_cnt = NR_XMIT_EXTBUFF; ++ ++ // Init xmit extension buff ++ _rtw_init_queue(&pxmitpriv->free_xmit_extbuf_queue); ++ ++ pxmitpriv->pallocated_xmit_extbuf = rtw_zvmalloc(NR_XMIT_EXTBUFF * sizeof(struct xmit_buf) + 4); ++ ++ if (pxmitpriv->pallocated_xmit_extbuf == NULL){ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_extbuf fail!\n")); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ pxmitpriv->pxmit_extbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_xmit_extbuf), 4); ++ ++ pxmitbuf = (struct xmit_buf*)pxmitpriv->pxmit_extbuf; ++ ++ for (i = 0; i < NR_XMIT_EXTBUFF; i++) ++ { ++ _rtw_init_listhead(&pxmitbuf->list); ++ ++ pxmitbuf->priv_data = NULL; ++ pxmitbuf->padapter = padapter; ++ pxmitbuf->ext_tag = _TRUE; ++ ++/* ++ pxmitbuf->pallocated_buf = rtw_zmalloc(MAX_XMIT_EXTBUF_SZ); ++ if (pxmitbuf->pallocated_buf == NULL) ++ { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), 4); ++*/ ++ ++ if((res=rtw_os_xmit_resource_alloc(padapter, pxmitbuf,MAX_XMIT_EXTBUF_SZ + XMITBUF_ALIGN_SZ)) == _FAIL) { ++ res= _FAIL; ++ goto exit; ++ } ++ ++#ifdef CONFIG_SDIO_HCI ++ pxmitbuf->phead = pxmitbuf->pbuf; ++ pxmitbuf->pend = pxmitbuf->pbuf + MAX_XMIT_EXTBUF_SZ; ++ pxmitbuf->len = 0; ++ pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead; ++#endif ++ ++ rtw_list_insert_tail(&pxmitbuf->list, &(pxmitpriv->free_xmit_extbuf_queue.queue)); ++ #ifdef DBG_XMIT_BUF ++ pxmitbuf->no=i; ++ #endif ++ pxmitbuf++; ++ ++ } ++ ++ pxmitpriv->free_xmit_extbuf_cnt = NR_XMIT_EXTBUFF; ++ ++ rtw_alloc_hwxmits(padapter); ++ rtw_init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry); ++ ++#ifdef CONFIG_USB_HCI ++ pxmitpriv->txirp_cnt=1; ++ ++ _rtw_init_sema(&(pxmitpriv->tx_retevt), 0); ++ ++ //per AC pending irp ++ pxmitpriv->beq_cnt = 0; ++ pxmitpriv->bkq_cnt = 0; ++ pxmitpriv->viq_cnt = 0; ++ pxmitpriv->voq_cnt = 0; ++#endif ++ ++ ++#ifdef CONFIG_XMIT_ACK ++ pxmitpriv->ack_tx = _FALSE; ++ _rtw_mutex_init(&pxmitpriv->ack_tx_mutex); ++ rtw_sctx_init(&pxmitpriv->ack_tx_ops, 0); ++#endif ++ ++ rtw_hal_init_xmit_priv(padapter); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++void rtw_mfree_xmit_priv_lock (struct xmit_priv *pxmitpriv); ++void rtw_mfree_xmit_priv_lock (struct xmit_priv *pxmitpriv) ++{ ++ _rtw_spinlock_free(&pxmitpriv->lock); ++ _rtw_free_sema(&pxmitpriv->xmit_sema); ++ _rtw_free_sema(&pxmitpriv->terminate_xmitthread_sema); ++ ++ _rtw_spinlock_free(&pxmitpriv->be_pending.lock); ++ _rtw_spinlock_free(&pxmitpriv->bk_pending.lock); ++ _rtw_spinlock_free(&pxmitpriv->vi_pending.lock); ++ _rtw_spinlock_free(&pxmitpriv->vo_pending.lock); ++ _rtw_spinlock_free(&pxmitpriv->bm_pending.lock); ++ ++ //_rtw_spinlock_free(&pxmitpriv->legacy_dz_queue.lock); ++ //_rtw_spinlock_free(&pxmitpriv->apsd_queue.lock); ++ ++ _rtw_spinlock_free(&pxmitpriv->free_xmit_queue.lock); ++ _rtw_spinlock_free(&pxmitpriv->free_xmitbuf_queue.lock); ++ _rtw_spinlock_free(&pxmitpriv->pending_xmitbuf_queue.lock); ++} ++ ++ ++void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv) ++{ ++ int i; ++ _adapter *padapter = pxmitpriv->adapter; ++ struct xmit_frame *pxmitframe = (struct xmit_frame*) pxmitpriv->pxmit_frame_buf; ++ struct xmit_buf *pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmitbuf; ++ ++ _func_enter_; ++ ++ rtw_hal_free_xmit_priv(padapter); ++ ++ rtw_mfree_xmit_priv_lock(pxmitpriv); ++ ++ if(pxmitpriv->pxmit_frame_buf==NULL) ++ goto out; ++ ++ for(i=0; ipallocated_buf) ++ // rtw_mfree(pxmitbuf->pallocated_buf, MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ); ++ ++ pxmitbuf++; ++ } ++ ++ if(pxmitpriv->pallocated_frame_buf) { ++ rtw_vmfree(pxmitpriv->pallocated_frame_buf, NR_XMITFRAME * sizeof(struct xmit_frame) + 4); ++ } ++ ++ ++ if(pxmitpriv->pallocated_xmitbuf) { ++ rtw_vmfree(pxmitpriv->pallocated_xmitbuf, NR_XMITBUFF * sizeof(struct xmit_buf) + 4); ++ } ++ ++ /* free xframe_ext queue, the same count as extbuf */ ++ if ((pxmitframe = (struct xmit_frame*)pxmitpriv->xframe_ext)) { ++ for (i=0; ixframe_ext_alloc_addr) ++ rtw_vmfree(pxmitpriv->xframe_ext_alloc_addr, NR_XMIT_EXTBUFF * sizeof(struct xmit_frame) + 4); ++ _rtw_spinlock_free(&pxmitpriv->free_xframe_ext_queue.lock); ++ ++ // free xmit extension buff ++ _rtw_spinlock_free(&pxmitpriv->free_xmit_extbuf_queue.lock); ++ ++ pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmit_extbuf; ++ for(i=0; ipallocated_buf) ++ // rtw_mfree(pxmitbuf->pallocated_buf, MAX_XMIT_EXTBUF_SZ); ++ ++ pxmitbuf++; ++ } ++ ++ if(pxmitpriv->pallocated_xmit_extbuf) { ++ rtw_vmfree(pxmitpriv->pallocated_xmit_extbuf, NR_XMIT_EXTBUFF * sizeof(struct xmit_buf) + 4); ++ } ++ ++ rtw_free_hwxmits(padapter); ++ ++#ifdef CONFIG_XMIT_ACK ++ _rtw_mutex_free(&pxmitpriv->ack_tx_mutex); ++#endif ++ ++out: ++ ++_func_exit_; ++ ++} ++ ++static void update_attrib_vcs_info(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ u32 sz; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct sta_info *psta = pattrib->psta; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ if(pattrib->psta) ++ { ++ psta = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] ); ++ } ++ ++ if(psta==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return; ++ } ++ ++ if (pattrib->nr_frags != 1) ++ { ++ sz = padapter->xmitpriv.frag_len; ++ } ++ else //no frag ++ { ++ sz = pattrib->last_txcmdsz; ++ } ++ ++ // (1) RTS_Threshold is compared to the MPDU, not MSDU. ++ // (2) If there are more than one frag in this MSDU, only the first frag uses protection frame. ++ // Other fragments are protected by previous fragment. ++ // So we only need to check the length of first fragment. ++ if(pmlmeext->cur_wireless_mode < WIRELESS_11_24N || padapter->registrypriv.wifi_spec) ++ { ++ if(sz > padapter->registrypriv.rts_thresh) ++ { ++ pattrib->vcs_mode = RTS_CTS; ++ } ++ else ++ { ++ if(psta->rtsen) ++ pattrib->vcs_mode = RTS_CTS; ++ else if(psta->cts2self) ++ pattrib->vcs_mode = CTS_TO_SELF; ++ else ++ pattrib->vcs_mode = NONE_VCS; ++ } ++ } ++ else ++ { ++ while (_TRUE) ++ { ++#if 0 //Todo ++ //check IOT action ++ if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) ++ { ++ pattrib->vcs_mode = CTS_TO_SELF; ++ pattrib->rts_rate = MGN_24M; ++ break; ++ } ++ else if(pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_PURE_N_MODE)) ++ { ++ pattrib->vcs_mode = RTS_CTS; ++ pattrib->rts_rate = MGN_24M; ++ break; ++ } ++#endif ++ ++ //IOT action ++ if((pmlmeinfo->assoc_AP_vendor == atherosAP) && (pattrib->ampdu_en==_TRUE) && ++ (padapter->securitypriv.dot11PrivacyAlgrthm == _AES_ )) ++ { ++ pattrib->vcs_mode = CTS_TO_SELF; ++ break; ++ } ++ ++ ++ //check ERP protection ++ if(psta->rtsen || psta->cts2self) ++ { ++ if(psta->rtsen) ++ pattrib->vcs_mode = RTS_CTS; ++ else if(psta->cts2self) ++ pattrib->vcs_mode = CTS_TO_SELF; ++ ++ break; ++ } ++ ++ //check HT op mode ++ if(pattrib->ht_en) ++ { ++ u8 HTOpMode = pmlmeinfo->HT_protection; ++ if((pmlmeext->cur_bwmode && (HTOpMode == 2 || HTOpMode == 3)) || ++ (!pmlmeext->cur_bwmode && HTOpMode == 3) ) ++ { ++ pattrib->vcs_mode = RTS_CTS; ++ break; ++ } ++ } ++ ++ //check rts ++ if(sz > padapter->registrypriv.rts_thresh) ++ { ++ pattrib->vcs_mode = RTS_CTS; ++ break; ++ } ++ ++ //to do list: check MIMO power save condition. ++ ++ //check AMPDU aggregation for TXOP ++ if(pattrib->ampdu_en==_TRUE) ++ { ++ pattrib->vcs_mode = RTS_CTS; ++ break; ++ } ++ ++ pattrib->vcs_mode = NONE_VCS; ++ break; ++ } ++ } ++} ++ ++static void update_attrib_phy_info(struct pkt_attrib *pattrib, struct sta_info *psta) ++{ ++ /*if(psta->rtsen) ++ pattrib->vcs_mode = RTS_CTS; ++ else if(psta->cts2self) ++ pattrib->vcs_mode = CTS_TO_SELF; ++ else ++ pattrib->vcs_mode = NONE_VCS;*/ ++ ++ pattrib->mdata = 0; ++ pattrib->eosp = 0; ++ pattrib->triggered=0; ++ ++ //qos_en, ht_en, init rate, ,bw, ch_offset, sgi ++ pattrib->qos_en = psta->qos_option; ++ pattrib->ht_en = psta->htpriv.ht_option; ++ pattrib->raid = psta->raid; ++ pattrib->bwmode = psta->htpriv.bwmode; ++ pattrib->ch_offset = psta->htpriv.ch_offset; ++ pattrib->sgi= psta->htpriv.sgi; ++ pattrib->ampdu_en = _FALSE; ++ ++ //if(pattrib->ht_en && psta->htpriv.ampdu_enable) ++ //{ ++ // if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority)) ++ // pattrib->ampdu_en = _TRUE; ++ //} ++ ++ ++ pattrib->retry_ctrl = _FALSE; ++ ++} ++ ++u8 qos_acm(u8 acm_mask, u8 priority) ++{ ++ u8 change_priority = priority; ++ ++ switch (priority) ++ { ++ case 0: ++ case 3: ++ if(acm_mask & BIT(1)) ++ change_priority = 1; ++ break; ++ case 1: ++ case 2: ++ break; ++ case 4: ++ case 5: ++ if(acm_mask & BIT(2)) ++ change_priority = 0; ++ break; ++ case 6: ++ case 7: ++ if(acm_mask & BIT(3)) ++ change_priority = 5; ++ break; ++ default: ++ DBG_871X("qos_acm(): invalid pattrib->priority: %d!!!\n", priority); ++ break; ++ } ++ ++ return change_priority; ++} ++ ++static void set_qos(struct pkt_file *ppktfile, struct pkt_attrib *pattrib) ++{ ++ struct ethhdr etherhdr; ++ struct iphdr ip_hdr; ++ s32 UserPriority = 0; ++ ++ ++ _rtw_open_pktfile(ppktfile->pkt, ppktfile); ++ _rtw_pktfile_read(ppktfile, (unsigned char*)ðerhdr, ETH_HLEN); ++ ++ // get UserPriority from IP hdr ++ if (pattrib->ether_type == 0x0800) { ++ _rtw_pktfile_read(ppktfile, (u8*)&ip_hdr, sizeof(ip_hdr)); ++// UserPriority = (ntohs(ip_hdr.tos) >> 5) & 0x3; ++ UserPriority = ip_hdr.tos >> 5; ++ } else if (pattrib->ether_type == 0x888e) { ++ // "When priority processing of data frames is supported, ++ // a STA's SME should send EAPOL-Key frames at the highest priority." ++ UserPriority = 7; ++ } ++ ++ pattrib->priority = UserPriority; ++ pattrib->hdrlen = WLAN_HDR_A3_QOS_LEN; ++ pattrib->subtype = WIFI_QOS_DATA_TYPE; ++} ++ ++static s32 update_attrib(_adapter *padapter, _pkt *pkt, struct pkt_attrib *pattrib) ++{ ++ uint i; ++ struct pkt_file pktfile; ++ struct sta_info *psta = NULL; ++ struct ethhdr etherhdr; ++ ++ sint bmcast; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv= &pmlmepriv->qospriv; ++ sint res = _SUCCESS; ++ ++ _func_enter_; ++ ++ _rtw_open_pktfile(pkt, &pktfile); ++ i = _rtw_pktfile_read(&pktfile, (u8*)ðerhdr, ETH_HLEN); ++ ++ pattrib->ether_type = ntohs(etherhdr.h_proto); ++ ++ ++ _rtw_memcpy(pattrib->dst, ðerhdr.h_dest, ETH_ALEN); ++ _rtw_memcpy(pattrib->src, ðerhdr.h_source, ETH_ALEN); ++ ++ pattrib->pctrl = 0; ++ ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) { ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ } ++ else if (check_fwstate(pmlmepriv, WIFI_STATION_STATE)) { ++ _rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ } ++ else if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) { ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, get_bssid(pmlmepriv), ETH_ALEN); ++ } ++ ++ pattrib->pktlen = pktfile.pkt_len; ++ ++ if (ETH_P_IP == pattrib->ether_type) ++ { ++ // The following is for DHCP and ARP packet, we use cck1M to tx these packets and let LPS awake some time ++ // to prevent DHCP protocol fail ++ u8 tmp[24]; ++ _rtw_pktfile_read(&pktfile, &tmp[0], 24); ++ pattrib->dhcp_pkt = 0; ++ if (pktfile.pkt_len > 282) {//MINIMUM_DHCP_PACKET_SIZE) { ++ if (ETH_P_IP == pattrib->ether_type) {// IP header ++ if (((tmp[21] == 68) && (tmp[23] == 67)) || ++ ((tmp[21] == 67) && (tmp[23] == 68))) { ++ // 68 : UDP BOOTP client ++ // 67 : UDP BOOTP server ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("======================update_attrib: get DHCP Packet \n")); ++ // Use low rate to send DHCP packet. ++ //if(pMgntInfo->IOTAction & HT_IOT_ACT_WA_IOT_Broadcom) ++ //{ ++ // tcb_desc->DataRate = MgntQuery_TxRateExcludeCCKRates(ieee);//0xc;//ofdm 6m ++ // tcb_desc->bTxDisableRateFallBack = false; ++ //} ++ //else ++ // pTcb->DataRate = Adapter->MgntInfo.LowestBasicRate; ++ //RTPRINT(FDM, WA_IOT, ("DHCP TranslateHeader(), pTcb->DataRate = 0x%x\n", pTcb->DataRate)); ++ pattrib->dhcp_pkt = 1; ++ } ++ } ++ } ++ } ++ ++ if ( (pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1) ) ++ { ++ rtw_set_scan_deny(padapter, 3000); ++ } ++ ++#ifdef CONFIG_LPS ++ // If EAPOL , ARP , OR DHCP packet, driver must be in active mode. ++ if ( (pattrib->ether_type == 0x0806) || (pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1) ) ++ { ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SPECIAL_PACKET, 1); ++ } ++#endif ++ ++ bmcast = IS_MCAST(pattrib->ra); ++ ++ // get sta_info ++ if (bmcast) { ++ psta = rtw_get_bcmc_stainfo(padapter); ++ } else { ++ psta = rtw_get_stainfo(pstapriv, pattrib->ra); ++ if (psta == NULL) { // if we cannot get psta => drrp the pkt ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_alert_, ("\nupdate_attrib => get sta_info fail, ra:" MAC_FMT"\n", MAC_ARG(pattrib->ra))); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s get sta_info fail, ra:" MAC_FMT"\n", __FUNCTION__, MAC_ARG(pattrib->ra)); ++ #endif ++ res =_FAIL; ++ goto exit; ++ } ++ else if((check_fwstate(pmlmepriv, WIFI_AP_STATE)==_TRUE)&&(!(psta->state & _FW_LINKED))) ++ { ++ res =_FAIL; ++ goto exit; ++ } ++ } ++ ++ if (psta) ++ { ++ pattrib->mac_id = psta->mac_id; ++ pattrib->psta = psta; ++ } ++ else ++ { ++ // if we cannot get psta => drop the pkt ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_alert_, ("\nupdate_attrib => get sta_info fail, ra:" MAC_FMT "\n", MAC_ARG(pattrib->ra))); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s get sta_info fail, ra:" MAC_FMT"\n", __FUNCTION__, MAC_ARG(pattrib->ra)); ++ #endif ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pattrib->ack_policy = 0; ++ // get ether_hdr_len ++ pattrib->pkt_hdrlen = ETH_HLEN;//(pattrib->ether_type == 0x8100) ? (14 + 4 ): 14; //vlan tag ++ ++ pattrib->hdrlen = WLAN_HDR_A3_LEN; ++ pattrib->subtype = WIFI_DATA_TYPE; ++ pattrib->priority = 0; ++ ++ if (check_fwstate(pmlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE)) ++ { ++ if(psta->qos_option) ++ set_qos(&pktfile, pattrib); ++ } ++ else ++ { ++ if(pqospriv->qos_option) ++ { ++ set_qos(&pktfile, pattrib); ++ ++ if(pmlmepriv->acm_mask != 0) ++ { ++ pattrib->priority = qos_acm(pmlmepriv->acm_mask, pattrib->priority); ++ } ++ } ++ } ++ ++ //pattrib->priority = 5; //force to used VI queue, for testing ++ ++ if (psta->ieee8021x_blocked == _TRUE) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\n psta->ieee8021x_blocked == _TRUE \n")); ++ ++ pattrib->encrypt = 0; ++ ++ if((pattrib->ether_type != 0x888e) && (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _FALSE)) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\npsta->ieee8021x_blocked == _TRUE, pattrib->ether_type(%.4x) != 0x888e\n",pattrib->ether_type)); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s psta->ieee8021x_blocked == _TRUE, pattrib->ether_type(%.4x) != 0x888e\n", __FUNCTION__,pattrib->ether_type); ++ #endif ++ res = _FAIL; ++ goto exit; ++ } ++ } ++ else ++ { ++ GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, bmcast); ++ ++ switch(psecuritypriv->dot11AuthAlgrthm) ++ { ++ case dot11AuthAlgrthm_Open: ++ case dot11AuthAlgrthm_Shared: ++ case dot11AuthAlgrthm_Auto: ++ pattrib->key_idx = (u8)psecuritypriv->dot11PrivacyKeyIndex; ++ break; ++ case dot11AuthAlgrthm_8021X: ++ if(bmcast) ++ pattrib->key_idx = (u8)psecuritypriv->dot118021XGrpKeyid; ++ else ++ pattrib->key_idx = 0; ++ break; ++ default: ++ pattrib->key_idx = 0; ++ break; ++ } ++ ++ ++ } ++ ++ switch (pattrib->encrypt) ++ { ++ case _WEP40_: ++ case _WEP104_: ++ pattrib->iv_len = 4; ++ pattrib->icv_len = 4; ++ break; ++ ++ case _TKIP_: ++ pattrib->iv_len = 8; ++ pattrib->icv_len = 4; ++ ++ if(padapter->securitypriv.busetkipkey==_FAIL) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\npadapter->securitypriv.busetkipkey(%d)==_FAIL drop packet\n", padapter->securitypriv.busetkipkey)); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s padapter->securitypriv.busetkipkey(%d)==_FAIL drop packet\n", __FUNCTION__, padapter->securitypriv.busetkipkey); ++ #endif ++ res =_FAIL; ++ goto exit; ++ } ++ ++ break; ++ case _AES_: ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\n pattrib->encrypt=%d (_AES_)\n",pattrib->encrypt)); ++ pattrib->iv_len = 8; ++ pattrib->icv_len = 8; ++ break; ++ ++ default: ++ pattrib->iv_len = 0; ++ pattrib->icv_len = 0; ++ break; ++ } ++ ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ++ ("update_attrib: encrypt=%d securitypriv.sw_encrypt=%d\n", ++ pattrib->encrypt, padapter->securitypriv.sw_encrypt)); ++ ++ if (pattrib->encrypt && ++ ((padapter->securitypriv.sw_encrypt == _TRUE) || (psecuritypriv->hw_decrypted == _FALSE))) ++ { ++ pattrib->bswenc = _TRUE; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_, ++ ("update_attrib: encrypt=%d securitypriv.hw_decrypted=%d bswenc=_TRUE\n", ++ pattrib->encrypt, padapter->securitypriv.sw_encrypt)); ++ } else { ++ pattrib->bswenc = _FALSE; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("update_attrib: bswenc=_FALSE\n")); ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if((pattrib->encrypt && bmcast) || (pattrib->encrypt ==_WEP40_) || (pattrib->encrypt ==_WEP104_)) ++ { ++ pattrib->bswenc = _TRUE;//force using sw enc. ++ } ++#endif ++ ++ rtw_set_tx_chksum_offload(pkt, pattrib); ++ ++ update_attrib_phy_info(pattrib, psta); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++static s32 xmitframe_addmic(_adapter *padapter, struct xmit_frame *pxmitframe){ ++ sint curfragnum,length; ++ u8 *pframe, *payload,mic[8]; ++ struct mic_data micdata; ++ struct sta_info *stainfo; ++ struct qos_priv *pqospriv= &(padapter->mlmepriv.qospriv); ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct security_priv *psecuritypriv=&padapter->securitypriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ u8 priority[4]={0x0,0x0,0x0,0x0}; ++ sint bmcst = IS_MCAST(pattrib->ra); ++ ++ if(pattrib->psta) ++ { ++ stainfo = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0]); ++ } ++ ++ if(stainfo==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return _FAIL; ++ } ++ ++ if(!(stainfo->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state); ++ return _FAIL; ++ } ++ ++_func_enter_; ++ ++ if(pattrib->encrypt ==_TKIP_)//if(psecuritypriv->dot11PrivacyAlgrthm==_TKIP_PRIVACY_) ++ { ++ //encode mic code ++ if(stainfo!= NULL){ ++ u8 null_key[16]={0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0}; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pframe = pxmitframe->buf_addr + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ); ++#else ++ pframe = pxmitframe->buf_addr + TXDESC_OFFSET; ++#endif ++ ++ if(bmcst) ++ { ++ if(_rtw_memcmp(psecuritypriv->dot118021XGrptxmickey[psecuritypriv->dot118021XGrpKeyid].skey, null_key, 16)==_TRUE){ ++ //DbgPrint("\nxmitframe_addmic:stainfo->dot11tkiptxmickey==0\n"); ++ //rtw_msleep_os(10); ++ return _FAIL; ++ } ++ //start to calculate the mic code ++ rtw_secmicsetkey(&micdata, psecuritypriv->dot118021XGrptxmickey[psecuritypriv->dot118021XGrpKeyid].skey); ++ } ++ else ++ { ++ if(_rtw_memcmp(&stainfo->dot11tkiptxmickey.skey[0],null_key, 16)==_TRUE){ ++ //DbgPrint("\nxmitframe_addmic:stainfo->dot11tkiptxmickey==0\n"); ++ //rtw_msleep_os(10); ++ return _FAIL; ++ } ++ //start to calculate the mic code ++ rtw_secmicsetkey(&micdata, &stainfo->dot11tkiptxmickey.skey[0]); ++ } ++ ++ if(pframe[1]&1){ //ToDS==1 ++ rtw_secmicappend(&micdata, &pframe[16], 6); //DA ++ if(pframe[1]&2) //From Ds==1 ++ rtw_secmicappend(&micdata, &pframe[24], 6); ++ else ++ rtw_secmicappend(&micdata, &pframe[10], 6); ++ } ++ else{ //ToDS==0 ++ rtw_secmicappend(&micdata, &pframe[4], 6); //DA ++ if(pframe[1]&2) //From Ds==1 ++ rtw_secmicappend(&micdata, &pframe[16], 6); ++ else ++ rtw_secmicappend(&micdata, &pframe[10], 6); ++ ++ } ++ ++ //if(pqospriv->qos_option==1) ++ if(pattrib->qos_en) ++ priority[0]=(u8)pxmitframe->attrib.priority; ++ ++ ++ rtw_secmicappend(&micdata, &priority[0], 4); ++ ++ payload=pframe; ++ ++ for(curfragnum=0;curfragnumnr_frags;curfragnum++){ ++ payload=(u8 *)RND4((SIZE_PTR)(payload)); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("===curfragnum=%d, pframe= 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x,!!!\n", ++ curfragnum,*payload, *(payload+1),*(payload+2),*(payload+3),*(payload+4),*(payload+5),*(payload+6),*(payload+7))); ++ ++ payload=payload+pattrib->hdrlen+pattrib->iv_len; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("curfragnum=%d pattrib->hdrlen=%d pattrib->iv_len=%d",curfragnum,pattrib->hdrlen,pattrib->iv_len)); ++ if((curfragnum+1)==pattrib->nr_frags){ ++ length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len-( (pattrib->bswenc) ? pattrib->icv_len : 0); ++ rtw_secmicappend(&micdata, payload,length); ++ payload=payload+length; ++ } ++ else{ ++ length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-( (pattrib->bswenc) ? pattrib->icv_len : 0); ++ rtw_secmicappend(&micdata, payload, length); ++ payload=payload+length+pattrib->icv_len; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("curfragnum=%d length=%d pattrib->icv_len=%d",curfragnum,length,pattrib->icv_len)); ++ } ++ } ++ rtw_secgetmic(&micdata,&(mic[0])); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: before add mic code!!!\n")); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: pattrib->last_txcmdsz=%d!!!\n",pattrib->last_txcmdsz)); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: mic[0]=0x%.2x ,mic[1]=0x%.2x ,mic[2]=0x%.2x ,mic[3]=0x%.2x \n\ ++ mic[4]=0x%.2x ,mic[5]=0x%.2x ,mic[6]=0x%.2x ,mic[7]=0x%.2x !!!!\n", ++ mic[0],mic[1],mic[2],mic[3],mic[4],mic[5],mic[6],mic[7])); ++ //add mic code and add the mic code length in last_txcmdsz ++ ++ _rtw_memcpy(payload, &(mic[0]),8); ++ pattrib->last_txcmdsz+=8; ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("\n ========last pkt========\n")); ++ payload=payload-pattrib->last_txcmdsz+8; ++ for(curfragnum=0;curfragnumlast_txcmdsz;curfragnum=curfragnum+8) ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,(" %.2x, %.2x, %.2x, %.2x, %.2x, %.2x, %.2x, %.2x ", ++ *(payload+curfragnum), *(payload+curfragnum+1), *(payload+curfragnum+2),*(payload+curfragnum+3), ++ *(payload+curfragnum+4),*(payload+curfragnum+5),*(payload+curfragnum+6),*(payload+curfragnum+7))); ++ } ++ else{ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: rtw_get_stainfo==NULL!!!\n")); ++ } ++ } ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++static s32 xmitframe_swencrypt(_adapter *padapter, struct xmit_frame *pxmitframe){ ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ //struct security_priv *psecuritypriv=&padapter->securitypriv; ++ ++_func_enter_; ++ ++ //if((psecuritypriv->sw_encrypt)||(pattrib->bswenc)) ++ if(pattrib->bswenc) ++ { ++ //DBG_871X("start xmitframe_swencrypt\n"); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_alert_,("### xmitframe_swencrypt\n")); ++ switch(pattrib->encrypt){ ++ case _WEP40_: ++ case _WEP104_: ++ rtw_wep_encrypt(padapter, (u8 *)pxmitframe); ++ break; ++ case _TKIP_: ++ rtw_tkip_encrypt(padapter, (u8 *)pxmitframe); ++ break; ++ case _AES_: ++ rtw_aes_encrypt(padapter, (u8 * )pxmitframe); ++ break; ++ default: ++ break; ++ } ++ ++ } else { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_notice_,("### xmitframe_hwencrypt\n")); ++ } ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++s32 rtw_make_wlanhdr (_adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib) ++{ ++ u16 *qc; ++ ++ struct rtw_ieee80211_hdr *pwlanhdr = (struct rtw_ieee80211_hdr *)hdr; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv = &pmlmepriv->qospriv; ++ u8 qos_option = _FALSE; ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *ptdls_sta=NULL, *psta_backup=NULL; ++ u8 direct_link=0; ++#endif //CONFIG_TDLS ++ ++ sint res = _SUCCESS; ++ u16 *fctrl = &pwlanhdr->frame_ctl; ++ ++ struct sta_info *psta; ++ ++ sint bmcst = IS_MCAST(pattrib->ra); ++ ++_func_enter_; ++ ++ if (pattrib->psta) { ++ psta = pattrib->psta; ++ } else { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ if(bmcst) { ++ psta = rtw_get_bcmc_stainfo(padapter); ++ } else { ++ psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra); ++ } ++ } ++ ++ if(psta==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return _FAIL; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return _FAIL; ++ } ++ ++ _rtw_memset(hdr, 0, WLANHDR_OFFSET); ++ ++ SetFrameSubType(fctrl, pattrib->subtype); ++ ++ if (pattrib->subtype & WIFI_DATA_TYPE) ++ { ++ if ((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)) { ++ //to_ds = 1, fr_ds = 0; ++#ifdef CONFIG_TDLS ++ if((ptdlsinfo->setup_state == TDLS_LINKED_STATE)){ ++ ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst); ++ if((ptdls_sta!=NULL)&&(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE)&&(pattrib->ether_type!=0x0806)){ ++ //TDLS data transfer, ToDS=0, FrDs=0 ++ _rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN); ++ direct_link=1; ++ }else{ ++ // 1.Data transfer to AP ++ // 2.Arp pkt will relayed by AP ++ SetToDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN); ++ } ++ }else ++#endif //CONFIG_TDLS ++ { ++ //Data transfer to AP ++ SetToDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN); ++ } ++ ++ if (pqospriv->qos_option) ++ qos_option = _TRUE; ++ ++ } ++ else if ((check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ) { ++ //to_ds = 0, fr_ds = 1; ++ SetFrDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN); ++ ++ if(psta->qos_option) ++ qos_option = _TRUE; ++ } ++ else if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) { ++ _rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN); ++ ++ if(psta->qos_option) ++ qos_option = _TRUE; ++ } ++ else { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv))); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ if(pattrib->mdata) ++ SetMData(fctrl); ++ ++ if (pattrib->encrypt) ++ SetPrivacy(fctrl); ++ ++ if (qos_option) ++ { ++ qc = (unsigned short *)(hdr + pattrib->hdrlen - 2); ++ ++ if (pattrib->priority) ++ SetPriority(qc, pattrib->priority); ++ ++ SetEOSP(qc, pattrib->eosp); ++ ++ SetAckpolicy(qc, pattrib->ack_policy); ++ } ++ ++ //TODO: fill HT Control Field ++ ++ //Update Seq Num will be handled by f/w ++ { ++ if(psta){ ++#ifdef CONFIG_TDLS ++ if(direct_link==1) ++ { ++ psta_backup = psta; ++ psta = ptdls_sta; ++ } ++#endif //CONFIG_TDLS ++ ++ psta->sta_xmitpriv.txseq_tid[pattrib->priority]++; ++ psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF; ++ ++ pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority]; ++ ++ SetSeqNum(hdr, pattrib->seqnum); ++ ++ ++ //check if enable ampdu ++ if(pattrib->ht_en && psta->htpriv.ampdu_enable) ++ { ++ if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority)) ++ pattrib->ampdu_en = _TRUE; ++ } ++ ++ //re-check if enable ampdu by BA_starting_seqctrl ++ if(pattrib->ampdu_en == _TRUE) ++ { ++ u16 tx_seq; ++ ++ tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f]; ++ ++ //check BA_starting_seqctrl ++ if(SN_LESS(pattrib->seqnum, tx_seq)) ++ { ++ //DBG_871X("tx ampdu seqnum(%d) < tx_seq(%d)\n", pattrib->seqnum, tx_seq); ++ pattrib->ampdu_en = _FALSE;//AGG BK ++ } ++ else if(SN_EQUAL(pattrib->seqnum, tx_seq)) ++ { ++ psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff; ++ ++ pattrib->ampdu_en = _TRUE;//AGG EN ++ } ++ else ++ { ++ //DBG_871X("tx ampdu over run\n"); ++ psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff; ++ pattrib->ampdu_en = _TRUE;//AGG EN ++ } ++ ++ } ++ ++#ifdef CONFIG_TDLS ++ if(direct_link==1) ++ { ++ if (pattrib->encrypt){ ++ pattrib->encrypt= _AES_; ++ pattrib->iv_len=8; ++ pattrib->icv_len=8; ++ } ++ ++ //qos_en, ht_en, init rate, ,bw, ch_offset, sgi ++ //pattrib->qos_en = ptdls_sta->qos_option; ++ pattrib->ht_en = ptdls_sta->htpriv.ht_option; ++ pattrib->raid = ptdls_sta->raid; ++ pattrib->bwmode = ptdls_sta->htpriv.bwmode; ++ pattrib->ch_offset = ptdls_sta->htpriv.ch_offset; ++ pattrib->sgi= ptdls_sta->htpriv.sgi; ++ ++ pattrib->mac_id = ptdls_sta->mac_id; ++ ++ psta = psta_backup; ++ } ++#endif //CONFIG_TDLS ++ ++ } ++ } ++ ++ } ++ else ++ { ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++s32 rtw_txframes_pending(_adapter *padapter) ++{ ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ return ((_rtw_queue_empty(&pxmitpriv->be_pending) == _FALSE) || ++ (_rtw_queue_empty(&pxmitpriv->bk_pending) == _FALSE) || ++ (_rtw_queue_empty(&pxmitpriv->vi_pending) == _FALSE) || ++ (_rtw_queue_empty(&pxmitpriv->vo_pending) == _FALSE)); ++} ++ ++s32 rtw_txframes_sta_ac_pending(_adapter *padapter, struct pkt_attrib *pattrib) ++{ ++ struct sta_info *psta; ++ struct tx_servq *ptxservq; ++ int priority = pattrib->priority; ++ ++ if(pattrib->psta) ++ { ++ psta = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0]); ++ } ++ ++ if(psta==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return 0; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return 0; ++ } ++ ++ switch(priority) ++ { ++ case 1: ++ case 2: ++ ptxservq = &(psta->sta_xmitpriv.bk_q); ++ break; ++ case 4: ++ case 5: ++ ptxservq = &(psta->sta_xmitpriv.vi_q); ++ break; ++ case 6: ++ case 7: ++ ptxservq = &(psta->sta_xmitpriv.vo_q); ++ break; ++ case 0: ++ case 3: ++ default: ++ ptxservq = &(psta->sta_xmitpriv.be_q); ++ break; ++ ++ } ++ ++ return ptxservq->qcnt; ++} ++ ++#ifdef CONFIG_TDLS ++ ++int rtw_build_tdls_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 action) ++{ ++ int res=_SUCCESS; ++ ++ switch(action){ ++ case TDLS_SETUP_REQUEST: ++ rtw_build_tdls_setup_req_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_SETUP_RESPONSE: ++ rtw_build_tdls_setup_rsp_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_SETUP_CONFIRM: ++ rtw_build_tdls_setup_cfm_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_TEARDOWN: ++ rtw_build_tdls_teardown_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_DISCOVERY_REQUEST: ++ rtw_build_tdls_dis_req_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_PEER_TRAFFIC_INDICATION: ++ rtw_build_tdls_peer_traffic_indication_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_CHANNEL_SWITCH_REQUEST: ++ rtw_build_tdls_ch_switch_req_ies(padapter, pxmitframe, pframe); ++ break; ++ case TDLS_CHANNEL_SWITCH_RESPONSE: ++ rtw_build_tdls_ch_switch_rsp_ies(padapter, pxmitframe, pframe); ++ break; ++#ifdef CONFIG_WFD ++ case TUNNELED_PROBE_REQ: ++ rtw_build_tunneled_probe_req_ies(padapter, pxmitframe, pframe); ++ break; ++ case TUNNELED_PROBE_RSP: ++ rtw_build_tunneled_probe_rsp_ies(padapter, pxmitframe, pframe); ++ break; ++#endif //CONFIG_WFD ++ default: ++ res=_FAIL; ++ break; ++ } ++ ++ return res; ++} ++ ++s32 rtw_make_tdls_wlanhdr (_adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib, u8 action) ++{ ++ u16 *qc; ++ struct rtw_ieee80211_hdr *pwlanhdr = (struct rtw_ieee80211_hdr *)hdr; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct qos_priv *pqospriv = &pmlmepriv->qospriv; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct sta_info *psta=NULL, *ptdls_sta=NULL; ++ u8 tdls_seq=0, baddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; ++ ++ sint res = _SUCCESS; ++ u16 *fctrl = &pwlanhdr->frame_ctl; ++ ++_func_enter_; ++ ++ _rtw_memset(hdr, 0, WLANHDR_OFFSET); ++ ++ SetFrameSubType(fctrl, pattrib->subtype); ++ ++ switch(action){ ++ case TDLS_SETUP_REQUEST: ++ case TDLS_SETUP_RESPONSE: ++ case TDLS_SETUP_CONFIRM: ++ case TDLS_TEARDOWN: //directly to peer STA or via AP ++ case TDLS_PEER_TRAFFIC_INDICATION: ++ case TDLS_PEER_PSM_REQUEST: //directly to peer STA or via AP ++ case TUNNELED_PROBE_REQ: ++ case TUNNELED_PROBE_RSP: ++ SetToDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN); ++ break; ++ case TDLS_CHANNEL_SWITCH_REQUEST: ++ case TDLS_CHANNEL_SWITCH_RESPONSE: ++ case TDLS_PEER_PSM_RESPONSE: ++ case TDLS_PEER_TRAFFIC_RESPONSE: ++ _rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN); ++ tdls_seq=1; ++ break; ++ case TDLS_DISCOVERY_REQUEST: //unicast: directly to peer sta, Bcast: via AP ++ if(_rtw_memcmp(pattrib->dst, baddr, ETH_ALEN) ) ++ { ++ SetToDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN); ++ } ++ else ++ { ++ _rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN); ++ tdls_seq=1; ++ } ++ break; ++ } ++ ++ if (pattrib->encrypt) ++ SetPrivacy(fctrl); ++ ++ if (pqospriv->qos_option) ++ { ++ qc = (unsigned short *)(hdr + pattrib->hdrlen - 2); ++ if (pattrib->priority) ++ SetPriority(qc, pattrib->priority); ++ SetAckpolicy(qc, pattrib->ack_policy); ++ } ++ ++ psta = pattrib->psta; ++ ++ // 1. update seq_num per link by sta_info ++ // 2. rewrite encrypt to _AES_, also rewrite iv_len, icv_len ++ if(tdls_seq==1){ ++ ptdls_sta=rtw_get_stainfo(pstapriv, pattrib->dst); ++ if(ptdls_sta){ ++ ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]++; ++ ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF; ++ pattrib->seqnum = ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]; ++ SetSeqNum(hdr, pattrib->seqnum); ++ ++ if (pattrib->encrypt){ ++ pattrib->encrypt= _AES_; ++ pattrib->iv_len=8; ++ pattrib->icv_len=8; ++ } ++ }else{ ++ res=_FAIL; ++ goto exit; ++ } ++ }else if(psta){ ++ psta->sta_xmitpriv.txseq_tid[pattrib->priority]++; ++ psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF; ++ pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority]; ++ SetSeqNum(hdr, pattrib->seqnum); ++ } ++ ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++s32 rtw_xmit_tdls_coalesce(_adapter * padapter, struct xmit_frame * pxmitframe, u8 action) ++{ ++ s32 llc_sz; ++ ++ u8 *pframe, *mem_start; ++ ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 *pbuf_start; ++ s32 bmcst = IS_MCAST(pattrib->ra); ++ s32 res = _SUCCESS; ++ ++_func_enter_; ++ ++ if (pattrib->psta) { ++ psta = pattrib->psta; ++ } else { ++ if(bmcst) { ++ psta = rtw_get_bcmc_stainfo(padapter); ++ } else { ++ psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra); ++ } ++ } ++ ++ if(psta==NULL) ++ return _FAIL; ++ ++ if (pxmitframe->buf_addr == NULL) ++ return _FAIL; ++ ++ pbuf_start = pxmitframe->buf_addr; ++ mem_start = pbuf_start + TXDESC_OFFSET; ++ ++ if (rtw_make_tdls_wlanhdr(padapter, mem_start, pattrib, action) == _FAIL) { ++ res = _FAIL; ++ goto exit; ++ } ++ ++ pframe = mem_start; ++ pframe += pattrib->hdrlen; ++ ++ //adding icv, if necessary... ++ if (pattrib->iv_len) ++ { ++ if (psta != NULL) ++ { ++ switch(pattrib->encrypt) ++ { ++ case _WEP40_: ++ case _WEP104_: ++ WEP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ break; ++ case _TKIP_: ++ if(bmcst) ++ TKIP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ else ++ TKIP_IV(pattrib->iv, psta->dot11txpn, 0); ++ break; ++ case _AES_: ++ if(bmcst) ++ AES_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ else ++ AES_IV(pattrib->iv, psta->dot11txpn, 0); ++ break; ++ } ++ } ++ ++ _rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len); ++ pframe += pattrib->iv_len; ++ ++ } ++ ++ llc_sz = rtw_put_snap(pframe, pattrib->ether_type); ++ pframe += llc_sz; ++ ++ //pattrib->pktlen will be counted in rtw_build_tdls_ies ++ pattrib->pktlen = 0; ++ ++ rtw_build_tdls_ies(padapter, pxmitframe, pframe, action); ++ ++ if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) { ++ pframe += pattrib->pktlen; ++ _rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); ++ pframe += pattrib->icv_len; ++ } ++ ++ pattrib->nr_frags = 1; ++ pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->iv_len + llc_sz + ++ ((pattrib->bswenc) ? pattrib->icv_len : 0) + pattrib->pktlen; ++ ++ if (xmitframe_addmic(padapter, pxmitframe) == _FAIL) ++ { ++ goto exit; ++ } ++ ++ xmitframe_swencrypt(padapter, pxmitframe); ++ ++ update_attrib_vcs_info(padapter, pxmitframe); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++#endif //CONFIG_TDLS ++ ++/* ++ * Calculate wlan 802.11 packet MAX size from pkt_attrib ++ * This function doesn't consider fragment case ++ */ ++u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib) ++{ ++ u32 len = 0; ++ ++ len = pattrib->hdrlen + pattrib->iv_len; // WLAN Header and IV ++ len += SNAP_SIZE + sizeof(u16); // LLC ++ len += pattrib->pktlen; ++ if (pattrib->encrypt == _TKIP_) len += 8; // MIC ++ len += pattrib->icv_len; // ICV ++ ++ return len; ++} ++ ++/* ++ ++This sub-routine will perform all the following: ++ ++1. remove 802.3 header. ++2. create wlan_header, based on the info in pxmitframe ++3. append sta's iv/ext-iv ++4. append LLC ++5. move frag chunk from pframe to pxmitframe->mem ++6. apply sw-encrypt, if necessary. ++ ++*/ ++s32 rtw_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe) ++{ ++ struct pkt_file pktfile; ++ ++ s32 frg_inx, frg_len, mpdu_len, llc_sz, mem_sz; ++ ++ SIZE_PTR addr; ++ ++ u8 *pframe, *mem_start; ++ ++ struct sta_info *psta; ++ //struct sta_priv *pstapriv = &padapter->stapriv; ++ //struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ ++ u8 *pbuf_start; ++ ++ s32 bmcst = IS_MCAST(pattrib->ra); ++ s32 res = _SUCCESS; ++ ++_func_enter_; ++ ++ if (pattrib->psta) ++ { ++ psta = pattrib->psta; ++ } else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra); ++ } ++ ++ if(psta==NULL) ++ { ++ ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return _FAIL; ++ } ++ ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return _FAIL; ++ } ++ ++ if (pxmitframe->buf_addr == NULL){ ++ DBG_8192C("==> %s buf_addr==NULL \n",__FUNCTION__); ++ return _FAIL; ++ } ++ ++ pbuf_start = pxmitframe->buf_addr; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ mem_start = pbuf_start + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ); ++#else ++ mem_start = pbuf_start + TXDESC_OFFSET; ++#endif ++ ++ if (rtw_make_wlanhdr(padapter, mem_start, pattrib) == _FAIL) { ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("rtw_xmitframe_coalesce: rtw_make_wlanhdr fail; drop pkt\n")); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ _rtw_open_pktfile(pkt, &pktfile); ++ _rtw_pktfile_read(&pktfile, NULL, pattrib->pkt_hdrlen); ++ ++ frg_inx = 0; ++ frg_len = pxmitpriv->frag_len - 4;//2346-4 = 2342 ++ ++ while (1) ++ { ++ llc_sz = 0; ++ ++ mpdu_len = frg_len; ++ ++ pframe = mem_start; ++ ++ SetMFrag(mem_start); ++ ++ pframe += pattrib->hdrlen; ++ mpdu_len -= pattrib->hdrlen; ++ ++ //adding icv, if necessary... ++ if (pattrib->iv_len) ++ { ++ //if (check_fwstate(pmlmepriv, WIFI_MP_STATE)) ++ // psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv)); ++ //else ++ // psta = rtw_get_stainfo(pstapriv, pattrib->ra); ++ ++ if (psta != NULL) ++ { ++ switch(pattrib->encrypt) ++ { ++ case _WEP40_: ++ case _WEP104_: ++ WEP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ break; ++ case _TKIP_: ++ if(bmcst) ++ TKIP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ else ++ TKIP_IV(pattrib->iv, psta->dot11txpn, 0); ++ break; ++ case _AES_: ++ if(bmcst) ++ AES_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx); ++ else ++ AES_IV(pattrib->iv, psta->dot11txpn, 0); ++ break; ++ } ++ } ++ ++ _rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len); ++ ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_notice_, ++ ("rtw_xmitframe_coalesce: keyid=%d pattrib->iv[3]=%.2x pframe=%.2x %.2x %.2x %.2x\n", ++ padapter->securitypriv.dot11PrivacyKeyIndex, pattrib->iv[3], *pframe, *(pframe+1), *(pframe+2), *(pframe+3))); ++ ++ pframe += pattrib->iv_len; ++ ++ mpdu_len -= pattrib->iv_len; ++ } ++ ++ if (frg_inx == 0) { ++ llc_sz = rtw_put_snap(pframe, pattrib->ether_type); ++ pframe += llc_sz; ++ mpdu_len -= llc_sz; ++ } ++ ++ if ((pattrib->icv_len >0) && (pattrib->bswenc)) { ++ mpdu_len -= pattrib->icv_len; ++ } ++ ++ ++ if (bmcst) { ++ // don't do fragment to broadcat/multicast packets ++ mem_sz = _rtw_pktfile_read(&pktfile, pframe, pattrib->pktlen); ++ } else { ++ mem_sz = _rtw_pktfile_read(&pktfile, pframe, mpdu_len); ++ } ++ ++ pframe += mem_sz; ++ ++ if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) { ++ _rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); ++ pframe += pattrib->icv_len; ++ } ++ ++ frg_inx++; ++ ++ if (bmcst || (rtw_endofpktfile(&pktfile) == _TRUE)) ++ { ++ pattrib->nr_frags = frg_inx; ++ ++ pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->iv_len + ((pattrib->nr_frags==1)? llc_sz:0) + ++ ((pattrib->bswenc) ? pattrib->icv_len : 0) + mem_sz; ++ ++ ClearMFrag(mem_start); ++ ++ break; ++ } else { ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("%s: There're still something in packet!\n", __FUNCTION__)); ++ } ++ ++ addr = (SIZE_PTR)(pframe); ++ ++ mem_start = (unsigned char *)RND4(addr) + TXDESC_OFFSET; ++ _rtw_memcpy(mem_start, pbuf_start + TXDESC_OFFSET, pattrib->hdrlen); ++ } ++ ++ if (xmitframe_addmic(padapter, pxmitframe) == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("xmitframe_addmic(padapter, pxmitframe)==_FAIL\n")); ++ res = _FAIL; ++ goto exit; ++ } ++ ++ xmitframe_swencrypt(padapter, pxmitframe); ++ ++ if(bmcst == _FALSE) ++ update_attrib_vcs_info(padapter, pxmitframe); ++ else ++ pattrib->vcs_mode = NONE_VCS; ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++#ifdef CONFIG_IEEE80211W ++//broadcast or multicast management pkt use BIP, unicast management pkt use CCMP encryption ++s32 rtw_mgmt_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe) ++{ ++ struct pkt_file pktfile; ++ s32 frg_inx, frg_len, mpdu_len, llc_sz, mem_sz; ++ SIZE_PTR addr; ++ u8 *pframe, *mem_start = NULL, *tmp_buf=NULL; ++ u8 hw_hdr_offset, subtype ; ++ struct sta_info *psta = NULL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ u8 *pbuf_start; ++ s32 bmcst = IS_MCAST(pattrib->ra); ++ s32 res = _FAIL; ++ u8 *BIP_AAD=NULL; ++ u8 *MGMT_body=NULL; ++ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u8 MME[_MME_IE_LENGTH_]; ++ ++ _irqL irqL; ++ u32 ori_len; ++ mem_start = pframe = (u8 *)(pxmitframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++_func_enter_; ++ ori_len = BIP_AAD_SIZE+pattrib->pktlen; ++ tmp_buf = BIP_AAD = rtw_zmalloc(ori_len); ++ subtype = GetFrameSubType(pframe); //bit(7)~bit(2) ++ ++ if(BIP_AAD == NULL) ++ return _FAIL; ++ ++ _enter_critical_bh(&padapter->security_key_mutex, &irqL); ++ ++ //only support station mode ++ if(!check_fwstate(pmlmepriv, WIFI_STATION_STATE) || !check_fwstate(pmlmepriv, _FW_LINKED)) ++ goto xmitframe_coalesce_success; ++ ++ //IGTK key is not install, it may not support 802.11w ++ if(padapter->securitypriv.binstallBIPkey != _TRUE) ++ { ++ DBG_871X("no instll BIP key\n"); ++ goto xmitframe_coalesce_success; ++ } ++ //station mode doesn't need TX BIP, just ready the code ++ if(bmcst) ++ { ++ int frame_body_len; ++ u8 mic[16]; ++ ++ _rtw_memset(MME, 0, 18); ++ ++ //other types doesn't need the BIP ++ if(GetFrameSubType(pframe) != WIFI_DEAUTH && GetFrameSubType(pframe) != WIFI_DISASSOC) ++ goto xmitframe_coalesce_fail; ++ ++ MGMT_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr); ++ pframe += pattrib->pktlen; ++ ++ //octent 0 and 1 is key index ,BIP keyid is 4 or 5, LSB only need octent 0 ++ MME[0]=padapter->securitypriv.dot11wBIPKeyid; ++ //copy packet number ++ _rtw_memcpy(&MME[2], &pmlmeext->mgnt_80211w_IPN, 6); ++ //increase the packet number ++ pmlmeext->mgnt_80211w_IPN++; ++ ++ //add MME IE with MIC all zero, MME string doesn't include element id and length ++ pframe = rtw_set_ie(pframe, _MME_IE_ , 16 , MME, &(pattrib->pktlen)); ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ // total frame length - header length ++ frame_body_len = pattrib->pktlen - sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ //conscruct AAD, copy frame control field ++ _rtw_memcpy(BIP_AAD, &pwlanhdr->frame_ctl, 2); ++ ClearRetry(BIP_AAD); ++ ClearPwrMgt(BIP_AAD); ++ ClearMData(BIP_AAD); ++ //conscruct AAD, copy address 1 to address 3 ++ _rtw_memcpy(BIP_AAD+2, pwlanhdr->addr1, 18); ++ //copy management fram body ++ _rtw_memcpy(BIP_AAD+BIP_AAD_SIZE, MGMT_body, frame_body_len); ++ /*//dump total packet include MME with zero MIC ++ { ++ int i; ++ printk("Total packet: "); ++ for(i=0; i < BIP_AAD_SIZE+frame_body_len; i++) ++ printk(" %02x ", BIP_AAD[i]); ++ printk("\n"); ++ }*/ ++ //calculate mic ++ if(omac1_aes_128(padapter->securitypriv.dot11wBIPKey[padapter->securitypriv.dot11wBIPKeyid].skey ++ , BIP_AAD, BIP_AAD_SIZE+frame_body_len, mic)) ++ goto xmitframe_coalesce_fail; ++ ++ /*//dump calculated mic result ++ { ++ int i; ++ printk("Calculated mic result: "); ++ for(i=0; i<16; i++) ++ printk(" %02x ", mic[i]); ++ printk("\n"); ++ }*/ ++ //copy right BIP mic value, total is 128bits, we use the 0~63 bits ++ _rtw_memcpy(pframe-8, mic, 8); ++ /*/dump all packet after mic ok ++ { ++ int pp; ++ printk("pattrib->pktlen = %d \n", pattrib->pktlen); ++ for(pp=0;pp< pattrib->pktlen; pp++) ++ printk(" %02x ", mem_start[pp]); ++ printk("\n"); ++ }*/ ++ } ++ else //unicast mgmt frame TX ++ { ++ //start to encrypt mgmt frame ++ if(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC || ++ subtype == WIFI_REASSOCREQ || subtype == WIFI_ACTION) ++ { ++ if (pattrib->psta) ++ psta = pattrib->psta; ++ else ++ { ++ psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra); ++ } ++ ++ if(psta==NULL) ++ { ++ ++ DBG_871X("%s, psta==NUL\n", __func__); ++ goto xmitframe_coalesce_fail; ++ } ++ ++ if(!(psta->state & _FW_LINKED) || pxmitframe->buf_addr==NULL) ++ { ++ DBG_871X("%s, not _FW_LINKED or addr null\n", __func__); ++ goto xmitframe_coalesce_fail; ++ } ++ ++ //DBG_871X("%s, action frame category=%d \n", __func__, pframe[WLAN_HDR_A3_LEN]); ++ //according 802.11-2012 standard, these five types are not robust types ++ if(subtype == WIFI_ACTION && ++ (pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_PUBLIC || ++ pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_HT || ++ pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_UNPROTECTED_WNM || ++ pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_SELF_PROTECTED || ++ pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_P2P)) ++ goto xmitframe_coalesce_fail; ++ //before encrypt dump the management packet content ++ /*{ ++ int i; ++ printk("Management pkt: "); ++ for(i=0; ipktlen; i++) ++ printk(" %02x ", pframe[i]); ++ printk("=======\n"); ++ }*/ ++ if(pattrib->encrypt>0) ++ _rtw_memcpy(pattrib->dot118021x_UncstKey.skey, psta->dot118021x_UncstKey.skey, 16); ++ //bakeup original management packet ++ _rtw_memcpy(tmp_buf, pframe, pattrib->pktlen); ++ //move to data portion ++ pframe += pattrib->hdrlen; ++ ++ //802.11w unicast management packet must be _AES_ ++ pattrib->iv_len = 8; ++ //it's MIC of AES ++ pattrib->icv_len = 8; ++ ++ switch(pattrib->encrypt) ++ { ++ case _AES_: ++ //set AES IV header ++ AES_IV(pattrib->iv, psta->dot11wtxpn, 0); ++ break; ++ default: ++ goto xmitframe_coalesce_fail; ++ } ++ //insert iv header into management frame ++ _rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len); ++ pframe += pattrib->iv_len; ++ //copy mgmt data portion after CCMP header ++ _rtw_memcpy(pframe, tmp_buf+pattrib->hdrlen, pattrib->pktlen-pattrib->hdrlen); ++ //move pframe to end of mgmt pkt ++ pframe += pattrib->pktlen-pattrib->hdrlen; ++ //add 8 bytes CCMP IV header to length ++ pattrib->pktlen += pattrib->iv_len; ++ /*//dump management packet include AES IV header ++ { ++ int i; ++ printk("Management pkt + IV: "); ++ //for(i=0; ipktlen; i++) ++ //printk(" %02x ", mem_start[i]); ++ printk("@@@@@@@@@@@@@\n"); ++ }*/ ++ ++ if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) { ++ _rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); ++ pframe += pattrib->icv_len; ++ } ++ //add 8 bytes MIC ++ pattrib->pktlen += pattrib->icv_len; ++ //set final tx command size ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ //set protected bit must be beofre SW encrypt ++ SetPrivacy(mem_start); ++ /*//dump management packet include AES header ++ { ++ int i; ++ printk("prepare to enc Management pkt + IV: "); ++ for(i=0; ipktlen; i++) ++ printk(" %02x ", mem_start[i]); ++ printk("@@@@@@@@@@@@@\n"); ++ }*/ ++ //software encrypt ++ xmitframe_swencrypt(padapter, pxmitframe); ++ } ++ } ++ ++xmitframe_coalesce_success: ++ _exit_critical_bh(&padapter->security_key_mutex, &irqL); ++ rtw_mfree(BIP_AAD, ori_len); ++_func_exit_; ++ return _SUCCESS; ++ ++xmitframe_coalesce_fail: ++ _exit_critical_bh(&padapter->security_key_mutex, &irqL); ++ rtw_mfree(BIP_AAD, ori_len); ++_func_exit_; ++ ++ return _FAIL; ++} ++#endif //CONFIG_IEEE80211W ++ ++/* Logical Link Control(LLC) SubNetwork Attachment Point(SNAP) header ++ * IEEE LLC/SNAP header contains 8 octets ++ * First 3 octets comprise the LLC portion ++ * SNAP portion, 5 octets, is divided into two fields: ++ * Organizationally Unique Identifier(OUI), 3 octets, ++ * type, defined by that organization, 2 octets. ++ */ ++s32 rtw_put_snap(u8 *data, u16 h_proto) ++{ ++ struct ieee80211_snap_hdr *snap; ++ u8 *oui; ++ ++_func_enter_; ++ ++ snap = (struct ieee80211_snap_hdr *)data; ++ snap->dsap = 0xaa; ++ snap->ssap = 0xaa; ++ snap->ctrl = 0x03; ++ ++ if (h_proto == 0x8137 || h_proto == 0x80f3) ++ oui = P802_1H_OUI; ++ else ++ oui = RFC1042_OUI; ++ ++ snap->oui[0] = oui[0]; ++ snap->oui[1] = oui[1]; ++ snap->oui[2] = oui[2]; ++ ++ *(u16 *)(data + SNAP_SIZE) = htons(h_proto); ++ ++_func_exit_; ++ ++ return SNAP_SIZE + sizeof(u16); ++} ++ ++void rtw_update_protection(_adapter *padapter, u8 *ie, uint ie_len) ++{ ++ ++ uint protection; ++ u8 *perp; ++ sint erp_len; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ ++_func_enter_; ++ ++ switch(pxmitpriv->vcs_setting) ++ { ++ case DISABLE_VCS: ++ pxmitpriv->vcs = NONE_VCS; ++ break; ++ ++ case ENABLE_VCS: ++ break; ++ ++ case AUTO_VCS: ++ default: ++ perp = rtw_get_ie(ie, _ERPINFO_IE_, &erp_len, ie_len); ++ if(perp == NULL) ++ { ++ pxmitpriv->vcs = NONE_VCS; ++ } ++ else ++ { ++ protection = (*(perp + 2)) & BIT(1); ++ if (protection) ++ { ++ if(pregistrypriv->vcs_type == RTS_CTS) ++ pxmitpriv->vcs = RTS_CTS; ++ else ++ pxmitpriv->vcs = CTS_TO_SELF; ++ } ++ else ++ pxmitpriv->vcs = NONE_VCS; ++ } ++ ++ break; ++ ++ } ++ ++_func_exit_; ++ ++} ++ ++void rtw_count_tx_stats(_adapter *padapter, struct xmit_frame *pxmitframe, int sz) ++{ ++ struct sta_info *psta = NULL; ++ struct stainfo_stats *pstats = NULL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) ++ { ++ pxmitpriv->tx_bytes += sz; ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pmlmepriv->LinkDetectInfo.NumTxOkInPeriod += pxmitframe->agg_num; ++#else ++ pmlmepriv->LinkDetectInfo.NumTxOkInPeriod++; ++#endif ++ ++ psta = pxmitframe->attrib.psta; ++ ++ if(psta) ++ { ++ pstats = &psta->sta_stats; ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pstats->tx_pkts += pxmitframe->agg_num; ++#else ++ pstats->tx_pkts++; ++#endif ++ pstats->tx_bytes += sz; ++ } ++ } ++ ++} ++ ++struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv) ++{ ++ _irqL irqL; ++ struct xmit_buf *pxmitbuf = NULL; ++ _list *plist, *phead; ++ _queue *pfree_queue = &pxmitpriv->free_xmit_extbuf_queue; ++ ++_func_enter_; ++ ++ _enter_critical(&pfree_queue->lock, &irqL); ++ ++ if(_rtw_queue_empty(pfree_queue) == _TRUE) { ++ pxmitbuf = NULL; ++ } else { ++ ++ phead = get_list_head(pfree_queue); ++ ++ plist = get_next(phead); ++ ++ pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list); ++ ++ rtw_list_delete(&(pxmitbuf->list)); ++ } ++ ++ if (pxmitbuf != NULL) ++ { ++ pxmitpriv->free_xmit_extbuf_cnt--; ++ #ifdef DBG_XMIT_BUF ++ DBG_871X("DBG_XMIT_BUF ALLOC no=%d, free_xmit_extbuf_cnt=%d\n",pxmitbuf->no, pxmitpriv->free_xmit_extbuf_cnt); ++ #endif ++ ++ ++ pxmitbuf->priv_data = NULL; ++ ++#ifdef CONFIG_SDIO_HCI ++ pxmitbuf->len = 0; ++ pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead; ++#endif ++#ifdef CONFIG_PCI_HCI ++ pxmitbuf->len = 0; ++#endif ++ ++ if (pxmitbuf->sctx) { ++ DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__); ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_ALLOC); ++ } ++ ++ } ++ ++ _exit_critical(&pfree_queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return pxmitbuf; ++} ++ ++s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) ++{ ++ _irqL irqL; ++ _queue *pfree_queue = &pxmitpriv->free_xmit_extbuf_queue; ++ ++_func_enter_; ++ ++ if(pxmitbuf==NULL) ++ { ++ return _FAIL; ++ } ++ ++ _enter_critical(&pfree_queue->lock, &irqL); ++ ++ rtw_list_delete(&pxmitbuf->list); ++ ++ rtw_list_insert_tail(&(pxmitbuf->list), get_list_head(pfree_queue)); ++ pxmitpriv->free_xmit_extbuf_cnt++; ++ #ifdef DBG_XMIT_BUF ++ DBG_871X("DBG_XMIT_BUF FREE no=%d, free_xmit_extbuf_cnt=%d\n",pxmitbuf->no ,pxmitpriv->free_xmit_extbuf_cnt); ++ #endif ++ ++ _exit_critical(&pfree_queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv) ++{ ++ _irqL irqL; ++ struct xmit_buf *pxmitbuf = NULL; ++ _list *plist, *phead; ++ _queue *pfree_xmitbuf_queue = &pxmitpriv->free_xmitbuf_queue; ++ ++_func_enter_; ++ ++ //DBG_871X("+rtw_alloc_xmitbuf\n"); ++ ++ _enter_critical(&pfree_xmitbuf_queue->lock, &irqL); ++ ++ if(_rtw_queue_empty(pfree_xmitbuf_queue) == _TRUE) { ++ pxmitbuf = NULL; ++ } else { ++ ++ phead = get_list_head(pfree_xmitbuf_queue); ++ ++ plist = get_next(phead); ++ ++ pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list); ++ ++ rtw_list_delete(&(pxmitbuf->list)); ++ } ++ ++ if (pxmitbuf != NULL) ++ { ++ pxmitpriv->free_xmitbuf_cnt--; ++ #ifdef DBG_XMIT_BUF ++ DBG_871X("DBG_XMIT_BUF ALLOC no=%d, free_xmitbuf_cnt=%d\n",pxmitbuf->no, pxmitpriv->free_xmitbuf_cnt); ++ #endif ++ //DBG_871X("alloc, free_xmitbuf_cnt=%d\n", pxmitpriv->free_xmitbuf_cnt); ++ ++ pxmitbuf->priv_data = NULL; ++ ++#ifdef CONFIG_SDIO_HCI ++ pxmitbuf->len = 0; ++ pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead; ++#endif ++#ifdef CONFIG_PCI_HCI ++ pxmitbuf->len = 0; ++#endif ++ ++ if (pxmitbuf->sctx) { ++ DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__); ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_ALLOC); ++ } ++ } ++ #ifdef DBG_XMIT_BUF ++ else ++ { ++ DBG_871X("DBG_XMIT_BUF rtw_alloc_xmitbuf return NULL\n"); ++ } ++ #endif ++ ++ _exit_critical(&pfree_xmitbuf_queue->lock, &irqL); ++ ++_func_exit_; ++ ++ return pxmitbuf; ++} ++ ++s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) ++{ ++ _irqL irqL; ++ _queue *pfree_xmitbuf_queue = &pxmitpriv->free_xmitbuf_queue; ++ ++_func_enter_; ++ ++ //DBG_871X("+rtw_free_xmitbuf\n"); ++ ++ if(pxmitbuf==NULL) ++ { ++ return _FAIL; ++ } ++ ++ if (pxmitbuf->sctx) { ++ DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__); ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_FREE); ++ } ++ ++ if(pxmitbuf->ext_tag) ++ { ++ rtw_free_xmitbuf_ext(pxmitpriv, pxmitbuf); ++ } ++ else ++ { ++ _enter_critical(&pfree_xmitbuf_queue->lock, &irqL); ++ ++ rtw_list_delete(&pxmitbuf->list); ++ ++ rtw_list_insert_tail(&(pxmitbuf->list), get_list_head(pfree_xmitbuf_queue)); ++ ++ pxmitpriv->free_xmitbuf_cnt++; ++ //DBG_871X("FREE, free_xmitbuf_cnt=%d\n", pxmitpriv->free_xmitbuf_cnt); ++ #ifdef DBG_XMIT_BUF ++ DBG_871X("DBG_XMIT_BUF FREE no=%d, free_xmitbuf_cnt=%d\n",pxmitbuf->no ,pxmitpriv->free_xmitbuf_cnt); ++ #endif ++ _exit_critical(&pfree_xmitbuf_queue->lock, &irqL); ++ } ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++void rtw_init_xmitframe(struct xmit_frame *pxframe) ++{ ++ if (pxframe != NULL)//default value setting ++ { ++ pxframe->buf_addr = NULL; ++ pxframe->pxmitbuf = NULL; ++ ++ _rtw_memset(&pxframe->attrib, 0, sizeof(struct pkt_attrib)); ++ //pxframe->attrib.psta = NULL; ++ ++ pxframe->frame_tag = DATA_FRAMETAG; ++ ++#ifdef CONFIG_USB_HCI ++ pxframe->pkt = NULL; ++ pxframe->pkt_offset = 1;//default use pkt_offset to fill tx desc ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pxframe->agg_num = 1; ++#endif ++ ++#endif //#ifdef CONFIG_USB_HCI ++ ++#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) ++ pxframe->pg_num = 1; ++ pxframe->agg_num = 1; ++#endif ++ ++#ifdef CONFIG_XMIT_ACK ++ pxframe->ack_report = 0; ++#endif ++ ++ } ++} ++ ++/* ++Calling context: ++1. OS_TXENTRY ++2. RXENTRY (rx_thread or RX_ISR/RX_CallBack) ++ ++If we turn on USE_RXTHREAD, then, no need for critical section. ++Otherwise, we must use _enter/_exit critical to protect free_xmit_queue... ++ ++Must be very very cautious... ++ ++*/ ++struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv)//(_queue *pfree_xmit_queue) ++{ ++ /* ++ Please remember to use all the osdep_service api, ++ and lock/unlock or _enter/_exit critical to protect ++ pfree_xmit_queue ++ */ ++ ++ _irqL irqL; ++ struct xmit_frame *pxframe = NULL; ++ _list *plist, *phead; ++ _queue *pfree_xmit_queue = &pxmitpriv->free_xmit_queue; ++#ifdef PLATFORM_LINUX ++ _adapter *padapter = pxmitpriv->adapter; ++#endif //PLATFORM_LINUX ++ ++_func_enter_; ++ ++ _enter_critical_bh(&pfree_xmit_queue->lock, &irqL); ++ ++ if (_rtw_queue_empty(pfree_xmit_queue) == _TRUE) { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_alloc_xmitframe:%d\n", pxmitpriv->free_xmitframe_cnt)); ++ pxframe = NULL; ++ } else { ++ phead = get_list_head(pfree_xmit_queue); ++ ++ plist = get_next(phead); ++ ++ pxframe = LIST_CONTAINOR(plist, struct xmit_frame, list); ++ ++ rtw_list_delete(&(pxframe->list)); ++ pxmitpriv->free_xmitframe_cnt--; ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_alloc_xmitframe():free_xmitframe_cnt=%d\n", pxmitpriv->free_xmitframe_cnt)); ++ } ++ ++#ifdef PLATFORM_LINUX ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) ++ if(pxmitpriv->free_xmitframe_cnt==1) ++ { ++ if (!rtw_netif_queue_stopped(padapter->pnetdev)) ++ rtw_netif_stop_queue(padapter->pnetdev); ++ } ++#endif ++#endif ++ ++ _exit_critical_bh(&pfree_xmit_queue->lock, &irqL); ++ ++ rtw_init_xmitframe(pxframe); ++ ++_func_exit_; ++ ++ return pxframe; ++} ++ ++struct xmit_frame *rtw_alloc_xmitframe_ext(struct xmit_priv *pxmitpriv) ++{ ++ _irqL irqL; ++ struct xmit_frame *pxframe = NULL; ++ _list *plist, *phead; ++ _queue *queue = &pxmitpriv->free_xframe_ext_queue; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ if (_rtw_queue_empty(queue) == _TRUE) { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_alloc_xmitframe_ext:%d\n", pxmitpriv->free_xframe_ext_cnt)); ++ pxframe = NULL; ++ } else { ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ pxframe = LIST_CONTAINOR(plist, struct xmit_frame, list); ++ ++ rtw_list_delete(&(pxframe->list)); ++ pxmitpriv->free_xframe_ext_cnt--; ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_alloc_xmitframe_ext():free_xmitframe_cnt=%d\n", pxmitpriv->free_xframe_ext_cnt)); ++ } ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++ rtw_init_xmitframe(pxframe); ++ ++_func_exit_; ++ ++ return pxframe; ++} ++ ++struct xmit_frame *rtw_alloc_xmitframe_once(struct xmit_priv *pxmitpriv) ++{ ++ struct xmit_frame *pxframe = NULL; ++ u8 *alloc_addr; ++ ++ alloc_addr = rtw_zmalloc(sizeof(struct xmit_frame) + 4); ++ ++ if (alloc_addr == NULL) ++ goto exit; ++ ++ pxframe = (struct xmit_frame *)N_BYTE_ALIGMENT((SIZE_PTR)(alloc_addr), 4); ++ pxframe->alloc_addr = alloc_addr; ++ ++ pxframe->padapter = pxmitpriv->adapter; ++ pxframe->frame_tag = NULL_FRAMETAG; ++ ++ pxframe->pkt = NULL; ++ ++ pxframe->buf_addr = NULL; ++ pxframe->pxmitbuf = NULL; ++ ++ rtw_init_xmitframe(pxframe); ++ ++ DBG_871X("################## %s ##################\n", __func__); ++ ++exit: ++ return pxframe; ++} ++ ++s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv, struct xmit_frame *pxmitframe) ++{ ++ _irqL irqL; ++ _queue *queue; ++ _adapter *padapter = pxmitpriv->adapter; ++ _pkt *pndis_pkt = NULL; ++ ++_func_enter_; ++ ++ if (pxmitframe == NULL) { ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("======rtw_free_xmitframe():pxmitframe==NULL!!!!!!!!!!\n")); ++ goto exit; ++ } ++ ++ if (pxmitframe->pkt){ ++ pndis_pkt = pxmitframe->pkt; ++ pxmitframe->pkt = NULL; ++ } ++ ++ if (pxmitframe->alloc_addr) { ++ DBG_871X("################## %s with alloc_addr ##################\n", __func__); ++ rtw_mfree(pxmitframe->alloc_addr, sizeof(struct xmit_frame) + 4); ++ goto check_pkt_complete; ++ } ++ ++ if (pxmitframe->ext_tag == 0) ++ queue = &pxmitpriv->free_xmit_queue; ++ else if(pxmitframe->ext_tag == 1) ++ queue = &pxmitpriv->free_xframe_ext_queue; ++ else ++ {} ++ ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ rtw_list_delete(&pxmitframe->list); ++ rtw_list_insert_tail(&pxmitframe->list, get_list_head(queue)); ++ if (pxmitframe->ext_tag == 0) { ++ pxmitpriv->free_xmitframe_cnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_debug_, ("rtw_free_xmitframe():free_xmitframe_cnt=%d\n", pxmitpriv->free_xmitframe_cnt)); ++ } else if(pxmitframe->ext_tag == 1) { ++ pxmitpriv->free_xframe_ext_cnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_debug_, ("rtw_free_xmitframe():free_xframe_ext_cnt=%d\n", pxmitpriv->free_xframe_ext_cnt)); ++ } else { ++ } ++ ++ _exit_critical_bh(&queue->lock, &irqL); ++ ++check_pkt_complete: ++ ++ if(pndis_pkt) ++ rtw_os_pkt_complete(padapter, pndis_pkt); ++ ++exit: ++ ++_func_exit_; ++ ++ return _SUCCESS; ++} ++ ++void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv, _queue *pframequeue) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ struct xmit_frame *pxmitframe; ++ ++_func_enter_; ++ ++ _enter_critical_bh(&(pframequeue->lock), &irqL); ++ ++ phead = get_list_head(pframequeue); ++ plist = get_next(phead); ++ ++ while (rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ ++ pxmitframe = LIST_CONTAINOR(plist, struct xmit_frame, list); ++ ++ plist = get_next(plist); ++ ++ rtw_free_xmitframe(pxmitpriv,pxmitframe); ++ ++ } ++ _exit_critical_bh(&(pframequeue->lock), &irqL); ++ ++_func_exit_; ++} ++ ++s32 rtw_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ if (rtw_xmit_classifier(padapter, pxmitframe) == _FAIL) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ++ ("rtw_xmitframe_enqueue: drop xmit pkt for classifier fail\n")); ++// pxmitframe->pkt = NULL; ++ return _FAIL; ++ } ++ ++ return _SUCCESS; ++} ++ ++static struct xmit_frame *dequeue_one_xmitframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit, struct tx_servq *ptxservq, _queue *pframe_queue) ++{ ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ ++ xmitframe_phead = get_list_head(pframe_queue); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++/*#ifdef RTK_DMP_PLATFORM ++#ifdef CONFIG_USB_TX_AGGREGATION ++ if((ptxservq->qcnt>0) && (ptxservq->qcnt<=2)) ++ { ++ pxmitframe = NULL; ++ ++ tasklet_schedule(&pxmitpriv->xmit_tasklet); ++ ++ break; ++ } ++#endif ++#endif*/ ++ rtw_list_delete(&pxmitframe->list); ++ ++ ptxservq->qcnt--; ++ ++ break; ++ ++ pxmitframe = NULL; ++ ++ } ++ ++ return pxmitframe; ++} ++ ++struct xmit_frame* rtw_dequeue_xframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit_i, sint entry) ++{ ++ _irqL irqL0; ++ _list *sta_plist, *sta_phead; ++ struct hw_xmit *phwxmit; ++ struct tx_servq *ptxservq = NULL; ++ _queue *pframe_queue = NULL; ++ struct xmit_frame *pxmitframe = NULL; ++ _adapter *padapter = pxmitpriv->adapter; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ int i, inx[4]; ++#ifdef CONFIG_USB_HCI ++// int j, tmp, acirp_cnt[4]; ++#endif ++ ++_func_enter_; ++ ++ inx[0] = 0; inx[1] = 1; inx[2] = 2; inx[3] = 3; ++ ++ if(pregpriv->wifi_spec==1) ++ { ++ int j, tmp, acirp_cnt[4]; ++#if 0 ++ if(flagsvo, 1->vi, 2->be, 3->bk. ++ acirp_cnt[0] = pxmitpriv->voq_cnt; ++ acirp_cnt[1] = pxmitpriv->viq_cnt; ++ acirp_cnt[2] = pxmitpriv->beq_cnt; ++ acirp_cnt[3] = pxmitpriv->bkq_cnt; ++ ++ for(i=0; i<4; i++) ++ { ++ for(j=i+1; j<4; j++) ++ { ++ if(acirp_cnt[j]lock, &irqL0); ++ ++ for(i = 0; i < entry; i++) ++ { ++ phwxmit = phwxmit_i + inx[i]; ++ ++ //_enter_critical_ex(&phwxmit->sta_queue->lock, &irqL0); ++ ++ sta_phead = get_list_head(phwxmit->sta_queue); ++ sta_plist = get_next(sta_phead); ++ ++ while ((rtw_end_of_queue_search(sta_phead, sta_plist)) == _FALSE) ++ { ++ ++ ptxservq= LIST_CONTAINOR(sta_plist, struct tx_servq, tx_pending); ++ ++ pframe_queue = &ptxservq->sta_pending; ++ ++ pxmitframe = dequeue_one_xmitframe(pxmitpriv, phwxmit, ptxservq, pframe_queue); ++ ++ if(pxmitframe) ++ { ++ phwxmit->accnt--; ++ ++ //Remove sta node when there is no pending packets. ++ if(_rtw_queue_empty(pframe_queue)) //must be done after get_next and before break ++ rtw_list_delete(&ptxservq->tx_pending); ++ ++ //_exit_critical_ex(&phwxmit->sta_queue->lock, &irqL0); ++ ++ goto exit; ++ } ++ ++ sta_plist = get_next(sta_plist); ++ ++ } ++ ++ //_exit_critical_ex(&phwxmit->sta_queue->lock, &irqL0); ++ ++ } ++ ++exit: ++ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL0); ++ ++_func_exit_; ++ ++ return pxmitframe; ++} ++ ++#if 1 ++struct tx_servq *rtw_get_sta_pending(_adapter *padapter, struct sta_info *psta, sint up, u8 *ac) ++{ ++ struct tx_servq *ptxservq=NULL; ++ ++_func_enter_; ++ ++ switch (up) ++ { ++ case 1: ++ case 2: ++ ptxservq = &(psta->sta_xmitpriv.bk_q); ++ *(ac) = 3; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BK \n")); ++ break; ++ ++ case 4: ++ case 5: ++ ptxservq = &(psta->sta_xmitpriv.vi_q); ++ *(ac) = 1; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VI\n")); ++ break; ++ ++ case 6: ++ case 7: ++ ptxservq = &(psta->sta_xmitpriv.vo_q); ++ *(ac) = 0; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VO \n")); ++ break; ++ ++ case 0: ++ case 3: ++ default: ++ ptxservq = &(psta->sta_xmitpriv.be_q); ++ *(ac) = 2; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BE \n")); ++ break; ++ ++ } ++ ++_func_exit_; ++ ++ return ptxservq; ++} ++#else ++__inline static struct tx_servq *rtw_get_sta_pending ++ (_adapter *padapter, _queue **ppstapending, struct sta_info *psta, sint up) ++{ ++ struct tx_servq *ptxservq; ++ struct hw_xmit *phwxmits = padapter->xmitpriv.hwxmits; ++ ++_func_enter_; ++ ++#ifdef CONFIG_RTL8711 ++ ++ if(IS_MCAST(psta->hwaddr)) ++ { ++ ptxservq = &(psta->sta_xmitpriv.be_q); // we will use be_q to queue bc/mc frames in BCMC_stainfo ++ *ppstapending = &padapter->xmitpriv.bm_pending; ++ } ++ else ++#endif ++ { ++ switch (up) ++ { ++ case 1: ++ case 2: ++ ptxservq = &(psta->sta_xmitpriv.bk_q); ++ *ppstapending = &padapter->xmitpriv.bk_pending; ++ (phwxmits+3)->accnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BK \n")); ++ break; ++ ++ case 4: ++ case 5: ++ ptxservq = &(psta->sta_xmitpriv.vi_q); ++ *ppstapending = &padapter->xmitpriv.vi_pending; ++ (phwxmits+1)->accnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VI\n")); ++ break; ++ ++ case 6: ++ case 7: ++ ptxservq = &(psta->sta_xmitpriv.vo_q); ++ *ppstapending = &padapter->xmitpriv.vo_pending; ++ (phwxmits+0)->accnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VO \n")); ++ break; ++ ++ case 0: ++ case 3: ++ default: ++ ptxservq = &(psta->sta_xmitpriv.be_q); ++ *ppstapending = &padapter->xmitpriv.be_pending; ++ (phwxmits+2)->accnt++; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BE \n")); ++ break; ++ ++ } ++ ++ } ++ ++_func_exit_; ++ ++ return ptxservq; ++} ++#endif ++ ++/* ++ * Will enqueue pxmitframe to the proper queue, ++ * and indicate it to xx_pending list..... ++ */ ++s32 rtw_xmit_classifier(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ //_irqL irqL0; ++ u8 ac_index; ++ struct sta_info *psta; ++ struct tx_servq *ptxservq; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct hw_xmit *phwxmits = padapter->xmitpriv.hwxmits; ++ sint res = _SUCCESS; ++ ++_func_enter_; ++ ++ if (pattrib->psta) { ++ psta = pattrib->psta; ++ } else { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta = rtw_get_stainfo(pstapriv, pattrib->ra); ++ } ++ ++ if (psta == NULL) { ++ res = _FAIL; ++ DBG_8192C("rtw_xmit_classifier: psta == NULL\n"); ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("rtw_xmit_classifier: psta == NULL\n")); ++ goto exit; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return _FAIL; ++ } ++ ++ ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index)); ++ ++ //_enter_critical(&pstapending->lock, &irqL0); ++ ++ if (rtw_is_list_empty(&ptxservq->tx_pending)) { ++ rtw_list_insert_tail(&ptxservq->tx_pending, get_list_head(phwxmits[ac_index].sta_queue)); ++ } ++ ++ //_enter_critical(&ptxservq->sta_pending.lock, &irqL1); ++ ++ rtw_list_insert_tail(&pxmitframe->list, get_list_head(&ptxservq->sta_pending)); ++ ptxservq->qcnt++; ++ phwxmits[ac_index].accnt++; ++ ++ //_exit_critical(&ptxservq->sta_pending.lock, &irqL1); ++ ++ //_exit_critical(&pstapending->lock, &irqL0); ++ ++exit: ++ ++_func_exit_; ++ ++ return res; ++} ++ ++void rtw_alloc_hwxmits(_adapter *padapter) ++{ ++ struct hw_xmit *hwxmits; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ pxmitpriv->hwxmit_entry = HWXMIT_ENTRY; ++ ++ pxmitpriv->hwxmits = (struct hw_xmit *)rtw_zmalloc(sizeof (struct hw_xmit) * pxmitpriv->hwxmit_entry); ++ ++ hwxmits = pxmitpriv->hwxmits; ++ ++ if(pxmitpriv->hwxmit_entry == 5) ++ { ++ //pxmitpriv->bmc_txqueue.head = 0; ++ //hwxmits[0] .phwtxqueue = &pxmitpriv->bmc_txqueue; ++ hwxmits[0] .sta_queue = &pxmitpriv->bm_pending; ++ ++ //pxmitpriv->vo_txqueue.head = 0; ++ //hwxmits[1] .phwtxqueue = &pxmitpriv->vo_txqueue; ++ hwxmits[1] .sta_queue = &pxmitpriv->vo_pending; ++ ++ //pxmitpriv->vi_txqueue.head = 0; ++ //hwxmits[2] .phwtxqueue = &pxmitpriv->vi_txqueue; ++ hwxmits[2] .sta_queue = &pxmitpriv->vi_pending; ++ ++ //pxmitpriv->bk_txqueue.head = 0; ++ //hwxmits[3] .phwtxqueue = &pxmitpriv->bk_txqueue; ++ hwxmits[3] .sta_queue = &pxmitpriv->bk_pending; ++ ++ //pxmitpriv->be_txqueue.head = 0; ++ //hwxmits[4] .phwtxqueue = &pxmitpriv->be_txqueue; ++ hwxmits[4] .sta_queue = &pxmitpriv->be_pending; ++ ++ } ++ else if(pxmitpriv->hwxmit_entry == 4) ++ { ++ ++ //pxmitpriv->vo_txqueue.head = 0; ++ //hwxmits[0] .phwtxqueue = &pxmitpriv->vo_txqueue; ++ hwxmits[0] .sta_queue = &pxmitpriv->vo_pending; ++ ++ //pxmitpriv->vi_txqueue.head = 0; ++ //hwxmits[1] .phwtxqueue = &pxmitpriv->vi_txqueue; ++ hwxmits[1] .sta_queue = &pxmitpriv->vi_pending; ++ ++ //pxmitpriv->be_txqueue.head = 0; ++ //hwxmits[2] .phwtxqueue = &pxmitpriv->be_txqueue; ++ hwxmits[2] .sta_queue = &pxmitpriv->be_pending; ++ ++ //pxmitpriv->bk_txqueue.head = 0; ++ //hwxmits[3] .phwtxqueue = &pxmitpriv->bk_txqueue; ++ hwxmits[3] .sta_queue = &pxmitpriv->bk_pending; ++ } ++ else ++ { ++ ++ ++ } ++ ++ ++} ++ ++void rtw_free_hwxmits(_adapter *padapter) ++{ ++ struct hw_xmit *hwxmits; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ hwxmits = pxmitpriv->hwxmits; ++ if(hwxmits) ++ rtw_mfree((u8 *)hwxmits, (sizeof (struct hw_xmit) * pxmitpriv->hwxmit_entry)); ++} ++ ++void rtw_init_hwxmits(struct hw_xmit *phwxmit, sint entry) ++{ ++ sint i; ++_func_enter_; ++ for(i = 0; i < entry; i++, phwxmit++) ++ { ++ //_rtw_spinlock_init(&phwxmit->xmit_lock); ++ //_rtw_init_listhead(&phwxmit->pending); ++ //phwxmit->txcmdcnt = 0; ++ phwxmit->accnt = 0; ++ } ++_func_exit_; ++} ++ ++#ifdef CONFIG_BR_EXT ++int rtw_br_client_tx(_adapter *padapter, struct sk_buff **pskb) ++{ ++ struct sk_buff *skb = *pskb; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ _irqL irqL; ++ //if(check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ++ { ++ void dhcp_flag_bcast(_adapter *priv, struct sk_buff *skb); ++ int res, is_vlan_tag=0, i, do_nat25=1; ++ unsigned short vlan_hdr=0; ++ void *br_port = NULL; ++ ++ //mac_clone_handle_frame(priv, skb); ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ br_port = padapter->pnetdev->br_port; ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++ br_port = rcu_dereference(padapter->pnetdev->rx_handler_data); ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ _enter_critical_bh(&padapter->br_ext_lock, &irqL); ++ if ( !(skb->data[0] & 1) && ++ br_port && ++ memcmp(skb->data+MACADDRLEN, padapter->br_mac, MACADDRLEN) && ++ *((unsigned short *)(skb->data+MACADDRLEN*2)) != __constant_htons(ETH_P_8021Q) && ++ *((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP) && ++ !memcmp(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN) && padapter->scdb_entry) { ++ memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN); ++ padapter->scdb_entry->ageing_timer = jiffies; ++ _exit_critical_bh(&padapter->br_ext_lock, &irqL); ++ } ++ else ++ //if (!priv->pmib->ethBrExtInfo.nat25_disable) ++ { ++// if (priv->dev->br_port && ++// !memcmp(skb->data+MACADDRLEN, priv->br_mac, MACADDRLEN)) { ++#if 1 ++ if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_8021Q)) { ++ is_vlan_tag = 1; ++ vlan_hdr = *((unsigned short *)(skb->data+MACADDRLEN*2+2)); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+MACADDRLEN*2+2-i*2)) = *((unsigned short *)(skb->data+MACADDRLEN*2-2-i*2)); ++ skb_pull(skb, 4); ++ } ++ //if SA == br_mac && skb== IP => copy SIP to br_ip ?? why ++ if (!memcmp(skb->data+MACADDRLEN, padapter->br_mac, MACADDRLEN) && ++ (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP))) ++ memcpy(padapter->br_ip, skb->data+WLAN_ETHHDR_LEN+12, 4); ++ ++ if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP)) { ++ if (memcmp(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN)) { ++ void *scdb_findEntry(_adapter *priv, unsigned char *macAddr, unsigned char *ipAddr); ++ ++ if ((padapter->scdb_entry = (struct nat25_network_db_entry *)scdb_findEntry(padapter, ++ skb->data+MACADDRLEN, skb->data+WLAN_ETHHDR_LEN+12)) != NULL) { ++ memcpy(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN); ++ memcpy(padapter->scdb_ip, skb->data+WLAN_ETHHDR_LEN+12, 4); ++ padapter->scdb_entry->ageing_timer = jiffies; ++ do_nat25 = 0; ++ } ++ } ++ else { ++ if (padapter->scdb_entry) { ++ padapter->scdb_entry->ageing_timer = jiffies; ++ do_nat25 = 0; ++ } ++ else { ++ memset(padapter->scdb_mac, 0, MACADDRLEN); ++ memset(padapter->scdb_ip, 0, 4); ++ } ++ } ++ } ++ _exit_critical_bh(&padapter->br_ext_lock, &irqL); ++#endif // 1 ++ if (do_nat25) ++ { ++ int nat25_db_handle(_adapter *priv, struct sk_buff *skb, int method); ++ if (nat25_db_handle(padapter, skb, NAT25_CHECK) == 0) { ++ struct sk_buff *newskb; ++ ++ if (is_vlan_tag) { ++ skb_push(skb, 4); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2)); ++ *((unsigned short *)(skb->data+MACADDRLEN*2)) = __constant_htons(ETH_P_8021Q); ++ *((unsigned short *)(skb->data+MACADDRLEN*2+2)) = vlan_hdr; ++ } ++ ++ newskb = rtw_skb_copy(skb); ++ if (newskb == NULL) { ++ //priv->ext_stats.tx_drops++; ++ DEBUG_ERR("TX DROP: rtw_skb_copy fail!\n"); ++ //goto stop_proc; ++ return -1; ++ } ++ rtw_skb_free(skb); ++ ++ *pskb = skb = newskb; ++ if (is_vlan_tag) { ++ vlan_hdr = *((unsigned short *)(skb->data+MACADDRLEN*2+2)); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+MACADDRLEN*2+2-i*2)) = *((unsigned short *)(skb->data+MACADDRLEN*2-2-i*2)); ++ skb_pull(skb, 4); ++ } ++ } ++ ++ if (skb_is_nonlinear(skb)) ++ DEBUG_ERR("%s(): skb_is_nonlinear!!\n", __FUNCTION__); ++ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)) ++ res = skb_linearize(skb, GFP_ATOMIC); ++#else // (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)) ++ res = skb_linearize(skb); ++#endif // (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)) ++ if (res < 0) { ++ DEBUG_ERR("TX DROP: skb_linearize fail!\n"); ++ //goto free_and_stop; ++ return -1; ++ } ++ ++ res = nat25_db_handle(padapter, skb, NAT25_INSERT); ++ if (res < 0) { ++ if (res == -2) { ++ //priv->ext_stats.tx_drops++; ++ DEBUG_ERR("TX DROP: nat25_db_handle fail!\n"); ++ //goto free_and_stop; ++ return -1; ++ ++ } ++ // we just print warning message and let it go ++ //DEBUG_WARN("%s()-%d: nat25_db_handle INSERT Warning!\n", __FUNCTION__, __LINE__); ++ //return -1; // return -1 will cause system crash on 2011/08/30! ++ return 0; ++ } ++ } ++ ++ memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN); ++ ++ dhcp_flag_bcast(padapter, skb); ++ ++ if (is_vlan_tag) { ++ skb_push(skb, 4); ++ for (i=0; i<6; i++) ++ *((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2)); ++ *((unsigned short *)(skb->data+MACADDRLEN*2)) = __constant_htons(ETH_P_8021Q); ++ *((unsigned short *)(skb->data+MACADDRLEN*2+2)) = vlan_hdr; ++ } ++ } ++#if 0 ++ else{ ++ if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_8021Q)) { ++ is_vlan_tag = 1; ++ } ++ ++ if(is_vlan_tag){ ++ if(ICMPV6_MCAST_MAC(skb->data) && ICMPV6_PROTO1A_VALN(skb->data)){ ++ memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN); ++ } ++ }else ++ { ++ if(ICMPV6_MCAST_MAC(skb->data) && ICMPV6_PROTO1A(skb->data)){ ++ memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN); ++ } ++ } ++ } ++#endif // 0 ++ ++ // check if SA is equal to our MAC ++ if (memcmp(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN)) { ++ //priv->ext_stats.tx_drops++; ++ DEBUG_ERR("TX DROP: untransformed frame SA:%02X%02X%02X%02X%02X%02X!\n", ++ skb->data[6],skb->data[7],skb->data[8],skb->data[9],skb->data[10],skb->data[11]); ++ //goto free_and_stop; ++ return -1; ++ } ++ } ++ return 0; ++} ++#endif // CONFIG_BR_EXT ++ ++static void do_queue_select(_adapter *padapter, struct pkt_attrib *pattrib) ++{ ++ u8 qsel; ++ ++ qsel = pattrib->priority; ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("### do_queue_select priority=%d ,qsel = %d\n",pattrib->priority ,qsel)); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++// if (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE) ++// qsel = 7;// ++#endif ++ ++ pattrib->qsel = qsel; ++} ++ ++/* ++ * The main transmit(tx) entry ++ * ++ * Return ++ * 1 enqueue ++ * 0 success, hardware will handle this xmit frame(packet) ++ * <0 fail ++ */ ++s32 rtw_xmit(_adapter *padapter, _pkt **ppkt) ++{ ++ static u32 start = 0; ++ static u32 drop_cnt = 0; ++#ifdef CONFIG_AP_MODE ++ _irqL irqL0; ++#endif ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct xmit_frame *pxmitframe = NULL; ++#ifdef CONFIG_BR_EXT ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ void *br_port = NULL; ++#endif // CONFIG_BR_EXT ++ ++ s32 res; ++ ++ if (start == 0) ++ start = rtw_get_current_time(); ++ ++ pxmitframe = rtw_alloc_xmitframe(pxmitpriv); ++ ++ if (rtw_get_passing_time_ms(start) > 2000) { ++ if (drop_cnt) ++ DBG_871X("DBG_TX_DROP_FRAME %s no more pxmitframe, drop_cnt:%u\n", __FUNCTION__, drop_cnt); ++ start = rtw_get_current_time(); ++ drop_cnt = 0; ++ } ++ ++ if (pxmitframe == NULL) { ++ drop_cnt ++; ++ RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit: no more pxmitframe\n")); ++ return -1; ++ } ++ ++#ifdef CONFIG_BR_EXT ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ br_port = padapter->pnetdev->br_port; ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++ br_port = rcu_dereference(padapter->pnetdev->rx_handler_data); ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ ++ if( br_port && check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ++ { ++ res = rtw_br_client_tx(padapter, ppkt); ++ if (res == -1) ++ { ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ return -1; ++ } ++ } ++ ++#endif // CONFIG_BR_EXT ++ ++ res = update_attrib(padapter, *ppkt, &pxmitframe->attrib); ++ if (res == _FAIL) { ++ RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit: update attrib fail\n")); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s update attrib fail\n", __FUNCTION__); ++ #endif ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ return -1; ++ } ++ pxmitframe->pkt = *ppkt; ++ ++ rtw_led_control(padapter, LED_CTL_TX); ++ ++ do_queue_select(padapter, &pxmitframe->attrib); ++ ++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS) ++ _enter_critical_bh(&pxmitpriv->lock, &irqL0); ++ if(xmitframe_enqueue_for_sleeping_sta(padapter, pxmitframe) == _TRUE) ++ { ++ _exit_critical_bh(&pxmitpriv->lock, &irqL0); ++ return 1; ++ } ++ _exit_critical_bh(&pxmitpriv->lock, &irqL0); ++#endif ++ ++ if (rtw_hal_xmit(padapter, pxmitframe) == _FALSE) ++ return 1; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_TDLS ++sint xmitframe_enqueue_for_tdls_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ sint ret=_FALSE; ++ ++ _irqL irqL; ++ struct sta_info *ptdls_sta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ int i; ++ ++ ptdls_sta=rtw_get_stainfo(pstapriv, pattrib->dst); ++ if(ptdls_sta==NULL){ ++ return ret; ++ }else if(ptdls_sta->tdls_sta_state&TDLS_LINKED_STATE){ ++ ++ if(pattrib->triggered==1) ++ { ++ ret = _TRUE; ++ return ret; ++ } ++ ++ _enter_critical_bh(&ptdls_sta->sleep_q.lock, &irqL); ++ ++ if(ptdls_sta->state&WIFI_SLEEP_STATE) ++ { ++ rtw_list_delete(&pxmitframe->list); ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ rtw_list_insert_tail(&pxmitframe->list, get_list_head(&ptdls_sta->sleep_q)); ++ ++ ptdls_sta->sleepq_len++; ++ ptdls_sta->sleepq_ac_len++; ++ ++ //indicate 4-AC queue bit in TDLS peer traffic indication ++ switch(pattrib->priority) ++ { ++ case 1: ++ case 2: ++ ptdls_sta->uapsd_bk = ptdls_sta->uapsd_bk | BIT(1); ++ break; ++ case 4: ++ case 5: ++ ptdls_sta->uapsd_vi = ptdls_sta->uapsd_vi | BIT(1); ++ break; ++ case 6: ++ case 7: ++ ptdls_sta->uapsd_vo = ptdls_sta->uapsd_vo | BIT(1); ++ break; ++ case 0: ++ case 3: ++ default: ++ ptdls_sta->uapsd_be = ptdls_sta->uapsd_be | BIT(1); ++ break; ++ } ++ ++ if(ptdls_sta->sleepq_len==1) ++ { ++ //transmit TDLS PTI via AP ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_SD_PTI); ++ } ++ ret = _TRUE; ++ ++ } ++ ++ _exit_critical_bh(&ptdls_sta->sleep_q.lock, &irqL); ++ } ++ ++ return ret; ++ ++} ++#endif //CONFIG_TDLS ++ ++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS) ++ ++sint xmitframe_enqueue_for_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ _irqL irqL; ++ sint ret=_FALSE; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ sint bmcst = IS_MCAST(pattrib->ra); ++#ifdef CONFIG_TDLS ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ ++ if( ptdlsinfo->setup_state == TDLS_LINKED_STATE ) ++ { ++ ret = xmitframe_enqueue_for_tdls_sleeping_sta(padapter, pxmitframe); ++ return ret; ++ } ++#endif //CONFIG_TDLS ++ ++ if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _FALSE) ++ return ret; ++ ++ if(pattrib->psta) ++ { ++ psta = pattrib->psta; ++ } ++ else ++ { ++ DBG_871X("%s, call rtw_get_stainfo()\n", __func__); ++ psta=rtw_get_stainfo(pstapriv, pattrib->ra); ++ } ++ ++ if(psta==NULL) ++ { ++ DBG_871X("%s, psta==NUL\n", __func__); ++ return _FALSE; ++ } ++ ++ if(!(psta->state &_FW_LINKED)) ++ { ++ DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state); ++ return _FALSE; ++ } ++ ++ if(pattrib->triggered==1) ++ { ++ //DBG_871X("directly xmit pspoll_triggered packet\n"); ++ ++ //pattrib->triggered=0; ++ ++ if(bmcst) ++ pattrib->qsel = 0x11;//HIQ ++ ++ ++ return ret; ++ } ++ ++ ++ if(bmcst) ++ { ++ _enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ if(pstapriv->sta_dz_bitmap)//if anyone sta is in ps mode ++ { ++ //pattrib->qsel = 0x11;//HIQ ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ rtw_list_insert_tail(&pxmitframe->list, get_list_head(&psta->sleep_q)); ++ ++ psta->sleepq_len++; ++ ++ pstapriv->tim_bitmap |= BIT(0);// ++ pstapriv->sta_dz_bitmap |= BIT(0); ++ ++ //DBG_871X("enqueue, sq_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap); ++ ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE);//tx bc/mc packets after upate bcn ++ ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ ret = _TRUE; ++ ++ } ++ ++ _exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ return ret; ++ ++ } ++ ++ ++ _enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ if(psta->state&WIFI_SLEEP_STATE) ++ { ++ u8 wmmps_ac=0; ++ ++ if(pstapriv->sta_dz_bitmap&BIT(psta->aid)) ++ { ++ rtw_list_delete(&pxmitframe->list); ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ rtw_list_insert_tail(&pxmitframe->list, get_list_head(&psta->sleep_q)); ++ ++ psta->sleepq_len++; ++ ++ switch(pattrib->priority) ++ { ++ case 1: ++ case 2: ++ wmmps_ac = psta->uapsd_bk&BIT(0); ++ break; ++ case 4: ++ case 5: ++ wmmps_ac = psta->uapsd_vi&BIT(0); ++ break; ++ case 6: ++ case 7: ++ wmmps_ac = psta->uapsd_vo&BIT(0); ++ break; ++ case 0: ++ case 3: ++ default: ++ wmmps_ac = psta->uapsd_be&BIT(0); ++ break; ++ } ++ ++ if(wmmps_ac) ++ psta->sleepq_ac_len++; ++ ++ if(((psta->has_legacy_ac) && (!wmmps_ac)) ||((!psta->has_legacy_ac)&&(wmmps_ac))) ++ { ++ pstapriv->tim_bitmap |= BIT(psta->aid); ++ ++ //DBG_871X("enqueue, sq_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap); ++ ++ if(psta->sleepq_len==1) ++ { ++ //DBG_871X("sleepq_len==1, update BCNTIM\n"); ++ //upate BCN for TIM IE ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ } ++ } ++ ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ //if(psta->sleepq_len > (NR_XMITFRAME>>3)) ++ //{ ++ // wakeup_sta_to_xmit(padapter, psta); ++ //} ++ ++ ret = _TRUE; ++ ++ } ++ ++ } ++ ++ _exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ ++ return ret; ++ ++} ++ ++static void dequeue_xmitframes_to_sleeping_queue(_adapter *padapter, struct sta_info *psta, _queue *pframequeue) ++{ ++ sint ret; ++ _list *plist, *phead; ++ u8 ac_index; ++ struct tx_servq *ptxservq; ++ struct pkt_attrib *pattrib; ++ struct xmit_frame *pxmitframe; ++ struct hw_xmit *phwxmits = padapter->xmitpriv.hwxmits; ++ ++ phead = get_list_head(pframequeue); ++ plist = get_next(phead); ++ ++ while (rtw_end_of_queue_search(phead, plist) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(plist, struct xmit_frame, list); ++ ++ plist = get_next(plist); ++ ++ ret = xmitframe_enqueue_for_sleeping_sta(padapter, pxmitframe); ++ ++ if(_TRUE == ret) ++ { ++ pattrib = &pxmitframe->attrib; ++ ++ ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index)); ++ ++ ptxservq->qcnt--; ++ phwxmits[ac_index].accnt--; ++ } ++ else ++ { ++ //DBG_871X("xmitframe_enqueue_for_sleeping_sta return _FALSE\n"); ++ } ++ ++ } ++ ++} ++ ++void stop_sta_xmit(_adapter *padapter, struct sta_info *psta) ++{ ++ _irqL irqL0; ++ struct sta_info *psta_bmc; ++ struct sta_xmit_priv *pstaxmitpriv; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ pstaxmitpriv = &psta->sta_xmitpriv; ++ ++ //for BC/MC Frames ++ psta_bmc = rtw_get_bcmc_stainfo(padapter); ++ ++ ++ _enter_critical_bh(&pxmitpriv->lock, &irqL0); ++ ++ psta->state |= WIFI_SLEEP_STATE; ++ ++#ifdef CONFIG_TDLS ++ if( !(psta->tdls_sta_state & TDLS_LINKED_STATE) ) ++#endif //CONFIG_TDLS ++ pstapriv->sta_dz_bitmap |= BIT(psta->aid); ++ ++ ++ ++ dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->vo_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->vo_q.tx_pending)); ++ ++ ++ dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->vi_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->vi_q.tx_pending)); ++ ++ ++ dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->be_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending)); ++ ++ ++ dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->bk_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->bk_q.tx_pending)); ++ ++#ifdef CONFIG_TDLS ++ if( !(psta->tdls_sta_state & TDLS_LINKED_STATE) ) ++ { ++ if( psta_bmc != NULL ) ++ { ++#endif //CONFIG_TDLS ++ ++ ++ //for BC/MC Frames ++ pstaxmitpriv = &psta_bmc->sta_xmitpriv; ++ dequeue_xmitframes_to_sleeping_queue(padapter, psta_bmc, &pstaxmitpriv->be_q.sta_pending); ++ rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending)); ++ ++ ++#ifdef CONFIG_TDLS ++ } ++ } ++#endif //CONFIG_TDLS ++ _exit_critical_bh(&pxmitpriv->lock, &irqL0); ++ ++ ++} ++ ++void wakeup_sta_to_xmit(_adapter *padapter, struct sta_info *psta) ++{ ++ _irqL irqL; ++ u8 update_mask=0, wmmps_ac=0; ++ struct sta_info *psta_bmc; ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ psta_bmc = rtw_get_bcmc_stainfo(padapter); ++ ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&psta->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ switch(pxmitframe->attrib.priority) ++ { ++ case 1: ++ case 2: ++ wmmps_ac = psta->uapsd_bk&BIT(1); ++ break; ++ case 4: ++ case 5: ++ wmmps_ac = psta->uapsd_vi&BIT(1); ++ break; ++ case 6: ++ case 7: ++ wmmps_ac = psta->uapsd_vo&BIT(1); ++ break; ++ case 0: ++ case 3: ++ default: ++ wmmps_ac = psta->uapsd_be&BIT(1); ++ break; ++ } ++ ++ psta->sleepq_len--; ++ if(psta->sleepq_len>0) ++ pxmitframe->attrib.mdata = 1; ++ else ++ pxmitframe->attrib.mdata = 0; ++ ++ if(wmmps_ac) ++ { ++ psta->sleepq_ac_len--; ++ if(psta->sleepq_ac_len>0) ++ { ++ pxmitframe->attrib.mdata = 1; ++ pxmitframe->attrib.eosp = 0; ++ } ++ else ++ { ++ pxmitframe->attrib.mdata = 0; ++ pxmitframe->attrib.eosp = 1; ++ } ++ } ++ ++ pxmitframe->attrib.triggered = 1; ++ ++/* ++ _exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ } ++ _enter_critical_bh(&psta->sleep_q.lock, &irqL); ++*/ ++ rtw_hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ ++ } ++ ++ //for BC/MC Frames ++ if(!psta_bmc) ++ goto _exit; ++ ++ if((pstapriv->sta_dz_bitmap&0xfffe) == 0x0)//no any sta in ps mode ++ { ++ xmitframe_phead = get_list_head(&psta_bmc->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ psta_bmc->sleepq_len--; ++ if(psta_bmc->sleepq_len>0) ++ pxmitframe->attrib.mdata = 1; ++ else ++ pxmitframe->attrib.mdata = 0; ++ ++ ++ pxmitframe->attrib.triggered = 1; ++/* ++ _exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ } ++ _enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ ++*/ ++ rtw_hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ } ++ ++ if(psta_bmc->sleepq_len==0) ++ { ++ pstapriv->tim_bitmap &= ~BIT(0); ++ pstapriv->sta_dz_bitmap &= ~BIT(0); ++ ++ //DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap); ++ //upate BCN for TIM IE ++ //update_BCNTIM(padapter); ++ update_mask |= BIT(1); ++ } ++ ++ } ++ ++ if(psta->sleepq_len==0) ++ { ++#ifdef CONFIG_TDLS ++ if( psta->tdls_sta_state & TDLS_LINKED_STATE ) ++ { ++ if(psta->state&WIFI_SLEEP_STATE) ++ psta->state ^= WIFI_SLEEP_STATE; ++ ++ goto _exit; ++ } ++#endif //CONFIG_TDLS ++ pstapriv->tim_bitmap &= ~BIT(psta->aid); ++ ++ //DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap); ++ //upate BCN for TIM IE ++ //update_BCNTIM(padapter); ++ update_mask = BIT(0); ++ ++ if(psta->state&WIFI_SLEEP_STATE) ++ psta->state ^= WIFI_SLEEP_STATE; ++ ++ if(psta->state & WIFI_STA_ALIVE_CHK_STATE) ++ { ++ psta->expire_to = pstapriv->expire_to; ++ psta->state ^= WIFI_STA_ALIVE_CHK_STATE; ++ } ++ ++ pstapriv->sta_dz_bitmap &= ~BIT(psta->aid); ++ } ++ ++_exit: ++ ++ //_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ if(update_mask) ++ { ++ //update_BCNTIM(padapter); ++ //printk("%s => call update_beacon\n",__FUNCTION__); ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ } ++ ++} ++ ++void xmit_delivery_enabled_frames(_adapter *padapter, struct sta_info *psta) ++{ ++ _irqL irqL; ++ u8 wmmps_ac=0; ++ _list *xmitframe_plist, *xmitframe_phead; ++ struct xmit_frame *pxmitframe=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ ++ //_enter_critical_bh(&psta->sleep_q.lock, &irqL); ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&psta->sleep_q); ++ xmitframe_plist = get_next(xmitframe_phead); ++ ++ while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ switch(pxmitframe->attrib.priority) ++ { ++ case 1: ++ case 2: ++ wmmps_ac = psta->uapsd_bk&BIT(1); ++ break; ++ case 4: ++ case 5: ++ wmmps_ac = psta->uapsd_vi&BIT(1); ++ break; ++ case 6: ++ case 7: ++ wmmps_ac = psta->uapsd_vo&BIT(1); ++ break; ++ case 0: ++ case 3: ++ default: ++ wmmps_ac = psta->uapsd_be&BIT(1); ++ break; ++ } ++ ++ if(!wmmps_ac) ++ continue; ++ ++ rtw_list_delete(&pxmitframe->list); ++ ++ psta->sleepq_len--; ++ psta->sleepq_ac_len--; ++ ++ if(psta->sleepq_ac_len>0) ++ { ++ pxmitframe->attrib.mdata = 1; ++ pxmitframe->attrib.eosp = 0; ++ } ++ else ++ { ++ pxmitframe->attrib.mdata = 0; ++ pxmitframe->attrib.eosp = 1; ++ } ++ ++ pxmitframe->attrib.triggered = 1; ++ ++/* ++ if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE) ++ { ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ } ++*/ ++ rtw_hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ if((psta->sleepq_ac_len==0) && (!psta->has_legacy_ac) && (wmmps_ac)) ++ { ++#ifdef CONFIG_TDLS ++ if(psta->tdls_sta_state & TDLS_LINKED_STATE ) ++ { ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ return; ++ } ++#endif //CONFIG_TDLS ++ pstapriv->tim_bitmap &= ~BIT(psta->aid); ++ ++ //DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap); ++ //upate BCN for TIM IE ++ //update_BCNTIM(padapter); ++ update_beacon(padapter, _TIM_IE_, NULL, _FALSE); ++ //update_mask = BIT(0); ++ } ++ ++ } ++ ++ //_exit_critical_bh(&psta->sleep_q.lock, &irqL); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++} ++ ++#endif ++ ++void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms) ++{ ++ sctx->timeout_ms = timeout_ms; ++ sctx->submit_time= rtw_get_current_time(); ++#ifdef PLATFORM_LINUX /* TODO: add condition wating interface for other os */ ++ init_completion(&sctx->done); ++#endif ++ sctx->status = RTW_SCTX_SUBMITTED; ++} ++ ++int rtw_sctx_wait(struct submit_ctx *sctx) ++{ ++ int ret = _FAIL; ++ unsigned long expire; ++ int status = 0; ++ ++#ifdef PLATFORM_LINUX ++ expire= sctx->timeout_ms ? msecs_to_jiffies(sctx->timeout_ms) : MAX_SCHEDULE_TIMEOUT; ++ if (!wait_for_completion_timeout(&sctx->done, expire)) { ++ /* timeout, do something?? */ ++ status = RTW_SCTX_DONE_TIMEOUT; ++ DBG_871X("%s timeout\n", __func__); ++ } else { ++ status = sctx->status; ++ } ++#endif ++ ++ if (status == RTW_SCTX_DONE_SUCCESS) { ++ ret = _SUCCESS; ++ } ++ ++ return ret; ++} ++ ++bool rtw_sctx_chk_waring_status(int status) ++{ ++ switch(status) { ++ case RTW_SCTX_DONE_UNKNOWN: ++ case RTW_SCTX_DONE_BUF_ALLOC: ++ case RTW_SCTX_DONE_BUF_FREE: ++ ++ case RTW_SCTX_DONE_DRV_STOP: ++ case RTW_SCTX_DONE_DEV_REMOVE: ++ return _TRUE; ++ default: ++ return _FALSE; ++ } ++} ++ ++void rtw_sctx_done_err(struct submit_ctx **sctx, int status) ++{ ++ if (*sctx) { ++ if (rtw_sctx_chk_waring_status(status)) ++ DBG_871X("%s status:%d\n", __func__, status); ++ (*sctx)->status = status; ++ #ifdef PLATFORM_LINUX ++ complete(&((*sctx)->done)); ++ #endif ++ *sctx = NULL; ++ } ++} ++ ++void rtw_sctx_done(struct submit_ctx **sctx) ++{ ++ rtw_sctx_done_err(sctx, RTW_SCTX_DONE_SUCCESS); ++} ++ ++#ifdef CONFIG_XMIT_ACK ++ ++#ifdef CONFIG_XMIT_ACK_POLLING ++s32 c2h_evt_hdl(_adapter *adapter, struct c2h_evt_hdr *c2h_evt, c2h_id_filter filter); ++ ++/** ++ * rtw_ack_tx_polling - ++ * @pxmitpriv: xmit_priv to address ack_tx_ops ++ * @timeout_ms: timeout msec ++ * ++ * Init ack_tx_ops and then do c2h_evt_hdl() and polling ack_tx_ops repeatedly ++ * till tx report or timeout ++ * Returns: _SUCCESS if TX report ok, _FAIL for others ++ */ ++int rtw_ack_tx_polling(struct xmit_priv *pxmitpriv, u32 timeout_ms) ++{ ++ int ret = _FAIL; ++ struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops; ++ _adapter *adapter = container_of(pxmitpriv, _adapter, xmitpriv); ++ ++ pack_tx_ops->submit_time = rtw_get_current_time(); ++ pack_tx_ops->timeout_ms = timeout_ms; ++ pack_tx_ops->status = RTW_SCTX_SUBMITTED; ++ ++ do { ++ c2h_evt_hdl(adapter, NULL, rtw_hal_c2h_id_filter_ccx(adapter)); ++ if (pack_tx_ops->status != RTW_SCTX_SUBMITTED) ++ break; ++ ++ if (adapter->bDriverStopped) { ++ pack_tx_ops->status = RTW_SCTX_DONE_DRV_STOP; ++ break; ++ } ++ if (adapter->bSurpriseRemoved) { ++ pack_tx_ops->status = RTW_SCTX_DONE_DEV_REMOVE; ++ break; ++ } ++ ++ rtw_msleep_os(10); ++ } while (rtw_get_passing_time_ms(pack_tx_ops->submit_time) < timeout_ms); ++ ++ if (pack_tx_ops->status == RTW_SCTX_SUBMITTED) { ++ pack_tx_ops->status = RTW_SCTX_DONE_TIMEOUT; ++ DBG_871X("%s timeout\n", __func__); ++ } ++ ++ if (pack_tx_ops->status == RTW_SCTX_DONE_SUCCESS) ++ ret = _SUCCESS; ++ ++ return ret; ++} ++#endif ++ ++int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms) ++{ ++#ifdef CONFIG_XMIT_ACK_POLLING ++ return rtw_ack_tx_polling(pxmitpriv, timeout_ms); ++#else ++ struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops; ++ ++ pack_tx_ops->submit_time = rtw_get_current_time(); ++ pack_tx_ops->timeout_ms = timeout_ms; ++ pack_tx_ops->status = RTW_SCTX_SUBMITTED; ++ ++ return rtw_sctx_wait(pack_tx_ops); ++#endif ++} ++ ++void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status) ++{ ++ struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops; ++ ++ if (pxmitpriv->ack_tx) { ++ rtw_sctx_done_err(&pack_tx_ops, status); ++ } else { ++ DBG_871X("%s ack_tx not set\n", __func__); ++ } ++} ++#endif //CONFIG_XMIT_ACK +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/HalPwrSeqCmd.c b/drivers/net/wireless/realtek/rtl8192cu/hal/HalPwrSeqCmd.c +new file mode 100644 +index 000000000000..4ecf2290cd10 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/HalPwrSeqCmd.c +@@ -0,0 +1,175 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/*++ ++Copyright (c) Realtek Semiconductor Corp. All rights reserved. ++ ++Module Name: ++ HalPwrSeqCmd.c ++ ++Abstract: ++ Implement HW Power sequence configuration CMD handling routine for Realtek devices. ++ ++Major Change History: ++ When Who What ++ ---------- --------------- ------------------------------- ++ 2011-10-26 Lucas Modify to be compatible with SD4-CE driver. ++ 2011-07-07 Roger Create. ++ ++--*/ ++#include ++#include ++ ++ ++// ++// Description: ++// This routine deal with the Power Configuration CMDs parsing for RTL8723/RTL8188E Series IC. ++// ++// Assumption: ++// We should follow specific format which was released from HW SD. ++// ++// 2011.07.07, added by Roger. ++// ++u8 HalPwrSeqCmdParsing( ++ PADAPTER padapter, ++ u8 CutVersion, ++ u8 FabVersion, ++ u8 InterfaceType, ++ WLAN_PWR_CFG PwrSeqCmd[]) ++{ ++ WLAN_PWR_CFG PwrCfgCmd = {0}; ++ u8 bPollingBit = _FALSE; ++ u32 AryIdx = 0; ++ u8 value = 0; ++ u32 offset = 0; ++ u32 pollingCount = 0; // polling autoload done. ++ u32 maxPollingCnt = 5000; ++ ++ do { ++ PwrCfgCmd = PwrSeqCmd[AryIdx]; ++ ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ++ ("HalPwrSeqCmdParsing: offset(%#x) cut_msk(%#x) fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x) msk(%#x) value(%#x)\n", ++ GET_PWR_CFG_OFFSET(PwrCfgCmd), ++ GET_PWR_CFG_CUT_MASK(PwrCfgCmd), ++ GET_PWR_CFG_FAB_MASK(PwrCfgCmd), ++ GET_PWR_CFG_INTF_MASK(PwrCfgCmd), ++ GET_PWR_CFG_BASE(PwrCfgCmd), ++ GET_PWR_CFG_CMD(PwrCfgCmd), ++ GET_PWR_CFG_MASK(PwrCfgCmd), ++ GET_PWR_CFG_VALUE(PwrCfgCmd))); ++ ++ //2 Only Handle the command whose FAB, CUT, and Interface are matched ++ if ((GET_PWR_CFG_FAB_MASK(PwrCfgCmd) & FabVersion) && ++ (GET_PWR_CFG_CUT_MASK(PwrCfgCmd) & CutVersion) && ++ (GET_PWR_CFG_INTF_MASK(PwrCfgCmd) & InterfaceType)) ++ { ++ switch (GET_PWR_CFG_CMD(PwrCfgCmd)) ++ { ++ case PWR_CMD_READ: ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_READ\n")); ++ break; ++ ++ case PWR_CMD_WRITE: ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_WRITE\n")); ++ offset = GET_PWR_CFG_OFFSET(PwrCfgCmd); ++ ++#ifdef CONFIG_SDIO_HCI ++ // ++ // We should deal with interface specific address mapping for some interfaces, e.g., SDIO interface ++ // 2011.07.07. ++ // ++ if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO) ++ { ++ // Read Back SDIO Local value ++ value = SdioLocalCmd52Read1Byte(padapter, offset); ++ ++ value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd)); ++ value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)); ++ ++ // Write Back SDIO Local value ++ SdioLocalCmd52Write1Byte(padapter, offset, value); ++ } ++ else ++#endif ++ { ++ // Read the value from system register ++ value = rtw_read8(padapter, offset); ++ ++ value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd)); ++ value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)); ++ ++ // Write the value back to sytem register ++ rtw_write8(padapter, offset, value); ++ } ++ break; ++ ++ case PWR_CMD_POLLING: ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_POLLING\n")); ++ ++ bPollingBit = _FALSE; ++ offset = GET_PWR_CFG_OFFSET(PwrCfgCmd); ++ ++ do { ++#ifdef CONFIG_SDIO_HCI ++ if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO) ++ value = SdioLocalCmd52Read1Byte(padapter, offset); ++ else ++#endif ++ value = rtw_read8(padapter, offset); ++ ++ value &= GET_PWR_CFG_MASK(PwrCfgCmd); ++ if (value == (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd))) ++ bPollingBit = _TRUE; ++ else ++ rtw_udelay_os(10); ++ ++ if (pollingCount++ > maxPollingCnt) { ++ RT_TRACE(_module_hal_init_c_ , _drv_err_, ("Fail to polling Offset[%#x]\n", offset)); ++ return _FALSE; ++ } ++ } while (!bPollingBit); ++ ++ break; ++ ++ case PWR_CMD_DELAY: ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_DELAY\n")); ++ if (GET_PWR_CFG_VALUE(PwrCfgCmd) == PWRSEQ_DELAY_US) ++ rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd)); ++ else ++ rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd)*1000); ++ break; ++ ++ case PWR_CMD_END: ++ // When this command is parsed, end the process ++ RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_END\n")); ++ return _TRUE; ++ break; ++ ++ default: ++ RT_TRACE(_module_hal_init_c_ , _drv_err_, ("HalPwrSeqCmdParsing: Unknown CMD!!\n")); ++ break; ++ } ++ } ++ ++ AryIdx++;//Add Array Index ++ }while(1); ++ ++ return _TRUE; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/dm.c b/drivers/net/wireless/realtek/rtl8192cu/hal/dm.c +new file mode 100644 +index 000000000000..807dfd18e738 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/dm.c +@@ -0,0 +1,313 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#include ++#include ++#include ++ ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++ ++#ifdef CONFIG_RTL8192D ++#include ++#endif ++ ++bool rtw_adapter_linked(_adapter *adapter) ++{ ++ bool linked = _FALSE; ++ struct mlme_priv *mlmepriv = &adapter->mlmepriv; ++ ++ if( (check_fwstate(mlmepriv, WIFI_AP_STATE) == _TRUE) || ++ (check_fwstate(mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE)) ++ { ++ if(adapter->stapriv.asoc_sta_count > 2) ++ linked = _TRUE; ++ } ++ else{//Station mode ++ if(check_fwstate(mlmepriv, _FW_LINKED)== _TRUE) ++ linked = _TRUE; ++ } ++ ++ return linked; ++} ++ ++bool dm_linked(_adapter *adapter) ++{ ++ bool linked; ++ ++ if ((linked = rtw_adapter_linked(adapter))) ++ goto exit; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ((adapter = adapter->pbuddy_adapter) == NULL) ++ goto exit; ++ linked = rtw_adapter_linked(adapter); ++#endif ++ ++exit: ++ return linked; ++} ++ ++#if 0 ++void dm_enable_EDCCA(_adapter *adapter) ++{ ++ // Enable EDCCA. The value is suggested by SD3 Wilson. ++ ++ // ++ // Revised for ASUS 11b/g performance issues, suggested by BB Neil, 2012.04.13. ++ // ++ /*if((pDM_Odm->SupportICType == ODM_RTL8723A)&&(IS_WIRELESS_MODE_G(pAdapter))) ++ { ++ rtw_write8(adapter,rOFDM0_ECCAThreshold,0x00); ++ rtw_write8(adapter,rOFDM0_ECCAThreshold+2,0xFD); ++ ++ } ++ else*/ ++ { ++ rtw_write8(adapter,rOFDM0_ECCAThreshold,0x03); ++ rtw_write8(adapter,rOFDM0_ECCAThreshold+2,0x00); ++ } ++} ++ ++void dm_disable_EDCCA(_adapter *adapter) ++{ ++ // Disable EDCCA.. ++ rtw_write8(adapter, rOFDM0_ECCAThreshold, 0x7f); ++ rtw_write8(adapter, rOFDM0_ECCAThreshold+2, 0x7f); ++} ++ ++// ++// Description: According to initial gain value to determine to enable or disable EDCCA. ++// ++// Suggested by SD3 Wilson. Added by tynli. 2011.11.25. ++// ++void dm_dynamic_EDCCA(_adapter *pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *dmpriv = &pHalData->dmpriv; ++ u8 RegC50, RegC58; ++ ++ RegC50 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0); ++ RegC58 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0); ++ ++ ++ if((RegC50 > 0x28 && RegC58 > 0x28) ++ /*|| ((pDM_Odm->SupportICType == ODM_RTL8723A && IS_WIRELESS_MODE_G(pAdapter) && RegC50>0x26)) ++ || (pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 > 0x28)*/ ++ ) ++ { ++ if(!dmpriv->bPreEdccaEnable) ++ { ++ dm_enable_EDCCA(pAdapter); ++ dmpriv->bPreEdccaEnable = _TRUE; ++ } ++ ++ } ++ else if((RegC50 < 0x25 && RegC58 < 0x25) ++ /*|| (pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 < 0x25)*/ ++ ) ++ { ++ if(dmpriv->bPreEdccaEnable) ++ { ++ dm_disable_EDCCA(pAdapter); ++ dmpriv->bPreEdccaEnable = _FALSE; ++ } ++ } ++} ++#endif ++ ++#define DM_ADAPTIVITY_VER "ADAPTIVITY_V001" ++ ++int dm_adaptivity_get_parm_str(_adapter *pAdapter, char *buf, int len) ++{ ++#ifdef CONFIG_DM_ADAPTIVITY ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *dmpriv = &pHalData->dmpriv; ++ ++ return snprintf(buf, len, DM_ADAPTIVITY_VER"\n" ++ "TH_L2H_ini\tTH_EDCCA_HL_diff\tIGI_Base\tForceEDCCA\tAdapEn_RSSI\tIGI_LowerBound\n" ++ "0x%02x\t%d\t0x%02x\t%d\t%u\t%u\n", ++ (u8)dmpriv->TH_L2H_ini, ++ dmpriv->TH_EDCCA_HL_diff, ++ dmpriv->IGI_Base, ++ dmpriv->ForceEDCCA, ++ dmpriv->AdapEn_RSSI, ++ dmpriv->IGI_LowerBound ++ ); ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ return 0; ++} ++ ++void dm_adaptivity_set_parm(_adapter *pAdapter, s8 TH_L2H_ini, s8 TH_EDCCA_HL_diff, ++ s8 IGI_Base, bool ForceEDCCA, u8 AdapEn_RSSI, u8 IGI_LowerBound) ++{ ++#ifdef CONFIG_DM_ADAPTIVITY ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *dmpriv = &pHalData->dmpriv; ++ ++ dmpriv->TH_L2H_ini = TH_L2H_ini; ++ dmpriv->TH_EDCCA_HL_diff = TH_EDCCA_HL_diff; ++ dmpriv->IGI_Base = IGI_Base; ++ dmpriv->ForceEDCCA = ForceEDCCA; ++ dmpriv->AdapEn_RSSI = AdapEn_RSSI; ++ dmpriv->IGI_LowerBound = IGI_LowerBound; ++ ++#endif /* CONFIG_DM_ADAPTIVITY */ ++} ++ ++void dm_adaptivity_init(_adapter *pAdapter) ++{ ++#ifdef CONFIG_DM_ADAPTIVITY ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *dmpriv = &pHalData->dmpriv; ++ ++ /* ++ if(pDM_Odm->SupportICType == ODM_RTL8723B) ++ { ++ pDM_Odm->TH_L2H_ini = 0xf8; // -8 ++ } ++ if((pDM_Odm->SupportICType == ODM_RTL8192E)&&(pDM_Odm->SupportInterface == ODM_ITRF_PCIE)) ++ { ++ pDM_Odm->TH_L2H_ini = 0xf0; // -16 ++ } ++ else */ ++ { ++ dmpriv->TH_L2H_ini = 0xf9; // -7 ++ } ++ ++ dmpriv->TH_EDCCA_HL_diff = 7; ++ dmpriv->IGI_Base = 0x32; ++ dmpriv->IGI_target = 0x1c; ++ dmpriv->ForceEDCCA = 0; ++ dmpriv->AdapEn_RSSI = 20; ++ dmpriv->IGI_LowerBound = 0; ++ ++ //Reg524[11]=0 is easily to transmit packets during adaptivity test ++ PHY_SetBBReg(pAdapter, 0x524, BIT11, 1); // stop counting if EDCCA is asserted ++ ++#endif /* CONFIG_DM_ADAPTIVITY */ ++} ++ ++void dm_adaptivity(_adapter *pAdapter) ++{ ++#ifdef CONFIG_DM_ADAPTIVITY ++ s8 TH_L2H_dmc, TH_H2L_dmc; ++ s8 TH_L2H, TH_H2L, Diff, IGI_target; ++ u32 value32; ++ BOOLEAN EDCCA_State; ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *dmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &dmpriv->DM_DigTable; ++ u8 IGI = pDigTable->CurIGValue; ++ u8 RSSI_Min = pDigTable->Rssi_val_min; ++ HT_CHANNEL_WIDTH BandWidth = pHalData->CurrentChannelBW; ++ ++ if (!(dmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY)) ++ { ++ LOG_LEVEL(_drv_info_, "Go to odm_DynamicEDCCA() \n"); ++ // Add by Neil Chen to enable edcca to MP Platform ++ // Adjust EDCCA. ++ /*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES) ++ dm_dynamic_EDCCA(pAdapter); ++ */ ++ return; ++ } ++ LOG_LEVEL(_drv_info_, "odm_Adaptivity() =====> \n"); ++ ++ LOG_LEVEL(_drv_info_, "ForceEDCCA=%d, IGI_Base=0x%x, TH_L2H_ini = %d, TH_EDCCA_HL_diff = %d, AdapEn_RSSI = %d\n", ++ dmpriv->ForceEDCCA, dmpriv->IGI_Base, dmpriv->TH_L2H_ini, dmpriv->TH_EDCCA_HL_diff, dmpriv->AdapEn_RSSI); ++ ++ /*if(pDM_Odm->SupportICType & ODM_IC_11AC_SERIES) ++ PHY_SetBBReg(0x800, BIT10, 0); //ADC_mask enable ++ */ ++ ++ if(!dm_linked(pAdapter) || pHalData->CurrentChannel > 149) /* Band4 doesn't need adaptivity */ ++ { ++ /*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES)*/ ++ { ++ PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte0, 0x7f); ++ PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte2, 0x7f); ++ } ++ /*else ++ { ++ ODM_SetBBReg(pDM_Odm, rFPGA0_XB_LSSIReadBack, 0xFFFF, (0x7f<<8) | 0x7f); ++ }*/ ++ return; ++ } ++ ++ if(!dmpriv->ForceEDCCA) ++ { ++ if(RSSI_Min > dmpriv->AdapEn_RSSI) ++ EDCCA_State = 1; ++ else if(RSSI_Min < (dmpriv->AdapEn_RSSI - 5)) ++ EDCCA_State = 0; ++ } ++ else ++ EDCCA_State = 1; ++ //if((pDM_Odm->SupportICType & ODM_IC_11AC_SERIES) && (*pDM_Odm->pBandType == BAND_ON_5G)) ++ //IGI_target = pDM_Odm->IGI_Base; ++ //else ++ { ++ ++ if(BandWidth == HT_CHANNEL_WIDTH_20) //CHANNEL_WIDTH_20 ++ IGI_target = dmpriv->IGI_Base; ++ else if(BandWidth == HT_CHANNEL_WIDTH_40) ++ IGI_target = dmpriv->IGI_Base + 2; ++ /*else if(*pDM_Odm->pBandWidth == ODM_BW80M) ++ IGI_target = pDM_Odm->IGI_Base + 6;*/ ++ else ++ IGI_target = dmpriv->IGI_Base; ++ } ++ ++ dmpriv->IGI_target = (u8)IGI_target; ++ ++ LOG_LEVEL(_drv_info_, "BandWidth=%s, IGI_target=0x%x, EDCCA_State=%d\n", ++ (BandWidth==HT_CHANNEL_WIDTH_40)?"40M":"20M", IGI_target, EDCCA_State); ++ ++ if(EDCCA_State == 1) ++ { ++ Diff = IGI_target -(s8)IGI; ++ TH_L2H_dmc = dmpriv->TH_L2H_ini + Diff; ++ if(TH_L2H_dmc > 10) TH_L2H_dmc = 10; ++ TH_H2L_dmc = TH_L2H_dmc - dmpriv->TH_EDCCA_HL_diff; ++ } ++ else ++ { ++ TH_L2H_dmc = 0x7f; ++ TH_H2L_dmc = 0x7f; ++ } ++ ++ LOG_LEVEL(_drv_info_, "IGI=0x%x, TH_L2H_dmc = %d, TH_H2L_dmc = %d\n", ++ IGI, TH_L2H_dmc, TH_H2L_dmc); ++ ++ /*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES)*/ ++ { ++ PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte0, (u8)TH_L2H_dmc); ++ PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte2, (u8)TH_H2L_dmc); ++ } ++ /*else ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIReadBack, 0xFFFF, ((u8)TH_H2L_dmc<<8) | (u8)TH_L2H_dmc);*/ ++ ++skip_dm: ++ return; ++#endif /* CONFIG_DM_ADAPTIVITY */ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/dm.h b/drivers/net/wireless/realtek/rtl8192cu/hal/dm.h +new file mode 100644 +index 000000000000..cacd58fbf24c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/dm.h +@@ -0,0 +1,30 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ #ifndef __DM_H__ ++#define __DM_H__ ++ ++int dm_adaptivity_get_parm_str(_adapter *pAdapter, char *buf, int len); ++void dm_adaptivity_set_parm(_adapter *pAdapter, s8 TH_L2H_ini, s8 TH_EDCCA_HL_diff, ++ s8 IGI_Base, bool ForceEDCCA, u8 AdapEn_RSSI, u8 IGI_LowerBound); ++void dm_adaptivity_init(_adapter *pAdapter); ++void dm_adaptivity(_adapter *pAdapter); ++ ++#endif /* __DM_H__ */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/hal_com.c b/drivers/net/wireless/realtek/rtl8192cu/hal/hal_com.c +new file mode 100644 +index 000000000000..b9e4dad4e071 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/hal_com.c +@@ -0,0 +1,370 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++#ifdef CONFIG_RTL8192D ++#include ++#endif ++ ++#define _HAL_COM_C_ ++ ++//============================================================ ++// Global var ++//============================================================ ++u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D] = { ++ 0x7f8001fe, // 0, +6.0dB ++ 0x788001e2, // 1, +5.5dB ++ 0x71c001c7, // 2, +5.0dB ++ 0x6b8001ae, // 3, +4.5dB ++ 0x65400195, // 4, +4.0dB ++ 0x5fc0017f, // 5, +3.5dB ++ 0x5a400169, // 6, +3.0dB ++ 0x55400155, // 7, +2.5dB ++ 0x50800142, // 8, +2.0dB ++ 0x4c000130, // 9, +1.5dB ++ 0x47c0011f, // 10, +1.0dB ++ 0x43c0010f, // 11, +0.5dB ++ 0x40000100, // 12, +0dB ++ 0x3c8000f2, // 13, -0.5dB ++ 0x390000e4, // 14, -1.0dB ++ 0x35c000d7, // 15, -1.5dB ++ 0x32c000cb, // 16, -2.0dB ++ 0x300000c0, // 17, -2.5dB ++ 0x2d4000b5, // 18, -3.0dB ++ 0x2ac000ab, // 19, -3.5dB ++ 0x288000a2, // 20, -4.0dB ++ 0x26000098, // 21, -4.5dB ++ 0x24000090, // 22, -5.0dB ++ 0x22000088, // 23, -5.5dB ++ 0x20000080, // 24, -6.0dB ++ 0x1e400079, // 25, -6.5dB ++ 0x1c800072, // 26, -7.0dB ++ 0x1b00006c, // 27. -7.5dB ++ 0x19800066, // 28, -8.0dB ++ 0x18000060, // 29, -8.5dB ++ 0x16c0005b, // 30, -9.0dB ++ 0x15800056, // 31, -9.5dB ++ 0x14400051, // 32, -10.0dB ++ 0x1300004c, // 33, -10.5dB ++ 0x12000048, // 34, -11.0dB ++ 0x11000044, // 35, -11.5dB ++ 0x10000040, // 36, -12.0dB ++ 0x0f00003c,// 37, -12.5dB ++ 0x0e400039,// 38, -13.0dB ++ 0x0d800036,// 39, -13.5dB ++ 0x0cc00033,// 40, -14.0dB ++ 0x0c000030,// 41, -14.5dB ++ 0x0b40002d,// 42, -15.0dB ++}; ++ ++ ++u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8] = { ++ {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, // 0, +0dB ++ {0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04}, // 1, -0.5dB ++ {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, // 2, -1.0dB ++ {0x2d, 0x2d, 0x27, 0x1f, 0x18, 0x0f, 0x08, 0x03}, // 3, -1.5dB ++ {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, // 4, -2.0dB ++ {0x28, 0x28, 0x22, 0x1c, 0x15, 0x0d, 0x07, 0x03}, // 5, -2.5dB ++ {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, // 6, -3.0dB ++ {0x24, 0x23, 0x1f, 0x19, 0x13, 0x0c, 0x06, 0x03}, // 7, -3.5dB ++ {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, // 8, -4.0dB ++ {0x20, 0x20, 0x1b, 0x16, 0x11, 0x08, 0x05, 0x02}, // 9, -4.5dB ++ {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, // 10, -5.0dB ++ {0x1d, 0x1c, 0x18, 0x14, 0x0f, 0x0a, 0x05, 0x02}, // 11, -5.5dB ++ {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, // 12, -6.0dB ++ {0x1a, 0x19, 0x16, 0x12, 0x0d, 0x09, 0x04, 0x02}, // 13, -6.5dB ++ {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, // 14, -7.0dB ++ {0x17, 0x16, 0x13, 0x10, 0x0c, 0x08, 0x04, 0x02}, // 15, -7.5dB ++ {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, // 16, -8.0dB ++ {0x14, 0x14, 0x11, 0x0e, 0x0b, 0x07, 0x03, 0x02}, // 17, -8.5dB ++ {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, // 18, -9.0dB ++ {0x12, 0x12, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, // 19, -9.5dB ++ {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, // 20, -10.0dB ++ {0x10, 0x10, 0x0e, 0x0b, 0x08, 0x05, 0x03, 0x01}, // 21, -10.5dB ++ {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01}, // 22, -11.0dB ++ {0x0e, 0x0e, 0x0c, 0x0a, 0x08, 0x05, 0x02, 0x01}, // 23, -11.5dB ++ {0x0d, 0x0d, 0x0c, 0x0a, 0x07, 0x05, 0x02, 0x01}, // 24, -12.0dB ++ {0x0d, 0x0c, 0x0b, 0x09, 0x07, 0x04, 0x02, 0x01}, // 25, -12.5dB ++ {0x0c, 0x0c, 0x0a, 0x09, 0x06, 0x04, 0x02, 0x01}, // 26, -13.0dB ++ {0x0b, 0x0b, 0x0a, 0x08, 0x06, 0x04, 0x02, 0x01}, // 27, -13.5dB ++ {0x0b, 0x0a, 0x09, 0x08, 0x06, 0x04, 0x02, 0x01}, // 28, -14.0dB ++ {0x0a, 0x0a, 0x09, 0x07, 0x05, 0x03, 0x02, 0x01}, // 29, -14.5dB ++ {0x0a, 0x09, 0x08, 0x07, 0x05, 0x03, 0x02, 0x01}, // 30, -15.0dB ++ {0x09, 0x09, 0x08, 0x06, 0x05, 0x03, 0x01, 0x01}, // 31, -15.5dB ++ {0x09, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01, 0x01} // 32, -16.0dB ++}; ++ ++ ++u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8]= { ++ {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, // 0, +0dB ++ {0x33, 0x32, 0x2b, 0x19, 0x00, 0x00, 0x00, 0x00}, // 1, -0.5dB ++ {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, // 2, -1.0dB ++ {0x2d, 0x2d, 0x17, 0x17, 0x00, 0x00, 0x00, 0x00}, // 3, -1.5dB ++ {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, // 4, -2.0dB ++ {0x28, 0x28, 0x24, 0x14, 0x00, 0x00, 0x00, 0x00}, // 5, -2.5dB ++ {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, // 6, -3.0dB ++ {0x24, 0x23, 0x1f, 0x12, 0x00, 0x00, 0x00, 0x00}, // 7, -3.5dB ++ {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, // 8, -4.0dB ++ {0x20, 0x20, 0x1b, 0x10, 0x00, 0x00, 0x00, 0x00}, // 9, -4.5dB ++ {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, // 10, -5.0dB ++ {0x1d, 0x1c, 0x18, 0x0e, 0x00, 0x00, 0x00, 0x00}, // 11, -5.5dB ++ {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, // 12, -6.0dB ++ {0x1a, 0x19, 0x16, 0x0d, 0x00, 0x00, 0x00, 0x00}, // 13, -6.5dB ++ {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, // 14, -7.0dB ++ {0x17, 0x16, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x00}, // 15, -7.5dB ++ {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, // 16, -8.0dB ++ {0x14, 0x14, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x00}, // 17, -8.5dB ++ {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, // 18, -9.0dB ++ {0x12, 0x12, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, // 19, -9.5dB ++ {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, // 20, -10.0dB ++ {0x10, 0x10, 0x0e, 0x08, 0x00, 0x00, 0x00, 0x00}, // 21, -10.5dB ++ {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00}, // 22, -11.0dB ++ {0x0e, 0x0e, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00}, // 23, -11.5dB ++ {0x0d, 0x0d, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00}, // 24, -12.0dB ++ {0x0d, 0x0c, 0x0b, 0x06, 0x00, 0x00, 0x00, 0x00}, // 25, -12.5dB ++ {0x0c, 0x0c, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00}, // 26, -13.0dB ++ {0x0b, 0x0b, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00}, // 27, -13.5dB ++ {0x0b, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00}, // 28, -14.0dB ++ {0x0a, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00}, // 29, -14.5dB ++ {0x0a, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00}, // 30, -15.0dB ++ {0x09, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00}, // 31, -15.5dB ++ {0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00} // 32, -16.0dB ++}; ++ ++ ++#ifdef CONFIG_CHIP_VER_INTEGRATION ++void dump_chip_info(HAL_VERSION ChipVersion) ++{ ++ if(IS_81XXC(ChipVersion)){ ++ DBG_871X("Chip Version Info: %s_",IS_92C_SERIAL(ChipVersion)?"CHIP_8192C":"CHIP_8188C"); ++ } ++ else if(IS_92D(ChipVersion)){ ++ DBG_871X("Chip Version Info: CHIP_8192D_"); ++ } ++ else if(IS_8723_SERIES(ChipVersion)){ ++ DBG_871X("Chip Version Info: CHIP_8723A_"); ++ } ++ else if(IS_8188E(ChipVersion)){ ++ DBG_871X("Chip Version Info: CHIP_8188E_"); ++ } ++ ++ DBG_871X("%s_",IS_NORMAL_CHIP(ChipVersion)?"Normal_Chip":"Test_Chip"); ++ DBG_871X("%s_",IS_CHIP_VENDOR_TSMC(ChipVersion)?"TSMC":"UMC"); ++ if(IS_A_CUT(ChipVersion)) DBG_871X("A_CUT_"); ++ else if(IS_B_CUT(ChipVersion)) DBG_871X("B_CUT_"); ++ else if(IS_C_CUT(ChipVersion)) DBG_871X("C_CUT_"); ++ else if(IS_D_CUT(ChipVersion)) DBG_871X("D_CUT_"); ++ else if(IS_E_CUT(ChipVersion)) DBG_871X("E_CUT_"); ++ else DBG_871X("UNKNOWN_CUT(%d)_",ChipVersion.CUTVersion); ++ ++ if(IS_1T1R(ChipVersion)) DBG_871X("1T1R_"); ++ else if(IS_1T2R(ChipVersion)) DBG_871X("1T2R_"); ++ else if(IS_2T2R(ChipVersion)) DBG_871X("2T2R_"); ++ else DBG_871X("UNKNOWN_RFTYPE(%d)_",ChipVersion.RFType); ++ ++ ++ DBG_871X("RomVer(%d)\n",ChipVersion.ROMVer); ++} ++ ++#endif ++ ++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 ++ ++u8 //return the final channel plan decision ++hal_com_get_channel_plan( ++ IN PADAPTER padapter, ++ IN u8 hw_channel_plan, //channel plan from HW (efuse/eeprom) ++ IN u8 sw_channel_plan, //channel plan from SW (registry/module param) ++ IN u8 def_channel_plan, //channel plan used when the former two is invalid ++ IN BOOLEAN AutoLoadFail ++ ) ++{ ++ u8 swConfig; ++ u8 chnlPlan; ++ ++ swConfig = _TRUE; ++ if (!AutoLoadFail) ++ { ++ if (!rtw_is_channel_plan_valid(sw_channel_plan)) ++ swConfig = _FALSE; ++ if (hw_channel_plan & EEPROM_CHANNEL_PLAN_BY_HW_MASK) ++ swConfig = _FALSE; ++ } ++ ++ if (swConfig == _TRUE) ++ chnlPlan = sw_channel_plan; ++ else ++ chnlPlan = hw_channel_plan & (~EEPROM_CHANNEL_PLAN_BY_HW_MASK); ++ ++ if (!rtw_is_channel_plan_valid(chnlPlan)) ++ chnlPlan = def_channel_plan; ++ ++ return chnlPlan; ++} ++ ++u8 MRateToHwRate(u8 rate) ++{ ++ u8 ret = DESC_RATE1M; ++ ++ switch(rate) ++ { ++ // CCK and OFDM non-HT rates ++ case IEEE80211_CCK_RATE_1MB: ret = DESC_RATE1M; break; ++ case IEEE80211_CCK_RATE_2MB: ret = DESC_RATE2M; break; ++ case IEEE80211_CCK_RATE_5MB: ret = DESC_RATE5_5M; break; ++ case IEEE80211_CCK_RATE_11MB: ret = DESC_RATE11M; break; ++ case IEEE80211_OFDM_RATE_6MB: ret = DESC_RATE6M; break; ++ case IEEE80211_OFDM_RATE_9MB: ret = DESC_RATE9M; break; ++ case IEEE80211_OFDM_RATE_12MB: ret = DESC_RATE12M; break; ++ case IEEE80211_OFDM_RATE_18MB: ret = DESC_RATE18M; break; ++ case IEEE80211_OFDM_RATE_24MB: ret = DESC_RATE24M; break; ++ case IEEE80211_OFDM_RATE_36MB: ret = DESC_RATE36M; break; ++ case IEEE80211_OFDM_RATE_48MB: ret = DESC_RATE48M; break; ++ case IEEE80211_OFDM_RATE_54MB: ret = DESC_RATE54M; break; ++ ++ // HT rates since here ++ //case MGN_MCS0: ret = DESC_RATEMCS0; break; ++ //case MGN_MCS1: ret = DESC_RATEMCS1; break; ++ //case MGN_MCS2: ret = DESC_RATEMCS2; break; ++ //case MGN_MCS3: ret = DESC_RATEMCS3; break; ++ //case MGN_MCS4: ret = DESC_RATEMCS4; break; ++ //case MGN_MCS5: ret = DESC_RATEMCS5; break; ++ //case MGN_MCS6: ret = DESC_RATEMCS6; break; ++ //case MGN_MCS7: ret = DESC_RATEMCS7; break; ++ ++ default: break; ++ } ++ ++ return ret; ++} ++ ++void HalSetBrateCfg( ++ IN PADAPTER Adapter, ++ IN u8 *mBratesOS, ++ OUT u16 *pBrateCfg) ++{ ++ u8 i, is_brate, brate; ++ ++ for(i=0;ieeprompriv.mac_addr); ++#ifdef CONFIG_CONCURRENT_MODE ++ if (adapter->pbuddy_adapter) ++ rtw_hal_set_hwreg(adapter->pbuddy_adapter, HW_VAR_MAC_ADDR, adapter->pbuddy_adapter->eeprompriv.mac_addr); ++#endif ++} ++ ++/* ++* C2H event format: ++* Field TRIGGER CONTENT CMD_SEQ CMD_LEN CMD_ID ++* BITS [127:120] [119:16] [15:8] [7:4] [3:0] ++*/ ++ ++void c2h_evt_clear(_adapter *adapter) ++{ ++ rtw_write8(adapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE); ++} ++ ++s32 c2h_evt_read(_adapter *adapter, u8 *buf) ++{ ++ s32 ret = _FAIL; ++ struct c2h_evt_hdr *c2h_evt; ++ int i; ++ u8 trigger; ++ ++ if (buf == NULL) ++ goto exit; ++ ++ trigger = rtw_read8(adapter, REG_C2HEVT_CLEAR); ++ ++ if (trigger == C2H_EVT_HOST_CLOSE) { ++ goto exit; /* Not ready */ ++ } else if (trigger != C2H_EVT_FW_CLOSE) { ++ goto clear_evt; /* Not a valid value */ ++ } ++ ++ c2h_evt = (struct c2h_evt_hdr *)buf; ++ ++ _rtw_memset(c2h_evt, 0, 16); ++ ++ *buf = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL); ++ *(buf+1) = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1); ++ ++ RT_PRINT_DATA(_module_hal_init_c_, _drv_info_, "c2h_evt_read(): ", ++ &c2h_evt , sizeof(c2h_evt)); ++ ++ if (0) { ++ DBG_871X("%s id:%u, len:%u, seq:%u, trigger:0x%02x\n", __func__ ++ , c2h_evt->id, c2h_evt->plen, c2h_evt->seq, trigger); ++ } ++ ++ /* Read the content */ ++ for (i = 0; i < c2h_evt->plen; i++) ++ c2h_evt->payload[i] = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + sizeof(*c2h_evt) + i); ++ ++ RT_PRINT_DATA(_module_hal_init_c_, _drv_info_, "c2h_evt_read(): Command Content:\n", ++ c2h_evt->payload, c2h_evt->plen); ++ ++ ret = _SUCCESS; ++ ++clear_evt: ++ /* ++ * Clear event to notify FW we have read the command. ++ * If this field isn't clear, the FW won't update the next command message. ++ */ ++ c2h_evt_clear(adapter); ++exit: ++ return ret; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/hal_intf.c b/drivers/net/wireless/realtek/rtl8192cu/hal/hal_intf.c +new file mode 100644 +index 000000000000..fd1e888598b5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/hal_intf.c +@@ -0,0 +1,545 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#define _HAL_INTF_C_ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#ifdef CONFIG_SDIO_HCI ++ #include ++#elif defined(CONFIG_USB_HCI) ++ #include ++#elif defined(CONFIG_GSPI_HCI) ++ #include ++#endif ++ ++void rtw_hal_chip_configure(_adapter *padapter) ++{ ++ if(padapter->HalFunc.intf_chip_configure) ++ padapter->HalFunc.intf_chip_configure(padapter); ++} ++ ++void rtw_hal_read_chip_info(_adapter *padapter) ++{ ++ if(padapter->HalFunc.read_adapter_info) ++ padapter->HalFunc.read_adapter_info(padapter); ++} ++ ++void rtw_hal_read_chip_version(_adapter *padapter) ++{ ++ if(padapter->HalFunc.read_chip_version) ++ padapter->HalFunc.read_chip_version(padapter); ++} ++ ++void rtw_hal_def_value_init(_adapter *padapter) ++{ ++ if(padapter->HalFunc.init_default_value) ++ padapter->HalFunc.init_default_value(padapter); ++} ++ ++void rtw_hal_free_data(_adapter *padapter) ++{ ++ if(padapter->HalFunc.free_hal_data) ++ padapter->HalFunc.free_hal_data(padapter); ++} ++ ++void rtw_hal_dm_init(_adapter *padapter) ++{ ++ if(padapter->HalFunc.dm_init) ++ padapter->HalFunc.dm_init(padapter); ++} ++ ++void rtw_hal_dm_deinit(_adapter *padapter) ++{ ++ // cancel dm timer ++ if(padapter->HalFunc.dm_deinit) ++ padapter->HalFunc.dm_deinit(padapter); ++} ++ ++void rtw_hal_sw_led_init(_adapter *padapter) ++{ ++ if(padapter->HalFunc.InitSwLeds) ++ padapter->HalFunc.InitSwLeds(padapter); ++} ++ ++void rtw_hal_sw_led_deinit(_adapter *padapter) ++{ ++ if(padapter->HalFunc.DeInitSwLeds) ++ padapter->HalFunc.DeInitSwLeds(padapter); ++} ++ ++uint rtw_hal_init(_adapter *padapter) ++{ ++ uint status = _SUCCESS; ++ ++ if(padapter->hw_init_completed == _TRUE) ++ { ++ DBG_871X("rtw_hal_init: hw_init_completed == _TRUE\n"); ++ goto success; ++ } ++#ifdef CONFIG_DEINIT_BEFORE_INIT ++ status = padapter->HalFunc.hal_deinit(padapter); ++ if(status != _SUCCESS){ ++ DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!\n"); ++ goto fail; ++ } ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ // before init mac0, driver must init mac1 first to avoid usb rx error. ++ if((padapter->pbuddy_adapter != NULL) && (padapter->DualMacConcurrent == _TRUE) ++ && (padapter->adapter_type == PRIMARY_ADAPTER)) ++ { ++ if(padapter->pbuddy_adapter->hw_init_completed == _TRUE) ++ { ++ DBG_871X("rtw_hal_init: pbuddy_adapter hw_init_completed == _TRUE\n"); ++ } ++ else ++ { ++#ifdef CONFIG_DEINIT_BEFORE_INIT ++ status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter); ++ if(status != _SUCCESS){ ++ DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n"); ++ goto fail; ++ } ++#endif ++ status = padapter->HalFunc.hal_init(padapter->pbuddy_adapter); ++ if(status == _SUCCESS){ ++ padapter->pbuddy_adapter->hw_init_completed = _TRUE; ++ } ++ else{ ++ padapter->pbuddy_adapter->hw_init_completed = _FALSE; ++ RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail(pbuddy_adapter)\n")); ++ goto fail; ++ } ++ } ++ } ++#else ++ if(adapter_to_dvobj(padapter)->DualMacMode == _TRUE) ++ { ++ if(padapter->pbuddy_adapter != NULL) { ++ if(padapter->pbuddy_adapter->hw_init_completed == _FALSE) ++ { ++#ifdef CONFIG_DEINIT_BEFORE_INIT ++ status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter); ++ if(status != _SUCCESS){ ++ DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n"); ++ goto fail; ++ } ++#endif ++ status = padapter->HalFunc.hal_init(padapter->pbuddy_adapter); ++ if(status == _SUCCESS){ ++ padapter->pbuddy_adapter->hw_init_completed = _TRUE; ++ } ++ else{ ++ padapter->pbuddy_adapter->hw_init_completed = _FALSE; ++ RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail for another interface\n")); ++ } ++ } ++ } ++ } ++#endif ++ ++ padapter->hw_init_completed=_FALSE; ++ ++ status = padapter->HalFunc.hal_init(padapter); ++ ++ if(status == _SUCCESS){ ++ padapter->hw_init_completed = _TRUE; ++ } ++ else{ ++ padapter->hw_init_completed = _FALSE; ++ RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail\n")); ++ goto fail; ++ } ++ ++success: ++ ++ if (padapter->registrypriv.notch_filter == 1) ++ rtw_hal_notch_filter(padapter, 1); ++ ++ rtw_hal_reset_security_engine(padapter); ++ ++ rtw_sec_restore_wep_key(padapter); ++ ++ init_hw_mlme_ext(padapter); ++ ++fail: ++ ++ RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status)); ++ ++ return status; ++} ++ ++uint rtw_hal_deinit(_adapter *padapter) ++{ ++ uint status = _SUCCESS; ++ ++_func_enter_; ++ ++ status = padapter->HalFunc.hal_deinit(padapter); ++ ++ if(status == _SUCCESS){ ++ padapter->hw_init_completed = _FALSE; ++ } ++ else ++ { ++ RT_TRACE(_module_hal_init_c_,_drv_err_,("\n rtw_hal_deinit: hal_init fail\n")); ++ } ++ ++_func_exit_; ++ ++ return status; ++} ++ ++void rtw_hal_set_hwreg(_adapter *padapter, u8 variable, u8 *val) ++{ ++ if (padapter->HalFunc.SetHwRegHandler) ++ padapter->HalFunc.SetHwRegHandler(padapter, variable, val); ++} ++ ++void rtw_hal_get_hwreg(_adapter *padapter, u8 variable, u8 *val) ++{ ++ if (padapter->HalFunc.GetHwRegHandler) ++ padapter->HalFunc.GetHwRegHandler(padapter, variable, val); ++} ++ ++u8 rtw_hal_set_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue) ++{ ++ if(padapter->HalFunc.SetHalDefVarHandler) ++ return padapter->HalFunc.SetHalDefVarHandler(padapter,eVariable,pValue); ++ return _FAIL; ++} ++ ++u8 rtw_hal_get_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue) ++{ ++ if(padapter->HalFunc.GetHalDefVarHandler) ++ return padapter->HalFunc.GetHalDefVarHandler(padapter,eVariable,pValue); ++ return _FAIL; ++} ++ ++void rtw_hal_enable_interrupt(_adapter *padapter) ++{ ++ if (padapter->HalFunc.enable_interrupt) ++ padapter->HalFunc.enable_interrupt(padapter); ++ else ++ DBG_871X("%s: HalFunc.enable_interrupt is NULL!\n", __FUNCTION__); ++ ++} ++void rtw_hal_disable_interrupt(_adapter *padapter) ++{ ++ if (padapter->HalFunc.disable_interrupt) ++ padapter->HalFunc.disable_interrupt(padapter); ++ else ++ DBG_871X("%s: HalFunc.disable_interrupt is NULL!\n", __FUNCTION__); ++ ++} ++ ++u32 rtw_hal_inirp_init(_adapter *padapter) ++{ ++ u32 rst = _FAIL; ++ if(padapter->HalFunc.inirp_init) ++ rst = padapter->HalFunc.inirp_init(padapter); ++ else ++ DBG_871X(" %s HalFunc.inirp_init is NULL!!!\n",__FUNCTION__); ++ return rst; ++} ++ ++u32 rtw_hal_inirp_deinit(_adapter *padapter) ++{ ++ ++ if(padapter->HalFunc.inirp_deinit) ++ return padapter->HalFunc.inirp_deinit(padapter); ++ ++ return _FAIL; ++ ++} ++ ++u8 rtw_hal_intf_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id, u8* val) ++{ ++ if(padapter->HalFunc.interface_ps_func) ++ return padapter->HalFunc.interface_ps_func(padapter,efunc_id,val); ++ return _FAIL; ++} ++ ++s32 rtw_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ if(padapter->HalFunc.hal_xmitframe_enqueue) ++ return padapter->HalFunc.hal_xmitframe_enqueue(padapter, pxmitframe); ++ ++ return _FALSE; ++} ++ ++s32 rtw_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ if(padapter->HalFunc.hal_xmit) ++ return padapter->HalFunc.hal_xmit(padapter, pxmitframe); ++ ++ return _FALSE; ++} ++ ++s32 rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe) ++{ ++ s32 ret = _FAIL; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ _rtw_memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN); ++ ++#ifdef CONFIG_IEEE80211W ++ if(padapter->securitypriv.binstallBIPkey == _TRUE) ++ { ++ if(IS_MCAST(pmgntframe->attrib.ra)) ++ { ++ pmgntframe->attrib.encrypt = _BIP_; ++ //pmgntframe->attrib.bswenc = _TRUE; ++ } ++ else ++ { ++ pmgntframe->attrib.encrypt = _AES_; ++ pmgntframe->attrib.bswenc = _TRUE; ++ } ++ rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe); ++ } ++#endif //CONFIG_IEEE80211W ++ ++ if(padapter->HalFunc.mgnt_xmit) ++ ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe); ++ return ret; ++} ++ ++s32 rtw_hal_init_xmit_priv(_adapter *padapter) ++{ ++ if(padapter->HalFunc.init_xmit_priv != NULL) ++ return padapter->HalFunc.init_xmit_priv(padapter); ++ return _FAIL; ++} ++ ++void rtw_hal_free_xmit_priv(_adapter *padapter) ++{ ++ if(padapter->HalFunc.free_xmit_priv != NULL) ++ padapter->HalFunc.free_xmit_priv(padapter); ++} ++ ++s32 rtw_hal_init_recv_priv(_adapter *padapter) ++{ ++ if(padapter->HalFunc.init_recv_priv) ++ return padapter->HalFunc.init_recv_priv(padapter); ++ ++ return _FAIL; ++} ++ ++void rtw_hal_free_recv_priv(_adapter *padapter) ++{ ++ if(padapter->HalFunc.free_recv_priv) ++ padapter->HalFunc.free_recv_priv(padapter); ++} ++ ++void rtw_hal_update_ra_mask(_adapter *padapter, u32 mac_id) ++{ ++ if(padapter->HalFunc.UpdateRAMaskHandler) ++ padapter->HalFunc.UpdateRAMaskHandler(padapter,mac_id); ++} ++ ++void rtw_hal_add_ra_tid(_adapter *padapter, u32 bitmap, u8 arg) ++{ ++ if(padapter->HalFunc.Add_RateATid) ++ padapter->HalFunc.Add_RateATid(padapter, bitmap, arg); ++} ++ ++u32 rtw_hal_read_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask) ++{ ++ u32 data = 0; ++ if (padapter->HalFunc.read_bbreg) ++ data = padapter->HalFunc.read_bbreg(padapter, RegAddr, BitMask); ++ return data; ++} ++ ++void rtw_hal_write_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask, u32 Data) ++{ ++ if (padapter->HalFunc.write_bbreg) ++ padapter->HalFunc.write_bbreg(padapter, RegAddr, BitMask, Data); ++} ++ ++u32 rtw_hal_read_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask) ++{ ++ u32 data = 0; ++ if (padapter->HalFunc.read_rfreg) ++ data = padapter->HalFunc.read_rfreg(padapter, eRFPath, RegAddr, BitMask); ++ return data; ++} ++ ++void rtw_hal_write_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data) ++{ ++ if (padapter->HalFunc.write_rfreg) ++ padapter->HalFunc.write_rfreg(padapter, eRFPath, RegAddr, BitMask, Data); ++} ++ ++s32 rtw_hal_interrupt_handler(_adapter *padapter) ++{ ++ if(padapter->HalFunc.interrupt_handler) ++ return padapter->HalFunc.interrupt_handler(padapter); ++ return _FAIL; ++} ++ ++void rtw_hal_set_bwmode(_adapter *padapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset) ++{ ++ if(padapter->HalFunc.set_bwmode_handler) ++ padapter->HalFunc.set_bwmode_handler(padapter, Bandwidth, Offset); ++} ++ ++void rtw_hal_set_chan(_adapter *padapter, u8 channel) ++{ ++ if(padapter->HalFunc.set_channel_handler) ++ padapter->HalFunc.set_channel_handler(padapter, channel); ++} ++ ++void rtw_hal_dm_watchdog(_adapter *padapter) ++{ ++ if(padapter->HalFunc.hal_dm_watchdog) ++ padapter->HalFunc.hal_dm_watchdog(padapter); ++} ++ ++void rtw_hal_bcn_related_reg_setting(_adapter *padapter) ++{ ++ if(padapter->HalFunc.SetBeaconRelatedRegistersHandler) ++ padapter->HalFunc.SetBeaconRelatedRegistersHandler(padapter); ++} ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++u8 rtw_hal_antdiv_before_linked(_adapter *padapter) ++{ ++ if (padapter->HalFunc.AntDivBeforeLinkHandler) ++ return padapter->HalFunc.AntDivBeforeLinkHandler(padapter); ++ return _FALSE; ++} ++ ++void rtw_hal_antdiv_rssi_compared(_adapter *padapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src) ++{ ++ if (padapter->HalFunc.AntDivCompareHandler) ++ padapter->HalFunc.AntDivCompareHandler(padapter, dst, src); ++} ++#endif ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtw_hal_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt) ++{ ++ if (padapter->HalFunc.hostap_mgnt_xmit_entry) ++ return padapter->HalFunc.hostap_mgnt_xmit_entry(padapter, pkt); ++ return _FAIL; ++} ++#endif //CONFIG_HOSTAPD_MLME ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++void rtw_hal_sreset_init(_adapter *padapter) ++{ ++ if(padapter->HalFunc.sreset_init_value) ++ padapter->HalFunc.sreset_init_value(padapter); ++} ++ ++void rtw_hal_sreset_reset(_adapter *padapter) ++{ ++ padapter = GET_PRIMARY_ADAPTER(padapter); ++ ++ if(padapter->HalFunc.silentreset) ++ padapter->HalFunc.silentreset(padapter); ++} ++ ++void rtw_hal_sreset_reset_value(_adapter *padapter) ++{ ++ if(padapter->HalFunc.sreset_reset_value) ++ padapter->HalFunc.sreset_reset_value(padapter); ++} ++ ++void rtw_hal_sreset_xmit_status_check(_adapter *padapter) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->adapter_type != PRIMARY_ADAPTER) ++ return; ++#endif ++ if(padapter->HalFunc.sreset_xmit_status_check) ++ padapter->HalFunc.sreset_xmit_status_check(padapter); ++} ++ ++void rtw_hal_sreset_linked_status_check(_adapter *padapter) ++{ ++ if(padapter->HalFunc.sreset_linked_status_check) ++ padapter->HalFunc.sreset_linked_status_check(padapter); ++} ++ ++u8 rtw_hal_sreset_get_wifi_status(_adapter *padapter) ++{ ++ u8 status = 0; ++ if(padapter->HalFunc.sreset_get_wifi_status) ++ status = padapter->HalFunc.sreset_get_wifi_status(padapter); ++ return status; ++} ++ ++bool rtw_hal_sreset_inprogress(_adapter *padapter) ++{ ++ bool inprogress = _FALSE; ++ ++ padapter = GET_PRIMARY_ADAPTER(padapter); ++ ++ if(padapter->HalFunc.sreset_inprogress) ++ inprogress = padapter->HalFunc.sreset_inprogress(padapter); ++ return inprogress; ++} ++#endif //DBG_CONFIG_ERROR_DETECT ++ ++#ifdef CONFIG_IOL ++int rtw_hal_iol_cmd(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms) ++{ ++ if (adapter->HalFunc.IOL_exec_cmds_sync) ++ return adapter->HalFunc.IOL_exec_cmds_sync(adapter, xmit_frame, max_wating_ms); ++ return _FAIL; ++} ++#endif ++ ++void rtw_hal_notch_filter(_adapter *adapter, bool enable) ++{ ++ if(adapter->HalFunc.hal_notch_filter) ++ adapter->HalFunc.hal_notch_filter(adapter,enable); ++} ++ ++void rtw_hal_reset_security_engine(_adapter * adapter) ++{ ++ if(adapter->HalFunc.hal_reset_security_engine) ++ adapter->HalFunc.hal_reset_security_engine(adapter); ++} ++ ++s32 rtw_hal_c2h_handler(_adapter *adapter, struct c2h_evt_hdr *c2h_evt) ++{ ++ s32 ret = _FAIL; ++ if (adapter->HalFunc.c2h_handler) ++ ret = adapter->HalFunc.c2h_handler(adapter, c2h_evt); ++ return ret; ++} ++ ++c2h_id_filter rtw_hal_c2h_id_filter_ccx(_adapter *adapter) ++{ ++ return adapter->HalFunc.c2h_id_filter_ccx; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c +new file mode 100644 +index 000000000000..27e8d54c0f63 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c +@@ -0,0 +1,1154 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192C_CMD_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++ ++#define RTL92C_MAX_H2C_BOX_NUMS 4 ++#define RTL92C_MAX_CMD_LEN 5 ++#define MESSAGE_BOX_SIZE 4 ++#define EX_MESSAGE_BOX_SIZE 2 ++ ++static u8 _is_fw_read_cmd_down(_adapter* padapter, u8 msgbox_num) ++{ ++ u8 read_down = _FALSE; ++ int retry_cnts = 100; ++ ++ u8 valid; ++ ++// DBG_8192C(" _is_fw_read_cmd_down ,isnormal_chip(%x),reg_1cc(%x),msg_box(%d)...\n",isvern,rtw_read8(padapter,REG_HMETFR),msgbox_num); ++ ++ do{ ++ valid = rtw_read8(padapter,REG_HMETFR) & BIT(msgbox_num); ++ if(0 == valid ){ ++ read_down = _TRUE; ++ } ++ }while( (!read_down) && (retry_cnts--)); ++ ++ return read_down; ++ ++} ++ ++ ++/***************************************** ++* H2C Msg format : ++*| 31 - 8 |7 | 6 - 0 | ++*| h2c_msg |Ext_bit |CMD_ID | ++* ++******************************************/ ++int rtl8192c_FillH2CCmd(_adapter* padapter, u8 ElementID, u32 CmdLen, u8* pCmdBuffer) ++{ ++ u8 bcmd_down = _FALSE; ++ int retry_cnts = 100; ++ u8 h2c_box_num; ++ u32 msgbox_addr; ++ u32 msgbox_ex_addr; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ u32 h2c_cmd = 0; ++ u16 h2c_cmd_ex = 0; ++ int ret = _FAIL; ++ ++_func_enter_; ++ ++ padapter = GET_PRIMARY_ADAPTER(padapter); ++ pHalData = GET_HAL_DATA(padapter); ++ ++ if(padapter->bFWReady == _FALSE) ++ { ++ DBG_8192C("FillH2CCmd(): return H2C cmd because fw is not ready\n"); ++ return ret; ++ } ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->h2c_fwcmd_mutex), NULL); ++ ++ if(!pCmdBuffer){ ++ goto exit; ++ } ++ if(CmdLen > RTL92C_MAX_CMD_LEN){ ++ goto exit; ++ } ++ //pay attention to if race condition happened in H2C cmd setting. ++ do{ ++ h2c_box_num = pHalData->LastHMEBoxNum; ++ ++ if(!_is_fw_read_cmd_down(padapter, h2c_box_num)){ ++ DBG_8192C(" fw read cmd failed...\n"); ++ goto exit; ++ } ++ ++ if(CmdLen<=3) ++ { ++ _rtw_memcpy((u8*)(&h2c_cmd)+1, pCmdBuffer, CmdLen ); ++ } ++ else{ ++ _rtw_memcpy((u8*)(&h2c_cmd_ex), pCmdBuffer, EX_MESSAGE_BOX_SIZE); ++ _rtw_memcpy((u8*)(&h2c_cmd)+1, pCmdBuffer+2,( CmdLen-EX_MESSAGE_BOX_SIZE)); ++ *(u8*)(&h2c_cmd) |= BIT(7); ++ } ++ ++ *(u8*)(&h2c_cmd) |= ElementID; ++ ++ if(h2c_cmd & BIT(7)){ ++ msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num *EX_MESSAGE_BOX_SIZE); ++ h2c_cmd_ex = cpu_to_le16( h2c_cmd_ex ); ++ rtw_write16(padapter, msgbox_ex_addr, h2c_cmd_ex); ++ } ++ msgbox_addr =REG_HMEBOX_0 + (h2c_box_num *MESSAGE_BOX_SIZE); ++ h2c_cmd = cpu_to_le32( h2c_cmd ); ++ rtw_write32(padapter,msgbox_addr, h2c_cmd); ++ ++ bcmd_down = _TRUE; ++ ++ // DBG_8192C("MSG_BOX:%d,CmdLen(%d), reg:0x%x =>h2c_cmd:0x%x, reg:0x%x =>h2c_cmd_ex:0x%x ..\n" ++ // ,pHalData->LastHMEBoxNum ,CmdLen,msgbox_addr,h2c_cmd,msgbox_ex_addr,h2c_cmd_ex); ++ ++ pHalData->LastHMEBoxNum = (h2c_box_num+1) % RTL92C_MAX_H2C_BOX_NUMS ; ++ ++ }while((!bcmd_down) && (retry_cnts--)); ++/* ++ if(bcmd_down) ++ DBG_8192C("H2C Cmd exe down. \n" ); ++ else ++ DBG_8192C("H2C Cmd exe failed. \n" ); ++*/ ++ ret = _SUCCESS; ++ ++exit: ++ ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->h2c_fwcmd_mutex), NULL); ++ ++_func_exit_; ++ ++ return ret; ++ ++} ++ ++u8 rtl8192c_h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf) ++{ ++ u8 ElementID, CmdLen; ++ u8 *pCmdBuffer; ++ struct cmd_msg_parm *pcmdmsg; ++ ++ if(!pbuf) ++ return H2C_PARAMETERS_ERROR; ++ ++ pcmdmsg = (struct cmd_msg_parm*)pbuf; ++ ElementID = pcmdmsg->eid; ++ CmdLen = pcmdmsg->sz; ++ pCmdBuffer = pcmdmsg->buf; ++ ++ rtl8192c_FillH2CCmd(padapter, ElementID, CmdLen, pCmdBuffer); ++ ++ return H2C_SUCCESS; ++} ++ ++#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED) ++u8 rtl8192c_set_FwSelectSuspend_cmd(_adapter *padapter ,u8 bfwpoll, u16 period) ++{ ++ u8 res=_SUCCESS; ++ struct H2C_SS_RFOFF_PARAM param; ++ DBG_8192C("==>%s bfwpoll(%x)\n",__FUNCTION__,bfwpoll); ++ param.gpio_period = period;//Polling GPIO_11 period time ++ param.ROFOn = (_TRUE == bfwpoll)?1:0; ++ rtl8192c_FillH2CCmd(padapter, SELECTIVE_SUSPEND_ROF_CMD, sizeof(param), (u8*)(¶m)); ++ return res; ++} ++#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED ++ ++u8 rtl8192c_set_rssi_cmd(_adapter*padapter, u8 *param) ++{ ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ *((u32*) param ) = cpu_to_le32( *((u32*) param ) ); ++ ++ rtl8192c_FillH2CCmd(padapter, RSSI_SETTING_EID, 3, param); ++ ++_func_exit_; ++ ++ return res; ++} ++ ++u8 rtl8192c_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg) ++{ ++ u8 buf[5]; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ _rtw_memset(buf, 0, 5); ++ mask = cpu_to_le32( mask ); ++ _rtw_memcpy(buf, &mask, 4); ++ buf[4] = arg; ++ ++ rtl8192c_FillH2CCmd(padapter, MACID_CONFIG_EID, 5, buf); ++ ++_func_exit_; ++ ++ return res; ++ ++} ++ ++//bitmap[0:27] = tx_rate_bitmap ++//bitmap[28:31]= Rate Adaptive id ++//arg[0:4] = macid ++//arg[5] = Short GI ++void rtl8192c_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg) ++{ ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ if(pHalData->fw_ractrl == _TRUE) ++ { ++ rtl8192c_set_raid_cmd(pAdapter, bitmap, arg); ++ } ++ else ++ { ++ u8 macid, init_rate, shortGIrate=_FALSE; ++ ++ init_rate = get_highest_rate_idx(bitmap&0x0fffffff)&0x3f; ++ ++ macid = arg&0x1f; ++ ++ shortGIrate = (arg&BIT(5)) ? _TRUE:_FALSE; ++ ++ if (shortGIrate==_TRUE) ++ init_rate |= BIT(6); ++ ++ rtw_write8(pAdapter, (REG_INIDATA_RATE_SEL+macid), (u8)init_rate); ++ } ++ ++} ++ ++void rtl8192c_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode) ++{ ++ SETPWRMODE_PARM H2CSetPwrMode; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++_func_enter_; ++ ++ DBG_871X("%s(): Mode = %d, SmartPS = %d\n", __FUNCTION__,Mode,pwrpriv->smart_ps); ++ ++ H2CSetPwrMode.Mode = Mode; ++ ++ H2CSetPwrMode.SmartPS = pwrpriv->smart_ps; ++ ++ H2CSetPwrMode.BcnPassTime = 1;//pPSC->RegMaxLPSAwakeIntvl; ++ ++ rtl8192c_FillH2CCmd(padapter, SET_PWRMODE_EID, sizeof(H2CSetPwrMode), (u8 *)&H2CSetPwrMode); ++ ++_func_exit_; ++} ++ ++void ConstructBeacon(_adapter *padapter, u8 *pframe, u32 *pLength) ++{ ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ u32 rate_len, pktlen; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/); ++ //pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_BEACON); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pktlen = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ //timestamp will be inserted by hardware ++ pframe += 8; ++ pktlen += 8; ++ ++ // beacon interval: 2 bytes ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pktlen += 2; ++ ++ // capability info: 2 bytes ++ _rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2); ++ ++ pframe += 2; ++ pktlen += 2; ++ ++ if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) ++ { ++ //DBG_871X("ie len=%d\n", cur_network->IELength); ++ pktlen += cur_network->IELength - sizeof(NDIS_802_11_FIXED_IEs); ++ _rtw_memcpy(pframe, cur_network->IEs+sizeof(NDIS_802_11_FIXED_IEs), pktlen); ++ ++ goto _ConstructBeacon; ++ } ++ ++ //below for ad-hoc mode ++ ++ // SSID ++ pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pktlen); ++ ++ // supported rates... ++ rate_len = rtw_get_rateset_len(cur_network->SupportedRates); ++ pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pktlen); ++ ++ // DS parameter set ++ pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen); ++ ++ if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ++ { ++ u32 ATIMWindow; ++ // IBSS Parameter Set... ++ //ATIMWindow = cur->Configuration.ATIMWindow; ++ ATIMWindow = 0; ++ pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pktlen); ++ } ++ ++ ++ //todo: ERP IE ++ ++ ++ // EXTERNDED SUPPORTED RATE ++ if (rate_len > 8) ++ { ++ pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pktlen); ++ } ++ ++ ++ //todo:HT for adhoc ++ ++_ConstructBeacon: ++ ++ if ((pktlen + TXDESC_SIZE) > 512) ++ { ++ DBG_871X("beacon frame too large\n"); ++ return; ++ } ++ ++ *pLength = pktlen; ++ ++ //DBG_871X("%s bcn_sz=%d\n", __FUNCTION__, pktlen); ++ ++} ++ ++void ConstructPSPoll(_adapter *padapter, u8 *pframe, u32 *pLength) ++{ ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ u32 pktlen; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ // Frame control. ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ SetPwrMgt(fctrl); ++ SetFrameSubType(pframe, WIFI_PSPOLL); ++ ++ // AID. ++ SetDuration(pframe, (pmlmeinfo->aid | 0xc000)); ++ ++ // BSSID. ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ // TA. ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ ++ *pLength = 16; ++} ++ ++void ConstructNullFunctionData(_adapter *padapter, u8 *pframe, u32 *pLength, u8 *StaAddr, BOOLEAN bForcePowerSave) ++{ ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ u32 pktlen; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *cur_network = &pmlmepriv->cur_network; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //DBG_871X("%s:%d\n", __FUNCTION__, bForcePowerSave); ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ if (bForcePowerSave) ++ { ++ SetPwrMgt(fctrl); ++ } ++ ++ switch(cur_network->network.InfrastructureMode) ++ { ++ case Ndis802_11Infrastructure: ++ SetToDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, StaAddr, ETH_ALEN); ++ break; ++ case Ndis802_11APMode: ++ SetFrDs(fctrl); ++ _rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ break; ++ case Ndis802_11IBSS: ++ default: ++ _rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ break; ++ } ++ ++ SetSeqNum(pwlanhdr, 0); ++ ++ SetFrameSubType(pframe, WIFI_DATA_NULL); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ *pLength = pktlen; ++} ++ ++void ConstructProbeRsp(_adapter *padapter, u8 *pframe, u32 *pLength, u8 *StaAddr, BOOLEAN bHideSSID) ++{ ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ u16 *fctrl; ++ u8 *mac, *bssid; ++ u32 pktlen; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++ ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ mac = myid(&(padapter->eeprompriv)); ++ bssid = cur_network->MacAddress; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ _rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, bssid, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, 0); ++ SetFrameSubType(fctrl, WIFI_PROBERSP); ++ ++ pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ pframe += pktlen; ++ ++ if(cur_network->IELength>MAX_IE_SZ) ++ return; ++ ++ _rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength); ++ pframe += cur_network->IELength; ++ pktlen += cur_network->IELength; ++ ++ *pLength = pktlen; ++} ++ ++// ++// Description: In normal chip, we should send some packet to Hw which will be used by Fw ++// in FW LPS mode. The function is to fill the Tx descriptor of this packets, then ++// Fw can tell Hw to send these packet derectly. ++// Added by tynli. 2009.10.15. ++// ++static VOID ++FillFakeTxDescriptor92C( ++ IN PADAPTER Adapter, ++ IN u8* pDesc, ++ IN u32 BufferLen, ++ IN BOOLEAN IsPsPoll ++) ++{ ++ struct tx_desc *ptxdesc = (struct tx_desc *)pDesc; ++ ++ // Clear all status ++ _rtw_memset(pDesc, 0, 32); ++ ++ //offset 0 ++ ptxdesc->txdw0 |= cpu_to_le32( OWN | FSG | LSG); //own, bFirstSeg, bLastSeg; ++ ++ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<txdw0 |= cpu_to_le32(BufferLen&0x0000ffff); // Buffer size + command header ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT<txdw1 |= cpu_to_le32(NAVUSEHDR); ++ } ++ else ++ { ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number ++ ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29. ++ } ++ ++ //offset 16 ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++#ifdef CONFIG_USB_HCI ++ // USB interface drop packet if the checksum of descriptor isn't correct. ++ // Using this checksum can let hardware recovery from packet bulk out error (e.g. Cancel URC, Bulk out error.). ++ rtl8192cu_cal_txdesc_chksum(ptxdesc); ++#endif ++ ++ //RT_PRINT_DATA(COMP_CMD, DBG_TRACE, "TxFillCmdDesc8192C(): H2C Tx Cmd Content ----->\n", pDesc, TX_DESC_SIZE); ++} ++ ++// To check if reserved page content is destroyed by beacon beacuse beacon is too large. ++// 2010.06.23. Added by tynli. ++VOID ++CheckFwRsvdPageContent( ++ IN PADAPTER Adapter ++) ++{ ++ HAL_DATA_TYPE* pHalData = GET_HAL_DATA(Adapter); ++ u32 MaxBcnPageNum; ++ ++ if(pHalData->FwRsvdPageStartOffset != 0) ++ { ++ /*MaxBcnPageNum = PageNum_128(pMgntInfo->MaxBeaconSize); ++ RT_ASSERT((MaxBcnPageNum <= pHalData->FwRsvdPageStartOffset), ++ ("CheckFwRsvdPageContent(): The reserved page content has been"\ ++ "destroyed by beacon!!! MaxBcnPageNum(%d) FwRsvdPageStartOffset(%d)\n!", ++ MaxBcnPageNum, pHalData->FwRsvdPageStartOffset));*/ ++ } ++} ++ ++// ++// Description: Fill the reserved packets that FW will use to RSVD page. ++// Now we just send 4 types packet to rsvd page. ++// (1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. ++// Input: ++// bDLFinished - FALSE: At the first time we will send all the packets as a large packet to Hw, ++// so we need to set the packet length to total lengh. ++// TRUE: At the second time, we should send the first packet (default:beacon) ++// to Hw again and set the lengh in descriptor to the real beacon lengh. ++// 2009.10.15 by tynli. ++static void SetFwRsvdPagePkt(PADAPTER Adapter, BOOLEAN bDLFinished) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ struct xmit_priv *pxmitpriv = &(Adapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(Adapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u32 BeaconLength, ProbeRspLength, PSPollLength, NullFunctionDataLength; ++ u8 *ReservedPagePacket; ++ u8 PageNum=0, U1bTmp, TxDescLen=0, TxDescOffset=0; ++ u16 BufIndex=0; ++ u32 TotalPacketLen; ++ RSVDPAGE_LOC RsvdPageLoc; ++ BOOLEAN bDLOK = _FALSE; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ ReservedPagePacket = (u8*)rtw_malloc(1000); ++ if(ReservedPagePacket == NULL){ ++ DBG_871X("%s(): alloc ReservedPagePacket fail !!!\n", __FUNCTION__); ++ return; ++ } ++ ++ _rtw_memset(ReservedPagePacket, 0, 1000); ++ ++ TxDescLen = 32;//TX_DESC_SIZE; ++ ++#ifdef CONFIG_USB_HCI ++ BufIndex = TXDESC_OFFSET; ++ TxDescOffset = TxDescLen+8; //Shift index for 8 bytes because the dummy bytes in the first descipstor. ++#else ++ BufIndex = 0; ++ TxDescOffset = 0; ++#endif ++ ++ //(1) beacon ++ ConstructBeacon(Adapter,&ReservedPagePacket[BufIndex],&BeaconLength); ++ ++ //DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: BCN\n", &ReservedPagePacket[BufIndex], (BeaconLength+BufIndex)); ++ ++//-------------------------------------------------------------------- ++ ++ // When we count the first page size, we need to reserve description size for the RSVD ++ // packet, it will be filled in front of the packet in TXPKTBUF. ++ U1bTmp = (u8)PageNum_128(BeaconLength+TxDescLen); ++ PageNum += U1bTmp; ++ // To reserved 2 pages for beacon buffer. 2010.06.24. ++ if(PageNum == 1) ++ PageNum+=1; ++ pHalData->FwRsvdPageStartOffset = PageNum; ++ ++ BufIndex = (PageNum*128) + TxDescOffset; ++ ++ //(2) ps-poll ++ ConstructPSPoll(Adapter, &ReservedPagePacket[BufIndex],&PSPollLength); ++ ++ FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], PSPollLength, _TRUE); ++ ++ //DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: PS-POLL\n", &ReservedPagePacket[BufIndex-TxDescLen], (PSPollLength+TxDescLen)); ++ ++ RsvdPageLoc.LocPsPoll = PageNum; ++ ++//------------------------------------------------------------------ ++ ++ U1bTmp = (u8)PageNum_128(PSPollLength+TxDescLen); ++ PageNum += U1bTmp; ++ ++ BufIndex = (PageNum*128) + TxDescOffset; ++ ++ //(3) null data ++ ConstructNullFunctionData( ++ Adapter, ++ &ReservedPagePacket[BufIndex], ++ &NullFunctionDataLength, ++ get_my_bssid(&(pmlmeinfo->network)), ++ _FALSE); ++ ++ FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], NullFunctionDataLength, _FALSE); ++ ++ RsvdPageLoc.LocNullData = PageNum; ++ ++ //DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: NULL DATA \n", &ReservedPagePacket[BufIndex-TxDescLen], (NullFunctionDataLength+TxDescLen)); ++//------------------------------------------------------------------ ++ ++ U1bTmp = (u8)PageNum_128(NullFunctionDataLength+TxDescLen); ++ PageNum += U1bTmp; ++ ++ BufIndex = (PageNum*128) + TxDescOffset; ++ ++ //(4) probe response ++ ConstructProbeRsp( ++ Adapter, ++ &ReservedPagePacket[BufIndex], ++ &ProbeRspLength, ++ get_my_bssid(&(pmlmeinfo->network)), ++ _FALSE); ++ ++ FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], ProbeRspLength, _FALSE); ++ ++ RsvdPageLoc.LocProbeRsp = PageNum; ++ ++ //DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: PROBE RSP \n", &ReservedPagePacket[BufIndex-TxDescLen], (ProbeRspLength-TxDescLen)); ++ ++//------------------------------------------------------------------ ++ ++ U1bTmp = (u8)PageNum_128(ProbeRspLength+TxDescLen); ++ ++ PageNum += U1bTmp; ++ ++ TotalPacketLen = (PageNum*128); ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(Adapter, pattrib); ++ pattrib->qsel = 0x10; ++ pattrib->pktlen = pattrib->last_txcmdsz = TotalPacketLen - TxDescLen; ++ _rtw_memcpy(pmgntframe->buf_addr, ReservedPagePacket, TotalPacketLen); ++ ++ rtw_hal_mgnt_xmit(Adapter, pmgntframe); ++ ++ bDLOK = _TRUE; ++ ++ if(bDLOK) ++ { ++ DBG_871X("Set RSVD page location to Fw.\n"); ++ rtl8192c_FillH2CCmd(Adapter, RSVD_PAGE_EID, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc); ++ } ++ ++ rtw_mfree(ReservedPagePacket,1000); ++ ++} ++ ++void rtl8192c_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus) ++{ ++ JOINBSSRPT_PARM JoinBssRptParm; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++_func_enter_; ++ ++ DBG_871X("%s mstatus(%x)\n", __FUNCTION__,mstatus); ++ ++ if(mstatus == 1) ++ { ++ BOOLEAN bRecover = _FALSE; ++ ++ // We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. ++ // Suggested by filen. Added by tynli. ++ rtw_write16(padapter, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid)); ++ // Do not set TSF again here or vWiFi beacon DMA INT will not work. ++ //correct_TSF(padapter, pmlmeext); ++ // Hw sequende enable by dedault. 2010.06.23. by tynli. ++ //rtw_write16(padapter, REG_NQOS_SEQ, ((pmlmeext->mgnt_seq+100)&0xFFF)); ++ //rtw_write8(padapter, REG_HWSEQ_CTRL, 0xFF); ++ ++ //set REG_CR bit 8 ++ //U1bTmp = rtw_read8(padapter, REG_CR+1); ++ rtw_write8(padapter, REG_CR+1, 0x03); ++ ++ // Disable Hw protection for a time which revserd for Hw sending beacon. ++ // Fix download reserved page packet fail that access collision with the protection time. ++ // 2010.05.11. Added by tynli. ++ //SetBcnCtrlReg(padapter, 0, BIT3); ++ //SetBcnCtrlReg(padapter, BIT4, 0); ++ rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(3))); ++ rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(4)); ++ ++ // Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. ++ if(pHalData->RegFwHwTxQCtrl&BIT6) ++ bRecover = _TRUE; ++ ++ // To tell Hw the packet is not a real beacon frame. ++ //U1bTmp = rtw_read8(padapter, REG_FWHW_TXQ_CTRL+2); ++ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl&(~BIT6))); ++ pHalData->RegFwHwTxQCtrl &= (~BIT6); ++ SetFwRsvdPagePkt(padapter, 0); ++ ++ // 2010.05.11. Added by tynli. ++ //SetBcnCtrlReg(padapter, BIT3, 0); ++ //SetBcnCtrlReg(padapter, 0, BIT4); ++ rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(3)); ++ rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(4))); ++ ++ // To make sure that if there exists an adapter which would like to send beacon. ++ // If exists, the origianl value of 0x422[6] will be 1, we should check this to ++ // prevent from setting 0x422[6] to 0 after download reserved page, or it will cause ++ // the beacon cannot be sent by HW. ++ // 2010.06.23. Added by tynli. ++ if(bRecover) ++ { ++ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl|BIT6)); ++ pHalData->RegFwHwTxQCtrl |= BIT6; ++ } ++ ++ // Clear CR[8] or beacon packet will not be send to TxBuf anymore. ++ rtw_write8(padapter, REG_CR+1, 0x02); ++ } ++ ++ JoinBssRptParm.OpMode = mstatus; ++ ++ rtl8192c_FillH2CCmd(padapter, JOINBSS_RPT_EID, sizeof(JoinBssRptParm), (u8 *)&JoinBssRptParm); ++ ++_func_exit_; ++} ++ ++#ifdef CONFIG_P2P_PS ++void rtl8192c_set_p2p_ctw_period_cmd(_adapter* padapter, u8 ctwindow) ++{ ++ struct P2P_PS_CTWPeriod_t p2p_ps_ctw; ++ ++ p2p_ps_ctw.CTWPeriod = ctwindow; ++ ++ rtl8192c_FillH2CCmd(padapter, P2P_PS_CTW_CMD_EID, 1, (u8 *)(&p2p_ps_ctw)); ++ ++} ++ ++void rtl8192c_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ struct P2P_PS_Offload_t *p2p_ps_offload = &pHalData->p2p_ps_offload; ++ u8 i; ++ u16 ctwindow; ++ u32 start_time, tsf_low; ++ ++_func_enter_; ++ ++ switch(p2p_ps_state) ++ { ++ case P2P_PS_DISABLE: ++ DBG_8192C("P2P_PS_DISABLE \n"); ++ _rtw_memset(p2p_ps_offload, 0 ,1); ++ break; ++ case P2P_PS_ENABLE: ++ DBG_8192C("P2P_PS_ENABLE \n"); ++ // update CTWindow value. ++ if( pwdinfo->ctwindow > 0 ) ++ { ++ p2p_ps_offload->CTWindow_En = 1; ++ ctwindow = pwdinfo->ctwindow; ++ if(IS_HARDWARE_TYPE_8723A(padapter)) ++ { ++ //rtw_write16(padapter, REG_ATIMWND, ctwindow); ++ } ++ else ++ { ++ rtl8192c_set_p2p_ctw_period_cmd(padapter, ctwindow); ++ } ++ } ++ ++ // hw only support 2 set of NoA ++ for( i=0 ; inoa_num ; i++) ++ { ++ // To control the register setting for which NOA ++ rtw_write8(padapter, 0x5CF, (i << 4)); ++ if(i == 0) ++ p2p_ps_offload->NoA0_En = 1; ++ else ++ p2p_ps_offload->NoA1_En = 1; ++ ++ // config P2P NoA Descriptor Register ++ rtw_write32(padapter, 0x5E0, pwdinfo->noa_duration[i]); ++ ++ rtw_write32(padapter, 0x5E4, pwdinfo->noa_interval[i]); ++ ++ //Get Current TSF value ++ tsf_low = rtw_read32(padapter, REG_TSFTR); ++ ++ start_time = pwdinfo->noa_start_time[i]; ++ if(pwdinfo->noa_count[i] != 1) ++ { ++ while( start_time <= (tsf_low+(50*1024) ) ) ++ { ++ start_time += pwdinfo->noa_interval[i]; ++ if(pwdinfo->noa_count[i] != 255) ++ pwdinfo->noa_count[i]--; ++ } ++ } ++ //DBG_8192C("%s(): start_time = %x\n",__FUNCTION__,start_time); ++ rtw_write32(padapter, 0x5E8, start_time); ++ ++ rtw_write8(padapter, 0x5EC, pwdinfo->noa_count[i]); ++ } ++ ++ if( (pwdinfo->opp_ps == 1) || (pwdinfo->noa_num > 0) ) ++ { ++ // rst p2p circuit ++ rtw_write8(padapter, REG_DUAL_TSF_RST, BIT(4)); ++ ++ p2p_ps_offload->Offload_En = 1; ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ p2p_ps_offload->role= 1; ++ p2p_ps_offload->AllStaSleep = 0; ++ } ++ else ++ { ++ p2p_ps_offload->role= 0; ++ } ++ ++ p2p_ps_offload->discovery = 0; ++ } ++ break; ++ case P2P_PS_SCAN: ++ DBG_8192C("P2P_PS_SCAN \n"); ++ p2p_ps_offload->discovery = 1; ++ break; ++ case P2P_PS_SCAN_DONE: ++ DBG_8192C("P2P_PS_SCAN_DONE \n"); ++ p2p_ps_offload->discovery = 0; ++ pwdinfo->p2p_ps_state = P2P_PS_ENABLE; ++ break; ++ default: ++ break; ++ } ++ ++ rtl8192c_FillH2CCmd(padapter, P2P_PS_OFFLOAD_EID, 1, (u8 *)p2p_ps_offload); ++ ++_func_exit_; ++ ++} ++#endif // CONFIG_P2P_PS ++ ++#ifdef CONFIG_IOL ++#include ++int rtl8192c_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms) ++{ ++ IO_OFFLOAD_LOC IoOffloadLoc; ++ u32 start_time = rtw_get_current_time(); ++ u32 passing_time_ms; ++ u8 polling_ret; ++ int ret = _FAIL; ++ ++ if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS) ++ goto exit; ++ ++ dump_mgntframe_and_wait(adapter, xmit_frame, max_wating_ms); ++ ++ IoOffloadLoc.LocCmd = 0; ++ if(_SUCCESS != rtl8192c_FillH2CCmd(adapter, H2C_92C_IO_OFFLOAD, sizeof(IO_OFFLOAD_LOC), (u8 *)&IoOffloadLoc)) ++ goto exit; ++ ++ //polling if the IO offloading is done ++ while( (passing_time_ms=rtw_get_passing_time_ms(start_time)) <= max_wating_ms) { ++ #if 0 //C2H ++ if(0xff == rtw_read8(adapter, REG_C2HEVT_CLEAR)) ++ break; ++ #else// 0x1c3 ++ if(0x00 != (polling_ret=rtw_read8(adapter, 0x1c3))) ++ break; ++ #endif ++ rtw_msleep_os(5); ++ } ++ #if 0 //debug ++ DBG_871X("IOL %s, polling_ret:0x%02x, 0x1c0=0x%08x, 0x1c4=0x%08x, 0x1cc=0x%08x, 0x1e8=0x%08x, 0x130=0x%08x, 0x134=0x%08x\n" ++ , polling_ret==0xff?"success":"error" ++ , polling_ret ++ , rtw_read32(adapter, 0x1c0) ++ , rtw_read32(adapter, 0x1c4) ++ , rtw_read32(adapter, 0x1cc) ++ , rtw_read32(adapter, 0x1e8) ++ , rtw_read32(adapter, 0x130) ++ , rtw_read32(adapter, 0x134) ++ ); ++ rtw_write32(adapter, 0x1c0, 0x0); ++ #endif ++ ++ if(polling_ret == 0xff) ++ ret =_SUCCESS; ++ else { ++ DBG_871X("IOL %s, polling_ret:0x%02x\n" ++ //", 0x1c0=0x%08x, 0x1c4=0x%08x, 0x1cc=0x%08x, 0x1e8=0x%08x, 0x130=0x%08x, 0x134=0x%08x\n" ++ , polling_ret==0xff?"success":"error" ++ , polling_ret ++ //, rtw_read32(adapter, 0x1c0) ++ //, rtw_read32(adapter, 0x1c4) ++ //, rtw_read32(adapter, 0x1cc) ++ //, rtw_read32(adapter, 0x1e8) ++ //, rtw_read32(adapter, 0x130) ++ //, rtw_read32(adapter, 0x134) ++ ); ++ #if 0 //debug ++ rtw_write16(adapter, 0x1c4, 0x0000); ++ rtw_msleep_os(10); ++ DBG_871X("after reset, 0x1c4=0x%08x\n", rtw_read32(adapter, 0x1c4)); ++ #endif ++ ++ } ++ ++ { ++ #if 0 //C2H ++ u32 c2h_evt; ++ int i; ++ c2h_evt = rtw_read32(adapter, REG_C2HEVT_MSG_NORMAL); ++ DBG_871X("%s io-offloading complete, in %ums: 0x%08x\n", __FUNCTION__, passing_time_ms, c2h_evt); ++ rtw_write8(adapter, REG_C2HEVT_CLEAR, 0x0); ++ #else// 0x1c3 ++ DBG_871X("IOL %s complete in %ums\n", __FUNCTION__, passing_time_ms); ++ rtw_write8(adapter, 0x1c3, 0x0); ++ #endif ++ } ++ ++exit: ++ return ret; ++ ++} ++#endif //CONFIG_IOL ++ ++ ++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD ++/* ++ rtl8192c_dis_beacon_fun_cmd() ++ This function shall only be called by PORT1. ++ PORT0's beacon function can't be disabled, because it's used by RA function in FW/HW. ++ ++ // Still has the REG_BCN_CTRL_1 modified by unknowned party issue in case of Primary Interface + PORT1 combination. ++*/ ++u8 rtl8192c_dis_beacon_fun_cmd(_adapter* padapter) ++{ ++ u8 buf[2]; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ ++ _rtw_memset(buf, 0, sizeof(buf)); ++ ++ if (padapter->iface_type == IFACE_PORT0) { ++ //buf[0] = 0x1; ++ DBG_871X("%s(): ERROR! padapter->iface_type = %d\n", __FUNCTION__, padapter->iface_type); ++ return _FAIL; ++ } else ++ buf[1] = 0x1; ++ ++ rtl8192c_FillH2CCmd(padapter, H2C_92C_DISABLE_BCN_FUNC, 2, buf); ++ ++_func_exit_; ++ ++ return res; ++ ++} ++#endif // CONFIG_BEACON_DISABLE_OFFLOAD ++ ++ ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++/* ++ ask FW to Reset sync register at Beacon early interrupt ++*/ ++u8 rtl8192c_reset_tsf(_adapter *padapter, u8 reset_port ) ++{ ++ u8 buf[2]; ++ u8 res=_SUCCESS; ++ ++_func_enter_; ++ if (IFACE_PORT0==reset_port) { ++ buf[0] = 0x1; buf[1] = 0; ++ ++ } else{ ++ buf[0] = 0x0; buf[1] = 0x1; ++ } ++ rtl8192c_FillH2CCmd(padapter, H2C_92C_RESET_TSF, 2, buf); ++_func_exit_; ++ ++ return res; ++} ++ ++int reset_tsf(PADAPTER Adapter, u8 reset_port ) ++{ ++ u8 reset_cnt_before = 0, reset_cnt_after = 0, loop_cnt = 0; ++ u32 reg_reset_tsf_cnt = (IFACE_PORT0==reset_port) ? ++ REG_FW_RESET_TSF_CNT_0:REG_FW_RESET_TSF_CNT_1; ++ ++ rtw_scan_abort(Adapter->pbuddy_adapter); /* site survey will cause reset_tsf fail */ ++ reset_cnt_after = reset_cnt_before = rtw_read8(Adapter,reg_reset_tsf_cnt); ++ rtl8192c_reset_tsf(Adapter, reset_port); ++ ++ while ((reset_cnt_after == reset_cnt_before ) && (loop_cnt < 10)) { ++ rtw_msleep_os(100); ++ loop_cnt++; ++ reset_cnt_after = rtw_read8(Adapter, reg_reset_tsf_cnt); ++ } ++ ++ return(loop_cnt >= 10) ? _FAIL : _TRUE; ++} ++ ++ ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ ++#ifdef CONFIG_WOWLAN ++ ++void rtl8192c_set_wowlan_cmd(_adapter* padapter) ++{ ++ u8 res=_SUCCESS; ++ SETWOWLAN_PARM pwowlan_parm; ++ struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv; ++ ++_func_enter_; ++ ++ pwowlan_parm.mode =0; ++ pwowlan_parm.gpio_index=0; ++ pwowlan_parm.gpio_duration=0; ++ pwowlan_parm.second_mode =0; ++ pwowlan_parm.reserve=0; ++ ++ if(pwrpriv->wowlan_mode ==_TRUE){ ++ pwowlan_parm.mode |=FW_WOWLAN_FUN_EN; ++ //printk("\n %s 1.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode ); ++ if(pwrpriv->wowlan_pattern ==_TRUE){ ++ pwowlan_parm.mode |= FW_WOWLAN_PATTERN_MATCH; ++ //printk("\n %s 2.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode ); ++ } ++ if(pwrpriv->wowlan_magic ==_TRUE){ ++ pwowlan_parm.mode |=FW_WOWLAN_MAGIC_PKT; ++ //printk("\n %s 3.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode ); ++ } ++ if(pwrpriv->wowlan_unicast ==_TRUE){ ++ pwowlan_parm.mode |=FW_WOWLAN_UNICAST; ++ //printk("\n %s 4.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode ); ++ } ++ //WOWLAN_GPIO_ACTIVE means GPIO high active ++ //pwowlan_parm.mode |=FW_WOWLAN_GPIO_ACTIVE; ++ pwowlan_parm.mode |=FW_WOWLAN_REKEY_WAKEUP; ++ pwowlan_parm.mode |=FW_WOWLAN_DEAUTH_WAKEUP; ++ ++ rtl8192c_set_FwJoinBssReport_cmd( padapter, 1); ++ ++ //GPIO3 ++ pwowlan_parm.gpio_index=3; ++ ++ //duration unit is 64us ++ pwowlan_parm.gpio_duration=0xff; ++ // ++ pwowlan_parm.second_mode|=FW_WOWLAN_GPIO_WAKEUP_EN; ++ //printk("\n %s 5.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode ); ++ { u8 *ptr=(u8 *)&pwowlan_parm; ++ printk("\n %s H2C_WO_WLAN=%x %02x:%02x:%02x:%02x:%02x \n",__FUNCTION__,H2C_WO_WLAN_CMD,ptr[0],ptr[1],ptr[2],ptr[3],ptr[4] ); ++ } ++ rtl8192c_FillH2CCmd(padapter, H2C_WO_WLAN_CMD, 4, (u8 *)&pwowlan_parm); ++ ++ //keep alive period = 3 * 10 BCN interval ++ pwowlan_parm.mode =3; ++ pwowlan_parm.gpio_index=3; ++ rtl8192c_FillH2CCmd(padapter, KEEP_ALIVE_CONTROL_CMD, 2, (u8 *)&pwowlan_parm); ++ printk("%s after KEEP_ALIVE_CONTROL_CMD register 0x81=%x \n",__FUNCTION__,rtw_read8(padapter, 0x81)); ++ ++ pwowlan_parm.mode =1; ++ pwowlan_parm.gpio_index=0; ++ pwowlan_parm.gpio_duration=0; ++ rtl8192c_FillH2CCmd(padapter, DISCONNECT_DECISION_CTRL_CMD, 3, (u8 *)&pwowlan_parm); ++ printk("%s after DISCONNECT_DECISION_CTRL_CMD register 0x81=%x \n",__FUNCTION__,rtw_read8(padapter, 0x81)); ++ ++ //enable GPIO wakeup ++ pwowlan_parm.mode =1; ++ pwowlan_parm.gpio_index=0; ++ pwowlan_parm.gpio_duration=0; ++ rtl8192c_FillH2CCmd(padapter, REMOTE_WAKE_CTRL_CMD, 3, (u8 *)&pwowlan_parm); ++ } ++ else ++ rtl8192c_FillH2CCmd(padapter, H2C_WO_WLAN_CMD, 3, (u8 *)&pwowlan_parm); ++ ++ ++_func_exit_; ++ ++ return ; ++ ++} ++ ++#endif //CONFIG_WOWLAN +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c +new file mode 100644 +index 000000000000..98d6f1439971 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c +@@ -0,0 +1,5055 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++//============================================================ ++// Description: ++// ++// This file is for 92CE/92CU dynamic mechanism only ++// ++// ++//============================================================ ++ ++//============================================================ ++// include files ++//============================================================ ++#include ++#include ++#include ++#include ++ ++#include ++#include "../dm.h" ++#ifdef CONFIG_INTEL_PROXIM ++#include "../proxim/intel_proxim.h" ++#endif ++//============================================================ ++// Global var ++//============================================================ ++static u32 EDCAParam[maxAP][3] = ++{ // UL DL ++ {0x5ea322, 0x00a630, 0x00a44f}, //atheros AP ++ {0x5ea32b, 0x5ea42b, 0x5e4322}, //broadcom AP ++ {0x3ea430, 0x00a630, 0x3ea44f}, //cisco AP ++ {0x5ea44f, 0x00a44f, 0x5ea42b}, //marvell AP ++ {0x5ea422, 0x00a44f, 0x00a44f}, //ralink AP ++ //{0x5ea44f, 0x5ea44f, 0x5ea44f}, //realtek AP ++ {0xa44f, 0x5ea44f, 0x5e431c}, //realtek AP ++ {0x5ea42b, 0xa630, 0x5e431c}, //airgocap AP ++ {0x5ea42b, 0x5ea42b, 0x5ea42b}, //unknown AP ++// {0x5e4322, 0x00a44f, 0x5ea44f}, //unknown AP ++}; ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: dm_DIGInit() ++ * ++ * Overview: Set DIG scheme init value. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * ++ *---------------------------------------------------------------------------*/ ++static void dm_DIGInit( ++ IN PADAPTER pAdapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ ++ pDigTable->Dig_Enable_Flag = _TRUE; ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX; ++ ++ pDigTable->CurIGValue = 0x20; ++ pDigTable->PreIGValue = 0x0; ++ ++ pDigTable->CurSTAConnectState = pDigTable->PreSTAConnectState = DIG_STA_DISCONNECT; ++ pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_DISCONNECT; ++ ++ pDigTable->RssiLowThresh = DM_DIG_THRESH_LOW; ++ pDigTable->RssiHighThresh = DM_DIG_THRESH_HIGH; ++ ++ pDigTable->FALowThresh = DM_FALSEALARM_THRESH_LOW; ++ pDigTable->FAHighThresh = DM_FALSEALARM_THRESH_HIGH; ++ ++ ++ pDigTable->rx_gain_range_max = DM_DIG_MAX; ++ pDigTable->rx_gain_range_min = DM_DIG_MIN; ++ pDigTable->rx_gain_range_min_nolink = 0; ++ ++ pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT; ++ pDigTable->BackoffVal_range_max = DM_DIG_BACKOFF_MAX; ++ pDigTable->BackoffVal_range_min = DM_DIG_BACKOFF_MIN; ++ ++ pDigTable->PreCCKPDState = CCK_PD_STAGE_MAX; ++ pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi; ++ ++ pDigTable->ForbiddenIGI = DM_DIG_MIN; ++ pDigTable->LargeFAHit = 0; ++ pDigTable->Recover_cnt = 0; ++ pdmpriv->DIG_Dynamic_MIN = 0x25; //for FUNAI_TV ++} ++ ++ ++static u8 dm_initial_gain_MinPWDB( ++ IN PADAPTER pAdapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ int Rssi_val_min = 0; ++ ++ if((pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT) && ++ (pDigTable->CurSTAConnectState == DIG_STA_CONNECT) ) ++ { ++ if(pdmpriv->EntryMinUndecoratedSmoothedPWDB != 0) ++#ifdef CONFIG_CONCURRENT_MODE ++ Rssi_val_min = (pdmpriv->UndecoratedSmoothedPWDB+pdmpriv->EntryMinUndecoratedSmoothedPWDB)/2; ++#else ++ Rssi_val_min = (pdmpriv->EntryMinUndecoratedSmoothedPWDB > pdmpriv->UndecoratedSmoothedPWDB)? ++ pdmpriv->UndecoratedSmoothedPWDB:pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++#endif //CONFIG_CONCURRENT_MODE ++ else ++ Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB; ++ } ++ else if(pDigTable->CurSTAConnectState == DIG_STA_CONNECT || ++ pDigTable->CurSTAConnectState == DIG_STA_BEFORE_CONNECT) ++ Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB; ++ else if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT) ++ Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ ++ //printk("%s CurMultiSTAConnectState(0x%02x) UndecoratedSmoothedPWDB(%d),EntryMinUndecoratedSmoothedPWDB(%d)\n" ++ //,__FUNCTION__,pDigTable->CurSTAConnectState, ++ //pdmpriv->UndecoratedSmoothedPWDB,pdmpriv->EntryMinUndecoratedSmoothedPWDB); ++ ++ return (u8)Rssi_val_min; ++} ++ ++ ++static VOID ++dm_FalseAlarmCounterStatistics( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 ret_value; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; ++#endif //CONFIG_CONCURRENT_MODE ++ ++ ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter1, bMaskDWord); ++ FalseAlmCnt->Cnt_Parity_Fail = ((ret_value&0xffff0000)>>16); ++ ++ ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter2, bMaskDWord); ++ FalseAlmCnt->Cnt_Rate_Illegal = (ret_value&0xffff); ++ FalseAlmCnt->Cnt_Crc8_fail = ((ret_value&0xffff0000)>>16); ++ ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter3, bMaskDWord); ++ FalseAlmCnt->Cnt_Mcs_fail = (ret_value&0xffff); ++ ret_value = PHY_QueryBBReg(Adapter, rOFDM0_FrameSync, bMaskDWord); ++ FalseAlmCnt->Cnt_Fast_Fsync = (ret_value&0xffff); ++ FalseAlmCnt->Cnt_SB_Search_fail = ((ret_value&0xffff0000)>>16); ++ ++ FalseAlmCnt->Cnt_Ofdm_fail = FalseAlmCnt->Cnt_Parity_Fail + FalseAlmCnt->Cnt_Rate_Illegal + ++ FalseAlmCnt->Cnt_Crc8_fail + FalseAlmCnt->Cnt_Mcs_fail+ ++ FalseAlmCnt->Cnt_Fast_Fsync + FalseAlmCnt->Cnt_SB_Search_fail; ++ ++ ++ //hold cck counter ++ PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, BIT(14), 1); ++ ++ ret_value = PHY_QueryBBReg(Adapter, rCCK0_FACounterLower, bMaskByte0); ++ FalseAlmCnt->Cnt_Cck_fail = ret_value; ++ ++ ret_value = PHY_QueryBBReg(Adapter, rCCK0_FACounterUpper, bMaskByte3); ++ FalseAlmCnt->Cnt_Cck_fail += (ret_value& 0xff)<<8; ++ ++ FalseAlmCnt->Cnt_all = ( FalseAlmCnt->Cnt_Parity_Fail + ++ FalseAlmCnt->Cnt_Rate_Illegal + ++ FalseAlmCnt->Cnt_Crc8_fail + ++ FalseAlmCnt->Cnt_Mcs_fail + ++ FalseAlmCnt->Cnt_Cck_fail); ++ ++ Adapter->recvpriv.FalseAlmCnt_all = FalseAlmCnt->Cnt_all; ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_adapter) ++ pbuddy_adapter->recvpriv.FalseAlmCnt_all = FalseAlmCnt->Cnt_all; ++#endif //CONFIG_CONCURRENT_MODE ++ ++ //reset false alarm counter registers ++ PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0x08000000, 1); ++ PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0x08000000, 0); ++ //reset cck counter ++ PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, 0x0000c000, 0); ++ //enable cck counter ++ PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, 0x0000c000, 2); ++ ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("Cnt_Parity_Fail = %ld, Cnt_Rate_Illegal = %ld, Cnt_Crc8_fail = %ld, Cnt_Mcs_fail = %ld\n", ++ // FalseAlmCnt->Cnt_Parity_Fail, FalseAlmCnt->Cnt_Rate_Illegal, FalseAlmCnt->Cnt_Crc8_fail, FalseAlmCnt->Cnt_Mcs_fail) ); ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("Cnt_Ofdm_fail = %ld, Cnt_Cck_fail = %ld, Cnt_all = %ld\n", ++ // FalseAlmCnt->Cnt_Ofdm_fail, FalseAlmCnt->Cnt_Cck_fail, FalseAlmCnt->Cnt_all) ); ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("Cnt_Ofdm_fail = %ld, Cnt_Cck_fail = %ld, Cnt_all = %ld\n", ++ // FalseAlmCnt->Cnt_Ofdm_fail, FalseAlmCnt->Cnt_Cck_fail, FalseAlmCnt->Cnt_all) ); ++} ++ ++ ++static VOID ++DM_Write_DIG( ++ IN PADAPTER pAdapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(rtw_buddy_adapter_up(pAdapter)) ++ { ++ PADAPTER pbuddy_adapter = pAdapter->pbuddy_adapter; ++ PHAL_DATA_TYPE pbuddy_HalData = GET_HAL_DATA(pbuddy_adapter); ++ struct dm_priv *pbuddy_dmpriv = &pbuddy_HalData->dmpriv; ++ DIG_T *pbuddy_DigTable = &pbuddy_dmpriv->DM_DigTable; ++ ++ //sync IGValue ++ pbuddy_DigTable->PreIGValue = pDigTable->PreIGValue; ++ pbuddy_DigTable->CurIGValue = pDigTable->CurIGValue; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("CurIGValue = 0x%lx, PreIGValue = 0x%lx, BackoffVal = %d\n", ++ // DM_DigTable.CurIGValue, DM_DigTable.PreIGValue, DM_DigTable.BackoffVal)); ++ ++ if (pDigTable->Dig_Enable_Flag == _FALSE) ++ { ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("DIG is disabled\n")); ++ pDigTable->PreIGValue = 0x17; ++ return; ++ } ++ ++ if( (pDigTable->PreIGValue != pDigTable->CurIGValue) || ( pAdapter->bForceWriteInitGain ) ) ++ { ++ // Set initial gain. ++ //PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, pDigTable->CurIGValue); ++ //PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, pDigTable->CurIGValue); ++ //printk("%s DIG(0x%02x)\n",__FUNCTION__,pDigTable->CurIGValue); ++ ++#if defined CONFIG_WIDI_DIG_3E && defined CONFIG_INTEL_WIDI ++ if( pAdapter->mlmepriv.widi_enable == _TRUE ) ++ { ++ PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, 0x7f, 0x3e); ++ PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, 0x7f, 0x3e); ++ } ++ else ++#endif //defined CONFIG_WIDI_DIG_3E && defined CONFIG_INTEL_WIDI ++ { ++ PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, 0x7f, pDigTable->CurIGValue); ++ PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, 0x7f, pDigTable->CurIGValue); ++ } ++ pDigTable->PreIGValue = pDigTable->CurIGValue; ++ } ++} ++ ++ ++static VOID ++dm_CtrlInitGainByFA( ++ IN PADAPTER pAdapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++ ++ u8 value_IGI = pDigTable->CurIGValue; ++ ++ if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH0) ++ value_IGI --; ++ else if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH1) ++ value_IGI += 0; ++ else if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH2) ++ value_IGI ++; ++ else if(FalseAlmCnt->Cnt_all >= DM_DIG_FA_TH2) ++ value_IGI +=2; ++ ++ if(value_IGI > DM_DIG_FA_UPPER) ++ value_IGI = DM_DIG_FA_UPPER; ++ if(value_IGI < DM_DIG_FA_LOWER) ++ value_IGI = DM_DIG_FA_LOWER; ++ ++ if(FalseAlmCnt->Cnt_all > 10000) ++ value_IGI = DM_DIG_FA_UPPER; ++ ++ pDigTable->CurIGValue = value_IGI; ++ ++ DM_Write_DIG(pAdapter); ++ ++} ++ ++#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV ++VOID dm_CtrlInitGainByRssi( IN PADAPTER pAdapter) ++{ ++ ++ u32 isBT; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++#ifdef CONFIG_DM_ADAPTIVITY ++ u8 Adap_IGI_Upper = pdmpriv->IGI_target + 30 + (u8) pdmpriv->TH_L2H_ini -(u8) pdmpriv->TH_EDCCA_HL_diff; ++#endif ++ ++ //modify DIG upper bound ++ if((pDigTable->Rssi_val_min + 20) > DM_DIG_MAX ) ++ pDigTable->rx_gain_range_max = DM_DIG_MAX; ++ else ++ pDigTable->rx_gain_range_max = pDigTable->Rssi_val_min + 20; ++ ++ //modify DIG lower bound ++ if((FalseAlmCnt->Cnt_all > 500)&&(pdmpriv->DIG_Dynamic_MIN < 0x25)) ++ pdmpriv->DIG_Dynamic_MIN++; ++ if((FalseAlmCnt->Cnt_all < 500)&&(pdmpriv->DIG_Dynamic_MIN > DM_DIG_MIN)) ++ pdmpriv->DIG_Dynamic_MIN--; ++ if((pDigTable->Rssi_val_min < 8) && (pdmpriv->DIG_Dynamic_MIN > DM_DIG_MIN)) ++ pdmpriv->DIG_Dynamic_MIN--; ++ ++ //modify DIG lower bound, deal with abnorally large false alarm ++ if(FalseAlmCnt->Cnt_all > 10000) ++ { ++ //RT_TRACE(COMP_DIG, DBG_LOUD, ("dm_DIG(): Abnornally false alarm case. \n")); ++ pDigTable->LargeFAHit++; ++ if(pDigTable->ForbiddenIGI < pDigTable->CurIGValue) ++ { ++ pDigTable->ForbiddenIGI = pDigTable->CurIGValue; ++ pDigTable->LargeFAHit = 1; ++ } ++ if(pDigTable->LargeFAHit >= 3) ++ { ++ if((pDigTable->ForbiddenIGI+1) >pDigTable->rx_gain_range_max) ++ pDigTable->rx_gain_range_min = pDigTable->rx_gain_range_max; ++ else ++ pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1); ++ pDigTable->Recover_cnt = 3600; //3600=2hr ++ } ++ } ++ else ++ { ++ //Recovery mechanism for IGI lower bound ++ if(pDigTable->Recover_cnt != 0){ ++ pDigTable->Recover_cnt --; ++ } ++ else ++ { ++ if(pDigTable->LargeFAHit == 0 ) ++ { ++ if((pDigTable->ForbiddenIGI -1) < pdmpriv->DIG_Dynamic_MIN) //DM_DIG_MIN) ++ { ++ pDigTable->ForbiddenIGI = pdmpriv->DIG_Dynamic_MIN; //DM_DIG_MIN; ++ pDigTable->rx_gain_range_min = pdmpriv->DIG_Dynamic_MIN; //DM_DIG_MIN; ++ } ++ else ++ { ++ pDigTable->ForbiddenIGI --; ++ pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1); ++ } ++ } ++ else if(pDigTable->LargeFAHit == 3 ) ++ { ++ pDigTable->LargeFAHit = 0; ++ } ++ } ++ } ++ #ifdef CONFIG_USB_HCI ++ if(FalseAlmCnt->Cnt_all < 250) ++ { ++#endif ++ //DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by SS mode\n"); ++ ++ isBT = rtw_read8(pAdapter, 0x4fd) & 0x01; ++ ++ if(!isBT){ ++ ++ if(FalseAlmCnt->Cnt_all > pDigTable->FAHighThresh) ++ { ++ if((pDigTable->BackoffVal -2) < pDigTable->BackoffVal_range_min) ++ pDigTable->BackoffVal = pDigTable->BackoffVal_range_min; ++ else ++ pDigTable->BackoffVal -= 2; ++ } ++ else if(FalseAlmCnt->Cnt_all < pDigTable->FALowThresh) ++ { ++ if((pDigTable->BackoffVal+2) > pDigTable->BackoffVal_range_max) ++ pDigTable->BackoffVal = pDigTable->BackoffVal_range_max; ++ else ++ pDigTable->BackoffVal +=2; ++ } ++ } ++ else ++ pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT; ++ ++ pDigTable->CurIGValue = pDigTable->Rssi_val_min+10-pDigTable->BackoffVal; ++ ++ //DBG_8192C("Rssi_val_min = %x BackoffVal %x\n",pDigTable->Rssi_val_min, pDigTable->BackoffVal); ++#ifdef CONFIG_USB_HCI ++ } ++ else ++ { ++ //DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by FA mode\n"); ++ //DBG_8192C("RSSI = 0x%x", pDigTable->Rssi_val_min); ++ ++ //Adjust initial gain by false alarm ++ if(FalseAlmCnt->Cnt_all > 1000) ++ pDigTable->CurIGValue = pDigTable ->PreIGValue+2; ++ else if (FalseAlmCnt->Cnt_all > 750) ++ pDigTable->CurIGValue = pDigTable->PreIGValue+1; ++ else if(FalseAlmCnt->Cnt_all < 500) ++ pDigTable->CurIGValue = pDigTable->PreIGValue-1; ++ } ++#endif ++ ++ //Check initial gain by upper/lower bound ++ if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_max; ++ ++ if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_min; ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ if(pdmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY) ++ { ++ if(pDigTable->CurIGValue > Adap_IGI_Upper) ++ pDigTable->CurIGValue = Adap_IGI_Upper; ++ ++ if(pdmpriv->IGI_LowerBound != 0) ++ { ++ if(pDigTable->CurIGValue < pdmpriv->IGI_LowerBound) ++ pDigTable->CurIGValue = pdmpriv->IGI_LowerBound; ++ } ++ LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT": pdmpriv->IGI_LowerBound = %d\n", ++ FUNC_ADPT_ARG(pAdapter), pdmpriv->IGI_LowerBound); ++ } ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ ++ //printk("%s => rx_gain_range_max(0x%02x) rx_gain_range_min(0x%02x)\n",__FUNCTION__, ++ // pDigTable->rx_gain_range_max,pDigTable->rx_gain_range_min); ++ //printk("%s CurIGValue(0x%02x) <====\n",__FUNCTION__,pDigTable->CurIGValue ); ++ ++ DM_Write_DIG(pAdapter); ++ ++} ++#else ++static VOID dm_CtrlInitGainByRssi(IN PADAPTER pAdapter) ++{ ++ u32 isBT; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++ u8 RSSI_tmp = dm_initial_gain_MinPWDB(pAdapter); ++#ifdef CONFIG_DM_ADAPTIVITY ++ u8 Adap_IGI_Upper = pdmpriv->IGI_target + 30 + (u8) pdmpriv->TH_L2H_ini -(u8) pdmpriv->TH_EDCCA_HL_diff; ++#endif ++ ++ //modify DIG upper bound ++ if((pDigTable->Rssi_val_min + 20) > DM_DIG_MAX ) ++ pDigTable->rx_gain_range_max = DM_DIG_MAX; ++ else ++ pDigTable->rx_gain_range_max = pDigTable->Rssi_val_min + 20; ++ //printk("%s Rssi_val_min(0x%02x),rx_gain_range_max(0x%02x)\n",__FUNCTION__,pDigTable->Rssi_val_min,pDigTable->rx_gain_range_max); ++ //modify DIG lower bound, deal with abnorally large false alarm ++ if(FalseAlmCnt->Cnt_all > 10000) ++ { ++ //RT_TRACE(COMP_DIG, DBG_LOUD, ("dm_DIG(): Abnornally false alarm case. \n")); ++ ++ pDigTable->LargeFAHit++; ++ if(pDigTable->ForbiddenIGI < pDigTable->CurIGValue) ++ { ++ pDigTable->ForbiddenIGI = pDigTable->CurIGValue; ++ pDigTable->LargeFAHit = 1; ++ } ++ ++ if(pDigTable->LargeFAHit >= 3) ++ { ++ if((pDigTable->ForbiddenIGI+1) > pDigTable->rx_gain_range_max) ++ pDigTable->rx_gain_range_min = pDigTable->rx_gain_range_max; ++ else ++ pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1); ++ pDigTable->Recover_cnt = 3600; //3600=2hr ++ } ++ } ++ else ++ { ++ //Recovery mechanism for IGI lower bound ++ if(pDigTable->Recover_cnt != 0) ++ pDigTable->Recover_cnt --; ++ else ++ { ++ if(pDigTable->LargeFAHit == 0 ) ++ { ++ if((pDigTable->ForbiddenIGI -1) < DM_DIG_MIN) ++ { ++ pDigTable->ForbiddenIGI = DM_DIG_MIN; ++ pDigTable->rx_gain_range_min = DM_DIG_MIN; ++ } ++ else ++ { ++ pDigTable->ForbiddenIGI --; ++ pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1); ++ } ++ } ++ else if(pDigTable->LargeFAHit == 3 ) ++ { ++ pDigTable->LargeFAHit = 0; ++ } ++ } ++ } ++ ++ //RT_TRACE(COMP_DIG, DBG_LOUD, ("DM_DigTable.ForbiddenIGI = 0x%x, DM_DigTable.LargeFAHit = 0x%x\n",pDigTable->ForbiddenIGI, pDigTable->LargeFAHit)); ++ //RT_TRACE(COMP_DIG, DBG_LOUD, ("DM_DigTable.rx_gain_range_max = 0x%x, DM_DigTable.rx_gain_range_min = 0x%x\n",pDigTable->rx_gain_range_max, pDigTable->rx_gain_range_min)); ++ ++#ifdef CONFIG_USB_HCI ++ if(FalseAlmCnt->Cnt_all < 250) ++ { ++#endif ++ //DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by SS mode\n"); ++ ++ isBT = rtw_read8(pAdapter, 0x4fd) & 0x01; ++ ++ if(!isBT){ ++ ++ if(FalseAlmCnt->Cnt_all > pDigTable->FAHighThresh) ++ { ++ if((pDigTable->BackoffVal -2) < pDigTable->BackoffVal_range_min) ++ pDigTable->BackoffVal = pDigTable->BackoffVal_range_min; ++ else ++ pDigTable->BackoffVal -= 2; ++ } ++ else if(FalseAlmCnt->Cnt_all < pDigTable->FALowThresh) ++ { ++ if((pDigTable->BackoffVal+2) > pDigTable->BackoffVal_range_max) ++ pDigTable->BackoffVal = pDigTable->BackoffVal_range_max; ++ else ++ pDigTable->BackoffVal +=2; ++ } ++ } ++ else ++ pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT; ++ ++ pDigTable->CurIGValue = pDigTable->Rssi_val_min+10-pDigTable->BackoffVal; ++ ++ //DBG_8192C("Rssi_val_min = %x BackoffVal %x\n",pDigTable->Rssi_val_min, pDigTable->BackoffVal); ++#ifdef CONFIG_USB_HCI ++ } ++ else ++ { ++ //DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by FA mode\n"); ++ //DBG_8192C("RSSI = 0x%x", pDigTable->Rssi_val_min); ++ ++ //Adjust initial gain by false alarm ++ if(FalseAlmCnt->Cnt_all > 1000) ++ pDigTable->CurIGValue = pDigTable ->PreIGValue+2; ++ else if (FalseAlmCnt->Cnt_all > 750) ++ pDigTable->CurIGValue = pDigTable->PreIGValue+1; ++ else if(FalseAlmCnt->Cnt_all < 500) ++ pDigTable->CurIGValue = pDigTable->PreIGValue-1; ++ } ++#endif ++ ++ if(RSSI_tmp <= DM_DIG_MIN) ++ pDigTable->rx_gain_range_min = DM_DIG_MIN; ++ else if(RSSI_tmp >= DM_DIG_MAX) ++ pDigTable->rx_gain_range_min = DM_DIG_MAX; ++ else ++ pDigTable->rx_gain_range_min = RSSI_tmp; ++ ++ ++ //Check initial gain by upper/lower bound ++ if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_max; ++ ++ if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_min; ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ if(pdmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY) ++ { ++ if(pDigTable->CurIGValue > Adap_IGI_Upper) ++ pDigTable->CurIGValue = Adap_IGI_Upper; ++ ++ if(pdmpriv->IGI_LowerBound != 0) ++ { ++ if(pDigTable->CurIGValue < pdmpriv->IGI_LowerBound) ++ pDigTable->CurIGValue = pdmpriv->IGI_LowerBound; ++ } ++ LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT": pdmpriv->IGI_LowerBound = %d\n", ++ FUNC_ADPT_ARG(pAdapter), pdmpriv->IGI_LowerBound); ++ } ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ ++ //printk("%s => rx_gain_range_max(0x%02x) rx_gain_range_min(0x%02x)\n",__FUNCTION__, ++ // pDigTable->rx_gain_range_max,pDigTable->rx_gain_range_min); ++ //printk("%s CurIGValue(0x%02x) <====\n",__FUNCTION__,pDigTable->CurIGValue ); ++ ++ DM_Write_DIG(pAdapter); ++ ++} ++#endif ++ ++static VOID ++dm_initial_gain_Multi_STA( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &(pAdapter->mlmepriv); ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ int rssi_strength = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ BOOLEAN bMulti_STA = _FALSE; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ //AP Mode ++ if(check_buddy_fwstate(pAdapter, WIFI_AP_STATE) == _TRUE && (rssi_strength !=0)) ++ { ++ bMulti_STA = _TRUE; ++ } ++ else if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT && rssi_strength==0) //STA+STA MODE ++ { ++ bMulti_STA = _TRUE; ++ rssi_strength = pdmpriv->UndecoratedSmoothedPWDB; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ ++ //ADHOC and AP Mode ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ bMulti_STA = _TRUE; ++ } ++ ++ ++ if((bMulti_STA == _FALSE) ++ || (pDigTable->CurSTAConnectState == DIG_STA_DISCONNECT)) ++ { ++ pdmpriv->binitialized = _FALSE; ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX; ++ return; ++ } ++ else if(pdmpriv->binitialized == _FALSE) ++ { ++ pdmpriv->binitialized = _TRUE; ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_0; ++ pDigTable->CurIGValue = 0x20; ++ DM_Write_DIG(pAdapter); ++ } ++ ++ // Initial gain control by ap mode ++ if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT) ++ { ++ if ( (rssi_strength < pDigTable->RssiLowThresh) && ++ (pDigTable->Dig_Ext_Port_Stage != DIG_EXT_PORT_STAGE_1)) ++ { ++ // Set to dig value to 0x20 for Luke's opinion after disable dig ++ if(pDigTable->Dig_Ext_Port_Stage == DIG_EXT_PORT_STAGE_2) ++ { ++ pDigTable->CurIGValue = 0x20; ++ DM_Write_DIG(pAdapter); ++ } ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_1; ++ } ++ else if (rssi_strength > pDigTable->RssiHighThresh) ++ { ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_2; ++ dm_CtrlInitGainByFA(pAdapter); ++ } ++ } ++ else if(pDigTable->Dig_Ext_Port_Stage != DIG_EXT_PORT_STAGE_0) ++ { ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_0; ++ pDigTable->CurIGValue = 0x20; ++ DM_Write_DIG(pAdapter); ++ } ++ ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("CurMultiSTAConnectState = %x Dig_Ext_Port_Stage %x\n", ++ // DM_DigTable.CurMultiSTAConnectState, DM_DigTable.Dig_Ext_Port_Stage)); ++} ++ ++static VOID ++dm_initial_gain_STA_beforelinked( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ PFALSE_ALARM_STATISTICS pFalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++ ++ //CurrentIGI = pDM_DigTable->rx_gain_range_min;//pDM_DigTable->CurIGValue = pDM_DigTable->rx_gain_range_min ++ //ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD, ("odm_DIG(): DIG BeforeLink\n")); ++ //2012.03.30 LukeLee: enable DIG before link but with very high thresholds ++ // Updated by Albert 2012/09/27 ++ // Copy the same rule from 8192du code. ++ if( pFalseAlmCnt->Cnt_all > 2000 ) ++ pDigTable->CurIGValue += 2; ++ else if ( ( pFalseAlmCnt->Cnt_all > 1000 ) && ( pFalseAlmCnt->Cnt_all <= 1000 ) ) ++ pDigTable->CurIGValue += 1; ++ else if(pFalseAlmCnt->Cnt_all < 500) ++ pDigTable->CurIGValue -= 1; ++ ++ //Check initial gain by upper/lower bound ++ if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_max; ++ ++ if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min) ++ pDigTable->CurIGValue = pDigTable->rx_gain_range_min; ++ ++ printk("%s ==> FalseAlmCnt->Cnt_all:%d CurIGValue:0x%02x \n",__FUNCTION__,pFalseAlmCnt->Cnt_all ,pDigTable->CurIGValue); ++} ++ ++static VOID ++dm_initial_gain_STA( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("PreSTAConnectState = %x, CurSTAConnectState = %x\n", ++ // DM_DigTable.PreSTAConnectState, DM_DigTable.CurSTAConnectState)); ++ ++ ++ if(pDigTable->PreSTAConnectState == pDigTable->CurSTAConnectState|| ++ pDigTable->CurSTAConnectState == DIG_STA_BEFORE_CONNECT || ++ pDigTable->CurSTAConnectState == DIG_STA_CONNECT) ++ { ++ // beforeconnect -> beforeconnect or connect -> connect ++ // (dis)connect -> beforeconnect ++ // disconnect -> connecct or beforeconnect -> connect ++ if(pDigTable->CurSTAConnectState != DIG_STA_DISCONNECT) ++ { ++ pDigTable->Rssi_val_min = dm_initial_gain_MinPWDB(pAdapter); ++ dm_CtrlInitGainByRssi(pAdapter); ++ } ++#if 0 ++ else if((wdev_to_priv(pAdapter->rtw_wdev))->p2p_enabled == _TRUE ++ && pAdapter->wdinfo.driver_interface == DRIVER_CFG80211) ++ { ++ //pDigTable->CurIGValue = 0x30; ++ DM_Write_DIG(pAdapter); ++ } ++#endif ++ else{ // pDigTable->CurSTAConnectState == DIG_STA_DISCONNECT ++ #ifdef CONFIG_BEFORE_LINKED_DIG ++ //printk("%s==> ##1 CurIGI(0x%02x),PreIGValue(0x%02x) \n",__FUNCTION__,pDigTable->CurIGValue,pDigTable->PreIGValue ); ++ dm_initial_gain_STA_beforelinked(pAdapter); ++ DM_Write_DIG(pAdapter); ++ #endif //CONFIG_BEFORE_LINKED_DIG ++ } ++ } ++ else ++ { ++ // connect -> disconnect or beforeconnect -> disconnect ++ pDigTable->Rssi_val_min = 0; ++ pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX; ++ pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT; ++ pDigTable->CurIGValue = 0x20; ++ pDigTable->PreIGValue = 0; ++ #ifdef CONFIG_BEFORE_LINKED_DIG ++ //printk("%s==> ##2 CurIGI(0x%02x),PreIGValue(0x%02x) \n",__FUNCTION__,pDigTable->CurIGValue,pDigTable->PreIGValue ); ++ dm_initial_gain_STA_beforelinked(pAdapter); ++ #endif //CONFIG_BEFORE_LINKED_DIG ++ ++ ++ DM_Write_DIG(pAdapter); ++ } ++ ++} ++ ++ ++static void dm_CCK_PacketDetectionThresh( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt); ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ if(pDigTable->CurSTAConnectState == DIG_STA_CONNECT) ++ { ++ pDigTable->Rssi_val_min = dm_initial_gain_MinPWDB(pAdapter); ++ if(pDigTable->PreCCKPDState == CCK_PD_STAGE_LowRssi) ++ { ++ if(pDigTable->Rssi_val_min <= 25) ++ pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi; ++ else ++ pDigTable->CurCCKPDState = CCK_PD_STAGE_HighRssi; ++ } ++ else{ ++ if(pDigTable->Rssi_val_min <= 20) ++ pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi; ++ else ++ pDigTable->CurCCKPDState = CCK_PD_STAGE_HighRssi; ++ } ++ } ++ else ++ pDigTable->CurCCKPDState=CCK_PD_STAGE_MAX; ++ ++ if(pDigTable->PreCCKPDState != pDigTable->CurCCKPDState) ++ { ++ if((pDigTable->CurCCKPDState == CCK_PD_STAGE_LowRssi)|| ++ (pDigTable->CurCCKPDState == CCK_PD_STAGE_MAX)) ++ { ++ PHY_SetBBReg(pAdapter, rCCK0_CCA, bMaskByte2, 0x83); ++ ++ //PHY_SetBBReg(pAdapter, rCCK0_System, bMaskByte1, 0x40); ++ //if(IS_92C_SERIAL(pHalData->VersionID)) ++ //PHY_SetBBReg(pAdapter, rCCK0_FalseAlarmReport , bMaskByte2, 0xd7); ++ } ++ else ++ { ++ PHY_SetBBReg(pAdapter, rCCK0_CCA, bMaskByte2, 0xcd); ++ //PHY_SetBBReg(pAdapter,rCCK0_System, bMaskByte1, 0x47); ++ //if(IS_92C_SERIAL(pHalData->VersionID)) ++ //PHY_SetBBReg(pAdapter, rCCK0_FalseAlarmReport , bMaskByte2, 0xd3); ++ } ++ ++ pDigTable->PreCCKPDState = pDigTable->CurCCKPDState; ++ } ++ ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("CCKPDStage=%x\n",pDigTable->CurCCKPDState)); ++ //RT_TRACE( COMP_DIG, DBG_LOUD, ("is92C=%x\n",IS_92C_SERIAL(pHalData->VersionID))); ++ ++} ++ ++ ++static void ++dm_CtrlInitGainByTwoPort( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &(pAdapter->mlmepriv); ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) ++ { ++#ifdef CONFIG_IOCTL_CFG80211 ++ if((wdev_to_priv(pAdapter->rtw_wdev))->p2p_enabled == _TRUE) ++ { ++ } ++ else ++#endif ++ return; ++ } ++ ++ // Decide the current status and if modify initial gain or not ++ if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) ++ { ++ pDigTable->CurSTAConnectState = DIG_STA_BEFORE_CONNECT; ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ pDigTable->CurSTAConnectState = DIG_STA_CONNECT; ++ } ++ else ++ { ++ pDigTable->CurSTAConnectState = DIG_STA_DISCONNECT; ++ } ++ ++ ++ pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_DISCONNECT; ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ if((is_IBSS_empty(pAdapter)==_FAIL) && (pAdapter->stapriv.asoc_sta_count > 2)) ++ pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ if(pAdapter->stapriv.asoc_sta_count > 2) ++ pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(pAdapter, WIFI_AP_STATE) == _TRUE) ++ { ++ PADAPTER pbuddy_adapter = pAdapter->pbuddy_adapter; ++ ++ if(pbuddy_adapter->stapriv.asoc_sta_count > 2) ++ { ++ pDigTable->CurSTAConnectState = DIG_STA_CONNECT; ++ pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT; ++ } ++ } ++ else if(check_buddy_fwstate(pAdapter, WIFI_STATION_STATE) == _TRUE && ++ check_buddy_fwstate(pAdapter, _FW_LINKED) == _TRUE) ++ { ++ pDigTable->CurSTAConnectState = DIG_STA_CONNECT; ++ ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ ++ dm_initial_gain_STA(pAdapter); ++ dm_initial_gain_Multi_STA(pAdapter); ++ //Baron temp DIG solution for DMP ++ //dm_CtrlInitGainByFA(pAdapter); ++ ++ dm_CCK_PacketDetectionThresh(pAdapter); ++ ++ pDigTable->PreSTAConnectState = pDigTable->CurSTAConnectState; ++ ++} ++ ++ ++static void dm_DIG( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ //Read 0x0c50; Initial gain ++ pDigTable->PreIGValue = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0); ++ ++ //RTPRINT(FDM, DM_Monitor, ("dm_DIG() ==>\n")); ++ ++ if(pdmpriv->bDMInitialGainEnable == _FALSE) ++ return; ++ ++ //if(pDigTable->Dig_Enable_Flag == _FALSE) ++ // return; ++ ++ if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_DIG)) ++ return; ++ ++ //RTPRINT(FDM, DM_Monitor, ("dm_DIG() progress \n")); ++ ++ dm_CtrlInitGainByTwoPort(pAdapter); ++ ++ //RTPRINT(FDM, DM_Monitor, ("dm_DIG() <==\n")); ++} ++ ++static void dm_SavePowerIndex(IN PADAPTER Adapter) ++{ ++ u8 index; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u32 Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a}; ++ ++ for(index = 0; index< 6; index++) ++ pdmpriv->PowerIndex_backup[index] = rtw_read8(Adapter, Power_Index_REG[index]); ++} ++ ++static void dm_RestorePowerIndex(IN PADAPTER Adapter) ++{ ++ u8 index; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u32 Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a}; ++ ++ for(index = 0; index< 6; index++) ++ rtw_write8(Adapter, Power_Index_REG[index], pdmpriv->PowerIndex_backup[index]); ++} ++ ++static void dm_WritePowerIndex( ++ IN PADAPTER Adapter, ++ IN u8 Value) ++{ ++ u8 index; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a}; ++ ++ for(index = 0; index< 6; index++) ++ rtw_write8(Adapter, Power_Index_REG[index], Value); ++} ++ ++static void dm_InitDynamicTxPower(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++#ifdef CONFIG_USB_HCI ++#ifdef CONFIG_INTEL_PROXIM ++ if((pHalData->BoardType == BOARD_USB_High_PA)||(Adapter->proximity.proxim_support==_TRUE)) ++#else ++ if(pHalData->BoardType == BOARD_USB_High_PA) ++#endif ++ { ++ dm_SavePowerIndex(Adapter); ++ pdmpriv->bDynamicTxPowerEnable = _TRUE; ++ } ++ else ++#else ++ pdmpriv->bDynamicTxPowerEnable = _FALSE; ++#endif ++ ++ pdmpriv->LastDTPLvl = TxHighPwrLevel_Normal; ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal; ++} ++ ++ ++static void dm_DynamicTxPower(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ int UndecoratedSmoothedPWDB; ++ ++ if(!pdmpriv->bDynamicTxPowerEnable) ++ return; ++ ++ // If dynamic high power is disabled. ++ if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_HP) ) ++ { ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal; ++ return; ++ } ++ ++ // STA not connected and AP not connected ++ if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) && ++ (pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0)) ++ { ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("Not connected to any \n")); ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal; ++ ++ //the LastDTPlvl should reset when disconnect, ++ //otherwise the tx power level wouldn't change when disconnect and connect again. ++ // Maddest 20091220. ++ pdmpriv->LastDTPLvl=TxHighPwrLevel_Normal; ++ return; ++ } ++#ifdef CONFIG_INTEL_PROXIM ++ if(Adapter->proximity.proxim_on== _TRUE){ ++ struct proximity_priv *prox_priv=Adapter->proximity.proximity_priv; ++ // Intel set fixed tx power ++ printk("\n %s Adapter->proximity.proxim_on=%d prox_priv->proxim_modeinfo->power_output=%d \n",__FUNCTION__,Adapter->proximity.proxim_on,prox_priv->proxim_modeinfo->power_output); ++ if(prox_priv!=NULL){ ++ if(prox_priv->proxim_modeinfo->power_output> 0) ++ ++ { ++ switch(prox_priv->proxim_modeinfo->power_output){ ++ case 1: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_100; ++ printk("TxHighPwrLevel_100\n"); ++ break; ++ case 2: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_70; ++ printk("TxHighPwrLevel_70\n"); ++ break; ++ case 3: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_50; ++ printk("TxHighPwrLevel_50\n"); ++ break; ++ case 4: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_35; ++ printk("TxHighPwrLevel_35\n"); ++ break; ++ case 5: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_15; ++ printk("TxHighPwrLevel_15\n"); ++ break; ++ default: ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_100; ++ printk("TxHighPwrLevel_100\n"); ++ break; ++ } ++ } ++ } ++ } ++ else ++#endif ++{ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) // Default port ++ { ++ //todo: AP Mode ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)) ++ { ++ UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("AP Client PWDB = 0x%x \n", UndecoratedSmoothedPWDB)); ++ } ++ else ++ { ++ UndecoratedSmoothedPWDB = pdmpriv->UndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("STA Default Port PWDB = 0x%x \n", UndecoratedSmoothedPWDB)); ++ } ++ } ++ else // associated entry pwdb ++ { ++ UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("AP Ext Port PWDB = 0x%x \n", UndecoratedSmoothedPWDB)); ++ } ++ ++ if(UndecoratedSmoothedPWDB >= TX_POWER_NEAR_FIELD_THRESH_LVL2) ++ { ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Level2; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Level1 (TxPwr=0x0)\n")); ++ } ++ else if((UndecoratedSmoothedPWDB < (TX_POWER_NEAR_FIELD_THRESH_LVL2-3)) && ++ (UndecoratedSmoothedPWDB >= TX_POWER_NEAR_FIELD_THRESH_LVL1) ) ++ { ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Level1; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Level1 (TxPwr=0x10)\n")); ++ } ++ else if(UndecoratedSmoothedPWDB < (TX_POWER_NEAR_FIELD_THRESH_LVL1-5)) ++ { ++ pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal; ++ //RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Normal\n")); ++ } ++} ++ if( (pdmpriv->DynamicTxHighPowerLvl != pdmpriv->LastDTPLvl) ) ++ { ++ PHY_SetTxPowerLevel8192C(Adapter, pHalData->CurrentChannel); ++ if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Normal) // HP1 -> Normal or HP2 -> Normal ++ dm_RestorePowerIndex(Adapter); ++ else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) ++ dm_WritePowerIndex(Adapter, 0x14); ++ else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) ++ dm_WritePowerIndex(Adapter, 0x10); ++ } ++ pdmpriv->LastDTPLvl = pdmpriv->DynamicTxHighPowerLvl; ++ ++} ++ ++ ++static VOID ++DM_ChangeDynamicInitGainThresh( ++ IN PADAPTER pAdapter, ++ IN u32 DM_Type, ++ IN u32 DM_Value) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ ++ if (DM_Type == DIG_TYPE_THRESH_HIGH) ++ { ++ pDigTable->RssiHighThresh = DM_Value; ++ } ++ else if (DM_Type == DIG_TYPE_THRESH_LOW) ++ { ++ pDigTable->RssiLowThresh = DM_Value; ++ } ++ else if (DM_Type == DIG_TYPE_ENABLE) ++ { ++ pDigTable->Dig_Enable_Flag = _TRUE; ++ } ++ else if (DM_Type == DIG_TYPE_DISABLE) ++ { ++ pDigTable->Dig_Enable_Flag = _FALSE; ++ } ++ else if (DM_Type == DIG_TYPE_BACKOFF) ++ { ++ if(DM_Value > 30) ++ DM_Value = 30; ++ pDigTable->BackoffVal = (u8)DM_Value; ++ } ++ else if(DM_Type == DIG_TYPE_RX_GAIN_MIN) ++ { ++ if(DM_Value == 0) ++ DM_Value = 0x1; ++ pDigTable->rx_gain_range_min = (u8)DM_Value; ++ } ++ else if(DM_Type == DIG_TYPE_RX_GAIN_MAX) ++ { ++ if(DM_Value > 0x50) ++ DM_Value = 0x50; ++ pDigTable->rx_gain_range_max = (u8)DM_Value; ++ } ++} /* DM_ChangeDynamicInitGainThresh */ ++ ++ ++static VOID PWDB_Monitor( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ int i; ++ int tmpEntryMaxPWDB=0, tmpEntryMinPWDB=0xff; ++ u8 sta_cnt=0; ++ u32 PWDB_rssi[NUM_STA]={0};//[0~15]:MACID, [16~31]:PWDB_rssi ++ ++ if(check_fwstate(&Adapter->mlmepriv, _FW_LINKED) != _TRUE) ++ return; ++ ++ ++ if(check_fwstate(&Adapter->mlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ _irqL irqL; ++ _list *plist, *phead; ++ struct sta_info *psta; ++ struct sta_priv *pstapriv = &Adapter->stapriv; ++ u8 bcast_addr[ETH_ALEN]= {0xff,0xff,0xff,0xff,0xff,0xff}; ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(i=0; i< NUM_STA; i++) ++ { ++ phead = &(pstapriv->sta_hash[i]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ plist = get_next(plist); ++ ++ if(_rtw_memcmp(psta ->hwaddr, bcast_addr, ETH_ALEN) || ++ _rtw_memcmp(psta->hwaddr, myid(&Adapter->eeprompriv), ETH_ALEN)) ++ continue; ++ ++ if(psta->state & WIFI_ASOC_STATE) ++ { ++ ++ if(psta->rssi_stat.UndecoratedSmoothedPWDB < tmpEntryMinPWDB) ++ tmpEntryMinPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB; ++ ++ if(psta->rssi_stat.UndecoratedSmoothedPWDB > tmpEntryMaxPWDB) ++ tmpEntryMaxPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB; ++ ++ PWDB_rssi[sta_cnt++] = (psta->mac_id | (psta->rssi_stat.UndecoratedSmoothedPWDB<<16)); ++ } ++ ++ } ++ ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ ++ ++ if(pHalData->fw_ractrl == _TRUE) ++ { ++ // Report every sta's RSSI to FW ++ for(i=0; i< sta_cnt; i++) ++ { ++ rtl8192c_set_rssi_cmd(Adapter, (u8*)&PWDB_rssi[i]); ++ } ++ } ++ ++ } ++ ++ ++ ++ if(tmpEntryMaxPWDB != 0) // If associated entry is found ++ { ++ pdmpriv->EntryMaxUndecoratedSmoothedPWDB = tmpEntryMaxPWDB; ++ } ++ else ++ { ++ pdmpriv->EntryMaxUndecoratedSmoothedPWDB = 0; ++ } ++ ++ if(tmpEntryMinPWDB != 0xff) // If associated entry is found ++ { ++ pdmpriv->EntryMinUndecoratedSmoothedPWDB = tmpEntryMinPWDB; ++ } ++ else ++ { ++ pdmpriv->EntryMinUndecoratedSmoothedPWDB = 0; ++ } ++ ++ ++ if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ ++ if(pHalData->fw_ractrl == _TRUE) ++ { ++ u32 param = (u32)(pdmpriv->UndecoratedSmoothedPWDB<<16); ++ ++ param |= 0;//macid=0 for sta mode; ++ ++ rtl8192c_set_rssi_cmd(Adapter, (u8*)¶m); ++ } ++ } ++ ++} ++ ++ ++static void ++DM_InitEdcaTurbo( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ pHalData->bCurrentTurboEDCA = _FALSE; ++ Adapter->recvpriv.bIsAnyNonBEPkts = _FALSE; ++ ++} ++ ++ ++static void ++dm_CheckEdcaTurbo( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 trafficIndex; ++ u32 edca_param; ++ u64 cur_tx_bytes = 0; ++ u64 cur_rx_bytes = 0; ++ u8 bbtchange = _FALSE; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct xmit_priv *pxmitpriv = &(Adapter->xmitpriv); ++ struct recv_priv *precvpriv = &(Adapter->recvpriv); ++ struct registry_priv *pregpriv = &Adapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &(Adapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++#endif ++ ++ ++ if ((pregpriv->wifi_spec == 1) || (pmlmeinfo->HT_enable == 0)) ++ { ++ goto dm_CheckEdcaTurbo_EXIT; ++ } ++ ++ if (pmlmeinfo->assoc_AP_vendor >= maxAP) ++ { ++ goto dm_CheckEdcaTurbo_EXIT; ++ } ++ ++#ifdef CONFIG_BT_COEXIST ++ if(pbtpriv->BT_Coexist) ++ { ++ if( (pbtpriv->BT_EDCA[UP_LINK]!=0) || (pbtpriv->BT_EDCA[DOWN_LINK]!=0)) ++ { ++ bbtchange = _TRUE; ++ } ++ } ++#endif ++ ++ // Check if the status needs to be changed. ++ if((bbtchange) || (!precvpriv->bIsAnyNonBEPkts) ) ++ { ++ cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes; ++ cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes; ++ ++ //traffic, TX or RX ++ if((pmlmeinfo->assoc_AP_vendor == ralinkAP)||(pmlmeinfo->assoc_AP_vendor == atherosAP)) ++ { ++ if (cur_tx_bytes > (cur_rx_bytes << 2)) ++ { // Uplink TP is present. ++ trafficIndex = UP_LINK; ++ } ++ else ++ { // Balance TP is present. ++ trafficIndex = DOWN_LINK; ++ } ++ } ++ else ++ { ++ if (cur_rx_bytes > (cur_tx_bytes << 2)) ++ { // Downlink TP is present. ++ trafficIndex = DOWN_LINK; ++ } ++ else ++ { // Balance TP is present. ++ trafficIndex = UP_LINK; ++ } ++ } ++ ++ if ((pdmpriv->prv_traffic_idx != trafficIndex) || (!pHalData->bCurrentTurboEDCA)) ++ { ++#ifdef CONFIG_BT_COEXIST ++ if(_TRUE == bbtchange) ++ { ++ edca_param = pbtpriv->BT_EDCA[trafficIndex]; ++ } ++ else ++#endif ++ { ++#if 0 ++ //adjust EDCA parameter for BE queue ++ edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]; ++#else ++ ++ if((pmlmeinfo->assoc_AP_vendor == ciscoAP) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N)) ++ { ++ edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]; ++ } ++ else ++ { ++ edca_param = EDCAParam[unknownAP][trafficIndex]; ++ } ++#endif ++ } ++ ++#ifdef CONFIG_PCI_HCI ++ if(IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ edca_param = 0x60a42b; ++ } ++ else ++ { ++ edca_param = 0x6ea42b; ++ } ++#endif ++ rtw_write32(Adapter, REG_EDCA_BE_PARAM, edca_param); ++ ++ pdmpriv->prv_traffic_idx = trafficIndex; ++ } ++ ++ pHalData->bCurrentTurboEDCA = _TRUE; ++ } ++ else ++ { ++ // ++ // Turn Off EDCA turbo here. ++ // Restore original EDCA according to the declaration of AP. ++ // ++ if(pHalData->bCurrentTurboEDCA) ++ { ++ rtw_write32(Adapter, REG_EDCA_BE_PARAM, pHalData->AcParam_BE); ++ pHalData->bCurrentTurboEDCA = _FALSE; ++ } ++ } ++ ++dm_CheckEdcaTurbo_EXIT: ++ // Set variables for next time. ++ precvpriv->bIsAnyNonBEPkts = _FALSE; ++ pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes; ++ precvpriv->last_rx_bytes = precvpriv->rx_bytes; ++ ++} ++ ++#define DPK_DELTA_MAPPING_NUM 13 ++#define index_mapping_HP_NUM 15 ++ ++static VOID ++dm_TXPowerTrackingCallback_ThermalMeter_92C( ++ IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 ThermalValue = 0, delta, delta_LCK, delta_IQK, delta_HP, TimeOut = 100; ++ int ele_A, ele_D, TempCCk, X, value32; ++ int Y, ele_C; ++ s8 OFDM_index[2], CCK_index = 0, OFDM_index_old[2], CCK_index_old = 0; ++ int i = 0; ++ BOOLEAN is2T = IS_92C_SERIAL(pHalData->VersionID); ++ ++#if MP_DRIVER == 1 ++ PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.MptCtx); ++ u8 *TxPwrLevel = pMptCtx->TxPwrLevel; ++#endif ++ u8 OFDM_min_index = 6, rf; //OFDM BB Swing should be less than +3.0dB, which is required by Arthur ++#if 0 ++ u32 DPK_delta_mapping[2][DPK_DELTA_MAPPING_NUM] = { ++ {0x1c, 0x1c, 0x1d, 0x1d, 0x1e, ++ 0x1f, 0x00, 0x00, 0x01, 0x01, ++ 0x02, 0x02, 0x03}, ++ {0x1c, 0x1d, 0x1e, 0x1e, 0x1e, ++ 0x1f, 0x00, 0x00, 0x01, 0x02, ++ 0x02, 0x03, 0x03}}; ++#endif ++#ifdef CONFIG_USB_HCI ++ u8 ThermalValue_HP_count = 0; ++ u32 ThermalValue_HP = 0; ++ s32 index_mapping_HP[index_mapping_HP_NUM] = { ++ 0, 1, 3, 4, 6, ++ 7, 9, 10, 12, 13, ++ 15, 16, 18, 19, 21 ++ }; ++ ++ s8 index_HP; ++#endif ++ ++ pdmpriv->TXPowerTrackingCallbackCnt++; //cosa add for debug ++ pdmpriv->bTXPowerTrackingInit = _TRUE; ++ ++ if(pHalData->CurrentChannel == 14 && !pdmpriv->bCCKinCH14) ++ pdmpriv->bCCKinCH14 = _TRUE; ++ else if(pHalData->CurrentChannel != 14 && pdmpriv->bCCKinCH14) ++ pdmpriv->bCCKinCH14 = _FALSE; ++ ++ //DBG_8192C("===>dm_TXPowerTrackingCallback_ThermalMeter_92C\n"); ++ ++ ThermalValue = (u8)PHY_QueryRFReg(Adapter, RF_PATH_A, RF_T_METER, 0x1f); // 0x24: RF Reg[4:0] ++ ++ //DBG_8192C("\n\nReadback Thermal Meter = 0x%x pre thermal meter 0x%x EEPROMthermalmeter 0x%x\n",ThermalValue,pdmpriv->ThermalValue, pHalData->EEPROMThermalMeter); ++ ++ rtl8192c_PHY_APCalibrate(Adapter, (ThermalValue - pHalData->EEPROMThermalMeter)); ++ ++ if(is2T) ++ rf = 2; ++ else ++ rf = 1; ++ ++ if(ThermalValue) ++ { ++// if(!pHalData->ThermalValue) ++ { ++ //Query OFDM path A default setting ++ ele_D = PHY_QueryBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord)&bMaskOFDM_D; ++ for(i=0; ibCCKinCH14) ++ { ++ if(_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4)==_TRUE) ++ { ++ CCK_index_old =(u8)i; ++ //DBG_8192C("Initial reg0x%x = 0x%x, CCK_index=0x%x, ch 14 %d\n", rCCK0_TxFilter2, TempCCk, CCK_index_old, pdmpriv->bCCKinCH14); ++ break; ++ } ++ } ++ else ++ { ++ if(_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4)==_TRUE) ++ { ++ CCK_index_old =(u8)i; ++ //DBG_8192C("Initial reg0x%x = 0x%x, CCK_index=0x%x, ch14 %d\n", rCCK0_TxFilter2, TempCCk, CCK_index_old, pdmpriv->bCCKinCH14); ++ break; ++ } ++ } ++ } ++ ++ if(!pdmpriv->ThermalValue) ++ { ++ pdmpriv->ThermalValue = pHalData->EEPROMThermalMeter; ++ pdmpriv->ThermalValue_LCK = ThermalValue; ++ pdmpriv->ThermalValue_IQK = ThermalValue; ++ pdmpriv->ThermalValue_DPK = pHalData->EEPROMThermalMeter; ++ ++#ifdef CONFIG_USB_HCI ++ for(i = 0; i < rf; i++) ++ pdmpriv->OFDM_index_HP[i] = pdmpriv->OFDM_index[i] = OFDM_index_old[i]; ++ pdmpriv->CCK_index_HP = pdmpriv->CCK_index = CCK_index_old; ++#else ++ for(i = 0; i < rf; i++) ++ pdmpriv->OFDM_index[i] = OFDM_index_old[i]; ++ pdmpriv->CCK_index = CCK_index_old; ++#endif ++ } ++ ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType == BOARD_USB_High_PA) ++ { ++ pdmpriv->ThermalValue_HP[pdmpriv->ThermalValue_HP_index] = ThermalValue; ++ pdmpriv->ThermalValue_HP_index++; ++ if(pdmpriv->ThermalValue_HP_index == HP_THERMAL_NUM) ++ pdmpriv->ThermalValue_HP_index = 0; ++ ++ for(i = 0; i < HP_THERMAL_NUM; i++) ++ { ++ if(pdmpriv->ThermalValue_HP[i]) ++ { ++ ThermalValue_HP += pdmpriv->ThermalValue_HP[i]; ++ ThermalValue_HP_count++; ++ } ++ } ++ ++ if(ThermalValue_HP_count) ++ ThermalValue = (u8)(ThermalValue_HP / ThermalValue_HP_count); ++ } ++#endif ++ } ++ ++ delta = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue); ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType == BOARD_USB_High_PA) ++ { ++ if(pdmpriv->bDoneTxpower) ++ delta_HP = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue); ++ else ++ delta_HP = ThermalValue > pHalData->EEPROMThermalMeter?(ThermalValue - pHalData->EEPROMThermalMeter):(pHalData->EEPROMThermalMeter - ThermalValue); ++ } ++ else ++#endif ++ { ++ delta_HP = 0; ++ } ++ delta_LCK = (ThermalValue > pdmpriv->ThermalValue_LCK)?(ThermalValue - pdmpriv->ThermalValue_LCK):(pdmpriv->ThermalValue_LCK - ThermalValue); ++ delta_IQK = (ThermalValue > pdmpriv->ThermalValue_IQK)?(ThermalValue - pdmpriv->ThermalValue_IQK):(pdmpriv->ThermalValue_IQK - ThermalValue); ++ ++ //DBG_8192C("Readback Thermal Meter = 0x%lx pre thermal meter 0x%lx EEPROMthermalmeter 0x%lx delta 0x%lx delta_LCK 0x%lx delta_IQK 0x%lx\n", ThermalValue, pHalData->ThermalValue, pHalData->EEPROMThermalMeter, delta, delta_LCK, delta_IQK); ++ ++ if(delta_LCK > 1) ++ { ++ pdmpriv->ThermalValue_LCK = ThermalValue; ++ rtl8192c_PHY_LCCalibrate(Adapter); ++ } ++ ++ if((delta > 0 || delta_HP > 0) && pdmpriv->TxPowerTrackControl) ++ { ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType == BOARD_USB_High_PA) ++ { ++ pdmpriv->bDoneTxpower = _TRUE; ++ delta_HP = ThermalValue > pHalData->EEPROMThermalMeter?(ThermalValue - pHalData->EEPROMThermalMeter):(pHalData->EEPROMThermalMeter - ThermalValue); ++ ++ if(delta_HP > index_mapping_HP_NUM-1) ++ index_HP = index_mapping_HP[index_mapping_HP_NUM-1]; ++ else ++ index_HP = index_mapping_HP[delta_HP]; ++ ++ if(ThermalValue > pHalData->EEPROMThermalMeter) //set larger Tx power ++ { ++ for(i = 0; i < rf; i++) ++ OFDM_index[i] = pdmpriv->OFDM_index_HP[i] - index_HP; ++ CCK_index = pdmpriv->CCK_index_HP -index_HP; ++ } ++ else ++ { ++ for(i = 0; i < rf; i++) ++ OFDM_index[i] = pdmpriv->OFDM_index_HP[i] + index_HP; ++ CCK_index = pdmpriv->CCK_index_HP + index_HP; ++ } ++ ++ delta_HP = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue); ++ ++ } ++ else ++#endif ++ { ++ if(ThermalValue > pdmpriv->ThermalValue) ++ { ++ for(i = 0; i < rf; i++) ++ pdmpriv->OFDM_index[i] -= delta; ++ pdmpriv->CCK_index -= delta; ++ } ++ else ++ { ++ for(i = 0; i < rf; i++) ++ pdmpriv->OFDM_index[i] += delta; ++ pdmpriv->CCK_index += delta; ++ } ++ } ++ ++ /*if(is2T) ++ { ++ DBG_8192C("temp OFDM_A_index=0x%x, OFDM_B_index=0x%x, CCK_index=0x%x\n", ++ pdmpriv->OFDM_index[0], pdmpriv->OFDM_index[1], pdmpriv->CCK_index); ++ } ++ else ++ { ++ DBG_8192C("temp OFDM_A_index=0x%x, CCK_index=0x%x\n", ++ pdmpriv->OFDM_index[0], pdmpriv->CCK_index); ++ }*/ ++ ++ //no adjust ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType != BOARD_USB_High_PA) ++#endif ++ { ++ if(ThermalValue > pHalData->EEPROMThermalMeter) ++ { ++ for(i = 0; i < rf; i++) ++ OFDM_index[i] = pdmpriv->OFDM_index[i]+1; ++ CCK_index = pdmpriv->CCK_index+1; ++ } ++ else ++ { ++ for(i = 0; i < rf; i++) ++ OFDM_index[i] = pdmpriv->OFDM_index[i]; ++ CCK_index = pdmpriv->CCK_index; ++ } ++ ++#if MP_DRIVER == 1 ++ for(i = 0; i < rf; i++) ++ { ++ if(TxPwrLevel[i] >=0 && TxPwrLevel[i] <=26) ++ { ++ if(ThermalValue > pHalData->EEPROMThermalMeter) ++ { ++ if (delta < 5) ++ OFDM_index[i] -= 1; ++ else ++ OFDM_index[i] -= 2; ++ } ++ else if(delta > 5 && ThermalValue < pHalData->EEPROMThermalMeter) ++ { ++ OFDM_index[i] += 1; ++ } ++ } ++ else if (TxPwrLevel[i] >= 27 && TxPwrLevel[i] <= 32 && ThermalValue > pHalData->EEPROMThermalMeter) ++ { ++ if (delta < 5) ++ OFDM_index[i] -= 1; ++ else ++ OFDM_index[i] -= 2; ++ } ++ else if (TxPwrLevel[i] >= 32 && TxPwrLevel[i] <= 38 && ThermalValue > pHalData->EEPROMThermalMeter && delta > 5) ++ { ++ OFDM_index[i] -= 1; ++ } ++ } ++ ++ { ++ if(TxPwrLevel[i] >=0 && TxPwrLevel[i] <=26) ++ { ++ if(ThermalValue > pHalData->EEPROMThermalMeter) ++ { ++ if (delta < 5) ++ CCK_index -= 1; ++ else ++ CCK_index -= 2; ++ } ++ else if(delta > 5 && ThermalValue < pHalData->EEPROMThermalMeter) ++ { ++ CCK_index += 1; ++ } ++ } ++ else if (TxPwrLevel[i] >= 27 && TxPwrLevel[i] <= 32 && ThermalValue > pHalData->EEPROMThermalMeter) ++ { ++ if (delta < 5) ++ CCK_index -= 1; ++ else ++ CCK_index -= 2; ++ } ++ else if (TxPwrLevel[i] >= 32 && TxPwrLevel[i] <= 38 && ThermalValue > pHalData->EEPROMThermalMeter && delta > 5) ++ { ++ CCK_index -= 1; ++ } ++ } ++#endif ++ } ++ ++ for(i = 0; i < rf; i++) ++ { ++ if(OFDM_index[i] > (OFDM_TABLE_SIZE_92C-1)) ++ OFDM_index[i] = (OFDM_TABLE_SIZE_92C-1); ++ else if (OFDM_index[i] < OFDM_min_index) ++ OFDM_index[i] = OFDM_min_index; ++ } ++ ++ if(CCK_index > (CCK_TABLE_SIZE-1)) ++ CCK_index = (CCK_TABLE_SIZE-1); ++ else if (CCK_index < 0) ++ CCK_index = 0; ++ ++ /*if(is2T) ++ { ++ DBG_8192C("new OFDM_A_index=0x%x, OFDM_B_index=0x%x, CCK_index=0x%x\n", ++ OFDM_index[0], OFDM_index[1], CCK_index); ++ } ++ else ++ { ++ DBG_8192C("new OFDM_A_index=0x%x, CCK_index=0x%x\n", ++ OFDM_index[0], CCK_index); ++ }*/ ++ } ++ ++ if(pdmpriv->TxPowerTrackControl && (delta != 0 || delta_HP != 0)) ++ { ++ //Adujst OFDM Ant_A according to IQK result ++ ele_D = (OFDMSwingTable[OFDM_index[0]] & 0xFFC00000)>>22; ++ X = pdmpriv->RegE94; ++ Y = pdmpriv->RegE9C; ++ ++ if(X != 0) ++ { ++ if ((X & 0x00000200) != 0) ++ X = X | 0xFFFFFC00; ++ ele_A = ((X * ele_D)>>8)&0x000003FF; ++ ++ //new element C = element D x Y ++ if ((Y & 0x00000200) != 0) ++ Y = Y | 0xFFFFFC00; ++ ele_C = ((Y * ele_D)>>8)&0x000003FF; ++ ++ //wirte new elements A, C, D to regC80 and regC94, element B is always 0 ++ value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A; ++ PHY_SetBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32); ++ ++ value32 = (ele_C&0x000003C0)>>6; ++ PHY_SetBBReg(Adapter, rOFDM0_XCTxAFE, bMaskH4Bits, value32); ++ ++ value32 = ((X * ele_D)>>7)&0x01; ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT31, value32); ++ ++ value32 = ((Y * ele_D)>>7)&0x01; ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT29, value32); ++ ++ } ++ else ++ { ++ PHY_SetBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[OFDM_index[0]]); ++ PHY_SetBBReg(Adapter, rOFDM0_XCTxAFE, bMaskH4Bits, 0x00); ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT31|BIT29, 0x00); ++ } ++ ++ //RTPRINT(FINIT, INIT_IQK, ("TxPwrTracking path A: X = 0x%x, Y = 0x%x ele_A = 0x%x ele_C = 0x%x ele_D = 0x%x\n", X, Y, ele_A, ele_C, ele_D)); ++ ++ //Adjust CCK according to IQK result ++ if(!pdmpriv->bCCKinCH14){ ++ rtw_write8(Adapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]); ++ rtw_write8(Adapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]); ++ rtw_write8(Adapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]); ++ rtw_write8(Adapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]); ++ rtw_write8(Adapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]); ++ rtw_write8(Adapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]); ++ rtw_write8(Adapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]); ++ rtw_write8(Adapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]); ++ } ++ else{ ++ rtw_write8(Adapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]); ++ rtw_write8(Adapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]); ++ rtw_write8(Adapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]); ++ rtw_write8(Adapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]); ++ rtw_write8(Adapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]); ++ rtw_write8(Adapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]); ++ rtw_write8(Adapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]); ++ rtw_write8(Adapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]); ++ } ++ ++ if(is2T) ++ { ++ ele_D = (OFDMSwingTable[(u8)OFDM_index[1]] & 0xFFC00000)>>22; ++ ++ //new element A = element D x X ++ X = pdmpriv->RegEB4; ++ Y = pdmpriv->RegEBC; ++ ++ if(X != 0){ ++ if ((X & 0x00000200) != 0) //consider minus ++ X = X | 0xFFFFFC00; ++ ele_A = ((X * ele_D)>>8)&0x000003FF; ++ ++ //new element C = element D x Y ++ if ((Y & 0x00000200) != 0) ++ Y = Y | 0xFFFFFC00; ++ ele_C = ((Y * ele_D)>>8)&0x00003FF; ++ ++ //wirte new elements A, C, D to regC88 and regC9C, element B is always 0 ++ value32=(ele_D<<22)|((ele_C&0x3F)<<16) |ele_A; ++ PHY_SetBBReg(Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32); ++ ++ value32 = (ele_C&0x000003C0)>>6; ++ PHY_SetBBReg(Adapter, rOFDM0_XDTxAFE, bMaskH4Bits, value32); ++ ++ value32 = ((X * ele_D)>>7)&0x01; ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT27, value32); ++ ++ value32 = ((Y * ele_D)>>7)&0x01; ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT25, value32); ++ ++ } ++ else{ ++ PHY_SetBBReg(Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, OFDMSwingTable[OFDM_index[1]]); ++ PHY_SetBBReg(Adapter, rOFDM0_XDTxAFE, bMaskH4Bits, 0x00); ++ PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT27|BIT25, 0x00); ++ } ++ ++ //DBG_8192C("TxPwrTracking path B: X = 0x%x, Y = 0x%x ele_A = 0x%x ele_C = 0x%x ele_D = 0x%x\n", X, Y, ele_A, ele_C, ele_D); ++ } ++ ++ /* ++ DBG_8192C("TxPwrTracking 0xc80 = 0x%x, 0xc94 = 0x%x RF 0x24 = 0x%x\n", \ ++ PHY_QueryBBReg(Adapter, 0xc80, bMaskDWord),\ ++ PHY_QueryBBReg(Adapter, 0xc94, bMaskDWord), \ ++ PHY_QueryRFReg(Adapter, RF_PATH_A, 0x24, bMaskDWord)); ++ */ ++ } ++ ++#if MP_DRIVER == 1 ++ if(delta_IQK > 1) ++#else ++ if(delta_IQK > 3) ++#endif ++ { ++ pdmpriv->ThermalValue_IQK = ThermalValue; ++ rtl8192c_PHY_IQCalibrate(Adapter,_FALSE); ++ } ++ ++ //update thermal meter value ++ if(pdmpriv->TxPowerTrackControl) ++ pdmpriv->ThermalValue = ThermalValue; ++ ++ } ++ ++ //DBG_8192C("<===dm_TXPowerTrackingCallback_ThermalMeter_92C\n"); ++ ++ pdmpriv->TXPowercount = 0; ++ ++} ++ ++ ++static VOID ++dm_InitializeTXPowerTracking_ThermalMeter( ++ IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ //pMgntInfo->bTXPowerTracking = _TRUE; ++ pdmpriv->TXPowercount = 0; ++ pdmpriv->bTXPowerTrackingInit = _FALSE; ++ pdmpriv->ThermalValue = 0; ++ ++#if (MP_DRIVER != 1) //for mp driver, turn off txpwrtracking as default ++ pdmpriv->TxPowerTrackControl = _TRUE; ++#endif ++ ++ MSG_8192C("pdmpriv->TxPowerTrackControl = %d\n", pdmpriv->TxPowerTrackControl); ++} ++ ++ ++static VOID ++DM_InitializeTXPowerTracking( ++ IN PADAPTER Adapter) ++{ ++ dm_InitializeTXPowerTracking_ThermalMeter(Adapter); ++} ++ ++// ++// Description: ++// - Dispatch TxPower Tracking direct call ONLY for 92s. ++// - We shall NOT schedule Workitem within PASSIVE LEVEL, which will cause system resource ++// leakage under some platform. ++// ++// Assumption: ++// PASSIVE_LEVEL when this routine is called. ++// ++// Added by Roger, 2009.06.18. ++// ++static VOID ++DM_TXPowerTracking92CDirectCall( ++ IN PADAPTER Adapter) ++{ ++ dm_TXPowerTrackingCallback_ThermalMeter_92C(Adapter); ++} ++ ++static VOID ++dm_CheckTXPowerTracking_ThermalMeter( ++ IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ //u1Byte TxPowerCheckCnt = 5; //10 sec ++ ++ //if(!pMgntInfo->bTXPowerTracking /*|| (!pdmpriv->TxPowerTrackControl && pdmpriv->bAPKdone)*/) ++ if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_SS)) ++ { ++ return; ++ } ++ ++ if(!pdmpriv->TM_Trigger) //at least delay 1 sec ++ { ++ //pHalData->TxPowerCheckCnt++; //cosa add for debug ++ PHY_SetRFReg(Adapter, RF_PATH_A, RF_T_METER, bRFRegOffsetMask, 0x60); ++ //DBG_8192C("Trigger 92C Thermal Meter!!\n"); ++ ++ pdmpriv->TM_Trigger = 1; ++ return; ++ ++ } ++ else ++ { ++ //DBG_8192C("Schedule TxPowerTracking direct call!!\n"); ++ DM_TXPowerTracking92CDirectCall(Adapter); //Using direct call is instead, added by Roger, 2009.06.18. ++ pdmpriv->TM_Trigger = 0; ++ } ++ ++} ++ ++ ++VOID ++rtl8192c_dm_CheckTXPowerTracking( ++ IN PADAPTER Adapter) ++{ ++ dm_CheckTXPowerTracking_ThermalMeter(Adapter); ++} ++ ++#ifdef CONFIG_BT_COEXIST ++static BOOLEAN BT_BTStateChange(PADAPTER Adapter) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ struct registry_priv *registry_par = &Adapter->registrypriv; ++ ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ ++ u32 Polling, Ratio_Tx, Ratio_PRI; ++ u32 BT_Tx, BT_PRI; ++ u8 BT_State; ++ static u8 ServiceTypeCnt = 0; ++ u8 CurServiceType; ++ static u8 LastServiceType = BT_Idle; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ++ return _FALSE; ++ ++ BT_State = rtw_read8(Adapter, 0x4fd); ++/* ++ temp = PlatformEFIORead4Byte(Adapter, 0x488); ++ BT_Tx = (u2Byte)(((temp<<8)&0xff00)+((temp>>8)&0xff)); ++ BT_PRI = (u2Byte)(((temp>>8)&0xff00)+((temp>>24)&0xff)); ++ ++ temp = PlatformEFIORead4Byte(Adapter, 0x48c); ++ Polling = ((temp<<8)&0xff000000) + ((temp>>8)&0x00ff0000) + ++ ((temp<<8)&0x0000ff00) + ((temp>>8)&0x000000ff); ++ ++*/ ++ BT_Tx = rtw_read32(Adapter, 0x488); ++ ++ DBG_8192C("Ratio 0x488 =%x\n", BT_Tx); ++ BT_Tx =BT_Tx & 0x00ffffff; ++ //RTPRINT(FBT, BT_TRACE, ("Ratio BT_Tx =%x\n", BT_Tx)); ++ ++ BT_PRI = rtw_read32(Adapter, 0x48c); ++ ++ DBG_8192C("Ratio 0x48c =%x\n", BT_PRI); ++ BT_PRI =BT_PRI & 0x00ffffff; ++ //RTPRINT(FBT, BT_TRACE, ("Ratio BT_PRI =%x\n", BT_PRI)); ++ ++ ++ Polling = rtw_read32(Adapter, 0x490); ++ //RTPRINT(FBT, BT_TRACE, ("Ratio 0x490 =%x\n", Polling)); ++ ++ ++ if(BT_Tx==0xffffffff && BT_PRI==0xffffffff && Polling==0xffffffff && BT_State==0xff) ++ return _FALSE; ++ ++ BT_State &= BIT0; ++ ++ if(BT_State != pbtpriv->BT_CUR_State) ++ { ++ pbtpriv->BT_CUR_State = BT_State; ++ ++ if(registry_par->bt_sco == 3) ++ { ++ ServiceTypeCnt = 0; ++ ++ pbtpriv->BT_Service = BT_Idle; ++ ++ DBG_8192C("BT_%s\n", BT_State?"ON":"OFF"); ++ ++ BT_State = BT_State | ++ ((pbtpriv->BT_Ant_isolation==1)?0:BIT1) |BIT2; ++ ++ rtw_write8(Adapter, 0x4fd, BT_State); ++ DBG_8192C("BT set 0x4fd to %x\n", BT_State); ++ } ++ ++ return _TRUE; ++ } ++ DBG_8192C("bRegBT_Sco = %d\n",registry_par->bt_sco); ++ ++ Ratio_Tx = BT_Tx*1000/Polling; ++ Ratio_PRI = BT_PRI*1000/Polling; ++ ++ pbtpriv->Ratio_Tx=Ratio_Tx; ++ pbtpriv->Ratio_PRI=Ratio_PRI; ++ ++ DBG_8192C("Ratio_Tx=%d\n", Ratio_Tx); ++ DBG_8192C("Ratio_PRI=%d\n", Ratio_PRI); ++ ++ ++ if(BT_State && registry_par->bt_sco==3) ++ { ++ DBG_8192C("bt_sco ==3 Follow Counter\n"); ++// if(BT_Tx==0xffff && BT_PRI==0xffff && Polling==0xffffffff) ++// { ++// ServiceTypeCnt = 0; ++// return FALSE; ++// } ++// else ++ { ++ /* ++ Ratio_Tx = BT_Tx*1000/Polling; ++ Ratio_PRI = BT_PRI*1000/Polling; ++ ++ pHalData->bt_coexist.Ratio_Tx=Ratio_Tx; ++ pHalData->bt_coexist.Ratio_PRI=Ratio_PRI; ++ ++ RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx)); ++ RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI)); ++ ++ */ ++ if((Ratio_Tx < 30) && (Ratio_PRI < 30)) ++ CurServiceType = BT_Idle; ++ else if((Ratio_PRI > 110) && (Ratio_PRI < 250)) ++ CurServiceType = BT_SCO; ++ else if((Ratio_Tx >= 200)&&(Ratio_PRI >= 200)) ++ CurServiceType = BT_Busy; ++ else if((Ratio_Tx >=350) && (Ratio_Tx < 500)) ++ CurServiceType = BT_OtherBusy; ++ else if(Ratio_Tx >=500) ++ CurServiceType = BT_PAN; ++ else ++ CurServiceType=BT_OtherAction; ++ } ++ ++/* if(pHalData->bt_coexist.bStopCount) ++ { ++ ServiceTypeCnt=0; ++ pHalData->bt_coexist.bStopCount=FALSE; ++ } ++*/ ++// if(CurServiceType == BT_OtherBusy) ++ { ++ ServiceTypeCnt=2; ++ LastServiceType=CurServiceType; ++ } ++#if 0 ++ else if(CurServiceType == LastServiceType) ++ { ++ if(ServiceTypeCnt<3) ++ ServiceTypeCnt++; ++ } ++ else ++ { ++ ServiceTypeCnt = 0; ++ LastServiceType = CurServiceType; ++ } ++#endif ++ ++ if(ServiceTypeCnt==2) ++ { ++ pbtpriv->BT_Service = LastServiceType; ++ BT_State = BT_State | ++ ((pbtpriv->BT_Ant_isolation==1)?0:BIT1) | ++ //((pbtpriv->BT_Service==BT_SCO)?0:BIT2); ++ ((pbtpriv->BT_Service!=BT_Idle)?0:BIT2); ++ ++ //if(pbtpriv->BT_Service==BT_Busy) ++ // BT_State&= ~(BIT2); ++ ++ if(pbtpriv->BT_Service==BT_SCO) ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_SCO\n"); ++ } ++ else if(pbtpriv->BT_Service==BT_Idle) ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_Idle\n"); ++ } ++ else if(pbtpriv->BT_Service==BT_OtherAction) ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_OtherAction\n"); ++ } ++ else if(pbtpriv->BT_Service==BT_Busy) ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_Busy\n"); ++ } ++ else if(pbtpriv->BT_Service==BT_PAN) ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_PAN\n"); ++ } ++ else ++ { ++ DBG_8192C("BT TYPE Set to ==> BT_OtherBusy\n"); ++ } ++ ++ //Add interrupt migration when bt is not in idel state (no traffic). ++ //suggestion by Victor. ++ if(pbtpriv->BT_Service!=BT_Idle)//EDCA_VI_PARAM modify ++ { ++ ++ rtw_write16(Adapter, 0x504, 0x0ccc); ++ rtw_write8(Adapter, 0x506, 0x54); ++ rtw_write8(Adapter, 0x507, 0x54); ++ ++ } ++ else ++ { ++ rtw_write8(Adapter, 0x506, 0x00); ++ rtw_write8(Adapter, 0x507, 0x00); ++ } ++ ++ rtw_write8(Adapter, 0x4fd, BT_State); ++ DBG_8192C("BT_SCO set 0x4fd to %x\n", BT_State); ++ return _TRUE; ++ } ++ } ++ ++ return _FALSE; ++ ++} ++ ++static BOOLEAN ++BT_WifiConnectChange( ++ IN PADAPTER Adapter ++ ) ++{ ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++// PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ static BOOLEAN bMediaConnect = _FALSE; ++ ++ //if(!pMgntInfo->bMediaConnect || MgntRoamingInProgress(pMgntInfo)) ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ++ { ++ bMediaConnect = _FALSE; ++ } ++ else ++ { ++ if(!bMediaConnect) ++ { ++ bMediaConnect = _TRUE; ++ return _TRUE; ++ } ++ bMediaConnect = _TRUE; ++ } ++ ++ return _FALSE; ++} ++ ++#define BT_RSSI_STATE_NORMAL_POWER BIT0 ++#define BT_RSSI_STATE_AMDPU_OFF BIT1 ++#define BT_RSSI_STATE_SPECIAL_LOW BIT2 ++#define BT_RSSI_STATE_BG_EDCA_LOW BIT3 ++ ++static s32 GET_UNDECORATED_AVERAGE_RSSI(PADAPTER Adapter) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ s32 average_rssi; ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE)) ++ { ++ average_rssi = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ } ++ else ++ { ++ average_rssi = pdmpriv->UndecoratedSmoothedPWDB; ++ } ++ return average_rssi; ++} ++ ++static u8 BT_RssiStateChange( ++ IN PADAPTER Adapter ++ ) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ //PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ s32 UndecoratedSmoothedPWDB; ++ u8 CurrBtRssiState = 0x00; ++ ++ ++ ++ ++ //if(pMgntInfo->bMediaConnect) // Default port ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ UndecoratedSmoothedPWDB = GET_UNDECORATED_AVERAGE_RSSI(Adapter); ++ } ++ else // associated entry pwdb ++ { ++ if(pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0) ++ UndecoratedSmoothedPWDB = 100; // No any RSSI information. Assume to be MAX. ++ else ++ UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ } ++ ++ // Check RSSI to determine HighPower/NormalPower state for BT coexistence. ++ if(UndecoratedSmoothedPWDB >= 67) ++ CurrBtRssiState &= (~BT_RSSI_STATE_NORMAL_POWER); ++ else if(UndecoratedSmoothedPWDB < 62) ++ CurrBtRssiState |= BT_RSSI_STATE_NORMAL_POWER; ++ ++ // Check RSSI to determine AMPDU setting for BT coexistence. ++ if(UndecoratedSmoothedPWDB >= 40) ++ CurrBtRssiState &= (~BT_RSSI_STATE_AMDPU_OFF); ++ else if(UndecoratedSmoothedPWDB <= 32) ++ CurrBtRssiState |= BT_RSSI_STATE_AMDPU_OFF; ++ ++ // Marked RSSI state. It will be used to determine BT coexistence setting later. ++ if(UndecoratedSmoothedPWDB < 35) ++ CurrBtRssiState |= BT_RSSI_STATE_SPECIAL_LOW; ++ else ++ CurrBtRssiState &= (~BT_RSSI_STATE_SPECIAL_LOW); ++ ++ // Check BT state related to BT_Idle in B/G mode. ++ if(UndecoratedSmoothedPWDB < 15) ++ CurrBtRssiState |= BT_RSSI_STATE_BG_EDCA_LOW; ++ else ++ CurrBtRssiState &= (~BT_RSSI_STATE_BG_EDCA_LOW); ++ ++ if(CurrBtRssiState != pbtpriv->BtRssiState) ++ { ++ pbtpriv->BtRssiState = CurrBtRssiState; ++ return _TRUE; ++ } ++ else ++ { ++ return _FALSE; ++ } ++} ++ ++static void dm_BTCoexist(PADAPTER Adapter ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ struct mlme_ext_info *pmlmeinfo = &Adapter->mlmeextpriv.mlmext_info; ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ //PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ //PRT_HIGH_THROUGHPUT pHTInfo = GET_HT_INFO(pMgntInfo); ++ ++ //PRX_TS_RECORD pRxTs = NULL; ++ u8 BT_gpio_mux; ++ ++ BOOLEAN bWifiConnectChange, bBtStateChange,bRssiStateChange; ++ ++ if(pbtpriv->bCOBT == _FALSE) return; ++ ++ if(!( pdmpriv->DMFlag & DYNAMIC_FUNC_BT)) return; ++ ++ if( (pbtpriv->BT_Coexist) &&(pbtpriv->BT_CoexistType == BT_CSR_BC4) && (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _FALSE) ) ++ { ++ bWifiConnectChange = BT_WifiConnectChange(Adapter); ++ bBtStateChange = BT_BTStateChange(Adapter); ++ bRssiStateChange = BT_RssiStateChange(Adapter); ++ ++ DBG_8192C("bWifiConnectChange %d, bBtStateChange %d,bRssiStateChange %d\n", ++ bWifiConnectChange,bBtStateChange,bRssiStateChange); ++ ++ // add by hpfan for debug message ++ BT_gpio_mux = rtw_read8(Adapter, REG_GPIO_MUXCFG); ++ DBG_8192C("BTCoexit Reg_0x40 (%2x)\n", BT_gpio_mux); ++ ++ if( bWifiConnectChange ||bBtStateChange ||bRssiStateChange ) ++ { ++ if(pbtpriv->BT_CUR_State) ++ { ++ ++ // Do not allow receiving A-MPDU aggregation. ++ if(pbtpriv->BT_Ampdu)// 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. ++ { ++ ++ if(pmlmeinfo->assoc_AP_vendor == ciscoAP) ++ { ++ if(pbtpriv->BT_Service!=BT_Idle) ++ { ++ if(pmlmeinfo->bAcceptAddbaReq) ++ { ++ DBG_8192C("BT_Disallow AMPDU \n"); ++ pmlmeinfo->bAcceptAddbaReq = _FALSE; ++ send_delba(Adapter,0, get_my_bssid(&(pmlmeinfo->network))); ++ } ++ } ++ else ++ { ++ if(!pmlmeinfo->bAcceptAddbaReq) ++ { ++ DBG_8192C("BT_Allow AMPDU RSSI >=40\n"); ++ pmlmeinfo->bAcceptAddbaReq = _TRUE; ++ } ++ } ++ } ++ else ++ { ++ if(!pmlmeinfo->bAcceptAddbaReq) ++ { ++ DBG_8192C("BT_Allow AMPDU BT Idle\n"); ++ pmlmeinfo->bAcceptAddbaReq = _TRUE; ++ } ++ } ++ } ++ ++#if 0 ++ else if((pHalData->bt_coexist.BT_Service==BT_SCO) || (pHalData->bt_coexist.BT_Service==BT_Busy)) ++ { ++ if(pHalData->bt_coexist.BtRssiState & BT_RSSI_STATE_AMDPU_OFF) ++ { ++ if(pMgntInfo->bBT_Ampdu && pHTInfo->bAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32\n")); ++ pHTInfo->bAcceptAddbaReq = FALSE; ++ if(GetTs(Adapter, (PTS_COMMON_INFO*)(&pRxTs), pMgntInfo->Bssid, 0, RX_DIR, FALSE)) ++ TsInitDelBA(Adapter, (PTS_COMMON_INFO)pRxTs, RX_DIR); ++ } ++ } ++ else ++ { ++ if(pMgntInfo->bBT_Ampdu && !pHTInfo->bAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU RSSI >=40\n")); ++ pHTInfo->bAcceptAddbaReq = TRUE; ++ } ++ } ++ } ++ else ++ { ++ if(pMgntInfo->bBT_Ampdu && !pHTInfo->bAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU BT not in SCO or BUSY\n")); ++ pHTInfo->bAcceptAddbaReq = TRUE; ++ } ++ } ++#endif ++ ++ if(pbtpriv->BT_Ant_isolation) ++ { ++ DBG_8192C("BT_IsolationLow\n"); ++ ++// 20100427 Joseph: Do not adjust Rate adaptive for BT coexist suggested by SD3. ++#if 0 ++ RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n")); ++ if(pMgntInfo->bUseRAMask) ++ { ++ // 20100407 Joseph: Fix rate adaptive modification for BT coexist. ++ // This fix is not complete yet. It shall also consider VWifi and Adhoc case, ++ // which connect with multiple STAs. ++ Adapter->HalFunc.UpdateHalRAMaskHandler( ++ Adapter, ++ FALSE, ++ 0, ++ NULL, ++ NULL, ++ pMgntInfo->RateAdaptive.RATRState, ++ RAMask_Normal); ++ } ++ else ++ { ++ Adapter->HalFunc.UpdateHalRATRTableHandler( ++ Adapter, ++ &pMgntInfo->dot11OperationalRateSet, ++ pMgntInfo->dot11HTOperationalRateSet,NULL); ++ } ++#endif ++ ++ // 20100415 Joseph: Modify BT coexist mechanism suggested by Yaying. ++ // Now we only enable HW BT coexist when BT in "Busy" state. ++ if(1)//pMgntInfo->LinkDetectInfo.NumRecvDataInPeriod >= 20) ++ { ++ if((pmlmeinfo->assoc_AP_vendor == ciscoAP) && ++ pbtpriv->BT_Service==BT_OtherAction) ++ { ++ DBG_8192C("BT_Turn ON Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0); ++ } ++ else ++ { ++ if((pbtpriv->BT_Service==BT_Busy) && ++ (pbtpriv->BtRssiState & BT_RSSI_STATE_NORMAL_POWER)) ++ { ++ DBG_8192C("BT_Turn ON Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0); ++ } ++ else if((pbtpriv->BT_Service==BT_OtherAction) && ++ (pbtpriv->BtRssiState & BT_RSSI_STATE_SPECIAL_LOW)) ++ { ++ DBG_8192C("BT_Turn ON Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0); ++ } ++ else if(pbtpriv->BT_Service==BT_PAN) ++ { ++ DBG_8192C("BT_Turn ON Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00); ++ } ++ else ++ { ++ DBG_8192C("BT_Turn OFF Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00); ++ } ++ } ++ } ++ else ++ { ++ DBG_8192C("BT: There is no Wifi traffic!! Turn off Coexist\n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00); ++ } ++ ++ if(1)//pMgntInfo->LinkDetectInfo.NumRecvDataInPeriod >= 20) ++ { ++ if(pbtpriv->BT_Service==BT_PAN) ++ { ++ DBG_8192C("BT_Turn ON Coexist(Reg0x44 = 0x10100)\n"); ++ rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x10100); ++ } ++ else ++ { ++ DBG_8192C("BT_Turn OFF Coexist(Reg0x44 = 0x0)\n"); ++ rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x0); ++ } ++ } ++ else ++ { ++ DBG_8192C("BT: There is no Wifi traffic!! Turn off Coexist(Reg0x44 = 0x0)\n"); ++ rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x0); ++ } ++ ++ // 20100430 Joseph: Integrate the BT coexistence EDCA tuning here. ++ if(pbtpriv->BtRssiState & BT_RSSI_STATE_NORMAL_POWER) ++ { ++ if(pbtpriv->BT_Service==BT_OtherBusy) ++ { ++ //pbtpriv->BtEdcaUL = 0x5ea72b; ++ //pbtpriv->BtEdcaDL = 0x5ea72b; ++ pbtpriv->BT_EDCA[UP_LINK] = 0x5ea72b; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea72b; ++ ++ DBG_8192C("BT in BT_OtherBusy state Tx (%d) >350 parameter(0x%x) = 0x%x\n", pbtpriv->Ratio_Tx ,REG_EDCA_BE_PARAM, 0x5ea72b); ++ } ++ else if(pbtpriv->BT_Service==BT_Busy) ++ { ++ //pbtpriv->BtEdcaUL = 0x5eb82f; ++ //pbtpriv->BtEdcaDL = 0x5eb82f; ++ ++ pbtpriv->BT_EDCA[UP_LINK] = 0x5eb82f; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0x5eb82f; ++ ++ DBG_8192C("BT in BT_Busy state parameter(0x%x) = 0x%x\n", REG_EDCA_BE_PARAM, 0x5eb82f); ++ } ++ else if(pbtpriv->BT_Service==BT_SCO) ++ { ++ if(pbtpriv->Ratio_Tx>160) ++ { ++ //pbtpriv->BtEdcaUL = 0x5ea72f; ++ //pbtpriv->BtEdcaDL = 0x5ea72f; ++ pbtpriv->BT_EDCA[UP_LINK] = 0x5ea72f; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea72f; ++ DBG_8192C("BT in BT_SCO state Tx (%d) >160 parameter(0x%x) = 0x%x\n",pbtpriv->Ratio_Tx, REG_EDCA_BE_PARAM, 0x5ea72f); ++ } ++ else ++ { ++ //pbtpriv->BtEdcaUL = 0x5ea32b; ++ //pbtpriv->BtEdcaDL = 0x5ea42b; ++ ++ pbtpriv->BT_EDCA[UP_LINK] = 0x5ea32b; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea42b; ++ ++ DBG_8192C("BT in BT_SCO state Tx (%d) <160 parameter(0x%x) = 0x%x\n", pbtpriv->Ratio_Tx,REG_EDCA_BE_PARAM, 0x5ea32f); ++ } ++ } ++ else ++ { ++ // BT coexistence mechanism does not control EDCA parameter. ++ //pbtpriv->BtEdcaUL = 0; ++ //pbtpriv->BtEdcaDL = 0; ++ ++ pbtpriv->BT_EDCA[UP_LINK] = 0; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0; ++ DBG_8192C("BT in State %d and parameter(0x%x) use original setting.\n",pbtpriv->BT_Service, REG_EDCA_BE_PARAM); ++ } ++ ++ if((pbtpriv->BT_Service!=BT_Idle) && ++ (pmlmeext->cur_wireless_mode == WIRELESS_MODE_G) && ++ (pbtpriv->BtRssiState & BT_RSSI_STATE_BG_EDCA_LOW)) ++ { ++ //pbtpriv->BtEdcaUL = 0x5eb82b; ++ //pbtpriv->BtEdcaDL = 0x5eb82b; ++ ++ pbtpriv->BT_EDCA[UP_LINK] = 0x5eb82b; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0x5eb82b; ++ ++ DBG_8192C("BT set parameter(0x%x) = 0x%x\n", REG_EDCA_BE_PARAM, 0x5eb82b); ++ } ++ } ++ else ++ { ++ // BT coexistence mechanism does not control EDCA parameter. ++ //pbtpriv->BtEdcaUL = 0; ++ //pbtpriv->BtEdcaDL = 0; ++ ++ pbtpriv->BT_EDCA[UP_LINK] = 0; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0; ++ } ++ ++ // 20100415 Joseph: Set RF register 0x1E and 0x1F for BT coexist suggested by Yaying. ++ if(pbtpriv->BT_Service!=BT_Idle) ++ { ++ DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n", 0xf); ++ PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, 0xf); ++ //RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1E[7:4] = 0x%x \n", 0xf)); ++ //PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, 0xf); ++ } ++ else ++ { ++ DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n",pbtpriv->BtRfRegOrigin1E); ++ PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, pbtpriv->BtRfRegOrigin1E); ++ //RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1F[7:4] = 0x%x \n", pHalData->bt_coexist.BtRfRegOrigin1F)); ++ //PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, pHalData->bt_coexist.BtRfRegOrigin1F); ++ } ++ } ++ else ++ { ++ DBG_8192C("BT_IsolationHigh\n"); ++ // Do nothing. ++ } ++ } ++ else ++ { ++ ++ if(pbtpriv->BT_Ampdu && !pmlmeinfo->bAcceptAddbaReq) ++ { ++ DBG_8192C("BT_Allow AMPDU bt is off\n"); ++ pmlmeinfo->bAcceptAddbaReq = _TRUE; ++ } ++ ++ DBG_8192C("BT_Turn OFF Coexist bt is off \n"); ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00); ++ ++ DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n", pbtpriv->BtRfRegOrigin1E); ++ PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, pbtpriv->BtRfRegOrigin1E); ++ //RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1F[7:4] = 0x%x \n", pHalData->bt_coexist.BtRfRegOrigin1F)); ++ //PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, pHalData->bt_coexist.BtRfRegOrigin1F); ++ ++ // BT coexistence mechanism does not control EDCA parameter since BT is disabled. ++ //pbtpriv->BtEdcaUL = 0; ++ //pbtpriv->BtEdcaDL = 0; ++ pbtpriv->BT_EDCA[UP_LINK] = 0; ++ pbtpriv->BT_EDCA[DOWN_LINK] = 0; ++ ++ ++// 20100427 Joseph: Do not adjust Rate adaptive for BT coexist suggested by SD3. ++#if 0 ++ RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n")); ++ if(pMgntInfo->bUseRAMask) ++ { ++ // 20100407 Joseph: Fix rate adaptive modification for BT coexist. ++ // This fix is not complete yet. It shall also consider VWifi and Adhoc case, ++ // which connect with multiple STAs. ++ Adapter->HalFunc.UpdateHalRAMaskHandler( ++ Adapter, ++ FALSE, ++ 0, ++ NULL, ++ NULL, ++ pMgntInfo->RateAdaptive.RATRState, ++ RAMask_Normal); ++ } ++ else ++ { ++ Adapter->HalFunc.UpdateHalRATRTableHandler( ++ Adapter, ++ &pMgntInfo->dot11OperationalRateSet, ++ pMgntInfo->dot11HTOperationalRateSet,NULL); ++ } ++#endif ++ } ++ } ++ } ++} ++ ++static void dm_InitBtCoexistDM( PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ ++ if( !pbtpriv->BT_Coexist ) return; ++ ++ pbtpriv->BtRfRegOrigin1E = (u8)PHY_QueryRFReg(Adapter, PathA, 0x1e, 0xf0); ++ pbtpriv->BtRfRegOrigin1F = (u8)PHY_QueryRFReg(Adapter, PathA, 0x1f, 0xf0); ++} ++ ++void rtl8192c_set_dm_bt_coexist(_adapter *padapter, u8 bStart) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ ++ pbtpriv->bCOBT = bStart; ++ send_delba(padapter,0, get_my_bssid(&(pmlmeinfo->network))); ++ send_delba(padapter,1, get_my_bssid(&(pmlmeinfo->network))); ++ ++} ++ ++void rtl8192c_issue_delete_ba(_adapter *padapter, u8 dir) ++{ ++ struct mlme_ext_info *pmlmeinfo = &padapter->mlmeextpriv.mlmext_info; ++ DBG_8192C("issue_delete_ba : %s...\n",(dir==0)?"RX_DIR":"TX_DIR"); ++ send_delba(padapter,dir, get_my_bssid(&(pmlmeinfo->network))); ++} ++ ++#endif ++ ++#if 0//def CONFIG_PCI_HCI ++ ++BOOLEAN ++BT_BTStateChange( ++ IN PADAPTER Adapter ++ ) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ ++ u4Byte temp, Polling, Ratio_Tx, Ratio_PRI; ++ u4Byte BT_Tx, BT_PRI; ++ u1Byte BT_State; ++ static u1Byte ServiceTypeCnt = 0; ++ u1Byte CurServiceType; ++ static u1Byte LastServiceType = BT_Idle; ++ ++ if(!pMgntInfo->bMediaConnect) ++ return FALSE; ++ ++ BT_State = PlatformEFIORead1Byte(Adapter, 0x4fd); ++/* ++ temp = PlatformEFIORead4Byte(Adapter, 0x488); ++ BT_Tx = (u2Byte)(((temp<<8)&0xff00)+((temp>>8)&0xff)); ++ BT_PRI = (u2Byte)(((temp>>8)&0xff00)+((temp>>24)&0xff)); ++ ++ temp = PlatformEFIORead4Byte(Adapter, 0x48c); ++ Polling = ((temp<<8)&0xff000000) + ((temp>>8)&0x00ff0000) + ++ ((temp<<8)&0x0000ff00) + ((temp>>8)&0x000000ff); ++ ++*/ ++ BT_Tx = PlatformEFIORead4Byte(Adapter, 0x488); ++ ++ RTPRINT(FBT, BT_TRACE, ("Ratio 0x488 =%x\n", BT_Tx)); ++ BT_Tx =BT_Tx & 0x00ffffff; ++ //RTPRINT(FBT, BT_TRACE, ("Ratio BT_Tx =%x\n", BT_Tx)); ++ ++ BT_PRI = PlatformEFIORead4Byte(Adapter, 0x48c); ++ ++ RTPRINT(FBT, BT_TRACE, ("Ratio Ratio 0x48c =%x\n", BT_PRI)); ++ BT_PRI =BT_PRI & 0x00ffffff; ++ //RTPRINT(FBT, BT_TRACE, ("Ratio BT_PRI =%x\n", BT_PRI)); ++ ++ ++ Polling = PlatformEFIORead4Byte(Adapter, 0x490); ++ //RTPRINT(FBT, BT_TRACE, ("Ratio 0x490 =%x\n", Polling)); ++ ++ ++ if(BT_Tx==0xffffffff && BT_PRI==0xffffffff && Polling==0xffffffffff && BT_State==0xff) ++ return FALSE; ++ ++ BT_State &= BIT0; ++ ++ if(BT_State != pHalData->bt_coexist.BT_CUR_State) ++ { ++ pHalData->bt_coexist.BT_CUR_State = BT_State; ++ ++ if(pMgntInfo->bRegBT_Sco == 3) ++ { ++ ServiceTypeCnt = 0; ++ ++ pHalData->bt_coexist.BT_Service = BT_Idle; ++ ++ RTPRINT(FBT, BT_TRACE, ("BT_%s\n", BT_State?"ON":"OFF")); ++ ++ BT_State = BT_State | ++ ((pHalData->bt_coexist.BT_Ant_isolation==1)?0:BIT1) |BIT2; ++ ++ PlatformEFIOWrite1Byte(Adapter, 0x4fd, BT_State); ++ RTPRINT(FBT, BT_TRACE, ("BT set 0x4fd to %x\n", BT_State)); ++ } ++ ++ return TRUE; ++ } ++ RTPRINT(FBT, BT_TRACE, ("bRegBT_Sco %d\n", pMgntInfo->bRegBT_Sco)); ++ ++ Ratio_Tx = BT_Tx*1000/Polling; ++ Ratio_PRI = BT_PRI*1000/Polling; ++ ++ pHalData->bt_coexist.Ratio_Tx=Ratio_Tx; ++ pHalData->bt_coexist.Ratio_PRI=Ratio_PRI; ++ ++ RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx)); ++ RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI)); ++ ++ ++ if(BT_State && pMgntInfo->bRegBT_Sco==3) ++ { ++ RTPRINT(FBT, BT_TRACE, ("bRegBT_Sco ==3 Follow Counter\n")); ++// if(BT_Tx==0xffff && BT_PRI==0xffff && Polling==0xffffffff) ++// { ++// ServiceTypeCnt = 0; ++// return FALSE; ++// } ++// else ++ { ++ /* ++ Ratio_Tx = BT_Tx*1000/Polling; ++ Ratio_PRI = BT_PRI*1000/Polling; ++ ++ pHalData->bt_coexist.Ratio_Tx=Ratio_Tx; ++ pHalData->bt_coexist.Ratio_PRI=Ratio_PRI; ++ ++ RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx)); ++ RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI)); ++ ++ */ ++ if((Ratio_Tx <= 50) && (Ratio_PRI <= 50)) ++ CurServiceType = BT_Idle; ++ else if((Ratio_PRI > 150) && (Ratio_PRI < 200)) ++ CurServiceType = BT_SCO; ++ else if((Ratio_Tx >= 200)&&(Ratio_PRI >= 200)) ++ CurServiceType = BT_Busy; ++ else if(Ratio_Tx >= 350) ++ CurServiceType = BT_OtherBusy; ++ else ++ CurServiceType=BT_OtherAction; ++ ++ } ++/* if(pHalData->bt_coexist.bStopCount) ++ { ++ ServiceTypeCnt=0; ++ pHalData->bt_coexist.bStopCount=FALSE; ++ } ++*/ ++ if(CurServiceType == BT_OtherBusy) ++ { ++ ServiceTypeCnt=2; ++ LastServiceType=CurServiceType; ++ } ++ else if(CurServiceType == LastServiceType) ++ { ++ if(ServiceTypeCnt<3) ++ ServiceTypeCnt++; ++ } ++ else ++ { ++ ServiceTypeCnt = 0; ++ LastServiceType = CurServiceType; ++ } ++ ++ if(ServiceTypeCnt==2) ++ { ++ pHalData->bt_coexist.BT_Service = LastServiceType; ++ BT_State = BT_State | ++ ((pHalData->bt_coexist.BT_Ant_isolation==1)?0:BIT1) | ++ ((pHalData->bt_coexist.BT_Service==BT_SCO)?0:BIT2); ++ ++ if(pHalData->bt_coexist.BT_Service==BT_Busy) ++ BT_State&= ~(BIT2); ++ ++ if(pHalData->bt_coexist.BT_Service==BT_SCO) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_SCO\n")); ++ } ++ else if(pHalData->bt_coexist.BT_Service==BT_Idle) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_Idle\n")); ++ } ++ else if(pHalData->bt_coexist.BT_Service==BT_OtherAction) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_OtherAction\n")); ++ } ++ else if(pHalData->bt_coexist.BT_Service==BT_Busy) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_Busy\n")); ++ } ++ else ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_OtherBusy\n")); ++ } ++ ++ //Add interrupt migration when bt is not in idel state (no traffic). ++ //suggestion by Victor. ++ if(pHalData->bt_coexist.BT_Service!=BT_Idle) ++ { ++ ++ PlatformEFIOWrite2Byte(Adapter, 0x504, 0x0ccc); ++ PlatformEFIOWrite1Byte(Adapter, 0x506, 0x54); ++ PlatformEFIOWrite1Byte(Adapter, 0x507, 0x54); ++ ++ } ++ else ++ { ++ PlatformEFIOWrite1Byte(Adapter, 0x506, 0x00); ++ PlatformEFIOWrite1Byte(Adapter, 0x507, 0x00); ++ } ++ ++ PlatformEFIOWrite1Byte(Adapter, 0x4fd, BT_State); ++ RTPRINT(FBT, BT_TRACE, ("BT_SCO set 0x4fd to %x\n", BT_State)); ++ return TRUE; ++ } ++ } ++ ++ return FALSE; ++ ++} ++ ++BOOLEAN ++BT_WifiConnectChange( ++ IN PADAPTER Adapter ++ ) ++{ ++ PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ static BOOLEAN bMediaConnect = FALSE; ++ ++ if(!pMgntInfo->bMediaConnect || MgntRoamingInProgress(pMgntInfo)) ++ { ++ bMediaConnect = FALSE; ++ } ++ else ++ { ++ if(!bMediaConnect) ++ { ++ bMediaConnect = TRUE; ++ return TRUE; ++ } ++ bMediaConnect = TRUE; ++ } ++ ++ return FALSE; ++} ++ ++BOOLEAN ++BT_RSSIChangeWithAMPDU( ++ IN PADAPTER Adapter ++ ) ++{ ++ PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(!Adapter->pNdisCommon->bRegBT_Ampdu || !Adapter->pNdisCommon->bRegAcceptAddbaReq) ++ return FALSE; ++ ++ RTPRINT(FBT, BT_TRACE, ("RSSI is %d\n",pHalData->UndecoratedSmoothedPWDB)); ++ ++ if((pHalData->UndecoratedSmoothedPWDB<=32) && pMgntInfo->pHTInfo->bAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32 Need change\n")); ++ return TRUE; ++ ++ } ++ else if((pHalData->UndecoratedSmoothedPWDB>=40) && !pMgntInfo->pHTInfo->bAcceptAddbaReq ) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU RSSI >=40, Need change\n")); ++ return TRUE; ++ } ++ else ++ return FALSE; ++ ++} ++ ++ ++VOID ++dm_BTCoexist( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; ++ static u1Byte LastTxPowerLvl = 0xff; ++ PRX_TS_RECORD pRxTs = NULL; ++ ++ BOOLEAN bWifiConnectChange, bBtStateChange,bRSSIChangeWithAMPDU; ++ ++ if( (pHalData->bt_coexist.BluetoothCoexist) && ++ (pHalData->bt_coexist.BT_CoexistType == BT_CSR_BC4) && ++ (!ACTING_AS_AP(Adapter)) ) ++ { ++ bWifiConnectChange = BT_WifiConnectChange(Adapter); ++ bBtStateChange = BT_BTStateChange(Adapter); ++ bRSSIChangeWithAMPDU = BT_RSSIChangeWithAMPDU(Adapter); ++ RTPRINT(FBT, BT_TRACE, ("bWifiConnectChange %d, bBtStateChange %d,LastTxPowerLvl %x, DynamicTxHighPowerLvl %x\n", ++ bWifiConnectChange,bBtStateChange,LastTxPowerLvl,pHalData->DynamicTxHighPowerLvl)); ++ if( bWifiConnectChange ||bBtStateChange || ++ (LastTxPowerLvl != pHalData->DynamicTxHighPowerLvl) ||bRSSIChangeWithAMPDU) ++ { ++ LastTxPowerLvl = pHalData->DynamicTxHighPowerLvl; ++ ++ if(pHalData->bt_coexist.BT_CUR_State) ++ { ++ // Do not allow receiving A-MPDU aggregation. ++ if((pHalData->bt_coexist.BT_Service==BT_SCO) || (pHalData->bt_coexist.BT_Service==BT_Busy)) ++ { ++ if(pHalData->UndecoratedSmoothedPWDB<=32) ++ { ++ if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32\n")); ++ pMgntInfo->pHTInfo->bAcceptAddbaReq = FALSE; ++ if(GetTs(Adapter, (PTS_COMMON_INFO*)(&pRxTs), pMgntInfo->Bssid, 0, RX_DIR, FALSE)) ++ TsInitDelBA(Adapter, (PTS_COMMON_INFO)pRxTs, RX_DIR); ++ } ++ } ++ else if(pHalData->UndecoratedSmoothedPWDB>=40) ++ { ++ if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU RSSI >=40\n")); ++ pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE; ++ } ++ } ++ } ++ else ++ { ++ if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU BT not in SCO or BUSY\n")); ++ pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE; ++ } ++ } ++ ++ if(pHalData->bt_coexist.BT_Ant_isolation) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_IsolationLow\n")); ++ RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n")); ++ Adapter->HalFunc.UpdateHalRATRTableHandler( ++ Adapter, ++ &pMgntInfo->dot11OperationalRateSet, ++ pMgntInfo->dot11HTOperationalRateSet,NULL); ++ ++ if(pHalData->bt_coexist.BT_Service==BT_SCO) ++ { ++ ++ RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist with SCO \n")); ++ PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14); ++ } ++ else if(pHalData->DynamicTxHighPowerLvl == TxHighPwrLevel_Normal) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Turn ON Coexist\n")); ++ PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0xb4); ++ } ++ else ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist\n")); ++ PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14); ++ } ++ } ++ else ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_IsolationHigh\n")); ++ // Do nothing. ++ } ++ } ++ else ++ { ++ if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq) ++ { ++ RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU bt is off\n")); ++ pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE; ++ } ++ ++ RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist bt is off \n")); ++ PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14); ++ ++ RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n")); ++ Adapter->HalFunc.UpdateHalRATRTableHandler( ++ Adapter, ++ &pMgntInfo->dot11OperationalRateSet, ++ pMgntInfo->dot11HTOperationalRateSet,NULL); ++ } ++ } ++ } ++} ++#endif ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: dm_CheckRfCtrlGPIO() ++ * ++ * Overview: Copy 8187B template for 9xseries. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 01/10/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++static VOID ++dm_CheckRfCtrlGPIO( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++#if defined (CONFIG_USB_HCI) || defined (CONFIG_SDIO_HCI) ++ #ifdef CONFIG_USB_HCI ++ // 2010/08/12 MH Add for CU selective suspend. ++ PRT_USB_DEVICE pDevice = GET_RT_USB_DEVICE(Adapter); ++ #else ++ PRT_SDIO_DEVICE pDevice = GET_RT_SDIO_DEVICE(Adapter); ++ #endif ++#endif ++ ++ if(!Adapter->MgntInfo.PowerSaveControl.bGpioRfSw) ++ return; ++ ++ RTPRINT(FPWR, PWRHW, ("dm_CheckRfCtrlGPIO \n")); ++ ++#if defined (CONFIG_USB_HCI) || defined (CONFIG_SDIO_HCI) ++ // Walk around for DTM test, we will not enable HW - radio on/off because r/w ++ // page 1 register before Lextra bus is enabled cause system fails when resuming ++ // from S4. 20080218, Emily ++ if(Adapter->bInHctTest) ++ return; ++ ++//#if ((HAL_CODE_BASE == RTL8192_S) ) ++ //Adapter->HalFunc.GPIOChangeRFHandler(Adapter, GPIORF_POLLING); ++//#else ++ // 2010/07/27 MH Only Minicard and support selective suspend, we can not turn off all MAC power to ++ // stop 8051. For dongle and minicard, we both support selective suspend mode. ++ //if(pDevice->RegUsbSS && Adapter->HalFunc.GetInterfaceSelectionHandler(Adapter) == INTF_SEL2_MINICARD) ++ ++ // ++ // 2010/08/12 MH We support severl power consumption combination as below. ++ // ++ // Power consumption combination ++ // SS Enable: (LPS disable + IPS + SW/HW radio off) ++ // 1. Dongle + PDN (support HW radio off) ++ // 2. Dongle + Normal (No HW radio off) ++ // 3. MiniCard + PDN (support HW radio off) ++ // 4. MiniCard + Normal (support HW radio off) ++ // ++ // SS Disable: (LPS + IPS + SW/HW radio off) ++ // 1. Dongle + PDN (support HW radio off) ++ // 2. Dongle + Normal (No HW radio off) ++ // 3. MiniCard + PDN (support HW radio off) ++ // 4. MiniCard + Normal (support HW radio off) ++ // ++ // For Power down module detection. We need to read power register no matter ++ // dongle or minicard, we will add the item is the detection method. ++ // ++ // ++ //vivi add du case ++ if ((IS_HARDWARE_TYPE_8192CU(Adapter)||IS_HARDWARE_TYPE_8192DU(Adapter)) ++ && pDevice->RegUsbSS) ++ { ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB SS Enabled\n")); ++ if (SUPPORT_HW_RADIO_DETECT(Adapter)) ++ { // Support HW radio detection ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB Card Type 2/3/4 support GPIO Detect\n")); ++ GpioDetectTimerStart(Adapter); ++ } ++ else ++ { // Dongle does not support HW radio detection.?? In the fufure?? ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB DONGLE Non-GPIO-Detect\n")); ++ } ++ } ++ else if (IS_HARDWARE_TYPE_8192CU(Adapter) || ++ IS_HARDWARE_TYPE_8723AU(Adapter)|| ++ IS_HARDWARE_TYPE_8192DU(Adapter) || ++ IS_HARDWARE_TYPE_8723AS(Adapter)) ++ { // Not support Selective suspend ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB SS Disable\n")); ++ if (SUPPORT_HW_RADIO_DETECT(Adapter)) ++ { ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB Card Type 2/3/4 support GPIO Detect\n")); ++ PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) ); ++ } ++ else ++ { ++ RT_TRACE(COMP_RF, DBG_LOUD, ("USB DONGLE Non-GPIO-Detect\n")); ++ } ++ } ++ else ++ { // CE only support noemal HW radio detection now. Support timers GPIO detection in SE/CU. ++ PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) ); ++ } ++//#endif ++#else if defined CONFIG_PCI_HCI ++ if(Adapter->bInHctTest) ++ return; ++ ++ // CE only support noemal HW radio detection now. We support timers GPIO detection in SE. ++ PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) ); ++#endif ++#endif ++} /* dm_CheckRfCtrlGPIO */ ++ ++static VOID ++dm_InitRateAdaptiveMask( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PRATE_ADAPTIVE pRA = (PRATE_ADAPTIVE)&pdmpriv->RateAdaptive; ++ ++ pRA->RATRState = DM_RATR_STA_INIT; ++ pRA->PreRATRState = DM_RATR_STA_INIT; ++ ++ if (pdmpriv->DM_Type == DM_Type_ByDriver) ++ pdmpriv->bUseRAMask = _TRUE; ++ else ++ pdmpriv->bUseRAMask = _FALSE; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: dm_RefreshRateAdaptiveMask() ++ * ++ * Overview: Update rate table mask according to rssi ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 05/27/2009 hpfan Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++static VOID ++dm_RefreshRateAdaptiveMask( IN PADAPTER pAdapter) ++{ ++#if 0 ++ PADAPTER pTargetAdapter; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ PMGNT_INFO pMgntInfo = &(ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, TRUE)->MgntInfo); ++ PRATE_ADAPTIVE pRA = (PRATE_ADAPTIVE)&pMgntInfo->RateAdaptive; ++ u4Byte LowRSSIThreshForRA = 0, HighRSSIThreshForRA = 0; ++ ++ if(pAdapter->bDriverStopped) ++ { ++ RT_TRACE(COMP_RATR, DBG_TRACE, ("<---- dm_RefreshRateAdaptiveMask(): driver is going to unload\n")); ++ return; ++ } ++ ++ if(!pMgntInfo->bUseRAMask) ++ { ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("<---- dm_RefreshRateAdaptiveMask(): driver does not control rate adaptive mask\n")); ++ return; ++ } ++ ++ // if default port is connected, update RA table for default port (infrastructure mode only) ++ if(pAdapter->MgntInfo.mAssoc && (!ACTING_AS_AP(pAdapter))) ++ { ++ ++ // decide rastate according to rssi ++ switch (pRA->PreRATRState) ++ { ++ case DM_RATR_STA_HIGH: ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 20; ++ break; ++ ++ case DM_RATR_STA_MIDDLE: ++ HighRSSIThreshForRA = 55; ++ LowRSSIThreshForRA = 20; ++ break; ++ ++ case DM_RATR_STA_LOW: ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 25; ++ break; ++ ++ default: ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 20; ++ break; ++ } ++ ++ if(pHalData->UndecoratedSmoothedPWDB > (s4Byte)HighRSSIThreshForRA) ++ pRA->RATRState = DM_RATR_STA_HIGH; ++ else if(pHalData->UndecoratedSmoothedPWDB > (s4Byte)LowRSSIThreshForRA) ++ pRA->RATRState = DM_RATR_STA_MIDDLE; ++ else ++ pRA->RATRState = DM_RATR_STA_LOW; ++ ++ if(pRA->PreRATRState != pRA->RATRState) ++ { ++ RT_PRINT_ADDR(COMP_RATR, DBG_LOUD, ("Target AP addr : "), pMgntInfo->Bssid); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI = %d\n", pHalData->UndecoratedSmoothedPWDB)); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI_LEVEL = %d\n", pRA->RATRState)); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("PreState = %d, CurState = %d\n", pRA->PreRATRState, pRA->RATRState)); ++ pAdapter->HalFunc.UpdateHalRAMaskHandler( ++ pAdapter, ++ FALSE, ++ 0, ++ NULL, ++ NULL, ++ pRA->RATRState); ++ pRA->PreRATRState = pRA->RATRState; ++ } ++ } ++ ++ // ++ // The following part configure AP/VWifi/IBSS rate adaptive mask. ++ // ++ if(ACTING_AS_AP(pAdapter) || ACTING_AS_IBSS(pAdapter)) ++ { ++ pTargetAdapter = pAdapter; ++ } ++ else ++ { ++ pTargetAdapter = ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, FALSE); ++ if(!ACTING_AS_AP(pTargetAdapter)) ++ pTargetAdapter = NULL; ++ } ++ ++ // if extension port (softap) is started, updaet RA table for more than one clients associate ++ if(pTargetAdapter != NULL) ++ { ++ int i; ++ PRT_WLAN_STA pEntry; ++ PRATE_ADAPTIVE pEntryRA; ++ ++ for(i = 0; i < ASSOCIATE_ENTRY_NUM; i++) ++ { ++ if( pTargetAdapter->MgntInfo.AsocEntry[i].bUsed && pTargetAdapter->MgntInfo.AsocEntry[i].bAssociated) ++ { ++ pEntry = pTargetAdapter->MgntInfo.AsocEntry+i; ++ pEntryRA = &pEntry->RateAdaptive; ++ ++ switch (pEntryRA->PreRATRState) ++ { ++ case DM_RATR_STA_HIGH: ++ { ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 20; ++ } ++ break; ++ ++ case DM_RATR_STA_MIDDLE: ++ { ++ HighRSSIThreshForRA = 55; ++ LowRSSIThreshForRA = 20; ++ } ++ break; ++ ++ case DM_RATR_STA_LOW: ++ { ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 25; ++ } ++ break; ++ ++ default: ++ { ++ HighRSSIThreshForRA = 50; ++ LowRSSIThreshForRA = 20; ++ } ++ } ++ ++ if(pEntry->rssi_stat.UndecoratedSmoothedPWDB > (s4Byte)HighRSSIThreshForRA) ++ pEntryRA->RATRState = DM_RATR_STA_HIGH; ++ else if(pEntry->rssi_stat.UndecoratedSmoothedPWDB > (s4Byte)LowRSSIThreshForRA) ++ pEntryRA->RATRState = DM_RATR_STA_MIDDLE; ++ else ++ pEntryRA->RATRState = DM_RATR_STA_LOW; ++ ++ if(pEntryRA->PreRATRState != pEntryRA->RATRState) ++ { ++ RT_PRINT_ADDR(COMP_RATR, DBG_LOUD, ("AsocEntry addr : "), pEntry->MacAddr); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI = %d\n", pEntry->rssi_stat.UndecoratedSmoothedPWDB)); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI_LEVEL = %d\n", pEntryRA->RATRState)); ++ RT_TRACE(COMP_RATR, DBG_LOUD, ("PreState = %d, CurState = %d\n", pEntryRA->PreRATRState, pEntryRA->RATRState)); ++ pAdapter->HalFunc.UpdateHalRAMaskHandler( ++ pTargetAdapter, ++ FALSE, ++ pEntry->AID+1, ++ pEntry->MacAddr, ++ pEntry, ++ pEntryRA->RATRState); ++ pEntryRA->PreRATRState = pEntryRA->RATRState; ++ } ++ ++ } ++ } ++ } ++#endif ++} ++ ++static VOID ++dm_CheckProtection( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0 ++ PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ u1Byte CurRate, RateThreshold; ++ ++ if(pMgntInfo->pHTInfo->bCurBW40MHz) ++ RateThreshold = MGN_MCS1; ++ else ++ RateThreshold = MGN_MCS3; ++ ++ if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold) ++ { ++ pMgntInfo->bDmDisableProtect = TRUE; ++ DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); ++ } ++ else ++ { ++ pMgntInfo->bDmDisableProtect = FALSE; ++ DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); ++ } ++#endif ++} ++ ++static VOID ++dm_CheckStatistics( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0 ++ if(!Adapter->MgntInfo.bMediaConnect) ++ return; ++ ++ //2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly. ++ rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) ); ++ ++ // Calculate current Tx Rate(Successful transmited!!) ++ ++ // Calculate current Rx Rate(Successful received!!) ++ ++ //for tx tx retry count ++ rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) ); ++#endif ++} ++ ++static void dm_CheckPbcGPIO(_adapter *padapter) ++{ ++ u8 tmp1byte; ++ u8 bPbcPressed = _FALSE; ++ int i=0; ++ ++ if(!padapter->registrypriv.hw_wps_pbc) ++ return; ++ ++ do ++ { ++ i++; ++#ifdef CONFIG_USB_HCI ++ tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); ++ tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT); ++ rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as output mode ++ ++ tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); ++ rtw_write8(padapter, GPIO_IN, tmp1byte); //reset the floating voltage level ++ ++ tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); ++ tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); ++ rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as input mode ++ ++ tmp1byte =rtw_read8(padapter, GPIO_IN); ++ ++ if (tmp1byte == 0xff) ++ { ++ bPbcPressed = _FALSE; ++ break ; ++ } ++ ++ if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT) ++ { ++ bPbcPressed = _TRUE; ++ ++ if(i<=3) ++ rtw_msleep_os(50); ++ } ++#else ++ tmp1byte = rtw_read8(padapter, GPIO_IN); ++ //RT_TRACE(COMP_IO, DBG_TRACE, ("dm_CheckPbcGPIO - %x\n", tmp1byte)); ++ ++ if (tmp1byte == 0xff || padapter->init_adpt_in_progress) ++ { ++ bPbcPressed = _FALSE; ++ break ; ++ } ++ ++ if((tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)==0) ++ { ++ bPbcPressed = _TRUE; ++ ++ if(i<=3) ++ rtw_msleep_os(50); ++ } ++#endif ++ ++ }while(i<=3 && bPbcPressed == _TRUE); ++ ++ if( _TRUE == bPbcPressed) ++ { ++ // Here we only set bPbcPressed to true ++ // After trigger PBC, the variable will be set to false ++ DBG_8192C("CheckPbcGPIO - PBC is pressed, try_cnt=%d\n", i-1); ++ ++#ifdef RTK_DMP_PLATFORM ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) ++ kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_NET_PBC); ++#else ++ kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_NET_PBC); ++#endif ++#else ++ ++ if ( padapter->pid[0] == 0 ) ++ { // 0 is the default value and it means the application monitors the HW PBC doesn't privde its pid to driver. ++ return; ++ } ++ ++#ifdef PLATFORM_LINUX ++ rtw_signal_process(padapter->pid[0], SIGUSR1); ++#endif ++#endif ++ } ++} ++ ++#ifdef CONFIG_PCI_HCI ++// ++// Description: ++// Perform interrupt migration dynamically to reduce CPU utilization. ++// ++// Assumption: ++// 1. Do not enable migration under WIFI test. ++// ++// Created by Roger, 2010.03.05. ++// ++VOID ++dm_InterruptMigration( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ BOOLEAN bCurrentIntMt, bCurrentACIntDisable; ++ BOOLEAN IntMtToSet = _FALSE; ++ BOOLEAN ACIntToSet = _FALSE; ++ ++ ++ // Retrieve current interrupt migration and Tx four ACs IMR settings first. ++ bCurrentIntMt = pHalData->bInterruptMigration; ++ bCurrentACIntDisable = pHalData->bDisableTxInt; ++ ++ // ++ // Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics ++ // when interrupt migration is set before. 2010.03.05. ++ // ++ if(!Adapter->registrypriv.wifi_spec && ++ (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && ++ pmlmepriv->LinkDetectInfo.bHigherBusyTraffic) ++ { ++ IntMtToSet = _TRUE; ++ ++ // To check whether we should disable Tx interrupt or not. ++ if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic ) ++ ACIntToSet = _TRUE; ++ } ++ ++ //Update current settings. ++ if( bCurrentIntMt != IntMtToSet ){ ++ DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet); ++ if(IntMtToSet) ++ { ++ // ++ // Set interrrupt migration timer and corresponging Tx/Rx counter. ++ // timer 25ns*0xfa0=100us for 0xf packets. ++ // 2010.03.05. ++ // ++ rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx ++ pHalData->bInterruptMigration = IntMtToSet; ++ } ++ else ++ { ++ // Reset all interrupt migration settings. ++ rtw_write32(Adapter, REG_INT_MIG, 0); ++ pHalData->bInterruptMigration = IntMtToSet; ++ } ++ } ++ ++ /*if( bCurrentACIntDisable != ACIntToSet ){ ++ DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet); ++ if(ACIntToSet) // Disable four ACs interrupts. ++ { ++ // ++ // Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization. ++ // When extremely highly Rx OK occurs, we will disable Tx interrupts. ++ // 2010.03.05. ++ // ++ UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS ); ++ pHalData->bDisableTxInt = ACIntToSet; ++ } ++ else// Enable four ACs interrupts. ++ { ++ UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 ); ++ pHalData->bDisableTxInt = ACIntToSet; ++ } ++ }*/ ++ ++} ++ ++#endif ++ ++// ++// Initialize GPIO setting registers ++// ++static void ++dm_InitGPIOSetting( ++ IN PADAPTER Adapter ++ ) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ ++ u8 tmp1byte; ++ ++ tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG); ++ tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT); ++ ++#ifdef CONFIG_BT_COEXIST ++ // UMB-B cut bug. We need to support the modification. ++ if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) && ++ pHalData->bt_coexist.BT_Coexist) ++ { ++ tmp1byte |= (BIT5); ++ } ++#endif ++ rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte); ++ ++} ++ ++static void update_EDCA_param(_adapter *padapter) ++{ ++ u32 trafficIndex; ++ u32 edca_param; ++ u64 cur_tx_bytes = 0; ++ u64 cur_rx_bytes = 0; ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct recv_priv *precvpriv = &(padapter->recvpriv); ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ u8 bbtchange = _FALSE; ++#endif ++ ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ //associated AP ++ if ((pregpriv->wifi_spec == 1) || (pmlmeinfo->HT_enable == 0)) ++ { ++ return; ++ } ++ ++ if (pmlmeinfo->assoc_AP_vendor >= maxAP) ++ { ++ return; ++ } ++ ++ cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes; ++ cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes; ++ ++ //traffic, TX or RX ++ if((pmlmeinfo->assoc_AP_vendor == ralinkAP)||(pmlmeinfo->assoc_AP_vendor == atherosAP)) ++ { ++ if (cur_tx_bytes > (cur_rx_bytes << 2)) ++ { // Uplink TP is present. ++ trafficIndex = UP_LINK; ++ } ++ else ++ { // Balance TP is present. ++ trafficIndex = DOWN_LINK; ++ } ++ } ++ else ++ { ++ if (cur_rx_bytes > (cur_tx_bytes << 2)) ++ { // Downlink TP is present. ++ trafficIndex = DOWN_LINK; ++ } ++ else ++ { // Balance TP is present. ++ trafficIndex = UP_LINK; ++ } ++ } ++ ++#ifdef CONFIG_BT_COEXIST ++ if(pbtpriv->BT_Coexist) ++ { ++ if( (pbtpriv->BT_EDCA[UP_LINK]!=0) || (pbtpriv->BT_EDCA[DOWN_LINK]!=0)) ++ { ++ bbtchange = _TRUE; ++ } ++ } ++#endif ++ ++ if (pdmpriv->prv_traffic_idx != trafficIndex) ++ { ++#if 0 ++#ifdef CONFIG_BT_COEXIST ++ if(_TRUE == bbtchange) ++ rtw_write32(padapter, REG_EDCA_BE_PARAM, pbtpriv->BT_EDCA[trafficIndex]); ++ else ++#endif ++ //adjust EDCA parameter for BE queue ++ //fire_write_MAC_cmd(padapter, EDCA_BE_PARAM, EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]); ++ rtw_write32(padapter, REG_EDCA_BE_PARAM, EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]); ++ ++#else ++ if((pmlmeinfo->assoc_AP_vendor == ciscoAP) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N)) ++ { ++ edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]; ++ } ++ else if((pmlmeinfo->assoc_AP_vendor == airgocapAP) && ++ ((pmlmeext->cur_wireless_mode == WIRELESS_11G) ||(pmlmeext->cur_wireless_mode == WIRELESS_11BG))) ++ { ++ edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]; ++ } ++ else ++ { ++ edca_param = EDCAParam[unknownAP][trafficIndex]; ++ } ++ ++#ifdef CONFIG_BT_COEXIST ++ if(_TRUE == bbtchange) ++ edca_param = pbtpriv->BT_EDCA[trafficIndex]; ++#endif ++ ++ rtw_write32(padapter, REG_EDCA_BE_PARAM, edca_param); ++#endif ++ pdmpriv->prv_traffic_idx = trafficIndex; ++ } ++ ++//exit_update_EDCA_param: ++ ++ pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes; ++ precvpriv->last_rx_bytes = precvpriv->rx_bytes; ++ ++ return; ++} ++ ++static void dm_InitDynamicBBPowerSaving( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PS_T *pPSTable = &pdmpriv->DM_PSTable; ++ ++ pPSTable->PreCCAState = CCA_MAX; ++ pPSTable->CurCCAState = CCA_MAX; ++ pPSTable->PreRFState = RF_MAX; ++ pPSTable->CurRFState = RF_MAX; ++ pPSTable->Rssi_val_min = 0; ++} ++ ++static void dm_1R_CCA( ++ IN PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PS_T *pPSTable = &pdmpriv->DM_PSTable; ++ ++ if(pPSTable->Rssi_val_min != 0) ++ { ++ if(pPSTable->PreCCAState == CCA_2R) ++ { ++ if(pPSTable->Rssi_val_min >= 35) ++ pPSTable->CurCCAState = CCA_1R; ++ else ++ pPSTable->CurCCAState = CCA_2R; ++ } ++ else{ ++ if(pPSTable->Rssi_val_min <= 30) ++ pPSTable->CurCCAState = CCA_2R; ++ else ++ pPSTable->CurCCAState = CCA_1R; ++ } ++ } ++ else ++ pPSTable->CurCCAState=CCA_MAX; ++ ++ if(pPSTable->PreCCAState != pPSTable->CurCCAState) ++ { ++ if(pPSTable->CurCCAState == CCA_1R) ++ { ++ if(pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable , bMaskByte0, 0x13); ++ PHY_SetBBReg(pAdapter, 0xe70, bMaskByte3, 0x20); ++ } ++ else ++ { ++ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable , bMaskByte0, 0x23); ++ PHY_SetBBReg(pAdapter, 0xe70, 0x7fc00000, 0x10c); // Set RegE70[30:22] = 9b'100001100 ++ } ++ } ++ else ++ { ++ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, bMaskByte0, 0x33); ++ PHY_SetBBReg(pAdapter,0xe70, bMaskByte3, 0x63); ++ } ++ pPSTable->PreCCAState = pPSTable->CurCCAState; ++ } ++ //DBG_8192C("dm_1R_CCA(): CCAStage=%x\n", pPSTable->CurCCAState); ++} ++ ++void ++rtl8192c_dm_RF_Saving( ++ IN PADAPTER pAdapter, ++ IN u8 bForceInNormal ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PS_T *pPSTable = &pdmpriv->DM_PSTable; ++ ++ if(pdmpriv->initialize == 0){ ++ pdmpriv->rf_saving_Reg874 = (PHY_QueryBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, bMaskDWord)&0x1CC000)>>14; ++ pdmpriv->rf_saving_RegC70 = (PHY_QueryBBReg(pAdapter, rOFDM0_AGCParameter1, bMaskDWord)&BIT3)>>3; ++ pdmpriv->rf_saving_Reg85C = (PHY_QueryBBReg(pAdapter, rFPGA0_XCD_SwitchControl, bMaskDWord)&0xFF000000)>>24; ++ pdmpriv->rf_saving_RegA74 = (PHY_QueryBBReg(pAdapter, 0xa74, bMaskDWord)&0xF000)>>12; ++ //Reg818 = PHY_QueryBBReg(pAdapter, 0x818, bMaskDWord); ++ pdmpriv->initialize = 1; ++ } ++ ++ if(!bForceInNormal) ++ { ++ if(pPSTable->Rssi_val_min != 0) ++ { ++ ++ if(pPSTable->PreRFState == RF_Normal) ++ { ++ #ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV ++ if(pPSTable->Rssi_val_min >= 50) ++ #else ++ if(pPSTable->Rssi_val_min >= 30) ++ #endif ++ pPSTable->CurRFState = RF_Save; ++ else ++ pPSTable->CurRFState = RF_Normal; ++ } ++ else{ ++ #ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV ++ if(pPSTable->Rssi_val_min <= 45) ++ #else ++ if(pPSTable->Rssi_val_min <= 25) ++ #endif ++ pPSTable->CurRFState = RF_Normal; ++ else ++ pPSTable->CurRFState = RF_Save; ++ } ++ } ++ else ++ pPSTable->CurRFState=RF_MAX; ++ } ++ else ++ { ++ pPSTable->CurRFState = RF_Normal; ++ } ++ ++ if(pPSTable->PreRFState != pPSTable->CurRFState) ++ { ++ if(pPSTable->CurRFState == RF_Save) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW , 0x1C0000, 0x2); //Reg874[20:18]=3'b010 ++ PHY_SetBBReg(pAdapter, rOFDM0_AGCParameter1, BIT3, 0); //RegC70[3]=1'b0 ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_SwitchControl, 0xFF000000, 0x63); //Reg85C[31:24]=0x63 ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, 0xC000, 0x2); //Reg874[15:14]=2'b10 ++ PHY_SetBBReg(pAdapter, 0xa74, 0xF000, 0x3); //RegA75[7:4]=0x3 ++ PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x0); //Reg818[28]=1'b0 ++ PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x1); //Reg818[28]=1'b1 ++ DBG_8192C("%s(): RF_Save\n", __FUNCTION__); ++ } ++ else ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW , 0x1CC000, pdmpriv->rf_saving_Reg874); ++ PHY_SetBBReg(pAdapter, rOFDM0_AGCParameter1, BIT3, pdmpriv->rf_saving_RegC70); ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_SwitchControl, 0xFF000000, pdmpriv->rf_saving_Reg85C); ++ PHY_SetBBReg(pAdapter, 0xa74, 0xF000, pdmpriv->rf_saving_RegA74); ++ PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x0); ++ DBG_8192C("%s(): RF_Normal\n", __FUNCTION__); ++ } ++ pPSTable->PreRFState = pPSTable->CurRFState; ++ } ++} ++ ++static void ++dm_DynamicBBPowerSaving( ++IN PADAPTER pAdapter ++ ) ++{ ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct mlme_priv *pmlmepriv = &pAdapter->mlmepriv; ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PS_T *pPSTable = &pdmpriv->DM_PSTable; ++ ++ //1 1.Determine the minimum RSSI ++ if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) && ++ (pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0)) ++ { ++ pPSTable->Rssi_val_min = 0; ++ //RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("Not connected to any \n")); ++ } ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) // Default port ++ { ++ //if(ACTING_AS_AP(pAdapter) || pMgntInfo->mIbss) ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)) //todo: AP Mode ++ { ++ pPSTable->Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("AP Client PWDB = 0x%lx \n", pPSTable->Rssi_val_min)); ++ } ++ else ++ { ++ pPSTable->Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("STA Default Port PWDB = 0x%lx \n", pPSTable->Rssi_val_min)); ++ } ++ } ++ else // associated entry pwdb ++ { ++ pPSTable->Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB; ++ //RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("AP Ext Port PWDB = 0x%lx \n", pPSTable->Rssi_val_min)); ++ } ++ ++ //1 2.Power Saving for 92C ++ if(IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ //dm_1R_CCA(pAdapter); ++ } ++ ++ // 20100628 Joseph: Turn off BB power save for 88CE because it makesthroughput unstable. ++ // 20100831 Joseph: Turn ON BB power save again after modifying AGC delay from 900ns to 600ns. ++ //1 3.Power Saving for 88C ++ else ++ { ++ rtl8192c_dm_RF_Saving(pAdapter, _FALSE); ++ } ++} ++ ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++// Add new function to reset the state of antenna diversity before link. ++// ++void SwAntDivResetBeforeLink8192C(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ ++ pDM_SWAT_Table->SWAS_NoLink_State = 0; ++} ++ ++// Compare RSSI for deciding antenna ++void SwAntDivCompare8192C(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if((0 != pHalData->AntDivCfg) && (!IS_92C_SERIAL(pHalData->VersionID)) ) ++ { ++ //DBG_8192C("update_network=> orgRSSI(%d)(%d),newRSSI(%d)(%d)\n",dst->Rssi,query_rx_pwr_percentage(dst->Rssi), ++ // src->Rssi,query_rx_pwr_percentage(src->Rssi)); ++ //select optimum_antenna for before linked =>For antenna diversity ++ if(dst->Rssi >= src->Rssi )//keep org parameter ++ { ++ src->Rssi = dst->Rssi; ++ src->PhyInfo.Optimum_antenna = dst->PhyInfo.Optimum_antenna; ++ } ++ } ++} ++ ++// Add new function to reset the state of antenna diversity before link. ++u8 SwAntDivBeforeLink8192C(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ ++ // Condition that does not need to use antenna diversity. ++ if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0)) ++ { ++ //DBG_8192C("SwAntDivBeforeLink8192C(): No AntDiv Mechanism.\n"); ++ return _FALSE; ++ } ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ pDM_SWAT_Table->SWAS_NoLink_State = 0; ++ return _FALSE; ++ } ++ // Since driver is going to set BB register, it shall check if there is another thread controlling BB/RF. ++/* ++ if(pHalData->eRFPowerState!=eRfOn || pMgntInfo->RFChangeInProgress || pMgntInfo->bMediaConnect) ++ { ++ ++ ++ RT_TRACE(COMP_SWAS, DBG_LOUD, ++ ("SwAntDivCheckBeforeLink8192C(): RFChangeInProgress(%x), eRFPowerState(%x)\n", ++ pMgntInfo->RFChangeInProgress, ++ pHalData->eRFPowerState)); ++ ++ pDM_SWAT_Table->SWAS_NoLink_State = 0; ++ ++ return FALSE; ++ } ++*/ ++ ++ if(pDM_SWAT_Table->SWAS_NoLink_State == 0){ ++ //switch channel ++ pDM_SWAT_Table->SWAS_NoLink_State = 1; ++ pDM_SWAT_Table->CurAntenna = (pDM_SWAT_Table->CurAntenna==Antenna_A)?Antenna_B:Antenna_A; ++ ++ //PHY_SetBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300, pDM_SWAT_Table->CurAntenna); ++ rtw_antenna_select_cmd(Adapter, pDM_SWAT_Table->CurAntenna, _FALSE); ++ //DBG_8192C("%s change antenna to ANT_( %s ).....\n",__FUNCTION__, (pDM_SWAT_Table->CurAntenna==Antenna_A)?"A":"B"); ++ return _TRUE; ++ } ++ else ++ { ++ pDM_SWAT_Table->SWAS_NoLink_State = 0; ++ return _FALSE; ++ } ++ ++ ++ ++} ++#endif ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++// ++// 20100514 Luke/Joseph: ++// Add new function to reset antenna diversity state after link. ++// ++void ++SwAntDivRestAfterLink8192C( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ ++ if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0)) ++ return; ++ ++ //DBG_8192C("======> SwAntDivRestAfterLink <========== \n"); ++ pHalData->RSSI_cnt_A= 0; ++ pHalData->RSSI_cnt_B= 0; ++ pHalData->RSSI_test = _FALSE; ++ ++ pDM_SWAT_Table->try_flag = 0xff; ++ pDM_SWAT_Table->RSSI_Trying = 0; ++ pDM_SWAT_Table->SelectAntennaMap=0xAA; ++ pDM_SWAT_Table->CurAntenna = pHalData->CurAntenna; ++ pDM_SWAT_Table->PreAntenna = pHalData->CurAntenna; ++ ++ pdmpriv->lastTxOkCnt=0; ++ pdmpriv->lastRxOkCnt=0; ++ ++ pdmpriv->TXByteCnt_A=0; ++ pdmpriv->TXByteCnt_B=0; ++ pdmpriv->RXByteCnt_A=0; ++ pdmpriv->RXByteCnt_B=0; ++ pdmpriv->DoubleComfirm=0; ++ pdmpriv->TrafficLoad = TRAFFIC_LOW; ++ ++} ++ ++ ++// ++// 20100514 Luke/Joseph: ++// Add new function for antenna diversity after link. ++// This is the main function of antenna diversity after link. ++// This function is called in HalDmWatchDog() and dm_SW_AntennaSwitchCallback(). ++// HalDmWatchDog() calls this function with SWAW_STEP_PEAK to initialize the antenna test. ++// In SWAW_STEP_PEAK, another antenna and a 500ms timer will be set for testing. ++// After 500ms, dm_SW_AntennaSwitchCallback() calls this function to compare the signal just ++// listened on the air with the RSSI of original antenna. ++// It chooses the antenna with better RSSI. ++// There is also a aged policy for error trying. Each error trying will cost more 5 seconds waiting ++// penalty to get next try. ++// ++static VOID ++dm_SW_AntennaSwitch( ++ PADAPTER Adapter, ++ u8 Step ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ s32 curRSSI=100, RSSI_A, RSSI_B; ++ u64 curTxOkCnt, curRxOkCnt; ++ u64 CurByteCnt = 0, PreByteCnt = 0; ++ u8 nextAntenna = 0; ++ u8 Score_A=0, Score_B=0; ++ u8 i; ++ ++ // Condition that does not need to use antenna diversity. ++ if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0)) ++ { ++ //RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): No AntDiv Mechanism.\n")); ++ return; ++ } ++ // If dynamic ant_div is disabled. ++ if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_ANT_DIV) ) ++ { ++ return; ++ } ++ ++ if (check_fwstate(&Adapter->mlmepriv, _FW_LINKED) ==_FALSE) ++ return; ++#if 0 //to do ++ // Radio off: Status reset to default and return. ++ if(pHalData->eRFPowerState==eRfOff) ++ { ++ SwAntDivRestAfterLink(Adapter); ++ return; ++ } ++#endif ++ //DBG_8192C("\n............................ %s.........................\n",__FUNCTION__); ++ // Handling step mismatch condition. ++ // Peak step is not finished at last time. Recover the variable and check again. ++ if( Step != pDM_SWAT_Table->try_flag ) ++ { ++ SwAntDivRestAfterLink8192C(Adapter); ++ } ++ ++ ++ if(pDM_SWAT_Table->try_flag == 0xff) ++ { ++#if 0 ++ // Select RSSI checking target ++ if(pMgntInfo->mAssoc && !ACTING_AS_AP(Adapter)) ++ { ++ // Target: Infrastructure mode AP. ++ pHalData->RSSI_target = NULL; ++ RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): RSSI_target is DEF AP!\n")); ++ } ++ else ++ { ++ u8 index = 0; ++ PRT_WLAN_STA pEntry = NULL; ++ PADAPTER pTargetAdapter = NULL; ++ ++ if( pMgntInfo->mIbss || ACTING_AS_AP(Adapter) ) ++ { ++ // Target: AP/IBSS peer. ++ pTargetAdapter = Adapter; ++ } ++ else if(ACTING_AS_AP(ADJUST_TO_ADAPTIVE_ADAPTER(Adapter, FALSE))) ++ { ++ // Target: VWIFI peer. ++ pTargetAdapter = ADJUST_TO_ADAPTIVE_ADAPTER(Adapter, FALSE); ++ } ++ ++ if(pTargetAdapter != NULL) ++ { ++ for(index=0; indexbAssociated) ++ break; ++ } ++ } ++ } ++ ++ if(pEntry == NULL) ++ { ++ SwAntDivRestAfterLink(Adapter); ++ RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): No Link.\n")); ++ return; ++ } ++ else ++ { ++ pHalData->RSSI_target = pEntry; ++ RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): RSSI_target is PEER STA\n")); ++ } ++ } ++ ++ ++#endif ++ ++ pHalData->RSSI_cnt_A= 0; ++ pHalData->RSSI_cnt_B= 0; ++ pDM_SWAT_Table->try_flag = 0; ++ // DBG_8192C("dm_SW_AntennaSwitch(): Set try_flag to 0 prepare for peak!\n"); ++ return; ++ } ++ else ++ { ++ curTxOkCnt = Adapter->xmitpriv.tx_bytes - pdmpriv->lastTxOkCnt; ++ curRxOkCnt = Adapter->recvpriv.rx_bytes - pdmpriv->lastRxOkCnt; ++ ++ pdmpriv->lastTxOkCnt = Adapter->xmitpriv.tx_bytes ; ++ pdmpriv->lastRxOkCnt = Adapter->recvpriv.rx_bytes ; ++ ++ if(pDM_SWAT_Table->try_flag == 1) ++ { ++ if(pDM_SWAT_Table->CurAntenna == Antenna_A) ++ { ++ pdmpriv->TXByteCnt_A += curTxOkCnt; ++ pdmpriv->RXByteCnt_A += curRxOkCnt; ++ //DBG_8192C("##### TXByteCnt_A(%lld) , RXByteCnt_A(%lld) ####\n",pdmpriv->TXByteCnt_A,pdmpriv->RXByteCnt_A); ++ } ++ else ++ { ++ pdmpriv->TXByteCnt_B += curTxOkCnt; ++ pdmpriv->RXByteCnt_B += curRxOkCnt; ++ //DBG_8192C("##### TXByteCnt_B(%lld) , RXByteCnt_B(%lld) ####\n",pdmpriv->TXByteCnt_B,pdmpriv->RXByteCnt_B); ++ } ++ ++ nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A; ++ pDM_SWAT_Table->RSSI_Trying--; ++ //DBG_8192C("RSSI_Trying = %d\n",pDM_SWAT_Table->RSSI_Trying); ++ ++ if(pDM_SWAT_Table->RSSI_Trying == 0) ++ { ++ CurByteCnt = (pDM_SWAT_Table->CurAntenna == Antenna_A)? (pdmpriv->TXByteCnt_A+pdmpriv->RXByteCnt_A) : (pdmpriv->TXByteCnt_B+pdmpriv->RXByteCnt_B); ++ PreByteCnt = (pDM_SWAT_Table->CurAntenna == Antenna_A)? (pdmpriv->TXByteCnt_B+pdmpriv->RXByteCnt_B) : (pdmpriv->TXByteCnt_A+pdmpriv->RXByteCnt_A); ++ ++ //DBG_8192C("CurByteCnt = %lld\n", CurByteCnt); ++ //DBG_8192C("PreByteCnt = %lld\n",PreByteCnt); ++ ++ if(pdmpriv->TrafficLoad == TRAFFIC_HIGH) ++ { ++ PreByteCnt = PreByteCnt*9; //normalize:Cur=90ms:Pre=10ms ++ } ++ else if(pdmpriv->TrafficLoad == TRAFFIC_LOW) ++ { ++ //CurByteCnt = CurByteCnt/2; ++ CurByteCnt = CurByteCnt>>1;//normalize:100ms:50ms ++ } ++ ++ ++ //DBG_8192C("After DIV=>CurByteCnt = %lld\n", CurByteCnt); ++ //DBG_8192C("PreByteCnt = %lld\n",PreByteCnt); ++ ++ if(pHalData->RSSI_cnt_A > 0) ++ RSSI_A = pHalData->RSSI_sum_A/pHalData->RSSI_cnt_A; ++ else ++ RSSI_A = 0; ++ if(pHalData->RSSI_cnt_B > 0) ++ RSSI_B = pHalData->RSSI_sum_B/pHalData->RSSI_cnt_B; ++ else ++ RSSI_B = 0; ++ ++ curRSSI = (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_A : RSSI_B; ++ pDM_SWAT_Table->PreRSSI = (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_B : RSSI_A; ++ //DBG_8192C("Luke:PreRSSI = %d, CurRSSI = %d\n",pDM_SWAT_Table->PreRSSI, curRSSI); ++ //DBG_8192C("SWAS: preAntenna= %s, curAntenna= %s \n", ++ //(pDM_SWAT_Table->PreAntenna == Antenna_A?"A":"B"), (pDM_SWAT_Table->CurAntenna == Antenna_A?"A":"B")); ++ //DBG_8192C("Luke:RSSI_A= %d, RSSI_cnt_A = %d, RSSI_B= %d, RSSI_cnt_B = %d\n", ++ //RSSI_A, pHalData->RSSI_cnt_A, RSSI_B, pHalData->RSSI_cnt_B); ++ } ++ ++ } ++ else ++ { ++ ++ if(pHalData->RSSI_cnt_A > 0) ++ RSSI_A = pHalData->RSSI_sum_A/pHalData->RSSI_cnt_A; ++ else ++ RSSI_A = 0; ++ if(pHalData->RSSI_cnt_B > 0) ++ RSSI_B = pHalData->RSSI_sum_B/pHalData->RSSI_cnt_B; ++ else ++ RSSI_B = 0; ++ curRSSI = (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_A : RSSI_B; ++ pDM_SWAT_Table->PreRSSI = (pDM_SWAT_Table->PreAntenna == Antenna_A)? RSSI_A : RSSI_B; ++ //DBG_8192C("Ekul:PreRSSI = %d, CurRSSI = %d\n", pDM_SWAT_Table->PreRSSI, curRSSI); ++ //DBG_8192C("SWAS: preAntenna= %s, curAntenna= %s \n", ++ //(pDM_SWAT_Table->PreAntenna == Antenna_A?"A":"B"), (pDM_SWAT_Table->CurAntenna == Antenna_A?"A":"B")); ++ ++ //DBG_8192C("Ekul:RSSI_A= %d, RSSI_cnt_A = %d, RSSI_B= %d, RSSI_cnt_B = %d\n", ++ // RSSI_A, pHalData->RSSI_cnt_A, RSSI_B, pHalData->RSSI_cnt_B); ++ //RT_TRACE(COMP_SWAS, DBG_LOUD, ("Ekul:curTxOkCnt = %d\n", curTxOkCnt)); ++ //RT_TRACE(COMP_SWAS, DBG_LOUD, ("Ekul:curRxOkCnt = %d\n", curRxOkCnt)); ++ } ++ ++ //1 Trying State ++ if((pDM_SWAT_Table->try_flag == 1)&&(pDM_SWAT_Table->RSSI_Trying == 0)) ++ { ++ ++ if(pDM_SWAT_Table->TestMode == TP_MODE) ++ { ++ //DBG_8192C("SWAS: TestMode = TP_MODE\n"); ++ //DBG_8192C("TRY:CurByteCnt = %lld\n", CurByteCnt); ++ //DBG_8192C("TRY:PreByteCnt = %lld\n",PreByteCnt); ++ if(CurByteCnt < PreByteCnt) ++ { ++ if(pDM_SWAT_Table->CurAntenna == Antenna_A) ++ pDM_SWAT_Table->SelectAntennaMap=pDM_SWAT_Table->SelectAntennaMap<<1; ++ else ++ pDM_SWAT_Table->SelectAntennaMap=(pDM_SWAT_Table->SelectAntennaMap<<1)+1; ++ } ++ else ++ { ++ if(pDM_SWAT_Table->CurAntenna == Antenna_A) ++ pDM_SWAT_Table->SelectAntennaMap=(pDM_SWAT_Table->SelectAntennaMap<<1)+1; ++ else ++ pDM_SWAT_Table->SelectAntennaMap=pDM_SWAT_Table->SelectAntennaMap<<1; ++ } ++ for (i= 0; i<8; i++) ++ { ++ if(((pDM_SWAT_Table->SelectAntennaMap>>i)&BIT0) == 1) ++ Score_A++; ++ else ++ Score_B++; ++ } ++ //DBG_8192C("SelectAntennaMap=%x\n ",pDM_SWAT_Table->SelectAntennaMap); ++ //DBG_8192C("Score_A=%d, Score_B=%d\n", Score_A, Score_B); ++ ++ if(pDM_SWAT_Table->CurAntenna == Antenna_A) ++ { ++ nextAntenna = (Score_A > Score_B)?Antenna_A:Antenna_B; ++ } ++ else ++ { ++ nextAntenna = (Score_B > Score_A)?Antenna_B:Antenna_A; ++ } ++ //RT_TRACE(COMP_SWAS, DBG_LOUD, ("nextAntenna=%s\n",(nextAntenna==Antenna_A)?"A":"B")); ++ //RT_TRACE(COMP_SWAS, DBG_LOUD, ("preAntenna= %s, curAntenna= %s \n", ++ //(DM_SWAT_Table.PreAntenna == Antenna_A?"A":"B"), (DM_SWAT_Table.CurAntenna == Antenna_A?"A":"B"))); ++ ++ if(nextAntenna != pDM_SWAT_Table->CurAntenna) ++ { ++ //DBG_8192C("SWAS: Switch back to another antenna\n"); ++ } ++ else ++ { ++ //DBG_8192C("SWAS: current anntena is good\n"); ++ } ++ } ++ ++ if(pDM_SWAT_Table->TestMode == RSSI_MODE) ++ { ++ //DBG_8192C("SWAS: TestMode = RSSI_MODE\n"); ++ pDM_SWAT_Table->SelectAntennaMap=0xAA; ++ if(curRSSI < pDM_SWAT_Table->PreRSSI) //Current antenna is worse than previous antenna ++ { ++ //DBG_8192C("SWAS: Switch back to another antenna\n"); ++ nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A; ++ } ++ else // current anntena is good ++ { ++ nextAntenna = pDM_SWAT_Table->CurAntenna; ++ //DBG_8192C("SWAS: current anntena is good\n"); ++ } ++ } ++ pDM_SWAT_Table->try_flag = 0; ++ pHalData->RSSI_test = _FALSE; ++ pHalData->RSSI_sum_A = 0; ++ pHalData->RSSI_cnt_A = 0; ++ pHalData->RSSI_sum_B = 0; ++ pHalData->RSSI_cnt_B = 0; ++ pdmpriv->TXByteCnt_A = 0; ++ pdmpriv->TXByteCnt_B = 0; ++ pdmpriv->RXByteCnt_A = 0; ++ pdmpriv->RXByteCnt_B = 0; ++ ++ } ++ ++ //1 Normal State ++ else if(pDM_SWAT_Table->try_flag == 0) ++ { ++ if(pdmpriv->TrafficLoad == TRAFFIC_HIGH) ++ { ++ if(((curTxOkCnt+curRxOkCnt)>>1) > 1875000) ++ pdmpriv->TrafficLoad = TRAFFIC_HIGH; ++ else ++ pdmpriv->TrafficLoad = TRAFFIC_LOW; ++ } ++ else if(pdmpriv->TrafficLoad == TRAFFIC_LOW) ++ { ++ if(((curTxOkCnt+curRxOkCnt)>>1) > 1875000) ++ pdmpriv->TrafficLoad = TRAFFIC_HIGH; ++ else ++ pdmpriv->TrafficLoad = TRAFFIC_LOW; ++ } ++ if(pdmpriv->TrafficLoad == TRAFFIC_HIGH) ++ pDM_SWAT_Table->bTriggerAntennaSwitch = 0; ++ //DBG_8192C("Normal:TrafficLoad = %lld\n", curTxOkCnt+curRxOkCnt); ++ ++ //Prepare To Try Antenna ++ nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A; ++ pDM_SWAT_Table->try_flag = 1; ++ pHalData->RSSI_test = _TRUE; ++ if((curRxOkCnt+curTxOkCnt) > 1000) ++ { ++ pDM_SWAT_Table->RSSI_Trying = 4; ++ pDM_SWAT_Table->TestMode = TP_MODE; ++ } ++ else ++ { ++ pDM_SWAT_Table->RSSI_Trying = 2; ++ pDM_SWAT_Table->TestMode = RSSI_MODE; ++ ++ } ++ //DBG_8192C("SWAS: Normal State -> Begin Trying! TestMode=%s\n",(pDM_SWAT_Table->TestMode == TP_MODE)?"TP":"RSSI"); ++ ++ ++ pHalData->RSSI_sum_A = 0; ++ pHalData->RSSI_cnt_A = 0; ++ pHalData->RSSI_sum_B = 0; ++ pHalData->RSSI_cnt_B = 0; ++ } ++ } ++ ++ //1 4.Change TRX antenna ++ if(nextAntenna != pDM_SWAT_Table->CurAntenna) ++ { ++ //DBG_8192C("@@@@@@@@ SWAS: Change TX Antenna!\n "); ++ rtw_antenna_select_cmd(Adapter, nextAntenna, 1); ++ } ++ ++ //1 5.Reset Statistics ++ pDM_SWAT_Table->PreAntenna = pDM_SWAT_Table->CurAntenna; ++ pDM_SWAT_Table->CurAntenna = nextAntenna; ++ pDM_SWAT_Table->PreRSSI = curRSSI; ++ ++ ++ //1 6.Set next timer ++ ++ if(pDM_SWAT_Table->RSSI_Trying == 0) ++ return; ++ ++ if(pDM_SWAT_Table->RSSI_Trying%2 == 0) ++ { ++ if(pDM_SWAT_Table->TestMode == TP_MODE) ++ { ++ if(pdmpriv->TrafficLoad == TRAFFIC_HIGH) ++ { ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer,10 ); //ms ++ //DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 10 ms\n"); ++ } ++ else if(pdmpriv->TrafficLoad == TRAFFIC_LOW) ++ { ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer, 50 ); //ms ++ //DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 50 ms\n"); ++ } ++ } ++ else ++ { ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer, 500 ); //ms ++ //DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 500 ms\n"); ++ } ++ } ++ else ++ { ++ if(pDM_SWAT_Table->TestMode == TP_MODE) ++ { ++ if(pdmpriv->TrafficLoad == TRAFFIC_HIGH) ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer,90 ); //ms ++ else if(pdmpriv->TrafficLoad == TRAFFIC_LOW) ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer,100 ); //ms ++ } ++ else ++ { ++ _set_timer(&pdmpriv->SwAntennaSwitchTimer,500 ); //ms ++ //DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 500 ms\n"); ++ } ++ } ++ ++// RT_TRACE(COMP_SWAS, DBG_LOUD, ("SWAS: -----The End-----\n ")); ++ ++} ++ ++// ++// 20100514 Luke/Joseph: ++// Callback function for 500ms antenna test trying. ++// ++static void dm_SW_AntennaSwitchCallback(void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ ++ if(padapter->net_closed == _TRUE) ++ return; ++ // Only ++ dm_SW_AntennaSwitch(padapter, SWAW_STEP_DETERMINE); ++} ++ ++ ++// ++// 20100722 ++// This function is used to gather the RSSI information for antenna testing. ++// It selects the RSSI of the peer STA that we want to know. ++// ++void SwAntDivRSSICheck8192C(_adapter *padapter ,u32 RxPWDBAll) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ ++ if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0) ++ return; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ if(pDM_SWAT_Table->CurAntenna == Antenna_A) ++ { ++ pHalData->RSSI_sum_A += RxPWDBAll; ++ pHalData->RSSI_cnt_A++; ++ } ++ else ++ { ++ pHalData->RSSI_sum_B+= RxPWDBAll; ++ pHalData->RSSI_cnt_B++; ++ ++ } ++ //DBG_8192C("%s Ant_(%s),RSSI_sum(%d),RSSI_cnt(%d)\n",__FUNCTION__,(2==pHalData->CurAntenna)?"A":"B",pHalData->RSSI_sum,pHalData->RSSI_cnt); ++ } ++ ++} ++ ++ ++ ++static VOID ++dm_SW_AntennaSwitchInit( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table; ++ ++ pHalData->RSSI_sum_A = 0; ++ pHalData->RSSI_sum_B = 0; ++ pHalData->RSSI_cnt_A = 0; ++ pHalData->RSSI_cnt_B = 0; ++ ++ pDM_SWAT_Table->CurAntenna = pHalData->CurAntenna; ++ pDM_SWAT_Table->PreAntenna = pHalData->CurAntenna; ++ pDM_SWAT_Table->try_flag = 0xff; ++ pDM_SWAT_Table->PreRSSI = 0; ++ pDM_SWAT_Table->bTriggerAntennaSwitch = 0; ++ pDM_SWAT_Table->SelectAntennaMap=0xAA; ++ ++ // Move the timer initialization to InitializeVariables function. ++ //PlatformInitializeTimer(Adapter, &pMgntInfo->SwAntennaSwitchTimer, (RT_TIMER_CALL_BACK)dm_SW_AntennaSwitchCallback, NULL, "SwAntennaSwitchTimer"); ++} ++ ++#endif ++ ++//#define RSSI_CCK 0 ++//#define RSSI_OFDM 1 ++static void dm_RSSIMonitorInit( ++ IN PADAPTER Adapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ pdmpriv->OFDM_Pkt_Cnt = 0; ++ pdmpriv->RSSI_Select = RSSI_DEFAULT; ++} ++ ++static void dm_RSSIMonitorCheck( ++ IN PADAPTER Adapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ++ return; ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE |WIFI_ADHOC_STATE) == _TRUE ) ++ { ++ if(Adapter->stapriv.asoc_sta_count < 2) ++ return; ++ } ++ ++ if(pdmpriv->OFDM_Pkt_Cnt == 0) ++ pdmpriv->RSSI_Select = RSSI_CCK; ++ else ++ pdmpriv->RSSI_Select = RSSI_OFDM; ++ ++ pdmpriv->OFDM_Pkt_Cnt = 0; ++ //DBG_8192C("RSSI_Select=%s OFDM_Pkt_Cnt(%d)\n", ++ //(pdmpriv->RSSI_Select == RSSI_OFDM)?"RSSI_OFDM":"RSSI_CCK", ++ //pdmpriv->OFDM_Pkt_Cnt); ++} ++ ++//============================================================ ++// functions ++//============================================================ ++void rtl8192c_init_dm_priv(IN PADAPTER Adapter) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ //_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv)); ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ _init_timer(&(pdmpriv->SwAntennaSwitchTimer), Adapter->pnetdev , dm_SW_AntennaSwitchCallback, Adapter); ++#endif ++} ++ ++void rtl8192c_deinit_dm_priv(IN PADAPTER Adapter) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ _cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer); ++#endif ++} ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++void dm_InitHybridAntDiv(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0) ++ return; ++ ++ //Set OFDM HW RX Antenna Diversity ++ PHY_SetBBReg(Adapter,0xc50, BIT7, 1); //Enable Hardware antenna switch ++ PHY_SetBBReg(Adapter,0x870, BIT9|BIT8, 0); //Enable hardware control of "ANT_SEL" & "ANT_SELB" ++ PHY_SetBBReg(Adapter,0xCA4, BIT11, 0); //Switch to another antenna by checking pwdb threshold ++ PHY_SetBBReg(Adapter,0xCA4, 0x7FF, 0x080); //Pwdb threshold=8dB ++ PHY_SetBBReg(Adapter,0xC54, BIT23, 1); //Decide final antenna by comparing 2 antennas' pwdb ++ PHY_SetBBReg(Adapter,0x874, BIT23, 0); //No update ANTSEL during GNT_BT=1 ++ PHY_SetBBReg(Adapter,0x80C, BIT21, 1); //TX atenna selection from tx_info ++ //Set CCK HW RX Antenna Diversity ++ PHY_SetBBReg(Adapter,0xA00, BIT15, 1);//Enable antenna diversity ++ PHY_SetBBReg(Adapter,0xA0C, BIT4, 0); //Antenna diversity decision period = 32 sample ++ PHY_SetBBReg(Adapter,0xA0C, 0xf, 0xf); //Threshold for antenna diversity. Check another antenna power if input power < ANT_lim*4 ++ PHY_SetBBReg(Adapter,0xA10, BIT13, 1); //polarity ana_A=1 and ana_B=0 ++ PHY_SetBBReg(Adapter,0xA14, 0x1f, 0x8); //default antenna power = inpwr*(0.5 + r_ant_step/16) ++ ++ pHalData->CCK_Ant1_Cnt = 0; ++ pHalData->CCK_Ant2_Cnt = 0; ++ pHalData->OFDM_Ant1_Cnt = 0; ++ pHalData->OFDM_Ant2_Cnt = 0; ++} ++ ++ ++#define RxDefaultAnt1 0x65a9 ++#define RxDefaultAnt2 0x569a ++ ++void dm_SelectRXDefault(IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0) ++ return; ++ ++ //DbgPrint(" Ant1_Cnt=%d, Ant2_Cnt=%d\n", pHalData->Ant1_Cnt, pHalData->Ant2_Cnt); ++ //DBG_8192C(" CCK_Ant1_Cnt = %d, CCK_Ant2_Cnt = %d\n", pHalData->CCK_Ant1_Cnt, pHalData->CCK_Ant2_Cnt); ++ //DBG_8192C(" OFDM_Ant1_Cnt = %d, OFDM_Ant2_Cnt = %d\n", pHalData->OFDM_Ant1_Cnt, pHalData->OFDM_Ant2_Cnt); ++ if((pHalData->OFDM_Ant1_Cnt == 0) && (pHalData->OFDM_Ant2_Cnt == 0)) ++ { ++ if((pHalData->CCK_Ant1_Cnt + pHalData->CCK_Ant2_Cnt) >=10 ) ++ { ++ if(pHalData->CCK_Ant1_Cnt > (5*pHalData->CCK_Ant2_Cnt)) ++ { ++ DBG_8192C(" RX Default = Ant1\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1); ++ } ++ else if(pHalData->CCK_Ant2_Cnt > (5*pHalData->CCK_Ant1_Cnt)) ++ { ++ DBG_8192C(" RX Default = Ant2\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2); ++ } ++ else if(pHalData->CCK_Ant1_Cnt > pHalData->CCK_Ant2_Cnt) ++ { ++ DBG_8192C(" RX Default = Ant2\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2); ++ } ++ else ++ { ++ DBG_8192C(" RX Default = Ant1\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1); ++ } ++ pHalData->CCK_Ant1_Cnt = 0; ++ pHalData->CCK_Ant2_Cnt = 0; ++ pHalData->OFDM_Ant1_Cnt = 0; ++ pHalData->OFDM_Ant2_Cnt = 0; ++ } ++ } ++ else ++ { ++ if(pHalData->OFDM_Ant1_Cnt > pHalData->OFDM_Ant2_Cnt) ++ { ++ DBG_8192C(" RX Default = Ant1\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1); ++ } ++ else ++ { ++ DBG_8192C(" RX Default = Ant2\n"); ++ PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2); ++ } ++ pHalData->CCK_Ant1_Cnt = 0; ++ pHalData->CCK_Ant2_Cnt = 0; ++ pHalData->OFDM_Ant1_Cnt = 0; ++ pHalData->OFDM_Ant2_Cnt = 0; ++ } ++ ++ ++} ++ ++#endif ++ ++void ++rtl8192c_InitHalDm( ++ IN PADAPTER Adapter ++ ) ++{ ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 i; ++ ++#ifdef CONFIG_USB_HCI ++ dm_InitGPIOSetting(Adapter); ++#endif ++ ++ pdmpriv->DM_Type = DM_Type_ByDriver; ++ pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE; ++ pdmpriv->UndecoratedSmoothedPWDB = (-1); ++ pdmpriv->UndecoratedSmoothedCCK = (-1); ++ ++ ++ //.1 DIG INIT ++ pdmpriv->bDMInitialGainEnable = _TRUE; ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_DIG; ++ dm_DIGInit(Adapter); ++ ++ //.2 DynamicTxPower INIT ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_HP; ++ dm_InitDynamicTxPower(Adapter); ++ ++ //.3 ++ DM_InitEdcaTurbo(Adapter); ++ ++ //.4 RateAdaptive INIT ++ dm_InitRateAdaptiveMask(Adapter); ++ ++ //.5 Tx Power Tracking Init. ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_SS; ++ DM_InitializeTXPowerTracking(Adapter); ++ ++#ifdef CONFIG_BT_COEXIST ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_BT; ++ dm_InitBtCoexistDM(Adapter); ++#endif ++ ++ dm_InitDynamicBBPowerSaving(Adapter); ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_ANT_DIV; ++ dm_SW_AntennaSwitchInit(Adapter); ++#endif ++ ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_ANT_DIV; ++ dm_InitHybridAntDiv(Adapter); ++#endif ++ ++ dm_RSSIMonitorInit(Adapter); ++ ++ pdmpriv->DMFlag_tmp = pdmpriv->DMFlag; ++ ++ // Save REG_INIDATA_RATE_SEL value for TXDESC. ++ for(i = 0 ; i<32 ; i++) ++ { ++ pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f; ++ } ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ pdmpriv->DMFlag |= DYNAMIC_FUNC_ADAPTIVITY; ++ dm_adaptivity_init(Adapter); ++#endif ++ ++} ++ ++#ifdef CONFIG_CONCURRENT_MODE ++static void FindMinimumRSSI(PADAPTER Adapter) ++{ ++ PHAL_DATA_TYPE pbuddy_HalData; ++ struct dm_priv *pbuddy_dmpriv; ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ ++ if(!rtw_buddy_adapter_up(Adapter)) ++ return; ++ ++ pbuddy_HalData = GET_HAL_DATA(pbuddy_adapter); ++ pbuddy_dmpriv = &pbuddy_HalData->dmpriv; ++ ++ //get min. [PWDB] when both interfaces are connected ++ if((check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE ++ && Adapter->stapriv.asoc_sta_count > 2 ++ && check_buddy_fwstate(Adapter, _FW_LINKED)) || ++ (check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE ++ && pbuddy_adapter->stapriv.asoc_sta_count > 2 ++ && check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_STATION_STATE) ++ && check_fwstate(pmlmepriv, _FW_LINKED) ++ && check_buddy_fwstate(Adapter,WIFI_STATION_STATE) ++ && check_buddy_fwstate(Adapter,_FW_LINKED))) ++ { ++ if(pdmpriv->UndecoratedSmoothedPWDB > pbuddy_dmpriv->UndecoratedSmoothedPWDB) ++ pdmpriv->UndecoratedSmoothedPWDB = pbuddy_dmpriv->UndecoratedSmoothedPWDB; ++ }//primary interface is not connected ++ else if((check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE ++ && pbuddy_adapter->stapriv.asoc_sta_count > 2) || ++ (check_buddy_fwstate(Adapter,WIFI_STATION_STATE) ++ && check_buddy_fwstate(Adapter,_FW_LINKED))) ++ { ++ pdmpriv->UndecoratedSmoothedPWDB = pbuddy_dmpriv->UndecoratedSmoothedPWDB; ++ } ++ //secondary is not connected ++ else if((check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE ++ && Adapter->stapriv.asoc_sta_count > 2) || ++ (check_fwstate(pmlmepriv, WIFI_STATION_STATE) ++ && check_fwstate(pmlmepriv, _FW_LINKED))) ++ { ++ pbuddy_dmpriv->UndecoratedSmoothedPWDB = 0; ++ } ++ //both interfaces are not connected ++ else ++ { ++ pdmpriv->UndecoratedSmoothedPWDB = 0; ++ pbuddy_dmpriv->UndecoratedSmoothedPWDB = 0; ++ } ++ ++ //primary interface is ap mode ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE && Adapter->stapriv.asoc_sta_count > 2) ++ { ++ pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB = 0; ++ }//secondary interface is ap mode ++ else if(check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE && pbuddy_adapter->stapriv.asoc_sta_count > 2) ++ { ++ pdmpriv->EntryMinUndecoratedSmoothedPWDB = pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB; ++ } ++ else //both interfaces are not ap mode ++ { ++ pdmpriv->EntryMinUndecoratedSmoothedPWDB = pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB = 0; ++ } ++ ++} ++ ++#endif //CONFIG_CONCURRENT_MODE ++ ++VOID ++rtl8192c_HalDmWatchDog( ++ IN PADAPTER Adapter ++ ) ++{ ++ BOOLEAN bFwCurrentInPSMode = _FALSE; ++ BOOLEAN bFwPSAwake = _TRUE; ++ u8 hw_init_completed = _FALSE; ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; ++#endif //CONFIG_CONCURRENT_MODE ++ ++ #if defined(CONFIG_CONCURRENT_MODE) ++ if (Adapter->isprimary == _FALSE && pbuddy_adapter) { ++ hw_init_completed = pbuddy_adapter->hw_init_completed; ++ } else ++ #endif ++ { ++ hw_init_completed = Adapter->hw_init_completed; ++ } ++ ++ if (hw_init_completed == _FALSE) ++ goto skip_dm; ++ ++#ifdef CONFIG_LPS ++ #if defined(CONFIG_CONCURRENT_MODE) ++ if (Adapter->iface_type != IFACE_PORT0 && pbuddy_adapter) { ++ bFwCurrentInPSMode = pbuddy_adapter->pwrctrlpriv.bFwCurrentInPSMode; ++ rtw_hal_get_hwreg(pbuddy_adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake)); ++ } else ++ #endif ++ { ++ bFwCurrentInPSMode = Adapter->pwrctrlpriv.bFwCurrentInPSMode; ++ rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake)); ++ } ++#endif ++ ++#ifdef CONFIG_P2P_PS ++ // Fw is under p2p powersaving mode, driver should stop dynamic mechanism. ++ // modifed by thomas. 2011.06.11. ++ if(Adapter->wdinfo.p2p_ps_mode) ++ bFwPSAwake = _FALSE; ++#endif // CONFIG_P2P_PS ++ ++ // Stop dynamic mechanism when: ++ // 1. RF is OFF. (No need to do DM.) ++ // 2. Fw is under power saving mode for FwLPS. (Prevent from SW/FW I/O racing.) ++ // 3. IPS workitem is scheduled. (Prevent from IPS sequence to be swapped with DM. ++ // Sometimes DM execution time is longer than 100ms such that the assertion ++ // in MgntActSet_RF_State() called by InactivePsWorkItem will be triggered by ++ // wating to long for RFChangeInProgress.) ++ // 4. RFChangeInProgress is TRUE. (Prevent from broken by IPS/HW/SW Rf off.) ++ // Noted by tynli. 2010.06.01. ++ //if(rfState == eRfOn) ++ if( (hw_init_completed == _TRUE) ++ && ((!bFwCurrentInPSMode) && bFwPSAwake)) ++ { ++ // ++ // Calculate Tx/Rx statistics. ++ // ++ dm_CheckStatistics(Adapter); ++ ++ // ++ // For PWDB monitor and record some value for later use. ++ // ++ PWDB_Monitor(Adapter); ++ ++ dm_RSSIMonitorCheck(Adapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->adapter_type > PRIMARY_ADAPTER) ++ goto _record_initrate; ++ ++ FindMinimumRSSI(Adapter); ++#endif ++ ++ // ++ // Dynamic Initial Gain mechanism. ++ // ++ dm_FalseAlarmCounterStatistics(Adapter); ++ dm_DIG(Adapter); ++ dm_adaptivity(Adapter); ++ ++ // ++ //Dynamic BB Power Saving Mechanism ++ // ++ dm_DynamicBBPowerSaving(Adapter); ++ ++ // ++ // Dynamic Tx Power mechanism. ++ // ++ dm_DynamicTxPower(Adapter); ++ ++ // ++ // Tx Power Tracking. ++ // ++#if MP_DRIVER == 0 ++#ifdef CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK ++ if(pmlmepriv->LinkDetectInfo.bBusyTraffic == _FALSE) ++#endif //CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK ++#endif ++ rtl8192c_dm_CheckTXPowerTracking(Adapter); ++ ++ // ++ // Rate Adaptive by Rx Signal Strength mechanism. ++ // ++ dm_RefreshRateAdaptiveMask(Adapter); ++ ++#ifdef CONFIG_BT_COEXIST ++ //BT-Coexist ++ dm_BTCoexist(Adapter); ++#endif ++ ++ // EDCA turbo ++ //update the EDCA paramter according to the Tx/RX mode ++ //update_EDCA_param(Adapter); ++ dm_CheckEdcaTurbo(Adapter); ++ ++ // ++ // Dynamically switch RTS/CTS protection. ++ // ++ //dm_CheckProtection(Adapter); ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ // ++ // Software Antenna diversity ++ // ++ dm_SW_AntennaSwitch(Adapter, SWAW_STEP_PEAK); ++#endif ++ ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ //Hybrid Antenna Diversity ++ dm_SelectRXDefault(Adapter); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ // 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput. ++ // Tx Migration settings. ++ //dm_InterruptMigration(Adapter); ++ ++ //if(Adapter->HalFunc.TxCheckStuckHandler(Adapter)) ++ // PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem)); ++#endif ++ ++ ++_record_initrate: ++ ++ // Read REG_INIDATA_RATE_SEL value for TXDESC. ++ if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ pdmpriv->INIDATA_RATE[0] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL) & 0x3f; ++ ++#ifdef CONFIG_TDLS ++ if(Adapter->tdlsinfo.setup_state == TDLS_LINKED_STATE) ++ { ++ u8 i=1; ++ for(; i < (Adapter->tdlsinfo.macid_index) ; i++) ++ { ++ pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f; ++ } ++ } ++#endif //CONFIG_TDLS ++ ++ } ++ else ++ { ++ u8 i; ++ for(i=1 ; i < (Adapter->stapriv.asoc_sta_count + 1); i++) ++ { ++ pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f; ++ } ++ } ++ } ++ ++skip_dm: ++ ++ // Check GPIO to determine current RF on/off and Pbc status. ++ // Check Hardware Radio ON/OFF or not ++ //if(Adapter->MgntInfo.PowerSaveControl.bGpioRfSw) ++ //{ ++ //RTPRINT(FPWR, PWRHW, ("dm_CheckRfCtrlGPIO \n")); ++ // dm_CheckRfCtrlGPIO(Adapter); ++ //} ++ ++#ifdef CONFIG_PCI_HCI ++ if(pHalData->bGpioHwWpsPbc) ++#endif ++ { ++ dm_CheckPbcGPIO(Adapter); // Add by hpfan 2008-03-11 ++ } ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c +new file mode 100644 +index 000000000000..bf5518f6e294 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c +@@ -0,0 +1,3627 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#define _RTL8192C_HAL_INIT_C_ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++#include ++#endif ++ ++static BOOLEAN ++hal_EfusePgPacketWrite2ByteHeader( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest); ++static BOOLEAN ++hal_EfusePgPacketWrite1ByteHeader( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest); ++static BOOLEAN ++hal_EfusePgPacketWriteData( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest); ++static BOOLEAN ++hal_EfusePgPacketWrite_BT( ++ IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *pData, ++ IN BOOLEAN bPseudoTest); ++ ++static VOID ++_FWDownloadEnable( ++ IN PADAPTER Adapter, ++ IN BOOLEAN enable ++ ) ++{ ++ u8 tmp; ++ ++ if(enable) ++ { ++ #ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE ++ { ++ u8 val; ++ if( (val=rtw_read8(Adapter, REG_MCUFWDL))) ++ DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val); ++ } ++ #endif ++ ++ // 8051 enable ++ tmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp|0x04); ++ ++ // MCU firmware download enable. ++ tmp = rtw_read8(Adapter, REG_MCUFWDL); ++ rtw_write8(Adapter, REG_MCUFWDL, tmp|0x01); ++ ++ // 8051 reset ++ tmp = rtw_read8(Adapter, REG_MCUFWDL+2); ++ rtw_write8(Adapter, REG_MCUFWDL+2, tmp&0xf7); ++ } ++ else ++ { ++ // MCU firmware download enable. ++ tmp = rtw_read8(Adapter, REG_MCUFWDL); ++ rtw_write8(Adapter, REG_MCUFWDL, tmp&0xfe); ++ ++ // Reserved for fw extension. ++ rtw_write8(Adapter, REG_MCUFWDL+1, 0x00); ++ } ++} ++ ++ ++#define MAX_REG_BOLCK_SIZE 196 ++#define MIN_REG_BOLCK_SIZE 8 ++ ++static int ++_BlockWrite( ++ IN PADAPTER Adapter, ++ IN PVOID buffer, ++ IN u32 size ++ ) ++{ ++ int ret = _SUCCESS; ++ ++#ifdef CONFIG_PCI_HCI ++ u32 blockSize = sizeof(u32); // Use 4-byte write to download FW ++ u8 *bufferPtr = (u8 *)buffer; ++ u32 *pu4BytePtr = (u32 *)buffer; ++ u32 i, offset, blockCount, remainSize; ++ u8 remainFW[4] = {0, 0, 0, 0}; ++ u8 *p = NULL; ++ ++ blockCount = size / blockSize; ++ remainSize = size % blockSize; ++ ++ for(i = 0 ; i < blockCount ; i++){ ++ offset = i * blockSize; ++ rtw_write32(Adapter, (FW_8192C_START_ADDRESS + offset), cpu_to_le32(*(pu4BytePtr + i))); ++ } ++ ++ p = (u8*)((u32*)(bufferPtr + blockCount * blockSize)); ++ if(remainSize){ ++ switch (remainSize) { ++ case 0: ++ break; ++ case 3: ++ remainFW[2]=*(p+2); ++ case 2: ++ remainFW[1]=*(p+1); ++ case 1: ++ remainFW[0]=*(p); ++ ret = rtw_write32(Adapter, (FW_8192C_START_ADDRESS + blockCount * blockSize), ++ le32_to_cpu(*(u32*)remainFW)); ++ } ++ return ret; ++ } ++#else ++ ++#ifdef SUPPORTED_BLOCK_IO ++ u32 blockSize = MAX_REG_BOLCK_SIZE; // Use 196-byte write to download FW ++ u32 blockSize2 = MIN_REG_BOLCK_SIZE; ++#else ++ u32 blockSize = sizeof(u32); // Use 4-byte write to download FW ++ u32* pu4BytePtr = (u32*)buffer; ++ u32 blockSize2 = sizeof(u8); ++#endif ++ u8* bufferPtr = (u8*)buffer; ++ u32 i, offset = 0, offset2, blockCount, remainSize, remainSize2; ++ ++ blockCount = size / blockSize; ++ remainSize = size % blockSize; ++ ++ for(i = 0 ; i < blockCount ; i++){ ++ offset = i * blockSize; ++ #ifdef SUPPORTED_BLOCK_IO ++ ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), blockSize, (bufferPtr + offset)); ++ #else ++ ret = rtw_write32(Adapter, (FW_8192C_START_ADDRESS + offset), le32_to_cpu(*(pu4BytePtr + i))); ++ #endif ++ ++ if(ret == _FAIL) ++ goto exit; ++ } ++ ++ if(remainSize){ ++ #if defined(SUPPORTED_BLOCK_IO) && defined(DBG_BLOCK_WRITE_ISSUE) //Can this be enabled? ++ offset = blockCount * blockSize; ++ ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), remainSize, (bufferPtr + offset)); ++ goto exit; ++ #endif ++ offset2 = blockCount * blockSize; ++ blockCount = remainSize / blockSize2; ++ remainSize2 = remainSize % blockSize2; ++ ++ for(i = 0 ; i < blockCount ; i++){ ++ offset = offset2 + i * blockSize2; ++ #ifdef SUPPORTED_BLOCK_IO ++ ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), blockSize2, (bufferPtr + offset)); ++ #else ++ ret = rtw_write8(Adapter, (FW_8192C_START_ADDRESS + offset ), *(bufferPtr + offset)); ++ #endif ++ ++ if(ret == _FAIL) ++ goto exit; ++ } ++ ++ if(remainSize2) ++ { ++ offset += blockSize2; ++ bufferPtr += offset; ++ ++ for(i = 0 ; i < remainSize2 ; i++){ ++ ret = rtw_write8(Adapter, (FW_8192C_START_ADDRESS + offset + i), *(bufferPtr + i)); ++ ++ if(ret == _FAIL) ++ goto exit; ++ } ++ } ++ } ++#endif ++ ++exit: ++ return ret; ++} ++ ++static int ++_PageWrite( ++ IN PADAPTER Adapter, ++ IN u32 page, ++ IN PVOID buffer, ++ IN u32 size ++ ) ++{ ++ u8 value8; ++ u8 u8Page = (u8) (page & 0x07) ; ++ ++ value8 = (rtw_read8(Adapter, REG_MCUFWDL+2)& 0xF8 ) | u8Page ; ++ rtw_write8(Adapter, REG_MCUFWDL+2,value8); ++ return _BlockWrite(Adapter,buffer,size); ++} ++ ++static VOID ++_FillDummy( ++ u8* pFwBuf, ++ u32* pFwLen ++ ) ++{ ++ u32 FwLen = *pFwLen; ++ u8 remain = (u8)(FwLen%4); ++ remain = (remain==0)?0:(4-remain); ++ ++ while(remain>0) ++ { ++ pFwBuf[FwLen] = 0; ++ FwLen++; ++ remain--; ++ } ++ ++ *pFwLen = FwLen; ++} ++ ++static int ++_WriteFW( ++ IN PADAPTER Adapter, ++ IN PVOID buffer, ++ IN u32 size ++ ) ++{ ++ // Since we need dynamic decide method of dwonload fw, so we call this function to get chip version. ++ // We can remove _ReadChipVersion from ReadAdapterInfo8192C later. ++ ++ int ret = _SUCCESS; ++ u32 pageNums,remainSize ; ++ u32 page,offset; ++ u8* bufferPtr = (u8*)buffer; ++ ++#ifdef CONFIG_PCI_HCI ++ // 20100120 Joseph: Add for 88CE normal chip. ++ // Fill in zero to make firmware image to dword alignment. ++// _FillDummy(bufferPtr, &size); ++#endif ++ ++ pageNums = size / MAX_PAGE_SIZE ; ++ //RT_ASSERT((pageNums <= 4), ("Page numbers should not greater then 4 \n")); ++ remainSize = size % MAX_PAGE_SIZE; ++ ++ for(page = 0; page < pageNums; page++){ ++ offset = page *MAX_PAGE_SIZE; ++ ret = _PageWrite(Adapter,page, (bufferPtr+offset),MAX_PAGE_SIZE); ++ ++ if(ret == _FAIL) ++ goto exit; ++ } ++ if(remainSize){ ++ offset = pageNums *MAX_PAGE_SIZE; ++ page = pageNums; ++ ret = _PageWrite(Adapter,page, (bufferPtr+offset),remainSize); ++ ++ if(ret == _FAIL) ++ goto exit; ++ } ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("_WriteFW Done- for Normal chip.\n")); ++ ++exit: ++ return ret; ++} ++ ++static int _FWFreeToGo( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 counter = 0; ++ u32 value32; ++ u32 restarted = _FALSE; ++ ++ // polling CheckSum report ++ do{ ++ value32 = rtw_read32(Adapter, REG_MCUFWDL); ++ }while((counter ++ < POLLING_READY_TIMEOUT_COUNT) && (!(value32 & FWDL_ChkSum_rpt))); ++ ++ if(counter >= POLLING_READY_TIMEOUT_COUNT){ ++ DBG_8192C("chksum report faill ! REG_MCUFWDL:0x%08x\n",value32); ++ return _FAIL; ++ } else { ++ //DBG_8192C("chksum report success ! REG_MCUFWDL:0x%08x, counter:%u\n",value32, counter); ++ } ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Checksum report OK ! REG_MCUFWDL:0x%08x .\n",value32)); ++ ++ ++ value32 = rtw_read32(Adapter, REG_MCUFWDL); ++ value32 |= MCUFWDL_RDY; ++ value32 &= ~WINTINI_RDY; ++ rtw_write32(Adapter, REG_MCUFWDL, value32); ++ ++ ++POLLING_FW_READY: ++ // polling for FW ready ++ counter = 0; ++ do ++ { ++ if(rtw_read32(Adapter, REG_MCUFWDL) & WINTINI_RDY){ ++ //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",PlatformIORead4Byte(Adapter, REG_MCUFWDL)) ); ++ return _SUCCESS; ++ } ++ rtw_udelay_os(5); ++ }while(counter++ < POLLING_READY_TIMEOUT_COUNT); ++ ++ DBG_8192C("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", rtw_read32(Adapter, REG_MCUFWDL)); ++ ++ if(restarted == _FALSE) { ++ u8 tmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); ++ DBG_8192C("Reset 51 write8 REG_SYS_FUNC_EN:0x%04x\n", tmp & ~BIT2); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp & ~BIT2); ++ DBG_8192C("Reset 51 write8 REG_SYS_FUNC_EN:0x%04x\n", tmp|BIT2); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp|BIT2); ++ restarted = _TRUE; ++ goto POLLING_FW_READY; ++ } ++ ++ ++ return _FAIL; ++ ++} ++ ++ ++VOID ++rtl8192c_FirmwareSelfReset( ++ IN PADAPTER Adapter ++) ++{ ++ u8 u1bTmp; ++ u8 Delay = 100; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if((pHalData->FirmwareVersion > 0x21) || ++ (pHalData->FirmwareVersion == 0x21 && ++ pHalData->FirmwareSubVersion >= 0x01)) // after 88C Fw v33.1 ++ { ++ //0x1cf=0x20. Inform 8051 to reset. 2009.12.25. tynli_test ++ rtw_write8(Adapter, REG_HMETFR+3, 0x20); ++ ++ u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); ++ while(u1bTmp&BIT2) ++ { ++ Delay--; ++ if(Delay == 0) ++ break; ++ rtw_udelay_os(50); ++ u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); ++ } ++ ++ if((u1bTmp&BIT2) && (Delay == 0)) ++ { ++ DBG_8192C("FirmwareDownload92C():fw reset by itself Fail!!!!!! 0x03 = %x\n", u1bTmp); ++ //RT_ASSERT(FALSE, ("PowerOffAdapter8192CE(): 0x03 = %x\n", u1bTmp)); ++ #ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE ++ { ++ u8 val; ++ if( (val=rtw_read8(Adapter, REG_MCUFWDL))) ++ DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val); ++ } ++ #endif ++ rtw_write8(Adapter,REG_SYS_FUNC_EN+1,(rtw_read8(Adapter, REG_SYS_FUNC_EN+1)&~BIT2)); ++ } ++ ++ DBG_8192C("%s =====> 8051 reset success (%d) .\n", __FUNCTION__ ,Delay); ++ } ++} ++ ++#ifdef CONFIG_FILE_FWIMG ++extern char *rtw_fw_file_path; ++u8 FwBuffer8192C[FW_8192C_SIZE]; ++#endif //CONFIG_FILE_FWIMG ++// ++// Description: ++// Download 8192C firmware code. ++// ++// ++int FirmwareDownload92C( ++ IN PADAPTER Adapter, ++ IN BOOLEAN bUsedWoWLANFw ++) ++{ ++ int rtStatus = _SUCCESS; ++ u8 writeFW_retry = 0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ s8 R92CFwImageFileName_TSMC[] ={RTL8192C_FW_TSMC_IMG}; ++ s8 R92CFwImageFileName_UMC[] ={RTL8192C_FW_UMC_IMG}; ++ s8 R92CFwImageFileName_UMC_B[] ={RTL8192C_FW_UMC_B_IMG}; ++#ifdef CONFIG_WOWLAN ++ s8 R92CFwImageFileName_TSMC_WW[] ={RTL8192C_FW_TSMC_WW_IMG}; ++ s8 R92CFwImageFileName_UMC_WW[] ={RTL8192C_FW_UMC_WW_IMG}; ++ s8 R92CFwImageFileName_UMC_B_WW[] ={RTL8192C_FW_UMC_B_WW_IMG}; ++#endif //CONFIG_WOWLAN ++ ++ //s8 R8723FwImageFileName_UMC[] ={RTL8723_FW_UMC_IMG}; ++ u8* FwImage = NULL; ++ u32 FwImageLen = 0; ++ char* pFwImageFileName; ++#ifdef CONFIG_WOWLAN ++ u8* FwImageWoWLAN; ++ u32 FwImageWoWLANLen; ++ char* pFwImageFileName_WoWLAN; ++#endif //CONFIG_WOWLAN ++ u8* pucMappedFile = NULL; ++ //vivi, merge 92c and 92s into one driver, 20090817 ++ //vivi modify this temply, consider it later!!!!!!!! ++ //PRT_FIRMWARE pFirmware = GET_FIRMWARE_819X(Adapter); ++ //PRT_FIRMWARE_92C pFirmware = GET_FIRMWARE_8192C(Adapter); ++ PRT_FIRMWARE_92C pFirmware = NULL; ++ PRT_8192C_FIRMWARE_HDR pFwHdr = NULL; ++ u8 *pFirmwareBuf; ++ u32 FirmwareLen; ++ ++ pFirmware = (PRT_FIRMWARE_92C)rtw_zvmalloc(sizeof(RT_FIRMWARE_92C)); ++ ++ if(!pFirmware) ++ { ++ rtStatus = _FAIL; ++ goto Exit; ++ } ++ ++ if(IS_VENDOR_UMC_A_CUT(pHalData->VersionID) && !IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ pFwImageFileName = R92CFwImageFileName_UMC; ++ FwImage = Rtl819XFwUMCACutImageArray; ++ FwImageLen = UMCACutImgArrayLength; ++#ifdef CONFIG_WOWLAN ++ pFwImageFileName_WoWLAN = R92CFwImageFileName_UMC_WW; ++ FwImageWoWLAN= Rtl8192C_FwUMCWWImageArray; ++ FwImageWoWLANLen =UMCACutWWImgArrayLength ; ++#endif //CONFIG_WOWLAN ++ DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC\n"); ++ } ++ else if(IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)) ++ { ++ // The ROM code of UMC B-cut Fw is the same as TSMC. by tynli. 2011.01.14. ++ pFwImageFileName = R92CFwImageFileName_UMC_B; ++ FwImage = Rtl819XFwUMCBCutImageArray; ++ FwImageLen = UMCBCutImgArrayLength; ++#ifdef CONFIG_WOWLAN ++ pFwImageFileName_WoWLAN = R92CFwImageFileName_UMC_B_WW; ++ FwImageWoWLAN= Rtl8192C_FwUMCBCutWWImageArray; ++ FwImageWoWLANLen =UMCBCutWWImgArrayLength ; ++#endif //CONFIG_WOWLAN ++ ++ DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B\n"); ++ } ++ else ++ { ++ pFwImageFileName = R92CFwImageFileName_TSMC; ++ FwImage = Rtl819XFwTSMCImageArray; ++ FwImageLen = TSMCImgArrayLength; ++#ifdef CONFIG_WOWLAN ++ pFwImageFileName_WoWLAN = R92CFwImageFileName_TSMC_WW; ++ FwImageWoWLAN= Rtl8192C_FwTSMCWWImageArray; ++ FwImageWoWLANLen =TSMCWWImgArrayLength ; ++#endif //CONFIG_WOWLAN ++ DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC\n"); ++ } ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" ===> FirmwareDownload91C() fw:%s\n", pFwImageFileName)); ++ ++ #ifdef CONFIG_FILE_FWIMG ++ if(rtw_is_file_readable(rtw_fw_file_path) == _TRUE) ++ { ++ DBG_871X("%s accquire FW from file:%s\n", __FUNCTION__, rtw_fw_file_path); ++ pFirmware->eFWSource = FW_SOURCE_IMG_FILE; // We should decided by Reg. ++ } ++ else ++ #endif //CONFIG_FILE_FWIMG ++ { ++ DBG_871X("%s accquire FW from embedded image\n", __FUNCTION__); ++ pFirmware->eFWSource = FW_SOURCE_HEADER_FILE; ++ } ++ ++ ++ switch(pFirmware->eFWSource) ++ { ++ case FW_SOURCE_IMG_FILE: ++ ++ #ifdef CONFIG_FILE_FWIMG ++ rtStatus = rtw_retrive_from_file(rtw_fw_file_path, FwBuffer8192C, FW_8192C_SIZE); ++ pFirmware->ulFwLength = rtStatus>=0?rtStatus:0; ++ pFirmware->szFwBuffer = FwBuffer8192C; ++ #endif //CONFIG_FILE_FWIMG ++ ++ if(pFirmware->ulFwLength <= 0) ++ { ++ rtStatus = _FAIL; ++ goto Exit; ++ } ++ break; ++ case FW_SOURCE_HEADER_FILE: ++ if(FwImageLen > FW_8192C_SIZE){ ++ rtStatus = _FAIL; ++ //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Firmware size exceed 0x%X. Check it.\n", FW_8192C_SIZE) ); ++ DBG_871X("Firmware size exceed 0x%X. Check it.\n", FW_8192C_SIZE); ++ goto Exit; ++ } ++ ++ pFirmware->szFwBuffer = FwImage; ++ pFirmware->ulFwLength = FwImageLen; ++#ifdef CONFIG_WOWLAN ++ { ++ pFirmware->szWoWLANFwBuffer=FwImageWoWLAN; ++ pFirmware->ulWoWLANFwLength = FwImageWoWLANLen; ++ } ++#endif //CONFIG_WOWLAN ++ ++ break; ++ } ++ ++#ifdef CONFIG_WOWLAN ++ if(bUsedWoWLANFw) { ++ pFirmwareBuf = pFirmware->szWoWLANFwBuffer; ++ FirmwareLen = pFirmware->ulWoWLANFwLength; ++ pFwHdr = (PRT_8192C_FIRMWARE_HDR)pFirmware->szWoWLANFwBuffer; ++ } ++ else ++#endif //CONFIG_WOWLAN ++ { ++ #ifdef DBG_FW_STORE_FILE_PATH //used to store firmware to file... ++ if(pFirmware->ulFwLength > 0) ++ { ++ rtw_store_to_file(DBG_FW_STORE_FILE_PATH, pFirmware->szFwBuffer, pFirmware->ulFwLength); ++ } ++ #endif ++ ++ pFirmwareBuf = pFirmware->szFwBuffer; ++ FirmwareLen = pFirmware->ulFwLength; ++ ++ // To Check Fw header. Added by tynli. 2009.12.04. ++ pFwHdr = (PRT_8192C_FIRMWARE_HDR)pFirmware->szFwBuffer; ++ } ++ pHalData->FirmwareVersion = le16_to_cpu(pFwHdr->Version); ++ pHalData->FirmwareSubVersion = le16_to_cpu(pFwHdr->Subversion); ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" FirmwareVersion(%#x), Signature(%#x)\n", ++ // Adapter->MgntInfo.FirmwareVersion, pFwHdr->Signature)); ++ ++ DBG_8192C("fw_ver=v%d, fw_subver=%d, sig=0x%x\n", ++ pHalData->FirmwareVersion, pHalData->FirmwareSubVersion, le16_to_cpu(pFwHdr->Signature)&0xFFF0); ++ ++ if(IS_FW_HEADER_EXIST(pFwHdr)) ++ { ++ //RT_TRACE(COMP_INIT, DBG_LOUD,("Shift 32 bytes for FW header!!\n")); ++ pFirmwareBuf = pFirmwareBuf + 32; ++ FirmwareLen = FirmwareLen -32; ++ } ++ ++ // Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, ++ // or it will cause download Fw fail. 2010.02.01. by tynli. ++ if(rtw_read8(Adapter, REG_MCUFWDL)&BIT7) //8051 RAM code ++ { ++ rtl8192c_FirmwareSelfReset(Adapter); ++ rtw_write8(Adapter, REG_MCUFWDL, 0x00); ++ } ++ ++ ++ _FWDownloadEnable(Adapter, _TRUE); ++ while(1) { ++ u8 tmp8; ++ tmp8 = rtw_read8(Adapter, REG_MCUFWDL); ++ ++ //reset the FWDL chksum ++ rtw_write8(Adapter, REG_MCUFWDL, tmp8|FWDL_ChkSum_rpt); ++ ++ //tmp8 = rtw_read8(Adapter, REG_MCUFWDL); ++ //DBG_8192C("Before _WriteFW, REG_MCUFWDL:0x%02x, writeFW_retry:%u\n", tmp8, writeFW_retry); ++ ++ rtStatus = _WriteFW(Adapter, pFirmwareBuf, FirmwareLen); ++ ++ //tmp8 = rtw_read8(Adapter, REG_MCUFWDL); ++ //DBG_8192C("After _WriteFW, REG_MCUFWDL:0x%02x, rtStatus:%d\n", tmp8, rtStatus); ++ ++ if(rtStatus == _SUCCESS || ++writeFW_retry>3) ++ break; ++ } ++ _FWDownloadEnable(Adapter, _FALSE); ++ ++ if(_SUCCESS != rtStatus){ ++ DBG_8192C("DL Firmware failed!\n"); ++ goto Exit; ++ } ++ ++ rtStatus = _FWFreeToGo(Adapter); ++ if(_SUCCESS != rtStatus){ ++ DBG_8192C("DL Firmware failed!\n"); ++ goto Exit; ++ } ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" Firmware is ready to run!\n")); ++ ++Exit: ++ ++ if(pFirmware) { ++ rtw_vmfree((u8*)pFirmware, sizeof(RT_FIRMWARE_92C)); ++ } ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" <=== FirmwareDownload91C()\n")); ++ return rtStatus; ++ ++} ++ ++VOID ++InitializeFirmwareVars92C( ++ IN PADAPTER Adapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ // Init Fw LPS related. ++ Adapter->pwrctrlpriv.bFwCurrentInPSMode = _FALSE; ++ ++ //Init H2C counter. by tynli. 2009.12.09. ++ pHalData->LastHMEBoxNum = 0; ++} ++ ++#ifdef CONFIG_WOWLAN ++//=========================================== ++ ++// ++// Description: Prepare some information to Fw for WoWLAN. ++// (1) Download wowlan Fw. ++// (2) Download RSVD page packets. ++// (3) Enable AP offload if needed. ++// ++// 2011.04.12 by tynli. ++// ++VOID ++SetFwRelatedForWoWLAN8192CU( ++ IN PADAPTER padapter, ++ IN u8 bHostIsGoingtoSleep ++) ++{ ++ int status=_FAIL; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ u8 bRecover = _FALSE; ++ ++ if(bHostIsGoingtoSleep) ++ { ++ // ++ // 1. Before WoWLAN we need to re-download WoWLAN Fw. ++ // ++ status = FirmwareDownload92C(padapter, bHostIsGoingtoSleep); ++ if(status != _SUCCESS) ++ { ++ DBG_8192C("ConfigFwRelatedForWoWLAN8192CU(): Re-Download Firmware failed!!\n"); ++ return; ++ } ++ else ++ { ++ DBG_8192C("ConfigFwRelatedForWoWLAN8192CU(): Re-Download Firmware Success !!\n"); ++ } ++ ++ // ++ // 2. Re-Init the variables about Fw related setting. ++ // ++ InitializeFirmwareVars92C(padapter); ++ ++ ++ } ++} ++#endif // CONFIG_WOWLAN ++ ++#ifdef CONFIG_BT_COEXIST ++static void _update_bt_param(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ struct registry_priv *registry_par = &padapter->registrypriv; ++ ++ if(2 != registry_par->bt_iso) ++ pbtpriv->BT_Ant_isolation = registry_par->bt_iso;// 0:Low, 1:High, 2:From Efuse ++ ++ if(registry_par->bt_sco == 1) // 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy, 5.OtherBusy ++ pbtpriv->BT_Service = BT_OtherAction; ++ else if(registry_par->bt_sco==2) ++ pbtpriv->BT_Service = BT_SCO; ++ else if(registry_par->bt_sco==4) ++ pbtpriv->BT_Service = BT_Busy; ++ else if(registry_par->bt_sco==5) ++ pbtpriv->BT_Service = BT_OtherBusy; ++ else ++ pbtpriv->BT_Service = BT_Idle; ++ ++ pbtpriv->BT_Ampdu = registry_par->bt_ampdu; ++ pbtpriv->bCOBT = _TRUE; ++#if 1 ++ DBG_8192C("BT Coexistance = %s\n", (pbtpriv->BT_Coexist==_TRUE)?"enable":"disable"); ++ if(pbtpriv->BT_Coexist) ++ { ++ if(pbtpriv->BT_Ant_Num == Ant_x2) ++ { ++ DBG_8192C("BlueTooth BT_Ant_Num = Antx2\n"); ++ } ++ else if(pbtpriv->BT_Ant_Num == Ant_x1) ++ { ++ DBG_8192C("BlueTooth BT_Ant_Num = Antx1\n"); ++ } ++ switch(pbtpriv->BT_CoexistType) ++ { ++ case BT_2Wire: ++ DBG_8192C("BlueTooth BT_CoexistType = BT_2Wire\n"); ++ break; ++ case BT_ISSC_3Wire: ++ DBG_8192C("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n"); ++ break; ++ case BT_Accel: ++ DBG_8192C("BlueTooth BT_CoexistType = BT_Accel\n"); ++ break; ++ case BT_CSR_BC4: ++ DBG_8192C("BlueTooth BT_CoexistType = BT_CSR_BC4\n"); ++ break; ++ case BT_RTL8756: ++ DBG_8192C("BlueTooth BT_CoexistType = BT_RTL8756\n"); ++ break; ++ default: ++ DBG_8192C("BlueTooth BT_CoexistType = Unknown\n"); ++ break; ++ } ++ DBG_8192C("BlueTooth BT_Ant_isolation = %d\n", pbtpriv->BT_Ant_isolation); ++ ++ ++ switch(pbtpriv->BT_Service) ++ { ++ case BT_OtherAction: ++ DBG_8192C("BlueTooth BT_Service = BT_OtherAction\n"); ++ break; ++ case BT_SCO: ++ DBG_8192C("BlueTooth BT_Service = BT_SCO\n"); ++ break; ++ case BT_Busy: ++ DBG_8192C("BlueTooth BT_Service = BT_Busy\n"); ++ break; ++ case BT_OtherBusy: ++ DBG_8192C("BlueTooth BT_Service = BT_OtherBusy\n"); ++ break; ++ default: ++ DBG_8192C("BlueTooth BT_Service = BT_Idle\n"); ++ break; ++ } ++ ++ DBG_8192C("BT_RadioSharedType = 0x%x\n", pbtpriv->BT_RadioSharedType); ++ } ++#endif ++ ++} ++ ++ ++#define GET_BT_COEXIST(priv) (&priv->bt_coexist) ++ ++void rtl8192c_ReadBluetoothCoexistInfo( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ u8 rf_opt4; ++ ++ if(AutoloadFail){ ++ pbtpriv->BT_Coexist = _FALSE; ++ pbtpriv->BT_CoexistType= BT_2Wire; ++ pbtpriv->BT_Ant_Num = Ant_x2; ++ pbtpriv->BT_Ant_isolation= 0; ++ pbtpriv->BT_RadioSharedType = BT_Radio_Shared; ++ return; ++ } ++ ++ pbtpriv->BT_Coexist = (((PROMContent[EEPROM_RF_OPT1]&BOARD_TYPE_NORMAL_MASK)>>5) == BOARD_USB_COMBO)?_TRUE:_FALSE; // bit [7:5] ++ rf_opt4 = PROMContent[EEPROM_RF_OPT4]; ++ pbtpriv->BT_CoexistType = ((rf_opt4&0xe)>>1); // bit [3:1] ++ pbtpriv->BT_Ant_Num = (rf_opt4&0x1); // bit [0] ++ pbtpriv->BT_Ant_isolation = ((rf_opt4&0x10)>>4); // bit [4] ++ pbtpriv->BT_RadioSharedType = ((rf_opt4&0x20)>>5); // bit [5] ++ ++ _update_bt_param(Adapter); ++ ++} ++#endif ++ ++VERSION_8192C ++rtl8192c_ReadChipVersion( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ //VERSION_8192C version; ++ u32 ChipVersion=0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ value32 = rtw_read32(Adapter, REG_SYS_CFG); ++ ++ if (value32 & TRP_VAUX_EN) ++ { ++#if 0 ++ // Test chip. ++ if(IS_HARDWARE_TYPE_8723A(Adapter)) { ++ ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0); ++ ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function. ++ } ++ else { ++ version = (value32 & TYPE_ID) ?VERSION_TEST_CHIP_92C :VERSION_TEST_CHIP_88C; ++ } ++#else ++ // tynli_test. 2011.01.10. ++ if(IS_HARDWARE_TYPE_8192C(Adapter)) ++ { ++ ChipVersion = (value32 & TYPE_ID) ? VERSION_TEST_CHIP_92C : VERSION_TEST_CHIP_88C; ++ } ++ else ++ { ++ ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0); ++ ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function. ++ } ++#endif ++ } ++ else ++ { ++#if 0 ++ // Normal mass production chip. ++ ChipVersion = NORMAL_CHIP; ++#if !RTL8723_FPGA_TRUE_PHY_VERIFICATION ++ ChipVersion |= ((value32 & TYPE_ID) ? CHIP_92C : 0); ++#endif ++ ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0); ++ ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function. ++ if(IS_8723_SERIES(ChipVersion)) ++ { ++ if(IS_VENDOR_UMC(ChipVersion)) ++ ChipVersion |= ((value32 & CHIP_VER_RTL_MASK) ? CHIP_VENDOR_UMC_B_CUT : 0); ++ } ++ else ++ { ++ // Mark out by tynli. UMC B-cut IC will not set the SYS_CFG[19] to UMC ++ // because we do not want the custmor to know. 2011.01.11. ++ //if(IS_VENDOR_UMC(ChipVersion)) ++ { ++ // To check the value of B-cut. by tynli. 2011.01.11. ++ u1bTmp = (u1Byte)((value32 & CHIP_VER_RTL_MASK)>>12); ++ if(u1bTmp == 1) ++ { // B-cut ++ ChipVersion |= CHIP_VENDOR_UMC_B_CUT; ++ } ++ } ++ } ++#else ++ // Normal mass production chip. ++ ChipVersion = NORMAL_CHIP; ++//#if !RTL8723_FPGA_TRUE_PHY_VERIFICATION ++ ChipVersion |= ((value32 & TYPE_ID) ? RF_TYPE_2T2R : 0); //92c ++//#endif ++ ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0); ++ ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function. ++ if(IS_HARDWARE_TYPE_8192C(Adapter)) ++ { ++ // 88/92C UMC B-cut IC will not set the SYS_CFG[19] to UMC ++ // because we do not want the custmor to know. by tynli. 2011.01.17. ++ //MSG_8192C("mask result = 0x%x is_UMC %d chipversion 0x%x\n", (value32 & CHIP_VER_RTL_MASK), IS_CHIP_VENDOR_UMC(ChipVersion), ChipVersion); ++ if((!IS_CHIP_VENDOR_UMC(ChipVersion) )&& (value32 & CHIP_VER_RTL_MASK)) ++ { ++ //MSG_8192C("chip mask result = 0x%x\n", ((value32 & CHIP_VER_RTL_MASK) | CHIP_VENDOR_UMC)); ++ ChipVersion |= ((value32 & CHIP_VER_RTL_MASK) | CHIP_VENDOR_UMC); // IC version (CUT) ++ //MSG_8192C("chip version = 0x%x\n", ChipVersion); ++ } ++ } ++ else ++ { ++ if(IS_CHIP_VENDOR_UMC(ChipVersion)) ++ ChipVersion |= ((value32 & CHIP_VER_RTL_MASK)); // IC version (CUT) ++ } ++ ++ if(IS_92C_SERIAL(ChipVersion)) ++ { ++ value32 = rtw_read32(Adapter, REG_HPON_FSM); ++ ChipVersion |= ((CHIP_BONDING_IDENTIFIER(value32) == CHIP_BONDING_92C_1T2R) ? RF_TYPE_1T2R : 0); ++ } ++ else if(IS_8723_SERIES(ChipVersion)) ++ { ++ //RT_ASSERT(IS_HARDWARE_TYPE_8723A(Adapter), ("Incorrect chip version!!\n")); ++ value32 = rtw_read32(Adapter, REG_GPIO_OUTSTS); ++ ChipVersion |= ((value32 & RF_RL_ID)>>20); //ROM code version. ++ } ++#endif ++ ++ } ++ ++ //version = (VERSION_8192C)ChipVersion; ++ ++ // For multi-function consideration. Added by Roger, 2010.10.06. ++ if(IS_8723_SERIES(ChipVersion)) ++ { ++ pHalData->MultiFunc = RT_MULTI_FUNC_NONE; ++ value32 = rtw_read32(Adapter, REG_MULTI_FUNC_CTRL); ++ pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & WL_FUNC_EN) ? RT_MULTI_FUNC_WIFI : 0) ); ++ pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & BT_FUNC_EN) ? RT_MULTI_FUNC_BT : 0) ); ++ pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & GPS_FUNC_EN) ? RT_MULTI_FUNC_GPS : 0) ); ++ pHalData->PolarityCtl = ((value32 & WL_HWPDN_SL) ? RT_POLARITY_HIGH_ACT : RT_POLARITY_LOW_ACT); ++ //MSG_8192C("ReadChipVersion(): MultiFunc(%x), PolarityCtl(%x) \n", pHalData->MultiFunc, pHalData->PolarityCtl); ++ ++ //For regulator mode. by tynli. 2011.01.14 ++ pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR); ++ //MSG_8192C("ReadChipVersion(): RegulatorMode(%x) \n", pHalData->RegulatorMode); ++ } ++ ++//#if DBG ++#if 1 ++ switch(ChipVersion) ++ { ++ case VERSION_NORMAL_TSMC_CHIP_92C_1T2R: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C_1T2R.\n"); ++ break; ++ case VERSION_NORMAL_TSMC_CHIP_92C: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.\n"); ++ break; ++ case VERSION_NORMAL_TSMC_CHIP_88C: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_92C_A_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_A_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_88C_A_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_A_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_92C_B_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_B_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_88C_B_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.\n"); ++ break; ++ case VERSION_TEST_CHIP_92C: ++ MSG_8192C("Chip Version ID: VERSION_TEST_CHIP_92C.\n"); ++ break; ++ case VERSION_TEST_CHIP_88C: ++ MSG_8192C("Chip Version ID: VERSION_TEST_CHIP_88C.\n"); ++ break; ++ case VERSION_TEST_UMC_CHIP_8723: ++ MSG_8192C("Chip Version ID: VERSION_TEST_UMC_CHIP_8723.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMA_UMC_CHIP_8723_1T1R_A_CUT.\n"); ++ break; ++ case VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT: ++ MSG_8192C("Chip Version ID: VERSION_NORMA_UMC_CHIP_8723_1T1R_B_CUT.\n"); ++ break; ++ default: ++ MSG_8192C("Chip Version ID: ???????????????.\n"); ++ break; ++ } ++#endif ++ ++ pHalData->VersionID = ChipVersion; ++ ++ if(IS_1T2R(ChipVersion)) ++ pHalData->rf_type = RF_1T2R; ++ else if(IS_2T2R(ChipVersion)) ++ pHalData->rf_type = RF_2T2R; ++ else if(IS_8723_SERIES(ChipVersion)) ++ pHalData->rf_type = RF_1T1R; ++ else ++ pHalData->rf_type = RF_1T1R; ++ ++ MSG_8192C("RF_Type is %x!!\n", pHalData->rf_type); ++ ++ return ChipVersion; ++} ++ ++void ++rtl8192c_EfuseParseChnlPlan( ++ IN PADAPTER padapter, ++ IN u8* hwinfo, ++ IN BOOLEAN AutoLoadFail ++ ) ++{ ++ padapter->mlmepriv.ChannelPlan = hal_com_get_channel_plan( ++ padapter ++ , hwinfo?hwinfo[EEPROM_CHANNEL_PLAN]:0xFF ++ , padapter->registrypriv.channel_plan ++ , RT_CHANNEL_DOMAIN_WORLD_WIDE_13 ++ , AutoLoadFail ++ ); ++ ++ DBG_871X("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan); ++} ++ ++u8 GetEEPROMSize8192C(PADAPTER Adapter) ++{ ++ u8 size = 0; ++ u32 curRCR; ++ ++ curRCR = rtw_read16(Adapter, REG_9346CR); ++ size = (curRCR & BOOT_FROM_EEPROM) ? 6 : 4; // 6: EEPROM used is 93C46, 4: boot from E-Fuse. ++ ++ MSG_8192C("EEPROM type is %s\n", size==4 ? "E-FUSE" : "93C46"); ++ ++ return size; ++} ++ ++void rtl8192c_free_hal_data(_adapter * padapter) ++{ ++_func_enter_; ++ ++ DBG_8192C("=====> rtl8192c_free_hal_data =====\n"); ++ ++ if(padapter->HalData) ++ rtw_mfree(padapter->HalData, sizeof(HAL_DATA_TYPE)); ++ DBG_8192C("<===== rtl8192c_free_hal_data =====\n"); ++ ++_func_exit_; ++} ++ ++//=========================================================== ++// Efuse related code ++//=========================================================== ++enum{ ++ VOLTAGE_V25 = 0x03, ++ LDOE25_SHIFT = 28 , ++ }; ++ ++static VOID ++hal_EfusePowerSwitch_RTL8192C( ++ IN PADAPTER pAdapter, ++ IN u8 bWrite, ++ IN u8 PwrState) ++{ ++ u8 tempval; ++ u16 tmpV16; ++ ++ if (PwrState == _TRUE) ++ { ++ // 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_ISO_CTRL); ++ if( ! (tmpV16 & PWC_EV12V ) ){ ++ tmpV16 |= PWC_EV12V ; ++ rtw_write16(pAdapter,REG_SYS_ISO_CTRL,tmpV16); ++ } ++ // Reset: 0x0000h[28], default valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_FUNC_EN); ++ if( !(tmpV16 & FEN_ELDR) ){ ++ tmpV16 |= FEN_ELDR ; ++ rtw_write16(pAdapter,REG_SYS_FUNC_EN,tmpV16); ++ } ++ ++ // Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_CLKR); ++ if( (!(tmpV16 & LOADER_CLK_EN) ) ||(!(tmpV16 & ANA8M) ) ){ ++ tmpV16 |= (LOADER_CLK_EN |ANA8M ) ; ++ rtw_write16(pAdapter,REG_SYS_CLKR,tmpV16); ++ } ++ ++ if(bWrite == _TRUE) ++ { ++ // Enable LDO 2.5V before read/write action ++ tempval = rtw_read8(pAdapter, EFUSE_TEST+3); ++ tempval &= 0x0F; ++ tempval |= (VOLTAGE_V25 << 4); ++ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80)); ++ } ++ } ++ else ++ { ++ if(bWrite == _TRUE){ ++ // Disable LDO 2.5V after read/write action ++ tempval = rtw_read8(pAdapter, EFUSE_TEST+3); ++ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F)); ++ } ++ } ++} ++ ++static VOID ++hal_EfusePowerSwitch_RTL8723( ++ IN PADAPTER pAdapter, ++ IN u8 bWrite, ++ IN u8 PwrState) ++{ ++ u8 tempval; ++ u16 tmpV16; ++ ++ if (PwrState == _TRUE) ++ { ++ rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON); ++ ++ // 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_ISO_CTRL); ++ if( ! (tmpV16 & PWC_EV12V ) ){ ++ tmpV16 |= PWC_EV12V ; ++ rtw_write16(pAdapter,REG_SYS_ISO_CTRL,tmpV16); ++ } ++ // Reset: 0x0000h[28], default valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_FUNC_EN); ++ if( !(tmpV16 & FEN_ELDR) ){ ++ tmpV16 |= FEN_ELDR ; ++ rtw_write16(pAdapter,REG_SYS_FUNC_EN,tmpV16); ++ } ++ ++ // Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid ++ tmpV16 = rtw_read16(pAdapter,REG_SYS_CLKR); ++ if( (!(tmpV16 & LOADER_CLK_EN) ) ||(!(tmpV16 & ANA8M) ) ){ ++ tmpV16 |= (LOADER_CLK_EN |ANA8M ) ; ++ rtw_write16(pAdapter,REG_SYS_CLKR,tmpV16); ++ } ++ ++ if(bWrite == _TRUE) ++ { ++ // Enable LDO 2.5V before read/write action ++ tempval = rtw_read8(pAdapter, EFUSE_TEST+3); ++ tempval &= 0x0F; ++ tempval |= (VOLTAGE_V25 << 4); ++ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80)); ++ } ++ } ++ else ++ { ++ rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF); ++ ++ if(bWrite == _TRUE){ ++ // Disable LDO 2.5V after read/write action ++ tempval = rtw_read8(pAdapter, EFUSE_TEST+3); ++ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F)); ++ } ++ } ++} ++ ++static VOID ++rtl8192c_EfusePowerSwitch( ++ IN PADAPTER pAdapter, ++ IN u8 bWrite, ++ IN u8 PwrState) ++{ ++ if(IS_HARDWARE_TYPE_8192C(pAdapter)) ++ { ++ hal_EfusePowerSwitch_RTL8192C(pAdapter, bWrite, PwrState); ++ } ++ else if(IS_HARDWARE_TYPE_8723A(pAdapter)) ++ { ++ hal_EfusePowerSwitch_RTL8723(pAdapter, bWrite, PwrState); ++ } ++} ++ ++static VOID ++ReadEFuse_RTL8192C( ++ PADAPTER Adapter, ++ u16 _offset, ++ u16 _size_byte, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ u8 efuseTbl[EFUSE_MAP_LEN]; ++ u8 rtemp8[1]; ++ u16 eFuse_Addr = 0; ++ u8 offset, wren; ++ u16 i, j; ++ u16 eFuseWord[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT]; ++ u16 efuse_utilized = 0; ++ u8 efuse_usage = 0; ++ ++ // ++ // Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. ++ // ++ if((_offset + _size_byte)>EFUSE_MAP_LEN) ++ {// total E-Fuse table is 128bytes ++ //DBG_8192C("ReadEFuse_RTL8192C(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte); ++ return; ++ } ++ ++ // 0. Refresh efuse init map as all oxFF. ++ for (i = 0; i < EFUSE_MAX_SECTION; i++) ++ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) ++ eFuseWord[i][j] = 0xFFFF; ++ ++ ++ // ++ // 1. Read the first byte to check if efuse is empty!!! ++ // ++ // ++ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); ++ if(*rtemp8 != 0xFF) ++ { ++ efuse_utilized++; ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr)); ++ eFuse_Addr++; ++ } ++ ++ // ++ // 2. Read real efuse content. Filter PG header and every section data. ++ // ++ while((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN)) ++ { ++ // Check PG header for section num. ++ offset = ((*rtemp8 >> 4) & 0x0f); ++ ++ if(offset < EFUSE_MAX_SECTION) ++ { ++ // Get word enable value from PG header ++ wren = (*rtemp8 & 0x0f); ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wren)); ++ ++ for(i=0; i= EFUSE_REAL_CONTENT_LEN) ++ break; ++ ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr)); ++ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); eFuse_Addr++; ++ efuse_utilized++; ++ eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00); ++ ++ if(eFuse_Addr >= EFUSE_REAL_CONTENT_LEN) ++ break; ++ } ++ ++ wren >>= 1; ++ ++ } ++ } ++ ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr)); ++ // Read next PG header ++ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest); ++ if(*rtemp8 != 0xFF && (eFuse_Addr < 512)) ++ { ++ efuse_utilized++; ++ eFuse_Addr++; ++ } ++ } ++ ++ // ++ // 3. Collect 16 sections and 4 word unit into Efuse map. ++ // ++ for(i=0; i> 8) & 0xff); ++ } ++ } ++ ++ // ++ // 4. Copy from Efuse map to output pointer memory!!! ++ // ++ for(i=0; i<_size_byte; i++) ++ { ++ pbuf[i] = efuseTbl[_offset+i]; ++ } ++ ++ // ++ // 5. Calculate Efuse utilization. ++ // ++ efuse_usage = (u8)((efuse_utilized*100)/EFUSE_REAL_CONTENT_LEN); ++ rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_utilized); ++ //rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_USAGE, (pu1Byte)&efuse_usage); ++} ++ ++static VOID ++ReadEFuse_RTL8723( ++ PADAPTER Adapter, ++ u16 _offset, ++ u16 _size_byte, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ u8 efuseTbl[EFUSE_MAP_LEN_8723]; ++ u16 eFuse_Addr = 0; ++ u8 offset = 0, wden = 0; ++ u16 i, j; ++ u16 eFuseWord[EFUSE_MAX_SECTION_8723][EFUSE_MAX_WORD_UNIT]; ++ u16 efuse_utilized = 0; ++ u8 efuse_usage = 0; ++ u8 offset_2_0=0; ++ u8 efuseHeader=0, efuseExtHdr=0, efuseData=0; ++ // ++ // Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. ++ // ++ if((_offset + _size_byte)>EFUSE_MAP_LEN_8723) ++ { ++ //RT_TRACE(COMP_EFUSE, DBG_LOUD, ("ReadEFuse_RTL8723(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte)); ++ return; ++ } ++ ++ // 0. Refresh efuse init map as all oxFF. ++ for (i = 0; i < EFUSE_MAX_SECTION_8723; i++) ++ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) ++ eFuseWord[i][j] = 0xFFFF; ++ ++ // ++ // 1. Read the first byte to check if efuse is empty!!! ++ // ++ // ++ ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest); ++ ++ if(efuseHeader != 0xFF) ++ { ++ efuse_utilized++; ++ } ++ else ++ { ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("EFUSE is empty\n")); ++ return; ++ } ++ ++ ++ // ++ // 2. Read real efuse content. Filter PG header and every section data. ++ // ++ while((efuseHeader != 0xFF) && AVAILABLE_EFUSE_ADDR(eFuse_Addr)) ++ { ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseHeader)); ++ ++ // Check PG header for section num. ++ if(EXT_HEADER(efuseHeader)) //extended header ++ { ++ offset_2_0 = GET_HDR_OFFSET_2_0(efuseHeader); ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("extended header offset_2_0=%x\n", offset_2_0)); ++ ++ ReadEFuseByte(Adapter, eFuse_Addr++, &efuseExtHdr, bPseudoTest); ++ ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseExtHdr)); ++ ++ if(efuseExtHdr != 0xff) ++ { ++ efuse_utilized++; ++ if(ALL_WORDS_DISABLED(efuseExtHdr)) ++ { ++ ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest); ++ if(efuseHeader != 0xff) ++ { ++ efuse_utilized++; ++ } ++ continue; ++ } ++ else ++ { ++ offset = ((efuseExtHdr & 0xF0) >> 1) | offset_2_0; ++ wden = (efuseExtHdr & 0x0F); ++ } ++ } ++ else ++ { ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Error condition, extended = 0xff\n")); ++ // We should handle this condition. ++ } ++ } ++ else ++ { ++ offset = ((efuseHeader >> 4) & 0x0f); ++ wden = (efuseHeader & 0x0f); ++ } ++ ++ if(offset < EFUSE_MAX_SECTION_8723) ++ { ++ // Get word enable value from PG header ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wden)); ++ ++ for(i=0; i> 8) & 0xff); ++ } ++ } ++ ++ // ++ // 4. Copy from Efuse map to output pointer memory!!! ++ // ++ for(i=0; i<_size_byte; i++) ++ { ++ pbuf[i] = efuseTbl[_offset+i]; ++ } ++ ++ // ++ // 5. Calculate Efuse utilization. ++ // ++ efuse_usage = (u8)((efuse_utilized*100)/EFUSE_REAL_CONTENT_LEN); ++ rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_utilized); ++ //rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_USAGE, (pu1Byte)&efuse_usage); ++} ++ ++static BOOLEAN ++Hal_EfuseSwitchToBank( ++ IN PADAPTER pAdapter, ++ IN u8 bank, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ BOOLEAN bRet = _FALSE; ++ u32 value32=0; ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Efuse switch bank to %d\n", bank)); ++ if(bPseudoTest) ++ { ++ fakeEfuseBank = bank; ++ bRet = _TRUE; ++ } ++ else ++ { ++ if(IS_HARDWARE_TYPE_8723A(pAdapter) && ++ INCLUDE_MULTI_FUNC_BT(pAdapter)) ++ { ++ value32 = rtw_read32(pAdapter, EFUSE_TEST); ++ bRet = _TRUE; ++ switch(bank) ++ { ++ case 0: ++ value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_WIFI_SEL_0); ++ break; ++ case 1: ++ value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_0); ++ break; ++ case 2: ++ value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_1); ++ break; ++ case 3: ++ value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_2); ++ break; ++ default: ++ value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_WIFI_SEL_0); ++ bRet = _FALSE; ++ break; ++ } ++ rtw_write32(pAdapter, EFUSE_TEST, value32); ++ } ++ else ++ bRet = _TRUE; ++ } ++ return bRet; ++} ++ ++static VOID ++ReadEFuse_BT( ++ PADAPTER Adapter, ++ u16 _offset, ++ u16 _size_byte, ++ u8 *pbuf, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ u8 *efuseTbl; ++ u16 eFuse_Addr = 0; ++ u8 offset = 0, wden = 0; ++ u16 i, j; ++ u16 **eFuseWord; ++ u16 efuse_utilized = 0; ++ u8 efuse_usage = 0; ++ u8 offset_2_0=0; ++ u8 efuseHeader=0, efuseExtHdr=0, efuseData=0; ++ u8 bank=0; ++ BOOLEAN bCheckNextBank=_FALSE; ++ ++ efuseTbl = rtw_malloc(EFUSE_BT_MAP_LEN); ++ if(efuseTbl == NULL){ ++ DBG_8192C("efuseTbl malloc fail !\n"); ++ return; ++ } ++ ++ eFuseWord = (u16 **)rtw_zmalloc(sizeof(u16 *)*EFUSE_BT_MAX_SECTION); ++ if(eFuseWord == NULL){ ++ DBG_8192C("eFuseWord malloc fail !\n"); ++ return; ++ } ++ else{ ++ for(i=0;iEFUSE_BT_MAP_LEN) ++ { ++ //RT_TRACE(COMP_EFUSE, DBG_LOUD, ("ReadEFuse_BT(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte)); ++ return; ++ } ++ ++ // 0. Refresh efuse init map as all oxFF. ++ for (i = 0; i < EFUSE_BT_MAX_SECTION; i++) ++ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) ++ eFuseWord[i][j] = 0xFFFF; ++ ++ for(bank=1; bank> 1) | offset_2_0; ++ wden = (efuseExtHdr & 0x0F); ++ } ++ } ++ else ++ { ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Error condition, extended = 0xff\n")); ++ // We should handle this condition. ++ } ++ } ++ else ++ { ++ offset = ((efuseHeader >> 4) & 0x0f); ++ wden = (efuseHeader & 0x0f); ++ } ++ ++ if(offset < EFUSE_BT_MAX_SECTION) ++ { ++ // Get word enable value from PG header ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wden)); ++ ++ for(i=0; i= EFUSE_REAL_CONTENT_LEN) ++ bCheckNextBank = _TRUE; ++ else ++ bCheckNextBank = _FALSE; ++ } ++ } ++ if(!bCheckNextBank) ++ { ++ //RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Stop to check next bank\n")); ++ break; ++ } ++ } ++ ++ // switch bank back to bank 0 for later BT and wifi use. ++ Hal_EfuseSwitchToBank(Adapter, 0, bPseudoTest); ++ ++ // ++ // 3. Collect 16 sections and 4 word unit into Efuse map. ++ // ++ for(i=0; i> 8) & 0xff); ++ } ++ } ++ ++ // ++ // 4. Copy from Efuse map to output pointer memory!!! ++ // ++ for(i=0; i<_size_byte; i++) ++ { ++ pbuf[i] = efuseTbl[_offset+i]; ++ } ++ ++ // ++ // 5. Calculate Efuse utilization. ++ // ++ efuse_usage = (u8)((efuse_utilized*100)/EFUSE_BT_REAL_CONTENT_LEN); ++ if(bPseudoTest) ++ { ++ fakeBTEfuseUsedBytes = (EFUSE_REAL_CONTENT_LEN*(bank-1))+eFuse_Addr-1; ++ } ++ else ++ { ++ BTEfuseUsedBytes = (EFUSE_REAL_CONTENT_LEN*(bank-1))+eFuse_Addr-1; ++ } ++ ++ for(i=0;i>4) & 0x0F; ++ hworden = efuse_data & 0x0F; ++ word_cnts = Efuse_CalculateWordCnts(hworden); ++ //read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ } ++ else ++ { ++ bContinual = _FALSE ; ++ } ++ } ++ ++ return efuse_addr; ++} ++ ++static u16 ++Hal_EfuseGetCurrentSize_BT(IN PADAPTER pAdapter, ++ IN BOOLEAN bPseudoTest) ++{ ++ int bContinual = _TRUE; ++ u16 efuse_addr = 0; ++ u8 hoffset=0,hworden=0; ++ u8 efuse_data,word_cnts=0; ++ u8 bank=0, startBank=0; ++ u16 retU2=0; ++ u32 total_efuse_used=0; ++ ++ if(bPseudoTest) ++ { ++ efuse_addr = (u16)((fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN)); ++ startBank = (u8)(1+(fakeBTEfuseUsedBytes/EFUSE_REAL_CONTENT_LEN)); ++ } ++ else ++ { ++ efuse_addr = (u16)((BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN)); ++ startBank = (u8)(1+(BTEfuseUsedBytes/EFUSE_REAL_CONTENT_LEN)); ++ } ++ ++ if((startBank < 1) || (startBank >= EFUSE_MAX_BANK)) ++ DBG_8192C("Error, bank error, bank=%d\n", bank); ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), start bank=%d, start_efuse_addr = %d\n", startBank, efuse_addr)); ++ ++ for(bank=startBank; bank> 5) | ((efuse_data & 0xF0) >> 1); ++ hworden = efuse_data & 0x0F; ++ } ++ } ++ else ++ { ++ hoffset = (efuse_data>>4) & 0x0F; ++ hworden = efuse_data & 0x0F; ++ } ++ word_cnts = Efuse_CalculateWordCnts(hworden); ++ //read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ } ++ else ++ { ++ bContinual = _FALSE ; ++ } ++ } ++ ++ // Check if we need to check next bank efuse ++ if(efuse_addr < (EFUSE_REAL_CONTENT_LEN-EFUSE_PROTECT_BYTES_BANK)) ++ { ++ break;// don't need to check next bank. ++ } ++ } ++ ++ retU2 = ((bank-1)*EFUSE_REAL_CONTENT_LEN)+efuse_addr; ++ if(bPseudoTest) ++ { ++ fakeBTEfuseUsedBytes = retU2; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), return %d\n", fakeBTEfuseUsedBytes)); ++ } ++ else ++ { ++ BTEfuseUsedBytes = retU2; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), return %d\n", BTEfuseUsedBytes)); ++ } ++ ++ return retU2; ++} ++ ++ ++static u16 ++hal_EfuseGetCurrentSize_8723(IN PADAPTER pAdapter, ++ IN BOOLEAN bPseudoTest) ++{ ++ int bContinual = _TRUE; ++ ++ u16 efuse_addr = 0; ++ u8 hoffset=0,hworden=0; ++ u8 efuse_data,word_cnts=0; ++ ++ if(bPseudoTest) ++ { ++ efuse_addr = (u16)(fakeEfuseUsedBytes); ++ } ++ else ++ { ++ rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr); ++ } ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), start_efuse_addr = %d\n", efuse_addr)); ++ ++ while ( bContinual && ++ efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) && ++ AVAILABLE_EFUSE_ADDR(efuse_addr)) ++ { ++ if(efuse_data!=0xFF) ++ { ++ if((efuse_data&0x1F) == 0x0F) //extended header ++ { ++ hoffset = efuse_data; ++ efuse_addr++; ++ efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest); ++ if((efuse_data & 0x0F) == 0x0F) ++ { ++ efuse_addr++; ++ continue; ++ } ++ else ++ { ++ hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); ++ hworden = efuse_data & 0x0F; ++ } ++ } ++ else ++ { ++ hoffset = (efuse_data>>4) & 0x0F; ++ hworden = efuse_data & 0x0F; ++ } ++ word_cnts = Efuse_CalculateWordCnts(hworden); ++ //read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ } ++ else ++ { ++ bContinual = _FALSE ; ++ } ++ } ++ ++ if(bPseudoTest) ++ { ++ fakeEfuseUsedBytes = efuse_addr; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), return %d\n", fakeEfuseUsedBytes)); ++ } ++ else ++ { ++ rtw_hal_set_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr); ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), return %d\n", efuse_addr)); ++ } ++ ++ return efuse_addr; ++} ++ ++static u16 ++Hal_EfuseGetCurrentSize_Pseudo(IN PADAPTER pAdapter, ++ IN BOOLEAN bPseudoTest) ++{ ++ u16 ret=0; ++ ++ ret = hal_EfuseGetCurrentSize_8723(pAdapter, bPseudoTest); ++ ++ return ret; ++} ++ ++static u16 ++rtl8192c_EfuseGetCurrentSize( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN BOOLEAN bPseudoTest) ++{ ++ u16 ret=0; ++ ++ if(efuseType == EFUSE_WIFI) ++ { ++ if(bPseudoTest) ++ { ++ ret = Hal_EfuseGetCurrentSize_Pseudo(pAdapter, bPseudoTest); ++ } ++ else ++ { ++ if(IS_HARDWARE_TYPE_8192C(pAdapter)) ++ { ++ ret = hal_EfuseGetCurrentSize_8192C(pAdapter, bPseudoTest); ++ } ++ else if(IS_HARDWARE_TYPE_8723A(pAdapter)) ++ { ++ ret = hal_EfuseGetCurrentSize_8723(pAdapter, bPseudoTest); ++ } ++ } ++ } ++ else ++ { ++ ret = Hal_EfuseGetCurrentSize_BT(pAdapter, bPseudoTest); ++ } ++ ++ return ret; ++} ++ ++static int ++hal_EfusePgPacketRead_8192C( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 ReadState = PG_STATE_HEADER; ++ ++ int bContinual = _TRUE; ++ int bDataEmpty = _TRUE ; ++ ++ u8 efuse_data,word_cnts=0; ++ u16 efuse_addr = 0; ++ u8 hoffset=0,hworden=0; ++ u8 tmpidx=0; ++ u8 tmpdata[8]; ++ ++ if(data==NULL) return _FALSE; ++ if(offset>15) return _FALSE; ++ ++ ++ _rtw_memset((PVOID)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); ++ _rtw_memset((PVOID)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); ++ ++ // ++ // Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. ++ // Skip dummy parts to prevent unexpected data read from Efuse. ++ // By pass right now. 2009.02.19. ++ // ++ while(bContinual && (efuse_addr < EFUSE_REAL_CONTENT_LEN) ) ++ { ++ //------- Header Read ------------- ++ if(ReadState & PG_STATE_HEADER) ++ { ++ if(efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest)&&(efuse_data!=0xFF)){ ++ hoffset = (efuse_data>>4) & 0x0F; ++ hworden = efuse_data & 0x0F; ++ word_cnts = Efuse_CalculateWordCnts(hworden); ++ bDataEmpty = _TRUE ; ++ ++ if(hoffset==offset){ ++ for(tmpidx = 0;tmpidx< word_cnts*2 ;tmpidx++){ ++ if(efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx ,&efuse_data, bPseudoTest) ){ ++ tmpdata[tmpidx] = efuse_data; ++ if(efuse_data!=0xff){ ++ bDataEmpty = _FALSE; ++ } ++ } ++ } ++ if(bDataEmpty==_FALSE){ ++ ReadState = PG_STATE_DATA; ++ }else{//read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ } ++ else{//read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ ++ } ++ else{ ++ bContinual = _FALSE ; ++ } ++ } ++ //------- Data section Read ------------- ++ else if(ReadState & PG_STATE_DATA) ++ { ++ efuse_WordEnableDataRead(hworden,tmpdata,data); ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ ++ } ++ ++ if( (data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff) && (data[3]==0xff) && ++ (data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff) && (data[7]==0xff)) ++ return _FALSE; ++ else ++ return _TRUE; ++ ++} ++ ++static int ++hal_EfusePgPacketRead_8723( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 ReadState = PG_STATE_HEADER; ++ ++ int bContinual = _TRUE; ++ int bDataEmpty = _TRUE ; ++ ++ u8 efuse_data,word_cnts=0; ++ u16 efuse_addr = 0; ++ u8 hoffset=0,hworden=0; ++ u8 tmpidx=0; ++ u8 tmpdata[8]; ++ u8 max_section=0; ++ u8 tmp_header = 0; ++ ++ EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAX_SECTION, (PVOID)&max_section, bPseudoTest); ++ ++ if(data==NULL) ++ return _FALSE; ++ if(offset>max_section) ++ return _FALSE; ++ ++ _rtw_memset((PVOID)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); ++ _rtw_memset((PVOID)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE); ++ ++ ++ // ++ // Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. ++ // Skip dummy parts to prevent unexpected data read from Efuse. ++ // By pass right now. 2009.02.19. ++ // ++ while(bContinual && AVAILABLE_EFUSE_ADDR(efuse_addr) ) ++ { ++ //------- Header Read ------------- ++ if(ReadState & PG_STATE_HEADER) ++ { ++ if(efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest)&&(efuse_data!=0xFF)) ++ { ++ if(EXT_HEADER(efuse_data)) ++ { ++ tmp_header = efuse_data; ++ efuse_addr++; ++ efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest); ++ if(!ALL_WORDS_DISABLED(efuse_data)) ++ { ++ hoffset = ((tmp_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); ++ hworden = efuse_data & 0x0F; ++ } ++ else ++ { ++ DBG_8192C("Error, All words disabled\n"); ++ efuse_addr++; ++ continue; ++ } ++ } ++ else ++ { ++ hoffset = (efuse_data>>4) & 0x0F; ++ hworden = efuse_data & 0x0F; ++ } ++ word_cnts = Efuse_CalculateWordCnts(hworden); ++ bDataEmpty = _TRUE ; ++ ++ if(hoffset==offset) ++ { ++ for(tmpidx = 0;tmpidx< word_cnts*2 ;tmpidx++) ++ { ++ if(efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx ,&efuse_data, bPseudoTest) ) ++ { ++ tmpdata[tmpidx] = efuse_data; ++ if(efuse_data!=0xff) ++ { ++ bDataEmpty = _FALSE; ++ } ++ } ++ } ++ if(bDataEmpty==_FALSE){ ++ ReadState = PG_STATE_DATA; ++ }else{//read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ } ++ else{//read next header ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ ++ } ++ else{ ++ bContinual = _FALSE ; ++ } ++ } ++ //------- Data section Read ------------- ++ else if(ReadState & PG_STATE_DATA) ++ { ++ efuse_WordEnableDataRead(hworden,tmpdata,data); ++ efuse_addr = efuse_addr + (word_cnts*2)+1; ++ ReadState = PG_STATE_HEADER; ++ } ++ ++ } ++ ++ if( (data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff) && (data[3]==0xff) && ++ (data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff) && (data[7]==0xff)) ++ return _FALSE; ++ else ++ return _TRUE; ++ ++} ++ ++static int ++Hal_EfusePgPacketRead( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret=0; ++ ++ if(IS_HARDWARE_TYPE_8192C(pAdapter)) ++ { ++ ret = hal_EfusePgPacketRead_8192C(pAdapter, offset, data, bPseudoTest); ++ } ++ else if(IS_HARDWARE_TYPE_8723A(pAdapter)) ++ { ++ ret = hal_EfusePgPacketRead_8723(pAdapter, offset, data, bPseudoTest); ++ } ++ ++ return ret; ++} ++ ++static int ++Hal_EfusePgPacketRead_Pseudo( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret=0; ++ ++ ret = hal_EfusePgPacketRead_8723(pAdapter, offset, data, bPseudoTest); ++ ++ return ret; ++} ++ ++static int ++rtl8192c_Efuse_PgPacketRead( IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret=0; ++ ++ if(bPseudoTest) ++ { ++ ret = Hal_EfusePgPacketRead_Pseudo(pAdapter, offset, data, bPseudoTest); ++ } ++ else ++ { ++ ret = Hal_EfusePgPacketRead(pAdapter, offset, data, bPseudoTest); ++ } ++ ++ return ret; ++} ++ ++static BOOLEAN ++hal_EfuseFixHeaderProcess( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN PPGPKT_STRUCT pFixPkt, ++ IN u16 *pAddr, ++ IN BOOLEAN bPseudoTest ++) ++{ ++ u8 originaldata[8], badworden=0; ++ u16 efuse_addr=*pAddr; ++ u32 PgWriteSuccess=0; ++ ++ _rtw_memset((PVOID)originaldata, 0xff, 8); ++ ++ if(Efuse_PgPacketRead(pAdapter, pFixPkt->offset, originaldata, bPseudoTest)) ++ { //check if data exist ++ badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pFixPkt->word_en, originaldata, bPseudoTest); ++ ++ if(badworden != 0xf) // write fail ++ { ++ if(efuseType == EFUSE_WIFI) ++ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest); ++ else ++ PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest); ++ if(!PgWriteSuccess) ++ return _FALSE; ++ else ++ efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest); ++ } ++ else ++ { ++ efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) +1; ++ } ++ } ++ else ++ { ++ efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) +1; ++ } ++ *pAddr = efuse_addr; ++ return _TRUE; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWrite2ByteHeader( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest) ++{ ++ BOOLEAN bRet=_FALSE, bContinual=_TRUE; ++ u16 efuse_addr=*pAddr, efuse_max_available_len=0; ++ u8 pg_header=0, tmp_header=0, pg_header_temp=0; ++ u8 repeatcnt=0; ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Wirte 2byte header\n")); ++ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (PVOID)&efuse_max_available_len, bPseudoTest); ++ ++ while(efuse_addr < efuse_max_available_len) ++ { ++ pg_header = ((pTargetPkt->offset & 0x07) << 5) | 0x0F; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("pg_header = 0x%x\n", pg_header)); ++ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); ++ ++ while(tmp_header == 0xFF) ++ { ++ if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for pg_header!!\n")); ++ return _FALSE; ++ } ++ ++ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); ++ } ++ ++ //to write ext_header ++ if(tmp_header == pg_header) ++ { ++ efuse_addr++; ++ pg_header_temp = pg_header; ++ pg_header = ((pTargetPkt->offset & 0x78) << 1) | pTargetPkt->word_en; ++ ++ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); ++ ++ while(tmp_header == 0xFF) ++ { ++ if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for ext_header!!\n")); ++ return _FALSE; ++ } ++ ++ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); ++ } ++ ++ if((tmp_header & 0x0F) == 0x0F) //word_en PG fail ++ { ++ if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for word_en!!\n")); ++ return _FALSE; ++ } ++ else ++ { ++ efuse_addr++; ++ continue; ++ } ++ } ++ else if(pg_header != tmp_header) //offset PG fail ++ { ++ PGPKT_STRUCT fixPkt; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Error condition for offset PG fail, need to cover the existed data\n")); ++ fixPkt.offset = ((pg_header_temp & 0xE0) >> 5) | ((tmp_header & 0xF0) >> 1); ++ fixPkt.word_en = tmp_header & 0x0F; ++ fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en); ++ if(!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest)) ++ return _FALSE; ++ } ++ else ++ { ++ bRet = _TRUE; ++ break; ++ } ++ } ++ else if ((tmp_header & 0x1F) == 0x0F) //wrong extended header ++ { ++ efuse_addr+=2; ++ continue; ++ } ++ } ++ ++ *pAddr = efuse_addr; ++ return bRet; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWrite1ByteHeader( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest) ++{ ++ BOOLEAN bRet=_FALSE; ++ u8 pg_header=0, tmp_header=0; ++ u16 efuse_addr=*pAddr; ++ u8 repeatcnt=0; ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Wirte 1byte header\n")); ++ pg_header = ((pTargetPkt->offset << 4) & 0xf0) |pTargetPkt->word_en; ++ ++ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest); ++ ++ while(tmp_header == 0xFF) ++ { ++ if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) ++ { ++ return _FALSE; ++ } ++ efuse_OneByteWrite(pAdapter,efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter,efuse_addr, &tmp_header, bPseudoTest); ++ } ++ ++ if(pg_header == tmp_header) ++ { ++ bRet = _TRUE; ++ } ++ else ++ { ++ PGPKT_STRUCT fixPkt; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Error condition for fixed PG packet, need to cover the existed data\n")); ++ fixPkt.offset = (tmp_header>>4) & 0x0F; ++ fixPkt.word_en = tmp_header & 0x0F; ++ fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en); ++ if(!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest)) ++ return _FALSE; ++ } ++ ++ *pAddr = efuse_addr; ++ return bRet; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWriteData( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest) ++{ ++ BOOLEAN bRet=_FALSE; ++ u16 efuse_addr=*pAddr; ++ u8 badworden=0; ++ u32 PgWriteSuccess=0; ++ ++ badworden = 0x0f; ++ badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pTargetPkt->word_en, pTargetPkt->data, bPseudoTest); ++ if(badworden == 0x0F) ++ { ++ // write ok ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWriteData ok!!\n")); ++ return _TRUE; ++ } ++ else ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWriteData Fail!!\n")); ++ //reorganize other pg packet ++ if(efuseType == EFUSE_WIFI) ++ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); ++ else ++ PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); ++ if(!PgWriteSuccess) ++ return _FALSE; ++ else ++ return _TRUE; ++ } ++ ++ return bRet; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWriteHeader( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest) ++{ ++ BOOLEAN bRet=_FALSE; ++ ++ if(pTargetPkt->offset >= EFUSE_MAX_SECTION_BASE) ++ { ++ bRet = hal_EfusePgPacketWrite2ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest); ++ } ++ else ++ { ++ bRet = hal_EfusePgPacketWrite1ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest); ++ } ++ ++ return bRet; ++} ++ ++static BOOLEAN ++hal_EfusePgCheckAvailableAddr( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ u16 efuse_max_available_len=0; ++ ++ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&efuse_max_available_len, bPseudoTest); ++ //RTPRINT(FEEPROM, EFUSE_PG, ("efuse_max_available_len = %d\n", efuse_max_available_len)); ++ ++ if(Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgCheckAvailableAddr error!!\n")); ++ return _FALSE; ++ } ++ return _TRUE; ++} ++ ++static VOID ++hal_EfuseConstructPGPkt( ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *pData, ++ IN PPGPKT_STRUCT pTargetPkt ++ ++) ++{ ++ _rtw_memset((PVOID)pTargetPkt->data, 0xFF, sizeof(u8)*8); ++ pTargetPkt->offset = offset; ++ pTargetPkt->word_en= word_en; ++ efuse_WordEnableDataRead(word_en, pData, pTargetPkt->data); ++ pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en); ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseConstructPGPkt(), targetPkt, offset=%d, word_en=0x%x, word_cnts=%d\n", pTargetPkt->offset, pTargetPkt->word_en, pTargetPkt->word_cnts)); ++} ++ ++static BOOLEAN ++hal_EfuseCheckIfDatafollowed( ++ IN PADAPTER pAdapter, ++ IN u8 word_cnts, ++ IN u16 startAddr, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ BOOLEAN bRet=_FALSE; ++ u8 i, efuse_data; ++ ++ for(i=0; i<(word_cnts*2) ; i++) ++ { ++ if(efuse_OneByteRead(pAdapter, (startAddr+i) ,&efuse_data, bPseudoTest)&&(efuse_data != 0xFF)) ++ bRet = _TRUE; ++ } ++ ++ return bRet; ++} ++ ++static BOOLEAN ++wordEnMatched( ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN PPGPKT_STRUCT pCurPkt, ++ IN u8 *pWden ++) ++{ ++ u8 match_word_en = 0x0F; // default all words are disabled ++ u8 i; ++ ++ // check if the same words are enabled both target and current PG packet ++ if( ((pTargetPkt->word_en & BIT0) == 0) && ++ ((pCurPkt->word_en & BIT0) == 0) ) ++ { ++ match_word_en &= ~BIT0; // enable word 0 ++ } ++ if( ((pTargetPkt->word_en & BIT1) == 0) && ++ ((pCurPkt->word_en & BIT1) == 0) ) ++ { ++ match_word_en &= ~BIT1; // enable word 1 ++ } ++ if( ((pTargetPkt->word_en & BIT2) == 0) && ++ ((pCurPkt->word_en & BIT2) == 0) ) ++ { ++ match_word_en &= ~BIT2; // enable word 2 ++ } ++ if( ((pTargetPkt->word_en & BIT3) == 0) && ++ ((pCurPkt->word_en & BIT3) == 0) ) ++ { ++ match_word_en &= ~BIT3; // enable word 3 ++ } ++ ++ *pWden = match_word_en; ++ ++ if(match_word_en != 0xf) ++ return _TRUE; ++ else ++ return _FALSE; ++} ++ ++static BOOLEAN ++hal_EfusePartialWriteCheck( ++ IN PADAPTER pAdapter, ++ IN u8 efuseType, ++ IN u16 *pAddr, ++ IN PPGPKT_STRUCT pTargetPkt, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ BOOLEAN bRet=_FALSE; ++ u8 i, efuse_data=0, cur_header=0; ++ u8 new_wden=0, matched_wden=0, badworden=0; ++ u16 startAddr=0, efuse_max_available_len=0, efuse_max=0; ++ PGPKT_STRUCT curPkt; ++ ++ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (PVOID)&efuse_max_available_len, bPseudoTest); ++ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&efuse_max, bPseudoTest); ++ ++ if(efuseType == EFUSE_WIFI) ++ { ++ if(bPseudoTest) ++ { ++ startAddr = (u16)(fakeEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); ++ } ++ else ++ { ++ rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&startAddr); ++ startAddr%=EFUSE_REAL_CONTENT_LEN; ++ } ++ } ++ else ++ { ++ if(bPseudoTest) ++ { ++ startAddr = (u16)(fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); ++ } ++ else ++ { ++ startAddr = (u16)(BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN); ++ } ++ } ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePartialWriteCheck(), startAddr=%d\n", startAddr)); ++ ++ while(1) ++ { ++ if(startAddr >= efuse_max_available_len) ++ { ++ bRet = _FALSE; ++ break; ++ } ++ ++ if(efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest) && (efuse_data!=0xFF)) ++ { ++ if(EXT_HEADER(efuse_data)) ++ { ++ cur_header = efuse_data; ++ startAddr++; ++ efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest); ++ if(ALL_WORDS_DISABLED(efuse_data)) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Error condition, all words disabled")); ++ bRet = _FALSE; ++ break; ++ } ++ else ++ { ++ curPkt.offset = ((cur_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1); ++ curPkt.word_en = efuse_data & 0x0F; ++ } ++ } ++ else ++ { ++ cur_header = efuse_data; ++ curPkt.offset = (cur_header>>4) & 0x0F; ++ curPkt.word_en = cur_header & 0x0F; ++ } ++ ++ curPkt.word_cnts = Efuse_CalculateWordCnts(curPkt.word_en); ++ // if same header is found but no data followed ++ // write some part of data followed by the header. ++ if( (curPkt.offset == pTargetPkt->offset) && ++ (!hal_EfuseCheckIfDatafollowed(pAdapter, curPkt.word_cnts, startAddr+1, bPseudoTest)) && ++ wordEnMatched(pTargetPkt, &curPkt, &matched_wden) ) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Need to partial write data by the previous wrote header\n")); ++ // Here to write partial data ++ badworden = Efuse_WordEnableDataWrite(pAdapter, startAddr+1, matched_wden, pTargetPkt->data, bPseudoTest); ++ if(badworden != 0x0F) ++ { ++ u32 PgWriteSuccess=0; ++ // if write fail on some words, write these bad words again ++ if(efuseType == EFUSE_WIFI) ++ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); ++ else ++ PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest); ++ ++ if(!PgWriteSuccess) ++ { ++ bRet = _FALSE; // write fail, return ++ break; ++ } ++ } ++ // partial write ok, update the target packet for later use ++ for(i=0; i<4; i++) ++ { ++ if((matched_wden & (0x1<word_en |= (0x1<word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en); ++ } ++ // read from next header ++ startAddr = startAddr + (curPkt.word_cnts*2) +1; ++ } ++ else ++ { ++ // not used header, 0xff ++ *pAddr = startAddr; ++ //RTPRINT(FEEPROM, EFUSE_PG, ("Started from unused header offset=%d\n", startAddr)); ++ bRet = _TRUE; ++ break; ++ } ++ } ++ return bRet; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWrite_BT( ++ IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *pData, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ PGPKT_STRUCT targetPkt; ++ u16 startAddr=0; ++ u8 efuseType=EFUSE_BT; ++ ++ if(!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest)) ++ return _FALSE; ++ ++ hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt); ++ ++ if(!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ if(!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ if(!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ return _TRUE; ++} ++ ++static BOOLEAN ++hal_EfusePgPacketWrite_8723( ++ IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *pData, ++ IN BOOLEAN bPseudoTest ++ ) ++{ ++ PGPKT_STRUCT targetPkt; ++ u16 startAddr=0; ++ u8 efuseType=EFUSE_WIFI; ++ ++ if(!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest)) ++ return _FALSE; ++ ++ hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt); ++ ++ if(!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ if(!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ if(!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest)) ++ return _FALSE; ++ ++ return _TRUE; ++} ++ ++static int ++hal_EfusePgPacketWrite_8192C(IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ u8 WriteState = PG_STATE_HEADER; ++ ++ int bContinual = _TRUE,bDataEmpty=_TRUE, bResult = _TRUE; ++ u16 efuse_addr = 0; ++ u8 efuse_data; ++ ++ u8 pg_header = 0; ++ ++ u8 tmp_word_cnts=0,target_word_cnts=0; ++ u8 tmp_header,match_word_en,tmp_word_en; ++ ++ PGPKT_STRUCT target_pkt; ++ PGPKT_STRUCT tmp_pkt; ++ ++ u8 originaldata[sizeof(u8)*8]; ++ u8 tmpindex = 0,badworden = 0x0F; ++ ++ static int repeat_times = 0; ++ u8 efuseType=EFUSE_WIFI; ++ ++ // ++ // Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. ++ // So we have to prevent unexpected data string connection, which will cause ++ // incorrect data auto-load from HW. The total size is equal or smaller than 498bytes ++ // (i.e., offset 0~497, and dummy 1bytes) expected after CP test. ++ // 2009.02.19. ++ // ++ if( Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES)) ++ { ++ //RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWrite_8192C(), over size\n")); ++ return _FALSE; ++ } ++ ++ // Init the 8 bytes content as 0xff ++ target_pkt.offset = offset; ++ target_pkt.word_en= word_en; ++ ++ _rtw_memset((PVOID)target_pkt.data, 0xFF, sizeof(u8)*8); ++ ++ efuse_WordEnableDataRead(word_en,data,target_pkt.data); ++ target_word_cnts = Efuse_CalculateWordCnts(target_pkt.word_en); ++ ++ //efuse_reg_ctrl(pAdapter,_TRUE);//power on ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE Power ON\n")); ++ ++ // ++ // Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. ++ // So we have to prevent unexpected data string connection, which will cause ++ // incorrect data auto-load from HW. Dummy 1bytes is additional. ++ // 2009.02.19. ++ // ++ while( bContinual && (efuse_addr < (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES)) ) ++ { ++ ++ if(WriteState==PG_STATE_HEADER) ++ { ++ bDataEmpty=_TRUE; ++ badworden = 0x0F; ++ //************ so ******************* ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER\n")); ++ if ( efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) && ++ (efuse_data!=0xFF)) ++ { ++ tmp_header = efuse_data; ++ ++ tmp_pkt.offset = (tmp_header>>4) & 0x0F; ++ tmp_pkt.word_en = tmp_header & 0x0F; ++ tmp_word_cnts = Efuse_CalculateWordCnts(tmp_pkt.word_en); ++ ++ //************ so-1 ******************* ++ if(tmp_pkt.offset != target_pkt.offset) ++ { ++ efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState = PG_STATE_HEADER; ++ #endif ++ } ++ else ++ { ++ //************ so-2 ******************* ++ for(tmpindex=0 ; tmpindex<(tmp_word_cnts*2) ; tmpindex++) ++ { ++ if(efuse_OneByteRead(pAdapter, (efuse_addr+1+tmpindex) ,&efuse_data, bPseudoTest)&&(efuse_data != 0xFF)){ ++ bDataEmpty = _FALSE; ++ } ++ } ++ //************ so-2-1 ******************* ++ if(bDataEmpty == _FALSE) ++ { ++ efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState=PG_STATE_HEADER; ++ #endif ++ } ++ else ++ {//************ so-2-2 ******************* ++ match_word_en = 0x0F; ++ if( !( (target_pkt.word_en&BIT0)|(tmp_pkt.word_en&BIT0) )) ++ { ++ match_word_en &= (~BIT0); ++ } ++ if( !( (target_pkt.word_en&BIT1)|(tmp_pkt.word_en&BIT1) )) ++ { ++ match_word_en &= (~BIT1); ++ } ++ if( !( (target_pkt.word_en&BIT2)|(tmp_pkt.word_en&BIT2) )) ++ { ++ match_word_en &= (~BIT2); ++ } ++ if( !( (target_pkt.word_en&BIT3)|(tmp_pkt.word_en&BIT3) )) ++ { ++ match_word_en &= (~BIT3); ++ } ++ ++ //************ so-2-2-A ******************* ++ if((match_word_en&0x0F)!=0x0F) ++ { ++ badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1, tmp_pkt.word_en ,target_pkt.data, bPseudoTest); ++ ++ //************ so-2-2-A-1 ******************* ++ //############################ ++ if(0x0F != (badworden&0x0F)) ++ { ++ u8 reorg_offset = offset; ++ u8 reorg_worden=badworden; ++ Efuse_PgPacketWrite(pAdapter,reorg_offset,reorg_worden,originaldata, bPseudoTest); ++ } ++ //############################ ++ ++ tmp_word_en = 0x0F; ++ if( (target_pkt.word_en&BIT0)^(match_word_en&BIT0) ) ++ { ++ tmp_word_en &= (~BIT0); ++ } ++ if( (target_pkt.word_en&BIT1)^(match_word_en&BIT1) ) ++ { ++ tmp_word_en &= (~BIT1); ++ } ++ if( (target_pkt.word_en&BIT2)^(match_word_en&BIT2) ) ++ { ++ tmp_word_en &= (~BIT2); ++ } ++ if( (target_pkt.word_en&BIT3)^(match_word_en&BIT3) ) ++ { ++ tmp_word_en &=(~BIT3); ++ } ++ ++ //************ so-2-2-A-2 ******************* ++ if((tmp_word_en&0x0F)!=0x0F){ ++ //reorganize other pg packet ++ //efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr ++ efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest); ++ //=========================== ++ target_pkt.offset = offset; ++ target_pkt.word_en= tmp_word_en; ++ //=========================== ++ }else{ ++ bContinual = _FALSE; ++ } ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState=PG_STATE_HEADER; ++ repeat_times++; ++ if(repeat_times>EFUSE_REPEAT_THRESHOLD_){ ++ bContinual = _FALSE; ++ bResult = _FALSE; ++ } ++ #endif ++ } ++ else{//************ so-2-2-B ******************* ++ //reorganize other pg packet ++ efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr ++ //=========================== ++ target_pkt.offset = offset; ++ target_pkt.word_en= target_pkt.word_en; ++ //=========================== ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState=PG_STATE_HEADER; ++ #endif ++ } ++ } ++ } ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-1\n")); ++ } ++ else //************ s1: header == oxff ******************* ++ { ++ pg_header = ((target_pkt.offset << 4)&0xf0) |target_pkt.word_en; ++ ++ efuse_OneByteWrite(pAdapter,efuse_addr, pg_header, bPseudoTest); ++ efuse_OneByteRead(pAdapter,efuse_addr, &tmp_header, bPseudoTest); ++ ++ if(tmp_header == pg_header) ++ { //************ s1-1******************* ++ WriteState = PG_STATE_DATA; ++ } ++ #if (EFUSE_ERROE_HANDLE == 1) ++ else if(tmp_header == 0xFF){//************ s1-3: if Write or read func doesn't work ******************* ++ //efuse_addr doesn't change ++ WriteState = PG_STATE_HEADER; ++ repeat_times++; ++ if(repeat_times>EFUSE_REPEAT_THRESHOLD_){ ++ bContinual = _FALSE; ++ bResult = _FALSE; ++ } ++ } ++ #endif ++ else ++ {//************ s1-2 : fixed the header procedure ******************* ++ tmp_pkt.offset = (tmp_header>>4) & 0x0F; ++ tmp_pkt.word_en= tmp_header & 0x0F; ++ tmp_word_cnts = Efuse_CalculateWordCnts(tmp_pkt.word_en); ++ ++ //************ s1-2-A :cover the exist data ******************* ++ //memset(originaldata,0xff,sizeof(UINT8)*8); ++ _rtw_memset((PVOID)originaldata, 0xff, sizeof(u8)*8); ++ ++ if(Efuse_PgPacketRead( pAdapter, tmp_pkt.offset,originaldata, bPseudoTest)) ++ { //check if data exist ++ //efuse_reg_ctrl(pAdapter,_TRUE);//power on ++ badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1,tmp_pkt.word_en,originaldata, bPseudoTest); ++ //############################ ++ if(0x0F != (badworden&0x0F)) ++ { ++ u8 reorg_offset = tmp_pkt.offset; ++ u8 reorg_worden=badworden; ++ Efuse_PgPacketWrite(pAdapter,reorg_offset,reorg_worden,originaldata, bPseudoTest); ++ efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest); ++ } ++ //############################ ++ else{ ++ efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet ++ } ++ } ++ //************ s1-2-B: wrong address******************* ++ else ++ { ++ efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet ++ } ++ ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState=PG_STATE_HEADER; ++ repeat_times++; ++ if(repeat_times>EFUSE_REPEAT_THRESHOLD_){ ++ bContinual = _FALSE; ++ bResult = _FALSE; ++ } ++ #endif ++ ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-2\n")); ++ } ++ ++ } ++ ++ } ++ //write data state ++ else if(WriteState==PG_STATE_DATA) ++ { //************ s1-1 ******************* ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_DATA\n")); ++ badworden = 0x0f; ++ badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1,target_pkt.word_en,target_pkt.data, bPseudoTest); ++ if((badworden&0x0F)==0x0F) ++ { //************ s1-1-A ******************* ++ bContinual = _FALSE; ++ } ++ else ++ {//reorganize other pg packet //************ s1-1-B ******************* ++ efuse_addr = efuse_addr + (2*target_word_cnts) +1;//next pg packet addr ++ ++ //=========================== ++ target_pkt.offset = offset; ++ target_pkt.word_en= badworden; ++ target_word_cnts = Efuse_CalculateWordCnts(target_pkt.word_en); ++ //=========================== ++ #if (EFUSE_ERROE_HANDLE == 1) ++ WriteState=PG_STATE_HEADER; ++ repeat_times++; ++ if(repeat_times>EFUSE_REPEAT_THRESHOLD_){ ++ bContinual = _FALSE; ++ bResult = _FALSE; ++ } ++ #endif ++ //RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-3\n")); ++ } ++ } ++ } ++ ++ if(efuse_addr >= (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES)) ++ { ++ //RT_TRACE(COMP_EFUSE, DBG_LOUD, ("hal_EfusePgPacketWrite_8192C(): efuse_addr(%#x) Out of size!!\n", efuse_addr)); ++ } ++ //efuse_reg_ctrl(pAdapter,_FALSE);//power off ++ ++ return _TRUE; ++} ++ ++static int ++Hal_EfusePgPacketWrite_Pseudo(IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret; ++ ++ ret = hal_EfusePgPacketWrite_8723(pAdapter, offset, word_en, data, bPseudoTest); ++ ++ return ret; ++} ++ ++static int ++Hal_EfusePgPacketWrite(IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret=0; ++ ++ if(IS_HARDWARE_TYPE_8192C(pAdapter)) ++ { ++ ret = hal_EfusePgPacketWrite_8192C(pAdapter, offset, word_en, data, bPseudoTest); ++ } ++ else if(IS_HARDWARE_TYPE_8723A(pAdapter)) ++ { ++ ret = hal_EfusePgPacketWrite_8723(pAdapter, offset, word_en, data, bPseudoTest); ++ } ++ ++ return ret; ++} ++ ++static int ++rtl8192c_Efuse_PgPacketWrite(IN PADAPTER pAdapter, ++ IN u8 offset, ++ IN u8 word_en, ++ IN u8 *data, ++ IN BOOLEAN bPseudoTest) ++{ ++ int ret; ++ ++ if(bPseudoTest) ++ { ++ ret = Hal_EfusePgPacketWrite_Pseudo(pAdapter, offset, word_en, data, bPseudoTest); ++ } ++ else ++ { ++ ret = Hal_EfusePgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest); ++ } ++ return ret; ++} ++ ++VOID ++rtl8192c_EfuseParseIDCode( ++ IN PADAPTER pAdapter, ++ IN u8 *hwinfo ++ ) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u16 i,EEPROMId; ++ ++ // Checl 0x8129 again for making sure autoload status!! ++ EEPROMId = *((u16 *)&hwinfo[0]); ++ if( le16_to_cpu(EEPROMId) != RTL_EEPROM_ID) ++ { ++ DBG_8192C("EEPROM ID(%#x) is invalid!!\n", EEPROMId); ++ pEEPROM->bautoload_fail_flag = _TRUE; ++ } ++ else ++ { ++ pEEPROM->bautoload_fail_flag = _FALSE; ++ } ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM ID = 0x%4x\n", EEPROMId)); ++} ++ ++void rtl8192c_read_chip_version(PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ pHalData->VersionID = rtl8192c_ReadChipVersion(pAdapter); ++} ++ ++void hal_notch_filter_8192c(_adapter *adapter, bool enable) ++{ ++ if (enable) { ++ DBG_871X("Enable notch filter\n"); ++ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1); ++ } else { ++ DBG_871X("Disable notch filter\n"); ++ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1); ++ } ++} ++ ++void hal_reset_security_engine_8192c(_adapter * adapter) ++{ ++ rtw_write8(adapter, 0x522, 0xFF); ++ rtw_write8(adapter, 0x21, 0x35); ++ rtw_usleep_os(300); ++ rtw_write8(adapter, 0x101, rtw_read8(adapter,0x101)&~0x02); ++ rtw_write8(adapter, 0x101, rtw_read8(adapter,0x101)|0x02); ++ rtw_write8(adapter, 0x21, 0x55); ++ rtw_write8(adapter, 0x522, 0x00); ++} ++ ++s32 c2h_id_filter_ccx_8192c(u8 id) ++{ ++ s32 ret = _FALSE; ++ if (id == C2H_CCX_TX_RPT) ++ ret = _TRUE; ++ ++ return ret; ++} ++ ++static s32 c2h_handler_8192c(_adapter *padapter, struct c2h_evt_hdr *c2h_evt) ++{ ++ s32 ret = _SUCCESS; ++ u8 i = 0; ++ ++ if (c2h_evt == NULL) { ++ DBG_8192C("%s c2h_evt is NULL\n",__FUNCTION__); ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ switch (c2h_evt->id) { ++ case C2H_CCX_TX_RPT: ++ handle_txrpt_ccx_8192c(padapter, c2h_evt->payload); ++ break; ++ default: ++ ret = _FAIL; ++ break; ++ } ++ ++exit: ++ return ret; ++} ++ ++void rtl8192c_set_hal_ops(struct hal_ops *pHalFunc) ++{ ++ pHalFunc->free_hal_data = &rtl8192c_free_hal_data; ++ ++ pHalFunc->dm_init = &rtl8192c_init_dm_priv; ++ pHalFunc->dm_deinit = &rtl8192c_deinit_dm_priv; ++ pHalFunc->read_chip_version = &rtl8192c_read_chip_version; ++ ++ pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C; ++ pHalFunc->set_channel_handler = &PHY_SwChnl8192C; ++ ++ pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog; ++ ++ pHalFunc->Add_RateATid = &rtl8192c_Add_RateATid; ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ pHalFunc->AntDivBeforeLinkHandler = &SwAntDivBeforeLink8192C; ++ pHalFunc->AntDivCompareHandler = &SwAntDivCompare8192C; ++#endif ++ ++ pHalFunc->read_bbreg = &rtl8192c_PHY_QueryBBReg; ++ pHalFunc->write_bbreg = &rtl8192c_PHY_SetBBReg; ++ pHalFunc->read_rfreg = &rtl8192c_PHY_QueryRFReg; ++ pHalFunc->write_rfreg = &rtl8192c_PHY_SetRFReg; ++ ++ //Efuse related function ++ pHalFunc->EfusePowerSwitch = &rtl8192c_EfusePowerSwitch; ++ pHalFunc->ReadEFuse = &rtl8192c_ReadEFuse; ++ pHalFunc->EFUSEGetEfuseDefinition = &rtl8192c_EFUSE_GetEfuseDefinition; ++ pHalFunc->EfuseGetCurrentSize = &rtl8192c_EfuseGetCurrentSize; ++ pHalFunc->Efuse_PgPacketRead = &rtl8192c_Efuse_PgPacketRead; ++ pHalFunc->Efuse_PgPacketWrite = &rtl8192c_Efuse_PgPacketWrite; ++ pHalFunc->Efuse_WordEnableDataWrite = &rtl8192c_Efuse_WordEnableDataWrite; ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++ pHalFunc->sreset_init_value = &sreset_init_value; ++ pHalFunc->sreset_reset_value = &sreset_reset_value; ++ pHalFunc->silentreset = &sreset_reset; ++ pHalFunc->sreset_xmit_status_check = &rtl8192c_sreset_xmit_status_check; ++ pHalFunc->sreset_linked_status_check = &rtl8192c_sreset_linked_status_check; ++ pHalFunc->sreset_get_wifi_status = &sreset_get_wifi_status; ++ pHalFunc->sreset_inprogress= &sreset_inprogress; ++#endif ++ ++#ifdef CONFIG_IOL ++ pHalFunc->IOL_exec_cmds_sync = &rtl8192c_IOL_exec_cmds_sync; ++#endif ++ pHalFunc->hal_notch_filter = &hal_notch_filter_8192c; ++ pHalFunc->hal_reset_security_engine = hal_reset_security_engine_8192c; ++ ++ pHalFunc->c2h_handler = c2h_handler_8192c; ++ pHalFunc->c2h_id_filter_ccx = c2h_id_filter_ccx_8192c; ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c +new file mode 100644 +index 000000000000..4d574d335c41 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c +@@ -0,0 +1,1207 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192C_MP_C_ ++#ifdef CONFIG_MP_INCLUDED ++ ++#include ++#include ++ ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++ ++ ++ ++s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ ++ if (!netif_running(padapter->pnetdev)) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n")); ++ return _FAIL; ++ } ++ ++ if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _FALSE) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n")); ++ return _FAIL; ++ } ++ ++ if (enable) ++ pdmpriv->TxPowerTrackControl = _TRUE; ++ else ++ pdmpriv->TxPowerTrackControl = _FALSE; ++ ++ return _SUCCESS; ++} ++ ++void Hal_GetPowerTracking(PADAPTER padapter, u8 *enable) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ ++ *enable = pdmpriv->TxPowerTrackControl; ++} ++ ++static void Hal_disable_dm(PADAPTER padapter) ++{ ++ u8 v8; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ ++ //3 1. disable firmware dynamic mechanism ++ // disable Power Training, Rate Adaptive ++ v8 = rtw_read8(padapter, REG_BCN_CTRL); ++ v8 &= ~EN_BCN_FUNCTION; ++ rtw_write8(padapter, REG_BCN_CTRL, v8); ++ ++ //3 2. disable driver dynamic mechanism ++ // disable Dynamic Initial Gain ++ // disable High Power ++ // disable Power Tracking ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE); ++ ++ // enable APK, LCK and IQK but disable power tracking ++ pdmpriv->TxPowerTrackControl = _FALSE; ++ Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE); ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: mpt_SwitchRfSetting ++ * ++ * Overview: Change RF Setting when we siwthc channel/rate/BW for MP. ++ * ++ * Input: IN PADAPTER pAdapter ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 01/08/2009 MHC Suggestion from SD3 Willis for 92S series. ++ * 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3. ++ * ++ *---------------------------------------------------------------------------*/ ++void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct mp_priv *pmp = &pAdapter->mppriv; ++ u8 ChannelToSw = pmp->channel, eRFPath = RF_PATH_A; ++ u8 ulRateIdx = pmp->rateidx; ++ u8 ulbandwidth = pmp->bandwidth; ++ PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx); ++ BOOLEAN bInteralPA = _FALSE; ++ u32 value = 0; ++ ++#ifdef CONFIG_USB_HCI ++ if (IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ //92CE-VAU (92cu mCard) ++ if( BOARD_MINICARD == pHalData->BoardType) ++ { ++ if (ulRateIdx < MPT_RATE_6M) // CCK rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400); ++ } ++ else //OFDM~MCS rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000); ++ } ++ } ++ else //92CU dongle ++ { ++ if (ulRateIdx < MPT_RATE_6M) // CCK rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400); ++ } ++ else if (ChannelToSw & BIT0) // OFDM rate, odd number channel ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200); ++ } ++ else if (ChannelToSw == 4) // OFDM rate, even number channel ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28200); ++ write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe0004); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x709); ++ rtw_msleep_os(1); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x4B333); ++ } ++ else if(ChannelToSw == 10) // OFDM rate, even number channel ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28000); ++ write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe000A); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x709); ++ rtw_msleep_os(1); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x7B333); ++ } ++ else if(ChannelToSw == 12) // OFDM rate, even number channel ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28200); ++ write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe000C); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x50B); ++ rtw_msleep_os(1); ++ write_rfreg(pAdapter, 0, RF_SYN_G7, 0x4B333); ++ } ++ else ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200); ++ } ++ } ++ } ++ else //88cu ++ { ++ ++ //mcard interface ++ ++ if( BOARD_MINICARD == pHalData->BoardType) ++ { ++ if (ulRateIdx < MPT_RATE_6M) // CCK rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400); ++ } ++ else //OFDM~MCS rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200); ++ } ++ ++ if(ChannelToSw == 6 || ChannelToSw == 8) ++ { ++ write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x22); ++ write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x22); ++ write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, 0x4F); ++ } ++ else ++ { ++ write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x20); ++ write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x20); ++ write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, pMptCtx->backup0xc30); ++ } ++ } ++ else ++ { ++ if (ulRateIdx < MPT_RATE_6M) // CCK rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400); ++ } ++ else if (ChannelToSw & BIT0) // OFDM rate, odd number channel ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200); ++ } ++ else ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000); ++ } ++ } ++ } ++ ++#else //PCI_INTERFACE ++ ++ if (ulRateIdx < MPT_RATE_6M) // CCK rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400); ++ } ++ else //OFDM~MCS rate ++ { ++ write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000); ++ } ++ //88CE ++ if(!IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ if(ChannelToSw == 6 || ChannelToSw == 8) ++ { ++ write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x22); ++ write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x22); ++ write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, 0x4F); ++ } ++ else ++ { ++ write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, pMptCtx->backup0xc50); ++ write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, pMptCtx->backup0xc58); ++ write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, pMptCtx->backup0xc30); ++ } ++ } ++ ++#endif //CONFIG_USB_HCI ++ ++ ++} ++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/ ++ ++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ ++void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14) ++{ ++ u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0; ++ u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12; ++ u8 i; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ ++ // get current cck swing value and check 0xa22 & 0xa23 later to match the table. ++ CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord); ++ ++ if (!bInCH14) ++ { ++ // Readback the current bb cck swing value and compare with the table to ++ // get the current swing index ++ for (i = 0; i < CCK_TABLE_SIZE; i++) ++ { ++ if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) && ++ (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1])) ++ { ++ CCKSwingIndex = i; ++// RT_TRACE(COMP_INIT, DBG_LOUD,("Ch1~13, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n", ++// (rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex)); ++ break; ++ } ++ } ++ ++ //Write 0xa22 0xa23 ++ TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] + ++ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8) ; ++ ++ ++ //Write 0xa24 ~ 0xa27 ++ TempVal2 = 0; ++ TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] + ++ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) + ++ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16 )+ ++ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24); ++ ++ //Write 0xa28 0xa29 ++ TempVal3 = 0; ++ TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] + ++ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8) ; ++ } ++ else ++ { ++ for (i = 0; i < CCK_TABLE_SIZE; i++) ++ { ++ if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) && ++ (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1])) ++ { ++ CCKSwingIndex = i; ++// RT_TRACE(COMP_INIT, DBG_LOUD,("Ch14, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n", ++// (rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex)); ++ break; ++ } ++ } ++ ++ //Write 0xa22 0xa23 ++ TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] + ++ (CCKSwingTable_Ch14[CCKSwingIndex][1]<<8) ; ++ ++ //Write 0xa24 ~ 0xa27 ++ TempVal2 = 0; ++ TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] + ++ (CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) + ++ (CCKSwingTable_Ch14[CCKSwingIndex][4]<<16 )+ ++ (CCKSwingTable_Ch14[CCKSwingIndex][5]<<24); ++ ++ //Write 0xa28 0xa29 ++ TempVal3 = 0; ++ TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] + ++ (CCKSwingTable_Ch14[CCKSwingIndex][7]<<8) ; ++ } ++ ++ write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal); ++ write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2); ++ write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3); ++} ++ ++void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven) ++{ ++ s32 TempCCk; ++ u8 CCK_index, CCK_index_old; ++ u8 Action = 0; //0: no action, 1: even->odd, 2:odd->even ++ u8 TimeOut = 100; ++ s32 i = 0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; ++ ++ ++ if (!IS_92C_SERIAL(pHalData->VersionID)) ++ return; ++#if 0 ++ while(PlatformAtomicExchange(&Adapter->IntrCCKRefCount, TRUE) == TRUE) ++ { ++ PlatformSleepUs(100); ++ TimeOut--; ++ if(TimeOut <= 0) ++ { ++ RTPRINT(FINIT, INIT_TxPower, ++ ("!!!MPT_CCKTxPowerAdjustbyIndex Wait for check CCK gain index too long!!!\n" )); ++ break; ++ } ++ } ++#endif ++ if (beven && !pMptCtx->bMptIndexEven) //odd->even ++ { ++ Action = 2; ++ pMptCtx->bMptIndexEven = _TRUE; ++ } ++ else if (!beven && pMptCtx->bMptIndexEven) //even->odd ++ { ++ Action = 1; ++ pMptCtx->bMptIndexEven = _FALSE; ++ } ++ ++ if (Action != 0) ++ { ++ //Query CCK default setting From 0xa24 ++ TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK; ++ for (i = 0; i < CCK_TABLE_SIZE; i++) ++ { ++ if (pHalData->dmpriv.bCCKinCH14) ++ { ++ if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4) == _TRUE) ++ { ++ CCK_index_old = (u8) i; ++// RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch 14 %d\n", ++// rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14)); ++ break; ++ } ++ } ++ else ++ { ++ if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4) == _TRUE) ++ { ++ CCK_index_old = (u8) i; ++// RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch14 %d\n", ++// rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14)); ++ break; ++ } ++ } ++ } ++ ++ if (Action == 1) ++ CCK_index = CCK_index_old - 1; ++ else ++ CCK_index = CCK_index_old + 1; ++ ++// RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: new CCK_index=0x%x\n", ++// CCK_index)); ++ ++ //Adjust CCK according to gain index ++ if (!pHalData->dmpriv.bCCKinCH14) { ++ rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]); ++ rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]); ++ rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]); ++ rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]); ++ rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]); ++ rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]); ++ rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]); ++ rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]); ++ } else { ++ rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]); ++ rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]); ++ rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]); ++ rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]); ++ rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]); ++ rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]); ++ rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]); ++ rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]); ++ } ++ } ++#if 0 ++ RTPRINT(FINIT, INIT_TxPower, ++ ("MPT_CCKTxPowerAdjustbyIndex 0xa20=%x\n", PlatformEFIORead4Byte(Adapter, 0xa20))); ++ ++ PlatformAtomicExchange(&Adapter->IntrCCKRefCount, FALSE); ++#endif ++} ++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ ++ ++/* ++ * SetChannel ++ * Description ++ * Use H2C command to change channel, ++ * not only modify rf register, but also other setting need to be done. ++ */ ++void Hal_SetChannel(PADAPTER pAdapter) ++{ ++#if 0 ++ struct mp_priv *pmp = &pAdapter->mppriv; ++ ++// SelectChannel(pAdapter, pmp->channel); ++ set_channel_bwmode(pAdapter, pmp->channel, pmp->channel_offset, pmp->bandwidth); ++#else ++ u8 eRFPath; ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct mp_priv *pmp = &pAdapter->mppriv; ++ u8 channel = pmp->channel; ++ u8 bandwidth = pmp->bandwidth; ++ u8 rate = pmp->rateidx; ++ ++ ++ // set RF channel register ++ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) ++ { ++ if(IS_HARDWARE_TYPE_8192D(pAdapter)) ++ _write_rfreg(pAdapter, (RF_RADIO_PATH_E)eRFPath, rRfChannel, 0xFF, channel); ++ else ++ _write_rfreg(pAdapter, eRFPath, rRfChannel, 0x3FF, channel); ++ } ++ Hal_mpt_SwitchRfSetting(pAdapter); ++ ++ SelectChannel(pAdapter, channel); ++ ++ if (pHalData->CurrentChannel == 14 && !pHalData->dmpriv.bCCKinCH14) { ++ pHalData->dmpriv.bCCKinCH14 = _TRUE; ++ Hal_MPT_CCKTxPowerAdjust(pAdapter, pHalData->dmpriv.bCCKinCH14); ++ } ++ else if (pHalData->CurrentChannel != 14 && pHalData->dmpriv.bCCKinCH14) { ++ pHalData->dmpriv.bCCKinCH14 = _FALSE; ++ Hal_MPT_CCKTxPowerAdjust(pAdapter, pHalData->dmpriv.bCCKinCH14); ++ } ++ ++#endif ++} ++ ++/* ++ * Notice ++ * Switch bandwitdth may change center frequency(channel) ++ */ ++void Hal_SetBandwidth(PADAPTER pAdapter) ++{ ++ struct mp_priv *pmp = &pAdapter->mppriv; ++ ++ ++ SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset); ++ Hal_mpt_SwitchRfSetting(pAdapter); ++} ++ ++void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower) ++{ ++ u32 tmpval = 0; ++ ++ ++ // rf-A cck tx power ++ write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]); ++ tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A]; ++ write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); ++ ++ // rf-B cck tx power ++ write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]); ++ tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B]; ++ write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n", ++ TxPower[RF_PATH_A], TxPower[RF_PATH_B])); ++} ++ ++void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower) ++{ ++ u32 TxAGC = 0; ++ u8 tmpval = 0; ++ PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ ++ // HT Tx-rf(A) ++ tmpval = TxPower[RF_PATH_A]; ++ TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; ++ ++ write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC); ++ ++ // HT Tx-rf(B) ++ tmpval = TxPower[RF_PATH_B]; ++ TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; ++ ++ write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC); ++ write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC); ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ++ ("-SetOFDMTxPower: A[0x%02x] B[0x%02x]\n", ++ TxPower[RF_PATH_A], TxPower[RF_PATH_B])); ++} ++ ++void Hal_SetAntennaPathPower(PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u8 TxPowerLevel[MAX_RF_PATH_NUMS]; ++ u8 rfPath; ++ ++ TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx; ++ TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b; ++ ++ switch (pAdapter->mppriv.antenna_tx) ++ { ++ case ANTENNA_A: ++ default: ++ rfPath = RF_PATH_A; ++ break; ++ case ANTENNA_B: ++ rfPath = RF_PATH_B; ++ break; ++ case ANTENNA_C: ++ rfPath = RF_PATH_C; ++ break; ++ } ++ ++ switch (pHalData->rf_chip) ++ { ++ case RF_8225: ++ case RF_8256: ++ case RF_6052: ++ Hal_SetCCKTxPower(pAdapter, TxPowerLevel); ++ if (pAdapter->mppriv.rateidx < MPT_RATE_6M) // CCK rate ++ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); ++ Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++void Hal_SetTxPower(PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u8 TxPower = pAdapter->mppriv.txpoweridx; ++ u8 TxPowerLevel[MAX_RF_PATH_NUMS]; ++ u8 rf, rfPath; ++ ++ for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++) { ++ TxPowerLevel[rf] = TxPower; ++ } ++ ++ switch (pAdapter->mppriv.antenna_tx) ++ { ++ case ANTENNA_A: ++ default: ++ rfPath = RF_PATH_A; ++ break; ++ case ANTENNA_B: ++ rfPath = RF_PATH_B; ++ break; ++ case ANTENNA_C: ++ rfPath = RF_PATH_C; ++ break; ++ } ++ ++ switch (pHalData->rf_chip) ++ { ++ // 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! ++ // We should call normal driver API later!! ++ case RF_8225: ++ case RF_8256: ++ case RF_6052: ++ Hal_SetCCKTxPower(pAdapter, TxPowerLevel); ++ if (pAdapter->mppriv.rateidx < MPT_RATE_6M) // CCK rate ++ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); ++ Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); ++ break; ++ ++ default: ++ break; ++ } ++ ++// SetCCKTxPower(pAdapter, TxPower); ++// SetOFDMTxPower(pAdapter, TxPower); ++} ++ ++void Hal_SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset) ++{ ++ u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D,tmpAGC; ++ ++ TxAGCOffset_B = (ulTxAGCOffset&0x000000ff); ++ TxAGCOffset_C = ((ulTxAGCOffset&0x0000ff00)>>8); ++ TxAGCOffset_D = ((ulTxAGCOffset&0x00ff0000)>>16); ++ ++ tmpAGC = (TxAGCOffset_D<<8 | TxAGCOffset_C<<4 | TxAGCOffset_B); ++ write_bbreg(pAdapter, rFPGA0_TxGainStage, ++ (bXBTxAGC|bXCTxAGC|bXDTxAGC), tmpAGC); ++} ++ ++void Hal_SetDataRate(PADAPTER pAdapter) ++{ ++ Hal_mpt_SwitchRfSetting(pAdapter); ++} ++ ++#if !defined (CONFIG_RTL8192C) && !defined (CONFIG_RTL8192D) ++/*------------------------------Define structure----------------------------*/ ++typedef struct _R_ANTENNA_SELECT_OFDM { ++ u32 r_tx_antenna:4; ++ u32 r_ant_l:4; ++ u32 r_ant_non_ht:4; ++ u32 r_ant_ht1:4; ++ u32 r_ant_ht2:4; ++ u32 r_ant_ht_s1:4; ++ u32 r_ant_non_ht_s1:4; ++ u32 OFDM_TXSC:2; ++ u32 Reserved:2; ++}R_ANTENNA_SELECT_OFDM; ++ ++typedef struct _R_ANTENNA_SELECT_CCK { ++ u8 r_cckrx_enable_2:2; ++ u8 r_cckrx_enable:2; ++ u8 r_ccktx_enable:4; ++}R_ANTENNA_SELECT_CCK; ++#endif ++ ++void Hal_SetAntenna(PADAPTER pAdapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */ ++ R_ANTENNA_SELECT_CCK *p_cck_txrx; ++ ++ u8 r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0; ++ u8 chgTx = 0, chgRx = 0; ++ u32 r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0; ++ ++ ++ p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val; ++ p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val; ++ ++ p_ofdm_tx->r_ant_ht1 = 0x1; ++ p_ofdm_tx->r_ant_ht2 = 0x2; // Second TX RF path is A ++ p_ofdm_tx->r_ant_non_ht = 0x3; // 0x1+0x2=0x3 ++ ++ switch (pAdapter->mppriv.antenna_tx) ++ { ++ case ANTENNA_A: ++ p_ofdm_tx->r_tx_antenna = 0x1; ++ r_ofdm_tx_en_val = 0x1; ++ p_ofdm_tx->r_ant_l = 0x1; ++ p_ofdm_tx->r_ant_ht_s1 = 0x1; ++ p_ofdm_tx->r_ant_non_ht_s1 = 0x1; ++ p_cck_txrx->r_ccktx_enable = 0x8; ++ chgTx = 1; ++ ++ // From SD3 Willis suggestion !!! Set RF A=TX and B as standby ++// if (IS_HARDWARE_TYPE_8192S(pAdapter)) ++ { ++ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); ++ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1); ++ r_ofdm_tx_en_val = 0x3; ++ ++ // Power save ++ //cosa r_ant_select_ofdm_val = 0x11111111; ++ ++ // We need to close RFB by SW control ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1); ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0); ++ } ++ } ++ break; ++ ++ case ANTENNA_B: ++ p_ofdm_tx->r_tx_antenna = 0x2; ++ r_ofdm_tx_en_val = 0x2; ++ p_ofdm_tx->r_ant_l = 0x2; ++ p_ofdm_tx->r_ant_ht_s1 = 0x2; ++ p_ofdm_tx->r_ant_non_ht_s1 = 0x2; ++ p_cck_txrx->r_ccktx_enable = 0x4; ++ chgTx = 1; ++ ++ // From SD3 Willis suggestion !!! Set RF A as standby ++ //if (IS_HARDWARE_TYPE_8192S(pAdapter)) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1); ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); ++// r_ofdm_tx_en_val = 0x3; ++ ++ // Power save ++ //cosa r_ant_select_ofdm_val = 0x22222222; ++ ++ // 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. ++ // 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control ++ if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1); ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); ++// PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); ++ } ++ } ++ break; ++ ++ case ANTENNA_AB: // For 8192S ++ p_ofdm_tx->r_tx_antenna = 0x3; ++ r_ofdm_tx_en_val = 0x3; ++ p_ofdm_tx->r_ant_l = 0x3; ++ p_ofdm_tx->r_ant_ht_s1 = 0x3; ++ p_ofdm_tx->r_ant_non_ht_s1 = 0x3; ++ p_cck_txrx->r_ccktx_enable = 0xC; ++ chgTx = 1; ++ ++ // From SD3 Willis suggestion !!! Set RF B as standby ++ //if (IS_HARDWARE_TYPE_8192S(pAdapter)) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); ++ ++ // Disable Power save ++ //cosa r_ant_select_ofdm_val = 0x3321333; ++#if 0 ++ // 2008/10/31 MH From SD3 Willi's suggestion. We must read RFA 2T table. ++ if ((pHalData->VersionID == VERSION_8192S_ACUT)) // For RTL8192SU A-Cut only, by Roger, 2008.11.07. ++ { ++ mpt_RFConfigFromPreParaArrary(pAdapter, 1, RF_PATH_A); ++ } ++#endif ++ // 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); ++// PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ // ++ // r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D ++ // r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D ++ // r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D ++ // ++ switch (pAdapter->mppriv.antenna_rx) ++ { ++ case ANTENNA_A: ++ r_rx_antenna_ofdm = 0x1; // A ++ p_cck_txrx->r_cckrx_enable = 0x0; // default: A ++ p_cck_txrx->r_cckrx_enable_2 = 0x0; // option: A ++ chgRx = 1; ++ break; ++ ++ case ANTENNA_B: ++ r_rx_antenna_ofdm = 0x2; // B ++ p_cck_txrx->r_cckrx_enable = 0x1; // default: B ++ p_cck_txrx->r_cckrx_enable_2 = 0x1; // option: B ++ chgRx = 1; ++ break; ++ ++ case ANTENNA_AB: ++ r_rx_antenna_ofdm = 0x3; // AB ++ p_cck_txrx->r_cckrx_enable = 0x0; // default:A ++ p_cck_txrx->r_cckrx_enable_2 = 0x1; // option:B ++ chgRx = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ if (chgTx && chgRx) ++ { ++ switch(pHalData->rf_chip) ++ { ++ case RF_8225: ++ case RF_8256: ++ case RF_6052: ++ //r_ant_sel_cck_val = r_ant_select_cck_val; ++ PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); //OFDM Tx ++ PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); //OFDM Tx ++ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); //OFDM Rx ++ PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); //OFDM Rx ++ PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val);//r_ant_sel_cck_val); //CCK TxRx ++ ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n")); ++} ++ ++s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ ++ if (!netif_running(pAdapter->pnetdev)) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n")); ++ return _FAIL; ++ } ++ ++ if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) { ++ RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n")); ++ return _FAIL; ++ } ++ ++ target_ther &= 0xff; ++ if (target_ther < 0x07) ++ target_ther = 0x07; ++ else if (target_ther > 0x1d) ++ target_ther = 0x1d; ++ ++ pHalData->EEPROMThermalMeter = target_ther; ++ ++ return _SUCCESS; ++} ++ ++void Hal_TriggerRFThermalMeter(PADAPTER pAdapter) ++{ ++ ++ write_rfreg(pAdapter, RF_PATH_A, RF_T_METER, 0x60); // 0x24: RF Reg[6:5] ++ ++// RT_TRACE(_module_mp_,_drv_alert_, ("TriggerRFThermalMeter() finished.\n" )); ++} ++ ++u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter) ++{ ++ u32 ThermalValue = 0; ++ ++ ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER, 0x1F); // 0x24: RF Reg[4:0] ++// RT_TRACE(_module_mp_, _drv_alert_, ("ThermalValue = 0x%x\n", ThermalValue)); ++ return (u8)ThermalValue; ++} ++ ++void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value) ++{ ++#if 0 ++ fw_cmd(pAdapter, IOCMD_GET_THERMAL_METER); ++ rtw_msleep_os(1000); ++ fw_cmd_data(pAdapter, value, 1); ++ *value &= 0xFF; ++#else ++ ++ Hal_TriggerRFThermalMeter(pAdapter); ++ rtw_msleep_os(1000); ++ *value = Hal_ReadRFThermalMeter(pAdapter); ++#endif ++} ++ ++void Hal_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ pAdapter->mppriv.MptCtx.bSingleCarrier = bStart; ++ if (bStart)// Start Single Carrier. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test start\n")); ++ // 1. if OFDM block on? ++ if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on ++ ++ { ++ // 2. set CCK test mode off, set to CCK normal mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); ++ // 3. turn on scramble setting ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); ++ } ++ // 4. Turn On Single Carrier Tx and turn off the other test modes. ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++#ifdef CONFIG_RTL8192C ++ // 5. Disable TX power saving at STF & LLTF ++ write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 1); ++#endif ++ } ++ else// Stop Single Carrier. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test stop\n")); ++ ++ // Turn off all test modes. ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++#ifdef CONFIG_RTL8192C ++ // Cancel disable TX power saving at STF&LLTF ++ write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 0); ++#endif ++ //Delay 10 ms //delay_ms(10); ++ rtw_msleep_os(10); ++ ++ //BB Reset ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); ++ } ++} ++ ++ ++void Hal_SetSingleToneTx(PADAPTER pAdapter, u8 bStart) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ BOOLEAN is92C = IS_92C_SERIAL(pHalData->VersionID); ++ ++ u8 rfPath; ++ ++ switch (pAdapter->mppriv.antenna_tx) ++ { ++ case ANTENNA_A: ++ default: ++ rfPath = RF_PATH_A; ++ break; ++ case ANTENNA_B: ++ rfPath = RF_PATH_B; ++ break; ++ case ANTENNA_C: ++ rfPath = RF_PATH_C; ++ break; ++ } ++ ++ pAdapter->mppriv.MptCtx.bSingleTone = bStart; ++ if (bStart)// Start Single Tone. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test start\n")); ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0); ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0); ++ ++ if (is92C) ++ { ++ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01); ++ rtw_usleep_os(100); ++ if (rfPath == RF_PATH_A) ++ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); // PAD all on. ++ else if (rfPath == RF_PATH_B) ++ write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); // PAD all on. ++ } else { ++ write_rfreg(pAdapter, rfPath, 0x21, 0xd4000); ++ rtw_usleep_os(100); ++ } ++ ++ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); // PAD all on. ++ rtw_usleep_os(100); ++ } ++ else// Stop Single Tone. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test stop\n")); ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1); ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1); ++ ++ if (is92C) { ++ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00); ++ rtw_usleep_os(100); ++ write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); // PAD all on. ++ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); // PAD all on. ++ rtw_usleep_os(100); ++ } else { ++ write_rfreg(pAdapter, rfPath, 0x21, 0x54000); ++ rtw_usleep_os(100); ++ ++ write_rfreg(pAdapter, rfPath, 0x00, 0x30000); // PAD all on. ++ rtw_usleep_os(100); ++ } ++ } ++ ++} ++ ++ ++void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart) ++{ ++ pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart; ++ if (bStart) // Start Carrier Suppression. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test start\n")); ++ //if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B) ++ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) ++ { ++ // 1. if CCK block on? ++ if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on ++ ++ //Turn Off All Test Mode ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++ ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); //transmit mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); //turn off scramble setting ++ ++ //Set CCK Tx Test Rate ++ //PHY_SetBBReg(pAdapter, rCCK0_System, bCCKTxRate, pMgntInfo->ForcedDataRate); ++ write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); //Set FTxRate to 1Mbps ++ } ++ } ++ else// Stop Carrier Suppression. ++ { ++ RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test stop\n")); ++ //if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B) ++ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M ) { ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); //normal mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); //turn on scramble setting ++ ++ //BB Reset ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); ++ } ++ } ++ //DbgPrint("\n MPT_ProSetCarrierSupp() is finished. \n"); ++} ++ ++void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart) ++{ ++ u32 cckrate; ++ ++ if (bStart) ++ { ++ RT_TRACE(_module_mp_, _drv_alert_, ++ ("SetCCKContinuousTx: test start\n")); ++ ++ // 1. if CCK block on? ++ if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on ++ ++ //Turn Off All Test Mode ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++ //Set CCK Tx Test Rate ++ #if 0 ++ switch(pAdapter->mppriv.rateidx) ++ { ++ case 2: ++ cckrate = 0; ++ break; ++ case 4: ++ cckrate = 1; ++ break; ++ case 11: ++ cckrate = 2; ++ break; ++ case 22: ++ cckrate = 3; ++ break; ++ default: ++ cckrate = 0; ++ break; ++ } ++ #else ++ cckrate = pAdapter->mppriv.rateidx; ++ #endif ++ write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate); ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); //transmit mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); //turn on scramble setting ++ ++#ifdef CONFIG_RTL8192C ++ // Patch for CCK 11M waveform ++ if (cckrate == MPT_RATE_1M) ++ write_bbreg(pAdapter, 0xA71, BIT(6), bDisable); ++ else ++ write_bbreg(pAdapter, 0xA71, BIT(6), bEnable); ++#endif ++ ++ } ++ else { ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("SetCCKContinuousTx: test stop\n")); ++ ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); //normal mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); //turn on scramble setting ++ ++ //BB Reset ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); ++ } ++ ++ pAdapter->mppriv.MptCtx.bCckContTx = bStart; ++ pAdapter->mppriv.MptCtx.bOfdmContTx = _FALSE; ++}/* mpt_StartCckContTx */ ++ ++void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ if (bStart) { ++ RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n")); ++ // 1. if OFDM block on? ++ if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) ++ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on ++ { ++ ++ // 2. set CCK test mode off, set to CCK normal mode ++ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); ++ ++ // 3. turn on scramble setting ++ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); ++ } ++ // 4. Turn On Continue Tx and turn off the other test modes. ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++ } else { ++ RT_TRACE(_module_mp_,_drv_info_, ("SetOFDMContinuousTx: test stop\n")); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); ++ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); ++ //Delay 10 ms ++ rtw_msleep_os(10); ++ //BB Reset ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); ++ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); ++ } ++ ++ pAdapter->mppriv.MptCtx.bCckContTx = _FALSE; ++ pAdapter->mppriv.MptCtx.bOfdmContTx = bStart; ++}/* mpt_StartOfdmContTx */ ++ ++void Hal_SetContinuousTx(PADAPTER pAdapter, u8 bStart) ++{ ++#if 0 ++ // ADC turn off [bit24-21] adc port0 ~ port1 ++ if (bStart) { ++ write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) & 0xFE1FFFFF); ++ rtw_usleep_os(100); ++ } ++#endif ++ RT_TRACE(_module_mp_, _drv_info_, ++ ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx)); ++ ++ pAdapter->mppriv.MptCtx.bStartContTx = bStart; ++ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) ++ { ++ Hal_SetCCKContinuousTx(pAdapter, bStart); ++ } ++ else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) && ++ (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15)) ++ { ++ Hal_SetOFDMContinuousTx(pAdapter, bStart); ++ } ++#if 0 ++ // ADC turn on [bit24-21] adc port0 ~ port1 ++ if (!bStart) { ++ write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) | 0x01E00000); ++ } ++#endif ++} ++ ++#endif // CONFIG_MP_INCLUDE +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c +new file mode 100644 +index 000000000000..8b19cedede16 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c +@@ -0,0 +1,4840 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/****************************************************************************** ++ ++ Module: rtl8192c_phycfg.c ++ ++ Note: Merge 92SE/SU PHY config as below ++ 1. BB register R/W API ++ 2. RF register R/W API ++ 3. Initial BB/RF/MAC config by reading BB/MAC/RF txt. ++ 3. Power setting API ++ 4. Channel switch API ++ 5. Initial gain switch API. ++ 6. Other BB/MAC/RF API. ++ ++ Function: PHY: Extern function, phy: local function ++ ++ Export: PHY_FunctionName ++ ++ Abbrev: NONE ++ ++ History: ++ Data Who Remark ++ 08/08/2008 MHC 1. Port from 9x series phycfg.c ++ 2. Reorganize code arch and ad description. ++ 3. Collect similar function. ++ 4. Seperate extern/local API. ++ 08/12/2008 MHC We must merge or move USB PHY relative function later. ++ 10/07/2008 MHC Add IQ calibration for PHY.(Only 1T2R mode now!!!) ++ 11/06/2008 MHC Add TX Power index PG file to config in 0xExx register ++ area to map with EEPROM/EFUSE tx pwr index. ++ ++******************************************************************************/ ++#define _HAL_8192C_PHYCFG_C_ ++ ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_IOL ++#include ++#endif ++ ++#include ++ ++ ++/*---------------------------Define Local Constant---------------------------*/ ++/* Channel switch:The size of command tables for switch channel*/ ++#define MAX_PRECMD_CNT 16 ++#define MAX_RFDEPENDCMD_CNT 16 ++#define MAX_POSTCMD_CNT 16 ++ ++#define MAX_DOZE_WAITING_TIMES_9x 64 ++ ++/*---------------------------Define Local Constant---------------------------*/ ++ ++ ++/*------------------------Define global variable-----------------------------*/ ++ ++/*------------------------Define local variable------------------------------*/ ++ ++ ++/*--------------------Define export function prototype-----------------------*/ ++// Please refer to header file ++/*--------------------Define export function prototype-----------------------*/ ++ ++/*----------------------------Function Body----------------------------------*/ ++// ++// 1. BB register R/W API ++// ++ ++/** ++* Function: phy_CalculateBitShift ++* ++* OverView: Get shifted position of the BitMask ++* ++* Input: ++* u4Byte BitMask, ++* ++* Output: none ++* Return: u4Byte Return the shift bit bit position of the mask ++*/ ++static u32 ++phy_CalculateBitShift( ++ u32 BitMask ++ ) ++{ ++ u32 i; ++ ++ for(i=0; i<=31; i++) ++ { ++ if ( ((BitMask>>i) & 0x1 ) == 1) ++ break; ++ } ++ ++ return (i); ++} ++ ++ ++/** ++* Function: PHY_QueryBBReg ++* ++* OverView: Read "sepcific bits" from BB register ++* ++* Input: ++* PADAPTER Adapter, ++* u4Byte RegAddr, //The target address to be readback ++* u4Byte BitMask //The target bit position in the target address ++* //to be readback ++* Output: None ++* Return: u4Byte Data //The readback register value ++* Note: This function is equal to "GetRegSetting" in PHY programming guide ++*/ ++u32 ++rtl8192c_PHY_QueryBBReg( ++ IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask ++ ) ++{ ++ u32 ReturnValue = 0, OriginalValue, BitShift; ++ u16 BBWaitCounter = 0; ++ ++#if (DISABLE_BB_RF == 1) ++ return 0; ++#endif ++ ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx)\n", RegAddr, BitMask)); ++ ++ OriginalValue = rtw_read32(Adapter, RegAddr); ++ BitShift = phy_CalculateBitShift(BitMask); ++ ReturnValue = (OriginalValue & BitMask) >> BitShift; ++ ++ //RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, OriginalValue)); ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx), OriginalValue(%#lx)\n", RegAddr, BitMask, OriginalValue)); ++ ++ return (ReturnValue); ++ ++} ++ ++ ++/** ++* Function: PHY_SetBBReg ++* ++* OverView: Write "Specific bits" to BB register (page 8~) ++* ++* Input: ++* PADAPTER Adapter, ++* u4Byte RegAddr, //The target address to be modified ++* u4Byte BitMask //The target bit position in the target address ++* //to be modified ++* u4Byte Data //The new register value in the target bit position ++* //of the target address ++* ++* Output: None ++* Return: None ++* Note: This function is equal to "PutRegSetting" in PHY programming guide ++*/ ++ ++VOID ++rtl8192c_PHY_SetBBReg( ++ IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ //u16 BBWaitCounter = 0; ++ u32 OriginalValue, BitShift; ++ ++#if (DISABLE_BB_RF == 1) ++ return; ++#endif ++ ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data)); ++ ++ if(BitMask!= bMaskDWord){//if not "double word" write ++ OriginalValue = rtw_read32(Adapter, RegAddr); ++ BitShift = phy_CalculateBitShift(BitMask); ++ Data = ((OriginalValue & (~BitMask)) | ((Data << BitShift) & BitMask)); ++ } ++ ++ rtw_write32(Adapter, RegAddr, Data); ++ ++ //RTPRINT(FPHY, PHY_BBW, ("BBW MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, Data)); ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data)); ++ ++} ++ ++ ++// ++// 2. RF register R/W API ++// ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_FwRFSerialRead() ++ * ++ * Overview: We support firmware to execute RF-R/W. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 01/21/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++static u32 ++phy_FwRFSerialRead( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset ) ++{ ++ u32 retValue = 0; ++ //RT_ASSERT(FALSE,("deprecate!\n")); ++ return (retValue); ++ ++} /* phy_FwRFSerialRead */ ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_FwRFSerialWrite() ++ * ++ * Overview: We support firmware to execute RF-R/W. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 01/21/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++static VOID ++phy_FwRFSerialWrite( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset, ++ IN u32 Data ) ++{ ++ //RT_ASSERT(FALSE,("deprecate!\n")); ++} ++ ++ ++/** ++* Function: phy_RFSerialRead ++* ++* OverView: Read regster from RF chips ++* ++* Input: ++* PADAPTER Adapter, ++* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D ++* u4Byte Offset, //The target address to be read ++* ++* Output: None ++* Return: u4Byte reback value ++* Note: Threre are three types of serial operations: ++* 1. Software serial write ++* 2. Hardware LSSI-Low Speed Serial Interface ++* 3. Hardware HSSI-High speed ++* serial write. Driver need to implement (1) and (2). ++* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() ++*/ ++static u32 ++phy_RFSerialRead( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset ++ ) ++{ ++ u32 retValue = 0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; ++ u32 NewOffset; ++ u32 tmplong,tmplong2; ++ u8 RfPiEnable=0; ++#if 0 ++ if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs ++ return retValue; ++ if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs ++ return retValue; ++#endif ++ // ++ // Make sure RF register offset is correct ++ // ++ Offset &= 0x3f; ++ ++ // ++ // Switch page for 8256 RF IC ++ // ++ NewOffset = Offset; ++ ++ // 2009/06/17 MH We can not execute IO for power save or other accident mode. ++ //if(RT_CANNOT_IO(Adapter)) ++ //{ ++ // RTPRINT(FPHY, PHY_RFR, ("phy_RFSerialRead return all one\n")); ++ // return 0xFFFFFFFF; ++ //} ++ ++ // For 92S LSSI Read RFLSSIRead ++ // For RF A/B write 0x824/82c(does not work in the future) ++ // We must use 0x824 for RF A and B to execute read trigger ++ tmplong = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord); ++ if(eRFPath == RF_PATH_A) ++ tmplong2 = tmplong; ++ else ++ tmplong2 = PHY_QueryBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord); ++ ++ tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; //T65 RF ++ ++ PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge)); ++ rtw_udelay_os(10);// PlatformStallExecution(10); ++ ++ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2); ++ rtw_udelay_os(100);//PlatformStallExecution(100); ++ ++ PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge); ++ rtw_udelay_os(10);//PlatformStallExecution(10); ++ ++ if(eRFPath == RF_PATH_A) ++ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8); ++ else if(eRFPath == RF_PATH_B) ++ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8); ++ ++ if(RfPiEnable) ++ { // Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF ++ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData); ++ //DBG_8192C("Readback from RF-PI : 0x%x\n", retValue); ++ } ++ else ++ { //Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF ++ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); ++ //DBG_8192C("Readback from RF-SI : 0x%x\n", retValue); ++ } ++ //DBG_8192C("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue); ++ ++ return retValue; ++ ++} ++ ++ ++ ++/** ++* Function: phy_RFSerialWrite ++* ++* OverView: Write data to RF register (page 8~) ++* ++* Input: ++* PADAPTER Adapter, ++* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D ++* u4Byte Offset, //The target address to be read ++* u4Byte Data //The new register Data in the target bit position ++* //of the target to be read ++* ++* Output: None ++* Return: None ++* Note: Threre are three types of serial operations: ++* 1. Software serial write ++* 2. Hardware LSSI-Low Speed Serial Interface ++* 3. Hardware HSSI-High speed ++* serial write. Driver need to implement (1) and (2). ++* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() ++ * ++ * Note: For RF8256 only ++ * The total count of RTL8256(Zebra4) register is around 36 bit it only employs ++ * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) ++ * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration ++ * programming guide" for more details. ++ * Thus, we define a sub-finction for RTL8526 register address conversion ++ * =========================================================== ++ * Register Mode RegCTL[1] RegCTL[0] Note ++ * (Reg00[12]) (Reg00[10]) ++ * =========================================================== ++ * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) ++ * ------------------------------------------------------------------ ++ * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) ++ * ------------------------------------------------------------------ ++ * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) ++ * ------------------------------------------------------------------ ++ * ++ * 2008/09/02 MH Add 92S RF definition ++ * ++ * ++ * ++*/ ++static VOID ++phy_RFSerialWrite( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset, ++ IN u32 Data ++ ) ++{ ++ u32 DataAndAddr = 0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ BB_REGISTER_DEFINITION_T *pPhyReg = &pHalData->PHYRegDef[eRFPath]; ++ u32 NewOffset; ++ ++#if 0 ++ // We should check valid regs for RF_6052 case. ++ if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs ++ return; ++ if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs ++ return; ++#endif ++ ++ // 2009/06/17 MH We can not execute IO for power save or other accident mode. ++ //if(RT_CANNOT_IO(Adapter)) ++ //{ ++ // RTPRINT(FPHY, PHY_RFW, ("phy_RFSerialWrite stop\n")); ++ // return; ++ //} ++ ++ Offset &= 0x3f; ++ ++ // ++ // Shadow Update ++ // ++ //PHY_RFShadowWrite(Adapter, eRFPath, Offset, Data); ++ ++ // ++ // Switch page for 8256 RF IC ++ // ++ NewOffset = Offset; ++ ++ // ++ // Put write addr in [5:0] and write data in [31:16] ++ // ++ //DataAndAddr = (Data<<16) | (NewOffset&0x3f); ++ DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; // T65 RF ++ ++ // ++ // Write Operation ++ // ++ PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); ++ //RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%lx]=0x%lx\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr)); ++ ++} ++ ++ ++/** ++* Function: PHY_QueryRFReg ++* ++* OverView: Query "Specific bits" to RF register (page 8~) ++* ++* Input: ++* PADAPTER Adapter, ++* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D ++* u4Byte RegAddr, //The target address to be read ++* u4Byte BitMask //The target bit position in the target address ++* //to be read ++* ++* Output: None ++* Return: u4Byte Readback value ++* Note: This function is equal to "GetRFRegSetting" in PHY programming guide ++*/ ++u32 ++rtl8192c_PHY_QueryRFReg( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask ++ ) ++{ ++ u32 Original_Value, Readback_Value, BitShift; ++ //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ //u8 RFWaitCounter = 0; ++ //_irqL irqL; ++ ++#if (DISABLE_BB_RF == 1) ++ return 0; ++#endif ++ ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x), BitMask(%#lx)\n", RegAddr, eRFPath,BitMask)); ++ ++#ifdef CONFIG_USB_HCI ++ //PlatformAcquireMutex(&pHalData->mxRFOperate); ++#else ++ //_enter_critical(&pHalData->rf_lock, &irqL); ++#endif ++ ++ ++ Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); ++ ++ BitShift = phy_CalculateBitShift(BitMask); ++ Readback_Value = (Original_Value & BitMask) >> BitShift; ++ ++#ifdef CONFIG_USB_HCI ++ //PlatformReleaseMutex(&pHalData->mxRFOperate); ++#else ++ //_exit_critical(&pHalData->rf_lock, &irqL); ++#endif ++ ++ ++ //RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%lx Addr[0x%lx]=0x%lx\n", eRFPath, BitMask, RegAddr, Original_Value));//BitMask(%#lx),BitMask, ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x), Original_Value(%#lx)\n", ++ // RegAddr, eRFPath, Original_Value)); ++ ++ return (Readback_Value); ++} ++ ++/** ++* Function: PHY_SetRFReg ++* ++* OverView: Write "Specific bits" to RF register (page 8~) ++* ++* Input: ++* PADAPTER Adapter, ++* RF_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D ++* u4Byte RegAddr, //The target address to be modified ++* u4Byte BitMask //The target bit position in the target address ++* //to be modified ++* u4Byte Data //The new register Data in the target bit position ++* //of the target address ++* ++* Output: None ++* Return: None ++* Note: This function is equal to "PutRFRegSetting" in PHY programming guide ++*/ ++VOID ++rtl8192c_PHY_SetRFReg( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ++ ) ++{ ++ ++ //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ //u1Byte RFWaitCounter = 0; ++ u32 Original_Value, BitShift; ++ //_irqL irqL; ++ ++#if (DISABLE_BB_RF == 1) ++ return; ++#endif ++ ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", ++ // RegAddr, BitMask, Data, eRFPath)); ++ //RTPRINT(FINIT, INIT_RF, ("PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", ++ // RegAddr, BitMask, Data, eRFPath)); ++ ++ ++#ifdef CONFIG_USB_HCI ++ //PlatformAcquireMutex(&pHalData->mxRFOperate); ++#else ++ //_enter_critical(&pHalData->rf_lock, &irqL); ++#endif ++ ++ ++ // RF data is 12 bits only ++ if (BitMask != bRFRegOffsetMask) ++ { ++ Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr); ++ BitShift = phy_CalculateBitShift(BitMask); ++ Data = ((Original_Value & (~BitMask)) | (Data<< BitShift)); ++ } ++ ++ phy_RFSerialWrite(Adapter, eRFPath, RegAddr, Data); ++ ++ ++ ++#ifdef CONFIG_USB_HCI ++ //PlatformReleaseMutex(&pHalData->mxRFOperate); ++#else ++ //_exit_critical(&pHalData->rf_lock, &irqL); ++#endif ++ ++ //PHY_QueryRFReg(Adapter,eRFPath,RegAddr,BitMask); ++ //RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", ++ // RegAddr, BitMask, Data, eRFPath)); ++ ++} ++ ++ ++// ++// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. ++// ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigMACWithParaFile() ++ * ++ * Overview: This function read BB parameters from general file format, and do register ++ * Read/Write ++ * ++ * Input: PADAPTER Adapter ++ * ps1Byte pFileName ++ * ++ * Output: NONE ++ * ++ * Return: RT_STATUS_SUCCESS: configuration file exist ++ * ++ * Note: The format of MACPHY_REG.txt is different from PHY and RF. ++ * [Register][Mask][Value] ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigMACWithParaFile( ++ IN PADAPTER Adapter, ++ IN u8* pFileName ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ int rtStatus = _SUCCESS; ++ ++ return rtStatus; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigMACWithHeaderFile() ++ * ++ * Overview: This function read BB parameters from Header file we gen, and do register ++ * Read/Write ++ * ++ * Input: PADAPTER Adapter ++ * ps1Byte pFileName ++ * ++ * Output: NONE ++ * ++ * Return: RT_STATUS_SUCCESS: configuration file exist ++ * ++ * Note: The format of MACPHY_REG.txt is different from PHY and RF. ++ * [Register][Mask][Value] ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigMACWithHeaderFile( ++ IN PADAPTER Adapter ++) ++{ ++ u32 i = 0; ++ u32 ArrayLength = 0; ++ u32* ptrArray; ++ //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ //2008.11.06 Modified by tynli. ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Read Rtl819XMACPHY_Array\n")); ++ ArrayLength = MAC_2T_ArrayLength; ++ ptrArray = Rtl819XMAC_Array; ++ ++#ifdef CONFIG_IOL_MAC ++ if(rtw_IOL_applied(Adapter)) ++ { ++ struct xmit_frame *xmit_frame; ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) ++ return _FAIL; ++ ++ for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column ++ rtw_IOL_append_WB_cmd(xmit_frame, ptrArray[i], (u8)ptrArray[i+1]); ++ } ++ ++ return rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); ++ } ++ else ++#endif ++ { ++ for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column ++ rtw_write8(Adapter, ptrArray[i], (u8)ptrArray[i+1]); ++ } ++ } ++ ++ return _SUCCESS; ++ ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHY_MACConfig8192C ++ * ++ * Overview: Condig MAC by header file or parameter file. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 08/12/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++int ++PHY_MACConfig8192C( ++ IN PADAPTER Adapter ++ ) ++{ ++ int rtStatus = _SUCCESS; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ s8 *pszMACRegFile; ++ s8 sz88CMACRegFile[] = RTL8188C_PHY_MACREG; ++ s8 sz92CMACRegFile[] = RTL8192C_PHY_MACREG; ++ BOOLEAN is92C = IS_92C_SERIAL(pHalData->VersionID); ++ ++ if(is92C) ++ pszMACRegFile = sz92CMACRegFile; ++ else ++ pszMACRegFile = sz88CMACRegFile; ++ ++ // ++ // Config MAC ++ // ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = phy_ConfigMACWithHeaderFile(Adapter); ++#else ++ ++ // Not make sure EEPROM, add later ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Read MACREG.txt\n")); ++ rtStatus = phy_ConfigMACWithParaFile(Adapter, pszMACRegFile); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ //this switching setting cause some 8192cu hw have redownload fw fail issue ++ //improve 2-stream TX EVM by Jenyu ++ if(is92C) ++ rtw_write8(Adapter, REG_SPS0_CTRL+3,0x71); ++#endif ++ ++ ++ // 2010.07.13 AMPDU aggregation number 9 ++ //rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM); ++ rtw_write8(Adapter, REG_MAX_AGGR_NUM, 0x0A); //By tynli. 2010.11.18. ++#ifdef CONFIG_USB_HCI ++ if(is92C && (BOARD_USB_DONGLE == pHalData->BoardType)) ++ rtw_write8(Adapter, 0x40,0x04); ++#endif ++ ++ return rtStatus; ++ ++} ++ ++ ++/** ++* Function: phy_InitBBRFRegisterDefinition ++* ++* OverView: Initialize Register definition offset for Radio Path A/B/C/D ++* ++* Input: ++* PADAPTER Adapter, ++* ++* Output: None ++* Return: None ++* Note: The initialization value is constant and it should never be changes ++*/ ++static VOID ++phy_InitBBRFRegisterDefinition( ++ IN PADAPTER Adapter ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ // RF Interface Sowrtware Control ++ pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 ++ pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) ++ pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 ++ pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) ++ ++ // RF Interface Readback Value ++ pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0 ++ pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) ++ pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4 ++ pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) ++ ++ // RF Interface Output (and Enable) ++ pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860 ++ pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864 ++ ++ // RF Interface (Output and) Enable ++ pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) ++ pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) ++ ++ //Addr of LSSI. Wirte RF register by driver ++ pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter ++ pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; ++ ++ // RF parameter ++ pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select ++ pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; ++ pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; ++ pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; ++ ++ // Tx AGC Gain Stage (same for all path. Should we remove this?) ++ pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage ++ pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage ++ pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage ++ pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage ++ ++ // Tranceiver A~D HSSI Parameter-1 ++ pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1 ++ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1 ++ ++ // Tranceiver A~D HSSI Parameter-2 ++ pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2 ++ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2 ++ ++ // RF switch Control ++ pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control ++ pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; ++ pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; ++ pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; ++ ++ // AGC control 1 ++ pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; ++ pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; ++ pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; ++ pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; ++ ++ // AGC control 2 ++ pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; ++ pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; ++ pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; ++ pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; ++ ++ // RX AFE control 1 ++ pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; ++ ++ // RX AFE control 1 ++ pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE; ++ pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; ++ pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; ++ pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; ++ ++ // Tx AFE control 1 ++ pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; ++ pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; ++ ++ // Tx AFE control 2 ++ pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE; ++ pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; ++ pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; ++ pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; ++ ++ // Tranceiver LSSI Readback SI mode ++ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; ++ pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; ++ pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; ++ pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; ++ ++ // Tranceiver LSSI Readback PI mode ++ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback; ++ pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback; ++ //pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack; ++ //pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack; ++ ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigBBWithParaFile() ++ * ++ * Overview: This function read BB parameters from general file format, and do register ++ * Read/Write ++ * ++ * Input: PADAPTER Adapter ++ * ps1Byte pFileName ++ * ++ * Output: NONE ++ * ++ * Return: RT_STATUS_SUCCESS: configuration file exist ++ * 2008/11/06 MH For 92S we do not support silent reset now. Disable ++ * parameter file compare!!!!!!?? ++ * ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigBBWithParaFile( ++ IN PADAPTER Adapter, ++ IN u8* pFileName ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ int rtStatus = _SUCCESS; ++ ++ return rtStatus; ++} ++ ++ ++ ++//**************************************** ++// The following is for High Power PA ++//**************************************** ++VOID ++phy_ConfigBBExternalPA( ++ IN PADAPTER Adapter ++) ++{ ++#ifdef CONFIG_USB_HCI ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u16 i=0; ++ u32 temp=0; ++ ++ if(!pHalData->ExternalPA) ++ { ++ return; ++ } ++ ++ // 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the ++ // same code as SU. It is already updated in PHY_REG_1T_HP.txt. ++#if 0 ++ PHY_SetBBReg(Adapter, 0xee8, BIT28, 1); ++ temp = PHY_QueryBBReg(Adapter, 0x860, bMaskDWord); ++ temp |= (BIT26|BIT21|BIT10|BIT5); ++ PHY_SetBBReg(Adapter, 0x860, bMaskDWord, temp); ++ PHY_SetBBReg(Adapter, 0x870, BIT10, 0); ++ PHY_SetBBReg(Adapter, 0xc80, bMaskDWord, 0x20000080); ++ PHY_SetBBReg(Adapter, 0xc88, bMaskDWord, 0x40000100); ++#endif ++ ++#endif ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigBBWithHeaderFile() ++ * ++ * Overview: This function read BB parameters from general file format, and do register ++ * Read/Write ++ * ++ * Input: PADAPTER Adapter ++ * u1Byte ConfigType 0 => PHY_CONFIG ++ * 1 =>AGC_TAB ++ * ++ * Output: NONE ++ * ++ * Return: RT_STATUS_SUCCESS: configuration file exist ++ * ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigBBWithHeaderFile( ++ IN PADAPTER Adapter, ++ IN u8 ConfigType ++) ++{ ++ int i; ++ u32* Rtl819XPHY_REGArray_Table; ++ u32* Rtl819XAGCTAB_Array_Table; ++ u16 PHY_REGArrayLen, AGCTAB_ArrayLen; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ int ret = _SUCCESS; ++ ++ // ++ // 2009.11.24. Modified by tynli. ++ // ++ if(IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ AGCTAB_ArrayLen = AGCTAB_2TArrayLength; ++ Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_2TArray; ++ PHY_REGArrayLen = PHY_REG_2TArrayLength; ++ Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2TArray; ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType == BOARD_MINICARD ) ++ { ++ PHY_REGArrayLen = PHY_REG_2T_mCardArrayLength; ++ Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2T_mCardArray; ++ } ++#endif ++ } ++ else ++ { ++ AGCTAB_ArrayLen = AGCTAB_1TArrayLength; ++ Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1TArray; ++ PHY_REGArrayLen = PHY_REG_1TArrayLength; ++ Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1TArray; ++#ifdef CONFIG_USB_HCI ++ if(pHalData->BoardType == BOARD_MINICARD ) ++ { ++ PHY_REGArrayLen = PHY_REG_1T_mCardArrayLength; ++ Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_mCardArray; ++ } ++ else if(pHalData->BoardType == BOARD_USB_High_PA) ++ { ++ AGCTAB_ArrayLen = AGCTAB_1T_HPArrayLength; ++ Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1T_HPArray; ++ PHY_REGArrayLen = PHY_REG_1T_HPArrayLength; ++ Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_HPArray; ++ } ++#endif ++ } ++ ++ if(ConfigType == BaseBand_Config_PHY_REG) ++ { ++ #ifdef CONFIG_IOL_BB_PHY_REG ++ if(rtw_IOL_applied(Adapter)) ++ { ++ struct xmit_frame *xmit_frame; ++ u32 tmp_value; ++ ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ for(i=0;iMCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][0] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0])); ++ } ++ if(RegAddr == rTxAGC_A_Rate54_24) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][1] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1])); ++ } ++ if(RegAddr == rTxAGC_A_CCK1_Mcs32) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][6] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6])); ++ } ++ if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0xffffff00) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][7] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7])); ++ } ++ if(RegAddr == rTxAGC_A_Mcs03_Mcs00) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][2] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2])); ++ } ++ if(RegAddr == rTxAGC_A_Mcs07_Mcs04) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][3] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3])); ++ } ++ if(RegAddr == rTxAGC_A_Mcs11_Mcs08) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][4] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4])); ++ } ++ if(RegAddr == rTxAGC_A_Mcs15_Mcs12) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][5] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5])); ++ } ++ if(RegAddr == rTxAGC_B_Rate18_06) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][8] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8])); ++ } ++ if(RegAddr == rTxAGC_B_Rate54_24) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][9] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9])); ++ } ++ if(RegAddr == rTxAGC_B_CCK1_55_Mcs32) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][14] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14])); ++ } ++ if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0x000000ff) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][15] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15])); ++ } ++ if(RegAddr == rTxAGC_B_Mcs03_Mcs00) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][10] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10])); ++ } ++ if(RegAddr == rTxAGC_B_Mcs07_Mcs04) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][11] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11])); ++ } ++ if(RegAddr == rTxAGC_B_Mcs11_Mcs08) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][12] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12])); ++ } ++ if(RegAddr == rTxAGC_B_Mcs15_Mcs12) ++ { ++ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13] = Data; ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][13] = 0x%lx\n", pHalData->pwrGroupCnt, ++ // pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13])); ++ pHalData->pwrGroupCnt++; ++ } ++} ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigBBWithPgParaFile ++ * ++ * Overview: ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/06/2008 MHC Create Version 0. ++ * 2009/07/29 tynli (porting from 92SE branch)2009/03/11 Add copy parameter file to buffer for silent reset ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigBBWithPgParaFile( ++ IN PADAPTER Adapter, ++ IN u8* pFileName) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ int rtStatus = _SUCCESS; ++ ++ ++ return rtStatus; ++ ++} /* phy_ConfigBBWithPgParaFile */ ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigBBWithPgHeaderFile ++ * ++ * Overview: Config PHY_REG_PG array ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/06/2008 MHC Add later!!!!!!.. Please modify for new files!!!! ++ * 11/10/2008 tynli Modify to mew files. ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigBBWithPgHeaderFile( ++ IN PADAPTER Adapter, ++ IN u8 ConfigType) ++{ ++ int i; ++ u32* Rtl819XPHY_REGArray_Table_PG; ++ u16 PHY_REGArrayPGLen; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ // Default: pHalData->RF_Type = RF_2T2R. ++ PHY_REGArrayPGLen = PHY_REG_Array_PGLength; ++ Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG; ++ ++#ifdef CONFIG_USB_HCI ++// 2010/10/19 Chiyoko According to Alex/Willson opinion, VAU/dongle can share the same PHY_REG_PG.txt ++/* ++ if(pHalData->BoardType == BOARD_MINICARD ) ++ { ++ PHY_REGArrayPGLen = PHY_REG_Array_PG_mCardLength; ++ Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_mCard; ++ } ++ else */if(pHalData->BoardType ==BOARD_USB_High_PA ) ++ { ++ PHY_REGArrayPGLen = PHY_REG_Array_PG_HPLength; ++ Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_HP; ++ } ++#endif ++ ++ if(ConfigType == BaseBand_Config_PHY_REG) ++ { ++ for(i=0;iBufOfLines), ++ MAX_LINES_HWCONFIG_TXT, ++ MAX_BYTES_LINE_HWCONFIG_TXT, ++ &nLinesRead ++ ); ++ if(rtStatus == RT_STATUS_SUCCESS) ++ { ++ PlatformMoveMemory(pHalData->BufOfLines6, pHalData->BufOfLines, nLinesRead*MAX_BYTES_LINE_HWCONFIG_TXT); ++ pHalData->nLinesRead6 = nLinesRead; ++ } ++ else ++ { ++ // Temporarily skip PHY_REG_MP.txt if file does not exist. ++ pHalData->nLinesRead6 = 0; ++ RT_TRACE(COMP_INIT, DBG_LOUD, ("No matched file \r\n")); ++ return RT_STATUS_SUCCESS; ++ } ++ } ++ else ++ { ++ PlatformMoveMemory(pHalData->BufOfLines, pHalData->BufOfLines6, MAX_LINES_HWCONFIG_TXT*MAX_BYTES_LINE_HWCONFIG_TXT); ++ nLinesRead = pHalData->nLinesRead6; ++ rtStatus = RT_STATUS_SUCCESS; ++ } ++ ++ ++ if(rtStatus == RT_STATUS_SUCCESS) ++ { ++ RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): read %s ok\n", pFileName)); ++ ++ for(ithLine = 0; ithLine < nLinesRead; ithLine++) ++ { ++ szLine = pHalData->BufOfLines[ithLine]; ++ ++ if(!IsCommentString(szLine)) ++ { ++ // Get 1st hex value as register offset. ++ if(GetHexValueFromString(szLine, &u4bRegOffset, &u4bMove)) ++ { ++ if(u4bRegOffset == 0xff) ++ { // Ending. ++ break; ++ } ++ else if (u4bRegOffset == 0xfe) ++ delay_ms(50); ++ else if (u4bRegOffset == 0xfd) ++ delay_ms(5); ++ else if (u4bRegOffset == 0xfc) ++ delay_ms(1); ++ else if (u4bRegOffset == 0xfb) ++ PlatformStallExecution(50); ++ else if (u4bRegOffset == 0xfa) ++ PlatformStallExecution(5); ++ else if (u4bRegOffset == 0xf9) ++ PlatformStallExecution(1); ++ ++ // Get 2nd hex value as register value. ++ szLine += u4bMove; ++ if(GetHexValueFromString(szLine, &u4bRegValue, &u4bMove)) ++ { ++ RT_TRACE(COMP_FPGA, DBG_TRACE, ("[ADDR]%03lX=%08lX\n", u4bRegOffset, u4bRegValue)); ++ PHY_SetBBReg(Adapter, u4bRegOffset, bMaskDWord, u4bRegValue); ++ ++ // Add 1us delay between BB/RF register setting. ++ PlatformStallExecution(1); ++ } ++ } ++ } ++ } ++ } ++ else ++ { ++ RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): Failed%s\n", pFileName)); ++ } ++#endif ++ ++ return rtStatus; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: phy_ConfigBBWithMpHeaderFile ++ * ++ * Overview: Config PHY_REG_MP array ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 02/04/2010 chiyokolin Modify to new files. ++ *---------------------------------------------------------------------------*/ ++static int ++phy_ConfigBBWithMpHeaderFile( ++ IN PADAPTER Adapter, ++ IN u1Byte ConfigType) ++{ ++ int i; ++ u32* Rtl8192CPHY_REGArray_Table_MP; ++ u16 PHY_REGArrayMPLen; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ PHY_REGArrayMPLen = PHY_REG_Array_MPLength; ++ Rtl8192CPHY_REGArray_Table_MP = Rtl819XPHY_REG_Array_MP; ++ ++ if(ConfigType == BaseBand_Config_PHY_REG) ++ { ++ for(i=0;iphy_BB8192S_Config_ParaFile\n")); ++ ++ if(IS_92C_SERIAL(pHalData->VersionID)){ ++ pszBBRegFile=(u8*)&sz92CBBRegFile ; ++ pszAGCTableFile =(u8*)&sz92CAGCTableFile; ++ } ++ else{ ++ pszBBRegFile=(u8*)&sz88CBBRegFile ; ++ pszAGCTableFile =(u8*)&sz88CAGCTableFile; ++ } ++ ++ // ++ // 1. Read PHY_REG.TXT BB INIT!! ++ // We will seperate as 88C / 92C according to chip version ++ // ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_PHY_REG); ++#else ++ // No matter what kind of CHIP we always read PHY_REG.txt. We must copy different ++ // type of parameter files to phy_reg.txt at first. ++ rtStatus = phy_ConfigBBWithParaFile(Adapter,pszBBRegFile); ++#endif ++ ++ if(rtStatus != _SUCCESS){ ++ //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!")); ++ goto phy_BB8190_Config_ParaFile_Fail; ++ } ++ ++#if MP_DRIVER == 1 ++ // ++ // 1.1 Read PHY_REG_MP.TXT BB INIT!! ++ // We will seperate as 88C / 92C according to chip version ++ // ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = phy_ConfigBBWithMpHeaderFile(Adapter, BaseBand_Config_PHY_REG); ++#else ++ // No matter what kind of CHIP we always read PHY_REG.txt. We must copy different ++ // type of parameter files to phy_reg.txt at first. ++ rtStatus = phy_ConfigBBWithMpParaFile(Adapter, pszBBRegMpFile); ++#endif ++ ++ if(rtStatus != _SUCCESS){ ++// RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg MP Fail!!")); ++ goto phy_BB8190_Config_ParaFile_Fail; ++ } ++#endif // #if (MP_DRIVER == 1) ++ ++ // ++ // 20100318 Joseph: Config 2T2R to 1T2R if necessary. ++ // ++ if(pHalData->rf_type == RF_1T2R) ++ { ++ phy_BB8192C_Config_1T(Adapter); ++ DBG_8192C("phy_BB8192C_Config_ParaFile():Config to 1T!!\n"); ++ } ++ ++ // ++ // 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt ++ // ++ if (pEEPROM->bautoload_fail_flag == _FALSE) ++ { ++ pHalData->pwrGroupCnt = 0; ++ ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = phy_ConfigBBWithPgHeaderFile(Adapter, BaseBand_Config_PHY_REG); ++#else ++ rtStatus = phy_ConfigBBWithPgParaFile(Adapter, (u8*)&szBBRegPgFile); ++#endif ++ } ++ ++ if(rtStatus != _SUCCESS){ ++ //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!")); ++ goto phy_BB8190_Config_ParaFile_Fail; ++ } ++ ++ // ++ // 3. BB AGC table Initialization ++ // ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_AGC_TAB); ++#else ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_BB8192S_Config_ParaFile AGC_TAB.txt\n")); ++ rtStatus = phy_ConfigBBWithParaFile(Adapter, pszAGCTableFile); ++#endif ++ ++ if(rtStatus != _SUCCESS){ ++ //RT_TRACE(COMP_FPGA, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():AGC Table Fail\n")); ++ goto phy_BB8190_Config_ParaFile_Fail; ++ } ++ ++ // Check if the CCK HighPower is turned ON. ++ // This is used to calculate PWDB. ++ pHalData->bCckHighPower = (BOOLEAN)(PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, 0x200)); ++ ++phy_BB8190_Config_ParaFile_Fail: ++ ++ return rtStatus; ++} ++ ++ ++int ++PHY_BBConfig8192C( ++ IN PADAPTER Adapter ++ ) ++{ ++ int rtStatus = _SUCCESS; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 RegVal; ++ u8 TmpU1B=0; ++ u8 value8; ++ ++ phy_InitBBRFRegisterDefinition(Adapter); ++ ++ if(IS_HARDWARE_TYPE_8723A(Adapter)) ++ { ++ // Suggested by Scott. tynli_test. 2010.12.30. ++ //1. 0x28[1] = 1 ++ TmpU1B = rtw_read8(Adapter, REG_AFE_PLL_CTRL); ++ rtw_udelay_os(2); ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL, (TmpU1B|BIT1)); ++ rtw_udelay_os(2); ++ ++ //2. 0x29[7:0] = 0xFF ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xff); ++ rtw_udelay_os(2); ++ ++ //3. 0x02[1:0] = 2b'11 ++ TmpU1B = rtw_read8(Adapter, REG_SYS_FUNC_EN); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN, (TmpU1B|FEN_BB_GLB_RSTn|FEN_BBRSTB)); ++ ++ //undo clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31)); ++ ++ //4. 0x25[6] = 0 ++ TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+1); ++ rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, (TmpU1B&(~BIT6))); ++ ++ //5. 0x24[20] = 0 //Advised by SD3 Alex Wang. 2011.02.09. ++ TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+2); ++ rtw_write8(Adapter, REG_AFE_XTAL_CTRL+2, (TmpU1B&(~BIT4))); ++ ++ //6. 0x1f[7:0] = 0x07 ++ rtw_write8(Adapter, REG_RF_CTRL, 0x07); ++ } ++ else ++ { ++ // Enable BB and RF ++ RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN); ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); ++ ++ // 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x83); ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xdb); ++ ++ rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); ++ ++#ifdef CONFIG_USB_HCI ++ rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB); ++#else ++ rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_PPLL|FEN_PCIEA|FEN_DIO_PCIE|FEN_BB_GLB_RSTn|FEN_BBRSTB); ++#endif ++ ++ //undo clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31)); ++ ++ // 2009/10/21 by SD1 Jong. Modified by tynli. Not in Documented in V8.1. ++#ifdef CONFIG_USB_HCI ++ //To Fix MAC loopback mode fail. Suggested by SD4 Johnny. 2010.03.23. ++ rtw_write8(Adapter, REG_LDOHCI12_CTRL, 0x0f); ++ rtw_write8(Adapter, 0x15, 0xe9); ++#endif ++ ++ rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, 0x80); ++ ++#ifdef CONFIG_PCI_HCI ++ // Force use left antenna by default for 88C. ++ // if(!IS_92C_SERIAL(pHalData->VersionID) || IS_92C_1T2R(pHalData->VersionID)) ++ if(Adapter->ledpriv.LedStrategy != SW_LED_MODE10) ++ { ++ RegVal = rtw_read32(Adapter, REG_LEDCFG0); ++ rtw_write32(Adapter, REG_LEDCFG0, RegVal|BIT23); ++ } ++#endif ++ } ++ ++ // ++ // Config BB and AGC ++ // ++ rtStatus = phy_BB8192C_Config_ParaFile(Adapter); ++#if 0 ++ switch(Adapter->MgntInfo.bRegHwParaFile) ++ { ++ case 0: ++ phy_BB8190_Config_HardCode(Adapter); ++ break; ++ ++ case 1: ++ rtStatus = phy_BB8192C_Config_ParaFile(Adapter); ++ break; ++ ++ case 2: ++ // Partial Modify. ++ phy_BB8190_Config_HardCode(Adapter); ++ phy_BB8192C_Config_ParaFile(Adapter); ++ break; ++ ++ default: ++ phy_BB8190_Config_HardCode(Adapter); ++ break; ++ } ++#endif ++#ifdef CONFIG_USB_HCI ++ if(IS_HARDWARE_TYPE_8192CU(Adapter)&&IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) ++ &&(pHalData->BoardType == BOARD_USB_High_PA)) ++ rtw_write8(Adapter, 0xc72, 0x50); ++#endif ++ ++ return rtStatus; ++} ++ ++ ++int ++PHY_RFConfig8192C( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ int rtStatus = _SUCCESS; ++ ++ // ++ // RF config ++ // ++ rtStatus = PHY_RF6052_Config8192C(Adapter); ++#if 0 ++ switch(pHalData->rf_chip) ++ { ++ case RF_6052: ++ rtStatus = PHY_RF6052_Config(Adapter); ++ break; ++ case RF_8225: ++ rtStatus = PHY_RF8225_Config(Adapter); ++ break; ++ case RF_8256: ++ rtStatus = PHY_RF8256_Config(Adapter); ++ break; ++ case RF_8258: ++ break; ++ case RF_PSEUDO_11N: ++ rtStatus = PHY_RF8225_Config(Adapter); ++ break; ++ default: //for MacOs Warning: "RF_TYPE_MIN" not handled in switch ++ break; ++ } ++#endif ++ return rtStatus; ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHY_ConfigRFWithParaFile() ++ * ++ * Overview: This function read RF parameters from general file format, and do RF 3-wire ++ * ++ * Input: PADAPTER Adapter ++ * ps1Byte pFileName ++ * RF_RADIO_PATH_E eRFPath ++ * ++ * Output: NONE ++ * ++ * Return: RT_STATUS_SUCCESS: configuration file exist ++ * ++ * Note: Delay may be required for RF configuration ++ *---------------------------------------------------------------------------*/ ++int ++rtl8192c_PHY_ConfigRFWithParaFile( ++ IN PADAPTER Adapter, ++ IN u8* pFileName, ++ RF_RADIO_PATH_E eRFPath ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ int rtStatus = _SUCCESS; ++ ++ ++ return rtStatus; ++ ++} ++ ++//**************************************** ++// The following is for High Power PA ++//**************************************** ++#define HighPowerRadioAArrayLen 22 ++//This is for High power PA ++u32 Rtl8192S_HighPower_RadioA_Array[HighPowerRadioAArrayLen] = { ++0x013,0x00029ea4, ++0x013,0x00025e74, ++0x013,0x00020ea4, ++0x013,0x0001ced0, ++0x013,0x00019f40, ++0x013,0x00014e70, ++0x013,0x000106a0, ++0x013,0x0000c670, ++0x013,0x000082a0, ++0x013,0x00004270, ++0x013,0x00000240, ++}; ++ ++int ++PHY_ConfigRFExternalPA( ++ IN PADAPTER Adapter, ++ RF_RADIO_PATH_E eRFPath ++) ++{ ++ int rtStatus = _SUCCESS; ++#ifdef CONFIG_USB_HCI ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u16 i=0; ++ ++ if(!pHalData->ExternalPA) ++ { ++ return rtStatus; ++ } ++ ++ // 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the ++ // same code as SU. It is already updated in radio_a_1T_HP.txt. ++#if 0 ++ //add for SU High Power PA ++ for(i = 0;iVersionID)) ++ { ++ RadioA_ArrayLen = RadioA_2TArrayLength; ++ Rtl819XRadioA_Array_Table = Rtl819XRadioA_2TArray; ++ RadioB_ArrayLen = RadioB_2TArrayLength; ++ Rtl819XRadioB_Array_Table = Rtl819XRadioB_2TArray; ++ } ++ else ++ { ++ RadioA_ArrayLen = RadioA_1TArrayLength; ++ Rtl819XRadioA_Array_Table = Rtl819XRadioA_1TArray; ++ RadioB_ArrayLen = RadioB_1TArrayLength; ++ Rtl819XRadioB_Array_Table = Rtl819XRadioB_1TArray; ++#ifdef CONFIG_USB_HCI ++ if( BOARD_MINICARD == pHalData->BoardType ) ++ { ++ RadioA_ArrayLen = RadioA_1T_mCardArrayLength; ++ Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_mCardArray; ++ RadioB_ArrayLen = RadioB_1T_mCardArrayLength; ++ Rtl819XRadioB_Array_Table = Rtl819XRadioB_1T_mCardArray; ++ } ++ else if( BOARD_USB_High_PA == pHalData->BoardType ) ++ { ++ RadioA_ArrayLen = RadioA_1T_HPArrayLength; ++ Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_HPArray; ++ } ++#endif ++ } ++ ++ switch(eRFPath){ ++ case RF_PATH_A: ++ #ifdef CONFIG_IOL_RF_RF90_PATH_A ++ if(rtw_IOL_applied(Adapter)) ++ { ++ struct xmit_frame *xmit_frame; ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) { ++ rtStatus = _FAIL; ++ goto exit; ++ } ++ ++ for(i = 0;iPHYRegDef[eRFPath]; ++ u32 NewOffset = 0; ++ u32 DataAndAddr = 0; ++ ++ NewOffset = Rtl819XRadioA_Array_Table[i] & 0x3f; ++ DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioA_Array_Table[i+1]&0x000fffff)) & 0x0fffffff; // T65 RF ++ rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr); ++ } ++ } ++ rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); ++ } ++ else ++ #endif ++ { ++ for(i = 0;iPHYRegDef[eRFPath]; ++ u32 NewOffset = 0; ++ u32 DataAndAddr = 0; ++ ++ NewOffset = Rtl819XRadioB_Array_Table[i] & 0x3f; ++ DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioB_Array_Table[i+1]&0x000fffff)) & 0x0fffffff; // T65 RF ++ rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr); ++ } ++ } ++ rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); ++ } ++ else ++ #endif ++ { ++ for(i = 0;i actually we call PlatformStallExecution()) to do NdisStallExecution() ++ // [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK ++ // to run at Dispatch level to achive it. ++ //cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK); ++ WriteData[i] &= 0xfff; ++ PHY_SetRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]); ++ // TODO: we should not delay for such a long time. Ask SD3 ++ rtw_mdelay_os(10); ++ ulRegRead = PHY_QueryRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord); ++ rtw_mdelay_os(10); ++ //cosa PlatformReleaseSpinLock(Adapter, RT_INITIAL_SPINLOCK); ++ break; ++ ++ default: ++ rtStatus = _FAIL; ++ break; ++ } ++ ++ ++ // ++ // Check whether readback data is correct ++ // ++ if(ulRegRead != WriteData[i]) ++ { ++ //RT_TRACE(COMP_FPGA, DBG_LOUD, ("ulRegRead: %lx, WriteData: %lx \n", ulRegRead, WriteData[i])); ++ rtStatus = _FAIL; ++ break; ++ } ++ } ++ ++ return rtStatus; ++} ++ ++ ++VOID ++rtl8192c_PHY_GetHWRegOriginalValue( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ // read rx initial gain ++ pHalData->DefaultInitialGain[0] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XAAGCCore1, bMaskByte0); ++ pHalData->DefaultInitialGain[1] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XBAGCCore1, bMaskByte0); ++ pHalData->DefaultInitialGain[2] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XCAGCCore1, bMaskByte0); ++ pHalData->DefaultInitialGain[3] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XDAGCCore1, bMaskByte0); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ++ //("Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", ++ //pHalData->DefaultInitialGain[0], pHalData->DefaultInitialGain[1], ++ //pHalData->DefaultInitialGain[2], pHalData->DefaultInitialGain[3])); ++ ++ // read framesync ++ pHalData->framesync = (u8)PHY_QueryBBReg(Adapter, rOFDM0_RxDetector3, bMaskByte0); ++ pHalData->framesyncC34 = PHY_QueryBBReg(Adapter, rOFDM0_RxDetector2, bMaskDWord); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Default framesync (0x%x) = 0x%x \n", ++ // rOFDM0_RxDetector3, pHalData->framesync)); ++} ++ ++ ++// ++// Description: ++// Map dBm into Tx power index according to ++// current HW model, for example, RF and PA, and ++// current wireless mode. ++// By Bruce, 2008-01-29. ++// ++static u8 ++phy_DbmToTxPwrIdx( ++ IN PADAPTER Adapter, ++ IN WIRELESS_MODE WirelessMode, ++ IN int PowerInDbm ++ ) ++{ ++ u8 TxPwrIdx = 0; ++ int Offset = 0; ++ ++ ++ // ++ // Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to ++ // 3dbm, and OFDM HT equals to 0dbm repectively. ++ // Note: ++ // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. ++ // By Bruce, 2008-01-29. ++ // ++ switch(WirelessMode) ++ { ++ case WIRELESS_MODE_B: ++ Offset = -7; ++ break; ++ ++ case WIRELESS_MODE_G: ++ case WIRELESS_MODE_N_24G: ++ Offset = -8; ++ break; ++ default: ++ Offset = -8; ++ break; ++ } ++ ++ if((PowerInDbm - Offset) > 0) ++ { ++ TxPwrIdx = (u8)((PowerInDbm - Offset) * 2); ++ } ++ else ++ { ++ TxPwrIdx = 0; ++ } ++ ++ // Tx Power Index is too large. ++ if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S) ++ TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S; ++ ++ return TxPwrIdx; ++} ++ ++// ++// Description: ++// Map Tx power index into dBm according to ++// current HW model, for example, RF and PA, and ++// current wireless mode. ++// By Bruce, 2008-01-29. ++// ++int ++phy_TxPwrIdxToDbm( ++ IN PADAPTER Adapter, ++ IN WIRELESS_MODE WirelessMode, ++ IN u8 TxPwrIdx ++ ) ++{ ++ int Offset = 0; ++ int PwrOutDbm = 0; ++ ++ // ++ // Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to -8dbm. ++ // Note: ++ // The mapping may be different by different NICs. Do not use this formula for what needs accurate result. ++ // By Bruce, 2008-01-29. ++ // ++ switch(WirelessMode) ++ { ++ case WIRELESS_MODE_B: ++ Offset = -7; ++ break; ++ ++ case WIRELESS_MODE_G: ++ case WIRELESS_MODE_N_24G: ++ Offset = -8; ++ default: ++ Offset = -8; ++ break; ++ } ++ ++ PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part. ++ ++ return PwrOutDbm; ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: GetTxPowerLevel8190() ++ * ++ * Overview: This function is export to "common" moudule ++ * ++ * Input: PADAPTER Adapter ++ * psByte Power Level ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++PHY_GetTxPowerLevel8192C( ++ IN PADAPTER Adapter, ++ OUT u32* powerlevel ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 TxPwrLevel = 0; ++ int TxPwrDbm; ++ ++ // ++ // Because the Tx power indexes are different, we report the maximum of them to ++ // meet the CCX TPC request. By Bruce, 2008-01-31. ++ // ++ ++ // CCK ++ TxPwrLevel = pHalData->CurrentCckTxPwrIdx; ++ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_B, TxPwrLevel); ++ ++ // Legacy OFDM ++ TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx + pHalData->LegacyHTTxPowerDiff; ++ ++ // Compare with Legacy OFDM Tx power. ++ if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm) ++ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel); ++ ++ // HT OFDM ++ TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx; ++ ++ // Compare with HT OFDM Tx power. ++ if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm) ++ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel); ++ ++ *powerlevel = TxPwrDbm; ++} ++ ++ ++static void getTxPowerIndex( ++ IN PADAPTER Adapter, ++ IN u8 channel, ++ IN OUT u8* cckPowerLevel, ++ IN OUT u8* ofdmPowerLevel ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 index = (channel -1); ++ // 1. CCK ++ cckPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelCck[RF_PATH_A][index]; //RF-A ++ cckPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelCck[RF_PATH_B][index]; //RF-B ++ ++ // 2. OFDM for 1S or 2S ++ if (GET_RF_TYPE(Adapter) == RF_1T2R || GET_RF_TYPE(Adapter) == RF_1T1R) ++ { ++ // Read HT 40 OFDM TX power ++ ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_1S[RF_PATH_A][index]; ++ ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_1S[RF_PATH_B][index]; ++ } ++ else if (GET_RF_TYPE(Adapter) == RF_2T2R) ++ { ++ // Read HT 40 OFDM TX power ++ ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_2S[RF_PATH_A][index]; ++ ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_2S[RF_PATH_B][index]; ++ } ++ //RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, set tx power index !!\n", channel)); ++} ++ ++static void ccxPowerIndexCheck( ++ IN PADAPTER Adapter, ++ IN u8 channel, ++ IN OUT u8* cckPowerLevel, ++ IN OUT u8* ofdmPowerLevel ++ ) ++{ ++#if 0 ++ PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ PRT_CCX_INFO pCcxInfo = GET_CCX_INFO(pMgntInfo); ++ ++ // ++ // CCX 2 S31, AP control of client transmit power: ++ // 1. We shall not exceed Cell Power Limit as possible as we can. ++ // 2. Tolerance is +/- 5dB. ++ // 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit. ++ // ++ // TODO: ++ // 1. 802.11h power contraint ++ // ++ // 071011, by rcnjko. ++ // ++ if( pMgntInfo->OpMode == RT_OP_MODE_INFRASTRUCTURE && ++ pMgntInfo->mAssoc && ++ pCcxInfo->bUpdateCcxPwr && ++ pCcxInfo->bWithCcxCellPwr && ++ channel == pMgntInfo->dot11CurrentChannelNumber) ++ { ++ u1Byte CckCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, pCcxInfo->CcxCellPwr); ++ u1Byte LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_G, pCcxInfo->CcxCellPwr); ++ u1Byte OfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, pCcxInfo->CcxCellPwr); ++ ++ RT_TRACE(COMP_TXAGC, DBG_LOUD, ++ ("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", ++ pCcxInfo->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx)); ++ RT_TRACE(COMP_TXAGC, DBG_LOUD, ++ ("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", ++ channel, cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); ++ ++ // CCK ++ if(cckPowerLevel[0] > CckCellPwrIdx) ++ cckPowerLevel[0] = CckCellPwrIdx; ++ // Legacy OFDM, HT OFDM ++ if(ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx) ++ { ++ if((OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff) > 0) ++ { ++ ofdmPowerLevel[0] = OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff; ++ } ++ else ++ { ++ ofdmPowerLevel[0] = 0; ++ } ++ } ++ ++ RT_TRACE(COMP_TXAGC, DBG_LOUD, ++ ("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", ++ cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); ++ } ++ ++ pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0]; ++ pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0]; ++ ++ RT_TRACE(COMP_TXAGC, DBG_LOUD, ++ ("PHY_SetTxPowerLevel8192S(): CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", ++ cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); ++#endif ++} ++/*----------------------------------------------------------------------------- ++ * Function: SetTxPowerLevel8190() ++ * ++ * Overview: This function is export to "HalCommon" moudule ++ * We must consider RF path later!!!!!!! ++ * ++ * Input: PADAPTER Adapter ++ * u1Byte channel ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * 2008/11/04 MHC We remove EEPROM_93C56. ++ * We need to move CCX relative code to independet file. ++ * 2009/01/21 MHC Support new EEPROM format from SD3 requirement. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++PHY_SetTxPowerLevel8192C( ++ IN PADAPTER Adapter, ++ IN u8 channel ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 cckPowerLevel[2], ofdmPowerLevel[2]; // [0]:RF-A, [1]:RF-B ++ ++#if(MP_DRIVER == 1) ++ return; ++#endif ++ ++ if(pHalData->bTXPowerDataReadFromEEPORM == _FALSE) ++ return; ++ ++ getTxPowerIndex(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, cckPowerLevel (A / B) = 0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n", ++ // channel, cckPowerLevel[0], cckPowerLevel[1], ofdmPowerLevel[0], ofdmPowerLevel[1])); ++ ++ ccxPowerIndexCheck(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]); ++ ++ rtl8192c_PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]); ++ rtl8192c_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel); ++ ++#if 0 ++ switch(pHalData->rf_chip) ++ { ++ case RF_8225: ++ PHY_SetRF8225CckTxPower(Adapter, cckPowerLevel[0]); ++ PHY_SetRF8225OfdmTxPower(Adapter, ofdmPowerLevel[0]); ++ break; ++ ++ case RF_8256: ++ PHY_SetRF8256CCKTxPower(Adapter, cckPowerLevel[0]); ++ PHY_SetRF8256OFDMTxPower(Adapter, ofdmPowerLevel[0]); ++ break; ++ ++ case RF_6052: ++ PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]); ++ PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel); ++ break; ++ ++ case RF_8258: ++ break; ++ } ++#endif ++ ++} ++ ++ ++// ++// Description: ++// Update transmit power level of all channel supported. ++// ++// TODO: ++// A mode. ++// By Bruce, 2008-02-04. ++// ++BOOLEAN ++PHY_UpdateTxPowerDbm8192C( ++ IN PADAPTER Adapter, ++ IN int powerInDbm ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 idx; ++ u8 rf_path; ++ ++ // TODO: A mode Tx power. ++ u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, powerInDbm); ++ u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, powerInDbm); ++ ++ if(OfdmTxPwrIdx - pHalData->LegacyHTTxPowerDiff > 0) ++ OfdmTxPwrIdx -= pHalData->LegacyHTTxPowerDiff; ++ else ++ OfdmTxPwrIdx = 0; ++ ++ //RT_TRACE(COMP_TXAGC, DBG_LOUD, ("PHY_UpdateTxPowerDbm8192S(): %ld dBm , CckTxPwrIdx = %d, OfdmTxPwrIdx = %d\n", powerInDbm, CckTxPwrIdx, OfdmTxPwrIdx)); ++ ++ for(idx = 0; idx < 14; idx++) ++ { ++ for (rf_path = 0; rf_path < 2; rf_path++) ++ { ++ pHalData->TxPwrLevelCck[rf_path][idx] = CckTxPwrIdx; ++ pHalData->TxPwrLevelHT40_1S[rf_path][idx] = ++ pHalData->TxPwrLevelHT40_2S[rf_path][idx] = OfdmTxPwrIdx; ++ } ++ } ++ ++ //Adapter->HalFunc.SetTxPowerLevelHandler(Adapter, pHalData->CurrentChannel);//gtest:todo ++ ++ return _TRUE; ++} ++ ++ ++/* ++ Description: ++ When beacon interval is changed, the values of the ++ hw registers should be modified. ++ By tynli, 2008.10.24. ++ ++*/ ++ ++ ++void ++rtl8192c_PHY_SetBeaconHwReg( ++ IN PADAPTER Adapter, ++ IN u16 BeaconInterval ++ ) ++{ ++ ++} ++ ++ ++VOID ++PHY_ScanOperationBackup8192C( ++ IN PADAPTER Adapter, ++ IN u8 Operation ++ ) ++{ ++#if 0 ++ IO_TYPE IoType; ++ ++ if(!Adapter->bDriverStopped) ++ { ++ switch(Operation) ++ { ++ case SCAN_OPT_BACKUP: ++ IoType = IO_CMD_PAUSE_DM_BY_SCAN; ++ rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD, (pu1Byte)&IoType); ++ ++ break; ++ ++ case SCAN_OPT_RESTORE: ++ IoType = IO_CMD_RESUME_DM_BY_SCAN; ++ rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD, (pu1Byte)&IoType); ++ break; ++ ++ default: ++ RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n")); ++ break; ++ } ++ } ++#endif ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHY_SetBWModeCallback8192C() ++ * ++ * Overview: Timer callback function for SetSetBWMode ++ * ++ * Input: PRT_TIMER pTimer ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Note: (1) We do not take j mode into consideration now ++ * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run ++ * concurrently? ++ *---------------------------------------------------------------------------*/ ++static VOID ++_PHY_SetBWMode92C( ++ IN PADAPTER Adapter ++) ++{ ++// PADAPTER Adapter = (PADAPTER)pTimer->Adapter; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 regBwOpMode; ++ u8 regRRSR_RSC; ++ ++ //return; ++ ++ // Added it for 20/40 mhz switch time evaluation by guangan 070531 ++ //u4Byte NowL, NowH; ++ //u8Byte BeginTime, EndTime; ++ ++ /*RT_TRACE(COMP_SCAN, DBG_LOUD, ("==>PHY_SetBWModeCallback8192C() Switch to %s bandwidth\n", \ ++ pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"))*/ ++ ++ if(pHalData->rf_chip == RF_PSEUDO_11N) ++ { ++ //pHalData->SetBWModeInProgress= _FALSE; ++ return; ++ } ++ ++ // There is no 40MHz mode in RF_8225. ++ if(pHalData->rf_chip==RF_8225) ++ return; ++ ++ if(Adapter->bDriverStopped) ++ return; ++ ++ // Added it for 20/40 mhz switch time evaluation by guangan 070531 ++ //NowL = PlatformEFIORead4Byte(Adapter, TSFR); ++ //NowH = PlatformEFIORead4Byte(Adapter, TSFR+4); ++ //BeginTime = ((u8Byte)NowH << 32) + NowL; ++ ++ //3// ++ //3//<1>Set MAC register ++ //3// ++ //Adapter->HalFunc.SetBWModeHandler(); ++ ++ regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE); ++ regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2); ++ //regBwOpMode = rtw_hal_get_hwreg(Adapter,HW_VAR_BWMODE,(pu1Byte)®BwOpMode); ++ ++ switch(pHalData->CurrentChannelBW) ++ { ++ case HT_CHANNEL_WIDTH_20: ++ regBwOpMode |= BW_OPMODE_20MHZ; ++ // 2007/02/07 Mark by Emily becasue we have not verify whether this register works ++ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); ++ break; ++ ++ case HT_CHANNEL_WIDTH_40: ++ regBwOpMode &= ~BW_OPMODE_20MHZ; ++ // 2007/02/07 Mark by Emily becasue we have not verify whether this register works ++ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); ++ ++ regRRSR_RSC = (regRRSR_RSC&0x90) |(pHalData->nCur40MhzPrimeSC<<5); ++ rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC); ++ break; ++ ++ default: ++ /*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C(): ++ unknown Bandwidth: %#X\n",pHalData->CurrentChannelBW));*/ ++ break; ++ } ++ ++ //3// ++ //3//<2>Set PHY related register ++ //3// ++ switch(pHalData->CurrentChannelBW) ++ { ++ /* 20 MHz channel*/ ++ case HT_CHANNEL_WIDTH_20: ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0); ++ PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0); ++ PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 1); ++ ++ break; ++ ++ ++ /* 40 MHz channel*/ ++ case HT_CHANNEL_WIDTH_40: ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1); ++ PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1); ++ ++ // Set Control channel to upper or lower. These settings are required only for 40MHz ++ PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1)); ++ PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC); ++ PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 0); ++ ++ PHY_SetBBReg(Adapter, 0x818, (BIT26|BIT27), (pHalData->nCur40MhzPrimeSC==HAL_PRIME_CHNL_OFFSET_LOWER)?2:1); ++ ++ break; ++ ++ ++ ++ default: ++ /*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C(): unknown Bandwidth: %#X\n"\ ++ ,pHalData->CurrentChannelBW));*/ ++ break; ++ ++ } ++ //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 ++ ++ // Added it for 20/40 mhz switch time evaluation by guangan 070531 ++ //NowL = PlatformEFIORead4Byte(Adapter, TSFR); ++ //NowH = PlatformEFIORead4Byte(Adapter, TSFR+4); ++ //EndTime = ((u8Byte)NowH << 32) + NowL; ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime))); ++ ++ //3<3>Set RF related register ++ switch(pHalData->rf_chip) ++ { ++ case RF_8225: ++ //PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); ++ break; ++ ++ case RF_8256: ++ // Please implement this function in Hal8190PciPhy8256.c ++ //PHY_SetRF8256Bandwidth(Adapter, pHalData->CurrentChannelBW); ++ break; ++ ++ case RF_8258: ++ // Please implement this function in Hal8190PciPhy8258.c ++ // PHY_SetRF8258Bandwidth(); ++ break; ++ ++ case RF_PSEUDO_11N: ++ // Do Nothing ++ break; ++ ++ case RF_6052: ++ rtl8192c_PHY_RF6052SetBandwidth(Adapter, pHalData->CurrentChannelBW); ++ break; ++ ++ default: ++ //RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID)); ++ break; ++ } ++ ++ //pHalData->SetBWModeInProgress= FALSE; ++ ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("<==PHY_SetBWModeCallback8192C() \n" )); ++} ++ ++ ++ /*----------------------------------------------------------------------------- ++ * Function: SetBWMode8190Pci() ++ * ++ * Overview: This function is export to "HalCommon" moudule ++ * ++ * Input: PADAPTER Adapter ++ * HT_CHANNEL_WIDTH Bandwidth //20M or 40M ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Note: We do not take j mode into consideration now ++ *---------------------------------------------------------------------------*/ ++VOID ++PHY_SetBWMode8192C( ++ IN PADAPTER Adapter, ++ IN HT_CHANNEL_WIDTH Bandwidth, // 20M or 40M ++ IN unsigned char Offset // Upper, Lower, or Don't care ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ HT_CHANNEL_WIDTH tmpBW= pHalData->CurrentChannelBW; ++ // Modified it for 20/40 mhz switch by guangan 070531 ++ //PMGNT_INFO pMgntInfo=&Adapter->MgntInfo; ++ ++ //return; ++ ++ //if(pHalData->SwChnlInProgress) ++// if(pMgntInfo->bScanInProgress) ++// { ++// RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s Exit because bScanInProgress!\n", ++// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); ++// return; ++// } ++ ++// if(pHalData->SetBWModeInProgress) ++// { ++// // Modified it for 20/40 mhz switch by guangan 070531 ++// RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s cancel last timer because SetBWModeInProgress!\n", ++// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz")); ++// PlatformCancelTimer(Adapter, &pHalData->SetBWModeTimer); ++// //return; ++// } ++ ++ //if(pHalData->SetBWModeInProgress) ++ // return; ++ ++ //pHalData->SetBWModeInProgress= TRUE; ++ ++ pHalData->CurrentChannelBW = Bandwidth; ++ ++#if 0 ++ if(Offset==HT_EXTCHNL_OFFSET_LOWER) ++ pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; ++ else if(Offset==HT_EXTCHNL_OFFSET_UPPER) ++ pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; ++ else ++ pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++#else ++ pHalData->nCur40MhzPrimeSC = Offset; ++#endif ++ ++ if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) ++ { ++#ifdef USE_WORKITEM ++ //PlatformScheduleWorkItem(&(pHalData->SetBWModeWorkItem)); ++#else ++ #if 0 ++ //PlatformSetTimer(Adapter, &(pHalData->SetBWModeTimer), 0); ++ #else ++ _PHY_SetBWMode92C(Adapter); ++ #endif ++#endif ++ } ++ else ++ { ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() SetBWModeInProgress FALSE driver sleep or unload\n")); ++ //pHalData->SetBWModeInProgress= FALSE; ++ pHalData->CurrentChannelBW = tmpBW; ++ } ++ ++} ++ ++ ++static void _PHY_SwChnl8192C(PADAPTER Adapter, u8 channel) ++{ ++ u8 eRFPath; ++ u32 param1, param2; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if ( Adapter->bNotifyChannelChange ) ++ { ++ DBG_871X( "[%s] ch = %d\n", __FUNCTION__, channel ); ++ } ++ ++ //s1. pre common command - CmdID_SetTxPowerLevel ++ PHY_SetTxPowerLevel8192C(Adapter, channel); ++ ++ //s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel ++ param1 = RF_CHNLBW; ++ param2 = channel; ++ for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ { ++ pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | param2); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]); ++ } ++ ++ ++ //s3. post common command - CmdID_End, None ++ ++} ++ ++VOID ++PHY_SwChnl8192C( // Call after initialization ++ IN PADAPTER Adapter, ++ IN u8 channel ++ ) ++{ ++ //PADAPTER Adapter = ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, _TRUE); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 tmpchannel = pHalData->CurrentChannel; ++ BOOLEAN bResult = _TRUE; ++ ++ if(pHalData->rf_chip == RF_PSEUDO_11N) ++ { ++ //pHalData->SwChnlInProgress=FALSE; ++ return; //return immediately if it is peudo-phy ++ } ++ ++ //if(pHalData->SwChnlInProgress) ++ // return; ++ ++ //if(pHalData->SetBWModeInProgress) ++ // return; ++ ++ //-------------------------------------------- ++ switch(pHalData->CurrentWirelessMode) ++ { ++ case WIRELESS_MODE_A: ++ case WIRELESS_MODE_N_5G: ++ //RT_ASSERT((channel>14), ("WIRELESS_MODE_A but channel<=14")); ++ break; ++ ++ case WIRELESS_MODE_B: ++ //RT_ASSERT((channel<=14), ("WIRELESS_MODE_B but channel>14")); ++ break; ++ ++ case WIRELESS_MODE_G: ++ case WIRELESS_MODE_N_24G: ++ //RT_ASSERT((channel<=14), ("WIRELESS_MODE_G but channel>14")); ++ break; ++ ++ default: ++ //RT_ASSERT(FALSE, ("Invalid WirelessMode(%#x)!!\n", pHalData->CurrentWirelessMode)); ++ break; ++ } ++ //-------------------------------------------- ++ ++ //pHalData->SwChnlInProgress = TRUE; ++ if(channel == 0) ++ channel = 1; ++ ++ pHalData->CurrentChannel=channel; ++ ++ //pHalData->SwChnlStage=0; ++ //pHalData->SwChnlStep=0; ++ ++ if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) ++ { ++#ifdef USE_WORKITEM ++ //bResult = PlatformScheduleWorkItem(&(pHalData->SwChnlWorkItem)); ++#else ++ #if 0 ++ //PlatformSetTimer(Adapter, &(pHalData->SwChnlTimer), 0); ++ #else ++ _PHY_SwChnl8192C(Adapter, channel); ++ #endif ++#endif ++ if(bResult) ++ { ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress TRUE schdule workitem done\n")); ++ } ++ else ++ { ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE schdule workitem error\n")); ++ //if(IS_HARDWARE_TYPE_8192SU(Adapter)) ++ //{ ++ // pHalData->SwChnlInProgress = FALSE; ++ pHalData->CurrentChannel = tmpchannel; ++ //} ++ } ++ ++ } ++ else ++ { ++ //RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE driver sleep or unload\n")); ++ //if(IS_HARDWARE_TYPE_8192SU(Adapter)) ++ //{ ++ // pHalData->SwChnlInProgress = FALSE; ++ pHalData->CurrentChannel = tmpchannel; ++ //} ++ } ++} ++ ++ ++static BOOLEAN ++phy_SwChnlStepByStep( ++ IN PADAPTER Adapter, ++ IN u8 channel, ++ IN u8 *stage, ++ IN u8 *step, ++ OUT u32 *delay ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ PCHANNEL_ACCESS_SETTING pChnlAccessSetting; ++ SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; ++ u4Byte PreCommonCmdCnt; ++ SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; ++ u4Byte PostCommonCmdCnt; ++ SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; ++ u4Byte RfDependCmdCnt; ++ SwChnlCmd *CurrentCmd; ++ u1Byte eRFPath; ++ u4Byte RfTXPowerCtrl; ++ BOOLEAN bAdjRfTXPowerCtrl = _FALSE; ++ ++ ++ RT_ASSERT((Adapter != NULL), ("Adapter should not be NULL\n")); ++#if(MP_DRIVER != 1) ++ RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); ++#endif ++ RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n")); ++ ++ pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting; ++ RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n")); ++ ++ //for(eRFPath = RF_PATH_A; eRFPath NumTotalRFPath; eRFPath++) ++ //for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ //{ ++ // <1> Fill up pre common command. ++ PreCommonCmdCnt = 0; ++ phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, ++ CmdID_SetTxPowerLevel, 0, 0, 0); ++ phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, ++ CmdID_End, 0, 0, 0); ++ ++ // <2> Fill up post common command. ++ PostCommonCmdCnt = 0; ++ ++ phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, ++ CmdID_End, 0, 0, 0); ++ ++ // <3> Fill up RF dependent command. ++ RfDependCmdCnt = 0; ++ switch( pHalData->RFChipID ) ++ { ++ case RF_8225: ++ RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); ++ // 2008/09/04 MH Change channel. ++ if(channel==14) channel++; ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_RF_WriteReg, rZebra1_Channel, (0x10+channel-1), 10); ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_End, 0, 0, 0); ++ break; ++ ++ case RF_8256: ++ // TEST!! This is not the table for 8256!! ++ RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_RF_WriteReg, rRfChannel, channel, 10); ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_End, 0, 0, 0); ++ break; ++ ++ case RF_6052: ++ RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel)); ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_RF_WriteReg, RF_CHNLBW, channel, 10); ++ phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, ++ CmdID_End, 0, 0, 0); ++ ++ break; ++ ++ case RF_8258: ++ break; ++ ++ // For FPGA two MAC verification ++ case RF_PSEUDO_11N: ++ return TRUE; ++ default: ++ RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID)); ++ return FALSE; ++ break; ++ } ++ ++ ++ do{ ++ switch(*stage) ++ { ++ case 0: ++ CurrentCmd=&PreCommonCmd[*step]; ++ break; ++ case 1: ++ CurrentCmd=&RfDependCmd[*step]; ++ break; ++ case 2: ++ CurrentCmd=&PostCommonCmd[*step]; ++ break; ++ } ++ ++ if(CurrentCmd->CmdID==CmdID_End) ++ { ++ if((*stage)==2) ++ { ++ return TRUE; ++ } ++ else ++ { ++ (*stage)++; ++ (*step)=0; ++ continue; ++ } ++ } ++ ++ switch(CurrentCmd->CmdID) ++ { ++ case CmdID_SetTxPowerLevel: ++ PHY_SetTxPowerLevel8192C(Adapter,channel); ++ break; ++ case CmdID_WritePortUlong: ++ PlatformEFIOWrite4Byte(Adapter, CurrentCmd->Para1, CurrentCmd->Para2); ++ break; ++ case CmdID_WritePortUshort: ++ PlatformEFIOWrite2Byte(Adapter, CurrentCmd->Para1, (u2Byte)CurrentCmd->Para2); ++ break; ++ case CmdID_WritePortUchar: ++ PlatformEFIOWrite1Byte(Adapter, CurrentCmd->Para1, (u1Byte)CurrentCmd->Para2); ++ break; ++ case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!! ++ for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ { ++#if 1 ++ pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | CurrentCmd->Para2); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]); ++#else ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, (CurrentCmd->Para2)); ++#endif ++ } ++ break; ++ } ++ ++ break; ++ }while(TRUE); ++ //cosa }/*for(Number of RF paths)*/ ++ ++ (*delay)=CurrentCmd->msDelay; ++ (*step)++; ++ return FALSE; ++#endif ++ return _TRUE; ++} ++ ++ ++static BOOLEAN ++phy_SetSwChnlCmdArray( ++ SwChnlCmd* CmdTable, ++ u32 CmdTableIdx, ++ u32 CmdTableSz, ++ SwChnlCmdID CmdID, ++ u32 Para1, ++ u32 Para2, ++ u32 msDelay ++ ) ++{ ++ SwChnlCmd* pCmd; ++ ++ if(CmdTable == NULL) ++ { ++ //RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n")); ++ return _FALSE; ++ } ++ if(CmdTableIdx >= CmdTableSz) ++ { ++ //RT_ASSERT(FALSE, ++ // ("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%ld, CmdTableSz:%ld\n", ++ // CmdTableIdx, CmdTableSz)); ++ return _FALSE; ++ } ++ ++ pCmd = CmdTable + CmdTableIdx; ++ pCmd->CmdID = CmdID; ++ pCmd->Para1 = Para1; ++ pCmd->Para2 = Para2; ++ pCmd->msDelay = msDelay; ++ ++ return _TRUE; ++} ++ ++ ++static void ++phy_FinishSwChnlNow( // We should not call this function directly ++ IN PADAPTER Adapter, ++ IN u8 channel ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 delay; ++ ++ while(!phy_SwChnlStepByStep(Adapter,channel,&pHalData->SwChnlStage,&pHalData->SwChnlStep,&delay)) ++ { ++ if(delay>0) ++ rtw_mdelay_os(delay); ++ } ++#endif ++} ++ ++ ++ ++// ++// Description: ++// Switch channel synchronously. Called by SwChnlByDelayHandler. ++// ++// Implemented by Bruce, 2008-02-14. ++// The following procedure is operted according to SwChanlCallback8190Pci(). ++// However, this procedure is performed synchronously which should be running under ++// passive level. ++// ++VOID ++PHY_SwChnlPhy8192C( // Only called during initialize ++ IN PADAPTER Adapter, ++ IN u8 channel ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ //RT_TRACE(COMP_SCAN | COMP_RM, DBG_LOUD, ("==>PHY_SwChnlPhy8192S(), switch from channel %d to channel %d.\n", pHalData->CurrentChannel, channel)); ++ ++ // Cannot IO. ++ //if(RT_CANNOT_IO(Adapter)) ++ // return; ++ ++ // Channel Switching is in progress. ++ //if(pHalData->SwChnlInProgress) ++ // return; ++ ++ //return immediately if it is peudo-phy ++ if(pHalData->rf_chip == RF_PSEUDO_11N) ++ { ++ //pHalData->SwChnlInProgress=FALSE; ++ return; ++ } ++ ++ //pHalData->SwChnlInProgress = TRUE; ++ if( channel == 0) ++ channel = 1; ++ ++ pHalData->CurrentChannel=channel; ++ ++ //pHalData->SwChnlStage = 0; ++ //pHalData->SwChnlStep = 0; ++ ++ phy_FinishSwChnlNow(Adapter,channel); ++ ++ //pHalData->SwChnlInProgress = FALSE; ++} ++ ++ ++// ++// Description: ++// Configure H/W functionality to enable/disable Monitor mode. ++// Note, because we possibly need to configure BB and RF in this function, ++// so caller should in PASSIVE_LEVEL. 080118, by rcnjko. ++// ++VOID ++PHY_SetMonitorMode8192C( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bEnableMonitorMode ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ BOOLEAN bFilterOutNonAssociatedBSSID = FALSE; ++ ++ //2 Note: we may need to stop antenna diversity. ++ if(bEnableMonitorMode) ++ { ++ bFilterOutNonAssociatedBSSID = FALSE; ++ RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): enable monitor mode\n")); ++ ++ pHalData->bInMonitorMode = TRUE; ++ pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, TRUE, TRUE); ++ rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID); ++ } ++ else ++ { ++ bFilterOutNonAssociatedBSSID = TRUE; ++ RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): disable monitor mode\n")); ++ ++ pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, FALSE, TRUE); ++ pHalData->bInMonitorMode = FALSE; ++ rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID); ++ } ++#endif ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHYCheckIsLegalRfPath8190Pci() ++ * ++ * Overview: Check different RF type to execute legal judgement. If RF Path is illegal ++ * We will return false. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/15/2007 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++BOOLEAN ++PHY_CheckIsLegalRfPath8192C( ++ IN PADAPTER pAdapter, ++ IN u32 eRFPath) ++{ ++// HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ BOOLEAN rtValue = _TRUE; ++ ++ // NOt check RF Path now.! ++#if 0 ++ if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A) ++ { ++ rtValue = FALSE; ++ } ++ if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A) ++ { ++ ++ } ++#endif ++ return rtValue; ++ ++} /* PHY_CheckIsLegalRfPath8192C */ ++ ++//------------------------------------------------------------------------- ++// ++// IQK ++// ++//------------------------------------------------------------------------- ++#define MAX_TOLERANCE 5 ++#define IQK_DELAY_TIME 1 //ms ++ ++static u8 //bit0 = 1 => Tx OK, bit1 = 1 => Rx OK ++_PHY_PathA_IQK( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN configPathB ++ ) ++{ ++ u32 regEAC, regE94, regE9C, regEA4; ++ u8 result = 0x00; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ //RTPRINT(FINIT, INIT_IQK, ("Path A IQK!\n")); ++ ++ //path-A IQK setting ++ //RTPRINT(FINIT, INIT_IQK, ("Path-A IQK setting!\n")); ++ PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x10008c1f); ++ PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x10008c1f); ++ PHY_SetBBReg(pAdapter, rTx_IQK_PI_A, bMaskDWord, 0x82140102); ++ ++ PHY_SetBBReg(pAdapter, rRx_IQK_PI_A, bMaskDWord, configPathB ? 0x28160202 : ++ IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202:0x28160502); ++ ++ //path-B IQK setting ++ if(configPathB) ++ { ++ PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x10008c22); ++ PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x10008c22); ++ PHY_SetBBReg(pAdapter, rTx_IQK_PI_B, bMaskDWord, 0x82140102); ++ PHY_SetBBReg(pAdapter, rRx_IQK_PI_B, bMaskDWord, 0x28160202); ++ } ++ ++ //LO calibration setting ++ //RTPRINT(FINIT, INIT_IQK, ("LO calibration setting!\n")); ++ PHY_SetBBReg(pAdapter, rIQK_AGC_Rsp, bMaskDWord, 0x001028d1); ++ ++ //One shot, path A LOK & IQK ++ //RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n")); ++ PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf9000000); ++ PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf8000000); ++ ++ // delay x ms ++ //RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path A LOK & IQK.\n", IQK_DELAY_TIME)); ++ rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000); ++ ++ // Check failed ++ regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC)); ++ regE94 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xe94 = 0x%x\n", regE94)); ++ regE9C= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xe9c = 0x%x\n", regE9C)); ++ regEA4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xea4 = 0x%x\n", regEA4)); ++ ++ if(!(regEAC & BIT28) && ++ (((regE94 & 0x03FF0000)>>16) != 0x142) && ++ (((regE9C & 0x03FF0000)>>16) != 0x42) ) ++ result |= 0x01; ++ else //if Tx not OK, ignore Rx ++ return result; ++ ++ if(!(regEAC & BIT27) && //if Tx is OK, check whether Rx is OK ++ (((regEA4 & 0x03FF0000)>>16) != 0x132) && ++ (((regEAC & 0x03FF0000)>>16) != 0x36)) ++ result |= 0x02; ++ else ++ DBG_8192C("Path A Rx IQK fail!!\n"); ++ ++ return result; ++ ++ ++} ++ ++static u8 //bit0 = 1 => Tx OK, bit1 = 1 => Rx OK ++_PHY_PathB_IQK( ++ IN PADAPTER pAdapter ++ ) ++{ ++ u32 regEAC, regEB4, regEBC, regEC4, regECC; ++ u8 result = 0x00; ++ //RTPRINT(FINIT, INIT_IQK, ("Path B IQK!\n")); ++ ++ //One shot, path B LOK & IQK ++ //RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n")); ++ PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000002); ++ PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000000); ++ ++ // delay x ms ++ //RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path B LOK & IQK.\n", IQK_DELAY_TIME)); ++ rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000); ++ ++ // Check failed ++ regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC)); ++ regEB4 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xeb4 = 0x%x\n", regEB4)); ++ regEBC= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xebc = 0x%x\n", regEBC)); ++ regEC4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xec4 = 0x%x\n", regEC4)); ++ regECC= PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("0xecc = 0x%x\n", regECC)); ++ ++ if(!(regEAC & BIT31) && ++ (((regEB4 & 0x03FF0000)>>16) != 0x142) && ++ (((regEBC & 0x03FF0000)>>16) != 0x42)) ++ result |= 0x01; ++ else ++ return result; ++ ++ if(!(regEAC & BIT30) && ++ (((regEC4 & 0x03FF0000)>>16) != 0x132) && ++ (((regECC & 0x03FF0000)>>16) != 0x36)) ++ result |= 0x02; ++ else ++ DBG_8192C("Path B Rx IQK fail!!\n"); ++ ++ ++ return result; ++ ++} ++ ++static VOID ++_PHY_PathAFillIQKMatrix( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bIQKOK, ++ IN int result[][8], ++ IN u8 final_candidate, ++ IN BOOLEAN bTxOnly ++ ) ++{ ++ u32 Oldval_0, X, TX0_A, reg; ++ s32 Y, TX0_C; ++ ++ DBG_8192C("Path A IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed"); ++ ++ if(final_candidate == 0xFF) ++ return; ++ else if(bIQKOK) ++ { ++ Oldval_0 = (PHY_QueryBBReg(pAdapter, rOFDM0_XATxIQImbalance, bMaskDWord) >> 22) & 0x3FF; ++ ++ X = result[final_candidate][0]; ++ if ((X & 0x00000200) != 0) ++ X = X | 0xFFFFFC00; ++ TX0_A = (X * Oldval_0) >> 8; ++ //RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX0_A = 0x%lx, Oldval_0 0x%lx\n", X, TX0_A, Oldval_0)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x3FF, TX0_A); ++ PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(31), ((X* Oldval_0>>7) & 0x1)); ++ ++ Y = result[final_candidate][1]; ++ if ((Y & 0x00000200) != 0) ++ Y = Y | 0xFFFFFC00; ++ TX0_C = (Y * Oldval_0) >> 8; ++ //RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX = 0x%lx\n", Y, TX0_C)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XCTxAFE, 0xF0000000, ((TX0_C&0x3C0)>>6)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x003F0000, (TX0_C&0x3F)); ++ PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(29), ((Y* Oldval_0>>7) & 0x1)); ++ ++ if(bTxOnly) ++ { ++ DBG_8192C("_PHY_PathAFillIQKMatrix only Tx OK\n"); ++ return; ++ } ++ ++ reg = result[final_candidate][2]; ++ PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0x3FF, reg); ++ ++ reg = result[final_candidate][3] & 0x3F; ++ PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0xFC00, reg); ++ ++ reg = (result[final_candidate][3] >> 6) & 0xF; ++ PHY_SetBBReg(pAdapter, rOFDM0_RxIQExtAnta, 0xF0000000, reg); ++ } ++} ++ ++static VOID ++_PHY_PathBFillIQKMatrix( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bIQKOK, ++ IN int result[][8], ++ IN u8 final_candidate, ++ IN BOOLEAN bTxOnly //do Tx only ++ ) ++{ ++ u32 Oldval_1, X, TX1_A, reg; ++ s32 Y, TX1_C; ++ ++ DBG_8192C("Path B IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed"); ++ ++ if(final_candidate == 0xFF) ++ return; ++ else if(bIQKOK) ++ { ++ Oldval_1 = (PHY_QueryBBReg(pAdapter, rOFDM0_XBTxIQImbalance, bMaskDWord) >> 22) & 0x3FF; ++ ++ X = result[final_candidate][4]; ++ if ((X & 0x00000200) != 0) ++ X = X | 0xFFFFFC00; ++ TX1_A = (X * Oldval_1) >> 8; ++ //RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX1_A = 0x%lx\n", X, TX1_A)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x3FF, TX1_A); ++ PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(27), ((X* Oldval_1>>7) & 0x1)); ++ ++ Y = result[final_candidate][5]; ++ if ((Y & 0x00000200) != 0) ++ Y = Y | 0xFFFFFC00; ++ TX1_C = (Y * Oldval_1) >> 8; ++ //RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX1_C = 0x%lx\n", Y, TX1_C)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XDTxAFE, 0xF0000000, ((TX1_C&0x3C0)>>6)); ++ PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x003F0000, (TX1_C&0x3F)); ++ PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(25), ((Y* Oldval_1>>7) & 0x1)); ++ ++ if(bTxOnly) ++ return; ++ ++ reg = result[final_candidate][6]; ++ PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0x3FF, reg); ++ ++ reg = result[final_candidate][7] & 0x3F; ++ PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0xFC00, reg); ++ ++ reg = (result[final_candidate][7] >> 6) & 0xF; ++ PHY_SetBBReg(pAdapter, rOFDM0_AGCRSSITable, 0x0000F000, reg); ++ } ++} ++ ++static VOID ++_PHY_SaveADDARegisters( ++ IN PADAPTER pAdapter, ++ IN u32* ADDAReg, ++ IN u32* ADDABackup, ++ IN u32 RegisterNum ++ ) ++{ ++ u32 i; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("Save ADDA parameters.\n")); ++ for( i = 0 ; i < RegisterNum ; i++){ ++ ADDABackup[i] = PHY_QueryBBReg(pAdapter, ADDAReg[i], bMaskDWord); ++ } ++} ++ ++static VOID ++_PHY_SaveMACRegisters( ++ IN PADAPTER pAdapter, ++ IN u32* MACReg, ++ IN u32* MACBackup ++ ) ++{ ++ u32 i; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("Save MAC parameters.\n")); ++ for( i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){ ++ MACBackup[i] =rtw_read8(pAdapter, MACReg[i]); ++ } ++ MACBackup[i] = rtw_read32(pAdapter, MACReg[i]); ++ ++} ++ ++static VOID ++_PHY_ReloadADDARegisters( ++ IN PADAPTER pAdapter, ++ IN u32* ADDAReg, ++ IN u32* ADDABackup, ++ IN u32 RegiesterNum ++ ) ++{ ++ u32 i; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("Reload ADDA power saving parameters !\n")); ++ for(i = 0 ; i < RegiesterNum ; i++){ ++ PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, ADDABackup[i]); ++ } ++} ++ ++static VOID ++_PHY_ReloadMACRegisters( ++ IN PADAPTER pAdapter, ++ IN u32* MACReg, ++ IN u32* MACBackup ++ ) ++{ ++ u32 i; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("Reload MAC parameters !\n")); ++ for(i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){ ++ rtw_write8(pAdapter, MACReg[i], (u8)MACBackup[i]); ++ } ++ rtw_write32(pAdapter, MACReg[i], MACBackup[i]); ++} ++ ++static VOID ++_PHY_PathADDAOn( ++ IN PADAPTER pAdapter, ++ IN u32* ADDAReg, ++ IN BOOLEAN isPathAOn, ++ IN BOOLEAN is2T ++ ) ++{ ++ u32 pathOn; ++ u32 i; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("ADDA ON.\n")); ++ ++ pathOn = isPathAOn ? 0x04db25a4 : 0x0b1b25a4; ++ if(_FALSE == is2T){ ++ pathOn = 0x0bdb25a0; ++ PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, 0x0b1b25a0); ++ } ++ else{ ++ PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, pathOn); ++ } ++ ++ for( i = 1 ; i < IQK_ADDA_REG_NUM ; i++){ ++ PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, pathOn); ++ } ++ ++} ++ ++static VOID ++_PHY_MACSettingCalibration( ++ IN PADAPTER pAdapter, ++ IN u32* MACReg, ++ IN u32* MACBackup ++ ) ++{ ++ u32 i = 0; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("MAC settings for Calibration.\n")); ++ ++ rtw_write8(pAdapter, MACReg[i], 0x3F); ++ ++ for(i = 1 ; i < (IQK_MAC_REG_NUM - 1); i++){ ++ rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT3))); ++ } ++ rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT5))); ++ ++} ++ ++static VOID ++_PHY_PathAStandBy( ++ IN PADAPTER pAdapter ++ ) ++{ ++ //RTPRINT(FINIT, INIT_IQK, ("Path-A standby mode!\n")); ++ ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x0); ++ PHY_SetBBReg(pAdapter, 0x840, bMaskDWord, 0x00010000); ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000); ++} ++ ++static VOID ++_PHY_PIModeSwitch( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN PIMode ++ ) ++{ ++ u32 mode; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("BB Switch to %s mode!\n", (PIMode ? "PI" : "SI"))); ++ ++ mode = PIMode ? 0x01000100 : 0x01000000; ++ PHY_SetBBReg(pAdapter, 0x820, bMaskDWord, mode); ++ PHY_SetBBReg(pAdapter, 0x828, bMaskDWord, mode); ++} ++ ++/* ++return _FALSE => do IQK again ++*/ ++static BOOLEAN ++_PHY_SimularityCompare( ++ IN PADAPTER pAdapter, ++ IN int result[][8], ++ IN u8 c1, ++ IN u8 c2 ++ ) ++{ ++ u32 i, j, diff, SimularityBitMap, bound = 0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u8 final_candidate[2] = {0xFF, 0xFF}; //for path A and path B ++ BOOLEAN bResult = _TRUE, is2T = IS_92C_SERIAL( pHalData->VersionID); ++ ++ if(is2T) ++ bound = 8; ++ else ++ bound = 4; ++ ++ SimularityBitMap = 0; ++ ++ for( i = 0; i < bound; i++ ) ++ { ++ diff = (result[c1][i] > result[c2][i]) ? (result[c1][i] - result[c2][i]) : (result[c2][i] - result[c1][i]); ++ if (diff > MAX_TOLERANCE) ++ { ++ if((i == 2 || i == 6) && !SimularityBitMap) ++ { ++ if(result[c1][i]+result[c1][i+1] == 0) ++ final_candidate[(i/4)] = c2; ++ else if (result[c2][i]+result[c2][i+1] == 0) ++ final_candidate[(i/4)] = c1; ++ else ++ SimularityBitMap = SimularityBitMap|(1<dmpriv; ++ u32 i; ++ u8 PathAOK, PathBOK; ++ u32 ADDA_REG[IQK_ADDA_REG_NUM] = { ++ rFPGA0_XCD_SwitchControl, rBlue_Tooth, ++ rRx_Wait_CCA, rTx_CCK_RFON, ++ rTx_CCK_BBON, rTx_OFDM_RFON, ++ rTx_OFDM_BBON, rTx_To_Rx, ++ rTx_To_Tx, rRx_CCK, ++ rRx_OFDM, rRx_Wait_RIFS, ++ rRx_TO_Rx, rStandby, ++ rSleep, rPMPD_ANAEN }; ++ ++ u32 IQK_MAC_REG[IQK_MAC_REG_NUM] = { ++ REG_TXPAUSE, REG_BCN_CTRL, ++ REG_BCN_CTRL_1, REG_GPIO_MUXCFG}; ++ ++ u32 IQK_BB_REG_92C[IQK_BB_REG_NUM] = { ++ rOFDM0_TRxPathEnable, rOFDM0_TRMuxPar, ++ rFPGA0_XCD_RFInterfaceSW, rConfig_AntA, rConfig_AntB, ++ rFPGA0_XAB_RFInterfaceSW, rFPGA0_XA_RFInterfaceOE, ++ rFPGA0_XB_RFInterfaceOE, rFPGA0_RFMOD ++ }; ++ ++#if MP_DRIVER ++ const u32 retryCount = 9; ++#else ++ const u32 retryCount = 2; ++#endif ++ ++ // Note: IQ calibration must be performed after loading ++ // PHY_REG.txt , and radio_a, radio_b.txt ++ ++ u32 bbvalue; ++ ++ if(t==0) ++ { ++ bbvalue = PHY_QueryBBReg(pAdapter, rFPGA0_RFMOD, bMaskDWord); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_IQCalibrate()==>0x%08lx\n",bbvalue)); ++ ++ //RTPRINT(FINIT, INIT_IQK, ("IQ Calibration for %s\n", (is2T ? "2T2R" : "1T1R"))); ++ ++ // Save ADDA parameters, turn Path A ADDA on ++ _PHY_SaveADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup,IQK_ADDA_REG_NUM); ++ _PHY_SaveMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); ++ _PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM); ++ } ++ _PHY_PathADDAOn(pAdapter, ADDA_REG, _TRUE, is2T); ++ ++ if(t==0) ++ { ++ pdmpriv->bRfPiEnable = (u8)PHY_QueryBBReg(pAdapter, rFPGA0_XA_HSSIParameter1, BIT(8)); ++ } ++ ++ if(!pdmpriv->bRfPiEnable){ ++ // Switch BB to PI mode to do IQ Calibration. ++ _PHY_PIModeSwitch(pAdapter, _TRUE); ++ } ++ ++ PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, BIT24, 0x00); ++ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, bMaskDWord, 0x03a05600); ++ PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, bMaskDWord, 0x000800e4); ++ PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, bMaskDWord, 0x22204000); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0x01); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0x01); ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0x00); ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0x00); ++ ++ if(is2T) ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00010000); ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00010000); ++ } ++ ++ //MAC settings ++ _PHY_MACSettingCalibration(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); ++ ++ //Page B init ++ PHY_SetBBReg(pAdapter, rConfig_AntA, bMaskDWord, 0x00080000); ++ ++ if(is2T) ++ { ++ PHY_SetBBReg(pAdapter, rConfig_AntB, bMaskDWord, 0x00080000); ++ } ++ ++ // IQ calibration setting ++ //RTPRINT(FINIT, INIT_IQK, ("IQK setting!\n")); ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000); ++ PHY_SetBBReg(pAdapter, rTx_IQK, bMaskDWord, 0x01007c00); ++ PHY_SetBBReg(pAdapter, rRx_IQK, bMaskDWord, 0x01004800); ++ ++ for(i = 0 ; i < retryCount ; i++){ ++ PathAOK = _PHY_PathA_IQK(pAdapter, is2T); ++ if(PathAOK == 0x03){ ++ DBG_8192C("Path A IQK Success!!\n"); ++ result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16; ++ result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16; ++ result[t][2] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord)&0x3FF0000)>>16; ++ result[t][3] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord)&0x3FF0000)>>16; ++ break; ++ } ++ else if (i == (retryCount-1) && PathAOK == 0x01) //Tx IQK OK ++ { ++ DBG_8192C("Path A IQK Only Tx Success!!\n"); ++ ++ result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16; ++ result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16; ++ } ++ } ++ ++ if(0x00 == PathAOK){ ++ DBG_8192C("Path A IQK failed!!\n"); ++ } ++ ++ if(is2T){ ++ _PHY_PathAStandBy(pAdapter); ++ ++ // Turn Path B ADDA on ++ _PHY_PathADDAOn(pAdapter, ADDA_REG, _FALSE, is2T); ++ ++ for(i = 0 ; i < retryCount ; i++){ ++ PathBOK = _PHY_PathB_IQK(pAdapter); ++ if(PathBOK == 0x03){ ++ DBG_8192C("Path B IQK Success!!\n"); ++ result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16; ++ result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16; ++ result[t][6] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord)&0x3FF0000)>>16; ++ result[t][7] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord)&0x3FF0000)>>16; ++ break; ++ } ++ else if (i == (retryCount - 1) && PathBOK == 0x01) //Tx IQK OK ++ { ++ DBG_8192C("Path B Only Tx IQK Success!!\n"); ++ result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16; ++ result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16; ++ } ++ } ++ ++ if(0x00 == PathBOK){ ++ DBG_8192C("Path B IQK failed!!\n"); ++ } ++ } ++ ++ //Back to BB mode, load original value ++ //RTPRINT(FINIT, INIT_IQK, ("IQK:Back to BB mode, load original value!\n")); ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0); ++ ++ if(t!=0) ++ { ++ if(!pdmpriv->bRfPiEnable){ ++ // Switch back BB to SI mode after finish IQ Calibration. ++ _PHY_PIModeSwitch(pAdapter, _FALSE); ++ } ++ ++ // Reload ADDA power saving parameters ++ _PHY_ReloadADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup, IQK_ADDA_REG_NUM); ++ ++ // Reload MAC parameters ++ _PHY_ReloadMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup); ++ ++ // Reload BB parameters ++ _PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM); ++ ++ // Restore RX initial gain ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00032ed3); ++ if(is2T){ ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00032ed3); ++ } ++ ++ //load 0xe30 IQC default value ++ PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00); ++ PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00); ++ ++ } ++ //RTPRINT(FINIT, INIT_IQK, ("_PHY_IQCalibrate() <==\n")); ++ ++} ++ ++ ++static VOID ++_PHY_LCCalibrate( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN is2T ++ ) ++{ ++ u8 tmpReg; ++ u32 RF_Amode = 0, RF_Bmode = 0, LC_Cal; ++ ++ //Check continuous TX and Packet TX ++ tmpReg = rtw_read8(pAdapter, 0xd03); ++ ++ if((tmpReg&0x70) != 0) //Deal with contisuous TX case ++ rtw_write8(pAdapter, 0xd03, tmpReg&0x8F); //disable all continuous TX ++ else // Deal with Packet TX case ++ rtw_write8(pAdapter, REG_TXPAUSE, 0xFF); // block all queues ++ ++ if((tmpReg&0x70) != 0) ++ { ++ //1. Read original RF mode ++ //Path-A ++ RF_Amode = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits); ++ ++ //Path-B ++ if(is2T) ++ RF_Bmode = PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits); ++ ++ //2. Set RF mode = standby mode ++ //Path-A ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, (RF_Amode&0x8FFFF)|0x10000); ++ ++ //Path-B ++ if(is2T) ++ PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, (RF_Bmode&0x8FFFF)|0x10000); ++ } ++ ++ //3. Read RF reg18 ++ LC_Cal = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits); ++ ++ //4. Set LC calibration begin ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits, LC_Cal|0x08000); ++ ++ #ifdef CONFIG_LONG_DELAY_ISSUE ++ rtw_msleep_os(100); ++ #else ++ rtw_mdelay_os(100); ++ #endif ++ ++ //Restore original situation ++ if((tmpReg&0x70) != 0) //Deal with contisuous TX case ++ { ++ //Path-A ++ rtw_write8(pAdapter, 0xd03, tmpReg); ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, RF_Amode); ++ ++ //Path-B ++ if(is2T) ++ PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, RF_Bmode); ++ } ++ else // Deal with Packet TX case ++ { ++ rtw_write8(pAdapter, REG_TXPAUSE, 0x00); ++ } ++ ++} ++ ++ ++//Analog Pre-distortion calibration ++#define APK_BB_REG_NUM 8 ++#define APK_CURVE_REG_NUM 4 ++#define PATH_NUM 2 ++ ++static VOID ++_PHY_APCalibrate( ++ IN PADAPTER pAdapter, ++ IN char delta, ++ IN BOOLEAN is2T ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ u32 regD[PATH_NUM]; ++ u32 tmpReg, index, offset, i, apkbound; ++ u8 path, pathbound = PATH_NUM; ++ u32 BB_backup[APK_BB_REG_NUM]; ++ u32 BB_REG[APK_BB_REG_NUM] = { ++ rFPGA1_TxBlock, rOFDM0_TRxPathEnable, ++ rFPGA0_RFMOD, rOFDM0_TRMuxPar, ++ rFPGA0_XCD_RFInterfaceSW, rFPGA0_XAB_RFInterfaceSW, ++ rFPGA0_XA_RFInterfaceOE, rFPGA0_XB_RFInterfaceOE }; ++ u32 BB_AP_MODE[APK_BB_REG_NUM] = { ++ 0x00000020, 0x00a05430, 0x02040000, ++ 0x000800e4, 0x00204000 }; ++ u32 BB_normal_AP_MODE[APK_BB_REG_NUM] = { ++ 0x00000020, 0x00a05430, 0x02040000, ++ 0x000800e4, 0x22204000 }; ++ ++ u32 AFE_backup[IQK_ADDA_REG_NUM]; ++ u32 AFE_REG[IQK_ADDA_REG_NUM] = { ++ rFPGA0_XCD_SwitchControl, rBlue_Tooth, ++ rRx_Wait_CCA, rTx_CCK_RFON, ++ rTx_CCK_BBON, rTx_OFDM_RFON, ++ rTx_OFDM_BBON, rTx_To_Rx, ++ rTx_To_Tx, rRx_CCK, ++ rRx_OFDM, rRx_Wait_RIFS, ++ rRx_TO_Rx, rStandby, ++ rSleep, rPMPD_ANAEN }; ++ ++ u32 MAC_backup[IQK_MAC_REG_NUM]; ++ u32 MAC_REG[IQK_MAC_REG_NUM] = { ++ REG_TXPAUSE, REG_BCN_CTRL, ++ REG_BCN_CTRL_1, REG_GPIO_MUXCFG}; ++ ++ u32 APK_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = { ++ {0x0852c, 0x1852c, 0x5852c, 0x1852c, 0x5852c}, ++ {0x2852e, 0x0852e, 0x3852e, 0x0852e, 0x0852e} ++ }; ++ ++ u32 APK_normal_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = { ++ {0x0852c, 0x0a52c, 0x3a52c, 0x5a52c, 0x5a52c}, //path settings equal to path b settings ++ {0x0852c, 0x0a52c, 0x5a52c, 0x5a52c, 0x5a52c} ++ }; ++ ++ u32 APK_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = { ++ {0x52019, 0x52014, 0x52013, 0x5200f, 0x5208d}, ++ {0x5201a, 0x52019, 0x52016, 0x52033, 0x52050} ++ }; ++ ++ u32 APK_normal_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = { ++ {0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}, //path settings equal to path b settings ++ {0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a} ++ }; ++#if 0 ++ u32 APK_RF_value_A[PATH_NUM][APK_BB_REG_NUM] = { ++ {0x1adb0, 0x1adb0, 0x1ada0, 0x1ad90, 0x1ad80}, ++ {0x00fb0, 0x00fb0, 0x00fa0, 0x00f90, 0x00f80} ++ }; ++#endif ++ u32 AFE_on_off[PATH_NUM] = { ++ 0x04db25a4, 0x0b1b25a4}; //path A on path B off / path A off path B on ++ ++ u32 APK_offset[PATH_NUM] = { ++ rConfig_AntA, rConfig_AntB}; ++ ++ u32 APK_normal_offset[PATH_NUM] = { ++ rConfig_Pmpd_AntA, rConfig_Pmpd_AntB}; ++ ++ u32 APK_value[PATH_NUM] = { ++ 0x92fc0000, 0x12fc0000}; ++ ++ u32 APK_normal_value[PATH_NUM] = { ++ 0x92680000, 0x12680000}; ++ ++ char APK_delta_mapping[APK_BB_REG_NUM][13] = { ++ {-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, ++ {-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, ++ {-6, -4, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6}, ++ {-1, -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6}, ++ {-11, -9, -7, -5, -3, -1, 0, 0, 0, 0, 0, 0, 0} ++ }; ++ ++ u32 APK_normal_setting_value_1[13] = { ++ 0x01017018, 0xf7ed8f84, 0x1b1a1816, 0x2522201e, 0x322e2b28, ++ 0x433f3a36, 0x5b544e49, 0x7b726a62, 0xa69a8f84, 0xdfcfc0b3, ++ 0x12680000, 0x00880000, 0x00880000 ++ }; ++ ++ u32 APK_normal_setting_value_2[16] = { ++ 0x01c7021d, 0x01670183, 0x01000123, 0x00bf00e2, 0x008d00a3, ++ 0x0068007b, 0x004d0059, 0x003a0042, 0x002b0031, 0x001f0025, ++ 0x0017001b, 0x00110014, 0x000c000f, 0x0009000b, 0x00070008, ++ 0x00050006 ++ }; ++ ++ u32 APK_result[PATH_NUM][APK_BB_REG_NUM]; //val_1_1a, val_1_2a, val_2a, val_3a, val_4a ++ //u32 AP_curve[PATH_NUM][APK_CURVE_REG_NUM]; ++ ++ int BB_offset, delta_V, delta_offset; ++ ++#if (MP_DRIVER == 1) ++ PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; ++ ++ pMptCtx->APK_bound[0] = 45; ++ pMptCtx->APK_bound[1] = 52; ++#endif ++ ++ //RTPRINT(FINIT, INIT_IQK, ("==>PHY_APCalibrate() delta %d\n", delta)); ++ ++ //RTPRINT(FINIT, INIT_IQK, ("AP Calibration for %s %s\n", (is2T ? "2T2R" : "1T1R"), (isNormal ? "Normal chip" : "Test chip"))); ++ ++ if(!is2T) ++ pathbound = 1; ++ ++ //2 FOR NORMAL CHIP SETTINGS ++ ++// Temporarily do not allow normal driver to do the following settings because these offset ++// and value will cause RF internal PA to be unpredictably disabled by HW, such that RF Tx signal ++// will disappear after disable/enable card many times on 88CU. RF SD and DD have not find the ++// root cause, so we remove these actions temporarily. Added by tynli and SD3 Allen. 2010.05.31. ++#if (MP_DRIVER != 1) ++ return; ++#endif ++ ++ //settings adjust for normal chip ++ for(index = 0; index < PATH_NUM; index ++) ++ { ++ APK_offset[index] = APK_normal_offset[index]; ++ APK_value[index] = APK_normal_value[index]; ++ AFE_on_off[index] = 0x6fdb25a4; ++ } ++ ++ for(index = 0; index < APK_BB_REG_NUM; index ++) ++ { ++ for(path = 0; path < pathbound; path++) ++ { ++ APK_RF_init_value[path][index] = APK_normal_RF_init_value[path][index]; ++ APK_RF_value_0[path][index] = APK_normal_RF_value_0[path][index]; ++ } ++ BB_AP_MODE[index] = BB_normal_AP_MODE[index]; ++ } ++ ++ apkbound = 6; ++ ++ //save BB default value ++ for(index = 0; index < APK_BB_REG_NUM ; index++) ++ { ++ if(index == 0) //skip ++ continue; ++ BB_backup[index] = PHY_QueryBBReg(pAdapter, BB_REG[index], bMaskDWord); ++ } ++ ++ //save MAC default value ++ _PHY_SaveMACRegisters(pAdapter, MAC_REG, MAC_backup); ++ ++ //save AFE default value ++ _PHY_SaveADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM); ++ ++ for(path = 0; path < pathbound; path++) ++ { ++ if(path == RF_PATH_A) ++ { ++ //path A APK ++ //load APK setting ++ //path-A ++ offset = rPdp_AntA; ++ for(index = 0; index < 11; index ++) ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ ++ PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000); ++ ++ offset = rConfig_AntA; ++ for(; index < 13; index ++) ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ ++ //page-B1 ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000); ++ ++ //path A ++ offset = rPdp_AntA; ++ for(index = 0; index < 16; index++) ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); ++ } ++ else if(path == RF_PATH_B) ++ { ++ //path B APK ++ //load APK setting ++ //path-B ++ offset = rPdp_AntB; ++ for(index = 0; index < 10; index ++) ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntA, bMaskDWord, 0x12680000); ++ ++ PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000); ++ ++ offset = rConfig_AntA; ++ index = 11; ++ for(; index < 13; index ++) //offset 0xb68, 0xb6c ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ ++ //page-B1 ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000); ++ ++ //path B ++ offset = 0xb60; ++ for(index = 0; index < 16; index++) ++ { ++ PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); ++ ++ offset += 0x04; ++ } ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); ++ } ++ ++ //save RF default value ++ regD[path] = PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask); ++ ++ //Path A AFE all on, path B AFE All off or vise versa ++ for(index = 0; index < IQK_ADDA_REG_NUM ; index++) ++ PHY_SetBBReg(pAdapter, AFE_REG[index], bMaskDWord, AFE_on_off[path]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xe70 %x\n", PHY_QueryBBReg(pAdapter, 0xe70, bMaskDWord))); ++ ++ //BB to AP mode ++ if(path == 0) ++ { ++ for(index = 0; index < APK_BB_REG_NUM ; index++) ++ { ++ if(index == 0) //skip ++ continue; ++ else if (index < 5) ++ PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_AP_MODE[index]); ++ else if (BB_REG[index] == 0x870) ++ PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]|BIT10|BIT26); ++ else ++ PHY_SetBBReg(pAdapter, BB_REG[index], BIT10, 0x0); ++ } ++ PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00); ++ PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00); ++ } ++ else //path B ++ { ++ PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x01008c00); ++ PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x01008c00); ++ } ++ ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x800 %x\n", PHY_QueryBBReg(pAdapter, 0x800, bMaskDWord))); ++ ++ //MAC settings ++ _PHY_MACSettingCalibration(pAdapter, MAC_REG, MAC_backup); ++ ++ if(path == RF_PATH_A) //Path B to standby mode ++ { ++ PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bRFRegOffsetMask, 0x10000); ++ } ++ else //Path A to standby mode ++ { ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bRFRegOffsetMask, 0x10000); ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f); ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20103); ++ } ++ ++ delta_offset = ((delta+14)/2); ++ if(delta_offset < 0) ++ delta_offset = 0; ++ else if (delta_offset > 12) ++ delta_offset = 12; ++ ++ //AP calibration ++ for(index = 0; index < APK_BB_REG_NUM; index++) ++ { ++ if(index != 1) //only DO PA11+PAD01001, AP RF setting ++ continue; ++ ++ tmpReg = APK_RF_init_value[path][index]; ++#if 1 ++ if(!pdmpriv->bAPKThermalMeterIgnore) ++ { ++ BB_offset = (tmpReg & 0xF0000) >> 16; ++ ++ if(!(tmpReg & BIT15)) //sign bit 0 ++ { ++ BB_offset = -BB_offset; ++ } ++ ++ delta_V = APK_delta_mapping[index][delta_offset]; ++ ++ BB_offset += delta_V; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() APK num %d delta_V %d delta_offset %d\n", index, delta_V, delta_offset)); ++ ++ if(BB_offset < 0) ++ { ++ tmpReg = tmpReg & (~BIT15); ++ BB_offset = -BB_offset; ++ } ++ else ++ { ++ tmpReg = tmpReg | BIT15; ++ } ++ tmpReg = (tmpReg & 0xFFF0FFFF) | (BB_offset << 16); ++ } ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ if(IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)) ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x894ae); ++ else ++#endif ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x8992e); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xc %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xc, bMaskDWord))); ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_AC, bRFRegOffsetMask, APK_RF_value_0[path][index]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x0 %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0x0, bMaskDWord))); ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, tmpReg); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xd %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xd, bMaskDWord))); ++ ++ // PA11+PAD01111, one shot ++ i = 0; ++ do ++ { ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80000000); ++ { ++ PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[0]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord))); ++ rtw_mdelay_os(3); ++ PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[1]); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord))); ++ #ifdef CONFIG_LONG_DELAY_ISSUE ++ rtw_msleep_os(20); ++ #else ++ rtw_mdelay_os(20); ++ #endif ++ } ++ PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000); ++ ++ if(path == RF_PATH_A) ++ tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0x03E00000); ++ else ++ tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0xF8000000); ++ //RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xbd8[25:21] %x\n", tmpReg)); ++ ++ i++; ++ } ++ while(tmpReg > apkbound && i < 4); ++ ++ APK_result[path][index] = tmpReg; ++ } ++ } ++ ++ //reload MAC default value ++ _PHY_ReloadMACRegisters(pAdapter, MAC_REG, MAC_backup); ++ ++ //reload BB default value ++ for(index = 0; index < APK_BB_REG_NUM ; index++) ++ { ++ if(index == 0) //skip ++ continue; ++ PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]); ++ } ++ ++ //reload AFE default value ++ _PHY_ReloadADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM); ++ ++ //reload RF path default value ++ for(path = 0; path < pathbound; path++) ++ { ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, regD[path]); ++ if(path == RF_PATH_B) ++ { ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f); ++ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20101); ++ } ++ ++ //note no index == 0 ++ if (APK_result[path][1] > 6) ++ APK_result[path][1] = 6; ++ //RTPRINT(FINIT, INIT_IQK, ("apk path %d result %d 0x%x \t", path, 1, APK_result[path][1])); ++ } ++ ++ //RTPRINT(FINIT, INIT_IQK, ("\n")); ++ ++ ++ for(path = 0; path < pathbound; path++) ++ { ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G1_G4, bRFRegOffsetMask, ++ ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (APK_result[path][1] << 5) | APK_result[path][1])); ++ if(path == RF_PATH_A) ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, ++ ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x00 << 5) | 0x05)); ++ else ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, ++ ((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x02 << 5) | 0x05)); ++ PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G9_G11, bRFRegOffsetMask, ++ ((0x08 << 15) | (0x08 << 10) | (0x08 << 5) | 0x08)); ++ } ++ ++ pdmpriv->bAPKdone = _TRUE; ++ ++ //RTPRINT(FINIT, INIT_IQK, ("<==PHY_APCalibrate()\n")); ++} ++ ++static VOID _PHY_SetRFPathSwitch( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bMain, ++ IN BOOLEAN is2T ++ ) ++{ ++ u8 u1bTmp; ++ ++ if(!pAdapter->hw_init_completed) ++ { ++ u1bTmp = rtw_read8(pAdapter, REG_LEDCFG2) | BIT7; ++ rtw_write8(pAdapter, REG_LEDCFG2, u1bTmp); ++ //PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); ++ } ++ ++ if(is2T) ++ { ++ if(bMain) ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x1); //92C_Path_A ++ else ++ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x2); //BT ++ } ++ else ++ { ++ ++ if(bMain) ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x2); //Main ++ else ++ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x1); //Aux ++ } ++ ++} ++ ++//return value TRUE => Main; FALSE => Aux ++ ++static BOOLEAN _PHY_QueryRFPathSwitch( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN is2T ++ ) ++{ ++// if(is2T) ++// return _TRUE; ++ ++ if(!pAdapter->hw_init_completed) ++ { ++ PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01); ++ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); ++ } ++ ++ if(is2T) ++ { ++ if(PHY_QueryBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6) == 0x01) ++ return _TRUE; ++ else ++ return _FALSE; ++ } ++ else ++ { ++ if(PHY_QueryBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300) == 0x02) ++ return _TRUE; ++ else ++ return _FALSE; ++ } ++} ++ ++VOID ++rtl8192c_PHY_IQCalibrate( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bReCovery ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ s32 result[4][8]; //last is final result ++ u8 i, final_candidate; ++ BOOLEAN bPathAOK, bPathBOK; ++ s32 RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC, RegTmp = 0; ++ BOOLEAN is12simular, is13simular, is23simular; ++ BOOLEAN bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE; ++ u32 IQK_BB_REG_92C[IQK_BB_REG_NUM] = { ++ rOFDM0_XARxIQImbalance, rOFDM0_XBRxIQImbalance, ++ rOFDM0_ECCAThreshold, rOFDM0_AGCRSSITable, ++ rOFDM0_XATxIQImbalance, rOFDM0_XBTxIQImbalance, ++ rOFDM0_XCTxAFE, rOFDM0_XDTxAFE, ++ rOFDM0_RxIQExtAnta}; ++ ++ ++#if MP_DRIVER == 1 ++ bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx; ++ bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone; ++ bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression; ++#endif ++ ++ //ignore IQK when continuous Tx ++ if(bStartContTx || bSingleTone || bCarrierSuppression) ++ return; ++ ++#if DISABLE_BB_RF ++ return; ++#endif ++ ++ if(bReCovery) ++ { ++ _PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9); ++ return; ++ } ++ DBG_8192C("IQK:Start!!!\n"); ++ ++ for(i = 0; i < 8; i++) ++ { ++ result[0][i] = 0; ++ result[1][i] = 0; ++ result[2][i] = 0; ++ result[3][i] = 0; ++ } ++ final_candidate = 0xff; ++ bPathAOK = _FALSE; ++ bPathBOK = _FALSE; ++ is12simular = _FALSE; ++ is23simular = _FALSE; ++ is13simular = _FALSE; ++ ++ for (i=0; i<3; i++) ++ { ++ if(IS_92C_SERIAL( pHalData->VersionID)){ ++ _PHY_IQCalibrate(pAdapter, result, i, _TRUE); ++ } ++ else{ ++ // For 88C 1T1R ++ _PHY_IQCalibrate(pAdapter, result, i, _FALSE); ++ } ++ ++ if(i == 1) ++ { ++ is12simular = _PHY_SimularityCompare(pAdapter, result, 0, 1); ++ if(is12simular) ++ { ++ final_candidate = 0; ++ break; ++ } ++ } ++ ++ if(i == 2) ++ { ++ is13simular = _PHY_SimularityCompare(pAdapter, result, 0, 2); ++ if(is13simular) ++ { ++ final_candidate = 0; ++ break; ++ } ++ ++ is23simular = _PHY_SimularityCompare(pAdapter, result, 1, 2); ++ if(is23simular) ++ final_candidate = 1; ++ else ++ { ++ for(i = 0; i < 8; i++) ++ RegTmp += result[3][i]; ++ ++ if(RegTmp != 0) ++ final_candidate = 3; ++ else ++ final_candidate = 0xFF; ++ } ++ } ++ } ++ ++ for (i=0; i<4; i++) ++ { ++ RegE94 = result[i][0]; ++ RegE9C = result[i][1]; ++ RegEA4 = result[i][2]; ++ RegEAC = result[i][3]; ++ RegEB4 = result[i][4]; ++ RegEBC = result[i][5]; ++ RegEC4 = result[i][6]; ++ RegECC = result[i][7]; ++ //RTPRINT(FINIT, INIT_IQK, ("IQK: RegE94=%lx RegE9C=%lx RegEA4=%lx RegEAC=%lx RegEB4=%lx RegEBC=%lx RegEC4=%lx RegECC=%lx\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC)); ++ } ++ ++ if(final_candidate != 0xff) ++ { ++ pdmpriv->RegE94 = RegE94 = result[final_candidate][0]; ++ pdmpriv->RegE9C = RegE9C = result[final_candidate][1]; ++ RegEA4 = result[final_candidate][2]; ++ RegEAC = result[final_candidate][3]; ++ pdmpriv->RegEB4 = RegEB4 = result[final_candidate][4]; ++ pdmpriv->RegEBC = RegEBC = result[final_candidate][5]; ++ RegEC4 = result[final_candidate][6]; ++ RegECC = result[final_candidate][7]; ++ DBG_8192C("IQK: final_candidate is %x\n", final_candidate); ++ DBG_8192C("IQK: RegE94=%x RegE9C=%x RegEA4=%x RegEAC=%x RegEB4=%x RegEBC=%x RegEC4=%x RegECC=%x\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC); ++ bPathAOK = bPathBOK = _TRUE; ++ } ++ else ++ { ++ RegE94 = RegEB4 = pdmpriv->RegE94 = pdmpriv->RegEB4 = 0x100; //X default value ++ RegE9C = RegEBC = pdmpriv->RegE9C = pdmpriv->RegEBC = 0x0; //Y default value ++ } ++ ++ if((RegE94 != 0)/*&&(RegEA4 != 0)*/) ++ _PHY_PathAFillIQKMatrix(pAdapter, bPathAOK, result, final_candidate, (RegEA4 == 0)); ++ ++ if(IS_92C_SERIAL( pHalData->VersionID)){ ++ if((RegEB4 != 0)/*&&(RegEC4 != 0)*/) ++ _PHY_PathBFillIQKMatrix(pAdapter, bPathBOK, result, final_candidate, (RegEC4 == 0)); ++ } ++ ++ _PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9); ++ ++} ++ ++ ++VOID ++rtl8192c_PHY_LCCalibrate( ++ IN PADAPTER pAdapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct mlme_ext_priv *pmlmeext = &pAdapter->mlmeextpriv; ++ BOOLEAN bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE; ++ ++#if MP_DRIVER == 1 ++ bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx; ++ bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone; ++ bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression; ++#endif ++ ++#if DISABLE_BB_RF ++ return; ++#endif ++ ++ //ignore IQK when continuous Tx ++ if(bStartContTx || bSingleTone || bCarrierSuppression) ++ return; ++ ++ if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS) ++ return; ++ ++ if(IS_92C_SERIAL( pHalData->VersionID)){ ++ _PHY_LCCalibrate(pAdapter, _TRUE); ++ } ++ else{ ++ // For 88C 1T1R ++ _PHY_LCCalibrate(pAdapter, _FALSE); ++ } ++} ++ ++VOID ++rtl8192c_PHY_APCalibrate( ++ IN PADAPTER pAdapter, ++ IN char delta ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ //default disable APK, because Tx NG issue, suggest by Jenyu, 2011.11.25 ++ return; ++ ++#if DISABLE_BB_RF ++ return; ++#endif ++ ++ if(pdmpriv->bAPKdone) ++ return; ++ ++ if(IS_92C_SERIAL( pHalData->VersionID)){ ++ _PHY_APCalibrate(pAdapter, delta, _TRUE); ++ } ++ else{ ++ // For 88C 1T1R ++ _PHY_APCalibrate(pAdapter, delta, _FALSE); ++ } ++} ++ ++VOID rtl8192c_PHY_SetRFPathSwitch( ++ IN PADAPTER pAdapter, ++ IN BOOLEAN bMain ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++#if DISABLE_BB_RF ++ return; ++#endif ++ ++ if(IS_92C_SERIAL( pHalData->VersionID)){ ++ _PHY_SetRFPathSwitch(pAdapter, bMain, _TRUE); ++ } ++ else{ ++ // For 88C 1T1R ++ _PHY_SetRFPathSwitch(pAdapter, bMain, _FALSE); ++ } ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c +new file mode 100644 +index 000000000000..a3cd013cf04a +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c +@@ -0,0 +1,1030 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/****************************************************************************** ++ * ++ * ++ * Module: rtl8192c_rf6052.c ( Source C File) ++ * ++ * Note: Provide RF 6052 series relative API. ++ * ++ * Function: ++ * ++ * Export: ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * ++ * 09/25/2008 MHC Create initial version. ++ * 11/05/2008 MHC Add API for tw power setting. ++ * ++ * ++******************************************************************************/ ++ ++#define _RTL8192C_RF6052_C_ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++/*---------------------------Define Local Constant---------------------------*/ ++// Define local structure for debug!!!!! ++typedef struct RF_Shadow_Compare_Map { ++ // Shadow register value ++ u32 Value; ++ // Compare or not flag ++ u8 Compare; ++ // Record If it had ever modified unpredicted ++ u8 ErrorOrNot; ++ // Recorver Flag ++ u8 Recorver; ++ // ++ u8 Driver_Write; ++}RF_SHADOW_T; ++/*---------------------------Define Local Constant---------------------------*/ ++ ++ ++/*------------------------Define global variable-----------------------------*/ ++/*------------------------Define global variable-----------------------------*/ ++ ++ ++/*------------------------Define local variable------------------------------*/ ++// 2008/11/20 MH For Debug only, RF ++//static RF_SHADOW_T RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG] = {0}; ++static RF_SHADOW_T RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG]; ++/*------------------------Define local variable------------------------------*/ ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: RF_ChangeTxPath ++ * ++ * Overview: For RL6052, we must change some RF settign for 1T or 2T. ++ * ++ * Input: u2Byte DataRate // 0x80-8f, 0x90-9f ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 09/25/2008 MHC Create Version 0. ++ * Firmwaer support the utility later. ++ * ++ *---------------------------------------------------------------------------*/ ++void rtl8192c_RF_ChangeTxPath( IN PADAPTER Adapter, ++ IN u16 DataRate) ++{ ++// We do not support gain table change inACUT now !!!! Delete later !!! ++#if 0//(RTL92SE_FPGA_VERIFY == 0) ++ static u1Byte RF_Path_Type = 2; // 1 = 1T 2= 2T ++ static u4Byte tx_gain_tbl1[6] ++ = {0x17f50, 0x11f40, 0x0cf30, 0x08720, 0x04310, 0x00100}; ++ static u4Byte tx_gain_tbl2[6] ++ = {0x15ea0, 0x10e90, 0x0c680, 0x08250, 0x04040, 0x00030}; ++ u1Byte i; ++ ++ if (RF_Path_Type == 2 && (DataRate&0xF) <= 0x7) ++ { ++ // Set TX SYNC power G2G3 loop filter ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G2, bRFRegOffsetMask, 0x0f000); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G3, bRFRegOffsetMask, 0xeacf1); ++ ++ // Change TX AGC gain table ++ for (i = 0; i < 6; i++) ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TX_AGC, bRFRegOffsetMask, tx_gain_tbl1[i]); ++ ++ // Set PA to high value ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G2, bRFRegOffsetMask, 0x01e39); ++ } ++ else if (RF_Path_Type == 1 && (DataRate&0xF) >= 0x8) ++ { ++ // Set TX SYNC power G2G3 loop filter ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G2, bRFRegOffsetMask, 0x04440); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G3, bRFRegOffsetMask, 0xea4f1); ++ ++ // Change TX AGC gain table ++ for (i = 0; i < 6; i++) ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TX_AGC, bRFRegOffsetMask, tx_gain_tbl2[i]); ++ ++ // Set PA low gain ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, ++ RF_TXPA_G2, bRFRegOffsetMask, 0x01e19); ++ } ++#endif ++ ++} /* RF_ChangeTxPath */ ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHY_RF6052SetBandwidth() ++ * ++ * Overview: This function is called by SetBWModeCallback8190Pci() only ++ * ++ * Input: PADAPTER Adapter ++ * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Note: For RF type 0222D ++ *---------------------------------------------------------------------------*/ ++VOID ++rtl8192c_PHY_RF6052SetBandwidth( ++ IN PADAPTER Adapter, ++ IN HT_CHANNEL_WIDTH Bandwidth) //20M or 40M ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ switch(Bandwidth) ++ { ++ case HT_CHANNEL_WIDTH_20: ++ pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400); ++ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]); ++ break; ++ ++ case HT_CHANNEL_WIDTH_40: ++ pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff)); ++ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]); ++ break; ++ ++ default: ++ //RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth )); ++ break; ++ } ++ ++} ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: PHY_RF6052SetCckTxPower ++ * ++ * Overview: ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/05/2008 MHC Simulate 8192series.. ++ * ++ *---------------------------------------------------------------------------*/ ++ ++VOID ++rtl8192c_PHY_RF6052SetCckTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerlevel) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ //PMGNT_INFO pMgntInfo=&Adapter->MgntInfo; ++ u32 TxAGC[2]={0, 0}, tmpval=0; ++ BOOLEAN TurboScanOff = _FALSE; ++ u8 idx1, idx2; ++ u8* ptr; ++ ++ // 2010/10/18 MH Accorsing to SD3 eechou's suggestion, we need to disable turbo scan for RU. ++ // Otherwise, external PA will be broken if power index > 0x20. ++#ifdef CONFIG_USB_HCI ++ if (pHalData->EEPROMRegulatory != 0 || pHalData->ExternalPA) ++#else ++ if (pHalData->EEPROMRegulatory != 0) ++#endif ++ { ++ //DbgPrint("TurboScanOff=1 EEPROMRegulatory=%d ExternalPA=%d\n", pHalData->EEPROMRegulatory, pHalData->ExternalPA); ++ TurboScanOff = _TRUE; ++ } ++ ++ if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS) ++ { ++ TxAGC[RF_PATH_A] = 0x3f3f3f3f; ++ TxAGC[RF_PATH_B] = 0x3f3f3f3f; ++ ++ TurboScanOff = _TRUE;//disable turbo scan ++ ++ if(TurboScanOff) ++ { ++ for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++) ++ { ++ TxAGC[idx1] = ++ pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) | ++ (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24); ++#ifdef CONFIG_USB_HCI ++ // 2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20. ++ if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA) ++ TxAGC[idx1] = 0x20; ++#endif ++ } ++ } ++ } ++ else ++ { ++// 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. ++// Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. ++// In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. ++ if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) ++ { ++ TxAGC[RF_PATH_A] = 0x10101010; ++ TxAGC[RF_PATH_B] = 0x10101010; ++ } ++ else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) ++ { ++ TxAGC[RF_PATH_A] = 0x00000000; ++ TxAGC[RF_PATH_B] = 0x00000000; ++ } ++ else ++ { ++ for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++) ++ { ++ TxAGC[idx1] = ++ pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) | ++ (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24); ++ } ++ ++ if(pHalData->EEPROMRegulatory==0) ++ { ++ tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][6]) + ++ (pHalData->MCSTxPowerLevelOriginalOffset[0][7]<<8); ++ TxAGC[RF_PATH_A] += tmpval; ++ ++ tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][14]) + ++ (pHalData->MCSTxPowerLevelOriginalOffset[0][15]<<24); ++ TxAGC[RF_PATH_B] += tmpval; ++ } ++ } ++ } ++ ++ for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++) ++ { ++ ptr = (u8*)(&(TxAGC[idx1])); ++ for(idx2=0; idx2<4; idx2++) ++ { ++ if(*ptr > RF6052_MAX_TX_PWR) ++ *ptr = RF6052_MAX_TX_PWR; ++ ptr++; ++ } ++ } ++ ++ // rf-A cck tx power ++ tmpval = TxAGC[RF_PATH_A]&0xff; ++ PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval); ++ //RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_A_CCK1_Mcs32)); ++ tmpval = TxAGC[RF_PATH_A]>>8; ++ PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); ++ //RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_B_CCK11_A_CCK2_11)); ++ ++ // rf-B cck tx power ++ tmpval = TxAGC[RF_PATH_B]>>24; ++ PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval); ++ //RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_B_CCK11_A_CCK2_11)); ++ tmpval = TxAGC[RF_PATH_B]&0x00ffffff; ++ PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval); ++ //RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", ++ // tmpval, rTxAGC_B_CCK1_55_Mcs32)); ++ ++} /* PHY_RF6052SetCckTxPower */ ++ ++// ++// powerbase0 for OFDM rates ++// powerbase1 for HT MCS rates ++// ++static void getPowerBase( ++ IN PADAPTER Adapter, ++ IN u8* pPowerLevel, ++ IN u8 Channel, ++ IN OUT u32* OfdmBase, ++ IN OUT u32* MCSBase ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 powerBase0, powerBase1; ++ u8 Legacy_pwrdiff=0; ++ s8 HT20_pwrdiff=0; ++ u8 i, powerlevel[2]; ++ ++ for(i=0; i<2; i++) ++ { ++ powerlevel[i] = pPowerLevel[i]; ++ Legacy_pwrdiff = pHalData->TxPwrLegacyHtDiff[i][Channel-1]; ++ powerBase0 = powerlevel[i] + Legacy_pwrdiff; ++ ++ powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0; ++ *(OfdmBase+i) = powerBase0; ++ //RTPRINT(FPHY, PHY_TXPWR, (" [OFDM power base index rf(%c) = 0x%x]\n", ((i==0)?'A':'B'), *(OfdmBase+i))); ++ } ++ ++ for(i=0; i<2; i++) ++ { ++ //Check HT20 to HT40 diff ++ if(pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20) ++ { ++ HT20_pwrdiff = pHalData->TxPwrHt20Diff[i][Channel-1]; ++ powerlevel[i] += HT20_pwrdiff; ++ } ++ powerBase1 = powerlevel[i]; ++ powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1; ++ *(MCSBase+i) = powerBase1; ++ //RTPRINT(FPHY, PHY_TXPWR, (" [MCS power base index rf(%c) = 0x%x]\n", ((i==0)?'A':'B'), *(MCSBase+i))); ++ } ++} ++ ++static void getTxPowerWriteValByRegulatory( ++ IN PADAPTER Adapter, ++ IN u8 Channel, ++ IN u8 index, ++ IN u32* powerBase0, ++ IN u32* powerBase1, ++ OUT u32* pOutWriteVal ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 i, chnlGroup, pwr_diff_limit[4]; ++ u32 writeVal, customer_limit, rf; ++ ++ // ++ // Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate ++ // ++ for(rf=0; rf<2; rf++) ++ { ++ switch(pHalData->EEPROMRegulatory) ++ { ++ case 0: // Realtek better performance ++ // increase power diff defined by Realtek for large power ++ chnlGroup = 0; ++ //RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", ++ // chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)])); ++ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + ++ ((index<2)?powerBase0[rf]:powerBase1[rf]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal)); ++ break; ++ case 1: // Realtek regulatory ++ // increase power diff defined by Realtek for regulatory ++ { ++ if(pHalData->pwrGroupCnt == 1) ++ chnlGroup = 0; ++ if(pHalData->pwrGroupCnt >= 3) ++ { ++ if(Channel <= 3) ++ chnlGroup = 0; ++ else if(Channel >= 4 && Channel <= 9) ++ chnlGroup = 1; ++ else if(Channel > 9) ++ chnlGroup = 2; ++ ++ if(pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20) ++ chnlGroup++; ++ else ++ chnlGroup+=4; ++ } ++ //RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", ++ //chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)])); ++ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + ++ ((index<2)?powerBase0[rf]:powerBase1[rf]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Realtek regulatory, 20MHz, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal)); ++ } ++ break; ++ case 2: // Better regulatory ++ // don't increase any power diff ++ writeVal = ((index<2)?powerBase0[rf]:powerBase1[rf]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Better regulatory, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal)); ++ break; ++ case 3: // Customer defined power diff. ++ // increase power diff defined by customer. ++ chnlGroup = 0; ++ //RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", ++ // chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)])); ++ ++ if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40) ++ { ++ //RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 40MHz rf(%c) = 0x%x\n", ++ // ((rf==0)?'A':'B'), pHalData->PwrGroupHT40[rf][Channel-1])); ++ } ++ else ++ { ++ //RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 20MHz rf(%c) = 0x%x\n", ++ // ((rf==0)?'A':'B'), pHalData->PwrGroupHT20[rf][Channel-1])); ++ } ++ for (i=0; i<4; i++) ++ { ++ pwr_diff_limit[i] = (u8)((pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)]&(0x7f<<(i*8)))>>(i*8)); ++ if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40) ++ { ++ if(pwr_diff_limit[i] > pHalData->PwrGroupHT40[rf][Channel-1]) ++ pwr_diff_limit[i] = pHalData->PwrGroupHT40[rf][Channel-1]; ++ } ++ else ++ { ++ if(pwr_diff_limit[i] > pHalData->PwrGroupHT20[rf][Channel-1]) ++ pwr_diff_limit[i] = pHalData->PwrGroupHT20[rf][Channel-1]; ++ } ++ } ++ customer_limit = (pwr_diff_limit[3]<<24) | (pwr_diff_limit[2]<<16) | ++ (pwr_diff_limit[1]<<8) | (pwr_diff_limit[0]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Customer's limit rf(%c) = 0x%x\n", ((rf==0)?'A':'B'), customer_limit)); ++ ++ writeVal = customer_limit + ((index<2)?powerBase0[rf]:powerBase1[rf]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Customer, writeVal rf(%c)= 0x%x\n", ((rf==0)?'A':'B'), writeVal)); ++ break; ++ default: ++ chnlGroup = 0; ++ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + ++ ((index<2)?powerBase0[rf]:powerBase1[rf]); ++ //RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal rf(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal)); ++ break; ++ } ++ ++// 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. ++// Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. ++// In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. ++ ++ if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) ++ writeVal = 0x14141414; ++ else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) ++ writeVal = 0x00000000; ++ ++ ++ // 20100628 Joseph: High power mode for BT-Coexist mechanism. ++ // This mechanism is only applied when Driver-Highpower-Mechanism is OFF. ++ if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1) ++ { ++ //RTPRINT(FBT, BT_TRACE, ("Tx Power (-6)\n")); ++ writeVal = writeVal - 0x06060606; ++ } ++ else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2) ++ { ++ //RTPRINT(FBT, BT_TRACE, ("Tx Power (-0)\n")); ++ writeVal = writeVal; ++ } ++ *(pOutWriteVal+rf) = writeVal; ++ } ++} ++ ++static void writeOFDMPowerReg( ++ IN PADAPTER Adapter, ++ IN u8 index, ++ IN u32* pValue ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u16 RegOffset_A[6] = { rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24, ++ rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04, ++ rTxAGC_A_Mcs11_Mcs08, rTxAGC_A_Mcs15_Mcs12}; ++ u16 RegOffset_B[6] = { rTxAGC_B_Rate18_06, rTxAGC_B_Rate54_24, ++ rTxAGC_B_Mcs03_Mcs00, rTxAGC_B_Mcs07_Mcs04, ++ rTxAGC_B_Mcs11_Mcs08, rTxAGC_B_Mcs15_Mcs12}; ++ u8 i, rf, pwr_val[4]; ++ u32 writeVal; ++ u16 RegOffset; ++ ++ for(rf=0; rf<2; rf++) ++ { ++ writeVal = pValue[rf]; ++ for(i=0; i<4; i++) ++ { ++ pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8)); ++ if (pwr_val[i] > RF6052_MAX_TX_PWR) ++ pwr_val[i] = RF6052_MAX_TX_PWR; ++ } ++ writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) |(pwr_val[1]<<8) |pwr_val[0]; ++ ++ if(rf == 0) ++ RegOffset = RegOffset_A[index]; ++ else ++ RegOffset = RegOffset_B[index]; ++ ++ PHY_SetBBReg(Adapter, RegOffset, bMaskDWord, writeVal); ++ //RTPRINT(FPHY, PHY_TXPWR, ("Set 0x%x = %08x\n", RegOffset, writeVal)); ++ ++ // 201005115 Joseph: Set Tx Power diff for Tx power training mechanism. ++ if(((pHalData->rf_type == RF_2T2R) && ++ (RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs15_Mcs12))|| ++ ((pHalData->rf_type != RF_2T2R) && ++ (RegOffset == rTxAGC_A_Mcs07_Mcs04 || RegOffset == rTxAGC_B_Mcs07_Mcs04)) ) ++ { ++ writeVal = pwr_val[3]; ++ if(RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_A_Mcs07_Mcs04) ++ RegOffset = 0xc90; ++ if(RegOffset == rTxAGC_B_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs07_Mcs04) ++ RegOffset = 0xc98; ++ for(i=0; i<3; i++) ++ { ++ if(i!=2) ++ writeVal = (writeVal>8)?(writeVal-8):0; ++ else ++ writeVal = (writeVal>6)?(writeVal-6):0; ++ rtw_write8(Adapter, (u32)(RegOffset+i), (u8)writeVal); ++ } ++ } ++ } ++} ++/*----------------------------------------------------------------------------- ++ * Function: PHY_RF6052SetOFDMTxPower ++ * ++ * Overview: For legacy and HY OFDM, we must read EEPROM TX power index for ++ * different channel and read original value in TX power register area from ++ * 0xe00. We increase offset and original value to be correct tx pwr. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/05/2008 MHC Simulate 8192 series method. ++ * 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to ++ * A/B pwr difference or legacy/HT pwr diff. ++ * 2. We concern with path B legacy/HT OFDM difference. ++ * 01/22/2009 MHC Support new EPRO format from SD3. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++rtl8192c_PHY_RF6052SetOFDMTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerLevel, ++ IN u8 Channel) ++{ ++ //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 writeVal[2], powerBase0[2], powerBase1[2]; ++ u8 index = 0; ++ ++ getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]); ++ ++ for(index=0; index<6; index++) ++ { ++ getTxPowerWriteValByRegulatory(Adapter, Channel, index, ++ &powerBase0[0], &powerBase1[0], &writeVal[0]); ++ ++ writeOFDMPowerReg(Adapter, index, &writeVal[0]); ++ } ++ ++} ++ ++ ++static VOID ++phy_RF6052_Config_HardCode( ++ IN PADAPTER Adapter ++ ) ++{ ++ ++ // Set Default Bandwidth to 20M ++ //Adapter->HalFunc .SetBWModeHandler(Adapter, HT_CHANNEL_WIDTH_20); ++ ++ // TODO: Set Default Channel to channel one for RTL8225 ++ ++} ++ ++static int ++phy_RF6052_Config_ParaFile( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 u4RegValue; ++ u8 eRFPath; ++ BB_REGISTER_DEFINITION_T *pPhyReg; ++ ++ int rtStatus = _SUCCESS; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ static char sz88CRadioAFile[] = RTL8188C_PHY_RADIO_A; ++ static char sz88CRadioBFile[] = RTL8188C_PHY_RADIO_B; ++#ifdef CONFIG_USB_HCI ++ static char sz88CRadioAFile_mCard[] = RTL8188C_PHY_RADIO_A_mCard; ++ static char sz88CRadioBFile_mCard[] = RTL8188C_PHY_RADIO_B_mCard; ++ static char sz88CRadioAFile_HP[] = RTL8188C_PHY_RADIO_A_HP; ++#endif ++ static char sz92CRadioAFile[] = RTL8192C_PHY_RADIO_A; ++ static char sz92CRadioBFile[] = RTL8192C_PHY_RADIO_B; ++ static char sz8723RadioAFile[] = RTL8723_PHY_RADIO_A; ++ static char sz8723RadioBFile[] = RTL8723_PHY_RADIO_B; ++ char *pszRadioAFile, *pszRadioBFile; ++ ++ ++ if(IS_HARDWARE_TYPE_8192C(Adapter)) ++ { ++ if(IS_92C_SERIAL( pHalData->VersionID))// 88c's IPA is different from 92c's ++ { ++ pszRadioAFile = sz92CRadioAFile; ++ pszRadioBFile = sz92CRadioBFile; ++ } ++ else ++ { ++ pszRadioAFile = sz88CRadioAFile; ++ pszRadioBFile = sz88CRadioBFile; ++#ifdef CONFIG_USB_HCI ++ if( BOARD_MINICARD == pHalData->BoardType) ++ { ++ pszRadioAFile = sz88CRadioAFile_mCard; ++ pszRadioBFile = sz88CRadioBFile_mCard; ++ } ++ else if( BOARD_USB_High_PA == pHalData->BoardType) ++ { ++ pszRadioAFile = sz88CRadioAFile_HP; ++ } ++#endif ++ } ++ } ++ else if(IS_HARDWARE_TYPE_8723A(Adapter)) ++ { ++ pszRadioAFile = sz8723RadioAFile; ++ pszRadioBFile = sz8723RadioBFile; ++ } ++ ++ //3//----------------------------------------------------------------- ++ //3// <2> Initialize RF ++ //3//----------------------------------------------------------------- ++ //for(eRFPath = RF_PATH_A; eRFPath NumTotalRFPath; eRFPath++) ++ for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ { ++ ++ pPhyReg = &pHalData->PHYRegDef[eRFPath]; ++ ++ /*----Store original RFENV control type----*/ ++ switch(eRFPath) ++ { ++ case RF_PATH_A: ++ case RF_PATH_C: ++ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV); ++ break; ++ case RF_PATH_B : ++ case RF_PATH_D: ++ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16); ++ break; ++ } ++ ++ /*----Set RF_ENV enable----*/ ++ PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); ++ rtw_udelay_os(1);//PlatformStallExecution(1); ++ ++ /*----Set RF_ENV output high----*/ ++ PHY_SetBBReg(Adapter, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); ++ rtw_udelay_os(1);//PlatformStallExecution(1); ++ ++ /* Set bit number of Address and Data for RF register */ ++ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 1 to 4 bits for 8255 ++ rtw_udelay_os(1);//PlatformStallExecution(1); ++ ++ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for 8255 ++ rtw_udelay_os(1);//PlatformStallExecution(1); ++ ++ /*----Initialize RF fom connfiguration file----*/ ++ switch(eRFPath) ++ { ++ case RF_PATH_A: ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus= rtl8192c_PHY_ConfigRFWithHeaderFile(Adapter,(RF_RADIO_PATH_E)eRFPath); ++#else ++ rtStatus = rtl8192c_PHY_ConfigRFWithParaFile(Adapter, pszRadioAFile, (RF_RADIO_PATH_E)eRFPath); ++#endif ++ break; ++ case RF_PATH_B: ++#ifdef CONFIG_EMBEDDED_FWIMG ++ rtStatus = rtl8192c_PHY_ConfigRFWithHeaderFile(Adapter,(RF_RADIO_PATH_E)eRFPath); ++#else ++ rtStatus = rtl8192c_PHY_ConfigRFWithParaFile(Adapter, pszRadioBFile, (RF_RADIO_PATH_E)eRFPath); ++#endif ++ break; ++ case RF_PATH_C: ++ break; ++ case RF_PATH_D: ++ break; ++ } ++ ++ /*----Restore RFENV control type----*/; ++ switch(eRFPath) ++ { ++ case RF_PATH_A: ++ case RF_PATH_C: ++ PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); ++ break; ++ case RF_PATH_B : ++ case RF_PATH_D: ++ PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); ++ break; ++ } ++ ++ if(rtStatus != _SUCCESS){ ++ //RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath)); ++ goto phy_RF6052_Config_ParaFile_Fail; ++ } ++ ++ } ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("<---phy_RF6052_Config_ParaFile()\n")); ++ return rtStatus; ++ ++phy_RF6052_Config_ParaFile_Fail: ++ return rtStatus; ++} ++ ++ ++int ++PHY_RF6052_Config8192C( ++ IN PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ int rtStatus = _SUCCESS; ++ ++ // ++ // Initialize general global value ++ // ++ // TODO: Extend RF_PATH_C and RF_PATH_D in the future ++ if(pHalData->rf_type == RF_1T1R) ++ pHalData->NumTotalRFPath = 1; ++ else ++ pHalData->NumTotalRFPath = 2; ++ ++ // ++ // Config BB and RF ++ // ++ rtStatus = phy_RF6052_Config_ParaFile(Adapter); ++#if 0 ++ switch( Adapter->MgntInfo.bRegHwParaFile ) ++ { ++ case 0: ++ phy_RF6052_Config_HardCode(Adapter); ++ break; ++ ++ case 1: ++ rtStatus = phy_RF6052_Config_ParaFile(Adapter); ++ break; ++ ++ case 2: ++ // Partial Modify. ++ phy_RF6052_Config_HardCode(Adapter); ++ phy_RF6052_Config_ParaFile(Adapter); ++ break; ++ ++ default: ++ phy_RF6052_Config_HardCode(Adapter); ++ break; ++ } ++#endif ++ return rtStatus; ++ ++} ++ ++ ++// ++// ==> RF shadow Operation API Code Section!!! ++// ++/*----------------------------------------------------------------------------- ++ * Function: PHY_RFShadowRead ++ * PHY_RFShadowWrite ++ * PHY_RFShadowCompare ++ * PHY_RFShadowRecorver ++ * PHY_RFShadowCompareAll ++ * PHY_RFShadowRecorverAll ++ * PHY_RFShadowCompareFlagSet ++ * PHY_RFShadowRecorverFlagSet ++ * ++ * Overview: When we set RF register, we must write shadow at first. ++ * When we are running, we must compare shadow abd locate error addr. ++ * Decide to recorver or not. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 11/20/2008 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++u32 ++PHY_RFShadowRead( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset) ++{ ++ return RF_Shadow[eRFPath][Offset].Value; ++ ++} /* PHY_RFShadowRead */ ++ ++ ++VOID ++PHY_RFShadowWrite( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset, ++ IN u32 Data) ++{ ++ RF_Shadow[eRFPath][Offset].Value = (Data & bRFRegOffsetMask); ++ RF_Shadow[eRFPath][Offset].Driver_Write = _TRUE; ++ ++} /* PHY_RFShadowWrite */ ++ ++ ++BOOLEAN ++PHY_RFShadowCompare( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset) ++{ ++ u32 reg; ++ // Check if we need to check the register ++ if (RF_Shadow[eRFPath][Offset].Compare == _TRUE) ++ { ++ reg = PHY_QueryRFReg(Adapter, eRFPath, Offset, bRFRegOffsetMask); ++ // Compare shadow and real rf register for 20bits!! ++ if (RF_Shadow[eRFPath][Offset].Value != reg) ++ { ++ // Locate error position. ++ RF_Shadow[eRFPath][Offset].ErrorOrNot = _TRUE; ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ++ //("PHY_RFShadowCompare RF-%d Addr%02lx Err = %05lx\n", ++ //eRFPath, Offset, reg)); ++ } ++ return RF_Shadow[eRFPath][Offset].ErrorOrNot ; ++ } ++ return _FALSE; ++} /* PHY_RFShadowCompare */ ++ ++ ++VOID ++PHY_RFShadowRecorver( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset) ++{ ++ // Check if the address is error ++ if (RF_Shadow[eRFPath][Offset].ErrorOrNot == _TRUE) ++ { ++ // Check if we need to recorver the register. ++ if (RF_Shadow[eRFPath][Offset].Recorver == _TRUE) ++ { ++ PHY_SetRFReg(Adapter, eRFPath, Offset, bRFRegOffsetMask, ++ RF_Shadow[eRFPath][Offset].Value); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ++ //("PHY_RFShadowRecorver RF-%d Addr%02lx=%05lx", ++ //eRFPath, Offset, RF_Shadow[eRFPath][Offset].Value)); ++ } ++ } ++ ++} /* PHY_RFShadowRecorver */ ++ ++ ++VOID ++PHY_RFShadowCompareAll( ++ IN PADAPTER Adapter) ++{ ++ u32 eRFPath; ++ u32 Offset; ++ ++ for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++) ++ { ++ for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++) ++ { ++ PHY_RFShadowCompare(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset); ++ } ++ } ++ ++} /* PHY_RFShadowCompareAll */ ++ ++ ++VOID ++PHY_RFShadowRecorverAll( ++ IN PADAPTER Adapter) ++{ ++ u32 eRFPath; ++ u32 Offset; ++ ++ for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++) ++ { ++ for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++) ++ { ++ PHY_RFShadowRecorver(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset); ++ } ++ } ++ ++} /* PHY_RFShadowRecorverAll */ ++ ++ ++VOID ++PHY_RFShadowCompareFlagSet( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset, ++ IN u8 Type) ++{ ++ // Set True or False!!! ++ RF_Shadow[eRFPath][Offset].Compare = Type; ++ ++} /* PHY_RFShadowCompareFlagSet */ ++ ++ ++VOID ++PHY_RFShadowRecorverFlagSet( ++ IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 Offset, ++ IN u8 Type) ++{ ++ // Set True or False!!! ++ RF_Shadow[eRFPath][Offset].Recorver= Type; ++ ++} /* PHY_RFShadowRecorverFlagSet */ ++ ++ ++VOID ++PHY_RFShadowCompareFlagSetAll( ++ IN PADAPTER Adapter) ++{ ++ u32 eRFPath; ++ u32 Offset; ++ ++ for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++) ++ { ++ for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++) ++ { ++ // 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!! ++ if (Offset != 0x26 && Offset != 0x27) ++ PHY_RFShadowCompareFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _FALSE); ++ else ++ PHY_RFShadowCompareFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _TRUE); ++ } ++ } ++ ++} /* PHY_RFShadowCompareFlagSetAll */ ++ ++ ++VOID ++PHY_RFShadowRecorverFlagSetAll( ++ IN PADAPTER Adapter) ++{ ++ u32 eRFPath; ++ u32 Offset; ++ ++ for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++) ++ { ++ for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++) ++ { ++ // 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!! ++ if (Offset != 0x26 && Offset != 0x27) ++ PHY_RFShadowRecorverFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _FALSE); ++ else ++ PHY_RFShadowRecorverFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _TRUE); ++ } ++ } ++ ++} /* PHY_RFShadowCompareFlagSetAll */ ++ ++VOID ++PHY_RFShadowRefresh( ++ IN PADAPTER Adapter) ++{ ++ u32 eRFPath; ++ u32 Offset; ++ ++ for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++) ++ { ++ for (Offset = 0; Offset < RF6052_MAX_REG; Offset++) ++ { ++ RF_Shadow[eRFPath][Offset].Value = 0; ++ RF_Shadow[eRFPath][Offset].Compare = _FALSE; ++ RF_Shadow[eRFPath][Offset].Recorver = _FALSE; ++ RF_Shadow[eRFPath][Offset].ErrorOrNot = _FALSE; ++ RF_Shadow[eRFPath][Offset].Driver_Write = _FALSE; ++ } ++ } ++ ++} /* PHY_RFShadowRead */ ++ ++/* End of HalRf6052.c */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c +new file mode 100644 +index 000000000000..1b102c650563 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c +@@ -0,0 +1,874 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192C_REDESC_C_ ++#include ++#include ++#include ++#include ++ ++static u8 evm_db2percentage(s8 value) ++{ ++ // ++ // -33dB~0dB to 0%~99% ++ // ++ s8 ret_val; ++ ++ ret_val = value; ++ //ret_val /= 2; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("EVMdbToPercentage92S Value=%d / %x \n", ret_val, ret_val)); ++ ++ if(ret_val >= 0) ++ ret_val = 0; ++ if(ret_val <= -33) ++ ret_val = -33; ++ ++ ret_val = 0 - ret_val; ++ ret_val*=3; ++ ++ if(ret_val == 99) ++ ret_val = 100; ++ ++ return(ret_val); ++} ++ ++ ++static s32 signal_scale_mapping(_adapter *padapter, s32 cur_sig ) ++{ ++ s32 ret_sig; ++ ++#ifdef CONFIG_USB_HCI ++ if(cur_sig >= 51 && cur_sig <= 100) ++ { ++ ret_sig = 100; ++ } ++ else if(cur_sig >= 41 && cur_sig <= 50) ++ { ++ ret_sig = 80 + ((cur_sig - 40)*2); ++ } ++ else if(cur_sig >= 31 && cur_sig <= 40) ++ { ++ ret_sig = 66 + (cur_sig - 30); ++ } ++ else if(cur_sig >= 21 && cur_sig <= 30) ++ { ++ ret_sig = 54 + (cur_sig - 20); ++ } ++ else if(cur_sig >= 10 && cur_sig <= 20) ++ { ++ ret_sig = 42 + (((cur_sig - 10) * 2) / 3); ++ } ++ else if(cur_sig >= 5 && cur_sig <= 9) ++ { ++ ret_sig = 22 + (((cur_sig - 5) * 3) / 2); ++ } ++ else if(cur_sig >= 1 && cur_sig <= 4) ++ { ++ ret_sig = 6 + (((cur_sig - 1) * 3) / 2); ++ } ++ else ++ { ++ ret_sig = cur_sig; ++ } ++#else ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ ++ if(pHalData->CustomerID == RT_CID_819x_Lenovo) ++ { ++ // Step 1. Scale mapping. ++ // 20100611 Joseph: Re-tunning RSSI presentation for Lenovo. ++ // 20100426 Joseph: Modify Signal strength mapping. ++ // This modification makes the RSSI indication similar to Intel solution. ++ // 20100414 Joseph: Tunning RSSI for Lenovo according to RTL8191SE. ++ if(cur_sig >= 54 && cur_sig <= 100) ++ { ++ ret_sig = 100; ++ } ++ else if(cur_sig>=42 && cur_sig <= 53 ) ++ { ++ ret_sig = 95; ++ } ++ else if(cur_sig>=36 && cur_sig <= 41 ) ++ { ++ ret_sig = 74 + ((cur_sig - 36) *20)/6; ++ } ++ else if(cur_sig>=33 && cur_sig <= 35 ) ++ { ++ ret_sig = 65 + ((cur_sig - 33) *8)/2; ++ } ++ else if(cur_sig>=18 && cur_sig <= 32 ) ++ { ++ ret_sig = 62 + ((cur_sig - 18) *2)/15; ++ } ++ else if(cur_sig>=15 && cur_sig <= 17 ) ++ { ++ ret_sig = 33 + ((cur_sig - 15) *28)/2; ++ } ++ else if(cur_sig>=10 && cur_sig <= 14 ) ++ { ++ ret_sig = 39; ++ } ++ else if(cur_sig>=8 && cur_sig <= 9 ) ++ { ++ ret_sig = 33; ++ } ++ else if(cur_sig <= 8 ) ++ { ++ ret_sig = 19; ++ } ++ } ++ else ++ { ++ // Step 1. Scale mapping. ++ if(cur_sig >= 61 && cur_sig <= 100) ++ { ++ ret_sig = 90 + ((cur_sig - 60) / 4); ++ } ++ else if(cur_sig >= 41 && cur_sig <= 60) ++ { ++ ret_sig = 78 + ((cur_sig - 40) / 2); ++ } ++ else if(cur_sig >= 31 && cur_sig <= 40) ++ { ++ ret_sig = 66 + (cur_sig - 30); ++ } ++ else if(cur_sig >= 21 && cur_sig <= 30) ++ { ++ ret_sig = 54 + (cur_sig - 20); ++ } ++ else if(cur_sig >= 5 && cur_sig <= 20) ++ { ++ ret_sig = 42 + (((cur_sig - 5) * 2) / 3); ++ } ++ else if(cur_sig == 4) ++ { ++ ret_sig = 36; ++ } ++ else if(cur_sig == 3) ++ { ++ ret_sig = 27; ++ } ++ else if(cur_sig == 2) ++ { ++ ret_sig = 18; ++ } ++ else if(cur_sig == 1) ++ { ++ ret_sig = 9; ++ } ++ else ++ { ++ ret_sig = cur_sig; ++ } ++ } ++#endif ++ ++ return ret_sig; ++} ++ ++ ++static s32 translate2dbm(u8 signal_strength_idx) ++{ ++ s32 signal_power; // in dBm. ++ ++ ++ // Translate to dBm (x=0.5y-95). ++ signal_power = (s32)((signal_strength_idx + 1) >> 1); ++ signal_power -= 95; ++ ++ return signal_power; ++} ++ ++static void query_rx_phy_status(union recv_frame *prframe, struct phy_stat *pphy_stat) ++{ ++ PHY_STS_OFDM_8192CD_T *pOfdm_buf; ++ PHY_STS_CCK_8192CD_T *pCck_buf; ++ u8 i, max_spatial_stream, evm; ++ s8 rx_pwr[4], rx_pwr_all = 0; ++ u8 pwdb_all; ++ u32 rssi,total_rssi=0; ++ u8 bcck_rate=0, rf_rx_num = 0, cck_highpwr = 0; ++ _adapter *padapter = prframe->u.hdr.adapter; ++ struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 tmp_rxsnr; ++ s8 rx_snrX; ++ ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ PHY_RX_DRIVER_INFO_8192CD *pDrvInfo = ((PHY_RX_DRIVER_INFO_8192CD *)pphy_stat); ++ u8 bant1_sel = (pDrvInfo->ANTSEL == 1)?_TRUE:_FALSE; ++#endif ++ ++ // Record it for next packet processing ++ bcck_rate=(pattrib->mcs_rate<=3? 1:0); ++ ++ if(bcck_rate) //CCK ++ { ++ u8 report; ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ if(bant1_sel == _TRUE) ++ pHalData->CCK_Ant1_Cnt++; ++ else ++ pHalData->CCK_Ant2_Cnt++; ++#endif ++ ++ // CCK Driver info Structure is not the same as OFDM packet. ++ pCck_buf = (PHY_STS_CCK_8192CD_T *)pphy_stat; ++ //Adapter->RxStats.NumQryPhyStatusCCK++; ++ ++ // ++ // (1)Hardware does not provide RSSI for CCK ++ // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive) ++ // ++ ++ if(padapter->pwrctrlpriv.rf_pwrstate == rf_on) ++ cck_highpwr = (u8)pHalData->bCckHighPower; ++ else ++ cck_highpwr = _FALSE; ++ ++ if(!cck_highpwr) ++ { ++ report = pCck_buf->cck_agc_rpt&0xc0; ++ report = report>>6; ++ switch(report) ++ { ++ // 03312009 modified by cosa ++ // Modify the RF RNA gain value to -40, -20, -2, 14 by Jenyu's suggestion ++ // Note: different RF with the different RNA gain. ++ case 0x3: ++ rx_pwr_all = (-46) - (pCck_buf->cck_agc_rpt & 0x3e); ++ break; ++ case 0x2: ++ rx_pwr_all = (-26) - (pCck_buf->cck_agc_rpt & 0x3e); ++ break; ++ case 0x1: ++ rx_pwr_all = (-12) - (pCck_buf->cck_agc_rpt & 0x3e); ++ break; ++ case 0x0: ++ rx_pwr_all = (16) - (pCck_buf->cck_agc_rpt & 0x3e); ++ break; ++ } ++ } ++ else ++ { ++ report = pCck_buf->cck_agc_rpt & 0x60; ++ report = report>>5; ++ switch(report) ++ { ++ case 0x3: ++ rx_pwr_all = (-46) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ; ++ break; ++ case 0x2: ++ rx_pwr_all = (-26)- ((pCck_buf->cck_agc_rpt & 0x1f)<<1); ++ break; ++ case 0x1: ++ rx_pwr_all = (-12) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ; ++ break; ++ case 0x0: ++ rx_pwr_all = (16) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ; ++ break; ++ } ++ } ++ ++ pwdb_all= query_rx_pwr_percentage(rx_pwr_all); ++ if(pHalData->CustomerID == RT_CID_819x_Lenovo) ++ { ++ // CCK gain is smaller than OFDM/MCS gain, ++ // so we add gain diff by experiences, the val is 6 ++ pwdb_all+=6; ++ if(pwdb_all > 100) ++ pwdb_all = 100; ++ // modify the offset to make the same gain index with OFDM. ++ if(pwdb_all > 34 && pwdb_all <= 42) ++ pwdb_all -= 2; ++ else if(pwdb_all > 26 && pwdb_all <= 34) ++ pwdb_all -= 6; ++ else if(pwdb_all > 14 && pwdb_all <= 26) ++ pwdb_all -= 8; ++ else if(pwdb_all > 4 && pwdb_all <= 14) ++ pwdb_all -= 4; ++ } ++ ++ pattrib->RxPWDBAll = pwdb_all; //for DIG/rate adaptive ++ pattrib->RecvSignalPower = rx_pwr_all; //dBM ++ padapter->recvpriv.rxpwdb = rx_pwr_all; ++ // ++ // (3) Get Signal Quality (EVM) ++ // ++ //if(bPacketMatchBSSID) ++ { ++ u8 sq; ++ ++ if(pHalData->CustomerID == RT_CID_819x_Lenovo) ++ { ++ // mapping to 5 bars for vista signal strength ++ // signal quality in driver will be displayed to signal strength ++ // in vista. ++ if(pwdb_all >= 50) ++ sq = 100; ++ else if(pwdb_all >= 35 && pwdb_all < 50) ++ sq = 80; ++ else if(pwdb_all >= 22 && pwdb_all < 35) ++ sq = 60; ++ else if(pwdb_all >= 18 && pwdb_all < 22) ++ sq = 40; ++ else ++ sq = 20; ++ } ++ else ++ { ++ if(pwdb_all> 40) ++ { ++ sq = 100; ++ } ++ else ++ { ++ sq = pCck_buf->SQ_rpt; ++ ++ if(pCck_buf->SQ_rpt > 64) ++ sq = 0; ++ else if (pCck_buf->SQ_rpt < 20) ++ sq= 100; ++ else ++ sq = ((64-sq) * 100) / 44; ++ ++ } ++ } ++ ++ pattrib->signal_qual=sq; ++ pattrib->rx_mimo_signal_qual[0]=sq; ++ pattrib->rx_mimo_signal_qual[1]=(-1); ++ } ++ ++ } ++ else //OFDM/HT ++ { ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ if(bant1_sel == _TRUE) ++ pHalData->OFDM_Ant1_Cnt++; ++ else ++ pHalData->OFDM_Ant2_Cnt++; ++#endif ++ pdmpriv->OFDM_Pkt_Cnt++; ++ ++ pOfdm_buf = (PHY_STS_OFDM_8192CD_T *)pphy_stat; ++ ++ // ++ // (1)Get RSSI per-path ++ // ++ for(i=0; iNumTotalRFPath; i++) ++ { ++ // 2008/01/30 MH we will judge RF RX path now. ++ if (pHalData->bRFPathRxEnable[i]) ++ rf_rx_num++; ++ //else ++ //continue; ++ ++ rx_pwr[i] = ((pOfdm_buf->trsw_gain_X[i]&0x3F)*2) - 110; ++ padapter->recvpriv.RxRssi[i] = rx_pwr[i]; ++ /* Translate DBM to percentage. */ ++ pattrib->rx_rssi[i] = rssi = query_rx_pwr_percentage(rx_pwr[i]); ++ total_rssi += rssi; ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("RF-%d RXPWR=%x RSSI=%d\n", i, rx_pwr[i], rssi)); ++ ++ //Get Rx snr value in DB ++ tmp_rxsnr = pOfdm_buf->rxsnr_X[i]; ++ rx_snrX = (s8)(tmp_rxsnr); ++ rx_snrX >>= 1; ++ padapter->recvpriv.RxSNRdB[i] = (int)rx_snrX; ++ pattrib->rx_snr[i]=pOfdm_buf->rxsnr_X[i]; ++ /* Record Signal Strength for next packet */ ++ //if(bPacketMatchBSSID) ++ { ++ //pRfd->Status.RxMIMOSignalStrength[i] =(u1Byte) RSSI; ++ ++ //The following is for lenovo signal strength in vista ++ if(pHalData->CustomerID == RT_CID_819x_Lenovo) ++ { ++ u8 sq; ++ ++ if(i == 0) ++ { ++ // mapping to 5 bars for vista signal strength ++ // signal quality in driver will be displayed to signal strength ++ // in vista. ++ if(rssi >= 50) ++ sq = 100; ++ else if(rssi >= 35 && rssi < 50) ++ sq = 80; ++ else if(rssi >= 22 && rssi < 35) ++ sq = 60; ++ else if(rssi >= 18 && rssi < 22) ++ sq = 40; ++ else ++ sq = 20; ++ //DbgPrint("ofdm/mcs RSSI=%d\n", RSSI); ++ //pRfd->Status.SignalQuality = SQ; ++ //DbgPrint("ofdm/mcs SQ = %d\n", pRfd->Status.SignalQuality); ++ } ++ } ++ } ++ } ++ ++ ++ // ++ // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive),average ++ // ++ rx_pwr_all = (((pOfdm_buf->pwdb_all ) >> 1 )& 0x7f) -110;//for OFDM Average RSSI ++ pwdb_all = query_rx_pwr_percentage(rx_pwr_all); ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("PWDB_ALL=%d\n", pwdb_all)); ++ ++ pattrib->RxPWDBAll = pwdb_all; //for DIG/rate adaptive ++ pattrib->RecvSignalPower = rx_pwr_all;//dBM ++ padapter->recvpriv.rxpwdb = rx_pwr_all; ++ // ++ // (3)EVM of HT rate ++ // ++ if(pHalData->CustomerID != RT_CID_819x_Lenovo) ++ { ++ if(pattrib->rxht && pattrib->mcs_rate >=20 && pattrib->mcs_rate<=27) ++ max_spatial_stream = 2; //both spatial stream make sense ++ else ++ max_spatial_stream = 1; //only spatial stream 1 makes sense ++ ++ for(i=0; i>= 1" because the compilor of free build environment ++ // fill most significant bit to "zero" when doing shifting operation which may change a negative ++ // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. ++ evm = evm_db2percentage( (pOfdm_buf->rxevm_X[i]/*/ 2*/));//dbm ++ ++ RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("RXRATE=%x RXEVM=%x EVM=%s%d\n", ++ pattrib->mcs_rate, pOfdm_buf->rxevm_X[i], "%",evm)); ++ ++ //if(bPacketMatchBSSID) ++ { ++ if(i==0) // Fill value in RFD, Get the first spatial stream only ++ { ++ pattrib->signal_qual = (u8)(evm & 0xff); ++ } ++ pattrib->rx_mimo_signal_qual[i] = (u8)(evm & 0xff); ++ } ++ } ++ ++ } ++ ++ // ++ // 4. Record rx statistics for debug ++ // ++ ++ } ++ ++ ++ //UI BSS List signal strength(in percentage), make it good looking, from 0~100. ++ //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp(). ++ if(bcck_rate) ++ { ++ pattrib->signal_strength=(u8)signal_scale_mapping(padapter, pwdb_all); ++ } ++ else ++ { ++ if (rf_rx_num != 0) ++ { ++ pattrib->signal_strength= (u8)(signal_scale_mapping(padapter, total_rssi/=rf_rx_num)); ++ } ++ } ++ //DBG_8192C("%s,rx_pwr_all(%d),RxPWDBAll(%d)\n",__FUNCTION__,rx_pwr_all,pattrib->RxPWDBAll); ++ ++} ++ ++ ++static void process_rssi(_adapter *padapter,union recv_frame *prframe) ++{ ++ u32 last_rssi, tmp_val; ++ struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib; ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ struct signal_stat * signal_stat = &padapter->recvpriv.signal_strength_data; ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++ //DBG_8192C("process_rssi=> pattrib->rssil(%d) signal_strength(%d)\n ",pattrib->RecvSignalPower,pattrib->signal_strength); ++ //if(pRfd->Status.bPacketToSelf || pRfd->Status.bPacketBeacon) ++ { ++ ++ #ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ if(signal_stat->update_req) { ++ signal_stat->total_num = 0; ++ signal_stat->total_val = 0; ++ signal_stat->update_req = 0; ++ } ++ ++ signal_stat->total_num++; ++ signal_stat->total_val += pattrib->signal_strength; ++ signal_stat->avg_val = signal_stat->total_val / signal_stat->total_num; ++ #else //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++ //Adapter->RxStats.RssiCalculateCnt++; //For antenna Test ++ if(padapter->recvpriv.signal_strength_data.total_num++ >= PHY_RSSI_SLID_WIN_MAX) ++ { ++ padapter->recvpriv.signal_strength_data.total_num = PHY_RSSI_SLID_WIN_MAX; ++ last_rssi = padapter->recvpriv.signal_strength_data.elements[padapter->recvpriv.signal_strength_data.index]; ++ padapter->recvpriv.signal_strength_data.total_val -= last_rssi; ++ } ++ padapter->recvpriv.signal_strength_data.total_val +=pattrib->signal_strength; ++ ++ padapter->recvpriv.signal_strength_data.elements[padapter->recvpriv.signal_strength_data.index++] = pattrib->signal_strength; ++ if(padapter->recvpriv.signal_strength_data.index >= PHY_RSSI_SLID_WIN_MAX) ++ padapter->recvpriv.signal_strength_data.index = 0; ++ ++ ++ tmp_val = padapter->recvpriv.signal_strength_data.total_val/padapter->recvpriv.signal_strength_data.total_num; ++ ++ if(padapter->recvpriv.is_signal_dbg) { ++ padapter->recvpriv.signal_strength= padapter->recvpriv.signal_strength_dbg; ++ padapter->recvpriv.rssi=(s8)translate2dbm((u8)padapter->recvpriv.signal_strength_dbg); ++ } else { ++ padapter->recvpriv.signal_strength= tmp_val; ++ padapter->recvpriv.rssi=(s8)translate2dbm((u8)tmp_val); ++ } ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("UI RSSI = %d, ui_rssi.TotalVal = %d, ui_rssi.TotalNum = %d\n", tmp_val, padapter->recvpriv.signal_strength_data.total_val,padapter->recvpriv.signal_strength_data.total_num)); ++ #endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ } ++ ++}// Process_UI_RSSI_8192C ++ ++ ++static void process_PWDB(_adapter *padapter, union recv_frame *prframe) ++{ ++ int UndecoratedSmoothedPWDB; ++ int UndecoratedSmoothedCCK; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct rx_pkt_attrib *pattrib= &prframe->u.hdr.attrib; ++ struct sta_info *psta = prframe->u.hdr.psta; ++ u8 isCCKrate=(pattrib->mcs_rate<=3? 1:0); ++ ++ ++ if(psta) ++ { ++ UndecoratedSmoothedPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB; ++ UndecoratedSmoothedCCK = psta->rssi_stat.UndecoratedSmoothedCCK; ++ } ++ else ++ { ++ UndecoratedSmoothedPWDB = pdmpriv->UndecoratedSmoothedPWDB; ++ UndecoratedSmoothedCCK = pdmpriv->UndecoratedSmoothedCCK; ++ } ++ ++ //if(pRfd->Status.bPacketToSelf || pRfd->Status.bPacketBeacon) ++ ++ if(!isCCKrate) ++ { ++ // Process OFDM RSSI ++ if(UndecoratedSmoothedPWDB < 0) // initialize ++ { ++ UndecoratedSmoothedPWDB = pattrib->RxPWDBAll; ++ } ++ ++ if(pattrib->RxPWDBAll > (u32)UndecoratedSmoothedPWDB) ++ { ++ UndecoratedSmoothedPWDB = ++ ( ((UndecoratedSmoothedPWDB)*(Rx_Smooth_Factor-1)) + ++ (pattrib->RxPWDBAll)) /(Rx_Smooth_Factor); ++ ++ UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB + 1; ++ } ++ else ++ { ++ UndecoratedSmoothedPWDB = ++ ( ((UndecoratedSmoothedPWDB)*(Rx_Smooth_Factor-1)) + ++ (pattrib->RxPWDBAll)) /(Rx_Smooth_Factor); ++ } ++ } ++ else ++ { ++ // Process CCK RSSI ++ if(UndecoratedSmoothedCCK < 0) // initialize ++ { ++ UndecoratedSmoothedCCK = pattrib->RxPWDBAll; ++ } ++ ++ if(pattrib->RxPWDBAll > (u32)UndecoratedSmoothedCCK) ++ { ++ UndecoratedSmoothedCCK = ++ ( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) + ++ (pattrib->RxPWDBAll)) /(Rx_Smooth_Factor); ++ ++ UndecoratedSmoothedCCK = UndecoratedSmoothedCCK + 1; ++ } ++ else ++ { ++ UndecoratedSmoothedCCK = ++ ( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) + ++ (pattrib->RxPWDBAll)) /(Rx_Smooth_Factor); ++ } ++ } ++ ++ ++ if(psta) ++ { ++ //psta->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;//todo: ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ ++ if(pdmpriv->RSSI_Select == RSSI_OFDM){ ++ psta->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ } ++ else if(pdmpriv->RSSI_Select == RSSI_CCK){ ++ psta->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK; ++ } ++ else{ ++ if(UndecoratedSmoothedPWDB <0 ) ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK; ++ else ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ } ++ psta->rssi_stat.UndecoratedSmoothedCCK = UndecoratedSmoothedCCK; ++ } ++ else ++ { ++ //pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ ++ if(pdmpriv->RSSI_Select == RSSI_OFDM){ ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ } ++ else if(pdmpriv->RSSI_Select == RSSI_CCK){ ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK; ++ } ++ else { ++ if(UndecoratedSmoothedPWDB <0 ) ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK; ++ else ++ pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB; ++ ++ } ++ pdmpriv->UndecoratedSmoothedCCK = UndecoratedSmoothedCCK; ++ } ++ ++ //UpdateRxSignalStatistics8192C(padapter, prframe); ++ ++} ++ ++ ++static void process_link_qual(_adapter *padapter,union recv_frame *prframe) ++{ ++ u32 last_evm=0, tmpVal; ++ struct rx_pkt_attrib *pattrib; ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ struct signal_stat * signal_stat; ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++ if(prframe == NULL || padapter==NULL){ ++ return; ++ } ++ ++ pattrib = &prframe->u.hdr.attrib; ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ signal_stat = &padapter->recvpriv.signal_qual_data; ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++ //DBG_8192C("process_link_qual=> pattrib->signal_qual(%d)\n ",pattrib->signal_qual); ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ if(signal_stat->update_req) { ++ signal_stat->total_num = 0; ++ signal_stat->total_val = 0; ++ signal_stat->update_req = 0; ++ } ++ ++ signal_stat->total_num++; ++ signal_stat->total_val += pattrib->signal_qual; ++ signal_stat->avg_val = signal_stat->total_val / signal_stat->total_num; ++ ++#else //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ if(pattrib->signal_qual != 0) ++ { ++ // ++ // 1. Record the general EVM to the sliding window. ++ // ++ if(padapter->recvpriv.signal_qual_data.total_num++ >= PHY_LINKQUALITY_SLID_WIN_MAX) ++ { ++ padapter->recvpriv.signal_qual_data.total_num = PHY_LINKQUALITY_SLID_WIN_MAX; ++ last_evm = padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index]; ++ padapter->recvpriv.signal_qual_data.total_val -= last_evm; ++ } ++ padapter->recvpriv.signal_qual_data.total_val += pattrib->signal_qual; ++ ++ padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index++] = pattrib->signal_qual; ++ if(padapter->recvpriv.signal_qual_data.index >= PHY_LINKQUALITY_SLID_WIN_MAX) ++ padapter->recvpriv.signal_qual_data.index = 0; ++ ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Total SQ=%d pattrib->signal_qual= %d\n", padapter->recvpriv.signal_qual_data.total_val, pattrib->signal_qual)); ++ ++ // <1> Showed on UI for user, in percentage. ++ tmpVal = padapter->recvpriv.signal_qual_data.total_val/padapter->recvpriv.signal_qual_data.total_num; ++ padapter->recvpriv.signal_qual=(u8)tmpVal; ++ ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" pattrib->signal_qual =%d\n", pattrib->signal_qual)); ++ } ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++}// Process_UiLinkQuality8192S ++ ++ ++static void process_phy_info(_adapter *padapter, union recv_frame *prframe) ++{ ++ union recv_frame *precvframe = (union recv_frame *)prframe; ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ // If we switch to the antenna for testing, the signal strength ++ // of the packets in this time shall not be counted into total receiving power. ++ // This prevents error counting Rx signal strength and affecting other dynamic mechanism. ++ ++ // Select the packets to do RSSI checking for antenna switching. ++ SwAntDivRSSICheck8192C(padapter, precvframe->u.hdr.attrib.RxPWDBAll); ++ ++ if(GET_HAL_DATA(padapter)->RSSI_test == _TRUE) ++ return; ++#endif ++ // ++ // Check RSSI ++ // ++ process_rssi(padapter, precvframe); ++ // ++ // Check PWDB. ++ // ++ process_PWDB(padapter, precvframe); ++ // ++ // Check EVM ++ // ++ process_link_qual(padapter, precvframe); ++ ++} ++ ++ ++void rtl8192c_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info) ++{ ++ struct rx_pkt_attrib *pattrib = &precvframe->u.hdr.attrib; ++ _adapter *padapter = precvframe->u.hdr.adapter; ++ u8 bPacketMatchBSSID =_FALSE; ++ u8 bPacketToSelf = _FALSE; ++ u8 bPacketBeacon = _FALSE; ++ ++ if((pattrib->physt) && (pphy_info != NULL)) ++ { ++ bPacketMatchBSSID = ((!IsFrameTypeCtrl(precvframe->u.hdr.rx_data)) && !(pattrib->icv_err) && !(pattrib->crc_err) && ++ _rtw_memcmp(get_hdr_bssid(precvframe->u.hdr.rx_data), get_my_bssid(&padapter->mlmeextpriv.mlmext_info.network), ETH_ALEN)); ++ ++ ++ bPacketToSelf = bPacketMatchBSSID && (_rtw_memcmp(get_da(precvframe->u.hdr.rx_data), myid(&padapter->eeprompriv), ETH_ALEN)); ++ ++ bPacketBeacon =bPacketMatchBSSID && (GetFrameSubType(precvframe->u.hdr.rx_data) == WIFI_BEACON); ++ ++ query_rx_phy_status(precvframe, pphy_info); ++ ++ precvframe->u.hdr.psta = NULL; ++ if(bPacketMatchBSSID && check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ u8 *sa; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ sa = get_sa(precvframe->u.hdr.rx_data); ++ ++ psta = rtw_get_stainfo(pstapriv, sa); ++ if(psta) ++ { ++ precvframe->u.hdr.psta = psta; ++ process_phy_info(padapter, precvframe); ++ } ++ } ++ else if(bPacketToSelf || bPacketBeacon) ++ { ++ if(check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ u8 *sa; ++ struct sta_info *psta=NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ sa = get_sa(precvframe->u.hdr.rx_data); ++ ++ psta = rtw_get_stainfo(pstapriv, sa); ++ if(psta) ++ { ++ precvframe->u.hdr.psta = psta; ++ } ++ } ++ ++ process_phy_info(padapter, precvframe); ++ } ++ } ++} ++ ++void rtl8192c_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc) ++{ ++ struct rx_pkt_attrib *pattrib = &precvframe->u.hdr.attrib; ++ ++ //Offset 0 ++ pattrib->physt = (u8)((le32_to_cpu(pdesc->rxdw0) >> 26) & 0x1); ++ pattrib->pkt_len = (u16)(le32_to_cpu(pdesc->rxdw0)&0x00003fff); ++ pattrib->drvinfo_sz = (u8)((le32_to_cpu(pdesc->rxdw0) >> 16) & 0xf) * 8;//uint 2^3 = 8 bytes ++ ++ pattrib->shift_sz = (u8)((le32_to_cpu(pdesc->rxdw0) >> 24) & 0x3); ++ ++ pattrib->crc_err = (u8)((le32_to_cpu(pdesc->rxdw0) >> 14) & 0x1); ++ pattrib->icv_err = (u8)((le32_to_cpu(pdesc->rxdw0) >> 15) & 0x1); ++ pattrib->qos = (u8)(( le32_to_cpu( pdesc->rxdw0 ) >> 23) & 0x1);// Qos data, wireless lan header length is 26 ++ pattrib->bdecrypted = (le32_to_cpu(pdesc->rxdw0) & BIT(27))? 0:1; ++ ++ //Offset 4 ++ pattrib->mfrag = (u8)((le32_to_cpu(pdesc->rxdw1) >> 27) & 0x1);//more fragment bit ++ ++ //Offset 8 ++ pattrib->frag_num = (u8)((le32_to_cpu(pdesc->rxdw2) >> 12) & 0xf);//fragmentation number ++ ++ //Offset 12 ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX ++ if ( le32_to_cpu(pdesc->rxdw3) & BIT(13)){ ++ pattrib->tcpchk_valid = 1; // valid ++ if ( le32_to_cpu(pdesc->rxdw3) & BIT(11) ) { ++ pattrib->tcp_chkrpt = 1; // correct ++ //DBG_8192C("tcp csum ok\n"); ++ } ++ else ++ pattrib->tcp_chkrpt = 0; // incorrect ++ ++ if ( le32_to_cpu(pdesc->rxdw3) & BIT(12) ) ++ pattrib->ip_chkrpt = 1; // correct ++ else ++ pattrib->ip_chkrpt = 0; // incorrect ++ } ++ else { ++ pattrib->tcpchk_valid = 0; // invalid ++ } ++#endif ++ ++ pattrib->mcs_rate=(u8)((le32_to_cpu(pdesc->rxdw3))&0x3f); ++ pattrib->rxht=(u8)((le32_to_cpu(pdesc->rxdw3) >>6)&0x1); ++ pattrib->sgi=(u8)((le32_to_cpu(pdesc->rxdw3) >>8)&0x1); ++ //Offset 16 ++ //Offset 20 ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c +new file mode 100644 +index 000000000000..6275894c8c85 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c +@@ -0,0 +1,93 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#include ++#include ++#ifdef DBG_CONFIG_ERROR_DETECT ++void rtl8192c_sreset_xmit_status_check(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ ++ unsigned long current_time; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ unsigned int diff_time; ++ u32 txdma_status; ++ if( (txdma_status=rtw_read32(padapter, REG_TXDMA_STATUS)) !=0x00){ ++ DBG_871X("%s REG_TXDMA_STATUS:0x%08x\n", __FUNCTION__, txdma_status); ++ rtw_hal_sreset_reset(padapter); ++ } ++ ++ //total xmit irp = 4 ++ //DBG_8192C("==>%s free_xmitbuf_cnt(%d),txirp_cnt(%d)\n",__FUNCTION__,pxmitpriv->free_xmitbuf_cnt,pxmitpriv->txirp_cnt); ++ //if(pxmitpriv->txirp_cnt == NR_XMITBUFF+1) ++ current_time = rtw_get_current_time(); ++ ++ if(0 == pxmitpriv->free_xmitbuf_cnt || 0 == pxmitpriv->free_xmit_extbuf_cnt) { ++ ++ diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_time); ++ ++ if (diff_time > 2000) { ++ if (psrtpriv->last_tx_complete_time == 0) { ++ psrtpriv->last_tx_complete_time = current_time; ++ } ++ else{ ++ diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_complete_time); ++ if (diff_time > 4000) { ++ //padapter->Wifi_Error_Status = WIFI_TX_HANG; ++ DBG_871X("%s tx hang\n", __FUNCTION__); ++ rtw_hal_sreset_reset(padapter); ++ } ++ } ++ } ++ } ++ ++ if (psrtpriv->dbg_trigger_point == SRESET_TGP_XMIT_STATUS) { ++ psrtpriv->dbg_trigger_point = SRESET_TGP_NULL; ++ rtw_hal_sreset_reset(padapter); ++ return; ++ } ++} ++void rtl8192c_sreset_linked_status_check(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct sreset_priv *psrtpriv = &pHalData->srestpriv; ++ ++ u32 regc50,regc58,reg824,reg800; ++ regc50 = rtw_read32(padapter,0xc50); ++ regc58 = rtw_read32(padapter,0xc58); ++ reg824 = rtw_read32(padapter,0x824); ++ reg800 = rtw_read32(padapter,0x800); ++ if( ((regc50&0xFFFFFF00)!= 0x69543400)|| ++ ((regc58&0xFFFFFF00)!= 0x69543400)|| ++ (((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))|| ++ ( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000))) ++ { ++ DBG_8192C("%s regc50:0x%08x, regc58:0x%08x, reg824:0x%08x, reg800:0x%08x,\n", __FUNCTION__, ++ regc50, regc58, reg824, reg800); ++ rtw_hal_sreset_reset(padapter); ++ } ++ ++ if (psrtpriv->dbg_trigger_point == SRESET_TGP_LINK_STATUS) { ++ psrtpriv->dbg_trigger_point = SRESET_TGP_NULL; ++ rtw_hal_sreset_reset(padapter); ++ return; ++ } ++} ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c +new file mode 100644 +index 000000000000..e958164364e1 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c +@@ -0,0 +1,62 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192C_XMIT_C_ ++ ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_XMIT_ACK ++void dump_txrpt_ccx_8192c(void *buf) ++{ ++ struct txrpt_ccx_8192c *txrpt_ccx = buf; ++ ++ DBG_871X("%s:\n" ++ "retry_cnt:%u, rsvd_0:%u, rts_retry_cnt:%u, rsvd_1:%u\n" ++ "ccx_qtime:%u, missed_pkt_num:%u, rsvd_4:%u\n" ++ "mac_id:%u, des1_fragssn:%u\n" ++ "rpt_pkt_num:%u, pkt_drop:%u, lifetime_over:%u, retry_over:%u\n" ++ "edca_tx_queue:%u, rsvd_7:%u, bmc:%u, pkt_ok:%u, init_ccx:%u\n" ++ , __func__ ++ , txrpt_ccx->retry_cnt, txrpt_ccx->rsvd_0, txrpt_ccx->rts_retry_cnt, txrpt_ccx->rsvd_1 ++ , txrpt_ccx_qtime_8192c(txrpt_ccx), txrpt_ccx->missed_pkt_num, txrpt_ccx->rsvd_4 ++ , txrpt_ccx->mac_id, txrpt_ccx->des1_fragssn ++ , txrpt_ccx->rpt_pkt_num, txrpt_ccx->pkt_drop, txrpt_ccx->lifetime_over, txrpt_ccx->retry_over ++ , txrpt_ccx->edca_tx_queue, txrpt_ccx->rsvd_7, txrpt_ccx->bmc, txrpt_ccx->pkt_ok, txrpt_ccx->int_ccx ++ ); ++} ++ ++void handle_txrpt_ccx_8192c(_adapter *adapter, void *buf) ++{ ++ struct txrpt_ccx_8192c *txrpt_ccx = buf; ++ ++ #ifdef DBG_CCX ++ dump_txrpt_ccx_8192c(buf); ++ #endif ++ ++ if (txrpt_ccx->int_ccx) { ++ if (txrpt_ccx->pkt_ok) ++ rtw_ack_tx_done(&adapter->xmitpriv, RTW_SCTX_DONE_SUCCESS); ++ else ++ rtw_ack_tx_done(&adapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL); ++ } ++} ++#endif //CONFIG_XMIT_ACK +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c +new file mode 100644 +index 000000000000..9faa8c19f0fc +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c +@@ -0,0 +1,8757 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++/*Created on 2011/ 6/15, 5:45*/ ++ ++#include ++#include "Hal8192CUHWImg.h" ++ ++#ifdef CONFIG_BT_COEXISTENCE ++// =================== v84 TSMC COMMON 2012-04-13 ======================= ++u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength] = { ++0xc1,0x88,0x02,0x00,0x54,0x00,0x01,0x00,0x04,0x13,0x11,0x07,0x3a,0x3d,0x00,0x00, ++0x58,0x97,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x50,0xa1,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x57,0x91,0x00,0x00,0x00,0x00,0x00,0xa1,0xe8,0x00,0x00,0x00, ++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02, ++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09, ++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08, ++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18, ++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21, ++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20, ++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10, ++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20, ++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04, ++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04, ++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b, ++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c, ++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04, ++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04, ++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a, ++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00, ++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18, ++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50, ++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c, ++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02, ++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30, ++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0, ++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4, ++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04, ++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12, ++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02, ++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e, ++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5, ++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3, ++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01, ++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0, ++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22, ++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a, ++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a, ++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb, ++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29, ++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09, ++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8, ++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec, ++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4, ++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa, ++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82, ++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0, ++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93, ++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74, ++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x48,0x29, ++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4, ++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f, ++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b, ++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60, ++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01, ++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93, ++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8, ++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x77, ++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x54,0x80,0x41,0x9e,0xb0,0x00,0x00,0xf0,0x90, ++0x9e,0x5d,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x85,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5, ++0x45,0x12,0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01, ++0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x86, ++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,0x74,0x05,0xf0, ++0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x63,0x14,0xf0,0xe5,0x61,0x54,0x0f,0xc3, ++0x94,0x0c,0x50,0x03,0x12,0x54,0xe3,0x22,0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4, ++0xf0,0x22,0xe4,0xf5,0x65,0x7f,0x60,0x7e,0x01,0x80,0xed,0x7d,0x01,0xaf,0x62,0x02, ++0x54,0xe7,0xb1,0xb0,0xbf,0x01,0x12,0x90,0x9e,0x79,0xe0,0xff,0xe4,0xfd,0xf1,0x79, ++0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xb1,0xb0,0xbf,0x01,0x0f,0x90, ++0x02,0x09,0xe0,0xff,0x7d,0x01,0xf1,0x79,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x22, ++0x22,0x22,0x00,0x02,0x45,0x03,0x02,0x45,0x06,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x8b,0x20,0x8a,0x21,0x89,0x22,0x90,0x9e,0x87,0x71,0x8b,0xab,0x23,0xaa,0x24,0xa9, ++0x25,0x90,0x9e,0x8a,0x71,0x8b,0xaf,0x26,0x15,0x26,0xef,0x60,0x1b,0x90,0x9e,0x8a, ++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x29,0xd9,0xff,0x90,0x9e,0x87,0xe4,0x75,0xf0, ++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x20,0xaa,0x21,0xa9,0x22,0xd0,0xd0, ++0x92,0xaf,0x22,0x90,0x9e,0x11,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x06,0xa9, ++0xe0,0x90,0x9e,0x10,0xf0,0xe0,0x54,0xc0,0x70,0x08,0x53,0x64,0xfe,0x53,0x64,0xfd, ++0x91,0xcb,0x90,0x9e,0x10,0xe0,0x30,0xe6,0x13,0x43,0x64,0x01,0x90,0x9e,0x66,0xe0, ++0x64,0x02,0x60,0x04,0x91,0xd2,0x80,0x07,0x91,0x79,0x80,0x03,0x53,0x64,0xfe,0x90, ++0x9e,0x10,0xe0,0x30,0xe7,0x16,0x43,0x64,0x02,0xe4,0x90,0x9e,0x85,0x91,0x4e,0x90, ++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x67,0x74,0x01,0xf0,0x22,0x53,0x64,0xfd,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,0x74,0xb0,0xf0,0x74,0x45,0xa3, ++0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,0xe0,0x54,0x90,0x60,0x07,0x90, ++0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80, ++0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82, ++0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0, ++0x05,0xc0,0x06,0xc0,0x07,0x75,0x13,0x00,0x90,0x01,0xc4,0x74,0xe8,0xf0,0x74,0x45, ++0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55, ++0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5, ++0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x09,0x90, ++0x01,0x3c,0x74,0x02,0xf0,0x12,0x61,0xc9,0xe5,0x34,0x30,0xe2,0x38,0x90,0x01,0x3c, ++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90, ++0x9e,0x5b,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x91,0x5e, ++0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x07,0x90,0x9e, ++0x64,0xe4,0xf0,0x91,0xcb,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c,0x74,0x08,0xf0, ++0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,0x9e,0x5b,0xe0, ++0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f, ++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e,0x63,0xe4,0xf0, ++0x91,0xcb,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4b,0xfb, ++0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4c,0x3d,0xe5,0x35, ++0x30,0xe0,0x44,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0, ++0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x13,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x13,0xb4, ++0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x13,0xb4,0x04,0x05,0x90,0x00,0x83,0x80, ++0x08,0xe5,0x13,0xb4,0x0c,0x06,0x90,0x00,0x83,0xe0,0xf5,0x62,0x90,0x01,0xbb,0xe5, ++0x62,0xf0,0x12,0x60,0xc0,0x91,0xcb,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74, ++0x04,0xf0,0xe5,0x35,0x30,0xe4,0x06,0x90,0x01,0x3d,0x74,0x10,0xf0,0xe5,0x36,0x30, ++0xe0,0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e, ++0x74,0x02,0xf0,0x74,0xe8,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07, ++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0, ++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x9e,0x98,0xef,0xf0,0xa3,0xed, ++0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x63,0x60,0x05,0xe4,0xff,0x12,0x54,0x97,0x90, ++0x9e,0x98,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9a,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90, ++0x9e,0x98,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90, ++0x9e,0x99,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc, ++0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9a,0xa3,0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54, ++0xf7,0xf0,0x90,0x9e,0x9a,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0x75,0x28,0x33,0xe4,0xf5, ++0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0, ++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x16,0xf0,0xa3,0xf0, ++0x75,0x8e,0x02,0xf1,0xa1,0xf1,0xe9,0x90,0x9e,0x7e,0xef,0xf0,0xf1,0xdd,0x90,0x9e, ++0x80,0xef,0xf0,0xf1,0xf6,0x90,0x9e,0x75,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57, ++0x12,0x6e,0x77,0xf1,0xd4,0x12,0x60,0x4b,0x12,0x32,0x3d,0xf1,0xc9,0x11,0x0b,0x12, ++0x50,0x0e,0xf1,0xcd,0xf1,0xb1,0x12,0x44,0xff,0xf1,0x45,0x90,0x9e,0x18,0xe5,0xd9, ++0xf0,0x11,0xd0,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0xb1,0x45,0x75,0xe8, ++0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x9e,0x16,0xe0,0x64,0x01,0xf0,0x24,0x29,0x90, ++0x01,0xc4,0xf0,0x74,0x48,0xa3,0xf0,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57, ++0xef,0xd2,0xaf,0x12,0x58,0x74,0xe5,0x57,0x30,0xe6,0x17,0xc2,0xaf,0x53,0x57,0xbf, ++0xd2,0xaf,0x12,0x67,0xa1,0x90,0x9e,0x43,0xe0,0xff,0x60,0x03,0xb4,0x01,0x03,0x12, ++0x7b,0x5c,0x90,0x9e,0x43,0xe0,0x70,0x03,0x12,0x7c,0x5f,0x12,0x73,0x85,0x80,0xb6, ++0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0x31,0x05,0x7d,0xff,0x7f,0x55,0x31,0x05,0x7d, ++0xff,0x7f,0x56,0x31,0x05,0x7d,0xff,0x7f,0x57,0x80,0x0a,0xf0,0x90,0x00,0x45,0xe0, ++0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83, ++0x00,0xed,0xf0,0xb1,0x45,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60, ++0x66,0x24,0x02,0x60,0x02,0x21,0xc1,0x90,0x9e,0x3f,0x74,0x02,0xf0,0x90,0x00,0x48, ++0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f, ++0x47,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90, ++0x9e,0x3f,0xf0,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x31, ++0x05,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0, ++0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x90,0x9e,0x45, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9, ++0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x45,0xe0,0x44, ++0x10,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x31, ++0x05,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x41,0xf0,0x90,0x00,0x01,0x12, ++0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x40,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25, ++0xe0,0x90,0x9e,0x44,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61, ++0xe0,0x90,0x9e,0x50,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63, ++0xe0,0x90,0x9e,0x52,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90, ++0x9e,0x40,0xe0,0xff,0x91,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e, ++0x41,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,0x40,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e, ++0x44,0xe0,0x70,0x02,0x41,0xc8,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf, ++0x90,0x9e,0x53,0x74,0x01,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x11,0xfc, ++0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60, ++0x15,0x90,0x9e,0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e, ++0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0, ++0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e, ++0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e, ++0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf, ++0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d, ++0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2b,0x90,0x9e,0x41,0xe0,0x70,0x2d,0x90,0x9e, ++0x53,0x11,0xfb,0x90,0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x31,0x05,0x90,0x05, ++0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff, ++0x12,0x36,0x92,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x14,0x8a,0x15, ++0x89,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x42,0xf0,0xe0,0x30,0xe0,0x4b, ++0x90,0x9e,0x39,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x3b, ++0x12,0x2a,0x7f,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x01,0x12,0x42,0x20,0xff, ++0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab, ++0x07,0x90,0x9e,0x3b,0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e, ++0x45,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x39,0xf0, ++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90, ++0x9e,0x3b,0x12,0x2a,0x7f,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x42,0xe0,0x30,0xe1,0x19,0x7d, ++0x0c,0x7f,0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05, ++0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f, ++0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00, ++0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0x31,0x05,0xe4,0x90,0x9e,0x3f,0xf0,0x22,0x90, ++0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x31,0x05,0xe4,0xfd,0x7f,0x51,0x31,0x05,0xe4, ++0xfd,0x7f,0x52,0x31,0x05,0xe4,0xfd,0x7f,0x53,0x21,0x05,0xe5,0x65,0x64,0x01,0x70, ++0x3b,0xd1,0x85,0xbf,0x01,0x04,0x7f,0x01,0xd1,0x79,0x90,0x00,0x46,0xe0,0x44,0x04, ++0xfd,0x7f,0x46,0x31,0x05,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x31,0x05, ++0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x31,0x05,0x7f,0x02,0xd1,0xa1,0x8f, ++0x69,0x90,0x01,0xc9,0xe5,0x69,0xf0,0xb4,0x01,0x02,0xd1,0x19,0x22,0x90,0x9e,0x41, ++0xe0,0x64,0x01,0x60,0x02,0x81,0xef,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46, ++0x31,0x05,0x90,0x9e,0x53,0xe0,0x70,0x31,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e, ++0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f, ++0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x9e,0x40,0xe0,0xff,0x91,0xf0, ++0x90,0x9e,0x53,0x74,0x01,0x11,0xfb,0x80,0x3f,0x90,0x9e,0x53,0xe0,0x64,0x01,0x70, ++0x37,0x90,0x9e,0x44,0xe0,0xff,0x91,0xf0,0xe4,0x90,0x9e,0x53,0xf0,0x90,0x00,0x45, ++0xe0,0x44,0x01,0xfd,0x7f,0x45,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e, ++0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f, ++0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90, ++0x9e,0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90, ++0x9e,0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0x22, ++0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x50,0xf0, ++0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x52,0xf0, ++0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x50,0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0, ++0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90, ++0x9e,0x52,0x80,0x03,0x90,0x9e,0x51,0xe0,0x04,0xf0,0x22,0x90,0x9e,0x50,0xe0,0x2f, ++0xf0,0x22,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe, ++0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x2a,0xed, ++0xf0,0x90,0x9e,0x29,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90, ++0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4, ++0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0, ++0xb1,0x45,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x59,0x90,0x9e,0x29,0xe0,0x24,0xf8,0xf0, ++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80, ++0x1a,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0xb1,0x45,0x90,0x9e,0x29, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90, ++0x00,0x43,0xb1,0x42,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e,0xb1, ++0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x31,0x05,0x90,0x9e,0xb1,0xe0, ++0x44,0xb0,0xfd,0x7f,0x49,0x21,0x05,0x90,0x9e,0x27,0xee,0xf0,0xa3,0xef,0xf0,0x75, ++0x65,0x01,0x8e,0x66,0xf5,0x67,0xe4,0xfd,0x7f,0x0b,0xb1,0x55,0xe4,0xfd,0x7f,0x02, ++0xb1,0x55,0xd1,0x85,0xe4,0xff,0xd1,0x79,0xe4,0xf5,0x69,0x90,0x01,0xc9,0xe5,0x69, ++0xf0,0x90,0x9e,0x27,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45, ++0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x90,0x01,0xca,0xe5,0x68,0xf0,0xef, ++0x60,0x02,0xd1,0x19,0x22,0x7f,0x0b,0xd1,0xa1,0xef,0x65,0x68,0x60,0x10,0xe5,0x68, ++0xb4,0x01,0x05,0xe4,0xf5,0x68,0x80,0x03,0x75,0x68,0x01,0x7f,0x01,0x22,0x7f,0x00, ++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07, ++0x50,0x43,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4, ++0xff,0x90,0x00,0x46,0xb1,0x42,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8, ++0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0, ++0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13, ++0xd8,0xf8,0xff,0x80,0x4b,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f, ++0xf0,0xb1,0x45,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80, ++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x42,0xe0,0xfb,0xe4,0xfe, ++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff, ++0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x31,0x05,0x90,0x04,0xfd,0xe4,0xf0, ++0xa3,0xf0,0x90,0x9e,0x43,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x9e, ++0x4a,0xf0,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4b,0xf0,0x90,0x9e,0x4e,0xf0,0x90,0x9e, ++0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x3a,0xf0,0x90,0x9e, ++0x3f,0xf0,0x90,0x9e,0x41,0xf0,0x90,0x9e,0x53,0xf0,0x90,0x9e,0x44,0xf0,0x90,0x9e, ++0x40,0xf0,0x90,0x9e,0x39,0xf0,0x90,0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x21, ++0x05,0xe4,0x90,0x9e,0x7d,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x21, ++0x05,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0, ++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0xe4,0xf5,0x68,0x22,0x90,0x01,0x64, ++0x74,0xa0,0xf0,0x22,0x90,0x9e,0x80,0xe0,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0xf3, ++0xe0,0x7f,0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f, ++0x01,0x60,0x02,0x7f,0x00,0x22,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2, ++0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x90,0x00, ++0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3, ++0xe4,0xf0,0x22,0x90,0x01,0x02,0xe0,0x54,0x03,0xff,0xe0,0x54,0x0c,0x13,0x13,0x54, ++0x3f,0xfe,0xef,0x64,0x01,0x60,0x04,0xef,0xb4,0x03,0x10,0x90,0x9e,0x10,0x74,0x01, ++0xf0,0xa3,0x74,0x37,0xf0,0xa3,0x74,0x01,0xf0,0x80,0x1a,0xee,0x64,0x01,0x60,0x07, ++0xaf,0x06,0xee,0x64,0x03,0x70,0x49,0x90,0x9e,0x10,0x74,0x01,0xf0,0xa3,0x74,0x3d, ++0xf0,0xa3,0x74,0x40,0xf0,0x90,0x9e,0x10,0xe0,0xfe,0xa3,0xe0,0xff,0xf5,0x82,0x8e, ++0x83,0xe0,0xfd,0x90,0x9e,0x12,0xe0,0xfc,0xed,0x5c,0x60,0x0c,0x8f,0x82,0x8e,0x83, ++0xec,0xf0,0xe4,0x90,0x9e,0x77,0xf0,0x22,0x90,0x9e,0x77,0xe0,0x04,0xf0,0xe0,0xc3, ++0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x44,0xea, ++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00, ++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01, ++0xc4,0x74,0xa1,0xf0,0x74,0x50,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c, ++0xa3,0xe0,0x55,0x29,0xf5,0x2d,0xa3,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b, ++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x41,0x46,0x90,0x01,0x34,0x74,0x01,0xf0,0x85, ++0xd1,0x4d,0x85,0xd2,0x4e,0x85,0xd3,0x4f,0x85,0xd4,0x50,0x85,0xd5,0x51,0x85,0xd6, ++0x52,0x85,0xd7,0x53,0x85,0xd9,0x54,0xe5,0x54,0x54,0x40,0xc3,0x13,0xff,0xe5,0x53, ++0x54,0x20,0x6f,0x70,0x02,0x21,0xf5,0xe5,0x54,0x30,0xe5,0x02,0x21,0xf5,0xe5,0x52, ++0x54,0x3f,0xf5,0x08,0xe5,0x4d,0x54,0x3f,0xf5,0x09,0xe5,0x51,0x54,0x1f,0xff,0xe5, ++0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12, ++0x42,0x81,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4, ++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x09,0xd3,0x94,0x04,0x40, ++0x03,0x75,0x09,0x04,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,0x75, ++0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x53,0x54,0x1f, ++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f, ++0x75,0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x54,0x20, ++0xe6,0x24,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4, ++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,0x30,0xe7,0x36,0xaf, ++0x08,0x12,0x63,0x51,0x80,0x2f,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24, ++0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f, ++0x30,0xe7,0x12,0xe5,0x4f,0x54,0x7f,0xfd,0xe5,0x53,0x54,0x1f,0xf5,0x0d,0xab,0x09, ++0xaf,0x08,0x12,0x62,0xee,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x9e, ++0x66,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x71, ++0xc3,0xef,0x64,0x01,0x70,0x30,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e, ++0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x5e,0x90,0x01,0x5b,0x74, ++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x9e,0x64,0xf0,0x80,0x08,0x71,0xc3, ++0xbf,0x01,0x03,0x12,0x44,0xcb,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02, ++0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c, ++0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0xd2,0xe5,0x2c,0x30,0xe3,0x06, ++0x90,0x01,0x34,0x74,0x08,0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10, ++0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f, ++0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00, ++0x12,0x4b,0xcf,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4d,0x45,0x80,0xfe,0xe5, ++0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x12,0x90, ++0x9e,0x7f,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x61,0x4e,0x90,0x9e,0x7f,0xe4, ++0xf0,0xe5,0x2e,0x30,0xe1,0x0b,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x11, ++0x23,0xe5,0x2e,0x30,0xe2,0x09,0x90,0x01,0x36,0x74,0x04,0xf0,0x12,0x60,0xdf,0xe5, ++0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x60,0x64,0x01,0x70,0x1c, ++0xe5,0x63,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90, ++0x9e,0x85,0xe4,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4, ++0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x60,0xb4,0x01,0x20,0xe5,0x63,0x60,0x1c, ++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x67,0xe4,0xf0, ++0x53,0x64,0xfd,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,0xe5,0x2e,0x30,0xe5, ++0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x60,0xb4,0x01,0x14,0xe5,0x63,0x60,0x10, ++0x90,0x9e,0x66,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xd2,0x80,0x03,0x12,0x44,0x79, ++0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x60,0xb4,0x01,0x10, ++0xe5,0x63,0x60,0x0c,0x53,0x64,0xfe,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb, ++0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x91,0x64,0x74,0xa1,0x04, ++0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04, ++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0, ++0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f, ++0x00,0x22,0x90,0x9e,0x10,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0, ++0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x9e,0x90,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79, ++0x10,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x8d,0x12,0x43,0x8b,0x90,0x9e, ++0xb0,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01, ++0x12,0x71,0x7a,0xef,0x60,0x49,0x90,0x9e,0x8d,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24, ++0x89,0x25,0x75,0x26,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e, ++0x90,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,0x89,0x25,0x90,0x9e,0x8d,0x12,0x43,0x6b, ++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x26,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12, ++0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0, ++0xd0,0x92,0xaf,0x22,0x90,0x9e,0xa0,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63, ++0x14,0x24,0xfd,0x50,0x02,0x80,0x1f,0x90,0x9e,0x66,0xe0,0x60,0x06,0x7d,0x01,0x7f, ++0x0c,0x80,0x0d,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,0x06,0x7d,0x01,0x7f,0x04, ++0x91,0xe7,0xe4,0xff,0x91,0x97,0x22,0xef,0x60,0x0b,0x90,0x9e,0x80,0xe0,0xb4,0x01, ++0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x75, ++0xa5,0x22,0x90,0x01,0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x74, ++0x12,0xef,0x70,0x06,0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36, ++0xe6,0xe5,0x63,0x60,0x04,0x7f,0x01,0x91,0x97,0x12,0x74,0xd2,0x53,0x61,0xf0,0x43, ++0x61,0x02,0x22,0x7d,0x01,0x7f,0x0c,0x8f,0x6a,0x8d,0x6b,0xe5,0x6a,0x54,0x0f,0xff, ++0xe5,0x61,0x54,0x0f,0x6f,0x60,0x65,0xe5,0x6a,0x30,0xe2,0x28,0xe5,0x61,0x20,0xe2, ++0x04,0x7f,0x01,0xd1,0xc2,0xe5,0x61,0x30,0xe3,0x0c,0xe5,0x6a,0x20,0xe3,0x07,0xb1, ++0x5d,0xef,0x60,0x48,0xa1,0xa5,0xe5,0x61,0x20,0xe3,0x41,0xe5,0x6a,0x30,0xe3,0x3c, ++0xaf,0x6b,0xc1,0xdc,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x0c,0x0c,0xe5,0x6a,0x20,0xe3, ++0x07,0xb1,0x5d,0xef,0x60,0x26,0xb1,0xa5,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x04,0x0c, ++0xe5,0x6a,0x20,0xe2,0x07,0xf1,0x21,0xef,0x60,0x12,0x91,0xb2,0xe5,0x61,0x54,0x0f, ++0xff,0xbf,0x02,0x08,0x12,0x60,0xbd,0xef,0x60,0x02,0xd1,0xaf,0x22,0x71,0xc3,0xef, ++0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x9e,0x64,0xe0, ++0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x9e,0x63,0xe0,0x60,0x08, ++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x62,0x54,0x0f,0xd3,0x94,0x04,0x40, ++0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74, ++0x08,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x60,0xb4,0x01, ++0x04,0x7f,0x01,0xd1,0xf6,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0xef,0x64,0x01,0x70, ++0x2e,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36,0x75,0x90, ++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x91,0xe3,0xe4,0xff,0x91,0x97, ++0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90, ++0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d, ++0x02,0x7f,0x03,0x12,0x36,0xe6,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a, ++0xe0,0x44,0x07,0xf0,0x12,0x62,0x4c,0xe5,0x60,0x20,0xe0,0x05,0xe4,0x90,0x9e,0x58, ++0xf0,0x22,0x8b,0x14,0x8a,0x15,0x89,0x16,0x12,0x60,0xb1,0xab,0x14,0xaa,0x15,0xa9, ++0x16,0x12,0x29,0xd9,0xf5,0x63,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24, ++0x03,0x70,0x40,0x7f,0x01,0x80,0x3a,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x02, ++0x12,0x42,0x20,0xfd,0xe4,0xff,0xd1,0x84,0x80,0x27,0xab,0x14,0xaa,0x15,0xa9,0x16, ++0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0xd1,0x84,0x1f,0x80,0x13,0xab,0x14, ++0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0xd1,0x84,0xe4, ++0xff,0xb1,0xbc,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x65,0x74, ++0x01,0xf0,0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x62,0xe0,0x90,0x9e,0x65,0xf0,0x80, ++0x05,0x90,0x9e,0x65,0xed,0xf0,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,0x22,0x53, ++0x61,0xf0,0x43,0x61,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x61,0xf0,0x43,0x61, ++0x02,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x12,0x74,0x53,0x90,0x9e,0xaf,0xe0,0x60,0x05, ++0x90,0x05,0x22,0xe4,0xf0,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0x90,0x06,0x04,0xe0, ++0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x60,0xb4,0x01,0x04,0xe4,0xff,0xd1,0xf6,0x53, ++0x61,0xf0,0x43,0x61,0x0c,0x22,0x8f,0x27,0x12,0x45,0xb0,0xbf,0x01,0x22,0x90,0x9e, ++0x7a,0xe0,0xff,0x7d,0x01,0x12,0x47,0x79,0xab,0x07,0xaa,0x06,0xad,0x03,0xac,0x02, ++0xaf,0x27,0x12,0x60,0x2a,0xaf,0x03,0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0, ++0x22,0x71,0xc3,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58, ++0xe5,0x64,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x62, ++0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5, ++0x64,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x64,0x30,0xe4, ++0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x9e,0x58,0xe0,0x60,0x08,0x90, ++0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x9e,0x5e,0xe0,0x60,0x08,0x90,0x01,0xb9, ++0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00, ++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00, ++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01, ++0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff, ++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0, ++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d, ++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00, ++0x55,0x74,0x40,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x9e, ++0x3f,0xe0,0x60,0x05,0x7f,0x01,0x12,0x49,0x1a,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00, ++0x55,0x74,0x80,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02, ++0x12,0x49,0x1a,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e, ++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00, ++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90, ++0x01,0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0, ++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0, ++0xf0,0xd0,0xe0,0x32,0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0x19,0xe0,0xfd,0x70,0x02,0x21,0xb5,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00, ++0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70, ++0x02,0x21,0xae,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f, ++0xe0,0x90,0x9e,0x1a,0xf0,0x75,0x23,0x01,0x75,0x24,0x9e,0x75,0x25,0x1a,0x75,0x26, ++0x01,0x7b,0x01,0x7a,0x9e,0x79,0x1b,0x12,0x45,0x09,0x90,0x9e,0x1b,0xe0,0xff,0xc4, ++0x13,0x13,0x13,0x54,0x01,0x90,0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90, ++0x00,0x88,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0, ++0x02,0x90,0x00,0x89,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0x90,0x9e, ++0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1f,0xf0, ++0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e, ++0x20,0xf0,0x80,0x33,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90, ++0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f, ++0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12, ++0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79, ++0x1c,0x31,0xb6,0x90,0x9e,0x19,0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8, ++0x06,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0xae,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01, ++0xcc,0xf0,0x90,0x9e,0xae,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x7e,0x90,0x01, ++0xc6,0xe0,0x44,0x02,0xf0,0x22,0x90,0x9e,0x21,0x12,0x43,0x8b,0xef,0x12,0x43,0x94, ++0x59,0xfc,0x01,0x59,0xf4,0x02,0x5a,0x20,0x03,0x5a,0x29,0x05,0x5a,0x32,0x06,0x5a, ++0x7e,0x07,0x5a,0x3a,0x09,0x5a,0x43,0x0b,0x5a,0x4c,0x0c,0x5a,0x55,0x0d,0x5a,0x5e, ++0x0e,0x5a,0x67,0x1b,0x5a,0x6f,0x1c,0x5a,0x05,0x2d,0x5a,0x0e,0x2e,0x5a,0x17,0x3b, ++0x00,0x00,0x5a,0x77,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xe9,0x90,0x9e,0x21,0x12, ++0x43,0x6b,0x02,0x71,0xd0,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x0b,0x90,0x9e, ++0x21,0x12,0x43,0x6b,0x02,0x72,0x53,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x8c, ++0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0xb6,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02, ++0x70,0x4a,0x90,0x9e,0x21,0x12,0x43,0x6b,0x80,0x45,0x90,0x9e,0x21,0x12,0x43,0x6b, ++0x02,0x72,0xfe,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x70,0xa2,0x90,0x9e,0x21,0x12, ++0x43,0x6b,0x02,0x49,0xc2,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x7b,0x29,0x90,0x9e, ++0x21,0x12,0x43,0x6b,0x02,0x4a,0xfc,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xef,0x90, ++0x9e,0x21,0x12,0x43,0x6b,0xe1,0xd1,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0x90, ++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54,0x07, ++0xfd,0xaf,0x06,0x90,0x9e,0x24,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b,0x90, ++0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54,0x0f, ++0x90,0x9e,0x29,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13,0x54, ++0x03,0x90,0x9e,0x2a,0xf0,0x90,0x9e,0x24,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96,0x46, ++0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x2b,0xec,0xf0,0xa3,0xed,0xf0,0xef, ++0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3,0x12, ++0x43,0x8b,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x0f, ++0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x26,0x12,0x43, ++0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0x90,0x00, ++0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42, ++0x20,0xff,0x90,0x9e,0x2b,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef,0xf0, ++0x12,0x29,0xd9,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x29,0xe0,0xfe,0x90,0x9e, ++0x24,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90,0x9e, ++0x25,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0,0x75, ++0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x2a,0xe0, ++0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x14,0xef, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x16,0x8f,0x17,0xe5, ++0x14,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x18,0x01,0xf5, ++0x19,0x89,0x1a,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf,0x82, ++0x85,0x83,0x1b,0x8f,0x1c,0xe5,0x14,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96, ++0x35,0xf0,0x75,0x1d,0x01,0xf5,0x1e,0x89,0x1f,0x74,0x82,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x5c,0x0d,0x00,0x5c,0x22,0x01,0x5c,0x37, ++0x02,0x5c,0x4c,0x03,0x5c,0x75,0x04,0x5c,0x8a,0x05,0x5c,0x9f,0x06,0x5c,0xc5,0x0c, ++0x5c,0xf2,0x0d,0x5d,0x1f,0x0e,0x5d,0x4c,0x0f,0x00,0x00,0x5d,0x80,0xe5,0x14,0x25, ++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x15, ++0x80,0x3c,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74, ++0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4, ++0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x14,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0,0xe5, ++0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0,0xa3, ++0x74,0x8f,0xf0,0xa1,0x80,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6, ++0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12,0xe5, ++0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0x74, ++0x0d,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe4, ++0xf0,0xa3,0xf0,0xa1,0x80,0x90,0x04,0x47,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12, ++0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12, ++0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x44, ++0xa1,0x77,0x90,0x04,0x4b,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90, ++0x04,0x4a,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90, ++0x04,0x49,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x48,0x80,0x58,0x90, ++0x04,0x4f,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x4e,0xe0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d,0xe0, ++0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53,0xe0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x17,0x82, ++0x85,0x16,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,0xf0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff, ++0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x12,0x29,0xd9,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03, ++0x12,0x42,0x4d,0xab,0x18,0xe5,0x1a,0x24,0x01,0xf9,0xe4,0x35,0x19,0xfa,0xc0,0x03, ++0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x90,0x00, ++0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85,0x17, ++0x82,0x85,0x16,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83, ++0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3, ++0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,0xa3,0xe0,0xfe,0xef, ++0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34, ++0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x15,0x0b,0x74,0x01,0x7e, ++0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14, ++0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x5d,0x15,0x15,0xe5,0x15,0xc3,0x94, ++0x00,0x50,0xca,0x80,0x56,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x15,0x0f,0x74,0x01,0x7e,0x00, ++0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,0x25, ++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f, ++0x4e,0x60,0x08,0x90,0x9e,0x30,0xe5,0x15,0xf0,0x80,0x10,0x15,0x15,0xe5,0x15,0xc3, ++0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x30,0xf0,0xe5,0x14,0x25,0xe0,0x24, ++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0xe4, ++0xf5,0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce, ++0xd8,0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83, ++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x31,0xe5,0x15,0xf0,0x80, ++0x5b,0x05,0x15,0xe5,0x15,0xb4,0x10,0xca,0x80,0x52,0xe5,0x14,0x25,0xe0,0x24,0x02, ++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4,0xf5, ++0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8, ++0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0, ++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x0a,0x05,0x15, ++0xe5,0x15,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x31,0xf0,0x90,0x9e,0x30,0xe0, ++0xff,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90,0x9e, ++0x31,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x49,0x12,0x43,0x5f,0xee,0xf0, ++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40,0x06, ++0x90,0x9e,0x30,0x12,0x62,0x94,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5, ++0x83,0xe0,0xff,0x90,0x9e,0x31,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x03,0x12,0x62,0x94, ++0x90,0x9e,0x30,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0, ++0x22,0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3, ++0x94,0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0, ++0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80,0xc4,0x13, ++0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x41,0x93,0x12,0x29,0xd9,0xf5,0x60,0x22,0x12, ++0x29,0xd9,0x90,0x95,0x01,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14, ++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x60,0xf5,0x64, ++0xf5,0x63,0x75,0x62,0x0c,0x75,0x61,0x0c,0x90,0x9e,0x66,0xf0,0x90,0x9e,0x64,0xf0, ++0x90,0x9e,0x63,0xf0,0x90,0x9e,0x65,0x04,0xf0,0x90,0x9e,0x56,0xf0,0xe4,0x90,0x9e, ++0x67,0xf0,0x90,0x9e,0x58,0xf0,0x90,0x9e,0x61,0x74,0x07,0xf0,0xe4,0x90,0x9e,0x57, ++0xf0,0x90,0x9e,0x5f,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x5c,0x74,0x0a,0xf0,0xa3, ++0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,0x05,0xf0,0xe4, ++0x90,0x9e,0x5a,0xf0,0x90,0x9e,0x55,0xf0,0x90,0x9e,0x7f,0xf0,0x90,0x9e,0x5e,0xf0, ++0x22,0xe4,0x90,0x9e,0x67,0xf0,0x90,0x9e,0x57,0xf0,0xf5,0x64,0x22,0x7f,0x00,0x22, ++0xe5,0x62,0x30,0xe6,0x19,0xe5,0x62,0x54,0x0f,0xff,0x90,0x9e,0x54,0xe0,0xfe,0x4f, ++0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x54,0xf0,0x53,0x62,0xbf,0x22,0xe5, ++0x60,0x64,0x01,0x70,0x68,0xe5,0x63,0x60,0x64,0xe5,0x63,0x64,0x02,0x60,0x06,0xe5, ++0x63,0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x56,0xf0,0x90,0x06,0xaa, ++0xe0,0x90,0x9e,0x65,0xf0,0x90,0x9e,0x56,0xe0,0x70,0x07,0x90,0x9e,0x65,0xe0,0xff, ++0x80,0x05,0x90,0x9e,0x56,0xe0,0xff,0x90,0x9e,0x56,0xef,0xf0,0x90,0x9e,0x58,0xe0, ++0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,0x9e,0x57,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0, ++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x64,0xfd,0x53,0x64, ++0xef,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0x22,0xe4,0xfb, ++0x90,0x9e,0x9c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,0x60,0x6a,0xe5,0x60, ++0x64,0x01,0x70,0x64,0xe5,0x63,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24,0x02,0x24, ++0xfb,0x50,0x02,0x80,0x21,0x90,0x9e,0x56,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0, ++0x60,0x14,0x90,0x9e,0x56,0xe0,0x70,0x08,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0, ++0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x2f,0x43,0x64,0x10,0xe4,0x90,0x9e,0x85, ++0xf0,0x90,0x9e,0x57,0xe0,0x75,0xf0,0x03,0xa4,0xff,0x90,0x9e,0x61,0xe0,0x2f,0x12, ++0x44,0x53,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50, ++0x07,0x7d,0x01,0x7f,0x04,0x12,0x54,0xe7,0x22,0xe4,0x90,0x9e,0x15,0xf0,0xe5,0x63, ++0x60,0x79,0x90,0x9e,0x67,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x64,0xfd,0xe5,0x64,0x54, ++0x07,0x70,0x68,0x80,0x63,0x90,0x9e,0x57,0xe0,0x04,0xf0,0x53,0x64,0xef,0x90,0x9e, ++0x15,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,0x33,0xfc,0x90,0x9e,0x57,0xe0, ++0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe, ++0x90,0x9e,0x57,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04, ++0xf0,0xe9,0xff,0x90,0x9e,0x5c,0xe0,0x2f,0xff,0xe4,0x33,0xfe,0x90,0x9e,0x57,0xe0, ++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,0x0d,0xe5,0x60,0xb4,0x01,0x0b, ++0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,0xcb,0x22,0x90,0x9e,0x5f,0xe0, ++0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e, ++0x93,0x12,0x43,0x8b,0x90,0x9e,0x96,0xe0,0x54,0xf0,0x44,0x06,0xff,0xf0,0xed,0x54, ++0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x93,0x12,0x43,0x6b, ++0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x96,0x12,0x53,0xf1,0xd0, ++0xd0,0x92,0xaf,0x22,0xe0,0xfd,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9d,0xf5, ++0x83,0xed,0xf0,0xaf,0x14,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20, ++0x50,0x0e,0x74,0x84,0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29, ++0x74,0xa6,0x2f,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x68,0xef, ++0xf0,0x24,0xa6,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x69,0xf0,0x7b, ++0x01,0x7a,0x9e,0x79,0x68,0x7d,0x02,0x51,0x57,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x0a, ++0x8d,0x0b,0xe5,0x0b,0x54,0x1f,0xf5,0x10,0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94, ++0xf5,0x83,0xe0,0xf5,0x0e,0x90,0x04,0xfd,0xe0,0xb4,0x01,0x05,0x75,0x11,0x03,0x80, ++0x03,0x75,0x11,0x01,0xeb,0xc3,0x95,0x11,0x40,0x04,0xaf,0x0a,0x80,0x33,0xe5,0x0e, ++0x25,0x0d,0xf5,0x0f,0xe5,0x10,0x90,0x41,0xd6,0x93,0xff,0xe5,0x0f,0xd3,0x9f,0x74, ++0x01,0x40,0x11,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x0b, ++0xaf,0x0a,0x41,0xa5,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe5,0x0f,0xf0, ++0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74, ++0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xe0,0x54,0x1f,0xf5,0x12,0xd3,0x9f, ++0x40,0x02,0x8f,0x12,0xe5,0x12,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x12,0x25,0xe0,0x24,0x66,0xf5,0x82, ++0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe, ++0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee, ++0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x12,0x51,0xa5,0xaf,0x12,0x22,0xac,0x07,0xec, ++0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0, ++0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5, ++0x1f,0xe5,0x1f,0x54,0x1f,0xff,0x90,0x9e,0x25,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96, ++0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x27,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,0x48, ++0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x28,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x29,0xcb,0xf0,0xa3,0xeb, ++0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3, ++0xe0,0x90,0x9e,0x2b,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e,0x40,0x0a,0x90,0x9e, ++0x28,0xe0,0x90,0x9e,0x25,0xf0,0xf5,0x1f,0xed,0x70,0x02,0xa1,0x13,0x90,0x9e,0x26, ++0xed,0xf0,0xe5,0x1f,0x30,0xe6,0x0a,0x90,0x9e,0x25,0xe0,0xf5,0x1f,0xa3,0xe0,0x14, ++0xf0,0x90,0x9e,0x26,0xe0,0x70,0x02,0xa1,0x13,0x90,0x9e,0x25,0xe0,0xff,0xd3,0x94, ++0x00,0x50,0x02,0xa1,0x13,0xe4,0x90,0x9e,0x24,0xf0,0xef,0x14,0x90,0x9e,0x23,0xf0, ++0x90,0x9e,0x27,0xe0,0xfd,0x90,0x9e,0x23,0xe0,0xff,0xd3,0x9d,0x40,0x6b,0xef,0x94, ++0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x2b,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x70,0x27,0x90,0x9e,0x23,0xe0,0xff,0xc3,0x94,0x10,0x50,0x33,0x74,0x01, ++0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90, ++0x9e,0x29,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90,0x9e,0x23,0xe0,0xf5, ++0x1f,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,0x24,0xe0,0x6f,0x60, ++0x08,0x90,0x9e,0x23,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e, ++0x24,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x23,0xe0,0xb5,0x05,0x06,0x90,0x9e,0x27, ++0xe0,0xf5,0x1f,0xe5,0x1f,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83, ++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x1f,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4, ++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef, ++0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0, ++0xa3,0xef,0xf0,0xaf,0x04,0xad,0x1f,0x51,0xa5,0xaf,0x1f,0x22,0xad,0x07,0xed,0xc3, ++0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x80, ++0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,0x1f, ++0xe5,0x1f,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0, ++0xff,0x90,0x9e,0x23,0xf0,0xed,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5, ++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x24,0xcb,0xf0,0xa3,0xeb,0xf0,0xed,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x26, ++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec,0xc3,0x9f,0x40,0x02,0xc1,0x7a, ++0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x04,0xfb,0x90,0x9e, ++0x23,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xab,0xeb,0xc3,0x94,0x10,0x40,0x21, ++0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce, ++0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x24,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70, ++0x23,0xeb,0xc3,0x94,0x10,0x50,0x40,0x74,0x01,0x7e,0x00,0xa8,0x03,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x26,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x60,0x23,0xbb,0x11,0x09,0x90,0x9e,0x25,0xe0,0x30,0xe7,0x02,0x7b,0x17, ++0xeb,0x64,0x13,0x60,0x03,0xbb,0x12,0x09,0x90,0x9e,0x24,0xe0,0x30,0xe0,0x02,0x7b, ++0x18,0xac,0x03,0x8c,0x1f,0x80,0x34,0x0b,0x80,0x84,0x90,0x9e,0x23,0xe0,0xfb,0x6c, ++0x70,0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0, ++0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x1f,0x20,0xe6, ++0x07,0xec,0x44,0x40,0xf5,0x1f,0x80,0x03,0xaf,0x1f,0x22,0xec,0x25,0xe0,0x24,0x9e, ++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25, ++0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4, ++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56, ++0x90,0x9e,0x23,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef, ++0xf0,0xac,0x07,0x8f,0x1f,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4, ++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef, ++0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0, ++0xa3,0xef,0xf0,0xaf,0x1f,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83, ++0xe4,0xf0,0xaf,0x05,0xe5,0x1f,0x44,0x80,0xfd,0x51,0xa5,0xe5,0x1f,0x44,0x80,0xff, ++0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0,0xfd, ++0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54,0x0f, ++0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0, ++0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d,0xf0, ++0x22,0xe4,0xf5,0x14,0xe5,0x14,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90, ++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09, ++0xe5,0x14,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x03,0x02,0x6e,0x6a, ++0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3, ++0xe0,0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x03,0x02,0x6e,0x6a,0xe5,0x14,0x94,0x20, ++0x40,0x09,0x90,0x9a,0xc5,0xe0,0x60,0x03,0x02,0x6e,0x76,0xe5,0x14,0x75,0xf0,0x0a, ++0xa4,0x24,0x00,0xf9,0x74,0x90,0x35,0xf0,0x75,0x18,0x01,0xf5,0x19,0x89,0x1a,0xe5, ++0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0, ++0x90,0x9e,0x1b,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82, ++0xe4,0x34,0x98,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x1d,0xcf,0xf0,0xa3,0xef, ++0xf0,0xe5,0x14,0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34, ++0x04,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x80,0x12,0x74,0xa6,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0x19,0xe0,0xfe,0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12, ++0x43,0x5f,0xe0,0x90,0x9e,0x20,0xf0,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c, ++0xf5,0x83,0xe0,0xc3,0x94,0x05,0x40,0x02,0x41,0x9f,0x90,0x9e,0x20,0xe0,0xff,0x90, ++0x9e,0x1a,0xe0,0x9f,0x40,0x13,0x90,0x9e,0x20,0xe0,0x90,0x9e,0x1a,0xf0,0xee,0x54, ++0x40,0xfe,0x90,0x9e,0x19,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x54,0x05,0x64, ++0x01,0x70,0x29,0x90,0x9e,0x1a,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40, ++0xda,0x80,0x30,0x90,0x9e,0x1a,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x1a,0xe0, ++0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5, ++0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x1a,0xe0, ++0x90,0x41,0x2e,0x93,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1f,0xe0,0x75,0xf0,0x06,0xa4, ++0x24,0x50,0xf9,0x74,0x40,0x35,0xf0,0xfa,0x7b,0xff,0x8b,0x15,0xf5,0x16,0x89,0x17, ++0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x1b, ++0xa3,0xe0,0xf5,0x1c,0x12,0x29,0xd9,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a, ++0x12,0x42,0x97,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35, ++0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x01,0x12,0x42,0x20,0xff, ++0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac, ++0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15, ++0xaa,0x16,0xa9,0x17,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef, ++0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90, ++0x00,0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00, ++0x06,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee, ++0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x04,0x12,0x42,0x20, ++0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd, ++0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab, ++0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e, ++0x1b,0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0xd3,0xe5,0x1c,0x9f,0xe5,0x1b,0x9e, ++0x40,0x0c,0xe5,0x1c,0x9f,0xf5,0x1c,0xe5,0x1b,0x9e,0xf5,0x1b,0x80,0x05,0xe4,0xf5, ++0x1b,0xf5,0x1c,0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83, ++0xe5,0x1b,0xf0,0xa3,0xe5,0x1c,0xf0,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,0x66,0xf5, ++0x82,0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,0x95,0x1b, ++0x50,0x07,0xaf,0x14,0x12,0x65,0x5c,0xa1,0x31,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24, ++0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93, ++0x95,0x1b,0x50,0x02,0xa1,0x31,0x7d,0x01,0xaf,0x14,0x12,0x63,0xbd,0xa1,0x31,0x74, ++0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02, ++0x81,0x3a,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94, ++0x19,0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,0x11, ++0x40,0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x1a,0xe0, ++0xc3,0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x1a,0xe0,0xc3,0x94, ++0x03,0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0, ++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0x74,0x44, ++0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02, ++0x61,0xe7,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0x61,0xe7,0x74,0x85,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff, ++0xe4,0x33,0xfe,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd, ++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4, ++0x33,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f, ++0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x1a,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75, ++0x1e,0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x1e,0x03,0x80,0x03,0x75, ++0x1e,0x01,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74, ++0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x14,0xf5,0x82, ++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82, ++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1a,0xe0,0xff,0x74,0x26,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x4c,0x12, ++0x43,0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x1e,0xa1,0x2c,0xec,0x64,0x06,0x60,0x02,0xa1, ++0x31,0xf5,0x1b,0xf5,0x1c,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x1b,0xe0, ++0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0x90,0x9e,0x21,0xee,0xf0,0xa3,0xef,0xf0,0x74, ++0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0xe4,0xf5,0x1d, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x75,0xf0,0x02,0xe5,0x1d,0xa4,0xf5,0x82,0x85,0xf0, ++0x83,0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x1d,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00, ++0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xc3,0x90,0x9e, ++0x22,0xe0,0x95,0x1c,0x90,0x9e,0x21,0xe0,0x95,0x1b,0x40,0x07,0x05,0x1d,0xe5,0x1d, ++0xb4,0x05,0xbd,0xe5,0x1d,0xc3,0x13,0xf5,0x1d,0xe5,0x1e,0xb4,0x01,0x06,0xe5,0x1d, ++0x70,0x46,0x80,0x13,0xe5,0x1e,0xb4,0x03,0x15,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x03, ++0x80,0x39,0xe5,0x1d,0xb4,0x01,0x05,0x75,0x1e,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x1e, ++0xb4,0x05,0x28,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x05,0x80,0x0d,0xe5,0x1d,0xb4,0x01, ++0x05,0x75,0x1e,0x03,0x80,0x03,0x75,0x1e,0x01,0xd3,0x90,0x9e,0x1e,0xe0,0x94,0x03, ++0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0xd3,0x90,0x9e,0x1e,0xe0, ++0x94,0x03,0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0x74,0x84,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0xfd,0xaf,0x14,0x12,0x67, ++0x61,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05, ++0x74,0xe6,0x50,0x0e,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0, ++0x80,0x0b,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1d, ++0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3, ++0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,0x10,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9a,0xf5,0x83,0x74,0xff,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44, ++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f, ++0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0, ++0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80, ++0x10,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xff,0xf0,0xa3, ++0xf0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4, ++0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00, ++0x08,0xe4,0xf5,0xf0,0x12,0x43,0x19,0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4, ++0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82, ++0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,0xf5, ++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x14,0xe5,0x14,0xc3,0x94, ++0x40,0x50,0x03,0x02,0x67,0xa4,0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0, ++0xf0,0xa3,0x74,0x0f,0xf0,0xa3,0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34, ++0x04,0xf5,0x83,0xe4,0xf0,0x0d,0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95, ++0x01,0x04,0xf0,0xe4,0xfd,0x75,0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4, ++0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3, ++0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75, ++0xf0,0x0a,0xed,0x90,0x90,0x06,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a, ++0xed,0x90,0x90,0x08,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82, ++0xe4,0x34,0x9d,0xf5,0x83,0x74,0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xe4,0xf0,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0, ++0xed,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0x74,0x86,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5, ++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c, ++0xf5,0x83,0xe4,0xf0,0x90,0x41,0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c, ++0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25, ++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75, ++0xf0,0x09,0xed,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed, ++0x90,0x96,0x4a,0x12,0x43,0x5f,0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34, ++0x95,0xf5,0x83,0x74,0x0c,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f, ++0x74,0xff,0xf0,0xa3,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4, ++0xf0,0xa3,0x74,0x0f,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74, ++0x13,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3, ++0x94,0x20,0x50,0x0f,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13, ++0xf0,0x80,0x0d,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0, ++0x0d,0xed,0x64,0x40,0x60,0x03,0x02,0x6e,0xa5,0x22,0x12,0x29,0xd9,0xf5,0x14,0xc3, ++0x94,0x40,0x50,0x15,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x14,0xf5, ++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xef,0xf0,0x22,0xe5,0x14,0xb4,0x40,0x0a,0x90,0x00, ++0x02,0x12,0x42,0x20,0x90,0x96,0x42,0xf0,0x22,0x90,0x9e,0x30,0x12,0x43,0x8b,0x90, ++0x9e,0x33,0xe0,0x54,0xf0,0x44,0x02,0xf0,0x54,0x0f,0x44,0xc0,0xf0,0x90,0x9e,0x30, ++0x12,0x43,0x6b,0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x33,0x02, ++0x53,0xf1,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x90,0x00,0x01,0x12,0x42,0x20,0xfc, ++0xed,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfd,0xec,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfc, ++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0, ++0xfb,0xea,0x90,0x9e,0x24,0xf0,0xeb,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82, ++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x26,0xf0,0xeb, ++0xa3,0xf0,0xa3,0xed,0xf0,0xa3,0x74,0xff,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2a,0xf0,0xeb, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa, ++0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2c,0xf0,0xeb,0xa3,0xf0,0xa3,0xec,0xf0,0xa3,0x74, ++0xff,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0x7b,0x01,0x7a,0x9e,0x79,0x24,0x01,0x79,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0x90,0x9e,0xa4,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x9e, ++0xa4,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e,0xa7, ++0xe0,0x94,0xe8,0x90,0x9e,0xa6,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44, ++0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa6,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81, ++0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x2a,0x8b,0x00,0x00,0x00, ++0x00,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x66,0xf0,0x90,0x00,0x03,0x12,0x42, ++0x20,0x90,0x9e,0x55,0xf0,0x12,0x56,0x22,0x90,0x01,0xe5,0xe5,0x63,0xf0,0x90,0x9e, ++0x66,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42, ++0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x9e,0x5c,0xf0,0x90,0x00,0x01,0x12, ++0x42,0x20,0x90,0x9e,0x5d,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5b,0xf0,0x90, ++0x00,0x03,0x12,0x42,0x20,0x90,0x9e,0x62,0xf0,0x22,0x90,0x9e,0x5c,0x74,0x0a,0xf0, ++0x90,0x9e,0x5d,0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74, ++0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x61, ++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0xef,0xf0, ++0x80,0x0f,0x90,0x9e,0x61,0x74,0x07,0xf0,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0x74,0x03, ++0xf0,0x90,0x9e,0x5f,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x9e,0x24,0x12, ++0x2a,0x8b,0x00,0x00,0x00,0x00,0x12,0x29,0xd9,0x60,0x0d,0x90,0x9e,0x5e,0xf0,0xe4, ++0xfd,0x7f,0x04,0x12,0x54,0xe7,0x80,0x05,0xe4,0x90,0x9e,0x5e,0xf0,0x90,0x9e,0x5e, ++0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf, ++0x05,0xed,0x2e,0x90,0x9e,0x78,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f, ++0x90,0x9e,0x79,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7a, ++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7b,0xf0,0x90,0x00, ++0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,0x2f,0x90,0x9e,0x7c,0xf0,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x43,0x8b,0x90,0x9e,0x24,0x12,0x43, ++0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe, ++0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12, ++0x29,0xd9,0xff,0x60,0x2d,0xb5,0x65,0x16,0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00, ++0x01,0x12,0x42,0xc2,0x65,0x67,0x70,0x04,0xe5,0x66,0x65,0xf0,0x60,0x24,0x90,0x9e, ++0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x12,0x4e,0x37, ++0x80,0x10,0x90,0x9e,0x24,0x12,0x43,0x6b,0x12,0x29,0xd9,0x65,0x65,0x60,0x03,0x12, ++0x44,0xc2,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x24,0x14,0x70,0x1a,0x7b,0x01, ++0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x71,0xb0,0xbf,0x01,0x09,0x90,0x06,0x35, ++0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0x80,0xcd,0xe4,0x90,0x06,0x34,0xf0,0x22, ++0x8e,0x14,0x8f,0x15,0x8b,0x16,0x8a,0x17,0x89,0x18,0xe4,0x90,0x9e,0x19,0xf0,0xef, ++0x90,0x00,0x31,0xf0,0x12,0x4d,0x45,0xe5,0x14,0x54,0x03,0xff,0x90,0x00,0x32,0xe0, ++0x54,0xfc,0x4f,0xf0,0x12,0x4d,0x45,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4d, ++0x45,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50, ++0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90, ++0x00,0x30,0xe0,0xab,0x16,0xaa,0x17,0xa9,0x18,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f, ++0x00,0x22,0xe4,0x90,0x9e,0xac,0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3, ++0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90, ++0x9e,0xad,0xe0,0x94,0xe8,0x90,0x9e,0xac,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22, ++0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x9e,0xac,0xe4,0x75,0xf0,0x01,0x12,0x42, ++0x81,0x80,0xc6,0x90,0x00,0x11,0xe0,0x44,0x09,0xf0,0x12,0x4d,0x45,0x90,0x9d,0xff, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9, ++0x90,0x9e,0x03,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c, ++0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0b,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00, ++0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11, ++0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x34, ++0x81,0x22,0x7f,0x78,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xff,0x12,0x2a,0x7f,0x7f, ++0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0x03,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08, ++0x12,0x27,0xde,0x90,0x9e,0x07,0x12,0x2a,0x7f,0x90,0x9e,0x80,0xe0,0x90,0x9d,0xff, ++0xb4,0x01,0x0d,0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07, ++0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78, ++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43,0x53,0xef,0x54,0x0f,0xff,0xec, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9e,0x07, ++0x12,0x43,0x53,0xef,0x44,0x02,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00, ++0x7e,0x08,0x12,0x2f,0xd9,0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9e,0x0b,0x12, ++0x2a,0x7f,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff, ++0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b, ++0x00,0x00,0x00,0x00,0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x90,0x00,0x11,0xe0,0x54, ++0xf6,0xf0,0x02,0x4d,0x45,0xef,0x70,0x02,0xe1,0x5c,0x90,0x9e,0x0f,0xe0,0x60,0x03, ++0x02,0x7b,0x28,0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xab,0x12,0x43,0x53,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xaf,0x12, ++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x9d,0xb3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x74, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbf,0x12,0x43,0x53,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc3,0x12,0x43, ++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d, ++0xc7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x9d,0xcb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd7,0x12,0x43,0x53, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdb, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x9d,0xdf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xeb,0x12,0x43,0x53,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9d,0xef,0x12, ++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x90, ++0x9d,0xf3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12, ++0x2f,0xd9,0x90,0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e,0x0f,0xe0, ++0x64,0x01,0x60,0x03,0x02,0x7b,0x28,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d, ++0xfb,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xa7,0x12,0x2a, ++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xab,0x12,0x2a,0x7f,0x7f,0x6c, ++0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xaf,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12, ++0x27,0xde,0x90,0x9d,0xb3,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90, ++0x9d,0xb7,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbb,0x12, ++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbf,0x12,0x2a,0x7f,0x7f, ++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xc3,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e, ++0x12,0x27,0xde,0x90,0x9d,0xc7,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde, ++0x90,0x9d,0xcb,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcf, ++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd3,0x12,0x2a,0x7f, ++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd7,0x12,0x2a,0x7f,0x7f,0xd8,0x7e, ++0x0e,0x12,0x27,0xde,0x90,0x9d,0xdb,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27, ++0xde,0x90,0x9d,0xdf,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d, ++0xe3,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe7,0x12,0x2a, ++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9d,0xeb,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x0d,0x12,0x27,0xde,0x90,0x9d,0xef,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12, ++0x27,0xde,0x90,0x9d,0xf3,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90, ++0x9d,0xf7,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12, ++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00, ++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25, ++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb, ++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20, ++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b, ++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a, ++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12, ++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85, ++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80, ++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f, ++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4, ++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e, ++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e, ++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x9e, ++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90, ++0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec, ++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90, ++0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec, ++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x54,0x0f,0xfd, ++0xec,0x54,0xf0,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53, ++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e, ++0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f, ++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e, ++0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90, ++0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f, ++0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08, ++0x12,0x2f,0xd9,0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90, ++0x9e,0x43,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x14, ++0xc2,0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x49,0x05,0x7d,0x40, ++0x7f,0x01,0x12,0x36,0xaf,0xe5,0x14,0x24,0xff,0x92,0xaf,0x22,0x90,0x9e,0x3a,0xe0, ++0xc3,0x94,0x14,0x50,0x05,0xe0,0x04,0xf0,0x81,0x14,0x90,0x9e,0x3a,0xe0,0x64,0x14, ++0x60,0x02,0x81,0x14,0x90,0x9e,0x49,0xe0,0x70,0x25,0x90,0x9e,0x4c,0xe0,0x70,0x1f, ++0x90,0x9e,0x4a,0xe0,0x70,0x19,0x90,0x9e,0x4d,0xe0,0x70,0x13,0x90,0x9e,0x4b,0xe0, ++0x70,0x0d,0x90,0x9e,0x4e,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90, ++0x9e,0x49,0xe0,0x90,0x04,0x44,0xf0,0x90,0x9e,0x4a,0xe0,0x90,0x04,0x45,0xf0,0x90, ++0x9e,0x4b,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x4c,0xe0,0x90,0x04, ++0x48,0xf0,0x90,0x9e,0x4d,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x4e,0xe0,0x90,0x04, ++0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x35,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x36, ++0xe0,0x90,0x04,0x4d,0xf0,0x90,0x9e,0x37,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x38, ++0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0x35,0x04,0xf0,0xe4, ++0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x49,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x19,0xf0,0x90,0x05,0x61,0xe0, ++0x90,0x9e,0x1a,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x1b,0xf0,0x90,0x05,0x63,0xe0, ++0x90,0x9e,0x1c,0xf0,0x90,0x9e,0x52,0xe0,0xff,0x90,0x9e,0x1c,0xe0,0xfe,0xd3,0x9f, ++0x50,0x0b,0x90,0x9e,0x52,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x40, ++0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x9e,0x44,0xe0,0xff,0x12,0x4c,0xf0,0x22,0x90, ++0x9e,0x53,0xe0,0x64,0x01,0x60,0x08,0x90,0x9e,0x41,0xe0,0x60,0x02,0xa1,0x36,0x90, ++0x9e,0x35,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x36, ++0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x37,0xe0, ++0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x36,0xf0,0x80,0x15,0x90, ++0x9e,0x38,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x37,0xf0, ++0x90,0x9e,0x36,0xf0,0x90,0x9e,0x35,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76, ++0xe0,0x30,0xe2,0x32,0x90,0x9e,0x49,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0, ++0x80,0x24,0x90,0x9e,0x4a,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80, ++0x11,0x90,0x9e,0x4b,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e, ++0x4a,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x4c, ++0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x4d,0xe0,0xc3, ++0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x4e,0xe0,0xc3,0x94, ++0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4c,0xf0,0x90, ++0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x00,0x37,0xda,}; ++ ++// =================== v79 UMC A Cut COMMON 2011-10-06 ===================== ++u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength] = { ++0xc1,0x88,0x02,0x00,0x4f,0x00,0x00,0x00,0x0a,0x06,0x18,0x09,0x58,0x3f,0x01,0x00, ++0x61,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x5a,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x5f,0xfb,0x00,0x00,0x00,0x00,0x00,0xa1,0xdf,0x00,0x00,0x00, ++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02, ++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09, ++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08, ++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18, ++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21, ++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20, ++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10, ++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20, ++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04, ++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04, ++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b, ++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c, ++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04, ++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04, ++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a, ++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00, ++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18, ++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50, ++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c, ++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02, ++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30, ++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0, ++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4, ++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04, ++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12, ++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02, ++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e, ++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5, ++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3, ++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01, ++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0, ++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22, ++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a, ++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a, ++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb, ++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29, ++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09, ++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8, ++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec, ++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4, ++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa, ++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82, ++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0, ++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93, ++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74, ++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x50,0xa9, ++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4, ++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f, ++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b, ++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60, ++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01, ++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93, ++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8, ++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x66, ++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x4d,0x80,0x41,0x9e,0x4e,0x80,0x41,0x9e,0xb0, ++0x00,0x00,0xf0,0x90,0x9e,0x57,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x54, ++0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x88,0xeb,0xf0,0xa3,0xe0, ++0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12,0x30,0x62,0xd0,0xd0,0x92,0xaf,0x22, ++0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x89,0xf0, ++0x90,0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91, ++0x62,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x5c, ++0x14,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94,0x0c,0x50,0x02,0xf1,0x16,0x22, ++0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x22,0x7f,0x60,0x7e, ++0x01,0x80,0xed,0x90,0x9e,0x60,0xe0,0xff,0x7d,0x01,0xe1,0x1a,0xb1,0xb1,0xbf,0x01, ++0x0f,0x90,0x9e,0x68,0xe0,0xff,0xe4,0xfd,0xf1,0xfe,0x90,0x04,0x1f,0x74,0x20,0xf0, ++0x22,0x90,0x01,0xca,0xe5,0x25,0xf0,0xef,0x60,0x03,0x12,0x4f,0x2a,0x22,0x22,0x22, ++0x22,0x22,0x00,0x02,0x60,0x8d,0x02,0x60,0x94,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x8b,0x1b,0x8a,0x1c,0x89,0x1d,0x90,0x9e,0x8b,0x71,0x8b,0xab,0x1e,0xaa,0x1f,0xa9, ++0x20,0x90,0x9e,0x8e,0x71,0x8b,0xaf,0x21,0x15,0x21,0xef,0x60,0x1b,0x90,0x9e,0x8e, ++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x24,0x62,0xff,0x90,0x9e,0x8b,0xe4,0x75,0xf0, ++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x1b,0xaa,0x1c,0xa9,0x1d,0xd0,0xd0, ++0x92,0xaf,0x22,0x90,0x06,0xa9,0xe0,0xf5,0x50,0x54,0xc0,0x70,0x0d,0x90,0x9e,0x63, ++0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0x91,0xd3,0xe5,0x50,0x30,0xe6,0x17,0x90, ++0x9e,0x63,0xe0,0x44,0x01,0xf0,0x90,0x9e,0x61,0xe0,0x64,0x02,0x60,0x04,0x91,0xdc, ++0x80,0x0b,0x91,0x80,0x80,0x07,0x90,0x9e,0x63,0xe0,0x54,0xfe,0xf0,0xe5,0x50,0x90, ++0x9e,0x63,0x30,0xe7,0x17,0xe0,0x44,0x02,0xf0,0xe4,0x90,0x9e,0x89,0x91,0x52,0x90, ++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x62,0x74,0x01,0xf0,0x22,0xe0,0x54,0xfd,0xf0, ++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05, ++0x22,0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7, ++0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0, ++0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01, ++0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74, ++0xdf,0xf0,0x74,0x45,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5, ++0x34,0xa3,0xe0,0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55, ++0x33,0xf5,0x37,0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34, ++0x30,0xe1,0x08,0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0xbc,0xe5,0x34,0x30,0xe2,0x38, ++0x90,0x01,0x3c,0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x89, ++0xe4,0xf0,0x90,0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e, ++0x01,0x91,0x62,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80, ++0x07,0x90,0x9e,0x5d,0xe4,0xf0,0x91,0xd3,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c, ++0x74,0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x89,0xe4,0xf0,0x90, ++0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x62, ++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e, ++0x5c,0xe4,0xf0,0x91,0xd3,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0, ++0x12,0x4d,0xe2,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4e, ++0x25,0xe5,0x35,0x30,0xe0,0x1a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0, ++0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x90,0x9e,0x60,0xf0,0x12,0x64,0xa1,0x91,0xd3, ++0x74,0xdf,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0, ++0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0, ++0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x7d,0x01,0x7f,0x0c,0x8f,0x71,0x8d,0x72,0xe5,0x71, ++0x54,0x0f,0xff,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0x6f,0x60,0x72,0xe5,0x71,0x30,0xe2, ++0x2b,0x90,0x9e,0x5e,0xe0,0x20,0xe2,0x05,0x7f,0x01,0x12,0x63,0x92,0x90,0x9e,0x5e, ++0xe0,0x30,0xe3,0x07,0xe5,0x71,0x20,0xe3,0x02,0x80,0x54,0x90,0x9e,0x5e,0xe0,0x20, ++0xe3,0x4c,0xe5,0x71,0x30,0xe3,0x47,0xaf,0x72,0x02,0x63,0x2e,0x90,0x9e,0x5e,0xe0, ++0x54,0x0f,0xff,0xbf,0x0c,0x0d,0xe5,0x71,0x20,0xe3,0x08,0x12,0x5e,0xf1,0xef,0x60, ++0x2d,0xf1,0x9f,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xff,0xbf,0x04,0x0e,0xe5,0x71,0x20, ++0xe2,0x09,0x12,0x62,0x50,0xef,0x60,0x16,0x12,0x48,0xaa,0x90,0x9e,0x5e,0xe0,0x54, ++0x0f,0xff,0xbf,0x02,0x09,0x12,0x62,0xbb,0xef,0x60,0x03,0x12,0x64,0x87,0x22,0x90, ++0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x73,0xb4,0x01,0x05,0x7f,0x01,0x12,0x63,0x4d, ++0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x04,0xf0,0x22,0x90,0x9e,0x62,0xe0, ++0x60,0x0e,0xe4,0xf0,0xa3,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0x07,0x70,0x2b,0x80,0x27, ++0x90,0x9e,0x51,0xe0,0x04,0xf0,0x90,0x9e,0x63,0xe0,0x54,0xef,0xf0,0x90,0x9e,0x56, ++0xe0,0xff,0x90,0x9e,0x51,0xe0,0xd3,0x9f,0x40,0x0d,0xe5,0x73,0xb4,0x01,0x0a,0xa3, ++0xe0,0x70,0x06,0xe0,0x04,0xf0,0x22,0x91,0xd3,0x22,0xe0,0xff,0x7d,0x01,0x90,0x9e, ++0x9c,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x74,0x60,0x04,0xe4, ++0xff,0x11,0x8f,0x90,0x9e,0x9c,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9e,0xe4,0xf0,0xa3, ++0x74,0x80,0xf0,0x90,0x9e,0x9c,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04, ++0x25,0xef,0xf0,0x90,0x9e,0x9d,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9e,0xa3,0xe0,0xff,0xfd,0x24, ++0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc, ++0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x9e,0x9e,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xef, ++0x60,0x0b,0x90,0x9e,0x77,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x77, ++0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x77,0x66,0x22,0x90,0x01,0x37,0x74,0x02,0xf0, ++0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x77,0x1c,0xef,0x70,0x06,0x90,0x01,0xc8,0x74, ++0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0xe5,0x74,0x60,0x04,0x7f,0x01,0x11, ++0x8f,0x11,0xdf,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x02,0xf0,0x22,0x7f, ++0x78,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xff,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c, ++0x12,0x22,0x65,0x90,0x9e,0x03,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x22,0x65, ++0x90,0x9e,0x07,0x12,0x25,0x08,0x90,0x9e,0x77,0xe0,0x90,0x9d,0xff,0xb4,0x01,0x0d, ++0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x53, ++0xef,0x54,0xc7,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12, ++0x2b,0x08,0x90,0x9e,0x03,0x12,0x43,0x53,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x9e,0x07,0x12,0x43,0x53, ++0xef,0x44,0x02,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12, ++0x2b,0x08,0x7f,0x70,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9e,0x0b,0x12,0x25,0x08,0x90, ++0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08, ++0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x30,0x2c, ++0x90,0x9e,0x77,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00, ++0x00,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80, ++0x08,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x7f,0x10,0xdf,0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x9e,0xad,0xed,0xf0,0x90,0x9e,0xac,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0, ++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00, ++0x47,0xe0,0x5f,0xf0,0x31,0xb9,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08, ++0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x31,0xb9,0x90, ++0x9e,0xad,0xe0,0x60,0x16,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x9e,0xac,0xe0,0xff, ++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45, ++0x80,0x6b,0x90,0x9e,0xac,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08, ++0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x31,0xb1,0x90,0x9e,0xac,0xe0,0xff, ++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0, ++0x4f,0xf0,0x31,0xb9,0x90,0x9e,0xad,0xe0,0x60,0x1b,0x90,0x9e,0xac,0xe0,0xff,0x74, ++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00, ++0x42,0xe0,0x4f,0x80,0x1a,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0, ++0x31,0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f, ++0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x31, ++0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60, ++0x02,0x61,0x7d,0x90,0x9e,0x1a,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd, ++0x7f,0x48,0x51,0xc1,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x51,0xc1,0x90, ++0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x9e,0x1a,0xf0,0x90, ++0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12, ++0x2b,0x08,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x45, ++0xe0,0x54,0xef,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f, ++0x46,0x80,0x38,0x90,0x9e,0x1a,0x74,0x01,0xf0,0x90,0x9e,0x20,0x12,0x43,0x53,0x90, ++0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90,0x00,0x45,0xe0, ++0x44,0x20,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45, ++0x51,0xc1,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x51,0xc1,0x22,0x90,0x00, ++0x02,0x12,0x42,0x20,0x90,0x9e,0x1c,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0, ++0x25,0xe0,0x90,0x9e,0x1b,0xf0,0x12,0x24,0x62,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x1f, ++0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x2a,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x2b, ++0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x2c,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x2d, ++0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x90,0x9e,0x1b,0xe0,0xff, ++0xd1,0xd8,0x90,0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e,0x1c,0xe0,0x70,0x02, ++0x81,0x84,0x90,0x9e,0x1b,0xe0,0x70,0x02,0x81,0x84,0x90,0x9e,0x1f,0xe0,0x70,0x02, ++0x81,0x84,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x90,0x9e,0x2e,0x74, ++0x01,0xf0,0x90,0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x51,0xb8,0x90,0x00,0x46,0xe0, ++0x44,0x01,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x20, ++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08, ++0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f, ++0x45,0x51,0xc1,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,0x2a,0xe0,0x90,0x05, ++0x84,0xf0,0x90,0x9e,0x2b,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,0x2c,0xe0,0x90,0x05, ++0x86,0xf0,0x90,0x9e,0x2d,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e, ++0x3f,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12, ++0x31,0xb7,0x80,0x2b,0x90,0x9e,0x1c,0xe0,0x70,0x2d,0x90,0x9e,0x2e,0x51,0xb7,0x90, ++0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x05,0x22,0xe4,0xf0,0xa2, ++0xaf,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x31,0x49,0x90, ++0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x59,0x8a,0x5a,0x89,0x5b,0x90,0x00, ++0x02,0x12,0x42,0x20,0x90,0x9e,0x1d,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x9e,0x14,0x74, ++0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0x16,0x12,0x25,0x08,0xab, ++0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe, ++0x78,0x1a,0x12,0x24,0xf5,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x9e,0x16, ++0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e,0x20,0x12,0x25,0x08, ++0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x14,0xf0,0x7f,0x80,0x7e,0x08, ++0x12,0x22,0x65,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x9e,0x16,0x12,0x25, ++0x08,0x90,0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e, ++0x08,0x12,0x2b,0x08,0x90,0x9e,0x1d,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x51, ++0xc1,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x51,0xc1,0x90,0x00,0x46,0xe0, ++0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x51,0xc1,0x90, ++0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x51,0xc1,0x90,0x00,0x46,0xe0,0x54,0xef, ++0xfd,0x7f,0x46,0x51,0xc1,0xe4,0x90,0x9e,0x1a,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff, ++0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd, ++0x7f,0x54,0x51,0xc1,0x7d,0xff,0x7f,0x55,0x51,0xc1,0x7d,0xff,0x7f,0x56,0x51,0xc1, ++0x7d,0xff,0x7f,0x57,0x41,0xc1,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3, ++0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x51,0xc1, ++0xe4,0xfd,0x7f,0x51,0x51,0xc1,0xe4,0xfd,0x7f,0x52,0x51,0xc1,0xe4,0xfd,0x7f,0x53, ++0x41,0xc1,0xe5,0x22,0x64,0x01,0x70,0x3c,0xf1,0xbe,0xbf,0x01,0x05,0x7f,0x01,0x12, ++0x44,0xf1,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x00,0x44, ++0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x51,0xc1,0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f, ++0x46,0x51,0xc1,0x7f,0x02,0xf1,0xea,0x8f,0x26,0x90,0x01,0xc9,0xe5,0x26,0xf0,0xb4, ++0x01,0x02,0xf1,0x2a,0x22,0x90,0x9e,0x1c,0xe0,0x64,0x01,0x60,0x02,0xc1,0xd7,0x90, ++0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x9e,0x2e,0xe0,0x70,0x31, ++0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x20,0x12,0x43,0x53,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06,0x90,0x05,0x22,0x74,0x7f, ++0xf0,0x90,0x9e,0x1b,0xe0,0xff,0xd1,0xd8,0x90,0x9e,0x2e,0x74,0x01,0x51,0xb7,0x80, ++0x3f,0x90,0x9e,0x2e,0xe0,0x64,0x01,0x70,0x37,0x90,0x9e,0x1f,0xe0,0xff,0xd1,0xd8, ++0xe4,0x90,0x9e,0x2e,0xf0,0x90,0x00,0x45,0xe0,0x44,0x01,0xfd,0x7f,0x45,0x51,0xc1, ++0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0, ++0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,0x2a,0xe0,0x90,0x05,0x84,0xf0,0x90, ++0x9e,0x2b,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,0x2c,0xe0,0x90,0x05,0x86,0xf0,0x90, ++0x9e,0x2d,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,0x05,0x60,0xe0,0x90,0x9e,0x2a,0xf0, ++0x90,0x05,0x61,0xe0,0x90,0x9e,0x2b,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x2c,0xf0, ++0x90,0x05,0x63,0xe0,0x90,0x9e,0x2d,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x2b, ++0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3, ++0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x9e,0x2d,0x80,0x03,0x90,0x9e,0x2c,0xe0, ++0x04,0xf0,0x22,0x90,0x9e,0x2b,0xe0,0x2f,0xf0,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e, ++0xb1,0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x51,0xc1,0x90,0x9e,0xb1, ++0xe0,0x44,0xb0,0xfd,0x7f,0x49,0x41,0xc1,0x8e,0x59,0x8f,0x5a,0x8b,0x5b,0x8a,0x5c, ++0x89,0x5d,0xe4,0x90,0x9e,0x34,0xf0,0xef,0x90,0x00,0x31,0xf0,0x31,0xb9,0xe5,0x59, ++0x54,0x03,0xff,0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x31,0xb9,0x90,0x00,0x33, ++0xe0,0x54,0x7f,0xf0,0x31,0xb9,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x34, ++0xe0,0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x34,0xe0,0xc3, ++0x94,0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x12,0x42, ++0x4d,0x7f,0x01,0x22,0x7f,0x00,0x22,0x12,0x45,0xb1,0xbf,0x01,0x10,0x90,0x02,0x09, ++0xe0,0xff,0x7d,0x01,0x12,0x47,0xfe,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x7f,0x0b, ++0xf1,0xea,0xef,0x65,0x25,0x60,0x10,0xe5,0x25,0xb4,0x01,0x05,0xe4,0xf5,0x25,0x80, ++0x03,0x75,0x25,0x01,0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x9e,0x74,0xf0,0x90, ++0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x41,0xc1,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0, ++0x12,0x49,0xb9,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80, ++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe, ++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff, ++0x80,0x44,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08, ++0x80,0x02,0xc3,0x33,0xd8,0xfc,0x12,0x49,0xb1,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01, ++0x7e,0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90, ++0x00,0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7, ++0x13,0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0x75,0x28,0x33,0xe4,0xf5, ++0x29,0x75,0x2a,0x03,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0, ++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x31,0xf0,0xa3,0xf0, ++0x75,0x8e,0x02,0x12,0x4f,0xda,0x12,0x5f,0xa9,0x12,0x5f,0xbc,0xe4,0xf5,0x12,0x12, ++0x6f,0xa1,0x12,0x77,0x5d,0x12,0x60,0x9b,0x12,0x2e,0x01,0x12,0x77,0x18,0x11,0x8b, ++0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a, ++0xf0,0xa3,0xe4,0xf0,0x12,0x5f,0xf4,0x12,0x5f,0x91,0x12,0x44,0xfe,0x12,0x7d,0x1d, ++0x90,0x9e,0x33,0xe5,0xd9,0xf0,0x12,0x4d,0x8b,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44, ++0x40,0xf0,0x12,0x49,0xb9,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x01,0xbe, ++0xe0,0x04,0xf0,0x90,0x01,0xc0,0xe0,0x04,0xf0,0x90,0x9e,0x31,0xe0,0x64,0x01,0xf0, ++0x24,0xa9,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x12,0x30,0xe4,0x09,0xc2, ++0xaf,0x53,0x12,0xef,0xd2,0xaf,0x31,0x8e,0xe5,0x12,0x30,0xe6,0x17,0xc2,0xaf,0x53, ++0x12,0xbf,0xd2,0xaf,0x12,0x69,0x51,0x90,0x9e,0x1e,0xe0,0xff,0x60,0x03,0xb4,0x01, ++0x03,0x12,0x7d,0x7b,0x90,0x9e,0x1e,0xe0,0x70,0x03,0x12,0x7e,0x7e,0x31,0x61,0x80, ++0xb8,0x90,0x06,0x34,0xe0,0x60,0x26,0x14,0x70,0x1b,0x7b,0x01,0x7a,0x06,0x79,0x35, ++0x7f,0xf9,0x7e,0x01,0x12,0x4f,0x48,0xbf,0x01,0x09,0x90,0x06,0x35,0xe0,0x54,0x0f, ++0xf0,0x80,0x05,0x80,0x00,0x02,0x77,0x0a,0xe4,0x90,0x06,0x34,0xf0,0x22,0x90,0x01, ++0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0x34,0xe0,0xfd,0x70,0x02,0x41, ++0xcf,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3, ++0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x41,0xc8,0x90,0x9e,0xae, ++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x35,0xf0,0x75, ++0x1e,0x01,0x75,0x1f,0x9e,0x75,0x20,0x35,0x75,0x21,0x01,0x7b,0x01,0x7a,0x9e,0x79, ++0x36,0x12,0x45,0x09,0x90,0x9e,0x36,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90, ++0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x5f,0xe0, ++0x90,0x9e,0x37,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43, ++0x5f,0xe0,0x90,0x9e,0x38,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1, ++0x12,0x43,0x5f,0xe0,0x90,0x9e,0x39,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90, ++0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0, ++0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x3b,0xf0,0x80,0x33,0xe0,0x75, ++0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x37,0xf0,0x90,0x9e,0xae, ++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x38,0xf0,0x90, ++0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x39, ++0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79,0x37,0x51,0xd0,0x90,0x9e,0x34, ++0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x9e,0xae,0xe0, ++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x21,0x98,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22, ++0x90,0x9e,0x3c,0x12,0x43,0x8b,0xef,0x12,0x43,0x94,0x53,0x0b,0x01,0x53,0x14,0x02, ++0x53,0x2f,0x03,0x53,0x38,0x05,0x53,0x41,0x06,0x53,0x8f,0x07,0x53,0x49,0x09,0x53, ++0x52,0x0c,0x53,0x5b,0x0d,0x53,0x64,0x0e,0x53,0x6d,0x1b,0x53,0x76,0x1c,0x53,0x7f, ++0x2c,0x53,0x1d,0x2d,0x53,0x26,0x2e,0x00,0x00,0x53,0x88,0x90,0x9e,0x3c,0x12,0x43, ++0x6b,0x02,0x61,0x9d,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71,0xc4,0x90,0x9e,0x3c, ++0x12,0x43,0x6b,0x02,0x71,0xca,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x72,0x12,0x90, ++0x9e,0x3c,0x12,0x43,0x6b,0x02,0x72,0x40,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71, ++0x74,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x80,0x47,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02, ++0x72,0x88,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x4b,0x7e,0x90,0x9e,0x3c,0x12,0x43, ++0x6b,0x02,0x7c,0xea,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x4c,0xb8,0x90,0x9e,0x3c, ++0x12,0x43,0x6b,0x02,0x71,0xbc,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71,0xa3,0x90, ++0x9e,0x3c,0x12,0x43,0x6b,0x02,0x75,0xea,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22, ++0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54, ++0x07,0xfd,0xaf,0x06,0x90,0x9e,0x3f,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b, ++0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54, ++0x0f,0x90,0x9e,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13, ++0x54,0x03,0x90,0x9e,0x45,0xf0,0x90,0x9e,0x3f,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96, ++0x46,0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x46,0xec,0xf0,0xa3,0xed,0xf0, ++0xef,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3, ++0x12,0x43,0x8b,0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54, ++0x0f,0xff,0x90,0x9e,0x48,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x41,0x12, ++0x43,0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x48,0x12,0x43,0x6b,0x90, ++0x00,0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x01,0x12, ++0x42,0x20,0xff,0x90,0x9e,0x46,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef, ++0xf0,0x12,0x24,0x62,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x44,0xe0,0xfe,0x90, ++0x9e,0x3f,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90, ++0x9e,0x40,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0, ++0x75,0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x45, ++0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x59, ++0xef,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x5b,0x8f,0x5c, ++0xe5,0x59,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x5d,0x01, ++0xf5,0x5e,0x89,0x5f,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf, ++0x82,0x85,0x83,0x60,0x8f,0x61,0xe5,0x59,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74, ++0x96,0x35,0xf0,0x75,0x62,0x01,0xf5,0x63,0x89,0x64,0x74,0x82,0x25,0x59,0xf5,0x82, ++0xe4,0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x55,0x1e,0x00,0x55,0x33,0x01,0x55, ++0x48,0x02,0x55,0x5d,0x03,0x55,0x86,0x04,0x55,0x9b,0x05,0x55,0xb0,0x06,0x55,0xd6, ++0x0c,0x56,0x03,0x0d,0x56,0x30,0x0e,0x56,0x5d,0x0f,0x00,0x00,0x56,0x91,0xe5,0x59, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74, ++0x15,0x80,0x3c,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83, ++0x74,0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x59,0x25, ++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0, ++0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0, ++0xa3,0x74,0x8f,0xf0,0xc1,0x91,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34, ++0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x59,0x25,0xe0,0x24, ++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12, ++0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3, ++0x74,0x0d,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83, ++0xe4,0xf0,0xa3,0xf0,0xc1,0x91,0x90,0x04,0x47,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f, ++0x12,0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01, ++0x12,0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04, ++0x44,0xc1,0x88,0x90,0x04,0x4b,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d, ++0x90,0x04,0x4a,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f, ++0x90,0x04,0x49,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x48,0x80,0x58, ++0x90,0x04,0x4f,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d,0x90,0x04,0x4e, ++0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d, ++0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53, ++0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x5d, ++0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x5c, ++0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xa3, ++0xf0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x24,0x62, ++0xff,0xab,0x62,0xaa,0x63,0xa9,0x64,0x12,0x24,0x62,0x5f,0xd0,0x01,0xd0,0x02,0xd0, ++0x03,0x12,0x42,0x4d,0xab,0x5d,0xe5,0x5f,0x24,0x01,0xf9,0xe4,0x35,0x5e,0xfa,0xc0, ++0x03,0xc0,0x02,0xc0,0x01,0x12,0x24,0x62,0xff,0xab,0x62,0xaa,0x63,0xa9,0x64,0x90, ++0x00,0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85, ++0x5c,0x82,0x85,0x5b,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x61,0x82,0x85,0x60, ++0x83,0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x5c,0x82,0x85,0x5b,0x83, ++0xa3,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x61,0x82,0x85,0x60,0x83,0xa3,0xe0,0xfe, ++0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x5a,0x0b,0x74,0x01, ++0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5, ++0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3, ++0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x5a,0x24,0x10,0x80,0x5d,0x15,0x5a,0xe5,0x5a,0xc3, ++0x94,0x00,0x50,0xca,0x80,0x56,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34, ++0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x5a,0x0f,0x74,0x01,0x7e, ++0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x59, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x60,0x08,0x90,0x9e,0x4b,0xe5,0x5a,0xf0,0x80,0x10,0x15,0x5a,0xe5,0x5a, ++0xc3,0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x4b,0xf0,0xe5,0x59,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b, ++0xe4,0xf5,0x5a,0x74,0x01,0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33, ++0xce,0xd8,0xf9,0xff,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5, ++0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x4c,0xe5,0x5a,0xf0, ++0x80,0x5b,0x05,0x5a,0xe5,0x5a,0xb4,0x10,0xca,0x80,0x52,0xe5,0x59,0x25,0xe0,0x24, ++0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4, ++0xf5,0x5a,0x74,0x01,0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce, ++0xd8,0xf9,0xff,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83, ++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x5a,0x24,0x10,0x80,0x0a,0x05, ++0x5a,0xe5,0x5a,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x4c,0xf0,0x90,0x9e,0x4b, ++0xe0,0xff,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90, ++0x9e,0x4c,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x49,0x12,0x43,0x5f,0xee, ++0xf0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40, ++0x05,0x90,0x9e,0x4b,0x11,0xe0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5, ++0x83,0xe0,0xff,0x90,0x9e,0x4c,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x02,0x11,0xe0,0x90, ++0x9e,0x4b,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0,0x22, ++0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3,0x94, ++0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0,0x22, ++0xe0,0xfd,0x74,0x26,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xed,0xf0,0xaf, ++0x59,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20,0x50,0x0e,0x74,0x84, ++0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29,0x74,0xa6,0x2f,0xf5, ++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x78,0xef,0xf0,0x24,0xa6,0xf5, ++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x79,0xf0,0x7b,0x01,0x7a,0x9e,0x79, ++0x78,0x7d,0x02,0x31,0x3a,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0x90,0x9e,0x97,0x12,0x43,0x8b,0x90,0x9e,0x9a,0xe0,0x54,0xf0,0x44,0x06,0xff, ++0xf0,0xed,0x54,0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x97, ++0x12,0x43,0x6b,0x90,0x9e,0x94,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x9a,0xd1, ++0x14,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x50,0x8d,0x51,0xe5,0x51,0x54,0x1f,0xf5,0x56, ++0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xf5,0x54,0x90,0x04,0xfd, ++0xe0,0xb4,0x01,0x05,0x75,0x57,0x03,0x80,0x03,0x75,0x57,0x01,0xeb,0xc3,0x95,0x57, ++0x40,0x04,0xaf,0x50,0x80,0x33,0xe5,0x54,0x25,0x53,0xf5,0x55,0xe5,0x56,0x90,0x41, ++0xd6,0x93,0xff,0xe5,0x55,0xd3,0x9f,0x74,0x01,0x40,0x11,0x25,0x50,0xf5,0x82,0xe4, ++0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x51,0xaf,0x50,0x01,0xf1,0x25,0x50,0xf5,0x82, ++0xe4,0x34,0x94,0xf5,0x83,0xe5,0x55,0xf0,0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90, ++0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5, ++0x83,0xe0,0x54,0x1f,0xf5,0x58,0xd3,0x9f,0x40,0x02,0x8f,0x58,0xe5,0x58,0x25,0xe0, ++0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff, ++0xe5,0x58,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93, ++0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2, ++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x58, ++0x11,0xf1,0xaf,0x58,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75, ++0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06, ++0xc0,0x07,0x90,0x01,0xc4,0x74,0x45,0xf0,0x74,0x5a,0xa3,0xf0,0x90,0x01,0x34,0xe0, ++0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b, ++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x61,0xe1,0x90,0x01,0x34,0x74,0x01,0xf0,0x85, ++0xd1,0x08,0x85,0xd2,0x09,0x85,0xd3,0x0a,0x85,0xd4,0x0b,0x85,0xd5,0x0c,0x85,0xd6, ++0x0d,0x85,0xd7,0x0e,0x85,0xd9,0x0f,0xe5,0x0f,0x54,0x40,0xc3,0x13,0xff,0xe5,0x0e, ++0x54,0x20,0x6f,0x70,0x02,0x61,0x93,0xe5,0x0f,0x30,0xe5,0x02,0x61,0x93,0xe5,0x0d, ++0x54,0x3f,0xf5,0x4d,0xe5,0x08,0x54,0x3f,0xf5,0x4e,0xe5,0x0c,0x54,0x1f,0xff,0xe5, ++0x4d,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12, ++0x42,0x81,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4, ++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4e,0xd3,0x94,0x04,0x40, ++0x03,0x75,0x4e,0x04,0x75,0xf0,0x0a,0xe5,0x4d,0x90,0x90,0x00,0x12,0x43,0x5f,0x75, ++0xf0,0x02,0xe5,0x4e,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x0e,0x54,0x1f, ++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x4d,0x90,0x90,0x00,0x12,0x43,0x5f, ++0x75,0xf0,0x02,0xe5,0x4e,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x0f,0x20, ++0xe6,0x23,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4, ++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x0a,0x30,0xe7,0x34,0xaf, ++0x4d,0x31,0xd9,0x80,0x2e,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0x44, ++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x0a,0x30, ++0xe7,0x11,0xe5,0x0a,0x54,0x7f,0xfd,0xe5,0x0e,0x54,0x1f,0xf5,0x53,0xab,0x4e,0xaf, ++0x4d,0x31,0x76,0xe5,0x74,0x14,0x24,0xfd,0x50,0x02,0x80,0x45,0x90,0x9e,0x61,0xe0, ++0x60,0x37,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0xd1,0x05,0xef, ++0x64,0x01,0x70,0x2d,0x90,0x9e,0x55,0xe0,0xf5,0x44,0x75,0x45,0x00,0xe4,0xfb,0xfd, ++0x7f,0x58,0x7e,0x01,0x12,0x30,0x62,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92, ++0x74,0x01,0xf0,0x90,0x9e,0x5d,0xf0,0x80,0x08,0xd1,0x05,0xbf,0x01,0x03,0x12,0x44, ++0xd3,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02,0xf0,0x85,0xd1,0x13,0x85, ++0xd2,0x14,0x85,0xd3,0x15,0x85,0xd4,0x16,0x85,0xd5,0x17,0x85,0xd6,0x18,0x85,0xd7, ++0x19,0x85,0xd9,0x1a,0xd1,0x9c,0xe5,0x2c,0x30,0xe3,0x06,0x90,0x01,0x34,0x74,0x08, ++0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x12,0x10,0xe5, ++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90, ++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4d,0xb6,0x90,0x00, ++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x49,0xb9,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90, ++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0, ++0x43,0x12,0x40,0x90,0x01,0x02,0xe0,0x54,0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37, ++0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,0x9e,0x66,0xe4,0xf0,0x80,0x18,0x90,0x9e, ++0x66,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0, ++0x30,0xe0,0x03,0x12,0x4f,0xa7,0xe5,0x2e,0x30,0xe0,0x12,0x90,0x9e,0x76,0x74,0x01, ++0xf0,0x90,0x01,0x36,0xf0,0x12,0x64,0xfe,0x90,0x9e,0x76,0xe4,0xf0,0xe5,0x2e,0x30, ++0xe2,0x78,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xe5,0x73, ++0x64,0x01,0x70,0x66,0xe5,0x74,0x60,0x62,0xe5,0x74,0x64,0x02,0x60,0x06,0xe5,0x74, ++0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x50,0xf0,0x90,0x06,0xaa,0xe0, ++0x90,0x9e,0x5f,0xf0,0x90,0x9e,0x50,0xe0,0x70,0x07,0x90,0x9e,0x5f,0xe0,0xff,0x80, ++0x05,0x90,0x9e,0x50,0xe0,0xff,0x90,0x9e,0x50,0xef,0xf0,0x90,0x9e,0x52,0xe0,0x60, ++0x03,0xe0,0x14,0xf0,0x90,0x9e,0x51,0xe4,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c, ++0x74,0x02,0xf0,0x90,0x9e,0x63,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xef,0xf0,0xe5,0x74, ++0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0xe5,0x2e,0x30,0xe3,0x28,0x90, ++0x01,0x36,0x74,0x08,0xf0,0xe5,0x73,0x64,0x01,0x70,0x1c,0xe5,0x74,0x60,0x18,0x90, ++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x89,0xe4,0x12,0x44, ++0x52,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2f,0x90,0x01,0x36,0x74, ++0x10,0xf0,0xe5,0x73,0x64,0x01,0x70,0x23,0xe5,0x74,0x60,0x1f,0x90,0x01,0x57,0xe4, ++0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x62,0xe4,0xf0,0x90,0x9e,0x63,0xe0, ++0x54,0xfd,0xf0,0xe0,0x54,0x07,0x70,0x03,0x12,0x44,0xd3,0xe5,0x2e,0x30,0xe5,0x1f, ++0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x73,0xb4,0x01,0x14,0xe5,0x74,0x60,0x10,0x90, ++0x9e,0x61,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xdc,0x80,0x03,0x12,0x44,0x80,0xe5, ++0x2e,0x30,0xe6,0x1e,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x73,0xb4,0x01,0x13,0xe5, ++0x74,0x60,0x0f,0x90,0x9e,0x63,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x07,0x70,0x03,0x12, ++0x44,0xd3,0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0xd1,0xbd,0x74, ++0x45,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5a,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05, ++0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83, ++0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60, ++0x02,0x7f,0x00,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x91,0x12,0x43, ++0x8b,0x90,0x9e,0x75,0xe0,0x64,0x02,0x60,0x6e,0x90,0x9e,0x75,0xe0,0x64,0x01,0x70, ++0x66,0x90,0x9e,0xb0,0xe0,0xff,0x04,0xf0,0x90,0x9e,0x91,0x12,0x43,0x6b,0x90,0x00, ++0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01,0xf1,0x3b,0xef,0x60,0x49,0x90,0x9e, ++0x91,0x12,0x43,0x6b,0x8b,0x1e,0x8a,0x1f,0x89,0x20,0x75,0x21,0x02,0x7b,0x01,0x7a, ++0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e,0x94,0x12,0x43,0x6b,0x8b,0x1e,0x8a,0x1f, ++0x89,0x20,0x90,0x9e,0x91,0x12,0x43,0x6b,0x12,0x24,0x62,0xff,0xc4,0x54,0x0f,0xf5, ++0x21,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12,0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0, ++0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x9e,0x2f,0xe0, ++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x13, ++0x90,0x9e,0x94,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79,0x2f,0xc1,0x14,0x7d,0x02,0x7f, ++0x03,0x12,0x31,0x2c,0xe5,0x74,0x14,0x24,0xfd,0x50,0x02,0x80,0x23,0x90,0x9e,0x61, ++0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0f,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3, ++0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x1a,0xe4,0xff,0x12,0x48,0x8f, ++0x22,0xd1,0x05,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x32, ++0x90,0x9e,0x5d,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x24,0x90,0x9e, ++0x5c,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x16,0x90,0x9e,0x60,0xe0, ++0x54,0x0f,0xd3,0x94,0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f, ++0x01,0x22,0x90,0x01,0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0xd3,0x10,0xaf,0x01,0xc3, ++0xc0,0xd0,0x90,0x9e,0xa0,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90, ++0x9e,0xa0,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e, ++0xa3,0xe0,0x94,0xe8,0x90,0x9e,0xa2,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0, ++0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa2,0xe4,0x75,0xf0,0x01,0x12,0x42, ++0x81,0x7f,0x0a,0x7e,0x00,0x12,0x32,0x15,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf, ++0x22,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0, ++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x90, ++0x9e,0x75,0x60,0x04,0x74,0x01,0xf0,0x22,0x74,0x02,0xf0,0x22,0x90,0x00,0xf3,0xe0, ++0x30,0xe3,0x08,0x90,0x9e,0x77,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9e,0x77,0xf0, ++0x90,0x9e,0x77,0xe0,0xb4,0x01,0x12,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x0b,0x90,0x9e, ++0x64,0x74,0xfd,0xf0,0xa3,0x74,0x33,0xf0,0x22,0x90,0x9e,0x64,0x74,0xfd,0xf0,0xa3, ++0x74,0x2f,0xf0,0x22,0x90,0x01,0x64,0x74,0xa0,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0, ++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03, ++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xfb,0xf0,0x74,0x5f, ++0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5, ++0x3d,0xe5,0x3d,0x30,0xe6,0x18,0x74,0x40,0xf0,0x90,0x9e,0x1d,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4a,0xd6,0xe5,0x3d, ++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x9e,0x1d,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4a,0xd6,0x90,0x01,0xc4,0x74,0xfb,0xf0,0x74,0x5f, ++0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01, ++0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x8f,0x6b,0x8c, ++0x6c,0x8d,0x6d,0x22,0x8f,0x6e,0x8c,0x6f,0x8d,0x70,0x22,0xe4,0xf5,0x73,0x90,0x9e, ++0x63,0xf0,0xf5,0x74,0x90,0x9e,0x60,0x74,0x0c,0xf0,0x90,0x9e,0x5e,0xf0,0xe4,0x90, ++0x9e,0x61,0xf0,0x90,0x9e,0x5d,0xf0,0x90,0x9e,0x5c,0xf0,0x90,0x9e,0x5f,0x04,0xf0, ++0x90,0x9e,0x50,0xf0,0xe4,0x90,0x9e,0x62,0xf0,0x90,0x9e,0x52,0xf0,0x90,0x9e,0x5a, ++0x74,0x07,0xf0,0xe4,0x90,0x9e,0x51,0xf0,0x90,0x9e,0x58,0xf0,0xa3,0x74,0x02,0xf0, ++0x90,0x9e,0x56,0x14,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x55,0x74,0x14,0xf0,0x90, ++0x9e,0x5b,0x74,0x05,0xf0,0xe4,0x90,0x9e,0x54,0xf0,0x90,0x9e,0x4f,0xf0,0x90,0x9e, ++0x76,0xf0,0x22,0xe4,0x90,0x9e,0x62,0xf0,0x90,0x9e,0x51,0xf0,0x90,0x9e,0x63,0xf0, ++0x22,0x8b,0x59,0x8a,0x5a,0x89,0x5b,0x31,0x03,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x12, ++0x24,0x62,0xf5,0x74,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70, ++0x40,0x7f,0x01,0x80,0x3a,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00,0x02,0x12,0x42, ++0x20,0xfd,0xe4,0xff,0x31,0x72,0x80,0x27,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00, ++0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0x72,0x1f,0x80,0x13,0xab,0x59,0xaa,0x5a, ++0xa9,0x5b,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0x72,0xe4,0xff,0x31, ++0xc6,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x5f,0x74,0x01,0xf0, ++0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x5f,0xf0,0x80,0x05,0x90, ++0x9e,0x5f,0xed,0xf0,0x90,0x9e,0x5f,0xe0,0x90,0x9e,0x50,0xf0,0x22,0xd3,0x10,0xaf, ++0x01,0xc3,0xc0,0xd0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x61,0xf0,0x90,0x00, ++0x03,0x12,0x42,0x20,0x90,0x9e,0x4f,0xf0,0x12,0x24,0x62,0x65,0x74,0x60,0x02,0x31, ++0x11,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x64,0x01,0x70,0x30,0x7d,0x7c,0x7f,0x02,0x12, ++0x31,0x2c,0x7d,0x02,0x7f,0x03,0x12,0x31,0x2c,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01, ++0x3c,0x74,0x02,0xf0,0x12,0x47,0x16,0xe4,0xff,0x12,0x48,0x8f,0x90,0x06,0x04,0xe0, ++0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7c, ++0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7c,0xff,0x12,0x31,0x9d,0x7d,0x02,0x7f,0x03,0x12, ++0x31,0x9d,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07,0xf0, ++0x90,0x9e,0x58,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0xe5,0x73,0x30,0xe0,0x1b,0x90, ++0x9e,0x52,0xe0,0x70,0x1a,0xe0,0x04,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94, ++0x04,0x50,0x0c,0x7d,0x01,0x7f,0x04,0x02,0x47,0x1a,0xe4,0x90,0x9e,0x52,0xf0,0x22, ++0x12,0x5e,0x05,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x52, ++0x90,0x9e,0x63,0xe0,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x42, ++0x90,0x9e,0x60,0xe0,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04, ++0xf0,0x80,0x2f,0x90,0x9e,0x63,0xe0,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0, ++0x80,0x20,0x90,0x9e,0x63,0xe0,0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80, ++0x11,0x90,0x9e,0x52,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x03,0x7f, ++0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,0x22,0xe5,0x12,0x60,0x08,0x90, ++0x01,0xb9,0x74,0x01,0xf0,0x80,0x5e,0x90,0x9e,0x60,0xe0,0x54,0x0f,0xd3,0x94,0x01, ++0x40,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4b,0x90,0x02,0x87,0xe0,0x60,0x08, ++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x3d,0x90,0x9e,0x75,0xe0,0xb4,0x02,0x10,0x90, ++0x9e,0x64,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x17,0x80,0x26,0x90, ++0x9e,0x75,0xe0,0xb4,0x01,0x0e,0x90,0x01,0xaf,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74, ++0x08,0xf0,0x80,0x11,0x90,0x9e,0x54,0xe0,0x70,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0, ++0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x02,0xf0,0x7f,0x00,0x22,0x90,0x06, ++0x04,0xe0,0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x73,0xb4,0x01,0x04,0xe4,0xff,0x71, ++0x4d,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x0c,0xf0,0x22,0x8f,0x76,0x90, ++0x9e,0x5e,0xe0,0x90,0x01,0xc1,0xf0,0xa3,0xe5,0x12,0xf0,0x12,0x45,0xb1,0xef,0x64, ++0x01,0x70,0x2e,0x90,0x9e,0x69,0x12,0x47,0xfa,0xe5,0x76,0x60,0x10,0x74,0x21,0x2f, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20, ++0xf0,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x71,0xb0,0x90,0x9e,0xaf,0xe0,0x60,0x05,0x90, ++0x05,0x22,0xe4,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x04,0xf0,0x22, ++0x90,0x00,0x11,0xe0,0x44,0x09,0xf0,0x12,0x49,0xb9,0x90,0x9d,0xff,0x12,0x43,0x53, ++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9e,0x03, ++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08, ++0x90,0x9e,0x07,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08, ++0x12,0x2b,0x08,0x90,0x9e,0x0b,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f, ++0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x03,0x2d,0x95, ++0xe4,0xfd,0xff,0x12,0x30,0x2c,0x90,0x9e,0x77,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68, ++0x12,0x25,0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x22,0x8f, ++0x27,0xe4,0x90,0x9e,0xa8,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7, ++0x02,0x7f,0x01,0xef,0x65,0x27,0x60,0x3e,0xc3,0x90,0x9e,0xa9,0xe0,0x94,0x88,0x90, ++0x9e,0xa8,0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90, ++0x9e,0xa8,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x32,0x15, ++0xd3,0x90,0x9e,0xa9,0xe0,0x94,0x32,0x90,0x9e,0xa8,0xe0,0x94,0x00,0x40,0xb9,0x90, ++0x01,0xc7,0xe0,0x30,0xe0,0xb2,0x22,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44, ++0x01,0xf0,0x12,0x44,0xff,0x12,0x45,0x00,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x02,0xf0, ++0x22,0x90,0x9e,0x60,0xe0,0x30,0xe6,0x1c,0xe0,0x54,0x0f,0xff,0x90,0x9e,0x4e,0xe0, ++0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x4e,0xf0,0x90,0x9e,0x60, ++0xe0,0x54,0xbf,0xf0,0x22,0x8f,0x75,0x12,0x45,0xb1,0xef,0x64,0x01,0x70,0x2e,0x90, ++0x9e,0x6a,0x12,0x47,0xfa,0xe5,0x75,0x60,0x10,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xe4,0x90, ++0x9e,0x2f,0xf0,0xe5,0x74,0x60,0x6a,0xe5,0x73,0x64,0x01,0x70,0x64,0xe5,0x74,0x14, ++0x60,0x29,0x24,0xfd,0x60,0x25,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x23,0x90,0x9e, ++0x50,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x16,0x90,0x9e,0x50,0xe0,0x70, ++0x0a,0x90,0x9e,0x5f,0xe0,0x90,0x9e,0x50,0xf0,0x80,0x00,0x90,0x9e,0x2f,0x74,0x01, ++0xf0,0x90,0x9e,0x2f,0xe0,0x60,0x2a,0x90,0x9e,0x63,0xe0,0x44,0x10,0xf0,0xe4,0x90, ++0x9e,0x89,0xf0,0x90,0x9e,0x5a,0x12,0x44,0x56,0x90,0x01,0x57,0x74,0x05,0xf0,0x90, ++0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47, ++0x1a,0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0, ++0xfd,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54, ++0x0f,0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83, ++0xe0,0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d, ++0xf0,0x22,0xad,0x07,0xed,0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4, ++0x34,0x04,0xf5,0x83,0xe0,0x80,0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5, ++0x83,0xe0,0x54,0x7f,0xf5,0x64,0xe5,0x64,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90, ++0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x90,0x9e,0x3e,0xf0,0xed,0x25,0xe0,0x24,0x02, ++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x3f,0xcb,0xf0, ++0xa3,0xeb,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0, ++0xfb,0xa3,0xe0,0x90,0x9e,0x41,0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66, ++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25, ++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec, ++0xc3,0x9f,0x40,0x02,0xc1,0xc9,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83, ++0xec,0xf0,0x04,0xfb,0x90,0x9e,0x3e,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xfa, ++0xeb,0xc3,0x94,0x10,0x40,0x21,0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07, ++0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x3f,0xe0,0x5e, ++0xfe,0xa3,0xe0,0x5f,0x4e,0x70,0x23,0xeb,0xc3,0x94,0x10,0x50,0x39,0x74,0x01,0x7e, ++0x00,0xa8,0x03,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e, ++0x41,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x1c,0xeb,0x64,0x13,0x60,0x08,0xeb, ++0x64,0x12,0x60,0x03,0xbb,0x11,0x09,0x90,0x9e,0x3f,0xe0,0x30,0xe0,0x02,0x7b,0x18, ++0xac,0x03,0x8c,0x64,0x80,0x34,0x0b,0x80,0x8b,0x90,0x9e,0x3e,0xe0,0xfb,0x6c,0x70, ++0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0,0x09, ++0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x64,0x20,0xe6,0x07, ++0xec,0x44,0x40,0xf5,0x64,0x80,0x03,0xaf,0x64,0x22,0xec,0x25,0xe0,0x24,0x9e,0xf5, ++0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0, ++0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93, ++0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34, ++0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56,0x90, ++0x9e,0x3e,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0, ++0xac,0x07,0x8f,0x64,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83, ++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34, ++0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13, ++0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3, ++0xef,0xf0,0xaf,0x64,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4, ++0xf0,0xaf,0x05,0xe5,0x64,0x44,0x80,0xfd,0x12,0x58,0xf1,0xe5,0x64,0x44,0x80,0xff, ++0x22,0xac,0x07,0xec,0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34, ++0x04,0xf5,0x83,0xe0,0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83, ++0xe0,0x54,0x7f,0xf5,0x64,0xe5,0x64,0x54,0x1f,0xff,0x90,0x9e,0x40,0xf0,0x75,0xf0, ++0x09,0xec,0x90,0x96,0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x42,0xf0,0x75,0xf0,0x09, ++0xec,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x43,0xf0,0xec,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x44, ++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5, ++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x46,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e, ++0x40,0x0a,0x90,0x9e,0x43,0xe0,0x90,0x9e,0x40,0xf0,0xf5,0x64,0xed,0x70,0x02,0x21, ++0x07,0x90,0x9e,0x41,0xed,0xf0,0xe5,0x64,0x30,0xe6,0x0a,0x90,0x9e,0x40,0xe0,0xf5, ++0x64,0xa3,0xe0,0x14,0xf0,0x90,0x9e,0x41,0xe0,0x70,0x02,0x21,0x07,0x90,0x9e,0x40, ++0xe0,0xff,0xd3,0x94,0x00,0x50,0x02,0x21,0x07,0xe4,0x90,0x9e,0x3f,0xf0,0xef,0x14, ++0x90,0x9e,0x3e,0xf0,0x90,0x9e,0x42,0xe0,0xfd,0x90,0x9e,0x3e,0xe0,0xff,0xd3,0x9d, ++0x40,0x6b,0xef,0x94,0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8, ++0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x46,0xe0, ++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70,0x27,0x90,0x9e,0x3e,0xe0,0xff,0xc3,0x94,0x10, ++0x50,0x33,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce, ++0xd8,0xf9,0xff,0x90,0x9e,0x44,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90, ++0x9e,0x3e,0xe0,0xf5,0x64,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x41,0xe0,0xff,0x90,0x9e, ++0x3f,0xe0,0x6f,0x60,0x08,0x90,0x9e,0x3e,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x41, ++0xe0,0xff,0x90,0x9e,0x3f,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x3e,0xe0,0xb5,0x05, ++0x06,0x90,0x9e,0x42,0xe0,0xf5,0x64,0xe5,0x64,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4, ++0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x64,0x25,0xe0,0x24, ++0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e, ++0xc3,0x13,0xfe,0xef,0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95, ++0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0xaf,0x04,0xad,0x64,0x12,0x58,0xf1,0xaf,0x64, ++0x22,0xe4,0xf5,0x59,0xe5,0x59,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90, ++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09, ++0xe5,0x59,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x02,0xe1,0x95,0xe5, ++0x59,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3,0xe0, ++0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x02,0xe1,0x95,0xe5,0x59,0x94,0x20,0x40,0x08, ++0x90,0x9a,0xc5,0xe0,0x60,0x02,0xe1,0xa0,0xe5,0x59,0x75,0xf0,0x0a,0xa4,0x24,0x00, ++0xf9,0x74,0x90,0x35,0xf0,0x75,0x5e,0x01,0xf5,0x5f,0x89,0x60,0xe5,0x59,0x25,0xe0, ++0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x38, ++0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x59,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98, ++0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x3a,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x59, ++0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83, ++0xe0,0x54,0x3f,0x90,0x9e,0x34,0xf0,0x80,0x12,0x74,0xa6,0x25,0x59,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0x34,0xe0,0xfe, ++0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0, ++0x90,0x9e,0x3d,0xf0,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0, ++0xc3,0x94,0x05,0x40,0x02,0x81,0x6e,0x90,0x9e,0x3d,0xe0,0xff,0x90,0x9e,0x35,0xe0, ++0x9f,0x40,0x13,0x90,0x9e,0x3d,0xe0,0x90,0x9e,0x35,0xf0,0xee,0x54,0x40,0xfe,0x90, ++0x9e,0x34,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x64,0x01,0x70,0x29,0x90,0x9e, ++0x35,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34, ++0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40,0xda,0x80,0x30,0x90,0x9e, ++0x35,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x35,0xe0,0xff,0x90,0x41,0x4a,0x93, ++0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40, ++0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x35,0xe0,0x90,0x41,0x2e,0x93,0x90, ++0x9e,0x3c,0xf0,0x90,0x9e,0x3c,0xe0,0x75,0xf0,0x06,0xa4,0x24,0x50,0xf9,0x74,0x40, ++0x35,0xf0,0x75,0x5b,0xff,0xf5,0x5c,0x89,0x5d,0x90,0x9e,0x34,0xe0,0x90,0x41,0xf2, ++0x93,0xff,0xd3,0x90,0x9e,0x3b,0xe0,0x9f,0x90,0x9e,0x3a,0xe0,0x94,0x00,0x40,0x09, ++0xe4,0xfd,0xaf,0x59,0x12,0x67,0xb1,0xe1,0x2c,0xe5,0x59,0x25,0xe0,0x24,0xc2,0xf5, ++0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x61,0xa3,0xe0,0xf5,0x62,0xab,0x5b,0xaa, ++0x5c,0xa9,0x5d,0x12,0x24,0x62,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x12, ++0x42,0x97,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61, ++0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x7e, ++0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac,0xf0, ++0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b,0xaa, ++0x5c,0xa9,0x5d,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f, ++0xa9,0x60,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25, ++0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00, ++0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x06, ++0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35, ++0x61,0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x04,0x12,0x42,0x20,0xff, ++0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd,0xac, ++0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b, ++0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e,0x38, ++0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x24,0x7b,0xd3,0xe5,0x62,0x9f,0xe5,0x61,0x9e,0x40, ++0x0c,0xe5,0x62,0x9f,0xf5,0x62,0xe5,0x61,0x9e,0xf5,0x61,0x80,0x05,0xe4,0xf5,0x61, ++0xf5,0x62,0xe5,0x59,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe5, ++0x61,0xf0,0xa3,0xe5,0x62,0xf0,0x90,0x9e,0x34,0xe0,0x25,0xe0,0x24,0x66,0xf5,0x82, ++0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x62,0xe4,0x93,0x95,0x61,0x50, ++0x07,0xaf,0x59,0x12,0x65,0xb2,0xe1,0x00,0x90,0x9e,0x34,0xe0,0x25,0xe0,0x24,0x9e, ++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x62,0xe4,0x93,0x95, ++0x61,0x50,0x02,0xe1,0x00,0x7d,0x01,0xaf,0x59,0x12,0x67,0xb1,0xe1,0x00,0x74,0xe6, ++0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02,0xc1, ++0x09,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x19, ++0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x11,0x40, ++0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x35,0xe0,0xc3, ++0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x03, ++0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0,0x74, ++0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x63,0x74,0x44,0x25, ++0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02,0xa1, ++0xb6,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0xa1,0xb6,0x74,0x85,0x25,0x59,0xf5, ++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff,0xe4, ++0x33,0xfe,0x74,0x41,0x25,0x59,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd,0xd3, ++0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4,0x33, ++0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f,0xee, ++0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x59,0xf5,0x82,0xe4,0x34, ++0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x35,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25,0x59, ++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75,0x63, ++0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x63,0x03,0x80,0x03,0x75,0x63, ++0x01,0x74,0x41,0x25,0x59,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74,0x85, ++0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5, ++0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x63,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x35,0xe0,0xff,0x74,0x26,0x25,0x59,0xf5, ++0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34, ++0x98,0xf5,0x83,0xe5,0x63,0xf0,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x4c,0x12,0x43, ++0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x63,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34, ++0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x63,0xc1,0xfb,0xec,0x64,0x06,0x60,0x02,0xe1,0x00, ++0xf5,0x61,0xf5,0x62,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x38,0xe0,0xfc, ++0xa3,0xe0,0xfd,0x12,0x24,0x7b,0x90,0x9e,0x36,0xee,0xf0,0xa3,0xef,0xf0,0x74,0x84, ++0x25,0x59,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x63,0xe4,0xf5,0x5a,0xab, ++0x5e,0xaa,0x5f,0xa9,0x60,0x75,0xf0,0x02,0xe5,0x5a,0xa4,0xf5,0x82,0x85,0xf0,0x83, ++0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x5a,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00,0x12, ++0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xc3,0x90,0x9e,0x37, ++0xe0,0x95,0x62,0x90,0x9e,0x36,0xe0,0x95,0x61,0x40,0x07,0x05,0x5a,0xe5,0x5a,0xb4, ++0x05,0xbd,0xe5,0x5a,0xc3,0x13,0xf5,0x5a,0xe5,0x63,0xb4,0x01,0x06,0xe5,0x5a,0x70, ++0x46,0x80,0x13,0xe5,0x63,0xb4,0x03,0x15,0xe5,0x5a,0x70,0x05,0x75,0x63,0x03,0x80, ++0x39,0xe5,0x5a,0xb4,0x01,0x05,0x75,0x63,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x63,0xb4, ++0x05,0x28,0xe5,0x5a,0x70,0x05,0x75,0x63,0x05,0x80,0x0d,0xe5,0x5a,0xb4,0x01,0x05, ++0x75,0x63,0x03,0x80,0x03,0x75,0x63,0x01,0xd3,0x90,0x9e,0x3b,0xe0,0x94,0x03,0x90, ++0x9e,0x3a,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x63,0xd3,0x90,0x9e,0x3b,0xe0,0x94, ++0x03,0x90,0x9e,0x3a,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x63,0x74,0x84,0x25,0x59, ++0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x63,0xf0,0xfd,0xaf,0x59,0x12,0x65,0x72, ++0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05,0x74, ++0xe6,0x50,0x0e,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0,0x80, ++0x0b,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xab,0x5e,0xaa,0x5f, ++0xa9,0x60,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00, ++0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4,0xf5,0xf0,0x12,0x43,0x19, ++0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x08,0xe4,0xf5,0xf0,0x12, ++0x43,0x19,0xe5,0x59,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4, ++0xf0,0xa3,0xf0,0xe5,0x59,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83, ++0xe4,0xf0,0xa3,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5, ++0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x59,0xe5,0x59,0xc3,0x94,0x40,0x50,0x02,0x21,0x54, ++0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0,0xf0,0xa3,0x74,0x0f,0xf0,0xa3, ++0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe4,0xf0,0x0d, ++0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95,0x01,0x04,0xf0,0xe4,0xfd,0x75, ++0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a, ++0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90, ++0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x06, ++0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x08,0x12,0x43, ++0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0x74, ++0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0x74,0x84, ++0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xed,0x25,0xe0,0x24,0x80,0xf5, ++0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc4,0xf5, ++0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc4,0xf5, ++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x44,0xf5, ++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5, ++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5, ++0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x74,0x86,0x2d,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83, ++0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x41, ++0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c,0x74,0x01,0x93,0x2f,0xff,0xe4, ++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x4b, ++0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f, ++0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0c,0xf0, ++0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f,0x74,0xff,0xf0,0xa3,0xf0,0x75, ++0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0x74,0x0f,0xf0,0x75, ++0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74,0x13,0xf0,0x75,0xf0,0x09,0xed, ++0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3,0x94,0x20,0x50,0x0f,0x74,0x84, ++0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13,0xf0,0x80,0x0d,0x74,0xa6,0x2d, ++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0,0x0d,0xed,0x64,0x40,0x60,0x03, ++0x02,0x6f,0xcf,0x22,0x12,0x24,0x62,0xf5,0x59,0xc3,0x94,0x40,0x50,0x15,0x90,0x00, ++0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83, ++0xef,0xf0,0x22,0xe5,0x59,0xb4,0x40,0x0a,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x96, ++0x42,0xf0,0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80, ++0xc4,0x13,0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x02,0x53,0xa4,0x12,0x24,0x62,0x90, ++0x95,0x01,0xf0,0x22,0x12,0x24,0x62,0xf5,0x73,0x22,0x90,0x00,0x02,0x12,0x42,0x20, ++0xff,0x30,0xe0,0x25,0x12,0x24,0x62,0x90,0x9e,0x56,0xf0,0x90,0x00,0x01,0x12,0x42, ++0x20,0x90,0x9e,0x57,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x55,0xf0,0x90,0x00, ++0x03,0x12,0x42,0x20,0x90,0x9e,0x5b,0xf0,0x22,0x90,0x9e,0x56,0x74,0x01,0xf0,0x90, ++0x9e,0x57,0x74,0x03,0xf0,0x90,0x9e,0x55,0x74,0x14,0xf0,0x90,0x9e,0x5b,0x74,0x05, ++0xf0,0x22,0x12,0x24,0x62,0x30,0xe0,0x18,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5a,0xf0, ++0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x58,0xe4,0xf0,0xa3,0xef,0xf0,0x22, ++0x90,0x9e,0x5a,0x74,0x07,0xf0,0x90,0x9e,0x58,0xe4,0xf0,0xa3,0x74,0x02,0xf0,0x22, ++0x90,0x02,0x09,0xe0,0xfd,0x12,0x24,0x62,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x9e,0x67, ++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x68,0xf0,0x90,0x00, ++0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x69,0xf0,0x90,0x00,0x03,0x12,0x42, ++0x20,0xff,0xed,0x2f,0x90,0x9e,0x6a,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae, ++0x05,0xed,0x2f,0x90,0x9e,0x6b,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90, ++0x9e,0x3f,0x12,0x43,0x8b,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42, ++0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,0x90,0x9e,0x3f,0x12,0x43,0x6b, ++0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12,0x24,0x62,0xff,0x60,0x2c,0xb5, ++0x22,0x16,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0x65,0x24, ++0x70,0x04,0xe5,0x23,0x65,0xf0,0x60,0x23,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00, ++0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x71,0x00,0x80,0x10,0x90,0x9e,0x3f,0x12,0x43, ++0x6b,0x12,0x24,0x62,0x65,0x22,0x60,0x03,0x12,0x44,0xca,0xd0,0xd0,0x92,0xaf,0x22, ++0x90,0x9e,0x42,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x22,0x01,0x8e,0x23,0xf5,0x24,0xe4, ++0xfd,0x7f,0x0b,0x71,0x44,0xe4,0xfd,0x7f,0x02,0x71,0x44,0x12,0x4f,0xbe,0xe4,0xff, ++0x12,0x44,0xf1,0xe4,0xf5,0x26,0x90,0x01,0xc9,0xe5,0x26,0xf0,0x90,0x9e,0x42,0xe0, ++0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,0x7d,0x01,0x7f,0x60,0x7e, ++0x01,0x02,0x30,0x62,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x45,0xed,0xf0, ++0x90,0x9e,0x44,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4f,0xa3,0xe0,0x70,0x1a,0x90,0x9e, ++0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff, ++0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x12, ++0x49,0xb9,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x5a,0x90,0x9e,0x44,0xe0,0x24,0xf8,0xf0, ++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80, ++0x1a,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x12,0x49,0xb9,0x90,0x9e, ++0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff, ++0x90,0x00,0x43,0xe0,0x5f,0xf0,0x12,0x49,0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x6d,0xe0,0x90,0x9e,0x40,0xf0,0x90,0x9e,0x6e, ++0xe0,0xf5,0x64,0xa3,0xe0,0xf5,0x65,0xe4,0xf5,0x61,0x74,0x70,0x25,0x61,0xf5,0x82, ++0xe4,0x34,0x9e,0xf5,0x83,0xe0,0xff,0x74,0x66,0x25,0x61,0xf8,0xa6,0x07,0x05,0x61, ++0xe5,0x61,0xb4,0x04,0xe5,0x90,0x9e,0x40,0xe0,0x12,0x43,0x94,0x74,0x6b,0x00,0x75, ++0x93,0x01,0x74,0x71,0x02,0x74,0x71,0x03,0x74,0x71,0x04,0x75,0x93,0x05,0x75,0x63, ++0x80,0x75,0x79,0x81,0x75,0x93,0x82,0x00,0x00,0x75,0x8f,0xaf,0x69,0xb1,0x9a,0xa1, ++0x93,0x90,0x9e,0x40,0xe0,0xff,0xb4,0x02,0x08,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x80, ++0x0f,0xef,0x90,0x9e,0x3f,0xb4,0x03,0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0, ++0xc3,0xe5,0x64,0x94,0x08,0x50,0x49,0xe4,0xf5,0x61,0x90,0x9e,0x3f,0xe0,0xff,0xe5, ++0x61,0xc3,0x9f,0x40,0x02,0xa1,0x93,0xc3,0xe5,0x64,0x94,0x01,0x50,0x14,0xe5,0x61, ++0x25,0x65,0xff,0xc3,0x74,0x03,0x95,0x61,0x24,0x66,0xf8,0xe6,0xfd,0x12,0x4a,0xc1, ++0x80,0x1a,0xc3,0x74,0x03,0x95,0x61,0x24,0x66,0xf8,0xe6,0xff,0xe5,0x61,0x7c,0x00, ++0x25,0x65,0xfd,0xec,0x35,0x64,0x8d,0x82,0xf5,0x83,0xef,0xf0,0x05,0x61,0x80,0xba, ++0xc3,0xe5,0x64,0x94,0x10,0x40,0x02,0xa1,0x93,0x90,0x9e,0x40,0xe0,0x64,0x04,0x60, ++0x02,0xa1,0x93,0xaf,0x67,0xfc,0xfd,0xfe,0x78,0x10,0x12,0x24,0xf5,0xc0,0x04,0xc0, ++0x05,0xc0,0x06,0xc0,0x07,0xaf,0x66,0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x24,0xf5, ++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x43,0x46,0xc0,0x04,0xc0,0x05,0xc0, ++0x06,0xc0,0x07,0xaf,0x68,0xe4,0xfc,0xfd,0xfe,0x78,0x08,0x12,0x24,0xf5,0xd0,0x03, ++0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x43,0x46,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab, ++0x07,0xaf,0x69,0xe4,0xfc,0xfd,0xfe,0x12,0x43,0x46,0xa3,0x12,0x25,0x08,0x90,0x9e, ++0x41,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0xaf,0x65,0xae,0x64,0x12,0x2b, ++0x08,0x80,0x30,0xe5,0x68,0x7f,0x00,0xfe,0xef,0x25,0x69,0xf5,0x63,0xe4,0x3e,0xf5, ++0x62,0xaf,0x63,0xfe,0x12,0x32,0x15,0x80,0x1a,0xe5,0x68,0x7f,0x00,0xfe,0xef,0x25, ++0x69,0xf5,0x63,0xe4,0x3e,0xf5,0x62,0xaf,0x63,0xfe,0x12,0x31,0x82,0x80,0x04,0x7f, ++0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x6a,0xe4,0x90,0x9e,0x45, ++0xf0,0xe5,0x6a,0x14,0xfe,0x90,0x9e,0x45,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04, ++0xfd,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x6a,0x14,0xff, ++0x7d,0xff,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe5,0x6a,0xf0,0x90,0x9e,0x45,0xe0,0xc3, ++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe0,0x04, ++0xf0,0x80,0xe8,0xad,0x6a,0x7f,0xff,0x02,0x2d,0x4d,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0xe4,0xf5,0x5b,0x75,0x5c,0x04,0xf5,0x5d,0xf5,0x5f,0xf5,0x60,0x90,0x02,0x09, ++0xe0,0xff,0x12,0x24,0x62,0xfe,0xef,0x2e,0xf5,0x5e,0x30,0xe0,0x08,0x75,0x59,0x00, ++0x75,0x5a,0x80,0x80,0x05,0xe4,0xf5,0x59,0xf5,0x5a,0xe5,0x5e,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x74,0x20,0x25,0x5b,0xf5,0x5b,0xad,0x5a,0xe5,0x5b,0x2d,0xff,0x24,0x01, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x9e,0x6d,0xf0,0x74,0x02,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x5b,0x2d,0x24,0x03,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x9e,0x6e,0xf0,0xa3,0xef, ++0xf0,0x7f,0x04,0xe5,0x5b,0x25,0x5a,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5, ++0x83,0xe0,0xfe,0x74,0x6c,0x2f,0xf5,0x82,0xe4,0x34,0x9e,0xf5,0x83,0xee,0xf0,0x0f, ++0xbf,0x08,0xe0,0x91,0x0e,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3,0xe5, ++0x60,0x94,0xe8,0xe5,0x5f,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10,0xf0, ++0x80,0x63,0x05,0x60,0xe5,0x60,0x70,0x02,0x05,0x5f,0x7f,0x0a,0x7e,0x00,0x12,0x32, ++0x15,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe,0xf0, ++0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x5b,0xb4,0x78,0x23,0xe4,0xf5,0x5b,0x05, ++0x5e,0xe5,0x5a,0x64,0x80,0x45,0x59,0x70,0x06,0xf5,0x59,0xf5,0x5a,0x80,0x06,0x75, ++0x59,0x00,0x75,0x5a,0x80,0xe5,0x5e,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06,0x74, ++0x08,0x25,0x5b,0xf5,0x5b,0xe5,0x5d,0x15,0x5d,0x70,0x02,0x15,0x5c,0xe5,0x5d,0x45, ++0x5c,0x60,0x02,0xc1,0x28,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0, ++0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0xf5,0x25,0x22,0xe4,0x90,0x9e,0xaa, ++0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70, ++0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,0x9e,0xab,0xe0,0x94,0xe8,0x90, ++0x9e,0xaa,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x32, ++0x15,0x90,0x9e,0xaa,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0x90,0x9e,0x77, ++0xe0,0x90,0x9e,0x0f,0xf0,0x22,0xef,0x70,0x03,0x02,0x79,0x1e,0x90,0x9e,0x0f,0xe0, ++0x60,0x03,0x02,0x7c,0xe9,0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25, ++0x08,0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80, ++0x96,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d,0xab,0x12,0x43, ++0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d, ++0xaf,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x6c,0x7e,0x0e,0x12,0x2b, ++0x08,0x90,0x9d,0xb3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e, ++0x0e,0x12,0x2b,0x08,0x90,0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xbf,0x12,0x43,0x53, ++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xc3, ++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08, ++0x90,0x9d,0xc7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e, ++0x12,0x2b,0x08,0x90,0x9d,0xcb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f, ++0x88,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90, ++0x80,0x96,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xd7,0x12, ++0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x2b,0x08,0x90, ++0x9d,0xdb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd8,0x7e,0x0e,0x12, ++0x2b,0x08,0x90,0x9d,0xdf,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xdc, ++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25, ++0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80, ++0x96,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xeb,0x12,0x43, ++0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x9d, ++0xef,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b, ++0x08,0x90,0x9d,0xf3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e, ++0x09,0x12,0x2b,0x08,0x90,0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x04,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e, ++0x0f,0xe0,0x64,0x01,0x60,0x02,0x81,0xe9,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90, ++0x9d,0xfb,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xa7,0x12, ++0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xab,0x12,0x25,0x08,0x7f, ++0x6c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xaf,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e, ++0x12,0x22,0x65,0x90,0x9d,0xb3,0x12,0x25,0x08,0x7f,0x74,0x7e,0x0e,0x12,0x22,0x65, ++0x90,0x9d,0xb7,0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xbb, ++0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xbf,0x12,0x25,0x08, ++0x7f,0x80,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xc3,0x12,0x25,0x08,0x7f,0x84,0x7e, ++0x0e,0x12,0x22,0x65,0x90,0x9d,0xc7,0x12,0x25,0x08,0x7f,0x88,0x7e,0x0e,0x12,0x22, ++0x65,0x90,0x9d,0xcb,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d, ++0xcf,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xd3,0x12,0x25, ++0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xd7,0x12,0x25,0x08,0x7f,0xd8, ++0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xdb,0x12,0x25,0x08,0x7f,0xdc,0x7e,0x0e,0x12, ++0x22,0x65,0x90,0x9d,0xdf,0x12,0x25,0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x22,0x65,0x90, ++0x9d,0xe3,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xe7,0x12, ++0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x9d,0xeb,0x12,0x25,0x08,0x7f, ++0x04,0x7e,0x0d,0x12,0x22,0x65,0x90,0x9d,0xef,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09, ++0x12,0x22,0x65,0x90,0x9d,0xf3,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65, ++0x90,0x9d,0xf7,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0xa4, ++0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e, ++0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x01,0x00, ++0x00,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0xdb, ++0x25,0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20, ++0xdb,0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14, ++0x20,0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25, ++0x14,0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12, ++0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96, ++0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80, ++0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90, ++0x80,0x96,0x12,0x25,0x14,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2b,0x08, ++0x90,0x80,0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2b, ++0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12, ++0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e, ++0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e, ++0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd8, ++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f, ++0xdc,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4, ++0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x24,0xdb,0x25, ++0xa4,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90, ++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e, ++0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90, ++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25, ++0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x22,0x65,0x90, ++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec, ++0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x01,0xff, ++0xec,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22, ++0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xe4,0xff,0xec, ++0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x11,0xff, ++0xec,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22, ++0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xed,0x54,0x0f, ++0xfd,0xec,0x54,0xf0,0xfc,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43, ++0x53,0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90, ++0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12, ++0x2b,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90, ++0x9e,0xa4,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa4,0x12,0x25,0x08, ++0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa4,0x12,0x25, ++0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e, ++0x08,0x12,0x2b,0x08,0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20, ++0x90,0x9e,0x1e,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5, ++0x59,0xc2,0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4a,0xc1,0x7d, ++0x40,0x7f,0x01,0x12,0x31,0x66,0xe5,0x59,0x24,0xff,0x92,0xaf,0x22,0xe4,0xfd,0x7f, ++0x45,0x12,0x4a,0xc1,0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x9e,0x1e,0xf0,0x90, ++0x9e,0x24,0xf0,0x90,0x9e,0x27,0xf0,0x90,0x9e,0x25,0xf0,0x90,0x9e,0x28,0xf0,0x90, ++0x9e,0x26,0xf0,0x90,0x9e,0x29,0xf0,0x90,0x9e,0x10,0x04,0xf0,0xe4,0xa3,0xf0,0xa3, ++0xf0,0xa3,0xf0,0x90,0x9e,0x15,0xf0,0x90,0x9e,0x1a,0xf0,0x90,0x9e,0x1c,0xf0,0x90, ++0x9e,0x2e,0xf0,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1b,0xf0,0x90,0x9e,0x14,0xf0,0x90, ++0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x02,0x4a,0xc1,0x90,0x9e,0x15,0xe0,0xc3, ++0x94,0x14,0x50,0x05,0xe0,0x04,0xf0,0xc1,0x33,0x90,0x9e,0x15,0xe0,0x64,0x14,0x60, ++0x02,0xc1,0x33,0x90,0x9e,0x24,0xe0,0x70,0x25,0x90,0x9e,0x27,0xe0,0x70,0x1f,0x90, ++0x9e,0x25,0xe0,0x70,0x19,0x90,0x9e,0x28,0xe0,0x70,0x13,0x90,0x9e,0x26,0xe0,0x70, ++0x0d,0x90,0x9e,0x29,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x9e, ++0x24,0xe0,0x90,0x04,0x44,0xf0,0x90,0x9e,0x25,0xe0,0x90,0x04,0x45,0xf0,0x90,0x9e, ++0x26,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x27,0xe0,0x90,0x04,0x48, ++0xf0,0x90,0x9e,0x28,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x29,0xe0,0x90,0x04,0x4a, ++0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x10,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x11,0xe0, ++0x90,0x04,0x4d,0xf0,0x90,0x9e,0x12,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x13,0xe0, ++0x90,0x04,0x4f,0xf0,0xe4,0x90,0x9e,0x15,0xf0,0x90,0x9e,0x10,0x04,0xf0,0xe4,0xa3, ++0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x24,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3, ++0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x34,0xf0,0x90,0x05,0x61,0xe0,0x90, ++0x9e,0x35,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x36,0xf0,0x90,0x05,0x63,0xe0,0x90, ++0x9e,0x37,0xf0,0x90,0x9e,0x2d,0xe0,0xff,0x90,0x9e,0x37,0xe0,0xfe,0xd3,0x9f,0x50, ++0x0b,0x90,0x9e,0x2d,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x1b,0xe0, ++0xb4,0x01,0x02,0x80,0x03,0x90,0x9e,0x1f,0xe0,0xff,0x12,0x4e,0xd8,0x22,0x90,0x9e, ++0x2e,0xe0,0x64,0x01,0x60,0x08,0x90,0x9e,0x1c,0xe0,0x60,0x02,0xe1,0x55,0x90,0x9e, ++0x10,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x11,0xe0, ++0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x12,0xe0,0xc3, ++0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x11,0xf0,0x80,0x15,0x90,0x9e, ++0x13,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x12,0xf0,0x90, ++0x9e,0x11,0xf0,0x90,0x9e,0x10,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0, ++0x30,0xe2,0x32,0x90,0x9e,0x24,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80, ++0x24,0x90,0x9e,0x25,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11, ++0x90,0x9e,0x26,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x25, ++0xf0,0x90,0x9e,0x24,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x27,0xe0, ++0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x28,0xe0,0xc3,0x94, ++0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x29,0xe0,0xc3,0x94,0xff, ++0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x28,0xf0,0x90,0x9e,0x27,0xf0,0x90,0x04, ++0xfd,0xe0,0x44,0x01,0xf0,0x22,0xf5,0x67,}; ++ ++// =================== v84 UMC B Cut COMMON 2012-04-13 ===================== ++u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength] = { ++0xc2,0x88,0x02,0x00,0x54,0x00,0x01,0x00,0x04,0x13,0x11,0x08,0x26,0x3d,0x01,0x00, ++0x58,0x97,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x50,0xa1,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x57,0x91,0x00,0x00,0x00,0x00,0x00,0xa1,0xe8,0x00,0x00,0x00, ++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02, ++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09, ++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08, ++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18, ++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21, ++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20, ++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10, ++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20, ++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04, ++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04, ++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b, ++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c, ++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04, ++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04, ++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a, ++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00, ++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18, ++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50, ++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c, ++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02, ++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30, ++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0, ++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4, ++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04, ++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12, ++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02, ++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e, ++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5, ++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3, ++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01, ++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0, ++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22, ++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a, ++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a, ++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb, ++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29, ++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09, ++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8, ++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec, ++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4, ++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa, ++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82, ++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0, ++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93, ++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74, ++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x48,0x29, ++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4, ++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f, ++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b, ++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60, ++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01, ++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93, ++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8, ++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x77, ++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x54,0x80,0x41,0x9e,0xb0,0x00,0x00,0xf0,0x90, ++0x9e,0x5d,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x85,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5, ++0x45,0x12,0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01, ++0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x86, ++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,0x74,0x05,0xf0, ++0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x63,0x14,0xf0,0xe5,0x61,0x54,0x0f,0xc3, ++0x94,0x0c,0x50,0x03,0x12,0x54,0xe3,0x22,0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4, ++0xf0,0x22,0xe4,0xf5,0x65,0x7f,0x60,0x7e,0x01,0x80,0xed,0x7d,0x01,0xaf,0x62,0x02, ++0x54,0xe7,0xb1,0xb0,0xbf,0x01,0x12,0x90,0x9e,0x79,0xe0,0xff,0xe4,0xfd,0xf1,0x79, ++0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xb1,0xb0,0xbf,0x01,0x0f,0x90, ++0x02,0x09,0xe0,0xff,0x7d,0x01,0xf1,0x79,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x22, ++0x22,0x22,0x00,0x02,0x45,0x03,0x02,0x45,0x06,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x8b,0x20,0x8a,0x21,0x89,0x22,0x90,0x9e,0x87,0x71,0x8b,0xab,0x23,0xaa,0x24,0xa9, ++0x25,0x90,0x9e,0x8a,0x71,0x8b,0xaf,0x26,0x15,0x26,0xef,0x60,0x1b,0x90,0x9e,0x8a, ++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x29,0xd9,0xff,0x90,0x9e,0x87,0xe4,0x75,0xf0, ++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x20,0xaa,0x21,0xa9,0x22,0xd0,0xd0, ++0x92,0xaf,0x22,0x90,0x9e,0x11,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x06,0xa9, ++0xe0,0x90,0x9e,0x10,0xf0,0xe0,0x54,0xc0,0x70,0x08,0x53,0x64,0xfe,0x53,0x64,0xfd, ++0x91,0xcb,0x90,0x9e,0x10,0xe0,0x30,0xe6,0x13,0x43,0x64,0x01,0x90,0x9e,0x66,0xe0, ++0x64,0x02,0x60,0x04,0x91,0xd2,0x80,0x07,0x91,0x79,0x80,0x03,0x53,0x64,0xfe,0x90, ++0x9e,0x10,0xe0,0x30,0xe7,0x16,0x43,0x64,0x02,0xe4,0x90,0x9e,0x85,0x91,0x4e,0x90, ++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x67,0x74,0x01,0xf0,0x22,0x53,0x64,0xfd,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,0x74,0xb0,0xf0,0x74,0x45,0xa3, ++0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,0xe0,0x54,0x90,0x60,0x07,0x90, ++0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80, ++0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82, ++0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0, ++0x05,0xc0,0x06,0xc0,0x07,0x75,0x13,0x00,0x90,0x01,0xc4,0x74,0xe8,0xf0,0x74,0x45, ++0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55, ++0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5, ++0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x09,0x90, ++0x01,0x3c,0x74,0x02,0xf0,0x12,0x61,0xc9,0xe5,0x34,0x30,0xe2,0x38,0x90,0x01,0x3c, ++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90, ++0x9e,0x5b,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x91,0x5e, ++0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x07,0x90,0x9e, ++0x64,0xe4,0xf0,0x91,0xcb,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c,0x74,0x08,0xf0, ++0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,0x9e,0x5b,0xe0, ++0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f, ++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e,0x63,0xe4,0xf0, ++0x91,0xcb,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4b,0xfb, ++0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4c,0x3d,0xe5,0x35, ++0x30,0xe0,0x44,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0, ++0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x13,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x13,0xb4, ++0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x13,0xb4,0x04,0x05,0x90,0x00,0x83,0x80, ++0x08,0xe5,0x13,0xb4,0x0c,0x06,0x90,0x00,0x83,0xe0,0xf5,0x62,0x90,0x01,0xbb,0xe5, ++0x62,0xf0,0x12,0x60,0xc0,0x91,0xcb,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74, ++0x04,0xf0,0xe5,0x35,0x30,0xe4,0x06,0x90,0x01,0x3d,0x74,0x10,0xf0,0xe5,0x36,0x30, ++0xe0,0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e, ++0x74,0x02,0xf0,0x74,0xe8,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07, ++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0, ++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x9e,0x98,0xef,0xf0,0xa3,0xed, ++0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x63,0x60,0x05,0xe4,0xff,0x12,0x54,0x97,0x90, ++0x9e,0x98,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9a,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90, ++0x9e,0x98,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90, ++0x9e,0x99,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc, ++0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9a,0xa3,0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54, ++0xf7,0xf0,0x90,0x9e,0x9a,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0x75,0x28,0x33,0xe4,0xf5, ++0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0, ++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x16,0xf0,0xa3,0xf0, ++0x75,0x8e,0x02,0xf1,0xa1,0xf1,0xe9,0x90,0x9e,0x7e,0xef,0xf0,0xf1,0xdd,0x90,0x9e, ++0x80,0xef,0xf0,0xf1,0xf6,0x90,0x9e,0x75,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57, ++0x12,0x6e,0x77,0xf1,0xd4,0x12,0x60,0x4b,0x12,0x32,0x3d,0xf1,0xc9,0x11,0x0b,0x12, ++0x50,0x0e,0xf1,0xcd,0xf1,0xb1,0x12,0x44,0xff,0xf1,0x45,0x90,0x9e,0x18,0xe5,0xd9, ++0xf0,0x11,0xd0,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0xb1,0x45,0x75,0xe8, ++0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x9e,0x16,0xe0,0x64,0x01,0xf0,0x24,0x29,0x90, ++0x01,0xc4,0xf0,0x74,0x48,0xa3,0xf0,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57, ++0xef,0xd2,0xaf,0x12,0x58,0x74,0xe5,0x57,0x30,0xe6,0x17,0xc2,0xaf,0x53,0x57,0xbf, ++0xd2,0xaf,0x12,0x67,0xa1,0x90,0x9e,0x43,0xe0,0xff,0x60,0x03,0xb4,0x01,0x03,0x12, ++0x7b,0x49,0x90,0x9e,0x43,0xe0,0x70,0x03,0x12,0x7c,0x4c,0x12,0x73,0x85,0x80,0xb6, ++0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0x31,0x05,0x7d,0xff,0x7f,0x55,0x31,0x05,0x7d, ++0xff,0x7f,0x56,0x31,0x05,0x7d,0xff,0x7f,0x57,0x80,0x0a,0xf0,0x90,0x00,0x45,0xe0, ++0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83, ++0x00,0xed,0xf0,0xb1,0x45,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60, ++0x66,0x24,0x02,0x60,0x02,0x21,0xc1,0x90,0x9e,0x3f,0x74,0x02,0xf0,0x90,0x00,0x48, ++0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f, ++0x47,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90, ++0x9e,0x3f,0xf0,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x31, ++0x05,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0, ++0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x90,0x9e,0x45, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9, ++0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x45,0xe0,0x44, ++0x10,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x31, ++0x05,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x41,0xf0,0x90,0x00,0x01,0x12, ++0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x40,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25, ++0xe0,0x90,0x9e,0x44,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61, ++0xe0,0x90,0x9e,0x50,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63, ++0xe0,0x90,0x9e,0x52,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90, ++0x9e,0x40,0xe0,0xff,0x91,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e, ++0x41,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,0x40,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e, ++0x44,0xe0,0x70,0x02,0x41,0xc8,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf, ++0x90,0x9e,0x53,0x74,0x01,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x11,0xfc, ++0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60, ++0x15,0x90,0x9e,0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e, ++0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0, ++0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e, ++0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e, ++0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf, ++0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d, ++0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2b,0x90,0x9e,0x41,0xe0,0x70,0x2d,0x90,0x9e, ++0x53,0x11,0xfb,0x90,0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x31,0x05,0x90,0x05, ++0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff, ++0x12,0x36,0x92,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x14,0x8a,0x15, ++0x89,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x42,0xf0,0xe0,0x30,0xe0,0x4b, ++0x90,0x9e,0x39,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x3b, ++0x12,0x2a,0x7f,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x01,0x12,0x42,0x20,0xff, ++0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab, ++0x07,0x90,0x9e,0x3b,0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e, ++0x45,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x39,0xf0, ++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90, ++0x9e,0x3b,0x12,0x2a,0x7f,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x42,0xe0,0x30,0xe1,0x19,0x7d, ++0x0c,0x7f,0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05, ++0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f, ++0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00, ++0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0x31,0x05,0xe4,0x90,0x9e,0x3f,0xf0,0x22,0x90, ++0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x31,0x05,0xe4,0xfd,0x7f,0x51,0x31,0x05,0xe4, ++0xfd,0x7f,0x52,0x31,0x05,0xe4,0xfd,0x7f,0x53,0x21,0x05,0xe5,0x65,0x64,0x01,0x70, ++0x3b,0xd1,0x85,0xbf,0x01,0x04,0x7f,0x01,0xd1,0x79,0x90,0x00,0x46,0xe0,0x44,0x04, ++0xfd,0x7f,0x46,0x31,0x05,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x31,0x05, ++0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x31,0x05,0x7f,0x02,0xd1,0xa1,0x8f, ++0x69,0x90,0x01,0xc9,0xe5,0x69,0xf0,0xb4,0x01,0x02,0xd1,0x19,0x22,0x90,0x9e,0x41, ++0xe0,0x64,0x01,0x60,0x02,0x81,0xef,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46, ++0x31,0x05,0x90,0x9e,0x53,0xe0,0x70,0x31,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e, ++0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f, ++0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x9e,0x40,0xe0,0xff,0x91,0xf0, ++0x90,0x9e,0x53,0x74,0x01,0x11,0xfb,0x80,0x3f,0x90,0x9e,0x53,0xe0,0x64,0x01,0x70, ++0x37,0x90,0x9e,0x44,0xe0,0xff,0x91,0xf0,0xe4,0x90,0x9e,0x53,0xf0,0x90,0x00,0x45, ++0xe0,0x44,0x01,0xfd,0x7f,0x45,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e, ++0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f, ++0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90, ++0x9e,0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90, ++0x9e,0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0x22, ++0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x50,0xf0, ++0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x52,0xf0, ++0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x50,0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0, ++0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90, ++0x9e,0x52,0x80,0x03,0x90,0x9e,0x51,0xe0,0x04,0xf0,0x22,0x90,0x9e,0x50,0xe0,0x2f, ++0xf0,0x22,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe, ++0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x2a,0xed, ++0xf0,0x90,0x9e,0x29,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90, ++0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4, ++0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0, ++0xb1,0x45,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x59,0x90,0x9e,0x29,0xe0,0x24,0xf8,0xf0, ++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80, ++0x1a,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0xb1,0x45,0x90,0x9e,0x29, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90, ++0x00,0x43,0xb1,0x42,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e,0xb1, ++0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x31,0x05,0x90,0x9e,0xb1,0xe0, ++0x44,0xb0,0xfd,0x7f,0x49,0x21,0x05,0x90,0x9e,0x27,0xee,0xf0,0xa3,0xef,0xf0,0x75, ++0x65,0x01,0x8e,0x66,0xf5,0x67,0xe4,0xfd,0x7f,0x0b,0xb1,0x55,0xe4,0xfd,0x7f,0x02, ++0xb1,0x55,0xd1,0x85,0xe4,0xff,0xd1,0x79,0xe4,0xf5,0x69,0x90,0x01,0xc9,0xe5,0x69, ++0xf0,0x90,0x9e,0x27,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45, ++0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x90,0x01,0xca,0xe5,0x68,0xf0,0xef, ++0x60,0x02,0xd1,0x19,0x22,0x7f,0x0b,0xd1,0xa1,0xef,0x65,0x68,0x60,0x10,0xe5,0x68, ++0xb4,0x01,0x05,0xe4,0xf5,0x68,0x80,0x03,0x75,0x68,0x01,0x7f,0x01,0x22,0x7f,0x00, ++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07, ++0x50,0x43,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4, ++0xff,0x90,0x00,0x46,0xb1,0x42,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8, ++0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0, ++0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13, ++0xd8,0xf8,0xff,0x80,0x4b,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f, ++0xf0,0xb1,0x45,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80, ++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x42,0xe0,0xfb,0xe4,0xfe, ++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff, ++0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x31,0x05,0x90,0x04,0xfd,0xe4,0xf0, ++0xa3,0xf0,0x90,0x9e,0x43,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x9e, ++0x4a,0xf0,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4b,0xf0,0x90,0x9e,0x4e,0xf0,0x90,0x9e, ++0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x3a,0xf0,0x90,0x9e, ++0x3f,0xf0,0x90,0x9e,0x41,0xf0,0x90,0x9e,0x53,0xf0,0x90,0x9e,0x44,0xf0,0x90,0x9e, ++0x40,0xf0,0x90,0x9e,0x39,0xf0,0x90,0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x21, ++0x05,0xe4,0x90,0x9e,0x7d,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x21, ++0x05,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0, ++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0xe4,0xf5,0x68,0x22,0x90,0x01,0x64, ++0x74,0xa0,0xf0,0x22,0x90,0x9e,0x80,0xe0,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0xf3, ++0xe0,0x7f,0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f, ++0x01,0x60,0x02,0x7f,0x00,0x22,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2, ++0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x90,0x00, ++0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3, ++0xe4,0xf0,0x22,0x90,0x01,0x02,0xe0,0x54,0x03,0xff,0xe0,0x54,0x0c,0x13,0x13,0x54, ++0x3f,0xfe,0xef,0x64,0x01,0x60,0x04,0xef,0xb4,0x03,0x10,0x90,0x9e,0x10,0x74,0x01, ++0xf0,0xa3,0x74,0x37,0xf0,0xa3,0x74,0x01,0xf0,0x80,0x1a,0xee,0x64,0x01,0x60,0x07, ++0xaf,0x06,0xee,0x64,0x03,0x70,0x49,0x90,0x9e,0x10,0x74,0x01,0xf0,0xa3,0x74,0x3d, ++0xf0,0xa3,0x74,0x40,0xf0,0x90,0x9e,0x10,0xe0,0xfe,0xa3,0xe0,0xff,0xf5,0x82,0x8e, ++0x83,0xe0,0xfd,0x90,0x9e,0x12,0xe0,0xfc,0xed,0x5c,0x60,0x0c,0x8f,0x82,0x8e,0x83, ++0xec,0xf0,0xe4,0x90,0x9e,0x77,0xf0,0x22,0x90,0x9e,0x77,0xe0,0x04,0xf0,0xe0,0xc3, ++0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x44,0xea, ++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00, ++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01, ++0xc4,0x74,0xa1,0xf0,0x74,0x50,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c, ++0xa3,0xe0,0x55,0x29,0xf5,0x2d,0xa3,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b, ++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x41,0x46,0x90,0x01,0x34,0x74,0x01,0xf0,0x85, ++0xd1,0x4d,0x85,0xd2,0x4e,0x85,0xd3,0x4f,0x85,0xd4,0x50,0x85,0xd5,0x51,0x85,0xd6, ++0x52,0x85,0xd7,0x53,0x85,0xd9,0x54,0xe5,0x54,0x54,0x40,0xc3,0x13,0xff,0xe5,0x53, ++0x54,0x20,0x6f,0x70,0x02,0x21,0xf5,0xe5,0x54,0x30,0xe5,0x02,0x21,0xf5,0xe5,0x52, ++0x54,0x3f,0xf5,0x08,0xe5,0x4d,0x54,0x3f,0xf5,0x09,0xe5,0x51,0x54,0x1f,0xff,0xe5, ++0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12, ++0x42,0x81,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4, ++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x09,0xd3,0x94,0x04,0x40, ++0x03,0x75,0x09,0x04,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,0x75, ++0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x53,0x54,0x1f, ++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f, ++0x75,0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x54,0x20, ++0xe6,0x24,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4, ++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,0x30,0xe7,0x36,0xaf, ++0x08,0x12,0x63,0x51,0x80,0x2f,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24, ++0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f, ++0x30,0xe7,0x12,0xe5,0x4f,0x54,0x7f,0xfd,0xe5,0x53,0x54,0x1f,0xf5,0x0d,0xab,0x09, ++0xaf,0x08,0x12,0x62,0xee,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x9e, ++0x66,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x71, ++0xc3,0xef,0x64,0x01,0x70,0x30,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e, ++0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x5e,0x90,0x01,0x5b,0x74, ++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x9e,0x64,0xf0,0x80,0x08,0x71,0xc3, ++0xbf,0x01,0x03,0x12,0x44,0xcb,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02, ++0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c, ++0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0xd2,0xe5,0x2c,0x30,0xe3,0x06, ++0x90,0x01,0x34,0x74,0x08,0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10, ++0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f, ++0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00, ++0x12,0x4b,0xcf,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4d,0x45,0x80,0xfe,0xe5, ++0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x12,0x90, ++0x9e,0x7f,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x61,0x4e,0x90,0x9e,0x7f,0xe4, ++0xf0,0xe5,0x2e,0x30,0xe1,0x0b,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x11, ++0x23,0xe5,0x2e,0x30,0xe2,0x09,0x90,0x01,0x36,0x74,0x04,0xf0,0x12,0x60,0xdf,0xe5, ++0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x60,0x64,0x01,0x70,0x1c, ++0xe5,0x63,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90, ++0x9e,0x85,0xe4,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4, ++0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x60,0xb4,0x01,0x20,0xe5,0x63,0x60,0x1c, ++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x67,0xe4,0xf0, ++0x53,0x64,0xfd,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,0xe5,0x2e,0x30,0xe5, ++0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x60,0xb4,0x01,0x14,0xe5,0x63,0x60,0x10, ++0x90,0x9e,0x66,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xd2,0x80,0x03,0x12,0x44,0x79, ++0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x60,0xb4,0x01,0x10, ++0xe5,0x63,0x60,0x0c,0x53,0x64,0xfe,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb, ++0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x91,0x64,0x74,0xa1,0x04, ++0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04, ++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0, ++0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f, ++0x00,0x22,0x90,0x9e,0x10,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0, ++0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x9e,0x90,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79, ++0x10,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x8d,0x12,0x43,0x8b,0x90,0x9e, ++0xb0,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01, ++0x12,0x71,0x7a,0xef,0x60,0x49,0x90,0x9e,0x8d,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24, ++0x89,0x25,0x75,0x26,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e, ++0x90,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,0x89,0x25,0x90,0x9e,0x8d,0x12,0x43,0x6b, ++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x26,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12, ++0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0, ++0xd0,0x92,0xaf,0x22,0x90,0x9e,0xa0,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63, ++0x14,0x24,0xfd,0x50,0x02,0x80,0x1f,0x90,0x9e,0x66,0xe0,0x60,0x06,0x7d,0x01,0x7f, ++0x0c,0x80,0x0d,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,0x06,0x7d,0x01,0x7f,0x04, ++0x91,0xe7,0xe4,0xff,0x91,0x97,0x22,0xef,0x60,0x0b,0x90,0x9e,0x80,0xe0,0xb4,0x01, ++0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x75, ++0x92,0x22,0x90,0x01,0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x74, ++0x12,0xef,0x70,0x06,0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36, ++0xe6,0xe5,0x63,0x60,0x04,0x7f,0x01,0x91,0x97,0x12,0x74,0xc8,0x53,0x61,0xf0,0x43, ++0x61,0x02,0x22,0x7d,0x01,0x7f,0x0c,0x8f,0x6a,0x8d,0x6b,0xe5,0x6a,0x54,0x0f,0xff, ++0xe5,0x61,0x54,0x0f,0x6f,0x60,0x65,0xe5,0x6a,0x30,0xe2,0x28,0xe5,0x61,0x20,0xe2, ++0x04,0x7f,0x01,0xd1,0xc2,0xe5,0x61,0x30,0xe3,0x0c,0xe5,0x6a,0x20,0xe3,0x07,0xb1, ++0x5d,0xef,0x60,0x48,0xa1,0xa5,0xe5,0x61,0x20,0xe3,0x41,0xe5,0x6a,0x30,0xe3,0x3c, ++0xaf,0x6b,0xc1,0xdc,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x0c,0x0c,0xe5,0x6a,0x20,0xe3, ++0x07,0xb1,0x5d,0xef,0x60,0x26,0xb1,0xa5,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x04,0x0c, ++0xe5,0x6a,0x20,0xe2,0x07,0xf1,0x21,0xef,0x60,0x12,0x91,0xb2,0xe5,0x61,0x54,0x0f, ++0xff,0xbf,0x02,0x08,0x12,0x60,0xbd,0xef,0x60,0x02,0xd1,0xaf,0x22,0x71,0xc3,0xef, ++0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x9e,0x64,0xe0, ++0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x9e,0x63,0xe0,0x60,0x08, ++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x62,0x54,0x0f,0xd3,0x94,0x04,0x40, ++0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74, ++0x08,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x60,0xb4,0x01, ++0x04,0x7f,0x01,0xd1,0xf6,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0xef,0x64,0x01,0x70, ++0x2e,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36,0x75,0x90, ++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x91,0xe3,0xe4,0xff,0x91,0x97, ++0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90, ++0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d, ++0x02,0x7f,0x03,0x12,0x36,0xe6,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a, ++0xe0,0x44,0x07,0xf0,0x12,0x62,0x4c,0xe5,0x60,0x20,0xe0,0x05,0xe4,0x90,0x9e,0x58, ++0xf0,0x22,0x8b,0x14,0x8a,0x15,0x89,0x16,0x12,0x60,0xb1,0xab,0x14,0xaa,0x15,0xa9, ++0x16,0x12,0x29,0xd9,0xf5,0x63,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24, ++0x03,0x70,0x40,0x7f,0x01,0x80,0x3a,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x02, ++0x12,0x42,0x20,0xfd,0xe4,0xff,0xd1,0x84,0x80,0x27,0xab,0x14,0xaa,0x15,0xa9,0x16, ++0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0xd1,0x84,0x1f,0x80,0x13,0xab,0x14, ++0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0xd1,0x84,0xe4, ++0xff,0xb1,0xbc,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x65,0x74, ++0x01,0xf0,0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x62,0xe0,0x90,0x9e,0x65,0xf0,0x80, ++0x05,0x90,0x9e,0x65,0xed,0xf0,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,0x22,0x53, ++0x61,0xf0,0x43,0x61,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x61,0xf0,0x43,0x61, ++0x02,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x12,0x74,0x53,0x90,0x9e,0xaf,0xe0,0x60,0x05, ++0x90,0x05,0x22,0xe4,0xf0,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0x90,0x06,0x04,0xe0, ++0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x60,0xb4,0x01,0x04,0xe4,0xff,0xd1,0xf6,0x53, ++0x61,0xf0,0x43,0x61,0x0c,0x22,0x8f,0x27,0x12,0x45,0xb0,0xbf,0x01,0x22,0x90,0x9e, ++0x7a,0xe0,0xff,0x7d,0x01,0x12,0x47,0x79,0xab,0x07,0xaa,0x06,0xad,0x03,0xac,0x02, ++0xaf,0x27,0x12,0x60,0x2a,0xaf,0x03,0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0, ++0x22,0x71,0xc3,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58, ++0xe5,0x64,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x62, ++0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5, ++0x64,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x64,0x30,0xe4, ++0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x9e,0x58,0xe0,0x60,0x08,0x90, ++0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x9e,0x5e,0xe0,0x60,0x08,0x90,0x01,0xb9, ++0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00, ++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00, ++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01, ++0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff, ++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0, ++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d, ++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00, ++0x55,0x74,0x40,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x9e, ++0x3f,0xe0,0x60,0x05,0x7f,0x01,0x12,0x49,0x1a,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00, ++0x55,0x74,0x80,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02, ++0x12,0x49,0x1a,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e, ++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00, ++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90, ++0x01,0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0, ++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0, ++0xf0,0xd0,0xe0,0x32,0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0x19,0xe0,0xfd,0x70,0x02,0x21,0xb5,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00, ++0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70, ++0x02,0x21,0xae,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f, ++0xe0,0x90,0x9e,0x1a,0xf0,0x75,0x23,0x01,0x75,0x24,0x9e,0x75,0x25,0x1a,0x75,0x26, ++0x01,0x7b,0x01,0x7a,0x9e,0x79,0x1b,0x12,0x45,0x09,0x90,0x9e,0x1b,0xe0,0xff,0xc4, ++0x13,0x13,0x13,0x54,0x01,0x90,0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90, ++0x00,0x88,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0, ++0x02,0x90,0x00,0x89,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0x90,0x9e, ++0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1f,0xf0, ++0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e, ++0x20,0xf0,0x80,0x33,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90, ++0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f, ++0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12, ++0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79, ++0x1c,0x31,0xb6,0x90,0x9e,0x19,0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8, ++0x06,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0xae,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01, ++0xcc,0xf0,0x90,0x9e,0xae,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x7e,0x90,0x01, ++0xc6,0xe0,0x44,0x02,0xf0,0x22,0x90,0x9e,0x21,0x12,0x43,0x8b,0xef,0x12,0x43,0x94, ++0x59,0xfc,0x01,0x59,0xf4,0x02,0x5a,0x20,0x03,0x5a,0x29,0x05,0x5a,0x32,0x06,0x5a, ++0x7e,0x07,0x5a,0x3a,0x09,0x5a,0x43,0x0b,0x5a,0x4c,0x0c,0x5a,0x55,0x0d,0x5a,0x5e, ++0x0e,0x5a,0x67,0x1b,0x5a,0x6f,0x1c,0x5a,0x05,0x2d,0x5a,0x0e,0x2e,0x5a,0x17,0x3b, ++0x00,0x00,0x5a,0x77,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xe9,0x90,0x9e,0x21,0x12, ++0x43,0x6b,0x02,0x71,0xd0,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x0b,0x90,0x9e, ++0x21,0x12,0x43,0x6b,0x02,0x72,0x53,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x8c, ++0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0xb6,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02, ++0x70,0x4a,0x90,0x9e,0x21,0x12,0x43,0x6b,0x80,0x45,0x90,0x9e,0x21,0x12,0x43,0x6b, ++0x02,0x72,0xfe,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x70,0xa2,0x90,0x9e,0x21,0x12, ++0x43,0x6b,0x02,0x49,0xc2,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x7b,0x16,0x90,0x9e, ++0x21,0x12,0x43,0x6b,0x02,0x4a,0xfc,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xef,0x90, ++0x9e,0x21,0x12,0x43,0x6b,0xe1,0xd1,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0x90, ++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54,0x07, ++0xfd,0xaf,0x06,0x90,0x9e,0x24,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b,0x90, ++0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54,0x0f, ++0x90,0x9e,0x29,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13,0x54, ++0x03,0x90,0x9e,0x2a,0xf0,0x90,0x9e,0x24,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96,0x46, ++0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x2b,0xec,0xf0,0xa3,0xed,0xf0,0xef, ++0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3,0x12, ++0x43,0x8b,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x0f, ++0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x26,0x12,0x43, ++0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0x90,0x00, ++0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42, ++0x20,0xff,0x90,0x9e,0x2b,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef,0xf0, ++0x12,0x29,0xd9,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x29,0xe0,0xfe,0x90,0x9e, ++0x24,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90,0x9e, ++0x25,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0,0x75, ++0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x2a,0xe0, ++0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x14,0xef, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x16,0x8f,0x17,0xe5, ++0x14,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x18,0x01,0xf5, ++0x19,0x89,0x1a,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf,0x82, ++0x85,0x83,0x1b,0x8f,0x1c,0xe5,0x14,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96, ++0x35,0xf0,0x75,0x1d,0x01,0xf5,0x1e,0x89,0x1f,0x74,0x82,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x5c,0x0d,0x00,0x5c,0x22,0x01,0x5c,0x37, ++0x02,0x5c,0x4c,0x03,0x5c,0x75,0x04,0x5c,0x8a,0x05,0x5c,0x9f,0x06,0x5c,0xc5,0x0c, ++0x5c,0xf2,0x0d,0x5d,0x1f,0x0e,0x5d,0x4c,0x0f,0x00,0x00,0x5d,0x80,0xe5,0x14,0x25, ++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x15, ++0x80,0x3c,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74, ++0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4, ++0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x14,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0,0xe5, ++0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0,0xa3, ++0x74,0x8f,0xf0,0xa1,0x80,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6, ++0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12,0xe5, ++0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0x74, ++0x0d,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe4, ++0xf0,0xa3,0xf0,0xa1,0x80,0x90,0x04,0x47,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12, ++0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12, ++0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x44, ++0xa1,0x77,0x90,0x04,0x4b,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90, ++0x04,0x4a,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90, ++0x04,0x49,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x48,0x80,0x58,0x90, ++0x04,0x4f,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x4e,0xe0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d,0xe0, ++0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53,0xe0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x17,0x82, ++0x85,0x16,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,0xf0, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff, ++0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x12,0x29,0xd9,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03, ++0x12,0x42,0x4d,0xab,0x18,0xe5,0x1a,0x24,0x01,0xf9,0xe4,0x35,0x19,0xfa,0xc0,0x03, ++0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x90,0x00, ++0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85,0x17, ++0x82,0x85,0x16,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83, ++0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3, ++0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,0xa3,0xe0,0xfe,0xef, ++0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34, ++0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x15,0x0b,0x74,0x01,0x7e, ++0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14, ++0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x5d,0x15,0x15,0xe5,0x15,0xc3,0x94, ++0x00,0x50,0xca,0x80,0x56,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x15,0x0f,0x74,0x01,0x7e,0x00, ++0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,0x25, ++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f, ++0x4e,0x60,0x08,0x90,0x9e,0x30,0xe5,0x15,0xf0,0x80,0x10,0x15,0x15,0xe5,0x15,0xc3, ++0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x30,0xf0,0xe5,0x14,0x25,0xe0,0x24, ++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0xe4, ++0xf5,0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce, ++0xd8,0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83, ++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x31,0xe5,0x15,0xf0,0x80, ++0x5b,0x05,0x15,0xe5,0x15,0xb4,0x10,0xca,0x80,0x52,0xe5,0x14,0x25,0xe0,0x24,0x02, ++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4,0xf5, ++0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8, ++0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0, ++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x0a,0x05,0x15, ++0xe5,0x15,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x31,0xf0,0x90,0x9e,0x30,0xe0, ++0xff,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90,0x9e, ++0x31,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x49,0x12,0x43,0x5f,0xee,0xf0, ++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40,0x06, ++0x90,0x9e,0x30,0x12,0x62,0x94,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5, ++0x83,0xe0,0xff,0x90,0x9e,0x31,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x03,0x12,0x62,0x94, ++0x90,0x9e,0x30,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0, ++0x22,0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3, ++0x94,0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0, ++0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80,0xc4,0x13, ++0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x41,0x93,0x12,0x29,0xd9,0xf5,0x60,0x22,0x12, ++0x29,0xd9,0x90,0x95,0x01,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14, ++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x60,0xf5,0x64, ++0xf5,0x63,0x75,0x62,0x0c,0x75,0x61,0x0c,0x90,0x9e,0x66,0xf0,0x90,0x9e,0x64,0xf0, ++0x90,0x9e,0x63,0xf0,0x90,0x9e,0x65,0x04,0xf0,0x90,0x9e,0x56,0xf0,0xe4,0x90,0x9e, ++0x67,0xf0,0x90,0x9e,0x58,0xf0,0x90,0x9e,0x61,0x74,0x07,0xf0,0xe4,0x90,0x9e,0x57, ++0xf0,0x90,0x9e,0x5f,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x5c,0x74,0x0a,0xf0,0xa3, ++0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,0x05,0xf0,0xe4, ++0x90,0x9e,0x5a,0xf0,0x90,0x9e,0x55,0xf0,0x90,0x9e,0x7f,0xf0,0x90,0x9e,0x5e,0xf0, ++0x22,0xe4,0x90,0x9e,0x67,0xf0,0x90,0x9e,0x57,0xf0,0xf5,0x64,0x22,0x7f,0x00,0x22, ++0xe5,0x62,0x30,0xe6,0x19,0xe5,0x62,0x54,0x0f,0xff,0x90,0x9e,0x54,0xe0,0xfe,0x4f, ++0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x54,0xf0,0x53,0x62,0xbf,0x22,0xe5, ++0x60,0x64,0x01,0x70,0x68,0xe5,0x63,0x60,0x64,0xe5,0x63,0x64,0x02,0x60,0x06,0xe5, ++0x63,0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x56,0xf0,0x90,0x06,0xaa, ++0xe0,0x90,0x9e,0x65,0xf0,0x90,0x9e,0x56,0xe0,0x70,0x07,0x90,0x9e,0x65,0xe0,0xff, ++0x80,0x05,0x90,0x9e,0x56,0xe0,0xff,0x90,0x9e,0x56,0xef,0xf0,0x90,0x9e,0x58,0xe0, ++0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,0x9e,0x57,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0, ++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x64,0xfd,0x53,0x64, ++0xef,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0x22,0xe4,0xfb, ++0x90,0x9e,0x9c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,0x60,0x6a,0xe5,0x60, ++0x64,0x01,0x70,0x64,0xe5,0x63,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24,0x02,0x24, ++0xfb,0x50,0x02,0x80,0x21,0x90,0x9e,0x56,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0, ++0x60,0x14,0x90,0x9e,0x56,0xe0,0x70,0x08,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0, ++0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x2f,0x43,0x64,0x10,0xe4,0x90,0x9e,0x85, ++0xf0,0x90,0x9e,0x57,0xe0,0x75,0xf0,0x03,0xa4,0xff,0x90,0x9e,0x61,0xe0,0x2f,0x12, ++0x44,0x53,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50, ++0x07,0x7d,0x01,0x7f,0x04,0x12,0x54,0xe7,0x22,0xe4,0x90,0x9e,0x15,0xf0,0xe5,0x63, ++0x60,0x79,0x90,0x9e,0x67,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x64,0xfd,0xe5,0x64,0x54, ++0x07,0x70,0x68,0x80,0x63,0x90,0x9e,0x57,0xe0,0x04,0xf0,0x53,0x64,0xef,0x90,0x9e, ++0x15,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,0x33,0xfc,0x90,0x9e,0x57,0xe0, ++0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe, ++0x90,0x9e,0x57,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04, ++0xf0,0xe9,0xff,0x90,0x9e,0x5c,0xe0,0x2f,0xff,0xe4,0x33,0xfe,0x90,0x9e,0x57,0xe0, ++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,0x0d,0xe5,0x60,0xb4,0x01,0x0b, ++0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,0xcb,0x22,0x90,0x9e,0x5f,0xe0, ++0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e, ++0x93,0x12,0x43,0x8b,0x90,0x9e,0x96,0xe0,0x54,0xf0,0x44,0x06,0xff,0xf0,0xed,0x54, ++0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x93,0x12,0x43,0x6b, ++0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x96,0x12,0x53,0xf1,0xd0, ++0xd0,0x92,0xaf,0x22,0xe0,0xfd,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9d,0xf5, ++0x83,0xed,0xf0,0xaf,0x14,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20, ++0x50,0x0e,0x74,0x84,0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29, ++0x74,0xa6,0x2f,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x68,0xef, ++0xf0,0x24,0xa6,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x69,0xf0,0x7b, ++0x01,0x7a,0x9e,0x79,0x68,0x7d,0x02,0x51,0x57,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x0a, ++0x8d,0x0b,0xe5,0x0b,0x54,0x1f,0xf5,0x10,0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94, ++0xf5,0x83,0xe0,0xf5,0x0e,0x90,0x04,0xfd,0xe0,0xb4,0x01,0x05,0x75,0x11,0x03,0x80, ++0x03,0x75,0x11,0x01,0xeb,0xc3,0x95,0x11,0x40,0x04,0xaf,0x0a,0x80,0x33,0xe5,0x0e, ++0x25,0x0d,0xf5,0x0f,0xe5,0x10,0x90,0x41,0xd6,0x93,0xff,0xe5,0x0f,0xd3,0x9f,0x74, ++0x01,0x40,0x11,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x0b, ++0xaf,0x0a,0x41,0xa5,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe5,0x0f,0xf0, ++0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74, ++0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xe0,0x54,0x1f,0xf5,0x12,0xd3,0x9f, ++0x40,0x02,0x8f,0x12,0xe5,0x12,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x12,0x25,0xe0,0x24,0x66,0xf5,0x82, ++0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe, ++0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee, ++0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x12,0x51,0xa5,0xaf,0x12,0x22,0xac,0x07,0xec, ++0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0, ++0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5, ++0x1f,0xe5,0x1f,0x54,0x1f,0xff,0x90,0x9e,0x25,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96, ++0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x27,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,0x48, ++0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x28,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x29,0xcb,0xf0,0xa3,0xeb, ++0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3, ++0xe0,0x90,0x9e,0x2b,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e,0x40,0x0a,0x90,0x9e, ++0x28,0xe0,0x90,0x9e,0x25,0xf0,0xf5,0x1f,0xed,0x70,0x02,0xa1,0x13,0x90,0x9e,0x26, ++0xed,0xf0,0xe5,0x1f,0x30,0xe6,0x0a,0x90,0x9e,0x25,0xe0,0xf5,0x1f,0xa3,0xe0,0x14, ++0xf0,0x90,0x9e,0x26,0xe0,0x70,0x02,0xa1,0x13,0x90,0x9e,0x25,0xe0,0xff,0xd3,0x94, ++0x00,0x50,0x02,0xa1,0x13,0xe4,0x90,0x9e,0x24,0xf0,0xef,0x14,0x90,0x9e,0x23,0xf0, ++0x90,0x9e,0x27,0xe0,0xfd,0x90,0x9e,0x23,0xe0,0xff,0xd3,0x9d,0x40,0x6b,0xef,0x94, ++0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x2b,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x70,0x27,0x90,0x9e,0x23,0xe0,0xff,0xc3,0x94,0x10,0x50,0x33,0x74,0x01, ++0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90, ++0x9e,0x29,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90,0x9e,0x23,0xe0,0xf5, ++0x1f,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,0x24,0xe0,0x6f,0x60, ++0x08,0x90,0x9e,0x23,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e, ++0x24,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x23,0xe0,0xb5,0x05,0x06,0x90,0x9e,0x27, ++0xe0,0xf5,0x1f,0xe5,0x1f,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83, ++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x1f,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4, ++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef, ++0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0, ++0xa3,0xef,0xf0,0xaf,0x04,0xad,0x1f,0x51,0xa5,0xaf,0x1f,0x22,0xad,0x07,0xed,0xc3, ++0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x80, ++0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,0x1f, ++0xe5,0x1f,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0, ++0xff,0x90,0x9e,0x23,0xf0,0xed,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5, ++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x24,0xcb,0xf0,0xa3,0xeb,0xf0,0xed,0x25,0xe0, ++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x26, ++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec,0xc3,0x9f,0x40,0x02,0xc1,0x7a, ++0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x04,0xfb,0x90,0x9e, ++0x23,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xab,0xeb,0xc3,0x94,0x10,0x40,0x21, ++0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce, ++0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x24,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70, ++0x23,0xeb,0xc3,0x94,0x10,0x50,0x40,0x74,0x01,0x7e,0x00,0xa8,0x03,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x26,0xe0,0x5e,0xfe,0xa3,0xe0, ++0x5f,0x4e,0x60,0x23,0xbb,0x11,0x09,0x90,0x9e,0x25,0xe0,0x30,0xe7,0x02,0x7b,0x17, ++0xeb,0x64,0x13,0x60,0x03,0xbb,0x12,0x09,0x90,0x9e,0x24,0xe0,0x30,0xe0,0x02,0x7b, ++0x18,0xac,0x03,0x8c,0x1f,0x80,0x34,0x0b,0x80,0x84,0x90,0x9e,0x23,0xe0,0xfb,0x6c, ++0x70,0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0, ++0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x1f,0x20,0xe6, ++0x07,0xec,0x44,0x40,0xf5,0x1f,0x80,0x03,0xaf,0x1f,0x22,0xec,0x25,0xe0,0x24,0x9e, ++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25, ++0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4, ++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4, ++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56, ++0x90,0x9e,0x23,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef, ++0xf0,0xac,0x07,0x8f,0x1f,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5, ++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4, ++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef, ++0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0, ++0xa3,0xef,0xf0,0xaf,0x1f,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83, ++0xe4,0xf0,0xaf,0x05,0xe5,0x1f,0x44,0x80,0xfd,0x51,0xa5,0xe5,0x1f,0x44,0x80,0xff, ++0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0,0xfd, ++0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54,0x0f, ++0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0, ++0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d,0xf0, ++0x22,0xe4,0xf5,0x14,0xe5,0x14,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90, ++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09, ++0xe5,0x14,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x03,0x02,0x6e,0x6a, ++0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3, ++0xe0,0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x03,0x02,0x6e,0x6a,0xe5,0x14,0x94,0x20, ++0x40,0x09,0x90,0x9a,0xc5,0xe0,0x60,0x03,0x02,0x6e,0x76,0xe5,0x14,0x75,0xf0,0x0a, ++0xa4,0x24,0x00,0xf9,0x74,0x90,0x35,0xf0,0x75,0x18,0x01,0xf5,0x19,0x89,0x1a,0xe5, ++0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0, ++0x90,0x9e,0x1b,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82, ++0xe4,0x34,0x98,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x1d,0xcf,0xf0,0xa3,0xef, ++0xf0,0xe5,0x14,0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34, ++0x04,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x80,0x12,0x74,0xa6,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x90,0x9e, ++0x19,0xe0,0xfe,0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12, ++0x43,0x5f,0xe0,0x90,0x9e,0x20,0xf0,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c, ++0xf5,0x83,0xe0,0xc3,0x94,0x05,0x40,0x02,0x41,0x9f,0x90,0x9e,0x20,0xe0,0xff,0x90, ++0x9e,0x1a,0xe0,0x9f,0x40,0x13,0x90,0x9e,0x20,0xe0,0x90,0x9e,0x1a,0xf0,0xee,0x54, ++0x40,0xfe,0x90,0x9e,0x19,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x54,0x05,0x64, ++0x01,0x70,0x29,0x90,0x9e,0x1a,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40, ++0xda,0x80,0x30,0x90,0x9e,0x1a,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x1a,0xe0, ++0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5, ++0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x1a,0xe0, ++0x90,0x41,0x2e,0x93,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1f,0xe0,0x75,0xf0,0x06,0xa4, ++0x24,0x50,0xf9,0x74,0x40,0x35,0xf0,0xfa,0x7b,0xff,0x8b,0x15,0xf5,0x16,0x89,0x17, ++0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x1b, ++0xa3,0xe0,0xf5,0x1c,0x12,0x29,0xd9,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a, ++0x12,0x42,0x97,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35, ++0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x01,0x12,0x42,0x20,0xff, ++0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac, ++0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15, ++0xaa,0x16,0xa9,0x17,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef, ++0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90, ++0x00,0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00, ++0x06,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee, ++0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x04,0x12,0x42,0x20, ++0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd, ++0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab, ++0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e, ++0x1b,0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0xd3,0xe5,0x1c,0x9f,0xe5,0x1b,0x9e, ++0x40,0x0c,0xe5,0x1c,0x9f,0xf5,0x1c,0xe5,0x1b,0x9e,0xf5,0x1b,0x80,0x05,0xe4,0xf5, ++0x1b,0xf5,0x1c,0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83, ++0xe5,0x1b,0xf0,0xa3,0xe5,0x1c,0xf0,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,0x66,0xf5, ++0x82,0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,0x95,0x1b, ++0x50,0x07,0xaf,0x14,0x12,0x65,0x5c,0xa1,0x31,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24, ++0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93, ++0x95,0x1b,0x50,0x02,0xa1,0x31,0x7d,0x01,0xaf,0x14,0x12,0x63,0xbd,0xa1,0x31,0x74, ++0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02, ++0x81,0x3a,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94, ++0x19,0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,0x11, ++0x40,0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x1a,0xe0, ++0xc3,0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x1a,0xe0,0xc3,0x94, ++0x03,0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0, ++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0x74,0x44, ++0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02, ++0x61,0xe7,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0x61,0xe7,0x74,0x85,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff, ++0xe4,0x33,0xfe,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd, ++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4, ++0x33,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f, ++0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x1a,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75, ++0x1e,0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x1e,0x03,0x80,0x03,0x75, ++0x1e,0x01,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74, ++0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x14,0xf5,0x82, ++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82, ++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1a,0xe0,0xff,0x74,0x26,0x25,0x14, ++0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x4c,0x12, ++0x43,0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4, ++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x1e,0xa1,0x2c,0xec,0x64,0x06,0x60,0x02,0xa1, ++0x31,0xf5,0x1b,0xf5,0x1c,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x1b,0xe0, ++0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0x90,0x9e,0x21,0xee,0xf0,0xa3,0xef,0xf0,0x74, ++0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0xe4,0xf5,0x1d, ++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x75,0xf0,0x02,0xe5,0x1d,0xa4,0xf5,0x82,0x85,0xf0, ++0x83,0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x1d,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00, ++0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xc3,0x90,0x9e, ++0x22,0xe0,0x95,0x1c,0x90,0x9e,0x21,0xe0,0x95,0x1b,0x40,0x07,0x05,0x1d,0xe5,0x1d, ++0xb4,0x05,0xbd,0xe5,0x1d,0xc3,0x13,0xf5,0x1d,0xe5,0x1e,0xb4,0x01,0x06,0xe5,0x1d, ++0x70,0x46,0x80,0x13,0xe5,0x1e,0xb4,0x03,0x15,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x03, ++0x80,0x39,0xe5,0x1d,0xb4,0x01,0x05,0x75,0x1e,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x1e, ++0xb4,0x05,0x28,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x05,0x80,0x0d,0xe5,0x1d,0xb4,0x01, ++0x05,0x75,0x1e,0x03,0x80,0x03,0x75,0x1e,0x01,0xd3,0x90,0x9e,0x1e,0xe0,0x94,0x03, ++0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0xd3,0x90,0x9e,0x1e,0xe0, ++0x94,0x03,0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0x74,0x84,0x25, ++0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0xfd,0xaf,0x14,0x12,0x67, ++0x61,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05, ++0x74,0xe6,0x50,0x0e,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0, ++0x80,0x0b,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1d, ++0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14, ++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3, ++0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,0x10,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9a,0xf5,0x83,0x74,0xff,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44, ++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f, ++0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b, ++0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0, ++0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80, ++0x10,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xff,0xf0,0xa3, ++0xf0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x18,0xaa, ++0x19,0xa9,0x1a,0x90,0x00,0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4, ++0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00, ++0x08,0xe4,0xf5,0xf0,0x12,0x43,0x19,0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4, ++0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82, ++0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,0xf5, ++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x14,0xe5,0x14,0xc3,0x94, ++0x40,0x50,0x03,0x02,0x67,0xa4,0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0, ++0xf0,0xa3,0x74,0x0f,0xf0,0xa3,0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34, ++0x04,0xf5,0x83,0xe4,0xf0,0x0d,0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95, ++0x01,0x04,0xf0,0xe4,0xfd,0x75,0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4, ++0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3, ++0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75, ++0xf0,0x0a,0xed,0x90,0x90,0x06,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a, ++0xed,0x90,0x90,0x08,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82, ++0xe4,0x34,0x9d,0xf5,0x83,0x74,0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a, ++0xf5,0x83,0xe4,0xf0,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0, ++0xed,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0, ++0x74,0x86,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5, ++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c, ++0xf5,0x83,0xe4,0xf0,0x90,0x41,0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c, ++0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25, ++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75, ++0xf0,0x09,0xed,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed, ++0x90,0x96,0x4a,0x12,0x43,0x5f,0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34, ++0x95,0xf5,0x83,0x74,0x0c,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f, ++0x74,0xff,0xf0,0xa3,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4, ++0xf0,0xa3,0x74,0x0f,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74, ++0x13,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3, ++0x94,0x20,0x50,0x0f,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13, ++0xf0,0x80,0x0d,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0, ++0x0d,0xed,0x64,0x40,0x60,0x03,0x02,0x6e,0xa5,0x22,0x12,0x29,0xd9,0xf5,0x14,0xc3, ++0x94,0x40,0x50,0x15,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x14,0xf5, ++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xef,0xf0,0x22,0xe5,0x14,0xb4,0x40,0x0a,0x90,0x00, ++0x02,0x12,0x42,0x20,0x90,0x96,0x42,0xf0,0x22,0x90,0x9e,0x30,0x12,0x43,0x8b,0x90, ++0x9e,0x33,0xe0,0x54,0xf0,0x44,0x02,0xf0,0x54,0x0f,0x44,0xc0,0xf0,0x90,0x9e,0x30, ++0x12,0x43,0x6b,0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x33,0x02, ++0x53,0xf1,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x90,0x00,0x01,0x12,0x42,0x20,0xfc, ++0xed,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfd,0xec,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfc, ++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0, ++0xfb,0xea,0x90,0x9e,0x24,0xf0,0xeb,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82, ++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x26,0xf0,0xeb, ++0xa3,0xf0,0xa3,0xed,0xf0,0xa3,0x74,0xff,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82, ++0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2a,0xf0,0xeb, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa, ++0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2c,0xf0,0xeb,0xa3,0xf0,0xa3,0xec,0xf0,0xa3,0x74, ++0xff,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0, ++0xa3,0xf0,0x7b,0x01,0x7a,0x9e,0x79,0x24,0x01,0x79,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0x90,0x9e,0xa4,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x9e, ++0xa4,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e,0xa7, ++0xe0,0x94,0xe8,0x90,0x9e,0xa6,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44, ++0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa6,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81, ++0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x2a,0x8b,0x00,0x00,0x00, ++0x00,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x66,0xf0,0x90,0x00,0x03,0x12,0x42, ++0x20,0x90,0x9e,0x55,0xf0,0x12,0x56,0x22,0x90,0x01,0xe5,0xe5,0x63,0xf0,0x90,0x9e, ++0x66,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42, ++0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x9e,0x5c,0xf0,0x90,0x00,0x01,0x12, ++0x42,0x20,0x90,0x9e,0x5d,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5b,0xf0,0x90, ++0x00,0x03,0x12,0x42,0x20,0x90,0x9e,0x62,0xf0,0x22,0x90,0x9e,0x5c,0x74,0x0a,0xf0, ++0x90,0x9e,0x5d,0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74, ++0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x61, ++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0xef,0xf0, ++0x80,0x0f,0x90,0x9e,0x61,0x74,0x07,0xf0,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0x74,0x03, ++0xf0,0x90,0x9e,0x5f,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x9e,0x24,0x12, ++0x2a,0x8b,0x00,0x00,0x00,0x00,0x12,0x29,0xd9,0x60,0x0d,0x90,0x9e,0x5e,0xf0,0xe4, ++0xfd,0x7f,0x04,0x12,0x54,0xe7,0x80,0x05,0xe4,0x90,0x9e,0x5e,0xf0,0x90,0x9e,0x5e, ++0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf, ++0x05,0xed,0x2e,0x90,0x9e,0x78,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f, ++0x90,0x9e,0x79,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7a, ++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7b,0xf0,0x90,0x00, ++0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,0x2f,0x90,0x9e,0x7c,0xf0,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x43,0x8b,0x90,0x9e,0x24,0x12,0x43, ++0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe, ++0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12, ++0x29,0xd9,0xff,0x60,0x2d,0xb5,0x65,0x16,0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00, ++0x01,0x12,0x42,0xc2,0x65,0x67,0x70,0x04,0xe5,0x66,0x65,0xf0,0x60,0x24,0x90,0x9e, ++0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x12,0x4e,0x37, ++0x80,0x10,0x90,0x9e,0x24,0x12,0x43,0x6b,0x12,0x29,0xd9,0x65,0x65,0x60,0x03,0x12, ++0x44,0xc2,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x24,0x14,0x70,0x1a,0x7b,0x01, ++0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x71,0xb0,0xbf,0x01,0x09,0x90,0x06,0x35, ++0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0x80,0xcd,0xe4,0x90,0x06,0x34,0xf0,0x22, ++0x8e,0x14,0x8f,0x15,0x8b,0x16,0x8a,0x17,0x89,0x18,0xe4,0x90,0x9e,0x19,0xf0,0xef, ++0x90,0x00,0x31,0xf0,0x12,0x4d,0x45,0xe5,0x14,0x54,0x03,0xff,0x90,0x00,0x32,0xe0, ++0x54,0xfc,0x4f,0xf0,0x12,0x4d,0x45,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4d, ++0x45,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50, ++0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90, ++0x00,0x30,0xe0,0xab,0x16,0xaa,0x17,0xa9,0x18,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f, ++0x00,0x22,0xe4,0x90,0x9e,0xac,0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3, ++0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90, ++0x9e,0xad,0xe0,0x94,0xe8,0x90,0x9e,0xac,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22, ++0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x9e,0xac,0xe4,0x75,0xf0,0x01,0x12,0x42, ++0x81,0x80,0xc6,0x90,0x9d,0xff,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0b,0x12, ++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90, ++0x9e,0x80,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95, ++0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0x7f,0x78,0x7e,0x08,0x12,0x27,0xde,0x90, ++0x9d,0xff,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0x03,0x12, ++0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x07,0x12,0x2a,0x7f,0x90, ++0x9e,0x80,0xe0,0x90,0x9d,0xff,0xb4,0x01,0x0d,0x12,0x43,0x53,0xef,0x54,0xc7,0xff, ++0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xec,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43, ++0x53,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c, ++0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0xef,0x44,0x02,0xff,0xec,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x7f,0x70,0x7e,0x0e,0x12, ++0x27,0xde,0x90,0x9e,0x0b,0x12,0x2a,0x7f,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b, ++0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00, ++0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11, ++0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0x7f,0x01,0x12,0x34, ++0x81,0x22,0xef,0x70,0x02,0xe1,0x49,0x90,0x9e,0x0f,0xe0,0x60,0x03,0x02,0x7b,0x15, ++0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08, ++0x12,0x2f,0xd9,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xab,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xaf,0x12,0x43,0x53,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xb3,0x12, ++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc3,0x12,0x43,0x53,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc7,0x12,0x43, ++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d, ++0xcb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd7,0x12,0x43,0x53,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdb,0x12,0x43,0x53, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdf, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xeb,0x12,0x43,0x53,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9d,0xef,0x12,0x43,0x53,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x90,0x9d,0xf3,0x12, ++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x90, ++0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12, ++0x2f,0xd9,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e,0x0f,0xe0,0x64,0x01,0x60, ++0x03,0x02,0x7b,0x15,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xfb,0x12,0x2a, ++0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xa7,0x12,0x2a,0x7f,0x7f,0x5c, ++0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xab,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12, ++0x27,0xde,0x90,0x9d,0xaf,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90, ++0x9d,0xb3,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xb7,0x12, ++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbb,0x12,0x2a,0x7f,0x7f, ++0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbf,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e, ++0x12,0x27,0xde,0x90,0x9d,0xc3,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x27,0xde, ++0x90,0x9d,0xc7,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcb, ++0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcf,0x12,0x2a,0x7f, ++0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd3,0x12,0x2a,0x7f,0x7f,0xd4,0x7e, ++0x0e,0x12,0x27,0xde,0x90,0x9d,0xd7,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x27, ++0xde,0x90,0x9d,0xdb,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d, ++0xdf,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe3,0x12,0x2a, ++0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe7,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x0c,0x12,0x27,0xde,0x90,0x9d,0xeb,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12, ++0x27,0xde,0x90,0x9d,0xef,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90, ++0x9d,0xf3,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xf7,0x12, ++0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90, ++0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f, ++0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08, ++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00,0x7f,0x44,0x7e, ++0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25,0xa4,0x7f,0x5c, ++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f, ++0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4, ++0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25, ++0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b, ++0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04, ++0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b, ++0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a, ++0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12, ++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85, ++0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80, ++0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xe0,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4,0x7f,0xec,0x7e, ++0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a, ++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f, ++0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a, ++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e, ++0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a, ++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12, ++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8,0x12, ++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90,0x9e,0xa8, ++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x54,0x0f,0xfd,0xec,0x54,0xf0, ++0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0x10, ++0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43, ++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x04, ++0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43, ++0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12, ++0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8, ++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x2f,0xd9, ++0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x43,0xf0, ++0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x14,0xc2,0xaf,0x90, ++0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x49,0x05,0x7d,0x40,0x7f,0x01,0x12, ++0x36,0xaf,0xe5,0x14,0x24,0xff,0x92,0xaf,0x22,0x90,0x9e,0x3a,0xe0,0xc3,0x94,0x14, ++0x50,0x05,0xe0,0x04,0xf0,0x81,0x01,0x90,0x9e,0x3a,0xe0,0x64,0x14,0x60,0x02,0x81, ++0x01,0x90,0x9e,0x49,0xe0,0x70,0x25,0x90,0x9e,0x4c,0xe0,0x70,0x1f,0x90,0x9e,0x4a, ++0xe0,0x70,0x19,0x90,0x9e,0x4d,0xe0,0x70,0x13,0x90,0x9e,0x4b,0xe0,0x70,0x0d,0x90, ++0x9e,0x4e,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x9e,0x49,0xe0, ++0x90,0x04,0x44,0xf0,0x90,0x9e,0x4a,0xe0,0x90,0x04,0x45,0xf0,0x90,0x9e,0x4b,0xe0, ++0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x4c,0xe0,0x90,0x04,0x48,0xf0,0x90, ++0x9e,0x4d,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x4e,0xe0,0x90,0x04,0x4a,0xf0,0xa3, ++0xe4,0xf0,0x90,0x9e,0x35,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x36,0xe0,0x90,0x04, ++0x4d,0xf0,0x90,0x9e,0x37,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x38,0xe0,0x90,0x04, ++0x4f,0xf0,0xe4,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3, ++0xf0,0xa3,0xf0,0x90,0x9e,0x49,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3, ++0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x19,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x1a, ++0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x1b,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x1c, ++0xf0,0x90,0x9e,0x52,0xe0,0xff,0x90,0x9e,0x1c,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90, ++0x9e,0x52,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x40,0xe0,0xb4,0x01, ++0x02,0x80,0x03,0x90,0x9e,0x44,0xe0,0xff,0x12,0x4c,0xf0,0x22,0x90,0x9e,0x53,0xe0, ++0x64,0x01,0x60,0x08,0x90,0x9e,0x41,0xe0,0x60,0x02,0xa1,0x23,0x90,0x9e,0x35,0xe0, ++0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x36,0xe0,0xc3,0x94, ++0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x37,0xe0,0xc3,0x94,0xff, ++0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x36,0xf0,0x80,0x15,0x90,0x9e,0x38,0xe0, ++0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x37,0xf0,0x90,0x9e,0x36, ++0xf0,0x90,0x9e,0x35,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2, ++0x32,0x90,0x9e,0x49,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90, ++0x9e,0x4a,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e, ++0x4b,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4a,0xf0,0x90, ++0x9e,0x49,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x4c,0xe0,0xc3,0x94, ++0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x4d,0xe0,0xc3,0x94,0xff,0x50, ++0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x4e,0xe0,0xc3,0x94,0xff,0x50,0x0c, ++0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x04,0xfd,0xe0, ++0x44,0x01,0xf0,0x22,0x68,0x4c,}; ++#else ++// =================== v88 TSMC P2PPS with CCX report C2H 2012-12-05 ======================= ++u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength] = { ++0xC1, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x12, 0xDE, 0x3E, 0x00, 0x00, ++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x60, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x68, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00, ++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02, ++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09, ++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08, ++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18, ++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21, ++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20, ++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10, ++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20, ++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, ++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05, ++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E, ++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E, ++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A, ++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04, ++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, ++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40, ++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8, ++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C, ++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28, ++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64, ++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02, ++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E, ++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, ++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06, ++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50, ++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22, ++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06, ++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8, ++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22, ++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2, ++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70, ++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5, ++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3, ++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01, ++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, ++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22, ++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A, ++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, ++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB, ++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29, ++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09, ++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8, ++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC, ++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4, ++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA, ++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82, ++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0, ++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93, ++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, ++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, ++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, ++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60, ++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03, ++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60, ++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B, ++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A, ++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, ++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5, ++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5, ++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75, ++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54, ++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C, ++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x7D, 0xC1, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5, ++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18, ++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90, ++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B, ++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74, ++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90, ++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22, ++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC, ++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F, ++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01, ++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC, ++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74, ++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74, ++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53, ++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74, ++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D, ++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01, ++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54, ++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22, ++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20, ++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20, ++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22, ++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60, ++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2, ++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, ++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22, ++0x02, 0x46, 0x6E, 0x02, 0x50, 0xC6, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6, ++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C, ++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01, ++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B, ++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F, ++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8, ++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, ++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE, ++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64, ++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90, ++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0, ++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58, ++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25, ++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E, ++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x36, 0x75, 0x7D, 0x02, 0x7F, ++0x03, 0x12, 0x36, 0x75, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12, ++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x7D, 0xC1, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B, ++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x36, 0xE6, 0x7D, 0x02, 0x7F, 0x03, 0x12, ++0x36, 0xE6, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0, ++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90, ++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09, ++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15, ++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08, ++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43, ++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, ++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90, ++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B, ++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xF5, 0x24, 0x14, 0x60, ++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90, ++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A, ++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, ++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, ++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22, ++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4, ++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0, ++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF, ++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, ++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12, ++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0, ++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xBF, 0x01, ++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x12, 0x45, 0x09, 0x90, 0x05, ++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, ++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24, ++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E, ++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, ++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50, ++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, ++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, ++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, ++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F, ++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, ++0x7D, 0xC1, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70, ++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5, ++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12, ++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F, ++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18, ++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04, ++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08, ++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90, ++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B, ++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, ++0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x36, ++0xE6, 0x12, 0x7C, 0x50, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21, ++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8, ++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xFD, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20, ++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05, ++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0, ++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01, ++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0, ++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x7E, 0x06, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43, ++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41, ++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02, ++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90, ++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F, ++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01, ++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12, ++0x35, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, ++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, ++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3, ++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31, ++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34, ++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F, ++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B, ++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, ++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11, ++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0, ++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, ++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, ++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24, ++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, ++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09, ++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x51, 0xC9, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01, ++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90, ++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01, ++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90, ++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05, ++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90, ++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, ++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B, ++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E, ++0x12, 0x65, 0x5F, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02, ++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F, ++0x01, 0x12, 0x65, 0x82, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x7D, 0xC1, 0xE5, 0x36, ++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19, ++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, ++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A, ++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7E, 0x2B, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, ++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4, ++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, ++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, ++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, ++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, ++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54, ++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F, ++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60, ++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C, ++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F, ++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0, ++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02, ++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D, ++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x65, 0x82, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60, ++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC2, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02, ++0x04, 0xF1, 0xAF, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC6, 0xE1, 0x55, ++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xB1, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0, ++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xCA, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA1, 0x80, 0x65, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD5, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1, ++0x8E, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7C, 0x41, 0x80, 0x46, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x72, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, ++0x05, 0x12, 0x7D, 0x23, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x70, 0x80, 0x25, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04, ++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05, ++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, ++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8E, 0x80, 0xEF, 0x12, 0x7D, 0x42, 0x80, 0xEA, ++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, ++0xC8, 0x74, 0xFD, 0xF0, 0x12, 0x7C, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01, ++0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0, ++0x22, 0x12, 0x7D, 0x42, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, ++0xA1, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33, ++0xF0, 0x22, 0xF1, 0xCA, 0x80, 0xEB, 0xF1, 0xD5, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, ++0x8B, 0x33, 0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, ++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, ++0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF, 0x8E, 0xF0, 0x12, ++0x43, 0xBA, 0x50, 0x1A, 0x00, 0x40, 0x50, 0x42, 0x00, 0x80, 0x50, 0x6D, 0x01, 0x00, 0x50, 0x81, ++0x02, 0x00, 0x50, 0x99, 0x04, 0x00, 0x00, 0x00, 0x50, 0xB6, 0xED, 0x54, 0x3F, 0x70, 0x04, 0xFE, ++0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x06, ++0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, ++0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x80, 0xEF, ++0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, ++0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49, 0xED, 0x70, 0x04, ++0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D, 0x00, 0xFC, 0x80, ++0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02, 0x7F, 0x00, 0xEF, ++0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D, 0x70, 0x04, 0xFE, ++0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13, 0x54, 0x3F, 0x7D, ++0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01, 0xE4, 0x74, 0x58, ++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0, 0x75, 0x8E, 0x02, ++0x91, 0x0E, 0x12, 0x68, 0x44, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x68, 0x51, 0x90, 0x8B, 0x09, ++0xEF, 0xF0, 0x12, 0x68, 0x5D, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0xF5, 0x55, ++0xF5, 0x21, 0x12, 0x72, 0x55, 0x12, 0x44, 0x9E, 0x12, 0x32, 0x3D, 0x7F, 0x03, 0x12, 0x78, 0x42, ++0x12, 0x7C, 0x3D, 0x12, 0x68, 0x0A, 0x12, 0x68, 0x75, 0x12, 0x68, 0x8A, 0x12, 0x68, 0x28, 0x12, ++0x68, 0x43, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0x5F, 0xC2, 0xAF, 0x90, 0x00, 0x80, 0xE0, ++0x44, 0x40, 0xF0, 0x51, 0x0E, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF, 0x11, 0xBB, 0x90, ++0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0xC6, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x50, 0xA3, 0xF0, ++0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1, 0x59, 0xE5, 0x55, ++0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x6B, 0xBD, 0x80, 0xD0, 0x90, ++0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0, 0xA3, 0xF0, 0xA3, ++0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x55, 0x31, 0x88, 0x7D, 0xFF, ++0x7F, 0x56, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, ++0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x0E, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x01, 0x30, ++0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0x88, 0xE4, 0xFD, 0x7F, ++0x52, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01, 0x70, 0x3B, 0x71, ++0x4E, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0x42, 0x90, 0x00, 0x46, 0xE0, 0x44, 0x04, 0xFD, 0x7F, ++0x46, 0x31, 0x88, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31, 0x88, 0x90, 0x00, ++0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0x88, 0x7F, 0x02, 0x71, 0x6A, 0x8F, 0x62, 0x90, ++0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x51, 0xE2, 0x22, 0xE0, 0x5F, 0xF0, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0xD3, ++0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, ++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x5F, 0xF0, ++0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, ++0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, ++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, ++0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D, 0x90, 0x8A, 0xDF, ++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, ++0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, ++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, 0xFF, 0x90, 0x00, ++0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, ++0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x0B, 0xD0, 0xD0, 0x92, ++0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F, 0xF0, 0x44, 0xF0, ++0xFD, 0x7F, 0x49, 0x31, 0x88, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F, 0x49, 0x21, 0x88, ++0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F, 0xF5, 0x60, 0xE4, ++0xFD, 0x7F, 0x0B, 0x51, 0x1E, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x1E, 0x71, 0x4E, 0xE4, 0xFF, 0x71, ++0x42, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFC, 0xA3, ++0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60, 0x7E, 0x01, 0x02, ++0x35, 0xAB, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x51, 0xE2, 0x22, 0x7F, 0x0B, ++0x71, 0x6A, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4, 0xF5, 0x61, 0x80, ++0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF, 0x74, 0x01, 0xA8, ++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, 0x51, 0x0B, 0x90, ++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, ++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, ++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80, 0x4B, 0x90, 0x8B, ++0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, ++0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x0E, 0x90, 0x8B, 0x57, 0xE0, ++0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06, ++0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0x90, ++0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21, 0x88, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDA, 0x12, 0x43, ++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF, 0xE4, 0x3A, 0xFE, ++0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12, 0x43, 0x19, 0x12, ++0x29, 0xD9, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, ++0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60, 0x22, 0x90, 0x8A, ++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0, 0x71, 0x00, 0x80, ++0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0x65, 0x5E, 0x60, 0x02, 0x91, 0x95, ++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F, 0x82, 0x8E, 0x83, ++0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF, 0x12, 0x43, 0x94, ++0x54, 0xE7, 0x01, 0x54, 0xDE, 0x02, 0x55, 0x0B, 0x03, 0x55, 0x14, 0x05, 0x55, 0x1D, 0x06, 0x55, ++0x58, 0x07, 0x55, 0x25, 0x08, 0x55, 0x2E, 0x09, 0x55, 0x36, 0x20, 0x55, 0x3F, 0x2C, 0x54, 0xF0, ++0x2D, 0x54, 0xF9, 0x2E, 0x55, 0x02, 0x3B, 0x55, 0x48, 0x4B, 0x00, 0x00, 0x55, 0x51, 0x90, 0x8A, ++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x85, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x8B, ++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0xB8, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, ++0x75, 0x00, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x39, 0x90, 0x8A, 0xD7, 0x12, 0x43, ++0x6B, 0x02, 0x75, 0x52, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x0F, 0x90, 0x8A, 0xD7, ++0x12, 0x43, 0x6B, 0xC1, 0xA6, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x9A, 0x90, 0x8A, ++0xD7, 0x12, 0x43, 0x6B, 0x81, 0x1E, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0x81, 0x90, ++0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7A, 0xC2, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7C, ++0x2B, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x70, ++0x02, 0xC1, 0xA1, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02, 0xC1, 0x9A, 0x90, ++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD0, ++0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01, 0x7B, 0x01, 0x7A, ++0x8A, 0x79, 0xD1, 0x12, 0x5E, 0xE4, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x13, 0x54, ++0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x88, 0x12, 0x43, ++0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x89, ++0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, ++0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, ++0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90, 0x8B, 0x51, 0xE0, ++0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6, 0xF0, 0x80, 0x33, ++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, ++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, ++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, ++0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2, 0x91, 0xA6, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06, 0x08, 0x80, 0x02, ++0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, ++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC, 0xF0, 0x90, 0x8B, ++0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0x6A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x02, ++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0x54, 0x1F, 0xFE, ++0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA, 0xEF, 0xF0, 0xA3, ++0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x03, 0x12, ++0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, ++0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, ++0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC, 0x83, 0x90, 0x8A, ++0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, ++0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, ++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0xEF, 0x12, ++0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x90, ++0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90, 0x8A, 0xDC, 0x12, ++0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0xA3, 0xE0, ++0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x29, 0xD9, 0x8D, 0x82, 0x8C, 0x83, 0xA3, 0xF0, ++0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, ++0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, ++0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, ++0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, ++0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24, 0x81, 0xF9, 0x74, ++0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90, ++0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5, 0x0F, 0x75, 0xF0, ++0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5, 0x18, 0x89, 0x19, ++0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12, 0x43, 0x94, 0x58, ++0x34, 0x00, 0x58, 0x49, 0x01, 0x58, 0x5E, 0x02, 0x58, 0x73, 0x03, 0x58, 0x9C, 0x04, 0x58, 0xB1, ++0x05, 0x58, 0xC6, 0x06, 0x58, 0xEC, 0x0C, 0x59, 0x19, 0x0D, 0x59, 0x46, 0x0E, 0x59, 0x73, 0x0F, ++0x00, 0x00, 0x59, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80, 0x27, 0xE5, 0x0F, ++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, ++0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x21, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF5, 0x80, ++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, ++0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, ++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x21, 0xA7, 0x90, 0x04, 0x47, 0xE0, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0, 0x85, 0x11, 0x82, ++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x21, 0x9E, 0x90, 0x04, 0x4B, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, ++0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, ++0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, ++0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, ++0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, ++0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x50, 0xE0, 0x85, ++0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xC0, 0x03, 0xC0, ++0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x12, 0x29, 0xD9, ++0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5, 0x14, 0x24, 0x01, ++0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB, ++0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0, 0x01, 0xD0, 0x02, ++0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83, 0xC0, 0x82, 0xE0, ++0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, ++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82, ++0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, 0xE5, 0x0F, 0x25, ++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, ++0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x50, ++0x02, 0x41, 0xEC, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, ++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, ++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, ++0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x47, ++0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x40, 0x3C, ++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, ++0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x5E, ++0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0, 0x80, 0x0D, 0x90, ++0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, ++0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x40, 0x02, 0x61, ++0xA5, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, ++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80, 0x63, 0x90, 0x8A, ++0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, ++0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, ++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, ++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, ++0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, ++0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90, ++0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xE5, ++0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94, 0x20, 0x50, 0x32, ++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3, 0x9F, 0x40, 0x02, ++0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, ++0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7, 0xE0, 0x90, 0x8A, ++0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0x4E, 0x90, 0x8A, 0xE9, 0xE0, 0xFF, ++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xE7, ++0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0, 0x22, 0xEF, 0xD3, ++0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3, 0x94, 0x03, 0x40, ++0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xED, ++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A, 0xC7, 0xF0, 0x74, ++0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, ++0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90, 0x8A, 0xC5, 0xE0, ++0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF, 0xD3, 0x9E, 0x40, ++0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x04, 0x80, ++0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, ++0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, ++0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90, 0x8A, 0xC9, 0xF0, ++0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, ++0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, ++0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, ++0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, 0xC9, 0xE0, 0xFF, ++0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, ++0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75, 0xF0, 0x09, 0xEC, ++0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0, 0x09, 0xEC, 0x90, ++0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0xE4, ++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE5, 0xCB, 0xF0, ++0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, ++0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3, 0x9E, 0x40, 0x0C, ++0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED, 0x70, 0x02, 0xC1, ++0x93, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E, 0x90, 0x8A, 0xE1, ++0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x70, ++0x02, 0xC1, 0x93, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02, 0xC1, 0x93, 0xE4, ++0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3, 0xE0, 0xFD, 0x90, ++0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21, 0xEF, 0x24, 0xF0, ++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, ++0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0, 0x5E, 0xFE, 0xA3, ++0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F, 0x60, 0x08, 0x90, ++0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, ++0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A, 0xE3, 0xE0, 0x90, ++0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, ++0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, ++0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A, 0x8A, 0x1B, 0x89, ++0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F, 0x90, 0x8B, 0x42, ++0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42, 0xE4, 0x75, 0xF0, ++0x01, 0x12, 0x43, 0x74, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75, 0xF0, 0x01, 0x12, ++0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9, 0x1C, 0xD0, 0xD0, ++0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B, ++0x90, 0x8B, 0x53, 0xE0, 0xFF, 0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF, ++0x7E, 0x01, 0x12, 0x74, 0x3B, 0xEF, 0x60, 0x47, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D, ++0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20, 0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0xD1, 0xE4, 0x90, ++0x8B, 0x48, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43, ++0x6B, 0x12, 0x29, 0xD9, 0xFF, 0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2, ++0xD1, 0xE4, 0x90, 0x01, 0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0, ++0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44, ++0x80, 0xF0, 0x7B, 0x00, 0x7A, 0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A, ++0x8A, 0x79, 0xC5, 0xE1, 0x33, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4, 0x74, ++0xC5, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22, 0xE0, ++0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0, 0x30, ++0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, ++0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3, 0x13, ++0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74, 0x0F, ++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, ++0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, ++0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F, 0xC5, ++0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x90, 0x04, 0x1F, ++0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13, 0x13, ++0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5, 0x74, ++0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07, 0xAF, ++0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D, 0xF0, ++0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x59, ++0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04, 0xF0, ++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02, 0x11, ++0x6D, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, ++0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, ++0x01, 0xC4, 0x74, 0xF2, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28, 0xF5, ++0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0, 0x55, ++0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x89, 0x90, 0x01, 0x34, 0x74, 0x01, 0xF0, ++0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51, 0x85, ++0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF, 0xE5, ++0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x46, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x46, 0xE5, ++0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F, 0xFF, ++0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, ++0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, ++0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94, 0x04, ++0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, 0x5F, ++0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53, 0x54, ++0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, ++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5, 0x54, ++0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, ++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7, 0x36, ++0xAF, 0x08, 0x12, 0x5C, 0xC3, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, ++0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, ++0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D, 0xAB, ++0x09, 0xAF, 0x08, 0x12, 0x5C, 0x66, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A, 0x90, ++0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, ++0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90, 0x01, ++0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80, 0x09, ++0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x21, 0x90, 0x01, ++0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4, 0x59, ++0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0x12, 0x5F, 0xA4, 0xE5, ++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90, ++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF, ++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8, ++0x00, 0x75, 0xE8, 0x00, 0x12, 0x51, 0x9D, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52, ++0x0E, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B, ++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4, ++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, ++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE6, 0x90, 0x8B, 0x08, 0x74, ++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, ++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, ++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, ++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E, ++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x55, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4E, ++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3E, ++0xB1, 0x5F, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, ++0x2D, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, ++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x02, 0x04, 0x7F, 0x01, 0xB1, 0x82, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x43, ++0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74, 0x02, ++0xF0, 0x43, 0x55, 0x40, 0x11, 0x84, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05, 0x22, ++0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF, 0x12, ++0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16, 0x90, ++0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08, 0xF0, ++0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, ++0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, ++0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, ++0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21, 0xB4, ++0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, ++0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03, 0x12, ++0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21, 0xB4, ++0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, ++0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74, 0x40, ++0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25, 0x54, ++0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x28, 0x90, 0x01, 0x37, 0x74, 0x02, ++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x18, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x08, ++0x12, 0x48, 0xFE, 0x12, 0x7D, 0xC1, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03, ++0x12, 0x48, 0xFE, 0x74, 0xF2, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07, ++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, ++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05, ++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, ++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0A, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x04, 0x7F, 0x06, 0xB1, 0x82, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x03, 0x12, 0x78, ++0x35, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70, ++0x02, 0xE1, 0x4E, 0xEF, 0x12, 0x43, 0x94, 0x65, 0xB0, 0x00, 0x65, 0xEA, 0x01, 0x66, 0x30, 0x02, ++0x66, 0x6A, 0x03, 0x66, 0xA2, 0x04, 0x66, 0xDB, 0x05, 0x67, 0x16, 0x06, 0x00, 0x00, 0x67, 0x4E, ++0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4, ++0x05, 0x04, 0xF1, 0x5D, 0xE1, 0x4E, 0xEF, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x16, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xA4, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, ++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, ++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, ++0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0xE1, 0x4E, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, ++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60, 0x02, 0xE1, 0x4E, 0xF1, 0x67, 0xE1, 0x4E, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, ++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x08, 0xEE, 0xB4, ++0x03, 0x04, 0x7F, 0x01, 0xF1, 0x53, 0xF1, 0xD0, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, ++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, ++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, ++0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x06, 0xEE, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xB9, ++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, ++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, ++0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x09, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0xF1, 0xAF, 0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, ++0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, ++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, ++0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x0B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01, ++0xF1, 0x81, 0xF1, 0xC3, 0x80, 0x38, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, ++0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, ++0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xF1, ++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xDD, 0xD0, 0xD0, ++0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22, ++0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04, ++0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, ++0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90, ++0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D, ++0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, ++0x7C, 0x4A, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74, ++0x03, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22, ++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, ++0x74, 0x6F, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3, 0x13, 0x90, 0xFD, 0x10, ++0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29, ++0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90, 0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3, ++0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B, 0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31, ++0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01, 0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5, ++0x32, 0xF0, 0x22, 0x22, 0x90, 0x00, 0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00, ++0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F, 0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09, ++0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00, 0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22, ++0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74, ++0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0, ++0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06, ++0xC0, 0x07, 0x7D, 0x91, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0x74, 0x68, 0xFF, 0xA3, 0xF0, 0x53, 0x91, ++0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE, 0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52, ++0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0, 0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00, ++0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D, 0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5, ++0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00, 0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90, ++0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5, 0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0, ++0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90, 0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06, ++0x90, 0x00, 0x56, 0x74, 0x04, 0xF0, 0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08, ++0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, ++0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30, ++0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0, 0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, ++0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D, 0xF0, 0x22, 0xAD, 0x07, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1, ++0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, ++0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, ++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB, ++0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, ++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, ++0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0xB9, ++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, ++0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, ++0xFE, 0xD3, 0x9F, 0x40, 0x02, 0x41, 0xF3, 0xEE, 0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0, ++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, ++0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3, ++0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0, 0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0, ++0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13, ++0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A, 0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0, ++0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80, ++0x42, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x41, 0x17, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A, ++0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, ++0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10, ++0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF, 0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03, ++0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, ++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66, 0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90, ++0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, ++0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24, ++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, ++0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, ++0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, ++0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44, ++0x80, 0xFD, 0x12, 0x5C, 0x4E, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A, ++0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x03, 0x02, 0x72, 0x54, 0x75, ++0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x72, ++0x4B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, ++0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x03, 0x02, 0x72, 0x4B, 0xEF, ++0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, ++0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, ++0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x25, 0xE0, ++0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD6, ++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, ++0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F, 0xA3, 0xF0, ++0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9, 0xF0, 0x90, ++0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xC3, 0x94, ++0x05, 0x40, 0x02, 0xC1, 0x9C, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0, 0x9E, 0x40, ++0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90, 0x8A, 0xD0, ++0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE, 0x74, 0x23, ++0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF, 0x90, 0x40, ++0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8, 0xF0, 0x90, ++0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0, 0x75, 0x0F, ++0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF, 0xD3, 0x90, ++0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0D, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xE1, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, ++0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2, 0xCF, ++0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x29, 0xD9, 0xFF, 0x7E, 0x00, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, ++0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, ++0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, ++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, ++0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x7E, ++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, ++0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, ++0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, ++0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, ++0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04, 0x12, ++0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12, 0x42, ++0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, ++0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0x90, ++0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, ++0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, ++0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC, 0xA3, ++0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, ++0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED, 0x9B, ++0xEC, 0x9A, 0x40, 0x05, 0x31, 0x78, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, ++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3, ++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x03, 0x02, 0x71, 0xAF, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x03, ++0x02, 0x70, 0x7D, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, ++0x94, 0x19, 0x40, 0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, ++0x11, 0x40, 0x2E, 0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1, ++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, ++0x94, 0x03, 0x40, 0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, ++0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, ++0xC3, 0x94, 0x30, 0x50, 0x0B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x02, 0x70, 0x28, ++0x90, 0x89, 0x43, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x70, 0x1D, 0x90, 0x8A, 0xCF, 0xE0, 0x24, ++0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF, ++0xE0, 0xFF, 0xEE, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38, ++0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, ++0x50, 0x16, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, ++0xFF, 0x90, 0x8A, 0xD1, 0xE0, 0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82, ++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74, ++0x05, 0xF0, 0x80, 0x11, 0xEF, 0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0, ++0x80, 0x03, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A, ++0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44, ++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A, ++0xDD, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4, ++0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82, ++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43, ++0x5F, 0xE0, 0xB4, 0x01, 0x11, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, ++0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x21, 0xAC, 0xEC, 0x64, 0x06, ++0x60, 0x02, 0x21, 0xAF, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E, ++0x00, 0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xDB, 0xEE, ++0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE0, 0x90, 0x8A, 0xDD, 0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, ++0xD3, 0x94, 0x04, 0x50, 0x47, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4, ++0xF5, 0x82, 0x85, 0xF0, 0x83, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93, ++0xFF, 0x7E, 0x00, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90, ++0x8A, 0xDB, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, ++0xE0, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0, ++0xC3, 0x13, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70, ++0x5D, 0x90, 0x8A, 0xDD, 0x04, 0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0, ++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90, ++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70, ++0x32, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F, ++0xEF, 0x90, 0x8A, 0xDD, 0xB4, 0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3, ++0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, ++0x8A, 0xDD, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, ++0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x12, 0x69, 0x38, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94, ++0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0, ++0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4, ++0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, ++0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0, ++0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, ++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, ++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, ++0xF0, 0x02, 0x6B, 0xC2, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, ++0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4, 0xF0, ++0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, ++0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x81, 0x0E, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x00, ++0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12, 0x43, ++0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F, 0xE4, ++0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, ++0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x74, ++0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88, ++0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, ++0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01, 0x93, ++0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE, 0xEF, ++0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, ++0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, ++0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0C, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, ++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F, 0xF0, ++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0, 0x09, ++0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34, ++0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x41, 0x7D, 0x22, 0x12, ++0x29, 0xD9, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE, 0x74, ++0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20, 0x0A, ++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0, ++0xA3, 0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5, ++0x82, 0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D, ++0xE0, 0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90, ++0x8B, 0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, ++0x80, 0xC6, 0x7F, 0x01, 0x22, 0x12, 0x29, 0xD9, 0xF5, 0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, ++0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12, ++0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0, ++0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30, ++0xE0, 0x25, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x10, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, ++0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12, ++0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B, 0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11, ++0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22, ++0x12, 0x29, 0xD9, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00, ++0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90, ++0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, ++0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x12, 0xF0, ++0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7, ++0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x29, 0xD9, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90, ++0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0, ++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03, ++0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, ++0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x12, 0x29, 0xD9, 0xC3, ++0x13, 0x20, 0xE0, 0x02, 0xC1, 0xED, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, ++0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, ++0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, ++0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, ++0x12, 0x29, 0xD9, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54, 0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, ++0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0xD9, 0x90, 0x8A, ++0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x13, 0x13, ++0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF, ++0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E, ++0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, 0x12, 0x36, 0xE6, 0x80, 0x0B, 0xE4, 0x90, ++0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, ++0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54, ++0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, ++0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32, ++0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0, ++0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01, ++0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F, ++0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, ++0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, ++0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDA, ++0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFD, ++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9, ++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x10, ++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x40, 0xFD, 0xEF, 0x54, ++0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE, 0xEF, 0x54, 0xFB, 0x4E, 0xF0, ++0x20, 0xE0, 0x02, 0xE1, 0xE2, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x13, ++0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36, ++0x75, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, ++0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, ++0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C, 0x90, 0x01, 0x3E, 0x74, 0x03, ++0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0D, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x2C, 0x7F, 0x06, 0x12, 0x65, 0x82, 0x80, 0x25, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x1B, ++0x7F, 0x01, 0x12, 0x65, 0x82, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x09, 0x7D, 0x01, 0xAF, ++0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03, 0x12, 0x7D, 0xC1, 0x7F, 0x01, ++0x80, 0x4C, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0x7D, 0x03, 0x7F, 0x02, ++0x12, 0x36, 0x92, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80, 0x1B, 0x90, 0x8B, 0x2D, 0xE0, ++0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, ++0x02, 0x05, 0x7F, 0x01, 0x12, 0x65, 0x82, 0x11, 0x35, 0x12, 0x4A, 0xFC, 0x7F, 0x03, 0x11, 0x42, ++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48, ++0xFE, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32, ++0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04, 0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54, ++0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x38, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, ++0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, ++0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, ++0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12, 0x43, 0x94, 0x78, 0xF8, 0x00, 0x7A, 0x6B, 0x01, 0x79, ++0x01, 0x02, 0x79, 0x01, 0x03, 0x79, 0x01, 0x04, 0x7A, 0x6B, 0x05, 0x7A, 0x35, 0x80, 0x7A, 0x4E, ++0x81, 0x7A, 0x6B, 0x82, 0x00, 0x00, 0x7A, 0x67, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x51, 0x72, 0x41, ++0x6B, 0x90, 0x8A, 0xE8, 0xE0, 0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80, ++0x0F, 0xEF, 0x90, 0x8A, 0xE5, 0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0, ++0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x08, 0x50, 0x78, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, ++0xE5, 0xE0, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE9, ++0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE, ++0x2F, 0xFF, 0xEE, 0xFD, 0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, ++0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0x88, 0x80, 0x2B, 0xFF, 0xFD, ++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A, ++0x3C, 0xF5, 0x83, 0xE0, 0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9, ++0xE0, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80, ++0x8D, 0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE8, 0xE0, ++0x64, 0x04, 0x60, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, ++0x10, 0x12, 0x2A, 0x6C, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0, ++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x18, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, ++0xD0, 0x00, 0x12, 0x43, 0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED, ++0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, ++0x01, 0xD0, 0x00, 0x12, 0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0, ++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xEF, 0x12, ++0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, ++0x12, 0x2F, 0xD9, 0x80, 0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, ++0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x37, 0x54, 0x80, 0x1D, 0x90, 0x8A, ++0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, ++0xEF, 0xF0, 0x12, 0x36, 0xCB, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, ++0xAF, 0x22, 0x8F, 0x0F, 0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3, ++0xE0, 0xFF, 0xC3, 0x9E, 0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0, ++0x04, 0xF0, 0x80, 0xE5, 0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, ++0xE5, 0x0F, 0xF0, 0x90, 0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD, ++0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02, ++0x34, 0xB7, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74, ++0x04, 0xF0, 0xA3, 0xE4, 0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90, ++0x8A, 0xE1, 0xF0, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0, ++0x30, 0xE0, 0x0B, 0x90, 0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90, ++0x8A, 0xDB, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, ++0x8A, 0xDD, 0xE0, 0x24, 0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D, ++0xFF, 0x24, 0x01, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74, ++0x02, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0, ++0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3, ++0xE0, 0x2F, 0xFF, 0x90, 0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC, ++0xF5, 0x83, 0xE0, 0xFF, 0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, ++0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x11, 0x89, 0xEF, 0x70, 0x45, 0x90, ++0x01, 0xC3, 0xE0, 0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0, ++0x94, 0x03, 0x40, 0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2, ++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80, 0xCF, ++0x90, 0x01, 0xC6, 0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74, ++0xFF, 0xF0, 0x80, 0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB, ++0x70, 0x05, 0xF0, 0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0, ++0x90, 0x8A, 0xDE, 0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02, ++0xA3, 0xE0, 0x60, 0x02, 0x61, 0x16, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, ++0x05, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61, ++0x22, 0x91, 0x4A, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, ++0x7F, 0x78, 0x7E, 0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x1C, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, ++0x0C, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x20, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x27, ++0xDE, 0x90, 0x8B, 0x24, 0x12, 0x2A, 0x7F, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01, ++0x0D, 0x12, 0x43, 0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43, ++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, ++0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80, ++0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, ++0x53, 0xEF, 0x44, 0x02, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, ++0x12, 0x2F, 0xD9, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x28, 0x12, 0x2A, 0x7F, ++0x90, 0x80, 0x85, 0x12, 0x2A, 0x8B, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, ++0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x34, ++0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, ++0x00, 0x00, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81, 0x90, 0x00, 0x11, 0xE0, 0x54, 0xF6, 0xF0, ++0x02, 0x52, 0x0E, 0x91, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, ++0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0xB1, 0x42, 0x90, 0x8B, 0x33, 0x74, 0x04, ++0xF0, 0x22, 0x90, 0x00, 0x11, 0xE0, 0x44, 0x09, 0xF0, 0x12, 0x52, 0x0E, 0x90, 0x8B, 0x1C, 0x12, ++0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90, ++0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, ++0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00, ++0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, ++0x7F, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03, ++0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, ++0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81, ++0x22, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E, ++0x14, 0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, ++0x90, 0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0, ++0x22, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01, ++0xC6, 0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18, ++0x90, 0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01, ++0x12, 0x45, 0xA2, 0xB1, 0xC1, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x01, 0x57, 0xE0, 0x60, ++0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE0, ++0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0, 0x04, 0xF0, 0x53, ++0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0x40, 0x0E, 0xE5, ++0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0, 0x90, 0x01, 0x5B, ++0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0xE4, 0x90, ++0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, ++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B, 0x4F, 0xF0, 0xA3, ++0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xA3, ++0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4F, ++0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x90, ++0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x00, 0x92, 0x00}; ++ ++// =================== v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05 ===================== ++u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength] = { ++0xC1, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x11, 0xDE, 0x3E, 0x01, 0x00, ++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x60, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x68, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00, ++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02, ++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09, ++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08, ++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18, ++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21, ++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20, ++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10, ++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20, ++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, ++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05, ++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E, ++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E, ++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A, ++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04, ++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, ++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40, ++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8, ++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C, ++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28, ++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64, ++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02, ++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E, ++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, ++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06, ++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50, ++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22, ++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06, ++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8, ++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22, ++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2, ++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70, ++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5, ++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3, ++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01, ++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, ++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22, ++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A, ++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, ++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB, ++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29, ++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09, ++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8, ++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC, ++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4, ++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA, ++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82, ++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0, ++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93, ++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, ++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, ++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, ++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60, ++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03, ++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60, ++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B, ++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A, ++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, ++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5, ++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5, ++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75, ++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54, ++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C, ++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x7D, 0xC1, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5, ++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18, ++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90, ++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B, ++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74, ++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90, ++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22, ++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC, ++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F, ++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01, ++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC, ++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74, ++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74, ++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53, ++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74, ++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D, ++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01, ++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54, ++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22, ++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20, ++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20, ++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22, ++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60, ++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2, ++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, ++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22, ++0x02, 0x46, 0x6E, 0x02, 0x50, 0xC6, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6, ++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C, ++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01, ++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B, ++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F, ++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8, ++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, ++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE, ++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64, ++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90, ++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0, ++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58, ++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25, ++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E, ++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x31, 0x2C, 0x7D, 0x02, 0x7F, ++0x03, 0x12, 0x31, 0x2C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12, ++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x7D, 0xC1, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B, ++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x31, 0x9D, 0x7D, 0x02, 0x7F, 0x03, 0x12, ++0x31, 0x9D, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0, ++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90, ++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09, ++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15, ++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08, ++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43, ++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, ++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90, ++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B, ++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xF5, 0x24, 0x14, 0x60, ++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90, ++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A, ++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, ++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, ++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22, ++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4, ++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0, ++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF, ++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, ++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12, ++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0, ++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xBF, 0x01, ++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x12, 0x45, 0x09, 0x90, 0x05, ++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, ++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24, ++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E, ++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, ++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50, ++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, ++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, ++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, ++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F, ++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, ++0x7D, 0xC1, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70, ++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5, ++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12, ++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F, ++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18, ++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04, ++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08, ++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90, ++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B, ++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, ++0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x31, ++0x9D, 0x12, 0x7C, 0x50, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21, ++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8, ++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xFD, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20, ++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05, ++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0, ++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01, ++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0, ++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x7E, 0x06, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43, ++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41, ++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02, ++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90, ++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F, ++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01, ++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12, ++0x30, 0x62, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, ++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, ++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3, ++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31, ++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34, ++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F, ++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B, ++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, ++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11, ++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0, ++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, ++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, ++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24, ++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, ++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09, ++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x51, 0xC9, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01, ++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90, ++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01, ++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90, ++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05, ++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90, ++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, ++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B, ++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E, ++0x12, 0x65, 0x5F, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02, ++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F, ++0x01, 0x12, 0x65, 0x82, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x7D, 0xC1, 0xE5, 0x36, ++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19, ++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, ++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A, ++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7E, 0x2B, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, ++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4, ++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, ++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, ++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, ++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, ++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54, ++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F, ++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60, ++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C, ++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F, ++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0, ++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02, ++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D, ++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x65, 0x82, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60, ++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC2, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02, ++0x04, 0xF1, 0xAF, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC6, 0xE1, 0x55, ++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xB1, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0, ++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xCA, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA1, 0x80, 0x65, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD5, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1, ++0x8E, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7C, 0x41, 0x80, 0x46, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x72, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, ++0x05, 0x12, 0x7D, 0x23, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x70, 0x80, 0x25, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04, ++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05, ++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, ++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8E, 0x80, 0xEF, 0x12, 0x7D, 0x42, 0x80, 0xEA, ++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, ++0xC8, 0x74, 0xFD, 0xF0, 0x12, 0x7C, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01, ++0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x31, 0xB7, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0, ++0x22, 0x12, 0x7D, 0x42, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, ++0xA1, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x31, 0x49, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33, ++0xF0, 0x22, 0xF1, 0xCA, 0x80, 0xEB, 0xF1, 0xD5, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, ++0x8B, 0x33, 0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, ++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, ++0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF, 0x8E, 0xF0, 0x12, ++0x43, 0xBA, 0x50, 0x1A, 0x00, 0x40, 0x50, 0x42, 0x00, 0x80, 0x50, 0x6D, 0x01, 0x00, 0x50, 0x81, ++0x02, 0x00, 0x50, 0x99, 0x04, 0x00, 0x00, 0x00, 0x50, 0xB6, 0xED, 0x54, 0x3F, 0x70, 0x04, 0xFE, ++0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x06, ++0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, ++0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x80, 0xEF, ++0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, ++0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49, 0xED, 0x70, 0x04, ++0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D, 0x00, 0xFC, 0x80, ++0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02, 0x7F, 0x00, 0xEF, ++0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D, 0x70, 0x04, 0xFE, ++0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13, 0x54, 0x3F, 0x7D, ++0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01, 0xE4, 0x74, 0x58, ++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0, 0x75, 0x8E, 0x02, ++0x91, 0x0E, 0x12, 0x68, 0x44, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x68, 0x51, 0x90, 0x8B, 0x09, ++0xEF, 0xF0, 0x12, 0x68, 0x5D, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0xF5, 0x55, ++0xF5, 0x21, 0x12, 0x72, 0x55, 0x12, 0x44, 0x9E, 0x12, 0x2E, 0x01, 0x7F, 0x03, 0x12, 0x78, 0x42, ++0x12, 0x7C, 0x3D, 0x12, 0x68, 0x0A, 0x12, 0x68, 0x75, 0x12, 0x68, 0x8A, 0x12, 0x68, 0x28, 0x12, ++0x68, 0x43, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0x5F, 0xC2, 0xAF, 0x90, 0x00, 0x80, 0xE0, ++0x44, 0x40, 0xF0, 0x51, 0x0E, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF, 0x11, 0xBB, 0x90, ++0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0xC6, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x50, 0xA3, 0xF0, ++0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1, 0x59, 0xE5, 0x55, ++0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x6B, 0xBD, 0x80, 0xD0, 0x90, ++0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0, 0xA3, 0xF0, 0xA3, ++0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x55, 0x31, 0x88, 0x7D, 0xFF, ++0x7F, 0x56, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, ++0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x0E, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x01, 0x30, ++0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0x88, 0xE4, 0xFD, 0x7F, ++0x52, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01, 0x70, 0x3B, 0x71, ++0x4E, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0x42, 0x90, 0x00, 0x46, 0xE0, 0x44, 0x04, 0xFD, 0x7F, ++0x46, 0x31, 0x88, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31, 0x88, 0x90, 0x00, ++0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0x88, 0x7F, 0x02, 0x71, 0x6A, 0x8F, 0x62, 0x90, ++0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x51, 0xE2, 0x22, 0xE0, 0x5F, 0xF0, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0xD3, ++0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, ++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x5F, 0xF0, ++0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, ++0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, ++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, ++0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D, 0x90, 0x8A, 0xDF, ++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, ++0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, ++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, 0xFF, 0x90, 0x00, ++0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, ++0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x0B, 0xD0, 0xD0, 0x92, ++0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F, 0xF0, 0x44, 0xF0, ++0xFD, 0x7F, 0x49, 0x31, 0x88, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F, 0x49, 0x21, 0x88, ++0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F, 0xF5, 0x60, 0xE4, ++0xFD, 0x7F, 0x0B, 0x51, 0x1E, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x1E, 0x71, 0x4E, 0xE4, 0xFF, 0x71, ++0x42, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFC, 0xA3, ++0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60, 0x7E, 0x01, 0x02, ++0x30, 0x62, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x51, 0xE2, 0x22, 0x7F, 0x0B, ++0x71, 0x6A, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4, 0xF5, 0x61, 0x80, ++0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF, 0x74, 0x01, 0xA8, ++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, 0x51, 0x0B, 0x90, ++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, ++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, ++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80, 0x4B, 0x90, 0x8B, ++0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, ++0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x0E, 0x90, 0x8B, 0x57, 0xE0, ++0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06, ++0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0x90, ++0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21, 0x88, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDA, 0x12, 0x43, ++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF, 0xE4, 0x3A, 0xFE, ++0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12, 0x43, 0x19, 0x12, ++0x24, 0x62, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, ++0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60, 0x22, 0x90, 0x8A, ++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0, 0x71, 0x00, 0x80, ++0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0x65, 0x5E, 0x60, 0x02, 0x91, 0x95, ++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F, 0x82, 0x8E, 0x83, ++0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF, 0x12, 0x43, 0x94, ++0x54, 0xE7, 0x01, 0x54, 0xDE, 0x02, 0x55, 0x0B, 0x03, 0x55, 0x14, 0x05, 0x55, 0x1D, 0x06, 0x55, ++0x58, 0x07, 0x55, 0x25, 0x08, 0x55, 0x2E, 0x09, 0x55, 0x36, 0x20, 0x55, 0x3F, 0x2C, 0x54, 0xF0, ++0x2D, 0x54, 0xF9, 0x2E, 0x55, 0x02, 0x3B, 0x55, 0x48, 0x4B, 0x00, 0x00, 0x55, 0x51, 0x90, 0x8A, ++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x85, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x8B, ++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0xB8, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, ++0x75, 0x00, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x39, 0x90, 0x8A, 0xD7, 0x12, 0x43, ++0x6B, 0x02, 0x75, 0x52, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x0F, 0x90, 0x8A, 0xD7, ++0x12, 0x43, 0x6B, 0xC1, 0xA6, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x9A, 0x90, 0x8A, ++0xD7, 0x12, 0x43, 0x6B, 0x81, 0x1E, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0x81, 0x90, ++0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7A, 0xC2, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7C, ++0x2B, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x70, ++0x02, 0xC1, 0xA1, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02, 0xC1, 0x9A, 0x90, ++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD0, ++0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01, 0x7B, 0x01, 0x7A, ++0x8A, 0x79, 0xD1, 0x12, 0x5E, 0xE4, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x13, 0x54, ++0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x88, 0x12, 0x43, ++0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x89, ++0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, ++0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, ++0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90, 0x8B, 0x51, 0xE0, ++0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6, 0xF0, 0x80, 0x33, ++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, ++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, ++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, ++0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2, 0x91, 0xA6, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06, 0x08, 0x80, 0x02, ++0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, ++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC, 0xF0, 0x90, 0x8B, ++0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0x6A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x02, ++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0x54, 0x1F, 0xFE, ++0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA, 0xEF, 0xF0, 0xA3, ++0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x03, 0x12, ++0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, ++0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, ++0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC, 0x83, 0x90, 0x8A, ++0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, ++0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, ++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0xEF, 0x12, ++0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x90, ++0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90, 0x8A, 0xDC, 0x12, ++0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0xA3, 0xE0, ++0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x24, 0x62, 0x8D, 0x82, 0x8C, 0x83, 0xA3, 0xF0, ++0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, ++0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, ++0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, ++0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, ++0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24, 0x81, 0xF9, 0x74, ++0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90, ++0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5, 0x0F, 0x75, 0xF0, ++0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5, 0x18, 0x89, 0x19, ++0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12, 0x43, 0x94, 0x58, ++0x34, 0x00, 0x58, 0x49, 0x01, 0x58, 0x5E, 0x02, 0x58, 0x73, 0x03, 0x58, 0x9C, 0x04, 0x58, 0xB1, ++0x05, 0x58, 0xC6, 0x06, 0x58, 0xEC, 0x0C, 0x59, 0x19, 0x0D, 0x59, 0x46, 0x0E, 0x59, 0x73, 0x0F, ++0x00, 0x00, 0x59, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80, 0x27, 0xE5, 0x0F, ++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, ++0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x21, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF5, 0x80, ++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, ++0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, ++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x21, 0xA7, 0x90, 0x04, 0x47, 0xE0, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0, 0x85, 0x11, 0x82, ++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x21, 0x9E, 0x90, 0x04, 0x4B, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, ++0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, ++0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, ++0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, ++0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, ++0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x50, 0xE0, 0x85, ++0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xC0, 0x03, 0xC0, ++0x02, 0xC0, 0x01, 0x12, 0x24, 0x62, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x12, 0x24, 0x62, ++0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5, 0x14, 0x24, 0x01, ++0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x24, 0x62, 0xFF, 0xAB, ++0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0, 0x01, 0xD0, 0x02, ++0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83, 0xC0, 0x82, 0xE0, ++0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, ++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82, ++0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, 0xE5, 0x0F, 0x25, ++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, ++0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x50, ++0x02, 0x41, 0xEC, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, ++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, ++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, ++0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x47, ++0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x40, 0x3C, ++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, ++0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x5E, ++0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0, 0x80, 0x0D, 0x90, ++0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, ++0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x40, 0x02, 0x61, ++0xA5, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, ++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80, 0x63, 0x90, 0x8A, ++0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, ++0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, ++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, ++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, ++0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, ++0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90, ++0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xE5, ++0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94, 0x20, 0x50, 0x32, ++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3, 0x9F, 0x40, 0x02, ++0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, ++0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7, 0xE0, 0x90, 0x8A, ++0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0x4E, 0x90, 0x8A, 0xE9, 0xE0, 0xFF, ++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xE7, ++0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0, 0x22, 0xEF, 0xD3, ++0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3, 0x94, 0x03, 0x40, ++0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xED, ++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A, 0xC7, 0xF0, 0x74, ++0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, ++0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90, 0x8A, 0xC5, 0xE0, ++0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF, 0xD3, 0x9E, 0x40, ++0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x04, 0x80, ++0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, ++0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, ++0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90, 0x8A, 0xC9, 0xF0, ++0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, ++0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, ++0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, ++0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, 0xC9, 0xE0, 0xFF, ++0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, ++0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75, 0xF0, 0x09, 0xEC, ++0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0, 0x09, 0xEC, 0x90, ++0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0xE4, ++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE5, 0xCB, 0xF0, ++0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, ++0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3, 0x9E, 0x40, 0x0C, ++0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED, 0x70, 0x02, 0xC1, ++0x93, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E, 0x90, 0x8A, 0xE1, ++0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x70, ++0x02, 0xC1, 0x93, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02, 0xC1, 0x93, 0xE4, ++0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3, 0xE0, 0xFD, 0x90, ++0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21, 0xEF, 0x24, 0xF0, ++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, ++0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0, 0x5E, 0xFE, 0xA3, ++0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F, 0x60, 0x08, 0x90, ++0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, ++0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A, 0xE3, 0xE0, 0x90, ++0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, ++0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, ++0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A, 0x8A, 0x1B, 0x89, ++0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F, 0x90, 0x8B, 0x42, ++0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42, 0xE4, 0x75, 0xF0, ++0x01, 0x12, 0x43, 0x74, 0x12, 0x24, 0x62, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75, 0xF0, 0x01, 0x12, ++0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9, 0x1C, 0xD0, 0xD0, ++0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B, ++0x90, 0x8B, 0x53, 0xE0, 0xFF, 0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF, ++0x7E, 0x01, 0x12, 0x74, 0x3B, 0xEF, 0x60, 0x47, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D, ++0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20, 0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0xD1, 0xE4, 0x90, ++0x8B, 0x48, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43, ++0x6B, 0x12, 0x24, 0x62, 0xFF, 0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2, ++0xD1, 0xE4, 0x90, 0x01, 0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0, ++0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44, ++0x80, 0xF0, 0x7B, 0x00, 0x7A, 0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A, ++0x8A, 0x79, 0xC5, 0xE1, 0x33, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4, 0x74, ++0xC5, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22, 0xE0, ++0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0, 0x30, ++0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, ++0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3, 0x13, ++0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74, 0x0F, ++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, ++0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, ++0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F, 0xC5, ++0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x90, 0x04, 0x1F, ++0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13, 0x13, ++0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5, 0x74, ++0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07, 0xAF, ++0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D, 0xF0, ++0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x59, ++0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04, 0xF0, ++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02, 0x11, ++0x6D, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, ++0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, ++0x01, 0xC4, 0x74, 0xF2, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28, 0xF5, ++0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0, 0x55, ++0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x89, 0x90, 0x01, 0x34, 0x74, 0x01, 0xF0, ++0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51, 0x85, ++0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF, 0xE5, ++0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x46, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x46, 0xE5, ++0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F, 0xFF, ++0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, ++0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, ++0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94, 0x04, ++0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, 0x5F, ++0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53, 0x54, ++0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, ++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5, 0x54, ++0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, ++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7, 0x36, ++0xAF, 0x08, 0x12, 0x5C, 0xC3, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, ++0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, ++0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D, 0xAB, ++0x09, 0xAF, 0x08, 0x12, 0x5C, 0x66, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A, 0x90, ++0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, ++0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90, 0x01, ++0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80, 0x09, ++0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x21, 0x90, 0x01, ++0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4, 0x59, ++0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0x12, 0x5F, 0xA4, 0xE5, ++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90, ++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF, ++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8, ++0x00, 0x75, 0xE8, 0x00, 0x12, 0x51, 0x9D, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52, ++0x0E, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B, ++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4, ++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, ++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE6, 0x90, 0x8B, 0x08, 0x74, ++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, ++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, ++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, ++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E, ++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x55, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4E, ++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3E, ++0xB1, 0x5F, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, ++0x2D, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, ++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x02, 0x04, 0x7F, 0x01, 0xB1, 0x82, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x43, ++0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74, 0x02, ++0xF0, 0x43, 0x55, 0x40, 0x11, 0x84, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05, 0x22, ++0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF, 0x12, ++0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16, 0x90, ++0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08, 0xF0, ++0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, ++0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, ++0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, ++0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21, 0xB4, ++0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, ++0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03, 0x12, ++0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21, 0xB4, ++0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, ++0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74, 0x40, ++0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25, 0x54, ++0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x28, 0x90, 0x01, 0x37, 0x74, 0x02, ++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x18, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x08, ++0x12, 0x48, 0xFE, 0x12, 0x7D, 0xC1, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03, ++0x12, 0x48, 0xFE, 0x74, 0xF2, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07, ++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, ++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05, ++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, ++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0A, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x04, 0x7F, 0x06, 0xB1, 0x82, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x03, 0x12, 0x78, ++0x35, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70, ++0x02, 0xE1, 0x4E, 0xEF, 0x12, 0x43, 0x94, 0x65, 0xB0, 0x00, 0x65, 0xEA, 0x01, 0x66, 0x30, 0x02, ++0x66, 0x6A, 0x03, 0x66, 0xA2, 0x04, 0x66, 0xDB, 0x05, 0x67, 0x16, 0x06, 0x00, 0x00, 0x67, 0x4E, ++0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4, ++0x05, 0x04, 0xF1, 0x5D, 0xE1, 0x4E, 0xEF, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x16, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xA4, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, ++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, ++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, ++0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0xE1, 0x4E, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, ++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60, 0x02, 0xE1, 0x4E, 0xF1, 0x67, 0xE1, 0x4E, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, ++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x08, 0xEE, 0xB4, ++0x03, 0x04, 0x7F, 0x01, 0xF1, 0x53, 0xF1, 0xD0, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, ++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, ++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, ++0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x06, 0xEE, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xB9, ++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, ++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, ++0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x09, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0xF1, 0xAF, 0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, ++0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, ++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, ++0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x0B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01, ++0xF1, 0x81, 0xF1, 0xC3, 0x80, 0x38, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, ++0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, ++0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xF1, ++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xDD, 0xD0, 0xD0, ++0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22, ++0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04, ++0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, ++0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90, ++0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D, ++0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, ++0x7C, 0x4A, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74, ++0x03, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22, ++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, ++0x74, 0x6F, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3, 0x13, 0x90, 0xFD, 0x10, ++0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29, ++0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90, 0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3, ++0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B, 0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31, ++0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01, 0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5, ++0x32, 0xF0, 0x22, 0x22, 0x90, 0x00, 0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00, ++0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F, 0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09, ++0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00, 0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22, ++0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74, ++0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0, ++0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06, ++0xC0, 0x07, 0x7D, 0x91, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0x74, 0x68, 0xFF, 0xA3, 0xF0, 0x53, 0x91, ++0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE, 0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52, ++0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0, 0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00, ++0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D, 0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5, ++0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00, 0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90, ++0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5, 0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0, ++0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90, 0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06, ++0x90, 0x00, 0x56, 0x74, 0x04, 0xF0, 0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08, ++0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, ++0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30, ++0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0, 0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, ++0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D, 0xF0, 0x22, 0xAD, 0x07, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1, ++0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, ++0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, ++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB, ++0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, ++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, ++0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0xB9, ++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, ++0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, ++0xFE, 0xD3, 0x9F, 0x40, 0x02, 0x41, 0xF3, 0xEE, 0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0, ++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, ++0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, ++0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, ++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3, ++0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0, 0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0, ++0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13, ++0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A, 0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0, ++0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80, ++0x42, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x41, 0x17, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A, ++0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, ++0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10, ++0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF, 0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03, ++0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, ++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66, 0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90, ++0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, ++0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24, ++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, ++0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, ++0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, ++0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44, ++0x80, 0xFD, 0x12, 0x5C, 0x4E, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A, ++0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x03, 0x02, 0x72, 0x54, 0x75, ++0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x72, ++0x4B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, ++0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x03, 0x02, 0x72, 0x4B, 0xEF, ++0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, ++0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, ++0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x25, 0xE0, ++0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD6, ++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, ++0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F, 0xA3, 0xF0, ++0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9, 0xF0, 0x90, ++0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xC3, 0x94, ++0x05, 0x40, 0x02, 0xC1, 0x9C, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0, 0x9E, 0x40, ++0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90, 0x8A, 0xD0, ++0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE, 0x74, 0x23, ++0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF, 0x90, 0x40, ++0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8, 0xF0, 0x90, ++0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0, 0x75, 0x0F, ++0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF, 0xD3, 0x90, ++0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0D, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xE1, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, ++0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2, 0xCF, ++0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x24, 0x62, 0xFF, 0x7E, 0x00, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, ++0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, ++0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, ++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, ++0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x7E, ++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, ++0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, ++0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, ++0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, ++0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04, 0x12, ++0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12, 0x42, ++0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, ++0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0x90, ++0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x24, 0x7B, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, ++0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, ++0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC, 0xA3, ++0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, ++0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED, 0x9B, ++0xEC, 0x9A, 0x40, 0x05, 0x31, 0x78, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, ++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3, ++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x03, 0x02, 0x71, 0xAF, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x03, ++0x02, 0x70, 0x7D, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, ++0x94, 0x19, 0x40, 0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, ++0x11, 0x40, 0x2E, 0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1, ++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, ++0x94, 0x03, 0x40, 0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, ++0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, ++0xC3, 0x94, 0x30, 0x50, 0x0B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x02, 0x70, 0x28, ++0x90, 0x89, 0x43, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x70, 0x1D, 0x90, 0x8A, 0xCF, 0xE0, 0x24, ++0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF, ++0xE0, 0xFF, 0xEE, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38, ++0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, ++0x50, 0x16, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, ++0xFF, 0x90, 0x8A, 0xD1, 0xE0, 0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82, ++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74, ++0x05, 0xF0, 0x80, 0x11, 0xEF, 0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0, ++0x80, 0x03, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A, ++0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44, ++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A, ++0xDD, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4, ++0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82, ++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43, ++0x5F, 0xE0, 0xB4, 0x01, 0x11, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, ++0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x21, 0xAC, 0xEC, 0x64, 0x06, ++0x60, 0x02, 0x21, 0xAF, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E, ++0x00, 0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xDB, 0xEE, ++0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE0, 0x90, 0x8A, 0xDD, 0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, ++0xD3, 0x94, 0x04, 0x50, 0x47, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4, ++0xF5, 0x82, 0x85, 0xF0, 0x83, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93, ++0xFF, 0x7E, 0x00, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90, ++0x8A, 0xDB, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, ++0xE0, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0, ++0xC3, 0x13, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70, ++0x5D, 0x90, 0x8A, 0xDD, 0x04, 0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0, ++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90, ++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70, ++0x32, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F, ++0xEF, 0x90, 0x8A, 0xDD, 0xB4, 0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3, ++0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, ++0x8A, 0xDD, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, ++0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, ++0xFF, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x12, 0x69, 0x38, 0x90, ++0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94, ++0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0, ++0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4, ++0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, ++0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0, ++0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, ++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, ++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, ++0xF0, 0x02, 0x6B, 0xC2, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, ++0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4, 0xF0, ++0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, ++0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x81, 0x0E, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x00, ++0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12, 0x43, ++0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F, 0xE4, ++0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, ++0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x74, ++0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88, ++0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, ++0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01, 0x93, ++0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE, 0xEF, ++0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, ++0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, ++0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0C, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, ++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F, 0xF0, ++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0, 0x09, ++0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34, ++0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x41, 0x7D, 0x22, 0x12, ++0x24, 0x62, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE, 0x74, ++0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20, 0x0A, ++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0, ++0xA3, 0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5, ++0x82, 0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D, ++0xE0, 0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90, ++0x8B, 0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x32, 0x15, ++0x80, 0xC6, 0x7F, 0x01, 0x22, 0x12, 0x24, 0x62, 0xF5, 0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, ++0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x25, 0x14, 0x00, 0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12, ++0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0, ++0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30, ++0xE0, 0x25, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x10, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, ++0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12, ++0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B, 0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11, ++0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22, ++0x12, 0x24, 0x62, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00, ++0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90, ++0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, ++0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x12, 0xF0, ++0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7, ++0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x24, 0x62, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90, ++0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0, ++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03, ++0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, ++0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, ++0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x12, 0x24, 0x62, 0xC3, ++0x13, 0x20, 0xE0, 0x02, 0xC1, 0xED, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF, ++0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, ++0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x24, 0x62, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, ++0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, ++0x12, 0x24, 0x62, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54, 0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, ++0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0xD9, 0x90, 0x8A, ++0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF, 0x13, 0x13, ++0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF, ++0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E, ++0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, 0x12, 0x31, 0x9D, 0x80, 0x0B, 0xE4, 0x90, ++0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x31, 0x2C, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, ++0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54, ++0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, ++0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32, ++0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0, ++0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01, ++0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F, ++0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, ++0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, ++0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDA, ++0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFD, ++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x24, 0x62, ++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x10, ++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x24, 0x62, 0xFE, 0x54, 0x40, 0xFD, 0xEF, 0x54, ++0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE, 0xEF, 0x54, 0xFB, 0x4E, 0xF0, ++0x20, 0xE0, 0x02, 0xE1, 0xE2, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x13, ++0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x31, ++0x2C, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, ++0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, ++0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C, 0x90, 0x01, 0x3E, 0x74, 0x03, ++0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x31, 0xB7, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0D, 0xA3, 0xE0, 0x64, 0x06, ++0x60, 0x2C, 0x7F, 0x06, 0x12, 0x65, 0x82, 0x80, 0x25, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x1B, ++0x7F, 0x01, 0x12, 0x65, 0x82, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x09, 0x7D, 0x01, 0xAF, ++0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03, 0x12, 0x7D, 0xC1, 0x7F, 0x01, ++0x80, 0x4C, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0x7D, 0x03, 0x7F, 0x02, ++0x12, 0x31, 0x49, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80, 0x1B, 0x90, 0x8B, 0x2D, 0xE0, ++0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, ++0x02, 0x05, 0x7F, 0x01, 0x12, 0x65, 0x82, 0x11, 0x35, 0x12, 0x4A, 0xFC, 0x7F, 0x03, 0x11, 0x42, ++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48, ++0xFE, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32, ++0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04, 0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54, ++0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, ++0x22, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x38, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, ++0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, ++0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5, ++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, ++0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12, 0x43, 0x94, 0x78, 0xF8, 0x00, 0x7A, 0x6B, 0x01, 0x79, ++0x01, 0x02, 0x79, 0x01, 0x03, 0x79, 0x01, 0x04, 0x7A, 0x6B, 0x05, 0x7A, 0x35, 0x80, 0x7A, 0x4E, ++0x81, 0x7A, 0x6B, 0x82, 0x00, 0x00, 0x7A, 0x67, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x51, 0x72, 0x41, ++0x6B, 0x90, 0x8A, 0xE8, 0xE0, 0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80, ++0x0F, 0xEF, 0x90, 0x8A, 0xE5, 0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0, ++0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x08, 0x50, 0x78, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, ++0xE5, 0xE0, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE9, ++0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE, ++0x2F, 0xFF, 0xEE, 0xFD, 0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, ++0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0x88, 0x80, 0x2B, 0xFF, 0xFD, ++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A, ++0x3C, 0xF5, 0x83, 0xE0, 0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9, ++0xE0, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80, ++0x8D, 0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE8, 0xE0, ++0x64, 0x04, 0x60, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, ++0x10, 0x12, 0x24, 0xF5, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0, ++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x18, 0x12, 0x24, 0xF5, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, ++0xD0, 0x00, 0x12, 0x43, 0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED, ++0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12, 0x24, 0xF5, 0xD0, 0x03, 0xD0, 0x02, 0xD0, ++0x01, 0xD0, 0x00, 0x12, 0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0, ++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x25, 0x08, 0x90, 0x8A, 0xEF, 0x12, ++0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, ++0x12, 0x2B, 0x08, 0x80, 0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, ++0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x32, 0x15, 0x80, 0x1D, 0x90, 0x8A, ++0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, ++0xEF, 0xF0, 0x12, 0x31, 0x82, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, ++0xAF, 0x22, 0x8F, 0x0F, 0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3, ++0xE0, 0xFF, 0xC3, 0x9E, 0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3, 0xE0, ++0x04, 0xF0, 0x80, 0xE5, 0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3, ++0xE5, 0x0F, 0xF0, 0x90, 0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD, ++0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02, ++0x2D, 0x4D, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74, ++0x04, 0xF0, 0xA3, 0xE4, 0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90, ++0x8A, 0xE1, 0xF0, 0x12, 0x24, 0x62, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0, ++0x30, 0xE0, 0x0B, 0x90, 0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90, ++0x8A, 0xDB, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, ++0x8A, 0xDD, 0xE0, 0x24, 0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D, ++0xFF, 0x24, 0x01, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74, ++0x02, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0, ++0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3, ++0xE0, 0x2F, 0xFF, 0x90, 0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC, ++0xF5, 0x83, 0xE0, 0xFF, 0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, ++0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x11, 0x89, 0xEF, 0x70, 0x45, 0x90, ++0x01, 0xC3, 0xE0, 0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0, ++0x94, 0x03, 0x40, 0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2, ++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x32, 0x15, 0x80, 0xCF, ++0x90, 0x01, 0xC6, 0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74, ++0xFF, 0xF0, 0x80, 0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB, ++0x70, 0x05, 0xF0, 0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0, ++0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0, ++0x90, 0x8A, 0xDE, 0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02, ++0xA3, 0xE0, 0x60, 0x02, 0x61, 0x16, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x24, 0x62, 0x90, 0x8B, ++0x05, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61, ++0x22, 0x91, 0x4A, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, ++0x7F, 0x78, 0x7E, 0x08, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x1C, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E, ++0x0C, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x20, 0x12, 0x25, 0x08, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x22, ++0x65, 0x90, 0x8B, 0x24, 0x12, 0x25, 0x08, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01, ++0x0D, 0x12, 0x43, 0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43, ++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x78, 0x7E, 0x08, ++0x12, 0x2B, 0x08, 0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80, ++0x96, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2B, 0x08, 0x90, 0x8B, 0x24, 0x12, 0x43, ++0x53, 0xEF, 0x44, 0x02, 0xFF, 0xEC, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x00, 0x7E, 0x08, ++0x12, 0x2B, 0x08, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x28, 0x12, 0x25, 0x08, ++0x90, 0x80, 0x96, 0x12, 0x25, 0x14, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2B, ++0x08, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x30, ++0x2C, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x00, ++0x00, 0x00, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x30, 0x2C, 0x90, 0x00, 0x11, 0xE0, 0x54, 0xF6, 0xF0, ++0x02, 0x52, 0x0E, 0x91, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, ++0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0xB1, 0x42, 0x90, 0x8B, 0x33, 0x74, 0x04, ++0xF0, 0x22, 0x90, 0x00, 0x11, 0xE0, 0x44, 0x09, 0xF0, 0x12, 0x52, 0x0E, 0x90, 0x8B, 0x1C, 0x12, ++0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2B, 0x08, 0x90, ++0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E, 0x0C, 0x12, ++0x2B, 0x08, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x00, ++0x7E, 0x08, 0x12, 0x2B, 0x08, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, ++0x08, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2B, 0x08, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x03, ++0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x30, 0x2C, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, ++0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x30, 0x2C, ++0x22, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E, ++0x14, 0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, ++0x90, 0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0, ++0x22, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01, ++0xC6, 0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18, ++0x90, 0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01, ++0x12, 0x45, 0xA2, 0xB1, 0xC1, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x01, 0x57, 0xE0, 0x60, ++0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE0, ++0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0, 0x04, 0xF0, 0x53, ++0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0x40, 0x0E, 0xE5, ++0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0, 0x90, 0x01, 0x5B, ++0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0xE4, 0x90, ++0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, ++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B, 0x4F, 0xF0, 0xA3, ++0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xA3, ++0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4F, ++0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12, 0x32, 0x15, 0x90, ++0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x00, 0xFB, 0x98}; ++ ++// =================== v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05 ===================== ++u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength] = { ++0xC2, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x10, 0xC0, 0x3E, 0x01, 0x00, ++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x60, 0xF3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x02, 0x67, 0x5B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00, ++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02, ++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09, ++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08, ++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18, ++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21, ++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20, ++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10, ++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20, ++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, ++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05, ++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E, ++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E, ++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A, ++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04, ++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, ++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40, ++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8, ++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C, ++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28, ++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64, ++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02, ++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E, ++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, ++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06, ++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50, ++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22, ++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06, ++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8, ++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22, ++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2, ++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70, ++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5, ++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3, ++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01, ++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, ++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22, ++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A, ++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, ++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB, ++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29, ++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09, ++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8, ++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC, ++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4, ++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA, ++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82, ++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0, ++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93, ++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, ++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, ++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, ++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60, ++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03, ++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60, ++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B, ++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A, ++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, ++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5, ++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5, ++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75, ++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54, ++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C, ++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x66, 0x20, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5, ++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18, ++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90, ++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B, ++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74, ++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90, ++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22, ++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC, ++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F, ++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01, ++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC, ++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74, ++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74, ++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53, ++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74, ++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D, ++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01, ++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54, ++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22, ++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20, ++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20, ++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22, ++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60, ++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2, ++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, ++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22, ++0x02, 0x46, 0x6E, 0x02, 0x51, 0x39, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6, ++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C, ++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01, ++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B, ++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F, ++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8, ++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, ++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE, ++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64, ++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90, ++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0, ++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58, ++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25, ++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E, ++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x36, 0x75, 0x7D, 0x02, 0x7F, ++0x03, 0x12, 0x36, 0x75, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12, ++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x66, 0x20, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B, ++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x36, 0xE6, 0x7D, 0x02, 0x7F, 0x03, 0x12, ++0x36, 0xE6, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0, ++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90, ++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09, ++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15, ++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08, ++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43, ++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, ++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90, ++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B, ++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xF5, 0x24, 0x14, 0x60, ++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90, ++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A, ++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, ++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, ++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22, ++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4, ++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0, ++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF, ++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, ++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12, ++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0, ++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x2D, 0xBF, 0x01, ++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE, 0x12, 0x45, 0x09, 0x90, 0x05, ++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE, ++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24, ++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E, ++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, ++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50, ++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01, ++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, ++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, ++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F, ++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, ++0x66, 0x20, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70, ++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5, ++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12, ++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F, ++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18, ++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04, ++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08, ++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90, ++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B, ++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, ++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, ++0x2D, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x36, ++0xE6, 0x12, 0x7A, 0x6D, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21, ++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8, ++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xDE, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20, ++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x4F, 0xED, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05, ++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0, ++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0, ++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01, ++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0, ++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x66, 0x65, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22, ++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43, ++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41, ++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02, ++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90, ++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F, ++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01, ++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12, ++0x35, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, ++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, ++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3, ++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31, ++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34, ++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F, ++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, ++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B, ++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, ++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11, ++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0, ++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, ++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, ++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24, ++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, ++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, ++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09, ++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x52, 0x3C, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01, ++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90, ++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01, ++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90, ++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05, ++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90, ++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, ++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B, ++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E, ++0x12, 0x65, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02, ++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F, ++0x01, 0x12, 0x7B, 0x49, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x66, 0x20, 0xE5, 0x36, ++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19, ++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, ++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A, ++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7D, 0xBE, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, ++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4, ++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, ++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, ++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, ++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, ++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54, ++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F, ++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60, ++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C, ++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F, ++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0, ++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02, ++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D, ++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x7B, 0x49, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60, ++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC0, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02, ++0x04, 0xF1, 0xAD, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC4, 0xE1, 0x55, ++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xAF, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0, ++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xC8, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA0, 0x80, 0x65, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD3, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1, ++0x8D, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7A, 0x5E, 0x80, 0x46, 0x90, ++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x71, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, ++0x05, 0x12, 0x7B, 0x37, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x6F, 0x80, 0x25, ++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04, ++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05, ++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, ++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8D, 0x80, 0xEF, 0xF1, 0xED, 0x80, 0xEB, 0xF1, ++0x8D, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x2D, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, ++0x74, 0xFD, 0xF0, 0x12, 0x7A, 0x6D, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01, 0x3E, ++0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0, 0x22, ++0xF1, 0xED, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, 0xA0, 0x7D, ++0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xF0, 0x22, ++0xF1, 0xC8, 0x80, 0xEB, 0xF1, 0xD3, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, ++0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, 0x8D, ++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, 0x8B, 0x1C, ++0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9, ++0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, ++0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, ++0x00, 0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, ++0x2A, 0x7F, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, ++0x03, 0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, ++0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34, ++0x81, 0x22, 0x90, 0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF, ++0x8E, 0xF0, 0x12, 0x43, 0xBA, 0x50, 0x8D, 0x00, 0x40, 0x50, 0xB5, 0x00, 0x80, 0x50, 0xE0, 0x01, ++0x00, 0x50, 0xF4, 0x02, 0x00, 0x51, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x51, 0x29, 0xED, 0x54, 0x3F, ++0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, ++0xEF, 0x78, 0x06, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33, ++0xCE, 0xD8, 0xF9, 0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, ++0x7F, 0x80, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13, ++0xD8, 0xF9, 0x78, 0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49, ++0xED, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D, ++0x00, 0xFC, 0x80, 0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02, ++0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D, ++0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13, ++0x54, 0x3F, 0x7D, 0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01, ++0xE4, 0x74, 0x58, 0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0, ++0x75, 0x8E, 0x02, 0x91, 0x81, 0x12, 0x67, 0x0E, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x67, 0x1B, ++0x90, 0x8B, 0x09, 0xEF, 0xF0, 0x12, 0x67, 0x27, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, ++0xE4, 0xF5, 0x55, 0xF5, 0x21, 0x12, 0x71, 0x16, 0x12, 0x44, 0x9E, 0x12, 0x32, 0x3D, 0x7F, 0x03, ++0x12, 0x76, 0xAB, 0x12, 0x7A, 0x5A, 0x12, 0x66, 0xD4, 0x12, 0x67, 0x3F, 0x12, 0x67, 0x54, 0x12, ++0x66, 0xF2, 0x12, 0x67, 0x0D, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0xD2, 0xC2, 0xAF, 0x90, ++0x00, 0x80, 0xE0, 0x44, 0x40, 0xF0, 0x51, 0x81, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF, ++0x31, 0x2E, 0x90, 0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0x39, 0x90, 0x01, 0xC4, 0xF0, 0x74, ++0x51, 0xA3, 0xF0, 0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1, ++0xCC, 0xE5, 0x55, 0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x68, 0x42, ++0x80, 0xD0, 0x90, 0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0, ++0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0xFB, 0x7D, 0xFF, 0x7F, 0x55, 0x31, ++0xFB, 0x7D, 0xFF, 0x7F, 0x56, 0x31, 0xFB, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3, ++0xC0, 0xD0, 0x8F, 0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x81, 0xD0, 0xD0, 0x92, 0xAF, 0x22, ++0x90, 0x01, 0x30, 0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3, ++0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0xFB, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0xFB, ++0xE4, 0xFD, 0x7F, 0x52, 0x31, 0xFB, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01, ++0x70, 0x3B, 0x71, 0xC1, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0xB5, 0x90, 0x00, 0x46, 0xE0, 0x44, ++0x04, 0xFD, 0x7F, 0x46, 0x31, 0xFB, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31, ++0xFB, 0x90, 0x00, 0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0xFB, 0x7F, 0x02, 0x71, 0xDD, ++0x8F, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x71, 0x55, 0x22, 0xE0, 0x5F, ++0xF0, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF, ++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF, ++0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, ++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, ++0xE0, 0x5F, 0xF0, 0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, ++0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x81, 0x90, 0x8A, ++0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, ++0x90, 0x00, 0x46, 0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D, ++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, ++0xC4, 0x54, 0xF0, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF, ++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, ++0xFF, 0x90, 0x00, 0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x81, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, ++0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x7E, ++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F, ++0xF0, 0x44, 0xF0, 0xFD, 0x7F, 0x49, 0x31, 0xFB, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F, ++0x49, 0x21, 0xFB, 0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F, ++0xF5, 0x60, 0xE4, 0xFD, 0x7F, 0x0B, 0x51, 0x91, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x91, 0x71, 0xC1, ++0xE4, 0xFF, 0x71, 0xB5, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD, ++0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60, ++0x7E, 0x01, 0x02, 0x35, 0xAB, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x71, 0x55, ++0x22, 0x7F, 0x0B, 0x71, 0xDD, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4, ++0xF5, 0x61, 0x80, 0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF, ++0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF, ++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, ++0x51, 0x7E, 0x90, 0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, ++0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, ++0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80, ++0x4B, 0x90, 0x8B, 0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, ++0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x81, 0x90, ++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, ++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, ++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF, ++0x22, 0xE4, 0x90, 0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21, ++0xFB, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A, ++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF, ++0xE4, 0x3A, 0xFE, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12, ++0x43, 0x19, 0x12, 0x29, 0xD9, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43, ++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60, ++0x22, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0, ++0x71, 0x73, 0x80, 0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0x65, 0x5E, 0x60, ++0x02, 0xB1, 0x08, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F, ++0x82, 0x8E, 0x83, 0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF, ++0x12, 0x43, 0x94, 0x55, 0x5A, 0x01, 0x55, 0x51, 0x02, 0x55, 0x7E, 0x03, 0x55, 0x87, 0x05, 0x55, ++0x90, 0x06, 0x55, 0xCB, 0x07, 0x55, 0x98, 0x08, 0x55, 0xA1, 0x09, 0x55, 0xA9, 0x20, 0x55, 0xB2, ++0x2C, 0x55, 0x63, 0x2D, 0x55, 0x6C, 0x2E, 0x55, 0x75, 0x3B, 0x55, 0xBB, 0x4B, 0x00, 0x00, 0x55, ++0xC4, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x72, 0xFC, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, ++0x02, 0x73, 0x02, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0x2F, 0x90, 0x8A, 0xD7, 0x12, ++0x43, 0x6B, 0x02, 0x73, 0x77, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0xB0, 0x90, 0x8A, ++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0xC9, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x72, 0xD0, ++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0xE1, 0x19, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, ++0x11, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x81, 0x91, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, ++0x76, 0xEA, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0xDE, 0x90, 0x8A, 0xD7, 0x12, 0x43, ++0x6B, 0x02, 0x7A, 0x48, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, ++0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, ++0xE0, 0xFD, 0x70, 0x02, 0xE1, 0x14, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, ++0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02, ++0xE1, 0x0D, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0, ++0x90, 0x8A, 0xD0, 0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01, ++0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD1, 0x12, 0x5F, 0x57, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13, ++0x13, 0x13, 0x54, 0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, ++0x88, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02, ++0x90, 0x00, 0x89, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, ++0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51, ++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90, ++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6, ++0xF0, 0x80, 0x33, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, ++0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, ++0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, ++0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2, ++0xB1, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06, ++0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51, ++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC, ++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0xDD, 0x90, 0x01, 0xC6, ++0xE0, 0x44, 0x02, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, ++0x54, 0x1F, 0xFE, 0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA, ++0xEF, 0xF0, 0xA3, 0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, ++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00, ++0x04, 0x12, 0x42, 0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90, ++0x8A, 0xDA, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC, ++0x83, 0x90, 0x8A, 0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, ++0xF9, 0x74, 0x87, 0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, ++0x43, 0x6B, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, ++0x6B, 0xEF, 0x12, 0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, ++0x20, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90, ++0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, ++0xFC, 0xA3, 0xE0, 0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x29, 0xD9, 0x8D, 0x82, 0x8C, ++0x83, 0xA3, 0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5, ++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09, ++0xEF, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, ++0x12, 0x43, 0x5F, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, ++0x87, 0x2B, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, ++0xE4, 0x34, 0x89, 0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24, ++0x81, 0xF9, 0x74, 0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09, ++0xE5, 0x0F, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5, ++0x0F, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5, ++0x18, 0x89, 0x19, 0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12, ++0x43, 0x94, 0x58, 0xA7, 0x00, 0x58, 0xBC, 0x01, 0x58, 0xD1, 0x02, 0x58, 0xE6, 0x03, 0x59, 0x0F, ++0x04, 0x59, 0x24, 0x05, 0x59, 0x39, 0x06, 0x59, 0x5F, 0x0C, 0x59, 0x8C, 0x0D, 0x59, 0xB9, 0x0E, ++0x59, 0xE6, 0x0F, 0x00, 0x00, 0x5A, 0x1A, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, ++0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80, ++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, ++0xF0, 0xA3, 0x74, 0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, ++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x41, 0x1A, 0xE5, ++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, ++0x74, 0xF5, 0x80, 0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, ++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, ++0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x41, 0x1A, 0x90, ++0x04, 0x47, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0, ++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x41, 0x11, 0x90, 0x04, 0x4B, 0xE0, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82, ++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA, ++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, ++0xF0, 0x90, 0x04, 0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0x12, 0x42, 0x4D, 0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, ++0x12, 0x42, 0x5F, 0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, ++0x50, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, ++0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, ++0x12, 0x29, 0xD9, 0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5, ++0x14, 0x24, 0x01, 0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29, ++0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0, ++0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83, ++0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, ++0xD0, 0x83, 0xF0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF, ++0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, ++0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, ++0xE0, 0x4E, 0x60, 0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, ++0x94, 0x00, 0x50, 0x02, 0x61, 0x5F, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, ++0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, ++0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6, ++0xE0, 0x24, 0x10, 0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5, ++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, ++0x4E, 0x60, 0x47, 0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, ++0x00, 0x40, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, ++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0, ++0x80, 0x0D, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5, ++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, ++0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10, ++0x40, 0x02, 0x81, 0x18, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, ++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, ++0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80, ++0x63, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, ++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, ++0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00, ++0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, ++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, ++0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04, ++0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09, ++0xE5, 0x0F, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75, ++0xF0, 0x09, 0xE5, 0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94, ++0x20, 0x50, 0x32, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3, ++0x9F, 0x40, 0x02, 0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, ++0xE0, 0xC3, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7, ++0xE0, 0x90, 0x8A, 0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0xC1, 0x90, 0x8A, ++0xE9, 0xE0, 0xFF, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, ++0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0, ++0x22, 0xEF, 0xD3, 0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3, ++0x94, 0x03, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0, ++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, ++0xF5, 0x83, 0xED, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A, ++0xC7, 0xF0, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5, ++0xF0, 0x90, 0x8A, 0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90, ++0x8A, 0xC5, 0xE0, 0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF, ++0xD3, 0x9E, 0x40, 0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, ++0xAF, 0x04, 0x80, 0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, ++0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, ++0xF5, 0x83, 0xE0, 0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90, ++0x8A, 0xC9, 0xF0, 0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, ++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, ++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0xC1, 0x90, 0x8A, ++0xC9, 0xE0, 0xFF, 0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, ++0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75, ++0xF0, 0x09, 0xEC, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0, ++0x09, 0xEC, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25, ++0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, ++0xE5, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, ++0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3, ++0x9E, 0x40, 0x0C, 0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED, ++0x70, 0x02, 0xE1, 0x06, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E, ++0x90, 0x8A, 0xE1, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A, ++0xE2, 0xE0, 0x70, 0x02, 0xE1, 0x06, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02, ++0xE1, 0x06, 0xE4, 0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3, ++0xE0, 0xFD, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21, ++0xEF, 0x24, 0xF0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, ++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, ++0x27, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8, ++0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0, ++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, ++0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F, ++0x60, 0x08, 0x90, 0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, ++0x8A, 0xE0, 0xE0, 0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A, ++0xE3, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, ++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, ++0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, ++0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91, ++0xC1, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A, ++0x8A, 0x1B, 0x89, 0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F, ++0x90, 0x8B, 0x42, 0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42, ++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x43, 0x74, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75, ++0xF0, 0x01, 0x12, 0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9, ++0x1C, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4, ++0x74, 0xA6, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22, ++0xE0, 0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0, ++0x30, 0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3, ++0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74, ++0x0F, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F, ++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F, ++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34, ++0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, ++0x83, 0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3, ++0x13, 0x90, 0xFD, 0x10, 0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F, ++0xA6, 0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE, 0x90, 0x04, ++0x1F, 0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13, ++0x13, 0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5, ++0x74, 0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07, ++0xAF, 0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D, ++0xF0, 0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, ++0x59, 0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04, ++0xF0, 0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02, ++0x11, 0x6E, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, ++0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, ++0x90, 0x01, 0xC4, 0x74, 0xF3, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28, ++0xF5, 0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0, ++0x55, 0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x8A, 0x90, 0x01, 0x34, 0x74, 0x01, ++0xF0, 0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51, ++0x85, 0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF, ++0xE5, 0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x47, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x47, ++0xE5, 0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F, ++0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, ++0xF0, 0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5, ++0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94, ++0x04, 0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, ++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53, ++0x54, 0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, ++0x43, 0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5, ++0x54, 0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5, ++0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7, ++0x36, 0xAF, 0x08, 0x12, 0x5D, 0x36, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, ++0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, ++0xE5, 0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D, ++0xAB, 0x09, 0xAF, 0x08, 0x12, 0x5C, 0xD9, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A, ++0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, ++0xF0, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90, ++0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80, ++0x09, 0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x20, 0x90, ++0x01, 0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4, ++0x59, 0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0xB1, 0x5F, 0xE5, ++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90, ++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF, ++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8, ++0x00, 0x75, 0xE8, 0x00, 0x12, 0x52, 0x10, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52, ++0x81, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B, ++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4, ++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, ++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE7, 0x90, 0x8B, 0x08, 0x74, ++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, ++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, ++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, ++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0, ++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E, ++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x56, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4F, ++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3F, ++0xB1, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, ++0x2E, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, ++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x02, 0x05, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, ++0x43, 0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74, ++0x02, 0xF0, 0x43, 0x55, 0x40, 0x11, 0x85, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05, ++0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF, ++0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16, ++0x90, 0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64, ++0x06, 0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08, ++0xF0, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0, ++0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, ++0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, ++0x74, 0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21, ++0xB4, 0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, ++0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03, ++0x12, 0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21, ++0xB4, 0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, ++0x4A, 0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74, ++0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25, ++0x54, 0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x27, 0x90, 0x01, 0x37, 0x74, ++0x02, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x17, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, ++0x07, 0x12, 0x48, 0xFE, 0xD1, 0x20, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03, ++0x12, 0x48, 0xFE, 0x74, 0xF3, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07, ++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, ++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05, ++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, ++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90, ++0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44, 0x80, 0xF0, 0x7B, 0x00, 0x7A, ++0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A, 0x8A, 0x79, 0xC5, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B, 0x90, 0x8B, 0x53, 0xE0, 0xFF, ++0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF, 0x7E, 0x01, 0xD1, 0x8A, 0xEF, ++0x60, 0x49, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20, ++0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0x12, 0x5F, 0x57, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x6B, ++0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, ++0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2, 0x12, 0x5F, 0x57, 0x90, 0x01, ++0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, ++0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0B, 0xA3, 0xE0, 0x64, ++0x06, 0x60, 0x05, 0x7F, 0x06, 0x12, 0x7B, 0x49, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x02, ++0xD1, 0x13, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48, 0xFE, 0x22, ++0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E, 0x14, ++0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x90, ++0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x22, ++0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01, 0xC6, ++0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18, 0x90, ++0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01, 0x12, ++0x45, 0xA2, 0xD1, 0x20, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0, 0xA3, ++0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5, 0x82, ++0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D, 0xE0, ++0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90, 0x8B, ++0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80, ++0xC6, 0x7F, 0x01, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29, 0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90, ++0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3, 0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B, ++0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31, 0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01, ++0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5, 0x32, 0xF0, 0x22, 0x22, 0x90, 0x00, ++0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F, ++0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00, ++0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22, 0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90, ++0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74, 0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0, ++0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0, 0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0, ++0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x7D, 0x5B, 0x90, 0x01, ++0xC4, 0xED, 0xF0, 0x74, 0x67, 0xFF, 0xA3, 0xF0, 0x53, 0x91, 0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE, ++0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52, 0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0, ++0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00, 0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D, ++0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5, 0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00, ++0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90, 0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5, ++0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0, 0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90, ++0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06, 0x90, 0x00, 0x56, 0x74, 0x04, 0xF0, ++0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08, 0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0, ++0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, ++0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30, 0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0, ++0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, ++0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, ++0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D, ++0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, ++0x02, 0xC1, 0xCD, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01, ++0x60, 0x02, 0xC1, 0xC5, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, ++0x85, 0xF5, 0x83, 0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x02, 0xC1, ++0xC5, 0xEF, 0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01, ++0xF5, 0x13, 0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, ++0x85, 0xF5, 0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, ++0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, ++0x8A, 0xD6, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82, ++0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F, ++0xA3, 0xF0, 0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, ++0xC3, 0x94, 0x05, 0x40, 0x02, 0x61, 0x1A, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0, ++0x9E, 0x40, 0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90, ++0x8A, 0xD0, 0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE, ++0x74, 0x23, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF, ++0x90, 0x40, 0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8, ++0xF0, 0x90, 0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0, ++0x75, 0x0F, 0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF, ++0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0C, 0x90, 0x8A, ++0xCF, 0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0xB4, 0xC1, 0x5B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, ++0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2, ++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x29, 0xD9, 0xFF, 0x7E, ++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, ++0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, ++0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, ++0x02, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, ++0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, ++0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC, ++0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, ++0x10, 0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, ++0xA9, 0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, ++0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04, ++0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12, ++0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, ++0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, ++0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, ++0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, ++0x9E, 0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC, ++0xA3, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E, ++0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED, ++0x9B, 0xEC, 0x9A, 0x40, 0x04, 0xD1, 0xCE, 0xC1, 0x29, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, ++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3, ++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x02, 0xC1, 0x29, 0x90, 0x8A, ++0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0xB4, 0xC1, 0x29, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, ++0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x02, 0x81, 0xF8, ++0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x19, 0x40, ++0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x11, 0x40, 0x2E, ++0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, ++0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x03, 0x40, ++0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43, 0xF0, 0x90, 0x8A, ++0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xDD, ++0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xC3, 0x94, 0x30, ++0x50, 0x0A, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x81, 0xA3, 0x90, 0x89, 0x43, 0xE0, ++0x64, 0x01, 0x60, 0x02, 0x81, 0x98, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xEE, 0x24, 0x05, ++0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, ++0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, ++0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x16, 0x90, 0x8A, 0xCF, ++0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFF, 0x90, 0x8A, 0xD1, 0xE0, ++0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, ++0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x11, 0xEF, ++0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, ++0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, ++0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, ++0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, ++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, ++0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xCF, ++0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, ++0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, ++0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, ++0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x11, ++0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0xC1, 0x27, 0xEC, 0x64, 0x06, 0x60, 0x02, 0xC1, 0x29, 0x90, ++0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E, 0x00, 0x90, 0x8A, 0xD4, 0xE0, ++0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xDB, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, ++0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xDD, ++0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0xD3, 0x94, 0x04, 0x50, 0x47, ++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4, 0xF5, 0x82, 0x85, 0xF0, 0x83, ++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93, 0xFF, 0x7E, 0x00, 0x12, 0x29, ++0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0xA3, ++0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x50, 0x08, 0x90, ++0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0, 0xC3, 0x13, 0xF0, 0x90, 0x8A, ++0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70, 0x5D, 0x90, 0x8A, 0xDD, 0x04, ++0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A, ++0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, ++0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70, 0x32, 0x90, 0x8A, 0xDA, 0xE0, ++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F, 0xEF, 0x90, 0x8A, 0xDD, 0xB4, ++0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94, ++0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xD3, 0x90, ++0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, 0x8A, ++0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x43, 0xF5, 0x82, ++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x11, 0x02, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, ++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94, 0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F, ++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0, ++0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, ++0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, ++0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, ++0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43, ++0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x01, 0x47, 0x22, 0xAD, 0x07, ++0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, ++0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, ++0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED, ++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, ++0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E, ++0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25, ++0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE, ++0xC3, 0x9F, 0x40, 0x03, 0x02, 0x70, 0x12, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, ++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, ++0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0xD3, 0x9F, 0x40, 0x03, 0x02, 0x70, 0x4C, 0xEE, ++0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, ++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE, ++0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59, ++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, ++0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0, ++0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0, 0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17, ++0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13, 0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A, ++0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90, ++0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x43, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x02, ++0x6F, 0x6E, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74, ++0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, ++0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10, 0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF, ++0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03, 0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0, ++0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, ++0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, ++0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, ++0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66, ++0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, ++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A, ++0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, ++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, ++0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, ++0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, ++0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, ++0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFD, 0x12, 0x5C, 0xC1, 0x90, 0x8A, ++0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, ++0xC3, 0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4, ++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, ++0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x41, 0xCF, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, ++0x00, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12, ++0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F, ++0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0, ++0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, ++0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F, ++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, ++0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, ++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, ++0xF0, 0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F, ++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01, ++0x93, 0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE, ++0xEF, 0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, ++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, ++0x43, 0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, ++0x0C, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F, ++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0, ++0x09, 0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, ++0x34, 0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x21, 0x3E, 0x22, ++0x12, 0x29, 0xD9, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE, ++0x74, 0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20, ++0x0A, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0xF5, ++0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x2A, 0x8B, 0x00, ++0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03, ++0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0, 0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, ++0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30, 0xE0, 0x25, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x10, 0xF0, ++0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90, ++0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B, ++0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, ++0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54, ++0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4, ++0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4, ++0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, ++0x12, 0x29, 0xD9, 0x90, 0x8B, 0x12, 0xF0, 0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2, ++0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7, 0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x29, ++0xD9, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90, 0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, ++0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, ++0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA, ++0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0, ++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90, ++0x8A, 0xDD, 0xF0, 0x12, 0x29, 0xD9, 0xC3, 0x13, 0x20, 0xE0, 0x02, 0xA1, 0x62, 0x90, 0x8A, 0xDA, ++0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD, ++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9, ++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10, ++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54, ++0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0, ++0x20, 0xE0, 0x02, 0xA1, 0x4F, 0x90, 0x8A, 0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43, ++0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x13, 0x13, 0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, ++0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF, 0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0, ++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, ++0x12, 0x36, 0xE6, 0x80, 0x0B, 0xE4, 0x90, 0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75, ++0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, ++0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, ++0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, ++0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07, ++0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, ++0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01, 0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, ++0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F, 0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, ++0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0xC1, 0xA4, 0x90, ++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03, ++0xC1, 0xA4, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90, ++0x8B, 0x2C, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, ++0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, ++0x2C, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, ++0x54, 0x40, 0xFD, 0xEF, 0x54, 0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE, ++0xEF, 0x54, 0xFB, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0x57, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0, ++0x90, 0x8B, 0x2C, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0, ++0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, ++0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, ++0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C, ++0x90, 0x01, 0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8A, 0xDD, 0xE0, ++0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, ++0x0D, 0xA3, 0xE0, 0x64, 0x06, 0x60, 0x2C, 0x7F, 0x06, 0x12, 0x7B, 0x49, 0x80, 0x25, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x06, 0x1B, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, ++0x60, 0x09, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03, ++0x12, 0x66, 0x20, 0x7F, 0x01, 0x80, 0x4D, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, ++0xF0, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80, ++0x1B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, ++0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, ++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0x12, 0x66, 0x13, 0x12, ++0x4A, 0xFC, 0x7F, 0x03, 0xD1, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01, ++0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, ++0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04, ++0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, ++0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x38, ++0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8, ++0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, ++0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, ++0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, ++0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12, ++0x43, 0x94, 0x77, 0x61, 0x00, 0x78, 0xD7, 0x01, 0x77, 0x6C, 0x02, 0x77, 0x6C, 0x03, 0x77, 0x6C, ++0x04, 0x78, 0xD7, 0x05, 0x78, 0xA1, 0x80, 0x78, 0xBA, 0x81, 0x78, 0xD7, 0x82, 0x00, 0x00, 0x78, ++0xD3, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x12, 0x7E, 0x6E, 0x02, 0x78, 0xD7, 0x90, 0x8A, 0xE8, 0xE0, ++0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80, 0x0F, 0xEF, 0x90, 0x8A, 0xE5, ++0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0, 0xC3, 0x90, 0x8A, 0xE9, 0xE0, ++0x94, 0x08, 0x50, 0x79, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE5, 0xE0, 0xFF, 0x90, 0x8A, ++0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x03, 0x02, 0x78, 0xD7, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, ++0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE, 0x2F, 0xFF, 0xEE, 0xFD, ++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A, ++0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0xFB, 0x80, 0x2B, 0xFF, 0xFD, 0xC3, 0x74, 0x03, 0x9D, ++0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0, ++0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9, 0xE0, 0x34, 0x00, 0x8D, ++0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80, 0x8C, 0xC3, 0x90, 0x8A, ++0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x01, 0xD7, 0x90, 0x8A, 0xE8, 0xE0, 0x64, 0x04, 0x60, 0x02, ++0x01, 0xD7, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x10, 0x12, 0x2A, 0x6C, ++0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, ++0xFE, 0x78, 0x18, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0x12, 0x43, ++0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED, 0xE0, 0xFF, 0xE4, 0xFC, ++0xFD, 0xFE, 0x78, 0x08, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0x12, ++0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, ++0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xEF, 0x12, 0x43, 0x53, 0x90, 0x80, ++0x85, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x12, 0x2F, 0xD9, 0x80, ++0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, ++0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x37, 0x54, 0x80, 0x1D, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, ++0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x36, ++0xCB, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, ++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74, 0x04, 0xF0, 0xA3, 0xE4, ++0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x12, ++0x29, 0xD9, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0, 0x30, 0xE0, 0x0B, 0x90, ++0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xDB, 0xF0, 0xA3, ++0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x24, ++0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D, 0xFF, 0x24, 0x01, 0xF5, ++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74, 0x02, 0x2F, 0xF5, 0x82, ++0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5, 0x82, 0xE4, 0x34, 0xFC, ++0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, ++0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3, 0xE0, 0x2F, 0xFF, 0x90, ++0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFF, ++0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, ++0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x12, 0x76, 0xF2, 0xEF, 0x70, 0x45, 0x90, 0x01, 0xC3, 0xE0, ++0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0, 0x94, 0x03, 0x40, ++0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2, 0xE4, 0x75, 0xF0, ++0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80, 0xCF, 0x90, 0x01, 0xC6, ++0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74, 0xFF, 0xF0, 0x80, ++0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, ++0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB, 0x70, 0x05, 0xF0, ++0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, ++0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0, 0x90, 0x8A, 0xDE, ++0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02, 0xA3, 0xE0, 0x60, ++0x02, 0x21, 0x32, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x05, 0xF0, 0x90, ++0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61, 0x22, 0x51, 0x67, ++0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x7F, 0x78, 0x7E, ++0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x1C, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x27, ++0xDE, 0x90, 0x8B, 0x20, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B, ++0x24, 0x12, 0x2A, 0x7F, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01, 0x0D, 0x12, 0x43, ++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43, 0x53, 0xEF, 0x54, ++0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9, ++0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, ++0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0xEF, 0x44, ++0x02, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x2F, 0xD9, ++0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x28, 0x12, 0x2A, 0x7F, 0x90, 0x80, 0x85, ++0x12, 0x2A, 0x8B, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80, ++0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B, ++0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4, ++0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81, 0x22, 0x51, 0x6D, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, ++0x51, 0x67, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, ++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70, 0x02, 0xA1, 0x15, 0xEF, 0x12, 0x43, 0x94, 0x7B, 0x77, ++0x00, 0x7B, 0xB1, 0x01, 0x7B, 0xF7, 0x02, 0x7C, 0x31, 0x03, 0x7C, 0x69, 0x04, 0x7C, 0xA2, 0x05, ++0x7C, 0xDD, 0x06, 0x00, 0x00, 0x7D, 0x15, 0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0xA1, ++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4, 0x05, 0x04, 0xB1, 0x24, 0xA1, 0x15, 0xEF, 0xB4, 0x06, ++0x06, 0x7F, 0x01, 0xB1, 0x39, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01, ++0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xB1, 0x2E, 0xB1, 0x6B, 0xA1, ++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0xA1, ++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xB1, 0x39, 0xA1, 0x15, 0xEE, ++0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60, ++0x02, 0xA1, 0x15, 0xB1, 0x2E, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, ++0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, ++0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, ++0x01, 0xB1, 0x39, 0x80, 0x08, 0xEE, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0xB1, 0x1A, 0xB1, 0x8D, 0xA1, ++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80, ++0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x06, 0xEE, ++0xB4, 0x02, 0x02, 0xB1, 0x2E, 0xB1, 0x76, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, ++0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0x80, ++0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xB1, 0x2E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, ++0x04, 0xB1, 0x6B, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x71, 0x40, ++0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x13, ++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, ++0x02, 0xB1, 0x2E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xB1, 0x6B, 0x80, 0x0B, 0x90, 0x8B, ++0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01, 0xB1, 0x48, 0xB1, 0x80, 0x80, 0x38, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, ++0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80, 0x16, 0x90, 0x8B, 0x2D, ++0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, ++0x02, 0xB1, 0x2E, 0xB1, 0x9A, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D, ++0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05, ++0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04, 0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, ++0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x4F, 0xED, ++0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, ++0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C, ++0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x22, ++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22, 0x90, 0x05, 0x22, ++0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0, ++0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, ++0x74, 0x04, 0xF0, 0x22, 0x12, 0x4F, 0xED, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, 0x01, ++0x57, 0xE0, 0x60, 0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, ++0x8B, 0x1B, 0xE0, 0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0, ++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, ++0x40, 0x0E, 0xE5, 0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0, ++0x90, 0x01, 0x5B, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, ++0xF0, 0xE4, 0x90, 0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4, ++0xF0, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B, ++0x4F, 0xF0, 0xA3, 0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0, ++0x70, 0x07, 0xA3, 0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8, ++0x90, 0x8B, 0x4F, 0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12, ++0x37, 0x54, 0x90, 0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x8F, 0x0F, ++0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3, 0xE0, 0xFF, 0xC3, 0x9E, ++0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE5, ++0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE5, 0x0F, 0xF0, 0x90, ++0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90, ++0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02, 0x34, 0xB7, 0xDC, 0xD3, ++}; ++#endif ++ ++//8188C_Formal_All_PHYforMP_111117 2011-11-23 ++//8192C_Formal_92CU_PHYforMP_110817 2011-11-23 ++ ++u32 Rtl8192CUPHY_REG_2TArray[PHY_REG_2TArrayLength] = { ++0x024,0x0011800f, ++0x028,0x00ffdb83, ++0x800,0x80040002, ++0x804,0x00000003, ++0x808,0x0000fc00, ++0x80c,0x0000000a, ++0x810,0x10000330, //for Broadcom AP IOT ++0x814,0x020c3d10, ++0x818,0x02200385, ++0x81c,0x00000000, ++0x820,0x01000100, ++0x824,0x00390004, ++0x828,0x01000100, ++0x82c,0x00390004, ++0x830,0x27272727, ++0x834,0x27272727, ++0x838,0x27272727, ++0x83c,0x27272727, ++0x840,0x00010000, ++0x844,0x00010000, ++0x848,0x27272727, ++0x84c,0x27272727, ++0x850,0x00000000, ++0x854,0x00000000, ++0x858,0x569a569a, ++0x85c,0x0c1b25a4, ++0x860,0x66e60230, ++0x864,0x061f0130, ++0x868,0x27272727, ++0x86c,0x2b2b2b27, ++0x870,0x07000700, ++0x874,0x22184000, ++0x878,0x08080808, ++0x87c,0x00000000, ++0x880,0xc0083070, ++0x884,0x000004d5, ++0x888,0x00000000, ++0x88c,0xcc0000c0, ++0x890,0x00000800, ++0x894,0xfffffffe, ++0x898,0x40302010, ++0x89c,0x00706050, ++0x900,0x00000000, ++0x904,0x00000023, ++0x908,0x00000000, ++0x90c,0x81121313, ++0xa00,0x00d047c8, ++0xa04,0x80ff000c, ++0xa08,0x8c838300, ++0xa0c,0x2e68120f, ++0xa10,0x9500bb78, ++0xa14,0x11144028, ++0xa18,0x00881117, ++0xa1c,0x89140f00, ++0xa20,0x1a1b0000, ++0xa24,0x090e1317, ++0xa28,0x00000204, ++0xa2c,0x00d30000, ++0xa70,0x101fbf00, ++0xa74,0x00000007, ++0xc00,0x48071d40, ++0xc04,0x03a05633, ++0xc08,0x000000e4, ++0xc0c,0x6c6c6c6c, ++0xc10,0x08800000, ++0xc14,0x40000100, ++0xc18,0x08800000, ++0xc1c,0x40000100, ++0xc20,0x00000000, ++0xc24,0x00000000, ++0xc28,0x00000000, ++0xc2c,0x00000000, ++0xc30,0x69e9ac44, ++0xc34,0x469652cf, ++0xc38,0x49795994, ++0xc3c,0x0a97971c, ++0xc40,0x1f7c403f, ++0xc44,0x000100b7, ++0xc48,0xec020107, ++0xc4c,0x007f037f, ++0xc50,0x69543420, ++0xc54,0x43bc0094, ++0xc58,0x69543420, ++0xc5c,0x433c0094, ++0xc60,0x00000000, ++0xc64,0x5116848b, ++0xc68,0x47c00bff, ++0xc6c,0x00000036, ++0xc70,0x2c7f000d, ++0xc74,0x2186115b, ++0xc78,0x0000001f, ++0xc7c,0x00b99612, ++0xc80,0x40000100, ++0xc84,0x20f60000, ++0xc88,0x40000100, ++0xc8c,0xa0e40000, ++0xc90,0x00121820, ++0xc94,0x00000000, ++0xc98,0x00121820, ++0xc9c,0x00007f7f, ++0xca0,0x00000000, ++0xca4,0x00000080, ++0xca8,0x00000000, ++0xcac,0x00000000, ++0xcb0,0x00000000, ++0xcb4,0x00000000, ++0xcb8,0x00000000, ++0xcbc,0x28000000, ++0xcc0,0x00000000, ++0xcc4,0x00000000, ++0xcc8,0x00000000, ++0xccc,0x00000000, ++0xcd0,0x00000000, ++0xcd4,0x00000000, ++0xcd8,0x64b22427, ++0xcdc,0x00766932, ++0xce0,0x00222222, ++0xce4,0x00000000, ++0xce8,0x37644302, ++0xcec,0x2f97d40c, ++0xd00,0x00080740, ++0xd04,0x00020403, ++0xd08,0x0000907f, ++0xd0c,0x20010201, ++0xd10,0xa0633333, ++0xd14,0x3333bc43, ++0xd18,0x7a8f5b6b, ++0xd2c,0xcc979975, ++0xd30,0x00000000, ++0xd34,0x80608000, ++0xd38,0x00000000, ++0xd3c,0x00027293, ++0xd40,0x00000000, ++0xd44,0x00000000, ++0xd48,0x00000000, ++0xd4c,0x00000000, ++0xd50,0x6437140a, ++0xd54,0x00000000, ++0xd58,0x00000000, ++0xd5c,0x30032064, ++0xd60,0x4653de68, ++0xd64,0x04518a3c, ++0xd68,0x00002101, ++0xd6c,0x2a201c16, ++0xd70,0x1812362e, ++0xd74,0x322c2220, ++0xd78,0x000e3c24, ++0xe00,0x2a2a2a2a, ++0xe04,0x2a2a2a2a, ++0xe08,0x03902a2a, ++0xe10,0x2a2a2a2a, ++0xe14,0x2a2a2a2a, ++0xe18,0x2a2a2a2a, ++0xe1c,0x2a2a2a2a, ++0xe28,0x00000000, ++0xe30,0x1000dc1f, ++0xe34,0x10008c1f, ++0xe38,0x02140102, ++0xe3c,0x681604c2, ++0xe40,0x01007c00, ++0xe44,0x01004800, ++0xe48,0xfb000000, ++0xe4c,0x000028d1, ++0xe50,0x1000dc1f, ++0xe54,0x10008c1f, ++0xe58,0x02140102, ++0xe5c,0x28160d05, ++0xe60,0x00000010, ++0xe68,0x001b25a4, ++0xe6c,0x63db25a4, ++0xe70,0x63db25a4, ++0xe74,0x0c1b25a4, ++0xe78,0x0c1b25a4, ++0xe7c,0x0c1b25a4, ++0xe80,0x0c1b25a4, ++0xe84,0x63db25a4, ++0xe88,0x0c1b25a4, ++0xe8c,0x63db25a4, ++0xed0,0x63db25a4, ++0xed4,0x63db25a4, ++0xed8,0x63db25a4, ++0xedc,0x001b25a4, ++0xee0,0x001b25a4, ++0xeec,0x6fdb25a4, ++0xf14,0x00000003, ++0xf4c,0x00000000, ++0xf00,0x00000300, ++}; ++ ++u32 Rtl8192CUPHY_REG_1TArray[PHY_REG_1TArrayLength] = { ++0x024,0x0011800f, ++0x028,0x00ffdb83, ++0x800,0x80040000, ++0x804,0x00000001, ++0x808,0x0000fc00, ++0x80c,0x0000000a, ++0x810,0x10000330, //for Broadcom AP IOT ++0x814,0x020c3d10, ++0x818,0x02200385, ++0x81c,0x00000000, ++0x820,0x01000100, ++0x824,0x00390004, ++0x828,0x00000000, ++0x82c,0x00000000, ++0x830,0x00000000, ++0x834,0x00000000, ++0x838,0x00000000, ++0x83c,0x00000000, ++0x840,0x00010000, ++0x844,0x00000000, ++0x848,0x00000000, ++0x84c,0x00000000, ++0x850,0x00000000, ++0x854,0x00000000, ++0x858,0x569a569a, ++0x85c,0x001b25a4, ++0x860,0x66e60230, ++0x864,0x061f0130, ++0x868,0x00000000, ++0x86c,0x32323200, ++0x870,0x07000700, ++0x874,0x22004000, ++0x878,0x00000808, ++0x87c,0x00000000, ++0x880,0xc0083070, ++0x884,0x000004d5, ++0x888,0x00000000, ++0x88c,0xccc000c0, ++0x890,0x00000800, ++0x894,0xfffffffe, ++0x898,0x40302010, ++0x89c,0x00706050, ++0x900,0x00000000, ++0x904,0x00000023, ++0x908,0x00000000, ++0x90c,0x81121111, ++0xa00,0x00d047c8, ++0xa04,0x80ff000c, ++0xa08,0x8c838300, ++0xa0c,0x2e68120f, ++0xa10,0x9500bb78, ++0xa14,0x11144028, ++0xa18,0x00881117, ++0xa1c,0x89140f00, ++0xa20,0x1a1b0000, ++0xa24,0x090e1317, ++0xa28,0x00000204, ++0xa2c,0x00d30000, ++0xa70,0x101fbf00, ++0xa74,0x00000007, ++0xc00,0x48071d40, ++0xc04,0x03a05611, ++0xc08,0x000000e4, ++0xc0c,0x6c6c6c6c, ++0xc10,0x08800000, ++0xc14,0x40000100, ++0xc18,0x08800000, ++0xc1c,0x40000100, ++0xc20,0x00000000, ++0xc24,0x00000000, ++0xc28,0x00000000, ++0xc2c,0x00000000, ++0xc30,0x69e9ac44, ++0xc34,0x469652cf, ++0xc38,0x49795994, ++0xc3c,0x0a97971c, ++0xc40,0x1f7c403f, ++0xc44,0x000100b7, ++0xc48,0xec020107, ++0xc4c,0x007f037f, ++0xc50,0x69543420, ++0xc54,0x43bc0094, ++0xc58,0x69543420, ++0xc5c,0x433c0094, ++0xc60,0x00000000, ++0xc64,0x5116848b, ++0xc68,0x47c00bff, ++0xc6c,0x00000036, ++0xc70,0x2c7f000d, ++0xc74,0x018610db, ++0xc78,0x0000001f, ++0xc7c,0x00b91612, ++0xc80,0x40000100, ++0xc84,0x20f60000, ++0xc88,0x40000100, ++0xc8c,0x20200000, ++0xc90,0x00121820, ++0xc94,0x00000000, ++0xc98,0x00121820, ++0xc9c,0x00007f7f, ++0xca0,0x00000000, ++0xca4,0x00000080, ++0xca8,0x00000000, ++0xcac,0x00000000, ++0xcb0,0x00000000, ++0xcb4,0x00000000, ++0xcb8,0x00000000, ++0xcbc,0x28000000, ++0xcc0,0x00000000, ++0xcc4,0x00000000, ++0xcc8,0x00000000, ++0xccc,0x00000000, ++0xcd0,0x00000000, ++0xcd4,0x00000000, ++0xcd8,0x64b22427, ++0xcdc,0x00766932, ++0xce0,0x00222222, ++0xce4,0x00000000, ++0xce8,0x37644302, ++0xcec,0x2f97d40c, ++0xd00,0x00000740, ++0xd04,0x00020401, ++0xd08,0x0000907f, ++0xd0c,0x20010201, ++0xd10,0xa0633333, ++0xd14,0x3333bc43, ++0xd18,0x7a8f5b6b, ++0xd2c,0xcc979975, ++0xd30,0x00000000, ++0xd34,0x80608000, ++0xd38,0x00000000, ++0xd3c,0x00027293, ++0xd40,0x00000000, ++0xd44,0x00000000, ++0xd48,0x00000000, ++0xd4c,0x00000000, ++0xd50,0x6437140a, ++0xd54,0x00000000, ++0xd58,0x00000000, ++0xd5c,0x30032064, ++0xd60,0x4653de68, ++0xd64,0x04518a3c, ++0xd68,0x00002101, ++0xd6c,0x2a201c16, ++0xd70,0x1812362e, ++0xd74,0x322c2220, ++0xd78,0x000e3c24, ++0xe00,0x2a2a2a2a, ++0xe04,0x2a2a2a2a, ++0xe08,0x03902a2a, ++0xe10,0x2a2a2a2a, ++0xe14,0x2a2a2a2a, ++0xe18,0x2a2a2a2a, ++0xe1c,0x2a2a2a2a, ++0xe28,0x00000000, ++0xe30,0x1000dc1f, ++0xe34,0x10008c1f, ++0xe38,0x02140102, ++0xe3c,0x681604c2, ++0xe40,0x01007c00, ++0xe44,0x01004800, ++0xe48,0xfb000000, ++0xe4c,0x000028d1, ++0xe50,0x1000dc1f, ++0xe54,0x10008c1f, ++0xe58,0x02140102, ++0xe5c,0x28160d05, ++0xe60,0x00000008, ++0xe68,0x001b25a4, ++0xe6c,0x631b25a0, ++0xe70,0x631b25a0, ++0xe74,0x081b25a0, ++0xe78,0x081b25a0, ++0xe7c,0x081b25a0, ++0xe80,0x081b25a0, ++0xe84,0x631b25a0, ++0xe88,0x081b25a0, ++0xe8c,0x631b25a0, ++0xed0,0x631b25a0, ++0xed4,0x631b25a0, ++0xed8,0x631b25a0, ++0xedc,0x001b25a0, ++0xee0,0x001b25a0, ++0xeec,0x6b1b25a0, ++0xf14,0x00000003, ++0xf4c,0x00000000, ++0xf00,0x00000300, ++}; ++ ++u32 Rtl8192CUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength] = { ++0x0, }; ++ ++u32 Rtl8192CUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength] = { ++0x0, }; ++ ++u32 Rtl8192CUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength] = { ++0x0, }; ++ ++u32 Rtl8192CUPHY_REG_Array_PG[PHY_REG_Array_PGLength] = { ++0xe00,0xffffffff,0x07090c0c, ++0xe04,0xffffffff,0x01020405, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x0b0c0c0e, ++0xe14,0xffffffff,0x01030506, ++0xe18,0xffffffff,0x0b0c0d0e, ++0xe1c,0xffffffff,0x01030509, ++0x830,0xffffffff,0x07090c0c, ++0x834,0xffffffff,0x01020405, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x0b0c0d0e, ++0x848,0xffffffff,0x01030509, ++0x84c,0xffffffff,0x0b0c0d0e, ++0x868,0xffffffff,0x01030509, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x04040404, ++0xe04,0xffffffff,0x00020204, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x06060606, ++0xe14,0xffffffff,0x00020406, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x04040404, ++0x834,0xffffffff,0x00020204, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x06060606, ++0x848,0xffffffff,0x00020406, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x04040404, ++0xe04,0xffffffff,0x00020204, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x04040404, ++0x834,0xffffffff,0x00020204, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++}; ++ ++u32 Rtl8192CUPHY_REG_Array_PG_mCard[PHY_REG_Array_PG_mCardLength] = { ++0xe00,0xffffffff,0x0a0c0c0c, ++0xe04,0xffffffff,0x02040608, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x0a0c0d0e, ++0xe14,0xffffffff,0x02040608, ++0xe18,0xffffffff,0x0a0c0d0e, ++0xe1c,0xffffffff,0x02040608, ++0x830,0xffffffff,0x0a0c0c0c, ++0x834,0xffffffff,0x02040608, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x0a0c0d0e, ++0x848,0xffffffff,0x02040608, ++0x84c,0xffffffff,0x0a0c0d0e, ++0x868,0xffffffff,0x02040608, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x04040404, ++0xe04,0xffffffff,0x00020204, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x06060606, ++0xe14,0xffffffff,0x00020406, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x04040404, ++0x834,0xffffffff,0x00020204, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x06060606, ++0x848,0xffffffff,0x00020406, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x04040404, ++0xe04,0xffffffff,0x00020204, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x04040404, ++0x834,0xffffffff,0x00020204, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++}; ++ ++u32 Rtl8192CUPHY_REG_Array_MP[PHY_REG_Array_MPLength] = { ++0xc30,0x69e9ac4a, ++0xc3c,0x0a979718, ++}; ++ ++u32 Rtl8192CUPHY_REG_1T_HPArray[PHY_REG_1T_HPArrayLength] = { ++0x024,0x0011800f, ++0x028,0x00ffdb83, ++0x040,0x000c0004, ++0x800,0x80040000, ++0x804,0x00000001, ++0x808,0x0000fc00, ++0x80c,0x0000000a, ++0x810,0x10000330, //for Broadcom AP IOT ++0x814,0x020c3d10, ++0x818,0x02200385, ++0x81c,0x00000000, ++0x820,0x01000100, ++0x824,0x00390204, ++0x828,0x00000000, ++0x82c,0x00000000, ++0x830,0x00000000, ++0x834,0x00000000, ++0x838,0x00000000, ++0x83c,0x00000000, ++0x840,0x00010000, ++0x844,0x00000000, ++0x848,0x00000000, ++0x84c,0x00000000, ++0x850,0x00000000, ++0x854,0x00000000, ++0x858,0x569a569a, ++0x85c,0x001b25a4, ++0x860,0x66e60230, ++0x864,0x061f0130, ++0x868,0x00000000, ++0x86c,0x20202000, ++0x870,0x03000300, ++0x874,0x22004000, ++0x878,0x00000808, ++0x87c,0x00ffc3f1, ++0x880,0xc0083070, ++0x884,0x000004d5, ++0x888,0x00000000, ++0x88c,0xccc000c0, ++0x890,0x00000800, ++0x894,0xfffffffe, ++0x898,0x40302010, ++0x89c,0x00706050, ++0x900,0x00000000, ++0x904,0x00000023, ++0x908,0x00000000, ++0x90c,0x81121111, ++0xa00,0x00d047c8, ++0xa04,0x80ff000c, ++0xa08,0x8c838300, ++0xa0c,0x2e68120f, ++0xa10,0x9500bb78, ++0xa14,0x11144028, ++0xa18,0x00881117, ++0xa1c,0x89140f00, ++0xa20,0x15160000, ++0xa24,0x070b0f12, ++0xa28,0x00000104, ++0xa2c,0x00d30000, ++0xa70,0x101fbf00, ++0xa74,0x00000007, ++0xc00,0x48071d40, ++0xc04,0x03a05611, ++0xc08,0x000000e4, ++0xc0c,0x6c6c6c6c, ++0xc10,0x08800000, ++0xc14,0x40000100, ++0xc18,0x08800000, ++0xc1c,0x40000100, ++0xc20,0x00000000, ++0xc24,0x00000000, ++0xc28,0x00000000, ++0xc2c,0x00000000, ++0xc30,0x69e9ac44, ++0xc34,0x469652cf, ++0xc38,0x49795994, ++0xc3c,0x0a97971c, ++0xc40,0x1f7c403f, ++0xc44,0x000100b7, ++0xc48,0xec020107, ++0xc4c,0x007f037f, ++0xc50,0x6954342e, ++0xc54,0x43bc0094, ++0xc58,0x6954342f, ++0xc5c,0x433c0094, ++0xc60,0x00000000, ++0xc64,0x5116848b, ++0xc68,0x47c00bff, ++0xc6c,0x00000036, ++0xc70,0x2c46000d, ++0xc74,0x018610db, ++0xc78,0x0000001f, ++0xc7c,0x00b91612, ++0xc80,0x24000090, ++0xc84,0x20f60000, ++0xc88,0x24000090, ++0xc8c,0x20200000, ++0xc90,0x00121820, ++0xc94,0x00000000, ++0xc98,0x00121820, ++0xc9c,0x00007f7f, ++0xca0,0x00000000, ++0xca4,0x00000080, ++0xca8,0x00000000, ++0xcac,0x00000000, ++0xcb0,0x00000000, ++0xcb4,0x00000000, ++0xcb8,0x00000000, ++0xcbc,0x28000000, ++0xcc0,0x00000000, ++0xcc4,0x00000000, ++0xcc8,0x00000000, ++0xccc,0x00000000, ++0xcd0,0x00000000, ++0xcd4,0x00000000, ++0xcd8,0x64b22427, ++0xcdc,0x00766932, ++0xce0,0x00222222, ++0xce4,0x00000000, ++0xce8,0x37644302, ++0xcec,0x2f97d40c, ++0xd00,0x00000740, ++0xd04,0x00020401, ++0xd08,0x0000907f, ++0xd0c,0x20010201, ++0xd10,0xa0633333, ++0xd14,0x3333bc43, ++0xd18,0x7a8f5b6b, ++0xd2c,0xcc979975, ++0xd30,0x00000000, ++0xd34,0x80608000, ++0xd38,0x00000000, ++0xd3c,0x00027293, ++0xd40,0x00000000, ++0xd44,0x00000000, ++0xd48,0x00000000, ++0xd4c,0x00000000, ++0xd50,0x6437140a, ++0xd54,0x00000000, ++0xd58,0x00000000, ++0xd5c,0x30032064, ++0xd60,0x4653de68, ++0xd64,0x04518a3c, ++0xd68,0x00002101, ++0xd6c,0x2a201c16, ++0xd70,0x1812362e, ++0xd74,0x322c2220, ++0xd78,0x000e3c24, ++0xe00,0x24242424, ++0xe04,0x24242424, ++0xe08,0x03902024, ++0xe10,0x24242424, ++0xe14,0x24242424, ++0xe18,0x24242424, ++0xe1c,0x24242424, ++0xe28,0x00000000, ++0xe30,0x1000dc1f, ++0xe34,0x10008c1f, ++0xe38,0x02140102, ++0xe3c,0x681604c2, ++0xe40,0x01007c00, ++0xe44,0x01004800, ++0xe48,0xfb000000, ++0xe4c,0x000028d1, ++0xe50,0x1000dc1f, ++0xe54,0x10008c1f, ++0xe58,0x02140102, ++0xe5c,0x28160d05, ++0xe60,0x00000008, ++0xe68,0x001b25a4, ++0xe6c,0x631b25a0, ++0xe70,0x631b25a0, ++0xe74,0x081b25a0, ++0xe78,0x081b25a0, ++0xe7c,0x081b25a0, ++0xe80,0x081b25a0, ++0xe84,0x631b25a0, ++0xe88,0x081b25a0, ++0xe8c,0x631b25a0, ++0xed0,0x631b25a0, ++0xed4,0x631b25a0, ++0xed8,0x631b25a0, ++0xedc,0x001b25a0, ++0xee0,0x001b25a0, ++0xeec,0x6b1b25a0, ++0xee8,0x31555448, ++0xf14,0x00000003, ++0xf4c,0x00000000, ++0xf00,0x00000300, ++}; ++ ++u32 Rtl8192CUPHY_REG_1T_mCardArray[PHY_REG_1T_mCardArrayLength] = { ++0x024,0x0011800d, ++0x028,0x00ffdb83, ++0x800,0x80040000, ++0x804,0x00000001, ++0x808,0x0000fc00, ++0x80c,0x0000000a, ++0x810,0x10000330, //for Broadcom AP IOT ++0x814,0x020c3d10, ++0x818,0x02200385, ++0x81c,0x00000000, ++0x820,0x01000100, ++0x824,0x00390004, ++0x828,0x00000000, ++0x82c,0x00000000, ++0x830,0x00000000, ++0x834,0x00000000, ++0x838,0x00000000, ++0x83c,0x00000000, ++0x840,0x00010000, ++0x844,0x00000000, ++0x848,0x00000000, ++0x84c,0x00000000, ++0x850,0x00000000, ++0x854,0x00000000, ++0x858,0x569a569a, ++0x85c,0x001b25a4, ++0x860,0x66e60230, ++0x864,0x061f0130, ++0x868,0x00000000, ++0x86c,0x32323200, ++0x870,0x07000700, ++0x874,0x22004000, ++0x878,0x00000808, ++0x87c,0x00000000, ++0x880,0xc0083070, ++0x884,0x000004d5, ++0x888,0x00000000, ++0x88c,0xccc000c0, ++0x890,0x00000800, ++0x894,0xfffffffe, ++0x898,0x40302010, ++0x89c,0x00706050, ++0x900,0x00000000, ++0x904,0x00000023, ++0x908,0x00000000, ++0x90c,0x81121111, ++0xa00,0x00d047c8, ++0xa04,0x80ff000c, ++0xa08,0x8c838300, ++0xa0c,0x2e68120f, ++0xa10,0x9500bb78, ++0xa14,0x11144028, ++0xa18,0x00881117, ++0xa1c,0x89140f00, ++0xa20,0x1a1b0000, ++0xa24,0x090e1317, ++0xa28,0x00000204, ++0xa2c,0x00d30000, ++0xa70,0x101fbf00, ++0xa74,0x00000007, ++0xc00,0x48071d40, ++0xc04,0x03a05611, ++0xc08,0x000000e4, ++0xc0c,0x6c6c6c6c, ++0xc10,0x08800000, ++0xc14,0x40000100, ++0xc18,0x08800000, ++0xc1c,0x40000100, ++0xc20,0x00000000, ++0xc24,0x00000000, ++0xc28,0x00000000, ++0xc2c,0x00000000, ++0xc30,0x69e9ac44, ++0xc34,0x469652cf, ++0xc38,0x49795994, ++0xc3c,0x0a97971c, ++0xc40,0x1f7c403f, ++0xc44,0x000100b7, ++0xc48,0xec020107, ++0xc4c,0x007f037f, ++0xc50,0x69543420, ++0xc54,0x43bc0094, ++0xc58,0x69543420, ++0xc5c,0x433c0094, ++0xc60,0x00000000, ++0xc64,0x5116848b, ++0xc68,0x47c00bff, ++0xc6c,0x00000036, ++0xc70,0x2c7f000d, ++0xc74,0x018610db, ++0xc78,0x0000001f, ++0xc7c,0x00b91612, ++0xc80,0x40000100, ++0xc84,0x20f60000, ++0xc88,0x40000100, ++0xc8c,0x20200000, ++0xc90,0x00121820, ++0xc94,0x00000000, ++0xc98,0x00121820, ++0xc9c,0x00007f7f, ++0xca0,0x00000000, ++0xca4,0x00000080, ++0xca8,0x00000000, ++0xcac,0x00000000, ++0xcb0,0x00000000, ++0xcb4,0x00000000, ++0xcb8,0x00000000, ++0xcbc,0x28000000, ++0xcc0,0x00000000, ++0xcc4,0x00000000, ++0xcc8,0x00000000, ++0xccc,0x00000000, ++0xcd0,0x00000000, ++0xcd4,0x00000000, ++0xcd8,0x64b22427, ++0xcdc,0x00766932, ++0xce0,0x00222222, ++0xce4,0x00000000, ++0xce8,0x37644302, ++0xcec,0x2f97d40c, ++0xd00,0x00000740, ++0xd04,0x00020401, ++0xd08,0x0000907f, ++0xd0c,0x20010201, ++0xd10,0xa0633333, ++0xd14,0x3333bc43, ++0xd18,0x7a8f5b6b, ++0xd2c,0xcc979975, ++0xd30,0x00000000, ++0xd34,0x80608000, ++0xd38,0x00000000, ++0xd3c,0x00027293, ++0xd40,0x00000000, ++0xd44,0x00000000, ++0xd48,0x00000000, ++0xd4c,0x00000000, ++0xd50,0x6437140a, ++0xd54,0x00000000, ++0xd58,0x00000000, ++0xd5c,0x30032064, ++0xd60,0x4653de68, ++0xd64,0x04518a3c, ++0xd68,0x00002101, ++0xd6c,0x2a201c16, ++0xd70,0x1812362e, ++0xd74,0x322c2220, ++0xd78,0x000e3c24, ++0xe00,0x2a2a2a2a, ++0xe04,0x2a2a2a2a, ++0xe08,0x03902a2a, ++0xe10,0x2a2a2a2a, ++0xe14,0x2a2a2a2a, ++0xe18,0x2a2a2a2a, ++0xe1c,0x2a2a2a2a, ++0xe28,0x00000000, ++0xe30,0x1000dc1f, ++0xe34,0x10008c1f, ++0xe38,0x02140102, ++0xe3c,0x681604c2, ++0xe40,0x01007c00, ++0xe44,0x01004800, ++0xe48,0xfb000000, ++0xe4c,0x000028d1, ++0xe50,0x1000dc1f, ++0xe54,0x10008c1f, ++0xe58,0x02140102, ++0xe5c,0x28160d05, ++0xe60,0x00000008, ++0xe68,0x001b25a4, ++0xe6c,0x631b25a0, ++0xe70,0x631b25a0, ++0xe74,0x081b25a0, ++0xe78,0x081b25a0, ++0xe7c,0x081b25a0, ++0xe80,0x081b25a0, ++0xe84,0x631b25a0, ++0xe88,0x081b25a0, ++0xe8c,0x631b25a0, ++0xed0,0x631b25a0, ++0xed4,0x631b25a0, ++0xed8,0x631b25a0, ++0xedc,0x001b25a0, ++0xee0,0x001b25a0, ++0xeec,0x6b1b25a0, ++0xf14,0x00000003, ++0xf4c,0x00000000, ++0xf00,0x00000300, ++}; ++ ++u32 Rtl8192CUPHY_REG_2T_mCardArray[PHY_REG_2T_mCardArrayLength] = { ++0x024,0x0011800d, ++0x028,0x00ffdb83, ++0x800,0x80040002, ++0x804,0x00000003, ++0x808,0x0000fc00, ++0x80c,0x0000000a, ++0x810,0x10000330, //for Broadcom AP IOT ++0x814,0x020c3d10, ++0x818,0x02200385, ++0x81c,0x00000000, ++0x820,0x01000100, ++0x824,0x00390004, ++0x828,0x01000100, ++0x82c,0x00390004, ++0x830,0x27272727, ++0x834,0x27272727, ++0x838,0x27272727, ++0x83c,0x27272727, ++0x840,0x00010000, ++0x844,0x00010000, ++0x848,0x27272727, ++0x84c,0x27272727, ++0x850,0x00000000, ++0x854,0x00000000, ++0x858,0x569a569a, ++0x85c,0x0c1b25a4, ++0x860,0x66e60230, ++0x864,0x061f0130, ++0x868,0x27272727, ++0x86c,0x2b2b2b27, ++0x870,0x07000700, ++0x874,0x22184000, ++0x878,0x08080808, ++0x87c,0x00000000, ++0x880,0xc0083070, ++0x884,0x000004d5, ++0x888,0x00000000, ++0x88c,0xcc0000c0, ++0x890,0x00000800, ++0x894,0xfffffffe, ++0x898,0x40302010, ++0x89c,0x00706050, ++0x900,0x00000000, ++0x904,0x00000023, ++0x908,0x00000000, ++0x90c,0x81121313, ++0xa00,0x00d047c8, ++0xa04,0x80ff000c, ++0xa08,0x8c838300, ++0xa0c,0x2e68120f, ++0xa10,0x9500bb78, ++0xa14,0x11144028, ++0xa18,0x00881117, ++0xa1c,0x89140f00, ++0xa20,0x1a1b0000, ++0xa24,0x090e1317, ++0xa28,0x00000204, ++0xa2c,0x00d30000, ++0xa70,0x101fbf00, ++0xa74,0x00000007, ++0xc00,0x48071d40, ++0xc04,0x03a05633, ++0xc08,0x000000e4, ++0xc0c,0x6c6c6c6c, ++0xc10,0x08800000, ++0xc14,0x40000100, ++0xc18,0x08800000, ++0xc1c,0x40000100, ++0xc20,0x00000000, ++0xc24,0x00000000, ++0xc28,0x00000000, ++0xc2c,0x00000000, ++0xc30,0x69e9ac44, ++0xc34,0x469652cf, ++0xc38,0x49795994, ++0xc3c,0x0a97971c, ++0xc40,0x1f7c403f, ++0xc44,0x000100b7, ++0xc48,0xec020107, ++0xc4c,0x007f037f, ++0xc50,0x69543420, ++0xc54,0x43bc0094, ++0xc58,0x69543420, ++0xc5c,0x433c0094, ++0xc60,0x00000000, ++0xc64,0x5116848b, ++0xc68,0x47c00bff, ++0xc6c,0x00000036, ++0xc70,0x2c7f000d, ++0xc74,0x218610db, ++0xc78,0x0000001f, ++0xc7c,0x00b91612, ++0xc80,0x40000100, ++0xc84,0x20f60000, ++0xc88,0x40000100, ++0xc8c,0xa0e40000, ++0xc90,0x00121820, ++0xc94,0x00000000, ++0xc98,0x00121820, ++0xc9c,0x00007f7f, ++0xca0,0x00000000, ++0xca4,0x00000080, ++0xca8,0x00000000, ++0xcac,0x00000000, ++0xcb0,0x00000000, ++0xcb4,0x00000000, ++0xcb8,0x00000000, ++0xcbc,0x28000000, ++0xcc0,0x00000000, ++0xcc4,0x00000000, ++0xcc8,0x00000000, ++0xccc,0x00000000, ++0xcd0,0x00000000, ++0xcd4,0x00000000, ++0xcd8,0x64b22427, ++0xcdc,0x00766932, ++0xce0,0x00222222, ++0xce4,0x00000000, ++0xce8,0x37644302, ++0xcec,0x2f97d40c, ++0xd00,0x00080740, ++0xd04,0x00020403, ++0xd08,0x0000907f, ++0xd0c,0x20010201, ++0xd10,0xa0633333, ++0xd14,0x3333bc43, ++0xd18,0x7a8f5b6b, ++0xd2c,0xcc979975, ++0xd30,0x00000000, ++0xd34,0x80608000, ++0xd38,0x00000000, ++0xd3c,0x00027293, ++0xd40,0x00000000, ++0xd44,0x00000000, ++0xd48,0x00000000, ++0xd4c,0x00000000, ++0xd50,0x6437140a, ++0xd54,0x00000000, ++0xd58,0x00000000, ++0xd5c,0x30032064, ++0xd60,0x4653de68, ++0xd64,0x04518a3c, ++0xd68,0x00002101, ++0xd6c,0x2a201c16, ++0xd70,0x1812362e, ++0xd74,0x322c2220, ++0xd78,0x000e3c24, ++0xe00,0x2a2a2a2a, ++0xe04,0x2a2a2a2a, ++0xe08,0x03902a2a, ++0xe10,0x2a2a2a2a, ++0xe14,0x2a2a2a2a, ++0xe18,0x2a2a2a2a, ++0xe1c,0x2a2a2a2a, ++0xe28,0x00000000, ++0xe30,0x1000dc1f, ++0xe34,0x10008c1f, ++0xe38,0x02140102, ++0xe3c,0x681604c2, ++0xe40,0x01007c00, ++0xe44,0x01004800, ++0xe48,0xfb000000, ++0xe4c,0x000028d1, ++0xe50,0x1000dc1f, ++0xe54,0x10008c1f, ++0xe58,0x02140102, ++0xe5c,0x28160d05, ++0xe60,0x00000010, ++0xe68,0x001b25a4, ++0xe6c,0x63db25a4, ++0xe70,0x63db25a4, ++0xe74,0x0c1b25a4, ++0xe78,0x0c1b25a4, ++0xe7c,0x0c1b25a4, ++0xe80,0x0c1b25a4, ++0xe84,0x63db25a4, ++0xe88,0x0c1b25a4, ++0xe8c,0x63db25a4, ++0xed0,0x63db25a4, ++0xed4,0x63db25a4, ++0xed8,0x63db25a4, ++0xedc,0x001b25a4, ++0xee0,0x001b25a4, ++0xeec,0x6fdb25a4, ++0xf14,0x00000003, ++0xf4c,0x00000000, ++0xf00,0x00000300, ++}; ++ ++u32 Rtl8192CUPHY_REG_Array_PG_HP[PHY_REG_Array_PG_HPLength] = { ++0xe00,0xffffffff,0x06080808, ++0xe04,0xffffffff,0x00040406, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x04060608, ++0xe14,0xffffffff,0x00020204, ++0xe18,0xffffffff,0x04060608, ++0xe1c,0xffffffff,0x00020204, ++0x830,0xffffffff,0x06080808, ++0x834,0xffffffff,0x00040406, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x04060608, ++0x848,0xffffffff,0x00020204, ++0x84c,0xffffffff,0x04060608, ++0x868,0xffffffff,0x00020204, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++0xe00,0xffffffff,0x00000000, ++0xe04,0xffffffff,0x00000000, ++0xe08,0x0000ff00,0x00000000, ++0x86c,0xffffff00,0x00000000, ++0xe10,0xffffffff,0x00000000, ++0xe14,0xffffffff,0x00000000, ++0xe18,0xffffffff,0x00000000, ++0xe1c,0xffffffff,0x00000000, ++0x830,0xffffffff,0x00000000, ++0x834,0xffffffff,0x00000000, ++0x838,0xffffff00,0x00000000, ++0x86c,0x000000ff,0x00000000, ++0x83c,0xffffffff,0x00000000, ++0x848,0xffffffff,0x00000000, ++0x84c,0xffffffff,0x00000000, ++0x868,0xffffffff,0x00000000, ++}; ++ ++u32 Rtl8192CURadioA_2TArray[RadioA_2TArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x019,0x00000000, ++0x01a,0x00010255, ++0x01b,0x00060a00, ++0x01c,0x000fc378, ++0x01d,0x000a1250, ++0x01e,0x0004445f, ++0x01f,0x00080001, ++0x020,0x0000b614, ++0x021,0x0006c000, ++0x022,0x00000000, ++0x023,0x00001558, ++0x024,0x00000060, ++0x025,0x00000483, ++0x026,0x0004f000, ++0x027,0x000ec7d9, ++0x028,0x000577c0, ++0x029,0x00004783, ++0x02a,0x00000001, ++0x02b,0x00021334, ++0x02a,0x00000000, ++0x02b,0x00000054, ++0x02a,0x00000001, ++0x02b,0x00000808, ++0x02b,0x00053333, ++0x02c,0x0000000c, ++0x02a,0x00000002, ++0x02b,0x00000808, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000003, ++0x02b,0x00000808, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000004, ++0x02b,0x00000808, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x00000005, ++0x02b,0x00000808, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x00000006, ++0x02b,0x00000709, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000007, ++0x02b,0x00000709, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000008, ++0x02b,0x0000060a, ++0x02b,0x0004b333, ++0x02c,0x0000000d, ++0x02a,0x00000009, ++0x02b,0x0000060a, ++0x02b,0x00053333, ++0x02c,0x0000000d, ++0x02a,0x0000000a, ++0x02b,0x0000060a, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x0000000b, ++0x02b,0x0000060a, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x0000000c, ++0x02b,0x0000060a, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x0000000d, ++0x02b,0x0000060a, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x0000000e, ++0x02b,0x0000050b, ++0x02b,0x00066666, ++0x02c,0x0000001a, ++0x02a,0x000e0000, ++0x010,0x0004000f, ++0x011,0x000e31fc, ++0x010,0x0006000f, ++0x011,0x000ff9f8, ++0x010,0x0002000f, ++0x011,0x000203f9, ++0x010,0x0003000f, ++0x011,0x000ff500, ++0x010,0x00000000, ++0x011,0x00000000, ++0x010,0x0008000f, ++0x011,0x0003f100, ++0x010,0x0009000f, ++0x011,0x00023100, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287b3, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x0001429b, ++0x013,0x00010299, ++0x013,0x0000c29c, ++0x013,0x000081a0, ++0x013,0x000040ac, ++0x013,0x00000020, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f424, ++0x015,0x0004f424, ++0x015,0x0008f424, ++0x015,0x000cf424, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++0x000,0x00010159, ++0x018,0x0000f401, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01f,0x00080003, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01e,0x00044457, ++0x01f,0x00080000, ++0x000,0x00030159, ++}; ++ ++u32 Rtl8192CURadioB_2TArray[RadioB_2TArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287af, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x00014297, ++0x013,0x00010295, ++0x013,0x0000c298, ++0x013,0x0000819c, ++0x013,0x000040a8, ++0x013,0x0000001c, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f424, ++0x015,0x0004f424, ++0x015,0x0008f424, ++0x015,0x000cf424, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++}; ++ ++u32 Rtl8192CURadioA_1TArray[RadioA_1TArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x019,0x00000000, ++0x01a,0x00010255, ++0x01b,0x00060a00, ++0x01c,0x000fc378, ++0x01d,0x000a1250, ++0x01e,0x0004445f, ++0x01f,0x00080001, ++0x020,0x0000b614, ++0x021,0x0006c000, ++0x022,0x00000000, ++0x023,0x00001558, ++0x024,0x00000060, ++0x025,0x00000483, ++0x026,0x0004f000, ++0x027,0x000ec7d9, ++0x028,0x000577c0, ++0x029,0x00004783, ++0x02a,0x00000001, ++0x02b,0x00021334, ++0x02a,0x00000000, ++0x02b,0x00000054, ++0x02a,0x00000001, ++0x02b,0x00000808, ++0x02b,0x00053333, ++0x02c,0x0000000c, ++0x02a,0x00000002, ++0x02b,0x00000808, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000003, ++0x02b,0x00000808, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000004, ++0x02b,0x00000808, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x00000005, ++0x02b,0x00000808, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x00000006, ++0x02b,0x00000709, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000007, ++0x02b,0x00000709, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000008, ++0x02b,0x0000060a, ++0x02b,0x0004b333, ++0x02c,0x0000000d, ++0x02a,0x00000009, ++0x02b,0x0000060a, ++0x02b,0x00053333, ++0x02c,0x0000000d, ++0x02a,0x0000000a, ++0x02b,0x0000060a, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x0000000b, ++0x02b,0x0000060a, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x0000000c, ++0x02b,0x0000060a, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x0000000d, ++0x02b,0x0000060a, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x0000000e, ++0x02b,0x0000050b, ++0x02b,0x00066666, ++0x02c,0x0000001a, ++0x02a,0x000e0000, ++0x010,0x0004000f, ++0x011,0x000e31fc, ++0x010,0x0006000f, ++0x011,0x000ff9f8, ++0x010,0x0002000f, ++0x011,0x000203f9, ++0x010,0x0003000f, ++0x011,0x000ff500, ++0x010,0x00000000, ++0x011,0x00000000, ++0x010,0x0008000f, ++0x011,0x0003f100, ++0x010,0x0009000f, ++0x011,0x00023100, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287b3, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x0001429b, ++0x013,0x00010299, ++0x013,0x0000c29c, ++0x013,0x000081a0, ++0x013,0x000040ac, ++0x013,0x00000020, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f405, ++0x015,0x0004f405, ++0x015,0x0008f405, ++0x015,0x000cf405, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++0x000,0x00010159, ++0x018,0x0000f401, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01f,0x00080003, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01e,0x00044457, ++0x01f,0x00080000, ++0x000,0x00030159, ++}; ++ ++u32 Rtl8192CURadioB_1TArray[RadioB_1TArrayLength] = { ++0x0, }; ++ ++ ++u32 Rtl8192CURadioA_2T_mCardArray[RadioA_2T_mCardArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x019,0x00000000, ++0x01a,0x00010255, ++0x01b,0x00060a00, ++0x01c,0x000fc378, ++0x01d,0x000a1250, ++0x01e,0x0004445f, ++0x01f,0x00080001, ++0x020,0x0000b614, ++0x021,0x0006c000, ++0x022,0x00000000, ++0x023,0x00001558, ++0x024,0x00000060, ++0x025,0x00000483, ++0x026,0x0004f000, ++0x027,0x000ec7d9, ++0x028,0x000577c0, ++0x029,0x00004783, ++0x02a,0x00000001, ++0x02b,0x00021334, ++0x02a,0x00000000, ++0x02b,0x00000054, ++0x02a,0x00000001, ++0x02b,0x00000808, ++0x02b,0x00053333, ++0x02c,0x0000000c, ++0x02a,0x00000002, ++0x02b,0x00000808, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000003, ++0x02b,0x00000808, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000004, ++0x02b,0x00000808, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x00000005, ++0x02b,0x00000808, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x00000006, ++0x02b,0x00000709, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000007, ++0x02b,0x00000709, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000008, ++0x02b,0x0000060a, ++0x02b,0x0004b333, ++0x02c,0x0000000d, ++0x02a,0x00000009, ++0x02b,0x0000060a, ++0x02b,0x00053333, ++0x02c,0x0000000d, ++0x02a,0x0000000a, ++0x02b,0x0000060a, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x0000000b, ++0x02b,0x0000060a, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x0000000c, ++0x02b,0x0000060a, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x0000000d, ++0x02b,0x0000060a, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x0000000e, ++0x02b,0x0000050b, ++0x02b,0x00066666, ++0x02c,0x0000001a, ++0x02a,0x000e0000, ++0x010,0x0004000f, ++0x011,0x000e31fc, ++0x010,0x0006000f, ++0x011,0x000ff9f8, ++0x010,0x0002000f, ++0x011,0x000203f9, ++0x010,0x0003000f, ++0x011,0x000ff500, ++0x010,0x00000000, ++0x011,0x00000000, ++0x010,0x0008000f, ++0x011,0x0003f100, ++0x010,0x0009000f, ++0x011,0x00023100, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287b3, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x0001429b, ++0x013,0x00010299, ++0x013,0x0000c29c, ++0x013,0x000081a0, ++0x013,0x000040ac, ++0x013,0x00000020, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f424, ++0x015,0x0004f424, ++0x015,0x0008f424, ++0x015,0x000cf424, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++0x000,0x00010159, ++0x018,0x0000f401, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01f,0x00080003, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01e,0x00044457, ++0x01f,0x00080000, ++0x000,0x00030159, ++}; ++ ++u32 Rtl8192CURadioB_2T_mCardArray[RadioB_2T_mCardArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287af, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x00014297, ++0x013,0x00010295, ++0x013,0x0000c298, ++0x013,0x0000819c, ++0x013,0x000040a8, ++0x013,0x0000001c, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f424, ++0x015,0x0004f424, ++0x015,0x0008f424, ++0x015,0x000cf424, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++}; ++ ++u32 Rtl8192CURadioA_1T_mCardArray[RadioA_1T_mCardArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb1, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e52c, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x019,0x00000000, ++0x01a,0x00010255, ++0x01b,0x00060a00, ++0x01c,0x000fc378, ++0x01d,0x000a1250, ++0x01e,0x0004445f, ++0x01f,0x00080001, ++0x020,0x0000b614, ++0x021,0x0006c000, ++0x022,0x00000000, ++0x023,0x00001558, ++0x024,0x00000060, ++0x025,0x00000483, ++0x026,0x0004f200, ++0x027,0x000ec7d9, ++0x028,0x000577c0, ++0x029,0x00004783, ++0x02a,0x00000001, ++0x02b,0x00021334, ++0x02a,0x00000000, ++0x02b,0x00000054, ++0x02a,0x00000001, ++0x02b,0x00000808, ++0x02b,0x00053333, ++0x02c,0x0000000c, ++0x02a,0x00000002, ++0x02b,0x00000808, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000003, ++0x02b,0x00000808, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000004, ++0x02b,0x00000808, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x00000005, ++0x02b,0x00000808, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x00000006, ++0x02b,0x00000709, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000007, ++0x02b,0x00000709, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000008, ++0x02b,0x0000060a, ++0x02b,0x0004b333, ++0x02c,0x0000000d, ++0x02a,0x00000009, ++0x02b,0x0000060a, ++0x02b,0x00053333, ++0x02c,0x0000000d, ++0x02a,0x0000000a, ++0x02b,0x0000060a, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x0000000b, ++0x02b,0x0000060a, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x0000000c, ++0x02b,0x0000060a, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x0000000d, ++0x02b,0x0000060a, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x0000000e, ++0x02b,0x0000050b, ++0x02b,0x00066666, ++0x02c,0x0000001a, ++0x02a,0x000e0000, ++0x010,0x0004000f, ++0x011,0x000e31fc, ++0x010,0x0006000f, ++0x011,0x000ff9f8, ++0x010,0x0002000f, ++0x011,0x000203f9, ++0x010,0x0003000f, ++0x011,0x000ff500, ++0x010,0x00000000, ++0x011,0x00000000, ++0x010,0x0008000f, ++0x011,0x0003f100, ++0x010,0x0009000f, ++0x011,0x00023100, ++0x012,0x00032000, ++0x012,0x00071000, ++0x012,0x000b0000, ++0x012,0x000fc000, ++0x013,0x000287b3, ++0x013,0x000244b7, ++0x013,0x000204ab, ++0x013,0x0001c49f, ++0x013,0x00018493, ++0x013,0x0001429b, ++0x013,0x00010299, ++0x013,0x0000c29c, ++0x013,0x000081a0, ++0x013,0x000040ac, ++0x013,0x00000020, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f424, ++0x015,0x0004f424, ++0x015,0x0008f424, ++0x015,0x000cf424, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++0x000,0x00010159, ++0x018,0x0000f401, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01f,0x00080003, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01e,0x00044457, ++0x01f,0x00080000, ++0x000,0x00030159, ++}; ++ ++u32 Rtl8192CURadioB_1T_mCardArray[RadioB_1T_mCardArrayLength] = { ++0x0, }; ++ ++u32 Rtl8192CURadioA_1T_HPArray[RadioA_1T_HPArrayLength] = { ++0x000,0x00030159, ++0x001,0x00031284, ++0x002,0x00098000, ++0x003,0x00018c63, ++0x004,0x000210e7, ++0x009,0x0002044f, ++0x00a,0x0001adb0, ++0x00b,0x00054867, ++0x00c,0x0008992e, ++0x00d,0x0000e529, ++0x00e,0x00039ce7, ++0x00f,0x00000451, ++0x019,0x00000000, ++0x01a,0x00000255, ++0x01b,0x00060a00, ++0x01c,0x000fc378, ++0x01d,0x000a1250, ++0x01e,0x0004445f, ++0x01f,0x00080001, ++0x020,0x0000b614, ++0x021,0x0006c000, ++0x022,0x0000083c, ++0x023,0x00001558, ++0x024,0x00000060, ++0x025,0x00000483, ++0x026,0x0004f000, ++0x027,0x000ec7d9, ++0x028,0x000977c0, ++0x029,0x00004783, ++0x02a,0x00000001, ++0x02b,0x00021334, ++0x02a,0x00000000, ++0x02b,0x00000054, ++0x02a,0x00000001, ++0x02b,0x00000808, ++0x02b,0x00053333, ++0x02c,0x0000000c, ++0x02a,0x00000002, ++0x02b,0x00000808, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000003, ++0x02b,0x00000808, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000004, ++0x02b,0x00000808, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x00000005, ++0x02b,0x00000808, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x00000006, ++0x02b,0x00000709, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x00000007, ++0x02b,0x00000709, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x00000008, ++0x02b,0x0000060a, ++0x02b,0x0004b333, ++0x02c,0x0000000d, ++0x02a,0x00000009, ++0x02b,0x0000060a, ++0x02b,0x00053333, ++0x02c,0x0000000d, ++0x02a,0x0000000a, ++0x02b,0x0000060a, ++0x02b,0x0005b333, ++0x02c,0x0000000d, ++0x02a,0x0000000b, ++0x02b,0x0000060a, ++0x02b,0x00063333, ++0x02c,0x0000000d, ++0x02a,0x0000000c, ++0x02b,0x0000060a, ++0x02b,0x0006b333, ++0x02c,0x0000000d, ++0x02a,0x0000000d, ++0x02b,0x0000060a, ++0x02b,0x00073333, ++0x02c,0x0000000d, ++0x02a,0x0000000e, ++0x02b,0x0000050b, ++0x02b,0x00066666, ++0x02c,0x0000001a, ++0x02a,0x000e0000, ++0x010,0x0004000f, ++0x011,0x000e31fc, ++0x010,0x0006000f, ++0x011,0x000ff9f8, ++0x010,0x0002000f, ++0x011,0x000203f9, ++0x010,0x0003000f, ++0x011,0x000ff500, ++0x010,0x00000000, ++0x011,0x00000000, ++0x010,0x0008000f, ++0x011,0x0003f100, ++0x010,0x0009000f, ++0x011,0x00023100, ++0x012,0x000d8000, ++0x012,0x00090000, ++0x012,0x00051000, ++0x012,0x00012000, ++0x013,0x00028fb4, ++0x013,0x00024fa8, ++0x013,0x000207a4, ++0x013,0x0001c3b0, ++0x013,0x000183a4, ++0x013,0x00014398, ++0x013,0x000101a4, ++0x013,0x0000c198, ++0x013,0x000080a4, ++0x013,0x00004098, ++0x013,0x00000000, ++0x014,0x0001944c, ++0x014,0x00059444, ++0x014,0x0009944c, ++0x014,0x000d9444, ++0x015,0x0000f405, ++0x015,0x0004f405, ++0x015,0x0008f405, ++0x015,0x000cf405, ++0x016,0x000e0330, ++0x016,0x000a0330, ++0x016,0x00060330, ++0x016,0x00020330, ++0x000,0x00010159, ++0x018,0x0000f401, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01f,0x00080003, ++0x0fe,0x00000000, ++0x0fe,0x00000000, ++0x01e,0x00044457, ++0x01f,0x00080000, ++0x000,0x00030159, ++}; ++ ++u32 Rtl8192CURadioB_GM_Array[RadioB_GM_ArrayLength] = { ++0x0, }; ++ ++// MAC reg V14 - 2011-11-23 ++u32 Rtl8192CUMAC_2T_Array[MAC_2T_ArrayLength] = { ++0x420,0x00000080, ++0x423,0x00000000, ++0x430,0x00000000, ++0x431,0x00000000, ++0x432,0x00000000, ++0x433,0x00000001, ++0x434,0x00000004, ++0x435,0x00000005, ++0x436,0x00000006, ++0x437,0x00000007, ++0x438,0x00000000, ++0x439,0x00000000, ++0x43a,0x00000000, ++0x43b,0x00000001, ++0x43c,0x00000004, ++0x43d,0x00000005, ++0x43e,0x00000006, ++0x43f,0x00000007, ++0x440,0x0000005d, ++0x441,0x00000001, ++0x442,0x00000000, ++0x444,0x00000015, ++0x445,0x000000f0, ++0x446,0x0000000f, ++0x447,0x00000000, ++0x458,0x00000041, ++0x459,0x000000a8, ++0x45a,0x00000072, ++0x45b,0x000000b9, ++0x460,0x00000066, ++0x461,0x00000066, ++0x462,0x00000008, ++0x463,0x00000003, ++0x4c8,0x000000ff, ++0x4c9,0x00000008, ++0x4cc,0x000000ff, ++0x4cd,0x000000ff, ++0x4ce,0x00000001, ++0x500,0x00000026, ++0x501,0x000000a2, ++0x502,0x0000002f, ++0x503,0x00000000, ++0x504,0x00000028, ++0x505,0x000000a3, ++0x506,0x0000005e, ++0x507,0x00000000, ++0x508,0x0000002b, ++0x509,0x000000a4, ++0x50a,0x0000005e, ++0x50b,0x00000000, ++0x50c,0x0000004f, ++0x50d,0x000000a4, ++0x50e,0x00000000, ++0x50f,0x00000000, ++0x512,0x0000001c, ++0x514,0x0000000a, ++0x515,0x00000010, ++0x516,0x0000000a, ++0x517,0x00000010, ++0x51a,0x00000016, ++0x524,0x0000000f, ++0x525,0x0000004f, ++0x546,0x00000040, ++0x547,0x00000000, ++0x550,0x00000010, ++0x551,0x00000010, ++0x559,0x00000002, ++0x55a,0x00000002, ++0x55d,0x000000ff, ++0x605,0x00000030, ++0x608,0x0000000e, ++0x609,0x0000002a, ++0x652,0x00000020, ++0x652,0x00000020, ++0x63c,0x00000008, ++0x63d,0x00000008, ++0x63e,0x0000000c, ++0x63f,0x0000000c, ++0x66e,0x00000005, ++0x700,0x00000021, ++0x701,0x00000043, ++0x702,0x00000065, ++0x703,0x00000087, ++0x708,0x00000021, ++0x709,0x00000043, ++0x70a,0x00000065, ++0x70b,0x00000087, ++}; ++ ++u32 Rtl8192CUMACPHY_Array_PG[MACPHY_Array_PGLength] = { ++0x0, }; ++ ++u32 Rtl8192CUAGCTAB_2TArray[AGCTAB_2TArrayLength] = { ++0xc78,0x7b000001, ++0xc78,0x7b010001, ++0xc78,0x7b020001, ++0xc78,0x7b030001, ++0xc78,0x7b040001, ++0xc78,0x7b050001, ++0xc78,0x7a060001, ++0xc78,0x79070001, ++0xc78,0x78080001, ++0xc78,0x77090001, ++0xc78,0x760a0001, ++0xc78,0x750b0001, ++0xc78,0x740c0001, ++0xc78,0x730d0001, ++0xc78,0x720e0001, ++0xc78,0x710f0001, ++0xc78,0x70100001, ++0xc78,0x6f110001, ++0xc78,0x6e120001, ++0xc78,0x6d130001, ++0xc78,0x6c140001, ++0xc78,0x6b150001, ++0xc78,0x6a160001, ++0xc78,0x69170001, ++0xc78,0x68180001, ++0xc78,0x67190001, ++0xc78,0x661a0001, ++0xc78,0x651b0001, ++0xc78,0x641c0001, ++0xc78,0x631d0001, ++0xc78,0x621e0001, ++0xc78,0x611f0001, ++0xc78,0x60200001, ++0xc78,0x49210001, ++0xc78,0x48220001, ++0xc78,0x47230001, ++0xc78,0x46240001, ++0xc78,0x45250001, ++0xc78,0x44260001, ++0xc78,0x43270001, ++0xc78,0x42280001, ++0xc78,0x41290001, ++0xc78,0x402a0001, ++0xc78,0x262b0001, ++0xc78,0x252c0001, ++0xc78,0x242d0001, ++0xc78,0x232e0001, ++0xc78,0x222f0001, ++0xc78,0x21300001, ++0xc78,0x20310001, ++0xc78,0x06320001, ++0xc78,0x05330001, ++0xc78,0x04340001, ++0xc78,0x03350001, ++0xc78,0x02360001, ++0xc78,0x01370001, ++0xc78,0x00380001, ++0xc78,0x00390001, ++0xc78,0x003a0001, ++0xc78,0x003b0001, ++0xc78,0x003c0001, ++0xc78,0x003d0001, ++0xc78,0x003e0001, ++0xc78,0x003f0001, ++0xc78,0x7b400001, ++0xc78,0x7b410001, ++0xc78,0x7b420001, ++0xc78,0x7b430001, ++0xc78,0x7b440001, ++0xc78,0x7b450001, ++0xc78,0x7a460001, ++0xc78,0x79470001, ++0xc78,0x78480001, ++0xc78,0x77490001, ++0xc78,0x764a0001, ++0xc78,0x754b0001, ++0xc78,0x744c0001, ++0xc78,0x734d0001, ++0xc78,0x724e0001, ++0xc78,0x714f0001, ++0xc78,0x70500001, ++0xc78,0x6f510001, ++0xc78,0x6e520001, ++0xc78,0x6d530001, ++0xc78,0x6c540001, ++0xc78,0x6b550001, ++0xc78,0x6a560001, ++0xc78,0x69570001, ++0xc78,0x68580001, ++0xc78,0x67590001, ++0xc78,0x665a0001, ++0xc78,0x655b0001, ++0xc78,0x645c0001, ++0xc78,0x635d0001, ++0xc78,0x625e0001, ++0xc78,0x615f0001, ++0xc78,0x60600001, ++0xc78,0x49610001, ++0xc78,0x48620001, ++0xc78,0x47630001, ++0xc78,0x46640001, ++0xc78,0x45650001, ++0xc78,0x44660001, ++0xc78,0x43670001, ++0xc78,0x42680001, ++0xc78,0x41690001, ++0xc78,0x406a0001, ++0xc78,0x266b0001, ++0xc78,0x256c0001, ++0xc78,0x246d0001, ++0xc78,0x236e0001, ++0xc78,0x226f0001, ++0xc78,0x21700001, ++0xc78,0x20710001, ++0xc78,0x06720001, ++0xc78,0x05730001, ++0xc78,0x04740001, ++0xc78,0x03750001, ++0xc78,0x02760001, ++0xc78,0x01770001, ++0xc78,0x00780001, ++0xc78,0x00790001, ++0xc78,0x007a0001, ++0xc78,0x007b0001, ++0xc78,0x007c0001, ++0xc78,0x007d0001, ++0xc78,0x007e0001, ++0xc78,0x007f0001, ++0xc78,0x3800001e, ++0xc78,0x3801001e, ++0xc78,0x3802001e, ++0xc78,0x3803001e, ++0xc78,0x3804001e, ++0xc78,0x3805001e, ++0xc78,0x3806001e, ++0xc78,0x3807001e, ++0xc78,0x3808001e, ++0xc78,0x3c09001e, ++0xc78,0x3e0a001e, ++0xc78,0x400b001e, ++0xc78,0x440c001e, ++0xc78,0x480d001e, ++0xc78,0x4c0e001e, ++0xc78,0x500f001e, ++0xc78,0x5210001e, ++0xc78,0x5611001e, ++0xc78,0x5a12001e, ++0xc78,0x5e13001e, ++0xc78,0x6014001e, ++0xc78,0x6015001e, ++0xc78,0x6016001e, ++0xc78,0x6217001e, ++0xc78,0x6218001e, ++0xc78,0x6219001e, ++0xc78,0x621a001e, ++0xc78,0x621b001e, ++0xc78,0x621c001e, ++0xc78,0x621d001e, ++0xc78,0x621e001e, ++0xc78,0x621f001e, ++}; ++ ++u32 Rtl8192CUAGCTAB_1TArray[AGCTAB_1TArrayLength] = { ++0xc78,0x7b000001, ++0xc78,0x7b010001, ++0xc78,0x7b020001, ++0xc78,0x7b030001, ++0xc78,0x7b040001, ++0xc78,0x7b050001, ++0xc78,0x7a060001, ++0xc78,0x79070001, ++0xc78,0x78080001, ++0xc78,0x77090001, ++0xc78,0x760a0001, ++0xc78,0x750b0001, ++0xc78,0x740c0001, ++0xc78,0x730d0001, ++0xc78,0x720e0001, ++0xc78,0x710f0001, ++0xc78,0x70100001, ++0xc78,0x6f110001, ++0xc78,0x6e120001, ++0xc78,0x6d130001, ++0xc78,0x6c140001, ++0xc78,0x6b150001, ++0xc78,0x6a160001, ++0xc78,0x69170001, ++0xc78,0x68180001, ++0xc78,0x67190001, ++0xc78,0x661a0001, ++0xc78,0x651b0001, ++0xc78,0x641c0001, ++0xc78,0x631d0001, ++0xc78,0x621e0001, ++0xc78,0x611f0001, ++0xc78,0x60200001, ++0xc78,0x49210001, ++0xc78,0x48220001, ++0xc78,0x47230001, ++0xc78,0x46240001, ++0xc78,0x45250001, ++0xc78,0x44260001, ++0xc78,0x43270001, ++0xc78,0x42280001, ++0xc78,0x41290001, ++0xc78,0x402a0001, ++0xc78,0x262b0001, ++0xc78,0x252c0001, ++0xc78,0x242d0001, ++0xc78,0x232e0001, ++0xc78,0x222f0001, ++0xc78,0x21300001, ++0xc78,0x20310001, ++0xc78,0x06320001, ++0xc78,0x05330001, ++0xc78,0x04340001, ++0xc78,0x03350001, ++0xc78,0x02360001, ++0xc78,0x01370001, ++0xc78,0x00380001, ++0xc78,0x00390001, ++0xc78,0x003a0001, ++0xc78,0x003b0001, ++0xc78,0x003c0001, ++0xc78,0x003d0001, ++0xc78,0x003e0001, ++0xc78,0x003f0001, ++0xc78,0x7b400001, ++0xc78,0x7b410001, ++0xc78,0x7b420001, ++0xc78,0x7b430001, ++0xc78,0x7b440001, ++0xc78,0x7b450001, ++0xc78,0x7a460001, ++0xc78,0x79470001, ++0xc78,0x78480001, ++0xc78,0x77490001, ++0xc78,0x764a0001, ++0xc78,0x754b0001, ++0xc78,0x744c0001, ++0xc78,0x734d0001, ++0xc78,0x724e0001, ++0xc78,0x714f0001, ++0xc78,0x70500001, ++0xc78,0x6f510001, ++0xc78,0x6e520001, ++0xc78,0x6d530001, ++0xc78,0x6c540001, ++0xc78,0x6b550001, ++0xc78,0x6a560001, ++0xc78,0x69570001, ++0xc78,0x68580001, ++0xc78,0x67590001, ++0xc78,0x665a0001, ++0xc78,0x655b0001, ++0xc78,0x645c0001, ++0xc78,0x635d0001, ++0xc78,0x625e0001, ++0xc78,0x615f0001, ++0xc78,0x60600001, ++0xc78,0x49610001, ++0xc78,0x48620001, ++0xc78,0x47630001, ++0xc78,0x46640001, ++0xc78,0x45650001, ++0xc78,0x44660001, ++0xc78,0x43670001, ++0xc78,0x42680001, ++0xc78,0x41690001, ++0xc78,0x406a0001, ++0xc78,0x266b0001, ++0xc78,0x256c0001, ++0xc78,0x246d0001, ++0xc78,0x236e0001, ++0xc78,0x226f0001, ++0xc78,0x21700001, ++0xc78,0x20710001, ++0xc78,0x06720001, ++0xc78,0x05730001, ++0xc78,0x04740001, ++0xc78,0x03750001, ++0xc78,0x02760001, ++0xc78,0x01770001, ++0xc78,0x00780001, ++0xc78,0x00790001, ++0xc78,0x007a0001, ++0xc78,0x007b0001, ++0xc78,0x007c0001, ++0xc78,0x007d0001, ++0xc78,0x007e0001, ++0xc78,0x007f0001, ++0xc78,0x3800001e, ++0xc78,0x3801001e, ++0xc78,0x3802001e, ++0xc78,0x3803001e, ++0xc78,0x3804001e, ++0xc78,0x3805001e, ++0xc78,0x3806001e, ++0xc78,0x3807001e, ++0xc78,0x3808001e, ++0xc78,0x3c09001e, ++0xc78,0x3e0a001e, ++0xc78,0x400b001e, ++0xc78,0x440c001e, ++0xc78,0x480d001e, ++0xc78,0x4c0e001e, ++0xc78,0x500f001e, ++0xc78,0x5210001e, ++0xc78,0x5611001e, ++0xc78,0x5a12001e, ++0xc78,0x5e13001e, ++0xc78,0x6014001e, ++0xc78,0x6015001e, ++0xc78,0x6016001e, ++0xc78,0x6217001e, ++0xc78,0x6218001e, ++0xc78,0x6219001e, ++0xc78,0x621a001e, ++0xc78,0x621b001e, ++0xc78,0x621c001e, ++0xc78,0x621d001e, ++0xc78,0x621e001e, ++0xc78,0x621f001e, ++}; ++ ++u32 Rtl8192CUAGCTAB_1T_HPArray[AGCTAB_1T_HPArrayLength] = { ++0xc78,0x7b000001, ++0xc78,0x7b010001, ++0xc78,0x7b020001, ++0xc78,0x7b030001, ++0xc78,0x7b040001, ++0xc78,0x7b050001, ++0xc78,0x7b060001, ++0xc78,0x7b070001, ++0xc78,0x7b080001, ++0xc78,0x7a090001, ++0xc78,0x790a0001, ++0xc78,0x780b0001, ++0xc78,0x770c0001, ++0xc78,0x760d0001, ++0xc78,0x750e0001, ++0xc78,0x740f0001, ++0xc78,0x73100001, ++0xc78,0x72110001, ++0xc78,0x71120001, ++0xc78,0x70130001, ++0xc78,0x6f140001, ++0xc78,0x6e150001, ++0xc78,0x6d160001, ++0xc78,0x6c170001, ++0xc78,0x6b180001, ++0xc78,0x6a190001, ++0xc78,0x691a0001, ++0xc78,0x681b0001, ++0xc78,0x671c0001, ++0xc78,0x661d0001, ++0xc78,0x651e0001, ++0xc78,0x641f0001, ++0xc78,0x63200001, ++0xc78,0x62210001, ++0xc78,0x61220001, ++0xc78,0x60230001, ++0xc78,0x46240001, ++0xc78,0x45250001, ++0xc78,0x44260001, ++0xc78,0x43270001, ++0xc78,0x42280001, ++0xc78,0x41290001, ++0xc78,0x402a0001, ++0xc78,0x262b0001, ++0xc78,0x252c0001, ++0xc78,0x242d0001, ++0xc78,0x232e0001, ++0xc78,0x222f0001, ++0xc78,0x21300001, ++0xc78,0x20310001, ++0xc78,0x06320001, ++0xc78,0x05330001, ++0xc78,0x04340001, ++0xc78,0x03350001, ++0xc78,0x02360001, ++0xc78,0x01370001, ++0xc78,0x00380001, ++0xc78,0x00390001, ++0xc78,0x003a0001, ++0xc78,0x003b0001, ++0xc78,0x003c0001, ++0xc78,0x003d0001, ++0xc78,0x003e0001, ++0xc78,0x003f0001, ++0xc78,0x7b400001, ++0xc78,0x7b410001, ++0xc78,0x7b420001, ++0xc78,0x7b430001, ++0xc78,0x7b440001, ++0xc78,0x7b450001, ++0xc78,0x7b460001, ++0xc78,0x7b470001, ++0xc78,0x7b480001, ++0xc78,0x7a490001, ++0xc78,0x794a0001, ++0xc78,0x784b0001, ++0xc78,0x774c0001, ++0xc78,0x764d0001, ++0xc78,0x754e0001, ++0xc78,0x744f0001, ++0xc78,0x73500001, ++0xc78,0x72510001, ++0xc78,0x71520001, ++0xc78,0x70530001, ++0xc78,0x6f540001, ++0xc78,0x6e550001, ++0xc78,0x6d560001, ++0xc78,0x6c570001, ++0xc78,0x6b580001, ++0xc78,0x6a590001, ++0xc78,0x695a0001, ++0xc78,0x685b0001, ++0xc78,0x675c0001, ++0xc78,0x665d0001, ++0xc78,0x655e0001, ++0xc78,0x645f0001, ++0xc78,0x63600001, ++0xc78,0x62610001, ++0xc78,0x61620001, ++0xc78,0x60630001, ++0xc78,0x46640001, ++0xc78,0x45650001, ++0xc78,0x44660001, ++0xc78,0x43670001, ++0xc78,0x42680001, ++0xc78,0x41690001, ++0xc78,0x406a0001, ++0xc78,0x266b0001, ++0xc78,0x256c0001, ++0xc78,0x246d0001, ++0xc78,0x236e0001, ++0xc78,0x226f0001, ++0xc78,0x21700001, ++0xc78,0x20710001, ++0xc78,0x06720001, ++0xc78,0x05730001, ++0xc78,0x04740001, ++0xc78,0x03750001, ++0xc78,0x02760001, ++0xc78,0x01770001, ++0xc78,0x00780001, ++0xc78,0x00790001, ++0xc78,0x007a0001, ++0xc78,0x007b0001, ++0xc78,0x007c0001, ++0xc78,0x007d0001, ++0xc78,0x007e0001, ++0xc78,0x007f0001, ++0xc78,0x3800001e, ++0xc78,0x3801001e, ++0xc78,0x3802001e, ++0xc78,0x3803001e, ++0xc78,0x3804001e, ++0xc78,0x3805001e, ++0xc78,0x3806001e, ++0xc78,0x3807001e, ++0xc78,0x3808001e, ++0xc78,0x3c09001e, ++0xc78,0x3e0a001e, ++0xc78,0x400b001e, ++0xc78,0x440c001e, ++0xc78,0x480d001e, ++0xc78,0x4c0e001e, ++0xc78,0x500f001e, ++0xc78,0x5210001e, ++0xc78,0x5611001e, ++0xc78,0x5a12001e, ++0xc78,0x5e13001e, ++0xc78,0x6014001e, ++0xc78,0x6015001e, ++0xc78,0x6016001e, ++0xc78,0x6217001e, ++0xc78,0x6218001e, ++0xc78,0x6219001e, ++0xc78,0x621a001e, ++0xc78,0x621b001e, ++0xc78,0x621c001e, ++0xc78,0x621d001e, ++0xc78,0x621e001e, ++0xc78,0x621f001e, ++}; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c +new file mode 100644 +index 000000000000..55548130496c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c +@@ -0,0 +1,2557 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/*Created on 2011/11/ 8, 14:15*/ ++ ++#include ++#include "Hal8192CUHWImg_wowlan.h" ++ ++ ++u8 Rtl8192CUFwTSMCWWImgArray[TSMCWWImgArrayLength] = { ++0xc1,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x43,0x72,0x34,0x00,0x00, ++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x57,0xcb,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x5c,0xb6,0x00,0x00,0x00,0x00,0x00,0x02,0x5d,0x99,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5, ++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8, ++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08, ++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8, ++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5, ++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb, ++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee, ++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0, ++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83, ++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0, ++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0, ++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4, ++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5, ++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf, ++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3, ++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0, ++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb, ++0x02,0x50,0x2a,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2, ++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33, ++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf, ++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e, ++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93, ++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3, ++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca, ++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe, ++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80, ++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00, ++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91, ++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12, ++0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74, ++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4, ++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06, ++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c, ++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05, ++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42, ++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82, ++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80, ++0xed,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x54,0xfe,0xf0,0x02,0x50,0xd6,0x22,0xe4, ++0xf5,0x75,0x22,0x02,0x5f,0xe2,0x02,0x5f,0xe9,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26, ++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5, ++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce, ++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54, ++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c, ++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce, ++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04, ++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01, ++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3, ++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25, ++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x2a,0x8b,0x00,0x00,0x00, ++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71, ++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91, ++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27, ++0xde,0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc, ++0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90, ++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60, ++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0, ++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74, ++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf, ++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab, ++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60, ++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x29,0xd9,0xff,0x90,0x91, ++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61, ++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91, ++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f, ++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x1c,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b, ++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d, ++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21, ++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1, ++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0, ++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef, ++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30, ++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x62,0x65,0xe5,0x6e,0x30,0xe3, ++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x5a,0x3f,0xef,0x60,0x53,0x80,0x52, ++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02, ++0x62,0x4a,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3, ++0x08,0x12,0x5a,0x3f,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04, ++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x5b,0xb3,0xef,0x60,0x13,0x12,0x48, ++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x63, ++0x56,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01, ++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15, ++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x61,0xa3,0x90, ++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4, ++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22, ++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0, ++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff, ++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5, ++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91, ++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0, ++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10, ++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3, ++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09, ++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3, ++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80, ++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x68,0x87,0x22,0x90,0x01, ++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x46,0xef,0x70,0x06, ++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0xe5,0x70,0x60, ++0x04,0x7f,0x01,0x11,0xb3,0x51,0x0c,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef,0x64, ++0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36, ++0x75,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x36,0xe6,0x7d,0x10,0x7f, ++0x03,0x12,0x36,0x92,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x12, ++0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a, ++0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d, ++0x7b,0xff,0x12,0x36,0xe6,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0x7d,0x10,0x7f,0x03, ++0x12,0x36,0x92,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07, ++0xf0,0x12,0x64,0x11,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22,0x8b, ++0x0e,0x8a,0x0f,0x89,0x10,0x12,0x62,0x3e,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x29, ++0xd9,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40, ++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20, ++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02, ++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9, ++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xfe, ++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80, ++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91, ++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x7f,0x78,0x7e,0x08, ++0x12,0x27,0xde,0x90,0x90,0xd8,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde, ++0x90,0x90,0xdc,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0xe0, ++0x12,0x2a,0x7f,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43,0x09, ++0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54,0xc7, ++0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90, ++0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44,0x02, ++0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x7f, ++0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xe4,0x12,0x2a,0x7f,0x90,0x80,0x85,0x12, ++0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59, ++0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91,0x51, ++0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd, ++0x7f,0x01,0x12,0x34,0x81,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80,0x08,0xf4,0xff, ++0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf, ++0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b, ++0xed,0xf0,0x90,0x91,0x9a,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f, ++0xf0,0x51,0xe6,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3, ++0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x9b,0xe0, ++0x60,0x16,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90, ++0x91,0x9a,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3, ++0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x51,0xde,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51, ++0xe6,0x90,0x91,0x9b,0xe0,0x60,0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f, ++0x80,0x1a,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x51,0xe6,0xd0, ++0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x51,0xe6,0xd0,0xd0, ++0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0x81,0xaa, ++0x90,0x90,0xf3,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71, ++0xee,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x45,0xe0, ++0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12, ++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90, ++0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x54,0xef, ++0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38, ++0x90,0x90,0xf3,0x74,0x01,0xf0,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd, ++0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x71,0xee,0x90, ++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x71,0xee,0x22,0x90,0x00,0x02,0x12,0x42, ++0x20,0x90,0x90,0xf5,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90, ++0x90,0xf4,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05, ++0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05, ++0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf, ++0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x12,0x6e,0x67, ++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xa1,0xb2, ++0x90,0x90,0xf4,0xe0,0x70,0x02,0xa1,0xb2,0x90,0x90,0xf8,0xe0,0x70,0x02,0xa1,0xb2, ++0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0, ++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x71,0xe5,0x90,0x00,0x46,0xe0,0x44,0x01, ++0xfd,0x7f,0x46,0x71,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06, ++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x71, ++0xee,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0, ++0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0, ++0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0, ++0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x37,0x00, ++0x80,0x2b,0x90,0x90,0xf5,0xe0,0x70,0x2d,0x90,0x91,0x07,0x71,0xe4,0x90,0x00,0x46, ++0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x71,0xee,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33, ++0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x36,0x92,0x90,0x91,0x1c, ++0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12, ++0x42,0x20,0x90,0x90,0xf6,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0, ++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0xef,0x12,0x2a,0x7f,0xab,0x0e,0xaa, ++0x0f,0xa9,0x10,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a, ++0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43, ++0x09,0xec,0x54,0x03,0xfc,0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x2a,0x7f,0x90,0x05, ++0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27, ++0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x2a,0x7f,0x90, ++0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12, ++0x2f,0xd9,0x90,0x90,0xf6,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x71,0xee,0x90, ++0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10, ++0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x48, ++0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f, ++0x46,0x71,0xee,0xe4,0x90,0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3, ++0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54, ++0x71,0xee,0x7d,0xff,0x7f,0x55,0x71,0xee,0x7d,0xff,0x7f,0x56,0x71,0xee,0x7d,0xff, ++0x7f,0x57,0x61,0xee,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90, ++0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x71,0xee,0xe4,0xfd, ++0x7f,0x51,0x71,0xee,0xe4,0xfd,0x7f,0x52,0x71,0xee,0xe4,0xfd,0x7f,0x53,0x61,0xee, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x22,0xed,0xf0,0x90,0x91,0x21,0xef, ++0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74, ++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0, ++0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90, ++0x00,0x46,0x80,0x59,0x90,0x91,0x21,0xe0,0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90, ++0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4, ++0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0, ++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff, ++0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0, ++0x51,0xe6,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0, ++0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x71,0xee,0x90,0x91,0x9f,0xe0,0x44,0xb0, ++0xfd,0x7f,0x49,0x61,0xee,0x12,0x47,0xe6,0xbf,0x01,0x10,0x90,0x02,0x09,0xe0,0xff, ++0x7d,0x01,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x75,0x28,0x33,0xe4, ++0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29, ++0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3, ++0xf0,0x75,0x8e,0x02,0xf1,0x25,0xd1,0xe8,0x90,0x91,0x4f,0xef,0xf0,0xf1,0x0b,0x90, ++0x91,0x51,0xef,0xf0,0xf1,0x60,0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5, ++0x57,0xf1,0x02,0x12,0x61,0xc4,0x12,0x32,0x3d,0x12,0x44,0xff,0x11,0x0c,0xf1,0x36, ++0xd1,0xfb,0xd1,0xd0,0x12,0x44,0xfe,0x31,0x13,0x12,0x44,0xf4,0x12,0x6e,0x09,0x90, ++0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4e,0xb9,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40, ++0xf0,0x12,0x4a,0xe6,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0, ++0x64,0x01,0xf0,0x24,0x2a,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30, ++0xe2,0x10,0x12,0x5f,0xf0,0xbf,0x01,0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12, ++0x71,0x97,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x60, ++0x2d,0x90,0x90,0xf7,0xe0,0x70,0x03,0x12,0x70,0x74,0x11,0xe7,0x90,0x91,0x3f,0xe0, ++0x90,0x01,0xba,0xf0,0x80,0xb6,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54, ++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b, ++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x67,0xe4,0xbf,0x01,0x09, ++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xe1,0x17,0xe4,0x90,0x06, ++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01, ++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91, ++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0, ++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8, ++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe, ++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef, ++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x29,0xd9,0x54,0x01,0xff,0x90,0x91,0x56, ++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90, ++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a, ++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57, ++0x04,0x7d,0x08,0xe4,0xff,0x12,0x36,0xe6,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x36, ++0x75,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x31,0xf1,0x31,0x13,0xd0,0xd0,0x92,0xaf, ++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x5a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12, ++0x43,0x4a,0x52,0x30,0x01,0x52,0x39,0x02,0x52,0x5b,0x03,0x52,0x64,0x09,0x52,0x6c, ++0x0c,0x52,0x75,0x0d,0x52,0x7d,0x0e,0x52,0x8e,0x1a,0x52,0x96,0x2c,0x52,0x41,0x2d, ++0x52,0x4a,0x2e,0x52,0x9e,0x30,0x52,0x53,0x3b,0x52,0x86,0x3c,0x00,0x00,0x52,0xa6, ++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0x72,0x90,0x91,0x19,0x12,0x43,0x21,0xc1, ++0xf5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0x8d,0x90,0x91,0x19,0x12,0x43,0x21, ++0x02,0x65,0xd5,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x4b,0x90,0x91,0x19,0x12,0x43, ++0x21,0x02,0x66,0x0e,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12, ++0x43,0x21,0x02,0x4c,0xab,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x98,0x90,0x91,0x19, ++0x12,0x43,0x21,0x02,0x4d,0xe6,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0x90,0x90,0x91, ++0x19,0x12,0x43,0x21,0xa1,0x9b,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x7a,0x90,0x91, ++0x19,0x12,0x43,0x21,0xe1,0x78,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43, ++0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe, ++0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12, ++0x29,0xd9,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00, ++0x01,0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91, ++0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x26,0x80, ++0x10,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0x65,0x72,0x60,0x03,0x12,0x44, ++0xe8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72, ++0x01,0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x12,0x4f,0x10,0xe4,0xfd,0x7f,0x02, ++0x12,0x4f,0x10,0x71,0x6a,0xe4,0xff,0x71,0xcc,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5, ++0x76,0xf0,0x90,0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5, ++0x45,0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x7f,0x0b,0x71,0xd9,0xef,0x65, ++0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05,0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01, ++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe5,0x72,0x64,0x01,0x70,0x3f,0x71,0x6a,0xbf,0x01, ++0x04,0x7f,0x01,0x71,0xcc,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x12,0x4b, ++0xee,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x12,0x4b,0xee,0x90,0x00,0x46, ++0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x7f,0x02,0x71,0xd9,0x8f,0x76,0x90, ++0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01,0x03,0x12,0x4f,0xd7,0x22,0x90,0x01,0xca,0xe5, ++0x75,0xf0,0xef,0x60,0x03,0x12,0x4f,0xd7,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12, ++0x4a,0xe6,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef, ++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80, ++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4a,0xde,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e, ++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00, ++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13, ++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5,0x15,0x90,0x02,0x09, ++0xe0,0xff,0x12,0x29,0xd9,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0,0x08,0x75,0x0e,0x00, ++0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10,0x2d,0xff,0x24,0x01, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0,0x74,0x02,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24,0x03,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91,0x48,0xf0,0xa3,0xef, ++0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5, ++0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xee,0xf0,0x0f, ++0xbf,0x08,0xe0,0x12,0x66,0x56,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3, ++0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10, ++0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f,0x0a,0x7e,0x00,0x12, ++0x37,0x54,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe, ++0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78,0x23,0xe4,0xf5,0x10, ++0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e,0xf5,0x0f,0x80,0x06, ++0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06, ++0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02,0x15,0x11,0xe5,0x12, ++0x45,0x11,0x60,0x02,0x81,0xb8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1c,0x12,0x43, ++0x41,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfe,0x4e,0xf0, ++0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x02,0xfe, ++0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff,0xe0,0x54,0xf7,0x4f, ++0xf0,0x12,0x29,0xd9,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xef,0x4e,0xf0, ++0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x40,0xfe, ++0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff,0xe0,0x54,0x7f,0x4f, ++0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90,0x00,0x01,0x12,0x42, ++0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0x54,0x01,0xfe,0x90, ++0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0,0x54,0xfd,0x4f,0xf0, ++0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61,0xe0,0x54,0xfb,0x4f, ++0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90,0x91,0x5e,0xe0,0xff, ++0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0,0x54,0x01,0x90,0x01, ++0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x29,0xd9,0x20,0xe0,0x02,0x21,0xf1,0xe4,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0xff,0xc3, ++0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef,0x13,0x13,0x54,0x3f, ++0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x29,0xd9,0x13,0x13,0x13, ++0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0,0x90,0x91,0x61,0xe0, ++0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0, ++0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22, ++0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3, ++0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01, ++0x60,0x02,0x7f,0x00,0x22,0x12,0x29,0xd9,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0, ++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f, ++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80, ++0xfd,0x7f,0x80,0x02,0x4b,0xee,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41, ++0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x29,0xd9,0x60,0x02, ++0x80,0x01,0xe4,0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22, ++0x90,0x91,0x51,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd, ++0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90, ++0x91,0x53,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01, ++0x12,0x42,0x20,0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90, ++0xf7,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2, ++0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4b,0xee,0x7d,0x40,0x7f, ++0x01,0x12,0x36,0xaf,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0, ++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03, ++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xcb,0xf0,0x74,0x57, ++0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a, ++0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5,0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34, ++0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90, ++0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0, ++0x51,0x30,0xef,0x64,0x01,0x70,0x30,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90, ++0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b, ++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x91,0x37,0xf0,0x80,0x08,0x51, ++0x30,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74, ++0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5, ++0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0x5c,0xe5,0x2c,0x30,0xe3, ++0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57, ++0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5, ++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90, ++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4e,0xe4,0x90,0x00, ++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4a,0xe6,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90, ++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x13,0x90,0x91,0x50,0x74,0x01,0xf0, ++0x90,0x01,0x36,0xf0,0x91,0x23,0x51,0x87,0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30, ++0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54, ++0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37,0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90, ++0x91,0x40,0xe4,0xf0,0x80,0x18,0x90,0x91,0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a, ++0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x4f,0xf5,0xe5,0x2e, ++0x30,0xe2,0x19,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05, ++0x58,0x74,0x03,0xf0,0x51,0xd8,0x90,0x91,0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3, ++0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60, ++0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4, ++0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01, ++0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01,0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57, ++0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd, ++0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01, ++0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01,0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b, ++0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8,0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30, ++0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60, ++0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30, ++0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x71,0x7e,0x74,0xcb,0x04,0x90,0x01,0xc4, ++0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0, ++0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32, ++0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0x51, ++0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x91, ++0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x91,0x36,0xe0, ++0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54,0x0f,0xd3,0x94, ++0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01, ++0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d, ++0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04,0xf0,0xe5,0x70,0x64,0x03,0x60,0x05, ++0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0,0xff,0x74,0x01,0xd3,0x9f,0x50,0x14, ++0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b,0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4, ++0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff,0x90,0x91,0x54,0xe0,0xb5,0x07,0x07, ++0x71,0x4e,0xe4,0x90,0x91,0x55,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70, ++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06, ++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91, ++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff, ++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90, ++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd, ++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71, ++0x42,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe5,0x6e, ++0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91,0x08,0xe0, ++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58, ++0x90,0x91,0x71,0x12,0x43,0x41,0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0x90,0x91, ++0x80,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80, ++0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d,0xe5,0x6e,0x54, ++0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0xe4,0xff,0x12, ++0x48,0xb3,0x22,0x51,0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0, ++0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a, ++0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80, ++0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71, ++0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60, ++0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90, ++0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0, ++0x7f,0x00,0x22,0xe4,0xfb,0x90,0x91,0x78,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5, ++0x70,0x70,0x02,0x81,0xb5,0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b, ++0x24,0xfd,0x60,0x27,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0, ++0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90, ++0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45, ++0x43,0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4, ++0xff,0x90,0x91,0x34,0xe0,0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5, ++0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90, ++0x91,0x2e,0xe0,0x60,0x10,0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d, ++0xf0,0x22,0x74,0x09,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0, ++0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0, ++0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0x53,0x91,0xef, ++0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0, ++0xff,0x90,0x00,0x56,0xe0,0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55, ++0x74,0x10,0xf0,0xe5,0x3d,0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d, ++0x30,0xe6,0x1b,0x90,0x00,0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x0b,0x90,0x90,0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4c,0x03,0xe5,0x3d, ++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4c,0x03,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56, ++0x74,0x01,0xf0,0xe5,0x3e,0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e, ++0x30,0xe2,0x06,0x90,0x00,0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00, ++0x56,0x74,0x08,0xf0,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0xd0,0x07, ++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0, ++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0, ++0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04, ++0xc0,0x05,0xc0,0x06,0xc0,0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0x99,0xf0,0x74, ++0x5d,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0, ++0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37, ++0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08, ++0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0x57,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c, ++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90, ++0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44, ++0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90, ++0x91,0x37,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74, ++0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91, ++0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59, ++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91, ++0x36,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10, ++0xf0,0x12,0x53,0x86,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12, ++0x6e,0xb9,0xe5,0x35,0x30,0xe0,0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f, ++0xe0,0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80, ++0x1c,0xe5,0x0d,0xb4,0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05, ++0x90,0x00,0x83,0x80,0x08,0xe5,0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f, ++0x80,0x06,0x90,0x01,0xbe,0xe0,0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f, ++0x30,0xe0,0x03,0xa3,0x80,0x03,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xf1,0x38,0x12,0x44, ++0xc2,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0, ++0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74, ++0x02,0xf0,0x74,0x99,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5d,0xa3,0xf0,0xd0,0x07,0xd0, ++0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0, ++0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xe5,0x6f,0x30,0xe6,0x19,0xe5,0x6f,0x54, ++0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90, ++0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70,0x70,0x02, ++0xe1,0xe1,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54, ++0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef,0x90,0x91, ++0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee, ++0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef, ++0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06, ++0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f,0xff,0xe4, ++0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40, ++0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44, ++0xc2,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24,0x8d,0x25,0x22, ++0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1,0x2c,0xc3,0x90, ++0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a,0x90,0x01,0xc6, ++0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0,0x01,0x12,0x42, ++0x81,0x7f,0x01,0x7e,0x00,0x12,0x37,0x54,0x80,0xcd,0x7f,0x01,0x22,0x90,0x01,0xcc, ++0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70,0x02,0x21,0x6f, ++0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33, ++0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x21,0x68,0x90,0x91,0x9c,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12,0xf0,0x75,0x63, ++0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a,0x91,0x79,0x13, ++0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90,0x91, ++0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x15,0xe0,0x90, ++0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43,0x15, ++0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12, ++0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01, ++0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04, ++0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33,0xe0,0x75,0xf0, ++0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91, ++0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0, ++0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x51,0xf8,0x90,0x91,0x11, ++0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x91,0x9c,0xe0, ++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x37,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22, ++0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0, ++0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5, ++0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0, ++0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f,0x0c,0x75,0x6e, ++0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0,0x90,0x91,0x39, ++0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x29,0xf0,0x90, ++0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32,0xf0,0xa3,0x74, ++0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74, ++0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0,0x90,0x91,0x25, ++0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0,0x90,0x91,0x26, ++0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0,0x22,0xe4,0x90, ++0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x90,0x06,0x04,0xe0,0x54,0xbf, ++0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53,0x6e, ++0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x51,0x7e,0x90,0x91,0x9d,0xe0, ++0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90,0x00, ++0x11,0xe0,0x44,0x09,0xf0,0x12,0x4a,0xe6,0x90,0x90,0xd8,0x12,0x43,0x09,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xdc,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90, ++0xe0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f, ++0xd9,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd, ++0xff,0x12,0x34,0x81,0x90,0x91,0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a, ++0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0x8f,0x77,0xe4, ++0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f, ++0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91,0x97,0xe0,0x94,0x88,0x90,0x91,0x96, ++0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90,0x91,0x96, ++0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x37,0x54,0xd3,0x90, ++0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0,0x94,0x00,0x40,0xb9,0x90,0x01,0xc7, ++0xe0,0x30,0xe0,0xb2,0x22,0x22,0x53,0x6e,0xf0,0x43,0x6e,0x01,0x71,0x55,0x71,0x67, ++0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x22,0x8f,0x78,0x12,0x47,0xe6,0xef,0x64,0x01, ++0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5,0x78,0x60,0x10,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0, ++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x60, ++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43, ++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff, ++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01, ++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f, ++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07, ++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0, ++0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01, ++0xc3,0xc0,0xd0,0x90,0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0, ++0x90,0x91,0x84,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90, ++0x91,0x87,0xe0,0x94,0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6, ++0xe0,0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12, ++0x42,0x81,0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92, ++0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90, ++0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90, ++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90, ++0x91,0x25,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0, ++0xef,0xc3,0x13,0x54,0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff, ++0x13,0x13,0x54,0x01,0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70, ++0x26,0x12,0x2a,0x8b,0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f,0x12,0x2a, ++0x8b,0x00,0x00,0x03,0x10,0x80,0x24,0x12,0x2a,0x8b,0x00,0x00,0x01,0x10,0x90,0x91, ++0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f, ++0xd9,0x90,0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91, ++0x26,0xe0,0x70,0x3d,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27, ++0xde,0x90,0x91,0x1f,0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02, ++0xfc,0x90,0x91,0x1f,0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb, ++0xf0,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x49,0x7f,0x90,0x01,0xe5,0xe5,0x70,0xf0, ++0x90,0x91,0x3b,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02, ++0x12,0x42,0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x91,0x2f,0xf0,0x90,0x00, ++0x01,0x12,0x42,0x20,0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d, ++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74, ++0x0a,0xf0,0x90,0x91,0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91, ++0x35,0x74,0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90, ++0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32,0xe4,0xf0,0xa3, ++0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32,0xe4,0xf0,0xa3, ++0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x02, ++0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91,0x41,0xf0,0x90, ++0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90,0x00,0x02,0x12, ++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff, ++0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed, ++0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x47, ++0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0,0xf5,0x1a,0xe4, ++0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xe0,0xff,0x74, ++0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5,0x90,0x91,0x1d, ++0xe0,0x12,0x43,0x4a,0x66,0xb3,0x00,0x67,0xdc,0x01,0x66,0xba,0x02,0x66,0xba,0x03, ++0x66,0xba,0x04,0x67,0xdc,0x05,0x67,0xac,0x80,0x67,0xc2,0x81,0x67,0xdc,0x82,0x00, ++0x00,0x67,0xd8,0xaf,0x1e,0x12,0x73,0xea,0xe1,0xdc,0x90,0x91,0x1d,0xe0,0xff,0xb4, ++0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90,0x91,0x1c,0xb4,0x03, ++0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19,0x94,0x08,0x50,0x49, ++0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f,0x40,0x02,0xe1,0xdc, ++0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a,0xff,0xc3,0x74,0x03,0x95, ++0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4b,0xee,0x80,0x1a,0xc3,0x74,0x03,0x95,0x16, ++0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a,0xfd,0xec,0x35,0x19,0x8d, ++0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xba,0xc3,0xe5,0x19,0x94,0x10,0x40,0x02, ++0xe1,0xdc,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x02,0xe1,0xdc,0xaf,0x1c,0xfc,0xfd, ++0xfe,0x78,0x10,0x12,0x2a,0x6c,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b, ++0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x2a,0x6c,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0, ++0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc, ++0xfd,0xfe,0x78,0x08,0x12,0x2a,0x6c,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12, ++0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe, ++0x12,0x42,0xfc,0xa3,0x12,0x2a,0x7f,0x90,0x91,0x1e,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0xaf,0x1a,0xae,0x19,0x12,0x2f,0xd9,0x80,0x30,0xe5,0x1d,0x7f,0x00, ++0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x37,0x54, ++0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17, ++0xaf,0x18,0xfe,0x12,0x36,0xcb,0x80,0x04,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0, ++0x92,0xaf,0x22,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10,0x8a,0x11,0x89,0x12,0xe4,0x90, ++0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4a,0xe6,0xe5,0x0e,0x54,0x03,0xff, ++0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x54, ++0x7f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x91,0x11,0xe0, ++0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x91,0x11,0xe0,0xc3,0x94, ++0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa,0x11,0xa9,0x12,0x12,0x42,0x4d, ++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98,0xf0,0xa3,0xf0,0x90,0x05,0xf8, ++0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f, ++0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90,0x91,0x98,0xe0,0x94,0x03,0x40, ++0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x91,0x98,0xe4,0x75, ++0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0xef,0x70,0x02,0x41,0x3d,0x90,0x90,0xe8,0xe0, ++0x60,0x02,0xc1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x84,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x88, ++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x98,0x12,0x43,0x09,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x9c,0x12, ++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xb0,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90, ++0xb4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc4,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xc8, ++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9, ++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09, ++0x12,0x2f,0xd9,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x04,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8, ++0xe0,0x64,0x01,0x60,0x02,0xc1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90, ++0xd4,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x80,0x12,0x2a, ++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x84,0x12,0x2a,0x7f,0x7f,0x6c, ++0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x88,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12, ++0x27,0xde,0x90,0x90,0x8c,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90, ++0x90,0x90,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x94,0x12, ++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x98,0x12,0x2a,0x7f,0x7f, ++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x9c,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e, ++0x12,0x27,0xde,0x90,0x90,0xa0,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde, ++0x90,0x90,0xa4,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xa8, ++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xac,0x12,0x2a,0x7f, ++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xb0,0x12,0x2a,0x7f,0x7f,0xd8,0x7e, ++0x0e,0x12,0x27,0xde,0x90,0x90,0xb4,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27, ++0xde,0x90,0x90,0xb8,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90, ++0xbc,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xc0,0x12,0x2a, ++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x90,0xc4,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x0d,0x12,0x27,0xde,0x90,0x90,0xc8,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12, ++0x27,0xde,0x90,0x90,0xcc,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90, ++0x90,0xd0,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12, ++0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88, ++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00, ++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25, ++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb, ++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20, ++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b, ++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a, ++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12, ++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85, ++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80, ++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f, ++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4, ++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88, ++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90, ++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90, ++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd, ++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09, ++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91, ++0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f, ++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91, ++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90, ++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f, ++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08, ++0x12,0x2f,0xd9,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4b,0xee, ++0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0,0x90, ++0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0,0x90, ++0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90, ++0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0,0x90, ++0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0,0x44, ++0xc0,0xfd,0x7f,0x51,0x02,0x4b,0xee,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0,0x90, ++0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0,0x90, ++0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04,0xe0, ++0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0, ++0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0,0x04, ++0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60, ++0x02,0xe1,0x6e,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x90, ++0x91,0x07,0xe0,0x70,0x32,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06, ++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x90,0xf4,0xe0,0xff,0xd1,0x67,0x90,0x91,0x07, ++0x74,0x01,0x12,0x4b,0xe4,0x80,0x40,0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90, ++0x90,0xf8,0xe0,0xff,0xd1,0x67,0xe4,0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44, ++0x01,0xfd,0x7f,0x45,0x12,0x4b,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef, ++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9, ++0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91, ++0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91, ++0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90, ++0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x06,0xe0,0x04,0xf0,0x02,0x70,0x29,0x90,0x90, ++0xee,0xe0,0x64,0x14,0x60,0x03,0x02,0x70,0x29,0x90,0x90,0xfd,0xe0,0x70,0x25,0x90, ++0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91,0x01,0xe0,0x70, ++0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07,0x90,0x04,0xfd, ++0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90,0x90,0xfe,0xe0, ++0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90, ++0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04,0x49,0xf0,0x90, ++0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9,0xe0,0x90,0x04, ++0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb,0xe0,0x90,0x04, ++0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90,0xee,0xf0,0x90, ++0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90,0xfd,0xf0,0xa3, ++0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x8c, ++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x8e, ++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0,0xff,0x90,0x91, ++0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e,0xd3,0x94,0x01, ++0x40,0x11,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90,0xf8,0xe0,0xff, ++0x12,0x6e,0x67,0x22,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08,0x90,0x90,0xf5,0xe0, ++0x60,0x02,0x21,0x4b,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0, ++0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80, ++0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x90, ++0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0, ++0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9,0xf0,0x90,0x00,0x44, ++0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd,0xe0,0xc3,0x94,0xff, ++0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3,0x94,0xff,0x50,0x06, ++0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0, ++0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90,0x00,0x44,0xe0,0x30, ++0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24, ++0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90, ++0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x01,0xf0, ++0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x90,0x06,0x90,0xe0, ++0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f,0xe0,0xff,0x90, ++0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4a,0xf6,0x90,0x91,0x60,0xe0, ++0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x37,0x54,0x90,0x91,0x5e,0xe0,0xc4,0x13, ++0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0, ++0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0x90, ++0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90,0x01,0x1f,0xe0, ++0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,0x11,0xf0, ++0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91,0x56,0xe0,0x20, ++0xe0,0x02,0x61,0xc4,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0,0xff,0x90,0x91, ++0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xc4,0x90,0x91,0x11,0xe0,0xfc,0xa3,0xe0,0xfd, ++0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02,0x2d,0xf5,0x82, ++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54,0xf8,0xff,0xed, ++0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0xfb, ++0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x7a, ++0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91,0x13,0xf0,0xa3, ++0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4,0x35,0xf0,0xfe, ++0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0,0xff,0xad,0x03, ++0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0,0x24,0x00,0xf5, ++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19,0x74,0x02,0xf0, ++0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea,0x8f,0xf0,0x12, ++0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11,0xe0,0xfc,0xa3, ++0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24,0x01,0xff,0x90, ++0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90,0x91,0x11,0xf0, ++0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24,0x20,0x70,0x27, ++0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0,0x02,0x61,0x9c, ++0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0,0x44,0x08,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x61,0x95,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x13,0x54,0x03, ++0x20,0xe0,0x02,0x61,0x9c,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5,0x82,0xe4,0x34, ++0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19,0xe0,0xfe,0xef, ++0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0, ++0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x64, ++0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f,0xff,0x90,0x91, ++0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83, ++0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0,0x44,0x02,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90,0x91,0x56,0xe0, ++0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x4c,0x71,0xc9,0xbf,0x01, ++0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90,0x91,0x17,0xe0, ++0x04,0xf0,0x21,0xd9,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0,0xc4,0x13,0x13, ++0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e,0xe0,0xc4,0x54, ++0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4,0x90,0x91,0x22, ++0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04, ++0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x1f,0x14,0xff, ++0x7d,0xff,0x12,0x34,0xb7,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91,0x22,0xe0,0xc3, ++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04, ++0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x34,0xb7,0xc3,0xee,0x94,0x01,0x40,0x0a, ++0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee,0x94,0x01,0x40, ++0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5,0x05,0x07,0x90, ++0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4,0x2f,0xff,0x22, ++0x0f,0x75,}; ++ ++u8 Rtl8192CUFwUMCACutWWImgArray[UMCACutWWImgArrayLength] = { ++0xc1,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x44,0x72,0x34,0x01,0x00, ++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x57,0xcb,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x5c,0xb6,0x00,0x00,0x00,0x00,0x00,0x02,0x5d,0x99,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5, ++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8, ++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08, ++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8, ++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5, ++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb, ++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee, ++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0, ++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83, ++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0, ++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0, ++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4, ++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5, ++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf, ++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3, ++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0, ++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb, ++0x02,0x50,0x2a,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2, ++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33, ++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf, ++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e, ++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93, ++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3, ++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca, ++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe, ++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80, ++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00, ++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91, ++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12, ++0x30,0x62,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74, ++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4, ++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06, ++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c, ++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05, ++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42, ++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82, ++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80, ++0xed,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x54,0xfe,0xf0,0x02,0x50,0xd6,0x22,0xe4, ++0xf5,0x75,0x22,0x02,0x5f,0xe2,0x02,0x5f,0xe9,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26, ++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5, ++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce, ++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54, ++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c, ++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce, ++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04, ++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01, ++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3, ++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25, ++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x25,0x14,0x00,0x00,0x00, ++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71, ++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91, ++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x22, ++0x65,0x90,0x91,0x09,0x12,0x25,0x08,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc, ++0x90,0x91,0x09,0x12,0x25,0x08,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x96,0x12,0x25, ++0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90, ++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60, ++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0, ++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74, ++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf, ++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab, ++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60, ++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x24,0x62,0xff,0x90,0x91, ++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61, ++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91, ++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f, ++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x1c,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b, ++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d, ++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21, ++0x12,0x24,0x62,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1, ++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0, ++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef, ++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30, ++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x62,0x65,0xe5,0x6e,0x30,0xe3, ++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x5a,0x3f,0xef,0x60,0x53,0x80,0x52, ++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02, ++0x62,0x4a,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3, ++0x08,0x12,0x5a,0x3f,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04, ++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x5b,0xb3,0xef,0x60,0x13,0x12,0x48, ++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x63, ++0x56,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01, ++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15, ++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x61,0xa3,0x90, ++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4, ++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22, ++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0, ++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff, ++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5, ++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91, ++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0, ++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10, ++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3, ++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09, ++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3, ++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80, ++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x68,0x87,0x22,0x90,0x01, ++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x46,0xef,0x70,0x06, ++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0xe5,0x70,0x60, ++0x04,0x7f,0x01,0x11,0xb3,0x51,0x0c,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef,0x64, ++0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x31,0x2c,0x7d,0x02,0x7f,0x03,0x12,0x31, ++0x2c,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x31,0x9d,0x7d,0x10,0x7f, ++0x03,0x12,0x31,0x49,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x12, ++0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a, ++0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d, ++0x7b,0xff,0x12,0x31,0x9d,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0x7d,0x10,0x7f,0x03, ++0x12,0x31,0x49,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07, ++0xf0,0x12,0x64,0x11,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22,0x8b, ++0x0e,0x8a,0x0f,0x89,0x10,0x12,0x62,0x3e,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x24, ++0x62,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40, ++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20, ++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02, ++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9, ++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xfe, ++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80, ++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91, ++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x7f,0x78,0x7e,0x08, ++0x12,0x22,0x65,0x90,0x90,0xd8,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65, ++0x90,0x90,0xdc,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0xe0, ++0x12,0x25,0x08,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43,0x09, ++0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54,0xc7, ++0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90, ++0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44,0x02, ++0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x7f, ++0x70,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xe4,0x12,0x25,0x08,0x90,0x80,0x96,0x12, ++0x25,0x14,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x68, ++0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x30,0x2c,0x90,0x91,0x51, ++0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd, ++0x7f,0x01,0x12,0x30,0x2c,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80,0x08,0xf4,0xff, ++0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf, ++0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b, ++0xed,0xf0,0x90,0x91,0x9a,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01, ++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f, ++0xf0,0x51,0xe6,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3, ++0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x9b,0xe0, ++0x60,0x16,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90, ++0x91,0x9a,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3, ++0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x51,0xde,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51, ++0xe6,0x90,0x91,0x9b,0xe0,0x60,0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f, ++0x80,0x1a,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x51,0xe6,0xd0, ++0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x51,0xe6,0xd0,0xd0, ++0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0x81,0xaa, ++0x90,0x90,0xf3,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71, ++0xee,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x45,0xe0, ++0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12, ++0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90, ++0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x54,0xef, ++0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38, ++0x90,0x90,0xf3,0x74,0x01,0xf0,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd, ++0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x71,0xee,0x90, ++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x71,0xee,0x22,0x90,0x00,0x02,0x12,0x42, ++0x20,0x90,0x90,0xf5,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90, ++0x90,0xf4,0xf0,0x12,0x24,0x62,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05, ++0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05, ++0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf, ++0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x12,0x6e,0x67, ++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xa1,0xb2, ++0x90,0x90,0xf4,0xe0,0x70,0x02,0xa1,0xb2,0x90,0x90,0xf8,0xe0,0x70,0x02,0xa1,0xb2, ++0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0, ++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x71,0xe5,0x90,0x00,0x46,0xe0,0x44,0x01, ++0xfd,0x7f,0x46,0x71,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43, ++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06, ++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x71, ++0xee,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0, ++0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0, ++0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0, ++0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x31,0xb7, ++0x80,0x2b,0x90,0x90,0xf5,0xe0,0x70,0x2d,0x90,0x91,0x07,0x71,0xe4,0x90,0x00,0x46, ++0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x71,0xee,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33, ++0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x31,0x49,0x90,0x91,0x1c, ++0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12, ++0x42,0x20,0x90,0x90,0xf6,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0, ++0x7f,0x80,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0xef,0x12,0x25,0x08,0xab,0x0e,0xaa, ++0x0f,0xa9,0x10,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a, ++0x12,0x24,0xf5,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43, ++0x09,0xec,0x54,0x03,0xfc,0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x25,0x08,0x90,0x05, ++0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x22, ++0x65,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x25,0x08,0x90, ++0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12, ++0x2b,0x08,0x90,0x90,0xf6,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x71,0xee,0x90, ++0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10, ++0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x48, ++0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f, ++0x46,0x71,0xee,0xe4,0x90,0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3, ++0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54, ++0x71,0xee,0x7d,0xff,0x7f,0x55,0x71,0xee,0x7d,0xff,0x7f,0x56,0x71,0xee,0x7d,0xff, ++0x7f,0x57,0x61,0xee,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90, ++0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x71,0xee,0xe4,0xfd, ++0x7f,0x51,0x71,0xee,0xe4,0xfd,0x7f,0x52,0x71,0xee,0xe4,0xfd,0x7f,0x53,0x61,0xee, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x22,0xed,0xf0,0x90,0x91,0x21,0xef, ++0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74, ++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0, ++0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90, ++0x00,0x46,0x80,0x59,0x90,0x91,0x21,0xe0,0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90, ++0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4, ++0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0, ++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff, ++0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0, ++0x51,0xe6,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0, ++0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x71,0xee,0x90,0x91,0x9f,0xe0,0x44,0xb0, ++0xfd,0x7f,0x49,0x61,0xee,0x12,0x47,0xe6,0xbf,0x01,0x10,0x90,0x02,0x09,0xe0,0xff, ++0x7d,0x01,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x75,0x28,0x33,0xe4, ++0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29, ++0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3, ++0xf0,0x75,0x8e,0x02,0xf1,0x25,0xd1,0xe8,0x90,0x91,0x4f,0xef,0xf0,0xf1,0x0b,0x90, ++0x91,0x51,0xef,0xf0,0xf1,0x60,0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5, ++0x57,0xf1,0x02,0x12,0x61,0xc4,0x12,0x2e,0x01,0x12,0x44,0xff,0x11,0x0c,0xf1,0x36, ++0xd1,0xfb,0xd1,0xd0,0x12,0x44,0xfe,0x31,0x13,0x12,0x44,0xf4,0x12,0x6e,0x09,0x90, ++0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4e,0xb9,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40, ++0xf0,0x12,0x4a,0xe6,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0, ++0x64,0x01,0xf0,0x24,0x2a,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30, ++0xe2,0x10,0x12,0x5f,0xf0,0xbf,0x01,0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12, ++0x71,0x97,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x60, ++0x2d,0x90,0x90,0xf7,0xe0,0x70,0x03,0x12,0x70,0x74,0x11,0xe7,0x90,0x91,0x3f,0xe0, ++0x90,0x01,0xba,0xf0,0x80,0xb6,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54, ++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b, ++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x67,0xe4,0xbf,0x01,0x09, ++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xe1,0x17,0xe4,0x90,0x06, ++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01, ++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91, ++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0, ++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8, ++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe, ++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef, ++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x24,0x62,0x54,0x01,0xff,0x90,0x91,0x56, ++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90, ++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a, ++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57, ++0x04,0x7d,0x08,0xe4,0xff,0x12,0x31,0x9d,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x31, ++0x2c,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x31,0xf1,0x31,0x13,0xd0,0xd0,0x92,0xaf, ++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x5a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12, ++0x43,0x4a,0x52,0x30,0x01,0x52,0x39,0x02,0x52,0x5b,0x03,0x52,0x64,0x09,0x52,0x6c, ++0x0c,0x52,0x75,0x0d,0x52,0x7d,0x0e,0x52,0x8e,0x1a,0x52,0x96,0x2c,0x52,0x41,0x2d, ++0x52,0x4a,0x2e,0x52,0x9e,0x30,0x52,0x53,0x3b,0x52,0x86,0x3c,0x00,0x00,0x52,0xa6, ++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0x72,0x90,0x91,0x19,0x12,0x43,0x21,0xc1, ++0xf5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0x8d,0x90,0x91,0x19,0x12,0x43,0x21, ++0x02,0x65,0xd5,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x4b,0x90,0x91,0x19,0x12,0x43, ++0x21,0x02,0x66,0x0e,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12, ++0x43,0x21,0x02,0x4c,0xab,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x98,0x90,0x91,0x19, ++0x12,0x43,0x21,0x02,0x4d,0xe6,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0x90,0x90,0x91, ++0x19,0x12,0x43,0x21,0xa1,0x9b,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x7a,0x90,0x91, ++0x19,0x12,0x43,0x21,0xe1,0x78,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43, ++0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe, ++0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12, ++0x24,0x62,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00, ++0x01,0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91, ++0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x26,0x80, ++0x10,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x24,0x62,0x65,0x72,0x60,0x03,0x12,0x44, ++0xe8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72, ++0x01,0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x12,0x4f,0x10,0xe4,0xfd,0x7f,0x02, ++0x12,0x4f,0x10,0x71,0x6a,0xe4,0xff,0x71,0xcc,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5, ++0x76,0xf0,0x90,0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5, ++0x45,0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x30,0x62,0x7f,0x0b,0x71,0xd9,0xef,0x65, ++0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05,0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01, ++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe5,0x72,0x64,0x01,0x70,0x3f,0x71,0x6a,0xbf,0x01, ++0x04,0x7f,0x01,0x71,0xcc,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x12,0x4b, ++0xee,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x12,0x4b,0xee,0x90,0x00,0x46, ++0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x7f,0x02,0x71,0xd9,0x8f,0x76,0x90, ++0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01,0x03,0x12,0x4f,0xd7,0x22,0x90,0x01,0xca,0xe5, ++0x75,0xf0,0xef,0x60,0x03,0x12,0x4f,0xd7,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12, ++0x4a,0xe6,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef, ++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80, ++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4a,0xde,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e, ++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00, ++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13, ++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5,0x15,0x90,0x02,0x09, ++0xe0,0xff,0x12,0x24,0x62,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0,0x08,0x75,0x0e,0x00, ++0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10,0x2d,0xff,0x24,0x01, ++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0,0x74,0x02,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24,0x03,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91,0x48,0xf0,0xa3,0xef, ++0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5, ++0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xee,0xf0,0x0f, ++0xbf,0x08,0xe0,0x12,0x66,0x56,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3, ++0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10, ++0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f,0x0a,0x7e,0x00,0x12, ++0x32,0x15,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe, ++0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78,0x23,0xe4,0xf5,0x10, ++0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e,0xf5,0x0f,0x80,0x06, ++0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06, ++0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02,0x15,0x11,0xe5,0x12, ++0x45,0x11,0x60,0x02,0x81,0xb8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1c,0x12,0x43, ++0x41,0x12,0x24,0x62,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfe,0x4e,0xf0, ++0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x24,0x62,0xff,0x54,0x02,0xfe, ++0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff,0xe0,0x54,0xf7,0x4f, ++0xf0,0x12,0x24,0x62,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xef,0x4e,0xf0, ++0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x24,0x62,0xff,0x54,0x40,0xfe, ++0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff,0xe0,0x54,0x7f,0x4f, ++0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90,0x00,0x01,0x12,0x42, ++0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0x54,0x01,0xfe,0x90, ++0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0,0x54,0xfd,0x4f,0xf0, ++0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61,0xe0,0x54,0xfb,0x4f, ++0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90,0x91,0x5e,0xe0,0xff, ++0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0,0x54,0x01,0x90,0x01, ++0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x24,0x62,0x20,0xe0,0x02,0x21,0xf1,0xe4,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x24,0x62,0xff,0xc3, ++0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef,0x13,0x13,0x54,0x3f, ++0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x24,0x62,0x13,0x13,0x13, ++0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0,0x90,0x91,0x61,0xe0, ++0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0, ++0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22, ++0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3, ++0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01, ++0x60,0x02,0x7f,0x00,0x22,0x12,0x24,0x62,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0, ++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f, ++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80, ++0xfd,0x7f,0x80,0x02,0x4b,0xee,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41, ++0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x24,0x62,0x60,0x02, ++0x80,0x01,0xe4,0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22, ++0x90,0x91,0x51,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd, ++0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x24,0x62,0xff,0x54,0x01,0xfe,0x90, ++0x91,0x53,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01, ++0x12,0x42,0x20,0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90, ++0xf7,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2, ++0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4b,0xee,0x7d,0x40,0x7f, ++0x01,0x12,0x31,0x66,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0, ++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03, ++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xcb,0xf0,0x74,0x57, ++0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a, ++0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5,0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34, ++0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90, ++0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0, ++0x51,0x30,0xef,0x64,0x01,0x70,0x30,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90, ++0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b, ++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x91,0x37,0xf0,0x80,0x08,0x51, ++0x30,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74, ++0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5, ++0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0x5c,0xe5,0x2c,0x30,0xe3, ++0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57, ++0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5, ++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90, ++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4e,0xe4,0x90,0x00, ++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4a,0xe6,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90, ++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x13,0x90,0x91,0x50,0x74,0x01,0xf0, ++0x90,0x01,0x36,0xf0,0x91,0x23,0x51,0x87,0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30, ++0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54, ++0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37,0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90, ++0x91,0x40,0xe4,0xf0,0x80,0x18,0x90,0x91,0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a, ++0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x4f,0xf5,0xe5,0x2e, ++0x30,0xe2,0x19,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05, ++0x58,0x74,0x03,0xf0,0x51,0xd8,0x90,0x91,0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3, ++0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60, ++0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4, ++0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01, ++0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01,0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57, ++0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd, ++0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01, ++0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01,0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b, ++0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8,0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30, ++0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60, ++0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30, ++0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x71,0x7e,0x74,0xcb,0x04,0x90,0x01,0xc4, ++0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0, ++0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32, ++0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0x51, ++0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x91, ++0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x91,0x36,0xe0, ++0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54,0x0f,0xd3,0x94, ++0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01, ++0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d, ++0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04,0xf0,0xe5,0x70,0x64,0x03,0x60,0x05, ++0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0,0xff,0x74,0x01,0xd3,0x9f,0x50,0x14, ++0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b,0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4, ++0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff,0x90,0x91,0x54,0xe0,0xb5,0x07,0x07, ++0x71,0x4e,0xe4,0x90,0x91,0x55,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70, ++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06, ++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91, ++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff, ++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90, ++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd, ++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71, ++0x42,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe5,0x6e, ++0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91,0x08,0xe0, ++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58, ++0x90,0x91,0x71,0x12,0x43,0x41,0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0x90,0x91, ++0x80,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80, ++0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d,0xe5,0x6e,0x54, ++0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0xe4,0xff,0x12, ++0x48,0xb3,0x22,0x51,0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0, ++0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a, ++0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80, ++0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71, ++0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60, ++0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90, ++0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0, ++0x7f,0x00,0x22,0xe4,0xfb,0x90,0x91,0x78,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5, ++0x70,0x70,0x02,0x81,0xb5,0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b, ++0x24,0xfd,0x60,0x27,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0, ++0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90, ++0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45, ++0x43,0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4, ++0xff,0x90,0x91,0x34,0xe0,0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5, ++0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90, ++0x91,0x2e,0xe0,0x60,0x10,0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d, ++0xf0,0x22,0x74,0x09,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0, ++0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0, ++0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0x53,0x91,0xef, ++0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0, ++0xff,0x90,0x00,0x56,0xe0,0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55, ++0x74,0x10,0xf0,0xe5,0x3d,0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d, ++0x30,0xe6,0x1b,0x90,0x00,0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x0b,0x90,0x90,0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4c,0x03,0xe5,0x3d, ++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff, ++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4c,0x03,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56, ++0x74,0x01,0xf0,0xe5,0x3e,0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e, ++0x30,0xe2,0x06,0x90,0x00,0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00, ++0x56,0x74,0x08,0xf0,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0xd0,0x07, ++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0, ++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0, ++0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04, ++0xc0,0x05,0xc0,0x06,0xc0,0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0x99,0xf0,0x74, ++0x5d,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0, ++0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37, ++0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08, ++0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0x57,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c, ++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90, ++0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44, ++0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90, ++0x91,0x37,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74, ++0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91, ++0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59, ++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91, ++0x36,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10, ++0xf0,0x12,0x53,0x86,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12, ++0x6e,0xb9,0xe5,0x35,0x30,0xe0,0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f, ++0xe0,0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80, ++0x1c,0xe5,0x0d,0xb4,0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05, ++0x90,0x00,0x83,0x80,0x08,0xe5,0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f, ++0x80,0x06,0x90,0x01,0xbe,0xe0,0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f, ++0x30,0xe0,0x03,0xa3,0x80,0x03,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xf1,0x38,0x12,0x44, ++0xc2,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0, ++0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74, ++0x02,0xf0,0x74,0x99,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5d,0xa3,0xf0,0xd0,0x07,0xd0, ++0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0, ++0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xe5,0x6f,0x30,0xe6,0x19,0xe5,0x6f,0x54, ++0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90, ++0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70,0x70,0x02, ++0xe1,0xe1,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54, ++0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef,0x90,0x91, ++0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee, ++0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef, ++0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06, ++0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f,0xff,0xe4, ++0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40, ++0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44, ++0xc2,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24,0x8d,0x25,0x22, ++0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1,0x2c,0xc3,0x90, ++0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a,0x90,0x01,0xc6, ++0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0,0x01,0x12,0x42, ++0x81,0x7f,0x01,0x7e,0x00,0x12,0x32,0x15,0x80,0xcd,0x7f,0x01,0x22,0x90,0x01,0xcc, ++0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70,0x02,0x21,0x6f, ++0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33, ++0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x21,0x68,0x90,0x91,0x9c,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12,0xf0,0x75,0x63, ++0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a,0x91,0x79,0x13, ++0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90,0x91, ++0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x15,0xe0,0x90, ++0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43,0x15, ++0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12, ++0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01, ++0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04, ++0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33,0xe0,0x75,0xf0, ++0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91, ++0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0, ++0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x51,0xf8,0x90,0x91,0x11, ++0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0xa8, ++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x91,0x9c,0xe0, ++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x37,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22, ++0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0, ++0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5, ++0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83, ++0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0, ++0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f,0x0c,0x75,0x6e, ++0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0,0x90,0x91,0x39, ++0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x29,0xf0,0x90, ++0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32,0xf0,0xa3,0x74, ++0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74, ++0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0,0x90,0x91,0x25, ++0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0,0x90,0x91,0x26, ++0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0,0x22,0xe4,0x90, ++0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x90,0x06,0x04,0xe0,0x54,0xbf, ++0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53,0x6e, ++0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x51,0x7e,0x90,0x91,0x9d,0xe0, ++0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90,0x00, ++0x11,0xe0,0x44,0x09,0xf0,0x12,0x4a,0xe6,0x90,0x90,0xd8,0x12,0x43,0x09,0x90,0x80, ++0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0xdc,0x12,0x43, ++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90, ++0xe0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b, ++0x08,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e, ++0x0e,0x12,0x2b,0x08,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd, ++0xff,0x12,0x30,0x2c,0x90,0x91,0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25, ++0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x22,0x8f,0x77,0xe4, ++0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f, ++0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91,0x97,0xe0,0x94,0x88,0x90,0x91,0x96, ++0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90,0x91,0x96, ++0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x32,0x15,0xd3,0x90, ++0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0,0x94,0x00,0x40,0xb9,0x90,0x01,0xc7, ++0xe0,0x30,0xe0,0xb2,0x22,0x22,0x53,0x6e,0xf0,0x43,0x6e,0x01,0x71,0x55,0x71,0x67, ++0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x22,0x8f,0x78,0x12,0x47,0xe6,0xef,0x64,0x01, ++0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5,0x78,0x60,0x10,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0, ++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5,0x70,0x60, ++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43, ++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff, ++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01, ++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f, ++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07, ++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0, ++0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01, ++0xc3,0xc0,0xd0,0x90,0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0, ++0x90,0x91,0x84,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90, ++0x91,0x87,0xe0,0x94,0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6, ++0xe0,0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12, ++0x42,0x81,0x7f,0x0a,0x7e,0x00,0x12,0x32,0x15,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92, ++0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90, ++0x91,0x1f,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90, ++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90, ++0x91,0x25,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0, ++0xef,0xc3,0x13,0x54,0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff, ++0x13,0x13,0x54,0x01,0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70, ++0x26,0x12,0x25,0x14,0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80, ++0x96,0x12,0x25,0x08,0x7f,0x60,0x7e,0x08,0x12,0x2b,0x08,0x90,0x91,0x1f,0x12,0x25, ++0x14,0x00,0x00,0x03,0x10,0x80,0x24,0x12,0x25,0x14,0x00,0x00,0x01,0x10,0x90,0x91, ++0x1f,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x60,0x7e,0x08,0x12,0x2b, ++0x08,0x90,0x91,0x1f,0x12,0x25,0x14,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43, ++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,0x08,0x12,0x2b,0x08,0x90,0x91, ++0x26,0xe0,0x70,0x3d,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x22, ++0x65,0x90,0x91,0x1f,0x12,0x25,0x08,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02, ++0xfc,0x90,0x91,0x1f,0x12,0x25,0x08,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x90,0x02,0x86,0xe0,0x54,0xfb, ++0xf0,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x49,0x7f,0x90,0x01,0xe5,0xe5,0x70,0xf0, ++0x90,0x91,0x3b,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02, ++0x12,0x42,0x20,0xff,0x30,0xe0,0x25,0x12,0x24,0x62,0x90,0x91,0x2f,0xf0,0x90,0x00, ++0x01,0x12,0x42,0x20,0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d, ++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74, ++0x0a,0xf0,0x90,0x91,0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91, ++0x35,0x74,0x05,0xf0,0x22,0x12,0x24,0x62,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90, ++0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32,0xe4,0xf0,0xa3, ++0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32,0xe4,0xf0,0xa3, ++0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x02, ++0x09,0xe0,0xfd,0x12,0x24,0x62,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91,0x41,0xf0,0x90, ++0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90,0x00,0x02,0x12, ++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff, ++0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed, ++0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x47, ++0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0,0xf5,0x1a,0xe4, ++0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xe0,0xff,0x74, ++0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5,0x90,0x91,0x1d, ++0xe0,0x12,0x43,0x4a,0x66,0xb3,0x00,0x67,0xdc,0x01,0x66,0xba,0x02,0x66,0xba,0x03, ++0x66,0xba,0x04,0x67,0xdc,0x05,0x67,0xac,0x80,0x67,0xc2,0x81,0x67,0xdc,0x82,0x00, ++0x00,0x67,0xd8,0xaf,0x1e,0x12,0x73,0xea,0xe1,0xdc,0x90,0x91,0x1d,0xe0,0xff,0xb4, ++0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90,0x91,0x1c,0xb4,0x03, ++0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19,0x94,0x08,0x50,0x49, ++0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f,0x40,0x02,0xe1,0xdc, ++0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a,0xff,0xc3,0x74,0x03,0x95, ++0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4b,0xee,0x80,0x1a,0xc3,0x74,0x03,0x95,0x16, ++0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a,0xfd,0xec,0x35,0x19,0x8d, ++0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xba,0xc3,0xe5,0x19,0x94,0x10,0x40,0x02, ++0xe1,0xdc,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x02,0xe1,0xdc,0xaf,0x1c,0xfc,0xfd, ++0xfe,0x78,0x10,0x12,0x24,0xf5,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b, ++0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x24,0xf5,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0, ++0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc, ++0xfd,0xfe,0x78,0x08,0x12,0x24,0xf5,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12, ++0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe, ++0x12,0x42,0xfc,0xa3,0x12,0x25,0x08,0x90,0x91,0x1e,0x12,0x43,0x09,0x90,0x80,0x96, ++0x12,0x25,0x08,0xaf,0x1a,0xae,0x19,0x12,0x2b,0x08,0x80,0x30,0xe5,0x1d,0x7f,0x00, ++0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x32,0x15, ++0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17, ++0xaf,0x18,0xfe,0x12,0x31,0x82,0x80,0x04,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0, ++0x92,0xaf,0x22,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10,0x8a,0x11,0x89,0x12,0xe4,0x90, ++0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4a,0xe6,0xe5,0x0e,0x54,0x03,0xff, ++0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x54, ++0x7f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x91,0x11,0xe0, ++0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x91,0x11,0xe0,0xc3,0x94, ++0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa,0x11,0xa9,0x12,0x12,0x42,0x4d, ++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98,0xf0,0xa3,0xf0,0x90,0x05,0xf8, ++0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f, ++0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90,0x91,0x98,0xe0,0x94,0x03,0x40, ++0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x32,0x15,0x90,0x91,0x98,0xe4,0x75, ++0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0xef,0x70,0x02,0x41,0x3d,0x90,0x90,0xe8,0xe0, ++0x60,0x02,0xc1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x84,0x12,0x43,0x09, ++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x88, ++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08, ++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e, ++0x12,0x2b,0x08,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f, ++0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x98,0x12,0x43,0x09,0x90, ++0x80,0x96,0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x9c,0x12, ++0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90, ++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e,0x12, ++0x2b,0x08,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x88, ++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25, ++0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80, ++0x96,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xb0,0x12,0x43, ++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90, ++0xb4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd8,0x7e,0x0e,0x12,0x2b, ++0x08,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xdc,0x7e, ++0x0e,0x12,0x2b,0x08,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x96, ++0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xc4,0x12,0x43,0x09, ++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90,0xc8, ++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08, ++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09, ++0x12,0x2b,0x08,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f, ++0x04,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8, ++0xe0,0x64,0x01,0x60,0x02,0xc1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x90, ++0xd4,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0x80,0x12,0x25, ++0x08,0x7f,0x5c,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0x84,0x12,0x25,0x08,0x7f,0x6c, ++0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x88,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e,0x12, ++0x22,0x65,0x90,0x90,0x8c,0x12,0x25,0x08,0x7f,0x74,0x7e,0x0e,0x12,0x22,0x65,0x90, ++0x90,0x90,0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x94,0x12, ++0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x98,0x12,0x25,0x08,0x7f, ++0x80,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x9c,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e, ++0x12,0x22,0x65,0x90,0x90,0xa0,0x12,0x25,0x08,0x7f,0x88,0x7e,0x0e,0x12,0x22,0x65, ++0x90,0x90,0xa4,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xa8, ++0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xac,0x12,0x25,0x08, ++0x7f,0xd4,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xb0,0x12,0x25,0x08,0x7f,0xd8,0x7e, ++0x0e,0x12,0x22,0x65,0x90,0x90,0xb4,0x12,0x25,0x08,0x7f,0xdc,0x7e,0x0e,0x12,0x22, ++0x65,0x90,0x90,0xb8,0x12,0x25,0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90, ++0xbc,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xc0,0x12,0x25, ++0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x90,0xc4,0x12,0x25,0x08,0x7f,0x04, ++0x7e,0x0d,0x12,0x22,0x65,0x90,0x90,0xc8,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12, ++0x22,0x65,0x90,0x90,0xcc,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90, ++0x90,0xd0,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x91,0x88,0x12, ++0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88, ++0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f, ++0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x01,0x00,0x00, ++0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0xdb,0x25, ++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb, ++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20, ++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14, ++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25, ++0x14,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12, ++0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96, ++0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80, ++0x96,0x12,0x25,0x14,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2b,0x08,0x90, ++0x80,0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2b,0x08, ++0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2b, ++0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12, ++0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e, ++0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e, ++0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f,0xdc, ++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f, ++0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x24,0xdb,0x25,0xa4, ++0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x91, ++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88, ++0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91, ++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08, ++0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x22,0x65,0x90,0x91, ++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90, ++0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec, ++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,0x65, ++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90, ++0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec, ++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12, ++0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,0x65, ++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd, ++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09, ++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91, ++0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b, ++0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91, ++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x25,0x08,0x90, ++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x25,0x08, ++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08, ++0x12,0x2b,0x08,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4b,0xee, ++0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0,0x90, ++0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0,0x90, ++0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90, ++0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0,0x90, ++0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0,0x44, ++0xc0,0xfd,0x7f,0x51,0x02,0x4b,0xee,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0,0x90, ++0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0,0x90, ++0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04,0xe0, ++0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0, ++0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0,0x04, ++0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60, ++0x02,0xe1,0x6e,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x90, ++0x91,0x07,0xe0,0x70,0x32,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43, ++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06, ++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x90,0xf4,0xe0,0xff,0xd1,0x67,0x90,0x91,0x07, ++0x74,0x01,0x12,0x4b,0xe4,0x80,0x40,0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90, ++0x90,0xf8,0xe0,0xff,0xd1,0x67,0xe4,0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44, ++0x01,0xfd,0x7f,0x45,0x12,0x4b,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef, ++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08, ++0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91, ++0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91, ++0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90, ++0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x06,0xe0,0x04,0xf0,0x02,0x70,0x29,0x90,0x90, ++0xee,0xe0,0x64,0x14,0x60,0x03,0x02,0x70,0x29,0x90,0x90,0xfd,0xe0,0x70,0x25,0x90, ++0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91,0x01,0xe0,0x70, ++0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07,0x90,0x04,0xfd, ++0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90,0x90,0xfe,0xe0, ++0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90, ++0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04,0x49,0xf0,0x90, ++0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9,0xe0,0x90,0x04, ++0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb,0xe0,0x90,0x04, ++0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90,0xee,0xf0,0x90, ++0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90,0xfd,0xf0,0xa3, ++0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x8c, ++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x8e, ++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0,0xff,0x90,0x91, ++0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e,0xd3,0x94,0x01, ++0x40,0x11,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90,0xf8,0xe0,0xff, ++0x12,0x6e,0x67,0x22,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08,0x90,0x90,0xf5,0xe0, ++0x60,0x02,0x21,0x4b,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0, ++0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80, ++0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x90, ++0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0, ++0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9,0xf0,0x90,0x00,0x44, ++0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd,0xe0,0xc3,0x94,0xff, ++0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3,0x94,0xff,0x50,0x06, ++0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0, ++0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90,0x00,0x44,0xe0,0x30, ++0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24, ++0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90, ++0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x01,0xf0, ++0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x90,0x06,0x90,0xe0, ++0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f,0xe0,0xff,0x90, ++0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4a,0xf6,0x90,0x91,0x60,0xe0, ++0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x32,0x15,0x90,0x91,0x5e,0xe0,0xc4,0x13, ++0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0, ++0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0x90, ++0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90,0x01,0x1f,0xe0, ++0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,0x11,0xf0, ++0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91,0x56,0xe0,0x20, ++0xe0,0x02,0x61,0xc4,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0,0xff,0x90,0x91, ++0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xc4,0x90,0x91,0x11,0xe0,0xfc,0xa3,0xe0,0xfd, ++0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02,0x2d,0xf5,0x82, ++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54,0xf8,0xff,0xed, ++0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0xfb, ++0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x7a, ++0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91,0x13,0xf0,0xa3, ++0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4,0x35,0xf0,0xfe, ++0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0,0xff,0xad,0x03, ++0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0,0x24,0x00,0xf5, ++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19,0x74,0x02,0xf0, ++0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea,0x8f,0xf0,0x12, ++0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11,0xe0,0xfc,0xa3, ++0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24,0x01,0xff,0x90, ++0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90,0x91,0x11,0xf0, ++0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24,0x20,0x70,0x27, ++0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0,0x02,0x61,0x9c, ++0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0,0x44,0x08,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x61,0x95,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x13,0x54,0x03, ++0x20,0xe0,0x02,0x61,0x9c,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5,0x82,0xe4,0x34, ++0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19,0xe0,0xfe,0xef, ++0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0, ++0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x64, ++0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f,0xff,0x90,0x91, ++0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83, ++0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0,0x44,0x02,0xfd, ++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90,0x91,0x56,0xe0, ++0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x4c,0x71,0xc9,0xbf,0x01, ++0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90,0x91,0x17,0xe0, ++0x04,0xf0,0x21,0xd9,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0,0xc4,0x13,0x13, ++0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e,0xe0,0xc4,0x54, ++0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4,0x90,0x91,0x22, ++0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04, ++0xfd,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x1f,0x14,0xff, ++0x7d,0xff,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91,0x22,0xe0,0xc3, ++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe0,0x04, ++0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x2d,0x4d,0xc3,0xee,0x94,0x01,0x40,0x0a, ++0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee,0x94,0x01,0x40, ++0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5,0x05,0x07,0x90, ++0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4,0x2f,0xff,0x22, ++0x14,0x25,}; ++ ++ ++ ++u8 Rtl8192CUFwUMCBCutWWImgArray[UMCBCutWWImgArrayLength] = { ++0xc2,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x45,0x66,0x34,0x01,0x00, ++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x4a,0x22,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x02,0x57,0xe1,0x00,0x00,0x00,0x00,0x00,0x02,0x58,0xc4,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, ++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50, ++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22, ++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06, ++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8, ++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22, ++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2, ++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70, ++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5, ++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8, ++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08, ++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8, ++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5, ++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb, ++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee, ++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0, ++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83, ++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0, ++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0, ++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4, ++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5, ++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf, ++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3, ++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0, ++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb, ++0x02,0x50,0x34,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2, ++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33, ++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf, ++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e, ++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93, ++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3, ++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca, ++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe, ++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80, ++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00, ++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91, ++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12, ++0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74, ++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4, ++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06, ++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c, ++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05, ++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42, ++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82, ++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80, ++0xed,0x7f,0x00,0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x22, ++0x22,0x22,0x22,0x02,0x5e,0x55,0x02,0x5e,0x5c,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26, ++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5, ++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce, ++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54, ++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c, ++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce, ++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04, ++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01, ++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3, ++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e, ++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25, ++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x2a,0x8b,0x00,0x00,0x00, ++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71, ++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91, ++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27, ++0xde,0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc, ++0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90, ++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60, ++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0, ++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74, ++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf, ++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab, ++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60, ++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x29,0xd9,0xff,0x90,0x91, ++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61, ++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91, ++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f, ++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x88,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b, ++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d, ++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21, ++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1, ++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0, ++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef, ++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30, ++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x61,0x86,0xe5,0x6e,0x30,0xe3, ++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x60,0xb1,0xef,0x60,0x53,0x80,0x52, ++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02, ++0x61,0x6b,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3, ++0x08,0x12,0x60,0xb1,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04, ++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x60,0xfa,0xef,0x60,0x13,0x12,0x48, ++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x62, ++0x6c,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01, ++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15, ++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x60,0x16,0x90, ++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4, ++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22, ++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0, ++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff, ++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5, ++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91, ++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0, ++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10, ++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3, ++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09, ++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5, ++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3, ++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80, ++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x69,0x87,0x22,0x90,0x01, ++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x7c,0xef,0x70,0x06, ++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0xe5,0x70,0x60, ++0x04,0x7f,0x01,0x11,0xb3,0x12,0x68,0xbd,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef, ++0x64,0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12, ++0x36,0x75,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x36,0xe6,0x7d,0x10, ++0x7f,0x03,0x12,0x36,0x92,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0, ++0x12,0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06, ++0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0, ++0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0x7d,0x10,0x7f, ++0x03,0x12,0x36,0x92,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44, ++0x07,0xf0,0x12,0x44,0xf4,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22, ++0x8b,0x0e,0x8a,0x0f,0x89,0x10,0xf1,0xf2,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x29, ++0xd9,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40, ++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20, ++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02, ++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9, ++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xff, ++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80, ++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91, ++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x12,0x47,0xe6,0xbf, ++0x01,0x0f,0x90,0x02,0x09,0xe0,0xff,0x7d,0x01,0x11,0x22,0x90,0x04,0x1f,0x74,0x20, ++0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0, ++0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90, ++0x01,0xc4,0x74,0x22,0xf0,0x74,0x4a,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5, ++0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5, ++0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34,0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14, ++0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4, ++0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x91,0x89,0xef,0x64,0x01,0x70,0x30,0x90,0x91, ++0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e, ++0x01,0x12,0x44,0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0, ++0x90,0x91,0x37,0xf0,0x80,0x08,0x91,0x89,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c, ++0x30,0xe1,0x21,0x90,0x01,0x34,0x74,0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85, ++0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9, ++0x5f,0x12,0x64,0x66,0xe5,0x2c,0x30,0xe3,0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90, ++0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57,0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01, ++0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x24,0x90,0x01,0xcf,0xe0, ++0x30,0xe5,0x1d,0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00, ++0x75,0xe8,0x00,0xd1,0x65,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x91,0xa0,0x80,0xfe, ++0xe5,0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x15, ++0x90,0x91,0x50,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x63,0x2e,0x12,0x70,0xee, ++0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30,0xe1,0x3b,0x90,0x01,0x36,0x74,0x02,0xf0, ++0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54,0x03,0x64,0x01,0x70,0x28,0x90,0x01,0x37, ++0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,0x91,0x40,0xe4,0xf0,0x80,0x17,0x90,0x91, ++0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,0x40,0x0b,0xe4,0xf0,0x90,0x04,0x19,0xe0, ++0x30,0xe0,0x02,0x51,0x0c,0xe5,0x2e,0x30,0xe2,0x1a,0x90,0x01,0x36,0x74,0x04,0xf0, ++0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0,0x12,0x62,0xb8,0x90,0x91, ++0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5, ++0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01, ++0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4,0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05, ++0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01, ++0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0, ++0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44, ++0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01, ++0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8, ++0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0, ++0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60,0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07, ++0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30,0xe1,0x09,0x90,0x01,0x37,0x74,0x02,0xf0, ++0x12,0x64,0x31,0x74,0x22,0x04,0x90,0x01,0xc4,0xf0,0x74,0x4a,0xa3,0xf0,0xd0,0x07, ++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0, ++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64, ++0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe,0xd0,0xd0,0x92,0xaf,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b,0xed,0xf0,0x90,0x91,0x9a,0xef, ++0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3, ++0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x91,0xa0,0x90,0x91,0x9a, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00, ++0x46,0xe0,0x4f,0xf0,0x91,0xa0,0x90,0x91,0x9b,0xe0,0x60,0x16,0x90,0x91,0x9a,0xe0, ++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x45, ++0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90,0x91,0x9a,0xe0,0x24,0xf8,0xf0, ++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0, ++0x91,0x98,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33, ++0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x91,0xa0,0x90,0x91,0x9b,0xe0,0x60, ++0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f,0x80,0x1a,0x90,0x91,0x9a,0xe0, ++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4, ++0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x91,0xa0,0xd0,0xd0,0x92,0xaf,0x22,0xf0,0x90, ++0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f, ++0x82,0x75,0x83,0x00,0xed,0xf0,0x91,0xa0,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60, ++0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0xc1,0x64,0x90,0x90,0xf3,0x74,0x02,0xf0, ++0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0xb1,0xa8,0x90,0x00,0x47,0xe0,0x44, ++0x08,0xfd,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80, ++0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd, ++0x7f,0x45,0xb1,0xa8,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0xb1,0xa8,0x90, ++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x90,0xf3,0x74,0x01,0xf0, ++0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08, ++0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0xb1,0xa8,0x90,0x00, ++0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd, ++0x7f,0x46,0xb1,0xa8,0x22,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0, ++0x90,0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0xb1,0xa8,0xe4, ++0xfd,0x7f,0x51,0xb1,0xa8,0xe4,0xfd,0x7f,0x52,0xb1,0xa8,0xe4,0xfd,0x7f,0x53,0xa1, ++0xa8,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf6, ++0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12, ++0x27,0xde,0x90,0x90,0xef,0x12,0x2a,0x7f,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00, ++0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04, ++0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43,0x09,0xec,0x54,0x03,0xfc, ++0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d, ++0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc, ++0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x2a,0x7f,0x90,0x90,0xef,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xf6, ++0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x48,0xe0,0x44,0x0c, ++0xfd,0x7f,0x48,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47, ++0xe0,0x54,0xf3,0xfd,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f, ++0x48,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0xb1,0xa8,0xe4,0x90, ++0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01, ++0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0xb1,0xa8,0x7d,0xff,0x7f, ++0x55,0xb1,0xa8,0x7d,0xff,0x7f,0x56,0xb1,0xa8,0x7d,0xff,0x7f,0x57,0xa1,0xa8,0xe5, ++0x72,0x64,0x01,0x70,0x3e,0x12,0x54,0x41,0xbf,0x01,0x05,0x7f,0x01,0x12,0x56,0xe7, ++0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0xb1,0xa8,0x90,0x00,0x44,0xe0,0x54, ++0xfb,0xfd,0x7f,0x44,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0xb1, ++0xa8,0x7f,0x02,0x12,0x6f,0x09,0x8f,0x76,0x90,0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01, ++0x02,0xf1,0xd4,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0,0x54,0x0f,0xf0, ++0x44,0xf0,0xfd,0x7f,0x49,0xb1,0xa8,0x90,0x91,0x9f,0xe0,0x44,0xb0,0xfd,0x7f,0x49, ++0xa1,0xa8,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x75,0x28, ++0x33,0xe4,0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3, ++0xe5,0x29,0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0x75,0x30,0x1f,0x75, ++0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3,0xe5,0x31,0xf0,0xa3, ++0xe5,0x32,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3,0xf0,0x75,0x8e,0x02,0xf1,0x02, ++0xd1,0xb4,0x90,0x91,0x4f,0xef,0xf0,0xd1,0xdb,0x90,0x91,0x51,0xef,0xf0,0xf1,0x3d, ++0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57,0xd1,0xd2,0x12,0x60,0x37, ++0x12,0x32,0x3d,0xd1,0xc1,0x12,0x4f,0xfe,0xf1,0x13,0xd1,0xcb,0x11,0x1c,0x12,0x44, ++0xff,0x31,0x23,0x11,0xdf,0x12,0x6f,0xaa,0x90,0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4f, ++0x64,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0x12,0x4c,0xa0,0x75,0xe8,0x03, ++0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0,0x64,0x01,0xf0,0x24,0x34,0x90,0x01, ++0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30,0xe2,0x10,0x12,0x5e,0x63,0xbf,0x01, ++0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12,0x71,0x8a,0xe5,0x57,0x30,0xe4,0x0a, ++0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x5e,0xa0,0x90,0x90,0xf7,0xe0,0x70,0x03, ++0x12,0x70,0x08,0x11,0xf7,0x90,0x91,0x3f,0xe0,0x90,0x01,0xba,0xf0,0x80,0xb6,0x90, ++0x91,0x53,0xe0,0x54,0xfe,0xf0,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54, ++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b, ++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x68,0x1a,0xbf,0x01,0x09, ++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xc1,0xf4,0xe4,0x90,0x06, ++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01, ++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91, ++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0, ++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8, ++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe, ++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef, ++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0, ++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22, ++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x29,0xd9,0x54,0x01,0xff,0x90,0x91,0x56, ++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90, ++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a, ++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57, ++0x04,0x7d,0x08,0xe4,0xff,0x12,0x36,0xe6,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x36, ++0x75,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x51,0x01,0x31,0x23,0xd0,0xd0,0x92,0xaf, ++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x6a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12, ++0x43,0x4a,0x52,0x40,0x01,0x52,0x49,0x02,0x52,0x6a,0x03,0x52,0x73,0x09,0x52,0x7b, ++0x0c,0x52,0x84,0x0d,0x52,0x8c,0x0e,0x52,0x9d,0x1a,0x52,0xa5,0x2c,0x52,0x51,0x2d, ++0x52,0x5a,0x2e,0x52,0xad,0x30,0x52,0x62,0x3b,0x52,0x95,0x3c,0x00,0x00,0x52,0xb5, ++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0xde,0x90,0x91,0x19,0x12,0x43,0x21,0xc1, ++0xc5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0xf9,0x90,0x91,0x19,0x12,0x43,0x21, ++0xe1,0xa8,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x28,0x90,0x91,0x19,0x12,0x43,0x21, ++0x02,0x66,0x41,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12,0x43, ++0x21,0x02,0x5d,0x16,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x75,0x90,0x91,0x19,0x12, ++0x43,0x21,0x02,0x4e,0x91,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0xa0,0x90,0x91,0x19, ++0x12,0x43,0x21,0xa1,0x7f,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x5e,0x90,0x91,0x19, ++0x12,0x43,0x21,0xe1,0x55,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10,0xaf, ++0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43,0x21, ++0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,0x90, ++0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12,0x29, ++0xd9,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01, ++0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91,0x1c, ++0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x35,0x80,0x10, ++0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0x65,0x72,0x60,0x03,0x12,0x44,0xe8, ++0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72,0x01, ++0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x71,0x77,0xe4,0xfd,0x7f,0x02,0x71,0x77, ++0x91,0x41,0xe4,0xff,0xd1,0xe7,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5,0x76,0xf0,0x90, ++0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,0x7d,0x01, ++0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91, ++0x22,0xed,0xf0,0x90,0x91,0x21,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4f,0xa3,0xe0,0x70, ++0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff, ++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0, ++0x4f,0xf0,0x12,0x4c,0xa0,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x5a,0x90,0x91,0x21,0xe0, ++0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0, ++0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02, ++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x12,0x4c, ++0xa0,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8, ++0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x12,0x4c,0xa0,0xd0,0xd0,0x92,0xaf, ++0x22,0x7f,0x0b,0x12,0x6f,0x09,0xef,0x65,0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05, ++0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01,0x7f,0x01,0x22,0x7f,0x00,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5, ++0x15,0x90,0x02,0x09,0xe0,0xff,0x12,0x29,0xd9,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0, ++0x08,0x75,0x0e,0x00,0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13, ++0xc3,0x13,0x90,0xfd,0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10, ++0x2d,0xff,0x24,0x01,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0, ++0x74,0x02,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24, ++0x03,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91, ++0x48,0xf0,0xa3,0xef,0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82, ++0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5, ++0x83,0xee,0xf0,0x0f,0xbf,0x08,0xe0,0x12,0x66,0x89,0xef,0x70,0x3f,0x90,0x01,0xc3, ++0xe0,0x60,0x25,0xc3,0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01, ++0xc6,0xe0,0x44,0x10,0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f, ++0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30, ++0xe2,0x05,0x74,0xfe,0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78, ++0x23,0xe4,0xf5,0x10,0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e, ++0xf5,0x0f,0x80,0x06,0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd, ++0x10,0xf0,0x80,0x06,0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02, ++0x15,0x11,0xe5,0x12,0x45,0x11,0x60,0x02,0x81,0x9c,0xd0,0xd0,0x92,0xaf,0x22,0x90, ++0x91,0x1c,0x12,0x43,0x41,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0, ++0x54,0xfe,0x4e,0xf0,0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x29,0xd9, ++0xff,0x54,0x02,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff, ++0xe0,0x54,0xf7,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0, ++0x54,0xef,0x4e,0xf0,0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x29,0xd9, ++0xff,0x54,0x40,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff, ++0xe0,0x54,0x7f,0x4f,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90, ++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff, ++0x54,0x01,0xfe,0x90,0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0, ++0x54,0xfd,0x4f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61, ++0xe0,0x54,0xfb,0x4f,0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90, ++0x91,0x5e,0xe0,0xff,0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0, ++0x54,0x01,0x90,0x01,0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x29,0xd9,0x20,0xe0,0x02, ++0x41,0x01,0xe4,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x90,0x91,0x1c,0x12,0x43,0x21,0x12, ++0x29,0xd9,0xff,0xc3,0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef, ++0x13,0x13,0x54,0x3f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x29, ++0xd9,0x13,0x13,0x13,0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0, ++0x90,0x91,0x61,0xe0,0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30, ++0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01, ++0x12,0x4c,0xb0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01,0x60,0x02,0x7f,0x00, ++0x22,0xe4,0xf5,0x75,0x22,0x12,0x29,0xd9,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0, ++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f, ++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x01,0xca,0xe5,0x75,0xf0,0xef,0x60,0x03, ++0x12,0x4f,0xd4,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3, ++0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80, ++0x02,0x4d,0xa8,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0, ++0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x29,0xd9,0x60,0x02,0x80,0x01,0xe4, ++0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x91,0x51, ++0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22, ++0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x53,0xe0, ++0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01,0x12,0x42,0x20, ++0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf7,0xf0,0xe0, ++0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2,0xaf,0x90,0x00, ++0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4d,0xa8,0x7d,0x40,0x7f,0x01,0x12,0x36, ++0xaf,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13, ++0x54,0x7f,0x90,0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32, ++0xe4,0xf0,0xa3,0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32, ++0xe4,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0, ++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00, ++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01, ++0xc4,0x74,0xe1,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff, ++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0, ++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d, ++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00, ++0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x90, ++0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4d,0xbd,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00, ++0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02, ++0x12,0x4d,0xbd,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e, ++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00, ++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90, ++0x01,0xc4,0x74,0xe1,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0, ++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0, ++0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0, ++0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0, ++0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0xc4,0xf0,0x74,0x58,0xa3,0xf0,0x53,0x91, ++0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55,0x31,0xf5,0x35,0xa3, ++0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5,0x34,0x30,0xe0,0x06, ++0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08,0x90,0x01,0x3c,0x74,0x02, ++0xf0,0x71,0x89,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c,0x74,0x04,0xf0,0x90,0x06, ++0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91, ++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b,0x74, ++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90,0x91,0x37,0xe4,0xf0,0x12, ++0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74,0x08,0xf0,0x90,0x06,0x92, ++0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67, ++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5f,0x74,0x05, ++0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91,0x36,0xe4,0xf0,0x12,0x44, ++0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4f,0x8f,0xe5, ++0x34,0x30,0xe5,0x08,0x90,0x01,0x3c,0x74,0x20,0xf0,0x51,0x62,0xe5,0x35,0x30,0xe0, ++0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0,0x90,0x00, ++0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x0d,0xb4,0x02,0x05, ++0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05,0x90,0x00,0x83,0x80,0x08,0xe5, ++0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f,0x80,0x06,0x90,0x01,0xbe,0xe0, ++0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f,0x30,0xe0,0x03,0xa3,0x80,0x03, ++0x90,0x01,0xbd,0xe0,0x04,0xf0,0x71,0x6a,0x12,0x44,0xc2,0xe5,0x35,0x30,0xe2,0x06, ++0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0,0x06,0x90,0x01,0x3e,0x74,0x01, ++0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74,0x02,0xf0,0x74,0xc4,0x04,0x90, ++0x01,0xc4,0xf0,0x74,0x58,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0, ++0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0, ++0xe0,0x32,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60,0x02,0x61,0x17,0x90,0x00,0x46,0xe0, ++0x44,0x01,0xfd,0x7f,0x46,0x12,0x4d,0xa8,0x90,0x91,0x07,0xe0,0x70,0x32,0x90,0x90, ++0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90, ++0x90,0xf4,0xe0,0xff,0x71,0x18,0x90,0x91,0x07,0x74,0x01,0x12,0x4d,0x9e,0x80,0x40, ++0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90,0x90,0xf8,0xe0,0xff,0x71,0x18,0xe4, ++0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44,0x01,0xfd,0x7f,0x45,0x12,0x4d,0xa8, ++0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0, ++0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,0x90, ++0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,0x90, ++0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0, ++0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0, ++0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04, ++0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3, ++0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0, ++0x04,0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0xe5,0x6f,0x30,0xe6,0x19,0xe5, ++0x6f,0x54,0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64, ++0x80,0x90,0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70, ++0x70,0x02,0x81,0x13,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5, ++0x71,0x54,0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef, ++0x90,0x91,0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01, ++0xfd,0xee,0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80, ++0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4, ++0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f, ++0xff,0xe4,0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80, ++0x98,0x40,0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22, ++0x12,0x44,0xc2,0x22,0x90,0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x05,0xe0,0x04,0xf0, ++0x81,0xcc,0x90,0x90,0xee,0xe0,0x64,0x14,0x60,0x02,0x81,0xcc,0x90,0x90,0xfd,0xe0, ++0x70,0x25,0x90,0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91, ++0x01,0xe0,0x70,0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07, ++0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90, ++0x90,0xfe,0xe0,0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3, ++0xe4,0xf0,0x90,0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04, ++0x49,0xf0,0x90,0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9, ++0xe0,0x90,0x04,0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb, ++0xe0,0x90,0x04,0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90, ++0xee,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90, ++0xfd,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0, ++0x90,0x91,0x8c,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0, ++0x90,0x91,0x8e,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0, ++0xff,0x90,0x91,0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e, ++0xd3,0x94,0x01,0x40,0x10,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90, ++0xf8,0xe0,0xff,0x71,0x18,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf5,0xf0, ++0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf4,0xf0,0x12,0x29, ++0xd9,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x03, ++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05, ++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c, ++0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x71,0x18,0x90,0x91,0x1c,0xe0,0x24,0xff, ++0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xc1,0x1f,0x90,0x90,0xf4,0xe0,0x70,0x02, ++0xc1,0x1f,0x90,0x90,0xf8,0xe0,0x70,0x02,0xc1,0x1f,0xa2,0xaf,0xe4,0x33,0x90,0x91, ++0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0,0x90,0x91,0x1c,0xe0,0x24,0xff, ++0x92,0xaf,0x12,0x4d,0x9f,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4d, ++0xa8,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74, ++0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x12,0x4d,0xa8,0x90,0x05, ++0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04, ++0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06, ++0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90, ++0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2d,0x90, ++0x90,0xf5,0xe0,0x70,0x2f,0x90,0x91,0x07,0x12,0x4d,0x9e,0x90,0x00,0x46,0xe0,0x54, ++0xfe,0xfd,0x7f,0x46,0x12,0x4d,0xa8,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90, ++0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x36,0x92,0x90,0x91,0x1c,0xe0, ++0x24,0xff,0x92,0xaf,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24, ++0x8d,0x25,0x22,0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1, ++0x2c,0xc3,0x90,0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a, ++0x90,0x01,0xc6,0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0, ++0x01,0x12,0x42,0x81,0x7f,0x01,0x7e,0x00,0x12,0x37,0x54,0x80,0xcd,0x7f,0x01,0x22, ++0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70, ++0x02,0xe1,0xe2,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80, ++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0xe1,0xdb,0x90, ++0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12, ++0xf0,0x75,0x63,0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a, ++0x91,0x79,0x13,0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54, ++0x01,0x90,0x91,0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43, ++0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89, ++0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90, ++0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0, ++0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0, ++0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33, ++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90, ++0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15, ++0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90, ++0x91,0x16,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x52,0x08, ++0x90,0x91,0x11,0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff, ++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90, ++0x91,0x9c,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0xc1,0xaa,0x90,0x01,0xc6,0xe0,0x44, ++0x02,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0, ++0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4, ++0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34, ++0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc, ++0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f, ++0x0c,0x75,0x6e,0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0, ++0x90,0x91,0x39,0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91, ++0x29,0xf0,0x90,0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32, ++0xf0,0xa3,0x74,0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90, ++0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0, ++0x90,0x91,0x25,0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0, ++0x90,0x91,0x26,0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0, ++0x22,0x12,0x4c,0x89,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80, ++0x30,0x90,0x91,0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90, ++0x91,0x36,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54, ++0x0f,0xd3,0x94,0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01, ++0x22,0x90,0x01,0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x12,0x4c,0x89,0xef,0x64,0x01, ++0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08, ++0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40, ++0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01, ++0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71,0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10, ++0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80, ++0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f, ++0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x54, ++0xbf,0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53, ++0x6e,0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x31,0x9f,0x90,0x91,0x9d, ++0xe0,0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90, ++0x90,0xd8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12, ++0x2f,0xd9,0x90,0x90,0xdc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a, ++0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91,0x51,0xe0,0xb4, ++0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01, ++0x12,0x34,0x81,0x22,0x8f,0x77,0xe4,0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09, ++0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f,0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91, ++0x97,0xe0,0x94,0x88,0x90,0x91,0x96,0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0, ++0x44,0x80,0xf0,0x22,0x90,0x91,0x96,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14, ++0x7e,0x00,0x12,0x37,0x54,0xd3,0x90,0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0, ++0x94,0x00,0x40,0xb9,0x90,0x01,0xc7,0xe0,0x30,0xe0,0xb2,0x22,0x53,0x6e,0xf0,0x43, ++0x6e,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x8f, ++0x78,0x12,0x47,0xe6,0xef,0x64,0x01,0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5, ++0x78,0x60,0x10,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10, ++0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef, ++0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70, ++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06, ++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91, ++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff, ++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90, ++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd, ++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71, ++0x22,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfb, ++0x90,0x91,0x78,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x70,0x02,0x61,0xc0, ++0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24, ++0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0,0x14,0xf0,0xe0,0x60,0x04, ++0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90,0x91,0x39,0xe0,0x90,0x91, ++0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45,0x43,0x71,0x10,0xe4,0x90, ++0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff,0x90,0x91,0x34,0xe0, ++0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94, ++0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x10, ++0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d,0xf0,0x22,0x74,0x09,0xf0, ++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x60, ++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43, ++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff, ++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01, ++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f, ++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07, ++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0, ++0x22,0x90,0x91,0x80,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd, ++0x50,0x02,0x80,0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d, ++0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27, ++0xe4,0xff,0x12,0x48,0xb3,0x22,0x90,0x91,0x08,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54, ++0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x91,0x71,0x12,0x43,0x41, ++0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90, ++0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x91,0x84,0xe0, ++0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x91,0x87,0xe0,0x94, ++0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44,0x10,0xf0, ++0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x0a, ++0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10, ++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1f,0x12,0x2a, ++0x8b,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42, ++0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x25,0xf0,0x90, ++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0,0xef,0xc3,0x13,0x54, ++0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x13,0x13,0x54,0x01, ++0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70,0x26,0x12,0x2a,0x8b, ++0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x03, ++0x10,0x80,0x24,0x12,0x2a,0x8b,0x00,0x00,0x01,0x10,0x90,0x91,0x1f,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f, ++0x12,0x2a,0x8b,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x26,0xe0,0x70,0x3d, ++0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x1f, ++0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02,0xfc,0x90,0x91,0x1f, ++0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90,0x91,0x1c, ++0x12,0x43,0x21,0x12,0x49,0x80,0x90,0x01,0xe5,0xe5,0x70,0xf0,0x90,0x91,0x3b,0xe0, ++0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0xff, ++0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x91,0x2f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20, ++0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d,0xf0,0x90,0x00,0x03, ++0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74,0x0a,0xf0,0x90,0x91, ++0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0, ++0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91, ++0x41,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90, ++0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12, ++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff, ++0xae,0x05,0xed,0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0x47,0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0, ++0xf5,0x1a,0xe4,0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83, ++0xe0,0xff,0x74,0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5, ++0x90,0x91,0x1d,0xe0,0x12,0x43,0x4a,0x66,0xe6,0x00,0x68,0x13,0x01,0x66,0xee,0x02, ++0x66,0xee,0x03,0x66,0xee,0x04,0x68,0x13,0x05,0x67,0xe3,0x80,0x67,0xf9,0x81,0x68, ++0x13,0x82,0x00,0x00,0x68,0x0f,0xaf,0x1e,0x12,0x73,0xdd,0x02,0x68,0x13,0x90,0x91, ++0x1d,0xe0,0xff,0xb4,0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90, ++0x91,0x1c,0xb4,0x03,0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19, ++0x94,0x08,0x50,0x4a,0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f, ++0x40,0x03,0x02,0x68,0x13,0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a, ++0xff,0xc3,0x74,0x03,0x95,0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4d,0xa8,0x80,0x1a, ++0xc3,0x74,0x03,0x95,0x16,0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a, ++0xfd,0xec,0x35,0x19,0x8d,0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xb9,0xc3,0xe5, ++0x19,0x94,0x10,0x40,0x03,0x02,0x68,0x13,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x03, ++0x02,0x68,0x13,0xaf,0x1c,0xfc,0xfd,0xfe,0x78,0x10,0x12,0x2a,0x6c,0xc0,0x04,0xc0, ++0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b,0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x2a,0x6c, ++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0, ++0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc,0xfd,0xfe,0x78,0x08,0x12,0x2a,0x6c,0xd0,0x03, ++0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab, ++0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe,0x12,0x42,0xfc,0xa3,0x12,0x2a,0x7f,0x90,0x91, ++0x1e,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0xaf,0x1a,0xae,0x19,0x12,0x2f, ++0xd9,0x80,0x30,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5, ++0x17,0xaf,0x18,0xfe,0x12,0x37,0x54,0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25, ++0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x36,0xcb,0x80,0x04,0x7f, ++0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10, ++0x8a,0x11,0x89,0x12,0xe4,0x90,0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4c, ++0xa0,0xe5,0x0e,0x54,0x03,0xff,0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4c, ++0xa0,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4c,0xa0,0x90,0x00,0x33,0xe0,0x20, ++0xe7,0x0e,0x90,0x91,0x11,0xe0,0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb, ++0x90,0x91,0x11,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa, ++0x11,0xa9,0x12,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98, ++0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70, ++0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90, ++0x91,0x98,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x37, ++0x54,0x90,0x91,0x98,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0x7f,0x78,0x7e, ++0x08,0x12,0x27,0xde,0x90,0x90,0xd8,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27, ++0xde,0x90,0x90,0xdc,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x90, ++0xe0,0x12,0x2a,0x7f,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43, ++0x09,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54, ++0xc7,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9, ++0x90,0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44, ++0x02,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9, ++0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xe4,0x12,0x2a,0x7f,0x90,0x80,0x85, ++0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80, ++0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91, ++0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4, ++0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0xef,0x70,0x02,0x61,0x3d,0x90,0x90,0xe8,0xe0, ++0x60,0x02,0xe1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x84,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x88, ++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x98,0x12,0x43,0x09,0x90, ++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x9c,0x12, ++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a, ++0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80, ++0x85,0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xb0,0x12,0x43, ++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90, ++0xb4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x85, ++0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc4,0x12,0x43,0x09, ++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xc8, ++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9, ++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09, ++0x12,0x2f,0xd9,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x04,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8, ++0xe0,0x64,0x01,0x60,0x02,0xe1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90, ++0xd4,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x80,0x12,0x2a, ++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x84,0x12,0x2a,0x7f,0x7f,0x6c, ++0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x88,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12, ++0x27,0xde,0x90,0x90,0x8c,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90, ++0x90,0x90,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x94,0x12, ++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x98,0x12,0x2a,0x7f,0x7f, ++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x9c,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e, ++0x12,0x27,0xde,0x90,0x90,0xa0,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde, ++0x90,0x90,0xa4,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xa8, ++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xac,0x12,0x2a,0x7f, ++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xb0,0x12,0x2a,0x7f,0x7f,0xd8,0x7e, ++0x0e,0x12,0x27,0xde,0x90,0x90,0xb4,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27, ++0xde,0x90,0x90,0xb8,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90, ++0xbc,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xc0,0x12,0x2a, ++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x90,0xc4,0x12,0x2a,0x7f,0x7f,0x04, ++0x7e,0x0d,0x12,0x27,0xde,0x90,0x90,0xc8,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12, ++0x27,0xde,0x90,0x90,0xcc,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90, ++0x90,0xd0,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12, ++0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88, ++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f, ++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00, ++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25, ++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb, ++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20, ++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b, ++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a, ++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12, ++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85, ++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80, ++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90, ++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9, ++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f, ++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12, ++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e, ++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e, ++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc, ++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f, ++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4, ++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88, ++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f, ++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x91, ++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90, ++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90, ++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12, ++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde, ++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd, ++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09, ++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91, ++0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f, ++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91, ++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90, ++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f, ++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08, ++0x12,0x2f,0xd9,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0, ++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07, ++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12, ++0x4c,0xa0,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05, ++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef, ++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80, ++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80, ++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4c,0x98,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e, ++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00, ++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13, ++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4d, ++0xa8,0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0, ++0x90,0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0, ++0x90,0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0, ++0x90,0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0, ++0x90,0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0, ++0x44,0xc0,0xfd,0x7f,0x51,0x02,0x4d,0xa8,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08, ++0x90,0x90,0xf5,0xe0,0x60,0x02,0x01,0xdf,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50, ++0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0, ++0x04,0xf0,0xe4,0x80,0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04, ++0xf0,0xe4,0x90,0x90,0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50, ++0x10,0xe0,0x04,0xf0,0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9, ++0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd, ++0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3, ++0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94, ++0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90, ++0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0, ++0x04,0xf0,0x80,0x24,0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0, ++0xe4,0x80,0x11,0x90,0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4, ++0x90,0x91,0x01,0xf0,0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22, ++0xe5,0x6e,0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91, ++0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d,0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04, ++0xf0,0xe5,0x70,0x64,0x03,0x60,0x05,0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0, ++0xff,0x74,0x01,0xd3,0x9f,0x50,0x14,0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b, ++0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff, ++0x90,0x91,0x54,0xe0,0xb5,0x07,0x07,0x11,0xe0,0xe4,0x90,0x91,0x55,0xf0,0x22,0x90, ++0x06,0x90,0xe0,0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f, ++0xe0,0xff,0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4c,0xb0,0x90, ++0x91,0x60,0xe0,0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x37,0x54,0x90,0x91,0x5e, ++0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90, ++0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4c,0xb0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0, ++0xd0,0xe4,0x90,0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90, ++0x01,0x1f,0xe0,0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90, ++0x91,0x11,0xf0,0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91, ++0x56,0xe0,0x20,0xe0,0x02,0x61,0xb7,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0, ++0xff,0x90,0x91,0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xb7,0x90,0x91,0x11,0xe0,0xfc, ++0xa3,0xe0,0xfd,0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02, ++0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54, ++0xf8,0xff,0xed,0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4, ++0x34,0xfb,0xf5,0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82, ++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x7a,0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91, ++0x13,0xf0,0xa3,0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4, ++0x35,0xf0,0xfe,0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0, ++0xff,0xad,0x03,0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0, ++0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19, ++0x74,0x02,0xf0,0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea, ++0x8f,0xf0,0x12,0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11, ++0xe0,0xfc,0xa3,0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24, ++0x01,0xff,0x90,0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90, ++0x91,0x11,0xf0,0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24, ++0x20,0x70,0x27,0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0, ++0x02,0x61,0x8f,0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0, ++0x44,0x08,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x61,0x88,0x90,0x91,0x5e,0xe0,0xc4,0x13, ++0x13,0x54,0x03,0x20,0xe0,0x02,0x61,0x8f,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5, ++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19, ++0xe0,0xfe,0xef,0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb, ++0xf5,0x83,0xe0,0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5, ++0x83,0xe0,0x64,0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f, ++0xff,0x90,0x91,0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4, ++0x34,0xfb,0xf5,0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34, ++0xfb,0xf5,0x83,0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0, ++0x44,0x02,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90, ++0x91,0x56,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x3f,0x71, ++0xbc,0xbf,0x01,0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90, ++0x91,0x17,0xe0,0x04,0xf0,0x21,0xcc,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0, ++0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e, ++0xe0,0xc4,0x54,0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4, ++0x90,0x91,0x22,0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50, ++0x0e,0xef,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5, ++0x1f,0x14,0xff,0x7d,0xff,0x12,0x34,0xb7,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91, ++0x22,0xe0,0xc3,0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91, ++0x22,0xe0,0x04,0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x34,0xb7,0xc3,0xee,0x94, ++0x01,0x40,0x0a,0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee, ++0x94,0x01,0x40,0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5, ++0x05,0x07,0x90,0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4, ++0x2f,0xff,0x22,0x00,0x18,0x58,}; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c +new file mode 100644 +index 000000000000..382b9782c2f1 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c +@@ -0,0 +1,2674 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#include "drv_types.h" ++#include "rtl8192c_hal.h" ++ ++//================================================================================ ++// Constant. ++//================================================================================ ++ ++// ++// Default LED behavior. ++// ++#define LED_BLINK_NORMAL_INTERVAL 100 ++#define LED_BLINK_SLOWLY_INTERVAL 200 ++#define LED_BLINK_LONG_INTERVAL 400 ++ ++#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000 ++#define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500 ++#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150 ++#define LED_BLINK_FASTER_INTERVAL_ALPHA 50 ++#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000 ++ ++//================================================================================ ++// LED object. ++//================================================================================ ++ ++ ++//================================================================================ ++// Prototype of protected function. ++//================================================================================ ++ ++ ++static void ++BlinkTimerCallback( ++ unsigned long data ++ ); ++ ++static void ++BlinkWorkItemCallback( ++ struct work_struct *work ++ ); ++ ++// ++// Description: ++// Reset blinking status of LED_871x object. ++// ++static void ++ResetLedStatus(PLED_871x pLed) { ++ pLed->CurrLedState = RTW_LED_OFF; // Current LED state. ++ pLed->bLedOn = _FALSE; // true if LED is ON, false if LED is OFF. ++ ++ pLed->bLedBlinkInProgress = _FALSE; // true if it is blinking, false o.w.. ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ pLed->bLedStartToLinkBlinkInProgress = _FALSE; ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ pLed->BlinkTimes = 0; // Number of times to toggle led state for blinking. ++ pLed->BlinkingLedState = LED_UNKNOWN; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. ++} ++ ++//================================================================================ ++// LED_819xUsb routines. ++//================================================================================ ++ ++// ++// Description: ++// Initialize an LED_871x object. ++// ++static void ++InitLed871x( ++ _adapter *padapter, ++ PLED_871x pLed, ++ LED_PIN_871x LedPin ++ ) ++{ ++ pLed->padapter = padapter; ++ pLed->LedPin = LedPin; ++ ++ ResetLedStatus(pLed); ++ ++ _init_timer(&(pLed->BlinkTimer), padapter->pnetdev, BlinkTimerCallback, pLed); ++ _init_workitem(&(pLed->BlinkWorkItem), BlinkWorkItemCallback, pLed); ++} ++ ++ ++// ++// Description: ++// DeInitialize an LED_871x object. ++// ++static void ++DeInitLed871x( ++ PLED_871x pLed ++ ) ++{ ++ //call _cancel_workitem_sync(&(pLed->BlinkWorkItem)) ++ //before _cancel_timer_ex(&(pLed->BlinkTimer)) to ++ //avoid led timer restarting when driver is removed ++ ++ _cancel_workitem_sync(&(pLed->BlinkWorkItem)); ++ ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ ++ // We should reset bLedBlinkInProgress if we cancel the LedControlTimer, 2005.03.10, by rcnjko. ++ ResetLedStatus(pLed); ++} ++ ++// ++// Description: ++// Turn on LED according to LedPin specified. ++// ++static void ++SwLedOn( ++ _adapter *padapter, ++ PLED_871x pLed ++) ++{ ++ u8 LedCfg; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ ++ if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE)) ++ { ++ return; ++ } ++ ++ if( (BOARD_MINICARD == pHalData->BoardType )|| ++ (BOARD_USB_SOLO == pHalData->BoardType)|| ++ (BOARD_USB_COMBO == pHalData->BoardType)) ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG2); ++ switch(pLed->LedPin) ++ { ++ case LED_PIN_GPIO0: ++ break; ++ ++ case LED_PIN_LED0: ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); // SW control led0 on. ++ break; ++ ++ case LED_PIN_LED1: ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); // SW control led1 on. ++ break; ++ ++ default: ++ break; ++ ++ } ++ } ++ else ++ { ++ switch(pLed->LedPin) ++ { ++ case LED_PIN_GPIO0: ++ break; ++ ++ case LED_PIN_LED0: ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ if(pHalData->AntDivCfg) ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG2); ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xe0)|BIT7|BIT6|BIT5); // SW control led0 on. ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED0 0x%x\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG2))); ++ } ++ else ++#endif ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG0); ++ rtw_write8(padapter,REG_LEDCFG0, LedCfg&0x70); // SW control led0 on. ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED0 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0))); ++ } ++ break; ++ ++ case LED_PIN_LED1: ++ LedCfg = rtw_read8(padapter,(REG_LEDCFG1)); ++ rtw_write8(padapter,(REG_LEDCFG1), LedCfg&0x70); // SW control led1 on. ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED1 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0))); ++ ++ break; ++ ++ default: ++ break; ++ } ++ } ++ pLed->bLedOn = _TRUE; ++ ++} ++ ++ ++// ++// Description: ++// Turn off LED according to LedPin specified. ++// ++static void ++SwLedOff( ++ _adapter *padapter, ++ PLED_871x pLed ++) ++{ ++ u8 LedCfg; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ ++ if((padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE)) ++ { ++ goto exit; ++ } ++ ++ if( (BOARD_MINICARD == pHalData->BoardType )|| ++ (BOARD_USB_SOLO == pHalData->BoardType)|| ++ (BOARD_USB_COMBO == pHalData->BoardType)) ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG2);//0x4E ++ ++ switch(pLed->LedPin) ++ { ++ ++ case LED_PIN_GPIO0: ++ break; ++ ++ case LED_PIN_LED0: ++ if(BOARD_USB_COMBO == pHalData->BoardType) ++ { ++ LedCfg &= 0x90; // Set to software control. ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3)); ++ LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG); ++ LedCfg &= 0xFE; ++ rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg); ++ } ++ else ++ { ++ LedCfg &= 0xf0; // Set to software control. ++ if(pHalData->bLedOpenDrain == _TRUE) // Open-drain arrangement for controlling the LED ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT1|BIT5|BIT6)); ++ else ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6)); ++ } ++ break; ++ ++ case LED_PIN_LED1: ++ LedCfg &= 0x0f; // Set to software control. ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3)); ++ break; ++ ++ default: ++ break; ++ } ++ } ++ else ++ { ++ switch(pLed->LedPin) ++ { ++ case LED_PIN_GPIO0: ++ break; ++ ++ case LED_PIN_LED0: ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ if(pHalData->AntDivCfg) ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG2); ++ LedCfg &= 0xe0; // Set to software control. ++ rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT7|BIT6|BIT5)); ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED0 0x%x\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG2))); ++ } ++ else ++#endif ++ { ++ LedCfg = rtw_read8(padapter, REG_LEDCFG0); ++ LedCfg &= 0x70; // Set to software control. ++ rtw_write8(padapter, REG_LEDCFG0, (LedCfg|BIT3)); ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED0 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0))); ++ } ++ break; ++ ++ case LED_PIN_LED1: ++ LedCfg = rtw_read8(padapter, (REG_LEDCFG1)); ++ LedCfg &= 0x70; // Set to software control. ++ rtw_write8(padapter, (REG_LEDCFG1), (LedCfg|BIT3)); ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED1 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0))); ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++exit: ++ pLed->bLedOn = _FALSE; ++ ++} ++ ++//================================================================================ ++// Interface to manipulate LED objects. ++//================================================================================ ++ ++ ++// ++// Description: ++// Implementation of LED blinking behavior. ++// It toggle off LED and schedule corresponding timer if necessary. ++// ++static void ++SwLedBlink( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,( "Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ // Determine if we shall change LED state again. ++ pLed->BlinkTimes--; ++ switch(pLed->CurrLedState) ++ { ++ ++ case LED_BLINK_NORMAL: ++ if(pLed->BlinkTimes == 0) ++ { ++ bStopBlinking = _TRUE; ++ } ++ break; ++ ++ case LED_BLINK_StartToBlink: ++ if( check_fwstate(pmlmepriv, _FW_LINKED) && check_fwstate(pmlmepriv, WIFI_STATION_STATE) ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ if( check_fwstate(pmlmepriv, _FW_LINKED) && ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) || check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ else if(pLed->BlinkTimes == 0) ++ { ++ bStopBlinking = _TRUE; ++ } ++ break; ++ ++ case LED_BLINK_WPS: ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ break; ++ ++ ++ default: ++ bStopBlinking = _TRUE; ++ break; ++ ++ } ++ ++ if(bStopBlinking) ++ { ++ //if( padapter->pwrctrlpriv.cpwm >= PS_STATE_S2) ++ if(0) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else if( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && (pLed->bLedOn == _FALSE)) ++ { ++ SwLedOn(padapter, pLed); ++ } ++ else if( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && pLed->bLedOn == _TRUE) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ ++ pLed->BlinkTimes = 0; ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ // Assign LED state to toggle. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ ++ // Schedule a timer to toggle LED state. ++ switch( pLed->CurrLedState ) ++ { ++ case LED_BLINK_NORMAL: ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ break; ++ ++ case LED_BLINK_SLOWLY: ++ case LED_BLINK_StartToBlink: ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ break; ++ ++ case LED_BLINK_WPS: ++ { ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL); ++ else ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL); ++ } ++ break; ++ ++ default: ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ break; ++ } ++ } ++} ++ ++ ++static void ++SwLedBlink1( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ PLED_871x pLed1 = &(ledpriv->SwLed1); ++ u8 bStopBlinking = _FALSE; ++ ++ if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO) ++ pLed = &(ledpriv->SwLed1); ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,( "Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ ++ if(pHalData->EEPROMCustomerID == RT_CID_DEFAULT) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ if(!pLed1->bSWLedCtrl) ++ { ++ SwLedOn(padapter, pLed1); ++ pLed1->bSWLedCtrl = _TRUE; ++ } ++ else if(!pLed1->bLedOn) ++ SwLedOn(padapter, pLed1); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (): turn on pLed1\n")); ++ } ++ else ++ { ++ if(!pLed1->bSWLedCtrl) ++ { ++ SwLedOff(padapter, pLed1); ++ pLed1->bSWLedCtrl = _TRUE; ++ } ++ else if(pLed1->bLedOn) ++ SwLedOff(padapter, pLed1); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (): turn off pLed1\n")); ++ } ++ } ++ ++ ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ ResetLedStatus(pLed); ++ return; ++ } ++ ++ ++ switch(pLed->CurrLedState) ++ { ++ case LED_BLINK_SLOWLY: ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ break; ++ ++ case LED_BLINK_NORMAL: ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ break; ++ ++ case LED_SCAN_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->bLedLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_NORMAL; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_TXRX_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ if(bStopBlinking) ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->bLedLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_NORMAL; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->BlinkTimes = 0; ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_BLINK_WPS: ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ break; ++ ++ case LED_BLINK_WPS_STOP: //WPS success ++ if(pLed->BlinkingLedState == RTW_LED_ON) ++ bStopBlinking = _FALSE; ++ else ++ bStopBlinking = _TRUE; ++ ++ if(bStopBlinking) ++ { ++ pLed->bLedLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_NORMAL; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA); ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++} ++ ++static void ++SwLedBlink2( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ switch(pLed->CurrLedState) ++ { ++ case LED_SCAN_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop scan blink CurrLedState %d\n", pLed->CurrLedState)); ++ ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop scan blink CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ case LED_TXRX_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop CurrLedState %d\n", pLed->CurrLedState)); ++ ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++} ++ ++static void ++SwLedBlink3( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ if(pLed->CurrLedState != LED_BLINK_WPS_STOP) ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ switch(pLed->CurrLedState) ++ { ++ case LED_SCAN_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ if( !pLed->bLedOn ) ++ SwLedOn(padapter, pLed); ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if( pLed->bLedOn ) ++ SwLedOff(padapter, pLed); ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ case LED_TXRX_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ ++ if( !pLed->bLedOn ) ++ SwLedOn(padapter, pLed); ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ ++ if( pLed->bLedOn ) ++ SwLedOff(padapter, pLed); ++ ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ case LED_BLINK_WPS: ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ break; ++ ++ case LED_BLINK_WPS_STOP: //WPS success ++ if(pLed->BlinkingLedState == RTW_LED_ON) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA); ++ bStopBlinking = _FALSE; ++ } ++ else ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ break; ++ ++ ++ default: ++ break; ++ } ++ ++} ++ ++ ++static void ++SwLedBlink4( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ PLED_871x pLed1 = &(ledpriv->SwLed1); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ if(!pLed1->bLedWPSBlinkInProgress && pLed1->BlinkingLedState == LED_UNKNOWN) ++ { ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ pLed1->CurrLedState = RTW_LED_OFF; ++ SwLedOff(padapter, pLed1); ++ } ++ ++ switch(pLed->CurrLedState) ++ { ++ case LED_BLINK_SLOWLY: ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ break; ++ ++ case LED_BLINK_StartToBlink: ++ if( pLed->bLedOn ) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ break; ++ ++ case LED_SCAN_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _FALSE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ } ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ case LED_TXRX_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ } ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ case LED_BLINK_WPS: ++ if( pLed->bLedOn ) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ break; ++ ++ case LED_BLINK_WPS_STOP: //WPS authentication fail ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ break; ++ ++ case LED_BLINK_WPS_STOP_OVERLAP: //WPS session overlap ++ pLed->BlinkTimes--; ++ if(pLed->BlinkTimes == 0) ++ { ++ if(pLed->bLedOn) ++ { ++ pLed->BlinkTimes = 1; ++ } ++ else ++ { ++ bStopBlinking = _TRUE; ++ } ++ } ++ ++ if(bStopBlinking) ++ { ++ pLed->BlinkTimes = 10; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ break; ++ ++ ++ default: ++ break; ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("SwLedBlink4 CurrLedState %d\n", pLed->CurrLedState)); ++ ++ ++} ++ ++static void ++SwLedBlink5( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ switch(pLed->CurrLedState) ++ { ++ case LED_SCAN_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if(pLed->bLedOn) ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ if(!pLed->bLedOn) ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ ++ case LED_TXRX_BLINK: ++ pLed->BlinkTimes--; ++ if( pLed->BlinkTimes == 0 ) ++ { ++ bStopBlinking = _TRUE; ++ } ++ ++ if(bStopBlinking) ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if(pLed->bLedOn) ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ if(!pLed->bLedOn) ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("SwLedBlink5 CurrLedState %d\n", pLed->CurrLedState)); ++ ++ ++} ++ ++static void ++SwLedBlink6( ++ PLED_871x pLed ++ ) ++{ ++ _adapter *padapter = pLed->padapter; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 bStopBlinking = _FALSE; ++ ++ // Change LED according to BlinkingLedState specified. ++ if( pLed->BlinkingLedState == RTW_LED_ON ) ++ { ++ SwLedOn(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes)); ++ } ++ else ++ { ++ SwLedOff(padapter, pLed); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes)); ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("<==== blink6\n")); ++} ++ ++ ++// ++// Description: ++// Callback function of LED BlinkTimer, ++// it just schedules to corresponding BlinkWorkItem. ++// ++static void ++BlinkTimerCallback( ++ unsigned long data ++ ) ++{ ++ PLED_871x pLed = (PLED_871x)data; ++ _adapter *padapter = pLed->padapter; ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE)) ++ { ++ //DBG_871X("%s bSurpriseRemoved:%d, bDriverStopped:%d\n", __FUNCTION__, padapter->bSurpriseRemoved, padapter->bDriverStopped); ++ return; ++ } ++ ++#ifdef CONFIG_LED_HANDLED_BY_CMD_THREAD ++ rtw_led_blink_cmd(padapter, pLed); ++#else ++ _set_workitem(&(pLed->BlinkWorkItem)); ++#endif ++} ++ ++// ++// Description: ++// Handler function of LED Blinking. ++// We dispatch acture LED blink action according to LedStrategy. ++// ++void BlinkHandler(PLED_871x pLed) ++{ ++ struct led_priv *ledpriv = &(pLed->padapter->ledpriv); ++ _adapter *padapter = pLed->padapter; ++ ++ //DBG_871X("%s (%s:%d)\n",__FUNCTION__, current->comm, current->pid); ++ ++ if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE)) ++ { ++ //DBG_871X("%s bSurpriseRemoved:%d, bDriverStopped:%d\n", __FUNCTION__, padapter->bSurpriseRemoved, padapter->bDriverStopped); ++ return; ++ } ++ ++ switch(ledpriv->LedStrategy) ++ { ++ case SW_LED_MODE0: ++ SwLedBlink(pLed); ++ break; ++ ++ case SW_LED_MODE1: ++ SwLedBlink1(pLed); ++ break; ++ ++ case SW_LED_MODE2: ++ SwLedBlink2(pLed); ++ break; ++ ++ case SW_LED_MODE3: ++ SwLedBlink3(pLed); ++ break; ++ ++ case SW_LED_MODE4: ++ SwLedBlink4(pLed); ++ break; ++ ++ case SW_LED_MODE5: ++ SwLedBlink5(pLed); ++ break; ++ ++ case SW_LED_MODE6: ++ SwLedBlink6(pLed); ++ break; ++ ++ default: ++ //RT_TRACE(COMP_LED, DBG_LOUD, ("BlinkWorkItemCallback 0x%x \n", pHalData->LedStrategy)); ++ //SwLedBlink(pLed); ++ break; ++ } ++} ++ ++// ++// Description: ++// Callback function of LED BlinkWorkItem. ++// We dispatch acture LED blink action according to LedStrategy. ++// ++static void BlinkWorkItemCallback(struct work_struct *work) ++{ ++ PLED_871x pLed = container_of(work, LED_871x, BlinkWorkItem); ++ BlinkHandler(pLed); ++} ++ ++ ++ ++//================================================================================ ++// Default LED behavior. ++//================================================================================ ++ ++// ++// Description: ++// Implement each led action for SW_LED_MODE0. ++// This is default strategy. ++// ++static void ++SwLedControlMode0( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ PLED_871x pLed = &(ledpriv->SwLed1); ++ ++ // Decide led state ++ switch(LedAction) ++ { ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if( pLed->bLedBlinkInProgress == _FALSE ) ++ { ++ pLed->bLedBlinkInProgress = _TRUE; ++ ++ pLed->CurrLedState = LED_BLINK_NORMAL; ++ pLed->BlinkTimes = 2; ++ ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ break; ++ ++ case LED_CTL_START_TO_LINK: ++ if( pLed->bLedBlinkInProgress == _FALSE ) ++ { ++ pLed->bLedBlinkInProgress = _TRUE; ++ ++ pLed->CurrLedState = LED_BLINK_StartToBlink; ++ pLed->BlinkTimes = 24; ++ ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ } ++ else ++ { ++ pLed->CurrLedState = LED_BLINK_StartToBlink; ++ } ++ break; ++ ++ case LED_CTL_LINK: ++ pLed->CurrLedState = RTW_LED_ON; ++ if( pLed->bLedBlinkInProgress == _FALSE ) ++ { ++ SwLedOn(padapter, pLed); ++ } ++ break; ++ ++ case LED_CTL_NO_LINK: ++ pLed->CurrLedState = RTW_LED_OFF; ++ if( pLed->bLedBlinkInProgress == _FALSE ) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ if(pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ SwLedOff(padapter, pLed); ++ break; ++ ++ case LED_CTL_START_WPS: ++ if( pLed->bLedBlinkInProgress == _FALSE || pLed->CurrLedState == RTW_LED_ON) ++ { ++ pLed->bLedBlinkInProgress = _TRUE; ++ ++ pLed->CurrLedState = LED_BLINK_WPS; ++ pLed->BlinkTimes = 20; ++ ++ if( pLed->bLedOn ) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL); ++ } ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS: ++ if(pLed->bLedBlinkInProgress) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ break; ++ ++ ++ default: ++ break; ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState)); ++ ++} ++ ++ //ALPHA, added by chiyoko, 20090106 ++static void ++SwLedControlMode1( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ PLED_871x pLed = &(ledpriv->SwLed0); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO) ++ pLed = &(ledpriv->SwLed1); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_POWER_ON: ++ case LED_CTL_START_TO_LINK: ++ case LED_CTL_NO_LINK: ++ if( pLed->bLedNoLinkBlinkInProgress == _FALSE ) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if( pLed->bLedLinkBlinkInProgress == _TRUE ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_LINK: ++ if( pLed->bLedLinkBlinkInProgress == _FALSE ) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_NORMAL; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_SITE_SURVEY: ++ if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)) ++ ; ++ else if(pLed->bLedScanBlinkInProgress ==_FALSE) ++ { ++ if(IS_LED_WPS_BLINKING(pLed)) ++ return; ++ ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress == _TRUE ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedScanBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_SCAN_BLINK; ++ pLed->BlinkTimes = 24; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if(pLed->bLedBlinkInProgress ==_FALSE) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress == _TRUE ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ pLed->bLedBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_TXRX_BLINK; ++ pLed->BlinkTimes = 2; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_START_WPS: //wait until xinpin finish ++ case LED_CTL_START_WPS_BOTTON: ++ if(pLed->bLedWPSBlinkInProgress ==_FALSE) ++ { ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress == _TRUE ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedScanBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_WPS; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ ++ case LED_CTL_STOP_WPS: ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress == _TRUE ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedScanBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ } ++ else ++ { ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ } ++ ++ pLed->CurrLedState = LED_BLINK_WPS_STOP; ++ if(pLed->bLedOn) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS_FAIL: ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if( pLed->bLedNoLinkBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedWPSBlinkInProgress ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ ++ SwLedOff(padapter, pLed); ++ break; ++ ++ default: ++ break; ++ ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState)); ++} ++ ++ //Arcadyan/Sitecom , added by chiyoko, 20090216 ++static void ++SwLedControlMode2( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ PLED_871x pLed = &(ledpriv->SwLed0); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_SITE_SURVEY: ++ if(pmlmepriv->LinkDetectInfo.bBusyTraffic) ++ ; ++ else if(pLed->bLedScanBlinkInProgress ==_FALSE) ++ { ++ if(IS_LED_WPS_BLINKING(pLed)) ++ return; ++ ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedScanBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_SCAN_BLINK; ++ pLed->BlinkTimes = 24; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if((pLed->bLedBlinkInProgress ==_FALSE) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ ++ pLed->bLedBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_TXRX_BLINK; ++ pLed->BlinkTimes = 2; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_LINK: ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ case LED_CTL_START_WPS: //wait until xinpin finish ++ case LED_CTL_START_WPS_BOTTON: ++ if(pLed->bLedWPSBlinkInProgress ==_FALSE) ++ { ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedScanBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS: ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ if(padapter->pwrctrlpriv.rf_pwrstate != rf_on) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS_FAIL: ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ if(padapter->pwrctrlpriv.rf_pwrstate != rf_on) ++ { ++ SwLedOff(padapter, pLed); ++ } ++ else ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++ } ++ break; ++ ++ case LED_CTL_START_TO_LINK: ++ case LED_CTL_NO_LINK: ++ if(!IS_LED_BLINKING(pLed)) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedWPSBlinkInProgress ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ default: ++ break; ++ ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++} ++ ++ //COREGA, added by chiyoko, 20090316 ++ static void ++ SwLedControlMode3( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ PLED_871x pLed = &(ledpriv->SwLed0); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_SITE_SURVEY: ++ if(pmlmepriv->LinkDetectInfo.bBusyTraffic) ++ ; ++ else if(pLed->bLedScanBlinkInProgress ==_FALSE) ++ { ++ if(IS_LED_WPS_BLINKING(pLed)) ++ return; ++ ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedScanBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_SCAN_BLINK; ++ pLed->BlinkTimes = 24; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if((pLed->bLedBlinkInProgress ==_FALSE) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ ++ pLed->bLedBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_TXRX_BLINK; ++ pLed->BlinkTimes = 2; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_LINK: ++ if(IS_LED_WPS_BLINKING(pLed)) ++ return; ++ ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ case LED_CTL_START_WPS: //wait until xinpin finish ++ case LED_CTL_START_WPS_BOTTON: ++ if(pLed->bLedWPSBlinkInProgress ==_FALSE) ++ { ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedScanBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_WPS; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS: ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ else ++ { ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ } ++ ++ pLed->CurrLedState = LED_BLINK_WPS_STOP; ++ if(pLed->bLedOn) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ ++ break; ++ ++ case LED_CTL_STOP_WPS_FAIL: ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ case LED_CTL_START_TO_LINK: ++ case LED_CTL_NO_LINK: ++ if(!IS_LED_BLINKING(pLed)) ++ { ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedWPSBlinkInProgress ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ default: ++ break; ++ ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); ++} ++ ++ ++ //Edimax-Belkin, added by chiyoko, 20090413 ++static void ++SwLedControlMode4( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ PLED_871x pLed = &(ledpriv->SwLed0); ++ PLED_871x pLed1 = &(ledpriv->SwLed1); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_START_TO_LINK: ++ if(pLed1->bLedWPSBlinkInProgress) ++ { ++ pLed1->bLedWPSBlinkInProgress = _FALSE; ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ pLed1->CurrLedState = RTW_LED_OFF; ++ ++ if(pLed1->bLedOn) ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ ++ if( pLed->bLedStartToLinkBlinkInProgress == _FALSE ) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedNoLinkBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedStartToLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_StartToBlink; ++ if( pLed->bLedOn ) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ } ++ break; ++ ++ case LED_CTL_LINK: ++ case LED_CTL_NO_LINK: ++ //LED1 settings ++ if(LedAction == LED_CTL_LINK) ++ { ++ if(pLed1->bLedWPSBlinkInProgress) ++ { ++ pLed1->bLedWPSBlinkInProgress = _FALSE; ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ pLed1->CurrLedState = RTW_LED_OFF; ++ ++ if(pLed1->bLedOn) ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ } ++ ++ if( pLed->bLedNoLinkBlinkInProgress == _FALSE ) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_SITE_SURVEY: ++ if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)) ++ ; ++ else if(pLed->bLedScanBlinkInProgress ==_FALSE) ++ { ++ if(IS_LED_WPS_BLINKING(pLed)) ++ return; ++ ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedScanBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_SCAN_BLINK; ++ pLed->BlinkTimes = 24; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if(pLed->bLedBlinkInProgress ==_FALSE) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed)) ++ { ++ return; ++ } ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ pLed->bLedBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_TXRX_BLINK; ++ pLed->BlinkTimes = 2; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_START_WPS: //wait until xinpin finish ++ case LED_CTL_START_WPS_BOTTON: ++ if(pLed1->bLedWPSBlinkInProgress) ++ { ++ pLed1->bLedWPSBlinkInProgress = _FALSE; ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ pLed1->CurrLedState = RTW_LED_OFF; ++ ++ if(pLed1->bLedOn) ++ _set_timer(&(pLed->BlinkTimer), 0); ++ } ++ ++ if(pLed->bLedWPSBlinkInProgress ==_FALSE) ++ { ++ if(pLed->bLedNoLinkBlinkInProgress == _TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if(pLed->bLedScanBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ pLed->bLedWPSBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_WPS; ++ if( pLed->bLedOn ) ++ { ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL); ++ } ++ else ++ { ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ } ++ } ++ break; ++ ++ case LED_CTL_STOP_WPS: //WPS connect success ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ ++ break; ++ ++ case LED_CTL_STOP_WPS_FAIL: //WPS authentication fail ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ ++ //LED1 settings ++ if(pLed1->bLedWPSBlinkInProgress) ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ else ++ pLed1->bLedWPSBlinkInProgress = _TRUE; ++ ++ pLed1->CurrLedState = LED_BLINK_WPS_STOP; ++ if( pLed1->bLedOn ) ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed1->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ ++ break; ++ ++ case LED_CTL_STOP_WPS_FAIL_OVERLAP: //WPS session overlap ++ if(pLed->bLedWPSBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed->bLedNoLinkBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_BLINK_SLOWLY; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA); ++ ++ //LED1 settings ++ if(pLed1->bLedWPSBlinkInProgress) ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ else ++ pLed1->bLedWPSBlinkInProgress = _TRUE; ++ ++ pLed1->CurrLedState = LED_BLINK_WPS_STOP_OVERLAP; ++ pLed1->BlinkTimes = 10; ++ if( pLed1->bLedOn ) ++ pLed1->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed1->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL); ++ ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ ++ if( pLed->bLedNoLinkBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedNoLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedLinkBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedLinkBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedWPSBlinkInProgress ) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedWPSBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedScanBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedScanBlinkInProgress = _FALSE; ++ } ++ if( pLed->bLedStartToLinkBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedStartToLinkBlinkInProgress = _FALSE; ++ } ++ ++ if( pLed1->bLedWPSBlinkInProgress ) ++ { ++ _cancel_timer_ex(&(pLed1->BlinkTimer)); ++ pLed1->bLedWPSBlinkInProgress = _FALSE; ++ } ++ ++ pLed1->BlinkingLedState = LED_UNKNOWN; ++ SwLedOff(padapter, pLed); ++ SwLedOff(padapter, pLed1); ++ break; ++ ++ default: ++ break; ++ ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState)); ++} ++ ++ ++ ++ //Sercomm-Belkin, added by chiyoko, 20090415 ++static void ++SwLedControlMode5( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ PLED_871x pLed = &(ledpriv->SwLed0); ++ ++ if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO) ++ pLed = &(ledpriv->SwLed1); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_POWER_ON: ++ case LED_CTL_NO_LINK: ++ case LED_CTL_LINK: //solid blue ++ pLed->CurrLedState = RTW_LED_ON; ++ pLed->BlinkingLedState = RTW_LED_ON; ++ ++ _set_timer(&(pLed->BlinkTimer), 0); ++ break; ++ ++ case LED_CTL_SITE_SURVEY: ++ if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)) ++ ; ++ else if(pLed->bLedScanBlinkInProgress ==_FALSE) ++ { ++ if(pLed->bLedBlinkInProgress ==_TRUE) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ pLed->bLedScanBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_SCAN_BLINK; ++ pLed->BlinkTimes = 24; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_TX: ++ case LED_CTL_RX: ++ if(pLed->bLedBlinkInProgress ==_FALSE) ++ { ++ if(pLed->CurrLedState == LED_SCAN_BLINK) ++ { ++ return; ++ } ++ pLed->bLedBlinkInProgress = _TRUE; ++ pLed->CurrLedState = LED_TXRX_BLINK; ++ pLed->BlinkTimes = 2; ++ if( pLed->bLedOn ) ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ else ++ pLed->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA); ++ } ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ pLed->CurrLedState = RTW_LED_OFF; ++ pLed->BlinkingLedState = RTW_LED_OFF; ++ ++ if( pLed->bLedBlinkInProgress) ++ { ++ _cancel_timer_ex(&(pLed->BlinkTimer)); ++ pLed->bLedBlinkInProgress = _FALSE; ++ } ++ ++ SwLedOff(padapter, pLed); ++ break; ++ ++ default: ++ break; ++ ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState)); ++} ++ ++ //WNC-Corega, added by chiyoko, 20090902 ++static void ++SwLedControlMode6( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ PLED_871x pLed0 = &(ledpriv->SwLed0); ++ ++ switch(LedAction) ++ { ++ case LED_CTL_POWER_ON: ++ case LED_CTL_LINK: ++ case LED_CTL_NO_LINK: ++ _cancel_timer_ex(&(pLed0->BlinkTimer)); ++ pLed0->CurrLedState = RTW_LED_ON; ++ pLed0->BlinkingLedState = RTW_LED_ON; ++ _set_timer(&(pLed0->BlinkTimer), 0); ++ break; ++ ++ case LED_CTL_POWER_OFF: ++ SwLedOff(padapter, pLed0); ++ break; ++ ++ default: ++ break; ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("ledcontrol 6 Led %d\n", pLed0->CurrLedState)); ++} ++ ++ ++// ++// Description: ++// Dispatch LED action according to pHalData->LedStrategy. ++// ++static void ++LedControl871x( ++ _adapter *padapter, ++ LED_CTL_MODE LedAction ++ ) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ ++ if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE) ++ ||(padapter->hw_init_completed == _FALSE) ) ++ { ++ return; ++ } ++ ++ ++ if( ledpriv->bRegUseLed == _FALSE) ++ return; ++ ++ //if (!priv->up) ++ // return; ++ ++ //if(priv->bInHctTest) ++ // return; ++ ++ if( (padapter->pwrctrlpriv.rf_pwrstate != rf_on && ++ padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) && ++ (LedAction == LED_CTL_TX || LedAction == LED_CTL_RX || ++ LedAction == LED_CTL_SITE_SURVEY || ++ LedAction == LED_CTL_LINK || ++ LedAction == LED_CTL_NO_LINK || ++ LedAction == LED_CTL_POWER_ON) ) ++ { ++ return; ++ } ++ ++ switch(ledpriv->LedStrategy) ++ { ++ case SW_LED_MODE0: ++ //SwLedControlMode0(padapter, LedAction); ++ break; ++ ++ case SW_LED_MODE1: ++ SwLedControlMode1(padapter, LedAction); ++ break; ++ case SW_LED_MODE2: ++ SwLedControlMode2(padapter, LedAction); ++ break; ++ ++ case SW_LED_MODE3: ++ SwLedControlMode3(padapter, LedAction); ++ break; ++ ++ case SW_LED_MODE4: ++ SwLedControlMode4(padapter, LedAction); ++ break; ++ ++ case SW_LED_MODE5: ++ SwLedControlMode5(padapter, LedAction); ++ break; ++ ++ case SW_LED_MODE6: ++ SwLedControlMode6(padapter, LedAction); ++ break; ++ ++ default: ++ break; ++ } ++ ++ RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("LedStrategy:%d, LedAction %d\n", ledpriv->LedStrategy,LedAction)); ++} ++ ++// ++// Description: ++// Initialize all LED_871x objects. ++// ++void ++rtl8192cu_InitSwLeds( ++ _adapter *padapter ++ ) ++{ ++ struct led_priv *pledpriv = &(padapter->ledpriv); ++ ++ pledpriv->LedControlHandler = LedControl871x; ++ ++ InitLed871x(padapter, &(pledpriv->SwLed0), LED_PIN_LED0); ++ ++ InitLed871x(padapter,&(pledpriv->SwLed1), LED_PIN_LED1); ++} ++ ++ ++// ++// Description: ++// DeInitialize all LED_819xUsb objects. ++// ++void ++rtl8192cu_DeInitSwLeds( ++ _adapter *padapter ++ ) ++{ ++ struct led_priv *ledpriv = &(padapter->ledpriv); ++ ++ DeInitLed871x( &(ledpriv->SwLed0) ); ++ DeInitLed871x( &(ledpriv->SwLed1) ); ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c +new file mode 100644 +index 000000000000..dd4383f5f6d9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c +@@ -0,0 +1,227 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192CU_RECV_C_ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#include ++#include ++ ++#include ++ ++ ++void rtl8192cu_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf) ++{ ++ ++ precvbuf->transfer_len = 0; ++ ++ precvbuf->len = 0; ++ ++ precvbuf->ref_cnt = 0; ++ ++ if(precvbuf->pbuf) ++ { ++ precvbuf->pdata = precvbuf->phead = precvbuf->ptail = precvbuf->pbuf; ++ precvbuf->pend = precvbuf->pdata + MAX_RECVBUF_SZ; ++ } ++ ++} ++ ++int rtl8192cu_init_recv_priv(_adapter *padapter) ++{ ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ int i, res = _SUCCESS; ++ struct recv_buf *precvbuf; ++ ++#ifdef CONFIG_RECV_THREAD_MODE ++ _rtw_init_sema(&precvpriv->recv_sema, 0);//will be removed ++ _rtw_init_sema(&precvpriv->terminate_recvthread_sema, 0);//will be removed ++#endif ++ ++#ifdef PLATFORM_LINUX ++ tasklet_init(&precvpriv->recv_tasklet, ++ (void(*)(unsigned long))rtl8192cu_recv_tasklet, ++ (unsigned long)padapter); ++#endif ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++#ifdef PLATFORM_LINUX ++ precvpriv->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); ++ if(precvpriv->int_in_urb == NULL){ ++ DBG_8192C("alloc_urb for interrupt in endpoint fail !!!!\n"); ++ } ++#endif ++ precvpriv->int_in_buf = rtw_zmalloc(sizeof(INTERRUPT_MSG_FORMAT_EX)); ++ if(precvpriv->int_in_buf == NULL){ ++ DBG_8192C("alloc_mem for interrupt in endpoint fail !!!!\n"); ++ } ++#endif ++ ++ //init recv_buf ++ _rtw_init_queue(&precvpriv->free_recv_buf_queue); ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++ _rtw_init_queue(&precvpriv->recv_buf_pending_queue); ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_RX ++ ++ precvpriv->pallocated_recv_buf = rtw_zmalloc(NR_RECVBUFF *sizeof(struct recv_buf) + 4); ++ if(precvpriv->pallocated_recv_buf==NULL){ ++ res= _FAIL; ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("alloc recv_buf fail!\n")); ++ goto exit; ++ } ++ _rtw_memset(precvpriv->pallocated_recv_buf, 0, NR_RECVBUFF *sizeof(struct recv_buf) + 4); ++ ++ precvpriv->precv_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(precvpriv->pallocated_recv_buf), 4); ++ //precvpriv->precv_buf = precvpriv->pallocated_recv_buf + 4 - ++ // ((uint) (precvpriv->pallocated_recv_buf) &(4-1)); ++ ++ ++ precvbuf = (struct recv_buf*)precvpriv->precv_buf; ++ ++ for(i=0; i < NR_RECVBUFF ; i++) ++ { ++ _rtw_init_listhead(&precvbuf->list); ++ ++ _rtw_spinlock_init(&precvbuf->recvbuf_lock); ++ ++ precvbuf->alloc_sz = MAX_RECVBUF_SZ; ++ ++ res = rtw_os_recvbuf_resource_alloc(padapter, precvbuf); ++ if(res==_FAIL) ++ break; ++ ++ precvbuf->ref_cnt = 0; ++ precvbuf->adapter =padapter; ++ ++ ++ //rtw_list_insert_tail(&precvbuf->list, &(precvpriv->free_recv_buf_queue.queue)); ++ ++ precvbuf++; ++ ++ } ++ ++ precvpriv->free_recv_buf_queue_cnt = NR_RECVBUFF; ++ ++#ifdef PLATFORM_LINUX ++ ++ skb_queue_head_init(&precvpriv->rx_skb_queue); ++ ++#ifdef CONFIG_PREALLOC_RECV_SKB ++ { ++ int i; ++ SIZE_PTR tmpaddr=0; ++ SIZE_PTR alignment=0; ++ struct sk_buff *pskb=NULL; ++ ++ skb_queue_head_init(&precvpriv->free_recv_skb_queue); ++ ++ for(i=0; idev = padapter->pnetdev; ++ ++ tmpaddr = (SIZE_PTR)pskb->data; ++ alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1); ++ skb_reserve(pskb, (RECVBUFF_ALIGN_SZ - alignment)); ++ ++ skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb); ++ } ++ ++ pskb=NULL; ++ ++ } ++ } ++#endif ++ ++#endif ++ ++exit: ++ ++ return res; ++ ++} ++ ++void rtl8192cu_free_recv_priv (_adapter *padapter) ++{ ++ int i; ++ struct recv_buf *precvbuf; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ precvbuf = (struct recv_buf *)precvpriv->precv_buf; ++ ++ for(i=0; i < NR_RECVBUFF ; i++) ++ { ++ rtw_os_recvbuf_resource_free(padapter, precvbuf); ++ precvbuf++; ++ } ++ ++ if(precvpriv->pallocated_recv_buf) ++ rtw_mfree(precvpriv->pallocated_recv_buf, NR_RECVBUFF *sizeof(struct recv_buf) + 4); ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++#ifdef PLATFORM_LINUX ++ if(precvpriv->int_in_urb) ++ { ++ usb_free_urb(precvpriv->int_in_urb); ++ } ++#endif ++ if(precvpriv->int_in_buf) ++ rtw_mfree(precvpriv->int_in_buf, sizeof(INTERRUPT_MSG_FORMAT_EX)); ++#endif ++ ++#ifdef PLATFORM_LINUX ++ ++ if (skb_queue_len(&precvpriv->rx_skb_queue)) { ++ DBG_8192C(KERN_WARNING "rx_skb_queue not empty\n"); ++ } ++ ++ rtw_skb_queue_purge(&precvpriv->rx_skb_queue); ++ ++#ifdef CONFIG_PREALLOC_RECV_SKB ++ ++ if (skb_queue_len(&precvpriv->free_recv_skb_queue)) { ++ DBG_8192C(KERN_WARNING "free_recv_skb_queue not empty, %d\n", skb_queue_len(&precvpriv->free_recv_skb_queue)); ++ } ++ ++ rtw_skb_queue_purge(&precvpriv->free_recv_skb_queue); ++ ++#endif ++ ++#endif ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c +new file mode 100644 +index 000000000000..c7bcae76564d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c +@@ -0,0 +1,1149 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RTL8192C_XMIT_C_ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++#error "Shall be Linux or Windows, but not both!\n" ++#endif ++ ++ ++s32 rtl8192cu_init_xmit_priv(_adapter *padapter) ++{ ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++#ifdef PLATFORM_LINUX ++ tasklet_init(&pxmitpriv->xmit_tasklet, ++ (void(*)(unsigned long))rtl8192cu_xmit_tasklet, ++ (unsigned long)padapter); ++#endif ++ return _SUCCESS; ++} ++ ++void rtl8192cu_free_xmit_priv(_adapter *padapter) ++{ ++} ++ ++u32 rtw_get_ff_hwaddr(struct xmit_frame *pxmitframe) ++{ ++ u32 addr; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ ++ switch(pattrib->qsel) ++ { ++ case 0: ++ case 3: ++ addr = BE_QUEUE_INX; ++ break; ++ case 1: ++ case 2: ++ addr = BK_QUEUE_INX; ++ break; ++ case 4: ++ case 5: ++ addr = VI_QUEUE_INX; ++ break; ++ case 6: ++ case 7: ++ addr = VO_QUEUE_INX; ++ break; ++ case 0x10: ++ addr = BCN_QUEUE_INX; ++ break; ++ case 0x11://BC/MC in PS (HIQ) ++ addr = HIGH_QUEUE_INX; ++ break; ++ case 0x12: ++ addr = MGT_QUEUE_INX; ++ break; ++ default: ++ addr = BE_QUEUE_INX; ++ break; ++ ++ } ++ ++ return addr; ++ ++} ++ ++int urb_zero_packet_chk(_adapter *padapter, int sz) ++{ ++ int blnSetTxDescOffset; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); ++ ++ if ( pdvobj->ishighspeed ) ++ { ++ if ( ( (sz + TXDESC_SIZE) % 512 ) == 0 ) { ++ blnSetTxDescOffset = 1; ++ } else { ++ blnSetTxDescOffset = 0; ++ } ++ } ++ else ++ { ++ if ( ( (sz + TXDESC_SIZE) % 64 ) == 0 ) { ++ blnSetTxDescOffset = 1; ++ } else { ++ blnSetTxDescOffset = 0; ++ } ++ } ++ ++ return blnSetTxDescOffset; ++ ++} ++ ++void rtl8192cu_cal_txdesc_chksum(struct tx_desc *ptxdesc) ++{ ++ u16 *usPtr = (u16*)ptxdesc; ++ u32 count = 16; // (32 bytes / 2 bytes per XOR) => 16 times ++ u32 index; ++ u16 checksum = 0; ++ ++ //Clear first ++ ptxdesc->txdw7 &= cpu_to_le32(0xffff0000); ++ ++ for(index = 0 ; index < count ; index++){ ++ checksum = checksum ^ le16_to_cpu(*(usPtr + index)); ++ } ++ ++ ptxdesc->txdw7 |= cpu_to_le32(0x0000ffff&checksum); ++ ++} ++ ++void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxdesc) ++{ ++ if ((pattrib->encrypt > 0) && !pattrib->bswenc) ++ { ++ switch (pattrib->encrypt) ++ { ++ //SEC_TYPE ++ case _WEP40_: ++ case _WEP104_: ++ ptxdesc->txdw1 |= cpu_to_le32((0x01<<22)&0x00c00000); ++ break; ++ case _TKIP_: ++ case _TKIP_WTMIC_: ++ //ptxdesc->txdw1 |= cpu_to_le32((0x02<<22)&0x00c00000); ++ ptxdesc->txdw1 |= cpu_to_le32((0x01<<22)&0x00c00000); ++ break; ++ case _AES_: ++ ptxdesc->txdw1 |= cpu_to_le32((0x03<<22)&0x00c00000); ++ break; ++ case _NO_PRIVACY_: ++ default: ++ break; ++ ++ } ++ ++ } ++ ++} ++ ++static void fill_txdesc_vcs(struct pkt_attrib *pattrib, u32 *pdw) ++{ ++ //DBG_8192C("cvs_mode=%d\n", pattrib->vcs_mode); ++ ++ switch(pattrib->vcs_mode) ++ { ++ case RTS_CTS: ++ *pdw |= cpu_to_le32(BIT(12)); ++ break; ++ case CTS_TO_SELF: ++ *pdw |= cpu_to_le32(BIT(11)); ++ break; ++ case NONE_VCS: ++ default: ++ break; ++ } ++ ++ if(pattrib->vcs_mode) { ++ *pdw |= cpu_to_le32(BIT(13)); ++ ++ // Set RTS BW ++ if(pattrib->ht_en) ++ { ++ *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40)? cpu_to_le32(BIT(27)):0; ++ ++ if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) ++ *pdw |= cpu_to_le32((0x01<<28)&0x30000000); ++ else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) ++ *pdw |= cpu_to_le32((0x02<<28)&0x30000000); ++ else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) ++ *pdw |= 0; ++ else ++ *pdw |= cpu_to_le32((0x03<<28)&0x30000000); ++ } ++ } ++} ++ ++static void fill_txdesc_phy(struct pkt_attrib *pattrib, u32 *pdw) ++{ ++ //DBG_8192C("bwmode=%d, ch_off=%d\n", pattrib->bwmode, pattrib->ch_offset); ++ ++ if(pattrib->ht_en) ++ { ++ *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40)? cpu_to_le32(BIT(25)):0; ++ ++ if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER) ++ *pdw |= cpu_to_le32((0x01<<20)&0x00300000); ++ else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER) ++ *pdw |= cpu_to_le32((0x02<<20)&0x00300000); ++ else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) ++ *pdw |= 0; ++ else ++ *pdw |= cpu_to_le32((0x03<<20)&0x00300000); ++ } ++} ++ ++static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt) ++{ ++ int pull=0; ++ uint qsel; ++ _adapter *padapter = pxmitframe->padapter; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct tx_desc *ptxdesc = (struct tx_desc *)pmem; ++ struct ht_priv *phtpriv = &pmlmepriv->htpriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ sint bmcst = IS_MCAST(pattrib->ra); ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ ++#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX ++ if((_FALSE == bagg_pkt) && (urb_zero_packet_chk(padapter, sz)==0)) ++ { ++ ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ); ++ pull = 1; ++ pxmitframe->pkt_offset --; ++ } ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ ++ _rtw_memset(ptxdesc, 0, sizeof(struct tx_desc)); ++ ++ if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) ++ { ++ //DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n"); ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f); ++ ++ qsel = (uint)(pattrib->qsel & 0x0000001f); ++ ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00); ++ ++ ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000); ++ ++ fill_txdesc_sectype(pattrib, ptxdesc); ++ ++ if(pattrib->ampdu_en==_TRUE) ++ ptxdesc->txdw1 |= cpu_to_le32(BIT(5));//AGG EN ++ else ++ ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK ++ ++ //offset 8 ++ ++ ++ //offset 12 ++ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000); ++ ++ ++ //offset 16 , offset 20 ++ if (pattrib->qos_en) ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(6));//QoS ++ ++ if ((pattrib->ether_type != 0x888e) && (pattrib->ether_type != 0x0806) && (pattrib->dhcp_pkt != 1)) ++ { ++ //Non EAP & ARP & DHCP type data packet ++ ++ fill_txdesc_vcs(pattrib, &ptxdesc->txdw4); ++ fill_txdesc_phy(pattrib, &ptxdesc->txdw4); ++ ++ ptxdesc->txdw4 |= cpu_to_le32(0x00000008);//RTS Rate=24M ++ ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);// ++ //ptxdesc->txdw5 |= cpu_to_le32(0x0000000b);//DataRate - 54M ++ ++ //use REG_INIDATA_RATE_SEL value ++ ptxdesc->txdw5 |= cpu_to_le32(pdmpriv->INIDATA_RATE[pattrib->mac_id]); ++ ++ if(0)//for driver dbg ++ { ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++ if(pattrib->ht_en) ++ ptxdesc->txdw5 |= cpu_to_le32(BIT(6));//SGI ++ ++ ptxdesc->txdw5 |= cpu_to_le32(0x00000013);//init rate - mcs7 ++ } ++ ++ } ++ else ++ { ++ // EAP data packet and ARP packet. ++ // Use the 1M data rate to send the EAP/ARP packet. ++ // This will maybe make the handshake smooth. ++ ++ ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK ++ ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++ if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(24));// DATA_SHORT ++ ++ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); ++ } ++ ++ //offset 24 ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ if ( pattrib->hw_tcp_csum == 1 ) { ++ // ptxdesc->txdw6 = 0; // clear TCP_CHECKSUM and IP_CHECKSUM. It's zero already!! ++ u8 ip_hdr_offset = 32 + pattrib->hdrlen + pattrib->iv_len + 8; ++ ptxdesc->txdw7 = (1 << 31) | (ip_hdr_offset << 16); ++ DBG_8192C("ptxdesc->txdw7 = %08x\n", ptxdesc->txdw7); ++ } ++#endif ++ } ++ else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG) ++ { ++ //DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n"); ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f); ++ ++ qsel = (uint)(pattrib->qsel&0x0000001f); ++ ptxdesc->txdw1 |= cpu_to_le32((qsel<txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000); ++ ++ //fill_txdesc_sectype(pattrib, ptxdesc); ++ ++ //offset 8 ++#ifdef CONFIG_XMIT_ACK ++ //CCX-TXRPT ack for xmit mgmt frames. ++ if (pxmitframe->ack_report) { ++ ptxdesc->txdw2 |= cpu_to_le32(BIT(19)); ++ #ifdef DBG_CCX ++ DBG_871X("%s set ccx\n", __func__); ++ #endif ++ } ++#endif //CONFIG_XMIT_ACK ++ ++ //offset 12 ++ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000); ++ ++ //offset 16 ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++ //offset 20 ++ ptxdesc->txdw5 |= cpu_to_le32(BIT(17));//retry limit enable ++ if(pattrib->retry_ctrl == _TRUE) ++ { ++#ifdef CONFIG_P2P ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++#ifdef CONFIG_INTEL_WIDI ++ if(padapter->mlmepriv.widi_enable == _TRUE) ++ ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6 ++ else ++#endif //CONFIG_INTEL_WIDI ++ ptxdesc->txdw5 |= cpu_to_le32(0x00080000);//retry limit = 2 ++ } ++ else ++#endif //CONFIG_P2P ++ ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6 ++ } ++ else ++ ptxdesc->txdw5 |= cpu_to_le32(0x00300000);//retry limit = 12 ++ ++#ifdef CONFIG_INTEL_PROXIM ++ if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){ ++ printk("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate); ++ ptxdesc->txdw5 |= cpu_to_le32( pattrib->rate); ++ } ++ else ++#endif ++ { ++ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); ++ } ++ } ++ else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) ++ { ++ DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n"); ++ } ++#ifdef CONFIG_MP_INCLUDED ++ else if((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) ++ { ++ fill_txdesc_for_mp(padapter, ptxdesc); ++ } ++#endif ++ else ++ { ++ DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag); ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32((4)&0x1f);//CAM_ID(MAC_ID) ++ ++ ptxdesc->txdw1 |= cpu_to_le32((6<< 16) & 0x000f0000);//raid ++ ++ //offset 8 ++ ++ //offset 12 ++ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000); ++ ++ //offset 16 ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++ //offset 20 ++ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate)); ++ } ++ ++ // 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. ++ // (1) The sequence number of each non-Qos frame / broadcast / multicast / ++ // mgnt frame should be controled by Hw because Fw will also send null data ++ // which we cannot control when Fw LPS enable. ++ // --> default enable non-Qos data sequense number. 2010.06.23. by tynli. ++ // (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. ++ // (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. ++ // 2010.06.23. Added by tynli. ++ if(!pattrib->qos_en) ++ { ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number ++ ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29. ++ } ++ ++ //offset 0 ++ ptxdesc->txdw0 |= cpu_to_le32(sz&0x0000ffff); ++ ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); ++ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<txdw0 |= cpu_to_le32(BIT(24)); ++ } ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("offset0-txdesc=0x%x\n", ptxdesc->txdw0)); ++ ++ //offset 4 ++ // pkt_offset, unit:8 bytes padding ++ if (pxmitframe->pkt_offset > 0) ++ ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000); ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ if (pxmitframe->agg_num > 1) ++ ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << 24) & 0xff000000); ++#endif ++ ++ rtl8192cu_cal_txdesc_chksum(ptxdesc); ++ ++ return pull; ++ ++} ++ ++static s32 rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ s32 ret = _SUCCESS; ++ s32 inner_ret = _SUCCESS; ++ int t, sz, w_sz, pull=0; ++ u8 *mem_addr; ++ u32 ff_hwaddr; ++ struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ if ((pxmitframe->frame_tag == DATA_FRAMETAG) && ++ (pxmitframe->attrib.ether_type != 0x0806) && ++ (pxmitframe->attrib.ether_type != 0x888e) && ++ (pxmitframe->attrib.dhcp_pkt != 1)) ++ { ++ rtw_issue_addbareq_cmd(padapter, pxmitframe); ++ } ++ ++ mem_addr = pxmitframe->buf_addr; ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_dump_xframe()\n")); ++ ++ for (t = 0; t < pattrib->nr_frags; t++) ++ { ++ if (inner_ret != _SUCCESS && ret == _SUCCESS) ++ ret = _FAIL; ++ ++ if (t != (pattrib->nr_frags - 1)) ++ { ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("pattrib->nr_frags=%d\n", pattrib->nr_frags)); ++ ++ sz = pxmitpriv->frag_len; ++ sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len); ++ } ++ else //no frag ++ { ++ sz = pattrib->last_txcmdsz; ++ } ++ ++ pull = update_txdesc(pxmitframe, mem_addr, sz, _FALSE); ++ ++ if(pull) ++ { ++ mem_addr += PACKET_OFFSET_SZ; //pull txdesc head ++ ++ //pxmitbuf ->pbuf = mem_addr; ++ pxmitframe->buf_addr = mem_addr; ++ ++ w_sz = sz + TXDESC_SIZE; ++ } ++ else ++ { ++ w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ; ++ } ++ ++ ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe); ++ ++ inner_ret = rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf); ++ ++ rtw_count_tx_stats(padapter, pxmitframe, sz); ++ ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_write_port, w_sz=%d\n", w_sz)); ++ //DBG_8192C("rtw_write_port, w_sz=%d, sz=%d, txdesc_sz=%d, tid=%d\n", w_sz, sz, w_sz-sz, pattrib->priority); ++ ++ mem_addr += w_sz; ++ ++ mem_addr = (u8 *)RND4(((SIZE_PTR)(mem_addr))); ++ ++ } ++ ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ if (ret != _SUCCESS) ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN); ++ ++ return ret; ++} ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++static u32 xmitframe_need_length(struct xmit_frame *pxmitframe) ++{ ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ ++ u32 len = 0; ++ ++ // no consider fragement ++ len = pattrib->hdrlen + pattrib->iv_len + ++ SNAP_SIZE + sizeof(u16) + ++ pattrib->pktlen + ++ ((pattrib->bswenc) ? pattrib->icv_len : 0); ++ ++ if(pattrib->encrypt ==_TKIP_) ++ len += 8; ++ ++ return len; ++} ++ ++#define IDEA_CONDITION 1 // check all packets before enqueue ++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct xmit_frame *pxmitframe = NULL; ++ struct xmit_frame *pfirstframe = NULL; ++ ++ // aggregate variable ++ struct hw_xmit *phwxmit; ++ struct sta_info *psta = NULL; ++ struct tx_servq *ptxservq = NULL; ++ ++ _irqL irqL; ++ _list *xmitframe_plist = NULL, *xmitframe_phead = NULL; ++ ++ u32 pbuf; // next pkt address ++ u32 pbuf_tail; // last pkt tail ++ u32 len; // packet length, except TXDESC_SIZE and PKT_OFFSET ++ ++ u32 bulkSize = pHalData->UsbBulkOutSize; ++ u8 descCount; ++ u32 bulkPtr; ++ ++ // dump frame variable ++ u32 ff_hwaddr; ++ ++#ifndef IDEA_CONDITION ++ int res = _SUCCESS; ++#endif ++ ++ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n")); ++ ++ ++ // check xmitbuffer is ok ++ if (pxmitbuf == NULL) { ++ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); ++ if (pxmitbuf == NULL) return _FALSE; ++ } ++ ++ ++ //3 1. pick up first frame ++ do { ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry); ++ if (pxmitframe == NULL) { ++ // no more xmit frame, release xmit buffer ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++ return _FALSE; ++ } ++ ++ ++#ifndef IDEA_CONDITION ++ if (pxmitframe->frame_tag != DATA_FRAMETAG) { ++ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ++ ("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n", ++ pxmitframe->frame_tag, DATA_FRAMETAG)); ++// rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ continue; ++ } ++ ++ // TID 0~15 ++ if ((pxmitframe->attrib.priority < 0) || ++ (pxmitframe->attrib.priority > 15)) { ++ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ++ ("xmitframe_complete: TID(%d) should be 0~15!\n", ++ pxmitframe->attrib.priority)); ++// rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ continue; ++ } ++#endif ++ ++ pxmitframe->pxmitbuf = pxmitbuf; ++ pxmitframe->buf_addr = pxmitbuf->pbuf; ++ pxmitbuf->priv_data = pxmitframe; ++ ++ //pxmitframe->agg_num = 1; // alloc xmitframe should assign to 1. ++ pxmitframe->pkt_offset = 1; // first frame of aggregation, reserve offset ++ ++ ++ if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) { ++ DBG_871X("%s coalesce 1st xmitframe failed \n",__FUNCTION__); ++ continue; ++ } ++ ++ ++ // always return ndis_packet after rtw_xmitframe_coalesce ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ ++ break; ++ } while (1); ++ ++ //3 2. aggregate same priority and same DA(AP or STA) frames ++ pfirstframe = pxmitframe; ++ len = xmitframe_need_length(pfirstframe) + TXDESC_OFFSET; ++ pbuf_tail = len; ++ pbuf = _RND8(pbuf_tail); ++ ++ // check pkt amount in one bluk ++ descCount = 0; ++ bulkPtr = bulkSize; ++ if (pbuf < bulkPtr) ++ descCount++; ++ else { ++ descCount = 0; ++ bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize; // round to next bulkSize ++ } ++ ++ // dequeue same priority packet from station tx queue ++ psta = pfirstframe->attrib.psta; ++ switch (pfirstframe->attrib.priority) { ++ case 1: ++ case 2: ++ ptxservq = &(psta->sta_xmitpriv.bk_q); ++ phwxmit = pxmitpriv->hwxmits + 3; ++ break; ++ ++ case 4: ++ case 5: ++ ptxservq = &(psta->sta_xmitpriv.vi_q); ++ phwxmit = pxmitpriv->hwxmits + 1; ++ break; ++ ++ case 6: ++ case 7: ++ ptxservq = &(psta->sta_xmitpriv.vo_q); ++ phwxmit = pxmitpriv->hwxmits; ++ break; ++ ++ case 0: ++ case 3: ++ default: ++ ptxservq = &(psta->sta_xmitpriv.be_q); ++ phwxmit = pxmitpriv->hwxmits + 2; ++ break; ++ } ++ ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ xmitframe_phead = get_list_head(&ptxservq->sta_pending); ++ xmitframe_plist = get_next(xmitframe_phead); ++ while (rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist) == _FALSE) ++ { ++ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list); ++ xmitframe_plist = get_next(xmitframe_plist); ++ ++ len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE; // no offset ++ if (pbuf + len > MAX_XMITBUF_SZ) break; ++ ++ rtw_list_delete(&pxmitframe->list); ++ ptxservq->qcnt--; ++ phwxmit->accnt--; ++ ++#ifndef IDEA_CONDITION ++ // suppose only data frames would be in queue ++ if (pxmitframe->frame_tag != DATA_FRAMETAG) { ++ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ++ ("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n", ++ pxmitframe->frame_tag, DATA_FRAMETAG)); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ continue; ++ } ++ ++ // TID 0~15 ++ if ((pxmitframe->attrib.priority < 0) || ++ (pxmitframe->attrib.priority > 15)) { ++ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_, ++ ("xmitframe_complete: TID(%d) should be 0~15!\n", ++ pxmitframe->attrib.priority)); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ continue; ++ } ++#endif ++ ++// pxmitframe->pxmitbuf = pxmitbuf; ++ pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf; ++ ++ pxmitframe->agg_num = 0; // not first frame of aggregation ++ pxmitframe->pkt_offset = 0; // not first frame of aggregation, no need to reserve offset ++ ++ if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) { ++ DBG_871X("%s coalesce failed \n",__FUNCTION__); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ continue; ++ } ++ ++ // always return ndis_packet after rtw_xmitframe_coalesce ++ rtw_os_xmit_complete(padapter, pxmitframe); ++ ++ // (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz ++ update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz, _TRUE); ++ ++ // don't need xmitframe any more ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ // handle pointer and stop condition ++ pbuf_tail = pbuf + len; ++ pbuf = _RND8(pbuf_tail); ++ ++ pfirstframe->agg_num++; ++ if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num) ++ break; ++ ++ if (pbuf < bulkPtr) { ++ descCount++; ++ if (descCount == pHalData->UsbTxAggDescNum) ++ break; ++ } else { ++ descCount = 0; ++ bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize; ++ } ++ } ++ if (_rtw_queue_empty(&ptxservq->sta_pending) == _TRUE) ++ rtw_list_delete(&ptxservq->tx_pending); ++ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ if ((pfirstframe->attrib.ether_type != 0x0806) && ++ (pfirstframe->attrib.ether_type != 0x888e) && ++ (pfirstframe->attrib.dhcp_pkt != 1)) ++ { ++ rtw_issue_addbareq_cmd(padapter, pfirstframe); ++ } ++ ++#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX ++ //3 3. update first frame txdesc ++ if ((pbuf_tail % bulkSize) == 0) { ++ // remove pkt_offset ++ pbuf_tail -= PACKET_OFFSET_SZ; ++ pfirstframe->buf_addr += PACKET_OFFSET_SZ; ++ pfirstframe->pkt_offset = 0; ++ } ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz, _TRUE); ++ ++ //3 4. write xmit buffer to USB FIFO ++ ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe); ++ ++ // xmit address == ((xmit_frame*)pxmitbuf->priv_data)->buf_addr ++ rtw_write_port(padapter, ff_hwaddr, pbuf_tail, (u8*)pxmitbuf); ++ ++ ++ //3 5. update statisitc ++ pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE); ++ if (pfirstframe->pkt_offset == 1) pbuf_tail -= PACKET_OFFSET_SZ; ++ ++ rtw_count_tx_stats(padapter, pfirstframe, pbuf_tail); ++ ++ rtw_free_xmitframe(pxmitpriv, pfirstframe); ++ ++ return _TRUE; ++} ++ ++#else ++ ++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf) ++{ ++ ++ struct hw_xmit *phwxmits; ++ sint hwentry; ++ struct xmit_frame *pxmitframe=NULL; ++ int res=_SUCCESS, xcnt = 0; ++ ++ phwxmits = pxmitpriv->hwxmits; ++ hwentry = pxmitpriv->hwxmit_entry; ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("xmitframe_complete()\n")); ++ ++ if(pxmitbuf==NULL) ++ { ++ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); ++ if(!pxmitbuf) ++ { ++ return _FALSE; ++ } ++ } ++ ++ ++ do ++ { ++ pxmitframe = rtw_dequeue_xframe(pxmitpriv, phwxmits, hwentry); ++ ++ if(pxmitframe) ++ { ++ pxmitframe->pxmitbuf = pxmitbuf; ++ ++ pxmitframe->buf_addr = pxmitbuf->pbuf; ++ ++ pxmitbuf->priv_data = pxmitframe; ++ ++ if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG) ++ { ++ if(pxmitframe->attrib.priority<=15)//TID0~15 ++ { ++ res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe); ++ } ++ ++ rtw_os_xmit_complete(padapter, pxmitframe);//always return ndis_packet after rtw_xmitframe_coalesce ++ } ++ ++ ++ RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("xmitframe_complete(): rtw_dump_xframe\n")); ++ ++ ++ if(res == _SUCCESS) ++ { ++ rtw_dump_xframe(padapter, pxmitframe); ++ } ++ else ++ { ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ } ++ ++ xcnt++; ++ ++ } ++ else ++ { ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++ return _FALSE; ++ } ++ ++ break; ++ ++ }while(0/*xcnt < (NR_XMITFRAME >> 3)*/); ++ ++ return _TRUE; ++ ++} ++#endif ++ ++ ++ ++static s32 xmitframe_direct(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ s32 res = _SUCCESS; ++ ++ ++ res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe); ++ if (res == _SUCCESS) { ++ rtw_dump_xframe(padapter, pxmitframe); ++ } ++ ++ return res; ++} ++ ++/* ++ * Return ++ * _TRUE dump packet directly ++ * _FALSE enqueue packet ++ */ ++static s32 pre_xmitframe(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ _irqL irqL; ++ s32 res; ++ struct xmit_buf *pxmitbuf = NULL; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ ++ if (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0) ++ goto enqueue; ++ ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ goto enqueue; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ goto enqueue; ++#endif ++ ++ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); ++ if (pxmitbuf == NULL) ++ goto enqueue; ++ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ pxmitframe->pxmitbuf = pxmitbuf; ++ pxmitframe->buf_addr = pxmitbuf->pbuf; ++ pxmitbuf->priv_data = pxmitframe; ++ ++ if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) { ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ } ++ ++ return _TRUE; ++ ++enqueue: ++ res = rtw_xmitframe_enqueue(padapter, pxmitframe); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ if (res != _SUCCESS) { ++ RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n")); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ // Trick, make the statistics correct ++ pxmitpriv->tx_pkts--; ++ pxmitpriv->tx_drop++; ++ return _TRUE; ++ } ++ ++ return _FALSE; ++} ++ ++s32 rtl8192cu_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe) ++{ ++ return rtw_dump_xframe(padapter, pmgntframe); ++} ++ ++/* ++ * Return ++ * _TRUE dump packet directly ok ++ * _FALSE temporary can't transmit packets to hardware ++ */ ++s32 rtl8192cu_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ return pre_xmitframe(padapter, pxmitframe); ++} ++ ++s32 rtl8192cu_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe) ++{ ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ s32 err; ++ ++ if ((err=rtw_xmitframe_enqueue(padapter, pxmitframe)) != _SUCCESS) ++ { ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ // Trick, make the statistics correct ++ pxmitpriv->tx_pkts--; ++ pxmitpriv->tx_drop++; ++ } ++ else ++ { ++#ifdef PLATFORM_LINUX ++ tasklet_hi_schedule(&pxmitpriv->xmit_tasklet); ++#endif ++ } ++ ++ return err; ++ ++} ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ ++static void rtl8192cu_hostap_mgnt_xmit_cb(struct urb *urb) ++{ ++#ifdef PLATFORM_LINUX ++ struct sk_buff *skb = (struct sk_buff *)urb->context; ++ ++ //DBG_8192C("%s\n", __FUNCTION__); ++ ++ rtw_skb_free(skb); ++#endif ++} ++ ++s32 rtl8192cu_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt) ++{ ++#ifdef PLATFORM_LINUX ++ u16 fc; ++ int rc, len, pipe; ++ unsigned int bmcst, tid, qsel; ++ struct sk_buff *skb, *pxmit_skb; ++ struct urb *urb; ++ unsigned char *pxmitbuf; ++ struct tx_desc *ptxdesc; ++ struct rtw_ieee80211_hdr *tx_hdr; ++ struct hostapd_priv *phostapdpriv = padapter->phostapdpriv; ++ struct net_device *pnetdev = padapter->pnetdev; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); ++ ++ ++ //DBG_8192C("%s\n", __FUNCTION__); ++ ++ skb = pkt; ++ ++ len = skb->len; ++ tx_hdr = (struct rtw_ieee80211_hdr *)(skb->data); ++ fc = le16_to_cpu(tx_hdr->frame_ctl); ++ bmcst = IS_MCAST(tx_hdr->addr1); ++ ++ if ((fc & RTW_IEEE80211_FCTL_FTYPE) != RTW_IEEE80211_FTYPE_MGMT) ++ goto _exit; ++ ++ pxmit_skb = rtw_skb_alloc(len + TXDESC_SIZE); ++ ++ if(!pxmit_skb) ++ goto _exit; ++ ++ pxmitbuf = pxmit_skb->data; ++ ++ urb = usb_alloc_urb(0, GFP_ATOMIC); ++ if (!urb) { ++ goto _exit; ++ } ++ ++ // ----- fill tx desc ----- ++ ptxdesc = (struct tx_desc *)pxmitbuf; ++ _rtw_memset(ptxdesc, 0, sizeof(*ptxdesc)); ++ ++ //offset 0 ++ ptxdesc->txdw0 |= cpu_to_le32(len&0x0000ffff); ++ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<txdw0 |= cpu_to_le32(OWN | FSG | LSG); ++ ++ if(bmcst) ++ { ++ ptxdesc->txdw0 |= cpu_to_le32(BIT(24)); ++ } ++ ++ //offset 4 ++ ptxdesc->txdw1 |= cpu_to_le32(0x00);//MAC_ID ++ ++ ptxdesc->txdw1 |= cpu_to_le32((0x12<txdw1 |= cpu_to_le32((0x06<< 16) & 0x000f0000);//b mode ++ ++ //offset 8 ++ ++ //offset 12 ++ ptxdesc->txdw3 |= cpu_to_le32((le16_to_cpu(tx_hdr->seq_ctl)<<16)&0xffff0000); ++ ++ //offset 16 ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate ++ ++ //offset 20 ++ ++ ++ //HW append seq ++ ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number ++ ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29. ++ ++ ++ rtl8192cu_cal_txdesc_chksum(ptxdesc); ++ // ----- end of fill tx desc ----- ++ ++ // ++ skb_put(pxmit_skb, len + TXDESC_SIZE); ++ pxmitbuf = pxmitbuf + TXDESC_SIZE; ++ _rtw_memcpy(pxmitbuf, skb->data, len); ++ ++ //DBG_8192C("mgnt_xmit, len=%x\n", pxmit_skb->len); ++ ++ ++ // ----- prepare urb for submit ----- ++ ++ //translate DMA FIFO addr to pipehandle ++ //pipe = ffaddr2pipehdl(pdvobj, MGT_QUEUE_INX); ++ pipe = usb_sndbulkpipe(pdvobj->pusbdev, pHalData->Queue2EPNum[(u8)MGT_QUEUE_INX]&0x0f); ++ ++ usb_fill_bulk_urb(urb, pdvobj->pusbdev, pipe, ++ pxmit_skb->data, pxmit_skb->len, rtl8192cu_hostap_mgnt_xmit_cb, pxmit_skb); ++ ++ urb->transfer_flags |= URB_ZERO_PACKET; ++ usb_anchor_urb(urb, &phostapdpriv->anchored); ++ rc = usb_submit_urb(urb, GFP_ATOMIC); ++ if (rc < 0) { ++ usb_unanchor_urb(urb); ++ kfree_skb(skb); ++ } ++ usb_free_urb(urb); ++ ++ ++_exit: ++ ++ rtw_skb_free(skb); ++ ++#endif ++ ++ return 0; ++ ++} ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c +new file mode 100644 +index 000000000000..edb72c14ef1f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c +@@ -0,0 +1,6260 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_HAL_INIT_C_ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++#include "rtl8192c_sreset.h" ++#endif ++ ++#ifdef CONFIG_IOL ++#include ++#endif ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#ifndef CONFIG_USB_HCI ++ ++#error "CONFIG_USB_HCI shall be on!\n" ++ ++#endif ++ ++#include ++#include ++#include ++ ++#if DISABLE_BB_RF ++ #define HAL_MAC_ENABLE 0 ++ #define HAL_BB_ENABLE 0 ++ #define HAL_RF_ENABLE 0 ++#else ++ #define HAL_MAC_ENABLE 1 ++ #define HAL_BB_ENABLE 1 ++ #define HAL_RF_ENABLE 1 ++#endif ++ ++//endpoint number 1,2,3,4,5 ++// bult in : 1 ++// bult out: 2 (High) ++// bult out: 3 (Normal) for 3 out_ep, (Low) for 2 out_ep ++// interrupt in: 4 ++// bult out: 5 (Low) for 3 out_ep ++ ++ ++static VOID ++_OneOutEpMapping( ++ IN HAL_DATA_TYPE *pHalData ++ ) ++{ ++ //only endpoint number 0x02 ++ ++ pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO ++ pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI ++ pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[0];//BE ++ pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[0];//BK ++ ++ pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN ++ pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT ++ pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH ++ pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD ++} ++ ++ ++static VOID ++_TwoOutEpMapping( ++ IN HAL_DATA_TYPE *pHalData, ++ IN BOOLEAN bWIFICfg ++ ) ++{ ++ ++/* ++#define VO_QUEUE_INX 0 ++#define VI_QUEUE_INX 1 ++#define BE_QUEUE_INX 2 ++#define BK_QUEUE_INX 3 ++#define BCN_QUEUE_INX 4 ++#define MGT_QUEUE_INX 5 ++#define HIGH_QUEUE_INX 6 ++#define TXCMD_QUEUE_INX 7 ++*/ ++ if(bWIFICfg){ // Normal chip && wmm ++ ++ // BK, BE, VI, VO, BCN, CMD,MGT,HIGH,HCCA ++ //{ 0, 1, 0, 1, 0, 0, 0, 0, 0 }; ++ //0:H(end_number=0x02), 1:L (end_number=0x03) ++ ++ pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[1];//VO ++ pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI ++ pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[1];//BE ++ pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[0];//BK ++ ++ pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN ++ pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT ++ pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH ++ pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD ++ } ++ else{//typical setting ++ ++ //BK, BE, VI, VO, BCN, CMD,MGT,HIGH,HCCA ++ //{ 1, 1, 0, 0, 0, 0, 0, 0, 0 }; ++ //0:H(end_number=0x02), 1:L (end_number=0x03) ++ ++ pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO ++ pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI ++ pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[1];//BE ++ pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[1];//BK ++ ++ pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN ++ pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT ++ pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH ++ pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD ++ } ++ ++} ++ ++ ++static VOID _ThreeOutEpMapping( ++ IN HAL_DATA_TYPE *pHalData, ++ IN BOOLEAN bWIFICfg ++ ) ++{ ++ if(bWIFICfg){//for WMM ++ ++ // BK, BE, VI, VO, BCN, CMD,MGT,HIGH,HCCA ++ //{ 1, 2, 1, 0, 0, 0, 0, 0, 0 }; ++ //0:H(end_number=0x02), 1:N(end_number=0x03), 2:L (end_number=0x05) ++ ++ pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO ++ pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[1];//VI ++ pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[2];//BE ++ pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[1];//BK ++ ++ pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN ++ pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT ++ pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH ++ pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD ++ } ++ else{//typical setting ++ ++ // BK, BE, VI, VO, BCN, CMD,MGT,HIGH,HCCA ++ //{ 2, 2, 1, 0, 0, 0, 0, 0, 0 }; ++ //0:H(end_number=0x02), 1:N(end_number=0x03), 2:L (end_number=0x05) ++ pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO ++ pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[1];//VI ++ pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[2];//BE ++ pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[2];//BK ++ ++ pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN ++ pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT ++ pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH ++ pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD ++ } ++ ++} ++ ++static BOOLEAN ++_MappingOutEP( ++ IN PADAPTER pAdapter, ++ IN u8 NumOutPipe ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct registry_priv *pregistrypriv = &pAdapter->registrypriv; ++ ++ BOOLEAN bWIFICfg = (pregistrypriv->wifi_spec) ?_TRUE:_FALSE; ++ ++ BOOLEAN result = _TRUE; ++ ++ switch(NumOutPipe) ++ { ++ case 2: ++ _TwoOutEpMapping(pHalData, bWIFICfg); ++ break; ++ case 3: ++ _ThreeOutEpMapping(pHalData, bWIFICfg); ++ break; ++ case 1: ++ _OneOutEpMapping(pHalData); ++ break; ++ default: ++ result = _FALSE; ++ break; ++ } ++ ++ return result; ++ ++} ++ ++static VOID ++_ConfigChipOutEP( ++ IN PADAPTER pAdapter, ++ IN u8 NumOutPipe ++ ) ++{ ++ u8 value8; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ ++ pHalData->OutEpQueueSel = 0; ++ pHalData->OutEpNumber = 0; ++ ++ // Normal and High queue ++ value8 = rtw_read8(pAdapter, (REG_NORMAL_SIE_EP + 1)); ++ ++ if(value8 & USB_NORMAL_SIE_EP_MASK){ ++ pHalData->OutEpQueueSel |= TX_SELE_HQ; ++ pHalData->OutEpNumber++; ++ } ++ ++#ifdef CONFIG_USB_ONE_OUT_EP ++ return; ++#endif ++ ++ if((value8 >> USB_NORMAL_SIE_EP_SHIFT) & USB_NORMAL_SIE_EP_MASK){ ++ pHalData->OutEpQueueSel |= TX_SELE_NQ; ++ pHalData->OutEpNumber++; ++ } ++ ++ // Low queue ++ value8 = rtw_read8(pAdapter, (REG_NORMAL_SIE_EP + 2)); ++ if(value8 & USB_NORMAL_SIE_EP_MASK){ ++ pHalData->OutEpQueueSel |= TX_SELE_LQ; ++ pHalData->OutEpNumber++; ++ } ++ ++ // TODO: Error recovery for this case ++ //RT_ASSERT((NumOutPipe == pHalData->OutEpNumber), ("Out EP number isn't match! %d(Descriptor) != %d (SIE reg)\n", (u4Byte)NumOutPipe, (u4Byte)pHalData->OutEpNumber)); ++ ++} ++ ++static BOOLEAN HalUsbSetQueuePipeMapping8192CUsb( ++ IN PADAPTER pAdapter, ++ IN u8 NumInPipe, ++ IN u8 NumOutPipe ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ BOOLEAN result = _FALSE; ++ ++ _ConfigChipOutEP(pAdapter, NumOutPipe); ++ ++ #ifndef CONFIG_USB_ONE_OUT_EP ++ // Normal chip with one IN and one OUT doesn't have interrupt IN EP. ++ if(1 == pHalData->OutEpNumber){ ++ if(1 != NumInPipe){ ++ return result; ++ } ++ } ++ #endif ++ result = _MappingOutEP(pAdapter, NumOutPipe); ++ ++ return result; ++ ++} ++ ++void rtl8192cu_interface_configure(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ ++ if (pdvobjpriv->ishighspeed == _TRUE) ++ { ++ pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes ++ } ++ else ++ { ++ pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes ++ } ++ ++ pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber; ++ pHalData->RtBulkInPipe = pdvobjpriv->ep_num[0]; ++ pHalData->RtBulkOutPipe[0] = pdvobjpriv->ep_num[1]; ++ pHalData->RtBulkOutPipe[1] = pdvobjpriv->ep_num[2]; ++ pHalData->RtIntInPipe = pdvobjpriv->ep_num[3]; ++ pHalData->RtBulkOutPipe[2] = pdvobjpriv->ep_num[4]; ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ pHalData->UsbTxAggMode = 1; ++ pHalData->UsbTxAggDescNum = 0x6; // only 4 bits ++#endif ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ pHalData->UsbRxAggMode = USB_RX_AGG_DMA;// USB_RX_AGG_DMA; ++ pHalData->UsbRxAggBlockCount = 8; //unit : 512b ++ pHalData->UsbRxAggBlockTimeout = 0x6; ++ pHalData->UsbRxAggPageCount = 48; //uint :128 b //0x0A; // 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize ++ pHalData->UsbRxAggPageTimeout = 0x4; //6, absolute time = 34ms/(2^6) ++#endif ++ ++ HalUsbSetQueuePipeMapping8192CUsb(padapter, pdvobjpriv->RtNumInPipes, ++ #ifdef CONFIG_USB_ONE_OUT_EP ++ 1 ++ #else ++ pdvobjpriv->RtNumOutPipes ++ #endif ++ ); ++ ++} ++ ++static u8 _InitPowerOn(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ u8 ret = _SUCCESS; ++ u16 value16=0; ++ u8 value8 = 0; ++ u32 value32 = 0; ++ ++ // polling autoload done. ++ u32 pollingCount = 0; ++ ++ do ++ { ++ if(rtw_read8(padapter, REG_APS_FSMCO) & PFM_ALDN){ ++ //RT_TRACE(COMP_INIT,DBG_LOUD,("Autoload Done!\n")); ++ break; ++ } ++ ++ if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){ ++ //RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n")); ++ return _FAIL; ++ } ++ ++ }while(_TRUE); ++ ++ ++// For hardware power on sequence. ++ ++ //0. RSV_CTRL 0x1C[7:0] = 0x00 // unlock ISO/CLK/Power control register ++ rtw_write8(padapter, REG_RSV_CTRL, 0x0); ++ // Power on when re-enter from IPS/Radio off/card disable ++ rtw_write8(padapter, REG_SPS0_CTRL, 0x2b);//enable SPS into PWM mode ++/* ++ value16 = PlatformIORead2Byte(Adapter, REG_AFE_XTAL_CTRL);//enable AFE clock ++ value16 &= (~XTAL_GATE_AFE); ++ PlatformIOWrite2Byte(Adapter,REG_AFE_XTAL_CTRL, value16 ); ++*/ ++ ++ rtw_udelay_os(100);//PlatformSleepUs(150);//this is not necessary when initially power on ++ ++ value8 = rtw_read8(padapter, REG_LDOV12D_CTRL); ++ if(0== (value8 & LDV12_EN) ){ ++ value8 |= LDV12_EN; ++ rtw_write8(padapter, REG_LDOV12D_CTRL, value8); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" power-on :REG_LDOV12D_CTRL Reg0x21:0x%02x.\n",value8)); ++ rtw_udelay_os(100);//PlatformSleepUs(100);//this is not necessary when initially power on ++ value8 = rtw_read8(padapter, REG_SYS_ISO_CTRL); ++ value8 &= ~ISO_MD2PP; ++ rtw_write8(padapter, REG_SYS_ISO_CTRL, value8); ++ } ++ ++ // auto enable WLAN ++ pollingCount = 0; ++ value16 = rtw_read16(padapter, REG_APS_FSMCO); ++ value16 |= APFM_ONMAC; ++ rtw_write16(padapter, REG_APS_FSMCO, value16); ++ ++ do ++ { ++ if(0 == (rtw_read16(padapter, REG_APS_FSMCO) & APFM_ONMAC)){ ++ //RT_TRACE(COMP_INIT,DBG_LOUD,("MAC auto ON okay!\n")); ++ break; ++ } ++ ++ if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){ ++ //RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n")); ++ return _FAIL; ++ } ++ ++ }while(_TRUE); ++ ++ //Enable Radio ,GPIO ,and LED function ++ rtw_write16(padapter,REG_APS_FSMCO,0x0812); ++ ++#ifdef CONFIG_AUTOSUSPEND ++ //for usb Combo card ,BT ++ if((BOARD_USB_COMBO == pHalData->BoardType)&&(padapter->registrypriv.usbss_enable)) ++ { ++ value32 = rtw_read32(padapter, REG_APS_FSMCO); ++ value32 |= (SOP_ABG|SOP_AMB|XOP_BTCK); ++ rtw_write32(padapter, REG_APS_FSMCO, value32); ++ } ++#endif ++ ++ // release RF digital isolation ++ value16 = rtw_read16(padapter, REG_SYS_ISO_CTRL); ++ value16 &= ~ISO_DIOR; ++ rtw_write16(padapter, REG_SYS_ISO_CTRL, value16); ++ ++ // Enable MAC DMA/WMAC/SCHEDULE/SEC block ++ value16 = rtw_read16(padapter, REG_CR); ++ value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN ++ | PROTOCOL_EN | SCHEDULE_EN | MACTXEN | MACRXEN | ENSEC); ++ rtw_write16(padapter, REG_CR, value16); ++ ++ //tynli_test for suspend mode. ++ { ++ rtw_write8(padapter, 0xfe10, 0x19); ++ } ++ ++ // 2010/11/22 MH For slim combo debug mode check. ++ if (pHalData->BoardType == BOARD_USB_COMBO) ++ { ++ if (pHalData->SlimComboDbg == _TRUE) ++ { ++ DBG_8192C("SlimComboDbg == TRUE\n"); ++ ++ // 1. SIC?Test Mode ¤¤, Debug Ports ·|¦Û°Ê Enable, ©Ò¥H Driver ¤W¨Ó«á, ++ // ­nÃö±¼½Ð³]©w 0x 00[7] -> "1", ±N¥¦ Disable. effect if not: power consumption increase ++ rtw_write8(padapter, REG_SYS_ISO_CTRL, rtw_read8(padapter, REG_SYS_ISO_CTRL)|BIT7); ++ ++ // 2. SIC?Test Mode ¤¤, GPIO-8?·| report Power State ©Ò¥H Driver ¤W¨Ó«á, ½Ð³]©w? 0x04[6] -> "1" ±N¥¦ Disable ++ // effect if not: GPIO-8 could not be GPIO or LED function ++ rtw_write8(padapter, REG_APS_FSMCO, rtw_read8(padapter, REG_APS_FSMCO)|BIT6); ++ ++ // 3. SIC Test Mode ¤¤, EESK, EECS ·| report?Host Clock status, ©Ò¥H Driver ¤W¨Ó«á, ½Ð³]©w? 0x40[4] -> "1" ±N¥¦¤Á¦¨ EEPROM ¨Ï¥Î Pin (autoload still from Efuse) ++ // effect if not:power consumption increase ++ value8 = rtw_read8(padapter, REG_GPIO_MUXCFG)|BIT4 ; ++ #ifdef CONFIG_BT_COEXIST ++ // 2011/01/26 MH UMB-B cut bug. We need to support the modification. ++ if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) && ++ pHalData->bt_coexist.BT_Coexist) ++ { ++ value8 |= (BIT5); ++ } ++ #endif ++ rtw_write8(padapter, REG_GPIO_MUXCFG,value8 ); ++ ++ ++ // 4. SIC Test Mode ¤¤,?SIC Debug ports ·|¦Û°Ê Enable , ©Ò¥H Driver ¤W¨Ó«á°¨¤W, ½Ð³]©w? 0x40[15:11] -> ¡§0x00¡¨, ±N¥¦Disable ++ // 4.1Two Steps setting for safety: 0x40[15,13,12, 11] -> "0", then ?0x40[14] -> "0" ++ // effect if not: Host could not transfer packets, and GPIO-3,2 will occupied by SIC then Co-exist could not work. ++ rtw_write16(padapter, REG_GPIO_MUXCFG, (rtw_read16(padapter, REG_GPIO_MUXCFG)&0x07FF)|BIT14); ++ rtw_write16(padapter, REG_GPIO_MUXCFG, rtw_read16(padapter, REG_GPIO_MUXCFG)&0x07FF); ++ } ++ } ++ ++ ++ // 2011/02/18 To Fix RU LNA power leakage problem. We need to execute below below in ++ // Adapter init and halt sequence. Accordingto EEchou's opinion, we can enable the ability for all ++ // IC. According to Johnny's opinion, only RU will meet the condition. ++ if (IS_HARDWARE_TYPE_8192C(padapter) && (pHalData->BoardType == BOARD_USB_High_PA)) ++ rtw_write32(padapter, rFPGA0_XCD_RFParameter, rtw_read32(padapter, rFPGA0_XCD_RFParameter)&(~BIT1)); ++ return ret; ++ ++} ++ ++ ++static void _dbg_dump_macreg(_adapter *padapter) ++{ ++ u32 offset = 0; ++ u32 val32 = 0; ++ u32 index =0 ; ++ for(index=0;index<64;index++) ++ { ++ offset = index*4; ++ val32 = rtw_read32(padapter,offset); ++ DBG_8192C("offset : 0x%02x ,val:0x%08x\n",offset,val32); ++ } ++} ++ ++ ++static void _InitPABias(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ u8 pa_setting; ++ BOOLEAN is92C = IS_92C_SERIAL(pHalData->VersionID); ++ ++ //FIXED PA current issue ++ //efuse_one_byte_read(padapter, 0x1FA, &pa_setting); ++ pa_setting = EFUSE_Read1Byte(padapter, 0x1FA); ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("_InitPABias 0x1FA 0x%x \n",pa_setting)); ++ ++ if(!(pa_setting & BIT0)) ++ { ++ PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x0F406); ++ PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x4F406); ++ PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x8F406); ++ PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0xCF406); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path A\n")); ++ } ++ ++ if(!(pa_setting & BIT1) && is92C) ++ { ++ PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x0F406); ++ PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x4F406); ++ PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x8F406); ++ PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0xCF406); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path B\n")); ++ } ++ ++ if(!(pa_setting & BIT4)) ++ { ++ pa_setting = rtw_read8(padapter, 0x16); ++ pa_setting &= 0x0F; ++ rtw_write8(padapter, 0x16, pa_setting | 0x90); ++ } ++} ++#ifdef CONFIG_BT_COEXIST ++static void _InitBTCoexist(_adapter *padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++ u8 u1Tmp; ++ ++ if(pbtpriv->BT_Coexist && pbtpriv->BT_CoexistType == BT_CSR_BC4) ++ { ++ ++#if MP_DRIVER != 1 ++ if(pbtpriv->BT_Ant_isolation) ++ { ++ rtw_write8( padapter,REG_GPIO_MUXCFG, 0xa0); ++ DBG_8192C("BT write 0x%x = 0x%x\n", REG_GPIO_MUXCFG, 0xa0); ++ } ++#endif ++ ++ u1Tmp = rtw_read8(padapter, 0x4fd) & BIT0; ++ u1Tmp = u1Tmp | ++ ((pbtpriv->BT_Ant_isolation==1)?0:BIT1) | ++ ((pbtpriv->BT_Service==BT_SCO)?0:BIT2); ++ rtw_write8( padapter, 0x4fd, u1Tmp); ++ DBG_8192C("BT write 0x%x = 0x%x for non-isolation\n", 0x4fd, u1Tmp); ++ ++ ++ rtw_write32(padapter, REG_BT_COEX_TABLE+4, 0xaaaa9aaa); ++ DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+4, 0xaaaa9aaa); ++ ++ rtw_write32(padapter, REG_BT_COEX_TABLE+8, 0xffbd0040); ++ DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+8, 0xffbd0040); ++ ++ rtw_write32(padapter, REG_BT_COEX_TABLE+0xc, 0x40000010); ++ DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+0xc, 0x40000010); ++ ++ //Config to 1T1R ++ u1Tmp = rtw_read8(padapter,rOFDM0_TRxPathEnable); ++ u1Tmp &= ~(BIT1); ++ rtw_write8( padapter, rOFDM0_TRxPathEnable, u1Tmp); ++ DBG_8192C("BT write 0xC04 = 0x%x\n", u1Tmp); ++ ++ u1Tmp = rtw_read8(padapter, rOFDM1_TRxPathEnable); ++ u1Tmp &= ~(BIT1); ++ rtw_write8( padapter, rOFDM1_TRxPathEnable, u1Tmp); ++ DBG_8192C("BT write 0xD04 = 0x%x\n", u1Tmp); ++ ++ } ++} ++#endif ++ ++//------------------------------------------------------------------------- ++// ++// LLT R/W/Init function ++// ++//------------------------------------------------------------------------- ++static u8 _LLTWrite( ++ IN PADAPTER Adapter, ++ IN u32 address, ++ IN u32 data ++ ) ++{ ++ u8 status = _SUCCESS; ++ int count = 0; ++ u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); ++ ++ rtw_write32(Adapter, REG_LLT_INIT, value); ++ ++ //polling ++ do{ ++ ++ value = rtw_read32(Adapter, REG_LLT_INIT); ++ if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){ ++ break; ++ } ++ ++ if(count > POLLING_LLT_THRESHOLD){ ++ //RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling write LLT done at address %d!\n", address)); ++ status = _FAIL; ++ break; ++ } ++ }while(count++); ++ ++ return status; ++ ++} ++ ++ ++static u8 _LLTRead( ++ IN PADAPTER Adapter, ++ IN u32 address ++ ) ++{ ++ int count = 0; ++ u32 value = _LLT_INIT_ADDR(address) | _LLT_OP(_LLT_READ_ACCESS); ++ ++ rtw_write32(Adapter, REG_LLT_INIT, value); ++ ++ //polling and get value ++ do{ ++ ++ value = rtw_read32(Adapter, REG_LLT_INIT); ++ if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){ ++ return (u8)value; ++ } ++ ++ if(count > POLLING_LLT_THRESHOLD){ ++ //RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling read LLT done at address %d!\n", address)); ++ break; ++ } ++ }while(count++); ++ ++ return 0xFF; ++ ++} ++ ++ ++static u8 InitLLTTable( ++ IN PADAPTER Adapter, ++ IN u32 boundary ++ ) ++{ ++ u8 status = _SUCCESS; ++ u32 i; ++ ++#ifdef CONFIG_IOL_LLT ++ if(rtw_IOL_applied(Adapter)) ++ { ++ struct xmit_frame *xmit_frame; ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) ++ return _FAIL; ++ ++ rtw_IOL_append_LLT_cmd(xmit_frame, boundary); ++ status = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000); ++ } ++ else ++#endif ++ { ++ for(i = 0 ; i < (boundary - 1) ; i++){ ++ status = _LLTWrite(Adapter, i , i + 1); ++ if(_SUCCESS != status){ ++ return status; ++ } ++ } ++ ++ // end of list ++ status = _LLTWrite(Adapter, (boundary - 1), 0xFF); ++ if(_SUCCESS != status){ ++ return status; ++ } ++ ++ // Make the other pages as ring buffer ++ // This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. ++ // Otherwise used as local loopback buffer. ++ for(i = boundary ; i < LAST_ENTRY_OF_TX_PKT_BUFFER ; i++){ ++ status = _LLTWrite(Adapter, i, (i + 1)); ++ if(_SUCCESS != status){ ++ return status; ++ } ++ } ++ ++ // Let last entry point to the start entry of ring buffer ++ status = _LLTWrite(Adapter, LAST_ENTRY_OF_TX_PKT_BUFFER, boundary); ++ if(_SUCCESS != status){ ++ return status; ++ } ++ } ++ ++ return status; ++ ++} ++ ++ ++//--------------------------------------------------------------- ++// ++// MAC init functions ++// ++//--------------------------------------------------------------- ++static VOID ++_SetMacID( ++ IN PADAPTER Adapter, u8* MacID ++ ) ++{ ++ u32 i; ++ for(i=0 ; i< MAC_ADDR_LEN ; i++){ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ rtw_write32(Adapter, REG_MACID1+i, MacID[i]); ++ else ++#endif ++ rtw_write32(Adapter, REG_MACID+i, MacID[i]); ++ } ++} ++ ++static VOID ++_SetBSSID( ++ IN PADAPTER Adapter, u8* BSSID ++ ) ++{ ++ u32 i; ++ for(i=0 ; i< MAC_ADDR_LEN ; i++){ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ rtw_write32(Adapter, REG_BSSID1+i, BSSID[i]); ++ else ++#endif ++ rtw_write32(Adapter, REG_BSSID+i, BSSID[i]); ++ } ++} ++ ++ ++// Shall USB interface init this? ++static VOID ++_InitInterrupt( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ ++ // HISR - turn all on ++ value32 = 0xFFFFFFFF; ++ rtw_write32(Adapter, REG_HISR, value32); ++ ++ // HIMR - turn all on ++ rtw_write32(Adapter, REG_HIMR, value32); ++} ++ ++ ++static VOID ++_InitQueueReservedPage( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct registry_priv *pregistrypriv = &Adapter->registrypriv; ++ ++ u32 outEPNum = (u32)pHalData->OutEpNumber; ++ u32 numHQ = 0; ++ u32 numLQ = 0; ++ u32 numNQ = 0; ++ u32 numPubQ; ++ u32 value32; ++ u8 value8; ++ BOOLEAN bWiFiConfig = pregistrypriv->wifi_spec; ++ //u32 txQPageNum, txQPageUnit,txQRemainPage; ++ ++ { //for WMM ++ //RT_ASSERT((outEPNum>=2), ("for WMM ,number of out-ep must more than or equal to 2!\n")); ++ ++ if(pHalData->OutEpQueueSel & TX_SELE_HQ){ ++ numHQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_HPQ:NORMAL_PAGE_NUM_HPQ; ++ } ++ ++ if(pHalData->OutEpQueueSel & TX_SELE_LQ){ ++ numLQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_LPQ:NORMAL_PAGE_NUM_LPQ; ++ } ++ // NOTE: This step shall be proceed before writting REG_RQPN. ++ if(pHalData->OutEpQueueSel & TX_SELE_NQ){ ++ numNQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_NPQ:NORMAL_PAGE_NUM_NPQ; ++ } ++ value8 = (u8)_NPQ(numNQ); ++ rtw_write8(Adapter, REG_RQPN_NPQ, value8); ++ ++ if (bWiFiConfig) ++ numPubQ = WMM_NORMAL_TX_TOTAL_PAGE_NUMBER - numHQ - numLQ - numNQ; ++ else ++ numPubQ = TX_TOTAL_PAGE_NUMBER - numHQ - numLQ - numNQ; ++ } ++ ++ // TX DMA ++ value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN; ++ rtw_write32(Adapter, REG_RQPN, value32); ++} ++ ++static VOID ++_InitTxBufferBoundary( ++ IN PADAPTER Adapter ++ ) ++{ ++ struct registry_priv *pregistrypriv = &Adapter->registrypriv; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ u8 txpktbuf_bndy; ++ ++ if(!pregistrypriv->wifi_spec){ ++ txpktbuf_bndy = TX_PAGE_BOUNDARY; ++ } ++ else{//for WMM ++ txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY; ++ } ++ ++ rtw_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); ++ rtw_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); ++ rtw_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy); ++ rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy); ++#if 1 ++ rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy); ++#else ++ txdmactrl = PlatformIORead2Byte(Adapter, REG_TDECTRL); ++ txdmactrl &= ~BCN_HEAD_MASK; ++ txdmactrl |= BCN_HEAD(txpktbuf_bndy); ++ PlatformIOWrite2Byte(Adapter, REG_TDECTRL, txdmactrl); ++#endif ++} ++ ++static VOID ++_InitPageBoundary( ++ IN PADAPTER Adapter ++ ) ++{ ++ // RX Page Boundary ++ //srand(static_cast(time(NULL)) ); ++ u16 rxff_bndy = 0x27FF;//(rand() % 1) ? 0x27FF : 0x23FF; ++ ++ rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy); ++ ++ // TODO: ?? shall we set tx boundary? ++} ++ ++ ++static VOID ++_InitNormalChipRegPriority( ++ IN PADAPTER Adapter, ++ IN u16 beQ, ++ IN u16 bkQ, ++ IN u16 viQ, ++ IN u16 voQ, ++ IN u16 mgtQ, ++ IN u16 hiQ ++ ) ++{ ++ u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7); ++ ++ value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) | ++ _TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) | ++ _TXDMA_MGQ_MAP(mgtQ)| _TXDMA_HIQ_MAP(hiQ); ++ ++ rtw_write16(Adapter, REG_TRXDMA_CTRL, value16); ++} ++ ++static VOID ++_InitNormalChipOneOutEpPriority( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ u16 value = 0; ++ switch(pHalData->OutEpQueueSel) ++ { ++ case TX_SELE_HQ: ++ value = QUEUE_HIGH; ++ break; ++ case TX_SELE_LQ: ++ value = QUEUE_LOW; ++ break; ++ case TX_SELE_NQ: ++ value = QUEUE_NORMAL; ++ break; ++ default: ++ //RT_ASSERT(FALSE,("Shall not reach here!\n")); ++ break; ++ } ++ ++ _InitNormalChipRegPriority(Adapter, ++ value, ++ value, ++ value, ++ value, ++ value, ++ value ++ ); ++ ++} ++ ++static VOID ++_InitNormalChipTwoOutEpPriority( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct registry_priv *pregistrypriv = &Adapter->registrypriv; ++ u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ; ++ ++ ++ u16 valueHi = 0; ++ u16 valueLow = 0; ++ ++ switch(pHalData->OutEpQueueSel) ++ { ++ case (TX_SELE_HQ | TX_SELE_LQ): ++ valueHi = QUEUE_HIGH; ++ valueLow = QUEUE_LOW; ++ break; ++ case (TX_SELE_NQ | TX_SELE_LQ): ++ valueHi = QUEUE_NORMAL; ++ valueLow = QUEUE_LOW; ++ break; ++ case (TX_SELE_HQ | TX_SELE_NQ): ++ valueHi = QUEUE_HIGH; ++ valueLow = QUEUE_NORMAL; ++ break; ++ default: ++ //RT_ASSERT(FALSE,("Shall not reach here!\n")); ++ break; ++ } ++ ++ if(!pregistrypriv->wifi_spec ){ ++ beQ = valueLow; ++ bkQ = valueLow; ++ viQ = valueHi; ++ voQ = valueHi; ++ mgtQ = valueHi; ++ hiQ = valueHi; ++ } ++ else{//for WMM ,CONFIG_OUT_EP_WIFI_MODE ++ beQ = valueLow; ++ bkQ = valueHi; ++ viQ = valueHi; ++ voQ = valueLow; ++ mgtQ = valueHi; ++ hiQ = valueHi; ++ } ++ ++ _InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ); ++ ++} ++ ++static VOID ++_InitNormalChipThreeOutEpPriority( ++ IN PADAPTER Adapter ++ ) ++{ ++ struct registry_priv *pregistrypriv = &Adapter->registrypriv; ++ u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ; ++ ++ if(!pregistrypriv->wifi_spec ){// typical setting ++ beQ = QUEUE_LOW; ++ bkQ = QUEUE_LOW; ++ viQ = QUEUE_NORMAL; ++ voQ = QUEUE_HIGH; ++ mgtQ = QUEUE_HIGH; ++ hiQ = QUEUE_HIGH; ++ } ++ else{// for WMM ++ beQ = QUEUE_LOW; ++ bkQ = QUEUE_NORMAL; ++ viQ = QUEUE_NORMAL; ++ voQ = QUEUE_HIGH; ++ mgtQ = QUEUE_HIGH; ++ hiQ = QUEUE_HIGH; ++ } ++ _InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ); ++} ++ ++static VOID ++_InitNormalChipQueuePriority( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ switch(pHalData->OutEpNumber) ++ { ++ case 1: ++ _InitNormalChipOneOutEpPriority(Adapter); ++ break; ++ case 2: ++ _InitNormalChipTwoOutEpPriority(Adapter); ++ break; ++ case 3: ++ _InitNormalChipThreeOutEpPriority(Adapter); ++ break; ++ default: ++ //RT_ASSERT(FALSE,("Shall not reach here!\n")); ++ break; ++ } ++ ++ ++} ++ ++static VOID ++_InitQueuePriority( ++ IN PADAPTER Adapter ++ ) ++{ ++ _InitNormalChipQueuePriority(Adapter); ++} ++ ++static VOID ++_InitHardwareDropIncorrectBulkOut( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK); ++ value32 |= DROP_DATA_EN; ++ rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32); ++} ++ ++static VOID ++_InitNetworkType( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ ++ value32 = rtw_read32(Adapter, REG_CR); ++ ++ // TODO: use the other function to set network type ++#if RTL8191C_FPGA_NETWORKTYPE_ADHOC ++ value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AD_HOC); ++#else ++ value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP); ++#endif ++ rtw_write32(Adapter, REG_CR, value32); ++// RASSERT(pIoBase->rtw_read8(REG_CR + 2) == 0x2); ++} ++ ++static VOID ++_InitTransferPageSize( ++ IN PADAPTER Adapter ++ ) ++{ ++ // Tx page size is always 128. ++ ++ u8 value8; ++ value8 = _PSRX(PBP_128) | _PSTX(PBP_128); ++ rtw_write8(Adapter, REG_PBP, value8); ++} ++ ++static VOID ++_InitDriverInfoSize( ++ IN PADAPTER Adapter, ++ IN u8 drvInfoSize ++ ) ++{ ++ rtw_write8(Adapter,REG_RX_DRVINFO_SZ, drvInfoSize); ++} ++ ++static VOID ++_InitWMACSetting( ++ IN PADAPTER Adapter ++ ) ++{ ++ //u4Byte value32; ++ //u16 value16; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ //pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; ++ //pHalData->ReceiveConfig = RCR_AAP | RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; ++ // don't turn on AAP, it will allow all packets to driver ++ pHalData->ReceiveConfig = RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; ++ ++#if (0 == RTL8192C_RX_PACKET_NO_INCLUDE_CRC) ++ pHalData->ReceiveConfig |= ACRC32; ++#endif ++ ++ // some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile() ++ rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig); ++ ++ // Accept all multicast address ++ rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF); ++ rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF); ++ ++ ++ // Accept all data frames ++ //value16 = 0xFFFF; ++ //rtw_write16(Adapter, REG_RXFLTMAP2, value16); ++ ++ // 2010.09.08 hpfan ++ // Since ADF is removed from RCR, ps-poll will not be indicate to driver, ++ // RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. ++ //value16 = 0x400; ++ //rtw_write16(Adapter, REG_RXFLTMAP1, value16); ++ ++ // Accept all management frames ++ //value16 = 0xFFFF; ++ //rtw_write16(Adapter, REG_RXFLTMAP0, value16); ++ ++ //enable RX_SHIFT bits ++ //rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1)); ++ ++} ++ ++static VOID ++_InitAdaptiveCtrl( ++ IN PADAPTER Adapter ++ ) ++{ ++ u16 value16; ++ u32 value32; ++ ++ // Response Rate Set ++ value32 = rtw_read32(Adapter, REG_RRSR); ++ value32 &= ~RATE_BITMAP_ALL; ++ value32 |= RATE_RRSR_CCK_ONLY_1M; ++ rtw_write32(Adapter, REG_RRSR, value32); ++ ++ // CF-END Threshold ++ //m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); ++ ++ // SIFS (used in NAV) ++ value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10); ++ rtw_write16(Adapter, REG_SPEC_SIFS, value16); ++ ++ // Retry Limit ++ value16 = _LRL(0x30) | _SRL(0x30); ++ rtw_write16(Adapter, REG_RL, value16); ++ ++} ++ ++static VOID ++_InitRateFallback( ++ IN PADAPTER Adapter ++ ) ++{ ++ // Set Data Auto Rate Fallback Retry Count register. ++ rtw_write32(Adapter, REG_DARFRC, 0x00000000); ++ rtw_write32(Adapter, REG_DARFRC+4, 0x10080404); ++ rtw_write32(Adapter, REG_RARFRC, 0x04030201); ++ rtw_write32(Adapter, REG_RARFRC+4, 0x08070605); ++ ++} ++ ++ ++static VOID ++_InitEDCA( ++ IN PADAPTER Adapter ++ ) ++{ ++ // Set Spec SIFS (used in NAV) ++ rtw_write16(Adapter,REG_SPEC_SIFS, 0x100a); ++ rtw_write16(Adapter,REG_MAC_SPEC_SIFS, 0x100a); ++ ++ //REG514:SIFS_CCK_CTX ++ //REG515:SIFS_OFDM_CTX ++ //REG516:SIFS_CCK_TRX ++ //REG517:SIFS_OFDM_TRX ++ ++ // Set SIFS for CCK_CTS and OFDM_CTX ++ rtw_write16(Adapter,REG_SIFS_CTX, 0x100a); ++ ++ // Set SIFS for CCK_TRX and OFDM_TRX ++ rtw_write16(Adapter,REG_SIFS_TRX, 0x100a); ++ ++ // TXOP ++ rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B); ++ rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F); ++ rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324); ++ rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226); ++} ++ ++ ++static VOID ++_InitBeaconMaxError( ++ IN PADAPTER Adapter, ++ IN BOOLEAN InfraMode ++ ) ++{ ++#ifdef RTL8192CU_ADHOC_WORKAROUND_SETTING ++ rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF); ++#else ++ //rtw_write8(Adapter, REG_BCN_MAX_ERR, (InfraMode ? 0xFF : 0x10)); ++#endif ++} ++ ++ ++#ifdef CONFIG_LED ++static void _InitHWLed(PADAPTER Adapter) ++{ ++ struct led_priv *pledpriv = &(Adapter->ledpriv); ++ ++ if( pledpriv->LedStrategy != HW_LED) ++ return; ++ ++// HW led control ++// to do .... ++//must consider cases of antenna diversity/ commbo card/solo card/mini card ++ ++} ++#endif //CONFIG_LED ++ ++static VOID ++_InitRDGSetting( ++ IN PADAPTER Adapter ++ ) ++{ ++ rtw_write8(Adapter,REG_RD_CTRL,0xFF); ++ rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200); ++ rtw_write8(Adapter,REG_RD_RESP_PKT_TH,0x05); ++} ++ ++static VOID ++_InitRxSetting( ++ IN PADAPTER Adapter ++ ) ++{ ++ rtw_write32(Adapter, REG_MACID, 0x87654321); ++ rtw_write32(Adapter, 0x0700, 0x87654321); ++} ++ ++static VOID ++_InitRetryFunction( ++ IN PADAPTER Adapter ++ ) ++{ ++ u8 value8; ++ ++ value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL); ++ value8 |= EN_AMPDU_RTY_NEW; ++ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8); ++ ++ // Set ACK timeout ++ rtw_write8(Adapter, REG_ACKTO, 0x40); ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: usb_AggSettingTxUpdate() ++ * ++ * Overview: Seperate TX/RX parameters update independent for TP detection and ++ * dynamic TX/RX aggreagtion parameters update. ++ * ++ * Input: PADAPTER ++ * ++ * Output/Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 12/10/2010 MHC Seperate to smaller function. ++ * ++ *---------------------------------------------------------------------------*/ ++static VOID ++usb_AggSettingTxUpdate( ++ IN PADAPTER Adapter ++ ) ++{ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ //PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ u32 value32; ++ ++ if(Adapter->registrypriv.wifi_spec) ++ pHalData->UsbTxAggMode = _FALSE; ++ ++ if(pHalData->UsbTxAggMode){ ++ value32 = rtw_read32(Adapter, REG_TDECTRL); ++ value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT); ++ value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT); ++ ++ rtw_write32(Adapter, REG_TDECTRL, value32); ++ } ++ ++#endif ++} // usb_AggSettingTxUpdate ++ ++ ++/*----------------------------------------------------------------------------- ++ * Function: usb_AggSettingRxUpdate() ++ * ++ * Overview: Seperate TX/RX parameters update independent for TP detection and ++ * dynamic TX/RX aggreagtion parameters update. ++ * ++ * Input: PADAPTER ++ * ++ * Output/Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 12/10/2010 MHC Seperate to smaller function. ++ * ++ *---------------------------------------------------------------------------*/ ++static VOID ++usb_AggSettingRxUpdate( ++ IN PADAPTER Adapter ++ ) ++{ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ //PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ u8 valueDMA; ++ u8 valueUSB; ++ ++ valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL); ++ valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION); ++ ++ switch(pHalData->UsbRxAggMode) ++ { ++ case USB_RX_AGG_DMA: ++ valueDMA |= RXDMA_AGG_EN; ++ valueUSB &= ~USB_AGG_EN; ++ break; ++ case USB_RX_AGG_USB: ++ valueDMA &= ~RXDMA_AGG_EN; ++ valueUSB |= USB_AGG_EN; ++ break; ++ case USB_RX_AGG_MIX: ++ valueDMA |= RXDMA_AGG_EN; ++ valueUSB |= USB_AGG_EN; ++ break; ++ case USB_RX_AGG_DISABLE: ++ default: ++ valueDMA &= ~RXDMA_AGG_EN; ++ valueUSB &= ~USB_AGG_EN; ++ break; ++ } ++ ++ rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA); ++ rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB); ++ ++ switch(pHalData->UsbRxAggMode) ++ { ++ case USB_RX_AGG_DMA: ++ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount); ++ rtw_write8(Adapter, REG_USB_DMA_AGG_TO, pHalData->UsbRxAggPageTimeout); ++ break; ++ case USB_RX_AGG_USB: ++ rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount); ++ rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout); ++ break; ++ case USB_RX_AGG_MIX: ++ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount); ++ rtw_write8(Adapter, REG_USB_DMA_AGG_TO, pHalData->UsbRxAggPageTimeout); ++ rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount); ++ rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout); ++ break; ++ case USB_RX_AGG_DISABLE: ++ default: ++ // TODO: ++ break; ++ } ++ ++ switch(PBP_128) ++ { ++ case PBP_128: ++ pHalData->HwRxPageSize = 128; ++ break; ++ case PBP_64: ++ pHalData->HwRxPageSize = 64; ++ break; ++ case PBP_256: ++ pHalData->HwRxPageSize = 256; ++ break; ++ case PBP_512: ++ pHalData->HwRxPageSize = 512; ++ break; ++ case PBP_1024: ++ pHalData->HwRxPageSize = 1024; ++ break; ++ default: ++ //RT_ASSERT(FALSE, ("RX_PAGE_SIZE_REG_VALUE definition is incorrect!\n")); ++ break; ++ } ++#endif ++} // usb_AggSettingRxUpdate ++ ++static VOID ++InitUsbAggregationSetting( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ // Tx aggregation setting ++ usb_AggSettingTxUpdate(Adapter); ++ ++ // Rx aggregation setting ++ usb_AggSettingRxUpdate(Adapter); ++ ++ // 201/12/10 MH Add for USB agg mode dynamic switch. ++ pHalData->UsbRxHighSpeedMode = _FALSE; ++} ++ ++/*----------------------------------------------------------------------------- ++ * Function: USB_AggModeSwitch() ++ * ++ * Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase ++ * RX speed by increasing batch indication size. This will decrease TCP ACK speed, we ++ * need to monitor the influence of FTP/network share. ++ * For TX mode, we are still ubder investigation. ++ * ++ * Input: PADAPTER ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 12/10/2010 MHC Create Version 0. ++ * ++ *---------------------------------------------------------------------------*/ ++VOID ++USB_AggModeSwitch( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); ++ ++ //pHalData->UsbRxHighSpeedMode = FALSE; ++ // How to measure the RX speed? We assume that when traffic is more than ++ if (pMgntInfo->bRegAggDMEnable == _FALSE) ++ { ++ return; // Inf not support. ++ } ++ ++ ++ if (pmlmepriv->LinkDetectInfo.bHigherBusyTraffic == _TRUE && ++ pHalData->UsbRxHighSpeedMode == _FALSE) ++ { ++ pHalData->UsbRxHighSpeedMode = _TRUE; ++ DBG_8192C("UsbAggModeSwitchCheck to HIGH\n"); ++ } ++ else if (pmlmepriv->LinkDetectInfo.bHigherBusyTraffic == _FALSE && ++ pHalData->UsbRxHighSpeedMode == _TRUE) ++ { ++ pHalData->UsbRxHighSpeedMode = _FALSE; ++ DBG_8192C("UsbAggModeSwitchCheck to LOW\n"); ++ } ++ else ++ { ++ return; ++ } ++ ++ // 2010/12/10 MH Add for USB Aggregation judgement we need to ++ //if( pMgntInfo->LinkDetectInfo.NumRxOkInPeriod > 4000 || ++ // pMgntInfo->LinkDetectInfo.NumTxOkInPeriod > 4000 ) ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ //usb_AggSettingTxUpdate(Adapter); ++#endif ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ if (pHalData->UsbRxHighSpeedMode == _TRUE) ++ { ++ // 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator. ++ // USB mode ++ pHalData->UsbRxAggBlockCount = 40; ++ pHalData->UsbRxAggBlockTimeout = 5; ++ // Mix mode ++ pHalData->UsbRxAggPageCount = 72; ++ pHalData->UsbRxAggPageTimeout = 6; ++ } ++ else ++ { ++ // USB mode ++ pHalData->UsbRxAggBlockCount = pMgntInfo->RegUsbRxAggBlockCount; ++ pHalData->UsbRxAggBlockTimeout = pMgntInfo->RegUsbRxAggBlockTimeout; ++ // Mix mode ++ pHalData->UsbRxAggPageCount = pMgntInfo->RegUsbRxAggPageCount; ++ pHalData->UsbRxAggPageTimeout = pMgntInfo->RegUsbRxAggPageTimeout; ++ } ++#endif ++#endif ++} // USB_AggModeSwitch ++ ++static VOID ++_InitOperationMode( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0//gtest ++ PHAL_DATA_8192CUSB pHalData = GetHalData8192CUsb(Adapter); ++ u1Byte regBwOpMode = 0; ++ u4Byte regRATR = 0, regRRSR = 0; ++ ++ ++ //1 This part need to modified according to the rate set we filtered!! ++ // ++ // Set RRSR, RATR, and REG_BWOPMODE registers ++ // ++ switch(Adapter->RegWirelessMode) ++ { ++ case WIRELESS_MODE_B: ++ regBwOpMode = BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_CCK; ++ regRRSR = RATE_ALL_CCK; ++ break; ++ case WIRELESS_MODE_A: ++ ASSERT(FALSE); ++#if 0 ++ regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_OFDM_AG; ++ regRRSR = RATE_ALL_OFDM_AG; ++#endif ++ break; ++ case WIRELESS_MODE_G: ++ regBwOpMode = BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ break; ++ case WIRELESS_MODE_AUTO: ++ if (Adapter->bInHctTest) ++ { ++ regBwOpMode = BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ } ++ else ++ { ++ regBwOpMode = BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS; ++ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ } ++ break; ++ case WIRELESS_MODE_N_24G: ++ // It support CCK rate by default. ++ // CCK rate will be filtered out only when associated AP does not support it. ++ regBwOpMode = BW_OPMODE_20MHZ; ++ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS; ++ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG; ++ break; ++ case WIRELESS_MODE_N_5G: ++ ASSERT(FALSE); ++#if 0 ++ regBwOpMode = BW_OPMODE_5G; ++ regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS; ++ regRRSR = RATE_ALL_OFDM_AG; ++#endif ++ break; ++ } ++ ++ // Ziv ???????? ++ //PlatformEFIOWrite4Byte(Adapter, REG_INIRTS_RATE_SEL, regRRSR); ++ PlatformEFIOWrite1Byte(Adapter, REG_BWOPMODE, regBwOpMode); ++ ++ // For Min Spacing configuration. ++ switch(pHalData->RF_Type) ++ { ++ case RF_1T2R: ++ case RF_1T1R: ++ RT_TRACE(COMP_INIT, DBG_LOUD, ("Initializeadapter: RF_Type%s\n", (pHalData->RF_Type==RF_1T1R? "(1T1R)":"(1T2R)"))); ++ Adapter->MgntInfo.MinSpaceCfg = (MAX_MSS_DENSITY_1T<<3); ++ break; ++ case RF_2T2R: ++ case RF_2T2R_GREEN: ++ RT_TRACE(COMP_INIT, DBG_LOUD, ("Initializeadapter:RF_Type(2T2R)\n")); ++ Adapter->MgntInfo.MinSpaceCfg = (MAX_MSS_DENSITY_2T<<3); ++ break; ++ } ++ ++ PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MIN_SPACE, Adapter->MgntInfo.MinSpaceCfg); ++#endif ++} ++ ++ ++ static VOID ++_InitBeaconParameters( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ rtw_write16(Adapter, REG_BCN_CTRL, 0x1010); ++ ++ // TODO: Remove these magic number ++ rtw_write16(Adapter, REG_TBTT_PROHIBIT,0x6404);// ms ++ ++ rtw_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);// 5ms ++ rtw_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); // 2ms ++ ++ // Suggested by designer timchen. Change beacon AIFS to the largest number ++ // beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 ++ rtw_write16(Adapter, REG_BCNTCFG, 0x660F); ++} ++ ++static VOID ++_InitRFType( ++ IN PADAPTER Adapter ++ ) ++{ ++ struct registry_priv *pregpriv = &Adapter->registrypriv; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ BOOLEAN is92CU = IS_92C_SERIAL(pHalData->VersionID); ++ ++#if DISABLE_BB_RF ++ pHalData->rf_chip = RF_PSEUDO_11N; ++ return; ++#endif ++ ++ pHalData->rf_chip = RF_6052; ++ ++ if(_FALSE == is92CU){ ++ pHalData->rf_type = RF_1T1R; ++ DBG_8192C("Set RF Chip ID to RF_6052 and RF type to 1T1R.\n"); ++ return; ++ } ++ ++ // TODO: Consider that EEPROM set 92CU to 1T1R later. ++ // Force to overwrite setting according to chip version. Ignore EEPROM setting. ++ //pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R; ++ MSG_8192C("Set RF Chip ID to RF_6052 and RF type to %d.\n", pHalData->rf_type); ++ ++} ++ ++static VOID _InitAdhocWorkaroundParams(IN PADAPTER Adapter) ++{ ++#if RTL8192CU_ADHOC_WORKAROUND_SETTING ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ pHalData->RegBcnCtrlVal = rtw_read8(Adapter, REG_BCN_CTRL); ++ pHalData->RegTxPause = rtw_read8(Adapter, REG_TXPAUSE); ++ pHalData->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL+2); ++ pHalData->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT+2); ++#endif ++} ++ ++static VOID ++_BeaconFunctionEnable( ++ IN PADAPTER Adapter, ++ IN BOOLEAN Enable, ++ IN BOOLEAN Linked ++ ) ++{ ++ rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1)); ++ //SetBcnCtrlReg(Adapter, (BIT4 | BIT3 | BIT1), 0x00); ++ //RT_TRACE(COMP_BEACON, DBG_LOUD, ("_BeaconFunctionEnable 0x550 0x%x\n", PlatformEFIORead1Byte(Adapter, 0x550))); ++ ++ rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F); ++} ++ ++ ++// Set CCK and OFDM Block "ON" ++static VOID _BBTurnOnBlock( ++ IN PADAPTER Adapter ++ ) ++{ ++#if (DISABLE_BB_RF) ++ return; ++#endif ++ ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1); ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1); ++} ++ ++static VOID _RfPowerSave( ++ IN PADAPTER Adapter ++ ) ++{ ++#if 0 ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ u1Byte eRFPath; ++ ++#if (DISABLE_BB_RF) ++ return; ++#endif ++ ++ if(pMgntInfo->RegRfOff == TRUE){ // User disable RF via registry. ++ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RegRfOff.\n")); ++ MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); ++ // Those action will be discard in MgntActSet_RF_State because off the same state ++ for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); ++ } ++ else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS){ // H/W or S/W RF OFF before sleep. ++ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RfOffReason(%ld).\n", pMgntInfo->RfOffReason)); ++ MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); ++ } ++ else{ ++ pHalData->eRFPowerState = eRfOn; ++ pMgntInfo->RfOffReason = 0; ++ if(Adapter->bInSetPower || Adapter->bResetInProgress) ++ PlatformUsbEnableInPipes(Adapter); ++ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): RF is on.\n")); ++ } ++#endif ++} ++ ++enum { ++ Antenna_Lfet = 1, ++ Antenna_Right = 2, ++}; ++ ++static VOID ++_InitAntenna_Selection(IN PADAPTER Adapter) ++{ ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(pHalData->AntDivCfg==0) ++ return; ++ DBG_8192C("==> %s ....\n",__FUNCTION__); ++ ++ if((RF_1T1R == pHalData->rf_type)) ++ { ++ rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT23); ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); ++ ++ if(PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A) ++ pHalData->CurAntenna = Antenna_A; ++ else ++ pHalData->CurAntenna = Antenna_B; ++ DBG_8192C("%s,Cur_ant:(%x)%s\n",__FUNCTION__,pHalData->CurAntenna,(pHalData->CurAntenna == Antenna_A)?"Antenna_A":"Antenna_B"); ++ ++} ++ ++ ++} ++// ++// 2010/08/09 MH Add for power down check. ++// ++static BOOLEAN ++HalDetectPwrDownMode( ++ IN PADAPTER Adapter ++ ) ++{ ++ u8 tmpvalue; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv; ++ ++ EFUSE_ShadowRead(Adapter, 1, EEPROM_RF_OPT3, (u32 *)&tmpvalue); ++ ++ // 2010/08/25 MH INF priority > PDN Efuse value. ++ if(tmpvalue & BIT4 && pwrctrlpriv->reg_pdnmode) ++ { ++ pHalData->pwrdown = _TRUE; ++ } ++ else ++ { ++ pHalData->pwrdown = _FALSE; ++ } ++ ++ DBG_8192C("HalDetectPwrDownMode(): PDN=%d\n", pHalData->pwrdown); ++ return pHalData->pwrdown; ++ ++} // HalDetectPwrDownMode ++ ++ ++// ++// 2010/08/26 MH Add for selective suspend mode check. ++// If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and ++// slim card. ++// ++static VOID ++HalDetectSelectiveSuspendMode( ++ IN PADAPTER Adapter ++ ) ++{ ++ u8 tmpvalue; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter); ++ ++ // If support HW radio detect, we need to enable WOL ability, otherwise, we ++ // can not use FW to notify host the power state switch. ++ ++ EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue); ++ ++ DBG_8192C("HalDetectSelectiveSuspendMode(): SS "); ++ if(tmpvalue & BIT1) ++ { ++ DBG_8192C("Enable\n"); ++ } ++ else ++ { ++ DBG_8192C("Disable\n"); ++ pdvobjpriv->RegUsbSS = _FALSE; ++ } ++ ++ // 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode. ++ if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData)) ++ { ++ //PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); ++ ++ //if (!pMgntInfo->bRegDongleSS) ++ //{ ++ // RT_TRACE(COMP_INIT, DBG_LOUD, ("Dongle disable SS\n")); ++ pdvobjpriv->RegUsbSS = _FALSE; ++ //} ++ } ++} // HalDetectSelectiveSuspendMode ++/*----------------------------------------------------------------------------- ++ * Function: HwSuspendModeEnable92Cu() ++ * ++ * Overview: HW suspend mode switch. ++ * ++ * Input: NONE ++ * ++ * Output: NONE ++ * ++ * Return: NONE ++ * ++ * Revised History: ++ * When Who Remark ++ * 08/23/2010 MHC HW suspend mode switch test.. ++ *---------------------------------------------------------------------------*/ ++static VOID ++HwSuspendModeEnable92Cu( ++ IN PADAPTER pAdapter, ++ IN u8 Type ++ ) ++{ ++ //PRT_USB_DEVICE pDevice = GET_RT_USB_DEVICE(pAdapter); ++ u16 reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG); ++ ++ //if (!pDevice->RegUsbSS) ++ { ++ return; ++ } ++ ++ // ++ // 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW ++ // to enter suspend mode automatically. Otherwise, it will shut down major power ++ // domain and 8051 will stop. When we try to enter selective suspend mode, we ++ // need to prevent HW to enter D2 mode aumotmatically. Another way, Host will ++ // issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli). ++ // We need to enable HW suspend mode when enter S3/S4 or disable. We need ++ // to disable HW suspend mode for IPS/radio_off. ++ // ++ //RT_TRACE(COMP_RF, DBG_LOUD, ("HwSuspendModeEnable92Cu = %d\n", Type)); ++ if (Type == _FALSE) ++ { ++ reg |= BIT14; ++ //RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg)); ++ rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); ++ reg |= BIT12; ++ //RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg)); ++ rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); ++ } ++ else ++ { ++ reg &= (~BIT12); ++ rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); ++ reg &= (~BIT14); ++ rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); ++ } ++ ++} // HwSuspendModeEnable92Cu ++rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u8 val8; ++ rt_rf_power_state rfpowerstate = rf_off; ++ ++ if(pAdapter->pwrctrlpriv.bHWPowerdown) ++ { ++ val8 = rtw_read8(pAdapter, REG_HSISR); ++ DBG_8192C("pwrdown, 0x5c(BIT7)=%02x\n", val8); ++ rfpowerstate = (val8 & BIT7) ? rf_off: rf_on; ++ } ++ else // rf on/off ++ { ++ rtw_write8( pAdapter, REG_MAC_PINMUX_CFG,rtw_read8(pAdapter, REG_MAC_PINMUX_CFG)&~(BIT3)); ++ val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL); ++ DBG_8192C("GPIO_IN=%02x\n", val8); ++ rfpowerstate = (val8 & BIT3) ? rf_on : rf_off; ++ } ++ return rfpowerstate; ++} // HalDetectPwrDownMode ++ ++void _ps_open_RF(_adapter *padapter); ++ ++ ++u32 rtl8192cu_hal_init(PADAPTER Adapter) ++{ ++ u8 val8 = 0; ++ u32 boundary, status = _SUCCESS; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv; ++ struct registry_priv *pregistrypriv = &Adapter->registrypriv; ++ u8 is92C = IS_92C_SERIAL(pHalData->VersionID); ++ rt_rf_power_state eRfPowerStateToSet; ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++#endif ++ ++ u32 init_start_time = rtw_get_current_time(); ++ ++ ++#ifdef DBG_HAL_INIT_PROFILING ++ ++ enum HAL_INIT_STAGES { ++ HAL_INIT_STAGES_BEGIN = 0, ++ HAL_INIT_STAGES_INIT_PW_ON, ++ HAL_INIT_STAGES_MISC01, ++ HAL_INIT_STAGES_DOWNLOAD_FW, ++ HAL_INIT_STAGES_INIT_LLTT, ++ HAL_INIT_STAGES_MAC, ++ HAL_INIT_STAGES_MISC02, ++ HAL_INIT_STAGES_BB, ++ HAL_INIT_STAGES_RF, ++ HAL_INIT_STAGES_TURN_ON_BLOCK, ++ HAL_INIT_STAGES_INIT_SECURITY, ++ HAL_INIT_STAGES_MISC11, ++ //HAL_INIT_STAGES_RF_PS, ++ HAL_INIT_STAGES_IQK, ++ HAL_INIT_STAGES_PW_TRACK, ++ HAL_INIT_STAGES_LCK, ++ HAL_INIT_STAGES_MISC21, ++ HAL_INIT_STAGES_INIT_PABIAS, ++ HAL_INIT_STAGES_BT_COEXIST, ++ //HAL_INIT_STAGES_ANTENNA_SEL, ++ HAL_INIT_STAGES_INIT_HAL_DM, ++ HAL_INIT_STAGES_MISC31, ++ HAL_INIT_STAGES_END, ++ HAL_INIT_STAGES_NUM ++ }; ++ ++ char * hal_init_stages_str[] = { ++ "HAL_INIT_STAGES_BEGIN", ++ "HAL_INIT_STAGES_INIT_PW_ON", ++ "HAL_INIT_STAGES_MISC01", ++ "HAL_INIT_STAGES_DOWNLOAD_FW", ++ "HAL_INIT_STAGES_INIT_LLTT", ++ "HAL_INIT_STAGES_MAC", ++ "HAL_INIT_STAGES_MISC02", ++ "HAL_INIT_STAGES_BB", ++ "HAL_INIT_STAGES_RF", ++ "HAL_INIT_STAGES_TURN_ON_BLOCK", ++ "HAL_INIT_STAGES_INIT_SECURITY", ++ "HAL_INIT_STAGES_MISC11", ++ //"HAL_INIT_STAGES_RF_PS", ++ "HAL_INIT_STAGES_IQK", ++ "HAL_INIT_STAGES_PW_TRACK", ++ "HAL_INIT_STAGES_LCK", ++ "HAL_INIT_STAGES_MISC21", ++ "HAL_INIT_STAGES_INIT_PABIAS", ++ "HAL_INIT_STAGES_BT_COEXIST", ++ //"HAL_INIT_STAGES_ANTENNA_SEL", ++ "HAL_INIT_STAGES_INIT_HAL_DM", ++ "HAL_INIT_STAGES_MISC31", ++ "HAL_INIT_STAGES_END", ++ }; ++ ++ int hal_init_profiling_i; ++ u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; //used to record the time of each stage's starting point ++ ++ for(hal_init_profiling_i=0;hal_init_profiling_ipwrctrlpriv.bkeepfwalive) ++ { ++ _ps_open_RF(Adapter); ++ ++ if(pHalData->bIQKInitialized ){ ++ rtl8192c_PHY_IQCalibrate(Adapter,_TRUE); ++ } ++ else{ ++ rtl8192c_PHY_IQCalibrate(Adapter,_FALSE); ++ pHalData->bIQKInitialized = _TRUE; ++ } ++ rtl8192c_dm_CheckTXPowerTracking(Adapter); ++ rtl8192c_PHY_LCCalibrate(Adapter); ++ ++ goto exit; ++ } ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON); ++ status = _InitPowerOn(Adapter); ++ if(status == _FAIL){ ++ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n")); ++ goto exit; ++ } ++ ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01); ++ _InitQueueReservedPage(Adapter); ++ _InitTxBufferBoundary(Adapter); ++ _InitQueuePriority(Adapter); ++ _InitPageBoundary(Adapter); ++ _InitTransferPageSize(Adapter); ++ ++ ++#if ENABLE_USB_DROP_INCORRECT_OUT ++ _InitHardwareDropIncorrectBulkOut(Adapter); ++#endif ++ ++ if(pHalData->bRDGEnable){ ++ _InitRDGSetting(Adapter); ++ } ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW); ++#if (1 == MP_DRIVER) ++ _InitRxSetting(Adapter); ++ // Don't Download Firmware ++ Adapter->bFWReady = _FALSE; ++#elif RTL8192CU_FW_DOWNLOAD_ENABLE ++ status = FirmwareDownload92C(Adapter,_FALSE); ++ if(status != _SUCCESS) ++ { ++ Adapter->bFWReady = _FALSE; ++ pHalData->fw_ractrl = _FALSE; ++ DBG_8192C("fw download fail!\n"); ++ goto exit; ++ } ++ else ++ { ++ Adapter->bFWReady = _TRUE; ++ pHalData->fw_ractrl = _TRUE; ++ DBG_8192C("fw download ok!\n"); ++ } ++#endif ++ ++ InitializeFirmwareVars92C(Adapter); ++ ++ if(pwrctrlpriv->reg_rfoff == _TRUE){ ++ pwrctrlpriv->rf_pwrstate = rf_off; ++ } ++ ++ // 2010/08/09 MH We need to check if we need to turnon or off RF after detecting ++ // HW GPIO pin. Before PHY_RFConfig8192C. ++ //HalDetectPwrDownMode(Adapter); ++ // 2010/08/26 MH If Efuse does not support sective suspend then disable the function. ++ //HalDetectSelectiveSuspendMode(Adapter); ++ ++ // Set RF type for BB/RF configuration ++ _InitRFType(Adapter);//->_ReadRFType() ++ ++ // Save target channel ++ // Current Channel will be updated again later. ++ pHalData->CurrentChannel = 6;//default set to 6 ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT); ++ if(!pregistrypriv->wifi_spec){ ++ boundary = TX_PAGE_BOUNDARY; ++ } ++ else{// for WMM ++ boundary = WMM_NORMAL_TX_PAGE_BOUNDARY; ++ } ++ status = InitLLTTable(Adapter, boundary); ++ if(status == _FAIL){ ++ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n")); ++ goto exit; ++ } ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC); ++#if (HAL_MAC_ENABLE == 1) ++ status = PHY_MACConfig8192C(Adapter); ++ if(status == _FAIL) ++ { ++ goto exit; ++ } ++#endif ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02); ++ // Get Rx PHY status in order to report RSSI and others. ++ _InitDriverInfoSize(Adapter, DRVINFO_SZ); ++ ++ _InitInterrupt(Adapter); ++ hal_init_macaddr(Adapter);//set mac_address ++ _InitNetworkType(Adapter);//set msr ++ _InitWMACSetting(Adapter); ++ _InitAdaptiveCtrl(Adapter); ++ _InitEDCA(Adapter); ++ _InitRateFallback(Adapter); ++ _InitRetryFunction(Adapter); ++ InitUsbAggregationSetting(Adapter); ++ _InitOperationMode(Adapter);//todo ++ _InitBeaconParameters(Adapter); ++ _InitBeaconMaxError(Adapter, _TRUE); ++ ++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI) ++ ++#ifdef CONFIG_CHECK_AC_LIFETIME ++ // Enable lifetime check for the four ACs ++ rtw_write8(Adapter, REG_LIFETIME_EN, 0x0F); ++#endif // CONFIG_CHECK_AC_LIFETIME ++ ++#ifdef CONFIG_TX_MCAST2UNI ++ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); // unit: 256us. 256ms ++ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); // unit: 256us. 256ms ++#else // CONFIG_TX_MCAST2UNI ++ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); // unit: 256us. 3s ++ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); // unit: 256us. 3s ++#endif // CONFIG_TX_MCAST2UNI ++#endif // CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI ++ ++ ++#ifdef CONFIG_LED ++ _InitHWLed(Adapter); ++#endif //CONFIG_LED ++ ++ // ++ //d. Initialize BB related configurations. ++ // ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB); ++#if (HAL_BB_ENABLE == 1) ++ status = PHY_BBConfig8192C(Adapter); ++ if(status == _FAIL) ++ { ++ goto exit; ++ } ++#endif ++ ++ // 92CU use 3-wire to r/w RF ++ //pHalData->Rf_Mode = RF_OP_By_SW_3wire; ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF); ++#if (HAL_RF_ENABLE == 1) ++ status = PHY_RFConfig8192C(Adapter); ++ if(status == _FAIL) ++ { ++ goto exit; ++ } ++ ++ if(IS_VENDOR_UMC_A_CUT(pHalData->VersionID) && !IS_92C_SERIAL(pHalData->VersionID)) ++ { ++ PHY_SetRFReg(Adapter, RF_PATH_A, RF_RX_G1, bMaskDWord, 0x30255); ++ PHY_SetRFReg(Adapter, RF_PATH_A, RF_RX_G2, bMaskDWord, 0x50a00); ++ } ++#endif ++ ++ // ++ // Joseph Note: Keep RfRegChnlVal for later use. ++ // ++ pHalData->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)0, RF_CHNLBW, bRFRegOffsetMask); ++ pHalData->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)1, RF_CHNLBW, bRFRegOffsetMask); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK); ++ _BBTurnOnBlock(Adapter); ++ //NicIFSetMacAddress(padapter, padapter->PermanentAddress); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY); ++ invalidate_cam_all(Adapter); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11); ++ // 2010/12/17 MH We need to set TX power according to EFUSE content at first. ++ PHY_SetTxPowerLevel8192C(Adapter, pHalData->CurrentChannel); ++ ++// Move by Neo for USB SS to below setp ++//_RfPowerSave(Adapter); ++ ++ if (!IS_92C_SERIAL( pHalData->VersionID) && (pHalData->AntDivCfg!=0)) ++ { //for 88CU ,1T1R ++ _InitAntenna_Selection(Adapter); ++ } ++ ++ ++ // ++ // Disable BAR, suggested by Scott ++ // 2010.04.09 add by hpfan ++ // ++ rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff); ++ ++ // HW SEQ CTRL ++ //set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. ++ rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF); ++ ++ if(pregistrypriv->wifi_spec) ++ rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0); ++ ++ //Nav limit , suggest by scott ++ rtw_write8(Adapter, 0x652, 0x0); ++ ++#if (MP_DRIVER == 1) ++ Adapter->mppriv.channel = pHalData->CurrentChannel; ++ MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel); ++#else ++ // ++ // 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status ++ // and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not ++ // call init_adapter. May cause some problem?? ++ // ++ // Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed ++ // in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState ++ // is the same as eRfOff, we should change it to eRfOn after we config RF parameters. ++ // Added by tynli. 2010.03.30. ++ pwrctrlpriv->rf_pwrstate = rf_on; ++ ++#if 0 //to do ++ RT_CLEAR_PS_LEVEL(pwrctrlpriv, RT_RF_OFF_LEVL_HALT_NIC); ++#if 1 //Todo ++ // 20100326 Joseph: Copy from GPIOChangeRFWorkItemCallBack() function to check HW radio on/off. ++ // 20100329 Joseph: Revise and integrate the HW/SW radio off code in initialization. ++ ++ eRfPowerStateToSet = (rt_rf_power_state) RfOnOffDetect(Adapter); ++ pwrctrlpriv->rfoff_reason |= eRfPowerStateToSet==rf_on ? RF_CHANGE_BY_INIT : RF_CHANGE_BY_HW; ++ pwrctrlpriv->rfoff_reason |= (pwrctrlpriv->reg_rfoff) ? RF_CHANGE_BY_SW : 0; ++ ++ if(pwrctrlpriv->rfoff_reason&RF_CHANGE_BY_HW) ++ pwrctrlpriv->b_hw_radio_off = _TRUE; ++ ++ DBG_8192C("eRfPowerStateToSet=%d\n", eRfPowerStateToSet); ++ ++ if(pwrctrlpriv->reg_rfoff == _TRUE) ++ { // User disable RF via registry. ++ DBG_8192C("InitializeAdapter8192CU(): Turn off RF for RegRfOff.\n"); ++ //MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_SW, _TRUE); ++ ++ // Those action will be discard in MgntActSet_RF_State because off the same state ++ //for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) ++ //PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); ++ } ++ else if(pwrctrlpriv->rfoff_reason > RF_CHANGE_BY_PS) ++ { // H/W or S/W RF OFF before sleep. ++ DBG_8192C(" Turn off RF for RfOffReason(%x) ----------\n", pwrctrlpriv->rfoff_reason); ++ //pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; ++ pwrctrlpriv->rf_pwrstate = rf_on; ++ //MgntActSet_RF_State(Adapter, rf_off, pwrctrlpriv->rfoff_reason, _TRUE); ++ } ++ else ++ { ++ // Perform GPIO polling to find out current RF state. added by Roger, 2010.04.09. ++ if(pHalData->BoardType == BOARD_MINICARD /*&& (Adapter->MgntInfo.PowerSaveControl.bGpioRfSw)*/) ++ { ++ DBG_8192C("InitializeAdapter8192CU(): RF=%d \n", eRfPowerStateToSet); ++ if (eRfPowerStateToSet == rf_off) ++ { ++ //MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_HW, _TRUE); ++ pwrctrlpriv->b_hw_radio_off = _TRUE; ++ } ++ else ++ { ++ pwrctrlpriv->rf_pwrstate = rf_off; ++ pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; ++ pwrctrlpriv->b_hw_radio_off = _FALSE; ++ //MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE); ++ } ++ } ++ else ++ { ++ pwrctrlpriv->rf_pwrstate = rf_off; ++ pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; ++ //MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE); ++ } ++ ++ pwrctrlpriv->rfoff_reason = 0; ++ pwrctrlpriv->b_hw_radio_off = _FALSE; ++ pwrctrlpriv->rf_pwrstate = rf_on; ++ rtw_led_control(Adapter, LED_CTL_POWER_ON); ++ ++ } ++ ++ // 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. ++ // Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. ++ if(pHalData->pwrdown && eRfPowerStateToSet == rf_off) ++ { ++ // Enable register area 0x0-0xc. ++ rtw_write8(Adapter, REG_RSV_CTRL, 0x0); ++ ++ // ++ // We should configure HW PDn source for WiFi ONLY, and then ++ // our HW will be set in power-down mode if PDn source from all functions are configured. ++ // 2010.10.06. ++ // ++ //if(IS_HARDWARE_TYPE_8723AU(Adapter)) ++ //{ ++ // u1bTmp = rtw_read8(Adapter, REG_MULTI_FUNC_CTRL); ++ // rtw_write8(Adapter, REG_MULTI_FUNC_CTRL, (u1bTmp|WL_HWPDN_EN)); ++ //} ++ //else ++ //{ ++ rtw_write16(Adapter, REG_APS_FSMCO, 0x8812); ++ //} ++ } ++ //DrvIFIndicateCurrentPhyStatus(Adapter); // 2010/08/17 MH Disable to prevent BSOD. ++#endif ++#endif ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK); ++ // 2010/08/26 MH Merge from 8192CE. ++ if(pwrctrlpriv->rf_pwrstate == rf_on) ++ { ++ if(pHalData->bIQKInitialized ){ ++ rtl8192c_PHY_IQCalibrate(Adapter,_TRUE); ++ } ++ else ++ { ++ rtl8192c_PHY_IQCalibrate(Adapter,_FALSE); ++ pHalData->bIQKInitialized = _TRUE; ++ } ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK); ++ rtl8192c_dm_CheckTXPowerTracking(Adapter); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK); ++ rtl8192c_PHY_LCCalibrate(Adapter); ++ } ++#endif /* #if (MP_DRIVER == 1) */ ++ ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21); ++#if RTL8192CU_ADHOC_WORKAROUND_SETTING ++ _InitAdhocWorkaroundParams(Adapter); ++#endif ++ ++ ++#ifdef USB_INTERFERENCE_ISSUE ++ //fixed USB interface interference issue ++ rtw_write8(Adapter, 0xfe40, 0xe0); ++ rtw_write8(Adapter, 0xfe41, 0x8d); ++ rtw_write8(Adapter, 0xfe42, 0x80); ++ rtw_write32(Adapter,0x20c,0xfd0320); ++#if 1 ++ //2011/01/07 ,suggest by Johnny,for solved the problem that too many protocol error on USB bus ++ if(!IS_VENDOR_UMC_A_CUT(pHalData->VersionID) )//&& !IS_92C_SERIAL(pHalData->VersionID))// TSMC , 8188 ++ { ++ // 0xE6=0x94 ++ rtw_write8(Adapter, 0xFE40, 0xE6); ++ rtw_write8(Adapter, 0xFE41, 0x94); ++ rtw_write8(Adapter, 0xFE42, 0x80); ++ ++ // 0xE0=0x19 ++ rtw_write8(Adapter, 0xFE40, 0xE0); ++ rtw_write8(Adapter, 0xFE41, 0x19); ++ rtw_write8(Adapter, 0xFE42, 0x80); ++ ++ // 0xE5=0x91 ++ rtw_write8(Adapter, 0xFE40, 0xE5); ++ rtw_write8(Adapter, 0xFE41, 0x91); ++ rtw_write8(Adapter, 0xFE42, 0x80); ++ ++ // 0xE2=0x81 ++ rtw_write8(Adapter, 0xFE40, 0xE2); ++ rtw_write8(Adapter, 0xFE41, 0x81); ++ rtw_write8(Adapter, 0xFE42, 0x80); ++ ++ } ++ ++#endif ++#endif //USB_INTERFERENCE_ISSUE ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); ++ _InitPABias(Adapter); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST); ++#ifdef CONFIG_BT_COEXIST ++ _InitBTCoexist(Adapter); ++#endif ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM); ++ rtl8192c_InitHalDm(Adapter); ++ ++ // 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter ++ // suspend mode automatically. ++ //HwSuspendModeEnable92Cu(Adapter, _FALSE); ++ ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31); ++ rtw_write8(Adapter, 0x15, 0xe9);//suggest by Johnny for lower temperature ++ ++ rtw_write8(Adapter, 0xc87, 0x50);//suggest by Jackson for CCA ++ ++ //_dbg_dump_macreg(padapter); ++ ++ rtw_write16(Adapter, REG_BCN_CTRL, 0x1818); // For 2 PORT TSF SYNC ++ ++ ++ ++#ifdef CONFIG_XMIT_ACK ++ //ack for xmit mgmt frames. ++ rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12)); ++#endif //CONFIG_XMIT_ACK ++ ++exit: ++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END); ++ ++ DBG_871X("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time)); ++ ++ #ifdef DBG_HAL_INIT_PROFILING ++ hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time(); ++ ++ for(hal_init_profiling_i=0;hal_init_profiling_irf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 1); ++ else ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 1); ++ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1); ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0); ++ ++ //AFE ++ //DbgPrint("0x0e70 = %x\n", Adapter->PS_BBRegBackup[PSBBREG_AFE0]); ++ //PHY_SetBBReg(Adapter, 0x0e70, bMaskDWord ,Adapter->PS_BBRegBackup[PSBBREG_AFE0] ); ++ //PHY_SetBBReg(Adapter, 0x0e70, bMaskDWord ,0x631B25A0 ); ++ if (pHalData->rf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x63DB25A0 ); ++ else if (pHalData->rf_type == RF_1T1R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x631B25A0 ); ++ ++ // 4. issue 3-wire command that RF set to Rx idle mode. This is used to re-write the RX idle mode. ++ // We can only prvide a usual value instead and then HW will modify the value by itself. ++ PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0x32D95); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0x32D95); ++ } ++ } ++ else // Level 2 or others. ++ { ++ //h. AFE_PLL_CTRL 0x28[7:0] = 0x80 //disable AFE PLL ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x81); ++ ++ // i. AFE_XTAL_CTRL 0x24[15:0] = 0x880F //gated AFE DIG_CLOCK ++ rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0x800F); ++ rtw_mdelay_os(1); ++ ++ // 1. Enable MAC Clock. Can not be enabled now. ++ //WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) | BIT(3)); ++ ++ // 2. Force PWM, Enable SPS18_LDO_Marco_Block ++ rtw_write8(Adapter, REG_SPS0_CTRL, ++ rtw_read8(Adapter, REG_SPS0_CTRL) | (BIT0|BIT3)); ++ ++ // 3. restore BB, AFE control register. ++ //RF ++ if (pHalData->rf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 1); ++ else ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 1); ++ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1); ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0); ++ ++ //AFE ++ if (pHalData->rf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x63DB25A0 ); ++ else if (pHalData->rf_type == RF_1T1R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x631B25A0 ); ++ ++ // 4. issue 3-wire command that RF set to Rx idle mode. This is used to re-write the RX idle mode. ++ // We can only prvide a usual value instead and then HW will modify the value by itself. ++ PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0x32D95); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0x32D95); ++ } ++ ++ // 5. gated MAC Clock ++ //WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3))); ++ //PlatformEFIOWrite1Byte(Adapter, REG_SYS_CLKR+1, PlatformEFIORead1Byte(Adapter, REG_SYS_CLKR+1)|(BIT3)); ++ ++ { ++ //u8 eRFPath = RF_PATH_A,value8 = 0, retry = 0; ++ u8 bytetmp; ++ //PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0); ++ // 2010/08/12 MH Add for B path under SS test. ++ //if (pHalData->RF_Type == RF_2T2R) ++ //PHY_SetRFReg(Adapter, RF_PATH_B, 0x0, bMaskByte0, 0x0); ++ ++ bytetmp = rtw_read8(Adapter, REG_APSD_CTRL); ++ rtw_write8(Adapter, REG_APSD_CTRL, bytetmp & ~BIT6); ++ ++ rtw_mdelay_os(10); ++ ++ // Set BB reset at first ++ rtw_write8(Adapter, REG_SYS_FUNC_EN, 0x17 );//0x16 ++ //undo clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31)); ++ // Enable TX ++ rtw_write8(Adapter, REG_TXPAUSE, 0x0); ++ } ++ //Adapter->HalFunc.InitializeAdapterHandler(Adapter, Adapter->MgntInfo.dot11CurrentChannelNumber); ++ //CardSelectiveSuspendLeave(Adapter); ++ } ++ ++ break; ++ ++ case rf_sleep: ++ case rf_off: ++ value8 = rtw_read8(Adapter, REG_SPS0_CTRL) ; ++ if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)) ++ value8 &= ~(BIT0); ++ else ++ value8 &= ~(BIT0|BIT3); ++ if (bRegSSPwrLvl == 1) ++ { ++ //RT_TRACE(COMP_POWER, DBG_LOUD, ("SS LVL1\n")); ++ // Disable RF and BB only for SelectSuspend. ++ ++ // 1. Set BB/RF to shutdown. ++ // (1) Reg878[5:3]= 0 // RF rx_code for preamble power saving ++ // (2)Reg878[21:19]= 0 //Turn off RF-B ++ // (3) RegC04[7:4]= 0 // turn off all paths for packet detection ++ // (4) Reg800[1] = 1 // enable preamble power saving ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] = PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter, bMaskDWord); ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] = PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskDWord); ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] = PHY_QueryBBReg(Adapter, rFPGA0_RFMOD, bMaskDWord); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 0); ++ } ++ else if (pHalData->rf_type == RF_1T1R) ++ { ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0); ++ } ++ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0); ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1,1); ++ ++ // 2 .AFE control register to power down. bit[30:22] ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] = PHY_QueryBBReg(Adapter, rRx_Wait_CCA, bMaskDWord); ++ if (pHalData->rf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x00DB25A0); ++ else if (pHalData->rf_type == RF_1T1R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x001B25A0); ++ ++ // 3. issue 3-wire command that RF set to power down. ++ PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0); ++ } ++ ++ // 4. Force PFM , disable SPS18_LDO_Marco_Block ++ rtw_write8(Adapter, REG_SPS0_CTRL, value8); ++ ++ // 5. gated MAC Clock ++ //WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3))); ++ } ++ else // Level 2 or others. ++ { ++ //RT_TRACE(COMP_POWER, DBG_LOUD, ("SS LVL2\n")); ++ { ++ u8 eRFPath = RF_PATH_A,value8 = 0; ++ rtw_write8(Adapter, REG_TXPAUSE, 0xFF); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0); ++ // 2010/08/12 MH Add for B path under SS test. ++ //if (pHalData->RF_Type == RF_2T2R) ++ //PHY_SetRFReg(Adapter, RF_PATH_B, 0x0, bMaskByte0, 0x0); ++ ++ value8 |= APSDOFF; ++ rtw_write8(Adapter, REG_APSD_CTRL, value8);//0x40 ++ ++ // After switch APSD, we need to delay for stability ++ rtw_mdelay_os(10); ++ //before BB reset should do clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31)); ++ // Set BB reset at first ++ value8 = 0 ; ++ value8 |=( FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN,value8 );//0x16 ++ } ++ ++ // Disable RF and BB only for SelectSuspend. ++ ++ // 1. Set BB/RF to shutdown. ++ // (1) Reg878[5:3]= 0 // RF rx_code for preamble power saving ++ // (2)Reg878[21:19]= 0 //Turn off RF-B ++ // (3) RegC04[7:4]= 0 // turn off all paths for packet detection ++ // (4) Reg800[1] = 1 // enable preamble power saving ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] = PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter, bMaskDWord); ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] = PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskDWord); ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] = PHY_QueryBBReg(Adapter, rFPGA0_RFMOD, bMaskDWord); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 0); ++ } ++ else if (pHalData->rf_type == RF_1T1R) ++ { ++ PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0); ++ } ++ PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0); ++ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1,1); ++ ++ // 2 .AFE control register to power down. bit[30:22] ++ Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] = PHY_QueryBBReg(Adapter, rRx_Wait_CCA, bMaskDWord); ++ if (pHalData->rf_type == RF_2T2R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x00DB25A0); ++ else if (pHalData->rf_type == RF_1T1R) ++ PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x001B25A0); ++ ++ // 3. issue 3-wire command that RF set to power down. ++ PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0); ++ if (pHalData->rf_type == RF_2T2R) ++ { ++ PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0); ++ } ++ ++ // 4. Force PFM , disable SPS18_LDO_Marco_Block ++ rtw_write8(Adapter, REG_SPS0_CTRL, value8); ++ ++ // 2010/10/13 MH/Isaachsu exchange sequence. ++ //h. AFE_PLL_CTRL 0x28[7:0] = 0x80 //disable AFE PLL ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x80); ++ rtw_mdelay_os(1); ++ ++ // i. AFE_XTAL_CTRL 0x24[15:0] = 0x880F //gated AFE DIG_CLOCK ++ rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0xA80F); ++ ++ // 5. gated MAC Clock ++ //WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3))); ++ //PlatformEFIOWrite1Byte(Adapter, REG_SYS_CLKR+1, PlatformEFIORead1Byte(Adapter, REG_SYS_CLKR+1)& ~(BIT3)) ++ ++ //CardSelectiveSuspendEnter(Adapter); ++ } ++ ++ break; ++ ++ default: ++ break; ++ } ++ ++} // phy_PowerSwitch92CU ++ ++void _ps_open_RF(_adapter *padapter) { ++ //here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified ++ phy_SsPwrSwitch92CU(padapter, rf_on, 1); ++} ++ ++void _ps_close_RF(_adapter *padapter){ ++ //here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified ++ phy_SsPwrSwitch92CU(padapter, rf_off, 1); ++} ++#endif //SYNC_SD7_20110802_phy_SsPwrSwitch92CU ++ ++ ++ ++static VOID ++_DisableGPIO( ++ IN PADAPTER Adapter ++ ) ++{ ++/*************************************** ++j. GPIO_PIN_CTRL 0x44[31:0]=0x000 // ++k. Value = GPIO_PIN_CTRL[7:0] ++l. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); //write external PIN level ++m. GPIO_MUXCFG 0x42 [15:0] = 0x0780 ++n. LEDCFG 0x4C[15:0] = 0x8080 ++***************************************/ ++ u8 value8; ++ u16 value16; ++ u32 value32; ++ ++ //1. Disable GPIO[7:0] ++ rtw_write16(Adapter, REG_GPIO_PIN_CTRL+2, 0x0000); ++ value32 = rtw_read32(Adapter, REG_GPIO_PIN_CTRL) & 0xFFFF00FF; ++ value8 = (u8) (value32&0x000000FF); ++ value32 |= ((value8<<8) | 0x00FF0000); ++ rtw_write32(Adapter, REG_GPIO_PIN_CTRL, value32); ++ ++ //2. Disable GPIO[10:8] ++ rtw_write8(Adapter, REG_GPIO_MUXCFG+3, 0x00); ++ value16 = rtw_read16(Adapter, REG_GPIO_MUXCFG+2) & 0xFF0F; ++ value8 = (u8) (value16&0x000F); ++ value16 |= ((value8<<4) | 0x0780); ++ rtw_write16(Adapter, REG_GPIO_MUXCFG+2, value16); ++ ++ //3. Disable LED0 & 1 ++ rtw_write16(Adapter, REG_LEDCFG0, 0x8080); ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Disable GPIO and LED.\n")); ++ ++} //end of _DisableGPIO() ++ ++static VOID ++_ResetFWDownloadRegister( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ ++ value32 = rtw_read32(Adapter, REG_MCUFWDL); ++ value32 &= ~(MCUFWDL_EN | MCUFWDL_RDY); ++ rtw_write32(Adapter, REG_MCUFWDL, value32); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset FW download register.\n")); ++} ++ ++ ++static int ++_DisableRF_AFE( ++ IN PADAPTER Adapter ++ ) ++{ ++ int rtStatus = _SUCCESS; ++ u32 pollingCount = 0; ++ u8 value8; ++ ++ //disable RF/ AFE AD/DA ++ value8 = APSDOFF; ++ rtw_write8(Adapter, REG_APSD_CTRL, value8); ++ ++ ++#if (RTL8192CU_ASIC_VERIFICATION) ++ ++ do ++ { ++ if(rtw_read8(Adapter, REG_APSD_CTRL) & APSDOFF_STATUS){ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable RF, AFE, AD, DA Done!\n")); ++ break; ++ } ++ ++ if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){ ++ //RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Failed to polling APSDOFF_STATUS done!\n")); ++ return _FAIL; ++ } ++ ++ }while(_TRUE); ++ ++#endif ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable RF, AFE,AD, DA.\n")); ++ return rtStatus; ++ ++} ++ ++static VOID ++_ResetBB( ++ IN PADAPTER Adapter ++ ) ++{ ++ u16 value16; ++ ++ //before BB reset should do clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31)); ++ //reset BB ++ value16 = rtw_read16(Adapter, REG_SYS_FUNC_EN); ++ value16 &= ~(FEN_BBRSTB | FEN_BB_GLB_RSTn); ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, value16); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset BB.\n")); ++} ++ ++static VOID ++_ResetMCU( ++ IN PADAPTER Adapter ++ ) ++{ ++ u16 value16; ++ ++ // reset MCU ++ value16 = rtw_read16(Adapter, REG_SYS_FUNC_EN); ++ value16 &= ~FEN_CPUEN; ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, value16); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset MCU.\n")); ++} ++ ++static VOID ++_DisableMAC_AFE_PLL( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ ++ //disable MAC/ AFE PLL ++ value32 = rtw_read32(Adapter, REG_APS_FSMCO); ++ value32 |= APDM_MAC; ++ rtw_write32(Adapter, REG_APS_FSMCO, value32); ++ ++ value32 |= APFM_OFF; ++ rtw_write32(Adapter, REG_APS_FSMCO, value32); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable MAC, AFE PLL.\n")); ++} ++ ++static VOID ++_AutoPowerDownToHostOff( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ rtw_write8(Adapter, REG_SPS0_CTRL, 0x22); ++ ++ value32 = rtw_read32(Adapter, REG_APS_FSMCO); ++ ++ value32 |= APDM_HOST;//card disable ++ rtw_write32(Adapter, REG_APS_FSMCO, value32); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Auto Power Down to Host-off state.\n")); ++ ++ // set USB suspend ++ value32 = rtw_read32(Adapter, REG_APS_FSMCO); ++ value32 &= ~AFSM_PCIE; ++ rtw_write32(Adapter, REG_APS_FSMCO, value32); ++ ++} ++ ++static VOID ++_SetUsbSuspend( ++ IN PADAPTER Adapter ++ ) ++{ ++ u32 value32; ++ ++ value32 = rtw_read32(Adapter, REG_APS_FSMCO); ++ ++ // set USB suspend ++ value32 |= AFSM_HSUS; ++ rtw_write32(Adapter, REG_APS_FSMCO, value32); ++ ++ //RT_ASSERT(0 == (rtw_read32(Adapter, REG_APS_FSMCO) & BIT(12)),("")); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("Set USB suspend.\n")); ++ ++} ++ ++static VOID ++_DisableRFAFEAndResetBB( ++ IN PADAPTER Adapter ++ ) ++{ ++/************************************** ++a. TXPAUSE 0x522[7:0] = 0xFF //Pause MAC TX queue ++b. RF path 0 offset 0x00 = 0x00 // disable RF ++c. APSD_CTRL 0x600[7:0] = 0x40 ++d. SYS_FUNC_EN 0x02[7:0] = 0x16 //reset BB state machine ++e. SYS_FUNC_EN 0x02[7:0] = 0x14 //reset BB state machine ++***************************************/ ++ u8 eRFPath = 0,value8 = 0; ++ rtw_write8(Adapter, REG_TXPAUSE, 0xFF); ++ PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0); ++ ++ value8 |= APSDOFF; ++ rtw_write8(Adapter, REG_APSD_CTRL, value8);//0x40 ++ //before BB reset should do clock gated ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31)); ++ value8 = 0 ; ++ value8 |=( FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN,value8 );//0x16 ++ ++ value8 &=( ~FEN_BB_GLB_RSTn ); ++ rtw_write8(Adapter, REG_SYS_FUNC_EN, value8); //0x14 ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("======> RF off and reset BB.\n")); ++} ++ ++static VOID ++_ResetDigitalProcedure1( ++ IN PADAPTER Adapter, ++ IN BOOLEAN bWithoutHWSM ++ ) ++{ ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(pHalData->FirmwareVersion <= 0x20){ ++ #if 0 ++ /***************************** ++ f. SYS_FUNC_EN 0x03[7:0]=0x54 // reset MAC register, DCORE ++ g. MCUFWDL 0x80[7:0]=0 // reset MCU ready status ++ ******************************/ ++ u4Byte value32 = 0; ++ PlatformIOWrite1Byte(Adapter, REG_SYS_FUNC_EN+1, 0x54); ++ PlatformIOWrite1Byte(Adapter, REG_MCUFWDL, 0); ++ #else ++ /***************************** ++ f. MCUFWDL 0x80[7:0]=0 // reset MCU ready status ++ g. SYS_FUNC_EN 0x02[10]= 0 // reset MCU register, (8051 reset) ++ h. SYS_FUNC_EN 0x02[15-12]= 5 // reset MAC register, DCORE ++ i. SYS_FUNC_EN 0x02[10]= 1 // enable MCU register, (8051 enable) ++ ******************************/ ++ u16 valu16 = 0; ++ rtw_write8(Adapter, REG_MCUFWDL, 0); ++ ++ valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN); ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 & (~FEN_CPUEN)));//reset MCU ,8051 ++ ++ valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN)&0x0FFF; ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 |(FEN_HWPDN|FEN_ELDR)));//reset MAC ++ ++ #ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE ++ { ++ u8 val; ++ if( (val=rtw_read8(Adapter, REG_MCUFWDL))) ++ DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val); ++ } ++ #endif ++ ++ ++ valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN); ++ rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 | FEN_CPUEN));//enable MCU ,8051 ++ ++ ++ #endif ++ } ++ else{ ++ u8 retry_cnts = 0; ++ ++ if(rtw_read8(Adapter, REG_MCUFWDL) & BIT1) ++ { //IF fw in RAM code, do reset ++ ++ rtw_write8(Adapter, REG_MCUFWDL, 0); ++ if(Adapter->bFWReady){ ++ // 2010/08/25 MH Accordign to RD alfred's suggestion, we need to disable other ++ // HRCV INT to influence 8051 reset. ++ rtw_write8(Adapter, REG_FWIMR, 0x20); ++ ++ rtw_write8(Adapter, REG_HMETFR+3, 0x20);//8051 reset by self ++ ++ while( (retry_cnts++ <100) && (FEN_CPUEN &rtw_read16(Adapter, REG_SYS_FUNC_EN))) ++ { ++ rtw_udelay_os(50);//PlatformStallExecution(50);//us ++ } ++ ++ if(retry_cnts >= 100){ ++ DBG_8192C("%s #####=> 8051 reset failed!.........................\n", __FUNCTION__); ++ // if 8051 reset fail we trigger GPIO 0 for LA ++ //PlatformEFIOWrite4Byte( Adapter, ++ // REG_GPIO_PIN_CTRL, ++ // 0x00010100); ++ // 2010/08/31 MH According to Filen's info, if 8051 reset fail, reset MAC directly. ++ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x50); //Reset MAC and Enable 8051 ++ rtw_mdelay_os(10); ++ } ++ else { ++ //DBG_871X("%s =====> 8051 reset success (%d) .\n", __FUNCTION__, retry_cnts); ++ } ++ } ++ else { ++ DBG_871X("%s =====> 8051 in RAM but !Adapter->bFWReady\n", __FUNCTION__); ++ } ++ } ++ else{ ++ //DBG_871X("%s =====> 8051 in ROM.\n", __FUNCTION__); ++ } ++ ++ #ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE ++ { ++ u8 val; ++ if( (val=rtw_read8(Adapter, REG_MCUFWDL))) ++ DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val); ++ } ++ #endif ++ ++ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x54); //Reset MAC and Enable 8051 ++ } ++ ++ // Clear rpwm value for initial toggle bit trigger. ++ rtw_write8(Adapter, REG_USB_HRPWM, 0x00); ++ ++ if(bWithoutHWSM){ ++ /***************************** ++ Without HW auto state machine ++ g. SYS_CLKR 0x08[15:0] = 0x30A3 //disable MAC clock ++ h. AFE_PLL_CTRL 0x28[7:0] = 0x80 //disable AFE PLL ++ i. AFE_XTAL_CTRL 0x24[15:0] = 0x880F //gated AFE DIG_CLOCK ++ j. SYS_ISO_CTRL 0x00[7:0] = 0xF9 // isolated digital to PON ++ ******************************/ ++ //rtw_write16(Adapter, REG_SYS_CLKR, 0x30A3); ++ rtw_write16(Adapter, REG_SYS_CLKR, 0x70A3);//modify to 0x70A3 by Scott. ++ rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x80); ++ rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0x880F); ++ rtw_write8(Adapter, REG_SYS_ISO_CTRL, 0xF9); ++ } ++ else ++ { ++ // Disable all RF/BB power ++ rtw_write8(Adapter, REG_RF_CTRL, 0x00); ++ } ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Reset Digital.\n")); ++ ++} ++ ++static VOID ++_ResetDigitalProcedure2( ++ IN PADAPTER Adapter ++) ++{ ++/***************************** ++k. SYS_FUNC_EN 0x03[7:0] = 0x44 // disable ELDR runction ++l. SYS_CLKR 0x08[15:0] = 0x3083 // disable ELDR clock ++m. SYS_ISO_CTRL 0x01[7:0] = 0x83 // isolated ELDR to PON ++******************************/ ++ //rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x44);//marked by Scott. ++ //rtw_write16(Adapter, REG_SYS_CLKR, 0x3083); ++ //rtw_write8(Adapter, REG_SYS_ISO_CTRL+1, 0x83); ++ ++ rtw_write16(Adapter, REG_SYS_CLKR, 0x70a3); //modify to 0x70a3 by Scott. ++ rtw_write8(Adapter, REG_SYS_ISO_CTRL+1, 0x82); //modify to 0x82 by Scott. ++} ++ ++static VOID ++_DisableAnalog( ++ IN PADAPTER Adapter, ++ IN BOOLEAN bWithoutHWSM ++ ) ++{ ++ u16 value16 = 0; ++ u8 value8=0; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(bWithoutHWSM){ ++ /***************************** ++ n. LDOA15_CTRL 0x20[7:0] = 0x04 // disable A15 power ++ o. LDOV12D_CTRL 0x21[7:0] = 0x54 // disable digital core power ++ r. When driver call disable, the ASIC will turn off remaining clock automatically ++ ******************************/ ++ ++ rtw_write8(Adapter, REG_LDOA15_CTRL, 0x04); ++ //PlatformIOWrite1Byte(Adapter, REG_LDOV12D_CTRL, 0x54); ++ ++ value8 = rtw_read8(Adapter, REG_LDOV12D_CTRL); ++ value8 &= (~LDV12_EN); ++ rtw_write8(Adapter, REG_LDOV12D_CTRL, value8); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, (" REG_LDOV12D_CTRL Reg0x21:0x%02x.\n",value8)); ++ } ++ ++/***************************** ++h. SPS0_CTRL 0x11[7:0] = 0x23 //enter PFM mode ++i. APS_FSMCO 0x04[15:0] = 0x4802 // set USB suspend ++******************************/ ++ ++ ++ value8 = 0x23; ++ if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)) ++ value8 |= BIT3; ++ ++ rtw_write8(Adapter, REG_SPS0_CTRL, value8); ++ ++ ++ if(bWithoutHWSM) ++ { ++ //value16 |= (APDM_HOST | /*AFSM_HSUS |*/PFM_ALDN); ++ // 2010/08/31 According to Filen description, we need to use HW to shut down 8051 automatically. ++ // Becasue suspend operatione need the asistance of 8051 to wait for 3ms. ++ value16 |= (APDM_HOST | AFSM_HSUS |PFM_ALDN); ++ } ++ else ++ { ++ value16 |= (APDM_HOST | AFSM_HSUS |PFM_ALDN); ++ } ++ ++ rtw_write16(Adapter, REG_APS_FSMCO,value16 );//0x4802 ++ ++ rtw_write8(Adapter, REG_RSV_CTRL, 0x0e); ++ ++ #if 0 ++ //tynli_test for suspend mode. ++ if(!bWithoutHWSM){ ++ rtw_write8(Adapter, 0xfe10, 0x19); ++ } ++#endif ++ ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Disable Analog Reg0x04:0x%04x.\n",value16)); ++} ++ ++static int ++CardDisableHWSM( // HW Auto state machine ++ IN PADAPTER Adapter, ++ IN BOOLEAN resetMCU ++ ) ++{ ++ int rtStatus = _SUCCESS; ++ if(Adapter->bSurpriseRemoved){ ++ return rtStatus; ++ } ++#if 1 ++ //==== RF Off Sequence ==== ++ _DisableRFAFEAndResetBB(Adapter); ++ ++ // ==== Reset digital sequence ====== ++ _ResetDigitalProcedure1(Adapter, _FALSE); ++ ++ // ==== Pull GPIO PIN to balance level and LED control ====== ++ _DisableGPIO(Adapter); ++ ++ // ==== Disable analog sequence === ++ _DisableAnalog(Adapter, _FALSE); ++ ++ RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("======> Card disable finished.\n")); ++#else ++ _DisableGPIO(Adapter); ++ ++ //reset FW download register ++ _ResetFWDownloadRegister(Adapter); ++ ++ ++ //disable RF/ AFE AD/DA ++ rtStatus = _DisableRF_AFE(Adapter); ++ if(RT_STATUS_SUCCESS != rtStatus){ ++ RT_TRACE(COMP_INIT, DBG_SERIOUS, ("_DisableRF_AFE failed!\n")); ++ goto Exit; ++ } ++ _ResetBB(Adapter); ++ ++ if(resetMCU){ ++ _ResetMCU(Adapter); ++ } ++ ++ _AutoPowerDownToHostOff(Adapter); ++ //_DisableMAC_AFE_PLL(Adapter); ++ ++ _SetUsbSuspend(Adapter); ++Exit: ++#endif ++ return rtStatus; ++ ++} ++ ++static int ++CardDisableWithoutHWSM( // without HW Auto state machine ++ IN PADAPTER Adapter ++ ) ++{ ++ int rtStatus = _SUCCESS; ++ ++ if(Adapter->bSurpriseRemoved){ ++ return rtStatus; ++ } ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Card Disable Without HWSM .\n")); ++ //==== RF Off Sequence ==== ++ _DisableRFAFEAndResetBB(Adapter); ++ ++ // ==== Reset digital sequence ====== ++ _ResetDigitalProcedure1(Adapter, _TRUE); ++ ++ // ==== Pull GPIO PIN to balance level and LED control ====== ++ _DisableGPIO(Adapter); ++ ++ // ==== Reset digital sequence ====== ++ _ResetDigitalProcedure2(Adapter); ++ ++ // ==== Disable analog sequence === ++ _DisableAnalog(Adapter, _TRUE); ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("<====== Card Disable Without HWSM .\n")); ++ return rtStatus; ++} ++ ++static void rtl8192cu_hw_power_down(_adapter *padapter) ++{ ++ // 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. ++ // Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. ++ ++ // Enable register area 0x0-0xc. ++ rtw_write8(padapter,REG_RSV_CTRL, 0x0); ++ rtw_write16(padapter, REG_APS_FSMCO, 0x8812); ++} ++ ++u32 rtl8192cu_hal_deinit(PADAPTER Adapter) ++ { ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ DBG_8192C("==> %s \n",__FUNCTION__); ++ // 2011/02/18 To Fix RU LNA power leakage problem. We need to execute below below in ++ // Adapter init and halt sequence. Accordingto EEchou's opinion, we can enable the ability for all ++ // IC. Accord to johnny's opinion, only RU need the support. ++ if (IS_HARDWARE_TYPE_8192C(Adapter) && (pHalData->BoardType == BOARD_USB_High_PA)) ++ rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|BIT1); ++ ++ #ifdef SUPPORT_HW_RFOFF_DETECTED ++ DBG_8192C("bkeepfwalive(%x)\n",Adapter->pwrctrlpriv.bkeepfwalive); ++ if(Adapter->pwrctrlpriv.bkeepfwalive) ++ { ++ _ps_close_RF(Adapter); ++ if((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown)) ++ rtl8192cu_hw_power_down(Adapter); ++ } ++ else ++#endif ++ { ++ if( Adapter->bCardDisableWOHSM == _FALSE) ++ { ++ DBG_8192C("card disble HWSM...........\n"); ++ CardDisableHWSM(Adapter, _FALSE); ++ } ++ else ++ { ++ DBG_8192C("card disble without HWSM...........\n"); ++ CardDisableWithoutHWSM(Adapter); // without HW Auto state machine ++ ++ if((Adapter->pwrctrlpriv.bHWPwrPindetect ) && (Adapter->pwrctrlpriv.bHWPowerdown)) ++ rtl8192cu_hw_power_down(Adapter); ++ } ++ } ++ ++ return _SUCCESS; ++ } ++ ++ ++unsigned int rtl8192cu_inirp_init(PADAPTER Adapter) ++{ ++ u8 i; ++ struct recv_buf *precvbuf; ++ uint status; ++ struct dvobj_priv *pdev = adapter_to_dvobj(Adapter); ++ struct intf_hdl * pintfhdl=&Adapter->iopriv.intf; ++ struct recv_priv *precvpriv = &(Adapter->recvpriv); ++ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++ u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr); ++#endif ++ ++_func_enter_; ++ ++ _read_port = pintfhdl->io_ops._read_port; ++ ++ status = _SUCCESS; ++ ++ RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init \n")); ++ ++ precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR; ++ ++ //issue Rx irp to receive data ++ precvbuf = (struct recv_buf *)precvpriv->precv_buf; ++ for(i=0; iff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE ) ++ { ++ RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error \n")); ++ status = _FAIL; ++ goto exit; ++ } ++ ++ precvbuf++; ++ precvpriv->free_recv_buf_queue_cnt--; ++ } ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++ _read_interrupt = pintfhdl->io_ops._read_interrupt; ++ if(_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE ) ++ { ++ RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error \n")); ++ status = _FAIL; ++ } ++#endif ++ ++exit: ++ ++ RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("<=== usb_inirp_init \n")); ++ ++_func_exit_; ++ ++ return status; ++ ++} ++ ++unsigned int rtl8192cu_inirp_deinit(PADAPTER Adapter) ++{ ++ RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n ===> usb_rx_deinit \n")); ++ ++ rtw_read_port_cancel(Adapter); ++ ++ RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n <=== usb_rx_deinit \n")); ++ ++ return _SUCCESS; ++} ++ ++ ++//------------------------------------------------------------------------- ++// ++// EEPROM Power index mapping ++// ++//------------------------------------------------------------------------- ++ ++ static VOID ++_ReadPowerValueFromPROM( ++ IN PTxPowerInfo pwrInfo, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoLoadFail ++ ) ++{ ++ u32 rfPath, eeAddr, group; ++ ++ _rtw_memset(pwrInfo, 0, sizeof(TxPowerInfo)); ++ ++ if(AutoLoadFail){ ++ for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){ ++ for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){ ++ pwrInfo->CCKIndex[rfPath][group] = EEPROM_Default_TxPowerLevel; ++ pwrInfo->HT40_1SIndex[rfPath][group] = EEPROM_Default_TxPowerLevel; ++ pwrInfo->HT40_2SIndexDiff[rfPath][group]= EEPROM_Default_HT40_2SDiff; ++ pwrInfo->HT20IndexDiff[rfPath][group] = EEPROM_Default_HT20_Diff; ++ pwrInfo->OFDMIndexDiff[rfPath][group] = EEPROM_Default_LegacyHTTxPowerDiff; ++ pwrInfo->HT40MaxOffset[rfPath][group] = EEPROM_Default_HT40_PwrMaxOffset; ++ pwrInfo->HT20MaxOffset[rfPath][group] = EEPROM_Default_HT20_PwrMaxOffset; ++ } ++ } ++ ++ pwrInfo->TSSI_A = EEPROM_Default_TSSI; ++ pwrInfo->TSSI_B = EEPROM_Default_TSSI; ++ ++ return; ++ } ++ ++ for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){ ++ for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){ ++ eeAddr = EEPROM_CCK_TX_PWR_INX + (rfPath * 3) + group; ++ pwrInfo->CCKIndex[rfPath][group] = PROMContent[eeAddr]; ++ ++ eeAddr = EEPROM_HT40_1S_TX_PWR_INX + (rfPath * 3) + group; ++ pwrInfo->HT40_1SIndex[rfPath][group] = PROMContent[eeAddr]; ++ } ++ } ++ ++ for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){ ++ for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){ ++ pwrInfo->HT40_2SIndexDiff[rfPath][group] = ++ (PROMContent[EEPROM_HT40_2S_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF; ++ ++#if 1 ++ pwrInfo->HT20IndexDiff[rfPath][group] = ++ (PROMContent[EEPROM_HT20_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF; ++ if(pwrInfo->HT20IndexDiff[rfPath][group] & BIT3) //4bit sign number to 8 bit sign number ++ pwrInfo->HT20IndexDiff[rfPath][group] |= 0xF0; ++#else ++ pwrInfo->HT20IndexDiff[rfPath][group] = ++ (PROMContent[EEPROM_HT20_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF; ++#endif ++ ++ pwrInfo->OFDMIndexDiff[rfPath][group] = ++ (PROMContent[EEPROM_OFDM_TX_PWR_INX_DIFF+ group] >> (rfPath * 4)) & 0xF; ++ ++ pwrInfo->HT40MaxOffset[rfPath][group] = ++ (PROMContent[EEPROM_HT40_MAX_PWR_OFFSET+ group] >> (rfPath * 4)) & 0xF; ++ ++ pwrInfo->HT20MaxOffset[rfPath][group] = ++ (PROMContent[EEPROM_HT20_MAX_PWR_OFFSET+ group] >> (rfPath * 4)) & 0xF; ++ } ++ } ++ ++ pwrInfo->TSSI_A = PROMContent[EEPROM_TSSI_A]; ++ pwrInfo->TSSI_B = PROMContent[EEPROM_TSSI_B]; ++ ++} ++ ++ ++static u32 ++_GetChannelGroup( ++ IN u32 channel ++ ) ++{ ++ //RT_ASSERT((channel < 14), ("Channel %d no is supported!\n")); ++ ++ if(channel < 3){ // Channel 1~3 ++ return 0; ++ } ++ else if(channel < 9){ // Channel 4~9 ++ return 1; ++ } ++ ++ return 2; // Channel 10~14 ++} ++ ++ ++static VOID ++ReadTxPowerInfo( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoLoadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ TxPowerInfo pwrInfo; ++ u32 rfPath, ch, group; ++ u8 pwr, diff; ++ ++ _ReadPowerValueFromPROM(&pwrInfo, PROMContent, AutoLoadFail); ++ ++ if(!AutoLoadFail) ++ pHalData->bTXPowerDataReadFromEEPORM = _TRUE; ++ ++ for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ group = _GetChannelGroup(ch); ++ ++ pHalData->TxPwrLevelCck[rfPath][ch] = pwrInfo.CCKIndex[rfPath][group]; ++ pHalData->TxPwrLevelHT40_1S[rfPath][ch] = pwrInfo.HT40_1SIndex[rfPath][group]; ++ ++ pHalData->TxPwrHt20Diff[rfPath][ch] = pwrInfo.HT20IndexDiff[rfPath][group]; ++ pHalData->TxPwrLegacyHtDiff[rfPath][ch] = pwrInfo.OFDMIndexDiff[rfPath][group]; ++ pHalData->PwrGroupHT20[rfPath][ch] = pwrInfo.HT20MaxOffset[rfPath][group]; ++ pHalData->PwrGroupHT40[rfPath][ch] = pwrInfo.HT40MaxOffset[rfPath][group]; ++ ++ pwr = pwrInfo.HT40_1SIndex[rfPath][group]; ++ diff = pwrInfo.HT40_2SIndexDiff[rfPath][group]; ++ ++ pHalData->TxPwrLevelHT40_2S[rfPath][ch] = (pwr > diff) ? (pwr - diff) : 0; ++ } ++ } ++ ++#if DBG ++ ++ for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ RTPRINT(FINIT, INIT_TxPower, ++ ("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n", ++ rfPath, ch, pHalData->TxPwrLevelCck[rfPath][ch], ++ pHalData->TxPwrLevelHT40_1S[rfPath][ch], ++ pHalData->TxPwrLevelHT40_2S[rfPath][ch])); ++ ++ } ++ } ++ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ RTPRINT(FINIT, INIT_TxPower, ("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrHt20Diff[RF_PATH_A][ch])); ++ } ++ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ RTPRINT(FINIT, INIT_TxPower, ("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrLegacyHtDiff[RF_PATH_A][ch])); ++ } ++ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ RTPRINT(FINIT, INIT_TxPower, ("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrHt20Diff[RF_PATH_B][ch])); ++ } ++ ++ for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){ ++ RTPRINT(FINIT, INIT_TxPower, ("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrLegacyHtDiff[RF_PATH_B][ch])); ++ } ++ ++#endif ++ // 2010/10/19 MH Add Regulator recognize for CU. ++ if(!AutoLoadFail) ++ { ++ pHalData->EEPROMRegulatory = (PROMContent[RF_OPTION1]&0x7); //bit0~2 ++ } ++ else ++ { ++ pHalData->EEPROMRegulatory = 0; ++ } ++ DBG_8192C("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory); ++ ++} ++ ++ ++//------------------------------------------------------------------- ++// ++// EEPROM/EFUSE Content Parsing ++// ++//------------------------------------------------------------------- ++static void ++_ReadIDs( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(_FALSE == AutoloadFail){ ++ // VID, PID ++ pHalData->EEPROMVID = le16_to_cpu( *(u16 *)&PROMContent[EEPROM_VID]); ++ pHalData->EEPROMPID = le16_to_cpu( *(u16 *)&PROMContent[EEPROM_PID]); ++ ++ // Customer ID, 0x00 and 0xff are reserved for Realtek. ++ pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CUSTOMER_ID]; ++ pHalData->EEPROMSubCustomerID = *(u8 *)&PROMContent[EEPROM_SUBCUSTOMER_ID]; ++ ++ } ++ else{ ++ pHalData->EEPROMVID = EEPROM_Default_VID; ++ pHalData->EEPROMPID = EEPROM_Default_PID; ++ ++ // Customer ID, 0x00 and 0xff are reserved for Realtek. ++ pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID; ++ pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; ++ ++ } ++ ++ // For customized behavior. ++ if((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMVID == 0x1629))// HP Lite-On for RTL8188CUS Slim Combo. ++ pHalData->CustomerID = RT_CID_819x_HP; ++ ++ // Decide CustomerID according to VID/DID or EEPROM ++ switch(pHalData->EEPROMCustomerID) ++ { ++ case EEPROM_CID_DEFAULT: ++ if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308)) ++ pHalData->CustomerID = RT_CID_DLINK; ++ else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309)) ++ pHalData->CustomerID = RT_CID_DLINK; ++ else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a)) ++ pHalData->CustomerID = RT_CID_DLINK; ++ break; ++ case EEPROM_CID_WHQL: ++/* ++ Adapter->bInHctTest = TRUE; ++ ++ pMgntInfo->bSupportTurboMode = FALSE; ++ pMgntInfo->bAutoTurboBy8186 = FALSE; ++ ++ pMgntInfo->PowerSaveControl.bInactivePs = FALSE; ++ pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE; ++ pMgntInfo->PowerSaveControl.bLeisurePs = FALSE; ++ ++ pMgntInfo->keepAliveLevel = 0; ++ ++ Adapter->bUnloadDriverwhenS3S4 = FALSE; ++*/ ++ break; ++ default: ++ pHalData->CustomerID = RT_CID_DEFAULT; ++ break; ++ ++ } ++ ++ MSG_8192C("EEPROMVID = 0x%04x\n", pHalData->EEPROMVID); ++ MSG_8192C("EEPROMPID = 0x%04x\n", pHalData->EEPROMPID); ++ MSG_8192C("EEPROMCustomerID : 0x%02x\n", pHalData->EEPROMCustomerID); ++ MSG_8192C("EEPROMSubCustomerID: 0x%02x\n", pHalData->EEPROMSubCustomerID); ++ ++ MSG_8192C("RT_CustomerID: 0x%02x\n", pHalData->CustomerID); ++ ++} ++ ++ ++static VOID ++_ReadMACAddress( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); ++ ++ if(_FALSE == AutoloadFail){ ++ //Read Permanent MAC address and set value to hardware ++ _rtw_memcpy(pEEPROM->mac_addr, &PROMContent[EEPROM_MAC_ADDR], ETH_ALEN); ++ } ++ else{ ++ //Random assigh MAC address ++ u8 sMacAddr[MAC_ADDR_LEN] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00}; ++ //sMacAddr[5] = (u8)GetRandomNumber(1, 254); ++ _rtw_memcpy(pEEPROM->mac_addr, sMacAddr, ETH_ALEN); ++ } ++ DBG_8192C("%s MAC Address from EFUSE = "MAC_FMT"\n",__FUNCTION__, MAC_ARG(pEEPROM->mac_addr)); ++ //NicIFSetMacAddress(Adapter, Adapter->PermanentAddress); ++ //RT_PRINT_ADDR(COMP_INIT|COMP_EFUSE, DBG_LOUD, "MAC Addr: %s", Adapter->PermanentAddress); ++ ++} ++ ++static VOID ++_ReadBoardType( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 value32; ++ u8 boardType = BOARD_USB_DONGLE; ++ ++ if(AutoloadFail){ ++ if(IS_8723_SERIES(pHalData->VersionID)) ++ pHalData->rf_type = RF_1T1R; ++ else ++ pHalData->rf_type = RF_2T2R; ++ ++ pHalData->BluetoothCoexist = _FALSE; ++ pHalData->BoardType = boardType; ++ return; ++ } ++ ++ boardType = PROMContent[EEPROM_NORMAL_BoardType]; ++ boardType &= BOARD_TYPE_NORMAL_MASK;//bit[7:5] ++ boardType >>= 5; ++ ++ pHalData->BoardType = boardType; ++ MSG_8192C("_ReadBoardType(%x)\n",pHalData->BoardType); ++ ++ if (boardType == BOARD_USB_High_PA) ++ pHalData->ExternalPA = 1; ++} ++ ++ ++static VOID ++_ReadLEDSetting( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ struct led_priv *pledpriv = &(Adapter->ledpriv); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++#ifdef CONFIG_SW_LED ++ pledpriv->bRegUseLed = _TRUE; ++ ++ // ++ // Led mode ++ // ++ switch(pHalData->CustomerID) ++ { ++ case RT_CID_DEFAULT: ++ pledpriv->LedStrategy = SW_LED_MODE1; ++ pledpriv->bRegUseLed = _TRUE; ++ break; ++ ++ case RT_CID_819x_HP: ++ pledpriv->LedStrategy = SW_LED_MODE6; ++ break; ++ ++ default: ++ pledpriv->LedStrategy = SW_LED_MODE1; ++ break; ++ } ++ ++ if( BOARD_MINICARD == pHalData->BoardType ) ++ { ++ pledpriv->LedStrategy = SW_LED_MODE6; ++ } ++ pHalData->bLedOpenDrain = _TRUE;// Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. ++#else // HW LED ++ pledpriv->LedStrategy = HW_LED; ++#endif //CONFIG_SW_LED ++} ++ ++static VOID ++_ReadThermalMeter( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 tempval; ++ ++ // ++ // ThermalMeter from EEPROM ++ // ++ if(!AutoloadFail) ++ tempval = PROMContent[EEPROM_THERMAL_METER]; ++ else ++ tempval = EEPROM_Default_ThermalMeter; ++ ++ pHalData->EEPROMThermalMeter = (tempval&0x1f); //[4:0] ++ ++ if(pHalData->EEPROMThermalMeter == 0x1f || AutoloadFail) ++ pdmpriv->bAPKThermalMeterIgnore = _TRUE; ++ ++#if 0 ++ if(pHalData->EEPROMThermalMeter < 0x06 || pHalData->EEPROMThermalMeter > 0x1c) ++ pHalData->EEPROMThermalMeter = 0x12; ++#endif ++ ++ pdmpriv->ThermalMeter[0] = pHalData->EEPROMThermalMeter; ++ ++ //RTPRINT(FINIT, INIT_TxPower, ("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter)); ++ ++} ++ ++static VOID ++_ReadRFSetting( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++} ++ ++static void ++_ReadPROMVersion( ++ IN PADAPTER Adapter, ++ IN u8* PROMContent, ++ IN BOOLEAN AutoloadFail ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ if(AutoloadFail){ ++ pHalData->EEPROMVersion = EEPROM_Default_Version; ++ } ++ else{ ++ pHalData->EEPROMVersion = *(u8 *)&PROMContent[EEPROM_VERSION]; ++ } ++} ++ ++static VOID ++readAntennaDiversity( ++ IN PADAPTER pAdapter, ++ IN u8 *hwinfo, ++ IN BOOLEAN AutoLoadFail ++ ) ++{ ++ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ struct registry_priv *registry_par = &pAdapter->registrypriv; ++ ++ if(!AutoLoadFail) ++ { ++ // Antenna Diversity setting. ++ if(registry_par->antdiv_cfg == 2) // 2: From Efuse ++ pHalData->AntDivCfg = (hwinfo[EEPROM_RF_OPT1]&0x18)>>3; ++ else ++ pHalData->AntDivCfg = registry_par->antdiv_cfg ; // 0:OFF , 1:ON, ++ ++ DBG_8192C("### AntDivCfg(%x)\n",pHalData->AntDivCfg); ++ ++ //if(pHalData->EEPROMBluetoothCoexist!=0 && pHalData->EEPROMBluetoothAntNum==Ant_x1) ++ // pHalData->AntDivCfg = 0; ++ } ++ else ++ { ++ pHalData->AntDivCfg = 0; ++ } ++ ++} ++ ++static VOID ++hal_InitPGData( ++ IN PADAPTER pAdapter, ++ IN OUT u8 *PROMContent ++ ) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); ++ u32 i; ++ u16 value16; ++ ++ if(_FALSE == pEEPROM->bautoload_fail_flag) ++ { // autoload OK. ++ if (_TRUE == pEEPROM->EepromOrEfuse) ++ { ++ // Read all Content from EEPROM or EFUSE. ++ for(i = 0; i < HWSET_MAX_SIZE; i += 2) ++ { ++ //value16 = EF2Byte(ReadEEprom(pAdapter, (u2Byte) (i>>1))); ++ //*((u16 *)(&PROMContent[i])) = value16; ++ } ++ } ++ else ++ { ++ // Read EFUSE real map to shadow. ++ EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE); ++ _rtw_memcpy((void*)PROMContent, (void*)pEEPROM->efuse_eeprom_data, HWSET_MAX_SIZE); ++ } ++ } ++ else ++ {//autoload fail ++ //RT_TRACE(COMP_INIT, DBG_LOUD, ("AutoLoad Fail reported from CR9346!!\n")); ++ pEEPROM->bautoload_fail_flag = _TRUE; ++ //update to default value 0xFF ++ if (_FALSE == pEEPROM->EepromOrEfuse) ++ EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE); ++ } ++} ++// Read HW power down mode selection ++static void _ReadPSSetting(IN PADAPTER Adapter,IN u8*PROMContent,IN u8 AutoloadFail) ++{ ++ if(AutoloadFail){ ++ Adapter->pwrctrlpriv.bHWPowerdown = _FALSE; ++ Adapter->pwrctrlpriv.bSupportRemoteWakeup = _FALSE; ++ } ++ else { ++ //if(SUPPORT_HW_RADIO_DETECT(Adapter)) ++ Adapter->pwrctrlpriv.bHWPwrPindetect = Adapter->registrypriv.hwpwrp_detect; ++ //else ++ //Adapter->pwrctrlpriv.bHWPwrPindetect = _FALSE;//dongle not support new ++ ++ ++ //hw power down mode selection , 0:rf-off / 1:power down ++ ++ if(Adapter->registrypriv.hwpdn_mode==2) ++ Adapter->pwrctrlpriv.bHWPowerdown = (PROMContent[EEPROM_RF_OPT3] & BIT4); ++ else ++ Adapter->pwrctrlpriv.bHWPowerdown = Adapter->registrypriv.hwpdn_mode; ++#ifdef CONFIG_WOWLAN ++ // decide hw if support remote wakeup function ++ // if hw supported, 8051 (SIE) will generate WeakUP signal( D+/D- toggle) when autoresume ++ Adapter->pwrctrlpriv.bSupportRemoteWakeup = (PROMContent[EEPROM_TEST_USB_OPT] & BIT1)?_TRUE :_FALSE; ++#endif //CONFIG_WOWLAN ++ ++ //if(SUPPORT_HW_RADIO_DETECT(Adapter)) ++ //Adapter->registrypriv.usbss_enable = Adapter->pwrctrlpriv.bSupportRemoteWakeup ; ++ ++ DBG_8192C("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) ,bSupportRemoteWakeup(%x)\n",__FUNCTION__, ++ Adapter->pwrctrlpriv.bHWPwrPindetect,Adapter->pwrctrlpriv.bHWPowerdown ,Adapter->pwrctrlpriv.bSupportRemoteWakeup); ++ ++ DBG_8192C("### PS params=> power_mgnt(%x),usbss_enable(%x) ###\n",Adapter->registrypriv.power_mgnt,Adapter->registrypriv.usbss_enable); ++ ++ } ++ ++} ++ ++static VOID ++readAdapterInfo_8192CU( ++ IN PADAPTER Adapter ++ ) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); ++ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); ++ u8 PROMContent[HWSET_MAX_SIZE]={0}; ++ ++ hal_InitPGData(Adapter, PROMContent); ++ rtl8192c_EfuseParseIDCode(Adapter, PROMContent); ++ ++ _ReadPROMVersion(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadIDs(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadMACAddress(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ ReadTxPowerInfo(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadBoardType(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ ++#ifdef CONFIG_BT_COEXIST ++ // ++ // Read Bluetooth co-exist and initialize ++ // ++ rtl8192c_ReadBluetoothCoexistInfo(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++#endif ++ ++ rtl8192c_EfuseParseChnlPlan(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadThermalMeter(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadLEDSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadRFSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ _ReadPSSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ readAntennaDiversity(Adapter, PROMContent, pEEPROM->bautoload_fail_flag); ++ ++ //hal_CustomizedBehavior_8723U(Adapter); ++ ++ Adapter->bDongle = (PROMContent[EEPROM_EASY_REPLACEMENT] == 1)? 0: 1; ++ DBG_8192C("%s(): REPLACEMENT = %x\n",__FUNCTION__,Adapter->bDongle); ++#ifdef CONFIG_INTEL_PROXIM ++ /* for intel proximity */ ++ if (pHalData->rf_type== RF_1T1R) { ++ Adapter->proximity.proxim_support = _TRUE; ++ } else if (pHalData->rf_type== RF_2T2R) { ++ if ((pHalData->EEPROMPID == 0x8186) && ++ (pHalData->EEPROMVID== 0x0bda)) ++ Adapter->proximity.proxim_support = _TRUE; ++ } else { ++ Adapter->proximity.proxim_support = _FALSE; ++ } ++#endif //CONFIG_INTEL_PROXIM ++} ++ ++static void _ReadPROMContent( ++ IN PADAPTER Adapter ++ ) ++{ ++ EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 PROMContent[HWSET_MAX_SIZE]={0}; ++ u8 eeValue; ++ u32 i; ++ u16 value16; ++ ++ eeValue = rtw_read8(Adapter, REG_9346CR); ++ // To check system boot selection. ++ pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE; ++ pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE; ++ ++ ++ DBG_8192C("Boot from %s, Autoload %s !\n", (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"), ++ (pEEPROM->bautoload_fail_flag ? "Fail" : "OK") ); ++ ++ //pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; ++ ++ //if(IS_HARDWARE_TYPE_8723A(Adapter)) ++ // readAdapterInfo_8723U(Adapter); ++ //else ++ readAdapterInfo_8192CU(Adapter); ++} ++ ++ ++static VOID ++_InitOtherVariable( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ ++ //if(Adapter->bInHctTest){ ++ // pMgntInfo->PowerSaveControl.bInactivePs = FALSE; ++ // pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE; ++ // pMgntInfo->PowerSaveControl.bLeisurePs = FALSE; ++ // pMgntInfo->keepAliveLevel = 0; ++ //} ++ ++ // 2009/06/10 MH For 92S 1*1=1R/ 1*2&2*2 use 2R. We default set 1*1 use radio A ++ // So if you want to use radio B. Please modify RF path enable bit for correct signal ++ // strength calculate. ++ if (pHalData->rf_type == RF_1T1R){ ++ pHalData->bRFPathRxEnable[0] = _TRUE; ++ } ++ else{ ++ pHalData->bRFPathRxEnable[0] = pHalData->bRFPathRxEnable[1] = _TRUE; ++ } ++ ++} ++ ++static VOID ++_ReadRFType( ++ IN PADAPTER Adapter ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++#if DISABLE_BB_RF ++ pHalData->rf_chip = RF_PSEUDO_11N; ++#else ++ pHalData->rf_chip = RF_6052; ++#endif ++} ++ ++void _ReadSilmComboMode(PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++ pHalData->SlimComboDbg = _FALSE; // Default is not debug mode. ++ ++ // 2010/11/22 MH We need to enter debug mode for TSMA and UMC A cut ++ if ((Adapter->chip_type == RTL8188C_8192C) && ++ (pHalData->BoardType == BOARD_USB_COMBO)) ++ { ++ switch (pHalData->VersionID) ++ { ++ case VERSION_NORMAL_TSMC_CHIP_88C: ++ case VERSION_NORMAL_TSMC_CHIP_92C: ++ case VERSION_NORMAL_TSMC_CHIP_92C_1T2R: ++ case VERSION_NORMAL_UMC_CHIP_88C_A_CUT: ++ case VERSION_NORMAL_UMC_CHIP_92C_A_CUT: ++ case VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT: ++ if ((rtw_read8(Adapter, REG_SYS_CFG+3) &0xF0) == 0x20) ++ pHalData->SlimComboDbg = _TRUE; ++ ++ break; ++ ++ case VERSION_NORMAL_UMC_CHIP_88C_B_CUT: ++ case VERSION_NORMAL_UMC_CHIP_92C_B_CUT: ++ case VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT: ++ // 2011/02/15 MH UNC-B cut ECO fail, we need to support slim combo debug mode. ++ if ((rtw_read8(Adapter, REG_SYS_CFG+3) &0xF0) == 0x20) ++ pHalData->SlimComboDbg = _TRUE; ++ break; ++ ++ default: ++ break; ++ } ++ ++ } ++ ++} ++static int _ReadAdapterInfo8192CU(PADAPTER Adapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u32 start=rtw_get_current_time(); ++ ++ MSG_8192C("====> ReadAdapterInfo8192C\n"); ++ ++ //Efuse_InitSomeVar(Adapter); ++ ++ //if(IS_HARDWARE_TYPE_8723A(Adapter)) ++ // _EfuseCellSel(Adapter); ++ ++ _ReadRFType(Adapter);//rf_chip -> _InitRFType() ++ _ReadPROMContent(Adapter); ++ ++ // 2010/10/25 MH THe function must be called after borad_type & IC-Version recognize. ++ _ReadSilmComboMode(Adapter); ++ ++ _InitOtherVariable(Adapter); ++ ++ //MSG_8192C("%s()(done), rf_chip=0x%x, rf_type=0x%x\n", __FUNCTION__, pHalData->rf_chip, pHalData->rf_type); ++ ++ MSG_8192C("<==== ReadAdapterInfo8192C in %d ms\n", rtw_get_passing_time_ms(start)); ++ ++ return _SUCCESS; ++} ++ ++ ++static void ReadAdapterInfo8192CU(PADAPTER Adapter) ++{ ++ // Read EEPROM size before call any EEPROM function ++ //Adapter->EepromAddressSize=Adapter->HalFunc.GetEEPROMSizeHandler(Adapter); ++ Adapter->EepromAddressSize = GetEEPROMSize8192C(Adapter); ++ ++ _ReadAdapterInfo8192CU(Adapter); ++} ++ ++ ++#define GPIO_DEBUG_PORT_NUM 0 ++static void rtl8192cu_trigger_gpio_0(_adapter *padapter) ++{ ++ ++ u32 gpioctrl; ++ DBG_8192C("==> trigger_gpio_0...\n"); ++ rtw_write16_async(padapter,REG_GPIO_PIN_CTRL,0); ++ rtw_write8_async(padapter,REG_GPIO_PIN_CTRL+2,0xFF); ++ gpioctrl = (BIT(GPIO_DEBUG_PORT_NUM)<<24 )|(BIT(GPIO_DEBUG_PORT_NUM)<<16); ++ rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl); ++ gpioctrl |= (BIT(GPIO_DEBUG_PORT_NUM)<<8); ++ rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl); ++ DBG_8192C("<=== trigger_gpio_0...\n"); ++ ++} ++ ++static void ResumeTxBeacon(_adapter *padapter) ++{ ++ HAL_DATA_TYPE* pHalData = GET_HAL_DATA(padapter); ++ ++ // 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value ++ // which should be read from register to a global variable. ++ ++ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) | BIT6); ++ pHalData->RegFwHwTxQCtrl |= BIT6; ++} ++ ++static void StopTxBeacon(_adapter *padapter) ++{ ++ HAL_DATA_TYPE* pHalData = GET_HAL_DATA(padapter); ++ ++ // 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value ++ // which should be read from register to a global variable. ++ ++ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) & (~BIT6)); ++ pHalData->RegFwHwTxQCtrl &= (~BIT6); ++ ++ //todo: CheckFwRsvdPageContent(Adapter); // 2010.06.23. Added by tynli. ++ ++} ++ ++u16 CRC16(u8 data,u16 CRC) ++{ ++ unsigned char shift_in,CRC_BIT15,DataBit,CRC_BIT11,CRC_BIT4 ; ++ int index; ++ unsigned short CRC_Result; ++ ++ for(index=0;index<8;index++) ++ { ++ CRC_BIT15=((CRC&BIT15) ? 1:0); ++ DataBit =(data&(BIT0<iface_type == IFACE_PORT1) ++ { ++ // disable Port1 TSF update ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4)); ++ ++ // set net_type ++ val8 = rtw_read8(Adapter, MSR)&0x03; ++ val8 |= (mode<<2); ++ rtw_write8(Adapter, MSR, val8); ++ ++ //reset TSF1 ++ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)); ++ ++ DBG_871X("%s()-%d mode = %d\n", __FUNCTION__, __LINE__, mode); ++ ++ if((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) ++ { ++ if(!check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE)) ++ { ++ StopTxBeacon(Adapter); ++ } ++ ++ rtw_write8(Adapter,REG_BCN_CTRL_1, 0x19);//disable atim wnd ++ //rtw_write8(Adapter,REG_BCN_CTRL_1, 0x18); ++ } ++ else if((mode == _HW_STATE_ADHOC_) /*|| (mode == _HW_STATE_AP_)*/) ++ { ++ ResumeTxBeacon(Adapter); ++ rtw_write8(Adapter,REG_BCN_CTRL_1, 0x1a); ++ } ++ else if(mode == _HW_STATE_AP_) ++ { ++ ResumeTxBeacon(Adapter); ++ ++ rtw_write8(Adapter, REG_BCN_CTRL_1, 0x12); ++ ++ //Set RCR ++ //rtw_write32(padapter, REG_RCR, 0x70002a8e);//CBSSID_DATA must set to 0 ++ rtw_write32(Adapter, REG_RCR, 0x7000228e);//CBSSID_DATA must set to 0 ++ //enable to rx data frame ++ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF); ++ //enable to rx ps-poll ++ rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400); ++ ++ //Beacon Control related register for first time ++ rtw_write8(Adapter, REG_BCNDMATIM, 0x02); // 2ms ++ rtw_write8(Adapter, REG_DRVERLYINT, 0x05);// 5ms ++ //rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF); ++ rtw_write8(Adapter, REG_ATIMWND_1, 0x0a); // 10ms for port1 ++ rtw_write16(Adapter, REG_BCNTCFG, 0x00); ++ rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04); ++ rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);// +32767 (~32ms) ++ ++ ++ //enable BCN1 Function for if2 ++ //don't enable update TSF1 for if2 (due to TSF update when beacon/probe rsp are received) ++ rtw_write8(Adapter, REG_BCN_CTRL_1, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | EN_TXBCN_RPT|BIT(1))); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(Adapter, WIFI_FW_NULL_STATE)) ++ rtw_write8(Adapter, REG_BCN_CTRL, ++ rtw_read8(Adapter, REG_BCN_CTRL) & ~EN_BCN_FUNCTION); ++#endif ++ ++ DBG_871X("%s()-%d: REG_BCN_CTRL_1 = %02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_BCN_CTRL_1)); ++ ++ //BCN1 TSF will sync to BCN0 TSF with offset(0x518) if if1_sta linked ++ //rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(5)); ++ //rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(3)); ++ ++ //dis BCN0 ATIM WND if if1 is station ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(0)); ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++ // Reset TSF for STA+AP concurrent mode ++ if ( check_buddy_fwstate(Adapter, (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ) { ++ if (reset_tsf(Adapter, IFACE_PORT1) == _FALSE) ++ DBG_871X("ERROR! %s()-%d: Reset port1 TSF fail\n", ++ __FUNCTION__, __LINE__); ++ } ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ } ++ ++ } ++ else // (Adapter->iface_type == IFACE_PORT1) ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ // disable Port0 TSF update ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); ++ ++ // set net_type ++ val8 = rtw_read8(Adapter, MSR)&0x0c; ++ val8 |= mode; ++ rtw_write8(Adapter, MSR, val8); ++ ++ //reset TSF0 ++ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0)); ++ ++ DBG_871X("%s()-%d mode = %d\n", __FUNCTION__, __LINE__, mode); ++ ++ if((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if(!check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE)) ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ StopTxBeacon(Adapter); ++ } ++ ++ rtw_write8(Adapter,REG_BCN_CTRL, 0x19);//disable atim wnd ++ //rtw_write8(Adapter,REG_BCN_CTRL, 0x18); ++ } ++ else if((mode == _HW_STATE_ADHOC_) /*|| (mode == _HW_STATE_AP_)*/) ++ { ++ ResumeTxBeacon(Adapter); ++ rtw_write8(Adapter,REG_BCN_CTRL, 0x1a); ++ } ++ else if(mode == _HW_STATE_AP_) ++ { ++ ResumeTxBeacon(Adapter); ++ ++ rtw_write8(Adapter, REG_BCN_CTRL, 0x12); ++ ++ //Set RCR ++ //write32(padapter, REG_RCR, 0x70002a8e);//CBSSID_DATA must set to 0 ++ rtw_write32(Adapter, REG_RCR, 0x7000228e);//CBSSID_DATA must set to 0 ++ //enable to rx data frame ++ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF); ++ //enable to rx ps-poll ++ rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400); ++ ++ //Beacon Control related register for first time ++ ++ rtw_write8(Adapter, REG_BCNDMATIM, 0x02); // 2ms ++ rtw_write8(Adapter, REG_DRVERLYINT, 0x05);// 5ms ++ ++ //write8(Adapter, REG_BCN_MAX_ERR, 0xFF); ++ rtw_write8(Adapter, REG_ATIMWND, 0x0a); // 10ms for port0 ++ rtw_write16(Adapter, REG_BCNTCFG, 0x00); ++ rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04); ++ rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);// +32767 (~32ms) ++ ++ //enable BCN0 Function for if1 ++ //don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) ++ rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | EN_TXBCN_RPT|BIT(1))); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(Adapter, WIFI_FW_NULL_STATE)) ++ rtw_write8(Adapter, REG_BCN_CTRL_1, ++ rtw_read8(Adapter, REG_BCN_CTRL_1) & ~EN_BCN_FUNCTION); ++#endif ++ //BCN1 TSF will sync to BCN0 TSF with offset(0x518) if if1_sta linked ++ //only interface 2 as AP MODE need to sync ++ //rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(5)); ++ ++ ++ //dis BCN1 ATIM WND if if2 is station ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(0)); ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++ // Reset TSF for STA+AP concurrent mode ++ if ( check_buddy_fwstate(Adapter, (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ) { ++ if (reset_tsf(Adapter, IFACE_PORT0) == _FALSE) ++ DBG_871X("ERROR! %s()-%d: Reset port0 TSF fail\n", ++ __FUNCTION__, __LINE__); ++ } ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ ++ } ++ ++ ++ } ++ ++} ++ ++static void hw_var_set_macaddr(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ u8 idx = 0; ++ u32 reg_macid; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ { ++ reg_macid = REG_MACID1; ++ } ++ else ++#endif ++ { ++ reg_macid = REG_MACID; ++ } ++ ++ for(idx = 0 ; idx < 6; idx++) ++ { ++ rtw_write8(Adapter, (reg_macid+idx), val[idx]); ++ } ++ ++} ++ ++static void hw_var_set_bssid(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ u8 idx = 0; ++ u32 reg_bssid; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ { ++ reg_bssid = REG_BSSID1; ++ } ++ else ++#endif ++ { ++ reg_bssid = REG_BSSID; ++ } ++ ++ for(idx = 0 ; idx < 6; idx++) ++ { ++ rtw_write8(Adapter, (reg_bssid+idx), val[idx]); ++ } ++ ++} ++ ++static void hw_var_set_bcn_func(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ u32 bcn_ctrl_reg; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ { ++ bcn_ctrl_reg = REG_BCN_CTRL_1; ++ ++ if(*((u8 *)val)) ++ { ++ rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT)); ++ } ++ else ++ { ++ rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT))); ++ } ++ } ++ else ++#endif ++ { ++ bcn_ctrl_reg = REG_BCN_CTRL; ++ if(*((u8 *)val)) ++ { ++ rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT)); ++ } ++ else ++ { ++ //rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT))); ++ rtw_write8(Adapter, bcn_ctrl_reg, (rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_TXBCN_RPT))) | DIS_TSF_UDT0_NORMAL_CHIP); ++ } ++ } ++ ++ ++} ++ ++#ifdef CONFIG_WOWLAN ++static int rtw_wowlan_set_pattern(_adapter *padapter ,u8* pbuf){ ++ struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv; ++ int res=0,crc_idx; ++ u32 content=0,cmd=0; ++ u32 *pdata; ++ u8 config,crc,mc,bc,uc,idx,pattern_len,packet[200],packet_len,valid; ++ u16 crc_val=0,i; ++ ++ config=pbuf[0]; ++ bc=config & BIT(3)?1:0; ++ mc=config & BIT(4)?1:0; ++ uc=config & BIT(5)?1:0; ++ idx=config & 0x7; ++ crc=config & BIT(6)?1:0; ++ valid=config & BIT(7)?1:0; ++ pattern_len=pbuf[1]; ++ packet_len=pattern_len*8; ++ pdata=(u32 *)pbuf; ++ ++ // Write to the Wakeup CAM ++ //offset 0 ++ if(pattern_len>=4){ ++ content=pdata[1]; ++ } ++ else{ ++ content=0; ++ } ++ DBG_8192C("\nrtw_wowlan_set_pattern offset[0] content 0x%x [cpu_to_le32 0x%x]\n", content,__cpu_to_le32(content)); ++ //rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content)); ++ pwrpriv->wowlan_pattern_context[idx][0]= __cpu_to_le32(content); ++ //cmd=BIT(31)|BIT(16)|(idx+0); ++ //rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ //offset 4 ++ if(pattern_len>=8){ ++ content=pdata[2]; ++ } ++ else{ ++ content=0; ++ } ++ DBG_8192C("rtw_wowlan_set_pattern offset[4] content 0x%x [cpu_to_le32 0x%x]\n", content,__cpu_to_le32(content)); ++ //rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content)); ++ pwrpriv->wowlan_pattern_context[idx][1]= __cpu_to_le32(content); ++ ++ //cmd=BIT(31)|BIT(16)|(idx+1); ++ //rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ //offset 8 ++ if(pattern_len>=12){ ++ content=pdata[3]; ++ } ++ else{ ++ content=0; ++ } ++ DBG_8192C("rtw_wowlan_set_pattern offset[8] content 0x%x [cpu_to_le32 0x%x]\n", content,__cpu_to_le32(content)); ++ //rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content)); ++ pwrpriv->wowlan_pattern_context[idx][2]= __cpu_to_le32(content); ++ //cmd=BIT(31)|BIT(16)|(idx+2); ++ //rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ //offset 12 ++ if(pattern_len>=16){ ++ content=pdata[4]; ++ } ++ else{ ++ content=0; ++ } ++ DBG_8192C("rtw_wowlan_set_pattern offset[12] content 0x%x [cpu_to_le32 0x%x]\n", content,__cpu_to_le32(content)); ++ //rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content)); ++ pwrpriv->wowlan_pattern_context[idx][3]= __cpu_to_le32(content); ++ //cmd=BIT(31)|BIT(16)|(idx+3); ++ //rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ if(crc){ ++ // Have the CRC value ++ crc_val=*(u16 *)(&pbuf[2]); ++ DBG_8192C("rtw_wowlan_set_pattern crc_val 0x%x \n", crc_val); ++ crc_val=__cpu_to_le16(crc_val); ++ DBG_8192C("rtw_wowlan_set_pattern crc_val after 0x%x \n", crc_val); ++ } ++ else{ ++ DBG_8192C("+rtw_wowlan_set_pattern crc=0[%x] Should calculate the CRC\n", crc); ++ // calculate the CRC the write to the Wakeup CAM ++ crc_idx=0; ++ for(i=0;iwowlan_pattern_context[idx][4]= content; ++ //cmd=BIT(31)|BIT(16)|(idx+4); ++ //rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ pwrpriv->wowlan_pattern_idx|=BIT(idx); ++ ++_rtw_wowlan_set_pattern_exit: ++ return res; ++} ++ ++ ++ ++void rtw_wowlan_reload_pattern(_adapter *padapter){ ++ struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv; ++ u32 content=0,cmd=0; ++ u8 idx; ++ ++ for (idx=0;idx<8;idx ++){ ++ if(pwrpriv->wowlan_pattern_idx & BIT(idx)){ ++ //offset 0 ++ rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][0]); ++ cmd=BIT(31)|BIT(16)|(idx+0); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ //offset 4 ++ rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][1]); ++ cmd=BIT(31)|BIT(16)|(idx+1); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ //offset 8 ++ rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][2]); ++ cmd=BIT(31)|BIT(16)|(idx+2); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ //offset 12 ++ rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][3]); ++ cmd=BIT(31)|BIT(16)|(idx+3); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ //offset 16 ++ rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][4]); ++ cmd=BIT(31)|BIT(16)|(idx+4); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ ++ } ++ printk("print WOWCAM idx =%d\n",idx); ++ cmd=BIT(31)|(idx+0); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ printk("print WOWCAM offset[0] =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD)); ++ cmd=BIT(31)|(idx+1); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ printk("print WOWCAM offset[1] =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD)); ++ cmd=BIT(31)|(idx+2); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ printk("print WOWCAM offset[2] =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD)); ++ cmd=BIT(31)|(idx+3); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ printk("print WOWCAM offset[3] =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD)); ++ cmd=BIT(31)|(idx+4); ++ rtw_write32(padapter, REG_WKFMCAM_CMD, cmd); ++ printk("print WOWCAM offset[4] =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD)); ++ ++ ++ } ++} ++#endif //CONFIG_WOWLAN ++ ++static void hw_var_set_correct_tsf(PADAPTER Adapter, u8 variable, u8* val) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ u64 tsf; ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //tsf = pmlmeext->TSFValue - ((u32)pmlmeext->TSFValue % (pmlmeinfo->bcn_interval*1024)) -1024; //us ++ tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) -1024; //us ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //pHalData->RegTxPause |= STOP_BCNQ;BIT(6) ++ //rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)|BIT(6))); ++ StopTxBeacon(Adapter); ++ } ++ ++ if(Adapter->iface_type == IFACE_PORT1) ++ { ++ //disable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3))); ++ ++ rtw_write32(Adapter, REG_TSFTR1, tsf); ++ rtw_write32(Adapter, REG_TSFTR1+4, tsf>>32); ++ ++ //enable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(3)); ++ ++ ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++ // Update buddy port's TSF(TBTT) if it is SoftAP for beacon TX issue! ++ if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE ++ && check_buddy_fwstate(Adapter, WIFI_AP_STATE) ) { ++ if (reset_tsf(Adapter, IFACE_PORT0) == _FALSE) ++ DBG_871X("ERROR! %s()-%d: Reset port0 TSF fail\n", ++ __FUNCTION__, __LINE__); ++ } ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ ++ } ++ else // Adapter->iface_type == IFACE_PORT1 ++ { ++ //disable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3))); ++ // disable TSF update instead! May induce burst beacon TX ++ //rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); ++ ++ rtw_write32(Adapter, REG_TSFTR, tsf); ++ rtw_write32(Adapter, REG_TSFTR+4, tsf>>32); ++ ++ //enable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3)); ++ //rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); ++ ++ // Update buddy port's TSF if it is SoftAP for beacon TX issue! ++ if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE ++ && check_buddy_fwstate(Adapter, WIFI_AP_STATE) ++ ) { ++ //disable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3))); ++ // disable TSF update instead! ++ //rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4)); ++ ++ rtw_write32(Adapter, REG_TSFTR1, tsf); ++ rtw_write32(Adapter, REG_TSFTR1+4, tsf>>32); ++ ++ //enable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(3)); ++ //rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(4))); ++ } ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++ // Update buddy port's TSF if it is SoftAP for beacon TX issue! ++ if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE ++ && check_buddy_fwstate(Adapter, WIFI_AP_STATE) ) { ++ if (reset_tsf(Adapter, IFACE_PORT1) == _FALSE) ++ DBG_871X("ERROR! %s()-%d: Reset port1 TSF fail\n", ++ __FUNCTION__, __LINE__); ++ } ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ } ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //pHalData->RegTxPause &= (~STOP_BCNQ); ++ //rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)&(~BIT(6)))); ++ ResumeTxBeacon(Adapter); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++} ++ ++static void hw_var_set_mlme_disconnect(PADAPTER Adapter, u8 variable, u8* val) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; ++ ++ ++ if(check_buddy_mlmeinfo_state(Adapter, _HW_STATE_NOLINK_)) ++ rtw_write16(Adapter, REG_RXFLTMAP2, 0x00); ++ ++ ++ if(Adapter->iface_type == IFACE_PORT1) ++ { ++ int i; ++ u8 reg_bcn_ctrl_1; ++ ++ // a.Driver set 0x422 bit 6 =0 ++ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) & (~BIT6)); ++ pHalData->RegFwHwTxQCtrl &= (~BIT6); ++ ++ ++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD ++ u8 reg_bcn_disable_cnt = rtw_read8(Adapter, REG_FW_BCN_DIS_CNT); ++ DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, reg_bcn_disable_cnt); ++ ++ reg_bcn_ctrl_1 = rtw_read8(Adapter, REG_BCN_CTRL_1); ++ DBG_871X("%s()-%d: reg_bcn_ctrl_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1); ++ ++ // b. driver set h2c cmd ++ rtl8192c_dis_beacon_fun_cmd(Adapter); ++ ++ /* ++ // FW Job for port 0 ++ ++ c. 8051 set nettype to ap ++ d. 8051 check dma_int ++ e. 8051 set nettype to no_link ++ f.8051 dis_tsf_update 0x550 bit 4 ++ g.8051 reset beacon function test count 0x553 bit0. ++ h.8051 disable beacon function 0x550 bit3 ++ i. 8051 sent ready to driver ++ ++ */ ++ ++ // The worst case is 100 + 15 ms ++ rtw_msleep_os(120); ++ ++ for (i=0; i< 10; i++) { ++ reg_bcn_ctrl_1 = rtw_read8(Adapter, REG_BCN_CTRL_1); ++ if ( (reg_bcn_ctrl_1 & BIT(3)) == 0 ) { ++ //DBG_871X("%s()-%d: BEACON_DISABLE_OFFLOAD finished! reg=%02x\n", __FUNCTION__, __LINE__, reg); ++ break; ++ } ++ DBG_871X("%s()-%d: BEACON_DISABLE_OFFLOAD not finished! REG_BCN_CTRL_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1); ++ DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_FW_BCN_DIS_CNT)); ++ DBG_871X("%s()-%d: REG_BCN_CTRL=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_BCN_CTRL)); ++ DBG_871X("%s()-%d: FWISR=%08x\n", __FUNCTION__, __LINE__, rtw_read32(Adapter, REG_FWISR)); ++ rtw_msleep_os(100); ++ } ++ DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_FW_BCN_DIS_CNT)); ++ DBG_871X("%s()-%d: reg_bcn_ctrl_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1); ++ ++#else // CONFIG_BEACON_DISABLE_OFFLOAD ++ ++ //disable update TSF1 ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4)); ++ ++ //reset TSF1 ++ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)); ++ ++ // disable Port1's beacon function ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3))); ++ ++#endif // CONFIG_BEACON_DISABLE_OFFLOAD ++ ++ // j, Driver set 0x422 bit 6 =1 ++ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) | BIT6); ++ pHalData->RegFwHwTxQCtrl |= BIT6; ++ ++ // k. re_download beacon pkt ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE)) ++ set_tx_beacon_cmd(pbuddy_adapter); ++ ++ ++ } ++ else // (Adapter->iface_type == IFACE_PORT1) ++ { ++ //disable update TSF ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); ++ ++ //reset TSF ++ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0)); ++ ++ // Can't disable Port0's beacon function due to it is used by RA ++ } ++#endif ++} ++ ++static void hw_var_set_mlme_sitesurvey(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ u32 value_rcr, rcr_clear_bit, reg_bcn_ctl; ++ u16 value_rxfltmap2; ++ struct mlme_priv *pmlmepriv=&(Adapter->mlmepriv); ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(Adapter->iface_type == IFACE_PORT1) ++ reg_bcn_ctl = REG_BCN_CTRL_1; ++ else ++#endif ++ reg_bcn_ctl = REG_BCN_CTRL; ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ ++ if( (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++#ifdef CONFIG_CONCURRENT_MODE ++ || (check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE) ++#endif ++#ifdef CONFIG_TDLS ++ // TDLS will clear RCR_CBSSID_DATA bit for connection. ++ || ( Adapter->tdlsinfo.setup_state & TDLS_LINKED_STATE ) ++#endif // CONFIG_TDLS ++ ) ++ { ++ rcr_clear_bit = RCR_CBSSID_BCN; ++ } ++ else ++ { ++ rcr_clear_bit = (RCR_CBSSID_BCN | RCR_CBSSID_DATA); ++ } ++ ++ // Recieve all data frames ++ value_rxfltmap2 = 0xFFFF; ++ ++#else /* CONFIG_FIND_BEST_CHANNEL */ ++ ++ rcr_clear_bit = RCR_CBSSID_BCN; ++ ++ //config RCR to receive different BSSID & not to receive data frame ++ value_rxfltmap2 = 0; ++ ++#endif /* CONFIG_FIND_BEST_CHANNEL */ ++ ++ value_rcr = rtw_read32(Adapter, REG_RCR); ++ ++ if(*((u8 *)val))//under sitesurvey ++ { ++ value_rcr &= ~(rcr_clear_bit); ++ rtw_write32(Adapter, REG_RCR, value_rcr); ++ ++ rtw_write16(Adapter, REG_RXFLTMAP2, value_rxfltmap2); ++ ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_ADHOC_STATE |WIFI_ADHOC_MASTER_STATE)) { ++ //disable update TSF ++ rtw_write8(Adapter, reg_bcn_ctl, rtw_read8(Adapter, reg_bcn_ctl)|BIT(4)); ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(Adapter, _FW_LINKED)) ++ { ++ StopTxBeacon(Adapter); ++ } ++#endif ++ } ++ else//sitesurvey done ++ { ++ if(check_fwstate(pmlmepriv, _FW_LINKED) || check_fwstate(pmlmepriv, WIFI_AP_STATE) ++#ifdef CONFIG_CONCURRENT_MODE ++ || check_buddy_fwstate(Adapter, _FW_LINKED) || check_buddy_fwstate(Adapter, WIFI_AP_STATE) ++#endif ++ ) ++ { ++ //enable to rx data frame ++ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); ++ } ++ ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_ADHOC_STATE |WIFI_ADHOC_MASTER_STATE)) { ++ //enable update TSF ++ rtw_write8(Adapter, reg_bcn_ctl, rtw_read8(Adapter, reg_bcn_ctl)&(~BIT(4))); ++ } ++ ++ value_rcr |= rcr_clear_bit; ++ rtw_write32(Adapter, REG_RCR, value_rcr); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(Adapter, _FW_LINKED)) ++ { ++ ResumeTxBeacon(Adapter); ++ } ++#endif ++ } ++} ++ ++static void hw_var_set_mlme_join(PADAPTER Adapter, u8 variable, u8* val) ++{ ++#ifdef CONFIG_CONCURRENT_MODE ++ u8 RetryLimit = 0x30; ++ u8 type = *((u8 *)val); ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ ++ if(type == 0) // prepare to join ++ { ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(Adapter, _FW_LINKED)) ++ { ++ StopTxBeacon(Adapter); ++ } ++ ++ //enable to rx data frame.Accept all data frame ++ //rtw_write32(padapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF); ++ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); ++ ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE)) ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN); ++ else ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN); ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ RetryLimit = (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48; ++ } ++ else // Ad-hoc Mode ++ { ++ RetryLimit = 0x7; ++ } ++ } ++ else if(type == 1) //joinbss_event call back when join res < 0 ++ { ++ if(check_buddy_mlmeinfo_state(Adapter, _HW_STATE_NOLINK_)) ++ rtw_write16(Adapter, REG_RXFLTMAP2,0x00); ++ ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(Adapter, _FW_LINKED)) ++ { ++ ResumeTxBeacon(Adapter); ++ ++ //reset TSF 1/2 after ResumeTxBeacon ++ //rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)|BIT(0)); ++ ++ } ++ } ++ else if(type == 2) //sta add event call back ++ { ++ ++ //enable update TSF ++ if(Adapter->iface_type == IFACE_PORT1) ++ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(4))); ++ else ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); ++ ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE)) ++ { ++ //fixed beacon issue for 8191su........... ++ rtw_write8(Adapter,0x542 ,0x02); ++ RetryLimit = 0x7; ++ } ++ ++ ++ if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) && ++ check_buddy_fwstate(Adapter, _FW_LINKED)) ++ { ++ ResumeTxBeacon(Adapter); ++ ++ //reset TSF 1/2 after ResumeTxBeacon ++ //rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)|BIT(0)); ++ } ++ ++ } ++ ++ rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT); ++ ++#endif ++} ++ ++void SetHwReg8192CU(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++_func_enter_; ++ ++ switch(variable) ++ { ++ case HW_VAR_MEDIA_STATUS: ++ { ++ u8 val8; ++ ++ val8 = rtw_read8(Adapter, MSR)&0x0c; ++ val8 |= *((u8 *)val); ++ rtw_write8(Adapter, MSR, val8); ++ } ++ break; ++ case HW_VAR_MEDIA_STATUS1: ++ { ++ u8 val8; ++ ++ val8 = rtw_read8(Adapter, MSR)&0x03; ++ val8 |= *((u8 *)val) <<2; ++ rtw_write8(Adapter, MSR, val8); ++ } ++ break; ++ case HW_VAR_SET_OPMODE: ++ hw_var_set_opmode(Adapter, variable, val); ++ break; ++ case HW_VAR_MAC_ADDR: ++ hw_var_set_macaddr(Adapter, variable, val); ++ break; ++ case HW_VAR_BSSID: ++ hw_var_set_bssid(Adapter, variable, val); ++ break; ++ case HW_VAR_BASIC_RATE: ++ { ++ u16 BrateCfg = 0; ++ u8 RateIndex = 0; ++ ++ // 2007.01.16, by Emily ++ // Select RRSR (in Legacy-OFDM and CCK) ++ // For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate. ++ // We do not use other rates. ++ HalSetBrateCfg( Adapter, val, &BrateCfg ); ++ ++ //2011.03.30 add by Luke Lee ++ //CCK 2M ACK should be disabled for some BCM and Atheros AP IOT ++ //because CCK 2M has poor TXEVM ++ //CCK 5.5M & 11M ACK should be enabled for better performance ++ ++ pHalData->BasicRateSet = BrateCfg = (BrateCfg |0xd) & 0x15d; ++ ++ BrateCfg |= 0x01; // default enable 1M ACK rate ++ ++ DBG_8192C("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n", BrateCfg); ++ ++ // Set RRSR rate table. ++ rtw_write8(Adapter, REG_RRSR, BrateCfg&0xff); ++ rtw_write8(Adapter, REG_RRSR+1, (BrateCfg>>8)&0xff); ++ rtw_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0); ++ ++ // Set RTS initial rate ++ while(BrateCfg > 0x1) ++ { ++ BrateCfg = (BrateCfg>> 1); ++ RateIndex++; ++ } ++ // Ziv - Check ++ rtw_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex); ++ } ++ break; ++ case HW_VAR_TXPAUSE: ++ rtw_write8(Adapter, REG_TXPAUSE, *((u8 *)val)); ++ break; ++ case HW_VAR_BCN_FUNC: ++ hw_var_set_bcn_func(Adapter, variable, val); ++ break; ++ case HW_VAR_CORRECT_TSF: ++#ifdef CONFIG_CONCURRENT_MODE ++ hw_var_set_correct_tsf(Adapter, variable, val); ++#else ++ { ++ u64 tsf; ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //tsf = pmlmeext->TSFValue - ((u32)pmlmeext->TSFValue % (pmlmeinfo->bcn_interval*1024)) -1024; //us ++ tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) -1024; //us ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //pHalData->RegTxPause |= STOP_BCNQ;BIT(6) ++ //rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)|BIT(6))); ++ StopTxBeacon(Adapter); ++ } ++ ++ //disable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3))); ++ ++ rtw_write32(Adapter, REG_TSFTR, tsf); ++ rtw_write32(Adapter, REG_TSFTR+4, tsf>>32); ++ ++ //enable related TSF function ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3)); ++ ++ ++ if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) ++ { ++ //pHalData->RegTxPause &= (~STOP_BCNQ); ++ //rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)&(~BIT(6)))); ++ ResumeTxBeacon(Adapter); ++ } ++ } ++#endif ++ break; ++ case HW_VAR_CHECK_BSSID: ++ if(*((u8 *)val)) ++ { ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN); ++ } ++ else ++ { ++ u32 val32; ++ ++ val32 = rtw_read32(Adapter, REG_RCR); ++ val32 &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN); ++ rtw_write32(Adapter, REG_RCR, val32); ++ } ++ break; ++ case HW_VAR_MLME_DISCONNECT: ++#ifdef CONFIG_CONCURRENT_MODE ++ hw_var_set_mlme_disconnect(Adapter, variable, val); ++#else ++ { ++ //Set RCR to not to receive data frame when NO LINK state ++ //rtw_write32(Adapter, REG_RCR, rtw_read32(padapter, REG_RCR) & ~RCR_ADF); ++ //reject all data frames ++ rtw_write16(Adapter, REG_RXFLTMAP2,0x00); ++ ++ //reset TSF ++ rtw_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1))); ++ ++ //disable update TSF ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); ++ } ++#endif ++ break; ++ case HW_VAR_MLME_SITESURVEY: ++ hw_var_set_mlme_sitesurvey(Adapter, variable, val); ++ break; ++ case HW_VAR_MLME_JOIN: ++#ifdef CONFIG_CONCURRENT_MODE ++ hw_var_set_mlme_join(Adapter, variable, val); ++#else ++ { ++ u8 RetryLimit = 0x30; ++ u8 type = *((u8 *)val); ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ ++ if(type == 0) // prepare to join ++ { ++ //enable to rx data frame.Accept all data frame ++ //rtw_write32(padapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF); ++ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); ++ ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN); ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ RetryLimit = (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48; ++ } ++ else // Ad-hoc Mode ++ { ++ RetryLimit = 0x7; ++ } ++ } ++ else if(type == 1) //joinbss_event call back when join res < 0 ++ { ++ rtw_write16(Adapter, REG_RXFLTMAP2,0x00); ++ } ++ else if(type == 2) //sta add event call back ++ { ++ //enable update TSF ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE)) ++ { ++ //fixed beacon issue for 8191su........... ++ rtw_write8(Adapter,0x542 ,0x02); ++ RetryLimit = 0x7; ++ } ++ } ++ ++ rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT); ++ } ++#endif ++ break; ++ ++ case HW_VAR_ON_RCR_AM: ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_AM); ++ DBG_871X("%s, %d, RCR= %x \n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR)); ++ break; ++ case HW_VAR_OFF_RCR_AM: ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)& (~RCR_AM)); ++ DBG_871X("%s, %d, RCR= %x \n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR)); ++ break; ++ ++ case HW_VAR_BEACON_INTERVAL: ++ rtw_write16(Adapter, REG_BCN_INTERVAL, *((u16 *)val)); ++ break; ++ case HW_VAR_SLOT_TIME: ++ { ++ u8 u1bAIFS, aSifsTime; ++ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ rtw_write8(Adapter, REG_SLOT, val[0]); ++ ++ if(pmlmeinfo->WMM_enable == 0) ++ { ++ if( pmlmeext->cur_wireless_mode == WIRELESS_11B) ++ aSifsTime = 10; ++ else ++ aSifsTime = 16; ++ ++ u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime); ++ ++ // Temporary removed, 2008.06.20. ++ rtw_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS); ++ rtw_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS); ++ rtw_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS); ++ rtw_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS); ++ } ++ } ++ break; ++ case HW_VAR_RESP_SIFS: ++ { ++#if 0 ++ // SIFS for OFDM Data ACK ++ rtw_write8(Adapter, REG_SIFS_CTX+1, val[0]); ++ // SIFS for OFDM consecutive tx like CTS data! ++ rtw_write8(Adapter, REG_SIFS_TRX+1, val[1]); ++ ++ rtw_write8(Adapter,REG_SPEC_SIFS+1, val[0]); ++ rtw_write8(Adapter,REG_MAC_SPEC_SIFS+1, val[0]); ++ ++ // 20100719 Joseph: Revise SIFS setting due to Hardware register definition change. ++ rtw_write8(Adapter, REG_R2T_SIFS+1, val[0]); //0x08 - CCK ++ rtw_write8(Adapter, REG_T2T_SIFS+1, val[0]); //0x0e - OFDM ++#else ++ //SIFS_Timer = 0x0a0a0808; ++ //RESP_SIFS for CCK ++ rtw_write8(Adapter, REG_R2T_SIFS, val[0]); // SIFS_T2T_CCK (0x08) ++ rtw_write8(Adapter, REG_R2T_SIFS+1, val[1]); //SIFS_R2T_CCK(0x08) ++ //RESP_SIFS for OFDM ++ rtw_write8(Adapter, REG_T2T_SIFS, val[2]); //SIFS_T2T_OFDM (0x0a) ++ rtw_write8(Adapter, REG_T2T_SIFS+1, val[3]); //SIFS_R2T_OFDM(0x0a) ++#endif ++ } ++ break; ++ case HW_VAR_ACK_PREAMBLE: ++ { ++ u8 regTmp; ++ u8 bShortPreamble = *( (PBOOLEAN)val ); ++ // Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) ++ regTmp = (pHalData->nCur40MhzPrimeSC)<<5; ++ //regTmp = 0; ++ if(bShortPreamble) ++ regTmp |= 0x80; ++ ++ rtw_write8(Adapter, REG_RRSR+2, regTmp); ++ } ++ break; ++ case HW_VAR_SEC_CFG: ++#ifdef CONFIG_CONCURRENT_MODE ++ rtw_write8(Adapter, REG_SECCFG, 0x0c|BIT(5));// enable tx enc and rx dec engine, and no key search for MC/BC ++#else ++ rtw_write8(Adapter, REG_SECCFG, *((u8 *)val)); ++#endif ++ break; ++ case HW_VAR_DM_FLAG: ++ pdmpriv->DMFlag = *((u8 *)val); ++ break; ++ case HW_VAR_DM_FUNC_OP: ++ if(val[0]) ++ {// save dm flag ++ pdmpriv->DMFlag_tmp = pdmpriv->DMFlag; ++ } ++ else ++ {// restore dm flag ++ pdmpriv->DMFlag = pdmpriv->DMFlag_tmp; ++ } ++ break; ++ case HW_VAR_DM_FUNC_SET: ++ pdmpriv->DMFlag |= *((u8 *)val); ++ break; ++ case HW_VAR_DM_FUNC_CLR: ++ pdmpriv->DMFlag &= *((u8 *)val); ++ break; ++ case HW_VAR_CAM_EMPTY_ENTRY: ++ { ++ u8 ucIndex = *((u8 *)val); ++ u8 i; ++ u32 ulCommand=0; ++ u32 ulContent=0; ++ u32 ulEncAlgo=CAM_AES; ++ ++ for(i=0;iAcParam_BE = ((u32 *)(val))[0]; ++ rtw_write32(Adapter, REG_EDCA_BE_PARAM, ((u32 *)(val))[0]); ++ break; ++ case HW_VAR_AC_PARAM_BK: ++ rtw_write32(Adapter, REG_EDCA_BK_PARAM, ((u32 *)(val))[0]); ++ break; ++ case HW_VAR_ACM_CTRL: ++ { ++ u8 acm_ctrl = *((u8 *)val); ++ u8 AcmCtrl = rtw_read8( Adapter, REG_ACMHWCTRL); ++ ++ if(acm_ctrl > 1) ++ AcmCtrl = AcmCtrl | 0x1; ++ ++ if(acm_ctrl & BIT(3)) ++ AcmCtrl |= AcmHw_VoqEn; ++ else ++ AcmCtrl &= (~AcmHw_VoqEn); ++ ++ if(acm_ctrl & BIT(2)) ++ AcmCtrl |= AcmHw_ViqEn; ++ else ++ AcmCtrl &= (~AcmHw_ViqEn); ++ ++ if(acm_ctrl & BIT(1)) ++ AcmCtrl |= AcmHw_BeqEn; ++ else ++ AcmCtrl &= (~AcmHw_BeqEn); ++ ++ DBG_871X("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl ); ++ rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl ); ++ } ++ break; ++ case HW_VAR_AMPDU_MIN_SPACE: ++ { ++ u8 MinSpacingToSet; ++ u8 SecMinSpace; ++ ++ MinSpacingToSet = *((u8 *)val); ++ if(MinSpacingToSet <= 7) ++ { ++ switch(Adapter->securitypriv.dot11PrivacyAlgrthm) ++ { ++ case _NO_PRIVACY_: ++ case _AES_: ++ SecMinSpace = 0; ++ break; ++ ++ case _WEP40_: ++ case _WEP104_: ++ case _TKIP_: ++ case _TKIP_WTMIC_: ++ SecMinSpace = 6; ++ break; ++ default: ++ SecMinSpace = 7; ++ break; ++ } ++ ++ if(MinSpacingToSet < SecMinSpace){ ++ MinSpacingToSet = SecMinSpace; ++ } ++ ++ //RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", Adapter->MgntInfo.MinSpaceCfg)); ++ rtw_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet); ++ } ++ } ++ break; ++ case HW_VAR_AMPDU_FACTOR: ++ { ++ u8 RegToSet_Normal[4]={0x41,0xa8,0x72, 0xb9}; ++ u8 RegToSet_BT[4]={0x31,0x74,0x42, 0x97}; ++ u8 FactorToSet; ++ u8 *pRegToSet; ++ u8 index = 0; ++ ++#ifdef CONFIG_BT_COEXIST ++ if( (pHalData->bt_coexist.BT_Coexist) && ++ (pHalData->bt_coexist.BT_CoexistType == BT_CSR_BC4) ) ++ pRegToSet = RegToSet_BT; // 0x97427431; ++ else ++#endif ++ pRegToSet = RegToSet_Normal; // 0xb972a841; ++ ++ FactorToSet = *((u8 *)val); ++ if(FactorToSet <= 3) ++ { ++ FactorToSet = (1<<(FactorToSet + 2)); ++ if(FactorToSet>0xf) ++ FactorToSet = 0xf; ++ ++ for(index=0; index<4; index++) ++ { ++ if((pRegToSet[index] & 0xf0) > (FactorToSet<<4)) ++ pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet<<4); ++ ++ if((pRegToSet[index] & 0x0f) > FactorToSet) ++ pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet); ++ ++ rtw_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]); ++ } ++ ++ //RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_FACTOR: %#x\n", FactorToSet)); ++ } ++ } ++ break; ++ case HW_VAR_RXDMA_AGG_PG_TH: ++ #ifdef CONFIG_USB_RX_AGGREGATION ++ { ++ u8 threshold = *((u8 *)val); ++ if( threshold == 0) ++ { ++ threshold = pHalData->UsbRxAggPageCount; ++ } ++ rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold); ++ } ++ #endif ++ break; ++ case HW_VAR_SET_RPWM: ++ rtw_write8(Adapter, REG_USB_HRPWM, *((u8 *)val)); ++ break; ++ case HW_VAR_H2C_FW_PWRMODE: ++ { ++ u8 psmode = (*(u8 *)val); ++ ++ // Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power ++ // saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. ++ if( (psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(pHalData->VersionID))) ++ { ++ rtl8192c_dm_RF_Saving(Adapter, _TRUE); ++ } ++ rtl8192c_set_FwPwrMode_cmd(Adapter, psmode); ++ } ++ break; ++ case HW_VAR_H2C_FW_JOINBSSRPT: ++ { ++ u8 mstatus = (*(u8 *)val); ++ rtl8192c_set_FwJoinBssReport_cmd(Adapter, mstatus); ++ } ++ break; ++#ifdef CONFIG_P2P_PS ++ case HW_VAR_H2C_FW_P2P_PS_OFFLOAD: ++ { ++ u8 p2p_ps_state = (*(u8 *)val); ++ rtl8192c_set_p2p_ps_offload_cmd(Adapter, p2p_ps_state); ++ } ++ break; ++#endif // CONFIG_P2P_PS ++#ifdef CONFIG_TDLS ++ case HW_VAR_TDLS_WRCR: ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)&(~ BIT(6) )); ++ break; ++ case HW_VAR_TDLS_INIT_CH_SEN: ++ { ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)&(~ BIT(6) )&(~ BIT(7) )); ++ rtw_write16(Adapter, REG_RXFLTMAP2,0xffff); ++ ++ //disable update TSF ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); ++ } ++ break; ++ case HW_VAR_TDLS_DONE_CH_SEN: ++ { ++ //enable update TSF ++ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~ BIT(4))); ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|(BIT(7) )); ++ } ++ break; ++ case HW_VAR_TDLS_RS_RCR: ++ rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|(BIT(6))); ++ break; ++#endif //CONFIG_TDLS ++ case HW_VAR_INITIAL_GAIN: ++ { ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ u32 rx_gain = ((u32 *)(val))[0]; ++ ++ if(rx_gain == 0xff){//restore rx gain ++ pDigTable->CurIGValue = pDigTable->BackupIGValue; ++ PHY_SetBBReg(Adapter, rOFDM0_XAAGCCore1, 0x7f,pDigTable->CurIGValue ); ++ PHY_SetBBReg(Adapter, rOFDM0_XBAGCCore1, 0x7f,pDigTable->CurIGValue); ++ } ++ else{ ++ pDigTable->BackupIGValue = pDigTable->CurIGValue; ++ PHY_SetBBReg(Adapter, rOFDM0_XAAGCCore1, 0x7f,rx_gain ); ++ PHY_SetBBReg(Adapter, rOFDM0_XBAGCCore1, 0x7f,rx_gain); ++ pDigTable->CurIGValue = (u8)rx_gain; ++ } ++ ++ ++ } ++ break; ++ case HW_VAR_TRIGGER_GPIO_0: ++ rtl8192cu_trigger_gpio_0(Adapter); ++ break; ++#ifdef CONFIG_BT_COEXIST ++ case HW_VAR_BT_SET_COEXIST: ++ { ++ u8 bStart = (*(u8 *)val); ++ rtl8192c_set_dm_bt_coexist(Adapter, bStart); ++ } ++ break; ++ case HW_VAR_BT_ISSUE_DELBA: ++ { ++ u8 dir = (*(u8 *)val); ++ rtl8192c_issue_delete_ba(Adapter, dir); ++ } ++ break; ++#endif ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ ++ case HW_VAR_ANTENNA_DIVERSITY_LINK: ++ SwAntDivRestAfterLink8192C(Adapter); ++ break; ++ case HW_VAR_ANTENNA_DIVERSITY_SELECT: ++ { ++ u8 Optimum_antenna = (*(u8 *)val); ++ //switch antenna to Optimum_antenna ++ // DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B"); ++ if(pHalData->CurAntenna != Optimum_antenna) ++ { ++ PHY_SetBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300, Optimum_antenna); ++ pHalData->CurAntenna = Optimum_antenna ; ++ //DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B"); ++ } ++ } ++ break; ++#endif ++ case HW_VAR_EFUSE_BYTES: // To set EFUE total used bytes, added by Roger, 2008.12.22. ++ pHalData->EfuseUsedBytes = *((u16 *)val); ++ break; ++ case HW_VAR_FIFO_CLEARN_UP: ++ { ++ #define RW_RELEASE_EN BIT18 ++ #define RXDMA_IDLE BIT17 ++ ++ struct pwrctrl_priv *pwrpriv = &Adapter->pwrctrlpriv; ++ u8 trycnt = 100; ++ ++ //pause tx ++ rtw_write8(Adapter,REG_TXPAUSE,0xff); ++ ++ //keep sn ++ Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter,REG_NQOS_SEQ); ++ ++ if(pwrpriv->bkeepfwalive != _TRUE) ++ { ++ //RX DMA stop ++ rtw_write32(Adapter,REG_RXPKT_NUM,(rtw_read32(Adapter,REG_RXPKT_NUM)|RW_RELEASE_EN)); ++ do{ ++ if(!(rtw_read32(Adapter,REG_RXPKT_NUM)&RXDMA_IDLE)) ++ break; ++ }while(trycnt--); ++ if(trycnt ==0) ++ DBG_8192C("Stop RX DMA failed...... \n"); ++ ++ //RQPN Load 0 ++ rtw_write16(Adapter,REG_RQPN_NPQ,0x0); ++ rtw_write32(Adapter,REG_RQPN,0x80000000); ++ rtw_mdelay_os(10); ++ } ++ } ++ break; ++ case HW_VAR_WOWLAN: ++#ifdef CONFIG_WOWLAN ++ { ++ struct wowlan_ioctl_param *poidparam; ++ ++ int res; ++ ++ poidparam = (struct wowlan_ioctl_param *)val; ++ switch (poidparam->subcode){ ++ case WOWLAN_PATTERN_MATCH: ++ //Turn on the Pattern Match feature ++ DBG_8192C("\n PATTERN_MATCH poidparam->subcode_value=%d\n",poidparam->subcode_value); ++ if(poidparam->subcode_value==1){ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(1))); ++ Adapter->pwrctrlpriv.wowlan_pattern=_TRUE; ++ DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_pattern=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_pattern); ++ } ++ else{ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(1))); ++ Adapter->pwrctrlpriv.wowlan_pattern=_FALSE; ++ } ++ break; ++ case WOWLAN_MAGIC_PACKET: ++ //Turn on the Magic Packet feature ++ DBG_8192C("\n MAGIC_PACKET poidparam->subcode_value=%d\n",poidparam->subcode_value); ++ if(poidparam->subcode_value==1){ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(2))); ++ Adapter->pwrctrlpriv.wowlan_magic=_TRUE; ++ DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_magic=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_magic); ++ } ++ else{ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(2))); ++ Adapter->pwrctrlpriv.wowlan_magic=_FALSE; ++ } ++ break; ++ case WOWLAN_UNICAST: ++ //Turn on the Unicast wakeup feature ++ if(poidparam->subcode_value==1){ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(3))); ++ Adapter->pwrctrlpriv.wowlan_unicast=_TRUE; ++ } ++ else{ ++ //rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(3))); ++ Adapter->pwrctrlpriv.wowlan_unicast=_FALSE; ++ DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_unicast=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_unicast); ++ } ++ break; ++ case WOWLAN_SET_PATTERN: ++ //Setting the Pattern for wowlan ++ res=rtw_wowlan_set_pattern(Adapter,poidparam->pattern); ++ if(res) ++ DBG_8192C("rtw_wowlan_set_pattern retern value=0x%x",res); ++ break; ++ case WOWLAN_DUMP_REG: ++ //dump the WKFMCAM and WOW_CTRL register ++ /*DBG_8192C("\n\n\n\n rtw_wowlan_ctrl: WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL)); ++ DBG_8192C("print WKFMCAM index =%d ",poidparam->data[0]); ++ { int cmd=0,offset=0; ++ for(offset=0;offset<5;offset++){ ++ cmd=BIT(31)|(poidparam->data[0]+offset); ++ rtw_write32(Adapter, REG_WKFMCAM_CMD, cmd); ++ DBG_8192C("offset[%d]=0x%.8x ",offset,rtw_read32(Adapter, REG_WKFMCAM_RWD)); ++ DBG_8192C("offset[%d]=MSB 0x%x:0x%x:0x%x:0x%x ",offset,rtw_read8(Adapter, REG_WKFMCAM_RWD+3),rtw_read8(Adapter, REG_WKFMCAM_RWD+2),rtw_read8(Adapter, REG_WKFMCAM_RWD+1),rtw_read8(Adapter, REG_WKFMCAM_RWD)); ++ } ++ }*/ ++ ++ break; ++ case WOWLAN_ENABLE: ++ SetFwRelatedForWoWLAN8192CU(Adapter, _TRUE); ++ //Set Pattern ++ if(Adapter->pwrctrlpriv.wowlan_pattern==_TRUE) ++ rtw_wowlan_reload_pattern(Adapter); ++ rtl8192c_set_wowlan_cmd(Adapter); ++ rtw_write8(Adapter, 0x6, rtw_read8(Adapter, 0x6)|BIT(3)); ++ rtw_msleep_os(10); ++ //DBG_8192C(" \n REG_WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL)); ++// if(rtw_read8(Adapter, REG_WOW_CTRL)==0) ++// rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(1)|BIT(2)|BIT(3))); ++ //DBG_8192C(" \n REG_WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL)); ++ break; ++ ++ case WOWLAN_DISABLE: ++ Adapter->pwrctrlpriv.wowlan_mode=_FALSE; ++ rtl8192c_set_wowlan_cmd(Adapter); ++ rtw_msleep_os(10); ++ break; ++ ++ case WOWLAN_STATUS: ++ poidparam->wakeup_reason = rtw_read8(Adapter, REG_WOWLAN_REASON); ++ DBG_8192C("wake on wlan reason 0x%02x\n", poidparam->wakeup_reason); ++ break; ++ ++ default: ++ break; ++ } ++ if (Adapter->pwrctrlpriv.wowlan_unicast||Adapter->pwrctrlpriv.wowlan_magic || Adapter->pwrctrlpriv.wowlan_pattern) ++ Adapter->pwrctrlpriv.wowlan_mode =_TRUE; ++ else ++ Adapter->pwrctrlpriv.wowlan_mode =_FALSE; ++ } ++ ++ break; ++#endif //CONFIG_WOWLAN ++ case HW_VAR_CHECK_TXBUF: ++#ifdef CONFIG_CONCURRENT_MODE ++ { ++ int i; ++ u8 RetryLimit = 0x01; ++ ++ //rtw_write16(Adapter, REG_RL,0x0101); ++ rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT); ++ ++ for(i=0;i<1000;i++) ++ { ++ if(rtw_read32(Adapter, 0x200) != rtw_read32(Adapter, 0x204)) ++ { ++ //DBG_871X("packet in tx packet buffer - 0x204=%x, 0x200=%x (%d)\n", rtw_read32(Adapter, 0x204), rtw_read32(Adapter, 0x200), i); ++ rtw_msleep_os(10); ++ } ++ else ++ { ++ DBG_871X("no packet in tx packet buffer (%d)\n", i); ++ break; ++ } ++ } ++ ++ RetryLimit = 0x30; ++ rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT); ++ ++ } ++#endif ++ break; ++ case HW_VAR_BCN_VALID: ++ //BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw ++ rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0); ++ break; ++ case HW_VAR_USB_RXAGG_PAGE_TO: ++ rtw_write8(Adapter, REG_USB_DMA_AGG_TO, *((u8 *)val)); ++ break; ++ default: ++ break; ++ } ++ ++_func_exit_; ++} ++ ++void GetHwReg8192CU(PADAPTER Adapter, u8 variable, u8* val) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ ++_func_enter_; ++ ++ switch(variable) ++ { ++ case HW_VAR_BASIC_RATE: ++ *((u16 *)(val)) = pHalData->BasicRateSet; ++ case HW_VAR_TXPAUSE: ++ val[0] = rtw_read8(Adapter, REG_TXPAUSE); ++ break; ++ case HW_VAR_BCN_VALID: ++ //BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 ++ val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2))?_TRUE:_FALSE; ++ break; ++ case HW_VAR_DM_FLAG: ++ val[0] = pHalData->dmpriv.DMFlag; ++ break; ++ case HW_VAR_RF_TYPE: ++ val[0] = pHalData->rf_type; ++ break; ++ case HW_VAR_FWLPS_RF_ON: ++ { ++ //When we halt NIC, we should check if FW LPS is leave. ++ u32 valRCR; ++ ++ if(Adapter->pwrctrlpriv.rf_pwrstate == rf_off) ++ { ++ // If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave, ++ // because Fw is unload. ++ val[0] = _TRUE; ++ } ++ else ++ { ++ valRCR = rtw_read32(Adapter, REG_RCR); ++ valRCR &= 0x00070000; ++ if(valRCR) ++ val[0] = _FALSE; ++ else ++ val[0] = _TRUE; ++ } ++ } ++ break; ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ case HW_VAR_CURRENT_ANTENNA: ++ val[0] = pHalData->CurAntenna; ++ break; ++#endif ++ case HW_VAR_EFUSE_BYTES: // To get EFUE total used bytes, added by Roger, 2008.12.22. ++ *((u16 *)(val)) = pHalData->EfuseUsedBytes; ++ break; ++ case HW_VAR_VID: ++ *((u16 *)(val)) = pHalData->EEPROMVID; ++ break; ++ case HW_VAR_PID: ++ *((u16 *)(val)) = pHalData->EEPROMPID; ++ break; ++ default: ++ break; ++ } ++ ++_func_exit_; ++} ++ ++// ++// Description: ++// Query setting of specified variable. ++// ++u8 ++GetHalDefVar8192CUsb( ++ IN PADAPTER Adapter, ++ IN HAL_DEF_VARIABLE eVariable, ++ IN PVOID pValue ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 bResult = _TRUE; ++ ++ switch(eVariable) ++ { ++ case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB: ++#if 0 //trunk ++ { ++ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; ++ struct sta_priv * pstapriv = &Adapter->stapriv; ++ struct sta_info * psta; ++ psta = rtw_get_stainfo(pstapriv, pmlmepriv->cur_network.network.MacAddress); ++ if(psta) ++ { ++ *((int *)pValue) = psta->rssi_stat.UndecoratedSmoothedPWDB; ++ } ++ } ++#else //v4 branch ++ //if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE){ ++ *((int *)pValue) = pHalData->dmpriv.UndecoratedSmoothedPWDB; ++ //} ++ //else{ ++ ++ //} ++#endif ++ break; ++ case HAL_DEF_IS_SUPPORT_ANT_DIV: ++ #ifdef CONFIG_ANTENNA_DIVERSITY ++ *((u8 *)pValue) = (IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0))?_FALSE:_TRUE; ++ #endif ++ break; ++ case HAL_DEF_CURRENT_ANTENNA: ++ #ifdef CONFIG_ANTENNA_DIVERSITY ++ *(( u8*)pValue) = pHalData->CurAntenna; ++ #endif ++ break; ++ case HAL_DEF_DRVINFO_SZ: ++ *(( u32*)pValue) = DRVINFO_SZ; ++ break; ++ case HAL_DEF_MAX_RECVBUF_SZ: ++ *(( u32*)pValue) = MAX_RECVBUF_SZ; ++ break; ++ case HAL_DEF_RX_PACKET_OFFSET: ++ *(( u32*)pValue) = RXDESC_SIZE + DRVINFO_SZ; ++ break; ++ case HAL_DEF_DBG_DUMP_RXPKT: ++ *(( u8*)pValue) = pHalData->bDumpRxPkt; ++ break; ++ case HAL_DEF_DBG_DM_FUNC: ++ *(( u8*)pValue) = pHalData->dmpriv.DMFlag; ++ break; ++ default: ++ //RT_TRACE(COMP_INIT, DBG_WARNING, ("GetHalDefVar8192CUsb(): Unkown variable: %d!\n", eVariable)); ++ bResult = _FALSE; ++ break; ++ } ++ ++ return bResult; ++} ++ ++ ++ ++ ++// ++// Description: ++// Change default setting of specified variable. ++// ++u8 ++SetHalDefVar8192CUsb( ++ IN PADAPTER Adapter, ++ IN HAL_DEF_VARIABLE eVariable, ++ IN PVOID pValue ++ ) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); ++ u8 bResult = _TRUE; ++ ++ switch(eVariable) ++ { ++ case HAL_DEF_DBG_DUMP_RXPKT: ++ pHalData->bDumpRxPkt = *(( u8*)pValue); ++ break; ++ case HAL_DEF_DBG_DM_FUNC: ++ { ++ u8 dm_func = *(( u8*)pValue); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ ++ if(dm_func == 0){ //disable all dynamic func ++ pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE; ++ DBG_8192C("==> Disable all dynamic function...\n"); ++ } ++ else if(dm_func == 1){//disable DIG ++ pdmpriv->DMFlag &= (~DYNAMIC_FUNC_DIG); ++ DBG_8192C("==> Disable DIG...\n"); ++ } ++ else if(dm_func == 2){//disable High power ++ pdmpriv->DMFlag &= (~DYNAMIC_FUNC_HP); ++ } ++ else if(dm_func == 3){//disable tx power tracking ++ pdmpriv->DMFlag &= (~DYNAMIC_FUNC_SS); ++ DBG_8192C("==> Disable tx power tracking...\n"); ++ } ++ else if(dm_func == 4){//disable BT coexistence ++ pdmpriv->DMFlag &= (~DYNAMIC_FUNC_BT); ++ } ++ else if(dm_func == 5){//disable antenna diversity ++ pdmpriv->DMFlag &= (~DYNAMIC_FUNC_ANT_DIV); ++ } ++ else if(dm_func == 6){//turn on all dynamic func ++ if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_DIG)) ++ { ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ DIG_T *pDigTable = &pdmpriv->DM_DigTable; ++ pDigTable->PreIGValue = rtw_read8(Adapter,0xc50); ++ } ++ ++ pdmpriv->DMFlag |= (DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS| ++ DYNAMIC_FUNC_BT|DYNAMIC_FUNC_ANT_DIV) ; ++ DBG_8192C("==> Turn on all dynamic function...\n"); ++ } ++ } ++ break; ++ default: ++ //RT_TRACE(COMP_INIT, DBG_TRACE, ("SetHalDefVar819xUsb(): Unkown variable: %d!\n", eVariable)); ++ bResult = _FALSE; ++ break; ++ } ++ ++ return bResult; ++} ++ ++u32 _update_92cu_basic_rate(_adapter *padapter, unsigned int mask) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++#endif ++ unsigned int BrateCfg = 0; ++ ++#ifdef CONFIG_BT_COEXIST ++ if( (pbtpriv->BT_Coexist) && (pbtpriv->BT_CoexistType == BT_CSR_BC4) ) ++ { ++ BrateCfg = mask & 0x151; ++ //DBG_8192C("BT temp disable cck 2/5.5/11M, (0x%x = 0x%x)\n", REG_RRSR, BrateCfg & 0x151); ++ } ++ else ++#endif ++ { ++ if(pHalData->VersionID != VERSION_TEST_CHIP_88C) ++ BrateCfg = mask & 0x15F; ++ else //for 88CU 46PING setting, Disable CCK 2M, 5.5M, Others must tuning ++ BrateCfg = mask & 0x159; ++ } ++ ++ BrateCfg |= 0x01; // default enable 1M ACK rate ++ ++ return BrateCfg; ++} ++ ++void _update_response_rate(_adapter *padapter,unsigned int mask) ++{ ++ u8 RateIndex = 0; ++ // Set RRSR rate table. ++ rtw_write8(padapter, REG_RRSR, mask&0xff); ++ rtw_write8(padapter,REG_RRSR+1, (mask>>8)&0xff); ++ ++ ++ // Set RTS initial rate ++ while(mask > 0x1) ++ { ++ mask = (mask>> 1); ++ RateIndex++; ++ } ++ rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex); ++} ++ ++void UpdateHalRAMask8192CUsb(PADAPTER padapter, u32 mac_id) ++{ ++ //volatile unsigned int result; ++ u8 init_rate=0; ++ u8 networkType, raid; ++ u32 mask; ++ u8 shortGIrate = _FALSE; ++ int supportRateNum = 0; ++ struct sta_info *psta; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ WLAN_BSSID_EX *cur_network = &(pmlmeinfo->network); ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); ++#endif ++ ++ if (mac_id >= NUM_STA) //CAM_SIZE ++ { ++ return; ++ } ++ ++ psta = pmlmeinfo->FW_sta_info[mac_id].psta; ++ if(psta == NULL) ++ { ++ return; ++ } ++ ++ switch (mac_id) ++ { ++ case 0:// for infra mode ++#ifdef CONFIG_CONCURRENT_MODE ++ case 2:// first station uses macid=0, second station uses macid=2 ++#endif ++ supportRateNum = rtw_get_rateset_len(cur_network->SupportedRates); ++ networkType = judge_network_type(padapter, cur_network->SupportedRates, supportRateNum) & 0xf; ++ //pmlmeext->cur_wireless_mode = networkType; ++ raid = networktype_to_raid(networkType); ++ ++ mask = update_supported_rate(cur_network->SupportedRates, supportRateNum); ++ mask |= (pmlmeinfo->HT_enable)? update_MSC_rate(&(pmlmeinfo->HT_caps)): 0; ++ mask |= ((raid<<28)&0xf0000000); ++ ++ if (support_short_GI(padapter, &(pmlmeinfo->HT_caps))) ++ { ++ shortGIrate = _TRUE; ++ } ++ ++ break; ++ ++ case 1://for broadcast/multicast ++ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates); ++ if(pmlmeext->cur_wireless_mode & WIRELESS_11B) ++ networkType = WIRELESS_11B; ++ else ++ networkType = WIRELESS_11G; ++ raid = networktype_to_raid(networkType); ++ ++ mask = update_basic_rate(cur_network->SupportedRates, supportRateNum); ++ mask |= ((raid<<28)&0xf0000000); ++ ++ break; ++ ++ default: //for each sta in IBSS ++#ifdef CONFIG_TDLS ++ if(psta->tdls_sta_state & TDLS_LINKED_STATE) ++ { ++ shortGIrate = update_sgi_tdls(padapter, psta); ++ mask = update_mask_tdls(padapter, psta); ++ raid = mask>>28; ++ break; ++ } ++ else ++#endif //CONFIG_TDLS ++ { ++ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates); ++ networkType = judge_network_type(padapter, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) & 0xf; ++ //pmlmeext->cur_wireless_mode = networkType; ++ raid = networktype_to_raid(networkType); ++ ++ mask = update_supported_rate(cur_network->SupportedRates, supportRateNum); ++ mask |= ((raid<<28)&0xf0000000); ++ ++ //todo: support HT in IBSS ++ ++ break; ++ } ++ } ++ ++#ifdef CONFIG_BT_COEXIST ++ if( (pbtpriv->BT_Coexist) && ++ (pbtpriv->BT_CoexistType == BT_CSR_BC4) && ++ (pbtpriv->BT_CUR_State) && ++ (pbtpriv->BT_Ant_isolation) && ++ ((pbtpriv->BT_Service==BT_SCO)|| ++ (pbtpriv->BT_Service==BT_Busy)) ) ++ mask &= 0xffffcfc0; ++ else ++#endif ++ mask &=0xffffffff; ++ ++ ++ init_rate = get_highest_rate_idx(mask)&0x3f; ++ ++ if(pHalData->fw_ractrl == _TRUE) ++ { ++ u8 arg = 0; ++ ++ //arg = (cam_idx-4)&0x1f;//MACID ++ arg = mac_id&0x1f;//MACID ++ ++ arg |= BIT(7); ++ ++ if (shortGIrate==_TRUE) ++ arg |= BIT(5); ++ ++ DBG_871X("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg); ++ psta->ra_mask=mask; ++#ifdef CONFIG_INTEL_PROXIM ++ if(padapter->proximity.proxim_on ==_TRUE){ ++ arg &= ~BIT(6); ++ } ++ else { ++ arg |= BIT(6); ++ } ++#endif //CONFIG_INTEL_PROXIM ++ rtl8192c_set_raid_cmd(padapter, mask, arg); ++ ++ } ++ else ++ { ++ if (shortGIrate==_TRUE) ++ init_rate |= BIT(6); ++ ++ rtw_write8(padapter, (REG_INIDATA_RATE_SEL+mac_id), init_rate); ++ } ++ ++ ++ //set ra_id ++ psta->raid = raid; ++ psta->init_rate = init_rate; ++ ++ //set correct initial date rate for each mac_id ++ pdmpriv->INIDATA_RATE[mac_id] = init_rate; ++} ++ ++void SetBeaconRelatedRegisters8192CUsb(PADAPTER padapter) ++{ ++ u32 value32; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ //reset TSF, enable update TSF, correcting TSF On Beacon ++ ++ //REG_BCN_INTERVAL ++ //REG_BCNDMATIM ++ //REG_ATIMWND ++ //REG_TBTT_PROHIBIT ++ //REG_DRVERLYINT ++ //REG_BCN_MAX_ERR ++ //REG_BCNTCFG //(0x510) ++ //REG_DUAL_TSF_RST ++ //REG_BCN_CTRL //(0x550) ++ ++ //BCN interval ++ rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval); ++ rtw_write8(padapter, REG_ATIMWND, 0x02);// 2ms ++ ++ _InitBeaconParameters(padapter); ++ ++ rtw_write8(padapter, REG_SLOT, 0x09); ++ ++ value32 =rtw_read32(padapter, REG_TCR); ++ value32 &= ~TSFRST; ++ rtw_write32(padapter, REG_TCR, value32); ++ ++ value32 |= TSFRST; ++ rtw_write32(padapter, REG_TCR, value32); ++ ++ // NOTE: Fix test chip's bug (about contention windows's randomness) ++ rtw_write8(padapter, REG_RXTSF_OFFSET_CCK, 0x50); ++ rtw_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50); ++ ++ _BeaconFunctionEnable(padapter, _TRUE, _TRUE); ++ ++ ResumeTxBeacon(padapter); ++ ++ //rtw_write8(padapter, 0x422, rtw_read8(padapter, 0x422)|BIT(6)); ++ ++ //rtw_write8(padapter, 0x541, 0xff); ++ ++ //rtw_write8(padapter, 0x542, rtw_read8(padapter, 0x541)|BIT(0)); ++ ++ rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(1)); ++ ++} ++ ++static void rtl8192cu_init_default_value(_adapter * padapter) ++{ ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ struct dm_priv *pdmpriv = &pHalData->dmpriv; ++ u8 i; ++ ++ //init default value ++ pHalData->fw_ractrl = _FALSE; ++ pHalData->bIQKInitialized = _FALSE; ++ if(!pwrctrlpriv->bkeepfwalive) ++ pHalData->LastHMEBoxNum = 0; ++ ++ pHalData->bIQKInitialized = _FALSE; ++ //init dm default value ++ pdmpriv->TM_Trigger = 0; ++ pdmpriv->binitialized = _FALSE; ++ pdmpriv->prv_traffic_idx = 3; ++ pdmpriv->initialize = 0; ++ ++ pdmpriv->ThermalValue_HP_index = 0; ++ for(i = 0; i < HP_THERMAL_NUM; i++) ++ pdmpriv->ThermalValue_HP[i] = 0; ++} ++ ++static u8 rtl8192cu_ps_func(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8 *val) ++{ ++ u8 bResult = _TRUE; ++ switch(efunc_id){ ++ ++ #if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED) ++ case HAL_USB_SELECT_SUSPEND: ++ { ++ u8 bfwpoll = *(( u8*)val); ++ rtl8192c_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500);//note fw to support hw power down ping detect ++ } ++ break; ++ #endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED ++ ++ default: ++ break; ++ } ++ return bResult; ++} ++ ++void rtl8192cu_set_hal_ops(_adapter * padapter) ++{ ++ struct hal_ops *pHalFunc = &padapter->HalFunc; ++ ++_func_enter_; ++ ++ padapter->HalData = rtw_zmalloc(sizeof(HAL_DATA_TYPE)); ++ if(padapter->HalData == NULL){ ++ DBG_8192C("cant not alloc memory for HAL DATA \n"); ++ } ++ //_rtw_memset(padapter->HalData, 0, sizeof(HAL_DATA_TYPE)); ++ padapter->hal_data_sz = sizeof(HAL_DATA_TYPE); ++ ++ pHalFunc->hal_init = &rtl8192cu_hal_init; ++ pHalFunc->hal_deinit = &rtl8192cu_hal_deinit; ++ ++ //pHalFunc->free_hal_data = &rtl8192c_free_hal_data; ++ ++ pHalFunc->inirp_init = &rtl8192cu_inirp_init; ++ pHalFunc->inirp_deinit = &rtl8192cu_inirp_deinit; ++ ++ pHalFunc->init_xmit_priv = &rtl8192cu_init_xmit_priv; ++ pHalFunc->free_xmit_priv = &rtl8192cu_free_xmit_priv; ++ ++ pHalFunc->init_recv_priv = &rtl8192cu_init_recv_priv; ++ pHalFunc->free_recv_priv = &rtl8192cu_free_recv_priv; ++#ifdef CONFIG_SW_LED ++ pHalFunc->InitSwLeds = &rtl8192cu_InitSwLeds; ++ pHalFunc->DeInitSwLeds = &rtl8192cu_DeInitSwLeds; ++#else //case of hw led or no led ++ pHalFunc->InitSwLeds = NULL; ++ pHalFunc->DeInitSwLeds = NULL; ++#endif//CONFIG_SW_LED ++ ++ //pHalFunc->dm_init = &rtl8192c_init_dm_priv; ++ //pHalFunc->dm_deinit = &rtl8192c_deinit_dm_priv; ++ ++ pHalFunc->init_default_value = &rtl8192cu_init_default_value; ++ pHalFunc->intf_chip_configure = &rtl8192cu_interface_configure; ++ pHalFunc->read_adapter_info = &ReadAdapterInfo8192CU; ++ ++ //pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C; ++ //pHalFunc->set_channel_handler = &PHY_SwChnl8192C; ++ ++ //pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog; ++ ++ pHalFunc->SetHwRegHandler = &SetHwReg8192CU; ++ pHalFunc->GetHwRegHandler = &GetHwReg8192CU; ++ pHalFunc->GetHalDefVarHandler = &GetHalDefVar8192CUsb; ++ pHalFunc->SetHalDefVarHandler = &SetHalDefVar8192CUsb; ++ ++ pHalFunc->UpdateRAMaskHandler = &UpdateHalRAMask8192CUsb; ++ pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8192CUsb; ++ ++ //pHalFunc->Add_RateATid = &rtl8192c_Add_RateATid; ++ ++//#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ //pHalFunc->AntDivBeforeLinkHandler = &SwAntDivBeforeLink8192C; ++ //pHalFunc->AntDivCompareHandler = &SwAntDivCompare8192C; ++//#endif ++ ++ pHalFunc->hal_xmit = &rtl8192cu_hal_xmit; ++ pHalFunc->mgnt_xmit = &rtl8192cu_mgnt_xmit; ++ pHalFunc->hal_xmitframe_enqueue = &rtl8192cu_hal_xmitframe_enqueue; ++ ++ //pHalFunc->read_bbreg = &rtl8192c_PHY_QueryBBReg; ++ //pHalFunc->write_bbreg = &rtl8192c_PHY_SetBBReg; ++ //pHalFunc->read_rfreg = &rtl8192c_PHY_QueryRFReg; ++ //pHalFunc->write_rfreg = &rtl8192c_PHY_SetRFReg; ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ pHalFunc->hostap_mgnt_xmit_entry = &rtl8192cu_hostap_mgnt_xmit_entry; ++#endif ++ pHalFunc->interface_ps_func = &rtl8192cu_ps_func; ++ ++ rtl8192c_set_hal_ops(pHalFunc); ++_func_exit_; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c +new file mode 100644 +index 000000000000..26148fcc5370 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c +@@ -0,0 +1,1205 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_OPS_OS_C_ ++ ++#include ++#include ++#include ++#include ++ ++#ifndef PLATFORM_OS_CE ++ #error "PLATFORM_OS_CE shall be set \n" ++#endif ++ ++#ifndef CONFIG_USB_HCI ++ #error "CONFIG_USB_HCI shall be on!\n" ++#endif ++ ++#include ++#include ++ ++#include ++ ++ ++struct zero_bulkout_context ++{ ++ void *pbuf; ++ void *purb; ++ void *pirp; ++ void *padapter; ++}; ++ ++ ++ ++#define PUSB_ERROR LPDWORD ++#define USBD_HALTED(Status) ((ULONG)(Status) >> 30 == 3) ++ ++ ++USB_PIPE ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr); ++ ++ ++static NTSTATUS usb_async_interrupt_in_complete( LPVOID Context ); ++static NTSTATUS usb_async_interrupt_out_complete( LPVOID Context ); ++ ++DWORD usb_write_port_complete( LPVOID Context ); ++DWORD usb_read_port_complete( LPVOID Context ); ++ ++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++_func_exit_; ++} ++ ++ ++ ++BOOL ++CloseTransferHandle( ++ LPCUSB_FUNCS pUsbFuncs, ++ USB_TRANSFER hTransfer ++ ) ++{ ++ BOOL bRc = TRUE; ++ ++ // This assert may fail on suprise remove, ++ // but should pass during normal I/O. ++ // ASSERT( pUsbFuncs->lpIsTransferComplete(hTransfer) ); ++ ++ // CloseTransfer aborts any pending transfers ++ if ( !pUsbFuncs->lpCloseTransfer(hTransfer) ) { ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("*** CloseTransfer ERROR:%d ***\n", GetLastError())); ++ bRc = FALSE; ++ } ++ ++ return bRc; ++} ++ ++ ++BOOL ++GetTransferStatus( ++ LPCUSB_FUNCS pUsbFuncs, ++ USB_TRANSFER hTransfer, ++ LPDWORD pBytesTransferred , // OPTIONAL returns number of bytes transferred ++ PUSB_ERROR pUsbError // returns USB error code ++ ) ++{ ++ ++ BOOL bRc = TRUE; ++ ++ if ( pUsbFuncs->lpGetTransferStatus(hTransfer, pBytesTransferred, pUsbError) ) { ++ if ( USB_NO_ERROR != *pUsbError ) { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("*** CloseTransfer ERROR:%d ***\n", GetLastError())); ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("GetTransferStatus (BytesTransferred:%d, UsbError:0x%x)\n", pBytesTransferred?*pBytesTransferred:-1, pUsbError?*pUsbError:-1 )); ++ } ++ } else { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_,("*** GetTransferStatus ERROR:%d ***\n", GetLastError())); ++ *pUsbError = USB_CANCELED_ERROR; ++ bRc = FALSE; ++ } ++ ++ return bRc; ++} ++ ++ ++// The driver should never read RxCmd register. We have to set ++// RCR CMDHAT0 (bit6) to append Rx status before the Rx frame. ++// ++// |<-------- pBulkUrb->TransferBufferLength ------------>| ++// +------------------+-------------------+------------+ ++// | Rx status (16 bytes) | Rx frame ..... | CRC(4 bytes) | ++// +------------------+-------------------+------------+ ++// ^ ++// ^pRfd->Buffer.VirtualAddress ++// ++/*! \brief USB RX IRP Complete Routine. ++ @param Context pointer of RT_RFD ++*/ ++u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ struct intf_priv *pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv *pdvobj_priv = (struct dvobj_priv*)pintfpriv->intf_dev; ++ _adapter *adapter = (_adapter *)pdvobj_priv->padapter; ++ ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ ++ struct recv_buf *precvbuf = (struct recv_buf *)rmem; ++ DWORD dwErr = ERROR_SUCCESS ; ++ DWORD dwBytesTransferred = 0 ; ++ USB_TRANSFER hTransfer = NULL; ++ USB_PIPE hPipe; ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port(%u)\n", __LINE__)); ++ ++#if (CONFIG_PWRCTRL == 1) ++ if (adapter->pwrctrlpriv.pnp_bstop_trx) ++ { ++ return _FALSE; ++ } ++#endif ++ ++ if(adapter->bDriverStopped || adapter->bSurpriseRemoved) ++ { ++ RT_TRACE(_module_hci_ops_os_c_, _drv_info_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved)!!!\n")); ++ return _FALSE; ++ } ++ ++ if(precvbuf !=NULL) ++ { ++ ++ // get a recv buffer ++ rtl8192cu_init_recvbuf(adapter, precvbuf); ++ ++ ++ ++ _rtw_spinlock(&precvpriv->lock); ++ precvpriv->rx_pending_cnt++; ++ precvbuf->irp_pending = _TRUE; ++ _rtw_spinunlock(&precvpriv->lock); ++ ++ ++ //translate DMA FIFO addr to pipehandle ++ hPipe = ffaddr2pipehdl(pdvobj_priv, addr); ++ ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port(%u)\n", __LINE__)); ++ ++ precvbuf->usb_transfer_read_port = (*usb_funcs_vp->lpIssueBulkTransfer)( ++ hPipe, ++ usb_read_port_complete, ++ precvbuf, ++ USB_IN_TRANSFER|USB_SHORT_TRANSFER_OK, ++ MAX_RECVBUF_SZ, ++ precvbuf->pbuf, ++ 0); ++ ++ ++ if(precvbuf->usb_transfer_read_port) ++ { ++ ++ // GetTransferStatus(usb_funcs_vp, hTransfer, &dwBytesTransferred,&UsbRc); ++ ++ // CloseTransferHandle(usb_funcs_vp, hTransfer); ++ ++ } ++ else ++ { ++ ++ dwErr = GetLastError(); ++ //RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port ERROR : %d\n", dwErr)); ++ ++ } ++ ++// if ( USB_NO_ERROR != UsbRc && ERROR_SUCCESS == dwErr) { ++// dwErr = ERROR_GEN_FAILURE; ++// } ++ ++ ++ if ( ERROR_SUCCESS != dwErr ) { ++ ++ SetLastError(dwErr); ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port ERROR : %d\n", dwErr)); ++ } ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_read_port(%u)\n", __LINE__)); ++ ++ } ++ else // if(precvbuf !=NULL) ++ { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precv_frame ==NULL\n")); ++ } ++ ++ return _TRUE; ++ ++} ++ ++DWORD usb_read_port_complete( PVOID context ) ++{ ++ struct recv_buf *precvbuf = (struct recv_buf *)context; ++ _adapter *adapter = (_adapter *)precvbuf->adapter; ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ ++ ++ struct intf_hdl *pintfhdl = &adapter->pio_queue->intf; ++ struct intf_priv *pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv *pdvobj_priv = (struct dvobj_priv*)pintfpriv->intf_dev; ++ ++ ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++ DWORD dwBytesTransferred = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++ uint isevt, *pbuf; ++ int fComplete =_FALSE; ++ ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port_complete(%u)\n", __LINE__)); ++ ++_func_enter_; ++ ++ ++ _rtw_spinlock_ex(&precvpriv->lock); ++ precvbuf->irp_pending=_FALSE; ++ precvpriv->rx_pending_cnt --; ++ _rtw_spinunlock_ex(&precvpriv->lock); ++ ++ ++#if 1 ++ ++ (*usb_funcs_vp->lpGetTransferStatus)(precvbuf->usb_transfer_read_port, &dwBytesTransferred, &dwErr); ++ fComplete = (*usb_funcs_vp->lpIsTransferComplete)(precvbuf->usb_transfer_read_port); ++ if(fComplete!=_TRUE) ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete CloseTransfer before complete\n")); ++ } ++ (*usb_funcs_vp->lpCloseTransfer)(precvbuf->usb_transfer_read_port); ++ ++ ++#endif ++ ++ ++ if(USB_NO_ERROR != dwErr) ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete Fail :%d\n",dwErr)); ++ ++ { ++ ++ if ( dwBytesTransferred > MAX_RECVBUF_SZ || dwBytesTransferred < RXDESC_SIZE ) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_, ++ ("\n usb_read_port_complete: (pbulkurb->TransferBufferLength > MAX_RECVBUF_SZ) || (pbulkurb->TransferBufferLength < RXDESC_SIZE): %d\n",dwBytesTransferred)); ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ ++ //usb_read_port(pintfhdl, 0, 0, (unsigned char *)precvframe); ++ } ++ else ++ { ++ precvbuf->transfer_len = dwBytesTransferred; ++ ++ pbuf = (uint*)precvbuf->pbuf; ++ ++ if((isevt = *(pbuf+1)&0x1ff) == 0x1ff) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_, ++ ("\n usb_read_port_complete: get a event\n")); ++ rxcmd_event_hdl(adapter, pbuf);//rx c2h events ++ ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ else ++ { ++ if(recvbuf2recvframe(adapter, precvbuf)==_FAIL)//rx packets ++ { ++ //precvbuf->reuse = _TRUE; ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ } ++ } ++ } ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_read_port_complete(%u)\n", __LINE__)); ++ ++_func_exit_; ++ return ERROR_SUCCESS; ++// return STATUS_MORE_PROCESSING_REQUIRED; ++} ++ ++void usb_read_port_cancel(_adapter *padapter){ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port_cancel(%u)\n",__FUNCTION__, __LINE__)); ++} ++ ++DWORD usb_write_mem_complete( LPVOID Context ) ++{ ++ int fComplete =_FALSE; ++ DWORD dwBytes = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++ _irqL irqL; ++ _list *head; ++ _list *plist; ++ struct io_req *pio_req; ++ struct io_queue *pio_q = (struct io_queue *) Context; ++ struct intf_hdl *pintf = &(pio_q->intf); ++ struct intf_priv *pintfpriv = pintf->pintfpriv; ++ _adapter *padapter = (_adapter *)pintf->adapter; ++ NTSTATUS status = STATUS_SUCCESS; ++ struct xmit_priv * pxmitpriv = &padapter->xmitpriv; ++ ++ struct dvobj_priv * pdvobj_priv = (struct dvobj_priv*)pintfpriv->intf_dev; ++ ++ USB_HANDLE usbHandle = pdvobj_priv->usb_extension._hDevice; ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++ // get the head from the processing io_queue ++ head = &(pio_q->processing); ++ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("+usb_write_mem_complete %p\n", Context)); ++ ++#if 1 ++ _enter_critical_bh(&(pio_q->lock), &irqL); ++ ++ ++ //free irp in processing list... ++ while(rtw_is_list_empty(head) != _TRUE) ++ { ++ plist = get_next(head); ++ rtw_list_delete(plist); ++ pio_req = LIST_CONTAINOR(plist, struct io_req, list); ++ _rtw_up_sema(&pio_req->sema); ++ } ++ ++ _exit_critical_bh(&(pio_q->lock), &irqL); ++#endif ++ ++ ++#if 1 ++ ++ (*usb_funcs_vp->lpGetTransferStatus)(pio_req->usb_transfer_write_mem , &dwBytes, &dwErr); ++ fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pio_req->usb_transfer_write_mem); ++ if(fComplete!=_TRUE) ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_mem_complete CloseTransfer before complete\n")); ++ } ++ (*usb_funcs_vp->lpCloseTransfer)(pio_req->usb_transfer_write_mem ); ++ ++#endif ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_write_mem_complete\n")); ++ ++_func_exit_; ++ ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ ++} ++ ++ ++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ ++ NTSTATUS NtStatus = STATUS_SUCCESS; ++ USB_PIPE hPipe; ++ _irqL irqL; ++ ++ int fComplete = _FALSE; ++ DWORD dwBytes = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++ ++ struct io_req *pio_req; ++ ++ _adapter *adapter = (_adapter *)pintfhdl->adapter; ++ struct intf_priv *pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv * pdvobj_priv = (struct dvobj_priv*)pintfpriv->intf_dev; ++ ++ ++ struct xmit_priv *pxmitpriv = &adapter->xmitpriv; ++ struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_mem(%u) pintfhdl %p wmem %p\n", __LINE__, pintfhdl, wmem)); ++ ++ // fetch a io_request from the io_queue ++ pio_req = alloc_ioreq(pio_queue); ++ ++ if ((pio_req == NULL)||(adapter->bSurpriseRemoved)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("async_irp_write32 : pio_req =0x%x adapter->bSurpriseRemoved=0x%x",pio_req,adapter->bSurpriseRemoved )); ++ goto exit; ++ } ++ ++ _enter_critical_bh(&(pio_queue->lock), &irqL); ++ ++ ++ // insert the io_request into processing io_queue ++ rtw_list_insert_tail(&(pio_req->list),&(pio_queue->processing)); ++ ++ ++ if((adapter->bDriverStopped) || (adapter->bSurpriseRemoved) ||(adapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n")); ++ goto exit; ++ } ++ ++ //translate DMA FIFO addr to pipehandle ++ hPipe = ffaddr2pipehdl(pdvobj_priv, addr); ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_,("usb_write_mem(%u)\n",__LINE__)); ++ ++ pio_req->usb_transfer_write_mem = (*usb_funcs_vp->lpIssueBulkTransfer)( ++ hPipe, ++ usb_write_mem_complete, ++ pio_queue, ++ USB_OUT_TRANSFER, ++ cnt, ++ wmem, ++ 0); ++ ++#if 0 ++ ++ (*usb_funcs_vp->lpGetTransferStatus)(pio_req->usb_transfer_write_mem , &dwBytes, &dwErr); ++ ++ while( fComplete != _TRUE) ++ { ++ fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pio_req->usb_transfer_write_mem); ++ if(fComplete==_TRUE) ++ { ++ (*usb_funcs_vp->lpCloseTransfer)(pio_req->usb_transfer_write_mem ); ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_mem finished\n")); ++ break; ++ } ++ else ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ++ ("usb_write_mem not yet finished %X\n", ++ pio_req->usb_transfer_write_mem)); ++ rtw_msleep_os(10); ++ } ++ ++ } ++ ++#endif ++ ++ ++// _rtw_down_sema(&pio_req->sema); ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_write_mem(%X)\n",pio_req->usb_transfer_write_mem)); ++ ++ _exit_critical_bh(&(pio_queue->lock), &irqL); ++ ++ _rtw_down_sema(&pio_req->sema); ++ free_ioreq(pio_req, pio_queue); ++ ++exit: ++_func_exit_; ++ return; ++} ++ ++u32 usb_write_cnt=0; ++u32 usb_complete_cnt=0; ++ ++USB_PIPE ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr) ++{ ++ USB_PIPE PipeHandle = NULL; ++ _adapter *padapter = pNdisCEDvice->padapter; ++ ++ ++ if(pNdisCEDvice->nr_endpoint == 11) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3] ; ++ break; ++ case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[4]; ++ break; ++ case RTL8712_DMA_VIQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_BCNQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[6]; ++ break; ++ case RTL8712_DMA_BMCQ: //HI Queue ++ PipeHandle= padapter->halpriv.pipehdls_r8712[7]; ++ break; ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[8]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[5]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[9]; ++ break; ++ ++ } ++ ++ } ++ else if(pNdisCEDvice->nr_endpoint == 6) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3]; ++ break; ++ case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[4]; ++ break; ++ case RTL8712_DMA_VIQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ case RTL8712_DMA_BCNQ: ++ case RTL8712_DMA_BMCQ: ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[5]; ++ break; ++ ++ } ++ ++ } ++ else if(pNdisCEDvice->nr_endpoint == 4) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ case RTL8712_DMA_VIQ: ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ case RTL8712_DMA_BCNQ: ++ case RTL8712_DMA_BMCQ: ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3]; ++ break; ++ } ++ ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ffaddr2pipehdl():nr_endpoint=%d error!\n", pNdisCEDvice->nr_endpoint)); ++ } ++ ++ return PipeHandle; ++ ++} ++ ++DWORD usb_bulkout_zero_complete( LPVOID pZeroContext ) ++{ ++ struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)pZeroContext; ++ _adapter * padapter = pcontext->padapter; ++ struct dvobj_priv * pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv; ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ struct xmit_priv * pxmitpriv = &padapter->xmitpriv; ++ ++ int fComplete =_FALSE; ++ DWORD dwBytesTransferred = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++_func_enter_; ++ ++#if 1 ++ ++ (*usb_funcs_vp->lpGetTransferStatus)(pxmitpriv->usb_transfer_write_port, &dwBytesTransferred, &dwErr); ++ fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port); ++ if(fComplete!=_TRUE) ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_bulkout_zero_complete CloseTransfer before complete\n")); ++ } ++ (*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port); ++ ++#endif ++ ++ if(pcontext) ++ { ++ if(pcontext->pbuf) ++ { ++ rtw_mfree(pcontext->pbuf, sizeof(int)); ++ } ++ ++ rtw_mfree((u8*)pcontext, sizeof(struct zero_bulkout_context)); ++ } ++ ++_func_exit_; ++ ++ return ERROR_SUCCESS; ++ ++ ++} ++ ++u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ struct zero_bulkout_context *pcontext; ++ unsigned char *pbuf; ++ u8 len = 0 ; ++ _adapter *padapter = (_adapter *)pintfhdl->adapter; ++ struct dvobj_priv *pdvobj = (struct dvobj_priv *)&padapter->dvobjpriv; ++ struct xmit_priv * pxmitpriv = &padapter->xmitpriv; ++ ++ ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj->usb_extension._lpUsbFuncs; ++ ++ USB_PIPE hPipe; ++ ++_func_enter_; ++ ++ if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ return _FAIL; ++ } ++ ++ ++ pcontext = (struct zero_bulkout_context *)rtw_zmalloc(sizeof(struct zero_bulkout_context)); ++ ++ pbuf = (unsigned char *)rtw_zmalloc(sizeof(int)); ++ ++ len = 0; ++ ++ pcontext->pbuf = pbuf; ++ pcontext->purb = NULL; ++ pcontext->pirp = NULL; ++ pcontext->padapter = padapter; ++ ++ ++//translate DMA FIFO addr to pipehandle ++ hPipe = ffaddr2pipehdl(pdvobj, addr); ++ ++ ++ ++ ++ pxmitpriv->usb_transfer_write_port = (*usb_funcs_vp->lpIssueBulkTransfer)( ++ hPipe, usb_bulkout_zero_complete, ++ pcontext, USB_OUT_TRANSFER, ++ len, pbuf, 0); ++ ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ ++ u32 i, bwritezero = _FALSE; ++ u32 ac_tag = addr; ++ ++ u8* ptr; ++ ++ struct intf_priv * pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv * pdvobj_priv = (struct dvobj_priv*)pintfpriv->intf_dev; ++ _adapter * padapter = pdvobj_priv->padapter; ++ ++ struct xmit_priv * pxmitpriv = &padapter->xmitpriv; ++ struct xmit_frame * pxmitframe = (struct xmit_frame *)wmem; ++ ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++ USB_PIPE hPipe; ++ ++ u32 bResult = _FALSE; ++ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("+usb_write_port\n")); ++ ++#if (CONFIG_PWRCTRL == 1) ++ if(padapter->pwrctrlpriv.pnp_bstop_trx==_TRUE){ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n")); ++ ++ } ++#endif ++ ++ if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ bResult = _FALSE; ++ goto exit; ++ } ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_port(%u)\n", __LINE__)); ++ ++ for(i=0; i<8; i++) ++ { ++ if(pxmitframe->bpending[i] == _FALSE) ++ { ++ _rtw_spinlock(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt++; ++ pxmitframe->bpending[i] = _TRUE; ++ _rtw_spinunlock(&pxmitpriv->lock); ++ ++ pxmitframe->sz[i] = cnt; ++ pxmitframe->ac_tag[i] = ac_tag; ++ ++ break; ++ } ++ } ++ ++ ++ //TODO: ++ if (pdvobj_priv->ishighspeed) ++ { ++ if(cnt> 0 && cnt%512 == 0) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ishighspeed, cnt=%d\n", cnt)); ++ // cnt=cnt+1; ++ bwritezero = _TRUE; ++ ++ } ++ } ++ else ++ { ++ if(cnt > 0 && cnt%64 == 0) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("cnt=%d\n", cnt)); ++ // cnt=cnt+1; ++ bwritezero = _TRUE; ++ ++ } ++ } ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_port: pipe handle convert\n")); ++ ++ //translate DMA FIFO addr to pipehandle ++ hPipe = ffaddr2pipehdl(pdvobj_priv, addr); ++ ++ ++#if 0 ++ // for tx fifo, the maximum payload number is 8, ++ // we workaround this issue here by separate whole fifo into 8 segments. ++ if (cnt <= 500) ++ cnt = 500; ++#endif ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ++ ("usb_write_port(%u): pxmitframe %X pxmitframe->padapter %X\n",__LINE__, pxmitframe, pxmitframe->padapter)); ++ ++ pxmitpriv->usb_transfer_write_port = (*usb_funcs_vp->lpIssueBulkTransfer)( ++ hPipe, usb_write_port_complete, ++ pxmitframe, USB_OUT_TRANSFER, ++ cnt, pxmitframe->mem_addr, 0); ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ ++ ptr=(u8 *)&pxmitframe->mem; ++ ++#if 0 ++ if (pdvobj_priv->ishighspeed) ++ { ++ ptr=ptr+512; ++ } ++ else ++ { ++ ptr=ptr+64; ++ ++ } ++#endif ++ if(bwritezero == _TRUE) ++ { ++ usb_bulkout_zero(pintfhdl, addr); ++ } ++ ++// if (!pxmitframe->usb_transfer_xmit) ++// padapter->bSurpriseRemoved=_TRUE; ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ bResult = _SUCCESS; ++ ++exit: ++_func_exit_; ++ return bResult; ++} ++ ++DWORD usb_write_port_complete( LPVOID Context ) ++{ ++ ++// u8 *ptr; ++ ++ struct xmit_frame * pxmitframe = (struct xmit_frame *) Context; ++ _adapter * padapter = pxmitframe->padapter; ++ struct dvobj_priv * pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv; ++ struct xmit_priv * pxmitpriv = &padapter->xmitpriv; ++ struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; ++ LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs; ++ ++ int fComplete =_FALSE; ++ DWORD dwBytesTransferred = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u), pxmitframe %X\n",__FUNCTION__, __LINE__, Context)); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("+usb_write_port_complete\n")); ++ ++ _rtw_spinlock_ex(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt--; ++ _rtw_spinunlock_ex(&pxmitpriv->lock); ++ ++ if(pxmitpriv->txirp_cnt==0){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n")); ++ _rtw_up_sema(&(pxmitpriv->tx_retevt)); ++ } ++ ++ ++ //not to consider tx fragment ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ ++#if 1 ++ ++ (*usb_funcs_vp->lpGetTransferStatus)(pxmitpriv->usb_transfer_write_port, &dwBytesTransferred, &dwErr); ++ fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port); ++ if(fComplete!=_TRUE) ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_port_complete CloseTransfer before complete\n")); ++ } ++ (*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port); ++ ++#else ++ ++ if((*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port)) ++ { ++ (*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port); ++ } ++ ++#endif ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ++ ("%s(%u): pxmitpriv %X pxmitpriv->free_xmitframe_cnt %X pxmitframe->padapter %X pxmitframe->padapter %X\n", ++ __LINE__, pxmitpriv, pxmitpriv->free_xmitframe_cnt, pxmitframe->padapter)); ++ ++ rtl8192cu_xmitframe_complete(padapter, pxmitpriv, pxmitbuf); ++ ++_func_exit_; ++ ++ return STATUS_SUCCESS; ++} ++ ++DWORD usb_write_scsi_complete(LPVOID pTxContext) ++{ ++#ifndef PLATFORM_OS_CE ++ struct SCSI_BUFFER_ENTRY *psb_entry = (struct SCSI_BUFFER_ENTRY *)pTxContext; ++ _adapter *padapter = psb_entry->padapter; ++ struct SCSI_BUFFER *psb = padapter->pscsi_buf; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct dvobj_priv *pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv; ++ LPCUSB_FUNCS lpUsbFuncs = pdvobj_priv->pUsbExtension->_lpUsbFuncs; ++ ++ int fComplete =_FALSE; ++ DWORD dwBytesTransferred = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ ++_func_enter_; ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u): circ_space = %d\n",__FUNCTION__, __LINE__, CIRC_SPACE( psb->head,psb->tail, SCSI_BUFFER_NUMBER))); ++ ++#if 1 ++ ++ (*lpUsbFuncs->lpGetTransferStatus)(psb_entry->usb_transfer_scsi_txcmd, &dwBytesTransferred, &dwErr); ++ fComplete = (*lpUsbFuncs->lpIsTransferComplete)(psb_entry->usb_transfer_scsi_txcmd); ++ if(fComplete!=_TRUE) ++ { ++ RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_scsi_complete CloseTransfer before complete\n")); ++ } ++ (*lpUsbFuncs->lpCloseTransfer)(psb_entry->usb_transfer_scsi_txcmd); ++ ++#else ++ ++ if((*lpUsbFuncs->lpIsTransferComplete)(psb_entry->usb_transfer_scsi_txcmd)) ++ (*lpUsbFuncs->lpCloseTransfer)(psb_entry->usb_transfer_scsi_txcmd); ++#endif ++ ++ memset(psb_entry->entry_memory, 0, 8); ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ if((psb->tail+1)==SCSI_BUFFER_NUMBER) ++ psb->tail=0; ++ else ++ psb->tail++; ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ if(CIRC_CNT(psb->head,psb->tail,SCSI_BUFFER_NUMBER)==0){ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("write_txcmd_scsififo_callback: up_sema\n")); ++ _rtw_up_sema(&pxmitpriv->xmit_sema); ++ } ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ if(padapter->bSurpriseRemoved) { ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ } ++ ++_func_exit_; ++#endif ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ return STATUS_MORE_PROCESSING_REQUIRED; ++} ++ ++uint usb_write_scsi(struct intf_hdl *pintfhdl, u32 cnt, u8 *wmem) ++{ ++ ++#ifndef PLATFORM_OS_CE ++ ++ _adapter *padapter = (_adapter *)pintfhdl->adapter; ++ struct dvobj_priv *pdev = (struct dvobj_priv*)&padapter->dvobjpriv; ++ ++ struct SCSI_BUFFER *psb =padapter->pscsi_buf; ++ struct SCSI_BUFFER_ENTRY *psb_entry=LIST_CONTAINOR(wmem,struct SCSI_BUFFER_ENTRY,entry_memory); ++ ++_func_enter_; ++ if(padapter->bSurpriseRemoved||padapter->bDriverStopped) ++ return 0; ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ psb_entry->usb_transfer_scsi_txcmd=pdev->pUsbExtension->_lpUsbFuncs->lpIssueBulkTransfer( ++ pdev->scsi_out_pipehandle, ++ usb_write_scsi_complete, ++ psb_entry, ++ USB_OUT_TRANSFER, ++ cnt, ++ wmem, ++ 0); ++ ++_func_exit_; ++#endif ++ ++ return _SUCCESS; ++} ++ ++ ++/* ++ */ ++uint usb_init_intf_priv(struct intf_priv *pintfpriv) ++{ ++ // get the dvobj_priv object ++ struct dvobj_priv * pNdisCEDvice = (struct dvobj_priv *) pintfpriv->intf_dev; ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++ // set init intf_priv init status as _IOREADY ++ pintfpriv->intf_status = _IOREADY; ++ ++ // determine the max io size by dvobj_priv.ishighspeed ++ if(pNdisCEDvice->ishighspeed) ++ pintfpriv->max_iosz = 128; ++ else ++ pintfpriv->max_iosz = 64; ++ ++ // read/write size set as 0 ++ pintfpriv->io_wsz = 0; ++ pintfpriv->io_rsz = 0; ++ ++ // init io_rwmem buffer ++ pintfpriv->allocated_io_rwmem = rtw_zmalloc(pintfpriv->max_iosz +4); ++ if (pintfpriv->allocated_io_rwmem == NULL) ++ { ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz +4); ++ return _FAIL; ++ } ++ else ++ { ++ // word align the io_rwmem ++ pintfpriv->io_rwmem = pintfpriv->allocated_io_rwmem + 4 - ( (u32)(pintfpriv->allocated_io_rwmem) & 3); ++ } ++ ++#ifndef PLATFORM_OS_CE ++ ++ // init io_r_mem buffer ++ pintfpriv->allocated_io_r_mem = rtw_zmalloc(pintfpriv->max_iosz +4); ++ if (pintfpriv->allocated_io_r_mem == NULL) ++ { ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_r_mem), pintfpriv->max_iosz +4); ++ return _FAIL; ++ } ++ else ++ { ++ // word align the io_rwmem ++ pintfpriv->io_r_mem = pintfpriv->allocated_io_r_mem + 4 - ( (u32)(pintfpriv->allocated_io_r_mem) & 3); ++ } ++#endif ++ ++ return _SUCCESS; ++} ++ ++void usb_unload_intf_priv(struct intf_priv *pintfpriv) ++{ ++#ifndef PLATFORM_OS_CE ++ ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz+4); ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_r_mem), pintfpriv->max_iosz+4); ++#endif ++ ++ RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__)); ++} ++ ++ ++ ++void usb_write_port_cancel(_adapter *padapter) ++{ ++ ++ sint i,j; ++ struct dvobj_priv *pdev = &padapter->dvobjpriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ struct xmit_frame *pxmitframe; ++ ++ _rtw_spinlock(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt--; //decrease 1 for Initialize ++ ++ _rtw_spinunlock(&pxmitpriv->lock); ++ ++ if (pxmitpriv->txirp_cnt) ++ { ++ // Canceling Pending Recv Irp ++ pxmitframe= (struct xmit_frame *)pxmitpriv->pxmit_frame_buf; ++ ++ for( i = 0; i < NR_XMITFRAME; i++ ) ++ { ++ for(j=0;j<8;j++) ++ { ++ if (pxmitframe->bpending[j]==_TRUE) ++ { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usb_write_port_cancel() :IoCancelIrp\n")); ++ ++ } ++ } ++ ++ pxmitframe++; ++ } ++ ++ _rtw_down_sema(&(pxmitpriv->tx_retevt)); ++ ++ } ++ ++} ++ ++DWORD usbctrl_vendorreq_complete(LPVOID lpvNotifyParameter) ++{ ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv*)lpvNotifyParameter; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("+usbctrl_vendorreq_complete\n")); ++ ++ return STATUS_SUCCESS; ++} ++ ++ ++int usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype) ++{ ++ u8 ret=_TRUE; ++// NTSTATUS ntstatus; ++// int fComplete; ++// LPCUSB_DEVICE lpDeviceInfo; ++ ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)pintfpriv->intf_dev; ++ ++ USB_TRANSFER usbTrans; ++ USB_DEVICE_REQUEST usb_device_req; ++ USB_HANDLE usbHandle = pdvobjpriv->usb_extension._hDevice; ++ LPCUSB_FUNCS usbFuncs = pdvobjpriv->usb_extension._lpUsbFuncs; ++ ++ u32 transfer_flags = 0; ++ ++ _func_enter_; ++ ++ memset( &usb_device_req, 0, sizeof( USB_DEVICE_REQUEST ) ); ++ ++ if( 0x01 == requesttype ) ++ { ++ usb_device_req.bmRequestType = USB_REQUEST_DEVICE_TO_HOST | USB_REQUEST_VENDOR | USB_REQUEST_FOR_DEVICE; ++ } ++ else ++ { ++ usb_device_req.bmRequestType = USB_REQUEST_HOST_TO_DEVICE | USB_REQUEST_VENDOR | USB_REQUEST_FOR_DEVICE; ++ } ++ ++ usb_device_req.bRequest = request; ++ usb_device_req.wValue = value; ++ usb_device_req.wIndex = index; ++ usb_device_req.wLength = len; ++ ++ if (requesttype == 0x01) ++ { ++ transfer_flags = USB_IN_TRANSFER;//read_in ++ } ++ else ++ { ++ transfer_flags= USB_OUT_TRANSFER;//write_out ++ } ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("+usbctrl_vendorreq\n",__FUNCTION__,__LINE__)); ++ ++#if 0 ++ // Remember to add callback for sync ++ usbTrans = (*usbFuncs->lpIssueVendorTransfer)(usbHandle, ++ usbctrl_vendorreq_complete, pdvobjpriv, ++ transfer_flags, &usb_device_req, pdata, 0); ++#else ++ // Remember to add callback for sync ++ usbTrans = (*usbFuncs->lpIssueVendorTransfer)(usbHandle, ++ NULL, 0, ++ transfer_flags, &usb_device_req, pdata, 0); ++#endif ++ ++// rtw_usleep_os(10); ++ ++ if ( usbTrans ) ++ { ++ DWORD dwBytes = 0; ++ DWORD dwErr = USB_CANCELED_ERROR; ++ int fComplete; ++ ++ (*usbFuncs->lpGetTransferStatus)(usbTrans, &dwBytes, &dwErr); ++ ++ fComplete = (*usbFuncs->lpIsTransferComplete)(usbTrans); ++ ++ if (fComplete== _TRUE) ++ { ++ (*usbFuncs->lpCloseTransfer)(usbTrans); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("usbctrl_vendorreq lpCloseTransfer\n")); ++ } ++ ++ if ( dwErr != USB_NO_ERROR || fComplete != _TRUE) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq lpCloseTransfer without complete\n")); ++ ret = _FALSE; ++ goto exit; ++ } ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq without usbTrans\n")); ++ ret = _FALSE; ++ goto exit; ++ ++ } ++ ++exit: ++ RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("-usbctrl_vendorreq\n")); ++_func_exit_; ++ ++ return ret; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c +new file mode 100644 +index 000000000000..7167c2679955 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c +@@ -0,0 +1,1535 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_OPS_OS_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype) ++{ ++ _adapter *padapter = pintfhdl->padapter; ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct usb_device *udev = pdvobjpriv->pusbdev; ++ ++ unsigned int pipe; ++ int status = 0; ++ u32 tmp_buflen=0; ++ u8 reqtype; ++ u8 *pIo_buf; ++ int vendorreq_times = 0; ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE ++ u8 *tmp_buf; ++ #else // use stack memory ++ u8 tmp_buf[MAX_USB_IO_CTL_SIZE]; ++ #endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->adapter_type > PRIMARY_ADAPTER) ++ { ++ padapter = padapter->pbuddy_adapter; ++ pdvobjpriv = adapter_to_dvobj(padapter); ++ udev = pdvobjpriv->pusbdev; ++ } ++#endif ++ ++ ++ //DBG_871X("%s %s:%d\n",__FUNCTION__, current->comm, current->pid); ++ ++ if((padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq:(padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ status = -EPERM; ++ goto exit; ++ } ++ ++ if(len>MAX_VENDOR_REQ_CMD_SIZE){ ++ DBG_8192C( "[%s] Buffer len error ,vendor request failed\n", __FUNCTION__ ); ++ status = -EINVAL; ++ goto exit; ++ } ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_MUTEX ++ _enter_critical_mutex(&pdvobjpriv->usb_vendor_req_mutex, NULL); ++ #endif ++ ++ ++ // Acquire IO memory for vendorreq ++#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC ++ pIo_buf = pdvobjpriv->usb_vendor_req_buf; ++#else ++ #ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE ++ tmp_buf = rtw_malloc( (u32) len + ALIGNMENT_UNIT); ++ tmp_buflen = (u32)len + ALIGNMENT_UNIT; ++ #else // use stack memory ++ tmp_buflen = MAX_USB_IO_CTL_SIZE; ++ #endif ++ ++ // Added by Albert 2010/02/09 ++ // For mstar platform, mstar suggests the address for USB IO should be 16 bytes alignment. ++ // Trying to fix it here. ++ pIo_buf = (tmp_buf==NULL)?NULL:tmp_buf + ALIGNMENT_UNIT -((SIZE_PTR)(tmp_buf) & 0x0f ); ++#endif ++ ++ if ( pIo_buf== NULL) { ++ DBG_8192C( "[%s] pIo_buf == NULL \n", __FUNCTION__ ); ++ status = -ENOMEM; ++ goto release_mutex; ++ } ++ ++ while(++vendorreq_times<= MAX_USBCTRL_VENDORREQ_TIMES) ++ { ++ _rtw_memset(pIo_buf, 0, len); ++ ++ if (requesttype == 0x01) ++ { ++ pipe = usb_rcvctrlpipe(udev, 0);//read_in ++ reqtype = REALTEK_USB_VENQT_READ; ++ } ++ else ++ { ++ pipe = usb_sndctrlpipe(udev, 0);//write_out ++ reqtype = REALTEK_USB_VENQT_WRITE; ++ _rtw_memcpy( pIo_buf, pdata, len); ++ } ++ ++ #if 0 ++ //timeout test for firmware downloading ++ status = rtw_usb_control_msg(udev, pipe, request, reqtype, value, index, pIo_buf, len ++ , ((value >= FW_8192C_START_ADDRESS && value <= FW_8192C_END_ADDRESS) ||value!=0x1000) ?RTW_USB_CONTROL_MSG_TIMEOUT : RTW_USB_CONTROL_MSG_TIMEOUT_TEST ++ ); ++ #else ++ status = rtw_usb_control_msg(udev, pipe, request, reqtype, value, index, pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT); ++ #endif ++ ++ if ( status == len) // Success this control transfer. ++ { ++ rtw_reset_continual_urb_error(pdvobjpriv); ++ if ( requesttype == 0x01 ) ++ { // For Control read transfer, we have to copy the read data from pIo_buf to pdata. ++ _rtw_memcpy( pdata, pIo_buf, len ); ++ } ++ } ++ else { // error cases ++ DBG_8192C("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n" ++ , value,(requesttype == 0x01)?"read":"write" , len, status, *(u32*)pdata, vendorreq_times); ++ ++ if (status < 0) { ++ if(status == (-ESHUTDOWN) || status == -ENODEV ) ++ { ++ padapter->bSurpriseRemoved = _TRUE; ++ } else { ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ { ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.Wifi_Error_Status = USB_VEN_REQ_CMD_FAIL; ++ } ++ #endif ++ } ++ } ++ else // status != len && status >= 0 ++ { ++ if(status > 0) { ++ if ( requesttype == 0x01 ) ++ { // For Control read transfer, we have to copy the read data from pIo_buf to pdata. ++ _rtw_memcpy( pdata, pIo_buf, len ); ++ } ++ } ++ } ++ ++ if(rtw_inc_and_chk_continual_urb_error(pdvobjpriv) == _TRUE ){ ++ padapter->bSurpriseRemoved = _TRUE; ++ break; ++ } ++ ++ } ++ ++ // firmware download is checksumed, don't retry ++ if( (value >= FW_8192C_START_ADDRESS && value <= FW_8192C_END_ADDRESS) || status == len ) ++ break; ++ ++ } ++ ++ // release IO memory used by vendorreq ++ #ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE ++ rtw_mfree(tmp_buf, tmp_buflen); ++ #endif ++ ++release_mutex: ++ #ifdef CONFIG_USB_VENDOR_REQ_MUTEX ++ _exit_critical_mutex(&pdvobjpriv->usb_vendor_req_mutex, NULL); ++ #endif ++exit: ++ return status; ++ ++} ++ ++static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data=0; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x01;//read_in ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 1; ++ ++ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return (u8)(le32_to_cpu(data)&0x0ff); ++ ++} ++ ++static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data=0; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x01;//read_in ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 2; ++ ++ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return (u16)(le32_to_cpu(data)&0xffff); ++ ++} ++ ++static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data=0; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x01;//read_in ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 4; ++ ++ usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return le32_to_cpu(data); ++ ++} ++ ++static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data; ++ int ret; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x00;//write_out ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 1; ++ ++ data = val; ++ data = cpu_to_le32(data&0x000000ff); ++ ++ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data; ++ int ret; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x00;//write_out ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 2; ++ ++ data = val; ++ data = cpu_to_le32(data&0x0000ffff); ++ ++ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u32 data; ++ int ret; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x00;//write_out ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = 4; ++ data = cpu_to_le32(val); ++ ++ ++ ret =usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype); ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ u16 len; ++ u8 buf[VENDOR_CMD_MAX_DATA_LEN]={0}; ++ int ret; ++ ++ _func_enter_; ++ ++ request = 0x05; ++ requesttype = 0x00;//write_out ++ index = 0;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ len = length; ++ _rtw_memcpy(buf, pdata, len ); ++ ++ ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, buf, len, requesttype); ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++static void usb_read_interrupt_complete(struct urb *purb, struct pt_regs *regs) ++{ ++ int err; ++ _adapter *padapter = (_adapter *)purb->context; ++ ++ if(purb->status==0)//SUCCESS ++ { ++ if (purb->actual_length > sizeof(INTERRUPT_MSG_FORMAT_EX)) ++ { ++ DBG_8192C("usb_read_interrupt_complete: purb->actual_length > sizeof(INTERRUPT_MSG_FORMAT_EX) \n"); ++ } ++ ++ err = usb_submit_urb(purb, GFP_ATOMIC); ++ if((err) && (err != (-EPERM))) ++ { ++ DBG_8192C("cannot submit interrupt in-token(err = 0x%08x),urb_status = %d\n",err, purb->status); ++ } ++ } ++ else ++ { ++ DBG_8192C("###=> usb_read_interrupt_complete => urb status(%d)\n", purb->status); ++ ++ switch(purb->status) { ++ case -EINVAL: ++ case -EPIPE: ++ case -ENODEV: ++ case -ESHUTDOWN: ++ //padapter->bSurpriseRemoved=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n")); ++ case -ENOENT: ++ padapter->bDriverStopped=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n")); ++ break; ++ case -EPROTO: ++ break; ++ case -EINPROGRESS: ++ DBG_8192C("ERROR: URB IS IN PROGRESS!/n"); ++ break; ++ default: ++ break; ++ } ++ } ++ ++} ++ ++static u32 usb_read_interrupt(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ int err; ++ unsigned int pipe; ++ u32 ret = _SUCCESS; ++ _adapter *adapter = pintfhdl->padapter; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(adapter); ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ ++_func_enter_; ++ ++ //translate DMA FIFO addr to pipehandle ++ pipe = ffaddr2pipehdl(pdvobj, addr); ++ ++ usb_fill_int_urb(precvpriv->int_in_urb, pusbd, pipe, ++ precvpriv->int_in_buf, ++ sizeof(INTERRUPT_MSG_FORMAT_EX), ++ usb_read_interrupt_complete, ++ adapter, ++ 1); ++ ++ err = usb_submit_urb(precvpriv->int_in_urb, GFP_ATOMIC); ++ if((err) && (err != (-EPERM))) ++ { ++ DBG_8192C("cannot submit interrupt in-token(err = 0x%08x),urb_status = %d\n",err, precvpriv->int_in_urb->status); ++ ret = _FAIL; ++ } ++ ++_func_exit_; ++ ++ return ret; ++} ++#endif ++ ++static s32 pre_recv_entry(union recv_frame *precvframe, struct recv_stat *prxstat, struct phy_stat *pphy_info) ++{ ++ s32 ret=_SUCCESS; ++#ifdef CONFIG_CONCURRENT_MODE ++ u8 *primary_myid, *secondary_myid, *paddr1; ++ union recv_frame *precvframe_if2 = NULL; ++ _adapter *primary_padapter = precvframe->u.hdr.adapter; ++ _adapter *secondary_padapter = primary_padapter->pbuddy_adapter; ++ struct recv_priv *precvpriv = &primary_padapter->recvpriv; ++ _queue *pfree_recv_queue = &precvpriv->free_recv_queue; ++ u8 *pbuf = precvframe->u.hdr.rx_data; ++ ++ if(!secondary_padapter) ++ return ret; ++ ++ paddr1 = GetAddr1Ptr(precvframe->u.hdr.rx_data); ++ ++ if(IS_MCAST(paddr1) == _FALSE)//unicast packets ++ { ++ //primary_myid = myid(&primary_padapter->eeprompriv); ++ secondary_myid = myid(&secondary_padapter->eeprompriv); ++ ++ if(_rtw_memcmp(paddr1, secondary_myid, ETH_ALEN)) ++ { ++ //change to secondary interface ++ precvframe->u.hdr.adapter = secondary_padapter; ++ } ++ ++ //ret = recv_entry(precvframe); ++ ++ } ++ else // Handle BC/MC Packets ++ { ++ ++ u8 clone = _TRUE; ++#if 0 ++ u8 type, subtype, *paddr2, *paddr3; ++ ++ type = GetFrameType(pbuf); ++ subtype = GetFrameSubType(pbuf); //bit(7)~bit(2) ++ ++ switch (type) ++ { ++ case WIFI_MGT_TYPE: //Handle BC/MC mgnt Packets ++ if(subtype == WIFI_BEACON) ++ { ++ paddr3 = GetAddr3Ptr(precvframe->u.hdr.rx_data); ++ ++ if (check_fwstate(&secondary_padapter->mlmepriv, _FW_LINKED) && ++ _rtw_memcmp(paddr3, get_bssid(&secondary_padapter->mlmepriv), ETH_ALEN)) ++ { ++ //change to secondary interface ++ precvframe->u.hdr.adapter = secondary_padapter; ++ clone = _FALSE; ++ } ++ ++ if(check_fwstate(&primary_padapter->mlmepriv, _FW_LINKED) && ++ _rtw_memcmp(paddr3, get_bssid(&primary_padapter->mlmepriv), ETH_ALEN)) ++ { ++ if(clone==_FALSE) ++ { ++ clone = _TRUE; ++ } ++ else ++ { ++ clone = _FALSE; ++ } ++ ++ precvframe->u.hdr.adapter = primary_padapter; ++ } ++ ++ if(check_fwstate(&primary_padapter->mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) || ++ check_fwstate(&secondary_padapter->mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)) ++ { ++ clone = _TRUE; ++ precvframe->u.hdr.adapter = primary_padapter; ++ } ++ ++ } ++ else if(subtype == WIFI_PROBEREQ) ++ { ++ //probe req frame is only for interface2 ++ //change to secondary interface ++ precvframe->u.hdr.adapter = secondary_padapter; ++ clone = _FALSE; ++ } ++ break; ++ case WIFI_CTRL_TYPE: // Handle BC/MC ctrl Packets ++ ++ break; ++ case WIFI_DATA_TYPE: //Handle BC/MC data Packets ++ //Notes: AP MODE never rx BC/MC data packets ++ ++ paddr2 = GetAddr2Ptr(precvframe->u.hdr.rx_data); ++ ++ if(_rtw_memcmp(paddr2, get_bssid(&secondary_padapter->mlmepriv), ETH_ALEN)) ++ { ++ //change to secondary interface ++ precvframe->u.hdr.adapter = secondary_padapter; ++ clone = _FALSE; ++ } ++ ++ break; ++ default: ++ ++ break; ++ } ++#endif ++ ++ if(_TRUE == clone) ++ { ++ //clone/copy to if2 ++ u8 shift_sz = 0; ++ u32 alloc_sz, skb_len; ++ _pkt *pkt_copy = NULL; ++ struct rx_pkt_attrib *pattrib = NULL; ++ ++ precvframe_if2 = rtw_alloc_recvframe(pfree_recv_queue); ++ if(precvframe_if2) ++ { ++ precvframe_if2->u.hdr.adapter = secondary_padapter; ++ ++ _rtw_init_listhead(&precvframe_if2->u.hdr.list); ++ precvframe_if2->u.hdr.precvbuf = NULL; //can't access the precvbuf for new arch. ++ precvframe_if2->u.hdr.len=0; ++ ++ _rtw_memcpy(&precvframe_if2->u.hdr.attrib, &precvframe->u.hdr.attrib, sizeof(struct rx_pkt_attrib)); ++ ++ pattrib = &precvframe_if2->u.hdr.attrib; ++ ++ // Modified by Albert 20101213 ++ // For 8 bytes IP header alignment. ++ if (pattrib->qos) // Qos data, wireless lan header length is 26 ++ { ++ shift_sz = 6; ++ } ++ else ++ { ++ shift_sz = 0; ++ } ++ ++ skb_len = pattrib->pkt_len; ++ ++ // for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet. ++ // modify alloc_sz for recvive crc error packet by thomas 2011-06-02 ++ if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){ ++ //alloc_sz = 1664; //1664 is 128 alignment. ++ if(skb_len <= 1650) ++ alloc_sz = 1664; ++ else ++ alloc_sz = skb_len + 14; ++ } ++ else { ++ alloc_sz = skb_len; ++ // 6 is for IP header 8 bytes alignment in QoS packet case. ++ // 8 is for skb->data 4 bytes alignment. ++ alloc_sz += 14; ++ } ++ ++ pkt_copy = rtw_skb_alloc(alloc_sz); ++ ++ if(pkt_copy) ++ { ++ pkt_copy->dev = secondary_padapter->pnetdev; ++ precvframe_if2->u.hdr.pkt = pkt_copy; ++ precvframe_if2->u.hdr.rx_head = pkt_copy->data; ++ precvframe_if2->u.hdr.rx_end = pkt_copy->data + alloc_sz; ++ skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address ++ skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz. ++ _rtw_memcpy(pkt_copy->data, pbuf, skb_len); ++ precvframe_if2->u.hdr.rx_data = precvframe_if2->u.hdr.rx_tail = pkt_copy->data; ++ ++ ++ recvframe_put(precvframe_if2, skb_len); ++ //recvframe_pull(precvframe_if2, drvinfo_sz + RXDESC_SIZE); ++ ++ rtl8192c_translate_rx_signal_stuff(precvframe_if2, pphy_info); ++ ++ ret = rtw_recv_entry(precvframe_if2); ++ ++ } else { ++ rtw_free_recvframe(precvframe_if2, pfree_recv_queue); ++ DBG_8192C("%s()-%d: alloc_skb() failed!\n", __FUNCTION__, __LINE__); ++ } ++ ++ } ++ ++ } ++ ++ } ++ ++ rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info); ++ ++ ret = rtw_recv_entry(precvframe); ++ ++#endif ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++static int recvbuf2recvframe(_adapter *padapter, struct recv_buf *precvbuf) ++{ ++ u8 *pbuf; ++ u8 shift_sz = 0; ++ u16 pkt_cnt, drvinfo_sz; ++ u32 pkt_offset, skb_len, alloc_sz; ++ s32 transfer_len; ++ struct recv_stat *prxstat; ++ struct phy_stat *pphy_info = NULL; ++ _pkt *pkt_copy = NULL; ++ union recv_frame *precvframe = NULL; ++ struct rx_pkt_attrib *pattrib = NULL; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &precvpriv->free_recv_queue; ++ ++ ++ transfer_len = (s32)precvbuf->transfer_len; ++ pbuf = precvbuf->pbuf; ++ ++ prxstat = (struct recv_stat *)pbuf; ++ pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff; ++ ++#if 0 //temp remove when disable usb rx aggregation ++ if((pkt_cnt > 10) || (pkt_cnt < 1) || (transfer_lenrxdw0, prxstat->rxdw1, prxstat->rxdw2, prxstat->rxdw4)); ++ ++ prxstat = (struct recv_stat *)pbuf; ++ ++ precvframe = rtw_alloc_recvframe(pfree_recv_queue); ++ if(precvframe==NULL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: precvframe==NULL\n")); ++ DBG_8192C("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__, __LINE__); ++ goto _exit_recvbuf2recvframe; ++ } ++ ++ _rtw_init_listhead(&precvframe->u.hdr.list); ++ precvframe->u.hdr.precvbuf = NULL; //can't access the precvbuf for new arch. ++ precvframe->u.hdr.len=0; ++ ++ rtl8192c_query_rx_desc_status(precvframe, prxstat); ++ ++ pattrib = &precvframe->u.hdr.attrib; ++ if(pattrib->physt) ++ { ++ pphy_info = (struct phy_stat *)(pbuf + RXDESC_OFFSET); ++ } ++ ++ pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len; ++ ++ if((pattrib->pkt_len<=0) || (pkt_offset>transfer_len)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("recvbuf2recvframe: pkt_len<=0\n")); ++ DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__); ++ rtw_free_recvframe(precvframe, pfree_recv_queue); ++ goto _exit_recvbuf2recvframe; ++ } ++ ++ // Modified by Albert 20101213 ++ // For 8 bytes IP header alignment. ++ if (pattrib->qos) // Qos data, wireless lan header length is 26 ++ { ++ shift_sz = 6; ++ } ++ else ++ { ++ shift_sz = 0; ++ } ++ ++ skb_len = pattrib->pkt_len; ++ ++ // for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet. ++ // modify alloc_sz for recvive crc error packet by thomas 2011-06-02 ++ if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){ ++ //alloc_sz = 1664; //1664 is 128 alignment. ++ if(skb_len <= 1650) ++ alloc_sz = 1664; ++ else ++ alloc_sz = skb_len + 14; ++ } ++ else { ++ alloc_sz = skb_len; ++ // 6 is for IP header 8 bytes alignment in QoS packet case. ++ // 8 is for skb->data 4 bytes alignment. ++ alloc_sz += 14; ++ } ++ ++ pkt_copy = rtw_skb_alloc(alloc_sz); ++ ++ if(pkt_copy) ++ { ++ pkt_copy->dev = padapter->pnetdev; ++ precvframe->u.hdr.pkt = pkt_copy; ++ precvframe->u.hdr.rx_head = pkt_copy->data; ++ precvframe->u.hdr.rx_end = pkt_copy->data + alloc_sz; ++ skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address ++ skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz. ++ _rtw_memcpy(pkt_copy->data, (pbuf + pattrib->shift_sz + pattrib->drvinfo_sz + RXDESC_SIZE), skb_len); ++ precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data; ++ } ++ else ++ { ++ DBG_8192C("recvbuf2recvframe:can not allocate memory for skb copy\n"); ++ //precvframe->u.hdr.pkt = rtw_skb_clone(pskb); ++ //precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pbuf; ++ //precvframe->u.hdr.rx_end = pbuf + (pkt_offset>1612?pkt_offset:1612); ++ ++ precvframe->u.hdr.pkt = NULL; ++ rtw_free_recvframe(precvframe, pfree_recv_queue); ++ ++ goto _exit_recvbuf2recvframe; ++ } ++ ++ recvframe_put(precvframe, skb_len); ++ //recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE); ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ switch(pHalData->UsbRxAggMode) ++ { ++ case USB_RX_AGG_DMA: ++ case USB_RX_AGG_MIX: ++ pkt_offset = (u16)_RND128(pkt_offset); ++ break; ++ case USB_RX_AGG_USB: ++ pkt_offset = (u16)_RND4(pkt_offset); ++ break; ++ case USB_RX_AGG_DISABLE: ++ default: ++ break; ++ } ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(rtw_buddy_adapter_up(padapter)) ++ { ++ if(pre_recv_entry(precvframe, prxstat, pphy_info) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n")); ++ } ++ } ++ else ++ { ++ rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info); ++ if(rtw_recv_entry(precvframe) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n")); ++ } ++ } ++ ++#else ++ rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info); ++ if(rtw_recv_entry(precvframe) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n")); ++ } ++#endif ++ ++ pkt_cnt--; ++ transfer_len -= pkt_offset; ++ pbuf += pkt_offset; ++ precvframe = NULL; ++ pkt_copy = NULL; ++ ++ if(transfer_len>0 && pkt_cnt==0) ++ pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff; ++ ++ }while((transfer_len>0) && (pkt_cnt>0)); ++ ++_exit_recvbuf2recvframe: ++ ++ return _SUCCESS; ++} ++ ++void rtl8192cu_recv_tasklet(void *priv) ++{ ++ struct recv_buf *precvbuf = NULL; ++ _adapter *padapter = (_adapter*)priv; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ while (NULL != (precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue))) ++ { ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE)) ++ { ++ DBG_8192C("recv_tasklet => bDriverStopped or bSurpriseRemoved \n"); ++ ++ break; ++ } ++ ++ ++ recvbuf2recvframe(padapter, precvbuf); ++ ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ ++} ++ ++static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs) ++{ ++ struct recv_buf *precvbuf = (struct recv_buf *)purb->context; ++ _adapter *padapter =(_adapter *)precvbuf->adapter; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n")); ++ ++ precvpriv->rx_pending_cnt --; ++ ++ if(padapter->bSurpriseRemoved || padapter->bDriverStopped||padapter->bReadPortCancel) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ ++ goto exit; ++ } ++ ++ if(purb->status==0)//SUCCESS ++ { ++ if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: (purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)\n")); ++ ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ else ++ { ++ rtw_reset_continual_urb_error(adapter_to_dvobj(padapter)); ++ ++ precvbuf->transfer_len = purb->actual_length; ++ ++ //rtw_enqueue_rx_transfer_buffer(precvpriv, rx_transfer_buf); ++ rtw_enqueue_recvbuf(precvbuf, &precvpriv->recv_buf_pending_queue); ++ ++ tasklet_schedule(&precvpriv->recv_tasklet); ++ } ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete : purb->status(%d) != 0 \n", purb->status)); ++ ++ DBG_8192C("###=> usb_read_port_complete => urb status(%d)\n", purb->status); ++ ++ if(rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(padapter)) == _TRUE ){ ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ ++ switch(purb->status) { ++ case -EINVAL: ++ case -EPIPE: ++ case -ENODEV: ++ case -ESHUTDOWN: ++ //padapter->bSurpriseRemoved=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n")); ++ case -ENOENT: ++ padapter->bDriverStopped=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n")); ++ break; ++ case -EPROTO: ++ case -EILSEQ: ++ case -ETIME: ++ case -ECOMM: ++ case -EOVERFLOW: ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ { ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.Wifi_Error_Status = USB_READ_PORT_FAIL; ++ } ++ #endif ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ break; ++ case -EINPROGRESS: ++ DBG_8192C("ERROR: URB IS IN PROGRESS!/n"); ++ break; ++ default: ++ break; ++ } ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ int err; ++ unsigned int pipe; ++ u32 ret = _SUCCESS; ++ PURB purb = NULL; ++ struct recv_buf *precvbuf = (struct recv_buf *)rmem; ++ _adapter *adapter = pintfhdl->padapter; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(adapter); ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ ++_func_enter_; ++ ++ if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ return _FAIL; ++ } ++ ++ if(precvbuf !=NULL) ++ { ++ rtl8192cu_init_recvbuf(adapter, precvbuf); ++ ++ if(precvbuf->pbuf) ++ { ++ precvpriv->rx_pending_cnt++; ++ ++ purb = precvbuf->purb; ++ ++ //translate DMA FIFO addr to pipehandle ++ pipe = ffaddr2pipehdl(pdvobj, addr); ++ ++ usb_fill_bulk_urb(purb, pusbd, pipe, ++ precvbuf->pbuf, ++ MAX_RECVBUF_SZ, ++ usb_read_port_complete, ++ precvbuf);//context is precvbuf ++ ++ purb->transfer_dma = precvbuf->dma_transfer_addr; ++ purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; ++ ++ err = usb_submit_urb(purb, GFP_ATOMIC); ++ if((err) && (err != (-EPERM))) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x", err, purb->status)); ++ DBG_8192C("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",err,purb->status); ++ ret = _FAIL; ++ } ++ ++ } ++ ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precvbuf ==NULL\n")); ++ ret = _FAIL; ++ } ++ ++_func_exit_; ++ ++ return ret; ++} ++#else // CONFIG_USE_USB_BUFFER_ALLOC_RX ++static int recvbuf2recvframe(_adapter *padapter, _pkt *pskb) ++{ ++ u8 *pbuf; ++ u8 shift_sz = 0; ++ u16 pkt_cnt; ++ u32 pkt_offset, skb_len, alloc_sz; ++ s32 transfer_len; ++ struct recv_stat *prxstat; ++ struct phy_stat *pphy_info = NULL; ++ _pkt *pkt_copy = NULL; ++ union recv_frame *precvframe = NULL; ++ struct rx_pkt_attrib *pattrib = NULL; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ _queue *pfree_recv_queue = &precvpriv->free_recv_queue; ++ ++ ++ transfer_len = (s32)pskb->len; ++ pbuf = pskb->data; ++ ++ prxstat = (struct recv_stat *)pbuf; ++ pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff; ++ ++#if 0 //temp remove when disable usb rx aggregation ++ if((pkt_cnt > 10) || (pkt_cnt < 1) || (transfer_lenrxdw0, prxstat->rxdw1, prxstat->rxdw2, prxstat->rxdw4)); ++ ++ prxstat = (struct recv_stat *)pbuf; ++ ++ precvframe = rtw_alloc_recvframe(pfree_recv_queue); ++ if(precvframe==NULL) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: precvframe==NULL\n")); ++ DBG_8192C("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__, __LINE__); ++ goto _exit_recvbuf2recvframe; ++ } ++ ++ _rtw_init_listhead(&precvframe->u.hdr.list); ++ precvframe->u.hdr.precvbuf = NULL; //can't access the precvbuf for new arch. ++ precvframe->u.hdr.len=0; ++ ++ rtl8192c_query_rx_desc_status(precvframe, prxstat); ++ ++ pattrib = &precvframe->u.hdr.attrib; ++ if(pattrib->physt) ++ { ++ pphy_info = (struct phy_stat *)(pbuf + RXDESC_OFFSET); ++ } ++ ++ pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len; ++ ++ if((pattrib->pkt_len<=0) || (pkt_offset>transfer_len)) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("recvbuf2recvframe: pkt_len<=0\n")); ++ DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__); ++ rtw_free_recvframe(precvframe, pfree_recv_queue); ++ goto _exit_recvbuf2recvframe; ++ } ++ ++ // Modified by Albert 20101213 ++ // For 8 bytes IP header alignment. ++ if (pattrib->qos) // Qos data, wireless lan header length is 26 ++ { ++ shift_sz = 6; ++ } ++ else ++ { ++ shift_sz = 0; ++ } ++ ++ skb_len = pattrib->pkt_len; ++ ++ // for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet. ++ // modify alloc_sz for recvive crc error packet by thomas 2011-06-02 ++ if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){ ++ //alloc_sz = 1664; //1664 is 128 alignment. ++ if(skb_len <= 1650) ++ alloc_sz = 1664; ++ else ++ alloc_sz = skb_len + 14; ++ } ++ else { ++ alloc_sz = skb_len; ++ // 6 is for IP header 8 bytes alignment in QoS packet case. ++ // 8 is for skb->data 4 bytes alignment. ++ alloc_sz += 14; ++ } ++ ++ pkt_copy = rtw_skb_alloc(alloc_sz); ++ ++ if(pkt_copy) ++ { ++ pkt_copy->dev = padapter->pnetdev; ++ precvframe->u.hdr.pkt = pkt_copy; ++ precvframe->u.hdr.rx_head = pkt_copy->data; ++ precvframe->u.hdr.rx_end = pkt_copy->data + alloc_sz; ++ skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address ++ skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz. ++ _rtw_memcpy(pkt_copy->data, (pbuf + pattrib->shift_sz + pattrib->drvinfo_sz + RXDESC_SIZE), skb_len); ++ precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data; ++ ++ } ++ else ++ { ++ precvframe->u.hdr.pkt = rtw_skb_clone(pskb); ++ if(pkt_copy) ++ { ++ precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pbuf; ++ precvframe->u.hdr.rx_end = pbuf + alloc_sz; ++ } ++ else ++ { ++ DBG_8192C("recvbuf2recvframe: rtw_skb_clone fail\n"); ++ rtw_free_recvframe(precvframe, pfree_recv_queue); ++ goto _exit_recvbuf2recvframe; ++ } ++ } ++ ++ recvframe_put(precvframe, skb_len); ++ //recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE); ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ switch(pHalData->UsbRxAggMode) ++ { ++ case USB_RX_AGG_DMA: ++ case USB_RX_AGG_MIX: ++ pkt_offset = (u16)_RND128(pkt_offset); ++ break; ++ case USB_RX_AGG_USB: ++ pkt_offset = (u16)_RND4(pkt_offset); ++ break; ++ case USB_RX_AGG_DISABLE: ++ default: ++ break; ++ } ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(rtw_buddy_adapter_up(padapter)) ++ { ++ if(pre_recv_entry(precvframe, prxstat, pphy_info) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n")); ++ } ++ } ++ else ++ { ++ rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info); ++ if(rtw_recv_entry(precvframe) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n")); ++ } ++ } ++ ++#else ++ rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info); ++ if(rtw_recv_entry(precvframe) != _SUCCESS) ++ { ++ RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n")); ++ } ++#endif ++ ++ pkt_cnt--; ++ transfer_len -= pkt_offset; ++ pbuf += pkt_offset; ++ precvframe = NULL; ++ pkt_copy = NULL; ++ ++ if(transfer_len>0 && pkt_cnt==0) ++ pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff; ++ ++ }while((transfer_len>0) && (pkt_cnt>0)); ++ ++_exit_recvbuf2recvframe: ++ ++ return _SUCCESS; ++} ++ ++void rtl8192cu_recv_tasklet(void *priv) ++{ ++ _pkt *pskb; ++ _adapter *padapter = (_adapter*)priv; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ while (NULL != (pskb = skb_dequeue(&precvpriv->rx_skb_queue))) ++ { ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE)) ++ { ++ DBG_8192C("recv_tasklet => bDriverStopped or bSurpriseRemoved \n"); ++ rtw_skb_free(pskb); ++ break; ++ } ++ ++ recvbuf2recvframe(padapter, pskb); ++ ++#ifdef CONFIG_PREALLOC_RECV_SKB ++ ++ skb_reset_tail_pointer(pskb); ++ ++ pskb->len = 0; ++ ++ skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb); ++ ++#else ++ rtw_skb_free(pskb); ++#endif ++ ++ } ++ ++} ++ ++ ++static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs) ++{ ++ _irqL irqL; ++ uint isevt, *pbuf; ++ struct recv_buf *precvbuf = (struct recv_buf *)purb->context; ++ _adapter *padapter =(_adapter *)precvbuf->adapter; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n")); ++ ++ //_enter_critical(&precvpriv->lock, &irqL); ++ //precvbuf->irp_pending=_FALSE; ++ //precvpriv->rx_pending_cnt --; ++ //_exit_critical(&precvpriv->lock, &irqL); ++ ++ precvpriv->rx_pending_cnt --; ++ ++ //if(precvpriv->rx_pending_cnt== 0) ++ //{ ++ // RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: rx_pending_cnt== 0, set allrxreturnevt!\n")); ++ // _rtw_up_sema(&precvpriv->allrxreturnevt); ++ //} ++ ++ if(padapter->bSurpriseRemoved || padapter->bDriverStopped||padapter->bReadPortCancel) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ ++ #ifdef CONFIG_PREALLOC_RECV_SKB ++ precvbuf->reuse = _TRUE; ++ #else ++ if(precvbuf->pskb){ ++ DBG_8192C("==> free skb(%p)\n",precvbuf->pskb); ++ rtw_skb_free(precvbuf->pskb); ++ } ++ #endif ++ DBG_8192C("%s()-%d: RX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bReadPortCancel(%d)\n", ++ __FUNCTION__, __LINE__,padapter->bDriverStopped, padapter->bSurpriseRemoved,padapter->bReadPortCancel); ++ goto exit; ++ } ++ ++ if(purb->status==0)//SUCCESS ++ { ++ if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: (purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)\n")); ++ precvbuf->reuse = _TRUE; ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__); ++ } ++ else ++ { ++ rtw_reset_continual_urb_error(adapter_to_dvobj(padapter)); ++ ++ precvbuf->transfer_len = purb->actual_length; ++ skb_put(precvbuf->pskb, purb->actual_length); ++ skb_queue_tail(&precvpriv->rx_skb_queue, precvbuf->pskb); ++ ++ if (skb_queue_len(&precvpriv->rx_skb_queue)<=1) ++ tasklet_schedule(&precvpriv->recv_tasklet); ++ ++ precvbuf->pskb = NULL; ++ precvbuf->reuse = _FALSE; ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete : purb->status(%d) != 0 \n", purb->status)); ++ ++ DBG_8192C("###=> usb_read_port_complete => urb status(%d)\n", purb->status); ++ ++ if(rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(padapter)) == _TRUE ){ ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ ++ switch(purb->status) { ++ case -EINVAL: ++ case -EPIPE: ++ case -ENODEV: ++ case -ESHUTDOWN: ++ //padapter->bSurpriseRemoved=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n")); ++ case -ENOENT: ++ padapter->bDriverStopped=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n")); ++ break; ++ case -EPROTO: ++ case -EILSEQ: ++ case -ETIME: ++ case -ECOMM: ++ case -EOVERFLOW: ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ { ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.Wifi_Error_Status = USB_READ_PORT_FAIL; ++ } ++ #endif ++ precvbuf->reuse = _TRUE; ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ break; ++ case -EINPROGRESS: ++ precvpriv->read_port_complete_EINPROGRESS_cnt++; ++ DBG_8192C("ERROR: URB IS IN PROGRESS!/n"); ++ break; ++ default: ++ precvpriv->read_port_complete_other_urb_err_cnt++; ++ break; ++ } ++ ++ } ++ ++exit: ++ ++_func_exit_; ++ ++} ++ ++static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ _irqL irqL; ++ int err; ++ unsigned int pipe; ++ SIZE_PTR tmpaddr=0; ++ SIZE_PTR alignment=0; ++ u32 ret = _SUCCESS; ++ PURB purb = NULL; ++ struct recv_buf *precvbuf = (struct recv_buf *)rmem; ++ _adapter *adapter = pintfhdl->padapter; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(adapter); ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ ++_func_enter_; ++ ++ if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ return _FAIL; ++ } ++ ++#ifdef CONFIG_PREALLOC_RECV_SKB ++ if((precvbuf->reuse == _FALSE) || (precvbuf->pskb == NULL)) ++ { ++ if (NULL != (precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue))) ++ { ++ precvbuf->reuse = _TRUE; ++ } ++ } ++#endif ++ ++ ++ if(precvbuf !=NULL) ++ { ++ rtl8192cu_init_recvbuf(adapter, precvbuf); ++ ++ //re-assign for linux based on skb ++ if((precvbuf->reuse == _FALSE) || (precvbuf->pskb == NULL)) ++ { ++ precvbuf->pskb = rtw_skb_alloc(MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ); ++ ++ if(precvbuf->pskb == NULL) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("init_recvbuf(): alloc_skb fail!\n")); ++ precvpriv->recvbuf_skb_alloc_fail_cnt++; ++ return _FAIL; ++ } ++ ++ tmpaddr = (SIZE_PTR)precvbuf->pskb->data; ++ alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1); ++ skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment)); ++ ++ precvbuf->phead = precvbuf->pskb->head; ++ precvbuf->pdata = precvbuf->pskb->data; ++ precvbuf->ptail = skb_tail_pointer(precvbuf->pskb); ++ precvbuf->pend = skb_end_pointer(precvbuf->pskb); ++ precvbuf->pbuf = precvbuf->pskb->data; ++ } ++ else//reuse skb ++ { ++ precvbuf->phead = precvbuf->pskb->head; ++ precvbuf->pdata = precvbuf->pskb->data; ++ precvbuf->ptail = skb_tail_pointer(precvbuf->pskb); ++ precvbuf->pend = skb_end_pointer(precvbuf->pskb); ++ precvbuf->pbuf = precvbuf->pskb->data; ++ ++ precvbuf->reuse = _FALSE; ++ } ++ ++ //_enter_critical(&precvpriv->lock, &irqL); ++ //precvpriv->rx_pending_cnt++; ++ //precvbuf->irp_pending = _TRUE; ++ //_exit_critical(&precvpriv->lock, &irqL); ++ ++ precvpriv->rx_pending_cnt++; ++ ++ purb = precvbuf->purb; ++ ++ //translate DMA FIFO addr to pipehandle ++ pipe = ffaddr2pipehdl(pdvobj, addr); ++ ++ usb_fill_bulk_urb(purb, pusbd, pipe, ++ precvbuf->pbuf, ++ MAX_RECVBUF_SZ, ++ usb_read_port_complete, ++ precvbuf);//context is precvbuf ++ ++ err = usb_submit_urb(purb, GFP_ATOMIC); ++ if((err) && (err != (-EPERM))) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x", err, purb->status)); ++ DBG_8192C("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",err,purb->status); ++ ret = _FAIL; ++ } ++ } ++ else ++ { ++ precvpriv->recvbuf_null_cnt++; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precvbuf ==NULL\n")); ++ ret = _FAIL; ++ } ++ ++_func_exit_; ++ ++ return ret; ++} ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_RX ++ ++void rtl8192cu_xmit_tasklet(void *priv) ++{ ++ int ret = _FALSE; ++ _adapter *padapter = (_adapter*)priv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ if(check_fwstate(&padapter->mlmepriv, _FW_UNDER_SURVEY) == _TRUE) ++ return; ++ ++ while(1) ++ { ++ if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE) || (padapter->bWritePortCancel == _TRUE)) ++ { ++ DBG_8192C("xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel\n"); ++ break; ++ } ++ ++ ret = rtl8192cu_xmitframe_complete(padapter, pxmitpriv, NULL); ++ ++ if(ret==_FALSE) ++ break; ++ ++ } ++ ++} ++ ++void rtl8192cu_set_intf_ops(struct _io_ops *pops) ++{ ++ _func_enter_; ++ ++ _rtw_memset((u8 *)pops, 0, sizeof(struct _io_ops)); ++ ++ pops->_read8 = &usb_read8; ++ pops->_read16 = &usb_read16; ++ pops->_read32 = &usb_read32; ++ pops->_read_mem = &usb_read_mem; ++ pops->_read_port = &usb_read_port; ++ ++ pops->_write8 = &usb_write8; ++ pops->_write16 = &usb_write16; ++ pops->_write32 = &usb_write32; ++ pops->_writeN = &usb_writeN; ++ ++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ ++ pops->_write8_async= &usb_async_write8; ++ pops->_write16_async = &usb_async_write16; ++ pops->_write32_async = &usb_async_write32; ++#endif ++ pops->_write_mem = &usb_write_mem; ++ pops->_write_port = &usb_write_port; ++ ++ pops->_read_port_cancel = &usb_read_port_cancel; ++ pops->_write_port_cancel = &usb_write_port_cancel; ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++ pops->_read_interrupt = &usb_read_interrupt; ++#endif ++ ++ _func_exit_; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c +new file mode 100644 +index 000000000000..59143e3ea6a9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c +@@ -0,0 +1,1264 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_OPS_OS_C_ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ #error "Shall be Linux or Windows, but not both!\n" ++#endif ++ ++#ifndef CONFIG_USB_HCI ++ #error "CONFIG_USB_HCI shall be on!\n" ++#endif ++ ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++ ++ ++struct zero_bulkout_context ++{ ++ void *pbuf; ++ void *purb; ++ void *pirp; ++ void *padapter; ++}; ++ ++#define usb_write_cmd usb_write_mem ++#define usb_read_cmd usb_read_mem ++#define usb_write_cmd_complete usb_write_mem_complete ++//#define usb_read_cmd_complete usb_read_mem_complete ++ ++ ++ ++uint usb_init_intf_priv(struct intf_priv *pintfpriv) ++{ ++ ++ PURB piorw_urb; ++ u8 NextDeviceStackSize; ++ struct dvobj_priv *pdev = (struct dvobj_priv *)pintfpriv->intf_dev; ++ _adapter * padapter=pdev->padapter; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("\n +usb_init_intf_priv\n")); ++ ++ pintfpriv->intf_status = _IOREADY; ++ ++ if(pdev->ishighspeed) pintfpriv->max_iosz = 128; ++ else pintfpriv->max_iosz = 64; ++ ++ ++ _init_timer(&pintfpriv->io_timer, padapter->hndis_adapter, io_irp_timeout_handler, pintfpriv); ++ ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("usb_init_intf_priv:pintfpriv->max_iosz:%d\n",pintfpriv->max_iosz)); ++ ++ pintfpriv->io_wsz = 0; ++ pintfpriv->io_rsz = 0; ++ ++ pintfpriv->allocated_io_rwmem = rtw_zmalloc(pintfpriv->max_iosz +4); ++ ++ if (pintfpriv->allocated_io_rwmem == NULL){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_init_intf_priv:pintfpriv->allocated_io_rwmem == NULL\n")); ++ goto usb_init_intf_priv_fail; ++ } ++ ++ pintfpriv->io_rwmem = pintfpriv->allocated_io_rwmem + 4 \ ++ -( (u32)(pintfpriv->allocated_io_rwmem) & 3); ++ ++ ++ ++ NextDeviceStackSize = (u8)pdev->nextdevstacksz;//pintfpriv->pUsbDevObj->StackSize + 1; ++ ++ piorw_urb = (PURB)ExAllocatePool(NonPagedPool, sizeof(URB) ); ++ if(piorw_urb == NULL) ++ goto usb_init_intf_priv_fail; ++ ++ pintfpriv->piorw_urb = piorw_urb; ++ ++ pintfpriv->piorw_irp = IoAllocateIrp(NextDeviceStackSize , FALSE); ++ ++ ++ pintfpriv->io_irp_cnt=1; ++ pintfpriv->bio_irp_pending=_FALSE; ++ ++ _rtw_init_sema(&(pintfpriv->io_retevt), 0);//NdisInitializeEvent(&pintfpriv->io_irp_return_evt); ++ ++_func_exit_; ++ return _SUCCESS; ++ ++usb_init_intf_priv_fail: ++ ++ if (pintfpriv->allocated_io_rwmem) ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz +4); ++ ++ if(piorw_urb) ++ ExFreePool(piorw_urb); ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("\n -usb_init_intf_priv(usb_init_intf_priv_fail)\n")); ++ ++_func_exit_; ++ return _FAIL; ++ ++} ++ ++void usb_unload_intf_priv(struct intf_priv *pintfpriv) ++{ ++ ++_func_enter_; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n+usb_unload_intf_priv\n")); ++ ++ rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz+4); ++ ++#ifdef PLATFORM_WINDOWS ++ if(pintfpriv->piorw_urb) ++ ExFreePool(pintfpriv->piorw_urb); ++ ++ if(pintfpriv->piorw_irp) ++ IoFreeIrp(pintfpriv->piorw_irp); ++#endif ++ ++ ++#ifdef PLATFORM_LINUX ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npintfpriv->io_irp_cnt=%d\n",pintfpriv->io_irp_cnt)); ++ pintfpriv->io_irp_cnt--; ++ if(pintfpriv->io_irp_cnt){ ++ if(pintfpriv->bio_irp_pending==_TRUE){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\nkill iorw_urb\n")); ++ usb_kill_urb(pintfpriv->piorw_urb); ++ } ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n wait io_retevt\n")); ++ _rtw_down_sema(&(pintfpriv->io_retevt)); ++ } ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n cancel io_urb ok\n")); ++#endif ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n-usb_unload_intf_priv\n")); ++ ++_func_exit_; ++ ++} ++ ++void *ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr) ++{ ++ HANDLE PipeHandle = NULL; ++ _adapter *padapter = pNdisCEDvice->padapter; ++ ++ ++ if(pNdisCEDvice->nr_endpoint == 11) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3] ; ++ break; ++ case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[4]; ++ break; ++ case RTL8712_DMA_VIQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_BCNQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[6]; ++ break; ++ case RTL8712_DMA_BMCQ: //HI Queue ++ PipeHandle= padapter->halpriv.pipehdls_r8712[7]; ++ break; ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[8]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[5]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[9]; ++ break; ++ ++ } ++ ++ } ++ else if(pNdisCEDvice->nr_endpoint == 6) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3]; ++ break; ++ case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[4]; ++ break; ++ case RTL8712_DMA_VIQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ case RTL8712_DMA_BCNQ: ++ case RTL8712_DMA_BMCQ: ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[5]; ++ break; ++ ++ } ++ ++ } ++ else if(pNdisCEDvice->nr_endpoint == 4) ++ { ++ switch(addr) ++ { ++ case RTL8712_DMA_BEQ: ++ //case RTL8712_DMA_BKQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[2]; ++ break; ++ //case RTL8712_DMA_VIQ: ++ case RTL8712_DMA_VOQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[1]; ++ break; ++ case RTL8712_DMA_RX0FF: ++ case RTL8712_DMA_C2HCMD: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[0]; ++ break; ++ case RTL8712_DMA_H2CCMD: ++ case RTL8712_DMA_BCNQ: ++ case RTL8712_DMA_BMCQ: ++ case RTL8712_DMA_MGTQ: ++ PipeHandle= padapter->halpriv.pipehdls_r8712[3]; ++ break; ++ } ++ ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ffaddr2pipehdl():nr_endpoint=%d error!\n", pNdisCEDvice->nr_endpoint)); ++ } ++ ++ return PipeHandle; ++ ++} ++ ++ ++NTSTATUS usb_bulkout_zero_complete( ++ PDEVICE_OBJECT pUsbDevObj, ++ PIRP pIrp, void* pZeroContext) ++{ ++ struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)pZeroContext; ++ ++_func_enter_; ++ ++ if(pcontext) ++ { ++ if(pcontext->pbuf) ++ { ++ ExFreePool(pcontext->pbuf); ++ } ++ ++ if(pcontext->purb) ++ { ++ ExFreePool(pcontext->purb); ++ } ++ ++ if(pcontext->pirp && (pIrp ==pcontext->pirp)) ++ { ++ IoFreeIrp(pIrp); ++ } ++ ++ ExFreePool(pcontext); ++ } ++ ++_func_exit_; ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ ++ ++} ++ ++u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ struct zero_bulkout_context *pcontext; ++ unsigned char *pbuf; ++ char NextDeviceStackSize, len; ++ PIO_STACK_LOCATION nextStack; ++ USBD_STATUS usbdstatus; ++ HANDLE PipeHandle; ++ PIRP pirp = NULL; ++ PURB purb = NULL; ++ NDIS_STATUS ndisStatus = NDIS_STATUS_SUCCESS; ++ _adapter *padapter = (_adapter *)pintfhdl->adapter; ++ struct dvobj_priv *pdvobj = (struct dvobj_priv *)&padapter->dvobjpriv; ++ ++ ++_func_enter_; ++ ++ if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ return _FAIL; ++ } ++ ++ len = 0; ++ NextDeviceStackSize = (char)pdvobj->nextdevstacksz; ++ ++ pcontext = (struct zero_bulkout_context *)ExAllocatePool(NonPagedPool, sizeof(struct zero_bulkout_context)); ++ pbuf = (unsigned char *)ExAllocatePool(NonPagedPool, sizeof(int)); ++ purb = (PURB)ExAllocatePool(NonPagedPool, sizeof(URB)); ++ pirp = IoAllocateIrp(NextDeviceStackSize, FALSE); ++ ++ pcontext->pbuf = pbuf; ++ pcontext->purb = purb; ++ pcontext->pirp = pirp; ++ pcontext->padapter = padapter; ++ ++ //translate DMA FIFO addr to pipehandle ++ PipeHandle = ffaddr2pipehdl(pdvobj, addr); ++ ++ ++ // Build our URB for USBD ++ UsbBuildInterruptOrBulkTransferRequest( ++ purb, ++ sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER), ++ PipeHandle, ++ pbuf, ++ NULL, ++ len, ++ 0, ++ NULL); ++ ++ // ++ // call the calss driver to perform the operation ++ // pass the URB to the USB driver stack ++ // ++ nextStack = IoGetNextIrpStackLocation(pirp); ++ nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL; ++ nextStack->Parameters.Others.Argument1 = purb; ++ nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB; ++ ++ //Set Completion Routine ++ IoSetCompletionRoutine(pirp, // irp to use ++ usb_bulkout_zero_complete, // callback routine ++ pcontext, // context ++ TRUE, // call on success ++ TRUE, // call on error ++ TRUE); // call on cancel ++ ++ ++ // Call IoCallDriver to send the irp to the usb bus driver ++ // ++ ndisStatus = IoCallDriver(pdvobj->pnextdevobj, pirp); ++ usbdstatus = URB_STATUS(purb); ++ ++ if( USBD_HALTED(usbdstatus) ) ++ { ++ padapter->bDriverStopped=_TRUE; ++ padapter->bSurpriseRemoved=_TRUE; ++ } ++ ++ // ++ // The usb bus driver should always return STATUS_PENDING when bulk out irp async ++ // ++ if ( ndisStatus != STATUS_PENDING ) ++ { ++ return _FAIL; ++ } ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ _func_enter_; ++ ++ ++ ++ _func_exit_; ++} ++ ++NTSTATUS usb_write_mem_complete(PDEVICE_OBJECT pUsbDevObj, PIRP piowrite_irp, PVOID pusb_cnxt) ++{ ++ ++ _irqL irqL; ++ _list *head, *plist; ++ struct io_req *pio_req; ++ struct io_queue *pio_q = (struct io_queue *) pusb_cnxt; ++ struct intf_hdl *pintf = &(pio_q->intf); ++ struct intf_priv *pintfpriv = pintf->pintfpriv; ++ _adapter *padapter = (_adapter *)pintf->adapter; ++ NTSTATUS status = STATUS_SUCCESS; ++ ++ head = &(pio_q->processing); ++ ++ _func_enter_; ++ ++ _enter_critical_bh(&(pio_q->lock), &irqL); ++ ++ pintfpriv->io_irp_cnt--; ++ if(pintfpriv->io_irp_cnt ==0){ ++ _rtw_up_sema(&(pintfpriv->io_retevt)); ++ } ++ ++ pintfpriv->bio_irp_pending=_FALSE; ++ ++ switch(piowrite_irp->IoStatus.Status) ++ { ++ case STATUS_SUCCESS: ++ break; ++ ++ default: ++ padapter->bSurpriseRemoved=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usbAsynIntOutComplete:pioread_irp->IoStatus.Status !=STATUS_SUCCESS\n")); ++ break; ++ } ++ ++ //free irp in processing list... ++ while(rtw_is_list_empty(head) != _TRUE) ++ { ++ plist = get_next(head); ++ rtw_list_delete(plist); ++ pio_req = LIST_CONTAINOR(plist, struct io_req, list); ++ _rtw_up_sema(&pio_req->sema); ++ } ++ ++ _exit_critical_bh(&(pio_q->lock), &irqL); ++ ++ _func_exit_; ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ ++} ++ ++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ u32 bwritezero; ++ _irqL irqL; ++ USBD_STATUS usbdstatus; ++ PIO_STACK_LOCATION nextStack; ++ HANDLE PipeHandle; ++ struct io_req *pio_req; ++ ++ _adapter *adapter = (_adapter *)pintfhdl->adapter; ++ struct intf_priv *pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv *pdev = (struct dvobj_priv *)pintfpriv->intf_dev; ++ PURB piorw_urb = pintfpriv->piorw_urb; ++ PIRP piorw_irp = pintfpriv->piorw_irp; ++ struct io_queue *pio_queue = (struct io_queue *)adapter->pio_queue; ++ NTSTATUS NtStatus = STATUS_SUCCESS; ++ ++ _func_enter_; ++ ++ pio_req = alloc_ioreq(pio_queue); ++ ++ if ((pio_req == NULL)||(adapter->bSurpriseRemoved)){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("async_irp_write32 : pio_req =0x%x adapter->bSurpriseRemoved=0x%x",pio_req,adapter->bSurpriseRemoved )); ++ goto exit; ++ } ++ ++ _enter_critical_bh(&(pio_queue->lock), &irqL); ++ ++ rtw_list_insert_tail(&(pio_req->list),&(pio_queue->processing)); ++ ++ ++#ifdef NDIS51_MINIPORT ++ IoReuseIrp(piorw_irp, STATUS_SUCCESS); ++#else ++ piorw_irp->Cancel = _FALSE; ++#endif ++ ++ if((adapter->bDriverStopped) || (adapter->bSurpriseRemoved) ||(adapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n")); ++ _func_exit_; ++ return; ++ } ++ ++ //translate DMA FIFO addr to pipehandle ++ PipeHandle = ffaddr2pipehdl(pdev, addr); ++ ++ ++ pintfpriv->io_irp_cnt++; ++ pintfpriv->bio_irp_pending=_TRUE; ++ // Build our URB for USBD ++ UsbBuildInterruptOrBulkTransferRequest( ++ piorw_urb, ++ sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER), ++ PipeHandle, ++ (PVOID)wmem, ++ NULL, ++ cnt, ++ 0, ++ NULL); ++ ++ // ++ // call the calss driver to perform the operation ++ // pass the URB to the USB driver stack ++ // ++ nextStack = IoGetNextIrpStackLocation(piorw_irp); ++ nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL; ++ nextStack->Parameters.Others.Argument1 = (PURB)piorw_urb; ++ nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB; ++ ++ IoSetCompletionRoutine( ++ piorw_irp, // irp to use ++ usb_write_mem_complete, // routine to call when irp is done ++ pio_queue, // context to pass routine ++ TRUE, // call on success ++ TRUE, // call on error ++ TRUE); // call on cancel ++ ++ // ++ // Call IoCallDriver to send the irp to the usb port ++ // ++ NtStatus = IoCallDriver(pdev->pnextdevobj, piorw_irp); ++ usbdstatus = URB_STATUS(piorw_urb); ++ ++ // ++ // The USB driver should always return STATUS_PENDING when ++ // it receives a write irp ++ // ++ if ((NtStatus != STATUS_PENDING) || USBD_HALTED(usbdstatus) ) { ++ ++ if( USBD_HALTED(usbdstatus) ) { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_mem():USBD_HALTED(usbdstatus)=%X!\n",USBD_HALTED(usbdstatus)) ); ++ } ++ _func_exit_; ++ return;//STATUS_UNSUCCESSFUL; ++ } ++ ++ _exit_critical_bh(&(pio_queue->lock), &irqL); ++ ++ _rtw_down_sema(&pio_req->sema); ++ free_ioreq(pio_req, pio_queue); ++ ++ ++ bwritezero = _FALSE; ++ if (pdev->ishighspeed) ++ { ++ if(cnt> 0 && cnt%512 == 0) ++ bwritezero = _TRUE; ++ ++ } ++ else ++ { ++ if(cnt > 0 && cnt%64 == 0) ++ bwritezero = _TRUE; ++ } ++ ++ ++ if(bwritezero == _TRUE) ++ { ++ usb_bulkout_zero(pintfhdl, addr); ++ } ++ ++exit: ++ ++ _func_exit_; ++ ++} ++ ++NTSTATUS usb_read_port_complete(PDEVICE_OBJECT pUsbDevObj, PIRP pIrp, PVOID context) ++{ ++ uint isevt, *pbuf; ++ struct _URB_BULK_OR_INTERRUPT_TRANSFER *pbulkurb; ++ USBD_STATUS usbdstatus; ++ struct recv_buf *precvbuf = (struct recv_buf *)context; ++ _adapter *adapter =(_adapter *)precvbuf->adapter; ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ struct dvobj_priv *dev = (struct dvobj_priv *)&adapter->dvobjpriv; ++ PURB purb = precvbuf->purb; ++ struct intf_hdl *pintfhdl = &adapter->pio_queue->intf; ++ ++ //RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n")); ++ ++ usbdstatus = URB_STATUS(purb); ++ ++ _rtw_spinlock_ex(&precvpriv->lock); ++ precvbuf->irp_pending=_FALSE; ++ precvpriv->rx_pending_cnt --; ++ _rtw_spinunlock_ex(&precvpriv->lock); ++ ++ if(precvpriv->rx_pending_cnt== 0) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: rx_pending_cnt== 0, set allrxreturnevt!\n")); ++ _rtw_up_sema(&precvpriv->allrxreturnevt); ++ } ++ ++ ++ if( pIrp->Cancel == _TRUE ) { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: One IRP has been cancelled succesfully\n")); ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ } ++ if(adapter->bSurpriseRemoved) { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved)); ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ } ++ ++ switch(pIrp->IoStatus.Status) ++ { ++ case STATUS_SUCCESS: ++ ++ pbulkurb = &(precvbuf->purb)->UrbBulkOrInterruptTransfer; ++ if((pbulkurb->TransferBufferLength >(MAX_RECVBUF_SZ)) || (pbulkurb->TransferBufferLength < RXDESC_SIZE) ) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete: (pbulkurb->TransferBufferLength > MAX_RECVBUF_SZ) || (pbulkurb->TransferBufferLength < RXDESC_SIZE)\n")); ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ else ++ { ++ precvbuf->transfer_len = pbulkurb->TransferBufferLength; ++ ++ pbuf = (uint*)precvbuf->pbuf; ++ ++ if((isevt = *(pbuf+1)&0x1ff) == 0x1ff) ++ { ++ rxcmd_event_hdl(adapter, pbuf);//rx c2h events ++ ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ else ++ { ++ if(recvbuf2recvframe(adapter, precvbuf)==_FAIL)//rx packets ++ { ++ //precvbuf->reuse = _TRUE; ++ rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ } ++ ++ } ++ ++ break; ++ ++ default: ++ ++ if( !USBD_HALTED(usbdstatus) ) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete():USBD_HALTED(usbdstatus)=%x (need to handle ) \n",USBD_HALTED(usbdstatus))); ++ ++ } ++ else ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete(): USBD_HALTED(usbdstatus)=%x \n\n", USBD_HALTED(usbdstatus)) ); ++ adapter->bDriverStopped = _TRUE; ++ adapter->bSurpriseRemoved = _TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete(): USBD_HALTED(usbdstatus)=%x \n\n", USBD_HALTED(usbdstatus))) ; ++ } ++ ++ break; ++ ++ } ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ ++} ++ ++u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ u8 *pdata; ++ u16 size; ++ PURB purb; ++ PIRP pirp; ++ PIO_STACK_LOCATION nextStack; ++ NTSTATUS ntstatus; ++ USBD_STATUS usbdstatus; ++ HANDLE PipeHandle; ++ struct recv_buf *precvbuf = (struct recv_buf *)rmem; ++ struct intf_priv *pintfpriv = pintfhdl->pintfpriv; ++ struct dvobj_priv *pdev = (struct dvobj_priv *)pintfpriv->intf_dev; ++ _adapter *adapter = (_adapter *)pdev->padapter; ++ struct recv_priv *precvpriv = &adapter->recvpriv; ++ u32 bResult = _FALSE; ++ ++_func_enter_; ++ ++ if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ return bResult; ++ } ++ ++ if(precvbuf !=NULL) ++ { ++ ++ rtl8192cu_init_recvbuf(adapter, precvbuf); ++ ++ _rtw_spinlock(&precvpriv->lock); ++ precvpriv->rx_pending_cnt++; ++ precvbuf->irp_pending = _TRUE; ++ _rtw_spinunlock(&precvpriv->lock); ++ ++ pdata = (u8*)precvbuf->pbuf; ++ ++ size = sizeof( struct _URB_BULK_OR_INTERRUPT_TRANSFER ); ++ purb = precvbuf->purb; ++ ++ //translate DMA FIFO addr to pipehandle ++ PipeHandle = ffaddr2pipehdl(pdev, addr); ++ ++ UsbBuildInterruptOrBulkTransferRequest( ++ purb, ++ (USHORT)size, ++ PipeHandle, ++ pdata, ++ NULL, ++ MAX_RECVBUF_SZ, ++ USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK, ++ NULL ++ ); ++ ++ pirp = precvbuf->pirp; ++ ++#if NDIS51_MINIPORT ++ IoReuseIrp(pirp, STATUS_SUCCESS); ++#else ++ pirp->Cancel = _FALSE; ++#endif ++ ++ // call the class driver to perform the operation ++ // and pass the URB to the USB driver stack ++ nextStack = IoGetNextIrpStackLocation(pirp); ++ nextStack->Parameters.Others.Argument1 = purb; ++ nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB; ++ nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL; ++ ++ IoSetCompletionRoutine( ++ pirp, // irp to use ++ usb_read_port_complete, // routine to call when irp is done ++ precvbuf, // context to pass routine ++ TRUE, // call on success ++ TRUE, // call on error ++ TRUE); // call on cancel ++ ++ // ++ // The IoCallDriver routine ++ // sends an IRP to the driver associated with a specified device object. ++ // ++ ntstatus = IoCallDriver(pdev->pnextdevobj, pirp); ++ usbdstatus = URB_STATUS(purb); ++ ++ if( USBD_HALTED(usbdstatus) ) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port(): USBD_HALTED(usbdstatus=0x%.8x)=%.8x \n\n", usbdstatus, USBD_HALTED(usbdstatus))); ++ pdev->padapter->bDriverStopped=_TRUE; ++ pdev->padapter->bSurpriseRemoved=_TRUE; ++ } ++ ++ if( ntstatus == STATUS_PENDING ) ++ { ++ bResult = _TRUE;// The IRP is pended in USBD as we expected. ++ } ++ else { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port(): IoCallDriver failed!!! IRP STATUS: %X\n", ntstatus)); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port(): IoCallDriver failed!!! USB STATUS: %X\n", usbdstatus)); ++ } ++ ++ } ++ else{ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precv_frame ==NULL\n")); ++ } ++ ++_func_exit_; ++ ++ return bResult; ++ ++} ++ ++void usb_read_port_cancel(_adapter *padapter) ++{ ++ struct recv_buf *precvbuf; ++ sint i; ++ struct dvobj_priv *pdev = &padapter->dvobjpriv; ++ struct recv_priv *precvpriv=&padapter->recvpriv; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n ==>usb_read_port_cancel\n")); ++ ++ _rtw_spinlock(&precvpriv->lock); ++ precvpriv->rx_pending_cnt--; //decrease 1 for Initialize ++ ++ _rtw_spinunlock(&precvpriv->lock); ++ ++ if (precvpriv->rx_pending_cnt) ++ { ++ // Canceling Pending Recv Irp ++ precvbuf = (struct recv_buf *)precvpriv->precv_buf; ++ ++ for( i = 0; i < NR_RECVBUFF; i++ ) ++ { ++ if (precvbuf->irp_pending == _TRUE) ++ { ++ IoCancelIrp(precvbuf->pirp); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_cancel() :IoCancelIrp\n")); ++ } ++ ++ precvbuf++; ++ } ++ ++ _rtw_down_sema(&precvpriv->allrxreturnevt); ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_cancel:down sema\n")); ++ ++ } ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("<==usb_read_port_cancel\n")); ++ ++} ++ ++NTSTATUS usb_write_port_complete( ++ PDEVICE_OBJECT pUsbDevObj, ++ PIRP pIrp, ++ PVOID pTxContext ++) ++{ ++ u32 i, bIrpSuccess, sz; ++ NTSTATUS status = STATUS_SUCCESS; ++ u8 *ptr; ++ struct xmit_frame *pxmitframe = (struct xmit_frame *) pTxContext; ++ struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf; ++ _adapter *padapter = pxmitframe->padapter; ++ struct dvobj_priv *pdev = (struct dvobj_priv *)&padapter->dvobjpriv; ++ struct io_queue *pio_queue = (struct io_queue *)padapter->pio_queue; ++ struct intf_hdl *pintfhdl = &(pio_queue->intf); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("+usb_write_port_complete\n")); ++ ++ _rtw_spinlock_ex(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt--; ++ _rtw_spinunlock_ex(&pxmitpriv->lock); ++ ++ if(pxmitpriv->txirp_cnt==0){ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n")); ++ _rtw_up_sema(&(pxmitpriv->tx_retevt)); ++ } ++ ++ status = pIrp->IoStatus.Status; ++ ++ if( status == STATUS_SUCCESS ) ++ bIrpSuccess = _TRUE; ++ else ++ bIrpSuccess = _FALSE; ++ ++ if( pIrp->Cancel == _TRUE ) ++ { ++ if(pxmitframe !=NULL) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port_complete:pIrp->Cancel == _TRUE,(pxmitframe !=NULL\n")); ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ } ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ } ++ ++ if(padapter->bSurpriseRemoved) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ } ++ ++ ++ // ++ // Send 0-byte here if necessary. ++ // ++ // ++ // 1. We MUST keep at most one IRP pending in each endpoint, otherwise USB host controler driver will hang. ++ // Besides, even 0-byte IRP shall be count into #IRP sent down, so, we send 0-byte here instead of TxFillDescriptor8187(). ++ // 2. If we don't count 0-byte IRP into an #IRP sent down, Tx will stuck when we download files via BT and ++ // play online video on XP SP1 EHCU. ++ // 2005.12.26, by rcnjko. ++ // ++ ++ ++ for(i=0; i< 8; i++) ++ { ++ if(pIrp == pxmitframe->pxmit_irp[i]) ++ { ++ pxmitframe->bpending[i] = _FALSE;// ++ //ac_tag = pxmitframe->ac_tag[i]; ++ sz = pxmitframe->sz[i]; ++ break; ++ } ++ } ++ ++#if 0 ++ pxmitframe->fragcnt--; ++ if(pxmitframe->fragcnt == 0)// if((pxmitframe->fragcnt == 0) && (pxmitframe->irpcnt == 8)){ ++ { ++ //RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port_complete:pxmitframe->fragcnt == 0\n")); ++ rtw_free_xmitframe(pxmitpriv,pxmitframe); ++ } ++#else ++ ++ //not to consider tx fragment ++ rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++#endif ++ ++ rtl8192cu_xmitframe_complete(padapter, pxmitpriv, pxmitbuf); ++ ++_func_exit_; ++ ++ return STATUS_MORE_PROCESSING_REQUIRED; ++ ++} ++ ++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ u32 i, bwritezero; ++ u8 *ptr; ++ PIO_STACK_LOCATION nextStack; ++ USBD_STATUS usbdstatus; ++ HANDLE PipeHandle; ++ PIRP pirp = NULL; ++ PURB purb = NULL; ++ NDIS_STATUS ndisStatus = NDIS_STATUS_SUCCESS; ++ _adapter *padapter = (_adapter *)pintfhdl->adapter; ++ struct dvobj_priv *pNdisCEDvice = (struct dvobj_priv *)&padapter->dvobjpriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct xmit_frame *pxmitframe = (struct xmit_frame *)wmem; ++ ++_func_enter_; ++ ++ if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ return _FAIL; ++ } ++ ++ ++ for(i=0; i<8; i++) ++ { ++ if(pxmitframe->bpending[i] == _FALSE) ++ { ++ _rtw_spinlock(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt++; ++ pxmitframe->bpending[i] = _TRUE; ++ _rtw_spinunlock(&pxmitpriv->lock); ++ ++ pxmitframe->sz[i] = cnt; ++ purb = pxmitframe->pxmit_urb[i]; ++ pirp = pxmitframe->pxmit_irp[i]; ++ ++ //pxmitframe->ac_tag[i] = ac_tag; ++ ++ break; ++ } ++ } ++ ++ bwritezero = _FALSE; ++ if (pNdisCEDvice->ishighspeed) ++ { ++ if(cnt> 0 && cnt%512 == 0) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ishighspeed, cnt=%d\n", cnt)); ++ //cnt=cnt+1; ++ bwritezero = _TRUE; ++ } ++ } ++ else ++ { ++ if(cnt > 0 && cnt%64 == 0) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cnt=%d\n", cnt)); ++ //cnt=cnt+1; ++ bwritezero = _TRUE; ++ } ++ } ++ ++ ++#ifdef NDIS51_MINIPORT ++ IoReuseIrp(pirp, STATUS_SUCCESS); ++#else ++ pirp->Cancel = _FALSE; ++#endif ++ ++ ++ //translate DMA FIFO addr to pipehandle ++ PipeHandle = ffaddr2pipehdl(pNdisCEDvice, addr); ++ ++ ++ // Build our URB for USBD ++ UsbBuildInterruptOrBulkTransferRequest( ++ purb, ++ sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER), ++ PipeHandle, ++ pxmitframe->mem_addr, ++ NULL, ++ cnt, ++ 0, ++ NULL); ++ ++ // ++ // call the calss driver to perform the operation ++ // pass the URB to the USB driver stack ++ // ++ nextStack = IoGetNextIrpStackLocation(pirp); ++ nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL; ++ nextStack->Parameters.Others.Argument1 = purb; ++ nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB; ++ ++ //Set Completion Routine ++ IoSetCompletionRoutine(pirp, // irp to use ++ usb_write_port_complete, // callback routine ++ pxmitframe, // context ++ TRUE, // call on success ++ TRUE, // call on error ++ TRUE); // call on cancel ++ ++ ++ // Call IoCallDriver to send the irp to the usb bus driver ++ // ++ ndisStatus = IoCallDriver(pNdisCEDvice->pnextdevobj, pirp); ++ usbdstatus = URB_STATUS(purb); ++ ++ if( USBD_HALTED(usbdstatus) ) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port(): USBD_HALTED(usbdstatus)=%x set bDriverStopped TRUE!\n\n",USBD_HALTED(usbdstatus)) ); ++ padapter->bDriverStopped=_TRUE; ++ padapter->bSurpriseRemoved=_TRUE; ++ } ++ ++ // ++ // The usb bus driver should always return STATUS_PENDING when bulk out irp async ++ // ++ if ( ndisStatus != STATUS_PENDING ) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port(): ndisStatus(%x) != STATUS_PENDING!\n\n", ndisStatus)); ++ ++ _func_exit_; ++ ++ return _FAIL; ++ } ++ ++ if(bwritezero == _TRUE) ++ { ++ usb_bulkout_zero(pintfhdl, addr); ++ } ++ ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++} ++ ++ ++void usb_write_port_cancel(_adapter *padapter) ++{ ++ ++ sint i,j; ++ struct dvobj_priv *pdev = &padapter->dvobjpriv; ++ struct xmit_priv *pxmitpriv=&padapter->xmitpriv; ++ struct xmit_frame *pxmitframe; ++ ++ _rtw_spinlock(&pxmitpriv->lock); ++ pxmitpriv->txirp_cnt--; //decrease 1 for Initialize ++ ++ _rtw_spinunlock(&pxmitpriv->lock); ++ ++ if (pxmitpriv->txirp_cnt) ++ { ++ // Canceling Pending Recv Irp ++ pxmitframe= (struct xmit_frame *)pxmitpriv->pxmit_frame_buf; ++ ++ for( i = 0; i < NR_XMITFRAME; i++ ) ++ { ++ for(j=0;j<8;j++) ++ { ++ if (pxmitframe->bpending[j]==_TRUE) ++ { ++ IoCancelIrp(pxmitframe->pxmit_irp[j]); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usb_write_port_cancel() :IoCancelIrp\n")); ++ ++ } ++ } ++ ++ pxmitframe++; ++ } ++ ++ _rtw_down_sema(&(pxmitpriv->tx_retevt)); ++ ++ } ++ ++} ++ ++ ++/*! \brief Wrap the pUrb to an IRP and send this IRP to Bus Driver. Then wait for this IRP completion. ++ The Caller shall be at Passive Level. ++*/ ++NTSTATUS sync_callusbd(struct dvobj_priv *pdvobjpriv, PURB purb) ++{ ++ ++ KEVENT kevent; ++ PIRP irp; ++ IO_STATUS_BLOCK iostatusblock; ++ PIO_STACK_LOCATION nextstack; ++ USBD_STATUS usbdstatus; ++ LARGE_INTEGER waittime; ++ NTSTATUS ntstatus = STATUS_SUCCESS; ++ _adapter *padapter = pdvobjpriv->padapter; ++ ++ ++ _func_enter_; ++ ++// if(padapter->bDriverStopped) { ++// goto exit; ++// } ++ ++ KeInitializeEvent(&kevent, NotificationEvent, _FALSE); ++ irp = IoBuildDeviceIoControlRequest( ++ IOCTL_INTERNAL_USB_SUBMIT_URB, ++ pdvobjpriv->pphysdevobj,//CEdevice->pUsbDevObj, ++ NULL, ++ 0, ++ NULL, ++ 0, ++ _TRUE, ++ &kevent, ++ &iostatusblock); ++ ++ if(irp == NULL) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("SyncCallUSBD: memory alloc for irp failed\n")); ++ ntstatus=STATUS_INSUFFICIENT_RESOURCES; ++ goto exit; ++ } ++ ++ nextstack = IoGetNextIrpStackLocation(irp); ++ if(nextstack == NULL) ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("IoGetNextIrpStackLocation fail\n")); ++ ++ nextstack->Parameters.Others.Argument1 = purb; ++ ++ // Issue an IRP for Sync IO. ++ ntstatus = IoCallDriver(pdvobjpriv->pphysdevobj, irp); ++ usbdstatus = URB_STATUS(purb); ++ ++ if(ntstatus == STATUS_PENDING) ++ { ++ // Method 1 ++ waittime.QuadPart = -10000 * 50000; ++ ntstatus = KeWaitForSingleObject(&kevent, Executive, KernelMode, _FALSE, &waittime); //8150 code ++ ++ // Method 2 ++ //ntStatus = KeWaitForSingleObject(&Kevent, Executive, KernelMode, FALSE, NULL); //DDK sample ++ ++ usbdstatus = URB_STATUS(purb); ++ ++ if(ntstatus == STATUS_TIMEOUT) ++ { ++ //usbdevice->nIoStuckCnt++; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("SyncCallUSBD: TIMEOUT....5000ms\n")); ++ ++ // Method 2 ++ IoCancelIrp(irp); ++ ntstatus = KeWaitForSingleObject(&kevent, Executive, KernelMode, _FALSE, NULL); //DDK sample ++ usbdstatus = URB_STATUS(purb); ++ ++ usbdstatus = USBD_STATUS_SUCCESS; ++ } ++ ++ } ++ ++exit: ++ ++ _func_exit_; ++ ++ return ntstatus; ++ ++} ++int usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype) ++{ ++ PURB purb; ++ u8 ret; ++ unsigned long transferflags; ++ NTSTATUS ntstatus; ++ ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)pintfpriv->intf_dev; ++ ++ _func_enter_; ++ ++ ret=_TRUE; ++ purb = (PURB)ExAllocatePool(NonPagedPool, sizeof(struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST) ); ++ if(purb == NULL) { ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq(): Failed to allocate urb !!!\n")); ++ ret =_FALSE; ++ goto exit; ++ } ++ ++ if (requesttype == 0x01) { ++ transferflags = USBD_TRANSFER_DIRECTION_IN;//read_in ++ } else { ++ transferflags= 0;//write_out ++ } ++ ++ UsbBuildVendorRequest( ++ purb, //Pointer to an URB that is to be formatted as a vendor or class request. ++ URB_FUNCTION_VENDOR_DEVICE, //Indicates the URB is a vendor-defined request for a USB device. ++ sizeof(struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST), //Specifies the length, in bytes, of the URB. ++ transferflags, //TransferFlags ++ 0, //ReservedBits ++ request, //Request ++ value, //Value ++ index, //Index ++ pdata, //TransferBuffer ++ NULL, //TransferBufferMDL ++ len, //TransferBufferLength ++ NULL //Link ++ ); ++ ++ ntstatus = sync_callusbd(pdvobjpriv, purb); ++ if(!NT_SUCCESS(ntstatus)) ++ { ++ ExFreePool(purb); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usbctrl_vendorreq() : SOMETHING WRONG\n") ); ++ ret = _FALSE; ++ goto exit; ++ } ++ ++ ExFreePool(purb); ++ ++exit: ++ _func_exit_; ++ ++ return ret; ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/ifcfg-wlan0 b/drivers/net/wireless/realtek/rtl8192cu/ifcfg-wlan0 +new file mode 100755 +index 000000000000..7ecb7ae62c7f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/ifcfg-wlan0 +@@ -0,0 +1,4 @@ ++#DHCP client ++DEVICE=wlan0 ++BOOTPROTO=dhcp ++ONBOOT=yes +\ No newline at end of file +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CEHWImg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CEHWImg.h +new file mode 100644 +index 000000000000..2ae36e452ce3 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CEHWImg.h +@@ -0,0 +1,85 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192CE_FW_IMG_H ++#define __INC_HAL8192CE_FW_IMG_H ++ ++#include ++ ++/*Created on 2011/ 6/15, 5:45*/ ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define TSMCImgArrayLength 15706 //v84 TSMC COMMON 2012-04-13 ++#else //#ifdef CONFIG_P2P ++#define TSMCImgArrayLength 16126 //v88 TSMC P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CEFwTSMCImgArray[TSMCImgArrayLength]; ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define UMCACutImgArrayLength 16248 //v79 UMC A Cut COMMON 2011-10-06 ++#else //#ifdef CONFIG_P2P ++#define UMCACutImgArrayLength 16126 //v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CEFwUMCACutImgArray[UMCACutImgArrayLength]; ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define UMCBCutImgArrayLength 15686 //v84 UMC B Cut COMMON 2012-04-13 ++#else //#ifdef CONFIG_P2P ++#define UMCBCutImgArrayLength 16096 //v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CEFwUMCBCutImgArray[UMCBCutImgArrayLength]; ++ ++//8192C_Formal_92CE_PHYforMP_110804 2011-11-23 ++//8188C_Formal_88CE_PHYforMP_111117 2011-11-23 ++ ++#define PHY_REG_2TArrayLength 374 ++extern u32 Rtl8192CEPHY_REG_2TArray[PHY_REG_2TArrayLength]; ++#define PHY_REG_1TArrayLength 374 ++extern u32 Rtl8192CEPHY_REG_1TArray[PHY_REG_1TArrayLength]; ++#define PHY_ChangeTo_1T1RArrayLength 1 ++extern u32 Rtl8192CEPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength]; ++#define PHY_ChangeTo_1T2RArrayLength 1 ++extern u32 Rtl8192CEPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength]; ++#define PHY_ChangeTo_2T2RArrayLength 1 ++extern u32 Rtl8192CEPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength]; ++#define PHY_REG_Array_PGLength 336 ++extern u32 Rtl8192CEPHY_REG_Array_PG[PHY_REG_Array_PGLength]; ++#define PHY_REG_Array_MPLength 4 ++extern u32 Rtl8192CEPHY_REG_Array_MP[PHY_REG_Array_MPLength]; ++#define RadioA_2TArrayLength 282 ++extern u32 Rtl8192CERadioA_2TArray[RadioA_2TArrayLength]; ++#define RadioB_2TArrayLength 78 ++extern u32 Rtl8192CERadioB_2TArray[RadioB_2TArrayLength]; ++#define RadioA_1TArrayLength 282 ++extern u32 Rtl8192CERadioA_1TArray[RadioA_1TArrayLength]; ++#define RadioB_1TArrayLength 1 ++extern u32 Rtl8192CERadioB_1TArray[RadioB_1TArrayLength]; ++#define RadioB_GM_ArrayLength 1 ++extern u32 Rtl8192CERadioB_GM_Array[RadioB_GM_ArrayLength]; ++// MAC reg V14 - 2011-11-23 ++#define MAC_2T_ArrayLength 174 ++extern u32 Rtl8192CEMAC_2T_Array[MAC_2T_ArrayLength]; ++#define MACPHY_Array_PGLength 1 ++extern u32 Rtl8192CEMACPHY_Array_PG[MACPHY_Array_PGLength]; ++#define AGCTAB_2TArrayLength 320 ++extern u32 Rtl8192CEAGCTAB_2TArray[AGCTAB_2TArrayLength]; ++#define AGCTAB_1TArrayLength 320 ++extern u32 Rtl8192CEAGCTAB_1TArray[AGCTAB_1TArrayLength]; ++ ++#endif //__INC_HAL8192CE_FW_IMG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyCfg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyCfg.h +new file mode 100644 +index 000000000000..918b52056124 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyCfg.h +@@ -0,0 +1,427 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/***************************************************************************** ++ * Module: __INC_HAL8192CPHYCFG_H ++ * ++ * ++ * Note: ++ * ++ * ++ * Export: Constants, macro, functions(API), global variables(None). ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. ++ * 2. Reorganize code architecture. ++ * ++ *****************************************************************************/ ++ /* Check to see if the file has been included already. */ ++#ifndef __INC_HAL8192CPHYCFG_H ++#define __INC_HAL8192CPHYCFG_H ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++#define LOOP_LIMIT 5 ++#define MAX_STALL_TIME 50 //us ++#define AntennaDiversityValue 0x80 //(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80) ++#define MAX_TXPWR_IDX_NMODE_92S 63 ++#define Reset_Cnt_Limit 3 ++ ++#define IQK_MAC_REG_NUM 4 ++#define IQK_ADDA_REG_NUM 16 ++#define IQK_BB_REG_NUM 9 ++#define HP_THERMAL_NUM 8 ++ ++#ifdef CONFIG_PCI_HCI ++#define MAX_AGGR_NUM 0x0A0A ++#else ++#define MAX_AGGR_NUM 0x0909 ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++#define SET_RTL8192SE_RF_SLEEP(_pAdapter) \ ++{ \ ++ u1Byte u1bTmp; \ ++ u1bTmp = PlatformEFIORead1Byte(_pAdapter, REG_LDOV12D_CTRL); \ ++ u1bTmp |= BIT0; \ ++ PlatformEFIOWrite1Byte(_pAdapter, REG_LDOV12D_CTRL, u1bTmp); \ ++ PlatformEFIOWrite1Byte(_pAdapter, REG_SPS_OCP_CFG, 0x0); \ ++ PlatformEFIOWrite1Byte(_pAdapter, TXPAUSE, 0xFF); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \ ++ delay_us(100); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \ ++ PlatformEFIOWrite1Byte(_pAdapter, PHY_CCA, 0x0); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x37FC); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \ ++} ++#endif ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++/*------------------------------Define structure----------------------------*/ ++typedef enum _SwChnlCmdID{ ++ CmdID_End, ++ CmdID_SetTxPowerLevel, ++ CmdID_BBRegWrite10, ++ CmdID_WritePortUlong, ++ CmdID_WritePortUshort, ++ CmdID_WritePortUchar, ++ CmdID_RF_WriteReg, ++}SwChnlCmdID; ++ ++ ++/* 1. Switch channel related */ ++typedef struct _SwChnlCmd{ ++ SwChnlCmdID CmdID; ++ u32 Para1; ++ u32 Para2; ++ u32 msDelay; ++}SwChnlCmd; ++ ++typedef enum _HW90_BLOCK{ ++ HW90_BLOCK_MAC = 0, ++ HW90_BLOCK_PHY0 = 1, ++ HW90_BLOCK_PHY1 = 2, ++ HW90_BLOCK_RF = 3, ++ HW90_BLOCK_MAXIMUM = 4, // Never use this ++}HW90_BLOCK_E, *PHW90_BLOCK_E; ++ ++#define RF_PATH_MAX 2 ++ ++#define CHANNEL_MAX_NUMBER 14 // 14 is the max channel number ++#define CHANNEL_GROUP_MAX 3 // ch1~3, ch4~9, ch10~14 total three groups ++ ++typedef enum _WIRELESS_MODE { ++ WIRELESS_MODE_UNKNOWN = 0x00, ++ WIRELESS_MODE_A = 0x01, ++ WIRELESS_MODE_B = 0x02, ++ WIRELESS_MODE_G = 0x04, ++ WIRELESS_MODE_AUTO = 0x08, ++ WIRELESS_MODE_N_24G = 0x10, ++ WIRELESS_MODE_N_5G = 0x20 ++} WIRELESS_MODE; ++ ++typedef enum _BaseBand_Config_Type{ ++ BaseBand_Config_PHY_REG = 0, //Radio Path A ++ BaseBand_Config_AGC_TAB = 1, //Radio Path B ++}BaseBand_Config_Type, *PBaseBand_Config_Type; ++ ++ ++typedef enum _PHY_Rate_Tx_Power_Offset_Area{ ++ RA_OFFSET_LEGACY_OFDM1, ++ RA_OFFSET_LEGACY_OFDM2, ++ RA_OFFSET_HT_OFDM1, ++ RA_OFFSET_HT_OFDM2, ++ RA_OFFSET_HT_OFDM3, ++ RA_OFFSET_HT_OFDM4, ++ RA_OFFSET_HT_CCK, ++}RA_OFFSET_AREA,*PRA_OFFSET_AREA; ++ ++ ++/* BB/RF related */ ++typedef enum _RF_TYPE_8190P{ ++ RF_TYPE_MIN, // 0 ++ RF_8225=1, // 1 11b/g RF for verification only ++ RF_8256=2, // 2 11b/g/n ++ RF_8258=3, // 3 11a/b/g/n RF ++ RF_6052=4, // 4 11b/g/n RF ++ //RF_6052=5, // 4 11b/g/n RF ++ // TODO: We sholud remove this psudo PHY RF after we get new RF. ++ RF_PSEUDO_11N=5, // 5, It is a temporality RF. ++}RF_TYPE_8190P_E,*PRF_TYPE_8190P_E; ++ ++typedef struct _BB_REGISTER_DEFINITION{ ++ u32 rfintfs; // set software control: ++ // 0x870~0x877[8 bytes] ++ ++ u32 rfintfi; // readback data: ++ // 0x8e0~0x8e7[8 bytes] ++ ++ u32 rfintfo; // output data: ++ // 0x860~0x86f [16 bytes] ++ ++ u32 rfintfe; // output enable: ++ // 0x860~0x86f [16 bytes] ++ ++ u32 rf3wireOffset; // LSSI data: ++ // 0x840~0x84f [16 bytes] ++ ++ u32 rfLSSI_Select; // BB Band Select: ++ // 0x878~0x87f [8 bytes] ++ ++ u32 rfTxGainStage; // Tx gain stage: ++ // 0x80c~0x80f [4 bytes] ++ ++ u32 rfHSSIPara1; // wire parameter control1 : ++ // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] ++ ++ u32 rfHSSIPara2; // wire parameter control2 : ++ // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] ++ ++ u32 rfSwitchControl; //Tx Rx antenna control : ++ // 0x858~0x85f [16 bytes] ++ ++ u32 rfAGCControl1; //AGC parameter control1 : ++ // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] ++ ++ u32 rfAGCControl2; //AGC parameter control2 : ++ // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] ++ ++ u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : ++ // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] ++ ++ u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : ++ // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] ++ ++ u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix ++ // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] ++ ++ u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type ++ // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] ++ ++ u32 rfLSSIReadBack; //LSSI RF readback data SI mode ++ // 0x8a0~0x8af [16 bytes] ++ ++ u32 rfLSSIReadBackPi; //LSSI RF readback data PI mode 0x8b8-8bc for Path A and B ++ ++}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T; ++ ++#ifdef CONFIG_MP_INCLUDED ++typedef enum _ANTENNA_PATH{ ++ ANTENNA_NONE = 0x00, ++ ANTENNA_D , ++ ANTENNA_C , ++ ANTENNA_CD , ++ ANTENNA_B , ++ ANTENNA_BD , ++ ANTENNA_BC , ++ ANTENNA_BCD , ++ ANTENNA_A , ++ ANTENNA_AD , ++ ANTENNA_AC , ++ ANTENNA_ACD , ++ ANTENNA_AB , ++ ANTENNA_ABD , ++ ANTENNA_ABC , ++ ANTENNA_ABCD ++} ANTENNA_PATH; ++#endif ++ ++typedef struct _R_ANTENNA_SELECT_OFDM{ ++ u32 r_tx_antenna:4; ++ u32 r_ant_l:4; ++ u32 r_ant_non_ht:4; ++ u32 r_ant_ht1:4; ++ u32 r_ant_ht2:4; ++ u32 r_ant_ht_s1:4; ++ u32 r_ant_non_ht_s1:4; ++ u32 OFDM_TXSC:2; ++ u32 Reserved:2; ++}R_ANTENNA_SELECT_OFDM; ++ ++typedef struct _R_ANTENNA_SELECT_CCK{ ++ u8 r_cckrx_enable_2:2; ++ u8 r_cckrx_enable:2; ++ u8 r_ccktx_enable:4; ++}R_ANTENNA_SELECT_CCK; ++ ++/*------------------------------Define structure----------------------------*/ ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++ ++/*--------------------------Exported Function prototype---------------------*/ ++// ++// BB and RF register read/write ++// ++u32 rtl8192c_PHY_QueryBBReg( IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask ); ++void rtl8192c_PHY_SetBBReg( IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ); ++u32 rtl8192c_PHY_QueryRFReg( IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask ); ++void rtl8192c_PHY_SetRFReg( IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ); ++ ++// ++// Initialization related function ++// ++/* MAC/BB/RF HAL config */ ++int PHY_MACConfig8192C( IN PADAPTER Adapter ); ++int PHY_BBConfig8192C( IN PADAPTER Adapter ); ++int PHY_RFConfig8192C( IN PADAPTER Adapter ); ++/* RF config */ ++int rtl8192c_PHY_ConfigRFWithParaFile( IN PADAPTER Adapter, ++ IN u8* pFileName, ++ IN RF_RADIO_PATH_E eRFPath); ++int rtl8192c_PHY_ConfigRFWithHeaderFile( IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath); ++ ++/* BB/RF readback check for making sure init OK */ ++int rtl8192c_PHY_CheckBBAndRFOK( IN PADAPTER Adapter, ++ IN HW90_BLOCK_E CheckBlock, ++ IN RF_RADIO_PATH_E eRFPath ); ++/* Read initi reg value for tx power setting. */ ++void rtl8192c_PHY_GetHWRegOriginalValue( IN PADAPTER Adapter ); ++ ++// ++// RF Power setting ++// ++//extern BOOLEAN PHY_SetRFPowerState(IN PADAPTER Adapter, ++// IN RT_RF_POWER_STATE eRFPowerState); ++ ++// ++// BB TX Power R/W ++// ++void PHY_GetTxPowerLevel8192C( IN PADAPTER Adapter, ++ OUT u32* powerlevel ); ++void PHY_SetTxPowerLevel8192C( IN PADAPTER Adapter, ++ IN u8 channel ); ++BOOLEAN PHY_UpdateTxPowerDbm8192C( IN PADAPTER Adapter, ++ IN int powerInDbm ); ++ ++// ++VOID ++PHY_ScanOperationBackup8192C(IN PADAPTER Adapter, ++ IN u8 Operation ); ++ ++// ++// Switch bandwidth for 8192S ++// ++//extern void PHY_SetBWModeCallback8192C( IN PRT_TIMER pTimer ); ++void PHY_SetBWMode8192C( IN PADAPTER pAdapter, ++ IN HT_CHANNEL_WIDTH ChnlWidth, ++ IN unsigned char Offset ); ++ ++// ++// Set FW CMD IO for 8192S. ++// ++//extern BOOLEAN HalSetIO8192C( IN PADAPTER Adapter, ++// IN IO_TYPE IOType); ++ ++// ++// Set A2 entry to fw for 8192S ++// ++extern void FillA2Entry8192C( IN PADAPTER Adapter, ++ IN u8 index, ++ IN u8* val); ++ ++ ++// ++// channel switch related funciton ++// ++//extern void PHY_SwChnlCallback8192C( IN PRT_TIMER pTimer ); ++void PHY_SwChnl8192C( IN PADAPTER pAdapter, ++ IN u8 channel ); ++ // Call after initialization ++void PHY_SwChnlPhy8192C( IN PADAPTER pAdapter, ++ IN u8 channel ); ++ ++void ChkFwCmdIoDone( IN PADAPTER Adapter); ++ ++#ifdef USE_WORKITEM ++//extern void SetIOWorkItemCallback( IN PVOID pContext ); ++#else ++//extern void SetIOTimerCallback( IN PRT_TIMER pTimer); ++#endif ++ ++// ++// BB/MAC/RF other monitor API ++// ++void PHY_SetMonitorMode8192C(IN PADAPTER pAdapter, ++ IN BOOLEAN bEnableMonitorMode ); ++ ++BOOLEAN PHY_CheckIsLegalRfPath8192C(IN PADAPTER pAdapter, ++ IN u32 eRFPath ); ++ ++// ++// IQ calibrate ++// ++VOID rtl8192c_PHY_IQCalibrate( IN PADAPTER pAdapter , IN BOOLEAN bReCovery); ++ ++// ++// LC calibrate ++// ++VOID rtl8192c_PHY_LCCalibrate(IN PADAPTER pAdapter); ++ ++// ++// AP calibrate ++// ++VOID rtl8192c_PHY_APCalibrate(IN PADAPTER pAdapter, IN char delta); ++ ++VOID rtl8192c_PHY_SetRFPathSwitch(IN PADAPTER pAdapter, IN BOOLEAN bMain); ++ ++// ++// Modify the value of the hw register when beacon interval be changed. ++// ++void ++rtl8192c_PHY_SetBeaconHwReg( IN PADAPTER Adapter, ++ IN u16 BeaconInterval ); ++ ++ ++extern VOID ++PHY_SwitchEphyParameter( ++ IN PADAPTER Adapter ++ ); ++ ++extern VOID ++PHY_EnableHostClkReq( ++ IN PADAPTER Adapter ++ ); ++ ++BOOLEAN ++SetAntennaConfig92C( ++ IN PADAPTER Adapter, ++ IN u8 DefaultAnt ++ ); ++ ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++#define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8192c_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask)) ++#define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8192c_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data)) ++#define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8192c_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask)) ++#define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8192c_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data)) ++ ++#define PHY_SetMacReg PHY_SetBBReg ++ ++#endif // __INC_HAL8192CPHYCFG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyReg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyReg.h +new file mode 100644 +index 000000000000..746326edbf11 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CPhyReg.h +@@ -0,0 +1,1122 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/***************************************************************************** ++ * ++ * Module: __INC_HAL8192CPHYREG_H ++ * ++ * ++ * Note: 1. Define PMAC/BB register map ++ * 2. Define RF register map ++ * 3. PMAC/BB register bit mask. ++ * 4. RF reg bit mask. ++ * 5. Other BB/RF relative definition. ++ * ++ * ++ * Export: Constants, macro, functions(API), global variables(None). ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. ++ * 2. Reorganize code architecture. ++ * 09/25/2008 MH 1. Add RL6052 register definition ++ * ++ *****************************************************************************/ ++#ifndef __INC_HAL8192CPHYREG_H ++#define __INC_HAL8192CPHYREG_H ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++//============================================================ ++// 8192S Regsiter offset definition ++//============================================================ ++ ++// ++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 ++// 3. RF register 0x00-2E ++// 4. Bit Mask for BB/RF register ++// 5. Other defintion for BB/RF R/W ++// ++ ++ ++// ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 1. Page1(0x100) ++// ++#define rPMAC_Reset 0x100 ++#define rPMAC_TxStart 0x104 ++#define rPMAC_TxLegacySIG 0x108 ++#define rPMAC_TxHTSIG1 0x10c ++#define rPMAC_TxHTSIG2 0x110 ++#define rPMAC_PHYDebug 0x114 ++#define rPMAC_TxPacketNum 0x118 ++#define rPMAC_TxIdle 0x11c ++#define rPMAC_TxMACHeader0 0x120 ++#define rPMAC_TxMACHeader1 0x124 ++#define rPMAC_TxMACHeader2 0x128 ++#define rPMAC_TxMACHeader3 0x12c ++#define rPMAC_TxMACHeader4 0x130 ++#define rPMAC_TxMACHeader5 0x134 ++#define rPMAC_TxDataType 0x138 ++#define rPMAC_TxRandomSeed 0x13c ++#define rPMAC_CCKPLCPPreamble 0x140 ++#define rPMAC_CCKPLCPHeader 0x144 ++#define rPMAC_CCKCRC16 0x148 ++#define rPMAC_OFDMRxCRC32OK 0x170 ++#define rPMAC_OFDMRxCRC32Er 0x174 ++#define rPMAC_OFDMRxParityEr 0x178 ++#define rPMAC_OFDMRxCRC8Er 0x17c ++#define rPMAC_CCKCRxRC16Er 0x180 ++#define rPMAC_CCKCRxRC32Er 0x184 ++#define rPMAC_CCKCRxRC32OK 0x188 ++#define rPMAC_TxStatus 0x18c ++ ++// ++// 2. Page2(0x200) ++// ++// The following two definition are only used for USB interface. ++#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address. ++#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data. ++ ++// ++// 3. Page8(0x800) ++// ++#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting?? ++ ++#define rFPGA0_TxInfo 0x804 // Status report?? ++#define rFPGA0_PSDFunction 0x808 ++ ++#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain? ++ ++#define rFPGA0_RFTiming1 0x810 // Useless now ++#define rFPGA0_RFTiming2 0x814 ++ ++#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register ++#define rFPGA0_XA_HSSIParameter2 0x824 ++#define rFPGA0_XB_HSSIParameter1 0x828 ++#define rFPGA0_XB_HSSIParameter2 0x82c ++#define rTxAGC_B_Rate18_06 0x830 ++#define rTxAGC_B_Rate54_24 0x834 ++#define rTxAGC_B_CCK1_55_Mcs32 0x838 ++#define rTxAGC_B_Mcs03_Mcs00 0x83c ++ ++#define rTxAGC_B_Mcs07_Mcs04 0x848 ++#define rTxAGC_B_Mcs11_Mcs08 0x84c ++ ++#define rFPGA0_XA_LSSIParameter 0x840 ++#define rFPGA0_XB_LSSIParameter 0x844 ++ ++#define rFPGA0_RFWakeUpParameter 0x850 // Useless now ++#define rFPGA0_RFSleepUpParameter 0x854 ++ ++#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch ++#define rFPGA0_XCD_SwitchControl 0x85c ++ ++#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch ++#define rFPGA0_XB_RFInterfaceOE 0x864 ++ ++#define rTxAGC_B_Mcs15_Mcs12 0x868 ++#define rTxAGC_B_CCK11_A_CCK2_11 0x86c ++ ++#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control ++#define rFPGA0_XCD_RFInterfaceSW 0x874 ++ ++#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter ++#define rFPGA0_XCD_RFParameter 0x87c ++ ++#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4?? ++#define rFPGA0_AnalogParameter2 0x884 ++#define rFPGA0_AnalogParameter3 0x888 // Useless now ++#define rFPGA0_AnalogParameter4 0x88c ++ ++#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback ++#define rFPGA0_XB_LSSIReadBack 0x8a4 ++#define rFPGA0_XC_LSSIReadBack 0x8a8 ++#define rFPGA0_XD_LSSIReadBack 0x8ac ++ ++#define rFPGA0_PSDReport 0x8b4 // Useless now ++#define TransceiverA_HSPI_Readback 0x8b8 // Transceiver A HSPI Readback ++#define TransceiverB_HSPI_Readback 0x8bc // Transceiver B HSPI Readback ++#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value ++#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now ++ ++// ++// 4. Page9(0x900) ++// ++#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting?? ++ ++#define rFPGA1_TxBlock 0x904 // Useless now ++#define rFPGA1_DebugSelect 0x908 // Useless now ++#define rFPGA1_TxInfo 0x90c // Useless now // Status report?? ++ ++// ++// 5. PageA(0xA00) ++// ++// Set Control channel to upper or lower. These settings are required only for 40MHz ++#define rCCK0_System 0xa00 ++ ++#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI ++#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain ++ ++#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series ++#define rCCK0_RxAGC2 0xa10 //AGC & DAGC ++ ++#define rCCK0_RxHP 0xa14 ++ ++#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold ++#define rCCK0_DSPParameter2 0xa1c //SQ threshold ++ ++#define rCCK0_TxFilter1 0xa20 ++#define rCCK0_TxFilter2 0xa24 ++#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 ++#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report ++#define rCCK0_TRSSIReport 0xa50 ++#define rCCK0_RxReport 0xa54 //0xa57 ++#define rCCK0_FACounterLower 0xa5c //0xa5b ++#define rCCK0_FACounterUpper 0xa58 //0xa5c ++ ++// ++// PageB(0xB00) ++// ++#define rPdp_AntA 0xb00 ++#define rPdp_AntA_4 0xb04 ++#define rConfig_Pmpd_AntA 0xb28 ++#define rConfig_AntA 0xb68 ++#define rConfig_AntB 0xb6c ++#define rPdp_AntB 0xb70 ++#define rPdp_AntB_4 0xb74 ++#define rConfig_Pmpd_AntB 0xb98 ++#define rAPK 0xbd8 ++ ++// ++// 6. PageC(0xC00) ++// ++#define rOFDM0_LSTF 0xc00 ++ ++#define rOFDM0_TRxPathEnable 0xc04 ++#define rOFDM0_TRMuxPar 0xc08 ++#define rOFDM0_TRSWIsolation 0xc0c ++ ++#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter ++#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix ++#define rOFDM0_XBRxAFE 0xc18 ++#define rOFDM0_XBRxIQImbalance 0xc1c ++#define rOFDM0_XCRxAFE 0xc20 ++#define rOFDM0_XCRxIQImbalance 0xc24 ++#define rOFDM0_XDRxAFE 0xc28 ++#define rOFDM0_XDRxIQImbalance 0xc2c ++ ++#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain ++#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. ++#define rOFDM0_RxDetector3 0xc38 //Frame Sync. ++#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI ++ ++#define rOFDM0_RxDSP 0xc40 //Rx Sync Path ++#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC ++#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold ++#define rOFDM0_ECCAThreshold 0xc4c // energy CCA ++ ++#define rOFDM0_XAAGCCore1 0xc50 // DIG ++#define rOFDM0_XAAGCCore2 0xc54 ++#define rOFDM0_XBAGCCore1 0xc58 ++#define rOFDM0_XBAGCCore2 0xc5c ++#define rOFDM0_XCAGCCore1 0xc60 ++#define rOFDM0_XCAGCCore2 0xc64 ++#define rOFDM0_XDAGCCore1 0xc68 ++#define rOFDM0_XDAGCCore2 0xc6c ++ ++#define rOFDM0_AGCParameter1 0xc70 ++#define rOFDM0_AGCParameter2 0xc74 ++#define rOFDM0_AGCRSSITable 0xc78 ++#define rOFDM0_HTSTFAGC 0xc7c ++ ++#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG ++#define rOFDM0_XATxAFE 0xc84 ++#define rOFDM0_XBTxIQImbalance 0xc88 ++#define rOFDM0_XBTxAFE 0xc8c ++#define rOFDM0_XCTxIQImbalance 0xc90 ++#define rOFDM0_XCTxAFE 0xc94 ++#define rOFDM0_XDTxIQImbalance 0xc98 ++#define rOFDM0_XDTxAFE 0xc9c ++ ++#define rOFDM0_RxIQExtAnta 0xca0 ++#define rOFDM0_TxCoeff1 0xca4 ++#define rOFDM0_TxCoeff2 0xca8 ++#define rOFDM0_TxCoeff3 0xcac ++#define rOFDM0_TxCoeff4 0xcb0 ++#define rOFDM0_TxCoeff5 0xcb4 ++#define rOFDM0_TxCoeff6 0xcb8 ++#define rOFDM0_RxHPParameter 0xce0 ++#define rOFDM0_TxPseudoNoiseWgt 0xce4 ++#define rOFDM0_FrameSync 0xcf0 ++#define rOFDM0_DFSReport 0xcf4 ++ ++// ++// 7. PageD(0xD00) ++// ++#define rOFDM1_LSTF 0xd00 ++#define rOFDM1_TRxPathEnable 0xd04 ++ ++#define rOFDM1_CFO 0xd08 // No setting now ++#define rOFDM1_CSI1 0xd10 ++#define rOFDM1_SBD 0xd14 ++#define rOFDM1_CSI2 0xd18 ++#define rOFDM1_CFOTracking 0xd2c ++#define rOFDM1_TRxMesaure1 0xd34 ++#define rOFDM1_IntfDet 0xd3c ++#define rOFDM1_PseudoNoiseStateAB 0xd50 ++#define rOFDM1_PseudoNoiseStateCD 0xd54 ++#define rOFDM1_RxPseudoNoiseWgt 0xd58 ++ ++#define rOFDM_PHYCounter1 0xda0 //cca, parity fail ++#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail ++#define rOFDM_PHYCounter3 0xda8 //MCS not support ++ ++#define rOFDM_ShortCFOAB 0xdac // No setting now ++#define rOFDM_ShortCFOCD 0xdb0 ++#define rOFDM_LongCFOAB 0xdb4 ++#define rOFDM_LongCFOCD 0xdb8 ++#define rOFDM_TailCFOAB 0xdbc ++#define rOFDM_TailCFOCD 0xdc0 ++#define rOFDM_PWMeasure1 0xdc4 ++#define rOFDM_PWMeasure2 0xdc8 ++#define rOFDM_BWReport 0xdcc ++#define rOFDM_AGCReport 0xdd0 ++#define rOFDM_RxSNR 0xdd4 ++#define rOFDM_RxEVMCSI 0xdd8 ++#define rOFDM_SIGReport 0xddc ++ ++ ++// ++// 8. PageE(0xE00) ++// ++#define rTxAGC_A_Rate18_06 0xe00 ++#define rTxAGC_A_Rate54_24 0xe04 ++#define rTxAGC_A_CCK1_Mcs32 0xe08 ++#define rTxAGC_A_Mcs03_Mcs00 0xe10 ++#define rTxAGC_A_Mcs07_Mcs04 0xe14 ++#define rTxAGC_A_Mcs11_Mcs08 0xe18 ++#define rTxAGC_A_Mcs15_Mcs12 0xe1c ++ ++#define rFPGA0_IQK 0xe28 ++#define rTx_IQK_Tone_A 0xe30 ++#define rRx_IQK_Tone_A 0xe34 ++#define rTx_IQK_PI_A 0xe38 ++#define rRx_IQK_PI_A 0xe3c ++ ++#define rTx_IQK 0xe40 ++#define rRx_IQK 0xe44 ++#define rIQK_AGC_Pts 0xe48 ++#define rIQK_AGC_Rsp 0xe4c ++#define rTx_IQK_Tone_B 0xe50 ++#define rRx_IQK_Tone_B 0xe54 ++#define rTx_IQK_PI_B 0xe58 ++#define rRx_IQK_PI_B 0xe5c ++#define rIQK_AGC_Cont 0xe60 ++ ++#define rBlue_Tooth 0xe6c ++#define rRx_Wait_CCA 0xe70 ++#define rTx_CCK_RFON 0xe74 ++#define rTx_CCK_BBON 0xe78 ++#define rTx_OFDM_RFON 0xe7c ++#define rTx_OFDM_BBON 0xe80 ++#define rTx_To_Rx 0xe84 ++#define rTx_To_Tx 0xe88 ++#define rRx_CCK 0xe8c ++ ++#define rTx_Power_Before_IQK_A 0xe94 ++#define rTx_Power_After_IQK_A 0xe9c ++ ++#define rRx_Power_Before_IQK_A 0xea0 ++#define rRx_Power_Before_IQK_A_2 0xea4 ++#define rRx_Power_After_IQK_A 0xea8 ++#define rRx_Power_After_IQK_A_2 0xeac ++ ++#define rTx_Power_Before_IQK_B 0xeb4 ++#define rTx_Power_After_IQK_B 0xebc ++ ++#define rRx_Power_Before_IQK_B 0xec0 ++#define rRx_Power_Before_IQK_B_2 0xec4 ++#define rRx_Power_After_IQK_B 0xec8 ++#define rRx_Power_After_IQK_B_2 0xecc ++ ++#define rRx_OFDM 0xed0 ++#define rRx_Wait_RIFS 0xed4 ++#define rRx_TO_Rx 0xed8 ++#define rStandby 0xedc ++#define rSleep 0xee0 ++#define rPMPD_ANAEN 0xeec ++ ++// ++// 7. RF Register 0x00-0x2E (RF 8256) ++// RF-0222D 0x00-3F ++// ++//Zebra1 ++#define rZebra1_HSSIEnable 0x0 // Useless now ++#define rZebra1_TRxEnable1 0x1 ++#define rZebra1_TRxEnable2 0x2 ++#define rZebra1_AGC 0x4 ++#define rZebra1_ChargePump 0x5 ++#define rZebra1_Channel 0x7 // RF channel switch ++ ++//#endif ++#define rZebra1_TxGain 0x8 // Useless now ++#define rZebra1_TxLPF 0x9 ++#define rZebra1_RxLPF 0xb ++#define rZebra1_RxHPFCorner 0xc ++ ++//Zebra4 ++#define rGlobalCtrl 0 // Useless now ++#define rRTL8256_TxLPF 19 ++#define rRTL8256_RxLPF 11 ++ ++//RTL8258 ++#define rRTL8258_TxLPF 0x11 // Useless now ++#define rRTL8258_RxLPF 0x13 ++#define rRTL8258_RSSILPF 0xa ++ ++// ++// RL6052 Register definition ++// ++#define RF_AC 0x00 // ++ ++#define RF_IQADJ_G1 0x01 // ++#define RF_IQADJ_G2 0x02 // ++#define RF_BS_PA_APSET_G1_G4 0x03 ++#define RF_BS_PA_APSET_G5_G8 0x04 ++#define RF_POW_TRSW 0x05 // ++ ++#define RF_GAIN_RX 0x06 // ++#define RF_GAIN_TX 0x07 // ++ ++#define RF_TXM_IDAC 0x08 // ++#define RF_IPA_G 0x09 // ++#define RF_TXBIAS_G 0x0A ++#define RF_TXPA_AG 0x0B ++#define RF_IPA_A 0x0C // ++#define RF_TXBIAS_A 0x0D ++#define RF_BS_PA_APSET_G9_G11 0x0E ++#define RF_BS_IQGEN 0x0F // ++ ++#define RF_MODE1 0x10 // ++#define RF_MODE2 0x11 // ++ ++#define RF_RX_AGC_HP 0x12 // ++#define RF_TX_AGC 0x13 // ++#define RF_BIAS 0x14 // ++#define RF_IPA 0x15 // ++#define RF_POW_ABILITY 0x17 // ++#define RF_MODE_AG 0x18 // ++#define rRfChannel 0x18 // RF channel and BW switch ++#define RF_CHNLBW 0x18 // RF channel and BW switch ++#define RF_TOP 0x19 // ++ ++#define RF_RX_G1 0x1A // ++#define RF_RX_G2 0x1B // ++ ++#define RF_RX_BB2 0x1C // ++#define RF_RX_BB1 0x1D // ++ ++#define RF_RCK1 0x1E // ++#define RF_RCK2 0x1F // ++ ++#define RF_TX_G1 0x20 // ++#define RF_TX_G2 0x21 // ++#define RF_TX_G3 0x22 // ++ ++#define RF_TX_BB1 0x23 // ++ ++#define RF_T_METER 0x24 // ++ ++#define RF_SYN_G1 0x25 // RF TX Power control ++#define RF_SYN_G2 0x26 // RF TX Power control ++#define RF_SYN_G3 0x27 // RF TX Power control ++#define RF_SYN_G4 0x28 // RF TX Power control ++#define RF_SYN_G5 0x29 // RF TX Power control ++#define RF_SYN_G6 0x2A // RF TX Power control ++#define RF_SYN_G7 0x2B // RF TX Power control ++#define RF_SYN_G8 0x2C // RF TX Power control ++ ++#define RF_RCK_OS 0x30 // RF TX PA control ++ ++#define RF_TXPA_G1 0x31 // RF TX PA control ++#define RF_TXPA_G2 0x32 // RF TX PA control ++#define RF_TXPA_G3 0x33 // RF TX PA control ++ ++// ++//Bit Mask ++// ++// 1. Page1(0x100) ++#define bBBResetB 0x100 // Useless now? ++#define bGlobalResetB 0x200 ++#define bOFDMTxStart 0x4 ++#define bCCKTxStart 0x8 ++#define bCRC32Debug 0x100 ++#define bPMACLoopback 0x10 ++#define bTxLSIG 0xffffff ++#define bOFDMTxRate 0xf ++#define bOFDMTxReserved 0x10 ++#define bOFDMTxLength 0x1ffe0 ++#define bOFDMTxParity 0x20000 ++#define bTxHTSIG1 0xffffff ++#define bTxHTMCSRate 0x7f ++#define bTxHTBW 0x80 ++#define bTxHTLength 0xffff00 ++#define bTxHTSIG2 0xffffff ++#define bTxHTSmoothing 0x1 ++#define bTxHTSounding 0x2 ++#define bTxHTReserved 0x4 ++#define bTxHTAggreation 0x8 ++#define bTxHTSTBC 0x30 ++#define bTxHTAdvanceCoding 0x40 ++#define bTxHTShortGI 0x80 ++#define bTxHTNumberHT_LTF 0x300 ++#define bTxHTCRC8 0x3fc00 ++#define bCounterReset 0x10000 ++#define bNumOfOFDMTx 0xffff ++#define bNumOfCCKTx 0xffff0000 ++#define bTxIdleInterval 0xffff ++#define bOFDMService 0xffff0000 ++#define bTxMACHeader 0xffffffff ++#define bTxDataInit 0xff ++#define bTxHTMode 0x100 ++#define bTxDataType 0x30000 ++#define bTxRandomSeed 0xffffffff ++#define bCCKTxPreamble 0x1 ++#define bCCKTxSFD 0xffff0000 ++#define bCCKTxSIG 0xff ++#define bCCKTxService 0xff00 ++#define bCCKLengthExt 0x8000 ++#define bCCKTxLength 0xffff0000 ++#define bCCKTxCRC16 0xffff ++#define bCCKTxStatus 0x1 ++#define bOFDMTxStatus 0x2 ++ ++#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff)) ++ ++// 2. Page8(0x800) ++#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD ++#define bJapanMode 0x2 ++#define bCCKTxSC 0x30 ++#define bCCKEn 0x1000000 ++#define bOFDMEn 0x2000000 ++ ++#define bOFDMRxADCPhase 0x10000 // Useless now ++#define bOFDMTxDACPhase 0x40000 ++#define bXATxAGC 0x3f ++ ++#define bAntennaSelect 0x0300 ++ ++#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage ++#define bXCTxAGC 0xf000 ++#define bXDTxAGC 0xf0000 ++ ++#define bPAStart 0xf0000000 // Useless now ++#define bTRStart 0x00f00000 ++#define bRFStart 0x0000f000 ++#define bBBStart 0x000000f0 ++#define bBBCCKStart 0x0000000f ++#define bPAEnd 0xf //Reg0x814 ++#define bTREnd 0x0f000000 ++#define bRFEnd 0x000f0000 ++#define bCCAMask 0x000000f0 //T2R ++#define bR2RCCAMask 0x00000f00 ++#define bHSSI_R2TDelay 0xf8000000 ++#define bHSSI_T2RDelay 0xf80000 ++#define bContTxHSSI 0x400 //chane gain at continue Tx ++#define bIGFromCCK 0x200 ++#define bAGCAddress 0x3f ++#define bRxHPTx 0x7000 ++#define bRxHPT2R 0x38000 ++#define bRxHPCCKIni 0xc0000 ++#define bAGCTxCode 0xc00000 ++#define bAGCRxCode 0x300000 ++ ++#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1 ++#define b3WireAddressLength 0x400 ++ ++#define b3WireRFPowerDown 0x1 // Useless now ++//#define bHWSISelect 0x8 ++#define b5GPAPEPolarity 0x40000000 ++#define b2GPAPEPolarity 0x80000000 ++#define bRFSW_TxDefaultAnt 0x3 ++#define bRFSW_TxOptionAnt 0x30 ++#define bRFSW_RxDefaultAnt 0x300 ++#define bRFSW_RxOptionAnt 0x3000 ++#define bRFSI_3WireData 0x1 ++#define bRFSI_3WireClock 0x2 ++#define bRFSI_3WireLoad 0x4 ++#define bRFSI_3WireRW 0x8 ++#define bRFSI_3Wire 0xf ++ ++#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW ++ ++#define bRFSI_TRSW 0x20 // Useless now ++#define bRFSI_TRSWB 0x40 ++#define bRFSI_ANTSW 0x100 ++#define bRFSI_ANTSWB 0x200 ++#define bRFSI_PAPE 0x400 ++#define bRFSI_PAPE5G 0x800 ++#define bBandSelect 0x1 ++#define bHTSIG2_GI 0x80 ++#define bHTSIG2_Smoothing 0x01 ++#define bHTSIG2_Sounding 0x02 ++#define bHTSIG2_Aggreaton 0x08 ++#define bHTSIG2_STBC 0x30 ++#define bHTSIG2_AdvCoding 0x40 ++#define bHTSIG2_NumOfHTLTF 0x300 ++#define bHTSIG2_CRC8 0x3fc ++#define bHTSIG1_MCS 0x7f ++#define bHTSIG1_BandWidth 0x80 ++#define bHTSIG1_HTLength 0xffff ++#define bLSIG_Rate 0xf ++#define bLSIG_Reserved 0x10 ++#define bLSIG_Length 0x1fffe ++#define bLSIG_Parity 0x20 ++#define bCCKRxPhase 0x4 ++ ++#define bLSSIReadAddress 0x7f800000 // T65 RF ++ ++#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal ++ ++#define bLSSIReadBackData 0xfffff // T65 RF ++ ++#define bLSSIReadOKFlag 0x1000 // Useless now ++#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz ++#define bRegulator0Standby 0x1 ++#define bRegulatorPLLStandby 0x2 ++#define bRegulator1Standby 0x4 ++#define bPLLPowerUp 0x8 ++#define bDPLLPowerUp 0x10 ++#define bDA10PowerUp 0x20 ++#define bAD7PowerUp 0x200 ++#define bDA6PowerUp 0x2000 ++#define bXtalPowerUp 0x4000 ++#define b40MDClkPowerUP 0x8000 ++#define bDA6DebugMode 0x20000 ++#define bDA6Swing 0x380000 ++ ++#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ ++ ++#define b80MClkDelay 0x18000000 // Useless ++#define bAFEWatchDogEnable 0x20000000 ++ ++#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap ++#define bXtalCap23 0x3 ++#define bXtalCap92x 0x0f000000 ++#define bXtalCap 0x0f000000 ++ ++#define bIntDifClkEnable 0x400 // Useless ++#define bExtSigClkEnable 0x800 ++#define bBandgapMbiasPowerUp 0x10000 ++#define bAD11SHGain 0xc0000 ++#define bAD11InputRange 0x700000 ++#define bAD11OPCurrent 0x3800000 ++#define bIPathLoopback 0x4000000 ++#define bQPathLoopback 0x8000000 ++#define bAFELoopback 0x10000000 ++#define bDA10Swing 0x7e0 ++#define bDA10Reverse 0x800 ++#define bDAClkSource 0x1000 ++#define bAD7InputRange 0x6000 ++#define bAD7Gain 0x38000 ++#define bAD7OutputCMMode 0x40000 ++#define bAD7InputCMMode 0x380000 ++#define bAD7Current 0xc00000 ++#define bRegulatorAdjust 0x7000000 ++#define bAD11PowerUpAtTx 0x1 ++#define bDA10PSAtTx 0x10 ++#define bAD11PowerUpAtRx 0x100 ++#define bDA10PSAtRx 0x1000 ++#define bCCKRxAGCFormat 0x200 ++#define bPSDFFTSamplepPoint 0xc000 ++#define bPSDAverageNum 0x3000 ++#define bIQPathControl 0xc00 ++#define bPSDFreq 0x3ff ++#define bPSDAntennaPath 0x30 ++#define bPSDIQSwitch 0x40 ++#define bPSDRxTrigger 0x400000 ++#define bPSDTxTrigger 0x80000000 ++#define bPSDSineToneScale 0x7f000000 ++#define bPSDReport 0xffff ++ ++// 3. Page9(0x900) ++#define bOFDMTxSC 0x30000000 // Useless ++#define bCCKTxOn 0x1 ++#define bOFDMTxOn 0x2 ++#define bDebugPage 0xfff //reset debug page and also HWord, LWord ++#define bDebugItem 0xff //reset debug page and LWord ++#define bAntL 0x10 ++#define bAntNonHT 0x100 ++#define bAntHT1 0x1000 ++#define bAntHT2 0x10000 ++#define bAntHT1S1 0x100000 ++#define bAntNonHTS1 0x1000000 ++ ++// 4. PageA(0xA00) ++#define bCCKBBMode 0x3 // Useless ++#define bCCKTxPowerSaving 0x80 ++#define bCCKRxPowerSaving 0x40 ++ ++#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch ++ ++#define bCCKScramble 0x8 // Useless ++#define bCCKAntDiversity 0x8000 ++#define bCCKCarrierRecovery 0x4000 ++#define bCCKTxRate 0x3000 ++#define bCCKDCCancel 0x0800 ++#define bCCKISICancel 0x0400 ++#define bCCKMatchFilter 0x0200 ++#define bCCKEqualizer 0x0100 ++#define bCCKPreambleDetect 0x800000 ++#define bCCKFastFalseCCA 0x400000 ++#define bCCKChEstStart 0x300000 ++#define bCCKCCACount 0x080000 ++#define bCCKcs_lim 0x070000 ++#define bCCKBistMode 0x80000000 ++#define bCCKCCAMask 0x40000000 ++#define bCCKTxDACPhase 0x4 ++#define bCCKRxADCPhase 0x20000000 //r_rx_clk ++#define bCCKr_cp_mode0 0x0100 ++#define bCCKTxDCOffset 0xf0 ++#define bCCKRxDCOffset 0xf ++#define bCCKCCAMode 0xc000 ++#define bCCKFalseCS_lim 0x3f00 ++#define bCCKCS_ratio 0xc00000 ++#define bCCKCorgBit_sel 0x300000 ++#define bCCKPD_lim 0x0f0000 ++#define bCCKNewCCA 0x80000000 ++#define bCCKRxHPofIG 0x8000 ++#define bCCKRxIG 0x7f00 ++#define bCCKLNAPolarity 0x800000 ++#define bCCKRx1stGain 0x7f0000 ++#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity ++#define bCCKRxAGCSatLevel 0x1f000000 ++#define bCCKRxAGCSatCount 0xe0 ++#define bCCKRxRFSettle 0x1f //AGCsamp_dly ++#define bCCKFixedRxAGC 0x8000 ++//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 ++#define bCCKAntennaPolarity 0x2000 ++#define bCCKTxFilterType 0x0c00 ++#define bCCKRxAGCReportType 0x0300 ++#define bCCKRxDAGCEn 0x80000000 ++#define bCCKRxDAGCPeriod 0x20000000 ++#define bCCKRxDAGCSatLevel 0x1f000000 ++#define bCCKTimingRecovery 0x800000 ++#define bCCKTxC0 0x3f0000 ++#define bCCKTxC1 0x3f000000 ++#define bCCKTxC2 0x3f ++#define bCCKTxC3 0x3f00 ++#define bCCKTxC4 0x3f0000 ++#define bCCKTxC5 0x3f000000 ++#define bCCKTxC6 0x3f ++#define bCCKTxC7 0x3f00 ++#define bCCKDebugPort 0xff0000 ++#define bCCKDACDebug 0x0f000000 ++#define bCCKFalseAlarmEnable 0x8000 ++#define bCCKFalseAlarmRead 0x4000 ++#define bCCKTRSSI 0x7f ++#define bCCKRxAGCReport 0xfe ++#define bCCKRxReport_AntSel 0x80000000 ++#define bCCKRxReport_MFOff 0x40000000 ++#define bCCKRxRxReport_SQLoss 0x20000000 ++#define bCCKRxReport_Pktloss 0x10000000 ++#define bCCKRxReport_Lockedbit 0x08000000 ++#define bCCKRxReport_RateError 0x04000000 ++#define bCCKRxReport_RxRate 0x03000000 ++#define bCCKRxFACounterLower 0xff ++#define bCCKRxFACounterUpper 0xff000000 ++#define bCCKRxHPAGCStart 0xe000 ++#define bCCKRxHPAGCFinal 0x1c00 ++#define bCCKRxFalseAlarmEnable 0x8000 ++#define bCCKFACounterFreeze 0x4000 ++#define bCCKTxPathSel 0x10000000 ++#define bCCKDefaultRxPath 0xc000000 ++#define bCCKOptionRxPath 0x3000000 ++ ++// 5. PageC(0xC00) ++#define bNumOfSTF 0x3 // Useless ++#define bShift_L 0xc0 ++#define bGI_TH 0xc ++#define bRxPathA 0x1 ++#define bRxPathB 0x2 ++#define bRxPathC 0x4 ++#define bRxPathD 0x8 ++#define bTxPathA 0x1 ++#define bTxPathB 0x2 ++#define bTxPathC 0x4 ++#define bTxPathD 0x8 ++#define bTRSSIFreq 0x200 ++#define bADCBackoff 0x3000 ++#define bDFIRBackoff 0xc000 ++#define bTRSSILatchPhase 0x10000 ++#define bRxIDCOffset 0xff ++#define bRxQDCOffset 0xff00 ++#define bRxDFIRMode 0x1800000 ++#define bRxDCNFType 0xe000000 ++#define bRXIQImb_A 0x3ff ++#define bRXIQImb_B 0xfc00 ++#define bRXIQImb_C 0x3f0000 ++#define bRXIQImb_D 0xffc00000 ++#define bDC_dc_Notch 0x60000 ++#define bRxNBINotch 0x1f000000 ++#define bPD_TH 0xf ++#define bPD_TH_Opt2 0xc000 ++#define bPWED_TH 0x700 ++#define bIfMF_Win_L 0x800 ++#define bPD_Option 0x1000 ++#define bMF_Win_L 0xe000 ++#define bBW_Search_L 0x30000 ++#define bwin_enh_L 0xc0000 ++#define bBW_TH 0x700000 ++#define bED_TH2 0x3800000 ++#define bBW_option 0x4000000 ++#define bRatio_TH 0x18000000 ++#define bWindow_L 0xe0000000 ++#define bSBD_Option 0x1 ++#define bFrame_TH 0x1c ++#define bFS_Option 0x60 ++#define bDC_Slope_check 0x80 ++#define bFGuard_Counter_DC_L 0xe00 ++#define bFrame_Weight_Short 0x7000 ++#define bSub_Tune 0xe00000 ++#define bFrame_DC_Length 0xe000000 ++#define bSBD_start_offset 0x30000000 ++#define bFrame_TH_2 0x7 ++#define bFrame_GI2_TH 0x38 ++#define bGI2_Sync_en 0x40 ++#define bSarch_Short_Early 0x300 ++#define bSarch_Short_Late 0xc00 ++#define bSarch_GI2_Late 0x70000 ++#define bCFOAntSum 0x1 ++#define bCFOAcc 0x2 ++#define bCFOStartOffset 0xc ++#define bCFOLookBack 0x70 ++#define bCFOSumWeight 0x80 ++#define bDAGCEnable 0x10000 ++#define bTXIQImb_A 0x3ff ++#define bTXIQImb_B 0xfc00 ++#define bTXIQImb_C 0x3f0000 ++#define bTXIQImb_D 0xffc00000 ++#define bTxIDCOffset 0xff ++#define bTxQDCOffset 0xff00 ++#define bTxDFIRMode 0x10000 ++#define bTxPesudoNoiseOn 0x4000000 ++#define bTxPesudoNoise_A 0xff ++#define bTxPesudoNoise_B 0xff00 ++#define bTxPesudoNoise_C 0xff0000 ++#define bTxPesudoNoise_D 0xff000000 ++#define bCCADropOption 0x20000 ++#define bCCADropThres 0xfff00000 ++#define bEDCCA_H 0xf ++#define bEDCCA_L 0xf0 ++#define bLambda_ED 0x300 ++#define bRxInitialGain 0x7f ++#define bRxAntDivEn 0x80 ++#define bRxAGCAddressForLNA 0x7f00 ++#define bRxHighPowerFlow 0x8000 ++#define bRxAGCFreezeThres 0xc0000 ++#define bRxFreezeStep_AGC1 0x300000 ++#define bRxFreezeStep_AGC2 0xc00000 ++#define bRxFreezeStep_AGC3 0x3000000 ++#define bRxFreezeStep_AGC0 0xc000000 ++#define bRxRssi_Cmp_En 0x10000000 ++#define bRxQuickAGCEn 0x20000000 ++#define bRxAGCFreezeThresMode 0x40000000 ++#define bRxOverFlowCheckType 0x80000000 ++#define bRxAGCShift 0x7f ++#define bTRSW_Tri_Only 0x80 ++#define bPowerThres 0x300 ++#define bRxAGCEn 0x1 ++#define bRxAGCTogetherEn 0x2 ++#define bRxAGCMin 0x4 ++#define bRxHP_Ini 0x7 ++#define bRxHP_TRLNA 0x70 ++#define bRxHP_RSSI 0x700 ++#define bRxHP_BBP1 0x7000 ++#define bRxHP_BBP2 0x70000 ++#define bRxHP_BBP3 0x700000 ++#define bRSSI_H 0x7f0000 //the threshold for high power ++#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity ++#define bRxSettle_TRSW 0x7 ++#define bRxSettle_LNA 0x38 ++#define bRxSettle_RSSI 0x1c0 ++#define bRxSettle_BBP 0xe00 ++#define bRxSettle_RxHP 0x7000 ++#define bRxSettle_AntSW_RSSI 0x38000 ++#define bRxSettle_AntSW 0xc0000 ++#define bRxProcessTime_DAGC 0x300000 ++#define bRxSettle_HSSI 0x400000 ++#define bRxProcessTime_BBPPW 0x800000 ++#define bRxAntennaPowerShift 0x3000000 ++#define bRSSITableSelect 0xc000000 ++#define bRxHP_Final 0x7000000 ++#define bRxHTSettle_BBP 0x7 ++#define bRxHTSettle_HSSI 0x8 ++#define bRxHTSettle_RxHP 0x70 ++#define bRxHTSettle_BBPPW 0x80 ++#define bRxHTSettle_Idle 0x300 ++#define bRxHTSettle_Reserved 0x1c00 ++#define bRxHTRxHPEn 0x8000 ++#define bRxHTAGCFreezeThres 0x30000 ++#define bRxHTAGCTogetherEn 0x40000 ++#define bRxHTAGCMin 0x80000 ++#define bRxHTAGCEn 0x100000 ++#define bRxHTDAGCEn 0x200000 ++#define bRxHTRxHP_BBP 0x1c00000 ++#define bRxHTRxHP_Final 0xe0000000 ++#define bRxPWRatioTH 0x3 ++#define bRxPWRatioEn 0x4 ++#define bRxMFHold 0x3800 ++#define bRxPD_Delay_TH1 0x38 ++#define bRxPD_Delay_TH2 0x1c0 ++#define bRxPD_DC_COUNT_MAX 0x600 ++//#define bRxMF_Hold 0x3800 ++#define bRxPD_Delay_TH 0x8000 ++#define bRxProcess_Delay 0xf0000 ++#define bRxSearchrange_GI2_Early 0x700000 ++#define bRxFrame_Guard_Counter_L 0x3800000 ++#define bRxSGI_Guard_L 0xc000000 ++#define bRxSGI_Search_L 0x30000000 ++#define bRxSGI_TH 0xc0000000 ++#define bDFSCnt0 0xff ++#define bDFSCnt1 0xff00 ++#define bDFSFlag 0xf0000 ++#define bMFWeightSum 0x300000 ++#define bMinIdxTH 0x7f000000 ++#define bDAFormat 0x40000 ++#define bTxChEmuEnable 0x01000000 ++#define bTRSWIsolation_A 0x7f ++#define bTRSWIsolation_B 0x7f00 ++#define bTRSWIsolation_C 0x7f0000 ++#define bTRSWIsolation_D 0x7f000000 ++#define bExtLNAGain 0x7c00 ++ ++// 6. PageE(0xE00) ++#define bSTBCEn 0x4 // Useless ++#define bAntennaMapping 0x10 ++#define bNss 0x20 ++#define bCFOAntSumD 0x200 ++#define bPHYCounterReset 0x8000000 ++#define bCFOReportGet 0x4000000 ++#define bOFDMContinueTx 0x10000000 ++#define bOFDMSingleCarrier 0x20000000 ++#define bOFDMSingleTone 0x40000000 ++//#define bRxPath1 0x01 ++//#define bRxPath2 0x02 ++//#define bRxPath3 0x04 ++//#define bRxPath4 0x08 ++//#define bTxPath1 0x10 ++//#define bTxPath2 0x20 ++#define bHTDetect 0x100 ++#define bCFOEn 0x10000 ++#define bCFOValue 0xfff00000 ++#define bSigTone_Re 0x3f ++#define bSigTone_Im 0x7f00 ++#define bCounter_CCA 0xffff ++#define bCounter_ParityFail 0xffff0000 ++#define bCounter_RateIllegal 0xffff ++#define bCounter_CRC8Fail 0xffff0000 ++#define bCounter_MCSNoSupport 0xffff ++#define bCounter_FastSync 0xffff ++#define bShortCFO 0xfff ++#define bShortCFOTLength 12 //total ++#define bShortCFOFLength 11 //fraction ++#define bLongCFO 0x7ff ++#define bLongCFOTLength 11 ++#define bLongCFOFLength 11 ++#define bTailCFO 0x1fff ++#define bTailCFOTLength 13 ++#define bTailCFOFLength 12 ++#define bmax_en_pwdB 0xffff ++#define bCC_power_dB 0xffff0000 ++#define bnoise_pwdB 0xffff ++#define bPowerMeasTLength 10 ++#define bPowerMeasFLength 3 ++#define bRx_HT_BW 0x1 ++#define bRxSC 0x6 ++#define bRx_HT 0x8 ++#define bNB_intf_det_on 0x1 ++#define bIntf_win_len_cfg 0x30 ++#define bNB_Intf_TH_cfg 0x1c0 ++#define bRFGain 0x3f ++#define bTableSel 0x40 ++#define bTRSW 0x80 ++#define bRxSNR_A 0xff ++#define bRxSNR_B 0xff00 ++#define bRxSNR_C 0xff0000 ++#define bRxSNR_D 0xff000000 ++#define bSNREVMTLength 8 ++#define bSNREVMFLength 1 ++#define bCSI1st 0xff ++#define bCSI2nd 0xff00 ++#define bRxEVM1st 0xff0000 ++#define bRxEVM2nd 0xff000000 ++#define bSIGEVM 0xff ++#define bPWDB 0xff00 ++#define bSGIEN 0x10000 ++ ++#define bSFactorQAM1 0xf // Useless ++#define bSFactorQAM2 0xf0 ++#define bSFactorQAM3 0xf00 ++#define bSFactorQAM4 0xf000 ++#define bSFactorQAM5 0xf0000 ++#define bSFactorQAM6 0xf0000 ++#define bSFactorQAM7 0xf00000 ++#define bSFactorQAM8 0xf000000 ++#define bSFactorQAM9 0xf0000000 ++#define bCSIScheme 0x100000 ++ ++#define bNoiseLvlTopSet 0x3 // Useless ++#define bChSmooth 0x4 ++#define bChSmoothCfg1 0x38 ++#define bChSmoothCfg2 0x1c0 ++#define bChSmoothCfg3 0xe00 ++#define bChSmoothCfg4 0x7000 ++#define bMRCMode 0x800000 ++#define bTHEVMCfg 0x7000000 ++ ++#define bLoopFitType 0x1 // Useless ++#define bUpdCFO 0x40 ++#define bUpdCFOOffData 0x80 ++#define bAdvUpdCFO 0x100 ++#define bAdvTimeCtrl 0x800 ++#define bUpdClko 0x1000 ++#define bFC 0x6000 ++#define bTrackingMode 0x8000 ++#define bPhCmpEnable 0x10000 ++#define bUpdClkoLTF 0x20000 ++#define bComChCFO 0x40000 ++#define bCSIEstiMode 0x80000 ++#define bAdvUpdEqz 0x100000 ++#define bUChCfg 0x7000000 ++#define bUpdEqz 0x8000000 ++ ++//Rx Pseduo noise ++#define bRxPesudoNoiseOn 0x20000000 // Useless ++#define bRxPesudoNoise_A 0xff ++#define bRxPesudoNoise_B 0xff00 ++#define bRxPesudoNoise_C 0xff0000 ++#define bRxPesudoNoise_D 0xff000000 ++#define bPesudoNoiseState_A 0xffff ++#define bPesudoNoiseState_B 0xffff0000 ++#define bPesudoNoiseState_C 0xffff ++#define bPesudoNoiseState_D 0xffff0000 ++ ++//7. RF Register ++//Zebra1 ++#define bZebra1_HSSIEnable 0x8 // Useless ++#define bZebra1_TRxControl 0xc00 ++#define bZebra1_TRxGainSetting 0x07f ++#define bZebra1_RxCorner 0xc00 ++#define bZebra1_TxChargePump 0x38 ++#define bZebra1_RxChargePump 0x7 ++#define bZebra1_ChannelNum 0xf80 ++#define bZebra1_TxLPFBW 0x400 ++#define bZebra1_RxLPFBW 0x600 ++ ++//Zebra4 ++#define bRTL8256RegModeCtrl1 0x100 // Useless ++#define bRTL8256RegModeCtrl0 0x40 ++#define bRTL8256_TxLPFBW 0x18 ++#define bRTL8256_RxLPFBW 0x600 ++ ++//RTL8258 ++#define bRTL8258_TxLPFBW 0xc // Useless ++#define bRTL8258_RxLPFBW 0xc00 ++#define bRTL8258_RSSILPFBW 0xc0 ++ ++ ++// ++// Other Definition ++// ++ ++//byte endable for sb_write ++#define bByte0 0x1 // Useless ++#define bByte1 0x2 ++#define bByte2 0x4 ++#define bByte3 0x8 ++#define bWord0 0x3 ++#define bWord1 0xc ++#define bDWord 0xf ++ ++//for PutRegsetting & GetRegSetting BitMask ++#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f ++#define bMaskByte1 0xff00 ++#define bMaskByte2 0xff0000 ++#define bMaskByte3 0xff000000 ++#define bMaskHWord 0xffff0000 ++#define bMaskLWord 0x0000ffff ++#define bMaskDWord 0xffffffff ++#define bMask12Bits 0xfff ++#define bMaskH4Bits 0xf0000000 ++#define bMaskOFDM_D 0xffc00000 ++#define bMaskCCK 0x3f3f3f3f ++ ++//for PutRFRegsetting & GetRFRegSetting BitMask ++//#define bMask12Bits 0xfffff // RF Reg mask bits ++//#define bMask20Bits 0xfffff // RF Reg mask bits T65 RF ++#define bRFRegOffsetMask 0xfffff ++ ++#define bEnable 0x1 // Useless ++#define bDisable 0x0 ++ ++#define LeftAntenna 0x0 // Useless ++#define RightAntenna 0x1 ++ ++#define tCheckTxStatus 500 //500ms // Useless ++#define tUpdateRxCounter 100 //100ms ++ ++#define rateCCK 0 // Useless ++#define rateOFDM 1 ++#define rateHT 2 ++ ++//define Register-End ++#define bPMAC_End 0x1ff // Useless ++#define bFPGAPHY0_End 0x8ff ++#define bFPGAPHY1_End 0x9ff ++#define bCCKPHY0_End 0xaff ++#define bOFDMPHY0_End 0xcff ++#define bOFDMPHY1_End 0xdff ++ ++//define max debug item in each debug page ++//#define bMaxItem_FPGA_PHY0 0x9 ++//#define bMaxItem_FPGA_PHY1 0x3 ++//#define bMaxItem_PHY_11B 0x16 ++//#define bMaxItem_OFDM_PHY0 0x29 ++//#define bMaxItem_OFDM_PHY1 0x0 ++ ++#define bPMACControl 0x0 // Useless ++#define bWMACControl 0x1 ++#define bWNICControl 0x2 ++ ++#define PathA 0x0 // Useless ++#define PathB 0x1 ++#define PathC 0x2 ++#define PathD 0x3 ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++#endif //__INC_HAL8192SPHYREG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg.h +new file mode 100644 +index 000000000000..cafea7bb3f03 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg.h +@@ -0,0 +1,105 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192CU_FW_IMG_H ++#define __INC_HAL8192CU_FW_IMG_H ++ ++/*Created on 2011/ 6/15, 5:45*/ ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define TSMCImgArrayLength 15706 //v84 TSMC COMMON 2012-04-13 ++#else //#ifdef CONFIG_P2P ++#define TSMCImgArrayLength 16126 //v88 TSMC P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength]; ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define UMCACutImgArrayLength 16248 //v79 UMC A Cut COMMON 2011-10-06 ++#else //#ifdef CONFIG_P2P ++#define UMCACutImgArrayLength 16126 //v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength]; ++ ++#ifdef CONFIG_BT_COEXISTENCE ++#define UMCBCutImgArrayLength 15686 //v84 UMC B Cut COMMON 2012-04-13 ++#else //#ifdef CONFIG_P2P ++#define UMCBCutImgArrayLength 16096 //v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05 ++#endif ++extern u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength]; ++ ++//8188C_Formal_All_PHYforMP_111117 2011-11-23 ++//8192C_Formal_92CU_PHYforMP_110817 2011-11-23 ++#define PHY_REG_2TArrayLength 374 ++extern u32 Rtl8192CUPHY_REG_2TArray[PHY_REG_2TArrayLength]; ++#define PHY_REG_1TArrayLength 374 ++extern u32 Rtl8192CUPHY_REG_1TArray[PHY_REG_1TArrayLength]; ++#define PHY_ChangeTo_1T1RArrayLength 1 ++extern u32 Rtl8192CUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength]; ++#define PHY_ChangeTo_1T2RArrayLength 1 ++extern u32 Rtl8192CUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength]; ++#define PHY_ChangeTo_2T2RArrayLength 1 ++extern u32 Rtl8192CUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength]; ++#define PHY_REG_Array_PGLength 336 ++extern u32 Rtl8192CUPHY_REG_Array_PG[PHY_REG_Array_PGLength]; ++#define PHY_REG_Array_PG_mCardLength 336 ++extern u32 Rtl8192CUPHY_REG_Array_PG_mCard[PHY_REG_Array_PG_mCardLength]; ++#define PHY_REG_Array_MPLength 4 ++extern u32 Rtl8192CUPHY_REG_Array_MP[PHY_REG_Array_MPLength]; ++#define PHY_REG_1T_HPArrayLength 378 ++extern u32 Rtl8192CUPHY_REG_1T_HPArray[PHY_REG_1T_HPArrayLength]; ++#define PHY_REG_1T_mCardArrayLength 374 ++extern u32 Rtl8192CUPHY_REG_1T_mCardArray[PHY_REG_1T_mCardArrayLength]; ++#define PHY_REG_2T_mCardArrayLength 374 ++extern u32 Rtl8192CUPHY_REG_2T_mCardArray[PHY_REG_2T_mCardArrayLength]; ++#define PHY_REG_Array_PG_HPLength 336 ++extern u32 Rtl8192CUPHY_REG_Array_PG_HP[PHY_REG_Array_PG_HPLength]; ++#define RadioA_2TArrayLength 282 ++extern u32 Rtl8192CURadioA_2TArray[RadioA_2TArrayLength]; ++#define RadioB_2TArrayLength 78 ++extern u32 Rtl8192CURadioB_2TArray[RadioB_2TArrayLength]; ++#define RadioA_1TArrayLength 282 ++extern u32 Rtl8192CURadioA_1TArray[RadioA_1TArrayLength]; ++#define RadioB_1TArrayLength 1 ++extern u32 Rtl8192CURadioB_1TArray[RadioB_1TArrayLength]; ++#define RadioA_2T_mCardArrayLength 282 ++extern u32 Rtl8192CURadioA_2T_mCardArray[RadioA_2T_mCardArrayLength]; ++#define RadioB_2T_mCardArrayLength 78 ++extern u32 Rtl8192CURadioB_2T_mCardArray[RadioB_2T_mCardArrayLength]; ++#define RadioA_1T_mCardArrayLength 282 ++extern u32 Rtl8192CURadioA_1T_mCardArray[RadioA_1T_mCardArrayLength]; ++#define RadioB_1T_mCardArrayLength 1 ++extern u32 Rtl8192CURadioB_1T_mCardArray[RadioB_1T_mCardArrayLength]; ++#define RadioA_1T_HPArrayLength 282 ++extern u32 Rtl8192CURadioA_1T_HPArray[RadioA_1T_HPArrayLength]; ++#define RadioB_GM_ArrayLength 1 ++extern u32 Rtl8192CURadioB_GM_Array[RadioB_GM_ArrayLength]; ++ ++// MAC reg V14 - 2011-11-23 ++#define MAC_2T_ArrayLength 174 ++extern u32 Rtl8192CUMAC_2T_Array[MAC_2T_ArrayLength]; ++#define MACPHY_Array_PGLength 1 ++extern u32 Rtl8192CUMACPHY_Array_PG[MACPHY_Array_PGLength]; ++#define AGCTAB_2TArrayLength 320 ++extern u32 Rtl8192CUAGCTAB_2TArray[AGCTAB_2TArrayLength]; ++#define AGCTAB_1TArrayLength 320 ++extern u32 Rtl8192CUAGCTAB_1TArray[AGCTAB_1TArrayLength]; ++#define AGCTAB_1T_HPArrayLength 320 ++extern u32 Rtl8192CUAGCTAB_1T_HPArray[AGCTAB_1T_HPArrayLength]; ++ ++#endif //__INC_HAL8192CU_FW_IMG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg_wowlan.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg_wowlan.h +new file mode 100644 +index 000000000000..6e18fbceed8e +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192CUHWImg_wowlan.h +@@ -0,0 +1,33 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192CU_FW_IMG_WOWLAN_H ++#define __INC_HAL8192CU_FW_IMG_WOWLAN_H ++ ++/*Created on 2011/11/ 8, 14:15*/ ++ ++ ++#define TSMCWWImgArrayLength 13458 ++extern u8 Rtl8192CUFwTSMCWWImgArray[TSMCWWImgArrayLength]; ++#define UMCACutWWImgArrayLength 13458 ++extern u8 Rtl8192CUFwUMCACutWWImgArray[UMCACutWWImgArrayLength]; ++#define UMCBCutWWImgArrayLength 13446 ++extern u8 Rtl8192CUFwUMCBCutWWImgArray[UMCBCutWWImgArrayLength]; ++ ++#endif //__INC_HAL8192CU_FW_IMG_WOWLAN_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DEHWImg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DEHWImg.h +new file mode 100644 +index 000000000000..55998c212e9c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DEHWImg.h +@@ -0,0 +1,66 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192DE_FW_IMG_H ++#define __INC_HAL8192DE_FW_IMG_H ++ ++#include ++ ++/*Created on 2011/11/11, 8: 8*/ ++ ++#define Rtl8192DEImgArrayLength 32296 ++extern const u8 Rtl8192DEFwImgArray[Rtl8192DEImgArrayLength]; ++#define Rtl8192DEMainArrayLength 1 ++extern const u8 Rtl8192DEFwMainArray[Rtl8192DEMainArrayLength]; ++#define Rtl8192DEDataArrayLength 1 ++extern const u8 Rtl8192DEFwDataArray[Rtl8192DEDataArrayLength]; ++#define Rtl8192DEPHY_REG_2TArrayLength 372 ++extern const u32 Rtl8192DEPHY_REG_2TArray[Rtl8192DEPHY_REG_2TArrayLength]; ++#define Rtl8192DEPHY_REG_1TArrayLength 1 ++extern const u32 Rtl8192DEPHY_REG_1TArray[Rtl8192DEPHY_REG_1TArrayLength]; ++#define Rtl8192DEPHY_REG_Array_PGLength 624 ++extern const u32 Rtl8192DEPHY_REG_Array_PG[Rtl8192DEPHY_REG_Array_PGLength]; ++#define Rtl8192DEPHY_REG_Array_MPLength 12 ++extern const u32 Rtl8192DEPHY_REG_Array_MP[Rtl8192DEPHY_REG_Array_MPLength]; ++#define Rtl8192DERadioA_2TArrayLength 378 ++extern const u32 Rtl8192DERadioA_2TArray[Rtl8192DERadioA_2TArrayLength]; ++#define Rtl8192DERadioB_2TArrayLength 384 ++extern const u32 Rtl8192DERadioB_2TArray[Rtl8192DERadioB_2TArrayLength]; ++#define Rtl8192DERadioA_1TArrayLength 1 ++extern const u32 Rtl8192DERadioA_1TArray[Rtl8192DERadioA_1TArrayLength]; ++#define Rtl8192DERadioB_1TArrayLength 1 ++extern const u32 Rtl8192DERadioB_1TArray[Rtl8192DERadioB_1TArrayLength]; ++#define Rtl8192DERadioA_2T_intPAArrayLength 378 ++extern const u32 Rtl8192DERadioA_2T_intPAArray[Rtl8192DERadioA_2T_intPAArrayLength]; ++#define Rtl8192DERadioB_2T_intPAArrayLength 384 ++extern const u32 Rtl8192DERadioB_2T_intPAArray[Rtl8192DERadioB_2T_intPAArrayLength]; ++#define Rtl8192DEMAC_2T_ArrayLength 192 ++extern const u32 Rtl8192DEMAC_2T_Array[Rtl8192DEMAC_2T_ArrayLength]; ++#define Rtl8192DEAGCTAB_ArrayLength 386 ++extern const u32 Rtl8192DEAGCTAB_Array[Rtl8192DEAGCTAB_ArrayLength]; ++#define Rtl8192DEAGCTAB_5GArrayLength 194 ++extern const u32 Rtl8192DEAGCTAB_5GArray[Rtl8192DEAGCTAB_5GArrayLength]; ++#define Rtl8192DEAGCTAB_2GArrayLength 194 ++extern const u32 Rtl8192DEAGCTAB_2GArray[Rtl8192DEAGCTAB_2GArrayLength]; ++#define Rtl8192DEAGCTAB_2TArrayLength 1 ++extern const u32 Rtl8192DEAGCTAB_2TArray[Rtl8192DEAGCTAB_2TArrayLength]; ++#define Rtl8192DEAGCTAB_1TArrayLength 1 ++extern const u32 Rtl8192DEAGCTAB_1TArray[Rtl8192DEAGCTAB_1TArrayLength]; ++ ++#endif //__INC_HAL8192CU_FW_IMG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyCfg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyCfg.h +new file mode 100644 +index 000000000000..43c1188b6f88 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyCfg.h +@@ -0,0 +1,527 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/***************************************************************************** ++ * ++ * Module: __INC_HAL8192DPHYCFG_H ++ * ++ * ++ * Note: ++ * ++ * ++ * Export: Constants, macro, functions(API), global variables(None). ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. ++ * 2. Reorganize code architecture. ++ * ++ *****************************************************************************/ ++ /* Check to see if the file has been included already. */ ++#ifndef __INC_HAL8192DPHYCFG_H ++#define __INC_HAL8192DPHYCFG_H ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++#define LOOP_LIMIT 5 ++#define MAX_STALL_TIME 50 //us ++#define AntennaDiversityValue 0x80 //(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80) ++#define MAX_TXPWR_IDX_NMODE_92S 63 ++#define Reset_Cnt_Limit 3 ++ ++ ++#define IQK_MAC_REG_NUM 4 ++#define IQK_ADDA_REG_NUM 16 ++#define IQK_BB_REG_NUM 10 ++#define IQK_BB_REG_NUM_92C 9 ++#define IQK_BB_REG_NUM_92D 10 ++#define IQK_BB_REG_NUM_test 6 ++#define index_mapping_NUM 13 ++#define Rx_index_mapping_NUM 15 ++#define AVG_THERMAL_NUM 8 ++#define IQK_Matrix_REG_NUM 8 ++#define IQK_Matrix_Settings_NUM 1+24+21 ++ ++#ifdef CONFIG_PCI_HCI ++#define SET_RTL8192SE_RF_SLEEP(_pAdapter) \ ++{ \ ++ u1Byte u1bTmp; \ ++ u1bTmp = PlatformEFIORead1Byte(_pAdapter, REG_LDOV12D_CTRL); \ ++ u1bTmp |= BIT0; \ ++ PlatformEFIOWrite1Byte(_pAdapter, REG_LDOV12D_CTRL, u1bTmp); \ ++ PlatformEFIOWrite1Byte(_pAdapter, REG_SPS_OCP_CFG, 0x0); \ ++ PlatformEFIOWrite1Byte(_pAdapter, TXPAUSE, 0xFF); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \ ++ delay_us(100); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \ ++ PlatformEFIOWrite1Byte(_pAdapter, PHY_CCA, 0x0); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x37FC); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \ ++ delay_us(10); \ ++ PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \ ++} ++#endif ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++/*------------------------------Define structure----------------------------*/ ++typedef enum _SwChnlCmdID{ ++ CmdID_End, ++ CmdID_SetTxPowerLevel, ++ CmdID_BBRegWrite10, ++ CmdID_WritePortUlong, ++ CmdID_WritePortUshort, ++ CmdID_WritePortUchar, ++ CmdID_RF_WriteReg, ++}SwChnlCmdID; ++ ++ ++/* 1. Switch channel related */ ++typedef struct _SwChnlCmd{ ++ SwChnlCmdID CmdID; ++ u32 Para1; ++ u32 Para2; ++ u32 msDelay; ++}SwChnlCmd; ++ ++typedef enum _HW90_BLOCK{ ++ HW90_BLOCK_MAC = 0, ++ HW90_BLOCK_PHY0 = 1, ++ HW90_BLOCK_PHY1 = 2, ++ HW90_BLOCK_RF = 3, ++ HW90_BLOCK_MAXIMUM = 4, // Never use this ++}HW90_BLOCK_E, *PHW90_BLOCK_E; ++ ++//vivi added this for read parameter from header, 20100908 ++typedef enum _RF_CONTENT{ ++ radioa_txt = 0x1000, ++ radiob_txt = 0x1001, ++ radioc_txt = 0x1002, ++ radiod_txt = 0x1003 ++} RF_CONTENT; ++ ++#define RF_PATH_MAX 2 ++ ++typedef enum _WIRELESS_MODE { ++ WIRELESS_MODE_UNKNOWN = 0x00, ++ WIRELESS_MODE_A = 0x01, ++ WIRELESS_MODE_B = 0x02, ++ WIRELESS_MODE_G = 0x04, ++ WIRELESS_MODE_AUTO = 0x08, ++ WIRELESS_MODE_N_24G = 0x10, ++ WIRELESS_MODE_N_5G = 0x20 ++} WIRELESS_MODE; ++ ++ ++#define CHANNEL_MAX_NUMBER 14+24+21 // 14 is the max channel number ++#define CHANNEL_GROUP_MAX 3+9 // ch1~3, ch4~9, ch10~14 total three groups ++#define MAX_PG_GROUP 13 ++ ++#define CHANNEL_GROUP_MAX_2G 3 ++#define CHANNEL_GROUP_IDX_5GL 3 ++#define CHANNEL_GROUP_IDX_5GM 6 ++#define CHANNEL_GROUP_IDX_5GH 9 ++#define CHANNEL_GROUP_MAX_5G 9 ++#define CHANNEL_MAX_NUMBER_2G 14 ++ ++typedef enum _BaseBand_Config_Type{ ++ BaseBand_Config_PHY_REG = 0, //Radio Path A ++ BaseBand_Config_AGC_TAB = 1, //Radio Path B ++}BaseBand_Config_Type, *PBaseBand_Config_Type; ++ ++typedef enum _MACPHY_MODE_8192D{ ++ SINGLEMAC_SINGLEPHY, ++ DUALMAC_DUALPHY, ++ DUALMAC_SINGLEPHY, ++}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D; ++ ++typedef enum _MACPHY_MODE_CHANGE_ACTION{ ++ DMDP2DMSP = 0, ++ DMSP2DMDP = 1, ++ DMDP2SMSP = 2, ++ SMSP2DMDP = 3, ++ DMSP2SMSP = 4, ++ SMSP2DMSP = 5, ++ MAXACTION ++}MACPHY_MODE_CHANGE_ACTION,*PMACPHY_MODE_CHANGE_ACTION; ++ ++typedef enum _BAND_TYPE{ ++ BAND_ON_2_4G = 0, ++ BAND_ON_5G, ++ BAND_ON_BOTH, ++ BANDMAX ++}BAND_TYPE,*PBAND_TYPE; ++ ++typedef enum _PHY_Rate_Tx_Power_Offset_Area{ ++ RA_OFFSET_LEGACY_OFDM1, ++ RA_OFFSET_LEGACY_OFDM2, ++ RA_OFFSET_HT_OFDM1, ++ RA_OFFSET_HT_OFDM2, ++ RA_OFFSET_HT_OFDM3, ++ RA_OFFSET_HT_OFDM4, ++ RA_OFFSET_HT_CCK, ++}RA_OFFSET_AREA,*PRA_OFFSET_AREA; ++ ++ ++/* BB/RF related */ ++typedef enum _RF_TYPE_8190P{ ++ RF_TYPE_MIN, // 0 ++ RF_8225=1, // 1 11b/g RF for verification only ++ RF_8256=2, // 2 11b/g/n ++ RF_8258=3, // 3 11a/b/g/n RF ++ RF_6052=4, // 4 11b/g/n RF ++ //RF_6052=5, // 4 11b/g/n RF ++ // TODO: We sholud remove this psudo PHY RF after we get new RF. ++ RF_PSEUDO_11N=5, // 5, It is a temporality RF. ++}RF_TYPE_8190P_E,*PRF_TYPE_8190P_E; ++ ++typedef struct _BB_REGISTER_DEFINITION{ ++ u32 rfintfs; // set software control: ++ // 0x870~0x877[8 bytes] ++ ++ u32 rfintfi; // readback data: ++ // 0x8e0~0x8e7[8 bytes] ++ ++ u32 rfintfo; // output data: ++ // 0x860~0x86f [16 bytes] ++ ++ u32 rfintfe; // output enable: ++ // 0x860~0x86f [16 bytes] ++ ++ u32 rf3wireOffset; // LSSI data: ++ // 0x840~0x84f [16 bytes] ++ ++ u32 rfLSSI_Select; // BB Band Select: ++ // 0x878~0x87f [8 bytes] ++ ++ u32 rfTxGainStage; // Tx gain stage: ++ // 0x80c~0x80f [4 bytes] ++ ++ u32 rfHSSIPara1; // wire parameter control1 : ++ // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] ++ ++ u32 rfHSSIPara2; // wire parameter control2 : ++ // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] ++ ++ u32 rfSwitchControl; //Tx Rx antenna control : ++ // 0x858~0x85f [16 bytes] ++ ++ u32 rfAGCControl1; //AGC parameter control1 : ++ // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] ++ ++ u32 rfAGCControl2; //AGC parameter control2 : ++ // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] ++ ++ u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : ++ // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] ++ ++ u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : ++ // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] ++ ++ u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix ++ // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] ++ ++ u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type ++ // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] ++ ++ u32 rfLSSIReadBack; //LSSI RF readback data SI mode ++ // 0x8a0~0x8af [16 bytes] ++ ++ u32 rfLSSIReadBackPi; //LSSI RF readback data PI mode 0x8b8-8bc for Path A and B ++ ++}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T; ++ ++#ifdef CONFIG_MP_INCLUDED ++typedef enum _ANTENNA_PATH{ ++ ANTENNA_NONE = 0x00, ++ ANTENNA_D , ++ ANTENNA_C , ++ ANTENNA_CD , ++ ANTENNA_B , ++ ANTENNA_BD , ++ ANTENNA_BC , ++ ANTENNA_BCD , ++ ANTENNA_A , ++ ANTENNA_AD , ++ ANTENNA_AC , ++ ANTENNA_ACD , ++ ANTENNA_AB , ++ ANTENNA_ABD , ++ ANTENNA_ABC , ++ ANTENNA_ABCD ++} ANTENNA_PATH; ++#endif ++ ++typedef struct _R_ANTENNA_SELECT_OFDM{ ++ u32 r_tx_antenna:4; ++ u32 r_ant_l:4; ++ u32 r_ant_non_ht:4; ++ u32 r_ant_ht1:4; ++ u32 r_ant_ht2:4; ++ u32 r_ant_ht_s1:4; ++ u32 r_ant_non_ht_s1:4; ++ u32 OFDM_TXSC:2; ++ u32 Reserved:2; ++}R_ANTENNA_SELECT_OFDM; ++ ++typedef struct _R_ANTENNA_SELECT_CCK{ ++ u8 r_cckrx_enable_2:2; ++ u8 r_cckrx_enable:2; ++ u8 r_ccktx_enable:4; ++}R_ANTENNA_SELECT_CCK; ++ ++/*------------------------------Define structure----------------------------*/ ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++//Added for TX Power ++//u8 GetRightChnlPlace(u8 chnl); ++u8 rtl8192d_GetRightChnlPlaceforIQK(u8 chnl); ++u8 rtl8192d_getChnlGroupfromArray(u8 chnl); ++/*--------------------------Exported Function prototype---------------------*/ ++// ++// BB and RF register read/write ++// ++void rtl8192d_PHY_SetBBReg1Byte( IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ); ++u32 rtl8192d_PHY_QueryBBReg( IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask ); ++void rtl8192d_PHY_SetBBReg( IN PADAPTER Adapter, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ); ++u32 rtl8192d_PHY_QueryRFReg( IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask ); ++void rtl8192d_PHY_SetRFReg( IN PADAPTER Adapter, ++ IN RF_RADIO_PATH_E eRFPath, ++ IN u32 RegAddr, ++ IN u32 BitMask, ++ IN u32 Data ); ++ ++// ++// Initialization related function ++// ++/* MAC/BB/RF HAL config */ ++extern int PHY_MACConfig8192D( IN PADAPTER Adapter ); ++extern int PHY_BBConfig8192D( IN PADAPTER Adapter ); ++extern int PHY_RFConfig8192D( IN PADAPTER Adapter ); ++/* RF config */ ++int rtl8192d_PHY_ConfigRFWithParaFile( IN PADAPTER Adapter, ++ IN u8* pFileName, ++ IN RF_RADIO_PATH_E eRFPath); ++int rtl8192d_PHY_ConfigRFWithHeaderFile( IN PADAPTER Adapter, ++ IN RF_CONTENT Content, ++ IN RF_RADIO_PATH_E eRFPath); ++/* BB/RF readback check for making sure init OK */ ++int rtl8192d_PHY_CheckBBAndRFOK( IN PADAPTER Adapter, ++ IN HW90_BLOCK_E CheckBlock, ++ IN RF_RADIO_PATH_E eRFPath ); ++/* Read initi reg value for tx power setting. */ ++void rtl8192d_PHY_GetHWRegOriginalValue( IN PADAPTER Adapter ); ++ ++// ++// RF Power setting ++// ++//extern BOOLEAN PHY_SetRFPowerState(IN PADAPTER Adapter, ++// IN RT_RF_POWER_STATE eRFPowerState); ++ ++// ++// BB TX Power R/W ++// ++void PHY_GetTxPowerLevel8192D( IN PADAPTER Adapter, ++ OUT u32* powerlevel ); ++void PHY_SetTxPowerLevel8192D( IN PADAPTER Adapter, ++ IN u8 channel ); ++BOOLEAN PHY_UpdateTxPowerDbm8192D( IN PADAPTER Adapter, ++ IN int powerInDbm ); ++ ++// ++VOID ++PHY_ScanOperationBackup8192D(IN PADAPTER Adapter, ++ IN u8 Operation ); ++ ++// ++// Switch bandwidth for 8192S ++// ++//void PHY_SetBWModeCallback8192C( IN PRT_TIMER pTimer ); ++void PHY_SetBWMode8192D( IN PADAPTER pAdapter, ++ IN HT_CHANNEL_WIDTH ChnlWidth, ++ IN unsigned char Offset ); ++ ++// ++// Set FW CMD IO for 8192S. ++// ++//extern BOOLEAN HalSetIO8192C( IN PADAPTER Adapter, ++// IN IO_TYPE IOType); ++ ++// ++// Set A2 entry to fw for 8192S ++// ++extern void FillA2Entry8192C( IN PADAPTER Adapter, ++ IN u8 index, ++ IN u8* val); ++ ++ ++// ++// channel switch related funciton ++// ++//extern void PHY_SwChnlCallback8192C( IN PRT_TIMER pTimer ); ++void PHY_SwChnl8192D( IN PADAPTER pAdapter, ++ IN u8 channel ); ++ // Call after initialization ++void PHY_SwChnlPhy8192D( IN PADAPTER pAdapter, ++ IN u8 channel ); ++ ++extern void ChkFwCmdIoDone( IN PADAPTER Adapter); ++ ++#ifdef USE_WORKITEM ++//extern void SetIOWorkItemCallback( IN PVOID pContext ); ++#else ++//extern void SetIOTimerCallback( IN PRT_TIMER pTimer); ++#endif ++ ++// ++// BB/MAC/RF other monitor API ++// ++void PHY_SetMonitorMode8192D(IN PADAPTER pAdapter, ++ IN BOOLEAN bEnableMonitorMode ); ++ ++BOOLEAN PHY_CheckIsLegalRfPath8192D(IN PADAPTER pAdapter, ++ IN u32 eRFPath ); ++ ++// ++// IQ calibrate ++// ++void rtl8192d_PHY_IQCalibrate( IN PADAPTER pAdapter); ++ ++ ++// ++// LC calibrate ++// ++void rtl8192d_PHY_LCCalibrate(IN PADAPTER pAdapter); ++ ++// ++// AP calibrate ++// ++void rtl8192d_PHY_APCalibrate(IN PADAPTER pAdapter, IN char delta); ++ ++ ++// ++// Modify the value of the hw register when beacon interval be changed. ++// ++void ++rtl8192d_PHY_SetBeaconHwReg( IN PADAPTER Adapter, ++ IN u16 BeaconInterval ); ++ ++ ++extern VOID ++PHY_SwitchEphyParameter( ++ IN PADAPTER Adapter ++ ); ++ ++extern VOID ++PHY_EnableHostClkReq( ++ IN PADAPTER Adapter ++ ); ++ ++BOOLEAN ++SetAntennaConfig92C( ++ IN PADAPTER Adapter, ++ IN u8 DefaultAnt ++ ); ++ ++VOID ++PHY_StopTRXBeforeChangeBand8192D( ++ PADAPTER Adapter ++); ++ ++VOID ++PHY_UpdateBBRFConfiguration8192D( ++ IN PADAPTER Adapter, ++ IN BOOLEAN bisBandSwitch ++); ++ ++VOID PHY_ReadMacPhyMode92D( ++ IN PADAPTER Adapter, ++ IN BOOLEAN AutoloadFail ++); ++ ++VOID PHY_ConfigMacPhyMode92D( ++ IN PADAPTER Adapter ++); ++ ++VOID PHY_ConfigMacPhyModeInfo92D( ++ IN PADAPTER Adapter ++); ++ ++VOID PHY_ConfigMacCoexist_RFPage92D( ++ IN PADAPTER Adapter ++); ++ ++VOID ++rtl8192d_PHY_InitRxSetting( ++ IN PADAPTER Adapter ++); ++ ++VOID ++rtl8192d_PHY_ResetIQKResult( ++ IN PADAPTER Adapter ++); ++ ++ ++VOID ++rtl8192d_PHY_SetRFPathSwitch(IN PADAPTER pAdapter, IN BOOLEAN bMain); ++ ++VOID ++HalChangeCCKStatus8192D( ++ IN PADAPTER Adapter, ++ IN BOOLEAN bCCKDisable ++); ++ ++VOID ++PHY_InitPABias92D(IN PADAPTER Adapter); ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++#define PHY_SetBBReg1Byte(Adapter, RegAddr, BitMask, Data) rtl8192d_PHY_SetBBReg1Byte((Adapter), (RegAddr), (BitMask), (Data)) ++#define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8192d_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask)) ++#define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8192d_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data)) ++#define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8192d_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask)) ++#define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8192d_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data)) ++ ++#define PHY_SetMacReg PHY_SetBBReg ++ ++#endif // __INC_HAL8192SPHYCFG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyReg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyReg.h +new file mode 100644 +index 000000000000..f79d8a2c5c98 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DPhyReg.h +@@ -0,0 +1,1170 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/***************************************************************************** ++ * ++ * Module: __INC_HAL8192DPHYREG_H ++ * ++ * ++ * Note: 1. Define PMAC/BB register map ++ * 2. Define RF register map ++ * 3. PMAC/BB register bit mask. ++ * 4. RF reg bit mask. ++ * 5. Other BB/RF relative definition. ++ * ++ * ++ * Export: Constants, macro, functions(API), global variables(None). ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. ++ * 2. Reorganize code architecture. ++ * 09/25/2008 MH 1. Add RL6052 register definition ++ * ++ *****************************************************************************/ ++#ifndef __INC_HAL8192DPHYREG_H ++#define __INC_HAL8192DPHYREG_H ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++//============================================================ ++// 8192S Regsiter offset definition ++//============================================================ ++ ++// ++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 ++// 3. RF register 0x00-2E ++// 4. Bit Mask for BB/RF register ++// 5. Other defintion for BB/RF R/W ++// ++ ++ ++// ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 1. Page1(0x100) ++// ++#define rPMAC_Reset 0x100 ++#define rPMAC_TxStart 0x104 ++#define rPMAC_TxLegacySIG 0x108 ++#define rPMAC_TxHTSIG1 0x10c ++#define rPMAC_TxHTSIG2 0x110 ++#define rPMAC_PHYDebug 0x114 ++#define rPMAC_TxPacketNum 0x118 ++#define rPMAC_TxIdle 0x11c ++#define rPMAC_TxMACHeader0 0x120 ++#define rPMAC_TxMACHeader1 0x124 ++#define rPMAC_TxMACHeader2 0x128 ++#define rPMAC_TxMACHeader3 0x12c ++#define rPMAC_TxMACHeader4 0x130 ++#define rPMAC_TxMACHeader5 0x134 ++#define rPMAC_TxDataType 0x138 ++#define rPMAC_TxRandomSeed 0x13c ++#define rPMAC_CCKPLCPPreamble 0x140 ++#define rPMAC_CCKPLCPHeader 0x144 ++#define rPMAC_CCKCRC16 0x148 ++#define rPMAC_OFDMRxCRC32OK 0x170 ++#define rPMAC_OFDMRxCRC32Er 0x174 ++#define rPMAC_OFDMRxParityEr 0x178 ++#define rPMAC_OFDMRxCRC8Er 0x17c ++#define rPMAC_CCKCRxRC16Er 0x180 ++#define rPMAC_CCKCRxRC32Er 0x184 ++#define rPMAC_CCKCRxRC32OK 0x188 ++#define rPMAC_TxStatus 0x18c ++ ++// ++// 2. Page2(0x200) ++// ++// The following two definition are only used for USB interface. ++#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address. ++#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data. ++ ++// ++// 3. Page8(0x800) ++// ++#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting?? ++ ++#define rFPGA0_TxInfo 0x804 // Status report?? ++#define rFPGA0_PSDFunction 0x808 ++ ++#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain? ++ ++#define rFPGA0_RFTiming1 0x810 // Useless now ++#define rFPGA0_RFTiming2 0x814 ++ ++#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register ++#define rFPGA0_XA_HSSIParameter2 0x824 ++#define rFPGA0_XB_HSSIParameter1 0x828 ++#define rFPGA0_XB_HSSIParameter2 0x82c ++ ++#define rFPGA0_XA_LSSIParameter 0x840 ++#define rFPGA0_XB_LSSIParameter 0x844 ++ ++#define rFPGA0_RFWakeUpParameter 0x850 // Useless now ++#define rFPGA0_RFSleepUpParameter 0x854 ++ ++#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch ++#define rFPGA0_XCD_SwitchControl 0x85c ++ ++#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch ++#define rFPGA0_XB_RFInterfaceOE 0x864 ++ ++#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control ++#define rFPGA0_XCD_RFInterfaceSW 0x874 ++ ++#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter ++#define rFPGA0_XCD_RFParameter 0x87c ++ ++#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4?? ++#define rFPGA0_AnalogParameter2 0x884 ++#define rFPGA0_AnalogParameter3 0x888 ++#define rFPGA0_AdDaClockEn 0x888 // enable ad/da clock1 for dual-phy ++#define rFPGA0_AnalogParameter4 0x88c ++ ++#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback ++#define rFPGA0_XB_LSSIReadBack 0x8a4 ++#define rFPGA0_XC_LSSIReadBack 0x8a8 ++#define rFPGA0_XD_LSSIReadBack 0x8ac ++ ++#define rFPGA0_PSDReport 0x8b4 // Useless now ++#define TransceiverA_HSPI_Readback 0x8b8 // Transceiver A HSPI Readback ++#define TransceiverB_HSPI_Readback 0x8bc // Transceiver B HSPI Readback ++#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value ++#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now ++ ++// ++// 4. Page9(0x900) ++// ++#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting?? ++ ++#define rFPGA1_TxBlock 0x904 // Useless now ++#define rFPGA1_DebugSelect 0x908 // Useless now ++#define rFPGA1_TxInfo 0x90c // Useless now // Status report?? ++ ++// ++// 5. PageA(0xA00) ++// ++// Set Control channel to upper or lower. These settings are required only for 40MHz ++#define rCCK0_System 0xa00 ++ ++#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI ++#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain ++ ++#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series ++#define rCCK0_RxAGC2 0xa10 //AGC & DAGC ++ ++#define rCCK0_RxHP 0xa14 ++ ++#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold ++#define rCCK0_DSPParameter2 0xa1c //SQ threshold ++ ++#define rCCK0_TxFilter1 0xa20 ++#define rCCK0_TxFilter2 0xa24 ++#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 ++#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report ++#define rCCK0_TRSSIReport 0xa50 ++#define rCCK0_RxReport 0xa54 //0xa57 ++#define rCCK0_FACounterLower 0xa5c //0xa5b ++#define rCCK0_FACounterUpper 0xa58 //0xa5c ++ ++// ++// PageB(0xB00) ++// ++#define rPdp_AntA 0xb00 ++#define rPdp_AntA_4 0xb04 ++#define rPdp_AntA_8 0xb08 ++#define rPdp_AntA_C 0xb0c ++#define rPdp_AntA_10 0xb10 ++#define rPdp_AntA_14 0xb14 ++#define rPdp_AntA_18 0xb18 ++#define rPdp_AntA_1C 0xb1c ++#define rPdp_AntA_20 0xb20 ++#define rPdp_AntA_24 0xb24 ++ ++#define rConfig_Pmpd_AntA 0xb28 ++#define rConfig_ram64x16 0xb2c ++ ++#define rBndA 0xb30 ++#define rHssiPar 0xb34 ++ ++#define rConfig_AntA 0xb68 ++#define rConfig_AntB 0xb6c ++ ++#define rPdp_AntB 0xb70 ++#define rPdp_AntB_4 0xb74 ++#define rPdp_AntB_8 0xb78 ++#define rPdp_AntB_C 0xb7c ++#define rPdp_AntB_10 0xb80 ++#define rPdp_AntB_14 0xb84 ++#define rPdp_AntB_18 0xb88 ++#define rPdp_AntB_1C 0xb8c ++#define rPdp_AntB_20 0xb90 ++#define rPdp_AntB_24 0xb94 ++ ++#define rConfig_Pmpd_AntB 0xb98 ++ ++#define rBndB 0xba0 ++ ++#define rAPK 0xbd8 ++#define rPm_Rx0_AntA 0xbdc ++#define rPm_Rx1_AntA 0xbe0 ++#define rPm_Rx2_AntA 0xbe4 ++#define rPm_Rx3_AntA 0xbe8 ++#define rPm_Rx0_AntB 0xbec ++#define rPm_Rx1_AntB 0xbf0 ++#define rPm_Rx2_AntB 0xbf4 ++#define rPm_Rx3_AntB 0xbf8 ++ ++// ++// 6. PageC(0xC00) ++// ++#define rOFDM0_LSTF 0xc00 ++ ++#define rOFDM0_TRxPathEnable 0xc04 ++#define rOFDM0_TRMuxPar 0xc08 ++#define rOFDM0_TRSWIsolation 0xc0c ++ ++#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter ++#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix ++#define rOFDM0_XBRxAFE 0xc18 ++#define rOFDM0_XBRxIQImbalance 0xc1c ++#define rOFDM0_XCRxAFE 0xc20 ++#define rOFDM0_XCRxIQImbalance 0xc24 ++#define rOFDM0_XDRxAFE 0xc28 ++#define rOFDM0_XDRxIQImbalance 0xc2c ++ ++#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain ++#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. ++#define rOFDM0_RxDetector3 0xc38 //Frame Sync. ++#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI ++ ++#define rOFDM0_RxDSP 0xc40 //Rx Sync Path ++#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC ++#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold ++#define rOFDM0_ECCAThreshold 0xc4c // energy CCA ++ ++#define rOFDM0_XAAGCCore1 0xc50 // DIG ++#define rOFDM0_XAAGCCore2 0xc54 ++#define rOFDM0_XBAGCCore1 0xc58 ++#define rOFDM0_XBAGCCore2 0xc5c ++#define rOFDM0_XCAGCCore1 0xc60 ++#define rOFDM0_XCAGCCore2 0xc64 ++#define rOFDM0_XDAGCCore1 0xc68 ++#define rOFDM0_XDAGCCore2 0xc6c ++ ++#define rOFDM0_AGCParameter1 0xc70 ++#define rOFDM0_AGCParameter2 0xc74 ++#define rOFDM0_AGCRSSITable 0xc78 ++#define rOFDM0_HTSTFAGC 0xc7c ++ ++#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG ++#define rOFDM0_XATxAFE 0xc84 ++#define rOFDM0_XBTxIQImbalance 0xc88 ++#define rOFDM0_XBTxAFE 0xc8c ++#define rOFDM0_XCTxIQImbalance 0xc90 ++#define rOFDM0_XCTxAFE 0xc94 ++#define rOFDM0_XDTxIQImbalance 0xc98 ++#define rOFDM0_XDTxAFE 0xc9c ++ ++#define rOFDM0_RxIQExtAnta 0xca0 ++#define rOFDM0_TxCoeff1 0xca4 ++#define rOFDM0_TxCoeff2 0xca8 ++#define rOFDM0_TxCoeff3 0xcac ++#define rOFDM0_TxCoeff4 0xcb0 ++#define rOFDM0_TxCoeff5 0xcb4 ++#define rOFDM0_TxCoeff6 0xcb8 ++#define rOFDM0_RxHPParameter 0xce0 ++#define rOFDM0_TxPseudoNoiseWgt 0xce4 ++#define rOFDM0_FrameSync 0xcf0 ++#define rOFDM0_DFSReport 0xcf4 ++ ++// ++// 7. PageD(0xD00) ++// ++#define rOFDM1_LSTF 0xd00 ++#define rOFDM1_TRxPathEnable 0xd04 ++ ++#define rOFDM1_CFO 0xd08 // No setting now ++#define rOFDM1_CSI1 0xd10 ++#define rOFDM1_SBD 0xd14 ++#define rOFDM1_CSI2 0xd18 ++#define rOFDM1_CFOTracking 0xd2c ++#define rOFDM1_TRxMesaure1 0xd34 ++#define rOFDM1_IntfDet 0xd3c ++#define rOFDM1_PseudoNoiseStateAB 0xd50 ++#define rOFDM1_PseudoNoiseStateCD 0xd54 ++#define rOFDM1_RxPseudoNoiseWgt 0xd58 ++ ++#define rOFDM_PHYCounter1 0xda0 //cca, parity fail ++#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail ++#define rOFDM_PHYCounter3 0xda8 //MCS not support ++ ++#define rOFDM_ShortCFOAB 0xdac // No setting now ++#define rOFDM_ShortCFOCD 0xdb0 ++#define rOFDM_LongCFOAB 0xdb4 ++#define rOFDM_LongCFOCD 0xdb8 ++#define rOFDM_TailCFOAB 0xdbc ++#define rOFDM_TailCFOCD 0xdc0 ++#define rOFDM_PWMeasure1 0xdc4 ++#define rOFDM_PWMeasure2 0xdc8 ++#define rOFDM_BWReport 0xdcc ++#define rOFDM_AGCReport 0xdd0 ++#define rOFDM_RxSNR 0xdd4 ++#define rOFDM_RxEVMCSI 0xdd8 ++#define rOFDM_SIGReport 0xddc ++ ++ ++// ++// 8. PageE(0xE00) ++// ++#define rTxAGC_A_Rate18_06 0xe00 ++#define rTxAGC_A_Rate54_24 0xe04 ++#define rTxAGC_A_CCK1_Mcs32 0xe08 ++#define rTxAGC_A_Mcs03_Mcs00 0xe10 ++#define rTxAGC_A_Mcs07_Mcs04 0xe14 ++#define rTxAGC_A_Mcs11_Mcs08 0xe18 ++#define rTxAGC_A_Mcs15_Mcs12 0xe1c ++ ++#define rTxAGC_B_Rate18_06 0x830 ++#define rTxAGC_B_Rate54_24 0x834 ++#define rTxAGC_B_CCK1_55_Mcs32 0x838 ++#define rTxAGC_B_Mcs03_Mcs00 0x83c ++#define rTxAGC_B_Mcs07_Mcs04 0x848 ++#define rTxAGC_B_Mcs11_Mcs08 0x84c ++#define rTxAGC_B_Mcs15_Mcs12 0x868 ++#define rTxAGC_B_CCK11_A_CCK2_11 0x86c ++ ++#define rFPGA0_IQK 0xe28 ++#define rTx_IQK_Tone_A 0xe30 ++#define rRx_IQK_Tone_A 0xe34 ++#define rTx_IQK_PI_A 0xe38 ++#define rRx_IQK_PI_A 0xe3c ++ ++#define rTx_IQK 0xe40 ++#define rRx_IQK 0xe44 ++#define rIQK_AGC_Pts 0xe48 ++#define rIQK_AGC_Rsp 0xe4c ++#define rTx_IQK_Tone_B 0xe50 ++#define rRx_IQK_Tone_B 0xe54 ++#define rTx_IQK_PI_B 0xe58 ++#define rRx_IQK_PI_B 0xe5c ++#define rIQK_AGC_Cont 0xe60 ++ ++#define rBlue_Tooth 0xe6c ++#define rRx_Wait_CCA 0xe70 ++#define rTx_CCK_RFON 0xe74 ++#define rTx_CCK_BBON 0xe78 ++#define rTx_OFDM_RFON 0xe7c ++#define rTx_OFDM_BBON 0xe80 ++#define rTx_To_Rx 0xe84 ++#define rTx_To_Tx 0xe88 ++#define rRx_CCK 0xe8c ++ ++#define rTx_Power_Before_IQK_A 0xe94 ++#define rTx_Power_After_IQK_A 0xe9c ++ ++#define rRx_Power_Before_IQK_A 0xea0 ++#define rRx_Power_Before_IQK_A_2 0xea4 ++#define rRx_Power_After_IQK_A 0xea8 ++#define rRx_Power_After_IQK_A_2 0xeac ++ ++#define rTx_Power_Before_IQK_B 0xeb4 ++#define rTx_Power_After_IQK_B 0xebc ++ ++#define rRx_Power_Before_IQK_B 0xec0 ++#define rRx_Power_Before_IQK_B_2 0xec4 ++#define rRx_Power_After_IQK_B 0xec8 ++#define rRx_Power_After_IQK_B_2 0xecc ++ ++#define rRx_OFDM 0xed0 ++#define rRx_Wait_RIFS 0xed4 ++#define rRx_TO_Rx 0xed8 ++#define rStandby 0xedc ++#define rSleep 0xee0 ++#define rPMPD_ANAEN 0xeec ++ ++// ++// 7. RF Register 0x00-0x2E (RF 8256) ++// RF-0222D 0x00-3F ++// ++//Zebra1 ++#define rZebra1_HSSIEnable 0x0 // Useless now ++#define rZebra1_TRxEnable1 0x1 ++#define rZebra1_TRxEnable2 0x2 ++#define rZebra1_AGC 0x4 ++#define rZebra1_ChargePump 0x5 ++#define rZebra1_Channel 0x7 // RF channel switch ++ ++//#endif ++#define rZebra1_TxGain 0x8 // Useless now ++#define rZebra1_TxLPF 0x9 ++#define rZebra1_RxLPF 0xb ++#define rZebra1_RxHPFCorner 0xc ++ ++//Zebra4 ++#define rGlobalCtrl 0 // Useless now ++#define rRTL8256_TxLPF 19 ++#define rRTL8256_RxLPF 11 ++ ++//RTL8258 ++#define rRTL8258_TxLPF 0x11 // Useless now ++#define rRTL8258_RxLPF 0x13 ++#define rRTL8258_RSSILPF 0xa ++ ++// ++// RL6052 Register definition ++// ++#define RF_AC 0x00 // ++ ++#define RF_IQADJ_G1 0x01 // ++#define RF_IQADJ_G2 0x02 // ++#define RF_BS_PA_APSET_G1_G4 0x03 ++#define RF_BS_PA_APSET_G5_G8 0x04 ++#define RF_POW_TRSW 0x05 // ++ ++#define RF_GAIN_RX 0x06 // ++#define RF_GAIN_TX 0x07 // ++ ++#define RF_TXM_IDAC 0x08 // ++#define RF_IPA_G 0x09 // ++#define RF_TXBIAS_G 0x0A ++#define RF_TXPA_AG 0x0B ++#define RF_IPA_A 0x0C // ++#define RF_TXBIAS_A 0x0D ++#define RF_BS_PA_APSET_G9_G11 0x0E ++#define RF_BS_IQGEN 0x0F // ++ ++#define RF_MODE1 0x10 // ++#define RF_MODE2 0x11 // ++ ++#define RF_RX_AGC_HP 0x12 // ++#define RF_TX_AGC 0x13 // ++#define RF_BIAS 0x14 // ++#define RF_IPA 0x15 // ++#define RF_POW_ABILITY 0x17 // ++#define RF_MODE_AG 0x18 // ++#define rRfChannel 0x18 // RF channel and BW switch ++#define RF_CHNLBW 0x18 // RF channel and BW switch ++#define RF_TOP 0x19 // ++ ++#define RF_RX_G1 0x1A // ++#define RF_RX_G2 0x1B // ++ ++#define RF_RX_BB2 0x1C // ++#define RF_RX_BB1 0x1D // ++ ++#define RF_RCK1 0x1E // ++#define RF_RCK2 0x1F // ++ ++#define RF_TX_G1 0x20 // ++#define RF_TX_G2 0x21 // ++#define RF_TX_G3 0x22 // ++ ++#define RF_TX_BB1 0x23 // ++ ++#define RF_T_METER 0x42 // ++ ++#define RF_SYN_G1 0x25 // RF TX Power control ++#define RF_SYN_G2 0x26 // RF TX Power control ++#define RF_SYN_G3 0x27 // RF TX Power control ++#define RF_SYN_G4 0x28 // RF TX Power control ++#define RF_SYN_G5 0x29 // RF TX Power control ++#define RF_SYN_G6 0x2A // RF TX Power control ++#define RF_SYN_G7 0x2B // RF TX Power control ++#define RF_SYN_G8 0x2C // RF TX Power control ++ ++#define RF_RCK_OS 0x30 // RF TX PA control ++ ++#define RF_TXPA_G1 0x31 // RF TX PA control ++#define RF_TXPA_G2 0x32 // RF TX PA control ++#define RF_TXPA_G3 0x33 // RF TX PA control ++#define RF_LOBF_9 0x38 ++#define RF_RXRF_A3 0x3C // ++#define RF_TRSW 0x3F ++ ++#define RF_TXRF_A2 0x41 ++#define RF_TXPA_G4 0x46 ++#define RF_TXPA_A4 0x4B ++ ++// ++//Bit Mask ++// ++// 1. Page1(0x100) ++#define bBBResetB 0x100 // Useless now? ++#define bGlobalResetB 0x200 ++#define bOFDMTxStart 0x4 ++#define bCCKTxStart 0x8 ++#define bCRC32Debug 0x100 ++#define bPMACLoopback 0x10 ++#define bTxLSIG 0xffffff ++#define bOFDMTxRate 0xf ++#define bOFDMTxReserved 0x10 ++#define bOFDMTxLength 0x1ffe0 ++#define bOFDMTxParity 0x20000 ++#define bTxHTSIG1 0xffffff ++#define bTxHTMCSRate 0x7f ++#define bTxHTBW 0x80 ++#define bTxHTLength 0xffff00 ++#define bTxHTSIG2 0xffffff ++#define bTxHTSmoothing 0x1 ++#define bTxHTSounding 0x2 ++#define bTxHTReserved 0x4 ++#define bTxHTAggreation 0x8 ++#define bTxHTSTBC 0x30 ++#define bTxHTAdvanceCoding 0x40 ++#define bTxHTShortGI 0x80 ++#define bTxHTNumberHT_LTF 0x300 ++#define bTxHTCRC8 0x3fc00 ++#define bCounterReset 0x10000 ++#define bNumOfOFDMTx 0xffff ++#define bNumOfCCKTx 0xffff0000 ++#define bTxIdleInterval 0xffff ++#define bOFDMService 0xffff0000 ++#define bTxMACHeader 0xffffffff ++#define bTxDataInit 0xff ++#define bTxHTMode 0x100 ++#define bTxDataType 0x30000 ++#define bTxRandomSeed 0xffffffff ++#define bCCKTxPreamble 0x1 ++#define bCCKTxSFD 0xffff0000 ++#define bCCKTxSIG 0xff ++#define bCCKTxService 0xff00 ++#define bCCKLengthExt 0x8000 ++#define bCCKTxLength 0xffff0000 ++#define bCCKTxCRC16 0xffff ++#define bCCKTxStatus 0x1 ++#define bOFDMTxStatus 0x2 ++ ++#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff)) ++ ++// 2. Page8(0x800) ++#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD ++#define bJapanMode 0x2 ++#define bCCKTxSC 0x30 ++#define bCCKEn 0x1000000 ++#define bOFDMEn 0x2000000 ++ ++#define bOFDMRxADCPhase 0x10000 // Useless now ++#define bOFDMTxDACPhase 0x40000 ++#define bXATxAGC 0x3f ++ ++#define bAntennaSelect 0x0300 ++ ++#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage ++#define bXCTxAGC 0xf000 ++#define bXDTxAGC 0xf0000 ++ ++#define bPAStart 0xf0000000 // Useless now ++#define bTRStart 0x00f00000 ++#define bRFStart 0x0000f000 ++#define bBBStart 0x000000f0 ++#define bBBCCKStart 0x0000000f ++#define bPAEnd 0xf //Reg0x814 ++#define bTREnd 0x0f000000 ++#define bRFEnd 0x000f0000 ++#define bCCAMask 0x000000f0 //T2R ++#define bR2RCCAMask 0x00000f00 ++#define bHSSI_R2TDelay 0xf8000000 ++#define bHSSI_T2RDelay 0xf80000 ++#define bContTxHSSI 0x400 //chane gain at continue Tx ++#define bIGFromCCK 0x200 ++#define bAGCAddress 0x3f ++#define bRxHPTx 0x7000 ++#define bRxHPT2R 0x38000 ++#define bRxHPCCKIni 0xc0000 ++#define bAGCTxCode 0xc00000 ++#define bAGCRxCode 0x300000 ++ ++#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1 ++#define b3WireAddressLength 0x400 ++ ++#define b3WireRFPowerDown 0x1 // Useless now ++//#define bHWSISelect 0x8 ++#define b5GPAPEPolarity 0x40000000 ++#define b2GPAPEPolarity 0x80000000 ++#define bRFSW_TxDefaultAnt 0x3 ++#define bRFSW_TxOptionAnt 0x30 ++#define bRFSW_RxDefaultAnt 0x300 ++#define bRFSW_RxOptionAnt 0x3000 ++#define bRFSI_3WireData 0x1 ++#define bRFSI_3WireClock 0x2 ++#define bRFSI_3WireLoad 0x4 ++#define bRFSI_3WireRW 0x8 ++#define bRFSI_3Wire 0xf ++ ++#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW ++ ++#define bRFSI_TRSW 0x20 // Useless now ++#define bRFSI_TRSWB 0x40 ++#define bRFSI_ANTSW 0x100 ++#define bRFSI_ANTSWB 0x200 ++#define bRFSI_PAPE 0x400 ++#define bRFSI_PAPE5G 0x800 ++#define bBandSelect 0x1 ++#define bHTSIG2_GI 0x80 ++#define bHTSIG2_Smoothing 0x01 ++#define bHTSIG2_Sounding 0x02 ++#define bHTSIG2_Aggreaton 0x08 ++#define bHTSIG2_STBC 0x30 ++#define bHTSIG2_AdvCoding 0x40 ++#define bHTSIG2_NumOfHTLTF 0x300 ++#define bHTSIG2_CRC8 0x3fc ++#define bHTSIG1_MCS 0x7f ++#define bHTSIG1_BandWidth 0x80 ++#define bHTSIG1_HTLength 0xffff ++#define bLSIG_Rate 0xf ++#define bLSIG_Reserved 0x10 ++#define bLSIG_Length 0x1fffe ++#define bLSIG_Parity 0x20 ++#define bCCKRxPhase 0x4 ++ ++#define bLSSIReadAddress 0x7f800000 // T65 RF ++ ++#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal ++ ++#define bLSSIReadBackData 0xfffff // T65 RF ++ ++#define bLSSIReadOKFlag 0x1000 // Useless now ++#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz ++#define bRegulator0Standby 0x1 ++#define bRegulatorPLLStandby 0x2 ++#define bRegulator1Standby 0x4 ++#define bPLLPowerUp 0x8 ++#define bDPLLPowerUp 0x10 ++#define bDA10PowerUp 0x20 ++#define bAD7PowerUp 0x200 ++#define bDA6PowerUp 0x2000 ++#define bXtalPowerUp 0x4000 ++#define b40MDClkPowerUP 0x8000 ++#define bDA6DebugMode 0x20000 ++#define bDA6Swing 0x380000 ++ ++#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ ++ ++#define b80MClkDelay 0x18000000 // Useless ++#define bAFEWatchDogEnable 0x20000000 ++ ++#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap ++#define bXtalCap23 0x3 ++#define bXtalCap92x 0x0f000000 ++#define bXtalCap 0x0f000000 ++ ++#define bIntDifClkEnable 0x400 // Useless ++#define bExtSigClkEnable 0x800 ++#define bBandgapMbiasPowerUp 0x10000 ++#define bAD11SHGain 0xc0000 ++#define bAD11InputRange 0x700000 ++#define bAD11OPCurrent 0x3800000 ++#define bIPathLoopback 0x4000000 ++#define bQPathLoopback 0x8000000 ++#define bAFELoopback 0x10000000 ++#define bDA10Swing 0x7e0 ++#define bDA10Reverse 0x800 ++#define bDAClkSource 0x1000 ++#define bAD7InputRange 0x6000 ++#define bAD7Gain 0x38000 ++#define bAD7OutputCMMode 0x40000 ++#define bAD7InputCMMode 0x380000 ++#define bAD7Current 0xc00000 ++#define bRegulatorAdjust 0x7000000 ++#define bAD11PowerUpAtTx 0x1 ++#define bDA10PSAtTx 0x10 ++#define bAD11PowerUpAtRx 0x100 ++#define bDA10PSAtRx 0x1000 ++#define bCCKRxAGCFormat 0x200 ++#define bPSDFFTSamplepPoint 0xc000 ++#define bPSDAverageNum 0x3000 ++#define bIQPathControl 0xc00 ++#define bPSDFreq 0x3ff ++#define bPSDAntennaPath 0x30 ++#define bPSDIQSwitch 0x40 ++#define bPSDRxTrigger 0x400000 ++#define bPSDTxTrigger 0x80000000 ++#define bPSDSineToneScale 0x7f000000 ++#define bPSDReport 0xffff ++ ++// 3. Page9(0x900) ++#define bOFDMTxSC 0x30000000 // Useless ++#define bCCKTxOn 0x1 ++#define bOFDMTxOn 0x2 ++#define bDebugPage 0xfff //reset debug page and also HWord, LWord ++#define bDebugItem 0xff //reset debug page and LWord ++#define bAntL 0x10 ++#define bAntNonHT 0x100 ++#define bAntHT1 0x1000 ++#define bAntHT2 0x10000 ++#define bAntHT1S1 0x100000 ++#define bAntNonHTS1 0x1000000 ++ ++// 4. PageA(0xA00) ++#define bCCKBBMode 0x3 // Useless ++#define bCCKTxPowerSaving 0x80 ++#define bCCKRxPowerSaving 0x40 ++ ++#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch ++ ++#define bCCKScramble 0x8 // Useless ++#define bCCKAntDiversity 0x8000 ++#define bCCKCarrierRecovery 0x4000 ++#define bCCKTxRate 0x3000 ++#define bCCKDCCancel 0x0800 ++#define bCCKISICancel 0x0400 ++#define bCCKMatchFilter 0x0200 ++#define bCCKEqualizer 0x0100 ++#define bCCKPreambleDetect 0x800000 ++#define bCCKFastFalseCCA 0x400000 ++#define bCCKChEstStart 0x300000 ++#define bCCKCCACount 0x080000 ++#define bCCKcs_lim 0x070000 ++#define bCCKBistMode 0x80000000 ++#define bCCKCCAMask 0x40000000 ++#define bCCKTxDACPhase 0x4 ++#define bCCKRxADCPhase 0x20000000 //r_rx_clk ++#define bCCKr_cp_mode0 0x0100 ++#define bCCKTxDCOffset 0xf0 ++#define bCCKRxDCOffset 0xf ++#define bCCKCCAMode 0xc000 ++#define bCCKFalseCS_lim 0x3f00 ++#define bCCKCS_ratio 0xc00000 ++#define bCCKCorgBit_sel 0x300000 ++#define bCCKPD_lim 0x0f0000 ++#define bCCKNewCCA 0x80000000 ++#define bCCKRxHPofIG 0x8000 ++#define bCCKRxIG 0x7f00 ++#define bCCKLNAPolarity 0x800000 ++#define bCCKRx1stGain 0x7f0000 ++#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity ++#define bCCKRxAGCSatLevel 0x1f000000 ++#define bCCKRxAGCSatCount 0xe0 ++#define bCCKRxRFSettle 0x1f //AGCsamp_dly ++#define bCCKFixedRxAGC 0x8000 ++//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 ++#define bCCKAntennaPolarity 0x2000 ++#define bCCKTxFilterType 0x0c00 ++#define bCCKRxAGCReportType 0x0300 ++#define bCCKRxDAGCEn 0x80000000 ++#define bCCKRxDAGCPeriod 0x20000000 ++#define bCCKRxDAGCSatLevel 0x1f000000 ++#define bCCKTimingRecovery 0x800000 ++#define bCCKTxC0 0x3f0000 ++#define bCCKTxC1 0x3f000000 ++#define bCCKTxC2 0x3f ++#define bCCKTxC3 0x3f00 ++#define bCCKTxC4 0x3f0000 ++#define bCCKTxC5 0x3f000000 ++#define bCCKTxC6 0x3f ++#define bCCKTxC7 0x3f00 ++#define bCCKDebugPort 0xff0000 ++#define bCCKDACDebug 0x0f000000 ++#define bCCKFalseAlarmEnable 0x8000 ++#define bCCKFalseAlarmRead 0x4000 ++#define bCCKTRSSI 0x7f ++#define bCCKRxAGCReport 0xfe ++#define bCCKRxReport_AntSel 0x80000000 ++#define bCCKRxReport_MFOff 0x40000000 ++#define bCCKRxRxReport_SQLoss 0x20000000 ++#define bCCKRxReport_Pktloss 0x10000000 ++#define bCCKRxReport_Lockedbit 0x08000000 ++#define bCCKRxReport_RateError 0x04000000 ++#define bCCKRxReport_RxRate 0x03000000 ++#define bCCKRxFACounterLower 0xff ++#define bCCKRxFACounterUpper 0xff000000 ++#define bCCKRxHPAGCStart 0xe000 ++#define bCCKRxHPAGCFinal 0x1c00 ++#define bCCKRxFalseAlarmEnable 0x8000 ++#define bCCKFACounterFreeze 0x4000 ++#define bCCKTxPathSel 0x10000000 ++#define bCCKDefaultRxPath 0xc000000 ++#define bCCKOptionRxPath 0x3000000 ++ ++// 5. PageC(0xC00) ++#define bNumOfSTF 0x3 // Useless ++#define bShift_L 0xc0 ++#define bGI_TH 0xc ++#define bRxPathA 0x1 ++#define bRxPathB 0x2 ++#define bRxPathC 0x4 ++#define bRxPathD 0x8 ++#define bTxPathA 0x1 ++#define bTxPathB 0x2 ++#define bTxPathC 0x4 ++#define bTxPathD 0x8 ++#define bTRSSIFreq 0x200 ++#define bADCBackoff 0x3000 ++#define bDFIRBackoff 0xc000 ++#define bTRSSILatchPhase 0x10000 ++#define bRxIDCOffset 0xff ++#define bRxQDCOffset 0xff00 ++#define bRxDFIRMode 0x1800000 ++#define bRxDCNFType 0xe000000 ++#define bRXIQImb_A 0x3ff ++#define bRXIQImb_B 0xfc00 ++#define bRXIQImb_C 0x3f0000 ++#define bRXIQImb_D 0xffc00000 ++#define bDC_dc_Notch 0x60000 ++#define bRxNBINotch 0x1f000000 ++#define bPD_TH 0xf ++#define bPD_TH_Opt2 0xc000 ++#define bPWED_TH 0x700 ++#define bIfMF_Win_L 0x800 ++#define bPD_Option 0x1000 ++#define bMF_Win_L 0xe000 ++#define bBW_Search_L 0x30000 ++#define bwin_enh_L 0xc0000 ++#define bBW_TH 0x700000 ++#define bED_TH2 0x3800000 ++#define bBW_option 0x4000000 ++#define bRatio_TH 0x18000000 ++#define bWindow_L 0xe0000000 ++#define bSBD_Option 0x1 ++#define bFrame_TH 0x1c ++#define bFS_Option 0x60 ++#define bDC_Slope_check 0x80 ++#define bFGuard_Counter_DC_L 0xe00 ++#define bFrame_Weight_Short 0x7000 ++#define bSub_Tune 0xe00000 ++#define bFrame_DC_Length 0xe000000 ++#define bSBD_start_offset 0x30000000 ++#define bFrame_TH_2 0x7 ++#define bFrame_GI2_TH 0x38 ++#define bGI2_Sync_en 0x40 ++#define bSarch_Short_Early 0x300 ++#define bSarch_Short_Late 0xc00 ++#define bSarch_GI2_Late 0x70000 ++#define bCFOAntSum 0x1 ++#define bCFOAcc 0x2 ++#define bCFOStartOffset 0xc ++#define bCFOLookBack 0x70 ++#define bCFOSumWeight 0x80 ++#define bDAGCEnable 0x10000 ++#define bTXIQImb_A 0x3ff ++#define bTXIQImb_B 0xfc00 ++#define bTXIQImb_C 0x3f0000 ++#define bTXIQImb_D 0xffc00000 ++#define bTxIDCOffset 0xff ++#define bTxQDCOffset 0xff00 ++#define bTxDFIRMode 0x10000 ++#define bTxPesudoNoiseOn 0x4000000 ++#define bTxPesudoNoise_A 0xff ++#define bTxPesudoNoise_B 0xff00 ++#define bTxPesudoNoise_C 0xff0000 ++#define bTxPesudoNoise_D 0xff000000 ++#define bCCADropOption 0x20000 ++#define bCCADropThres 0xfff00000 ++#define bEDCCA_H 0xf ++#define bEDCCA_L 0xf0 ++#define bLambda_ED 0x300 ++#define bRxInitialGain 0x7f ++#define bRxAntDivEn 0x80 ++#define bRxAGCAddressForLNA 0x7f00 ++#define bRxHighPowerFlow 0x8000 ++#define bRxAGCFreezeThres 0xc0000 ++#define bRxFreezeStep_AGC1 0x300000 ++#define bRxFreezeStep_AGC2 0xc00000 ++#define bRxFreezeStep_AGC3 0x3000000 ++#define bRxFreezeStep_AGC0 0xc000000 ++#define bRxRssi_Cmp_En 0x10000000 ++#define bRxQuickAGCEn 0x20000000 ++#define bRxAGCFreezeThresMode 0x40000000 ++#define bRxOverFlowCheckType 0x80000000 ++#define bRxAGCShift 0x7f ++#define bTRSW_Tri_Only 0x80 ++#define bPowerThres 0x300 ++#define bRxAGCEn 0x1 ++#define bRxAGCTogetherEn 0x2 ++#define bRxAGCMin 0x4 ++#define bRxHP_Ini 0x7 ++#define bRxHP_TRLNA 0x70 ++#define bRxHP_RSSI 0x700 ++#define bRxHP_BBP1 0x7000 ++#define bRxHP_BBP2 0x70000 ++#define bRxHP_BBP3 0x700000 ++#define bRSSI_H 0x7f0000 //the threshold for high power ++#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity ++#define bRxSettle_TRSW 0x7 ++#define bRxSettle_LNA 0x38 ++#define bRxSettle_RSSI 0x1c0 ++#define bRxSettle_BBP 0xe00 ++#define bRxSettle_RxHP 0x7000 ++#define bRxSettle_AntSW_RSSI 0x38000 ++#define bRxSettle_AntSW 0xc0000 ++#define bRxProcessTime_DAGC 0x300000 ++#define bRxSettle_HSSI 0x400000 ++#define bRxProcessTime_BBPPW 0x800000 ++#define bRxAntennaPowerShift 0x3000000 ++#define bRSSITableSelect 0xc000000 ++#define bRxHP_Final 0x7000000 ++#define bRxHTSettle_BBP 0x7 ++#define bRxHTSettle_HSSI 0x8 ++#define bRxHTSettle_RxHP 0x70 ++#define bRxHTSettle_BBPPW 0x80 ++#define bRxHTSettle_Idle 0x300 ++#define bRxHTSettle_Reserved 0x1c00 ++#define bRxHTRxHPEn 0x8000 ++#define bRxHTAGCFreezeThres 0x30000 ++#define bRxHTAGCTogetherEn 0x40000 ++#define bRxHTAGCMin 0x80000 ++#define bRxHTAGCEn 0x100000 ++#define bRxHTDAGCEn 0x200000 ++#define bRxHTRxHP_BBP 0x1c00000 ++#define bRxHTRxHP_Final 0xe0000000 ++#define bRxPWRatioTH 0x3 ++#define bRxPWRatioEn 0x4 ++#define bRxMFHold 0x3800 ++#define bRxPD_Delay_TH1 0x38 ++#define bRxPD_Delay_TH2 0x1c0 ++#define bRxPD_DC_COUNT_MAX 0x600 ++//#define bRxMF_Hold 0x3800 ++#define bRxPD_Delay_TH 0x8000 ++#define bRxProcess_Delay 0xf0000 ++#define bRxSearchrange_GI2_Early 0x700000 ++#define bRxFrame_Guard_Counter_L 0x3800000 ++#define bRxSGI_Guard_L 0xc000000 ++#define bRxSGI_Search_L 0x30000000 ++#define bRxSGI_TH 0xc0000000 ++#define bDFSCnt0 0xff ++#define bDFSCnt1 0xff00 ++#define bDFSFlag 0xf0000 ++#define bMFWeightSum 0x300000 ++#define bMinIdxTH 0x7f000000 ++#define bDAFormat 0x40000 ++#define bTxChEmuEnable 0x01000000 ++#define bTRSWIsolation_A 0x7f ++#define bTRSWIsolation_B 0x7f00 ++#define bTRSWIsolation_C 0x7f0000 ++#define bTRSWIsolation_D 0x7f000000 ++#define bExtLNAGain 0x7c00 ++ ++// 6. PageE(0xE00) ++#define bSTBCEn 0x4 // Useless ++#define bAntennaMapping 0x10 ++#define bNss 0x20 ++#define bCFOAntSumD 0x200 ++#define bPHYCounterReset 0x8000000 ++#define bCFOReportGet 0x4000000 ++#define bOFDMContinueTx 0x10000000 ++#define bOFDMSingleCarrier 0x20000000 ++#define bOFDMSingleTone 0x40000000 ++//#define bRxPath1 0x01 ++//#define bRxPath2 0x02 ++//#define bRxPath3 0x04 ++//#define bRxPath4 0x08 ++//#define bTxPath1 0x10 ++//#define bTxPath2 0x20 ++#define bHTDetect 0x100 ++#define bCFOEn 0x10000 ++#define bCFOValue 0xfff00000 ++#define bSigTone_Re 0x3f ++#define bSigTone_Im 0x7f00 ++#define bCounter_CCA 0xffff ++#define bCounter_ParityFail 0xffff0000 ++#define bCounter_RateIllegal 0xffff ++#define bCounter_CRC8Fail 0xffff0000 ++#define bCounter_MCSNoSupport 0xffff ++#define bCounter_FastSync 0xffff ++#define bShortCFO 0xfff ++#define bShortCFOTLength 12 //total ++#define bShortCFOFLength 11 //fraction ++#define bLongCFO 0x7ff ++#define bLongCFOTLength 11 ++#define bLongCFOFLength 11 ++#define bTailCFO 0x1fff ++#define bTailCFOTLength 13 ++#define bTailCFOFLength 12 ++#define bmax_en_pwdB 0xffff ++#define bCC_power_dB 0xffff0000 ++#define bnoise_pwdB 0xffff ++#define bPowerMeasTLength 10 ++#define bPowerMeasFLength 3 ++#define bRx_HT_BW 0x1 ++#define bRxSC 0x6 ++#define bRx_HT 0x8 ++#define bNB_intf_det_on 0x1 ++#define bIntf_win_len_cfg 0x30 ++#define bNB_Intf_TH_cfg 0x1c0 ++#define bRFGain 0x3f ++#define bTableSel 0x40 ++#define bTRSW 0x80 ++#define bRxSNR_A 0xff ++#define bRxSNR_B 0xff00 ++#define bRxSNR_C 0xff0000 ++#define bRxSNR_D 0xff000000 ++#define bSNREVMTLength 8 ++#define bSNREVMFLength 1 ++#define bCSI1st 0xff ++#define bCSI2nd 0xff00 ++#define bRxEVM1st 0xff0000 ++#define bRxEVM2nd 0xff000000 ++#define bSIGEVM 0xff ++#define bPWDB 0xff00 ++#define bSGIEN 0x10000 ++ ++#define bSFactorQAM1 0xf // Useless ++#define bSFactorQAM2 0xf0 ++#define bSFactorQAM3 0xf00 ++#define bSFactorQAM4 0xf000 ++#define bSFactorQAM5 0xf0000 ++#define bSFactorQAM6 0xf0000 ++#define bSFactorQAM7 0xf00000 ++#define bSFactorQAM8 0xf000000 ++#define bSFactorQAM9 0xf0000000 ++#define bCSIScheme 0x100000 ++ ++#define bNoiseLvlTopSet 0x3 // Useless ++#define bChSmooth 0x4 ++#define bChSmoothCfg1 0x38 ++#define bChSmoothCfg2 0x1c0 ++#define bChSmoothCfg3 0xe00 ++#define bChSmoothCfg4 0x7000 ++#define bMRCMode 0x800000 ++#define bTHEVMCfg 0x7000000 ++ ++#define bLoopFitType 0x1 // Useless ++#define bUpdCFO 0x40 ++#define bUpdCFOOffData 0x80 ++#define bAdvUpdCFO 0x100 ++#define bAdvTimeCtrl 0x800 ++#define bUpdClko 0x1000 ++#define bFC 0x6000 ++#define bTrackingMode 0x8000 ++#define bPhCmpEnable 0x10000 ++#define bUpdClkoLTF 0x20000 ++#define bComChCFO 0x40000 ++#define bCSIEstiMode 0x80000 ++#define bAdvUpdEqz 0x100000 ++#define bUChCfg 0x7000000 ++#define bUpdEqz 0x8000000 ++ ++//Rx Pseduo noise ++#define bRxPesudoNoiseOn 0x20000000 // Useless ++#define bRxPesudoNoise_A 0xff ++#define bRxPesudoNoise_B 0xff00 ++#define bRxPesudoNoise_C 0xff0000 ++#define bRxPesudoNoise_D 0xff000000 ++#define bPesudoNoiseState_A 0xffff ++#define bPesudoNoiseState_B 0xffff0000 ++#define bPesudoNoiseState_C 0xffff ++#define bPesudoNoiseState_D 0xffff0000 ++ ++//7. RF Register ++//Zebra1 ++#define bZebra1_HSSIEnable 0x8 // Useless ++#define bZebra1_TRxControl 0xc00 ++#define bZebra1_TRxGainSetting 0x07f ++#define bZebra1_RxCorner 0xc00 ++#define bZebra1_TxChargePump 0x38 ++#define bZebra1_RxChargePump 0x7 ++#define bZebra1_ChannelNum 0xf80 ++#define bZebra1_TxLPFBW 0x400 ++#define bZebra1_RxLPFBW 0x600 ++ ++//Zebra4 ++#define bRTL8256RegModeCtrl1 0x100 // Useless ++#define bRTL8256RegModeCtrl0 0x40 ++#define bRTL8256_TxLPFBW 0x18 ++#define bRTL8256_RxLPFBW 0x600 ++ ++//RTL8258 ++#define bRTL8258_TxLPFBW 0xc // Useless ++#define bRTL8258_RxLPFBW 0xc00 ++#define bRTL8258_RSSILPFBW 0xc0 ++ ++ ++// ++// Other Definition ++// ++ ++//byte endable for sb_write ++#define bByte0 0x1 // Useless ++#define bByte1 0x2 ++#define bByte2 0x4 ++#define bByte3 0x8 ++#define bWord0 0x3 ++#define bWord1 0xc ++#define bDWord 0xf ++ ++//for PutRegsetting & GetRegSetting BitMask ++#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f ++#define bMaskByte1 0xff00 ++#define bMaskByte2 0xff0000 ++#define bMaskByte3 0xff000000 ++#define bMaskHWord 0xffff0000 ++#define bMaskLWord 0x0000ffff ++#define bMaskDWord 0xffffffff ++#define bMask12Bits 0xfff ++#define bMaskH4Bits 0xf0000000 ++#define bMaskOFDM_D 0xffc00000 ++#define bMaskCCK 0x3f3f3f3f ++ ++//for PutRFRegsetting & GetRFRegSetting BitMask ++//#define bMask12Bits 0xfffff // RF Reg mask bits ++//#define bMask20Bits 0xfffff // RF Reg mask bits T65 RF ++#define bRFRegOffsetMask 0xfffff ++//#define bRFRegOffsetMask 0xfff ++ ++//MAC0 will wirte PHY1 ++#define MAC0_ACCESS_PHY1 0x4000 ++//MAC1 will wirte PHY0 ++#define MAC1_ACCESS_PHY0 0x2000 ++ ++#define bEnable 0x1 // Useless ++#define bDisable 0x0 ++ ++#define LeftAntenna 0x0 // Useless ++#define RightAntenna 0x1 ++ ++#define tCheckTxStatus 500 //500ms // Useless ++#define tUpdateRxCounter 100 //100ms ++ ++#define rateCCK 0 // Useless ++#define rateOFDM 1 ++#define rateHT 2 ++ ++//define Register-End ++#define bPMAC_End 0x1ff // Useless ++#define bFPGAPHY0_End 0x8ff ++#define bFPGAPHY1_End 0x9ff ++#define bCCKPHY0_End 0xaff ++#define bOFDMPHY0_End 0xcff ++#define bOFDMPHY1_End 0xdff ++ ++//define max debug item in each debug page ++//#define bMaxItem_FPGA_PHY0 0x9 ++//#define bMaxItem_FPGA_PHY1 0x3 ++//#define bMaxItem_PHY_11B 0x16 ++//#define bMaxItem_OFDM_PHY0 0x29 ++//#define bMaxItem_OFDM_PHY1 0x0 ++ ++#define bPMACControl 0x0 // Useless ++#define bWMACControl 0x1 ++#define bWNICControl 0x2 ++ ++#define PathA 0x0 // Useless ++#define PathB 0x1 ++#define PathC 0x2 ++#define PathD 0x3 ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++#endif //__INC_HAL8192SPHYREG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg.h +new file mode 100644 +index 000000000000..0d225cefa74d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg.h +@@ -0,0 +1,66 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192DU_FW_IMG_H ++#define __INC_HAL8192DU_FW_IMG_H ++ ++#include ++ ++/*Created on 2011/11/11, 8: 8*/ ++ ++#define Rtl8192DUImgArrayLength 31452 ++extern const u8 Rtl8192DUFwImgArray[Rtl8192DUImgArrayLength]; ++#define Rtl8192DUMainArrayLength 1 ++extern const u8 Rtl8192DUFwMainArray[Rtl8192DUMainArrayLength]; ++#define Rtl8192DUDataArrayLength 1 ++extern const u8 Rtl8192DUFwDataArray[Rtl8192DUDataArrayLength]; ++#define Rtl8192DUPHY_REG_2TArrayLength 372 ++extern const u32 Rtl8192DUPHY_REG_2TArray[Rtl8192DUPHY_REG_2TArrayLength]; ++#define Rtl8192DUPHY_REG_1TArrayLength 1 ++extern const u32 Rtl8192DUPHY_REG_1TArray[Rtl8192DUPHY_REG_1TArrayLength]; ++#define Rtl8192DUPHY_REG_Array_PGLength 624 ++extern const u32 Rtl8192DUPHY_REG_Array_PG[Rtl8192DUPHY_REG_Array_PGLength]; ++#define Rtl8192DUPHY_REG_Array_MPLength 14 ++extern const u32 Rtl8192DUPHY_REG_Array_MP[Rtl8192DUPHY_REG_Array_MPLength]; ++#define Rtl8192DURadioA_2TArrayLength 378 ++extern const u32 Rtl8192DURadioA_2TArray[Rtl8192DURadioA_2TArrayLength]; ++#define Rtl8192DURadioB_2TArrayLength 384 ++extern const u32 Rtl8192DURadioB_2TArray[Rtl8192DURadioB_2TArrayLength]; ++#define Rtl8192DURadioA_1TArrayLength 1 ++extern const u32 Rtl8192DURadioA_1TArray[Rtl8192DURadioA_1TArrayLength]; ++#define Rtl8192DURadioB_1TArrayLength 1 ++extern const u32 Rtl8192DURadioB_1TArray[Rtl8192DURadioB_1TArrayLength]; ++#define Rtl8192DURadioA_2T_intPAArrayLength 378 ++extern const u32 Rtl8192DURadioA_2T_intPAArray[Rtl8192DURadioA_2T_intPAArrayLength]; ++#define Rtl8192DURadioB_2T_intPAArrayLength 384 ++extern const u32 Rtl8192DURadioB_2T_intPAArray[Rtl8192DURadioB_2T_intPAArrayLength]; ++#define Rtl8192DUMAC_2T_ArrayLength 192 ++extern const u32 Rtl8192DUMAC_2T_Array[Rtl8192DUMAC_2T_ArrayLength]; ++#define Rtl8192DUAGCTAB_ArrayLength 386 ++extern const u32 Rtl8192DUAGCTAB_Array[Rtl8192DUAGCTAB_ArrayLength]; ++#define Rtl8192DUAGCTAB_5GArrayLength 194 ++extern const u32 Rtl8192DUAGCTAB_5GArray[Rtl8192DUAGCTAB_5GArrayLength]; ++#define Rtl8192DUAGCTAB_2GArrayLength 194 ++extern const u32 Rtl8192DUAGCTAB_2GArray[Rtl8192DUAGCTAB_2GArrayLength]; ++#define Rtl8192DUAGCTAB_2TArrayLength 1 ++extern const u32 Rtl8192DUAGCTAB_2TArray[Rtl8192DUAGCTAB_2TArrayLength]; ++#define Rtl8192DUAGCTAB_1TArrayLength 1 ++extern const u32 Rtl8192DUAGCTAB_1TArray[Rtl8192DUAGCTAB_1TArrayLength]; ++ ++#endif //__INC_HAL8192CU_FW_IMG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg_wowlan.h b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg_wowlan.h +new file mode 100644 +index 000000000000..b5ab71f99967 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/Hal8192DUHWImg_wowlan.h +@@ -0,0 +1,29 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __INC_HAL8192DU_FW_IMG_WOWLAN_H ++#define __INC_HAL8192DU_FW_IMG_WOWLAN_H ++ ++/*Created on 2011/11/ 8, 14:15*/ ++ ++ ++#define DUWWImgArrayLength 24818 ++extern u8 Rtl8192DUFwWWImgArray[DUWWImgArrayLength]; ++ ++#endif //__INC_HAL8192DU_FW_IMG_WOWLAN_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/HalPwrSeqCmd.h b/drivers/net/wireless/realtek/rtl8192cu/include/HalPwrSeqCmd.h +new file mode 100644 +index 000000000000..e5d151cfdfba +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/HalPwrSeqCmd.h +@@ -0,0 +1,137 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __HALPWRSEQCMD_H__ ++#define __HALPWRSEQCMD_H__ ++ ++#include ++ ++/*---------------------------------------------*/ ++//3 The value of cmd: 4 bits ++/*---------------------------------------------*/ ++#define PWR_CMD_READ 0x00 ++ // offset: the read register offset ++ // msk: the mask of the read value ++ // value: N/A, left by 0 ++ // note: dirver shall implement this function by read & msk ++ ++#define PWR_CMD_WRITE 0x01 ++ // offset: the read register offset ++ // msk: the mask of the write bits ++ // value: write value ++ // note: driver shall implement this cmd by read & msk after write ++ ++#define PWR_CMD_POLLING 0x02 ++ // offset: the read register offset ++ // msk: the mask of the polled value ++ // value: the value to be polled, masked by the msd field. ++ // note: driver shall implement this cmd by ++ // do{ ++ // if( (Read(offset) & msk) == (value & msk) ) ++ // break; ++ // } while(not timeout); ++ ++#define PWR_CMD_DELAY 0x03 ++ // offset: the value to delay ++ // msk: N/A ++ // value: the unit of delay, 0: us, 1: ms ++ ++#define PWR_CMD_END 0x04 ++ // offset: N/A ++ // msk: N/A ++ // value: N/A ++ ++/*---------------------------------------------*/ ++//3 The value of base: 4 bits ++/*---------------------------------------------*/ ++ // define the base address of each block ++#define PWR_BASEADDR_MAC 0x00 ++#define PWR_BASEADDR_USB 0x01 ++#define PWR_BASEADDR_PCIE 0x02 ++#define PWR_BASEADDR_SDIO 0x03 ++ ++/*---------------------------------------------*/ ++//3 The value of interface_msk: 4 bits ++/*---------------------------------------------*/ ++#define PWR_INTF_SDIO_MSK BIT(0) ++#define PWR_INTF_USB_MSK BIT(1) ++#define PWR_INTF_PCI_MSK BIT(2) ++#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3)) ++ ++/*---------------------------------------------*/ ++//3 The value of fab_msk: 4 bits ++/*---------------------------------------------*/ ++#define PWR_FAB_TSMC_MSK BIT(0) ++#define PWR_FAB_UMC_MSK BIT(1) ++#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3)) ++ ++/*---------------------------------------------*/ ++//3 The value of cut_msk: 8 bits ++/*---------------------------------------------*/ ++#define PWR_CUT_TESTCHIP_MSK BIT(0) ++#define PWR_CUT_A_MSK BIT(1) ++#define PWR_CUT_B_MSK BIT(2) ++#define PWR_CUT_C_MSK BIT(3) ++#define PWR_CUT_D_MSK BIT(4) ++#define PWR_CUT_E_MSK BIT(5) ++#define PWR_CUT_F_MSK BIT(6) ++#define PWR_CUT_G_MSK BIT(7) ++#define PWR_CUT_ALL_MSK 0xFF ++ ++ ++typedef enum _PWRSEQ_CMD_DELAY_UNIT_ ++{ ++ PWRSEQ_DELAY_US, ++ PWRSEQ_DELAY_MS, ++} PWRSEQ_DELAY_UNIT; ++ ++typedef struct _WL_PWR_CFG_ ++{ ++ u16 offset; ++ u8 cut_msk; ++ u8 fab_msk:4; ++ u8 interface_msk:4; ++ u8 base:4; ++ u8 cmd:4; ++ u8 msk; ++ u8 value; ++} WLAN_PWR_CFG, *PWLAN_PWR_CFG; ++ ++ ++#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset ++#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk ++#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk ++#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk ++#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base ++#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd ++#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk ++#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value ++ ++ ++//================================================================================ ++// Prototype of protected function. ++//================================================================================ ++u8 HalPwrSeqCmdParsing( ++ PADAPTER padapter, ++ u8 CutVersion, ++ u8 FabVersion, ++ u8 InterfaceType, ++ WLAN_PWR_CFG PwrCfgCmd[]); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h b/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h +new file mode 100644 +index 000000000000..dcdb512263bf +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h +@@ -0,0 +1,336 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++/* ++ * Public General Config ++ */ ++#define AUTOCONF_INCLUDED ++#define RTL871X_MODULE_NAME "92CU" ++#define DRV_NAME "rtl8192cu" ++ ++#define CONFIG_USB_HCI 1 ++ ++#define CONFIG_RTL8192C 1 ++ ++#define PLATFORM_LINUX 1 ++ ++//#define CONFIG_IOCTL_CFG80211 1 ++#ifdef CONFIG_IOCTL_CFG80211 ++ //#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */ ++ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER ++ //#define CONFIG_DEBUG_CFG80211 1 ++ //#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2 ++ #define CONFIG_SET_SCAN_DENY_TIMER ++#endif ++ ++/* ++ * Internal General Config ++ */ ++//#define CONFIG_PWRCTRL ++//#define CONFIG_H2CLBK ++ ++#define CONFIG_EMBEDDED_FWIMG 1 ++//#define CONFIG_FILE_FWIMG ++ ++#ifdef CONFIG_WAKE_ON_WLAN ++#define CONFIG_WOWLAN 1 ++#endif //CONFIG_WAKE_ON_WLAN ++ ++#define CONFIG_R871X_TEST 1 ++ ++#define CONFIG_XMIT_ACK ++#ifdef CONFIG_XMIT_ACK ++ #define CONFIG_XMIT_ACK_POLLING ++ #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK ++#endif ++ ++#define CONFIG_80211N_HT 1 ++ ++#define CONFIG_RECV_REORDERING_CTRL 1 ++ ++//#define CONFIG_TCP_CSUM_OFFLOAD_RX 1 ++ ++//#define CONFIG_BEFORE_LINKED_DIG ++//#define CONFIG_DRVEXT_MODULE 1 ++ ++#ifndef CONFIG_MP_INCLUDED ++ #define CONFIG_IPS 1 ++ #ifdef CONFIG_IPS ++ //#define CONFIG_IPS_LEVEL_2 1 //enable this to set default IPS mode to IPS_LEVEL_2 ++ #endif ++ ++ #define SUPPORT_HW_RFOFF_DETECTED 1 ++ ++ #define CONFIG_LPS 1 ++ #define CONFIG_BT_COEXIST 1 ++ ++ //befor link ++ #define CONFIG_ANTENNA_DIVERSITY ++ ++ //after link ++ #ifdef CONFIG_ANTENNA_DIVERSITY ++ #define CONFIG_SW_ANTENNA_DIVERSITY ++ //#define CONFIG_HW_ANTENNA_DIVERSITY ++ #endif ++ ++ #define CONFIG_IOL ++#else //#ifndef CONFIG_MP_INCLUDED ++ #define CONFIG_MP_IWPRIV_SUPPORT 1 ++#endif //#ifndef CONFIG_MP_INCLUDED ++ ++#define CONFIG_AP_MODE 1 ++#ifdef CONFIG_AP_MODE ++ #define CONFIG_NATIVEAP_MLME 1 ++ #ifndef CONFIG_NATIVEAP_MLME ++ #define CONFIG_HOSTAPD_MLME 1 ++ #endif ++ #define CONFIG_FIND_BEST_CHANNEL 1 ++ //#define CONFIG_NO_WIRELESS_HANDLERS 1 ++#endif ++ ++// Added by Albert 20110314 ++#define CONFIG_P2P 1 ++#ifdef CONFIG_P2P ++ //Added by Albert 20110812 ++ //The CONFIG_WFD is for supporting the Wi-Fi display ++ #define CONFIG_WFD ++ ++ #ifndef CONFIG_WIFI_TEST ++ #define CONFIG_P2P_REMOVE_GROUP_INFO ++ #endif ++ //#define CONFIG_DBG_P2P ++ ++ //#define CONFIG_P2P_PS ++ //#define CONFIG_P2P_IPS ++ ++ #define P2P_OP_CHECK_SOCIAL_CH ++ // Added comment by Borg 2013/06/21 ++ // Issue: Nexus 4 is hard to do miracast. ++ // Root Cause: After group formation, ++ // Nexus 4 is possible to be not at OP channel of Invitation Resp/Nego Confirm but at social channel. ++ // Patch: While scan OP channel, ++ // not only scan OP channel of Invitation Resp/Nego Confirm, ++ // but also scan social channel(1, 6, 11) ++#endif ++ ++// Added by Kurt 20110511 ++//#define CONFIG_TDLS 1 ++#ifdef CONFIG_TDLS ++// #ifndef CONFIG_WFD ++// #define CONFIG_WFD 1 ++// #endif ++// #define CONFIG_TDLS_AUTOSETUP 1 ++// #define CONFIG_TDLS_AUTOCHECKALIVE 1 ++#endif ++ ++#define CONFIG_SKB_COPY 1//for amsdu ++ ++#define CONFIG_LED ++#ifdef CONFIG_LED ++ #define CONFIG_SW_LED ++ #ifdef CONFIG_SW_LED ++ //#define CONFIG_LED_HANDLED_BY_CMD_THREAD ++ #endif ++#endif // CONFIG_LED ++ ++ ++ ++#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface ++#define CONFIG_GLOBAL_UI_PID ++ ++#define CONFIG_LAYER2_ROAMING ++#define CONFIG_LAYER2_ROAMING_RESUME ++//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general... ++//#define CONFIG_RESUME_IN_WORKQUEUE ++//#define CONFIG_SET_SCAN_DENY_TIMER ++#define CONFIG_LONG_DELAY_ISSUE ++#define CONFIG_NEW_SIGNAL_STAT_PROCESS ++//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm ++#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable */ ++#define CONFIG_DEAUTH_BEFORE_CONNECT ++ ++#ifdef CONFIG_IOL ++ #define CONFIG_IOL_LLT ++ #define CONFIG_IOL_MAC ++ #define CONFIG_IOL_BB_PHY_REG ++ #define CONFIG_IOL_BB_AGC_TAB ++ #define CONFIG_IOL_RF_RF90_PATH_A ++ #define CONFIG_IOL_RF_RF90_PATH_B ++#endif ++ ++#define CONFIG_BR_EXT 1 // Enable NAT2.5 support for STA mode interface with a L2 Bridge ++#ifdef CONFIG_BR_EXT ++#define CONFIG_BR_EXT_BRNAME "br0" ++#endif // CONFIG_BR_EXT ++ ++#define CONFIG_TX_MCAST2UNI 1 // Support IP multicast->unicast ++//#define CONFIG_DM_ADAPTIVITY ++//#define CONFIG_CHECK_AC_LIFETIME 1 // Check packet lifetime of 4 ACs. ++ ++//#define CONFIG_CONCURRENT_MODE 1 ++#ifdef CONFIG_CONCURRENT_MODE ++ #define CONFIG_TSF_RESET_OFFLOAD 1 // For 2 PORT TSF SYNC. ++ //#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri ++ //#define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE ++ //#define CONFIG_MULTI_VIR_IFACES //besides primary&secondary interfaces, extend to support more interfaces ++#endif // CONFIG_CONCURRENT_MODE ++ ++#define CONFIG_80211D ++ ++/* ++ * Interface Related Config ++ */ ++ ++//#define CONFIG_USB_ONE_OUT_EP ++//#define CONFIG_USB_INTERRUPT_IN_PIPE 1 ++ ++#ifndef CONFIG_MINIMAL_MEMORY_USAGE ++ #define CONFIG_USB_TX_AGGREGATION 1 ++ #define CONFIG_USB_RX_AGGREGATION 1 ++#endif ++ ++#define CONFIG_PREALLOC_RECV_SKB 1 ++//#define CONFIG_REDUCE_USB_TX_INT 1 // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. ++//#define CONFIG_EASY_REPLACEMENT 1 ++ ++/* ++ * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! ++ */ ++//#define CONFIG_USE_USB_BUFFER_ALLOC_TX 1 // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. ++//#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1 // For RX path ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++#undef CONFIG_PREALLOC_RECV_SKB ++#endif ++ ++/* ++ * USB VENDOR REQ BUFFER ALLOCATION METHOD ++ * if not set we'll use function local variable (stack memory) ++ */ ++//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE ++#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC ++ ++#define CONFIG_USB_VENDOR_REQ_MUTEX ++#define CONFIG_VENDOR_REQ_RETRY ++ ++//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1 ++ ++ ++/* ++ * HAL Related Config ++ */ ++ ++#define RTL8192C_RX_PACKET_NO_INCLUDE_CRC 1 ++ ++#define SUPPORTED_BLOCK_IO ++ ++ ++ ++#define RTL8192CU_FW_DOWNLOAD_ENABLE 1 ++ ++#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 ++ ++#define CONFIG_OUT_EP_WIFI_MODE 0 ++ ++#define ENABLE_USB_DROP_INCORRECT_OUT 0 ++ ++#define RTL8192CU_ASIC_VERIFICATION 0 // For ASIC verification. ++ ++#define RTL8192CU_ADHOC_WORKAROUND_SETTING 1 ++ ++#define DISABLE_BB_RF 0 ++ ++#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0 ++ ++#ifdef CONFIG_MP_INCLUDED ++ #define MP_DRIVER 1 ++ #undef CONFIG_USB_TX_AGGREGATION ++ #undef CONFIG_USB_RX_AGGREGATION ++#else ++ #define MP_DRIVER 0 ++#endif ++ ++ ++/* ++ * Platform Related Config ++ */ ++#ifdef CONFIG_PLATFORM_MN10300 ++#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV ++ ++#if defined (CONFIG_SW_ANTENNA_DIVERSITY) ++ #undef CONFIG_SW_ANTENNA_DIVERSITY ++ #define CONFIG_HW_ANTENNA_DIVERSITY ++#endif ++ ++#endif ++ ++#ifdef CONFIG_WISTRON_PLATFORM ++ ++#endif ++ ++#ifdef CONFIG_PLATFORM_TI_DM365 ++#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1 ++#endif ++ ++#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR ++ ++/* ++ * Debug Related Config ++ */ ++//#define CONFIG_DEBUG_RTL871X ++ ++#define DBG 0 ++//#define CONFIG_DEBUG_RTL819X ++ ++//#define CONFIG_PROC_DEBUG 1 ++ ++//#define DBG_IO ++//#define DBG_DELAY_OS ++//#define DBG_MEM_ALLOC ++//#define DBG_IOCTL ++ ++//#define DBG_TX ++//#define DBG_XMIT_BUF ++//#define DBG_TX_DROP_FRAME ++ ++//#define DBG_RX_DROP_FRAME ++//#define DBG_RX_SEQ ++//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING ++//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" ++ ++//#define DBG_EXPIRATION_CHK ++ ++ ++//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE ++//#define DBG_ROAMING_TEST ++ ++//#define DBG_HAL_INIT_PROFILING ++ ++//#define DBG_MEMORY_LEAK 1 ++ ++#define DBG_CONFIG_ERROR_DETECT ++//#define DBG_CONFIG_ERROR_RESET ++ ++//TX use 1 urb ++//#define CONFIG_SINGLE_XMIT_BUF ++//RX use 1 urb ++//#define CONFIG_SINGLE_RECV_BUF ++ ++//turn off power tracking when traffic is busy ++//#define CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/basic_types.h b/drivers/net/wireless/realtek/rtl8192cu/include/basic_types.h +new file mode 100644 +index 000000000000..c52fe3a6222d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/basic_types.h +@@ -0,0 +1,320 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __BASIC_TYPES_H__ ++#define __BASIC_TYPES_H__ ++ ++#include ++ ++ ++#define SUCCESS 0 ++#define FAIL (-1) ++ ++#ifndef TRUE ++ #define _TRUE 1 ++#else ++ #define _TRUE TRUE ++#endif ++ ++#ifndef FALSE ++ #define _FALSE 0 ++#else ++ #define _FALSE FALSE ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++ typedef signed char s8; ++ typedef unsigned char u8; ++ ++ typedef signed short s16; ++ typedef unsigned short u16; ++ ++ typedef signed long s32; ++ typedef unsigned long u32; ++ ++ typedef unsigned int uint; ++ typedef signed int sint; ++ ++ ++ typedef signed long long s64; ++ typedef unsigned long long u64; ++ ++ #ifdef NDIS50_MINIPORT ++ ++ #define NDIS_MAJOR_VERSION 5 ++ #define NDIS_MINOR_VERSION 0 ++ ++ #endif ++ ++ #ifdef NDIS51_MINIPORT ++ ++ #define NDIS_MAJOR_VERSION 5 ++ #define NDIS_MINOR_VERSION 1 ++ ++ #endif ++ ++ typedef NDIS_PROC proc_t; ++ ++ typedef LONG atomic_t; ++ ++#endif ++ ++ ++#ifdef PLATFORM_LINUX ++ ++ #include ++ #define IN ++ #define OUT ++ #define VOID void ++ #define NDIS_OID uint ++ #define NDIS_STATUS uint ++ ++ typedef signed int sint; ++ ++ #ifndef PVOID ++ typedef void * PVOID; ++ //#define PVOID (void *) ++ #endif ++ ++ #define UCHAR u8 ++ #define USHORT u16 ++ #define UINT u32 ++ #define ULONG u32 ++ ++ typedef void (*proc_t)(void*); ++ ++ typedef __kernel_size_t SIZE_T; ++ typedef __kernel_ssize_t SSIZE_T; ++ #define FIELD_OFFSET(s,field) ((SSIZE_T)&((s*)(0))->field) ++ ++#endif ++ ++ ++#ifdef PLATFORM_FREEBSD ++ ++ typedef signed char s8; ++ typedef unsigned char u8; ++ ++ typedef signed short s16; ++ typedef unsigned short u16; ++ ++ typedef signed int s32; ++ typedef unsigned int u32; ++ ++ typedef unsigned int uint; ++ typedef signed int sint; ++ typedef long atomic_t; ++ ++ typedef signed long long s64; ++ typedef unsigned long long u64; ++ #define IN ++ #define OUT ++ #define VOID void ++ #define NDIS_OID uint ++ #define NDIS_STATUS uint ++ ++ #ifndef PVOID ++ typedef void * PVOID; ++ //#define PVOID (void *) ++ #endif ++ typedef u32 dma_addr_t; ++ #define UCHAR u8 ++ #define USHORT u16 ++ #define UINT u32 ++ #define ULONG u32 ++ ++ typedef void (*proc_t)(void*); ++ ++ typedef unsigned int __kernel_size_t; ++ typedef int __kernel_ssize_t; ++ ++ typedef __kernel_size_t SIZE_T; ++ typedef __kernel_ssize_t SSIZE_T; ++ #define FIELD_OFFSET(s,field) ((SSIZE_T)&((s*)(0))->field) ++ ++#endif ++ ++#define MEM_ALIGNMENT_OFFSET (sizeof (SIZE_T)) ++#define MEM_ALIGNMENT_PADDING (sizeof(SIZE_T) - 1) ++ ++#define SIZE_PTR SIZE_T ++#define SSIZE_PTR SSIZE_T ++ ++//port from fw by thomas ++// TODO: Belows are Sync from SD7-Driver. It is necessary to check correctness ++ ++/* ++ * Call endian free function when ++ * 1. Read/write packet content. ++ * 2. Before write integer to IO. ++ * 3. After read integer from IO. ++*/ ++ ++// ++// Byte Swapping routine. ++// ++#define EF1Byte ++#define EF2Byte le16_to_cpu ++#define EF4Byte le32_to_cpu ++ ++// ++// Read LE format data from memory ++// ++#define ReadEF1Byte(_ptr) EF1Byte(*((u8 *)(_ptr))) ++#define ReadEF2Byte(_ptr) EF2Byte(*((u16 *)(_ptr))) ++#define ReadEF4Byte(_ptr) EF4Byte(*((u32 *)(_ptr))) ++ ++// ++// Write LE data to memory ++// ++#define WriteEF1Byte(_ptr, _val) (*((u8 *)(_ptr)))=EF1Byte(_val) ++#define WriteEF2Byte(_ptr, _val) (*((u16 *)(_ptr)))=EF2Byte(_val) ++#define WriteEF4Byte(_ptr, _val) (*((u32 *)(_ptr)))=EF4Byte(_val) ++ ++// ++// Example: ++// BIT_LEN_MASK_32(0) => 0x00000000 ++// BIT_LEN_MASK_32(1) => 0x00000001 ++// BIT_LEN_MASK_32(2) => 0x00000003 ++// BIT_LEN_MASK_32(32) => 0xFFFFFFFF ++// ++#define BIT_LEN_MASK_32(__BitLen) \ ++ (0xFFFFFFFF >> (32 - (__BitLen))) ++// ++// Example: ++// BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003 ++// BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000 ++// ++#define BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) \ ++ (BIT_LEN_MASK_32(__BitLen) << (__BitOffset)) ++ ++// ++// Description: ++// Return 4-byte value in host byte ordering from ++// 4-byte pointer in litten-endian system. ++// ++#define LE_P4BYTE_TO_HOST_4BYTE(__pStart) \ ++ (EF4Byte(*((u32 *)(__pStart)))) ++ ++// ++// Description: ++// Translate subfield (continuous bits in little-endian) of 4-byte value in litten byte to ++// 4-byte value in host byte ordering. ++// ++#define LE_BITS_TO_4BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ ( LE_P4BYTE_TO_HOST_4BYTE(__pStart) >> (__BitOffset) ) \ ++ & \ ++ BIT_LEN_MASK_32(__BitLen) \ ++ ) ++ ++// ++// Description: ++// Mask subfield (continuous bits in little-endian) of 4-byte value in litten byte oredering ++// and return the result in 4-byte value in host byte ordering. ++// ++#define LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ LE_P4BYTE_TO_HOST_4BYTE(__pStart) \ ++ & \ ++ ( ~BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) ) \ ++ ) ++ ++// ++// Description: ++// Set subfield of little-endian 4-byte value to specified value. ++// ++#define SET_BITS_TO_LE_4BYTE(__pStart, __BitOffset, __BitLen, __Value) \ ++ *((u32 *)(__pStart)) = \ ++ EF4Byte( \ ++ LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \ ++ | \ ++ ( (((u32)__Value) & BIT_LEN_MASK_32(__BitLen)) << (__BitOffset) ) \ ++ ); ++ ++ ++#define BIT_LEN_MASK_16(__BitLen) \ ++ (0xFFFF >> (16 - (__BitLen))) ++ ++#define BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) \ ++ (BIT_LEN_MASK_16(__BitLen) << (__BitOffset)) ++ ++#define LE_P2BYTE_TO_HOST_2BYTE(__pStart) \ ++ (EF2Byte(*((u16 *)(__pStart)))) ++ ++#define LE_BITS_TO_2BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ ( LE_P2BYTE_TO_HOST_2BYTE(__pStart) >> (__BitOffset) ) \ ++ & \ ++ BIT_LEN_MASK_16(__BitLen) \ ++ ) ++ ++#define LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ LE_P2BYTE_TO_HOST_2BYTE(__pStart) \ ++ & \ ++ ( ~BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) ) \ ++ ) ++ ++#define SET_BITS_TO_LE_2BYTE(__pStart, __BitOffset, __BitLen, __Value) \ ++ *((u16 *)(__pStart)) = \ ++ EF2Byte( \ ++ LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \ ++ | \ ++ ( (((u16)__Value) & BIT_LEN_MASK_16(__BitLen)) << (__BitOffset) ) \ ++ ); ++ ++#define BIT_LEN_MASK_8(__BitLen) \ ++ (0xFF >> (8 - (__BitLen))) ++ ++#define BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) \ ++ (BIT_LEN_MASK_8(__BitLen) << (__BitOffset)) ++ ++#define LE_P1BYTE_TO_HOST_1BYTE(__pStart) \ ++ (EF1Byte(*((u8 *)(__pStart)))) ++ ++#define LE_BITS_TO_1BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ ( LE_P1BYTE_TO_HOST_1BYTE(__pStart) >> (__BitOffset) ) \ ++ & \ ++ BIT_LEN_MASK_8(__BitLen) \ ++ ) ++ ++#define LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \ ++ ( \ ++ LE_P1BYTE_TO_HOST_1BYTE(__pStart) \ ++ & \ ++ ( ~BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) ) \ ++ ) ++ ++#define SET_BITS_TO_LE_1BYTE(__pStart, __BitOffset, __BitLen, __Value) \ ++ *((u8 *)(__pStart)) = \ ++ EF1Byte( \ ++ LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \ ++ | \ ++ ( (((u8)__Value) & BIT_LEN_MASK_8(__BitLen)) << (__BitOffset) ) \ ++ ); ++ ++// Get the N-bytes aligment offset from the current length ++#define N_BYTE_ALIGMENT(__Value, __Aligment) ((__Aligment == 1) ? (__Value) : (((__Value + __Aligment - 1) / __Aligment) * __Aligment)) ++ ++typedef unsigned char BOOLEAN,*PBOOLEAN; ++ ++#endif //__BASIC_TYPES_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/big_endian.h b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/big_endian.h +new file mode 100644 +index 000000000000..0cd3504fa43d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/big_endian.h +@@ -0,0 +1,87 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H ++#define _LINUX_BYTEORDER_BIG_ENDIAN_H ++ ++#ifndef __BIG_ENDIAN ++#define __BIG_ENDIAN 4321 ++#endif ++#ifndef __BIG_ENDIAN_BITFIELD ++#define __BIG_ENDIAN_BITFIELD ++#endif ++ ++#include ++ ++#define __constant_htonl(x) ((__u32)(x)) ++#define __constant_ntohl(x) ((__u32)(x)) ++#define __constant_htons(x) ((__u16)(x)) ++#define __constant_ntohs(x) ((__u16)(x)) ++#define __constant_cpu_to_le64(x) ___constant_swab64((x)) ++#define __constant_le64_to_cpu(x) ___constant_swab64((x)) ++#define __constant_cpu_to_le32(x) ___constant_swab32((x)) ++#define __constant_le32_to_cpu(x) ___constant_swab32((x)) ++#define __constant_cpu_to_le16(x) ___constant_swab16((x)) ++#define __constant_le16_to_cpu(x) ___constant_swab16((x)) ++#define __constant_cpu_to_be64(x) ((__u64)(x)) ++#define __constant_be64_to_cpu(x) ((__u64)(x)) ++#define __constant_cpu_to_be32(x) ((__u32)(x)) ++#define __constant_be32_to_cpu(x) ((__u32)(x)) ++#define __constant_cpu_to_be16(x) ((__u16)(x)) ++#define __constant_be16_to_cpu(x) ((__u16)(x)) ++#define __cpu_to_le64(x) __swab64((x)) ++#define __le64_to_cpu(x) __swab64((x)) ++#define __cpu_to_le32(x) __swab32((x)) ++#define __le32_to_cpu(x) __swab32((x)) ++#define __cpu_to_le16(x) __swab16((x)) ++#define __le16_to_cpu(x) __swab16((x)) ++#define __cpu_to_be64(x) ((__u64)(x)) ++#define __be64_to_cpu(x) ((__u64)(x)) ++#define __cpu_to_be32(x) ((__u32)(x)) ++#define __be32_to_cpu(x) ((__u32)(x)) ++#define __cpu_to_be16(x) ((__u16)(x)) ++#define __be16_to_cpu(x) ((__u16)(x)) ++#define __cpu_to_le64p(x) __swab64p((x)) ++#define __le64_to_cpup(x) __swab64p((x)) ++#define __cpu_to_le32p(x) __swab32p((x)) ++#define __le32_to_cpup(x) __swab32p((x)) ++#define __cpu_to_le16p(x) __swab16p((x)) ++#define __le16_to_cpup(x) __swab16p((x)) ++#define __cpu_to_be64p(x) (*(__u64*)(x)) ++#define __be64_to_cpup(x) (*(__u64*)(x)) ++#define __cpu_to_be32p(x) (*(__u32*)(x)) ++#define __be32_to_cpup(x) (*(__u32*)(x)) ++#define __cpu_to_be16p(x) (*(__u16*)(x)) ++#define __be16_to_cpup(x) (*(__u16*)(x)) ++#define __cpu_to_le64s(x) __swab64s((x)) ++#define __le64_to_cpus(x) __swab64s((x)) ++#define __cpu_to_le32s(x) __swab32s((x)) ++#define __le32_to_cpus(x) __swab32s((x)) ++#define __cpu_to_le16s(x) __swab16s((x)) ++#define __le16_to_cpus(x) __swab16s((x)) ++#define __cpu_to_be64s(x) do {} while (0) ++#define __be64_to_cpus(x) do {} while (0) ++#define __cpu_to_be32s(x) do {} while (0) ++#define __be32_to_cpus(x) do {} while (0) ++#define __cpu_to_be16s(x) do {} while (0) ++#define __be16_to_cpus(x) do {} while (0) ++ ++#include ++ ++#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/generic.h b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/generic.h +new file mode 100644 +index 000000000000..11676a635069 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/generic.h +@@ -0,0 +1,212 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_BYTEORDER_GENERIC_H ++#define _LINUX_BYTEORDER_GENERIC_H ++ ++/* ++ * linux/byteorder_generic.h ++ * Generic Byte-reordering support ++ * ++ * Francois-Rene Rideau 19970707 ++ * gathered all the good ideas from all asm-foo/byteorder.h into one file, ++ * cleaned them up. ++ * I hope it is compliant with non-GCC compilers. ++ * I decided to put __BYTEORDER_HAS_U64__ in byteorder.h, ++ * because I wasn't sure it would be ok to put it in types.h ++ * Upgraded it to 2.1.43 ++ * Francois-Rene Rideau 19971012 ++ * Upgraded it to 2.1.57 ++ * to please Linus T., replaced huge #ifdef's between little/big endian ++ * by nestedly #include'd files. ++ * Francois-Rene Rideau 19971205 ++ * Made it to 2.1.71; now a facelift: ++ * Put files under include/linux/byteorder/ ++ * Split swab from generic support. ++ * ++ * TODO: ++ * = Regular kernel maintainers could also replace all these manual ++ * byteswap macros that remain, disseminated among drivers, ++ * after some grep or the sources... ++ * = Linus might want to rename all these macros and files to fit his taste, ++ * to fit his personal naming scheme. ++ * = it seems that a few drivers would also appreciate ++ * nybble swapping support... ++ * = every architecture could add their byteswap macro in asm/byteorder.h ++ * see how some architectures already do (i386, alpha, ppc, etc) ++ * = cpu_to_beXX and beXX_to_cpu might some day need to be well ++ * distinguished throughout the kernel. This is not the case currently, ++ * since little endian, big endian, and pdp endian machines needn't it. ++ * But this might be the case for, say, a port of Linux to 20/21 bit ++ * architectures (and F21 Linux addict around?). ++ */ ++ ++/* ++ * The following macros are to be defined by : ++ * ++ * Conversion of long and short int between network and host format ++ * ntohl(__u32 x) ++ * ntohs(__u16 x) ++ * htonl(__u32 x) ++ * htons(__u16 x) ++ * It seems that some programs (which? where? or perhaps a standard? POSIX?) ++ * might like the above to be functions, not macros (why?). ++ * if that's true, then detect them, and take measures. ++ * Anyway, the measure is: define only ___ntohl as a macro instead, ++ * and in a separate file, have ++ * unsigned long inline ntohl(x){return ___ntohl(x);} ++ * ++ * The same for constant arguments ++ * __constant_ntohl(__u32 x) ++ * __constant_ntohs(__u16 x) ++ * __constant_htonl(__u32 x) ++ * __constant_htons(__u16 x) ++ * ++ * Conversion of XX-bit integers (16- 32- or 64-) ++ * between native CPU format and little/big endian format ++ * 64-bit stuff only defined for proper architectures ++ * cpu_to_[bl]eXX(__uXX x) ++ * [bl]eXX_to_cpu(__uXX x) ++ * ++ * The same, but takes a pointer to the value to convert ++ * cpu_to_[bl]eXXp(__uXX x) ++ * [bl]eXX_to_cpup(__uXX x) ++ * ++ * The same, but change in situ ++ * cpu_to_[bl]eXXs(__uXX x) ++ * [bl]eXX_to_cpus(__uXX x) ++ * ++ * See asm-foo/byteorder.h for examples of how to provide ++ * architecture-optimized versions ++ * ++ */ ++ ++ ++#if defined(PLATFORM_LINUX) || defined(PLATFORM_WINDOWS) || defined(PLATFORM_MPIXEL) || defined(PLATFORM_FREEBSD) ++/* ++ * inside the kernel, we can use nicknames; ++ * outside of it, we must avoid POSIX namespace pollution... ++ */ ++#define cpu_to_le64 __cpu_to_le64 ++#define le64_to_cpu __le64_to_cpu ++#define cpu_to_le32 __cpu_to_le32 ++#define le32_to_cpu __le32_to_cpu ++#define cpu_to_le16 __cpu_to_le16 ++#define le16_to_cpu __le16_to_cpu ++#define cpu_to_be64 __cpu_to_be64 ++#define be64_to_cpu __be64_to_cpu ++#define cpu_to_be32 __cpu_to_be32 ++#define be32_to_cpu __be32_to_cpu ++#define cpu_to_be16 __cpu_to_be16 ++#define be16_to_cpu __be16_to_cpu ++#define cpu_to_le64p __cpu_to_le64p ++#define le64_to_cpup __le64_to_cpup ++#define cpu_to_le32p __cpu_to_le32p ++#define le32_to_cpup __le32_to_cpup ++#define cpu_to_le16p __cpu_to_le16p ++#define le16_to_cpup __le16_to_cpup ++#define cpu_to_be64p __cpu_to_be64p ++#define be64_to_cpup __be64_to_cpup ++#define cpu_to_be32p __cpu_to_be32p ++#define be32_to_cpup __be32_to_cpup ++#define cpu_to_be16p __cpu_to_be16p ++#define be16_to_cpup __be16_to_cpup ++#define cpu_to_le64s __cpu_to_le64s ++#define le64_to_cpus __le64_to_cpus ++#define cpu_to_le32s __cpu_to_le32s ++#define le32_to_cpus __le32_to_cpus ++#define cpu_to_le16s __cpu_to_le16s ++#define le16_to_cpus __le16_to_cpus ++#define cpu_to_be64s __cpu_to_be64s ++#define be64_to_cpus __be64_to_cpus ++#define cpu_to_be32s __cpu_to_be32s ++#define be32_to_cpus __be32_to_cpus ++#define cpu_to_be16s __cpu_to_be16s ++#define be16_to_cpus __be16_to_cpus ++#endif ++ ++ ++/* ++ * Handle ntohl and suches. These have various compatibility ++ * issues - like we want to give the prototype even though we ++ * also have a macro for them in case some strange program ++ * wants to take the address of the thing or something.. ++ * ++ * Note that these used to return a "long" in libc5, even though ++ * long is often 64-bit these days.. Thus the casts. ++ * ++ * They have to be macros in order to do the constant folding ++ * correctly - if the argument passed into a inline function ++ * it is no longer constant according to gcc.. ++ */ ++ ++#undef ntohl ++#undef ntohs ++#undef htonl ++#undef htons ++ ++/* ++ * Do the prototypes. Somebody might want to take the ++ * address or some such sick thing.. ++ */ ++#if defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2) ++extern __u32 ntohl(__u32); ++extern __u32 htonl(__u32); ++#else //defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2) ++#ifndef PLATFORM_FREEBSD ++extern unsigned long int ntohl(unsigned long int); ++extern unsigned long int htonl(unsigned long int); ++#endif ++#endif ++#ifndef PLATFORM_FREEBSD ++extern unsigned short int ntohs(unsigned short int); ++extern unsigned short int htons(unsigned short int); ++#endif ++ ++#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__) || defined(PLATFORM_MPIXEL) ++ ++#define ___htonl(x) __cpu_to_be32(x) ++#define ___htons(x) __cpu_to_be16(x) ++#define ___ntohl(x) __be32_to_cpu(x) ++#define ___ntohs(x) __be16_to_cpu(x) ++ ++#if defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2) ++#define htonl(x) ___htonl(x) ++#define ntohl(x) ___ntohl(x) ++#else ++#define htonl(x) ((unsigned long)___htonl(x)) ++#define ntohl(x) ((unsigned long)___ntohl(x)) ++#endif ++#define htons(x) ___htons(x) ++#define ntohs(x) ___ntohs(x) ++ ++#endif /* OPTIMIZE */ ++ ++ ++#if defined (PLATFORM_WINDOWS) ++ ++#define htonl(x) __cpu_to_be32(x) ++#define ntohl(x) __be32_to_cpu(x) ++#define htons(x) __cpu_to_be16(x) ++#define ntohs(x) __be16_to_cpu(x) ++ ++ ++#endif ++ ++#endif /* _LINUX_BYTEORDER_GENERIC_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/little_endian.h b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/little_endian.h +new file mode 100644 +index 000000000000..9f77fb4b56e2 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/little_endian.h +@@ -0,0 +1,89 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H ++#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H ++ ++#ifndef __LITTLE_ENDIAN ++#define __LITTLE_ENDIAN 1234 ++#endif ++#ifndef __LITTLE_ENDIAN_BITFIELD ++#define __LITTLE_ENDIAN_BITFIELD ++#endif ++ ++#include ++ ++#ifndef __constant_htonl ++#define __constant_htonl(x) ___constant_swab32((x)) ++#define __constant_ntohl(x) ___constant_swab32((x)) ++#define __constant_htons(x) ___constant_swab16((x)) ++#define __constant_ntohs(x) ___constant_swab16((x)) ++#define __constant_cpu_to_le64(x) ((__u64)(x)) ++#define __constant_le64_to_cpu(x) ((__u64)(x)) ++#define __constant_cpu_to_le32(x) ((__u32)(x)) ++#define __constant_le32_to_cpu(x) ((__u32)(x)) ++#define __constant_cpu_to_le16(x) ((__u16)(x)) ++#define __constant_le16_to_cpu(x) ((__u16)(x)) ++#define __constant_cpu_to_be64(x) ___constant_swab64((x)) ++#define __constant_be64_to_cpu(x) ___constant_swab64((x)) ++#define __constant_cpu_to_be32(x) ___constant_swab32((x)) ++#define __constant_be32_to_cpu(x) ___constant_swab32((x)) ++#define __constant_cpu_to_be16(x) ___constant_swab16((x)) ++#define __constant_be16_to_cpu(x) ___constant_swab16((x)) ++#define __cpu_to_le64(x) ((__u64)(x)) ++#define __le64_to_cpu(x) ((__u64)(x)) ++#define __cpu_to_le32(x) ((__u32)(x)) ++#define __le32_to_cpu(x) ((__u32)(x)) ++#define __cpu_to_le16(x) ((__u16)(x)) ++#define __le16_to_cpu(x) ((__u16)(x)) ++#define __cpu_to_be64(x) __swab64((x)) ++#define __be64_to_cpu(x) __swab64((x)) ++#define __cpu_to_be32(x) __swab32((x)) ++#define __be32_to_cpu(x) __swab32((x)) ++#define __cpu_to_be16(x) __swab16((x)) ++#define __be16_to_cpu(x) __swab16((x)) ++#define __cpu_to_le64p(x) (*(__u64*)(x)) ++#define __le64_to_cpup(x) (*(__u64*)(x)) ++#define __cpu_to_le32p(x) (*(__u32*)(x)) ++#define __le32_to_cpup(x) (*(__u32*)(x)) ++#define __cpu_to_le16p(x) (*(__u16*)(x)) ++#define __le16_to_cpup(x) (*(__u16*)(x)) ++#define __cpu_to_be64p(x) __swab64p((x)) ++#define __be64_to_cpup(x) __swab64p((x)) ++#define __cpu_to_be32p(x) __swab32p((x)) ++#define __be32_to_cpup(x) __swab32p((x)) ++#define __cpu_to_be16p(x) __swab16p((x)) ++#define __be16_to_cpup(x) __swab16p((x)) ++#define __cpu_to_le64s(x) do {} while (0) ++#define __le64_to_cpus(x) do {} while (0) ++#define __cpu_to_le32s(x) do {} while (0) ++#define __le32_to_cpus(x) do {} while (0) ++#define __cpu_to_le16s(x) do {} while (0) ++#define __le16_to_cpus(x) do {} while (0) ++#define __cpu_to_be64s(x) __swab64s((x)) ++#define __be64_to_cpus(x) __swab64s((x)) ++#define __cpu_to_be32s(x) __swab32s((x)) ++#define __be32_to_cpus(x) __swab32s((x)) ++#define __cpu_to_be16s(x) __swab16s((x)) ++#define __be16_to_cpus(x) __swab16s((x)) ++#endif // __constant_htonl ++ ++#include ++ ++#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swab.h b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swab.h +new file mode 100644 +index 000000000000..1cf2821fd6e7 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swab.h +@@ -0,0 +1,140 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_BYTEORDER_SWAB_H ++#define _LINUX_BYTEORDER_SWAB_H ++ ++#if !defined(CONFIG_PLATFORM_MSTAR) ++#ifndef __u16 ++typedef unsigned short __u16; ++#endif ++ ++#ifndef __u32 ++typedef unsigned int __u32; ++#endif ++ ++#ifndef __u8 ++typedef unsigned char __u8; ++#endif ++ ++#ifndef __u64 ++typedef unsigned long long __u64; ++#endif ++ ++ ++__inline static __u16 ___swab16(__u16 x) ++{ ++ __u16 __x = x; ++ return ++ ((__u16)( ++ (((__u16)(__x) & (__u16)0x00ffU) << 8) | ++ (((__u16)(__x) & (__u16)0xff00U) >> 8) )); ++ ++} ++ ++__inline static __u32 ___swab32(__u32 x) ++{ ++ __u32 __x = (x); ++ return ((__u32)( ++ (((__u32)(__x) & (__u32)0x000000ffUL) << 24) | ++ (((__u32)(__x) & (__u32)0x0000ff00UL) << 8) | ++ (((__u32)(__x) & (__u32)0x00ff0000UL) >> 8) | ++ (((__u32)(__x) & (__u32)0xff000000UL) >> 24) )); ++} ++ ++__inline static __u64 ___swab64(__u64 x) ++{ ++ __u64 __x = (x); ++ ++ return ++ ((__u64)( \ ++ (__u64)(((__u64)(__x) & (__u64)0x00000000000000ffULL) << 56) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x000000000000ff00ULL) << 40) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x0000000000ff0000ULL) << 24) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x00000000ff000000ULL) << 8) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x000000ff00000000ULL) >> 8) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x0000ff0000000000ULL) >> 24) | \ ++ (__u64)(((__u64)(__x) & (__u64)0x00ff000000000000ULL) >> 40) | \ ++ (__u64)(((__u64)(__x) & (__u64)0xff00000000000000ULL) >> 56) )); \ ++} ++#endif // CONFIG_PLATFORM_MSTAR ++ ++#ifndef __arch__swab16 ++__inline static __u16 __arch__swab16(__u16 x) ++{ ++ return ___swab16(x); ++} ++ ++#endif ++ ++#ifndef __arch__swab32 ++__inline static __u32 __arch__swab32(__u32 x) ++{ ++ __u32 __tmp = (x) ; ++ return ___swab32(__tmp); ++} ++#endif ++ ++#ifndef __arch__swab64 ++ ++__inline static __u64 __arch__swab64(__u64 x) ++{ ++ __u64 __tmp = (x) ; ++ return ___swab64(__tmp); ++} ++ ++ ++#endif ++ ++#ifndef __swab16 ++#define __swab16(x) __fswab16(x) ++#define __swab32(x) __fswab32(x) ++#define __swab64(x) __fswab64(x) ++#endif // __swab16 ++ ++#ifdef PLATFORM_FREEBSD ++__inline static __u16 __fswab16(__u16 x) ++#else ++__inline static const __u16 __fswab16(__u16 x) ++#endif //PLATFORM_FREEBSD ++{ ++ return __arch__swab16(x); ++} ++#ifdef PLATFORM_FREEBSD ++__inline static __u32 __fswab32(__u32 x) ++#else ++__inline static const __u32 __fswab32(__u32 x) ++#endif //PLATFORM_FREEBSD ++{ ++ return __arch__swab32(x); ++} ++ ++#if defined(PLATFORM_LINUX) || defined(PLATFORM_WINDOWS) ++#define swab16 __swab16 ++#define swab32 __swab32 ++#define swab64 __swab64 ++#define swab16p __swab16p ++#define swab32p __swab32p ++#define swab64p __swab64p ++#define swab16s __swab16s ++#define swab32s __swab32s ++#define swab64s __swab64s ++#endif ++ ++#endif /* _LINUX_BYTEORDER_SWAB_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swabb.h b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swabb.h +new file mode 100644 +index 000000000000..cf0fad67ac1c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/byteorder/swabb.h +@@ -0,0 +1,156 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_BYTEORDER_SWABB_H ++#define _LINUX_BYTEORDER_SWABB_H ++ ++/* ++ * linux/byteorder/swabb.h ++ * SWAp Bytes Bizarrely ++ * swaHHXX[ps]?(foo) ++ * ++ * Support for obNUXIous pdp-endian and other bizarre architectures. ++ * Will Linux ever run on such ancient beasts? if not, this file ++ * will be but a programming pearl. Still, it's a reminder that we ++ * shouldn't be making too many assumptions when trying to be portable. ++ * ++ */ ++ ++/* ++ * Meaning of the names I chose (vaxlinux people feel free to correct them): ++ * swahw32 swap 16-bit half-words in a 32-bit word ++ * swahb32 swap 8-bit halves of each 16-bit half-word in a 32-bit word ++ * ++ * No 64-bit support yet. I don't know NUXI conventions for long longs. ++ * I guarantee it will be a mess when it's there, though :-> ++ * It will be even worse if there are conflicting 64-bit conventions. ++ * Hopefully, no one ever used 64-bit objects on NUXI machines. ++ * ++ */ ++ ++#define ___swahw32(x) \ ++({ \ ++ __u32 __x = (x); \ ++ ((__u32)( \ ++ (((__u32)(__x) & (__u32)0x0000ffffUL) << 16) | \ ++ (((__u32)(__x) & (__u32)0xffff0000UL) >> 16) )); \ ++}) ++#define ___swahb32(x) \ ++({ \ ++ __u32 __x = (x); \ ++ ((__u32)( \ ++ (((__u32)(__x) & (__u32)0x00ff00ffUL) << 8) | \ ++ (((__u32)(__x) & (__u32)0xff00ff00UL) >> 8) )); \ ++}) ++ ++#define ___constant_swahw32(x) \ ++ ((__u32)( \ ++ (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \ ++ (((__u32)(x) & (__u32)0xffff0000UL) >> 16) )) ++#define ___constant_swahb32(x) \ ++ ((__u32)( \ ++ (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \ ++ (((__u32)(x) & (__u32)0xff00ff00UL) >> 8) )) ++ ++/* ++ * provide defaults when no architecture-specific optimization is detected ++ */ ++#ifndef __arch__swahw32 ++# define __arch__swahw32(x) ___swahw32(x) ++#endif ++#ifndef __arch__swahb32 ++# define __arch__swahb32(x) ___swahb32(x) ++#endif ++ ++#ifndef __arch__swahw32p ++# define __arch__swahw32p(x) __swahw32(*(x)) ++#endif ++#ifndef __arch__swahb32p ++# define __arch__swahb32p(x) __swahb32(*(x)) ++#endif ++ ++#ifndef __arch__swahw32s ++# define __arch__swahw32s(x) do { *(x) = __swahw32p((x)); } while (0) ++#endif ++#ifndef __arch__swahb32s ++# define __arch__swahb32s(x) do { *(x) = __swahb32p((x)); } while (0) ++#endif ++ ++ ++/* ++ * Allow constant folding ++ */ ++#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__) ++# define __swahw32(x) \ ++(__builtin_constant_p((__u32)(x)) ? \ ++ ___swahw32((x)) : \ ++ __fswahw32((x))) ++# define __swahb32(x) \ ++(__builtin_constant_p((__u32)(x)) ? \ ++ ___swahb32((x)) : \ ++ __fswahb32((x))) ++#else ++# define __swahw32(x) __fswahw32(x) ++# define __swahb32(x) __fswahb32(x) ++#endif /* OPTIMIZE */ ++ ++ ++__inline static__ __const__ __u32 __fswahw32(__u32 x) ++{ ++ return __arch__swahw32(x); ++} ++__inline static__ __u32 __swahw32p(__u32 *x) ++{ ++ return __arch__swahw32p(x); ++} ++__inline static__ void __swahw32s(__u32 *addr) ++{ ++ __arch__swahw32s(addr); ++} ++ ++ ++__inline static__ __const__ __u32 __fswahb32(__u32 x) ++{ ++ return __arch__swahb32(x); ++} ++__inline static__ __u32 __swahb32p(__u32 *x) ++{ ++ return __arch__swahb32p(x); ++} ++__inline static__ void __swahb32s(__u32 *addr) ++{ ++ __arch__swahb32s(addr); ++} ++ ++#ifdef __BYTEORDER_HAS_U64__ ++/* ++ * Not supported yet ++ */ ++#endif /* __BYTEORDER_HAS_U64__ */ ++ ++#if defined(PLATFORM_LINUX) ++#define swahw32 __swahw32 ++#define swahb32 __swahb32 ++#define swahw32p __swahw32p ++#define swahb32p __swahb32p ++#define swahw32s __swahw32s ++#define swahb32s __swahb32s ++#endif ++ ++#endif /* _LINUX_BYTEORDER_SWABB_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/circ_buf.h b/drivers/net/wireless/realtek/rtl8192cu/include/circ_buf.h +new file mode 100644 +index 000000000000..236fbe60105b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/circ_buf.h +@@ -0,0 +1,27 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __CIRC_BUF_H_ ++#define __CIRC_BUF_H_ 1 ++ ++#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1)) ++ ++#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size)) ++ ++#endif //_CIRC_BUF_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/cmd_osdep.h b/drivers/net/wireless/realtek/rtl8192cu/include/cmd_osdep.h +new file mode 100644 +index 000000000000..c4903f48144b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/cmd_osdep.h +@@ -0,0 +1,35 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __CMD_OSDEP_H_ ++#define __CMD_OSDEP_H_ ++ ++ ++#include ++#include ++#include ++ ++extern sint _rtw_init_cmd_priv (struct cmd_priv *pcmdpriv); ++extern sint _rtw_init_evt_priv(struct evt_priv *pevtpriv); ++extern void _rtw_free_evt_priv (struct evt_priv *pevtpriv); ++extern void _rtw_free_cmd_priv (struct cmd_priv *pcmdpriv); ++extern sint _rtw_enqueue_cmd(_queue *queue, struct cmd_obj *obj); ++extern struct cmd_obj *_rtw_dequeue_cmd(_queue *queue); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_conf.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_conf.h +new file mode 100644 +index 000000000000..370a121881e9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_conf.h +@@ -0,0 +1,77 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __DRV_CONF_H__ ++#define __DRV_CONF_H__ ++#include "autoconf.h" ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++//Older Android kernel doesn't has CONFIG_ANDROID defined, ++//add this to force CONFIG_ANDROID defined ++#ifdef CONFIG_PLATFORM_ANDROID ++#define CONFIG_ANDROID ++#endif ++ ++#ifdef CONFIG_ANDROID ++//Some Android build will restart the UI while non-printable ascii is passed ++//between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID ++//for Android here. If you are sure there is no risk on your system about this, ++//mask this macro define to support non-printable ascii ssid. ++//#define CONFIG_VALIDATE_SSID ++ ++//Android expect dbm as the rx signal strength unit ++#define CONFIG_SIGNAL_DISPLAY_DBM ++#endif ++ ++#if defined(CONFIG_HAS_EARLYSUSPEND) && defined (CONFIG_RESUME_IN_WORKQUEUE) ++ #warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically" ++ #undef CONFIG_RESUME_IN_WORKQUEUE ++#endif ++ ++#if defined(CONFIG_ANDROID_POWER) && defined (CONFIG_RESUME_IN_WORKQUEUE) ++ #warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically" ++ #undef CONFIG_RESUME_IN_WORKQUEUE ++#endif ++ ++#ifdef CONFIG_RESUME_IN_WORKQUEUE //this can be removed, because there is no case for this... ++ #if !defined( CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER) ++ #error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..." ++ #error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..." ++ #endif ++#endif ++ ++//About USB VENDOR REQ ++#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX) ++ #warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically" ++ #define CONFIG_USB_VENDOR_REQ_MUTEX ++#endif ++#if defined(CONFIG_VENDOR_REQ_RETRY) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX) ++ #warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically" ++ #define CONFIG_USB_VENDOR_REQ_MUTEX ++#endif ++ ++ ++//#include ++ ++#endif // __DRV_CONF_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_types.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types.h +new file mode 100644 +index 000000000000..46ab66350985 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types.h +@@ -0,0 +1,661 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/*------------------------------------------------------------------------------- ++ ++ For type defines and data structure defines ++ ++--------------------------------------------------------------------------------*/ ++ ++ ++#ifndef __DRV_TYPES_H__ ++#define __DRV_TYPES_H__ ++ ++#include ++#include ++#include ++ ++ ++#ifdef PLATFORM_OS_XP ++#include ++#endif ++ ++#ifdef PLATFORM_OS_CE ++#include ++#endif ++ ++#ifdef PLATFORM_LINUX ++#include ++#endif ++ ++enum _NIC_VERSION { ++ ++ RTL8711_NIC, ++ RTL8712_NIC, ++ RTL8713_NIC, ++ RTL8716_NIC ++ ++}; ++ ++enum{ ++ UP_LINK, ++ DOWN_LINK, ++}; ++typedef struct _ADAPTER _adapter, ADAPTER,*PADAPTER; ++ ++#ifdef CONFIG_80211N_HT ++#include ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_DRVEXT_MODULE ++#include ++#endif ++ ++#ifdef CONFIG_MP_INCLUDED ++#include ++#endif ++ ++#ifdef CONFIG_BR_EXT ++#include ++#endif // CONFIG_BR_EXT ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ #include "ioctl_cfg80211.h" ++#endif //CONFIG_IOCTL_CFG80211 ++ ++#define SPEC_DEV_ID_NONE BIT(0) ++#define SPEC_DEV_ID_DISABLE_HT BIT(1) ++#define SPEC_DEV_ID_ENABLE_PS BIT(2) ++#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3) ++#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4) ++#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5) ++ ++struct specific_device_id{ ++ ++ u32 flags; ++ ++ u16 idVendor; ++ u16 idProduct; ++ ++}; ++ ++struct registry_priv ++{ ++ u8 chip_version; ++ u8 rfintfs; ++ u8 lbkmode; ++ u8 hci; ++ NDIS_802_11_SSID ssid; ++ u8 network_mode; //infra, ad-hoc, auto ++ u8 channel;//ad-hoc support requirement ++ u8 wireless_mode;//A, B, G, auto ++ u8 scan_mode;//active, passive ++ u8 radio_enable; ++ u8 preamble;//long, short, auto ++ u8 vrtl_carrier_sense;//Enable, Disable, Auto ++ u8 vcs_type;//RTS/CTS, CTS-to-self ++ u16 rts_thresh; ++ u16 frag_thresh; ++ u8 adhoc_tx_pwr; ++ u8 soft_ap; ++ u8 power_mgnt; ++ u8 ips_mode; ++ u8 smart_ps; ++ u8 long_retry_lmt; ++ u8 short_retry_lmt; ++ u16 busy_thresh; ++ u8 ack_policy; ++ u8 mp_mode; ++ u8 software_encrypt; ++ u8 software_decrypt; ++ ++ u8 acm_method; ++ //UAPSD ++ u8 wmm_enable; ++ u8 uapsd_enable; ++ u8 uapsd_max_sp; ++ u8 uapsd_acbk_en; ++ u8 uapsd_acbe_en; ++ u8 uapsd_acvi_en; ++ u8 uapsd_acvo_en; ++ ++ WLAN_BSSID_EX dev_network; ++ ++#ifdef CONFIG_80211N_HT ++ u8 ht_enable; ++ u8 cbw40_enable; ++ u8 ampdu_enable;//for tx ++ u8 rx_stbc; ++ u8 ampdu_amsdu;//A-MPDU Supports A-MSDU is permitted ++#endif ++ u8 lowrate_two_xmit; ++ ++ u8 rf_config ; ++ u8 low_power ; ++ ++ u8 wifi_spec;// !turbo_mode ++ ++ u8 channel_plan; ++#ifdef CONFIG_BT_COEXIST ++ u8 bt_iso; ++ u8 bt_sco; ++ u8 bt_ampdu; ++#endif ++ BOOLEAN bAcceptAddbaReq; ++ ++ u8 antdiv_cfg; ++ ++ u8 usbss_enable;//0:disable,1:enable ++ u8 hwpdn_mode;//0:disable,1:enable,2:decide by EFUSE config ++ u8 hwpwrp_detect;//0:disable,1:enable ++ ++ u8 hw_wps_pbc;//0:disable,1:enable ++ ++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++ char adaptor_info_caching_file_path[PATH_LENGTH_MAX]; ++#endif ++ ++#ifdef CONFIG_LAYER2_ROAMING ++ u8 max_roaming_times; // the max number driver will try to roaming ++#endif ++ ++#ifdef CONFIG_IOL ++ bool force_iol; //enable iol without other concern ++#endif ++ u8 special_rf_path; //0: 2T2R ,1: only turn on path A 1T1R, 2: only turn on path B 1T1R ++ u8 mac_phy_mode; //0:by efuse, 1:smsp, 2:dmdp, 3:dmsp. ++ ++#ifdef CONFIG_80211D ++ u8 enable80211d; ++#endif ++ ++ u8 ifname[16]; ++ u8 if2name[16]; ++ ++ u8 notch_filter; ++ ++#ifdef CONFIG_MULTI_VIR_IFACES ++ u8 ext_iface_num;//primary/secondary iface is excluded ++#endif ++}; ++ ++ ++//For registry parameters ++#define RGTRY_OFT(field) ((ULONG)FIELD_OFFSET(struct registry_priv,field)) ++#define RGTRY_SZ(field) sizeof(((struct registry_priv*) 0)->field) ++#define BSSID_OFT(field) ((ULONG)FIELD_OFFSET(WLAN_BSSID_EX,field)) ++#define BSSID_SZ(field) sizeof(((PWLAN_BSSID_EX) 0)->field) ++ ++#define MAX_CONTINUAL_URB_ERR 4 ++ ++#ifdef CONFIG_SDIO_HCI ++#include ++#define INTF_DATA SDIO_DATA ++#endif ++ ++#define GET_PRIMARY_ADAPTER(padapter) (((_adapter *)padapter)->dvobj->if1) ++ ++#define GET_IFACE_NUMS(padapter) (((_adapter *)padapter)->dvobj->iface_nums) ++#define GET_ADAPTER(padapter, iface_id) (((_adapter *)padapter)->dvobj->padapters[iface_id]) ++ ++enum _IFACE_ID { ++ IFACE_ID0, //maping to PRIMARY_ADAPTER ++ IFACE_ID1, //maping to SECONDARY_ADAPTER ++ IFACE_ID2, ++ IFACE_ID3, ++ IFACE_ID_MAX, ++}; ++ ++struct dvobj_priv ++{ ++ _adapter *if1; //PRIMARY_ADAPTER ++ _adapter *if2; //SECONDARY_ADAPTER ++ ++ s32 processing_dev_remove; ++ ++ //for local/global synchronization ++ _mutex hw_init_mutex; ++ _mutex h2c_fwcmd_mutex; ++ _mutex setch_mutex; ++ _mutex setbw_mutex; ++ ++ unsigned char oper_channel; //saved channel info when call set_channel_bw ++ unsigned char oper_bwmode; ++ unsigned char oper_ch_offset;//PRIME_CHNL_OFFSET ++ u32 on_oper_ch_time; ++ ++ //extend to support mulitu interface ++ //padapters[IFACE_ID0] == if1 ++ //padapters[IFACE_ID1] == if2 ++ _adapter *padapters[IFACE_ID_MAX]; ++ u8 iface_nums; // total number of ifaces used runtime ++ ++ //For 92D, DMDP have 2 interface. ++ u8 InterfaceNumber; ++ u8 NumInterfaces; ++ u8 DualMacMode; ++ u8 irq_alloc; ++ ++/*-------- below is for SDIO INTERFACE --------*/ ++ ++#ifdef INTF_DATA ++ INTF_DATA intf_data; ++#endif ++ ++/*-------- below is for USB INTERFACE --------*/ ++ ++#ifdef CONFIG_USB_HCI ++ ++ u8 nr_endpoint; ++ u8 ishighspeed; ++ u8 RtNumInPipes; ++ u8 RtNumOutPipes; ++ int ep_num[5]; //endpoint number ++ ++ int RegUsbSS; ++ ++ _sema usb_suspend_sema; ++ ++#ifdef CONFIG_USB_VENDOR_REQ_MUTEX ++ _mutex usb_vendor_req_mutex; ++#endif ++ ++#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC ++ u8 * usb_alloc_vendor_req_buf; ++ u8 * usb_vendor_req_buf; ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ //related device objects ++ PDEVICE_OBJECT pphysdevobj;//pPhysDevObj; ++ PDEVICE_OBJECT pfuncdevobj;//pFuncDevObj; ++ PDEVICE_OBJECT pnextdevobj;//pNextDevObj; ++ ++ u8 nextdevstacksz;//unsigned char NextDeviceStackSize; //= (CHAR)CEdevice->pUsbDevObj->StackSize + 1; ++ ++ //urb for control diescriptor request ++ ++#ifdef PLATFORM_OS_XP ++ struct _URB_CONTROL_DESCRIPTOR_REQUEST descriptor_urb; ++ PUSB_CONFIGURATION_DESCRIPTOR pconfig_descriptor;//UsbConfigurationDescriptor; ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ WCHAR active_path[MAX_ACTIVE_REG_PATH]; // adapter regpath ++ USB_EXTENSION usb_extension; ++ ++ _nic_hdl pipehdls_r8192c[0x10]; ++#endif ++ ++ u32 config_descriptor_len;//ULONG UsbConfigurationDescriptorLength; ++#endif//PLATFORM_WINDOWS ++ ++#ifdef PLATFORM_LINUX ++ struct usb_interface *pusbintf; ++ struct usb_device *pusbdev; ++#endif//PLATFORM_LINUX ++ ++#ifdef PLATFORM_FREEBSD ++ struct usb_interface *pusbintf; ++ struct usb_device *pusbdev; ++#endif//PLATFORM_FREEBSD ++ ATOMIC_T continual_urb_error; ++#endif//CONFIG_USB_HCI ++ ++/*-------- below is for PCIE INTERFACE --------*/ ++ ++#ifdef CONFIG_PCI_HCI ++ ++#ifdef PLATFORM_LINUX ++ struct pci_dev *ppcidev; ++ ++ //PCI MEM map ++ unsigned long pci_mem_end; /* shared mem end */ ++ unsigned long pci_mem_start; /* shared mem start */ ++ ++ //PCI IO map ++ unsigned long pci_base_addr; /* device I/O address */ ++ ++ //PciBridge ++ struct pci_priv pcipriv; ++ ++ u16 irqline; ++ u8 irq_enabled; ++ RT_ISR_CONTENT isr_content; ++ _lock irq_th_lock; ++ ++ //ASPM ++ u8 const_pci_aspm; ++ u8 const_amdpci_aspm; ++ u8 const_hwsw_rfoff_d3; ++ u8 const_support_pciaspm; ++ // pci-e bridge */ ++ u8 const_hostpci_aspm_setting; ++ // pci-e device */ ++ u8 const_devicepci_aspm_setting; ++ u8 b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00. ++ u8 b_support_backdoor; ++ u8 bdma64; ++#endif//PLATFORM_LINUX ++ ++#endif//CONFIG_PCI_HCI ++}; ++ ++#ifdef PLATFORM_LINUX ++static struct device *dvobj_to_dev(struct dvobj_priv *dvobj) ++{ ++ /* todo: get interface type from dvobj and the return the dev accordingly */ ++#ifdef RTW_DVOBJ_CHIP_HW_TYPE ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ return &dvobj->pusbintf->dev; ++#endif ++#ifdef CONFIG_SDIO_HCI ++ return &dvobj->intf_data.func->dev; ++#endif ++#ifdef CONFIG_PCI_HCI ++ return &dvobj->ppcidev->dev; ++#endif ++} ++#endif ++ ++ ++enum _IFACE_TYPE { ++ IFACE_PORT0, //mapping to port0 for C/D series chips ++ IFACE_PORT1, //mapping to port1 for C/D series chip ++ MAX_IFACE_PORT, ++}; ++ ++enum _ADAPTER_TYPE { ++ PRIMARY_ADAPTER, ++ SECONDARY_ADAPTER, ++ MAX_ADAPTER = 0xFF, ++}; ++ ++typedef enum _DRIVER_STATE{ ++ DRIVER_NORMAL = 0, ++ DRIVER_DISAPPEAR = 1, ++ DRIVER_REPLACE_DONGLE = 2, ++}DRIVER_STATE; ++ ++#ifdef CONFIG_INTEL_PROXIM ++struct proxim { ++ bool proxim_support; ++ bool proxim_on; ++ ++ void *proximity_priv; ++ int (*proxim_rx)(_adapter *padapter, ++ union recv_frame *precv_frame); ++ u8 (*proxim_get_var)(_adapter* padapter, u8 type); ++}; ++#endif //CONFIG_INTEL_PROXIM ++ ++#ifdef RTL8723A_SDIO_LOOPBACK ++typedef struct loopbackdata ++{ ++ _sema sema; ++ _thread_hdl_ lbkthread; ++ u8 bstop; ++ u32 cnt; ++ u16 size; ++ u16 txsize; ++ u8 txbuf[0x8000]; ++ u16 rxsize; ++ u8 rxbuf[0x8000]; ++ u8 msg[100]; ++ ++}LOOPBACKDATA, *PLOOPBACKDATA; ++#endif ++ ++struct _ADAPTER{ ++ int DriverState;// for disable driver using module, use dongle to replace module. ++ int pid[3];//process id from UI, 0:wps, 1:hostapd, 2:dhcpcd ++ int bDongle;//build-in module or external dongle ++ u16 chip_type; ++ u16 HardwareType; ++ u16 interface_type;//USB,SDIO,PCI ++ ++ struct dvobj_priv *dvobj; ++ struct mlme_priv mlmepriv; ++ struct mlme_ext_priv mlmeextpriv; ++ struct cmd_priv cmdpriv; ++ struct evt_priv evtpriv; ++ //struct io_queue *pio_queue; ++ struct io_priv iopriv; ++ struct xmit_priv xmitpriv; ++ struct recv_priv recvpriv; ++ struct sta_priv stapriv; ++ struct security_priv securitypriv; ++ _lock security_key_mutex; // add for CONFIG_IEEE80211W, none 11w also can use ++ struct registry_priv registrypriv; ++ struct pwrctrl_priv pwrctrlpriv; ++ struct eeprom_priv eeprompriv; ++ struct led_priv ledpriv; ++ ++#ifdef CONFIG_MP_INCLUDED ++ struct mp_priv mppriv; ++#endif ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ struct drvext_priv drvextpriv; ++#endif ++ ++#ifdef CONFIG_AP_MODE ++ struct hostapd_priv *phostapdpriv; ++#endif ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++#ifdef CONFIG_P2P ++ struct cfg80211_wifidirect_info cfg80211_wdinfo; ++#endif //CONFIG_P2P ++#endif //CONFIG_IOCTL_CFG80211 ++ u32 setband; ++#ifdef CONFIG_P2P ++ struct wifidirect_info wdinfo; ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_TDLS ++ struct tdls_info tdlsinfo; ++#endif //CONFIG_TDLS ++ ++#ifdef CONFIG_WFD ++ struct wifi_display_info wfd_info; ++#endif //CONFIG_WFD ++ ++ PVOID HalData; ++ u32 hal_data_sz; ++ struct hal_ops HalFunc; ++ ++#ifdef CONFIG_BT_COEXIST ++ //struct btcoexist_priv bt_coexist; ++#endif ++ s32 bDriverStopped; ++ s32 bSurpriseRemoved; ++ s32 bCardDisableWOHSM; ++ ++ u32 IsrContent; ++ u32 ImrContent; ++ ++ u8 EepromAddressSize; ++ u8 hw_init_completed; ++ u8 bDriverIsGoingToUnload; ++ u8 init_adpt_in_progress; ++ u8 bHaltInProgress; ++ ++ _thread_hdl_ cmdThread; ++ _thread_hdl_ evtThread; ++ _thread_hdl_ xmitThread; ++ _thread_hdl_ recvThread; ++ ++#ifndef PLATFORM_LINUX ++ NDIS_STATUS (*dvobj_init)(struct dvobj_priv *dvobj); ++ void (*dvobj_deinit)(struct dvobj_priv *dvobj); ++#endif ++ ++ void (*intf_start)(_adapter * adapter); ++ void (*intf_stop)(_adapter * adapter); ++ ++#ifdef PLATFORM_WINDOWS ++ _nic_hdl hndis_adapter;//hNdisAdapter(NDISMiniportAdapterHandle); ++ _nic_hdl hndis_config;//hNdisConfiguration; ++ NDIS_STRING fw_img; ++ ++ u32 NdisPacketFilter; ++ u8 MCList[MAX_MCAST_LIST_NUM][6]; ++ u32 MCAddrCount; ++#endif //end of PLATFORM_WINDOWS ++ ++ ++#ifdef PLATFORM_LINUX ++ _nic_hdl pnetdev; ++ ++ // used by rtw_rereg_nd_name related function ++ struct rereg_nd_name_data { ++ _nic_hdl old_pnetdev; ++ char old_ifname[IFNAMSIZ]; ++ u8 old_ips_mode; ++ u8 old_bRegUseLed; ++ } rereg_nd_name_priv; ++ ++ int bup; ++ struct net_device_stats stats; ++ struct iw_statistics iwstats; ++ struct proc_dir_entry *dir_dev;// for proc directory ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ struct wireless_dev *rtw_wdev; ++#endif //CONFIG_IOCTL_CFG80211 ++ ++#endif //end of PLATFORM_LINUX ++ ++#ifdef PLATFORM_FREEBSD ++ _nic_hdl pifp; ++ int bup; ++ _lock glock; ++#endif //PLATFORM_FREEBSD ++ int net_closed; ++ ++ u8 bFWReady; ++ u8 bReadPortCancel; ++ u8 bWritePortCancel; ++ u8 bRxRSSIDisplay; ++ // Added by Albert 2012/07/26 ++ // The driver will write the initial gain everytime when running in the DM_Write_DIG function. ++ u8 bForceWriteInitGain; ++ // Added by Albert 2012/10/26 ++ // The driver will show up the desired channel number when this flag is 1. ++ u8 bNotifyChannelChange; ++#ifdef CONFIG_P2P ++ // Added by Albert 2012/12/06 ++ // The driver will show the current P2P status when the upper application reads it. ++ u8 bShowGetP2PState; ++#endif ++#ifdef CONFIG_AUTOSUSPEND ++ u8 bDisableAutosuspend; ++#endif ++ ++ //pbuddy_adapter is used only in two inteface case, (iface_nums=2 in struct dvobj_priv) ++ //PRIMARY_ADAPTER's buddy is SECONDARY_ADAPTER ++ //SECONDARY_ADAPTER's buddy is PRIMARY_ADAPTER ++ //for iface_id > SECONDARY_ADAPTER(IFACE_ID1), refer to padapters[iface_id] in struct dvobj_priv ++ //and their pbuddy_adapter is PRIMARY_ADAPTER. ++ //for PRIMARY_ADAPTER(IFACE_ID0) can directly refer to if1 in struct dvobj_priv ++ _adapter *pbuddy_adapter; ++ ++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT) ++ u8 isprimary; //is primary adapter or not ++ //notes: ++ // if isprimary is true, the adapter_type value is 0, iface_id is IFACE_ID0 for PRIMARY_ADAPTER ++ // if isprimary is false, the adapter_type value is 1, iface_id is IFACE_ID1 for SECONDARY_ADAPTER ++ // refer to iface_id if iface_nums>2 and isprimary is false and the adapter_type value is 0xff. ++ u8 adapter_type;//used only in two inteface case(PRIMARY_ADAPTER and SECONDARY_ADAPTER) . ++ u8 iface_type; //interface port type, it depends on HW port ++#endif ++ ++ //extend to support multi interface ++ //IFACE_ID0 is equals to PRIMARY_ADAPTER ++ //IFACE_ID1 is equals to SECONDARY_ADAPTER ++ u8 iface_id; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ u8 DualMacConcurrent; // 1: DMSP 0:DMDP ++#endif ++ ++#ifdef CONFIG_BR_EXT ++ _lock br_ext_lock; ++ //unsigned int macclone_completed; ++ struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE]; ++ int pppoe_connection_in_progress; ++ unsigned char pppoe_addr[MACADDRLEN]; ++ unsigned char scdb_mac[MACADDRLEN]; ++ unsigned char scdb_ip[4]; ++ struct nat25_network_db_entry *scdb_entry; ++ unsigned char br_mac[MACADDRLEN]; ++ unsigned char br_ip[4]; ++ ++ struct br_ext_info ethBrExtInfo; ++#endif // CONFIG_BR_EXT ++ ++#ifdef CONFIG_INTEL_PROXIM ++ /* intel Proximity, should be alloc mem ++ * in intel Proximity module and can only ++ * be used in intel Proximity mode */ ++ struct proxim proximity; ++#endif //CONFIG_INTEL_PROXIM ++ ++#ifdef RTL8723A_SDIO_LOOPBACK ++ PLOOPBACKDATA ploopback; ++#endif ++ ++}; ++ ++#define adapter_to_dvobj(adapter) (adapter->dvobj) ++ ++int rtw_handle_dualmac(_adapter *adapter, bool init); ++ ++__inline static u8 *myid(struct eeprom_priv *peepriv) ++{ ++ return (peepriv->mac_addr); ++} ++ ++ ++#endif //__DRV_TYPES_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_ce.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_ce.h +new file mode 100644 +index 000000000000..25794fdaba54 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_ce.h +@@ -0,0 +1,92 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __DRV_TYPES_CE_H__ ++#define __DRV_TYPES_CE_H__ ++ ++#include ++#include ++ ++#include ++ ++#define MAX_ACTIVE_REG_PATH 256 ++ ++#define MAX_MCAST_LIST_NUM 32 ++ ++ ++ ++//for ioctl ++#define MAKE_DRIVER_VERSION(_MainVer,_MinorVer) ((((u32)(_MainVer))<<16)+_MinorVer) ++ ++#define NIC_HEADER_SIZE 14 //!< can be moved to typedef.h ++#define NIC_MAX_PACKET_SIZE 1514 //!< can be moved to typedef.h ++#define NIC_MAX_SEND_PACKETS 10 // max number of send packets the MiniportSendPackets function can accept, can be moved to typedef.h ++#define NIC_VENDOR_DRIVER_VERSION MAKE_DRIVER_VERSION(0,001) //!< can be moved to typedef.h ++#define NIC_MAX_PACKET_SIZE 1514 //!< can be moved to typedef.h ++ ++typedef struct _MP_REG_ENTRY ++{ ++ ++ NDIS_STRING RegName; // variable name text ++ BOOLEAN bRequired; // 1 -> required, 0 -> optional ++ ++ u8 Type; // NdisParameterInteger/NdisParameterHexInteger/NdisParameterStringle/NdisParameterMultiString ++ uint FieldOffset; // offset to MP_ADAPTER field ++ uint FieldSize; // size (in bytes) of the field ++ ++#ifdef UNDER_AMD64 ++ u64 Default; ++#else ++ u32 Default; // default value to use ++#endif ++ ++ u32 Min; // minimum value allowed ++ u32 Max; // maximum value allowed ++} MP_REG_ENTRY, *PMP_REG_ENTRY; ++ ++#ifdef CONFIG_USB_HCI ++typedef struct _USB_EXTENSION { ++ LPCUSB_FUNCS _lpUsbFuncs; ++ USB_HANDLE _hDevice; ++ PVOID pAdapter; ++ ++#if 0 ++ USB_ENDPOINT_DESCRIPTOR _endpACLIn; ++ USB_ENDPOINT_DESCRIPTOR _endpACLOutHigh; ++ USB_ENDPOINT_DESCRIPTOR _endpACLOutNormal; ++ ++ USB_PIPE pPipeIn; ++ USB_PIPE pPipeOutNormal; ++ USB_PIPE pPipeOutHigh; ++#endif ++ ++} USB_EXTENSION, *PUSB_EXTENSION; ++#endif ++ ++ ++typedef struct _OCTET_STRING{ ++ u8 *Octet; ++ u16 Length; ++} OCTET_STRING, *POCTET_STRING; ++ ++ ++ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_linux.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_linux.h +new file mode 100644 +index 000000000000..812b7440d4b0 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_linux.h +@@ -0,0 +1,24 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __DRV_TYPES_LINUX_H__ ++#define __DRV_TYPES_LINUX_H__ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_sdio.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_sdio.h +new file mode 100644 +index 000000000000..c44571290702 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_sdio.h +@@ -0,0 +1,69 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __DRV_TYPES_SDIO_H__ ++#define __DRV_TYPES_SDIO_H__ ++ ++#include ++#include ++ ++// SDIO Header Files ++#ifdef PLATFORM_LINUX ++#include ++#endif ++#ifdef PLATFORM_OS_XP ++#include ++#include ++#endif ++#ifdef PLATFORM_OS_CE ++#include ++#endif ++ ++ ++typedef struct sdio_data ++{ ++ u8 func_number; ++ ++ u8 tx_block_mode; ++ u8 rx_block_mode; ++ u32 block_transfer_len; ++ ++#ifdef PLATFORM_LINUX ++ struct sdio_func *func; ++#endif ++ ++#ifdef PLATFORM_OS_XP ++ PDEVICE_OBJECT pphysdevobj; ++ PDEVICE_OBJECT pfuncdevobj; ++ PDEVICE_OBJECT pnextdevobj; ++ SDBUS_INTERFACE_STANDARD sdbusinft; ++ u8 nextdevstacksz; ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ SD_DEVICE_HANDLE hDevice; ++ SD_CARD_RCA sd_rca; ++ SD_CARD_INTERFACE card_intf; ++ BOOLEAN enableIsarWithStatus; ++ WCHAR active_path[MAX_ACTIVE_REG_PATH]; ++ SD_HOST_BLOCK_CAPABILITY sd_host_blk_cap; ++#endif ++} SDIO_DATA, *PSDIO_DATA; ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_xp.h b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_xp.h +new file mode 100644 +index 000000000000..1d735d69dc92 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/drv_types_xp.h +@@ -0,0 +1,94 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __DRV_TYPES_XP_H__ ++#define __DRV_TYPES_XP_H__ ++ ++#include ++#include ++ ++ ++ ++#define MAX_MCAST_LIST_NUM 32 ++ ++ ++ ++//for ioctl ++#define MAKE_DRIVER_VERSION(_MainVer,_MinorVer) ((((u32)(_MainVer))<<16)+_MinorVer) ++ ++#define NIC_HEADER_SIZE 14 //!< can be moved to typedef.h ++#define NIC_MAX_PACKET_SIZE 1514 //!< can be moved to typedef.h ++#define NIC_MAX_SEND_PACKETS 10 // max number of send packets the MiniportSendPackets function can accept, can be moved to typedef.h ++#define NIC_VENDOR_DRIVER_VERSION MAKE_DRIVER_VERSION(0,001) //!< can be moved to typedef.h ++#define NIC_MAX_PACKET_SIZE 1514 //!< can be moved to typedef.h ++ ++ ++#undef ON_VISTA ++//added by Jackson ++#ifndef ON_VISTA ++// ++// Bus driver versions ++// ++ ++#define SDBUS_DRIVER_VERSION_1 0x100 ++#define SDBUS_DRIVER_VERSION_2 0x200 ++ ++#define SDP_FUNCTION_TYPE 4 ++#define SDP_BUS_DRIVER_VERSION 5 ++#define SDP_BUS_WIDTH 6 ++#define SDP_BUS_CLOCK 7 ++#define SDP_BUS_INTERFACE_CONTROL 8 ++#define SDP_HOST_BLOCK_LENGTH 9 ++#define SDP_FUNCTION_BLOCK_LENGTH 10 ++#define SDP_FN0_BLOCK_LENGTH 11 ++#define SDP_FUNCTION_INT_ENABLE 12 ++#endif ++ ++ ++typedef struct _MP_REG_ENTRY ++{ ++ ++ NDIS_STRING RegName; // variable name text ++ BOOLEAN bRequired; // 1 -> required, 0 -> optional ++ ++ u8 Type; // NdisParameterInteger/NdisParameterHexInteger/NdisParameterStringle/NdisParameterMultiString ++ uint FieldOffset; // offset to MP_ADAPTER field ++ uint FieldSize; // size (in bytes) of the field ++ ++#ifdef UNDER_AMD64 ++ u64 Default; ++#else ++ u32 Default; // default value to use ++#endif ++ ++ u32 Min; // minimum value allowed ++ u32 Max; // maximum value allowed ++} MP_REG_ENTRY, *PMP_REG_ENTRY; ++ ++ ++typedef struct _OCTET_STRING{ ++ u8 *Octet; ++ u16 Length; ++} OCTET_STRING, *POCTET_STRING; ++ ++ ++ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ethernet.h b/drivers/net/wireless/realtek/rtl8192cu/include/ethernet.h +new file mode 100644 +index 000000000000..e22c12b406e9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ethernet.h +@@ -0,0 +1,41 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/*! \file */ ++#ifndef __INC_ETHERNET_H ++#define __INC_ETHERNET_H ++ ++#define ETHERNET_ADDRESS_LENGTH 6 //!< Ethernet Address Length ++#define ETHERNET_HEADER_SIZE 14 //!< Ethernet Header Length ++#define LLC_HEADER_SIZE 6 //!< LLC Header Length ++#define TYPE_LENGTH_FIELD_SIZE 2 //!< Type/Length Size ++#define MINIMUM_ETHERNET_PACKET_SIZE 60 //!< Minimum Ethernet Packet Size ++#define MAXIMUM_ETHERNET_PACKET_SIZE 1514 //!< Maximum Ethernet Packet Size ++ ++#define RT_ETH_IS_MULTICAST(_pAddr) ((((UCHAR *)(_pAddr))[0]&0x01)!=0) //!< Is Multicast Address? ++#define RT_ETH_IS_BROADCAST(_pAddr) ( \ ++ ((UCHAR *)(_pAddr))[0]==0xff && \ ++ ((UCHAR *)(_pAddr))[1]==0xff && \ ++ ((UCHAR *)(_pAddr))[2]==0xff && \ ++ ((UCHAR *)(_pAddr))[3]==0xff && \ ++ ((UCHAR *)(_pAddr))[4]==0xff && \ ++ ((UCHAR *)(_pAddr))[5]==0xff ) //!< Is Broadcast Address? ++ ++ ++#endif // #ifndef __INC_ETHERNET_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/h2clbk.h b/drivers/net/wireless/realtek/rtl8192cu/include/h2clbk.h +new file mode 100644 +index 000000000000..847356e2d18f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/h2clbk.h +@@ -0,0 +1,35 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ ++#define _H2CLBK_H_ ++ ++ ++#include ++#include ++ ++ ++void _lbk_cmd(PADAPTER Adapter); ++ ++void _lbk_rsp(PADAPTER Adapter); ++ ++void _lbk_evt(IN PADAPTER Adapter); ++ ++void h2c_event_callback(unsigned char *dev, unsigned char *pbuf); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/hal_com.h b/drivers/net/wireless/realtek/rtl8192cu/include/hal_com.h +new file mode 100644 +index 000000000000..382f124da55c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/hal_com.h +@@ -0,0 +1,145 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __HAL_COMMON_H__ ++#define __HAL_COMMON_H__ ++ ++//CCK ++#define RATE_1M BIT(0) ++#define RATE_2M BIT(1) ++#define RATE_5_5M BIT(2) ++#define RATE_11M BIT(3) ++//OFDM ++#define RATE_6M BIT(4) ++#define RATE_9M BIT(5) ++#define RATE_12M BIT(6) ++#define RATE_18M BIT(7) ++#define RATE_24M BIT(8) ++#define RATE_36M BIT(9) ++#define RATE_48M BIT(10) ++#define RATE_54M BIT(11) ++//MCS 1 Spatial Stream ++#define RATE_MCS0 BIT(12) ++#define RATE_MCS1 BIT(13) ++#define RATE_MCS2 BIT(14) ++#define RATE_MCS3 BIT(15) ++#define RATE_MCS4 BIT(16) ++#define RATE_MCS5 BIT(17) ++#define RATE_MCS6 BIT(18) ++#define RATE_MCS7 BIT(19) ++//MCS 2 Spatial Stream ++#define RATE_MCS8 BIT(20) ++#define RATE_MCS9 BIT(21) ++#define RATE_MCS10 BIT(22) ++#define RATE_MCS11 BIT(23) ++#define RATE_MCS12 BIT(24) ++#define RATE_MCS13 BIT(25) ++#define RATE_MCS14 BIT(26) ++#define RATE_MCS15 BIT(27) ++ ++// ALL CCK Rate ++#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M ++#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\ ++ RATR_36M|RATR_48M|RATR_54M ++#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\ ++ RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7 ++#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\ ++ RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 ++ ++/*------------------------------ Tx Desc definition Macro ------------------------*/ ++//#pragma mark -- Tx Desc related definition. -- ++//---------------------------------------------------------------------------- ++//----------------------------------------------------------- ++// Rate ++//----------------------------------------------------------- ++// CCK Rates, TxHT = 0 ++#define DESC_RATE1M 0x00 ++#define DESC_RATE2M 0x01 ++#define DESC_RATE5_5M 0x02 ++#define DESC_RATE11M 0x03 ++ ++// OFDM Rates, TxHT = 0 ++#define DESC_RATE6M 0x04 ++#define DESC_RATE9M 0x05 ++#define DESC_RATE12M 0x06 ++#define DESC_RATE18M 0x07 ++#define DESC_RATE24M 0x08 ++#define DESC_RATE36M 0x09 ++#define DESC_RATE48M 0x0a ++#define DESC_RATE54M 0x0b ++ ++// MCS Rates, TxHT = 1 ++#define DESC_RATEMCS0 0x0c ++#define DESC_RATEMCS1 0x0d ++#define DESC_RATEMCS2 0x0e ++#define DESC_RATEMCS3 0x0f ++#define DESC_RATEMCS4 0x10 ++#define DESC_RATEMCS5 0x11 ++#define DESC_RATEMCS6 0x12 ++#define DESC_RATEMCS7 0x13 ++#define DESC_RATEMCS8 0x14 ++#define DESC_RATEMCS9 0x15 ++#define DESC_RATEMCS10 0x16 ++#define DESC_RATEMCS11 0x17 ++#define DESC_RATEMCS12 0x18 ++#define DESC_RATEMCS13 0x19 ++#define DESC_RATEMCS14 0x1a ++#define DESC_RATEMCS15 0x1b ++#define DESC_RATEMCS15_SG 0x1c ++#define DESC_RATEMCS32 0x20 ++ ++//============================================================ ++// Global var ++//============================================================ ++#define OFDM_TABLE_SIZE_92C 37 ++#define OFDM_TABLE_SIZE_92D 43 ++#define CCK_TABLE_SIZE 33 ++ ++extern u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D] ; ++ ++extern u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8]; ++ ++extern u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8]; ++ ++#ifdef CONFIG_CHIP_VER_INTEGRATION ++void dump_chip_info(HAL_VERSION ChipVersion); ++#endif ++ ++u8 //return the final channel plan decision ++hal_com_get_channel_plan( ++ IN PADAPTER padapter, ++ IN u8 hw_channel_plan, //channel plan from HW (efuse/eeprom) ++ IN u8 sw_channel_plan, //channel plan from SW (registry/module param) ++ IN u8 def_channel_plan, //channel plan used when the former two is invalid ++ IN BOOLEAN AutoLoadFail ++ ); ++ ++void HalSetBrateCfg( ++ IN PADAPTER Adapter, ++ IN u8 *mBratesOS, ++ OUT u16 *pBrateCfg); ++ ++u8 MRateToHwRate(u8 rate); ++ ++void hal_init_macaddr(_adapter *adapter); ++ ++void c2h_evt_clear(_adapter *adapter); ++s32 c2h_evt_read(_adapter *adapter, u8 *buf); ++ ++#endif //__HAL_COMMON_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/hal_intf.h b/drivers/net/wireless/realtek/rtl8192cu/include/hal_intf.h +new file mode 100644 +index 000000000000..cac4408c2e89 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/hal_intf.h +@@ -0,0 +1,431 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __HAL_INTF_H__ ++#define __HAL_INTF_H__ ++ ++#include ++#include ++#include ++ ++#ifdef CONFIG_PCI_HCI ++#include ++#endif ++ ++ ++enum RTL871X_HCI_TYPE { ++ ++ RTW_SDIO, ++ RTW_USB, ++ RTW_PCIE ++}; ++ ++enum _CHIP_TYPE { ++ ++ NULL_CHIP_TYPE, ++ RTL8712_8188S_8191S_8192S, ++ RTL8188C_8192C, ++ RTL8192D, ++ RTL8723A, ++ RTL8188E, ++ MAX_CHIP_TYPE ++}; ++ ++ ++typedef enum _HW_VARIABLES{ ++ HW_VAR_MEDIA_STATUS, ++ HW_VAR_MEDIA_STATUS1, ++ HW_VAR_SET_OPMODE, ++ HW_VAR_MAC_ADDR, ++ HW_VAR_BSSID, ++ HW_VAR_INIT_RTS_RATE, ++ HW_VAR_INIT_DATA_RATE, ++ HW_VAR_BASIC_RATE, ++ HW_VAR_TXPAUSE, ++ HW_VAR_BCN_FUNC, ++ HW_VAR_CORRECT_TSF, ++ HW_VAR_CHECK_BSSID, ++ HW_VAR_MLME_DISCONNECT, ++ HW_VAR_MLME_SITESURVEY, ++ HW_VAR_MLME_JOIN, ++ HW_VAR_ON_RCR_AM, ++ HW_VAR_OFF_RCR_AM, ++ HW_VAR_BEACON_INTERVAL, ++ HW_VAR_SLOT_TIME, ++ HW_VAR_RESP_SIFS, ++ HW_VAR_ACK_PREAMBLE, ++ HW_VAR_SEC_CFG, ++ HW_VAR_BCN_VALID, ++ HW_VAR_RF_TYPE, ++ HW_VAR_DM_FLAG, ++ HW_VAR_DM_FUNC_OP, ++ HW_VAR_DM_FUNC_SET, ++ HW_VAR_DM_FUNC_CLR, ++ HW_VAR_DM_INIT_PWDB, ++ HW_VAR_CAM_EMPTY_ENTRY, ++ HW_VAR_CAM_INVALID_ALL, ++ HW_VAR_CAM_WRITE, ++ HW_VAR_CAM_READ, ++ HW_VAR_AC_PARAM_VO, ++ HW_VAR_AC_PARAM_VI, ++ HW_VAR_AC_PARAM_BE, ++ HW_VAR_AC_PARAM_BK, ++ HW_VAR_ACM_CTRL, ++ HW_VAR_AMPDU_MIN_SPACE, ++ HW_VAR_AMPDU_FACTOR, ++ HW_VAR_RXDMA_AGG_PG_TH, ++ HW_VAR_SET_RPWM, ++ HW_VAR_H2C_FW_PWRMODE, ++ HW_VAR_H2C_FW_JOINBSSRPT, ++ HW_VAR_FWLPS_RF_ON, ++ HW_VAR_H2C_FW_P2P_PS_OFFLOAD, ++ HW_VAR_TDLS_WRCR, ++ HW_VAR_TDLS_INIT_CH_SEN, ++ HW_VAR_TDLS_RS_RCR, ++ HW_VAR_TDLS_DONE_CH_SEN, ++ HW_VAR_INITIAL_GAIN, ++ HW_VAR_TRIGGER_GPIO_0, ++ HW_VAR_BT_SET_COEXIST, ++ HW_VAR_BT_ISSUE_DELBA, ++ HW_VAR_CURRENT_ANTENNA, ++ HW_VAR_ANTENNA_DIVERSITY_LINK, ++ HW_VAR_ANTENNA_DIVERSITY_SELECT, ++ HW_VAR_SWITCH_EPHY_WoWLAN, ++ HW_VAR_EFUSE_BYTES, ++ HW_VAR_FIFO_CLEARN_UP, ++ HW_VAR_CHECK_TXBUF, ++ HW_VAR_APFM_ON_MAC, //Auto FSM to Turn On, include clock, isolation, power control for MAC only ++ HW_VAR_WOWLAN, ++ HW_VAR_VID, ++ HW_VAR_PID, ++ HW_VAR_MBSSID_CAM_WRITE, ++ HW_VAR_MBSSID_CAM_CLEAR, ++ HW_VAR_RCR_MBSSID_EN, ++ HW_VAR_USB_RXAGG_PAGE_TO, ++}HW_VARIABLES; ++ ++typedef enum _HAL_DEF_VARIABLE{ ++ HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, ++ HAL_DEF_IS_SUPPORT_ANT_DIV, ++ HAL_DEF_CURRENT_ANTENNA, ++ HAL_DEF_DRVINFO_SZ, ++ HAL_DEF_MAX_RECVBUF_SZ, ++ HAL_DEF_RX_PACKET_OFFSET, ++ HAL_DEF_DBG_DUMP_RXPKT,//for dbg ++ HAL_DEF_DBG_DM_FUNC,//for dbg ++ HAL_DEF_DUAL_MAC_MODE, ++}HAL_DEF_VARIABLE; ++ ++typedef enum _HAL_INTF_PS_FUNC{ ++ HAL_USB_SELECT_SUSPEND, ++ HAL_MAX_ID, ++}HAL_INTF_PS_FUNC; ++ ++typedef s32 (*c2h_id_filter)(u8 id); ++ ++struct hal_ops { ++ u32 (*hal_init)(PADAPTER Adapter); ++ u32 (*hal_deinit)(PADAPTER Adapter); ++ ++ void (*free_hal_data)(PADAPTER Adapter); ++ ++ u32 (*inirp_init)(PADAPTER Adapter); ++ u32 (*inirp_deinit)(PADAPTER Adapter); ++ ++ s32 (*init_xmit_priv)(PADAPTER Adapter); ++ void (*free_xmit_priv)(PADAPTER Adapter); ++ ++ s32 (*init_recv_priv)(PADAPTER Adapter); ++ void (*free_recv_priv)(PADAPTER Adapter); ++ ++ void (*InitSwLeds)(PADAPTER Adapter); ++ void (*DeInitSwLeds)(PADAPTER Adapter); ++ ++ void (*dm_init)(PADAPTER Adapter); ++ void (*dm_deinit)(PADAPTER Adapter); ++ void (*read_chip_version)(PADAPTER Adapter); ++ ++ void (*init_default_value)(PADAPTER Adapter); ++ ++ void (*intf_chip_configure)(PADAPTER Adapter); ++ ++ void (*read_adapter_info)(PADAPTER Adapter); ++ ++ void (*enable_interrupt)(PADAPTER Adapter); ++ void (*disable_interrupt)(PADAPTER Adapter); ++ s32 (*interrupt_handler)(PADAPTER Adapter); ++ ++ void (*set_bwmode_handler)(PADAPTER Adapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset); ++ void (*set_channel_handler)(PADAPTER Adapter, u8 channel); ++ ++ void (*hal_dm_watchdog)(PADAPTER Adapter); ++ ++ void (*SetHwRegHandler)(PADAPTER Adapter, u8 variable,u8* val); ++ void (*GetHwRegHandler)(PADAPTER Adapter, u8 variable,u8* val); ++ ++ u8 (*GetHalDefVarHandler)(PADAPTER Adapter, HAL_DEF_VARIABLE eVariable, PVOID pValue); ++ u8 (*SetHalDefVarHandler)(PADAPTER Adapter, HAL_DEF_VARIABLE eVariable, PVOID pValue); ++ ++ void (*UpdateRAMaskHandler)(PADAPTER Adapter, u32 mac_id); ++ void (*SetBeaconRelatedRegistersHandler)(PADAPTER Adapter); ++ ++ void (*Add_RateATid)(PADAPTER Adapter, u32 bitmap, u8 arg); ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ u8 (*AntDivBeforeLinkHandler)(PADAPTER Adapter); ++ void (*AntDivCompareHandler)(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src); ++#endif ++ u8 (*interface_ps_func)(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8* val); ++ ++ s32 (*hal_xmit)(PADAPTER Adapter, struct xmit_frame *pxmitframe); ++ s32 (*mgnt_xmit)(PADAPTER Adapter, struct xmit_frame *pmgntframe); ++ s32 (*hal_xmitframe_enqueue)(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++ u32 (*read_bbreg)(PADAPTER Adapter, u32 RegAddr, u32 BitMask); ++ void (*write_bbreg)(PADAPTER Adapter, u32 RegAddr, u32 BitMask, u32 Data); ++ u32 (*read_rfreg)(PADAPTER Adapter, u32 eRFPath, u32 RegAddr, u32 BitMask); ++ void (*write_rfreg)(PADAPTER Adapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data); ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ s32 (*hostap_mgnt_xmit_entry)(PADAPTER Adapter, _pkt *pkt); ++#endif ++ void (*EfusePowerSwitch)(PADAPTER pAdapter, u8 bWrite, u8 PwrState); ++ void (*ReadEFuse)(PADAPTER Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, BOOLEAN bPseudoTest); ++ void (*EFUSEGetEfuseDefinition)(PADAPTER pAdapter, u8 efuseType, u8 type, PVOID *pOut, BOOLEAN bPseudoTest); ++ u16 (*EfuseGetCurrentSize)(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest); ++ int (*Efuse_PgPacketRead)(PADAPTER pAdapter, u8 offset, u8 *data, BOOLEAN bPseudoTest); ++ int (*Efuse_PgPacketWrite)(PADAPTER pAdapter, u8 offset, u8 word_en, u8 *data, BOOLEAN bPseudoTest); ++ u8 (*Efuse_WordEnableDataWrite)(PADAPTER pAdapter, u16 efuse_addr, u8 word_en, u8 *data, BOOLEAN bPseudoTest); ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++ void (*sreset_init_value)(_adapter *padapter); ++ void (*sreset_reset_value)(_adapter *padapter); ++ void (*silentreset)(_adapter *padapter); ++ void (*sreset_xmit_status_check)(_adapter *padapter); ++ void (*sreset_linked_status_check) (_adapter *padapter); ++ u8 (*sreset_get_wifi_status)(_adapter *padapter); ++ bool (*sreset_inprogress)(_adapter *padapter); ++#endif ++ ++#ifdef CONFIG_IOL ++ int (*IOL_exec_cmds_sync)(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms); ++#endif ++ void (*hal_notch_filter)(_adapter * adapter, bool enable); ++ void (*hal_reset_security_engine)(_adapter * adapter); ++ ++ s32 (*c2h_handler)(_adapter *padapter, struct c2h_evt_hdr *c2h_evt); ++ c2h_id_filter c2h_id_filter_ccx; ++}; ++ ++typedef enum _RT_EEPROM_TYPE{ ++ EEPROM_93C46, ++ EEPROM_93C56, ++ EEPROM_BOOT_EFUSE, ++}RT_EEPROM_TYPE,*PRT_EEPROM_TYPE; ++ ++#define USB_HIGH_SPEED_BULK_SIZE 512 ++#define USB_FULL_SPEED_BULK_SIZE 64 ++ ++#define RF_CHANGE_BY_INIT 0 ++#define RF_CHANGE_BY_IPS BIT28 ++#define RF_CHANGE_BY_PS BIT29 ++#define RF_CHANGE_BY_HW BIT30 ++#define RF_CHANGE_BY_SW BIT31 ++ ++typedef enum _HARDWARE_TYPE{ ++ HARDWARE_TYPE_RTL8180, ++ HARDWARE_TYPE_RTL8185, ++ HARDWARE_TYPE_RTL8187, ++ HARDWARE_TYPE_RTL8188, ++ HARDWARE_TYPE_RTL8190P, ++ HARDWARE_TYPE_RTL8192E, ++ HARDWARE_TYPE_RTL819xU, ++ HARDWARE_TYPE_RTL8192SE, ++ HARDWARE_TYPE_RTL8192SU, ++ HARDWARE_TYPE_RTL8192CE, ++ HARDWARE_TYPE_RTL8192CU, ++ HARDWARE_TYPE_RTL8192DE, ++ HARDWARE_TYPE_RTL8192DU, ++ HARDWARE_TYPE_RTL8723AE, ++ HARDWARE_TYPE_RTL8723AU, ++ HARDWARE_TYPE_RTL8723AS, ++ HARDWARE_TYPE_RTL8188EE, ++ HARDWARE_TYPE_RTL8188EU, ++ HARDWARE_TYPE_RTL8188ES, ++ HARDWARE_TYPE_MAX, ++}HARDWARE_TYPE; ++ ++// ++// RTL8192C Series ++// ++#define IS_HARDWARE_TYPE_8192CE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192CE) ++#define IS_HARDWARE_TYPE_8192CU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192CU) ++#define IS_HARDWARE_TYPE_8192C(_Adapter) \ ++(IS_HARDWARE_TYPE_8192CE(_Adapter) || IS_HARDWARE_TYPE_8192CU(_Adapter)) ++ ++// ++// RTL8192D Series ++// ++#define IS_HARDWARE_TYPE_8192DE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192DE) ++#define IS_HARDWARE_TYPE_8192DU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192DU) ++#define IS_HARDWARE_TYPE_8192D(_Adapter) \ ++(IS_HARDWARE_TYPE_8192DE(_Adapter) || IS_HARDWARE_TYPE_8192DU(_Adapter)) ++ ++// ++// RTL8723A Series ++// ++#define IS_HARDWARE_TYPE_8723AE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AE) ++#define IS_HARDWARE_TYPE_8723AU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AU) ++#define IS_HARDWARE_TYPE_8723AS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AS) ++#define IS_HARDWARE_TYPE_8723A(_Adapter) \ ++(IS_HARDWARE_TYPE_8723AE(_Adapter) || IS_HARDWARE_TYPE_8723AU(_Adapter) || IS_HARDWARE_TYPE_8723AS(_Adapter)) ++ ++// ++// RTL8188E Series ++// ++#define IS_HARDWARE_TYPE_8188EE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EE) ++#define IS_HARDWARE_TYPE_8188EU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EU) ++#define IS_HARDWARE_TYPE_8188ES(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188ES) ++#define IS_HARDWARE_TYPE_8188E(_Adapter) \ ++(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || IS_HARDWARE_TYPE_8188ES(_Adapter)) ++ ++ ++typedef struct eeprom_priv EEPROM_EFUSE_PRIV, *PEEPROM_EFUSE_PRIV; ++#define GET_EEPROM_EFUSE_PRIV(priv) (&priv->eeprompriv) ++ ++#ifdef CONFIG_WOWLAN ++typedef enum _wowlan_subcode{ ++ WOWLAN_PATTERN_MATCH = 1, ++ WOWLAN_MAGIC_PACKET = 2, ++ WOWLAN_UNICAST = 3, ++ WOWLAN_SET_PATTERN = 4, ++ WOWLAN_DUMP_REG = 5, ++ WOWLAN_ENABLE = 6, ++ WOWLAN_DISABLE = 7, ++ WOWLAN_STATUS = 8, ++ WOWLAN_DEBUG_RELOAD_FW = 9, ++ WOWLAN_DEBUG_1 =10, ++ WOWLAN_DEBUG_2 =11 ++}wowlan_subcode; ++ ++struct wowlan_ioctl_param{ ++ unsigned int subcode; ++ unsigned int subcode_value; ++ unsigned int wakeup_reason; ++ unsigned int len; ++ unsigned char pattern[0]; ++}; ++ ++#define Rx_Pairwisekey BIT(0) ++#define Rx_GTK BIT(1) ++#define Rx_DisAssoc BIT(2) ++#define Rx_DeAuth BIT(3) ++#define FWDecisionDisconnect BIT(4) ++#define Rx_MagicPkt BIT(5) ++#define FinishBtFwPatch BIT(7) ++ ++#endif // CONFIG_WOWLAN ++ ++void rtw_hal_def_value_init(_adapter *padapter); ++void rtw_hal_free_data(_adapter *padapter); ++ ++void rtw_hal_dm_init(_adapter *padapter); ++void rtw_hal_dm_deinit(_adapter *padapter); ++void rtw_hal_sw_led_init(_adapter *padapter); ++void rtw_hal_sw_led_deinit(_adapter *padapter); ++ ++uint rtw_hal_init(_adapter *padapter); ++uint rtw_hal_deinit(_adapter *padapter); ++void rtw_hal_stop(_adapter *padapter); ++ ++void rtw_hal_set_hwreg(PADAPTER padapter, u8 variable, u8 *val); ++void rtw_hal_get_hwreg(PADAPTER padapter, u8 variable, u8 *val); ++ ++void rtw_hal_chip_configure(_adapter *padapter); ++void rtw_hal_read_chip_info(_adapter *padapter); ++void rtw_hal_read_chip_version(_adapter *padapter); ++ ++u8 rtw_hal_set_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue); ++u8 rtw_hal_get_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue); ++ ++void rtw_hal_enable_interrupt(_adapter *padapter); ++void rtw_hal_disable_interrupt(_adapter *padapter); ++ ++u32 rtw_hal_inirp_init(_adapter *padapter); ++u32 rtw_hal_inirp_deinit(_adapter *padapter); ++ ++u8 rtw_hal_intf_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id, u8* val); ++ ++s32 rtw_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++s32 rtw_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe); ++s32 rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe); ++ ++s32 rtw_hal_init_xmit_priv(_adapter *padapter); ++void rtw_hal_free_xmit_priv(_adapter *padapter); ++ ++s32 rtw_hal_init_recv_priv(_adapter *padapter); ++void rtw_hal_free_recv_priv(_adapter *padapter); ++ ++void rtw_hal_update_ra_mask(_adapter *padapter, u32 mac_id); ++void rtw_hal_add_ra_tid(_adapter *padapter, u32 bitmap, u8 arg); ++ ++void rtw_hal_bcn_related_reg_setting(_adapter *padapter); ++ ++u32 rtw_hal_read_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask); ++void rtw_hal_write_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask, u32 Data); ++u32 rtw_hal_read_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask); ++void rtw_hal_write_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data); ++ ++s32 rtw_hal_interrupt_handler(_adapter *padapter); ++ ++void rtw_hal_set_bwmode(_adapter *padapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset); ++void rtw_hal_set_chan(_adapter *padapter, u8 channel); ++ ++void rtw_hal_dm_watchdog(_adapter *padapter); ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++u8 rtw_hal_antdiv_before_linked(_adapter *padapter); ++void rtw_hal_antdiv_rssi_compared(_adapter *padapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src); ++#endif ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtw_hal_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt); ++#endif ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++void rtw_hal_sreset_init(_adapter *padapter); ++void rtw_hal_sreset_reset(_adapter *padapter); ++void rtw_hal_sreset_reset_value(_adapter *padapter); ++void rtw_hal_sreset_xmit_status_check(_adapter *padapter); ++void rtw_hal_sreset_linked_status_check(_adapter *padapter); ++u8 rtw_hal_sreset_get_wifi_status(_adapter *padapter); ++bool rtw_hal_sreset_inprogress(_adapter *padapter); ++#endif ++ ++#ifdef CONFIG_IOL ++int rtw_hal_iol_cmd(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms); ++#endif ++ ++void rtw_hal_notch_filter(_adapter * adapter, bool enable); ++void rtw_hal_reset_security_engine(_adapter * adapter); ++ ++s32 rtw_hal_c2h_handler(_adapter *adapter, struct c2h_evt_hdr *c2h_evt); ++c2h_id_filter rtw_hal_c2h_id_filter_ccx(_adapter *adapter); ++ ++#endif //__HAL_INTF_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211.h b/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211.h +new file mode 100644 +index 000000000000..b3735bd4e38d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211.h +@@ -0,0 +1,1579 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __IEEE80211_H ++#define __IEEE80211_H ++ ++ ++#ifndef CONFIG_RTL8711FW ++ ++ #include ++ #include ++ #include ++ #include "wifi.h" ++ ++ #if defined PLATFORM_OS_XP ++ #include ++ #endif ++ #if defined PLATFORM_LINUX ++ #include ++ #endif ++#else ++ ++ #include ++ ++#endif ++ ++#define MGMT_QUEUE_NUM 5 ++ ++#define ETH_ALEN 6 ++#define ETH_TYPE_LEN 2 ++#define PAYLOAD_TYPE_LEN 1 ++ ++#ifdef CONFIG_AP_MODE ++ ++#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28) ++ ++/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */ ++enum { ++ RTL871X_HOSTAPD_FLUSH = 1, ++ RTL871X_HOSTAPD_ADD_STA = 2, ++ RTL871X_HOSTAPD_REMOVE_STA = 3, ++ RTL871X_HOSTAPD_GET_INFO_STA = 4, ++ /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */ ++ RTL871X_HOSTAPD_GET_WPAIE_STA = 5, ++ RTL871X_SET_ENCRYPTION = 6, ++ RTL871X_GET_ENCRYPTION = 7, ++ RTL871X_HOSTAPD_SET_FLAGS_STA = 8, ++ RTL871X_HOSTAPD_GET_RID = 9, ++ RTL871X_HOSTAPD_SET_RID = 10, ++ RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11, ++ RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12, ++ RTL871X_HOSTAPD_MLME = 13, ++ RTL871X_HOSTAPD_SCAN_REQ = 14, ++ RTL871X_HOSTAPD_STA_CLEAR_STATS = 15, ++ RTL871X_HOSTAPD_SET_BEACON=16, ++ RTL871X_HOSTAPD_SET_WPS_BEACON = 17, ++ RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18, ++ RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19, ++ RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20, ++ RTL871X_HOSTAPD_SET_MACADDR_ACL = 21, ++ RTL871X_HOSTAPD_ACL_ADD_STA = 22, ++ RTL871X_HOSTAPD_ACL_REMOVE_STA = 23, ++}; ++ ++/* STA flags */ ++#define WLAN_STA_AUTH BIT(0) ++#define WLAN_STA_ASSOC BIT(1) ++#define WLAN_STA_PS BIT(2) ++#define WLAN_STA_TIM BIT(3) ++#define WLAN_STA_PERM BIT(4) ++#define WLAN_STA_AUTHORIZED BIT(5) ++#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */ ++#define WLAN_STA_SHORT_PREAMBLE BIT(7) ++#define WLAN_STA_PREAUTH BIT(8) ++#define WLAN_STA_WME BIT(9) ++#define WLAN_STA_MFP BIT(10) ++#define WLAN_STA_HT BIT(11) ++#define WLAN_STA_WPS BIT(12) ++#define WLAN_STA_MAYBE_WPS BIT(13) ++#define WLAN_STA_NONERP BIT(31) ++ ++#endif ++ ++#define IEEE_CMD_SET_WPA_PARAM 1 ++#define IEEE_CMD_SET_WPA_IE 2 ++#define IEEE_CMD_SET_ENCRYPTION 3 ++#define IEEE_CMD_MLME 4 ++ ++#define IEEE_PARAM_WPA_ENABLED 1 ++#define IEEE_PARAM_TKIP_COUNTERMEASURES 2 ++#define IEEE_PARAM_DROP_UNENCRYPTED 3 ++#define IEEE_PARAM_PRIVACY_INVOKED 4 ++#define IEEE_PARAM_AUTH_ALGS 5 ++#define IEEE_PARAM_IEEE_802_1X 6 ++#define IEEE_PARAM_WPAX_SELECT 7 ++ ++#define AUTH_ALG_OPEN_SYSTEM 0x1 ++#define AUTH_ALG_SHARED_KEY 0x2 ++#define AUTH_ALG_LEAP 0x00000004 ++ ++#define IEEE_MLME_STA_DEAUTH 1 ++#define IEEE_MLME_STA_DISASSOC 2 ++ ++#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2 ++#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3 ++#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4 ++#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5 ++#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6 ++#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7 ++ ++ ++#define IEEE_CRYPT_ALG_NAME_LEN 16 ++ ++#define WPA_CIPHER_NONE BIT(0) ++#define WPA_CIPHER_WEP40 BIT(1) ++#define WPA_CIPHER_WEP104 BIT(2) ++#define WPA_CIPHER_TKIP BIT(3) ++#define WPA_CIPHER_CCMP BIT(4) ++ ++ ++ ++#define WPA_SELECTOR_LEN 4 ++extern u8 RTW_WPA_OUI_TYPE[] ; ++extern u16 RTW_WPA_VERSION ; ++extern u8 WPA_AUTH_KEY_MGMT_NONE[]; ++extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[]; ++extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[]; ++extern u8 WPA_CIPHER_SUITE_NONE[]; ++extern u8 WPA_CIPHER_SUITE_WEP40[]; ++extern u8 WPA_CIPHER_SUITE_TKIP[]; ++extern u8 WPA_CIPHER_SUITE_WRAP[]; ++extern u8 WPA_CIPHER_SUITE_CCMP[]; ++extern u8 WPA_CIPHER_SUITE_WEP104[]; ++ ++ ++#define RSN_HEADER_LEN 4 ++#define RSN_SELECTOR_LEN 4 ++ ++extern u16 RSN_VERSION_BSD; ++extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[]; ++extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[]; ++extern u8 RSN_CIPHER_SUITE_NONE[]; ++extern u8 RSN_CIPHER_SUITE_WEP40[]; ++extern u8 RSN_CIPHER_SUITE_TKIP[]; ++extern u8 RSN_CIPHER_SUITE_WRAP[]; ++extern u8 RSN_CIPHER_SUITE_CCMP[]; ++extern u8 RSN_CIPHER_SUITE_WEP104[]; ++ ++typedef enum _RATR_TABLE_MODE{ ++ RATR_INX_WIRELESS_NGB = 0, // BGN 40 Mhz 2SS 1SS ++ RATR_INX_WIRELESS_NG = 1, // GN or N ++ RATR_INX_WIRELESS_NB = 2, // BGN 20 Mhz 2SS 1SS or BN ++ RATR_INX_WIRELESS_N = 3, ++ RATR_INX_WIRELESS_GB = 4, ++ RATR_INX_WIRELESS_G = 5, ++ RATR_INX_WIRELESS_B = 6, ++ RATR_INX_WIRELESS_MC = 7, ++ RATR_INX_WIRELESS_AC_N = 8, ++}RATR_TABLE_MODE, *PRATR_TABLE_MODE; ++ ++enum NETWORK_TYPE ++{ ++ WIRELESS_INVALID = 0, ++ //Sub-Element ++ WIRELESS_11B = BIT(0), // tx: cck only , rx: cck only, hw: cck ++ WIRELESS_11G = BIT(1), // tx: ofdm only, rx: ofdm & cck, hw: cck & ofdm ++ WIRELESS_11A = BIT(2), // tx: ofdm only, rx: ofdm only, hw: ofdm only ++ WIRELESS_11_24N = BIT(3), // tx: MCS only, rx: MCS & cck, hw: MCS & cck ++ WIRELESS_11_5N = BIT(4), // tx: MCS only, rx: MCS & ofdm, hw: ofdm only ++ //WIRELESS_AUTO = BIT(5), ++ WIRELESS_AC = BIT(6), ++ ++ //Combination ++ WIRELESS_11BG = (WIRELESS_11B|WIRELESS_11G), // tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm ++ WIRELESS_11G_24N = (WIRELESS_11G|WIRELESS_11_24N), // tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm ++ WIRELESS_11A_5N = (WIRELESS_11A|WIRELESS_11_5N), // tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only ++ WIRELESS_11BG_24N = (WIRELESS_11B|WIRELESS_11G|WIRELESS_11_24N), // tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck ++ WIRELESS_11AGN = (WIRELESS_11A|WIRELESS_11G|WIRELESS_11_24N|WIRELESS_11_5N), // tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only ++ WIRELESS_11ABGN = (WIRELESS_11A|WIRELESS_11B|WIRELESS_11G|WIRELESS_11_24N|WIRELESS_11_5N), ++}; ++ ++#define SUPPORTED_24G_NETTYPE_MSK (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N) ++#define SUPPORTED_5G_NETTYPE_MSK (WIRELESS_11A | WIRELESS_11_5N) ++ ++#define IsSupported24G(NetType) ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? _TRUE : _FALSE) ++#define IsSupported5G(NetType) ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? _TRUE : _FALSE) ++ ++#define IsEnableHWCCK(NetType) IsSupported24G(NetType) ++#define IsEnableHWOFDM(NetType) ((NetType) & (WIRELESS_11G|WIRELESS_11_24N|SUPPORTED_5G_NETTYPE_MSK) ? _TRUE : _FALSE) ++ ++#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType) ++#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType) ++#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType) ++ ++#define IsSupportedTxCCK(NetType) ((NetType) & (WIRELESS_11B) ? _TRUE : _FALSE) ++#define IsSupportedTxOFDM(NetType) ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? _TRUE : _FALSE) ++#define IsSupportedTxMCS(NetType) ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? _TRUE : _FALSE) ++ ++ ++typedef struct ieee_param { ++ u32 cmd; ++ u8 sta_addr[ETH_ALEN]; ++ union { ++ struct { ++ u8 name; ++ u32 value; ++ } wpa_param; ++ struct { ++ u32 len; ++ u8 reserved[32]; ++ u8 data[0]; ++ } wpa_ie; ++ struct{ ++ int command; ++ int reason_code; ++ } mlme; ++ struct { ++ u8 alg[IEEE_CRYPT_ALG_NAME_LEN]; ++ u8 set_tx; ++ u32 err; ++ u8 idx; ++ u8 seq[8]; /* sequence counter (set: RX, get: TX) */ ++ u16 key_len; ++ u8 key[0]; ++ } crypt; ++#ifdef CONFIG_AP_MODE ++ struct { ++ u16 aid; ++ u16 capability; ++ int flags; ++ u8 tx_supp_rates[16]; ++ struct rtw_ieee80211_ht_cap ht_cap; ++ } add_sta; ++ struct { ++ u8 reserved[2];//for set max_num_sta ++ u8 buf[0]; ++ } bcn_ie; ++#endif ++ ++ } u; ++}ieee_param; ++ ++#ifdef CONFIG_AP_MODE ++typedef struct ieee_param_ex { ++ u32 cmd; ++ u8 sta_addr[ETH_ALEN]; ++ u8 data[0]; ++}ieee_param_ex; ++ ++struct sta_data{ ++ u16 aid; ++ u16 capability; ++ int flags; ++ u32 sta_set; ++ u8 tx_supp_rates[16]; ++ u32 tx_supp_rates_len; ++ struct rtw_ieee80211_ht_cap ht_cap; ++ u64 rx_pkts; ++ u64 rx_bytes; ++ u64 rx_drops; ++ u64 tx_pkts; ++ u64 tx_bytes; ++ u64 tx_drops; ++}; ++#endif ++ ++ ++#if WIRELESS_EXT < 17 ++#define IW_QUAL_QUAL_INVALID 0x10 ++#define IW_QUAL_LEVEL_INVALID 0x20 ++#define IW_QUAL_NOISE_INVALID 0x40 ++#define IW_QUAL_QUAL_UPDATED 0x1 ++#define IW_QUAL_LEVEL_UPDATED 0x2 ++#define IW_QUAL_NOISE_UPDATED 0x4 ++#endif ++ ++#define IEEE80211_DATA_LEN 2304 ++/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section ++ 6.2.1.1.2. ++ ++ The figure in section 7.1.2 suggests a body size of up to 2312 ++ bytes is allowed, which is a bit confusing, I suspect this ++ represents the 2304 bytes of real data, plus a possible 8 bytes of ++ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ ++ ++ ++#define IEEE80211_HLEN 30 ++#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) ++ ++ ++/* this is stolen from ipw2200 driver */ ++#define IEEE_IBSS_MAC_HASH_SIZE 31 ++ ++struct ieee_ibss_seq { ++ u8 mac[ETH_ALEN]; ++ u16 seq_num; ++ u16 frag_num; ++ unsigned long packet_time; ++ _list list; ++}; ++ ++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW)||defined(PLATFORM_FREEBSD) ++ ++struct rtw_ieee80211_hdr { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++ u8 addr4[ETH_ALEN]; ++} __attribute__ ((packed)); ++ ++struct rtw_ieee80211_hdr_3addr { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++} __attribute__ ((packed)); ++ ++ ++struct rtw_ieee80211_hdr_qos { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++ u8 addr4[ETH_ALEN]; ++ u16 qc; ++} __attribute__ ((packed)); ++ ++struct rtw_ieee80211_hdr_3addr_qos { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++ u16 qc; ++} __attribute__ ((packed)); ++ ++struct eapol { ++ u8 snap[6]; ++ u16 ethertype; ++ u8 version; ++ u8 type; ++ u16 length; ++} __attribute__ ((packed)); ++ ++#endif ++ ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++struct rtw_ieee80211_hdr { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++ u8 addr4[ETH_ALEN]; ++}; ++ ++struct rtw_ieee80211_hdr_3addr { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[ETH_ALEN]; ++ u8 addr2[ETH_ALEN]; ++ u8 addr3[ETH_ALEN]; ++ u16 seq_ctl; ++}; ++ ++ ++struct rtw_ieee80211_hdr_qos { ++ struct rtw_ieee80211_hdr wlan_hdr; ++ u16 qc; ++}; ++ ++struct rtw_ieee80211_hdr_3addr_qos { ++ struct rtw_ieee80211_hdr_3addr wlan_hdr; ++ u16 qc; ++}; ++ ++struct eapol { ++ u8 snap[6]; ++ u16 ethertype; ++ u8 version; ++ u8 type; ++ u16 length; ++}; ++#pragma pack() ++ ++#endif ++ ++ ++ ++enum eap_type { ++ EAP_PACKET = 0, ++ EAPOL_START, ++ EAPOL_LOGOFF, ++ EAPOL_KEY, ++ EAPOL_ENCAP_ASF_ALERT ++}; ++ ++#define IEEE80211_3ADDR_LEN 24 ++#define IEEE80211_4ADDR_LEN 30 ++#define IEEE80211_FCS_LEN 4 ++ ++#define MIN_FRAG_THRESHOLD 256U ++#define MAX_FRAG_THRESHOLD 2346U ++ ++/* Frame control field constants */ ++#define RTW_IEEE80211_FCTL_VERS 0x0003 ++#define RTW_IEEE80211_FCTL_FTYPE 0x000c ++#define RTW_IEEE80211_FCTL_STYPE 0x00f0 ++#define RTW_IEEE80211_FCTL_TODS 0x0100 ++#define RTW_IEEE80211_FCTL_FROMDS 0x0200 ++#define RTW_IEEE80211_FCTL_MOREFRAGS 0x0400 ++#define RTW_IEEE80211_FCTL_RETRY 0x0800 ++#define RTW_IEEE80211_FCTL_PM 0x1000 ++#define RTW_IEEE80211_FCTL_MOREDATA 0x2000 ++#define RTW_IEEE80211_FCTL_PROTECTED 0x4000 ++#define RTW_IEEE80211_FCTL_ORDER 0x8000 ++#define RTW_IEEE80211_FCTL_CTL_EXT 0x0f00 ++ ++#define RTW_IEEE80211_FTYPE_MGMT 0x0000 ++#define RTW_IEEE80211_FTYPE_CTL 0x0004 ++#define RTW_IEEE80211_FTYPE_DATA 0x0008 ++#define RTW_IEEE80211_FTYPE_EXT 0x000c ++ ++/* management */ ++#define RTW_IEEE80211_STYPE_ASSOC_REQ 0x0000 ++#define RTW_IEEE80211_STYPE_ASSOC_RESP 0x0010 ++#define RTW_IEEE80211_STYPE_REASSOC_REQ 0x0020 ++#define RTW_IEEE80211_STYPE_REASSOC_RESP 0x0030 ++#define RTW_IEEE80211_STYPE_PROBE_REQ 0x0040 ++#define RTW_IEEE80211_STYPE_PROBE_RESP 0x0050 ++#define RTW_IEEE80211_STYPE_BEACON 0x0080 ++#define RTW_IEEE80211_STYPE_ATIM 0x0090 ++#define RTW_IEEE80211_STYPE_DISASSOC 0x00A0 ++#define RTW_IEEE80211_STYPE_AUTH 0x00B0 ++#define RTW_IEEE80211_STYPE_DEAUTH 0x00C0 ++#define RTW_IEEE80211_STYPE_ACTION 0x00D0 ++ ++/* control */ ++#define RTW_IEEE80211_STYPE_CTL_EXT 0x0060 ++#define RTW_IEEE80211_STYPE_BACK_REQ 0x0080 ++#define RTW_IEEE80211_STYPE_BACK 0x0090 ++#define RTW_IEEE80211_STYPE_PSPOLL 0x00A0 ++#define RTW_IEEE80211_STYPE_RTS 0x00B0 ++#define RTW_IEEE80211_STYPE_CTS 0x00C0 ++#define RTW_IEEE80211_STYPE_ACK 0x00D0 ++#define RTW_IEEE80211_STYPE_CFEND 0x00E0 ++#define RTW_IEEE80211_STYPE_CFENDACK 0x00F0 ++ ++/* data */ ++#define RTW_IEEE80211_STYPE_DATA 0x0000 ++#define RTW_IEEE80211_STYPE_DATA_CFACK 0x0010 ++#define RTW_IEEE80211_STYPE_DATA_CFPOLL 0x0020 ++#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 ++#define RTW_IEEE80211_STYPE_NULLFUNC 0x0040 ++#define RTW_IEEE80211_STYPE_CFACK 0x0050 ++#define RTW_IEEE80211_STYPE_CFPOLL 0x0060 ++#define RTW_IEEE80211_STYPE_CFACKPOLL 0x0070 ++#define RTW_IEEE80211_STYPE_QOS_DATA 0x0080 ++#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 ++#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 ++#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 ++#define RTW_IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 ++#define RTW_IEEE80211_STYPE_QOS_CFACK 0x00D0 ++#define RTW_IEEE80211_STYPE_QOS_CFPOLL 0x00E0 ++#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 ++ ++/* sequence control field */ ++#define RTW_IEEE80211_SCTL_FRAG 0x000F ++#define RTW_IEEE80211_SCTL_SEQ 0xFFF0 ++ ++ ++#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0) ++#define RTW_ERP_INFO_USE_PROTECTION BIT(1) ++#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2) ++ ++/* QoS,QOS */ ++#define NORMAL_ACK 0 ++#define NO_ACK 1 ++#define NON_EXPLICIT_ACK 2 ++#define BLOCK_ACK 3 ++ ++#ifndef ETH_P_PAE ++#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ ++#endif /* ETH_P_PAE */ ++ ++#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ ++ ++#define ETH_P_ECONET 0x0018 ++ ++#ifndef ETH_P_80211_RAW ++#define ETH_P_80211_RAW (ETH_P_ECONET + 1) ++#endif ++ ++/* IEEE 802.11 defines */ ++ ++#define P80211_OUI_LEN 3 ++ ++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW) || defined(PLATFORM_FREEBSD) ++ ++struct ieee80211_snap_hdr { ++ ++ u8 dsap; /* always 0xAA */ ++ u8 ssap; /* always 0xAA */ ++ u8 ctrl; /* always 0x03 */ ++ u8 oui[P80211_OUI_LEN]; /* organizational universal id */ ++ ++} __attribute__ ((packed)); ++ ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++struct ieee80211_snap_hdr { ++ ++ u8 dsap; /* always 0xAA */ ++ u8 ssap; /* always 0xAA */ ++ u8 ctrl; /* always 0x03 */ ++ u8 oui[P80211_OUI_LEN]; /* organizational universal id */ ++ ++}; ++#pragma pack() ++ ++#endif ++ ++ ++#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) ++ ++#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE) ++#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE) ++ ++#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f) ++ ++#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG) ++#define WLAN_GET_SEQ_SEQ(seq) ((seq) & RTW_IEEE80211_SCTL_SEQ) ++ ++/* Authentication algorithms */ ++#define WLAN_AUTH_OPEN 0 ++#define WLAN_AUTH_SHARED_KEY 1 ++ ++#define WLAN_AUTH_CHALLENGE_LEN 128 ++ ++#define WLAN_CAPABILITY_BSS (1<<0) ++#define WLAN_CAPABILITY_IBSS (1<<1) ++#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) ++#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) ++#define WLAN_CAPABILITY_PRIVACY (1<<4) ++#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) ++#define WLAN_CAPABILITY_PBCC (1<<6) ++#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) ++#define WLAN_CAPABILITY_SHORT_SLOT (1<<10) ++ ++/* Status codes */ ++#define WLAN_STATUS_SUCCESS 0 ++#define WLAN_STATUS_UNSPECIFIED_FAILURE 1 ++#define WLAN_STATUS_CAPS_UNSUPPORTED 10 ++#define WLAN_STATUS_REASSOC_NO_ASSOC 11 ++#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 ++#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 ++#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 ++#define WLAN_STATUS_CHALLENGE_FAIL 15 ++#define WLAN_STATUS_AUTH_TIMEOUT 16 ++#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 ++#define WLAN_STATUS_ASSOC_DENIED_RATES 18 ++/* 802.11b */ ++#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 ++#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 ++#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 ++ ++/* Reason codes */ ++#define WLAN_REASON_UNSPECIFIED 1 ++#define WLAN_REASON_PREV_AUTH_NOT_VALID 2 ++#define WLAN_REASON_DEAUTH_LEAVING 3 ++#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 ++#define WLAN_REASON_DISASSOC_AP_BUSY 5 ++#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 ++#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 ++#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 ++#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 ++#define WLAN_REASON_JOIN_WRONG_CHANNEL 65534 ++#define WLAN_REASON_EXPIRATION_CHK 65535 ++ ++/* Information Element IDs */ ++#define WLAN_EID_SSID 0 ++#define WLAN_EID_SUPP_RATES 1 ++#define WLAN_EID_FH_PARAMS 2 ++#define WLAN_EID_DS_PARAMS 3 ++#define WLAN_EID_CF_PARAMS 4 ++#define WLAN_EID_TIM 5 ++#define WLAN_EID_IBSS_PARAMS 6 ++#define WLAN_EID_CHALLENGE 16 ++/* EIDs defined by IEEE 802.11h - START */ ++#define WLAN_EID_PWR_CONSTRAINT 32 ++#define WLAN_EID_PWR_CAPABILITY 33 ++#define WLAN_EID_TPC_REQUEST 34 ++#define WLAN_EID_TPC_REPORT 35 ++#define WLAN_EID_SUPPORTED_CHANNELS 36 ++#define WLAN_EID_CHANNEL_SWITCH 37 ++#define WLAN_EID_MEASURE_REQUEST 38 ++#define WLAN_EID_MEASURE_REPORT 39 ++#define WLAN_EID_QUITE 40 ++#define WLAN_EID_IBSS_DFS 41 ++/* EIDs defined by IEEE 802.11h - END */ ++#define WLAN_EID_ERP_INFO 42 ++#define WLAN_EID_HT_CAP 45 ++#define WLAN_EID_RSN 48 ++#define WLAN_EID_EXT_SUPP_RATES 50 ++#define WLAN_EID_MOBILITY_DOMAIN 54 ++#define WLAN_EID_FAST_BSS_TRANSITION 55 ++#define WLAN_EID_TIMEOUT_INTERVAL 56 ++#define WLAN_EID_RIC_DATA 57 ++#define WLAN_EID_HT_OPERATION 61 ++#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62 ++#define WLAN_EID_20_40_BSS_COEXISTENCE 72 ++#define WLAN_EID_20_40_BSS_INTOLERANT 73 ++#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74 ++#define WLAN_EID_MMIE 76 ++#define WLAN_EID_VENDOR_SPECIFIC 221 ++#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC) ++ ++#define IEEE80211_MGMT_HDR_LEN 24 ++#define IEEE80211_DATA_HDR3_LEN 24 ++#define IEEE80211_DATA_HDR4_LEN 30 ++ ++ ++#define IEEE80211_STATMASK_SIGNAL (1<<0) ++#define IEEE80211_STATMASK_RSSI (1<<1) ++#define IEEE80211_STATMASK_NOISE (1<<2) ++#define IEEE80211_STATMASK_RATE (1<<3) ++#define IEEE80211_STATMASK_WEMASK 0x7 ++ ++ ++#define IEEE80211_CCK_MODULATION (1<<0) ++#define IEEE80211_OFDM_MODULATION (1<<1) ++ ++#define IEEE80211_24GHZ_BAND (1<<0) ++#define IEEE80211_52GHZ_BAND (1<<1) ++ ++#define IEEE80211_CCK_RATE_LEN 4 ++#define IEEE80211_NUM_OFDM_RATESLEN 8 ++ ++ ++#define IEEE80211_CCK_RATE_1MB 0x02 ++#define IEEE80211_CCK_RATE_2MB 0x04 ++#define IEEE80211_CCK_RATE_5MB 0x0B ++#define IEEE80211_CCK_RATE_11MB 0x16 ++#define IEEE80211_OFDM_RATE_LEN 8 ++#define IEEE80211_OFDM_RATE_6MB 0x0C ++#define IEEE80211_OFDM_RATE_9MB 0x12 ++#define IEEE80211_OFDM_RATE_12MB 0x18 ++#define IEEE80211_OFDM_RATE_18MB 0x24 ++#define IEEE80211_OFDM_RATE_24MB 0x30 ++#define IEEE80211_OFDM_RATE_36MB 0x48 ++#define IEEE80211_OFDM_RATE_48MB 0x60 ++#define IEEE80211_OFDM_RATE_54MB 0x6C ++#define IEEE80211_BASIC_RATE_MASK 0x80 ++ ++#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) ++#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) ++#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) ++#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) ++#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) ++#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) ++#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) ++#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) ++#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) ++#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) ++#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) ++#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) ++ ++#define IEEE80211_CCK_RATES_MASK 0x0000000F ++#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ ++ IEEE80211_CCK_RATE_2MB_MASK) ++#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ ++ IEEE80211_CCK_RATE_5MB_MASK | \ ++ IEEE80211_CCK_RATE_11MB_MASK) ++ ++#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 ++#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ ++ IEEE80211_OFDM_RATE_12MB_MASK | \ ++ IEEE80211_OFDM_RATE_24MB_MASK) ++#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ ++ IEEE80211_OFDM_RATE_9MB_MASK | \ ++ IEEE80211_OFDM_RATE_18MB_MASK | \ ++ IEEE80211_OFDM_RATE_36MB_MASK | \ ++ IEEE80211_OFDM_RATE_48MB_MASK | \ ++ IEEE80211_OFDM_RATE_54MB_MASK) ++#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ ++ IEEE80211_CCK_DEFAULT_RATES_MASK) ++ ++#define IEEE80211_NUM_OFDM_RATES 8 ++#define IEEE80211_NUM_CCK_RATES 4 ++#define IEEE80211_OFDM_SHIFT_MASK_A 4 ++ ++ ++ ++ ++/* NOTE: This data is for statistical purposes; not all hardware provides this ++ * information for frames received. Not setting these will not cause ++ * any adverse affects. */ ++struct ieee80211_rx_stats { ++ //u32 mac_time[2]; ++ s8 rssi; ++ u8 signal; ++ u8 noise; ++ u8 received_channel; ++ u16 rate; /* in 100 kbps */ ++ //u8 control; ++ u8 mask; ++ u8 freq; ++ u16 len; ++}; ++ ++/* IEEE 802.11 requires that STA supports concurrent reception of at least ++ * three fragmented frames. This define can be increased to support more ++ * concurrent frames, but it should be noted that each entry can consume about ++ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ ++#define IEEE80211_FRAG_CACHE_LEN 4 ++ ++struct ieee80211_frag_entry { ++ u32 first_frag_time; ++ uint seq; ++ uint last_frag; ++ uint qos; //jackson ++ uint tid; //jackson ++ struct sk_buff *skb; ++ u8 src_addr[ETH_ALEN]; ++ u8 dst_addr[ETH_ALEN]; ++}; ++ ++#ifndef PLATFORM_FREEBSD //Baron BSD has already defined ++struct ieee80211_stats { ++ uint tx_unicast_frames; ++ uint tx_multicast_frames; ++ uint tx_fragments; ++ uint tx_unicast_octets; ++ uint tx_multicast_octets; ++ uint tx_deferred_transmissions; ++ uint tx_single_retry_frames; ++ uint tx_multiple_retry_frames; ++ uint tx_retry_limit_exceeded; ++ uint tx_discards; ++ uint rx_unicast_frames; ++ uint rx_multicast_frames; ++ uint rx_fragments; ++ uint rx_unicast_octets; ++ uint rx_multicast_octets; ++ uint rx_fcs_errors; ++ uint rx_discards_no_buffer; ++ uint tx_discards_wrong_sa; ++ uint rx_discards_undecryptable; ++ uint rx_message_in_msg_fragments; ++ uint rx_message_in_bad_msg_fragments; ++}; ++#endif //PLATFORM_FREEBSD ++struct ieee80211_softmac_stats{ ++ uint rx_ass_ok; ++ uint rx_ass_err; ++ uint rx_probe_rq; ++ uint tx_probe_rs; ++ uint tx_beacons; ++ uint rx_auth_rq; ++ uint rx_auth_rs_ok; ++ uint rx_auth_rs_err; ++ uint tx_auth_rq; ++ uint no_auth_rs; ++ uint no_ass_rs; ++ uint tx_ass_rq; ++ uint rx_ass_rq; ++ uint tx_probe_rq; ++ uint reassoc; ++ uint swtxstop; ++ uint swtxawake; ++}; ++ ++#define SEC_KEY_1 (1<<0) ++#define SEC_KEY_2 (1<<1) ++#define SEC_KEY_3 (1<<2) ++#define SEC_KEY_4 (1<<3) ++#define SEC_ACTIVE_KEY (1<<4) ++#define SEC_AUTH_MODE (1<<5) ++#define SEC_UNICAST_GROUP (1<<6) ++#define SEC_LEVEL (1<<7) ++#define SEC_ENABLED (1<<8) ++ ++#define SEC_LEVEL_0 0 /* None */ ++#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ ++#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ ++#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ ++#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ ++ ++#define WEP_KEYS 4 ++#define WEP_KEY_LEN 13 ++ ++#ifdef CONFIG_IEEE80211W ++#define BIP_MAX_KEYID 5 ++#define BIP_AAD_SIZE 20 ++#endif //CONFIG_IEEE80211W ++ ++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW) ++ ++struct ieee80211_security { ++ u16 active_key:2, ++ enabled:1, ++ auth_mode:2, ++ auth_algo:4, ++ unicast_uses_group:1; ++ u8 key_sizes[WEP_KEYS]; ++ u8 keys[WEP_KEYS][WEP_KEY_LEN]; ++ u8 level; ++ u16 flags; ++} __attribute__ ((packed)); ++ ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++struct ieee80211_security { ++ u16 active_key:2, ++ enabled:1, ++ auth_mode:2, ++ auth_algo:4, ++ unicast_uses_group:1; ++ u8 key_sizes[WEP_KEYS]; ++ u8 keys[WEP_KEYS][WEP_KEY_LEN]; ++ u8 level; ++ u16 flags; ++} ; ++#pragma pack() ++ ++#endif ++ ++/* ++ ++ 802.11 data frame from AP ++ ++ ,-------------------------------------------------------------------. ++Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | ++ |------|------|---------|---------|---------|------|---------|------| ++Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs | ++ | | tion | (BSSID) | | | ence | data | | ++ `-------------------------------------------------------------------' ++ ++Total: 28-2340 bytes ++ ++*/ ++ ++struct ieee80211_header_data { ++ u16 frame_ctl; ++ u16 duration_id; ++ u8 addr1[6]; ++ u8 addr2[6]; ++ u8 addr3[6]; ++ u16 seq_ctrl; ++}; ++ ++#define BEACON_PROBE_SSID_ID_POSITION 12 ++ ++/* Management Frame Information Element Types */ ++#define MFIE_TYPE_SSID 0 ++#define MFIE_TYPE_RATES 1 ++#define MFIE_TYPE_FH_SET 2 ++#define MFIE_TYPE_DS_SET 3 ++#define MFIE_TYPE_CF_SET 4 ++#define MFIE_TYPE_TIM 5 ++#define MFIE_TYPE_IBSS_SET 6 ++#define MFIE_TYPE_CHALLENGE 16 ++#define MFIE_TYPE_ERP 42 ++#define MFIE_TYPE_RSN 48 ++#define MFIE_TYPE_RATES_EX 50 ++#define MFIE_TYPE_GENERIC 221 ++ ++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW) ++ ++struct ieee80211_info_element_hdr { ++ u8 id; ++ u8 len; ++} __attribute__ ((packed)); ++ ++struct ieee80211_info_element { ++ u8 id; ++ u8 len; ++ u8 data[0]; ++} __attribute__ ((packed)); ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++struct ieee80211_info_element_hdr { ++ u8 id; ++ u8 len; ++} ; ++ ++struct ieee80211_info_element { ++ u8 id; ++ u8 len; ++ u8 data[0]; ++} ; ++#pragma pack() ++ ++#endif ++ ++ ++/* ++ * These are the data types that can make up management packets ++ * ++ u16 auth_algorithm; ++ u16 auth_sequence; ++ u16 beacon_interval; ++ u16 capability; ++ u8 current_ap[ETH_ALEN]; ++ u16 listen_interval; ++ struct { ++ u16 association_id:14, reserved:2; ++ } __attribute__ ((packed)); ++ u32 time_stamp[2]; ++ u16 reason; ++ u16 status; ++*/ ++ ++#define IEEE80211_DEFAULT_TX_ESSID "Penguin" ++#define IEEE80211_DEFAULT_BASIC_RATE 10 ++ ++ ++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW) ++ ++ ++struct ieee80211_authentication { ++ struct ieee80211_header_data header; ++ u16 algorithm; ++ u16 transaction; ++ u16 status; ++ //struct ieee80211_info_element_hdr info_element; ++} __attribute__ ((packed)); ++ ++ ++struct ieee80211_probe_response { ++ struct ieee80211_header_data header; ++ u32 time_stamp[2]; ++ u16 beacon_interval; ++ u16 capability; ++ struct ieee80211_info_element info_element; ++} __attribute__ ((packed)); ++ ++struct ieee80211_probe_request { ++ struct ieee80211_header_data header; ++ /*struct ieee80211_info_element info_element;*/ ++} __attribute__ ((packed)); ++ ++struct ieee80211_assoc_request_frame { ++ struct rtw_ieee80211_hdr_3addr header; ++ u16 capability; ++ u16 listen_interval; ++ //u8 current_ap[ETH_ALEN]; ++ struct ieee80211_info_element_hdr info_element; ++} __attribute__ ((packed)); ++ ++struct ieee80211_assoc_response_frame { ++ struct rtw_ieee80211_hdr_3addr header; ++ u16 capability; ++ u16 status; ++ u16 aid; ++// struct ieee80211_info_element info_element; /* supported rates */ ++} __attribute__ ((packed)); ++#endif ++ ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++ ++struct ieee80211_authentication { ++ struct ieee80211_header_data header; ++ u16 algorithm; ++ u16 transaction; ++ u16 status; ++ //struct ieee80211_info_element_hdr info_element; ++} ; ++ ++ ++struct ieee80211_probe_response { ++ struct ieee80211_header_data header; ++ u32 time_stamp[2]; ++ u16 beacon_interval; ++ u16 capability; ++ struct ieee80211_info_element info_element; ++} ; ++ ++struct ieee80211_probe_request { ++ struct ieee80211_header_data header; ++ /*struct ieee80211_info_element info_element;*/ ++} ; ++ ++struct ieee80211_assoc_request_frame { ++ struct rtw_ieee80211_hdr_3addr header; ++ u16 capability; ++ u16 listen_interval; ++ //u8 current_ap[ETH_ALEN]; ++ struct ieee80211_info_element_hdr info_element; ++} ; ++ ++struct ieee80211_assoc_response_frame { ++ struct rtw_ieee80211_hdr_3addr header; ++ u16 capability; ++ u16 status; ++ u16 aid; ++// struct ieee80211_info_element info_element; /* supported rates */ ++}; ++ ++#pragma pack() ++ ++#endif ++ ++ ++ ++ ++struct ieee80211_txb { ++ u8 nr_frags; ++ u8 encrypted; ++ u16 reserved; ++ u16 frag_size; ++ u16 payload_size; ++ struct sk_buff *fragments[0]; ++}; ++ ++ ++/* SWEEP TABLE ENTRIES NUMBER*/ ++#define MAX_SWEEP_TAB_ENTRIES 42 ++#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 ++/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs ++ * only use 8, and then use extended rates for the remaining supported ++ * rates. Other APs, however, stick all of their supported rates on the ++ * main rates information element... */ ++#define MAX_RATES_LENGTH ((u8)12) ++#define MAX_RATES_EX_LENGTH ((u8)16) ++#define MAX_NETWORK_COUNT 128 ++#define MAX_CHANNEL_NUMBER 161 ++#define IEEE80211_SOFTMAC_SCAN_TIME 400 ++//(HZ / 2) ++#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2) ++ ++#define CRC_LENGTH 4U ++ ++#define MAX_WPA_IE_LEN (256) ++#define MAX_WPS_IE_LEN (512) ++#define MAX_P2P_IE_LEN (256) ++#define MAX_WFD_IE_LEN (128) ++ ++#define NETWORK_EMPTY_ESSID (1<<0) ++#define NETWORK_HAS_OFDM (1<<1) ++#define NETWORK_HAS_CCK (1<<2) ++ ++#define IEEE80211_DTIM_MBCAST 4 ++#define IEEE80211_DTIM_UCAST 2 ++#define IEEE80211_DTIM_VALID 1 ++#define IEEE80211_DTIM_INVALID 0 ++ ++#define IEEE80211_PS_DISABLED 0 ++#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST ++#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST ++#define IW_ESSID_MAX_SIZE 32 ++#if 0 ++struct ieee80211_network { ++ /* These entries are used to identify a unique network */ ++ u8 bssid[ETH_ALEN]; ++ u8 channel; ++ /* Ensure null-terminated for any debug msgs */ ++ u8 ssid[IW_ESSID_MAX_SIZE + 1]; ++ u8 ssid_len; ++ u8 rssi; //relative signal strength ++ u8 sq; //signal quality ++ ++ /* These are network statistics */ ++ //struct ieee80211_rx_stats stats; ++ u16 capability; ++ u16 aid; ++ u8 rates[MAX_RATES_LENGTH]; ++ u8 rates_len; ++ u8 rates_ex[MAX_RATES_EX_LENGTH]; ++ u8 rates_ex_len; ++ ++ u8 edca_parmsets[18]; ++ ++ u8 mode; ++ u8 flags; ++ u8 time_stamp[8]; ++ u16 beacon_interval; ++ u16 listen_interval; ++ u16 atim_window; ++ u8 wpa_ie[MAX_WPA_IE_LEN]; ++ size_t wpa_ie_len; ++ u8 rsn_ie[MAX_WPA_IE_LEN]; ++ size_t rsn_ie_len; ++ u8 country[6]; ++ u8 dtim_period; ++ u8 dtim_data; ++ u8 power_constraint; ++ u8 qosinfo; ++ u8 qbssload[5]; ++ u8 network_type; ++ int join_res; ++ unsigned long last_scanned; ++}; ++#endif ++/* ++join_res: ++-1: authentication fail ++-2: association fail ++> 0: TID ++*/ ++ ++#ifndef PLATFORM_FREEBSD //Baron BSD has already defined ++ ++enum ieee80211_state { ++ ++ /* the card is not linked at all */ ++ IEEE80211_NOLINK = 0, ++ ++ /* IEEE80211_ASSOCIATING* are for BSS client mode ++ * the driver shall not perform RX filtering unless ++ * the state is LINKED. ++ * The driver shall just check for the state LINKED and ++ * defaults to NOLINK for ALL the other states (including ++ * LINKED_SCANNING) ++ */ ++ ++ /* the association procedure will start (wq scheduling)*/ ++ IEEE80211_ASSOCIATING, ++ IEEE80211_ASSOCIATING_RETRY, ++ ++ /* the association procedure is sending AUTH request*/ ++ IEEE80211_ASSOCIATING_AUTHENTICATING, ++ ++ /* the association procedure has successfully authentcated ++ * and is sending association request ++ */ ++ IEEE80211_ASSOCIATING_AUTHENTICATED, ++ ++ /* the link is ok. the card associated to a BSS or linked ++ * to a ibss cell or acting as an AP and creating the bss ++ */ ++ IEEE80211_LINKED, ++ ++ /* same as LINKED, but the driver shall apply RX filter ++ * rules as we are in NO_LINK mode. As the card is still ++ * logically linked, but it is doing a syncro site survey ++ * then it will be back to LINKED state. ++ */ ++ IEEE80211_LINKED_SCANNING, ++ ++}; ++#endif //PLATFORM_FREEBSD ++ ++#define DEFAULT_MAX_SCAN_AGE (15 * HZ) ++#define DEFAULT_FTS 2346 ++#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" ++#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] ++ ++#ifdef PLATFORM_FREEBSD //Baron change func to macro ++#define is_multicast_mac_addr(Addr) ((((Addr[0]) & 0x01) == 0x01) && ((Addr[0]) != 0xff)) ++#define is_broadcast_mac_addr(Addr) ((((Addr[0]) & 0xff) == 0xff) && (((Addr[1]) & 0xff) == 0xff) && \ ++(((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \ ++(((Addr[5]) & 0xff) == 0xff)) ++#else ++extern __inline int is_multicast_mac_addr(const u8 *addr) ++{ ++ return ((addr[0] != 0xff) && (0x01 & addr[0])); ++} ++ ++extern __inline int is_broadcast_mac_addr(const u8 *addr) ++{ ++ return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ ++ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); ++} ++ ++extern __inline int is_zero_mac_addr(const u8 *addr) ++{ ++ return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && \ ++ (addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00)); ++} ++#endif //PLATFORM_FREEBSD ++ ++#define CFG_IEEE80211_RESERVE_FCS (1<<0) ++#define CFG_IEEE80211_COMPUTE_FCS (1<<1) ++ ++typedef struct tx_pending_t{ ++ int frag; ++ struct ieee80211_txb *txb; ++}tx_pending_t; ++ ++ ++ ++#define MAXTID 16 ++ ++#define IEEE_A (1<<0) ++#define IEEE_B (1<<1) ++#define IEEE_G (1<<2) ++#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) ++ ++//Baron move to ieee80211.c ++int ieee80211_is_empty_essid(const char *essid, int essid_len); ++int ieee80211_get_hdrlen(u16 fc); ++ ++#if 0 ++/* Action frame categories (IEEE 802.11-2007, 7.3.1.11, Table 7-24) */ ++#define WLAN_ACTION_SPECTRUM_MGMT 0 ++#define WLAN_ACTION_QOS 1 ++#define WLAN_ACTION_DLS 2 ++#define WLAN_ACTION_BLOCK_ACK 3 ++#define WLAN_ACTION_RADIO_MEASUREMENT 5 ++#define WLAN_ACTION_FT 6 ++#define WLAN_ACTION_SA_QUERY 8 ++#define WLAN_ACTION_WMM 17 ++#endif ++ ++ ++/* Action category code */ ++enum rtw_ieee80211_category { ++ RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0, ++ RTW_WLAN_CATEGORY_QOS = 1, ++ RTW_WLAN_CATEGORY_DLS = 2, ++ RTW_WLAN_CATEGORY_BACK = 3, ++ RTW_WLAN_CATEGORY_PUBLIC = 4, //IEEE 802.11 public action frames ++ RTW_WLAN_CATEGORY_RADIO_MEASUREMENT = 5, ++ RTW_WLAN_CATEGORY_FT = 6, ++ RTW_WLAN_CATEGORY_HT = 7, ++ RTW_WLAN_CATEGORY_SA_QUERY = 8, ++ RTW_WLAN_CATEGORY_UNPROTECTED_WNM = 11, // add for CONFIG_IEEE80211W, none 11w also can use ++ RTW_WLAN_CATEGORY_TDLS = 12, ++ RTW_WLAN_CATEGORY_SELF_PROTECTED = 15, // add for CONFIG_IEEE80211W, none 11w also can use ++ RTW_WLAN_CATEGORY_WMM = 17, ++ RTW_WLAN_CATEGORY_P2P = 0x7f,//P2P action frames ++}; ++ ++/* SPECTRUM_MGMT action code */ ++enum rtw_ieee80211_spectrum_mgmt_actioncode { ++ RTW_WLAN_ACTION_SPCT_MSR_REQ = 0, ++ RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1, ++ RTW_WLAN_ACTION_SPCT_TPC_REQ = 2, ++ RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3, ++ RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4, ++ RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5, ++}; ++ ++enum _PUBLIC_ACTION{ ++ ACT_PUBLIC_BSSCOEXIST = 0, // 20/40 BSS Coexistence ++ ACT_PUBLIC_DSE_ENABLE = 1, ++ ACT_PUBLIC_DSE_DEENABLE = 2, ++ ACT_PUBLIC_DSE_REG_LOCATION = 3, ++ ACT_PUBLIC_EXT_CHL_SWITCH = 4, ++ ACT_PUBLIC_DSE_MSR_REQ = 5, ++ ACT_PUBLIC_DSE_MSR_RPRT = 6, ++ ACT_PUBLIC_MP = 7, // Measurement Pilot ++ ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8, ++ ACT_PUBLIC_VENDOR = 9, // for WIFI_DIRECT ++ ACT_PUBLIC_GAS_INITIAL_REQ = 10, ++ ACT_PUBLIC_GAS_INITIAL_RSP = 11, ++ ACT_PUBLIC_GAS_COMEBACK_REQ = 12, ++ ACT_PUBLIC_GAS_COMEBACK_RSP = 13, ++ ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14, ++ ACT_PUBLIC_LOCATION_TRACK = 15, ++ ACT_PUBLIC_MAX ++}; ++ ++#ifdef CONFIG_TDLS ++enum TDLS_ACTION_FIELD{ ++ TDLS_SETUP_REQUEST = 0, ++ TDLS_SETUP_RESPONSE = 1, ++ TDLS_SETUP_CONFIRM = 2, ++ TDLS_TEARDOWN = 3, ++ TDLS_PEER_TRAFFIC_INDICATION = 4, ++ TDLS_CHANNEL_SWITCH_REQUEST = 5, ++ TDLS_CHANNEL_SWITCH_RESPONSE = 6, ++ TDLS_PEER_PSM_REQUEST = 7, ++ TDLS_PEER_PSM_RESPONSE = 8, ++ TDLS_PEER_TRAFFIC_RESPONSE = 9, ++ TDLS_DISCOVERY_REQUEST = 10, ++ TDLS_DISCOVERY_RESPONSE = 14, //it's used in public action frame ++}; ++ ++#define TUNNELED_PROBE_REQ 15 ++#define TUNNELED_PROBE_RSP 16 ++#endif //CONFIG_TDLS ++ ++/* BACK action code */ ++enum rtw_ieee80211_back_actioncode { ++ RTW_WLAN_ACTION_ADDBA_REQ = 0, ++ RTW_WLAN_ACTION_ADDBA_RESP = 1, ++ RTW_WLAN_ACTION_DELBA = 2, ++}; ++ ++/* HT features action code */ ++enum rtw_ieee80211_ht_actioncode { ++ RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0, ++ RTW_WLAN_ACTION_SM_PS = 1, ++ RTW_WLAN_ACTION_PSPM = 2, ++ RTW_WLAN_ACTION_PCO_PHASE = 3, ++ RTW_WLAN_ACTION_MIMO_CSI_MX = 4, ++ RTW_WLAN_ACTION_MIMO_NONCP_BF = 5, ++ RTW_WLAN_ACTION_MIMP_CP_BF = 6, ++ RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7, ++ RTW_WLAN_ACTION_HI_INFO_EXCHG = 8, ++}; ++ ++/* BACK (block-ack) parties */ ++enum rtw_ieee80211_back_parties { ++ RTW_WLAN_BACK_RECIPIENT = 0, ++ RTW_WLAN_BACK_INITIATOR = 1, ++ RTW_WLAN_BACK_TIMER = 2, ++}; ++ ++ ++#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs) ++ * 00:50:F2 */ ++#ifndef PLATFORM_FREEBSD //Baron BSD has defined ++#define WME_OUI_TYPE 2 ++#endif //PLATFORM_FREEBSD ++#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0 ++#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1 ++#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2 ++#define WME_VERSION 1 ++ ++#define WME_ACTION_CODE_SETUP_REQUEST 0 ++#define WME_ACTION_CODE_SETUP_RESPONSE 1 ++#define WME_ACTION_CODE_TEARDOWN 2 ++ ++#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0 ++#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1 ++#define WME_SETUP_RESPONSE_STATUS_REFUSED 3 ++ ++#define WME_TSPEC_DIRECTION_UPLINK 0 ++#define WME_TSPEC_DIRECTION_DOWNLINK 1 ++#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3 ++ ++ ++#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */ ++ ++#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */ ++ ++/** ++ * enum rtw_ieee80211_channel_flags - channel flags ++ * ++ * Channel flags set by the regulatory control code. ++ * ++ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled. ++ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted ++ * on this channel. ++ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. ++ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel. ++ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel ++ * is not permitted. ++ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel ++ * is not permitted. ++ */ ++ enum rtw_ieee80211_channel_flags { ++ RTW_IEEE80211_CHAN_DISABLED = 1<<0, ++ RTW_IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, ++ RTW_IEEE80211_CHAN_NO_IBSS = 1<<2, ++ RTW_IEEE80211_CHAN_RADAR = 1<<3, ++ RTW_IEEE80211_CHAN_NO_HT40PLUS = 1<<4, ++ RTW_IEEE80211_CHAN_NO_HT40MINUS = 1<<5, ++ }; ++ ++ #define RTW_IEEE80211_CHAN_NO_HT40 \ ++ (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS) ++ ++/* Represent channel details, subset of ieee80211_channel */ ++struct rtw_ieee80211_channel { ++ //enum ieee80211_band band; ++ //u16 center_freq; ++ u16 hw_value; ++ u32 flags; ++ //int max_antenna_gain; ++ //int max_power; ++ //int max_reg_power; ++ //bool beacon_found; ++ //u32 orig_flags; ++ //int orig_mag; ++ //int orig_mpwr; ++}; ++ ++#define CHAN_FMT \ ++ /*"band:%d, "*/ \ ++ /*"center_freq:%u, "*/ \ ++ "hw_value:%u, " \ ++ "flags:0x%08x" \ ++ /*"max_antenna_gain:%d\n"*/ \ ++ /*"max_power:%d\n"*/ \ ++ /*"max_reg_power:%d\n"*/ \ ++ /*"beacon_found:%u\n"*/ \ ++ /*"orig_flags:0x%08x\n"*/ \ ++ /*"orig_mag:%d\n"*/ \ ++ /*"orig_mpwr:%d\n"*/ ++ ++#define CHAN_ARG(channel) \ ++ /*(channel)->band*/ \ ++ /*, (channel)->center_freq*/ \ ++ (channel)->hw_value \ ++ , (channel)->flags \ ++ /*, (channel)->max_antenna_gain*/ \ ++ /*, (channel)->max_power*/ \ ++ /*, (channel)->max_reg_power*/ \ ++ /*, (channel)->beacon_found*/ \ ++ /*, (channel)->orig_flags*/ \ ++ /*, (channel)->orig_mag*/ \ ++ /*, (channel)->orig_mpwr*/ \ ++ ++/* Parsed Information Elements */ ++struct rtw_ieee802_11_elems { ++ u8 *ssid; ++ u8 ssid_len; ++ u8 *supp_rates; ++ u8 supp_rates_len; ++ u8 *fh_params; ++ u8 fh_params_len; ++ u8 *ds_params; ++ u8 ds_params_len; ++ u8 *cf_params; ++ u8 cf_params_len; ++ u8 *tim; ++ u8 tim_len; ++ u8 *ibss_params; ++ u8 ibss_params_len; ++ u8 *challenge; ++ u8 challenge_len; ++ u8 *erp_info; ++ u8 erp_info_len; ++ u8 *ext_supp_rates; ++ u8 ext_supp_rates_len; ++ u8 *wpa_ie; ++ u8 wpa_ie_len; ++ u8 *rsn_ie; ++ u8 rsn_ie_len; ++ u8 *wme; ++ u8 wme_len; ++ u8 *wme_tspec; ++ u8 wme_tspec_len; ++ u8 *wps_ie; ++ u8 wps_ie_len; ++ u8 *power_cap; ++ u8 power_cap_len; ++ u8 *supp_channels; ++ u8 supp_channels_len; ++ u8 *mdie; ++ u8 mdie_len; ++ u8 *ftie; ++ u8 ftie_len; ++ u8 *timeout_int; ++ u8 timeout_int_len; ++ u8 *ht_capabilities; ++ u8 ht_capabilities_len; ++ u8 *ht_operation; ++ u8 ht_operation_len; ++ u8 *vendor_ht_cap; ++ u8 vendor_ht_cap_len; ++}; ++ ++typedef enum { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 } ParseRes; ++ ++ParseRes rtw_ieee802_11_parse_elems(u8 *start, uint len, ++ struct rtw_ieee802_11_elems *elems, ++ int show_errors); ++ ++u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source, unsigned int *frlen); ++u8 *rtw_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen); ++ ++enum secondary_ch_offset { ++ SCN = 0, /* no secondary channel */ ++ SCA = 1, /* secondary channel above */ ++ SCB = 3, /* secondary channel below */ ++}; ++u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset); ++u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset); ++u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode, u8 new_ch, u8 ch_switch_cnt); ++u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len, u8 secondary_ch_offset); ++u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl, u8 flags, u16 reason, u16 precedence); ++ ++u8 *rtw_get_ie(u8*pbuf, sint index, sint *len, sint limit); ++u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui, u8 oui_len, u8 *ie, uint *ielen); ++int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset, u8 eid, u8 *oui, u8 oui_len); ++ ++void rtw_set_supported_rate(u8* SupportedRates, uint mode) ; ++ ++unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit); ++unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit); ++int rtw_get_wpa_cipher_suite(u8 *s); ++int rtw_get_wpa2_cipher_suite(u8 *s); ++int rtw_parse_wpa_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher); ++int rtw_parse_wpa2_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher); ++ ++int rtw_get_sec_ie(u8 *in_ie,uint in_len,u8 *rsn_ie,u16 *rsn_len,u8 *wpa_ie,u16 *wpa_len); ++ ++u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen); ++u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen); ++u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_attr, u32 *len_attr); ++u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_content, uint *len_content); ++ ++/** ++ * for_each_ie - iterate over continuous IEs ++ * @ie: ++ * @buf: ++ * @buf_len: ++ */ ++#define for_each_ie(ie, buf, buf_len) \ ++ for (ie = (void*)buf; (((u8*)ie) - ((u8*)buf) + 1) < buf_len; ie = (void*)(((u8*)ie) + *(((u8*)ie)+1) + 2)) ++ ++void dump_ies(u8 *buf, u32 buf_len); ++void dump_wps_ie(u8 *ie, u32 ie_len); ++ ++#ifdef CONFIG_P2P ++u32 rtw_get_p2p_merged_ies_len(u8 *in_ie, u32 in_len); ++int rtw_p2p_merge_ies(u8 *in_ie, u32 in_len, u8 *merge_ie); ++void dump_p2p_ie(u8 *ie, u32 ie_len); ++u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen); ++u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_attr, u32 *len_attr); ++u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_content, uint *len_content); ++u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len, u8 *pdata_attr); ++void rtw_WLAN_BSSID_EX_remove_p2p_attr(WLAN_BSSID_EX *bss_ex, u8 attr_id); ++#endif ++ ++#ifdef CONFIG_WFD ++int rtw_get_wfd_ie(u8 *in_ie, int in_len, u8 *wfd_ie, uint *wfd_ielen); ++int rtw_get_wfd_attr_content(u8 *wfd_ie, uint wfd_ielen, u8 target_attr_id ,u8 *attr_content, uint *attr_contentlen); ++#endif // CONFIG_WFD ++ ++uint rtw_get_rateset_len(u8 *rateset); ++ ++struct registry_priv; ++int rtw_generate_ie(struct registry_priv *pregistrypriv); ++ ++ ++int rtw_get_bit_value_from_ieee_value(u8 val); ++ ++uint rtw_is_cckrates_included(u8 *rate); ++ ++uint rtw_is_cckratesonly_included(u8 *rate); ++ ++int rtw_check_network_type(unsigned char *rate, int ratelen, int channel); ++ ++void rtw_macaddr_cfg(u8 *mac_addr); ++ ++u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40, unsigned char * MCS_rate); ++ ++int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8* category, u8 *action); ++const char *action_public_str(u8 action); ++ ++#endif /* IEEE80211_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211_ext.h b/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211_ext.h +new file mode 100644 +index 000000000000..eba9001571c5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ieee80211_ext.h +@@ -0,0 +1,476 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __IEEE80211_EXT_H ++#define __IEEE80211_EXT_H ++ ++#include ++#include ++#include ++ ++#define WMM_OUI_TYPE 2 ++#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0 ++#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1 ++#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2 ++#define WMM_VERSION 1 ++ ++#define WPA_PROTO_WPA BIT(0) ++#define WPA_PROTO_RSN BIT(1) ++ ++#define WPA_KEY_MGMT_IEEE8021X BIT(0) ++#define WPA_KEY_MGMT_PSK BIT(1) ++#define WPA_KEY_MGMT_NONE BIT(2) ++#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3) ++#define WPA_KEY_MGMT_WPA_NONE BIT(4) ++ ++ ++#define WPA_CAPABILITY_PREAUTH BIT(0) ++#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6) ++#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9) ++ ++ ++#define PMKID_LEN 16 ++ ++ ++#ifdef PLATFORM_LINUX ++struct wpa_ie_hdr { ++ u8 elem_id; ++ u8 len; ++ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */ ++ u8 version[2]; /* little endian */ ++}__attribute__ ((packed)); ++ ++struct rsn_ie_hdr { ++ u8 elem_id; /* WLAN_EID_RSN */ ++ u8 len; ++ u8 version[2]; /* little endian */ ++}__attribute__ ((packed)); ++ ++struct wme_ac_parameter { ++#if defined(CONFIG_LITTLE_ENDIAN) ++ /* byte 1 */ ++ u8 aifsn:4, ++ acm:1, ++ aci:2, ++ reserved:1; ++ ++ /* byte 2 */ ++ u8 eCWmin:4, ++ eCWmax:4; ++#elif defined(CONFIG_BIG_ENDIAN) ++ /* byte 1 */ ++ u8 reserved:1, ++ aci:2, ++ acm:1, ++ aifsn:4; ++ ++ /* byte 2 */ ++ u8 eCWmax:4, ++ eCWmin:4; ++#else ++#error "Please fix " ++#endif ++ ++ /* bytes 3 & 4 */ ++ u16 txopLimit; ++} __attribute__ ((packed)); ++ ++struct wme_parameter_element { ++ /* required fields for WME version 1 */ ++ u8 oui[3]; ++ u8 oui_type; ++ u8 oui_subtype; ++ u8 version; ++ u8 acInfo; ++ u8 reserved; ++ struct wme_ac_parameter ac[4]; ++ ++} __attribute__ ((packed)); ++ ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++ ++struct wpa_ie_hdr { ++ u8 elem_id; ++ u8 len; ++ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */ ++ u8 version[2]; /* little endian */ ++}; ++ ++struct rsn_ie_hdr { ++ u8 elem_id; /* WLAN_EID_RSN */ ++ u8 len; ++ u8 version[2]; /* little endian */ ++}; ++ ++#pragma pack() ++ ++#endif ++ ++#define WPA_PUT_LE16(a, val) \ ++ do { \ ++ (a)[1] = ((u16) (val)) >> 8; \ ++ (a)[0] = ((u16) (val)) & 0xff; \ ++ } while (0) ++ ++#define WPA_PUT_BE32(a, val) \ ++ do { \ ++ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[3] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define WPA_PUT_LE32(a, val) \ ++ do { \ ++ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \ ++ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[0] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *) (a), (val)) ++//#define RSN_SELECTOR_PUT(a, val) WPA_PUT_LE32((u8 *) (a), (val)) ++ ++ ++ ++/* Action category code */ ++enum ieee80211_category { ++ WLAN_CATEGORY_SPECTRUM_MGMT = 0, ++ WLAN_CATEGORY_QOS = 1, ++ WLAN_CATEGORY_DLS = 2, ++ WLAN_CATEGORY_BACK = 3, ++ WLAN_CATEGORY_HT = 7, ++ WLAN_CATEGORY_WMM = 17, ++}; ++ ++/* SPECTRUM_MGMT action code */ ++enum ieee80211_spectrum_mgmt_actioncode { ++ WLAN_ACTION_SPCT_MSR_REQ = 0, ++ WLAN_ACTION_SPCT_MSR_RPRT = 1, ++ WLAN_ACTION_SPCT_TPC_REQ = 2, ++ WLAN_ACTION_SPCT_TPC_RPRT = 3, ++ WLAN_ACTION_SPCT_CHL_SWITCH = 4, ++ WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5, ++}; ++ ++/* BACK action code */ ++enum ieee80211_back_actioncode { ++ WLAN_ACTION_ADDBA_REQ = 0, ++ WLAN_ACTION_ADDBA_RESP = 1, ++ WLAN_ACTION_DELBA = 2, ++}; ++ ++/* HT features action code */ ++enum ieee80211_ht_actioncode { ++ WLAN_ACTION_NOTIFY_CH_WIDTH = 0, ++ WLAN_ACTION_SM_PS = 1, ++ WLAN_ACTION_PSPM = 2, ++ WLAN_ACTION_PCO_PHASE = 3, ++ WLAN_ACTION_MIMO_CSI_MX = 4, ++ WLAN_ACTION_MIMO_NONCP_BF = 5, ++ WLAN_ACTION_MIMP_CP_BF = 6, ++ WLAN_ACTION_ASEL_INDICATES_FB = 7, ++ WLAN_ACTION_HI_INFO_EXCHG = 8, ++}; ++ ++/* BACK (block-ack) parties */ ++enum ieee80211_back_parties { ++ WLAN_BACK_RECIPIENT = 0, ++ WLAN_BACK_INITIATOR = 1, ++ WLAN_BACK_TIMER = 2, ++}; ++ ++#ifdef PLATFORM_LINUX ++ ++struct ieee80211_mgmt { ++ u16 frame_control; ++ u16 duration; ++ u8 da[6]; ++ u8 sa[6]; ++ u8 bssid[6]; ++ u16 seq_ctrl; ++ union { ++ struct { ++ u16 auth_alg; ++ u16 auth_transaction; ++ u16 status_code; ++ /* possibly followed by Challenge text */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) auth; ++ struct { ++ u16 reason_code; ++ } __attribute__ ((packed)) deauth; ++ struct { ++ u16 capab_info; ++ u16 listen_interval; ++ /* followed by SSID and Supported rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) assoc_req; ++ struct { ++ u16 capab_info; ++ u16 status_code; ++ u16 aid; ++ /* followed by Supported rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) assoc_resp, reassoc_resp; ++ struct { ++ u16 capab_info; ++ u16 listen_interval; ++ u8 current_ap[6]; ++ /* followed by SSID and Supported rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) reassoc_req; ++ struct { ++ u16 reason_code; ++ } __attribute__ ((packed)) disassoc; ++ struct { ++ __le64 timestamp; ++ u16 beacon_int; ++ u16 capab_info; ++ /* followed by some of SSID, Supported rates, ++ * FH Params, DS Params, CF Params, IBSS Params, TIM */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) beacon; ++ struct { ++ /* only variable items: SSID, Supported rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) probe_req; ++ struct { ++ __le64 timestamp; ++ u16 beacon_int; ++ u16 capab_info; ++ /* followed by some of SSID, Supported rates, ++ * FH Params, DS Params, CF Params, IBSS Params */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) probe_resp; ++ struct { ++ u8 category; ++ union { ++ struct { ++ u8 action_code; ++ u8 dialog_token; ++ u8 status_code; ++ u8 variable[0]; ++ } __attribute__ ((packed)) wme_action; ++#if 0 ++ struct{ ++ u8 action_code; ++ u8 element_id; ++ u8 length; ++ struct ieee80211_channel_sw_ie sw_elem; ++ } __attribute__ ((packed)) chan_switch; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u8 element_id; ++ u8 length; ++ struct ieee80211_msrment_ie msr_elem; ++ } __attribute__ ((packed)) measurement; ++#endif ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u16 capab; ++ u16 timeout; ++ u16 start_seq_num; ++ } __attribute__ ((packed)) addba_req; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u16 status; ++ u16 capab; ++ u16 timeout; ++ } __attribute__ ((packed)) addba_resp; ++ struct{ ++ u8 action_code; ++ u16 params; ++ u16 reason_code; ++ } __attribute__ ((packed)) delba; ++ struct{ ++ u8 action_code; ++ /* capab_info for open and confirm, ++ * reason for close ++ */ ++ u16 aux; ++ /* Followed in plink_confirm by status ++ * code, AID and supported rates, ++ * and directly by supported rates in ++ * plink_open and plink_close ++ */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) plink_action; ++ struct{ ++ u8 action_code; ++ u8 variable[0]; ++ } __attribute__ ((packed)) mesh_action; ++ } __attribute__ ((packed)) u; ++ } __attribute__ ((packed)) action; ++ } __attribute__ ((packed)) u; ++}__attribute__ ((packed)); ++ ++#endif ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++ ++struct ieee80211_mgmt { ++ u16 frame_control; ++ u16 duration; ++ u8 da[6]; ++ u8 sa[6]; ++ u8 bssid[6]; ++ u16 seq_ctrl; ++ union { ++ struct { ++ u16 auth_alg; ++ u16 auth_transaction; ++ u16 status_code; ++ /* possibly followed by Challenge text */ ++ u8 variable[0]; ++ } auth; ++ struct { ++ u16 reason_code; ++ } deauth; ++ struct { ++ u16 capab_info; ++ u16 listen_interval; ++ /* followed by SSID and Supported rates */ ++ u8 variable[0]; ++ } assoc_req; ++ struct { ++ u16 capab_info; ++ u16 status_code; ++ u16 aid; ++ /* followed by Supported rates */ ++ u8 variable[0]; ++ } assoc_resp, reassoc_resp; ++ struct { ++ u16 capab_info; ++ u16 listen_interval; ++ u8 current_ap[6]; ++ /* followed by SSID and Supported rates */ ++ u8 variable[0]; ++ } reassoc_req; ++ struct { ++ u16 reason_code; ++ } disassoc; ++#if 0 ++ struct { ++ __le64 timestamp; ++ u16 beacon_int; ++ u16 capab_info; ++ /* followed by some of SSID, Supported rates, ++ * FH Params, DS Params, CF Params, IBSS Params, TIM */ ++ u8 variable[0]; ++ } beacon; ++ struct { ++ /* only variable items: SSID, Supported rates */ ++ u8 variable[0]; ++ } probe_req; ++ ++ struct { ++ __le64 timestamp; ++ u16 beacon_int; ++ u16 capab_info; ++ /* followed by some of SSID, Supported rates, ++ * FH Params, DS Params, CF Params, IBSS Params */ ++ u8 variable[0]; ++ } probe_resp; ++#endif ++ struct { ++ u8 category; ++ union { ++ struct { ++ u8 action_code; ++ u8 dialog_token; ++ u8 status_code; ++ u8 variable[0]; ++ } wme_action; ++/* ++ struct{ ++ u8 action_code; ++ u8 element_id; ++ u8 length; ++ struct ieee80211_channel_sw_ie sw_elem; ++ } chan_switch; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u8 element_id; ++ u8 length; ++ struct ieee80211_msrment_ie msr_elem; ++ } measurement; ++*/ ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u16 capab; ++ u16 timeout; ++ u16 start_seq_num; ++ } addba_req; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ u16 status; ++ u16 capab; ++ u16 timeout; ++ } addba_resp; ++ struct{ ++ u8 action_code; ++ u16 params; ++ u16 reason_code; ++ } delba; ++ struct{ ++ u8 action_code; ++ /* capab_info for open and confirm, ++ * reason for close ++ */ ++ u16 aux; ++ /* Followed in plink_confirm by status ++ * code, AID and supported rates, ++ * and directly by supported rates in ++ * plink_open and plink_close ++ */ ++ u8 variable[0]; ++ } plink_action; ++ struct{ ++ u8 action_code; ++ u8 variable[0]; ++ } mesh_action; ++ } u; ++ } action; ++ } u; ++} ; ++ ++#pragma pack() ++ ++#endif ++ ++/* mgmt header + 1 byte category code */ ++#define IEEE80211_MIN_ACTION_SIZE FIELD_OFFSET(struct ieee80211_mgmt, u.action.u) ++ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/if_ether.h b/drivers/net/wireless/realtek/rtl8192cu/include/if_ether.h +new file mode 100644 +index 000000000000..c81c536b2060 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/if_ether.h +@@ -0,0 +1,112 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef _LINUX_IF_ETHER_H ++#define _LINUX_IF_ETHER_H ++ ++/* ++ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble ++ * and FCS/CRC (frame check sequence). ++ */ ++ ++#define ETH_ALEN 6 /* Octets in one ethernet addr */ ++#define ETH_HLEN 14 /* Total octets in header. */ ++#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ ++#define ETH_DATA_LEN 1500 /* Max. octets in payload */ ++#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ ++ ++/* ++ * These are the defined Ethernet Protocol ID's. ++ */ ++ ++#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ ++#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ ++#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ ++#define ETH_P_IP 0x0800 /* Internet Protocol packet */ ++#define ETH_P_X25 0x0805 /* CCITT X.25 */ ++#define ETH_P_ARP 0x0806 /* Address Resolution packet */ ++#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ ++#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ ++#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ ++#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ ++#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ ++#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ ++#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ ++#define ETH_P_LAT 0x6004 /* DEC LAT */ ++#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ ++#define ETH_P_CUST 0x6006 /* DEC Customer use */ ++#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ ++#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ ++#define ETH_P_ATALK 0x809B /* Appletalk DDP */ ++#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ ++#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ ++#define ETH_P_IPX 0x8137 /* IPX over DIX */ ++#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ ++#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ ++#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ ++#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ ++#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport ++ * over Ethernet ++ */ ++ ++/* ++ * Non DIX types. Won't clash for 1500 types. ++ */ ++ ++#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ ++#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ ++#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ ++#define ETH_P_802_2 0x0004 /* 802.2 frames */ ++#define ETH_P_SNAP 0x0005 /* Internal only */ ++#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ ++#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ ++#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ ++#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ ++#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ ++#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ ++#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ ++#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ ++#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ ++#define ETH_P_ECONET 0x0018 /* Acorn Econet */ ++ ++/* ++ * This is an Ethernet frame header. ++ */ ++ ++struct ethhdr ++{ ++ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ ++ unsigned char h_source[ETH_ALEN]; /* source ether addr */ ++ unsigned short h_proto; /* packet type ID field */ ++}; ++ ++struct _vlan { ++ unsigned short h_vlan_TCI; // Encapsulates priority and VLAN ID ++ unsigned short h_vlan_encapsulated_proto; ++}; ++ ++ ++ ++#define get_vlan_id(pvlan) ((ntohs((unsigned short )pvlan->h_vlan_TCI)) & 0xfff) ++#define get_vlan_priority(pvlan) ((ntohs((unsigned short )pvlan->h_vlan_TCI))>>13) ++#define get_vlan_encap_proto(pvlan) (ntohs((unsigned short )pvlan->h_vlan_encapsulated_proto)) ++ ++ ++#endif /* _LINUX_IF_ETHER_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h b/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h +new file mode 100644 +index 000000000000..b2b2e9711aa4 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h +@@ -0,0 +1,179 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __IOCTL_CFG80211_H__ ++#define __IOCTL_CFG80211_H__ ++ ++#if defined(CONFIG_IOCTL_CFG80211) && !defined(CONFIG_CFG80211) && !defined(CONFIG_CFG80211_MODULE) ++ #error "Can't define CONFIG_IOCTL_CFG80211 because neither CONFIG_CFG80211 nor CONFIG_CFG80211_MODULE is defined in kernel" ++#endif ++#if defined(CONFIG_IOCTL_CFG80211) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ++ #error "We haven't verify our cfg80211 solution below kernel version 2.6.35" ++#endif ++ ++#if defined(RTW_USE_CFG80211_STA_EVENT) ++ #undef CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER ++#endif ++ ++struct rtw_wdev_invit_info { ++ u8 state; /* 0: req, 1:rep */ ++ u8 peer_mac[ETH_ALEN]; ++ u8 active; ++ u8 token; ++ u8 flags; ++ u8 status; ++ u8 req_op_ch; ++ u8 rsp_op_ch; ++}; ++ ++#define rtw_wdev_invit_info_init(invit_info) \ ++ do { \ ++ (invit_info)->state = 0xff; \ ++ _rtw_memset((invit_info)->peer_mac, 0, ETH_ALEN); \ ++ (invit_info)->active = 0xff; \ ++ (invit_info)->token = 0; \ ++ (invit_info)->flags = 0x00; \ ++ (invit_info)->status = 0xff; \ ++ (invit_info)->req_op_ch = 0; \ ++ (invit_info)->rsp_op_ch = 0; \ ++ } while (0) ++ ++struct rtw_wdev_nego_info { ++ u8 state; /* 0: req, 1:rep, 3:conf */ ++ u8 peer_mac[ETH_ALEN]; ++ u8 active; ++ u8 token; ++ u8 status; ++ u8 req_intent; ++ u8 req_op_ch; ++ u8 req_listen_ch; ++ u8 rsp_intent; ++ u8 rsp_op_ch; ++ u8 conf_op_ch; ++}; ++ ++#define rtw_wdev_nego_info_init(nego_info) \ ++ do { \ ++ (nego_info)->state = 0xff; \ ++ _rtw_memset((nego_info)->peer_mac, 0, ETH_ALEN); \ ++ (nego_info)->active = 0xff; \ ++ (nego_info)->token = 0; \ ++ (nego_info)->status = 0xff; \ ++ (nego_info)->req_intent = 0xff; \ ++ (nego_info)->req_op_ch = 0; \ ++ (nego_info)->req_listen_ch = 0; \ ++ (nego_info)->rsp_intent = 0xff; \ ++ (nego_info)->rsp_op_ch = 0; \ ++ (nego_info)->conf_op_ch = 0; \ ++ } while (0) ++ ++struct rtw_wdev_priv ++{ ++ struct wireless_dev *rtw_wdev; ++ ++ _adapter *padapter; ++ ++ struct cfg80211_scan_request *scan_request; ++ _lock scan_req_lock; ++ ++ struct net_device *pmon_ndev;//for monitor interface ++ char ifname_mon[IFNAMSIZ + 1]; //interface name for monitor interface ++ ++ u8 p2p_enabled; ++ ++ u8 provdisc_req_issued; ++ ++ struct rtw_wdev_invit_info invit_info; ++ struct rtw_wdev_nego_info nego_info; ++ ++ u8 bandroid_scan; ++ bool block; ++ bool power_mgmt; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ATOMIC_T ro_ch_to; ++ ATOMIC_T switch_ch_to; ++#endif ++ ++}; ++ ++#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w))) ++ ++#define wiphy_to_adapter(x) (_adapter *)(((struct rtw_wdev_priv*)wiphy_priv(x))->padapter) ++ ++#define wiphy_to_wdev(x) (struct wireless_dev *)(((struct rtw_wdev_priv*)wiphy_priv(x))->rtw_wdev) ++ ++int rtw_wdev_alloc(_adapter *padapter, struct device *dev); ++void rtw_wdev_free(struct wireless_dev *wdev); ++void rtw_wdev_unregister(struct wireless_dev *wdev); ++ ++void rtw_cfg80211_init_wiphy(_adapter *padapter); ++ ++void rtw_cfg80211_surveydone_event_callback(_adapter *padapter); ++int rtw_cfg80211_check_bss(_adapter *padapter); ++void rtw_cfg80211_indicate_connect(_adapter *padapter); ++void rtw_cfg80211_indicate_disconnect(_adapter *padapter); ++void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, bool aborted); ++ ++#ifdef CONFIG_AP_MODE ++void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint frame_len); ++void rtw_cfg80211_indicate_sta_disassoc(_adapter *padapter, unsigned char *da, unsigned short reason); ++#endif //CONFIG_AP_MODE ++ ++void rtw_cfg80211_issue_p2p_provision_request(_adapter *padapter, const u8 *buf, size_t len); ++void rtw_cfg80211_rx_p2p_action_public(_adapter *padapter, u8 *pmgmt_frame, uint frame_len); ++void rtw_cfg80211_rx_action_p2p(_adapter *padapter, u8 *pmgmt_frame, uint frame_len); ++void rtw_cfg80211_rx_action(_adapter *adapter, u8 *frame, uint frame_len, const char*msg); ++ ++int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net, char *buf, int len, int type); ++ ++bool rtw_cfg80211_pwr_mgmt(_adapter *adapter); ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) && !defined(COMPAT_KERNEL_RELEASE) ++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, buf, len, gfp) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)) ++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, sig_dbm, buf, len, gfp) ++#else ++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->rtw_wdev, freq, sig_dbm, buf, len, gfp) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) && !defined(COMPAT_KERNEL_RELEASE) ++#define rtw_cfg80211_send_rx_assoc(adapter, bss, buf, len) cfg80211_send_rx_assoc((adapter)->pnetdev, buf, len) ++#else ++#define rtw_cfg80211_send_rx_assoc(adapter, bss, buf, len) cfg80211_send_rx_assoc((adapter)->pnetdev, bss, buf, len) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)) ++#define rtw_cfg80211_mgmt_tx_status(adapter, cookie, buf, len, ack, gfp) cfg80211_mgmt_tx_status((adapter)->pnetdev, cookie, buf, len, ack, gfp) ++#else ++#define rtw_cfg80211_mgmt_tx_status(adapter, cookie, buf, len, ack, gfp) cfg80211_mgmt_tx_status((adapter)->rtw_wdev, cookie, buf, len, ack, gfp) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)) ++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp) cfg80211_ready_on_channel((adapter)->pnetdev, cookie, chan, channel_type, duration, gfp) ++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->pnetdev, cookie, chan, chan_type, gfp) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp) cfg80211_ready_on_channel((adapter)->rtw_wdev, cookie, chan, channel_type, duration, gfp) ++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->rtw_wdev, cookie, chan, chan_type, gfp) ++#else ++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp) cfg80211_ready_on_channel((adapter)->rtw_wdev, cookie, chan, duration, gfp) ++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->rtw_wdev, cookie, chan, gfp) ++#endif ++ ++#endif //__IOCTL_CFG80211_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ip.h b/drivers/net/wireless/realtek/rtl8192cu/include/ip.h +new file mode 100644 +index 000000000000..2c3d2f350998 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ip.h +@@ -0,0 +1,141 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _LINUX_IP_H ++#define _LINUX_IP_H ++#include ++ ++/* SOL_IP socket options */ ++ ++#define IPTOS_TOS_MASK 0x1E ++#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK) ++#define IPTOS_LOWDELAY 0x10 ++#define IPTOS_THROUGHPUT 0x08 ++#define IPTOS_RELIABILITY 0x04 ++#define IPTOS_MINCOST 0x02 ++ ++#define IPTOS_PREC_MASK 0xE0 ++#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK) ++#define IPTOS_PREC_NETCONTROL 0xe0 ++#define IPTOS_PREC_INTERNETCONTROL 0xc0 ++#define IPTOS_PREC_CRITIC_ECP 0xa0 ++#define IPTOS_PREC_FLASHOVERRIDE 0x80 ++#define IPTOS_PREC_FLASH 0x60 ++#define IPTOS_PREC_IMMEDIATE 0x40 ++#define IPTOS_PREC_PRIORITY 0x20 ++#define IPTOS_PREC_ROUTINE 0x00 ++ ++ ++/* IP options */ ++#define IPOPT_COPY 0x80 ++#define IPOPT_CLASS_MASK 0x60 ++#define IPOPT_NUMBER_MASK 0x1f ++ ++#define IPOPT_COPIED(o) ((o)&IPOPT_COPY) ++#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK) ++#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK) ++ ++#define IPOPT_CONTROL 0x00 ++#define IPOPT_RESERVED1 0x20 ++#define IPOPT_MEASUREMENT 0x40 ++#define IPOPT_RESERVED2 0x60 ++ ++#define IPOPT_END (0 |IPOPT_CONTROL) ++#define IPOPT_NOOP (1 |IPOPT_CONTROL) ++#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY) ++#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY) ++#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT) ++#define IPOPT_RR (7 |IPOPT_CONTROL) ++#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY) ++#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY) ++#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY) ++ ++#define IPVERSION 4 ++#define MAXTTL 255 ++#define IPDEFTTL 64 ++ ++/* struct timestamp, struct route and MAX_ROUTES are removed. ++ ++ REASONS: it is clear that nobody used them because: ++ - MAX_ROUTES value was wrong. ++ - "struct route" was wrong. ++ - "struct timestamp" had fatally misaligned bitfields and was completely unusable. ++ */ ++ ++#define IPOPT_OPTVAL 0 ++#define IPOPT_OLEN 1 ++#define IPOPT_OFFSET 2 ++#define IPOPT_MINOFF 4 ++#define MAX_IPOPTLEN 40 ++#define IPOPT_NOP IPOPT_NOOP ++#define IPOPT_EOL IPOPT_END ++#define IPOPT_TS IPOPT_TIMESTAMP ++ ++#define IPOPT_TS_TSONLY 0 /* timestamps only */ ++#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ ++#define IPOPT_TS_PRESPEC 3 /* specified modules only */ ++ ++#ifdef PLATFORM_LINUX ++ ++struct ip_options { ++ __u32 faddr; /* Saved first hop address */ ++ unsigned char optlen; ++ unsigned char srr; ++ unsigned char rr; ++ unsigned char ts; ++ unsigned char is_setbyuser:1, /* Set by setsockopt? */ ++ is_data:1, /* Options in __data, rather than skb */ ++ is_strictroute:1, /* Strict source route */ ++ srr_is_hit:1, /* Packet destination addr was our one */ ++ is_changed:1, /* IP checksum more not valid */ ++ rr_needaddr:1, /* Need to record addr of outgoing dev */ ++ ts_needtime:1, /* Need to record timestamp */ ++ ts_needaddr:1; /* Need to record addr of outgoing dev */ ++ unsigned char router_alert; ++ unsigned char __pad1; ++ unsigned char __pad2; ++ unsigned char __data[0]; ++}; ++ ++#define optlength(opt) (sizeof(struct ip_options) + opt->optlen) ++#endif ++ ++struct iphdr { ++#if defined(__LITTLE_ENDIAN_BITFIELD) ++ __u8 ihl:4, ++ version:4; ++#elif defined (__BIG_ENDIAN_BITFIELD) ++ __u8 version:4, ++ ihl:4; ++#else ++#error "Please fix " ++#endif ++ __u8 tos; ++ __u16 tot_len; ++ __u16 id; ++ __u16 frag_off; ++ __u8 ttl; ++ __u8 protocol; ++ __u16 check; ++ __u32 saddr; ++ __u32 daddr; ++ /*The options start here. */ ++}; ++ ++#endif /* _LINUX_IP_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/linux/wireless.h b/drivers/net/wireless/realtek/rtl8192cu/include/linux/wireless.h +new file mode 100644 +index 000000000000..036fc3275f58 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/linux/wireless.h +@@ -0,0 +1,90 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef _LINUX_WIRELESS_H ++#define _LINUX_WIRELESS_H ++ ++/***************************** INCLUDES *****************************/ ++ ++#if 0 ++#include /* for __u* and __s* typedefs */ ++#include /* for "struct sockaddr" et al */ ++#include /* for IFNAMSIZ and co... */ ++#else ++#define __user ++//typedef uint16_t __u16; ++#include /* for "struct sockaddr" et al */ ++#include /* for IFNAMSIZ and co... */ ++#endif ++ ++/****************************** TYPES ******************************/ ++ ++/* --------------------------- SUBTYPES --------------------------- */ ++/* ++ * For all data larger than 16 octets, we need to use a ++ * pointer to memory allocated in user space. ++ */ ++struct iw_point ++{ ++ void __user *pointer; /* Pointer to the data (in user space) */ ++ __u16 length; /* number of fields or size in bytes */ ++ __u16 flags; /* Optional params */ ++}; ++ ++ ++/* ------------------------ IOCTL REQUEST ------------------------ */ ++/* ++ * This structure defines the payload of an ioctl, and is used ++ * below. ++ * ++ * Note that this structure should fit on the memory footprint ++ * of iwreq (which is the same as ifreq), which mean a max size of ++ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... ++ * You should check this when increasing the structures defined ++ * above in this file... ++ */ ++union iwreq_data ++{ ++ /* Config - generic */ ++ char name[IFNAMSIZ]; ++ /* Name : used to verify the presence of wireless extensions. ++ * Name of the protocol/provider... */ ++ ++ struct iw_point data; /* Other large parameters */ ++}; ++ ++/* ++ * The structure to exchange data for ioctl. ++ * This structure is the same as 'struct ifreq', but (re)defined for ++ * convenience... ++ * Do I need to remind you about structure size (32 octets) ? ++ */ ++struct iwreq ++{ ++ union ++ { ++ char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ ++ } ifr_ifrn; ++ ++ /* Data part (defined just above) */ ++ union iwreq_data u; ++}; ++ ++#endif /* _LINUX_WIRELESS_H */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/mlme_osdep.h b/drivers/net/wireless/realtek/rtl8192cu/include/mlme_osdep.h +new file mode 100644 +index 000000000000..383fc386f803 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/mlme_osdep.h +@@ -0,0 +1,39 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __MLME_OSDEP_H_ ++#define __MLME_OSDEP_H_ ++ ++#include ++#include ++#include ++ ++#if defined(PLATFORM_WINDOWS) || defined(PLATFORM_MPIXEL) ++extern int time_after(u32 now, u32 old); ++#endif ++ ++extern void rtw_init_mlme_timer(_adapter *padapter); ++extern void rtw_os_indicate_disconnect( _adapter *adapter ); ++extern void rtw_os_indicate_connect( _adapter *adapter ); ++void rtw_os_indicate_scan_done( _adapter *padapter, bool aborted); ++extern void rtw_report_sec_ie(_adapter *adapter,u8 authmode,u8 *sec_ie); ++ ++void rtw_reset_securitypriv( _adapter *adapter ); ++ ++#endif //_MLME_OSDEP_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/mp_custom_oid.h b/drivers/net/wireless/realtek/rtl8192cu/include/mp_custom_oid.h +new file mode 100644 +index 000000000000..9c9c69b7183d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/mp_custom_oid.h +@@ -0,0 +1,353 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __CUSTOM_OID_H ++#define __CUSTOM_OID_H ++ ++// by Owen ++// 0xFF818000 - 0xFF81802F RTL8180 Mass Production Kit ++// 0xFF818500 - 0xFF81850F RTL8185 Setup Utility ++// 0xFF818580 - 0xFF81858F RTL8185 Phy Status Utility ++ ++// ++ ++// by Owen for Production Kit ++// For Production Kit with Agilent Equipments ++// in order to make our custom oids hopefully somewhat unique ++// we will use 0xFF (indicating implementation specific OID) ++// 81(first byte of non zero Realtek unique identifier) ++// 80 (second byte of non zero Realtek unique identifier) ++// XX (the custom OID number - providing 255 possible custom oids) ++ ++#define OID_RT_PRO_RESET_DUT 0xFF818000 ++#define OID_RT_PRO_SET_DATA_RATE 0xFF818001 ++#define OID_RT_PRO_START_TEST 0xFF818002 ++#define OID_RT_PRO_STOP_TEST 0xFF818003 ++#define OID_RT_PRO_SET_PREAMBLE 0xFF818004 ++#define OID_RT_PRO_SET_SCRAMBLER 0xFF818005 ++#define OID_RT_PRO_SET_FILTER_BB 0xFF818006 ++#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB 0xFF818007 ++#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL 0xFF818008 ++#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL 0xFF818009 ++#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL 0xFF81800A ++ ++#define OID_RT_PRO_SET_TX_ANTENNA_BB 0xFF81800D ++#define OID_RT_PRO_SET_ANTENNA_BB 0xFF81800E ++#define OID_RT_PRO_SET_CR_SCRAMBLER 0xFF81800F ++#define OID_RT_PRO_SET_CR_NEW_FILTER 0xFF818010 ++#define OID_RT_PRO_SET_TX_POWER_CONTROL 0xFF818011 ++#define OID_RT_PRO_SET_CR_TX_CONFIG 0xFF818012 ++#define OID_RT_PRO_GET_TX_POWER_CONTROL 0xFF818013 ++#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY 0xFF818014 ++#define OID_RT_PRO_SET_CR_SETPOINT 0xFF818015 ++#define OID_RT_PRO_SET_INTEGRATOR 0xFF818016 ++#define OID_RT_PRO_SET_SIGNAL_QUALITY 0xFF818017 ++#define OID_RT_PRO_GET_INTEGRATOR 0xFF818018 ++#define OID_RT_PRO_GET_SIGNAL_QUALITY 0xFF818019 ++#define OID_RT_PRO_QUERY_EEPROM_TYPE 0xFF81801A ++#define OID_RT_PRO_WRITE_MAC_ADDRESS 0xFF81801B ++#define OID_RT_PRO_READ_MAC_ADDRESS 0xFF81801C ++#define OID_RT_PRO_WRITE_CIS_DATA 0xFF81801D ++#define OID_RT_PRO_READ_CIS_DATA 0xFF81801E ++#define OID_RT_PRO_WRITE_POWER_CONTROL 0xFF81801F ++#define OID_RT_PRO_READ_POWER_CONTROL 0xFF818020 ++#define OID_RT_PRO_WRITE_EEPROM 0xFF818021 ++#define OID_RT_PRO_READ_EEPROM 0xFF818022 ++#define OID_RT_PRO_RESET_TX_PACKET_SENT 0xFF818023 ++#define OID_RT_PRO_QUERY_TX_PACKET_SENT 0xFF818024 ++#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED 0xFF818025 ++#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED 0xFF818026 ++#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR 0xFF818027 ++#define OID_RT_PRO_QUERY_CURRENT_ADDRESS 0xFF818028 ++#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS 0xFF818029 ++#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS 0xFF81802A ++#define OID_RT_PRO_RECEIVE_PACKET 0xFF81802C ++// added by Owen on 04/08/03 for Cameo's request ++#define OID_RT_PRO_WRITE_EEPROM_BYTE 0xFF81802D ++#define OID_RT_PRO_READ_EEPROM_BYTE 0xFF81802E ++#define OID_RT_PRO_SET_MODULATION 0xFF81802F ++// ++ ++//Sean ++#define OID_RT_DRIVER_OPTION 0xFF818080 ++#define OID_RT_RF_OFF 0xFF818081 ++#define OID_RT_AUTH_STATUS 0xFF818082 ++ ++//======================================================================== ++#define OID_RT_PRO_SET_CONTINUOUS_TX 0xFF81800B ++#define OID_RT_PRO_SET_SINGLE_CARRIER_TX 0xFF81800C ++#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX 0xFF81802B ++#define OID_RT_PRO_SET_SINGLE_TONE_TX 0xFF818043 ++//======================================================================== ++ ++ ++// by Owen for RTL8185 Phy Status Report Utility ++#define OID_RT_UTILITY_FALSE_ALARM_COUNTERS 0xFF818580 ++#define OID_RT_UTILITY_SELECT_DEBUG_MODE 0xFF818581 ++#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER 0xFF818582 ++#define OID_RT_UTILITY_GET_RSSI_STATUS 0xFF818583 ++#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS 0xFF818584 ++#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS 0xFF818585 ++#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS 0xFF818586 ++// ++ ++// by Owen on 03/09/19-03/09/22 for RTL8185 ++#define OID_RT_WIRELESS_MODE 0xFF818500 ++#define OID_RT_SUPPORTED_RATES 0xFF818501 ++#define OID_RT_DESIRED_RATES 0xFF818502 ++#define OID_RT_WIRELESS_MODE_STARTING_ADHOC 0xFF818503 ++// ++ ++#define OID_RT_GET_CONNECT_STATE 0xFF030001 ++#define OID_RT_RESCAN 0xFF030002 ++#define OID_RT_SET_KEY_LENGTH 0xFF030003 ++#define OID_RT_SET_DEFAULT_KEY_ID 0xFF030004 ++ ++#define OID_RT_SET_CHANNEL 0xFF010182 ++#define OID_RT_SET_SNIFFER_MODE 0xFF010183 ++#define OID_RT_GET_SIGNAL_QUALITY 0xFF010184 ++#define OID_RT_GET_SMALL_PACKET_CRC 0xFF010185 ++#define OID_RT_GET_MIDDLE_PACKET_CRC 0xFF010186 ++#define OID_RT_GET_LARGE_PACKET_CRC 0xFF010187 ++#define OID_RT_GET_TX_RETRY 0xFF010188 ++#define OID_RT_GET_RX_RETRY 0xFF010189 ++#define OID_RT_PRO_SET_FW_DIG_STATE 0xFF01018A//S ++#define OID_RT_PRO_SET_FW_RA_STATE 0xFF01018B//S ++ ++#define OID_RT_GET_RX_TOTAL_PACKET 0xFF010190 ++#define OID_RT_GET_TX_BEACON_OK 0xFF010191 ++#define OID_RT_GET_TX_BEACON_ERR 0xFF010192 ++#define OID_RT_GET_RX_ICV_ERR 0xFF010193 ++#define OID_RT_SET_ENCRYPTION_ALGORITHM 0xFF010194 ++#define OID_RT_SET_NO_AUTO_RESCAN 0xFF010195 ++#define OID_RT_GET_PREAMBLE_MODE 0xFF010196 ++#define OID_RT_GET_DRIVER_UP_DELTA_TIME 0xFF010197 ++#define OID_RT_GET_AP_IP 0xFF010198 ++#define OID_RT_GET_CHANNELPLAN 0xFF010199 ++#define OID_RT_SET_PREAMBLE_MODE 0xFF01019A ++#define OID_RT_SET_BCN_INTVL 0xFF01019B ++#define OID_RT_GET_RF_VENDER 0xFF01019C ++#define OID_RT_DEDICATE_PROBE 0xFF01019D ++#define OID_RT_PRO_RX_FILTER_PATTERN 0xFF01019E ++ ++#define OID_RT_GET_DCST_CURRENT_THRESHOLD 0xFF01019F ++ ++#define OID_RT_GET_CCA_ERR 0xFF0101A0 ++#define OID_RT_GET_CCA_UPGRADE_THRESHOLD 0xFF0101A1 ++#define OID_RT_GET_CCA_FALLBACK_THRESHOLD 0xFF0101A2 ++ ++#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES 0xFF0101A3 ++#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES 0xFF0101A4 ++ ++// by Owen on 03/31/03 for Cameo's request ++#define OID_RT_SET_RATE_ADAPTIVE 0xFF0101A5 ++// ++#define OID_RT_GET_DCST_EVALUATE_PERIOD 0xFF0101A5 ++#define OID_RT_GET_DCST_TIME_UNIT_INDEX 0xFF0101A6 ++#define OID_RT_GET_TOTAL_TX_BYTES 0xFF0101A7 ++#define OID_RT_GET_TOTAL_RX_BYTES 0xFF0101A8 ++#define OID_RT_CURRENT_TX_POWER_LEVEL 0xFF0101A9 ++#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT 0xFF0101AA ++#define OID_RT_GET_ENC_KEY_MATCH_COUNT 0xFF0101AB ++#define OID_RT_GET_CHANNEL 0xFF0101AC ++ ++#define OID_RT_SET_CHANNELPLAN 0xFF0101AD ++#define OID_RT_GET_HARDWARE_RADIO_OFF 0xFF0101AE ++#define OID_RT_CHANNELPLAN_BY_COUNTRY 0xFF0101AF ++#define OID_RT_SCAN_AVAILABLE_BSSID 0xFF0101B0 ++#define OID_RT_GET_HARDWARE_VERSION 0xFF0101B1 ++#define OID_RT_GET_IS_ROAMING 0xFF0101B2 ++#define OID_RT_GET_IS_PRIVACY 0xFF0101B3 ++#define OID_RT_GET_KEY_MISMATCH 0xFF0101B4 ++#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH 0xFF0101B5 ++#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH 0xFF0101B6 ++#define OID_RT_RESET_LOG 0xFF0101B7 ++#define OID_RT_GET_LOG 0xFF0101B8 ++#define OID_RT_SET_INDICATE_HIDDEN_AP 0xFF0101B9 ++#define OID_RT_GET_HEADER_FAIL 0xFF0101BA ++#define OID_RT_SUPPORTED_WIRELESS_MODE 0xFF0101BB ++#define OID_RT_GET_CHANNEL_LIST 0xFF0101BC ++#define OID_RT_GET_SCAN_IN_PROGRESS 0xFF0101BD ++#define OID_RT_GET_TX_INFO 0xFF0101BE ++#define OID_RT_RF_READ_WRITE_OFFSET 0xFF0101BF ++#define OID_RT_RF_READ_WRITE 0xFF0101C0 ++ ++// For Netgear request. 2005.01.13, by rcnjko. ++#define OID_RT_FORCED_DATA_RATE 0xFF0101C1 ++#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST 0xFF0101C2 ++// For Netgear request. 2005.02.17, by rcnjko. ++#define OID_RT_GET_BSS_WIRELESS_MODE 0xFF0101C3 ++// For AZ project. 2005.06.27, by rcnjko. ++#define OID_RT_SCAN_WITH_MAGIC_PACKET 0xFF0101C4 ++ ++// Vincent 8185MP ++#define OID_RT_PRO_RX_FILTER 0xFF0111C0 ++ ++//Andy TEST ++//#define OID_RT_PRO_WRITE_REGISTRY 0xFF0111C1 ++//#define OID_RT_PRO_READ_REGISTRY 0xFF0111C2 ++#define OID_CE_USB_WRITE_REGISTRY 0xFF0111C1 ++#define OID_CE_USB_READ_REGISTRY 0xFF0111C2 ++ ++ ++#define OID_RT_PRO_SET_INITIAL_GAIN 0xFF0111C3 ++#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE 0xFF0111C4 ++#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE 0xFF0111C5 ++#define OID_RT_PRO_SET_TX_CHARGE_PUMP 0xFF0111C6 ++#define OID_RT_PRO_SET_RX_CHARGE_PUMP 0xFF0111C7 ++#define OID_RT_PRO_RF_WRITE_REGISTRY 0xFF0111C8 ++#define OID_RT_PRO_RF_READ_REGISTRY 0xFF0111C9 ++#define OID_RT_PRO_QUERY_RF_TYPE 0xFF0111CA ++ ++// AP OID ++#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST 0xFF010300 ++#define OID_RT_AP_GET_CURRENT_TIME_STAMP 0xFF010301 ++#define OID_RT_AP_SWITCH_INTO_AP_MODE 0xFF010302 ++#define OID_RT_AP_SET_DTIM_PERIOD 0xFF010303 ++#define OID_RT_AP_SUPPORTED 0xFF010304 // Determine if driver supports AP mode. 2004.08.27, by rcnjko. ++#define OID_RT_AP_SET_PASSPHRASE 0xFF010305 // Set WPA-PSK passphrase into authenticator. 2005.07.08, byrcnjko. ++ ++// 8187MP. 2004.09.06, by rcnjko. ++#define OID_RT_PRO8187_WI_POLL 0xFF818780 ++#define OID_RT_PRO_WRITE_BB_REG 0xFF818781 ++#define OID_RT_PRO_READ_BB_REG 0xFF818782 ++#define OID_RT_PRO_WRITE_RF_REG 0xFF818783 ++#define OID_RT_PRO_READ_RF_REG 0xFF818784 ++ ++// Meeting House. added by Annie, 2005-07-20. ++#define OID_RT_MH_VENDER_ID 0xFFEDC100 ++ ++//8711 MP OID added 20051230. ++#define OID_RT_PRO8711_JOIN_BSS 0xFF871100//S ++ ++#define OID_RT_PRO_READ_REGISTER 0xFF871101 //Q ++#define OID_RT_PRO_WRITE_REGISTER 0xFF871102 //S ++ ++#define OID_RT_PRO_BURST_READ_REGISTER 0xFF871103 //Q ++#define OID_RT_PRO_BURST_WRITE_REGISTER 0xFF871104 //S ++ ++#define OID_RT_PRO_WRITE_TXCMD 0xFF871105 //S ++ ++#define OID_RT_PRO_READ16_EEPROM 0xFF871106 //Q ++#define OID_RT_PRO_WRITE16_EEPROM 0xFF871107 //S ++ ++#define OID_RT_PRO_H2C_SET_COMMAND 0xFF871108 //S ++#define OID_RT_PRO_H2C_QUERY_RESULT 0xFF871109 //Q ++ ++#define OID_RT_PRO8711_WI_POLL 0xFF87110A //Q ++#define OID_RT_PRO8711_PKT_LOSS 0xFF87110B //Q ++#define OID_RT_RD_ATTRIB_MEM 0xFF87110C//Q ++#define OID_RT_WR_ATTRIB_MEM 0xFF87110D//S ++ ++ ++//Method 2 for H2C/C2H ++#define OID_RT_PRO_H2C_CMD_MODE 0xFF871110 //S ++#define OID_RT_PRO_H2C_CMD_RSP_MODE 0xFF871111 //Q ++#define OID_RT_PRO_H2C_CMD_EVENT_MODE 0xFF871112 //S ++#define OID_RT_PRO_WAIT_C2H_EVENT 0xFF871113 //Q ++#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST 0xFF871114//Q ++ ++#define OID_RT_PRO_SCSI_ACCESS_TEST 0xFF871115 //Q, S ++ ++#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT 0xFF871116 //S ++#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN 0xFF871117 //Q,S ++#define OID_RT_RRO_RX_PKT_VIA_IOCTRL 0xFF871118 //Q ++#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL 0xFF871119 //Q ++ ++#define OID_RT_RPO_SET_PWRMGT_TEST 0xFF87111A //S ++#define OID_RT_PRO_QRY_PWRMGT_TEST 0XFF87111B //Q ++#define OID_RT_RPO_ASYNC_RWIO_TEST 0xFF87111C //S ++#define OID_RT_RPO_ASYNC_RWIO_POLL 0xFF87111D //Q ++#define OID_RT_PRO_SET_RF_INTFS 0xFF87111E //S ++#define OID_RT_POLL_RX_STATUS 0xFF87111F //Q ++ ++#define OID_RT_PRO_CFG_DEBUG_MESSAGE 0xFF871120 //Q,S ++#define OID_RT_PRO_SET_DATA_RATE_EX 0xFF871121//S ++#define OID_RT_PRO_SET_BASIC_RATE 0xFF871122//S ++#define OID_RT_PRO_READ_TSSI 0xFF871123//S ++#define OID_RT_PRO_SET_POWER_TRACKING 0xFF871124//S ++ ++ ++#define OID_RT_PRO_QRY_PWRSTATE 0xFF871150 //Q ++#define OID_RT_PRO_SET_PWRSTATE 0xFF871151 //S ++ ++//Method 2 , using workitem ++#define OID_RT_SET_READ_REG 0xFF871181 //S ++#define OID_RT_SET_WRITE_REG 0xFF871182 //S ++#define OID_RT_SET_BURST_READ_REG 0xFF871183 //S ++#define OID_RT_SET_BURST_WRITE_REG 0xFF871184 //S ++#define OID_RT_SET_WRITE_TXCMD 0xFF871185 //S ++#define OID_RT_SET_READ16_EEPROM 0xFF871186 //S ++#define OID_RT_SET_WRITE16_EEPROM 0xFF871187 //S ++#define OID_RT_QRY_POLL_WKITEM 0xFF871188 //Q ++ ++//For SDIO INTERFACE only ++#define OID_RT_PRO_SYNCPAGERW_SRAM 0xFF8711A0 //Q, S ++#define OID_RT_PRO_871X_DRV_EXT 0xFF8711A1 ++ ++//For USB INTERFACE only ++#define OID_RT_PRO_USB_VENDOR_REQ 0xFF8711B0 //Q, S ++#define OID_RT_PRO_SCSI_AUTO_TEST 0xFF8711B1 //S ++#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE 0xFF8711B2 //S ++#define OID_RT_PRO_USB_MAC_RX_FIFO_READ 0xFF8711B3 //Q ++#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING 0xFF8711B4 //Q ++ ++#define OID_RT_PRO_H2C_SET_RATE_TABLE 0xFF8711FB //S ++#define OID_RT_PRO_H2C_GET_RATE_TABLE 0xFF8711FC //S ++#define OID_RT_PRO_H2C_C2H_LBK_TEST 0xFF8711FE ++ ++#define OID_RT_PRO_ENCRYPTION_CTRL 0xFF871200 //Q, S ++#define OID_RT_PRO_ADD_STA_INFO 0xFF871201 //S ++#define OID_RT_PRO_DELE_STA_INFO 0xFF871202 //S ++#define OID_RT_PRO_QUERY_DR_VARIABLE 0xFF871203 //Q ++ ++#define OID_RT_PRO_RX_PACKET_TYPE 0xFF871204 //Q, S ++ ++#define OID_RT_PRO_READ_EFUSE 0xFF871205 //Q ++#define OID_RT_PRO_WRITE_EFUSE 0xFF871206 //S ++#define OID_RT_PRO_RW_EFUSE_PGPKT 0xFF871207 //Q, S ++#define OID_RT_GET_EFUSE_CURRENT_SIZE 0xFF871208 //Q ++ ++#define OID_RT_SET_BANDWIDTH 0xFF871209 //S ++#define OID_RT_SET_CRYSTAL_CAP 0xFF87120A //S ++ ++#define OID_RT_SET_RX_PACKET_TYPE 0xFF87120B //S ++ ++#define OID_RT_GET_EFUSE_MAX_SIZE 0xFF87120C //Q ++ ++#define OID_RT_PRO_SET_TX_AGC_OFFSET 0xFF87120D //S ++ ++#define OID_RT_PRO_SET_PKT_TEST_MODE 0xFF87120E //S ++ ++#define OID_RT_PRO_FOR_EVM_TEST_SETTING 0xFF87120F //S ++ ++#define OID_RT_PRO_GET_THERMAL_METER 0xFF871210 //Q ++ ++#define OID_RT_RESET_PHY_RX_PACKET_COUNT 0xFF871211 //S ++#define OID_RT_GET_PHY_RX_PACKET_RECEIVED 0xFF871212 //Q ++#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR 0xFF871213 //Q ++ ++#define OID_RT_SET_POWER_DOWN 0xFF871214 //S ++ ++#define OID_RT_GET_POWER_MODE 0xFF871215 //Q ++ ++#define OID_RT_PRO_EFUSE 0xFF871216 //Q, S ++#define OID_RT_PRO_EFUSE_MAP 0xFF871217 //Q, S ++ ++#endif //#ifndef __CUSTOM_OID_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/nic_spec.h b/drivers/net/wireless/realtek/rtl8192cu/include/nic_spec.h +new file mode 100644 +index 000000000000..fba5e564f07e +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/nic_spec.h +@@ -0,0 +1,46 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ ++#ifndef __NIC_SPEC_H__ ++#define __NIC_SPEC_H__ ++ ++#include ++ ++#define RTL8711_MCTRL_ (0x20000) ++#define RTL8711_UART_ (0x30000) ++#define RTL8711_TIMER_ (0x40000) ++#define RTL8711_FINT_ (0x50000) ++#define RTL8711_HINT_ (0x50000) ++#define RTL8711_GPIO_ (0x60000) ++#define RTL8711_WLANCTRL_ (0x200000) ++#define RTL8711_WLANFF_ (0xe00000) ++#define RTL8711_HCICTRL_ (0x600000) ++#define RTL8711_SYSCFG_ (0x620000) ++#define RTL8711_SYSCTRL_ (0x620000) ++#define RTL8711_MCCTRL_ (0x020000) ++ ++ ++#include ++ ++#include ++ ++ ++#endif // __RTL8711_SPEC_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/osdep_ce_service.h b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_ce_service.h +new file mode 100644 +index 000000000000..4b4def05c149 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_ce_service.h +@@ -0,0 +1,170 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef __OSDEP_CE_SERVICE_H_ ++#define __OSDEP_CE_SERVICE_H_ ++ ++ ++#include ++#include ++ ++#ifdef CONFIG_SDIO_HCI ++#include "SDCardDDK.h" ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++typedef HANDLE _sema; ++typedef LIST_ENTRY _list; ++typedef NDIS_STATUS _OS_STATUS; ++ ++typedef NDIS_SPIN_LOCK _lock; ++ ++typedef HANDLE _rwlock; //Mutex ++ ++typedef u32 _irqL; ++ ++typedef NDIS_HANDLE _nic_hdl; ++ ++ ++typedef NDIS_MINIPORT_TIMER _timer; ++ ++struct __queue { ++ LIST_ENTRY queue; ++ _lock lock; ++}; ++ ++typedef NDIS_PACKET _pkt; ++typedef NDIS_BUFFER _buffer; ++typedef struct __queue _queue; ++ ++typedef HANDLE _thread_hdl_; ++typedef DWORD thread_return; ++typedef void* thread_context; ++typedef NDIS_WORK_ITEM _workitem; ++ ++#define thread_exit() ExitThread(STATUS_SUCCESS); return 0; ++ ++ ++#define SEMA_UPBND (0x7FFFFFFF) //8192 ++ ++__inline static _list *get_prev(_list *list) ++{ ++ return list->Blink; ++} ++ ++__inline static _list *get_next(_list *list) ++{ ++ return list->Flink; ++} ++ ++__inline static _list *get_list_head(_queue *queue) ++{ ++ return (&(queue->queue)); ++} ++ ++#define LIST_CONTAINOR(ptr, type, member) CONTAINING_RECORD(ptr, type, member) ++ ++__inline static void _enter_critical(_lock *plock, _irqL *pirqL) ++{ ++ NdisAcquireSpinLock(plock); ++} ++ ++__inline static void _exit_critical(_lock *plock, _irqL *pirqL) ++{ ++ NdisReleaseSpinLock(plock); ++} ++ ++__inline static _enter_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprAcquireSpinLock(plock); ++} ++ ++__inline static _exit_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprReleaseSpinLock(plock); ++} ++ ++ ++__inline static void _enter_hwio_critical(_rwlock *prwlock, _irqL *pirqL) ++{ ++ WaitForSingleObject(*prwlock, INFINITE ); ++ ++} ++ ++__inline static void _exit_hwio_critical(_rwlock *prwlock, _irqL *pirqL) ++{ ++ ReleaseMutex(*prwlock); ++} ++ ++__inline static void rtw_list_delete(_list *plist) ++{ ++ RemoveEntryList(plist); ++ InitializeListHead(plist); ++} ++ ++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,PVOID cntx) ++{ ++ NdisMInitializeTimer(ptimer, nic_hdl, pfunc, cntx); ++} ++ ++__inline static void _set_timer(_timer *ptimer,u32 delay_time) ++{ ++ NdisMSetTimer(ptimer,delay_time); ++} ++ ++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled) ++{ ++ NdisMCancelTimer(ptimer,bcancelled); ++} ++ ++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx) ++{ ++ ++ NdisInitializeWorkItem(pwork, pfunc, cntx); ++} ++ ++__inline static void _set_workitem(_workitem *pwork) ++{ ++ NdisScheduleWorkItem(pwork); ++} ++ ++#define ATOMIC_INIT(i) { (i) } ++ ++// ++// Global Mutex: can only be used at PASSIVE level. ++// ++ ++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ while (NdisInterlockedIncrement((PULONG)&(_MutexCounter)) != 1)\ ++ { \ ++ NdisInterlockedDecrement((PULONG)&(_MutexCounter)); \ ++ NdisMSleep(10000); \ ++ } \ ++} ++ ++#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ NdisInterlockedDecrement((PULONG)&(_MutexCounter)); \ ++} ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/osdep_intf.h b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_intf.h +new file mode 100644 +index 000000000000..10e5e4a1caf6 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_intf.h +@@ -0,0 +1,154 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef __OSDEP_INTF_H_ ++#define __OSDEP_INTF_H_ ++ ++#include ++#include ++#include ++ ++struct intf_priv { ++ ++ u8 *intf_dev; ++ u32 max_iosz; //USB2.0: 128, USB1.1: 64, SDIO:64 ++ u32 max_xmitsz; //USB2.0: unlimited, SDIO:512 ++ u32 max_recvsz; //USB2.0: unlimited, SDIO:512 ++ ++ volatile u8 *io_rwmem; ++ volatile u8 *allocated_io_rwmem; ++ u32 io_wsz; //unit: 4bytes ++ u32 io_rsz;//unit: 4bytes ++ u8 intf_status; ++ ++ void (*_bus_io)(u8 *priv); ++ ++/* ++Under Sync. IRP (SDIO/USB) ++A protection mechanism is necessary for the io_rwmem(read/write protocol) ++ ++Under Async. IRP (SDIO/USB) ++The protection mechanism is through the pending queue. ++*/ ++ ++ _mutex ioctl_mutex; ++ ++ ++#ifdef PLATFORM_LINUX ++ #ifdef CONFIG_USB_HCI ++ // when in USB, IO is through interrupt in/out endpoints ++ struct usb_device *udev; ++ PURB piorw_urb; ++ u8 io_irp_cnt; ++ u8 bio_irp_pending; ++ _sema io_retevt; ++ _timer io_timer; ++ u8 bio_irp_timeout; ++ u8 bio_timer_cancel; ++ #endif ++#endif ++ ++#ifdef PLATFORM_OS_XP ++ #ifdef CONFIG_SDIO_HCI ++ // below is for io_rwmem... ++ PMDL pmdl; ++ PSDBUS_REQUEST_PACKET sdrp; ++ PSDBUS_REQUEST_PACKET recv_sdrp; ++ PSDBUS_REQUEST_PACKET xmit_sdrp; ++ ++ PIRP piorw_irp; ++ ++ #endif ++ #ifdef CONFIG_USB_HCI ++ PURB piorw_urb; ++ PIRP piorw_irp; ++ u8 io_irp_cnt; ++ u8 bio_irp_pending; ++ _sema io_retevt; ++ #endif ++#endif ++ ++}; ++ ++ ++#ifdef CONFIG_R871X_TEST ++int rtw_start_pseudo_adhoc(_adapter *padapter); ++int rtw_stop_pseudo_adhoc(_adapter *padapter); ++#endif ++ ++struct dvobj_priv *devobj_init(void); ++void devobj_deinit(struct dvobj_priv *pdvobj); ++ ++u8 rtw_init_drv_sw(_adapter *padapter); ++u8 rtw_free_drv_sw(_adapter *padapter); ++u8 rtw_reset_drv_sw(_adapter *padapter); ++ ++u32 rtw_start_drv_threads(_adapter *padapter); ++void rtw_stop_drv_threads (_adapter *padapter); ++void rtw_cancel_all_timer(_adapter *padapter); ++ ++#ifdef PLATFORM_LINUX ++int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); ++ ++int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname); ++struct net_device *rtw_init_netdev(_adapter *padapter); ++void rtw_unregister_netdevs(struct dvobj_priv *dvobj); ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++u16 rtw_recv_select_queue(struct sk_buff *skb); ++#endif //LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35) ++ ++#ifdef CONFIG_PROC_DEBUG ++void rtw_proc_init_one(struct net_device *dev); ++void rtw_proc_remove_one(struct net_device *dev); ++#else //!CONFIG_PROC_DEBUG ++static void rtw_proc_init_one(struct net_device *dev){} ++static void rtw_proc_remove_one(struct net_device *dev){} ++#endif //!CONFIG_PROC_DEBUG ++#endif //PLATFORM_LINUX ++ ++ ++#ifdef PLATFORM_FREEBSD ++extern int rtw_ioctl(struct ifnet * ifp, u_long cmd, caddr_t data); ++#endif ++ ++void rtw_ips_dev_unload(_adapter *padapter); ++#ifdef CONFIG_IPS ++int rtw_ips_pwr_up(_adapter *padapter); ++void rtw_ips_pwr_down(_adapter *padapter); ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++struct _io_ops; ++_adapter *rtw_drv_if2_init(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops)); ++void rtw_drv_if2_free(_adapter *if2); ++void rtw_drv_if2_stop(_adapter *if2); ++#ifdef CONFIG_MULTI_VIR_IFACES ++struct dvobj_priv; ++_adapter *rtw_drv_add_vir_if(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops)); ++void rtw_drv_stop_vir_ifaces(struct dvobj_priv *dvobj); ++void rtw_drv_free_vir_ifaces(struct dvobj_priv *dvobj); ++#endif //CONFIG_MULTI_VIR_IFACES ++#endif ++ ++int rtw_drv_register_netdev(_adapter *padapter); ++void rtw_ndev_destructor(_nic_hdl ndev); ++ ++#endif //_OSDEP_INTF_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h +new file mode 100644 +index 000000000000..f1511aadd9b7 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h +@@ -0,0 +1,1813 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __OSDEP_SERVICE_H_ ++#define __OSDEP_SERVICE_H_ ++ ++#include ++#include ++//#include ++ ++#define _FAIL 0 ++#define _SUCCESS 1 ++#define RTW_RX_HANDLED 2 ++//#define RTW_STATUS_TIMEDOUT -110 ++ ++#undef _TRUE ++#define _TRUE 1 ++ ++#undef _FALSE ++#define _FALSE 0 ++ ++ ++#ifdef PLATFORM_FREEBSD ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "usbdevs.h" ++ ++#define USB_DEBUG_VAR rum_debug ++#include ++ ++#if 1 //Baron porting from linux, it's all temp solution, needs to check again ++#include ++#include /* XXX for PCPU_GET */ ++// typedef struct semaphore _sema; ++ typedef struct sema _sema; ++// typedef spinlock_t _lock; ++ typedef struct mtx _lock; ++ typedef struct mtx _mutex; ++ typedef struct timer_list _timer; ++ struct list_head { ++ struct list_head *next, *prev; ++ }; ++ struct __queue { ++ struct list_head queue; ++ _lock lock; ++ }; ++ ++ //typedef struct sk_buff _pkt; ++ typedef struct mbuf _pkt; ++ typedef struct mbuf _buffer; ++ ++ typedef struct __queue _queue; ++ typedef struct list_head _list; ++ typedef int _OS_STATUS; ++ //typedef u32 _irqL; ++ typedef unsigned long _irqL; ++ typedef struct ifnet * _nic_hdl; ++ ++ typedef pid_t _thread_hdl_; ++// typedef struct thread _thread_hdl_; ++ typedef void thread_return; ++ typedef void* thread_context; ++ ++ //#define thread_exit() complete_and_exit(NULL, 0) ++ ++ typedef void timer_hdl_return; ++ typedef void* timer_hdl_context; ++ typedef struct work_struct _workitem; ++ ++#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) ++/* emulate a modern version */ ++#define LINUX_VERSION_CODE KERNEL_VERSION(2, 6, 35) ++ ++#define WIRELESS_EXT -1 ++#define HZ hz ++#define spin_lock_irqsave mtx_lock_irqsave ++#define spin_lock_bh mtx_lock_irqsave ++#define mtx_lock_irqsave(lock, x) mtx_lock(lock)//{local_irq_save((x)); mtx_lock_spin((lock));} ++//#define IFT_RTW 0xf9 //ifnet allocate type for RTW ++#define free_netdev if_free ++#define LIST_CONTAINOR(ptr, type, member) \ ++ ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member))) ++#define container_of(p,t,n) (t*)((p)-&(((t*)0)->n)) ++/* ++ * Linux timers are emulated using FreeBSD callout functions ++ * (and taskqueue functionality). ++ * ++ * Currently no timer stats functionality. ++ * ++ * See (linux_compat) processes.c ++ * ++ */ ++struct timer_list { ++ ++ /* FreeBSD callout related fields */ ++ struct callout callout; ++ ++ //timeout function ++ void (*function)(void*); ++ //argument ++ void *arg; ++ ++}; ++struct workqueue_struct; ++struct work_struct; ++typedef void (*work_func_t)(struct work_struct *work); ++/* Values for the state of an item of work (work_struct) */ ++typedef enum work_state { ++ WORK_STATE_UNSET = 0, ++ WORK_STATE_CALLOUT_PENDING = 1, ++ WORK_STATE_TASK_PENDING = 2, ++ WORK_STATE_WORK_CANCELLED = 3 ++} work_state_t; ++ ++struct work_struct { ++ struct task task; /* FreeBSD task */ ++ work_state_t state; /* the pending or otherwise state of work. */ ++ work_func_t func; ++}; ++#define spin_unlock_irqrestore mtx_unlock_irqrestore ++#define spin_unlock_bh mtx_unlock_irqrestore ++#define mtx_unlock_irqrestore(lock,x) mtx_unlock(lock); ++extern void _rtw_spinlock_init(_lock *plock); ++ ++//modify private structure to match freebsd ++#define BITS_PER_LONG 32 ++union ktime { ++ s64 tv64; ++#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR) ++ struct { ++#ifdef __BIG_ENDIAN ++ s32 sec, nsec; ++#else ++ s32 nsec, sec; ++#endif ++ } tv; ++#endif ++}; ++#define kmemcheck_bitfield_begin(name) ++#define kmemcheck_bitfield_end(name) ++#define CHECKSUM_NONE 0 ++typedef unsigned char *sk_buff_data_t; ++typedef union ktime ktime_t; /* Kill this */ ++ ++void rtw_mtx_lock(_lock *plock); ++ ++void rtw_mtx_unlock(_lock *plock); ++ ++/** ++ * struct sk_buff - socket buffer ++ * @next: Next buffer in list ++ * @prev: Previous buffer in list ++ * @sk: Socket we are owned by ++ * @tstamp: Time we arrived ++ * @dev: Device we arrived on/are leaving by ++ * @transport_header: Transport layer header ++ * @network_header: Network layer header ++ * @mac_header: Link layer header ++ * @_skb_refdst: destination entry (with norefcount bit) ++ * @sp: the security path, used for xfrm ++ * @cb: Control buffer. Free for use by every layer. Put private vars here ++ * @len: Length of actual data ++ * @data_len: Data length ++ * @mac_len: Length of link layer header ++ * @hdr_len: writable header length of cloned skb ++ * @csum: Checksum (must include start/offset pair) ++ * @csum_start: Offset from skb->head where checksumming should start ++ * @csum_offset: Offset from csum_start where checksum should be stored ++ * @local_df: allow local fragmentation ++ * @cloned: Head may be cloned (check refcnt to be sure) ++ * @nohdr: Payload reference only, must not modify header ++ * @pkt_type: Packet class ++ * @fclone: skbuff clone status ++ * @ip_summed: Driver fed us an IP checksum ++ * @priority: Packet queueing priority ++ * @users: User count - see {datagram,tcp}.c ++ * @protocol: Packet protocol from driver ++ * @truesize: Buffer size ++ * @head: Head of buffer ++ * @data: Data head pointer ++ * @tail: Tail pointer ++ * @end: End pointer ++ * @destructor: Destruct function ++ * @mark: Generic packet mark ++ * @nfct: Associated connection, if any ++ * @ipvs_property: skbuff is owned by ipvs ++ * @peeked: this packet has been seen already, so stats have been ++ * done for it, don't do them again ++ * @nf_trace: netfilter packet trace flag ++ * @nfctinfo: Relationship of this skb to the connection ++ * @nfct_reasm: netfilter conntrack re-assembly pointer ++ * @nf_bridge: Saved data about a bridged frame - see br_netfilter.c ++ * @skb_iif: ifindex of device we arrived on ++ * @rxhash: the packet hash computed on receive ++ * @queue_mapping: Queue mapping for multiqueue devices ++ * @tc_index: Traffic control index ++ * @tc_verd: traffic control verdict ++ * @ndisc_nodetype: router type (from link layer) ++ * @dma_cookie: a cookie to one of several possible DMA operations ++ * done by skb DMA functions ++ * @secmark: security marking ++ * @vlan_tci: vlan tag control information ++ */ ++ ++struct sk_buff { ++ /* These two members must be first. */ ++ struct sk_buff *next; ++ struct sk_buff *prev; ++ ++ ktime_t tstamp; ++ ++ struct sock *sk; ++ //struct net_device *dev; ++ struct ifnet *dev; ++ ++ /* ++ * This is the control buffer. It is free to use for every ++ * layer. Please put your private variables there. If you ++ * want to keep them across layers you have to do a skb_clone() ++ * first. This is owned by whoever has the skb queued ATM. ++ */ ++ char cb[48] __aligned(8); ++ ++ unsigned long _skb_refdst; ++#ifdef CONFIG_XFRM ++ struct sec_path *sp; ++#endif ++ unsigned int len, ++ data_len; ++ u16 mac_len, ++ hdr_len; ++ union { ++ u32 csum; ++ struct { ++ u16 csum_start; ++ u16 csum_offset; ++ }smbol2; ++ }smbol1; ++ u32 priority; ++ kmemcheck_bitfield_begin(flags1); ++ u8 local_df:1, ++ cloned:1, ++ ip_summed:2, ++ nohdr:1, ++ nfctinfo:3; ++ u8 pkt_type:3, ++ fclone:2, ++ ipvs_property:1, ++ peeked:1, ++ nf_trace:1; ++ kmemcheck_bitfield_end(flags1); ++ u16 protocol; ++ ++ void (*destructor)(struct sk_buff *skb); ++#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) ++ struct nf_conntrack *nfct; ++ struct sk_buff *nfct_reasm; ++#endif ++#ifdef CONFIG_BRIDGE_NETFILTER ++ struct nf_bridge_info *nf_bridge; ++#endif ++ ++ int skb_iif; ++#ifdef CONFIG_NET_SCHED ++ u16 tc_index; /* traffic control index */ ++#ifdef CONFIG_NET_CLS_ACT ++ u16 tc_verd; /* traffic control verdict */ ++#endif ++#endif ++ ++ u32 rxhash; ++ ++ kmemcheck_bitfield_begin(flags2); ++ u16 queue_mapping:16; ++#ifdef CONFIG_IPV6_NDISC_NODETYPE ++ u8 ndisc_nodetype:2, ++ deliver_no_wcard:1; ++#else ++ u8 deliver_no_wcard:1; ++#endif ++ kmemcheck_bitfield_end(flags2); ++ ++ /* 0/14 bit hole */ ++ ++#ifdef CONFIG_NET_DMA ++ dma_cookie_t dma_cookie; ++#endif ++#ifdef CONFIG_NETWORK_SECMARK ++ u32 secmark; ++#endif ++ union { ++ u32 mark; ++ u32 dropcount; ++ }symbol3; ++ ++ u16 vlan_tci; ++ ++ sk_buff_data_t transport_header; ++ sk_buff_data_t network_header; ++ sk_buff_data_t mac_header; ++ /* These elements must be at the end, see alloc_skb() for details. */ ++ sk_buff_data_t tail; ++ sk_buff_data_t end; ++ unsigned char *head, ++ *data; ++ unsigned int truesize; ++ atomic_t users; ++}; ++struct sk_buff_head { ++ /* These two members must be first. */ ++ struct sk_buff *next; ++ struct sk_buff *prev; ++ ++ u32 qlen; ++ _lock lock; ++}; ++#define skb_tail_pointer(skb) skb->tail ++static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len) ++{ ++ unsigned char *tmp = skb_tail_pointer(skb); ++ //SKB_LINEAR_ASSERT(skb); ++ skb->tail += len; ++ skb->len += len; ++ return tmp; ++} ++ ++static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len) ++{ ++ skb->len -= len; ++ if(skb->len < skb->data_len) ++ printf("%s(),%d,error!\n",__FUNCTION__,__LINE__); ++ return skb->data += len; ++} ++static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len) ++{ ++ #ifdef PLATFORM_FREEBSD ++ return __skb_pull(skb, len); ++ #else ++ return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len); ++ #endif //PLATFORM_FREEBSD ++} ++static inline u32 skb_queue_len(const struct sk_buff_head *list_) ++{ ++ return list_->qlen; ++} ++static inline void __skb_insert(struct sk_buff *newsk, ++ struct sk_buff *prev, struct sk_buff *next, ++ struct sk_buff_head *list) ++{ ++ newsk->next = next; ++ newsk->prev = prev; ++ next->prev = prev->next = newsk; ++ list->qlen++; ++} ++static inline void __skb_queue_before(struct sk_buff_head *list, ++ struct sk_buff *next, ++ struct sk_buff *newsk) ++{ ++ __skb_insert(newsk, next->prev, next, list); ++} ++static inline void skb_queue_tail(struct sk_buff_head *list, ++ struct sk_buff *newsk) ++{ ++ mtx_lock(&list->lock); ++ __skb_queue_before(list, (struct sk_buff *)list, newsk); ++ mtx_unlock(&list->lock); ++} ++static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) ++{ ++ struct sk_buff *list = ((struct sk_buff *)list_)->next; ++ if (list == (struct sk_buff *)list_) ++ list = NULL; ++ return list; ++} ++static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list) ++{ ++ struct sk_buff *next, *prev; ++ ++ list->qlen--; ++ next = skb->next; ++ prev = skb->prev; ++ skb->next = skb->prev = NULL; ++ next->prev = prev; ++ prev->next = next; ++} ++ ++static inline struct sk_buff *skb_dequeue(struct sk_buff_head *list) ++{ ++ mtx_lock(&list->lock); ++ ++ struct sk_buff *skb = skb_peek(list); ++ if (skb) ++ __skb_unlink(skb, list); ++ ++ mtx_unlock(&list->lock); ++ ++ return skb; ++} ++static inline void skb_reserve(struct sk_buff *skb, int len) ++{ ++ skb->data += len; ++ skb->tail += len; ++} ++static inline void __skb_queue_head_init(struct sk_buff_head *list) ++{ ++ list->prev = list->next = (struct sk_buff *)list; ++ list->qlen = 0; ++} ++/* ++ * This function creates a split out lock class for each invocation; ++ * this is needed for now since a whole lot of users of the skb-queue ++ * infrastructure in drivers have different locking usage (in hardirq) ++ * than the networking core (in softirq only). In the long run either the ++ * network layer or drivers should need annotation to consolidate the ++ * main types of usage into 3 classes. ++ */ ++static inline void skb_queue_head_init(struct sk_buff_head *list) ++{ ++ _rtw_spinlock_init(&list->lock); ++ __skb_queue_head_init(list); ++} ++unsigned long copy_from_user(void *to, const void *from, unsigned long n); ++unsigned long copy_to_user(void *to, const void *from, unsigned long n); ++struct sk_buff * dev_alloc_skb(unsigned int size); ++struct sk_buff *skb_clone(const struct sk_buff *skb); ++void dev_kfree_skb_any(struct sk_buff *skb); ++#endif //Baron porting from linux, it's all temp solution, needs to check again ++ ++ ++#if 1 // kenny add Linux compatibility code for Linux USB driver ++#include ++ ++#define __init // __attribute ((constructor)) ++#define __exit // __attribute ((destructor)) ++ ++/* ++ * Definitions for module_init and module_exit macros. ++ * ++ * These macros will use the SYSINIT framework to call a specified ++ * function (with no arguments) on module loading or unloading. ++ * ++ */ ++ ++void module_init_exit_wrapper(void *arg); ++ ++#define module_init(initfn) \ ++ SYSINIT(mod_init_ ## initfn, \ ++ SI_SUB_KLD, SI_ORDER_FIRST, \ ++ module_init_exit_wrapper, initfn) ++ ++#define module_exit(exitfn) \ ++ SYSUNINIT(mod_exit_ ## exitfn, \ ++ SI_SUB_KLD, SI_ORDER_ANY, \ ++ module_init_exit_wrapper, exitfn) ++ ++/* ++ * The usb_register and usb_deregister functions are used to register ++ * usb drivers with the usb subsystem. ++ */ ++int usb_register(struct usb_driver *driver); ++int usb_deregister(struct usb_driver *driver); ++ ++/* ++ * usb_get_dev and usb_put_dev - increment/decrement the reference count ++ * of the usb device structure. ++ * ++ * Original body of usb_get_dev: ++ * ++ * if (dev) ++ * get_device(&dev->dev); ++ * return dev; ++ * ++ * Reference counts are not currently used in this compatibility ++ * layer. So these functions will do nothing. ++ */ ++static inline struct usb_device * ++usb_get_dev(struct usb_device *dev) ++{ ++ return dev; ++} ++ ++static inline void ++usb_put_dev(struct usb_device *dev) ++{ ++ return; ++} ++ ++ ++// rtw_usb_compat_linux ++int rtw_usb_submit_urb(struct urb *urb, uint16_t mem_flags); ++int rtw_usb_unlink_urb(struct urb *urb); ++int rtw_usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe); ++int rtw_usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe, ++ uint8_t request, uint8_t requesttype, ++ uint16_t value, uint16_t index, void *data, ++ uint16_t size, usb_timeout_t timeout); ++int rtw_usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index); ++int rtw_usb_setup_endpoint(struct usb_device *dev, ++ struct usb_host_endpoint *uhe, usb_size_t bufsize); ++struct urb *rtw_usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags); ++struct usb_host_endpoint *rtw_usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep); ++struct usb_host_interface *rtw_usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index); ++struct usb_interface *rtw_usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no); ++void *rtw_usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint8_t *dma_addr); ++void *rtw_usbd_get_intfdata(struct usb_interface *intf); ++void rtw_usb_linux_register(void *arg); ++void rtw_usb_linux_deregister(void *arg); ++void rtw_usb_linux_free_device(struct usb_device *dev); ++void rtw_usb_buffer_free(struct usb_device *dev, usb_size_t size, ++ void *addr, uint8_t dma_addr); ++void rtw_usb_free_urb(struct urb *urb); ++void rtw_usb_init_urb(struct urb *urb); ++void rtw_usb_kill_urb(struct urb *urb); ++void rtw_usb_set_intfdata(struct usb_interface *intf, void *data); ++void rtw_usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev, ++ struct usb_host_endpoint *uhe, void *buf, ++ int length, usb_complete_t callback, void *arg); ++int rtw_usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe, ++ void *data, int len, uint16_t *pactlen, usb_timeout_t timeout); ++void *usb_get_intfdata(struct usb_interface *intf); ++int usb_linux_init_endpoints(struct usb_device *udev); ++ ++ ++ ++typedef struct urb * PURB; ++ ++typedef unsigned gfp_t; ++#define __GFP_WAIT ((gfp_t)0x10u) /* Can wait and reschedule? */ ++#define __GFP_HIGH ((gfp_t)0x20u) /* Should access emergency pools? */ ++#define __GFP_IO ((gfp_t)0x40u) /* Can start physical IO? */ ++#define __GFP_FS ((gfp_t)0x80u) /* Can call down to low-level FS? */ ++#define __GFP_COLD ((gfp_t)0x100u) /* Cache-cold page required */ ++#define __GFP_NOWARN ((gfp_t)0x200u) /* Suppress page allocation failure warning */ ++#define __GFP_REPEAT ((gfp_t)0x400u) /* Retry the allocation. Might fail */ ++#define __GFP_NOFAIL ((gfp_t)0x800u) /* Retry for ever. Cannot fail */ ++#define __GFP_NORETRY ((gfp_t)0x1000u)/* Do not retry. Might fail */ ++#define __GFP_NO_GROW ((gfp_t)0x2000u)/* Slab internal usage */ ++#define __GFP_COMP ((gfp_t)0x4000u)/* Add compound page metadata */ ++#define __GFP_ZERO ((gfp_t)0x8000u)/* Return zeroed page on success */ ++#define __GFP_NOMEMALLOC ((gfp_t)0x10000u) /* Don't use emergency reserves */ ++#define __GFP_HARDWALL ((gfp_t)0x20000u) /* Enforce hardwall cpuset memory allocs */ ++ ++/* This equals 0, but use constants in case they ever change */ ++#define GFP_NOWAIT (GFP_ATOMIC & ~__GFP_HIGH) ++/* GFP_ATOMIC means both !wait (__GFP_WAIT not set) and use emergency pool */ ++#define GFP_ATOMIC (__GFP_HIGH) ++#define GFP_NOIO (__GFP_WAIT) ++#define GFP_NOFS (__GFP_WAIT | __GFP_IO) ++#define GFP_KERNEL (__GFP_WAIT | __GFP_IO | __GFP_FS) ++#define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL) ++#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \ ++ __GFP_HIGHMEM) ++ ++ ++#endif // kenny add Linux compatibility code for Linux USB ++ ++ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ++#endif ++ ++__inline static _list *get_next(_list *list) ++{ ++ return list->next; ++} ++ ++__inline static _list *get_list_head(_queue *queue) ++{ ++ return (&(queue->queue)); ++} ++ ++ ++#define LIST_CONTAINOR(ptr, type, member) \ ++ ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member))) ++ ++ ++__inline static void _enter_critical(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_irqsave(plock, *pirqL); ++} ++ ++__inline static void _exit_critical(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_irqrestore(plock, *pirqL); ++} ++ ++__inline static void _enter_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_irqsave(plock, *pirqL); ++} ++ ++__inline static void _exit_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_irqrestore(plock, *pirqL); ++} ++ ++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_bh(plock, *pirqL); ++} ++ ++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_bh(plock, *pirqL); ++} ++ ++__inline static void _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++ ++ mtx_lock(pmutex); ++ ++} ++ ++ ++__inline static void _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++ ++ mtx_unlock(pmutex); ++ ++} ++static inline void __list_del(struct list_head * prev, struct list_head * next) ++{ ++ next->prev = prev; ++ prev->next = next; ++} ++static inline void INIT_LIST_HEAD(struct list_head *list) ++{ ++ list->next = list; ++ list->prev = list; ++} ++__inline static void rtw_list_delete(_list *plist) ++{ ++ __list_del(plist->prev, plist->next); ++ INIT_LIST_HEAD(plist); ++} ++ ++__inline static void _init_timer(_timer *ptimer,_nic_hdl padapter,void *pfunc,void* cntx) ++{ ++ ptimer->function = pfunc; ++ ptimer->arg = cntx; ++ callout_init(&ptimer->callout, CALLOUT_MPSAFE); ++} ++ ++__inline static void _set_timer(_timer *ptimer,u32 delay_time) ++{ ++ // mod_timer(ptimer , (jiffies+(delay_time*HZ/1000))); ++ if(ptimer->function && ptimer->arg){ ++ rtw_mtx_lock(NULL); ++ callout_reset(&ptimer->callout, delay_time,ptimer->function, ptimer->arg); ++ rtw_mtx_unlock(NULL); ++ } ++} ++ ++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled) ++{ ++ // del_timer_sync(ptimer); ++ // *bcancelled= _TRUE;//TRUE ==1; FALSE==0 ++ rtw_mtx_lock(NULL); ++ callout_drain(&ptimer->callout); ++ rtw_mtx_unlock(NULL); ++} ++ ++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx) ++{ ++ printf("%s Not implement yet! \n",__FUNCTION__); ++} ++ ++__inline static void _set_workitem(_workitem *pwork) ++{ ++ printf("%s Not implement yet! \n",__FUNCTION__); ++// schedule_work(pwork); ++} ++ ++// ++// Global Mutex: can only be used at PASSIVE level. ++// ++ ++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++} ++ ++#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++} ++ ++#define ATOMIC_INIT(i) { (i) } ++ ++#endif //PLATFORM_FREEBSD ++ ++ ++#ifdef PLATFORM_LINUX ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,5)) ++ #include ++#endif ++ //#include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++ #include ++#else ++ #include ++#endif ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include ++ #include // Necessary because we use the proc fs ++ #include // for struct tasklet_struct ++ #include ++ #include ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++// #include ++ #include ++ #include ++#endif //CONFIG_IOCTL_CFG80211 ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ #include ++ #include ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ #include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) ++ #include ++#else ++ #include ++#endif ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ #include ++#endif ++ ++ ++#ifdef CONFIG_USB_HCI ++ typedef struct urb * PURB; ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22)) ++#ifdef CONFIG_USB_SUSPEND ++#define CONFIG_AUTOSUSPEND 1 ++#endif ++#endif ++#endif ++ ++ typedef struct semaphore _sema; ++ typedef spinlock_t _lock; ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ typedef struct mutex _mutex; ++#else ++ typedef struct semaphore _mutex; ++#endif ++ typedef struct timer_list _timer; ++ ++ struct __queue { ++ struct list_head queue; ++ _lock lock; ++ }; ++ ++ typedef struct sk_buff _pkt; ++ typedef unsigned char _buffer; ++ ++ typedef struct __queue _queue; ++ typedef struct list_head _list; ++ typedef int _OS_STATUS; ++ //typedef u32 _irqL; ++ typedef unsigned long _irqL; ++ typedef struct net_device * _nic_hdl; ++ ++ typedef void* _thread_hdl_; ++ typedef int thread_return; ++ typedef void* thread_context; ++ ++ #define thread_exit() complete_and_exit(NULL, 0) ++ ++ typedef void timer_hdl_return; ++ typedef void* timer_hdl_context; ++ typedef struct work_struct _workitem; ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)) ++// Porting from linux kernel, for compatible with old kernel. ++static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb) ++{ ++ return skb->tail; ++} ++ ++static inline void skb_reset_tail_pointer(struct sk_buff *skb) ++{ ++ skb->tail = skb->data; ++} ++ ++static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset) ++{ ++ skb->tail = skb->data + offset; ++} ++ ++static inline unsigned char *skb_end_pointer(const struct sk_buff *skb) ++{ ++ return skb->end; ++} ++#endif ++ ++__inline static _list *get_next(_list *list) ++{ ++ return list->next; ++} ++ ++__inline static _list *get_list_head(_queue *queue) ++{ ++ return (&(queue->queue)); ++} ++ ++ ++#define LIST_CONTAINOR(ptr, type, member) \ ++ ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member))) ++ ++ ++__inline static void _enter_critical(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_irqsave(plock, *pirqL); ++} ++ ++__inline static void _exit_critical(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_irqrestore(plock, *pirqL); ++} ++ ++__inline static void _enter_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_irqsave(plock, *pirqL); ++} ++ ++__inline static void _exit_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_irqrestore(plock, *pirqL); ++} ++ ++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ spin_lock_bh(plock); ++} ++ ++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ spin_unlock_bh(plock); ++} ++ ++__inline static void _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ mutex_lock(pmutex); ++#else ++ down(pmutex); ++#endif ++} ++ ++ ++__inline static void _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ mutex_unlock(pmutex); ++#else ++ up(pmutex); ++#endif ++} ++ ++__inline static void rtw_list_delete(_list *plist) ++{ ++ list_del_init(plist); ++} ++ ++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,void* cntx) ++{ ++ //setup_timer(ptimer, pfunc,(u32)cntx); ++ ptimer->function = pfunc; ++ ptimer->data = (unsigned long)cntx; ++ init_timer(ptimer); ++} ++ ++__inline static void _set_timer(_timer *ptimer,u32 delay_time) ++{ ++ mod_timer(ptimer , (jiffies+(delay_time*HZ/1000))); ++} ++ ++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled) ++{ ++ del_timer_sync(ptimer); ++ *bcancelled= _TRUE;//TRUE ==1; FALSE==0 ++} ++ ++#ifdef PLATFORM_LINUX ++#define RTW_TIMER_HDL_ARGS void *FunctionContext ++#elif defined(PLATFORM_OS_CE) || defined(PLATFORM_WINDOWS) ++#define RTW_TIMER_HDL_ARGS IN PVOID SystemSpecific1, IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3 ++#endif ++ ++#define RTW_TIMER_HDL_NAME(name) rtw_##name##_timer_hdl ++#define RTW_DECLARE_TIMER_HDL(name) void RTW_TIMER_HDL_NAME(name)(RTW_TIMER_HDL_ARGS) ++ ++ ++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx) ++{ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) ++ INIT_WORK(pwork, pfunc); ++#else ++ INIT_WORK(pwork, pfunc,pwork); ++#endif ++} ++ ++__inline static void _set_workitem(_workitem *pwork) ++{ ++ schedule_work(pwork); ++} ++ ++__inline static void _cancel_workitem_sync(_workitem *pwork) ++{ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22)) ++ cancel_work_sync(pwork); ++#else ++ flush_scheduled_work(); ++#endif ++} ++ ++// ++// Global Mutex: can only be used at PASSIVE level. ++// ++ ++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ while (atomic_inc_return((atomic_t *)&(_MutexCounter)) != 1)\ ++ { \ ++ atomic_dec((atomic_t *)&(_MutexCounter)); \ ++ msleep(10); \ ++ } \ ++} ++ ++#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ atomic_dec((atomic_t *)&(_MutexCounter)); \ ++} ++ ++static inline int rtw_netif_queue_stopped(struct net_device *pnetdev) ++{ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ return (netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 0)) && ++ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 1)) && ++ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 2)) && ++ netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 3)) ); ++#else ++ return netif_queue_stopped(pnetdev); ++#endif ++} ++ ++static inline void rtw_netif_wake_queue(struct net_device *pnetdev) ++{ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ netif_tx_wake_all_queues(pnetdev); ++#else ++ netif_wake_queue(pnetdev); ++#endif ++} ++ ++static inline void rtw_netif_start_queue(struct net_device *pnetdev) ++{ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ netif_tx_start_all_queues(pnetdev); ++#else ++ netif_start_queue(pnetdev); ++#endif ++} ++ ++static inline void rtw_netif_stop_queue(struct net_device *pnetdev) ++{ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ netif_tx_stop_all_queues(pnetdev); ++#else ++ netif_stop_queue(pnetdev); ++#endif ++} ++ ++#endif // PLATFORM_LINUX ++ ++ ++#ifdef PLATFORM_OS_XP ++ ++ #include ++ #include ++ #include ++ #include ++ ++#ifdef CONFIG_USB_HCI ++ #include ++ #include ++ #include ++#endif ++ ++ typedef KSEMAPHORE _sema; ++ typedef LIST_ENTRY _list; ++ typedef NDIS_STATUS _OS_STATUS; ++ ++ ++ typedef NDIS_SPIN_LOCK _lock; ++ ++ typedef KMUTEX _mutex; ++ ++ typedef KIRQL _irqL; ++ ++ // USB_PIPE for WINCE , but handle can be use just integer under windows ++ typedef NDIS_HANDLE _nic_hdl; ++ ++ ++ typedef NDIS_MINIPORT_TIMER _timer; ++ ++ struct __queue { ++ LIST_ENTRY queue; ++ _lock lock; ++ }; ++ ++ typedef NDIS_PACKET _pkt; ++ typedef NDIS_BUFFER _buffer; ++ typedef struct __queue _queue; ++ ++ typedef PKTHREAD _thread_hdl_; ++ typedef void thread_return; ++ typedef void* thread_context; ++ ++ typedef NDIS_WORK_ITEM _workitem; ++ ++ #define thread_exit() PsTerminateSystemThread(STATUS_SUCCESS); ++ ++ #define HZ 10000000 ++ #define SEMA_UPBND (0x7FFFFFFF) //8192 ++ ++__inline static _list *get_next(_list *list) ++{ ++ return list->Flink; ++} ++ ++__inline static _list *get_list_head(_queue *queue) ++{ ++ return (&(queue->queue)); ++} ++ ++ ++#define LIST_CONTAINOR(ptr, type, member) CONTAINING_RECORD(ptr, type, member) ++ ++ ++__inline static _enter_critical(_lock *plock, _irqL *pirqL) ++{ ++ NdisAcquireSpinLock(plock); ++} ++ ++__inline static _exit_critical(_lock *plock, _irqL *pirqL) ++{ ++ NdisReleaseSpinLock(plock); ++} ++ ++ ++__inline static _enter_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprAcquireSpinLock(plock); ++} ++ ++__inline static _exit_critical_ex(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprReleaseSpinLock(plock); ++} ++ ++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprAcquireSpinLock(plock); ++} ++ ++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL) ++{ ++ NdisDprReleaseSpinLock(plock); ++} ++ ++__inline static _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++ KeWaitForSingleObject(pmutex, Executive, KernelMode, FALSE, NULL); ++} ++ ++ ++__inline static _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL) ++{ ++ KeReleaseMutex(pmutex, FALSE); ++} ++ ++ ++__inline static void rtw_list_delete(_list *plist) ++{ ++ RemoveEntryList(plist); ++ InitializeListHead(plist); ++} ++ ++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,PVOID cntx) ++{ ++ NdisMInitializeTimer(ptimer, nic_hdl, pfunc, cntx); ++} ++ ++__inline static void _set_timer(_timer *ptimer,u32 delay_time) ++{ ++ NdisMSetTimer(ptimer,delay_time); ++} ++ ++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled) ++{ ++ NdisMCancelTimer(ptimer,bcancelled); ++} ++ ++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx) ++{ ++ ++ NdisInitializeWorkItem(pwork, pfunc, cntx); ++} ++ ++__inline static void _set_workitem(_workitem *pwork) ++{ ++ NdisScheduleWorkItem(pwork); ++} ++ ++ ++#define ATOMIC_INIT(i) { (i) } ++ ++// ++// Global Mutex: can only be used at PASSIVE level. ++// ++ ++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ while (NdisInterlockedIncrement((PULONG)&(_MutexCounter)) != 1)\ ++ { \ ++ NdisInterlockedDecrement((PULONG)&(_MutexCounter)); \ ++ NdisMSleep(10000); \ ++ } \ ++} ++ ++#define RELEASE_GLOBAL_MUTEX(_MutexCounter) \ ++{ \ ++ NdisInterlockedDecrement((PULONG)&(_MutexCounter)); \ ++} ++ ++#endif // PLATFORM_OS_XP ++ ++ ++#ifdef PLATFORM_OS_CE ++#include ++#endif ++ ++#include ++ ++#ifndef BIT ++ #define BIT(x) ( 1 << (x)) ++#endif ++ ++extern int RTW_STATUS_CODE(int error_code); ++ ++#define CONFIG_USE_VMALLOC ++ ++/* flags used for rtw_mstat_update() */ ++enum mstat_f { ++ /* type: 0x00ff */ ++ MSTAT_TYPE_VIR = 0x00, ++ MSTAT_TYPE_PHY= 0x01, ++ MSTAT_TYPE_SKB = 0x02, ++ MSTAT_TYPE_USB = 0x03, ++ MSTAT_TYPE_MAX = 0x04, ++ ++ /* func: 0xff00 */ ++ MSTAT_FUNC_UNSPECIFIED = 0x00<<8, ++ MSTAT_FUNC_IO = 0x01<<8, ++ MSTAT_FUNC_TX_IO = 0x02<<8, ++ MSTAT_FUNC_RX_IO = 0x03<<8, ++ MSTAT_FUNC_TX = 0x04<<8, ++ MSTAT_FUNC_RX = 0x05<<8, ++ MSTAT_FUNC_MAX = 0x06<<8, ++}; ++ ++#define mstat_tf_idx(flags) ((flags)&0xff) ++#define mstat_ff_idx(flags) (((flags)&0xff00) >> 8) ++ ++typedef enum mstat_status{ ++ MSTAT_ALLOC_SUCCESS = 0, ++ MSTAT_ALLOC_FAIL, ++ MSTAT_FREE ++} MSTAT_STATUS; ++ ++#ifdef DBG_MEM_ALLOC ++void rtw_mstat_update(const enum mstat_f flags, const MSTAT_STATUS status, u32 sz); ++int _rtw_mstat_dump(char *buf, int len); ++void rtw_mstat_dump (void); ++u8* dbg_rtw_vmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line); ++u8* dbg_rtw_zvmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line); ++void dbg_rtw_vmfree(u8 *pbuf, const enum mstat_f flags, u32 sz, const char *func, const int line); ++u8* dbg_rtw_malloc(u32 sz, const enum mstat_f flags, const char *func, const int line); ++u8* dbg_rtw_zmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line); ++void dbg_rtw_mfree(u8 *pbuf, const enum mstat_f flags, u32 sz, const char *func, const int line); ++ ++struct sk_buff * dbg_rtw_skb_alloc(unsigned int size, const enum mstat_f flags, const char *func, const int line); ++void dbg_rtw_skb_free(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line); ++struct sk_buff *dbg_rtw_skb_copy(const struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line); ++struct sk_buff *dbg_rtw_skb_clone(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line); ++int dbg_rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb, const enum mstat_f flags, const char *func, int line); ++void dbg_rtw_skb_queue_purge(struct sk_buff_head *list, enum mstat_f flags, const char *func, int line); ++ ++#ifdef CONFIG_USB_HCI ++void *dbg_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma, const enum mstat_f flags, const char *func, const int line); ++void dbg_rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma, const enum mstat_f flags, const char *func, const int line); ++#endif /* CONFIG_USB_HCI */ ++ ++#ifdef CONFIG_USE_VMALLOC ++#define rtw_vmalloc(sz) dbg_rtw_vmalloc((sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#define rtw_zvmalloc(sz) dbg_rtw_zvmalloc((sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#define rtw_vmfree(pbuf, sz) dbg_rtw_vmfree((pbuf), (sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#define rtw_vmalloc_f(sz, mstat_f) dbg_rtw_vmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#define rtw_zvmalloc_f(sz, mstat_f) dbg_rtw_zvmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#define rtw_vmfree_f(pbuf, sz, mstat_f) dbg_rtw_vmfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__) ++#else /* CONFIG_USE_VMALLOC */ ++#define rtw_vmalloc(sz) dbg_rtw_malloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_zvmalloc(sz) dbg_rtw_zmalloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_vmfree(pbuf, sz) dbg_rtw_mfree((pbuf), (sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_vmalloc_f(sz, mstat_f) dbg_rtw_malloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_zvmalloc_f(sz, mstat_f) dbg_rtw_zmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_vmfree_f(pbuf, sz, mstat_f) dbg_rtw_mfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#endif /* CONFIG_USE_VMALLOC */ ++#define rtw_malloc(sz) dbg_rtw_malloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_zmalloc(sz) dbg_rtw_zmalloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_mfree(pbuf, sz) dbg_rtw_mfree((pbuf), (sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_malloc_f(sz, mstat_f) dbg_rtw_malloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_zmalloc_f(sz, mstat_f) dbg_rtw_zmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++#define rtw_mfree_f(pbuf, sz, mstat_f) dbg_rtw_mfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__) ++ ++#define rtw_skb_alloc(size) dbg_rtw_skb_alloc((size), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_free(skb) dbg_rtw_skb_free((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_alloc_f(size, mstat_f) dbg_rtw_skb_alloc((size), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_free_f(skb, mstat_f) dbg_rtw_skb_free((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_copy(skb) dbg_rtw_skb_copy((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_clone(skb) dbg_rtw_skb_clone((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_copy_f(skb, mstat_f) dbg_rtw_skb_copy((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_clone_f(skb, mstat_f) dbg_rtw_skb_clone((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_netif_rx(ndev, skb) dbg_rtw_netif_rx(ndev, skb, MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#define rtw_skb_queue_purge(sk_buff_head) dbg_rtw_skb_queue_purge(sk_buff_head, MSTAT_TYPE_SKB, __FUNCTION__, __LINE__) ++#ifdef CONFIG_USB_HCI ++#define rtw_usb_buffer_alloc(dev, size, dma) dbg_rtw_usb_buffer_alloc((dev), (size), (dma), MSTAT_TYPE_USB, __FUNCTION__, __LINE__) ++#define rtw_usb_buffer_free(dev, size, addr, dma) dbg_rtw_usb_buffer_free((dev), (size), (addr), (dma), MSTAT_TYPE_USB, __FUNCTION__, __LINE__) ++#define rtw_usb_buffer_alloc_f(dev, size, dma, mstat_f) dbg_rtw_usb_buffer_alloc((dev), (size), (dma), ((mstat_f)&0xff00)|MSTAT_TYPE_USB, __FUNCTION__, __LINE__) ++#define rtw_usb_buffer_free_f(dev, size, addr, dma, mstat_f) dbg_rtw_usb_buffer_free((dev), (size), (addr), (dma), ((mstat_f)&0xff00)|MSTAT_TYPE_USB, __FUNCTION__, __LINE__) ++#endif /* CONFIG_USB_HCI */ ++ ++#else /* DBG_MEM_ALLOC */ ++#define rtw_mstat_update(flag, status, sz) do {} while(0) ++#define rtw_mstat_dump() do {} while(0) ++u8* _rtw_vmalloc(u32 sz); ++u8* _rtw_zvmalloc(u32 sz); ++void _rtw_vmfree(u8 *pbuf, u32 sz); ++u8* _rtw_zmalloc(u32 sz); ++u8* _rtw_malloc(u32 sz); ++void _rtw_mfree(u8 *pbuf, u32 sz); ++ ++struct sk_buff *_rtw_skb_alloc(u32 sz); ++void _rtw_skb_free(struct sk_buff *skb); ++struct sk_buff *_rtw_skb_copy(const struct sk_buff *skb); ++struct sk_buff *_rtw_skb_clone(struct sk_buff *skb); ++int _rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb); ++void _rtw_skb_queue_purge(struct sk_buff_head *list); ++ ++#ifdef CONFIG_USB_HCI ++void *_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma); ++void _rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); ++#endif /* CONFIG_USB_HCI */ ++ ++#ifdef CONFIG_USE_VMALLOC ++#define rtw_vmalloc(sz) _rtw_vmalloc((sz)) ++#define rtw_zvmalloc(sz) _rtw_zvmalloc((sz)) ++#define rtw_vmfree(pbuf, sz) _rtw_vmfree((pbuf), (sz)) ++#define rtw_vmalloc_f(sz, mstat_f) _rtw_vmalloc((sz)) ++#define rtw_zvmalloc_f(sz, mstat_f) _rtw_zvmalloc((sz)) ++#define rtw_vmfree_f(pbuf, sz, mstat_f) _rtw_vmfree((pbuf), (sz)) ++#else /* CONFIG_USE_VMALLOC */ ++#define rtw_vmalloc(sz) _rtw_malloc((sz)) ++#define rtw_zvmalloc(sz) _rtw_zmalloc((sz)) ++#define rtw_vmfree(pbuf, sz) _rtw_mfree((pbuf), (sz)) ++#define rtw_vmalloc_f(sz, mstat_f) _rtw_malloc((sz)) ++#define rtw_zvmalloc_f(sz, mstat_f) _rtw_zmalloc((sz)) ++#define rtw_vmfree_f(pbuf, sz, mstat_f) _rtw_mfree((pbuf), (sz)) ++#endif /* CONFIG_USE_VMALLOC */ ++#define rtw_malloc(sz) _rtw_malloc((sz)) ++#define rtw_zmalloc(sz) _rtw_zmalloc((sz)) ++#define rtw_mfree(pbuf, sz) _rtw_mfree((pbuf), (sz)) ++#define rtw_malloc_f(sz, mstat_f) _rtw_malloc((sz)) ++#define rtw_zmalloc_f(sz, mstat_f) _rtw_zmalloc((sz)) ++#define rtw_mfree_f(pbuf, sz, mstat_f) _rtw_mfree((pbuf), (sz)) ++ ++#define rtw_skb_alloc(size) _rtw_skb_alloc((size)) ++#define rtw_skb_free(skb) _rtw_skb_free((skb)) ++#define rtw_skb_alloc_f(size, mstat_f) _rtw_skb_alloc((size)) ++#define rtw_skb_free_f(skb, mstat_f) _rtw_skb_free((skb)) ++#define rtw_skb_copy(skb) _rtw_skb_copy((skb)) ++#define rtw_skb_clone(skb) _rtw_skb_clone((skb)) ++#define rtw_skb_copy_f(skb, mstat_f) _rtw_skb_copy((skb)) ++#define rtw_skb_clone_f(skb, mstat_f) _rtw_skb_clone((skb)) ++#define rtw_netif_rx(ndev, skb) _rtw_netif_rx(ndev, skb) ++#define rtw_skb_queue_purge(sk_buff_head) _rtw_skb_queue_purge(sk_buff_head) ++#ifdef CONFIG_USB_HCI ++#define rtw_usb_buffer_alloc(dev, size, dma) _rtw_usb_buffer_alloc((dev), (size), (dma)) ++#define rtw_usb_buffer_free(dev, size, addr, dma) _rtw_usb_buffer_free((dev), (size), (addr), (dma)) ++#define rtw_usb_buffer_alloc_f(dev, size, dma, mstat_f) _rtw_usb_buffer_alloc((dev), (size), (dma)) ++#define rtw_usb_buffer_free_f(dev, size, addr, dma, mstat_f) _rtw_usb_buffer_free((dev), (size), (addr), (dma)) ++#endif /* CONFIG_USB_HCI */ ++#endif /* DBG_MEM_ALLOC */ ++ ++extern void* rtw_malloc2d(int h, int w, int size); ++extern void rtw_mfree2d(void *pbuf, int h, int w, int size); ++ ++extern void _rtw_memcpy(void* dec, void* sour, u32 sz); ++extern int _rtw_memcmp(void *dst, void *src, u32 sz); ++extern void _rtw_memset(void *pbuf, int c, u32 sz); ++ ++extern void _rtw_init_listhead(_list *list); ++extern u32 rtw_is_list_empty(_list *phead); ++extern void rtw_list_insert_head(_list *plist, _list *phead); ++extern void rtw_list_insert_tail(_list *plist, _list *phead); ++#ifndef PLATFORM_FREEBSD ++extern void rtw_list_delete(_list *plist); ++#endif //PLATFORM_FREEBSD ++ ++extern void _rtw_init_sema(_sema *sema, int init_val); ++extern void _rtw_free_sema(_sema *sema); ++extern void _rtw_up_sema(_sema *sema); ++extern u32 _rtw_down_sema(_sema *sema); ++extern void _rtw_mutex_init(_mutex *pmutex); ++extern void _rtw_mutex_free(_mutex *pmutex); ++#ifndef PLATFORM_FREEBSD ++extern void _rtw_spinlock_init(_lock *plock); ++#endif //PLATFORM_FREEBSD ++extern void _rtw_spinlock_free(_lock *plock); ++extern void _rtw_spinlock(_lock *plock); ++extern void _rtw_spinunlock(_lock *plock); ++extern void _rtw_spinlock_ex(_lock *plock); ++extern void _rtw_spinunlock_ex(_lock *plock); ++ ++extern void _rtw_init_queue(_queue *pqueue); ++extern u32 _rtw_queue_empty(_queue *pqueue); ++extern u32 rtw_end_of_queue_search(_list *queue, _list *pelement); ++ ++extern u32 rtw_get_current_time(void); ++extern u32 rtw_systime_to_ms(u32 systime); ++extern u32 rtw_ms_to_systime(u32 ms); ++extern s32 rtw_get_passing_time_ms(u32 start); ++extern s32 rtw_get_time_interval_ms(u32 start, u32 end); ++ ++extern void rtw_sleep_schedulable(int ms); ++ ++extern void rtw_msleep_os(int ms); ++extern void rtw_usleep_os(int us); ++ ++extern u32 rtw_atoi(u8* s); ++ ++#ifdef DBG_DELAY_OS ++#define rtw_mdelay_os(ms) _rtw_mdelay_os((ms), __FUNCTION__, __LINE__) ++#define rtw_udelay_os(ms) _rtw_udelay_os((ms), __FUNCTION__, __LINE__) ++extern void _rtw_mdelay_os(int ms, const char *func, const int line); ++extern void _rtw_udelay_os(int us, const char *func, const int line); ++#else ++extern void rtw_mdelay_os(int ms); ++extern void rtw_udelay_os(int us); ++#endif ++ ++extern void rtw_yield_os(void); ++ ++ ++__inline static unsigned char _cancel_timer_ex(_timer *ptimer) ++{ ++#ifdef PLATFORM_LINUX ++ return del_timer_sync(ptimer); ++#endif ++#ifdef PLATFORM_FREEBSD ++ _cancel_timer(ptimer,0); ++ return 0; ++#endif ++#ifdef PLATFORM_WINDOWS ++ u8 bcancelled; ++ ++ _cancel_timer(ptimer, &bcancelled); ++ ++ return bcancelled; ++#endif ++} ++ ++#ifdef PLATFORM_FREEBSD ++static __inline void thread_enter(void *context); ++#endif //PLATFORM_FREEBSD ++static __inline void thread_enter(char *name) ++{ ++#ifdef PLATFORM_LINUX ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)) ++ daemonize("%s", name); ++ #endif ++ allow_signal(SIGTERM); ++#endif ++#ifdef PLATFORM_FREEBSD ++ printf("%s", "RTKTHREAD_enter"); ++#endif ++} ++ ++#ifdef PLATFORM_FREEBSD ++#define thread_exit() do{printf("%s", "RTKTHREAD_exit");}while(0) ++#endif //PLATFORM_FREEBSD ++__inline static void flush_signals_thread(void) ++{ ++#ifdef PLATFORM_LINUX ++ if (signal_pending (current)) ++ { ++ flush_signals(current); ++ } ++#endif ++} ++ ++__inline static _OS_STATUS res_to_status(sint res) ++{ ++ ++ ++#if defined (PLATFORM_LINUX) || defined (PLATFORM_MPIXEL) || defined (PLATFORM_FREEBSD) ++ return res; ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++ if (res == _SUCCESS) ++ return NDIS_STATUS_SUCCESS; ++ else ++ return NDIS_STATUS_FAILURE; ++ ++#endif ++ ++} ++ ++__inline static void rtw_dump_stack(void) ++{ ++#ifdef PLATFORM_LINUX ++ dump_stack(); ++#endif ++} ++ ++#ifdef PLATFORM_LINUX ++#define rtw_warn_on(condition) WARN_ON(condition) ++#else ++#define rtw_warn_on(condition) do {} while (0) ++#endif ++ ++#define _RND(sz, r) ((((sz)+((r)-1))/(r))*(r)) ++#define RND4(x) (((x >> 2) + (((x & 3) == 0) ? 0: 1)) << 2) ++ ++__inline static u32 _RND4(u32 sz) ++{ ++ ++ u32 val; ++ ++ val = ((sz >> 2) + ((sz & 3) ? 1: 0)) << 2; ++ ++ return val; ++ ++} ++ ++__inline static u32 _RND8(u32 sz) ++{ ++ ++ u32 val; ++ ++ val = ((sz >> 3) + ((sz & 7) ? 1: 0)) << 3; ++ ++ return val; ++ ++} ++ ++__inline static u32 _RND128(u32 sz) ++{ ++ ++ u32 val; ++ ++ val = ((sz >> 7) + ((sz & 127) ? 1: 0)) << 7; ++ ++ return val; ++ ++} ++ ++__inline static u32 _RND256(u32 sz) ++{ ++ ++ u32 val; ++ ++ val = ((sz >> 8) + ((sz & 255) ? 1: 0)) << 8; ++ ++ return val; ++ ++} ++ ++__inline static u32 _RND512(u32 sz) ++{ ++ ++ u32 val; ++ ++ val = ((sz >> 9) + ((sz & 511) ? 1: 0)) << 9; ++ ++ return val; ++ ++} ++ ++__inline static u32 bitshift(u32 bitmask) ++{ ++ u32 i; ++ ++ for (i = 0; i <= 31; i++) ++ if (((bitmask>>i) & 0x1) == 1) break; ++ ++ return i; ++} ++ ++#ifndef MAC_FMT ++#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" ++#endif ++#ifndef MAC_ARG ++#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] ++#endif ++ ++//#ifdef __GNUC__ ++#ifdef PLATFORM_LINUX ++#define STRUCT_PACKED __attribute__ ((packed)) ++#else ++#define STRUCT_PACKED ++#endif ++ ++ ++// limitation of path length ++#ifdef PLATFORM_LINUX ++ #define PATH_LENGTH_MAX PATH_MAX ++#elif defined(PLATFORM_WINDOWS) ++ #define PATH_LENGTH_MAX MAX_PATH ++#endif ++ ++ ++// Suspend lock prevent system from going suspend ++#ifdef CONFIG_WAKELOCK ++#include ++#elif defined(CONFIG_ANDROID_POWER) ++#include ++#endif ++ ++extern void rtw_suspend_lock_init(void); ++extern void rtw_suspend_lock_uninit(void); ++extern void rtw_lock_suspend(void); ++extern void rtw_unlock_suspend(void); ++extern void rtw_lock_suspend_timeout(u32 timeout_ms); ++ ++ ++//Atomic integer operations ++#ifdef PLATFORM_LINUX ++ #define ATOMIC_T atomic_t ++#elif defined(PLATFORM_WINDOWS) ++ #define ATOMIC_T LONG ++#elif defined(PLATFORM_FREEBSD) ++ typedef uint32_t ATOMIC_T ; ++#endif ++ ++extern void ATOMIC_SET(ATOMIC_T *v, int i); ++extern int ATOMIC_READ(ATOMIC_T *v); ++extern void ATOMIC_ADD(ATOMIC_T *v, int i); ++extern void ATOMIC_SUB(ATOMIC_T *v, int i); ++extern void ATOMIC_INC(ATOMIC_T *v); ++extern void ATOMIC_DEC(ATOMIC_T *v); ++extern int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i); ++extern int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i); ++extern int ATOMIC_INC_RETURN(ATOMIC_T *v); ++extern int ATOMIC_DEC_RETURN(ATOMIC_T *v); ++ ++//File operation APIs, just for linux now ++extern int rtw_is_file_readable(char *path); ++extern int rtw_retrive_from_file(char *path, u8* buf, u32 sz); ++extern int rtw_store_to_file(char *path, u8* buf, u32 sz); ++ ++ ++#if 1 //#ifdef MEM_ALLOC_REFINE_ADAPTOR ++struct rtw_netdev_priv_indicator { ++ void *priv; ++ u32 sizeof_priv; ++}; ++struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv, void *old_priv); ++extern struct net_device * rtw_alloc_etherdev(int sizeof_priv); ++ ++#ifndef PLATFORM_FREEBSD ++#define rtw_netdev_priv(netdev) ( ((struct rtw_netdev_priv_indicator *)netdev_priv(netdev))->priv ) ++#else //PLATFORM_FREEBSD ++#define rtw_netdev_priv(netdev) (((struct ifnet *)netdev)->if_softc) ++#endif //PLATFORM_FREEBSD ++ ++#ifndef PLATFORM_FREEBSD ++extern void rtw_free_netdev(struct net_device * netdev); ++#else //PLATFORM_FREEBSD ++#define rtw_free_netdev(netdev) if_free((netdev)) ++#endif //PLATFORM_FREEBSD ++ ++#else //MEM_ALLOC_REFINE_ADAPTOR ++ ++#define rtw_alloc_etherdev(sizeof_priv) alloc_etherdev((sizeof_priv)) ++ ++#ifndef PLATFORM_FREEBSD ++#define rtw_netdev_priv(netdev) netdev_priv((netdev)) ++#define rtw_free_netdev(netdev) free_netdev((netdev)) ++#else //PLATFORM_FREEBSD ++#define rtw_netdev_priv(netdev) (((struct ifnet *)netdev)->if_softc) ++#define rtw_free_netdev(netdev) if_free((netdev)) ++#endif //PLATFORM_FREEBSD ++#endif ++ ++#ifdef PLATFORM_LINUX ++#define NDEV_FMT "%s" ++#define NDEV_ARG(ndev) ndev->name ++#define ADPT_FMT "%s" ++#define ADPT_ARG(adapter) adapter->pnetdev->name ++#define FUNC_NDEV_FMT "%s(%s)" ++#define FUNC_NDEV_ARG(ndev) __func__, ndev->name ++#define FUNC_ADPT_FMT "%s(%s)" ++#define FUNC_ADPT_ARG(adapter) __func__, adapter->pnetdev->name ++#else ++#define NDEV_FMT "%s" ++#define NDEV_ARG(ndev) "" ++#define ADPT_FMT "%s" ++#define ADPT_ARG(adapter) "" ++#define FUNC_NDEV_FMT "%s" ++#define FUNC_NDEV_ARG(ndev) __func__ ++#define FUNC_ADPT_FMT "%s" ++#define FUNC_ADPT_ARG(adapter) __func__ ++#endif ++ ++#ifdef PLATFORM_LINUX ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) ++#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)),(sig), 1) ++#else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) ++#define rtw_signal_process(pid, sig) kill_proc((pid), (sig), 1) ++#endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) ++#endif //PLATFORM_LINUX ++ ++extern u64 rtw_modular64(u64 x, u64 y); ++extern u64 rtw_division64(u64 x, u64 y); ++ ++ ++/* Macros for handling unaligned memory accesses */ ++ ++#define RTW_GET_BE16(a) ((u16) (((a)[0] << 8) | (a)[1])) ++#define RTW_PUT_BE16(a, val) \ ++ do { \ ++ (a)[0] = ((u16) (val)) >> 8; \ ++ (a)[1] = ((u16) (val)) & 0xff; \ ++ } while (0) ++ ++#define RTW_GET_LE16(a) ((u16) (((a)[1] << 8) | (a)[0])) ++#define RTW_PUT_LE16(a, val) \ ++ do { \ ++ (a)[1] = ((u16) (val)) >> 8; \ ++ (a)[0] = ((u16) (val)) & 0xff; \ ++ } while (0) ++ ++#define RTW_GET_BE24(a) ((((u32) (a)[0]) << 16) | (((u32) (a)[1]) << 8) | \ ++ ((u32) (a)[2])) ++#define RTW_PUT_BE24(a, val) \ ++ do { \ ++ (a)[0] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[2] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define RTW_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \ ++ (((u32) (a)[2]) << 8) | ((u32) (a)[3])) ++#define RTW_PUT_BE32(a, val) \ ++ do { \ ++ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[3] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define RTW_GET_LE32(a) ((((u32) (a)[3]) << 24) | (((u32) (a)[2]) << 16) | \ ++ (((u32) (a)[1]) << 8) | ((u32) (a)[0])) ++#define RTW_PUT_LE32(a, val) \ ++ do { \ ++ (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \ ++ (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[0] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define RTW_GET_BE64(a) ((((u64) (a)[0]) << 56) | (((u64) (a)[1]) << 48) | \ ++ (((u64) (a)[2]) << 40) | (((u64) (a)[3]) << 32) | \ ++ (((u64) (a)[4]) << 24) | (((u64) (a)[5]) << 16) | \ ++ (((u64) (a)[6]) << 8) | ((u64) (a)[7])) ++#define RTW_PUT_BE64(a, val) \ ++ do { \ ++ (a)[0] = (u8) (((u64) (val)) >> 56); \ ++ (a)[1] = (u8) (((u64) (val)) >> 48); \ ++ (a)[2] = (u8) (((u64) (val)) >> 40); \ ++ (a)[3] = (u8) (((u64) (val)) >> 32); \ ++ (a)[4] = (u8) (((u64) (val)) >> 24); \ ++ (a)[5] = (u8) (((u64) (val)) >> 16); \ ++ (a)[6] = (u8) (((u64) (val)) >> 8); \ ++ (a)[7] = (u8) (((u64) (val)) & 0xff); \ ++ } while (0) ++ ++#define RTW_GET_LE64(a) ((((u64) (a)[7]) << 56) | (((u64) (a)[6]) << 48) | \ ++ (((u64) (a)[5]) << 40) | (((u64) (a)[4]) << 32) | \ ++ (((u64) (a)[3]) << 24) | (((u64) (a)[2]) << 16) | \ ++ (((u64) (a)[1]) << 8) | ((u64) (a)[0])) ++ ++void rtw_buf_free(u8 **buf, u32 *buf_len); ++void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len); ++ ++struct rtw_cbuf { ++ u32 write; ++ u32 read; ++ u32 size; ++ void *bufs[0]; ++}; ++ ++bool rtw_cbuf_full(struct rtw_cbuf *cbuf); ++bool rtw_cbuf_empty(struct rtw_cbuf *cbuf); ++bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf); ++void *rtw_cbuf_pop(struct rtw_cbuf *cbuf); ++struct rtw_cbuf *rtw_cbuf_alloc(u32 size); ++void rtw_cbuf_free(struct rtw_cbuf *cbuf); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/pci_hal.h b/drivers/net/wireless/realtek/rtl8192cu/include/pci_hal.h +new file mode 100644 +index 000000000000..650b04fc015b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/pci_hal.h +@@ -0,0 +1,167 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __PCI_HAL_H__ ++#define __PCI_HAL_H__ ++ ++ ++#define INTEL_VENDOR_ID 0x8086 ++#define SIS_VENDOR_ID 0x1039 ++#define ATI_VENDOR_ID 0x1002 ++#define ATI_DEVICE_ID 0x7914 ++#define AMD_VENDOR_ID 0x1022 ++ ++#define PCI_MAX_BRIDGE_NUMBER 255 ++#define PCI_MAX_DEVICES 32 ++#define PCI_MAX_FUNCTION 8 ++ ++#define PCI_CONF_ADDRESS 0x0CF8 // PCI Configuration Space Address ++#define PCI_CONF_DATA 0x0CFC // PCI Configuration Space Data ++ ++#define PCI_CLASS_BRIDGE_DEV 0x06 ++#define PCI_SUBCLASS_BR_PCI_TO_PCI 0x04 ++ ++#define PCI_CAPABILITY_ID_PCI_EXPRESS 0x10 ++ ++#define U1DONTCARE 0xFF ++#define U2DONTCARE 0xFFFF ++#define U4DONTCARE 0xFFFFFFFF ++ ++#define PCI_VENDER_ID_REALTEK 0x10ec ++ ++#define HAL_HW_PCI_8180_DEVICE_ID 0x8180 ++#define HAL_HW_PCI_8185_DEVICE_ID 0x8185 //8185 or 8185b ++#define HAL_HW_PCI_8188_DEVICE_ID 0x8188 //8185b ++#define HAL_HW_PCI_8198_DEVICE_ID 0x8198 //8185b ++#define HAL_HW_PCI_8190_DEVICE_ID 0x8190 //8190 ++#define HAL_HW_PCI_8723E_DEVICE_ID 0x8723 //8723E ++#define HAL_HW_PCI_8192_DEVICE_ID 0x8192 //8192 PCI-E ++#define HAL_HW_PCI_8192SE_DEVICE_ID 0x8192 //8192 SE ++#define HAL_HW_PCI_8174_DEVICE_ID 0x8174 //8192 SE ++#define HAL_HW_PCI_8173_DEVICE_ID 0x8173 //8191 SE Crab ++#define HAL_HW_PCI_8172_DEVICE_ID 0x8172 //8191 SE RE ++#define HAL_HW_PCI_8171_DEVICE_ID 0x8171 //8191 SE Unicron ++#define HAL_HW_PCI_0045_DEVICE_ID 0x0045 //8190 PCI for Ceraga ++#define HAL_HW_PCI_0046_DEVICE_ID 0x0046 //8190 Cardbus for Ceraga ++#define HAL_HW_PCI_0044_DEVICE_ID 0x0044 //8192e PCIE for Ceraga ++#define HAL_HW_PCI_0047_DEVICE_ID 0x0047 //8192e Express Card for Ceraga ++#define HAL_HW_PCI_700F_DEVICE_ID 0x700F ++#define HAL_HW_PCI_701F_DEVICE_ID 0x701F ++#define HAL_HW_PCI_DLINK_DEVICE_ID 0x3304 ++#define HAL_HW_PCI_8192CET_DEVICE_ID 0x8191 //8192ce ++#define HAL_HW_PCI_8192CE_DEVICE_ID 0x8178 //8192ce ++#define HAL_HW_PCI_8191CE_DEVICE_ID 0x8177 //8192ce ++#define HAL_HW_PCI_8188CE_DEVICE_ID 0x8176 //8192ce ++#define HAL_HW_PCI_8192CU_DEVICE_ID 0x8191 //8192ce ++#define HAL_HW_PCI_8192DE_DEVICE_ID 0x8193 //8192de ++#define HAL_HW_PCI_002B_DEVICE_ID 0x002B //8192de, provided by HW SD ++ ++#define HAL_MEMORY_MAPPED_IO_RANGE_8190PCI 0x1000 //8190 support 16 pages of IO registers ++#define HAL_HW_PCI_REVISION_ID_8190PCI 0x00 ++#define HAL_MEMORY_MAPPED_IO_RANGE_8192PCIE 0x4000 //8192 support 16 pages of IO registers ++#define HAL_HW_PCI_REVISION_ID_8192PCIE 0x01 ++#define HAL_MEMORY_MAPPED_IO_RANGE_8192SE 0x4000 //8192 support 16 pages of IO registers ++#define HAL_HW_PCI_REVISION_ID_8192SE 0x10 ++#define HAL_HW_PCI_REVISION_ID_8192CE 0x1 ++#define HAL_MEMORY_MAPPED_IO_RANGE_8192CE 0x4000 //8192 support 16 pages of IO registers ++#define HAL_HW_PCI_REVISION_ID_8192DE 0x0 ++#define HAL_MEMORY_MAPPED_IO_RANGE_8192DE 0x4000 //8192 support 16 pages of IO registers ++ ++enum pci_bridge_vendor { ++ PCI_BRIDGE_VENDOR_INTEL = 0x0,//0b'0000,0001 ++ PCI_BRIDGE_VENDOR_ATI, //= 0x02,//0b'0000,0010 ++ PCI_BRIDGE_VENDOR_AMD, //= 0x04,//0b'0000,0100 ++ PCI_BRIDGE_VENDOR_SIS ,//= 0x08,//0b'0000,1000 ++ PCI_BRIDGE_VENDOR_UNKNOWN, //= 0x40,//0b'0100,0000 ++ PCI_BRIDGE_VENDOR_MAX ,//= 0x80 ++} ; ++ ++struct rt_pci_capabilities_header { ++ u8 capability_id; ++ u8 next; ++}; ++ ++struct pci_priv{ ++ u8 linkctrl_reg; ++ ++ u8 busnumber; ++ u8 devnumber; ++ u8 funcnumber; ++ ++ u8 pcibridge_busnum; ++ u8 pcibridge_devnum; ++ u8 pcibridge_funcnum; ++ u8 pcibridge_vendor; ++ u16 pcibridge_vendorid; ++ u16 pcibridge_deviceid; ++ u8 pcibridge_pciehdr_offset; ++ u8 pcibridge_linkctrlreg; ++ ++ u8 amd_l1_patch; ++}; ++ ++typedef struct _RT_ISR_CONTENT ++{ ++ union{ ++ u32 IntArray[2]; ++ u32 IntReg4Byte; ++ u16 IntReg2Byte; ++ }; ++}RT_ISR_CONTENT, *PRT_ISR_CONTENT; ++ ++//#define RegAddr(addr) (addr + 0xB2000000UL) ++//some platform macros will def here ++static inline void NdisRawWritePortUlong(u32 port, u32 val) ++{ ++ outl(val, port); ++ //writel(val, (u8 *)RegAddr(port)); ++} ++ ++static inline void NdisRawWritePortUchar(u32 port, u8 val) ++{ ++ outb(val, port); ++ //writeb(val, (u8 *)RegAddr(port)); ++} ++ ++static inline void NdisRawReadPortUchar(u32 port, u8 *pval) ++{ ++ *pval = inb(port); ++ //*pval = readb((u8 *)RegAddr(port)); ++} ++ ++static inline void NdisRawReadPortUshort(u32 port, u16 *pval) ++{ ++ *pval = inw(port); ++ //*pval = readw((u8 *)RegAddr(port)); ++} ++ ++static inline void NdisRawReadPortUlong(u32 port, u32 *pval) ++{ ++ *pval = inl(port); ++ //*pval = readl((u8 *)RegAddr(port)); ++} ++ ++#ifdef CONFIG_RTL8192C ++void rtl8192ce_set_hal_ops(_adapter * padapter); ++#endif ++#ifdef CONFIG_RTL8192D ++void rtl8192de_set_hal_ops(_adapter * padapter); ++#endif ++ ++#endif //__PCIE_HAL_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/pci_ops.h b/drivers/net/wireless/realtek/rtl8192cu/include/pci_ops.h +new file mode 100644 +index 000000000000..51d96c483b0a +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/pci_ops.h +@@ -0,0 +1,60 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __PCI_OPS_H_ ++#define __PCI_OPS_H_ ++ ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_RTL8192C ++u32 rtl8192ce_init_desc_ring(_adapter * padapter); ++u32 rtl8192ce_free_desc_ring(_adapter * padapter); ++void rtl8192ce_reset_desc_ring(_adapter * padapter); ++#ifdef CONFIG_64BIT_DMA ++u8 PlatformEnable92CEDMA64(PADAPTER Adapter); ++#endif ++int rtl8192ce_interrupt(PADAPTER Adapter); ++void rtl8192ce_xmit_tasklet(void *priv); ++void rtl8192ce_recv_tasklet(void *priv); ++void rtl8192ce_prepare_bcn_tasklet(void *priv); ++void rtl8192ce_set_intf_ops(struct _io_ops *pops); ++#define pci_set_intf_ops rtl8192ce_set_intf_ops ++#endif ++ ++#ifdef CONFIG_RTL8192D ++u32 rtl8192de_init_desc_ring(_adapter * padapter); ++u32 rtl8192de_free_desc_ring(_adapter * padapter); ++void rtl8192de_reset_desc_ring(_adapter * padapter); ++#ifdef CONFIG_64BIT_DMA ++u8 PlatformEnable92DEDMA64(PADAPTER Adapter); ++#endif ++int rtl8192de_interrupt(PADAPTER Adapter); ++void rtl8192de_xmit_tasklet(void *priv); ++void rtl8192de_recv_tasklet(void *priv); ++void rtl8192de_prepare_bcn_tasklet(void *priv); ++void rtl8192de_set_intf_ops(struct _io_ops *pops); ++#define pci_set_intf_ops rtl8192de_set_intf_ops ++u32 MpReadPCIDwordDBI8192D(IN PADAPTER Adapter, IN u16 Offset, IN u8 Direct); ++void MpWritePCIDwordDBI8192D(IN PADAPTER Adapter, IN u16 Offset, IN u32 Value, IN u8 Direct); ++#endif ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/pci_osintf.h b/drivers/net/wireless/realtek/rtl8192cu/include/pci_osintf.h +new file mode 100644 +index 000000000000..8d38a533d2ee +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/pci_osintf.h +@@ -0,0 +1,32 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __PCI_OSINTF_H ++#define __PCI_OSINTF_H ++ ++#include ++#include ++#include ++ ++ ++void rtw_pci_disable_aspm(_adapter *padapter); ++void rtw_pci_enable_aspm(_adapter *padapter); ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/recv_osdep.h b/drivers/net/wireless/realtek/rtl8192cu/include/recv_osdep.h +new file mode 100644 +index 000000000000..b39e00b224f0 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/recv_osdep.h +@@ -0,0 +1,57 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RECV_OSDEP_H_ ++#define __RECV_OSDEP_H_ ++ ++#include ++#include ++#include ++ ++ ++extern sint _rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter); ++extern void _rtw_free_recv_priv (struct recv_priv *precvpriv); ++ ++ ++extern s32 rtw_recv_entry(union recv_frame *precv_frame); ++extern int rtw_recv_indicatepkt(_adapter *adapter, union recv_frame *precv_frame); ++extern void rtw_recv_returnpacket(IN _nic_hdl cnxt, IN _pkt *preturnedpkt); ++ ++extern void rtw_hostapd_mlme_rx(_adapter *padapter, union recv_frame *precv_frame); ++extern void rtw_handle_tkip_mic_err(_adapter *padapter,u8 bgroup); ++ ++ ++int rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter); ++void rtw_free_recv_priv (struct recv_priv *precvpriv); ++ ++ ++int rtw_os_recv_resource_init(struct recv_priv *precvpriv, _adapter *padapter); ++int rtw_os_recv_resource_alloc(_adapter *padapter, union recv_frame *precvframe); ++void rtw_os_recv_resource_free(struct recv_priv *precvpriv); ++ ++ ++int rtw_os_recvbuf_resource_alloc(_adapter *padapter, struct recv_buf *precvbuf); ++int rtw_os_recvbuf_resource_free(_adapter *padapter, struct recv_buf *precvbuf); ++ ++void rtw_os_read_port(_adapter *padapter, struct recv_buf *precvbuf); ++ ++void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl); ++ ++ ++#endif // +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_cmd.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_cmd.h +new file mode 100644 +index 000000000000..3a63316e48f3 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_cmd.h +@@ -0,0 +1,152 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192C_CMD_H_ ++#define __RTL8192C_CMD_H_ ++ ++ ++enum cmd_msg_element_id ++{ ++ NONE_CMDMSG_EID, ++ AP_OFFLOAD_EID=0, ++ SET_PWRMODE_EID=1, ++ JOINBSS_RPT_EID=2, ++ RSVD_PAGE_EID=3, ++ RSSI_4_EID = 4, ++ RSSI_SETTING_EID=5, ++ MACID_CONFIG_EID=6, ++ MACID_PS_MODE_EID=7, ++ P2P_PS_OFFLOAD_EID=8, ++ SELECTIVE_SUSPEND_ROF_CMD=9, ++#ifdef CONFIG_WOWLAN ++ H2C_WO_WLAN_CMD = 26, // Wake on Wlan. ++ EXT_MACID_PERIOD_EID = 27, // support macid to 64 ++ MACID64_CONFIG_EID = 28, // support macid to 64 ++#endif // CONFIG_WOWLAN ++ P2P_PS_CTW_CMD_EID=32, ++ H2C_92C_IO_OFFLOAD=44, ++#ifdef CONFIG_WOWLAN ++ KEEP_ALIVE_CONTROL_CMD=48, ++ DISCONNECT_DECISION_CTRL_CMD=49, ++ REMOTE_WAKE_CTRL_CMD=60, ++#endif // CONFIG_WOWLAN ++ H2C_92C_TSF_SYNC=67, ++ H2C_92C_DISABLE_BCN_FUNC=68, ++ H2C_92C_RESET_TSF = 75, ++ H2C_92C_CMD_MAX ++}; ++ ++struct cmd_msg_parm { ++ u8 eid; //element id ++ u8 sz; // sz ++ u8 buf[6]; ++}; ++ ++typedef struct _SETPWRMODE_PARM{ ++ u8 Mode; ++ u8 SmartPS; ++ u8 BcnPassTime; // unit: 100ms ++}SETPWRMODE_PARM, *PSETPWRMODE_PARM; ++ ++#ifdef CONFIG_WOWLAN ++typedef struct _SETWOWLAN_PARM{ ++ u8 mode; ++ u8 gpio_index; ++ u8 gpio_duration; ++ u8 second_mode; ++ u8 reserve; ++}SETWOWLAN_PARM, *PSETWOWLAN_PARM; ++ ++#define FW_WOWLAN_FUN_EN BIT(0) ++#define FW_WOWLAN_PATTERN_MATCH BIT(1) ++#define FW_WOWLAN_MAGIC_PKT BIT(2) ++#define FW_WOWLAN_UNICAST BIT(3) ++#define FW_WOWLAN_ALL_PKT_DROP BIT(4) ++#define FW_WOWLAN_GPIO_ACTIVE BIT(5) ++#define FW_WOWLAN_REKEY_WAKEUP BIT(6) ++#define FW_WOWLAN_DEAUTH_WAKEUP BIT(7) ++ ++#define FW_WOWLAN_GPIO_WAKEUP_EN BIT(0) ++#define FW_FW_PARSE_MAGIC_PKT BIT(1) ++#endif // CONFIG_WOWLAN ++ ++struct H2C_SS_RFOFF_PARAM{ ++ u8 ROFOn; // 1: on, 0:off ++ u16 gpio_period; // unit: 1024 us ++}__attribute__ ((packed)); ++ ++ ++typedef struct JOINBSSRPT_PARM{ ++ u8 OpMode; // RT_MEDIA_STATUS ++}JOINBSSRPT_PARM, *PJOINBSSRPT_PARM; ++ ++typedef struct _RSVDPAGE_LOC{ ++ u8 LocProbeRsp; ++ u8 LocPsPoll; ++ u8 LocNullData; ++}RSVDPAGE_LOC, *PRSVDPAGE_LOC; ++ ++struct P2P_PS_Offload_t { ++ unsigned char Offload_En:1; ++ unsigned char role:1; // 1: Owner, 0: Client ++ unsigned char CTWindow_En:1; ++ unsigned char NoA0_En:1; ++ unsigned char NoA1_En:1; ++ unsigned char AllStaSleep:1; // Only valid in Owner ++ unsigned char discovery:1; ++ unsigned char rsvd:1; ++}; ++ ++struct P2P_PS_CTWPeriod_t { ++ unsigned char CTWPeriod; //TU ++}; ++ ++// host message to firmware cmd ++void rtl8192c_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode); ++void rtl8192c_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus); ++u8 rtl8192c_set_rssi_cmd(_adapter*padapter, u8 *param); ++u8 rtl8192c_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg); ++void rtl8192c_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg); ++u8 rtl8192c_set_FwSelectSuspend_cmd(_adapter*padapter,u8 bfwpoll, u16 period); ++#ifdef CONFIG_P2P ++void rtl8192c_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state); ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_IOL ++typedef struct _IO_OFFLOAD_LOC{ ++ u8 LocCmd; ++}IO_OFFLOAD_LOC, *PIO_OFFLOAD_LOC; ++int rtl8192c_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms); ++#endif //CONFIG_IOL ++ ++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD ++u8 rtl8192c_dis_beacon_fun_cmd(_adapter* padapter); ++#endif // CONFIG_BEACON_DISABLE_OFFLOAD ++ ++ ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++int reset_tsf(PADAPTER Adapter, u8 reset_port ); ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ ++#ifdef CONFIG_WOWLAN ++void rtl8192c_set_wowlan_cmd(_adapter* padapter); ++void SetFwRelatedForWoWLAN8192CU(_adapter* padapter,u8 bHostIsGoingtoSleep); ++#endif // CONFIG_WOWLAN ++ ++#endif // __RTL8192C_CMD_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_dm.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_dm.h +new file mode 100644 +index 000000000000..3c56d49c8d81 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_dm.h +@@ -0,0 +1,515 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192C_DM_H__ ++#define __RTL8192C_DM_H__ ++//============================================================ ++// Description: ++// ++// This file is for 92CE/92CU dynamic mechanism only ++// ++// ++//============================================================ ++ ++#define RSSI_CCK 0 ++#define RSSI_OFDM 1 ++#define RSSI_DEFAULT 2 ++ ++//============================================================ ++// structure and define ++//============================================================ ++ ++typedef struct _FALSE_ALARM_STATISTICS{ ++ u32 Cnt_Parity_Fail; ++ u32 Cnt_Rate_Illegal; ++ u32 Cnt_Crc8_fail; ++ u32 Cnt_Mcs_fail; ++ u32 Cnt_Ofdm_fail; ++ u32 Cnt_Cck_fail; ++ u32 Cnt_all; ++ u32 Cnt_Fast_Fsync; ++ u32 Cnt_SB_Search_fail; ++}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; ++ ++typedef struct _Dynamic_Power_Saving_ ++{ ++ u8 PreCCAState; ++ u8 CurCCAState; ++ ++ u8 PreRFState; ++ u8 CurRFState; ++ ++ s32 Rssi_val_min; ++ ++}PS_T; ++ ++typedef struct _Dynamic_Initial_Gain_Threshold_ ++{ ++ u8 Dig_Enable_Flag; ++ u8 Dig_Ext_Port_Stage; ++ ++ int RssiLowThresh; ++ int RssiHighThresh; ++ ++ u32 FALowThresh; ++ u32 FAHighThresh; ++ ++ u8 CurSTAConnectState; ++ u8 PreSTAConnectState; ++ u8 CurMultiSTAConnectState; ++ ++ u8 PreIGValue; ++ u8 CurIGValue; ++ u8 BackupIGValue; ++ ++ char BackoffVal; ++ char BackoffVal_range_max; ++ char BackoffVal_range_min; ++ u8 rx_gain_range_max; ++ u8 rx_gain_range_min; ++ u8 Rssi_val_min; ++ ++ u8 PreCCKPDState; ++ u8 CurCCKPDState; ++ u8 PreCCKFAState; ++ u8 CurCCKFAState; ++ u8 PreCCAState; ++ u8 CurCCAState; ++ ++ u8 LargeFAHit; ++ u8 ForbiddenIGI; ++ u32 Recover_cnt; ++ u8 rx_gain_range_min_nolink; ++ ++}DIG_T; ++ ++typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition ++{ ++ DIG_TYPE_THRESH_HIGH = 0, ++ DIG_TYPE_THRESH_LOW = 1, ++ DIG_TYPE_BACKOFF = 2, ++ DIG_TYPE_RX_GAIN_MIN = 3, ++ DIG_TYPE_RX_GAIN_MAX = 4, ++ DIG_TYPE_ENABLE = 5, ++ DIG_TYPE_DISABLE = 6, ++ DIG_OP_TYPE_MAX ++}DM_DIG_OP_E; ++ ++typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition ++{ ++ CCK_PD_STAGE_LowRssi = 0, ++ CCK_PD_STAGE_HighRssi = 1, ++ CCK_PD_STAGE_MAX = 3, ++}DM_CCK_PDTH_E; ++ ++typedef enum tag_1R_CCA_Type_Definition ++{ ++ CCA_1R =0, ++ CCA_2R = 1, ++ CCA_MAX = 2, ++}DM_1R_CCA_E; ++ ++typedef enum tag_RF_Type_Definition ++{ ++ RF_Save =0, ++ RF_Normal = 1, ++ RF_MAX = 2, ++}DM_RF_E; ++ ++typedef enum tag_DIG_EXT_PORT_ALGO_Definition ++{ ++ DIG_EXT_PORT_STAGE_0 = 0, ++ DIG_EXT_PORT_STAGE_1 = 1, ++ DIG_EXT_PORT_STAGE_2 = 2, ++ DIG_EXT_PORT_STAGE_3 = 3, ++ DIG_EXT_PORT_STAGE_MAX = 4, ++}DM_DIG_EXT_PORT_ALG_E; ++ ++ ++typedef enum tag_DIG_Connect_Definition ++{ ++ DIG_STA_DISCONNECT = 0, ++ DIG_STA_CONNECT = 1, ++ DIG_STA_BEFORE_CONNECT = 2, ++ DIG_MultiSTA_DISCONNECT = 3, ++ DIG_MultiSTA_CONNECT = 4, ++ DIG_CONNECT_MAX ++}DM_DIG_CONNECT_E; ++ ++ ++ ++typedef enum _BT_Ant_NUM{ ++ Ant_x2 = 0, ++ Ant_x1 = 1 ++} BT_Ant_NUM, *PBT_Ant_NUM; ++ ++typedef enum _BT_CoType{ ++ BT_2Wire = 0, ++ BT_ISSC_3Wire = 1, ++ BT_Accel = 2, ++ BT_CSR_BC4 = 3, ++ BT_CSR_BC8 = 4, ++ BT_RTL8756 = 5, ++} BT_CoType, *PBT_CoType; ++ ++typedef enum _BT_CurState{ ++ BT_OFF = 0, ++ BT_ON = 1, ++} BT_CurState, *PBT_CurState; ++ ++typedef enum _BT_ServiceType{ ++ BT_SCO = 0, ++ BT_A2DP = 1, ++ BT_HID = 2, ++ BT_HID_Idle = 3, ++ BT_Scan = 4, ++ BT_Idle = 5, ++ BT_OtherAction = 6, ++ BT_Busy = 7, ++ BT_OtherBusy = 8, ++ BT_PAN = 9, ++} BT_ServiceType, *PBT_ServiceType; ++ ++typedef enum _BT_RadioShared{ ++ BT_Radio_Shared = 0, ++ BT_Radio_Individual = 1, ++} BT_RadioShared, *PBT_RadioShared; ++ ++struct btcoexist_priv { ++ u8 BT_Coexist; ++ u8 BT_Ant_Num; ++ u8 BT_CoexistType; ++ u8 BT_State; ++ u8 BT_CUR_State; //0:on, 1:off ++ u8 BT_Ant_isolation; //0:good, 1:bad ++ u8 BT_PapeCtrl; //0:SW, 1:SW/HW dynamic ++ u8 BT_Service; ++ u8 BT_Ampdu; // 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. ++ u8 BT_RadioSharedType; ++ u32 Ratio_Tx; ++ u32 Ratio_PRI; ++ u8 BtRfRegOrigin1E; ++ u8 BtRfRegOrigin1F; ++ u8 BtRssiState; ++ u32 BtEdcaUL; ++ u32 BtEdcaDL; ++ u32 BT_EDCA[2]; ++ u8 bCOBT; ++ ++ u8 bInitSet; ++ u8 bBTBusyTraffic; ++ u8 bBTTrafficModeSet; ++ u8 bBTNonTrafficModeSet; ++ //BTTraffic BT21TrafficStatistics; ++ u32 CurrentState; ++ u32 PreviousState; ++ u8 BtPreRssiState; ++ u8 bFWCoexistAllOff; ++ u8 bSWCoexistAllOff; ++}; ++ ++#define BW_AUTO_SWITCH_HIGH_LOW 25 ++#define BW_AUTO_SWITCH_LOW_HIGH 30 ++ ++#define DM_DIG_THRESH_HIGH 40 ++#define DM_DIG_THRESH_LOW 35 ++ ++#define DM_FALSEALARM_THRESH_LOW 400 ++#define DM_FALSEALARM_THRESH_HIGH 1000 ++ ++#define DM_DIG_MAX 0x3e ++#define DM_DIG_MIN 0x1e //0x22//0x1c ++ ++#define DM_DIG_FA_UPPER 0x3e ++#define DM_DIG_FA_LOWER 0x20 ++#define DM_DIG_FA_TH0 0x20 ++#define DM_DIG_FA_TH1 0x100 ++#define DM_DIG_FA_TH2 0x200 ++ ++#define DM_DIG_BACKOFF_MAX 12 ++#define DM_DIG_BACKOFF_MIN (-4) ++#define DM_DIG_BACKOFF_DEFAULT 10 ++ ++#define RxPathSelection_SS_TH_low 30 ++#define RxPathSelection_diff_TH 18 ++ ++#define DM_RATR_STA_INIT 0 ++#define DM_RATR_STA_HIGH 1 ++#define DM_RATR_STA_MIDDLE 2 ++#define DM_RATR_STA_LOW 3 ++ ++#define CTSToSelfTHVal 30 ++#define RegC38_TH 20 ++ ++#define WAIotTHVal 25 ++ ++//Dynamic Tx Power Control Threshold ++#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74 ++#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67 ++ ++#define TxHighPwrLevel_Normal 0 ++#define TxHighPwrLevel_Level1 1 ++#define TxHighPwrLevel_Level2 2 ++#define TxHighPwrLevel_BT1 3 ++#define TxHighPwrLevel_BT2 4 ++#define TxHighPwrLevel_15 5 ++#define TxHighPwrLevel_35 6 ++#define TxHighPwrLevel_50 7 ++#define TxHighPwrLevel_70 8 ++#define TxHighPwrLevel_100 9 ++ ++#define DM_Type_ByFW 0 ++#define DM_Type_ByDriver 1 ++ ++ ++typedef struct _RATE_ADAPTIVE ++{ ++ u8 RateAdaptiveDisabled; ++ u8 RATRState; ++ u16 reserve; ++ ++ u32 HighRSSIThreshForRA; ++ u32 High2LowRSSIThreshForRA; ++ u8 Low2HighRSSIThreshForRA40M; ++ u32 LowRSSIThreshForRA40M; ++ u8 Low2HighRSSIThreshForRA20M; ++ u32 LowRSSIThreshForRA20M; ++ u32 UpperRSSIThresholdRATR; ++ u32 MiddleRSSIThresholdRATR; ++ u32 LowRSSIThresholdRATR; ++ u32 LowRSSIThresholdRATR40M; ++ u32 LowRSSIThresholdRATR20M; ++ u8 PingRSSIEnable; //cosa add for Netcore long range ping issue ++ u32 PingRSSIRATR; //cosa add for Netcore long range ping issue ++ u32 PingRSSIThreshForRA;//cosa add for Netcore long range ping issue ++ u32 LastRATR; ++ u8 PreRATRState; ++ ++} RATE_ADAPTIVE, *PRATE_ADAPTIVE; ++ ++typedef enum tag_SW_Antenna_Switch_Definition ++{ ++ Antenna_B = 1, ++ Antenna_A = 2, ++ Antenna_MAX = 3, ++}DM_SWAS_E; ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++// This indicates two different the steps. ++// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. ++// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK ++// with original RSSI to determine if it is necessary to switch antenna. ++#define SWAW_STEP_PEAK 0 ++#define SWAW_STEP_DETERMINE 1 ++ ++#define TP_MODE 0 ++#define RSSI_MODE 1 ++#define TRAFFIC_LOW 0 ++#define TRAFFIC_HIGH 1 ++ ++typedef struct _SW_Antenna_Switch_ ++{ ++ u8 try_flag; ++ s32 PreRSSI; ++ u8 CurAntenna; ++ u8 PreAntenna; ++ u8 RSSI_Trying; ++ u8 TestMode; ++ u8 bTriggerAntennaSwitch; ++ u8 SelectAntennaMap; ++ // Before link Antenna Switch check ++ u8 SWAS_NoLink_State; ++ ++}SWAT_T; ++ ++ ++#endif ++ ++ ++struct dm_priv ++{ ++ u8 DM_Type; ++ u8 DMFlag, DMFlag_tmp; ++ ++ ++ //for DIG ++ u8 bDMInitialGainEnable; ++ u8 binitialized; // for dm_initial_gain_Multi_STA use. ++ DIG_T DM_DigTable; ++ ++ PS_T DM_PSTable; ++ ++ FALSE_ALARM_STATISTICS FalseAlmCnt; ++ ++ //for rate adaptive, in fact, 88c/92c fw will handle this ++ u8 bUseRAMask; ++ RATE_ADAPTIVE RateAdaptive; ++ ++ //* Upper and Lower Signal threshold for Rate Adaptive*/ ++ int UndecoratedSmoothedPWDB; ++ int UndecoratedSmoothedCCK; ++ int EntryMinUndecoratedSmoothedPWDB; ++ int EntryMaxUndecoratedSmoothedPWDB; ++ ++ ++ //for High Power ++ u8 bDynamicTxPowerEnable; ++ u8 LastDTPLvl; ++ u8 DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06 ++ ++ //for tx power tracking ++ //u8 bTXPowerTracking; ++ u8 TXPowercount; ++ u8 bTXPowerTrackingInit; ++ u8 TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default ++ u8 TM_Trigger; ++ ++ u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1 ++ u8 ThermalValue; ++ u8 ThermalValue_LCK; ++ u8 ThermalValue_IQK; ++ u8 ThermalValue_DPK; ++ ++ u8 bRfPiEnable; ++ ++ //for APK ++ u32 APKoutput[2][2]; //path A/B; output1_1a/output1_2a ++ u8 bAPKdone; ++ u8 bAPKThermalMeterIgnore; ++ u8 bDPdone; ++ u8 bDPPathAOK; ++ u8 bDPPathBOK; ++ ++ //for IQK ++ u32 RegC04; ++ u32 Reg874; ++ u32 RegC08; ++ u32 RegB68; ++ u32 RegB6C; ++ u32 Reg870; ++ u32 Reg860; ++ u32 Reg864; ++ u32 ADDA_backup[IQK_ADDA_REG_NUM]; ++ u32 IQK_MAC_backup[IQK_MAC_REG_NUM]; ++ u32 IQK_BB_backup_recover[9]; ++ u32 IQK_BB_backup[IQK_BB_REG_NUM]; ++ u8 PowerIndex_backup[6]; ++ ++ u8 bCCKinCH14; ++ ++ char CCK_index; ++ char OFDM_index[2]; ++ ++ BOOLEAN bDoneTxpower; ++ char CCK_index_HP; ++ char OFDM_index_HP[2]; ++ u8 ThermalValue_HP[HP_THERMAL_NUM]; ++ u8 ThermalValue_HP_index; ++ ++ //for TxPwrTracking ++ int RegE94; ++ int RegE9C; ++ int RegEB4; ++ int RegEBC; ++ ++ u32 TXPowerTrackingCallbackCnt; //cosa add for debug ++ ++ u32 prv_traffic_idx; // edca turbo ++ ++ // for dm_RF_Saving ++ u8 initialize; ++ u32 rf_saving_Reg874; ++ u32 rf_saving_RegC70; ++ u32 rf_saving_Reg85C; ++ u32 rf_saving_RegA74; ++ ++ //for Antenna diversity ++#ifdef CONFIG_ANTENNA_DIVERSITY ++ SWAT_T DM_SWAT_Table; ++#endif ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ _timer SwAntennaSwitchTimer; ++ ++ u64 lastTxOkCnt; ++ u64 lastRxOkCnt; ++ u64 TXByteCnt_A; ++ u64 TXByteCnt_B; ++ u64 RXByteCnt_A; ++ u64 RXByteCnt_B; ++ u8 DoubleComfirm; ++ u8 TrafficLoad; ++#endif ++ ++ s32 OFDM_Pkt_Cnt; ++ u8 RSSI_Select; ++ u8 DIG_Dynamic_MIN ; ++ ++ // Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas ++ u8 INIDATA_RATE[32]; ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ /* Ported from ODM, for ESTI Adaptivity test */ ++ s8 TH_L2H_ini; ++ s8 TH_EDCCA_HL_diff; ++ s8 IGI_Base; ++ u8 IGI_target; ++ bool ForceEDCCA; ++ u8 AdapEn_RSSI; ++ s8 Force_TH_H; ++ s8 Force_TH_L; ++ u8 IGI_LowerBound; ++ ++ bool bPreEdccaEnable; ++#endif ++}; ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export Marco Definition---------------------------*/ ++//#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;} ++ ++ ++//============================================================ ++// function prototype ++//============================================================ ++void rtl8192c_init_dm_priv(IN PADAPTER Adapter); ++void rtl8192c_deinit_dm_priv(IN PADAPTER Adapter); ++void rtl8192c_InitHalDm(IN PADAPTER Adapter); ++void rtl8192c_HalDmWatchDog(IN PADAPTER Adapter); ++ ++VOID rtl8192c_dm_CheckTXPowerTracking(IN PADAPTER Adapter); ++ ++void rtl8192c_dm_RF_Saving(IN PADAPTER pAdapter, IN u8 bForceInNormal); ++ ++#ifdef CONFIG_BT_COEXIST ++void rtl8192c_set_dm_bt_coexist(_adapter *padapter, u8 bStart); ++void rtl8192c_issue_delete_ba(_adapter *padapter, u8 dir); ++#endif ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++void SwAntDivRSSICheck8192C(_adapter *padapter ,u32 RxPWDBAll); ++void SwAntDivRestAfterLink8192C(IN PADAPTER Adapter); ++#endif ++#ifdef CONFIG_ANTENNA_DIVERSITY ++void SwAntDivCompare8192C(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src); ++u8 SwAntDivBeforeLink8192C(IN PADAPTER Adapter); ++#endif ++ ++#endif //__HAL8190PCIDM_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_event.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_event.h +new file mode 100644 +index 000000000000..ddc08bffe4d4 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_event.h +@@ -0,0 +1,26 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192C_EVENT_H_ ++#define _RTL8192C_EVENT_H_ ++ ++ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_hal.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_hal.h +new file mode 100644 +index 000000000000..c80313909b75 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_hal.h +@@ -0,0 +1,934 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192C_HAL_H__ ++#define __RTL8192C_HAL_H__ ++ ++#include "hal_com.h" ++#include "rtl8192c_spec.h" ++#include "Hal8192CPhyReg.h" ++#include "Hal8192CPhyCfg.h" ++#include "rtl8192c_rf.h" ++#include "rtl8192c_dm.h" ++#include "rtl8192c_recv.h" ++#include "rtl8192c_xmit.h" ++#include "rtl8192c_cmd.h" ++#ifdef DBG_CONFIG_ERROR_DETECT ++#include "rtl8192c_sreset.h" ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ ++ #include "Hal8192CEHWImg.h" ++ ++ #define RTL819X_DEFAULT_RF_TYPE RF_2T2R ++ //#define RTL819X_DEFAULT_RF_TYPE RF_1T2R ++ #define RTL819X_TOTAL_RF_PATH 2 ++ ++ //2TODO: The following need to check!! ++ #define RTL8192C_FW_TSMC_IMG "rtl8192CE\\rtl8192cfwT.bin" ++ #define RTL8192C_FW_UMC_IMG "rtl8192CE\\rtl8192cfwU.bin" ++ #define RTL8192C_FW_UMC_B_IMG "rtl8192CE\\rtl8192cfwU_B.bin" ++ ++ #define RTL8188C_PHY_REG "rtl8192CE\\PHY_REG_1T.txt" ++ #define RTL8188C_PHY_RADIO_A "rtl8192CE\\radio_a_1T.txt" ++ #define RTL8188C_PHY_RADIO_B "rtl8192CE\\radio_b_1T.txt" ++ #define RTL8188C_AGC_TAB "rtl8192CE\\AGC_TAB_1T.txt" ++ #define RTL8188C_PHY_MACREG "rtl8192CE\\MACREG_1T.txt" ++ ++ #define RTL8192C_PHY_REG "rtl8192CE\\PHY_REG_2T.txt" ++ #define RTL8192C_PHY_RADIO_A "rtl8192CE\\radio_a_2T.txt" ++ #define RTL8192C_PHY_RADIO_B "rtl8192CE\\radio_b_2T.txt" ++ #define RTL8192C_AGC_TAB "rtl8192CE\\AGC_TAB_2T.txt" ++ #define RTL8192C_PHY_MACREG "rtl8192CE\\MACREG_2T.txt" ++ ++ #define RTL819X_PHY_MACPHY_REG "rtl8192CE\\MACPHY_reg.txt" ++ #define RTL819X_PHY_MACPHY_REG_PG "rtl8192CE\\MACPHY_reg_PG.txt" ++ #define RTL819X_PHY_MACREG "rtl8192CE\\MAC_REG.txt" ++ #define RTL819X_PHY_REG "rtl8192CE\\PHY_REG.txt" ++ #define RTL819X_PHY_REG_1T2R "rtl8192CE\\PHY_REG_1T2R.txt" ++ #define RTL819X_PHY_REG_to1T1R "rtl8192CE\\phy_to1T1R_a.txt" ++ #define RTL819X_PHY_REG_to1T2R "rtl8192CE\\phy_to1T2R.txt" ++ #define RTL819X_PHY_REG_to2T2R "rtl8192CE\\phy_to2T2R.txt" ++ #define RTL819X_PHY_REG_PG "rtl8192CE\\PHY_REG_PG.txt" ++ #define RTL819X_AGC_TAB "rtl8192CE\\AGC_TAB.txt" ++ #define RTL819X_PHY_RADIO_A "rtl8192CE\\radio_a.txt" ++ #define RTL819X_PHY_RADIO_A_1T "rtl8192CE\\radio_a_1t.txt" ++ #define RTL819X_PHY_RADIO_A_2T "rtl8192CE\\radio_a_2t.txt" ++ #define RTL819X_PHY_RADIO_B "rtl8192CE\\radio_b.txt" ++ #define RTL819X_PHY_RADIO_B_GM "rtl8192CE\\radio_b_gm.txt" ++ #define RTL819X_PHY_RADIO_C "rtl8192CE\\radio_c.txt" ++ #define RTL819X_PHY_RADIO_D "rtl8192CE\\radio_d.txt" ++ #define RTL819X_EEPROM_MAP "rtl8192CE\\8192ce.map" ++ #define RTL819X_EFUSE_MAP "rtl8192CE\\8192ce.map" ++ ++//--------------------------------------------------------------------- ++// RTL8723E From file ++//--------------------------------------------------------------------- ++ #define RTL8723_FW_UMC_IMG "rtl8723E\\rtl8723fw.bin" ++ #define RTL8723_PHY_REG "rtl8723E\\PHY_REG_1T.txt" ++ #define RTL8723_PHY_RADIO_A "rtl8723E\\radio_a_1T.txt" ++ #define RTL8723_PHY_RADIO_B "rtl8723E\\radio_b_1T.txt" ++ #define RTL8723_AGC_TAB "rtl8723E\\AGC_TAB_1T.txt" ++ #define RTL8723_PHY_MACREG "rtl8723E\\MAC_REG.txt" ++ #define RTL8723_PHY_MACREG "rtl8723E\\MAC_REG.txt" ++ #define RTL8723_PHY_REG_PG "rtl8723E\\PHY_REG_PG.txt" ++ #define RTL8723_PHY_REG_MP "rtl8723E\\PHY_REG_MP.txt" ++ ++ // The file name "_2T" is for 92CE, "_1T" is for 88CE. Modified by tynli. 2009.11.24. ++ #define Rtl819XFwTSMCImageArray Rtl8192CEFwTSMCImgArray ++ #define Rtl819XFwUMCACutImageArray Rtl8192CEFwUMCACutImgArray ++ #define Rtl819XFwUMCBCutImageArray Rtl8192CEFwUMCBCutImgArray ++ ++ #define Rtl8723FwUMCImageArray Rtl8192CEFwUMC8723ImgArray ++ #define Rtl819XMAC_Array Rtl8192CEMAC_2T_Array ++ #define Rtl819XAGCTAB_2TArray Rtl8192CEAGCTAB_2TArray ++ #define Rtl819XAGCTAB_1TArray Rtl8192CEAGCTAB_1TArray ++ #define Rtl819XPHY_REG_2TArray Rtl8192CEPHY_REG_2TArray ++ #define Rtl819XPHY_REG_1TArray Rtl8192CEPHY_REG_1TArray ++ #define Rtl819XRadioA_2TArray Rtl8192CERadioA_2TArray ++ #define Rtl819XRadioA_1TArray Rtl8192CERadioA_1TArray ++ #define Rtl819XRadioB_2TArray Rtl8192CERadioB_2TArray ++ #define Rtl819XRadioB_1TArray Rtl8192CERadioB_1TArray ++ #define Rtl819XPHY_REG_Array_PG Rtl8192CEPHY_REG_Array_PG ++ #define Rtl819XPHY_REG_Array_MP Rtl8192CEPHY_REG_Array_MP ++ ++#elif defined(CONFIG_USB_HCI) ++ ++ #include "Hal8192CUHWImg.h" ++#ifdef CONFIG_WOWLAN ++ #include "Hal8192CUHWImg_wowlan.h" ++#endif //CONFIG_WOWLAN ++ //2TODO: We should define 8192S firmware related macro settings here!! ++ #define RTL819X_DEFAULT_RF_TYPE RF_1T2R ++ #define RTL819X_TOTAL_RF_PATH 2 ++ ++ //TODO: The following need to check!! ++ #define RTL8192C_FW_TSMC_IMG "rtl8192CU\\rtl8192cfwT.bin" ++ #define RTL8192C_FW_UMC_IMG "rtl8192CU\\rtl8192cfwU.bin" ++ #define RTL8192C_FW_UMC_B_IMG "rtl8192CU\\rtl8192cfwU_B.bin" ++#ifdef CONFIG_WOWLAN ++ #define RTL8192C_FW_TSMC_WW_IMG "rtl8192CU\\rtl8192cfwTww.bin" ++ #define RTL8192C_FW_UMC_WW_IMG "rtl8192CU\\rtl8192cfwUww.bin" ++ #define RTL8192C_FW_UMC_B_WW_IMG "rtl8192CU\\rtl8192cfwU_Bww.bin" ++#endif // CONFIG_WOWLAN ++ //#define RTL819X_FW_BOOT_IMG "rtl8192CU\\boot.img" ++ //#define RTL819X_FW_MAIN_IMG "rtl8192CU\\main.img" ++ //#define RTL819X_FW_DATA_IMG "rtl8192CU\\data.img" ++ ++ #define RTL8188C_PHY_REG "rtl8188CU\\PHY_REG.txt" ++ #define RTL8188C_PHY_RADIO_A "rtl8188CU\\radio_a.txt" ++ #define RTL8188C_PHY_RADIO_B "rtl8188CU\\radio_b.txt" ++ #define RTL8188C_PHY_RADIO_A_mCard "rtl8192CU\\radio_a_1T_mCard.txt" ++ #define RTL8188C_PHY_RADIO_B_mCard "rtl8192CU\\radio_b_1T_mCard.txt" ++ #define RTL8188C_PHY_RADIO_A_HP "rtl8192CU\\radio_a_1T_HP.txt" ++ #define RTL8188C_AGC_TAB "rtl8188CU\\AGC_TAB.txt" ++ #define RTL8188C_PHY_MACREG "rtl8188CU\\MACREG.txt" ++ ++ #define RTL8192C_PHY_REG "rtl8192CU\\PHY_REG.txt" ++ #define RTL8192C_PHY_RADIO_A "rtl8192CU\\radio_a.txt" ++ #define RTL8192C_PHY_RADIO_B "rtl8192CU\\radio_b.txt" ++ #define RTL8192C_AGC_TAB "rtl8192CU\\AGC_TAB.txt" ++ #define RTL8192C_PHY_MACREG "rtl8192CU\\MACREG.txt" ++ ++ #define RTL819X_PHY_REG_PG "rtl8192CU\\PHY_REG_PG.txt" ++ ++//--------------------------------------------------------------------- ++// RTL8723U From file ++//--------------------------------------------------------------------- ++ #define RTL8723_FW_UMC_IMG "rtl8723U\\rtl8723fw.bin" ++ #define RTL8723_PHY_REG "rtl8723U\\PHY_REG_1T.txt" ++ #define RTL8723_PHY_RADIO_A "rtl8723U\\radio_a_1T.txt" ++ #define RTL8723_PHY_RADIO_B "rtl8723U\\radio_b_1T.txt" ++ #define RTL8723_AGC_TAB "rtl8723U\\AGC_TAB_1T.txt" ++ #define RTL8723_PHY_MACREG "rtl8723U\\MAC_REG.txt" ++ #define RTL8723_PHY_MACREG "rtl8723U\\MAC_REG.txt" ++ #define RTL8723_PHY_REG_PG "rtl8723U\\PHY_REG_PG.txt" ++ #define RTL8723_PHY_REG_MP "rtl8723U\\PHY_REG_MP.txt" ++ ++ // The file name "_2T" is for 92CU, "_1T" is for 88CU. Modified by tynli. 2009.11.24. ++ #define Rtl819XFwImageArray Rtl8192CUFwTSMCImgArray ++ #define Rtl819XFwTSMCImageArray Rtl8192CUFwTSMCImgArray ++ #define Rtl819XFwUMCACutImageArray Rtl8192CUFwUMCACutImgArray ++ #define Rtl819XFwUMCBCutImageArray Rtl8192CUFwUMCBCutImgArray ++#ifdef CONFIG_WOWLAN ++ #define Rtl8192C_FwTSMCWWImageArray Rtl8192CUFwTSMCWWImgArray ++ #define Rtl8192C_FwUMCWWImageArray Rtl8192CUFwUMCACutWWImgArray ++ #define Rtl8192C_FwUMCBCutWWImageArray Rtl8192CUFwUMCBCutWWImgArray ++#endif //CONFIG_WOWLAN ++ #define Rtl819XMAC_Array Rtl8192CUMAC_2T_Array ++ #define Rtl819XAGCTAB_2TArray Rtl8192CUAGCTAB_2TArray ++ #define Rtl819XAGCTAB_1TArray Rtl8192CUAGCTAB_1TArray ++ #define Rtl819XAGCTAB_1T_HPArray Rtl8192CUAGCTAB_1T_HPArray ++ #define Rtl819XPHY_REG_2TArray Rtl8192CUPHY_REG_2TArray ++ #define Rtl819XPHY_REG_1TArray Rtl8192CUPHY_REG_1TArray ++ #define Rtl819XPHY_REG_1T_mCardArray Rtl8192CUPHY_REG_1T_mCardArray ++ #define Rtl819XPHY_REG_2T_mCardArray Rtl8192CUPHY_REG_2T_mCardArray ++ #define Rtl819XPHY_REG_1T_HPArray Rtl8192CUPHY_REG_1T_HPArray ++ #define Rtl819XRadioA_2TArray Rtl8192CURadioA_2TArray ++ #define Rtl819XRadioA_1TArray Rtl8192CURadioA_1TArray ++ #define Rtl819XRadioA_1T_mCardArray Rtl8192CURadioA_1T_mCardArray ++ #define Rtl819XRadioB_2TArray Rtl8192CURadioB_2TArray ++ #define Rtl819XRadioB_1TArray Rtl8192CURadioB_1TArray ++ #define Rtl819XRadioB_1T_mCardArray Rtl8192CURadioB_1T_mCardArray ++ #define Rtl819XRadioA_1T_HPArray Rtl8192CURadioA_1T_HPArray ++ #define Rtl819XPHY_REG_Array_PG Rtl8192CUPHY_REG_Array_PG ++ #define Rtl819XPHY_REG_Array_PG_mCard Rtl8192CUPHY_REG_Array_PG_mCard ++ #define Rtl819XPHY_REG_Array_PG_HP Rtl8192CUPHY_REG_Array_PG_HP ++ #define Rtl819XPHY_REG_Array_MP Rtl8192CUPHY_REG_Array_MP ++#endif ++ ++#define DRVINFO_SZ 4 // unit is 8bytes ++#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0)) ++ ++#define FW_8192C_SIZE 16384+32//16k ++#define FW_8192C_START_ADDRESS 0x1000 ++//#define FW_8192C_END_ADDRESS 0x3FFF //Filen said this is for test chip ++#define FW_8192C_END_ADDRESS 0x1FFF ++ ++#define MAX_PAGE_SIZE 4096 // @ page : 4k bytes ++ ++#define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300) ++ ++typedef enum _FIRMWARE_SOURCE{ ++ FW_SOURCE_IMG_FILE = 0, ++ FW_SOURCE_HEADER_FILE = 1, //from header file ++}FIRMWARE_SOURCE, *PFIRMWARE_SOURCE; ++ ++typedef struct _RT_FIRMWARE{ ++ FIRMWARE_SOURCE eFWSource; ++ u8* szFwBuffer; ++ u32 ulFwLength; ++#ifdef CONFIG_WOWLAN ++ u8* szWoWLANFwBuffer; ++ u32 ulWoWLANFwLength; ++#endif //CONFIG_WOWLAN ++}RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_92C, *PRT_FIRMWARE_92C; ++ ++// ++// This structure must be cared byte-ordering ++// ++// Added by tynli. 2009.12.04. ++typedef struct _RT_8192C_FIRMWARE_HDR {//8-byte alinment required ++ ++ //--- LONG WORD 0 ---- ++ u16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut ++ u8 Category; // AP/NIC and USB/PCI ++ u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions ++ u16 Version; // FW Version ++ u8 Subversion; // FW Subversion, default 0x00 ++ u16 Rsvd1; ++ ++ ++ //--- LONG WORD 1 ---- ++ u8 Month; // Release time Month field ++ u8 Date; // Release time Date field ++ u8 Hour; // Release time Hour field ++ u8 Minute; // Release time Minute field ++ u16 RamCodeSize; // The size of RAM code ++ u16 Rsvd2; ++ ++ //--- LONG WORD 2 ---- ++ u32 SvnIdx; // The SVN entry index ++ u32 Rsvd3; ++ ++ //--- LONG WORD 3 ---- ++ u32 Rsvd4; ++ u32 Rsvd5; ++ ++}RT_8192C_FIRMWARE_HDR, *PRT_8192C_FIRMWARE_HDR; ++ ++#define DRIVER_EARLY_INT_TIME 0x05 ++#define BCN_DMA_ATIME_INT_TIME 0x02 ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ ++typedef enum _USB_RX_AGG_MODE{ ++ USB_RX_AGG_DISABLE, ++ USB_RX_AGG_DMA, ++ USB_RX_AGG_USB, ++ USB_RX_AGG_MIX ++}USB_RX_AGG_MODE; ++ ++#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer ++ ++#endif ++ ++ ++#define TX_SELE_HQ BIT(0) // High Queue ++#define TX_SELE_LQ BIT(1) // Low Queue ++#define TX_SELE_NQ BIT(2) // Normal Queue ++ ++ ++// Note: We will divide number of page equally for each queue other than public queue! ++ ++#define TX_TOTAL_PAGE_NUMBER 0xF8 ++#define TX_PAGE_BOUNDARY (TX_TOTAL_PAGE_NUMBER + 1) ++ ++// For Normal Chip Setting ++// (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER ++#define NORMAL_PAGE_NUM_PUBQ 0xE7 ++#define NORMAL_PAGE_NUM_HPQ 0x0C ++#define NORMAL_PAGE_NUM_LPQ 0x02 ++#define NORMAL_PAGE_NUM_NPQ 0x02 ++ ++ ++// For Test Chip Setting ++// (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER ++#define TEST_PAGE_NUM_PUBQ 0x7E ++ ++ ++// For Test Chip Setting ++#define WMM_TEST_TX_TOTAL_PAGE_NUMBER 0xF5 ++#define WMM_TEST_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6 ++ ++#define WMM_TEST_PAGE_NUM_PUBQ 0xA3 ++#define WMM_TEST_PAGE_NUM_HPQ 0x29 ++#define WMM_TEST_PAGE_NUM_LPQ 0x29 ++ ++ ++//Note: For Normal Chip Setting ,modify later ++#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER 0xF5 ++#define WMM_NORMAL_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6 ++ ++#define WMM_NORMAL_PAGE_NUM_PUBQ 0x65 ++#define WMM_NORMAL_PAGE_NUM_HPQ 0x30 ++#define WMM_NORMAL_PAGE_NUM_LPQ 0x30 ++#define WMM_NORMAL_PAGE_NUM_NPQ 0x30 ++ ++//------------------------------------------------------------------------- ++// Chip specific ++//------------------------------------------------------------------------- ++#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3) ++#define CHIP_BONDING_92C_1T2R 0x1 ++#define CHIP_BONDING_88C_USB_MCARD 0x2 ++#define CHIP_BONDING_88C_USB_HP 0x1 ++ ++// ++// 2011.01.06. Define new structure of chip version for RTL8723 and so on. Added by tynli. ++// ++/* ++ | BIT15:12 | BIT11:8 | BIT 7 | BIT6:4 | BIT3 | BIT2:0 | ++ |-------------+-----------+-----------+-------+-----------+-------| ++ | IC version(CUT) | ROM version | Manufacturer | RF type | Chip type | IC Type | ++ | | | TSMC/UMC | | TEST/NORMAL| | ++*/ ++// [15:12] IC version(CUT): A-cut=0, B-cut=1, C-cut=2, D-cut=3 ++// [7] Manufacturer: TSMC=0, UMC=1 ++// [6:4] RF type: 1T1R=0, 1T2R=1, 2T2R=2 ++// [3] Chip type: TEST=0, NORMAL=1 ++// [2:0] IC type: 81xxC=0, 8723=1, 92D=2 ++ ++#define CHIP_8723 BIT(0) ++#define CHIP_92D BIT(1) ++#define NORMAL_CHIP BIT(3) ++#define RF_TYPE_1T1R (~(BIT(4)|BIT(5)|BIT(6))) ++#define RF_TYPE_1T2R BIT(4) ++#define RF_TYPE_2T2R BIT(5) ++#define CHIP_VENDOR_UMC BIT(7) ++#define B_CUT_VERSION BIT(12) ++#define C_CUT_VERSION BIT(13) ++#define D_CUT_VERSION ((BIT(13)|BIT(14))) ++ ++ ++// MASK ++#define IC_TYPE_MASK (BIT(0)|BIT(1)|BIT(2)) ++#define CHIP_TYPE_MASK BIT(3) ++#define RF_TYPE_MASK (BIT(4)|BIT(5)|BIT(6)) ++#define MANUFACTUER_MASK BIT(7) ++#define ROM_VERSION_MASK (BIT(11)|BIT(10)|BIT(9)|BIT(8)) ++#define CUT_VERSION_MASK (BIT(15)|BIT(14)|BIT(13)|BIT(12)) ++ ++// Get element ++#define GET_CVID_IC_TYPE(version) ((version) & IC_TYPE_MASK) ++#define GET_CVID_CHIP_TYPE(version) ((version) & CHIP_TYPE_MASK) ++#define GET_CVID_RF_TYPE(version) ((version) & RF_TYPE_MASK) ++#define GET_CVID_MANUFACTUER(version) ((version) & MANUFACTUER_MASK) ++#define GET_CVID_ROM_VERSION(version) ((version) & ROM_VERSION_MASK) ++#define GET_CVID_CUT_VERSION(version) ((version) & CUT_VERSION_MASK) ++ ++#define IS_81XXC(version) ((GET_CVID_IC_TYPE(version) == 0)? _TRUE : _FALSE) ++#define IS_8723_SERIES(version) ((GET_CVID_IC_TYPE(version) == CHIP_8723)? _TRUE : _FALSE) ++#define IS_92D(version) ((GET_CVID_IC_TYPE(version) == CHIP_92D)? _TRUE : _FALSE) ++#define IS_1T1R(version) ((GET_CVID_RF_TYPE(version))? _FALSE : _TRUE) ++#define IS_1T2R(version) ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R)? _TRUE : _FALSE) ++#define IS_2T2R(version) ((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R)? _TRUE : _FALSE) ++#define IS_NORMAL_CHIP(version) ((GET_CVID_CHIP_TYPE(version))? _TRUE: _FALSE) ++#define IS_CHIP_VENDOR_UMC(version) ((GET_CVID_MANUFACTUER(version))? _TRUE: _FALSE) ++ ++#define IS_81XXC_TEST_CHIP(version) ((IS_81XXC(version) && (!IS_NORMAL_CHIP(version)))? _TRUE: _FALSE) ++#define IS_92D_TEST_CHIP(version) ((IS_92D(version) && (!IS_NORMAL_CHIP(version)))? _TRUE: _FALSE) ++#define IS_92C_SERIAL(version) ((IS_81XXC(version) && IS_2T2R(version)) ? _TRUE : _FALSE) ++#define IS_VENDOR_UMC_A_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE) ++#define IS_VENDOR_8723_A_CUT(version) ((IS_8723_SERIES(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE) ++// 88/92C UMC B-cut vendor is set to TSMC so we need to check CHIP_VENDOR_UMC bit is not 1. ++#define IS_81xxC_VENDOR_UMC_B_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? _TRUE : _FALSE):_FALSE) ++#define IS_92D_SINGLEPHY(version) ((IS_92D(version)) ? (IS_2T2R(version) ? _TRUE: _FALSE) : _FALSE) ++#define IS_92D_C_CUT(version) ((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == 0x2) ? _TRUE : _FALSE) : _FALSE) ++#define IS_92D_D_CUT(version) ((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == 0x3) ? _TRUE : _FALSE) : _FALSE) ++ ++typedef enum _VERSION_8192C{ ++ VERSION_TEST_CHIP_88C = 0x0000, ++ VERSION_TEST_CHIP_92C = 0x0020, ++ VERSION_TEST_UMC_CHIP_8723 = 0x0081, ++ VERSION_NORMAL_TSMC_CHIP_88C = 0x0008, ++ VERSION_NORMAL_TSMC_CHIP_92C = 0x0028, ++ VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x0018, ++ VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x0088, ++ VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x00a8, ++ VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x0098, ++ VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089, ++ VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089, ++ VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x1088, ++ VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x10a8, ++ VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x1090, ++ VERSION_TEST_CHIP_92D_SINGLEPHY= 0x0022, ++ VERSION_TEST_CHIP_92D_DUALPHY = 0x0002, ++ VERSION_NORMAL_CHIP_92D_SINGLEPHY= 0x002a, ++ VERSION_NORMAL_CHIP_92D_DUALPHY = 0x000a, ++ VERSION_NORMAL_CHIP_92D_C_CUT_SINGLEPHY = 0x202a, ++ VERSION_NORMAL_CHIP_92D_C_CUT_DUALPHY = 0x200a, ++ VERSION_NORMAL_CHIP_92D_D_CUT_SINGLEPHY = 0x302a, ++ VERSION_NORMAL_CHIP_92D_D_CUT_DUALPHY = 0x300a, ++}VERSION_8192C,*PVERSION_8192C; ++ ++ ++ ++//------------------------------------------------------------------------- ++// Channel Plan ++//------------------------------------------------------------------------- ++enum ChannelPlan{ ++ CHPL_FCC = 0, ++ CHPL_IC = 1, ++ CHPL_ETSI = 2, ++ CHPL_SPAIN = 3, ++ CHPL_FRANCE = 4, ++ CHPL_MKK = 5, ++ CHPL_MKK1 = 6, ++ CHPL_ISRAEL = 7, ++ CHPL_TELEC = 8, ++ CHPL_GLOBAL = 9, ++ CHPL_WORLD = 10, ++}; ++ ++typedef struct _TxPowerInfo{ ++ u8 CCKIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40_1SIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40_2SIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ s8 HT20IndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 OFDMIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT20MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 TSSI_A; ++ u8 TSSI_B; ++}TxPowerInfo, *PTxPowerInfo; ++ ++#define EFUSE_REAL_CONTENT_LEN 512 ++#define EFUSE_MAP_LEN 128 ++#define EFUSE_MAX_SECTION 16 ++#define EFUSE_IC_ID_OFFSET 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. ++#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN) ++// ++// To prevent out of boundary programming case, leave 1byte and program full section ++// 9bytes + 1byt + 5bytes and pre 1byte. ++// For worst case: ++// | 1byte|----8bytes----|1byte|--5bytes--| ++// | | Reserved(14bytes) | ++// ++#define EFUSE_OOB_PROTECT_BYTES 15 // PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. ++ ++ ++#define EFUSE_MAP_LEN_8723 256 ++#define EFUSE_MAX_SECTION_8723 32 ++ ++//======================================================== ++// EFUSE for BT definition ++//======================================================== ++#define EFUSE_BT_REAL_CONTENT_LEN 1536 // 512*3 ++#define EFUSE_BT_MAP_LEN 1024 // 1k bytes ++#define EFUSE_BT_MAX_SECTION 128 // 1024/8 ++ ++#define EFUSE_PROTECT_BYTES_BANK 16 ++ ++// ++// For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. ++// ++typedef enum _RT_MULTI_FUNC{ ++ RT_MULTI_FUNC_NONE = 0x00, ++ RT_MULTI_FUNC_WIFI = 0x01, ++ RT_MULTI_FUNC_BT = 0x02, ++ RT_MULTI_FUNC_GPS = 0x04, ++}RT_MULTI_FUNC,*PRT_MULTI_FUNC; ++ ++// ++// For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. ++// ++typedef enum _RT_POLARITY_CTL{ ++ RT_POLARITY_LOW_ACT = 0, ++ RT_POLARITY_HIGH_ACT = 1, ++}RT_POLARITY_CTL,*PRT_POLARITY_CTL; ++ ++// For RTL8723 regulator mode. by tynli. 2011.01.14. ++typedef enum _RT_REGULATOR_MODE{ ++ RT_SWITCHING_REGULATOR = 0, ++ RT_LDO_REGULATOR = 1, ++}RT_REGULATOR_MODE,*PRT_REGULATOR_MODE; ++ ++enum c2h_id_8192c { ++ C2H_DBG = 0, ++ C2H_TSF = 1, ++ C2H_AP_RPT_RSP = 2, ++ C2H_CCX_TX_RPT = 3, ++ C2H_BT_RSSI = 4, ++ C2H_BT_OP_MODE = 5, ++ C2H_EXT_RA_RPT = 6, ++ C2H_HW_INFO_EXCH = 10, ++ C2H_C2H_H2C_TEST = 11, ++ C2H_BT_INFO = 12, ++ C2H_BT_MP_INFO = 15, ++ MAX_C2HEVENT ++}; ++ ++#ifdef CONFIG_PCI_HCI ++struct hal_data_8192ce ++{ ++ VERSION_8192C VersionID; ++ RT_MULTI_FUNC MultiFunc; // For multi-function consideration. ++ RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control. ++ RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO ++ u16 CustomerID; ++ ++ u16 FirmwareVersion; ++ u16 FirmwareVersionRev; ++ u16 FirmwareSubVersion; ++ ++ u32 IntrMask[2]; ++ u32 IntrMaskToSet[2]; ++ ++ u32 DisabledFunctions; ++ ++ //current WIFI_PHY values ++ u32 ReceiveConfig; ++ u32 TransmitConfig; ++ WIRELESS_MODE CurrentWirelessMode; ++ HT_CHANNEL_WIDTH CurrentChannelBW; ++ u8 CurrentChannel; ++ u8 nCur40MhzPrimeSC;// Control channel sub-carrier ++ ++ u16 BasicRateSet; ++ ++ //rf_ctrl ++ _lock rf_lock; ++ u8 rf_chip; ++ u8 rf_type; ++ u8 NumTotalRFPath; ++ ++ INTERFACE_SELECT_8192CPCIe InterfaceSel; ++ ++ // ++ // EEPROM setting. ++ // ++ u16 EEPROMVID; ++ u16 EEPROMDID; ++ u16 EEPROMSVID; ++ u16 EEPROMSMID; ++ u16 EEPROMChannelPlan; ++ u16 EEPROMVersion; ++ ++ u8 EEPROMChnlAreaTxPwrCCK[2][3]; ++ u8 EEPROMChnlAreaTxPwrHT40_1S[2][3]; ++ u8 EEPROMChnlAreaTxPwrHT40_2SDiff[2][3]; ++ u8 EEPROMPwrLimitHT20[3]; ++ u8 EEPROMPwrLimitHT40[3]; ++ ++ u8 bTXPowerDataReadFromEEPORM; ++ u8 EEPROMThermalMeter; ++ u8 EEPROMTSSI[2]; ++ ++ u8 EEPROMCustomerID; ++ u8 EEPROMBoardType; ++ u8 EEPROMRegulatory; ++ ++ u8 bDefaultAntenna; ++ u8 bIQKInitialized; ++ ++ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ s8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff ++ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff ++ // For power group ++ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ ++ u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff ++ ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv bt_coexist; ++#endif ++ ++ // Read/write are allow for following hardware information variables ++ u8 framesync; ++ u32 framesyncC34; ++ u8 framesyncMonitor; ++ u8 DefaultInitialGain[4]; ++ u8 pwrGroupCnt; ++ u32 MCSTxPowerLevelOriginalOffset[7][16]; ++ u32 CCKTxPowerLevelOriginalOffset; ++ ++ u32 AntennaTxPath; // Antenna path Tx ++ u32 AntennaRxPath; // Antenna path Rx ++ u8 BluetoothCoexist; ++ u8 ExternalPA; ++ ++ //u32 LedControlNum; ++ //u32 LedControlMode; ++ u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. ++ //u32 TxPowerTrackControl; ++ u8 b1x1RecvCombine; // for 1T1R receive combining ++ ++ u8 bCurrentTurboEDCA; ++ u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo. ++ ++ //vivi, for tx power tracking, 20080407 ++ //u16 TSSI_13dBm; ++ //u32 Pwr_Track; ++ // The current Tx Power Level ++ u8 CurrentCckTxPwrIdx; ++ u8 CurrentOfdm24GTxPwrIdx; ++ ++ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D ++ ++ BOOLEAN bRFPathRxEnable[4]; // We support 4 RF path now. ++ ++ u32 RfRegChnlVal[2]; ++ ++ u8 bCckHighPower; ++ ++ //RDG enable ++ BOOLEAN bRDGEnable; ++ ++ //for host message to fw ++ u8 LastHMEBoxNum; ++ ++ u8 fw_ractrl; ++ u8 RegTxPause; ++ // Beacon function related global variable. ++ u32 RegBcnCtrlVal; ++ u8 RegFwHwTxQCtrl; ++ u8 RegReg542; ++ u8 CurAntenna; ++ u8 AntDivCfg; ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ //SW Antenna Switch ++ s32 RSSI_sum_A; ++ s32 RSSI_sum_B; ++ s32 RSSI_cnt_A; ++ s32 RSSI_cnt_B; ++ BOOLEAN RSSI_test; ++#endif ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ //Hybrid Antenna Diversity ++ u32 CCK_Ant1_Cnt; ++ u32 CCK_Ant2_Cnt; ++ u32 OFDM_Ant1_Cnt; ++ u32 OFDM_Ant2_Cnt; ++#endif ++ ++ struct dm_priv dmpriv; ++ u8 bDumpRxPkt;//for debug ++#ifdef DBG_CONFIG_ERROR_DETECT ++ struct sreset_priv srestpriv; ++#endif ++ u8 bInterruptMigration; ++ u8 bDisableTxInt; ++ u8 bGpioHwWpsPbc; ++ ++ u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. ++ ++ u16 EfuseUsedBytes; ++ ++#ifdef CONFIG_P2P ++ struct P2P_PS_Offload_t p2p_ps_offload; ++#endif //CONFIG_P2P ++}; ++ ++typedef struct hal_data_8192ce HAL_DATA_TYPE, *PHAL_DATA_TYPE; ++ ++// ++// Function disabled. ++// ++#define DF_TX_BIT BIT0 ++#define DF_RX_BIT BIT1 ++#define DF_IO_BIT BIT2 ++#define DF_IO_D3_BIT BIT3 ++ ++#define RT_DF_TYPE u32 ++#define RT_DISABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions |= ((RT_DF_TYPE)(__FuncBits))) ++#define RT_ENABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions &= (~((RT_DF_TYPE)(__FuncBits)))) ++#define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) ++#define IS_MULTI_FUNC_CHIP(_Adapter) (((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) ++ ++void InterruptRecognized8192CE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent); ++VOID UpdateInterruptMask8192CE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1); ++#endif ++ ++#ifdef CONFIG_USB_HCI ++struct hal_data_8192cu ++{ ++ VERSION_8192C VersionID; ++ RT_MULTI_FUNC MultiFunc; // For multi-function consideration. ++ RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control. ++ RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO ++ u16 CustomerID; ++ ++ u16 FirmwareVersion; ++ u16 FirmwareVersionRev; ++ u16 FirmwareSubVersion; ++ ++ //current WIFI_PHY values ++ u32 ReceiveConfig; ++ WIRELESS_MODE CurrentWirelessMode; ++ HT_CHANNEL_WIDTH CurrentChannelBW; ++ u8 CurrentChannel; ++ u8 nCur40MhzPrimeSC;// Control channel sub-carrier ++ ++ u16 BasicRateSet; ++ ++ //rf_ctrl ++ u8 rf_chip; ++ u8 rf_type; ++ u8 NumTotalRFPath; ++ ++ u8 BoardType; ++ //INTERFACE_SELECT_8192CUSB InterfaceSel; ++ ++ // ++ // EEPROM setting. ++ // ++ u16 EEPROMVID; ++ u16 EEPROMPID; ++ u16 EEPROMSVID; ++ u16 EEPROMSDID; ++ u8 EEPROMCustomerID; ++ u8 EEPROMSubCustomerID; ++ u8 EEPROMVersion; ++ u8 EEPROMRegulatory; ++ ++ u8 bTXPowerDataReadFromEEPORM; ++ u8 EEPROMThermalMeter; ++ ++ u8 bIQKInitialized; ++ ++ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ s8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff ++ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff ++ // For power group ++ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ ++ u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff ++ ++ // Read/write are allow for following hardware information variables ++ u8 framesync; ++ u32 framesyncC34; ++ u8 framesyncMonitor; ++ u8 DefaultInitialGain[4]; ++ u8 pwrGroupCnt; ++ u32 MCSTxPowerLevelOriginalOffset[7][16]; ++ u32 CCKTxPowerLevelOriginalOffset; ++ ++ u32 AntennaTxPath; // Antenna path Tx ++ u32 AntennaRxPath; // Antenna path Rx ++ u8 BluetoothCoexist; ++ u8 ExternalPA; ++ ++ u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. ++ ++ //u32 LedControlNum; ++ //u32 LedControlMode; ++ //u32 TxPowerTrackControl; ++ u8 b1x1RecvCombine; // for 1T1R receive combining ++ ++ u8 bCurrentTurboEDCA; ++ u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo. ++ ++ //vivi, for tx power tracking, 20080407 ++ //u16 TSSI_13dBm; ++ //u32 Pwr_Track; ++ // The current Tx Power Level ++ u8 CurrentCckTxPwrIdx; ++ u8 CurrentOfdm24GTxPwrIdx; ++ ++ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D ++ ++ BOOLEAN bRFPathRxEnable[4]; // We support 4 RF path now. ++ ++ u32 RfRegChnlVal[2]; ++ ++ u8 bCckHighPower; ++ ++ //RDG enable ++ BOOLEAN bRDGEnable; ++ ++ //for host message to fw ++ u8 LastHMEBoxNum; ++ ++ u8 fw_ractrl; ++ u8 RegTxPause; ++ // Beacon function related global variable. ++ u32 RegBcnCtrlVal; ++ u8 RegFwHwTxQCtrl; ++ u8 RegReg542; ++ ++ struct dm_priv dmpriv; ++#ifdef DBG_CONFIG_ERROR_DETECT ++ struct sreset_priv srestpriv; ++#endif ++ ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv bt_coexist; ++#endif ++ u8 CurAntenna; ++ u8 AntDivCfg; ++ ++#ifdef CONFIG_SW_ANTENNA_DIVERSITY ++ //SW Antenna Switch ++ s32 RSSI_sum_A; ++ s32 RSSI_sum_B; ++ s32 RSSI_cnt_A; ++ s32 RSSI_cnt_B; ++ BOOLEAN RSSI_test; ++#endif ++#ifdef CONFIG_HW_ANTENNA_DIVERSITY ++ //Hybrid Antenna Diversity ++ u32 CCK_Ant1_Cnt; ++ u32 CCK_Ant2_Cnt; ++ u32 OFDM_Ant1_Cnt; ++ u32 OFDM_Ant2_Cnt; ++#endif ++ ++ u8 bDumpRxPkt;//for debug ++ u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. ++ ++ // 2010/08/09 MH Add CU power down mode. ++ BOOLEAN pwrdown; ++ ++ // For 92C USB endpoint setting ++ // ++ ++ u32 UsbBulkOutSize; ++ ++ int RtBulkOutPipe[3]; ++ int RtBulkInPipe; ++ int RtIntInPipe; ++ // Add for dual MAC 0--Mac0 1--Mac1 ++ u32 interfaceIndex; ++ ++ u8 OutEpQueueSel; ++ u8 OutEpNumber; ++ ++ u8 Queue2EPNum[8];//for out endpoint number mapping ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ u8 UsbTxAggMode; ++ u8 UsbTxAggDescNum; ++#endif ++#ifdef CONFIG_USB_RX_AGGREGATION ++ u16 HwRxPageSize; // Hardware setting ++ u32 MaxUsbRxAggBlock; ++ ++ USB_RX_AGG_MODE UsbRxAggMode; ++ u8 UsbRxAggBlockCount; // USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed ++ u8 UsbRxAggBlockTimeout; ++ u8 UsbRxAggPageCount; // 8192C DMA page count ++ u8 UsbRxAggPageTimeout; ++#endif ++ ++ // 2010/12/10 MH Add for USB aggreation mode dynamic shceme. ++ BOOLEAN UsbRxHighSpeedMode; ++ ++ // 2010/11/22 MH Add for slim combo debug mode selective. ++ // This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock. ++ BOOLEAN SlimComboDbg; ++ ++ u16 EfuseUsedBytes; ++ ++#ifdef CONFIG_P2P ++ struct P2P_PS_Offload_t p2p_ps_offload; ++#endif //CONFIG_P2P ++}; ++ ++typedef struct hal_data_8192cu HAL_DATA_TYPE, *PHAL_DATA_TYPE; ++#endif ++ ++#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData)) ++#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type) ++ ++#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) ++#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) ++ ++VOID rtl8192c_FirmwareSelfReset(IN PADAPTER Adapter); ++int FirmwareDownload92C(IN PADAPTER Adapter,IN BOOLEAN bUsedWoWLANFw); ++VOID InitializeFirmwareVars92C(PADAPTER Adapter); ++u8 GetEEPROMSize8192C(PADAPTER Adapter); ++void rtl8192c_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); ++VERSION_8192C rtl8192c_ReadChipVersion(IN PADAPTER Adapter); ++void rtl8192c_ReadBluetoothCoexistInfo(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail); ++//void rtl8192c_free_hal_data(_adapter * padapter); ++VOID rtl8192c_EfuseParseIDCode(PADAPTER pAdapter, u8 *hwinfo); ++void rtl8192c_set_hal_ops(struct hal_ops *pHalFunc); ++ ++s32 c2h_id_filter_ccx_8192c(u8 id); ++#endif ++ ++#ifdef CONFIG_MP_INCLUDED ++ ++extern void Hal_SetAntenna(PADAPTER pAdapter); ++extern void Hal_SetBandwidth(PADAPTER pAdapter); ++ ++extern void Hal_SetTxPower(PADAPTER pAdapter); ++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart ); ++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart); ++ ++extern void Hal_SetDataRate(PADAPTER pAdapter); ++extern void Hal_SetChannel(PADAPTER pAdapter); ++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter); ++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther); ++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable); ++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable); ++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value); ++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter); ++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14); ++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven); ++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter); ++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter); ++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_led.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_led.h +new file mode 100644 +index 000000000000..88002db1b834 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_led.h +@@ -0,0 +1,41 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192C_LED_H_ ++#define __RTL8192C_LED_H_ ++ ++#include ++#include ++#include ++ ++ ++//================================================================================ ++// Interface to manipulate LED objects. ++//================================================================================ ++#ifdef CONFIG_USB_HCI ++void rtl8192cu_InitSwLeds(_adapter *padapter); ++void rtl8192cu_DeInitSwLeds(_adapter *padapter); ++#endif ++#ifdef CONFIG_PCI_HCI ++void rtl8192ce_gen_RefreshLedState(PADAPTER Adapter); ++void rtl8192ce_InitSwLeds(_adapter *padapter); ++void rtl8192ce_DeInitSwLeds(_adapter *padapter); ++#endif ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_recv.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_recv.h +new file mode 100644 +index 000000000000..9cfca910dd4e +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_recv.h +@@ -0,0 +1,183 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192C_RECV_H_ ++#define _RTL8192C_RECV_H_ ++ ++#include ++#include ++#include ++ ++ ++#ifdef PLATFORM_OS_XP ++ #define NR_RECVBUFF (16) ++#elif defined(PLATFORM_OS_CE) ++ #define NR_RECVBUFF (4) ++#else ++#ifdef CONFIG_SINGLE_RECV_BUF ++ #define NR_RECVBUFF (1) ++#else ++ #define NR_RECVBUFF (4) ++#endif //CONFIG_SINGLE_RECV_BUF ++ ++ #define NR_PREALLOC_RECV_SKB (8) ++#endif ++ ++ ++#define RECV_BLK_SZ 512 ++#define RECV_BLK_CNT 16 ++#define RECV_BLK_TH RECV_BLK_CNT ++ ++#if defined(CONFIG_USB_HCI) ++ ++#ifdef PLATFORM_OS_CE ++#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k ++#else ++ #ifndef CONFIG_MINIMAL_MEMORY_USAGE ++ //#define MAX_RECVBUF_SZ (32768) // 32k ++ //#define MAX_RECVBUF_SZ (16384) //16K ++ //#define MAX_RECVBUF_SZ (10240) //10K ++ #ifdef CONFIG_PLATFORM_MSTAR ++ #define MAX_RECVBUF_SZ (8192) // 8K ++ #else ++ #define MAX_RECVBUF_SZ (15360) // 15k < 16k ++ #endif ++ //#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k ++ #else ++ #define MAX_RECVBUF_SZ (4000) // about 4K ++ #endif ++#endif ++ ++#elif defined(CONFIG_PCI_HCI) ++//#ifndef CONFIG_MINIMAL_MEMORY_USAGE ++// #define MAX_RECVBUF_SZ (9100) ++//#else ++ #define MAX_RECVBUF_SZ (4000) // about 4K ++//#endif ++ ++#define RX_MPDU_QUEUE 0 ++#define RX_CMD_QUEUE 1 ++#define RX_MAX_QUEUE 2 ++#endif ++ ++ ++#define RECV_BULK_IN_ADDR 0x80 ++#define RECV_INT_IN_ADDR 0x81 ++ ++#define PHY_RSSI_SLID_WIN_MAX 100 ++#define PHY_LINKQUALITY_SLID_WIN_MAX 20 ++ ++ ++struct phy_stat ++{ ++ unsigned int phydw0; ++ ++ unsigned int phydw1; ++ ++ unsigned int phydw2; ++ ++ unsigned int phydw3; ++ ++ unsigned int phydw4; ++ ++ unsigned int phydw5; ++ ++ unsigned int phydw6; ++ ++ unsigned int phydw7; ++}; ++ ++typedef struct _Phy_OFDM_Rx_Status_Report_8192cd ++{ ++ unsigned char trsw_gain_X[4]; ++ unsigned char pwdb_all; ++ unsigned char cfosho_X[4]; ++ unsigned char cfotail_X[4]; ++ unsigned char rxevm_X[2]; ++ unsigned char rxsnr_X[4]; ++ unsigned char pdsnr_X[2]; ++ unsigned char csi_current_X[2]; ++ unsigned char csi_target_X[2]; ++ unsigned char sigevm; ++ unsigned char max_ex_pwr; ++//#ifdef RTL8192SE ++#ifdef CONFIG_LITTLE_ENDIAN ++ unsigned char ex_intf_flg:1; ++ unsigned char sgi_en:1; ++ unsigned char rxsc:2; ++ //unsigned char rsvd:4; ++ unsigned char idle_long:1; ++ unsigned char r_ant_train_en:1; ++ unsigned char ANTSELB:1; ++ unsigned char ANTSEL:1; ++#else // _BIG_ENDIAN_ ++ //unsigned char rsvd:4; ++ unsigned char ANTSEL:1; ++ unsigned char ANTSELB:1; ++ unsigned char r_ant_train_en:1; ++ unsigned char idle_long:1; ++ unsigned char rxsc:2; ++ unsigned char sgi_en:1; ++ unsigned char ex_intf_flg:1; ++#endif ++//#else // RTL8190, RTL8192E ++// unsigned char sgi_en; ++// unsigned char rxsc_sgien_exflg; ++//#endif ++} __attribute__ ((packed))PHY_STS_OFDM_8192CD_T,PHY_RX_DRIVER_INFO_8192CD; ++ ++typedef struct _Phy_CCK_Rx_Status_Report_8192cd ++{ ++ /* For CCK rate descriptor. This is a signed 8:1 variable. LSB bit presend ++ 0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */ ++ u8 adc_pwdb_X[4]; ++ u8 SQ_rpt; ++ u8 cck_agc_rpt; ++} PHY_STS_CCK_8192CD_T; ++ ++ ++// Rx smooth factor ++#define Rx_Smooth_Factor (20) ++ ++ ++#ifdef CONFIG_USB_HCI ++typedef struct _INTERRUPT_MSG_FORMAT_EX{ ++ unsigned int C2H_MSG0; ++ unsigned int C2H_MSG1; ++ unsigned int C2H_MSG2; ++ unsigned int C2H_MSG3; ++ unsigned int HISR; // from HISR Reg0x124, read to clear ++ unsigned int HISRE;// from HISRE Reg0x12c, read to clear ++ unsigned int MSG_EX; ++}INTERRUPT_MSG_FORMAT_EX,*PINTERRUPT_MSG_FORMAT_EX; ++ ++void rtl8192cu_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf); ++int rtl8192cu_init_recv_priv(_adapter * padapter); ++void rtl8192cu_free_recv_priv(_adapter * padapter); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++int rtl8192ce_init_recv_priv(_adapter * padapter); ++void rtl8192ce_free_recv_priv(_adapter * padapter); ++#endif ++ ++void rtl8192c_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info); ++void rtl8192c_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_rf.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_rf.h +new file mode 100644 +index 000000000000..7e225034049f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_rf.h +@@ -0,0 +1,91 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/****************************************************************************** ++ * ++ * ++ * Module: rtl8192c_rf.h ( Header File) ++ * ++ * Note: Collect every HAL RF type exter API or constant. ++ * ++ * Function: ++ * ++ * Export: ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * ++ * 09/25/2008 MHC Create initial version. ++ * ++ * ++******************************************************************************/ ++#ifndef _RTL8192C_RF_H_ ++#define _RTL8192C_RF_H_ ++/* Check to see if the file has been included already. */ ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++// ++// For RF 6052 Series ++// ++#define RF6052_MAX_TX_PWR 0x3F ++#define RF6052_MAX_REG 0x3F ++#define RF6052_MAX_PATH 2 ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++/*------------------------------Define structure----------------------------*/ ++ ++/*------------------------------Define structure----------------------------*/ ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++// ++// RF RL6052 Series API ++// ++void rtl8192c_RF_ChangeTxPath( IN PADAPTER Adapter, ++ IN u16 DataRate); ++void rtl8192c_PHY_RF6052SetBandwidth( ++ IN PADAPTER Adapter, ++ IN HT_CHANNEL_WIDTH Bandwidth); ++VOID rtl8192c_PHY_RF6052SetCckTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerlevel); ++VOID rtl8192c_PHY_RF6052SetOFDMTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerLevel, ++ IN u8 Channel); ++int PHY_RF6052_Config8192C( IN PADAPTER Adapter ); ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++ ++#endif/* End of HalRf.h */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_spec.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_spec.h +new file mode 100644 +index 000000000000..c45a140c1e76 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_spec.h +@@ -0,0 +1,1864 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192C_SPEC_H__ ++#define __RTL8192C_SPEC_H__ ++ ++#include ++ ++#ifndef BIT ++#define BIT(x) (1 << (x)) ++#endif ++ ++#define BIT0 0x00000001 ++#define BIT1 0x00000002 ++#define BIT2 0x00000004 ++#define BIT3 0x00000008 ++#define BIT4 0x00000010 ++#define BIT5 0x00000020 ++#define BIT6 0x00000040 ++#define BIT7 0x00000080 ++#define BIT8 0x00000100 ++#define BIT9 0x00000200 ++#define BIT10 0x00000400 ++#define BIT11 0x00000800 ++#define BIT12 0x00001000 ++#define BIT13 0x00002000 ++#define BIT14 0x00004000 ++#define BIT15 0x00008000 ++#define BIT16 0x00010000 ++#define BIT17 0x00020000 ++#define BIT18 0x00040000 ++#define BIT19 0x00080000 ++#define BIT20 0x00100000 ++#define BIT21 0x00200000 ++#define BIT22 0x00400000 ++#define BIT23 0x00800000 ++#define BIT24 0x01000000 ++#define BIT25 0x02000000 ++#define BIT26 0x04000000 ++#define BIT27 0x08000000 ++#define BIT28 0x10000000 ++#define BIT29 0x20000000 ++#define BIT30 0x40000000 ++#define BIT31 0x80000000 ++ ++ ++//============================================================ ++// 8192C Regsiter offset definition ++//============================================================ ++ ++ ++//============================================================ ++// ++//============================================================ ++ ++//----------------------------------------------------- ++// ++// 0x0000h ~ 0x00FFh System Configuration ++// ++//----------------------------------------------------- ++#define REG_SYS_ISO_CTRL 0x0000 ++#define REG_SYS_FUNC_EN 0x0002 ++#define REG_APS_FSMCO 0x0004 ++#define REG_SYS_CLKR 0x0008 ++#define REG_9346CR 0x000A ++#define REG_EE_VPD 0x000C ++#define REG_AFE_MISC 0x0010 ++#define REG_SPS0_CTRL 0x0011 ++#define REG_SPS_OCP_CFG 0x0018 ++#define REG_RSV_CTRL 0x001C ++#define REG_RF_CTRL 0x001F ++#define REG_LDOA15_CTRL 0x0020 ++#define REG_LDOV12D_CTRL 0x0021 ++#define REG_LDOHCI12_CTRL 0x0022 ++#define REG_LPLDO_CTRL 0x0023 ++#define REG_AFE_XTAL_CTRL 0x0024 ++#define REG_AFE_PLL_CTRL 0x0028 ++#define REG_EFUSE_CTRL 0x0030 ++#define REG_EFUSE_TEST 0x0034 ++#define REG_PWR_DATA 0x0038 ++#define REG_CAL_TIMER 0x003C ++#define REG_ACLK_MON 0x003E ++#define REG_GPIO_MUXCFG 0x0040 ++#define REG_GPIO_IO_SEL 0x0042 ++#define REG_MAC_PINMUX_CFG 0x0043 ++#define REG_GPIO_PIN_CTRL 0x0044 ++#define REG_GPIO_INTM 0x0048 ++#define REG_LEDCFG0 0x004C ++#define REG_LEDCFG1 0x004D ++#define REG_LEDCFG2 0x004E ++#define REG_LEDCFG3 0x004F ++#define REG_LEDCFG REG_LEDCFG2 ++#define REG_FSIMR 0x0050 ++#define REG_FSISR 0x0054 ++#define REG_HSIMR 0x0058 ++#define REG_HSISR 0x005c ++#define REG_GPIO_PIN_CTRL_2 0x0060 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control. ++#define REG_GPIO_IO_SEL_2 0x0062 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Select. ++#define REG_MULTI_FUNC_CTRL 0x0068 // RTL8723 WIFI/BT/GPS Multi-Function control source. ++#define REG_MCUFWDL 0x0080 ++#ifdef CONFIG_WOWLAN ++#define REG_WOWLAN_REASON 0x0081 ++#endif //CONFIG_WOWLAN ++#define REG_HMEBOX_EXT_0 0x0088 ++#define REG_HMEBOX_EXT_1 0x008A ++#define REG_HMEBOX_EXT_2 0x008C ++#define REG_HMEBOX_EXT_3 0x008E ++#define REG_HOST_SUSP_CNT 0x00BC // Host suspend counter on FPGA platform ++#define REG_EFUSE_ACCESS 0x00CF // Efuse access protection for RTL8723 ++#define REG_BIST_SCAN 0x00D0 ++#define REG_BIST_RPT 0x00D4 ++#define REG_BIST_ROM_RPT 0x00D8 ++#define REG_USB_SIE_INTF 0x00E0 ++#define REG_PCIE_MIO_INTF 0x00E4 ++#define REG_PCIE_MIO_INTD 0x00E8 ++#define REG_HPON_FSM 0x00EC ++#define REG_SYS_CFG 0x00F0 ++#define REG_GPIO_OUTSTS 0x00F4 // For RTL8723 only. ++ ++//----------------------------------------------------- ++// ++// 0x0100h ~ 0x01FFh MACTOP General Configuration ++// ++//----------------------------------------------------- ++#define REG_CR 0x0100 ++#define REG_PBP 0x0104 ++#define REG_TRXDMA_CTRL 0x010C ++#define REG_TRXFF_BNDY 0x0114 ++#define REG_TRXFF_STATUS 0x0118 ++#define REG_RXFF_PTR 0x011C ++#define REG_HIMR 0x0120 ++#define REG_HISR 0x0124 ++#define REG_HIMRE 0x0128 ++#define REG_HISRE 0x012C ++#define REG_CPWM 0x012F ++#define REG_FWIMR 0x0130 ++#define REG_FWISR 0x0134 ++#define REG_PKTBUF_DBG_CTRL 0x0140 ++#define REG_PKTBUF_DBG_DATA_L 0x0144 ++#define REG_PKTBUF_DBG_DATA_H 0x0148 ++ ++#define REG_TC0_CTRL 0x0150 ++#define REG_TC1_CTRL 0x0154 ++#define REG_TC2_CTRL 0x0158 ++#define REG_TC3_CTRL 0x015C ++#define REG_TC4_CTRL 0x0160 ++#define REG_TCUNIT_BASE 0x0164 ++#define REG_MBIST_START 0x0174 ++#define REG_MBIST_DONE 0x0178 ++#define REG_MBIST_FAIL 0x017C ++#define REG_C2HEVT_MSG_NORMAL 0x01A0 ++#define REG_C2HEVT_CLEAR 0x01AF ++#define REG_C2HEVT_MSG_TEST 0x01B8 ++#define REG_MCUTST_1 0x01c0 ++#define REG_FMETHR 0x01C8 ++#define REG_HMETFR 0x01CC ++#define REG_HMEBOX_0 0x01D0 ++#define REG_HMEBOX_1 0x01D4 ++#define REG_HMEBOX_2 0x01D8 ++#define REG_HMEBOX_3 0x01DC ++ ++#define REG_LLT_INIT 0x01E0 ++#define REG_BB_ACCEESS_CTRL 0x01E8 ++#define REG_BB_ACCESS_DATA 0x01EC ++ ++ ++//----------------------------------------------------- ++// ++// 0x0200h ~ 0x027Fh TXDMA Configuration ++// ++//----------------------------------------------------- ++#define REG_RQPN 0x0200 ++#define REG_FIFOPAGE 0x0204 ++#define REG_TDECTRL 0x0208 ++#define REG_TXDMA_OFFSET_CHK 0x020C ++#define REG_TXDMA_STATUS 0x0210 ++#define REG_RQPN_NPQ 0x0214 ++ ++//----------------------------------------------------- ++// ++// 0x0280h ~ 0x02FFh RXDMA Configuration ++// ++//----------------------------------------------------- ++#define REG_RXDMA_AGG_PG_TH 0x0280 ++#define REG_RXPKT_NUM 0x0284 ++#define REG_RXDMA_STATUS 0x0288 ++ ++ ++//----------------------------------------------------- ++// ++// 0x0300h ~ 0x03FFh PCIe ++// ++//----------------------------------------------------- ++#define REG_PCIE_CTRL_REG 0x0300 ++#define REG_INT_MIG 0x0304 // Interrupt Migration ++#define REG_BCNQ_DESA 0x0308 // TX Beacon Descriptor Address ++#define REG_HQ_DESA 0x0310 // TX High Queue Descriptor Address ++#define REG_MGQ_DESA 0x0318 // TX Manage Queue Descriptor Address ++#define REG_VOQ_DESA 0x0320 // TX VO Queue Descriptor Address ++#define REG_VIQ_DESA 0x0328 // TX VI Queue Descriptor Address ++#define REG_BEQ_DESA 0x0330 // TX BE Queue Descriptor Address ++#define REG_BKQ_DESA 0x0338 // TX BK Queue Descriptor Address ++#define REG_RX_DESA 0x0340 // RX Queue Descriptor Address ++#define REG_DBI 0x0348 // Backdoor REG for Access Configuration ++#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY ++#define REG_DBG_SEL 0x0360 // Debug Selection Register ++#define REG_PCIE_HRPWM 0x0361 //PCIe RPWM ++#define REG_PCIE_HCPWM 0x0363 //PCIe CPWM ++#define REG_UART_CTRL 0x0364 // UART Control ++#define REG_UART_TX_DESA 0x0370 // UART TX Descriptor Address ++#define REG_UART_RX_DESA 0x0378 // UART Rx Descriptor Address ++ ++ ++// spec version 11 ++//----------------------------------------------------- ++// ++// 0x0400h ~ 0x047Fh Protocol Configuration ++// ++//----------------------------------------------------- ++#define REG_VOQ_INFORMATION 0x0400 ++#define REG_VIQ_INFORMATION 0x0404 ++#define REG_BEQ_INFORMATION 0x0408 ++#define REG_BKQ_INFORMATION 0x040C ++#define REG_MGQ_INFORMATION 0x0410 ++#define REG_HGQ_INFORMATION 0x0414 ++#define REG_BCNQ_INFORMATION 0x0418 ++ ++ ++#define REG_CPU_MGQ_INFORMATION 0x041C ++#define REG_FWHW_TXQ_CTRL 0x0420 ++#define REG_HWSEQ_CTRL 0x0423 ++#define REG_TXPKTBUF_BCNQ_BDNY 0x0424 ++#define REG_TXPKTBUF_MGQ_BDNY 0x0425 ++#define REG_LIFETIME_EN 0x0426 ++#define REG_MULTI_BCNQ_OFFSET 0x0427 ++#define REG_SPEC_SIFS 0x0428 ++#define REG_RL 0x042A ++#define REG_DARFRC 0x0430 ++#define REG_RARFRC 0x0438 ++#define REG_RRSR 0x0440 ++#define REG_ARFR0 0x0444 ++#define REG_ARFR1 0x0448 ++#define REG_ARFR2 0x044C ++#define REG_ARFR3 0x0450 ++#define REG_AGGLEN_LMT 0x0458 ++#define REG_AMPDU_MIN_SPACE 0x045C ++#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D ++#define REG_FAST_EDCA_CTRL 0x0460 ++#define REG_RD_RESP_PKT_TH 0x0463 ++#define REG_INIRTS_RATE_SEL 0x0480 ++#define REG_INIDATA_RATE_SEL 0x0484 ++ ++//#define REG_FW_TSF_SYNC_CNT 0x04A0 ++#define REG_FW_RESET_TSF_CNT_1 0x05FC ++#define REG_FW_RESET_TSF_CNT_0 0x05FD ++#define REG_FW_BCN_DIS_CNT 0x05FE ++ ++#define REG_POWER_STATUS 0x04A4 ++#define REG_POWER_STAGE1 0x04B4 ++#define REG_POWER_STAGE2 0x04B8 ++#define REG_PKT_VO_VI_LIFE_TIME 0x04C0 ++#define REG_PKT_BE_BK_LIFE_TIME 0x04C2 ++#define REG_STBC_SETTING 0x04C4 ++#define REG_PROT_MODE_CTRL 0x04C8 ++#define REG_MAX_AGGR_NUM 0x04CA ++#define REG_RTS_MAX_AGGR_NUM 0x04CB ++#define REG_BAR_MODE_CTRL 0x04CC ++#define REG_RA_TRY_RATE_AGG_LMT 0x04CF ++#define REG_NQOS_SEQ 0x04DC ++#define REG_QOS_SEQ 0x04DE ++#define REG_NEED_CPU_HANDLE 0x04E0 ++#define REG_PKT_LOSE_RPT 0x04E1 ++#define REG_PTCL_ERR_STATUS 0x04E2 ++#define REG_DUMMY 0x04FC ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0500h ~ 0x05FFh EDCA Configuration ++// ++//----------------------------------------------------- ++#define REG_EDCA_VO_PARAM 0x0500 ++#define REG_EDCA_VI_PARAM 0x0504 ++#define REG_EDCA_BE_PARAM 0x0508 ++#define REG_EDCA_BK_PARAM 0x050C ++#define REG_BCNTCFG 0x0510 ++#define REG_PIFS 0x0512 ++#define REG_RDG_PIFS 0x0513 ++#define REG_SIFS_CCK 0x0514 ++#define REG_SIFS_OFDM 0x0516 ++#define REG_SIFS_CTX 0x0514 ++#define REG_SIFS_TRX 0x0516 ++#define REG_TSFTR_SYN_OFFSET 0x0518 ++#define REG_AGGR_BREAK_TIME 0x051A ++#define REG_SLOT 0x051B ++#define REG_TX_PTCL_CTRL 0x0520 ++#define REG_TXPAUSE 0x0522 ++#define REG_DIS_TXREQ_CLR 0x0523 ++#define REG_RD_CTRL 0x0524 ++#define REG_TBTT_PROHIBIT 0x0540 ++#define REG_RD_NAV_NXT 0x0544 ++#define REG_NAV_PROT_LEN 0x0546 ++#define REG_BCN_CTRL 0x0550 ++#define REG_BCN_CTRL_1 0x0551 ++#define REG_MBID_NUM 0x0552 ++#define REG_DUAL_TSF_RST 0x0553 ++#define REG_BCN_INTERVAL 0x0554 // The same as REG_MBSSID_BCN_SPACE ++#define REG_MBSSID_BCN_SPACE 0x0554 ++#define REG_DRVERLYINT 0x0558 ++#define REG_BCNDMATIM 0x0559 ++#define REG_ATIMWND 0x055A ++#define REG_BCN_MAX_ERR 0x055D ++#define REG_RXTSF_OFFSET_CCK 0x055E ++#define REG_RXTSF_OFFSET_OFDM 0x055F ++#define REG_TSFTR 0x0560 ++#define REG_TSFTR1 0x0568 ++#define REG_INIT_TSFTR 0x0564 ++#define REG_ATIMWND_1 0x0570 ++#define REG_PSTIMER 0x0580 ++#define REG_TIMER0 0x0584 ++#define REG_TIMER1 0x0588 ++#define REG_ACMHWCTRL 0x05C0 ++#define REG_ACMRSTCTRL 0x05C1 ++#define REG_ACMAVG 0x05C2 ++#define REG_VO_ADMTIME 0x05C4 ++#define REG_VI_ADMTIME 0x05C6 ++#define REG_BE_ADMTIME 0x05C8 ++#define REG_EDCA_RANDOM_GEN 0x05CC ++#define REG_SCH_TXCMD 0x05D0 ++ ++ ++//----------------------------------------------------- ++// ++// 0x0600h ~ 0x07FFh WMAC Configuration ++// ++//----------------------------------------------------- ++#define REG_APSD_CTRL 0x0600 ++#define REG_BWOPMODE 0x0603 ++#define REG_TCR 0x0604 ++#define REG_RCR 0x0608 ++#define REG_RX_PKT_LIMIT 0x060C ++#define REG_RX_DLK_TIME 0x060D ++#define REG_RX_DRVINFO_SZ 0x060F ++ ++#define REG_MACID 0x0610 ++#define REG_BSSID 0x0618 ++#define REG_MAR 0x0620 ++#define REG_MBIDCAMCFG 0x0628 ++ ++#define REG_USTIME_EDCA 0x0638 ++#define REG_MAC_SPEC_SIFS 0x063A ++ ++// 20100719 Joseph: Hardware register definition change. (HW datasheet v54) ++#define REG_R2T_SIFS 0x063C // [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK ++#define REG_T2T_SIFS 0x063E // [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK ++#define REG_ACKTO 0x0640 ++#define REG_CTS2TO 0x0641 ++#define REG_EIFS 0x0642 ++ ++//WMA, BA, CCX ++#define REG_NAV_CTRL 0x0650 ++#define REG_BACAMCMD 0x0654 ++#define REG_BACAMCONTENT 0x0658 ++#define REG_LBDLY 0x0660 ++#define REG_FWDLY 0x0661 ++#define REG_RXERR_RPT 0x0664 ++#define REG_WMAC_TRXPTCL_CTL 0x0668 ++ ++ ++// Security ++#define REG_CAMCMD 0x0670 ++#define REG_CAMWRITE 0x0674 ++#define REG_CAMREAD 0x0678 ++#define REG_CAMDBG 0x067C ++#define REG_SECCFG 0x0680 ++ ++// Power ++#define REG_WOW_CTRL 0x0690 ++#define REG_PSSTATUS 0x0691 ++#define REG_PS_RX_INFO 0x0692 ++#define REG_LPNAV_CTRL 0x0694 ++#define REG_WKFMCAM_CMD 0x0698 ++#define REG_WKFMCAM_RWD 0x069C ++#define REG_RXFLTMAP0 0x06A0 ++#define REG_RXFLTMAP1 0x06A2 ++#define REG_RXFLTMAP2 0x06A4 ++#define REG_BCN_PSR_RPT 0x06A8 ++#define REG_CALB32K_CTRL 0x06AC ++#define REG_PKT_MON_CTRL 0x06B4 ++#define REG_BT_COEX_TABLE 0x06C0 ++#define REG_WMAC_RESP_TXINFO 0x06D8 ++ ++#define REG_MACID1 0x0700 ++#define REG_BSSID1 0x0708 ++ ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++#define REG_USB_INFO 0xFE17 ++#define REG_USB_SPECIAL_OPTION 0xFE55 ++#define REG_USB_DMA_AGG_TO 0xFE5B ++#define REG_USB_AGG_TO 0xFE5C ++#define REG_USB_AGG_TH 0xFE5D ++ ++// For test chip ++#define REG_TEST_USB_TXQS 0xFE48 ++#define REG_TEST_SIE_VID 0xFE60 // 0xFE60~0xFE61 ++#define REG_TEST_SIE_PID 0xFE62 // 0xFE62~0xFE63 ++#define REG_TEST_SIE_OPTIONAL 0xFE64 ++#define REG_TEST_SIE_CHIRP_K 0xFE65 ++#define REG_TEST_SIE_PHY 0xFE66 // 0xFE66~0xFE6B ++#define REG_TEST_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 ++#define REG_TEST_SIE_STRING 0xFE80 // 0xFE80~0xFEB9 ++ ++ ++// For normal chip ++#define REG_NORMAL_SIE_VID 0xFE60 // 0xFE60~0xFE61 ++#define REG_NORMAL_SIE_PID 0xFE62 // 0xFE62~0xFE63 ++#define REG_NORMAL_SIE_OPTIONAL 0xFE64 ++#define REG_NORMAL_SIE_EP 0xFE65 // 0xFE65~0xFE67 ++#define REG_NORMAL_SIE_PHY 0xFE68 // 0xFE68~0xFE6B ++#define REG_NORMAL_SIE_OPTIONAL2 0xFE6C ++#define REG_NORMAL_SIE_GPS_EP 0xFE6D // 0xFE6D, for RTL8723 only. ++#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 ++#define REG_NORMAL_SIE_STRING 0xFE80 // 0xFE80~0xFEDF ++ ++ ++//----------------------------------------------------- ++// ++// Redifine 8192C register definition for compatibility ++// ++//----------------------------------------------------- ++ ++// TODO: use these definition when using REG_xxx naming rule. ++// NOTE: DO NOT Remove these definition. Use later. ++ ++#define SYS_ISO_CTRL REG_SYS_ISO_CTRL // System Isolation Interface Control. ++#define SYS_FUNC_EN REG_SYS_FUNC_EN // System Function Enable. ++#define SYS_CLK REG_SYS_CLKR ++#define CR9346 REG_9346CR // 93C46/93C56 Command Register. ++#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control. ++#define EFUSE_TEST REG_EFUSE_TEST // E-Fuse Test. ++#define MSR (REG_CR + 2) // Media Status register ++#define ISR REG_HISR ++#define TSFR REG_TSFTR // Timing Sync Function Timer Register. ++ ++#define MACIDR0 REG_MACID // MAC ID Register, Offset 0x0050-0x0053 ++#define MACIDR4 (REG_MACID + 4) // MAC ID Register, Offset 0x0054-0x0055 ++ ++#define PBP REG_PBP ++ ++// Redifine MACID register, to compatible prior ICs. ++#define IDR0 MACIDR0 ++#define IDR4 MACIDR4 ++ ++ ++// ++// 9. Security Control Registers (Offset: ) ++// ++#define RWCAM REG_CAMCMD //IN 8190 Data Sheet is called CAMcmd ++#define WCAMI REG_CAMWRITE // Software write CAM input content ++#define RCAMO REG_CAMREAD // Software read/write CAM config ++#define CAMDBG REG_CAMDBG ++#define SECR REG_SECCFG //Security Configuration Register ++ ++// Unused register ++#define UnusedRegister 0x1BF ++#define DCAM UnusedRegister ++#define PSR UnusedRegister ++#define BBAddr UnusedRegister ++#define PhyDataR UnusedRegister ++ ++#define InvalidBBRFValue 0x12345678 ++ ++// Min Spacing related settings. ++#define MAX_MSS_DENSITY_2T 0x13 ++#define MAX_MSS_DENSITY_1T 0x0A ++ ++//---------------------------------------------------------------------------- ++// 8192C Cmd9346CR bits (Offset 0xA, 16bit) ++//---------------------------------------------------------------------------- ++#define CmdEEPROM_En BIT5 // EEPROM enable when set 1 ++#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 ++#define Cmd9346CR_9356SEL BIT4 ++#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL) ++#define AutoLoadEFUSE CmdEEPROM_En ++ ++//---------------------------------------------------------------------------- ++// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIOSEL_GPIO 0 ++#define GPIOSEL_ENBT BIT5 ++ ++//---------------------------------------------------------------------------- ++// 8192C GPIO PIN Control Register (offset 0x44, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value ++#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value ++#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. ++#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) ++ ++//---------------------------------------------------------------------------- ++// 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) ++//---------------------------------------------------------------------------- ++/* ++Network Type ++00: No link ++01: Link in ad hoc network ++10: Link in infrastructure network ++11: AP mode ++Default: 00b. ++*/ ++#define MSR_NOLINK 0x00 ++#define MSR_ADHOC 0x01 ++#define MSR_INFRA 0x02 ++#define MSR_AP 0x03 ++ ++// ++// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) ++// ++//---------------------------------------------------------------------------- ++// 8192C Response Rate Set Register (offset 0x181, 24bits) ++//---------------------------------------------------------------------------- ++#define RRSR_RSC_OFFSET 21 ++#define RRSR_SHORT_OFFSET 23 ++#define RRSR_RSC_BW_40M 0x600000 ++#define RRSR_RSC_UPSUBCHNL 0x400000 ++#define RRSR_RSC_LOWSUBCHNL 0x200000 ++#define RRSR_SHORT 0x800000 ++#define RRSR_1M BIT0 ++#define RRSR_2M BIT1 ++#define RRSR_5_5M BIT2 ++#define RRSR_11M BIT3 ++#define RRSR_6M BIT4 ++#define RRSR_9M BIT5 ++#define RRSR_12M BIT6 ++#define RRSR_18M BIT7 ++#define RRSR_24M BIT8 ++#define RRSR_36M BIT9 ++#define RRSR_48M BIT10 ++#define RRSR_54M BIT11 ++#define RRSR_MCS0 BIT12 ++#define RRSR_MCS1 BIT13 ++#define RRSR_MCS2 BIT14 ++#define RRSR_MCS3 BIT15 ++#define RRSR_MCS4 BIT16 ++#define RRSR_MCS5 BIT17 ++#define RRSR_MCS6 BIT18 ++#define RRSR_MCS7 BIT19 ++#define BRSR_AckShortPmb BIT23 ++// CCK ACK: use Short Preamble or not ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C Rate Definition ++//---------------------------------------------------------------------------- ++//CCK ++#define RATR_1M 0x00000001 ++#define RATR_2M 0x00000002 ++#define RATR_55M 0x00000004 ++#define RATR_11M 0x00000008 ++//OFDM ++#define RATR_6M 0x00000010 ++#define RATR_9M 0x00000020 ++#define RATR_12M 0x00000040 ++#define RATR_18M 0x00000080 ++#define RATR_24M 0x00000100 ++#define RATR_36M 0x00000200 ++#define RATR_48M 0x00000400 ++#define RATR_54M 0x00000800 ++//MCS 1 Spatial Stream ++#define RATR_MCS0 0x00001000 ++#define RATR_MCS1 0x00002000 ++#define RATR_MCS2 0x00004000 ++#define RATR_MCS3 0x00008000 ++#define RATR_MCS4 0x00010000 ++#define RATR_MCS5 0x00020000 ++#define RATR_MCS6 0x00040000 ++#define RATR_MCS7 0x00080000 ++//MCS 2 Spatial Stream ++#define RATR_MCS8 0x00100000 ++#define RATR_MCS9 0x00200000 ++#define RATR_MCS10 0x00400000 ++#define RATR_MCS11 0x00800000 ++#define RATR_MCS12 0x01000000 ++#define RATR_MCS13 0x02000000 ++#define RATR_MCS14 0x04000000 ++#define RATR_MCS15 0x08000000 ++ ++//---------------------------------------------------------------------------- ++// 8192C BW_OPMODE bits (Offset 0x203, 8bit) ++//---------------------------------------------------------------------------- ++#define BW_OPMODE_20MHZ BIT2 ++#define BW_OPMODE_5G BIT1 ++#define BW_OPMODE_11J BIT0 ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C CAM Config Setting (offset 0x250, 1 byte) ++//---------------------------------------------------------------------------- ++#define CAM_VALID BIT15 ++#define CAM_NOTVALID 0x0000 ++#define CAM_USEDK BIT5 ++ ++#define CAM_CONTENT_COUNT 8 ++ ++#define CAM_NONE 0x0 ++#define CAM_WEP40 0x01 ++#define CAM_TKIP 0x02 ++#define CAM_AES 0x04 ++#define CAM_WEP104 0x05 ++ ++#define TOTAL_CAM_ENTRY 32 ++#define HALF_CAM_ENTRY 16 ++ ++#define CAM_CONFIG_USEDK _TRUE ++#define CAM_CONFIG_NO_USEDK _FALSE ++ ++#define CAM_WRITE BIT16 ++#define CAM_READ 0x00000000 ++#define CAM_POLLINIG BIT31 ++ ++#define SCR_UseDK 0x01 ++#define SCR_TxSecEnable 0x02 ++#define SCR_RxSecEnable 0x04 ++ ++ ++// ++// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) ++// ++//---------------------------------------------------------------------------- ++// 8190 IMR/ISR bits (offset 0xfd, 8bits) ++//---------------------------------------------------------------------------- ++#define IMR8190_DISABLED 0x0 ++// IMR DW0 Bit 0-31 ++#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6 ++#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5 ++#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4 ++#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3 ++#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2 ++#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1 ++#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8 ++#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7 ++#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6 ++#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5 ++#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4 ++#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3 ++#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2 ++#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1 ++#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2 ++#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1 ++#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow ++#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt ++#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0 ++#define IMR_RXFOVW BIT12 // Receive FIFO Overflow ++#define IMR_RDU BIT11 // Receive Descriptor Unavailable ++#define IMR_ATIMEND BIT10 // For 92C,ATIM Window End Interrupt ++#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup ++#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt ++#define IMR_TBDOK BIT7 // Transmit Beacon OK interrup ++#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt ++#define IMR_TBDER BIT5 // For 92C,Transmit Beacon Error Interrupt ++#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt ++#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt ++#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt ++#define IMR_VODOK BIT1 // AC_VO DMA Interrupt ++#define IMR_ROK BIT0 // Receive DMA OK Interrupt ++ ++#define IMR_RX_MASK (IMR_ROK|IMR_RDU|IMR_RXFOVW) ++#define IMR_TX_MASK (IMR_VODOK|IMR_VIDOK|IMR_BEDOK|IMR_BKDOK|IMR_MGNTDOK|IMR_HIGHDOK|IMR_BDOK) ++ ++// 13. Host Interrupt Status Extension Register (Offset: 0x012C-012Eh) ++#define IMR_BcnInt_E BIT12 ++#define IMR_TXERR BIT11 ++#define IMR_RXERR BIT10 ++#define IMR_C2HCMD BIT9 ++#define IMR_CPWM BIT8 ++//RSVD [2-7] ++#define IMR_OCPINT BIT1 ++#define IMR_WLANOFF BIT0 ++ ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C EFUSE ++//---------------------------------------------------------------------------- ++#define HWSET_MAX_SIZE 128 ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C EEPROM/EFUSE share register definition. ++//---------------------------------------------------------------------------- ++ ++// ++// Default Value for EEPROM or EFUSE!!! ++// ++#define EEPROM_Default_TSSI 0x0 ++#define EEPROM_Default_TxPowerDiff 0x0 ++#define EEPROM_Default_CrystalCap 0x5 ++#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192CE(QFPN68) ++#define EEPROM_Default_TxPower 0x1010 ++#define EEPROM_Default_HT2T_TxPwr 0x10 ++ ++#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 ++#define EEPROM_Default_ThermalMeter 0x12 ++ ++#define EEPROM_Default_AntTxPowerDiff 0x0 ++#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 ++#define EEPROM_Default_TxPowerLevel 0x22 ++#define EEPROM_Default_HT40_2SDiff 0x0 ++#define EEPROM_Default_HT20_Diff 2 // HT20<->40 default Tx Power Index Difference ++#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 ++#define EEPROM_Default_HT40_PwrMaxOffset 0 ++#define EEPROM_Default_HT20_PwrMaxOffset 0 ++ ++// For debug ++#define EEPROM_Default_PID 0x1234 ++#define EEPROM_Default_VID 0x5678 ++#define EEPROM_Default_CustomerID 0xAB ++#define EEPROM_Default_SubCustomerID 0xCD ++#define EEPROM_Default_Version 0 ++ ++#define EEPROM_CHANNEL_PLAN_FCC 0x0 ++#define EEPROM_CHANNEL_PLAN_IC 0x1 ++#define EEPROM_CHANNEL_PLAN_ETSI 0x2 ++#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 ++#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 ++#define EEPROM_CHANNEL_PLAN_MKK 0x5 ++#define EEPROM_CHANNEL_PLAN_MKK1 0x6 ++#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 ++#define EEPROM_CHANNEL_PLAN_TELEC 0x8 ++#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 ++#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA ++#define EEPROM_CHANNEL_PLAN_NCC 0xB ++#define EEPROM_USB_OPTIONAL1 0xE ++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 ++ ++ ++#define EEPROM_CID_DEFAULT 0x0 ++#define EEPROM_CID_TOSHIBA 0x4 ++#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. ++#define EEPROM_CID_QMI 0x0D ++#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 ++ ++ ++#define RTL_EEPROM_ID 0x8129 ++ ++ ++#ifdef CONFIG_PCI_HCI ++#define RT_IBSS_INT_MASKS (IMR_BcnInt | IMR_TBDOK | IMR_TBDER) ++#define RT_AC_INT_MASKS (IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK) ++#define RT_BSS_INT_MASKS (RT_IBSS_INT_MASKS) ++ ++// ++// Interface type. ++// ++typedef enum _INTERFACE_SELECT_8192CPCIe{ ++ INTF_SEL0_SOLO_MINICARD = 0, // WiFi solo-mCard ++ INTF_SEL1_BT_COMBO_MINICARD = 1, // WiFi+BT combo-mCard ++ INTF_SEL2_PCIe = 2, // PCIe Card ++} INTERFACE_SELECT_8192CPCIe, *PINTERFACE_SELECT_8192CPCIe; ++ ++#define RTL8190_EEPROM_ID 0x8129 // 0-1 ++#define EEPROM_HPON 0x02 // LDO settings.2-5 ++#define EEPROM_CLK 0x06 // Clock settings.6-7 ++#define EEPROM_TESTR 0x08 // SE Test mode.8 ++ ++#define EEPROM_VID 0x0A // SE Vendor ID.A-B ++#define EEPROM_DID 0x0C // SE Device ID. C-D ++#define EEPROM_SVID 0x0E // SE Vendor ID.E-F ++#define EEPROM_SMID 0x10 // SE PCI Subsystem ID. 10-11 ++ ++#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17 ++ ++//---------------------------------------------------------------- ++// Ziv - Let PCIe and USB use the same define. Modify address mapping later. ++#define EEPROM_CCK_TX_PWR_INX 0x5A ++#define EEPROM_HT40_1S_TX_PWR_INX 0x60 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF 0x66 ++#define EEPROM_HT20_TX_PWR_INX_DIFF 0x69 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF 0x6C ++#define EEPROM_HT40_MAX_PWR_OFFSET 0x6F ++#define EEPROM_HT20_MAX_PWR_OFFSET 0x72 ++ ++#define EEPROM_CHANNEL_PLAN 0x75 ++#define EEPROM_TSSI_A 0x76 ++#define EEPROM_TSSI_B 0x77 ++#define EEPROM_THERMAL_METER 0x78 ++#define EEPROM_RF_OPT1 0x79 ++#define EEPROM_RF_OPT2 0x7A ++#define EEPROM_RF_OPT3 0x7B ++#define EEPROM_RF_OPT4 0x7C ++#define EEPROM_VERSION 0x7E ++#define EEPROM_CUSTOMER_ID 0x7F ++ ++#define EEPROM_NORMAL_BoardType EEPROM_RF_OPT1 //[7:5] ++ ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ ++//should be renamed and moved to another file ++typedef enum _BOARD_TYPE_8192CUSB{ ++ BOARD_USB_DONGLE = 0, // USB dongle ++ BOARD_USB_High_PA = 1, // USB dongle with high power PA ++ BOARD_MINICARD = 2, // Minicard ++ BOARD_USB_SOLO = 3, // USB solo-Slim module ++ BOARD_USB_COMBO = 4, // USB Combo-Slim module ++} BOARD_TYPE_8192CUSB, *PBOARD_TYPE_8192CUSB; ++ ++#define SUPPORT_HW_RADIO_DETECT(pHalData) (pHalData->BoardType == BOARD_MINICARD||\ ++ pHalData->BoardType == BOARD_USB_SOLO||\ ++ pHalData->BoardType == BOARD_USB_COMBO) ++ ++//--------------------------------------------------------------- ++// EEPROM address for Test chip ++//--------------------------------------------------------------- ++#define EEPROM_TEST_USB_OPT 0x0E ++#define EEPROM_TEST_CHIRP_K 0x0F ++#define EEPROM_TEST_EP_SETTING 0x0E ++#define EEPROM_TEST_USB_PHY 0x10 ++ ++ ++//--------------------------------------------------------------- ++// EEPROM address for Normal chip ++//--------------------------------------------------------------- ++#define EEPROM_NORMAL_USB_OPT 0x0E ++#define EEPROM_NORMAL_CHIRP_K 0x0E // Changed ++#define EEPROM_NORMAL_EP_SETTING 0x0F // Changed ++#define EEPROM_NORMAL_USB_PHY 0x12 // Changed ++ ++ ++// Test chip and normal chip common define ++//--------------------------------------------------------------- ++// EEPROM address for both ++//--------------------------------------------------------------- ++#define EEPROM_ID0 0x00 ++#define EEPROM_ID1 0x01 ++#define EEPROM_RTK_RSV1 0x02 ++#define EEPROM_RTK_RSV2 0x03 ++#define EEPROM_RTK_RSV3 0x04 ++#define EEPROM_RTK_RSV4 0x05 ++#define EEPROM_RTK_RSV5 0x06 ++#define EEPROM_DBG_SEL 0x07 ++#define EEPROM_RTK_RSV6 0x08 ++#define EEPROM_VID 0x0A ++#define EEPROM_PID 0x0C ++ ++#define EEPROM_MAC_ADDR 0x16 ++#define EEPROM_STRING 0x1C ++#define EEPROM_SUBCUSTOMER_ID 0x59 ++#define EEPROM_CCK_TX_PWR_INX 0x5A ++#define EEPROM_HT40_1S_TX_PWR_INX 0x60 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF 0x66 ++#define EEPROM_HT20_TX_PWR_INX_DIFF 0x69 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF 0x6C ++#define EEPROM_HT40_MAX_PWR_OFFSET 0x6F ++#define EEPROM_HT20_MAX_PWR_OFFSET 0x72 ++ ++#define EEPROM_CHANNEL_PLAN 0x75 ++#define EEPROM_TSSI_A 0x76 ++#define EEPROM_TSSI_B 0x77 ++#define EEPROM_THERMAL_METER 0x78 ++#define EEPROM_RF_OPT1 0x79 ++#define EEPROM_RF_OPT2 0x7A ++#define EEPROM_RF_OPT3 0x7B ++#define EEPROM_RF_OPT4 0x7C ++#define EEPROM_VERSION 0x7E ++#define EEPROM_CUSTOMER_ID 0x7F ++ ++#define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU ++#define EEPROM_TxPwIndex 0x5C //0x5C-0x76, Tx Power index. ++#define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM. ++ ++#define EEPROM_TxPowerCCK 0x5A // CCK Tx Power ++ ++// 2009/02/09 Cosa Add for SD3 requirement ++#define EEPROM_TX_PWR_HT20_DIFF 0x6e// HT20 Tx Power Index Difference ++#define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference ++#define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference ++ ++#define EEPROM_TxPWRGroup 0x73// Power diff for channel group ++#define EEPROM_Regulatory 0x79// Check if power safety is need ++ ++#define EEPROM_BLUETOOTH_COEXIST 0x7E // 92cu, 0x7E[4] ++#define EEPROM_NORMAL_BoardType EEPROM_RF_OPT1 //[7:5] ++#define BOARD_TYPE_NORMAL_MASK 0xE0 ++#define BOARD_TYPE_TEST_MASK 0x0F ++#define EEPROM_EASY_REPLACEMENT 0x50//BIT0 1 for build-in module, 0 for external dongle ++//------------------------------------------------------------- ++// EEPROM content definitions ++//------------------------------------------------------------- ++#define OS_LINK_SPEED BIT(5) ++ ++#define BOARD_TYPE_MASK 0xF ++ ++#define BT_COEXISTENCE BIT(4) ++#define BT_CO_SHIFT 4 ++ ++#define EP_NUMBER_MASK 0x30 //bit 4:5 0Eh ++#define EP_NUMBER_SHIFT 4 ++ ++ ++#define USB_PHY_PARA_SIZE 5 ++ ++ ++//------------------------------------------------------------- ++// EEPROM default value definitions ++//------------------------------------------------------------- ++// Use 0xABCD instead of 0x8192 for debug ++#define EEPROM_DEF_ID_0 0xCD // Byte 0x00 ++#define EEPROM_DEF_ID_1 0xAB // Byte 0x01 ++ ++#define EEPROM_DEF_RTK_RSV_A3 0x74 // Byte 0x03 ++#define EEPROM_DEF_RTK_RSV_A4 0x6D // Byte 0x04 ++#define EEPROM_DEF_RTK_RSV_A8 0xFF // Byte 0x08 ++ ++#define EEPROM_DEF_VID_0 0x0A // Byte 0x0A ++#define EEPROM_DEF_VID_1 0x0B ++ ++#define EEPROM_DEF_PID_0 0x92 // Byte 0x0C ++#define EEPROM_DEF_PID_1 0x81 ++ ++ ++#define EEPROM_TEST_DEF_USB_OPT 0x80 // Byte 0x0E ++#define EEPROM_NORMAL_DEF_USB_OPT 0x00 // Byte 0x0E ++ ++#define EEPROM_DEF_CHIRPK 0x15 // Byte 0x0F ++ ++#define EEPROM_DEF_USB_PHY_0 0x85 // Byte 0x10 ++#define EEPROM_DEF_USB_PHY_1 0x62 // Byte 0x11 ++#define EEPROM_DEF_USB_PHY_2 0x9E // Byte 0x12 ++#define EEPROM_DEF_USB_PHY_3 0x06 // Byte 0x13 ++ ++#define EEPROM_DEF_TSSI_A 0x09 // Byte 0x78 ++#define EEPROM_DEF_TSSI_B 0x09 // Byte 0x79 ++ ++ ++#define EEPROM_DEF_THERMAL_METER 0x12 // Byte 0x7A ++ ++#define RF_OPTION1 0x79// Check if power safety spec is need ++#define RF_OPTION2 0x7A ++#define RF_OPTION3 0x7B ++#define RF_OPTION4 0x7C ++ ++ ++#define EEPROM_USB_SN BIT(0) ++#define EEPROM_USB_REMOTE_WAKEUP BIT(1) ++#define EEPROM_USB_DEVICE_PWR BIT(2) ++#define EEPROM_EP_NUMBER (BIT(3)|BIT(4)) ++ ++#if 0 ++#define EEPROM_CHANNEL_PLAN_FCC 0x0 ++#define EEPROM_CHANNEL_PLAN_IC 0x1 ++#define EEPROM_CHANNEL_PLAN_ETSI 0x2 ++#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 ++#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 ++#define EEPROM_CHANNEL_PLAN_MKK 0x5 ++#define EEPROM_CHANNEL_PLAN_MKK1 0x6 ++#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 ++#define EEPROM_CHANNEL_PLAN_TELEC 0x8 ++#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 ++#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA ++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 ++ ++#define EEPROM_CID_DEFAULT 0x0 ++ ++#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 ++ ++ ++#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. ++#endif ++ ++#endif ++ ++ ++/*=================================================================== ++===================================================================== ++Here the register defines are for 92C. When the define is as same with 92C, ++we will use the 92C's define for the consistency ++So the following defines for 92C is not entire!!!!!! ++===================================================================== ++=====================================================================*/ ++/* ++Based on Datasheet V33---090401 ++Register Summary ++Current IOREG MAP ++0x0000h ~ 0x00FFh System Configuration (256 Bytes) ++0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) ++0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) ++0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) ++0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) ++0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) ++0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) ++0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) ++0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) ++*/ ++ ++//---------------------------------------------------------------------------- ++// 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) ++//---------------------------------------------------------------------------- ++#define RCR_APPFCS BIT31 //WMAC append FCS after pauload ++#define RCR_APP_MIC BIT30 // ++#define RCR_APP_PHYSTS BIT28// ++#define RCR_APP_ICV BIT29 // ++#define RCR_APP_PHYST_RXFF BIT28 // ++#define RCR_APP_BA_SSN BIT27 //Accept BA SSN ++#define RCR_ENMBID BIT24 //Enable Multiple BssId. ++#define RCR_LSIGEN BIT23 ++#define RCR_MFBEN BIT22 ++#define RCR_HTC_LOC_CTRL BIT14 //MFC<--HTC=1 MFC-->HTC=0 ++#define RCR_AMF BIT13 //Accept management type frame ++#define RCR_ACF BIT12 //Accept control type frame ++#define RCR_ADF BIT11 //Accept data type frame ++#define RCR_AICV BIT9 //Accept ICV error packet ++#define RCR_ACRC32 BIT8 //Accept CRC32 error packet ++#define RCR_CBSSID_BCN BIT7 //Accept BSSID match packet (Rx beacon, probe rsp) ++#define RCR_CBSSID_DATA BIT6 //Accept BSSID match packet (Data) ++#define RCR_CBSSID RCR_CBSSID_DATA //Accept BSSID match packet ++#define RCR_APWRMGT BIT5 //Accept power management packet ++#define RCR_ADD3 BIT4 //Accept address 3 match packet ++#define RCR_AB BIT3 //Accept broadcast packet ++#define RCR_AM BIT2 //Accept multicast packet ++#define RCR_APM BIT1 //Accept physical match packet ++#define RCR_AAP BIT0 //Accept all unicast packet ++#define RCR_MXDMA_OFFSET 8 ++#define RCR_FIFO_OFFSET 13 ++ ++ ++ ++//============================================================================ ++// 8192c USB specific Regsiter Offset and Content definition, ++// 2009.08.18, added by vivi. for merge 92c and 92C into one driver ++//============================================================================ ++//#define APS_FSMCO 0x0004 same with 92Ce ++#define RSV_CTRL 0x001C ++#define RD_CTRL 0x0524 ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++#define REG_USB_INFO 0xFE17 ++#define REG_USB_SPECIAL_OPTION 0xFE55 ++#define REG_USB_DMA_AGG_TO 0xFE5B ++#define REG_USB_AGG_TO 0xFE5C ++#define REG_USB_AGG_TH 0xFE5D ++ ++#define REG_USB_VID 0xFE60 ++#define REG_USB_PID 0xFE62 ++#define REG_USB_OPTIONAL 0xFE64 ++#define REG_USB_CHIRP_K 0xFE65 ++#define REG_USB_PHY 0xFE66 ++#define REG_USB_MAC_ADDR 0xFE70 ++ ++#define REG_USB_HRPWM 0xFE58 ++#define REG_USB_HCPWM 0xFE57 ++ ++#define InvalidBBRFValue 0x12345678 ++ ++//============================================================================ ++// 8192C Regsiter Bit and Content definition ++//============================================================================ ++//----------------------------------------------------- ++// ++// 0x0000h ~ 0x00FFh System Configuration ++// ++//----------------------------------------------------- ++ ++//2 SPS0_CTRL ++#define SW18_FPWM BIT(3) ++ ++ ++//2 SYS_ISO_CTRL ++#define ISO_MD2PP BIT(0) ++#define ISO_UA2USB BIT(1) ++#define ISO_UD2CORE BIT(2) ++#define ISO_PA2PCIE BIT(3) ++#define ISO_PD2CORE BIT(4) ++#define ISO_IP2MAC BIT(5) ++#define ISO_DIOP BIT(6) ++#define ISO_DIOE BIT(7) ++#define ISO_EB2CORE BIT(8) ++#define ISO_DIOR BIT(9) ++ ++#define PWC_EV25V BIT(14) ++#define PWC_EV12V BIT(15) ++ ++ ++//2 SYS_FUNC_EN ++#define FEN_BBRSTB BIT(0) ++#define FEN_BB_GLB_RSTn BIT(1) ++#define FEN_USBA BIT(2) ++#define FEN_UPLL BIT(3) ++#define FEN_USBD BIT(4) ++#define FEN_DIO_PCIE BIT(5) ++#define FEN_PCIEA BIT(6) ++#define FEN_PPLL BIT(7) ++#define FEN_PCIED BIT(8) ++#define FEN_DIOE BIT(9) ++#define FEN_CPUEN BIT(10) ++#define FEN_DCORE BIT(11) ++#define FEN_ELDR BIT(12) ++#define FEN_DIO_RF BIT(13) ++#define FEN_HWPDN BIT(14) ++#define FEN_MREGEN BIT(15) ++ ++//2 APS_FSMCO ++#define PFM_LDALL BIT(0) ++#define PFM_ALDN BIT(1) ++#define PFM_LDKP BIT(2) ++#define PFM_WOWL BIT(3) ++#define EnPDN BIT(4) ++#define PDN_PL BIT(5) ++#define APFM_ONMAC BIT(8) ++#define APFM_OFF BIT(9) ++#define APFM_RSM BIT(10) ++#define AFSM_HSUS BIT(11) ++#define AFSM_PCIE BIT(12) ++#define APDM_MAC BIT(13) ++#define APDM_HOST BIT(14) ++#define APDM_HPDN BIT(15) ++#define RDY_MACON BIT(16) ++#define SUS_HOST BIT(17) ++#define ROP_ALD BIT(20) ++#define ROP_PWR BIT(21) ++#define ROP_SPS BIT(22) ++#define SOP_MRST BIT(25) ++#define SOP_FUSE BIT(26) ++#define SOP_ABG BIT(27) ++#define SOP_AMB BIT(28) ++#define SOP_RCK BIT(29) ++#define SOP_A8M BIT(30) ++#define XOP_BTCK BIT(31) ++ ++//2 SYS_CLKR ++#define ANAD16V_EN BIT(0) ++#define ANA8M BIT(1) ++#define MACSLP BIT(4) ++#define LOADER_CLK_EN BIT(5) ++#define _80M_SSC_DIS BIT(7) ++#define _80M_SSC_EN_HO BIT(8) ++#define PHY_SSC_RSTB BIT(9) ++#define SEC_CLK_EN BIT(10) ++#define MAC_CLK_EN BIT(11) ++#define SYS_CLK_EN BIT(12) ++#define RING_CLK_EN BIT(13) ++ ++ ++//2 9346CR ++ ++ ++#define EEDO BIT(0) ++#define EEDI BIT(1) ++#define EESK BIT(2) ++#define EECS BIT(3) ++//#define EERPROMSEL BIT(4) ++//#define EEPROM_EN BIT(5) ++#define BOOT_FROM_EEPROM BIT(4) ++#define EEPROM_EN BIT(5) ++#define EEM0 BIT(6) ++#define EEM1 BIT(7) ++ ++ ++//2 AFE_MISC ++#define AFE_BGEN BIT(0) ++#define AFE_MBEN BIT(1) ++#define MAC_ID_EN BIT(7) ++ ++ ++//2 SPS0_CTRL ++ ++ ++//2 SPS_OCP_CFG ++ ++ ++//2 RSV_CTRL ++#define WLOCK_ALL BIT(0) ++#define WLOCK_00 BIT(1) ++#define WLOCK_04 BIT(2) ++#define WLOCK_08 BIT(3) ++#define WLOCK_40 BIT(4) ++#define R_DIS_PRST_0 BIT(5) ++#define R_DIS_PRST_1 BIT(6) ++#define LOCK_ALL_EN BIT(7) ++ ++//2 RF_CTRL ++#define RF_EN BIT(0) ++#define RF_RSTB BIT(1) ++#define RF_SDMRSTB BIT(2) ++ ++ ++ ++//2 LDOA15_CTRL ++#define LDA15_EN BIT(0) ++#define LDA15_STBY BIT(1) ++#define LDA15_OBUF BIT(2) ++#define LDA15_REG_VOS BIT(3) ++#define _LDA15_VOADJ(x) (((x) & 0x7) << 4) ++ ++ ++ ++//2 LDOV12D_CTRL ++#define LDV12_EN BIT(0) ++#define LDV12_SDBY BIT(1) ++#define LPLDO_HSM BIT(2) ++#define LPLDO_LSM_DIS BIT(3) ++#define _LDV12_VADJ(x) (((x) & 0xF) << 4) ++ ++ ++//2 AFE_XTAL_CTRL ++#define XTAL_EN BIT(0) ++#define XTAL_BSEL BIT(1) ++#define _XTAL_BOSC(x) (((x) & 0x3) << 2) ++#define _XTAL_CADJ(x) (((x) & 0xF) << 4) ++#define XTAL_GATE_USB BIT(8) ++#define _XTAL_USB_DRV(x) (((x) & 0x3) << 9) ++#define XTAL_GATE_AFE BIT(11) ++#define _XTAL_AFE_DRV(x) (((x) & 0x3) << 12) ++#define XTAL_RF_GATE BIT(14) ++#define _XTAL_RF_DRV(x) (((x) & 0x3) << 15) ++#define XTAL_GATE_DIG BIT(17) ++#define _XTAL_DIG_DRV(x) (((x) & 0x3) << 18) ++#define XTAL_BT_GATE BIT(20) ++#define _XTAL_BT_DRV(x) (((x) & 0x3) << 21) ++#define _XTAL_GPIO(x) (((x) & 0x7) << 23) ++ ++ ++#define CKDLY_AFE BIT(26) ++#define CKDLY_USB BIT(27) ++#define CKDLY_DIG BIT(28) ++#define CKDLY_BT BIT(29) ++ ++ ++//2 AFE_PLL_CTRL ++#define APLL_EN BIT(0) ++#define APLL_320_EN BIT(1) ++#define APLL_FREF_SEL BIT(2) ++#define APLL_EDGE_SEL BIT(3) ++#define APLL_WDOGB BIT(4) ++#define APLL_LPFEN BIT(5) ++ ++#define APLL_REF_CLK_13MHZ 0x1 ++#define APLL_REF_CLK_19_2MHZ 0x2 ++#define APLL_REF_CLK_20MHZ 0x3 ++#define APLL_REF_CLK_25MHZ 0x4 ++#define APLL_REF_CLK_26MHZ 0x5 ++#define APLL_REF_CLK_38_4MHZ 0x6 ++#define APLL_REF_CLK_40MHZ 0x7 ++ ++#define APLL_320EN BIT(14) ++#define APLL_80EN BIT(15) ++#define APLL_1MEN BIT(24) ++ ++ ++//2 EFUSE_CTRL ++#define ALD_EN BIT(18) ++#define EF_PD BIT(19) ++#define EF_FLAG BIT(31) ++ ++//2 EFUSE_TEST (For RTL8723 partially) ++#define EF_TRPT BIT(7) ++#define EF_CELL_SEL (BIT(8)|BIT(9)) // 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 ++#define LDOE25_EN BIT(31) ++#define EFUSE_SEL(x) (((x) & 0x3) << 8) ++#define EFUSE_SEL_MASK 0x300 ++#define EFUSE_WIFI_SEL_0 0x0 ++#define EFUSE_BT_SEL_0 0x1 ++#define EFUSE_BT_SEL_1 0x2 ++#define EFUSE_BT_SEL_2 0x3 ++ ++#define EFUSE_ACCESS_ON 0x69 // For RTL8723 only. ++#define EFUSE_ACCESS_OFF 0x00 // For RTL8723 only. ++ ++//2 PWR_DATA ++ ++//2 CAL_TIMER ++ ++//2 ACLK_MON ++#define RSM_EN BIT(0) ++#define Timer_EN BIT(4) ++ ++ ++//2 GPIO_MUXCFG ++#define TRSW0EN BIT(2) ++#define TRSW1EN BIT(3) ++#define EROM_EN BIT(4) ++#define EnBT BIT(5) ++#define EnUart BIT(8) ++#define Uart_910 BIT(9) ++#define EnPMAC BIT(10) ++#define SIC_SWRST BIT(11) ++#define EnSIC BIT(12) ++#define SIC_23 BIT(13) ++#define EnHDP BIT(14) ++#define SIC_LBK BIT(15) ++ ++//2 GPIO_PIN_CTRL ++ ++// GPIO BIT ++#define HAL_8192C_HW_GPIO_WPS_BIT BIT(2) ++ ++//2 GPIO_INTM ++ ++//2 LEDCFG ++#define LED0PL BIT(4) ++#define LED0DIS BIT(7) ++#define LED1DIS BIT(15) ++#define LED1PL BIT(12) ++ ++#define SECCAM_CLR BIT(30) ++ ++ ++//2 FSIMR ++ ++//2 FSISR ++ ++ ++//2 8051FWDL ++//2 MCUFWDL ++#define MCUFWDL_EN BIT(0) ++#define MCUFWDL_RDY BIT(1) ++#define FWDL_ChkSum_rpt BIT(2) ++#define MACINI_RDY BIT(3) ++#define BBINI_RDY BIT(4) ++#define RFINI_RDY BIT(5) ++#define WINTINI_RDY BIT(6) ++#define CPRST BIT(23) ++ ++//2REG_HPON_FSM ++#define BOND92CE_1T2R_CFG BIT(22) ++ ++ ++//2 REG_SYS_CFG ++#define XCLK_VLD BIT(0) ++#define ACLK_VLD BIT(1) ++#define UCLK_VLD BIT(2) ++#define PCLK_VLD BIT(3) ++#define PCIRSTB BIT(4) ++#define V15_VLD BIT(5) ++#define TRP_B15V_EN BIT(7) ++#define SIC_IDLE BIT(8) ++#define BD_MAC2 BIT(9) ++#define BD_MAC1 BIT(10) ++#define IC_MACPHY_MODE BIT(11) ++#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15)) ++#define BT_FUNC BIT(16) ++#define VENDOR_ID BIT(19) ++#define PAD_HWPD_IDN BIT(22) ++#define TRP_VAUX_EN BIT(23) ++#define TRP_BT_EN BIT(24) ++#define BD_PKG_SEL BIT(25) ++#define BD_HCI_SEL BIT(26) ++#define TYPE_ID BIT(27) ++ ++#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15 ++#define CHIP_VER_RTL_SHIFT 12 ++ ++//2REG_GPIO_OUTSTS (For RTL8723 only) ++#define EFS_HCI_SEL (BIT(0)|BIT(1)) ++#define PAD_HCI_SEL (BIT(2)|BIT(3)) ++#define HCI_SEL (BIT(4)|BIT(5)) ++#define PKG_SEL_HCI BIT(6) ++#define FEN_GPS BIT(7) ++#define FEN_BT BIT(8) ++#define FEN_WL BIT(9) ++#define FEN_PCI BIT(10) ++#define FEN_USB BIT(11) ++#define BTRF_HWPDN_N BIT(12) ++#define WLRF_HWPDN_N BIT(13) ++#define PDN_BT_N BIT(14) ++#define PDN_GPS_N BIT(15) ++#define BT_CTL_HWPDN BIT(16) ++#define GPS_CTL_HWPDN BIT(17) ++#define PPHY_SUSB BIT(20) ++#define UPHY_SUSB BIT(21) ++#define PCI_SUSEN BIT(22) ++#define USB_SUSEN BIT(23) ++#define RF_RL_ID (BIT(31)|BIT(30)|BIT(29)|BIT(28)) ++ ++//----------------------------------------------------- ++// ++// 0x0100h ~ 0x01FFh MACTOP General Configuration ++// ++//----------------------------------------------------- ++ ++ ++//2 Function Enable Registers ++//2 CR ++ ++#define REG_LBMODE (REG_CR + 3) ++ ++ ++#define HCI_TXDMA_EN BIT(0) ++#define HCI_RXDMA_EN BIT(1) ++#define TXDMA_EN BIT(2) ++#define RXDMA_EN BIT(3) ++#define PROTOCOL_EN BIT(4) ++#define SCHEDULE_EN BIT(5) ++#define MACTXEN BIT(6) ++#define MACRXEN BIT(7) ++#define ENSWBCN BIT(8) ++#define ENSEC BIT(9) ++ ++// Network type ++#define _NETTYPE(x) (((x) & 0x3) << 16) ++#define MASK_NETTYPE 0x30000 ++#define NT_NO_LINK 0x0 ++#define NT_LINK_AD_HOC 0x1 ++#define NT_LINK_AP 0x2 ++#define NT_AS_AP 0x3 ++ ++#define _LBMODE(x) (((x) & 0xF) << 24) ++#define MASK_LBMODE 0xF000000 ++#define LOOPBACK_NORMAL 0x0 ++#define LOOPBACK_IMMEDIATELY 0xB ++#define LOOPBACK_MAC_DELAY 0x3 ++#define LOOPBACK_PHY 0x1 ++#define LOOPBACK_DMA 0x7 ++ ++ ++//2 PBP - Page Size Register ++#define GET_RX_PAGE_SIZE(value) ((value) & 0xF) ++#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4) ++#define _PSRX_MASK 0xF ++#define _PSTX_MASK 0xF0 ++#define _PSRX(x) (x) ++#define _PSTX(x) ((x) << 4) ++ ++#define PBP_64 0x0 ++#define PBP_128 0x1 ++#define PBP_256 0x2 ++#define PBP_512 0x3 ++#define PBP_1024 0x4 ++ ++ ++//2 TX/RXDMA ++#define RXDMA_ARBBW_EN BIT(0) ++#define RXSHFT_EN BIT(1) ++#define RXDMA_AGG_EN BIT(2) ++#define QS_VO_QUEUE BIT(8) ++#define QS_VI_QUEUE BIT(9) ++#define QS_BE_QUEUE BIT(10) ++#define QS_BK_QUEUE BIT(11) ++#define QS_MANAGER_QUEUE BIT(12) ++#define QS_HIGH_QUEUE BIT(13) ++ ++#define HQSEL_VOQ BIT(0) ++#define HQSEL_VIQ BIT(1) ++#define HQSEL_BEQ BIT(2) ++#define HQSEL_BKQ BIT(3) ++#define HQSEL_MGTQ BIT(4) ++#define HQSEL_HIQ BIT(5) ++ ++// For normal driver, 0x10C ++#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14) ++#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12) ++#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10) ++#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 ) ++#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 ) ++#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 ) ++ ++#define QUEUE_LOW 1 ++#define QUEUE_NORMAL 2 ++#define QUEUE_HIGH 3 ++ ++ ++ ++//2 TRXFF_BNDY ++ ++ ++//2 LLT_INIT ++#define _LLT_NO_ACTIVE 0x0 ++#define _LLT_WRITE_ACCESS 0x1 ++#define _LLT_READ_ACCESS 0x2 ++ ++#define _LLT_INIT_DATA(x) ((x) & 0xFF) ++#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8) ++#define _LLT_OP(x) (((x) & 0x3) << 30) ++#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3) ++ ++ ++//2 BB_ACCESS_CTRL ++#define BB_WRITE_READ_MASK (BIT(31) | BIT(30)) ++#define BB_WRITE_EN BIT(30) ++#define BB_READ_EN BIT(31) ++//#define BB_ADDR_MASK 0xFFF ++//#define _BB_ADDR(x) ((x) & BB_ADDR_MASK) ++ ++//----------------------------------------------------- ++// ++// 0x0200h ~ 0x027Fh TXDMA Configuration ++// ++//----------------------------------------------------- ++//2 RQPN ++#define _HPQ(x) ((x) & 0xFF) ++#define _LPQ(x) (((x) & 0xFF) << 8) ++#define _PUBQ(x) (((x) & 0xFF) << 16) ++#define _NPQ(x) ((x) & 0xFF) // NOTE: in RQPN_NPQ register ++ ++ ++#define HPQ_PUBLIC_DIS BIT(24) ++#define LPQ_PUBLIC_DIS BIT(25) ++#define LD_RQPN BIT(31) ++ ++ ++//2 TDECTRL ++#define BCN_VALID BIT(16) ++#define BCN_HEAD(x) (((x) & 0xFF) << 8) ++#define BCN_HEAD_MASK 0xFF00 ++ ++//2 TDECTL ++#define BLK_DESC_NUM_SHIFT 4 ++#define BLK_DESC_NUM_MASK 0xF ++ ++ ++//2 TXDMA_OFFSET_CHK ++#define DROP_DATA_EN BIT(9) ++ ++//----------------------------------------------------- ++// ++// 0x0400h ~ 0x047Fh Protocol Configuration ++// ++//----------------------------------------------------- ++//2 FWHW_TXQ_CTRL ++#define EN_AMPDU_RTY_NEW BIT(7) ++ ++//2 INIRTSMCS_SEL ++#define _INIRTSMCS_SEL(x) ((x) & 0x3F) ++ ++ ++//2 SPEC SIFS ++#define _SPEC_SIFS_CCK(x) ((x) & 0xFF) ++#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8) ++ ++ ++//2 RRSR ++ ++#define RATE_REG_BITMAP_ALL 0xFFFFF ++ ++#define _RRSC_BITMAP(x) ((x) & 0xFFFFF) ++ ++#define _RRSR_RSC(x) (((x) & 0x3) << 21) ++#define RRSR_RSC_RESERVED 0x0 ++#define RRSR_RSC_UPPER_SUBCHANNEL 0x1 ++#define RRSR_RSC_LOWER_SUBCHANNEL 0x2 ++#define RRSR_RSC_DUPLICATE_MODE 0x3 ++ ++ ++//2 ARFR ++#define USE_SHORT_G1 BIT(20) ++ ++//2 AGGLEN_LMT_L ++#define _AGGLMT_MCS0(x) ((x) & 0xF) ++#define _AGGLMT_MCS1(x) (((x) & 0xF) << 4) ++#define _AGGLMT_MCS2(x) (((x) & 0xF) << 8) ++#define _AGGLMT_MCS3(x) (((x) & 0xF) << 12) ++#define _AGGLMT_MCS4(x) (((x) & 0xF) << 16) ++#define _AGGLMT_MCS5(x) (((x) & 0xF) << 20) ++#define _AGGLMT_MCS6(x) (((x) & 0xF) << 24) ++#define _AGGLMT_MCS7(x) (((x) & 0xF) << 28) ++ ++ ++//2 RL ++#define RETRY_LIMIT_SHORT_SHIFT 8 ++#define RETRY_LIMIT_LONG_SHIFT 0 ++ ++ ++//2 DARFRC ++#define _DARF_RC1(x) ((x) & 0x1F) ++#define _DARF_RC2(x) (((x) & 0x1F) << 8) ++#define _DARF_RC3(x) (((x) & 0x1F) << 16) ++#define _DARF_RC4(x) (((x) & 0x1F) << 24) ++// NOTE: shift starting from address (DARFRC + 4) ++#define _DARF_RC5(x) ((x) & 0x1F) ++#define _DARF_RC6(x) (((x) & 0x1F) << 8) ++#define _DARF_RC7(x) (((x) & 0x1F) << 16) ++#define _DARF_RC8(x) (((x) & 0x1F) << 24) ++ ++ ++//2 RARFRC ++#define _RARF_RC1(x) ((x) & 0x1F) ++#define _RARF_RC2(x) (((x) & 0x1F) << 8) ++#define _RARF_RC3(x) (((x) & 0x1F) << 16) ++#define _RARF_RC4(x) (((x) & 0x1F) << 24) ++// NOTE: shift starting from address (RARFRC + 4) ++#define _RARF_RC5(x) ((x) & 0x1F) ++#define _RARF_RC6(x) (((x) & 0x1F) << 8) ++#define _RARF_RC7(x) (((x) & 0x1F) << 16) ++#define _RARF_RC8(x) (((x) & 0x1F) << 24) ++ ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0500h ~ 0x05FFh EDCA Configuration ++// ++//----------------------------------------------------- ++ ++ ++ ++//2 EDCA setting ++#define AC_PARAM_TXOP_LIMIT_OFFSET 16 ++#define AC_PARAM_ECW_MAX_OFFSET 12 ++#define AC_PARAM_ECW_MIN_OFFSET 8 ++#define AC_PARAM_AIFS_OFFSET 0 ++ ++ ++//2 EDCA_VO_PARAM ++#define _AIFS(x) (x) ++#define _ECW_MAX_MIN(x) ((x) << 8) ++#define _TXOP_LIMIT(x) ((x) << 16) ++ ++ ++#define _BCNIFS(x) ((x) & 0xFF) ++#define _BCNECW(x) (((x) & 0xF))<< 8) ++ ++ ++#define _LRL(x) ((x) & 0x3F) ++#define _SRL(x) (((x) & 0x3F) << 8) ++ ++ ++//2 SIFS_CCK ++#define _SIFS_CCK_CTX(x) ((x) & 0xFF) ++#define _SIFS_CCK_TRX(x) (((x) & 0xFF) << 8); ++ ++ ++//2 SIFS_OFDM ++#define _SIFS_OFDM_CTX(x) ((x) & 0xFF) ++#define _SIFS_OFDM_TRX(x) (((x) & 0xFF) << 8); ++ ++ ++//2 TBTT PROHIBIT ++#define _TBTT_PROHIBIT_HOLD(x) (((x) & 0xFF) << 8) ++ ++ ++//2 REG_RD_CTRL ++#define DIS_EDCA_CNT_DWN BIT(11) ++ ++ ++//2 BCN_CTRL ++#define EN_MBSSID BIT(1) ++#define EN_TXBCN_RPT BIT(2) ++#define EN_BCN_FUNCTION BIT(3) ++// The same function but different bit field. ++#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4) ++#define DIS_TSF_UDT0_TEST_CHIP BIT(5) ++ ++//2 ACMHWCTRL ++#define AcmHw_HwEn BIT(0) ++#define AcmHw_BeqEn BIT(1) ++#define AcmHw_ViqEn BIT(2) ++#define AcmHw_VoqEn BIT(3) ++#define AcmHw_BeqStatus BIT(4) ++#define AcmHw_ViqStatus BIT(5) ++#define AcmHw_VoqStatus BIT(6) ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0600h ~ 0x07FFh WMAC Configuration ++// ++//----------------------------------------------------- ++ ++//2 APSD_CTRL ++#define APSDOFF BIT(6) ++#define APSDOFF_STATUS BIT(7) ++ ++ ++//2 BWOPMODE ++#define BW_20MHZ BIT(2) ++//#define BW_OPMODE_20MHZ BIT(2) // For compability ++ ++ ++#define RATE_BITMAP_ALL 0xFFFFF ++ ++// Only use CCK 1M rate for ACK ++#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1 ++ ++//2 TCR ++#define TSFRST BIT(0) ++#define DIS_GCLK BIT(1) ++#define PAD_SEL BIT(2) ++#define PWR_ST BIT(6) ++#define PWRBIT_OW_EN BIT(7) ++#define ACRC BIT(8) ++#define CFENDFORM BIT(9) ++#define ICV BIT(10) ++ ++ ++ ++//2 RCR ++#define AAP BIT(0) ++#define APM BIT(1) ++#define AM BIT(2) ++#define AB BIT(3) ++#define ADD3 BIT(4) ++#define APWRMGT BIT(5) ++#define CBSSID BIT(6) ++#define CBSSID_BCN BIT(7) ++#define ACRC32 BIT(8) ++#define AICV BIT(9) ++#define ADF BIT(11) ++#define ACF BIT(12) ++#define AMF BIT(13) ++#define HTC_LOC_CTRL BIT(14) ++#define UC_DATA_EN BIT(16) ++#define BM_DATA_EN BIT(17) ++#define MFBEN BIT(22) ++#define LSIGEN BIT(23) ++#define EnMBID BIT(24) ++#define APP_BASSN BIT(27) ++#define APP_PHYSTS BIT(28) ++#define APP_ICV BIT(29) ++#define APP_MIC BIT(30) ++#define APP_FCS BIT(31) ++ ++//2 RX_PKT_LIMIT ++ ++//2 RX_DLK_TIME ++ ++//2 MBIDCAMCFG ++ ++ ++ ++//2 AMPDU_MIN_SPACE ++#define _MIN_SPACE(x) ((x) & 0x7) ++#define _SHORT_GI_PADDING(x) (((x) & 0x1F) << 3) ++ ++ ++//2 RXERR_RPT ++#define RXERR_TYPE_OFDM_PPDU 0 ++#define RXERR_TYPE_OFDM_FALSE_ALARM 1 ++#define RXERR_TYPE_OFDM_MPDU_OK 2 ++#define RXERR_TYPE_OFDM_MPDU_FAIL 3 ++#define RXERR_TYPE_CCK_PPDU 4 ++#define RXERR_TYPE_CCK_FALSE_ALARM 5 ++#define RXERR_TYPE_CCK_MPDU_OK 6 ++#define RXERR_TYPE_CCK_MPDU_FAIL 7 ++#define RXERR_TYPE_HT_PPDU 8 ++#define RXERR_TYPE_HT_FALSE_ALARM 9 ++#define RXERR_TYPE_HT_MPDU_TOTAL 10 ++#define RXERR_TYPE_HT_MPDU_OK 11 ++#define RXERR_TYPE_HT_MPDU_FAIL 12 ++#define RXERR_TYPE_RX_FULL_DROP 15 ++ ++#define RXERR_COUNTER_MASK 0xFFFFF ++#define RXERR_RPT_RST BIT(27) ++#define _RXERR_RPT_SEL(type) ((type) << 28) ++ ++ ++//2 SECCFG ++#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key ++#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key ++#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption ++#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption ++#define SCR_SKByA2 BIT(4) //Search kEY BY A2 ++#define SCR_NoSKMC BIT(5) //No Key Search Multicast ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++ ++//2 USB Information (0xFE17) ++#define USB_IS_HIGH_SPEED 0 ++#define USB_IS_FULL_SPEED 1 ++#define USB_SPEED_MASK BIT(5) ++ ++#define USB_NORMAL_SIE_EP_MASK 0xF ++#define USB_NORMAL_SIE_EP_SHIFT 4 ++ ++#define USB_TEST_EP_MASK 0x30 ++#define USB_TEST_EP_SHIFT 4 ++ ++//2 Special Option ++#define USB_AGG_EN BIT(3) ++ ++ ++//2REG_C2HEVT_CLEAR ++#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message ++#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. ++ ++ ++//2REG_MULTI_FUNC_CTRL(For RTL8723 Only) ++#define WL_HWPDN_EN BIT0 // Enable GPIO[9] as WiFi HW PDn source ++#define WL_HWPDN_SL BIT1 // WiFi HW PDn polarity control ++#define WL_FUNC_EN BIT2 // WiFi function enable ++#define WL_HWROF_EN BIT3 // Enable GPIO[9] as WiFi RF HW PDn source ++#define BT_HWPDN_EN BIT16 // Enable GPIO[11] as BT HW PDn source ++#define BT_HWPDN_SL BIT17 // BT HW PDn polarity control ++#define BT_FUNC_EN BIT18 // BT function enable ++#define BT_HWROF_EN BIT19 // Enable GPIO[11] as BT/GPS RF HW PDn source ++#define GPS_HWPDN_EN BIT20 // Enable GPIO[10] as GPS HW PDn source ++#define GPS_HWPDN_SL BIT21 // GPS HW PDn polarity control ++#define GPS_FUNC_EN BIT22 // GPS function enable ++ ++//3 REG_LIFECTRL_CTRL ++#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3 ++#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2 ++#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1 ++#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0 ++ ++#define HAL92C_MSDU_LIFE_TIME_UNIT 128 // in us, said by Tim. ++ ++//======================================================== ++// General definitions ++//======================================================== ++ ++#define MAC_ADDR_LEN 6 ++#define LAST_ENTRY_OF_TX_PKT_BUFFER 255 ++ ++#define POLLING_LLT_THRESHOLD 20 ++#define POLLING_READY_TIMEOUT_COUNT 1000 ++ ++// Min Spacing related settings. ++#define MAX_MSS_DENSITY_2T 0x13 ++#define MAX_MSS_DENSITY_1T 0x0A ++ ++//---------------------------------------------------------------------------- ++// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIOSEL_GPIO 0 ++#define GPIOSEL_ENBT BIT5 ++ ++//---------------------------------------------------------------------------- ++// 8192C GPIO PIN Control Register (offset 0x44, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value ++#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value ++#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. ++#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) ++ ++ ++ ++#include "basic_types.h" ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_sreset.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_sreset.h +new file mode 100644 +index 000000000000..6f5b953a8ae9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_sreset.h +@@ -0,0 +1,32 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192C_SRESET_C_ ++#define _RTL8192C_SRESET_C_ ++ ++#include ++#include ++#include ++#include ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++extern void rtl8192c_sreset_xmit_status_check(_adapter *padapter); ++extern void rtl8192c_sreset_linked_status_check(_adapter *padapter); ++#endif ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_xmit.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_xmit.h +new file mode 100644 +index 000000000000..9abbae984edd +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192c_xmit.h +@@ -0,0 +1,128 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192C_XMIT_H_ ++#define _RTL8192C_XMIT_H_ ++ ++// ++// Queue Select Value in TxDesc ++// ++#define QSLT_BK 0x2//0x01 ++#define QSLT_BE 0x0 ++#define QSLT_VI 0x5//0x4 ++#define QSLT_VO 0x7//0x6 ++#define QSLT_BEACON 0x10 ++#define QSLT_HIGH 0x11 ++#define QSLT_MGNT 0x12 ++#define QSLT_CMD 0x13 ++ ++struct txrpt_ccx_8192c { ++ /* offset 0 */ ++ u8 retry_cnt:6; ++ u8 rsvd_0:2; ++ ++ /* offset 1 */ ++ u8 rts_retry_cnt:6; ++ u8 rsvd_1:2; ++ ++ /* offset 2 */ ++ u8 ccx_qtime0; ++ u8 ccx_qtime1; ++ ++ /* offset 4 */ ++ u8 missed_pkt_num:5; ++ u8 rsvd_4:3; ++ ++ /* offset 5 */ ++ u8 mac_id:5; ++ u8 des1_fragssn:3; ++ ++ /* offset 6 */ ++ u8 rpt_pkt_num:5; ++ u8 pkt_drop:1; ++ u8 lifetime_over:1; ++ u8 retry_over:1; ++ ++ /* offset 7*/ ++ u8 edca_tx_queue:4; ++ u8 rsvd_7:1; ++ u8 bmc:1; ++ u8 pkt_ok:1; ++ u8 int_ccx:1; ++}; ++ ++#define txrpt_ccx_qtime_8192c(txrpt_ccx) ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8)) ++ ++#ifdef CONFIG_XMIT_ACK ++void dump_txrpt_ccx_8192c(void *buf); ++void handle_txrpt_ccx_8192c(_adapter *adapter, void *buf); ++#else ++#define dump_txrpt_ccx_8192c(buf) do {} while(0) ++#define handle_txrpt_ccx_8192c(adapter, buf) do {} while(0) ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++#define MAX_TX_AGG_PACKET_NUMBER 0xFF ++#endif ++ ++s32 rtl8192cu_init_xmit_priv(_adapter * padapter); ++ ++void rtl8192cu_free_xmit_priv(_adapter * padapter); ++ ++void rtl8192cu_cal_txdesc_chksum(struct tx_desc *ptxdesc); ++ ++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf); ++ ++s32 rtl8192cu_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe); ++ ++s32 rtl8192cu_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++s32 rtl8192cu_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtl8192cu_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt); ++#endif ++ ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++s32 rtl8192ce_init_xmit_priv(_adapter * padapter); ++void rtl8192ce_free_xmit_priv(_adapter * padapter); ++ ++s32 rtl8192ce_enqueue_xmitbuf(struct rtw_tx_ring *ring, struct xmit_buf *pxmitbuf); ++struct xmit_buf *rtl8192ce_dequeue_xmitbuf(struct rtw_tx_ring *ring); ++ ++void rtl8192ce_xmitframe_resume(_adapter *padapter); ++ ++s32 rtl8192ce_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe); ++ ++s32 rtl8192ce_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++s32 rtl8192ce_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtl8192ce_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt); ++#endif ++ ++#endif ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_cmd.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_cmd.h +new file mode 100644 +index 000000000000..8a8873af0648 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_cmd.h +@@ -0,0 +1,140 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192D_CMD_H_ ++#define __RTL8192D_CMD_H_ ++ ++ ++//-------------------------------------------- ++//3 Host Message Box ++//-------------------------------------------- ++ ++// User Define Message [31:8] ++ ++//_SETPWRMODE_PARM ++#define SET_H2CCMD_PWRMODE_PARM_MODE(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value) ++#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value) ++#define SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+2, 0, 8, __Value) ++ ++//JOINBSSRPT_PARM ++#define SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value) ++ ++//_RSVDPAGE_LOC ++#define SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value) ++#define SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value) ++#define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE((__pH2CCmd)+2, 0, 8, __Value) ++ ++//P2P_PS_OFFLOAD ++ ++struct P2P_PS_Offload_t { ++ unsigned char Offload_En:1; ++ unsigned char role:1; // 1: Owner, 0: Client ++ unsigned char CTWindow_En:1; ++ unsigned char NoA0_En:1; ++ unsigned char NoA1_En:1; ++ unsigned char AllStaSleep:1; // Only valid in Owner ++ unsigned char discovery:1; ++ unsigned char rsvd:1; ++}; ++ ++#define SET_H2CCMD_P2P_PS_OFFLOAD_EN(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_ROLE(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 1, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_CTW(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 2, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_NOA0(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 3, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_NOA1(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 4, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_ALLSTASLEEP(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 5, 1, __Value) ++#define SET_H2CCMD_P2P_PS_OFFLOAD_DISCOVERY(__pH2CCmd, __Value) SET_BITS_TO_LE_1BYTE(__pH2CCmd, 6, 1, __Value) ++ ++// Description: Determine the types of H2C commands that are the same in driver and Fw. ++// Fisrt constructed by tynli. 2009.10.09. ++typedef enum _RTL8192D_H2C_CMD ++{ ++ H2C_AP_OFFLOAD = 0, /*0*/ ++ H2C_SETPWRMODE = 1, /*1*/ ++ H2C_JOINBSSRPT = 2, /*2*/ ++ H2C_RSVDPAGE = 3, ++ H2C_RSSI_REPORT = 5, ++ H2C_RA_MASK = 6, ++ H2C_P2P_PS_OFFLOAD = 8, ++ H2C_MAC_MODE_SEL = 9, ++ H2C_PWRM=15, ++#ifdef CONFIG_WOWLAN ++ H2C_WO_WLAN_CMD = 20, // Wake on Wlan. ++#endif // CONFIG_WOWLAN ++ H2C_P2P_PS_CTW_CMD = 24, ++ H2C_PathDiv = 26, //PathDiv--NeilChen--2011.07.15 ++#ifdef CONFIG_WOWLAN ++ KEEP_ALIVE_CONTROL_CMD=31, //keep alive for wake on wlan ++ DISCONNECT_DECISION_CTRL_CMD=32, ++ REMOTE_WAKE_CTRL_CMD=34, ++#endif // CONFIG_WOWLAN ++ H2C_92D_TSF_SYNC=36, ++ H2C_92D_RESET_TSF = 43, ++ H2C_CMD_MAX ++}RTL8192D_H2C_CMD; ++ ++struct cmd_msg_parm { ++ u8 eid; //element id ++ u8 sz; // sz ++ u8 buf[6]; ++}; ++ ++ ++void FillH2CCmd92D(_adapter* padapter, u8 ElementID, u32 CmdLen, u8* pCmdBuffer); ++ ++// host message to firmware cmd ++void rtl8192d_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode); ++void rtl8192d_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus); ++u8 rtl8192d_set_rssi_cmd(_adapter*padapter, u8 *param); ++u8 rtl8192d_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg); ++void rtl8192d_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg); ++#ifdef CONFIG_P2P ++void rtl8192d_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state); ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_TSF_RESET_OFFLOAD ++int reset_tsf(PADAPTER Adapter, u8 reset_port ); ++#endif // CONFIG_TSF_RESET_OFFLOAD ++ ++#ifdef CONFIG_WOWLAN ++typedef struct _SETWOWLAN_PARM{ ++ u8 mode; ++ u8 gpio_index; ++ u8 gpio_duration; ++ u8 second_mode; ++ u8 reserve; ++}SETWOWLAN_PARM, *PSETWOWLAN_PARM; ++ ++#define FW_WOWLAN_FUN_EN BIT(0) ++#define FW_WOWLAN_PATTERN_MATCH BIT(1) ++#define FW_WOWLAN_MAGIC_PKT BIT(2) ++#define FW_WOWLAN_UNICAST BIT(3) ++#define FW_WOWLAN_ALL_PKT_DROP BIT(4) ++#define FW_WOWLAN_GPIO_ACTIVE BIT(5) ++#define FW_WOWLAN_REKEY_WAKEUP BIT(6) ++#define FW_WOWLAN_DEAUTH_WAKEUP BIT(7) ++ ++#define FW_WOWLAN_GPIO_WAKEUP_EN BIT(0) ++#define FW_FW_PARSE_MAGIC_PKT BIT(1) ++ ++void rtl8192d_set_wowlan_cmd(_adapter* padapter); ++void SetFwRelatedForWoWLAN8192DU(_adapter* padapter,u8 bHostIsGoingtoSleep); ++#endif // CONFIG_WOWLAN ++ ++#endif // __RTL8192D_CMD_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_dm.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_dm.h +new file mode 100644 +index 000000000000..eaf1e4f5e07a +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_dm.h +@@ -0,0 +1,420 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192D_DM_H__ ++#define __RTL8192D_DM_H__ ++//============================================================ ++// Description: ++// ++// This file is for 92CE/92CU dynamic mechanism only ++// ++// ++//============================================================ ++//============================================================ ++// Global var ++//============================================================ ++ ++extern u32 EDCAParam[maxAP][3] ; ++ ++//============================================================ ++// structure and define ++//============================================================ ++ ++typedef struct _FALSE_ALARM_STATISTICS{ ++ u32 Cnt_Parity_Fail; ++ u32 Cnt_Rate_Illegal; ++ u32 Cnt_Crc8_fail; ++ u32 Cnt_Mcs_fail; ++ u32 Cnt_Ofdm_fail; ++ u32 Cnt_Cck_fail; ++ u32 Cnt_all; ++ u32 Cnt_Fast_Fsync; ++ u32 Cnt_SB_Search_fail; ++}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; ++ ++typedef struct _Dynamic_Power_Saving_ ++{ ++ u8 PreCCAState; ++ u8 CurCCAState; ++ ++ u8 PreRFState; ++ u8 CurRFState; ++ ++ //int Rssi_val_min; ++ ++}PS_T,*pPS_T; ++ ++typedef struct _Dynamic_Initial_Gain_Threshold_ ++{ ++ u8 Dig_Enable_Flag; ++ u8 Dig_Ext_Port_Stage; ++ ++ int RssiLowThresh; ++ int RssiHighThresh; ++ ++ u32 FALowThresh; ++ u32 FAHighThresh; ++ ++ u8 CurSTAConnectState; ++ u8 PreSTAConnectState; ++ u8 CurMultiSTAConnectState; ++ ++ u8 PreIGValue; ++ u8 CurIGValue; ++ u8 BackupIGValue; ++ ++ char BackoffVal; ++ char BackoffVal_range_max; ++ char BackoffVal_range_min; ++ u8 rx_gain_range_max; ++ u8 rx_gain_range_min; ++ u8 Rssi_val_min; ++ ++ u8 PreCCKPDState; ++ u8 CurCCKPDState; ++ ++ u8 LargeFAHit; ++ u8 ForbiddenIGI; ++ u32 Recover_cnt; ++ u8 rx_gain_range_min_nolink; ++}DIG_T,*pDIG_T; ++ ++typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition ++{ ++ DIG_TYPE_THRESH_HIGH = 0, ++ DIG_TYPE_THRESH_LOW = 1, ++ DIG_TYPE_BACKOFF = 2, ++ DIG_TYPE_RX_GAIN_MIN = 3, ++ DIG_TYPE_RX_GAIN_MAX = 4, ++ DIG_TYPE_ENABLE = 5, ++ DIG_TYPE_DISABLE = 6, ++ DIG_OP_TYPE_MAX ++}DM_DIG_OP_E; ++ ++typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition ++{ ++ CCK_PD_STAGE_LowRssi = 0, ++ CCK_PD_STAGE_HighRssi = 1, ++ CCK_PD_STAGE_MAX = 3, ++}DM_CCK_PDTH_E; ++ ++typedef enum tag_1R_CCA_Type_Definition ++{ ++ CCA_MIN = 0, ++ CCA_1R =1, ++ CCA_2R = 2, ++ CCA_MAX = 3, ++}DM_1R_CCA_E; ++ ++typedef enum tag_RF_Type_Definition ++{ ++ RF_Save =0, ++ RF_Normal = 1, ++ RF_MAX = 2, ++}DM_RF_E; ++ ++typedef enum tag_DIG_EXT_PORT_ALGO_Definition ++{ ++ DIG_EXT_PORT_STAGE_0 = 0, ++ DIG_EXT_PORT_STAGE_1 = 1, ++ DIG_EXT_PORT_STAGE_2 = 2, ++ DIG_EXT_PORT_STAGE_3 = 3, ++ DIG_EXT_PORT_STAGE_MAX = 4, ++}DM_DIG_EXT_PORT_ALG_E; ++ ++ ++typedef enum tag_DIG_Connect_Definition ++{ ++ DIG_STA_DISCONNECT = 0, ++ DIG_STA_CONNECT = 1, ++ DIG_STA_BEFORE_CONNECT = 2, ++ DIG_MultiSTA_DISCONNECT = 3, ++ DIG_MultiSTA_CONNECT = 4, ++ DIG_CONNECT_MAX ++}DM_DIG_CONNECT_E; ++ ++ ++#define DM_DIG_THRESH_HIGH 40 ++#define DM_DIG_THRESH_LOW 35 ++ ++#define DM_FALSEALARM_THRESH_LOW 400 ++#define DM_FALSEALARM_THRESH_HIGH 1000 ++ ++#define DM_DIG_MAX 0x3e ++#define DM_DIG_MIN 0x1e //0x22//0x1c ++ ++#define DM_DIG_FA_UPPER 0x32 ++#define DM_DIG_FA_LOWER 0x20 ++ ++//vivi 92c&92d has different definition, 20110504 ++//this is for 92c ++#define DM_DIG_FA_TH0 0x200//0x20 ++#define DM_DIG_FA_TH1 0x300//0x100 ++#define DM_DIG_FA_TH2 0x400//0x200 ++//this is for 92d ++#define DM_DIG_FA_TH0_92D 0x100 ++#define DM_DIG_FA_TH1_92D 0x150 ++#define DM_DIG_FA_TH2_92D 0x250 ++ ++#define DM_DIG_BACKOFF_MAX 12 ++#define DM_DIG_BACKOFF_MIN (-4) ++#define DM_DIG_BACKOFF_DEFAULT 10 ++ ++#define RxPathSelection_SS_TH_low 30 ++#define RxPathSelection_diff_TH 18 ++ ++#define DM_RATR_STA_INIT 0 ++#define DM_RATR_STA_HIGH 1 ++#define DM_RATR_STA_MIDDLE 2 ++#define DM_RATR_STA_LOW 3 ++ ++#define CTSToSelfTHVal 30 ++#define RegC38_TH 20 ++ ++#define WAIotTHVal 25 ++ ++//Dynamic Tx Power Control Threshold ++#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74 ++#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67 ++ ++#define TxHighPwrLevel_Normal 0 ++#define TxHighPwrLevel_Level1 1 ++#define TxHighPwrLevel_Level2 2 ++#define TxHighPwrLevel_BT1 3 ++#define TxHighPwrLevel_BT2 4 ++#define TxHighPwrLevel_15 5 ++#define TxHighPwrLevel_35 6 ++#define TxHighPwrLevel_50 7 ++#define TxHighPwrLevel_70 8 ++#define TxHighPwrLevel_100 9 ++ ++#define DM_Type_ByFW 0 ++#define DM_Type_ByDriver 1 ++ ++typedef struct _RATE_ADAPTIVE ++{ ++ u8 RateAdaptiveDisabled; ++ u8 RATRState; ++ u16 reserve; ++ ++ u32 HighRSSIThreshForRA; ++ u32 High2LowRSSIThreshForRA; ++ u8 Low2HighRSSIThreshForRA40M; ++ u32 LowRSSIThreshForRA40M; ++ u8 Low2HighRSSIThreshForRA20M; ++ u32 LowRSSIThreshForRA20M; ++ u32 UpperRSSIThresholdRATR; ++ u32 MiddleRSSIThresholdRATR; ++ u32 LowRSSIThresholdRATR; ++ u32 LowRSSIThresholdRATR40M; ++ u32 LowRSSIThresholdRATR20M; ++ u8 PingRSSIEnable; //cosa add for Netcore long range ping issue ++ u32 PingRSSIRATR; //cosa add for Netcore long range ping issue ++ u32 PingRSSIThreshForRA;//cosa add for Netcore long range ping issue ++ u32 LastRATR; ++ u8 PreRATRState; ++ ++} RATE_ADAPTIVE, *PRATE_ADAPTIVE; ++ ++typedef enum tag_SW_Antenna_Switch_Definition ++{ ++ Antenna_B = 1, ++ Antenna_A = 2, ++ Antenna_MAX = 3, ++}DM_SWAS_E; ++ ++// 20100514 Joseph: Add definition for antenna switching test after link. ++// This indicates two different the steps. ++// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. ++// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK ++// with original RSSI to determine if it is necessary to switch antenna. ++#define SWAW_STEP_PEAK 0 ++#define SWAW_STEP_DETERMINE 1 ++ ++#define TP_MODE 0 ++#define RSSI_MODE 1 ++#define TRAFFIC_LOW 0 ++#define TRAFFIC_HIGH 1 ++ ++//============================= ++//Neil Chen---2011--06--15-- ++//============================== ++//3 PathDiv ++typedef struct _SW_Antenna_Switch_ ++{ ++ u8 try_flag; ++ s32 PreRSSI; ++ u8 CurAntenna; ++ u8 PreAntenna; ++ u8 RSSI_Trying; ++ u8 TestMode; ++ u8 bTriggerAntennaSwitch; ++ u8 SelectAntennaMap; ++ ++ // Before link Antenna Switch check ++ u8 SWAS_NoLink_State; ++ u32 SWAS_NoLink_BK_Reg860; ++}SWAT_T, *pSWAT_T; ++//======================================== ++ ++struct dm_priv ++{ ++ u8 DM_Type; ++ u8 DMFlag, DMFlag_tmp; ++ ++ //for DIG ++ u8 bDMInitialGainEnable; ++ //u8 binitialized; // for dm_initial_gain_Multi_STA use. ++ DIG_T DM_DigTable; ++ ++ PS_T DM_PSTable; ++ ++ FALSE_ALARM_STATISTICS FalseAlmCnt; ++ ++ //for rate adaptive, in fact, 88c/92c fw will handle this ++ u8 bUseRAMask; ++ RATE_ADAPTIVE RateAdaptive; ++ ++ //* Upper and Lower Signal threshold for Rate Adaptive*/ ++ int UndecoratedSmoothedPWDB; ++ int EntryMinUndecoratedSmoothedPWDB; ++ int EntryMaxUndecoratedSmoothedPWDB; ++ int MinUndecoratedPWDBForDM; ++ int LastMinUndecoratedPWDBForDM; ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ int RssiValMinForAnotherMacOfDMSP; ++ u32 CurDigValueForAnotherMacOfDMSP; ++ BOOLEAN bWriteDigForAnotherMacOfDMSP; ++ BOOLEAN bChangeCCKPDStateForAnotherMacOfDMSP; ++ u8 CurCCKPDStateForAnotherMacOfDMSP; ++ BOOLEAN bChangeTxHighPowerLvlForAnotherMacOfDMSP; ++ u8 CurTxHighLvlForAnotherMacOfDMSP; ++#endif ++ ++ //for High Power ++ u8 bDynamicTxPowerEnable; ++ u8 LastDTPLvl; ++ u8 DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06 ++ ++ //for tx power tracking ++ u8 bTXPowerTracking; ++ u8 TXPowercount; ++ u8 bTXPowerTrackingInit; ++ u8 TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default ++ u8 TM_Trigger; ++ ++ u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1 ++ u8 ThermalValue; ++ u8 ThermalValue_LCK; ++ u8 ThermalValue_IQK; ++ u8 ThermalValue_AVG[AVG_THERMAL_NUM]; ++ u8 ThermalValue_AVG_index; ++ u8 ThermalValue_RxGain; ++ u8 ThermalValue_Crystal; ++ u8 Delta_IQK; ++ u8 Delta_LCK; ++ u8 bRfPiEnable; ++ u8 bReloadtxpowerindex; ++ u8 bDoneTxpower; ++ ++ //for APK ++ u32 APKoutput[2][2]; //path A/B; output1_1a/output1_2a ++ u8 bAPKdone; ++ u8 bAPKThermalMeterIgnore; ++ BOOLEAN bDPKdone[2]; ++ BOOLEAN bDPKstore; ++ BOOLEAN bDPKworking; ++ u8 OFDM_min_index_internalPA_DPK[2]; ++ u8 TxPowerLevelDPK[2]; ++ ++ u32 RegA24; ++ ++ //for IQK ++ u32 Reg874; ++ u32 RegC08; ++ u32 Reg88C; ++ u8 Reg522; ++ u8 Reg550; ++ u8 Reg551; ++ u32 Reg870; ++ u32 ADDA_backup[IQK_ADDA_REG_NUM]; ++ u32 IQK_MAC_backup[IQK_MAC_REG_NUM]; ++ u32 IQK_BB_backup[IQK_BB_REG_NUM]; ++ ++ u8 bCCKinCH14; ++ ++ char CCK_index; ++ //u8 Record_CCK_20Mindex; ++ //u8 Record_CCK_40Mindex; ++ char OFDM_index[2]; ++ ++ SWAT_T DM_SWAT_Table; ++ ++ //for TxPwrTracking ++ int RegE94; ++ int RegE9C; ++ int RegEB4; ++ int RegEBC; ++#if MP_DRIVER == 1 ++ u8 RegC04_MP; ++ u32 RegD04_MP; ++#endif ++ u32 TXPowerTrackingCallbackCnt; //cosa add for debug ++ ++ u32 prv_traffic_idx; // edca turbo ++ ++ u32 RegRF3C[2]; //pathA / pathB ++ ++ // Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas ++ u8 INIDATA_RATE[32]; ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ /* Ported from ODM, for ESTI Adaptivity test */ ++ s8 TH_L2H_ini; ++ s8 TH_EDCCA_HL_diff; ++ s8 IGI_Base; ++ u8 IGI_target; ++ bool ForceEDCCA; ++ u8 AdapEn_RSSI; ++ s8 Force_TH_H; ++ s8 Force_TH_L; ++ u8 IGI_LowerBound; ++ ++ bool bPreEdccaEnable; ++#endif ++}; ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export Marco Definition---------------------------*/ ++//#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;} ++ ++ ++//============================================================ ++// function prototype ++//============================================================ ++void rtl8192d_init_dm_priv(IN PADAPTER Adapter); ++void rtl8192d_deinit_dm_priv(IN PADAPTER Adapter); ++void rtl8192d_InitHalDm(IN PADAPTER Adapter); ++void rtl8192d_HalDmWatchDog(IN PADAPTER Adapter); ++ ++VOID rtl8192d_dm_CheckTXPowerTracking(IN PADAPTER Adapter); ++ ++#endif //__HAL8190PCIDM_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_hal.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_hal.h +new file mode 100644 +index 000000000000..347337c48c9f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_hal.h +@@ -0,0 +1,1125 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192D_HAL_H__ ++#define __RTL8192D_HAL_H__ ++ ++#include "hal_com.h" ++#include "rtl8192d_spec.h" ++#include "Hal8192DPhyReg.h" ++#include "Hal8192DPhyCfg.h" ++#include "rtl8192d_rf.h" ++#include "rtl8192d_dm.h" ++#include "rtl8192d_recv.h" ++#include "rtl8192d_xmit.h" ++#include "rtl8192d_cmd.h" ++ ++/*---------------------------Define Local Constant---------------------------*/ ++/* Channel switch:The size of command tables for switch channel*/ ++#define MAX_PRECMD_CNT 16 ++#define MAX_RFDEPENDCMD_CNT 16 ++#define MAX_POSTCMD_CNT 16 ++ ++#define MAX_DOZE_WAITING_TIMES_9x 64 ++ ++#define MAX_RF_IMR_INDEX 12 ++#define MAX_RF_IMR_INDEX_NORMAL 13 ++#define RF_REG_NUM_for_C_CUT_5G 6 ++#define RF_REG_NUM_for_C_CUT_5G_internalPA 7 ++#define RF_REG_NUM_for_C_CUT_2G 5 ++#define RF_CHNL_NUM_5G 19 ++#define RF_CHNL_NUM_5G_40M 17 ++#define TARGET_CHNL_NUM_5G 221 ++#define TARGET_CHNL_NUM_2G 14 ++#define TARGET_CHNL_NUM_2G_5G 59 ++#define CV_CURVE_CNT 64 ++ ++//static u32 RF_REG_FOR_5G_SWCHNL[MAX_RF_IMR_INDEX]={0,0x2f,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x38,0x39,0x0}; ++static u32 RF_REG_FOR_5G_SWCHNL_NORMAL[MAX_RF_IMR_INDEX_NORMAL]={0,0x2f,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x0}; ++ ++static u8 RF_REG_for_C_CUT_5G[RF_REG_NUM_for_C_CUT_5G] = ++ {RF_SYN_G1, RF_SYN_G2, RF_SYN_G3, RF_SYN_G4, RF_SYN_G5, RF_SYN_G6}; ++ ++static u8 RF_REG_for_C_CUT_5G_internalPA[RF_REG_NUM_for_C_CUT_5G_internalPA] = ++ {0x0B, 0x48, 0x49, 0x4B, 0x03, 0x04, 0x0E}; ++static u8 RF_REG_for_C_CUT_2G[RF_REG_NUM_for_C_CUT_2G] = ++ {RF_SYN_G1, RF_SYN_G2, RF_SYN_G3, RF_SYN_G7, RF_SYN_G8}; ++ ++#if DBG ++static u32 RF_REG_MASK_for_C_CUT_2G[RF_REG_NUM_for_C_CUT_2G] = ++ {BIT19|BIT18|BIT17|BIT14|BIT1, BIT10|BIT9, ++ BIT18|BIT17|BIT16|BIT1, BIT2|BIT1, ++ BIT15|BIT14|BIT13|BIT12|BIT11}; ++#endif //amy, temp remove ++static u8 RF_CHNL_5G[RF_CHNL_NUM_5G] = ++ {36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140}; ++static u8 RF_CHNL_5G_40M[RF_CHNL_NUM_5G_40M] = ++ {38,42,46,50,54,58,62,102,106,110,114,118,122,126,130,134,138}; ++ ++static u32 RF_REG_Param_for_C_CUT_5G[5][RF_REG_NUM_for_C_CUT_5G] = { ++ {0xE43BE, 0xFC638, 0x77C0A, 0xDE471, 0xd7110, 0x8EB04}, ++ {0xE43BE, 0xFC078, 0xF7C1A, 0xE0C71, 0xD7550, 0xAEB04}, ++ {0xE43BF, 0xFF038, 0xF7C0A, 0xDE471, 0xE5550, 0xAEB04}, ++ {0xE43BF, 0xFF079, 0xF7C1A, 0xDE471, 0xE5550, 0xAEB04}, ++ {0xE43BF, 0xFF038, 0xF7C1A, 0xDE471, 0xd7550, 0xAEB04}}; ++ ++static u32 RF_REG_Param_for_C_CUT_2G[3][RF_REG_NUM_for_C_CUT_2G] = { ++ {0x643BC, 0xFC038, 0x77C1A, 0x41289, 0x01840}, ++ {0x643BC, 0xFC038, 0x07C1A, 0x41289, 0x01840}, ++ {0x243BC, 0xFC438, 0x07C1A, 0x4128B, 0x0FC41}}; ++ ++#if SWLCK == 1 ++static u32 RF_REG_SYN_G4_for_C_CUT_2G = 0xD1C31&0x7FF; ++#endif ++ ++static u32 RF_REG_Param_for_C_CUT_5G_internalPA[3][RF_REG_NUM_for_C_CUT_5G_internalPA] = { ++ {0x01a00, 0x40443, 0x00eb5, 0x89bec, 0x94a12, 0x94a12, 0x94a12}, ++ {0x01800, 0xc0443, 0x00730, 0x896ee, 0x94a52, 0x94a52, 0x94a52}, ++ {0x01800, 0xc0443, 0x00730, 0x896ee, 0x94a12, 0x94a12, 0x94a12}}; ++ ++ ++ ++//[mode][patha+b][reg] ++static u32 RF_IMR_Param_Normal[1][3][MAX_RF_IMR_INDEX_NORMAL]={{ ++ {0x70000,0x00ff0,0x4400f,0x00ff0,0x0,0x0,0x0,0x0,0x0,0x64888,0xe266c,0x00090,0x22fff},// channel 1-14. ++ {0x70000,0x22880,0x4470f,0x55880,0x00070, 0x88000, 0x0,0x88080,0x70000,0x64a82,0xe466c,0x00090,0x32c9a}, //path 36-64 ++ {0x70000,0x44880,0x4477f,0x77880,0x00070, 0x88000, 0x0,0x880b0,0x0,0x64b82,0xe466c,0x00090,0x32c9a} //100 -165 ++} ++}; ++ ++//static u32 CurveIndex_5G[TARGET_CHNL_NUM_5G]={0}; ++//static u32 CurveIndex_2G[TARGET_CHNL_NUM_2G]={0}; ++static u32 CurveIndex[TARGET_CHNL_NUM_2G_5G]={0}; ++ ++static u32 TargetChnl_5G[TARGET_CHNL_NUM_5G] = { ++25141, 25116, 25091, 25066, 25041, ++25016, 24991, 24966, 24941, 24917, ++24892, 24867, 24843, 24818, 24794, ++24770, 24765, 24721, 24697, 24672, ++24648, 24624, 24600, 24576, 24552, ++24528, 24504, 24480, 24457, 24433, ++24409, 24385, 24362, 24338, 24315, ++24291, 24268, 24245, 24221, 24198, ++24175, 24151, 24128, 24105, 24082, ++24059, 24036, 24013, 23990, 23967, ++23945, 23922, 23899, 23876, 23854, ++23831, 23809, 23786, 23764, 23741, ++23719, 23697, 23674, 23652, 23630, ++23608, 23586, 23564, 23541, 23519, ++23498, 23476, 23454, 23432, 23410, ++23388, 23367, 23345, 23323, 23302, ++23280, 23259, 23237, 23216, 23194, ++23173, 23152, 23130, 23109, 23088, ++23067, 23046, 23025, 23003, 22982, ++22962, 22941, 22920, 22899, 22878, ++22857, 22837, 22816, 22795, 22775, ++22754, 22733, 22713, 22692, 22672, ++22652, 22631, 22611, 22591, 22570, ++22550, 22530, 22510, 22490, 22469, ++22449, 22429, 22409, 22390, 22370, ++22350, 22336, 22310, 22290, 22271, ++22251, 22231, 22212, 22192, 22173, ++22153, 22134, 22114, 22095, 22075, ++22056, 22037, 22017, 21998, 21979, ++21960, 21941, 21921, 21902, 21883, ++21864, 21845, 21826, 21807, 21789, ++21770, 21751, 21732, 21713, 21695, ++21676, 21657, 21639, 21620, 21602, ++21583, 21565, 21546, 21528, 21509, ++21491, 21473, 21454, 21436, 21418, ++21400, 21381, 21363, 21345, 21327, ++21309, 21291, 21273, 21255, 21237, ++21219, 21201, 21183, 21166, 21148, ++21130, 21112, 21095, 21077, 21059, ++21042, 21024, 21007, 20989, 20972, ++25679, 25653, 25627, 25601, 25575, ++25549, 25523, 25497, 25471, 25446, ++25420, 25394, 25369, 25343, 25318, ++25292, 25267, 25242, 25216, 25191, ++25166 }; ++ ++static u32 TargetChnl_2G[TARGET_CHNL_NUM_2G] = { // channel 1~14 ++26084, 26030, 25976, 25923, 25869, 25816, 25764, ++25711, 25658, 25606, 25554, 25502, 25451, 25328 ++}; ++ ++ ++#ifdef CONFIG_PCI_HCI ++ #include ++ #include "Hal8192DEHWImg.h" ++ ++ #define RTL819X_DEFAULT_RF_TYPE RF_2T2R ++ ++//--------------------------------------------------------------------- ++// RTL8192DE From file ++//--------------------------------------------------------------------- ++ #define RTL8192D_FW_IMG "rtl8192DE\\rtl8192dfw.bin" ++ ++ #define RTL8192D_PHY_REG "rtl8192DE\\PHY_REG.txt" ++ #define RTL8192D_PHY_REG_PG "rtl8192DE\\PHY_REG_PG.txt" ++ #define RTL8192D_PHY_REG_MP "rtl8192DE\\PHY_REG_MP.txt" ++ ++ #define RTL8192D_AGC_TAB "rtl8192DE\\AGC_TAB.txt" ++ #define RTL8192D_AGC_TAB_2G "rtl8192DE\\AGC_TAB_2G.txt" ++ #define RTL8192D_AGC_TAB_5G "rtl8192DE\\AGC_TAB_5G.txt" ++ #define RTL8192D_PHY_RADIO_A "rtl8192DE\\radio_a.txt" ++ #define RTL8192D_PHY_RADIO_B "rtl8192DE\\radio_b.txt" ++ #define RTL8192D_PHY_RADIO_A_intPA "rtl8192DE\\radio_a_intPA.txt" ++ #define RTL8192D_PHY_RADIO_B_intPA "rtl8192DE\\radio_b_intPA.txt" ++ #define RTL8192D_PHY_MACREG "rtl8192DE\\MAC_REG.txt" ++ ++//--------------------------------------------------------------------- ++// RTL8192DE From header ++//--------------------------------------------------------------------- ++ ++ // Fw Array ++ #define Rtl8192D_FwImageArray Rtl8192DEFwImgArray ++ ++ // MAC/BB/PHY Array ++ #define Rtl8192D_MAC_Array Rtl8192DEMAC_2T_Array ++ #define Rtl8192D_AGCTAB_Array Rtl8192DEAGCTAB_Array ++ #define Rtl8192D_AGCTAB_5GArray Rtl8192DEAGCTAB_5GArray ++ #define Rtl8192D_AGCTAB_2GArray Rtl8192DEAGCTAB_2GArray ++ #define Rtl8192D_AGCTAB_2TArray Rtl8192DEAGCTAB_2TArray ++ #define Rtl8192D_AGCTAB_1TArray Rtl8192DEAGCTAB_1TArray ++ #define Rtl8192D_PHY_REG_2TArray Rtl8192DEPHY_REG_2TArray ++ #define Rtl8192D_PHY_REG_1TArray Rtl8192DEPHY_REG_1TArray ++ #define Rtl8192D_PHY_REG_Array_PG Rtl8192DEPHY_REG_Array_PG ++ #define Rtl8192D_PHY_REG_Array_MP Rtl8192DEPHY_REG_Array_MP ++ #define Rtl8192D_RadioA_2TArray Rtl8192DERadioA_2TArray ++ #define Rtl8192D_RadioA_1TArray Rtl8192DERadioA_1TArray ++ #define Rtl8192D_RadioB_2TArray Rtl8192DERadioB_2TArray ++ #define Rtl8192D_RadioB_1TArray Rtl8192DERadioB_1TArray ++ #define Rtl8192D_RadioA_2T_intPAArray Rtl8192DERadioA_2T_intPAArray ++ #define Rtl8192D_RadioB_2T_intPAArray Rtl8192DERadioB_2T_intPAArray ++ ++ // Array length ++ #define Rtl8192D_FwImageArrayLength Rtl8192DEImgArrayLength ++ #define Rtl8192D_MAC_ArrayLength Rtl8192DEMAC_2T_ArrayLength ++ #define Rtl8192D_AGCTAB_5GArrayLength Rtl8192DEAGCTAB_5GArrayLength ++ #define Rtl8192D_AGCTAB_2GArrayLength Rtl8192DEAGCTAB_2GArrayLength ++ #define Rtl8192D_AGCTAB_2TArrayLength Rtl8192DEAGCTAB_2TArrayLength ++ #define Rtl8192D_AGCTAB_1TArrayLength Rtl8192DEAGCTAB_1TArrayLength ++ #define Rtl8192D_AGCTAB_ArrayLength Rtl8192DEAGCTAB_ArrayLength ++ #define Rtl8192D_PHY_REG_2TArrayLength Rtl8192DEPHY_REG_2TArrayLength ++ #define Rtl8192D_PHY_REG_1TArrayLength Rtl8192DEPHY_REG_1TArrayLength ++ #define Rtl8192D_PHY_REG_Array_PGLength Rtl8192DEPHY_REG_Array_PGLength ++ #define Rtl8192D_PHY_REG_Array_MPLength Rtl8192DEPHY_REG_Array_MPLength ++ #define Rtl8192D_RadioA_2TArrayLength Rtl8192DERadioA_2TArrayLength ++ #define Rtl8192D_RadioB_2TArrayLength Rtl8192DERadioB_2TArrayLength ++ #define Rtl8192D_RadioA_2T_intPAArrayLength Rtl8192DERadioA_2T_intPAArrayLength ++ #define Rtl8192D_RadioB_2T_intPAArrayLength Rtl8192DERadioB_2T_intPAArrayLength ++ ++#elif defined(CONFIG_USB_HCI) ++ ++ #include "Hal8192DUHWImg.h" ++#ifdef CONFIG_WOWLAN ++ #include "Hal8192DUHWImg_wowlan.h" ++#endif //CONFIG_WOWLAN ++ #define RTL819X_DEFAULT_RF_TYPE RF_1T2R ++ ++//--------------------------------------------------------------------- ++// RTL8192DU From file ++//--------------------------------------------------------------------- ++ #define RTL8192D_FW_IMG "rtl8192DU\\rtl8192dfw.bin" ++ ++ #define RTL8192D_PHY_REG "rtl8192DU\\PHY_REG.txt" ++ #define RTL8192D_PHY_REG_PG "rtl8192DU\\PHY_REG_PG.txt" ++ #define RTL8192D_PHY_REG_MP "rtl8192DU\\PHY_REG_MP.txt" ++ ++ #define RTL8192D_AGC_TAB "rtl8192DU\\AGC_TAB.txt" ++ #define RTL8192D_AGC_TAB_2G "rtl8192DU\\AGC_TAB_2G.txt" ++ #define RTL8192D_AGC_TAB_5G "rtl8192DU\\AGC_TAB_5G.txt" ++ #define RTL8192D_PHY_RADIO_A "rtl8192DU\\radio_a.txt" ++ #define RTL8192D_PHY_RADIO_B "rtl8192DU\\radio_b.txt" ++ #define RTL8192D_PHY_RADIO_A_intPA "rtl8192DU\\radio_a_intPA.txt" ++ #define RTL8192D_PHY_RADIO_B_intPA "rtl8192DU\\radio_b_intPA.txt" ++ #define RTL8192D_PHY_MACREG "rtl8192DU\\MAC_REG.txt" ++ ++//--------------------------------------------------------------------- ++// RTL8192DU From header ++//--------------------------------------------------------------------- ++ ++ // Fw Array ++ #define Rtl8192D_FwImageArray Rtl8192DUFwImgArray ++#ifdef CONFIG_WOWLAN ++ #define Rtl8192D_FwWWImageArray Rtl8192DUFwWWImgArray ++#endif //CONFIG_WOWLAN ++ // MAC/BB/PHY Array ++ #define Rtl8192D_MAC_Array Rtl8192DUMAC_2T_Array ++ #define Rtl8192D_AGCTAB_Array Rtl8192DUAGCTAB_Array ++ #define Rtl8192D_AGCTAB_5GArray Rtl8192DUAGCTAB_5GArray ++ #define Rtl8192D_AGCTAB_2GArray Rtl8192DUAGCTAB_2GArray ++ #define Rtl8192D_AGCTAB_2TArray Rtl8192DUAGCTAB_2TArray ++ #define Rtl8192D_AGCTAB_1TArray Rtl8192DUAGCTAB_1TArray ++ #define Rtl8192D_PHY_REG_2TArray Rtl8192DUPHY_REG_2TArray ++ #define Rtl8192D_PHY_REG_1TArray Rtl8192DUPHY_REG_1TArray ++ #define Rtl8192D_PHY_REG_Array_PG Rtl8192DUPHY_REG_Array_PG ++ #define Rtl8192D_PHY_REG_Array_MP Rtl8192DUPHY_REG_Array_MP ++ #define Rtl8192D_RadioA_2TArray Rtl8192DURadioA_2TArray ++ #define Rtl8192D_RadioA_1TArray Rtl8192DURadioA_1TArray ++ #define Rtl8192D_RadioB_2TArray Rtl8192DURadioB_2TArray ++ #define Rtl8192D_RadioB_1TArray Rtl8192DURadioB_1TArray ++ #define Rtl8192D_RadioA_2T_intPAArray Rtl8192DURadioA_2T_intPAArray ++ #define Rtl8192D_RadioB_2T_intPAArray Rtl8192DURadioB_2T_intPAArray ++ ++ // Array length ++ #define Rtl8192D_FwImageArrayLength Rtl8192DUImgArrayLength ++ #define Rtl8192D_MAC_ArrayLength Rtl8192DUMAC_2T_ArrayLength ++ #define Rtl8192D_AGCTAB_5GArrayLength Rtl8192DUAGCTAB_5GArrayLength ++ #define Rtl8192D_AGCTAB_2GArrayLength Rtl8192DUAGCTAB_2GArrayLength ++ #define Rtl8192D_AGCTAB_2TArrayLength Rtl8192DUAGCTAB_2TArrayLength ++ #define Rtl8192D_AGCTAB_1TArrayLength Rtl8192DUAGCTAB_1TArrayLength ++ #define Rtl8192D_AGCTAB_ArrayLength Rtl8192DUAGCTAB_ArrayLength ++ #define Rtl8192D_PHY_REG_2TArrayLength Rtl8192DUPHY_REG_2TArrayLength ++ #define Rtl8192D_PHY_REG_1TArrayLength Rtl8192DUPHY_REG_1TArrayLength ++ #define Rtl8192D_PHY_REG_Array_PGLength Rtl8192DUPHY_REG_Array_PGLength ++ #define Rtl8192D_PHY_REG_Array_MPLength Rtl8192DUPHY_REG_Array_MPLength ++ #define Rtl8192D_RadioA_2TArrayLength Rtl8192DURadioA_2TArrayLength ++ #define Rtl8192D_RadioB_2TArrayLength Rtl8192DURadioB_2TArrayLength ++ #define Rtl8192D_RadioA_2T_intPAArrayLength Rtl8192DURadioA_2T_intPAArrayLength ++ #define Rtl8192D_RadioB_2T_intPAArrayLength Rtl8192DURadioB_2T_intPAArrayLength ++ ++ // The file name "_2T" is for 92CU, "_1T" is for 88CU. Modified by tynli. 2009.11.24. ++/* #define Rtl819XFwImageArray Rtl8192DUFwImgArray ++ #define Rtl819XMAC_Array Rtl8192DUMAC_2TArray ++ #define Rtl819XAGCTAB_Array Rtl8192DUAGCTAB_Array ++ #define Rtl819XAGCTAB_5GArray Rtl8192DUAGCTAB_5GArray ++ #define Rtl819XAGCTAB_2GArray Rtl8192DUAGCTAB_2GArray ++ #define Rtl819XPHY_REG_2TArray Rtl8192DUPHY_REG_2TArray ++ #define Rtl819XPHY_REG_1TArray Rtl8192DUPHY_REG_1TArray ++ #define Rtl819XRadioA_2TArray Rtl8192DURadioA_2TArray ++ #define Rtl819XRadioA_1TArray Rtl8192DURadioA_1TArray ++ #define Rtl819XRadioA_2T_intPAArray Rtl8192DURadioA_2T_intPAArray ++ #define Rtl819XRadioB_2TArray Rtl8192DURadioB_2TArray ++ #define Rtl819XRadioB_1TArray Rtl8192DURadioB_1TArray ++ #define Rtl819XRadioB_2T_intPAArray Rtl8192DURadioB_2T_intPAArray ++ #define Rtl819XPHY_REG_Array_PG Rtl8192DUPHY_REG_Array_PG ++ #define Rtl819XPHY_REG_Array_MP Rtl8192DUPHY_REG_Array_MP ++ ++ #define Rtl819XAGCTAB_2TArray Rtl8192DUAGCTAB_2TArray ++ #define Rtl819XAGCTAB_1TArray Rtl8192DUAGCTAB_1TArray*/ ++ ++#endif ++ ++#define DRVINFO_SZ 4 // unit is 8bytes ++#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0)) ++ ++// ++// Check if FW header exists. We do not consider the lower 4 bits in this case. ++// By tynli. 2009.12.04. ++// ++#define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D0 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D1 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D2 ||\ ++ (le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D3 ) ++ ++#define FW_8192D_SIZE 0x8020 // Max FW len = 32k + 32(FW header length). ++#define FW_8192D_START_ADDRESS 0x1000 ++#define FW_8192D_END_ADDRESS 0x1FFF ++ ++#define MAX_PAGE_SIZE 4096 // @ page : 4k bytes ++ ++typedef enum _FIRMWARE_SOURCE{ ++ FW_SOURCE_IMG_FILE = 0, ++ FW_SOURCE_HEADER_FILE = 1, //from header file ++}FIRMWARE_SOURCE, *PFIRMWARE_SOURCE; ++ ++typedef struct _RT_FIRMWARE{ ++ FIRMWARE_SOURCE eFWSource; ++ u8* szFwBuffer; ++ u32 ulFwLength; ++#ifdef CONFIG_WOWLAN ++ u8* szWoWLANFwBuffer; ++ u32 ulWoWLANFwLength; ++#endif //CONFIG_WOWLAN ++}RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_92D, *PRT_FIRMWARE_92D; ++ ++// ++// This structure must be cared byte-ordering ++// ++// Added by tynli. 2009.12.04. ++typedef struct _RT_8192D_FIRMWARE_HDR {//8-byte alinment required ++ ++ //--- LONG WORD 0 ---- ++ u16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut ++ u8 Category; // AP/NIC and USB/PCI ++ u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions ++ u16 Version; // FW Version ++ u8 Subversion; // FW Subversion, default 0x00 ++ u8 Rsvd1; ++ ++ ++ //--- LONG WORD 1 ---- ++ u8 Month; // Release time Month field ++ u8 Date; // Release time Date field ++ u8 Hour; // Release time Hour field ++ u8 Minute; // Release time Minute field ++ u16 RamCodeSize; // The size of RAM code ++ u16 Rsvd2; ++ ++ //--- LONG WORD 2 ---- ++ u32 SvnIdx; // The SVN entry index ++ u32 Rsvd3; ++ ++ //--- LONG WORD 3 ---- ++ u32 Rsvd4; ++ u32 Rsvd5; ++ ++}RT_8192D_FIRMWARE_HDR, *PRT_8192D_FIRMWARE_HDR; ++ ++#define DRIVER_EARLY_INT_TIME 0x05 ++#define BCN_DMA_ATIME_INT_TIME 0x02 ++ ++typedef enum _BT_CoType{ ++ BT_2Wire = 0, ++ BT_ISSC_3Wire = 1, ++ BT_Accel = 2, ++ BT_CSR = 3, ++ BT_CSR_ENHAN = 4, ++ BT_RTL8756 = 5, ++} BT_CoType, *PBT_CoType; ++ ++typedef enum _BT_CurState{ ++ BT_OFF = 0, ++ BT_ON = 1, ++} BT_CurState, *PBT_CurState; ++ ++typedef enum _BT_ServiceType{ ++ BT_SCO = 0, ++ BT_A2DP = 1, ++ BT_HID = 2, ++ BT_HID_Idle = 3, ++ BT_Scan = 4, ++ BT_Idle = 5, ++ BT_OtherAction = 6, ++ BT_Busy = 7, ++ BT_OtherBusy = 8, ++} BT_ServiceType, *PBT_ServiceType; ++ ++typedef enum _BT_RadioShared{ ++ BT_Radio_Shared = 0, ++ BT_Radio_Individual = 1, ++} BT_RadioShared, *PBT_RadioShared; ++ ++typedef struct _BT_COEXIST_STR{ ++ u8 BluetoothCoexist; ++ u8 BT_Ant_Num; ++ u8 BT_CoexistType; ++ u8 BT_State; ++ u8 BT_CUR_State; //0:on, 1:off ++ u8 BT_Ant_isolation; //0:good, 1:bad ++ u8 BT_PapeCtrl; //0:SW, 1:SW/HW dynamic ++ u8 BT_Service; ++ u8 BT_RadioSharedType; ++ u8 Ratio_Tx; ++ u8 Ratio_PRI; ++}BT_COEXIST_STR, *PBT_COEXIST_STR; ++ ++//Added for 92D IQK setting. ++typedef struct _IQK_MATRIX_REGS_SETTING{ ++ BOOLEAN bIQKDone; ++#if 1 ++ int Value[1][IQK_Matrix_REG_NUM]; ++#else ++ u32 Mark[IQK_Matrix_REG_NUM]; ++ u32 Value[IQK_Matrix_REG_NUM]; ++#endif ++}IQK_MATRIX_REGS_SETTING,*PIQK_MATRIX_REGS_SETTING; ++ ++#ifdef CONFIG_USB_RX_AGGREGATION ++ ++typedef enum _USB_RX_AGG_MODE{ ++ USB_RX_AGG_DISABLE, ++ USB_RX_AGG_DMA, ++ USB_RX_AGG_USB, ++ USB_RX_AGG_DMA_USB ++}USB_RX_AGG_MODE; ++ ++#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer ++ ++#endif ++ ++ ++#define TX_SELE_HQ BIT(0) // High Queue ++#define TX_SELE_LQ BIT(1) // Low Queue ++#define TX_SELE_NQ BIT(2) // Normal Queue ++ ++ ++// Note: We will divide number of page equally for each queue other than public queue! ++ ++#define TX_TOTAL_PAGE_NUMBER 0xF8 ++#define TX_PAGE_BOUNDARY (TX_TOTAL_PAGE_NUMBER + 1) ++ ++// For Normal Chip Setting ++// (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER ++#define NORMAL_PAGE_NUM_PUBQ 0x56 ++ ++ ++// For Test Chip Setting ++// (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER ++#define TEST_PAGE_NUM_PUBQ_92DU 0x89 ++#define TX_TOTAL_PAGE_NUMBER_92D_DUAL_MAC 0x7A ++#define NORMAL_PAGE_NUM_PUBQ_92D_DUAL_MAC 0x5A ++#define NORMAL_PAGE_NUM_HPQ_92D_DUAL_MAC 0x10 ++#define NORMAL_PAGE_NUM_LPQ_92D_DUAL_MAC 0x10 ++#define NORMAL_PAGE_NUM_NORMALQ_92D_DUAL_MAC 0 ++ ++#define TX_PAGE_BOUNDARY_DUAL_MAC (TX_TOTAL_PAGE_NUMBER_92D_DUAL_MAC + 1) ++ ++// For Test Chip Setting ++#define WMM_TEST_TX_TOTAL_PAGE_NUMBER 0xF5 ++#define WMM_TEST_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6 ++ ++#define WMM_TEST_PAGE_NUM_PUBQ 0xA3 ++#define WMM_TEST_PAGE_NUM_HPQ 0x29 ++#define WMM_TEST_PAGE_NUM_LPQ 0x29 ++ ++ ++//Note: For Normal Chip Setting ,modify later ++#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER 0xF5 ++#define WMM_NORMAL_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6 ++ ++#define WMM_NORMAL_PAGE_NUM_PUBQ_92D 0X65//0x82 ++#define WMM_NORMAL_PAGE_NUM_HPQ_92D 0X30//0x29 ++#define WMM_NORMAL_PAGE_NUM_LPQ_92D 0X30 ++#define WMM_NORMAL_PAGE_NUM_NPQ_92D 0X30 ++ ++#define WMM_NORMAL_PAGE_NUM_PUBQ_92D_DUAL_MAC 0X32 ++#define WMM_NORMAL_PAGE_NUM_HPQ_92D_DUAL_MAC 0X18 ++#define WMM_NORMAL_PAGE_NUM_LPQ_92D_DUAL_MAC 0X18 ++#define WMM_NORMAL_PAGE_NUM_NPQ_92D_DUAL_MAC 0X18 ++ ++//------------------------------------------------------------------------- ++// Chip specific ++//------------------------------------------------------------------------- ++ ++#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3) ++#define CHIP_BONDING_92C_1T2R 0x1 ++#define CHIP_BONDING_88C_USB_MCARD 0x2 ++#define CHIP_BONDING_88C_USB_HP 0x1 ++ ++// ++// 2011.01.06. Define new structure of chip version for RTL8723 and so on. Added by tynli. ++// ++/* ++ | BIT15:12 | BIT11:8 | BIT 7 | BIT6:4 | BIT3 | BIT2:0 | ++ |-------------+-----------+-----------+-------+-----------+-------| ++ | IC version(CUT) | ROM version | Manufacturer | RF type | Chip type | IC Type | ++ | | | TSMC/UMC | | TEST/NORMAL| | ++*/ ++// [15:12] IC version(CUT): A-cut=0, B-cut=1, C-cut=2, D-cut=3 ++// [7] Manufacturer: TSMC=0, UMC=1 ++// [6:4] RF type: 1T1R=0, 1T2R=1, 2T2R=2 ++// [3] Chip type: TEST=0, NORMAL=1 ++// [2:0] IC type: 81xxC=0, 8723=1, 92D=2 ++ ++#define CHIP_8723 BIT(0) ++#define CHIP_92D BIT(1) ++#define NORMAL_CHIP BIT(3) ++#define RF_TYPE_1T1R (~(BIT(4)|BIT(5)|BIT(6))) ++#define RF_TYPE_1T2R BIT(4) ++#define RF_TYPE_2T2R BIT(5) ++#define CHIP_VENDOR_UMC BIT(7) ++#define B_CUT_VERSION BIT(12) ++#define C_CUT_VERSION BIT(13) ++#define D_CUT_VERSION ((BIT(12)|BIT(13))) ++#define E_CUT_VERSION BIT(14) ++ ++ ++// MASK ++#define IC_TYPE_MASK (BIT(0)|BIT(1)|BIT(2)) ++#define CHIP_TYPE_MASK BIT(3) ++#define RF_TYPE_MASK (BIT(4)|BIT(5)|BIT(6)) ++#define MANUFACTUER_MASK BIT(7) ++#define ROM_VERSION_MASK (BIT(11)|BIT(10)|BIT(9)|BIT(8)) ++#define CUT_VERSION_MASK (BIT(15)|BIT(14)|BIT(13)|BIT(12)) ++ ++// Get element ++#define GET_CVID_IC_TYPE(version) ((version) & IC_TYPE_MASK) ++#define GET_CVID_CHIP_TYPE(version) ((version) & CHIP_TYPE_MASK) ++#define GET_CVID_RF_TYPE(version) ((version) & RF_TYPE_MASK) ++#define GET_CVID_MANUFACTUER(version) ((version) & MANUFACTUER_MASK) ++#define GET_CVID_ROM_VERSION(version) ((version) & ROM_VERSION_MASK) ++#define GET_CVID_CUT_VERSION(version) ((version) & CUT_VERSION_MASK) ++ ++#define IS_81XXC(version) ((GET_CVID_IC_TYPE(version) == 0)? _TRUE : _FALSE) ++#define IS_8723_SERIES(version) ((GET_CVID_IC_TYPE(version) == CHIP_8723)? _TRUE : _FALSE) ++#define IS_92D(version) ((GET_CVID_IC_TYPE(version) == CHIP_92D)? _TRUE : _FALSE) ++#define IS_1T1R(version) ((GET_CVID_RF_TYPE(version))? _FALSE : _TRUE) ++#define IS_1T2R(version) ((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R)? _TRUE : _FALSE) ++#define IS_2T2R(version) ((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R)? _TRUE : _FALSE) ++#define IS_CHIP_VENDOR_UMC(version) ((GET_CVID_MANUFACTUER(version))? _TRUE: _FALSE) ++ ++#define IS_92C_SERIAL(version) ((IS_81XXC(version) && IS_2T2R(version)) ? _TRUE : _FALSE) ++#define IS_VENDOR_UMC_A_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE) ++#define IS_VENDOR_8723_A_CUT(version) ((IS_8723_SERIES(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE) ++// 88/92C UMC B-cut vendor is set to TSMC so we need to check CHIP_VENDOR_UMC bit is not 1. ++#define IS_81xxC_VENDOR_UMC_B_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? _TRUE : _FALSE):_FALSE) ++#define IS_92D_SINGLEPHY(version) ((IS_92D(version)) ? (IS_2T2R(version) ? _TRUE: _FALSE) : _FALSE) ++ ++#define IS_92D_C_CUT(version) ((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE) ++#define IS_92D_D_CUT(version) ((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE) ++#define IS_92D_E_CUT(version) ((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE) ++#define IS_NORMAL_CHIP92D(version) ((GET_CVID_CHIP_TYPE(version))? _TRUE: _FALSE) ++ ++typedef enum _VERSION_8192D{ ++ VERSION_TEST_CHIP_88C = 0x0000, ++ VERSION_TEST_CHIP_92C = 0x0020, ++ VERSION_TEST_UMC_CHIP_8723 = 0x0081, ++ VERSION_NORMAL_TSMC_CHIP_88C = 0x0008, ++ VERSION_NORMAL_TSMC_CHIP_92C = 0x0028, ++ VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x0018, ++ VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x0088, ++ VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x00a8, ++ VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x0098, ++ VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089, ++ VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089, ++ VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x1088, ++ VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x10a8, ++ VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x1090, ++ VERSION_TEST_CHIP_92D_SINGLEPHY= 0x0022, ++ VERSION_TEST_CHIP_92D_DUALPHY = 0x0002, ++ VERSION_NORMAL_CHIP_92D_SINGLEPHY= 0x002a, ++ VERSION_NORMAL_CHIP_92D_DUALPHY = 0x000a, ++ VERSION_NORMAL_CHIP_92D_C_CUT_SINGLEPHY = 0x202a, ++ VERSION_NORMAL_CHIP_92D_C_CUT_DUALPHY = 0x200a, ++ VERSION_NORMAL_CHIP_92D_D_CUT_SINGLEPHY = 0x302a, ++ VERSION_NORMAL_CHIP_92D_D_CUT_DUALPHY = 0x300a, ++ VERSION_NORMAL_CHIP_92D_E_CUT_SINGLEPHY = 0x402a, ++ VERSION_NORMAL_CHIP_92D_E_CUT_DUALPHY = 0x400a, ++}VERSION_8192D,*PVERSION_8192D; ++ ++ ++//------------------------------------------------------------------------- ++// Channel Plan ++//------------------------------------------------------------------------- ++enum ChannelPlan{ ++ CHPL_FCC = 0, ++ CHPL_IC = 1, ++ CHPL_ETSI = 2, ++ CHPL_SPAIN = 3, ++ CHPL_FRANCE = 4, ++ CHPL_MKK = 5, ++ CHPL_MKK1 = 6, ++ CHPL_ISRAEL = 7, ++ CHPL_TELEC = 8, ++ CHPL_GLOBAL = 9, ++ CHPL_WORLD = 10, ++}; ++ ++typedef struct _TxPowerInfo{ ++ u8 CCKIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40_1SIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40_2SIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ s8 HT20IndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 OFDMIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT40MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 HT20MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX]; ++ u8 TSSI_A[3]; ++ u8 TSSI_B[3]; ++ u8 TSSI_A_5G[3]; //5GL/5GM/5GH ++ u8 TSSI_B_5G[3]; ++}TxPowerInfo, *PTxPowerInfo; ++ ++#define EFUSE_REAL_CONTENT_LEN 1024 ++#define EFUSE_MAP_LEN 256 ++#define EFUSE_MAX_SECTION 32 ++#define EFUSE_MAX_SECTION_BASE 16 ++// To prevent out of boundary programming case, leave 1byte and program full section ++// 9bytes + 1byt + 5bytes and pre 1byte. ++// For worst case: ++// | 2byte|----8bytes----|1byte|--7bytes--| //92D ++#define EFUSE_OOB_PROTECT_BYTES 18 // PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. ++ ++typedef enum _PA_MODE { ++ PA_MODE_EXTERNAL = 0x00, ++ PA_MODE_INTERNAL_SP3T = 0x01, ++ PA_MODE_INTERNAL_SPDT = 0x02 ++} PA_MODE; ++ ++/* Copy from rtl8192c */ ++enum c2h_id_8192d { ++ C2H_DBG = 0, ++ C2H_TSF = 1, ++ C2H_AP_RPT_RSP = 2, ++ C2H_CCX_TX_RPT = 3, ++ C2H_BT_RSSI = 4, ++ C2H_BT_OP_MODE = 5, ++ C2H_EXT_RA_RPT = 6, ++ C2H_HW_INFO_EXCH = 10, ++ C2H_C2H_H2C_TEST = 11, ++ C2H_BT_INFO = 12, ++ C2H_BT_MP_INFO = 15, ++ MAX_C2HEVENT ++}; ++ ++#ifdef CONFIG_PCI_HCI ++struct hal_data_8192de ++{ ++ VERSION_8192D VersionID; ++ ++ // add for 92D Phy mode/mac/Band mode ++ MACPHY_MODE_8192D MacPhyMode92D; ++ BAND_TYPE CurrentBandType92D; //0:2.4G, 1:5G ++ BAND_TYPE BandSet92D; ++ BOOLEAN bIsVS; ++ BOOLEAN bSupportRemoteWakeUp; ++ u8 AutoLoadStatusFor8192D; ++ ++ BOOLEAN bNOPG; ++ ++ BOOLEAN bMasterOfDMSP; ++ BOOLEAN bSlaveOfDMSP; ++ ++ u16 CustomerID; ++ ++ u16 FirmwareVersion; ++ u16 FirmwareVersionRev; ++ u16 FirmwareSubVersion; ++ ++ u32 IntrMask[2]; ++ u32 IntrMaskToSet[2]; ++ ++ u32 DisabledFunctions; ++ ++ //current WIFI_PHY values ++ u32 ReceiveConfig; ++ u32 TransmitConfig; ++ WIRELESS_MODE CurrentWirelessMode; ++ HT_CHANNEL_WIDTH CurrentChannelBW; ++ u8 CurrentChannel; ++ u8 nCur40MhzPrimeSC;// Control channel sub-carrier ++ u16 BasicRateSet; ++ ++ //rf_ctrl ++ u8 rf_chip; ++ u8 rf_type; ++ u8 NumTotalRFPath; ++ ++ // ++ // EEPROM setting. ++ // ++ u16 EEPROMVID; ++ u16 EEPROMDID; ++ u16 EEPROMSVID; ++ u16 EEPROMSMID; ++ u16 EEPROMChannelPlan; ++ u16 EEPROMVersion; ++ ++ u8 EEPROMCustomerID; ++ u8 EEPROMBoardType; ++ u8 EEPROMRegulatory; ++ ++ u8 EEPROMThermalMeter; ++ ++ u8 EEPROMC9; ++ u8 EEPROMCC; ++ u8 PAMode; ++ ++ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER_2G]; ++ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ s8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff ++ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff ++ // For power group ++ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ ++ u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff ++ ++ u8 CrystalCap; // CrystalCap. ++ ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv bt_coexist; ++#endif ++ ++ // Read/write are allow for following hardware information variables ++ u8 framesync; ++ u32 framesyncC34; ++ u8 framesyncMonitor; ++ u8 DefaultInitialGain[4]; ++ u8 pwrGroupCnt; ++ u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; ++ u32 CCKTxPowerLevelOriginalOffset; ++ ++ u32 AntennaTxPath; // Antenna path Tx ++ u32 AntennaRxPath; // Antenna path Rx ++ u8 BluetoothCoexist; ++ u8 ExternalPA; ++ u8 InternalPA5G[2]; //pathA / pathB ++ ++ //u32 LedControlNum; ++ //u32 LedControlMode; ++ //u32 TxPowerTrackControl; ++ u8 b1x1RecvCombine; // for 1T1R receive combining ++ ++ u8 bCurrentTurboEDCA; ++ u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo. ++ ++ //vivi, for tx power tracking, 20080407 ++ //u16 TSSI_13dBm; ++ //u32 Pwr_Track; ++ // The current Tx Power Level ++ u8 CurrentCckTxPwrIdx; ++ u8 CurrentOfdm24GTxPwrIdx; ++ ++ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D ++ ++ BOOLEAN bRFPathRxEnable[4]; // We support 4 RF path now. ++ ++ u32 RfRegChnlVal[2]; ++ ++ u8 bCckHighPower; ++ ++ BOOLEAN bPhyValueInitReady; ++ ++ BOOLEAN bTXPowerDataReadFromEEPORM; ++ ++ BOOLEAN bInSetPower; ++ ++ //RDG enable ++ BOOLEAN bRDGEnable; ++ ++ BOOLEAN bLoadIMRandIQKSettingFor2G;// True if IMR or IQK have done for 2.4G in scan progress ++ BOOLEAN bNeedIQK; ++ ++ BOOLEAN bLCKInProgress; ++ ++ BOOLEAN bEarlyModeEnable; ++ ++#if 1 ++ IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM]; ++#else ++ //regc80¡¢regc94¡¢regc4c¡¢regc88¡¢regc9c¡¢regc14¡¢regca0¡¢regc1c¡¢regc78 ++ u4Byte IQKMatrixReg[IQK_Matrix_REG_NUM]; ++ IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM]; // 1->2G,24->5G 20M channel,21->5G 40M channel. ++#endif ++ ++ //for host message to fw ++ u8 LastHMEBoxNum; ++ ++ u8 fw_ractrl; ++ // Beacon function related global variable. ++ u32 RegBcnCtrlVal; ++ u8 RegTxPause; ++ u8 RegFwHwTxQCtrl; ++ u8 RegReg542; ++ u8 RegCR_1; ++ ++ struct dm_priv dmpriv; ++ ++ u8 bInterruptMigration; ++ ++ u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. ++ ++ // Add for dual MAC 0--Mac0 1--Mac1 ++ u32 interfaceIndex; ++ ++ u16 RegRRSR; ++ ++ u16 EfuseUsedBytes; ++ u8 RTSInitRate; // 2010.11.24.by tynli. ++#ifdef CONFIG_P2P ++ struct P2P_PS_Offload_t p2p_ps_offload; ++#endif //CONFIG_P2P ++}; ++ ++typedef struct hal_data_8192de HAL_DATA_TYPE, *PHAL_DATA_TYPE; ++ ++// ++// Function disabled. ++// ++#define DF_TX_BIT BIT0 ++#define DF_RX_BIT BIT1 ++#define DF_IO_BIT BIT2 ++#define DF_IO_D3_BIT BIT3 ++ ++#define RT_DF_TYPE u32 ++#define RT_DISABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions |= ((RT_DF_TYPE)(__FuncBits))) ++#define RT_ENABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions &= (~((RT_DF_TYPE)(__FuncBits)))) ++#define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) ++ ++void InterruptRecognized8192DE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent); ++VOID UpdateInterruptMask8192DE(PADAPTER Adapter, u32 AddMSR, u32 RemoveMSR); ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ ++//should be renamed and moved to another file ++typedef enum _INTERFACE_SELECT_8192DUSB{ ++ INTF_SEL0_USB = 0, // USB ++ INTF_SEL1_MINICARD = 1, // Minicard ++ INTF_SEL2_EKB_PRO = 2, // Eee keyboard proprietary ++ INTF_SEL3_PRO = 3, // Customized proprietary ++} INTERFACE_SELECT_8192DUSB, *PINTERFACE_SELECT_8192DUSB; ++ ++typedef INTERFACE_SELECT_8192DUSB INTERFACE_SELECT_USB; ++ ++struct hal_data_8192du ++{ ++ VERSION_8192D VersionID; ++ ++ // add for 92D Phy mode/mac/Band mode ++ MACPHY_MODE_8192D MacPhyMode92D; ++ BAND_TYPE CurrentBandType92D; //0:2.4G, 1:5G ++ BAND_TYPE BandSet92D; ++ BOOLEAN bIsVS; ++ ++ BOOLEAN bNOPG; ++ ++ BOOLEAN bSupportRemoteWakeUp; ++ BOOLEAN bMasterOfDMSP; ++ BOOLEAN bSlaveOfDMSP; ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ BOOLEAN bInModeSwitchProcess; ++#endif ++ ++ u16 CustomerID; ++ ++ u16 FirmwareVersion; ++ u16 FirmwareVersionRev; ++ u16 FirmwareSubVersion; ++ ++ //current WIFI_PHY values ++ u32 ReceiveConfig; ++ WIRELESS_MODE CurrentWirelessMode; ++ HT_CHANNEL_WIDTH CurrentChannelBW; ++ u8 CurrentChannel; ++ u8 nCur40MhzPrimeSC;// Control channel sub-carrier ++ u16 BasicRateSet; ++ ++ INTERFACE_SELECT_8192DUSB InterfaceSel; ++ ++ //rf_ctrl ++ u8 rf_chip; ++ u8 rf_type; ++ u8 NumTotalRFPath; ++ ++ // ++ // EEPROM setting. ++ // ++ u8 EEPROMVersion; ++ u16 EEPROMVID; ++ u16 EEPROMPID; ++ u16 EEPROMSVID; ++ u16 EEPROMSDID; ++ u8 EEPROMCustomerID; ++ u8 EEPROMSubCustomerID; ++ u8 EEPROMRegulatory; ++ ++ u8 EEPROMThermalMeter; ++ ++ u8 EEPROMC9; ++ u8 EEPROMCC; ++ u8 PAMode; ++ ++ u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER_2G]; ++ u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr ++ s8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff ++ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff ++ // For power group ++ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; ++ ++ u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff ++ ++ u8 CrystalCap; // CrystalCap. ++ ++#ifdef CONFIG_BT_COEXIST ++ struct btcoexist_priv bt_coexist; ++#endif ++ ++ // Read/write are allow for following hardware information variables ++ u8 framesync; ++ u32 framesyncC34; ++ u8 framesyncMonitor; ++ u8 DefaultInitialGain[4]; ++ u8 pwrGroupCnt; ++ u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; ++ u32 CCKTxPowerLevelOriginalOffset; ++ ++ u32 AntennaTxPath; // Antenna path Tx ++ u32 AntennaRxPath; // Antenna path Rx ++ u8 BluetoothCoexist; ++ u8 ExternalPA; ++ u8 InternalPA5G[2]; //pathA / pathB ++ ++ //u32 LedControlNum; ++ //u32 LedControlMode; ++ //u32 TxPowerTrackControl; ++ u8 b1x1RecvCombine; // for 1T1R receive combining ++ ++ u8 bCurrentTurboEDCA; ++ u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo. ++ ++ //vivi, for tx power tracking, 20080407 ++ //u16 TSSI_13dBm; ++ //u32 Pwr_Track; ++ // The current Tx Power Level ++ u8 CurrentCckTxPwrIdx; ++ u8 CurrentOfdm24GTxPwrIdx; ++ ++ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D ++ ++ BOOLEAN bRFPathRxEnable[4]; // We support 4 RF path now. ++ ++ u32 RfRegChnlVal[2]; ++ ++ u8 bCckHighPower; ++ ++ BOOLEAN bPhyValueInitReady; ++ ++ BOOLEAN bTXPowerDataReadFromEEPORM; ++ ++ BOOLEAN bInSetPower; ++ ++ //RDG enable ++ BOOLEAN bRDGEnable; ++ ++ BOOLEAN bLoadIMRandIQKSettingFor2G;// True if IMR or IQK have done for 2.4G in scan progress ++ BOOLEAN bNeedIQK; ++ ++ BOOLEAN bLCKInProgress; ++ ++ BOOLEAN bEarlyModeEnable; ++ ++#if 1 ++ IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM]; ++#else ++ //regc80¡¢regc94¡¢regc4c¡¢regc88¡¢regc9c¡¢regc14¡¢regca0¡¢regc1c¡¢regc78 ++ u4Byte IQKMatrixReg[IQK_Matrix_REG_NUM]; ++ IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM]; // 1->2G,24->5G 20M channel,21->5G 40M channel. ++#endif ++ ++ //for host message to fw ++ u8 LastHMEBoxNum; ++ ++ u8 fw_ractrl; ++ // Beacon function related global variable. ++ u32 RegBcnCtrlVal; ++ u8 RegTxPause; ++ u8 RegFwHwTxQCtrl; ++ u8 RegReg542; ++ u8 RegCR_1; ++ ++ struct dm_priv dmpriv; ++ ++ u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. ++ ++ //Query RF by FW ++ BOOLEAN bReadRFbyFW; ++ ++ // For 92C USB endpoint setting ++ // ++ ++ u32 UsbBulkOutSize; ++ ++ int RtBulkOutPipe[3]; ++ int RtBulkInPipe; ++ int RtIntInPipe; ++ ++ // Add for dual MAC 0--Mac0 1--Mac1 ++ u32 interfaceIndex; ++ ++ u8 OutEpQueueSel; ++ u8 OutEpNumber; ++ ++ u8 Queue2EPNum[8];//for out endpoint number mapping ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++ u8 UsbTxAggMode; ++ u8 UsbTxAggDescNum; ++#endif ++#ifdef CONFIG_USB_RX_AGGREGATION ++ u16 HwRxPageSize; // Hardware setting ++ u32 MaxUsbRxAggBlock; ++ ++ USB_RX_AGG_MODE UsbRxAggMode; ++ u8 UsbRxAggBlockCount; // USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed ++ u8 UsbRxAggBlockTimeout; ++ u8 UsbRxAggPageCount; // 8192C DMA page count ++ u8 UsbRxAggPageTimeout; ++#endif ++ ++ u16 RegRRSR; ++ ++ u16 EfuseUsedBytes; ++ u8 RTSInitRate; // 2010.11.24.by tynli. ++#ifdef CONFIG_P2P ++ struct P2P_PS_Offload_t p2p_ps_offload; ++#endif //CONFIG_P2P ++}; ++ ++typedef struct hal_data_8192du HAL_DATA_TYPE, *PHAL_DATA_TYPE; ++#endif ++ ++#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData)) ++#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type) ++ ++int FirmwareDownload92D(IN PADAPTER Adapter,IN BOOLEAN bUsedWoWLANFw); ++VOID rtl8192d_FirmwareSelfReset(IN PADAPTER Adapter); ++void rtl8192d_ReadChipVersion(IN PADAPTER Adapter); ++VOID rtl8192d_EfuseParseChnlPlan(PADAPTER Adapter, u8 *hwinfo, BOOLEAN AutoLoadFail); ++VOID rtl8192d_ReadTxPowerInfo(PADAPTER Adapter, u8* PROMContent, BOOLEAN AutoLoadFail); ++VOID rtl8192d_ResetDualMacSwitchVariables(IN PADAPTER Adapter); ++u8 GetEEPROMSize8192D(PADAPTER Adapter); ++BOOLEAN PHY_CheckPowerOffFor8192D(PADAPTER Adapter); ++VOID PHY_SetPowerOnFor8192D(PADAPTER Adapter); ++//void PHY_ConfigMacPhyMode92D(PADAPTER Adapter); ++void rtl8192d_free_hal_data(_adapter * padapter); ++void rtl8192d_set_hal_ops(struct hal_ops *pHalFunc); ++ ++#endif ++ ++#ifdef CONFIG_MP_INCLUDED ++ ++ ++extern void Hal_SetAntenna(PADAPTER pAdapter); ++extern void Hal_SetBandwidth(PADAPTER pAdapter); ++ ++extern void Hal_SetTxPower(PADAPTER pAdapter); ++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart ); ++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetBandwidth(PADAPTER pAdapter); ++ ++extern void Hal_SetDataRate(PADAPTER pAdapter); ++extern void Hal_SetChannel(PADAPTER pAdapter); ++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter); ++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther); ++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable); ++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable); ++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value); ++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter); ++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14); ++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven); ++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter); ++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter); ++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart); ++ ++ ++#endif //end CONFIG_MP_INCLUDED +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_led.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_led.h +new file mode 100644 +index 000000000000..b1f7a946fb0b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_led.h +@@ -0,0 +1,42 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTL8192D_LED_H_ ++#define __RTL8192D_LED_H_ ++ ++#include ++#include ++#include ++ ++ ++//================================================================================ ++// Interface to manipulate LED objects. ++//================================================================================ ++#ifdef CONFIG_USB_HCI ++void rtl8192du_InitSwLeds(_adapter *padapter); ++void rtl8192du_DeInitSwLeds(_adapter *padapter); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++void rtl8192de_gen_RefreshLedState(PADAPTER Adapter); ++void rtl8192de_InitSwLeds(_adapter *padapter); ++void rtl8192de_DeInitSwLeds(_adapter *padapter); ++#endif ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_recv.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_recv.h +new file mode 100644 +index 000000000000..e03347a02bfe +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_recv.h +@@ -0,0 +1,186 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192D_RECV_H_ ++#define _RTL8192D_RECV_H_ ++ ++#include ++#include ++#include ++ ++ ++#ifdef PLATFORM_OS_XP ++ #ifdef CONFIG_SDIO_HCI ++ #define NR_RECVBUFF 1024//512//128 ++ #else ++ #define NR_RECVBUFF (16) ++ #endif ++#elif defined(PLATFORM_OS_CE) ++ #ifdef CONFIG_SDIO_HCI ++ #define NR_RECVBUFF (128) ++ #else ++ #define NR_RECVBUFF (4) ++ #endif ++#else ++#ifdef CONFIG_SINGLE_RECV_BUF ++ #define NR_RECVBUFF (1) ++#else ++ #define NR_RECVBUFF (4) ++#endif //CONFIG_SINGLE_RECV_BUF ++ #define NR_PREALLOC_RECV_SKB (8) ++#endif ++ ++ ++ ++#define RECV_BLK_SZ 512 ++#define RECV_BLK_CNT 16 ++#define RECV_BLK_TH RECV_BLK_CNT ++ ++#if defined(CONFIG_USB_HCI) ++ ++#ifdef PLATFORM_OS_CE ++#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k ++#else ++ #ifndef CONFIG_MINIMAL_MEMORY_USAGE ++ //#define MAX_RECVBUF_SZ (32768) // 32k ++ //#define MAX_RECVBUF_SZ (16384) //16K ++ //#define MAX_RECVBUF_SZ (10240) //10K ++ #ifdef CONFIG_PLATFORM_MSTAR ++ #define MAX_RECVBUF_SZ (8192) // 8K ++ #else ++ #define MAX_RECVBUF_SZ (15360) // 15k < 16k ++ #endif ++ #else ++ #define MAX_RECVBUF_SZ (4000) // about 4K ++ #endif ++#endif ++ ++#elif defined(CONFIG_PCI_HCI) ++//#ifndef CONFIG_MINIMAL_MEMORY_USAGE ++// #define MAX_RECVBUF_SZ (9100) ++//#else ++ #define MAX_RECVBUF_SZ (4000) // about 4K ++//#endif ++ ++#define RX_MPDU_QUEUE 0 ++#define RX_CMD_QUEUE 1 ++#define RX_MAX_QUEUE 2 ++#endif ++ ++#define RECV_BULK_IN_ADDR 0x80 ++#define RECV_INT_IN_ADDR 0x81 ++ ++#define PHY_RSSI_SLID_WIN_MAX 100 ++#define PHY_LINKQUALITY_SLID_WIN_MAX 20 ++ ++struct phy_stat ++{ ++ unsigned int phydw0; ++ ++ unsigned int phydw1; ++ ++ unsigned int phydw2; ++ ++ unsigned int phydw3; ++ ++ unsigned int phydw4; ++ ++ unsigned int phydw5; ++ ++ unsigned int phydw6; ++ ++ unsigned int phydw7; ++}; ++ ++typedef struct _Phy_OFDM_Rx_Status_Report_8192cd ++{ ++ unsigned char trsw_gain_X[4]; ++ unsigned char pwdb_all; ++ unsigned char cfosho_X[4]; ++ unsigned char cfotail_X[4]; ++ unsigned char rxevm_X[2]; ++ unsigned char rxsnr_X[4]; ++ unsigned char pdsnr_X[2]; ++ unsigned char csi_current_X[2]; ++ unsigned char csi_target_X[2]; ++ unsigned char sigevm; ++ unsigned char max_ex_pwr; ++//#ifdef RTL8192SE ++#ifdef CONFIG_LITTLE_ENDIAN ++ unsigned char ex_intf_flg:1; ++ unsigned char sgi_en:1; ++ unsigned char rxsc:2; ++ //unsigned char rsvd:4; ++ unsigned char idle_long:1; ++ unsigned char r_ant_train_en:1; ++ unsigned char ANTSELB:1; ++ unsigned char ANTSEL:1; ++#else // _BIG_ENDIAN_ ++ //unsigned char rsvd:4; ++ unsigned char ANTSEL:1; ++ unsigned char ANTSELB:1; ++ unsigned char r_ant_train_en:1; ++ unsigned char idle_long:1; ++ unsigned char rxsc:2; ++ unsigned char sgi_en:1; ++ unsigned char ex_intf_flg:1; ++#endif ++//#else // RTL8190, RTL8192E ++// unsigned char sgi_en; ++// unsigned char rxsc_sgien_exflg; ++//#endif ++}__attribute__ ((packed)) PHY_STS_OFDM_8192CD_T,PHY_RX_DRIVER_INFO_8192CD; ++ ++typedef struct _Phy_CCK_Rx_Status_Report_8192cd ++{ ++ /* For CCK rate descriptor. This is a signed 8:1 variable. LSB bit presend ++ 0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */ ++ u8 adc_pwdb_X[4]; ++ u8 SQ_rpt; ++ u8 cck_agc_rpt; ++} PHY_STS_CCK_8192CD_T; ++ ++// Rx smooth factor ++#define Rx_Smooth_Factor (20) ++ ++#ifdef CONFIG_USB_HCI ++typedef struct _INTERRUPT_MSG_FORMAT_EX{ ++ unsigned int C2H_MSG0; ++ unsigned int C2H_MSG1; ++ unsigned int C2H_MSG2; ++ unsigned int C2H_MSG3; ++ unsigned int HISR; // from HISR Reg0x124, read to clear ++ unsigned int HISRE;// from HISRE Reg0x12c, read to clear ++ unsigned int MSG_EX; ++}INTERRUPT_MSG_FORMAT_EX,*PINTERRUPT_MSG_FORMAT_EX; ++ ++void rtl8192du_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf); ++int rtl8192du_init_recv_priv(_adapter * padapter); ++void rtl8192du_free_recv_priv(_adapter * padapter); ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++int rtl8192de_init_recv_priv(_adapter * padapter); ++void rtl8192de_free_recv_priv(_adapter * padapter); ++#endif ++ ++void rtl8192d_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info); ++void rtl8192d_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_rf.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_rf.h +new file mode 100644 +index 000000000000..1aba22938e6f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_rf.h +@@ -0,0 +1,96 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/****************************************************************************** ++ * ++ * ++ * Module: rtl8192d_rf.h ( Header File) ++ * ++ * Note: Collect every HAL RF type exter API or constant. ++ * ++ * Function: ++ * ++ * Export: ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * ++ * 09/25/2008 MHC Create initial version. ++ * ++ * ++******************************************************************************/ ++#ifndef _RTL8192D_RF_H_ ++#define _RTL8192D_RF_H_ ++/* Check to see if the file has been included already. */ ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++// ++// For RF 6052 Series ++// ++#define RF6052_MAX_TX_PWR 0x3F ++#define RF6052_MAX_REG 0x3F ++#define RF6052_MAX_PATH 2 ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++/*------------------------------Define structure----------------------------*/ ++ ++/*------------------------------Define structure----------------------------*/ ++ ++ ++/*------------------------Export global variable----------------------------*/ ++/*------------------------Export global variable----------------------------*/ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++/*------------------------Export Marco Definition---------------------------*/ ++ ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++// ++// RF RL6052 Series API ++// ++void rtl8192d_RF_ChangeTxPath( IN PADAPTER Adapter, ++ IN u16 DataRate); ++void rtl8192d_PHY_RF6052SetBandwidth( ++ IN PADAPTER Adapter, ++ IN HT_CHANNEL_WIDTH Bandwidth); ++VOID rtl8192d_PHY_RF6052SetCckTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerlevel); ++VOID rtl8192d_PHY_RF6052SetOFDMTxPower( ++ IN PADAPTER Adapter, ++ IN u8* pPowerLevel, ++ IN u8 Channel); ++int PHY_RF6052_Config8192D( IN PADAPTER Adapter ); ++ ++BOOLEAN rtl8192d_PHY_EnableAnotherPHY(IN PADAPTER Adapter, IN BOOLEAN bMac0); ++ ++void rtl8192d_PHY_PowerDownAnotherPHY(IN PADAPTER Adapter, IN BOOLEAN bMac0); ++ ++ ++/*--------------------------Exported Function prototype---------------------*/ ++ ++ ++#endif/* End of HalRf.h */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_spec.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_spec.h +new file mode 100644 +index 000000000000..d2d3e894fb20 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_spec.h +@@ -0,0 +1,1840 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef __RTL8192D_SPEC_H__ ++#define __RTL8192D_SPEC_H__ ++ ++#include ++ ++#ifndef BIT ++#define BIT(x) (1 << (x)) ++#endif ++ ++#define BIT0 0x00000001 ++#define BIT1 0x00000002 ++#define BIT2 0x00000004 ++#define BIT3 0x00000008 ++#define BIT4 0x00000010 ++#define BIT5 0x00000020 ++#define BIT6 0x00000040 ++#define BIT7 0x00000080 ++#define BIT8 0x00000100 ++#define BIT9 0x00000200 ++#define BIT10 0x00000400 ++#define BIT11 0x00000800 ++#define BIT12 0x00001000 ++#define BIT13 0x00002000 ++#define BIT14 0x00004000 ++#define BIT15 0x00008000 ++#define BIT16 0x00010000 ++#define BIT17 0x00020000 ++#define BIT18 0x00040000 ++#define BIT19 0x00080000 ++#define BIT20 0x00100000 ++#define BIT21 0x00200000 ++#define BIT22 0x00400000 ++#define BIT23 0x00800000 ++#define BIT24 0x01000000 ++#define BIT25 0x02000000 ++#define BIT26 0x04000000 ++#define BIT27 0x08000000 ++#define BIT28 0x10000000 ++#define BIT29 0x20000000 ++#define BIT30 0x40000000 ++#define BIT31 0x80000000 ++ ++ ++//============================================================ ++// 8192D Regsiter offset definition ++//============================================================ ++ ++ ++//============================================================ ++// ++//============================================================ ++ ++//----------------------------------------------------- ++// ++// 0x0000h ~ 0x00FFh System Configuration ++// ++//----------------------------------------------------- ++#define REG_SYS_ISO_CTRL 0x0000 ++#define REG_SYS_FUNC_EN 0x0002 ++#define REG_APS_FSMCO 0x0004 ++#define REG_SYS_CLKR 0x0008 ++#define REG_9346CR 0x000A ++#define REG_EE_VPD 0x000C ++#define REG_AFE_MISC 0x0010 ++#define REG_SPS0_CTRL 0x0011 ++#define REG_POWER_OFF_IN_PROCESS 0x0017 ++#define REG_SPS_OCP_CFG 0x0018 ++#define REG_RSV_CTRL 0x001C ++#define REG_RF_CTRL 0x001F ++#define REG_LDOA15_CTRL 0x0020 ++#define REG_LDOV12D_CTRL 0x0021 ++#define REG_LDOHCI12_CTRL 0x0022 ++#define REG_LPLDO_CTRL 0x0023 ++#define REG_AFE_XTAL_CTRL 0x0024 ++#define REG_AFE_PLL_CTRL 0x0028 ++#define REG_MAC_PHY_CTRL 0x002c //for 92d, DMDP,SMSP,DMSP contrl ++#define REG_EFUSE_CTRL 0x0030 ++#define REG_EFUSE_TEST 0x0034 ++#define REG_PWR_DATA 0x0038 ++#define REG_CAL_TIMER 0x003C ++#define REG_ACLK_MON 0x003E ++#define REG_GPIO_MUXCFG 0x0040 ++//#define REG_GPIO_MUXCFG 0x0041 ++#define REG_GPIO_IO_SEL 0x0042 ++#define REG_MAC_PINMUX_CFG 0x0043 ++#define REG_GPIO_PIN_CTRL 0x0044 ++#define REG_GPIO_INTM 0x0048 ++#define REG_LEDCFG0 0x004C ++#define REG_LEDCFG1 0x004D ++#define REG_LEDCFG2 0x004E ++#define REG_LEDCFG3 0x004F ++#define REG_FSIMR 0x0050 ++#define REG_FSISR 0x0054 ++ ++#define REG_MCUFWDL 0x0080 ++#ifdef CONFIG_WOWLAN ++#define REG_WOWLAN_REASON 0x00FC ++#endif // CONFIG_WOWLAN ++#define REG_HMEBOX_EXT_0 0x0088 ++#define REG_HMEBOX_EXT_1 0x008A ++#define REG_HMEBOX_EXT_2 0x008C ++#define REG_HMEBOX_EXT_3 0x008E ++ ++#define REG_BIST_SCAN 0x00D0 ++#define REG_BIST_RPT 0x00D4 ++#define REG_BIST_ROM_RPT 0x00D8 ++#define REG_USB_SIE_INTF 0x00E0 ++#define REG_PCIE_MIO_INTF 0x00E4 ++#define REG_PCIE_MIO_INTD 0x00E8 ++#define REG_HPON_FSM 0x00EC ++#define REG_SYS_CFG 0x00F0 ++#define REG_MAC_PHY_CTRL_NORMAL 0x00f8 ++ ++#define REG_MAC0 0x0081 ++#define REG_MAC1 0x0053 ++#define FW_MAC0_ready 0x18 ++#define FW_MAC1_ready 0x1A ++#define MAC0_ON BIT7 ++#define MAC1_ON BIT0 ++#define mac0_ready BIT0 ++#define mac1_ready BIT0 ++ ++ ++//----------------------------------------------------- ++// ++// 0x0100h ~ 0x01FFh MACTOP General Configuration ++// ++//----------------------------------------------------- ++#define REG_CR 0x0100 ++#define REG_PBP 0x0104 ++#define REG_TRXDMA_CTRL 0x010C ++#define REG_TRXFF_BNDY 0x0114 ++#define REG_TRXFF_STATUS 0x0118 ++#define REG_RXFF_PTR 0x011C ++#define REG_HIMR 0x0120 ++#define REG_HISR 0x0124 ++#define REG_HIMRE 0x0128 ++#define REG_HISRE 0x012C ++#define REG_CPWM 0x012F ++#define REG_FWIMR 0x0130 ++#define REG_FWISR 0x0134 ++#define REG_FTIMR 0x0138 ++#define REG_PKTBUF_DBG_CTRL 0x0140 ++#define REG_PKTBUF_DBG_DATA_L 0x0144 ++#define REG_PKTBUF_DBG_DATA_H 0x0148 ++ ++#define REG_TC0_CTRL 0x0150 ++#define REG_TC1_CTRL 0x0154 ++#define REG_TC2_CTRL 0x0158 ++#define REG_TC3_CTRL 0x015C ++#define REG_TC4_CTRL 0x0160 ++#define REG_TCUNIT_BASE 0x0164 ++#define REG_MBIST_START 0x0174 ++#define REG_MBIST_DONE 0x0178 ++#define REG_MBIST_FAIL 0x017C ++#define REG_C2HEVT_MSG_NORMAL 0x01A0 ++#define REG_C2HEVT_CLEAR 0x01AF ++#define REG_C2HEVT_MSG_TEST 0x01B8 ++#define REG_MCUTST_1 0x01c0 ++#define REG_FMETHR 0x01C8 ++#define REG_HMETFR 0x01CC ++#define REG_HMEBOX_0 0x01D0 ++#define REG_HMEBOX_1 0x01D4 ++#define REG_HMEBOX_2 0x01D8 ++#define REG_HMEBOX_3 0x01DC ++ ++#define REG_LLT_INIT 0x01E0 ++#define REG_BB_ACCEESS_CTRL 0x01E8 ++#define REG_BB_ACCESS_DATA 0x01EC ++ ++ ++//----------------------------------------------------- ++// ++// 0x0200h ~ 0x027Fh TXDMA Configuration ++// ++//----------------------------------------------------- ++#define REG_RQPN 0x0200 ++#define REG_FIFOPAGE 0x0204 ++#define REG_TDECTRL 0x0208 ++#define REG_TXDMA_OFFSET_CHK 0x020C ++#define REG_TXDMA_STATUS 0x0210 ++#define REG_RQPN_NPQ 0x0214 ++ ++//----------------------------------------------------- ++// ++// 0x0280h ~ 0x02FFh RXDMA Configuration ++// ++//----------------------------------------------------- ++#define REG_RXDMA_AGG_PG_TH 0x0280 ++#define REG_RXPKT_NUM 0x0284 ++#define REG_RXDMA_STATUS 0x0288 ++ ++ ++//----------------------------------------------------- ++// ++// 0x0300h ~ 0x03FFh PCIe ++// ++//----------------------------------------------------- ++#define REG_PCIE_CTRL_REG 0x0300 ++#define REG_INT_MIG 0x0304 // Interrupt Migration ++#define REG_BCNQ_DESA 0x0308 // TX Beacon Descriptor Address ++#define REG_HQ_DESA 0x0310 // TX High Queue Descriptor Address ++#define REG_MGQ_DESA 0x0318 // TX Manage Queue Descriptor Address ++#define REG_VOQ_DESA 0x0320 // TX VO Queue Descriptor Address ++#define REG_VIQ_DESA 0x0328 // TX VI Queue Descriptor Address ++#define REG_BEQ_DESA 0x0330 // TX BE Queue Descriptor Address ++#define REG_BKQ_DESA 0x0338 // TX BK Queue Descriptor Address ++#define REG_RX_DESA 0x0340 // RX Queue Descriptor Address ++#define REG_DBI 0x0348 // Backdoor REG for Access Configuration ++//sherry added for DBI Read/Write 20091126 ++#define REG_DBI_WDATA 0x0348 // Backdoor REG for Access Configuration ++#define REG_DBI_RDATA 0x034C //Backdoor REG for Access Configuration ++#define REG_DBI_CTRL 0x0350 //Backdoor REG for Access Configuration ++#define REG_DBI_FLAG 0x0352 //Backdoor REG for Access Configuration#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY ++#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY ++#define REG_DBG_SEL 0x0360 // Debug Selection Register ++#define REG_PCIE_HRPWM 0x0361 //PCIe RPWM ++#define REG_PCIE_HCPWM 0x0363 //PCIe CPWM ++#define REG_UART_CTRL 0x0364 // UART Control ++#define REG_UART_TX_DESA 0x0370 // UART TX Descriptor Address ++#define REG_UART_RX_DESA 0x0378 // UART Rx Descriptor Address ++ ++ ++// spec version 11 ++//----------------------------------------------------- ++// ++// 0x0400h ~ 0x047Fh Protocol Configuration ++// ++//----------------------------------------------------- ++#define REG_VOQ_INFORMATION 0x0400 ++#define REG_VIQ_INFORMATION 0x0404 ++#define REG_BEQ_INFORMATION 0x0408 ++#define REG_BKQ_INFORMATION 0x040C ++#define REG_MGQ_INFORMATION 0x0410 ++#define REG_HGQ_INFORMATION 0x0414 ++#define REG_BCNQ_INFORMATION 0x0418 ++ ++ ++#define REG_CPU_MGQ_INFORMATION 0x041C ++#define REG_FWHW_TXQ_CTRL 0x0420 ++#define REG_HWSEQ_CTRL 0x0423 ++#define REG_TXPKTBUF_BCNQ_BDNY 0x0424 ++#define REG_TXPKTBUF_MGQ_BDNY 0x0425 ++#define REG_LIFETIME_EN 0x0426 ++#define REG_MULTI_BCNQ_OFFSET 0x0427 ++#define REG_SPEC_SIFS 0x0428 ++#define REG_RL 0x042A ++#define REG_DARFRC 0x0430 ++#define REG_RARFRC 0x0438 ++#define REG_RRSR 0x0440 ++#define REG_ARFR0 0x0444 ++#define REG_ARFR1 0x0448 ++#define REG_ARFR2 0x044C ++#define REG_ARFR3 0x0450 ++#define REG_AGGLEN_LMT 0x0458 ++#define REG_AMPDU_MIN_SPACE 0x045C ++#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D ++#define REG_FAST_EDCA_CTRL 0x0460 ++#define REG_RD_RESP_PKT_TH 0x0463 ++#define REG_INIRTS_RATE_SEL 0x0480 ++#define REG_INIDATA_RATE_SEL 0x0484 ++ ++//#define REG_FW_TSF_SYNC_CNT 0x04A0 ++#define REG_FW_RESET_TSF_CNT_1 0x05FC ++#define REG_FW_RESET_TSF_CNT_0 0x05FD ++#define REG_FW_BCN_DIS_CNT 0x05FE ++ ++#define REG_POWER_STATUS 0x04A4 ++#define REG_POWER_STAGE1 0x04B4 ++#define REG_POWER_STAGE2 0x04B8 ++#define REG_PKT_VO_VI_LIFE_TIME 0x04C0 ++#define REG_PKT_BE_BK_LIFE_TIME 0x04C2 ++#define REG_STBC_SETTING 0x04C4 ++#define REG_PROT_MODE_CTRL 0x04C8 ++#define REG_MAX_AGGR_NUM 0x04CA ++#define REG_RTS_MAX_AGGR_NUM 0x04CB ++#define REG_BAR_MODE_CTRL 0x04CC ++#define REG_RA_TRY_RATE_AGG_LMT 0x04CF ++#define REG_EARLY_MODE_CONTROL 0x04D0 ++#define REG_NQOS_SEQ 0x04DC ++#define REG_QOS_SEQ 0x04DE ++#define REG_NEED_CPU_HANDLE 0x04E0 ++#define REG_PKT_LOSE_RPT 0x04E1 ++#define REG_PTCL_ERR_STATUS 0x04E2 ++#define REG_DUMMY 0x04FC ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0500h ~ 0x05FFh EDCA Configuration ++// ++//----------------------------------------------------- ++#define REG_EDCA_VO_PARAM 0x0500 ++#define REG_EDCA_VI_PARAM 0x0504 ++#define REG_EDCA_BE_PARAM 0x0508 ++#define REG_EDCA_BK_PARAM 0x050C ++#define REG_BCNTCFG 0x0510 ++#define REG_PIFS 0x0512 ++#define REG_RDG_PIFS 0x0513 ++#define REG_SIFS_CTX 0x0514 ++#define REG_SIFS_TRX 0x0516 ++#define REG_TSFTR_SYN_OFFSET 0x0518 ++#define REG_AGGR_BREAK_TIME 0x051A ++#define REG_SLOT 0x051B ++#define REG_TX_PTCL_CTRL 0x0520 ++#define REG_TXPAUSE 0x0522 ++#define REG_DIS_TXREQ_CLR 0x0523 ++#define REG_RD_CTRL 0x0524 ++#define REG_TBTT_PROHIBIT 0x0540 ++#define REG_RD_NAV_NXT 0x0544 ++#define REG_NAV_PROT_LEN 0x0546 ++#define REG_BCN_CTRL 0x0550 ++#define REG_BCN_CTRL_1 0x0551 ++#define REG_MBID_NUM 0x0552 ++#define REG_DUAL_TSF_RST 0x0553 ++#define REG_BCN_INTERVAL 0x0554 // The same as REG_MBSSID_BCN_SPACE ++#define REG_MBSSID_BCN_SPACE 0x0554 ++#define REG_DRVERLYINT 0x0558 ++#define REG_BCNDMATIM 0x0559 ++#define REG_ATIMWND 0x055A ++#define REG_USTIME_TSF 0x055C ++#define REG_BCN_MAX_ERR 0x055D ++#define REG_RXTSF_OFFSET_CCK 0x055E ++#define REG_RXTSF_OFFSET_OFDM 0x055F ++#define REG_TSFTR 0x0560 ++#define REG_TSFTR1 0x0568 ++#define REG_INIT_TSFTR 0x0564 ++#define REG_ATIMWND_1 0x0570 ++#define REG_PSTIMER 0x0580 ++#define REG_TIMER0 0x0584 ++#define REG_TIMER1 0x0588 ++#define REG_ACMHWCTRL 0x05C0 ++#define REG_ACMRSTCTRL 0x05C1 ++#define REG_ACMAVG 0x05C2 ++#define REG_VO_ADMTIME 0x05C4 ++#define REG_VI_ADMTIME 0x05C6 ++#define REG_BE_ADMTIME 0x05C8 ++#define REG_EDCA_RANDOM_GEN 0x05CC ++#define REG_SCH_TXCMD 0x05D0 ++ ++#define REG_DMC 0x05F0 //Dual MAC Co-Existence Register ++ ++ ++//----------------------------------------------------- ++// ++// 0x0600h ~ 0x07FFh WMAC Configuration ++// ++//----------------------------------------------------- ++#define REG_APSD_CTRL 0x0600 ++#define REG_BWOPMODE 0x0603 ++#define REG_TCR 0x0604 ++#define REG_RCR 0x0608 ++#define REG_RX_PKT_LIMIT 0x060C ++#define REG_RX_DLK_TIME 0x060D ++#define REG_RX_DRVINFO_SZ 0x060F ++ ++#define REG_MACID 0x0610 ++#define REG_BSSID 0x0618 ++#define REG_MAR 0x0620 ++#define REG_MBIDCAMCFG 0x0628 ++ ++#define REG_USTIME_EDCA 0x0638 ++#define REG_MAC_SPEC_SIFS 0x063A ++#define REG_RESP_SIFS_CCK 0x063C ++#define REG_RESP_SIFS_OFDM 0x063E ++#define REG_ACKTO 0x0640 ++#define REG_CTS2TO 0x0641 ++#define REG_EIFS 0x0642 ++ ++ ++//WMA, BA, CCX ++#define REG_NAV_CTRL 0x0650 ++#define REG_BACAMCMD 0x0654 ++#define REG_BACAMCONTENT 0x0658 ++#define REG_LBDLY 0x0660 ++#define REG_FWDLY 0x0661 ++#define REG_RXERR_RPT 0x0664 ++#define REG_WMAC_TRXPTCL_CTL 0x0668 ++ ++ ++// Security ++#define REG_CAMCMD 0x0670 ++#define REG_CAMWRITE 0x0674 ++#define REG_CAMREAD 0x0678 ++#define REG_CAMDBG 0x067C ++#define REG_SECCFG 0x0680 ++ ++// Power ++#define REG_WOW_CTRL 0x0690 ++#define REG_PSSTATUS 0x0691 ++#define REG_PS_RX_INFO 0x0692 ++#define REG_LPNAV_CTRL 0x0694 ++#define REG_WKFMCAM_CMD 0x0698 ++#define REG_WKFMCAM_RWD 0x069C ++#define REG_RXFLTMAP0 0x06A0 ++#define REG_RXFLTMAP1 0x06A2 ++#define REG_RXFLTMAP2 0x06A4 ++#define REG_BCN_PSR_RPT 0x06A8 ++#define REG_CALB32K_CTRL 0x06AC ++#define REG_PKT_MON_CTRL 0x06B4 ++#define REG_BT_COEX_TABLE 0x06C0 ++#define REG_WMAC_RESP_TXINFO 0x06D8 ++ ++#define REG_MACID1 0x0700 ++#define REG_BSSID1 0x0708 ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++#define REG_USB_INFO 0xFE17 ++#define REG_USB_SPECIAL_OPTION 0xFE55 ++#define REG_USB_DMA_AGG_TO 0xFE5B ++#define REG_USB_AGG_TO 0xFE5C ++#define REG_USB_AGG_TH 0xFE5D ++ ++// for 92DU high_Queue low_Queue Normal_Queue select ++#define REG_USB_High_NORMAL_Queue_Select_MAC0 0xFE44 ++//#define REG_USB_LOW_Queue_Select_MAC0 0xFE45 ++#define REG_USB_High_NORMAL_Queue_Select_MAC1 0xFE47 ++//#define REG_USB_LOW_Queue_Select_MAC1 0xFE48 ++ ++// For test chip ++#define REG_TEST_USB_TXQS 0xFE48 ++#define REG_TEST_SIE_VID 0xFE60 // 0xFE60~0xFE61 ++#define REG_TEST_SIE_PID 0xFE62 // 0xFE62~0xFE63 ++#define REG_TEST_SIE_OPTIONAL 0xFE64 ++#define REG_TEST_SIE_CHIRP_K 0xFE65 ++#define REG_TEST_SIE_PHY 0xFE66 // 0xFE66~0xFE6B ++#define REG_TEST_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 ++#define REG_TEST_SIE_STRING 0xFE80 // 0xFE80~0xFEB9 ++ ++ ++// For normal chip ++#define REG_NORMAL_SIE_VID 0xFE60 // 0xFE60~0xFE61 ++#define REG_NORMAL_SIE_PID 0xFE62 // 0xFE62~0xFE63 ++#define REG_NORMAL_SIE_OPTIONAL 0xFE64 ++#define REG_NORMAL_SIE_EP 0xFE65 // 0xFE65~0xFE67 ++#define REG_NORMAL_SIE_PHY 0xFE68 // 0xFE68~0xFE6B ++#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 ++#define REG_NORMAL_SIE_STRING 0xFE80 // 0xFE80~0xFEDF ++ ++ ++//----------------------------------------------------- ++// ++// Redifine 8192C register definition for compatibility ++// ++//----------------------------------------------------- ++ ++// TODO: use these definition when using REG_xxx naming rule. ++// NOTE: DO NOT Remove these definition. Use later. ++ ++#define SYS_ISO_CTRL REG_SYS_ISO_CTRL // System Isolation Interface Control. ++#define SYS_FUNC_EN REG_SYS_FUNC_EN // System Function Enable. ++#define SYS_CLK REG_SYS_CLKR ++#define CR9346 REG_9346CR // 93C46/93C56 Command Register. ++#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control. ++#define EFUSE_TEST REG_EFUSE_TEST // E-Fuse Test. ++#define MSR (REG_CR + 2) // Media Status register ++#define ISR REG_HISR ++#define TSFR REG_TSFTR // Timing Sync Function Timer Register. ++ ++#define MACIDR0 REG_MACID // MAC ID Register, Offset 0x0050-0x0053 ++#define MACIDR4 (REG_MACID + 4) // MAC ID Register, Offset 0x0054-0x0055 ++ ++#define PBP REG_PBP ++ ++// Redifine MACID register, to compatible prior ICs. ++#define IDR0 MACIDR0 ++#define IDR4 MACIDR4 ++ ++ ++// ++// 9. Security Control Registers (Offset: ) ++// ++#define RWCAM REG_CAMCMD //IN 8190 Data Sheet is called CAMcmd ++#define WCAMI REG_CAMWRITE // Software write CAM input content ++#define RCAMO REG_CAMREAD // Software read/write CAM config ++#define CAMDBG REG_CAMDBG ++#define SECR REG_SECCFG //Security Configuration Register ++ ++// Unused register ++#define UnusedRegister 0x1BF ++#define DCAM UnusedRegister ++#define PSR UnusedRegister ++#define BBAddr UnusedRegister ++#define PhyDataR UnusedRegister ++ ++#define InvalidBBRFValue 0x12345678 ++ ++// Min Spacing related settings. ++#define MAX_MSS_DENSITY_2T 0x13 ++#define MAX_MSS_DENSITY_1T 0x0A ++ ++//---------------------------------------------------------------------------- ++// 8192C Cmd9346CR bits (Offset 0xA, 16bit) ++//---------------------------------------------------------------------------- ++#define CmdEEPROM_En BIT5 // EEPROM enable when set 1 ++#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 ++#define Cmd9346CR_9356SEL BIT4 ++#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL) ++#define AutoLoadEFUSE CmdEEPROM_En ++ ++// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIOSEL_GPIO 0 ++#define GPIOSEL_ENBT BIT5 ++ ++//---------------------------------------------------------------------------- ++// 8192C GPIO PIN Control Register (offset 0x44, 4 byte) ++//---------------------------------------------------------------------------- ++#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value ++#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value ++#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. ++#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) ++//---------------------------------------------------------------------------- ++/* ++Network Type ++00: No link ++01: Link in ad hoc network ++10: Link in infrastructure network ++11: AP mode ++Default: 00b. ++*/ ++#define MSR_NOLINK 0x00 ++#define MSR_ADHOC 0x01 ++#define MSR_INFRA 0x02 ++#define MSR_AP 0x03 ++ ++// ++// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) ++// ++//---------------------------------------------------------------------------- ++// 8192C Response Rate Set Register (offset 0x181, 24bits) ++//---------------------------------------------------------------------------- ++#define RRSR_RSC_OFFSET 21 ++#define RRSR_SHORT_OFFSET 23 ++#define RRSR_RSC_BW_40M 0x600000 ++#define RRSR_RSC_UPSUBCHNL 0x400000 ++#define RRSR_RSC_LOWSUBCHNL 0x200000 ++#define RRSR_SHORT 0x800000 ++#define RRSR_1M BIT0 ++#define RRSR_2M BIT1 ++#define RRSR_5_5M BIT2 ++#define RRSR_11M BIT3 ++#define RRSR_6M BIT4 ++#define RRSR_9M BIT5 ++#define RRSR_12M BIT6 ++#define RRSR_18M BIT7 ++#define RRSR_24M BIT8 ++#define RRSR_36M BIT9 ++#define RRSR_48M BIT10 ++#define RRSR_54M BIT11 ++#define RRSR_MCS0 BIT12 ++#define RRSR_MCS1 BIT13 ++#define RRSR_MCS2 BIT14 ++#define RRSR_MCS3 BIT15 ++#define RRSR_MCS4 BIT16 ++#define RRSR_MCS5 BIT17 ++#define RRSR_MCS6 BIT18 ++#define RRSR_MCS7 BIT19 ++#define BRSR_AckShortPmb BIT23 ++// CCK ACK: use Short Preamble or not ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C Rate Definition ++//---------------------------------------------------------------------------- ++//CCK ++#define RATR_1M 0x00000001 ++#define RATR_2M 0x00000002 ++#define RATR_55M 0x00000004 ++#define RATR_11M 0x00000008 ++//OFDM ++#define RATR_6M 0x00000010 ++#define RATR_9M 0x00000020 ++#define RATR_12M 0x00000040 ++#define RATR_18M 0x00000080 ++#define RATR_24M 0x00000100 ++#define RATR_36M 0x00000200 ++#define RATR_48M 0x00000400 ++#define RATR_54M 0x00000800 ++//MCS 1 Spatial Stream ++#define RATR_MCS0 0x00001000 ++#define RATR_MCS1 0x00002000 ++#define RATR_MCS2 0x00004000 ++#define RATR_MCS3 0x00008000 ++#define RATR_MCS4 0x00010000 ++#define RATR_MCS5 0x00020000 ++#define RATR_MCS6 0x00040000 ++#define RATR_MCS7 0x00080000 ++//MCS 2 Spatial Stream ++#define RATR_MCS8 0x00100000 ++#define RATR_MCS9 0x00200000 ++#define RATR_MCS10 0x00400000 ++#define RATR_MCS11 0x00800000 ++#define RATR_MCS12 0x01000000 ++#define RATR_MCS13 0x02000000 ++#define RATR_MCS14 0x04000000 ++#define RATR_MCS15 0x08000000 ++ ++//---------------------------------------------------------------------------- ++// 8192C BW_OPMODE bits (Offset 0x203, 8bit) ++//---------------------------------------------------------------------------- ++#define BW_OPMODE_20MHZ BIT2 ++#define BW_OPMODE_5G BIT1 ++#define BW_OPMODE_11J BIT0 ++ ++ ++//---------------------------------------------------------------------------- ++// 8192C CAM Config Setting (offset 0x250, 1 byte) ++//---------------------------------------------------------------------------- ++#define CAM_VALID BIT15 ++#define CAM_NOTVALID 0x0000 ++#define CAM_USEDK BIT5 ++ ++#define CAM_CONTENT_COUNT 8 ++ ++#define CAM_NONE 0x0 ++#define CAM_WEP40 0x01 ++#define CAM_TKIP 0x02 ++#define CAM_AES 0x04 ++#define CAM_WEP104 0x05 ++#define CAM_SMS4 0x6 ++ ++ ++#define TOTAL_CAM_ENTRY 32 ++#define HALF_CAM_ENTRY 16 ++ ++#define CAM_CONFIG_USEDK _TRUE ++#define CAM_CONFIG_NO_USEDK _FALSE ++ ++#define CAM_WRITE BIT16 ++#define CAM_READ 0x00000000 ++#define CAM_POLLINIG BIT31 ++ ++#define SCR_UseDK 0x01 ++#define SCR_TxSecEnable 0x02 ++#define SCR_RxSecEnable 0x04 ++ ++ ++// ++// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) ++// ++//---------------------------------------------------------------------------- ++// 8190 IMR/ISR bits (offset 0xfd, 8bits) ++//---------------------------------------------------------------------------- ++#define IMR8190_DISABLED 0x0 ++// IMR DW0 Bit 0-31 ++#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6 ++#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5 ++#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4 ++#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3 ++#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2 ++#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1 ++#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8 ++#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7 ++#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6 ++#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5 ++#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4 ++#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3 ++#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2 ++#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1 ++#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2 ++#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1 ++#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow ++#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt ++#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0 ++#define IMR_RXFOVW BIT12 // Receive FIFO Overflow ++#define IMR_RDU BIT11 // Receive Descriptor Unavailable ++#define IMR_ATIMEND BIT10 // For 92C,ATIM Window End Interrupt ++#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup ++#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt ++#define IMR_TBDOK BIT7 // Transmit Beacon OK interrup ++#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt ++#define IMR_TBDER BIT5 // For 92C,Transmit Beacon Error Interrupt ++#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt ++#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt ++#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt ++#define IMR_VODOK BIT1 // AC_VO DMA Interrupt ++#define IMR_ROK BIT0 // Receive DMA OK Interrupt ++ ++// 13. Host Interrupt Status Extension Register (Offset: 0x012C-012Eh) ++#define IMR_TXERR BIT11 ++#define IMR_RXERR BIT10 ++#define IMR_C2HCMD BIT9 ++#define IMR_CPWM BIT8 ++//RSVD [2-7] ++#define IMR_OCPINT BIT1 ++#define IMR_WLANOFF BIT0 ++ ++ ++ ++//---------------------------------------------------------------------------- ++// 8192D EFUSE ++//---------------------------------------------------------------------------- ++#define HWSET_MAX_SIZE 256 ++ ++//---------------------------------------------------------------------------- ++// 8192C EEPROM/EFUSE share register definition. ++//---------------------------------------------------------------------------- ++ ++// ++// Default Value for EEPROM or EFUSE!!! ++// ++#define EEPROM_Default_TSSI 0x0 ++#define EEPROM_Default_TxPowerDiff 0x0 ++#define EEPROM_Default_CrystalCap 0x0 //92D default 0x0 ++#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192CE(QFPN68) ++#define EEPROM_Default_TxPower 0x1010 ++#define EEPROM_Default_HT2T_TxPwr 0x10 ++ ++#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 ++#define EEPROM_Default_ThermalMeter 0x12 ++ ++#define EEPROM_Default_AntTxPowerDiff 0x0 ++//#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 ++#define EEPROM_Default_TxPowerLevel_2G 0x2C ++#define EEPROM_Default_TxPowerLevel_5G 0x22 ++ ++#define EEPROM_Default_HT40_2SDiff 0x0 ++#define EEPROM_Default_HT20_Diff 2 // HT20<->40 default Tx Power Index Difference ++#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 //OFDM Tx Power index diff ++#define EEPROM_Default_HT40_PwrMaxOffset 0 ++#define EEPROM_Default_HT20_PwrMaxOffset 0 ++ ++// For debug ++#define EEPROM_Default_PID 0x1234 ++#define EEPROM_Default_VID 0x5678 ++#define EEPROM_Default_CustomerID 0xAB ++#define EEPROM_Default_SubCustomerID 0xCD ++#define EEPROM_Default_Version 0 ++ ++#define EEPROM_Default_externalPA_C9 0x00 ++#define EEPROM_Default_externalPA_CC 0xFF ++#define EEPROM_Default_internalPA_SP3T_C9 0xAA ++#define EEPROM_Default_internalPA_SP3T_CC 0xAF ++#define EEPROM_Default_internalPA_SPDT_C9 0xAA ++#ifdef CONFIG_PCI_HCI ++#define EEPROM_Default_internalPA_SPDT_CC 0xA0 ++#else ++#define EEPROM_Default_internalPA_SPDT_CC 0xFA ++#endif ++ ++#define EEPROM_CHANNEL_PLAN_FCC 0x0 ++#define EEPROM_CHANNEL_PLAN_IC 0x1 ++#define EEPROM_CHANNEL_PLAN_ETSI 0x2 ++#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 ++#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 ++#define EEPROM_CHANNEL_PLAN_MKK 0x5 ++#define EEPROM_CHANNEL_PLAN_MKK1 0x6 ++#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 ++#define EEPROM_CHANNEL_PLAN_TELEC 0x8 ++#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 ++#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA ++#define EEPROM_CHANNEL_PLAN_NCC 0xB ++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 ++ ++ ++#define EEPROM_CID_DEFAULT 0x0 ++#define EEPROM_CID_TOSHIBA 0x4 ++#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. ++#define EEPROM_CID_QMI 0x0D ++#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 ++ ++ ++#define RTL8192_EEPROM_ID 0x8129 ++#define EEPROM_WAPI_SUPPORT 0x78 ++ ++ ++#ifdef CONFIG_PCI_HCI ++#define RT_IBSS_INT_MASKS (IMR_BcnInt | IMR_TBDOK | IMR_TBDER) ++#define RT_AC_INT_MASKS (IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK) ++#define RT_BSS_INT_MASKS (RT_IBSS_INT_MASKS) ++ ++#define RTL8190_EEPROM_ID 0x8129 // 0-1 ++#define EEPROM_HPON 0x02 // LDO settings.2-5 ++#define EEPROM_CLK 0x06 // Clock settings.6-7 ++#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8 ++ ++#define EEPROM_VID 0x28 // SE Vendor ID.A-B ++#define EEPROM_DID 0x2A // SE Device ID. C-D ++#define EEPROM_SVID 0x2C // SE Vendor ID.E-F ++#define EEPROM_SMID 0x2E // SE PCI Subsystem ID. 10-11 ++ ++#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17 ++#define EEPROM_MAC_ADDR_MAC0_92D 0x55 ++#define EEPROM_MAC_ADDR_MAC1_92D 0x5B ++//---------------------------------------------------------------- ++// 2.4G band Tx power index setting ++#define EEPROM_CCK_TX_PWR_INX_2G 0x61 ++#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D ++#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73 ++#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76 ++#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79 ++ ++//5GL channel 32-64 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82 ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88 ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E ++ ++//5GM channel 100-140 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97 ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0 ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3 ++ ++//5GH channel 149-165 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2 ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5 ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8 ++ ++#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels. ++#define EEPROM_IQK_DELTA 0xBC ++#define EEPROM_LCK_DELTA 0xBC ++#define EEPROM_XTAL_K 0xBD //[7:5] ++#define EEPROM_TSSI_A_5G 0xBE ++#define EEPROM_TSSI_B_5G 0xBF ++#define EEPROM_TSSI_AB_5G 0xC0 ++#define EEPROM_THERMAL_METER 0xC3 //[4:0] ++#define EEPROM_PATHDIV 0xC4 ++#define EEPROM_RF_OPT1 0xC4 ++#define EEPROM_RF_OPT2 0xC5 ++#define EEPROM_RF_OPT3 0xC6 ++#define EEPROM_RF_OPT4 0xC7 ++#define EEPROM_RF_OPT5 0xC8 ++#define EEPROM_RF_OPT6 0xC9 ++#define EEPROM_VERSION 0xCA ++#define EEPROM_CUSTOMER_ID 0xCB ++#define EEPROM_RF_OPT7 0xCC ++ ++#define EEPROM_WIDIPAIRING_ADDR 0xF0 ++#define EEPROM_WIDIPAIRING_KEY 0xF6 ++ ++#define EEPROM_DEF_PART_NO 0x3FD //Byte ++#define EEPROME_CHIP_VERSION_L 0x3FF ++#define EEPROME_CHIP_VERSION_H 0x3FE ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#define RTL8190_EEPROM_ID 0x8129 // 0-1 ++#define EEPROM_HPON 0x02 // LDO settings.2-5 ++#define EEPROM_CLK 0x06 // Clock settings.6-7 ++#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8 ++ ++#define EEPROM_VID 0xC // SE Vendor ID.A-B ++#define EEPROM_PID 0xE // SE Device ID. C-D ++#define EEPROM_ENDPOINT_SETTING 0x10 ++#ifdef CONFIG_WOWLAN ++#define EEPROM_Option_Setting 0x11 ++#endif // CONFIG_WOWLAN ++#define EEPROM_CHIRP_K 0x12 // Changed ++#define EEPROM_USB_PHY 0x13 // Changed ++#define EEPROM_NORMAL_BoardType EEPROM_RF_OPT1 //[7:5] ++#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17 ++#define EEPROM_STRING 0x1F ++#define EEPROM_SUBCUSTOMER_ID 0x59 ++ ++#define EEPROM_MAC_ADDR_MAC0_92D 0x19 ++#define EEPROM_MAC_ADDR_MAC1_92D 0x5B ++//---------------------------------------------------------------- ++// 2.4G band Tx power index setting ++#define EEPROM_CCK_TX_PWR_INX_2G 0x61 ++#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D ++#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73 ++#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76 ++#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79 ++ ++//5GL channel 32-64 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82 ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85 ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88 ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E ++ ++//5GM channel 100-140 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97 ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0 ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3 ++ ++//5GH channel 149-165 ++#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6 ++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC ++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF ++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2 ++#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5 ++#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8 ++ ++#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels. ++#define EEPROM_TEST_CHANNEL_PLAN 0xBB ++#define EEPROM_IQK_DELTA 0xBC ++#define EEPROM_LCK_DELTA 0xBC ++#define EEPROM_XTAL_K 0xBD //[7:5] ++#define EEPROM_TSSI_A_5G 0xBE ++#define EEPROM_TSSI_B_5G 0xBF ++#define EEPROM_TSSI_AB_5G 0xC0 ++#define EEPROM_THERMAL_METER 0xC3 //[4:0] ++#define EEPROM_RF_OPT1 0xC4 ++#define EEPROM_RF_OPT2 0xC5 ++#define EEPROM_RF_OPT3 0xC6 ++#define EEPROM_RF_OPT4 0xC7 ++#define EEPROM_RF_OPT5 0xC8 ++#define EEPROM_RF_OPT6 0xC9 ++#define EEPROM_VERSION 0xCA ++#define EEPROM_CUSTOMER_ID 0xCB ++#define EEPROM_RF_OPT7 0xCC ++ ++#define EEPROM_DEF_PART_NO 0x3FD //Byte ++#define EEPROME_CHIP_VERSION_L 0x3FF ++#define EEPROME_CHIP_VERSION_H 0x3FE ++ ++//------------------------------------------------------------- ++// EEPROM content definitions ++//------------------------------------------------------------- ++#define OS_LINK_SPEED_NORMAL_MASK BIT3 | BIT2 ++#define OS_LINK_SPEED_TEST_MASK BIT3 | BIT4 ++ ++#define BOARD_TYPE_NORMAL_MASK 0xE0 ++#define BOARD_TYPE_TEST_MASK 0xF ++ ++#define BT_COEXISTENCE_TEST BIT4 ++#define BT_COEXISTENCE_NORMAL BIT5 ++ ++#define BT_CO_SHIFT_TEST 4 ++#define BT_CO_SHIFT_NORMAL 5 ++ ++#define EP_NUMBER_MASK_TEST 0x30 //bit 4:5 0Eh ++#define EP_NUMBER_SHIFT_TEST 4 ++ ++#define USB_PHY_PARA_SIZE_TEST 6 ++#define USB_PHY_PARA_SIZE_NORMAL 4 ++ ++//------------------------------------------------------------- ++// EEPROM default value definitions ++//------------------------------------------------------------- ++// Use 0xABCD instead of 0x8192 for debug ++#define EEPROM_DEF_ID_0 0xCD // Byte 0x00 ++#define EEPROM_DEF_ID_1 0xAB // Byte 0x01 ++ ++#define EEPROM_DEF_RTK_RSV_A3 0x74 // Byte 0x03 ++#define EEPROM_DEF_RTK_RSV_A4 0x6D // Byte 0x04 ++#define EEPROM_DEF_RTK_RSV_A8 0xFF // Byte 0x08 ++ ++#define EEPROM_DEF_VID_0 0x0A // Byte 0x0A ++#define EEPROM_DEF_VID_1 0x0B ++ ++#define EEPROM_DEF_PID_0 0x92 // Byte 0x0C ++#define EEPROM_DEF_PID_1 0x81 ++ ++ ++#define EEPROM_TEST_DEF_USB_OPT 0x80 // Byte 0x0E ++#define EEPROM_NORMAL_DEF_USB_OPT 0x00 // Byte 0x0E ++ ++#define EEPROM_DEF_CHIRPK 0x15 // Byte 0x0F ++ ++#define EEPROM_DEF_USB_PHY_0 0x85 // Byte 0x10 ++#define EEPROM_DEF_USB_PHY_1 0x62 // Byte 0x11 ++#define EEPROM_DEF_USB_PHY_2 0x9E // Byte 0x12 ++#define EEPROM_DEF_USB_PHY_3 0x06 // Byte 0x13 ++ ++#define EEPROM_DEF_TSSI_A 0x09 // Byte 0x78 ++#define EEPROM_DEF_TSSI_B 0x09 // Byte 0x79 ++ ++ ++#define EEPROM_DEF_THERMAL_METER 0x12 // Byte 0x7A ++ ++ ++#define EEPROM_USB_SN BIT(0) ++#define EEPROM_USB_REMOTE_WAKEUP BIT(1) ++#define EEPROM_USB_DEVICE_PWR BIT(2) ++#define EEPROM_EP_NUMBER (BIT(3)|BIT(4)) ++ ++#if 0 ++#define EEPROM_CHANNEL_PLAN_FCC 0x0 ++#define EEPROM_CHANNEL_PLAN_IC 0x1 ++#define EEPROM_CHANNEL_PLAN_ETSI 0x2 ++#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 ++#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 ++#define EEPROM_CHANNEL_PLAN_MKK 0x5 ++#define EEPROM_CHANNEL_PLAN_MKK1 0x6 ++#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 ++#define EEPROM_CHANNEL_PLAN_TELEC 0x8 ++#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 ++#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA ++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 ++ ++#define EEPROM_CID_DEFAULT 0x0 ++ ++#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 ++ ++ ++#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. ++ ++#endif ++#endif ++ ++ ++/*=================================================================== ++===================================================================== ++Here the register defines are for 92C. When the define is as same with 92C, ++we will use the 92C's define for the consistency ++So the following defines for 92C is not entire!!!!!! ++===================================================================== ++=====================================================================*/ ++/* ++Based on Datasheet V33---090401 ++Register Summary ++Current IOREG MAP ++0x0000h ~ 0x00FFh System Configuration (256 Bytes) ++0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) ++0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) ++0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) ++0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) ++0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) ++0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) ++0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) ++0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) ++*/ ++ ++//---------------------------------------------------------------------------- ++// 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) ++//---------------------------------------------------------------------------- ++#define RCR_APPFCS BIT31 //WMAC append FCS after pauload ++#define RCR_APP_MIC BIT30 // ++#define RCR_APP_ICV BIT29 // ++#define RCR_APP_PHYST_RXFF BIT28 // ++#define RCR_APP_BA_SSN BIT27 //Accept BA SSN ++#define RCR_ENMBID BIT24 //Enable Multiple BssId. ++#define RCR_LSIGEN BIT23 ++#define RCR_MFBEN BIT22 ++#define RCR_HTC_LOC_CTRL BIT14 //MFC<--HTC=1 MFC-->HTC=0 ++#define RCR_AMF BIT13 //Accept management type frame ++#define RCR_ACF BIT12 //Accept control type frame ++#define RCR_ADF BIT11 //Accept data type frame ++#define RCR_AICV BIT9 //Accept ICV error packet ++#define RCR_ACRC32 BIT8 //Accept CRC32 error packet ++#define RCR_CBSSID_BCN BIT7 //Accept BSSID match packet (Rx beacon, probe rsp) ++#define RCR_CBSSID_DATA BIT6 //Accept BSSID match packet (Data) ++#define RCR_CBSSID RCR_CBSSID_DATA //Accept BSSID match packet ++#define RCR_APWRMGT BIT5 //Accept power management packet ++#define RCR_ADD3 BIT4 //Accept address 3 match packet ++#define RCR_AB BIT3 //Accept broadcast packet ++#define RCR_AM BIT2 //Accept multicast packet ++#define RCR_APM BIT1 //Accept physical match packet ++#define RCR_AAP BIT0 //Accept all unicast packet ++#define RCR_MXDMA_OFFSET 8 ++#define RCR_FIFO_OFFSET 13 ++ ++ ++ ++//============================================================================ ++// 8192c USB specific Regsiter Offset and Content definition, ++// 2009.08.18, added by vivi. for merge 92c and 92C into one driver ++//============================================================================ ++//#define APS_FSMCO 0x0004 same with 92Ce ++#define RSV_CTRL 0x001C ++#define RD_CTRL 0x0524 ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++#define REG_USB_INFO 0xFE17 ++#define REG_USB_SPECIAL_OPTION 0xFE55 ++#define REG_USB_DMA_AGG_TO 0xFE5B ++#define REG_USB_AGG_TO 0xFE5C ++#define REG_USB_AGG_TH 0xFE5D ++ ++#define REG_USB_VID 0xFE60 ++#define REG_USB_PID 0xFE62 ++#define REG_USB_OPTIONAL 0xFE64 ++#define REG_USB_CHIRP_K 0xFE65 ++#define REG_USB_PHY 0xFE66 ++#define REG_USB_MAC_ADDR 0xFE70 ++ ++#define REG_USB_HRPWM 0xFE58 ++#define REG_USB_HCPWM 0xFE57 ++ ++#define InvalidBBRFValue 0x12345678 ++ ++//============================================================================ ++// 8192C Regsiter Bit and Content definition ++//============================================================================ ++//----------------------------------------------------- ++// ++// 0x0000h ~ 0x00FFh System Configuration ++// ++//----------------------------------------------------- ++ ++//2 SPS0_CTRL ++#define SW18_FPWM BIT(3) ++ ++ ++//2 SYS_ISO_CTRL ++#define ISO_MD2PP BIT(0) ++#define ISO_UA2USB BIT(1) ++#define ISO_UD2CORE BIT(2) ++#define ISO_PA2PCIE BIT(3) ++#define ISO_PD2CORE BIT(4) ++#define ISO_IP2MAC BIT(5) ++#define ISO_DIOP BIT(6) ++#define ISO_DIOE BIT(7) ++#define ISO_EB2CORE BIT(8) ++#define ISO_DIOR BIT(9) ++ ++#define PWC_EV25V BIT(14) ++#define PWC_EV12V BIT(15) ++ ++ ++//2 SYS_FUNC_EN ++#define FEN_BBRSTB BIT(0) ++#define FEN_BB_GLB_RSTn BIT(1) ++#define FEN_USBA BIT(2) ++#define FEN_UPLL BIT(3) ++#define FEN_USBD BIT(4) ++#define FEN_DIO_PCIE BIT(5) ++#define FEN_PCIEA BIT(6) ++#define FEN_PPLL BIT(7) ++#define FEN_PCIED BIT(8) ++#define FEN_DIOE BIT(9) ++#define FEN_CPUEN BIT(10) ++#define FEN_DCORE BIT(11) ++#define FEN_ELDR BIT(12) ++#define FEN_DIO_RF BIT(13) ++#define FEN_HWPDN BIT(14) ++#define FEN_MREGEN BIT(15) ++ ++//2 APS_FSMCO ++#define PFM_LDALL BIT(0) ++#define PFM_ALDN BIT(1) ++#define PFM_LDKP BIT(2) ++#define PFM_WOWL BIT(3) ++#define EnPDN BIT(4) ++#define PDN_PL BIT(5) ++#define APFM_ONMAC BIT(8) ++#define APFM_OFF BIT(9) ++#define APFM_RSM BIT(10) ++#define AFSM_HSUS BIT(11) ++#define AFSM_PCIE BIT(12) ++#define APDM_MAC BIT(13) ++#define APDM_HOST BIT(14) ++#define APDM_HPDN BIT(15) ++#define RDY_MACON BIT(16) ++#define SUS_HOST BIT(17) ++#define ROP_ALD BIT(20) ++#define ROP_PWR BIT(21) ++#define ROP_SPS BIT(22) ++#define SOP_MRST BIT(25) ++#define SOP_FUSE BIT(26) ++#define SOP_ABG BIT(27) ++#define SOP_AMB BIT(28) ++#define SOP_RCK BIT(29) ++#define SOP_A8M BIT(30) ++#define XOP_BTCK BIT(31) ++ ++//2 SYS_CLKR ++#define ANAD16V_EN BIT(0) ++#define ANA8M BIT(1) ++#define MACSLP BIT(4) ++#define LOADER_CLK_EN BIT(5) ++#define _80M_SSC_DIS BIT(7) ++#define _80M_SSC_EN_HO BIT(8) ++#define PHY_SSC_RSTB BIT(9) ++#define SEC_CLK_EN BIT(10) ++#define MAC_CLK_EN BIT(11) ++#define SYS_CLK_EN BIT(12) ++#define RING_CLK_EN BIT(13) ++ ++ ++//2 9346CR ++ ++#define BOOT_FROM_EEPROM BIT(4) ++#define EEPROM_EN BIT(5) ++ ++ ++//2 AFE_MISC ++#define AFE_BGEN BIT(0) ++#define AFE_MBEN BIT(1) ++#define MAC_ID_EN BIT(7) ++ ++ ++//2 SPS0_CTRL ++ ++ ++//2 SPS_OCP_CFG ++ ++ ++//2 RSV_CTRL ++#define WLOCK_ALL BIT(0) ++#define WLOCK_00 BIT(1) ++#define WLOCK_04 BIT(2) ++#define WLOCK_08 BIT(3) ++#define WLOCK_40 BIT(4) ++#define R_DIS_PRST_0 BIT(5) ++#define R_DIS_PRST_1 BIT(6) ++#define LOCK_ALL_EN BIT(7) ++ ++//2 RF_CTRL ++#define RF_EN BIT(0) ++#define RF_RSTB BIT(1) ++#define RF_SDMRSTB BIT(2) ++ ++ ++ ++//2 LDOA15_CTRL ++#define LDA15_EN BIT(0) ++#define LDA15_STBY BIT(1) ++#define LDA15_OBUF BIT(2) ++#define LDA15_REG_VOS BIT(3) ++#define _LDA15_VOADJ(x) (((x) & 0x7) << 4) ++ ++ ++ ++//2 LDOV12D_CTRL ++#define LDV12_EN BIT(0) ++#define LDV12_SDBY BIT(1) ++#define LPLDO_HSM BIT(2) ++#define LPLDO_LSM_DIS BIT(3) ++#define _LDV12_VADJ(x) (((x) & 0xF) << 4) ++ ++ ++//2 AFE_XTAL_CTRL ++#define XTAL_EN BIT(0) ++#define XTAL_BSEL BIT(1) ++#define _XTAL_BOSC(x) (((x) & 0x3) << 2) ++#define _XTAL_CADJ(x) (((x) & 0xF) << 4) ++#define XTAL_GATE_USB BIT(8) ++#define _XTAL_USB_DRV(x) (((x) & 0x3) << 9) ++#define XTAL_GATE_AFE BIT(11) ++#define _XTAL_AFE_DRV(x) (((x) & 0x3) << 12) ++#define XTAL_RF_GATE BIT(14) ++#define _XTAL_RF_DRV(x) (((x) & 0x3) << 15) ++#define XTAL_GATE_DIG BIT(17) ++#define _XTAL_DIG_DRV(x) (((x) & 0x3) << 18) ++#define XTAL_BT_GATE BIT(20) ++#define _XTAL_BT_DRV(x) (((x) & 0x3) << 21) ++#define _XTAL_GPIO(x) (((x) & 0x7) << 23) ++ ++ ++#define CKDLY_AFE BIT(26) ++#define CKDLY_USB BIT(27) ++#define CKDLY_DIG BIT(28) ++#define CKDLY_BT BIT(29) ++ ++ ++//2 AFE_PLL_CTRL ++#define APLL_EN BIT(0) ++#define APLL_320_EN BIT(1) ++#define APLL_FREF_SEL BIT(2) ++#define APLL_EDGE_SEL BIT(3) ++#define APLL_WDOGB BIT(4) ++#define APLL_LPFEN BIT(5) ++ ++#define APLL_REF_CLK_13MHZ 0x1 ++#define APLL_REF_CLK_19_2MHZ 0x2 ++#define APLL_REF_CLK_20MHZ 0x3 ++#define APLL_REF_CLK_25MHZ 0x4 ++#define APLL_REF_CLK_26MHZ 0x5 ++#define APLL_REF_CLK_38_4MHZ 0x6 ++#define APLL_REF_CLK_40MHZ 0x7 ++ ++#define APLL_320EN BIT(14) ++#define APLL_80EN BIT(15) ++#define APLL_1MEN BIT(24) ++ ++ ++//2 EFUSE_CTRL ++#define ALD_EN BIT(18) ++#define EF_PD BIT(19) ++#define EF_FLAG BIT(31) ++ ++//2 EFUSE_TEST ++#define EF_TRPT BIT(7) ++#define LDOE25_EN BIT(31) ++ ++//2 PWR_DATA ++ ++//2 CAL_TIMER ++ ++//2 ACLK_MON ++#define RSM_EN BIT(0) ++#define Timer_EN BIT(4) ++ ++ ++//2 GPIO_MUXCFG ++#define TRSW0EN BIT(2) ++#define TRSW1EN BIT(3) ++#define EROM_EN BIT(4) ++#define EnBT BIT(5) ++#define EnUart BIT(8) ++#define Uart_910 BIT(9) ++#define EnPMAC BIT(10) ++#define SIC_SWRST BIT(11) ++#define EnSIC BIT(12) ++#define SIC_23 BIT(13) ++#define EnHDP BIT(14) ++#define SIC_LBK BIT(15) ++ ++//2 GPIO_PIN_CTRL ++ ++ ++ ++//2 GPIO_INTM ++ ++//2 LEDCFG ++#define LED0PL BIT(4) ++#define LED1PL BIT(12) ++#define LED0DIS BIT(7) ++ ++#define SECCAM_CLR BIT(30) ++ ++//2 FSIMR ++ ++//2 FSISR ++ ++ ++//2 8051FWDL ++//2 MCUFWDL ++#define MCUFWDL_EN BIT(0) ++#define MCUFWDL_RDY BIT(1) ++#define FWDL_ChkSum_rpt BIT(2) ++#define MACINI_RDY BIT(3) ++#define BBINI_RDY BIT(4) ++#define RFINI_RDY BIT(5) ++#define WINTINI_RDY BIT(6) ++#define MAC1_WINTINI_RDY BIT(11)// 0X81 BIT3 ++#define CPRST BIT(23) ++ ++ ++ ++ ++//2 REG_SYS_CFG ++#define XCLK_VLD BIT(0) ++#define ACLK_VLD BIT(1) ++#define UCLK_VLD BIT(2) ++#define PCLK_VLD BIT(3) ++#define PCIRSTB BIT(4) ++#define V15_VLD BIT(5) ++#define TRP_B15V_EN BIT(7) ++#define SIC_IDLE BIT(8) ++#define BD_MAC2 BIT(9) ++#define BD_MAC1 BIT(10) ++#define IC_MACPHY_MODE BIT(11) ++#define PAD_HWPD_IDN BIT(22) ++#define TRP_VAUX_EN BIT(23) ++#define TRP_BT_EN BIT(24) ++#define BD_PKG_SEL BIT(25) ++#define BD_HCI_SEL BIT(26) ++#define TYPE_ID BIT(27) ++ ++#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15 ++#define CHIP_VER_RTL_SHIFT 12 ++ ++//----------------------------------------------------- ++// ++// 0x0100h ~ 0x01FFh MACTOP General Configuration ++// ++//----------------------------------------------------- ++ ++ ++//2 Function Enable Registers ++//2 CR ++ ++#define REG_LBMODE (REG_CR + 3) ++ ++ ++#define HCI_TXDMA_EN BIT(0) ++#define HCI_RXDMA_EN BIT(1) ++#define TXDMA_EN BIT(2) ++#define RXDMA_EN BIT(3) ++#define PROTOCOL_EN BIT(4) ++#define SCHEDULE_EN BIT(5) ++#define MACTXEN BIT(6) ++#define MACRXEN BIT(7) ++#define ENSWBCN BIT(8) ++#define ENSEC BIT(9) ++ ++// Network type ++#define _NETTYPE(x) (((x) & 0x3) << 16) ++#define MASK_NETTYPE 0x30000 ++#define NT_NO_LINK 0x0 ++#define NT_LINK_AD_HOC 0x1 ++#define NT_LINK_AP 0x2 ++#define NT_AS_AP 0x3 ++ ++#define _LBMODE(x) (((x) & 0xF) << 24) ++#define MASK_LBMODE 0xF000000 ++#define LOOPBACK_NORMAL 0x0 ++#define LOOPBACK_IMMEDIATELY 0xB ++#define LOOPBACK_MAC_DELAY 0x3 ++#define LOOPBACK_PHY 0x1 ++#define LOOPBACK_DMA 0x7 ++ ++ ++//2 PBP - Page Size Register ++#define GET_RX_PAGE_SIZE(value) ((value) & 0xF) ++#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4) ++#define _PSRX_MASK 0xF ++#define _PSTX_MASK 0xF0 ++#define _PSRX(x) (x) ++#define _PSTX(x) ((x) << 4) ++ ++#define PBP_64 0x0 ++#define PBP_128 0x1 ++#define PBP_256 0x2 ++#define PBP_512 0x3 ++#define PBP_1024 0x4 ++ ++ ++//2 TX/RXDMA ++#define RXDMA_ARBBW_EN BIT(0) ++#define RXSHFT_EN BIT(1) ++#define RXDMA_AGG_EN BIT(2) ++#define QS_VO_QUEUE BIT(8) ++#define QS_VI_QUEUE BIT(9) ++#define QS_BE_QUEUE BIT(10) ++#define QS_BK_QUEUE BIT(11) ++#define QS_MANAGER_QUEUE BIT(12) ++#define QS_HIGH_QUEUE BIT(13) ++ ++#define HQSEL_VOQ BIT(0) ++#define HQSEL_VIQ BIT(1) ++#define HQSEL_BEQ BIT(2) ++#define HQSEL_BKQ BIT(3) ++#define HQSEL_MGTQ BIT(4) ++#define HQSEL_HIQ BIT(5) ++ ++// For normal driver, 0x10C ++#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14) ++#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12) ++#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10) ++#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 ) ++#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 ) ++#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 ) ++ ++#define QUEUE_LOW 1 ++#define QUEUE_NORMAL 2 ++#define QUEUE_HIGH 3 ++ ++ ++ ++//2 TRXFF_BNDY ++ ++ ++//2 LLT_INIT ++#define _LLT_NO_ACTIVE 0x0 ++#define _LLT_WRITE_ACCESS 0x1 ++#define _LLT_READ_ACCESS 0x2 ++ ++#define _LLT_INIT_DATA(x) ((x) & 0xFF) ++#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8) ++#define _LLT_OP(x) (((x) & 0x3) << 30) ++#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3) ++ ++ ++//2 BB_ACCESS_CTRL ++#define BB_WRITE_READ_MASK (BIT(31) | BIT(30)) ++#define BB_WRITE_EN BIT(30) ++#define BB_READ_EN BIT(31) ++//#define BB_ADDR_MASK 0xFFF ++//#define _BB_ADDR(x) ((x) & BB_ADDR_MASK) ++ ++//----------------------------------------------------- ++// ++// 0x0200h ~ 0x027Fh TXDMA Configuration ++// ++//----------------------------------------------------- ++//2 RQPN ++#define _HPQ(x) ((x) & 0xFF) ++#define _LPQ(x) (((x) & 0xFF) << 8) ++#define _PUBQ(x) (((x) & 0xFF) << 16) ++#define _NPQ(x) ((x) & 0xFF) // NOTE: in RQPN_NPQ register ++ ++ ++#define HPQ_PUBLIC_DIS BIT(24) ++#define LPQ_PUBLIC_DIS BIT(25) ++#define LD_RQPN BIT(31) ++ ++ ++//2 TDECTRL ++#define BCN_VALID BIT(16) ++#define BCN_HEAD(x) (((x) & 0xFF) << 8) ++#define BCN_HEAD_MASK 0xFF00 ++ ++//2 TDECTL ++#define BLK_DESC_NUM_SHIFT 4 ++#define BLK_DESC_NUM_MASK 0xF ++ ++ ++//2 TXDMA_OFFSET_CHK ++#define DROP_DATA_EN BIT(9) ++ ++//----------------------------------------------------- ++// ++// 0x0400h ~ 0x047Fh Protocol Configuration ++// ++//----------------------------------------------------- ++//2 FWHW_TXQ_CTRL ++#define EN_AMPDU_RTY_NEW BIT(7) ++ ++//2 INIRTSMCS_SEL ++#define _INIRTSMCS_SEL(x) ((x) & 0x3F) ++ ++ ++//2 SPEC SIFS ++#define _SPEC_SIFS_CCK(x) ((x) & 0xFF) ++#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8) ++ ++ ++//2 RRSR ++ ++#define RATE_REG_BITMAP_ALL 0xFFFFF ++ ++#define _RRSC_BITMAP(x) ((x) & 0xFFFFF) ++ ++#define _RRSR_RSC(x) (((x) & 0x3) << 21) ++#define RRSR_RSC_RESERVED 0x0 ++#define RRSR_RSC_UPPER_SUBCHANNEL 0x1 ++#define RRSR_RSC_LOWER_SUBCHANNEL 0x2 ++#define RRSR_RSC_DUPLICATE_MODE 0x3 ++ ++ ++//2 ARFR ++#define USE_SHORT_G1 BIT(20) ++ ++//2 AGGLEN_LMT_L ++#define _AGGLMT_MCS0(x) ((x) & 0xF) ++#define _AGGLMT_MCS1(x) (((x) & 0xF) << 4) ++#define _AGGLMT_MCS2(x) (((x) & 0xF) << 8) ++#define _AGGLMT_MCS3(x) (((x) & 0xF) << 12) ++#define _AGGLMT_MCS4(x) (((x) & 0xF) << 16) ++#define _AGGLMT_MCS5(x) (((x) & 0xF) << 20) ++#define _AGGLMT_MCS6(x) (((x) & 0xF) << 24) ++#define _AGGLMT_MCS7(x) (((x) & 0xF) << 28) ++ ++ ++//2 RL ++#define RETRY_LIMIT_SHORT_SHIFT 8 ++#define RETRY_LIMIT_LONG_SHIFT 0 ++ ++ ++//2 DARFRC ++#define _DARF_RC1(x) ((x) & 0x1F) ++#define _DARF_RC2(x) (((x) & 0x1F) << 8) ++#define _DARF_RC3(x) (((x) & 0x1F) << 16) ++#define _DARF_RC4(x) (((x) & 0x1F) << 24) ++// NOTE: shift starting from address (DARFRC + 4) ++#define _DARF_RC5(x) ((x) & 0x1F) ++#define _DARF_RC6(x) (((x) & 0x1F) << 8) ++#define _DARF_RC7(x) (((x) & 0x1F) << 16) ++#define _DARF_RC8(x) (((x) & 0x1F) << 24) ++ ++ ++//2 RARFRC ++#define _RARF_RC1(x) ((x) & 0x1F) ++#define _RARF_RC2(x) (((x) & 0x1F) << 8) ++#define _RARF_RC3(x) (((x) & 0x1F) << 16) ++#define _RARF_RC4(x) (((x) & 0x1F) << 24) ++// NOTE: shift starting from address (RARFRC + 4) ++#define _RARF_RC5(x) ((x) & 0x1F) ++#define _RARF_RC6(x) (((x) & 0x1F) << 8) ++#define _RARF_RC7(x) (((x) & 0x1F) << 16) ++#define _RARF_RC8(x) (((x) & 0x1F) << 24) ++ ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0500h ~ 0x05FFh EDCA Configuration ++// ++//----------------------------------------------------- ++ ++ ++ ++//2 EDCA setting ++#define AC_PARAM_TXOP_LIMIT_OFFSET 16 ++#define AC_PARAM_ECW_MAX_OFFSET 12 ++#define AC_PARAM_ECW_MIN_OFFSET 8 ++#define AC_PARAM_AIFS_OFFSET 0 ++ ++ ++//2 EDCA_VO_PARAM ++#define _AIFS(x) (x) ++#define _ECW_MAX_MIN(x) ((x) << 8) ++#define _TXOP_LIMIT(x) ((x) << 16) ++ ++ ++#define _BCNIFS(x) ((x) & 0xFF) ++#define _BCNECW(x) (((x) & 0xF))<< 8) ++ ++ ++#define _LRL(x) ((x) & 0x3F) ++#define _SRL(x) (((x) & 0x3F) << 8) ++ ++ ++//2 SIFS_CCK ++#define _SIFS_CCK_CTX(x) ((x) & 0xFF) ++#define _SIFS_CCK_TRX(x) (((x) & 0xFF) << 8); ++ ++ ++//2 SIFS_OFDM ++#define _SIFS_OFDM_CTX(x) ((x) & 0xFF) ++#define _SIFS_OFDM_TRX(x) (((x) & 0xFF) << 8); ++ ++ ++//2 TBTT PROHIBIT ++#define _TBTT_PROHIBIT_HOLD(x) (((x) & 0xFF) << 8) ++ ++ ++//2 REG_RD_CTRL ++#define DIS_EDCA_CNT_DWN BIT(11) ++ ++ ++//2 BCN_CTRL ++#define EN_MBSSID BIT(1) ++#define EN_TXBCN_RPT BIT(2) ++#define EN_BCN_FUNCTION BIT(3) ++// The same function but different bit field. ++#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4) ++#define DIS_TSF_UDT0_TEST_CHIP BIT(5) ++ ++//2 ACMHWCTRL ++#define AcmHw_HwEn BIT(0) ++#define AcmHw_BeqEn BIT(1) ++#define AcmHw_ViqEn BIT(2) ++#define AcmHw_VoqEn BIT(3) ++#define AcmHw_BeqStatus BIT(4) ++#define AcmHw_ViqStatus BIT(5) ++#define AcmHw_VoqStatus BIT(6) ++ ++ ++ ++//----------------------------------------------------- ++// ++// 0x0600h ~ 0x07FFh WMAC Configuration ++// ++//----------------------------------------------------- ++ ++//2 APSD_CTRL ++#define APSDOFF BIT(6) ++#define APSDOFF_STATUS BIT(7) ++ ++ ++//2 BWOPMODE ++#define BW_20MHZ BIT(2) ++//#define BW_OPMODE_20MHZ BIT(2) // For compability ++ ++ ++#define RATE_BITMAP_ALL 0xFFFFF ++ ++// Only use CCK 1M rate for ACK ++#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1 ++#define RATE_RRSR_WITHOUT_CCK 0xFFFF0 ++ ++//2 TCR ++#define TSFRST BIT(0) ++#define DIS_GCLK BIT(1) ++#define PAD_SEL BIT(2) ++#define PWR_ST BIT(6) ++#define PWRBIT_OW_EN BIT(7) ++#define ACRC BIT(8) ++#define CFENDFORM BIT(9) ++#define ICV BIT(10) ++ ++ ++ ++//2 RCR ++#define AAP BIT(0) ++#define APM BIT(1) ++#define AM BIT(2) ++#define AB BIT(3) ++#define ADD3 BIT(4) ++#define APWRMGT BIT(5) ++#define CBSSID BIT(6) ++#define CBSSID_BCN BIT(7) ++#define ACRC32 BIT(8) ++#define AICV BIT(9) ++#define ADF BIT(11) ++#define ACF BIT(12) ++#define AMF BIT(13) ++#define HTC_LOC_CTRL BIT(14) ++#define UC_DATA_EN BIT(16) ++#define BM_DATA_EN BIT(17) ++#define MFBEN BIT(22) ++#define LSIGEN BIT(23) ++#define EnMBID BIT(24) ++#define APP_BASSN BIT(27) ++#define APP_PHYSTS BIT(28) ++#define APP_ICV BIT(29) ++#define APP_MIC BIT(30) ++#define APP_FCS BIT(31) ++ ++//2 RX_PKT_LIMIT ++ ++//2 RX_DLK_TIME ++ ++//2 MBIDCAMCFG ++ ++ ++ ++//2 AMPDU_MIN_SPACE ++#define _MIN_SPACE(x) ((x) & 0x7) ++#define _SHORT_GI_PADDING(x) (((x) & 0x1F) << 3) ++ ++ ++//2 RXERR_RPT ++#define RXERR_TYPE_OFDM_PPDU 0 ++#define RXERR_TYPE_OFDM_FALSE_ALARM 1 ++#define RXERR_TYPE_OFDM_MPDU_OK 2 ++#define RXERR_TYPE_OFDM_MPDU_FAIL 3 ++#define RXERR_TYPE_CCK_PPDU 4 ++#define RXERR_TYPE_CCK_FALSE_ALARM 5 ++#define RXERR_TYPE_CCK_MPDU_OK 6 ++#define RXERR_TYPE_CCK_MPDU_FAIL 7 ++#define RXERR_TYPE_HT_PPDU 8 ++#define RXERR_TYPE_HT_FALSE_ALARM 9 ++#define RXERR_TYPE_HT_MPDU_TOTAL 10 ++#define RXERR_TYPE_HT_MPDU_OK 11 ++#define RXERR_TYPE_HT_MPDU_FAIL 12 ++#define RXERR_TYPE_RX_FULL_DROP 15 ++ ++#define RXERR_COUNTER_MASK 0xFFFFF ++#define RXERR_RPT_RST BIT(27) ++#define _RXERR_RPT_SEL(type) ((type) << 28) ++ ++ ++//2 SECCFG ++#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key ++#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key ++#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption ++#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption ++#define SCR_SKByA2 BIT(4) //Search kEY BY A2 ++#define SCR_NoSKMC BIT(5) //No Key Search Multicast ++#define SCR_TXBCUSEDK BIT(6) // Force Tx Broadcast packets Use Default Key ++#define SCR_RXBCUSEDK BIT(7) // Force Rx Broadcast packets Use Default Key ++ ++//vivi added for new cam search flow, 20091028 ++#ifdef HW_EN_DE_CRYPTION_FOR_NEW_CAM_SEARCH_FLOW ++#define SCR_TxUseBroadcastDK BIT6 //Force Tx Use Broadcast Default Key ++#define SCR_RxUseBroadcastDK BIT7 //Force Rx Use Broadcast Default Key ++#endif ++ ++ ++//----------------------------------------------------- ++// ++// 0xFE00h ~ 0xFE55h USB Configuration ++// ++//----------------------------------------------------- ++ ++//2 USB Information (0xFE17) ++#define USB_IS_HIGH_SPEED 0 ++#define USB_IS_FULL_SPEED 1 ++#define USB_SPEED_MASK BIT(5) ++ ++#define USB_NORMAL_SIE_EP_MASK 0xF ++#define USB_NORMAL_SIE_EP_SHIFT 4 ++ ++#define USB_TEST_EP_MASK 0x30 ++#define USB_TEST_EP_SHIFT 4 ++ ++//2 Special Option ++#define USB_AGG_EN BIT(3) ++ ++ ++//2REG_C2HEVT_CLEAR ++#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message ++#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. ++ ++//2 8192D PartNo. ++#define PARTNO_92D_NIC (BIT7|BIT6) ++#define PARTNO_92D_NIC_REMARK (BIT5|BIT4) ++#define PARTNO_SINGLE_BAND_VS BIT3 ++#define PARTNO_SINGLE_BAND_VS_REMARK BIT1 ++#define PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2) ++#define PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0) ++//======================================================== ++// General definitions ++//======================================================== ++ ++#define MAC_ADDR_LEN 6 ++#define LAST_ENTRY_OF_TX_PKT_BUFFER 255 ++#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC 127 ++ ++#define POLLING_LLT_THRESHOLD 20 ++#define POLLING_READY_TIMEOUT_COUNT 1000 ++ ++// Min Spacing related settings. ++#define MAX_MSS_DENSITY_2T 0x13 ++#define MAX_MSS_DENSITY_1T 0x0A ++// GPIO BIT ++#define HAL_8192C_HW_GPIO_WPS_BIT BIT2 ++ ++ ++#include "basic_types.h" ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_xmit.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_xmit.h +new file mode 100644 +index 000000000000..bc651c1de4f3 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtl8192d_xmit.h +@@ -0,0 +1,144 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL8192D_XMIT_H_ ++#define _RTL8192D_XMIT_H_ ++ ++// ++// Queue Select Value in TxDesc ++// ++#define QSLT_BK 0x2//0x01 ++#define QSLT_BE 0x0 ++#define QSLT_VI 0x5//0x4 ++#define QSLT_VO 0x7//0x6 ++#define QSLT_BEACON 0x10 ++#define QSLT_HIGH 0x11 ++#define QSLT_MGNT 0x12 ++#define QSLT_CMD 0x13 ++ ++//Because we open EM for normal case, we just always insert 2*8 bytes.by wl ++#define USB_92D_DUMMY_OFFSET 2 ++#define USB_92D_DUMMY_LENGTH (USB_92D_DUMMY_OFFSET * PACKET_OFFSET_SZ) ++#define USB_HWDESC_HEADER_LEN (TXDESC_SIZE + USB_92D_DUMMY_LENGTH) ++ ++//For 92D early mode ++#define SET_EARLYMODE_PKTNUM(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 0, 3, __Value) ++#define SET_EARLYMODE_LEN0(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 4, 12, __Value) ++#define SET_EARLYMODE_LEN1(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 16, 12, __Value) ++#define SET_EARLYMODE_LEN2_1(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 28, 4, __Value) ++#define SET_EARLYMODE_LEN2_2(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 0, 8, __Value) ++#define SET_EARLYMODE_LEN3(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 8, 12, __Value) ++#define SET_EARLYMODE_LEN4(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 20, 12, __Value) ++ ++/* Copy from rtl8192c */ ++struct txrpt_ccx_8192d { ++ /* offset 0 */ ++ u8 retry_cnt:6; ++ u8 rsvd_0:2; ++ ++ /* offset 1 */ ++ u8 rts_retry_cnt:6; ++ u8 rsvd_1:2; ++ ++ /* offset 2 */ ++ u8 ccx_qtime0; ++ u8 ccx_qtime1; ++ ++ /* offset 4 */ ++ u8 missed_pkt_num:5; ++ u8 rsvd_4:3; ++ ++ /* offset 5 */ ++ u8 mac_id:5; ++ u8 des1_fragssn:3; ++ ++ /* offset 6 */ ++ u8 rpt_pkt_num:5; ++ u8 pkt_drop:1; ++ u8 lifetime_over:1; ++ u8 retry_over:1; ++ ++ /* offset 7*/ ++ u8 edca_tx_queue:4; ++ u8 rsvd_7:1; ++ u8 bmc:1; ++ u8 pkt_ok:1; ++ u8 int_ccx:1; ++}; ++ ++#define txrpt_ccx_qtime_8192d(txrpt_ccx) ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8)) ++ ++#ifdef CONFIG_XMIT_ACK ++void dump_txrpt_ccx_8192d(void *buf); ++void handle_txrpt_ccx_8192d(_adapter *adapter, void *buf); ++#else ++#define dump_txrpt_ccx_8192d(buf) do {} while(0) ++#define handle_txrpt_ccx_8192d(adapter, buf) do {} while(0) ++#endif ++ ++#ifdef CONFIG_USB_HCI ++ ++#ifdef CONFIG_USB_TX_AGGREGATION ++#define MAX_TX_AGG_PACKET_NUMBER 0xFF ++#endif ++ ++s32 rtl8192du_init_xmit_priv(_adapter * padapter); ++ ++void rtl8192du_free_xmit_priv(_adapter * padapter); ++ ++void rtl8192du_cal_txdesc_chksum(struct tx_desc *ptxdesc); ++ ++s32 rtl8192du_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf); ++ ++s32 rtl8192du_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe); ++ ++s32 rtl8192du_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++s32 rtl8192du_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtl8192du_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt); ++#endif ++ ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++s32 rtl8192de_init_xmit_priv(_adapter * padapter); ++void rtl8192de_free_xmit_priv(_adapter * padapter); ++ ++s32 rtl8192de_enqueue_xmitbuf(struct rtw_tx_ring *ring, struct xmit_buf *pxmitbuf); ++struct xmit_buf *rtl8192de_dequeue_xmitbuf(struct rtw_tx_ring *ring); ++ ++void rtl8192de_xmitframe_resume(_adapter *padapter); ++ ++s32 rtl8192de_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe); ++ ++s32 rtl8192de_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++s32 rtl8192de_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++ ++#ifdef CONFIG_HOSTAPD_MLME ++s32 rtl8192de_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt); ++#endif ++ ++#endif ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_android.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_android.h +new file mode 100644 +index 000000000000..468ae77692b0 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_android.h +@@ -0,0 +1,89 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef __RTW_ANDROID_H__ ++#define __RTW_ANDROID_H__ ++ ++#include ++#include ++ ++enum ANDROID_WIFI_CMD { ++ ANDROID_WIFI_CMD_START, ++ ANDROID_WIFI_CMD_STOP, ++ ANDROID_WIFI_CMD_SCAN_ACTIVE, ++ ANDROID_WIFI_CMD_SCAN_PASSIVE, ++ ANDROID_WIFI_CMD_RSSI, ++ ANDROID_WIFI_CMD_LINKSPEED, ++ ANDROID_WIFI_CMD_RXFILTER_START, ++ ANDROID_WIFI_CMD_RXFILTER_STOP, ++ ANDROID_WIFI_CMD_RXFILTER_ADD, ++ ANDROID_WIFI_CMD_RXFILTER_REMOVE, ++ ANDROID_WIFI_CMD_BTCOEXSCAN_START, ++ ANDROID_WIFI_CMD_BTCOEXSCAN_STOP, ++ ANDROID_WIFI_CMD_BTCOEXMODE, ++ ANDROID_WIFI_CMD_SETSUSPENDOPT, ++ ANDROID_WIFI_CMD_P2P_DEV_ADDR, ++ ANDROID_WIFI_CMD_SETFWPATH, ++ ANDROID_WIFI_CMD_SETBAND, ++ ANDROID_WIFI_CMD_GETBAND, ++ ANDROID_WIFI_CMD_COUNTRY, ++ ANDROID_WIFI_CMD_P2P_SET_NOA, ++ ANDROID_WIFI_CMD_P2P_GET_NOA, ++ ANDROID_WIFI_CMD_P2P_SET_PS, ++ ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE, ++#ifdef PNO_SUPPORT ++ ANDROID_WIFI_CMD_PNOSSIDCLR_SET, ++ ANDROID_WIFI_CMD_PNOSETUP_SET, ++ ANDROID_WIFI_CMD_PNOENABLE_SET, ++ ANDROID_WIFI_CMD_PNODEBUG_SET, ++#endif ++ ++ ANDROID_WIFI_CMD_MACADDR, ++ ++ ANDROID_WIFI_CMD_BLOCK, ++ ++ ANDROID_WIFI_CMD_WFD_ENABLE, ++ ANDROID_WIFI_CMD_WFD_DISABLE, ++ ++ ANDROID_WIFI_CMD_WFD_SET_TCPPORT, ++ ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT, ++ ANDROID_WIFI_CMD_WFD_SET_DEVTYPE, ++ ++ ANDROID_WIFI_CMD_MAX ++}; ++ ++int rtw_android_cmdstr_to_num(char *cmdstr); ++int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd); ++ ++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC) ++int rtw_android_wifictrl_func_add(void); ++void rtw_android_wifictrl_func_del(void); ++void* wl_android_prealloc(int section, unsigned long size); ++ ++int wifi_get_irq_number(unsigned long *irq_flags_ptr); ++int wifi_set_power(int on, unsigned long msec); ++int wifi_get_mac_addr(unsigned char *buf); ++void *wifi_get_country_code(char *ccode); ++#else ++static int rtw_android_wifictrl_func_add(void) { return 0; } ++static void rtw_android_wifictrl_func_del(void) {} ++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */ ++ ++#endif //__RTW_ANDROID_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ap.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ap.h +new file mode 100644 +index 000000000000..12651741fc5f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ap.h +@@ -0,0 +1,63 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_AP_H_ ++#define __RTW_AP_H_ ++ ++#include ++#include ++#include ++ ++ ++#ifdef CONFIG_AP_MODE ++ ++//external function ++extern void rtw_indicate_sta_assoc_event(_adapter *padapter, struct sta_info *psta); ++extern void rtw_indicate_sta_disassoc_event(_adapter *padapter, struct sta_info *psta); ++ ++ ++void init_mlme_ap_info(_adapter *padapter); ++void free_mlme_ap_info(_adapter *padapter); ++//void update_BCNTIM(_adapter *padapter); ++void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *data, u8 len); ++void rtw_remove_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index); ++void update_beacon(_adapter *padapter, u8 ie_id, u8 *oui, u8 tx); ++void expire_timeout_chk(_adapter *padapter); ++void update_sta_info_apmode(_adapter *padapter, struct sta_info *psta); ++int rtw_check_beacon_data(_adapter *padapter, u8 *pbuf, int len); ++void rtw_ap_restore_network(_adapter *padapter); ++void rtw_set_macaddr_acl(_adapter *padapter, int mode); ++int rtw_acl_add_sta(_adapter *padapter, u8 *addr); ++int rtw_acl_remove_sta(_adapter *padapter, u8 *addr); ++ ++#ifdef CONFIG_NATIVEAP_MLME ++void associated_clients_update(_adapter *padapter, u8 updated); ++void bss_cap_update_on_sta_join(_adapter *padapter, struct sta_info *psta); ++u8 bss_cap_update_on_sta_leave(_adapter *padapter, struct sta_info *psta); ++void sta_info_update(_adapter *padapter, struct sta_info *psta); ++void ap_sta_info_defer_update(_adapter *padapter, struct sta_info *psta); ++u8 ap_free_sta(_adapter *padapter, struct sta_info *psta, bool active, u16 reason); ++int rtw_sta_flush(_adapter *padapter); ++int rtw_ap_inform_ch_switch(_adapter *padapter, u8 new_ch, u8 ch_offset); ++void start_ap_mode(_adapter *padapter); ++void stop_ap_mode(_adapter *padapter); ++#endif ++#endif //end of CONFIG_AP_MODE ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_br_ext.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_br_ext.h +new file mode 100644 +index 000000000000..1b5709a57924 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_br_ext.h +@@ -0,0 +1,75 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_BR_EXT_H_ ++#define _RTW_BR_EXT_H_ ++ ++#if 1 // rtw_wifi_driver ++#define CL_IPV6_PASS 1 ++#define MACADDRLEN 6 ++#define _DEBUG_ERR printk ++#define _DEBUG_INFO //printk ++#define DEBUG_WARN printk ++#define DEBUG_INFO //printk ++#define DEBUG_ERR printk ++//#define GET_MY_HWADDR ((GET_MIB(priv))->dot11OperationEntry.hwaddr) ++#define GET_MY_HWADDR(padapter) ((padapter)->eeprompriv.mac_addr) ++#endif // rtw_wifi_driver ++ ++#define NAT25_HASH_BITS 4 ++#define NAT25_HASH_SIZE (1 << NAT25_HASH_BITS) ++#define NAT25_AGEING_TIME 300 ++ ++#ifdef CL_IPV6_PASS ++#define MAX_NETWORK_ADDR_LEN 17 ++#else ++#define MAX_NETWORK_ADDR_LEN 11 ++#endif ++ ++struct nat25_network_db_entry ++{ ++ struct nat25_network_db_entry *next_hash; ++ struct nat25_network_db_entry **pprev_hash; ++ atomic_t use_count; ++ unsigned char macAddr[6]; ++ unsigned long ageing_timer; ++ unsigned char networkAddr[MAX_NETWORK_ADDR_LEN]; ++}; ++ ++enum NAT25_METHOD { ++ NAT25_MIN, ++ NAT25_CHECK, ++ NAT25_INSERT, ++ NAT25_LOOKUP, ++ NAT25_PARSE, ++ NAT25_MAX ++}; ++ ++struct br_ext_info { ++ unsigned int nat25_disable; ++ unsigned int macclone_enable; ++ unsigned int dhcp_bcst_disable; ++ int addPPPoETag; // 1: Add PPPoE relay-SID, 0: disable ++ unsigned char nat25_dmzMac[MACADDRLEN]; ++ unsigned int nat25sc_disable; ++}; ++ ++void nat25_db_cleanup(_adapter *priv); ++ ++#endif // _RTW_BR_EXT_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_byteorder.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_byteorder.h +new file mode 100644 +index 000000000000..757b01d96dbc +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_byteorder.h +@@ -0,0 +1,39 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTL871X_BYTEORDER_H_ ++#define _RTL871X_BYTEORDER_H_ ++ ++#include ++ ++#if defined (CONFIG_LITTLE_ENDIAN) && defined (CONFIG_BIG_ENDIAN) ++#error "Shall be CONFIG_LITTLE_ENDIAN or CONFIG_BIG_ENDIAN, but not both!\n" ++#endif ++ ++#if defined (CONFIG_LITTLE_ENDIAN) ++#ifndef CONFIG_PLATFORM_MSTAR389 ++# include ++#endif ++#elif defined (CONFIG_BIG_ENDIAN) ++# include ++#else ++# error "Must be LITTLE/BIG Endian Host" ++#endif ++ ++#endif /* _RTL871X_BYTEORDER_H_ */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_cmd.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_cmd.h +new file mode 100644 +index 000000000000..525391138e5f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_cmd.h +@@ -0,0 +1,1166 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_CMD_H_ ++#define __RTW_CMD_H_ ++ ++#include ++#include ++#include ++#include ++ ++#define C2H_MEM_SZ (16*1024) ++ ++#ifndef CONFIG_RTL8711FW ++ ++ #include ++ #include // ++ ++ ++ #define FREE_CMDOBJ_SZ 128 ++ ++ #define MAX_CMDSZ 1024 ++ #define MAX_RSPSZ 512 ++ #define MAX_EVTSZ 1024 ++ ++#ifdef PLATFORM_OS_CE ++ #define CMDBUFF_ALIGN_SZ 4 ++#else ++ #define CMDBUFF_ALIGN_SZ 512 ++#endif ++ ++ struct cmd_obj { ++ _adapter *padapter; ++ u16 cmdcode; ++ u8 res; ++ u8 *parmbuf; ++ u32 cmdsz; ++ u8 *rsp; ++ u32 rspsz; ++ //_sema cmd_sem; ++ _list list; ++ }; ++ ++ struct cmd_priv { ++ _sema cmd_queue_sema; ++ //_sema cmd_done_sema; ++ _sema terminate_cmdthread_sema; ++ _queue cmd_queue; ++ u8 cmd_seq; ++ u8 *cmd_buf; //shall be non-paged, and 4 bytes aligned ++ u8 *cmd_allocated_buf; ++ u8 *rsp_buf; //shall be non-paged, and 4 bytes aligned ++ u8 *rsp_allocated_buf; ++ u32 cmd_issued_cnt; ++ u32 cmd_done_cnt; ++ u32 rsp_cnt; ++ u8 cmdthd_running; ++ u8 stop_req; ++ _adapter *padapter; ++ }; ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++ struct evt_obj { ++ u16 evtcode; ++ u8 res; ++ u8 *parmbuf; ++ u32 evtsz; ++ _list list; ++ }; ++#endif ++ ++ struct evt_priv { ++#ifdef CONFIG_EVENT_THREAD_MODE ++ _sema evt_notify; ++ _sema terminate_evtthread_sema; ++ _queue evt_queue; ++#endif ++ ++//#define CONFIG_C2H_WK ++#ifdef CONFIG_C2H_WK ++ _workitem c2h_wk; ++ bool c2h_wk_alive; ++ struct rtw_cbuf *c2h_queue; ++ #define C2H_QUEUE_MAX_LEN 10 ++#endif ++ ++#ifdef CONFIG_H2CLBK ++ _sema lbkevt_done; ++ u8 lbkevt_limit; ++ u8 lbkevt_num; ++ u8 *cmdevt_parm; ++#endif ++ ATOMIC_T event_seq; ++ u8 *evt_buf; //shall be non-paged, and 4 bytes aligned ++ u8 *evt_allocated_buf; ++ u32 evt_done_cnt; ++#ifdef CONFIG_SDIO_HCI ++ u8 *c2h_mem; ++ u8 *allocated_c2h_mem; ++#ifdef PLATFORM_OS_XP ++ PMDL pc2h_mdl; ++#endif ++#endif ++ ++ }; ++ ++#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \ ++do {\ ++ _rtw_init_listhead(&pcmd->list);\ ++ pcmd->cmdcode = code;\ ++ pcmd->parmbuf = (u8 *)(pparm);\ ++ pcmd->cmdsz = sizeof (*pparm);\ ++ pcmd->rsp = NULL;\ ++ pcmd->rspsz = 0;\ ++} while(0) ++ ++struct c2h_evt_hdr { ++ u8 id:4; ++ u8 plen:4; ++ u8 seq; ++ u8 payload[0]; ++}; ++ ++#define c2h_evt_exist(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen) ++ ++extern u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); ++extern struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv); ++extern void rtw_free_cmd_obj(struct cmd_obj *pcmd); ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++extern u32 rtw_enqueue_evt(struct evt_priv *pevtpriv, struct evt_obj *obj); ++extern struct evt_obj *rtw_dequeue_evt(_queue *queue); ++extern void rtw_free_evt_obj(struct evt_obj *pcmd); ++#endif ++ ++void rtw_stop_cmd_thread(_adapter *adapter); ++thread_return rtw_cmd_thread(thread_context context); ++ ++extern u32 rtw_init_cmd_priv (struct cmd_priv *pcmdpriv); ++extern void rtw_free_cmd_priv (struct cmd_priv *pcmdpriv); ++ ++extern u32 rtw_init_evt_priv (struct evt_priv *pevtpriv); ++extern void rtw_free_evt_priv (struct evt_priv *pevtpriv); ++extern void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv); ++extern void rtw_evt_notify_isr(struct evt_priv *pevtpriv); ++#ifdef CONFIG_P2P ++u8 p2p_protocol_wk_cmd(_adapter*padapter, int intCmdType ); ++#endif //CONFIG_P2P ++ ++#else ++ #include ++#endif /* CONFIG_RTL8711FW */ ++ ++enum rtw_drvextra_cmd_id ++{ ++ NONE_WK_CID, ++ DYNAMIC_CHK_WK_CID, ++ DM_CTRL_WK_CID, ++ PBC_POLLING_WK_CID, ++ POWER_SAVING_CTRL_WK_CID,//IPS,AUTOSuspend ++ LPS_CTRL_WK_CID, ++ ANT_SELECT_WK_CID, ++ P2P_PS_WK_CID, ++ P2P_PROTO_WK_CID, ++ CHECK_HIQ_WK_CID,//for softap mode, check hi queue if empty ++ INTEl_WIDI_WK_CID, ++ C2H_WK_CID, ++ RESET_SECURITYPRIV, // add for CONFIG_IEEE80211W, none 11w also can use ++ FREE_ASSOC_RESOURCES, // add for CONFIG_IEEE80211W, none 11w also can use ++ MAX_WK_CID ++}; ++ ++enum LPS_CTRL_TYPE ++{ ++ LPS_CTRL_SCAN=0, ++ LPS_CTRL_JOINBSS=1, ++ LPS_CTRL_CONNECT=2, ++ LPS_CTRL_DISCONNECT=3, ++ LPS_CTRL_SPECIAL_PACKET=4, ++}; ++ ++enum RFINTFS { ++ SWSI, ++ HWSI, ++ HWPI, ++}; ++ ++/* ++Caller Mode: Infra, Ad-HoC(C) ++ ++Notes: To enter USB suspend mode ++ ++Command Mode ++ ++*/ ++struct usb_suspend_parm { ++ u32 action;// 1: sleep, 0:resume ++}; ++ ++/* ++Caller Mode: Infra, Ad-HoC ++ ++Notes: To join a known BSS. ++ ++Command-Event Mode ++ ++*/ ++ ++/* ++Caller Mode: Infra, Ad-Hoc ++ ++Notes: To join the specified bss ++ ++Command Event Mode ++ ++*/ ++struct joinbss_parm { ++ WLAN_BSSID_EX network; ++}; ++ ++/* ++Caller Mode: Infra, Ad-HoC(C) ++ ++Notes: To disconnect the current associated BSS ++ ++Command Mode ++ ++*/ ++struct disconnect_parm { ++ u32 deauth_timeout_ms; ++}; ++ ++/* ++Caller Mode: AP, Ad-HoC(M) ++ ++Notes: To create a BSS ++ ++Command Mode ++*/ ++struct createbss_parm { ++ WLAN_BSSID_EX network; ++}; ++ ++/* ++Caller Mode: AP, Ad-HoC, Infra ++ ++Notes: To set the NIC mode of RTL8711 ++ ++Command Mode ++ ++The definition of mode: ++ ++#define IW_MODE_AUTO 0 // Let the driver decides which AP to join ++#define IW_MODE_ADHOC 1 // Single cell network (Ad-Hoc Clients) ++#define IW_MODE_INFRA 2 // Multi cell network, roaming, .. ++#define IW_MODE_MASTER 3 // Synchronisation master or Access Point ++#define IW_MODE_REPEAT 4 // Wireless Repeater (forwarder) ++#define IW_MODE_SECOND 5 // Secondary master/repeater (backup) ++#define IW_MODE_MONITOR 6 // Passive monitor (listen only) ++ ++*/ ++struct setopmode_parm { ++ u8 mode; ++ u8 rsvd[3]; ++}; ++ ++/* ++Caller Mode: AP, Ad-HoC, Infra ++ ++Notes: To ask RTL8711 performing site-survey ++ ++Command-Event Mode ++ ++*/ ++ ++#define RTW_SSID_SCAN_AMOUNT 9 // for WEXT_CSCAN_AMOUNT 9 ++#define RTW_CHANNEL_SCAN_AMOUNT (14+37) ++struct sitesurvey_parm { ++ sint scan_mode; //active: 1, passive: 0 ++ /* sint bsslimit; // 1 ~ 48 */ ++ u8 ssid_num; ++ u8 ch_num; ++ NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT]; ++ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT]; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To set the auth type of RTL8711. open/shared/802.1x ++ ++Command Mode ++ ++*/ ++struct setauth_parm { ++ u8 mode; //0: legacy open, 1: legacy shared 2: 802.1x ++ u8 _1x; //0: PSK, 1: TLS ++ u8 rsvd[2]; ++}; ++ ++/* ++Caller Mode: Infra ++ ++a. algorithm: wep40, wep104, tkip & aes ++b. keytype: grp key/unicast key ++c. key contents ++ ++when shared key ==> keyid is the camid ++when 802.1x ==> keyid [0:1] ==> grp key ++when 802.1x ==> keyid > 2 ==> unicast key ++ ++*/ ++struct setkey_parm { ++ u8 algorithm; // encryption algorithm, could be none, wep40, TKIP, CCMP, wep104 ++ u8 keyid; ++ u8 grpkey; // 1: this is the grpkey for 802.1x. 0: this is the unicast key for 802.1x ++ u8 set_tx; // 1: main tx key for wep. 0: other key. ++ u8 key[16]; // this could be 40 or 104 ++}; ++ ++/* ++When in AP or Ad-Hoc mode, this is used to ++allocate an sw/hw entry for a newly associated sta. ++ ++Command ++ ++when shared key ==> algorithm/keyid ++ ++*/ ++struct set_stakey_parm { ++ u8 addr[ETH_ALEN]; ++ u8 algorithm; ++ u8 id;// currently for erasing cam entry if algorithm == _NO_PRIVACY_ ++ u8 key[16]; ++}; ++ ++struct set_stakey_rsp { ++ u8 addr[ETH_ALEN]; ++ u8 keyid; ++ u8 rsvd; ++}; ++ ++/* ++Caller Ad-Hoc/AP ++ ++Command -Rsp(AID == CAMID) mode ++ ++This is to force fw to add an sta_data entry per driver's request. ++ ++FW will write an cam entry associated with it. ++ ++*/ ++struct set_assocsta_parm { ++ u8 addr[ETH_ALEN]; ++}; ++ ++struct set_assocsta_rsp { ++ u8 cam_id; ++ u8 rsvd[3]; ++}; ++ ++/* ++ Caller Ad-Hoc/AP ++ ++ Command mode ++ ++ This is to force fw to del an sta_data entry per driver's request ++ ++ FW will invalidate the cam entry associated with it. ++ ++*/ ++struct del_assocsta_parm { ++ u8 addr[ETH_ALEN]; ++}; ++ ++/* ++Caller Mode: AP/Ad-HoC(M) ++ ++Notes: To notify fw that given staid has changed its power state ++ ++Command Mode ++ ++*/ ++struct setstapwrstate_parm { ++ u8 staid; ++ u8 status; ++ u8 hwaddr[6]; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To setup the basic rate of RTL8711 ++ ++Command Mode ++ ++*/ ++struct setbasicrate_parm { ++ u8 basicrates[NumRates]; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To read the current basic rate ++ ++Command-Rsp Mode ++ ++*/ ++struct getbasicrate_parm { ++ u32 rsvd; ++}; ++ ++struct getbasicrate_rsp { ++ u8 basicrates[NumRates]; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To setup the data rate of RTL8711 ++ ++Command Mode ++ ++*/ ++struct setdatarate_parm { ++#ifdef MP_FIRMWARE_OFFLOAD ++ u32 curr_rateidx; ++#else ++ u8 mac_id; ++ u8 datarates[NumRates]; ++#endif ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To read the current data rate ++ ++Command-Rsp Mode ++ ++*/ ++struct getdatarate_parm { ++ u32 rsvd; ++ ++}; ++struct getdatarate_rsp { ++ u8 datarates[NumRates]; ++}; ++ ++ ++/* ++Caller Mode: Any ++AP: AP can use the info for the contents of beacon frame ++Infra: STA can use the info when sitesurveying ++Ad-HoC(M): Like AP ++Ad-HoC(C): Like STA ++ ++ ++Notes: To set the phy capability of the NIC ++ ++Command Mode ++ ++*/ ++ ++struct setphyinfo_parm { ++ struct regulatory_class class_sets[NUM_REGULATORYS]; ++ u8 status; ++}; ++ ++struct getphyinfo_parm { ++ u32 rsvd; ++}; ++ ++struct getphyinfo_rsp { ++ struct regulatory_class class_sets[NUM_REGULATORYS]; ++ u8 status; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To set the channel/modem/band ++This command will be used when channel/modem/band is changed. ++ ++Command Mode ++ ++*/ ++struct setphy_parm { ++ u8 rfchannel; ++ u8 modem; ++}; ++ ++/* ++Caller Mode: Any ++ ++Notes: To get the current setting of channel/modem/band ++ ++Command-Rsp Mode ++ ++*/ ++struct getphy_parm { ++ u32 rsvd; ++ ++}; ++struct getphy_rsp { ++ u8 rfchannel; ++ u8 modem; ++}; ++ ++struct readBB_parm { ++ u8 offset; ++}; ++struct readBB_rsp { ++ u8 value; ++}; ++ ++struct readTSSI_parm { ++ u8 offset; ++}; ++struct readTSSI_rsp { ++ u8 value; ++}; ++ ++struct writeBB_parm { ++ u8 offset; ++ u8 value; ++}; ++ ++struct readRF_parm { ++ u8 offset; ++}; ++struct readRF_rsp { ++ u32 value; ++}; ++ ++struct writeRF_parm { ++ u32 offset; ++ u32 value; ++}; ++ ++struct getrfintfs_parm { ++ u8 rfintfs; ++}; ++ ++ ++struct Tx_Beacon_param ++{ ++ WLAN_BSSID_EX network; ++}; ++ ++/* ++ Notes: This command is used for H2C/C2H loopback testing ++ ++ mac[0] == 0 ++ ==> CMD mode, return H2C_SUCCESS. ++ The following condition must be ture under CMD mode ++ mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; ++ s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; ++ s2 == (b1 << 8 | b0); ++ ++ mac[0] == 1 ++ ==> CMD_RSP mode, return H2C_SUCCESS_RSP ++ ++ The rsp layout shall be: ++ rsp: parm: ++ mac[0] = mac[5]; ++ mac[1] = mac[4]; ++ mac[2] = mac[3]; ++ mac[3] = mac[2]; ++ mac[4] = mac[1]; ++ mac[5] = mac[0]; ++ s0 = s1; ++ s1 = swap16(s0); ++ w0 = swap32(w1); ++ b0 = b1 ++ s2 = s0 + s1 ++ b1 = b0 ++ w1 = w0 ++ ++ mac[0] == 2 ++ ==> CMD_EVENT mode, return H2C_SUCCESS ++ The event layout shall be: ++ event: parm: ++ mac[0] = mac[5]; ++ mac[1] = mac[4]; ++ mac[2] = event's sequence number, starting from 1 to parm's marc[3] ++ mac[3] = mac[2]; ++ mac[4] = mac[1]; ++ mac[5] = mac[0]; ++ s0 = swap16(s0) - event.mac[2]; ++ s1 = s1 + event.mac[2]; ++ w0 = swap32(w0); ++ b0 = b1 ++ s2 = s0 + event.mac[2] ++ b1 = b0 ++ w1 = swap32(w1) - event.mac[2]; ++ ++ parm->mac[3] is the total event counts that host requested. ++ ++ ++ event will be the same with the cmd's param. ++ ++*/ ++ ++#ifdef CONFIG_H2CLBK ++ ++struct seth2clbk_parm { ++ u8 mac[6]; ++ u16 s0; ++ u16 s1; ++ u32 w0; ++ u8 b0; ++ u16 s2; ++ u8 b1; ++ u32 w1; ++}; ++ ++struct geth2clbk_parm { ++ u32 rsv; ++}; ++ ++struct geth2clbk_rsp { ++ u8 mac[6]; ++ u16 s0; ++ u16 s1; ++ u32 w0; ++ u8 b0; ++ u16 s2; ++ u8 b1; ++ u32 w1; ++}; ++ ++#endif /* CONFIG_H2CLBK */ ++ ++// CMD param Formart for driver extra cmd handler ++struct drvextra_cmd_parm { ++ int ec_id; //extra cmd id ++ int type_size; // Can use this field as the type id or command size ++ unsigned char *pbuf; ++}; ++ ++/*------------------- Below are used for RF/BB tunning ---------------------*/ ++ ++struct setantenna_parm { ++ u8 tx_antset; ++ u8 rx_antset; ++ u8 tx_antenna; ++ u8 rx_antenna; ++}; ++ ++struct enrateadaptive_parm { ++ u32 en; ++}; ++ ++struct settxagctbl_parm { ++ u32 txagc[MAX_RATES_LENGTH]; ++}; ++ ++struct gettxagctbl_parm { ++ u32 rsvd; ++}; ++struct gettxagctbl_rsp { ++ u32 txagc[MAX_RATES_LENGTH]; ++}; ++ ++struct setagcctrl_parm { ++ u32 agcctrl; // 0: pure hw, 1: fw ++}; ++ ++ ++struct setssup_parm { ++ u32 ss_ForceUp[MAX_RATES_LENGTH]; ++}; ++ ++struct getssup_parm { ++ u32 rsvd; ++}; ++struct getssup_rsp { ++ u8 ss_ForceUp[MAX_RATES_LENGTH]; ++}; ++ ++ ++struct setssdlevel_parm { ++ u8 ss_DLevel[MAX_RATES_LENGTH]; ++}; ++ ++struct getssdlevel_parm { ++ u32 rsvd; ++}; ++struct getssdlevel_rsp { ++ u8 ss_DLevel[MAX_RATES_LENGTH]; ++}; ++ ++struct setssulevel_parm { ++ u8 ss_ULevel[MAX_RATES_LENGTH]; ++}; ++ ++struct getssulevel_parm { ++ u32 rsvd; ++}; ++struct getssulevel_rsp { ++ u8 ss_ULevel[MAX_RATES_LENGTH]; ++}; ++ ++ ++struct setcountjudge_parm { ++ u8 count_judge[MAX_RATES_LENGTH]; ++}; ++ ++struct getcountjudge_parm { ++ u32 rsvd; ++}; ++struct getcountjudge_rsp { ++ u8 count_judge[MAX_RATES_LENGTH]; ++}; ++ ++ ++struct setratable_parm { ++ u8 ss_ForceUp[NumRates]; ++ u8 ss_ULevel[NumRates]; ++ u8 ss_DLevel[NumRates]; ++ u8 count_judge[NumRates]; ++}; ++ ++struct getratable_parm { ++ uint rsvd; ++}; ++struct getratable_rsp { ++ u8 ss_ForceUp[NumRates]; ++ u8 ss_ULevel[NumRates]; ++ u8 ss_DLevel[NumRates]; ++ u8 count_judge[NumRates]; ++}; ++ ++ ++//to get TX,RX retry count ++struct gettxretrycnt_parm{ ++ unsigned int rsvd; ++}; ++struct gettxretrycnt_rsp{ ++ unsigned long tx_retrycnt; ++}; ++ ++struct getrxretrycnt_parm{ ++ unsigned int rsvd; ++}; ++struct getrxretrycnt_rsp{ ++ unsigned long rx_retrycnt; ++}; ++ ++//to get BCNOK,BCNERR count ++struct getbcnokcnt_parm{ ++ unsigned int rsvd; ++}; ++struct getbcnokcnt_rsp{ ++ unsigned long bcnokcnt; ++}; ++ ++struct getbcnerrcnt_parm{ ++ unsigned int rsvd; ++}; ++struct getbcnerrcnt_rsp{ ++ unsigned long bcnerrcnt; ++}; ++ ++// to get current TX power level ++struct getcurtxpwrlevel_parm{ ++ unsigned int rsvd; ++}; ++struct getcurtxpwrlevel_rsp{ ++ unsigned short tx_power; ++}; ++ ++struct setprobereqextraie_parm { ++ unsigned char e_id; ++ unsigned char ie_len; ++ unsigned char ie[0]; ++}; ++ ++struct setassocreqextraie_parm { ++ unsigned char e_id; ++ unsigned char ie_len; ++ unsigned char ie[0]; ++}; ++ ++struct setproberspextraie_parm { ++ unsigned char e_id; ++ unsigned char ie_len; ++ unsigned char ie[0]; ++}; ++ ++struct setassocrspextraie_parm { ++ unsigned char e_id; ++ unsigned char ie_len; ++ unsigned char ie[0]; ++}; ++ ++ ++struct addBaReq_parm ++{ ++ unsigned int tid; ++ u8 addr[ETH_ALEN]; ++}; ++ ++/*H2C Handler index: 46 */ ++struct set_ch_parm { ++ u8 ch; ++ u8 bw; ++ u8 ch_offset; ++}; ++ ++#ifdef MP_FIRMWARE_OFFLOAD ++/*H2C Handler index: 47 */ ++struct SetTxPower_parm ++{ ++ u8 TxPower; ++}; ++ ++/*H2C Handler index: 48 */ ++struct SwitchAntenna_parm ++{ ++ u16 antenna_tx; ++ u16 antenna_rx; ++// R_ANTENNA_SELECT_CCK cck_txrx; ++ u8 cck_txrx; ++}; ++ ++/*H2C Handler index: 49 */ ++struct SetCrystalCap_parm ++{ ++ u32 curr_crystalcap; ++}; ++ ++/*H2C Handler index: 50 */ ++struct SetSingleCarrierTx_parm ++{ ++ u8 bStart; ++}; ++ ++/*H2C Handler index: 51 */ ++struct SetSingleToneTx_parm ++{ ++ u8 bStart; ++ u8 curr_rfpath; ++}; ++ ++/*H2C Handler index: 52 */ ++struct SetCarrierSuppressionTx_parm ++{ ++ u8 bStart; ++ u32 curr_rateidx; ++}; ++ ++/*H2C Handler index: 53 */ ++struct SetContinuousTx_parm ++{ ++ u8 bStart; ++ u8 CCK_flag; /*1:CCK 2:OFDM*/ ++ u32 curr_rateidx; ++}; ++ ++/*H2C Handler index: 54 */ ++struct SwitchBandwidth_parm ++{ ++ u8 curr_bandwidth; ++}; ++ ++#endif /* MP_FIRMWARE_OFFLOAD */ ++ ++/*H2C Handler index: 59 */ ++struct SetChannelPlan_param ++{ ++ u8 channel_plan; ++}; ++ ++/*H2C Handler index: 60 */ ++struct LedBlink_param ++{ ++ PLED_871x pLed; ++}; ++ ++/*H2C Handler index: 61 */ ++struct SetChannelSwitch_param ++{ ++ u8 new_ch_no; ++}; ++ ++/*H2C Handler index: 62 */ ++struct TDLSoption_param ++{ ++ u8 addr[ETH_ALEN]; ++ u8 option; ++}; ++ ++#define GEN_CMD_CODE(cmd) cmd ## _CMD_ ++ ++ ++/* ++ ++Result: ++0x00: success ++0x01: sucess, and check Response. ++0x02: cmd ignored due to duplicated sequcne number ++0x03: cmd dropped due to invalid cmd code ++0x04: reserved. ++ ++*/ ++ ++#define H2C_RSP_OFFSET 512 ++ ++#define H2C_SUCCESS 0x00 ++#define H2C_SUCCESS_RSP 0x01 ++#define H2C_DUPLICATED 0x02 ++#define H2C_DROPPED 0x03 ++#define H2C_PARAMETERS_ERROR 0x04 ++#define H2C_REJECTED 0x05 ++#define H2C_CMD_OVERFLOW 0x06 ++#define H2C_RESERVED 0x07 ++ ++extern u8 rtw_setassocsta_cmd(_adapter *padapter, u8 *mac_addr); ++extern u8 rtw_setstandby_cmd(_adapter *padapter, uint action); ++u8 rtw_sitesurvey_cmd(_adapter *padapter, NDIS_802_11_SSID *ssid, int ssid_num, struct rtw_ieee80211_channel *ch, int ch_num); ++extern u8 rtw_createbss_cmd(_adapter *padapter); ++extern u8 rtw_createbss_cmd_ex(_adapter *padapter, unsigned char *pbss, unsigned int sz); ++extern u8 rtw_setphy_cmd(_adapter *padapter, u8 modem, u8 ch); ++extern u8 rtw_setstakey_cmd(_adapter *padapter, u8 *psta, u8 unicast_key); ++extern u8 rtw_clearstakey_cmd(_adapter *padapter, u8 *psta, u8 entry, u8 enqueue); ++extern u8 rtw_joinbss_cmd(_adapter *padapter, struct wlan_network* pnetwork); ++u8 rtw_disassoc_cmd(_adapter *padapter, u32 deauth_timeout_ms, bool enqueue); ++extern u8 rtw_setopmode_cmd(_adapter *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype); ++extern u8 rtw_setdatarate_cmd(_adapter *padapter, u8 *rateset); ++extern u8 rtw_setbasicrate_cmd(_adapter *padapter, u8 *rateset); ++extern u8 rtw_setbbreg_cmd(_adapter * padapter, u8 offset, u8 val); ++extern u8 rtw_setrfreg_cmd(_adapter * padapter, u8 offset, u32 val); ++extern u8 rtw_getbbreg_cmd(_adapter * padapter, u8 offset, u8 * pval); ++extern u8 rtw_getrfreg_cmd(_adapter * padapter, u8 offset, u8 * pval); ++extern u8 rtw_setrfintfs_cmd(_adapter *padapter, u8 mode); ++extern u8 rtw_setrttbl_cmd(_adapter *padapter, struct setratable_parm *prate_table); ++extern u8 rtw_getrttbl_cmd(_adapter *padapter, struct getratable_rsp *pval); ++ ++extern u8 rtw_gettssi_cmd(_adapter *padapter, u8 offset,u8 *pval); ++extern u8 rtw_setfwdig_cmd(_adapter*padapter, u8 type); ++extern u8 rtw_setfwra_cmd(_adapter*padapter, u8 type); ++ ++extern u8 rtw_addbareq_cmd(_adapter*padapter, u8 tid, u8 *addr); ++// add for CONFIG_IEEE80211W, none 11w also can use ++extern u8 rtw_reset_securitypriv_cmd(_adapter*padapter); ++extern u8 rtw_free_assoc_resources_cmd(_adapter *padapter); ++extern u8 rtw_dynamic_chk_wk_cmd(_adapter *adapter); ++ ++u8 rtw_lps_ctrl_wk_cmd(_adapter*padapter, u8 lps_ctrl_type, u8 enqueue); ++ ++#ifdef CONFIG_ANTENNA_DIVERSITY ++extern u8 rtw_antenna_select_cmd(_adapter*padapter, u8 antenna,u8 enqueue); ++#endif ++ ++extern u8 rtw_ps_cmd(_adapter*padapter); ++ ++ ++#ifdef CONFIG_AP_MODE ++u8 rtw_chk_hi_queue_cmd(_adapter*padapter); ++#endif ++ ++u8 rtw_set_ch_cmd(_adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue); ++extern u8 rtw_set_chplan_cmd(_adapter*padapter, u8 chplan, u8 enqueue); ++extern u8 rtw_led_blink_cmd(_adapter*padapter, PLED_871x pLed); ++extern u8 rtw_set_csa_cmd(_adapter*padapter, u8 new_ch_no); ++extern u8 rtw_tdls_cmd(_adapter*padapter, u8 *addr, u8 option); ++ ++extern u8 rtw_c2h_wk_cmd(PADAPTER padapter, u8 *c2h_evt); ++ ++u8 rtw_drvextra_cmd_hdl(_adapter *padapter, unsigned char *pbuf); ++ ++extern void rtw_survey_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_disassoc_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_joinbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_createbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_getbbrfreg_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_readtssi_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd); ++ ++extern void rtw_setstaKey_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_setassocsta_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd); ++extern void rtw_getrttbl_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd); ++ ++ ++struct _cmd_callback { ++ u32 cmd_code; ++ void (*callback)(_adapter *padapter, struct cmd_obj *cmd); ++}; ++ ++enum rtw_h2c_cmd ++{ ++ GEN_CMD_CODE(_Read_MACREG) , /*0*/ ++ GEN_CMD_CODE(_Write_MACREG) , ++ GEN_CMD_CODE(_Read_BBREG) , ++ GEN_CMD_CODE(_Write_BBREG) , ++ GEN_CMD_CODE(_Read_RFREG) , ++ GEN_CMD_CODE(_Write_RFREG) , /*5*/ ++ GEN_CMD_CODE(_Read_EEPROM) , ++ GEN_CMD_CODE(_Write_EEPROM) , ++ GEN_CMD_CODE(_Read_EFUSE) , ++ GEN_CMD_CODE(_Write_EFUSE) , ++ ++ GEN_CMD_CODE(_Read_CAM) , /*10*/ ++ GEN_CMD_CODE(_Write_CAM) , ++ GEN_CMD_CODE(_setBCNITV), ++ GEN_CMD_CODE(_setMBIDCFG), ++ GEN_CMD_CODE(_JoinBss), /*14*/ ++ GEN_CMD_CODE(_DisConnect) , /*15*/ ++ GEN_CMD_CODE(_CreateBss) , ++ GEN_CMD_CODE(_SetOpMode) , ++ GEN_CMD_CODE(_SiteSurvey), /*18*/ ++ GEN_CMD_CODE(_SetAuth) , ++ ++ GEN_CMD_CODE(_SetKey) , /*20*/ ++ GEN_CMD_CODE(_SetStaKey) , ++ GEN_CMD_CODE(_SetAssocSta) , ++ GEN_CMD_CODE(_DelAssocSta) , ++ GEN_CMD_CODE(_SetStaPwrState) , ++ GEN_CMD_CODE(_SetBasicRate) , /*25*/ ++ GEN_CMD_CODE(_GetBasicRate) , ++ GEN_CMD_CODE(_SetDataRate) , ++ GEN_CMD_CODE(_GetDataRate) , ++ GEN_CMD_CODE(_SetPhyInfo) , ++ ++ GEN_CMD_CODE(_GetPhyInfo) , /*30*/ ++ GEN_CMD_CODE(_SetPhy) , ++ GEN_CMD_CODE(_GetPhy) , ++ GEN_CMD_CODE(_readRssi) , ++ GEN_CMD_CODE(_readGain) , ++ GEN_CMD_CODE(_SetAtim) , /*35*/ ++ GEN_CMD_CODE(_SetPwrMode) , ++ GEN_CMD_CODE(_JoinbssRpt), ++ GEN_CMD_CODE(_SetRaTable) , ++ GEN_CMD_CODE(_GetRaTable) , ++ ++ GEN_CMD_CODE(_GetCCXReport), /*40*/ ++ GEN_CMD_CODE(_GetDTMReport), ++ GEN_CMD_CODE(_GetTXRateStatistics), ++ GEN_CMD_CODE(_SetUsbSuspend), ++ GEN_CMD_CODE(_SetH2cLbk), ++ GEN_CMD_CODE(_AddBAReq) , /*45*/ ++ GEN_CMD_CODE(_SetChannel), /*46*/ ++ GEN_CMD_CODE(_SetTxPower), ++ GEN_CMD_CODE(_SwitchAntenna), ++ GEN_CMD_CODE(_SetCrystalCap), ++ GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/ ++ ++ GEN_CMD_CODE(_SetSingleToneTx),/*51*/ ++ GEN_CMD_CODE(_SetCarrierSuppressionTx), ++ GEN_CMD_CODE(_SetContinuousTx), ++ GEN_CMD_CODE(_SwitchBandwidth), /*54*/ ++ GEN_CMD_CODE(_TX_Beacon), /*55*/ ++ ++ GEN_CMD_CODE(_Set_MLME_EVT), /*56*/ ++ GEN_CMD_CODE(_Set_Drv_Extra), /*57*/ ++ GEN_CMD_CODE(_Set_H2C_MSG), /*58*/ ++ ++ GEN_CMD_CODE(_SetChannelPlan), /*59*/ ++ GEN_CMD_CODE(_LedBlink), /*60*/ ++ ++ GEN_CMD_CODE(_SetChannelSwitch), /*61*/ ++ GEN_CMD_CODE(_TDLS), /*62*/ ++ ++ MAX_H2CCMD ++}; ++ ++#define _GetBBReg_CMD_ _Read_BBREG_CMD_ ++#define _SetBBReg_CMD_ _Write_BBREG_CMD_ ++#define _GetRFReg_CMD_ _Read_RFREG_CMD_ ++#define _SetRFReg_CMD_ _Write_RFREG_CMD_ ++ ++#ifdef _RTW_CMD_C_ ++struct _cmd_callback rtw_cmd_callback[] = ++{ ++ {GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/ ++ {GEN_CMD_CODE(_Write_MACREG), NULL}, ++ {GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback}, ++ {GEN_CMD_CODE(_Write_BBREG), NULL}, ++ {GEN_CMD_CODE(_Read_RFREG), &rtw_getbbrfreg_cmdrsp_callback}, ++ {GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/ ++ {GEN_CMD_CODE(_Read_EEPROM), NULL}, ++ {GEN_CMD_CODE(_Write_EEPROM), NULL}, ++ {GEN_CMD_CODE(_Read_EFUSE), NULL}, ++ {GEN_CMD_CODE(_Write_EFUSE), NULL}, ++ ++ {GEN_CMD_CODE(_Read_CAM), NULL}, /*10*/ ++ {GEN_CMD_CODE(_Write_CAM), NULL}, ++ {GEN_CMD_CODE(_setBCNITV), NULL}, ++ {GEN_CMD_CODE(_setMBIDCFG), NULL}, ++ {GEN_CMD_CODE(_JoinBss), &rtw_joinbss_cmd_callback}, /*14*/ ++ {GEN_CMD_CODE(_DisConnect), &rtw_disassoc_cmd_callback}, /*15*/ ++ {GEN_CMD_CODE(_CreateBss), &rtw_createbss_cmd_callback}, ++ {GEN_CMD_CODE(_SetOpMode), NULL}, ++ {GEN_CMD_CODE(_SiteSurvey), &rtw_survey_cmd_callback}, /*18*/ ++ {GEN_CMD_CODE(_SetAuth), NULL}, ++ ++ {GEN_CMD_CODE(_SetKey), NULL}, /*20*/ ++ {GEN_CMD_CODE(_SetStaKey), &rtw_setstaKey_cmdrsp_callback}, ++ {GEN_CMD_CODE(_SetAssocSta), &rtw_setassocsta_cmdrsp_callback}, ++ {GEN_CMD_CODE(_DelAssocSta), NULL}, ++ {GEN_CMD_CODE(_SetStaPwrState), NULL}, ++ {GEN_CMD_CODE(_SetBasicRate), NULL}, /*25*/ ++ {GEN_CMD_CODE(_GetBasicRate), NULL}, ++ {GEN_CMD_CODE(_SetDataRate), NULL}, ++ {GEN_CMD_CODE(_GetDataRate), NULL}, ++ {GEN_CMD_CODE(_SetPhyInfo), NULL}, ++ ++ {GEN_CMD_CODE(_GetPhyInfo), NULL}, /*30*/ ++ {GEN_CMD_CODE(_SetPhy), NULL}, ++ {GEN_CMD_CODE(_GetPhy), NULL}, ++ {GEN_CMD_CODE(_readRssi), NULL}, ++ {GEN_CMD_CODE(_readGain), NULL}, ++ {GEN_CMD_CODE(_SetAtim), NULL}, /*35*/ ++ {GEN_CMD_CODE(_SetPwrMode), NULL}, ++ {GEN_CMD_CODE(_JoinbssRpt), NULL}, ++ {GEN_CMD_CODE(_SetRaTable), NULL}, ++ {GEN_CMD_CODE(_GetRaTable) , NULL}, ++ ++ {GEN_CMD_CODE(_GetCCXReport), NULL}, /*40*/ ++ {GEN_CMD_CODE(_GetDTMReport), NULL}, ++ {GEN_CMD_CODE(_GetTXRateStatistics), NULL}, ++ {GEN_CMD_CODE(_SetUsbSuspend), NULL}, ++ {GEN_CMD_CODE(_SetH2cLbk), NULL}, ++ {GEN_CMD_CODE(_AddBAReq), NULL}, /*45*/ ++ {GEN_CMD_CODE(_SetChannel), NULL}, /*46*/ ++ {GEN_CMD_CODE(_SetTxPower), NULL}, ++ {GEN_CMD_CODE(_SwitchAntenna), NULL}, ++ {GEN_CMD_CODE(_SetCrystalCap), NULL}, ++ {GEN_CMD_CODE(_SetSingleCarrierTx), NULL}, /*50*/ ++ ++ {GEN_CMD_CODE(_SetSingleToneTx), NULL}, /*51*/ ++ {GEN_CMD_CODE(_SetCarrierSuppressionTx), NULL}, ++ {GEN_CMD_CODE(_SetContinuousTx), NULL}, ++ {GEN_CMD_CODE(_SwitchBandwidth), NULL}, /*54*/ ++ {GEN_CMD_CODE(_TX_Beacon), NULL},/*55*/ ++ ++ {GEN_CMD_CODE(_Set_MLME_EVT), NULL},/*56*/ ++ {GEN_CMD_CODE(_Set_Drv_Extra), NULL},/*57*/ ++ {GEN_CMD_CODE(_Set_H2C_MSG), NULL},/*58*/ ++ {GEN_CMD_CODE(_SetChannelPlan), NULL},/*59*/ ++ {GEN_CMD_CODE(_LedBlink), NULL},/*60*/ ++ ++ {GEN_CMD_CODE(_SetChannelSwitch), NULL},/*61*/ ++ {GEN_CMD_CODE(_TDLS), NULL},/*62*/ ++}; ++#endif ++ ++#endif // _CMD_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h +new file mode 100644 +index 000000000000..9c72f70ea437 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h +@@ -0,0 +1,537 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_DEBUG_H__ ++#define __RTW_DEBUG_H__ ++ ++#include ++#include ++#include ++ ++ ++#define _no_debug_ 0 ++#define _drv_emerg_ 1 ++#define _drv_alert_ 2 ++#define _drv_crit_ 3 ++#define _drv_err_ 4 ++#define _drv_warning_ 5 ++#define _drv_notice_ 6 ++#define _drv_info_ 7 ++#define _drv_dump_ 8 ++#define _drv_debug_ 9 ++#define _drv_always_ _drv_emerg_ ++ ++#define _module_rtl871x_xmit_c_ BIT(0) ++#define _module_xmit_osdep_c_ BIT(1) ++#define _module_rtl871x_recv_c_ BIT(2) ++#define _module_recv_osdep_c_ BIT(3) ++#define _module_rtl871x_mlme_c_ BIT(4) ++#define _module_mlme_osdep_c_ BIT(5) ++#define _module_rtl871x_sta_mgt_c_ BIT(6) ++#define _module_rtl871x_cmd_c_ BIT(7) ++#define _module_cmd_osdep_c_ BIT(8) ++#define _module_rtl871x_io_c_ BIT(9) ++#define _module_io_osdep_c_ BIT(10) ++#define _module_os_intfs_c_ BIT(11) ++#define _module_rtl871x_security_c_ BIT(12) ++#define _module_rtl871x_eeprom_c_ BIT(13) ++#define _module_hal_init_c_ BIT(14) ++#define _module_hci_hal_init_c_ BIT(15) ++#define _module_rtl871x_ioctl_c_ BIT(16) ++#define _module_rtl871x_ioctl_set_c_ BIT(17) ++#define _module_rtl871x_ioctl_query_c_ BIT(18) ++#define _module_rtl871x_pwrctrl_c_ BIT(19) ++#define _module_hci_intfs_c_ BIT(20) ++#define _module_hci_ops_c_ BIT(21) ++#define _module_osdep_service_c_ BIT(22) ++#define _module_mp_ BIT(23) ++#define _module_hci_ops_os_c_ BIT(24) ++#define _module_rtl871x_ioctl_os_c BIT(25) ++#define _module_rtl8712_cmd_c_ BIT(26) ++//#define _module_efuse_ BIT(27) ++#define _module_rtl8192c_xmit_c_ BIT(28) ++#define _module_hal_xmit_c_ BIT(28) ++#define _module_efuse_ BIT(29) ++#define _module_rtl8712_recv_c_ BIT(30) ++#define _module_rtl8712_led_c_ BIT(31) ++ ++#undef _MODULE_DEFINE_ ++ ++#if defined _RTW_XMIT_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_xmit_c_ ++#elif defined _XMIT_OSDEP_C_ ++ #define _MODULE_DEFINE_ _module_xmit_osdep_c_ ++#elif defined _RTW_RECV_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_recv_c_ ++#elif defined _RECV_OSDEP_C_ ++ #define _MODULE_DEFINE_ _module_recv_osdep_c_ ++#elif defined _RTW_MLME_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_mlme_c_ ++#elif defined _MLME_OSDEP_C_ ++ #define _MODULE_DEFINE_ _module_mlme_osdep_c_ ++#elif defined _RTW_MLME_EXT_C_ ++ #define _MODULE_DEFINE_ 1 ++#elif defined _RTW_STA_MGT_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_sta_mgt_c_ ++#elif defined _RTW_CMD_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_cmd_c_ ++#elif defined _CMD_OSDEP_C_ ++ #define _MODULE_DEFINE_ _module_cmd_osdep_c_ ++#elif defined _RTW_IO_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_io_c_ ++#elif defined _IO_OSDEP_C_ ++ #define _MODULE_DEFINE_ _module_io_osdep_c_ ++#elif defined _OS_INTFS_C_ ++ #define _MODULE_DEFINE_ _module_os_intfs_c_ ++#elif defined _RTW_SECURITY_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_security_c_ ++#elif defined _RTW_EEPROM_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_eeprom_c_ ++#elif defined _HAL_INTF_C_ ++ #define _MODULE_DEFINE_ _module_hal_init_c_ ++#elif defined _HCI_HAL_INIT_C_ ++ #define _MODULE_DEFINE_ _module_hci_hal_init_c_ ++#elif defined _RTL871X_IOCTL_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_ioctl_c_ ++#elif defined _RTL871X_IOCTL_SET_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_ioctl_set_c_ ++#elif defined _RTL871X_IOCTL_QUERY_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_ioctl_query_c_ ++#elif defined _RTL871X_PWRCTRL_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_pwrctrl_c_ ++#elif defined _RTW_PWRCTRL_C_ ++ #define _MODULE_DEFINE_ 1 ++#elif defined _HCI_INTF_C_ ++ #define _MODULE_DEFINE_ _module_hci_intfs_c_ ++#elif defined _HCI_OPS_C_ ++ #define _MODULE_DEFINE_ _module_hci_ops_c_ ++#elif defined _SDIO_OPS_C_ ++ #define _MODULE_DEFINE_ 1 ++#elif defined _OSDEP_HCI_INTF_C_ ++ #define _MODULE_DEFINE_ _module_hci_intfs_c_ ++#elif defined _OSDEP_SERVICE_C_ ++ #define _MODULE_DEFINE_ _module_osdep_service_c_ ++#elif defined _HCI_OPS_OS_C_ ++ #define _MODULE_DEFINE_ _module_hci_ops_os_c_ ++#elif defined _RTL871X_IOCTL_LINUX_C_ ++ #define _MODULE_DEFINE_ _module_rtl871x_ioctl_os_c ++#elif defined _RTL8712_CMD_C_ ++ #define _MODULE_DEFINE_ _module_rtl8712_cmd_c_ ++#elif defined _RTL8192C_XMIT_C_ ++ #define _MODULE_DEFINE_ 1 ++#elif defined _RTL8723AS_XMIT_C_ ++ #define _MODULE_DEFINE_ 1 ++#elif defined _RTL8712_RECV_C_ ++ #define _MODULE_DEFINE_ _module_rtl8712_recv_c_ ++#elif defined _RTL8192CU_RECV_C_ ++ #define _MODULE_DEFINE_ _module_rtl8712_recv_c_ ++#elif defined _RTL871X_MLME_EXT_C_ ++ #define _MODULE_DEFINE_ _module_mlme_osdep_c_ ++#elif defined _RTW_MP_C_ ++ #define _MODULE_DEFINE_ _module_mp_ ++#elif defined _RTW_MP_IOCTL_C_ ++ #define _MODULE_DEFINE_ _module_mp_ ++#elif defined _RTW_EFUSE_C_ ++ #define _MODULE_DEFINE_ _module_efuse_ ++#endif ++ ++#ifdef PLATFORM_OS_CE ++extern void rtl871x_cedbg(const char *fmt, ...); ++#endif ++ ++#define RT_TRACE(_Comp, _Level, Fmt) do{}while(0) ++#define _func_enter_ do{}while(0) ++#define _func_exit_ do{}while(0) ++#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) do{}while(0) ++ ++#undef _dbgdump ++ ++#ifdef CONFIG_DEBUG_RTL871X ++ ++#ifndef _RTL871X_DEBUG_C_ ++ extern u32 GlobalDebugLevel; ++ extern u64 GlobalDebugComponents; ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++ #ifdef PLATFORM_OS_XP ++ ++ #define _dbgdump DbgPrint ++ ++ #elif defined PLATFORM_OS_CE ++ ++ #define _dbgdump rtl871x_cedbg ++ ++ #endif ++ ++#elif defined PLATFORM_LINUX ++ ++ #define _dbgdump printk ++ ++#elif defined PLATFORM_FREEBSD ++ ++ #define _dbgdump printf ++ ++#endif ++ ++#endif /* CONFIG_DEBUG_RTL871X */ ++ ++ ++#if defined (_dbgdump) && defined (_MODULE_DEFINE_) ++ ++ #undef RT_TRACE ++ #define RT_TRACE(_Comp, _Level, Fmt)\ ++ do {\ ++ if((_Comp & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) {\ ++ _dbgdump("%s [0x%08x,%d]", RTL871X_MODULE_NAME, (unsigned int)_Comp, _Level);\ ++ _dbgdump Fmt;\ ++ }\ ++ }while(0) ++ ++#endif ++ ++ ++#if defined (_dbgdump) ++ ++ #undef _func_enter_ ++ #define _func_enter_ \ ++ do { \ ++ if (GlobalDebugLevel >= _drv_debug_) \ ++ { \ ++ _dbgdump("\n %s : %s enters at %d\n", RTL871X_MODULE_NAME, __FUNCTION__, __LINE__);\ ++ } \ ++ } while(0) ++ ++ #undef _func_exit_ ++ #define _func_exit_ \ ++ do { \ ++ if (GlobalDebugLevel >= _drv_debug_) \ ++ { \ ++ _dbgdump("\n %s : %s exits at %d\n", RTL871X_MODULE_NAME, __FUNCTION__, __LINE__); \ ++ } \ ++ } while(0) ++ ++ #undef RT_PRINT_DATA ++ #define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \ ++ if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ ++ { \ ++ int __i; \ ++ u8 *ptr = (u8 *)_HexData; \ ++ _dbgdump("Rtl871x: "); \ ++ _dbgdump(_TitleString); \ ++ for( __i=0; __i<(int)_HexDataLen; __i++ ) \ ++ { \ ++ _dbgdump("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \ ++ if (((__i + 1) % 16) == 0) _dbgdump("\n"); \ ++ } \ ++ _dbgdump("\n"); \ ++ } ++#endif ++ ++ ++#ifdef CONFIG_DEBUG_RTL819X ++ ++#undef _dbgdump ++ ++#ifdef PLATFORM_WINDOWS ++ ++ #ifdef PLATFORM_OS_XP ++ ++ #define _dbgdump DbgPrint ++ ++ #elif defined PLATFORM_OS_CE ++ ++ #define _dbgdump rtl871x_cedbg ++ ++ #endif ++ ++#elif defined PLATFORM_LINUX ++ ++ #define _dbgdump printk ++ ++#elif defined PLATFORM_FREEBSD ++ ++ #define _dbgdump printf ++ ++#endif ++ ++#endif /* CONFIG_DEBUG_RTL819X */ ++ ++ ++#ifdef PLATFORM_WINDOWS ++ #define DBG_871X do {} while(0) ++ #define MSG_8192C do {} while(0) ++ #define DBG_8192C do {} while(0) ++ #define WRN_8192C do {} while(0) ++ #define ERR_8192C do {} while(0) ++#endif ++ ++#ifdef PLATFORM_LINUX ++ #define DBG_871X(x, ...) do {} while(0) ++ #define MSG_8192C(x, ...) do {} while(0) ++ #define DBG_8192C(x,...) do {} while(0) ++ #define WRN_8192C(x,...) do {} while(0) ++ #define ERR_8192C(x,...) do {} while(0) ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ #define _dbgdump printf ++ #define DBG_871X(x, ...) do {} while(0) ++ #define MSG_8192C(x, ...) do {} while(0) ++ #define DBG_8192C(x,...) do {} while(0) ++ #define WRN_8192C(x,...) do {} while(0) ++ #define ERR_8192C(x,...) do {} while(0) ++#endif ++ ++extern u32 GlobalDebugLevel; ++#define LOG_LEVEL(level, ...)\ ++ do {\ ++ if(level <= GlobalDebugLevel) {\ ++ printk(__VA_ARGS__);\ ++ }\ ++ }while(0) ++ ++#define DBG_871X_LEVEL LOG_LEVEL ++ ++#if defined (_dbgdump) ++ #undef DBG_871X ++// #define DBG_871X _dbgdump ++ #define DBG_871X(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ ++ #undef MSG_8192C ++// #define MSG_8192C _dbgdump ++ #define MSG_8192C(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ ++ #undef DBG_8192C ++// #define DBG_8192C _dbgdump ++ #define DBG_8192C(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ ++ ++ #undef WRN_8192C ++ #define WRN_8192C _dbgdump ++ ++ #undef ERR_8192C ++ #define ERR_8192C _dbgdump ++#endif ++ ++ ++#ifdef CONFIG_PROC_DEBUG ++ ++ int proc_get_drv_version(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_log_level(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_log_level(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++#ifdef DBG_MEM_ALLOC ++ int proc_get_mstat(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++#endif /* DBG_MEM_ALLOC */ ++ ++ int proc_get_write_reg(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_write_reg(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ int proc_get_read_reg(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_read_reg(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ ++ int proc_get_fwstate(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_sec_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_mlmext_state(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_qos_option(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_ht_option(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rf_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_ap_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_adapter_state(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_trx_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_mac_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_mac_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_mac_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_bb_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_bb_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_bb_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rf_reg_dump1(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rf_reg_dump2(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rf_reg_dump3(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rf_reg_dump4(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++#ifdef CONFIG_AP_MODE ++ ++ int proc_get_all_sta_info(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++ int proc_get_malloc_cnt(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++#endif ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ int proc_get_best_channel(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ int proc_set_best_channel(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++#endif ++ ++ int proc_get_rx_signal(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_rx_signal(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ int proc_get_ht_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_ht_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ int proc_get_cbw40_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_cbw40_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ int proc_get_ampdu_enable(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_ampdu_enable(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ int proc_get_two_path_rssi(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rx_stbc(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_rx_stbc(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++ ++ int proc_get_vid(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_pid(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_get_rssi_disp(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++ ++ int proc_set_rssi_disp(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++int proc_get_sreset(char *page, char **start, off_t offset, int count, int *eof, void *data); ++int proc_set_sreset(struct file *file, const char *buffer, unsigned long count, void *data); ++#endif /* DBG_CONFIG_ERROR_DETECT */ ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++int proc_get_dm_adaptivity(char *page, char **start, ++ off_t offset, int count, ++ int *eof, void *data); ++int proc_set_dm_adaptivity(struct file *file, const char *buffer, ++ unsigned long count, void *data); ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ ++#endif //CONFIG_PROC_DEBUG ++ ++#endif //__RTW_DEBUG_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_eeprom.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_eeprom.h +new file mode 100644 +index 000000000000..432610974572 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_eeprom.h +@@ -0,0 +1,152 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_EEPROM_H__ ++#define __RTW_EEPROM_H__ ++ ++#include ++#include ++#include ++ ++#define RTL8712_EEPROM_ID 0x8712 ++#define EEPROM_MAX_SIZE 256 ++#define CLOCK_RATE 50 //100us ++ ++//- EEPROM opcodes ++#define EEPROM_READ_OPCODE 06 ++#define EEPROM_WRITE_OPCODE 05 ++#define EEPROM_ERASE_OPCODE 07 ++#define EEPROM_EWEN_OPCODE 19 // Erase/write enable ++#define EEPROM_EWDS_OPCODE 16 // Erase/write disable ++ ++//Country codes ++#define USA 0x555320 ++#define EUROPE 0x1 //temp, should be provided later ++#define JAPAN 0x2 //temp, should be provided later ++ ++#ifdef CONFIG_SDIO_HCI ++#define eeprom_cis0_sz 17 ++#define eeprom_cis1_sz 50 ++#endif ++ ++#define EEPROM_CID_DEFAULT 0x0 ++#define EEPROM_CID_ALPHA 0x1 ++#define EEPROM_CID_Senao 0x3 ++#define EEPROM_CID_NetCore 0x5 ++#define EEPROM_CID_CAMEO 0X8 ++#define EEPROM_CID_SITECOM 0x9 ++#define EEPROM_CID_COREGA 0xB ++#define EEPROM_CID_EDIMAX_BELKIN 0xC ++#define EEPROM_CID_SERCOMM_BELKIN 0xE ++#define EEPROM_CID_CAMEO1 0xF ++#define EEPROM_CID_WNC_COREGA 0x12 ++#define EEPROM_CID_CLEVO 0x13 ++#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 ++ ++// ++// Customer ID, note that: ++// This variable is initiailzed through EEPROM or registry, ++// however, its definition may be different with that in EEPROM for ++// EEPROM size consideration. So, we have to perform proper translation between them. ++// Besides, CustomerID of registry has precedence of that of EEPROM. ++// defined below. 060703, by rcnjko. ++// ++typedef enum _RT_CUSTOMER_ID ++{ ++ RT_CID_DEFAULT = 0, ++ RT_CID_8187_ALPHA0 = 1, ++ RT_CID_8187_SERCOMM_PS = 2, ++ RT_CID_8187_HW_LED = 3, ++ RT_CID_8187_NETGEAR = 4, ++ RT_CID_WHQL = 5, ++ RT_CID_819x_CAMEO = 6, ++ RT_CID_819x_RUNTOP = 7, ++ RT_CID_819x_Senao = 8, ++ RT_CID_TOSHIBA = 9, // Merge by Jacken, 2008/01/31. ++ RT_CID_819x_Netcore = 10, ++ RT_CID_Nettronix = 11, ++ RT_CID_DLINK = 12, ++ RT_CID_PRONET = 13, ++ RT_CID_COREGA = 14, ++ RT_CID_CHINA_MOBILE = 15, ++ RT_CID_819x_ALPHA = 16, ++ RT_CID_819x_Sitecom = 17, ++ RT_CID_CCX = 18, // It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. ++ RT_CID_819x_Lenovo = 19, ++ RT_CID_819x_QMI = 20, ++ RT_CID_819x_Edimax_Belkin = 21, ++ RT_CID_819x_Sercomm_Belkin = 22, ++ RT_CID_819x_CAMEO1 = 23, ++ RT_CID_819x_MSI = 24, ++ RT_CID_819x_Acer = 25, ++ RT_CID_819x_AzWave_ASUS = 26, ++ RT_CID_819x_AzWave = 27, // For AzWave in PCIe, The ID is AzWave use and not only Asus ++ RT_CID_819x_HP = 28, ++ RT_CID_819x_WNC_COREGA = 29, ++ RT_CID_819x_Arcadyan_Belkin = 30, ++ RT_CID_819x_SAMSUNG = 31, ++ RT_CID_819x_CLEVO = 32, ++ RT_CID_819x_DELL = 33, ++ RT_CID_819x_PRONETS = 34, ++ RT_CID_819x_Edimax_ASUS = 35, ++ RT_CID_819x_CAMEO_NETGEAR = 36, ++}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID; ++ ++struct eeprom_priv ++{ ++ u8 bautoload_fail_flag; ++ //u8 bempty; ++ //u8 sys_config; ++ u8 mac_addr[6]; //PermanentAddress ++ //u8 config0; ++ u16 channel_plan; ++ //u8 country_string[3]; ++ //u8 tx_power_b[15]; ++ //u8 tx_power_g[15]; ++ //u8 tx_power_a[201]; ++ ++ u8 EepromOrEfuse; ++ ++ u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; ++ ++#ifdef CONFIG_SDIO_HCI ++ u8 sdio_setting; ++ u32 ocr; ++ u8 cis0[eeprom_cis0_sz]; ++ u8 cis1[eeprom_cis1_sz]; ++#endif ++}; ++ ++ ++extern void eeprom_write16(_adapter *padapter, u16 reg, u16 data); ++extern u16 eeprom_read16(_adapter *padapter, u16 reg); ++extern void read_eeprom_content(_adapter *padapter); ++extern void eeprom_read_sz(_adapter * padapter, u16 reg,u8* data, u32 sz); ++ ++extern void read_eeprom_content_by_attrib(_adapter * padapter ); ++ ++#ifdef PLATFORM_LINUX ++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++extern int isAdaptorInfoFileValid(void); ++extern int storeAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv); ++extern int retriveAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv); ++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE ++#endif //PLATFORM_LINUX ++ ++#endif //__RTL871X_EEPROM_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_efuse.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_efuse.h +new file mode 100644 +index 000000000000..dd09b85ea4f2 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_efuse.h +@@ -0,0 +1,123 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_EFUSE_H__ ++#define __RTW_EFUSE_H__ ++ ++#include ++#include ++ ++#define EFUSE_ERROE_HANDLE 1 ++ ++#define PG_STATE_HEADER 0x01 ++#define PG_STATE_WORD_0 0x02 ++#define PG_STATE_WORD_1 0x04 ++#define PG_STATE_WORD_2 0x08 ++#define PG_STATE_WORD_3 0x10 ++#define PG_STATE_DATA 0x20 ++ ++#define PG_SWBYTE_H 0x01 ++#define PG_SWBYTE_L 0x02 ++ ++#define PGPKT_DATA_SIZE 8 ++ ++#define EFUSE_WIFI 0 ++#define EFUSE_BT 1 ++ ++enum _EFUSE_DEF_TYPE { ++ TYPE_EFUSE_MAX_SECTION = 0, ++ TYPE_EFUSE_REAL_CONTENT_LEN = 1, ++ TYPE_AVAILABLE_EFUSE_BYTES_BANK = 2, ++ TYPE_AVAILABLE_EFUSE_BYTES_TOTAL = 3, ++ TYPE_EFUSE_MAP_LEN = 4, ++ TYPE_EFUSE_PROTECT_BYTES_BANK = 5, ++}; ++ ++#define EFUSE_MAX_MAP_LEN 256 ++#define EFUSE_MAX_HW_SIZE 512 ++#define EFUSE_MAX_SECTION_BASE 16 ++ ++#define EXT_HEADER(header) ((header & 0x1F ) == 0x0F) ++#define ALL_WORDS_DISABLED(wde) ((wde & 0x0F) == 0x0F) ++#define GET_HDR_OFFSET_2_0(header) ( (header & 0xE0) >> 5) ++ ++#define EFUSE_REPEAT_THRESHOLD_ 3 ++ ++//============================================= ++// The following is for BT Efuse definition ++//============================================= ++#define EFUSE_BT_MAX_MAP_LEN 1024 ++#define EFUSE_MAX_BANK 4 ++#define EFUSE_MAX_BT_BANK (EFUSE_MAX_BANK-1) ++//============================================= ++/*--------------------------Define Parameters-------------------------------*/ ++#define EFUSE_MAX_WORD_UNIT 4 ++ ++/*------------------------------Define structure----------------------------*/ ++typedef struct PG_PKT_STRUCT_A{ ++ u8 offset; ++ u8 word_en; ++ u8 data[8]; ++ u8 word_cnts; ++}PGPKT_STRUCT,*PPGPKT_STRUCT; ++/*------------------------------Define structure----------------------------*/ ++ ++ ++/*------------------------Export global variable----------------------------*/ ++extern u8 fakeEfuseBank; ++extern u32 fakeEfuseUsedBytes; ++extern u8 fakeEfuseContent[]; ++extern u8 fakeEfuseInitMap[]; ++extern u8 fakeEfuseModifiedMap[]; ++ ++extern u32 BTEfuseUsedBytes; ++extern u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; ++extern u8 BTEfuseInitMap[]; ++extern u8 BTEfuseModifiedMap[]; ++ ++extern u32 fakeBTEfuseUsedBytes; ++extern u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; ++extern u8 fakeBTEfuseInitMap[]; ++extern u8 fakeBTEfuseModifiedMap[]; ++/*------------------------Export global variable----------------------------*/ ++ ++u8 efuse_GetCurrentSize(PADAPTER padapter, u16 *size); ++u16 efuse_GetMaxSize(PADAPTER padapter); ++u8 rtw_efuse_access(PADAPTER padapter, u8 bRead, u16 start_addr, u16 cnts, u8 *data); ++u8 rtw_efuse_map_read(PADAPTER padapter, u16 addr, u16 cnts, u8 *data); ++u8 rtw_efuse_map_write(PADAPTER padapter, u16 addr, u16 cnts, u8 *data); ++ ++u16 Efuse_GetCurrentSize(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest); ++u8 Efuse_CalculateWordCnts(u8 word_en); ++void ReadEFuseByte(PADAPTER Adapter, u16 _offset, u8 *pbuf, BOOLEAN bPseudoTest) ; ++void EFUSE_GetEfuseDefinition(PADAPTER pAdapter, u8 efuseType, u8 type, void *pOut, BOOLEAN bPseudoTest); ++u8 efuse_OneByteRead(PADAPTER pAdapter, u16 addr, u8 *data, BOOLEAN bPseudoTest); ++u8 efuse_OneByteWrite(PADAPTER pAdapter, u16 addr, u8 data, BOOLEAN bPseudoTest); ++ ++void Efuse_PowerSwitch(PADAPTER pAdapter,u8 bWrite,u8 PwrState); ++int Efuse_PgPacketRead(PADAPTER pAdapter, u8 offset, u8 *data, BOOLEAN bPseudoTest); ++int Efuse_PgPacketWrite(PADAPTER pAdapter, u8 offset, u8 word_en, u8 *data, BOOLEAN bPseudoTest); ++void efuse_WordEnableDataRead(u8 word_en, u8 *sourdata, u8 *targetdata); ++u8 Efuse_WordEnableDataWrite(PADAPTER pAdapter, u16 efuse_addr, u8 word_en, u8 *data, BOOLEAN bPseudoTest); ++ ++u8 EFUSE_Read1Byte(PADAPTER pAdapter, u16 Address); ++void EFUSE_ShadowMapUpdate(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest); ++void EFUSE_ShadowRead(PADAPTER pAdapter, u8 Type, u16 Offset, u32 *Value); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_event.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_event.h +new file mode 100644 +index 000000000000..3a0bbf33317b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_event.h +@@ -0,0 +1,153 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_EVENT_H_ ++#define _RTW_EVENT_H_ ++#include ++#include ++ ++#ifndef CONFIG_RTL8711FW ++#ifdef PLATFORM_LINUX ++#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++#include ++#else ++#include ++#endif ++#include ++#endif ++#else ++#include ++#endif//CONFIG_RTL8711FW ++ ++ ++ ++#ifdef CONFIG_H2CLBK ++#include ++#endif ++ ++/* ++Used to report a bss has been scanned ++ ++*/ ++struct survey_event { ++ WLAN_BSSID_EX bss; ++}; ++ ++/* ++Used to report that the requested site survey has been done. ++ ++bss_cnt indicates the number of bss that has been reported. ++ ++ ++*/ ++struct surveydone_event { ++ unsigned int bss_cnt; ++ ++}; ++ ++/* ++Used to report the link result of joinning the given bss ++ ++ ++join_res: ++-1: authentication fail ++-2: association fail ++> 0: TID ++ ++*/ ++struct joinbss_event { ++ struct wlan_network network; ++}; ++ ++/* ++Used to report a given STA has joinned the created BSS. ++It is used in AP/Ad-HoC(M) mode. ++ ++ ++*/ ++struct stassoc_event { ++ unsigned char macaddr[6]; ++ unsigned char rsvd[2]; ++ int cam_id; ++ ++}; ++ ++struct stadel_event { ++ unsigned char macaddr[6]; ++ unsigned char rsvd[2]; //for reason ++ int mac_id; ++}; ++ ++struct addba_event ++{ ++ unsigned int tid; ++}; ++ ++ ++#ifdef CONFIG_H2CLBK ++struct c2hlbk_event{ ++ unsigned char mac[6]; ++ unsigned short s0; ++ unsigned short s1; ++ unsigned int w0; ++ unsigned char b0; ++ unsigned short s2; ++ unsigned char b1; ++ unsigned int w1; ++}; ++#endif//CONFIG_H2CLBK ++ ++#define GEN_EVT_CODE(event) event ## _EVT_ ++ ++ ++ ++struct fwevent { ++ u32 parmsize; ++ void (*event_callback)(_adapter *dev, u8 *pbuf); ++}; ++ ++ ++#define C2HEVENT_SZ 32 ++ ++struct event_node{ ++ unsigned char *node; ++ unsigned char evt_code; ++ unsigned short evt_sz; ++ volatile int *caller_ff_tail; ++ int caller_ff_sz; ++}; ++ ++struct c2hevent_queue { ++ volatile int head; ++ volatile int tail; ++ struct event_node nodes[C2HEVENT_SZ]; ++ unsigned char seq; ++}; ++ ++#define NETWORK_QUEUE_SZ 4 ++ ++struct network_queue { ++ volatile int head; ++ volatile int tail; ++ WLAN_BSSID_EX networks[NETWORK_QUEUE_SZ]; ++}; ++ ++ ++#endif // _WLANEVENT_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ht.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ht.h +new file mode 100644 +index 000000000000..74e416de33ea +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ht.h +@@ -0,0 +1,49 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_HT_H_ ++#define _RTW_HT_H_ ++ ++#include ++#include ++#include "wifi.h" ++ ++struct ht_priv ++{ ++ u32 ht_option; ++ u32 ampdu_enable;//for enable Tx A-MPDU ++ //u8 baddbareq_issued[16]; ++ u32 tx_amsdu_enable;//for enable Tx A-MSDU ++ u32 tx_amdsu_maxlen; // 1: 8k, 0:4k ; default:8k, for tx ++ u32 rx_ampdu_maxlen; //for rx reordering ctrl win_sz, updated when join_callback. ++ ++ u8 bwmode;// ++ u8 ch_offset;//PRIME_CHNL_OFFSET ++ u8 sgi;//short GI ++ ++ //for processing Tx A-MPDU ++ u8 agg_enable_bitmap; ++ //u8 ADDBA_retry_count; ++ u8 candidate_tid_bitmap; ++ ++ struct rtw_ieee80211_ht_cap ht_cap; ++ ++}; ++ ++#endif //_RTL871X_HT_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_io.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_io.h +new file mode 100644 +index 000000000000..daf342acb629 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_io.h +@@ -0,0 +1,504 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#ifndef _RTW_IO_H_ ++#define _RTW_IO_H_ ++ ++#include ++#include ++#include ++ ++#ifdef PLATFORM_LINUX ++#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++#include ++#else ++#include ++#endif ++#include ++//#include ++#include ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) ++#include ++#else ++#include ++#endif ++#endif //CONFIG_USB_HCI ++ ++#endif //PLATFORM_LINUX ++ ++ ++#define NUM_IOREQ 8 ++ ++#ifdef PLATFORM_WINDOWS ++#define MAX_PROT_SZ 64 ++#endif ++#ifdef PLATFORM_LINUX ++#define MAX_PROT_SZ (64-16) ++#endif ++ ++#define _IOREADY 0 ++#define _IO_WAIT_COMPLETE 1 ++#define _IO_WAIT_RSP 2 ++ ++// IO COMMAND TYPE ++#define _IOSZ_MASK_ (0x7F) ++#define _IO_WRITE_ BIT(7) ++#define _IO_FIXED_ BIT(8) ++#define _IO_BURST_ BIT(9) ++#define _IO_BYTE_ BIT(10) ++#define _IO_HW_ BIT(11) ++#define _IO_WORD_ BIT(12) ++#define _IO_SYNC_ BIT(13) ++#define _IO_CMDMASK_ (0x1F80) ++ ++ ++/* ++ For prompt mode accessing, caller shall free io_req ++ Otherwise, io_handler will free io_req ++*/ ++ ++ ++ ++// IO STATUS TYPE ++#define _IO_ERR_ BIT(2) ++#define _IO_SUCCESS_ BIT(1) ++#define _IO_DONE_ BIT(0) ++ ++ ++#define IO_RD32 (_IO_SYNC_ | _IO_WORD_) ++#define IO_RD16 (_IO_SYNC_ | _IO_HW_) ++#define IO_RD8 (_IO_SYNC_ | _IO_BYTE_) ++ ++#define IO_RD32_ASYNC (_IO_WORD_) ++#define IO_RD16_ASYNC (_IO_HW_) ++#define IO_RD8_ASYNC (_IO_BYTE_) ++ ++#define IO_WR32 (_IO_WRITE_ | _IO_SYNC_ | _IO_WORD_) ++#define IO_WR16 (_IO_WRITE_ | _IO_SYNC_ | _IO_HW_) ++#define IO_WR8 (_IO_WRITE_ | _IO_SYNC_ | _IO_BYTE_) ++ ++#define IO_WR32_ASYNC (_IO_WRITE_ | _IO_WORD_) ++#define IO_WR16_ASYNC (_IO_WRITE_ | _IO_HW_) ++#define IO_WR8_ASYNC (_IO_WRITE_ | _IO_BYTE_) ++ ++/* ++ ++ Only Sync. burst accessing is provided. ++ ++*/ ++ ++#define IO_WR_BURST(x) (_IO_WRITE_ | _IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_)) ++#define IO_RD_BURST(x) (_IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_)) ++ ++ ++ ++//below is for the intf_option bit defition... ++ ++#define _INTF_ASYNC_ BIT(0) //support async io ++ ++struct intf_priv; ++struct intf_hdl; ++struct io_queue; ++ ++struct _io_ops ++{ ++ u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr); ++ u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr); ++ u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr); ++ ++ int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val); ++ int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val); ++ int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val); ++ int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata); ++ ++ int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val); ++ int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val); ++ int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val); ++ ++ void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ ++ void (*_sync_irp_protocol_rw)(struct io_queue *pio_q); ++ ++ u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr); ++ ++ u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); ++ ++ u32 (*_write_scsi)(struct intf_hdl *pintfhdl,u32 cnt, u8 *pmem); ++ ++ void (*_read_port_cancel)(struct intf_hdl *pintfhdl); ++ void (*_write_port_cancel)(struct intf_hdl *pintfhdl); ++ ++}; ++ ++struct io_req { ++ _list list; ++ u32 addr; ++ volatile u32 val; ++ u32 command; ++ u32 status; ++ u8 *pbuf; ++ _sema sema; ++ ++#ifdef PLATFORM_OS_CE ++#ifdef CONFIG_USB_HCI ++ // URB handler for rtw_write_mem ++ USB_TRANSFER usb_transfer_write_mem; ++#endif ++#endif ++ ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt); ++ u8 *cnxt; ++ ++#ifdef PLATFORM_OS_XP ++ PMDL pmdl; ++ PIRP pirp; ++ ++#ifdef CONFIG_SDIO_HCI ++ PSDBUS_REQUEST_PACKET sdrp; ++#endif ++ ++#endif ++ ++ ++}; ++ ++struct intf_hdl { ++ ++/* ++ u32 intf_option; ++ u32 bus_status; ++ u32 do_flush; ++ u8 *adapter; ++ u8 *intf_dev; ++ struct intf_priv *pintfpriv; ++ u8 cnt; ++ void (*intf_hdl_init)(u8 *priv); ++ void (*intf_hdl_unload)(u8 *priv); ++ void (*intf_hdl_open)(u8 *priv); ++ void (*intf_hdl_close)(u8 *priv); ++ struct _io_ops io_ops; ++ //u8 intf_status;//moved to struct intf_priv ++ u16 len; ++ u16 done_len; ++*/ ++ _adapter *padapter; ++ struct dvobj_priv *pintf_dev;// pointer to &(padapter->dvobjpriv); ++ ++ struct _io_ops io_ops; ++ ++}; ++ ++struct reg_protocol_rd { ++ ++#ifdef CONFIG_LITTLE_ENDIAN ++ ++ //DW1 ++ u32 NumOfTrans:4; ++ u32 Reserved1:4; ++ u32 Reserved2:24; ++ //DW2 ++ u32 ByteCount:7; ++ u32 WriteEnable:1; //0:read, 1:write ++ u32 FixOrContinuous:1; //0:continuous, 1: Fix ++ u32 BurstMode:1; ++ u32 Byte1Access:1; ++ u32 Byte2Access:1; ++ u32 Byte4Access:1; ++ u32 Reserved3:3; ++ u32 Reserved4:16; ++ //DW3 ++ u32 BusAddress; ++ //DW4 ++ //u32 Value; ++#else ++ ++ ++//DW1 ++ u32 Reserved1 :4; ++ u32 NumOfTrans :4; ++ ++ u32 Reserved2 :24; ++ ++ //DW2 ++ u32 WriteEnable : 1; ++ u32 ByteCount :7; ++ ++ ++ u32 Reserved3 : 3; ++ u32 Byte4Access : 1; ++ ++ u32 Byte2Access : 1; ++ u32 Byte1Access : 1; ++ u32 BurstMode :1 ; ++ u32 FixOrContinuous : 1; ++ ++ u32 Reserved4 : 16; ++ ++ //DW3 ++ u32 BusAddress; ++ ++ //DW4 ++ //u32 Value; ++ ++#endif ++ ++}; ++ ++ ++struct reg_protocol_wt { ++ ++ ++#ifdef CONFIG_LITTLE_ENDIAN ++ ++ //DW1 ++ u32 NumOfTrans:4; ++ u32 Reserved1:4; ++ u32 Reserved2:24; ++ //DW2 ++ u32 ByteCount:7; ++ u32 WriteEnable:1; //0:read, 1:write ++ u32 FixOrContinuous:1; //0:continuous, 1: Fix ++ u32 BurstMode:1; ++ u32 Byte1Access:1; ++ u32 Byte2Access:1; ++ u32 Byte4Access:1; ++ u32 Reserved3:3; ++ u32 Reserved4:16; ++ //DW3 ++ u32 BusAddress; ++ //DW4 ++ u32 Value; ++ ++#else ++ //DW1 ++ u32 Reserved1 :4; ++ u32 NumOfTrans :4; ++ ++ u32 Reserved2 :24; ++ ++ //DW2 ++ u32 WriteEnable : 1; ++ u32 ByteCount :7; ++ ++ u32 Reserved3 : 3; ++ u32 Byte4Access : 1; ++ ++ u32 Byte2Access : 1; ++ u32 Byte1Access : 1; ++ u32 BurstMode :1 ; ++ u32 FixOrContinuous : 1; ++ ++ u32 Reserved4 : 16; ++ ++ //DW3 ++ u32 BusAddress; ++ ++ //DW4 ++ u32 Value; ++ ++#endif ++ ++}; ++ ++ ++ ++/* ++Below is the data structure used by _io_handler ++ ++*/ ++ ++struct io_queue { ++ _lock lock; ++ _list free_ioreqs; ++ _list pending; //The io_req list that will be served in the single protocol read/write. ++ _list processing; ++ u8 *free_ioreqs_buf; // 4-byte aligned ++ u8 *pallocated_free_ioreqs_buf; ++ struct intf_hdl intf; ++}; ++ ++struct io_priv{ ++ ++ _adapter *padapter; ++ ++ struct intf_hdl intf; ++ ++}; ++ ++extern uint ioreq_flush(_adapter *adapter, struct io_queue *ioqueue); ++extern void sync_ioreq_enqueue(struct io_req *preq,struct io_queue *ioqueue); ++extern uint sync_ioreq_flush(_adapter *adapter, struct io_queue *ioqueue); ++ ++ ++extern uint free_ioreq(struct io_req *preq, struct io_queue *pio_queue); ++extern struct io_req *alloc_ioreq(struct io_queue *pio_q); ++ ++extern uint register_intf_hdl(u8 *dev, struct intf_hdl *pintfhdl); ++extern void unregister_intf_hdl(struct intf_hdl *pintfhdl); ++ ++extern void _rtw_attrib_read(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern void _rtw_attrib_write(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++ ++extern u8 _rtw_read8(_adapter *adapter, u32 addr); ++extern u16 _rtw_read16(_adapter *adapter, u32 addr); ++extern u32 _rtw_read32(_adapter *adapter, u32 addr); ++extern void _rtw_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern void _rtw_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern void _rtw_read_port_cancel(_adapter *adapter); ++ ++ ++extern int _rtw_write8(_adapter *adapter, u32 addr, u8 val); ++extern int _rtw_write16(_adapter *adapter, u32 addr, u16 val); ++extern int _rtw_write32(_adapter *adapter, u32 addr, u32 val); ++extern int _rtw_writeN(_adapter *adapter, u32 addr, u32 length, u8 *pdata); ++ ++extern int _rtw_write8_async(_adapter *adapter, u32 addr, u8 val); ++extern int _rtw_write16_async(_adapter *adapter, u32 addr, u16 val); ++extern int _rtw_write32_async(_adapter *adapter, u32 addr, u32 val); ++ ++extern void _rtw_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern u32 _rtw_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++u32 _rtw_write_port_and_wait(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms); ++extern void _rtw_write_port_cancel(_adapter *adapter); ++ ++#ifdef DBG_IO ++bool match_read_sniff_ranges(u16 addr, u16 len); ++bool match_write_sniff_ranges(u16 addr, u16 len); ++ ++extern u8 dbg_rtw_read8(_adapter *adapter, u32 addr, const char *caller, const int line); ++extern u16 dbg_rtw_read16(_adapter *adapter, u32 addr, const char *caller, const int line); ++extern u32 dbg_rtw_read32(_adapter *adapter, u32 addr, const char *caller, const int line); ++ ++extern int dbg_rtw_write8(_adapter *adapter, u32 addr, u8 val, const char *caller, const int line); ++extern int dbg_rtw_write16(_adapter *adapter, u32 addr, u16 val, const char *caller, const int line); ++extern int dbg_rtw_write32(_adapter *adapter, u32 addr, u32 val, const char *caller, const int line); ++extern int dbg_rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *data, const char *caller, const int line); ++ ++#define rtw_read8(adapter, addr) dbg_rtw_read8((adapter), (addr), __FUNCTION__, __LINE__) ++#define rtw_read16(adapter, addr) dbg_rtw_read16((adapter), (addr), __FUNCTION__, __LINE__) ++#define rtw_read32(adapter, addr) dbg_rtw_read32((adapter), (addr), __FUNCTION__, __LINE__) ++#define rtw_read_mem(adapter, addr, cnt, mem) _rtw_read_mem((adapter), (addr), (cnt), (mem)) ++#define rtw_read_port(adapter, addr, cnt, mem) _rtw_read_port((adapter), (addr), (cnt), (mem)) ++#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter)) ++ ++#define rtw_write8(adapter, addr, val) dbg_rtw_write8((adapter), (addr), (val), __FUNCTION__, __LINE__) ++#define rtw_write16(adapter, addr, val) dbg_rtw_write16((adapter), (addr), (val), __FUNCTION__, __LINE__) ++#define rtw_write32(adapter, addr, val) dbg_rtw_write32((adapter), (addr), (val), __FUNCTION__, __LINE__) ++#define rtw_writeN(adapter, addr, length, data) dbg_rtw_writeN((adapter), (addr), (length), (data), __FUNCTION__, __LINE__) ++ ++#define rtw_write8_async(adapter, addr, val) _rtw_write8_async((adapter), (addr), (val)) ++#define rtw_write16_async(adapter, addr, val) _rtw_write16_async((adapter), (addr), (val)) ++#define rtw_write32_async(adapter, addr, val) _rtw_write32_async((adapter), (addr), (val)) ++ ++#define rtw_write_mem(adapter, addr, cnt, mem) _rtw_write_mem((adapter), addr, cnt, mem) ++#define rtw_write_port(adapter, addr, cnt, mem) _rtw_write_port(adapter, addr, cnt, mem) ++#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms)) ++#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel(adapter) ++#else //DBG_IO ++#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr)) ++#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr)) ++#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr)) ++#define rtw_read_mem(adapter, addr, cnt, mem) _rtw_read_mem((adapter), (addr), (cnt), (mem)) ++#define rtw_read_port(adapter, addr, cnt, mem) _rtw_read_port((adapter), (addr), (cnt), (mem)) ++#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter)) ++ ++#define rtw_write8(adapter, addr, val) _rtw_write8((adapter), (addr), (val)) ++#define rtw_write16(adapter, addr, val) _rtw_write16((adapter), (addr), (val)) ++#define rtw_write32(adapter, addr, val) _rtw_write32((adapter), (addr), (val)) ++#define rtw_writeN(adapter, addr, length, data) _rtw_writeN((adapter), (addr), (length), (data)) ++ ++#define rtw_write8_async(adapter, addr, val) _rtw_write8_async((adapter), (addr), (val)) ++#define rtw_write16_async(adapter, addr, val) _rtw_write16_async((adapter), (addr), (val)) ++#define rtw_write32_async(adapter, addr, val) _rtw_write32_async((adapter), (addr), (val)) ++ ++#define rtw_write_mem(adapter, addr, cnt, mem) _rtw_write_mem((adapter), (addr), (cnt), (mem)) ++#define rtw_write_port(adapter, addr, cnt, mem) _rtw_write_port((adapter), (addr), (cnt), (mem)) ++#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms)) ++#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter)) ++#endif //DBG_IO ++ ++extern void rtw_write_scsi(_adapter *adapter, u32 cnt, u8 *pmem); ++ ++//ioreq ++extern void ioreq_read8(_adapter *adapter, u32 addr, u8 *pval); ++extern void ioreq_read16(_adapter *adapter, u32 addr, u16 *pval); ++extern void ioreq_read32(_adapter *adapter, u32 addr, u32 *pval); ++extern void ioreq_write8(_adapter *adapter, u32 addr, u8 val); ++extern void ioreq_write16(_adapter *adapter, u32 addr, u16 val); ++extern void ioreq_write32(_adapter *adapter, u32 addr, u32 val); ++ ++ ++extern uint async_read8(_adapter *adapter, u32 addr, u8 *pbuff, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++extern uint async_read16(_adapter *adapter, u32 addr, u8 *pbuff, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++extern uint async_read32(_adapter *adapter, u32 addr, u8 *pbuff, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++ ++extern void async_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern void async_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++ ++extern void async_write8(_adapter *adapter, u32 addr, u8 val, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++extern void async_write16(_adapter *adapter, u32 addr, u16 val, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++extern void async_write32(_adapter *adapter, u32 addr, u32 val, ++ void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); ++ ++extern void async_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++extern void async_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem); ++ ++ ++int rtw_init_io_priv(_adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops)); ++ ++ ++extern uint alloc_io_queue(_adapter *adapter); ++extern void free_io_queue(_adapter *adapter); ++extern void async_bus_io(struct io_queue *pio_q); ++extern void bus_sync_io(struct io_queue *pio_q); ++extern u32 _ioreq2rwmem(struct io_queue *pio_q); ++extern void dev_power_down(_adapter * Adapter, u8 bpwrup); ++ ++/* ++#define RTL_R8(reg) rtw_read8(padapter, reg) ++#define RTL_R16(reg) rtw_read16(padapter, reg) ++#define RTL_R32(reg) rtw_read32(padapter, reg) ++#define RTL_W8(reg, val8) rtw_write8(padapter, reg, val8) ++#define RTL_W16(reg, val16) rtw_write16(padapter, reg, val16) ++#define RTL_W32(reg, val32) rtw_write32(padapter, reg, val32) ++*/ ++ ++/* ++#define RTL_W8_ASYNC(reg, val8) rtw_write32_async(padapter, reg, val8) ++#define RTL_W16_ASYNC(reg, val16) rtw_write32_async(padapter, reg, val16) ++#define RTL_W32_ASYNC(reg, val32) rtw_write32_async(padapter, reg, val32) ++ ++#define RTL_WRITE_BB(reg, val32) phy_SetUsbBBReg(padapter, reg, val32) ++#define RTL_READ_BB(reg) phy_QueryUsbBBReg(padapter, reg) ++*/ ++ ++#endif //_RTL8711_IO_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl.h +new file mode 100644 +index 000000000000..093e46bda939 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl.h +@@ -0,0 +1,268 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_IOCTL_H_ ++#define _RTW_IOCTL_H_ ++ ++#include ++#include ++#include ++ ++#ifndef OID_802_11_CAPABILITY ++ #define OID_802_11_CAPABILITY 0x0d010122 ++#endif ++ ++#ifndef OID_802_11_PMKID ++ #define OID_802_11_PMKID 0x0d010123 ++#endif ++ ++ ++// For DDK-defined OIDs ++#define OID_NDIS_SEG1 0x00010100 ++#define OID_NDIS_SEG2 0x00010200 ++#define OID_NDIS_SEG3 0x00020100 ++#define OID_NDIS_SEG4 0x01010100 ++#define OID_NDIS_SEG5 0x01020100 ++#define OID_NDIS_SEG6 0x01020200 ++#define OID_NDIS_SEG7 0xFD010100 ++#define OID_NDIS_SEG8 0x0D010100 ++#define OID_NDIS_SEG9 0x0D010200 ++#define OID_NDIS_SEG10 0x0D020200 ++ ++#define SZ_OID_NDIS_SEG1 23 ++#define SZ_OID_NDIS_SEG2 3 ++#define SZ_OID_NDIS_SEG3 6 ++#define SZ_OID_NDIS_SEG4 6 ++#define SZ_OID_NDIS_SEG5 4 ++#define SZ_OID_NDIS_SEG6 8 ++#define SZ_OID_NDIS_SEG7 7 ++#define SZ_OID_NDIS_SEG8 36 ++#define SZ_OID_NDIS_SEG9 24 ++#define SZ_OID_NDIS_SEG10 19 ++ ++// For Realtek-defined OIDs ++#define OID_MP_SEG1 0xFF871100 ++#define OID_MP_SEG2 0xFF818000 ++ ++#define OID_MP_SEG3 0xFF818700 ++#define OID_MP_SEG4 0xFF011100 ++ ++#define DEBUG_OID(dbg, str) \ ++ if((!dbg)) \ ++ { \ ++ RT_TRACE(_module_rtl871x_ioctl_c_,_drv_info_,("%s(%d): %s", __FUNCTION__, __LINE__, str)); \ ++ } ++ ++ ++enum oid_type ++{ ++ QUERY_OID, ++ SET_OID ++}; ++ ++struct oid_funs_node { ++ unsigned int oid_start; //the starting number for OID ++ unsigned int oid_end; //the ending number for OID ++ struct oid_obj_priv *node_array; ++ unsigned int array_sz; //the size of node_array ++ int query_counter; //count the number of query hits for this segment ++ int set_counter; //count the number of set hits for this segment ++}; ++ ++struct oid_par_priv ++{ ++ void *adapter_context; ++ NDIS_OID oid; ++ void *information_buf; ++ u32 information_buf_len; ++ u32 *bytes_rw; ++ u32 *bytes_needed; ++ enum oid_type type_of_oid; ++ u32 dbg; ++}; ++ ++struct oid_obj_priv { ++ unsigned char dbg; // 0: without OID debug message 1: with OID debug message ++ NDIS_STATUS (*oidfuns)(struct oid_par_priv *poid_par_priv); ++}; ++ ++#if (defined(CONFIG_MP_INCLUDED) && defined(_RTW_MP_IOCTL_C_)) || \ ++ (defined(PLATFORM_WINDOWS) && defined(_RTW_IOCTL_RTL_C_)) ++static NDIS_STATUS oid_null_function(struct oid_par_priv* poid_par_priv) ++{ ++ _func_enter_; ++ _func_exit_; ++ return NDIS_STATUS_SUCCESS; ++} ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++int TranslateNdisPsToRtPs(IN NDIS_802_11_POWER_MODE ndisPsMode); ++ ++//OID Handler for Segment 1 ++NDIS_STATUS oid_gen_supported_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_hardware_status_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_media_supported_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_media_in_use_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_maximum_lookahead_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_maximum_frame_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_link_speed_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_transmit_buffer_space_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_receive_buffer_space_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_transmit_block_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_receive_block_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_vendor_id_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_vendor_description_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_current_packet_filter_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_current_lookahead_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_driver_version_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_maximum_total_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_protocol_options_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_mac_options_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_media_connect_status_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_maximum_send_packets_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_vendor_driver_version_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//OID Handler for Segment 2 ++NDIS_STATUS oid_gen_physical_medium_hdl(struct oid_par_priv* poid_par_priv); ++ ++//OID Handler for Segment 3 ++NDIS_STATUS oid_gen_xmit_ok_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_rcv_ok_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_xmit_error_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_rcv_error_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_gen_rcv_no_buffer_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//OID Handler for Segment 4 ++NDIS_STATUS oid_802_3_permanent_address_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_current_address_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_multicast_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_maximum_list_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_mac_options_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++ ++//OID Handler for Segment 5 ++NDIS_STATUS oid_802_3_rcv_error_alignment_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_one_collision_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_more_collisions_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//OID Handler for Segment 6 ++NDIS_STATUS oid_802_3_xmit_deferred_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_max_collisions_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_rcv_overrun_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_underrun_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_heartbeat_failure_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_times_crs_lost_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_3_xmit_late_collisions_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++ ++//OID Handler for Segment 7 ++NDIS_STATUS oid_pnp_capabilities_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_set_power_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_query_power_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_add_wake_up_pattern_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_remove_wake_up_pattern_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_wake_up_pattern_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_pnp_enable_wake_up_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++ ++//OID Handler for Segment 8 ++NDIS_STATUS oid_802_11_bssid_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_ssid_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_infrastructure_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_add_wep_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_remove_wep_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_disassociate_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_authentication_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_privacy_filter_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_bssid_list_scan_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_encryption_status_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_reload_defaults_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_add_key_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_remove_key_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_association_information_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_test_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_media_stream_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_capability_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_pmkid_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++ ++ ++ ++//OID Handler for Segment 9 ++NDIS_STATUS oid_802_11_network_types_supported_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_network_type_in_use_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_tx_power_level_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_rssi_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_rssi_trigger_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_fragmentation_threshold_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_rts_threshold_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_number_of_antennas_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_rx_antenna_selected_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_tx_antenna_selected_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_supported_rates_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_desired_rates_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_configuration_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_power_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_802_11_bssid_list_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//OID Handler for Segment 10 ++NDIS_STATUS oid_802_11_statistics_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//OID Handler for Segment ED ++NDIS_STATUS oid_rt_mh_vender_id_hdl(struct oid_par_priv* poid_par_priv); ++ ++void Set_802_3_MULTICAST_LIST(ADAPTER *pAdapter, UCHAR *MCListbuf, ULONG MCListlen, BOOLEAN bAcceptAllMulticast); ++ ++#endif// end of PLATFORM_WINDOWS ++ ++ ++#if defined(PLATFORM_LINUX) && defined(CONFIG_WIRELESS_EXT) ++extern struct iw_handler_def rtw_handlers_def; ++#endif ++ ++extern NDIS_STATUS drv_query_info( ++ IN _nic_hdl MiniportAdapterContext, ++ IN NDIS_OID Oid, ++ IN void * InformationBuffer, ++ IN u32 InformationBufferLength, ++ OUT u32* BytesWritten, ++ OUT u32* BytesNeeded ++ ); ++ ++extern NDIS_STATUS drv_set_info( ++ IN _nic_hdl MiniportAdapterContext, ++ IN NDIS_OID Oid, ++ IN void * InformationBuffer, ++ IN u32 InformationBufferLength, ++ OUT u32* BytesRead, ++ OUT u32* BytesNeeded ++ ); ++ ++#endif // #ifndef __INC_CEINFO_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_query.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_query.h +new file mode 100644 +index 000000000000..3fcbc549f6bb +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_query.h +@@ -0,0 +1,35 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_IOCTL_QUERY_H_ ++#define _RTW_IOCTL_QUERY_H_ ++ ++#include ++#include ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++u8 query_802_11_capability(_adapter* padapter,u8* pucBuf,u32 * pulOutLen); ++u8 query_802_11_association_information (_adapter * padapter, PNDIS_802_11_ASSOCIATION_INFORMATION pAssocInfo); ++ ++#endif ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_rtl.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_rtl.h +new file mode 100644 +index 000000000000..c01700622795 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_rtl.h +@@ -0,0 +1,83 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_IOCTL_RTL_H_ ++#define _RTW_IOCTL_RTL_H_ ++ ++#include ++#include ++#include ++ ++//************** oid_rtl_seg_01_01 ************** ++NDIS_STATUS oid_rt_get_signal_quality_hdl(struct oid_par_priv* poid_par_priv);//84 ++NDIS_STATUS oid_rt_get_small_packet_crc_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_large_packet_crc_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_tx_retry_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_rx_retry_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_rx_total_packet_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv* poid_par_priv); //8a ++NDIS_STATUS oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv* poid_par_priv); //8b ++ ++NDIS_STATUS oid_rt_get_rx_icv_err_hdl(struct oid_par_priv* poid_par_priv);//93 ++NDIS_STATUS oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_preamble_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_ap_ip_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_channelplan_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_channelplan_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_preamble_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_bcn_intvl_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_dedicate_probe_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_current_tx_power_level_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_channel_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_key_mismatch_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_supported_wireless_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_channel_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_scan_in_progress_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_forced_data_rate_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv* poid_par_priv); ++ ++//************** oid_rtl_seg_01_03 section start ************** ++NDIS_STATUS oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_ap_supported_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_ap_set_passphrase_hdl(struct oid_par_priv* poid_par_priv); ++ ++// oid_rtl_seg_01_11 ++NDIS_STATUS oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv* poid_par_priv); ++ ++//************** oid_rtl_seg_03_00 section start ************** ++NDIS_STATUS oid_rt_get_connect_state_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_default_key_id_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h +new file mode 100644 +index 000000000000..5e21408a0e8c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h +@@ -0,0 +1,78 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_IOCTL_SET_H_ ++#define __RTW_IOCTL_SET_H_ ++ ++#include ++#include ++ ++ ++typedef u8 NDIS_802_11_PMKID_VALUE[16]; ++ ++typedef struct _BSSIDInfo { ++ NDIS_802_11_MAC_ADDRESS BSSID; ++ NDIS_802_11_PMKID_VALUE PMKID; ++} BSSIDInfo, *PBSSIDInfo; ++ ++ ++#ifdef PLATFORM_OS_XP ++typedef struct _NDIS_802_11_PMKID { ++ u32 Length; ++ u32 BSSIDInfoCount; ++ BSSIDInfo BSSIDInfo[1]; ++} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID; ++#endif ++ ++ ++#ifdef PLATFORM_WINDOWS ++u8 rtw_set_802_11_reload_defaults(_adapter * padapter, NDIS_802_11_RELOAD_DEFAULTS reloadDefaults); ++u8 rtw_set_802_11_test(_adapter * padapter, NDIS_802_11_TEST * test); ++u8 rtw_set_802_11_pmkid(_adapter *pdapter, NDIS_802_11_PMKID *pmkid); ++ ++u8 rtw_pnp_set_power_sleep(_adapter* padapter); ++u8 rtw_pnp_set_power_wakeup(_adapter* padapter); ++ ++void rtw_pnp_resume_wk(void *context); ++void rtw_pnp_sleep_wk(void * context); ++ ++#endif ++ ++u8 rtw_set_802_11_add_key(_adapter * padapter, NDIS_802_11_KEY * key); ++u8 rtw_set_802_11_authentication_mode(_adapter *pdapter, NDIS_802_11_AUTHENTICATION_MODE authmode); ++u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid); ++u8 rtw_set_802_11_add_wep(_adapter * padapter, NDIS_802_11_WEP * wep); ++u8 rtw_set_802_11_disassociate(_adapter * padapter); ++u8 rtw_set_802_11_bssid_list_scan(_adapter* padapter, NDIS_802_11_SSID *pssid, int ssid_max_num); ++u8 rtw_set_802_11_infrastructure_mode(_adapter * padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype); ++u8 rtw_set_802_11_remove_wep(_adapter * padapter, u32 keyindex); ++u8 rtw_set_802_11_ssid(_adapter * padapter, NDIS_802_11_SSID * ssid); ++u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid); ++u8 rtw_set_802_11_remove_key(_adapter * padapter, NDIS_802_11_REMOVE_KEY * key); ++ ++u8 rtw_validate_bssid(u8 *bssid); ++u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid); ++ ++u16 rtw_get_cur_max_rate(_adapter *adapter); ++int rtw_set_scan_mode(_adapter *adapter, RT_SCAN_TYPE scan_mode); ++int rtw_set_channel_plan(_adapter *adapter, u8 channel_plan); ++int rtw_set_country(_adapter *adapter, const char *country_code); ++int rtw_set_band(_adapter *adapter, enum _BAND band); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_iol.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_iol.h +new file mode 100644 +index 000000000000..59786eed6138 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_iol.h +@@ -0,0 +1,89 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_IOL_H_ ++#define __RTW_IOL_H_ ++ ++#include ++#include ++#include ++ ++typedef struct _io_offload_cmd { ++ u8 rsvd0; ++ u8 cmd; ++ u16 address; ++ u32 value; ++} IO_OFFLOAD_CMD, IOL_CMD; ++ ++#define IOL_CMD_LLT 0x00 ++//#define IOL_CMD_R_EFUSE 0x01 ++#define IOL_CMD_WB_REG 0x02 ++#define IOL_CMD_WW_REG 0x03 ++#define IOL_CMD_WD_REG 0x04 ++//#define IOL_CMD_W_RF 0x05 ++#define IOL_CMD_DELAY_US 0x80 ++#define IOL_CMD_DELAY_MS 0x81 ++//#define IOL_CMD_DELAY_S 0x82 ++#define IOL_CMD_END 0x83 ++ ++/***************************************************** ++CMD Address Value ++(B1) (B2/B3:H/L addr) (B4:B7 : MSB:LSB) ++****************************************************** ++IOL_CMD_LLT - B7: PGBNDY ++//IOL_CMD_R_EFUSE - - ++IOL_CMD_WB_REG 0x0~0xFFFF B7 ++IOL_CMD_WW_REG 0x0~0xFFFF B6~B7 ++IOL_CMD_WD_REG 0x0~0xFFFF B4~B7 ++//IOL_CMD_W_RF RF Reg B5~B7 ++IOL_CMD_DELAY_US - B6~B7 ++IOL_CMD_DELAY_MS - B6~B7 ++//IOL_CMD_DELAY_S - B6~B7 ++IOL_CMD_END - - ++******************************************************/ ++ ++struct xmit_frame *rtw_IOL_accquire_xmit_frame(ADAPTER *adapter); ++int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds, u32 cmd_len); ++int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary); ++int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value); ++int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value); ++int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value); ++int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us); ++int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms); ++int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame); ++int rtw_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms); ++int rtw_IOL_exec_cmd_array_sync(PADAPTER adapter, u8 *IOL_cmds, u32 cmd_num, u32 max_wating_ms); ++int rtw_IOL_exec_empty_cmds_sync(ADAPTER *adapter, u32 max_wating_ms); ++ ++#ifdef DBG_IO ++int dbg_rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value, const char *caller, const int line); ++int dbg_rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value, const char *caller, const int line); ++int dbg_rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value, const char *caller, const int line); ++#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__) ++#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__) ++#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__) ++#else ++#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value) _rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value)) ++#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value) _rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value)) ++#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value) _rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value)) ++#endif ++ ++bool rtw_IOL_applied(ADAPTER *adapter); ++ ++#endif //__RTW_IOL_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_led.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_led.h +new file mode 100644 +index 000000000000..7de268e48e03 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_led.h +@@ -0,0 +1,216 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_LED_H_ ++#define __RTW_LED_H_ ++ ++#include ++#include ++#include ++ ++#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000) ++ ++typedef enum _LED_CTL_MODE{ ++ LED_CTL_POWER_ON = 1, ++ LED_CTL_LINK = 2, ++ LED_CTL_NO_LINK = 3, ++ LED_CTL_TX = 4, ++ LED_CTL_RX = 5, ++ LED_CTL_SITE_SURVEY = 6, ++ LED_CTL_POWER_OFF = 7, ++ LED_CTL_START_TO_LINK = 8, ++ LED_CTL_START_WPS = 9, ++ LED_CTL_STOP_WPS = 10, ++ LED_CTL_START_WPS_BOTTON = 11, //added for runtop ++ LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA ++ LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN ++}LED_CTL_MODE; ++ ++ ++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) ++//================================================================================ ++// LED object. ++//================================================================================ ++ ++typedef enum _LED_STATE_871x{ ++ LED_UNKNOWN = 0, ++ RTW_LED_ON = 1, ++ RTW_LED_OFF = 2, ++ LED_BLINK_NORMAL = 3, ++ LED_BLINK_SLOWLY = 4, ++ LED_POWER_ON_BLINK = 5, ++ LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning. ++ LED_NO_LINK_BLINK = 7, // LED is blinking during no link state. ++ LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case ++ LED_BLINK_WPS = 9, // LED is blinkg during WPS communication ++ LED_TXRX_BLINK = 10, ++ LED_BLINK_WPS_STOP = 11, //for ALPHA ++ LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN ++}LED_STATE_871x; ++ ++#define IS_LED_WPS_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \ ++ || ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \ ++ || ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress) ++ ++#define IS_LED_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \ ++ ||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress) ++ ++typedef enum _LED_PIN_871x{ ++ LED_PIN_GPIO0, ++ LED_PIN_LED0, ++ LED_PIN_LED1 ++}LED_PIN_871x; ++ ++typedef struct _LED_871x{ ++ _adapter *padapter; ++ LED_PIN_871x LedPin; // Identify how to implement this SW led. ++ LED_STATE_871x CurrLedState; // Current LED state. ++ u8 bLedOn; // true if LED is ON, false if LED is OFF. ++ ++ u8 bSWLedCtrl; ++ ++ u8 bLedBlinkInProgress; // true if it is blinking, false o.w.. ++ // ALPHA, added by chiyoko, 20090106 ++ u8 bLedNoLinkBlinkInProgress; ++ u8 bLedLinkBlinkInProgress; ++ u8 bLedStartToLinkBlinkInProgress; ++ u8 bLedScanBlinkInProgress; ++ u8 bLedWPSBlinkInProgress; ++ ++ u32 BlinkTimes; // Number of times to toggle led state for blinking. ++ LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. ++ ++ _timer BlinkTimer; // Timer object for led blinking. ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD ++ _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED. ++#endif ++} LED_871x, *PLED_871x; ++ ++ ++//================================================================================ ++// LED customization. ++//================================================================================ ++ ++typedef enum _LED_STRATEGY_871x{ ++ SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option. ++ SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA. ++ SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard. ++ SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case. ++ SW_LED_MODE4, //for Edimax / Belkin ++ SW_LED_MODE5, //for Sercomm / Belkin ++ SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7 ++ HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.) ++}LED_STRATEGY_871x, *PLED_STRATEGY_871x; ++#endif //CONFIG_USB_HCI ++ ++#ifdef CONFIG_PCI_HCI ++//================================================================================ ++// LED object. ++//================================================================================ ++ ++typedef enum _LED_STATE_871x{ ++ LED_UNKNOWN = 0, ++ RTW_LED_ON = 1, ++ RTW_LED_OFF = 2, ++ LED_BLINK_NORMAL = 3, ++ LED_BLINK_SLOWLY = 4, ++ LED_POWER_ON_BLINK = 5, ++ LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning. ++ LED_NO_LINK_BLINK = 7, // LED is blinking during no link state. ++ LED_BLINK_StartToBlink = 8, ++ LED_BLINK_TXRX = 9, ++ LED_BLINK_RUNTOP = 10, // Customized for RunTop ++ LED_BLINK_CAMEO = 11, ++}LED_STATE_871x; ++ ++typedef enum _LED_PIN_871x{ ++ LED_PIN_GPIO0, ++ LED_PIN_LED0, ++ LED_PIN_LED1, ++ LED_PIN_LED2 ++}LED_PIN_871x; ++ ++typedef struct _LED_871x{ ++ _adapter *padapter; ++ ++ LED_PIN_871x LedPin; // Identify how to implement this SW led. ++ ++ LED_STATE_871x CurrLedState; // Current LED state. ++ u8 bLedOn; // TRUE if LED is ON, FALSE if LED is OFF. ++ ++ u8 bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w.. ++ u8 bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w.. ++ ++ u8 bLedSlowBlinkInProgress;//added by vivi, for led new mode ++ u32 BlinkTimes; // Number of times to toggle led state for blinking. ++ LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. ++ ++ _timer BlinkTimer; // Timer object for led blinking. ++ ++ u8 bLedLinkBlinkInProgress; ++ u8 bLedNoLinkBlinkInProgress; ++ u8 bLedScanBlinkInProgress; ++} LED_871x, *PLED_871x; ++ ++ ++//================================================================================ ++// LED customization. ++//================================================================================ ++ ++typedef enum _LED_STRATEGY_871x{ ++ SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option. ++ SW_LED_MODE1, // SW control for PCI Express ++ SW_LED_MODE2, // SW control for Cameo. ++ SW_LED_MODE3, // SW contorl for RunTop. ++ SW_LED_MODE4, // SW control for Netcore ++ SW_LED_MODE5, //added by vivi, for led new mode, DLINK ++ SW_LED_MODE6, //added by vivi, for led new mode, PRONET ++ SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec ++ SW_LED_MODE8, //added by chiyokolin, for QMI ++ SW_LED_MODE9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 ++ SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS ++ HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes) ++}LED_STRATEGY_871x, *PLED_STRATEGY_871x; ++ ++#define LED_CM8_BLINK_INTERVAL 500 //for QMI ++#endif //CONFIG_PCI_HCI ++ ++struct led_priv{ ++ /* add for led controll */ ++ LED_871x SwLed0; ++ LED_871x SwLed1; ++ LED_STRATEGY_871x LedStrategy; ++ u8 bRegUseLed; ++ void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction); ++ /* add for led controll */ ++}; ++ ++#ifdef CONFIG_SW_LED ++#define rtw_led_control(adapter, LedAction) \ ++ do { \ ++ if((adapter)->ledpriv.LedControlHandler) \ ++ (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \ ++ } while(0) ++#else //CONFIG_SW_LED ++#define rtw_led_control(adapter, LedAction) ++#endif //CONFIG_SW_LED ++ ++extern void BlinkHandler(PLED_871x pLed); ++ ++#endif //__RTW_LED_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme.h +new file mode 100644 +index 000000000000..862326d681b8 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme.h +@@ -0,0 +1,843 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_MLME_H_ ++#define __RTW_MLME_H_ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_INTEL_WIDI ++#include ++#endif ++ ++#define MAX_BSS_CNT 128 ++//#define MAX_JOIN_TIMEOUT 2000 ++//#define MAX_JOIN_TIMEOUT 2500 ++#define MAX_JOIN_TIMEOUT 6500 ++ ++// Commented by Albert 20101105 ++// Increase the scanning timeout because of increasing the SURVEY_TO value. ++ ++#define SCANNING_TIMEOUT 8000 ++ ++#define SCAN_INTERVAL (30) // unit:2sec, 30*2=60sec ++ ++#ifdef PALTFORM_OS_WINCE ++#define SCANQUEUE_LIFETIME 12000000 // unit:us ++#else ++#define SCANQUEUE_LIFETIME 20 // unit:sec ++#endif ++ ++#define WIFI_NULL_STATE 0x00000000 ++ ++#define WIFI_ASOC_STATE 0x00000001 // Under Linked state... ++#define WIFI_REASOC_STATE 0x00000002 ++#define WIFI_SLEEP_STATE 0x00000004 ++#define WIFI_STATION_STATE 0x00000008 ++ ++#define WIFI_AP_STATE 0x00000010 ++#define WIFI_ADHOC_STATE 0x00000020 ++#define WIFI_ADHOC_MASTER_STATE 0x00000040 ++#define WIFI_UNDER_LINKING 0x00000080 ++ ++#define WIFI_UNDER_WPS 0x00000100 ++//#define WIFI_UNDER_CMD 0x00000200 ++//#define WIFI_UNDER_P2P 0x00000400 ++#define WIFI_STA_ALIVE_CHK_STATE 0x00000400 ++#define WIFI_SITE_MONITOR 0x00000800 //to indicate the station is under site surveying ++ ++#ifdef WDS ++#define WIFI_WDS 0x00001000 ++#define WIFI_WDS_RX_BEACON 0x00002000 // already rx WDS AP beacon ++#endif ++#ifdef AUTO_CONFIG ++#define WIFI_AUTOCONF 0x00004000 ++#define WIFI_AUTOCONF_IND 0x00008000 ++#endif ++ ++/* ++// ========== P2P Section Start =============== ++#define WIFI_P2P_LISTEN_STATE 0x00010000 ++#define WIFI_P2P_GROUP_FORMATION_STATE 0x00020000 ++// ========== P2P Section End =============== ++*/ ++ ++//#ifdef UNDER_MPTEST ++#define WIFI_MP_STATE 0x00010000 ++#define WIFI_MP_CTX_BACKGROUND 0x00020000 // in continous tx background ++#define WIFI_MP_CTX_ST 0x00040000 // in continous tx with single-tone ++#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 // pending in continous tx background due to out of skb ++#define WIFI_MP_CTX_CCK_HW 0x00100000 // in continous tx ++#define WIFI_MP_CTX_CCK_CS 0x00200000 // in continous tx with carrier suppression ++#define WIFI_MP_LPBK_STATE 0x00400000 ++//#endif ++ ++//#define _FW_UNDER_CMD WIFI_UNDER_CMD ++#define _FW_UNDER_LINKING WIFI_UNDER_LINKING ++#define _FW_LINKED WIFI_ASOC_STATE ++#define _FW_UNDER_SURVEY WIFI_SITE_MONITOR ++ ++ ++enum dot11AuthAlgrthmNum { ++ dot11AuthAlgrthm_Open = 0, ++ dot11AuthAlgrthm_Shared, ++ dot11AuthAlgrthm_8021X, ++ dot11AuthAlgrthm_Auto, ++ dot11AuthAlgrthm_MaxNum ++}; ++ ++// Scan type including active and passive scan. ++typedef enum _RT_SCAN_TYPE ++{ ++ SCAN_PASSIVE, ++ SCAN_ACTIVE, ++ SCAN_MIX, ++}RT_SCAN_TYPE, *PRT_SCAN_TYPE; ++ ++enum DriverInterface { ++ DRIVER_WEXT = 1, ++ DRIVER_CFG80211 = 2 ++}; ++ ++enum _BAND ++{ ++ GHZ24_50 = 0, ++ GHZ_50, ++ GHZ_24, ++ GHZ_MAX, ++}; ++ ++#define rtw_band_valid(band) ((band) >= GHZ24_50 && (band) < GHZ_MAX) ++ ++enum SCAN_RESULT_TYPE ++{ ++ SCAN_RESULT_P2P_ONLY = 0, // Will return all the P2P devices. ++ SCAN_RESULT_ALL = 1, // Will return all the scanned device, include AP. ++ SCAN_RESULT_WFD_TYPE = 2 // Will just return the correct WFD device. ++ // If this device is Miracast sink device, it will just return all the Miracast source devices. ++}; ++ ++/* ++ ++there are several "locks" in mlme_priv, ++since mlme_priv is a shared resource between many threads, ++like ISR/Call-Back functions, the OID handlers, and even timer functions. ++ ++ ++Each _queue has its own locks, already. ++Other items are protected by mlme_priv.lock. ++ ++To avoid possible dead lock, any thread trying to modifiying mlme_priv ++SHALL not lock up more than one locks at a time! ++ ++*/ ++ ++ ++#define traffic_threshold 10 ++#define traffic_scan_period 500 ++ ++struct sitesurvey_ctrl { ++ u64 last_tx_pkts; ++ uint last_rx_pkts; ++ sint traffic_busy; ++ _timer sitesurvey_ctrl_timer; ++}; ++ ++typedef struct _RT_LINK_DETECT_T{ ++ u32 NumTxOkInPeriod; ++ u32 NumRxOkInPeriod; ++ u32 NumRxUnicastOkInPeriod; ++ BOOLEAN bBusyTraffic; ++ BOOLEAN bTxBusyTraffic; ++ BOOLEAN bRxBusyTraffic; ++ BOOLEAN bHigherBusyTraffic; // For interrupt migration purpose. ++ BOOLEAN bHigherBusyRxTraffic; // We may disable Tx interrupt according as Rx traffic. ++ BOOLEAN bHigherBusyTxTraffic; // We may disable Tx interrupt according as Tx traffic. ++}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T; ++ ++struct profile_info { ++ u8 ssidlen; ++ u8 ssid[ WLAN_SSID_MAXLEN ]; ++ u8 peermac[ ETH_ALEN ]; ++}; ++ ++struct tx_invite_req_info{ ++ u8 token; ++ u8 benable; ++ u8 go_ssid[ WLAN_SSID_MAXLEN ]; ++ u8 ssidlen; ++ u8 go_bssid[ ETH_ALEN ]; ++ u8 peer_macaddr[ ETH_ALEN ]; ++ u8 operating_ch; // This information will be set by using the p2p_set op_ch=x ++ u8 peer_ch; // The listen channel for peer P2P device ++ ++}; ++ ++struct tx_invite_resp_info{ ++ u8 token; // Used to record the dialog token of p2p invitation request frame. ++}; ++ ++#ifdef CONFIG_WFD ++ ++struct wifi_display_info{ ++ u16 wfd_enable; // Eanble/Disable the WFD function. ++ u16 rtsp_ctrlport; // TCP port number at which the this WFD device listens for RTSP messages ++ u16 peer_rtsp_ctrlport; // TCP port number at which the peer WFD device listens for RTSP messages ++ // This filed should be filled when receiving the gropu negotiation request ++ ++ u8 peer_session_avail; // WFD session is available or not for the peer wfd device. ++ // This variable will be set when sending the provisioning discovery request to peer WFD device. ++ // And this variable will be reset when it is read by using the iwpriv p2p_get wfd_sa command. ++ ++ u8 ip_address[4]; ++ u8 peer_ip_address[4]; ++ u8 wfd_pc; // WFD preferred connection ++ // 0 -> Prefer to use the P2P for WFD connection on peer side. ++ // 1 -> Prefer to use the TDLS for WFD connection on peer side. ++ ++ u8 wfd_device_type; // WFD Device Type ++ // 0 -> WFD Source Device ++ // 1 -> WFD Primary Sink Device ++ enum SCAN_RESULT_TYPE scan_result_type; // Used when P2P is enable. This parameter will impact the scan result. ++}; ++#endif //CONFIG_WFD ++ ++struct tx_provdisc_req_info{ ++ u16 wps_config_method_request; // Used when sending the provisioning request frame ++ u16 peer_channel_num[2]; // The channel number which the receiver stands. ++ NDIS_802_11_SSID ssid; ++ u8 peerDevAddr[ ETH_ALEN ]; // Peer device address ++ u8 peerIFAddr[ ETH_ALEN ]; // Peer interface address ++ u8 benable; // This provision discovery request frame is trigger to send or not ++}; ++ ++struct rx_provdisc_req_info{ //When peer device issue prov_disc_req first, we should store the following informations ++ u8 peerDevAddr[ ETH_ALEN ]; // Peer device address ++ u8 strconfig_method_desc_of_prov_disc_req[4]; // description for the config method located in the provisioning discovery request frame. ++ // The UI must know this information to know which config method the remote p2p device is requiring. ++}; ++ ++struct tx_nego_req_info{ ++ u16 peer_channel_num[2]; // The channel number which the receiver stands. ++ u8 peerDevAddr[ ETH_ALEN ]; // Peer device address ++ u8 benable; // This negoitation request frame is trigger to send or not ++}; ++ ++struct group_id_info{ ++ u8 go_device_addr[ ETH_ALEN ]; // The GO's device address of this P2P group ++ u8 ssid[ WLAN_SSID_MAXLEN ]; // The SSID of this P2P group ++}; ++ ++struct scan_limit_info{ ++ u8 scan_op_ch_only; // When this flag is set, the driver should just scan the operation channel ++#ifndef P2P_OP_CHECK_SOCIAL_CH ++ u8 operation_ch[2]; // Store the operation channel of invitation request frame ++#else ++ u8 operation_ch[5]; // Store additional channel 1,6,11 for Android 4.2 IOT & Nexus 4 ++#endif //P2P_OP_CHECK_SOCIAL_CH ++}; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++struct cfg80211_wifidirect_info{ ++ _timer remain_on_ch_timer; ++ u8 restore_channel; ++ struct ieee80211_channel remain_on_ch_channel; ++ enum nl80211_channel_type remain_on_ch_type; ++ u64 remain_on_ch_cookie; ++ bool is_ro_ch; ++}; ++#endif //CONFIG_IOCTL_CFG80211 ++ ++struct wifidirect_info{ ++ _adapter* padapter; ++ _timer find_phase_timer; ++ _timer restore_p2p_state_timer; ++ ++ // Used to do the scanning. After confirming the peer is availalble, the driver transmits the P2P frame to peer. ++ _timer pre_tx_scan_timer; ++ _timer reset_ch_sitesurvey; ++ _timer reset_ch_sitesurvey2; // Just for resetting the scan limit function by using p2p nego ++#ifdef CONFIG_CONCURRENT_MODE ++ // Used to switch the channel between legacy AP and listen state. ++ _timer ap_p2p_switch_timer; ++#endif ++ struct tx_provdisc_req_info tx_prov_disc_info; ++ struct rx_provdisc_req_info rx_prov_disc_info; ++ struct tx_invite_req_info invitereq_info; ++ struct profile_info profileinfo[ P2P_MAX_PERSISTENT_GROUP_NUM ]; // Store the profile information of persistent group ++ struct tx_invite_resp_info inviteresp_info; ++ struct tx_nego_req_info nego_req_info; ++ struct group_id_info groupid_info; // Store the group id information when doing the group negotiation handshake. ++ struct scan_limit_info rx_invitereq_info; // Used for get the limit scan channel from the Invitation procedure ++ struct scan_limit_info p2p_info; // Used for get the limit scan channel from the P2P negotiation handshake ++#ifdef CONFIG_WFD ++ struct wifi_display_info *wfd_info; ++#endif ++ enum P2P_ROLE role; ++ enum P2P_STATE pre_p2p_state; ++ enum P2P_STATE p2p_state; ++ u8 device_addr[ETH_ALEN]; // The device address should be the mac address of this device. ++ u8 interface_addr[ETH_ALEN]; ++ u8 social_chan[4]; ++ u8 listen_channel; ++ u8 operating_channel; ++ u8 listen_dwell; // This value should be between 1 and 3 ++ u8 support_rate[8]; ++ u8 p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN]; ++ u8 intent; // should only include the intent value. ++ u8 p2p_peer_interface_addr[ ETH_ALEN ]; ++ u8 p2p_peer_device_addr[ ETH_ALEN ]; ++ u8 peer_intent; // Included the intent value and tie breaker value. ++ u8 device_name[ WPS_MAX_DEVICE_NAME_LEN ]; // Device name for displaying on searching device screen ++ u8 device_name_len; ++ u8 profileindex; // Used to point to the index of profileinfo array ++ u8 peer_operating_ch; ++ u8 find_phase_state_exchange_cnt; ++ u16 device_password_id_for_nego; // The device password ID for group negotation ++ u8 negotiation_dialog_token; ++ u8 nego_ssid[ WLAN_SSID_MAXLEN ]; // SSID information for group negotitation ++ u8 nego_ssidlen; ++ u8 p2p_group_ssid[WLAN_SSID_MAXLEN]; ++ u8 p2p_group_ssid_len; ++ u8 persistent_supported; // Flag to know the persistent function should be supported or not. ++ // In the Sigma test, the Sigma will provide this enable from the sta_set_p2p CAPI. ++ // 0: disable ++ // 1: enable ++ u8 session_available; // Flag to set the WFD session available to enable or disable "by Sigma" ++ // In the Sigma test, the Sigma will disable the session available by using the sta_preset CAPI. ++ // 0: disable ++ // 1: enable ++ u8 wfd_tdls_enable; // Flag to enable or disable the TDLS by WFD Sigma ++ // 0: disable ++ // 1: enable ++ u8 wfd_tdls_weaksec; // Flag to enable or disable the weak security function for TDLS by WFD Sigma ++ // 0: disable ++ // In this case, the driver can't issue the tdsl setup request frame. ++ // 1: enable ++ // In this case, the driver can issue the tdls setup request frame ++ // even the current security is weak security. ++ ++ enum P2P_WPSINFO ui_got_wps_info; // This field will store the WPS value (PIN value or PBC) that UI had got from the user. ++ u16 supported_wps_cm; // This field describes the WPS config method which this driver supported. ++ // The value should be the combination of config method defined in page104 of WPS v2.0 spec. ++ u8 external_uuid; // UUID flag ++ u8 uuid[16]; // UUID ++ uint channel_list_attr_len; // This field will contain the length of body of P2P Channel List attribute of group negotitation response frame. ++ u8 channel_list_attr[100]; // This field will contain the body of P2P Channel List attribute of group negotitation response frame. ++ // We will use the channel_cnt and channel_list fields when constructing the group negotitation confirm frame. ++ u8 driver_interface; // Indicate DRIVER_WEXT or DRIVER_CFG80211 ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ u16 ext_listen_interval; // The interval to be available with legacy AP (ms) ++ u16 ext_listen_period; // The time period to be available for P2P listen state (ms) ++#endif ++#ifdef CONFIG_P2P_PS ++ enum P2P_PS_MODE p2p_ps_mode; // indicate p2p ps mode ++ enum P2P_PS_STATE p2p_ps_state; // indicate p2p ps state ++ u8 noa_index; // Identifies and instance of Notice of Absence timing. ++ u8 ctwindow; // Client traffic window. A period of time in TU after TBTT. ++ u8 opp_ps; // opportunistic power save. ++ u8 noa_num; // number of NoA descriptor in P2P IE. ++ u8 noa_count[P2P_MAX_NOA_NUM]; // Count for owner, Type of client. ++ u32 noa_duration[P2P_MAX_NOA_NUM]; // Max duration for owner, preferred or min acceptable duration for client. ++ u32 noa_interval[P2P_MAX_NOA_NUM]; // Length of interval for owner, preferred or max acceptable interval of client. ++ u32 noa_start_time[P2P_MAX_NOA_NUM]; // schedule expressed in terms of the lower 4 bytes of the TSF timer. ++#endif // CONFIG_P2P_PS ++}; ++ ++struct tdls_ss_record{ //signal strength record; recording the tdls sta with lowerest ss ++ u8 macaddr[ETH_ALEN]; ++ u8 RxPWDBAll; ++ u8 is_tdls_sta; // _TRUE: direct link sta, _FALSE: else ++}; ++ ++struct tdls_info{ ++ u8 ap_prohibited; ++ uint setup_state; ++ u8 sta_cnt; ++ u8 sta_maximum; // 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else; ++ struct tdls_ss_record ss_record; ++ u8 macid_index; //macid entry that is ready to write ++ u8 clear_cam; //cam entry that is trying to clear, using it in direct link teardown ++ u8 ch_sensing; ++ u8 cur_channel; ++ u8 candidate_ch; ++ u8 collect_pkt_num[MAX_CHANNEL_NUM]; ++ _lock cmd_lock; ++ _lock hdl_lock; ++ u8 watchdog_count; ++ u8 dev_discovered; //WFD_TDLS: for sigma test ++ u8 enable; ++#ifdef CONFIG_WFD ++ struct wifi_display_info *wfd_info; ++#endif ++}; ++ ++struct mlme_priv { ++ ++ _lock lock; ++ sint fw_state; //shall we protect this variable? maybe not necessarily... ++ ++ u8 to_join; //flag ++ #ifdef CONFIG_LAYER2_ROAMING ++ u8 to_roaming; // roaming trying times ++ #endif ++ ++ u8 *nic_hdl; ++ ++ u8 not_indic_disco; ++ _list *pscanned; ++ _queue free_bss_pool; ++ _queue scanned_queue; ++ u8 *free_bss_buf; ++ u32 num_of_scanned; ++ ++ NDIS_802_11_SSID assoc_ssid; ++ u8 assoc_bssid[6]; ++ ++ struct wlan_network cur_network; ++ ++ //uint wireless_mode; no used, remove it ++ ++ u32 scan_interval; ++ ++ _timer assoc_timer; ++ ++ uint assoc_by_bssid; ++ uint assoc_by_rssi; ++ ++ _timer scan_to_timer; // driver itself handles scan_timeout status. ++ u32 scan_start_time; // used to evaluate the time spent in scanning ++ ++ #ifdef CONFIG_SET_SCAN_DENY_TIMER ++ _timer set_scan_deny_timer; ++ ATOMIC_T set_scan_deny; //0: allowed, 1: deny ++ #endif ++ ++ struct qos_priv qospriv; ++ ++#ifdef CONFIG_80211N_HT ++ ++ /* Number of non-HT AP/stations */ ++ int num_sta_no_ht; ++ ++ /* Number of HT AP/stations 20 MHz */ ++ //int num_sta_ht_20mhz; ++ ++ ++ int num_FortyMHzIntolerant; ++ ++ struct ht_priv htpriv; ++ ++#endif ++ ++ RT_LINK_DETECT_T LinkDetectInfo; ++ _timer dynamic_chk_timer; //dynamic/periodic check timer ++ ++ u8 acm_mask; // for wmm acm mask ++ u8 ChannelPlan; ++ RT_SCAN_TYPE scan_mode; // active: 1, passive: 0 ++ ++ //u8 probereq_wpsie[MAX_WPS_IE_LEN];//added in probe req ++ //int probereq_wpsie_len; ++ u8 *wps_probe_req_ie; ++ u32 wps_probe_req_ie_len; ++ ++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ /* Number of associated Non-ERP stations (i.e., stations using 802.11b ++ * in 802.11g BSS) */ ++ int num_sta_non_erp; ++ ++ /* Number of associated stations that do not support Short Slot Time */ ++ int num_sta_no_short_slot_time; ++ ++ /* Number of associated stations that do not support Short Preamble */ ++ int num_sta_no_short_preamble; ++ ++ int olbc; /* Overlapping Legacy BSS Condition */ ++ ++ /* Number of HT associated stations that do not support greenfield */ ++ int num_sta_ht_no_gf; ++ ++ /* Number of associated non-HT stations */ ++ //int num_sta_no_ht; ++ ++ /* Number of HT associated stations 20 MHz */ ++ int num_sta_ht_20mhz; ++ ++ /* Overlapping BSS information */ ++ int olbc_ht; ++ ++#ifdef CONFIG_80211N_HT ++ u16 ht_op_mode; ++#endif /* CONFIG_80211N_HT */ ++ ++ u8 *assoc_req; ++ u32 assoc_req_len; ++ u8 *assoc_rsp; ++ u32 assoc_rsp_len; ++ ++ u8 *wps_beacon_ie; ++ //u8 *wps_probe_req_ie; ++ u8 *wps_probe_resp_ie; ++ u8 *wps_assoc_resp_ie; // for CONFIG_IOCTL_CFG80211, this IE could include p2p ie / wfd ie ++ ++ u32 wps_beacon_ie_len; ++ //u32 wps_probe_req_ie_len; ++ u32 wps_probe_resp_ie_len; ++ u32 wps_assoc_resp_ie_len; // for CONFIG_IOCTL_CFG80211, this IE len could include p2p ie / wfd ie ++ ++ u8 *p2p_beacon_ie; ++ u8 *p2p_probe_req_ie; ++ u8 *p2p_probe_resp_ie; ++ u8 *p2p_go_probe_resp_ie; //for GO ++ u8 *p2p_assoc_req_ie; ++ ++ u32 p2p_beacon_ie_len; ++ u32 p2p_probe_req_ie_len; ++ u32 p2p_probe_resp_ie_len; ++ u32 p2p_go_probe_resp_ie_len; //for GO ++ u32 p2p_assoc_req_ie_len; ++/* ++#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) ++ //u8 *wps_p2p_beacon_ie; ++ u8 *p2p_beacon_ie; ++ u8 *wps_p2p_probe_resp_ie; ++ u8 *wps_p2p_assoc_resp_ie; ++ //u32 wps_p2p_beacon_ie_len; ++ u32 p2p_beacon_ie_len; ++ u32 wps_p2p_probe_resp_ie_len; ++ u32 wps_p2p_assoc_resp_ie_len; ++#endif ++*/ ++ ++ _lock bcn_update_lock; ++ u8 update_bcn; ++ ++ ++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME) ++ ++#if defined(CONFIG_WFD) && defined(CONFIG_IOCTL_CFG80211) ++ ++ u8 *wfd_beacon_ie; ++ u8 *wfd_probe_req_ie; ++ u8 *wfd_probe_resp_ie; ++ u8 *wfd_go_probe_resp_ie; //for GO ++ u8 *wfd_assoc_req_ie; ++ ++ u32 wfd_beacon_ie_len; ++ u32 wfd_probe_req_ie_len; ++ u32 wfd_probe_resp_ie_len; ++ u32 wfd_go_probe_resp_ie_len; //for GO ++ u32 wfd_assoc_req_ie_len; ++ ++#endif ++ ++#ifdef RTK_DMP_PLATFORM ++ // DMP kobject_hotplug function signal need in passive level ++ _workitem Linkup_workitem; ++ _workitem Linkdown_workitem; ++#endif ++ ++#ifdef CONFIG_INTEL_WIDI ++ int widi_state; ++ int listen_state; ++ _timer listen_timer; ++ ATOMIC_T rx_probe_rsp; // 1:receive probe respone from RDS source. ++ u8 *l2sdTaBuffer; ++ u8 channel_idx; ++ s8 group_cnt; //For WiDi 3.5, they specified another scan algo. for WFD/RDS co-existed ++ u8 sa_ext[L2SDTA_SERVICE_VE_LEN]; ++ ++ u8 widi_enable; ++ /** ++ * For WiDi 4; upper layer would set ++ * p2p_primary_device_type_category_id ++ * p2p_primary_device_type_sub_category_id ++ * p2p_secondary_device_type_category_id ++ * p2p_secondary_device_type_sub_category_id ++ */ ++ u16 p2p_pdt_cid; ++ u16 p2p_pdt_scid; ++ u8 num_p2p_sdt; ++ u16 p2p_sdt_cid[MAX_NUM_P2P_SDT]; ++ u16 p2p_sdt_scid[MAX_NUM_P2P_SDT]; ++ u8 p2p_reject_disable; //When starting NL80211 wpa_supplicant/hostapd, it will call netdev_close ++ //such that it will cause p2p disabled. Use this flag to reject. ++#endif // CONFIG_INTEL_WIDI ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ u8 scanning_via_buddy_intf; ++#endif ++}; ++ ++#ifdef CONFIG_AP_MODE ++ ++struct hostapd_priv ++{ ++ _adapter *padapter; ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ struct net_device *pmgnt_netdev; ++ struct usb_anchor anchored; ++#endif ++ ++}; ++ ++extern int hostapd_mode_init(_adapter *padapter); ++extern void hostapd_mode_unload(_adapter *padapter); ++#endif ++ ++ ++extern void rtw_joinbss_event_prehandle(_adapter *adapter, u8 *pbuf); ++extern void rtw_survey_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_surveydone_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_joinbss_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_stassoc_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_stadel_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_atimdone_event_callback(_adapter *adapter, u8 *pbuf); ++extern void rtw_cpwm_event_callback(_adapter *adapter, u8 *pbuf); ++ ++#ifdef PLATFORM_WINDOWS ++extern thread_return event_thread(void *context); ++ ++extern void rtw_join_timeout_handler ( ++ IN PVOID SystemSpecific1, ++ IN PVOID FunctionContext, ++ IN PVOID SystemSpecific2, ++ IN PVOID SystemSpecific3 ++ ); ++ ++extern void _rtw_scan_timeout_handler ( ++ IN PVOID SystemSpecific1, ++ IN PVOID FunctionContext, ++ IN PVOID SystemSpecific2, ++ IN PVOID SystemSpecific3 ++ ); ++ ++#endif ++ ++#if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD) ++extern int event_thread(void *context); ++extern void rtw_join_timeout_handler(void* FunctionContext); ++extern void _rtw_scan_timeout_handler(void* FunctionContext); ++#endif ++ ++extern void rtw_free_network_queue(_adapter *adapter,u8 isfreeall); ++extern int rtw_init_mlme_priv(_adapter *adapter);// (struct mlme_priv *pmlmepriv); ++ ++extern void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv); ++ ++ ++extern sint rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv); ++extern sint rtw_set_key(_adapter *adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx); ++extern sint rtw_set_auth(_adapter *adapter,struct security_priv *psecuritypriv); ++ ++__inline static u8 *get_bssid(struct mlme_priv *pmlmepriv) ++{ //if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid ++ // if adhoc_mode:pmlmepriv->cur_network.network.MacAddress=> ibss mac address ++ return pmlmepriv->cur_network.network.MacAddress; ++} ++ ++__inline static sint check_fwstate(struct mlme_priv *pmlmepriv, sint state) ++{ ++ if (pmlmepriv->fw_state & state) ++ return _TRUE; ++ ++ return _FALSE; ++} ++ ++__inline static sint get_fwstate(struct mlme_priv *pmlmepriv) ++{ ++ return pmlmepriv->fw_state; ++} ++ ++/* ++ * No Limit on the calling context, ++ * therefore set it to be the critical section... ++ * ++ * ### NOTE:#### (!!!!) ++ * MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock ++ */ ++__inline static void set_fwstate(struct mlme_priv *pmlmepriv, sint state) ++{ ++ pmlmepriv->fw_state |= state; ++} ++ ++__inline static void _clr_fwstate_(struct mlme_priv *pmlmepriv, sint state) ++{ ++ pmlmepriv->fw_state &= ~state; ++} ++ ++/* ++ * No Limit on the calling context, ++ * therefore set it to be the critical section... ++ */ ++__inline static void clr_fwstate(struct mlme_priv *pmlmepriv, sint state) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ if (check_fwstate(pmlmepriv, state) == _TRUE) ++ pmlmepriv->fw_state ^= state; ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++__inline static void clr_fwstate_ex(struct mlme_priv *pmlmepriv, sint state) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _clr_fwstate_(pmlmepriv, state); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++__inline static void up_scanned_network(struct mlme_priv *pmlmepriv) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ pmlmepriv->num_of_scanned++; ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++#ifdef CONFIG_CONCURRENT_MODE ++sint rtw_buddy_adapter_up(_adapter *padapter); ++sint check_buddy_fwstate(_adapter *padapter, sint state); ++#endif //CONFIG_CONCURRENT_MODE ++ ++__inline static void down_scanned_network(struct mlme_priv *pmlmepriv) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ pmlmepriv->num_of_scanned--; ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++__inline static void set_scanned_network_val(struct mlme_priv *pmlmepriv, sint val) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ pmlmepriv->num_of_scanned = val; ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++} ++ ++extern u16 rtw_get_capability(WLAN_BSSID_EX *bss); ++extern void rtw_update_scanned_network(_adapter *adapter, WLAN_BSSID_EX *target); ++extern void rtw_disconnect_hdl_under_linked(_adapter* adapter, struct sta_info *psta, u8 free_assoc); ++extern void rtw_generate_random_ibss(u8 *pibss); ++extern struct wlan_network* rtw_find_network(_queue *scanned_queue, u8 *addr); ++extern struct wlan_network* rtw_get_oldest_wlan_network(_queue *scanned_queue); ++ ++extern void rtw_free_assoc_resources(_adapter* adapter, int lock_scanned_queue); ++extern void rtw_indicate_disconnect(_adapter* adapter); ++extern void rtw_indicate_connect(_adapter* adapter); ++void rtw_indicate_scan_done( _adapter *padapter, bool aborted); ++void rtw_scan_abort(_adapter *adapter); ++ ++extern int rtw_restruct_sec_ie(_adapter *adapter,u8 *in_ie,u8 *out_ie,uint in_len); ++extern int rtw_restruct_wmm_ie(_adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len, uint initial_out_len); ++extern void rtw_init_registrypriv_dev_network(_adapter *adapter); ++ ++extern void rtw_update_registrypriv_dev_network(_adapter *adapter); ++ ++extern void rtw_get_encrypt_decrypt_from_registrypriv(_adapter *adapter); ++ ++extern void _rtw_join_timeout_handler(_adapter *adapter); ++extern void rtw_scan_timeout_handler(_adapter *adapter); ++ ++extern void rtw_dynamic_check_timer_handlder(_adapter *adapter); ++#ifdef CONFIG_SET_SCAN_DENY_TIMER ++bool rtw_is_scan_deny(_adapter *adapter); ++void rtw_clear_scan_deny(_adapter *adapter); ++void rtw_set_scan_deny_timer_hdl(_adapter *adapter); ++void rtw_set_scan_deny(_adapter *adapter, u32 ms); ++#else ++#define rtw_is_scan_deny(adapter) _FALSE ++#define rtw_clear_scan_deny(adapter) do {} while (0) ++#define rtw_set_scan_deny_timer_hdl(adapter) do {} while (0) ++#define rtw_set_scan_deny(adapter, ms) do {} while (0) ++#endif ++ ++ ++extern int _rtw_init_mlme_priv(_adapter *padapter); ++ ++void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv); ++ ++extern void _rtw_free_mlme_priv(struct mlme_priv *pmlmepriv); ++ ++extern int _rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork); ++ ++extern struct wlan_network* _rtw_dequeue_network(_queue *queue); ++ ++extern struct wlan_network* _rtw_alloc_network(struct mlme_priv *pmlmepriv); ++ ++ ++extern void _rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork, u8 isfreeall); ++extern void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork); ++ ++ ++extern struct wlan_network* _rtw_find_network(_queue *scanned_queue, u8 *addr); ++ ++extern void _rtw_free_network_queue(_adapter* padapter, u8 isfreeall); ++ ++extern sint rtw_if_up(_adapter *padapter); ++ ++ ++u8 *rtw_get_capability_from_ie(u8 *ie); ++u8 *rtw_get_timestampe_from_ie(u8 *ie); ++u8 *rtw_get_beacon_interval_from_ie(u8 *ie); ++ ++ ++void rtw_joinbss_reset(_adapter *padapter); ++ ++#ifdef CONFIG_80211N_HT ++unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel); ++void rtw_update_ht_cap(_adapter *padapter, u8 *pie, uint ie_len, u8 channel); ++void rtw_issue_addbareq_cmd(_adapter *padapter, struct xmit_frame *pxmitframe); ++#endif ++ ++int rtw_is_same_ibss(_adapter *adapter, struct wlan_network *pnetwork); ++int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst); ++ ++#ifdef CONFIG_LAYER2_ROAMING ++void _rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network); ++void rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network); ++void rtw_set_roaming(_adapter *adapter, u8 to_roaming); ++u8 rtw_to_roaming(_adapter *adapter); ++#else ++#define _rtw_roaming(adapter, tgt_network) do {} while(0) ++#define rtw_roaming(adapter, tgt_network) do {} while(0) ++#define rtw_set_roaming(adapter, to_roaming) do {} while(0) ++#define rtw_to_roaming(adapter) 0 ++#endif ++ ++ ++#ifdef CONFIG_INTEL_PROXIM ++void rtw_proxim_enable(_adapter *padapter); ++void rtw_proxim_disable(_adapter *padapter); ++void rtw_proxim_send_packet(_adapter *padapter,u8 *pbuf,u16 len,u8 hw_rate); ++#endif //CONFIG_INTEL_PROXIM ++#endif //__RTL871X_MLME_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme_ext.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme_ext.h +new file mode 100644 +index 000000000000..440324436f04 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mlme_ext.h +@@ -0,0 +1,962 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_MLME_EXT_H_ ++#define __RTW_MLME_EXT_H_ ++ ++#include ++#include ++#include ++#include ++ ++ ++// Commented by Albert 20101105 ++// Increase the SURVEY_TO value from 100 to 150 ( 100ms to 150ms ) ++// The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request. ++// So, this driver tried to extend the dwell time for each scanning channel. ++// This will increase the chance to receive the probe response from SoftAP. ++ ++#define SURVEY_TO (100) ++#define REAUTH_TO (300) //(50) ++#define REASSOC_TO (300) //(50) ++//#define DISCONNECT_TO (3000) ++#define ADDBA_TO (2000) ++ ++#define LINKED_TO (1) //unit:2 sec, 1x2=2 sec ++ ++#define REAUTH_LIMIT (4) ++#define REASSOC_LIMIT (4) ++#define READDBA_LIMIT (2) ++ ++//#define IOCMD_REG0 0x10250370 ++//#define IOCMD_REG1 0x10250374 ++//#define IOCMD_REG2 0x10250378 ++ ++//#define FW_DYNAMIC_FUN_SWITCH 0x10250364 ++ ++//#define WRITE_BB_CMD 0xF0000001 ++//#define SET_CHANNEL_CMD 0xF3000000 ++//#define UPDATE_RA_CMD 0xFD0000A2 ++ ++#define DYNAMIC_FUNC_DISABLE (0x0) ++#define DYNAMIC_FUNC_DIG BIT(0) ++#define DYNAMIC_FUNC_HP BIT(1) ++#define DYNAMIC_FUNC_SS BIT(2) //Tx Power Tracking ++#define DYNAMIC_FUNC_BT BIT(3) ++#define DYNAMIC_FUNC_ANT_DIV BIT(4) ++#define DYNAMIC_FUNC_ADAPTIVITY BIT(5) ++ ++#define _HW_STATE_NOLINK_ 0x00 ++#define _HW_STATE_ADHOC_ 0x01 ++#define _HW_STATE_STATION_ 0x02 ++#define _HW_STATE_AP_ 0x03 ++ ++ ++#define _1M_RATE_ 0 ++#define _2M_RATE_ 1 ++#define _5M_RATE_ 2 ++#define _11M_RATE_ 3 ++#define _6M_RATE_ 4 ++#define _9M_RATE_ 5 ++#define _12M_RATE_ 6 ++#define _18M_RATE_ 7 ++#define _24M_RATE_ 8 ++#define _36M_RATE_ 9 ++#define _48M_RATE_ 10 ++#define _54M_RATE_ 11 ++ ++ ++extern unsigned char RTW_WPA_OUI[]; ++extern unsigned char WMM_OUI[]; ++extern unsigned char WPS_OUI[]; ++extern unsigned char WFD_OUI[]; ++extern unsigned char P2P_OUI[]; ++ ++extern unsigned char WMM_INFO_OUI[]; ++extern unsigned char WMM_PARA_OUI[]; ++ ++ ++// ++// Channel Plan Type. ++// Note: ++// We just add new channel plan when the new channel plan is different from any of the following ++// channel plan. ++// If you just wnat to customize the acitions(scan period or join actions) about one of the channel plan, ++// customize them in RT_CHANNEL_INFO in the RT_CHANNEL_LIST. ++// ++typedef enum _RT_CHANNEL_DOMAIN ++{ ++ //===== old channel plan mapping =====// ++ RT_CHANNEL_DOMAIN_FCC = 0x00, ++ RT_CHANNEL_DOMAIN_IC = 0x01, ++ RT_CHANNEL_DOMAIN_ETSI = 0x02, ++ RT_CHANNEL_DOMAIN_SPAIN = 0x03, ++ RT_CHANNEL_DOMAIN_FRANCE = 0x04, ++ RT_CHANNEL_DOMAIN_MKK = 0x05, ++ RT_CHANNEL_DOMAIN_MKK1 = 0x06, ++ RT_CHANNEL_DOMAIN_ISRAEL = 0x07, ++ RT_CHANNEL_DOMAIN_TELEC = 0x08, ++ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 0x09, ++ RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 0x0A, ++ RT_CHANNEL_DOMAIN_TAIWAN = 0x0B, ++ RT_CHANNEL_DOMAIN_CHINA = 0x0C, ++ RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO = 0x0D, ++ RT_CHANNEL_DOMAIN_KOREA = 0x0E, ++ RT_CHANNEL_DOMAIN_TURKEY = 0x0F, ++ RT_CHANNEL_DOMAIN_JAPAN = 0x10, ++ RT_CHANNEL_DOMAIN_FCC_NO_DFS = 0x11, ++ RT_CHANNEL_DOMAIN_JAPAN_NO_DFS = 0x12, ++ RT_CHANNEL_DOMAIN_WORLD_WIDE_5G = 0x13, ++ RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS = 0x14, ++ ++ //===== new channel plan mapping, (2GDOMAIN_5GDOMAIN) =====// ++ RT_CHANNEL_DOMAIN_WORLD_NULL = 0x20, ++ RT_CHANNEL_DOMAIN_ETSI1_NULL = 0x21, ++ RT_CHANNEL_DOMAIN_FCC1_NULL = 0x22, ++ RT_CHANNEL_DOMAIN_MKK1_NULL = 0x23, ++ RT_CHANNEL_DOMAIN_ETSI2_NULL = 0x24, ++ RT_CHANNEL_DOMAIN_FCC1_FCC1 = 0x25, ++ RT_CHANNEL_DOMAIN_WORLD_ETSI1 = 0x26, ++ RT_CHANNEL_DOMAIN_MKK1_MKK1 = 0x27, ++ RT_CHANNEL_DOMAIN_WORLD_KCC1 = 0x28, ++ RT_CHANNEL_DOMAIN_WORLD_FCC2 = 0x29, ++ RT_CHANNEL_DOMAIN_WORLD_FCC3 = 0x30, ++ RT_CHANNEL_DOMAIN_WORLD_FCC4 = 0x31, ++ RT_CHANNEL_DOMAIN_WORLD_FCC5 = 0x32, ++ RT_CHANNEL_DOMAIN_WORLD_FCC6 = 0x33, ++ RT_CHANNEL_DOMAIN_FCC1_FCC7 = 0x34, ++ RT_CHANNEL_DOMAIN_WORLD_ETSI2 = 0x35, ++ RT_CHANNEL_DOMAIN_WORLD_ETSI3 = 0x36, ++ RT_CHANNEL_DOMAIN_MKK1_MKK2 = 0x37, ++ RT_CHANNEL_DOMAIN_MKK1_MKK3 = 0x38, ++ RT_CHANNEL_DOMAIN_FCC1_NCC1 = 0x39, ++ RT_CHANNEL_DOMAIN_FCC1_NCC2 = 0x40, ++ ++ //===== Add new channel plan above this line===============// ++ RT_CHANNEL_DOMAIN_MAX, ++ RT_CHANNEL_DOMAIN_REALTEK_DEFINE = 0x7F, ++}RT_CHANNEL_DOMAIN, *PRT_CHANNEL_DOMAIN; ++ ++typedef enum _RT_CHANNEL_DOMAIN_2G ++{ ++ RT_CHANNEL_DOMAIN_2G_WORLD = 0x00, //Worldwird 13 ++ RT_CHANNEL_DOMAIN_2G_ETSI1 = 0x01, //Europe ++ RT_CHANNEL_DOMAIN_2G_FCC1 = 0x02, //US ++ RT_CHANNEL_DOMAIN_2G_MKK1 = 0x03, //Japan ++ RT_CHANNEL_DOMAIN_2G_ETSI2 = 0x04, //France ++ RT_CHANNEL_DOMAIN_2G_NULL = 0x05, ++ //===== Add new channel plan above this line===============// ++ RT_CHANNEL_DOMAIN_2G_MAX, ++}RT_CHANNEL_DOMAIN_2G, *PRT_CHANNEL_DOMAIN_2G; ++ ++typedef enum _RT_CHANNEL_DOMAIN_5G ++{ ++ RT_CHANNEL_DOMAIN_5G_NULL = 0x00, ++ RT_CHANNEL_DOMAIN_5G_ETSI1 = 0x01, //Europe ++ RT_CHANNEL_DOMAIN_5G_ETSI2 = 0x02, //Australia, New Zealand ++ RT_CHANNEL_DOMAIN_5G_ETSI3 = 0x03, //Russia ++ RT_CHANNEL_DOMAIN_5G_FCC1 = 0x04, //US ++ RT_CHANNEL_DOMAIN_5G_FCC2 = 0x05, //FCC o/w DFS Channels ++ RT_CHANNEL_DOMAIN_5G_FCC3 = 0x06, //India, Mexico ++ RT_CHANNEL_DOMAIN_5G_FCC4 = 0x07, //Venezuela ++ RT_CHANNEL_DOMAIN_5G_FCC5 = 0x08, //China ++ RT_CHANNEL_DOMAIN_5G_FCC6 = 0x09, //Israel ++ RT_CHANNEL_DOMAIN_5G_FCC7_IC1 = 0x0A, //US, Canada ++ RT_CHANNEL_DOMAIN_5G_KCC1 = 0x0B, //Korea ++ RT_CHANNEL_DOMAIN_5G_MKK1 = 0x0C, //Japan ++ RT_CHANNEL_DOMAIN_5G_MKK2 = 0x0D, //Japan (W52, W53) ++ RT_CHANNEL_DOMAIN_5G_MKK3 = 0x0E, //Japan (W56) ++ RT_CHANNEL_DOMAIN_5G_NCC1 = 0x0F, //Taiwan ++ RT_CHANNEL_DOMAIN_5G_NCC2 = 0x10, //Taiwan o/w DFS ++ //===== Add new channel plan above this line===============// ++ //===== Driver Self Defined =====// ++ RT_CHANNEL_DOMAIN_5G_FCC = 0x11, ++ RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS = 0x12, ++ RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS = 0x13, ++ RT_CHANNEL_DOMAIN_5G_MAX, ++}RT_CHANNEL_DOMAIN_5G, *PRT_CHANNEL_DOMAIN_5G; ++ ++#define rtw_is_channel_plan_valid(chplan) (chplansurvey_timer, (ms)); \ ++ } while(0) ++ ++#define set_link_timer(mlmeext, ms) \ ++ do { \ ++ /*DBG_871X("%s set_link_timer(%p, %d)\n", __FUNCTION__, (mlmeext), (ms));*/ \ ++ _set_timer(&(mlmeext)->link_timer, (ms)); \ ++ } while(0) ++#ifdef CONFIG_IEEE80211W ++#define set_sa_query_timer(mlmeext, ms) \ ++ do { \ ++ DBG_871X("%s set_sa_query_timer(%p, %d)\n", __FUNCTION__, (mlmeext), (ms)); \ ++ _set_timer(&(mlmeext)->sa_query_timer, (ms)); \ ++ } while(0) ++#endif //CONFIG_IEEE80211W ++extern int cckrates_included(unsigned char *rate, int ratelen); ++extern int cckratesonly_included(unsigned char *rate, int ratelen); ++ ++extern void process_addba_req(_adapter *padapter, u8 *paddba_req, u8 *addr); ++ ++extern void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len); ++extern void correct_TSF(_adapter *padapter, struct mlme_ext_priv *pmlmeext); ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ sint check_buddy_mlmeinfo_state(_adapter *padapter, u32 state); ++void concurrent_chk_joinbss_done(_adapter *padapter, int join_res); ++#endif //CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++void dc_SelectChannel(_adapter *padapter, unsigned char channel); ++void dc_SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset); ++void dc_set_channel_bwmode_disconnect(_adapter *padapter); ++u8 dc_handle_join_request(_adapter *padapter); ++void dc_handle_join_done(_adapter *padapter, u8 join_res); ++sint dc_check_fwstate(_adapter *padapter, sint fw_state); ++u8 dc_handle_site_survey(_adapter *padapter); ++void dc_report_survey_event(_adapter *padapter, union recv_frame *precv_frame); ++void dc_set_channel_bwmode_survey_done(_adapter *padapter); ++void dc_set_ap_channel_bandwidth(_adapter *padapter, u8 channel, u8 channel_offset, u8 bwmode); ++void dc_resume_xmit(_adapter *padapter); ++u8 dc_check_xmit(_adapter *padapter); ++#endif ++ ++int rtw_chk_start_clnt_join(_adapter *padapter); ++int rtw_get_ch_setting_union(_adapter *adapter, u8 *ch, u8 *bw, u8 *offset); ++ ++struct cmd_hdl { ++ uint parmsize; ++ u8 (*h2cfuns)(struct _ADAPTER *padapter, u8 *pbuf); ++}; ++ ++ ++u8 read_macreg_hdl(_adapter *padapter, u8 *pbuf); ++u8 write_macreg_hdl(_adapter *padapter, u8 *pbuf); ++u8 read_bbreg_hdl(_adapter *padapter, u8 *pbuf); ++u8 write_bbreg_hdl(_adapter *padapter, u8 *pbuf); ++u8 read_rfreg_hdl(_adapter *padapter, u8 *pbuf); ++u8 write_rfreg_hdl(_adapter *padapter, u8 *pbuf); ++ ++ ++u8 NULL_hdl(_adapter *padapter, u8 *pbuf); ++u8 join_cmd_hdl(_adapter *padapter, u8 *pbuf); ++u8 disconnect_hdl(_adapter *padapter, u8 *pbuf); ++u8 createbss_hdl(_adapter *padapter, u8 *pbuf); ++u8 setopmode_hdl(_adapter *padapter, u8 *pbuf); ++u8 sitesurvey_cmd_hdl(_adapter *padapter, u8 *pbuf); ++u8 setauth_hdl(_adapter *padapter, u8 *pbuf); ++u8 setkey_hdl(_adapter *padapter, u8 *pbuf); ++u8 set_stakey_hdl(_adapter *padapter, u8 *pbuf); ++u8 set_assocsta_hdl(_adapter *padapter, u8 *pbuf); ++u8 del_assocsta_hdl(_adapter *padapter, u8 *pbuf); ++u8 add_ba_hdl(_adapter *padapter, unsigned char *pbuf); ++ ++u8 mlme_evt_hdl(_adapter *padapter, unsigned char *pbuf); ++u8 h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf); ++u8 tx_beacon_hdl(_adapter *padapter, unsigned char *pbuf); ++u8 set_ch_hdl(_adapter *padapter, u8 *pbuf); ++u8 set_chplan_hdl(_adapter *padapter, unsigned char *pbuf); ++u8 led_blink_hdl(_adapter *padapter, unsigned char *pbuf); ++u8 set_csa_hdl(_adapter *padapter, unsigned char *pbuf); //Kurt: Handling DFS channel switch announcement ie. ++u8 tdls_hdl(_adapter *padapter, unsigned char *pbuf); ++ ++ ++#define GEN_DRV_CMD_HANDLER(size, cmd) {size, &cmd ## _hdl}, ++#define GEN_MLME_EXT_HANDLER(size, cmd) {size, cmd}, ++ ++#ifdef _RTW_CMD_C_ ++ ++struct cmd_hdl wlancmds[] = ++{ ++ GEN_DRV_CMD_HANDLER(0, NULL) /*0*/ ++ GEN_DRV_CMD_HANDLER(0, NULL) ++ GEN_DRV_CMD_HANDLER(0, NULL) ++ GEN_DRV_CMD_HANDLER(0, NULL) ++ GEN_DRV_CMD_HANDLER(0, NULL) ++ GEN_DRV_CMD_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) /*10*/ ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct joinbss_parm), join_cmd_hdl) /*14*/ ++ GEN_MLME_EXT_HANDLER(sizeof (struct disconnect_parm), disconnect_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof (struct createbss_parm), createbss_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setopmode_parm), setopmode_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof (struct sitesurvey_parm), sitesurvey_cmd_hdl) /*18*/ ++ GEN_MLME_EXT_HANDLER(sizeof (struct setauth_parm), setauth_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setkey_parm), setkey_hdl) /*20*/ ++ GEN_MLME_EXT_HANDLER(sizeof (struct set_stakey_parm), set_stakey_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof (struct set_assocsta_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct del_assocsta_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setstapwrstate_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setbasicrate_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct getbasicrate_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setdatarate_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct getdatarate_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct setphyinfo_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct getphyinfo_parm), NULL) /*30*/ ++ GEN_MLME_EXT_HANDLER(sizeof (struct setphy_parm), NULL) ++ GEN_MLME_EXT_HANDLER(sizeof (struct getphy_parm), NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) /*40*/ ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(sizeof(struct addBaReq_parm), add_ba_hdl) ++ GEN_MLME_EXT_HANDLER(sizeof(struct set_ch_parm), set_ch_hdl) /* 46 */ ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) /*50*/ ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(0, NULL) ++ GEN_MLME_EXT_HANDLER(sizeof(struct Tx_Beacon_param), tx_beacon_hdl) /*55*/ ++ ++ GEN_MLME_EXT_HANDLER(0, mlme_evt_hdl) /*56*/ ++ GEN_MLME_EXT_HANDLER(0, rtw_drvextra_cmd_hdl) /*57*/ ++ ++ GEN_MLME_EXT_HANDLER(0, h2c_msg_hdl) /*58*/ ++ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelPlan_param), set_chplan_hdl) /*59*/ ++ GEN_MLME_EXT_HANDLER(sizeof(struct LedBlink_param), led_blink_hdl) /*60*/ ++ GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelSwitch_param), set_csa_hdl) /*61*/ ++ GEN_MLME_EXT_HANDLER(sizeof(struct TDLSoption_param), tdls_hdl) /*62*/ ++}; ++ ++#endif ++ ++struct C2HEvent_Header ++{ ++ ++#ifdef CONFIG_LITTLE_ENDIAN ++ ++ unsigned int len:16; ++ unsigned int ID:8; ++ unsigned int seq:8; ++ ++#elif defined(CONFIG_BIG_ENDIAN) ++ ++ unsigned int seq:8; ++ unsigned int ID:8; ++ unsigned int len:16; ++ ++#else ++ ++# error "Must be LITTLE or BIG Endian" ++ ++#endif ++ ++ unsigned int rsvd; ++ ++}; ++ ++void rtw_dummy_event_callback(_adapter *adapter , u8 *pbuf); ++void rtw_fwdbg_event_callback(_adapter *adapter , u8 *pbuf); ++ ++enum rtw_c2h_event ++{ ++ GEN_EVT_CODE(_Read_MACREG)=0, /*0*/ ++ GEN_EVT_CODE(_Read_BBREG), ++ GEN_EVT_CODE(_Read_RFREG), ++ GEN_EVT_CODE(_Read_EEPROM), ++ GEN_EVT_CODE(_Read_EFUSE), ++ GEN_EVT_CODE(_Read_CAM), /*5*/ ++ GEN_EVT_CODE(_Get_BasicRate), ++ GEN_EVT_CODE(_Get_DataRate), ++ GEN_EVT_CODE(_Survey), /*8*/ ++ GEN_EVT_CODE(_SurveyDone), /*9*/ ++ ++ GEN_EVT_CODE(_JoinBss) , /*10*/ ++ GEN_EVT_CODE(_AddSTA), ++ GEN_EVT_CODE(_DelSTA), ++ GEN_EVT_CODE(_AtimDone) , ++ GEN_EVT_CODE(_TX_Report), ++ GEN_EVT_CODE(_CCX_Report), /*15*/ ++ GEN_EVT_CODE(_DTM_Report), ++ GEN_EVT_CODE(_TX_Rate_Statistics), ++ GEN_EVT_CODE(_C2HLBK), ++ GEN_EVT_CODE(_FWDBG), ++ GEN_EVT_CODE(_C2HFEEDBACK), /*20*/ ++ GEN_EVT_CODE(_ADDBA), ++ GEN_EVT_CODE(_C2HBCN), ++ GEN_EVT_CODE(_ReportPwrState), //filen: only for PCIE, USB ++ GEN_EVT_CODE(_CloseRF), //filen: only for PCIE, work around ASPM ++ MAX_C2HEVT ++}; ++ ++ ++#ifdef _RTW_MLME_EXT_C_ ++ ++static struct fwevent wlanevents[] = ++{ ++ {0, rtw_dummy_event_callback}, /*0*/ ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, &rtw_survey_event_callback}, /*8*/ ++ {sizeof (struct surveydone_event), &rtw_surveydone_event_callback}, /*9*/ ++ ++ {0, &rtw_joinbss_event_callback}, /*10*/ ++ {sizeof(struct stassoc_event), &rtw_stassoc_event_callback}, ++ {sizeof(struct stadel_event), &rtw_stadel_event_callback}, ++ {0, &rtw_atimdone_event_callback}, ++ {0, rtw_dummy_event_callback}, ++ {0, NULL}, /*15*/ ++ {0, NULL}, ++ {0, NULL}, ++ {0, NULL}, ++ {0, rtw_fwdbg_event_callback}, ++ {0, NULL}, /*20*/ ++ {0, NULL}, ++ {0, NULL}, ++ {0, &rtw_cpwm_event_callback}, ++}; ++ ++#endif//_RTL8192C_CMD_C_ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp.h +new file mode 100644 +index 000000000000..06d43b5b6ec4 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp.h +@@ -0,0 +1,711 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_MP_H_ ++#define _RTW_MP_H_ ++ ++#ifndef PLATFORM_WINDOWS ++// 00 - Success ++// 11 - Error ++#define STATUS_SUCCESS (0x00000000L) ++#define STATUS_PENDING (0x00000103L) ++ ++#define STATUS_UNSUCCESSFUL (0xC0000001L) ++#define STATUS_INSUFFICIENT_RESOURCES (0xC000009AL) ++#define STATUS_NOT_SUPPORTED (0xC00000BBL) ++ ++#define NDIS_STATUS_SUCCESS ((NDIS_STATUS)STATUS_SUCCESS) ++#define NDIS_STATUS_PENDING ((NDIS_STATUS)STATUS_PENDING) ++#define NDIS_STATUS_NOT_RECOGNIZED ((NDIS_STATUS)0x00010001L) ++#define NDIS_STATUS_NOT_COPIED ((NDIS_STATUS)0x00010002L) ++#define NDIS_STATUS_NOT_ACCEPTED ((NDIS_STATUS)0x00010003L) ++#define NDIS_STATUS_CALL_ACTIVE ((NDIS_STATUS)0x00010007L) ++ ++#define NDIS_STATUS_FAILURE ((NDIS_STATUS)STATUS_UNSUCCESSFUL) ++#define NDIS_STATUS_RESOURCES ((NDIS_STATUS)STATUS_INSUFFICIENT_RESOURCES) ++#define NDIS_STATUS_CLOSING ((NDIS_STATUS)0xC0010002L) ++#define NDIS_STATUS_BAD_VERSION ((NDIS_STATUS)0xC0010004L) ++#define NDIS_STATUS_BAD_CHARACTERISTICS ((NDIS_STATUS)0xC0010005L) ++#define NDIS_STATUS_ADAPTER_NOT_FOUND ((NDIS_STATUS)0xC0010006L) ++#define NDIS_STATUS_OPEN_FAILED ((NDIS_STATUS)0xC0010007L) ++#define NDIS_STATUS_DEVICE_FAILED ((NDIS_STATUS)0xC0010008L) ++#define NDIS_STATUS_MULTICAST_FULL ((NDIS_STATUS)0xC0010009L) ++#define NDIS_STATUS_MULTICAST_EXISTS ((NDIS_STATUS)0xC001000AL) ++#define NDIS_STATUS_MULTICAST_NOT_FOUND ((NDIS_STATUS)0xC001000BL) ++#define NDIS_STATUS_REQUEST_ABORTED ((NDIS_STATUS)0xC001000CL) ++#define NDIS_STATUS_RESET_IN_PROGRESS ((NDIS_STATUS)0xC001000DL) ++#define NDIS_STATUS_CLOSING_INDICATING ((NDIS_STATUS)0xC001000EL) ++#define NDIS_STATUS_NOT_SUPPORTED ((NDIS_STATUS)STATUS_NOT_SUPPORTED) ++#define NDIS_STATUS_INVALID_PACKET ((NDIS_STATUS)0xC001000FL) ++#define NDIS_STATUS_OPEN_LIST_FULL ((NDIS_STATUS)0xC0010010L) ++#define NDIS_STATUS_ADAPTER_NOT_READY ((NDIS_STATUS)0xC0010011L) ++#define NDIS_STATUS_ADAPTER_NOT_OPEN ((NDIS_STATUS)0xC0010012L) ++#define NDIS_STATUS_NOT_INDICATING ((NDIS_STATUS)0xC0010013L) ++#define NDIS_STATUS_INVALID_LENGTH ((NDIS_STATUS)0xC0010014L) ++#define NDIS_STATUS_INVALID_DATA ((NDIS_STATUS)0xC0010015L) ++#define NDIS_STATUS_BUFFER_TOO_SHORT ((NDIS_STATUS)0xC0010016L) ++#define NDIS_STATUS_INVALID_OID ((NDIS_STATUS)0xC0010017L) ++#define NDIS_STATUS_ADAPTER_REMOVED ((NDIS_STATUS)0xC0010018L) ++#define NDIS_STATUS_UNSUPPORTED_MEDIA ((NDIS_STATUS)0xC0010019L) ++#define NDIS_STATUS_GROUP_ADDRESS_IN_USE ((NDIS_STATUS)0xC001001AL) ++#define NDIS_STATUS_FILE_NOT_FOUND ((NDIS_STATUS)0xC001001BL) ++#define NDIS_STATUS_ERROR_READING_FILE ((NDIS_STATUS)0xC001001CL) ++#define NDIS_STATUS_ALREADY_MAPPED ((NDIS_STATUS)0xC001001DL) ++#define NDIS_STATUS_RESOURCE_CONFLICT ((NDIS_STATUS)0xC001001EL) ++#define NDIS_STATUS_NO_CABLE ((NDIS_STATUS)0xC001001FL) ++ ++#define NDIS_STATUS_INVALID_SAP ((NDIS_STATUS)0xC0010020L) ++#define NDIS_STATUS_SAP_IN_USE ((NDIS_STATUS)0xC0010021L) ++#define NDIS_STATUS_INVALID_ADDRESS ((NDIS_STATUS)0xC0010022L) ++#define NDIS_STATUS_VC_NOT_ACTIVATED ((NDIS_STATUS)0xC0010023L) ++#define NDIS_STATUS_DEST_OUT_OF_ORDER ((NDIS_STATUS)0xC0010024L) // cause 27 ++#define NDIS_STATUS_VC_NOT_AVAILABLE ((NDIS_STATUS)0xC0010025L) // cause 35,45 ++#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE ((NDIS_STATUS)0xC0010026L) // cause 37 ++#define NDIS_STATUS_INCOMPATABLE_QOS ((NDIS_STATUS)0xC0010027L) // cause 49 ++#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED ((NDIS_STATUS)0xC0010028L) // cause 93 ++#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION ((NDIS_STATUS)0xC0010029L) // cause 3 ++#endif /* #ifndef PLATFORM_WINDOWS */ ++ ++#if 0 ++#define MPT_NOOP 0 ++#define MPT_READ_MAC_1BYTE 1 ++#define MPT_READ_MAC_2BYTE 2 ++#define MPT_READ_MAC_4BYTE 3 ++#define MPT_WRITE_MAC_1BYTE 4 ++#define MPT_WRITE_MAC_2BYTE 5 ++#define MPT_WRITE_MAC_4BYTE 6 ++#define MPT_READ_BB_CCK 7 ++#define MPT_WRITE_BB_CCK 8 ++#define MPT_READ_BB_OFDM 9 ++#define MPT_WRITE_BB_OFDM 10 ++#define MPT_READ_RF 11 ++#define MPT_WRITE_RF 12 ++#define MPT_READ_EEPROM_1BYTE 13 ++#define MPT_WRITE_EEPROM_1BYTE 14 ++#define MPT_READ_EEPROM_2BYTE 15 ++#define MPT_WRITE_EEPROM_2BYTE 16 ++#define MPT_SET_CSTHRESHOLD 21 ++#define MPT_SET_INITGAIN 22 ++#define MPT_SWITCH_BAND 23 ++#define MPT_SWITCH_CHANNEL 24 ++#define MPT_SET_DATARATE 25 ++#define MPT_SWITCH_ANTENNA 26 ++#define MPT_SET_TX_POWER 27 ++#define MPT_SET_CONT_TX 28 ++#define MPT_SET_SINGLE_CARRIER 29 ++#define MPT_SET_CARRIER_SUPPRESSION 30 ++#define MPT_GET_RATE_TABLE 31 ++#define MPT_READ_TSSI 32 ++#define MPT_GET_THERMAL_METER 33 ++#endif ++ ++#define MAX_MP_XMITBUF_SZ 2048 ++#define NR_MP_XMITFRAME 8 ++ ++struct mp_xmit_frame ++{ ++ _list list; ++ ++ struct pkt_attrib attrib; ++ ++ _pkt *pkt; ++ ++ int frame_tag; ++ ++ _adapter *padapter; ++ ++#ifdef CONFIG_USB_HCI ++ ++ //insert urb, irp, and irpcnt info below... ++ //max frag_cnt = 8 ++ ++ u8 *mem_addr; ++ u32 sz[8]; ++ ++#if defined(PLATFORM_OS_XP) || defined(PLATFORM_LINUX) ++ PURB pxmit_urb[8]; ++#endif ++ ++#ifdef PLATFORM_OS_XP ++ PIRP pxmit_irp[8]; ++#endif ++ ++ u8 bpending[8]; ++ sint ac_tag[8]; ++ sint last[8]; ++ uint irpcnt; ++ uint fragcnt; ++#endif /* CONFIG_USB_HCI */ ++ ++ uint mem[(MAX_MP_XMITBUF_SZ >> 2)]; ++}; ++ ++struct mp_wiparam ++{ ++ u32 bcompleted; ++ u32 act_type; ++ u32 io_offset; ++ u32 io_value; ++}; ++ ++typedef void(*wi_act_func)(void* padapter); ++ ++#ifdef PLATFORM_WINDOWS ++struct mp_wi_cntx ++{ ++ u8 bmpdrv_unload; ++ ++ // Work Item ++ NDIS_WORK_ITEM mp_wi; ++ NDIS_EVENT mp_wi_evt; ++ _lock mp_wi_lock; ++ u8 bmp_wi_progress; ++ wi_act_func curractfunc; ++ // Variable needed in each implementation of CurrActFunc. ++ struct mp_wiparam param; ++}; ++#endif ++ ++struct mp_tx ++{ ++ u8 stop; ++ u32 count, sended; ++ u8 payload; ++ struct pkt_attrib attrib; ++ struct tx_desc desc; ++ u8 *pallocated_buf; ++ u8 *buf; ++ u32 buf_size, write_size; ++ _thread_hdl_ PktTxThread; ++}; ++ ++//#if (MP_DRIVER == 1) ++#if defined(CONFIG_RTL8192C) || defined(CONFIG_RTL8192D) || defined(CONFIG_RTL8723A) || defined(CONFIG_RTL8188E) ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++#ifdef CONFIG_RTL8192D ++#include ++#endif ++#ifdef CONFIG_RTL8723A ++#include ++#endif ++#ifdef CONFIG_RTL8188E ++#include ++#endif ++#define MP_MAX_LINES 1000 ++#define MP_MAX_LINES_BYTES 256 ++#define u1Byte u8 ++#define s1Byte s8 ++#define u4Byte u32 ++#define s4Byte s32 ++typedef VOID (*MPT_WORK_ITEM_HANDLER)(IN PVOID Adapter); ++typedef struct _MPT_CONTEXT ++{ ++ // Indicate if we have started Mass Production Test. ++ BOOLEAN bMassProdTest; ++ ++ // Indicate if the driver is unloading or unloaded. ++ BOOLEAN bMptDrvUnload; ++ ++ /* 8190 PCI does not support NDIS_WORK_ITEM. */ ++ // Work Item for Mass Production Test. ++ //NDIS_WORK_ITEM MptWorkItem; ++// RT_WORK_ITEM MptWorkItem; ++ // Event used to sync the case unloading driver and MptWorkItem is still in progress. ++// NDIS_EVENT MptWorkItemEvent; ++ // To protect the following variables. ++// NDIS_SPIN_LOCK MptWorkItemSpinLock; ++ // Indicate a MptWorkItem is scheduled and not yet finished. ++ BOOLEAN bMptWorkItemInProgress; ++ // An instance which implements function and context of MptWorkItem. ++ MPT_WORK_ITEM_HANDLER CurrMptAct; ++ ++ // 1=Start, 0=Stop from UI. ++ ULONG MptTestStart; ++ // _TEST_MODE, defined in MPT_Req2.h ++ ULONG MptTestItem; ++ // Variable needed in each implementation of CurrMptAct. ++ ULONG MptActType; // Type of action performed in CurrMptAct. ++ // The Offset of IO operation is depend of MptActType. ++ ULONG MptIoOffset; ++ // The Value of IO operation is depend of MptActType. ++ ULONG MptIoValue; ++ // The RfPath of IO operation is depend of MptActType. ++ ULONG MptRfPath; ++ ++ WIRELESS_MODE MptWirelessModeToSw; // Wireless mode to switch. ++ u8 MptChannelToSw; // Channel to switch. ++ u8 MptInitGainToSet; // Initial gain to set. ++ //ULONG bMptAntennaA; // TRUE if we want to use antenna A. ++ ULONG MptBandWidth; // bandwidth to switch. ++ ULONG MptRateIndex; // rate index. ++ // Register value kept for Single Carrier Tx test. ++ u8 btMpCckTxPower; ++ // Register value kept for Single Carrier Tx test. ++ u8 btMpOfdmTxPower; ++ // For MP Tx Power index ++ u8 TxPwrLevel[2]; // rf-A, rf-B ++ ++ // Content of RCR Regsiter for Mass Production Test. ++ ULONG MptRCR; ++ // TRUE if we only receive packets with specific pattern. ++ BOOLEAN bMptFilterPattern; ++ // Rx OK count, statistics used in Mass Production Test. ++ ULONG MptRxOkCnt; ++ // Rx CRC32 error count, statistics used in Mass Production Test. ++ ULONG MptRxCrcErrCnt; ++ ++ BOOLEAN bCckContTx; // TRUE if we are in CCK Continuous Tx test. ++ BOOLEAN bOfdmContTx; // TRUE if we are in OFDM Continuous Tx test. ++ BOOLEAN bStartContTx; // TRUE if we have start Continuous Tx test. ++ // TRUE if we are in Single Carrier Tx test. ++ BOOLEAN bSingleCarrier; ++ // TRUE if we are in Carrier Suppression Tx Test. ++ BOOLEAN bCarrierSuppression; ++ //TRUE if we are in Single Tone Tx test. ++ BOOLEAN bSingleTone; ++ ++ // ACK counter asked by K.Y.. ++ BOOLEAN bMptEnableAckCounter; ++ ULONG MptAckCounter; ++ ++ // SD3 Willis For 8192S to save 1T/2T RF table for ACUT Only fro ACUT delete later ~~~! ++ //s1Byte BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT]; ++ //s1Byte BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES]; ++ //s4Byte RfReadLine[2]; ++ ++ u8 APK_bound[2]; //for APK path A/path B ++ BOOLEAN bMptIndexEven; ++ ++ u8 backup0xc50; ++ u8 backup0xc58; ++ u8 backup0xc30; ++}MPT_CONTEXT, *PMPT_CONTEXT; ++#endif ++//#endif ++ ++/* E-Fuse */ ++#ifdef CONFIG_RTL8192D ++#define EFUSE_MAP_SIZE 255 ++#endif ++#ifdef CONFIG_RTL8192C ++#define EFUSE_MAP_SIZE 128 ++#endif ++#ifdef CONFIG_RTL8723A ++#define EFUSE_MAP_SIZE 256 ++#endif ++#ifdef CONFIG_RTL8188E ++#define EFUSE_MAP_SIZE 256 ++#endif ++#define EFUSE_MAX_SIZE 512 ++ ++/* end of E-Fuse */ ++ ++//#define RTPRIV_IOCTL_MP ( SIOCIWFIRSTPRIV + 0x17) ++enum { ++ WRITE_REG = 1, ++ READ_REG, ++ WRITE_RF, ++ READ_RF, ++ MP_START, ++ MP_STOP, ++ MP_RATE, ++ MP_CHANNEL, ++ MP_BANDWIDTH, ++ MP_TXPOWER, ++ MP_ANT_TX, ++ MP_ANT_RX, ++ MP_CTX, ++ MP_QUERY, ++ MP_ARX, ++ MP_PSD, ++ MP_PWRTRK, ++ MP_THER, ++ MP_IOCTL, ++ EFUSE_GET, ++ EFUSE_SET, ++ MP_RESET_STATS, ++ MP_DUMP, ++ MP_PHYPARA, ++ MP_NULL, ++}; ++ ++struct mp_priv ++{ ++ _adapter *papdater; ++ ++ //Testing Flag ++ u32 mode;//0 for normal type packet, 1 for loopback packet (16bytes TXCMD) ++ ++ u32 prev_fw_state; ++ ++ //OID cmd handler ++ struct mp_wiparam workparam; ++// u8 act_in_progress; ++ ++ //Tx Section ++ u8 TID; ++ u32 tx_pktcount; ++ struct mp_tx tx; ++ ++ //Rx Section ++ u32 rx_pktcount; ++ u32 rx_crcerrpktcount; ++ u32 rx_pktloss; ++ ++ struct recv_stat rxstat; ++ ++ //RF/BB relative ++ u8 channel; ++ u8 bandwidth; ++ u8 prime_channel_offset; ++ u8 txpoweridx; ++ u8 txpoweridx_b; ++ u8 rateidx; ++ u32 preamble; ++// u8 modem; ++ u32 CrystalCap; ++// u32 curr_crystalcap; ++ ++ u16 antenna_tx; ++ u16 antenna_rx; ++// u8 curr_rfpath; ++ ++ u8 check_mp_pkt; ++ ++// uint ForcedDataRate; ++ ++ struct wlan_network mp_network; ++ NDIS_802_11_MAC_ADDRESS network_macaddr; ++ ++#ifdef PLATFORM_WINDOWS ++ u32 rx_testcnt; ++ u32 rx_testcnt1; ++ u32 rx_testcnt2; ++ u32 tx_testcnt; ++ u32 tx_testcnt1; ++ ++ struct mp_wi_cntx wi_cntx; ++ ++ u8 h2c_result; ++ u8 h2c_seqnum; ++ u16 h2c_cmdcode; ++ u8 h2c_resp_parambuf[512]; ++ _lock h2c_lock; ++ _lock wkitm_lock; ++ u32 h2c_cmdcnt; ++ NDIS_EVENT h2c_cmd_evt; ++ NDIS_EVENT c2h_set; ++ NDIS_EVENT h2c_clr; ++ NDIS_EVENT cpwm_int; ++ ++ NDIS_EVENT scsir_full_evt; ++ NDIS_EVENT scsiw_empty_evt; ++#endif ++ ++ u8 *pallocated_mp_xmitframe_buf; ++ u8 *pmp_xmtframe_buf; ++ _queue free_mp_xmitqueue; ++ u32 free_mp_xmitframe_cnt; ++ ++ MPT_CONTEXT MptCtx; ++}; ++ ++typedef struct _IOCMD_STRUCT_ { ++ u8 cmdclass; ++ u16 value; ++ u8 index; ++}IOCMD_STRUCT; ++ ++struct rf_reg_param { ++ u32 path; ++ u32 offset; ++ u32 value; ++}; ++ ++struct bb_reg_param { ++ u32 offset; ++ u32 value; ++}; ++//======================================================================= ++ ++#define LOWER _TRUE ++#define RAISE _FALSE ++ ++/* Hardware Registers */ ++#if 0 ++#if 0 ++#define IOCMD_CTRL_REG 0x102502C0 ++#define IOCMD_DATA_REG 0x102502C4 ++#else ++#define IOCMD_CTRL_REG 0x10250370 ++#define IOCMD_DATA_REG 0x10250374 ++#endif ++ ++#define IOCMD_GET_THERMAL_METER 0xFD000028 ++ ++#define IOCMD_CLASS_BB_RF 0xF0 ++#define IOCMD_BB_READ_IDX 0x00 ++#define IOCMD_BB_WRITE_IDX 0x01 ++#define IOCMD_RF_READ_IDX 0x02 ++#define IOCMD_RF_WRIT_IDX 0x03 ++#endif ++#define BB_REG_BASE_ADDR 0x800 ++ ++/* MP variables */ ++#if 0 ++#define _2MAC_MODE_ 0 ++#define _LOOPBOOK_MODE_ 1 ++#endif ++typedef enum _MP_MODE_ { ++ MP_OFF, ++ MP_ON, ++ MP_ERR, ++ MP_CONTINUOUS_TX, ++ MP_SINGLE_CARRIER_TX, ++ MP_CARRIER_SUPPRISSION_TX, ++ MP_SINGLE_TONE_TX, ++ MP_PACKET_TX, ++ MP_PACKET_RX ++} MP_MODE; ++ ++#ifdef CONFIG_RTL8192C ++#define RF_PATH_A RF_PATH_A ++#define RF_PATH_B RF_PATH_B ++#define RF_PATH_C RF_PATH_C ++#define RF_PATH_D RF_PATH_D ++ ++#define MAX_RF_PATH_NUMS RF_PATH_MAX ++#else ++#define RF_PATH_A 0 ++#define RF_PATH_B 1 ++#define RF_PATH_C 2 ++#define RF_PATH_D 3 ++ ++#define MAX_RF_PATH_NUMS 2 ++#endif ++ ++extern u8 mpdatarate[NumRates]; ++ ++/* MP set force data rate base on the definition. */ ++typedef enum _MPT_RATE_INDEX ++{ ++ /* CCK rate. */ ++ MPT_RATE_1M, /* 0 */ ++ MPT_RATE_2M, ++ MPT_RATE_55M, ++ MPT_RATE_11M, /* 3 */ ++ ++ /* OFDM rate. */ ++ MPT_RATE_6M, /* 4 */ ++ MPT_RATE_9M, ++ MPT_RATE_12M, ++ MPT_RATE_18M, ++ MPT_RATE_24M, ++ MPT_RATE_36M, ++ MPT_RATE_48M, ++ MPT_RATE_54M, /* 11 */ ++ ++ /* HT rate. */ ++ MPT_RATE_MCS0, /* 12 */ ++ MPT_RATE_MCS1, ++ MPT_RATE_MCS2, ++ MPT_RATE_MCS3, ++ MPT_RATE_MCS4, ++ MPT_RATE_MCS5, ++ MPT_RATE_MCS6, ++ MPT_RATE_MCS7, /* 19 */ ++ MPT_RATE_MCS8, ++ MPT_RATE_MCS9, ++ MPT_RATE_MCS10, ++ MPT_RATE_MCS11, ++ MPT_RATE_MCS12, ++ MPT_RATE_MCS13, ++ MPT_RATE_MCS14, ++ MPT_RATE_MCS15, /* 27 */ ++ MPT_RATE_LAST ++}MPT_RATE_E, *PMPT_RATE_E; ++ ++#if 0 ++// Represent Channel Width in HT Capabilities ++typedef enum _HT_CHANNEL_WIDTH { ++ HT_CHANNEL_WIDTH_20 = 0, ++ HT_CHANNEL_WIDTH_40 = 1, ++}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; ++#endif ++ ++#define MAX_TX_PWR_INDEX_N_MODE 64 // 0x3F ++ ++typedef enum _POWER_MODE_ { ++ POWER_LOW = 0, ++ POWER_NORMAL ++}POWER_MODE; ++ ++ ++#define RX_PKT_BROADCAST 1 ++#define RX_PKT_DEST_ADDR 2 ++#define RX_PKT_PHY_MATCH 3 ++ ++#if 0 ++#define RPTMaxCount 0x000FFFFF; ++ ++// parameter 1 : BitMask ++// bit 0 : OFDM PPDU ++// bit 1 : OFDM False Alarm ++// bit 2 : OFDM MPDU OK ++// bit 3 : OFDM MPDU Fail ++// bit 4 : CCK PPDU ++// bit 5 : CCK False Alarm ++// bit 6 : CCK MPDU ok ++// bit 7 : CCK MPDU fail ++// bit 8 : HT PPDU counter ++// bit 9 : HT false alarm ++// bit 10 : HT MPDU total ++// bit 11 : HT MPDU OK ++// bit 12 : HT MPDU fail ++// bit 15 : RX full drop ++typedef enum _RXPHY_BITMASK_ ++{ ++ OFDM_PPDU_BIT = 0, ++ OFDM_FALSE_BIT, ++ OFDM_MPDU_OK_BIT, ++ OFDM_MPDU_FAIL_BIT, ++ CCK_PPDU_BIT, ++ CCK_FALSE_BIT, ++ CCK_MPDU_OK_BIT, ++ CCK_MPDU_FAIL_BIT, ++ HT_PPDU_BIT, ++ HT_FALSE_BIT, ++ HT_MPDU_BIT, ++ HT_MPDU_OK_BIT, ++ HT_MPDU_FAIL_BIT, ++} RXPHY_BITMASK; ++#endif ++ ++typedef enum _ENCRY_CTRL_STATE_ { ++ HW_CONTROL, //hw encryption& decryption ++ SW_CONTROL, //sw encryption& decryption ++ HW_ENCRY_SW_DECRY, //hw encryption & sw decryption ++ SW_ENCRY_HW_DECRY //sw encryption & hw decryption ++}ENCRY_CTRL_STATE; ++ ++typedef enum _OFDM_TX_MODE { ++ OFDM_ALL_OFF = 0, ++ OFDM_ContinuousTx = 1, ++ OFDM_SingleCarrier = 2, ++ OFDM_SingleTone = 4, ++} OFDM_TX_MODE; ++ ++//======================================================================= ++//extern struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv); ++//extern int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe); ++ ++extern s32 init_mp_priv(PADAPTER padapter); ++extern void free_mp_priv(struct mp_priv *pmp_priv); ++extern s32 MPT_InitializeAdapter(PADAPTER padapter, u8 Channel); ++extern void MPT_DeInitAdapter(PADAPTER padapter); ++extern s32 mp_start_test(PADAPTER padapter); ++extern void mp_stop_test(PADAPTER padapter); ++ ++//======================================================================= ++//extern void IQCalibrateBcut(PADAPTER pAdapter); ++ ++//extern u32 bb_reg_read(PADAPTER Adapter, u16 offset); ++//extern u8 bb_reg_write(PADAPTER Adapter, u16 offset, u32 value); ++//extern u32 rf_reg_read(PADAPTER Adapter, u8 path, u8 offset); ++//extern u8 rf_reg_write(PADAPTER Adapter, u8 path, u8 offset, u32 value); ++ ++//extern u32 get_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask); ++//extern u8 set_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask, u32 value); ++//extern u32 get_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask); ++//extern u8 set_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask, u32 value); ++ ++extern u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask); ++extern void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val); ++ ++extern u32 read_macreg(_adapter *padapter, u32 addr, u32 sz); ++extern void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz); ++extern u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask); ++extern void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val); ++extern u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr); ++extern void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val); ++ ++extern void SetChannel(PADAPTER pAdapter); ++extern void SetBandwidth(PADAPTER pAdapter); ++extern void SetTxPower(PADAPTER pAdapter); ++extern void SetAntennaPathPower(PADAPTER pAdapter); ++//extern void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset); ++extern void SetDataRate(PADAPTER pAdapter); ++ ++extern void SetAntenna(PADAPTER pAdapter); ++ ++//extern void SetCrystalCap(PADAPTER pAdapter); ++ ++extern s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther); ++extern void GetThermalMeter(PADAPTER pAdapter, u8 *value); ++ ++extern void SetContinuousTx(PADAPTER pAdapter, u8 bStart); ++extern void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart); ++extern void SetSingleToneTx(PADAPTER pAdapter, u8 bStart); ++extern void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); ++ ++extern void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc); ++extern void SetPacketTx(PADAPTER padapter); ++extern void SetPacketRx(PADAPTER pAdapter, u8 bStartRx); ++ ++extern void ResetPhyRxPktCount(PADAPTER pAdapter); ++extern u32 GetPhyRxPktReceived(PADAPTER pAdapter); ++extern u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter); ++ ++extern s32 SetPowerTracking(PADAPTER padapter, u8 enable); ++extern void GetPowerTracking(PADAPTER padapter, u8 *enable); ++ ++extern u32 mp_query_psd(PADAPTER pAdapter, u8 *data); ++ ++ ++extern void Hal_SetAntenna(PADAPTER pAdapter); ++extern void Hal_SetBandwidth(PADAPTER pAdapter); ++ ++extern void Hal_SetTxPower(PADAPTER pAdapter); ++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart ); ++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetBandwidth(PADAPTER pAdapter); ++ ++extern void Hal_SetDataRate(PADAPTER pAdapter); ++extern void Hal_SetChannel(PADAPTER pAdapter); ++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter); ++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther); ++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable); ++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable); ++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value); ++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter); ++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14); ++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven); ++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower); ++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter); ++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter); ++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart); ++extern void Hal_ProSetCrystalCap (PADAPTER pAdapter , u32 CrystalCapVal); ++ ++#endif //_RTW_MP_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_ioctl.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_ioctl.h +new file mode 100644 +index 000000000000..3016a9c68a22 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_ioctl.h +@@ -0,0 +1,595 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_MP_IOCTL_H_ ++#define _RTW_MP_IOCTL_H_ ++ ++//#include ++//#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if 0 ++#define TESTFWCMDNUMBER 1000000 ++#define TEST_H2CINT_WAIT_TIME 500 ++#define TEST_C2HINT_WAIT_TIME 500 ++#define HCI_TEST_SYSCFG_HWMASK 1 ++#define _BUSCLK_40M (4 << 2) ++#endif ++//------------------------------------------------------------------------------ ++typedef struct CFG_DBG_MSG_STRUCT { ++ u32 DebugLevel; ++ u32 DebugComponent_H32; ++ u32 DebugComponent_L32; ++}CFG_DBG_MSG_STRUCT,*PCFG_DBG_MSG_STRUCT; ++ ++typedef struct _RW_REG { ++ u32 offset; ++ u32 width; ++ u32 value; ++}mp_rw_reg,RW_Reg, *pRW_Reg; ++ ++//for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM ++typedef struct _EEPROM_RW_PARAM { ++ u32 offset; ++ u16 value; ++}eeprom_rw_param,EEPROM_RWParam, *pEEPROM_RWParam; ++ ++typedef struct _EFUSE_ACCESS_STRUCT_ { ++ u16 start_addr; ++ u16 cnts; ++ u8 data[0]; ++}EFUSE_ACCESS_STRUCT, *PEFUSE_ACCESS_STRUCT; ++ ++typedef struct _BURST_RW_REG { ++ u32 offset; ++ u32 len; ++ u8 Data[256]; ++}burst_rw_reg,Burst_RW_Reg, *pBurst_RW_Reg; ++ ++typedef struct _USB_VendorReq{ ++ u8 bRequest; ++ u16 wValue; ++ u16 wIndex; ++ u16 wLength; ++ u8 u8Dir;//0:OUT, 1:IN ++ u8 u8InData; ++}usb_vendor_req, USB_VendorReq, *pUSB_VendorReq; ++ ++typedef struct _DR_VARIABLE_STRUCT_ { ++ u8 offset; ++ u32 variable; ++}DR_VARIABLE_STRUCT; ++ ++//int mp_start_joinbss(_adapter *padapter, NDIS_802_11_SSID *pssid); ++ ++//void _irqlevel_changed_(_irqL *irqlevel, /*BOOLEAN*/unsigned char bLower); ++#ifdef PLATFORM_OS_XP ++static void _irqlevel_changed_(_irqL *irqlevel, u8 bLower) ++{ ++ ++ if (bLower == LOWER) { ++ *irqlevel = KeGetCurrentIrql(); ++ ++ if (*irqlevel > PASSIVE_LEVEL) { ++ KeLowerIrql(PASSIVE_LEVEL); ++ } ++ } else { ++ if (KeGetCurrentIrql() == PASSIVE_LEVEL) { ++ KeRaiseIrql(DISPATCH_LEVEL, irqlevel); ++ } ++ } ++ ++} ++#else ++#define _irqlevel_changed_(a,b) ++#endif ++ ++//oid_rtl_seg_81_80_00 ++NDIS_STATUS oid_rt_pro_set_data_rate_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_start_test_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_stop_test_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv* poid_par_priv); ++//oid_rtl_seg_81_80_20 ++NDIS_STATUS oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_modulation_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//oid_rtl_seg_81_87 ++NDIS_STATUS oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//oid_rtl_seg_81_85 ++NDIS_STATUS oid_rt_wireless_mode_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++// oid_rtl_seg_87_11_00 ++NDIS_STATUS oid_rt_pro8711_join_bss_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_read_register_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_write_register_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_burst_read_register_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_burst_write_register_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_write_txcmd_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_write16_eeprom_hdl (struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_rd_attrib_mem_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_wr_attrib_mem_hdl (struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_poll_rx_status_hdl(struct oid_par_priv* poid_par_priv); ++// oid_rtl_seg_87_11_20 ++NDIS_STATUS oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_read_tssi_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv* poid_par_priv); ++//oid_rtl_seg_87_11_50 ++NDIS_STATUS oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv* poid_par_priv); ++//oid_rtl_seg_87_11_F0 ++NDIS_STATUS oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv* poid_par_priv); ++ ++ ++//oid_rtl_seg_87_12_00 ++NDIS_STATUS oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_add_sta_info_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv); ++NDIS_STATUS oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv); ++NDIS_STATUS oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv); ++NDIS_STATUS oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv); ++NDIS_STATUS oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv); ++NDIS_STATUS oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv); ++ ++NDIS_STATUS oid_rt_set_bandwidth_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_crystal_cap_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_set_rx_packet_type_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_efuse_max_size_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_get_thermal_meter_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv); ++NDIS_STATUS oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_set_power_down_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_get_power_mode_hdl(struct oid_par_priv* poid_par_priv); ++ ++NDIS_STATUS oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv); ++ ++#ifdef _RTW_MP_IOCTL_C_ ++ ++const struct oid_obj_priv oid_rtl_seg_81_80_00[] = ++{ ++ {1, &oid_null_function}, //0x00 OID_RT_PRO_RESET_DUT ++ {1, &oid_rt_pro_set_data_rate_hdl}, //0x01 ++ {1, &oid_rt_pro_start_test_hdl}, //0x02 ++ {1, &oid_rt_pro_stop_test_hdl}, //0x03 ++ {1, &oid_null_function}, //0x04 OID_RT_PRO_SET_PREAMBLE ++ {1, &oid_null_function}, //0x05 OID_RT_PRO_SET_SCRAMBLER ++ {1, &oid_null_function}, //0x06 OID_RT_PRO_SET_FILTER_BB ++ {1, &oid_null_function}, //0x07 OID_RT_PRO_SET_MANUAL_DIVERSITY_BB ++ {1, &oid_rt_pro_set_channel_direct_call_hdl}, //0x08 ++ {1, &oid_null_function}, //0x09 OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL ++ {1, &oid_null_function}, //0x0A OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL ++ {1, &oid_rt_pro_set_continuous_tx_hdl}, //0x0B OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL ++ {1, &oid_rt_pro_set_single_carrier_tx_hdl}, //0x0C OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS ++ {1, &oid_null_function}, //0x0D OID_RT_PRO_SET_TX_ANTENNA_BB ++ {1, &oid_rt_pro_set_antenna_bb_hdl}, //0x0E ++ {1, &oid_null_function}, //0x0F OID_RT_PRO_SET_CR_SCRAMBLER ++ {1, &oid_null_function}, //0x10 OID_RT_PRO_SET_CR_NEW_FILTER ++ {1, &oid_rt_pro_set_tx_power_control_hdl}, //0x11 OID_RT_PRO_SET_TX_POWER_CONTROL ++ {1, &oid_null_function}, //0x12 OID_RT_PRO_SET_CR_TX_CONFIG ++ {1, &oid_null_function}, //0x13 OID_RT_PRO_GET_TX_POWER_CONTROL ++ {1, &oid_null_function}, //0x14 OID_RT_PRO_GET_CR_SIGNAL_QUALITY ++ {1, &oid_null_function}, //0x15 OID_RT_PRO_SET_CR_SETPOINT ++ {1, &oid_null_function}, //0x16 OID_RT_PRO_SET_INTEGRATOR ++ {1, &oid_null_function}, //0x17 OID_RT_PRO_SET_SIGNAL_QUALITY ++ {1, &oid_null_function}, //0x18 OID_RT_PRO_GET_INTEGRATOR ++ {1, &oid_null_function}, //0x19 OID_RT_PRO_GET_SIGNAL_QUALITY ++ {1, &oid_null_function}, //0x1A OID_RT_PRO_QUERY_EEPROM_TYPE ++ {1, &oid_null_function}, //0x1B OID_RT_PRO_WRITE_MAC_ADDRESS ++ {1, &oid_null_function}, //0x1C OID_RT_PRO_READ_MAC_ADDRESS ++ {1, &oid_null_function}, //0x1D OID_RT_PRO_WRITE_CIS_DATA ++ {1, &oid_null_function}, //0x1E OID_RT_PRO_READ_CIS_DATA ++ {1, &oid_null_function} //0x1F OID_RT_PRO_WRITE_POWER_CONTROL ++ ++}; ++ ++const struct oid_obj_priv oid_rtl_seg_81_80_20[] = ++{ ++ {1, &oid_null_function}, //0x20 OID_RT_PRO_READ_POWER_CONTROL ++ {1, &oid_null_function}, //0x21 OID_RT_PRO_WRITE_EEPROM ++ {1, &oid_null_function}, //0x22 OID_RT_PRO_READ_EEPROM ++ {1, &oid_rt_pro_reset_tx_packet_sent_hdl}, //0x23 ++ {1, &oid_rt_pro_query_tx_packet_sent_hdl}, //0x24 ++ {1, &oid_rt_pro_reset_rx_packet_received_hdl}, //0x25 ++ {1, &oid_rt_pro_query_rx_packet_received_hdl}, //0x26 ++ {1, &oid_rt_pro_query_rx_packet_crc32_error_hdl}, //0x27 ++ {1, &oid_null_function}, //0x28 OID_RT_PRO_QUERY_CURRENT_ADDRESS ++ {1, &oid_null_function}, //0x29 OID_RT_PRO_QUERY_PERMANENT_ADDRESS ++ {1, &oid_null_function}, //0x2A OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS ++ {1, &oid_rt_pro_set_carrier_suppression_tx_hdl},//0x2B OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX ++ {1, &oid_null_function}, //0x2C OID_RT_PRO_RECEIVE_PACKET ++ {1, &oid_null_function}, //0x2D OID_RT_PRO_WRITE_EEPROM_BYTE ++ {1, &oid_null_function}, //0x2E OID_RT_PRO_READ_EEPROM_BYTE ++ {1, &oid_rt_pro_set_modulation_hdl} //0x2F ++ ++}; ++ ++const struct oid_obj_priv oid_rtl_seg_81_80_40[] = ++{ ++ {1, &oid_null_function}, //0x40 ++ {1, &oid_null_function}, //0x41 ++ {1, &oid_null_function}, //0x42 ++ {1, &oid_rt_pro_set_single_tone_tx_hdl}, //0x43 ++ {1, &oid_null_function}, //0x44 ++ {1, &oid_null_function} //0x45 ++}; ++ ++const struct oid_obj_priv oid_rtl_seg_81_80_80[] = ++{ ++ {1, &oid_null_function}, //0x80 OID_RT_DRIVER_OPTION ++ {1, &oid_null_function}, //0x81 OID_RT_RF_OFF ++ {1, &oid_null_function} //0x82 OID_RT_AUTH_STATUS ++ ++}; ++ ++const struct oid_obj_priv oid_rtl_seg_81_85[] = ++{ ++ {1, &oid_rt_wireless_mode_hdl} //0x00 OID_RT_WIRELESS_MODE ++}; ++ ++struct oid_obj_priv oid_rtl_seg_81_87[] = ++{ ++ {1, &oid_null_function}, //0x80 OID_RT_PRO8187_WI_POLL ++ {1, &oid_rt_pro_write_bb_reg_hdl}, //0x81 ++ {1, &oid_rt_pro_read_bb_reg_hdl}, //0x82 ++ {1, &oid_rt_pro_write_rf_reg_hdl}, //0x82 ++ {1, &oid_rt_pro_read_rf_reg_hdl} //0x83 ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_11_00[] = ++{ ++ {1, &oid_rt_pro8711_join_bss_hdl}, //0x00 //S ++ {1, &oid_rt_pro_read_register_hdl}, //0x01 ++ {1, &oid_rt_pro_write_register_hdl}, //0x02 ++ {1, &oid_rt_pro_burst_read_register_hdl}, //0x03 ++ {1, &oid_rt_pro_burst_write_register_hdl}, //0x04 ++ {1, &oid_rt_pro_write_txcmd_hdl}, //0x05 ++ {1, &oid_rt_pro_read16_eeprom_hdl}, //0x06 ++ {1, &oid_rt_pro_write16_eeprom_hdl}, //0x07 ++ {1, &oid_null_function}, //0x08 OID_RT_PRO_H2C_SET_COMMAND ++ {1, &oid_null_function}, //0x09 OID_RT_PRO_H2C_QUERY_RESULT ++ {1, &oid_rt_pro8711_wi_poll_hdl}, //0x0A ++ {1, &oid_rt_pro8711_pkt_loss_hdl}, //0x0B ++ {1, &oid_rt_rd_attrib_mem_hdl}, //0x0C ++ {1, &oid_rt_wr_attrib_mem_hdl}, //0x0D ++ {1, &oid_null_function}, //0x0E ++ {1, &oid_null_function}, //0x0F ++ {1, &oid_null_function}, //0x10 OID_RT_PRO_H2C_CMD_MODE ++ {1, &oid_null_function}, //0x11 OID_RT_PRO_H2C_CMD_RSP_MODE ++ {1, &oid_null_function}, //0X12 OID_RT_PRO_WAIT_C2H_EVENT ++ {1, &oid_null_function}, //0X13 OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST ++ {1, &oid_null_function}, //0X14 OID_RT_PRO_SCSI_ACCESS_TEST ++ {1, &oid_null_function}, //0X15 OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT ++ {1, &oid_null_function}, //0X16 OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN ++ {1, &oid_null_function}, //0X17 OID_RT_RRO_RX_PKT_VIA_IOCTRL ++ {1, &oid_null_function}, //0X18 OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL ++ {1, &oid_null_function}, //0X19 OID_RT_RPO_SET_PWRMGT_TEST ++ {1, &oid_null_function}, //0X1A ++ {1, &oid_null_function}, //0X1B OID_RT_PRO_QRY_PWRMGT_TEST ++ {1, &oid_null_function}, //0X1C OID_RT_RPO_ASYNC_RWIO_TEST ++ {1, &oid_null_function}, //0X1D OID_RT_RPO_ASYNC_RWIO_POLL ++ {1, &oid_rt_pro_set_rf_intfs_hdl}, //0X1E ++ {1, &oid_rt_poll_rx_status_hdl} //0X1F ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_11_20[] = ++{ ++ {1, &oid_rt_pro_cfg_debug_message_hdl}, //0x20 ++ {1, &oid_rt_pro_set_data_rate_ex_hdl}, //0x21 ++ {1, &oid_rt_pro_set_basic_rate_hdl}, //0x22 ++ {1, &oid_rt_pro_read_tssi_hdl}, //0x23 ++ {1, &oid_rt_pro_set_power_tracking_hdl} //0x24 ++}; ++ ++ ++struct oid_obj_priv oid_rtl_seg_87_11_50[] = ++{ ++ {1, &oid_rt_pro_qry_pwrstate_hdl}, //0x50 ++ {1, &oid_rt_pro_set_pwrstate_hdl} //0x51 ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_11_80[] = ++{ ++ {1, &oid_null_function} //0x80 ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_11_B0[] = ++{ ++ {1, &oid_null_function} //0xB0 ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_11_F0[] = ++{ ++ {1, &oid_null_function}, //0xF0 ++ {1, &oid_null_function}, //0xF1 ++ {1, &oid_null_function}, //0xF2 ++ {1, &oid_null_function}, //0xF3 ++ {1, &oid_null_function}, //0xF4 ++ {1, &oid_null_function}, //0xF5 ++ {1, &oid_null_function}, //0xF6 ++ {1, &oid_null_function}, //0xF7 ++ {1, &oid_null_function}, //0xF8 ++ {1, &oid_null_function}, //0xF9 ++ {1, &oid_null_function}, //0xFA ++ {1, &oid_rt_pro_h2c_set_rate_table_hdl}, //0xFB ++ {1, &oid_rt_pro_h2c_get_rate_table_hdl}, //0xFC ++ {1, &oid_null_function}, //0xFD ++ {1, &oid_null_function}, //0xFE OID_RT_PRO_H2C_C2H_LBK_TEST ++ {1, &oid_null_function} //0xFF ++ ++}; ++ ++struct oid_obj_priv oid_rtl_seg_87_12_00[]= ++{ ++ {1, &oid_rt_pro_encryption_ctrl_hdl}, //0x00 Q&S ++ {1, &oid_rt_pro_add_sta_info_hdl}, //0x01 S ++ {1, &oid_rt_pro_dele_sta_info_hdl}, //0x02 S ++ {1, &oid_rt_pro_query_dr_variable_hdl}, //0x03 Q ++ {1, &oid_rt_pro_rx_packet_type_hdl}, //0x04 Q,S ++ {1, &oid_rt_pro_read_efuse_hdl}, //0x05 Q OID_RT_PRO_READ_EFUSE ++ {1, &oid_rt_pro_write_efuse_hdl}, //0x06 S OID_RT_PRO_WRITE_EFUSE ++ {1, &oid_rt_pro_rw_efuse_pgpkt_hdl}, //0x07 Q,S ++ {1, &oid_rt_get_efuse_current_size_hdl}, //0x08 Q ++ {1, &oid_rt_set_bandwidth_hdl}, //0x09 ++ {1, &oid_rt_set_crystal_cap_hdl}, //0x0a ++ {1, &oid_rt_set_rx_packet_type_hdl}, //0x0b S ++ {1, &oid_rt_get_efuse_max_size_hdl}, //0x0c ++ {1, &oid_rt_pro_set_tx_agc_offset_hdl}, //0x0d ++ {1, &oid_rt_pro_set_pkt_test_mode_hdl}, //0x0e ++ {1, &oid_null_function}, //0x0f OID_RT_PRO_FOR_EVM_TEST_SETTING ++ {1, &oid_rt_get_thermal_meter_hdl}, //0x10 Q OID_RT_PRO_GET_THERMAL_METER ++ {1, &oid_rt_reset_phy_rx_packet_count_hdl}, //0x11 S OID_RT_RESET_PHY_RX_PACKET_COUNT ++ {1, &oid_rt_get_phy_rx_packet_received_hdl}, //0x12 Q OID_RT_GET_PHY_RX_PACKET_RECEIVED ++ {1, &oid_rt_get_phy_rx_packet_crc32_error_hdl}, //0x13 Q OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR ++ {1, &oid_rt_set_power_down_hdl}, //0x14 Q OID_RT_SET_POWER_DOWN ++ {1, &oid_rt_get_power_mode_hdl} //0x15 Q OID_RT_GET_POWER_MODE ++}; ++ ++#else /* _RTL871X_MP_IOCTL_C_ */ ++ ++extern struct oid_obj_priv oid_rtl_seg_81_80_00[32]; ++extern struct oid_obj_priv oid_rtl_seg_81_80_20[16]; ++extern struct oid_obj_priv oid_rtl_seg_81_80_40[6]; ++extern struct oid_obj_priv oid_rtl_seg_81_80_80[3]; ++ ++extern struct oid_obj_priv oid_rtl_seg_81_85[1]; ++extern struct oid_obj_priv oid_rtl_seg_81_87[5]; ++ ++extern struct oid_obj_priv oid_rtl_seg_87_11_00[32]; ++extern struct oid_obj_priv oid_rtl_seg_87_11_20[5]; ++extern struct oid_obj_priv oid_rtl_seg_87_11_50[2]; ++extern struct oid_obj_priv oid_rtl_seg_87_11_80[1]; ++extern struct oid_obj_priv oid_rtl_seg_87_11_B0[1]; ++extern struct oid_obj_priv oid_rtl_seg_87_11_F0[16]; ++ ++extern struct oid_obj_priv oid_rtl_seg_87_12_00[32]; ++ ++#endif /* _RTL871X_MP_IOCTL_C_ */ ++ ++struct rwreg_param{ ++ u32 offset; ++ u32 width; ++ u32 value; ++}; ++ ++struct bbreg_param{ ++ u32 offset; ++ u32 phymask; ++ u32 value; ++}; ++/* ++struct rfchannel_param{ ++ u32 ch; ++ u32 modem; ++}; ++*/ ++struct txpower_param{ ++ u32 pwr_index; ++}; ++ ++ ++struct datarate_param{ ++ u32 rate_index; ++}; ++ ++ ++struct rfintfs_parm { ++ u32 rfintfs; ++}; ++ ++typedef struct _mp_xmit_parm_ { ++ u8 enable; ++ u32 count; ++ u16 length; ++ u8 payload_type; ++ u8 da[ETH_ALEN]; ++}MP_XMIT_PARM, *PMP_XMIT_PARM; ++ ++struct mp_xmit_packet { ++ u32 len; ++ u32 mem[MAX_MP_XMITBUF_SZ >> 2]; ++}; ++ ++struct psmode_param { ++ u32 ps_mode; ++ u32 smart_ps; ++}; ++ ++//for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM ++struct eeprom_rw_param { ++ u32 offset; ++ u16 value; ++}; ++ ++struct mp_ioctl_handler { ++ u32 paramsize; ++ u32 (*handler)(struct oid_par_priv* poid_par_priv); ++ u32 oid; ++}; ++ ++struct mp_ioctl_param{ ++ u32 subcode; ++ u32 len; ++ u8 data[0]; ++}; ++ ++#define GEN_MP_IOCTL_SUBCODE(code) _MP_IOCTL_ ## code ## _CMD_ ++ ++enum RTL871X_MP_IOCTL_SUBCODE { ++ GEN_MP_IOCTL_SUBCODE(MP_START), /*0*/ ++ GEN_MP_IOCTL_SUBCODE(MP_STOP), ++ GEN_MP_IOCTL_SUBCODE(READ_REG), ++ GEN_MP_IOCTL_SUBCODE(WRITE_REG), ++ GEN_MP_IOCTL_SUBCODE(READ_BB_REG), ++ GEN_MP_IOCTL_SUBCODE(WRITE_BB_REG), /*5*/ ++ GEN_MP_IOCTL_SUBCODE(READ_RF_REG), ++ GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG), ++ GEN_MP_IOCTL_SUBCODE(SET_CHANNEL), ++ GEN_MP_IOCTL_SUBCODE(SET_TXPOWER), ++ GEN_MP_IOCTL_SUBCODE(SET_DATARATE), /*10*/ ++ GEN_MP_IOCTL_SUBCODE(SET_BANDWIDTH), ++ GEN_MP_IOCTL_SUBCODE(SET_ANTENNA), ++ GEN_MP_IOCTL_SUBCODE(CNTU_TX), ++ GEN_MP_IOCTL_SUBCODE(SC_TX), ++ GEN_MP_IOCTL_SUBCODE(CS_TX), /*15*/ ++ GEN_MP_IOCTL_SUBCODE(ST_TX), ++ GEN_MP_IOCTL_SUBCODE(IOCTL_XMIT_PACKET), ++ GEN_MP_IOCTL_SUBCODE(SET_RX_PKT_TYPE), ++ GEN_MP_IOCTL_SUBCODE(RESET_PHY_RX_PKT_CNT), ++ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_RECV), /*20*/ ++ GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_ERROR), ++ GEN_MP_IOCTL_SUBCODE(READ16_EEPROM), ++ GEN_MP_IOCTL_SUBCODE(WRITE16_EEPROM), ++ GEN_MP_IOCTL_SUBCODE(EFUSE), ++ GEN_MP_IOCTL_SUBCODE(EFUSE_MAP), /*25*/ ++ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_MAX_SIZE), ++ GEN_MP_IOCTL_SUBCODE(GET_EFUSE_CURRENT_SIZE), ++ GEN_MP_IOCTL_SUBCODE(GET_THERMAL_METER), ++ GEN_MP_IOCTL_SUBCODE(SET_PTM), ++ GEN_MP_IOCTL_SUBCODE(SET_POWER_DOWN), /*30*/ ++ GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO), ++ GEN_MP_IOCTL_SUBCODE(SET_DM_BT), /*35*/ ++ GEN_MP_IOCTL_SUBCODE(DEL_BA), /*36*/ ++ GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS), /*37*/ ++ MAX_MP_IOCTL_SUBCODE, ++}; ++ ++u32 mp_ioctl_xmit_packet_hdl(struct oid_par_priv* poid_par_priv); ++ ++#ifdef _RTW_MP_IOCTL_C_ ++ ++#define GEN_MP_IOCTL_HANDLER(sz, hdl, oid) {sz, hdl, oid}, ++ ++#define EXT_MP_IOCTL_HANDLER(sz, subcode, oid) {sz, mp_ioctl_ ## subcode ## _hdl, oid}, ++ ++ ++struct mp_ioctl_handler mp_ioctl_hdl[] = { ++ ++/*0*/ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_start_test_hdl, OID_RT_PRO_START_TEST) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_stop_test_hdl, OID_RT_PRO_STOP_TEST) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(struct rwreg_param), oid_rt_pro_read_register_hdl, OID_RT_PRO_READ_REGISTER) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct rwreg_param), oid_rt_pro_write_register_hdl, OID_RT_PRO_WRITE_REGISTER) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct bb_reg_param), oid_rt_pro_read_bb_reg_hdl, OID_RT_PRO_READ_BB_REG) ++/*5*/ GEN_MP_IOCTL_HANDLER(sizeof(struct bb_reg_param), oid_rt_pro_write_bb_reg_hdl, OID_RT_PRO_WRITE_BB_REG) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct rf_reg_param), oid_rt_pro_read_rf_reg_hdl, OID_RT_PRO_RF_READ_REGISTRY) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct rf_reg_param), oid_rt_pro_write_rf_reg_hdl, OID_RT_PRO_RF_WRITE_REGISTRY) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_channel_direct_call_hdl, OID_RT_PRO_SET_CHANNEL_DIRECT_CALL) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct txpower_param), oid_rt_pro_set_tx_power_control_hdl, OID_RT_PRO_SET_TX_POWER_CONTROL) ++/*10*/ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_data_rate_hdl, OID_RT_PRO_SET_DATA_RATE) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_set_bandwidth_hdl, OID_RT_SET_BANDWIDTH) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_antenna_bb_hdl, OID_RT_PRO_SET_ANTENNA_BB) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_continuous_tx_hdl, OID_RT_PRO_SET_CONTINUOUS_TX) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_single_carrier_tx_hdl, OID_RT_PRO_SET_SINGLE_CARRIER_TX) ++/*15*/ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_carrier_suppression_tx_hdl, OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_single_tone_tx_hdl, OID_RT_PRO_SET_SINGLE_TONE_TX) ++ ++ EXT_MP_IOCTL_HANDLER(0, xmit_packet, 0) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_set_rx_packet_type_hdl, OID_RT_SET_RX_PACKET_TYPE) ++ GEN_MP_IOCTL_HANDLER(0, oid_rt_reset_phy_rx_packet_count_hdl, OID_RT_RESET_PHY_RX_PACKET_COUNT) ++/*20*/ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_phy_rx_packet_received_hdl, OID_RT_GET_PHY_RX_PACKET_RECEIVED) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_phy_rx_packet_crc32_error_hdl, OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(struct eeprom_rw_param), NULL, 0) ++ GEN_MP_IOCTL_HANDLER(sizeof(struct eeprom_rw_param), NULL, 0) ++ GEN_MP_IOCTL_HANDLER(sizeof(EFUSE_ACCESS_STRUCT), oid_rt_pro_efuse_hdl, OID_RT_PRO_EFUSE) ++/*25*/ GEN_MP_IOCTL_HANDLER(0, oid_rt_pro_efuse_map_hdl, OID_RT_PRO_EFUSE_MAP) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_efuse_max_size_hdl, OID_RT_GET_EFUSE_MAX_SIZE) ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_efuse_current_size_hdl, OID_RT_GET_EFUSE_CURRENT_SIZE) ++ ++ GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_thermal_meter_hdl, OID_RT_PRO_GET_THERMAL_METER) ++ GEN_MP_IOCTL_HANDLER(sizeof(u8), oid_rt_pro_set_power_tracking_hdl, OID_RT_PRO_SET_POWER_TRACKING) ++/*30*/ GEN_MP_IOCTL_HANDLER(sizeof(u8), oid_rt_set_power_down_hdl, OID_RT_SET_POWER_DOWN) ++/*31*/ GEN_MP_IOCTL_HANDLER(0, oid_rt_pro_trigger_gpio_hdl, 0) ++ ++ ++}; ++ ++#else /* _RTW_MP_IOCTL_C_ */ ++ ++extern struct mp_ioctl_handler mp_ioctl_hdl[]; ++ ++#endif /* _RTW_MP_IOCTL_C_ */ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_phy_regdef.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_phy_regdef.h +new file mode 100644 +index 000000000000..24e662413d38 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_mp_phy_regdef.h +@@ -0,0 +1,1096 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++/***************************************************************************** ++ * ++ * Module: __RTW_MP_PHY_REGDEF_H_ ++ * ++ * ++ * Note: 1. Define PMAC/BB register map ++ * 2. Define RF register map ++ * 3. PMAC/BB register bit mask. ++ * 4. RF reg bit mask. ++ * 5. Other BB/RF relative definition. ++ * ++ * ++ * Export: Constants, macro, functions(API), global variables(None). ++ * ++ * Abbrev: ++ * ++ * History: ++ * Data Who Remark ++ * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h. ++ * 2. Reorganize code architecture. ++ * 09/25/2008 MH 1. Add RL6052 register definition ++ * ++ *****************************************************************************/ ++#ifndef __RTW_MP_PHY_REGDEF_H_ ++#define __RTW_MP_PHY_REGDEF_H_ ++ ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++//============================================================ ++// 8192S Regsiter offset definition ++//============================================================ ++ ++// ++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 ++// 3. RF register 0x00-2E ++// 4. Bit Mask for BB/RF register ++// 5. Other defintion for BB/RF R/W ++// ++ ++ ++// ++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF ++// 1. Page1(0x100) ++// ++#define rPMAC_Reset 0x100 ++#define rPMAC_TxStart 0x104 ++#define rPMAC_TxLegacySIG 0x108 ++#define rPMAC_TxHTSIG1 0x10c ++#define rPMAC_TxHTSIG2 0x110 ++#define rPMAC_PHYDebug 0x114 ++#define rPMAC_TxPacketNum 0x118 ++#define rPMAC_TxIdle 0x11c ++#define rPMAC_TxMACHeader0 0x120 ++#define rPMAC_TxMACHeader1 0x124 ++#define rPMAC_TxMACHeader2 0x128 ++#define rPMAC_TxMACHeader3 0x12c ++#define rPMAC_TxMACHeader4 0x130 ++#define rPMAC_TxMACHeader5 0x134 ++#define rPMAC_TxDataType 0x138 ++#define rPMAC_TxRandomSeed 0x13c ++#define rPMAC_CCKPLCPPreamble 0x140 ++#define rPMAC_CCKPLCPHeader 0x144 ++#define rPMAC_CCKCRC16 0x148 ++#define rPMAC_OFDMRxCRC32OK 0x170 ++#define rPMAC_OFDMRxCRC32Er 0x174 ++#define rPMAC_OFDMRxParityEr 0x178 ++#define rPMAC_OFDMRxCRC8Er 0x17c ++#define rPMAC_CCKCRxRC16Er 0x180 ++#define rPMAC_CCKCRxRC32Er 0x184 ++#define rPMAC_CCKCRxRC32OK 0x188 ++#define rPMAC_TxStatus 0x18c ++ ++// ++// 2. Page2(0x200) ++// ++// The following two definition are only used for USB interface. ++//#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address. ++//#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data. ++ ++// ++// 3. Page8(0x800) ++// ++#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting?? ++ ++#define rFPGA0_TxInfo 0x804 // Status report?? ++#define rFPGA0_PSDFunction 0x808 ++ ++#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain? ++ ++#define rFPGA0_RFTiming1 0x810 // Useless now ++#define rFPGA0_RFTiming2 0x814 ++//#define rFPGA0_XC_RFTiming 0x818 ++//#define rFPGA0_XD_RFTiming 0x81c ++ ++#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register ++#define rFPGA0_XA_HSSIParameter2 0x824 ++#define rFPGA0_XB_HSSIParameter1 0x828 ++#define rFPGA0_XB_HSSIParameter2 0x82c ++#define rFPGA0_XC_HSSIParameter1 0x830 ++#define rFPGA0_XC_HSSIParameter2 0x834 ++#define rFPGA0_XD_HSSIParameter1 0x838 ++#define rFPGA0_XD_HSSIParameter2 0x83c ++#define rFPGA0_XA_LSSIParameter 0x840 ++#define rFPGA0_XB_LSSIParameter 0x844 ++#define rFPGA0_XC_LSSIParameter 0x848 ++#define rFPGA0_XD_LSSIParameter 0x84c ++ ++#define rFPGA0_RFWakeUpParameter 0x850 // Useless now ++#define rFPGA0_RFSleepUpParameter 0x854 ++ ++#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch ++#define rFPGA0_XCD_SwitchControl 0x85c ++ ++#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch ++#define rFPGA0_XB_RFInterfaceOE 0x864 ++#define rFPGA0_XC_RFInterfaceOE 0x868 ++#define rFPGA0_XD_RFInterfaceOE 0x86c ++ ++#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control ++#define rFPGA0_XCD_RFInterfaceSW 0x874 ++ ++#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter ++#define rFPGA0_XCD_RFParameter 0x87c ++ ++#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4?? ++#define rFPGA0_AnalogParameter2 0x884 ++#define rFPGA0_AnalogParameter3 0x888 // Useless now ++#define rFPGA0_AnalogParameter4 0x88c ++ ++#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback ++#define rFPGA0_XB_LSSIReadBack 0x8a4 ++#define rFPGA0_XC_LSSIReadBack 0x8a8 ++#define rFPGA0_XD_LSSIReadBack 0x8ac ++ ++#define rFPGA0_PSDReport 0x8b4 // Useless now ++#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value ++#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now ++ ++// ++// 4. Page9(0x900) ++// ++#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting?? ++ ++#define rFPGA1_TxBlock 0x904 // Useless now ++#define rFPGA1_DebugSelect 0x908 // Useless now ++#define rFPGA1_TxInfo 0x90c // Useless now // Status report?? ++ ++// ++// 5. PageA(0xA00) ++// ++// Set Control channel to upper or lower. These settings are required only for 40MHz ++#define rCCK0_System 0xa00 ++ ++#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI ++#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain ++ ++#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series ++#define rCCK0_RxAGC2 0xa10 //AGC & DAGC ++ ++#define rCCK0_RxHP 0xa14 ++ ++#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold ++#define rCCK0_DSPParameter2 0xa1c //SQ threshold ++ ++#define rCCK0_TxFilter1 0xa20 ++#define rCCK0_TxFilter2 0xa24 ++#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 ++#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report ++#define rCCK0_TRSSIReport 0xa50 ++#define rCCK0_RxReport 0xa54 //0xa57 ++#define rCCK0_FACounterLower 0xa5c //0xa5b ++#define rCCK0_FACounterUpper 0xa58 //0xa5c ++ ++// ++// 6. PageC(0xC00) ++// ++#define rOFDM0_LSTF 0xc00 ++ ++#define rOFDM0_TRxPathEnable 0xc04 ++#define rOFDM0_TRMuxPar 0xc08 ++#define rOFDM0_TRSWIsolation 0xc0c ++ ++#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter ++#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix ++#define rOFDM0_XBRxAFE 0xc18 ++#define rOFDM0_XBRxIQImbalance 0xc1c ++#define rOFDM0_XCRxAFE 0xc20 ++#define rOFDM0_XCRxIQImbalance 0xc24 ++#define rOFDM0_XDRxAFE 0xc28 ++#define rOFDM0_XDRxIQImbalance 0xc2c ++ ++#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain ++#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. ++#define rOFDM0_RxDetector3 0xc38 //Frame Sync. ++#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI ++ ++#define rOFDM0_RxDSP 0xc40 //Rx Sync Path ++#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC ++#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold ++#define rOFDM0_ECCAThreshold 0xc4c // energy CCA ++ ++#define rOFDM0_XAAGCCore1 0xc50 // DIG ++#define rOFDM0_XAAGCCore2 0xc54 ++#define rOFDM0_XBAGCCore1 0xc58 ++#define rOFDM0_XBAGCCore2 0xc5c ++#define rOFDM0_XCAGCCore1 0xc60 ++#define rOFDM0_XCAGCCore2 0xc64 ++#define rOFDM0_XDAGCCore1 0xc68 ++#define rOFDM0_XDAGCCore2 0xc6c ++ ++#define rOFDM0_AGCParameter1 0xc70 ++#define rOFDM0_AGCParameter2 0xc74 ++#define rOFDM0_AGCRSSITable 0xc78 ++#define rOFDM0_HTSTFAGC 0xc7c ++ ++#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG ++#define rOFDM0_XATxAFE 0xc84 ++#define rOFDM0_XBTxIQImbalance 0xc88 ++#define rOFDM0_XBTxAFE 0xc8c ++#define rOFDM0_XCTxIQImbalance 0xc90 ++#define rOFDM0_XCTxAFE 0xc94 ++#define rOFDM0_XDTxIQImbalance 0xc98 ++#define rOFDM0_XDTxAFE 0xc9c ++#define rOFDM0_RxIQExtAnta 0xca0 ++ ++#define rOFDM0_RxHPParameter 0xce0 ++#define rOFDM0_TxPseudoNoiseWgt 0xce4 ++#define rOFDM0_FrameSync 0xcf0 ++#define rOFDM0_DFSReport 0xcf4 ++#define rOFDM0_TxCoeff1 0xca4 ++#define rOFDM0_TxCoeff2 0xca8 ++#define rOFDM0_TxCoeff3 0xcac ++#define rOFDM0_TxCoeff4 0xcb0 ++#define rOFDM0_TxCoeff5 0xcb4 ++#define rOFDM0_TxCoeff6 0xcb8 ++ ++ ++// ++// 7. PageD(0xD00) ++// ++#define rOFDM1_LSTF 0xd00 ++#define rOFDM1_TRxPathEnable 0xd04 ++ ++#define rOFDM1_CFO 0xd08 // No setting now ++#define rOFDM1_CSI1 0xd10 ++#define rOFDM1_SBD 0xd14 ++#define rOFDM1_CSI2 0xd18 ++#define rOFDM1_CFOTracking 0xd2c ++#define rOFDM1_TRxMesaure1 0xd34 ++#define rOFDM1_IntfDet 0xd3c ++#define rOFDM1_PseudoNoiseStateAB 0xd50 ++#define rOFDM1_PseudoNoiseStateCD 0xd54 ++#define rOFDM1_RxPseudoNoiseWgt 0xd58 ++ ++#define rOFDM_PHYCounter1 0xda0 //cca, parity fail ++#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail ++#define rOFDM_PHYCounter3 0xda8 //MCS not support ++ ++#define rOFDM_ShortCFOAB 0xdac // No setting now ++#define rOFDM_ShortCFOCD 0xdb0 ++#define rOFDM_LongCFOAB 0xdb4 ++#define rOFDM_LongCFOCD 0xdb8 ++#define rOFDM_TailCFOAB 0xdbc ++#define rOFDM_TailCFOCD 0xdc0 ++#define rOFDM_PWMeasure1 0xdc4 ++#define rOFDM_PWMeasure2 0xdc8 ++#define rOFDM_BWReport 0xdcc ++#define rOFDM_AGCReport 0xdd0 ++#define rOFDM_RxSNR 0xdd4 ++#define rOFDM_RxEVMCSI 0xdd8 ++#define rOFDM_SIGReport 0xddc ++ ++ ++// ++// 8. PageE(0xE00) ++// ++#define rTxAGC_Rate18_06 0xe00 ++#define rTxAGC_Rate54_24 0xe04 ++#define rTxAGC_CCK_Mcs32 0xe08 ++#define rTxAGC_Mcs03_Mcs00 0xe10 ++#define rTxAGC_Mcs07_Mcs04 0xe14 ++#define rTxAGC_Mcs11_Mcs08 0xe18 ++#define rTxAGC_Mcs15_Mcs12 0xe1c ++ ++// Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register] ++#define rRx_Wait_CCCA 0xe70 ++#define rAnapar_Ctrl_BB 0xee0 ++ ++// ++// 7. RF Register 0x00-0x2E (RF 8256) ++// RF-0222D 0x00-3F ++// ++//Zebra1 ++#define RTL92SE_FPGA_VERIFY 0 ++#define rZebra1_HSSIEnable 0x0 // Useless now ++#define rZebra1_TRxEnable1 0x1 ++#define rZebra1_TRxEnable2 0x2 ++#define rZebra1_AGC 0x4 ++#define rZebra1_ChargePump 0x5 ++//#if (RTL92SE_FPGA_VERIFY == 1) ++#define rZebra1_Channel 0x7 // RF channel switch ++//#else ++ ++//#endif ++#define rZebra1_TxGain 0x8 // Useless now ++#define rZebra1_TxLPF 0x9 ++#define rZebra1_RxLPF 0xb ++#define rZebra1_RxHPFCorner 0xc ++ ++//Zebra4 ++#define rGlobalCtrl 0 // Useless now ++#define rRTL8256_TxLPF 19 ++#define rRTL8256_RxLPF 11 ++ ++//RTL8258 ++#define rRTL8258_TxLPF 0x11 // Useless now ++#define rRTL8258_RxLPF 0x13 ++#define rRTL8258_RSSILPF 0xa ++ ++// ++// RL6052 Register definition ++// ++#define RF_AC 0x00 // ++ ++#define RF_IQADJ_G1 0x01 // ++#define RF_IQADJ_G2 0x02 // ++#define RF_POW_TRSW 0x05 // ++ ++#define RF_GAIN_RX 0x06 // ++#define RF_GAIN_TX 0x07 // ++ ++#define RF_TXM_IDAC 0x08 // ++#define RF_BS_IQGEN 0x0F // ++ ++#define RF_MODE1 0x10 // ++#define RF_MODE2 0x11 // ++ ++#define RF_RX_AGC_HP 0x12 // ++#define RF_TX_AGC 0x13 // ++#define RF_BIAS 0x14 // ++#define RF_IPA 0x15 // ++#define RF_POW_ABILITY 0x17 // ++#define RF_MODE_AG 0x18 // ++#define rRfChannel 0x18 // RF channel and BW switch ++#define RF_CHNLBW 0x18 // RF channel and BW switch ++#define RF_TOP 0x19 // ++ ++#define RF_RX_G1 0x1A // ++#define RF_RX_G2 0x1B // ++ ++#define RF_RX_BB2 0x1C // ++#define RF_RX_BB1 0x1D // ++ ++#define RF_RCK1 0x1E // ++#define RF_RCK2 0x1F // ++ ++#define RF_TX_G1 0x20 // ++#define RF_TX_G2 0x21 // ++#define RF_TX_G3 0x22 // ++ ++#define RF_TX_BB1 0x23 // ++ ++#define RF_T_METER 0x24 // ++ ++#define RF_SYN_G1 0x25 // RF TX Power control ++#define RF_SYN_G2 0x26 // RF TX Power control ++#define RF_SYN_G3 0x27 // RF TX Power control ++#define RF_SYN_G4 0x28 // RF TX Power control ++#define RF_SYN_G5 0x29 // RF TX Power control ++#define RF_SYN_G6 0x2A // RF TX Power control ++#define RF_SYN_G7 0x2B // RF TX Power control ++#define RF_SYN_G8 0x2C // RF TX Power control ++ ++#define RF_RCK_OS 0x30 // RF TX PA control ++ ++#define RF_TXPA_G1 0x31 // RF TX PA control ++#define RF_TXPA_G2 0x32 // RF TX PA control ++#define RF_TXPA_G3 0x33 // RF TX PA control ++ ++// ++//Bit Mask ++// ++// 1. Page1(0x100) ++#define bBBResetB 0x100 // Useless now? ++#define bGlobalResetB 0x200 ++#define bOFDMTxStart 0x4 ++#define bCCKTxStart 0x8 ++#define bCRC32Debug 0x100 ++#define bPMACLoopback 0x10 ++#define bTxLSIG 0xffffff ++#define bOFDMTxRate 0xf ++#define bOFDMTxReserved 0x10 ++#define bOFDMTxLength 0x1ffe0 ++#define bOFDMTxParity 0x20000 ++#define bTxHTSIG1 0xffffff ++#define bTxHTMCSRate 0x7f ++#define bTxHTBW 0x80 ++#define bTxHTLength 0xffff00 ++#define bTxHTSIG2 0xffffff ++#define bTxHTSmoothing 0x1 ++#define bTxHTSounding 0x2 ++#define bTxHTReserved 0x4 ++#define bTxHTAggreation 0x8 ++#define bTxHTSTBC 0x30 ++#define bTxHTAdvanceCoding 0x40 ++#define bTxHTShortGI 0x80 ++#define bTxHTNumberHT_LTF 0x300 ++#define bTxHTCRC8 0x3fc00 ++#define bCounterReset 0x10000 ++#define bNumOfOFDMTx 0xffff ++#define bNumOfCCKTx 0xffff0000 ++#define bTxIdleInterval 0xffff ++#define bOFDMService 0xffff0000 ++#define bTxMACHeader 0xffffffff ++#define bTxDataInit 0xff ++#define bTxHTMode 0x100 ++#define bTxDataType 0x30000 ++#define bTxRandomSeed 0xffffffff ++#define bCCKTxPreamble 0x1 ++#define bCCKTxSFD 0xffff0000 ++#define bCCKTxSIG 0xff ++#define bCCKTxService 0xff00 ++#define bCCKLengthExt 0x8000 ++#define bCCKTxLength 0xffff0000 ++#define bCCKTxCRC16 0xffff ++#define bCCKTxStatus 0x1 ++#define bOFDMTxStatus 0x2 ++ ++#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff)) ++ ++// 2. Page8(0x800) ++#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD ++#define bJapanMode 0x2 ++#define bCCKTxSC 0x30 ++#define bCCKEn 0x1000000 ++#define bOFDMEn 0x2000000 ++ ++#define bOFDMRxADCPhase 0x10000 // Useless now ++#define bOFDMTxDACPhase 0x40000 ++#define bXATxAGC 0x3f ++ ++#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage ++#define bXCTxAGC 0xf000 ++#define bXDTxAGC 0xf0000 ++ ++#define bPAStart 0xf0000000 // Useless now ++#define bTRStart 0x00f00000 ++#define bRFStart 0x0000f000 ++#define bBBStart 0x000000f0 ++#define bBBCCKStart 0x0000000f ++#define bPAEnd 0xf //Reg0x814 ++#define bTREnd 0x0f000000 ++#define bRFEnd 0x000f0000 ++#define bCCAMask 0x000000f0 //T2R ++#define bR2RCCAMask 0x00000f00 ++#define bHSSI_R2TDelay 0xf8000000 ++#define bHSSI_T2RDelay 0xf80000 ++#define bContTxHSSI 0x400 //chane gain at continue Tx ++#define bIGFromCCK 0x200 ++#define bAGCAddress 0x3f ++#define bRxHPTx 0x7000 ++#define bRxHPT2R 0x38000 ++#define bRxHPCCKIni 0xc0000 ++#define bAGCTxCode 0xc00000 ++#define bAGCRxCode 0x300000 ++ ++#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1 ++#define b3WireAddressLength 0x400 ++ ++#define b3WireRFPowerDown 0x1 // Useless now ++//#define bHWSISelect 0x8 ++#define b5GPAPEPolarity 0x40000000 ++#define b2GPAPEPolarity 0x80000000 ++#define bRFSW_TxDefaultAnt 0x3 ++#define bRFSW_TxOptionAnt 0x30 ++#define bRFSW_RxDefaultAnt 0x300 ++#define bRFSW_RxOptionAnt 0x3000 ++#define bRFSI_3WireData 0x1 ++#define bRFSI_3WireClock 0x2 ++#define bRFSI_3WireLoad 0x4 ++#define bRFSI_3WireRW 0x8 ++#define bRFSI_3Wire 0xf ++ ++#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW ++ ++#define bRFSI_TRSW 0x20 // Useless now ++#define bRFSI_TRSWB 0x40 ++#define bRFSI_ANTSW 0x100 ++#define bRFSI_ANTSWB 0x200 ++#define bRFSI_PAPE 0x400 ++#define bRFSI_PAPE5G 0x800 ++#define bBandSelect 0x1 ++#define bHTSIG2_GI 0x80 ++#define bHTSIG2_Smoothing 0x01 ++#define bHTSIG2_Sounding 0x02 ++#define bHTSIG2_Aggreaton 0x08 ++#define bHTSIG2_STBC 0x30 ++#define bHTSIG2_AdvCoding 0x40 ++#define bHTSIG2_NumOfHTLTF 0x300 ++#define bHTSIG2_CRC8 0x3fc ++#define bHTSIG1_MCS 0x7f ++#define bHTSIG1_BandWidth 0x80 ++#define bHTSIG1_HTLength 0xffff ++#define bLSIG_Rate 0xf ++#define bLSIG_Reserved 0x10 ++#define bLSIG_Length 0x1fffe ++#define bLSIG_Parity 0x20 ++#define bCCKRxPhase 0x4 ++#if (RTL92SE_FPGA_VERIFY == 1) ++#define bLSSIReadAddress 0x3f000000 //LSSI "Read" Address // Reg 0x824 rFPGA0_XA_HSSIParameter2 ++#else ++#define bLSSIReadAddress 0x7f800000 // T65 RF ++#endif ++#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal ++#if (RTL92SE_FPGA_VERIFY == 1) ++#define bLSSIReadBackData 0xfff // Reg 0x8a0 rFPGA0_XA_LSSIReadBack ++#else ++#define bLSSIReadBackData 0xfffff // T65 RF ++#endif ++#define bLSSIReadOKFlag 0x1000 // Useless now ++#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz ++#define bRegulator0Standby 0x1 ++#define bRegulatorPLLStandby 0x2 ++#define bRegulator1Standby 0x4 ++#define bPLLPowerUp 0x8 ++#define bDPLLPowerUp 0x10 ++#define bDA10PowerUp 0x20 ++#define bAD7PowerUp 0x200 ++#define bDA6PowerUp 0x2000 ++#define bXtalPowerUp 0x4000 ++#define b40MDClkPowerUP 0x8000 ++#define bDA6DebugMode 0x20000 ++#define bDA6Swing 0x380000 ++ ++#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ ++ ++#define b80MClkDelay 0x18000000 // Useless ++#define bAFEWatchDogEnable 0x20000000 ++ ++#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap ++#define bXtalCap23 0x3 ++#define bXtalCap92x 0x0f000000 ++#define bXtalCap 0x0f000000 ++ ++#define bIntDifClkEnable 0x400 // Useless ++#define bExtSigClkEnable 0x800 ++#define bBandgapMbiasPowerUp 0x10000 ++#define bAD11SHGain 0xc0000 ++#define bAD11InputRange 0x700000 ++#define bAD11OPCurrent 0x3800000 ++#define bIPathLoopback 0x4000000 ++#define bQPathLoopback 0x8000000 ++#define bAFELoopback 0x10000000 ++#define bDA10Swing 0x7e0 ++#define bDA10Reverse 0x800 ++#define bDAClkSource 0x1000 ++#define bAD7InputRange 0x6000 ++#define bAD7Gain 0x38000 ++#define bAD7OutputCMMode 0x40000 ++#define bAD7InputCMMode 0x380000 ++#define bAD7Current 0xc00000 ++#define bRegulatorAdjust 0x7000000 ++#define bAD11PowerUpAtTx 0x1 ++#define bDA10PSAtTx 0x10 ++#define bAD11PowerUpAtRx 0x100 ++#define bDA10PSAtRx 0x1000 ++#define bCCKRxAGCFormat 0x200 ++#define bPSDFFTSamplepPoint 0xc000 ++#define bPSDAverageNum 0x3000 ++#define bIQPathControl 0xc00 ++#define bPSDFreq 0x3ff ++#define bPSDAntennaPath 0x30 ++#define bPSDIQSwitch 0x40 ++#define bPSDRxTrigger 0x400000 ++#define bPSDTxTrigger 0x80000000 ++#define bPSDSineToneScale 0x7f000000 ++#define bPSDReport 0xffff ++ ++// 3. Page9(0x900) ++#define bOFDMTxSC 0x30000000 // Useless ++#define bCCKTxOn 0x1 ++#define bOFDMTxOn 0x2 ++#define bDebugPage 0xfff //reset debug page and also HWord, LWord ++#define bDebugItem 0xff //reset debug page and LWord ++#define bAntL 0x10 ++#define bAntNonHT 0x100 ++#define bAntHT1 0x1000 ++#define bAntHT2 0x10000 ++#define bAntHT1S1 0x100000 ++#define bAntNonHTS1 0x1000000 ++ ++// 4. PageA(0xA00) ++#define bCCKBBMode 0x3 // Useless ++#define bCCKTxPowerSaving 0x80 ++#define bCCKRxPowerSaving 0x40 ++ ++#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch ++ ++#define bCCKScramble 0x8 // Useless ++#define bCCKAntDiversity 0x8000 ++#define bCCKCarrierRecovery 0x4000 ++#define bCCKTxRate 0x3000 ++#define bCCKDCCancel 0x0800 ++#define bCCKISICancel 0x0400 ++#define bCCKMatchFilter 0x0200 ++#define bCCKEqualizer 0x0100 ++#define bCCKPreambleDetect 0x800000 ++#define bCCKFastFalseCCA 0x400000 ++#define bCCKChEstStart 0x300000 ++#define bCCKCCACount 0x080000 ++#define bCCKcs_lim 0x070000 ++#define bCCKBistMode 0x80000000 ++#define bCCKCCAMask 0x40000000 ++#define bCCKTxDACPhase 0x4 ++#define bCCKRxADCPhase 0x20000000 //r_rx_clk ++#define bCCKr_cp_mode0 0x0100 ++#define bCCKTxDCOffset 0xf0 ++#define bCCKRxDCOffset 0xf ++#define bCCKCCAMode 0xc000 ++#define bCCKFalseCS_lim 0x3f00 ++#define bCCKCS_ratio 0xc00000 ++#define bCCKCorgBit_sel 0x300000 ++#define bCCKPD_lim 0x0f0000 ++#define bCCKNewCCA 0x80000000 ++#define bCCKRxHPofIG 0x8000 ++#define bCCKRxIG 0x7f00 ++#define bCCKLNAPolarity 0x800000 ++#define bCCKRx1stGain 0x7f0000 ++#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity ++#define bCCKRxAGCSatLevel 0x1f000000 ++#define bCCKRxAGCSatCount 0xe0 ++#define bCCKRxRFSettle 0x1f //AGCsamp_dly ++#define bCCKFixedRxAGC 0x8000 ++//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 ++#define bCCKAntennaPolarity 0x2000 ++#define bCCKTxFilterType 0x0c00 ++#define bCCKRxAGCReportType 0x0300 ++#define bCCKRxDAGCEn 0x80000000 ++#define bCCKRxDAGCPeriod 0x20000000 ++#define bCCKRxDAGCSatLevel 0x1f000000 ++#define bCCKTimingRecovery 0x800000 ++#define bCCKTxC0 0x3f0000 ++#define bCCKTxC1 0x3f000000 ++#define bCCKTxC2 0x3f ++#define bCCKTxC3 0x3f00 ++#define bCCKTxC4 0x3f0000 ++#define bCCKTxC5 0x3f000000 ++#define bCCKTxC6 0x3f ++#define bCCKTxC7 0x3f00 ++#define bCCKDebugPort 0xff0000 ++#define bCCKDACDebug 0x0f000000 ++#define bCCKFalseAlarmEnable 0x8000 ++#define bCCKFalseAlarmRead 0x4000 ++#define bCCKTRSSI 0x7f ++#define bCCKRxAGCReport 0xfe ++#define bCCKRxReport_AntSel 0x80000000 ++#define bCCKRxReport_MFOff 0x40000000 ++#define bCCKRxRxReport_SQLoss 0x20000000 ++#define bCCKRxReport_Pktloss 0x10000000 ++#define bCCKRxReport_Lockedbit 0x08000000 ++#define bCCKRxReport_RateError 0x04000000 ++#define bCCKRxReport_RxRate 0x03000000 ++#define bCCKRxFACounterLower 0xff ++#define bCCKRxFACounterUpper 0xff000000 ++#define bCCKRxHPAGCStart 0xe000 ++#define bCCKRxHPAGCFinal 0x1c00 ++#define bCCKRxFalseAlarmEnable 0x8000 ++#define bCCKFACounterFreeze 0x4000 ++#define bCCKTxPathSel 0x10000000 ++#define bCCKDefaultRxPath 0xc000000 ++#define bCCKOptionRxPath 0x3000000 ++ ++// 5. PageC(0xC00) ++#define bNumOfSTF 0x3 // Useless ++#define bShift_L 0xc0 ++#define bGI_TH 0xc ++#define bRxPathA 0x1 ++#define bRxPathB 0x2 ++#define bRxPathC 0x4 ++#define bRxPathD 0x8 ++#define bTxPathA 0x1 ++#define bTxPathB 0x2 ++#define bTxPathC 0x4 ++#define bTxPathD 0x8 ++#define bTRSSIFreq 0x200 ++#define bADCBackoff 0x3000 ++#define bDFIRBackoff 0xc000 ++#define bTRSSILatchPhase 0x10000 ++#define bRxIDCOffset 0xff ++#define bRxQDCOffset 0xff00 ++#define bRxDFIRMode 0x1800000 ++#define bRxDCNFType 0xe000000 ++#define bRXIQImb_A 0x3ff ++#define bRXIQImb_B 0xfc00 ++#define bRXIQImb_C 0x3f0000 ++#define bRXIQImb_D 0xffc00000 ++#define bDC_dc_Notch 0x60000 ++#define bRxNBINotch 0x1f000000 ++#define bPD_TH 0xf ++#define bPD_TH_Opt2 0xc000 ++#define bPWED_TH 0x700 ++#define bIfMF_Win_L 0x800 ++#define bPD_Option 0x1000 ++#define bMF_Win_L 0xe000 ++#define bBW_Search_L 0x30000 ++#define bwin_enh_L 0xc0000 ++#define bBW_TH 0x700000 ++#define bED_TH2 0x3800000 ++#define bBW_option 0x4000000 ++#define bRatio_TH 0x18000000 ++#define bWindow_L 0xe0000000 ++#define bSBD_Option 0x1 ++#define bFrame_TH 0x1c ++#define bFS_Option 0x60 ++#define bDC_Slope_check 0x80 ++#define bFGuard_Counter_DC_L 0xe00 ++#define bFrame_Weight_Short 0x7000 ++#define bSub_Tune 0xe00000 ++#define bFrame_DC_Length 0xe000000 ++#define bSBD_start_offset 0x30000000 ++#define bFrame_TH_2 0x7 ++#define bFrame_GI2_TH 0x38 ++#define bGI2_Sync_en 0x40 ++#define bSarch_Short_Early 0x300 ++#define bSarch_Short_Late 0xc00 ++#define bSarch_GI2_Late 0x70000 ++#define bCFOAntSum 0x1 ++#define bCFOAcc 0x2 ++#define bCFOStartOffset 0xc ++#define bCFOLookBack 0x70 ++#define bCFOSumWeight 0x80 ++#define bDAGCEnable 0x10000 ++#define bTXIQImb_A 0x3ff ++#define bTXIQImb_B 0xfc00 ++#define bTXIQImb_C 0x3f0000 ++#define bTXIQImb_D 0xffc00000 ++#define bTxIDCOffset 0xff ++#define bTxQDCOffset 0xff00 ++#define bTxDFIRMode 0x10000 ++#define bTxPesudoNoiseOn 0x4000000 ++#define bTxPesudoNoise_A 0xff ++#define bTxPesudoNoise_B 0xff00 ++#define bTxPesudoNoise_C 0xff0000 ++#define bTxPesudoNoise_D 0xff000000 ++#define bCCADropOption 0x20000 ++#define bCCADropThres 0xfff00000 ++#define bEDCCA_H 0xf ++#define bEDCCA_L 0xf0 ++#define bLambda_ED 0x300 ++#define bRxInitialGain 0x7f ++#define bRxAntDivEn 0x80 ++#define bRxAGCAddressForLNA 0x7f00 ++#define bRxHighPowerFlow 0x8000 ++#define bRxAGCFreezeThres 0xc0000 ++#define bRxFreezeStep_AGC1 0x300000 ++#define bRxFreezeStep_AGC2 0xc00000 ++#define bRxFreezeStep_AGC3 0x3000000 ++#define bRxFreezeStep_AGC0 0xc000000 ++#define bRxRssi_Cmp_En 0x10000000 ++#define bRxQuickAGCEn 0x20000000 ++#define bRxAGCFreezeThresMode 0x40000000 ++#define bRxOverFlowCheckType 0x80000000 ++#define bRxAGCShift 0x7f ++#define bTRSW_Tri_Only 0x80 ++#define bPowerThres 0x300 ++#define bRxAGCEn 0x1 ++#define bRxAGCTogetherEn 0x2 ++#define bRxAGCMin 0x4 ++#define bRxHP_Ini 0x7 ++#define bRxHP_TRLNA 0x70 ++#define bRxHP_RSSI 0x700 ++#define bRxHP_BBP1 0x7000 ++#define bRxHP_BBP2 0x70000 ++#define bRxHP_BBP3 0x700000 ++#define bRSSI_H 0x7f0000 //the threshold for high power ++#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity ++#define bRxSettle_TRSW 0x7 ++#define bRxSettle_LNA 0x38 ++#define bRxSettle_RSSI 0x1c0 ++#define bRxSettle_BBP 0xe00 ++#define bRxSettle_RxHP 0x7000 ++#define bRxSettle_AntSW_RSSI 0x38000 ++#define bRxSettle_AntSW 0xc0000 ++#define bRxProcessTime_DAGC 0x300000 ++#define bRxSettle_HSSI 0x400000 ++#define bRxProcessTime_BBPPW 0x800000 ++#define bRxAntennaPowerShift 0x3000000 ++#define bRSSITableSelect 0xc000000 ++#define bRxHP_Final 0x7000000 ++#define bRxHTSettle_BBP 0x7 ++#define bRxHTSettle_HSSI 0x8 ++#define bRxHTSettle_RxHP 0x70 ++#define bRxHTSettle_BBPPW 0x80 ++#define bRxHTSettle_Idle 0x300 ++#define bRxHTSettle_Reserved 0x1c00 ++#define bRxHTRxHPEn 0x8000 ++#define bRxHTAGCFreezeThres 0x30000 ++#define bRxHTAGCTogetherEn 0x40000 ++#define bRxHTAGCMin 0x80000 ++#define bRxHTAGCEn 0x100000 ++#define bRxHTDAGCEn 0x200000 ++#define bRxHTRxHP_BBP 0x1c00000 ++#define bRxHTRxHP_Final 0xe0000000 ++#define bRxPWRatioTH 0x3 ++#define bRxPWRatioEn 0x4 ++#define bRxMFHold 0x3800 ++#define bRxPD_Delay_TH1 0x38 ++#define bRxPD_Delay_TH2 0x1c0 ++#define bRxPD_DC_COUNT_MAX 0x600 ++//#define bRxMF_Hold 0x3800 ++#define bRxPD_Delay_TH 0x8000 ++#define bRxProcess_Delay 0xf0000 ++#define bRxSearchrange_GI2_Early 0x700000 ++#define bRxFrame_Guard_Counter_L 0x3800000 ++#define bRxSGI_Guard_L 0xc000000 ++#define bRxSGI_Search_L 0x30000000 ++#define bRxSGI_TH 0xc0000000 ++#define bDFSCnt0 0xff ++#define bDFSCnt1 0xff00 ++#define bDFSFlag 0xf0000 ++#define bMFWeightSum 0x300000 ++#define bMinIdxTH 0x7f000000 ++#define bDAFormat 0x40000 ++#define bTxChEmuEnable 0x01000000 ++#define bTRSWIsolation_A 0x7f ++#define bTRSWIsolation_B 0x7f00 ++#define bTRSWIsolation_C 0x7f0000 ++#define bTRSWIsolation_D 0x7f000000 ++#define bExtLNAGain 0x7c00 ++ ++// 6. PageE(0xE00) ++#define bSTBCEn 0x4 // Useless ++#define bAntennaMapping 0x10 ++#define bNss 0x20 ++#define bCFOAntSumD 0x200 ++#define bPHYCounterReset 0x8000000 ++#define bCFOReportGet 0x4000000 ++#define bOFDMContinueTx 0x10000000 ++#define bOFDMSingleCarrier 0x20000000 ++#define bOFDMSingleTone 0x40000000 ++//#define bRxPath1 0x01 ++//#define bRxPath2 0x02 ++//#define bRxPath3 0x04 ++//#define bRxPath4 0x08 ++//#define bTxPath1 0x10 ++//#define bTxPath2 0x20 ++#define bHTDetect 0x100 ++#define bCFOEn 0x10000 ++#define bCFOValue 0xfff00000 ++#define bSigTone_Re 0x3f ++#define bSigTone_Im 0x7f00 ++#define bCounter_CCA 0xffff ++#define bCounter_ParityFail 0xffff0000 ++#define bCounter_RateIllegal 0xffff ++#define bCounter_CRC8Fail 0xffff0000 ++#define bCounter_MCSNoSupport 0xffff ++#define bCounter_FastSync 0xffff ++#define bShortCFO 0xfff ++#define bShortCFOTLength 12 //total ++#define bShortCFOFLength 11 //fraction ++#define bLongCFO 0x7ff ++#define bLongCFOTLength 11 ++#define bLongCFOFLength 11 ++#define bTailCFO 0x1fff ++#define bTailCFOTLength 13 ++#define bTailCFOFLength 12 ++#define bmax_en_pwdB 0xffff ++#define bCC_power_dB 0xffff0000 ++#define bnoise_pwdB 0xffff ++#define bPowerMeasTLength 10 ++#define bPowerMeasFLength 3 ++#define bRx_HT_BW 0x1 ++#define bRxSC 0x6 ++#define bRx_HT 0x8 ++#define bNB_intf_det_on 0x1 ++#define bIntf_win_len_cfg 0x30 ++#define bNB_Intf_TH_cfg 0x1c0 ++#define bRFGain 0x3f ++#define bTableSel 0x40 ++#define bTRSW 0x80 ++#define bRxSNR_A 0xff ++#define bRxSNR_B 0xff00 ++#define bRxSNR_C 0xff0000 ++#define bRxSNR_D 0xff000000 ++#define bSNREVMTLength 8 ++#define bSNREVMFLength 1 ++#define bCSI1st 0xff ++#define bCSI2nd 0xff00 ++#define bRxEVM1st 0xff0000 ++#define bRxEVM2nd 0xff000000 ++#define bSIGEVM 0xff ++#define bPWDB 0xff00 ++#define bSGIEN 0x10000 ++ ++#define bSFactorQAM1 0xf // Useless ++#define bSFactorQAM2 0xf0 ++#define bSFactorQAM3 0xf00 ++#define bSFactorQAM4 0xf000 ++#define bSFactorQAM5 0xf0000 ++#define bSFactorQAM6 0xf0000 ++#define bSFactorQAM7 0xf00000 ++#define bSFactorQAM8 0xf000000 ++#define bSFactorQAM9 0xf0000000 ++#define bCSIScheme 0x100000 ++ ++#define bNoiseLvlTopSet 0x3 // Useless ++#define bChSmooth 0x4 ++#define bChSmoothCfg1 0x38 ++#define bChSmoothCfg2 0x1c0 ++#define bChSmoothCfg3 0xe00 ++#define bChSmoothCfg4 0x7000 ++#define bMRCMode 0x800000 ++#define bTHEVMCfg 0x7000000 ++ ++#define bLoopFitType 0x1 // Useless ++#define bUpdCFO 0x40 ++#define bUpdCFOOffData 0x80 ++#define bAdvUpdCFO 0x100 ++#define bAdvTimeCtrl 0x800 ++#define bUpdClko 0x1000 ++#define bFC 0x6000 ++#define bTrackingMode 0x8000 ++#define bPhCmpEnable 0x10000 ++#define bUpdClkoLTF 0x20000 ++#define bComChCFO 0x40000 ++#define bCSIEstiMode 0x80000 ++#define bAdvUpdEqz 0x100000 ++#define bUChCfg 0x7000000 ++#define bUpdEqz 0x8000000 ++ ++#define bTxAGCRate18_06 0x7f7f7f7f // Useless ++#define bTxAGCRate54_24 0x7f7f7f7f ++#define bTxAGCRateMCS32 0x7f ++#define bTxAGCRateCCK 0x7f00 ++#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f ++#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f ++#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f ++#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f ++ ++//Rx Pseduo noise ++#define bRxPesudoNoiseOn 0x20000000 // Useless ++#define bRxPesudoNoise_A 0xff ++#define bRxPesudoNoise_B 0xff00 ++#define bRxPesudoNoise_C 0xff0000 ++#define bRxPesudoNoise_D 0xff000000 ++#define bPesudoNoiseState_A 0xffff ++#define bPesudoNoiseState_B 0xffff0000 ++#define bPesudoNoiseState_C 0xffff ++#define bPesudoNoiseState_D 0xffff0000 ++ ++//7. RF Register ++//Zebra1 ++#define bZebra1_HSSIEnable 0x8 // Useless ++#define bZebra1_TRxControl 0xc00 ++#define bZebra1_TRxGainSetting 0x07f ++#define bZebra1_RxCorner 0xc00 ++#define bZebra1_TxChargePump 0x38 ++#define bZebra1_RxChargePump 0x7 ++#define bZebra1_ChannelNum 0xf80 ++#define bZebra1_TxLPFBW 0x400 ++#define bZebra1_RxLPFBW 0x600 ++ ++//Zebra4 ++#define bRTL8256RegModeCtrl1 0x100 // Useless ++#define bRTL8256RegModeCtrl0 0x40 ++#define bRTL8256_TxLPFBW 0x18 ++#define bRTL8256_RxLPFBW 0x600 ++ ++//RTL8258 ++#define bRTL8258_TxLPFBW 0xc // Useless ++#define bRTL8258_RxLPFBW 0xc00 ++#define bRTL8258_RSSILPFBW 0xc0 ++ ++ ++// ++// Other Definition ++// ++ ++//byte endable for sb_write ++#define bByte0 0x1 // Useless ++#define bByte1 0x2 ++#define bByte2 0x4 ++#define bByte3 0x8 ++#define bWord0 0x3 ++#define bWord1 0xc ++#define bDWord 0xf ++ ++//for PutRegsetting & GetRegSetting BitMask ++#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f ++#define bMaskByte1 0xff00 ++#define bMaskByte2 0xff0000 ++#define bMaskByte3 0xff000000 ++#define bMaskHWord 0xffff0000 ++#define bMaskLWord 0x0000ffff ++#define bMaskDWord 0xffffffff ++#define bMaskH4Bits 0xf0000000 ++#define bMaskOFDM_D 0xffc00000 ++#define bMaskCCK 0x3f3f3f3f ++#define bMask12Bits 0xfff ++ ++//for PutRFRegsetting & GetRFRegSetting BitMask ++#if (RTL92SE_FPGA_VERIFY == 1) ++//#define bMask12Bits 0xfff // RF Reg mask bits ++//#define bMask20Bits 0xfff // RF Reg mask bits T65 RF ++#define bRFRegOffsetMask 0xfff ++#else ++//#define bMask12Bits 0xfffff // RF Reg mask bits ++//#define bMask20Bits 0xfffff // RF Reg mask bits T65 RF ++#define bRFRegOffsetMask 0xfffff ++#endif ++#define bEnable 0x1 // Useless ++#define bDisable 0x0 ++ ++#define LeftAntenna 0x0 // Useless ++#define RightAntenna 0x1 ++ ++#define tCheckTxStatus 500 //500ms // Useless ++#define tUpdateRxCounter 100 //100ms ++ ++#define rateCCK 0 // Useless ++#define rateOFDM 1 ++#define rateHT 2 ++ ++//define Register-End ++#define bPMAC_End 0x1ff // Useless ++#define bFPGAPHY0_End 0x8ff ++#define bFPGAPHY1_End 0x9ff ++#define bCCKPHY0_End 0xaff ++#define bOFDMPHY0_End 0xcff ++#define bOFDMPHY1_End 0xdff ++ ++//define max debug item in each debug page ++//#define bMaxItem_FPGA_PHY0 0x9 ++//#define bMaxItem_FPGA_PHY1 0x3 ++//#define bMaxItem_PHY_11B 0x16 ++//#define bMaxItem_OFDM_PHY0 0x29 ++//#define bMaxItem_OFDM_PHY1 0x0 ++ ++#define bPMACControl 0x0 // Useless ++#define bWMACControl 0x1 ++#define bWNICControl 0x2 ++ ++#if 0 ++#define ANTENNA_A 0x1 // Useless ++#define ANTENNA_B 0x2 ++#define ANTENNA_AB 0x3 // ANTENNA_A|ANTENNA_B ++ ++#define ANTENNA_C 0x4 ++#define ANTENNA_D 0x8 ++#endif ++ ++#define RCR_AAP BIT(0) // accept all physical address ++#define RCR_APM BIT(1) // accept physical match ++#define RCR_AM BIT(2) // accept multicast ++#define RCR_AB BIT(3) // accept broadcast ++#define RCR_ACRC32 BIT(5) // accept error packet ++#define RCR_9356SEL BIT(6) ++#define RCR_AICV BIT(12) // Accept ICV error packet ++#define RCR_RXFTH0 (BIT(13)|BIT(14)|BIT(15)) // Rx FIFO threshold ++#define RCR_ADF BIT(18) // Accept Data(frame type) frame ++#define RCR_ACF BIT(19) // Accept control frame ++#define RCR_AMF BIT(20) // Accept management frame ++#define RCR_ADD3 BIT(21) ++#define RCR_APWRMGT BIT(22) // Accept power management packet ++#define RCR_CBSSID BIT(23) // Accept BSSID match packet ++#define RCR_ENMARP BIT(28) // enable mac auto reset phy ++#define RCR_EnCS1 BIT(29) // enable carrier sense method 1 ++#define RCR_EnCS2 BIT(30) // enable carrier sense method 2 ++#define RCR_OnlyErlPkt BIT(31) // Rx Early mode is performed for packet size greater than 1536 ++ ++/*--------------------------Define Parameters-------------------------------*/ ++ ++ ++#endif //__INC_HAL8192SPHYREG_H +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_p2p.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_p2p.h +new file mode 100644 +index 000000000000..b230faf453e5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_p2p.h +@@ -0,0 +1,160 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_P2P_H_ ++#define __RTW_P2P_H_ ++ ++#include ++ ++u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8* pssid, u8 ussidlen, u8* pdev_raddr ); ++u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 status_code); ++u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++#ifdef CONFIG_WFD ++u32 build_probe_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_probe_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 tunneled); ++u32 build_beacon_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_nego_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_nego_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_nego_confirm_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_invitation_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_invitation_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_assoc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_assoc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_provdisc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++u32 build_provdisc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf); ++#endif //CONFIG_WFD ++ ++u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len); ++u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len, struct sta_info *psta); ++u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len); ++u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe, uint len); ++u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len); ++u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe); ++u8 process_p2p_group_negotation_req( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ); ++u8 process_p2p_group_negotation_resp( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ); ++u8 process_p2p_group_negotation_confirm( struct wifidirect_info *pwdinfo, u8 *pframe, uint len ); ++u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len); ++ ++void p2p_protocol_wk_hdl(_adapter *padapter, int intCmdType); ++ ++#ifdef CONFIG_P2P_PS ++void process_p2p_ps_ie(PADAPTER padapter, u8 *IEs, u32 IELength); ++void p2p_ps_wk_hdl(_adapter *padapter, u8 p2p_ps_state); ++u8 p2p_ps_wk_cmd(_adapter*padapter, u8 p2p_ps_state, u8 enqueue); ++#endif // CONFIG_P2P_PS ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++void rtw_init_cfg80211_wifidirect_info( _adapter* padapter); ++int rtw_p2p_check_frames(_adapter *padapter, const u8 *buf, u32 len, u8 tx); ++void rtw_append_wfd_ie(_adapter *padapter, u8 *buf, u32 *len); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++void reset_global_wifidirect_info( _adapter* padapter ); ++int rtw_init_wifi_display_info(_adapter* padapter); ++void rtw_init_wifidirect_timers(_adapter* padapter); ++void rtw_init_wifidirect_addrs(_adapter* padapter, u8 *dev_addr, u8 *iface_addr); ++void init_wifidirect_info( _adapter* padapter, enum P2P_ROLE role); ++int rtw_p2p_enable(_adapter *padapter, enum P2P_ROLE role); ++ ++static inline void _rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state) ++{ ++ if(wdinfo->p2p_state != state) { ++ //wdinfo->pre_p2p_state = wdinfo->p2p_state; ++ wdinfo->p2p_state = state; ++ } ++} ++static inline void _rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state) ++{ ++ if(wdinfo->pre_p2p_state != state) { ++ wdinfo->pre_p2p_state = state; ++ } ++} ++#if 0 ++static inline void _rtw_p2p_restore_state(struct wifidirect_info *wdinfo) ++{ ++ if(wdinfo->pre_p2p_state != -1) { ++ wdinfo->p2p_state = wdinfo->pre_p2p_state; ++ wdinfo->pre_p2p_state = -1; ++ } ++} ++#endif ++static inline void _rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role) ++{ ++ if(wdinfo->role != role) { ++ wdinfo->role = role; ++ } ++} ++static inline int _rtw_p2p_state(struct wifidirect_info *wdinfo) ++{ ++ return wdinfo->p2p_state; ++} ++static inline int _rtw_p2p_pre_state(struct wifidirect_info *wdinfo) ++{ ++ return wdinfo->pre_p2p_state; ++} ++static inline int _rtw_p2p_role(struct wifidirect_info *wdinfo) ++{ ++ return wdinfo->role; ++} ++static inline bool _rtw_p2p_chk_state(struct wifidirect_info *wdinfo, enum P2P_STATE state) ++{ ++ return wdinfo->p2p_state == state; ++} ++static inline bool _rtw_p2p_chk_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role) ++{ ++ return wdinfo->role == role; ++} ++ ++#ifdef CONFIG_DBG_P2P ++void dbg_rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line); ++void dbg_rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line); ++//void dbg_rtw_p2p_restore_state(struct wifidirect_info *wdinfo, const char *caller, int line); ++void dbg_rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role, const char *caller, int line); ++#define rtw_p2p_set_state(wdinfo, state) dbg_rtw_p2p_set_state(wdinfo, state, __FUNCTION__, __LINE__) ++#define rtw_p2p_set_pre_state(wdinfo, state) dbg_rtw_p2p_set_pre_state(wdinfo, state, __FUNCTION__, __LINE__) ++#define rtw_p2p_set_role(wdinfo, role) dbg_rtw_p2p_set_role(wdinfo, role, __FUNCTION__, __LINE__) ++//#define rtw_p2p_restore_state(wdinfo) dbg_rtw_p2p_restore_state(wdinfo, __FUNCTION__, __LINE__) ++#else //CONFIG_DBG_P2P ++#define rtw_p2p_set_state(wdinfo, state) _rtw_p2p_set_state(wdinfo, state) ++#define rtw_p2p_set_pre_state(wdinfo, state) _rtw_p2p_set_pre_state(wdinfo, state) ++#define rtw_p2p_set_role(wdinfo, role) _rtw_p2p_set_role(wdinfo, role) ++//#define rtw_p2p_restore_state(wdinfo) _rtw_p2p_restore_state(wdinfo) ++#endif //CONFIG_DBG_P2P ++ ++#define rtw_p2p_state(wdinfo) _rtw_p2p_state(wdinfo) ++#define rtw_p2p_pre_state(wdinfo) _rtw_p2p_pre_state(wdinfo) ++#define rtw_p2p_role(wdinfo) _rtw_p2p_role(wdinfo) ++#define rtw_p2p_chk_state(wdinfo, state) _rtw_p2p_chk_state(wdinfo, state) ++#define rtw_p2p_chk_role(wdinfo, role) _rtw_p2p_chk_role(wdinfo, role) ++ ++#define rtw_p2p_findphase_ex_set(wdinfo, value) \ ++ (wdinfo)->find_phase_state_exchange_cnt = (value) ++ ++//is this find phase exchange for social channel scan? ++#define rtw_p2p_findphase_ex_is_social(wdinfo) \ ++ (wdinfo)->find_phase_state_exchange_cnt >= P2P_FINDPHASE_EX_SOCIAL_FIRST ++ ++//should we need find phase exchange anymore? ++#define rtw_p2p_findphase_ex_is_needed(wdinfo) \ ++ ((wdinfo)->find_phase_state_exchange_cnt < P2P_FINDPHASE_EX_MAX && \ ++ (wdinfo)->find_phase_state_exchange_cnt != P2P_FINDPHASE_EX_NONE) ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_pwrctrl.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_pwrctrl.h +new file mode 100644 +index 000000000000..a867da2430bf +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_pwrctrl.h +@@ -0,0 +1,362 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_PWRCTRL_H_ ++#define __RTW_PWRCTRL_H_ ++ ++#include ++#include ++#include ++ ++#ifdef CONFIG_HAS_EARLYSUSPEND ++#include ++#endif //CONFIG_HAS_EARLYSUSPEND ++ ++ ++#define FW_PWR0 0 ++#define FW_PWR1 1 ++#define FW_PWR2 2 ++#define FW_PWR3 3 ++ ++ ++#define HW_PWR0 7 ++#define HW_PWR1 6 ++#define HW_PWR2 2 ++#define HW_PWR3 0 ++#define HW_PWR4 8 ++ ++#define FW_PWRMSK 0x7 ++ ++ ++#define XMIT_ALIVE BIT(0) ++#define RECV_ALIVE BIT(1) ++#define CMD_ALIVE BIT(2) ++#define EVT_ALIVE BIT(3) ++ ++ ++enum Power_Mgnt ++{ ++ PS_MODE_ACTIVE = 0 , ++ PS_MODE_MIN , ++ PS_MODE_MAX , ++ PS_MODE_DTIM , ++ PS_MODE_VOIP , ++ PS_MODE_UAPSD_WMM , ++ PS_MODE_UAPSD , ++ PS_MODE_IBSS , ++ PS_MODE_WWLAN , ++ PM_Radio_Off , ++ PM_Card_Disable , ++ PS_MODE_NUM ++}; ++ ++ ++/* ++ BIT[2:0] = HW state ++ BIT[3] = Protocol PS state, 0: register active state , 1: register sleep state ++ BIT[4] = sub-state ++*/ ++ ++#define PS_DPS BIT(0) ++#define PS_LCLK (PS_DPS) ++#define PS_RF_OFF BIT(1) ++#define PS_ALL_ON BIT(2) ++#define PS_ST_ACTIVE BIT(3) ++ ++#define PS_ISR_ENABLE BIT(4) ++#define PS_IMR_ENABLE BIT(5) ++#define PS_ACK BIT(6) ++#define PS_TOGGLE BIT(7) ++ ++#define PS_STATE_MASK (0x0F) ++#define PS_STATE_HW_MASK (0x07) ++#define PS_SEQ_MASK (0xc0) ++ ++#define PS_STATE(x) (PS_STATE_MASK & (x)) ++#define PS_STATE_HW(x) (PS_STATE_HW_MASK & (x)) ++#define PS_SEQ(x) (PS_SEQ_MASK & (x)) ++ ++#define PS_STATE_S0 (PS_DPS) ++#define PS_STATE_S1 (PS_LCLK) ++#define PS_STATE_S2 (PS_RF_OFF) ++#define PS_STATE_S3 (PS_ALL_ON) ++#define PS_STATE_S4 ((PS_ST_ACTIVE) | (PS_ALL_ON)) ++ ++ ++#define PS_IS_RF_ON(x) ((x) & (PS_ALL_ON)) ++#define PS_IS_ACTIVE(x) ((x) & (PS_ST_ACTIVE)) ++#define CLR_PS_STATE(x) ((x) = ((x) & (0xF0))) ++ ++ ++struct reportpwrstate_parm { ++ unsigned char mode; ++ unsigned char state; //the CPWM value ++ unsigned short rsvd; ++}; ++ ++ ++typedef _sema _pwrlock; ++ ++ ++__inline static void _init_pwrlock(_pwrlock *plock) ++{ ++ _rtw_init_sema(plock, 1); ++} ++ ++__inline static void _free_pwrlock(_pwrlock *plock) ++{ ++ _rtw_free_sema(plock); ++} ++ ++ ++__inline static void _enter_pwrlock(_pwrlock *plock) ++{ ++ _rtw_down_sema(plock); ++} ++ ++ ++__inline static void _exit_pwrlock(_pwrlock *plock) ++{ ++ _rtw_up_sema(plock); ++} ++ ++#define LPS_DELAY_TIME 1*HZ // 1 sec ++ ++#define EXE_PWR_NONE 0x01 ++#define EXE_PWR_IPS 0x02 ++#define EXE_PWR_LPS 0x04 ++ ++// RF state. ++typedef enum _rt_rf_power_state ++{ ++ rf_on, // RF is on after RFSleep or RFOff ++ rf_sleep, // 802.11 Power Save mode ++ rf_off, // HW/SW Radio OFF or Inactive Power Save ++ //=====Add the new RF state above this line=====// ++ rf_max ++}rt_rf_power_state; ++ ++// RF Off Level for IPS or HW/SW radio off ++#define RT_RF_OFF_LEVL_ASPM BIT(0) // PCI ASPM ++#define RT_RF_OFF_LEVL_CLK_REQ BIT(1) // PCI clock request ++#define RT_RF_OFF_LEVL_PCI_D3 BIT(2) // PCI D3 mode ++#define RT_RF_OFF_LEVL_HALT_NIC BIT(3) // NIC halt, re-initialize hw parameters ++#define RT_RF_OFF_LEVL_FREE_FW BIT(4) // FW free, re-download the FW ++#define RT_RF_OFF_LEVL_FW_32K BIT(5) // FW in 32k ++#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT(6) // Always enable ASPM and Clock Req in initialization. ++#define RT_RF_LPS_DISALBE_2R BIT(30) // When LPS is on, disable 2R if no packet is received or transmittd. ++#define RT_RF_LPS_LEVEL_ASPM BIT(31) // LPS with ASPM ++ ++#define RT_IN_PS_LEVEL(ppsc, _PS_FLAG) ((ppsc->cur_ps_level & _PS_FLAG) ? _TRUE : _FALSE) ++#define RT_CLEAR_PS_LEVEL(ppsc, _PS_FLAG) (ppsc->cur_ps_level &= (~(_PS_FLAG))) ++#define RT_SET_PS_LEVEL(ppsc, _PS_FLAG) (ppsc->cur_ps_level |= _PS_FLAG) ++ ++ ++enum _PS_BBRegBackup_ { ++ PSBBREG_RF0 = 0, ++ PSBBREG_RF1, ++ PSBBREG_RF2, ++ PSBBREG_AFE0, ++ PSBBREG_TOTALCNT ++}; ++ ++enum { // for ips_mode ++ IPS_NONE=0, ++ IPS_NORMAL, ++ IPS_LEVEL_2, ++}; ++ ++struct pwrctrl_priv ++{ ++ _pwrlock lock; ++ volatile u8 rpwm; // requested power state for fw ++ volatile u8 cpwm; // fw current power state. updated when 1. read from HCPWM 2. driver lowers power level ++ volatile u8 tog; // toggling ++ volatile u8 cpwm_tog; // toggling ++ u8 pwr_mode; ++ u8 smart_ps; ++ u32 alives; ++ ++ u8 b_hw_radio_off; ++ u8 reg_rfoff; ++ u8 reg_pdnmode; //powerdown mode ++ u32 rfoff_reason; ++ ++ //RF OFF Level ++ u32 cur_ps_level; ++ u32 reg_rfps_level; ++ ++ ++ ++#ifdef CONFIG_PCI_HCI ++ //just for PCIE ASPM ++ u8 b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00. ++ u8 b_support_backdoor; ++ ++ //just for PCIE ASPM ++ u8 const_amdpci_aspm; ++#endif ++ ++ uint ips_enter_cnts; ++ uint ips_leave_cnts; ++ ++ u8 ips_mode; ++ u8 ips_mode_req; // used to accept the mode setting request, will update to ipsmode later ++ uint bips_processing; ++ u32 ips_deny_time; /* will deny IPS when system time is smaller than this */ ++ u8 ps_processing; /* temporarily used to mark whether in rtw_ps_processor */ ++ ++ u8 bLeisurePs; ++ u8 LpsIdleCount; ++ u8 power_mgnt; ++ u8 bFwCurrentInPSMode; ++ u32 DelayLPSLastTimeStamp; ++ ++ s32 pnp_current_pwr_state; ++ u8 pnp_bstop_trx; ++ ++ ++ u8 bInternalAutoSuspend; ++ u8 bInSuspend; ++ u8 bSupportRemoteWakeup; ++#ifdef CONFIG_WOWLAN ++ u8 wowlan_mode; ++ u8 wowlan_pattern; ++ u8 wowlan_magic; ++ u8 wowlan_unicast; ++ u8 wowlan_pattern_idx; ++ u32 wowlan_pattern_context[8][5]; ++#endif // CONFIG_WOWLAN ++ _timer pwr_state_check_timer; ++ int pwr_state_check_interval; ++ u8 pwr_state_check_cnts; ++ ++ int ps_flag; ++ ++ rt_rf_power_state rf_pwrstate;//cur power state ++ //rt_rf_power_state current_rfpwrstate; ++ rt_rf_power_state change_rfpwrstate; ++ ++ u8 bHWPowerdown;//if support hw power down ++ u8 bHWPwrPindetect; ++ u8 bkeepfwalive; ++ u8 brfoffbyhw; ++ unsigned long PS_BBRegBackup[PSBBREG_TOTALCNT]; ++ ++ #ifdef CONFIG_RESUME_IN_WORKQUEUE ++ struct workqueue_struct *rtw_workqueue; ++ _workitem resume_work; ++ #endif ++ ++ #ifdef CONFIG_HAS_EARLYSUSPEND ++ struct early_suspend early_suspend; ++ u8 do_late_resume; ++ #endif //CONFIG_HAS_EARLYSUSPEND ++ ++ #ifdef CONFIG_ANDROID_POWER ++ android_early_suspend_t early_suspend; ++ u8 do_late_resume; ++ #endif ++ ++}; ++ ++#define rtw_get_ips_mode_req(pwrctrlpriv) \ ++ (pwrctrlpriv)->ips_mode_req ++ ++#define rtw_ips_mode_req(pwrctrlpriv, ips_mode) \ ++ (pwrctrlpriv)->ips_mode_req = (ips_mode) ++ ++#define RTW_PWR_STATE_CHK_INTERVAL 2000 ++ ++#define _rtw_set_pwr_state_check_timer(pwrctrlpriv, ms) \ ++ do { \ ++ /*DBG_871X("%s _rtw_set_pwr_state_check_timer(%p, %d)\n", __FUNCTION__, (pwrctrlpriv), (ms));*/ \ ++ _set_timer(&(pwrctrlpriv)->pwr_state_check_timer, (ms)); \ ++ } while(0) ++ ++#define rtw_set_pwr_state_check_timer(pwrctrlpriv) \ ++ _rtw_set_pwr_state_check_timer((pwrctrlpriv), (pwrctrlpriv)->pwr_state_check_interval) ++ ++extern void rtw_init_pwrctrl_priv(_adapter *adapter); ++extern void rtw_free_pwrctrl_priv(_adapter * adapter); ++ ++#ifdef CONFIG_LPS_LCLK ++extern s32 rtw_register_tx_alive(PADAPTER padapter); ++extern void rtw_unregister_tx_alive(PADAPTER padapter); ++extern s32 rtw_register_rx_alive(PADAPTER padapter); ++extern void rtw_unregister_rx_alive(PADAPTER padapter); ++extern s32 rtw_register_cmd_alive(PADAPTER padapter); ++extern void rtw_unregister_cmd_alive(PADAPTER padapter); ++extern s32 rtw_register_evt_alive(PADAPTER padapter); ++extern void rtw_unregister_evt_alive(PADAPTER padapter); ++extern void cpwm_int_hdl(PADAPTER padapter, struct reportpwrstate_parm *preportpwrstate); ++#endif ++ ++extern void rtw_set_ps_mode(_adapter * padapter, u8 ps_mode, u8 smart_ps); ++extern void rtw_set_rpwm(_adapter * padapter, u8 val8); ++extern void LeaveAllPowerSaveMode(PADAPTER Adapter); ++#ifdef CONFIG_IPS ++void _ips_enter(_adapter * padapter); ++void ips_enter(_adapter * padapter); ++int _ips_leave(_adapter * padapter); ++int ips_leave(_adapter * padapter); ++#endif ++ ++void rtw_ps_processor(_adapter*padapter); ++ ++#ifdef CONFIG_AUTOSUSPEND ++int autoresume_enter(_adapter* padapter); ++#endif ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter ); ++#endif ++ ++ ++#ifdef CONFIG_LPS ++void LPS_Enter(PADAPTER padapter); ++void LPS_Leave(PADAPTER padapter); ++#endif ++ ++#ifdef CONFIG_RESUME_IN_WORKQUEUE ++void rtw_resume_in_workqueue(struct pwrctrl_priv *pwrpriv); ++#endif //CONFIG_RESUME_IN_WORKQUEUE ++ ++#if defined(CONFIG_HAS_EARLYSUSPEND ) || defined(CONFIG_ANDROID_POWER) ++bool rtw_is_earlysuspend_registered(struct pwrctrl_priv *pwrpriv); ++bool rtw_is_do_late_resume(struct pwrctrl_priv *pwrpriv); ++void rtw_set_do_late_resume(struct pwrctrl_priv *pwrpriv, bool enable); ++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv); ++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv); ++#else ++#define rtw_is_earlysuspend_registered(pwrpriv) _FALSE ++#define rtw_is_do_late_resume(pwrpriv) _FALSE ++#define rtw_set_do_late_resume(pwrpriv, enable) do {} while (0) ++#define rtw_register_early_suspend(pwrpriv) do {} while (0) ++#define rtw_unregister_early_suspend(pwrpriv) do {} while (0) ++#endif /* CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER */ ++ ++u8 rtw_interface_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id,u8* val); ++void rtw_set_ips_deny(_adapter *padapter, u32 ms); ++int _rtw_pwr_wakeup(_adapter *padapter, u32 ips_deffer_ms, const char *caller); ++#define rtw_pwr_wakeup(adapter) _rtw_pwr_wakeup(adapter, RTW_PWR_STATE_CHK_INTERVAL, __FUNCTION__) ++#define rtw_pwr_wakeup_ex(adapter, ips_deffer_ms) _rtw_pwr_wakeup(adapter, ips_deffer_ms, __FUNCTION__) ++int rtw_pm_set_ips(_adapter *padapter, u8 mode); ++int rtw_pm_set_lps(_adapter *padapter, u8 mode); ++ ++#endif //__RTL871X_PWRCTRL_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_qos.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_qos.h +new file mode 100644 +index 000000000000..bd15f932ba39 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_qos.h +@@ -0,0 +1,39 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ ++#ifndef _RTW_QOS_H_ ++#define _RTW_QOS_H_ ++#include ++#include ++ ++ ++ ++ ++ ++ ++struct qos_priv { ++ ++ unsigned int qos_option; //bit mask option: u-apsd, s-apsd, ts, block ack... ++ ++}; ++ ++ ++#endif //_RTL871X_QOS_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_recv.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_recv.h +new file mode 100644 +index 000000000000..28dca0021d32 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_recv.h +@@ -0,0 +1,730 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_RECV_H_ ++#define _RTW_RECV_H_ ++ ++#include ++#include ++#include ++ ++ ++#define NR_RECVFRAME 256 ++ ++#define RXFRAME_ALIGN 8 ++#define RXFRAME_ALIGN_SZ (1<signal_stat_timer, (recvpriv)->signal_stat_sampling_interval) ++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS ++ ++struct sta_recv_priv { ++ ++ _lock lock; ++ sint option; ++ ++ //_queue blk_strms[MAX_RX_NUMBLKS]; ++ _queue defrag_q; //keeping the fragment frame until defrag ++ ++ struct stainfo_rxcache rxcache; ++ ++ //uint sta_rx_bytes; ++ //uint sta_rx_pkts; ++ //uint sta_rx_fail; ++ ++}; ++ ++ ++struct recv_buf ++{ ++ _list list; ++ ++ _lock recvbuf_lock; ++ ++ u32 ref_cnt; ++ ++ PADAPTER adapter; ++ ++ u8 *pbuf; ++ u8 *pallocated_buf; ++ ++ u32 len; ++ u8 *phead; ++ u8 *pdata; ++ u8 *ptail; ++ u8 *pend; ++ ++#ifdef CONFIG_USB_HCI ++ ++ #if defined(PLATFORM_OS_XP)||defined(PLATFORM_LINUX)||defined(PLATFORM_FREEBSD) ++ PURB purb; ++ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */ ++ u32 alloc_sz; ++ #endif ++ ++ #ifdef PLATFORM_OS_XP ++ PIRP pirp; ++ #endif ++ ++ #ifdef PLATFORM_OS_CE ++ USB_TRANSFER usb_transfer_read_port; ++ #endif ++ ++ u8 irp_pending; ++ int transfer_len; ++ ++#endif ++ ++#ifdef PLATFORM_LINUX ++ _pkt *pskb; ++ u8 reuse; ++#endif ++#ifdef PLATFORM_FREEBSD //skb solution ++ struct sk_buff *pskb; ++ u8 reuse; ++#endif //PLATFORM_FREEBSD //skb solution ++}; ++ ++ ++/* ++ head -----> ++ ++ data -----> ++ ++ payload ++ ++ tail -----> ++ ++ ++ end -----> ++ ++ len = (unsigned int )(tail - data); ++ ++*/ ++struct recv_frame_hdr ++{ ++ _list list; ++#ifndef CONFIG_BSD_RX_USE_MBUF ++ struct sk_buff *pkt; ++ struct sk_buff *pkt_newalloc; ++#else // CONFIG_BSD_RX_USE_MBUF ++ _pkt *pkt; ++ _pkt *pkt_newalloc; ++#endif // CONFIG_BSD_RX_USE_MBUF ++ ++ _adapter *adapter; ++ ++ u8 fragcnt; ++ ++ int frame_tag; ++ ++ struct rx_pkt_attrib attrib; ++ ++ uint len; ++ u8 *rx_head; ++ u8 *rx_data; ++ u8 *rx_tail; ++ u8 *rx_end; ++ ++ void *precvbuf; ++ ++ ++ // ++ struct sta_info *psta; ++ ++ //for A-MPDU Rx reordering buffer control ++ struct recv_reorder_ctrl *preorder_ctrl; ++ ++}; ++ ++ ++union recv_frame{ ++ ++ union{ ++ _list list; ++ struct recv_frame_hdr hdr; ++ uint mem[RECVFRAME_HDR_ALIGN>>2]; ++ }u; ++ ++ //uint mem[MAX_RXSZ>>2]; ++ ++}; ++ ++ ++extern union recv_frame *_rtw_alloc_recvframe (_queue *pfree_recv_queue); //get a free recv_frame from pfree_recv_queue ++extern union recv_frame *rtw_alloc_recvframe (_queue *pfree_recv_queue); //get a free recv_frame from pfree_recv_queue ++extern void rtw_init_recvframe(union recv_frame *precvframe ,struct recv_priv *precvpriv); ++extern int rtw_free_recvframe(union recv_frame *precvframe, _queue *pfree_recv_queue); ++ ++#define rtw_dequeue_recvframe(queue) rtw_alloc_recvframe(queue) ++extern int _rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue); ++extern int rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue); ++ ++extern void rtw_free_recvframe_queue(_queue *pframequeue, _queue *pfree_recv_queue); ++u32 rtw_free_uc_swdec_pending_queue(_adapter *adapter); ++ ++sint rtw_enqueue_recvbuf_to_head(struct recv_buf *precvbuf, _queue *queue); ++sint rtw_enqueue_recvbuf(struct recv_buf *precvbuf, _queue *queue); ++struct recv_buf *rtw_dequeue_recvbuf (_queue *queue); ++ ++void rtw_reordering_ctrl_timeout_handler(void *pcontext); ++ ++__inline static u8 *get_rxmem(union recv_frame *precvframe) ++{ ++ //always return rx_head... ++ if(precvframe==NULL) ++ return NULL; ++ ++ return precvframe->u.hdr.rx_head; ++} ++ ++__inline static u8 *get_rx_status(union recv_frame *precvframe) ++{ ++ ++ return get_rxmem(precvframe); ++ ++} ++ ++__inline static u8 *get_recvframe_data(union recv_frame *precvframe) ++{ ++ ++ //alwasy return rx_data ++ if(precvframe==NULL) ++ return NULL; ++ ++ return precvframe->u.hdr.rx_data; ++ ++} ++ ++__inline static u8 *recvframe_push(union recv_frame *precvframe, sint sz) ++{ ++ // append data before rx_data ++ ++ /* add data to the start of recv_frame ++ * ++ * This function extends the used data area of the recv_frame at the buffer ++ * start. rx_data must be still larger than rx_head, after pushing. ++ */ ++ ++ if(precvframe==NULL) ++ return NULL; ++ ++ ++ precvframe->u.hdr.rx_data -= sz ; ++ if( precvframe->u.hdr.rx_data < precvframe->u.hdr.rx_head ) ++ { ++ precvframe->u.hdr.rx_data += sz ; ++ return NULL; ++ } ++ ++ precvframe->u.hdr.len +=sz; ++ ++ return precvframe->u.hdr.rx_data; ++ ++} ++ ++ ++__inline static u8 *recvframe_pull(union recv_frame *precvframe, sint sz) ++{ ++ // rx_data += sz; move rx_data sz bytes hereafter ++ ++ //used for extract sz bytes from rx_data, update rx_data and return the updated rx_data to the caller ++ ++ ++ if(precvframe==NULL) ++ return NULL; ++ ++ ++ precvframe->u.hdr.rx_data += sz; ++ ++ if(precvframe->u.hdr.rx_data > precvframe->u.hdr.rx_tail) ++ { ++ precvframe->u.hdr.rx_data -= sz; ++ return NULL; ++ } ++ ++ precvframe->u.hdr.len -=sz; ++ ++ return precvframe->u.hdr.rx_data; ++ ++} ++ ++__inline static u8 *recvframe_put(union recv_frame *precvframe, sint sz) ++{ ++ // rx_tai += sz; move rx_tail sz bytes hereafter ++ ++ //used for append sz bytes from ptr to rx_tail, update rx_tail and return the updated rx_tail to the caller ++ //after putting, rx_tail must be still larger than rx_end. ++ unsigned char * prev_rx_tail; ++ ++ if(precvframe==NULL) ++ return NULL; ++ ++ prev_rx_tail = precvframe->u.hdr.rx_tail; ++ ++ precvframe->u.hdr.rx_tail += sz; ++ ++ if(precvframe->u.hdr.rx_tail > precvframe->u.hdr.rx_end) ++ { ++ precvframe->u.hdr.rx_tail -= sz; ++ return NULL; ++ } ++ ++ precvframe->u.hdr.len +=sz; ++ ++ return precvframe->u.hdr.rx_tail; ++ ++} ++ ++ ++ ++__inline static u8 *recvframe_pull_tail(union recv_frame *precvframe, sint sz) ++{ ++ // rmv data from rx_tail (by yitsen) ++ ++ //used for extract sz bytes from rx_end, update rx_end and return the updated rx_end to the caller ++ //after pulling, rx_end must be still larger than rx_data. ++ ++ if(precvframe==NULL) ++ return NULL; ++ ++ precvframe->u.hdr.rx_tail -= sz; ++ ++ if(precvframe->u.hdr.rx_tail < precvframe->u.hdr.rx_data) ++ { ++ precvframe->u.hdr.rx_tail += sz; ++ return NULL; ++ } ++ ++ precvframe->u.hdr.len -=sz; ++ ++ return precvframe->u.hdr.rx_tail; ++ ++} ++ ++ ++ ++__inline static _buffer * get_rxbuf_desc(union recv_frame *precvframe) ++{ ++ _buffer * buf_desc; ++ ++ if(precvframe==NULL) ++ return NULL; ++#ifdef PLATFORM_WINDOWS ++ NdisQueryPacket(precvframe->u.hdr.pkt, NULL, NULL, &buf_desc, NULL); ++#endif ++ ++ return buf_desc; ++} ++ ++ ++__inline static union recv_frame *rxmem_to_recvframe(u8 *rxmem) ++{ ++ //due to the design of 2048 bytes alignment of recv_frame, we can reference the union recv_frame ++ //from any given member of recv_frame. ++ // rxmem indicates the any member/address in recv_frame ++ ++ return (union recv_frame*)(((SIZE_PTR)rxmem >> RXFRAME_ALIGN) << RXFRAME_ALIGN); ++ ++} ++ ++__inline static union recv_frame *pkt_to_recvframe(_pkt *pkt) ++{ ++ ++ u8 * buf_star; ++ union recv_frame * precv_frame; ++#ifdef PLATFORM_WINDOWS ++ _buffer * buf_desc; ++ uint len; ++ ++ NdisQueryPacket(pkt, NULL, NULL, &buf_desc, &len); ++ NdisQueryBufferSafe(buf_desc, &buf_star, &len, HighPagePriority); ++#endif ++ precv_frame = rxmem_to_recvframe((unsigned char*)buf_star); ++ ++ return precv_frame; ++} ++ ++__inline static u8 *pkt_to_recvmem(_pkt *pkt) ++{ ++ // return the rx_head ++ ++ union recv_frame * precv_frame = pkt_to_recvframe(pkt); ++ ++ return precv_frame->u.hdr.rx_head; ++ ++} ++ ++__inline static u8 *pkt_to_recvdata(_pkt *pkt) ++{ ++ // return the rx_data ++ ++ union recv_frame * precv_frame =pkt_to_recvframe(pkt); ++ ++ return precv_frame->u.hdr.rx_data; ++ ++} ++ ++ ++__inline static sint get_recvframe_len(union recv_frame *precvframe) ++{ ++ return precvframe->u.hdr.len; ++} ++ ++__inline static u8 query_rx_pwr_percentage(s8 antpower ) ++{ ++ if ((antpower <= -100) || (antpower >= 20)) ++ { ++ return 0; ++ } ++ else if (antpower >= 0) ++ { ++ return 100; ++ } ++ else ++ { ++ return (100+antpower); ++ } ++} ++ ++__inline static s32 translate_percentage_to_dbm(u32 SignalStrengthIndex) ++{ ++ s32 SignalPower; // in dBm. ++ ++ // Translate to dBm (x=0.5y-95). ++ SignalPower = (s32)((SignalStrengthIndex + 1) >> 1); ++ SignalPower -= 95; ++ ++ return SignalPower; ++} ++ ++ ++struct sta_info; ++ ++extern void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv); ++ ++extern void mgt_dispatcher(_adapter *padapter, union recv_frame *precv_frame); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_rf.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_rf.h +new file mode 100644 +index 000000000000..b8acf930d871 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_rf.h +@@ -0,0 +1,151 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_RF_H_ ++#define __RTW_RF_H_ ++ ++#include ++#include ++ ++#define OFDM_PHY 1 ++#define MIXED_PHY 2 ++#define CCK_PHY 3 ++ ++#define NumRates (13) ++ ++// slot time for 11g ++#define SHORT_SLOT_TIME 9 ++#define NON_SHORT_SLOT_TIME 20 ++ ++#define RTL8711_RF_MAX_SENS 6 ++#define RTL8711_RF_DEF_SENS 4 ++ ++// ++// We now define the following channels as the max channels in each channel plan. ++// 2G, total 14 chnls ++// {1,2,3,4,5,6,7,8,9,10,11,12,13,14} ++// 5G, total 24 chnls ++// {36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165} ++#define MAX_CHANNEL_NUM_2G 14 ++#define MAX_CHANNEL_NUM_5G 24 ++#define MAX_CHANNEL_NUM 38//14+24 ++ ++//#define NUM_REGULATORYS 21 ++#define NUM_REGULATORYS 1 ++ ++//Country codes ++#define USA 0x555320 ++#define EUROPE 0x1 //temp, should be provided later ++#define JAPAN 0x2 //temp, should be provided later ++ ++struct regulatory_class { ++ u32 starting_freq; //MHz, ++ u8 channel_set[MAX_CHANNEL_NUM]; ++ u8 channel_cck_power[MAX_CHANNEL_NUM];//dbm ++ u8 channel_ofdm_power[MAX_CHANNEL_NUM];//dbm ++ u8 txpower_limit; //dbm ++ u8 channel_spacing; //MHz ++ u8 modem; ++}; ++ ++typedef enum _CAPABILITY{ ++ cESS = 0x0001, ++ cIBSS = 0x0002, ++ cPollable = 0x0004, ++ cPollReq = 0x0008, ++ cPrivacy = 0x0010, ++ cShortPreamble = 0x0020, ++ cPBCC = 0x0040, ++ cChannelAgility = 0x0080, ++ cSpectrumMgnt = 0x0100, ++ cQos = 0x0200, // For HCCA, use with CF-Pollable and CF-PollReq ++ cShortSlotTime = 0x0400, ++ cAPSD = 0x0800, ++ cRM = 0x1000, // RRM (Radio Request Measurement) ++ cDSSS_OFDM = 0x2000, ++ cDelayedBA = 0x4000, ++ cImmediateBA = 0x8000, ++}CAPABILITY, *PCAPABILITY; ++ ++enum _REG_PREAMBLE_MODE{ ++ PREAMBLE_LONG = 1, ++ PREAMBLE_AUTO = 2, ++ PREAMBLE_SHORT = 3, ++}; ++ ++ ++enum _RTL8712_RF_MIMO_CONFIG_{ ++ RTL8712_RFCONFIG_1T=0x10, ++ RTL8712_RFCONFIG_2T=0x20, ++ RTL8712_RFCONFIG_1R=0x01, ++ RTL8712_RFCONFIG_2R=0x02, ++ RTL8712_RFCONFIG_1T1R=0x11, ++ RTL8712_RFCONFIG_1T2R=0x12, ++ RTL8712_RFCONFIG_TURBO=0x92, ++ RTL8712_RFCONFIG_2T2R=0x22 ++}; ++ ++ ++// Bandwidth Offset ++#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0 ++#define HAL_PRIME_CHNL_OFFSET_LOWER 1 ++#define HAL_PRIME_CHNL_OFFSET_UPPER 2 ++ ++// Represent Channel Width in HT Capabilities ++// ++typedef enum _HT_CHANNEL_WIDTH { ++ HT_CHANNEL_WIDTH_20 = 0, ++ HT_CHANNEL_WIDTH_40 = 1, ++}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; ++ ++// ++// Represent Extention Channel Offset in HT Capabilities ++// This is available only in 40Mhz mode. ++// ++typedef enum _HT_EXTCHNL_OFFSET{ ++ HT_EXTCHNL_OFFSET_NO_EXT = 0, ++ HT_EXTCHNL_OFFSET_UPPER = 1, ++ HT_EXTCHNL_OFFSET_NO_DEF = 2, ++ HT_EXTCHNL_OFFSET_LOWER = 3, ++}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; ++ ++/* 2007/11/15 MH Define different RF type. */ ++typedef enum _RT_RF_TYPE_DEFINITION ++{ ++ RF_1T2R = 0, ++ RF_2T4R = 1, ++ RF_2T2R = 2, ++ RF_1T1R = 3, ++ RF_2T2R_GREEN = 4, ++ RF_819X_MAX_TYPE = 5, ++}RT_RF_TYPE_DEF_E; ++ ++typedef enum _RF_RADIO_PATH{ ++ RF_PATH_A = 0, //Radio Path A ++ RF_PATH_B = 1, //Radio Path B ++ RF_PATH_C = 2, //Radio Path C ++ RF_PATH_D = 3, //Radio Path D ++ //RF_PATH_MAX //Max RF number 90 support ++}RF_RADIO_PATH_E, *PRF_RADIO_PATH_E; ++ ++u32 rtw_ch2freq(u32 ch); ++u32 rtw_freq2ch(u32 freq); ++ ++ ++#endif //_RTL8711_RF_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_security.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_security.h +new file mode 100644 +index 000000000000..0d99c9a03bf7 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_security.h +@@ -0,0 +1,446 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_SECURITY_H_ ++#define __RTW_SECURITY_H_ ++ ++ ++#include ++#include ++#include ++ ++ ++#define _NO_PRIVACY_ 0x0 ++#define _WEP40_ 0x1 ++#define _TKIP_ 0x2 ++#define _TKIP_WTMIC_ 0x3 ++#define _AES_ 0x4 ++#define _WEP104_ 0x5 ++#ifdef CONFIG_IEEE80211W ++#define _BIP_ 0x8 ++#endif //CONFIG_IEEE80211W ++#define is_wep_enc(alg) (((alg) == _WEP40_) || ((alg) == _WEP104_)) ++ ++#define _WPA_IE_ID_ 0xdd ++#define _WPA2_IE_ID_ 0x30 ++ ++#define SHA256_MAC_LEN 32 ++#define AES_BLOCK_SIZE 16 ++#define AES_PRIV_SIZE (4 * 44) ++ ++#ifndef Ndis802_11AuthModeWPA2 ++#define Ndis802_11AuthModeWPA2 (Ndis802_11AuthModeWPANone + 1) ++#endif ++ ++#ifndef Ndis802_11AuthModeWPA2PSK ++#define Ndis802_11AuthModeWPA2PSK (Ndis802_11AuthModeWPANone + 2) ++#endif ++ ++union pn48 { ++ ++ u64 val; ++ ++#ifdef CONFIG_LITTLE_ENDIAN ++ ++struct { ++ u8 TSC0; ++ u8 TSC1; ++ u8 TSC2; ++ u8 TSC3; ++ u8 TSC4; ++ u8 TSC5; ++ u8 TSC6; ++ u8 TSC7; ++} _byte_; ++ ++#elif defined(CONFIG_BIG_ENDIAN) ++ ++struct { ++ u8 TSC7; ++ u8 TSC6; ++ u8 TSC5; ++ u8 TSC4; ++ u8 TSC3; ++ u8 TSC2; ++ u8 TSC1; ++ u8 TSC0; ++} _byte_; ++ ++#endif ++ ++}; ++ ++union Keytype { ++ u8 skey[16]; ++ u32 lkey[4]; ++}; ++ ++ ++typedef struct _RT_PMKID_LIST ++{ ++ u8 bUsed; ++ u8 Bssid[6]; ++ u8 PMKID[16]; ++ u8 SsidBuf[33]; ++ u8* ssid_octet; ++ u16 ssid_length; ++} RT_PMKID_LIST, *PRT_PMKID_LIST; ++ ++ ++struct security_priv ++{ ++ u32 dot11AuthAlgrthm; // 802.11 auth, could be open, shared, 8021x and authswitch ++ u32 dot11PrivacyAlgrthm; // This specify the privacy for shared auth. algorithm. ++ ++ /* WEP */ ++ u32 dot11PrivacyKeyIndex; // this is only valid for legendary wep, 0~3 for key id. (tx key index) ++ union Keytype dot11DefKey[4]; // this is only valid for def. key ++ u32 dot11DefKeylen[4]; ++ u8 key_mask; /* use to restore wep key after hal_init */ ++ ++ u32 dot118021XGrpPrivacy; // This specify the privacy algthm. used for Grp key ++ u32 dot118021XGrpKeyid; // key id used for Grp Key ( tx key index) ++ union Keytype dot118021XGrpKey[4]; // 802.1x Group Key, for inx0 and inx1 ++ union Keytype dot118021XGrptxmickey[4]; ++ union Keytype dot118021XGrprxmickey[4]; ++ union pn48 dot11Grptxpn; // PN48 used for Grp Key xmit. ++ union pn48 dot11Grprxpn; // PN48 used for Grp Key recv. ++#ifdef CONFIG_IEEE80211W ++ u32 dot11wBIPKeyid; // key id used for BIP Key ( tx key index) ++ union Keytype dot11wBIPKey[6]; // BIP Key, for index4 and index5 ++ union pn48 dot11wBIPtxpn; // PN48 used for Grp Key xmit. ++ union pn48 dot11wBIPrxpn; // PN48 used for Grp Key recv. ++#endif //CONFIG_IEEE80211W ++#ifdef CONFIG_AP_MODE ++ //extend security capabilities for AP_MODE ++ unsigned int dot8021xalg;//0:disable, 1:psk, 2:802.1x ++ unsigned int wpa_psk;//0:disable, bit(0): WPA, bit(1):WPA2 ++ unsigned int wpa_group_cipher; ++ unsigned int wpa2_group_cipher; ++ unsigned int wpa_pairwise_cipher; ++ unsigned int wpa2_pairwise_cipher; ++#endif ++ ++ u8 wps_ie[MAX_WPS_IE_LEN];//added in assoc req ++ int wps_ie_len; ++ ++ ++ u8 binstallGrpkey; ++#ifdef CONFIG_IEEE80211W ++ u8 binstallBIPkey; ++#endif //CONFIG_IEEE80211W ++ u8 busetkipkey; ++ //_timer tkip_timer; ++ u8 bcheck_grpkey; ++ u8 bgrpkey_handshake; ++ ++ //u8 packet_cnt;//unused, removed ++ ++ s32 sw_encrypt;//from registry_priv ++ s32 sw_decrypt;//from registry_priv ++ ++ s32 hw_decrypted;//if the rx packets is hw_decrypted==_FALSE, it means the hw has not been ready. ++ ++ ++ //keeps the auth_type & enc_status from upper layer ioctl(wpa_supplicant or wzc) ++ u32 ndisauthtype; // NDIS_802_11_AUTHENTICATION_MODE ++ u32 ndisencryptstatus; // NDIS_802_11_ENCRYPTION_STATUS ++ ++ WLAN_BSSID_EX sec_bss; //for joinbss (h2c buffer) usage ++ ++ NDIS_802_11_WEP ndiswep; ++#ifdef PLATFORM_WINDOWS ++ u8 KeyMaterial[16];// variable length depending on above field. ++#endif ++ ++ u8 assoc_info[600]; ++ u8 szofcapability[256]; //for wpa2 usage ++ u8 oidassociation[512]; //for wpa/wpa2 usage ++ u8 authenticator_ie[256]; //store ap security information element ++ u8 supplicant_ie[256]; //store sta security information element ++ ++ ++ //for tkip countermeasure ++ u32 last_mic_err_time; ++ u8 btkip_countermeasure; ++ u8 btkip_wait_report; ++ u32 btkip_countermeasure_time; ++ ++ //--------------------------------------------------------------------------- ++ // For WPA2 Pre-Authentication. ++ //--------------------------------------------------------------------------- ++ //u8 RegEnablePreAuth; // Default value: Pre-Authentication enabled or not, from registry "EnablePreAuth". Added by Annie, 2005-11-01. ++ //u8 EnablePreAuthentication; // Current Value: Pre-Authentication enabled or not. ++ RT_PMKID_LIST PMKIDList[NUM_PMKID_CACHE]; // Renamed from PreAuthKey[NUM_PRE_AUTH_KEY]. Annie, 2006-10-13. ++ u8 PMKIDIndex; ++ //u32 PMKIDCount; // Added by Annie, 2006-10-13. ++ //u8 szCapability[256]; // For WPA2-PSK using zero-config, by Annie, 2005-09-20. ++ ++ u8 bWepDefaultKeyIdxSet; ++}; ++ ++struct sha256_state { ++ u64 length; ++ u32 state[8], curlen; ++ u8 buf[64]; ++}; ++ ++#define GET_ENCRY_ALGO(psecuritypriv, psta, encry_algo, bmcst)\ ++do{\ ++ switch(psecuritypriv->dot11AuthAlgrthm)\ ++ {\ ++ case dot11AuthAlgrthm_Open:\ ++ case dot11AuthAlgrthm_Shared:\ ++ case dot11AuthAlgrthm_Auto:\ ++ encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm;\ ++ break;\ ++ case dot11AuthAlgrthm_8021X:\ ++ if(bmcst)\ ++ encry_algo = (u8)psecuritypriv->dot118021XGrpPrivacy;\ ++ else\ ++ encry_algo =(u8) psta->dot118021XPrivacy;\ ++ break;\ ++ }\ ++}while(0) ++ ++ ++#define SET_ICE_IV_LEN( iv_len, icv_len, encrypt)\ ++do{\ ++ switch(encrypt)\ ++ {\ ++ case _WEP40_:\ ++ case _WEP104_:\ ++ iv_len = 4;\ ++ icv_len = 4;\ ++ break;\ ++ case _TKIP_:\ ++ iv_len = 8;\ ++ icv_len = 4;\ ++ break;\ ++ case _AES_:\ ++ iv_len = 8;\ ++ icv_len = 8;\ ++ break;\ ++ default:\ ++ iv_len = 0;\ ++ icv_len = 0;\ ++ break;\ ++ }\ ++}while(0) ++ ++ ++#define GET_TKIP_PN(iv,dot11txpn)\ ++do{\ ++ dot11txpn._byte_.TSC0=iv[2];\ ++ dot11txpn._byte_.TSC1=iv[0];\ ++ dot11txpn._byte_.TSC2=iv[4];\ ++ dot11txpn._byte_.TSC3=iv[5];\ ++ dot11txpn._byte_.TSC4=iv[6];\ ++ dot11txpn._byte_.TSC5=iv[7];\ ++}while(0) ++ ++ ++#define ROL32( A, n ) ( ((A) << (n)) | ( ((A)>>(32-(n))) & ( (1UL << (n)) - 1 ) ) ) ++#define ROR32( A, n ) ROL32( (A), 32-(n) ) ++ ++struct mic_data ++{ ++ u32 K0, K1; // Key ++ u32 L, R; // Current state ++ u32 M; // Message accumulator (single word) ++ u32 nBytesInM; // # bytes in M ++}; ++ ++extern const u32 Te0[256]; ++extern const u32 Te1[256]; ++extern const u32 Te2[256]; ++extern const u32 Te3[256]; ++extern const u32 Te4[256]; ++extern const u32 Td0[256]; ++extern const u32 Td1[256]; ++extern const u32 Td2[256]; ++extern const u32 Td3[256]; ++extern const u32 Td4[256]; ++extern const u32 rcon[10]; ++extern const u8 Td4s[256]; ++extern const u8 rcons[10]; ++ ++#define RCON(i) (rcons[(i)] << 24) ++ ++static inline u32 rotr(u32 val, int bits) ++{ ++ return (val >> bits) | (val << (32 - bits)); ++} ++ ++#define TE0(i) Te0[((i) >> 24) & 0xff] ++#define TE1(i) rotr(Te0[((i) >> 16) & 0xff], 8) ++#define TE2(i) rotr(Te0[((i) >> 8) & 0xff], 16) ++#define TE3(i) rotr(Te0[(i) & 0xff], 24) ++#define TE41(i) ((Te0[((i) >> 24) & 0xff] << 8) & 0xff000000) ++#define TE42(i) (Te0[((i) >> 16) & 0xff] & 0x00ff0000) ++#define TE43(i) (Te0[((i) >> 8) & 0xff] & 0x0000ff00) ++#define TE44(i) ((Te0[(i) & 0xff] >> 8) & 0x000000ff) ++#define TE421(i) ((Te0[((i) >> 16) & 0xff] << 8) & 0xff000000) ++#define TE432(i) (Te0[((i) >> 8) & 0xff] & 0x00ff0000) ++#define TE443(i) (Te0[(i) & 0xff] & 0x0000ff00) ++#define TE414(i) ((Te0[((i) >> 24) & 0xff] >> 8) & 0x000000ff) ++#define TE4(i) ((Te0[(i)] >> 8) & 0x000000ff) ++ ++#define TD0(i) Td0[((i) >> 24) & 0xff] ++#define TD1(i) rotr(Td0[((i) >> 16) & 0xff], 8) ++#define TD2(i) rotr(Td0[((i) >> 8) & 0xff], 16) ++#define TD3(i) rotr(Td0[(i) & 0xff], 24) ++#define TD41(i) (Td4s[((i) >> 24) & 0xff] << 24) ++#define TD42(i) (Td4s[((i) >> 16) & 0xff] << 16) ++#define TD43(i) (Td4s[((i) >> 8) & 0xff] << 8) ++#define TD44(i) (Td4s[(i) & 0xff]) ++#define TD0_(i) Td0[(i) & 0xff] ++#define TD1_(i) rotr(Td0[(i) & 0xff], 8) ++#define TD2_(i) rotr(Td0[(i) & 0xff], 16) ++#define TD3_(i) rotr(Td0[(i) & 0xff], 24) ++ ++#define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ \ ++ ((u32)(pt)[2] << 8) ^ ((u32)(pt)[3])) ++ ++#define PUTU32(ct, st) { \ ++(ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); \ ++(ct)[2] = (u8)((st) >> 8); (ct)[3] = (u8)(st); } ++ ++#define WPA_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \ ++ (((u32) (a)[2]) << 8) | ((u32) (a)[3])) ++ ++#define WPA_PUT_LE16(a, val) \ ++ do { \ ++ (a)[1] = ((u16) (val)) >> 8; \ ++ (a)[0] = ((u16) (val)) & 0xff; \ ++ } while (0) ++ ++#define WPA_PUT_BE32(a, val) \ ++ do { \ ++ (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \ ++ (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \ ++ (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \ ++ (a)[3] = (u8) (((u32) (val)) & 0xff); \ ++ } while (0) ++ ++#define WPA_PUT_BE64(a, val) \ ++ do { \ ++ (a)[0] = (u8) (((u64) (val)) >> 56); \ ++ (a)[1] = (u8) (((u64) (val)) >> 48); \ ++ (a)[2] = (u8) (((u64) (val)) >> 40); \ ++ (a)[3] = (u8) (((u64) (val)) >> 32); \ ++ (a)[4] = (u8) (((u64) (val)) >> 24); \ ++ (a)[5] = (u8) (((u64) (val)) >> 16); \ ++ (a)[6] = (u8) (((u64) (val)) >> 8); \ ++ (a)[7] = (u8) (((u64) (val)) & 0xff); \ ++ } while (0) ++ ++/* ===== start - public domain SHA256 implementation ===== */ ++ ++/* This is based on SHA256 implementation in LibTomCrypt that was released into ++ * public domain by Tom St Denis. */ ++ ++/* the K array */ ++static const unsigned long K[64] = { ++ 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL, ++ 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, 0xd807aa98UL, 0x12835b01UL, ++ 0x243185beUL, 0x550c7dc3UL, 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, ++ 0xc19bf174UL, 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL, ++ 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, 0x983e5152UL, ++ 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, 0xc6e00bf3UL, 0xd5a79147UL, ++ 0x06ca6351UL, 0x14292967UL, 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, ++ 0x53380d13UL, 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL, ++ 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, 0xd192e819UL, ++ 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, 0x19a4c116UL, 0x1e376c08UL, ++ 0x2748774cUL, 0x34b0bcb5UL, 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, ++ 0x682e6ff3UL, 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL, ++ 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL ++}; ++ ++ ++/* Various logical functions */ ++#define RORc(x, y) \ ++( ((((unsigned long) (x) & 0xFFFFFFFFUL) >> (unsigned long) ((y) & 31)) | \ ++ ((unsigned long) (x) << (unsigned long) (32 - ((y) & 31)))) & 0xFFFFFFFFUL) ++#define Ch(x,y,z) (z ^ (x & (y ^ z))) ++#define Maj(x,y,z) (((x | y) & z) | (x & y)) ++#define S(x, n) RORc((x), (n)) ++#define R(x, n) (((x)&0xFFFFFFFFUL)>>(n)) ++#define Sigma0(x) (S(x, 2) ^ S(x, 13) ^ S(x, 22)) ++#define Sigma1(x) (S(x, 6) ^ S(x, 11) ^ S(x, 25)) ++#define Gamma0(x) (S(x, 7) ^ S(x, 18) ^ R(x, 3)) ++#define Gamma1(x) (S(x, 17) ^ S(x, 19) ^ R(x, 10)) ++#ifndef MIN ++#define MIN(x, y) (((x) < (y)) ? (x) : (y)) ++#endif ++#ifdef CONFIG_IEEE80211W ++int omac1_aes_128(u8 *key, u8 *data, size_t data_len, u8 *mac); ++#endif //CONFIG_IEEE80211W ++void rtw_secmicsetkey(struct mic_data *pmicdata, u8 * key ); ++void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b ); ++void rtw_secmicappend(struct mic_data *pmicdata, u8 * src, u32 nBytes ); ++void rtw_secgetmic(struct mic_data *pmicdata, u8 * dst ); ++ ++void rtw_seccalctkipmic( ++ u8 * key, ++ u8 *header, ++ u8 *data, ++ u32 data_len, ++ u8 *Miccode, ++ u8 priority); ++ ++u32 rtw_aes_encrypt(_adapter *padapter, u8 *pxmitframe); ++u32 rtw_tkip_encrypt(_adapter *padapter, u8 *pxmitframe); ++void rtw_wep_encrypt(_adapter *padapter, u8 *pxmitframe); ++ ++u32 rtw_aes_decrypt(_adapter *padapter, u8 *precvframe); ++u32 rtw_tkip_decrypt(_adapter *padapter, u8 *precvframe); ++void rtw_wep_decrypt(_adapter *padapter, u8 *precvframe); ++#ifdef CONFIG_IEEE80211W ++u32 rtw_BIP_verify(_adapter *padapter, u8 *precvframe); ++#endif //CONFIG_IEEE80211W ++#ifdef CONFIG_TDLS ++void wpa_tdls_generate_tpk(_adapter *padapter, struct sta_info *psta); ++int wpa_tdls_ftie_mic(u8 *kck, u8 trans_seq, ++ u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie, ++ u8 *mic); ++int tdls_verify_mic(u8 *kck, u8 trans_seq, ++ u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie); ++#endif //CONFIG_TDLS ++ ++#ifdef PLATFORM_WINDOWS ++void rtw_use_tkipkey_handler ( ++ IN PVOID SystemSpecific1, ++ IN PVOID FunctionContext, ++ IN PVOID SystemSpecific2, ++ IN PVOID SystemSpecific3 ++ ); ++#endif ++#ifdef PLATFORM_LINUX ++void rtw_use_tkipkey_handler(void* FunctionContext); ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++void rtw_use_tkipkey_handler(void* FunctionContext); ++#endif //PLATFORM_FREEBSD ++ ++void rtw_sec_restore_wep_key(_adapter *adapter); ++u8 rtw_handle_tkip_countermeasure(_adapter* adapter, const char *caller); ++ ++#endif //__RTL871X_SECURITY_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_sreset.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_sreset.h +new file mode 100644 +index 000000000000..f2d5dc721b97 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_sreset.h +@@ -0,0 +1,73 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_SRESET_C_ ++#define _RTW_SRESET_C_ ++ ++#include ++#include ++#include ++ ++enum { ++ SRESET_TGP_NULL = 0, ++ SRESET_TGP_XMIT_STATUS = 1, ++ SRESET_TGP_LINK_STATUS = 2, ++}; ++ ++struct sreset_priv { ++ _mutex silentreset_mutex; ++ u8 silent_reset_inprogress; ++ u8 Wifi_Error_Status; ++ unsigned long last_tx_time; ++ unsigned long last_tx_complete_time; ++ ++ s32 dbg_trigger_point; ++}; ++ ++#ifdef CONFIG_RTL8192C ++#include ++#endif ++#ifdef CONFIG_RTL8192D ++#include ++#endif ++#ifdef CONFIG_RTL8723A ++#include ++#endif ++#ifdef CONFIG_RTL8188E ++#include ++#endif ++ ++#define WIFI_STATUS_SUCCESS 0 ++#define USB_VEN_REQ_CMD_FAIL BIT0 ++#define USB_READ_PORT_FAIL BIT1 ++#define USB_WRITE_PORT_FAIL BIT2 ++#define WIFI_MAC_TXDMA_ERROR BIT3 ++#define WIFI_TX_HANG BIT4 ++#define WIFI_RX_HANG BIT5 ++#define WIFI_IF_NOT_EXIST BIT6 ++ ++void sreset_init_value(_adapter *padapter); ++void sreset_reset_value(_adapter *padapter); ++u8 sreset_get_wifi_status(_adapter *padapter); ++void sreset_set_wifi_error_status(_adapter *padapter, u32 status); ++void sreset_set_trigger_point(_adapter *padapter, s32 tgp); ++bool sreset_inprogress(_adapter *padapter); ++void sreset_reset(_adapter *padapter); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_tdls.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_tdls.h +new file mode 100644 +index 000000000000..cbf996f6e5a5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_tdls.h +@@ -0,0 +1,142 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __RTW_TDLS_H_ ++#define __RTW_TDLS_H_ ++ ++#include ++ ++#ifdef CONFIG_TDLS ++/* TDLS STA state */ ++#define TDLS_STATE_NONE 0x00000000 //default state ++#define TDLS_INITIATOR_STATE 0x10000000 ++#define TDLS_RESPONDER_STATE 0x20000000 ++#define TDLS_LINKED_STATE 0x40000000 ++#define TDLS_CH_SWITCH_ON_STATE 0x01000000 ++#define TDLS_PEER_AT_OFF_STATE 0x02000000 //could send pkt on target ch ++#define TDLS_AT_OFF_CH_STATE 0x04000000 ++#define TDLS_CH_SW_INITIATOR_STATE 0x08000000 //avoiding duplicated or unconditional ch. switch rsp. ++#define TDLS_APSD_CHSW_STATE 0x00100000 //in APSD and want to setup channel switch ++#define TDLS_PEER_SLEEP_STATE 0x00200000 //peer sta is sleeping ++#define TDLS_SW_OFF_STATE 0x00400000 //terminate channel swithcing ++#define TDLS_ALIVE_STATE 0x00010000 //Check if peer sta is alived. ++ ++#define TPK_RESEND_COUNT 301 ++#define CH_SWITCH_TIME 10 ++#define CH_SWITCH_TIMEOUT 30 ++#define TDLS_STAY_TIME 500 ++#define TDLS_SIGNAL_THRESH 0x20 ++#define TDLS_WATCHDOG_PERIOD 10 //Periodically sending tdls discovery request in TDLS_WATCHDOG_PERIOD * 2 sec ++#define TDLS_ALIVE_TIMER_PH1 5000 ++#define TDLS_ALIVE_TIMER_PH2 2000 ++#define TDLS_STAY_TIME 500 ++#define TDLS_HANDSHAKE_TIME 2000 ++#define TDLS_ALIVE_COUNT 3 ++#define TDLS_INI_MACID_ENTRY 6 ++ ++/* TDLS */ ++#define TDLS_MIC_LEN 16 ++#define WPA_NONCE_LEN 32 ++#define TDLS_TIMEOUT_LEN 4 ++ ++struct wpa_tdls_ftie { ++ u8 ie_type; /* FTIE */ ++ u8 ie_len; ++ u8 mic_ctrl[2]; ++ u8 mic[TDLS_MIC_LEN]; ++ u8 Anonce[WPA_NONCE_LEN]; /* Responder Nonce in TDLS */ ++ u8 Snonce[WPA_NONCE_LEN]; /* Initiator Nonce in TDLS */ ++ /* followed by optional elements */ ++} ; ++ ++struct wpa_tdls_lnkid { ++ u8 ie_type; /* Link Identifier IE */ ++ u8 ie_len; ++ u8 bssid[ETH_ALEN]; ++ u8 init_sta[ETH_ALEN]; ++ u8 resp_sta[ETH_ALEN]; ++} ; ++ ++static u8 TDLS_RSNIE[]={ 0x01, 0x00, //version shall be set to 1 ++ 0x00, 0x0f, 0xac, 0x07, //group sipher suite ++ 0x01, 0x00, //pairwise cipher suite count ++ 0x00, 0x0f, 0xac, 0x04, //pairwise cipher suite list; CCMP only ++ 0x01, 0x00, //AKM suite count ++ 0x00, 0x0f, 0xac, 0x07, //TPK Handshake ++ 0x00, 0x02, ++ //PMKID shall not be present ++ }; ++ ++static u8 TDLS_WMMIE[]={0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00}; //Qos info all set zero ++ ++static u8 TDLS_EXT_CAPIE[] = {0x00, 0x00, 0x00, 0x50, 0x20}; //bit(28), bit(30), bit(37) ++ ++// SRC: Supported Regulatory Classes ++static u8 TDLS_SRC[] = { 0x01, 0x01, 0x02, 0x03, 0x04, 0x0c, 0x16, 0x17, 0x18, 0x19, 0x1b, 0x1c, 0x1d, 0x1e, 0x20, 0x21 }; ++ ++void rtw_reset_tdls_info(_adapter* padapter); ++int rtw_init_tdls_info(_adapter* padapter); ++void rtw_free_tdls_info(struct tdls_info *ptdlsinfo); ++void issue_nulldata_to_TDLS_peer_STA(_adapter *padapter, struct sta_info *ptdls_sta, unsigned int power_mode); ++void init_TPK_timer(_adapter *padapter, struct sta_info *psta); ++void init_ch_switch_timer(_adapter *padapter, struct sta_info *psta); ++void init_base_ch_timer(_adapter *padapter, struct sta_info *psta); ++void init_off_ch_timer(_adapter *padapter, struct sta_info *psta); ++void init_tdls_alive_timer(_adapter *padapter, struct sta_info *psta); ++void init_handshake_timer(_adapter *padapter, struct sta_info *psta); ++void free_tdls_sta(_adapter *padapter, struct sta_info *ptdls_sta); ++#ifdef CONFIG_WFD ++void issue_tunneled_probe_req(_adapter *padapter); ++void issue_tunneled_probe_rsp(_adapter *padapter, union recv_frame *precv_frame); ++#endif //CONFIG_WFD ++void issue_tdls_dis_req(_adapter *padapter, u8 *mac_addr); ++void issue_tdls_setup_req(_adapter *padapter, u8 *mac_addr); ++void issue_tdls_setup_rsp(_adapter *padapter, union recv_frame *precv_frame); ++void issue_tdls_setup_cfm(_adapter *padapter, union recv_frame *precv_frame); ++void issue_tdls_dis_rsp(_adapter * padapter, union recv_frame * precv_frame, u8 dialog); ++void issue_tdls_teardown(_adapter *padapter, u8 *mac_addr); ++void issue_tdls_peer_traffic_indication(_adapter *padapter, struct sta_info *psta); ++void issue_tdls_ch_switch_req(_adapter *padapter, u8 *mac_addr); ++void issue_tdls_ch_switch_rsp(_adapter *padapter, u8 *mac_addr); ++sint On_TDLS_Dis_Rsp(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Setup_Req(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Setup_Rsp(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Setup_Cfm(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Dis_Req(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Teardown(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Peer_Traffic_Rsp(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Ch_Switch_Req(_adapter *adapter, union recv_frame *precv_frame); ++sint On_TDLS_Ch_Switch_Rsp(_adapter *adapter, union recv_frame *precv_frame); ++void rtw_build_tdls_setup_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_setup_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_setup_cfm_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_teardown_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_dis_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_dis_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 dialog); ++void rtw_build_tdls_peer_traffic_indication_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_ch_switch_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tdls_ch_switch_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tunneled_probe_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++void rtw_build_tunneled_probe_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe); ++ ++int update_sgi_tdls(_adapter *padapter, struct sta_info *psta); ++u32 update_mask_tdls(_adapter *padapter, struct sta_info *psta); ++#endif //CONFIG_TDLS ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_version.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_version.h +new file mode 100644 +index 000000000000..4fb9dd437109 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_version.h +@@ -0,0 +1 @@ ++#define DRIVERVERSION "v4.0.2_9000.20130911" +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_xmit.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_xmit.h +new file mode 100644 +index 000000000000..11c67c4966f9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_xmit.h +@@ -0,0 +1,753 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _RTW_XMIT_H_ ++#define _RTW_XMIT_H_ ++ ++#include ++#include ++#include ++#ifdef PLATFORM_FREEBSD ++#include ++#endif //PLATFORM_FREEBSD ++ ++#ifdef CONFIG_SDIO_HCI ++//#define MAX_XMITBUF_SZ (30720)// (2048) ++#define MAX_XMITBUF_SZ (12288) ++#define NR_XMITBUFF (16) ++ ++#elif defined (CONFIG_USB_HCI) ++#ifdef CONFIG_USB_TX_AGGREGATION ++ #if defined(CONFIG_PLATFORM_ARM_SUNxI) || defined(CONFIG_PLATFORM_ARM_SUN6I) ++ #define MAX_XMITBUF_SZ (12288) //12k 1536*8 ++ #elif defined (CONFIG_PLATFORM_MSTAR) ++ #define MAX_XMITBUF_SZ 7680 // 7.5k ++ #else ++ #define MAX_XMITBUF_SZ (20480) // 20k ++ #endif ++#else ++#define MAX_XMITBUF_SZ (2048) ++#endif //CONFIG_USB_TX_AGGREGATION ++#ifdef CONFIG_SINGLE_XMIT_BUF ++#define NR_XMITBUFF (1) ++#else ++#define NR_XMITBUFF (4) ++#endif //CONFIG_SINGLE_XMIT_BUF ++ ++#elif defined (CONFIG_PCI_HCI) ++#define MAX_XMITBUF_SZ (1664) ++#define NR_XMITBUFF (128) ++#endif ++ ++#ifdef PLATFORM_OS_CE ++#define XMITBUF_ALIGN_SZ 4 ++#else ++#ifdef CONFIG_PCI_HCI ++#define XMITBUF_ALIGN_SZ 4 ++#else ++#define XMITBUF_ALIGN_SZ 512 ++#endif ++#endif ++ ++// xmit extension buff defination ++#define MAX_XMIT_EXTBUF_SZ (1536) ++#ifdef CONFIG_SINGLE_XMIT_BUF ++#define NR_XMIT_EXTBUFF (1) ++#else ++#define NR_XMIT_EXTBUFF (32) ++#endif //CONFIG_SINGLE_XMIT_BUF ++ ++#define MAX_NUMBLKS (1) ++ ++#define XMIT_VO_QUEUE (0) ++#define XMIT_VI_QUEUE (1) ++#define XMIT_BE_QUEUE (2) ++#define XMIT_BK_QUEUE (3) ++ ++#define VO_QUEUE_INX 0 ++#define VI_QUEUE_INX 1 ++#define BE_QUEUE_INX 2 ++#define BK_QUEUE_INX 3 ++#define BCN_QUEUE_INX 4 ++#define MGT_QUEUE_INX 5 ++#define HIGH_QUEUE_INX 6 ++#define TXCMD_QUEUE_INX 7 ++ ++#define HW_QUEUE_ENTRY 8 ++ ++#ifdef CONFIG_PCI_HCI ++//#define TXDESC_NUM 64 ++#define TXDESC_NUM 128 ++#define TXDESC_NUM_BE_QUEUE 128 ++#endif ++ ++#define WEP_IV(pattrib_iv, dot11txpn, keyidx)\ ++do{\ ++ pattrib_iv[0] = dot11txpn._byte_.TSC0;\ ++ pattrib_iv[1] = dot11txpn._byte_.TSC1;\ ++ pattrib_iv[2] = dot11txpn._byte_.TSC2;\ ++ pattrib_iv[3] = ((keyidx & 0x3)<<6);\ ++ dot11txpn.val = (dot11txpn.val == 0xffffff) ? 0: (dot11txpn.val+1);\ ++}while(0) ++ ++ ++#define TKIP_IV(pattrib_iv, dot11txpn, keyidx)\ ++do{\ ++ pattrib_iv[0] = dot11txpn._byte_.TSC1;\ ++ pattrib_iv[1] = (dot11txpn._byte_.TSC1 | 0x20) & 0x7f;\ ++ pattrib_iv[2] = dot11txpn._byte_.TSC0;\ ++ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\ ++ pattrib_iv[4] = dot11txpn._byte_.TSC2;\ ++ pattrib_iv[5] = dot11txpn._byte_.TSC3;\ ++ pattrib_iv[6] = dot11txpn._byte_.TSC4;\ ++ pattrib_iv[7] = dot11txpn._byte_.TSC5;\ ++ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0: (dot11txpn.val+1);\ ++}while(0) ++ ++#define AES_IV(pattrib_iv, dot11txpn, keyidx)\ ++do{\ ++ pattrib_iv[0] = dot11txpn._byte_.TSC0;\ ++ pattrib_iv[1] = dot11txpn._byte_.TSC1;\ ++ pattrib_iv[2] = 0;\ ++ pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\ ++ pattrib_iv[4] = dot11txpn._byte_.TSC2;\ ++ pattrib_iv[5] = dot11txpn._byte_.TSC3;\ ++ pattrib_iv[6] = dot11txpn._byte_.TSC4;\ ++ pattrib_iv[7] = dot11txpn._byte_.TSC5;\ ++ dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0: (dot11txpn.val+1);\ ++}while(0) ++ ++ ++#define HWXMIT_ENTRY 4 ++ ++#define TXDESC_SIZE 32 ++ ++#ifdef CONFIG_SDIO_HCI ++#define TXDESC_OFFSET TXDESC_SIZE ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#define PACKET_OFFSET_SZ (8) ++#define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ) ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++#define TXDESC_OFFSET 0 ++#define TX_DESC_NEXT_DESC_OFFSET 40 ++#endif ++ ++// ++//defined for TX DESC Operation ++// ++ ++#define MAX_TID (15) ++ ++//OFFSET 0 ++#define OFFSET_SZ 0 ++#define OFFSET_SHT 16 ++#define BMC BIT(24) ++#define LSG BIT(26) ++#define FSG BIT(27) ++#define OWN BIT(31) ++ ++//OFFSET 4 ++#define PKT_OFFSET_SZ 0 ++#define BK BIT(6) ++#define QSEL_SHT 8 ++#define Rate_ID_SHT 16 ++#define NAVUSEHDR BIT(20) ++#define PKT_OFFSET_SHT 26 ++#define HWPC BIT(31) ++ ++//OFFSET 8 ++#define AGG_EN BIT(29) ++ ++//OFFSET 12 ++#define SEQ_SHT 16 ++ ++//OFFSET 16 ++#define QoS BIT(6) ++#define HW_SEQ_EN BIT(7) ++#define USERATE BIT(8) ++#define DISDATAFB BIT(10) ++#define DATA_SHORT BIT(24) ++#define DATA_BW BIT(25) ++ ++//OFFSET 20 ++#define SGI BIT(6) ++ ++struct tx_desc{ ++ ++ //DWORD 0 ++ unsigned int txdw0; ++ ++ unsigned int txdw1; ++ ++ unsigned int txdw2; ++ ++ unsigned int txdw3; ++ ++ unsigned int txdw4; ++ ++ unsigned int txdw5; ++ ++ unsigned int txdw6; ++ ++ unsigned int txdw7; ++#ifdef CONFIG_PCI_HCI ++ unsigned int txdw8; ++ ++ unsigned int txdw9; ++ ++ unsigned int txdw10; ++ ++ unsigned int txdw11; ++ ++ // 2008/05/15 MH Because PCIE HW memory R/W 4K limit. And now, our descriptor ++ // size is 40 bytes. If you use more than 102 descriptor( 103*40>4096), HW will execute ++ // memoryR/W CRC error. And then all DMA fetch will fail. We must decrease descriptor ++ // number or enlarge descriptor size as 64 bytes. ++ unsigned int txdw12; ++ ++ unsigned int txdw13; ++ ++ unsigned int txdw14; ++ ++ unsigned int txdw15; ++#endif ++}; ++ ++ ++union txdesc { ++ struct tx_desc txdesc; ++ unsigned int value[TXDESC_SIZE>>2]; ++}; ++ ++#ifdef CONFIG_PCI_HCI ++#define PCI_MAX_TX_QUEUE_COUNT 8 ++ ++struct rtw_tx_ring { ++ struct tx_desc *desc; ++ dma_addr_t dma; ++ unsigned int idx; ++ unsigned int entries; ++ _queue queue; ++ u32 qlen; ++}; ++#endif ++ ++struct hw_xmit { ++ //_lock xmit_lock; ++ //_list pending; ++ _queue *sta_queue; ++ //struct hw_txqueue *phwtxqueue; ++ //sint txcmdcnt; ++ int accnt; ++}; ++ ++#if 0 ++struct pkt_attrib ++{ ++ u8 type; ++ u8 subtype; ++ u8 bswenc; ++ u8 dhcp_pkt; ++ u16 ether_type; ++ int pktlen; //the original 802.3 pkt raw_data len (not include ether_hdr data) ++ int pkt_hdrlen; //the original 802.3 pkt header len ++ int hdrlen; //the WLAN Header Len ++ int nr_frags; ++ int last_txcmdsz; ++ int encrypt; //when 0 indicate no encrypt. when non-zero, indicate the encrypt algorith ++ u8 iv[8]; ++ int iv_len; ++ u8 icv[8]; ++ int icv_len; ++ int priority; ++ int ack_policy; ++ int mac_id; ++ int vcs_mode; //virtual carrier sense method ++ ++ u8 dst[ETH_ALEN]; ++ u8 src[ETH_ALEN]; ++ u8 ta[ETH_ALEN]; ++ u8 ra[ETH_ALEN]; ++ ++ u8 key_idx; ++ ++ u8 qos_en; ++ u8 ht_en; ++ u8 raid;//rate adpative id ++ u8 bwmode; ++ u8 ch_offset;//PRIME_CHNL_OFFSET ++ u8 sgi;//short GI ++ u8 ampdu_en;//tx ampdu enable ++ u8 mdata;//more data bit ++ u8 eosp; ++ ++ u8 pctrl;//per packet txdesc control enable ++ u8 triggered;//for ap mode handling Power Saving sta ++ ++ u32 qsel; ++ u16 seqnum; ++ ++ struct sta_info * psta; ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ u8 hw_tcp_csum; ++#endif ++}; ++#else ++//reduce size ++struct pkt_attrib ++{ ++ u8 type; ++ u8 subtype; ++ u8 bswenc; ++ u8 dhcp_pkt; ++ u16 ether_type; ++ u16 seqnum; ++ u16 pkt_hdrlen; //the original 802.3 pkt header len ++ u16 hdrlen; //the WLAN Header Len ++ u32 pktlen; //the original 802.3 pkt raw_data len (not include ether_hdr data) ++ u32 last_txcmdsz; ++ u8 nr_frags; ++ u8 encrypt; //when 0 indicate no encrypt. when non-zero, indicate the encrypt algorith ++ u8 iv_len; ++ u8 icv_len; ++ u8 iv[8]; ++ u8 icv[8]; ++ u8 priority; ++ u8 ack_policy; ++ u8 mac_id; ++ u8 vcs_mode; //virtual carrier sense method ++ u8 dst[ETH_ALEN]; ++ u8 src[ETH_ALEN]; ++ u8 ta[ETH_ALEN]; ++ u8 ra[ETH_ALEN]; ++ u8 key_idx; ++ u8 qos_en; ++ u8 ht_en; ++ u8 raid;//rate adpative id ++ u8 bwmode; ++ u8 ch_offset;//PRIME_CHNL_OFFSET ++ u8 sgi;//short GI ++ u8 ampdu_en;//tx ampdu enable ++ u8 mdata;//more data bit ++ u8 pctrl;//per packet txdesc control enable ++ u8 triggered;//for ap mode handling Power Saving sta ++ u8 qsel; ++ u8 eosp; ++ u8 rate; ++ u8 intel_proxim; ++ u8 retry_ctrl; ++ struct sta_info * psta; ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ u8 hw_tcp_csum; ++#endif ++ union Keytype dot11tkiptxmickey; ++ //union Keytype dot11tkiprxmickey; ++ union Keytype dot118021x_UncstKey; ++}; ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++#define ETH_ALEN 6 /* Octets in one ethernet addr */ ++#define ETH_HLEN 14 /* Total octets in header. */ ++#define ETH_P_IP 0x0800 /* Internet Protocol packet */ ++ ++/*struct rtw_ieee80211_hdr { ++ uint16_t frame_control; ++ uint16_t duration_id; ++ u8 addr1[6]; ++ u8 addr2[6]; ++ u8 addr3[6]; ++ uint16_t seq_ctrl; ++ u8 addr4[6]; ++} ;*/ ++#endif //PLATFORM_FREEBSD ++ ++#define WLANHDR_OFFSET 64 ++ ++#define NULL_FRAMETAG (0x0) ++#define DATA_FRAMETAG 0x01 ++#define L2_FRAMETAG 0x02 ++#define MGNT_FRAMETAG 0x03 ++#define AMSDU_FRAMETAG 0x04 ++ ++#define EII_FRAMETAG 0x05 ++#define IEEE8023_FRAMETAG 0x06 ++ ++#define MP_FRAMETAG 0x07 ++ ++#define TXAGG_FRAMETAG 0x08 ++ ++struct submit_ctx{ ++ u32 submit_time; /* */ ++ u32 timeout_ms; /* <0: not synchronous, 0: wait forever, >0: up to ms waiting */ ++ int status; /* status for operation */ ++#ifdef PLATFORM_LINUX ++ struct completion done; ++#endif ++}; ++ ++enum { ++ RTW_SCTX_SUBMITTED = -1, ++ RTW_SCTX_DONE_SUCCESS = 0, ++ RTW_SCTX_DONE_UNKNOWN, ++ RTW_SCTX_DONE_TIMEOUT, ++ RTW_SCTX_DONE_BUF_ALLOC, ++ RTW_SCTX_DONE_BUF_FREE, ++ RTW_SCTX_DONE_WRITE_PORT_ERR, ++ RTW_SCTX_DONE_TX_DESC_NA, ++ RTW_SCTX_DONE_TX_DENY, ++ RTW_SCTX_DONE_CCX_PKT_FAIL, ++ RTW_SCTX_DONE_DRV_STOP, ++ RTW_SCTX_DONE_DEV_REMOVE, ++}; ++ ++ ++void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms); ++int rtw_sctx_wait(struct submit_ctx *sctx); ++void rtw_sctx_done_err(struct submit_ctx **sctx, int status); ++void rtw_sctx_done(struct submit_ctx **sctx); ++ ++struct xmit_buf ++{ ++ _list list; ++ ++ _adapter *padapter; ++ ++ u8 *pallocated_buf; ++ ++ u8 *pbuf; ++ ++ void *priv_data; ++ ++ u16 ext_tag; // 0: Normal xmitbuf, 1: extension xmitbuf. ++ u16 flags; ++ u32 alloc_sz; ++ ++ struct submit_ctx *sctx; ++ ++#ifdef CONFIG_USB_HCI ++ ++ u32 sz[8]; ++ ++#if defined(PLATFORM_OS_XP)||defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD) ++ PURB pxmit_urb[8]; ++ dma_addr_t dma_transfer_addr; /* (in) dma addr for transfer_buffer */ ++#endif ++ ++#ifdef PLATFORM_OS_XP ++ PIRP pxmit_irp[8]; ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ USB_TRANSFER usb_transfer_write_port; ++#endif ++ ++ u8 bpending[8]; ++ ++ sint last[8]; ++ ++#endif ++ ++#ifdef CONFIG_SDIO_HCI ++ u32 len; ++ u8 *phead; ++ u8 *pdata; ++ u8 *ptail; ++ u8 *pend; ++ u32 ff_hwaddr; ++#ifdef PLATFORM_OS_XP ++ PMDL pxmitbuf_mdl; ++ PIRP pxmitbuf_irp; ++ PSDBUS_REQUEST_PACKET pxmitbuf_sdrp; ++#endif ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ u32 len; ++#endif ++ ++#ifdef DBG_XMIT_BUF ++ u8 no; ++#endif ++ ++}; ++ ++struct xmit_frame ++{ ++ _list list; ++ ++ struct pkt_attrib attrib; ++ ++ _pkt *pkt; ++ ++ int frame_tag; ++ ++ _adapter *padapter; ++ ++ u8 *buf_addr; ++ ++ struct xmit_buf *pxmitbuf; ++ ++#ifdef CONFIG_SDIO_HCI ++ u8 pg_num; ++ u8 agg_num; ++#endif ++ ++#ifdef CONFIG_USB_HCI ++#ifdef CONFIG_USB_TX_AGGREGATION ++ u8 agg_num; ++#endif ++ u8 pkt_offset; ++#ifdef CONFIG_RTL8192D ++ u8 EMPktNum; ++ u16 EMPktLen[5];//The max value by HW ++#endif ++#endif ++#ifdef CONFIG_XMIT_ACK ++ u8 ack_report; ++#endif ++ ++ u8 *alloc_addr; /* the actual address this xmitframe allocated */ ++ u8 ext_tag; /* 0:data, 1:mgmt */ ++ ++}; ++ ++struct tx_servq { ++ _list tx_pending; ++ _queue sta_pending; ++ int qcnt; ++}; ++ ++ ++ ++struct sta_xmit_priv ++{ ++ _lock lock; ++ sint option; ++ sint apsd_setting; //When bit mask is on, the associated edca queue supports APSD. ++ ++ ++ //struct tx_servq blk_q[MAX_NUMBLKS]; ++ struct tx_servq be_q; //priority == 0,3 ++ struct tx_servq bk_q; //priority == 1,2 ++ struct tx_servq vi_q; //priority == 4,5 ++ struct tx_servq vo_q; //priority == 6,7 ++ _list legacy_dz; ++ _list apsd; ++ ++ u16 txseq_tid[16]; ++ ++ //uint sta_tx_bytes; ++ //u64 sta_tx_pkts; ++ //uint sta_tx_fail; ++ ++}; ++ ++ ++struct hw_txqueue { ++ volatile sint head; ++ volatile sint tail; ++ volatile sint free_sz; //in units of 64 bytes ++ volatile sint free_cmdsz; ++ volatile sint txsz[8]; ++ uint ff_hwaddr; ++ uint cmd_hwaddr; ++ sint ac_tag; ++}; ++ ++ ++struct xmit_priv { ++ ++ _lock lock; ++ ++ _sema xmit_sema; ++ _sema terminate_xmitthread_sema; ++ ++ //_queue blk_strms[MAX_NUMBLKS]; ++ _queue be_pending; ++ _queue bk_pending; ++ _queue vi_pending; ++ _queue vo_pending; ++ _queue bm_pending; ++ ++ //_queue legacy_dz_queue; ++ //_queue apsd_queue; ++ ++ u8 *pallocated_frame_buf; ++ u8 *pxmit_frame_buf; ++ uint free_xmitframe_cnt; ++ _queue free_xmit_queue; ++ ++ //uint mapping_addr; ++ //uint pkt_sz; ++ ++ u8 *xframe_ext_alloc_addr; ++ u8 *xframe_ext; ++ uint free_xframe_ext_cnt; ++ _queue free_xframe_ext_queue; ++ ++ //struct hw_txqueue be_txqueue; ++ //struct hw_txqueue bk_txqueue; ++ //struct hw_txqueue vi_txqueue; ++ //struct hw_txqueue vo_txqueue; ++ //struct hw_txqueue bmc_txqueue; ++ ++ uint frag_len; ++ ++ _adapter *adapter; ++ ++ u8 vcs_setting; ++ u8 vcs; ++ u8 vcs_type; ++ //u16 rts_thresh; ++ ++ u64 tx_bytes; ++ u64 tx_pkts; ++ u64 tx_drop; ++ u64 last_tx_bytes; ++ u64 last_tx_pkts; ++ ++ struct hw_xmit *hwxmits; ++ u8 hwxmit_entry; ++ ++#ifdef CONFIG_USB_HCI ++ _sema tx_retevt;//all tx return event; ++ u8 txirp_cnt;// ++ ++#ifdef PLATFORM_OS_CE ++ USB_TRANSFER usb_transfer_write_port; ++// USB_TRANSFER usb_transfer_write_mem; ++#endif ++#ifdef PLATFORM_LINUX ++ struct tasklet_struct xmit_tasklet; ++#endif ++#ifdef PLATFORM_FREEBSD ++ struct task xmit_tasklet; ++#endif ++ //per AC pending irp ++ int beq_cnt; ++ int bkq_cnt; ++ int viq_cnt; ++ int voq_cnt; ++ ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++ // Tx ++ struct rtw_tx_ring tx_ring[PCI_MAX_TX_QUEUE_COUNT]; ++ int txringcount[PCI_MAX_TX_QUEUE_COUNT]; ++#ifdef PLATFORM_LINUX ++ struct tasklet_struct xmit_tasklet; ++#endif ++#endif ++ ++ _queue free_xmitbuf_queue; ++ _queue pending_xmitbuf_queue; ++ u8 *pallocated_xmitbuf; ++ u8 *pxmitbuf; ++ uint free_xmitbuf_cnt; ++ ++ _queue free_xmit_extbuf_queue; ++ u8 *pallocated_xmit_extbuf; ++ u8 *pxmit_extbuf; ++ uint free_xmit_extbuf_cnt; ++ ++ u16 nqos_ssn; ++ ++#ifdef CONFIG_XMIT_ACK ++ int ack_tx; ++ _mutex ack_tx_mutex; ++ struct submit_ctx ack_tx_ops; ++#endif ++ _lock lock_sctx; ++}; ++ ++extern struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv); ++extern s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf); ++ ++extern struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv); ++extern s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf); ++ ++void rtw_count_tx_stats(_adapter *padapter, struct xmit_frame *pxmitframe, int sz); ++extern void rtw_update_protection(_adapter *padapter, u8 *ie, uint ie_len); ++extern s32 rtw_make_wlanhdr(_adapter *padapter, u8 *hdr, struct pkt_attrib *pattrib); ++extern s32 rtw_put_snap(u8 *data, u16 h_proto); ++ ++extern struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv); ++struct xmit_frame *rtw_alloc_xmitframe_ext(struct xmit_priv *pxmitpriv); ++struct xmit_frame *rtw_alloc_xmitframe_once(struct xmit_priv *pxmitpriv); ++extern s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv, struct xmit_frame *pxmitframe); ++extern void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv, _queue *pframequeue); ++struct tx_servq *rtw_get_sta_pending(_adapter *padapter, struct sta_info *psta, sint up, u8 *ac); ++extern s32 rtw_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe); ++extern struct xmit_frame* rtw_dequeue_xframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit_i, sint entry); ++ ++extern s32 rtw_xmit_classifier(_adapter *padapter, struct xmit_frame *pxmitframe); ++extern thread_return rtw_xmit_thread(thread_context context); ++extern u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib); ++#define rtw_wlan_pkt_size(f) rtw_calculate_wlan_pkt_size_by_attribue(&f->attrib) ++extern s32 rtw_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe); ++#ifdef CONFIG_IEEE80211W ++extern s32 rtw_mgmt_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe); ++#endif //CONFIG_IEEE80211W ++#ifdef CONFIG_TDLS ++s32 rtw_xmit_tdls_coalesce(_adapter *padapter, struct xmit_frame *pxmitframe, u8 action); ++#endif //CONFIG_TDLS ++s32 _rtw_init_hw_txqueue(struct hw_txqueue* phw_txqueue, u8 ac_tag); ++void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv); ++ ++ ++s32 rtw_txframes_pending(_adapter *padapter); ++s32 rtw_txframes_sta_ac_pending(_adapter *padapter, struct pkt_attrib *pattrib); ++void rtw_init_hwxmits(struct hw_xmit *phwxmit, sint entry); ++ ++ ++s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, _adapter *padapter); ++void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv); ++ ++ ++void rtw_alloc_hwxmits(_adapter *padapter); ++void rtw_free_hwxmits(_adapter *padapter); ++ ++ ++s32 rtw_xmit(_adapter *padapter, _pkt **pkt); ++ ++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS) ++sint xmitframe_enqueue_for_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe); ++void stop_sta_xmit(_adapter *padapter, struct sta_info *psta); ++void wakeup_sta_to_xmit(_adapter *padapter, struct sta_info *psta); ++void xmit_delivery_enabled_frames(_adapter *padapter, struct sta_info *psta); ++#endif ++ ++u8 qos_acm(u8 acm_mask, u8 priority); ++ ++#ifdef CONFIG_XMIT_ACK ++int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms); ++void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status); ++#endif //CONFIG_XMIT_ACK ++ ++ ++//include after declaring struct xmit_buf, in order to avoid warning ++#include ++ ++#endif //_RTL871X_XMIT_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h b/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h +new file mode 100644 +index 000000000000..e7e3dc4472aa +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h +@@ -0,0 +1,431 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __STA_INFO_H_ ++#define __STA_INFO_H_ ++ ++#include ++#include ++#include ++#include ++ ++#define IBSS_START_MAC_ID 2 ++#define NUM_STA 32 ++#define NUM_ACL 16 ++ ++ ++//if mode ==0, then the sta is allowed once the addr is hit. ++//if mode ==1, then the sta is rejected once the addr is non-hit. ++struct rtw_wlan_acl_node { ++ _list list; ++ u8 addr[ETH_ALEN]; ++ u8 valid; ++}; ++ ++//mode=0, disable ++//mode=1, accept unless in deny list ++//mode=2, deny unless in accept list ++struct wlan_acl_pool { ++ int mode; ++ int num; ++ struct rtw_wlan_acl_node aclnode[NUM_ACL]; ++ _queue acl_node_q; ++}; ++ ++typedef struct _RSSI_STA{ ++ s32 UndecoratedSmoothedPWDB; ++ s32 UndecoratedSmoothedCCK; ++ s32 UndecoratedSmoothedOFDM; ++ u64 PacketMap; ++ u8 ValidBit; ++}RSSI_STA, *PRSSI_STA; ++ ++struct stainfo_stats { ++ ++ u64 rx_mgnt_pkts; ++ u64 rx_beacon_pkts; ++ u64 rx_probereq_pkts; ++ u64 rx_probersp_pkts; ++ u64 rx_probersp_bm_pkts; ++ u64 rx_probersp_uo_pkts; ++ u64 rx_ctrl_pkts; ++ u64 rx_data_pkts; ++ ++ u64 last_rx_mgnt_pkts; ++ u64 last_rx_beacon_pkts; ++ u64 last_rx_probereq_pkts; ++ u64 last_rx_probersp_pkts; ++ u64 last_rx_probersp_bm_pkts; ++ u64 last_rx_probersp_uo_pkts; ++ u64 last_rx_ctrl_pkts; ++ u64 last_rx_data_pkts; ++ ++ u64 rx_bytes; ++ u64 rx_drops; ++ ++ u64 tx_pkts; ++ u64 tx_bytes; ++ u64 tx_drops; ++ ++}; ++ ++#ifdef CONFIG_TDLS ++struct TDLS_PeerKey { ++ u8 kck[16]; /* TPK-KCK */ ++ u8 tk[16]; /* TPK-TK; only CCMP will be used */ ++} ; ++#endif //CONFIG_TDLS ++ ++struct sta_info { ++ ++ _lock lock; ++ _list list; //free_sta_queue ++ _list hash_list; //sta_hash ++ //_list asoc_list; //20061114 ++ //_list sleep_list;//sleep_q ++ //_list wakeup_list;//wakeup_q ++ ++ struct sta_xmit_priv sta_xmitpriv; ++ struct sta_recv_priv sta_recvpriv; ++ ++ _queue sleep_q; ++ unsigned int sleepq_len; ++ ++ uint state; ++ uint aid; ++ uint mac_id; ++ uint qos_option; ++ u8 hwaddr[ETH_ALEN]; ++ ++ uint ieee8021x_blocked; //0: allowed, 1:blocked ++ uint dot118021XPrivacy; //aes, tkip... ++ union Keytype dot11tkiptxmickey; ++ union Keytype dot11tkiprxmickey; ++ union Keytype dot118021x_UncstKey; ++ union pn48 dot11txpn; // PN48 used for Unicast xmit. ++#ifdef CONFIG_IEEE80211W ++ union pn48 dot11wtxpn; // PN48 used for Unicast mgmt xmit. ++#endif //CONFIG_IEEE80211W ++ union pn48 dot11rxpn; // PN48 used for Unicast recv. ++ ++ ++ u8 bssrateset[16]; ++ u32 bssratelen; ++ s32 rssi; ++ s32 signal_quality; ++ ++ u8 cts2self; ++ u8 rtsen; ++ ++ u8 raid; ++ u8 init_rate; ++ u32 ra_mask; ++ struct stainfo_stats sta_stats; ++ ++#ifdef CONFIG_TDLS ++ u32 tdls_sta_state; ++ u8 dialog; ++ u8 SNonce[32]; ++ u8 ANonce[32]; ++ u32 TDLS_PeerKey_Lifetime; ++ u16 TPK_count; ++ _timer TPK_timer; ++ struct TDLS_PeerKey tpk; ++ _adapter *padapter; ++ u16 stat_code; ++ u8 off_ch; ++ u16 ch_switch_time; ++ u16 ch_switch_timeout; ++ u8 option; ++ _timer option_timer; ++ _timer base_ch_timer; ++ _timer off_ch_timer; ++ ++ _timer handshake_timer; ++ _timer alive_timer1; ++ _timer alive_timer2; ++ u8 timer_flag; ++ u8 alive_count; ++#endif //CONFIG_TDLS ++ ++ //for A-MPDU TX, ADDBA timeout check ++ _timer addba_retry_timer; ++ ++ //for A-MPDU Rx reordering buffer control ++ struct recv_reorder_ctrl recvreorder_ctrl[16]; ++ ++ //for A-MPDU Tx ++ //unsigned char ampdu_txen_bitmap; ++ u16 BA_starting_seqctrl[16]; ++ ++ ++#ifdef CONFIG_80211N_HT ++ struct ht_priv htpriv; ++#endif ++ ++ //Notes: ++ //STA_Mode: ++ //curr_network(mlme_priv/security_priv/qos/ht) + sta_info: (STA & AP) CAP/INFO ++ //scan_q: AP CAP/INFO ++ ++ //AP_Mode: ++ //curr_network(mlme_priv/security_priv/qos/ht) : AP CAP/INFO ++ //sta_info: (AP & STA) CAP/INFO ++ ++#ifdef CONFIG_AP_MODE ++ ++ _list asoc_list; ++ _list auth_list; ++ ++ unsigned int expire_to; ++ unsigned int auth_seq; ++ unsigned int authalg; ++ unsigned char chg_txt[128]; ++ ++ u16 capability; ++ int flags; ++ ++ int dot8021xalg;//0:disable, 1:psk, 2:802.1x ++ int wpa_psk;//0:disable, bit(0): WPA, bit(1):WPA2 ++ int wpa_group_cipher; ++ int wpa2_group_cipher; ++ int wpa_pairwise_cipher; ++ int wpa2_pairwise_cipher; ++ ++ u8 bpairwise_key_installed; ++ ++#ifdef CONFIG_NATIVEAP_MLME ++ u8 wpa_ie[32]; ++ ++ u8 nonerp_set; ++ u8 no_short_slot_time_set; ++ u8 no_short_preamble_set; ++ u8 no_ht_gf_set; ++ u8 no_ht_set; ++ u8 ht_20mhz_set; ++#endif // CONFIG_NATIVEAP_MLME ++ ++ unsigned int tx_ra_bitmap; ++ u8 qos_info; ++ ++ u8 max_sp_len; ++ u8 uapsd_bk;//BIT(0): Delivery enabled, BIT(1): Trigger enabled ++ u8 uapsd_be; ++ u8 uapsd_vi; ++ u8 uapsd_vo; ++ ++ u8 has_legacy_ac; ++ unsigned int sleepq_ac_len; ++ ++#ifdef CONFIG_P2P ++ //p2p priv data ++ u8 is_p2p_device; ++ u8 p2p_status_code; ++ ++ //p2p client info ++ u8 dev_addr[ETH_ALEN]; ++ //u8 iface_addr[ETH_ALEN];//= hwaddr[ETH_ALEN] ++ u8 dev_cap; ++ u16 config_methods; ++ u8 primary_dev_type[8]; ++ u8 num_of_secdev_type; ++ u8 secdev_types_list[32];// 32/8 == 4; ++ u16 dev_name_len; ++ u8 dev_name[32]; ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_TX_MCAST2UNI ++ u8 under_exist_checking; ++#endif // CONFIG_TX_MCAST2UNI ++ ++ u8 keep_alive_trycnt; ++ ++#endif // CONFIG_AP_MODE ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ u8 *passoc_req; ++ u32 assoc_req_len; ++#endif ++ ++ //for DM ++ RSSI_STA rssi_stat; ++ ++ /* To store the sequence number of received management frame */ ++ u16 RxMgmtFrameSeqNum; ++}; ++ ++#define sta_rx_pkts(sta) \ ++ (sta->sta_stats.rx_mgnt_pkts \ ++ + sta->sta_stats.rx_ctrl_pkts \ ++ + sta->sta_stats.rx_data_pkts) ++ ++#define sta_last_rx_pkts(sta) \ ++ (sta->sta_stats.last_rx_mgnt_pkts \ ++ + sta->sta_stats.last_rx_ctrl_pkts \ ++ + sta->sta_stats.last_rx_data_pkts) ++ ++#define sta_rx_data_pkts(sta) \ ++ (sta->sta_stats.rx_data_pkts) ++ ++#define sta_last_rx_data_pkts(sta) \ ++ (sta->sta_stats.last_rx_data_pkts) ++ ++#define sta_rx_mgnt_pkts(sta) \ ++ (sta->sta_stats.rx_mgnt_pkts) ++ ++#define sta_last_rx_mgnt_pkts(sta) \ ++ (sta->sta_stats.last_rx_mgnt_pkts) ++ ++#define sta_rx_beacon_pkts(sta) \ ++ (sta->sta_stats.rx_beacon_pkts) ++ ++#define sta_last_rx_beacon_pkts(sta) \ ++ (sta->sta_stats.last_rx_beacon_pkts) ++ ++#define sta_rx_probereq_pkts(sta) \ ++ (sta->sta_stats.rx_probereq_pkts) ++ ++#define sta_last_rx_probereq_pkts(sta) \ ++ (sta->sta_stats.last_rx_probereq_pkts) ++ ++#define sta_rx_probersp_pkts(sta) \ ++ (sta->sta_stats.rx_probersp_pkts) ++ ++#define sta_last_rx_probersp_pkts(sta) \ ++ (sta->sta_stats.last_rx_probersp_pkts) ++ ++#define sta_rx_probersp_bm_pkts(sta) \ ++ (sta->sta_stats.rx_probersp_bm_pkts) ++ ++#define sta_last_rx_probersp_bm_pkts(sta) \ ++ (sta->sta_stats.last_rx_probersp_bm_pkts) ++ ++#define sta_rx_probersp_uo_pkts(sta) \ ++ (sta->sta_stats.rx_probersp_uo_pkts) ++ ++#define sta_last_rx_probersp_uo_pkts(sta) \ ++ (sta->sta_stats.last_rx_probersp_uo_pkts) ++ ++#define sta_update_last_rx_pkts(sta) \ ++ do { \ ++ sta->sta_stats.last_rx_mgnt_pkts = sta->sta_stats.rx_mgnt_pkts; \ ++ sta->sta_stats.last_rx_beacon_pkts = sta->sta_stats.rx_beacon_pkts; \ ++ sta->sta_stats.last_rx_probereq_pkts = sta->sta_stats.rx_probereq_pkts; \ ++ sta->sta_stats.last_rx_probersp_pkts = sta->sta_stats.rx_probersp_pkts; \ ++ sta->sta_stats.last_rx_probersp_bm_pkts = sta->sta_stats.rx_probersp_bm_pkts; \ ++ sta->sta_stats.last_rx_probersp_uo_pkts = sta->sta_stats.rx_probersp_uo_pkts; \ ++ sta->sta_stats.last_rx_ctrl_pkts = sta->sta_stats.rx_ctrl_pkts; \ ++ sta->sta_stats.last_rx_data_pkts = sta->sta_stats.rx_data_pkts; \ ++ } while(0) ++ ++#define STA_RX_PKTS_ARG(sta) \ ++ sta->sta_stats.rx_mgnt_pkts \ ++ , sta->sta_stats.rx_ctrl_pkts \ ++ , sta->sta_stats.rx_data_pkts ++ ++#define STA_LAST_RX_PKTS_ARG(sta) \ ++ sta->sta_stats.last_rx_mgnt_pkts \ ++ , sta->sta_stats.last_rx_ctrl_pkts \ ++ , sta->sta_stats.last_rx_data_pkts ++ ++#define STA_RX_PKTS_DIFF_ARG(sta) \ ++ sta->sta_stats.rx_mgnt_pkts - sta->sta_stats.last_rx_mgnt_pkts \ ++ , sta->sta_stats.rx_ctrl_pkts - sta->sta_stats.last_rx_ctrl_pkts \ ++ , sta->sta_stats.rx_data_pkts -sta->sta_stats.last_rx_data_pkts ++ ++#define STA_PKTS_FMT "(m:%llu, c:%llu, d:%llu)" ++ ++struct sta_priv { ++ ++ u8 *pallocated_stainfo_buf; ++ u8 *pstainfo_buf; ++ _queue free_sta_queue; ++ ++ _lock sta_hash_lock; ++ _list sta_hash[NUM_STA]; ++ int asoc_sta_count; ++ _queue sleep_q; ++ _queue wakeup_q; ++ ++ _adapter *padapter; ++ ++ ++#ifdef CONFIG_AP_MODE ++ _list asoc_list; ++ _list auth_list; ++ _lock asoc_list_lock; ++ _lock auth_list_lock; ++ u8 asoc_list_cnt; ++ u8 auth_list_cnt; ++ ++ unsigned int auth_to; //sec, time to expire in authenticating. ++ unsigned int assoc_to; //sec, time to expire before associating. ++ unsigned int expire_to; //sec , time to expire after associated. ++ ++ /* pointers to STA info; based on allocated AID or NULL if AID free ++ * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1 ++ * and so on ++ */ ++ struct sta_info *sta_aid[NUM_STA]; ++ ++ u16 sta_dz_bitmap;//only support 15 stations, staion aid bitmap for sleeping sta. ++ u16 tim_bitmap;//only support 15 stations, aid=0~15 mapping bit0~bit15 ++ ++ u16 max_num_sta; ++ ++ struct wlan_acl_pool acl_list; ++#endif ++ ++}; ++ ++ ++__inline static u32 wifi_mac_hash(u8 *mac) ++{ ++ u32 x; ++ ++ x = mac[0]; ++ x = (x << 2) ^ mac[1]; ++ x = (x << 2) ^ mac[2]; ++ x = (x << 2) ^ mac[3]; ++ x = (x << 2) ^ mac[4]; ++ x = (x << 2) ^ mac[5]; ++ ++ x ^= x >> 8; ++ x = x & (NUM_STA - 1); ++ ++ return x; ++} ++ ++ ++extern u32 _rtw_init_sta_priv(struct sta_priv *pstapriv); ++extern u32 _rtw_free_sta_priv(struct sta_priv *pstapriv); ++ ++#define stainfo_offset_valid(offset) (offset < NUM_STA && offset >= 0) ++int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta); ++struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int offset); ++ ++extern struct sta_info *rtw_alloc_stainfo(struct sta_priv *pstapriv, u8 *hwaddr); ++extern u32 rtw_free_stainfo(_adapter *padapter , struct sta_info *psta); ++extern void rtw_free_all_stainfo(_adapter *padapter); ++extern struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr); ++extern u32 rtw_init_bcmc_stainfo(_adapter* padapter); ++extern struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter); ++extern u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr); ++ ++#endif //_STA_INFO_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/usb_hal.h b/drivers/net/wireless/realtek/rtl8192cu/include/usb_hal.h +new file mode 100644 +index 000000000000..ff29ea887aaf +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/usb_hal.h +@@ -0,0 +1,36 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __USB_HAL_H__ ++#define __USB_HAL_H__ ++ ++ ++void rtl8192cu_set_hal_ops(_adapter * padapter); ++ ++void rtl8192du_set_hal_ops(_adapter * padapter); ++#ifdef CONFIG_INTEL_PROXIM ++extern _adapter *rtw_usb_get_sw_pointer(void); ++#endif //CONFIG_INTEL_PROXIM ++#ifdef CONFIG_WOWLAN ++#ifdef CONFIG_WOWLAN_MANUAL ++extern int rtw_suspend_toshiba(PADAPTER Adapter); ++extern int rtw_resume_toshiba(PADAPTER Adapter); ++#endif // CONFIG_WOWLAN_MANUAL ++#endif //CONFIG_WOWLAN ++#endif //__USB_HAL_H__ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops.h b/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops.h +new file mode 100644 +index 000000000000..3160fc9647e8 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops.h +@@ -0,0 +1,109 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __USB_OPS_H_ ++#define __USB_OPS_H_ ++ ++#include ++#include ++#include ++#include ++ ++#define REALTEK_USB_VENQT_READ 0xC0 ++#define REALTEK_USB_VENQT_WRITE 0x40 ++#define REALTEK_USB_VENQT_CMD_REQ 0x05 ++#define REALTEK_USB_VENQT_CMD_IDX 0x00 ++ ++enum{ ++ VENDOR_WRITE = 0x00, ++ VENDOR_READ = 0x01, ++}; ++#define ALIGNMENT_UNIT 16 ++#define MAX_VENDOR_REQ_CMD_SIZE 254 //8188cu SIE Support ++#define MAX_USB_IO_CTL_SIZE (MAX_VENDOR_REQ_CMD_SIZE +ALIGNMENT_UNIT) ++ ++#ifdef PLATFORM_LINUX ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) ++#define rtw_usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout_ms) \ ++ usb_control_msg((dev), (pipe), (request), (requesttype), (value), (index), (data), (size), (timeout_ms)) ++#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \ ++ usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), (timeout_ms)) ++#else ++#define rtw_usb_control_msg(dev, pipe, request, requesttype, value, index, data, size,timeout_ms) \ ++ usb_control_msg((dev), (pipe), (request), (requesttype), (value), (index), (data), (size), \ ++ ((timeout_ms) == 0) ||((timeout_ms)*HZ/1000>0)?((timeout_ms)*HZ/1000):1) ++#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \ ++ usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), \ ++ ((timeout_ms) == 0) ||((timeout_ms)*HZ/1000>0)?((timeout_ms)*HZ/1000):1) ++#endif ++#include ++#endif //PLATFORM_LINUX ++ ++#ifdef CONFIG_RTL8192C ++void rtl8192cu_set_intf_ops(struct _io_ops *pops); ++#define usb_set_intf_ops rtl8192cu_set_intf_ops ++ ++void rtl8192cu_recv_tasklet(void *priv); ++ ++void rtl8192cu_xmit_tasklet(void *priv); ++#endif ++ ++#ifdef CONFIG_RTL8192D ++void rtl8192du_set_intf_ops(struct _io_ops *pops); ++#define usb_set_intf_ops rtl8192du_set_intf_ops ++ ++#ifndef PLATFORM_FREEBSD ++void rtl8192du_recv_tasklet(void *priv); ++#else // PLATFORM_FREEBSD ++void rtl8192du_recv_tasklet(void *priv, int npending); ++#ifdef CONFIG_RX_INDICATE_QUEUE ++void rtw_rx_indicate_tasklet(void *priv, int npending); ++#endif // CONFIG_RX_INDICATE_QUEUE ++#endif // PLATFORM_FREEBSD ++ ++void rtl8192du_xmit_tasklet(void *priv); ++#endif ++ ++/* ++* Increase and check if the continual_urb_error of this @param dvobjprive is larger than MAX_CONTINUAL_URB_ERR ++* @return _TRUE: ++* @return _FALSE: ++*/ ++static inline int rtw_inc_and_chk_continual_urb_error(struct dvobj_priv *dvobj) ++{ ++ int ret = _FALSE; ++ int value; ++ if( (value=ATOMIC_INC_RETURN(&dvobj->continual_urb_error)) > MAX_CONTINUAL_URB_ERR) { ++ DBG_871X("[dvobj:%p][ERROR] continual_urb_error:%d > %d\n", dvobj, value, MAX_CONTINUAL_URB_ERR); ++ ret = _TRUE; ++ } else { ++ //DBG_871X("[dvobj:%p] continual_urb_error:%d\n", dvobj, value); ++ } ++ return ret; ++} ++ ++/* ++* Set the continual_urb_error of this @param dvobjprive to 0 ++*/ ++static inline void rtw_reset_continual_urb_error(struct dvobj_priv *dvobj) ++{ ++ ATOMIC_SET(&dvobj->continual_urb_error, 0); ++} ++ ++#endif //__USB_OPS_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops_linux.h b/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops_linux.h +new file mode 100644 +index 000000000000..d3a55073664b +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/usb_ops_linux.h +@@ -0,0 +1,62 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __USB_OPS_LINUX_H__ ++#define __USB_OPS_LINUX_H__ ++ ++#define VENDOR_CMD_MAX_DATA_LEN 254 ++ ++#define RTW_USB_CONTROL_MSG_TIMEOUT_TEST 10//ms ++#define RTW_USB_CONTROL_MSG_TIMEOUT 500//ms ++ ++#if defined(CONFIG_VENDOR_REQ_RETRY) && defined(CONFIG_USB_VENDOR_REQ_MUTEX) ++/* vendor req retry should be in the situation when each vendor req is atomically submitted from others */ ++#define MAX_USBCTRL_VENDORREQ_TIMES 10 ++#else ++#define MAX_USBCTRL_VENDORREQ_TIMES 1 ++#endif ++ ++#define RTW_USB_BULKOUT_TIMEOUT 5000//ms ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) || (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) ++#define _usbctrl_vendorreq_async_callback(urb, regs) _usbctrl_vendorreq_async_callback(urb) ++#define usb_bulkout_zero_complete(purb, regs) usb_bulkout_zero_complete(purb) ++#define usb_write_mem_complete(purb, regs) usb_write_mem_complete(purb) ++#define usb_write_port_complete(purb, regs) usb_write_port_complete(purb) ++#define usb_read_port_complete(purb, regs) usb_read_port_complete(purb) ++#define usb_read_interrupt_complete(purb, regs) usb_read_interrupt_complete(purb) ++#endif ++ ++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ ++int usb_async_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val); ++int usb_async_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val); ++int usb_async_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val); ++#endif /* CONFIG_USB_SUPPORT_ASYNC_VDN_REQ */ ++ ++unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr); ++ ++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem); ++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem); ++ ++void usb_read_port_cancel(struct intf_hdl *pintfhdl); ++ ++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem); ++void usb_write_port_cancel(struct intf_hdl *pintfhdl); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/usb_osintf.h b/drivers/net/wireless/realtek/rtl8192cu/include/usb_osintf.h +new file mode 100644 +index 000000000000..6003ebb554ee +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/usb_osintf.h +@@ -0,0 +1,37 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __USB_OSINTF_H ++#define __USB_OSINTF_H ++ ++#include ++#include ++#include ++#include ++ ++#define USBD_HALTED(Status) ((ULONG)(Status) >> 30 == 3) ++ ++ ++//uint usb_dvobj_init(_adapter * adapter); ++//void usb_dvobj_deinit(_adapter * adapter); ++ ++u8 usbvendorrequest(struct dvobj_priv *pdvobjpriv, RT_USB_BREQUEST brequest, RT_USB_WVALUE wvalue, u8 windex, void* data, u8 datalen, u8 isdirectionin); ++ ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/usb_vendor_req.h b/drivers/net/wireless/realtek/rtl8192cu/include/usb_vendor_req.h +new file mode 100644 +index 000000000000..0f67122fded6 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/usb_vendor_req.h +@@ -0,0 +1,59 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _USB_VENDOR_REQUEST_H_ ++#define _USB_VENDOR_REQUEST_H_ ++ ++//4 Set/Get Register related wIndex/Data ++#define RT_USB_RESET_MASK_OFF 0 ++#define RT_USB_RESET_MASK_ON 1 ++#define RT_USB_SLEEP_MASK_OFF 0 ++#define RT_USB_SLEEP_MASK_ON 1 ++#define RT_USB_LDO_ON 1 ++#define RT_USB_LDO_OFF 0 ++ ++//4 Set/Get SYSCLK related wValue or Data ++#define RT_USB_SYSCLK_32KHZ 0 ++#define RT_USB_SYSCLK_40MHZ 1 ++#define RT_USB_SYSCLK_60MHZ 2 ++ ++ ++typedef enum _RT_USB_BREQUEST { ++ RT_USB_SET_REGISTER = 1, ++ RT_USB_SET_SYSCLK = 2, ++ RT_USB_GET_SYSCLK = 3, ++ RT_USB_GET_REGISTER = 4 ++} RT_USB_BREQUEST; ++ ++ ++typedef enum _RT_USB_WVALUE { ++ RT_USB_RESET_MASK = 1, ++ RT_USB_SLEEP_MASK = 2, ++ RT_USB_USB_HRCPWM = 3, ++ RT_USB_LDO = 4, ++ RT_USB_BOOT_TYPE = 5 ++} RT_USB_WVALUE; ++ ++ ++//BOOLEAN usbvendorrequest(PCE_USB_DEVICE CEdevice, RT_USB_BREQUEST bRequest, RT_USB_WVALUE wValue, UCHAR wIndex, PVOID Data, UCHAR DataLength, BOOLEAN isDirectionIn); ++//BOOLEAN CEusbGetStatusRequest(PCE_USB_DEVICE CEdevice, IN USHORT Op, IN USHORT Index, PVOID Data); ++//BOOLEAN CEusbFeatureRequest(PCE_USB_DEVICE CEdevice, IN USHORT Op, IN USHORT FeatureSelector, IN USHORT Index); ++//BOOLEAN CEusbGetDescriptorRequest(PCE_USB_DEVICE CEdevice, IN short urbLength, IN UCHAR DescriptorType, IN UCHAR Index, IN USHORT LanguageId, IN PVOID TransferBuffer, IN ULONG TransferBufferLength); ++ ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h b/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h +new file mode 100644 +index 000000000000..1ff400a6e212 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h +@@ -0,0 +1,1245 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef _WIFI_H_ ++#define _WIFI_H_ ++ ++#include ++ ++#ifdef BIT ++//#error "BIT define occurred earlier elsewhere!\n" ++#undef BIT ++#endif ++#define BIT(x) (1 << (x)) ++ ++ ++#define WLAN_ETHHDR_LEN 14 ++#define WLAN_ETHADDR_LEN 6 ++#define WLAN_IEEE_OUI_LEN 3 ++#define WLAN_ADDR_LEN 6 ++#define WLAN_CRC_LEN 4 ++#define WLAN_BSSID_LEN 6 ++#define WLAN_BSS_TS_LEN 8 ++#define WLAN_HDR_A3_LEN 24 ++#define WLAN_HDR_A4_LEN 30 ++#define WLAN_HDR_A3_QOS_LEN 26 ++#define WLAN_HDR_A4_QOS_LEN 32 ++#define WLAN_SSID_MAXLEN 32 ++#define WLAN_DATA_MAXLEN 2312 ++ ++#define WLAN_A3_PN_OFFSET 24 ++#define WLAN_A4_PN_OFFSET 30 ++ ++#define WLAN_MIN_ETHFRM_LEN 60 ++#define WLAN_MAX_ETHFRM_LEN 1514 ++#define WLAN_ETHHDR_LEN 14 ++ ++#define P80211CAPTURE_VERSION 0x80211001 ++ ++#ifdef GREEN_HILL ++#pragma pack(1) ++#endif ++ ++enum WIFI_FRAME_TYPE { ++ WIFI_MGT_TYPE = (0), ++ WIFI_CTRL_TYPE = (BIT(2)), ++ WIFI_DATA_TYPE = (BIT(3)), ++ WIFI_QOS_DATA_TYPE = (BIT(7)|BIT(3)), //!< QoS Data ++}; ++ ++enum WIFI_FRAME_SUBTYPE { ++ ++ // below is for mgt frame ++ WIFI_ASSOCREQ = (0 | WIFI_MGT_TYPE), ++ WIFI_ASSOCRSP = (BIT(4) | WIFI_MGT_TYPE), ++ WIFI_REASSOCREQ = (BIT(5) | WIFI_MGT_TYPE), ++ WIFI_REASSOCRSP = (BIT(5) | BIT(4) | WIFI_MGT_TYPE), ++ WIFI_PROBEREQ = (BIT(6) | WIFI_MGT_TYPE), ++ WIFI_PROBERSP = (BIT(6) | BIT(4) | WIFI_MGT_TYPE), ++ WIFI_BEACON = (BIT(7) | WIFI_MGT_TYPE), ++ WIFI_ATIM = (BIT(7) | BIT(4) | WIFI_MGT_TYPE), ++ WIFI_DISASSOC = (BIT(7) | BIT(5) | WIFI_MGT_TYPE), ++ WIFI_AUTH = (BIT(7) | BIT(5) | BIT(4) | WIFI_MGT_TYPE), ++ WIFI_DEAUTH = (BIT(7) | BIT(6) | WIFI_MGT_TYPE), ++ WIFI_ACTION = (BIT(7) | BIT(6) | BIT(4) | WIFI_MGT_TYPE), ++ ++ // below is for control frame ++ WIFI_PSPOLL = (BIT(7) | BIT(5) | WIFI_CTRL_TYPE), ++ WIFI_RTS = (BIT(7) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE), ++ WIFI_CTS = (BIT(7) | BIT(6) | WIFI_CTRL_TYPE), ++ WIFI_ACK = (BIT(7) | BIT(6) | BIT(4) | WIFI_CTRL_TYPE), ++ WIFI_CFEND = (BIT(7) | BIT(6) | BIT(5) | WIFI_CTRL_TYPE), ++ WIFI_CFEND_CFACK = (BIT(7) | BIT(6) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE), ++ ++ // below is for data frame ++ WIFI_DATA = (0 | WIFI_DATA_TYPE), ++ WIFI_DATA_CFACK = (BIT(4) | WIFI_DATA_TYPE), ++ WIFI_DATA_CFPOLL = (BIT(5) | WIFI_DATA_TYPE), ++ WIFI_DATA_CFACKPOLL = (BIT(5) | BIT(4) | WIFI_DATA_TYPE), ++ WIFI_DATA_NULL = (BIT(6) | WIFI_DATA_TYPE), ++ WIFI_CF_ACK = (BIT(6) | BIT(4) | WIFI_DATA_TYPE), ++ WIFI_CF_POLL = (BIT(6) | BIT(5) | WIFI_DATA_TYPE), ++ WIFI_CF_ACKPOLL = (BIT(6) | BIT(5) | BIT(4) | WIFI_DATA_TYPE), ++ WIFI_QOS_DATA_NULL = (BIT(6) | WIFI_QOS_DATA_TYPE), ++}; ++ ++enum WIFI_REASON_CODE { ++ _RSON_RESERVED_ = 0, ++ _RSON_UNSPECIFIED_ = 1, ++ _RSON_AUTH_NO_LONGER_VALID_ = 2, ++ _RSON_DEAUTH_STA_LEAVING_ = 3, ++ _RSON_INACTIVITY_ = 4, ++ _RSON_UNABLE_HANDLE_ = 5, ++ _RSON_CLS2_ = 6, ++ _RSON_CLS3_ = 7, ++ _RSON_DISAOC_STA_LEAVING_ = 8, ++ _RSON_ASOC_NOT_AUTH_ = 9, ++ ++ // WPA reason ++ _RSON_INVALID_IE_ = 13, ++ _RSON_MIC_FAILURE_ = 14, ++ _RSON_4WAY_HNDSHK_TIMEOUT_ = 15, ++ _RSON_GROUP_KEY_UPDATE_TIMEOUT_ = 16, ++ _RSON_DIFF_IE_ = 17, ++ _RSON_MLTCST_CIPHER_NOT_VALID_ = 18, ++ _RSON_UNICST_CIPHER_NOT_VALID_ = 19, ++ _RSON_AKMP_NOT_VALID_ = 20, ++ _RSON_UNSUPPORT_RSNE_VER_ = 21, ++ _RSON_INVALID_RSNE_CAP_ = 22, ++ _RSON_IEEE_802DOT1X_AUTH_FAIL_ = 23, ++ ++ //belowing are Realtek definition ++ _RSON_PMK_NOT_AVAILABLE_ = 24, ++ _RSON_TDLS_TEAR_TOOFAR_ = 25, ++ _RSON_TDLS_TEAR_UN_RSN_ = 26, ++}; ++ ++/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22) */ ++#if 0 ++#define WLAN_REASON_UNSPECIFIED 1 ++#define WLAN_REASON_PREV_AUTH_NOT_VALID 2 ++#define WLAN_REASON_DEAUTH_LEAVING 3 ++#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 ++#define WLAN_REASON_DISASSOC_AP_BUSY 5 ++#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 ++#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 ++#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 ++#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 ++#endif ++/* IEEE 802.11h */ ++#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10 ++#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11 ++#if 0 ++/* IEEE 802.11i */ ++#define WLAN_REASON_INVALID_IE 13 ++#define WLAN_REASON_MICHAEL_MIC_FAILURE 14 ++#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15 ++#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16 ++#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17 ++#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18 ++#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19 ++#define WLAN_REASON_AKMP_NOT_VALID 20 ++#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21 ++#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22 ++#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23 ++#define WLAN_REASON_CIPHER_SUITE_REJECTED 24 ++#endif ++ ++enum WIFI_STATUS_CODE { ++ _STATS_SUCCESSFUL_ = 0, ++ _STATS_FAILURE_ = 1, ++ _STATS_CAP_FAIL_ = 10, ++ _STATS_NO_ASOC_ = 11, ++ _STATS_OTHER_ = 12, ++ _STATS_NO_SUPP_ALG_ = 13, ++ _STATS_OUT_OF_AUTH_SEQ_ = 14, ++ _STATS_CHALLENGE_FAIL_ = 15, ++ _STATS_AUTH_TIMEOUT_ = 16, ++ _STATS_UNABLE_HANDLE_STA_ = 17, ++ _STATS_RATE_FAIL_ = 18, ++}; ++ ++/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23) */ ++#if 0 ++#define WLAN_STATUS_SUCCESS 0 ++#define WLAN_STATUS_UNSPECIFIED_FAILURE 1 ++#define WLAN_STATUS_CAPS_UNSUPPORTED 10 ++#define WLAN_STATUS_REASSOC_NO_ASSOC 11 ++#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 ++#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 ++#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 ++#define WLAN_STATUS_CHALLENGE_FAIL 15 ++#define WLAN_STATUS_AUTH_TIMEOUT 16 ++#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 ++#define WLAN_STATUS_ASSOC_DENIED_RATES 18 ++#endif ++//entended ++/* IEEE 802.11b */ ++#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 ++#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 ++#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 ++/* IEEE 802.11h */ ++#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22 ++#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23 ++#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24 ++/* IEEE 802.11g */ ++#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25 ++#define WLAN_STATUS_ASSOC_DENIED_NO_ER_PBCC 26 ++#define WLAN_STATUS_ASSOC_DENIED_NO_DSSS_OFDM 27 ++/* IEEE 802.11w */ ++#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30 ++#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31 ++/* IEEE 802.11i */ ++#define WLAN_STATUS_INVALID_IE 40 ++#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41 ++#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42 ++#define WLAN_STATUS_AKMP_NOT_VALID 43 ++#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44 ++#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45 ++#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46 ++#define WLAN_STATUS_TS_NOT_CREATED 47 ++#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48 ++#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49 ++#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50 ++#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51 ++/* IEEE 802.11r */ ++#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52 ++#define WLAN_STATUS_INVALID_PMKID 53 ++#define WLAN_STATUS_INVALID_MDIE 54 ++#define WLAN_STATUS_INVALID_FTIE 55 ++ ++ ++enum WIFI_REG_DOMAIN { ++ DOMAIN_FCC = 1, ++ DOMAIN_IC = 2, ++ DOMAIN_ETSI = 3, ++ DOMAIN_SPAIN = 4, ++ DOMAIN_FRANCE = 5, ++ DOMAIN_MKK = 6, ++ DOMAIN_ISRAEL = 7, ++ DOMAIN_MKK1 = 8, ++ DOMAIN_MKK2 = 9, ++ DOMAIN_MKK3 = 10, ++ DOMAIN_MAX ++}; ++ ++#define _TO_DS_ BIT(8) ++#define _FROM_DS_ BIT(9) ++#define _MORE_FRAG_ BIT(10) ++#define _RETRY_ BIT(11) ++#define _PWRMGT_ BIT(12) ++#define _MORE_DATA_ BIT(13) ++#define _PRIVACY_ BIT(14) ++#define _ORDER_ BIT(15) ++ ++#define SetToDs(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_TO_DS_); \ ++ } while(0) ++ ++#define GetToDs(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_TO_DS_)) != 0) ++ ++#define ClearToDs(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_TO_DS_)); \ ++ } while(0) ++ ++#define SetFrDs(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_FROM_DS_); \ ++ } while(0) ++ ++#define GetFrDs(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_FROM_DS_)) != 0) ++ ++#define ClearFrDs(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_FROM_DS_)); \ ++ } while(0) ++ ++#define get_tofr_ds(pframe) ((GetToDs(pframe) << 1) | GetFrDs(pframe)) ++ ++ ++#define SetMFrag(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_MORE_FRAG_); \ ++ } while(0) ++ ++#define GetMFrag(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_MORE_FRAG_)) != 0) ++ ++#define ClearMFrag(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_MORE_FRAG_)); \ ++ } while(0) ++ ++#define SetRetry(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_RETRY_); \ ++ } while(0) ++ ++#define GetRetry(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_RETRY_)) != 0) ++ ++#define ClearRetry(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_RETRY_)); \ ++ } while(0) ++ ++#define SetPwrMgt(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_PWRMGT_); \ ++ } while(0) ++ ++#define GetPwrMgt(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_PWRMGT_)) != 0) ++ ++#define ClearPwrMgt(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_PWRMGT_)); \ ++ } while(0) ++ ++#define SetMData(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_MORE_DATA_); \ ++ } while(0) ++ ++#define GetMData(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_MORE_DATA_)) != 0) ++ ++#define ClearMData(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_MORE_DATA_)); \ ++ } while(0) ++ ++#define SetPrivacy(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_PRIVACY_); \ ++ } while(0) ++ ++#define GetPrivacy(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_PRIVACY_)) != 0) ++ ++#define ClearPrivacy(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= (~cpu_to_le16(_PRIVACY_)); \ ++ } while(0) ++ ++ ++#define GetOrder(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0) ++ ++#define GetFrameType(pbuf) (le16_to_cpu(*(unsigned short *)(pbuf)) & (BIT(3) | BIT(2))) ++ ++#define SetFrameType(pbuf,type) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= __constant_cpu_to_le16(~(BIT(3) | BIT(2))); \ ++ *(unsigned short *)(pbuf) |= __constant_cpu_to_le16(type); \ ++ } while(0) ++ ++#define GetFrameSubType(pbuf) (cpu_to_le16(*(unsigned short *)(pbuf)) & (BIT(7) | BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2))) ++ ++#define SetFrameSubType(pbuf,type) \ ++ do { \ ++ *(unsigned short *)(pbuf) &= cpu_to_le16(~(BIT(7) | BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2))); \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(type); \ ++ } while(0) ++ ++#define GetSequence(pbuf) (cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) >> 4) ++ ++#define GetFragNum(pbuf) (cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & 0x0f) ++ ++#define GetTupleCache(pbuf) (cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22))) ++ ++#define SetFragNum(pbuf, num) \ ++ do { \ ++ *(unsigned short *)((SIZE_PTR)(pbuf) + 22) = \ ++ ((*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & le16_to_cpu(~(0x000f))) | \ ++ cpu_to_le16(0x0f & (num)); \ ++ } while(0) ++ ++#define SetSeqNum(pbuf, num) \ ++ do { \ ++ *(unsigned short *)((SIZE_PTR)(pbuf) + 22) = \ ++ ((*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & le16_to_cpu((unsigned short)~0xfff0)) | \ ++ le16_to_cpu((unsigned short)(0xfff0 & (num << 4))); \ ++ } while(0) ++ ++#define SetDuration(pbuf, dur) \ ++ do { \ ++ *(unsigned short *)((SIZE_PTR)(pbuf) + 2) = cpu_to_le16(0xffff & (dur)); \ ++ } while(0) ++ ++ ++#define SetPriority(pbuf, tid) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(tid & 0xf); \ ++ } while(0) ++ ++#define GetPriority(pbuf) ((le16_to_cpu(*(unsigned short *)(pbuf))) & 0xf) ++ ++#define SetEOSP(pbuf, eosp) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16( (eosp & 1) << 4); \ ++ } while(0) ++ ++#define SetAckpolicy(pbuf, ack) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16( (ack & 3) << 5); \ ++ } while(0) ++ ++#define GetAckpolicy(pbuf) (((le16_to_cpu(*(unsigned short *)pbuf)) >> 5) & 0x3) ++ ++#define GetAMsdu(pbuf) (((le16_to_cpu(*(unsigned short *)pbuf)) >> 7) & 0x1) ++ ++#define SetAMsdu(pbuf, amsdu) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16( (amsdu & 1) << 7); \ ++ } while(0) ++ ++#define GetAid(pbuf) (cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 2)) & 0x3fff) ++ ++#define GetTid(pbuf) (cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + (((GetToDs(pbuf)<<1)|GetFrDs(pbuf))==3?30:24))) & 0x000f) ++ ++#define GetAddr1Ptr(pbuf) ((unsigned char *)((SIZE_PTR)(pbuf) + 4)) ++ ++#define GetAddr2Ptr(pbuf) ((unsigned char *)((SIZE_PTR)(pbuf) + 10)) ++ ++#define GetAddr3Ptr(pbuf) ((unsigned char *)((SIZE_PTR)(pbuf) + 16)) ++ ++#define GetAddr4Ptr(pbuf) ((unsigned char *)((SIZE_PTR)(pbuf) + 24)) ++ ++#define MacAddr_isBcst(addr) \ ++( \ ++ ( (addr[0] == 0xff) && (addr[1] == 0xff) && \ ++ (addr[2] == 0xff) && (addr[3] == 0xff) && \ ++ (addr[4] == 0xff) && (addr[5] == 0xff) ) ? _TRUE : _FALSE \ ++) ++ ++__inline static int IS_MCAST(unsigned char *da) ++{ ++ if ((*da) & 0x01) ++ return _TRUE; ++ else ++ return _FALSE; ++} ++ ++ ++__inline static unsigned char * get_da(unsigned char *pframe) ++{ ++ unsigned char *da; ++ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe); ++ ++ switch (to_fr_ds) { ++ case 0x00: // ToDs=0, FromDs=0 ++ da = GetAddr1Ptr(pframe); ++ break; ++ case 0x01: // ToDs=0, FromDs=1 ++ da = GetAddr1Ptr(pframe); ++ break; ++ case 0x02: // ToDs=1, FromDs=0 ++ da = GetAddr3Ptr(pframe); ++ break; ++ default: // ToDs=1, FromDs=1 ++ da = GetAddr3Ptr(pframe); ++ break; ++ } ++ ++ return da; ++} ++ ++ ++__inline static unsigned char * get_sa(unsigned char *pframe) ++{ ++ unsigned char *sa; ++ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe); ++ ++ switch (to_fr_ds) { ++ case 0x00: // ToDs=0, FromDs=0 ++ sa = GetAddr2Ptr(pframe); ++ break; ++ case 0x01: // ToDs=0, FromDs=1 ++ sa = GetAddr3Ptr(pframe); ++ break; ++ case 0x02: // ToDs=1, FromDs=0 ++ sa = GetAddr2Ptr(pframe); ++ break; ++ default: // ToDs=1, FromDs=1 ++ sa = GetAddr4Ptr(pframe); ++ break; ++ } ++ ++ return sa; ++} ++ ++__inline static unsigned char * get_hdr_bssid(unsigned char *pframe) ++{ ++ unsigned char *sa; ++ unsigned int to_fr_ds = (GetToDs(pframe) << 1) | GetFrDs(pframe); ++ ++ switch (to_fr_ds) { ++ case 0x00: // ToDs=0, FromDs=0 ++ sa = GetAddr3Ptr(pframe); ++ break; ++ case 0x01: // ToDs=0, FromDs=1 ++ sa = GetAddr2Ptr(pframe); ++ break; ++ case 0x02: // ToDs=1, FromDs=0 ++ sa = GetAddr1Ptr(pframe); ++ break; ++ case 0x03: // ToDs=1, FromDs=1 ++ sa = GetAddr1Ptr(pframe); ++ break; ++ default: ++ sa =NULL; //??????? ++ break; ++ } ++ ++ return sa; ++} ++ ++ ++__inline static int IsFrameTypeCtrl(unsigned char *pframe) ++{ ++ if(WIFI_CTRL_TYPE == GetFrameType(pframe)) ++ return _TRUE; ++ else ++ return _FALSE; ++} ++/*----------------------------------------------------------------------------- ++ Below is for the security related definition ++------------------------------------------------------------------------------*/ ++#define _RESERVED_FRAME_TYPE_ 0 ++#define _SKB_FRAME_TYPE_ 2 ++#define _PRE_ALLOCMEM_ 1 ++#define _PRE_ALLOCHDR_ 3 ++#define _PRE_ALLOCLLCHDR_ 4 ++#define _PRE_ALLOCICVHDR_ 5 ++#define _PRE_ALLOCMICHDR_ 6 ++ ++#define _SIFSTIME_ ((priv->pmib->dot11BssType.net_work_type&WIRELESS_11A)?16:10) ++#define _ACKCTSLNG_ 14 //14 bytes long, including crclng ++#define _CRCLNG_ 4 ++ ++#define _ASOCREQ_IE_OFFSET_ 4 // excluding wlan_hdr ++#define _ASOCRSP_IE_OFFSET_ 6 ++#define _REASOCREQ_IE_OFFSET_ 10 ++#define _REASOCRSP_IE_OFFSET_ 6 ++#define _PROBEREQ_IE_OFFSET_ 0 ++#define _PROBERSP_IE_OFFSET_ 12 ++#define _AUTH_IE_OFFSET_ 6 ++#define _DEAUTH_IE_OFFSET_ 0 ++#define _BEACON_IE_OFFSET_ 12 ++#define _PUBLIC_ACTION_IE_OFFSET_ 8 ++ ++#define _FIXED_IE_LENGTH_ _BEACON_IE_OFFSET_ ++ ++#define _SSID_IE_ 0 ++#define _SUPPORTEDRATES_IE_ 1 ++#define _DSSET_IE_ 3 ++#define _TIM_IE_ 5 ++#define _IBSS_PARA_IE_ 6 ++#define _COUNTRY_IE_ 7 ++#define _CHLGETXT_IE_ 16 ++#define _POW_CAP_IE_ 33 ++#define _SUPPORTED_CH_IE_ 36 ++#define _CH_SWTICH_ANNOUNCE_ 37 //Secondary Channel Offset ++#define _RSN_IE_2_ 48 ++#define _SSN_IE_1_ 221 ++#define _ERPINFO_IE_ 42 ++#define _EXT_SUPPORTEDRATES_IE_ 50 ++ ++#define _HT_CAPABILITY_IE_ 45 ++#define _FTIE_ 55 ++#define _TIMEOUT_ITVL_IE_ 56 ++#define _SRC_IE_ 59 ++#define _HT_EXTRA_INFO_IE_ 61 ++#define _HT_ADD_INFO_IE_ 61 //_HT_EXTRA_INFO_IE_ ++ ++#define EID_BSSCoexistence 72 // 20/40 BSS Coexistence ++#define EID_BSSIntolerantChlReport 73 ++#define _RIC_Descriptor_IE_ 75 ++ ++#ifdef CONFIG_IEEE80211W ++#define _MME_IE_ 76 //802.11w Management MIC element ++#endif //CONFIG_IEEE80211W ++#define _LINK_ID_IE_ 101 ++#define _CH_SWITCH_TIMING_ 104 ++#define _PTI_BUFFER_STATUS_ 106 ++#define _EXT_CAP_IE_ 127 ++#define _VENDOR_SPECIFIC_IE_ 221 ++ ++#define _RESERVED47_ 47 ++ ++/* --------------------------------------------------------------------------- ++ Below is the fixed elements... ++-----------------------------------------------------------------------------*/ ++#define _AUTH_ALGM_NUM_ 2 ++#define _AUTH_SEQ_NUM_ 2 ++#define _BEACON_ITERVAL_ 2 ++#define _CAPABILITY_ 2 ++#define _CURRENT_APADDR_ 6 ++#define _LISTEN_INTERVAL_ 2 ++#define _RSON_CODE_ 2 ++#define _ASOC_ID_ 2 ++#define _STATUS_CODE_ 2 ++#define _TIMESTAMP_ 8 ++ ++#define AUTH_ODD_TO 0 ++#define AUTH_EVEN_TO 1 ++ ++#define WLAN_ETHCONV_ENCAP 1 ++#define WLAN_ETHCONV_RFC1042 2 ++#define WLAN_ETHCONV_8021h 3 ++ ++#define cap_ESS BIT(0) ++#define cap_IBSS BIT(1) ++#define cap_CFPollable BIT(2) ++#define cap_CFRequest BIT(3) ++#define cap_Privacy BIT(4) ++#define cap_ShortPremble BIT(5) ++#define cap_PBCC BIT(6) ++#define cap_ChAgility BIT(7) ++#define cap_SpecMgmt BIT(8) ++#define cap_QoS BIT(9) ++#define cap_ShortSlot BIT(10) ++ ++/*----------------------------------------------------------------------------- ++ Below is the definition for 802.11i / 802.1x ++------------------------------------------------------------------------------*/ ++#define _IEEE8021X_MGT_ 1 // WPA ++#define _IEEE8021X_PSK_ 2 // WPA with pre-shared key ++ ++/* ++#define _NO_PRIVACY_ 0 ++#define _WEP_40_PRIVACY_ 1 ++#define _TKIP_PRIVACY_ 2 ++#define _WRAP_PRIVACY_ 3 ++#define _CCMP_PRIVACY_ 4 ++#define _WEP_104_PRIVACY_ 5 ++#define _WEP_WPA_MIXED_PRIVACY_ 6 // WEP + WPA ++*/ ++ ++#ifdef CONFIG_IEEE80211W ++#define _MME_IE_LENGTH_ 18 ++#endif //CONFIG_IEEE80211W ++/*----------------------------------------------------------------------------- ++ Below is the definition for WMM ++------------------------------------------------------------------------------*/ ++#define _WMM_IE_Length_ 7 // for WMM STA ++#define _WMM_Para_Element_Length_ 24 ++ ++ ++/*----------------------------------------------------------------------------- ++ Below is the definition for 802.11n ++------------------------------------------------------------------------------*/ ++ ++/* block-ack parameters */ ++#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 ++#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C ++#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0 ++#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 ++#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 ++ ++//#ifdef CONFIG_80211N_HT ++ ++#define SetOrderBit(pbuf) \ ++ do { \ ++ *(unsigned short *)(pbuf) |= cpu_to_le16(_ORDER_); \ ++ } while(0) ++ ++#define GetOrderBit(pbuf) (((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0) ++ ++ ++/** ++ * struct rtw_ieee80211_bar - HT Block Ack Request ++ * ++ * This structure refers to "HT BlockAckReq" as ++ * described in 802.11n draft section 7.2.1.7.1 ++ */ ++ #if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8712FW) ++struct rtw_ieee80211_bar { ++ unsigned short frame_control; ++ unsigned short duration; ++ unsigned char ra[6]; ++ unsigned char ta[6]; ++ unsigned short control; ++ unsigned short start_seq_num; ++} __attribute__((packed)); ++ #endif ++ ++/* 802.11 BAR control masks */ ++#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 ++#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 ++ ++ ++ #if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8712FW) || defined(PLATFORM_FREEBSD) ++ ++ ++ ++ /** ++ * struct rtw_ieee80211_ht_cap - HT capabilities ++ * ++ * This structure refers to "HT capabilities element" as ++ * described in 802.11n draft section 7.3.2.52 ++ */ ++ ++struct rtw_ieee80211_ht_cap { ++ unsigned short cap_info; ++ unsigned char ampdu_params_info; ++ unsigned char supp_mcs_set[16]; ++ unsigned short extended_ht_cap_info; ++ unsigned int tx_BF_cap_info; ++ unsigned char antenna_selection_info; ++} __attribute__ ((packed)); ++ ++/** ++ * struct rtw_ieee80211_ht_cap - HT additional information ++ * ++ * This structure refers to "HT information element" as ++ * described in 802.11n draft section 7.3.2.53 ++ */ ++struct ieee80211_ht_addt_info { ++ unsigned char control_chan; ++ unsigned char ht_param; ++ unsigned short operation_mode; ++ unsigned short stbc_param; ++ unsigned char basic_set[16]; ++} __attribute__ ((packed)); ++ ++ ++struct HT_caps_element ++{ ++ union ++ { ++ struct ++ { ++ unsigned short HT_caps_info; ++ unsigned char AMPDU_para; ++ unsigned char MCS_rate[16]; ++ unsigned short HT_ext_caps; ++ unsigned int Beamforming_caps; ++ unsigned char ASEL_caps; ++ } HT_cap_element; ++ unsigned char HT_cap[26]; ++ }u; ++} __attribute__ ((packed)); ++ ++struct HT_info_element ++{ ++ unsigned char primary_channel; ++ unsigned char infos[5]; ++ unsigned char MCS_rate[16]; ++} __attribute__ ((packed)); ++ ++struct AC_param ++{ ++ unsigned char ACI_AIFSN; ++ unsigned char CW; ++ unsigned short TXOP_limit; ++} __attribute__ ((packed)); ++ ++struct WMM_para_element ++{ ++ unsigned char QoS_info; ++ unsigned char reserved; ++ struct AC_param ac_param[4]; ++} __attribute__ ((packed)); ++ ++struct ADDBA_request ++{ ++ unsigned char dialog_token; ++ unsigned short BA_para_set; ++ unsigned short BA_timeout_value; ++ unsigned short BA_starting_seqctrl; ++} __attribute__ ((packed)); ++ ++ ++ ++#endif ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++#pragma pack(1) ++ ++struct rtw_ieee80211_ht_cap { ++ unsigned short cap_info; ++ unsigned char ampdu_params_info; ++ unsigned char supp_mcs_set[16]; ++ unsigned short extended_ht_cap_info; ++ unsigned int tx_BF_cap_info; ++ unsigned char antenna_selection_info; ++}; ++ ++ ++struct ieee80211_ht_addt_info { ++ unsigned char control_chan; ++ unsigned char ht_param; ++ unsigned short operation_mode; ++ unsigned short stbc_param; ++ unsigned char basic_set[16]; ++}; ++ ++struct HT_caps_element ++{ ++ union ++ { ++ struct ++ { ++ unsigned short HT_caps_info; ++ unsigned char AMPDU_para; ++ unsigned char MCS_rate[16]; ++ unsigned short HT_ext_caps; ++ unsigned int Beamforming_caps; ++ unsigned char ASEL_caps; ++ } HT_cap_element; ++ unsigned char HT_cap[26]; ++ }; ++}; ++ ++struct HT_info_element ++{ ++ unsigned char primary_channel; ++ unsigned char infos[5]; ++ unsigned char MCS_rate[16]; ++}; ++ ++struct AC_param ++{ ++ unsigned char ACI_AIFSN; ++ unsigned char CW; ++ unsigned short TXOP_limit; ++}; ++ ++struct WMM_para_element ++{ ++ unsigned char QoS_info; ++ unsigned char reserved; ++ struct AC_param ac_param[4]; ++}; ++ ++struct ADDBA_request ++{ ++ unsigned char dialog_token; ++ unsigned short BA_para_set; ++ unsigned short BA_timeout_value; ++ unsigned short BA_starting_seqctrl; ++}; ++ ++ ++#pragma pack() ++ ++#endif ++ ++ ++/* 802.11n HT capabilities masks */ ++#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002 ++#define IEEE80211_HT_CAP_SM_PS 0x000C ++#define IEEE80211_HT_CAP_GRN_FLD 0x0010 ++#define IEEE80211_HT_CAP_SGI_20 0x0020 ++#define IEEE80211_HT_CAP_SGI_40 0x0040 ++#define IEEE80211_HT_CAP_TX_STBC 0x0080 ++#define IEEE80211_HT_CAP_RX_STBC 0x0300 ++#define IEEE80211_HT_CAP_DELAY_BA 0x0400 ++#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 ++#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 ++/* 802.11n HT capability AMPDU settings */ ++#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 ++#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C ++/* 802.11n HT capability MSC set */ ++#define IEEE80211_SUPP_MCS_SET_UEQM 4 ++#define IEEE80211_HT_CAP_MAX_STREAMS 4 ++#define IEEE80211_SUPP_MCS_SET_LEN 10 ++/* maximum streams the spec allows */ ++#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01 ++#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02 ++#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C ++#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 ++/* 802.11n HT IE masks */ ++#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 ++#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00 ++#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01 ++#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03 ++#define IEEE80211_HT_IE_CHA_WIDTH 0x04 ++#define IEEE80211_HT_IE_HT_PROTECTION 0x0003 ++#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004 ++#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010 ++ ++/* block-ack parameters */ ++#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 ++#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C ++#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0 ++#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 ++#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 ++ ++/* ++ * A-PMDU buffer sizes ++ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) ++ */ ++#define IEEE80211_MIN_AMPDU_BUF 0x8 ++#define IEEE80211_MAX_AMPDU_BUF 0x40 ++ ++ ++/* Spatial Multiplexing Power Save Modes */ ++#define WLAN_HT_CAP_SM_PS_STATIC 0 ++#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 ++#define WLAN_HT_CAP_SM_PS_INVALID 2 ++#define WLAN_HT_CAP_SM_PS_DISABLED 3 ++ ++ ++#define OP_MODE_PURE 0 ++#define OP_MODE_MAY_BE_LEGACY_STAS 1 ++#define OP_MODE_20MHZ_HT_STA_ASSOCED 2 ++#define OP_MODE_MIXED 3 ++ ++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1)) ++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0)) ++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1)) ++#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH ((u8) BIT(2)) ++#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3)) ++#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY ((u8) BIT(4)) ++#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY ((u8) BIT(5)) ++ ++#define HT_INFO_OPERATION_MODE_OP_MODE_MASK \ ++ ((u16) (0x0001 | 0x0002)) ++#define HT_INFO_OPERATION_MODE_OP_MODE_OFFSET 0 ++#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT ((u8) BIT(2)) ++#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT ((u8) BIT(3)) ++#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT ((u8) BIT(4)) ++ ++#define HT_INFO_STBC_PARAM_DUAL_BEACON ((u16) BIT(6)) ++#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT ((u16) BIT(7)) ++#define HT_INFO_STBC_PARAM_SECONDARY_BCN ((u16) BIT(8)) ++#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED ((u16) BIT(9)) ++#define HT_INFO_STBC_PARAM_PCO_ACTIVE ((u16) BIT(10)) ++#define HT_INFO_STBC_PARAM_PCO_PHASE ((u16) BIT(11)) ++ ++ ++ ++//#endif ++ ++// ===============WPS Section=============== ++// For WPSv1.0 ++#define WPSOUI 0x0050f204 ++// WPS attribute ID ++#define WPS_ATTR_VER1 0x104A ++#define WPS_ATTR_SIMPLE_CONF_STATE 0x1044 ++#define WPS_ATTR_RESP_TYPE 0x103B ++#define WPS_ATTR_UUID_E 0x1047 ++#define WPS_ATTR_MANUFACTURER 0x1021 ++#define WPS_ATTR_MODEL_NAME 0x1023 ++#define WPS_ATTR_MODEL_NUMBER 0x1024 ++#define WPS_ATTR_SERIAL_NUMBER 0x1042 ++#define WPS_ATTR_PRIMARY_DEV_TYPE 0x1054 ++#define WPS_ATTR_SEC_DEV_TYPE_LIST 0x1055 ++#define WPS_ATTR_DEVICE_NAME 0x1011 ++#define WPS_ATTR_CONF_METHOD 0x1008 ++#define WPS_ATTR_RF_BANDS 0x103C ++#define WPS_ATTR_DEVICE_PWID 0x1012 ++#define WPS_ATTR_REQUEST_TYPE 0x103A ++#define WPS_ATTR_ASSOCIATION_STATE 0x1002 ++#define WPS_ATTR_CONFIG_ERROR 0x1009 ++#define WPS_ATTR_VENDOR_EXT 0x1049 ++#define WPS_ATTR_SELECTED_REGISTRAR 0x1041 ++ ++// Value of WPS attribute "WPS_ATTR_DEVICE_NAME ++#define WPS_MAX_DEVICE_NAME_LEN 32 ++ ++// Value of WPS Request Type Attribute ++#define WPS_REQ_TYPE_ENROLLEE_INFO_ONLY 0x00 ++#define WPS_REQ_TYPE_ENROLLEE_OPEN_8021X 0x01 ++#define WPS_REQ_TYPE_REGISTRAR 0x02 ++#define WPS_REQ_TYPE_WLAN_MANAGER_REGISTRAR 0x03 ++ ++// Value of WPS Response Type Attribute ++#define WPS_RESPONSE_TYPE_INFO_ONLY 0x00 ++#define WPS_RESPONSE_TYPE_8021X 0x01 ++#define WPS_RESPONSE_TYPE_REGISTRAR 0x02 ++#define WPS_RESPONSE_TYPE_AP 0x03 ++ ++// Value of WPS WiFi Simple Configuration State Attribute ++#define WPS_WSC_STATE_NOT_CONFIG 0x01 ++#define WPS_WSC_STATE_CONFIG 0x02 ++ ++// Value of WPS Version Attribute ++#define WPS_VERSION_1 0x10 ++ ++// Value of WPS Configuration Method Attribute ++#define WPS_CONFIG_METHOD_FLASH 0x0001 ++#define WPS_CONFIG_METHOD_ETHERNET 0x0002 ++#define WPS_CONFIG_METHOD_LABEL 0x0004 ++#define WPS_CONFIG_METHOD_DISPLAY 0x0008 ++#define WPS_CONFIG_METHOD_E_NFC 0x0010 ++#define WPS_CONFIG_METHOD_I_NFC 0x0020 ++#define WPS_CONFIG_METHOD_NFC 0x0040 ++#define WPS_CONFIG_METHOD_PBC 0x0080 ++#define WPS_CONFIG_METHOD_KEYPAD 0x0100 ++#define WPS_CONFIG_METHOD_VPBC 0x0280 ++#define WPS_CONFIG_METHOD_PPBC 0x0480 ++#define WPS_CONFIG_METHOD_VDISPLAY 0x2008 ++#define WPS_CONFIG_METHOD_PDISPLAY 0x4008 ++ ++// Value of Category ID of WPS Primary Device Type Attribute ++#define WPS_PDT_CID_DISPLAYS 0x0007 ++#define WPS_PDT_CID_MULIT_MEDIA 0x0008 ++#define WPS_PDT_CID_RTK_WIDI WPS_PDT_CID_MULIT_MEDIA ++ ++// Value of Sub Category ID of WPS Primary Device Type Attribute ++#define WPS_PDT_SCID_MEDIA_SERVER 0x0005 ++#define WPS_PDT_SCID_RTK_DMP WPS_PDT_SCID_MEDIA_SERVER ++ ++// Value of Device Password ID ++#define WPS_DPID_PIN 0x0000 ++#define WPS_DPID_USER_SPEC 0x0001 ++#define WPS_DPID_MACHINE_SPEC 0x0002 ++#define WPS_DPID_REKEY 0x0003 ++#define WPS_DPID_PBC 0x0004 ++#define WPS_DPID_REGISTRAR_SPEC 0x0005 ++ ++// Value of WPS RF Bands Attribute ++#define WPS_RF_BANDS_2_4_GHZ 0x01 ++#define WPS_RF_BANDS_5_GHZ 0x02 ++ ++// Value of WPS Association State Attribute ++#define WPS_ASSOC_STATE_NOT_ASSOCIATED 0x00 ++#define WPS_ASSOC_STATE_CONNECTION_SUCCESS 0x01 ++#define WPS_ASSOC_STATE_CONFIGURATION_FAILURE 0x02 ++#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE 0x03 ++#define WPS_ASSOC_STATE_IP_FAILURE 0x04 ++ ++// =====================P2P Section===================== ++// For P2P ++#define P2POUI 0x506F9A09 ++ ++// P2P Attribute ID ++#define P2P_ATTR_STATUS 0x00 ++#define P2P_ATTR_MINOR_REASON_CODE 0x01 ++#define P2P_ATTR_CAPABILITY 0x02 ++#define P2P_ATTR_DEVICE_ID 0x03 ++#define P2P_ATTR_GO_INTENT 0x04 ++#define P2P_ATTR_CONF_TIMEOUT 0x05 ++#define P2P_ATTR_LISTEN_CH 0x06 ++#define P2P_ATTR_GROUP_BSSID 0x07 ++#define P2P_ATTR_EX_LISTEN_TIMING 0x08 ++#define P2P_ATTR_INTENTED_IF_ADDR 0x09 ++#define P2P_ATTR_MANAGEABILITY 0x0A ++#define P2P_ATTR_CH_LIST 0x0B ++#define P2P_ATTR_NOA 0x0C ++#define P2P_ATTR_DEVICE_INFO 0x0D ++#define P2P_ATTR_GROUP_INFO 0x0E ++#define P2P_ATTR_GROUP_ID 0x0F ++#define P2P_ATTR_INTERFACE 0x10 ++#define P2P_ATTR_OPERATING_CH 0x11 ++#define P2P_ATTR_INVITATION_FLAGS 0x12 ++ ++// Value of Status Attribute ++#define P2P_STATUS_SUCCESS 0x00 ++#define P2P_STATUS_FAIL_INFO_UNAVAILABLE 0x01 ++#define P2P_STATUS_FAIL_INCOMPATIBLE_PARAM 0x02 ++#define P2P_STATUS_FAIL_LIMIT_REACHED 0x03 ++#define P2P_STATUS_FAIL_INVALID_PARAM 0x04 ++#define P2P_STATUS_FAIL_REQUEST_UNABLE 0x05 ++#define P2P_STATUS_FAIL_PREVOUS_PROTO_ERR 0x06 ++#define P2P_STATUS_FAIL_NO_COMMON_CH 0x07 ++#define P2P_STATUS_FAIL_UNKNOWN_P2PGROUP 0x08 ++#define P2P_STATUS_FAIL_BOTH_GOINTENT_15 0x09 ++#define P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION 0x0A ++#define P2P_STATUS_FAIL_USER_REJECT 0x0B ++ ++// Value of Inviation Flags Attribute ++#define P2P_INVITATION_FLAGS_PERSISTENT BIT(0) ++ ++#define DMP_P2P_DEVCAP_SUPPORT (P2P_DEVCAP_SERVICE_DISCOVERY | \ ++ P2P_DEVCAP_CLIENT_DISCOVERABILITY | \ ++ P2P_DEVCAP_CONCURRENT_OPERATION | \ ++ P2P_DEVCAP_INVITATION_PROC) ++ ++#define DMP_P2P_GRPCAP_SUPPORT (P2P_GRPCAP_INTRABSS) ++ ++// Value of Device Capability Bitmap ++#define P2P_DEVCAP_SERVICE_DISCOVERY BIT(0) ++#define P2P_DEVCAP_CLIENT_DISCOVERABILITY BIT(1) ++#define P2P_DEVCAP_CONCURRENT_OPERATION BIT(2) ++#define P2P_DEVCAP_INFRA_MANAGED BIT(3) ++#define P2P_DEVCAP_DEVICE_LIMIT BIT(4) ++#define P2P_DEVCAP_INVITATION_PROC BIT(5) ++ ++// Value of Group Capability Bitmap ++#define P2P_GRPCAP_GO BIT(0) ++#define P2P_GRPCAP_PERSISTENT_GROUP BIT(1) ++#define P2P_GRPCAP_GROUP_LIMIT BIT(2) ++#define P2P_GRPCAP_INTRABSS BIT(3) ++#define P2P_GRPCAP_CROSS_CONN BIT(4) ++#define P2P_GRPCAP_PERSISTENT_RECONN BIT(5) ++#define P2P_GRPCAP_GROUP_FORMATION BIT(6) ++ ++// P2P Public Action Frame ( Management Frame ) ++#define P2P_PUB_ACTION_ACTION 0x09 ++ ++// P2P Public Action Frame Type ++#define P2P_GO_NEGO_REQ 0 ++#define P2P_GO_NEGO_RESP 1 ++#define P2P_GO_NEGO_CONF 2 ++#define P2P_INVIT_REQ 3 ++#define P2P_INVIT_RESP 4 ++#define P2P_DEVDISC_REQ 5 ++#define P2P_DEVDISC_RESP 6 ++#define P2P_PROVISION_DISC_REQ 7 ++#define P2P_PROVISION_DISC_RESP 8 ++ ++// P2P Action Frame Type ++#define P2P_NOTICE_OF_ABSENCE 0 ++#define P2P_PRESENCE_REQUEST 1 ++#define P2P_PRESENCE_RESPONSE 2 ++#define P2P_GO_DISC_REQUEST 3 ++ ++ ++#define P2P_MAX_PERSISTENT_GROUP_NUM 10 ++ ++#define P2P_PROVISIONING_SCAN_CNT 3 ++ ++#define P2P_WILDCARD_SSID_LEN 7 ++ ++#define P2P_FINDPHASE_EX_NONE 0 // default value, used when: (1)p2p disabed or (2)p2p enabled but only do 1 scan phase ++#define P2P_FINDPHASE_EX_FULL 1 // used when p2p enabled and want to do 1 scan phase and P2P_FINDPHASE_EX_MAX-1 find phase ++#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1) ++#define P2P_FINDPHASE_EX_MAX 4 ++#define P2P_FINDPHASE_EX_SOCIAL_LAST P2P_FINDPHASE_EX_MAX ++ ++#define P2P_PROVISION_TIMEOUT 5000 // 5 seconds timeout for sending the provision discovery request ++#define P2P_CONCURRENT_PROVISION_TIMEOUT 3000 // 3 seconds timeout for sending the provision discovery request under concurrent mode ++#define P2P_GO_NEGO_TIMEOUT 5000 // 5 seconds timeout for receiving the group negotation response ++#define P2P_CONCURRENT_GO_NEGO_TIMEOUT 3000 // 3 seconds timeout for sending the negotiation request under concurrent mode ++#define P2P_TX_PRESCAN_TIMEOUT 100 // 100ms ++#define P2P_INVITE_TIMEOUT 5000 // 5 seconds timeout for sending the invitation request ++#define P2P_CONCURRENT_INVITE_TIMEOUT 3000 // 3 seconds timeout for sending the invitation request under concurrent mode ++#define P2P_RESET_SCAN_CH 15000 // 15 seconds timeout to reset the scan channel ( based on channel plan ) ++#define P2P_MAX_INTENT 15 ++ ++#define P2P_MAX_NOA_NUM 2 ++ ++// WPS Configuration Method ++#define WPS_CM_NONE 0x0000 ++#define WPS_CM_LABEL 0x0004 ++#define WPS_CM_DISPLYA 0x0008 ++#define WPS_CM_EXTERNAL_NFC_TOKEN 0x0010 ++#define WPS_CM_INTEGRATED_NFC_TOKEN 0x0020 ++#define WPS_CM_NFC_INTERFACE 0x0040 ++#define WPS_CM_PUSH_BUTTON 0x0080 ++#define WPS_CM_KEYPAD 0x0100 ++#define WPS_CM_SW_PUHS_BUTTON 0x0280 ++#define WPS_CM_HW_PUHS_BUTTON 0x0480 ++#define WPS_CM_SW_DISPLAY_PIN 0x2008 ++#define WPS_CM_LCD_DISPLAY_PIN 0x4008 ++ ++enum P2P_ROLE { ++ P2P_ROLE_DISABLE = 0, ++ P2P_ROLE_DEVICE = 1, ++ P2P_ROLE_CLIENT = 2, ++ P2P_ROLE_GO = 3 ++}; ++ ++enum P2P_STATE { ++ P2P_STATE_NONE = 0, // P2P disable ++ P2P_STATE_IDLE = 1, // P2P had enabled and do nothing ++ P2P_STATE_LISTEN = 2, // In pure listen state ++ P2P_STATE_SCAN = 3, // In scan phase ++ P2P_STATE_FIND_PHASE_LISTEN = 4, // In the listen state of find phase ++ P2P_STATE_FIND_PHASE_SEARCH = 5, // In the search state of find phase ++ P2P_STATE_TX_PROVISION_DIS_REQ = 6, // In P2P provisioning discovery ++ P2P_STATE_RX_PROVISION_DIS_RSP = 7, ++ P2P_STATE_RX_PROVISION_DIS_REQ = 8, ++ P2P_STATE_GONEGO_ING = 9, // Doing the group owner negoitation handshake ++ P2P_STATE_GONEGO_OK = 10, // finish the group negoitation handshake with success ++ P2P_STATE_GONEGO_FAIL = 11, // finish the group negoitation handshake with failure ++ P2P_STATE_RECV_INVITE_REQ_MATCH = 12, // receiving the P2P Inviation request and match with the profile. ++ P2P_STATE_PROVISIONING_ING = 13, // Doing the P2P WPS ++ P2P_STATE_PROVISIONING_DONE = 14, // Finish the P2P WPS ++ P2P_STATE_TX_INVITE_REQ = 15, // Transmit the P2P Invitation request ++ P2P_STATE_RX_INVITE_RESP_OK = 16, // Receiving the P2P Invitation response with sucess ++ P2P_STATE_RECV_INVITE_REQ_DISMATCH = 17, // receiving the P2P Inviation request and dismatch with the profile. ++ P2P_STATE_RECV_INVITE_REQ_GO = 18, // receiving the P2P Inviation request and this wifi is GO. ++ P2P_STATE_RECV_INVITE_REQ_JOIN = 19, // receiving the P2P Inviation request to join an existing P2P Group. ++ P2P_STATE_RX_INVITE_RESP_FAIL = 20, // recveing the P2P Inviation response with failure ++ P2P_STATE_RX_INFOR_NOREADY = 21, // receiving p2p negoitation response with information is not available ++ P2P_STATE_TX_INFOR_NOREADY = 22, // sending p2p negoitation response with information is not available ++}; ++ ++enum P2P_WPSINFO { ++ P2P_NO_WPSINFO = 0, ++ P2P_GOT_WPSINFO_PEER_DISPLAY_PIN = 1, ++ P2P_GOT_WPSINFO_SELF_DISPLAY_PIN = 2, ++ P2P_GOT_WPSINFO_PBC = 3, ++}; ++ ++#define P2P_PRIVATE_IOCTL_SET_LEN 64 ++ ++enum P2P_PROTO_WK_ID ++{ ++ P2P_FIND_PHASE_WK = 0, ++ P2P_RESTORE_STATE_WK = 1, ++ P2P_PRE_TX_PROVDISC_PROCESS_WK = 2, ++ P2P_PRE_TX_NEGOREQ_PROCESS_WK = 3, ++ P2P_PRE_TX_INVITEREQ_PROCESS_WK = 4, ++ P2P_AP_P2P_CH_SWITCH_PROCESS_WK =5, ++ P2P_RO_CH_WK = 6, ++}; ++ ++#ifdef CONFIG_P2P_PS ++enum P2P_PS_STATE ++{ ++ P2P_PS_DISABLE = 0, ++ P2P_PS_ENABLE = 1, ++ P2P_PS_SCAN = 2, ++ P2P_PS_SCAN_DONE = 3, ++ P2P_PS_ALLSTASLEEP = 4, // for P2P GO ++}; ++ ++enum P2P_PS_MODE ++{ ++ P2P_PS_NONE = 0, ++ P2P_PS_CTWINDOW = 1, ++ P2P_PS_NOA = 2, ++ P2P_PS_MIX = 3, // CTWindow and NoA ++}; ++#endif // CONFIG_P2P_PS ++ ++// =====================WFD Section===================== ++// For Wi-Fi Display ++#define WFD_ATTR_DEVICE_INFO 0x00 ++#define WFD_ATTR_ASSOC_BSSID 0x01 ++#define WFD_ATTR_COUPLED_SINK_INFO 0x06 ++#define WFD_ATTR_LOCAL_IP_ADDR 0x08 ++#define WFD_ATTR_SESSION_INFO 0x09 ++#define WFD_ATTR_ALTER_MAC 0x0a ++ ++// For WFD Device Information Attribute ++#define WFD_DEVINFO_SOURCE 0x0000 ++#define WFD_DEVINFO_PSINK 0x0001 ++#define WFD_DEVINFO_SSINK 0x0002 ++#define WFD_DEVINFO_DUAL 0x0003 ++ ++#define WFD_DEVINFO_SESSION_AVAIL 0x0010 ++#define WFD_DEVINFO_WSD 0x0040 ++#define WFD_DEVINFO_PC_TDLS 0x0080 ++#define WFD_DEVINFO_HDCP_SUPPORT 0x0100 ++ ++ ++#ifdef CONFIG_TX_MCAST2UNI ++#define IP_MCAST_MAC(mac) ((mac[0]==0x01)&&(mac[1]==0x00)&&(mac[2]==0x5e)) ++#define ICMPV6_MCAST_MAC(mac) ((mac[0]==0x33)&&(mac[1]==0x33)&&(mac[2]!=0xff)) ++#endif // CONFIG_TX_MCAST2UNI ++ ++ ++ ++#endif // _WIFI_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/wlan_bssdef.h b/drivers/net/wireless/realtek/rtl8192cu/include/wlan_bssdef.h +new file mode 100644 +index 000000000000..641b7e9b3d8f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/wlan_bssdef.h +@@ -0,0 +1,702 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __WLAN_BSSDEF_H__ ++#define __WLAN_BSSDEF_H__ ++ ++ ++#define MAX_IE_SZ 768 ++ ++ ++#ifdef PLATFORM_LINUX ++ ++#define NDIS_802_11_LENGTH_SSID 32 ++#define NDIS_802_11_LENGTH_RATES 8 ++#define NDIS_802_11_LENGTH_RATES_EX 16 ++ ++typedef unsigned char NDIS_802_11_MAC_ADDRESS[6]; ++typedef long NDIS_802_11_RSSI; // in dBm ++typedef unsigned char NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; // Set of 8 data rates ++typedef unsigned char NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; // Set of 16 data rates ++ ++ ++typedef ULONG NDIS_802_11_KEY_INDEX; ++typedef unsigned long long NDIS_802_11_KEY_RSC; ++ ++ ++typedef struct _NDIS_802_11_SSID ++{ ++ ULONG SsidLength; ++ UCHAR Ssid[32]; ++} NDIS_802_11_SSID, *PNDIS_802_11_SSID; ++ ++typedef enum _NDIS_802_11_NETWORK_TYPE ++{ ++ Ndis802_11FH, ++ Ndis802_11DS, ++ Ndis802_11OFDM5, ++ Ndis802_11OFDM24, ++ Ndis802_11NetworkTypeMax // not a real type, defined as an upper bound ++} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE; ++ ++typedef struct _NDIS_802_11_CONFIGURATION_FH ++{ ++ ULONG Length; // Length of structure ++ ULONG HopPattern; // As defined by 802.11, MSB set ++ ULONG HopSet; // to one if non-802.11 ++ ULONG DwellTime; // units are Kusec ++} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH; ++ ++ ++/* ++ FW will only save the channel number in DSConfig. ++ ODI Handler will convert the channel number to freq. number. ++*/ ++typedef struct _NDIS_802_11_CONFIGURATION ++{ ++ ULONG Length; // Length of structure ++ ULONG BeaconPeriod; // units are Kusec ++ ULONG ATIMWindow; // units are Kusec ++ ULONG DSConfig; // Frequency, units are kHz ++ NDIS_802_11_CONFIGURATION_FH FHConfig; ++} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION; ++ ++ ++ ++typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE ++{ ++ Ndis802_11IBSS, ++ Ndis802_11Infrastructure, ++ Ndis802_11AutoUnknown, ++ Ndis802_11InfrastructureMax, // Not a real value, defined as upper bound ++ Ndis802_11APMode ++} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE; ++ ++ ++ ++ ++ ++typedef struct _NDIS_802_11_FIXED_IEs ++{ ++ UCHAR Timestamp[8]; ++ USHORT BeaconInterval; ++ USHORT Capabilities; ++} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs; ++ ++ ++ ++typedef struct _NDIS_802_11_VARIABLE_IEs ++{ ++ UCHAR ElementID; ++ UCHAR Length; ++ UCHAR data[1]; ++} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs; ++ ++ ++ ++/* ++ ++ ++ ++Length is the 4 bytes multiples of the sume of ++ sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + sizeof (NDIS_802_11_SSID) + sizeof (ULONG) +++ sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + sizeof (NDIS_802_11_CONFIGURATION) +++ sizeof (NDIS_802_11_RATES_EX) + IELength ++ ++Except the IELength, all other fields are fixed length. Therefore, we can define a marco to present the ++partial sum. ++ ++*/ ++#if 0 ++typedef struct _NDIS_WLAN_BSSID_EX ++{ ++ ULONG Length; ++ NDIS_802_11_MAC_ADDRESS MacAddress; ++ UCHAR Reserved[2];//[0]: IS beacon frame, [1]:optimum_antenna=>For antenna diversity; ++ NDIS_802_11_SSID Ssid; ++ ULONG Privacy; ++ NDIS_802_11_RSSI Rssi; ++ NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; ++ NDIS_802_11_CONFIGURATION Configuration; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; ++ NDIS_802_11_RATES_EX SupportedRates; ++ ULONG IELength; ++ UCHAR IEs[MAX_IE_SZ]; //(timestamp, beacon interval, and capability information) ++} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX; ++ ++ ++typedef struct _NDIS_802_11_BSSID_LIST_EX ++{ ++ ULONG NumberOfItems; ++ NDIS_WLAN_BSSID_EX Bssid[1]; ++} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX; ++#endif ++ ++typedef enum _NDIS_802_11_AUTHENTICATION_MODE ++{ ++ Ndis802_11AuthModeOpen, ++ Ndis802_11AuthModeShared, ++ Ndis802_11AuthModeAutoSwitch, ++ Ndis802_11AuthModeWPA, ++ Ndis802_11AuthModeWPAPSK, ++ Ndis802_11AuthModeWPANone, ++ Ndis802_11AuthModeMax // Not a real mode, defined as upper bound ++} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE; ++ ++typedef enum _NDIS_802_11_WEP_STATUS ++{ ++ Ndis802_11WEPEnabled, ++ Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled, ++ Ndis802_11WEPDisabled, ++ Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled, ++ Ndis802_11WEPKeyAbsent, ++ Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent, ++ Ndis802_11WEPNotSupported, ++ Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported, ++ Ndis802_11Encryption2Enabled, ++ Ndis802_11Encryption2KeyAbsent, ++ Ndis802_11Encryption3Enabled, ++ Ndis802_11Encryption3KeyAbsent ++} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS, ++ NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS; ++ ++ ++#define NDIS_802_11_AI_REQFI_CAPABILITIES 1 ++#define NDIS_802_11_AI_REQFI_LISTENINTERVAL 2 ++#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS 4 ++ ++#define NDIS_802_11_AI_RESFI_CAPABILITIES 1 ++#define NDIS_802_11_AI_RESFI_STATUSCODE 2 ++#define NDIS_802_11_AI_RESFI_ASSOCIATIONID 4 ++ ++typedef struct _NDIS_802_11_AI_REQFI ++{ ++ USHORT Capabilities; ++ USHORT ListenInterval; ++ NDIS_802_11_MAC_ADDRESS CurrentAPAddress; ++} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI; ++ ++typedef struct _NDIS_802_11_AI_RESFI ++{ ++ USHORT Capabilities; ++ USHORT StatusCode; ++ USHORT AssociationId; ++} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI; ++ ++typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION ++{ ++ ULONG Length; ++ USHORT AvailableRequestFixedIEs; ++ NDIS_802_11_AI_REQFI RequestFixedIEs; ++ ULONG RequestIELength; ++ ULONG OffsetRequestIEs; ++ USHORT AvailableResponseFixedIEs; ++ NDIS_802_11_AI_RESFI ResponseFixedIEs; ++ ULONG ResponseIELength; ++ ULONG OffsetResponseIEs; ++} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION; ++ ++typedef enum _NDIS_802_11_RELOAD_DEFAULTS ++{ ++ Ndis802_11ReloadWEPKeys ++} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS; ++ ++ ++// Key mapping keys require a BSSID ++typedef struct _NDIS_802_11_KEY ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; ++ ULONG KeyLength; // length of key in bytes ++ NDIS_802_11_MAC_ADDRESS BSSID; ++ NDIS_802_11_KEY_RSC KeyRSC; ++ UCHAR KeyMaterial[32]; // variable length depending on above field ++} NDIS_802_11_KEY, *PNDIS_802_11_KEY; ++ ++typedef struct _NDIS_802_11_REMOVE_KEY ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; ++ NDIS_802_11_MAC_ADDRESS BSSID; ++} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY; ++ ++typedef struct _NDIS_802_11_WEP ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; // 0 is the per-client key, 1-N are the global keys ++ ULONG KeyLength; // length of key in bytes ++ UCHAR KeyMaterial[16];// variable length depending on above field ++} NDIS_802_11_WEP, *PNDIS_802_11_WEP; ++ ++typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST ++{ ++ ULONG Length; // Length of structure ++ NDIS_802_11_MAC_ADDRESS Bssid; ++ ULONG Flags; ++} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST; ++ ++typedef enum _NDIS_802_11_STATUS_TYPE ++{ ++ Ndis802_11StatusType_Authentication, ++ Ndis802_11StatusType_MediaStreamMode, ++ Ndis802_11StatusType_PMKID_CandidateList, ++ Ndis802_11StatusTypeMax // not a real type, defined as an upper bound ++} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE; ++ ++typedef struct _NDIS_802_11_STATUS_INDICATION ++{ ++ NDIS_802_11_STATUS_TYPE StatusType; ++} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION; ++ ++// mask for authentication/integrity fields ++#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f ++#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01 ++#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE 0x02 ++#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR 0x06 ++#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E ++ ++// MIC check time, 60 seconds. ++#define MIC_CHECK_TIME 60000000 ++ ++typedef struct _NDIS_802_11_AUTHENTICATION_EVENT ++{ ++ NDIS_802_11_STATUS_INDICATION Status; ++ NDIS_802_11_AUTHENTICATION_REQUEST Request[1]; ++} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT; ++ ++typedef struct _NDIS_802_11_TEST ++{ ++ ULONG Length; ++ ULONG Type; ++ union ++ { ++ NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent; ++ NDIS_802_11_RSSI RssiTrigger; ++ }tt; ++} NDIS_802_11_TEST, *PNDIS_802_11_TEST; ++ ++ ++#endif //end of #ifdef PLATFORM_LINUX ++ ++#ifdef PLATFORM_FREEBSD ++ ++#define NDIS_802_11_LENGTH_SSID 32 ++#define NDIS_802_11_LENGTH_RATES 8 ++#define NDIS_802_11_LENGTH_RATES_EX 16 ++ ++typedef unsigned char NDIS_802_11_MAC_ADDRESS[6]; ++typedef long NDIS_802_11_RSSI; // in dBm ++typedef unsigned char NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; // Set of 8 data rates ++typedef unsigned char NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; // Set of 16 data rates ++ ++ ++typedef ULONG NDIS_802_11_KEY_INDEX; ++typedef unsigned long long NDIS_802_11_KEY_RSC; ++ ++ ++typedef struct _NDIS_802_11_SSID ++{ ++ ULONG SsidLength; ++ UCHAR Ssid[32]; ++} NDIS_802_11_SSID, *PNDIS_802_11_SSID; ++ ++typedef enum _NDIS_802_11_NETWORK_TYPE ++{ ++ Ndis802_11FH, ++ Ndis802_11DS, ++ Ndis802_11OFDM5, ++ Ndis802_11OFDM24, ++ Ndis802_11NetworkTypeMax // not a real type, defined as an upper bound ++} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE; ++ ++typedef struct _NDIS_802_11_CONFIGURATION_FH ++{ ++ ULONG Length; // Length of structure ++ ULONG HopPattern; // As defined by 802.11, MSB set ++ ULONG HopSet; // to one if non-802.11 ++ ULONG DwellTime; // units are Kusec ++} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH; ++ ++ ++/* ++ FW will only save the channel number in DSConfig. ++ ODI Handler will convert the channel number to freq. number. ++*/ ++typedef struct _NDIS_802_11_CONFIGURATION ++{ ++ ULONG Length; // Length of structure ++ ULONG BeaconPeriod; // units are Kusec ++ ULONG ATIMWindow; // units are Kusec ++ ULONG DSConfig; // Frequency, units are kHz ++ NDIS_802_11_CONFIGURATION_FH FHConfig; ++} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION; ++ ++ ++ ++typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE ++{ ++ Ndis802_11IBSS, ++ Ndis802_11Infrastructure, ++ Ndis802_11AutoUnknown, ++ Ndis802_11InfrastructureMax, // Not a real value, defined as upper bound ++ Ndis802_11APMode ++} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE; ++ ++ ++ ++ ++ ++typedef struct _NDIS_802_11_FIXED_IEs ++{ ++ UCHAR Timestamp[8]; ++ USHORT BeaconInterval; ++ USHORT Capabilities; ++} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs; ++ ++ ++ ++typedef struct _NDIS_802_11_VARIABLE_IEs ++{ ++ UCHAR ElementID; ++ UCHAR Length; ++ UCHAR data[1]; ++} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs; ++ ++ ++ ++/* ++ ++ ++ ++Length is the 4 bytes multiples of the sume of ++ sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + sizeof (NDIS_802_11_SSID) + sizeof (ULONG) +++ sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + sizeof (NDIS_802_11_CONFIGURATION) +++ sizeof (NDIS_802_11_RATES_EX) + IELength ++ ++Except the IELength, all other fields are fixed length. Therefore, we can define a marco to present the ++partial sum. ++ ++*/ ++#if 0 ++typedef struct _NDIS_WLAN_BSSID_EX ++{ ++ ULONG Length; ++ NDIS_802_11_MAC_ADDRESS MacAddress; ++ UCHAR Reserved[2];//[0]: IS beacon frame, [1]:optimum_antenna=>For antenna diversity; ++ NDIS_802_11_SSID Ssid; ++ ULONG Privacy; ++ NDIS_802_11_RSSI Rssi; ++ NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; ++ NDIS_802_11_CONFIGURATION Configuration; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; ++ NDIS_802_11_RATES_EX SupportedRates; ++ ULONG IELength; ++ UCHAR IEs[MAX_IE_SZ]; //(timestamp, beacon interval, and capability information) ++} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX; ++ ++ ++typedef struct _NDIS_802_11_BSSID_LIST_EX ++{ ++ ULONG NumberOfItems; ++ NDIS_WLAN_BSSID_EX Bssid[1]; ++} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX; ++#endif ++ ++typedef enum _NDIS_802_11_AUTHENTICATION_MODE ++{ ++ Ndis802_11AuthModeOpen, ++ Ndis802_11AuthModeShared, ++ Ndis802_11AuthModeAutoSwitch, ++ Ndis802_11AuthModeWPA, ++ Ndis802_11AuthModeWPAPSK, ++ Ndis802_11AuthModeWPANone, ++ Ndis802_11AuthModeMax // Not a real mode, defined as upper bound ++} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE; ++ ++typedef enum _NDIS_802_11_WEP_STATUS ++{ ++ Ndis802_11WEPEnabled, ++ Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled, ++ Ndis802_11WEPDisabled, ++ Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled, ++ Ndis802_11WEPKeyAbsent, ++ Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent, ++ Ndis802_11WEPNotSupported, ++ Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported, ++ Ndis802_11Encryption2Enabled, ++ Ndis802_11Encryption2KeyAbsent, ++ Ndis802_11Encryption3Enabled, ++ Ndis802_11Encryption3KeyAbsent ++} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS, ++ NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS; ++ ++ ++#define NDIS_802_11_AI_REQFI_CAPABILITIES 1 ++#define NDIS_802_11_AI_REQFI_LISTENINTERVAL 2 ++#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS 4 ++ ++#define NDIS_802_11_AI_RESFI_CAPABILITIES 1 ++#define NDIS_802_11_AI_RESFI_STATUSCODE 2 ++#define NDIS_802_11_AI_RESFI_ASSOCIATIONID 4 ++ ++typedef struct _NDIS_802_11_AI_REQFI ++{ ++ USHORT Capabilities; ++ USHORT ListenInterval; ++ NDIS_802_11_MAC_ADDRESS CurrentAPAddress; ++} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI; ++ ++typedef struct _NDIS_802_11_AI_RESFI ++{ ++ USHORT Capabilities; ++ USHORT StatusCode; ++ USHORT AssociationId; ++} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI; ++ ++typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION ++{ ++ ULONG Length; ++ USHORT AvailableRequestFixedIEs; ++ NDIS_802_11_AI_REQFI RequestFixedIEs; ++ ULONG RequestIELength; ++ ULONG OffsetRequestIEs; ++ USHORT AvailableResponseFixedIEs; ++ NDIS_802_11_AI_RESFI ResponseFixedIEs; ++ ULONG ResponseIELength; ++ ULONG OffsetResponseIEs; ++} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION; ++ ++typedef enum _NDIS_802_11_RELOAD_DEFAULTS ++{ ++ Ndis802_11ReloadWEPKeys ++} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS; ++ ++ ++// Key mapping keys require a BSSID ++typedef struct _NDIS_802_11_KEY ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; ++ ULONG KeyLength; // length of key in bytes ++ NDIS_802_11_MAC_ADDRESS BSSID; ++ NDIS_802_11_KEY_RSC KeyRSC; ++ UCHAR KeyMaterial[32]; // variable length depending on above field ++} NDIS_802_11_KEY, *PNDIS_802_11_KEY; ++ ++typedef struct _NDIS_802_11_REMOVE_KEY ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; ++ NDIS_802_11_MAC_ADDRESS BSSID; ++} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY; ++ ++typedef struct _NDIS_802_11_WEP ++{ ++ ULONG Length; // Length of this structure ++ ULONG KeyIndex; // 0 is the per-client key, 1-N are the global keys ++ ULONG KeyLength; // length of key in bytes ++ UCHAR KeyMaterial[16];// variable length depending on above field ++} NDIS_802_11_WEP, *PNDIS_802_11_WEP; ++ ++typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST ++{ ++ ULONG Length; // Length of structure ++ NDIS_802_11_MAC_ADDRESS Bssid; ++ ULONG Flags; ++} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST; ++ ++typedef enum _NDIS_802_11_STATUS_TYPE ++{ ++ Ndis802_11StatusType_Authentication, ++ Ndis802_11StatusType_MediaStreamMode, ++ Ndis802_11StatusType_PMKID_CandidateList, ++ Ndis802_11StatusTypeMax // not a real type, defined as an upper bound ++} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE; ++ ++typedef struct _NDIS_802_11_STATUS_INDICATION ++{ ++ NDIS_802_11_STATUS_TYPE StatusType; ++} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION; ++ ++// mask for authentication/integrity fields ++#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f ++#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01 ++#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE 0x02 ++#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR 0x06 ++#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E ++ ++// MIC check time, 60 seconds. ++#define MIC_CHECK_TIME 60000000 ++ ++typedef struct _NDIS_802_11_AUTHENTICATION_EVENT ++{ ++ NDIS_802_11_STATUS_INDICATION Status; ++ NDIS_802_11_AUTHENTICATION_REQUEST Request[1]; ++} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT; ++ ++typedef struct _NDIS_802_11_TEST ++{ ++ ULONG Length; ++ ULONG Type; ++ union ++ { ++ NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent; ++ NDIS_802_11_RSSI RssiTrigger; ++ }tt; ++} NDIS_802_11_TEST, *PNDIS_802_11_TEST; ++ ++ ++#endif //PLATFORM_FREEBSD ++#ifndef Ndis802_11APMode ++#define Ndis802_11APMode (Ndis802_11InfrastructureMax+1) ++#endif ++ ++typedef struct _WLAN_PHY_INFO ++{ ++ u8 SignalStrength;//(in percentage) ++ u8 SignalQuality;//(in percentage) ++ u8 Optimum_antenna; //for Antenna diversity ++ u8 Reserved_0; ++}WLAN_PHY_INFO,*PWLAN_PHY_INFO; ++ ++/* temporally add #pragma pack for structure alignment issue of ++* WLAN_BSSID_EX and get_WLAN_BSSID_EX_sz() ++*/ ++#ifdef PLATFORM_WINDOWS ++#pragma pack(push) ++#pragma pack(1) ++#endif ++typedef struct _WLAN_BSSID_EX ++{ ++ ULONG Length; ++ NDIS_802_11_MAC_ADDRESS MacAddress; ++ UCHAR Reserved[2];//[0]: IS beacon frame ++ NDIS_802_11_SSID Ssid; ++ ULONG Privacy; ++ NDIS_802_11_RSSI Rssi;//(in dBM,raw data ,get from PHY) ++ NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; ++ NDIS_802_11_CONFIGURATION Configuration; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; ++ NDIS_802_11_RATES_EX SupportedRates; ++ WLAN_PHY_INFO PhyInfo; ++ ULONG IELength; ++ UCHAR IEs[MAX_IE_SZ]; //(timestamp, beacon interval, and capability information) ++} ++#ifndef PLATFORM_WINDOWS ++__attribute__((packed)) ++#endif ++WLAN_BSSID_EX, *PWLAN_BSSID_EX; ++#ifdef PLATFORM_WINDOWS ++#pragma pack(pop) ++#endif ++ ++__inline static uint get_WLAN_BSSID_EX_sz(WLAN_BSSID_EX *bss) ++{ ++ return (sizeof(WLAN_BSSID_EX) - MAX_IE_SZ + bss->IELength); ++} ++ ++struct wlan_network { ++ _list list; ++ int network_type; //refer to ieee80211.h for WIRELESS_11A/B/G ++ int fixed; // set to fixed when not to be removed as site-surveying ++ unsigned long last_scanned; //timestamp for the network ++ int aid; //will only be valid when a BSS is joinned. ++ int join_res; ++ WLAN_BSSID_EX network; //must be the last item ++#ifdef PLATFORM_WINDOWS ++ unsigned char iebuf[MAX_IE_SZ]; ++#endif ++ ++}; ++ ++enum VRTL_CARRIER_SENSE ++{ ++ DISABLE_VCS, ++ ENABLE_VCS, ++ AUTO_VCS ++}; ++ ++enum VCS_TYPE ++{ ++ NONE_VCS, ++ RTS_CTS, ++ CTS_TO_SELF ++}; ++ ++ ++ ++ ++#define PWR_CAM 0 ++#define PWR_MINPS 1 ++#define PWR_MAXPS 2 ++#define PWR_UAPSD 3 ++#define PWR_VOIP 4 ++ ++ ++enum UAPSD_MAX_SP ++{ ++ NO_LIMIT, ++ TWO_MSDU, ++ FOUR_MSDU, ++ SIX_MSDU ++}; ++ ++ ++//john ++#define NUM_PRE_AUTH_KEY 16 ++#define NUM_PMKID_CACHE NUM_PRE_AUTH_KEY ++ ++/* ++* WPA2 ++*/ ++ ++#ifndef PLATFORM_OS_CE ++typedef struct _PMKID_CANDIDATE { ++ NDIS_802_11_MAC_ADDRESS BSSID; ++ ULONG Flags; ++} PMKID_CANDIDATE, *PPMKID_CANDIDATE; ++ ++typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST ++{ ++ ULONG Version; // Version of the structure ++ ULONG NumCandidates; // No. of pmkid candidates ++ PMKID_CANDIDATE CandidateList[1]; ++} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST; ++ ++ ++typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION ++{ ++ NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported; ++ NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported; ++ ++} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION; ++ ++typedef struct _NDIS_802_11_CAPABILITY ++{ ++ ULONG Length; ++ ULONG Version; ++ ULONG NoOfPMKIDs; ++ ULONG NoOfAuthEncryptPairsSupported; ++ NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1]; ++ ++} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY; ++#endif ++ ++ ++#endif //#ifndef WLAN_BSSDEF_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/xmit_osdep.h b/drivers/net/wireless/realtek/rtl8192cu/include/xmit_osdep.h +new file mode 100644 +index 000000000000..0f6d09237bcf +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/xmit_osdep.h +@@ -0,0 +1,94 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#ifndef __XMIT_OSDEP_H_ ++#define __XMIT_OSDEP_H_ ++ ++#include ++#include ++#include ++ ++struct pkt_file { ++ _pkt *pkt; ++ SIZE_T pkt_len; //the remainder length of the open_file ++ _buffer *cur_buffer; ++ u8 *buf_start; ++ u8 *cur_addr; ++ SIZE_T buf_len; ++}; ++ ++#ifdef PLATFORM_WINDOWS ++ ++#ifdef PLATFORM_OS_XP ++#ifdef CONFIG_USB_HCI ++#include ++#include ++#include ++#endif ++#endif ++ ++#define NR_XMITFRAME 128 ++ ++#define ETH_ALEN 6 ++ ++extern NDIS_STATUS rtw_xmit_entry( ++IN _nic_hdl cnxt, ++IN NDIS_PACKET *pkt, ++IN UINT flags ++); ++ ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++#define NR_XMITFRAME 256 ++extern int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev); ++extern void rtw_xmit_entry_wrap (struct ifnet * pifp); ++#endif //PLATFORM_FREEBSD ++ ++#ifdef PLATFORM_LINUX ++ ++#define NR_XMITFRAME 256 ++ ++struct xmit_priv; ++struct pkt_attrib; ++struct sta_xmit_priv; ++struct xmit_frame; ++struct xmit_buf; ++ ++extern int _rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev); ++extern int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev); ++ ++#endif ++ ++void rtw_os_xmit_schedule(_adapter *padapter); ++ ++int rtw_os_xmit_resource_alloc(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 alloc_sz); ++void rtw_os_xmit_resource_free(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 free_sz); ++ ++extern void rtw_set_tx_chksum_offload(_pkt *pkt, struct pkt_attrib *pattrib); ++ ++extern uint rtw_remainder_len(struct pkt_file *pfile); ++extern void _rtw_open_pktfile(_pkt *pkt, struct pkt_file *pfile); ++extern uint _rtw_pktfile_read (struct pkt_file *pfile, u8 *rmem, uint rlen); ++extern sint rtw_endofpktfile (struct pkt_file *pfile); ++ ++extern void rtw_os_pkt_complete(_adapter *padapter, _pkt *pkt); ++extern void rtw_os_xmit_complete(_adapter *padapter, struct xmit_frame *pxframe); ++ ++#endif //__XMIT_OSDEP_H_ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c +new file mode 100644 +index 000000000000..60e92b82aa23 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c +@@ -0,0 +1,5488 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _IOCTL_CFG80211_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ ++#include "ioctl_cfg80211.h" ++ ++#define RTW_MAX_MGMT_TX_CNT (8) ++ ++#define RTW_SCAN_IE_LEN_MAX 2304 ++#define RTW_MAX_REMAIN_ON_CHANNEL_DURATION 65535 //ms ++#define RTW_MAX_NUM_PMKIDS 4 ++ ++#define RTW_CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */ ++ ++static const u32 rtw_cipher_suites[] = { ++ WLAN_CIPHER_SUITE_WEP40, ++ WLAN_CIPHER_SUITE_WEP104, ++ WLAN_CIPHER_SUITE_TKIP, ++ WLAN_CIPHER_SUITE_CCMP, ++#ifdef CONFIG_IEEE80211W ++ WLAN_CIPHER_SUITE_AES_CMAC, ++#endif //CONFIG_IEEE80211W ++}; ++ ++#define RATETAB_ENT(_rate, _rateid, _flags) \ ++ { \ ++ .bitrate = (_rate), \ ++ .hw_value = (_rateid), \ ++ .flags = (_flags), \ ++ } ++ ++#define CHAN2G(_channel, _freq, _flags) { \ ++ .band = IEEE80211_BAND_2GHZ, \ ++ .center_freq = (_freq), \ ++ .hw_value = (_channel), \ ++ .flags = (_flags), \ ++ .max_antenna_gain = 0, \ ++ .max_power = 30, \ ++} ++ ++#define CHAN5G(_channel, _flags) { \ ++ .band = IEEE80211_BAND_5GHZ, \ ++ .center_freq = 5000 + (5 * (_channel)), \ ++ .hw_value = (_channel), \ ++ .flags = (_flags), \ ++ .max_antenna_gain = 0, \ ++ .max_power = 30, \ ++} ++ ++static struct ieee80211_rate rtw_rates[] = { ++ RATETAB_ENT(10, 0x1, 0), ++ RATETAB_ENT(20, 0x2, 0), ++ RATETAB_ENT(55, 0x4, 0), ++ RATETAB_ENT(110, 0x8, 0), ++ RATETAB_ENT(60, 0x10, 0), ++ RATETAB_ENT(90, 0x20, 0), ++ RATETAB_ENT(120, 0x40, 0), ++ RATETAB_ENT(180, 0x80, 0), ++ RATETAB_ENT(240, 0x100, 0), ++ RATETAB_ENT(360, 0x200, 0), ++ RATETAB_ENT(480, 0x400, 0), ++ RATETAB_ENT(540, 0x800, 0), ++}; ++ ++#define rtw_a_rates (rtw_rates + 4) ++#define RTW_A_RATES_NUM 8 ++#define rtw_g_rates (rtw_rates + 0) ++#define RTW_G_RATES_NUM 12 ++ ++#define RTW_2G_CHANNELS_NUM 14 ++#define RTW_5G_CHANNELS_NUM 37 ++ ++static struct ieee80211_channel rtw_2ghz_channels[] = { ++ CHAN2G(1, 2412, 0), ++ CHAN2G(2, 2417, 0), ++ CHAN2G(3, 2422, 0), ++ CHAN2G(4, 2427, 0), ++ CHAN2G(5, 2432, 0), ++ CHAN2G(6, 2437, 0), ++ CHAN2G(7, 2442, 0), ++ CHAN2G(8, 2447, 0), ++ CHAN2G(9, 2452, 0), ++ CHAN2G(10, 2457, 0), ++ CHAN2G(11, 2462, 0), ++ CHAN2G(12, 2467, 0), ++ CHAN2G(13, 2472, 0), ++ CHAN2G(14, 2484, 0), ++}; ++ ++static struct ieee80211_channel rtw_5ghz_a_channels[] = { ++ CHAN5G(34, 0), CHAN5G(36, 0), ++ CHAN5G(38, 0), CHAN5G(40, 0), ++ CHAN5G(42, 0), CHAN5G(44, 0), ++ CHAN5G(46, 0), CHAN5G(48, 0), ++ CHAN5G(52, 0), CHAN5G(56, 0), ++ CHAN5G(60, 0), CHAN5G(64, 0), ++ CHAN5G(100, 0), CHAN5G(104, 0), ++ CHAN5G(108, 0), CHAN5G(112, 0), ++ CHAN5G(116, 0), CHAN5G(120, 0), ++ CHAN5G(124, 0), CHAN5G(128, 0), ++ CHAN5G(132, 0), CHAN5G(136, 0), ++ CHAN5G(140, 0), CHAN5G(149, 0), ++ CHAN5G(153, 0), CHAN5G(157, 0), ++ CHAN5G(161, 0), CHAN5G(165, 0), ++ CHAN5G(184, 0), CHAN5G(188, 0), ++ CHAN5G(192, 0), CHAN5G(196, 0), ++ CHAN5G(200, 0), CHAN5G(204, 0), ++ CHAN5G(208, 0), CHAN5G(212, 0), ++ CHAN5G(216, 0), ++}; ++ ++ ++void rtw_2g_channels_init(struct ieee80211_channel *channels) ++{ ++ _rtw_memcpy((void*)channels, (void*)rtw_2ghz_channels, ++ sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM ++ ); ++} ++ ++void rtw_5g_channels_init(struct ieee80211_channel *channels) ++{ ++ _rtw_memcpy((void*)channels, (void*)rtw_5ghz_a_channels, ++ sizeof(struct ieee80211_channel)*RTW_5G_CHANNELS_NUM ++ ); ++} ++ ++void rtw_2g_rates_init(struct ieee80211_rate *rates) ++{ ++ _rtw_memcpy(rates, rtw_g_rates, ++ sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM ++ ); ++} ++ ++void rtw_5g_rates_init(struct ieee80211_rate *rates) ++{ ++ _rtw_memcpy(rates, rtw_a_rates, ++ sizeof(struct ieee80211_rate)*RTW_A_RATES_NUM ++ ); ++} ++ ++struct ieee80211_supported_band *rtw_spt_band_alloc( ++ enum ieee80211_band band ++ ) ++{ ++ struct ieee80211_supported_band *spt_band = NULL; ++ int n_channels, n_bitrates; ++ ++ if(band == IEEE80211_BAND_2GHZ) ++ { ++ n_channels = RTW_2G_CHANNELS_NUM; ++ n_bitrates = RTW_G_RATES_NUM; ++ } ++ else if(band == IEEE80211_BAND_5GHZ) ++ { ++ n_channels = RTW_5G_CHANNELS_NUM; ++ n_bitrates = RTW_A_RATES_NUM; ++ } ++ else ++ { ++ goto exit; ++ } ++ ++ spt_band = (struct ieee80211_supported_band *)rtw_zmalloc( ++ sizeof(struct ieee80211_supported_band) ++ + sizeof(struct ieee80211_channel)*n_channels ++ + sizeof(struct ieee80211_rate)*n_bitrates ++ ); ++ if(!spt_band) ++ goto exit; ++ ++ spt_band->channels = (struct ieee80211_channel*)(((u8*)spt_band)+sizeof(struct ieee80211_supported_band)); ++ spt_band->bitrates= (struct ieee80211_rate*)(((u8*)spt_band->channels)+sizeof(struct ieee80211_channel)*n_channels); ++ spt_band->band = band; ++ spt_band->n_channels = n_channels; ++ spt_band->n_bitrates = n_bitrates; ++ ++ if(band == IEEE80211_BAND_2GHZ) ++ { ++ rtw_2g_channels_init(spt_band->channels); ++ rtw_2g_rates_init(spt_band->bitrates); ++ } ++ else if(band == IEEE80211_BAND_5GHZ) ++ { ++ rtw_5g_channels_init(spt_band->channels); ++ rtw_5g_rates_init(spt_band->bitrates); ++ } ++ ++ //spt_band.ht_cap ++ ++exit: ++ ++ return spt_band; ++} ++ ++void rtw_spt_band_free(struct ieee80211_supported_band *spt_band) ++{ ++ u32 size; ++ ++ if(!spt_band) ++ return; ++ ++ if(spt_band->band == IEEE80211_BAND_2GHZ) ++ { ++ size = sizeof(struct ieee80211_supported_band) ++ + sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM ++ + sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM; ++ } ++ else if(spt_band->band == IEEE80211_BAND_5GHZ) ++ { ++ size = sizeof(struct ieee80211_supported_band) ++ + sizeof(struct ieee80211_channel)*RTW_5G_CHANNELS_NUM ++ + sizeof(struct ieee80211_rate)*RTW_A_RATES_NUM; ++ } ++ else ++ { ++ ++ } ++ rtw_mfree((u8*)spt_band, size); ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++static const struct ieee80211_txrx_stypes ++rtw_cfg80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { ++ [NL80211_IFTYPE_ADHOC] = { ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) ++ }, ++ [NL80211_IFTYPE_STATION] = { ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | ++ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) ++ }, ++ [NL80211_IFTYPE_AP] = { ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | ++ BIT(IEEE80211_STYPE_DISASSOC >> 4) | ++ BIT(IEEE80211_STYPE_AUTH >> 4) | ++ BIT(IEEE80211_STYPE_DEAUTH >> 4) | ++ BIT(IEEE80211_STYPE_ACTION >> 4) ++ }, ++ [NL80211_IFTYPE_AP_VLAN] = { ++ /* copy AP */ ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | ++ BIT(IEEE80211_STYPE_DISASSOC >> 4) | ++ BIT(IEEE80211_STYPE_AUTH >> 4) | ++ BIT(IEEE80211_STYPE_DEAUTH >> 4) | ++ BIT(IEEE80211_STYPE_ACTION >> 4) ++ }, ++ [NL80211_IFTYPE_P2P_CLIENT] = { ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | ++ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) ++ }, ++ [NL80211_IFTYPE_P2P_GO] = { ++ .tx = 0xffff, ++ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | ++ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | ++ BIT(IEEE80211_STYPE_DISASSOC >> 4) | ++ BIT(IEEE80211_STYPE_AUTH >> 4) | ++ BIT(IEEE80211_STYPE_DEAUTH >> 4) | ++ BIT(IEEE80211_STYPE_ACTION >> 4) ++ }, ++}; ++#endif ++ ++static int rtw_ieee80211_channel_to_frequency(int chan, int band) ++{ ++ /* see 802.11 17.3.8.3.2 and Annex J ++ * there are overlapping channel numbers in 5GHz and 2GHz bands */ ++ ++ if (band == IEEE80211_BAND_5GHZ) { ++ if (chan >= 182 && chan <= 196) ++ return 4000 + chan * 5; ++ else ++ return 5000 + chan * 5; ++ } else { /* IEEE80211_BAND_2GHZ */ ++ if (chan == 14) ++ return 2484; ++ else if (chan < 14) ++ return 2407 + chan * 5; ++ else ++ return 0; /* not supported */ ++ } ++} ++ ++#define MAX_BSSINFO_LEN 1000 ++static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnetwork) ++{ ++ int ret=0; ++ struct ieee80211_channel *notify_channel; ++ struct cfg80211_bss *bss; ++ //struct ieee80211_supported_band *band; ++ u16 channel; ++ u32 freq; ++ u64 notify_timestamp; ++ u16 notify_capability; ++ u16 notify_interval; ++ u8 *notify_ie; ++ size_t notify_ielen; ++ s32 notify_signal; ++ u8 buf[MAX_BSSINFO_LEN], *pbuf; ++ size_t len,bssinf_len=0; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ u8 bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ ++ struct wireless_dev *wdev = padapter->rtw_wdev; ++ struct wiphy *wiphy = wdev->wiphy; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ ++ //DBG_8192C("%s\n", __func__); ++ ++ bssinf_len = pnetwork->network.IELength+sizeof (struct rtw_ieee80211_hdr_3addr); ++ if(bssinf_len > MAX_BSSINFO_LEN){ ++ DBG_871X("%s IE Length too long > %d byte \n",__FUNCTION__,MAX_BSSINFO_LEN); ++ goto exit; ++ } ++ ++ //To reduce PBC Overlap rate ++ //_enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++ if(wdev_to_priv(wdev)->scan_request != NULL) ++ { ++ u8 *psr=NULL, sr = 0; ++ NDIS_802_11_SSID *pssid = &pnetwork->network.Ssid; ++ struct cfg80211_scan_request *request = wdev_to_priv(wdev)->scan_request; ++ struct cfg80211_ssid *ssids = request->ssids; ++ u32 wpsielen=0; ++ u8 *wpsie=NULL; ++ ++ wpsie = rtw_get_wps_ie(pnetwork->network.IEs+_FIXED_IE_LENGTH_, pnetwork->network.IELength-_FIXED_IE_LENGTH_, NULL, &wpsielen); ++ ++ if(wpsie && wpsielen>0) ++ psr = rtw_get_wps_attr_content(wpsie, wpsielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL); ++ ++ if (sr != 0) ++ { ++ if(request->n_ssids == 1 && request->n_channels == 1) // it means under processing WPS ++ { ++ DBG_8192C("ssid=%s, len=%d\n", pssid->Ssid, pssid->SsidLength); ++ ++ if(pssid->SsidLength == ssids[0].ssid_len && ++ _rtw_memcmp(pssid->Ssid, ssids[0].ssid, ssids[0].ssid_len)) ++ { ++ DBG_871X("%s, got sr and ssid match!\n", __func__); ++ } ++ else ++ { ++ if(psr !=NULL) ++ *psr = 0; //clear sr ++ ++#if 0 ++ WLAN_BSSID_EX *pselect_network = &pnetwork->network; ++ struct cfg80211_bss *pselect_bss = NULL; ++ struct ieee80211_channel *notify_channel = NULL; ++ u32 freq; ++ ++ DBG_871X("%s, got sr, but ssid mismatch, to remove this bss\n", __func__); ++ ++ if (pselect_network->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_5GHZ); ++ ++ notify_channel = ieee80211_get_channel(wiphy, freq); ++ pselect_bss = cfg80211_get_bss(wiphy, NULL/*notify_channel*/, ++ pselect_network->MacAddress, pselect_network->Ssid.Ssid, ++ pselect_network->Ssid.SsidLength, 0/*WLAN_CAPABILITY_ESS*/, ++ 0/*WLAN_CAPABILITY_ESS*/); ++ ++ if(pselect_bss) ++ { ++ DBG_871X("%s, got bss for cfg80211 for unlinking bss\n", __func__); ++ ++ cfg80211_unlink_bss(wiphy, pselect_bss); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0) ++ cfg80211_put_bss(wiphy, pselect_bss); ++#else ++ cfg80211_put_bss(pselect_bss); ++#endif ++ ++ } ++ ++ goto exit; ++#endif ++ } ++ } ++ } ++ } ++ //_exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++ ++ channel = pnetwork->network.Configuration.DSConfig; ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++ notify_channel = ieee80211_get_channel(wiphy, freq); ++ ++ //rtw_get_timestampe_from_ie() ++ notify_timestamp = jiffies_to_msecs(jiffies)*1000; /* uSec */ ++ ++ notify_interval = le16_to_cpu(*(u16*)rtw_get_beacon_interval_from_ie(pnetwork->network.IEs)); ++ notify_capability = le16_to_cpu(*(u16*)rtw_get_capability_from_ie(pnetwork->network.IEs)); ++ ++ ++ notify_ie = pnetwork->network.IEs+_FIXED_IE_LENGTH_; ++ notify_ielen = pnetwork->network.IELength-_FIXED_IE_LENGTH_; ++ ++ //We've set wiphy's signal_type as CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm) ++ if ( check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE && ++ is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) { ++ notify_signal = 100*translate_percentage_to_dbm(padapter->recvpriv.signal_strength);//dbm ++ } else { ++ notify_signal = 100*translate_percentage_to_dbm(pnetwork->network.PhyInfo.SignalStrength);//dbm ++ } ++ ++/* ++ DBG_8192C("bssid: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", ++ pnetwork->network.MacAddress[0], pnetwork->network.MacAddress[1], pnetwork->network.MacAddress[2], ++ pnetwork->network.MacAddress[3], pnetwork->network.MacAddress[4], pnetwork->network.MacAddress[5]); ++ DBG_8192C("Channel: %d(%d)\n", channel, freq); ++ DBG_8192C("Capability: %X\n", notify_capability); ++ DBG_8192C("Beacon interval: %d\n", notify_interval); ++ DBG_8192C("Signal: %d\n", notify_signal); ++ DBG_8192C("notify_timestamp: %#018llx\n", notify_timestamp); ++*/ ++ ++ pbuf = buf; ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pbuf; ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/); ++ //pmlmeext->mgnt_seq++; ++ ++ if (pnetwork->network.Reserved[0] == 1) { // WIFI_BEACON ++ _rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN); ++ SetFrameSubType(pbuf, WIFI_BEACON); ++ } else { ++ _rtw_memcpy(pwlanhdr->addr1, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ SetFrameSubType(pbuf, WIFI_PROBERSP); ++ } ++ ++ _rtw_memcpy(pwlanhdr->addr2, pnetwork->network.MacAddress, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pnetwork->network.MacAddress, ETH_ALEN); ++ ++ ++ pbuf += sizeof(struct rtw_ieee80211_hdr_3addr); ++ len = sizeof (struct rtw_ieee80211_hdr_3addr); ++ ++ _rtw_memcpy(pbuf, pnetwork->network.IEs, pnetwork->network.IELength); ++ len += pnetwork->network.IELength; ++ ++ //#ifdef CONFIG_P2P ++ //if(rtw_get_p2p_ie(pnetwork->network.IEs+12, pnetwork->network.IELength-12, NULL, NULL)) ++ //{ ++ // DBG_8192C("%s, got p2p_ie\n", __func__); ++ //} ++ //#endif ++ ++ ++#if 1 ++ bss = cfg80211_inform_bss_frame(wiphy, notify_channel, (struct ieee80211_mgmt *)buf, ++ len, notify_signal, GFP_ATOMIC); ++#else ++ ++ bss = cfg80211_inform_bss(wiphy, notify_channel, (const u8 *)pnetwork->network.MacAddress, ++ notify_timestamp, notify_capability, notify_interval, notify_ie, ++ notify_ielen, notify_signal, GFP_ATOMIC/*GFP_KERNEL*/); ++#endif ++ ++ if (unlikely(!bss)) { ++ DBG_8192C("rtw_cfg80211_inform_bss error\n"); ++ return -EINVAL; ++ } ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)) ++#ifndef COMPAT_KERNEL_RELEASE ++ //patch for cfg80211, update beacon ies to information_elements ++ if (pnetwork->network.Reserved[0] == 1) { // WIFI_BEACON ++ ++ if(bss->len_information_elements != bss->len_beacon_ies) ++ { ++ bss->information_elements = bss->beacon_ies; ++ bss->len_information_elements = bss->len_beacon_ies; ++ } ++ } ++#endif //COMPAT_KERNEL_RELEASE ++#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ++ ++/* ++ { ++ if( bss->information_elements == bss->proberesp_ies) ++ { ++ if( bss->len_information_elements != bss->len_proberesp_ies) ++ { ++ DBG_8192C("error!, len_information_elements != bss->len_proberesp_ies\n"); ++ } ++ ++ } ++ else if(bss->len_information_elements < bss->len_beacon_ies) ++ { ++ bss->information_elements = bss->beacon_ies; ++ bss->len_information_elements = bss->len_beacon_ies; ++ } ++ } ++*/ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0) ++ cfg80211_put_bss(wiphy, bss); ++#else ++ cfg80211_put_bss(bss); ++#endif ++ ++exit: ++ return ret; ++ ++} ++ ++/* ++ Check the given bss is valid by kernel API cfg80211_get_bss() ++ @padapter : the given adapter ++ ++ return _TRUE if bss is valid, _FALSE for not found. ++*/ ++int rtw_cfg80211_check_bss(_adapter *padapter) ++{ ++ WLAN_BSSID_EX *pnetwork = &(padapter->mlmeextpriv.mlmext_info.network); ++ struct cfg80211_bss *bss = NULL; ++ struct ieee80211_channel *notify_channel = NULL; ++ u32 freq; ++ ++ if (!(pnetwork) || !(padapter->rtw_wdev)) ++ return _FALSE; ++ ++ if (pnetwork->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_5GHZ); ++ ++ notify_channel = ieee80211_get_channel(padapter->rtw_wdev->wiphy, freq); ++ bss = cfg80211_get_bss(padapter->rtw_wdev->wiphy, notify_channel, ++ pnetwork->MacAddress, pnetwork->Ssid.Ssid, ++ pnetwork->Ssid.SsidLength, ++ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); ++ ++ return (bss!=NULL); ++} ++ ++void rtw_cfg80211_indicate_connect(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ struct wireless_dev *pwdev = padapter->rtw_wdev; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif ++ struct cfg80211_bss *bss = NULL; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ if (pwdev->iftype != NL80211_IFTYPE_STATION ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ && pwdev->iftype != NL80211_IFTYPE_P2P_CLIENT ++ #endif ++ ) { ++ return; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ return; ++ ++#ifdef CONFIG_P2P ++ if(pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo)); ++ } ++ } ++#endif //CONFIG_P2P ++ ++ #ifdef CONFIG_LAYER2_ROAMING ++ if (rtw_to_roaming(padapter) > 0) { ++ #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 39) || defined(COMPAT_KERNEL_RELEASE) ++ struct wiphy *wiphy = pwdev->wiphy; ++ struct ieee80211_channel *notify_channel; ++ u32 freq; ++ u16 channel = cur_network->network.Configuration.DSConfig; ++ ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++ notify_channel = ieee80211_get_channel(wiphy, freq); ++ #endif ++ ++ DBG_871X("%s call cfg80211_roamed\n", __FUNCTION__); ++ cfg80211_roamed(padapter->pnetdev ++ #if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 39) || defined(COMPAT_KERNEL_RELEASE) ++ , notify_channel ++ #endif ++ , cur_network->network.MacAddress ++ , pmlmepriv->assoc_req+sizeof(struct rtw_ieee80211_hdr_3addr)+2 ++ , pmlmepriv->assoc_req_len-sizeof(struct rtw_ieee80211_hdr_3addr)-2 ++ , pmlmepriv->assoc_rsp+sizeof(struct rtw_ieee80211_hdr_3addr)+6 ++ , pmlmepriv->assoc_rsp_len-sizeof(struct rtw_ieee80211_hdr_3addr)-6 ++ , GFP_ATOMIC); ++ } ++ else ++ #endif ++ { ++ DBG_8192C("pwdev->sme_state(b)=%d\n", pwdev->sme_state); ++ cfg80211_connect_result(padapter->pnetdev, cur_network->network.MacAddress ++ , pmlmepriv->assoc_req+sizeof(struct rtw_ieee80211_hdr_3addr)+2 ++ , pmlmepriv->assoc_req_len-sizeof(struct rtw_ieee80211_hdr_3addr)-2 ++ , pmlmepriv->assoc_rsp+sizeof(struct rtw_ieee80211_hdr_3addr)+6 ++ , pmlmepriv->assoc_rsp_len-sizeof(struct rtw_ieee80211_hdr_3addr)-6 ++ , WLAN_STATUS_SUCCESS, GFP_ATOMIC); ++ DBG_8192C("pwdev->sme_state(a)=%d\n", pwdev->sme_state); ++ } ++} ++ ++void rtw_cfg80211_indicate_disconnect(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct wireless_dev *pwdev = padapter->rtw_wdev; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++ if (pwdev->iftype != NL80211_IFTYPE_STATION ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ && pwdev->iftype != NL80211_IFTYPE_P2P_CLIENT ++ #endif ++ ) { ++ return; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ return; ++ ++#ifdef CONFIG_P2P ++ if( pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++ ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ ++ DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo)); ++ } ++ } ++#endif //CONFIG_P2P ++ ++ if (!padapter->mlmepriv.not_indic_disco) { ++ DBG_8192C("pwdev->sme_state(b)=%d\n", pwdev->sme_state); ++ ++ if(pwdev->sme_state==CFG80211_SME_CONNECTING) ++ cfg80211_connect_result(padapter->pnetdev, NULL, NULL, 0, NULL, 0, ++ WLAN_STATUS_UNSPECIFIED_FAILURE, GFP_ATOMIC/*GFP_KERNEL*/); ++ else if(pwdev->sme_state==CFG80211_SME_CONNECTED) ++ cfg80211_disconnected(padapter->pnetdev, 0, NULL, 0, GFP_ATOMIC); ++ //else ++ //DBG_8192C("pwdev->sme_state=%d\n", pwdev->sme_state); ++ ++ DBG_8192C("pwdev->sme_state(a)=%d\n", pwdev->sme_state); ++ } ++} ++ ++ ++#ifdef CONFIG_AP_MODE ++static u8 set_pairwise_key(_adapter *padapter, struct sta_info *psta) ++{ ++ struct cmd_obj* ph2c; ++ struct set_stakey_parm *psetstakey_para; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if ( ph2c == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm)); ++ if(psetstakey_para==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_); ++ ++ ++ psetstakey_para->algorithm = (u8)psta->dot118021XPrivacy; ++ ++ _rtw_memcpy(psetstakey_para->addr, psta->hwaddr, ETH_ALEN); ++ ++ _rtw_memcpy(psetstakey_para->key, &psta->dot118021x_UncstKey, 16); ++ ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++ return res; ++ ++} ++ ++static int set_group_key(_adapter *padapter, u8 *key, u8 alg, int keyid) ++{ ++ u8 keylen; ++ struct cmd_obj* pcmd; ++ struct setkey_parm *psetkeyparm; ++ struct cmd_priv *pcmdpriv=&(padapter->cmdpriv); ++ int res=_SUCCESS; ++ ++ DBG_8192C("%s\n", __FUNCTION__); ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm)); ++ if(psetkeyparm==NULL){ ++ rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm)); ++ ++ psetkeyparm->keyid=(u8)keyid; ++ if (is_wep_enc(alg)) ++ padapter->securitypriv.key_mask |= BIT(psetkeyparm->keyid); ++ ++ psetkeyparm->algorithm = alg; ++ ++ psetkeyparm->set_tx = 1; ++ ++ switch(alg) ++ { ++ case _WEP40_: ++ keylen = 5; ++ break; ++ case _WEP104_: ++ keylen = 13; ++ break; ++ case _TKIP_: ++ case _TKIP_WTMIC_: ++ case _AES_: ++ keylen = 16; ++ default: ++ keylen = 16; ++ } ++ ++ _rtw_memcpy(&(psetkeyparm->key[0]), key, keylen); ++ ++ pcmd->cmdcode = _SetKey_CMD_; ++ pcmd->parmbuf = (u8 *)psetkeyparm; ++ pcmd->cmdsz = (sizeof(struct setkey_parm)); ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ ++ _rtw_init_listhead(&pcmd->list); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++ return res; ++ ++ ++} ++ ++static int set_wep_key(_adapter *padapter, u8 *key, u8 keylen, int keyid) ++{ ++ u8 alg; ++ ++ switch(keylen) ++ { ++ case 5: ++ alg =_WEP40_; ++ break; ++ case 13: ++ alg =_WEP104_; ++ break; ++ default: ++ alg =_NO_PRIVACY_; ++ } ++ ++ return set_group_key(padapter, key, alg, keyid); ++ ++} ++ ++static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len) ++{ ++ int ret = 0; ++ u32 wep_key_idx, wep_key_len,wep_total_len; ++ struct sta_info *psta = NULL, *pbcmc_sta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_8192C("%s\n", __FUNCTION__); ++ ++ param->u.crypt.err = 0; ++ param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0'; ++ ++ //sizeof(struct ieee_param) = 64 bytes; ++ //if (param_len != (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len) ++ if (param_len != sizeof(struct ieee_param) + param->u.crypt.key_len) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ if (param->u.crypt.idx >= WEP_KEYS) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ } ++ else ++ { ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(!psta) ++ { ++ //ret = -EINVAL; ++ DBG_8192C("rtw_set_encryption(), sta has already been removed or never been added\n"); ++ goto exit; ++ } ++ } ++ ++ if (strcmp(param->u.crypt.alg, "none") == 0 && (psta==NULL)) ++ { ++ //todo:clear default encryption keys ++ ++ DBG_8192C("clear default encryption keys, keyid=%d\n", param->u.crypt.idx); ++ ++ goto exit; ++ } ++ ++ ++ if (strcmp(param->u.crypt.alg, "WEP") == 0 && (psta==NULL)) ++ { ++ DBG_8192C("r871x_set_encryption, crypt.alg = WEP\n"); ++ ++ wep_key_idx = param->u.crypt.idx; ++ wep_key_len = param->u.crypt.key_len; ++ ++ DBG_8192C("r871x_set_encryption, wep_key_idx=%d, len=%d\n", wep_key_idx, wep_key_len); ++ ++ if((wep_key_idx >= WEP_KEYS) || (wep_key_len<=0)) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (wep_key_len > 0) ++ { ++ wep_key_len = wep_key_len <= 5 ? 5 : 13; ++ } ++ ++ if (psecuritypriv->bWepDefaultKeyIdxSet == 0) ++ { ++ //wep default key has not been set, so use this key index as default key. ++ ++ psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP40_; ++ psecuritypriv->dot118021XGrpPrivacy=_WEP40_; ++ ++ if(wep_key_len == 13) ++ { ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP104_; ++ psecuritypriv->dot118021XGrpPrivacy=_WEP104_; ++ } ++ ++ psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx; ++ } ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), param->u.crypt.key, wep_key_len); ++ ++ psecuritypriv->dot11DefKeylen[wep_key_idx] = wep_key_len; ++ ++ set_wep_key(padapter, param->u.crypt.key, wep_key_len, wep_key_idx); ++ ++ goto exit; ++ ++ } ++ ++ ++ if(!psta && check_fwstate(pmlmepriv, WIFI_AP_STATE)) // //group key ++ { ++ if(param->u.crypt.set_tx == 0) //group key ++ { ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ DBG_8192C("%s, set group_key, WEP\n", __FUNCTION__); ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ DBG_8192C("%s, set group_key, TKIP\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _TKIP_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ DBG_8192C("%s, set group_key, CCMP\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _AES_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ } ++ else ++ { ++ DBG_8192C("%s, set group_key, none\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ } ++ ++ psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ psecuritypriv->binstallGrpkey = _TRUE; ++ ++ psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!! ++ ++ set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx); ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta) ++ { ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy ++ } ++ ++ } ++ ++ goto exit; ++ ++ } ++ ++ if(psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X && psta) // psk/802_1x ++ { ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) ++ { ++ if(param->u.crypt.set_tx ==1) //pairwise key ++ { ++ _rtw_memcpy(psta->dot118021x_UncstKey.skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ DBG_8192C("%s, set pairwise key, WEP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psta->dot118021XPrivacy = _WEP104_; ++ } ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ DBG_8192C("%s, set pairwise key, TKIP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _TKIP_; ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ ++ DBG_8192C("%s, set pairwise key, CCMP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _AES_; ++ } ++ else ++ { ++ DBG_8192C("%s, set pairwise key, none\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _NO_PRIVACY_; ++ } ++ ++ set_pairwise_key(padapter, psta); ++ ++ psta->ieee8021x_blocked = _FALSE; ++ ++ psta->bpairwise_key_installed = _TRUE; ++ ++ } ++ else//group key??? ++ { ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _TKIP_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _AES_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ } ++ else ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ } ++ ++ psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ psecuritypriv->binstallGrpkey = _TRUE; ++ ++ psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!! ++ ++ set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx); ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta) ++ { ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy ++ } ++ ++ } ++ ++ } ++ ++ } ++ ++exit: ++ ++ return ret; ++ ++} ++#endif ++ ++static int rtw_cfg80211_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len) ++{ ++ int ret = 0; ++ u32 wep_key_idx, wep_key_len,wep_total_len; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ ++_func_enter_; ++ ++ DBG_8192C("%s\n", __func__); ++ ++ param->u.crypt.err = 0; ++ param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0'; ++ ++ if (param_len < (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ if (param->u.crypt.idx >= WEP_KEYS ++#ifdef CONFIG_IEEE80211W ++ && param->u.crypt.idx > BIP_MAX_KEYID ++#endif //CONFIG_IEEE80211W ++ ) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ } else { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("wpa_set_encryption, crypt.alg = WEP\n")); ++ DBG_8192C("wpa_set_encryption, crypt.alg = WEP\n"); ++ ++ wep_key_idx = param->u.crypt.idx; ++ wep_key_len = param->u.crypt.key_len; ++ ++ if ((wep_key_idx > WEP_KEYS) || (wep_key_len <= 0)) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (psecuritypriv->bWepDefaultKeyIdxSet == 0) ++ { ++ //wep default key has not been set, so use this key index as default key. ++ ++ wep_key_len = wep_key_len <= 5 ? 5 : 13; ++ ++ psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ psecuritypriv->dot11PrivacyAlgrthm = _WEP40_; ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ ++ if(wep_key_len==13) ++ { ++ psecuritypriv->dot11PrivacyAlgrthm = _WEP104_; ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ ++ psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx; ++ } ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), param->u.crypt.key, wep_key_len); ++ ++ psecuritypriv->dot11DefKeylen[wep_key_idx] = wep_key_len; ++ ++ rtw_set_key(padapter, psecuritypriv, wep_key_idx, 0); ++ ++ goto exit; ++ } ++ ++ if(padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) // 802_1x ++ { ++ struct sta_info * psta,*pbcmc_sta; ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ ++ //DBG_8192C("%s, : dot11AuthAlgrthm == dot11AuthAlgrthm_8021X \n", __func__); ++ ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_MP_STATE) == _TRUE) //sta mode ++ { ++ psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv)); ++ if (psta == NULL) { ++ //DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n")); ++ DBG_8192C("%s, : Obtain Sta_info fail \n", __func__); ++ } ++ else ++ { ++ //Jeff: don't disable ieee8021x_blocked while clearing key ++ if (strcmp(param->u.crypt.alg, "none") != 0) ++ psta->ieee8021x_blocked = _FALSE; ++ ++ ++ if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)|| ++ (padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption3Enabled)) ++ { ++ psta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm; ++ } ++ ++ if(param->u.crypt.set_tx ==1)//pairwise key ++ { ++ ++ DBG_8192C("%s, : param->u.crypt.set_tx ==1 \n", __func__); ++ ++ _rtw_memcpy(psta->dot118021x_UncstKey.skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ if(strcmp(param->u.crypt.alg, "TKIP") == 0)//set mic key ++ { ++ //DEBUG_ERR(("\nset key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len)); ++ _rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8); ++ ++ padapter->securitypriv.busetkipkey=_FALSE; ++ //_set_timer(&padapter->securitypriv.tkip_timer, 50); ++ } ++ ++ //DEBUG_ERR((" param->u.crypt.key_len=%d\n",param->u.crypt.key_len)); ++ DBG_871X(" ~~~~set sta key:unicastkey\n"); ++ ++ rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE); ++ } ++ else//group key ++ { ++ if(strcmp(param->u.crypt.alg, "TKIP") == 0 || strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[16]),8); ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[24]),8); ++ padapter->securitypriv.binstallGrpkey = _TRUE; ++ //DEBUG_ERR((" param->u.crypt.key_len=%d\n", param->u.crypt.key_len)); ++ DBG_871X(" ~~~~set sta key:groupkey\n"); ++ ++ padapter->securitypriv.dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ rtw_set_key(padapter,&padapter->securitypriv,param->u.crypt.idx, 1); ++ } ++#ifdef CONFIG_IEEE80211W ++ else if(strcmp(param->u.crypt.alg, "BIP") == 0) ++ { ++ int no; ++ //DBG_871X("BIP key_len=%d , index=%d @@@@@@@@@@@@@@@@@@\n", param->u.crypt.key_len, param->u.crypt.idx); ++ //save the IGTK key, length 16 bytes ++ _rtw_memcpy(padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey, param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ /*DBG_871X("IGTK key below:\n"); ++ for(no=0;no<16;no++) ++ printk(" %02x ", padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey[no]); ++ DBG_871X("\n");*/ ++ padapter->securitypriv.dot11wBIPKeyid = param->u.crypt.idx; ++ padapter->securitypriv.binstallBIPkey = _TRUE; ++ DBG_871X(" ~~~~set sta key:IGKT\n"); ++ } ++#endif //CONFIG_IEEE80211W ++ ++#ifdef CONFIG_P2P ++ if(pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING)) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_DONE); ++ } ++ } ++#endif //CONFIG_P2P ++ ++ } ++ } ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta==NULL) ++ { ++ //DEBUG_ERR( ("Set OID_802_11_ADD_KEY: bcmc stainfo is null \n")); ++ } ++ else ++ { ++ //Jeff: don't disable ieee8021x_blocked while clearing key ++ if (strcmp(param->u.crypt.alg, "none") != 0) ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ ++ if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)|| ++ (padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption3Enabled)) ++ { ++ pbcmc_sta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm; ++ } ++ } ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)) //adhoc mode ++ { ++ } ++ } ++ ++exit: ++ ++ DBG_8192C("%s, ret=%d\n", __func__, ret); ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++static int cfg80211_rtw_add_key(struct wiphy *wiphy, struct net_device *ndev, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ u8 key_index, bool pairwise, const u8 *mac_addr, ++#else // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ u8 key_index, const u8 *mac_addr, ++#endif // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ struct key_params *params) ++{ ++ char *alg_name; ++ u32 param_len; ++ struct ieee_param *param = NULL; ++ int ret=0; ++ struct wireless_dev *rtw_wdev = wiphy_to_wdev(wiphy); ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ DBG_871X(FUNC_NDEV_FMT" adding key for %pM\n", FUNC_NDEV_ARG(ndev), mac_addr); ++ DBG_871X("cipher=0x%x\n", params->cipher); ++ DBG_871X("key_len=0x%x\n", params->key_len); ++ DBG_871X("seq_len=0x%x\n", params->seq_len); ++ DBG_871X("key_index=%d\n", key_index); ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ DBG_871X("pairwise=%d\n", pairwise); ++#endif // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ ++ param_len = sizeof(struct ieee_param) + params->key_len; ++ param = (struct ieee_param *)rtw_malloc(param_len); ++ if (param == NULL) ++ return -1; ++ ++ _rtw_memset(param, 0, param_len); ++ ++ param->cmd = IEEE_CMD_SET_ENCRYPTION; ++ _rtw_memset(param->sta_addr, 0xff, ETH_ALEN); ++ ++ switch (params->cipher) { ++ case IW_AUTH_CIPHER_NONE: ++ //todo: remove key ++ //remove = 1; ++ alg_name = "none"; ++ break; ++ case WLAN_CIPHER_SUITE_WEP40: ++ case WLAN_CIPHER_SUITE_WEP104: ++ alg_name = "WEP"; ++ break; ++ case WLAN_CIPHER_SUITE_TKIP: ++ alg_name = "TKIP"; ++ break; ++ case WLAN_CIPHER_SUITE_CCMP: ++ alg_name = "CCMP"; ++ break; ++#ifdef CONFIG_IEEE80211W ++ case WLAN_CIPHER_SUITE_AES_CMAC: ++ alg_name = "BIP"; ++ break; ++#endif //CONFIG_IEEE80211W ++ default: ++ return -ENOTSUPP; ++ } ++ ++ strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN); ++ ++ ++ if (!mac_addr || is_broadcast_ether_addr(mac_addr)) ++ { ++ param->u.crypt.set_tx = 0; //for wpa/wpa2 group key ++ } else { ++ param->u.crypt.set_tx = 1; //for wpa/wpa2 pairwise key ++ } ++ ++ ++ //param->u.crypt.idx = key_index - 1; ++ param->u.crypt.idx = key_index; ++ ++ if (params->seq_len && params->seq) ++ { ++ _rtw_memcpy(param->u.crypt.seq, params->seq, params->seq_len); ++ } ++ ++ if(params->key_len && params->key) ++ { ++ param->u.crypt.key_len = params->key_len; ++ _rtw_memcpy(param->u.crypt.key, params->key, params->key_len); ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ ret = rtw_cfg80211_set_encryption(ndev, param, param_len); ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++#ifdef CONFIG_AP_MODE ++ if(mac_addr) ++ _rtw_memcpy(param->sta_addr, (void*)mac_addr, ETH_ALEN); ++ ++ ret = rtw_cfg80211_ap_set_encryption(ndev, param, param_len); ++#endif ++ } ++ else ++ { ++ DBG_8192C("error! fw_state=0x%x, iftype=%d\n", pmlmepriv->fw_state, rtw_wdev->iftype); ++ ++ } ++ ++ if(param) ++ { ++ rtw_mfree((u8*)param, param_len); ++ } ++ ++ return ret; ++ ++} ++ ++static int cfg80211_rtw_get_key(struct wiphy *wiphy, struct net_device *ndev, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ u8 key_index, bool pairwise, const u8 *mac_addr, ++#else // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ u8 key_index, const u8 *mac_addr, ++#endif // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ void *cookie, ++ void (*callback)(void *cookie, ++ struct key_params*)) ++{ ++#if 0 ++ struct iwm_priv *iwm = ndev_to_iwm(ndev); ++ struct iwm_key *key = &iwm->keys[key_index]; ++ struct key_params params; ++ ++ IWM_DBG_WEXT(iwm, DBG, "Getting key %d\n", key_index); ++ ++ memset(¶ms, 0, sizeof(params)); ++ ++ params.cipher = key->cipher; ++ params.key_len = key->key_len; ++ params.seq_len = key->seq_len; ++ params.seq = key->seq; ++ params.key = key->key; ++ ++ callback(cookie, ¶ms); ++ ++ return key->key_len ? 0 : -ENOENT; ++#endif ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ return 0; ++} ++ ++static int cfg80211_rtw_del_key(struct wiphy *wiphy, struct net_device *ndev, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ u8 key_index, bool pairwise, const u8 *mac_addr) ++#else // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ u8 key_index, const u8 *mac_addr) ++#endif // (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ DBG_871X(FUNC_NDEV_FMT" key_index=%d\n", FUNC_NDEV_ARG(ndev), key_index); ++ ++ if (key_index == psecuritypriv->dot11PrivacyKeyIndex) ++ { ++ //clear the flag of wep default key set. ++ psecuritypriv->bWepDefaultKeyIdxSet = 0; ++ } ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_set_default_key(struct wiphy *wiphy, ++ struct net_device *ndev, u8 key_index ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ , bool unicast, bool multicast ++ #endif ++ ) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ DBG_871X(FUNC_NDEV_FMT" key_index=%d" ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ ", unicast=%d, multicast=%d" ++ #endif ++ ".\n", FUNC_NDEV_ARG(ndev), key_index ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ , unicast, multicast ++ #endif ++ ); ++ ++ if ((key_index < WEP_KEYS) && ((psecuritypriv->dot11PrivacyAlgrthm == _WEP40_) || (psecuritypriv->dot11PrivacyAlgrthm == _WEP104_))) //set wep default key ++ { ++ psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ ++ psecuritypriv->dot11PrivacyKeyIndex = key_index; ++ ++ psecuritypriv->dot11PrivacyAlgrthm = _WEP40_; ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ if (psecuritypriv->dot11DefKeylen[key_index] == 13) ++ { ++ psecuritypriv->dot11PrivacyAlgrthm = _WEP104_; ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ ++ psecuritypriv->bWepDefaultKeyIdxSet = 1; //set the flag to represent that wep default key has been set ++ } ++ ++ return 0; ++ ++} ++ ++static int cfg80211_rtw_get_station(struct wiphy *wiphy, ++ struct net_device *ndev, ++ u8 *mac, struct station_info *sinfo) ++{ ++ int ret = 0; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ sinfo->filled = 0; ++ ++ if (!mac) { ++ DBG_871X(FUNC_NDEV_FMT" mac==%p\n", FUNC_NDEV_ARG(ndev), mac); ++ ret = -ENOENT; ++ goto exit; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, mac); ++ if (psta == NULL) { ++ DBG_8192C("%s, sta_info is null\n", __func__); ++ ret = -ENOENT; ++ goto exit; ++ } ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X(FUNC_NDEV_FMT" mac="MAC_FMT"\n", FUNC_NDEV_ARG(ndev), MAC_ARG(mac)); ++#endif ++ ++ //for infra./P2PClient mode ++ if( check_fwstate(pmlmepriv, WIFI_STATION_STATE) ++ && check_fwstate(pmlmepriv, _FW_LINKED) ++ ) ++ { ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ ++ if (_rtw_memcmp(mac, cur_network->network.MacAddress, ETH_ALEN) == _FALSE) { ++ DBG_871X("%s, mismatch bssid="MAC_FMT"\n", __func__, MAC_ARG(cur_network->network.MacAddress)); ++ ret = -ENOENT; ++ goto exit; ++ } ++ ++ sinfo->filled |= STATION_INFO_SIGNAL; ++ sinfo->signal = translate_percentage_to_dbm(padapter->recvpriv.signal_strength); ++ ++ sinfo->filled |= STATION_INFO_TX_BITRATE; ++ sinfo->txrate.legacy = rtw_get_cur_max_rate(padapter); ++ ++ sinfo->filled |= STATION_INFO_RX_PACKETS; ++ sinfo->rx_packets = sta_rx_data_pkts(psta); ++ ++ sinfo->filled |= STATION_INFO_TX_PACKETS; ++ sinfo->tx_packets = psta->sta_stats.tx_pkts; ++ ++ } ++ ++ //for Ad-Hoc/AP mode ++ if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ++ ||check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) ++ ||check_fwstate(pmlmepriv, WIFI_AP_STATE)) ++ && check_fwstate(pmlmepriv, _FW_LINKED) ++ ) ++ { ++ //TODO: should acquire station info... ++ } ++ ++exit: ++ return ret; ++} ++ ++extern int netdev_open(struct net_device *pnetdev); ++#ifdef CONFIG_CONCURRENT_MODE ++extern int netdev_if2_open(struct net_device *pnetdev); ++#endif ++ ++/* ++enum nl80211_iftype { ++ NL80211_IFTYPE_UNSPECIFIED, ++ NL80211_IFTYPE_ADHOC, //1 ++ NL80211_IFTYPE_STATION, //2 ++ NL80211_IFTYPE_AP, //3 ++ NL80211_IFTYPE_AP_VLAN, ++ NL80211_IFTYPE_WDS, ++ NL80211_IFTYPE_MONITOR, //6 ++ NL80211_IFTYPE_MESH_POINT, ++ NL80211_IFTYPE_P2P_CLIENT, //8 ++ NL80211_IFTYPE_P2P_GO, //9 ++ //keep last ++ NUM_NL80211_IFTYPES, ++ NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 ++}; ++*/ ++static int cfg80211_rtw_change_iface(struct wiphy *wiphy, ++ struct net_device *ndev, ++ enum nl80211_iftype type, u32 *flags, ++ struct vif_params *params) ++{ ++ enum nl80211_iftype old_type; ++ NDIS_802_11_NETWORK_INFRASTRUCTURE networkType ; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct wireless_dev *rtw_wdev = wiphy_to_wdev(wiphy); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _queue *queue = &pmlmepriv->scanned_queue; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif ++ int ret = 0; ++ u8 change = _FALSE; ++ ++ if (adapter_to_dvobj(padapter)->processing_dev_remove == _TRUE) { ++ ret= -EPERM; ++ goto exit; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->adapter_type == SECONDARY_ADAPTER) ++ { ++ DBG_871X(FUNC_NDEV_FMT" call netdev_if2_open\n", FUNC_NDEV_ARG(ndev)); ++ if(netdev_if2_open(ndev) != 0) { ++ ret= -EPERM; ++ goto exit; ++ } ++ } ++ else if(padapter->adapter_type == PRIMARY_ADAPTER) ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ DBG_871X(FUNC_NDEV_FMT" call netdev_open\n", FUNC_NDEV_ARG(ndev)); ++ if(netdev_open(ndev) != 0) { ++ ret= -EPERM; ++ goto exit; ++ } ++ } ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret= -EPERM; ++ goto exit; ++ } ++ ++ old_type = rtw_wdev->iftype; ++ DBG_871X(FUNC_NDEV_FMT" old_iftype=%d, new_iftype=%d\n", ++ FUNC_NDEV_ARG(ndev), old_type, type); ++ ++ if(old_type != type) ++ { ++ change = _TRUE; ++ pmlmeext->action_public_rxseq = 0xffff; ++ pmlmeext->action_public_dialog_token = 0xff; ++ } ++ ++ switch (type) { ++ case NL80211_IFTYPE_ADHOC: ++ networkType = Ndis802_11IBSS; ++ break; ++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)) ++ case NL80211_IFTYPE_P2P_CLIENT: ++#endif ++ case NL80211_IFTYPE_STATION: ++ networkType = Ndis802_11Infrastructure; ++ #ifdef CONFIG_P2P ++ if(pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(change && rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++ ++ //it means remove GO and change mode from AP(GO) to station(P2P DEVICE) ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE); ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++ ++ DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo)); ++ } ++ } ++ #endif //CONFIG_P2P ++ break; ++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)) ++ case NL80211_IFTYPE_P2P_GO: ++#endif ++ case NL80211_IFTYPE_AP: ++ networkType = Ndis802_11APMode; ++ #ifdef CONFIG_P2P ++ if(pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(change && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ //it means P2P Group created, we will be GO and change mode from P2P DEVICE to AP(GO) ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ } ++ } ++ #endif //CONFIG_P2P ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ rtw_wdev->iftype = type; ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _enter_critical_bh(&queue->lock, &irqL); ++ ++ if (rtw_set_802_11_infrastructure_mode(padapter, networkType) ==_FALSE) ++ { ++ rtw_wdev->iftype = old_type; ++ ret = -EPERM; ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ goto exit; ++ } ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ rtw_setopmode_cmd(padapter, networkType); ++ ++exit: ++ ++ return ret; ++} ++ ++void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, bool aborted) ++{ ++ _irqL irqL; ++ ++ _enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++ if(pwdev_priv->scan_request != NULL) ++ { ++ //struct cfg80211_scan_request *scan_request = pwdev_priv->scan_request; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("%s with scan req\n", __FUNCTION__); ++ #endif ++ ++ //avoid WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req); ++ //if(scan_request == wiphy_to_dev(scan_request->wiphy)->scan_req) ++ if(pwdev_priv->scan_request->wiphy != pwdev_priv->rtw_wdev->wiphy) ++ { ++ DBG_8192C("error wiphy compare\n"); ++ } ++ else ++ { ++ cfg80211_scan_done(pwdev_priv->scan_request, aborted); ++ } ++ ++ pwdev_priv->scan_request = NULL; ++ ++ } else { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("%s without scan req\n", __FUNCTION__); ++ #endif ++ } ++ _exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++} ++ ++void rtw_cfg80211_surveydone_event_callback(_adapter *padapter) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u32 cnt=0; ++ u32 wait_for_surveydone; ++ sint wait_status; ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s\n", __func__); ++#endif ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ //report network only if the current channel set contains the channel to which this network belongs ++ if(rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, pnetwork->network.Configuration.DSConfig) >= 0 ++ && rtw_mlme_band_check(padapter, pnetwork->network.Configuration.DSConfig) == _TRUE ++ && _TRUE == rtw_validate_ssid(&(pnetwork->network.Ssid)) ++ ) ++ { ++ //ev=translate_scan(padapter, a, pnetwork, ev, stop); ++ rtw_cfg80211_inform_bss(padapter, pnetwork); ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ //call this after other things have been done ++ rtw_cfg80211_indicate_scan_done(wdev_to_priv(padapter->rtw_wdev), _FALSE); ++} ++ ++static int rtw_cfg80211_set_probe_req_wpsp2pie(_adapter *padapter, char *buf, int len) ++{ ++ int ret = 0; ++ uint wps_ielen = 0; ++ u8 *wps_ie; ++ u32 p2p_ielen = 0; ++ u8 *p2p_ie; ++ u32 wfd_ielen = 0; ++ u8 *wfd_ie; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ielen=%d\n", __func__, len); ++#endif ++ ++ if(len>0) ++ { ++ if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen))) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_req_wps_ielen=%d\n", wps_ielen); ++ #endif ++ ++ if(pmlmepriv->wps_probe_req_ie) ++ { ++ u32 free_len = pmlmepriv->wps_probe_req_ie_len; ++ pmlmepriv->wps_probe_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len); ++ pmlmepriv->wps_probe_req_ie = NULL; ++ } ++ ++ pmlmepriv->wps_probe_req_ie = rtw_malloc(wps_ielen); ++ if ( pmlmepriv->wps_probe_req_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ _rtw_memcpy(pmlmepriv->wps_probe_req_ie, wps_ie, wps_ielen); ++ pmlmepriv->wps_probe_req_ie_len = wps_ielen; ++ } ++ ++ //buf += wps_ielen; ++ //len -= wps_ielen; ++ ++ #ifdef CONFIG_P2P ++ if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen))) ++ { ++ struct wifidirect_info *wdinfo = &padapter->wdinfo; ++ u32 attr_contentlen = 0; ++ u8 listen_ch_attr[5]; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_req_p2p_ielen=%d\n", p2p_ielen); ++ #endif ++ ++ if(pmlmepriv->p2p_probe_req_ie) ++ { ++ u32 free_len = pmlmepriv->p2p_probe_req_ie_len; ++ pmlmepriv->p2p_probe_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->p2p_probe_req_ie, free_len); ++ pmlmepriv->p2p_probe_req_ie = NULL; ++ } ++ ++ pmlmepriv->p2p_probe_req_ie = rtw_malloc(p2p_ielen); ++ if ( pmlmepriv->p2p_probe_req_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ _rtw_memcpy(pmlmepriv->p2p_probe_req_ie, p2p_ie, p2p_ielen); ++ pmlmepriv->p2p_probe_req_ie_len = p2p_ielen; ++ ++ if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_LISTEN_CH, (u8*)listen_ch_attr, (uint*) &attr_contentlen) ++ && attr_contentlen == 5) ++ { ++ if (wdinfo->listen_channel != listen_ch_attr[4]) { ++ DBG_871X(FUNC_ADPT_FMT" listen channel - country:%c%c%c, class:%u, ch:%u\n", ++ FUNC_ADPT_ARG(padapter), listen_ch_attr[0], listen_ch_attr[1], listen_ch_attr[2], ++ listen_ch_attr[3], listen_ch_attr[4]); ++ wdinfo->listen_channel = listen_ch_attr[4]; ++ } ++ } ++ } ++ #endif //CONFIG_P2P ++ ++ //buf += p2p_ielen; ++ //len -= p2p_ielen; ++ ++ #ifdef CONFIG_WFD ++ if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_req_wfd_ielen=%d\n", wfd_ielen); ++ #endif ++ ++ if(pmlmepriv->wfd_probe_req_ie) ++ { ++ u32 free_len = pmlmepriv->wfd_probe_req_ie_len; ++ pmlmepriv->wfd_probe_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->wfd_probe_req_ie, free_len); ++ pmlmepriv->wfd_probe_req_ie = NULL; ++ } ++ ++ pmlmepriv->wfd_probe_req_ie = rtw_malloc(wfd_ielen); ++ if ( pmlmepriv->wfd_probe_req_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_probe_req_ie, &pmlmepriv->wfd_probe_req_ie_len); ++ } ++ #endif //CONFIG_WFD ++ ++ } ++ ++ return ret; ++ ++} ++ ++static int cfg80211_rtw_scan(struct wiphy *wiphy ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0)) ++ , struct net_device *ndev ++ #endif ++ , struct cfg80211_scan_request *request) ++{ ++ int i; ++ u8 _status = _FALSE; ++ int ret = 0; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_priv *pmlmepriv= &padapter->mlmepriv; ++ NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT]; ++ struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT]; ++ _irqL irqL; ++ u8 *wps_ie=NULL; ++ uint wps_ielen=0; ++ u8 *p2p_ie=NULL; ++ uint p2p_ielen=0; ++ u8 survey_times=3; ++ u8 survey_times_for_one_ch=6; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ struct cfg80211_ssid *ssids = request->ssids; ++ int social_channel = 0, j = 0; ++ bool need_indicate_scan_done = _FALSE; ++#ifdef CONFIG_CONCURRENT_MODE ++ PADAPTER pbuddy_adapter = NULL; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++#endif //CONFIG_CONCURRENT_MODE ++ ++//#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++//#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->pbuddy_adapter) { ++ pbuddy_adapter = padapter->pbuddy_adapter; ++ pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_MP_INCLUDED ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ { ++ ret = -EPERM; ++ goto exit; ++ } ++#endif ++ ++ _enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++ pwdev_priv->scan_request = request; ++ _exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL); ++ ++ if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X("%s under WIFI_AP_STATE\n", __FUNCTION__); ++#endif ++ ++ if (check_fwstate(pmlmepriv, WIFI_UNDER_WPS|_FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ DBG_8192C("%s, fwstate=0x%x\n", __func__, pmlmepriv->fw_state); ++ ++ if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) ++ { ++ DBG_8192C("AP mode process WPS \n"); ++ } ++ ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++ } ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++ ++ #ifdef CONFIG_P2P ++ if( pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(ssids->ssid != NULL ++ && _rtw_memcmp(ssids->ssid, "DIRECT-", 7) ++ && rtw_get_p2p_ie((u8 *)request->ie, request->ie_len, NULL, NULL) ++ ) ++ { ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ u32 initialgain = 0x30; ++ rtw_p2p_enable(padapter, P2P_ROLE_DEVICE); ++ wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _TRUE; ++ padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_INITIAL_GAIN, (u8 *)&(initialgain)); ++ padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_INITIAL_GAIN, (u8 *)&(initialgain)); ++ } ++ else ++ { ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo)); ++ #endif ++ } ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN); ++ ++ if(request->n_channels == 3 && ++ request->channels[0]->hw_value == 1 && ++ request->channels[1]->hw_value == 6 && ++ request->channels[2]->hw_value == 11 ++ ) ++ { ++ social_channel = 1; ++ } ++ } ++ } ++ #endif //CONFIG_P2P ++ ++ if(request->ie && request->ie_len>0) ++ { ++ rtw_cfg80211_set_probe_req_wpsp2pie(padapter, (u8 *)request->ie, request->ie_len ); ++ } ++ ++ if (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE) ++ { ++ DBG_8192C("%s, bBusyTraffic == _TRUE\n", __func__); ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++ if (rtw_is_scan_deny(padapter)){ ++ DBG_871X(FUNC_ADPT_FMT ": scan deny\n", FUNC_ADPT_ARG(padapter)); ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pbuddy_mlmepriv && (pbuddy_mlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE)) ++ { ++ DBG_8192C("%s, bBusyTraffic == _TRUE at buddy_intf\n", __func__); ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++#endif //CONFIG_CONCURRENT_MODE ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ DBG_8192C("%s, fwstate=0x%x\n", __func__, pmlmepriv->fw_state); ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, ++ _FW_UNDER_SURVEY|_FW_UNDER_LINKING|WIFI_UNDER_WPS) == _TRUE) ++ { ++ if(check_buddy_fwstate(padapter, _FW_UNDER_SURVEY)) ++ { ++ DBG_8192C("scanning_via_buddy_intf\n"); ++ pmlmepriv->scanning_via_buddy_intf = _TRUE; ++ } ++ ++ DBG_8192C("buddy_intf's mlme state:0x%x\n", pbuddy_mlmepriv->fw_state); ++ ++ need_indicate_scan_done = _TRUE; ++ goto check_need_indicate_scan_done; ++ } ++#endif ++ ++ ++#ifdef CONFIG_P2P ++ if( pwdinfo->driver_interface == DRIVER_CFG80211 ) ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH); ++ rtw_free_network_queue(padapter, _TRUE); ++ ++ if(social_channel == 0) ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE); ++ else ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_SOCIAL_LAST); ++ } ++ } ++#endif //CONFIG_P2P ++ ++ ++ _rtw_memset(ssid, 0, sizeof(NDIS_802_11_SSID)*RTW_SSID_SCAN_AMOUNT); ++ //parsing request ssids, n_ssids ++ for (i = 0; i < request->n_ssids && i < RTW_SSID_SCAN_AMOUNT; i++) { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("ssid=%s, len=%d\n", ssids[i].ssid, ssids[i].ssid_len); ++ #endif ++ _rtw_memcpy(ssid[i].Ssid, ssids[i].ssid, ssids[i].ssid_len); ++ ssid[i].SsidLength = ssids[i].ssid_len; ++ } ++ ++ ++ /* parsing channels, n_channels */ ++ _rtw_memset(ch, 0, sizeof(struct rtw_ieee80211_channel)*RTW_CHANNEL_SCAN_AMOUNT); ++ for (i=0;in_channels && ichannels[i])); ++ #endif ++ ch[i].hw_value = request->channels[i]->hw_value; ++ ch[i].flags = request->channels[i]->flags; ++ } ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ if (request->n_channels == 1) { ++ for(i=1;in_channels == 2) { ++ _rtw_memcpy(&ch[3], &ch[1], sizeof(struct rtw_ieee80211_channel)); ++ for(i=1;ilock, &irqL); ++ ++ ++ if(_status == _FALSE) ++ { ++ ret = -1; ++ } ++ ++check_need_indicate_scan_done: ++ if(need_indicate_scan_done) ++ rtw_cfg80211_surveydone_event_callback(padapter); ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int cfg80211_rtw_set_wiphy_params(struct wiphy *wiphy, u32 changed) ++{ ++#if 0 ++ struct iwm_priv *iwm = wiphy_to_iwm(wiphy); ++ ++ if (changed & WIPHY_PARAM_RTS_THRESHOLD && ++ (iwm->conf.rts_threshold != wiphy->rts_threshold)) { ++ int ret; ++ ++ iwm->conf.rts_threshold = wiphy->rts_threshold; ++ ++ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, ++ CFG_RTS_THRESHOLD, ++ iwm->conf.rts_threshold); ++ if (ret < 0) ++ return ret; ++ } ++ ++ if (changed & WIPHY_PARAM_FRAG_THRESHOLD && ++ (iwm->conf.frag_threshold != wiphy->frag_threshold)) { ++ int ret; ++ ++ iwm->conf.frag_threshold = wiphy->frag_threshold; ++ ++ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX, ++ CFG_FRAG_THRESHOLD, ++ iwm->conf.frag_threshold); ++ if (ret < 0) ++ return ret; ++ } ++#endif ++ DBG_8192C("%s\n", __func__); ++ return 0; ++} ++ ++static int cfg80211_rtw_join_ibss(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_ibss_params *params) ++{ ++#if 0 ++ struct iwm_priv *iwm = wiphy_to_iwm(wiphy); ++ struct ieee80211_channel *chan = params->channel; ++ ++ if (!test_bit(IWM_STATUS_READY, &iwm->status)) ++ return -EIO; ++ ++ /* UMAC doesn't support creating or joining an IBSS network ++ * with specified bssid. */ ++ if (params->bssid) ++ return -EOPNOTSUPP; ++ ++ iwm->channel = ieee80211_frequency_to_channel(chan->center_freq); ++ iwm->umac_profile->ibss.band = chan->band; ++ iwm->umac_profile->ibss.channel = iwm->channel; ++ iwm->umac_profile->ssid.ssid_len = params->ssid_len; ++ memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len); ++ ++ return iwm_send_mlme_profile(iwm); ++#endif ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ return 0; ++} ++ ++static int cfg80211_rtw_leave_ibss(struct wiphy *wiphy, struct net_device *ndev) ++{ ++#if 0 ++ struct iwm_priv *iwm = wiphy_to_iwm(wiphy); ++ ++ if (iwm->umac_profile_active) ++ return iwm_invalidate_mlme_profile(iwm); ++#endif ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ return 0; ++} ++ ++static int rtw_cfg80211_set_wpa_version(struct security_priv *psecuritypriv, u32 wpa_version) ++{ ++ DBG_8192C("%s, wpa_version=%d\n", __func__, wpa_version); ++ ++ if (!wpa_version) { ++ psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen; ++ return 0; ++ } ++ ++ ++ if (wpa_version & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2)) ++ { ++ psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPAPSK; ++ } ++ ++/* ++ if (wpa_version & NL80211_WPA_VERSION_2) ++ { ++ psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPA2PSK; ++ } ++*/ ++ ++ return 0; ++ ++} ++ ++static int rtw_cfg80211_set_auth_type(struct security_priv *psecuritypriv, ++ enum nl80211_auth_type sme_auth_type) ++{ ++ DBG_8192C("%s, nl80211_auth_type=%d\n", __func__, sme_auth_type); ++ ++ ++ switch (sme_auth_type) { ++ case NL80211_AUTHTYPE_AUTOMATIC: ++ ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++ ++ break; ++ case NL80211_AUTHTYPE_OPEN_SYSTEM: ++ ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; ++ ++ if(psecuritypriv->ndisauthtype>Ndis802_11AuthModeWPA) ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X; ++ ++ break; ++ case NL80211_AUTHTYPE_SHARED_KEY: ++ ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Shared; ++ ++ psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ ++ ++ break; ++ default: ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; ++ //return -ENOTSUPP; ++ } ++ ++ return 0; ++ ++} ++ ++static int rtw_cfg80211_set_cipher(struct security_priv *psecuritypriv, u32 cipher, bool ucast) ++{ ++ u32 ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ ++ u32 *profile_cipher = ucast ? &psecuritypriv->dot11PrivacyAlgrthm : ++ &psecuritypriv->dot118021XGrpPrivacy; ++ ++ DBG_8192C("%s, ucast=%d, cipher=0x%x\n", __func__, ucast, cipher); ++ ++ ++ if (!cipher) { ++ *profile_cipher = _NO_PRIVACY_; ++ psecuritypriv->ndisencryptstatus = ndisencryptstatus; ++ return 0; ++ } ++ ++ switch (cipher) { ++ case IW_AUTH_CIPHER_NONE: ++ *profile_cipher = _NO_PRIVACY_; ++ ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ break; ++ case WLAN_CIPHER_SUITE_WEP40: ++ *profile_cipher = _WEP40_; ++ ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WLAN_CIPHER_SUITE_WEP104: ++ *profile_cipher = _WEP104_; ++ ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WLAN_CIPHER_SUITE_TKIP: ++ *profile_cipher = _TKIP_; ++ ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case WLAN_CIPHER_SUITE_CCMP: ++ *profile_cipher = _AES_; ++ ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ default: ++ DBG_8192C("Unsupported cipher: 0x%x\n", cipher); ++ return -ENOTSUPP; ++ } ++ ++ if(ucast) ++ { ++ psecuritypriv->ndisencryptstatus = ndisencryptstatus; ++ ++ //if(psecuritypriv->dot11PrivacyAlgrthm >= _AES_) ++ // psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPA2PSK; ++ } ++ ++ return 0; ++} ++ ++static int rtw_cfg80211_set_key_mgt(struct security_priv *psecuritypriv, u32 key_mgt) ++{ ++ DBG_8192C("%s, key_mgt=0x%x\n", __func__, key_mgt); ++ ++ if (key_mgt == WLAN_AKM_SUITE_8021X) ++ //*auth_type = UMAC_AUTH_TYPE_8021X; ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X; ++ else if (key_mgt == WLAN_AKM_SUITE_PSK) { ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X; ++ } else { ++ DBG_8192C("Invalid key mgt: 0x%x\n", key_mgt); ++ //return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int rtw_cfg80211_set_wpa_ie(_adapter *padapter, u8 *pie, size_t ielen) ++{ ++ u8 *buf=NULL, *pos=NULL; ++ u32 left; ++ int group_cipher = 0, pairwise_cipher = 0; ++ int ret = 0; ++ int wpa_ielen=0; ++ int wpa2_ielen=0; ++ u8 *pwpa, *pwpa2; ++ u8 null_addr[]= {0,0,0,0,0,0}; ++ ++ if (pie == NULL || !ielen) { ++ /* Treat this as normal case, but need to clear WIFI_UNDER_WPS */ ++ _clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ goto exit; ++ } ++ ++ if (ielen > MAX_WPA_IE_LEN+MAX_WPS_IE_LEN+MAX_P2P_IE_LEN) { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ buf = rtw_zmalloc(ielen); ++ if (buf == NULL){ ++ ret = -ENOMEM; ++ goto exit; ++ } ++ ++ _rtw_memcpy(buf, pie , ielen); ++ ++ //dump ++ { ++ int i; ++ DBG_8192C("set wpa_ie(length:%zu):\n", ielen); ++ for(i=0;i0) ++ { ++ if(rtw_parse_wpa_ie(pwpa, wpa_ielen+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPAPSK; ++ _rtw_memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen+2); ++ ++ DBG_8192C("got wpa_ie, wpa_ielen:%u\n", wpa_ielen); ++ } ++ } ++ ++ pwpa2 = rtw_get_wpa2_ie(buf, &wpa2_ielen, ielen); ++ if(pwpa2 && wpa2_ielen>0) ++ { ++ if(rtw_parse_wpa2_ie(pwpa2, wpa2_ielen+2, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPA2PSK; ++ _rtw_memcpy(padapter->securitypriv.supplicant_ie, &pwpa2[0], wpa2_ielen+2); ++ ++ DBG_8192C("got wpa2_ie, wpa2_ielen:%u\n", wpa2_ielen); ++ } ++ } ++ ++ if (group_cipher == 0) ++ { ++ group_cipher = WPA_CIPHER_NONE; ++ } ++ if (pairwise_cipher == 0) ++ { ++ pairwise_cipher = WPA_CIPHER_NONE; ++ } ++ ++ switch(group_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled; ++ break; ++ case WPA_CIPHER_WEP40: ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WPA_CIPHER_TKIP: ++ padapter->securitypriv.dot118021XGrpPrivacy=_TKIP_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case WPA_CIPHER_CCMP: ++ padapter->securitypriv.dot118021XGrpPrivacy=_AES_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ case WPA_CIPHER_WEP104: ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ } ++ ++ switch(pairwise_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled; ++ break; ++ case WPA_CIPHER_WEP40: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WPA_CIPHER_TKIP: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_TKIP_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case WPA_CIPHER_CCMP: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_AES_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ case WPA_CIPHER_WEP104: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ } ++ ++ {/* handle wps_ie */ ++ uint wps_ielen; ++ u8 *wps_ie; ++ ++ wps_ie = rtw_get_wps_ie(buf, ielen, NULL, &wps_ielen); ++ if (wps_ie && wps_ielen > 0) { ++ DBG_8192C("got wps_ie, wps_ielen:%u\n", wps_ielen); ++ padapter->securitypriv.wps_ie_len = wps_ielensecuritypriv.wps_ie, wps_ie, padapter->securitypriv.wps_ie_len); ++ set_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ } else { ++ _clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ } ++ } ++ ++ #ifdef CONFIG_P2P ++ {//check p2p_ie for assoc req; ++ uint p2p_ielen=0; ++ u8 *p2p_ie; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if((p2p_ie=rtw_get_p2p_ie(buf, ielen, NULL, &p2p_ielen))) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s p2p_assoc_req_ielen=%d\n", __FUNCTION__, p2p_ielen); ++ #endif ++ ++ if(pmlmepriv->p2p_assoc_req_ie) ++ { ++ u32 free_len = pmlmepriv->p2p_assoc_req_ie_len; ++ pmlmepriv->p2p_assoc_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->p2p_assoc_req_ie, free_len); ++ pmlmepriv->p2p_assoc_req_ie = NULL; ++ } ++ ++ pmlmepriv->p2p_assoc_req_ie = rtw_malloc(p2p_ielen); ++ if ( pmlmepriv->p2p_assoc_req_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ goto exit; ++ } ++ _rtw_memcpy(pmlmepriv->p2p_assoc_req_ie, p2p_ie, p2p_ielen); ++ pmlmepriv->p2p_assoc_req_ie_len = p2p_ielen; ++ } ++ } ++ #endif //CONFIG_P2P ++ ++ #ifdef CONFIG_WFD ++ {//check wfd_ie for assoc req; ++ uint wfd_ielen=0; ++ u8 *wfd_ie; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if(rtw_get_wfd_ie(buf, ielen, NULL, &wfd_ielen)) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s wfd_assoc_req_ielen=%d\n", __FUNCTION__, wfd_ielen); ++ #endif ++ ++ if(pmlmepriv->wfd_assoc_req_ie) ++ { ++ u32 free_len = pmlmepriv->wfd_assoc_req_ie_len; ++ pmlmepriv->wfd_assoc_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->wfd_assoc_req_ie, free_len); ++ pmlmepriv->wfd_assoc_req_ie = NULL; ++ } ++ ++ pmlmepriv->wfd_assoc_req_ie = rtw_malloc(wfd_ielen); ++ if ( pmlmepriv->wfd_assoc_req_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ goto exit; ++ } ++ rtw_get_wfd_ie(buf, ielen, pmlmepriv->wfd_assoc_req_ie, &pmlmepriv->wfd_assoc_req_ie_len); ++ } ++ } ++ #endif //CONFIG_WFD ++ ++ //TKIP and AES disallow multicast packets until installing group key ++ if(padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_ ++ || padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_WTMIC_ ++ || padapter->securitypriv.dot11PrivacyAlgrthm == _AES_) ++ //WPS open need to enable multicast ++ //|| check_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS) == _TRUE) ++ rtw_hal_set_hwreg(padapter, HW_VAR_OFF_RCR_AM, null_addr); ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("rtw_set_wpa_ie: pairwise_cipher=0x%08x padapter->securitypriv.ndisencryptstatus=%d padapter->securitypriv.ndisauthtype=%d\n", ++ pairwise_cipher, padapter->securitypriv.ndisencryptstatus, padapter->securitypriv.ndisauthtype)); ++ ++exit: ++ if (buf) ++ rtw_mfree(buf, ielen); ++ if (ret) ++ _clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ return ret; ++} ++ ++static int cfg80211_rtw_connect(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_connect_params *sme) ++{ ++ int ret=0; ++ _irqL irqL; ++ _list *phead; ++ struct wlan_network *pnetwork = NULL; ++ NDIS_802_11_AUTHENTICATION_MODE authmode; ++ NDIS_802_11_SSID ndis_ssid; ++ u8 *dst_ssid, *src_ssid; ++ u8 *dst_bssid, *src_bssid; ++ //u8 matched_by_bssid=_FALSE; ++ //u8 matched_by_ssid=_FALSE; ++ u8 matched=_FALSE; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ _queue *queue = &pmlmepriv->scanned_queue; ++ ++ DBG_871X("=>"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ DBG_871X("privacy=%d, key=%p, key_len=%d, key_idx=%d\n", ++ sme->privacy, sme->key, sme->key_len, sme->key_idx); ++ ++ ++ if(wdev_to_priv(padapter->rtw_wdev)->block == _TRUE) ++ { ++ ret = -EBUSY; ++ DBG_871X("%s wdev_priv.block is set\n", __FUNCTION__); ++ goto exit; ++ } ++ ++#ifdef CONFIG_PLATFORM_MSTAR ++ printk("MStar Android!\n"); ++ if((wdev_to_priv(padapter->rtw_wdev))->bandroid_scan == _FALSE) ++ { ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++#endif //CONFIG_P2P ++ { ++ ret = -EBUSY; ++ printk("Android hasn't attached yet!\n"); ++ goto exit; ++ } ++ } ++#endif ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret= -EPERM; ++ goto exit; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) { ++ ret = -EPERM; ++ goto exit; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, _FW_UNDER_LINKING) == _TRUE) { ++ DBG_8192C("%s, but buddy_intf is under linking\n", __FUNCTION__); ++ ret = -EINVAL; ++ goto exit; ++ } ++ if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY) == _TRUE) { ++ rtw_scan_abort(padapter->pbuddy_adapter); ++ } ++#endif ++ ++ if (!sme->ssid || !sme->ssid_len) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (sme->ssid_len > IW_ESSID_MAX_SIZE){ ++ ++ ret= -E2BIG; ++ goto exit; ++ } ++ ++ _rtw_memset(&ndis_ssid, 0, sizeof(NDIS_802_11_SSID)); ++ ndis_ssid.SsidLength = sme->ssid_len; ++ _rtw_memcpy(ndis_ssid.Ssid, sme->ssid, sme->ssid_len); ++ ++ DBG_8192C("ssid=%s, len=%zu\n", ndis_ssid.Ssid, sme->ssid_len); ++ ++ ++ if (sme->bssid) ++ DBG_8192C("bssid="MAC_FMT"\n", MAC_ARG(sme->bssid)); ++ ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) { ++ ret = -EBUSY; ++ DBG_8192C("%s, fw_state=0x%x, goto exit\n", __FUNCTION__, pmlmepriv->fw_state); ++ goto exit; ++ } ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) { ++ rtw_scan_abort(padapter); ++ } ++ ++ psecuritypriv->ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ psecuritypriv->dot11PrivacyAlgrthm = _NO_PRIVACY_; ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; //open system ++ psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen; ++ ++ ++ ret = rtw_cfg80211_set_wpa_version(psecuritypriv, sme->crypto.wpa_versions); ++ if (ret < 0) ++ goto exit; ++ ++ ret = rtw_cfg80211_set_auth_type(psecuritypriv, sme->auth_type); ++ if (ret < 0) ++ goto exit; ++ ++ DBG_8192C("%s, ie_len=%zu\n", __func__, sme->ie_len); ++ ++ ret = rtw_cfg80211_set_wpa_ie(padapter, sme->ie, sme->ie_len); ++ if (ret < 0) ++ goto exit; ++ ++ if (sme->crypto.n_ciphers_pairwise) { ++ ret = rtw_cfg80211_set_cipher(psecuritypriv, sme->crypto.ciphers_pairwise[0], _TRUE); ++ if (ret < 0) ++ goto exit; ++ } ++ ++ //For WEP Shared auth ++ if((psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_Shared ++ || psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_Auto) && sme->key ++ ) ++ { ++ u32 wep_key_idx, wep_key_len,wep_total_len; ++ NDIS_802_11_WEP *pwep = NULL; ++ DBG_871X("%s(): Shared/Auto WEP\n",__FUNCTION__); ++ ++ wep_key_idx = sme->key_idx; ++ wep_key_len = sme->key_len; ++ ++ if (sme->key_idx > WEP_KEYS) { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (wep_key_len > 0) ++ { ++ wep_key_len = wep_key_len <= 5 ? 5 : 13; ++ wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial); ++ pwep =(NDIS_802_11_WEP *) rtw_malloc(wep_total_len); ++ if(pwep == NULL){ ++ DBG_871X(" wpa_set_encryption: pwep allocate fail !!!\n"); ++ ret = -ENOMEM; ++ goto exit; ++ } ++ ++ _rtw_memset(pwep, 0, wep_total_len); ++ ++ pwep->KeyLength = wep_key_len; ++ pwep->Length = wep_total_len; ++ ++ if(wep_key_len==13) ++ { ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_; ++ } ++ } ++ else { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ pwep->KeyIndex = wep_key_idx; ++ pwep->KeyIndex |= 0x80000000; ++ ++ _rtw_memcpy(pwep->KeyMaterial, (void *)sme->key, pwep->KeyLength); ++ ++ if(rtw_set_802_11_add_wep(padapter, pwep) == (u8)_FAIL) ++ { ++ ret = -EOPNOTSUPP ; ++ } ++ ++ if (pwep) { ++ rtw_mfree((u8 *)pwep,wep_total_len); ++ } ++ ++ if(ret < 0) ++ goto exit; ++ } ++ ++ ret = rtw_cfg80211_set_cipher(psecuritypriv, sme->crypto.cipher_group, _FALSE); ++ if (ret < 0) ++ return ret; ++ ++ if (sme->crypto.n_akm_suites) { ++ ret = rtw_cfg80211_set_key_mgt(psecuritypriv, sme->crypto.akm_suites[0]); ++ if (ret < 0) ++ goto exit; ++ } ++ ++ authmode = psecuritypriv->ndisauthtype; ++ rtw_set_802_11_authentication_mode(padapter, authmode); ++ ++ //rtw_set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus); ++ ++ if (rtw_set_802_11_connect(padapter, sme->bssid, &ndis_ssid) == _FALSE) { ++ ret = -1; ++ goto exit; ++ } ++ ++ DBG_8192C("set ssid:dot11AuthAlgrthm=%d, dot11PrivacyAlgrthm=%d, dot118021XGrpPrivacy=%d\n", psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm, psecuritypriv->dot118021XGrpPrivacy); ++ ++exit: ++ ++ DBG_8192C("<=%s, ret %d\n",__FUNCTION__, ret); ++ ++ return ret; ++} ++ ++static int cfg80211_rtw_disconnect(struct wiphy *wiphy, struct net_device *ndev, ++ u16 reason_code) ++{ ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ rtw_set_roaming(padapter, 0); ++ ++ if(check_fwstate(&padapter->mlmepriv, _FW_LINKED)) ++ { ++ rtw_scan_abort(padapter); ++ LeaveAllPowerSaveMode(padapter); ++ rtw_disassoc_cmd(padapter, 500, _FALSE); ++ ++ DBG_871X("%s...call rtw_indicate_disconnect\n", __FUNCTION__); ++ ++ padapter->mlmepriv.not_indic_disco = _TRUE; ++ rtw_indicate_disconnect(padapter); ++ padapter->mlmepriv.not_indic_disco = _FALSE; ++ ++ rtw_free_assoc_resources(padapter, 1); ++ } ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_set_txpower(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0)) ++ struct wireless_dev *wdev, ++#endif ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) || defined(COMPAT_KERNEL_RELEASE) ++ enum nl80211_tx_power_setting type, int mbm) ++#else ++ enum tx_power_setting type, int dbm) ++#endif ++{ ++#if 0 ++ struct iwm_priv *iwm = wiphy_to_iwm(wiphy); ++ int ret; ++ ++ switch (type) { ++ case NL80211_TX_POWER_AUTOMATIC: ++ return 0; ++ case NL80211_TX_POWER_FIXED: ++ if (mbm < 0 || (mbm % 100)) ++ return -EOPNOTSUPP; ++ ++ if (!test_bit(IWM_STATUS_READY, &iwm->status)) ++ return 0; ++ ++ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, ++ CFG_TX_PWR_LIMIT_USR, ++ MBM_TO_DBM(mbm) * 2); ++ if (ret < 0) ++ return ret; ++ ++ return iwm_tx_power_trigger(iwm); ++ default: ++ IWM_ERR(iwm, "Unsupported power type: %d\n", type); ++ return -EOPNOTSUPP; ++ } ++#endif ++ DBG_8192C("%s\n", __func__); ++ return 0; ++} ++ ++static int cfg80211_rtw_get_txpower(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0)) ++ struct wireless_dev *wdev, ++#endif ++ int *dbm) ++{ ++ //_adapter *padapter = wiphy_to_adapter(wiphy); ++ ++ DBG_8192C("%s\n", __func__); ++ ++ *dbm = (12); ++ ++ return 0; ++} ++ ++inline bool rtw_cfg80211_pwr_mgmt(_adapter *adapter) ++{ ++ struct rtw_wdev_priv *rtw_wdev_priv = wdev_to_priv(adapter->rtw_wdev); ++ return rtw_wdev_priv->power_mgmt; ++} ++ ++static int cfg80211_rtw_set_power_mgmt(struct wiphy *wiphy, ++ struct net_device *ndev, ++ bool enabled, int timeout) ++{ ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct rtw_wdev_priv *rtw_wdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ ++ DBG_871X(FUNC_NDEV_FMT" enabled:%u, timeout:%d\n", FUNC_NDEV_ARG(ndev), ++ enabled, timeout); ++ ++ rtw_wdev_priv->power_mgmt = enabled; ++ ++ #ifdef CONFIG_LPS ++ if (!enabled) ++ LPS_Leave(padapter); ++ #endif ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_set_pmksa(struct wiphy *wiphy, ++ struct net_device *netdev, ++ struct cfg80211_pmksa *pmksa) ++{ ++ u8 index,blInserted = _FALSE; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ u8 strZeroMacAddress[ ETH_ALEN ] = { 0x00 }; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev)); ++ ++ if ( _rtw_memcmp( pmksa->bssid, strZeroMacAddress, ETH_ALEN ) == _TRUE ) ++ { ++ return -EINVAL; ++ } ++ ++ blInserted = _FALSE; ++ ++ //overwrite PMKID ++ for(index=0 ; indexPMKIDList[index].Bssid, pmksa->bssid, ETH_ALEN) ==_TRUE ) ++ { // BSSID is matched, the same AP => rewrite with new PMKID. ++ DBG_871X(FUNC_NDEV_FMT" BSSID exists in the PMKList.\n", FUNC_NDEV_ARG(netdev)); ++ ++ _rtw_memcpy( psecuritypriv->PMKIDList[index].PMKID, pmksa->pmkid, WLAN_PMKID_LEN); ++ psecuritypriv->PMKIDList[index].bUsed = _TRUE; ++ psecuritypriv->PMKIDIndex = index+1; ++ blInserted = _TRUE; ++ break; ++ } ++ } ++ ++ if(!blInserted) ++ { ++ // Find a new entry ++ DBG_871X(FUNC_NDEV_FMT" Use the new entry index = %d for this PMKID.\n", ++ FUNC_NDEV_ARG(netdev), psecuritypriv->PMKIDIndex ); ++ ++ _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].Bssid, pmksa->bssid, ETH_ALEN); ++ _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].PMKID, pmksa->pmkid, WLAN_PMKID_LEN); ++ ++ psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].bUsed = _TRUE; ++ psecuritypriv->PMKIDIndex++ ; ++ if(psecuritypriv->PMKIDIndex==16) ++ { ++ psecuritypriv->PMKIDIndex =0; ++ } ++ } ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_del_pmksa(struct wiphy *wiphy, ++ struct net_device *netdev, ++ struct cfg80211_pmksa *pmksa) ++{ ++ u8 index, bMatched = _FALSE; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev)); ++ ++ for(index=0 ; indexPMKIDList[index].Bssid, pmksa->bssid, ETH_ALEN) ==_TRUE ) ++ { // BSSID is matched, the same AP => Remove this PMKID information and reset it. ++ _rtw_memset( psecuritypriv->PMKIDList[index].Bssid, 0x00, ETH_ALEN ); ++ _rtw_memset( psecuritypriv->PMKIDList[index].PMKID, 0x00, WLAN_PMKID_LEN ); ++ psecuritypriv->PMKIDList[index].bUsed = _FALSE; ++ bMatched = _TRUE; ++ break; ++ } ++ } ++ ++ if(_FALSE == bMatched) ++ { ++ DBG_871X(FUNC_NDEV_FMT" do not have matched BSSID\n" ++ , FUNC_NDEV_ARG(netdev)); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_flush_pmksa(struct wiphy *wiphy, ++ struct net_device *netdev) ++{ ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev)); ++ ++ _rtw_memset( &psecuritypriv->PMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE ); ++ psecuritypriv->PMKIDIndex = 0; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_AP_MODE ++void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint frame_len) ++{ ++ s32 freq; ++ int channel; ++ struct wireless_dev *pwdev = padapter->rtw_wdev; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct net_device *ndev = padapter->pnetdev; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++#if defined(RTW_USE_CFG80211_STA_EVENT) || defined(COMPAT_KERNEL_RELEASE) ++ { ++ struct station_info sinfo; ++ u8 ie_offset; ++ if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ) ++ ie_offset = _ASOCREQ_IE_OFFSET_; ++ else // WIFI_REASSOCREQ ++ ie_offset = _REASOCREQ_IE_OFFSET_; ++ ++ sinfo.filled = 0; ++ sinfo.filled = STATION_INFO_ASSOC_REQ_IES; ++ sinfo.assoc_req_ies = pmgmt_frame + WLAN_HDR_A3_LEN + ie_offset; ++ sinfo.assoc_req_ies_len = frame_len - WLAN_HDR_A3_LEN - ie_offset; ++ cfg80211_new_sta(ndev, GetAddr2Ptr(pmgmt_frame), &sinfo, GFP_ATOMIC); ++ } ++#else /* defined(RTW_USE_CFG80211_STA_EVENT) */ ++ channel = pmlmeext->cur_channel; ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++ #ifdef COMPAT_KERNEL_RELEASE ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); ++ #elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); ++ #else //COMPAT_KERNEL_RELEASE ++ { ++ //to avoid WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION) when calling cfg80211_send_rx_assoc() ++ #ifndef CONFIG_PLATFORM_MSTAR ++ pwdev->iftype = NL80211_IFTYPE_STATION; ++ #endif //CONFIG_PLATFORM_MSTAR ++ DBG_8192C("iftype=%d before call cfg80211_send_rx_assoc()\n", pwdev->iftype); ++ rtw_cfg80211_send_rx_assoc(padapter, NULL, pmgmt_frame, frame_len); ++ DBG_8192C("iftype=%d after call cfg80211_send_rx_assoc()\n", pwdev->iftype); ++ pwdev->iftype = NL80211_IFTYPE_AP; ++ //cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC); ++ } ++ #endif //COMPAT_KERNEL_RELEASE ++#endif /* defined(RTW_USE_CFG80211_STA_EVENT) */ ++ ++} ++ ++void rtw_cfg80211_indicate_sta_disassoc(_adapter *padapter, unsigned char *da, unsigned short reason) ++{ ++ s32 freq; ++ int channel; ++ u8 *pmgmt_frame; ++ uint frame_len; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ u8 mgmt_buf[128] = {0}; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct net_device *ndev = padapter->pnetdev; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++#if defined(RTW_USE_CFG80211_STA_EVENT) || defined(COMPAT_KERNEL_RELEASE) ++ cfg80211_del_sta(ndev, da, GFP_ATOMIC); ++#else /* defined(RTW_USE_CFG80211_STA_EVENT) */ ++ channel = pmlmeext->cur_channel; ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++ pmgmt_frame = mgmt_buf; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pmgmt_frame; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ //_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN); ++ //_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr1, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, da, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pmgmt_frame, WIFI_DEAUTH); ++ ++ pmgmt_frame += sizeof(struct rtw_ieee80211_hdr_3addr); ++ frame_len = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ reason = cpu_to_le16(reason); ++ pmgmt_frame = rtw_set_fixed_ie(pmgmt_frame, _RSON_CODE_ , (unsigned char *)&reason, &frame_len); ++ ++ #ifdef COMPAT_KERNEL_RELEASE ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, mgmt_buf, frame_len, GFP_ATOMIC); ++ #elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER) ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, mgmt_buf, frame_len, GFP_ATOMIC); ++ #else //COMPAT_KERNEL_RELEASE ++ cfg80211_send_disassoc(padapter->pnetdev, mgmt_buf, frame_len); ++ //cfg80211_rx_action(padapter->pnetdev, freq, mgmt_buf, frame_len, GFP_ATOMIC); ++ #endif //COMPAT_KERNEL_RELEASE ++#endif /* defined(RTW_USE_CFG80211_STA_EVENT) */ ++} ++ ++static int rtw_cfg80211_monitor_if_open(struct net_device *ndev) ++{ ++ int ret = 0; ++ ++ DBG_8192C("%s\n", __func__); ++ ++ return ret; ++} ++ ++static int rtw_cfg80211_monitor_if_close(struct net_device *ndev) ++{ ++ int ret = 0; ++ ++ DBG_8192C("%s\n", __func__); ++ ++ return ret; ++} ++ ++static int rtw_cfg80211_monitor_if_xmit_entry(struct sk_buff *skb, struct net_device *ndev) ++{ ++ int ret = 0; ++ int rtap_len; ++ int qos_len = 0; ++ int dot11_hdr_len = 24; ++ int snap_len = 6; ++ unsigned char *pdata; ++ u16 frame_ctl; ++ unsigned char src_mac_addr[6]; ++ unsigned char dst_mac_addr[6]; ++ struct ieee80211_hdr *dot11_hdr; ++ struct ieee80211_radiotap_header *rtap_hdr; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ if (skb) ++ rtw_mstat_update(MSTAT_TYPE_SKB, MSTAT_ALLOC_SUCCESS, skb->truesize); ++ ++ if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) ++ goto fail; ++ ++ rtap_hdr = (struct ieee80211_radiotap_header *)skb->data; ++ if (unlikely(rtap_hdr->it_version)) ++ goto fail; ++ ++ rtap_len = ieee80211_get_radiotap_len(skb->data); ++ if (unlikely(skb->len < rtap_len)) ++ goto fail; ++ ++ if(rtap_len != 14) ++ { ++ DBG_8192C("radiotap len (should be 14): %d\n", rtap_len); ++ goto fail; ++ } ++ ++ /* Skip the ratio tap header */ ++ skb_pull(skb, rtap_len); ++ ++ dot11_hdr = (struct ieee80211_hdr *)skb->data; ++ frame_ctl = le16_to_cpu(dot11_hdr->frame_control); ++ /* Check if the QoS bit is set */ ++ if ((frame_ctl & RTW_IEEE80211_FCTL_FTYPE) == RTW_IEEE80211_FTYPE_DATA) { ++ /* Check if this ia a Wireless Distribution System (WDS) frame ++ * which has 4 MAC addresses ++ */ ++ if (dot11_hdr->frame_control & 0x0080) ++ qos_len = 2; ++ if ((dot11_hdr->frame_control & 0x0300) == 0x0300) ++ dot11_hdr_len += 6; ++ ++ memcpy(dst_mac_addr, dot11_hdr->addr1, sizeof(dst_mac_addr)); ++ memcpy(src_mac_addr, dot11_hdr->addr2, sizeof(src_mac_addr)); ++ ++ /* Skip the 802.11 header, QoS (if any) and SNAP, but leave spaces for ++ * for two MAC addresses ++ */ ++ skb_pull(skb, dot11_hdr_len + qos_len + snap_len - sizeof(src_mac_addr) * 2); ++ pdata = (unsigned char*)skb->data; ++ memcpy(pdata, dst_mac_addr, sizeof(dst_mac_addr)); ++ memcpy(pdata + sizeof(dst_mac_addr), src_mac_addr, sizeof(src_mac_addr)); ++ ++ DBG_8192C("should be eapol packet\n"); ++ ++ /* Use the real net device to transmit the packet */ ++ ret = _rtw_xmit_entry(skb, padapter->pnetdev); ++ ++ return ret; ++ ++ } ++ else if ((frame_ctl & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE)) ++ == (RTW_IEEE80211_FTYPE_MGMT|RTW_IEEE80211_STYPE_ACTION) ++ ) ++ { ++ //only for action frames ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ //u8 category, action, OUI_Subtype, dialogToken=0; ++ //unsigned char *frame_body; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ u8 *buf = skb->data; ++ u32 len = skb->len; ++ u8 category, action; ++ int type = -1; ++ ++ if (rtw_action_frame_parse(buf, len, &category, &action) == _FALSE) { ++ DBG_8192C(FUNC_NDEV_FMT" frame_control:0x%x\n", FUNC_NDEV_ARG(ndev), ++ le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)buf)->frame_ctl)); ++ goto fail; ++ } ++ ++ DBG_8192C("RTW_Tx:da="MAC_FMT" via "FUNC_NDEV_FMT"\n", ++ MAC_ARG(GetAddr1Ptr(buf)), FUNC_NDEV_ARG(ndev)); ++ #ifdef CONFIG_P2P ++ if((type = rtw_p2p_check_frames(padapter, buf, len, _TRUE)) >= 0) ++ goto dump; ++ #endif ++ if (category == RTW_WLAN_CATEGORY_PUBLIC) ++ DBG_871X("RTW_Tx:%s\n", action_public_str(action)); ++ else ++ DBG_871X("RTW_Tx:category(%u), action(%u)\n", category, action); ++ ++dump: ++ //starting alloc mgmt frame to dump it ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ goto fail; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ pattrib->retry_ctrl = _FALSE; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ ++ _rtw_memcpy(pframe, (void*)buf, len); ++ #ifdef CONFIG_WFD ++ if (type >= 0) ++ { ++ struct wifi_display_info *pwfd_info; ++ ++ pwfd_info = padapter->wdinfo.wfd_info; ++ ++ if ( _TRUE == pwfd_info->wfd_enable ) ++ { ++ rtw_append_wfd_ie( padapter, pframe, &len ); ++ } ++ } ++ #endif // CONFIG_WFD ++ pattrib->pktlen = len; ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ //update seq number ++ pmlmeext->mgnt_seq = GetSequence(pwlanhdr); ++ pattrib->seqnum = pmlmeext->mgnt_seq; ++ pmlmeext->mgnt_seq++; ++ ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ dump_mgntframe(padapter, pmgntframe); ++ ++ } ++ else ++ { ++ DBG_8192C("frame_ctl=0x%x\n", frame_ctl & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE)); ++ } ++ ++ ++fail: ++ ++ dev_kfree_skb(skb); ++ ++ return 0; ++ ++} ++ ++static void rtw_cfg80211_monitor_if_set_multicast_list(struct net_device *ndev) ++{ ++ DBG_8192C("%s\n", __func__); ++} ++ ++static int rtw_cfg80211_monitor_if_set_mac_address(struct net_device *ndev, void *addr) ++{ ++ int ret = 0; ++ ++ DBG_8192C("%s\n", __func__); ++ ++ return ret; ++} ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++static const struct net_device_ops rtw_cfg80211_monitor_if_ops = { ++ .ndo_open = rtw_cfg80211_monitor_if_open, ++ .ndo_stop = rtw_cfg80211_monitor_if_close, ++ .ndo_start_xmit = rtw_cfg80211_monitor_if_xmit_entry, ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)) ++ .ndo_set_multicast_list = rtw_cfg80211_monitor_if_set_multicast_list, ++ #endif ++ .ndo_set_mac_address = rtw_cfg80211_monitor_if_set_mac_address, ++}; ++#endif ++ ++static int rtw_cfg80211_add_monitor_if(_adapter *padapter, char *name, struct net_device **ndev) ++{ ++ int ret = 0; ++ struct net_device* mon_ndev = NULL; ++ struct wireless_dev* mon_wdev = NULL; ++ struct rtw_netdev_priv_indicator *pnpi; ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ ++ if (!name ) { ++ DBG_871X(FUNC_ADPT_FMT" without specific name\n", FUNC_ADPT_ARG(padapter)); ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (pwdev_priv->pmon_ndev) { ++ DBG_871X(FUNC_ADPT_FMT" monitor interface exist: "NDEV_FMT"\n", ++ FUNC_ADPT_ARG(padapter), NDEV_ARG(pwdev_priv->pmon_ndev)); ++ ret = -EBUSY; ++ goto out; ++ } ++ ++ mon_ndev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator)); ++ if (!mon_ndev) { ++ DBG_871X(FUNC_ADPT_FMT" allocate ndev fail\n", FUNC_ADPT_ARG(padapter)); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ mon_ndev->type = ARPHRD_IEEE80211_RADIOTAP; ++ strncpy(mon_ndev->name, name, IFNAMSIZ); ++ mon_ndev->name[IFNAMSIZ - 1] = 0; ++ mon_ndev->destructor = rtw_ndev_destructor; ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++ mon_ndev->netdev_ops = &rtw_cfg80211_monitor_if_ops; ++#else ++ mon_ndev->open = rtw_cfg80211_monitor_if_open; ++ mon_ndev->stop = rtw_cfg80211_monitor_if_close; ++ mon_ndev->hard_start_xmit = rtw_cfg80211_monitor_if_xmit_entry; ++ mon_ndev->set_mac_address = rtw_cfg80211_monitor_if_set_mac_address; ++#endif ++ ++ pnpi = netdev_priv(mon_ndev); ++ pnpi->priv = padapter; ++ pnpi->sizeof_priv = sizeof(_adapter); ++ ++ /* wdev */ ++ mon_wdev = (struct wireless_dev *)rtw_zmalloc(sizeof(struct wireless_dev)); ++ if (!mon_wdev) { ++ DBG_871X(FUNC_ADPT_FMT" allocate mon_wdev fail\n", FUNC_ADPT_ARG(padapter)); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ mon_wdev->wiphy = padapter->rtw_wdev->wiphy; ++ mon_wdev->netdev = mon_ndev; ++ mon_wdev->iftype = NL80211_IFTYPE_MONITOR; ++ mon_ndev->ieee80211_ptr = mon_wdev; ++ ++ ret = register_netdevice(mon_ndev); ++ if (ret) { ++ goto out; ++ } ++ ++ *ndev = pwdev_priv->pmon_ndev = mon_ndev; ++ _rtw_memcpy(pwdev_priv->ifname_mon, name, IFNAMSIZ+1); ++ ++out: ++ if (ret && mon_wdev) { ++ rtw_mfree((u8*)mon_wdev, sizeof(struct wireless_dev)); ++ mon_wdev = NULL; ++ } ++ ++ if (ret && mon_ndev) { ++ free_netdev(mon_ndev); ++ *ndev = mon_ndev = NULL; ++ } ++ ++ return ret; ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++static struct wireless_dev * ++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++static struct net_device * ++#else ++static int ++#endif ++ cfg80211_rtw_add_virtual_intf( ++ struct wiphy *wiphy, ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0)) ++ const char *name, ++ #else ++ char *name, ++ #endif ++ enum nl80211_iftype type, u32 *flags, struct vif_params *params) ++{ ++ int ret = 0; ++ struct net_device* ndev = NULL; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ ++ DBG_871X(FUNC_ADPT_FMT " wiphy:%s, name:%s, type:%d\n", ++ FUNC_ADPT_ARG(padapter), wiphy_name(wiphy), name, type); ++ ++ switch (type) { ++ case NL80211_IFTYPE_ADHOC: ++ case NL80211_IFTYPE_AP_VLAN: ++ case NL80211_IFTYPE_WDS: ++ case NL80211_IFTYPE_MESH_POINT: ++ ret = -ENODEV; ++ break; ++ case NL80211_IFTYPE_MONITOR: ++ ret = rtw_cfg80211_add_monitor_if(padapter, (char *)name, &ndev); ++ break; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ case NL80211_IFTYPE_P2P_CLIENT: ++#endif ++ case NL80211_IFTYPE_STATION: ++ ret = -ENODEV; ++ break; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ case NL80211_IFTYPE_P2P_GO: ++#endif ++ case NL80211_IFTYPE_AP: ++ ret = -ENODEV; ++ break; ++ default: ++ ret = -ENODEV; ++ DBG_871X("Unsupported interface type\n"); ++ break; ++ } ++ ++ DBG_871X(FUNC_ADPT_FMT" ndev:%p, ret:%d\n", FUNC_ADPT_ARG(padapter), ndev, ret); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ return ndev ? ndev->ieee80211_ptr : ERR_PTR(ret); ++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ return ndev ? ndev : ERR_PTR(ret); ++#else ++ return ret; ++#endif ++} ++ ++static int cfg80211_rtw_del_virtual_intf(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ struct wireless_dev *wdev ++#else ++ struct net_device *ndev ++#endif ++) ++{ ++ struct rtw_wdev_priv *pwdev_priv = (struct rtw_wdev_priv *)wiphy_priv(wiphy); ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ struct net_device *ndev; ++ ndev = wdev ? wdev->netdev : NULL; ++#endif ++ ++ if (!ndev) ++ goto exit; ++ ++ unregister_netdevice(ndev); ++ ++ if (ndev == pwdev_priv->pmon_ndev) { ++ pwdev_priv->pmon_ndev = NULL; ++ pwdev_priv->ifname_mon[0] = '\0'; ++ DBG_871X(FUNC_NDEV_FMT" remove monitor interface\n", FUNC_NDEV_ARG(ndev)); ++ } ++ ++exit: ++ return 0; ++} ++ ++static int rtw_add_beacon(_adapter *adapter, const u8 *head, size_t head_len, const u8 *tail, size_t tail_len) ++{ ++ int ret=0; ++ u8 *pbuf = NULL; ++ uint len, wps_ielen=0; ++ uint p2p_ielen=0; ++ u8 *p2p_ie; ++ u8 got_p2p_ie = _FALSE; ++ struct mlme_priv *pmlmepriv = &(adapter->mlmepriv); ++ //struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ ++ DBG_8192C("%s beacon_head_len=%zu, beacon_tail_len=%zu\n", __FUNCTION__, head_len, tail_len); ++ ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ if(head_len<24) ++ return -EINVAL; ++ ++ ++ pbuf = rtw_zmalloc(head_len+tail_len); ++ if(!pbuf) ++ return -ENOMEM; ++ ++ ++ //_rtw_memcpy(&pstapriv->max_num_sta, param->u.bcn_ie.reserved, 2); ++ ++ //if((pstapriv->max_num_sta>NUM_STA) || (pstapriv->max_num_sta<=0)) ++ // pstapriv->max_num_sta = NUM_STA; ++ ++ ++ _rtw_memcpy(pbuf, (void *)head+24, head_len-24);// 24=beacon header len. ++ _rtw_memcpy(pbuf+head_len-24, (void *)tail, tail_len); ++ ++ len = head_len+tail_len-24; ++ ++ //check wps ie if inclued ++ if(rtw_get_wps_ie(pbuf+_FIXED_IE_LENGTH_, len-_FIXED_IE_LENGTH_, NULL, &wps_ielen)) ++ DBG_8192C("add bcn, wps_ielen=%d\n", wps_ielen); ++ ++#ifdef CONFIG_P2P ++ //check p2p ie if inclued ++ if( adapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ { ++ //check p2p if enable ++ if(rtw_get_p2p_ie(pbuf+_FIXED_IE_LENGTH_, len-_FIXED_IE_LENGTH_, NULL, &p2p_ielen)) ++ { ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ struct wifidirect_info *pwdinfo= &(adapter->wdinfo); ++ ++ DBG_8192C("got p2p_ie, len=%d\n", p2p_ielen); ++ got_p2p_ie = _TRUE; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_8192C("Enable P2P function for the first time\n"); ++ rtw_p2p_enable(adapter, P2P_ROLE_GO); ++ wdev_to_priv(adapter->rtw_wdev)->p2p_enabled = _TRUE; ++ } ++ else ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++ ++ DBG_8192C("enter GO Mode, p2p_ielen=%d\n", p2p_ielen); ++ ++ rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK); ++ pwdinfo->intent = 15; ++ } ++ } ++ } ++#endif // CONFIG_P2P ++ ++ /* pbss_network->IEs will not include p2p_ie, wfd ie */ ++ rtw_ies_remove_ie(pbuf, &len, _BEACON_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, P2P_OUI, 4); ++ rtw_ies_remove_ie(pbuf, &len, _BEACON_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, WFD_OUI, 4); ++ ++ if (rtw_check_beacon_data(adapter, pbuf, len) == _SUCCESS) ++ { ++#ifdef CONFIG_P2P ++ //check p2p if enable ++ if(got_p2p_ie == _TRUE) ++ { ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ struct wifidirect_info *pwdinfo= &(adapter->wdinfo); ++ pwdinfo->operating_channel = pmlmeext->cur_channel; ++ } ++#endif //CONFIG_P2P ++ ret = 0; ++ } ++ else ++ { ++ ret = -EINVAL; ++ } ++ ++ ++ rtw_mfree(pbuf, head_len+tail_len); ++ ++ return ret; ++} ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) && !defined(COMPAT_KERNEL_RELEASE) ++static int cfg80211_rtw_add_beacon(struct wiphy *wiphy, struct net_device *ndev, ++ struct beacon_parameters *info) ++{ ++ int ret=0; ++ _adapter *adapter = wiphy_to_adapter(wiphy); ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ret = rtw_add_beacon(adapter, info->head, info->head_len, info->tail, info->tail_len); ++ ++ return ret; ++} ++ ++static int cfg80211_rtw_set_beacon(struct wiphy *wiphy, struct net_device *ndev, ++ struct beacon_parameters *info) ++{ ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ pmlmeext->bstart_bss = _TRUE; ++ ++ cfg80211_rtw_add_beacon(wiphy, ndev, info); ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_del_beacon(struct wiphy *wiphy, struct net_device *ndev) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return 0; ++} ++#else ++static int cfg80211_rtw_start_ap(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_ap_settings *settings) ++{ ++ int ret = 0; ++ _adapter *adapter = wiphy_to_adapter(wiphy); ++ ++ DBG_871X(FUNC_NDEV_FMT" hidden_ssid:%d, auth_type:%d\n", FUNC_NDEV_ARG(ndev), ++ settings->hidden_ssid, settings->auth_type); ++ ++ ret = rtw_add_beacon(adapter, settings->beacon.head, settings->beacon.head_len, ++ settings->beacon.tail, settings->beacon.tail_len); ++ ++ adapter->mlmeextpriv.mlmext_info.hidden_ssid_mode = settings->hidden_ssid; ++ ++ if (settings->ssid && settings->ssid_len) { ++ WLAN_BSSID_EX *pbss_network = &adapter->mlmepriv.cur_network.network; ++ WLAN_BSSID_EX *pbss_network_ext = &adapter->mlmeextpriv.mlmext_info.network; ++ ++ if(0) ++ DBG_871X(FUNC_ADPT_FMT" ssid:(%s,%d), from ie:(%s,%d)\n", FUNC_ADPT_ARG(adapter), ++ settings->ssid, settings->ssid_len, ++ pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength); ++ ++ _rtw_memcpy(pbss_network->Ssid.Ssid, (void *)settings->ssid, settings->ssid_len); ++ pbss_network->Ssid.SsidLength = settings->ssid_len; ++ _rtw_memcpy(pbss_network_ext->Ssid.Ssid, (void *)settings->ssid, settings->ssid_len); ++ pbss_network_ext->Ssid.SsidLength = settings->ssid_len; ++ ++ if(0) ++ DBG_871X(FUNC_ADPT_FMT" after ssid:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter), ++ pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength, ++ pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength); ++ } ++ ++ return ret; ++} ++ ++static int cfg80211_rtw_change_beacon(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_beacon_data *info) ++{ ++ int ret = 0; ++ _adapter *adapter = wiphy_to_adapter(wiphy); ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ ret = rtw_add_beacon(adapter, info->head, info->head_len, info->tail, info->tail_len); ++ ++ return ret; ++} ++ ++static int cfg80211_rtw_stop_ap(struct wiphy *wiphy, struct net_device *ndev) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ return 0; ++} ++ ++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) ++ ++static int cfg80211_rtw_add_station(struct wiphy *wiphy, struct net_device *ndev, ++ u8 *mac, struct station_parameters *params) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_del_station(struct wiphy *wiphy, struct net_device *ndev, ++ u8 *mac) ++{ ++ int ret=0; ++ _irqL irqL; ++ _list *phead, *plist; ++ u8 updated; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("+"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE) ++ { ++ DBG_8192C("%s, fw_state != FW_LINKED|WIFI_AP_STATE\n", __func__); ++ return -EINVAL; ++ } ++ ++ ++ if(!mac) ++ { ++ DBG_8192C("flush all sta, and cam_entry\n"); ++ ++ flush_all_cam_entry(padapter); //clear CAM ++ ++ ret = rtw_sta_flush(padapter); ++ ++ return ret; ++ } ++ ++ ++ DBG_8192C("free sta macaddr =" MAC_FMT "\n", MAC_ARG(mac)); ++ ++ if (mac[0] == 0xff && mac[1] == 0xff && ++ mac[2] == 0xff && mac[3] == 0xff && ++ mac[4] == 0xff && mac[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //check asoc_queue ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ ++ plist = get_next(plist); ++ ++ if(_rtw_memcmp(mac, psta->hwaddr, ETH_ALEN)) ++ { ++ if(psta->dot8021xalg == 1 && psta->bpairwise_key_installed == _FALSE) ++ { ++ DBG_8192C("%s, sta's dot8021xalg = 1 and key_installed = _FALSE\n", __func__); ++ } ++ else ++ { ++ DBG_8192C("free psta=%p, aid=%d\n", psta, psta->aid); ++ ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ ++ //_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ updated = ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING); ++ //_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ psta = NULL; ++ ++ break; ++ } ++ ++ } ++ ++ } ++ ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ associated_clients_update(padapter, updated); ++ ++ DBG_871X("-"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return ret; ++ ++} ++ ++static int cfg80211_rtw_change_station(struct wiphy *wiphy, struct net_device *ndev, ++ u8 *mac, struct station_parameters *params) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_dump_station(struct wiphy *wiphy, struct net_device *ndev, ++ int idx, u8 *mac, struct station_info *sinfo) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ //TODO: dump scanned queue ++ ++ return -ENOENT; ++} ++ ++static int cfg80211_rtw_change_bss(struct wiphy *wiphy, struct net_device *ndev, ++ struct bss_parameters *params) ++{ ++ u8 i; ++ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++/* ++ DBG_8192C("use_cts_prot=%d\n", params->use_cts_prot); ++ DBG_8192C("use_short_preamble=%d\n", params->use_short_preamble); ++ DBG_8192C("use_short_slot_time=%d\n", params->use_short_slot_time); ++ DBG_8192C("ap_isolate=%d\n", params->ap_isolate); ++ ++ DBG_8192C("basic_rates_len=%d\n", params->basic_rates_len); ++ for(i=0; ibasic_rates_len; i++) ++ { ++ DBG_8192C("basic_rates=%d\n", params->basic_rates[i]); ++ ++ } ++*/ ++ return 0; ++ ++} ++ ++static int cfg80211_rtw_set_channel(struct wiphy *wiphy ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ , struct net_device *ndev ++ #endif ++ , struct ieee80211_channel *chan, enum nl80211_channel_type channel_type) ++{ ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ #endif ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_auth(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_auth_request *req) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return 0; ++} ++ ++static int cfg80211_rtw_assoc(struct wiphy *wiphy, struct net_device *ndev, ++ struct cfg80211_assoc_request *req) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++ return 0; ++} ++#endif //CONFIG_AP_MODE ++ ++void rtw_cfg80211_rx_action_p2p(_adapter *padapter, u8 *pmgmt_frame, uint frame_len) ++{ ++ int type; ++ s32 freq; ++ int channel; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ u8 category, action; ++ ++ channel = rtw_get_oper_ch(padapter); ++ ++ DBG_8192C("RTW_Rx:cur_ch=%d\n", channel); ++ #ifdef CONFIG_P2P ++ type = rtw_p2p_check_frames(padapter, pmgmt_frame, frame_len, _FALSE); ++ if (type >= 0) ++ goto indicate; ++ #endif ++ rtw_action_frame_parse(pmgmt_frame, frame_len, &category, &action); ++ DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action); ++ ++indicate: ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); ++#else ++ cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC); ++#endif ++} ++ ++void rtw_cfg80211_rx_p2p_action_public(_adapter *padapter, u8 *pmgmt_frame, uint frame_len) ++{ ++ int type; ++ s32 freq; ++ int channel; ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ u8 category, action; ++ ++ channel = rtw_get_oper_ch(padapter); ++ ++ DBG_8192C("RTW_Rx:cur_ch=%d\n", channel); ++ #ifdef CONFIG_P2P ++ type = rtw_p2p_check_frames(padapter, pmgmt_frame, frame_len, _FALSE); ++ if (type >= 0) { ++ switch (type) { ++ case P2P_GO_NEGO_CONF: ++ case P2P_PROVISION_DISC_RESP: ++ case P2P_INVIT_RESP: ++ rtw_set_scan_deny(padapter, 2000); ++ rtw_clear_scan_deny(padapter); ++ } ++ goto indicate; ++ } ++ #endif ++ rtw_action_frame_parse(pmgmt_frame, frame_len, &category, &action); ++ DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action); ++ ++indicate: ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); ++#else ++ cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC); ++#endif ++} ++ ++void rtw_cfg80211_rx_action(_adapter *adapter, u8 *frame, uint frame_len, const char*msg) ++{ ++ s32 freq; ++ int channel; ++ struct mlme_ext_priv *pmlmeext = &(adapter->mlmeextpriv); ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev); ++ u8 category, action; ++ ++ channel = rtw_get_oper_ch(adapter); ++ ++ rtw_action_frame_parse(frame, frame_len, &category, &action); ++ ++ DBG_8192C("RTW_Rx:cur_ch=%d\n", channel); ++ if (msg) ++ DBG_871X("RTW_Rx:%s\n", msg); ++ else ++ DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action); ++ ++ if (channel <= RTW_CH_MAX_2G_CHANNEL) ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ else ++ freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ rtw_cfg80211_rx_mgmt(adapter, freq, 0, frame, frame_len, GFP_ATOMIC); ++#else ++ cfg80211_rx_action(adapter->pnetdev, freq, frame, frame_len, GFP_ATOMIC); ++#endif ++ ++} ++ ++#ifdef CONFIG_P2P ++void rtw_cfg80211_issue_p2p_provision_request(_adapter *padapter, const u8 *buf, size_t len) ++{ ++ u16 wps_devicepassword_id = 0x0000; ++ uint wps_devicepassword_id_len = 0; ++ u8 wpsie[ 255 ] = { 0x00 }, p2p_ie[ 255 ] = { 0x00 }; ++ uint p2p_ielen = 0; ++ uint wpsielen = 0; ++ u32 devinfo_contentlen = 0; ++ u8 devinfo_content[64] = { 0x00 }; ++ u16 capability = 0; ++ uint capability_len = 0; ++ ++ unsigned char category = RTW_WLAN_CATEGORY_PUBLIC; ++ u8 action = P2P_PUB_ACTION_ACTION; ++ u8 dialogToken = 1; ++ u32 p2poui = cpu_to_be32(P2POUI); ++ u8 oui_subtype = P2P_PROVISION_DISC_REQ; ++ u32 p2pielen = 0; ++#ifdef CONFIG_WFD ++ u32 wfdielen = 0; ++#endif //CONFIG_WFD ++ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ unsigned short *fctrl; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ u8 *frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr)); ++ size_t frame_body_len = len - sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ ++ DBG_871X( "[%s] In\n", __FUNCTION__ ); ++ ++ //prepare for building provision_request frame ++ _rtw_memcpy(pwdinfo->tx_prov_disc_info.peerIFAddr, GetAddr1Ptr(buf), ETH_ALEN); ++ _rtw_memcpy(pwdinfo->tx_prov_disc_info.peerDevAddr, GetAddr1Ptr(buf), ETH_ALEN); ++ ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON; ++ ++ rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, wpsie, &wpsielen); ++ rtw_get_wps_attr_content( wpsie, wpsielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len); ++ wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id ); ++ ++ switch(wps_devicepassword_id) ++ { ++ case WPS_DPID_PIN: ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_LABEL; ++ break; ++ case WPS_DPID_USER_SPEC: ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_DISPLYA; ++ break; ++ case WPS_DPID_MACHINE_SPEC: ++ break; ++ case WPS_DPID_REKEY: ++ break; ++ case WPS_DPID_PBC: ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON; ++ break; ++ case WPS_DPID_REGISTRAR_SPEC: ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_KEYPAD; ++ break; ++ default: ++ break; ++ } ++ ++ ++ if ( rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, p2p_ie, &p2p_ielen ) ) ++ { ++ ++ rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO, devinfo_content, &devinfo_contentlen); ++ rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&capability, &capability_len); ++ ++ } ++ ++ ++ //start to build provision_request frame ++ _rtw_memset(wpsie, 0, sizeof(wpsie)); ++ _rtw_memset(p2p_ie, 0, sizeof(p2p_ie)); ++ p2p_ielen = 0; ++ ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ return; ++ } ++ ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ ++ fctrl = &(pwlanhdr->frame_ctl); ++ *(fctrl) = 0; ++ ++ _rtw_memcpy(pwlanhdr->addr1, pwdinfo->tx_prov_disc_info.peerDevAddr, ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); ++ _rtw_memcpy(pwlanhdr->addr3, pwdinfo->tx_prov_disc_info.peerDevAddr, ETH_ALEN); ++ ++ SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq); ++ pmlmeext->mgnt_seq++; ++ SetFrameSubType(pframe, WIFI_ACTION); ++ ++ pframe += sizeof(struct rtw_ieee80211_hdr_3addr); ++ pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr); ++ ++ pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen)); ++ pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen)); ++ ++ ++ //build_prov_disc_request_p2p_ie ++ // P2P OUI ++ p2pielen = 0; ++ p2p_ie[ p2pielen++ ] = 0x50; ++ p2p_ie[ p2pielen++ ] = 0x6F; ++ p2p_ie[ p2pielen++ ] = 0x9A; ++ p2p_ie[ p2pielen++ ] = 0x09; // WFA P2P v1.0 ++ ++ // Commented by Albert 20110301 ++ // According to the P2P Specification, the provision discovery request frame should contain 3 P2P attributes ++ // 1. P2P Capability ++ // 2. Device Info ++ // 3. Group ID ( When joining an operating P2P Group ) ++ ++ // P2P Capability ATTR ++ // Type: ++ p2p_ie[ p2pielen++ ] = P2P_ATTR_CAPABILITY; ++ ++ // Length: ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 ); ++ RTW_PUT_LE16(p2p_ie + p2pielen, 0x0002); ++ p2pielen += 2; ++ ++ // Value: ++ // Device Capability Bitmap, 1 byte ++ // Group Capability Bitmap, 1 byte ++ _rtw_memcpy(p2p_ie + p2pielen, &capability, 2); ++ p2pielen += 2; ++ ++ ++ // Device Info ATTR ++ // Type: ++ p2p_ie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO; ++ ++ // Length: ++ // 21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) ++ // + NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes) ++ //*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len ); ++ RTW_PUT_LE16(p2p_ie + p2pielen, devinfo_contentlen); ++ p2pielen += 2; ++ ++ // Value: ++ _rtw_memcpy(p2p_ie + p2pielen, devinfo_content, devinfo_contentlen); ++ p2pielen += devinfo_contentlen; ++ ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2p_ie, &p2p_ielen); ++ //p2pielen = build_prov_disc_request_p2p_ie( pwdinfo, pframe, NULL, 0, pwdinfo->tx_prov_disc_info.peerDevAddr); ++ //pframe += p2pielen; ++ pattrib->pktlen += p2p_ielen; ++ ++ wpsielen = 0; ++ // WPS OUI ++ *(u32*) ( wpsie ) = cpu_to_be32( WPSOUI ); ++ wpsielen += 4; ++ ++ // WPS version ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 ); ++ wpsielen += 2; ++ ++ // Value: ++ wpsie[wpsielen++] = WPS_VERSION_1; // Version 1.0 ++ ++ // Config Method ++ // Type: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD ); ++ wpsielen += 2; ++ ++ // Length: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 ); ++ wpsielen += 2; ++ ++ // Value: ++ *(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->tx_prov_disc_info.wps_config_method_request ); ++ wpsielen += 2; ++ ++ pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen ); ++ ++ ++#ifdef CONFIG_WFD ++ wfdielen = build_provdisc_req_wfd_ie(pwdinfo, pframe); ++ pframe += wfdielen; ++ pattrib->pktlen += wfdielen; ++#endif //CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ //dump_mgntframe(padapter, pmgntframe); ++ if (dump_mgntframe_and_wait_ack(padapter, pmgntframe) != _SUCCESS) ++ DBG_8192C("%s, ack to\n", __func__); ++ ++ //if(wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC) ++ //{ ++ // DBG_8192C("waiting for p2p peer key-in PIN CODE\n"); ++ // rtw_msleep_os(15000); // 15 sec for key in PIN CODE, workaround for GS2 before issuing Nego Req. ++ //} ++ ++} ++ ++static s32 cfg80211_rtw_remain_on_channel(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ struct wireless_dev *wdev, ++#else ++ struct net_device *ndev, ++#endif ++ struct ieee80211_channel * channel, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++ enum nl80211_channel_type channel_type, ++#endif ++ unsigned int duration, u64 *cookie) ++{ ++ s32 err = 0; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo; ++ u8 remain_ch = (u8) ieee80211_frequency_to_channel(channel->center_freq); ++ u8 ready_on_channel = _FALSE; ++ ++ DBG_871X(FUNC_ADPT_FMT" ch:%u duration:%d\n", FUNC_ADPT_ARG(padapter), remain_ch, duration); ++ ++ if(pcfg80211_wdinfo->is_ro_ch == _TRUE) ++ { ++ DBG_8192C("%s, cancel ro ch timer\n", __func__); ++ ++ _cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ATOMIC_SET(&pwdev_priv->ro_ch_to, 1); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ p2p_protocol_wk_hdl(padapter, P2P_RO_CH_WK); ++ } ++ ++ pcfg80211_wdinfo->is_ro_ch = _TRUE; ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ err = -EFAULT; ++ goto exit; ++ } ++ ++ _rtw_memcpy(&pcfg80211_wdinfo->remain_on_ch_channel, channel, sizeof(struct ieee80211_channel)); ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++ pcfg80211_wdinfo->remain_on_ch_type= channel_type; ++ #endif ++ pcfg80211_wdinfo->remain_on_ch_cookie= *cookie; ++ ++ rtw_scan_abort(padapter); ++#ifdef CONFIG_CONCURRENT_MODE ++ if(rtw_buddy_adapter_up(padapter)) ++ rtw_scan_abort(padapter->pbuddy_adapter); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ //if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ rtw_p2p_enable(padapter, P2P_ROLE_DEVICE); ++ wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _TRUE; ++ } ++ else ++ { ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo)); ++#endif ++ } ++ ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN); ++ ++ ++ if(duration < 400) ++ duration = duration*3;//extend from exper. ++ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(check_buddy_fwstate(padapter, _FW_LINKED) && ++ (durationext_listen_interval)) ++ { ++ duration = duration + pwdinfo->ext_listen_interval; ++ } ++#endif ++ ++ pcfg80211_wdinfo->restore_channel = rtw_get_oper_ch(padapter); ++ ++ if(rtw_ch_set_search_ch(pmlmeext->channel_set, remain_ch) >= 0) { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ if(remain_ch != pbuddy_mlmeext->cur_channel) ++ { ++ if(ATOMIC_READ(&pwdev_priv->switch_ch_to)==1 || ++ (remain_ch != pmlmeext->cur_channel)) ++ { ++ DBG_8192C("%s, issue nulldata pwrbit=1\n", __func__); ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500); ++ ++ ATOMIC_SET(&pwdev_priv->switch_ch_to, 0); ++ ++ DBG_8192C("%s, set switch ch timer, duration=%d\n", __func__, duration-pwdinfo->ext_listen_interval); ++ _set_timer(&pwdinfo->ap_p2p_switch_timer, duration-pwdinfo->ext_listen_interval); ++ } ++ } ++ ++ ready_on_channel = _TRUE; ++ //pmlmeext->cur_channel = remain_ch; ++ //set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ }else ++#endif //CONFIG_CONCURRENT_MODE ++ if(remain_ch != pmlmeext->cur_channel ) ++ { ++ ready_on_channel = _TRUE; ++ //pmlmeext->cur_channel = remain_ch; ++ //set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ } else { ++ DBG_871X("%s remain_ch:%u not in channel plan!!!!\n", __FUNCTION__, remain_ch); ++ } ++ ++ ++ //call this after other things have been done ++#ifdef CONFIG_CONCURRENT_MODE ++ if(ATOMIC_READ(&pwdev_priv->ro_ch_to)==1 || ++ (remain_ch != pmlmeext->cur_channel)) ++ { ++ u8 co_channel = 0xff; ++ ATOMIC_SET(&pwdev_priv->ro_ch_to, 0); ++#endif ++ ++ if(ready_on_channel == _TRUE) ++ { ++ if ( !check_fwstate(&padapter->mlmepriv, _FW_LINKED ) ) ++ pmlmeext->cur_channel = remain_ch; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ co_channel = rtw_get_oper_ch(padapter); ++ ++ if(co_channel !=remain_ch) ++#endif ++ { ++ if (!padapter->mlmepriv.LinkDetectInfo.bBusyTraffic) ++ set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ } ++ DBG_8192C("%s, set ro ch timer, duration=%d\n", __func__, duration); ++ _set_timer( &pcfg80211_wdinfo->remain_on_ch_timer, duration); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ } ++#endif ++ ++ rtw_cfg80211_ready_on_channel(padapter, *cookie, channel, channel_type, duration, GFP_KERNEL); ++ ++exit: ++ if (err) ++ pcfg80211_wdinfo->is_ro_ch = _FALSE; ++ ++ return err; ++} ++ ++static s32 cfg80211_rtw_cancel_remain_on_channel(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ struct wireless_dev *wdev, ++#else ++ struct net_device *ndev, ++#endif ++ u64 cookie) ++{ ++ s32 err = 0; ++ _adapter *padapter = wiphy_to_adapter(wiphy); ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo; ++ ++ DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter)); ++ ++ if (pcfg80211_wdinfo->is_ro_ch == _TRUE) { ++ DBG_8192C("%s, cancel ro ch timer\n", __func__); ++ _cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer); ++ #ifdef CONFIG_CONCURRENT_MODE ++ ATOMIC_SET(&pwdev_priv->ro_ch_to, 1); ++ #endif ++ p2p_protocol_wk_hdl(padapter, P2P_RO_CH_WK); ++ } ++ ++ #if 0 ++ // Disable P2P Listen State ++ if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++ ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE); ++ _rtw_memset(pwdinfo, 0x00, sizeof(struct wifidirect_info)); ++ } ++ } ++ else ++ #endif ++ { ++ rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo)); ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo)); ++#endif ++ } ++ pcfg80211_wdinfo->is_ro_ch = _FALSE; ++ ++ return err; ++} ++ ++#endif //CONFIG_P2P ++ ++static int _cfg80211_rtw_mgmt_tx(_adapter *padapter, u8 tx_ch, const u8 *buf, size_t len) ++{ ++ struct xmit_frame *pmgntframe; ++ struct pkt_attrib *pattrib; ++ unsigned char *pframe; ++ int ret = _FAIL; ++ bool ack = _TRUE; ++ struct rtw_ieee80211_hdr *pwlanhdr; ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ //struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo; ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret = -EFAULT; ++ goto exit; ++ } ++ ++ rtw_set_scan_deny(padapter, 1000); ++ ++ rtw_scan_abort(padapter); ++ #ifdef CONFIG_CONCURRENT_MODE ++ if(rtw_buddy_adapter_up(padapter)) ++ rtw_scan_abort(padapter->pbuddy_adapter); ++ #endif /* CONFIG_CONCURRENT_MODE */ ++ ++ if (padapter->cfg80211_wdinfo.is_ro_ch == _TRUE) { ++ //DBG_8192C("%s, cancel ro ch timer\n", __func__); ++ //_cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer); ++ //padapter->cfg80211_wdinfo.is_ro_ch = _FALSE; ++ #ifdef CONFIG_CONCURRENT_MODE ++ if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED )) ++ { ++ DBG_8192C("%s, extend ro ch time\n", __func__); ++ _set_timer( &padapter->cfg80211_wdinfo.remain_on_ch_timer, pwdinfo->ext_listen_period); ++ } ++ #endif //CONFIG_CONCURRENT_MODE ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, _FW_LINKED )) { ++ u8 co_channel=0xff; ++ PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ co_channel = rtw_get_oper_ch(padapter); ++ ++ if (tx_ch != pbuddy_mlmeext->cur_channel) { ++ ++ u16 ext_listen_period; ++ ++ if (ATOMIC_READ(&pwdev_priv->switch_ch_to)==1) { ++ DBG_8192C("%s, issue nulldata pwrbit=1\n", __func__); ++ issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500); ++ ++ ATOMIC_SET(&pwdev_priv->switch_ch_to, 0); ++ ++ //DBG_8192C("%s, set switch ch timer, period=%d\n", __func__, pwdinfo->ext_listen_period); ++ //_set_timer(&pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_period); ++ } ++ ++ if (check_fwstate(&padapter->mlmepriv, _FW_LINKED )) ++ { ++ ext_listen_period = 500;// 500ms ++ } ++ else ++ { ++ ext_listen_period = pwdinfo->ext_listen_period; ++ } ++ ++ DBG_8192C("%s, set switch ch timer, period=%d\n", __func__, ext_listen_period); ++ _set_timer(&pwdinfo->ap_p2p_switch_timer, ext_listen_period); ++ ++ } ++ ++ if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED )) ++ pmlmeext->cur_channel = tx_ch; ++ ++ if (tx_ch != co_channel) ++ set_channel_bwmode(padapter, tx_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ }else ++#endif //CONFIG_CONCURRENT_MODE ++ //if (tx_ch != pmlmeext->cur_channel) { ++ if(tx_ch != rtw_get_oper_ch(padapter)) { ++ if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED )) ++ pmlmeext->cur_channel = tx_ch; ++ set_channel_bwmode(padapter, tx_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ ++ //starting alloc mgmt frame to dump it ++ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) ++ { ++ //ret = -ENOMEM; ++ ret = _FAIL; ++ goto exit; ++ } ++ ++ //update attribute ++ pattrib = &pmgntframe->attrib; ++ update_mgntframe_attrib(padapter, pattrib); ++ pattrib->retry_ctrl = _FALSE; ++ ++ _rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET); ++ ++ pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; ++ ++ _rtw_memcpy(pframe, (void*)buf, len); ++ pattrib->pktlen = len; ++ ++ pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; ++ //update seq number ++ pmlmeext->mgnt_seq = GetSequence(pwlanhdr); ++ pattrib->seqnum = pmlmeext->mgnt_seq; ++ pmlmeext->mgnt_seq++; ++ ++#ifdef CONFIG_WFD ++ { ++ struct wifi_display_info *pwfd_info; ++ ++ pwfd_info = padapter->wdinfo.wfd_info; ++ ++ if ( _TRUE == pwfd_info->wfd_enable ) ++ { ++ rtw_append_wfd_ie( padapter, pframe, &pattrib->pktlen ); ++ } ++ } ++#endif // CONFIG_WFD ++ ++ pattrib->last_txcmdsz = pattrib->pktlen; ++ ++ if (dump_mgntframe_and_wait_ack(padapter, pmgntframe) != _SUCCESS) ++ { ++ ack = _FALSE; ++ ret = _FAIL; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ack == _FAIL\n", __func__); ++ #endif ++ } ++ else ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ack=%d, ok!\n", __func__, ack); ++ #endif ++ ret = _SUCCESS; ++ } ++ ++exit: ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ret=%d\n", __func__, ret); ++ #endif ++ ++ return ret; ++ ++} ++ ++static int cfg80211_rtw_mgmt_tx(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0)) ++ struct wireless_dev *wdev, ++#else ++ struct net_device *ndev, ++#endif ++ struct ieee80211_channel *chan, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ bool offchan, ++#endif ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++ enum nl80211_channel_type channel_type, ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ bool channel_type_valid, ++ #endif ++#endif ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ unsigned int wait, ++#endif ++ const u8 *buf, size_t len, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) ++ bool no_cck, ++#endif ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)) ++ bool dont_wait_for_ack, ++#endif ++ u64 *cookie) ++{ ++ _adapter *padapter = (_adapter *)wiphy_to_adapter(wiphy); ++ struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); ++ int ret = 0; ++ int tx_ret; ++ u32 dump_limit = RTW_MAX_MGMT_TX_CNT; ++ u32 dump_cnt = 0; ++ bool ack = _TRUE; ++ u8 tx_ch = (u8)ieee80211_frequency_to_channel(chan->center_freq); ++ u8 category, action; ++ int type = (-1); ++ u32 start = rtw_get_current_time(); ++ ++ /* cookie generation */ ++ *cookie = (unsigned long) buf; ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X(FUNC_ADPT_FMT" len=%zu, ch=%d" ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++ ", ch_type=%d" ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ ", channel_type_valid=%d" ++ #endif ++ #endif ++ "\n", FUNC_ADPT_ARG(padapter), ++ len, tx_ch ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)) ++ , channel_type ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ , channel_type_valid ++ #endif ++ #endif ++ ); ++#endif /* CONFIG_DEBUG_CFG80211 */ ++ ++ /* indicate ack before issue frame to avoid racing with rsp frame */ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ rtw_cfg80211_mgmt_tx_status(padapter, *cookie, buf, len, ack, GFP_KERNEL); ++#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,34) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,35)) ++ cfg80211_action_tx_status(ndev, *cookie, buf, len, ack, GFP_KERNEL); ++#endif ++ ++ if (rtw_action_frame_parse(buf, len, &category, &action) == _FALSE) { ++ DBG_8192C(FUNC_ADPT_FMT" frame_control:0x%x\n", FUNC_ADPT_ARG(padapter), ++ le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)buf)->frame_ctl)); ++ goto exit; ++ } ++ ++ DBG_8192C("RTW_Tx:tx_ch=%d, da="MAC_FMT"\n", tx_ch, MAC_ARG(GetAddr1Ptr(buf))); ++ #ifdef CONFIG_P2P ++ if((type = rtw_p2p_check_frames(padapter, buf, len, _TRUE)) >= 0) { ++ goto dump; ++ } ++ #endif ++ if (category == RTW_WLAN_CATEGORY_PUBLIC) ++ DBG_871X("RTW_Tx:%s\n", action_public_str(action)); ++ else ++ DBG_871X("RTW_Tx:category(%u), action(%u)\n", category, action); ++ ++dump: ++ do { ++ dump_cnt++; ++ tx_ret = _cfg80211_rtw_mgmt_tx(padapter, tx_ch, buf, len); ++ } while (dump_cnt < dump_limit && tx_ret != _SUCCESS); ++ ++ if (tx_ret != _SUCCESS || dump_cnt > 1) { ++ DBG_871X(FUNC_ADPT_FMT" %s (%d/%d) in %d ms\n", FUNC_ADPT_ARG(padapter), ++ tx_ret==_SUCCESS?"OK":"FAIL", dump_cnt, dump_limit, rtw_get_passing_time_ms(start)); ++ } ++ ++ switch (type) { ++ case P2P_GO_NEGO_CONF: ++ rtw_clear_scan_deny(padapter); ++ break; ++ case P2P_INVIT_RESP: ++ if (pwdev_priv->invit_info.flags & BIT(0) ++ && pwdev_priv->invit_info.status == 0) ++ { ++ DBG_871X(FUNC_ADPT_FMT" agree with invitation of persistent group\n", ++ FUNC_ADPT_ARG(padapter)); ++ rtw_set_scan_deny(padapter, 5000); ++ rtw_pwr_wakeup_ex(padapter, 5000); ++ rtw_clear_scan_deny(padapter); ++ } ++ break; ++ } ++ ++exit: ++ return ret; ++} ++ ++static void cfg80211_rtw_mgmt_frame_register(struct wiphy *wiphy, ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)) ++ struct wireless_dev *wdev, ++#else ++ struct net_device *ndev, ++#endif ++ u16 frame_type, bool reg) ++{ ++ _adapter *adapter = wiphy_to_adapter(wiphy); ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_871X(FUNC_ADPT_FMT" frame_type:%x, reg:%d\n", FUNC_ADPT_ARG(adapter), ++ frame_type, reg); ++#endif ++ ++ if (frame_type != (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ)) ++ return; ++ ++ return; ++} ++ ++static int rtw_cfg80211_set_beacon_wpsp2pie(struct net_device *ndev, char *buf, int len) ++{ ++ int ret = 0; ++ uint wps_ielen = 0; ++ u8 *wps_ie; ++ u32 p2p_ielen = 0; ++ u8 wps_oui[8]={0x0,0x50,0xf2,0x04}; ++ u8 *p2p_ie; ++ u32 wfd_ielen = 0; ++ u8 *wfd_ie; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ ++ DBG_871X(FUNC_NDEV_FMT" ielen=%d\n", FUNC_NDEV_ARG(ndev), len); ++ ++ if(len>0) ++ { ++ if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen))) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("bcn_wps_ielen=%d\n", wps_ielen); ++ #endif ++ ++ if(pmlmepriv->wps_beacon_ie) ++ { ++ u32 free_len = pmlmepriv->wps_beacon_ie_len; ++ pmlmepriv->wps_beacon_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_beacon_ie, free_len); ++ pmlmepriv->wps_beacon_ie = NULL; ++ } ++ ++ pmlmepriv->wps_beacon_ie = rtw_malloc(wps_ielen); ++ if ( pmlmepriv->wps_beacon_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ ++ _rtw_memcpy(pmlmepriv->wps_beacon_ie, wps_ie, wps_ielen); ++ pmlmepriv->wps_beacon_ie_len = wps_ielen; ++ ++ update_beacon(padapter, _VENDOR_SPECIFIC_IE_, wps_oui, _TRUE); ++ ++ } ++ ++ //buf += wps_ielen; ++ //len -= wps_ielen; ++ ++ #ifdef CONFIG_P2P ++ if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen))) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("bcn_p2p_ielen=%d\n", p2p_ielen); ++ #endif ++ ++ if(pmlmepriv->p2p_beacon_ie) ++ { ++ u32 free_len = pmlmepriv->p2p_beacon_ie_len; ++ pmlmepriv->p2p_beacon_ie_len = 0; ++ rtw_mfree(pmlmepriv->p2p_beacon_ie, free_len); ++ pmlmepriv->p2p_beacon_ie = NULL; ++ } ++ ++ pmlmepriv->p2p_beacon_ie = rtw_malloc(p2p_ielen); ++ if ( pmlmepriv->p2p_beacon_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ ++ _rtw_memcpy(pmlmepriv->p2p_beacon_ie, p2p_ie, p2p_ielen); ++ pmlmepriv->p2p_beacon_ie_len = p2p_ielen; ++ ++ } ++ #endif //CONFIG_P2P ++ ++ //buf += p2p_ielen; ++ //len -= p2p_ielen; ++ ++ #ifdef CONFIG_WFD ++ if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("bcn_wfd_ielen=%d\n", wfd_ielen); ++ #endif ++ ++ if(pmlmepriv->wfd_beacon_ie) ++ { ++ u32 free_len = pmlmepriv->wfd_beacon_ie_len; ++ pmlmepriv->wfd_beacon_ie_len = 0; ++ rtw_mfree(pmlmepriv->wfd_beacon_ie, free_len); ++ pmlmepriv->wfd_beacon_ie = NULL; ++ } ++ ++ pmlmepriv->wfd_beacon_ie = rtw_malloc(wfd_ielen); ++ if ( pmlmepriv->wfd_beacon_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_beacon_ie, &pmlmepriv->wfd_beacon_ie_len); ++ } ++ #endif //CONFIG_WFD ++ ++ pmlmeext->bstart_bss = _TRUE; ++ ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_cfg80211_set_probe_resp_wpsp2pie(struct net_device *net, char *buf, int len) ++{ ++ int ret = 0; ++ uint wps_ielen = 0; ++ u8 *wps_ie; ++ u32 p2p_ielen = 0; ++ u8 *p2p_ie; ++ u32 wfd_ielen = 0; ++ u8 *wfd_ie; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(net); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ielen=%d\n", __func__, len); ++#endif ++ ++ if(len>0) ++ { ++ if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen))) ++ { ++ uint attr_contentlen = 0; ++ u16 uconfig_method, *puconfig_method = NULL; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_resp_wps_ielen=%d\n", wps_ielen); ++ #endif ++ ++ if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) ++ { ++ u8 sr = 0; ++ rtw_get_wps_attr_content(wps_ie, wps_ielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL); ++ ++ if (sr != 0) ++ { ++ DBG_871X("%s, got sr\n", __func__); ++ } ++ else ++ { ++ DBG_8192C("GO mode process WPS under site-survey, sr no set\n"); ++ return ret; ++ } ++ } ++ ++ if(pmlmepriv->wps_probe_resp_ie) ++ { ++ u32 free_len = pmlmepriv->wps_probe_resp_ie_len; ++ pmlmepriv->wps_probe_resp_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_probe_resp_ie, free_len); ++ pmlmepriv->wps_probe_resp_ie = NULL; ++ } ++ ++ pmlmepriv->wps_probe_resp_ie = rtw_malloc(wps_ielen); ++ if ( pmlmepriv->wps_probe_resp_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ ++ //add PUSH_BUTTON config_method by driver self in wpsie of probe_resp at GO Mode ++ if ( (puconfig_method = (u16*)rtw_get_wps_attr_content( wps_ie, wps_ielen, WPS_ATTR_CONF_METHOD , NULL, &attr_contentlen)) != NULL ) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ //printk("config_method in wpsie of probe_resp = 0x%x\n", be16_to_cpu(*puconfig_method)); ++ #endif ++ ++ uconfig_method = WPS_CM_PUSH_BUTTON; ++ uconfig_method = cpu_to_be16( uconfig_method ); ++ ++ *puconfig_method |= uconfig_method; ++ } ++ ++ _rtw_memcpy(pmlmepriv->wps_probe_resp_ie, wps_ie, wps_ielen); ++ pmlmepriv->wps_probe_resp_ie_len = wps_ielen; ++ ++ } ++ ++ //buf += wps_ielen; ++ //len -= wps_ielen; ++ ++ #ifdef CONFIG_P2P ++ if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen))) ++ { ++ u8 is_GO = _FALSE; ++ u32 attr_contentlen = 0; ++ u16 cap_attr=0; ++ ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_resp_p2p_ielen=%d\n", p2p_ielen); ++ #endif ++ ++ //Check P2P Capability ATTR ++ if( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*) &attr_contentlen) ) ++ { ++ u8 grp_cap=0; ++ //DBG_8192C( "[%s] Got P2P Capability Attr!!\n", __FUNCTION__ ); ++ cap_attr = le16_to_cpu(cap_attr); ++ grp_cap = (u8)((cap_attr >> 8)&0xff); ++ ++ is_GO = (grp_cap&BIT(0)) ? _TRUE:_FALSE; ++ ++ if(is_GO) ++ DBG_8192C("Got P2P Capability Attr, grp_cap=0x%x, is_GO\n", grp_cap); ++ } ++ ++ ++ if(is_GO == _FALSE) ++ { ++ if(pmlmepriv->p2p_probe_resp_ie) ++ { ++ u32 free_len = pmlmepriv->p2p_probe_resp_ie_len; ++ pmlmepriv->p2p_probe_resp_ie_len = 0; ++ rtw_mfree(pmlmepriv->p2p_probe_resp_ie, free_len); ++ pmlmepriv->p2p_probe_resp_ie = NULL; ++ } ++ ++ pmlmepriv->p2p_probe_resp_ie = rtw_malloc(p2p_ielen); ++ if ( pmlmepriv->p2p_probe_resp_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ _rtw_memcpy(pmlmepriv->p2p_probe_resp_ie, p2p_ie, p2p_ielen); ++ pmlmepriv->p2p_probe_resp_ie_len = p2p_ielen; ++ } ++ else ++ { ++ if(pmlmepriv->p2p_go_probe_resp_ie) ++ { ++ u32 free_len = pmlmepriv->p2p_go_probe_resp_ie_len; ++ pmlmepriv->p2p_go_probe_resp_ie_len = 0; ++ rtw_mfree(pmlmepriv->p2p_go_probe_resp_ie, free_len); ++ pmlmepriv->p2p_go_probe_resp_ie = NULL; ++ } ++ ++ pmlmepriv->p2p_go_probe_resp_ie = rtw_malloc(p2p_ielen); ++ if ( pmlmepriv->p2p_go_probe_resp_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ _rtw_memcpy(pmlmepriv->p2p_go_probe_resp_ie, p2p_ie, p2p_ielen); ++ pmlmepriv->p2p_go_probe_resp_ie_len = p2p_ielen; ++ } ++ ++ } ++ #endif //CONFIG_P2P ++ ++ //buf += p2p_ielen; ++ //len -= p2p_ielen; ++ ++ #ifdef CONFIG_WFD ++ if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) ++ { ++ #ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("probe_resp_wfd_ielen=%d\n", wfd_ielen); ++ #endif ++ ++ if(pmlmepriv->wfd_probe_resp_ie) ++ { ++ u32 free_len = pmlmepriv->wfd_probe_resp_ie_len; ++ pmlmepriv->wfd_probe_resp_ie_len = 0; ++ rtw_mfree(pmlmepriv->wfd_probe_resp_ie, free_len); ++ pmlmepriv->wfd_probe_resp_ie = NULL; ++ } ++ ++ pmlmepriv->wfd_probe_resp_ie = rtw_malloc(wfd_ielen); ++ if ( pmlmepriv->wfd_probe_resp_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_probe_resp_ie, &pmlmepriv->wfd_probe_resp_ie_len); ++ } ++ #endif //CONFIG_WFD ++ ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_cfg80211_set_assoc_resp_wpsp2pie(struct net_device *net, char *buf, int len) ++{ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(net); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ DBG_8192C("%s, ielen=%d\n", __func__, len); ++ ++ if(len>0) ++ { ++ if(pmlmepriv->wps_assoc_resp_ie) ++ { ++ u32 free_len = pmlmepriv->wps_assoc_resp_ie_len; ++ pmlmepriv->wps_assoc_resp_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_assoc_resp_ie, free_len); ++ pmlmepriv->wps_assoc_resp_ie = NULL; ++ } ++ ++ pmlmepriv->wps_assoc_resp_ie = rtw_malloc(len); ++ if ( pmlmepriv->wps_assoc_resp_ie == NULL) { ++ DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ ++ } ++ _rtw_memcpy(pmlmepriv->wps_assoc_resp_ie, buf, len); ++ pmlmepriv->wps_assoc_resp_ie_len = len; ++ } ++ ++ return ret; ++ ++} ++ ++int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net, char *buf, int len, ++ int type) ++{ ++ int ret = 0; ++ uint wps_ielen = 0; ++ u32 p2p_ielen = 0; ++ ++#ifdef CONFIG_DEBUG_CFG80211 ++ DBG_8192C("%s, ielen=%d\n", __func__, len); ++#endif ++ ++ if( (rtw_get_wps_ie(buf, len, NULL, &wps_ielen) && (wps_ielen>0)) ++ #ifdef CONFIG_P2P ++ || (rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen) && (p2p_ielen>0)) ++ #endif ++ ) ++ { ++ if (net != NULL) ++ { ++ switch (type) ++ { ++ case 0x1: //BEACON ++ ret = rtw_cfg80211_set_beacon_wpsp2pie(net, buf, len); ++ break; ++ case 0x2: //PROBE_RESP ++ ret = rtw_cfg80211_set_probe_resp_wpsp2pie(net, buf, len); ++ break; ++ case 0x4: //ASSOC_RESP ++ ret = rtw_cfg80211_set_assoc_resp_wpsp2pie(net, buf, len); ++ break; ++ } ++ } ++ } ++ ++ return ret; ++ ++} ++ ++static struct cfg80211_ops rtw_cfg80211_ops = { ++ .change_virtual_intf = cfg80211_rtw_change_iface, ++ .add_key = cfg80211_rtw_add_key, ++ .get_key = cfg80211_rtw_get_key, ++ .del_key = cfg80211_rtw_del_key, ++ .set_default_key = cfg80211_rtw_set_default_key, ++ .get_station = cfg80211_rtw_get_station, ++ .scan = cfg80211_rtw_scan, ++ .set_wiphy_params = cfg80211_rtw_set_wiphy_params, ++ .connect = cfg80211_rtw_connect, ++ .disconnect = cfg80211_rtw_disconnect, ++ .join_ibss = cfg80211_rtw_join_ibss, ++ .leave_ibss = cfg80211_rtw_leave_ibss, ++ .set_tx_power = cfg80211_rtw_set_txpower, ++ .get_tx_power = cfg80211_rtw_get_txpower, ++ .set_power_mgmt = cfg80211_rtw_set_power_mgmt, ++ .set_pmksa = cfg80211_rtw_set_pmksa, ++ .del_pmksa = cfg80211_rtw_del_pmksa, ++ .flush_pmksa = cfg80211_rtw_flush_pmksa, ++ ++#ifdef CONFIG_AP_MODE ++ .add_virtual_intf = cfg80211_rtw_add_virtual_intf, ++ .del_virtual_intf = cfg80211_rtw_del_virtual_intf, ++ ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 4, 0)) && !defined(COMPAT_KERNEL_RELEASE) ++ .add_beacon = cfg80211_rtw_add_beacon, ++ .set_beacon = cfg80211_rtw_set_beacon, ++ .del_beacon = cfg80211_rtw_del_beacon, ++ #else ++ .start_ap = cfg80211_rtw_start_ap, ++ .change_beacon = cfg80211_rtw_change_beacon, ++ .stop_ap = cfg80211_rtw_stop_ap, ++ #endif ++ ++ .add_station = cfg80211_rtw_add_station, ++ .del_station = cfg80211_rtw_del_station, ++ .change_station = cfg80211_rtw_change_station, ++ .dump_station = cfg80211_rtw_dump_station, ++ .change_bss = cfg80211_rtw_change_bss, ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0)) ++ .set_channel = cfg80211_rtw_set_channel, ++ #endif ++ //.auth = cfg80211_rtw_auth, ++ //.assoc = cfg80211_rtw_assoc, ++#endif //CONFIG_AP_MODE ++ ++#ifdef CONFIG_P2P ++ .remain_on_channel = cfg80211_rtw_remain_on_channel, ++ .cancel_remain_on_channel = cfg80211_rtw_cancel_remain_on_channel, ++#endif ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++ .mgmt_tx = cfg80211_rtw_mgmt_tx, ++ .mgmt_frame_register = cfg80211_rtw_mgmt_frame_register, ++#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,34) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,35)) ++ .action = cfg80211_rtw_mgmt_tx, ++#endif ++}; ++ ++static void rtw_cfg80211_init_ht_capab(struct ieee80211_sta_ht_cap *ht_cap, enum ieee80211_band band, u8 rf_type) ++{ ++ ++#define MAX_BIT_RATE_40MHZ_MCS15 300 /* Mbps */ ++#define MAX_BIT_RATE_40MHZ_MCS7 150 /* Mbps */ ++ ++ ht_cap->ht_supported = _TRUE; ++ ++ ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | ++ IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20 | ++ IEEE80211_HT_CAP_DSSSCCK40 | IEEE80211_HT_CAP_MAX_AMSDU; ++ ++ /* ++ *Maximum length of AMPDU that the STA can receive. ++ *Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) ++ */ ++ ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; ++ ++ /*Minimum MPDU start spacing , */ ++ ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; ++ ++ ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; ++ ++ /* ++ *hw->wiphy->bands[IEEE80211_BAND_2GHZ] ++ *base on ant_num ++ *rx_mask: RX mask ++ *if rx_ant =1 rx_mask[0]=0xff;==>MCS0-MCS7 ++ *if rx_ant =2 rx_mask[1]=0xff;==>MCS8-MCS15 ++ *if rx_ant >=3 rx_mask[2]=0xff; ++ *if BW_40 rx_mask[4]=0x01; ++ *highest supported RX rate ++ */ ++ if(rf_type == RF_1T1R) ++ { ++ ht_cap->mcs.rx_mask[0] = 0xFF; ++ ht_cap->mcs.rx_mask[1] = 0x00; ++ ht_cap->mcs.rx_mask[4] = 0x01; ++ ++ ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS7; ++ } ++ else if((rf_type == RF_1T2R) || (rf_type==RF_2T2R)) ++ { ++ ht_cap->mcs.rx_mask[0] = 0xFF; ++ ht_cap->mcs.rx_mask[1] = 0xFF; ++ ht_cap->mcs.rx_mask[4] = 0x01; ++ ++ ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS15; ++ } ++ else ++ { ++ DBG_8192C("%s, error rf_type=%d\n", __func__, rf_type); ++ } ++ ++} ++ ++void rtw_cfg80211_init_wiphy(_adapter *padapter) ++{ ++ u8 rf_type; ++ struct ieee80211_supported_band *bands; ++ struct wireless_dev *pwdev = padapter->rtw_wdev; ++ struct wiphy *wiphy = pwdev->wiphy; ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ DBG_8192C("%s:rf_type=%d\n", __func__, rf_type); ++ ++ /* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */ ++ { ++ bands = wiphy->bands[IEEE80211_BAND_2GHZ]; ++ if(bands) ++ rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_2GHZ, rf_type); ++ } ++ ++ /* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */ ++ { ++ bands = wiphy->bands[IEEE80211_BAND_5GHZ]; ++ if(bands) ++ rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_5GHZ, rf_type); ++ } ++} ++ ++/* ++struct ieee80211_iface_limit rtw_limits[] = { ++ { .max = 1, .types = BIT(NL80211_IFTYPE_STATION) ++ | BIT(NL80211_IFTYPE_ADHOC) ++#ifdef CONFIG_AP_MODE ++ | BIT(NL80211_IFTYPE_AP) ++#endif ++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)) ++ | BIT(NL80211_IFTYPE_P2P_CLIENT) ++ | BIT(NL80211_IFTYPE_P2P_GO) ++#endif ++ }, ++ {.max = 1, .types = BIT(NL80211_IFTYPE_MONITOR)}, ++}; ++ ++struct ieee80211_iface_combination rtw_combinations = { ++ .limits = rtw_limits, ++ .n_limits = ARRAY_SIZE(rtw_limits), ++ .max_interfaces = 2, ++ .num_different_channels = 1, ++}; ++*/ ++ ++static void rtw_cfg80211_preinit_wiphy(_adapter *padapter, struct wiphy *wiphy) ++{ ++ ++ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; ++ ++ wiphy->max_scan_ssids = RTW_SSID_SCAN_AMOUNT; ++ wiphy->max_scan_ie_len = RTW_SCAN_IE_LEN_MAX; ++ wiphy->max_num_pmkids = RTW_MAX_NUM_PMKIDS; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) ++ wiphy->max_remain_on_channel_duration = RTW_MAX_REMAIN_ON_CHANNEL_DURATION; ++#endif ++ ++ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) ++ | BIT(NL80211_IFTYPE_ADHOC) ++#ifdef CONFIG_AP_MODE ++ | BIT(NL80211_IFTYPE_AP) ++ | BIT(NL80211_IFTYPE_MONITOR) ++#endif ++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)) ++ | BIT(NL80211_IFTYPE_P2P_CLIENT) ++ | BIT(NL80211_IFTYPE_P2P_GO) ++#endif ++ ; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) ++#ifdef CONFIG_AP_MODE ++ wiphy->mgmt_stypes = rtw_cfg80211_default_mgmt_stypes; ++#endif //CONFIG_AP_MODE ++#endif ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0)) ++ wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR); ++#endif ++ ++ /* ++ wiphy->iface_combinations = &rtw_combinations; ++ wiphy->n_iface_combinations = 1; ++ */ ++ ++ wiphy->cipher_suites = rtw_cipher_suites; ++ wiphy->n_cipher_suites = ARRAY_SIZE(rtw_cipher_suites); ++ ++ /* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */ ++ wiphy->bands[IEEE80211_BAND_2GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_2GHZ); ++ /* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */ ++ wiphy->bands[IEEE80211_BAND_5GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_5GHZ); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) && LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)) ++ wiphy->flags |= WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS; ++#endif ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)) ++ wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; ++ wiphy->flags |= WIPHY_FLAG_OFFCHAN_TX | WIPHY_FLAG_HAVE_AP_SME; ++#endif ++ ++ if(padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE) ++ wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; ++ else ++ wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; ++} ++ ++int rtw_wdev_alloc(_adapter *padapter, struct device *dev) ++{ ++ int ret = 0; ++ struct wiphy *wiphy; ++ struct wireless_dev *wdev; ++ struct rtw_wdev_priv *pwdev_priv; ++ struct net_device *pnetdev = padapter->pnetdev; ++ ++ DBG_8192C("%s(padapter=%p)\n", __func__, padapter); ++ ++ /* wiphy */ ++ wiphy = wiphy_new(&rtw_cfg80211_ops, sizeof(struct rtw_wdev_priv)); ++ if (!wiphy) { ++ DBG_8192C("Couldn't allocate wiphy device\n"); ++ ret = -ENOMEM; ++ goto exit; ++ } ++ set_wiphy_dev(wiphy, dev); ++ rtw_cfg80211_preinit_wiphy(padapter, wiphy); ++ ++ ret = wiphy_register(wiphy); ++ if (ret < 0) { ++ DBG_8192C("Couldn't register wiphy device\n"); ++ goto free_wiphy; ++ } ++ ++ /* wdev */ ++ wdev = (struct wireless_dev *)rtw_zmalloc(sizeof(struct wireless_dev)); ++ if (!wdev) { ++ DBG_8192C("Couldn't allocate wireless device\n"); ++ ret = -ENOMEM; ++ goto unregister_wiphy; ++ } ++ wdev->wiphy = wiphy; ++ wdev->netdev = pnetdev; ++ //wdev->iftype = NL80211_IFTYPE_STATION; ++ wdev->iftype = NL80211_IFTYPE_MONITOR; // for rtw_setopmode_cmd() in cfg80211_rtw_change_iface() ++ padapter->rtw_wdev = wdev; ++ pnetdev->ieee80211_ptr = wdev; ++ ++ //init pwdev_priv ++ pwdev_priv = wdev_to_priv(wdev); ++ pwdev_priv->rtw_wdev = wdev; ++ pwdev_priv->pmon_ndev = NULL; ++ pwdev_priv->ifname_mon[0] = '\0'; ++ pwdev_priv->padapter = padapter; ++ pwdev_priv->scan_request = NULL; ++ _rtw_spinlock_init(&pwdev_priv->scan_req_lock); ++ ++ pwdev_priv->p2p_enabled = _FALSE; ++ pwdev_priv->provdisc_req_issued = _FALSE; ++ rtw_wdev_invit_info_init(&pwdev_priv->invit_info); ++ rtw_wdev_nego_info_init(&pwdev_priv->nego_info); ++ ++ pwdev_priv->bandroid_scan = _FALSE; ++ ++ if(padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE) ++ pwdev_priv->power_mgmt = _TRUE; ++ else ++ pwdev_priv->power_mgmt = _FALSE; ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ATOMIC_SET(&pwdev_priv->switch_ch_to, 1); ++ ATOMIC_SET(&pwdev_priv->ro_ch_to, 1); ++#endif ++ ++ return ret; ++ ++ rtw_mfree((u8*)wdev, sizeof(struct wireless_dev)); ++unregister_wiphy: ++ wiphy_unregister(wiphy); ++ free_wiphy: ++ wiphy_free(wiphy); ++exit: ++ return ret; ++ ++} ++ ++void rtw_wdev_free(struct wireless_dev *wdev) ++{ ++ struct rtw_wdev_priv *pwdev_priv; ++ ++ DBG_8192C("%s(wdev=%p)\n", __func__, wdev); ++ ++ if (!wdev) ++ return; ++ ++ pwdev_priv = wdev_to_priv(wdev); ++ ++ rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_2GHZ]); ++ rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_5GHZ]); ++ ++ wiphy_free(wdev->wiphy); ++ ++ rtw_mfree((u8*)wdev, sizeof(struct wireless_dev)); ++} ++ ++void rtw_wdev_unregister(struct wireless_dev *wdev) ++{ ++ struct rtw_wdev_priv *pwdev_priv; ++ ++ DBG_8192C("%s(wdev=%p)\n", __func__, wdev); ++ ++ if (!wdev) ++ return; ++ ++ pwdev_priv = wdev_to_priv(wdev); ++ ++ rtw_cfg80211_indicate_scan_done(pwdev_priv, _TRUE); ++ ++ if (pwdev_priv->pmon_ndev) { ++ DBG_8192C("%s, unregister monitor interface\n", __func__); ++ unregister_netdev(pwdev_priv->pmon_ndev); ++ } ++ ++ wiphy_unregister(wdev->wiphy); ++} ++ ++#endif //CONFIG_IOCTL_CFG80211 +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c +new file mode 100644 +index 000000000000..865f57f222e2 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c +@@ -0,0 +1,11908 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _IOCTL_LINUX_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++//#ifdef CONFIG_MP_INCLUDED ++#include ++//#endif ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif //CONFIG_USB_HCI ++#include ++ ++#ifdef CONFIG_MP_INCLUDED ++#include ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27)) ++#define iwe_stream_add_event(a, b, c, d, e) iwe_stream_add_event(b, c, d, e) ++#define iwe_stream_add_point(a, b, c, d, e) iwe_stream_add_point(b, c, d, e) ++#endif ++ ++ ++#define RTL_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 ++ ++#define SCAN_ITEM_SIZE 768 ++#define MAX_CUSTOM_LEN 64 ++#define RATE_COUNT 4 ++ ++#ifdef CONFIG_GLOBAL_UI_PID ++extern int ui_pid[3]; ++#endif ++ ++// combo scan ++#define WEXT_CSCAN_AMOUNT 9 ++#define WEXT_CSCAN_BUF_LEN 360 ++#define WEXT_CSCAN_HEADER "CSCAN S\x01\x00\x00S\x00" ++#define WEXT_CSCAN_HEADER_SIZE 12 ++#define WEXT_CSCAN_SSID_SECTION 'S' ++#define WEXT_CSCAN_CHANNEL_SECTION 'C' ++#define WEXT_CSCAN_NPROBE_SECTION 'N' ++#define WEXT_CSCAN_ACTV_DWELL_SECTION 'A' ++#define WEXT_CSCAN_PASV_DWELL_SECTION 'P' ++#define WEXT_CSCAN_HOME_DWELL_SECTION 'H' ++#define WEXT_CSCAN_TYPE_SECTION 'T' ++ ++ ++extern u8 key_2char2num(u8 hch, u8 lch); ++extern u8 str_2char2num(u8 hch, u8 lch); ++extern u8 convert_ip_addr(u8 hch, u8 mch, u8 lch); ++ ++u32 rtw_rates[] = {1000000,2000000,5500000,11000000, ++ 6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000}; ++ ++static const char * const iw_operation_mode[] = ++{ ++ "Auto", "Ad-Hoc", "Managed", "Master", "Repeater", "Secondary", "Monitor" ++}; ++ ++static int hex2num_i(char c) ++{ ++ if (c >= '0' && c <= '9') ++ return c - '0'; ++ if (c >= 'a' && c <= 'f') ++ return c - 'a' + 10; ++ if (c >= 'A' && c <= 'F') ++ return c - 'A' + 10; ++ return -1; ++} ++ ++static int hex2byte_i(const char *hex) ++{ ++ int a, b; ++ a = hex2num_i(*hex++); ++ if (a < 0) ++ return -1; ++ b = hex2num_i(*hex++); ++ if (b < 0) ++ return -1; ++ return (a << 4) | b; ++} ++ ++/** ++ * hwaddr_aton - Convert ASCII string to MAC address ++ * @txt: MAC address as a string (e.g., "00:11:22:33:44:55") ++ * @addr: Buffer for the MAC address (ETH_ALEN = 6 bytes) ++ * Returns: 0 on success, -1 on failure (e.g., string not a MAC address) ++ */ ++static int hwaddr_aton_i(const char *txt, u8 *addr) ++{ ++ int i; ++ ++ for (i = 0; i < 6; i++) { ++ int a, b; ++ ++ a = hex2num_i(*txt++); ++ if (a < 0) ++ return -1; ++ b = hex2num_i(*txt++); ++ if (b < 0) ++ return -1; ++ *addr++ = (a << 4) | b; ++ if (i < 5 && *txt++ != ':') ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static void indicate_wx_custom_event(_adapter *padapter, char *msg) ++{ ++#ifndef CONFIG_IOCTL_CFG80211 ++ u8 *buff, *p; ++ union iwreq_data wrqu; ++ ++ if ((u32)strlen(msg) > IW_CUSTOM_MAX) { ++ DBG_871X("%s strlen(msg):%u > IW_CUSTOM_MAX:%u\n", __FUNCTION__ ,(u32)strlen(msg), IW_CUSTOM_MAX); ++ return; ++ } ++ ++ buff = rtw_zmalloc(IW_CUSTOM_MAX+1); ++ if(!buff) ++ return; ++ ++ _rtw_memcpy(buff, msg, strlen(msg)); ++ ++ _rtw_memset(&wrqu,0,sizeof(wrqu)); ++ wrqu.data.length = strlen(msg); ++ ++ DBG_871X("%s %s\n", __FUNCTION__, buff); ++ wireless_send_event(padapter->pnetdev, IWEVCUSTOM, &wrqu, buff); ++ ++ rtw_mfree(buff, IW_CUSTOM_MAX+1); ++#endif ++} ++ ++ ++static void request_wps_pbc_event(_adapter *padapter) ++{ ++#ifndef CONFIG_IOCTL_CFG80211 ++ u8 *buff, *p; ++ union iwreq_data wrqu; ++ ++ buff = rtw_malloc(IW_CUSTOM_MAX); ++ if(!buff) ++ return; ++ ++ _rtw_memset(buff, 0, IW_CUSTOM_MAX); ++ ++ p=buff; ++ ++ p+=sprintf(p, "WPS_PBC_START.request=TRUE"); ++ ++ _rtw_memset(&wrqu,0,sizeof(wrqu)); ++ ++ wrqu.data.length = p-buff; ++ ++ wrqu.data.length = (wrqu.data.lengthpnetdev, IWEVCUSTOM, &wrqu, buff); ++ ++ if(buff) ++ { ++ rtw_mfree(buff, IW_CUSTOM_MAX); ++ } ++#endif ++} ++ ++ ++void indicate_wx_scan_complete_event(_adapter *padapter) ++{ ++#ifndef CONFIG_IOCTL_CFG80211 ++ union iwreq_data wrqu; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ _rtw_memset(&wrqu, 0, sizeof(union iwreq_data)); ++ ++ //DBG_871X("+rtw_indicate_wx_scan_complete_event\n"); ++ wireless_send_event(padapter->pnetdev, SIOCGIWSCAN, &wrqu, NULL); ++#endif ++} ++ ++ ++void rtw_indicate_wx_assoc_event(_adapter *padapter) ++{ ++#ifndef CONFIG_IOCTL_CFG80211 ++ union iwreq_data wrqu; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ _rtw_memset(&wrqu, 0, sizeof(union iwreq_data)); ++ ++ wrqu.ap_addr.sa_family = ARPHRD_ETHER; ++ ++ _rtw_memcpy(wrqu.ap_addr.sa_data, pmlmepriv->cur_network.network.MacAddress, ETH_ALEN); ++ ++ //DBG_871X("+rtw_indicate_wx_assoc_event\n"); ++ wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL); ++#endif ++} ++ ++void rtw_indicate_wx_disassoc_event(_adapter *padapter) ++{ ++#ifndef CONFIG_IOCTL_CFG80211 ++ union iwreq_data wrqu; ++ ++ _rtw_memset(&wrqu, 0, sizeof(union iwreq_data)); ++ ++ wrqu.ap_addr.sa_family = ARPHRD_ETHER; ++ _rtw_memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); ++ ++ //DBG_871X("+rtw_indicate_wx_disassoc_event\n"); ++ wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL); ++#endif ++} ++ ++/* ++uint rtw_is_cckrates_included(u8 *rate) ++{ ++ u32 i = 0; ++ ++ while(rate[i]!=0) ++ { ++ if ( (((rate[i]) & 0x7f) == 2) || (((rate[i]) & 0x7f) == 4) || ++ (((rate[i]) & 0x7f) == 11) || (((rate[i]) & 0x7f) == 22) ) ++ return _TRUE; ++ i++; ++ } ++ ++ return _FALSE; ++} ++ ++uint rtw_is_cckratesonly_included(u8 *rate) ++{ ++ u32 i = 0; ++ ++ while(rate[i]!=0) ++ { ++ if ( (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) && ++ (((rate[i]) & 0x7f) != 11) && (((rate[i]) & 0x7f) != 22) ) ++ return _FALSE; ++ i++; ++ } ++ ++ return _TRUE; ++} ++*/ ++ ++static char *translate_scan(_adapter *padapter, ++ struct iw_request_info* info, struct wlan_network *pnetwork, ++ char *start, char *stop) ++{ ++ struct iw_event iwe; ++ u16 cap; ++ u32 ht_ielen = 0; ++ char custom[MAX_CUSTOM_LEN]; ++ char *p; ++ u16 max_rate=0, rate, ht_cap=_FALSE; ++ u32 i = 0; ++ char *current_val; ++ long rssi; ++ u8 bw_40MHz=0, short_GI=0; ++ u16 mcs_rate=0; ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_P2P ++#ifdef CONFIG_WFD ++ if ( SCAN_RESULT_ALL == pwdinfo->wfd_info->scan_result_type ) ++ { ++ ++ } ++ else if ( ( SCAN_RESULT_P2P_ONLY == pwdinfo->wfd_info->scan_result_type ) || ++ ( SCAN_RESULT_WFD_TYPE == pwdinfo->wfd_info->scan_result_type ) ) ++#endif // CONFIG_WFD ++ { ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ u32 blnGotP2PIE = _FALSE; ++ ++ // User is doing the P2P device discovery ++ // The prefix of SSID should be "DIRECT-" and the IE should contains the P2P IE. ++ // If not, the driver should ignore this AP and go to the next AP. ++ ++ // Verifying the SSID ++ if ( _rtw_memcmp( pnetwork->network.Ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN ) ) ++ { ++ u32 p2pielen = 0; ++ ++ // Verifying the P2P IE ++ if ( rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen) ) ++ { ++ blnGotP2PIE = _TRUE; ++ } ++ } ++ ++ if ( blnGotP2PIE == _FALSE ) ++ { ++ return start; ++ } ++ ++ } ++ } ++ ++#ifdef CONFIG_WFD ++ if ( SCAN_RESULT_WFD_TYPE == pwdinfo->wfd_info->scan_result_type ) ++ { ++ u32 blnGotWFD = _FALSE; ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ uint wfd_ielen = 0; ++ ++ if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 wfd_devinfo[ 6 ] = { 0x00 }; ++ uint wfd_devlen = 6; ++ ++ if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen) ) ++ { ++ if ( pwdinfo->wfd_info->wfd_device_type == WFD_DEVINFO_PSINK ) ++ { ++ // the first two bits will indicate the WFD device type ++ if ( ( wfd_devinfo[ 1 ] & 0x03 ) == WFD_DEVINFO_SOURCE ) ++ { ++ // If this device is Miracast PSink device, the scan reuslt should just provide the Miracast source. ++ blnGotWFD = _TRUE; ++ } ++ } ++ else if ( pwdinfo->wfd_info->wfd_device_type == WFD_DEVINFO_SOURCE ) ++ { ++ // the first two bits will indicate the WFD device type ++ if ( ( wfd_devinfo[ 1 ] & 0x03 ) == WFD_DEVINFO_PSINK ) ++ { ++ // If this device is Miracast source device, the scan reuslt should just provide the Miracast PSink. ++ // Todo: How about the SSink?! ++ blnGotWFD = _TRUE; ++ } ++ } ++ } ++ } ++ ++ if ( blnGotWFD == _FALSE ) ++ { ++ return start; ++ } ++ } ++#endif // CONFIG_WFD ++ ++#endif //CONFIG_P2P ++ /* AP MAC address */ ++ iwe.cmd = SIOCGIWAP; ++ iwe.u.ap_addr.sa_family = ARPHRD_ETHER; ++ ++ _rtw_memcpy(iwe.u.ap_addr.sa_data, pnetwork->network.MacAddress, ETH_ALEN); ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN); ++ ++ /* Add the ESSID */ ++ iwe.cmd = SIOCGIWESSID; ++ iwe.u.data.flags = 1; ++ iwe.u.data.length = min((u16)pnetwork->network.Ssid.SsidLength, (u16)32); ++ start = iwe_stream_add_point(info, start, stop, &iwe, pnetwork->network.Ssid.Ssid); ++ ++ //parsing HT_CAP_IE ++ p = rtw_get_ie(&pnetwork->network.IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pnetwork->network.IELength-12); ++ ++ if(p && ht_ielen>0) ++ { ++ struct rtw_ieee80211_ht_cap *pht_capie; ++ ht_cap = _TRUE; ++ pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2); ++ _rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2); ++ bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0; ++ short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0; ++ } ++ ++ /* Add the protocol name */ ++ iwe.cmd = SIOCGIWNAME; ++ if ((rtw_is_cckratesonly_included((u8*)&pnetwork->network.SupportedRates)) == _TRUE) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bn"); ++ else ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11b"); ++ } ++ else if ((rtw_is_cckrates_included((u8*)&pnetwork->network.SupportedRates)) == _TRUE) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bgn"); ++ else ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bg"); ++ } ++ else ++ { ++ if(pnetwork->network.Configuration.DSConfig > 14) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11an"); ++ else ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11a"); ++ } ++ else ++ { ++ if(ht_cap == _TRUE) ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11gn"); ++ else ++ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11g"); ++ } ++ } ++ ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN); ++ ++ /* Add mode */ ++ iwe.cmd = SIOCGIWMODE; ++ _rtw_memcpy((u8 *)&cap, rtw_get_capability_from_ie(pnetwork->network.IEs), 2); ++ ++ ++ cap = le16_to_cpu(cap); ++ ++ if(cap & (WLAN_CAPABILITY_IBSS |WLAN_CAPABILITY_BSS)){ ++ if (cap & WLAN_CAPABILITY_BSS) ++ iwe.u.mode = IW_MODE_MASTER; ++ else ++ iwe.u.mode = IW_MODE_ADHOC; ++ ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN); ++ } ++ ++ if(pnetwork->network.Configuration.DSConfig<1 /*|| pnetwork->network.Configuration.DSConfig>14*/) ++ pnetwork->network.Configuration.DSConfig = 1; ++ ++ /* Add frequency/channel */ ++ iwe.cmd = SIOCGIWFREQ; ++ iwe.u.freq.m = rtw_ch2freq(pnetwork->network.Configuration.DSConfig) * 100000; ++ iwe.u.freq.e = 1; ++ iwe.u.freq.i = pnetwork->network.Configuration.DSConfig; ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN); ++ ++ /* Add encryption capability */ ++ iwe.cmd = SIOCGIWENCODE; ++ if (cap & WLAN_CAPABILITY_PRIVACY) ++ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; ++ else ++ iwe.u.data.flags = IW_ENCODE_DISABLED; ++ iwe.u.data.length = 0; ++ start = iwe_stream_add_point(info, start, stop, &iwe, pnetwork->network.Ssid.Ssid); ++ ++ /*Add basic and extended rates */ ++ max_rate = 0; ++ p = custom; ++ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): "); ++ while(pnetwork->network.SupportedRates[i]!=0) ++ { ++ rate = pnetwork->network.SupportedRates[i]&0x7F; ++ if (rate > max_rate) ++ max_rate = rate; ++ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), ++ "%d%s ", rate >> 1, (rate & 1) ? ".5" : ""); ++ i++; ++ } ++ ++ if(ht_cap == _TRUE) ++ { ++ if(mcs_rate&0x8000)//MCS15 ++ { ++ max_rate = (bw_40MHz) ? ((short_GI)?300:270):((short_GI)?144:130); ++ ++ } ++ else if(mcs_rate&0x0080)//MCS7 ++ { ++ max_rate = (bw_40MHz) ? ((short_GI)?150:135):((short_GI)?72:65); ++ } ++ else//default MCS7 ++ { ++ DBG_871X("wx_get_scan, mcs_rate_bitmap=0x%x\n", mcs_rate); ++ max_rate = (bw_40MHz) ? ((short_GI)?150:135):((short_GI)?72:65); ++ } ++ ++ max_rate = max_rate*2;//Mbps/2; ++ } ++ ++ iwe.cmd = SIOCGIWRATE; ++ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; ++ iwe.u.bitrate.value = max_rate * 500000; ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_PARAM_LEN); ++ ++ //parsing WPA/WPA2 IE ++ { ++ u8 buf[MAX_WPA_IE_LEN]; ++ u8 wpa_ie[255],rsn_ie[255]; ++ u16 wpa_len=0,rsn_len=0; ++ u8 *p; ++ sint out_len=0; ++ out_len=rtw_get_sec_ie(pnetwork->network.IEs ,pnetwork->network.IELength,rsn_ie,&rsn_len,wpa_ie,&wpa_len); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan: ssid=%s\n",pnetwork->network.Ssid.Ssid)); ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan: wpa_len=%d rsn_len=%d\n",wpa_len,rsn_len)); ++ ++ if (wpa_len > 0) ++ { ++ p=buf; ++ _rtw_memset(buf, 0, MAX_WPA_IE_LEN); ++ p += sprintf(p, "wpa_ie="); ++ for (i = 0; i < wpa_len; i++) { ++ p += sprintf(p, "%02x", wpa_ie[i]); ++ } ++ ++ _rtw_memset(&iwe, 0, sizeof(iwe)); ++ iwe.cmd = IWEVCUSTOM; ++ iwe.u.data.length = strlen(buf); ++ start = iwe_stream_add_point(info, start, stop, &iwe,buf); ++ ++ _rtw_memset(&iwe, 0, sizeof(iwe)); ++ iwe.cmd =IWEVGENIE; ++ iwe.u.data.length = wpa_len; ++ start = iwe_stream_add_point(info, start, stop, &iwe, wpa_ie); ++ } ++ if (rsn_len > 0) ++ { ++ p = buf; ++ _rtw_memset(buf, 0, MAX_WPA_IE_LEN); ++ p += sprintf(p, "rsn_ie="); ++ for (i = 0; i < rsn_len; i++) { ++ p += sprintf(p, "%02x", rsn_ie[i]); ++ } ++ _rtw_memset(&iwe, 0, sizeof(iwe)); ++ iwe.cmd = IWEVCUSTOM; ++ iwe.u.data.length = strlen(buf); ++ start = iwe_stream_add_point(info, start, stop, &iwe,buf); ++ ++ _rtw_memset(&iwe, 0, sizeof(iwe)); ++ iwe.cmd =IWEVGENIE; ++ iwe.u.data.length = rsn_len; ++ start = iwe_stream_add_point(info, start, stop, &iwe, rsn_ie); ++ } ++ } ++ ++ { //parsing WPS IE ++ uint cnt = 0,total_ielen; ++ u8 *wpsie_ptr=NULL; ++ uint wps_ielen = 0; ++ ++ u8 *ie_ptr = pnetwork->network.IEs +_FIXED_IE_LENGTH_; ++ total_ielen= pnetwork->network.IELength - _FIXED_IE_LENGTH_; ++ ++ while(cnt < total_ielen) ++ { ++ if(rtw_is_wps_ie(&ie_ptr[cnt], &wps_ielen) && (wps_ielen>2)) ++ { ++ wpsie_ptr = &ie_ptr[cnt]; ++ iwe.cmd =IWEVGENIE; ++ iwe.u.data.length = (u16)wps_ielen; ++ start = iwe_stream_add_point(info, start, stop, &iwe, wpsie_ptr); ++ } ++ cnt+=ie_ptr[cnt+1]+2; //goto next ++ } ++ } ++ ++ ++{ ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 ss, sq; ++ ++ /* Add quality statistics */ ++ iwe.cmd = IWEVQUAL; ++ iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID ++ #ifdef CONFIG_SIGNAL_DISPLAY_DBM ++ | IW_QUAL_DBM ++ #endif ++ ; ++ ++ if ( check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE && ++ is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) { ++ ss = padapter->recvpriv.signal_strength; ++ sq = padapter->recvpriv.signal_qual; ++ } else { ++ ss = pnetwork->network.PhyInfo.SignalStrength; ++ sq = pnetwork->network.PhyInfo.SignalQuality; ++ } ++ ++ ++ #ifdef CONFIG_SIGNAL_DISPLAY_DBM ++ iwe.u.qual.level = (u8) translate_percentage_to_dbm(ss);//dbm ++ #else ++ iwe.u.qual.level = (u8)ss;//% ++ #endif ++ ++ iwe.u.qual.qual = (u8)sq; // signal quality ++ ++ #ifdef CONFIG_PLATFORM_ROCKCHIPS ++ iwe.u.qual.noise = -100; // noise level suggest by zhf@rockchips ++ #else ++ iwe.u.qual.noise = 0; // noise level ++ #endif //CONFIG_PLATFORM_ROCKCHIPS ++ ++ //DBG_871X("iqual=%d, ilevel=%d, inoise=%d, iupdated=%d\n", iwe.u.qual.qual, iwe.u.qual.level , iwe.u.qual.noise, iwe.u.qual.updated); ++ ++ start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN); ++} ++ ++ return start; ++} ++ ++static int wpa_set_auth_algs(struct net_device *dev, u32 value) ++{ ++ _adapter *padapter = (_adapter *) rtw_netdev_priv(dev); ++ int ret = 0; ++ ++ if ((value & AUTH_ALG_SHARED_KEY)&&(value & AUTH_ALG_OPEN_SYSTEM)) ++ { ++ DBG_871X("wpa_set_auth_algs, AUTH_ALG_SHARED_KEY and AUTH_ALG_OPEN_SYSTEM [value:0x%x]\n",value); ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch; ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++ } ++ else if (value & AUTH_ALG_SHARED_KEY) ++ { ++ DBG_871X("wpa_set_auth_algs, AUTH_ALG_SHARED_KEY [value:0x%x]\n",value); ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ ++#ifdef CONFIG_PLATFORM_MT53XX ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch; ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++#else ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeShared; ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Shared; ++#endif ++ } ++ else if(value & AUTH_ALG_OPEN_SYSTEM) ++ { ++ DBG_871X("wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM\n"); ++ //padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ if(padapter->securitypriv.ndisauthtype < Ndis802_11AuthModeWPAPSK) ++ { ++#ifdef CONFIG_PLATFORM_MT53XX ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch; ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++#else ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen; ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Open; ++#endif ++ } ++ ++ } ++ else if(value & AUTH_ALG_LEAP) ++ { ++ DBG_871X("wpa_set_auth_algs, AUTH_ALG_LEAP\n"); ++ } ++ else ++ { ++ DBG_871X("wpa_set_auth_algs, error!\n"); ++ ret = -EINVAL; ++ } ++ ++ return ret; ++ ++} ++ ++static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len) ++{ ++ int ret = 0; ++ u32 wep_key_idx, wep_key_len,wep_total_len; ++ NDIS_802_11_WEP *pwep = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ ++_func_enter_; ++ ++ param->u.crypt.err = 0; ++ param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0'; ++ ++ if (param_len < (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ ++ if (param->u.crypt.idx >= WEP_KEYS ++#ifdef CONFIG_IEEE80211W ++ && param->u.crypt.idx > BIP_MAX_KEYID ++#endif //CONFIG_IEEE80211W ++ ) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ } ++ else ++ { ++ ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ } ++ ++ if (strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("wpa_set_encryption, crypt.alg = WEP\n")); ++ DBG_871X("wpa_set_encryption, crypt.alg = WEP\n"); ++ ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_; ++ ++ wep_key_idx = param->u.crypt.idx; ++ wep_key_len = param->u.crypt.key_len; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("(1)wep_key_idx=%d\n", wep_key_idx)); ++ DBG_871X("(1)wep_key_idx=%d\n", wep_key_idx); ++ ++ if (wep_key_idx > WEP_KEYS) ++ return -EINVAL; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("(2)wep_key_idx=%d\n", wep_key_idx)); ++ ++ if (wep_key_len > 0) ++ { ++ wep_key_len = wep_key_len <= 5 ? 5 : 13; ++ wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial); ++ pwep =(NDIS_802_11_WEP *) rtw_malloc(wep_total_len); ++ if(pwep == NULL){ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,(" wpa_set_encryption: pwep allocate fail !!!\n")); ++ goto exit; ++ } ++ ++ _rtw_memset(pwep, 0, wep_total_len); ++ ++ pwep->KeyLength = wep_key_len; ++ pwep->Length = wep_total_len; ++ ++ if(wep_key_len==13) ++ { ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_; ++ } ++ } ++ else { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ pwep->KeyIndex = wep_key_idx; ++ pwep->KeyIndex |= 0x80000000; ++ ++ _rtw_memcpy(pwep->KeyMaterial, param->u.crypt.key, pwep->KeyLength); ++ ++ if(param->u.crypt.set_tx) ++ { ++ DBG_871X("wep, set_tx=1\n"); ++ ++ if(rtw_set_802_11_add_wep(padapter, pwep) == (u8)_FAIL) ++ { ++ ret = -EOPNOTSUPP ; ++ } ++ } ++ else ++ { ++ DBG_871X("wep, set_tx=0\n"); ++ ++ //don't update "psecuritypriv->dot11PrivacyAlgrthm" and ++ //"psecuritypriv->dot11PrivacyKeyIndex=keyid", but can rtw_set_key to fw/cam ++ ++ if (wep_key_idx >= WEP_KEYS) { ++ ret = -EOPNOTSUPP ; ++ goto exit; ++ } ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength); ++ psecuritypriv->dot11DefKeylen[wep_key_idx]=pwep->KeyLength; ++ rtw_set_key(padapter, psecuritypriv, wep_key_idx, 0); ++ } ++ ++ goto exit; ++ } ++ ++ if(padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) // 802_1x ++ { ++ struct sta_info * psta,*pbcmc_sta; ++ struct sta_priv * pstapriv = &padapter->stapriv; ++ ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_MP_STATE) == _TRUE) //sta mode ++ { ++ psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv)); ++ if (psta == NULL) { ++ //DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n")); ++ } ++ else ++ { ++ //Jeff: don't disable ieee8021x_blocked while clearing key ++ if (strcmp(param->u.crypt.alg, "none") != 0) ++ psta->ieee8021x_blocked = _FALSE; ++ ++ if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)|| ++ (padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption3Enabled)) ++ { ++ psta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm; ++ } ++ ++ if(param->u.crypt.set_tx ==1)//pairwise key ++ { ++ _rtw_memcpy(psta->dot118021x_UncstKey.skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ if(strcmp(param->u.crypt.alg, "TKIP") == 0)//set mic key ++ { ++ //DEBUG_ERR(("\nset key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len)); ++ _rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8); ++ ++ padapter->securitypriv.busetkipkey=_FALSE; ++ //_set_timer(&padapter->securitypriv.tkip_timer, 50); ++ } ++ ++ //DEBUG_ERR(("\n param->u.crypt.key_len=%d\n",param->u.crypt.key_len)); ++ //DEBUG_ERR(("\n ~~~~stastakey:unicastkey\n")); ++ DBG_871X("\n ~~~~stastakey:unicastkey\n"); ++ ++ rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE); ++ } ++ else//group key ++ { ++ if(strcmp(param->u.crypt.alg, "TKIP") == 0 || strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ //only TKIP group key need to install this ++ if(param->u.crypt.key_len > 16) ++ { ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[16]),8); ++ _rtw_memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[24]),8); ++ } ++ padapter->securitypriv.binstallGrpkey = _TRUE; ++ //DEBUG_ERR((" param->u.crypt.key_len=%d\n", param->u.crypt.key_len)); ++ DBG_871X(" ~~~~set sta key:groupkey\n"); ++ ++ padapter->securitypriv.dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ rtw_set_key(padapter,&padapter->securitypriv,param->u.crypt.idx, 1); ++ } ++#ifdef CONFIG_IEEE80211W ++ else if(strcmp(param->u.crypt.alg, "BIP") == 0) ++ { ++ int no; ++ //printk("BIP key_len=%d , index=%d @@@@@@@@@@@@@@@@@@\n", param->u.crypt.key_len, param->u.crypt.idx); ++ //save the IGTK key, length 16 bytes ++ _rtw_memcpy(padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey, param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ /*printk("IGTK key below:\n"); ++ for(no=0;no<16;no++) ++ printk(" %02x ", padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey[no]); ++ printk("\n");*/ ++ padapter->securitypriv.dot11wBIPKeyid = param->u.crypt.idx; ++ padapter->securitypriv.binstallBIPkey = _TRUE; ++ DBG_871X(" ~~~~set sta key:IGKT\n"); ++ } ++#endif //CONFIG_IEEE80211W ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING)) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_DONE); ++ } ++#endif //CONFIG_P2P ++ ++ } ++ } ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta==NULL) ++ { ++ //DEBUG_ERR( ("Set OID_802_11_ADD_KEY: bcmc stainfo is null \n")); ++ } ++ else ++ { ++ //Jeff: don't disable ieee8021x_blocked while clearing key ++ if (strcmp(param->u.crypt.alg, "none") != 0) ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ ++ if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)|| ++ (padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption3Enabled)) ++ { ++ pbcmc_sta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm; ++ } ++ } ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)) //adhoc mode ++ { ++ } ++ } ++ ++exit: ++ ++ if (pwep) { ++ rtw_mfree((u8 *)pwep, wep_total_len); ++ } ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++static int rtw_set_wpa_ie(_adapter *padapter, char *pie, unsigned short ielen) ++{ ++ u8 *buf=NULL, *pos=NULL; ++ u32 left; ++ int group_cipher = 0, pairwise_cipher = 0; ++ int ret = 0; ++ u8 null_addr[]= {0,0,0,0,0,0}; ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ ++ if((ielen > MAX_WPA_IE_LEN) || (pie == NULL)){ ++ _clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ if(pie == NULL) ++ return ret; ++ else ++ return -EINVAL; ++ } ++ ++ if(ielen) ++ { ++ buf = rtw_zmalloc(ielen); ++ if (buf == NULL){ ++ ret = -ENOMEM; ++ goto exit; ++ } ++ ++ _rtw_memcpy(buf, pie , ielen); ++ ++ //dump ++ { ++ int i; ++ DBG_871X("\n wpa_ie(length:%d):\n", ielen); ++ for(i=0;i= RSN_SELECTOR_LEN){ ++ pos += RSN_SELECTOR_LEN; ++ left -= RSN_SELECTOR_LEN; ++ } ++ else if (left > 0){ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("Ie length mismatch, %u too much \n", left)); ++ ret =-1; ++ goto exit; ++ } ++#endif ++ ++ if(rtw_parse_wpa_ie(buf, ielen, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPAPSK; ++ _rtw_memcpy(padapter->securitypriv.supplicant_ie, &buf[0], ielen); ++ } ++ ++ if(rtw_parse_wpa2_ie(buf, ielen, &group_cipher, &pairwise_cipher) == _SUCCESS) ++ { ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; ++ padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPA2PSK; ++ _rtw_memcpy(padapter->securitypriv.supplicant_ie, &buf[0], ielen); ++ } ++ ++ if (group_cipher == 0) ++ { ++ group_cipher = WPA_CIPHER_NONE; ++ } ++ if (pairwise_cipher == 0) ++ { ++ pairwise_cipher = WPA_CIPHER_NONE; ++ } ++ ++ switch(group_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled; ++ break; ++ case WPA_CIPHER_WEP40: ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WPA_CIPHER_TKIP: ++ padapter->securitypriv.dot118021XGrpPrivacy=_TKIP_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case WPA_CIPHER_CCMP: ++ padapter->securitypriv.dot118021XGrpPrivacy=_AES_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ case WPA_CIPHER_WEP104: ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ } ++ ++ switch(pairwise_cipher) ++ { ++ case WPA_CIPHER_NONE: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled; ++ break; ++ case WPA_CIPHER_WEP40: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ case WPA_CIPHER_TKIP: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_TKIP_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case WPA_CIPHER_CCMP: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_AES_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ case WPA_CIPHER_WEP104: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ break; ++ } ++ ++ _clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ {//set wps_ie ++ u16 cnt = 0; ++ u8 eid, wps_oui[4]={0x0,0x50,0xf2,0x04}; ++ ++ while( cnt < ielen ) ++ { ++ eid = buf[cnt]; ++ ++ if((eid==_VENDOR_SPECIFIC_IE_)&&(_rtw_memcmp(&buf[cnt+2], wps_oui, 4)==_TRUE)) ++ { ++ DBG_871X("SET WPS_IE\n"); ++ ++ padapter->securitypriv.wps_ie_len = ( (buf[cnt+1]+2) < (MAX_WPA_IE_LEN<<2)) ? (buf[cnt+1]+2):(MAX_WPA_IE_LEN<<2); ++ ++ _rtw_memcpy(padapter->securitypriv.wps_ie, &buf[cnt], padapter->securitypriv.wps_ie_len); ++ ++ set_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS); ++ ++#ifdef CONFIG_P2P ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_OK)) ++ { ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_ING); ++ } ++#endif //CONFIG_P2P ++ cnt += buf[cnt+1]+2; ++ ++ break; ++ } else { ++ cnt += buf[cnt+1]+2; //goto next ++ } ++ } ++ } ++ } ++ ++ //TKIP and AES disallow multicast packets until installing group key ++ if(padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_ ++ || padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_WTMIC_ ++ || padapter->securitypriv.dot11PrivacyAlgrthm == _AES_) ++ //WPS open need to enable multicast ++ //|| check_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS) == _TRUE) ++ rtw_hal_set_hwreg(padapter, HW_VAR_OFF_RCR_AM, null_addr); ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("rtw_set_wpa_ie: pairwise_cipher=0x%08x padapter->securitypriv.ndisencryptstatus=%d padapter->securitypriv.ndisauthtype=%d\n", ++ pairwise_cipher, padapter->securitypriv.ndisencryptstatus, padapter->securitypriv.ndisauthtype)); ++ ++exit: ++ ++ if (buf) rtw_mfree(buf, ielen); ++ ++ return ret; ++} ++ ++static int rtw_wx_get_name(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u16 cap; ++ u32 ht_ielen = 0; ++ char *p; ++ u8 ht_cap=_FALSE; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network; ++ NDIS_802_11_RATES_EX* prates = NULL; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("cmd_code=%x\n", info->cmd)); ++ ++ _func_enter_; ++ ++ if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE) ++ { ++ //parsing HT_CAP_IE ++ p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12); ++ if(p && ht_ielen>0) ++ { ++ ht_cap = _TRUE; ++ } ++ ++ prates = &pcur_bss->SupportedRates; ++ ++ if (rtw_is_cckratesonly_included((u8*)prates) == _TRUE) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bn"); ++ else ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b"); ++ } ++ else if ((rtw_is_cckrates_included((u8*)prates)) == _TRUE) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bgn"); ++ else ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bg"); ++ } ++ else ++ { ++ if(pcur_bss->Configuration.DSConfig > 14) ++ { ++ if(ht_cap == _TRUE) ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11an"); ++ else ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11a"); ++ } ++ else ++ { ++ if(ht_cap == _TRUE) ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11gn"); ++ else ++ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11g"); ++ } ++ } ++ } ++ else ++ { ++ //prates = &padapter->registrypriv.dev_network.SupportedRates; ++ //snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11g"); ++ snprintf(wrqu->name, IFNAMSIZ, "unassociated"); ++ } ++ ++ _func_exit_; ++ ++ return 0; ++} ++ ++static int rtw_wx_set_freq(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+rtw_wx_set_freq\n")); ++ ++ _func_exit_; ++ ++ return 0; ++} ++ ++static int rtw_wx_get_freq(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ++ { ++ //wrqu->freq.m = ieee80211_wlan_frequencies[pcur_bss->Configuration.DSConfig-1] * 100000; ++ wrqu->freq.m = rtw_ch2freq(pcur_bss->Configuration.DSConfig) * 100000; ++ wrqu->freq.e = 1; ++ wrqu->freq.i = pcur_bss->Configuration.DSConfig; ++ ++ } ++ else{ ++ wrqu->freq.m = rtw_ch2freq(padapter->mlmeextpriv.cur_channel) * 100000; ++ wrqu->freq.e = 1; ++ wrqu->freq.i = padapter->mlmeextpriv.cur_channel; ++ } ++ ++ return 0; ++} ++ ++static int rtw_wx_set_mode(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *b) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ NDIS_802_11_NETWORK_INFRASTRUCTURE networkType ; ++ int ret = 0; ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _queue *queue = &pmlmepriv->scanned_queue; ++ _func_enter_; ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) { ++ ret= -EPERM; ++ goto exit; ++ } ++ ++ if (padapter->hw_init_completed==_FALSE){ ++ ret = -EPERM; ++ goto exit; ++ } ++ ++ switch(wrqu->mode) ++ { ++ case IW_MODE_AUTO: ++ networkType = Ndis802_11AutoUnknown; ++ DBG_871X("set_mode = IW_MODE_AUTO\n"); ++ break; ++ case IW_MODE_ADHOC: ++ networkType = Ndis802_11IBSS; ++ DBG_871X("set_mode = IW_MODE_ADHOC\n"); ++ break; ++ case IW_MODE_MASTER: ++ networkType = Ndis802_11APMode; ++ DBG_871X("set_mode = IW_MODE_MASTER\n"); ++ //rtw_setopmode_cmd(padapter, networkType); ++ break; ++ case IW_MODE_INFRA: ++ networkType = Ndis802_11Infrastructure; ++ DBG_871X("set_mode = IW_MODE_INFRA\n"); ++ break; ++ ++ default : ++ ret = -EINVAL;; ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("\n Mode: %s is not supported \n", iw_operation_mode[wrqu->mode])); ++ goto exit; ++ } ++ ++/* ++ if(Ndis802_11APMode == networkType) ++ { ++ rtw_setopmode_cmd(padapter, networkType); ++ } ++ else ++ { ++ rtw_setopmode_cmd(padapter, Ndis802_11AutoUnknown); ++ } ++*/ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _enter_critical_bh(&queue->lock, &irqL); ++ if (rtw_set_802_11_infrastructure_mode(padapter, networkType) ==_FALSE){ ++ ++ ret = -EPERM; ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ goto exit; ++ ++ } ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ rtw_setopmode_cmd(padapter, networkType); ++ ++exit: ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_get_mode(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *b) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,(" rtw_wx_get_mode \n")); ++ ++ _func_enter_; ++ ++ if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE) ++ { ++ wrqu->mode = IW_MODE_INFRA; ++ } ++ else if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)) ++ ++ { ++ wrqu->mode = IW_MODE_ADHOC; ++ } ++ else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ wrqu->mode = IW_MODE_MASTER; ++ } ++ else ++ { ++ wrqu->mode = IW_MODE_AUTO; ++ } ++ ++ _func_exit_; ++ ++ return 0; ++ ++} ++ ++ ++static int rtw_wx_set_pmkid(struct net_device *dev, ++ struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 j,blInserted = _FALSE; ++ int intReturn = _FALSE; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct iw_pmksa* pPMK = ( struct iw_pmksa* ) extra; ++ u8 strZeroMacAddress[ ETH_ALEN ] = { 0x00 }; ++ u8 strIssueBssid[ ETH_ALEN ] = { 0x00 }; ++ ++/* ++ struct iw_pmksa ++ { ++ __u32 cmd; ++ struct sockaddr bssid; ++ __u8 pmkid[IW_PMKID_LEN]; //IW_PMKID_LEN=16 ++ } ++ There are the BSSID information in the bssid.sa_data array. ++ If cmd is IW_PMKSA_FLUSH, it means the wpa_suppplicant wants to clear all the PMKID information. ++ If cmd is IW_PMKSA_ADD, it means the wpa_supplicant wants to add a PMKID/BSSID to driver. ++ If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to remove a PMKID/BSSID from driver. ++ */ ++ ++ _rtw_memcpy( strIssueBssid, pPMK->bssid.sa_data, ETH_ALEN); ++ if ( pPMK->cmd == IW_PMKSA_ADD ) ++ { ++ DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_ADD!\n" ); ++ if ( _rtw_memcmp( strIssueBssid, strZeroMacAddress, ETH_ALEN ) == _TRUE ) ++ { ++ return( intReturn ); ++ } ++ else ++ { ++ intReturn = _TRUE; ++ } ++ blInserted = _FALSE; ++ ++ //overwrite PMKID ++ for(j=0 ; jPMKIDList[j].Bssid, strIssueBssid, ETH_ALEN) ==_TRUE ) ++ { // BSSID is matched, the same AP => rewrite with new PMKID. ++ ++ DBG_871X( "[rtw_wx_set_pmkid] BSSID exists in the PMKList.\n" ); ++ ++ _rtw_memcpy( psecuritypriv->PMKIDList[j].PMKID, pPMK->pmkid, IW_PMKID_LEN); ++ psecuritypriv->PMKIDList[ j ].bUsed = _TRUE; ++ psecuritypriv->PMKIDIndex = j+1; ++ blInserted = _TRUE; ++ break; ++ } ++ } ++ ++ if(!blInserted) ++ { ++ // Find a new entry ++ DBG_871X( "[rtw_wx_set_pmkid] Use the new entry index = %d for this PMKID.\n", ++ psecuritypriv->PMKIDIndex ); ++ ++ _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].Bssid, strIssueBssid, ETH_ALEN); ++ _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].PMKID, pPMK->pmkid, IW_PMKID_LEN); ++ ++ psecuritypriv->PMKIDList[ psecuritypriv->PMKIDIndex ].bUsed = _TRUE; ++ psecuritypriv->PMKIDIndex++ ; ++ if(psecuritypriv->PMKIDIndex==16) ++ { ++ psecuritypriv->PMKIDIndex =0; ++ } ++ } ++ } ++ else if ( pPMK->cmd == IW_PMKSA_REMOVE ) ++ { ++ DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_REMOVE!\n" ); ++ intReturn = _TRUE; ++ for(j=0 ; jPMKIDList[j].Bssid, strIssueBssid, ETH_ALEN) ==_TRUE ) ++ { // BSSID is matched, the same AP => Remove this PMKID information and reset it. ++ _rtw_memset( psecuritypriv->PMKIDList[ j ].Bssid, 0x00, ETH_ALEN ); ++ psecuritypriv->PMKIDList[ j ].bUsed = _FALSE; ++ break; ++ } ++ } ++ } ++ else if ( pPMK->cmd == IW_PMKSA_FLUSH ) ++ { ++ DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_FLUSH!\n" ); ++ _rtw_memset( &psecuritypriv->PMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE ); ++ psecuritypriv->PMKIDIndex = 0; ++ intReturn = _TRUE; ++ } ++ return( intReturn ); ++} ++ ++static int rtw_wx_get_sens(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ #ifdef CONFIG_PLATFORM_ROCKCHIPS ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ /* ++ * 20110311 Commented by Jeff ++ * For rockchip platform's wpa_driver_wext_get_rssi ++ */ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ //wrqu->sens.value=-padapter->recvpriv.signal_strength; ++ wrqu->sens.value=-padapter->recvpriv.rssi; ++ //DBG_871X("%s: %d\n", __FUNCTION__, wrqu->sens.value); ++ wrqu->sens.fixed = 0; /* no auto select */ ++ } else ++ #endif ++ { ++ wrqu->sens.value = 0; ++ wrqu->sens.fixed = 0; /* no auto select */ ++ wrqu->sens.disabled = 1; ++ } ++ return 0; ++} ++ ++static int rtw_wx_get_range(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ struct iw_range *range = (struct iw_range *)extra; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ u16 val; ++ int i; ++ ++ _func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_range. cmd_code=%x\n", info->cmd)); ++ ++ wrqu->data.length = sizeof(*range); ++ _rtw_memset(range, 0, sizeof(*range)); ++ ++ /* Let's try to keep this struct in the same order as in ++ * linux/include/wireless.h ++ */ ++ ++ /* TODO: See what values we can set, and remove the ones we can't ++ * set, or fill them with some default data. ++ */ ++ ++ /* ~5 Mb/s real (802.11b) */ ++ range->throughput = 5 * 1000 * 1000; ++ ++ // TODO: Not used in 802.11b? ++// range->min_nwid; /* Minimal NWID we are able to set */ ++ // TODO: Not used in 802.11b? ++// range->max_nwid; /* Maximal NWID we are able to set */ ++ ++ /* Old Frequency (backward compat - moved lower ) */ ++// range->old_num_channels; ++// range->old_num_frequency; ++// range->old_freq[6]; /* Filler to keep "version" at the same offset */ ++ ++ /* signal level threshold range */ ++ ++ //percent values between 0 and 100. ++ range->max_qual.qual = 100; ++ range->max_qual.level = 100; ++ range->max_qual.noise = 100; ++ range->max_qual.updated = 7; /* Updated all three */ ++ ++ ++ range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */ ++ /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ ++ range->avg_qual.level = 20 + -98; ++ range->avg_qual.noise = 0; ++ range->avg_qual.updated = 7; /* Updated all three */ ++ ++ range->num_bitrates = RATE_COUNT; ++ ++ for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { ++ range->bitrate[i] = rtw_rates[i]; ++ } ++ ++ range->min_frag = MIN_FRAG_THRESHOLD; ++ range->max_frag = MAX_FRAG_THRESHOLD; ++ ++ range->pm_capa = 0; ++ ++ range->we_version_compiled = WIRELESS_EXT; ++ range->we_version_source = 16; ++ ++// range->retry_capa; /* What retry options are supported */ ++// range->retry_flags; /* How to decode max/min retry limit */ ++// range->r_time_flags; /* How to decode max/min retry life */ ++// range->min_retry; /* Minimal number of retries */ ++// range->max_retry; /* Maximal number of retries */ ++// range->min_r_time; /* Minimal retry lifetime */ ++// range->max_r_time; /* Maximal retry lifetime */ ++ ++ for (i = 0, val = 0; i < MAX_CHANNEL_NUM; i++) { ++ ++ // Include only legal frequencies for some countries ++ if(pmlmeext->channel_set[i].ChannelNum != 0) ++ { ++ range->freq[val].i = pmlmeext->channel_set[i].ChannelNum; ++ range->freq[val].m = rtw_ch2freq(pmlmeext->channel_set[i].ChannelNum) * 100000; ++ range->freq[val].e = 1; ++ val++; ++ } ++ ++ if (val == IW_MAX_FREQUENCIES) ++ break; ++ } ++ ++ range->num_channels = val; ++ range->num_frequency = val; ++ ++// Commented by Albert 2009/10/13 ++// The following code will proivde the security capability to network manager. ++// If the driver doesn't provide this capability to network manager, ++// the WPA/WPA2 routers can't be choosen in the network manager. ++ ++/* ++#define IW_SCAN_CAPA_NONE 0x00 ++#define IW_SCAN_CAPA_ESSID 0x01 ++#define IW_SCAN_CAPA_BSSID 0x02 ++#define IW_SCAN_CAPA_CHANNEL 0x04 ++#define IW_SCAN_CAPA_MODE 0x08 ++#define IW_SCAN_CAPA_RATE 0x10 ++#define IW_SCAN_CAPA_TYPE 0x20 ++#define IW_SCAN_CAPA_TIME 0x40 ++*/ ++ ++#if WIRELESS_EXT > 17 ++ range->enc_capa = IW_ENC_CAPA_WPA|IW_ENC_CAPA_WPA2| ++ IW_ENC_CAPA_CIPHER_TKIP|IW_ENC_CAPA_CIPHER_CCMP; ++#endif ++ ++#ifdef IW_SCAN_CAPA_ESSID //WIRELESS_EXT > 21 ++ range->scan_capa = IW_SCAN_CAPA_ESSID | IW_SCAN_CAPA_TYPE |IW_SCAN_CAPA_BSSID| ++ IW_SCAN_CAPA_CHANNEL|IW_SCAN_CAPA_MODE|IW_SCAN_CAPA_RATE; ++#endif ++ ++ ++ _func_exit_; ++ ++ return 0; ++ ++} ++ ++//set bssid flow ++//s1. rtw_set_802_11_infrastructure_mode() ++//s2. rtw_set_802_11_authentication_mode() ++//s3. set_802_11_encryption_mode() ++//s4. rtw_set_802_11_bssid() ++static int rtw_wx_set_wap(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *awrq, ++ char *extra) ++{ ++ _irqL irqL; ++ uint ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct sockaddr *temp = (struct sockaddr *)awrq; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _list *phead; ++ u8 *dst_bssid, *src_bssid; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ NDIS_802_11_AUTHENTICATION_MODE authmode; ++ ++ _func_enter_; ++/* ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type > PRIMARY_IFACE) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++*/ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ printk("set bssid, but buddy_intf is under scanning or linking\n"); ++ ++ ret = -EINVAL; ++ ++ goto exit; ++ } ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE) ++ { ++ printk("set bssid, but buddy_intf is under scanning or linking\n"); ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) ++ { ++ ret= -1; ++ goto exit; ++ } ++ ++ if(!padapter->bup){ ++ ret = -1; ++ goto exit; ++ } ++ ++ ++ if (temp->sa_family != ARPHRD_ETHER){ ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ authmode = padapter->securitypriv.ndisauthtype; ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _enter_critical_bh(&queue->lock, &irqL); ++ phead = get_list_head(queue); ++ pmlmepriv->pscanned = get_next(phead); ++ ++ while (1) ++ { ++ ++ if ((rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) == _TRUE) ++ { ++#if 0 ++ ret = -EINVAL; ++ goto exit; ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ++ { ++ rtw_set_802_11_bssid(padapter, temp->sa_data); ++ goto exit; ++ } ++ else ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++ ++ break; ++ } ++ ++ pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list); ++ ++ pmlmepriv->pscanned = get_next(pmlmepriv->pscanned); ++ ++ dst_bssid = pnetwork->network.MacAddress; ++ ++ src_bssid = temp->sa_data; ++ ++ if ((_rtw_memcmp(dst_bssid, src_bssid, ETH_ALEN)) == _TRUE) ++ { ++ if(!rtw_set_802_11_infrastructure_mode(padapter, pnetwork->network.InfrastructureMode)) ++ { ++ ret = -1; ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ goto exit; ++ } ++ ++ break; ++ } ++ ++ } ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ rtw_set_802_11_authentication_mode(padapter, authmode); ++ //set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus); ++ if (rtw_set_802_11_bssid(padapter, temp->sa_data) == _FALSE) { ++ ret = -1; ++ goto exit; ++ } ++ ++exit: ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++static int rtw_wx_get_wap(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network; ++ ++ wrqu->ap_addr.sa_family = ARPHRD_ETHER; ++ ++ _rtw_memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_wap\n")); ++ ++ _func_enter_; ++ ++ if ( ((check_fwstate(pmlmepriv, _FW_LINKED)) == _TRUE) || ++ ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) == _TRUE) || ++ ((check_fwstate(pmlmepriv, WIFI_AP_STATE)) == _TRUE) ) ++ { ++ ++ _rtw_memcpy(wrqu->ap_addr.sa_data, pcur_bss->MacAddress, ETH_ALEN); ++ } ++ else ++ { ++ _rtw_memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); ++ } ++ ++ _func_exit_; ++ ++ return 0; ++ ++} ++ ++static int rtw_wx_set_mlme(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++#if 0 ++/* SIOCSIWMLME data */ ++struct iw_mlme ++{ ++ __u16 cmd; /* IW_MLME_* */ ++ __u16 reason_code; ++ struct sockaddr addr; ++}; ++#endif ++ ++ int ret=0; ++ u16 reason; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_mlme *mlme = (struct iw_mlme *) extra; ++ ++ ++ if(mlme==NULL) ++ return -1; ++ ++ printk("%s\n", __FUNCTION__); ++ ++ reason = cpu_to_le16(mlme->reason_code); ++ ++ ++ printk("%s, cmd=%d, reason=%d\n", __FUNCTION__, mlme->cmd, reason); ++ ++ switch (mlme->cmd) ++ { ++ case IW_MLME_DEAUTH: ++ if(!rtw_set_802_11_disassociate(padapter)) ++ ret = -1; ++ break; ++ ++ case IW_MLME_DISASSOC: ++ if(!rtw_set_802_11_disassociate(padapter)) ++ ret = -1; ++ ++ break; ++ ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_set_scan(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ u8 _status = _FALSE; ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv= &padapter->mlmepriv; ++ NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT]; ++ _irqL irqL; ++#ifdef CONFIG_P2P ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif //CONFIG_P2P ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_set_scan\n")); ++ ++_func_enter_; ++ ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__); ++ #endif ++/* ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type > PRIMARY_IFACE) ++ { ++ ret = -1; ++ goto exit; ++ } ++#endif ++*/ ++ ++#ifdef CONFIG_MP_INCLUDED ++ if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) ++ { ++ ret = -1; ++ goto exit; ++ } ++#endif ++ ++ if(_FAIL == rtw_pwr_wakeup(padapter)) ++ { ++ ret= -1; ++ goto exit; ++ } ++ ++ if(padapter->bDriverStopped){ ++ DBG_871X("bDriverStopped=%d\n", padapter->bDriverStopped); ++ ret= -1; ++ goto exit; ++ } ++ ++ if(!padapter->bup){ ++ ret = -1; ++ goto exit; ++ } ++ ++ if (padapter->hw_init_completed==_FALSE){ ++ ret = -1; ++ goto exit; ++ } ++ ++ // When Busy Traffic, driver do not site survey. So driver return success. ++ // wpa_supplicant will not issue SIOCSIWSCAN cmd again after scan timeout. ++ // modify by thomas 2011-02-22. ++ if (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE) ++ { ++ indicate_wx_scan_complete_event(padapter); ++ goto exit; ++ } ++ ++ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ indicate_wx_scan_complete_event(padapter); ++ goto exit; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, ++ _FW_UNDER_SURVEY|_FW_UNDER_LINKING|WIFI_UNDER_WPS) == _TRUE) ++ { ++ if(check_buddy_fwstate(padapter, _FW_UNDER_SURVEY)) ++ { ++ printk("scanning_via_buddy_intf\n"); ++ pmlmepriv->scanning_via_buddy_intf = _TRUE; ++ } ++ ++ indicate_wx_scan_complete_event(padapter); ++ ++ goto exit; ++ } ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE) ++ { ++ indicate_wx_scan_complete_event(padapter); ++ goto exit; ++ } ++#endif ++ ++// Mareded by Albert 20101103 ++// For the DMP WiFi Display project, the driver won't to scan because ++// the pmlmepriv->scan_interval is always equal to 3. ++// So, the wpa_supplicant won't find out the WPS SoftAP. ++ ++/* ++ if(pmlmepriv->scan_interval>10) ++ pmlmepriv->scan_interval = 0; ++ ++ if(pmlmepriv->scan_interval > 0) ++ { ++ DBG_871X("scan done\n"); ++ ret = 0; ++ goto exit; ++ } ++ ++*/ ++#ifdef CONFIG_P2P ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ rtw_p2p_set_pre_state( pwdinfo, rtw_p2p_state( pwdinfo ) ); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH); ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_FULL); ++ rtw_free_network_queue(padapter, _TRUE); ++ } ++#endif //CONFIG_P2P ++ ++ _rtw_memset(ssid, 0, sizeof(NDIS_802_11_SSID)*RTW_SSID_SCAN_AMOUNT); ++ ++#if WIRELESS_EXT >= 17 ++ if (wrqu->data.length == sizeof(struct iw_scan_req)) ++ { ++ struct iw_scan_req *req = (struct iw_scan_req *)extra; ++ ++ if (wrqu->data.flags & IW_SCAN_THIS_ESSID) ++ { ++ int len = min((int)req->essid_len, IW_ESSID_MAX_SIZE); ++ ++ _rtw_memcpy(ssid[0].Ssid, req->essid, len); ++ ssid[0].SsidLength = len; ++ ++ DBG_871X("IW_SCAN_THIS_ESSID, ssid=%s, len=%d\n", req->essid, req->essid_len); ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ _status = rtw_sitesurvey_cmd(padapter, ssid, 1, NULL, 0); ++ ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++ } ++ else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) ++ { ++ DBG_871X("rtw_wx_set_scan, req->scan_type == IW_SCAN_TYPE_PASSIVE\n"); ++ } ++ ++ } ++ else ++#endif ++ ++ if( wrqu->data.length >= WEXT_CSCAN_HEADER_SIZE ++ && _rtw_memcmp(extra, WEXT_CSCAN_HEADER, WEXT_CSCAN_HEADER_SIZE) == _TRUE ++ ) ++ { ++ int len = wrqu->data.length -WEXT_CSCAN_HEADER_SIZE; ++ char *pos = extra+WEXT_CSCAN_HEADER_SIZE; ++ char section; ++ char sec_len; ++ int ssid_index = 0; ++ ++ //DBG_871X("%s COMBO_SCAN header is recognized\n", __FUNCTION__); ++ ++ while(len >= 1) { ++ section = *(pos++); len-=1; ++ ++ switch(section) { ++ case WEXT_CSCAN_SSID_SECTION: ++ //DBG_871X("WEXT_CSCAN_SSID_SECTION\n"); ++ if(len < 1) { ++ len = 0; ++ break; ++ } ++ ++ sec_len = *(pos++); len-=1; ++ ++ if(sec_len>0 && sec_len<=len) { ++ ssid[ssid_index].SsidLength = sec_len; ++ _rtw_memcpy(ssid[ssid_index].Ssid, pos, ssid[ssid_index].SsidLength); ++ //DBG_871X("%s COMBO_SCAN with specific ssid:%s, %d\n", __FUNCTION__ ++ // , ssid[ssid_index].Ssid, ssid[ssid_index].SsidLength); ++ ssid_index++; ++ } ++ ++ pos+=sec_len; len-=sec_len; ++ break; ++ ++ ++ case WEXT_CSCAN_CHANNEL_SECTION: ++ //DBG_871X("WEXT_CSCAN_CHANNEL_SECTION\n"); ++ pos+=1; len-=1; ++ break; ++ case WEXT_CSCAN_ACTV_DWELL_SECTION: ++ //DBG_871X("WEXT_CSCAN_ACTV_DWELL_SECTION\n"); ++ pos+=2; len-=2; ++ break; ++ case WEXT_CSCAN_PASV_DWELL_SECTION: ++ //DBG_871X("WEXT_CSCAN_PASV_DWELL_SECTION\n"); ++ pos+=2; len-=2; ++ break; ++ case WEXT_CSCAN_HOME_DWELL_SECTION: ++ //DBG_871X("WEXT_CSCAN_HOME_DWELL_SECTION\n"); ++ pos+=2; len-=2; ++ break; ++ case WEXT_CSCAN_TYPE_SECTION: ++ //DBG_871X("WEXT_CSCAN_TYPE_SECTION\n"); ++ pos+=1; len-=1; ++ break; ++ #if 0 ++ case WEXT_CSCAN_NPROBE_SECTION: ++ DBG_871X("WEXT_CSCAN_NPROBE_SECTION\n"); ++ break; ++ #endif ++ ++ default: ++ //DBG_871X("Unknown CSCAN section %c\n", section); ++ len = 0; // stop parsing ++ } ++ //DBG_871X("len:%d\n", len); ++ ++ } ++ ++ //jeff: it has still some scan paramater to parse, we only do this now... ++ _status = rtw_set_802_11_bssid_list_scan(padapter, ssid, RTW_SSID_SCAN_AMOUNT); ++ ++ } else ++ ++ { ++ _status = rtw_set_802_11_bssid_list_scan(padapter, NULL, 0); ++ } ++ ++ if(_status == _FALSE) ++ ret = -1; ++ ++exit: ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret); ++ #endif ++ ++_func_exit_; ++ ++ return ret; ++} ++ ++static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _irqL irqL; ++ _list *plist, *phead; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ char *ev = extra; ++ char *stop = ev + wrqu->data.length; ++ u32 ret = 0; ++ u32 cnt=0; ++ u32 wait_for_surveydone; ++ sint wait_status; ++#ifdef CONFIG_CONCURRENT_MODE ++ //PADAPTER pbuddy_adapter = padapter->pbuddy_adapter; ++ //struct mlme_priv *pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv); ++#endif ++#ifdef CONFIG_P2P ++ struct wifidirect_info* pwdinfo = &padapter->wdinfo; ++#endif //CONFIG_P2P ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan\n")); ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_, (" Start of Query SIOCGIWSCAN .\n")); ++ ++ _func_enter_; ++ ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__); ++ #endif ++ ++/* ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type > PRIMARY_IFACE) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++*/ ++ if(padapter->pwrctrlpriv.brfoffbyhw && padapter->bDriverStopped) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++#ifdef CONFIG_P2P ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ // P2P is enabled ++ if ( padapter->chip_type == RTL8192D ) ++ wait_for_surveydone = 300; // Because the 8192du supports more channels. ++ else ++ wait_for_surveydone = 200; ++ } ++ else ++ { ++ // P2P is disabled ++ wait_for_surveydone = 100; ++ } ++#else ++ { ++ wait_for_surveydone = 100; ++ } ++#endif //CONFIG_P2P ++ ++/* ++#ifdef CONFIG_CONCURRENT_MODE ++ if(pmlmepriv->scanning_via_buddy_intf == _TRUE) ++ { ++ pmlmepriv->scanning_via_buddy_intf = _FALSE;//reset ++ ++ // change pointers to buddy interface ++ padapter = pbuddy_adapter; ++ pmlmepriv = pbuddy_mlmepriv; ++ queue = &(pbuddy_mlmepriv->scanned_queue); ++ ++ } ++#endif // CONFIG_CONCURRENT_MODE ++*/ ++ ++ wait_status = _FW_UNDER_SURVEY ++ #ifndef CONFIG_ANDROID ++ |_FW_UNDER_LINKING ++ #endif ++ ; ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ while(dc_check_fwstate(padapter, wait_status)== _TRUE) ++ { ++ rtw_msleep_os(30); ++ cnt++; ++ if(cnt > wait_for_surveydone ) ++ break; ++ } ++#endif // CONFIG_DUALMAC_CONCURRENT ++ ++ while(check_fwstate(pmlmepriv, wait_status) == _TRUE) ++ { ++ rtw_msleep_os(30); ++ cnt++; ++ if(cnt > wait_for_surveydone ) ++ break; ++ } ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ if((stop - ev) < SCAN_ITEM_SIZE) { ++ ret = -E2BIG; ++ break; ++ } ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ //report network only if the current channel set contains the channel to which this network belongs ++ if(rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, pnetwork->network.Configuration.DSConfig) >= 0 ++ && rtw_mlme_band_check(padapter, pnetwork->network.Configuration.DSConfig) == _TRUE ++ && _TRUE == rtw_validate_ssid(&(pnetwork->network.Ssid)) ++ ) ++ { ++ ev=translate_scan(padapter, a, pnetwork, ev, stop); ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ wrqu->data.length = ev-extra; ++ wrqu->data.flags = 0; ++ ++exit: ++ ++ _func_exit_; ++ ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret); ++ #endif ++ ++ return ret ; ++ ++} ++ ++//set ssid flow ++//s1. rtw_set_802_11_infrastructure_mode() ++//s2. set_802_11_authenticaion_mode() ++//s3. set_802_11_encryption_mode() ++//s4. rtw_set_802_11_ssid() ++static int rtw_wx_set_essid(struct net_device *dev, ++ struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _irqL irqL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _queue *queue = &pmlmepriv->scanned_queue; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ _list *phead; ++ s8 status = _TRUE; ++ struct wlan_network *pnetwork = NULL; ++ NDIS_802_11_AUTHENTICATION_MODE authmode; ++ NDIS_802_11_SSID ndis_ssid; ++ u8 *dst_ssid, *src_ssid; ++ ++ uint ret = 0, len; ++ ++ _func_enter_; ++ ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__); ++ #endif ++ ++/* ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->iface_type > PRIMARY_IFACE) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++*/ ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ++ { ++ printk("set ssid, but buddy_intf is under scanning or linking\n"); ++ ++ ret = -EINVAL; ++ ++ goto exit; ++ } ++#endif ++ ++#ifdef CONFIG_DUALMAC_CONCURRENT ++ if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE) ++ { ++ printk("set bssid, but buddy_intf is under scanning or linking\n"); ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("+rtw_wx_set_essid: fw_state=0x%08x\n", get_fwstate(pmlmepriv))); ++ if(_FAIL == rtw_pwr_wakeup(padapter)) ++ { ++ ret = -1; ++ goto exit; ++ } ++ ++ if(!padapter->bup){ ++ ret = -1; ++ goto exit; ++ } ++ ++#if WIRELESS_EXT <= 20 ++ if ((wrqu->essid.length-1) > IW_ESSID_MAX_SIZE){ ++#else ++ if (wrqu->essid.length > IW_ESSID_MAX_SIZE){ ++#endif ++ ret= -E2BIG; ++ goto exit; ++ } ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) { ++ ret = -1; ++ goto exit; ++ } ++ ++ authmode = padapter->securitypriv.ndisauthtype; ++ DBG_871X("=>%s\n",__FUNCTION__); ++ if (wrqu->essid.flags && wrqu->essid.length) ++ { ++ // Commented by Albert 20100519 ++ // We got the codes in "set_info" function of iwconfig source code. ++ // ========================================= ++ // wrq.u.essid.length = strlen(essid) + 1; ++ // if(we_kernel_version > 20) ++ // wrq.u.essid.length--; ++ // ========================================= ++ // That means, if the WIRELESS_EXT less than or equal to 20, the correct ssid len should subtract 1. ++#if WIRELESS_EXT <= 20 ++ len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE; ++#else ++ len = (wrqu->essid.length < IW_ESSID_MAX_SIZE) ? wrqu->essid.length : IW_ESSID_MAX_SIZE; ++#endif ++ ++ if( wrqu->essid.length != 33 ) ++ DBG_871X("ssid=%s, len=%d\n", extra, wrqu->essid.length); ++ ++ _rtw_memset(&ndis_ssid, 0, sizeof(NDIS_802_11_SSID)); ++ ndis_ssid.SsidLength = len; ++ _rtw_memcpy(ndis_ssid.Ssid, extra, len); ++ src_ssid = ndis_ssid.Ssid; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ("rtw_wx_set_essid: ssid=[%s]\n", src_ssid)); ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _enter_critical_bh(&queue->lock, &irqL); ++ phead = get_list_head(queue); ++ pmlmepriv->pscanned = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, pmlmepriv->pscanned) == _TRUE) ++ { ++#if 0 ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ++ { ++ rtw_set_802_11_ssid(padapter, &ndis_ssid); ++ ++ goto exit; ++ } ++ else ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("rtw_wx_set_ssid(): scanned_queue is empty\n")); ++ ret = -EINVAL; ++ goto exit; ++ } ++#endif ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_warning_, ++ ("rtw_wx_set_essid: scan_q is empty, set ssid to check if scanning again!\n")); ++ ++ break; ++ } ++ ++ pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list); ++ ++ pmlmepriv->pscanned = get_next(pmlmepriv->pscanned); ++ ++ dst_ssid = pnetwork->network.Ssid.Ssid; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("rtw_wx_set_essid: dst_ssid=%s\n", ++ pnetwork->network.Ssid.Ssid)); ++ ++ if ((_rtw_memcmp(dst_ssid, src_ssid, ndis_ssid.SsidLength) == _TRUE) && ++ (pnetwork->network.Ssid.SsidLength==ndis_ssid.SsidLength)) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("rtw_wx_set_essid: find match, set infra mode\n")); ++ ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ++ { ++ if(pnetwork->network.InfrastructureMode != pmlmepriv->cur_network.network.InfrastructureMode) ++ continue; ++ } ++ ++ if (rtw_set_802_11_infrastructure_mode(padapter, pnetwork->network.InfrastructureMode) == _FALSE) ++ { ++ ret = -1; ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ goto exit; ++ } ++ ++ break; ++ } ++ } ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("set ssid: set_802_11_auth. mode=%d\n", authmode)); ++ rtw_set_802_11_authentication_mode(padapter, authmode); ++ //set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus); ++ if (rtw_set_802_11_ssid(padapter, &ndis_ssid) == _FALSE) { ++ ret = -1; ++ goto exit; ++ } ++ } ++ ++exit: ++ ++ DBG_871X("<=%s, ret %d\n",__FUNCTION__, ret); ++ ++ #ifdef DBG_IOCTL ++ DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret); ++ #endif ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++static int rtw_wx_get_essid(struct net_device *dev, ++ struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ u32 len,ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_essid\n")); ++ ++ _func_enter_; ++ ++ if ( (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) || ++ (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) ++ { ++ len = pcur_bss->Ssid.SsidLength; ++ ++ wrqu->essid.length = len; ++ ++ _rtw_memcpy(extra, pcur_bss->Ssid.Ssid, len); ++ ++ wrqu->essid.flags = 1; ++ } ++ else ++ { ++ ret = -1; ++ goto exit; ++ } ++ ++exit: ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_set_rate(struct net_device *dev, ++ struct iw_request_info *a, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int i, ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 datarates[NumRates]; ++ u32 target_rate = wrqu->bitrate.value; ++ u32 fixed = wrqu->bitrate.fixed; ++ u32 ratevalue = 0; ++ u8 mpdatarate[NumRates]={11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0xff}; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,(" rtw_wx_set_rate \n")); ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("target_rate = %d, fixed = %d\n",target_rate,fixed)); ++ ++ if(target_rate == -1){ ++ ratevalue = 11; ++ goto set_rate; ++ } ++ target_rate = target_rate/100000; ++ ++ switch(target_rate){ ++ case 10: ++ ratevalue = 0; ++ break; ++ case 20: ++ ratevalue = 1; ++ break; ++ case 55: ++ ratevalue = 2; ++ break; ++ case 60: ++ ratevalue = 3; ++ break; ++ case 90: ++ ratevalue = 4; ++ break; ++ case 110: ++ ratevalue = 5; ++ break; ++ case 120: ++ ratevalue = 6; ++ break; ++ case 180: ++ ratevalue = 7; ++ break; ++ case 240: ++ ratevalue = 8; ++ break; ++ case 360: ++ ratevalue = 9; ++ break; ++ case 480: ++ ratevalue = 10; ++ break; ++ case 540: ++ ratevalue = 11; ++ break; ++ default: ++ ratevalue = 11; ++ break; ++ } ++ ++set_rate: ++ ++ for(i=0; ibitrate.fixed = 0; /* no auto select */ ++ wrqu->bitrate.value = max_rate * 100000; ++ ++ return 0; ++} ++ ++static int rtw_wx_set_rts(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ _func_enter_; ++ ++ if (wrqu->rts.disabled) ++ padapter->registrypriv.rts_thresh = 2347; ++ else { ++ if (wrqu->rts.value < 0 || ++ wrqu->rts.value > 2347) ++ return -EINVAL; ++ ++ padapter->registrypriv.rts_thresh = wrqu->rts.value; ++ } ++ ++ DBG_871X("%s, rts_thresh=%d\n", __func__, padapter->registrypriv.rts_thresh); ++ ++ _func_exit_; ++ ++ return 0; ++ ++} ++ ++static int rtw_wx_get_rts(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ _func_enter_; ++ ++ DBG_871X("%s, rts_thresh=%d\n", __func__, padapter->registrypriv.rts_thresh); ++ ++ wrqu->rts.value = padapter->registrypriv.rts_thresh; ++ wrqu->rts.fixed = 0; /* no auto select */ ++ //wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD); ++ ++ _func_exit_; ++ ++ return 0; ++} ++ ++static int rtw_wx_set_frag(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ _func_enter_; ++ ++ if (wrqu->frag.disabled) ++ padapter->xmitpriv.frag_len = MAX_FRAG_THRESHOLD; ++ else { ++ if (wrqu->frag.value < MIN_FRAG_THRESHOLD || ++ wrqu->frag.value > MAX_FRAG_THRESHOLD) ++ return -EINVAL; ++ ++ padapter->xmitpriv.frag_len = wrqu->frag.value & ~0x1; ++ } ++ ++ DBG_871X("%s, frag_len=%d\n", __func__, padapter->xmitpriv.frag_len); ++ ++ _func_exit_; ++ ++ return 0; ++ ++} ++ ++static int rtw_wx_get_frag(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ _func_enter_; ++ ++ DBG_871X("%s, frag_len=%d\n", __func__, padapter->xmitpriv.frag_len); ++ ++ wrqu->frag.value = padapter->xmitpriv.frag_len; ++ wrqu->frag.fixed = 0; /* no auto select */ ++ //wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FRAG_THRESHOLD); ++ ++ _func_exit_; ++ ++ return 0; ++} ++ ++static int rtw_wx_get_retry(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ //_adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ ++ wrqu->retry.value = 7; ++ wrqu->retry.fixed = 0; /* no auto select */ ++ wrqu->retry.disabled = 1; ++ ++ return 0; ++ ++} ++ ++#if 0 ++#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ ++#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ ++#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ ++#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ ++#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ ++#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ ++#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ ++#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ ++#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ ++/* ++iwconfig wlan0 key on -> flags = 0x6001 -> maybe it means auto ++iwconfig wlan0 key off -> flags = 0x8800 ++iwconfig wlan0 key open -> flags = 0x2800 ++iwconfig wlan0 key open 1234567890 -> flags = 0x2000 ++iwconfig wlan0 key restricted -> flags = 0x4800 ++iwconfig wlan0 key open [3] 1234567890 -> flags = 0x2003 ++iwconfig wlan0 key restricted [2] 1234567890 -> flags = 0x4002 ++iwconfig wlan0 key open [3] -> flags = 0x2803 ++iwconfig wlan0 key restricted [2] -> flags = 0x4802 ++*/ ++#endif ++ ++static int rtw_wx_set_enc(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *keybuf) ++{ ++ u32 key, ret = 0; ++ u32 keyindex_provided; ++ NDIS_802_11_WEP wep; ++ NDIS_802_11_AUTHENTICATION_MODE authmode; ++ ++ struct iw_point *erq = &(wrqu->encoding); ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ DBG_871X("+rtw_wx_set_enc, flags=0x%x\n", erq->flags); ++ ++ _rtw_memset(&wep, 0, sizeof(NDIS_802_11_WEP)); ++ ++ key = erq->flags & IW_ENCODE_INDEX; ++ ++ _func_enter_; ++ ++ if (erq->flags & IW_ENCODE_DISABLED) ++ { ++ DBG_871X("EncryptionDisabled\n"); ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system ++ authmode = Ndis802_11AuthModeOpen; ++ padapter->securitypriv.ndisauthtype=authmode; ++ ++ goto exit; ++ } ++ ++ if (key) { ++ if (key > WEP_KEYS) ++ return -EINVAL; ++ key--; ++ keyindex_provided = 1; ++ } ++ else ++ { ++ keyindex_provided = 0; ++ key = padapter->securitypriv.dot11PrivacyKeyIndex; ++ DBG_871X("rtw_wx_set_enc, key=%d\n", key); ++ } ++ ++ //set authentication mode ++ if(erq->flags & IW_ENCODE_OPEN) ++ { ++ DBG_871X("rtw_wx_set_enc():IW_ENCODE_OPEN\n"); ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;//Ndis802_11EncryptionDisabled; ++ ++#ifdef CONFIG_PLATFORM_MT53XX ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++#else ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; ++#endif ++ ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ authmode = Ndis802_11AuthModeOpen; ++ padapter->securitypriv.ndisauthtype=authmode; ++ } ++ else if(erq->flags & IW_ENCODE_RESTRICTED) ++ { ++ DBG_871X("rtw_wx_set_enc():IW_ENCODE_RESTRICTED\n"); ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ ++#ifdef CONFIG_PLATFORM_MT53XX ++ padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto; ++#else ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Shared; ++#endif ++ ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_; ++ authmode = Ndis802_11AuthModeShared; ++ padapter->securitypriv.ndisauthtype=authmode; ++ } ++ else ++ { ++ DBG_871X("rtw_wx_set_enc():erq->flags=0x%x\n", erq->flags); ++ ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;//Ndis802_11EncryptionDisabled; ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ authmode = Ndis802_11AuthModeOpen; ++ padapter->securitypriv.ndisauthtype=authmode; ++ } ++ ++ wep.KeyIndex = key; ++ if (erq->length > 0) ++ { ++ wep.KeyLength = erq->length <= 5 ? 5 : 13; ++ ++ wep.Length = wep.KeyLength + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial); ++ } ++ else ++ { ++ wep.KeyLength = 0 ; ++ ++ if(keyindex_provided == 1)// set key_id only, no given KeyMaterial(erq->length==0). ++ { ++ padapter->securitypriv.dot11PrivacyKeyIndex = key; ++ ++ DBG_871X("(keyindex_provided == 1), keyid=%d, key_len=%d\n", key, padapter->securitypriv.dot11DefKeylen[key]); ++ ++ switch(padapter->securitypriv.dot11DefKeylen[key]) ++ { ++ case 5: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_; ++ break; ++ case 13: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_; ++ break; ++ default: ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ break; ++ } ++ ++ goto exit; ++ ++ } ++ ++ } ++ ++ wep.KeyIndex |= 0x80000000; ++ ++ _rtw_memcpy(wep.KeyMaterial, keybuf, wep.KeyLength); ++ ++ if (rtw_set_802_11_add_wep(padapter, &wep) == _FALSE) { ++ if(rf_on == pwrpriv->rf_pwrstate ) ++ ret = -EOPNOTSUPP; ++ goto exit; ++ } ++ ++exit: ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_get_enc(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *keybuf) ++{ ++ uint key, ret =0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *erq = &(wrqu->encoding); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ _func_enter_; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) ++ { ++ if(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE) ++ { ++ erq->length = 0; ++ erq->flags |= IW_ENCODE_DISABLED; ++ return 0; ++ } ++ } ++ ++ ++ key = erq->flags & IW_ENCODE_INDEX; ++ ++ if (key) { ++ if (key > WEP_KEYS) ++ return -EINVAL; ++ key--; ++ } else ++ { ++ key = padapter->securitypriv.dot11PrivacyKeyIndex; ++ } ++ ++ erq->flags = key + 1; ++ ++ //if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeOpen) ++ //{ ++ // erq->flags |= IW_ENCODE_OPEN; ++ //} ++ ++ switch(padapter->securitypriv.ndisencryptstatus) ++ { ++ case Ndis802_11EncryptionNotSupported: ++ case Ndis802_11EncryptionDisabled: ++ ++ erq->length = 0; ++ erq->flags |= IW_ENCODE_DISABLED; ++ ++ break; ++ ++ case Ndis802_11Encryption1Enabled: ++ ++ erq->length = padapter->securitypriv.dot11DefKeylen[key]; ++ ++ if(erq->length) ++ { ++ _rtw_memcpy(keybuf, padapter->securitypriv.dot11DefKey[key].skey, padapter->securitypriv.dot11DefKeylen[key]); ++ ++ erq->flags |= IW_ENCODE_ENABLED; ++ ++ if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeOpen) ++ { ++ erq->flags |= IW_ENCODE_OPEN; ++ } ++ else if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeShared) ++ { ++ erq->flags |= IW_ENCODE_RESTRICTED; ++ } ++ } ++ else ++ { ++ erq->length = 0; ++ erq->flags |= IW_ENCODE_DISABLED; ++ } ++ ++ break; ++ ++ case Ndis802_11Encryption2Enabled: ++ case Ndis802_11Encryption3Enabled: ++ ++ erq->length = 16; ++ erq->flags |= (IW_ENCODE_ENABLED | IW_ENCODE_OPEN | IW_ENCODE_NOKEY); ++ ++ break; ++ ++ default: ++ erq->length = 0; ++ erq->flags |= IW_ENCODE_DISABLED; ++ ++ break; ++ ++ } ++ ++ _func_exit_; ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_get_power(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ //_adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ wrqu->power.value = 0; ++ wrqu->power.fixed = 0; /* no auto select */ ++ wrqu->power.disabled = 1; ++ ++ return 0; ++ ++} ++ ++static int rtw_wx_set_gen_ie(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ ret = rtw_set_wpa_ie(padapter, extra, wrqu->data.length); ++ ++ return ret; ++} ++ ++static int rtw_wx_set_auth(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_param *param = (struct iw_param*)&(wrqu->param); ++ int ret = 0; ++ ++ switch (param->flags & IW_AUTH_INDEX) { ++ case IW_AUTH_WPA_VERSION: ++ break; ++ case IW_AUTH_CIPHER_PAIRWISE: ++ ++ break; ++ case IW_AUTH_CIPHER_GROUP: ++ ++ break; ++ case IW_AUTH_KEY_MGMT: ++ /* ++ * ??? does not use these parameters ++ */ ++ break; ++ ++ case IW_AUTH_TKIP_COUNTERMEASURES: ++ { ++ if ( param->value ) ++ { // wpa_supplicant is enabling the tkip countermeasure. ++ padapter->securitypriv.btkip_countermeasure = _TRUE; ++ } ++ else ++ { // wpa_supplicant is disabling the tkip countermeasure. ++ padapter->securitypriv.btkip_countermeasure = _FALSE; ++ } ++ break; ++ } ++ case IW_AUTH_DROP_UNENCRYPTED: ++ { ++ /* HACK: ++ * ++ * wpa_supplicant calls set_wpa_enabled when the driver ++ * is loaded and unloaded, regardless of if WPA is being ++ * used. No other calls are made which can be used to ++ * determine if encryption will be used or not prior to ++ * association being expected. If encryption is not being ++ * used, drop_unencrypted is set to false, else true -- we ++ * can use this to determine if the CAP_PRIVACY_ON bit should ++ * be set. ++ */ ++ ++ if(padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption1Enabled) ++ { ++ break;//it means init value, or using wep, ndisencryptstatus = Ndis802_11Encryption1Enabled, ++ // then it needn't reset it; ++ } ++ ++ if(param->value){ ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled; ++ padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_; ++ padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_; ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system ++ padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeOpen; ++ } ++ ++ break; ++ } ++ ++ case IW_AUTH_80211_AUTH_ALG: ++ ++ #if defined(CONFIG_ANDROID) || 1 ++ /* ++ * It's the starting point of a link layer connection using wpa_supplicant ++ */ ++ if(check_fwstate(&padapter->mlmepriv, _FW_LINKED)) { ++ LeaveAllPowerSaveMode(padapter); ++ rtw_disassoc_cmd(padapter, 500, _FALSE); ++ DBG_871X("%s...call rtw_indicate_disconnect\n ",__FUNCTION__); ++ rtw_indicate_disconnect(padapter); ++ rtw_free_assoc_resources(padapter, 1); ++ } ++ #endif ++ ++ ++ ret = wpa_set_auth_algs(dev, (u32)param->value); ++ ++ break; ++ ++ case IW_AUTH_WPA_ENABLED: ++ ++ //if(param->value) ++ // padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_8021X; //802.1x ++ //else ++ // padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Open;//open system ++ ++ //_disassociate(priv); ++ ++ break; ++ ++ case IW_AUTH_RX_UNENCRYPTED_EAPOL: ++ //ieee->ieee802_1x = param->value; ++ break; ++ ++ case IW_AUTH_PRIVACY_INVOKED: ++ //ieee->privacy_invoked = param->value; ++ break; ++ ++ default: ++ return -EOPNOTSUPP; ++ ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_wx_set_enc_ext(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ char *alg_name; ++ u32 param_len; ++ struct ieee_param *param = NULL; ++ struct iw_point *pencoding = &wrqu->encoding; ++ struct iw_encode_ext *pext = (struct iw_encode_ext *)extra; ++ int ret=0; ++ ++ param_len = sizeof(struct ieee_param) + pext->key_len; ++ param = (struct ieee_param *)rtw_malloc(param_len); ++ if (param == NULL) ++ return -1; ++ ++ _rtw_memset(param, 0, param_len); ++ ++ param->cmd = IEEE_CMD_SET_ENCRYPTION; ++ _rtw_memset(param->sta_addr, 0xff, ETH_ALEN); ++ ++ ++ switch (pext->alg) { ++ case IW_ENCODE_ALG_NONE: ++ //todo: remove key ++ //remove = 1; ++ alg_name = "none"; ++ break; ++ case IW_ENCODE_ALG_WEP: ++ alg_name = "WEP"; ++ break; ++ case IW_ENCODE_ALG_TKIP: ++ alg_name = "TKIP"; ++ break; ++ case IW_ENCODE_ALG_CCMP: ++ alg_name = "CCMP"; ++ break; ++#ifdef CONFIG_IEEE80211W ++ case IW_ENCODE_ALG_AES_CMAC: ++ alg_name = "BIP"; ++ break; ++#endif //CONFIG_IEEE80211W ++ default: ++ return -1; ++ } ++ ++ strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN); ++ ++ ++ if((pext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)//? ++#ifdef CONFIG_IEEE80211W ++ || (pext->ext_flags & IW_ENCODE_ALG_AES_CMAC) ++#endif //CONFIG_IEEE80211W ++ ) ++ { ++ param->u.crypt.set_tx = 0; ++ } ++ ++ if (pext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)//? ++ { ++ param->u.crypt.set_tx = 1; ++ } ++ ++ param->u.crypt.idx = (pencoding->flags&0x00FF) -1 ; ++ ++ if (pext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) ++ { ++ _rtw_memcpy(param->u.crypt.seq, pext->rx_seq, 8); ++ } ++ ++ if(pext->key_len) ++ { ++ param->u.crypt.key_len = pext->key_len; ++ //_rtw_memcpy(param + 1, pext + 1, pext->key_len); ++ _rtw_memcpy(param->u.crypt.key, pext + 1, pext->key_len); ++ } ++ ++ ++ if (pencoding->flags & IW_ENCODE_DISABLED) ++ { ++ //todo: remove key ++ //remove = 1; ++ } ++ ++ ret = wpa_set_encryption(dev, param, param_len); ++ ++ ++ if(param) ++ { ++ rtw_mfree((u8*)param, param_len); ++ } ++ ++ ++ return ret; ++ ++} ++ ++ ++static int rtw_wx_get_nick(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ //_adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ //struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ //struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ if(extra) ++ { ++ wrqu->data.length = 14; ++ wrqu->data.flags = 1; ++ _rtw_memcpy(extra, "", 14); ++ } ++ ++ //rtw_signal_process(pid, SIGUSR1); //for test ++ ++ //dump debug info here ++/* ++ u32 dot11AuthAlgrthm; // 802.11 auth, could be open, shared, and 8021x ++ u32 dot11PrivacyAlgrthm; // This specify the privacy for shared auth. algorithm. ++ u32 dot118021XGrpPrivacy; // This specify the privacy algthm. used for Grp key ++ u32 ndisauthtype; ++ u32 ndisencryptstatus; ++*/ ++ ++ //DBG_871X("auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", ++ // psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm, ++ // psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus); ++ ++ //DBG_871X("enc_alg=0x%x\n", psecuritypriv->dot11PrivacyAlgrthm); ++ //DBG_871X("auth_type=0x%x\n", psecuritypriv->ndisauthtype); ++ //DBG_871X("enc_type=0x%x\n", psecuritypriv->ndisencryptstatus); ++ ++#if 0 ++ DBG_871X("dbg(0x210)=0x%x\n", rtw_read32(padapter, 0x210)); ++ DBG_871X("dbg(0x608)=0x%x\n", rtw_read32(padapter, 0x608)); ++ DBG_871X("dbg(0x280)=0x%x\n", rtw_read32(padapter, 0x280)); ++ DBG_871X("dbg(0x284)=0x%x\n", rtw_read32(padapter, 0x284)); ++ DBG_871X("dbg(0x288)=0x%x\n", rtw_read32(padapter, 0x288)); ++ ++ DBG_871X("dbg(0x664)=0x%x\n", rtw_read32(padapter, 0x664)); ++ ++ ++ DBG_871X("\n"); ++ ++ DBG_871X("dbg(0x430)=0x%x\n", rtw_read32(padapter, 0x430)); ++ DBG_871X("dbg(0x438)=0x%x\n", rtw_read32(padapter, 0x438)); ++ ++ DBG_871X("dbg(0x440)=0x%x\n", rtw_read32(padapter, 0x440)); ++ ++ DBG_871X("dbg(0x458)=0x%x\n", rtw_read32(padapter, 0x458)); ++ ++ DBG_871X("dbg(0x484)=0x%x\n", rtw_read32(padapter, 0x484)); ++ DBG_871X("dbg(0x488)=0x%x\n", rtw_read32(padapter, 0x488)); ++ ++ DBG_871X("dbg(0x444)=0x%x\n", rtw_read32(padapter, 0x444)); ++ DBG_871X("dbg(0x448)=0x%x\n", rtw_read32(padapter, 0x448)); ++ DBG_871X("dbg(0x44c)=0x%x\n", rtw_read32(padapter, 0x44c)); ++ DBG_871X("dbg(0x450)=0x%x\n", rtw_read32(padapter, 0x450)); ++#endif ++ ++ return 0; ++ ++} ++ ++static int rtw_wx_read32(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ PADAPTER padapter; ++ struct iw_point *p; ++ u16 len; ++ u32 addr; ++ u32 data32; ++ u32 bytes; ++ u8 *ptmp; ++ ++ ++ padapter = (PADAPTER)rtw_netdev_priv(dev); ++ p = &wrqu->data; ++ len = p->length; ++ ptmp = (u8*)rtw_malloc(len); ++ if (NULL == ptmp) ++ return -ENOMEM; ++ ++ if (copy_from_user(ptmp, p->pointer, len)) { ++ rtw_mfree(ptmp, len); ++ return -EFAULT; ++ } ++ ++ bytes = 0; ++ addr = 0; ++ sscanf(ptmp, "%d,%x", &bytes, &addr); ++ ++ switch (bytes) { ++ case 1: ++ data32 = rtw_read8(padapter, addr); ++ sprintf(extra, "0x%02X", data32); ++ break; ++ case 2: ++ data32 = rtw_read16(padapter, addr); ++ sprintf(extra, "0x%04X", data32); ++ break; ++ case 4: ++ data32 = rtw_read32(padapter, addr); ++ sprintf(extra, "0x%08X", data32); ++ break; ++ default: ++ printk(KERN_INFO "%s: usage> read [bytes],[address(hex)]\n", __func__); ++ return -EINVAL; ++ } ++ printk(KERN_INFO "%s: addr=0x%08X data=%s\n", __func__, addr, extra); ++ ++ rtw_mfree(ptmp, len); ++ ++ return 0; ++} ++ ++static int rtw_wx_write32(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ PADAPTER padapter = (PADAPTER)rtw_netdev_priv(dev); ++ ++ u32 addr; ++ u32 data32; ++ u32 bytes; ++ ++ ++ bytes = 0; ++ addr = 0; ++ data32 = 0; ++ sscanf(extra, "%d,%x,%x", &bytes, &addr, &data32); ++ ++ switch (bytes) { ++ case 1: ++ rtw_write8(padapter, addr, (u8)data32); ++ printk(KERN_INFO "%s: addr=0x%08X data=0x%02X\n", __func__, addr, (u8)data32); ++ break; ++ case 2: ++ rtw_write16(padapter, addr, (u16)data32); ++ printk(KERN_INFO "%s: addr=0x%08X data=0x%04X\n", __func__, addr, (u16)data32); ++ break; ++ case 4: ++ rtw_write32(padapter, addr, data32); ++ printk(KERN_INFO "%s: addr=0x%08X data=0x%08X\n", __func__, addr, data32); ++ break; ++ default: ++ printk(KERN_INFO "%s: usage> write [bytes],[address(hex)],[data(hex)]\n", __func__); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int rtw_wx_read_rf(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u32 path, addr, data32; ++ ++ ++ path = *(u32*)extra; ++ addr = *((u32*)extra + 1); ++ data32 = rtw_hal_read_rfreg(padapter, path, addr, 0xFFFFF); ++// DBG_871X("%s: path=%d addr=0x%02x data=0x%05x\n", __func__, path, addr, data32); ++ /* ++ * IMPORTANT!! ++ * Only when wireless private ioctl is at odd order, ++ * "extra" would be copied to user space. ++ */ ++ sprintf(extra, "0x%05x", data32); ++ ++ return 0; ++} ++ ++static int rtw_wx_write_rf(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u32 path, addr, data32; ++ ++ ++ path = *(u32*)extra; ++ addr = *((u32*)extra + 1); ++ data32 = *((u32*)extra + 2); ++// DBG_871X("%s: path=%d addr=0x%02x data=0x%05x\n", __func__, path, addr, data32); ++ rtw_hal_write_rfreg(padapter, path, addr, 0xFFFFF, data32); ++ ++ return 0; ++} ++ ++static int rtw_wx_priv_null(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *b) ++{ ++ return -1; ++} ++ ++static int dummy(struct net_device *dev, struct iw_request_info *a, ++ union iwreq_data *wrqu, char *b) ++{ ++ //_adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ //struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ //DBG_871X("cmd_code=%x, fwstate=0x%x\n", a->cmd, get_fwstate(pmlmepriv)); ++ ++ return -1; ++ ++} ++ ++static int rtw_wx_set_channel_plan(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct registry_priv *pregistrypriv = &padapter->registrypriv; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ extern int rtw_channel_plan; ++ u8 channel_plan_req = (u8) (*((int *)wrqu)); ++ ++ #if 0 ++ rtw_channel_plan = (int)wrqu->data.pointer; ++ pregistrypriv->channel_plan = rtw_channel_plan; ++ pmlmepriv->ChannelPlan = pregistrypriv->channel_plan; ++ #endif ++ ++ if( _SUCCESS == rtw_set_chplan_cmd(padapter, channel_plan_req, 1) ) { ++ DBG_871X("%s set channel_plan = 0x%02X\n", __func__, pmlmepriv->ChannelPlan); ++ } else ++ return -EPERM; ++ ++ return 0; ++} ++ ++static int rtw_wx_set_mtk_wps_probe_ie(struct net_device *dev, ++ struct iw_request_info *a, ++ union iwreq_data *wrqu, char *b) ++{ ++#ifdef CONFIG_PLATFORM_MT53XX ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_, ++ ("WLAN IOCTL: cmd_code=%x, fwstate=0x%x\n", ++ a->cmd, get_fwstate(pmlmepriv))); ++#endif ++ return 0; ++} ++ ++static int rtw_wx_get_sensitivity(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *buf) ++{ ++#ifdef CONFIG_PLATFORM_MT53XX ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ // Modified by Albert 20110914 ++ // This is in dbm format for MTK platform. ++ wrqu->qual.level = padapter->recvpriv.rssi; ++ DBG_871X(" level = %u\n", wrqu->qual.level ); ++#endif ++ return 0; ++} ++ ++static int rtw_wx_set_mtk_wps_ie(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++#ifdef CONFIG_PLATFORM_MT53XX ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ return rtw_set_wpa_ie(padapter, wrqu->data.pointer, wrqu->data.length); ++#else ++ return 0; ++#endif ++} ++ ++/* ++typedef int (*iw_handler)(struct net_device *dev, struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra); ++*/ ++/* ++ * For all data larger than 16 octets, we need to use a ++ * pointer to memory allocated in user space. ++ */ ++static int rtw_drvext_hdl(struct net_device *dev, struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ #if 0 ++struct iw_point ++{ ++ void __user *pointer; /* Pointer to the data (in user space) */ ++ __u16 length; /* number of fields or size in bytes */ ++ __u16 flags; /* Optional params */ ++}; ++ #endif ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ u8 res; ++ struct drvext_handler *phandler; ++ struct drvext_oidparam *poidparam; ++ int ret; ++ u16 len; ++ u8 *pparmbuf, bset; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *p = &wrqu->data; ++ ++ if( (!p->length) || (!p->pointer)){ ++ ret = -EINVAL; ++ goto _rtw_drvext_hdl_exit; ++ } ++ ++ ++ bset = (u8)(p->flags&0xFFFF); ++ len = p->length; ++ pparmbuf = (u8*)rtw_malloc(len); ++ if (pparmbuf == NULL){ ++ ret = -ENOMEM; ++ goto _rtw_drvext_hdl_exit; ++ } ++ ++ if(bset)//set info ++ { ++ if (copy_from_user(pparmbuf, p->pointer,len)) { ++ rtw_mfree(pparmbuf, len); ++ ret = -EFAULT; ++ goto _rtw_drvext_hdl_exit; ++ } ++ } ++ else//query info ++ { ++ ++ } ++ ++ ++ // ++ poidparam = (struct drvext_oidparam *)pparmbuf; ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("drvext set oid subcode [%d], len[%d], InformationBufferLength[%d]\r\n", ++ poidparam->subcode, poidparam->len, len)); ++ ++ ++ //check subcode ++ if ( poidparam->subcode >= MAX_DRVEXT_HANDLERS) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext handlers\r\n")); ++ ret = -EINVAL; ++ goto _rtw_drvext_hdl_exit; ++ } ++ ++ ++ if ( poidparam->subcode >= MAX_DRVEXT_OID_SUBCODES) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext subcodes\r\n")); ++ ret = -EINVAL; ++ goto _rtw_drvext_hdl_exit; ++ } ++ ++ ++ phandler = drvextoidhandlers + poidparam->subcode; ++ ++ if (poidparam->len != phandler->parmsize) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext param size %d vs %d\r\n", ++ poidparam->len , phandler->parmsize)); ++ ret = -EINVAL; ++ goto _rtw_drvext_hdl_exit; ++ } ++ ++ ++ res = phandler->handler(&padapter->drvextpriv, bset, poidparam->data); ++ ++ if(res==0) ++ { ++ ret = 0; ++ ++ if (bset == 0x00) {//query info ++ //_rtw_memcpy(p->pointer, pparmbuf, len); ++ if (copy_to_user(p->pointer, pparmbuf, len)) ++ ret = -EFAULT; ++ } ++ } ++ else ++ ret = -EFAULT; ++ ++ ++_rtw_drvext_hdl_exit: ++ ++ return ret; ++ ++#endif ++ ++ return 0; ++ ++} ++ ++static void rtw_dbg_mode_hdl(_adapter *padapter, u32 id, u8 *pdata, u32 len) ++{ ++ pRW_Reg RegRWStruct; ++ struct rf_reg_param *prfreg; ++ u8 path; ++ u8 offset; ++ u32 value; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ switch(id) ++ { ++ case GEN_MP_IOCTL_SUBCODE(MP_START): ++ DBG_871X("871x_driver is only for normal mode, can't enter mp mode\n"); ++ break; ++ case GEN_MP_IOCTL_SUBCODE(READ_REG): ++ RegRWStruct = (pRW_Reg)pdata; ++ switch (RegRWStruct->width) ++ { ++ case 1: ++ RegRWStruct->value = rtw_read8(padapter, RegRWStruct->offset); ++ break; ++ case 2: ++ RegRWStruct->value = rtw_read16(padapter, RegRWStruct->offset); ++ break; ++ case 4: ++ RegRWStruct->value = rtw_read32(padapter, RegRWStruct->offset); ++ break; ++ default: ++ break; ++ } ++ ++ break; ++ case GEN_MP_IOCTL_SUBCODE(WRITE_REG): ++ RegRWStruct = (pRW_Reg)pdata; ++ switch (RegRWStruct->width) ++ { ++ case 1: ++ rtw_write8(padapter, RegRWStruct->offset, (u8)RegRWStruct->value); ++ break; ++ case 2: ++ rtw_write16(padapter, RegRWStruct->offset, (u16)RegRWStruct->value); ++ break; ++ case 4: ++ rtw_write32(padapter, RegRWStruct->offset, (u32)RegRWStruct->value); ++ break; ++ default: ++ break; ++ } ++ ++ break; ++ case GEN_MP_IOCTL_SUBCODE(READ_RF_REG): ++ ++ prfreg = (struct rf_reg_param *)pdata; ++ ++ path = (u8)prfreg->path; ++ offset = (u8)prfreg->offset; ++ ++ value = rtw_hal_read_rfreg(padapter, path, offset, 0xffffffff); ++ ++ prfreg->value = value; ++ ++ break; ++ case GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG): ++ ++ prfreg = (struct rf_reg_param *)pdata; ++ ++ path = (u8)prfreg->path; ++ offset = (u8)prfreg->offset; ++ value = prfreg->value; ++ ++ rtw_hal_write_rfreg(padapter, path, offset, 0xffffffff, value); ++ ++ break; ++ case GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO): ++ DBG_871X("==> trigger gpio 0\n"); ++ rtw_hal_set_hwreg(padapter, HW_VAR_TRIGGER_GPIO_0, 0); ++ break; ++#ifdef CONFIG_BT_COEXIST ++ case GEN_MP_IOCTL_SUBCODE(SET_DM_BT): ++ DBG_871X("==> set dm_bt_coexist:%x\n",*(u8 *)pdata); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BT_SET_COEXIST, pdata); ++ break; ++ case GEN_MP_IOCTL_SUBCODE(DEL_BA): ++ DBG_871X("==> delete ba:%x\n",*(u8 *)pdata); ++ rtw_hal_set_hwreg(padapter, HW_VAR_BT_ISSUE_DELBA, pdata); ++ break; ++#endif ++#ifdef DBG_CONFIG_ERROR_DETECT ++ case GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS): ++ *pdata = rtw_hal_sreset_get_wifi_status(padapter); ++ break; ++#endif ++ ++ default: ++ break; ++ } ++ ++} ++ ++static int rtw_mp_ioctl_hdl(struct net_device *dev, struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ u32 BytesRead, BytesWritten, BytesNeeded; ++ struct oid_par_priv oid_par; ++ struct mp_ioctl_handler *phandler; ++ struct mp_ioctl_param *poidparam; ++ uint status=0; ++ u16 len; ++ u8 *pparmbuf = NULL, bset; ++ PADAPTER padapter = (PADAPTER)rtw_netdev_priv(dev); ++ struct iw_point *p = &wrqu->data; ++ ++ //DBG_871X("+rtw_mp_ioctl_hdl\n"); ++ ++ //mutex_lock(&ioctl_mutex); ++ ++ if ((!p->length) || (!p->pointer)) { ++ ret = -EINVAL; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++ pparmbuf = NULL; ++ bset = (u8)(p->flags & 0xFFFF); ++ len = p->length; ++ pparmbuf = (u8*)rtw_malloc(len); ++ if (pparmbuf == NULL){ ++ ret = -ENOMEM; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++ if (copy_from_user(pparmbuf, p->pointer, len)) { ++ ret = -EFAULT; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++ poidparam = (struct mp_ioctl_param *)pparmbuf; ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ++ ("rtw_mp_ioctl_hdl: subcode [%d], len[%d], buffer_len[%d]\r\n", ++ poidparam->subcode, poidparam->len, len)); ++ ++ if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) { ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_, ("no matching drvext subcodes\r\n")); ++ ret = -EINVAL; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++ //DBG_871X("%s: %d\n", __func__, poidparam->subcode); ++ ++#ifdef CONFIG_MP_INCLUDED ++ phandler = mp_ioctl_hdl + poidparam->subcode; ++ ++ if ((phandler->paramsize != 0) && (poidparam->len < phandler->paramsize)) ++ { ++ RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_, ++ ("no matching drvext param size %d vs %d\r\n", ++ poidparam->len, phandler->paramsize)); ++ ret = -EINVAL; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++ if (phandler->handler) ++ { ++ oid_par.adapter_context = padapter; ++ oid_par.oid = phandler->oid; ++ oid_par.information_buf = poidparam->data; ++ oid_par.information_buf_len = poidparam->len; ++ oid_par.dbg = 0; ++ ++ BytesWritten = 0; ++ BytesNeeded = 0; ++ ++ if (bset) { ++ oid_par.bytes_rw = &BytesRead; ++ oid_par.bytes_needed = &BytesNeeded; ++ oid_par.type_of_oid = SET_OID; ++ } else { ++ oid_par.bytes_rw = &BytesWritten; ++ oid_par.bytes_needed = &BytesNeeded; ++ oid_par.type_of_oid = QUERY_OID; ++ } ++ ++ status = phandler->handler(&oid_par); ++ ++ //todo:check status, BytesNeeded, etc. ++ } ++ else { ++ DBG_871X("rtw_mp_ioctl_hdl(): err!, subcode=%d, oid=%d, handler=%p\n", ++ poidparam->subcode, phandler->oid, phandler->handler); ++ ret = -EFAULT; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++#else ++ ++ rtw_dbg_mode_hdl(padapter, poidparam->subcode, poidparam->data, poidparam->len); ++ ++#endif ++ ++ if (bset == 0x00) {//query info ++ if (copy_to_user(p->pointer, pparmbuf, len)) ++ ret = -EFAULT; ++ } ++ ++ if (status) { ++ ret = -EFAULT; ++ goto _rtw_mp_ioctl_hdl_exit; ++ } ++ ++_rtw_mp_ioctl_hdl_exit: ++ ++ if (pparmbuf) ++ rtw_mfree(pparmbuf, len); ++ ++ //mutex_unlock(&ioctl_mutex); ++ ++ return ret; ++} ++ ++static int rtw_get_ap_info(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int bssid_match, ret = 0; ++ u32 cnt=0, wpa_ielen; ++ _irqL irqL; ++ _list *plist, *phead; ++ unsigned char *pbuf; ++ u8 bssid[ETH_ALEN]; ++ char data[32]; ++ struct wlan_network *pnetwork = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct iw_point *pdata = &wrqu->data; ++ ++ DBG_871X("+rtw_get_aplist_info\n"); ++ ++ if((padapter->bDriverStopped) || (pdata==NULL)) ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ ++ while((check_fwstate(pmlmepriv, (_FW_UNDER_SURVEY|_FW_UNDER_LINKING))) == _TRUE) ++ { ++ rtw_msleep_os(30); ++ cnt++; ++ if(cnt > 100) ++ break; ++ } ++ ++ ++ //pdata->length = 0;//? ++ pdata->flags = 0; ++ if(pdata->length>=32) ++ { ++ if(copy_from_user(data, pdata->pointer, 32)) ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ } ++ else ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ //if(hwaddr_aton_i(pdata->pointer, bssid)) ++ if(hwaddr_aton_i(data, bssid)) ++ { ++ DBG_871X("Invalid BSSID '%s'.\n", (u8*)data); ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ return -EINVAL; ++ } ++ ++ ++ if(_rtw_memcmp(bssid, pnetwork->network.MacAddress, ETH_ALEN) == _TRUE)//BSSID match, then check if supporting wpa/wpa2 ++ { ++ DBG_871X("BSSID:" MAC_FMT "\n", MAC_ARG(bssid)); ++ ++ pbuf = rtw_get_wpa_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12); ++ if(pbuf && (wpa_ielen>0)) ++ { ++ pdata->flags = 1; ++ break; ++ } ++ ++ pbuf = rtw_get_wpa2_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12); ++ if(pbuf && (wpa_ielen>0)) ++ { ++ pdata->flags = 2; ++ break; ++ } ++ ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if(pdata->length>=34) ++ { ++ if(copy_to_user((u8*)pdata->pointer+32, (u8*)&pdata->flags, 1)) ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ } ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_set_pid(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = rtw_netdev_priv(dev); ++ int *pdata = (int *)wrqu; ++ int selector; ++ ++ if((padapter->bDriverStopped) || (pdata==NULL)) ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ ++ selector = *pdata; ++ if(selector < 3 && selector >=0) { ++ padapter->pid[selector] = *(pdata+1); ++ #ifdef CONFIG_GLOBAL_UI_PID ++ ui_pid[selector] = *(pdata+1); ++ #endif ++ DBG_871X("%s set pid[%d]=%d\n", __FUNCTION__, selector ,padapter->pid[selector]); ++ } ++ else ++ DBG_871X("%s selector %d error\n", __FUNCTION__, selector); ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_wps_start(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ u32 u32wps_start = 0; ++ unsigned int uintRet = 0; ++ ++ uintRet = copy_from_user( ( void* ) &u32wps_start, pdata->pointer, 4 ); ++ ++ if((padapter->bDriverStopped) || (pdata==NULL)) ++ { ++ ret= -EINVAL; ++ goto exit; ++ } ++ ++ if ( u32wps_start == 0 ) ++ { ++ u32wps_start = *extra; ++ } ++ ++ DBG_871X( "[%s] wps_start = %d\n", __FUNCTION__, u32wps_start ); ++ ++ if ( u32wps_start == 1 ) // WPS Start ++ { ++ rtw_led_control(padapter, LED_CTL_START_WPS); ++ } ++ else if ( u32wps_start == 2 ) // WPS Stop because of wps success ++ { ++ rtw_led_control(padapter, LED_CTL_STOP_WPS); ++ } ++ else if ( u32wps_start == 3 ) // WPS Stop because of wps fail ++ { ++ rtw_led_control(padapter, LED_CTL_STOP_WPS_FAIL); ++ } ++ ++#ifdef CONFIG_INTEL_WIDI ++ process_intel_widi_wps_status(padapter, u32wps_start); ++#endif //CONFIG_INTEL_WIDI ++ ++exit: ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_P2P ++static int rtw_wext_p2p_enable(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ enum P2P_ROLE init_role = P2P_ROLE_DISABLE; ++ ++ if(*extra == '0' ) ++ init_role = P2P_ROLE_DISABLE; ++ else if(*extra == '1') ++ init_role = P2P_ROLE_DEVICE; ++ else if(*extra == '2') ++ init_role = P2P_ROLE_CLIENT; ++ else if(*extra == '3') ++ init_role = P2P_ROLE_GO; ++ ++ if(_FAIL == rtw_p2p_enable(padapter, init_role)) ++ { ++ ret = -EFAULT; ++ goto exit; ++ } ++ ++ //set channel/bandwidth ++ if(init_role != P2P_ROLE_DISABLE) ++ { ++ u8 channel, ch_offset; ++ u16 bwmode; ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN)) ++ { ++ // Stay at the listen state and wait for discovery. ++ channel = pwdinfo->listen_channel; ++ pwdinfo->operating_channel = pwdinfo->listen_channel; ++ ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE; ++ bwmode = HT_CHANNEL_WIDTH_20; ++ } ++#ifdef CONFIG_CONCURRENT_MODE ++ else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE)) ++ { ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ //struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++ ++ _set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_interval ); ++ if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) ) ++ { ++ pwdinfo->operating_channel = pbuddy_mlmeext->cur_channel; ++ // How about the ch_offset and bwmode ?? ++ } ++ else ++ { ++ pwdinfo->operating_channel = pwdinfo->listen_channel; ++ } ++ ++ channel = pbuddy_mlmeext->cur_channel; ++ ch_offset = pbuddy_mlmeext->cur_ch_offset; ++ bwmode = pbuddy_mlmeext->cur_bwmode; ++ } ++#endif ++ else ++ { ++ pwdinfo->operating_channel = pmlmeext->cur_channel; ++ ++ channel = pwdinfo->operating_channel; ++ ch_offset = pmlmeext->cur_ch_offset; ++ bwmode = pmlmeext->cur_bwmode; ++ } ++ ++ set_channel_bwmode(padapter, channel, ch_offset, bwmode); ++ } ++ ++exit: ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_go_nego_ssid(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++ DBG_871X( "[%s] ssid = %s, len = %d\n", __FUNCTION__, extra, (u32)strlen( extra ) ); ++ _rtw_memcpy( pwdinfo->nego_ssid, extra, strlen( extra ) ); ++ pwdinfo->nego_ssidlen = strlen( extra ); ++ ++ return ret; ++ ++} ++ ++ ++static int rtw_p2p_set_intent(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ u8 intent = pwdinfo->intent; ++ ++ extra[ wrqu->data.length ] = 0x00; ++ ++ intent = rtw_atoi( extra ); ++ ++ if ( intent <= 15 ) ++ { ++ pwdinfo->intent= intent; ++ } ++ else ++ { ++ ret = -1; ++ } ++ ++ DBG_871X( "[%s] intent = %d\n", __FUNCTION__, intent); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_listen_ch(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ u8 listen_ch = pwdinfo->listen_channel; // Listen channel number ++ ++ extra[ wrqu->data.length ] = 0x00; ++ listen_ch = rtw_atoi( extra ); ++ ++ if ( ( listen_ch == 1 ) || ( listen_ch == 6 ) || ( listen_ch == 11 ) ) ++ { ++ pwdinfo->listen_channel = listen_ch; ++ set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++ else ++ { ++ ret = -1; ++ } ++ ++ DBG_871X( "[%s] listen_ch = %d\n", __FUNCTION__, pwdinfo->listen_channel ); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_op_ch(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++// Commented by Albert 20110524 ++// This function is used to set the operating channel if the driver will become the group owner ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ u8 op_ch = pwdinfo->operating_channel; // Operating channel number ++ ++ extra[ wrqu->data.length ] = 0x00; ++ ++ op_ch = ( u8 ) rtw_atoi( extra ); ++ if ( op_ch > 0 ) ++ { ++ pwdinfo->operating_channel = op_ch; ++ } ++ else ++ { ++ ret = -1; ++ } ++ ++ DBG_871X( "[%s] op_ch = %d\n", __FUNCTION__, pwdinfo->operating_channel ); ++ ++ return ret; ++ ++} ++ ++ ++static int rtw_p2p_profilefound(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++ // Comment by Albert 2010/10/13 ++ // Input data format: ++ // Ex: 0 ++ // Ex: 1XX:XX:XX:XX:XX:XXYYSSID ++ // 0 => Reflush the profile record list. ++ // 1 => Add the profile list ++ // XX:XX:XX:XX:XX:XX => peer's MAC Address ( ex: 00:E0:4C:00:00:01 ) ++ // YY => SSID Length ++ // SSID => SSID for persistence group ++ ++ DBG_871X( "[%s] In value = %s, len = %d \n", __FUNCTION__, extra, wrqu->data.length -1); ++ ++ ++ // The upper application should pass the SSID to driver by using this rtw_p2p_profilefound function. ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ if ( extra[ 0 ] == '0' ) ++ { ++ // Remove all the profile information of wifidirect_info structure. ++ _rtw_memset( &pwdinfo->profileinfo[ 0 ], 0x00, sizeof( struct profile_info ) * P2P_MAX_PERSISTENT_GROUP_NUM ); ++ pwdinfo->profileindex = 0; ++ } ++ else ++ { ++ if ( pwdinfo->profileindex >= P2P_MAX_PERSISTENT_GROUP_NUM ) ++ { ++ ret = -1; ++ } ++ else ++ { ++ int jj, kk; ++ ++ // Add this profile information into pwdinfo->profileinfo ++ // Ex: 1XX:XX:XX:XX:XX:XXYYSSID ++ for( jj = 0, kk = 1; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ pwdinfo->profileinfo[ pwdinfo->profileindex ].peermac[ jj ] = key_2char2num(extra[ kk ], extra[ kk+ 1 ]); ++ } ++ ++ //pwdinfo->profileinfo[ pwdinfo->profileindex ].ssidlen = ( extra[18] - '0' ) * 10 + ( extra[ 19 ] - '0' ); ++ //_rtw_memcpy( pwdinfo->profileinfo[ pwdinfo->profileindex ].ssid, &extra[ 20 ], pwdinfo->profileinfo[ pwdinfo->profileindex ].ssidlen ); ++ pwdinfo->profileindex++; ++ } ++ } ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_setDN(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++ ++ DBG_871X( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ _rtw_memset( pwdinfo->device_name, 0x00, WPS_MAX_DEVICE_NAME_LEN ); ++ _rtw_memcpy( pwdinfo->device_name, extra, wrqu->data.length - 1 ); ++ pwdinfo->device_name_len = wrqu->data.length - 1; ++ return ret; ++ ++} ++ ++ ++static int rtw_p2p_get_status(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ if ( padapter->bShowGetP2PState ) ++ { ++ DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), ++ pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ], ++ pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]); ++ } ++ ++ // Commented by Albert 2010/10/12 ++ // Because of the output size limitation, I had removed the "Role" information. ++ // About the "Role" information, we will use the new private IOCTL to get the "Role" information. ++ sprintf( extra, "\n\nStatus=%.2d\n", rtw_p2p_state(pwdinfo) ); ++ wrqu->data.length = strlen( extra ); ++ ++ return ret; ++ ++} ++ ++// Commented by Albert 20110520 ++// This function will return the config method description ++// This config method description will show us which config method the remote P2P device is intented to use ++// by sending the provisioning discovery request frame. ++ ++static int rtw_p2p_get_req_cm(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ sprintf( extra, "\n\nCM=%s\n", pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req ); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++ ++static int rtw_p2p_get_role(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), ++ pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ], ++ pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]); ++ ++ sprintf( extra, "\n\nRole=%.2d\n", rtw_p2p_role(pwdinfo) ); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++ ++static int rtw_p2p_get_peer_ifaddr(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), ++ pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ], ++ pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]); ++ ++ sprintf( extra, "\nMAC %.2X:%.2X:%.2X:%.2X:%.2X:%.2X", ++ pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ], ++ pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_peer_devaddr(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++ ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 0 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 1 ], ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 2 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 3 ], ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 4 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 5 ]); ++ sprintf( extra, "\n%.2X%.2X%.2X%.2X%.2X%.2X", ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 0 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 1 ], ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 2 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 3 ], ++ pwdinfo->rx_prov_disc_info.peerDevAddr[ 4 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 5 ]); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_peer_devaddr_by_invitation(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++ ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), ++ pwdinfo->p2p_peer_device_addr[ 0 ], pwdinfo->p2p_peer_device_addr[ 1 ], ++ pwdinfo->p2p_peer_device_addr[ 2 ], pwdinfo->p2p_peer_device_addr[ 3 ], ++ pwdinfo->p2p_peer_device_addr[ 4 ], pwdinfo->p2p_peer_device_addr[ 5 ]); ++ sprintf( extra, "\nMAC %.2X:%.2X:%.2X:%.2X:%.2X:%.2X", ++ pwdinfo->p2p_peer_device_addr[ 0 ], pwdinfo->p2p_peer_device_addr[ 1 ], ++ pwdinfo->p2p_peer_device_addr[ 2 ], pwdinfo->p2p_peer_device_addr[ 3 ], ++ pwdinfo->p2p_peer_device_addr[ 4 ], pwdinfo->p2p_peer_device_addr[ 5 ]); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_groupid(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++ ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ sprintf( extra, "\n%.2X:%.2X:%.2X:%.2X:%.2X:%.2X %s", ++ pwdinfo->groupid_info.go_device_addr[ 0 ], pwdinfo->groupid_info.go_device_addr[ 1 ], ++ pwdinfo->groupid_info.go_device_addr[ 2 ], pwdinfo->groupid_info.go_device_addr[ 3 ], ++ pwdinfo->groupid_info.go_device_addr[ 4 ], pwdinfo->groupid_info.go_device_addr[ 5 ], ++ pwdinfo->groupid_info.ssid); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_op_ch(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++ ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ DBG_871X( "[%s] Op_ch = %02x\n", __FUNCTION__, pwdinfo->operating_channel); ++ ++ sprintf( extra, "\n\nOp_ch=%.2d\n", pwdinfo->operating_channel ); ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++inline static void macstr2num(u8 *dst, u8 *src) ++{ ++ int jj, kk; ++ for (jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3) ++ { ++ dst[jj] = key_2char2num(src[kk], src[kk + 1]); ++ } ++} ++ ++static int rtw_p2p_get_wps_configmethod(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra, char *subcmd) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 peerMAC[ETH_ALEN] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list * plist,*phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 blnMatch = 0; ++ u16 attr_content = 0; ++ uint attr_contentlen = 0; ++ u8 attr_content_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 }; ++ ++ // Commented by Albert 20110727 ++ // The input data is the MAC address which the application wants to know its WPS config method. ++ // After knowing its WPS config method, the application can decide the config method for provisioning discovery. ++ // Format: iwpriv wlanx p2p_get_wpsCM 00:E0:4C:00:00:05 ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd); ++ ++ macstr2num(peerMAC, subcmd); ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, plist) == _TRUE) break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN)) ++ { ++ u8 *wpsie; ++ uint wpsie_len = 0; ++ ++ // The mac address is matched. ++ ++ if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len))) ++ { ++ rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_CONF_METHOD, (u8 *)&attr_content, &attr_contentlen); ++ if (attr_contentlen) ++ { ++ attr_content = be16_to_cpu(attr_content); ++ sprintf(attr_content_str, "\n\nM=%.4d", attr_content); ++ blnMatch = 1; ++ } ++ } ++ ++ break; ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if (!blnMatch) ++ { ++ sprintf(attr_content_str, "\n\nM=0000"); ++ } ++ ++ wrqu->data.length = strlen(attr_content_str); ++ _rtw_memcpy(extra, attr_content_str, wrqu->data.length); ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_WFD ++static int rtw_p2p_get_peer_wfd_port(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ DBG_871X( "[%s] p2p_state = %d\n", __FUNCTION__, rtw_p2p_state(pwdinfo) ); ++ ++ sprintf( extra, "\n\nPort=%d\n", pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ DBG_871X( "[%s] remote port = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport ); ++ ++ wrqu->data.length = strlen( extra ); ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_peer_wfd_preferred_connection(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ sprintf( extra, "\n\nwfd_pc=%d\n", pwdinfo->wfd_info->wfd_pc ); ++ DBG_871X( "[%s] wfd_pc = %d\n", __FUNCTION__, pwdinfo->wfd_info->wfd_pc ); ++ ++ wrqu->data.length = strlen( extra ); ++ pwdinfo->wfd_info->wfd_pc = _FALSE; // Reset the WFD preferred connection to P2P ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_peer_wfd_session_available(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ sprintf( extra, "\n\nwfd_sa=%d\n", pwdinfo->wfd_info->peer_session_avail ); ++ DBG_871X( "[%s] wfd_sa = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_session_avail ); ++ ++ wrqu->data.length = strlen( extra ); ++ pwdinfo->wfd_info->peer_session_avail = _TRUE; // Reset the WFD session available ++ return ret; ++ ++} ++ ++#endif // CONFIG_WFD ++ ++static int rtw_p2p_get_go_device_address(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra, char *subcmd) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 peerMAC[ETH_ALEN] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 blnMatch = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ u8 attr_content[100] = { 0x00 }; ++ u8 go_devadd_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 }; ++ ++ // Commented by Albert 20121209 ++ // The input data is the GO's interface address which the application wants to know its device address. ++ // Format: iwpriv wlanx p2p_get2 go_devadd=00:E0:4C:00:00:05 ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd); ++ ++ macstr2num(peerMAC, subcmd); ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, plist) == _TRUE) break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN)) ++ { ++ // Commented by Albert 2011/05/18 ++ // Match the device address located in the P2P IE ++ // This is for the case that the P2P device address is not the same as the P2P interface address. ++ ++ if ((p2pie = rtw_get_p2p_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen))) ++ { ++ while (p2pie) ++ { ++ // The P2P Device ID attribute is included in the Beacon frame. ++ // The P2P Device Info attribute is included in the probe response frame. ++ ++ _rtw_memset(attr_content, 0x00, 100); ++ if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen)) ++ { ++ // Handle the P2P Device ID attribute of Beacon first ++ blnMatch = 1; ++ break; ++ ++ } else if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen)) ++ { ++ // Handle the P2P Device Info attribute of probe response ++ blnMatch = 1; ++ break; ++ } ++ ++ //Get the next P2P IE ++ p2pie = rtw_get_p2p_ie(p2pie + p2pielen, pnetwork->network.IELength - 12 - (p2pie - &pnetwork->network.IEs[12] + p2pielen), NULL, &p2pielen); ++ } ++ } ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if (!blnMatch) ++ { ++ sprintf(go_devadd_str, "\n\ndev_add=NULL"); ++ } else ++ { ++ sprintf(go_devadd_str, "\n\ndev_add=%.2X:%.2X:%.2X:%.2X:%.2X:%.2X", ++ attr_content[0], attr_content[1], attr_content[2], attr_content[3], attr_content[4], attr_content[5]); ++ } ++ ++ wrqu->data.length = strlen(go_devadd_str); ++ _rtw_memcpy(extra, go_devadd_str, wrqu->data.length); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_device_type(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra, char *subcmd) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 peerMAC[ETH_ALEN] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 blnMatch = 0; ++ u8 dev_type[8] = { 0x00 }; ++ uint dev_type_len = 0; ++ u8 dev_type_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 }; // +9 is for the str "dev_type=", we have to clear it at wrqu->data.pointer ++ ++ // Commented by Albert 20121209 ++ // The input data is the MAC address which the application wants to know its device type. ++ // Such user interface could know the device type. ++ // Format: iwpriv wlanx p2p_get2 dev_type=00:E0:4C:00:00:05 ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd); ++ ++ macstr2num(peerMAC, subcmd); ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, plist) == _TRUE) break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN)) ++ { ++ u8 *wpsie; ++ uint wpsie_len = 0; ++ ++ // The mac address is matched. ++ ++ if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len))) ++ { ++ rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_PRIMARY_DEV_TYPE, dev_type, &dev_type_len); ++ if (dev_type_len) ++ { ++ u16 type = 0; ++ ++ _rtw_memcpy(&type, dev_type, 2); ++ type = be16_to_cpu(type); ++ sprintf(dev_type_str, "\n\nN=%.2d", type); ++ blnMatch = 1; ++ } ++ } ++ break; ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if (!blnMatch) ++ { ++ sprintf(dev_type_str, "\n\nN=00"); ++ } ++ ++ wrqu->data.length = strlen(dev_type_str); ++ _rtw_memcpy(extra, dev_type_str, wrqu->data.length); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_device_name(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra, char *subcmd) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 peerMAC[ETH_ALEN] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 blnMatch = 0; ++ u8 dev_name[WPS_MAX_DEVICE_NAME_LEN] = { 0x00 }; ++ uint dev_len = 0; ++ u8 dev_name_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 }; ++ ++ // Commented by Albert 20121225 ++ // The input data is the MAC address which the application wants to know its device name. ++ // Such user interface could show peer device's device name instead of ssid. ++ // Format: iwpriv wlanx p2p_get2 devN=00:E0:4C:00:00:05 ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd); ++ ++ macstr2num(peerMAC, subcmd); ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, plist) == _TRUE) break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN)) ++ { ++ u8 *wpsie; ++ uint wpsie_len = 0; ++ ++ // The mac address is matched. ++ ++ if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len))) ++ { ++ rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_DEVICE_NAME, dev_name, &dev_len); ++ if (dev_len) ++ { ++ sprintf(dev_name_str, "\n\nN=%s", dev_name); ++ blnMatch = 1; ++ } ++ } ++ break; ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if (!blnMatch) ++ { ++ sprintf(dev_name_str, "\n\nN=0000"); ++ } ++ ++ wrqu->data.length = strlen(dev_name_str); ++ _rtw_memcpy(extra, dev_name_str, wrqu->data.length); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_get_invitation_procedure(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra, char *subcmd) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 peerMAC[ETH_ALEN] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 blnMatch = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ u8 attr_content[2] = { 0x00 }; ++ u8 inv_proc_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 }; ++ ++ // Commented by Ouden 20121226 ++ // The application wants to know P2P initation procedure is support or not. ++ // Format: iwpriv wlanx p2p_get2 InvProc=00:E0:4C:00:00:05 ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd); ++ ++ macstr2num(peerMAC, subcmd); ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while (1) ++ { ++ if (rtw_end_of_queue_search(phead, plist) == _TRUE) break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN)) ++ { ++ // Commented by Albert 20121226 ++ // Match the device address located in the P2P IE ++ // This is for the case that the P2P device address is not the same as the P2P interface address. ++ ++ if ((p2pie = rtw_get_p2p_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen))) ++ { ++ while (p2pie) ++ { ++ //_rtw_memset( attr_content, 0x00, 2); ++ if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_CAPABILITY, attr_content, &attr_contentlen)) ++ { ++ // Handle the P2P capability attribute ++ blnMatch = 1; ++ break; ++ ++ } ++ ++ //Get the next P2P IE ++ p2pie = rtw_get_p2p_ie(p2pie + p2pielen, pnetwork->network.IELength - 12 - (p2pie - &pnetwork->network.IEs[12] + p2pielen), NULL, &p2pielen); ++ } ++ } ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if (!blnMatch) ++ { ++ sprintf(inv_proc_str, "\nIP=-1"); ++ } else ++ { ++ if (attr_content[0] && 0x20) ++ { ++ sprintf(inv_proc_str, "\nIP=1"); ++ } else ++ { ++ sprintf(inv_proc_str, "\nIP=0"); ++ } ++ } ++ ++ wrqu->data.length = strlen(inv_proc_str); ++ _rtw_memcpy(extra, inv_proc_str, wrqu->data.length); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_connect(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ u8 peerMAC[ ETH_ALEN ] = { 0x00 }; ++ int jj,kk; ++ u8 peerMACStr[ ETH_ALEN * 2 ] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _irqL irqL; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ uint uintPeerChannel = 0; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif // CONFIG_CONCURRENT_MODE ++ ++ ++ // Commented by Albert 20110304 ++ // The input data contains two informations. ++ // 1. First information is the MAC address which wants to formate with ++ // 2. Second information is the WPS PINCode or "pbc" string for push button method ++ // Format: 00:E0:4C:00:00:05 ++ // Format: 00:E0:4C:00:00:05 ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ ++ if ( pwdinfo->ui_got_wps_info == P2P_NO_WPSINFO ) ++ { ++ return -1; ++ } ++ ++ for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] ); ++ } ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ if ( _rtw_memcmp( pnetwork->network.MacAddress, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if ( uintPeerChannel ) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer ); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ _rtw_memset( &pwdinfo->nego_req_info, 0x00, sizeof( struct tx_nego_req_info ) ); ++ _rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) ); ++ ++ pwdinfo->nego_req_info.peer_channel_num[ 0 ] = uintPeerChannel; ++ _rtw_memcpy( pwdinfo->nego_req_info.peerDevAddr, pnetwork->network.MacAddress, ETH_ALEN ); ++ pwdinfo->nego_req_info.benable = _TRUE; ++ ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ if ( rtw_p2p_state(pwdinfo) != P2P_STATE_GONEGO_OK ) ++ { ++ // Restore to the listen state if the current p2p state is not nego OK ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN ); ++ } ++ ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_ING); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ // Have to enter the power saving with the AP ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ DBG_871X( "[%s] Start PreTx Procedure!\n", __FUNCTION__ ); ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_GO_NEGO_TIMEOUT ); ++ } ++ else ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT ); ++ } ++#else ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT ); ++#endif // CONFIG_CONCURRENT_MODE ++ ++ } ++ else ++ { ++ DBG_871X( "[%s] Not Found in Scanning Queue~\n", __FUNCTION__ ); ++ ret = -1; ++ } ++exit: ++ return ret; ++} ++ ++static int rtw_p2p_invite_req(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ int jj,kk; ++ u8 peerMACStr[ ETH_ALEN * 2 ] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ uint uintPeerChannel = 0; ++ u8 attr_content[50] = { 0x00 }, _status = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ _irqL irqL; ++ struct tx_invite_req_info* pinvite_req_info = &pwdinfo->invitereq_info; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif // CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_WFD ++ struct wifi_display_info* pwfd_info = pwdinfo->wfd_info; ++#endif // CONFIG_WFD ++ ++ // Commented by Albert 20120321 ++ // The input data contains two informations. ++ // 1. First information is the P2P device address which you want to send to. ++ // 2. Second information is the group id which combines with GO's mac address, space and GO's ssid. ++ // Command line sample: iwpriv wlan0 p2p_set invite="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy" ++ // Format: 00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if ( wrqu->data.length <= 37 ) ++ { ++ DBG_871X( "[%s] Wrong format!\n", __FUNCTION__ ); ++ return ret; ++ } ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ else ++ { ++ // Reset the content of struct tx_invite_req_info ++ pinvite_req_info->benable = _FALSE; ++ _rtw_memset( pinvite_req_info->go_bssid, 0x00, ETH_ALEN ); ++ _rtw_memset( pinvite_req_info->go_ssid, 0x00, WLAN_SSID_MAXLEN ); ++ pinvite_req_info->ssidlen = 0x00; ++ pinvite_req_info->operating_ch = pwdinfo->operating_channel; ++ _rtw_memset( pinvite_req_info->peer_macaddr, 0x00, ETH_ALEN ); ++ pinvite_req_info->token = 3; ++ } ++ ++ for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ pinvite_req_info->peer_macaddr[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] ); ++ } ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ // Commented by Albert 2011/05/18 ++ // Match the device address located in the P2P IE ++ // This is for the case that the P2P device address is not the same as the P2P interface address. ++ ++ if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)) ) ++ { ++ // The P2P Device ID attribute is included in the Beacon frame. ++ // The P2P Device Info attribute is included in the probe response frame. ++ ++ if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device ID attribute of Beacon first ++ if ( _rtw_memcmp( attr_content, pinvite_req_info->peer_macaddr, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device Info attribute of probe response ++ if ( _rtw_memcmp( attr_content, pinvite_req_info->peer_macaddr, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++#ifdef CONFIG_WFD ++ if ( uintPeerChannel ) ++ { ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ uint wfd_ielen = 0; ++ ++ if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 wfd_devinfo[ 6 ] = { 0x00 }; ++ uint wfd_devlen = 6; ++ ++ DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ ); ++ if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) ) ++ { ++ u16 wfd_devinfo_field = 0; ++ ++ // Commented by Albert 20120319 ++ // The first two bytes are the WFD device information field of WFD device information subelement. ++ // In big endian format. ++ wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo); ++ if ( wfd_devinfo_field & WFD_DEVINFO_SESSION_AVAIL ) ++ { ++ pwfd_info->peer_session_avail = _TRUE; ++ } ++ else ++ { ++ pwfd_info->peer_session_avail = _FALSE; ++ } ++ } ++ } ++ ++ if ( _FALSE == pwfd_info->peer_session_avail ) ++ { ++ DBG_871X( "[%s] WFD Session not avaiable!\n", __FUNCTION__ ); ++ goto exit; ++ } ++ } ++#endif // CONFIG_WFD ++ ++ if ( uintPeerChannel ) ++ { ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) ) ++ { ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer ); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ ++ // Store the GO's bssid ++ for( jj = 0, kk = 18; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ pinvite_req_info->go_bssid[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] ); ++ } ++ ++ // Store the GO's ssid ++ pinvite_req_info->ssidlen = wrqu->data.length - 36; ++ _rtw_memcpy( pinvite_req_info->go_ssid, &extra[ 36 ], (u32) pinvite_req_info->ssidlen ); ++ pinvite_req_info->benable = _TRUE; ++ pinvite_req_info->peer_ch = uintPeerChannel; ++ ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_INVITE_REQ); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) ) ++ { ++ // Have to enter the power saving with the AP ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500); ++ } ++ else ++ { ++ set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++#else ++ set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++#endif ++ ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) ) ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_INVITE_TIMEOUT ); ++ } ++ else ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT ); ++ } ++#else ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT ); ++#endif // CONFIG_CONCURRENT_MODE ++ ++ ++ } ++ else ++ { ++ DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ ); ++ } ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_persistent(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ int jj,kk; ++ u8 peerMACStr[ ETH_ALEN * 2 ] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ uint uintPeerChannel = 0; ++ u8 attr_content[50] = { 0x00 }, _status = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ _irqL irqL; ++ struct tx_invite_req_info* pinvite_req_info = &pwdinfo->invitereq_info; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif // CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_WFD ++ struct wifi_display_info* pwfd_info = pwdinfo->wfd_info; ++#endif // CONFIG_WFD ++ ++ // Commented by Albert 20120328 ++ // The input data is 0 or 1 ++ // 0: disable persistent group functionality ++ // 1: enable persistent group founctionality ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ else ++ { ++ if ( extra[ 0 ] == '0' ) // Disable the persistent group function. ++ { ++ pwdinfo->persistent_supported = _FALSE; ++ } ++ else if ( extra[ 0 ] == '1' ) // Enable the persistent group function. ++ { ++ pwdinfo->persistent_supported = _TRUE; ++ } ++ else ++ { ++ pwdinfo->persistent_supported = _FALSE; ++ } ++ } ++ printk( "[%s] persistent_supported = %d\n", __FUNCTION__, pwdinfo->persistent_supported ); ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int hexstr2bin(const char *hex, u8 *buf, size_t len) ++{ ++ size_t i; ++ int a; ++ const char *ipos = hex; ++ u8 *opos = buf; ++ ++ for (i = 0; i < len; i++) { ++ a = hex2byte_i(ipos); ++ if (a < 0) ++ return -1; ++ *opos++ = a; ++ ipos += 2; ++ } ++ return 0; ++} ++ ++static int uuid_str2bin(const char *str, u8 *bin) ++{ ++ const char *pos; ++ u8 *opos; ++ ++ pos = str; ++ opos = bin; ++ ++ if (hexstr2bin(pos, opos, 4)) ++ return -1; ++ pos += 8; ++ opos += 4; ++ ++ if (*pos++ != '-' || hexstr2bin(pos, opos, 2)) ++ return -1; ++ pos += 4; ++ opos += 2; ++ ++ if (*pos++ != '-' || hexstr2bin(pos, opos, 2)) ++ return -1; ++ pos += 4; ++ opos += 2; ++ ++ if (*pos++ != '-' || hexstr2bin(pos, opos, 2)) ++ return -1; ++ pos += 4; ++ opos += 2; ++ ++ if (*pos++ != '-' || hexstr2bin(pos, opos, 6)) ++ return -1; ++ ++ return 0; ++} ++ ++static int rtw_p2p_set_wps_uuid(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo = &(padapter->wdinfo); ++ ++ DBG_871X("[%s] data = %s\n", __FUNCTION__, extra); ++ ++ if ((36 == strlen(extra)) && (uuid_str2bin(extra, pwdinfo->uuid) == 0)) ++ { ++ pwdinfo->external_uuid = 1; ++ } else { ++ pwdinfo->external_uuid = 0; ++ ret = -EINVAL; ++ } ++ ++ return ret; ++ ++} ++#ifdef CONFIG_WFD ++static int rtw_p2p_set_pc(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ u8 peerMAC[ ETH_ALEN ] = { 0x00 }; ++ int jj,kk; ++ u8 peerMACStr[ ETH_ALEN * 2 ] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ u8 attr_content[50] = { 0x00 }, _status = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ _irqL irqL; ++ uint uintPeerChannel = 0; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif // CONFIG_CONCURRENT_MODE ++ struct wifi_display_info* pwfd_info = pwdinfo->wfd_info; ++ ++ // Commented by Albert 20120512 ++ // 1. Input information is the MAC address which wants to know the Preferred Connection bit (PC bit) ++ // Format: 00:E0:4C:00:00:05 ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ ++ for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] ); ++ } ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ // Commented by Albert 2011/05/18 ++ // Match the device address located in the P2P IE ++ // This is for the case that the P2P device address is not the same as the P2P interface address. ++ ++ if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)) ) ++ { ++ // The P2P Device ID attribute is included in the Beacon frame. ++ // The P2P Device Info attribute is included in the probe response frame. ++ printk( "[%s] Got P2P IE\n", __FUNCTION__ ); ++ if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device ID attribute of Beacon first ++ printk( "[%s] P2P_ATTR_DEVICE_ID \n", __FUNCTION__ ); ++ if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device Info attribute of probe response ++ printk( "[%s] P2P_ATTR_DEVICE_INFO \n", __FUNCTION__ ); ++ if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ ++ } ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ printk( "[%s] channel = %d\n", __FUNCTION__, uintPeerChannel ); ++ ++ if ( uintPeerChannel ) ++ { ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ uint wfd_ielen = 0; ++ ++ if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 wfd_devinfo[ 6 ] = { 0x00 }; ++ uint wfd_devlen = 6; ++ ++ DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ ); ++ if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) ) ++ { ++ u16 wfd_devinfo_field = 0; ++ ++ // Commented by Albert 20120319 ++ // The first two bytes are the WFD device information field of WFD device information subelement. ++ // In big endian format. ++ wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo); ++ if ( wfd_devinfo_field & WFD_DEVINFO_PC_TDLS ) ++ { ++ pwfd_info->wfd_pc = _TRUE; ++ } ++ else ++ { ++ pwfd_info->wfd_pc = _FALSE; ++ } ++ } ++ } ++ } ++ else ++ { ++ DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ ); ++ } ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_wfd_device_type(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ struct wifi_display_info *pwfd_info = pwdinfo->wfd_info; ++ ++ // Commented by Albert 20120328 ++ // The input data is 0 or 1 ++ // 0: specify to Miracast source device ++ // 1 or others: specify to Miracast sink device (display device) ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if ( extra[ 0 ] == '0' ) // Set to Miracast source device. ++ { ++ pwfd_info->wfd_device_type = WFD_DEVINFO_SOURCE; ++ } ++ else // Set to Miracast sink device. ++ { ++ pwfd_info->wfd_device_type = WFD_DEVINFO_PSINK; ++ } ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_scan_result_type(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ struct wifi_display_info *pwfd_info = pwdinfo->wfd_info; ++ ++ // Commented by Albert 20120328 ++ // The input data is 0 , 1 , 2 ++ // 0: when the P2P is enabled, the scan result will return all the found P2P device. ++ // 1: when the P2P is enabled, the scan result will return all the found P2P device and AP. ++ // 2: when the P2P is enabled, the scan result will show up the found Miracast devices base on... ++ // It will show up all the Miracast source device if this device is sink. ++ // It will show up all the Miracast sink device if this device is source. ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if ( extra[ 0 ] == '0' ) ++ { ++ pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY; ++ } ++ else if ( extra[ 0 ] == '1' ) ++ { ++ pwfd_info->scan_result_type = SCAN_RESULT_ALL; ++ } ++ else if ( extra[ 0 ] == '2' ) ++ { ++ pwfd_info->scan_result_type = SCAN_RESULT_WFD_TYPE; ++ } ++ else ++ { ++ pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY; ++ } ++ ++exit: ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_wfd_enable(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++// Commented by Kurt 20121206 ++// This function is used to set wfd enabled ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++ if(*extra == '0' ) ++ pwdinfo->wfd_info->wfd_enable = _FALSE; ++ else if(*extra == '1') ++ pwdinfo->wfd_info->wfd_enable = _TRUE; ++ ++ DBG_871X( "[%s] wfd_enable = %d\n", __FUNCTION__, pwdinfo->wfd_info->wfd_enable ); ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_set_driver_iface(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++// Commented by Kurt 20121206 ++// This function is used to set driver iface is WEXT or CFG80211 ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ ++ if(*extra == '1' ) ++ { ++ pwdinfo->driver_interface = DRIVER_WEXT; ++ DBG_871X( "[%s] driver_interface = WEXT\n", __FUNCTION__); ++ } ++ else if(*extra == '2') ++ { ++ pwdinfo->driver_interface = DRIVER_CFG80211; ++ DBG_871X( "[%s] driver_interface = CFG80211\n", __FUNCTION__); ++ } ++ ++ return ret; ++ ++} ++ ++// To set the WFD session available to enable or disable ++static int rtw_p2p_set_sa(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ struct wifi_display_info *pwfd_info = pwdinfo->wfd_info; ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if( 0 ) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ else ++ { ++ if ( extra[ 0 ] == '0' ) // Disable the session available. ++ { ++ pwdinfo->session_available = _FALSE; ++ } ++ else if ( extra[ 0 ] == '1' ) // Enable the session available. ++ { ++ pwdinfo->session_available = _TRUE; ++ } ++ else ++ { ++ pwdinfo->session_available = _FALSE; ++ } ++ } ++ printk( "[%s] session available = %d\n", __FUNCTION__, pwdinfo->session_available ); ++ ++exit: ++ ++ return ret; ++ ++} ++#endif //CONFIG_WFD ++ ++static int rtw_p2p_prov_disc(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ u8 peerMAC[ ETH_ALEN ] = { 0x00 }; ++ int jj,kk; ++ u8 peerMACStr[ ETH_ALEN * 2 ] = { 0x00 }; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _list *plist, *phead; ++ _queue *queue = &(pmlmepriv->scanned_queue); ++ struct wlan_network *pnetwork = NULL; ++ uint uintPeerChannel = 0; ++ u8 attr_content[100] = { 0x00 }, _status = 0; ++ u8 *p2pie; ++ uint p2pielen = 0, attr_contentlen = 0; ++ _irqL irqL; ++ u8 ie_offset; ++#ifdef CONFIG_CONCURRENT_MODE ++ _adapter *pbuddy_adapter = padapter->pbuddy_adapter; ++ struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv; ++#endif // CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_WFD ++ struct wifi_display_info* pwfd_info = pwdinfo->wfd_info; ++#endif // CONFIG_WFD ++ ++ // Commented by Albert 20110301 ++ // The input data contains two informations. ++ // 1. First information is the MAC address which wants to issue the provisioning discovery request frame. ++ // 2. Second information is the WPS configuration method which wants to discovery ++ // Format: 00:E0:4C:00:00:05_display ++ // Format: 00:E0:4C:00:00:05_keypad ++ // Format: 00:E0:4C:00:00:05_pbc ++ // Format: 00:E0:4C:00:00:05_label ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ ++ if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ ); ++ return ret; ++ } ++ else ++ { ++#ifdef CONFIG_INTEL_WIDI ++ if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE){ ++ DBG_871X( "[%s] WiFi is under survey!\n", __FUNCTION__ ); ++ return ret; ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++ // Reset the content of struct tx_provdisc_req_info excluded the wps_config_method_request. ++ _rtw_memset( pwdinfo->tx_prov_disc_info.peerDevAddr, 0x00, ETH_ALEN ); ++ _rtw_memset( pwdinfo->tx_prov_disc_info.peerIFAddr, 0x00, ETH_ALEN ); ++ _rtw_memset( &pwdinfo->tx_prov_disc_info.ssid, 0x00, sizeof( NDIS_802_11_SSID ) ); ++ pwdinfo->tx_prov_disc_info.peer_channel_num[ 0 ] = 0; ++ pwdinfo->tx_prov_disc_info.peer_channel_num[ 1 ] = 0; ++ pwdinfo->tx_prov_disc_info.benable = _FALSE; ++ } ++ ++ for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 ) ++ { ++ peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] ); ++ } ++ ++ if ( _rtw_memcmp( &extra[ 18 ], "display", 7 ) ) ++ { ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_DISPLYA; ++ } ++ else if ( _rtw_memcmp( &extra[ 18 ], "keypad", 7 ) ) ++ { ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_KEYPAD; ++ } ++ else if ( _rtw_memcmp( &extra[ 18 ], "pbc", 3 ) ) ++ { ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON; ++ } ++ else if ( _rtw_memcmp( &extra[ 18 ], "label", 5 ) ) ++ { ++ pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_LABEL; ++ } ++ else ++ { ++ DBG_871X( "[%s] Unknown WPS config methodn", __FUNCTION__ ); ++ return( ret ); ++ } ++ ++ ++ _enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ phead = get_list_head(queue); ++ plist = get_next(phead); ++ ++ while(1) ++ { ++ if (rtw_end_of_queue_search(phead,plist)== _TRUE) ++ break; ++ ++ if( uintPeerChannel != 0 ) ++ break; ++ ++ pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list); ++ ++ // Commented by Albert 2011/05/18 ++ // Match the device address located in the P2P IE ++ // This is for the case that the P2P device address is not the same as the P2P interface address. ++ ++ if (pnetwork->network.Reserved[0] == 2) { // Probe Request ++ ie_offset = 0; ++ } else { // Beacon or Probe Respones ++ ie_offset = 12; ++ } ++ if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[ie_offset], pnetwork->network.IELength - ie_offset, NULL, &p2pielen)) ) ++ { ++ while ( p2pie ) ++ { ++ // The P2P Device ID attribute is included in the Beacon frame. ++ // The P2P Device Info attribute is included in the probe response frame. ++ ++ if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device ID attribute of Beacon first ++ if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) ) ++ { ++ // Handle the P2P Device Info attribute of probe response ++ if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++ ++ //Get the next P2P IE ++ p2pie = rtw_get_p2p_ie(p2pie+p2pielen, pnetwork->network.IELength - ie_offset -(p2pie -&pnetwork->network.IEs[ie_offset] + p2pielen), NULL, &p2pielen); ++ } ++ } ++ ++#ifdef CONFIG_INTEL_WIDI ++ // Some Intel WiDi source may not provide P2P IE, ++ // so we could only compare mac addr by 802.11 Source Address ++ if( pmlmepriv->widi_state == INTEL_WIDI_STATE_WFD_CONNECTION ++ && uintPeerChannel == 0 ) ++ { ++ if ( _rtw_memcmp( pnetwork->network.MacAddress, peerMAC, ETH_ALEN ) ) ++ { ++ uintPeerChannel = pnetwork->network.Configuration.DSConfig; ++ break; ++ } ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++ plist = get_next(plist); ++ ++ } ++ ++ _exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL); ++ ++ if ( uintPeerChannel ) ++ { ++#ifdef CONFIG_WFD ++ { ++ u8 wfd_ie[ 128 ] = { 0x00 }; ++ uint wfd_ielen = 0; ++ ++ if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, wfd_ie, &wfd_ielen ) ) ++ { ++ u8 wfd_devinfo[ 6 ] = { 0x00 }; ++ uint wfd_devlen = 6; ++ ++ DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ ); ++ if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) ) ++ { ++ u16 wfd_devinfo_field = 0; ++ ++ // Commented by Albert 20120319 ++ // The first two bytes are the WFD device information field of WFD device information subelement. ++ // In big endian format. ++ wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo); ++ if ( wfd_devinfo_field & WFD_DEVINFO_SESSION_AVAIL ) ++ { ++ pwfd_info->peer_session_avail = _TRUE; ++ } ++ else ++ { ++ pwfd_info->peer_session_avail = _FALSE; ++ } ++ } ++ } ++ ++ if ( _FALSE == pwfd_info->peer_session_avail ) ++ { ++ DBG_871X( "[%s] WFD Session not avaiable!\n", __FUNCTION__ ); ++ goto exit; ++ } ++ } ++#endif // CONFIG_WFD ++ ++ DBG_871X( "[%s] peer channel: %d!\n", __FUNCTION__, uintPeerChannel ); ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer ); ++ } ++#endif // CONFIG_CONCURRENT_MODE ++ _rtw_memcpy( pwdinfo->tx_prov_disc_info.peerIFAddr, pnetwork->network.MacAddress, ETH_ALEN ); ++ _rtw_memcpy( pwdinfo->tx_prov_disc_info.peerDevAddr, peerMAC, ETH_ALEN ); ++ pwdinfo->tx_prov_disc_info.peer_channel_num[0] = ( u16 ) uintPeerChannel; ++ pwdinfo->tx_prov_disc_info.benable = _TRUE; ++ rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo)); ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ); ++ ++ if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT)) ++ { ++ _rtw_memcpy( &pwdinfo->tx_prov_disc_info.ssid, &pnetwork->network.Ssid, sizeof( NDIS_802_11_SSID ) ); ++ } ++ else if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)) ++ { ++ _rtw_memcpy( pwdinfo->tx_prov_disc_info.ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN ); ++ pwdinfo->tx_prov_disc_info.ssid.SsidLength= P2P_WILDCARD_SSID_LEN; ++ } ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ // Have to enter the power saving with the AP ++ set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode); ++ ++ issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500); ++ } ++ else ++ { ++ set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++ } ++#else ++ set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20); ++#endif ++ ++ _set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT ); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if ( check_buddy_fwstate(padapter, _FW_LINKED ) ) ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_PROVISION_TIMEOUT ); ++ } ++ else ++ { ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT ); ++ } ++#else ++ _set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT ); ++#endif // CONFIG_CONCURRENT_MODE ++ ++ ++ } ++ else ++ { ++ DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ ); ++#ifdef CONFIG_INTEL_WIDI ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH); ++ rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE); ++ rtw_free_network_queue(padapter, _TRUE); ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ rtw_sitesurvey_cmd(padapter, NULL, 0, NULL, 0); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++#endif //CONFIG_INTEL_WIDI ++ } ++exit: ++ ++ return ret; ++ ++} ++ ++// Added by Albert 20110328 ++// This function is used to inform the driver the user had specified the pin code value or pbc ++// to application. ++ ++static int rtw_p2p_got_wpsinfo(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct wifidirect_info *pwdinfo = &( padapter->wdinfo ); ++ ++ ++ DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra ); ++ // Added by Albert 20110328 ++ // if the input data is P2P_NO_WPSINFO -> reset the wpsinfo ++ // if the input data is P2P_GOT_WPSINFO_PEER_DISPLAY_PIN -> the utility just input the PIN code got from the peer P2P device. ++ // if the input data is P2P_GOT_WPSINFO_SELF_DISPLAY_PIN -> the utility just got the PIN code from itself. ++ // if the input data is P2P_GOT_WPSINFO_PBC -> the utility just determine to use the PBC ++ ++ if ( *extra == '0' ) ++ { ++ pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO; ++ } ++ else if ( *extra == '1' ) ++ { ++ pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_PEER_DISPLAY_PIN; ++ } ++ else if ( *extra == '2' ) ++ { ++ pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_SELF_DISPLAY_PIN; ++ } ++ else if ( *extra == '3' ) ++ { ++ pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_PBC; ++ } ++ else ++ { ++ pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO; ++ } ++ ++ return ret; ++ ++} ++ ++#endif //CONFIG_P2P ++ ++static int rtw_p2p_set(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++#ifdef CONFIG_P2P ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ DBG_871X( "[%s] extra = %s\n", __FUNCTION__, extra ); ++ ++ if ( _rtw_memcmp( extra, "enable=", 7 ) ) ++ { ++ rtw_wext_p2p_enable( dev, info, wrqu, &extra[7] ); ++ } ++ else if ( _rtw_memcmp( extra, "setDN=", 6 ) ) ++ { ++ wrqu->data.length -= 6; ++ rtw_p2p_setDN( dev, info, wrqu, &extra[6] ); ++ } ++ else if ( _rtw_memcmp( extra, "profilefound=", 13 ) ) ++ { ++ wrqu->data.length -= 13; ++ rtw_p2p_profilefound( dev, info, wrqu, &extra[13] ); ++ } ++ else if ( _rtw_memcmp( extra, "prov_disc=", 10 ) ) ++ { ++ wrqu->data.length -= 10; ++ rtw_p2p_prov_disc( dev, info, wrqu, &extra[10] ); ++ } ++ else if ( _rtw_memcmp( extra, "nego=", 5 ) ) ++ { ++ wrqu->data.length -= 5; ++ rtw_p2p_connect( dev, info, wrqu, &extra[5] ); ++ } ++ else if ( _rtw_memcmp( extra, "intent=", 7 ) ) ++ { ++ // Commented by Albert 2011/03/23 ++ // The wrqu->data.length will include the null character ++ // So, we will decrease 7 + 1 ++ wrqu->data.length -= 8; ++ rtw_p2p_set_intent( dev, info, wrqu, &extra[7] ); ++ } ++ else if ( _rtw_memcmp( extra, "ssid=", 5 ) ) ++ { ++ wrqu->data.length -= 5; ++ rtw_p2p_set_go_nego_ssid( dev, info, wrqu, &extra[5] ); ++ } ++ else if ( _rtw_memcmp( extra, "got_wpsinfo=", 12 ) ) ++ { ++ wrqu->data.length -= 12; ++ rtw_p2p_got_wpsinfo( dev, info, wrqu, &extra[12] ); ++ } ++ else if ( _rtw_memcmp( extra, "listen_ch=", 10 ) ) ++ { ++ // Commented by Albert 2011/05/24 ++ // The wrqu->data.length will include the null character ++ // So, we will decrease (10 + 1) ++ wrqu->data.length -= 11; ++ rtw_p2p_set_listen_ch( dev, info, wrqu, &extra[10] ); ++ } ++ else if ( _rtw_memcmp( extra, "op_ch=", 6 ) ) ++ { ++ // Commented by Albert 2011/05/24 ++ // The wrqu->data.length will include the null character ++ // So, we will decrease (6 + 1) ++ wrqu->data.length -= 7; ++ rtw_p2p_set_op_ch( dev, info, wrqu, &extra[6] ); ++ } ++ else if ( _rtw_memcmp( extra, "invite=", 7 ) ) ++ { ++ wrqu->data.length -= 8; ++ rtw_p2p_invite_req( dev, info, wrqu, &extra[7] ); ++ } ++ else if ( _rtw_memcmp( extra, "persistent=", 11 ) ) ++ { ++ wrqu->data.length -= 11; ++ rtw_p2p_set_persistent( dev, info, wrqu, &extra[11] ); ++ } ++ else if ( _rtw_memcmp ( extra, "uuid=", 5) ) ++ { ++ wrqu->data.length -= 5; ++ ret = rtw_p2p_set_wps_uuid( dev, info, wrqu, &extra[5] ); ++ } ++#ifdef CONFIG_WFD ++ else if ( _rtw_memcmp( extra, "sa=", 3 ) ) ++ { ++ // sa: WFD Session Available information ++ wrqu->data.length -= 3; ++ rtw_p2p_set_sa( dev, info, wrqu, &extra[3] ); ++ } ++ else if ( _rtw_memcmp( extra, "pc=", 3 ) ) ++ { ++ // pc: WFD Preferred Connection ++ wrqu->data.length -= 3; ++ rtw_p2p_set_pc( dev, info, wrqu, &extra[3] ); ++ } ++ else if ( _rtw_memcmp( extra, "wfd_type=", 9 ) ) ++ { ++ // Specify this device is Mircast source or sink ++ wrqu->data.length -= 9; ++ rtw_p2p_set_wfd_device_type( dev, info, wrqu, &extra[9] ); ++ } ++ else if ( _rtw_memcmp( extra, "scan_type=", 10 ) ) ++ { ++ wrqu->data.length -= 10; ++ rtw_p2p_set_scan_result_type( dev, info, wrqu, &extra[10] ); ++ } ++ else if ( _rtw_memcmp( extra, "wfd_enable=", 11 ) ) ++ { ++ wrqu->data.length -= 11; ++ rtw_p2p_set_wfd_enable( dev, info, wrqu, &extra[11] ); ++ } ++ else if ( _rtw_memcmp( extra, "driver_iface=", 13 ) ) ++ { ++ wrqu->data.length -= 13; ++ rtw_p2p_set_driver_iface( dev, info, wrqu, &extra[13] ); ++ } ++#endif //CONFIG_WFD ++#endif //CONFIG_P2P ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_get(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ ++#ifdef CONFIG_P2P ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct iw_point *pdata = &wrqu->data; ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ if ( padapter->bShowGetP2PState ) ++ { ++ DBG_871X( "[%s] extra = %s\n", __FUNCTION__, (char*) wrqu->data.pointer ); ++ } ++ ++ if ( _rtw_memcmp( wrqu->data.pointer, "status", 6 ) ) ++ { ++ rtw_p2p_get_status( dev, info, wrqu, extra ); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "role", 4 ) ) ++ { ++ rtw_p2p_get_role( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "peer_ifa", 8 ) ) ++ { ++ rtw_p2p_get_peer_ifaddr( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "req_cm", 6 ) ) ++ { ++ rtw_p2p_get_req_cm( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "peer_deva", 9 ) ) ++ { ++ // Get the P2P device address when receiving the provision discovery request frame. ++ rtw_p2p_get_peer_devaddr( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "group_id", 8 ) ) ++ { ++ rtw_p2p_get_groupid( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "inv_peer_deva", 13 ) ) ++ { ++ // Get the P2P device address when receiving the P2P Invitation request frame. ++ rtw_p2p_get_peer_devaddr_by_invitation( dev, info, wrqu, extra); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "op_ch", 5 ) ) ++ { ++ rtw_p2p_get_op_ch( dev, info, wrqu, extra); ++ } ++#ifdef CONFIG_WFD ++ else if ( _rtw_memcmp( wrqu->data.pointer, "peer_port", 9 ) ) ++ { ++ rtw_p2p_get_peer_wfd_port( dev, info, wrqu, extra ); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "wfd_sa", 6 ) ) ++ { ++ rtw_p2p_get_peer_wfd_session_available( dev, info, wrqu, extra ); ++ } ++ else if ( _rtw_memcmp( wrqu->data.pointer, "wfd_pc", 6 ) ) ++ { ++ rtw_p2p_get_peer_wfd_preferred_connection( dev, info, wrqu, extra ); ++ } ++#endif // CONFIG_WFD ++ ++#endif //CONFIG_P2P ++ ++ return ret; ++ ++} ++ ++static int rtw_p2p_get2(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ ++#ifdef CONFIG_P2P ++ ++ int length = wrqu->data.length; ++ char *buffer = (u8 *)rtw_malloc(length); ++ ++ if (buffer == NULL) ++ { ++ ret = -ENOMEM; ++ goto bad; ++ } ++ ++ if (copy_from_user(buffer, wrqu->data.pointer, wrqu->data.length)) ++ { ++ ret - EFAULT; ++ goto bad; ++ } ++ ++ DBG_871X("[%s] buffer = %s\n", __FUNCTION__, buffer); ++ ++ if (_rtw_memcmp(buffer, "wpsCM=", 6)) ++ { ++ ret = rtw_p2p_get_wps_configmethod(dev, info, wrqu, extra, &buffer[6]); ++ } else if (_rtw_memcmp(buffer, "devN=", 5)) ++ { ++ ret = rtw_p2p_get_device_name(dev, info, wrqu, extra, &buffer[5]); ++ } else if (_rtw_memcmp(buffer, "dev_type=", 9)) ++ { ++ ret = rtw_p2p_get_device_type(dev, info, wrqu, extra, &buffer[9]); ++ } else if (_rtw_memcmp(buffer, "go_devadd=", 10)) ++ { ++ ret = rtw_p2p_get_go_device_address(dev, info, wrqu, extra, &buffer[10]); ++ } else if (_rtw_memcmp(buffer, "InvProc=", 8)) ++ { ++ ret = rtw_p2p_get_invitation_procedure(dev, info, wrqu, extra, &buffer[8]); ++ } else ++ { ++ snprintf(extra, sizeof("Command not found."), "Command not found."); ++ wrqu->data.length = strlen(extra); ++ } ++ ++bad: ++ if (buffer) ++ { ++ rtw_mfree(buffer, length); ++ } ++ ++#endif //CONFIG_P2P ++ ++ return ret; ++ ++} ++ ++extern int rtw_change_ifname(_adapter *padapter, const char *ifname); ++static int rtw_rereg_nd_name(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ _adapter *padapter = rtw_netdev_priv(dev); ++ struct rereg_nd_name_data *rereg_priv = &padapter->rereg_nd_name_priv; ++ char new_ifname[IFNAMSIZ]; ++ ++ if(rereg_priv->old_ifname[0] == 0) { ++ char *reg_ifname; ++#ifdef CONFIG_CONCURRENT_MODE ++ if (padapter->isprimary) ++ reg_ifname = padapter->registrypriv.ifname; ++ else ++#endif ++ reg_ifname = padapter->registrypriv.if2name; ++ ++ strncpy(rereg_priv->old_ifname, reg_ifname, IFNAMSIZ); ++ rereg_priv->old_ifname[IFNAMSIZ-1] = 0; ++ } ++ ++ //DBG_871X("%s wrqu->data.length:%d\n", __FUNCTION__, wrqu->data.length); ++ if(wrqu->data.length > IFNAMSIZ) ++ return -EFAULT; ++ ++ if ( copy_from_user(new_ifname, wrqu->data.pointer, IFNAMSIZ) ) { ++ return -EFAULT; ++ } ++ ++ if( 0 == strcmp(rereg_priv->old_ifname, new_ifname) ) { ++ return ret; ++ } ++ ++ DBG_871X("%s new_ifname:%s\n", __FUNCTION__, new_ifname); ++ if( 0 != (ret = rtw_change_ifname(padapter, new_ifname)) ) { ++ goto exit; ++ } ++ ++ if(_rtw_memcmp(rereg_priv->old_ifname, "disable%d", 9) == _TRUE) { ++ padapter->ledpriv.bRegUseLed= rereg_priv->old_bRegUseLed; ++ rtw_hal_sw_led_init(padapter); ++ rtw_ips_mode_req(&padapter->pwrctrlpriv, rereg_priv->old_ips_mode); ++ } ++ ++ strncpy(rereg_priv->old_ifname, new_ifname, IFNAMSIZ); ++ rereg_priv->old_ifname[IFNAMSIZ-1] = 0; ++ ++ if(_rtw_memcmp(new_ifname, "disable%d", 9) == _TRUE) { ++ ++ DBG_871X("%s disable\n", __FUNCTION__); ++ // free network queue for Android's timming issue ++ rtw_free_network_queue(padapter, _TRUE); ++ ++ // close led ++ rtw_led_control(padapter, LED_CTL_POWER_OFF); ++ rereg_priv->old_bRegUseLed = padapter->ledpriv.bRegUseLed; ++ padapter->ledpriv.bRegUseLed= _FALSE; ++ rtw_hal_sw_led_deinit(padapter); ++ ++ // the interface is being "disabled", we can do deeper IPS ++ rereg_priv->old_ips_mode = rtw_get_ips_mode_req(&padapter->pwrctrlpriv); ++ rtw_ips_mode_req(&padapter->pwrctrlpriv, IPS_NORMAL); ++ } ++exit: ++ return ret; ++ ++} ++ ++#if 0 ++void mac_reg_dump(_adapter *padapter) ++{ ++ int i,j=1; ++ DBG_871X("\n======= MAC REG =======\n"); ++ for(i=0x0;i<0x300;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++ for(i=0x400;i<0x800;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++} ++void bb_reg_dump(_adapter *padapter) ++{ ++ int i,j=1; ++ DBG_871X("\n======= BB REG =======\n"); ++ for(i=0x800;i<0x1000;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++} ++void rf_reg_dump(_adapter *padapter) ++{ ++ int i,j=1,path; ++ u32 value; ++ DBG_871X("\n======= RF REG =======\n"); ++ for(path=0;path<2;path++) ++ { ++ DBG_871X("\nRF_Path(%x)\n",path); ++ for(i=0;i<0x100;i++) ++ { ++ value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord); ++ if(j%4==1) DBG_871X("0x%02x ",i); ++ DBG_871X(" 0x%08x ",value); ++ if((j++)%4==0) DBG_871X("\n"); ++ } ++ } ++} ++ ++#endif ++ ++void mac_reg_dump(_adapter *padapter) ++{ ++ int i,j=1; ++ DBG_871X("\n======= MAC REG =======\n"); ++ for(i=0x0;i<0x300;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++ for(i=0x400;i<0x800;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++} ++void bb_reg_dump(_adapter *padapter) ++{ ++ int i,j=1; ++ DBG_871X("\n======= BB REG =======\n"); ++ for(i=0x800;i<0x1000;i+=4) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++} ++void rf_reg_dump(_adapter *padapter) ++{ ++ int i,j=1,path; ++ u32 value; ++ u8 rf_type,path_nums = 0; ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ DBG_871X("\n======= RF REG =======\n"); ++ if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type )) ++ path_nums = 1; ++ else ++ path_nums = 2; ++ ++ for(path=0;path ++#endif ++#ifdef DBG_CONFIG_ERROR_DETECT ++#include ++#endif ++static int rtw_dbg_port(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ _irqL irqL; ++ int ret = 0; ++ u8 major_cmd, minor_cmd; ++ u16 arg; ++ u32 extra_arg, *pdata, val32; ++ struct sta_info *psta; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ struct wlan_network *cur_network = &(pmlmepriv->cur_network); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ ++ pdata = (u32*)&wrqu->data; ++ ++ val32 = *pdata; ++ arg = (u16)(val32&0x0000ffff); ++ major_cmd = (u8)(val32>>24); ++ minor_cmd = (u8)((val32>>16)&0x00ff); ++ ++ extra_arg = *(pdata+1); ++ ++ switch(major_cmd) ++ { ++ case 0x70://read_reg ++ switch(minor_cmd) ++ { ++ case 1: ++ DBG_871X("rtw_read8(0x%x)=0x%02x\n", arg, rtw_read8(padapter, arg)); ++ break; ++ case 2: ++ DBG_871X("rtw_read16(0x%x)=0x%04x\n", arg, rtw_read16(padapter, arg)); ++ break; ++ case 4: ++ DBG_871X("rtw_read32(0x%x)=0x%08x\n", arg, rtw_read32(padapter, arg)); ++ break; ++ } ++ break; ++ case 0x71://write_reg ++ switch(minor_cmd) ++ { ++ case 1: ++ rtw_write8(padapter, arg, extra_arg); ++ DBG_871X("rtw_write8(0x%x)=0x%02x\n", arg, rtw_read8(padapter, arg)); ++ break; ++ case 2: ++ rtw_write16(padapter, arg, extra_arg); ++ DBG_871X("rtw_write16(0x%x)=0x%04x\n", arg, rtw_read16(padapter, arg)); ++ break; ++ case 4: ++ rtw_write32(padapter, arg, extra_arg); ++ DBG_871X("rtw_write32(0x%x)=0x%08x\n", arg, rtw_read32(padapter, arg)); ++ break; ++ } ++ break; ++ case 0x72://read_bb ++ DBG_871X("read_bbreg(0x%x)=0x%x\n", arg, rtw_hal_read_bbreg(padapter, arg, 0xffffffff)); ++ break; ++ case 0x73://write_bb ++ rtw_hal_write_bbreg(padapter, arg, 0xffffffff, extra_arg); ++ DBG_871X("write_bbreg(0x%x)=0x%x\n", arg, rtw_hal_read_bbreg(padapter, arg, 0xffffffff)); ++ break; ++ case 0x74://read_rf ++ DBG_871X("read RF_reg path(0x%02x),offset(0x%x),value(0x%08x)\n",minor_cmd,arg,rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff)); ++ break; ++ case 0x75://write_rf ++ rtw_hal_write_rfreg(padapter, minor_cmd, arg, 0xffffffff, extra_arg); ++ DBG_871X("write RF_reg path(0x%02x),offset(0x%x),value(0x%08x)\n",minor_cmd,arg, rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff)); ++ break; ++ ++ case 0x76: ++ switch(minor_cmd) ++ { ++ case 0x00: //normal mode, ++ padapter->recvpriv.is_signal_dbg = 0; ++ break; ++ case 0x01: //dbg mode ++ padapter->recvpriv.is_signal_dbg = 1; ++ extra_arg = extra_arg>100?100:extra_arg; ++ extra_arg = extra_arg<0?0:extra_arg; ++ padapter->recvpriv.signal_strength_dbg=extra_arg; ++ break; ++ } ++ break; ++ case 0x78: //IOL test ++ switch(minor_cmd) ++ { ++ #ifdef CONFIG_IOL ++ case 0x04: //LLT table initialization test ++ { ++ u8 page_boundary = 0xf9; ++ { ++ struct xmit_frame *xmit_frame; ++ ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) { ++ ret = -ENOMEM; ++ break; ++ } ++ ++ rtw_IOL_append_LLT_cmd(xmit_frame, page_boundary); ++ ++ ++ if(_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 500) ) ++ ret = -EPERM; ++ } ++ } ++ break; ++ case 0x05: //blink LED test ++ { ++ u16 reg = 0x4c; ++ u32 blink_num = 50; ++ u32 blink_delay_ms = 200; ++ int i; ++ ++ { ++ struct xmit_frame *xmit_frame; ++ ++ if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) { ++ ret = -ENOMEM; ++ break; ++ } ++ ++ for(i=0;inetwork.MacAddress ++ , WLAN_REASON_EXPIRATION_CHK); ++ break; ++ ++ case 0x7F: ++ switch(minor_cmd) ++ { ++ case 0x0: ++ DBG_871X("fwstate=0x%x\n", get_fwstate(pmlmepriv)); ++ break; ++ case 0x01: ++ DBG_871X("auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", ++ psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm, ++ psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus); ++ break; ++ case 0x02: ++ DBG_871X("pmlmeinfo->state=0x%x\n", pmlmeinfo->state); ++ break; ++ case 0x03: ++ DBG_871X("qos_option=%d\n", pmlmepriv->qospriv.qos_option); ++ DBG_871X("ht_option=%d\n", pmlmepriv->htpriv.ht_option); ++ break; ++ case 0x04: ++ DBG_871X("cur_ch=%d\n", pmlmeext->cur_channel); ++ DBG_871X("cur_bw=%d\n", pmlmeext->cur_bwmode); ++ DBG_871X("cur_ch_off=%d\n", pmlmeext->cur_ch_offset); ++ break; ++ case 0x05: ++ psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress); ++ if(psta) ++ { ++ int i; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ ++ DBG_871X("SSID=%s\n", cur_network->network.Ssid.Ssid); ++ DBG_871X("sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr)); ++ DBG_871X("cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset); ++ DBG_871X("rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self); ++ DBG_871X("qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate); ++ DBG_871X("state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid); ++ DBG_871X("bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi); ++ DBG_871X("ampdu_enable = %d\n", psta->htpriv.ampdu_enable); ++ DBG_871X("agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap); ++ ++ for(i=0;i<16;i++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[i]; ++ if(preorder_ctrl->enable) ++ { ++ DBG_871X("tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq); ++ } ++ } ++ ++ } ++ else ++ { ++ DBG_871X("can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress)); ++ } ++ break; ++ case 0x06: ++ { ++ u8 DMFlag; ++ rtw_hal_get_hwreg(padapter, HW_VAR_DM_FLAG, (u8 *)(&DMFlag)); ++ DBG_871X("(B)DMFlag=0x%x, arg=0x%x\n", DMFlag, arg); ++ DMFlag = (u8)(0x0f&arg); ++ DBG_871X("(A)DMFlag=0x%x\n", DMFlag); ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_FLAG, (u8 *)(&DMFlag)); ++ } ++ break; ++ case 0x07: ++ DBG_871X("bSurpriseRemoved=%d, bDriverStopped=%d\n", ++ padapter->bSurpriseRemoved, padapter->bDriverStopped); ++ break; ++ case 0x08: ++ { ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++ DBG_871X("free_xmitbuf_cnt=%d, free_xmitframe_cnt=%d" ++ ", free_xmit_extbuf_cnt=%d, free_xframe_ext_cnt=%d" ++ ", free_recvframe_cnt=%d\n", ++ pxmitpriv->free_xmitbuf_cnt, pxmitpriv->free_xmitframe_cnt, ++ pxmitpriv->free_xmit_extbuf_cnt, pxmitpriv->free_xframe_ext_cnt, ++ precvpriv->free_recvframe_cnt); ++ #ifdef CONFIG_USB_HCI ++ DBG_871X("rx_urb_pending_cn=%d\n", precvpriv->rx_pending_cnt); ++ #endif ++ } ++ break; ++ case 0x09: ++ { ++ int i, j; ++ _list *plist, *phead; ++ struct recv_reorder_ctrl *preorder_ctrl; ++ ++#ifdef CONFIG_AP_MODE ++ DBG_871X("sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap); ++#endif ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(i=0; i< NUM_STA; i++) ++ { ++ phead = &(pstapriv->sta_hash[i]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info, hash_list); ++ ++ plist = get_next(plist); ++ ++ if(extra_arg == psta->aid) ++ { ++ DBG_871X("sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr)); ++ DBG_871X("rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self); ++ DBG_871X("qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate); ++ DBG_871X("state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid); ++ DBG_871X("bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi); ++ DBG_871X("ampdu_enable = %d\n", psta->htpriv.ampdu_enable); ++ DBG_871X("agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap); ++#ifdef CONFIG_AP_MODE ++ DBG_871X("capability=0x%x\n", psta->capability); ++ DBG_871X("flags=0x%x\n", psta->flags); ++ DBG_871X("wpa_psk=0x%x\n", psta->wpa_psk); ++ DBG_871X("wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher); ++ DBG_871X("wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher); ++ DBG_871X("qos_info=0x%x\n", psta->qos_info); ++#endif ++ DBG_871X("dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy); ++ ++ ++ ++ for(j=0;j<16;j++) ++ { ++ preorder_ctrl = &psta->recvreorder_ctrl[j]; ++ if(preorder_ctrl->enable) ++ { ++ DBG_871X("tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq); ++ } ++ } ++ ++ } ++ ++ } ++ } ++ ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ } ++ break; ++ ++ case 0x0c://dump rx packet ++ { ++ DBG_871X("dump rx packet (%d)\n",extra_arg); ++ //pHalData->bDumpRxPkt =extra_arg; ++ rtw_hal_set_def_var(padapter, HAL_DEF_DBG_DUMP_RXPKT, &(extra_arg)); ++ } ++ break; ++#if 0 ++ case 0x0d://dump cam ++ { ++ //u8 entry = (u8) extra_arg; ++ u8 entry=0; ++ //dump cam ++ for(entry=0;entry<32;entry++) ++ read_cam(padapter,entry); ++ } ++ break; ++#endif ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ case 0x0f: ++ { ++ if(extra_arg == 0){ ++ DBG_871X("###### silent reset test.......#####\n"); ++ rtw_hal_sreset_reset(padapter); ++ } else { ++ sreset_set_trigger_point(padapter, extra_arg); ++ } ++ ++ } ++ break; ++ case 0x15: ++ { ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ DBG_871X("==>silent resete cnts:%d\n",pwrpriv->ips_enter_cnts); ++ } ++ break; ++ ++ #endif ++ ++ case 0x10:// driver version display ++ DBG_871X("rtw driver version=%s\n", DRIVERVERSION); ++ break; ++ case 0x11: ++ { ++ DBG_871X("turn %s Rx RSSI display function\n",(extra_arg==1)?"on":"off"); ++ padapter->bRxRSSIDisplay = extra_arg ; ++ } ++ break; ++ case 0x12: //set rx_stbc ++ { ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ // 0: disable, bit(0):enable 2.4g, bit(1):enable 5g, 0x3: enable both 2.4g and 5g ++ //default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ ++ if( pregpriv && (extra_arg == 0 || extra_arg == 1|| extra_arg == 2 || extra_arg == 3)) ++ { ++ pregpriv->rx_stbc= extra_arg; ++ DBG_871X("set rx_stbc=%d\n",pregpriv->rx_stbc); ++ } ++ else ++ DBG_871X("get rx_stbc=%d\n",pregpriv->rx_stbc); ++ ++ } ++ break; ++ case 0x13: //set ampdu_enable ++ { ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ // 0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec) ++ if( pregpriv && extra_arg >= 0 && extra_arg < 3 ) ++ { ++ pregpriv->ampdu_enable= extra_arg; ++ DBG_871X("set ampdu_enable=%d\n",pregpriv->ampdu_enable); ++ } ++ else ++ DBG_871X("get ampdu_enable=%d\n",pregpriv->ampdu_enable); ++ ++ } ++ break; ++ case 0x14: //get wifi_spec ++ { ++ struct registry_priv *pregpriv = &padapter->registrypriv; ++ DBG_871X("get wifi_spec=%d\n",pregpriv->wifi_spec); ++ ++ } ++ break; ++ case 0x22: ++ { ++ DBG_871X("turn %s the ForceWriteInitGain Variable\n",(extra_arg==1)?"on":"off"); ++ padapter->bForceWriteInitGain = extra_arg; ++ break; ++ } ++ case 0x23: ++ { ++ DBG_871X("turn %s the bNotifyChannelChange Variable\n",(extra_arg==1)?"on":"off"); ++ padapter->bNotifyChannelChange = extra_arg; ++ break; ++ } ++ case 0x24: ++ { ++#ifdef CONFIG_P2P ++ DBG_871X("turn %s the bShowGetP2PState Variable\n",(extra_arg==1)?"on":"off"); ++ padapter->bShowGetP2PState = extra_arg; ++#endif // CONFIG_P2P ++ break; ++ } ++#if 1 ++ case 0xdd://registers dump , 0 for mac reg,1 for bb reg, 2 for rf reg ++ { ++ if(extra_arg==0){ ++ mac_reg_dump(padapter); ++ } ++ else if(extra_arg==1){ ++ bb_reg_dump(padapter); ++ } ++ else if(extra_arg==2){ ++ rf_reg_dump(padapter); ++ } ++ ++ } ++ break; ++#endif ++ case 0xee://turn on/off dynamic funcs ++ { ++ u8 dm_flag; ++ ++ if(0xf==extra_arg){ ++ rtw_hal_get_def_var(padapter, HAL_DEF_DBG_DM_FUNC,&dm_flag); ++ DBG_871X(" === DMFlag(0x%02x) === \n",dm_flag); ++ DBG_871X("extra_arg = 0 - disable all dynamic func \n"); ++ DBG_871X("extra_arg = 1 - disable DIG- BIT(0)\n"); ++ DBG_871X("extra_arg = 2 - disable High power - BIT(1)\n"); ++ DBG_871X("extra_arg = 3 - disable tx power tracking - BIT(2)\n"); ++ DBG_871X("extra_arg = 4 - disable BT coexistence - BIT(3)\n"); ++ DBG_871X("extra_arg = 5 - disable antenna diversity - BIT(4)\n"); ++ DBG_871X("extra_arg = 6 - enable all dynamic func \n"); ++ } ++ else{ ++ /* extra_arg = 0 - disable all dynamic func ++ extra_arg = 1 - disable DIG ++ extra_arg = 2 - disable tx power tracking ++ extra_arg = 3 - turn on all dynamic func ++ */ ++ rtw_hal_set_def_var(padapter, HAL_DEF_DBG_DM_FUNC, &(extra_arg)); ++ rtw_hal_get_def_var(padapter, HAL_DEF_DBG_DM_FUNC,&dm_flag); ++ DBG_871X(" === DMFlag(0x%02x) === \n",dm_flag); ++ } ++ } ++ break; ++ ++ case 0xfd: ++ rtw_write8(padapter, 0xc50, arg); ++ DBG_871X("wr(0xc50)=0x%x\n", rtw_read8(padapter, 0xc50)); ++ rtw_write8(padapter, 0xc58, arg); ++ DBG_871X("wr(0xc58)=0x%x\n", rtw_read8(padapter, 0xc58)); ++ break; ++ case 0xfe: ++ DBG_871X("rd(0xc50)=0x%x\n", rtw_read8(padapter, 0xc50)); ++ DBG_871X("rd(0xc58)=0x%x\n", rtw_read8(padapter, 0xc58)); ++ break; ++ case 0xff: ++ { ++ DBG_871X("dbg(0x210)=0x%x\n", rtw_read32(padapter, 0x210)); ++ DBG_871X("dbg(0x608)=0x%x\n", rtw_read32(padapter, 0x608)); ++ DBG_871X("dbg(0x280)=0x%x\n", rtw_read32(padapter, 0x280)); ++ DBG_871X("dbg(0x284)=0x%x\n", rtw_read32(padapter, 0x284)); ++ DBG_871X("dbg(0x288)=0x%x\n", rtw_read32(padapter, 0x288)); ++ ++ DBG_871X("dbg(0x664)=0x%x\n", rtw_read32(padapter, 0x664)); ++ ++ ++ DBG_871X("\n"); ++ ++ DBG_871X("dbg(0x430)=0x%x\n", rtw_read32(padapter, 0x430)); ++ DBG_871X("dbg(0x438)=0x%x\n", rtw_read32(padapter, 0x438)); ++ ++ DBG_871X("dbg(0x440)=0x%x\n", rtw_read32(padapter, 0x440)); ++ ++ DBG_871X("dbg(0x458)=0x%x\n", rtw_read32(padapter, 0x458)); ++ ++ DBG_871X("dbg(0x484)=0x%x\n", rtw_read32(padapter, 0x484)); ++ DBG_871X("dbg(0x488)=0x%x\n", rtw_read32(padapter, 0x488)); ++ ++ DBG_871X("dbg(0x444)=0x%x\n", rtw_read32(padapter, 0x444)); ++ DBG_871X("dbg(0x448)=0x%x\n", rtw_read32(padapter, 0x448)); ++ DBG_871X("dbg(0x44c)=0x%x\n", rtw_read32(padapter, 0x44c)); ++ DBG_871X("dbg(0x450)=0x%x\n", rtw_read32(padapter, 0x450)); ++ } ++ break; ++ } ++ break; ++ default: ++ DBG_871X("error dbg cmd!\n"); ++ break; ++ } ++ ++ ++ return ret; ++ ++} ++ ++static int wpa_set_param(struct net_device *dev, u8 name, u32 value) ++{ ++ uint ret=0; ++ u32 flags; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ switch (name){ ++ case IEEE_PARAM_WPA_ENABLED: ++ ++ padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; //802.1x ++ ++ //ret = ieee80211_wpa_enable(ieee, value); ++ ++ switch((value)&0xff) ++ { ++ case 1 : //WPA ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeWPAPSK; //WPA_PSK ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled; ++ break; ++ case 2: //WPA2 ++ padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeWPA2PSK; //WPA2_PSK ++ padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled; ++ break; ++ } ++ ++ RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("wpa_set_param:padapter->securitypriv.ndisauthtype=%d\n", padapter->securitypriv.ndisauthtype)); ++ ++ break; ++ ++ case IEEE_PARAM_TKIP_COUNTERMEASURES: ++ //ieee->tkip_countermeasures=value; ++ break; ++ ++ case IEEE_PARAM_DROP_UNENCRYPTED: ++ { ++ /* HACK: ++ * ++ * wpa_supplicant calls set_wpa_enabled when the driver ++ * is loaded and unloaded, regardless of if WPA is being ++ * used. No other calls are made which can be used to ++ * determine if encryption will be used or not prior to ++ * association being expected. If encryption is not being ++ * used, drop_unencrypted is set to false, else true -- we ++ * can use this to determine if the CAP_PRIVACY_ON bit should ++ * be set. ++ */ ++ ++#if 0 ++ struct ieee80211_security sec = { ++ .flags = SEC_ENABLED, ++ .enabled = value, ++ }; ++ ieee->drop_unencrypted = value; ++ /* We only change SEC_LEVEL for open mode. Others ++ * are set by ipw_wpa_set_encryption. ++ */ ++ if (!value) { ++ sec.flags |= SEC_LEVEL; ++ sec.level = SEC_LEVEL_0; ++ } ++ else { ++ sec.flags |= SEC_LEVEL; ++ sec.level = SEC_LEVEL_1; ++ } ++ if (ieee->set_security) ++ ieee->set_security(ieee->dev, &sec); ++#endif ++ break; ++ ++ } ++ case IEEE_PARAM_PRIVACY_INVOKED: ++ ++ //ieee->privacy_invoked=value; ++ ++ break; ++ ++ case IEEE_PARAM_AUTH_ALGS: ++ ++ ret = wpa_set_auth_algs(dev, value); ++ ++ break; ++ ++ case IEEE_PARAM_IEEE_802_1X: ++ ++ //ieee->ieee802_1x=value; ++ ++ break; ++ ++ case IEEE_PARAM_WPAX_SELECT: ++ ++ // added for WPA2 mixed mode ++ //DBG_871X(KERN_WARNING "------------------------>wpax value = %x\n", value); ++ /* ++ spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags); ++ ieee->wpax_type_set = 1; ++ ieee->wpax_type_notify = value; ++ spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags); ++ */ ++ ++ break; ++ ++ default: ++ ++ ++ ++ ret = -EOPNOTSUPP; ++ ++ ++ break; ++ ++ } ++ ++ return ret; ++ ++} ++ ++static int wpa_mlme(struct net_device *dev, u32 command, u32 reason) ++{ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ switch (command) ++ { ++ case IEEE_MLME_STA_DEAUTH: ++ ++ if(!rtw_set_802_11_disassociate(padapter)) ++ ret = -1; ++ ++ break; ++ ++ case IEEE_MLME_STA_DISASSOC: ++ ++ if(!rtw_set_802_11_disassociate(padapter)) ++ ret = -1; ++ ++ break; ++ ++ default: ++ ret = -EOPNOTSUPP; ++ break; ++ } ++ ++ return ret; ++ ++} ++ ++static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p) ++{ ++ struct ieee_param *param; ++ uint ret=0; ++ ++ //down(&ieee->wx_sem); ++ ++ if (p->length < sizeof(struct ieee_param) || !p->pointer){ ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ param = (struct ieee_param *)rtw_malloc(p->length); ++ if (param == NULL) ++ { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ if (copy_from_user(param, p->pointer, p->length)) ++ { ++ rtw_mfree((u8*)param, p->length); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ switch (param->cmd) { ++ ++ case IEEE_CMD_SET_WPA_PARAM: ++ ret = wpa_set_param(dev, param->u.wpa_param.name, param->u.wpa_param.value); ++ break; ++ ++ case IEEE_CMD_SET_WPA_IE: ++ //ret = wpa_set_wpa_ie(dev, param, p->length); ++ ret = rtw_set_wpa_ie((_adapter *)rtw_netdev_priv(dev), (char*)param->u.wpa_ie.data, (u16)param->u.wpa_ie.len); ++ break; ++ ++ case IEEE_CMD_SET_ENCRYPTION: ++ ret = wpa_set_encryption(dev, param, p->length); ++ break; ++ ++ case IEEE_CMD_MLME: ++ ret = wpa_mlme(dev, param->u.mlme.command, param->u.mlme.reason_code); ++ break; ++ ++ default: ++ DBG_871X("Unknown WPA supplicant request: %d\n", param->cmd); ++ ret = -EOPNOTSUPP; ++ break; ++ ++ } ++ ++ if (ret == 0 && copy_to_user(p->pointer, param, p->length)) ++ ret = -EFAULT; ++ ++ rtw_mfree((u8 *)param, p->length); ++ ++out: ++ ++ //up(&ieee->wx_sem); ++ ++ return ret; ++ ++} ++ ++#ifdef CONFIG_AP_MODE ++static u8 set_pairwise_key(_adapter *padapter, struct sta_info *psta) ++{ ++ struct cmd_obj* ph2c; ++ struct set_stakey_parm *psetstakey_para; ++ struct cmd_priv *pcmdpriv=&padapter->cmdpriv; ++ u8 res=_SUCCESS; ++ ++ ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if ( ph2c == NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ ++ psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm)); ++ if(psetstakey_para==NULL){ ++ rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj)); ++ res=_FAIL; ++ goto exit; ++ } ++ ++ init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_); ++ ++ ++ psetstakey_para->algorithm = (u8)psta->dot118021XPrivacy; ++ ++ _rtw_memcpy(psetstakey_para->addr, psta->hwaddr, ETH_ALEN); ++ ++ _rtw_memcpy(psetstakey_para->key, &psta->dot118021x_UncstKey, 16); ++ ++ ++ res = rtw_enqueue_cmd(pcmdpriv, ph2c); ++ ++exit: ++ ++ return res; ++ ++} ++ ++static int set_group_key(_adapter *padapter, u8 *key, u8 alg, int keyid) ++{ ++ u8 keylen; ++ struct cmd_obj* pcmd; ++ struct setkey_parm *psetkeyparm; ++ struct cmd_priv *pcmdpriv=&(padapter->cmdpriv); ++ int res=_SUCCESS; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj)); ++ if(pcmd==NULL){ ++ res= _FAIL; ++ goto exit; ++ } ++ psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm)); ++ if(psetkeyparm==NULL){ ++ rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj)); ++ res= _FAIL; ++ goto exit; ++ } ++ ++ _rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm)); ++ ++ psetkeyparm->keyid=(u8)keyid; ++ if (is_wep_enc(alg)) ++ padapter->securitypriv.key_mask |= BIT(psetkeyparm->keyid); ++ ++ psetkeyparm->algorithm = alg; ++ ++ psetkeyparm->set_tx = 1; ++ ++ switch(alg) ++ { ++ case _WEP40_: ++ keylen = 5; ++ break; ++ case _WEP104_: ++ keylen = 13; ++ break; ++ case _TKIP_: ++ case _TKIP_WTMIC_: ++ case _AES_: ++ keylen = 16; ++ default: ++ keylen = 16; ++ } ++ ++ _rtw_memcpy(&(psetkeyparm->key[0]), key, keylen); ++ ++ pcmd->cmdcode = _SetKey_CMD_; ++ pcmd->parmbuf = (u8 *)psetkeyparm; ++ pcmd->cmdsz = (sizeof(struct setkey_parm)); ++ pcmd->rsp = NULL; ++ pcmd->rspsz = 0; ++ ++ ++ _rtw_init_listhead(&pcmd->list); ++ ++ res = rtw_enqueue_cmd(pcmdpriv, pcmd); ++ ++exit: ++ ++ return res; ++ ++ ++} ++ ++static int set_wep_key(_adapter *padapter, u8 *key, u8 keylen, int keyid) ++{ ++ u8 alg; ++ ++ switch(keylen) ++ { ++ case 5: ++ alg =_WEP40_; ++ break; ++ case 13: ++ alg =_WEP104_; ++ break; ++ default: ++ alg =_NO_PRIVACY_; ++ } ++ ++ return set_group_key(padapter, key, alg, keyid); ++ ++} ++ ++ ++static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len) ++{ ++ int ret = 0; ++ u32 wep_key_idx, wep_key_len,wep_total_len; ++ NDIS_802_11_WEP *pwep = NULL; ++ struct sta_info *psta = NULL, *pbcmc_sta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ param->u.crypt.err = 0; ++ param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0'; ++ ++ //sizeof(struct ieee_param) = 64 bytes; ++ //if (param_len != (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len) ++ if (param_len != sizeof(struct ieee_param) + param->u.crypt.key_len) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ if (param->u.crypt.idx >= WEP_KEYS) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ } ++ else ++ { ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(!psta) ++ { ++ //ret = -EINVAL; ++ DBG_871X("rtw_set_encryption(), sta has already been removed or never been added\n"); ++ goto exit; ++ } ++ } ++ ++ if (strcmp(param->u.crypt.alg, "none") == 0 && (psta==NULL)) ++ { ++ //todo:clear default encryption keys ++ ++ DBG_871X("clear default encryption keys, keyid=%d\n", param->u.crypt.idx); ++ ++ goto exit; ++ } ++ ++ ++ if (strcmp(param->u.crypt.alg, "WEP") == 0 && (psta==NULL)) ++ { ++ DBG_871X("r871x_set_encryption, crypt.alg = WEP\n"); ++ ++ wep_key_idx = param->u.crypt.idx; ++ wep_key_len = param->u.crypt.key_len; ++ ++ DBG_871X("r871x_set_encryption, wep_key_idx=%d, len=%d\n", wep_key_idx, wep_key_len); ++ ++ if((wep_key_idx >= WEP_KEYS) || (wep_key_len<=0)) ++ { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ ++ if (wep_key_len > 0) ++ { ++ wep_key_len = wep_key_len <= 5 ? 5 : 13; ++ wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial); ++ pwep =(NDIS_802_11_WEP *)rtw_malloc(wep_total_len); ++ if(pwep == NULL){ ++ DBG_871X(" r871x_set_encryption: pwep allocate fail !!!\n"); ++ goto exit; ++ } ++ ++ _rtw_memset(pwep, 0, wep_total_len); ++ ++ pwep->KeyLength = wep_key_len; ++ pwep->Length = wep_total_len; ++ ++ } ++ ++ pwep->KeyIndex = wep_key_idx; ++ ++ _rtw_memcpy(pwep->KeyMaterial, param->u.crypt.key, pwep->KeyLength); ++ ++ if(param->u.crypt.set_tx) ++ { ++ DBG_871X("wep, set_tx=1\n"); ++ ++ psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled; ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP40_; ++ psecuritypriv->dot118021XGrpPrivacy=_WEP40_; ++ ++ if(pwep->KeyLength==13) ++ { ++ psecuritypriv->dot11PrivacyAlgrthm=_WEP104_; ++ psecuritypriv->dot118021XGrpPrivacy=_WEP104_; ++ } ++ ++ ++ psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx; ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength); ++ ++ psecuritypriv->dot11DefKeylen[wep_key_idx]=pwep->KeyLength; ++ ++ set_wep_key(padapter, pwep->KeyMaterial, pwep->KeyLength, wep_key_idx); ++ ++ ++ } ++ else ++ { ++ DBG_871X("wep, set_tx=0\n"); ++ ++ //don't update "psecuritypriv->dot11PrivacyAlgrthm" and ++ //"psecuritypriv->dot11PrivacyKeyIndex=keyid", but can rtw_set_key to cam ++ ++ _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength); ++ ++ psecuritypriv->dot11DefKeylen[wep_key_idx] = pwep->KeyLength; ++ ++ set_wep_key(padapter, pwep->KeyMaterial, pwep->KeyLength, wep_key_idx); ++ ++ } ++ ++ goto exit; ++ ++ } ++ ++ ++ if(!psta && check_fwstate(pmlmepriv, WIFI_AP_STATE)) // //group key ++ { ++ if(param->u.crypt.set_tx ==1) ++ { ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ DBG_871X("%s, set group_key, WEP\n", __FUNCTION__); ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ DBG_871X("%s, set group_key, TKIP\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _TKIP_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ DBG_871X("%s, set group_key, CCMP\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _AES_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ } ++ else ++ { ++ DBG_871X("%s, set group_key, none\n", __FUNCTION__); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ } ++ ++ psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ psecuritypriv->binstallGrpkey = _TRUE; ++ ++ psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!! ++ ++ set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx); ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta) ++ { ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy ++ } ++ ++ } ++ ++ goto exit; ++ ++ } ++ ++ if(psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X && psta) // psk/802_1x ++ { ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) ++ { ++ if(param->u.crypt.set_tx ==1) ++ { ++ _rtw_memcpy(psta->dot118021x_UncstKey.skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ DBG_871X("%s, set pairwise key, WEP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psta->dot118021XPrivacy = _WEP104_; ++ } ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ DBG_871X("%s, set pairwise key, TKIP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _TKIP_; ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ ++ DBG_871X("%s, set pairwise key, CCMP\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _AES_; ++ } ++ else ++ { ++ DBG_871X("%s, set pairwise key, none\n", __FUNCTION__); ++ ++ psta->dot118021XPrivacy = _NO_PRIVACY_; ++ } ++ ++ set_pairwise_key(padapter, psta); ++ ++ psta->ieee8021x_blocked = _FALSE; ++ ++ } ++ else//group key??? ++ { ++ if(strcmp(param->u.crypt.alg, "WEP") == 0) ++ { ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ psecuritypriv->dot118021XGrpPrivacy = _WEP40_; ++ if(param->u.crypt.key_len==13) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _WEP104_; ++ } ++ } ++ else if(strcmp(param->u.crypt.alg, "TKIP") == 0) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _TKIP_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ ++ //DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len); ++ //set mic key ++ _rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8); ++ _rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8); ++ ++ psecuritypriv->busetkipkey = _TRUE; ++ ++ } ++ else if(strcmp(param->u.crypt.alg, "CCMP") == 0) ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _AES_; ++ ++ _rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey, param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len)); ++ } ++ else ++ { ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ } ++ ++ psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx; ++ ++ psecuritypriv->binstallGrpkey = _TRUE; ++ ++ psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!! ++ ++ set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx); ++ ++ pbcmc_sta=rtw_get_bcmc_stainfo(padapter); ++ if(pbcmc_sta) ++ { ++ pbcmc_sta->ieee8021x_blocked = _FALSE; ++ pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy ++ } ++ ++ } ++ ++ } ++ ++ } ++ ++exit: ++ ++ if(pwep) ++ { ++ rtw_mfree((u8 *)pwep,wep_total_len); ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_set_beacon(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ unsigned char *pbuf = param->u.bcn_ie.buf; ++ ++ ++ DBG_871X("%s, len=%d\n", __FUNCTION__, len); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ _rtw_memcpy(&pstapriv->max_num_sta, param->u.bcn_ie.reserved, 2); ++ ++ if((pstapriv->max_num_sta>NUM_STA) || (pstapriv->max_num_sta<=0)) ++ pstapriv->max_num_sta = NUM_STA; ++ ++ ++ if(rtw_check_beacon_data(padapter, pbuf, (len-12-2)) == _SUCCESS)// 12 = param header, 2:no packed ++ ret = 0; ++ else ++ ret = -EINVAL; ++ ++ ++ return ret; ++ ++} ++ ++static int rtw_hostapd_sta_flush(struct net_device *dev) ++{ ++ //_irqL irqL; ++ //_list *phead, *plist; ++ int ret=0; ++ //struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ //struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ flush_all_cam_entry(padapter); //clear CAM ++ ++ ret = rtw_sta_flush(padapter); ++ ++ return ret; ++ ++} ++ ++static int rtw_add_sta(struct net_device *dev, struct ieee_param *param) ++{ ++ _irqL irqL; ++ int ret=0; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("rtw_add_sta(aid=%d)=" MAC_FMT "\n", param->u.add_sta.aid, MAC_ARG(param->sta_addr)); ++ ++ if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE) ++ { ++ return -EINVAL; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++/* ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(psta) ++ { ++ DBG_871X("rtw_add_sta(), free has been added psta=%p\n", psta); ++ _enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ rtw_free_stainfo(padapter, psta); ++ _exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL); ++ ++ psta = NULL; ++ } ++*/ ++ //psta = rtw_alloc_stainfo(pstapriv, param->sta_addr); ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(psta) ++ { ++ int flags = param->u.add_sta.flags; ++ ++ //DBG_871X("rtw_add_sta(), init sta's variables, psta=%p\n", psta); ++ ++ psta->aid = param->u.add_sta.aid;//aid=1~2007 ++ ++ _rtw_memcpy(psta->bssrateset, param->u.add_sta.tx_supp_rates, 16); ++ ++ ++ //check wmm cap. ++ if(WLAN_STA_WME&flags) ++ psta->qos_option = 1; ++ else ++ psta->qos_option = 0; ++ ++ if(pmlmepriv->qospriv.qos_option == 0) ++ psta->qos_option = 0; ++ ++ ++#ifdef CONFIG_80211N_HT ++ //chec 802.11n ht cap. ++ if(WLAN_STA_HT&flags) ++ { ++ psta->htpriv.ht_option = _TRUE; ++ psta->qos_option = 1; ++ _rtw_memcpy((void*)&psta->htpriv.ht_cap, (void*)¶m->u.add_sta.ht_cap, sizeof(struct rtw_ieee80211_ht_cap)); ++ } ++ else ++ { ++ psta->htpriv.ht_option = _FALSE; ++ } ++ ++ if(pmlmepriv->htpriv.ht_option == _FALSE) ++ psta->htpriv.ht_option = _FALSE; ++#endif ++ ++ ++ update_sta_info_apmode(padapter, psta); ++ ++ ++ } ++ else ++ { ++ ret = -ENOMEM; ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_del_sta(struct net_device *dev, struct ieee_param *param) ++{ ++ _irqL irqL; ++ int ret=0; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("rtw_del_sta=" MAC_FMT "\n", MAC_ARG(param->sta_addr)); ++ ++ if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE) ++ { ++ return -EINVAL; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(psta) ++ { ++ u8 updated=_FALSE; ++ ++ //DBG_871X("free psta=%p, aid=%d\n", psta, psta->aid); ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ if(rtw_is_list_empty(&psta->asoc_list)==_FALSE) ++ { ++ rtw_list_delete(&psta->asoc_list); ++ pstapriv->asoc_list_cnt--; ++ updated = ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING); ++ ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ associated_clients_update(padapter, updated); ++ ++ psta = NULL; ++ ++ } ++ else ++ { ++ DBG_871X("rtw_del_sta(), sta has already been removed or never been added\n"); ++ ++ //ret = -1; ++ } ++ ++ ++ return ret; ++ ++} ++ ++static int rtw_ioctl_get_sta_data(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct ieee_param_ex *param_ex = (struct ieee_param_ex *)param; ++ struct sta_data *psta_data = (struct sta_data *)param_ex->data; ++ ++ DBG_871X("rtw_ioctl_get_sta_info, sta_addr: " MAC_FMT "\n", MAC_ARG(param_ex->sta_addr)); ++ ++ if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE) ++ { ++ return -EINVAL; ++ } ++ ++ if (param_ex->sta_addr[0] == 0xff && param_ex->sta_addr[1] == 0xff && ++ param_ex->sta_addr[2] == 0xff && param_ex->sta_addr[3] == 0xff && ++ param_ex->sta_addr[4] == 0xff && param_ex->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, param_ex->sta_addr); ++ if(psta) ++ { ++#if 0 ++ struct { ++ u16 aid; ++ u16 capability; ++ int flags; ++ u32 sta_set; ++ u8 tx_supp_rates[16]; ++ u32 tx_supp_rates_len; ++ struct rtw_ieee80211_ht_cap ht_cap; ++ u64 rx_pkts; ++ u64 rx_bytes; ++ u64 rx_drops; ++ u64 tx_pkts; ++ u64 tx_bytes; ++ u64 tx_drops; ++ } get_sta; ++#endif ++ psta_data->aid = (u16)psta->aid; ++ psta_data->capability = psta->capability; ++ psta_data->flags = psta->flags; ++ ++/* ++ nonerp_set : BIT(0) ++ no_short_slot_time_set : BIT(1) ++ no_short_preamble_set : BIT(2) ++ no_ht_gf_set : BIT(3) ++ no_ht_set : BIT(4) ++ ht_20mhz_set : BIT(5) ++*/ ++ ++ psta_data->sta_set =((psta->nonerp_set) | ++ (psta->no_short_slot_time_set <<1) | ++ (psta->no_short_preamble_set <<2) | ++ (psta->no_ht_gf_set <<3) | ++ (psta->no_ht_set <<4) | ++ (psta->ht_20mhz_set <<5)); ++ ++ psta_data->tx_supp_rates_len = psta->bssratelen; ++ _rtw_memcpy(psta_data->tx_supp_rates, psta->bssrateset, psta->bssratelen); ++ ++ _rtw_memcpy(&psta_data->ht_cap, &psta->htpriv.ht_cap, sizeof(struct rtw_ieee80211_ht_cap)); ++ ++ psta_data->rx_pkts = psta->sta_stats.rx_data_pkts; ++ psta_data->rx_bytes = psta->sta_stats.rx_bytes; ++ psta_data->rx_drops = psta->sta_stats.rx_drops; ++ ++ psta_data->tx_pkts = psta->sta_stats.tx_pkts; ++ psta_data->tx_bytes = psta->sta_stats.tx_bytes; ++ psta_data->tx_drops = psta->sta_stats.tx_drops; ++ ++ ++ } ++ else ++ { ++ ret = -1; ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_get_sta_wpaie(struct net_device *dev, struct ieee_param *param) ++{ ++ int ret=0; ++ struct sta_info *psta = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ DBG_871X("rtw_get_sta_wpaie, sta_addr: " MAC_FMT "\n", MAC_ARG(param->sta_addr)); ++ ++ if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE) ++ { ++ return -EINVAL; ++ } ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ psta = rtw_get_stainfo(pstapriv, param->sta_addr); ++ if(psta) ++ { ++ if((psta->wpa_ie[0] == WLAN_EID_RSN) || (psta->wpa_ie[0] == WLAN_EID_GENERIC)) ++ { ++ int wpa_ie_len; ++ int copy_len; ++ ++ wpa_ie_len = psta->wpa_ie[1]; ++ ++ copy_len = ((wpa_ie_len+2) > sizeof(psta->wpa_ie)) ? (sizeof(psta->wpa_ie)):(wpa_ie_len+2); ++ ++ param->u.wpa_ie.len = copy_len; ++ ++ _rtw_memcpy(param->u.wpa_ie.reserved, psta->wpa_ie, copy_len); ++ } ++ else ++ { ++ //ret = -1; ++ DBG_871X("sta's wpa_ie is NONE\n"); ++ } ++ } ++ else ++ { ++ ret = -1; ++ } ++ ++ return ret; ++ ++} ++ ++static int rtw_set_wps_beacon(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ unsigned char wps_oui[4]={0x0,0x50,0xf2,0x04}; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ int ie_len; ++ ++ DBG_871X("%s, len=%d\n", __FUNCTION__, len); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ ie_len = len-12-2;// 12 = param header, 2:no packed ++ ++ ++ if(pmlmepriv->wps_beacon_ie) ++ { ++ rtw_mfree(pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len); ++ pmlmepriv->wps_beacon_ie = NULL; ++ } ++ ++ if(ie_len>0) ++ { ++ pmlmepriv->wps_beacon_ie = rtw_malloc(ie_len); ++ pmlmepriv->wps_beacon_ie_len = ie_len; ++ if ( pmlmepriv->wps_beacon_ie == NULL) { ++ DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ } ++ ++ _rtw_memcpy(pmlmepriv->wps_beacon_ie, param->u.bcn_ie.buf, ie_len); ++ ++ update_beacon(padapter, _VENDOR_SPECIFIC_IE_, wps_oui, _TRUE); ++ ++ pmlmeext->bstart_bss = _TRUE; ++ ++ } ++ ++ ++ return ret; ++ ++} ++ ++static int rtw_set_wps_probe_resp(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ int ie_len; ++ ++ DBG_871X("%s, len=%d\n", __FUNCTION__, len); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ ie_len = len-12-2;// 12 = param header, 2:no packed ++ ++ ++ if(pmlmepriv->wps_probe_resp_ie) ++ { ++ rtw_mfree(pmlmepriv->wps_probe_resp_ie, pmlmepriv->wps_probe_resp_ie_len); ++ pmlmepriv->wps_probe_resp_ie = NULL; ++ } ++ ++ if(ie_len>0) ++ { ++ pmlmepriv->wps_probe_resp_ie = rtw_malloc(ie_len); ++ pmlmepriv->wps_probe_resp_ie_len = ie_len; ++ if ( pmlmepriv->wps_probe_resp_ie == NULL) { ++ DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ } ++ _rtw_memcpy(pmlmepriv->wps_probe_resp_ie, param->u.bcn_ie.buf, ie_len); ++ } ++ ++ ++ return ret; ++ ++} ++ ++static int rtw_set_wps_assoc_resp(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ int ie_len; ++ ++ DBG_871X("%s, len=%d\n", __FUNCTION__, len); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ ie_len = len-12-2;// 12 = param header, 2:no packed ++ ++ ++ if(pmlmepriv->wps_assoc_resp_ie) ++ { ++ rtw_mfree(pmlmepriv->wps_assoc_resp_ie, pmlmepriv->wps_assoc_resp_ie_len); ++ pmlmepriv->wps_assoc_resp_ie = NULL; ++ } ++ ++ if(ie_len>0) ++ { ++ pmlmepriv->wps_assoc_resp_ie = rtw_malloc(ie_len); ++ pmlmepriv->wps_assoc_resp_ie_len = ie_len; ++ if ( pmlmepriv->wps_assoc_resp_ie == NULL) { ++ DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ return -EINVAL; ++ } ++ ++ _rtw_memcpy(pmlmepriv->wps_assoc_resp_ie, param->u.bcn_ie.buf, ie_len); ++ } ++ ++ ++ return ret; ++ ++} ++ ++static int rtw_set_hidden_ssid(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *mlmepriv = &(adapter->mlmepriv); ++ struct mlme_ext_priv *mlmeext = &(adapter->mlmeextpriv); ++ struct mlme_ext_info *mlmeinfo = &(mlmeext->mlmext_info); ++ int ie_len; ++ u8 *ssid_ie; ++ char ssid[NDIS_802_11_LENGTH_SSID + 1]; ++ sint ssid_len; ++ u8 ignore_broadcast_ssid; ++ ++ if(check_fwstate(mlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EPERM; ++ ++ if (param->u.bcn_ie.reserved[0] != 0xea) ++ return -EINVAL; ++ ++ mlmeinfo->hidden_ssid_mode = ignore_broadcast_ssid = param->u.bcn_ie.reserved[1]; ++ ++ ie_len = len-12-2;// 12 = param header, 2:no packed ++ ssid_ie = rtw_get_ie(param->u.bcn_ie.buf, WLAN_EID_SSID, &ssid_len, ie_len); ++ ++ if (ssid_ie && ssid_len) { ++ WLAN_BSSID_EX *pbss_network = &mlmepriv->cur_network.network; ++ WLAN_BSSID_EX *pbss_network_ext = &mlmeinfo->network; ++ ++ _rtw_memcpy(ssid, ssid_ie+2, ssid_len); ++ ssid[ssid_len>NDIS_802_11_LENGTH_SSID?NDIS_802_11_LENGTH_SSID:ssid_len] = 0x0; ++ ++ if(0) ++ DBG_871X(FUNC_ADPT_FMT" ssid:(%s,%d), from ie:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter), ++ ssid, ssid_len, ++ pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength, ++ pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength); ++ ++ _rtw_memcpy(pbss_network->Ssid.Ssid, (void *)ssid, ssid_len); ++ pbss_network->Ssid.SsidLength = ssid_len; ++ _rtw_memcpy(pbss_network_ext->Ssid.Ssid, (void *)ssid, ssid_len); ++ pbss_network_ext->Ssid.SsidLength = ssid_len; ++ ++ if(0) ++ DBG_871X(FUNC_ADPT_FMT" after ssid:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter), ++ pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength, ++ pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength); ++ } ++ ++ DBG_871X(FUNC_ADPT_FMT" ignore_broadcast_ssid:%d, %s,%d\n", FUNC_ADPT_ARG(adapter), ++ ignore_broadcast_ssid, ssid, ssid_len); ++ ++ return ret; ++} ++ ++static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ ret = rtw_acl_remove_sta(padapter, param->sta_addr); ++ ++ return ret; ++ ++} ++ ++static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff && ++ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff && ++ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) ++ { ++ return -EINVAL; ++ } ++ ++ ret = rtw_acl_add_sta(padapter, param->sta_addr); ++ ++ return ret; ++ ++} ++ ++static int rtw_ioctl_set_macaddr_acl(struct net_device *dev, struct ieee_param *param, int len) ++{ ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE) ++ return -EINVAL; ++ ++ rtw_set_macaddr_acl(padapter, param->u.mlme.command); ++ ++ return ret; ++} ++ ++static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p) ++{ ++ struct ieee_param *param; ++ int ret=0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ /* ++ * this function is expect to call in master mode, which allows no power saving ++ * so, we just check hw_init_completed instead of call rfpwrstate_check() ++ */ ++ ++ if (padapter->hw_init_completed==_FALSE){ ++ ret = -EPERM; ++ goto out; ++ } ++ ++ ++ //if (p->length < sizeof(struct ieee_param) || !p->pointer){ ++ if(!p->pointer){ ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ param = (struct ieee_param *)rtw_malloc(p->length); ++ if (param == NULL) ++ { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ if (copy_from_user(param, p->pointer, p->length)) ++ { ++ rtw_mfree((u8*)param, p->length); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ //DBG_871X("%s, cmd=%d\n", __FUNCTION__, param->cmd); ++ ++ switch (param->cmd) ++ { ++ case RTL871X_HOSTAPD_FLUSH: ++ ++ ret = rtw_hostapd_sta_flush(dev); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_ADD_STA: ++ ++ ret = rtw_add_sta(dev, param); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_REMOVE_STA: ++ ++ ret = rtw_del_sta(dev, param); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_BEACON: ++ ++ ret = rtw_set_beacon(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_SET_ENCRYPTION: ++ ++ ret = rtw_set_encryption(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_GET_WPAIE_STA: ++ ++ ret = rtw_get_sta_wpaie(dev, param); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_WPS_BEACON: ++ ++ ret = rtw_set_wps_beacon(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_WPS_PROBE_RESP: ++ ++ ret = rtw_set_wps_probe_resp(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP: ++ ++ ret = rtw_set_wps_assoc_resp(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_HIDDEN_SSID: ++ ++ ret = rtw_set_hidden_ssid(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_GET_INFO_STA: ++ ++ ret = rtw_ioctl_get_sta_data(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_SET_MACADDR_ACL: ++ ++ ret = rtw_ioctl_set_macaddr_acl(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_ACL_ADD_STA: ++ ++ ret = rtw_ioctl_acl_add_sta(dev, param, p->length); ++ ++ break; ++ ++ case RTL871X_HOSTAPD_ACL_REMOVE_STA: ++ ++ ret = rtw_ioctl_acl_remove_sta(dev, param, p->length); ++ ++ break; ++ ++ default: ++ DBG_871X("Unknown hostapd request: %d\n", param->cmd); ++ ret = -EOPNOTSUPP; ++ break; ++ ++ } ++ ++ if (ret == 0 && copy_to_user(p->pointer, param, p->length)) ++ ret = -EFAULT; ++ ++ ++ rtw_mfree((u8 *)param, p->length); ++ ++out: ++ ++ return ret; ++ ++} ++#endif ++ ++#include ++static int rtw_wx_set_priv(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *awrq, ++ char *extra) ++{ ++ ++#ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV ++ char *ext_dbg; ++#endif ++ ++ int ret = 0; ++ int len = 0; ++ char *ext; ++ int i; ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_point *dwrq = (struct iw_point*)awrq; ++ ++ //RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_, ("+rtw_wx_set_priv\n")); ++ if(dwrq->length == 0) ++ return -EFAULT; ++ len = dwrq->length; ++ if (!(ext = rtw_vmalloc(len))) ++ return -ENOMEM; ++ ++ if (copy_from_user(ext, dwrq->pointer, len)) { ++ rtw_vmfree(ext, len); ++ return -EFAULT; ++ } ++ ++ ++ //RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_, ++ // ("rtw_wx_set_priv: %s req=%s\n", ++ // dev->name, ext)); ++ ++ #ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV ++ if (!(ext_dbg = rtw_vmalloc(len))) ++ { ++ rtw_vmfree(ext, len); ++ return -ENOMEM; ++ } ++ ++ _rtw_memcpy(ext_dbg, ext, len); ++ #endif ++ ++ //added for wps2.0 @20110524 ++ if(dwrq->flags == 0x8766 && len > 8) ++ { ++ u32 cp_sz; ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ u8 *probereq_wpsie = ext; ++ int probereq_wpsie_len = len; ++ u8 wps_oui[4]={0x0,0x50,0xf2,0x04}; ++ ++ if((_VENDOR_SPECIFIC_IE_ == probereq_wpsie[0]) && ++ (_rtw_memcmp(&probereq_wpsie[2], wps_oui, 4) ==_TRUE)) ++ { ++ cp_sz = probereq_wpsie_len>MAX_WPS_IE_LEN ? MAX_WPS_IE_LEN:probereq_wpsie_len; ++ ++ //_rtw_memcpy(pmlmepriv->probereq_wpsie, probereq_wpsie, cp_sz); ++ //pmlmepriv->probereq_wpsie_len = cp_sz; ++ ++ printk("probe_req_wps_ielen=%d\n", cp_sz); ++ ++ if(pmlmepriv->wps_probe_req_ie) ++ { ++ u32 free_len = pmlmepriv->wps_probe_req_ie_len; ++ pmlmepriv->wps_probe_req_ie_len = 0; ++ rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len); ++ pmlmepriv->wps_probe_req_ie = NULL; ++ } ++ ++ pmlmepriv->wps_probe_req_ie = rtw_malloc(cp_sz); ++ if ( pmlmepriv->wps_probe_req_ie == NULL) { ++ printk("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__); ++ ret = -EINVAL; ++ goto FREE_EXT; ++ ++ } ++ ++ _rtw_memcpy(pmlmepriv->wps_probe_req_ie, probereq_wpsie, cp_sz); ++ pmlmepriv->wps_probe_req_ie_len = cp_sz; ++ ++ } ++ ++ goto FREE_EXT; ++ ++ } ++ ++ if( len >= WEXT_CSCAN_HEADER_SIZE ++ && _rtw_memcmp(ext, WEXT_CSCAN_HEADER, WEXT_CSCAN_HEADER_SIZE) == _TRUE ++ ){ ++ ret = rtw_wx_set_scan(dev, info, awrq, ext); ++ goto FREE_EXT; ++ } ++ ++#ifdef CONFIG_ANDROID ++ //DBG_871X("rtw_wx_set_priv: %s req=%s\n", dev->name, ext); ++ ++ i = rtw_android_cmdstr_to_num(ext); ++ ++ switch(i) { ++ case ANDROID_WIFI_CMD_START : ++ indicate_wx_custom_event(padapter, "START"); ++ break; ++ case ANDROID_WIFI_CMD_STOP : ++ indicate_wx_custom_event(padapter, "STOP"); ++ break; ++ case ANDROID_WIFI_CMD_RSSI : ++ { ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct wlan_network *pcur_network = &pmlmepriv->cur_network; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ sprintf(ext, "%s rssi %d", pcur_network->network.Ssid.Ssid, padapter->recvpriv.rssi); ++ } else { ++ sprintf(ext, "OK"); ++ } ++ } ++ break; ++ case ANDROID_WIFI_CMD_LINKSPEED : ++ { ++ u16 mbps = rtw_get_cur_max_rate(padapter)/10; ++ sprintf(ext, "LINKSPEED %d", mbps); ++ } ++ break; ++ case ANDROID_WIFI_CMD_MACADDR : ++ sprintf(ext, "MACADDR = " MAC_FMT, MAC_ARG(dev->dev_addr)); ++ break; ++ case ANDROID_WIFI_CMD_SCAN_ACTIVE : ++ { ++ //rtw_set_scan_mode(padapter, SCAN_ACTIVE); ++ sprintf(ext, "OK"); ++ } ++ break; ++ case ANDROID_WIFI_CMD_SCAN_PASSIVE : ++ { ++ //rtw_set_scan_mode(padapter, SCAN_PASSIVE); ++ sprintf(ext, "OK"); ++ } ++ break; ++ ++ case ANDROID_WIFI_CMD_COUNTRY : ++ { ++ char country_code[10]; ++ sscanf(ext, "%*s %s", country_code); ++ rtw_set_country(padapter, country_code); ++ sprintf(ext, "OK"); ++ } ++ break; ++ default : ++ #ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV ++ DBG_871X("%s: %s unknowned req=%s\n", __FUNCTION__, ++ dev->name, ext_dbg); ++ #endif ++ ++ sprintf(ext, "OK"); ++ ++ } ++ ++ if (copy_to_user(dwrq->pointer, ext, min(dwrq->length, (u16)(strlen(ext)+1)) ) ) ++ ret = -EFAULT; ++ ++ #ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV ++ DBG_871X("%s: %s req=%s rep=%s dwrq->length=%d, strlen(ext)+1=%d\n", __FUNCTION__, ++ dev->name, ext_dbg ,ext, dwrq->length, (u16)(strlen(ext)+1)); ++ #endif ++#endif //end of CONFIG_ANDROID ++ ++ ++FREE_EXT: ++ ++ rtw_vmfree(ext, len); ++ #ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV ++ rtw_vmfree(ext_dbg, len); ++ #endif ++ ++ //DBG_871X("rtw_wx_set_priv: (SIOCSIWPRIV) %s ret=%d\n", ++ // dev->name, ret); ++ ++ return ret; ++ ++} ++ ++static int rtw_mp_efuse_get(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wdata, char *extra) ++{ ++ struct iw_point *wrqu = (struct iw_point *)wdata; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ struct mp_priv *pmp_priv; ++ ++ int i,j =0; ++ u8 data[EFUSE_MAP_SIZE]; ++ u8 rawdata[EFUSE_MAX_SIZE]; ++ u16 mapLen=0; ++ char *pch, *ptmp, *token, *tmp[3]={0x00,0x00,0x00}; ++ u16 addr = 0, cnts = 0, max_available_size = 0,raw_cursize = 0 ,raw_maxsize = 0; ++ ++ _rtw_memset(data, '\0', sizeof(data)); ++ _rtw_memset(rawdata, '\0', sizeof(rawdata)); ++ ++ if (copy_from_user(extra, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ pch = extra; ++ DBG_871X("%s: in=%s\n", __func__, extra); ++ ++ i=0; ++ //mac 16 "00e04c871200" rmap,00,2 ++ while ( (token = strsep (&pch,",") )!=NULL ) ++ { ++ if(i>2) break; ++ tmp[i] = token; ++ i++; ++ } ++ ++ if ( strcmp(tmp[0],"realmap") == 0 ) { ++ ++ DBG_871X("strcmp OK = %s \n" ,tmp[0]); ++ ++ mapLen = EFUSE_MAP_SIZE; ++ ++ if (rtw_efuse_map_read(padapter, 0, mapLen, data) == _SUCCESS){ ++ DBG_871X("\t rtw_efuse_map_read \n"); ++ }else { ++ DBG_871X("\t rtw_efuse_map_read : Fail \n"); ++ return -EFAULT; ++ } ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ DBG_871X("\tOFFSET\tVALUE(hex)\n"); ++ sprintf(extra, "%s \n", extra); ++ for ( i = 0; i < EFUSE_MAP_SIZE; i += 16 ) ++ { ++ DBG_871X("\t0x%02x\t", i); ++ sprintf(extra, "%s \t0x%02x\t", extra,i); ++ for (j = 0; j < 8; j++) ++ { ++ DBG_871X("%02X ", data[i+j]); ++ sprintf(extra, "%s %02X", extra, data[i+j]); ++ } ++ DBG_871X("\t"); ++ sprintf(extra,"%s\t",extra); ++ for (; j < 16; j++){ ++ DBG_871X("%02X ", data[i+j]); ++ sprintf(extra, "%s %02X", extra, data[i+j]); ++ } ++ DBG_871X("\n"); ++ sprintf(extra,"%s\n",extra); ++ } ++ DBG_871X("\n"); ++ wrqu->length = strlen(extra); ++ ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"rmap") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ // rmap addr cnts ++ addr = simple_strtoul(tmp[1], &ptmp, 16); ++ ++ DBG_871X("addr = %x \n" ,addr); ++ ++ cnts=simple_strtoul(tmp[2], &ptmp,10); ++ if(cnts==0) return -EINVAL; ++ ++ DBG_871X("cnts = %d \n" ,cnts); ++ //_rtw_memset(extra, '\0', wrqu->data.length); ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ if ((addr + cnts) > max_available_size) { ++ DBG_871X("(addr + cnts parameter error \n"); ++ return -EFAULT; ++ } ++ ++ if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL) ++ { ++ DBG_871X("rtw_efuse_access error \n"); ++ } ++ else{ ++ DBG_871X("rtw_efuse_access ok \n"); ++ } ++ ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ for ( i = 0; i < cnts; i ++) { ++ DBG_871X("0x%02x", data[i]); ++ sprintf(extra, "%s 0x%02X", extra, data[i]); ++ DBG_871X(" "); ++ sprintf(extra,"%s ",extra); ++ } ++ ++ wrqu->length = strlen(extra)+1; ++ ++ DBG_871X("extra = %s ", extra); ++ ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"realraw") == 0 ) { ++ addr=0; ++ mapLen = EFUSE_MAX_SIZE; ++ ++ if (rtw_efuse_access(padapter, _FALSE, addr, mapLen, rawdata) == _FAIL) ++ { ++ DBG_871X("\t rtw_efuse_map_read : Fail \n"); ++ return -EFAULT; ++ } else ++ { ++ DBG_871X("\t rtw_efuse_access raw ok \n"); ++ } ++ ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ for ( i=0; ilength = strlen(extra); ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"mac") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ #ifdef CONFIG_RTL8192C ++ addr = 0x16; ++ cnts = 6; ++ #endif ++ #ifdef CONFIG_RTL8192D ++ addr = 0x19; ++ cnts = 6; ++ #endif ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ if ((addr + mapLen) > max_available_size) { ++ DBG_871X("(addr + cnts parameter error \n"); ++ return -EFAULT; ++ } ++ if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL) ++ { ++ DBG_871X("rtw_efuse_access error \n"); ++ } ++ else{ ++ DBG_871X("rtw_efuse_access ok \n"); ++ } ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ for ( i = 0; i < cnts; i ++) { ++ DBG_871X("0x%02x", data[i]); ++ sprintf(extra, "%s 0x%02X", extra, data[i+j]); ++ DBG_871X(" "); ++ sprintf(extra,"%s ",extra); ++ } ++ wrqu->length = strlen(extra); ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"vidpid") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ #ifdef CONFIG_RTL8192C ++ addr=0x0a; ++ #endif ++ #ifdef CONFIG_RTL8192D ++ addr = 0x0c; ++ #endif ++ cnts = 4; ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ if ((addr + mapLen) > max_available_size) { ++ DBG_871X("(addr + cnts parameter error \n"); ++ return -EFAULT; ++ } ++ if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL) ++ { ++ DBG_871X("rtw_efuse_access error \n"); ++ } ++ else{ ++ DBG_871X("rtw_efuse_access ok \n"); ++ } ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ for ( i = 0; i < cnts; i ++) { ++ DBG_871X("0x%02x", data[i]); ++ sprintf(extra, "%s 0x%02X", extra, data[i+j]); ++ DBG_871X(" "); ++ sprintf(extra,"%s ",extra); ++ } ++ wrqu->length = strlen(extra); ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"ableraw") == 0 ) { ++ efuse_GetCurrentSize(padapter,&raw_cursize); ++ raw_maxsize = efuse_GetMaxSize(padapter); ++ sprintf(extra, "%s : [ available raw size] = %d",extra,raw_maxsize-raw_cursize); ++ wrqu->length = strlen(extra); ++ ++ return 0; ++ }else ++ { ++ sprintf(extra, "%s : Command not found\n",extra); ++ wrqu->length = strlen(extra); ++ return 0; ++ } ++ ++ return 0; ++} ++ ++static int rtw_mp_efuse_set(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wdata, char *extra) ++{ ++ struct iw_point *wrqu = (struct iw_point *)wdata; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ u8 buffer[40]; ++ u32 i,jj,kk; ++ u8 setdata[EFUSE_MAP_SIZE]; ++ u8 setrawdata[EFUSE_MAX_SIZE]; ++ char *pch, *ptmp, *token, *edata,*tmp[3]={0x00,0x00,0x00}; ++ ++ u16 addr = 0, max_available_size = 0; ++ u32 cnts = 0; ++ ++ pch = extra; ++ DBG_871X("%s: in=%s\n", __func__, extra); ++ ++ i=0; ++ while ( (token = strsep (&pch,",") )!=NULL ) ++ { ++ if(i>2) break; ++ tmp[i] = token; ++ i++; ++ } ++ ++ // tmp[0],[1],[2] ++ // wmap,addr,00e04c871200 ++ if ( strcmp(tmp[0],"wmap") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ if ( ! strlen( tmp[2] )/2 > 1 ) return -EFAULT; ++ ++ addr = simple_strtoul( tmp[1], &ptmp, 16 ); ++ addr = addr & 0xFF; ++ DBG_871X("addr = %x \n" ,addr); ++ ++ cnts = strlen( tmp[2] )/2; ++ if ( cnts == 0) return -EFAULT; ++ ++ DBG_871X("cnts = %d \n" ,cnts); ++ DBG_871X("target data = %s \n" ,tmp[2]); ++ ++ for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 ) ++ { ++ setdata[jj] = key_2char2num( tmp[2][kk], tmp[2][kk+ 1] ); ++ } ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if ((addr + cnts) > max_available_size) { ++ DBG_871X("parameter error \n"); ++ return -EFAULT; ++ } ++ if (rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL) { ++ DBG_871X("rtw_efuse_map_write error \n"); ++ return -EFAULT; ++ } else ++ DBG_871X("rtw_efuse_map_write ok \n"); ++ ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"wraw") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ if ( ! strlen( tmp[2] )/2 > 1 ) return -EFAULT; ++ addr = simple_strtoul( tmp[1], &ptmp, 16 ); ++ addr = addr & 0xFF; ++ DBG_871X("addr = %x \n" ,addr); ++ ++ cnts=strlen( tmp[2] )/2; ++ if ( cnts == 0) return -EFAULT; ++ ++ DBG_871X(" cnts = %d \n" ,cnts ); ++ DBG_871X("target data = %s \n" ,tmp[2] ); ++ ++ for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 ) ++ { ++ setrawdata[jj] = key_2char2num( tmp[2][kk], tmp[2][kk+ 1] ); ++ } ++ ++ if ( rtw_efuse_access( padapter, _TRUE, addr, cnts, setrawdata ) == _FAIL ){ ++ DBG_871X("\t rtw_efuse_map_read : Fail \n"); ++ return -EFAULT; ++ } else ++ DBG_871X("\t rtw_efuse_access raw ok \n"); ++ ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"mac") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ //mac,00e04c871200 ++ #ifdef CONFIG_RTL8192C ++ addr = 0x16; ++ #endif ++ #ifdef CONFIG_RTL8192D ++ addr = 0x19; ++ #endif ++ cnts = strlen( tmp[1] )/2; ++ if ( cnts == 0) return -EFAULT; ++ if ( cnts > 6 ){ ++ DBG_871X("error data for mac addr = %s \n" ,tmp[1]); ++ return -EFAULT; ++ } ++ ++ DBG_871X("target data = %s \n" ,tmp[1]); ++ ++ for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 ) ++ { ++ setdata[jj] = key_2char2num(tmp[1][kk], tmp[1][kk+ 1]); ++ } ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if ((addr + cnts) > max_available_size) { ++ DBG_871X("parameter error \n"); ++ return -EFAULT; ++ } ++ if ( rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL ) { ++ DBG_871X("rtw_efuse_map_write error \n"); ++ return -EFAULT; ++ } else ++ DBG_871X("rtw_efuse_map_write ok \n"); ++ ++ return 0; ++ } ++ else if ( strcmp(tmp[0],"vidpid") == 0 ) { ++ if ( tmp[1]==NULL || tmp[2]==NULL ) return -EINVAL; ++ // pidvid,da0b7881 ++ #ifdef CONFIG_RTL8192C ++ addr=0x0a; ++ #endif ++ #ifdef CONFIG_RTL8192D ++ addr = 0x0c; ++ #endif ++ ++ cnts=strlen( tmp[1] )/2; ++ if ( cnts == 0) return -EFAULT; ++ DBG_871X("target data = %s \n" ,tmp[1]); ++ ++ for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 ) ++ { ++ setdata[jj] = key_2char2num(tmp[1][kk], tmp[1][kk+ 1]); ++ } ++ ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ ++ if ((addr + cnts) > max_available_size) { ++ DBG_871X("parameter error \n"); ++ return -EFAULT; ++ } ++ ++ if ( rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL ) { ++ DBG_871X("rtw_efuse_map_write error \n"); ++ return -EFAULT; ++ } else ++ DBG_871X("rtw_efuse_map_write ok \n"); ++ ++ return 0; ++ } ++ else{ ++ DBG_871X("Command not found\n"); ++ return 0; ++ } ++ ++ return 0; ++} ++ ++ ++ ++#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT) ++ ++/* ++ * Input Format: %s,%d,%d ++ * %s is width, could be ++ * "b" for 1 byte ++ * "w" for WORD (2 bytes) ++ * "dw" for DWORD (4 bytes) ++ * 1st %d is address(offset) ++ * 2st %d is data to write ++ */ ++static int rtw_mp_write_reg(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ char *pch, *pnext, *ptmp; ++ char *width_str; ++ char width; ++ u32 addr, data; ++ int ret; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ pch = extra; ++ pnext = strpbrk(pch, " ,.-"); ++ if (pnext == NULL) return -EINVAL; ++ *pnext = 0; ++ width_str = pch; ++ ++ pch = pnext + 1; ++ pnext = strpbrk(pch, " ,.-"); ++ if (pnext == NULL) return -EINVAL; ++ *pnext = 0; ++ addr = simple_strtoul(pch, &ptmp, 16); ++ if (addr > 0x3FFF) return -EINVAL; ++ ++ pch = pnext + 1; ++ if ((pch - extra) >= wrqu->length) return -EINVAL; ++ data = simple_strtoul(pch, &ptmp, 16); ++ ++ ret = 0; ++ width = width_str[0]; ++ switch (width) { ++ case 'b': ++ // 1 byte ++ if (data > 0xFF) { ++ ret = -EINVAL; ++ break; ++ } ++ rtw_write8(padapter, addr, data); ++ break; ++ case 'w': ++ // 2 bytes ++ if (data > 0xFFFF) { ++ ret = -EINVAL; ++ break; ++ } ++ rtw_write16(padapter, addr, data); ++ break; ++ case 'd': ++ // 4 bytes ++ rtw_write32(padapter, addr, data); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ return ret; ++} ++ ++/* ++ * Input Format: %s,%d ++ * %s is width, could be ++ * "b" for 1 byte ++ * "w" for WORD (2 bytes) ++ * "dw" for DWORD (4 bytes) ++ * %d is address(offset) ++ * ++ * Return: ++ * %d for data readed ++ */ ++static int rtw_mp_read_reg(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ char input[wrqu->length]; ++ char *pch, *pnext, *ptmp; ++ char *width_str; ++ char width; ++ char data[20],tmp[20]; ++ u32 addr; ++ //u32 *data = (u32*)extra; ++ u32 ret, i=0, j=0, strtout=0; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (wrqu->length > 128) return -EFAULT; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ _rtw_memset(data, 0, 20); ++ _rtw_memset(tmp, 0, 20); ++ _rtw_memset(extra, 0, wrqu->length); ++ ++ pch = input; ++ pnext = strpbrk(pch, " ,.-"); ++ if (pnext == NULL) return -EINVAL; ++ *pnext = 0; ++ width_str = pch; ++ ++ pch = pnext + 1; ++ if ((pch - input) >= wrqu->length) return -EINVAL; ++ ++ addr = simple_strtoul(pch, &ptmp, 16); ++ if (addr > 0x3FFF) return -EINVAL; ++ ++ ret = 0; ++ width = width_str[0]; ++ switch (width) { ++ case 'b': ++ // 1 byte ++ // *(u8*)data = rtw_read8(padapter, addr); ++ sprintf(extra, "%d\n", rtw_read8(padapter, addr)); ++ wrqu->length = strlen(extra); ++ break; ++ case 'w': ++ // 2 bytes ++ //*(u16*)data = rtw_read16(padapter, addr); ++ sprintf(data, "%04d\n", rtw_read16(padapter, addr)); ++ for( i=0 ; i <= strlen(data) ; i++) ++ { ++ if( i%2==0 ) ++ { ++ tmp[j]=' '; ++ j++; ++ } ++ if ( data[i] != '\0' ) ++ tmp[j] = data[i]; ++ ++ j++; ++ } ++ pch = tmp; ++ DBG_871X("pch=%s",pch); ++ ++ while( *pch != '\0' ) ++ { ++ pnext = strpbrk(pch, " "); ++ pnext++; ++ if ( *pnext != '\0' ) ++ { ++ strtout = simple_strtoul (pnext , &ptmp, 16); ++ sprintf( extra, "%s %d" ,extra ,strtout ); ++ } ++ else{ ++ break; ++ } ++ pch = pnext; ++ } ++ wrqu->length = 6; ++ break; ++ case 'd': ++ // 4 bytes ++ //*data = rtw_read32(padapter, addr); ++ sprintf(data, "%08x", rtw_read32(padapter, addr)); ++ //add read data format blank ++ for( i=0 ; i <= strlen(data) ; i++) ++ { ++ if( i%2==0 ) ++ { ++ tmp[j]=' '; ++ j++; ++ } ++ tmp[j] = data[i]; ++ j++; ++ } ++ pch = tmp; ++ DBG_871X("pch=%s",pch); ++ ++ while( *pch != '\0' ) ++ { ++ pnext = strpbrk(pch, " "); ++ pnext++; ++ if ( *pnext != '\0' ) ++ { ++ strtout = simple_strtoul (pnext , &ptmp, 16); ++ sprintf( extra, "%s %d" ,extra ,strtout ); ++ } ++ else{ ++ break; ++ } ++ pch = pnext; ++ } ++ wrqu->length = strlen(extra); ++ break; ++ ++ default: ++ wrqu->length = 0; ++ ret = -EINVAL; ++ break; ++ ++ } ++ ++ return ret; ++} ++ ++/* ++ * Input Format: %d,%x,%x ++ * %d is RF path, should be smaller than MAX_RF_PATH_NUMS ++ * 1st %x is address(offset) ++ * 2st %x is data to write ++ */ ++ static int rtw_mp_write_rf(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++/*static int rtw_mp_write_rf(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++*/ ++ u32 path, addr, data; ++ int ret; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ ret = sscanf(extra, "%d,%x,%x", &path, &addr, &data); ++ if (ret < 3) return -EINVAL; ++ ++ if (path >= MAX_RF_PATH_NUMS) return -EINVAL; ++ if (addr > 0xFF) return -EINVAL; ++ if (data > 0xFFFFF) return -EINVAL; ++ _rtw_memset(extra, 0, wrqu->length); ++ ++ write_rfreg(padapter, path, addr, data); ++ ++ sprintf(extra, "write_rf completed \n"); ++ ++ return 0; ++} ++ ++/* ++ * Input Format: %d,%x ++ * %d is RF path, should be smaller than MAX_RF_PATH_NUMS ++ * %x is address(offset) ++ * ++ * Return: ++ * %d for data readed ++ */ ++static int rtw_mp_read_rf(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ char input[wrqu->length]; ++ char *pch, *pnext, *ptmp; ++ char data[20],tmp[20]; ++ //u32 *data = (u32*)extra; ++ u32 path, addr; ++ u32 ret,i=0 ,j=0,strtou=0; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ if (wrqu->length > 128) return -EFAULT; ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ ret = sscanf(input, "%d,%x", &path, &addr); ++ if (ret < 2) return -EINVAL; ++ ++ if (path >= MAX_RF_PATH_NUMS) return -EINVAL; ++ if (addr > 0xFF) return -EINVAL; ++ ++ _rtw_memset(extra, 0, wrqu->length); ++ ++ //*data = read_rfreg(padapter, path, addr); ++ sprintf(data, "%08x", read_rfreg(padapter, path, addr)); ++ //add read data format blank ++ for( i=0 ; i <= strlen(data) ; i++) ++ { ++ if( i%2==0 ) ++ { ++ tmp[j]=' '; ++ j++; ++ } ++ tmp[j] = data[i]; ++ j++; ++ } ++ pch = tmp; ++ DBG_871X("pch=%s",pch); ++ ++ while( *pch != '\0' ) ++ { ++ pnext = strpbrk(pch, " "); ++ pnext++; ++ if ( *pnext != '\0' ) ++ { ++ strtou = simple_strtoul (pnext , &ptmp, 16); ++ sprintf( extra, "%s %d" ,extra ,strtou ); ++ } ++ else{ ++ break; ++ } ++ pch = pnext; ++ } ++ wrqu->length = strlen(extra); ++ ++ return 0; ++} ++ ++static int rtw_mp_start(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 val8; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ if (padapter->registrypriv.mp_mode == 0) ++ return -EPERM; ++ ++ if (padapter->mppriv.mode == MP_OFF) { ++ if (mp_start_test(padapter) == _FAIL) ++ return -EPERM; ++ padapter->mppriv.mode = MP_ON; ++ } ++ ++ return 0; ++} ++ ++static int rtw_mp_stop(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ if (padapter->mppriv.mode != MP_OFF) { ++ mp_stop_test(padapter); ++ padapter->mppriv.mode = MP_OFF; ++ } ++ ++ return 0; ++} ++ ++extern int wifirate2_ratetbl_inx(unsigned char rate); ++ ++static int rtw_mp_rate(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u32 rate = MPT_RATE_1M; ++ u8 input[wrqu->length]; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ rate = rtw_atoi(input); ++ sprintf( extra, "Set data rate to %d" , rate ); ++ ++ if(rate <= 0x7f) ++ rate = wifirate2_ratetbl_inx( (u8)rate); ++ else ++ rate =(rate-0x80+MPT_RATE_MCS0); ++ ++ //DBG_871X("%s: rate=%d\n", __func__, rate); ++ ++ if (rate >= MPT_RATE_LAST ) ++ return -EINVAL; ++ ++ padapter->mppriv.rateidx = rate; ++ Hal_SetDataRate(padapter); ++ ++ wrqu->length = strlen(extra) + 1; ++ return 0; ++} ++ ++static int rtw_mp_channel(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ u8 input[wrqu->length]; ++ u32 channel = 1; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ channel = rtw_atoi(input); ++ //DBG_871X("%s: channel=%d\n", __func__, channel); ++ sprintf( extra, "Change channel %d to channel %d", padapter->mppriv.channel , channel ); ++ ++ padapter->mppriv.channel = channel; ++ Hal_SetChannel(padapter); ++ ++ wrqu->length = strlen(extra) + 1; ++ return 0; ++} ++ ++static int rtw_mp_bandwidth(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u32 bandwidth=0, sg=0; ++ //u8 buffer[40]; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ //if (copy_from_user(buffer, (void*)wrqu->data.pointer, wrqu->data.length)) ++ // return -EFAULT; ++ ++ //DBG_871X("%s:iwpriv in=%s\n", __func__, extra); ++ ++ sscanf(extra, "40M=%d,shortGI=%d", &bandwidth, &sg); ++ ++ if (bandwidth != HT_CHANNEL_WIDTH_40) ++ bandwidth = HT_CHANNEL_WIDTH_20; ++ ++ //DBG_871X("%s: bw=%d sg=%d \n", __func__, bandwidth , sg); ++ ++ padapter->mppriv.bandwidth = (u8)bandwidth; ++ padapter->mppriv.preamble = sg; ++ ++ SetBandwidth(padapter); ++ ++ return 0; ++} ++ ++static int rtw_mp_txpower(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u32 idx_a=0,idx_b=0; ++ u8 input[wrqu->length]; ++ ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ sscanf(input,"patha=%d,pathb=%d",&idx_a,&idx_b); ++ //DBG_871X("%s: tx_pwr_idx_a=%x b=%x\n", __func__, idx_a, idx_b); ++ ++ sprintf( extra, "Set power level path_A:%d path_B:%d", idx_a , idx_b ); ++ padapter->mppriv.txpoweridx = (u8)idx_a; ++ padapter->mppriv.txpoweridx_b = (u8)idx_b; ++ ++ Hal_SetAntennaPathPower(padapter); ++ ++ wrqu->length = strlen(extra) + 1; ++ return 0; ++} ++ ++static int rtw_mp_ant_tx(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 i; ++ u8 input[wrqu->length]; ++ u16 antenna = 0; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ //DBG_871X("%s: input=%s\n", __func__, input); ++ ++ sprintf( extra, "switch Tx antenna to %s", input ); ++ ++ for (i=0; i < strlen(input); i++) ++ { ++ switch(input[i]) ++ { ++ case 'a' : ++ antenna|=ANTENNA_A; ++ break; ++ case 'b': ++ antenna|=ANTENNA_B; ++ break; ++ } ++ } ++ //antenna |= BIT(extra[i]-'a'); ++ //DBG_871X("%s: antenna=0x%x\n", __func__, antenna); ++ padapter->mppriv.antenna_tx = antenna; ++ //DBG_871X("%s:mppriv.antenna_rx=%d\n", __func__, padapter->mppriv.antenna_tx); ++ ++ Hal_SetAntenna(padapter); ++ ++ wrqu->length = strlen(extra) + 1; ++ return 0; ++} ++ ++static int rtw_mp_ant_rx(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 i; ++ u16 antenna = 0; ++ u8 input[wrqu->length]; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ //DBG_871X("%s: input=%s\n", __func__, input); ++ _rtw_memset(extra, 0, wrqu->length); ++ ++ sprintf( extra, "switch Rx antenna to %s", input ); ++ ++ for (i=0; i < strlen(input); i++) { ++ ++ switch( input[i] ) ++ { ++ case 'a' : ++ antenna|=ANTENNA_A; ++ break; ++ case 'b': ++ antenna|=ANTENNA_B; ++ break; ++ } ++ } ++ ++ //DBG_871X("%s: antenna=0x%x\n", __func__, antenna); ++ padapter->mppriv.antenna_rx = antenna; ++ //DBG_871X("%s:mppriv.antenna_rx=%d\n", __func__, padapter->mppriv.antenna_rx); ++ Hal_SetAntenna(padapter); ++ wrqu->length = strlen(extra); ++ ++ return 0; ++} ++ ++static int rtw_mp_ctx(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u32 pkTx = 1, countPkTx = 1, cotuTx = 1, CarrSprTx = 1, scTx = 1, sgleTx = 1, stop = 1; ++ u32 bStartTest = 1; ++ u32 count = 0; ++ struct mp_priv *pmp_priv; ++ struct pkt_attrib *pattrib; ++ ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ pmp_priv = &padapter->mppriv; ++ ++ if (copy_from_user(extra, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ DBG_871X("%s: in=%s\n", __func__, extra); ++ ++ countPkTx = strncmp(extra, "count=", 5); // strncmp TRUE is 0 ++ cotuTx = strncmp(extra, "background", 20); ++ CarrSprTx = strncmp(extra, "background,cs", 20); ++ scTx = strncmp(extra, "background,sc", 20); ++ sgleTx = strncmp(extra, "background,stone", 20); ++ pkTx = strncmp(extra, "background,pkt", 20); ++ stop = strncmp(extra, "stop", 5); ++ sscanf(extra, "count=%d,pkt", &count); ++ ++ //DBG_871X("%s: count=%d countPkTx=%d cotuTx=%d CarrSprTx=%d scTx=%d sgleTx=%d pkTx=%d stop=%d\n", __func__, count, countPkTx, cotuTx, CarrSprTx, pkTx, sgleTx, scTx, stop); ++ _rtw_memset(extra, '\0', sizeof(extra)); ++ ++ if (stop == 0) { ++ bStartTest = 0; // To set Stop ++ pmp_priv->tx.stop = 1; ++ sprintf( extra, "Stop continuous Tx"); ++ } else { ++ bStartTest = 1; ++ if (pmp_priv->mode != MP_ON) { ++ if (pmp_priv->tx.stop != 1) { ++ DBG_871X("%s: MP_MODE != ON %d\n", __func__, pmp_priv->mode); ++ return -EFAULT; ++ } ++ } ++ } ++ ++ if (pkTx == 0 || countPkTx == 0) ++ pmp_priv->mode = MP_PACKET_TX; ++ if (sgleTx == 0) ++ pmp_priv->mode = MP_SINGLE_TONE_TX; ++ if (cotuTx == 0) ++ pmp_priv->mode = MP_CONTINUOUS_TX; ++ if (CarrSprTx == 0) ++ pmp_priv->mode = MP_CARRIER_SUPPRISSION_TX; ++ if (scTx == 0) ++ pmp_priv->mode = MP_SINGLE_CARRIER_TX; ++ ++ switch (pmp_priv->mode) ++ { ++ case MP_PACKET_TX: ++ ++ //DBG_871X("%s:pkTx %d\n", __func__,bStartTest); ++ if (bStartTest == 0) ++ { ++ pmp_priv->tx.stop = 1; ++ pmp_priv->mode = MP_ON; ++ sprintf( extra, "Stop continuous Tx"); ++ } ++ else if (pmp_priv->tx.stop == 1) ++ { ++ sprintf( extra, "Start continuous DA=ffffffffffff len=1500 count=%u,\n",count); ++ //DBG_871X("%s:countPkTx %d\n", __func__,count); ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = count; ++ pmp_priv->tx.payload = 2; ++ pattrib = &pmp_priv->tx.attrib; ++ pattrib->pktlen = 1460; ++ _rtw_memset(pattrib->dst, 0xFF, ETH_ALEN); ++ SetPacketTx(padapter); ++ } ++ else { ++ //DBG_871X("%s: pkTx not stop\n", __func__); ++ return -EFAULT; ++ } ++ wrqu->length = strlen(extra); ++ return 0; ++ ++ case MP_SINGLE_TONE_TX: ++ //DBG_871X("%s: sgleTx %d \n", __func__, bStartTest); ++ if (bStartTest != 0){ ++ sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes."); ++ ++ } ++ Hal_SetSingleToneTx(padapter, (u8)bStartTest); ++ break; ++ ++ case MP_CONTINUOUS_TX: ++ DBG_871X("%s: cotuTx %d\n", __func__, bStartTest); ++ if (bStartTest != 0){ ++ sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes."); ++ } ++ Hal_SetContinuousTx(padapter, (u8)bStartTest); ++ break; ++ ++ case MP_CARRIER_SUPPRISSION_TX: ++ //DBG_871X("%s: CarrSprTx %d\n", __func__, bStartTest); ++ if (bStartTest != 0){ ++ if( pmp_priv->rateidx <= MPT_RATE_11M ) ++ { ++ sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes."); ++ }else ++ sprintf( extra, "Specify carrier suppression but not CCK rate"); ++ } ++ Hal_SetCarrierSuppressionTx(padapter, (u8)bStartTest); ++ break; ++ ++ case MP_SINGLE_CARRIER_TX: ++ //DBG_871X("%s: scTx %d\n", __func__, bStartTest); ++ if (bStartTest != 0){ ++ sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes."); ++ } ++ Hal_SetSingleCarrierTx(padapter, (u8)bStartTest); ++ break; ++ ++ default: ++ //DBG_871X("%s:No Match MP_MODE\n", __func__); ++ sprintf( extra, "Error! Continuous-Tx is not on-going."); ++ return -EFAULT; ++ } ++ ++ if (bStartTest) { ++ struct mp_priv *pmp_priv = &padapter->mppriv; ++ if (pmp_priv->tx.stop == 0) { ++ pmp_priv->tx.stop = 1; ++ //DBG_871X("%s: pkt tx is running...\n", __func__); ++ rtw_msleep_os(5); ++ } ++ pmp_priv->tx.stop = 0; ++ pmp_priv->tx.count = 1; ++ SetPacketTx(padapter); ++ } else { ++ pmp_priv->mode = MP_ON; ++ } ++ ++ wrqu->length = strlen(extra); ++ return 0; ++} ++ ++static int rtw_mp_arx(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 bStartRx=0,bStopRx=0; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ u8 input[wrqu->length]; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ DBG_871X("%s: %s\n", __func__, input); ++ ++ bStartRx = (strncmp(input, "start", 5)==0)?1:0; // strncmp TRUE is 0 ++ bStopRx = (strncmp(input, "stop", 5)==0)?1:0; // strncmp TRUE is 0 ++ SetPacketRx(padapter, bStartRx); ++ ++ if(bStartRx) ++ { ++ sprintf( extra, "start"); ++ wrqu->length = strlen(extra) + 1; ++ } ++ else if(bStopRx) ++ { ++ sprintf( extra, "Received packet OK:%d CRC error:%d",padapter->mppriv.rx_pktcount, ++ padapter->mppriv.rx_crcerrpktcount); ++ wrqu->length = strlen(extra) + 1; ++ } ++ ++ ++ return 0; ++} ++ ++static int rtw_mp_trx_query(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u32 txok,txfail,rxok,rxfail; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ //if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) ++ // return -EFAULT; ++ ++ txok=padapter->mppriv.tx.sended; ++ txfail=0; ++ rxok = padapter->mppriv.rx_pktcount; ++ rxfail = padapter->mppriv.rx_crcerrpktcount; ++ ++ _rtw_memset(extra, '\0', 128); ++ ++ sprintf(extra, "Tx OK:%d, Tx Fail:%d, Rx OK:%d, CRC error:%d ", txok, txfail,rxok,rxfail); ++ ++ wrqu->length=strlen(extra)+1; ++ ++ return 0; ++} ++ ++static int rtw_mp_pwrtrk(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 enable; ++ u32 thermal; ++ s32 ret; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ u8 input[wrqu->length]; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ _rtw_memset(extra, 0, wrqu->length); ++ ++ enable = 1; ++ if (wrqu->length > 1) { // not empty string ++ if (strncmp(input, "stop", 4) == 0) ++ { ++ enable = 0; ++ sprintf(extra, "mp tx power tracking stop"); ++ } ++ else if (sscanf(input, "ther=%d", &thermal)) { ++ ret = Hal_SetThermalMeter(padapter, (u8)thermal); ++ if (ret == _FAIL) return -EPERM; ++ sprintf(extra, "mp tx power tracking start,target value=%d ok ",thermal); ++ }else { ++ return -EINVAL; ++ } ++ } ++ ++ ret = Hal_SetPowerTracking(padapter, enable); ++ if (ret == _FAIL) return -EPERM; ++ ++ wrqu->length = strlen(extra); ++ ++ return 0; ++} ++ ++static int rtw_mp_psd(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ u8 input[wrqu->length]; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ strcpy(extra,input); ++ ++ wrqu->length = mp_query_psd(padapter, extra); ++ ++ return 0; ++} ++ ++static int rtw_mp_thermal(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ u8 val; ++ u16 bwrite=1; ++ #ifdef CONFIG_RTL8192C ++ u16 addr=0x78; ++ #endif ++ #ifdef CONFIG_RTL8192D ++ u16 addr=0xc3; ++ #endif ++ u16 cnt=1; ++ u16 max_available_size=0; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (copy_from_user(extra, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ //DBG_871X("print extra %s \n",extra); ++ ++ bwrite = strncmp(extra, "write", 6); // strncmp TRUE is 0 ++ ++ Hal_GetThermalMeter(padapter, &val); ++ ++ if( bwrite == 0 ) ++ { ++ //DBG_871X("to write val:%d",val); ++ EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE); ++ if( 2 > max_available_size ) ++ { ++ DBG_871X("no available efuse!\n"); ++ return -EFAULT; ++ } ++ if ( rtw_efuse_map_write(padapter, addr, cnt, &val) == _FAIL ) ++ { ++ DBG_871X("rtw_efuse_map_write error \n"); ++ return -EFAULT; ++ } ++ else ++ { ++ sprintf(extra, " efuse write ok :%d", val); ++ } ++ } ++ else ++ { ++ sprintf(extra, "%d", val); ++ } ++ wrqu->length = strlen(extra); ++ ++ return 0; ++} ++ ++static int rtw_mp_reset_stats(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ struct mp_priv *pmp_priv; ++ struct pkt_attrib *pattrib; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ pmp_priv = &padapter->mppriv; ++ ++ pmp_priv->tx.sended = 0; ++ padapter->mppriv.rx_pktcount = 0; ++ padapter->mppriv.rx_crcerrpktcount = 0; ++ ++ return 0; ++} ++ ++static int rtw_mp_dump(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ struct mp_priv *pmp_priv; ++ struct pkt_attrib *pattrib; ++ u32 value; ++ u8 rf_type,path_nums = 0; ++ u32 i,j=1,path; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ pmp_priv = &padapter->mppriv; ++ ++ ++ //if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) ++ // return -EFAULT; ++ ++ if ( strncmp(extra, "all", 4)==0 ) ++ { ++ DBG_871X("\n======= MAC REG =======\n"); ++ for ( i=0x0;i<0x300;i+=4 ) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++ for( i=0x400;i<0x800;i+=4 ) ++ { ++ if(j%4==1) DBG_871X("0x%02x",i); ++ DBG_871X(" 0x%08x ",rtw_read32(padapter,i)); ++ if((j++)%4 == 0) DBG_871X("\n"); ++ } ++ ++ i,j=1; ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ ++ DBG_871X("\n======= RF REG =======\n"); ++ if(( RF_1T2R == rf_type ) ||( RF_1T1R ==rf_type )) ++ path_nums = 1; ++ else ++ path_nums = 2; ++ ++ for(path=0;pathlength]; ++ u32 valxcap; ++ ++ if (copy_from_user(input, wrqu->pointer, wrqu->length)) ++ return -EFAULT; ++ ++ DBG_871X("%s:iwpriv in=%s\n", __func__, input); ++ ++ sscanf(input, "xcap=%d", &valxcap); ++ ++ if (!IS_HARDWARE_TYPE_8192D(padapter)) ++ return 0; ++#ifdef CONFIG_RTL8192D ++ Hal_ProSetCrystalCap( padapter , valxcap ); ++#endif ++ ++ sprintf( extra, "Set xcap=%d",valxcap ); ++ wrqu->length = strlen(extra) + 1; ++ ++return 0; ++ ++} ++ ++ ++/* update Tx AGC offset */ ++static int rtw_mp_antBdiff(struct net_device *dev, ++ struct iw_request_info *info, ++ struct iw_point *wrqu, char *extra) ++{ ++ ++ ++ // MPT_ProSetTxAGCOffset ++ return 0; ++} ++ ++ ++static int rtw_mp_set(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wdata, char *extra) ++{ ++ struct iw_point *wrqu = (struct iw_point *)wdata; ++ u32 subcmd = wrqu->flags; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ if (padapter == NULL) ++ { ++ return -ENETDOWN; ++ } ++ ++ //_rtw_memset(extra, 0x00, IW_PRIV_SIZE_MASK); ++ ++ if (extra == NULL) ++ { ++ wrqu->length = 0; ++ return -EIO; ++ } ++ ++ switch(subcmd) ++ { ++ case WRITE_REG : ++ rtw_mp_write_reg (dev,info,wrqu,extra); ++ break; ++ ++ case WRITE_RF: ++ rtw_mp_write_rf (dev,info,wrqu,extra); ++ break; ++ ++ case MP_START: ++ DBG_871X("set case mp_start \n"); ++ rtw_mp_start (dev,info,wrqu,extra); ++ break; ++ ++ case MP_STOP: ++ DBG_871X("set case mp_stop \n"); ++ rtw_mp_stop (dev,info,wrqu,extra); ++ break; ++ ++ case MP_BANDWIDTH: ++ DBG_871X("set case mp_bandwidth \n"); ++ rtw_mp_bandwidth (dev,info,wrqu,extra); ++ break; ++ ++ case MP_RESET_STATS: ++ DBG_871X("set case MP_RESET_STATS \n"); ++ rtw_mp_reset_stats (dev,info,wrqu,extra); ++ break; ++ ++ case EFUSE_SET: ++ DBG_871X("efuse set \n"); ++ rtw_mp_efuse_set (dev,info,wdata,extra); ++ break; ++ ++ } ++ ++ ++ return 0; ++} ++ ++ ++static int rtw_mp_get(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wdata, char *extra) ++{ ++ struct iw_point *wrqu = (struct iw_point *)wdata; ++ u32 subcmd = wrqu->flags; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ //DBG_871X("in mp_get extra= %s \n",extra); ++ ++ if (padapter == NULL) ++ { ++ return -ENETDOWN; ++ } ++ if (extra == NULL) ++ { ++ wrqu->length = 0; ++ return -EIO; ++ } ++ ++ switch(subcmd) ++ { ++ case MP_PHYPARA: ++ DBG_871X("mp_get MP_PHYPARA \n"); ++ rtw_mp_phypara(dev,info,wrqu,extra); ++ break; ++ ++ case MP_CHANNEL: ++ DBG_871X("set case mp_channel \n"); ++ rtw_mp_channel (dev,info,wrqu,extra); ++ break; ++ ++ case READ_REG: ++ DBG_871X("mp_get READ_REG \n"); ++ rtw_mp_read_reg (dev,info,wrqu,extra); ++ break; ++ case READ_RF: ++ DBG_871X("mp_get READ_RF \n"); ++ rtw_mp_read_rf (dev,info,wrqu,extra); ++ break; ++ ++ case MP_RATE: ++ DBG_871X("set case mp_rate \n"); ++ rtw_mp_rate (dev,info,wrqu,extra); ++ break; ++ ++ case MP_TXPOWER: ++ DBG_871X("set case MP_TXPOWER \n"); ++ rtw_mp_txpower (dev,info,wrqu,extra); ++ break; ++ ++ case MP_ANT_TX: ++ DBG_871X("set case MP_ANT_TX \n"); ++ rtw_mp_ant_tx (dev,info,wrqu,extra); ++ break; ++ ++ case MP_ANT_RX: ++ DBG_871X("set case MP_ANT_RX \n"); ++ rtw_mp_ant_rx (dev,info,wrqu,extra); ++ break; ++ ++ case MP_QUERY: ++ DBG_871X("mp_get mp_query MP_QUERY \n"); ++ rtw_mp_trx_query(dev,info,wrqu,extra); ++ break; ++ ++ case MP_CTX: ++ DBG_871X("set case MP_CTX \n"); ++ rtw_mp_ctx (dev,info,wrqu,extra); ++ break; ++ ++ case MP_ARX: ++ DBG_871X("set case MP_ARX \n"); ++ rtw_mp_arx (dev,info,wrqu,extra); ++ break; ++ ++ case EFUSE_GET: ++ DBG_871X("efuse get EFUSE_GET \n"); ++ rtw_mp_efuse_get(dev,info,wdata,extra); ++ break; ++ ++ case MP_DUMP: ++ DBG_871X("set case MP_DUMP \n"); ++ rtw_mp_dump (dev,info,wrqu,extra); ++ break; ++ case MP_PSD: ++ DBG_871X("set case MP_PSD \n"); ++ rtw_mp_psd (dev,info,wrqu,extra); ++ break; ++ ++ case MP_THER: ++ DBG_871X("set case MP_THER \n"); ++ rtw_mp_thermal (dev,info,wrqu,extra); ++ break; ++ ++ case MP_PWRTRK: ++ DBG_871X("set case MP_PWRTRK \n"); ++ rtw_mp_pwrtrk (dev,info,wrqu,extra); ++ break; ++ } ++ ++return 0; ++} ++ ++#endif //#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT) ++ ++static int rtw_wfd_tdls_enable(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ if ( extra[ 0 ] == '0' ) ++ { ++ padapter->wdinfo.wfd_tdls_enable = 0; ++ } ++ else ++ { ++ padapter->wdinfo.wfd_tdls_enable = 1; ++ } ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_weaksec(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ u8 i, j; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ DBG_871X( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ if ( extra[ 0 ] == '0' ) ++ { ++ padapter->wdinfo.wfd_tdls_weaksec = 0; ++ } ++ else ++ { ++ padapter->wdinfo.wfd_tdls_weaksec = 1; ++ } ++#endif ++ ++ return ret; ++} ++ ++ ++static int rtw_tdls_enable(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ _irqL irqL; ++ _list *plist, *phead; ++ s32 index; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ u8 tdls_sta[NUM_STA][ETH_ALEN]; ++ u8 empty_hwaddr[ETH_ALEN] = { 0x00 }; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ _rtw_memset(tdls_sta, 0x00, sizeof(tdls_sta)); ++ ++ if ( extra[ 0 ] == '0' ) ++ { ++ ptdlsinfo->enable = 0; ++ ++ if(pstapriv->asoc_sta_count==1) ++ return ret; ++ ++ _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ for(index=0; index< NUM_STA; index++) ++ { ++ phead = &(pstapriv->sta_hash[index]); ++ plist = get_next(phead); ++ ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) ++ { ++ psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list); ++ ++ plist = get_next(plist); ++ ++ if(psta->tdls_sta_state != TDLS_STATE_NONE) ++ { ++ _rtw_memcpy(tdls_sta[index], psta->hwaddr, ETH_ALEN); ++ } ++ } ++ } ++ _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL); ++ ++ for(index=0; index< NUM_STA; index++) ++ { ++ if( !_rtw_memcmp(tdls_sta[index], empty_hwaddr, ETH_ALEN) ) ++ { ++ printk("issue tear down to "MAC_FMT"\n", MAC_ARG(tdls_sta[index])); ++ issue_tdls_teardown(padapter, tdls_sta[index]); ++ } ++ } ++ rtw_tdls_cmd(padapter, myid(&(padapter->eeprompriv)), TDLS_RS_RCR); ++ rtw_reset_tdls_info(padapter); ++ } ++ else if ( extra[ 0 ] == '1' ) ++ { ++ ptdlsinfo->enable = 1; ++ } ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_setup(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ u8 i, j; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 mac_addr[ETH_ALEN]; ++ ++#ifdef CONFIG_WFD ++ struct wifidirect_info *pwdinfo= &(padapter->wdinfo); ++#endif // CONFIG_WFD ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++#ifdef CONFIG_WFD ++ if ( _AES_ != padapter->securitypriv.dot11PrivacyAlgrthm ) ++ { ++ // Weak Security situation with AP. ++ if ( 0 == pwdinfo->wfd_tdls_weaksec ) ++ { ++ // Can't send the tdls setup request out!! ++ DBG_871X( "[%s] Current link is not AES, SKIP sending the tdls setup request!!\n", __FUNCTION__ ); ++ } ++ else ++ { ++ issue_tdls_setup_req(padapter, mac_addr); ++ } ++ } ++ else ++#endif // CONFIG_WFD ++ { ++ issue_tdls_setup_req(padapter, mac_addr); ++ } ++#endif ++ ++ return ret; ++} ++ ++static int rtw_tdls_teardown(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ u8 i,j; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct sta_info *ptdls_sta = NULL; ++ u8 mac_addr[ETH_ALEN]; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++ ptdls_sta = rtw_get_stainfo( &(padapter->stapriv), mac_addr); ++ ++ if(ptdls_sta != NULL) ++ { ++ ptdls_sta->stat_code = _RSON_TDLS_TEAR_UN_RSN_; ++ issue_tdls_teardown(padapter, mac_addr); ++ } ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_discovery(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ issue_tdls_dis_req(padapter, NULL); ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_ch_switch(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ u8 i, j, mac_addr[ETH_ALEN]; ++ struct sta_info *ptdls_sta = NULL; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++ ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr); ++ if( ptdls_sta == NULL ) ++ return ret; ++ ptdlsinfo->ch_sensing=1; ++ ++ rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_INIT_CH_SEN); ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_pson(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 i, j, mac_addr[ETH_ALEN]; ++ struct sta_info *ptdls_sta = NULL; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++ ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr); ++ ++ issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 1); ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_psoff(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ u8 i, j, mac_addr[ETH_ALEN]; ++ struct sta_info *ptdls_sta = NULL; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++ ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr); ++ ++ issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0); ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_setip(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info; ++ u8 i=0, j=0, k=0, tag=0, ip[3] = { 0xff }, *ptr = extra; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length - 1 ); ++ ++ ++ while( i < 4 ) ++ { ++ for( j=0; j < 4; j++) ++ { ++ if( *( extra + j + tag ) == '.' || *( extra + j + tag ) == '\0' ) ++ { ++ if( j == 1 ) ++ pwfd_info->ip_address[i]=convert_ip_addr( '0', '0', *(extra+(j-1)+tag)); ++ if( j == 2 ) ++ pwfd_info->ip_address[i]=convert_ip_addr( '0', *(extra+(j-2)+tag), *(extra+(j-1)+tag)); ++ if( j == 3 ) ++ pwfd_info->ip_address[i]=convert_ip_addr( *(extra+(j-3)+tag), *(extra+(j-2)+tag), *(extra+(j-1)+tag)); ++ ++ tag += j + 1; ++ break; ++ } ++ } ++ i++; ++ } ++ ++ printk( "[%s] Set IP = %u.%u.%u.%u \n", __FUNCTION__, ++ ptdlsinfo->wfd_info->ip_address[0], ptdlsinfo->wfd_info->ip_address[1], ++ ptdlsinfo->wfd_info->ip_address[2], ptdlsinfo->wfd_info->ip_address[3] ++ ); ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_getip(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info; ++ ++ printk( "[%s]\n", __FUNCTION__); ++ ++ sprintf( extra, "\n\n%u.%u.%u.%u\n", ++ pwfd_info->peer_ip_address[0], pwfd_info->peer_ip_address[1], ++ pwfd_info->peer_ip_address[2], pwfd_info->peer_ip_address[3] ++ ); ++ ++ printk( "[%s] IP=%u.%u.%u.%u\n", __FUNCTION__, ++ pwfd_info->peer_ip_address[0], pwfd_info->peer_ip_address[1], ++ pwfd_info->peer_ip_address[2], pwfd_info->peer_ip_address[3] ++ ); ++ ++ wrqu->data.length = strlen( extra ); ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls_getport(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info; ++ ++ printk( "[%s]\n", __FUNCTION__); ++ ++ sprintf( extra, "\n\n%d\n", pwfd_info->peer_rtsp_ctrlport ); ++ printk( "[%s] remote port = %d\n", __FUNCTION__, pwfd_info->peer_rtsp_ctrlport ); ++ ++ wrqu->data.length = strlen( extra ); ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++ ++} ++ ++//WFDTDLS, for sigma test ++static int rtw_tdls_dis_result(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info; ++ ++ printk( "[%s]\n", __FUNCTION__); ++ ++ if(ptdlsinfo->dev_discovered == 1 ) ++ { ++ sprintf( extra, "\n\nDis=1\n" ); ++ ptdlsinfo->dev_discovered = 0; ++ } ++ ++ wrqu->data.length = strlen( extra ); ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++ ++} ++ ++//WFDTDLS, for sigma test ++static int rtw_wfd_tdls_status(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++#ifdef CONFIG_WFD ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct tdls_info *ptdlsinfo = &padapter->tdlsinfo; ++ struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info; ++ ++ printk( "[%s]\n", __FUNCTION__); ++ ++ if(ptdlsinfo->setup_state == TDLS_LINKED_STATE ) ++ { ++ sprintf( extra, "\n\nStatus=1\n" ); ++ } ++ else ++ { ++ sprintf( extra, "\n\nStatus=0\n" ); ++ } ++ ++ wrqu->data.length = strlen( extra ); ++ ++#endif //CONFIG_WFD ++#endif //CONFIG_TDLS ++ ++ return ret; ++ ++} ++ ++static int rtw_tdls_ch_switch_off(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ u8 i, j, mac_addr[ETH_ALEN]; ++ struct sta_info *ptdls_sta = NULL; ++ ++ printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1 ); ++ ++ for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){ ++ mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1)); ++ } ++ ++ ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr); ++ ++ ptdls_sta->tdls_sta_state |= TDLS_SW_OFF_STATE; ++/* ++ if((ptdls_sta->tdls_sta_state & TDLS_AT_OFF_CH_STATE) && (ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE)){ ++ pmlmeinfo->tdls_candidate_ch= pmlmeext->cur_channel; ++ issue_tdls_ch_switch_req(padapter, mac_addr); ++ DBG_871X("issue tdls ch switch req back to base channel\n"); ++ } ++*/ ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++static int rtw_tdls(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_TDLS ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ printk( "[%s] extra = %s\n", __FUNCTION__, extra ); ++ // WFD Sigma will use the tdls enable command to let the driver know we want to test the tdls now! ++ if ( _rtw_memcmp( extra, "wfdenable=", 10 ) ) ++ { ++ wrqu->data.length -=10; ++ rtw_wfd_tdls_enable( dev, info, wrqu, &extra[10] ); ++ return ret; ++ } ++ else if ( _rtw_memcmp( extra, "weaksec=", 8 ) ) ++ { ++ wrqu->data.length -=8; ++ rtw_tdls_weaksec( dev, info, wrqu, &extra[8] ); ++ return ret; ++ } ++ else if ( _rtw_memcmp( extra, "tdlsenable=", 11 ) ) ++ { ++ wrqu->data.length -=11; ++ rtw_tdls_enable( dev, info, wrqu, &extra[11] ); ++ return ret; ++ } ++ ++ if( padapter->tdlsinfo.enable == 0 ) ++ { ++ printk("tdls haven't enabled\n"); ++ return 0; ++ } ++ ++ if ( _rtw_memcmp( extra, "setup=", 6 ) ) ++ { ++ wrqu->data.length -=6; ++ rtw_tdls_setup( dev, info, wrqu, &extra[6] ); ++ } ++ else if (_rtw_memcmp( extra, "tear=", 5 ) ) ++ { ++ wrqu->data.length -= 5; ++ rtw_tdls_teardown( dev, info, wrqu, &extra[5] ); ++ } ++ else if (_rtw_memcmp( extra, "dis=", 4 ) ) ++ { ++ wrqu->data.length -= 4; ++ rtw_tdls_discovery( dev, info, wrqu, &extra[4] ); ++ } ++ else if (_rtw_memcmp( extra, "sw=", 3 ) ) ++ { ++ wrqu->data.length -= 3; ++ rtw_tdls_ch_switch( dev, info, wrqu, &extra[3] ); ++ } ++ else if (_rtw_memcmp( extra, "swoff=", 6 ) ) ++ { ++ wrqu->data.length -= 6; ++ rtw_tdls_ch_switch_off( dev, info, wrqu, &extra[6] ); ++ } ++ else if (_rtw_memcmp( extra, "pson=", 5 ) ) ++ { ++ wrqu->data.length -= 5; ++ rtw_tdls_pson( dev, info, wrqu, &extra[5] ); ++ } ++ else if (_rtw_memcmp( extra, "psoff=", 6 ) ) ++ { ++ wrqu->data.length -= 6; ++ rtw_tdls_psoff( dev, info, wrqu, &extra[6] ); ++ } ++#ifdef CONFIG_WFD ++ else if (_rtw_memcmp( extra, "setip=", 6 ) ) ++ { ++ wrqu->data.length -= 6; ++ rtw_tdls_setip( dev, info, wrqu, &extra[6] ); ++ } ++ else if (_rtw_memcmp( extra, "tprobe=", 6 ) ) ++ { ++ issue_tunneled_probe_req((_adapter *)rtw_netdev_priv(dev)); ++ } ++#endif //CONFIG_WFD ++ ++#endif //CONFIG_TDLS ++ ++ return ret; ++} ++ ++ ++static int rtw_tdls_get(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ ++#ifdef CONFIG_WFD ++ ++ DBG_871X( "[%s] extra = %s\n", __FUNCTION__, (char*) wrqu->data.pointer ); ++ ++ if ( _rtw_memcmp( wrqu->data.pointer, "ip", 2 ) ) ++ { ++ rtw_tdls_getip( dev, info, wrqu, extra ); ++ } ++ if ( _rtw_memcmp( wrqu->data.pointer, "port", 4 ) ) ++ { ++ rtw_tdls_getport( dev, info, wrqu, extra ); ++ } ++ ++ //WFDTDLS, for sigma test ++ if ( _rtw_memcmp( wrqu->data.pointer, "dis", 3 ) ) ++ { ++ rtw_tdls_dis_result( dev, info, wrqu, extra ); ++ } ++ if ( _rtw_memcmp( wrqu->data.pointer, "status", 6 ) ) ++ { ++ rtw_wfd_tdls_status( dev, info, wrqu, extra ); ++ } ++ ++#endif //CONFIG_WFD ++ ++ return ret; ++} ++ ++static int rtw_pm_set(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ unsigned mode = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ DBG_871X( "[%s] extra = %s\n", __FUNCTION__, extra ); ++ ++ if ( _rtw_memcmp( extra, "lps=", 4 ) ) ++ { ++ sscanf(extra+4, "%u", &mode); ++ ret = rtw_pm_set_lps(padapter,mode); ++ } ++ else if ( _rtw_memcmp( extra, "ips=", 4 ) ) ++ { ++ sscanf(extra+4, "%u", &mode); ++ ret = rtw_pm_set_ips(padapter,mode); ++ } ++ else{ ++ ret = -EINVAL; ++ } ++ ++ return ret; ++} ++ ++#ifdef CONFIG_WOWLAN ++static int rtw_wowlan_ctrl(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ struct oid_par_priv oid_par; ++ struct wowlan_ioctl_param *poidparam; ++ uint status=0; ++ u16 len; ++ u8 *pparmbuf = NULL, bset; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ struct iw_point *p = &wrqu->data; ++ ++ //DBG_871X("+rtw_wowlan_ctrl\n"); ++ ++ //mutex_lock(&ioctl_mutex); ++ ++ if ((!p->length) || (!p->pointer)) { ++ ret = -EINVAL; ++ goto _rtw_wowlan_ctrl_exit; ++ } ++ ++ pparmbuf = NULL; ++ bset = (u8)(p->flags & 0xFFFF); ++ len = p->length; ++ pparmbuf = (u8*)rtw_malloc(len); ++ if (pparmbuf == NULL){ ++ ret = -ENOMEM; ++ goto _rtw_wowlan_ctrl_exit; ++ } ++ ++ if (copy_from_user(pparmbuf, p->pointer, len)) { ++ ret = -EFAULT; ++ goto _rtw_wowlan_ctrl_exit_free; ++ } ++ poidparam = (struct wowlan_ioctl_param *)pparmbuf; ++ ++ if(padapter->pwrctrlpriv.bSupportRemoteWakeup==_FALSE){ ++ ret = -EPERM; ++ DBG_871X("+rtw_wowlan_ctrl: Device didn't support the remote wakeup!!\n"); ++ goto _rtw_wowlan_ctrl_exit_free; ++ } ++ rtw_hal_set_hwreg(padapter,HW_VAR_WOWLAN,(u8 *)poidparam); ++ ++ DBG_871X("rtw_wowlan_ctrl: subcode [%d], len[%d], buffer_len[%d]\r\n", ++ poidparam->subcode, poidparam->len, len); ++ ++ if (copy_to_user(p->pointer, pparmbuf, len)) { ++ ret = -EFAULT; ++ } ++ ++ ++_rtw_wowlan_ctrl_exit_free: ++ //DBG_871X("-rtw_wowlan_ctrl( subcode = %d)\n", poidparam->subcode); ++ rtw_mfree(pparmbuf, len); ++_rtw_wowlan_ctrl_exit: ++ ++ ++ return ret; ++} ++#endif //CONFIG_WOWLAN ++ ++#ifdef CONFIG_INTEL_WIDI ++static int rtw_widi_set(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ process_intel_widi_cmd(padapter, extra); ++ ++ return ret; ++} ++ ++static int rtw_widi_set_probe_request(struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ int ret = 0; ++ u8 *pbuf = NULL; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ ++ pbuf = rtw_malloc(sizeof(l2_msg_t)); ++ if(pbuf) ++ { ++ copy_from_user(pbuf, wrqu->data.pointer, wrqu->data.length); ++ //_rtw_memcpy(pbuf, wrqu->data.pointer, wrqu->data.length); ++ ++ if( wrqu->data.flags == 0 ) ++ intel_widi_wk_cmd(padapter, INTEL_WIDI_ISSUE_PROB_WK, pbuf); ++ else if( wrqu->data.flags == 1 ) ++ rtw_set_wfd_rds_sink_info( padapter, (l2_msg_t *)pbuf ); ++ } ++ return ret; ++} ++ ++#endif // CONFIG_INTEL_WIDI ++ ++#ifdef RTL8723A_SDIO_LOOPBACK ++#include ++ ++static s32 initLoopback(PADAPTER padapter) ++{ ++ PLOOPBACKDATA ploopback; ++ ++ ++ if (padapter->ploopback == NULL) { ++ ploopback = (PLOOPBACKDATA)rtw_zmalloc(sizeof(LOOPBACKDATA)); ++ if (ploopback == NULL) return -ENOMEM; ++ ++ _rtw_init_sema(&ploopback->sema, 0); ++ ++ ploopback->bstop = _TRUE; ++ ploopback->cnt = 0; ++ ploopback->size = 300; ++ _rtw_memset(ploopback->msg, 0, sizeof(ploopback->msg)); ++ ++ padapter->ploopback = ploopback; ++ } ++ ++ return 0; ++} ++ ++static void freeLoopback(PADAPTER padapter) ++{ ++ PLOOPBACKDATA ploopback; ++ ++ ++ ploopback = padapter->ploopback; ++ if (ploopback) { ++ rtw_mfree((u8*)ploopback, sizeof(LOOPBACKDATA)); ++ padapter->ploopback = NULL; ++ } ++} ++ ++static s32 initpseudoadhoc(PADAPTER padapter) ++{ ++ NDIS_802_11_NETWORK_INFRASTRUCTURE networkType; ++ s32 err; ++ _irqL irqL; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ _queue *queue = &pmlmepriv->scanned_queue; ++ ++ networkType = Ndis802_11IBSS; ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ _enter_critical_bh(&queue->lock, &irqL); ++ err = rtw_set_802_11_infrastructure_mode(padapter, networkType); ++ _exit_critical_bh(&queue->lock, &irqL); ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ if (err == _FALSE) return _FAIL; ++ ++ err = rtw_setopmode_cmd(padapter, networkType); ++ if (err == _FAIL) return _FAIL; ++ ++ return _SUCCESS; ++} ++ ++static s32 createpseudoadhoc(PADAPTER padapter) ++{ ++ NDIS_802_11_AUTHENTICATION_MODE authmode; ++ struct mlme_priv *pmlmepriv; ++ NDIS_802_11_SSID *passoc_ssid; ++ WLAN_BSSID_EX *pdev_network; ++ u8 *pibss; ++ u8 ssid[] = "pseduo_ad-hoc"; ++ s32 err; ++ _irqL irqL; ++ ++ ++ pmlmepriv = &padapter->mlmepriv; ++ ++ authmode = Ndis802_11AuthModeOpen; ++ err = rtw_set_802_11_authentication_mode(padapter, authmode); ++ if (err == _FALSE) return _FAIL; ++ ++ passoc_ssid = &pmlmepriv->assoc_ssid; ++ _rtw_memset(passoc_ssid, 0, sizeof(NDIS_802_11_SSID)); ++ passoc_ssid->SsidLength = sizeof(ssid) - 1; ++ _rtw_memcpy(passoc_ssid->Ssid, ssid, passoc_ssid->SsidLength); ++ ++ pdev_network = &padapter->registrypriv.dev_network; ++ pibss = padapter->registrypriv.dev_network.MacAddress; ++ _rtw_memcpy(&pdev_network->Ssid, passoc_ssid, sizeof(NDIS_802_11_SSID)); ++ ++ rtw_update_registrypriv_dev_network(padapter); ++ rtw_generate_random_ibss(pibss); ++ ++ _enter_critical_bh(&pmlmepriv->lock, &irqL); ++ pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE; ++ _exit_critical_bh(&pmlmepriv->lock, &irqL); ++ ++#if 0 ++ err = rtw_createbss_cmd(padapter); ++ if (err == _FAIL) return _FAIL; ++#else ++{ ++ struct wlan_network *pcur_network; ++ struct sta_info *psta; ++ ++ //3 create a new psta ++ pcur_network = &pmlmepriv->cur_network; ++ ++ //clear psta in the cur_network, if any ++ psta = rtw_get_stainfo(&padapter->stapriv, pcur_network->network.MacAddress); ++ if (psta) rtw_free_stainfo(padapter, psta); ++ ++ psta = rtw_alloc_stainfo(&padapter->stapriv, pibss); ++ if (psta == NULL) return _FAIL; ++ ++ //3 join psudo AdHoc ++ pcur_network->join_res = 1; ++ pcur_network->aid = psta->aid = 1; ++ _rtw_memcpy(&pcur_network->network, pdev_network, get_WLAN_BSSID_EX_sz(pdev_network)); ++ ++ // set msr to WIFI_FW_ADHOC_STATE ++#if 0 ++ Set_NETYPE0_MSR(padapter, WIFI_FW_ADHOC_STATE); ++#else ++ { ++ u8 val8; ++ ++ val8 = rtw_read8(padapter, MSR); ++ val8 &= 0xFC; // clear NETYPE0 ++ val8 |= WIFI_FW_ADHOC_STATE & 0x3; ++ rtw_write8(padapter, MSR, val8); ++ } ++#endif ++} ++#endif ++ ++ return _SUCCESS; ++} ++ ++extern void rtl8723a_cal_txdesc_chksum(struct tx_desc *ptxdesc); ++extern void rtl8723a_fill_default_txdesc(struct xmit_frame *pxmitframe, u8 *pbuf); ++ ++static struct xmit_frame* createloopbackpkt(PADAPTER padapter, u32 size) ++{ ++ struct xmit_priv *pxmitpriv; ++ struct xmit_frame *pframe; ++ struct xmit_buf *pxmitbuf; ++ struct pkt_attrib *pattrib; ++ struct tx_desc *desc; ++ u8 *pkt_start, *pkt_end, *ptr; ++ struct rtw_ieee80211_hdr *hdr; ++ s32 bmcast; ++ _irqL irqL; ++ ++ ++ if ((TXDESC_SIZE + WLANHDR_OFFSET + size) > MAX_XMITBUF_SZ) return NULL; ++ ++ pxmitpriv = &padapter->xmitpriv; ++ pframe = NULL; ++ ++ //2 1. allocate xmit frame ++ pframe = rtw_alloc_xmitframe(pxmitpriv); ++ if (pframe == NULL) return NULL; ++ pframe->padapter = padapter; ++ ++ //2 2. allocate xmit buffer ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv); ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++ if (pxmitbuf == NULL) { ++ rtw_free_xmitframe(pxmitpriv, pframe); ++ return NULL; ++ } ++ ++ pframe->pxmitbuf = pxmitbuf; ++ pframe->buf_addr = pxmitbuf->pbuf; ++ pxmitbuf->priv_data = pframe; ++ ++ //2 3. update_attrib() ++ pattrib = &pframe->attrib; ++ ++ // init xmitframe attribute ++ _rtw_memset(pattrib, 0, sizeof(struct pkt_attrib)); ++ ++ pattrib->ether_type = 0x8723; ++ _rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN); ++ _rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN); ++ _rtw_memset(pattrib->dst, 0xFF, ETH_ALEN); ++ _rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN); ++// pattrib->pctrl = 0; ++// pattrib->dhcp_pkt = 0; ++// pattrib->pktlen = 0; ++ pattrib->ack_policy = 0; ++// pattrib->pkt_hdrlen = ETH_HLEN; ++ pattrib->hdrlen = WLAN_HDR_A3_LEN; ++ pattrib->subtype = WIFI_DATA; ++ pattrib->priority = 0; ++ pattrib->qsel = pattrib->priority; ++// do_queue_select(padapter, pattrib); ++ pattrib->nr_frags = 1; ++ pattrib->encrypt = 0; ++ pattrib->bswenc = _FALSE; ++ pattrib->qos_en = _FALSE; ++ ++ bmcast = IS_MCAST(pattrib->ra); ++ if (bmcast) { ++ pattrib->mac_id = 1; ++ pattrib->psta = rtw_get_bcmc_stainfo(padapter); ++ } else { ++ pattrib->mac_id = 0; ++ pattrib->psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv)); ++ } ++ ++ pattrib->pktlen = size; ++ pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->pktlen; ++ ++ //2 4. fill TX descriptor ++ desc = (struct tx_desc*)pframe->buf_addr; ++ _rtw_memset(desc, 0, TXDESC_SIZE); ++ ++ rtl8723a_fill_default_txdesc(pframe, (u8*)desc); ++ ++ // Hw set sequence number ++ ((PTXDESC)desc)->hwseq_en = 0; // HWSEQ_EN, 0:disable, 1:enable ++// ((PTXDESC)desc)->hwseq_sel = 0; // HWSEQ_SEL ++ ++ ((PTXDESC)desc)->disdatafb = 1; ++ ++ // convert to little endian ++ desc->txdw0 = cpu_to_le32(desc->txdw0); ++ desc->txdw1 = cpu_to_le32(desc->txdw1); ++ desc->txdw2 = cpu_to_le32(desc->txdw2); ++ desc->txdw3 = cpu_to_le32(desc->txdw3); ++ desc->txdw4 = cpu_to_le32(desc->txdw4); ++ desc->txdw5 = cpu_to_le32(desc->txdw5); ++ desc->txdw6 = cpu_to_le32(desc->txdw6); ++ desc->txdw7 = cpu_to_le32(desc->txdw7); ++#ifdef CONFIG_PCI_HCI ++ desc->txdw8 = cpu_to_le32(desc->txdw8); ++ desc->txdw9 = cpu_to_le32(desc->txdw9); ++ desc->txdw10 = cpu_to_le32(desc->txdw10); ++ desc->txdw11 = cpu_to_le32(desc->txdw11); ++ desc->txdw12 = cpu_to_le32(desc->txdw12); ++ desc->txdw13 = cpu_to_le32(desc->txdw13); ++ desc->txdw14 = cpu_to_le32(desc->txdw14); ++ desc->txdw15 = cpu_to_le32(desc->txdw15); ++#endif ++ ++ rtl8723a_cal_txdesc_chksum(desc); ++ ++ //2 5. coalesce ++ pkt_start = pframe->buf_addr + TXDESC_SIZE; ++ pkt_end = pkt_start + pattrib->last_txcmdsz; ++ ++ //3 5.1. make wlan header, make_wlanhdr() ++ hdr = (struct rtw_ieee80211_hdr *)pkt_start; ++ SetFrameSubType(&hdr->frame_ctl, pattrib->subtype); ++ _rtw_memcpy(hdr->addr1, pattrib->dst, ETH_ALEN); // DA ++ _rtw_memcpy(hdr->addr2, pattrib->src, ETH_ALEN); // SA ++ _rtw_memcpy(hdr->addr3, get_bssid(&padapter->mlmepriv), ETH_ALEN); // RA, BSSID ++ ++ //3 5.2. make payload ++ ptr = pkt_start + pattrib->hdrlen; ++ get_random_bytes(ptr, pkt_end - ptr); ++ ++ pxmitbuf->len = TXDESC_SIZE + pattrib->last_txcmdsz; ++ pxmitbuf->ptail += pxmitbuf->len; ++ ++ return pframe; ++} ++ ++static void freeloopbackpkt(PADAPTER padapter, struct xmit_frame *pframe) ++{ ++ struct xmit_priv *pxmitpriv; ++ struct xmit_buf *pxmitbuf; ++ ++ ++ pxmitpriv = &padapter->xmitpriv; ++ pxmitbuf = pframe->pxmitbuf; ++ ++ rtw_free_xmitframe(pxmitpriv, pframe); ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++} ++ ++extern u32 get_txfifo_hwaddr(struct xmit_frame *pxmitframe); ++ ++thread_return lbk_thread(thread_context context) ++{ ++ s32 err; ++ PADAPTER padapter; ++ PLOOPBACKDATA ploopback; ++ struct xmit_frame *pxmitframe; ++ u32 cnt, ok, fail, i, headerlen; ++ u32 pktsize; ++ u32 ff_hwaddr; ++ ++ ++ padapter = (PADAPTER)context; ++ ploopback = padapter->ploopback; ++ if (ploopback == NULL) return -1; ++ cnt = 0; ++ ok = 0; ++ fail = 0; ++ ++ daemonize("%s", "RTW_LBK_THREAD"); ++ allow_signal(SIGTERM); ++ ++ do { ++ if (ploopback->size == 0) { ++ get_random_bytes(&pktsize, 4); ++ pktsize = (pktsize % 1535) + 1; // 1~1535 ++ } else ++ pktsize = ploopback->size; ++ ++ pxmitframe = createloopbackpkt(padapter, pktsize); ++ if (pxmitframe == NULL) { ++ sprintf(ploopback->msg, "loopback FAIL! 3. create Packet FAIL!"); ++ break; ++ } ++ ++ ploopback->txsize = TXDESC_SIZE + pxmitframe->attrib.last_txcmdsz; ++ _rtw_memcpy(ploopback->txbuf, pxmitframe->buf_addr, ploopback->txsize); ++ ++ ff_hwaddr = get_txfifo_hwaddr(pxmitframe); ++ rtw_write_port(padapter, ff_hwaddr, ploopback->txsize, ploopback->txbuf); ++ cnt++; ++ ++ _rtw_down_sema(&ploopback->sema); ++ ++{ ++ PHAL_DATA_TYPE phal; ++ struct recv_stat *prxstat; ++ struct recv_stat report; ++ PRXREPORT prxreport; ++ u32 drvinfosize; ++ u32 rxpktsize; ++ u8 fcssize; ++ ++ prxstat = (struct recv_stat*)ploopback->rxbuf; ++ report.rxdw0 = le32_to_cpu(prxstat->rxdw0); ++ report.rxdw1 = le32_to_cpu(prxstat->rxdw1); ++ report.rxdw2 = le32_to_cpu(prxstat->rxdw2); ++ report.rxdw3 = le32_to_cpu(prxstat->rxdw3); ++ report.rxdw4 = le32_to_cpu(prxstat->rxdw4); ++ report.rxdw5 = le32_to_cpu(prxstat->rxdw5); ++ ++ prxreport = (PRXREPORT)&report; ++ drvinfosize = prxreport->drvinfosize << 3; ++ rxpktsize = prxreport->pktlen; ++ ++ phal = GET_HAL_DATA(padapter); ++ if (phal->ReceiveConfig & RCR_APPFCS) fcssize = IEEE80211_FCS_LEN; ++ else fcssize = 0; ++ ++ if ((ploopback->txsize - TXDESC_SIZE) != (rxpktsize - fcssize)) { ++ printk("%s: cnt=%d, size not match! tx=%d rx=%d\n", ++ __func__, i, ploopback->txsize - TXDESC_SIZE, ++ rxpktsize - fcssize); ++ err = _FALSE; ++ } else { ++ err = _rtw_memcmp(ploopback->txbuf + TXDESC_SIZE,\ ++ ploopback->rxbuf + RXDESC_SIZE + drvinfosize,\ ++ ploopback->txsize - TXDESC_SIZE); ++ } ++} ++ ++ if (err == _TRUE) ++ ok++; ++ else ++ fail++; ++ ++ ploopback->txsize = 0; ++ _rtw_memset(ploopback->txbuf, 0, 0x8000); ++ ploopback->rxsize = 0; ++ _rtw_memset(ploopback->rxbuf, 0, 0x8000); ++ ++ freeloopbackpkt(padapter, pxmitframe); ++ pxmitframe = NULL; ++ ++ if (signal_pending(current)) { ++ flush_signals(current); ++ } ++ ++ if ((ploopback->bstop == _TRUE) || ++ ((ploopback->cnt != 0) && (ploopback->cnt == cnt))) ++ { ++ u32 ok_rate, fail_rate; ++ ok_rate = (ok*100)/cnt; ++ fail_rate = (fail*100)/cnt; ++ sprintf(ploopback->msg, "loopback result: ok=%d%%(%d/%d),error=%d%%(%d/%d)", ok_rate, ok, cnt, fail_rate, fail, cnt); ++ break; ++ } ++ } while (1); ++ ++ ploopback->bstop = _TRUE; ++ ++ thread_exit(); ++} ++ ++static void loopbackTest(PADAPTER padapter, u32 cnt, u32 size, u8* pmsg) ++{ ++ PLOOPBACKDATA ploopback; ++ u32 len; ++ s32 err; ++ ++ ++ ploopback = padapter->ploopback; ++ ++ if (ploopback) ++ { ++ ploopback->bstop = _TRUE; ++ len = 0; ++ do { ++ len = strlen(ploopback->msg); ++ if (len) break; ++ rtw_msleep_os(1); ++ } while (1); ++ _rtw_memcpy(pmsg, ploopback->msg, len+1); ++ freeLoopback(padapter); ++ return; ++ } ++ ++ // create pseudo ad-hoc connection ++ err = initpseudoadhoc(padapter); ++ if (err == _FAIL) { ++ sprintf(pmsg, "loopback FAIL! 1.1 init ad-hoc FAIL!"); ++ return; ++ } ++ ++ err = createpseudoadhoc(padapter); ++ if (err == _FAIL) { ++ sprintf(pmsg, "loopback FAIL! 1.2 create ad-hoc master FAIL!"); ++ return; ++ } ++ ++ err = initLoopback(padapter); ++ if (err) { ++ sprintf(pmsg, "loopback FAIL! 2. init FAIL! error code=%d", err); ++ return; ++ } ++ ++ ploopback = padapter->ploopback; ++ ++ ploopback->bstop = _FALSE; ++ ploopback->cnt = cnt; ++ ploopback->size = size; ++ ploopback->lbkthread = kthread_run(lbk_thread, padapter, "RTW_LBK_THREAD"); ++ if (IS_ERR(padapter->lbkthread)) ++ { ++ freeLoopback(padapter); ++ sprintf(pmsg, "loopback start FAIL! cnt=%d", cnt); ++ return; ++ } ++ ++ sprintf(pmsg, "loopback start! cnt=%d", cnt); ++} ++ ++extern u8 _InitPowerOn(PADAPTER padapter); ++extern s32 rtl8723a_FirmwareDownload(PADAPTER padapter); ++ ++static int rtw_test( ++ struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ u32 len; ++ u8 *pbuf, *pch; ++ char *ptmp; ++ u8 *delim = ","; ++ PADAPTER padapter = rtw_netdev_priv(dev); ++ ++ ++ printk("+%s\n", __func__); ++ len = wrqu->data.length; ++ ++ pbuf = (u8*)rtw_zmalloc(len); ++ if (pbuf == NULL) { ++ printk("%s: no memory!\n", __func__); ++ return -ENOMEM; ++ } ++ ++ if (copy_from_user(pbuf, wrqu->data.pointer, len)) { ++ rtw_mfree(pbuf, len); ++ printk("%s: copy from user fail!\n", __func__); ++ return -EFAULT; ++ } ++ printk("%s: string=\"%s\"\n", __func__, pbuf); ++ ++ ptmp = (char*)pbuf; ++ pch = strsep(&ptmp, delim); ++ if ((pch == NULL) || (strlen(pch) == 0)) { ++ rtw_mfree(pbuf, len); ++ printk("%s: parameter error(level 1)!\n", __func__); ++ return -EFAULT; ++ } ++ ++#ifdef RTL8723A_SDIO_LOOPBACK ++ if (strcmp(pch, "loopback") == 0) ++ { ++ s32 cnt = 0; ++ u32 size = 64; ++ ++ pch = strsep(&ptmp, delim); ++ if ((pch == NULL) || (strlen(pch) == 0)) { ++ rtw_mfree(pbuf, len); ++ printk("%s: parameter error(level 2)!\n", __func__); ++ return -EFAULT; ++ } ++ ++ sscanf(pch, "%d", &cnt); ++ printk("%s: loopback cnt=%d\n", __func__, cnt); ++ ++ pch = strsep(&ptmp, delim); ++ if ((pch == NULL) || (strlen(pch) == 0)) { ++ rtw_mfree(pbuf, len); ++ printk("%s: parameter error(level 2)!\n", __func__); ++ return -EFAULT; ++ } ++ ++ sscanf(pch, "%d", &size); ++ printk("%s: loopback size=%d\n", __func__, size); ++ ++ loopbackTest(padapter, cnt, size, extra); ++ wrqu->data.length = strlen(extra) + 1; ++ ++ rtw_mfree(pbuf, len); ++ return 0; ++ } ++#endif ++ ++ if (strcmp(pch, "poweron") == 0) ++ { ++ s32 ret; ++ ++ ret = _InitPowerOn(padapter); ++ if (_FAIL == ret) ++ printk("%s: power on FAIL!\n", __func__); ++ else ++ printk("%s: power on OK.\n", __func__); ++ ++ rtw_mfree(pbuf, len); ++ return 0; ++ } ++ ++ if (strcmp(pch, "dlfw") == 0) ++ { ++ s32 ret; ++ ++ ret = rtl8723a_FirmwareDownload(padapter); ++ if (_FAIL == ret) ++ printk("%s: download FW FAIL!\n", __func__); ++ else ++ printk("%s: download FW OK.\n", __func__); ++ ++ rtw_mfree(pbuf, len); ++ return 0; ++ } ++ ++ rtw_mfree(pbuf, len); ++ return 0; ++} ++#else ++static int rtw_test( ++ struct net_device *dev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, char *extra) ++{ ++ printk("%s\n", __func__); ++ return 0; ++} ++#endif //RTL8723A_SDIO_LOOPBACK ++ ++#include ++int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ struct iwreq *wrq = (struct iwreq *)rq; ++ int ret=0; ++ ++ switch (cmd) ++ { ++ case RTL_IOCTL_WPA_SUPPLICANT: ++ ret = wpa_supplicant_ioctl(dev, &wrq->u.data); ++ break; ++#ifdef CONFIG_AP_MODE ++ case RTL_IOCTL_HOSTAPD: ++ ret = rtw_hostapd_ioctl(dev, &wrq->u.data); ++ break; ++#ifdef CONFIG_NO_WIRELESS_HANDLERS ++ case SIOCSIWMODE: ++ ret = rtw_wx_set_mode(dev, NULL, &wrq->u, NULL); ++ break; ++#endif ++#endif ++ case (SIOCDEVPRIVATE+1): ++ ret = rtw_android_priv_cmd(dev, rq, cmd); ++ break; ++ default: ++ ret = -EOPNOTSUPP; ++ break; ++ } ++ ++ return ret; ++} ++ ++static iw_handler rtw_handlers[] = ++{ ++ NULL, /* SIOCSIWCOMMIT */ ++ rtw_wx_get_name, /* SIOCGIWNAME */ ++ dummy, /* SIOCSIWNWID */ ++ dummy, /* SIOCGIWNWID */ ++ rtw_wx_set_freq, /* SIOCSIWFREQ */ ++ rtw_wx_get_freq, /* SIOCGIWFREQ */ ++ rtw_wx_set_mode, /* SIOCSIWMODE */ ++ rtw_wx_get_mode, /* SIOCGIWMODE */ ++ dummy, /* SIOCSIWSENS */ ++ rtw_wx_get_sens, /* SIOCGIWSENS */ ++ NULL, /* SIOCSIWRANGE */ ++ rtw_wx_get_range, /* SIOCGIWRANGE */ ++ rtw_wx_set_priv, /* SIOCSIWPRIV */ ++ NULL, /* SIOCGIWPRIV */ ++ NULL, /* SIOCSIWSTATS */ ++ NULL, /* SIOCGIWSTATS */ ++ dummy, /* SIOCSIWSPY */ ++ dummy, /* SIOCGIWSPY */ ++ NULL, /* SIOCGIWTHRSPY */ ++ NULL, /* SIOCWIWTHRSPY */ ++ rtw_wx_set_wap, /* SIOCSIWAP */ ++ rtw_wx_get_wap, /* SIOCGIWAP */ ++ rtw_wx_set_mlme, /* request MLME operation; uses struct iw_mlme */ ++ dummy, /* SIOCGIWAPLIST -- depricated */ ++ rtw_wx_set_scan, /* SIOCSIWSCAN */ ++ rtw_wx_get_scan, /* SIOCGIWSCAN */ ++ rtw_wx_set_essid, /* SIOCSIWESSID */ ++ rtw_wx_get_essid, /* SIOCGIWESSID */ ++ dummy, /* SIOCSIWNICKN */ ++ rtw_wx_get_nick, /* SIOCGIWNICKN */ ++ NULL, /* -- hole -- */ ++ NULL, /* -- hole -- */ ++ rtw_wx_set_rate, /* SIOCSIWRATE */ ++ rtw_wx_get_rate, /* SIOCGIWRATE */ ++ rtw_wx_set_rts, /* SIOCSIWRTS */ ++ rtw_wx_get_rts, /* SIOCGIWRTS */ ++ rtw_wx_set_frag, /* SIOCSIWFRAG */ ++ rtw_wx_get_frag, /* SIOCGIWFRAG */ ++ dummy, /* SIOCSIWTXPOW */ ++ dummy, /* SIOCGIWTXPOW */ ++ dummy, /* SIOCSIWRETRY */ ++ rtw_wx_get_retry, /* SIOCGIWRETRY */ ++ rtw_wx_set_enc, /* SIOCSIWENCODE */ ++ rtw_wx_get_enc, /* SIOCGIWENCODE */ ++ dummy, /* SIOCSIWPOWER */ ++ rtw_wx_get_power, /* SIOCGIWPOWER */ ++ NULL, /*---hole---*/ ++ NULL, /*---hole---*/ ++ rtw_wx_set_gen_ie, /* SIOCSIWGENIE */ ++ NULL, /* SIOCGWGENIE */ ++ rtw_wx_set_auth, /* SIOCSIWAUTH */ ++ NULL, /* SIOCGIWAUTH */ ++ rtw_wx_set_enc_ext, /* SIOCSIWENCODEEXT */ ++ NULL, /* SIOCGIWENCODEEXT */ ++ rtw_wx_set_pmkid, /* SIOCSIWPMKSA */ ++ NULL, /*---hole---*/ ++}; ++ ++#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT) ++ ++static const struct iw_priv_args rtw_private_args[] = ++{ ++ { SIOCIWFIRSTPRIV + 0x00, IW_PRIV_TYPE_CHAR | 1024, 0 , ""}, //set ++ { SIOCIWFIRSTPRIV + 0x01, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , ""},//get ++/* --- sub-ioctls definitions --- */ ++ { MP_START , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_start" }, //set ++ { MP_PHYPARA, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_phypara" },//get ++ { MP_STOP , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_stop" }, //set ++ { MP_CHANNEL , IW_PRIV_TYPE_CHAR | 1024 , IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_channel" },//get ++ { MP_BANDWIDTH , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_bandwidth"}, //set ++ { MP_RATE , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_rate" },//get ++ { MP_RESET_STATS , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_reset_stats"}, ++ { MP_QUERY , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "mp_query"}, //get ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { READ_REG , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "read_reg" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_RATE , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_rate" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { READ_RF , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "read_rf" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_PSD , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_psd"}, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_DUMP, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_dump" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_TXPOWER , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_txpower"}, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_ANT_TX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ant_tx"}, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_ANT_RX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ant_rx"}, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { WRITE_REG , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "write_reg" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { WRITE_RF , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "write_rf" }, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_CTX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ctx"}, ++ { MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set ++ { MP_ARX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_arx"}, ++ { MP_ANT_RX , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_ant_rx"}, ++ { MP_THER , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ther"}, ++ { EFUSE_SET, IW_PRIV_TYPE_CHAR | 1024, 0, "efuse_set" }, ++ { EFUSE_GET, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "efuse_get" }, ++ { MP_NULL , IW_PRIV_TYPE_CHAR | 1024, 0, "NULL"}, ++ { MP_PWRTRK, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_pwrtrk" }, ++ { MP_IOCTL, IW_PRIV_TYPE_CHAR | 1024, 0, "mp_ioctl"}, // mp_ioctl ++ ++ ++ { SIOCIWFIRSTPRIV + 0x02, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "test"},//set ++}; ++ ++ ++static iw_handler rtw_private_handler[] = ++{ ++ rtw_mp_set, ++ rtw_mp_get, ++}; ++ ++#else // not inlucde MP ++ ++static const struct iw_priv_args rtw_private_args[] = { ++ { ++ SIOCIWFIRSTPRIV + 0x0, ++ IW_PRIV_TYPE_CHAR | 0x7FF, 0, "write" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x1, ++ IW_PRIV_TYPE_CHAR | 0x7FF, ++ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "read" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x2, 0, 0, "driver_ext" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x3, 0, 0, "mp_ioctl" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x4, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "apinfo" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x5, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "setpid" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x6, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_start" ++ }, ++//for PLATFORM_MT53XX ++ { ++ SIOCIWFIRSTPRIV + 0x7, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "get_sensitivity" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x8, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_prob_req_ie" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x9, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_assoc_req_ie" ++ }, ++ ++//for RTK_DMP_PLATFORM ++ { ++ SIOCIWFIRSTPRIV + 0xA, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "channel_plan" ++ }, ++ ++ { ++ SIOCIWFIRSTPRIV + 0xB, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "dbg" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0xC, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, 0, "rfw" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0xD, ++ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "rfr" ++ }, ++#ifdef CONFIG_WOWLAN ++ { ++ SIOCIWFIRSTPRIV + 0xE,0,0, "wowlan_ctrl" ++ }, ++#endif // CONFIG_WOWLAN ++ { ++ SIOCIWFIRSTPRIV + 0x10, ++ IW_PRIV_TYPE_CHAR | 1024, 0, "p2p_set" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x11, ++ IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "p2p_get" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x12, 0, 0, "NULL" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x13, ++ IW_PRIV_TYPE_CHAR | 64, IW_PRIV_TYPE_CHAR | 64 , "p2p_get2" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x14, ++ IW_PRIV_TYPE_CHAR | 64, 0, "tdls" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x15, ++ IW_PRIV_TYPE_CHAR | P2P_PRIVATE_IOCTL_SET_LEN, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | P2P_PRIVATE_IOCTL_SET_LEN , "tdls_get" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x16, ++ IW_PRIV_TYPE_CHAR | 64, 0, "pm_set" ++ }, ++ ++ {SIOCIWFIRSTPRIV + 0x18, IW_PRIV_TYPE_CHAR | IFNAMSIZ , 0 , "rereg_nd_name"}, ++ ++ {SIOCIWFIRSTPRIV + 0x1A, IW_PRIV_TYPE_CHAR | 128, 0, "efuse_set"}, ++ {SIOCIWFIRSTPRIV + 0x1B, IW_PRIV_TYPE_CHAR | 128, IW_PRIV_TYPE_CHAR |IW_PRIV_SIZE_FIXED |0x700 ,"efuse_get"}, ++ { ++ SIOCIWFIRSTPRIV + 0x1D, ++ IW_PRIV_TYPE_CHAR | 40, IW_PRIV_TYPE_CHAR | 0x7FF, "test" ++ }, ++#ifdef CONFIG_INTEL_WIDI ++ { ++ SIOCIWFIRSTPRIV + 0x1E, ++ IW_PRIV_TYPE_CHAR | 1024, 0, "widi_set" ++ }, ++ { ++ SIOCIWFIRSTPRIV + 0x1F, ++ IW_PRIV_TYPE_CHAR | 128, 0, "widi_prob_req" ++ }, ++#endif // CONFIG_INTEL_WIDI ++}; ++ ++static iw_handler rtw_private_handler[] = ++{ ++ rtw_wx_write32, //0x00 ++ rtw_wx_read32, //0x01 ++ rtw_drvext_hdl, //0x02 ++ rtw_mp_ioctl_hdl, //0x03 ++ ++// for MM DTV platform ++ rtw_get_ap_info, //0x04 ++ ++ rtw_set_pid, //0x05 ++ rtw_wps_start, //0x06 ++ ++// for PLATFORM_MT53XX ++ rtw_wx_get_sensitivity, //0x07 ++ rtw_wx_set_mtk_wps_probe_ie, //0x08 ++ rtw_wx_set_mtk_wps_ie, //0x09 ++ ++// for RTK_DMP_PLATFORM ++// Set Channel depend on the country code ++ rtw_wx_set_channel_plan, //0x0A ++ ++ rtw_dbg_port, //0x0B ++ rtw_wx_write_rf, //0x0C ++ rtw_wx_read_rf, //0x0D ++ ++#ifdef CONFIG_WOWLAN ++ rtw_wowlan_ctrl, //0x0E ++#else ++ rtw_wx_priv_null, //0x0E ++#endif //CONFIG_WOWLAN ++ rtw_wx_priv_null, //0x0F ++ ++ rtw_p2p_set, //0x10 ++ rtw_p2p_get, //0x11 ++ NULL, //0x12 ++ rtw_p2p_get2, //0x13 ++ ++ rtw_tdls, //0x14 ++ rtw_tdls_get, //0x15 ++ ++ rtw_pm_set, //0x16 ++ rtw_wx_priv_null, //0x17 ++ rtw_rereg_nd_name, //0x18 ++ rtw_wx_priv_null, //0x19 ++ ++ rtw_mp_efuse_set, //0x1A ++ rtw_mp_efuse_get, //0x1B ++ NULL, // 0x1C is reserved for hostapd ++ rtw_test , // 0x1D ++#ifdef CONFIG_INTEL_WIDI ++ rtw_widi_set, //0x1E ++ rtw_widi_set_probe_request, //0x1F ++#endif // CONFIG_INTEL_WIDI ++}; ++ ++#endif // #if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT) ++ ++#if WIRELESS_EXT >= 17 ++static struct iw_statistics *rtw_get_wireless_stats(struct net_device *dev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(dev); ++ struct iw_statistics *piwstats=&padapter->iwstats; ++ int tmp_level = 0; ++ int tmp_qual = 0; ++ int tmp_noise = 0; ++ ++ if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) != _TRUE) ++ { ++ piwstats->qual.qual = 0; ++ piwstats->qual.level = 0; ++ piwstats->qual.noise = 0; ++ //DBG_871X("No link level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise); ++ } ++ else{ ++ #ifdef CONFIG_SIGNAL_DISPLAY_DBM ++ tmp_level = translate_percentage_to_dbm(padapter->recvpriv.signal_strength); ++ #else ++ tmp_level = padapter->recvpriv.signal_strength; ++ #endif ++ ++ tmp_qual = padapter->recvpriv.signal_qual; ++ tmp_noise =padapter->recvpriv.noise; ++ //DBG_871X("level:%d, qual:%d, noise:%d, rssi (%d)\n", tmp_level, tmp_qual, tmp_noise,padapter->recvpriv.rssi); ++ ++ piwstats->qual.level = tmp_level; ++ piwstats->qual.qual = tmp_qual; ++ piwstats->qual.noise = tmp_noise; ++ } ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)) ++ piwstats->qual.updated = IW_QUAL_ALL_UPDATED ;//|IW_QUAL_DBM; ++#else ++#ifdef RTK_DMP_PLATFORM ++ //IW_QUAL_DBM= 0x8, if driver use this flag, wireless extension will show value of dbm. ++ //remove this flag for show percentage 0~100 ++ piwstats->qual.updated = 0x07; ++#else ++ piwstats->qual.updated = 0x0f; ++#endif ++#endif ++ ++ #ifdef CONFIG_SIGNAL_DISPLAY_DBM ++ piwstats->qual.updated = piwstats->qual.updated | IW_QUAL_DBM; ++ #endif ++ ++ return &padapter->iwstats; ++} ++#endif ++ ++#ifdef CONFIG_WIRELESS_EXT ++struct iw_handler_def rtw_handlers_def = ++{ ++ .standard = rtw_handlers, ++ .num_standard = sizeof(rtw_handlers) / sizeof(iw_handler), ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) || defined(CONFIG_WEXT_PRIV) ++ .private = rtw_private_handler, ++ .private_args = (struct iw_priv_args *)rtw_private_args, ++ .num_private = sizeof(rtw_private_handler) / sizeof(iw_handler), ++ .num_private_args = sizeof(rtw_private_args) / sizeof(struct iw_priv_args), ++#endif ++#if WIRELESS_EXT >= 17 ++ .get_wireless_stats = rtw_get_wireless_stats, ++#endif ++}; ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/mlme_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/mlme_linux.c +new file mode 100644 +index 000000000000..d5183950afd9 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/mlme_linux.c +@@ -0,0 +1,585 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ ++#define _MLME_OSDEP_C_ ++ ++#include ++#include ++#include ++#include ++ ++ ++#ifdef RTK_DMP_PLATFORM ++void Linkup_workitem_callback(struct work_struct *work) ++{ ++ struct mlme_priv *pmlmepriv = container_of(work, struct mlme_priv, Linkup_workitem); ++ _adapter *padapter = container_of(pmlmepriv, _adapter, mlmepriv); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+ Linkup_workitem_callback\n")); ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) ++ kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_LINKUP); ++#else ++ kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_LINKUP); ++#endif ++ ++_func_exit_; ++} ++ ++void Linkdown_workitem_callback(struct work_struct *work) ++{ ++ struct mlme_priv *pmlmepriv = container_of(work, struct mlme_priv, Linkdown_workitem); ++ _adapter *padapter = container_of(pmlmepriv, _adapter, mlmepriv); ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+ Linkdown_workitem_callback\n")); ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) ++ kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_LINKDOWN); ++#else ++ kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_LINKDOWN); ++#endif ++ ++_func_exit_; ++} ++#endif ++ ++ ++/* ++void sitesurvey_ctrl_handler(void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ ++ _sitesurvey_ctrl_handler(adapter); ++ ++ _set_timer(&adapter->mlmepriv.sitesurveyctrl.sitesurvey_ctrl_timer, 3000); ++} ++*/ ++ ++void rtw_join_timeout_handler (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ _rtw_join_timeout_handler(adapter); ++} ++ ++ ++void _rtw_scan_timeout_handler (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ rtw_scan_timeout_handler(adapter); ++} ++ ++ ++void _dynamic_check_timer_handlder (void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ ++ rtw_dynamic_check_timer_handlder(adapter); ++ ++ _set_timer(&adapter->mlmepriv.dynamic_chk_timer, 2000); ++} ++ ++#ifdef CONFIG_SET_SCAN_DENY_TIMER ++void _rtw_set_scan_deny_timer_hdl(void *FunctionContext) ++{ ++ _adapter *adapter = (_adapter *)FunctionContext; ++ rtw_set_scan_deny_timer_hdl(adapter); ++} ++#endif ++ ++ ++void rtw_init_mlme_timer(_adapter *padapter) ++{ ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ _init_timer(&(pmlmepriv->assoc_timer), padapter->pnetdev, rtw_join_timeout_handler, padapter); ++ //_init_timer(&(pmlmepriv->sitesurveyctrl.sitesurvey_ctrl_timer), padapter->pnetdev, sitesurvey_ctrl_handler, padapter); ++ _init_timer(&(pmlmepriv->scan_to_timer), padapter->pnetdev, _rtw_scan_timeout_handler, padapter); ++ ++ _init_timer(&(pmlmepriv->dynamic_chk_timer), padapter->pnetdev, _dynamic_check_timer_handlder, padapter); ++ ++ #ifdef CONFIG_SET_SCAN_DENY_TIMER ++ _init_timer(&(pmlmepriv->set_scan_deny_timer), padapter->pnetdev, _rtw_set_scan_deny_timer_hdl, padapter); ++ #endif ++ ++#ifdef RTK_DMP_PLATFORM ++ _init_workitem(&(pmlmepriv->Linkup_workitem), Linkup_workitem_callback, padapter); ++ _init_workitem(&(pmlmepriv->Linkdown_workitem), Linkdown_workitem_callback, padapter); ++#endif ++ ++} ++ ++extern void rtw_indicate_wx_assoc_event(_adapter *padapter); ++extern void rtw_indicate_wx_disassoc_event(_adapter *padapter); ++ ++void rtw_os_indicate_connect(_adapter *adapter) ++{ ++ ++_func_enter_; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_indicate_connect(adapter); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ rtw_indicate_wx_assoc_event(adapter); ++ netif_carrier_on(adapter->pnetdev); ++ ++ if(adapter->pid[2] !=0) ++ rtw_signal_process(adapter->pid[2], SIGALRM); ++ ++#ifdef RTK_DMP_PLATFORM ++ _set_workitem(&adapter->mlmepriv.Linkup_workitem); ++#endif ++ ++_func_exit_; ++ ++} ++ ++extern void indicate_wx_scan_complete_event(_adapter *padapter); ++void rtw_os_indicate_scan_done( _adapter *padapter, bool aborted) ++{ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_indicate_scan_done(wdev_to_priv(padapter->rtw_wdev), aborted); ++#endif ++ indicate_wx_scan_complete_event(padapter); ++} ++ ++static RT_PMKID_LIST backupPMKIDList[ NUM_PMKID_CACHE ]; ++void rtw_reset_securitypriv( _adapter *adapter ) ++{ ++ u8 backupPMKIDIndex = 0; ++ u8 backupTKIPCountermeasure = 0x00; ++ u32 backupTKIPcountermeasure_time = 0; ++ // add for CONFIG_IEEE80211W, none 11w also can use ++ _irqL irqL; ++ struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; ++ ++ _enter_critical_bh(&adapter->security_key_mutex, &irqL); ++ ++ if(adapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X)//802.1x ++ { ++ // Added by Albert 2009/02/18 ++ // We have to backup the PMK information for WiFi PMK Caching test item. ++ // ++ // Backup the btkip_countermeasure information. ++ // When the countermeasure is trigger, the driver have to disconnect with AP for 60 seconds. ++ ++ _rtw_memset( &backupPMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE ); ++ ++ _rtw_memcpy( &backupPMKIDList[ 0 ], &adapter->securitypriv.PMKIDList[ 0 ], sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE ); ++ backupPMKIDIndex = adapter->securitypriv.PMKIDIndex; ++ backupTKIPCountermeasure = adapter->securitypriv.btkip_countermeasure; ++ backupTKIPcountermeasure_time = adapter->securitypriv.btkip_countermeasure_time; ++#ifdef CONFIG_IEEE80211W ++ //reset RX BIP packet number ++ pmlmeext->mgnt_80211w_IPN_rx = 0; ++#endif //CONFIG_IEEE80211W ++ _rtw_memset((unsigned char *)&adapter->securitypriv, 0, sizeof (struct security_priv)); ++ //_init_timer(&(adapter->securitypriv.tkip_timer),adapter->pnetdev, rtw_use_tkipkey_handler, adapter); ++ ++ // Added by Albert 2009/02/18 ++ // Restore the PMK information to securitypriv structure for the following connection. ++ _rtw_memcpy( &adapter->securitypriv.PMKIDList[ 0 ], &backupPMKIDList[ 0 ], sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE ); ++ adapter->securitypriv.PMKIDIndex = backupPMKIDIndex; ++ adapter->securitypriv.btkip_countermeasure = backupTKIPCountermeasure; ++ adapter->securitypriv.btkip_countermeasure_time = backupTKIPcountermeasure_time; ++ ++ adapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen; ++ adapter->securitypriv.ndisencryptstatus = Ndis802_11WEPDisabled; ++ ++ } ++ else //reset values in securitypriv ++ { ++ //if(adapter->mlmepriv.fw_state & WIFI_STATION_STATE) ++ //{ ++ struct security_priv *psec_priv=&adapter->securitypriv; ++ ++ psec_priv->dot11AuthAlgrthm =dot11AuthAlgrthm_Open; //open system ++ psec_priv->dot11PrivacyAlgrthm = _NO_PRIVACY_; ++ psec_priv->dot11PrivacyKeyIndex = 0; ++ ++ psec_priv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ psec_priv->dot118021XGrpKeyid = 1; ++ ++ psec_priv->ndisauthtype = Ndis802_11AuthModeOpen; ++ psec_priv->ndisencryptstatus = Ndis802_11WEPDisabled; ++ //} ++ } ++ // add for CONFIG_IEEE80211W, none 11w also can use ++ _exit_critical_bh(&adapter->security_key_mutex, &irqL); ++} ++ ++void rtw_os_indicate_disconnect( _adapter *adapter ) ++{ ++ //RT_PMKID_LIST backupPMKIDList[ NUM_PMKID_CACHE ]; ++ ++_func_enter_; ++ ++ netif_carrier_off(adapter->pnetdev); // Do it first for tx broadcast pkt after disconnection issue! ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_indicate_disconnect(adapter); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ rtw_indicate_wx_disassoc_event(adapter); ++ ++#ifdef RTK_DMP_PLATFORM ++ _set_workitem(&adapter->mlmepriv.Linkdown_workitem); ++#endif ++ //modify for CONFIG_IEEE80211W, none 11w also can use the same command ++ rtw_reset_securitypriv_cmd(adapter); ++ ++_func_exit_; ++ ++} ++ ++void rtw_report_sec_ie(_adapter *adapter,u8 authmode,u8 *sec_ie) ++{ ++ uint len; ++ u8 *buff,*p,i; ++ union iwreq_data wrqu; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+rtw_report_sec_ie, authmode=%d\n", authmode)); ++ ++ buff = NULL; ++ if(authmode==_WPA_IE_ID_) ++ { ++ RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("rtw_report_sec_ie, authmode=%d\n", authmode)); ++ ++ buff = rtw_malloc(IW_CUSTOM_MAX); ++ ++ _rtw_memset(buff,0,IW_CUSTOM_MAX); ++ ++ p=buff; ++ ++ p+=sprintf(p,"ASSOCINFO(ReqIEs="); ++ ++ len = sec_ie[1]+2; ++ len = (len < IW_CUSTOM_MAX) ? len:IW_CUSTOM_MAX; ++ ++ for(i=0;ipnetdev,IWEVCUSTOM,&wrqu,buff); ++ ++ if(buff) ++ rtw_mfree(buff, IW_CUSTOM_MAX); ++ ++ } ++ ++_func_exit_; ++ ++} ++ ++void _survey_timer_hdl (void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ ++ survey_timer_hdl(padapter); ++} ++ ++void _link_timer_hdl (void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ link_timer_hdl(padapter); ++} ++ ++void _addba_timer_hdl(void *FunctionContext) ++{ ++ struct sta_info *psta = (struct sta_info *)FunctionContext; ++ addba_timer_hdl(psta); ++} ++ ++#ifdef CONFIG_IEEE80211W ++void _sa_query_timer_hdl (void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ sa_query_timer_hdl(padapter); ++} ++#endif //CONFIG_IEEE80211W ++ ++void init_addba_retry_timer(_adapter *padapter, struct sta_info *psta) ++{ ++ ++ _init_timer(&psta->addba_retry_timer, padapter->pnetdev, _addba_timer_hdl, psta); ++} ++ ++/* ++void _reauth_timer_hdl(void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ reauth_timer_hdl(padapter); ++} ++ ++void _reassoc_timer_hdl(void *FunctionContext) ++{ ++ _adapter *padapter = (_adapter *)FunctionContext; ++ reassoc_timer_hdl(padapter); ++} ++*/ ++ ++void init_mlme_ext_timer(_adapter *padapter) ++{ ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ ++ _init_timer(&pmlmeext->survey_timer, padapter->pnetdev, _survey_timer_hdl, padapter); ++ _init_timer(&pmlmeext->link_timer, padapter->pnetdev, _link_timer_hdl, padapter); ++#ifdef CONFIG_IEEE80211W ++ _init_timer(&pmlmeext->sa_query_timer, padapter->pnetdev, _sa_query_timer_hdl, padapter); ++#endif //CONFIG_IEEE80211W ++ //_init_timer(&pmlmeext->ADDBA_timer, padapter->pnetdev, _addba_timer_hdl, padapter); ++ ++ //_init_timer(&pmlmeext->reauth_timer, padapter->pnetdev, _reauth_timer_hdl, padapter); ++ //_init_timer(&pmlmeext->reassoc_timer, padapter->pnetdev, _reassoc_timer_hdl, padapter); ++} ++ ++#ifdef CONFIG_AP_MODE ++ ++void rtw_indicate_sta_assoc_event(_adapter *padapter, struct sta_info *psta) ++{ ++ union iwreq_data wrqu; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ if(psta==NULL) ++ return; ++ ++ if(psta->aid > NUM_STA) ++ return; ++ ++ if(pstapriv->sta_aid[psta->aid - 1] != psta) ++ return; ++ ++ ++ wrqu.addr.sa_family = ARPHRD_ETHER; ++ ++ _rtw_memcpy(wrqu.addr.sa_data, psta->hwaddr, ETH_ALEN); ++ ++ DBG_871X("+rtw_indicate_sta_assoc_event\n"); ++ ++ wireless_send_event(padapter->pnetdev, IWEVREGISTERED, &wrqu, NULL); ++ ++} ++ ++void rtw_indicate_sta_disassoc_event(_adapter *padapter, struct sta_info *psta) ++{ ++ union iwreq_data wrqu; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ ++ if(psta==NULL) ++ return; ++ ++ if(psta->aid > NUM_STA) ++ return; ++ ++ if(pstapriv->sta_aid[psta->aid - 1] != psta) ++ return; ++ ++ ++ wrqu.addr.sa_family = ARPHRD_ETHER; ++ ++ _rtw_memcpy(wrqu.addr.sa_data, psta->hwaddr, ETH_ALEN); ++ ++ DBG_871X("+rtw_indicate_sta_disassoc_event\n"); ++ ++ wireless_send_event(padapter->pnetdev, IWEVEXPIRED, &wrqu, NULL); ++ ++} ++ ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ ++static int mgnt_xmit_entry(struct sk_buff *skb, struct net_device *pnetdev) ++{ ++ struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev); ++ _adapter *padapter = (_adapter *)phostapdpriv->padapter; ++ ++ //DBG_871X("%s\n", __FUNCTION__); ++ ++ return rtw_hal_hostap_mgnt_xmit_entry(padapter, skb); ++} ++ ++static int mgnt_netdev_open(struct net_device *pnetdev) ++{ ++ struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev); ++ ++ DBG_871X("mgnt_netdev_open: MAC Address:" MAC_FMT "\n", MAC_ARG(pnetdev->dev_addr)); ++ ++ ++ init_usb_anchor(&phostapdpriv->anchored); ++ ++ if(!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_start_queue(pnetdev); ++ else ++ rtw_netif_wake_queue(pnetdev); ++ ++ ++ netif_carrier_on(pnetdev); ++ ++ //rtw_write16(phostapdpriv->padapter, 0x0116, 0x0100);//only excluding beacon ++ ++ return 0; ++} ++static int mgnt_netdev_close(struct net_device *pnetdev) ++{ ++ struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev); ++ ++ DBG_871X("%s\n", __FUNCTION__); ++ ++ usb_kill_anchored_urbs(&phostapdpriv->anchored); ++ ++ netif_carrier_off(pnetdev); ++ ++ if (!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_stop_queue(pnetdev); ++ ++ //rtw_write16(phostapdpriv->padapter, 0x0116, 0x3f3f); ++ ++ return 0; ++} ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++static const struct net_device_ops rtl871x_mgnt_netdev_ops = { ++ .ndo_open = mgnt_netdev_open, ++ .ndo_stop = mgnt_netdev_close, ++ .ndo_start_xmit = mgnt_xmit_entry, ++ //.ndo_set_mac_address = r871x_net_set_mac_address, ++ //.ndo_get_stats = r871x_net_get_stats, ++ //.ndo_do_ioctl = r871x_mp_ioctl, ++}; ++#endif ++ ++int hostapd_mode_init(_adapter *padapter) ++{ ++ unsigned char mac[ETH_ALEN]; ++ struct hostapd_priv *phostapdpriv; ++ struct net_device *pnetdev; ++ ++ pnetdev = rtw_alloc_etherdev(sizeof(struct hostapd_priv)); ++ if (!pnetdev) ++ return -ENOMEM; ++ ++ //SET_MODULE_OWNER(pnetdev); ++ ether_setup(pnetdev); ++ ++ //pnetdev->type = ARPHRD_IEEE80211; ++ ++ phostapdpriv = rtw_netdev_priv(pnetdev); ++ phostapdpriv->pmgnt_netdev = pnetdev; ++ phostapdpriv->padapter= padapter; ++ padapter->phostapdpriv = phostapdpriv; ++ ++ //pnetdev->init = NULL; ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++ ++ DBG_871X("register rtl871x_mgnt_netdev_ops to netdev_ops\n"); ++ ++ pnetdev->netdev_ops = &rtl871x_mgnt_netdev_ops; ++ ++#else ++ ++ pnetdev->open = mgnt_netdev_open; ++ ++ pnetdev->stop = mgnt_netdev_close; ++ ++ pnetdev->hard_start_xmit = mgnt_xmit_entry; ++ ++ //pnetdev->set_mac_address = r871x_net_set_mac_address; ++ ++ //pnetdev->get_stats = r871x_net_get_stats; ++ ++ //pnetdev->do_ioctl = r871x_mp_ioctl; ++ ++#endif ++ ++ pnetdev->watchdog_timeo = HZ; /* 1 second timeout */ ++ ++ //pnetdev->wireless_handlers = NULL; ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ pnetdev->features |= NETIF_F_IP_CSUM; ++#endif ++ ++ ++ ++ if(dev_alloc_name(pnetdev,"mgnt.wlan%d") < 0) ++ { ++ DBG_871X("hostapd_mode_init(): dev_alloc_name, fail! \n"); ++ } ++ ++ ++ //SET_NETDEV_DEV(pnetdev, pintfpriv->udev); ++ ++ ++ mac[0]=0x00; ++ mac[1]=0xe0; ++ mac[2]=0x4c; ++ mac[3]=0x87; ++ mac[4]=0x11; ++ mac[5]=0x12; ++ ++ _rtw_memcpy(pnetdev->dev_addr, mac, ETH_ALEN); ++ ++ ++ netif_carrier_off(pnetdev); ++ ++ ++ /* Tell the network stack we exist */ ++ if (register_netdev(pnetdev) != 0) ++ { ++ DBG_871X("hostapd_mode_init(): register_netdev fail!\n"); ++ ++ if(pnetdev) ++ { ++ rtw_free_netdev(pnetdev); ++ } ++ } ++ ++ return 0; ++ ++} ++ ++void hostapd_mode_unload(_adapter *padapter) ++{ ++ struct hostapd_priv *phostapdpriv = padapter->phostapdpriv; ++ struct net_device *pnetdev = phostapdpriv->pmgnt_netdev; ++ ++ unregister_netdev(pnetdev); ++ rtw_free_netdev(pnetdev); ++ ++} ++ ++#endif ++#endif +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c +new file mode 100644 +index 000000000000..3854f27f833f +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c +@@ -0,0 +1,2749 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _OS_INTFS_C_ ++ ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++#ifdef CONFIG_PCI_HCI ++#include ++#endif ++ ++#ifdef CONFIG_BR_EXT ++#include ++#endif //CONFIG_BR_EXT ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Realtek Wireless Lan Driver"); ++MODULE_AUTHOR("Realtek Semiconductor Corp."); ++MODULE_VERSION(DRIVERVERSION); ++ ++/* module param defaults */ ++int rtw_chip_version = 0x00; ++int rtw_rfintfs = HWPI; ++int rtw_lbkmode = 0;//RTL8712_AIR_TRX; ++ ++ ++int rtw_network_mode = Ndis802_11IBSS;//Ndis802_11Infrastructure;//infra, ad-hoc, auto ++//NDIS_802_11_SSID ssid; ++int rtw_channel = 1;//ad-hoc support requirement ++int rtw_wireless_mode = WIRELESS_11BG_24N; ++int rtw_vrtl_carrier_sense = AUTO_VCS; ++int rtw_vcs_type = RTS_CTS;//* ++int rtw_rts_thresh = 2347;//* ++int rtw_frag_thresh = 2346;//* ++int rtw_preamble = PREAMBLE_LONG;//long, short, auto ++int rtw_scan_mode = 1;//active, passive ++int rtw_adhoc_tx_pwr = 1; ++int rtw_soft_ap = 0; ++//int smart_ps = 1; ++#ifdef CONFIG_POWER_SAVING ++int rtw_power_mgnt = 1; ++#ifdef CONFIG_IPS_LEVEL_2 ++int rtw_ips_mode = IPS_LEVEL_2; ++#else ++int rtw_ips_mode = IPS_NORMAL; ++#endif ++#else ++int rtw_power_mgnt = PS_MODE_ACTIVE; ++int rtw_ips_mode = IPS_NONE; ++#endif ++module_param(rtw_ips_mode, int, 0644); ++MODULE_PARM_DESC(rtw_ips_mode,"The default IPS mode"); ++ ++int rtw_radio_enable = 1; ++int rtw_long_retry_lmt = 7; ++int rtw_short_retry_lmt = 7; ++int rtw_busy_thresh = 40; ++//int qos_enable = 0; //* ++int rtw_ack_policy = NORMAL_ACK; ++#ifdef CONFIG_MP_INCLUDED ++int rtw_mp_mode = 1; ++#else ++int rtw_mp_mode = 0; ++#endif ++int rtw_software_encrypt = 0; ++int rtw_software_decrypt = 0; ++ ++int rtw_acm_method = 0;// 0:By SW 1:By HW. ++ ++int rtw_wmm_enable = 1;// default is set to enable the wmm. ++int rtw_uapsd_enable = 0; ++int rtw_uapsd_max_sp = NO_LIMIT; ++int rtw_uapsd_acbk_en = 0; ++int rtw_uapsd_acbe_en = 0; ++int rtw_uapsd_acvi_en = 0; ++int rtw_uapsd_acvo_en = 0; ++ ++#ifdef CONFIG_80211N_HT ++int rtw_ht_enable = 1; ++int rtw_cbw40_enable = 3; // 0 :diable, bit(0): enable 2.4g, bit(1): enable 5g ++int rtw_ampdu_enable = 1;//for enable tx_ampdu ++int rtw_rx_stbc = 1;// 0: disable, bit(0):enable 2.4g, bit(1):enable 5g, default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ ++int rtw_ampdu_amsdu = 0;// 0: disabled, 1:enabled, 2:auto ++#endif ++ ++int rtw_lowrate_two_xmit = 1;//Use 2 path Tx to transmit MCS0~7 and legacy mode ++ ++//int rf_config = RF_1T2R; // 1T2R ++int rtw_rf_config = RF_819X_MAX_TYPE; //auto ++int rtw_low_power = 0; ++#ifdef CONFIG_WIFI_TEST ++int rtw_wifi_spec = 1;//for wifi test ++#else ++int rtw_wifi_spec = 0; ++#endif ++ ++int rtw_special_rf_path = 0; //0: 2T2R ,1: only turn on path A 1T1R, 2: only turn on path B 1T1R ++ ++int rtw_channel_plan = RT_CHANNEL_DOMAIN_MAX; ++ ++#ifdef CONFIG_BT_COEXIST ++int rtw_bt_iso = 2;// 0:Low, 1:High, 2:From Efuse ++int rtw_bt_sco = 3;// 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy, 5.OtherBusy ++int rtw_bt_ampdu =1 ;// 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. ++#endif ++int rtw_AcceptAddbaReq = _TRUE;// 0:Reject AP's Add BA req, 1:Accept AP's Add BA req. ++ ++int rtw_antdiv_cfg = 2; // 0:OFF , 1:ON, 2:decide by Efuse config ++ ++#ifdef CONFIG_USB_AUTOSUSPEND ++int rtw_enusbss = 1;//0:disable,1:enable ++#else ++int rtw_enusbss = 0;//0:disable,1:enable ++#endif ++ ++int rtw_hwpdn_mode=2;//0:disable,1:enable,2: by EFUSE config ++ ++#ifdef CONFIG_HW_PWRP_DETECTION ++int rtw_hwpwrp_detect = 1; ++#else ++int rtw_hwpwrp_detect = 0; //HW power ping detect 0:disable , 1:enable ++#endif ++ ++#ifdef CONFIG_USB_HCI ++int rtw_hw_wps_pbc = 1; ++#else ++int rtw_hw_wps_pbc = 0; ++#endif ++ ++#ifdef CONFIG_TX_MCAST2UNI ++int rtw_mc2u_disable = 0; ++#endif // CONFIG_TX_MCAST2UNI ++ ++int rtw_mac_phy_mode = 0; //0:by efuse, 1:smsp, 2:dmdp, 3:dmsp. ++ ++#ifdef CONFIG_80211D ++int rtw_80211d = 0; ++#endif ++ ++char* ifname = "wlan%d"; ++module_param(ifname, charp, 0644); ++MODULE_PARM_DESC(ifname, "The default name to allocate for first interface"); ++ ++char* if2name = "wlan%d"; ++module_param(if2name, charp, 0644); ++MODULE_PARM_DESC(if2name, "The default name to allocate for second interface"); ++ ++char* rtw_initmac = 0; // temp mac address if users want to use instead of the mac address in Efuse ++ ++#ifdef CONFIG_MULTI_VIR_IFACES ++int rtw_ext_iface_num = 1;//primary/secondary iface is excluded ++module_param(rtw_ext_iface_num, int, 0644); ++#endif //CONFIG_MULTI_VIR_IFACES ++ ++module_param(rtw_initmac, charp, 0644); ++module_param(rtw_channel_plan, int, 0644); ++module_param(rtw_chip_version, int, 0644); ++module_param(rtw_rfintfs, int, 0644); ++module_param(rtw_lbkmode, int, 0644); ++module_param(rtw_network_mode, int, 0644); ++module_param(rtw_channel, int, 0644); ++module_param(rtw_mp_mode, int, 0644); ++module_param(rtw_wmm_enable, int, 0644); ++module_param(rtw_vrtl_carrier_sense, int, 0644); ++module_param(rtw_vcs_type, int, 0644); ++module_param(rtw_busy_thresh, int, 0644); ++#ifdef CONFIG_80211N_HT ++module_param(rtw_ht_enable, int, 0644); ++module_param(rtw_cbw40_enable, int, 0644); ++module_param(rtw_ampdu_enable, int, 0644); ++module_param(rtw_rx_stbc, int, 0644); ++module_param(rtw_ampdu_amsdu, int, 0644); ++#endif ++ ++module_param(rtw_lowrate_two_xmit, int, 0644); ++ ++module_param(rtw_rf_config, int, 0644); ++module_param(rtw_power_mgnt, int, 0644); ++module_param(rtw_low_power, int, 0644); ++module_param(rtw_wifi_spec, int, 0644); ++ ++module_param(rtw_special_rf_path, int, 0644); ++ ++module_param(rtw_antdiv_cfg, int, 0644); ++ ++ ++module_param(rtw_enusbss, int, 0644); ++module_param(rtw_hwpdn_mode, int, 0644); ++module_param(rtw_hwpwrp_detect, int, 0644); ++ ++module_param(rtw_hw_wps_pbc, int, 0644); ++ ++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++char *rtw_adaptor_info_caching_file_path= "/data/misc/wifi/rtw_cache"; ++module_param(rtw_adaptor_info_caching_file_path, charp, 0644); ++MODULE_PARM_DESC(rtw_adaptor_info_caching_file_path, "The path of adapter info cache file"); ++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE ++ ++#ifdef CONFIG_LAYER2_ROAMING ++uint rtw_max_roaming_times=2; ++module_param(rtw_max_roaming_times, uint, 0644); ++MODULE_PARM_DESC(rtw_max_roaming_times,"The max roaming times to try"); ++#endif //CONFIG_LAYER2_ROAMING ++ ++#ifdef CONFIG_IOL ++bool rtw_force_iol=_FALSE; ++module_param(rtw_force_iol, bool, 0644); ++MODULE_PARM_DESC(rtw_force_iol,"Force to enable IOL"); ++#endif //CONFIG_IOL ++ ++#ifdef CONFIG_FILE_FWIMG ++char *rtw_fw_file_path= ""; ++module_param(rtw_fw_file_path, charp, 0644); ++MODULE_PARM_DESC(rtw_fw_file_path, "The path of fw image"); ++#endif //CONFIG_FILE_FWIMG ++ ++#ifdef CONFIG_TX_MCAST2UNI ++module_param(rtw_mc2u_disable, int, 0644); ++#endif // CONFIG_TX_MCAST2UNI ++ ++module_param(rtw_mac_phy_mode, int, 0644); ++ ++#ifdef CONFIG_80211D ++module_param(rtw_80211d, int, 0644); ++#endif ++ ++uint rtw_notch_filter = RTW_NOTCH_FILTER; ++module_param(rtw_notch_filter, uint, 0644); ++MODULE_PARM_DESC(rtw_notch_filter, "0:Disable, 1:Enable, 2:Enable only for P2P"); ++ ++static uint loadparam( _adapter *padapter, _nic_hdl pnetdev); ++int _netdev_open(struct net_device *pnetdev); ++int netdev_open (struct net_device *pnetdev); ++static int netdev_close (struct net_device *pnetdev); ++ ++//#ifdef RTK_DMP_PLATFORM ++#ifdef CONFIG_PROC_DEBUG ++#define RTL8192C_PROC_NAME "rtl819xC" ++#define RTL8192D_PROC_NAME "rtl819xD" ++static char rtw_proc_name[IFNAMSIZ]; ++static struct proc_dir_entry *rtw_proc = NULL; ++static int rtw_proc_cnt = 0; ++ ++#define RTW_PROC_NAME DRV_NAME ++ ++void rtw_proc_init_one(struct net_device *dev) ++{ ++ struct proc_dir_entry *dir_dev = NULL; ++ struct proc_dir_entry *entry=NULL; ++ _adapter *padapter = rtw_netdev_priv(dev); ++ u8 rf_type; ++ ++ if(rtw_proc == NULL) ++ { ++ if(padapter->chip_type == RTL8188C_8192C) ++ { ++ _rtw_memcpy(rtw_proc_name, RTL8192C_PROC_NAME, sizeof(RTL8192C_PROC_NAME)); ++ } ++ else if(padapter->chip_type == RTL8192D) ++ { ++ _rtw_memcpy(rtw_proc_name, RTL8192D_PROC_NAME, sizeof(RTL8192D_PROC_NAME)); ++ } ++ else if(padapter->chip_type == RTL8723A) ++ { ++ _rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME)); ++ } ++ else if(padapter->chip_type == RTL8188E) ++ { ++ _rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME)); ++ } ++ else ++ { ++ _rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME)); ++ } ++ ++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, proc_net); ++#else ++ rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, init_net.proc_net); ++#endif ++ if (rtw_proc == NULL) { ++ DBG_871X(KERN_ERR "Unable to create rtw_proc directory\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("ver_info", S_IFREG | S_IRUGO, rtw_proc, proc_get_drv_version, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("log_level", S_IFREG | S_IRUGO, ++ rtw_proc, proc_get_log_level, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_log_level; ++ ++#ifdef DBG_MEM_ALLOC ++ entry = create_proc_read_entry("mstat", S_IFREG | S_IRUGO, ++ rtw_proc, proc_get_mstat, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++#endif /* DBG_MEM_ALLOC */ ++ } ++ ++ ++ ++ if(padapter->dir_dev == NULL) ++ { ++ padapter->dir_dev = create_proc_entry(dev->name, ++ S_IFDIR | S_IRUGO | S_IXUGO, ++ rtw_proc); ++ ++ dir_dev = padapter->dir_dev; ++ ++ if(dir_dev==NULL) ++ { ++ if(rtw_proc_cnt == 0) ++ { ++ if(rtw_proc){ ++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ remove_proc_entry(rtw_proc_name, proc_net); ++#else ++ remove_proc_entry(rtw_proc_name, init_net.proc_net); ++#endif ++ rtw_proc = NULL; ++ } ++ } ++ ++ DBG_871X("Unable to create dir_dev directory\n"); ++ return; ++ } ++ } ++ else ++ { ++ return; ++ } ++ ++ rtw_proc_cnt++; ++ ++ entry = create_proc_read_entry("write_reg", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_write_reg, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_write_reg; ++ ++ entry = create_proc_read_entry("read_reg", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_read_reg, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_read_reg; ++ ++ ++ entry = create_proc_read_entry("fwstate", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_fwstate, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ ++ entry = create_proc_read_entry("sec_info", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_sec_info, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ ++ entry = create_proc_read_entry("mlmext_state", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_mlmext_state, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ ++ entry = create_proc_read_entry("qos_option", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_qos_option, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("ht_option", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_ht_option, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("rf_info", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rf_info, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("ap_info", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_ap_info, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("adapter_state", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_adapter_state, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("trx_info", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_trx_info, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("mac_reg_dump1", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_mac_reg_dump1, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("mac_reg_dump2", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_mac_reg_dump2, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("mac_reg_dump3", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_mac_reg_dump3, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("bb_reg_dump1", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_bb_reg_dump1, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("bb_reg_dump2", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_bb_reg_dump2, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("bb_reg_dump3", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_bb_reg_dump3, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("rf_reg_dump1", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rf_reg_dump1, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("rf_reg_dump2", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rf_reg_dump2, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type )) { ++ entry = create_proc_read_entry("rf_reg_dump3", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rf_reg_dump3, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("rf_reg_dump4", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rf_reg_dump4, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ } ++ ++#ifdef CONFIG_AP_MODE ++ ++ entry = create_proc_read_entry("all_sta_info", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_all_sta_info, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++ entry = create_proc_read_entry("_malloc_cnt", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_malloc_cnt, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++#endif ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ entry = create_proc_read_entry("best_channel", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_best_channel, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_best_channel; ++#endif ++ ++ entry = create_proc_read_entry("rx_signal", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rx_signal, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_rx_signal; ++ ++ entry = create_proc_read_entry("ht_enable", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_ht_enable, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_ht_enable; ++ ++ entry = create_proc_read_entry("cbw40_enable", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_cbw40_enable, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_cbw40_enable; ++ ++ entry = create_proc_read_entry("ampdu_enable", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_ampdu_enable, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_ampdu_enable; ++ ++ entry = create_proc_read_entry("rx_stbc", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rx_stbc, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_rx_stbc; ++ ++ ++ entry = create_proc_read_entry("path_rssi", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_two_path_rssi, dev); ++ ++ entry = create_proc_read_entry("vid", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_vid, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("pid", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_pid, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ ++ entry = create_proc_read_entry("rssi_disp", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_rssi_disp, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_rssi_disp; ++ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ entry = create_proc_read_entry("sreset", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_sreset, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_sreset; ++#endif /* DBG_CONFIG_ERROR_DETECT */ ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ entry = create_proc_read_entry("dm_adaptivity", S_IFREG | S_IRUGO, ++ dir_dev, proc_get_dm_adaptivity, dev); ++ if (!entry) { ++ DBG_871X("Unable to create_proc_read_entry!\n"); ++ return; ++ } ++ entry->write_proc = proc_set_dm_adaptivity; ++#endif /* CONFIG_DM_ADAPTIVITY */ ++ ++} ++ ++void rtw_proc_remove_one(struct net_device *dev) ++{ ++ struct proc_dir_entry *dir_dev = NULL; ++ _adapter *padapter = rtw_netdev_priv(dev); ++ u8 rf_type; ++ ++ dir_dev = padapter->dir_dev; ++ padapter->dir_dev = NULL; ++ ++ if (dir_dev) { ++ ++ remove_proc_entry("write_reg", dir_dev); ++ remove_proc_entry("read_reg", dir_dev); ++ remove_proc_entry("fwstate", dir_dev); ++ remove_proc_entry("sec_info", dir_dev); ++ remove_proc_entry("mlmext_state", dir_dev); ++ remove_proc_entry("qos_option", dir_dev); ++ remove_proc_entry("ht_option", dir_dev); ++ remove_proc_entry("rf_info", dir_dev); ++ remove_proc_entry("ap_info", dir_dev); ++ remove_proc_entry("adapter_state", dir_dev); ++ remove_proc_entry("trx_info", dir_dev); ++ ++ remove_proc_entry("mac_reg_dump1", dir_dev); ++ remove_proc_entry("mac_reg_dump2", dir_dev); ++ remove_proc_entry("mac_reg_dump3", dir_dev); ++ remove_proc_entry("bb_reg_dump1", dir_dev); ++ remove_proc_entry("bb_reg_dump2", dir_dev); ++ remove_proc_entry("bb_reg_dump3", dir_dev); ++ remove_proc_entry("rf_reg_dump1", dir_dev); ++ remove_proc_entry("rf_reg_dump2", dir_dev); ++ rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type)); ++ if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type )) { ++ remove_proc_entry("rf_reg_dump3", dir_dev); ++ remove_proc_entry("rf_reg_dump4", dir_dev); ++ } ++#ifdef CONFIG_AP_MODE ++ remove_proc_entry("all_sta_info", dir_dev); ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++ remove_proc_entry("_malloc_cnt", dir_dev); ++#endif ++ ++#ifdef CONFIG_FIND_BEST_CHANNEL ++ remove_proc_entry("best_channel", dir_dev); ++#endif ++ remove_proc_entry("rx_signal", dir_dev); ++ ++ remove_proc_entry("cbw40_enable", dir_dev); ++ ++ remove_proc_entry("ht_enable", dir_dev); ++ ++ remove_proc_entry("ampdu_enable", dir_dev); ++ ++ remove_proc_entry("rx_stbc", dir_dev); ++ ++ remove_proc_entry("path_rssi", dir_dev); ++ ++ remove_proc_entry("vid", dir_dev); ++ ++ remove_proc_entry("pid", dir_dev); ++ ++ remove_proc_entry("rssi_disp", dir_dev); ++ ++#if defined(DBG_CONFIG_ERROR_DETECT) ++ remove_proc_entry("sreset", dir_dev); ++#endif /* DBG_CONFIG_ERROR_DETECT */ ++ ++#ifdef CONFIG_DM_ADAPTIVITY ++ remove_proc_entry("dm_adaptivity", dir_dev); ++#endif ++ ++ remove_proc_entry(dev->name, rtw_proc); ++ dir_dev = NULL; ++ ++ } ++ else ++ { ++ return; ++ } ++ ++ rtw_proc_cnt--; ++ ++ if(rtw_proc_cnt == 0) ++ { ++ if(rtw_proc){ ++ remove_proc_entry("ver_info", rtw_proc); ++ ++ remove_proc_entry("log_level", rtw_proc); ++ #ifdef DBG_MEM_ALLOC ++ remove_proc_entry("mstat", rtw_proc); ++ #endif /* DBG_MEM_ALLOC */ ++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ remove_proc_entry(rtw_proc_name, proc_net); ++#else ++ remove_proc_entry(rtw_proc_name, init_net.proc_net); ++#endif ++ rtw_proc = NULL; ++ } ++ } ++} ++#endif ++ ++uint loadparam( _adapter *padapter, _nic_hdl pnetdev); ++uint loadparam( _adapter *padapter, _nic_hdl pnetdev) ++{ ++ ++ uint status = _SUCCESS; ++ struct registry_priv *registry_par = &padapter->registrypriv; ++ ++_func_enter_; ++ ++ registry_par->chip_version = (u8)rtw_chip_version; ++ registry_par->rfintfs = (u8)rtw_rfintfs; ++ registry_par->lbkmode = (u8)rtw_lbkmode; ++ //registry_par->hci = (u8)hci; ++ registry_par->network_mode = (u8)rtw_network_mode; ++ ++ _rtw_memcpy(registry_par->ssid.Ssid, "ANY", 3); ++ registry_par->ssid.SsidLength = 3; ++ ++ registry_par->channel = (u8)rtw_channel; ++ registry_par->wireless_mode = (u8)rtw_wireless_mode; ++ registry_par->vrtl_carrier_sense = (u8)rtw_vrtl_carrier_sense ; ++ registry_par->vcs_type = (u8)rtw_vcs_type; ++ registry_par->rts_thresh=(u16)rtw_rts_thresh; ++ registry_par->frag_thresh=(u16)rtw_frag_thresh; ++ registry_par->preamble = (u8)rtw_preamble; ++ registry_par->scan_mode = (u8)rtw_scan_mode; ++ registry_par->adhoc_tx_pwr = (u8)rtw_adhoc_tx_pwr; ++ registry_par->soft_ap= (u8)rtw_soft_ap; ++ //registry_par->smart_ps = (u8)rtw_smart_ps; ++ registry_par->power_mgnt = (u8)rtw_power_mgnt; ++ registry_par->ips_mode = (u8)rtw_ips_mode; ++ registry_par->radio_enable = (u8)rtw_radio_enable; ++ registry_par->long_retry_lmt = (u8)rtw_long_retry_lmt; ++ registry_par->short_retry_lmt = (u8)rtw_short_retry_lmt; ++ registry_par->busy_thresh = (u16)rtw_busy_thresh; ++ //registry_par->qos_enable = (u8)rtw_qos_enable; ++ registry_par->ack_policy = (u8)rtw_ack_policy; ++ registry_par->mp_mode = (u8)rtw_mp_mode; ++ registry_par->software_encrypt = (u8)rtw_software_encrypt; ++ registry_par->software_decrypt = (u8)rtw_software_decrypt; ++ ++ registry_par->acm_method = (u8)rtw_acm_method; ++ ++ //UAPSD ++ registry_par->wmm_enable = (u8)rtw_wmm_enable; ++ registry_par->uapsd_enable = (u8)rtw_uapsd_enable; ++ registry_par->uapsd_max_sp = (u8)rtw_uapsd_max_sp; ++ registry_par->uapsd_acbk_en = (u8)rtw_uapsd_acbk_en; ++ registry_par->uapsd_acbe_en = (u8)rtw_uapsd_acbe_en; ++ registry_par->uapsd_acvi_en = (u8)rtw_uapsd_acvi_en; ++ registry_par->uapsd_acvo_en = (u8)rtw_uapsd_acvo_en; ++ ++#ifdef CONFIG_80211N_HT ++ registry_par->ht_enable = (u8)rtw_ht_enable; ++ registry_par->cbw40_enable = (u8)rtw_cbw40_enable; ++ registry_par->ampdu_enable = (u8)rtw_ampdu_enable; ++ registry_par->rx_stbc = (u8)rtw_rx_stbc; ++ registry_par->ampdu_amsdu = (u8)rtw_ampdu_amsdu; ++#endif ++ ++ registry_par->lowrate_two_xmit = (u8)rtw_lowrate_two_xmit; ++ registry_par->rf_config = (u8)rtw_rf_config; ++ registry_par->low_power = (u8)rtw_low_power; ++ ++ ++ registry_par->wifi_spec = (u8)rtw_wifi_spec; ++ registry_par->special_rf_path = (u8)rtw_special_rf_path; ++ registry_par->channel_plan = (u8)rtw_channel_plan; ++ ++#ifdef CONFIG_BT_COEXIST ++ registry_par->bt_iso = (u8)rtw_bt_iso; ++ registry_par->bt_sco = (u8)rtw_bt_sco; ++ registry_par->bt_ampdu = (u8)rtw_bt_ampdu; ++#endif ++ registry_par->bAcceptAddbaReq = (u8)rtw_AcceptAddbaReq; ++ ++ registry_par->antdiv_cfg = (u8)rtw_antdiv_cfg; ++ ++#ifdef CONFIG_AUTOSUSPEND ++ registry_par->usbss_enable = (u8)rtw_enusbss;//0:disable,1:enable ++#endif ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++ registry_par->hwpdn_mode = (u8)rtw_hwpdn_mode;//0:disable,1:enable,2:by EFUSE config ++ registry_par->hwpwrp_detect = (u8)rtw_hwpwrp_detect;//0:disable,1:enable ++#endif ++ ++ registry_par->hw_wps_pbc = (u8)rtw_hw_wps_pbc; ++ ++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE ++ snprintf(registry_par->adaptor_info_caching_file_path, PATH_LENGTH_MAX, "%s", rtw_adaptor_info_caching_file_path); ++ registry_par->adaptor_info_caching_file_path[PATH_LENGTH_MAX-1]=0; ++#endif ++ ++#ifdef CONFIG_LAYER2_ROAMING ++ registry_par->max_roaming_times = (u8)rtw_max_roaming_times; ++#ifdef CONFIG_INTEL_WIDI ++ registry_par->max_roaming_times = (u8)rtw_max_roaming_times + 2; ++#endif // CONFIG_INTEL_WIDI ++#endif ++ ++#ifdef CONFIG_IOL ++ registry_par->force_iol = rtw_force_iol; ++#endif ++ ++ registry_par->mac_phy_mode = rtw_mac_phy_mode; ++ ++#ifdef CONFIG_80211D ++ registry_par->enable80211d = (u8)rtw_80211d; ++#endif ++ ++ snprintf(registry_par->ifname, 16, "%s", ifname); ++ snprintf(registry_par->if2name, 16, "%s", if2name); ++ ++ registry_par->notch_filter = (u8)rtw_notch_filter; ++ ++#ifdef CONFIG_MULTI_VIR_IFACES ++ registry_par->ext_iface_num = (u8)rtw_ext_iface_num; ++#endif //CONFIG_MULTI_VIR_IFACES ++ ++_func_exit_; ++ ++ return status; ++} ++ ++static int rtw_net_set_mac_address(struct net_device *pnetdev, void *p) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ struct sockaddr *addr = p; ++ ++ if(padapter->bup == _FALSE) ++ { ++ //DBG_871X("r8711_net_set_mac_address(), MAC=%x:%x:%x:%x:%x:%x\n", addr->sa_data[0], addr->sa_data[1], addr->sa_data[2], addr->sa_data[3], ++ //addr->sa_data[4], addr->sa_data[5]); ++ _rtw_memcpy(padapter->eeprompriv.mac_addr, addr->sa_data, ETH_ALEN); ++ //_rtw_memcpy(pnetdev->dev_addr, addr->sa_data, ETH_ALEN); ++ //padapter->bset_hwaddr = _TRUE; ++ } ++ ++ return 0; ++} ++ ++static struct net_device_stats *rtw_net_get_stats(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ struct recv_priv *precvpriv = &(padapter->recvpriv); ++ ++ padapter->stats.tx_packets = pxmitpriv->tx_pkts;//pxmitpriv->tx_pkts++; ++ padapter->stats.rx_packets = precvpriv->rx_pkts;//precvpriv->rx_pkts++; ++ padapter->stats.tx_dropped = pxmitpriv->tx_drop; ++ padapter->stats.rx_dropped = precvpriv->rx_drop; ++ padapter->stats.tx_bytes = pxmitpriv->tx_bytes; ++ padapter->stats.rx_bytes = precvpriv->rx_bytes; ++ ++ return &padapter->stats; ++} ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++/* ++ * AC to queue mapping ++ * ++ * AC_VO -> queue 0 ++ * AC_VI -> queue 1 ++ * AC_BE -> queue 2 ++ * AC_BK -> queue 3 ++ */ ++static const u16 rtw_1d_to_queue[8] = { 2, 3, 3, 2, 1, 1, 0, 0 }; ++ ++/* Given a data frame determine the 802.1p/1d tag to use. */ ++unsigned int rtw_classify8021d(struct sk_buff *skb) ++{ ++ unsigned int dscp; ++ ++ /* skb->priority values from 256->263 are magic values to ++ * directly indicate a specific 802.1d priority. This is used ++ * to allow 802.1d priority to be passed directly in from VLAN ++ * tags, etc. ++ */ ++ if (skb->priority >= 256 && skb->priority <= 263) ++ return skb->priority - 256; ++ ++ switch (skb->protocol) { ++ case htons(ETH_P_IP): ++ dscp = ip_hdr(skb)->tos & 0xfc; ++ break; ++ default: ++ return 0; ++ } ++ ++ return dscp >> 5; ++} ++ ++static u16 rtw_select_queue(struct net_device *dev, struct sk_buff *skb, ++ void *accel_priv, select_queue_fallback_t fallback) ++{ ++ _adapter *padapter = rtw_netdev_priv(dev); ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ skb->priority = rtw_classify8021d(skb); ++ ++ if(pmlmepriv->acm_mask != 0) ++ { ++ skb->priority = qos_acm(pmlmepriv->acm_mask, skb->priority); ++ } ++ ++ return rtw_1d_to_queue[skb->priority]; ++} ++ ++u16 rtw_recv_select_queue(struct sk_buff *skb) ++{ ++ struct iphdr *piphdr; ++ unsigned int dscp; ++ u16 eth_type; ++ u32 priority; ++ u8 *pdata = skb->data; ++ ++ _rtw_memcpy(ð_type, pdata+(ETH_ALEN<<1), 2); ++ ++ switch (eth_type) { ++ case htons(ETH_P_IP): ++ ++ piphdr = (struct iphdr *)(pdata+ETH_HLEN); ++ ++ dscp = piphdr->tos & 0xfc; ++ ++ priority = dscp >> 5; ++ ++ break; ++ default: ++ priority = 0; ++ } ++ ++ return rtw_1d_to_queue[priority]; ++ ++} ++ ++#endif ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++static const struct net_device_ops rtw_netdev_ops = { ++ .ndo_open = netdev_open, ++ .ndo_stop = netdev_close, ++ .ndo_start_xmit = rtw_xmit_entry, ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ .ndo_select_queue = rtw_select_queue, ++#endif ++ .ndo_set_mac_address = rtw_net_set_mac_address, ++ .ndo_get_stats = rtw_net_get_stats, ++ .ndo_do_ioctl = rtw_ioctl, ++}; ++#endif ++ ++int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname) ++{ ++ _adapter *padapter = rtw_netdev_priv(pnetdev); ++ ++#ifdef CONFIG_EASY_REPLACEMENT ++ struct net_device *TargetNetdev = NULL; ++ _adapter *TargetAdapter = NULL; ++ struct net *devnet = NULL; ++ ++ if(padapter->bDongle == 1) ++ { ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ TargetNetdev = dev_get_by_name("wlan0"); ++#else ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++ devnet = pnetdev->nd_net; ++ #else ++ devnet = dev_net(pnetdev); ++ #endif ++ TargetNetdev = dev_get_by_name(devnet, "wlan0"); ++#endif ++ if(TargetNetdev) { ++ DBG_871X("Force onboard module driver disappear !!!\n"); ++ TargetAdapter = rtw_netdev_priv(TargetNetdev); ++ TargetAdapter->DriverState = DRIVER_DISAPPEAR; ++ ++ padapter->pid[0] = TargetAdapter->pid[0]; ++ padapter->pid[1] = TargetAdapter->pid[1]; ++ padapter->pid[2] = TargetAdapter->pid[2]; ++ ++ dev_put(TargetNetdev); ++ unregister_netdev(TargetNetdev); ++ ++ if(TargetAdapter->chip_type == padapter->chip_type) ++ rtw_proc_remove_one(TargetNetdev); ++ ++ padapter->DriverState = DRIVER_REPLACE_DONGLE; ++ } ++ } ++#endif //CONFIG_EASY_REPLACEMENT ++ ++ if(dev_alloc_name(pnetdev, ifname) < 0) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("dev_alloc_name, fail! \n")); ++ } ++ ++ netif_carrier_off(pnetdev); ++ //rtw_netif_stop_queue(pnetdev); ++ ++ return 0; ++} ++ ++struct net_device *rtw_init_netdev(_adapter *old_padapter) ++{ ++ _adapter *padapter; ++ struct net_device *pnetdev; ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+init_net_dev\n")); ++ ++ if(old_padapter != NULL) ++ pnetdev = rtw_alloc_etherdev_with_old_priv(sizeof(_adapter), (void *)old_padapter); ++ else ++ pnetdev = rtw_alloc_etherdev(sizeof(_adapter)); ++ ++ if (!pnetdev) ++ return NULL; ++ ++ padapter = rtw_netdev_priv(pnetdev); ++ padapter->pnetdev = pnetdev; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ++ SET_MODULE_OWNER(pnetdev); ++#endif ++ ++ //pnetdev->init = NULL; ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++ DBG_871X("register rtw_netdev_ops to netdev_ops\n"); ++ pnetdev->netdev_ops = &rtw_netdev_ops; ++#else ++ pnetdev->open = netdev_open; ++ pnetdev->stop = netdev_close; ++ pnetdev->hard_start_xmit = rtw_xmit_entry; ++ pnetdev->set_mac_address = rtw_net_set_mac_address; ++ pnetdev->get_stats = rtw_net_get_stats; ++ pnetdev->do_ioctl = rtw_ioctl; ++#endif ++ ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ pnetdev->features |= NETIF_F_IP_CSUM; ++#endif ++ //pnetdev->tx_timeout = NULL; ++ pnetdev->watchdog_timeo = HZ*3; /* 3 second timeout */ ++#ifdef CONFIG_WIRELESS_EXT ++ pnetdev->wireless_handlers = (struct iw_handler_def *)&rtw_handlers_def; ++#endif ++ ++#ifdef WIRELESS_SPY ++ //priv->wireless_data.spy_data = &priv->spy_data; ++ //pnetdev->wireless_data = &priv->wireless_data; ++#endif ++ ++ //step 2. ++ loadparam(padapter, pnetdev); ++ ++ return pnetdev; ++ ++} ++ ++void rtw_unregister_netdevs(struct dvobj_priv *dvobj) ++{ ++ int i; ++ _adapter *padapter = NULL; ++ ++ for (i=0;iiface_nums;i++) { ++ struct net_device *pnetdev = NULL; ++ ++ padapter = dvobj->padapters[i]; ++ ++ if (padapter == NULL) ++ continue; ++ ++ pnetdev = padapter->pnetdev; ++ ++ if((padapter->DriverState != DRIVER_DISAPPEAR) && pnetdev) { ++ unregister_netdev(pnetdev); //will call netdev_close() ++ rtw_proc_remove_one(pnetdev); ++ } ++ ++ #ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_unregister(padapter->rtw_wdev); ++ #endif ++ } ++ ++} ++ ++u32 rtw_start_drv_threads(_adapter *padapter) ++{ ++ ++ u32 _status = _SUCCESS; ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_start_drv_threads\n")); ++#ifdef CONFIG_XMIT_THREAD_MODE ++ padapter->xmitThread = kthread_run(rtw_xmit_thread, padapter, "RTW_XMIT_THREAD"); ++ if(IS_ERR(padapter->xmitThread)) ++ _status = _FAIL; ++#endif ++ ++#ifdef CONFIG_RECV_THREAD_MODE ++ padapter->recvThread = kthread_run(rtw_recv_thread, padapter, "RTW_RECV_THREAD"); ++ if(IS_ERR(padapter->recvThread)) ++ _status = _FAIL; ++#endif ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->isprimary == _TRUE) ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ padapter->cmdThread = kthread_run(rtw_cmd_thread, padapter, "RTW_CMD_THREAD"); ++ if(IS_ERR(padapter->cmdThread)) ++ _status = _FAIL; ++ else ++ _rtw_down_sema(&padapter->cmdpriv.terminate_cmdthread_sema); //wait for cmd_thread to run ++ } ++ ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++ padapter->evtThread = kthread_run(event_thread, padapter, "RTW_EVENT_THREAD"); ++ if(IS_ERR(padapter->evtThread)) ++ _status = _FAIL; ++#endif ++ ++ return _status; ++ ++} ++ ++void rtw_stop_drv_threads (_adapter *padapter) ++{ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_stop_drv_threads\n")); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ if(padapter->isprimary == _TRUE) ++#endif //CONFIG_CONCURRENT_MODE ++ { ++ rtw_stop_cmd_thread(padapter); ++ } ++ ++#ifdef CONFIG_EVENT_THREAD_MODE ++ _rtw_up_sema(&padapter->evtpriv.evt_notify); ++ if(padapter->evtThread){ ++ _rtw_down_sema(&padapter->evtpriv.terminate_evtthread_sema); ++ } ++#endif ++ ++#ifdef CONFIG_XMIT_THREAD_MODE ++ // Below is to termindate tx_thread... ++ _rtw_up_sema(&padapter->xmitpriv.xmit_sema); ++ _rtw_down_sema(&padapter->xmitpriv.terminate_xmitthread_sema); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("\n drv_halt: rtw_xmit_thread can be terminated ! \n")); ++#endif ++ ++#ifdef CONFIG_RECV_THREAD_MODE ++ // Below is to termindate rx_thread... ++ _rtw_up_sema(&padapter->recvpriv.recv_sema); ++ _rtw_down_sema(&padapter->recvpriv.terminate_recvthread_sema); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("\n drv_halt:recv_thread can be terminated! \n")); ++#endif ++ ++ ++} ++ ++u8 rtw_init_default_value(_adapter *padapter); ++u8 rtw_init_default_value(_adapter *padapter) ++{ ++ u8 ret = _SUCCESS; ++ struct registry_priv* pregistrypriv = &padapter->registrypriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct mlme_priv *pmlmepriv= &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ ++ //xmit_priv ++ pxmitpriv->vcs_setting = pregistrypriv->vrtl_carrier_sense; ++ pxmitpriv->vcs = pregistrypriv->vcs_type; ++ pxmitpriv->vcs_type = pregistrypriv->vcs_type; ++ //pxmitpriv->rts_thresh = pregistrypriv->rts_thresh; ++ pxmitpriv->frag_len = pregistrypriv->frag_thresh; ++ ++ ++ ++ //recv_priv ++ ++ ++ //mlme_priv ++ pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec ++ pmlmepriv->scan_mode = SCAN_ACTIVE; ++ ++ //qos_priv ++ //pmlmepriv->qospriv.qos_option = pregistrypriv->wmm_enable; ++ ++ //ht_priv ++#ifdef CONFIG_80211N_HT ++ pmlmepriv->htpriv.ampdu_enable = _FALSE;//set to disabled ++#endif ++ ++ //security_priv ++ //rtw_get_encrypt_decrypt_from_registrypriv(padapter); ++ psecuritypriv->binstallGrpkey = _FAIL; ++ psecuritypriv->sw_encrypt=pregistrypriv->software_encrypt; ++ psecuritypriv->sw_decrypt=pregistrypriv->software_decrypt; ++ ++ psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; //open system ++ psecuritypriv->dot11PrivacyAlgrthm = _NO_PRIVACY_; ++ ++ psecuritypriv->dot11PrivacyKeyIndex = 0; ++ ++ psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_; ++ psecuritypriv->dot118021XGrpKeyid = 1; ++ ++ psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen; ++ psecuritypriv->ndisencryptstatus = Ndis802_11WEPDisabled; ++ ++ ++ //pwrctrl_priv ++ ++ ++ //registry_priv ++ rtw_init_registrypriv_dev_network(padapter); ++ rtw_update_registrypriv_dev_network(padapter); ++ ++ ++ //hal_priv ++ rtw_hal_def_value_init(padapter); ++ ++ //misc. ++ padapter->bReadPortCancel = _FALSE; ++ padapter->bWritePortCancel = _FALSE; ++ padapter->bRxRSSIDisplay = 0; ++ padapter->bForceWriteInitGain = 1; ++ padapter->bNotifyChannelChange = 0; ++#ifdef CONFIG_P2P ++ padapter->bShowGetP2PState = 1; ++#endif ++ return ret; ++} ++ ++struct dvobj_priv *devobj_init(void) ++{ ++ struct dvobj_priv *pdvobj = NULL; ++ ++ if ((pdvobj = (struct dvobj_priv*)rtw_zmalloc(sizeof(*pdvobj))) == NULL) ++ return NULL; ++ ++ _rtw_mutex_init(&pdvobj->hw_init_mutex); ++ _rtw_mutex_init(&pdvobj->h2c_fwcmd_mutex); ++ _rtw_mutex_init(&pdvobj->setch_mutex); ++ _rtw_mutex_init(&pdvobj->setbw_mutex); ++ ++ pdvobj->processing_dev_remove = _FALSE; ++ ++ return pdvobj; ++} ++ ++void devobj_deinit(struct dvobj_priv *pdvobj) ++{ ++ if(!pdvobj) ++ return; ++ ++ _rtw_mutex_free(&pdvobj->hw_init_mutex); ++ _rtw_mutex_free(&pdvobj->h2c_fwcmd_mutex); ++ _rtw_mutex_free(&pdvobj->setch_mutex); ++ _rtw_mutex_free(&pdvobj->setbw_mutex); ++ ++ rtw_mfree((u8*)pdvobj, sizeof(*pdvobj)); ++} ++ ++u8 rtw_reset_drv_sw(_adapter *padapter) ++{ ++ u8 ret8=_SUCCESS; ++ struct mlme_priv *pmlmepriv= &padapter->mlmepriv; ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++ //hal_priv ++ rtw_hal_def_value_init(padapter); ++ padapter->bReadPortCancel = _FALSE; ++ padapter->bWritePortCancel = _FALSE; ++ padapter->bRxRSSIDisplay = 0; ++ pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec ++ ++ pwrctrlpriv->bips_processing = _FALSE; ++ pwrctrlpriv->rf_pwrstate = rf_on; ++ ++ padapter->xmitpriv.tx_pkts = 0; ++ padapter->recvpriv.rx_pkts = 0; ++ ++ pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE; ++ ++ _clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY |_FW_UNDER_LINKING); ++ ++#ifdef CONFIG_AUTOSUSPEND ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34)) ++ adapter_to_dvobj(padapter)->pusbdev->autosuspend_disabled = 1;//autosuspend disabled by the user ++ #endif ++#endif ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++ rtw_hal_sreset_reset_value(padapter); ++#endif ++ pwrctrlpriv->pwr_state_check_cnts = 0; ++ ++ //mlmeextpriv ++ padapter->mlmeextpriv.sitesurvey_res.state= SCAN_DISABLE; ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ rtw_set_signal_stat_timer(&padapter->recvpriv); ++#endif ++ ++ return ret8; ++} ++ ++ ++u8 rtw_init_drv_sw(_adapter *padapter) ++{ ++ ++ u8 ret8=_SUCCESS; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_init_drv_sw\n")); ++ ++ if ((rtw_init_cmd_priv(&padapter->cmdpriv)) == _FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init cmd_priv\n")); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++ padapter->cmdpriv.padapter=padapter; ++ ++ if ((rtw_init_evt_priv(&padapter->evtpriv)) == _FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init evt_priv\n")); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++ ++ if (rtw_init_mlme_priv(padapter) == _FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init mlme_priv\n")); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++#ifdef CONFIG_P2P ++ rtw_init_wifidirect_timers(padapter); ++ init_wifidirect_info(padapter, P2P_ROLE_DISABLE); ++ reset_global_wifidirect_info(padapter); ++ #ifdef CONFIG_IOCTL_CFG80211 ++ rtw_init_cfg80211_wifidirect_info(padapter); ++ #endif ++#ifdef CONFIG_WFD ++ if(rtw_init_wifi_display_info(padapter) == _FAIL) ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init init_wifi_display_info\n")); ++#endif ++#endif /* CONFIG_P2P */ ++ ++ if(init_mlme_ext_priv(padapter) == _FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init mlme_ext_priv\n")); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++#ifdef CONFIG_TDLS ++ if(rtw_init_tdls_info(padapter) == _FAIL) ++ { ++ DBG_871X("Can't rtw_init_tdls_info\n"); ++ ret8=_FAIL; ++ goto exit; ++ } ++#endif //CONFIG_TDLS ++ ++ if(_rtw_init_xmit_priv(&padapter->xmitpriv, padapter) == _FAIL) ++ { ++ DBG_871X("Can't _rtw_init_xmit_priv\n"); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++ if(_rtw_init_recv_priv(&padapter->recvpriv, padapter) == _FAIL) ++ { ++ DBG_871X("Can't _rtw_init_recv_priv\n"); ++ ret8=_FAIL; ++ goto exit; ++ } ++ // add for CONFIG_IEEE80211W, none 11w also can use ++ _rtw_spinlock_init(&padapter->security_key_mutex); ++ ++ // We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc(). ++ //_rtw_memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv)); ++ ++ //_init_timer(&(padapter->securitypriv.tkip_timer), padapter->pifp, rtw_use_tkipkey_handler, padapter); ++ ++ if(_rtw_init_sta_priv(&padapter->stapriv) == _FAIL) ++ { ++ DBG_871X("Can't _rtw_init_sta_priv\n"); ++ ret8=_FAIL; ++ goto exit; ++ } ++ ++ padapter->stapriv.padapter = padapter; ++ padapter->setband = GHZ24_50; ++ rtw_init_bcmc_stainfo(padapter); ++ ++ rtw_init_pwrctrl_priv(padapter); ++ ++ //_rtw_memset((u8 *)&padapter->qospriv, 0, sizeof (struct qos_priv));//move to mlme_priv ++ ++#ifdef CONFIG_MP_INCLUDED ++ if (init_mp_priv(padapter) == _FAIL) { ++ DBG_871X("%s: initialize MP private data Fail!\n", __func__); ++ } ++#endif ++ ++ ret8 = rtw_init_default_value(padapter); ++ ++ rtw_hal_dm_init(padapter); ++ rtw_hal_sw_led_init(padapter); ++ ++#ifdef DBG_CONFIG_ERROR_DETECT ++ rtw_hal_sreset_init(padapter); ++#endif ++ ++#ifdef CONFIG_INTEL_WIDI ++ if(rtw_init_intel_widi(padapter) == _FAIL) ++ { ++ DBG_871X("Can't rtw_init_intel_widi\n"); ++ ret8=_FAIL; ++ goto exit; ++ } ++#endif //CONFIG_INTEL_WIDI ++ ++#ifdef CONFIG_BR_EXT ++ _rtw_spinlock_init(&padapter->br_ext_lock); ++#endif // CONFIG_BR_EXT ++ ++exit: ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("-rtw_init_drv_sw\n")); ++ ++ _func_exit_; ++ ++ return ret8; ++ ++} ++ ++void rtw_cancel_all_timer(_adapter *padapter) ++{ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_cancel_all_timer\n")); ++ ++ _cancel_timer_ex(&padapter->mlmepriv.assoc_timer); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel association timer complete! \n")); ++ ++ //_cancel_timer_ex(&padapter->securitypriv.tkip_timer); ++ //RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel tkip_timer! \n")); ++ ++ _cancel_timer_ex(&padapter->mlmepriv.scan_to_timer); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel scan_to_timer! \n")); ++ ++ _cancel_timer_ex(&padapter->mlmepriv.dynamic_chk_timer); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel dynamic_chk_timer! \n")); ++ ++ // cancel sw led timer ++ rtw_hal_sw_led_deinit(padapter); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel DeInitSwLeds! \n")); ++ ++ _cancel_timer_ex(&padapter->pwrctrlpriv.pwr_state_check_timer); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++#ifdef CONFIG_P2P ++ _cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer); ++#endif //CONFIG_P2P ++#endif //CONFIG_IOCTL_CFG80211 ++ ++#ifdef CONFIG_SET_SCAN_DENY_TIMER ++ _cancel_timer_ex(&padapter->mlmepriv.set_scan_deny_timer); ++ rtw_clear_scan_deny(padapter); ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel set_scan_deny_timer! \n")); ++#endif ++ ++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS ++ _cancel_timer_ex(&padapter->recvpriv.signal_stat_timer); ++#endif ++ ++ // cancel dm timer ++ rtw_hal_dm_deinit(padapter); ++ ++#ifdef CONFIG_PLATFORM_FS_MX61 ++ msleep(50); ++#endif ++} ++ ++u8 rtw_free_drv_sw(_adapter *padapter) ++{ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("==>rtw_free_drv_sw")); ++ ++ ++ //we can call rtw_p2p_enable here, but: ++ // 1. rtw_p2p_enable may have IO operation ++ // 2. rtw_p2p_enable is bundled with wext interface ++ #ifdef CONFIG_P2P ++ { ++ struct wifidirect_info *pwdinfo = &padapter->wdinfo; ++ if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) ++ { ++ _cancel_timer_ex( &pwdinfo->find_phase_timer ); ++ _cancel_timer_ex( &pwdinfo->restore_p2p_state_timer ); ++ _cancel_timer_ex( &pwdinfo->pre_tx_scan_timer); ++#ifdef CONFIG_CONCURRENT_MODE ++ _cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer ); ++#endif // CONFIG_CONCURRENT_MODE ++ rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE); ++ } ++ } ++ #endif ++ // add for CONFIG_IEEE80211W, none 11w also can use ++ _rtw_spinlock_free(&padapter->security_key_mutex); ++ ++#ifdef CONFIG_BR_EXT ++ _rtw_spinlock_free(&padapter->br_ext_lock); ++#endif // CONFIG_BR_EXT ++ ++#ifdef CONFIG_INTEL_WIDI ++ rtw_free_intel_widi(padapter); ++#endif //CONFIG_INTEL_WIDI ++ ++ free_mlme_ext_priv(&padapter->mlmeextpriv); ++ ++#ifdef CONFIG_TDLS ++ //rtw_free_tdls_info(&padapter->tdlsinfo); ++#endif //CONFIG_TDLS ++ ++ rtw_free_cmd_priv(&padapter->cmdpriv); ++ ++ rtw_free_evt_priv(&padapter->evtpriv); ++ ++ rtw_free_mlme_priv(&padapter->mlmepriv); ++ ++ //free_io_queue(padapter); ++ ++ _rtw_free_xmit_priv(&padapter->xmitpriv); ++ ++ _rtw_free_sta_priv(&padapter->stapriv); //will free bcmc_stainfo here ++ ++ _rtw_free_recv_priv(&padapter->recvpriv); ++ ++ rtw_free_pwrctrl_priv(padapter); ++ ++ //rtw_mfree((void *)padapter, sizeof (padapter)); ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ free_drvext(&padapter->drvextpriv); ++#endif ++ ++ rtw_hal_free_data(padapter); ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("<==rtw_free_drv_sw\n")); ++ ++ //free the old_pnetdev ++ if(padapter->rereg_nd_name_priv.old_pnetdev) { ++ free_netdev(padapter->rereg_nd_name_priv.old_pnetdev); ++ padapter->rereg_nd_name_priv.old_pnetdev = NULL; ++ } ++ ++ // clear pbuddy_adapter to avoid access wrong pointer. ++ if(padapter->pbuddy_adapter != NULL) ++ { ++ padapter->pbuddy_adapter->pbuddy_adapter = NULL; ++ } ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("-rtw_free_drv_sw\n")); ++ ++ return _SUCCESS; ++ ++} ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_USB_HCI ++ #include ++#endif ++ ++#ifdef CONFIG_MULTI_VIR_IFACES ++int _netdev_vir_if_open(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ _adapter *primary_padapter = GET_PRIMARY_ADAPTER(padapter); ++ ++ DBG_871X(FUNC_NDEV_FMT" enter\n", FUNC_NDEV_ARG(pnetdev)); ++ ++ if(!primary_padapter) ++ goto _netdev_virtual_iface_open_error; ++ ++ if(primary_padapter->bup == _FALSE || primary_padapter->hw_init_completed == _FALSE) ++ { ++ _netdev_open(primary_padapter->pnetdev); ++ } ++ ++ if(padapter->bup == _FALSE && primary_padapter->bup == _TRUE && ++ primary_padapter->hw_init_completed == _TRUE) ++ { ++ int i; ++ ++ padapter->bDriverStopped = _FALSE; ++ padapter->bSurpriseRemoved = _FALSE; ++ padapter->bCardDisableWOHSM = _FALSE; ++ ++ _rtw_memcpy(padapter->HalData, primary_padapter->HalData, padapter->hal_data_sz); ++ ++ padapter->bFWReady = primary_padapter->bFWReady; ++ ++ if(rtw_start_drv_threads(padapter) == _FAIL) ++ { ++ goto _netdev_virtual_iface_open_error; ++ } ++ ++ padapter->dir_dev = NULL; ++ rtw_proc_init_one(pnetdev); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_init_wiphy(padapter); ++#endif ++ ++ padapter->bup = _TRUE; ++ padapter->hw_init_completed = _TRUE; ++ ++ rtw_start_mbssid_cam(padapter);//start mbssid_cam after bup = _TRUE & hw_init_completed = _TRUE ++ ++ } ++ ++ padapter->net_closed = _FALSE; ++ ++ _set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000); ++ ++ if(!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_start_queue(pnetdev); ++ else ++ rtw_netif_wake_queue(pnetdev); ++ ++ ++ DBG_871X(FUNC_NDEV_FMT" exit\n", FUNC_NDEV_ARG(pnetdev)); ++ return 0; ++ ++_netdev_virtual_iface_open_error: ++ ++ padapter->bup = _FALSE; ++ ++ netif_carrier_off(pnetdev); ++ rtw_netif_stop_queue(pnetdev); ++ ++ return (-1); ++ ++} ++ ++int netdev_vir_if_open(struct net_device *pnetdev) ++{ ++ int ret; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ ret = _netdev_vir_if_open(pnetdev); ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ return ret; ++} ++ ++static int netdev_vir_if_close(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ padapter->net_closed = _TRUE; ++ ++ if(pnetdev) ++ { ++ if (!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_stop_queue(pnetdev); ++ } ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_scan_abort(padapter); ++ wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE; ++#endif ++ ++ return 0; ++} ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++static const struct net_device_ops rtw_netdev_vir_if_ops = { ++ .ndo_open = netdev_vir_if_open, ++ .ndo_stop = netdev_vir_if_close, ++ .ndo_start_xmit = rtw_xmit_entry, ++ .ndo_set_mac_address = rtw_net_set_mac_address, ++ .ndo_get_stats = rtw_net_get_stats, ++ .ndo_do_ioctl = rtw_ioctl, ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ .ndo_select_queue = rtw_select_queue, ++#endif ++}; ++#endif ++ ++_adapter *rtw_drv_add_vir_if(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops)) ++{ ++ ++ int res = _FAIL; ++ struct net_device *pnetdev=NULL; ++ _adapter *padapter = NULL; ++ struct dvobj_priv *pdvobjpriv; ++ u8 mac[ETH_ALEN]; ++ ++/* ++ if((primary_padapter->bup == _FALSE) || ++ (rtw_buddy_adapter_up(primary_padapter) == _FALSE)) ++ { ++ goto error_rtw_drv_add_iface; ++ } ++ ++*/ ++ /****** init netdev ******/ ++ pnetdev = rtw_init_netdev(NULL); ++ if (!pnetdev) ++ goto error_rtw_drv_add_iface; ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++ DBG_871X("register rtw_netdev_virtual_iface_ops to netdev_ops\n"); ++ pnetdev->netdev_ops = &rtw_netdev_vir_if_ops; ++#else ++ pnetdev->open = netdev_vir_if_open; ++ pnetdev->stop = netdev_vir_if_close; ++#endif ++ ++#ifdef CONFIG_NO_WIRELESS_HANDLERS ++ pnetdev->wireless_handlers = NULL; ++#endif ++ ++ /****** init adapter ******/ ++ padapter = rtw_netdev_priv(pnetdev); ++ _rtw_memcpy(padapter, primary_padapter, sizeof(_adapter)); ++ ++ // ++ padapter->bup = _FALSE; ++ padapter->net_closed = _TRUE; ++ padapter->hw_init_completed = _FALSE; ++ ++ ++ //set adapter_type/iface type ++ padapter->isprimary = _FALSE; ++ padapter->adapter_type = MAX_ADAPTER; ++ padapter->pbuddy_adapter = primary_padapter; ++#if 0 ++#ifndef CONFIG_HWPORT_SWAP //Port0 -> Pri , Port1 -> Sec ++ padapter->iface_type = IFACE_PORT1; ++#else ++ padapter->iface_type = IFACE_PORT0; ++#endif //CONFIG_HWPORT_SWAP ++#else ++ //extended virtual interfaces always are set to port0 ++ padapter->iface_type = IFACE_PORT0; ++#endif ++ // ++ padapter->pnetdev = pnetdev; ++ ++ /****** setup dvobj ******/ ++ pdvobjpriv = adapter_to_dvobj(padapter); ++ padapter->iface_id = pdvobjpriv->iface_nums; ++ pdvobjpriv->padapters[pdvobjpriv->iface_nums++] = padapter; ++ ++ SET_NETDEV_DEV(pnetdev, dvobj_to_dev(pdvobjpriv)); ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_alloc(padapter, dvobj_to_dev(pdvobjpriv)); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ //set interface_type/chip_type/HardwareType ++ padapter->interface_type = primary_padapter->interface_type; ++ padapter->chip_type = primary_padapter->chip_type; ++ padapter->HardwareType = primary_padapter->HardwareType; ++ ++ //set hal data & hal ops ++#if defined(CONFIG_RTL8192C) ++ #if defined(CONFIG_PCI_HCI) ++ rtl8192ce_set_hal_ops(padapter); ++ #elif defined(CONFIG_USB_HCI) ++ rtl8192cu_set_hal_ops(padapter); ++ #endif ++#elif defined(CONFIG_RTL8192D) ++ #if defined(CONFIG_PCI_HCI) ++ rtl8192de_set_hal_ops(padapter); ++ #elif defined(CONFIG_USB_HCI) ++ rtl8192du_set_hal_ops(padapter); ++ #endif ++#endif ++ ++ padapter->HalFunc.inirp_init = NULL; ++ padapter->HalFunc.inirp_deinit = NULL; ++ padapter->intf_start = NULL; ++ padapter->intf_stop = NULL; ++ ++ //step init_io_priv ++ if ((rtw_init_io_priv(padapter, set_intf_ops)) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n")); ++ } ++ ++ //step read_chip_version ++ rtw_hal_read_chip_version(padapter); ++ ++ //step usb endpoint mapping ++ rtw_hal_chip_configure(padapter); ++ ++ ++ //init drv data ++ if(rtw_init_drv_sw(padapter)!= _SUCCESS) ++ goto error_rtw_drv_add_iface; ++ ++ ++ //get mac address from primary_padapter ++ _rtw_memcpy(mac, primary_padapter->eeprompriv.mac_addr, ETH_ALEN); ++ ++ if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) && ++ (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) || ++ ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) && ++ (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0))) ++ { ++ mac[0] = 0x00; ++ mac[1] = 0xe0; ++ mac[2] = 0x4c; ++ mac[3] = 0x87; ++ mac[4] = 0x11; ++ mac[5] = 0x22; ++ } ++ else ++ { ++ //If the BIT1 is 0, the address is universally administered. ++ //If it is 1, the address is locally administered ++#if 1 //needs enable MBSSID CAM ++ mac[0] |= BIT(1); // locally administered ++ mac[0] |= (padapter->iface_id-1)<<4; ++#endif ++ } ++ ++ _rtw_memcpy(padapter->eeprompriv.mac_addr, mac, ETH_ALEN); ++ ++ padapter->dir_dev = NULL; ++ ++ res = _SUCCESS; ++ ++ return padapter; ++ ++ ++error_rtw_drv_add_iface: ++ ++ if(padapter) ++ rtw_free_drv_sw(padapter); ++ ++ if (pnetdev) ++ rtw_free_netdev(pnetdev); ++ ++ return NULL; ++ ++} ++ ++void rtw_drv_stop_vir_if(_adapter *padapter) ++{ ++ struct net_device *pnetdev=NULL; ++ ++ if (padapter == NULL) ++ return; ++ ++ pnetdev = padapter->pnetdev; ++ ++ rtw_cancel_all_timer(padapter); ++ ++ if(padapter->bup == _TRUE) ++ { ++ padapter->bDriverStopped = _TRUE; ++ ++ #ifdef CONFIG_XMIT_ACK ++ if (padapter->xmitpriv.ack_tx) ++ rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP); ++ #endif ++ ++ if(padapter->intf_stop) ++ { ++ padapter->intf_stop(padapter); ++ } ++ ++ rtw_stop_drv_threads(padapter); ++ ++ padapter->bup = _FALSE; ++ } ++} ++ ++void rtw_drv_free_vir_if(_adapter *padapter) ++{ ++ struct net_device *pnetdev=NULL; ++ ++ if (padapter == NULL) ++ return; ++ ++ padapter->pbuddy_adapter = NULL; ++ ++ pnetdev = padapter->pnetdev; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_free(padapter->rtw_wdev); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ rtw_free_drv_sw(padapter); ++ ++ rtw_free_netdev(pnetdev); ++} ++ ++void rtw_drv_stop_vir_ifaces(struct dvobj_priv *dvobj) ++{ ++ int i; ++ //struct dvobj_priv *dvobj = primary_padapter->dvobj; ++ ++ for(i=2;iiface_nums;i++) ++ { ++ rtw_drv_stop_vir_if(dvobj->padapters[i]); ++ } ++} ++ ++void rtw_drv_free_vir_ifaces(struct dvobj_priv *dvobj) ++{ ++ int i; ++ //struct dvobj_priv *dvobj = primary_padapter->dvobj; ++ ++ for(i=2;iiface_nums;i++) ++ { ++ rtw_drv_free_vir_if(dvobj->padapters[i]); ++ } ++} ++ ++void rtw_drv_del_vir_if(_adapter *padapter) ++{ ++ rtw_drv_stop_vir_if(padapter); ++ rtw_drv_free_vir_if(padapter); ++} ++ ++void rtw_drv_del_vir_ifaces(_adapter *primary_padapter) ++{ ++ int i; ++ struct dvobj_priv *dvobj = primary_padapter->dvobj; ++ ++ for(i=2;iiface_nums;i++) ++ { ++ rtw_drv_del_vir_if(dvobj->padapters[i]); ++ } ++} ++#endif //CONFIG_MULTI_VIR_IFACES ++ ++int _netdev_if2_open(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ _adapter *primary_padapter = padapter->pbuddy_adapter; ++ ++ DBG_871X("+871x_drv - if2_open, bup=%d\n", padapter->bup); ++ ++ if(primary_padapter->bup == _FALSE || primary_padapter->hw_init_completed == _FALSE) ++ { ++ _netdev_open(primary_padapter->pnetdev); ++ } ++ ++ if(padapter->bup == _FALSE && primary_padapter->bup == _TRUE && ++ primary_padapter->hw_init_completed == _TRUE) ++ { ++ int i; ++ ++ padapter->bDriverStopped = _FALSE; ++ padapter->bSurpriseRemoved = _FALSE; ++ padapter->bCardDisableWOHSM = _FALSE; ++ ++ _rtw_memcpy(padapter->HalData, primary_padapter->HalData, padapter->hal_data_sz); ++ ++ padapter->bFWReady = primary_padapter->bFWReady; ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_DM_INIT_PWDB, NULL); ++ ++ //if (init_mlme_ext_priv(padapter) == _FAIL) ++ // goto netdev_if2_open_error; ++ ++ ++ if(rtw_start_drv_threads(padapter) == _FAIL) ++ { ++ goto netdev_if2_open_error; ++ } ++ ++ ++ if(padapter->intf_start) ++ { ++ padapter->intf_start(padapter); ++ } ++ ++ ++ padapter->hw_init_completed = _TRUE; ++ ++ padapter->dir_dev = NULL; ++ rtw_proc_init_one(pnetdev); ++ ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_init_wiphy(padapter); ++#endif ++ ++ padapter->bup = _TRUE; ++ ++ } ++ ++ padapter->net_closed = _FALSE; ++ ++ _set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000); ++ ++ if(!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_start_queue(pnetdev); ++ else ++ rtw_netif_wake_queue(pnetdev); ++ ++ DBG_871X("-871x_drv - if2_open, bup=%d\n", padapter->bup); ++ return 0; ++ ++netdev_if2_open_error: ++ ++ padapter->bup = _FALSE; ++ ++ netif_carrier_off(pnetdev); ++ rtw_netif_stop_queue(pnetdev); ++ ++ return (-1); ++ ++} ++ ++int netdev_if2_open(struct net_device *pnetdev) ++{ ++ int ret; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ ret = _netdev_if2_open(pnetdev); ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ return ret; ++} ++ ++static int netdev_if2_close(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ padapter->net_closed = _TRUE; ++ ++ if(pnetdev) ++ { ++ if (!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_stop_queue(pnetdev); ++ } ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_scan_abort(padapter); ++ wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE; ++#endif ++ ++ return 0; ++} ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++static const struct net_device_ops rtw_netdev_if2_ops = { ++ .ndo_open = netdev_if2_open, ++ .ndo_stop = netdev_if2_close, ++ .ndo_start_xmit = rtw_xmit_entry, ++ .ndo_set_mac_address = rtw_net_set_mac_address, ++ .ndo_get_stats = rtw_net_get_stats, ++ .ndo_do_ioctl = rtw_ioctl, ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ .ndo_select_queue = rtw_select_queue, ++#endif ++}; ++#endif ++ ++_adapter *rtw_drv_if2_init(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops)) ++{ ++ int res = _FAIL; ++ struct net_device *pnetdev = NULL; ++ _adapter *padapter = NULL; ++ struct dvobj_priv *pdvobjpriv; ++ u8 mac[ETH_ALEN]; ++ ++ /****** init netdev ******/ ++ pnetdev = rtw_init_netdev(NULL); ++ if (!pnetdev) ++ goto error_rtw_drv_if2_init; ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) ++ DBG_871X("register rtw_netdev_if2_ops to netdev_ops\n"); ++ pnetdev->netdev_ops = &rtw_netdev_if2_ops; ++#else ++ pnetdev->open = netdev_if2_open; ++ pnetdev->stop = netdev_if2_close; ++#endif ++ ++#ifdef CONFIG_NO_WIRELESS_HANDLERS ++ pnetdev->wireless_handlers = NULL; ++#endif ++ ++ /****** init adapter ******/ ++ padapter = rtw_netdev_priv(pnetdev); ++ _rtw_memcpy(padapter, primary_padapter, sizeof(_adapter)); ++ ++ // ++ padapter->bup = _FALSE; ++ padapter->net_closed = _TRUE; ++ padapter->hw_init_completed = _FALSE; ++ ++ //set adapter_type/iface type ++ padapter->isprimary = _FALSE; ++ padapter->adapter_type = SECONDARY_ADAPTER; ++ padapter->pbuddy_adapter = primary_padapter; ++ padapter->iface_id = IFACE_ID1; ++#ifndef CONFIG_HWPORT_SWAP //Port0 -> Pri , Port1 -> Sec ++ padapter->iface_type = IFACE_PORT1; ++#else ++ padapter->iface_type = IFACE_PORT0; ++#endif //CONFIG_HWPORT_SWAP ++ // ++ padapter->pnetdev = pnetdev; ++ ++ /****** setup dvobj ******/ ++ pdvobjpriv = adapter_to_dvobj(padapter); ++ pdvobjpriv->if2 = padapter; ++ pdvobjpriv->padapters[pdvobjpriv->iface_nums++] = padapter; ++ ++ SET_NETDEV_DEV(pnetdev, dvobj_to_dev(pdvobjpriv)); ++ #ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_alloc(padapter, dvobj_to_dev(pdvobjpriv)); ++ #endif //CONFIG_IOCTL_CFG80211 ++ ++ //set interface_type/chip_type/HardwareType ++ padapter->interface_type = primary_padapter->interface_type; ++ padapter->chip_type = primary_padapter->chip_type; ++ padapter->HardwareType = primary_padapter->HardwareType; ++ ++ //set hal data & hal ops ++#if defined(CONFIG_RTL8192C) ++ #if defined(CONFIG_PCI_HCI) ++ rtl8192ce_set_hal_ops(padapter); ++ #elif defined(CONFIG_USB_HCI) ++ rtl8192cu_set_hal_ops(padapter); ++ #endif ++#elif defined(CONFIG_RTL8192D) ++ #if defined(CONFIG_PCI_HCI) ++ rtl8192de_set_hal_ops(padapter); ++ #elif defined(CONFIG_USB_HCI) ++ rtl8192du_set_hal_ops(padapter); ++ #endif ++#endif ++ ++ padapter->HalFunc.inirp_init = NULL; ++ padapter->HalFunc.inirp_deinit = NULL; ++ ++ // ++ padapter->intf_start = primary_padapter->intf_start; ++ padapter->intf_stop = primary_padapter->intf_stop; ++ ++ //step init_io_priv ++ if ((rtw_init_io_priv(padapter, set_intf_ops)) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n")); ++ } ++ ++ //step read_chip_version ++ rtw_hal_read_chip_version(padapter); ++ ++ //step usb endpoint mapping ++ rtw_hal_chip_configure(padapter); ++ ++ ++ //init drv data ++ if(rtw_init_drv_sw(padapter)!= _SUCCESS) ++ goto error_rtw_drv_if2_init; ++ ++ //get mac address from primary_padapter ++ _rtw_memcpy(mac, primary_padapter->eeprompriv.mac_addr, ETH_ALEN); ++ ++ if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) && ++ (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) || ++ ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) && ++ (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0))) ++ { ++ mac[0] = 0x00; ++ mac[1] = 0xe0; ++ mac[2] = 0x4c; ++ mac[3] = 0x87; ++ mac[4] = 0x11; ++ mac[5] = 0x22; ++ } ++ else ++ { ++ //If the BIT1 is 0, the address is universally administered. ++ //If it is 1, the address is locally administered ++ mac[0] |= BIT(1); // locally administered ++ ++ } ++ ++ _rtw_memcpy(padapter->eeprompriv.mac_addr, mac, ETH_ALEN); ++ rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr); ++ ++ primary_padapter->pbuddy_adapter = padapter; ++ ++ padapter->dir_dev = NULL; ++ ++ res = _SUCCESS; ++ ++ return padapter; ++ ++ ++error_rtw_drv_if2_init: ++ ++ if(padapter) ++ rtw_free_drv_sw(padapter); ++ ++ if (pnetdev) ++ rtw_free_netdev(pnetdev); ++ ++ return NULL; ++ ++} ++ ++void rtw_drv_if2_free(_adapter *if2) ++{ ++ _adapter *padapter = if2; ++ struct net_device *pnetdev = NULL; ++ ++ if (padapter == NULL) ++ return; ++ ++ pnetdev = padapter->pnetdev; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_free(padapter->rtw_wdev); ++#endif /* CONFIG_IOCTL_CFG80211 */ ++ ++ ++ rtw_free_drv_sw(padapter); ++ ++ rtw_free_netdev(pnetdev); ++ ++} ++ ++void rtw_drv_if2_stop(_adapter *if2) ++{ ++ _adapter *padapter = if2; ++ ++ if (padapter == NULL) ++ return; ++ ++ rtw_cancel_all_timer(padapter); ++ ++ if (padapter->bup == _TRUE) { ++ padapter->bDriverStopped = _TRUE; ++ #ifdef CONFIG_XMIT_ACK ++ if (padapter->xmitpriv.ack_tx) ++ rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP); ++ #endif ++ ++ if(padapter->intf_stop) ++ { ++ padapter->intf_stop(padapter); ++ } ++ ++ rtw_stop_drv_threads(padapter); ++ ++ padapter->bup = _FALSE; ++ } ++} ++#endif //end of CONFIG_CONCURRENT_MODE ++ ++#ifdef CONFIG_BR_EXT ++void netdev_br_init(struct net_device *netdev) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(netdev); ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++#endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ ++ //if(check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ++ { ++ //struct net_bridge *br = netdev->br_port->br;//->dev->dev_addr; ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ if (netdev->br_port) ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ if (rcu_dereference(adapter->pnetdev->rx_handler_data)) ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ { ++ struct net_device *br_netdev; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ br_netdev = dev_get_by_name(CONFIG_BR_EXT_BRNAME); ++#else // (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ struct net *devnet = NULL; ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++ devnet = netdev->nd_net; ++#else // (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++ devnet = dev_net(netdev); ++#endif // (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) ++ ++ br_netdev = dev_get_by_name(devnet, CONFIG_BR_EXT_BRNAME); ++#endif // (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) ++ ++ if (br_netdev) { ++ memcpy(adapter->br_mac, br_netdev->dev_addr, ETH_ALEN); ++ dev_put(br_netdev); ++ } else ++ printk("%s()-%d: dev_get_by_name(%s) failed!", __FUNCTION__, __LINE__, CONFIG_BR_EXT_BRNAME); ++ } ++ ++ adapter->ethBrExtInfo.addPPPoETag = 1; ++ } ++ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35)) ++} ++#endif //CONFIG_BR_EXT ++ ++static int _rtw_drv_register_netdev(_adapter *padapter, char *name) ++{ ++ int ret = _SUCCESS; ++ struct net_device *pnetdev = padapter->pnetdev; ++ ++ /* alloc netdev name */ ++ rtw_init_netdev_name(pnetdev, name); ++ ++ _rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN); ++ ++ /* Tell the network stack we exist */ ++ if (register_netdev(pnetdev) != 0) { ++ DBG_871X(FUNC_NDEV_FMT "Failed!\n", FUNC_NDEV_ARG(pnetdev)); ++ ret = _FAIL; ++ goto error_register_netdev; ++ } ++ ++ DBG_871X("%s, MAC Address (if%d) = " MAC_FMT "\n", __FUNCTION__, (padapter->iface_id+1), MAC_ARG(pnetdev->dev_addr)); ++ ++ return ret; ++ ++error_register_netdev: ++ ++ if(padapter->iface_id > IFACE_ID0) ++ { ++ rtw_free_drv_sw(padapter); ++ ++ rtw_free_netdev(pnetdev); ++ } ++ ++ return ret; ++} ++ ++int rtw_drv_register_netdev(_adapter *if1) ++{ ++ int i, status = _SUCCESS; ++ struct dvobj_priv *dvobj = if1->dvobj; ++ ++ if(dvobj->iface_nums < IFACE_ID_MAX) ++ { ++ for(i=0; iiface_nums; i++) ++ { ++ _adapter *padapter = dvobj->padapters[i]; ++ ++ if(padapter) ++ { ++ char *name; ++ ++ if(padapter->iface_id == IFACE_ID0) ++ name = if1->registrypriv.ifname; ++ else if(padapter->iface_id == IFACE_ID1) ++ name = if1->registrypriv.if2name; ++ else ++ name = "wlan%d"; ++ ++ if((status = _rtw_drv_register_netdev(padapter, name)) != _SUCCESS) { ++ break; ++ } ++ } ++ } ++ } ++ ++ return status; ++} ++ ++int _netdev_open(struct net_device *pnetdev) ++{ ++ uint status; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv; ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - dev_open\n")); ++ DBG_871X("+871x_drv - drv_open, bup=%d\n", padapter->bup); ++ ++ if(pwrctrlpriv->ps_flag == _TRUE){ ++ padapter->net_closed = _FALSE; ++ goto netdev_open_normal_process; ++ } ++ ++ if(padapter->bup == _FALSE) ++ { ++ padapter->bDriverStopped = _FALSE; ++ padapter->bSurpriseRemoved = _FALSE; ++ padapter->bCardDisableWOHSM = _FALSE; ++ ++ status = rtw_hal_init(padapter); ++ if (status ==_FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("rtl871x_hal_init(): Can't init h/w!\n")); ++ goto netdev_open_error; ++ } ++ ++ DBG_871X("MAC Address = "MAC_FMT"\n", MAC_ARG(pnetdev->dev_addr)); ++ ++ ++ status=rtw_start_drv_threads(padapter); ++ if(status ==_FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n")); ++ goto netdev_open_error; ++ } ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ init_drvext(padapter); ++#endif ++ ++ if(padapter->intf_start) ++ { ++ padapter->intf_start(padapter); ++ } ++ ++#ifndef RTK_DMP_PLATFORM ++ rtw_proc_init_one(pnetdev); ++#endif ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_cfg80211_init_wiphy(padapter); ++#endif ++ ++ rtw_led_control(padapter, LED_CTL_NO_LINK); ++ ++ padapter->bup = _TRUE; ++ } ++ padapter->net_closed = _FALSE; ++ ++ _set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000); ++ ++ padapter->pwrctrlpriv.bips_processing = _FALSE; ++ rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv); ++ ++ //netif_carrier_on(pnetdev);//call this func when rtw_joinbss_event_callback return success ++ if(!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_start_queue(pnetdev); ++ else ++ rtw_netif_wake_queue(pnetdev); ++ ++#ifdef CONFIG_BR_EXT ++ netdev_br_init(pnetdev); ++#endif // CONFIG_BR_EXT ++ ++netdev_open_normal_process: ++ ++ #ifdef CONFIG_CONCURRENT_MODE ++ { ++ _adapter *sec_adapter = padapter->pbuddy_adapter; ++ if(sec_adapter && (sec_adapter->bup == _FALSE || sec_adapter->hw_init_completed == _FALSE)) ++ _netdev_if2_open(sec_adapter->pnetdev); ++ } ++ #endif ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - dev_open\n")); ++ DBG_871X("-871x_drv - drv_open, bup=%d\n", padapter->bup); ++ ++ return 0; ++ ++netdev_open_error: ++ ++ padapter->bup = _FALSE; ++ ++ netif_carrier_off(pnetdev); ++ rtw_netif_stop_queue(pnetdev); ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("-871x_drv - dev_open, fail!\n")); ++ DBG_871X("-871x_drv - drv_open fail, bup=%d\n", padapter->bup); ++ ++ return (-1); ++ ++} ++ ++int netdev_open(struct net_device *pnetdev) ++{ ++ int ret; ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ _enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ ret = _netdev_open(pnetdev); ++ _exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL); ++ ++ return ret; ++} ++ ++#ifdef CONFIG_IPS ++int ips_netdrv_open(_adapter *padapter) ++{ ++ int status = _SUCCESS; ++ padapter->net_closed = _FALSE; ++ DBG_871X("===> %s.........\n",__FUNCTION__); ++ ++ ++ padapter->bDriverStopped = _FALSE; ++ padapter->bCardDisableWOHSM = _FALSE; ++ //padapter->bup = _TRUE; ++ ++ status = rtw_hal_init(padapter); ++ if (status ==_FAIL) ++ { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("ips_netdrv_open(): Can't init h/w!\n")); ++ goto netdev_open_error; ++ } ++ ++ if(padapter->intf_start) ++ { ++ padapter->intf_start(padapter); ++ } ++ ++ rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv); ++ _set_timer(&padapter->mlmepriv.dynamic_chk_timer,5000); ++ ++ return _SUCCESS; ++ ++netdev_open_error: ++ //padapter->bup = _FALSE; ++ DBG_871X("-ips_netdrv_open - drv_open failure, bup=%d\n", padapter->bup); ++ ++ return _FAIL; ++} ++ ++ ++int rtw_ips_pwr_up(_adapter *padapter) ++{ ++ int result; ++ u32 start_time = rtw_get_current_time(); ++ DBG_871X("===> rtw_ips_pwr_up..............\n"); ++ rtw_reset_drv_sw(padapter); ++ ++ result = ips_netdrv_open(padapter); ++ ++ rtw_led_control(padapter, LED_CTL_NO_LINK); ++ ++ DBG_871X("<=== rtw_ips_pwr_up.............. in %dms\n", rtw_get_passing_time_ms(start_time)); ++ return result; ++ ++} ++ ++void rtw_ips_pwr_down(_adapter *padapter) ++{ ++ u32 start_time = rtw_get_current_time(); ++ DBG_871X("===> rtw_ips_pwr_down...................\n"); ++ ++ padapter->bCardDisableWOHSM = _TRUE; ++ padapter->net_closed = _TRUE; ++ ++ rtw_led_control(padapter, LED_CTL_POWER_OFF); ++ ++ rtw_ips_dev_unload(padapter); ++ padapter->bCardDisableWOHSM = _FALSE; ++ DBG_871X("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time)); ++} ++#endif ++void rtw_ips_dev_unload(_adapter *padapter) ++{ ++ struct net_device *pnetdev= (struct net_device*)padapter->pnetdev; ++ struct xmit_priv *pxmitpriv = &(padapter->xmitpriv); ++ DBG_871X("====> %s...\n",__FUNCTION__); ++ ++ rtw_hal_set_hwreg(padapter, HW_VAR_FIFO_CLEARN_UP, 0); ++ ++ if(padapter->intf_stop) ++ { ++ padapter->intf_stop(padapter); ++ } ++ ++ //s5. ++ if(padapter->bSurpriseRemoved == _FALSE) ++ { ++ rtw_hal_deinit(padapter); ++ } ++ ++} ++ ++int pm_netdev_open(struct net_device *pnetdev,u8 bnormal) ++{ ++ int status; ++ if(bnormal) ++ status = netdev_open(pnetdev); ++#ifdef CONFIG_IPS ++ else ++ status = (_SUCCESS == ips_netdrv_open((_adapter *)rtw_netdev_priv(pnetdev)))?(0):(-1); ++#endif ++ ++ return status; ++} ++ ++static int netdev_close(struct net_device *pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - drv_close\n")); ++ ++ if(padapter->pwrctrlpriv.bInternalAutoSuspend == _TRUE) ++ { ++ //rtw_pwr_wakeup(padapter); ++ if(padapter->pwrctrlpriv.rf_pwrstate == rf_off) ++ padapter->pwrctrlpriv.ps_flag = _TRUE; ++ } ++ padapter->net_closed = _TRUE; ++ ++/* if(!padapter->hw_init_completed) ++ { ++ DBG_871X("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed); ++ ++ padapter->bDriverStopped = _TRUE; ++ ++ rtw_dev_unload(padapter); ++ } ++ else*/ ++ if(padapter->pwrctrlpriv.rf_pwrstate == rf_on){ ++ DBG_871X("(2)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed); ++ ++ //s1. ++ if(pnetdev) ++ { ++ if (!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_stop_queue(pnetdev); ++ } ++ ++#ifndef CONFIG_ANDROID ++ //s2. ++ LeaveAllPowerSaveMode(padapter); ++ rtw_disassoc_cmd(padapter, 500, _FALSE); ++ //s2-2. indicate disconnect to os ++ rtw_indicate_disconnect(padapter); ++ //s2-3. ++ rtw_free_assoc_resources(padapter, 1); ++ //s2-4. ++ rtw_free_network_queue(padapter,_TRUE); ++#endif ++ // Close LED ++ rtw_led_control(padapter, LED_CTL_POWER_OFF); ++ } ++ ++#ifdef CONFIG_BR_EXT ++ //if (OPMODE & (WIFI_STATION_STATE | WIFI_ADHOC_STATE)) ++ { ++ //void nat25_db_cleanup(_adapter *priv); ++ nat25_db_cleanup(padapter); ++ } ++#endif // CONFIG_BR_EXT ++ ++#ifdef CONFIG_P2P ++#ifdef CONFIG_IOCTL_CFG80211 ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ { ++ if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled == _TRUE) ++ wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _FALSE; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ rtw_p2p_enable(padapter, P2P_ROLE_DISABLE); ++#endif //CONFIG_P2P ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ rtw_scan_abort(padapter); ++ wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE; ++ padapter->rtw_wdev->iftype = NL80211_IFTYPE_MONITOR; //set this at the end ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - drv_close\n")); ++ DBG_871X("-871x_drv - drv_close, bup=%d\n", padapter->bup); ++ ++ return 0; ++} ++ ++void rtw_ndev_destructor(struct net_device *ndev) ++{ ++ DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if (ndev->ieee80211_ptr) ++ rtw_mfree((u8 *)ndev->ieee80211_ptr, sizeof(struct wireless_dev)); ++#endif ++ free_netdev(ndev); ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_intf.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_intf.c +new file mode 100644 +index 000000000000..15f5d9b9e0bf +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_intf.c +@@ -0,0 +1,1996 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_INTF_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifndef CONFIG_PCI_HCI ++ ++#error "CONFIG_PCI_HCI shall be on!\n" ++ ++#endif ++ ++#include ++#include ++#include ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#ifdef CONFIG_80211N_HT ++extern int rtw_ht_enable; ++extern int rtw_cbw40_enable; ++extern int rtw_ampdu_enable;//for enable tx_ampdu ++#endif ++ ++#ifdef CONFIG_PM ++extern int pm_netdev_open(struct net_device *pnetdev); ++static int rtw_suspend(struct pci_dev *pdev, pm_message_t state); ++static int rtw_resume(struct pci_dev *pdev); ++#endif ++ ++ ++static int rtw_drv_init(struct pci_dev *pdev, const struct pci_device_id *pdid); ++static void rtw_dev_remove(struct pci_dev *pdev); ++ ++static struct specific_device_id specific_device_id_tbl[] = { ++ {.idVendor=0x0b05, .idProduct=0x1791, .flags=SPEC_DEV_ID_DISABLE_HT}, ++ {.idVendor=0x13D3, .idProduct=0x3311, .flags=SPEC_DEV_ID_DISABLE_HT}, ++ {} ++}; ++ ++struct pci_device_id rtw_pci_id_tbl[] = { ++#ifdef CONFIG_RTL8192C ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8191)}, ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8178)}, ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8177)}, ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8176)}, ++#endif ++#ifdef CONFIG_RTL8192D ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8193)}, ++ {PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x002B)}, ++#endif ++ {}, ++}; ++ ++struct pci_drv_priv { ++ struct pci_driver rtw_pci_drv; ++ int drv_registered; ++}; ++ ++ ++static struct pci_drv_priv pci_drvpriv = { ++ .rtw_pci_drv.name = (char*)DRV_NAME, ++ .rtw_pci_drv.probe = rtw_drv_init, ++ .rtw_pci_drv.remove = rtw_dev_remove, ++ .rtw_pci_drv.id_table = rtw_pci_id_tbl, ++#ifdef CONFIG_PM ++ .rtw_pci_drv.suspend = rtw_suspend, ++ .rtw_pci_drv.resume = rtw_resume, ++#else ++ .rtw_pci_drv.suspend = NULL, ++ .rtw_pci_drv.resume = NULL, ++#endif ++}; ++ ++ ++MODULE_DEVICE_TABLE(pci, rtw_pci_id_tbl); ++ ++ ++static u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = { ++ INTEL_VENDOR_ID, ++ ATI_VENDOR_ID, ++ AMD_VENDOR_ID, ++ SIS_VENDOR_ID ++}; ++ ++static u8 rtw_pci_platform_switch_device_pci_aspm(_adapter *padapter, u8 value) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ u8 bresult = _SUCCESS; ++ int error; ++ ++ value |= 0x40; ++ ++ error = pci_write_config_byte(pdvobjpriv->ppcidev, 0x80, value); ++ ++ if(error != 0) ++ { ++ bresult = _FALSE; ++ DBG_871X("rtw_pci_platform_switch_device_pci_aspm error (%d)\n",error); ++ } ++ ++ return bresult; ++} ++ ++// ++// When we set 0x01 to enable clk request. Set 0x0 to disable clk req. ++// ++static u8 rtw_pci_switch_clk_req(_adapter *padapter, u8 value) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ u8 buffer, bresult = _SUCCESS; ++ int error; ++ ++ buffer = value; ++ ++ if(!padapter->hw_init_completed) ++ return bresult; ++ ++ error = pci_write_config_byte(pdvobjpriv->ppcidev, 0x81, value); ++ ++ if(error != 0) ++ { ++ bresult = _FALSE; ++ DBG_871X("rtw_pci_switch_clk_req error (%d)\n",error); ++ } ++ ++ return bresult; ++} ++ ++#if 0 ++//Description: ++//Disable RTL8192SE ASPM & Disable Pci Bridge ASPM ++void rtw_pci_disable_aspm(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ u32 pcicfg_addrport = 0; ++ u8 num4bytes; ++ u8 linkctrl_reg; ++ u16 pcibridge_linkctrlreg, aspmlevel = 0; ++ ++ // When there exists anyone's busnum, devnum, and funcnum that are set to 0xff, ++ // we do not execute any action and return. ++ // if it is not intel bus then don't enable ASPM. ++ if ((pcipriv->busnumber == 0xff ++ && pcipriv->devnumber == 0xff ++ && pcipriv->funcnumber == 0xff) ++ || (pcipriv->pcibridge_busnum == 0xff ++ && pcipriv->pcibridge_devnum == 0xff ++ && pcipriv->pcibridge_funcnum == 0xff)) ++ { ++ DBG_871X("PlatformEnableASPM(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n"); ++ return; ++ } ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) { ++ DBG_871X("%s(): Disable ASPM. Recognize the Bus of PCI(Bridge) as UNKNOWN.\n", __func__); ++ } ++ ++ if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) { ++ RT_CLEAR_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ); ++ rtw_pci_switch_clk_req(padapter, 0x0); ++ } ++ ++ { ++ // Suggested by SD1 for promising device will in L0 state after an I/O. ++ u8 tmp_u1b; ++ ++ pci_read_config_byte(pdvobjpriv->ppcidev, 0x80, &tmp_u1b); ++ } ++ ++ // Retrieve original configuration settings. ++ linkctrl_reg = pcipriv->linkctrl_reg; ++ pcibridge_linkctrlreg = pcipriv->pcibridge_linkctrlreg; ++ ++ // Set corresponding value. ++ aspmlevel |= BIT(0) | BIT(1); ++ linkctrl_reg &= ~aspmlevel; ++ pcibridge_linkctrlreg &= ~(BIT(0) | BIT(1)); ++ ++ rtw_pci_platform_switch_device_pci_aspm(padapter, linkctrl_reg); ++ rtw_udelay_os(50); ++ ++ //When there exists anyone's busnum, devnum, and funcnum that are set to 0xff, ++ // we do not execute any action and return. ++ if ((pcipriv->busnumber == 0xff && ++ pcipriv->devnumber == 0xff && ++ pcipriv->funcnumber == 0xff) || ++ (pcipriv->pcibridge_busnum == 0xff && ++ pcipriv->pcibridge_devnum == 0xff ++ && pcipriv->pcibridge_funcnum == 0xff)) ++ { ++ //Do Nothing!! ++ } ++ else ++ { ++ //4 //Disable Pci Bridge ASPM ++ pcicfg_addrport = (pcipriv->pcibridge_busnum << 16) | ++ (pcipriv->pcibridge_devnum << 11) | ++ (pcipriv->pcibridge_funcnum << 8) | (1 << 31); ++ num4bytes = (pcipriv->pcibridge_pciehdr_offset + 0x10) / 4; ++ ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawWritePortUchar(PCI_CONF_DATA, pcibridge_linkctrlreg); ++ ++ DBG_871X("rtw_pci_disable_aspm():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n", ++ pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum, ++ (pcipriv->pcibridge_pciehdr_offset+0x10), pcibridge_linkctrlreg); ++ ++ rtw_udelay_os(50); ++ } ++} ++ ++//[ASPM] ++//Description: ++// Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for power saving ++// We should follow the sequence to enable RTL8192SE first then enable Pci Bridge ASPM ++// or the system will show bluescreen. ++void rtw_pci_enable_aspm(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ u16 aspmlevel = 0; ++ u32 pcicfg_addrport = 0; ++ u8 num4bytes; ++ u8 u_pcibridge_aspmsetting = 0; ++ u8 u_device_aspmsetting = 0; ++ ++ // When there exists anyone's busnum, devnum, and funcnum that are set to 0xff, ++ // we do not execute any action and return. ++ // if it is not intel bus then don't enable ASPM. ++ ++ if ((pcipriv->busnumber == 0xff ++ && pcipriv->devnumber == 0xff ++ && pcipriv->funcnumber == 0xff) ++ || (pcipriv->pcibridge_busnum == 0xff ++ && pcipriv->pcibridge_devnum == 0xff ++ && pcipriv->pcibridge_funcnum == 0xff)) ++ { ++ DBG_871X("PlatformEnableASPM(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n"); ++ return; ++ } ++ ++ //4 Enable Pci Bridge ASPM ++ pcicfg_addrport = (pcipriv->pcibridge_busnum << 16) ++ | (pcipriv->pcibridge_devnum << 11) ++ | (pcipriv->pcibridge_funcnum << 8) | (1 << 31); ++ num4bytes = (pcipriv->pcibridge_pciehdr_offset + 0x10) / 4; ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ // now grab data port with device|vendor 4 byte dword ++ ++ u_pcibridge_aspmsetting = pcipriv->pcibridge_linkctrlreg | pdvobjpriv->const_hostpci_aspm_setting; ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL || ++ pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_SIS) ++ u_pcibridge_aspmsetting &= ~BIT(0); ++ ++ NdisRawWritePortUchar(PCI_CONF_DATA, u_pcibridge_aspmsetting); ++ ++ DBG_871X("PlatformEnableASPM():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n", ++ pcipriv->pcibridge_busnum, ++ pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum, ++ (pcipriv->pcibridge_pciehdr_offset+0x10), ++ u_pcibridge_aspmsetting); ++ ++ rtw_udelay_os(50); ++ ++ // Get ASPM level (with/without Clock Req) ++ aspmlevel |= pdvobjpriv->const_devicepci_aspm_setting; ++ u_device_aspmsetting = pcipriv->linkctrl_reg; ++ u_device_aspmsetting |= aspmlevel; ++ ++ rtw_pci_platform_switch_device_pci_aspm(padapter, u_device_aspmsetting); //(priv->linkctrl_reg | ASPMLevel)); ++ ++ if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) { ++ rtw_pci_switch_clk_req(padapter, (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0); ++ RT_SET_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ); ++ } ++ ++ rtw_udelay_os(50); ++} ++ ++// ++//Description: ++//To get link control field by searching from PCIe capability lists. ++// ++static u8 ++rtw_get_link_control_field(_adapter *padapter, u8 busnum, u8 devnum, ++ u8 funcnum) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ struct rt_pci_capabilities_header capability_hdr; ++ u8 capability_offset, num4bytes; ++ u32 pcicfg_addrport = 0; ++ u8 linkctrl_reg; ++ u8 status = _FALSE; ++ ++ //If busnum, devnum, funcnum are set to 0xff. ++ if (busnum == 0xff && devnum == 0xff && funcnum == 0xff) { ++ DBG_871X("GetLinkControlField(): Fail to find PCIe Capability\n"); ++ return _FALSE; ++ } ++ ++ pcicfg_addrport = (busnum << 16) | (devnum << 11) | (funcnum << 8) | (1 << 31); ++ ++ //2PCIeCap ++ ++ // The device supports capability lists. Find the capabilities. ++ num4bytes = 0x34 / 4; ++ //get capability_offset ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawReadPortUchar(PCI_CONF_DATA, &capability_offset); ++ ++ // Loop through the capabilities in search of the power management capability. ++ // The list is NULL-terminated, so the last offset will always be zero. ++ ++ while (capability_offset != 0) { ++ // First find the number of 4 Byte. ++ num4bytes = capability_offset / 4; ++ ++ // Read the header of the capability at this offset. If the retrieved capability is not ++ // the power management capability that we are looking for, follow the link to the ++ // next capability and continue looping. ++ ++ //4 get capability_hdr ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawReadPortUshort(PCI_CONF_DATA, (u16 *) & capability_hdr); ++ ++ // Found the PCI express capability ++ if (capability_hdr.capability_id == PCI_CAPABILITY_ID_PCI_EXPRESS) ++ { ++ break; ++ } ++ else ++ { ++ // This is some other capability. Keep looking for the PCI express capability. ++ capability_offset = capability_hdr.next; ++ } ++ } ++ ++ if (capability_hdr.capability_id == PCI_CAPABILITY_ID_PCI_EXPRESS) // ++ { ++ num4bytes = (capability_offset + 0x10) / 4; ++ ++ //4 Read Link Control Register ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawReadPortUchar(PCI_CONF_DATA, &linkctrl_reg); ++ ++ pcipriv->pcibridge_pciehdr_offset = capability_offset; ++ pcipriv->pcibridge_linkctrlreg = linkctrl_reg; ++ ++ status = _TRUE; ++ } ++ else ++ { ++ // We didn't find a PCIe capability. ++ DBG_871X("GetLinkControlField(): Cannot Find PCIe Capability\n"); ++ } ++ ++ return status; ++} ++ ++// ++//Description: ++//To get PCI bus infomation and return busnum, devnum, and funcnum about ++//the bus(bridge) which the device binds. ++// ++static u8 ++rtw_get_pci_bus_info(_adapter *padapter, ++ u16 vendorid, ++ u16 deviceid, ++ u8 irql, u8 basecode, u8 subclass, u8 filed19val, ++ u8 * busnum, u8 * devnum, u8 * funcnum) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pci_dev *pdev = pdvobjpriv->ppcidev; ++ u8 busnum_idx, devicenum_idx, functionnum_idx; ++ u32 pcicfg_addrport = 0; ++ u32 dev_venid = 0, classcode, field19, headertype; ++ u16 venId, devId; ++ u8 basec, subc, irqline; ++ u16 regoffset; ++ u8 b_singlefunc = _FALSE; ++ u8 b_bridgechk = _FALSE; ++ ++ *busnum = 0xFF; ++ *devnum = 0xFF; ++ *funcnum = 0xFF; ++ ++ //DBG_871X("==============>vendorid:%x,deviceid:%x,irql:%x\n", vendorid,deviceid,irql); ++ if ((basecode == PCI_CLASS_BRIDGE_DEV) && ++ (subclass == PCI_SUBCLASS_BR_PCI_TO_PCI) ++ && (filed19val == U1DONTCARE)) ++ b_bridgechk = _TRUE; ++ ++ // perform a complete pci bus scan operation ++ for (busnum_idx = 0; busnum_idx < PCI_MAX_BRIDGE_NUMBER; busnum_idx++) //255 ++ { ++ for (devicenum_idx = 0; devicenum_idx < PCI_MAX_DEVICES; devicenum_idx++) //32 ++ { ++ b_singlefunc = _FALSE; ++ for (functionnum_idx = 0; functionnum_idx < PCI_MAX_FUNCTION; functionnum_idx++) //8 ++ { ++ // ++ // We have to skip redundant Bus scan to prevent unexpected system hang ++ // if single function is present in this device. ++ // 2009.02.26. ++ // ++ if (functionnum_idx == 0) { ++ //4 get header type (DWORD #3) ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (3 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &headertype); ++ headertype = ((headertype >> 16) & 0x0080) >> 7; // address 0x0e[7]. ++ if (headertype == 0) //Single function ++ b_singlefunc = _TRUE; ++ } ++ else ++ {//By pass the following scan process. ++ if (b_singlefunc == _TRUE) ++ break; ++ } ++ ++ // Set access enable control. ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ ++ //4 // Get vendorid/ deviceid ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport); ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawReadPortUlong(PCI_CONF_DATA, &dev_venid); ++ ++ // if data port is full of 1s, no device is present ++ // some broken boards return 0 if a slot is empty: ++ if (dev_venid == 0xFFFFFFFF || dev_venid == 0) ++ continue; //PCI_INVALID_VENDORID ++ ++ // 4 // Get irql ++ regoffset = 0x3C; ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31) | (regoffset & 0xFFFFFFFC); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport); ++ NdisRawReadPortUchar((PCI_CONF_DATA +(regoffset & 0x3)), &irqline); ++ ++ venId = (u16) (dev_venid >> 0) & 0xFFFF; ++ devId = (u16) (dev_venid >> 16) & 0xFFFF; ++ ++ // Check Vendor ID ++ if (!b_bridgechk && (venId != vendorid) && (vendorid != U2DONTCARE)) ++ continue; ++ ++ // Check Device ID ++ if (!b_bridgechk && (devId != deviceid) && (deviceid != U2DONTCARE)) ++ continue; ++ ++ // Check irql ++ if (!b_bridgechk && (irqline != irql) && (irql != U1DONTCARE)) ++ continue; ++ ++ //4 get Class Code ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (2 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &classcode); ++ classcode = classcode >> 8; ++ ++ basec = (u8) (classcode >> 16) & 0xFF; ++ subc = (u8) (classcode >> 8) & 0xFF; ++ if (b_bridgechk && (venId != vendorid) && (basec == basecode) && (subc == subclass)) ++ return _TRUE; ++ ++ // Check Vendor ID ++ if (b_bridgechk && (venId != vendorid) && (vendorid != U2DONTCARE)) ++ continue; ++ ++ // Check Device ID ++ if (b_bridgechk && (devId != deviceid) && (deviceid != U2DONTCARE)) ++ continue; ++ ++ // Check irql ++ if (b_bridgechk && (irqline != irql) && (irql != U1DONTCARE)) ++ continue; ++ ++ //4 get field 0x19 value (DWORD #6) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (6 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &field19); ++ field19 = (field19 >> 8) & 0xFF; ++ ++ //4 Matching Class Code and filed19. ++ if ((basec == basecode) && (subc == subclass) && ((field19 == filed19val) || (filed19val == U1DONTCARE))) { ++ *busnum = busnum_idx; ++ *devnum = devicenum_idx; ++ *funcnum = functionnum_idx; ++ ++ DBG_871X("GetPciBusInfo(): Find Device(%X:%X) bus=%d dev=%d, func=%d\n", ++ vendorid, deviceid, busnum_idx, devicenum_idx, functionnum_idx); ++ return _TRUE; ++ } ++ } ++ } ++ } ++ ++ DBG_871X("GetPciBusInfo(): Cannot Find Device(%X:%X:%X)\n", vendorid, deviceid, dev_venid); ++ ++ return _FALSE; ++} ++ ++static u8 ++rtw_get_pci_brideg_info(_adapter *padapter, ++ u8 basecode, ++ u8 subclass, ++ u8 filed19val, u8 * busnum, u8 * devnum, ++ u8 * funcnum, u16 * vendorid, u16 * deviceid) ++{ ++ u8 busnum_idx, devicenum_idx, functionnum_idx; ++ u32 pcicfg_addrport = 0; ++ u32 dev_venid, classcode, field19, headertype; ++ u16 venId, devId; ++ u8 basec, subc, irqline; ++ u16 regoffset; ++ u8 b_singlefunc = _FALSE; ++ ++ *busnum = 0xFF; ++ *devnum = 0xFF; ++ *funcnum = 0xFF; ++ ++ // perform a complete pci bus scan operation ++ for (busnum_idx = 0; busnum_idx < PCI_MAX_BRIDGE_NUMBER; busnum_idx++) //255 ++ { ++ for (devicenum_idx = 0; devicenum_idx < PCI_MAX_DEVICES; devicenum_idx++) //32 ++ { ++ b_singlefunc = _FALSE; ++ for (functionnum_idx = 0; functionnum_idx < PCI_MAX_FUNCTION; functionnum_idx++) //8 ++ { ++ // ++ // We have to skip redundant Bus scan to prevent unexpected system hang ++ // if single function is present in this device. ++ // 2009.02.26. ++ // ++ if (functionnum_idx == 0) ++ { ++ //4 get header type (DWORD #3) ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ //NdisRawWritePortUlong((ULONG_PTR)PCI_CONF_ADDRESS , pcicfg_addrport + (3 << 2)); ++ //NdisRawReadPortUlong((ULONG_PTR)PCI_CONF_DATA, &headertype); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (3 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &headertype); ++ headertype = ((headertype >> 16) & 0x0080) >> 7; // address 0x0e[7]. ++ if (headertype == 0) //Single function ++ b_singlefunc = _TRUE; ++ } ++ else ++ {//By pass the following scan process. ++ if (b_singlefunc == _TRUE) ++ break; ++ } ++ ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ ++ //4 // Get vendorid/ deviceid ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport); ++ // now grab data port with device|vendor 4 byte dword ++ NdisRawReadPortUlong(PCI_CONF_DATA, &dev_venid); ++ ++ //4 Get irql ++ regoffset = 0x3C; ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31) | (regoffset & 0xFFFFFFFC); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport); ++ NdisRawReadPortUchar((PCI_CONF_DATA + (regoffset & 0x3)), &irqline); ++ ++ venId = (u16) (dev_venid >> 0) & 0xFFFF; ++ devId = (u16) (dev_venid >> 16) & 0xFFFF; ++ ++ //4 get Class Code ++ pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31); ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (2 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &classcode); ++ classcode = classcode >> 8; ++ ++ basec = (u8) (classcode >> 16) & 0xFF; ++ subc = (u8) (classcode >> 8) & 0xFF; ++ ++ //4 get field 0x19 value (DWORD #6) ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (6 << 2)); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &field19); ++ field19 = (field19 >> 8) & 0xFF; ++ ++ //4 Matching Class Code and filed19. ++ if ((basec == basecode) && (subc == subclass) && ((field19 == filed19val) || (filed19val == U1DONTCARE))) { ++ *busnum = busnum_idx; ++ *devnum = devicenum_idx; ++ *funcnum = functionnum_idx; ++ *vendorid = venId; ++ *deviceid = devId; ++ ++ DBG_871X("GetPciBridegInfo : Find Device(%X:%X) bus=%d dev=%d, func=%d\n", ++ venId, devId, busnum_idx, devicenum_idx, functionnum_idx); ++ ++ return _TRUE; ++ } ++ } ++ } ++ } ++ ++ DBG_871X("GetPciBridegInfo(): Cannot Find PciBridge for Device\n"); ++ ++ return _FALSE; ++} // end of GetPciBridegInfo ++ ++// ++//Description: ++//To find specific bridge information. ++// ++static void rtw_find_bridge_info(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ u8 pcibridge_busnum = 0xff; ++ u8 pcibridge_devnum = 0xff; ++ u8 pcibridge_funcnum = 0xff; ++ u16 pcibridge_vendorid = 0xff; ++ u16 pcibridge_deviceid = 0xff; ++ u8 tmp = 0; ++ ++ rtw_get_pci_brideg_info(padapter, ++ PCI_CLASS_BRIDGE_DEV, ++ PCI_SUBCLASS_BR_PCI_TO_PCI, ++ pcipriv->busnumber, ++ &pcibridge_busnum, ++ &pcibridge_devnum, &pcibridge_funcnum, ++ &pcibridge_vendorid, &pcibridge_deviceid); ++ ++ // match the array of vendor id and regonize which chipset is used. ++ pcipriv->pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN; ++ ++ for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) { ++ if (pcibridge_vendorid == pcibridge_vendors[tmp]) { ++ pcipriv->pcibridge_vendor = tmp; ++ DBG_871X("Pci Bridge Vendor is found index: %d\n", tmp); ++ break; ++ } ++ } ++ DBG_871X("Pci Bridge Vendor is %x\n", pcibridge_vendors[tmp]); ++ ++ // Update corresponding PCI bus info. ++ pcipriv->pcibridge_busnum = pcibridge_busnum; ++ pcipriv->pcibridge_devnum = pcibridge_devnum; ++ pcipriv->pcibridge_funcnum = pcibridge_funcnum; ++ pcipriv->pcibridge_vendorid = pcibridge_vendorid; ++ pcipriv->pcibridge_deviceid = pcibridge_deviceid; ++ ++} ++ ++static u8 ++rtw_get_amd_l1_patch(_adapter *padapter, u8 busnum, u8 devnum, ++ u8 funcnum) ++{ ++ u8 status = _FALSE; ++ u8 offset_e0; ++ unsigned offset_e4; ++ u32 pcicfg_addrport = 0; ++ ++ pcicfg_addrport = (busnum << 16) | (devnum << 11) | (funcnum << 8) | (1 << 31); ++ ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE0); ++ NdisRawWritePortUchar(PCI_CONF_DATA, 0xA0); ++ ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE0); ++ NdisRawReadPortUchar(PCI_CONF_DATA, &offset_e0); ++ ++ if (offset_e0 == 0xA0) ++ { ++ NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE4); ++ NdisRawReadPortUlong(PCI_CONF_DATA, &offset_e4); ++ //DbgPrint("Offset E4 %x\n", offset_e4); ++ if (offset_e4 & BIT(23)) ++ status = _TRUE; ++ } ++ ++ return status; ++} ++#else ++/*Disable RTL8192SE ASPM & Disable Pci Bridge ASPM*/ ++void rtw_pci_disable_aspm(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct pci_dev *pdev = pdvobjpriv->ppcidev; ++ struct pci_dev *bridge_pdev = pdev->bus->self; ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ u8 linkctrl_reg; ++ u16 pcibridge_linkctrlreg; ++ u16 aspmlevel = 0; ++ ++ // We do not diable/enable ASPM by driver, in the future, the BIOS will enable host and NIC ASPM. ++ // Advertised by SD1 victorh. Added by tynli. 2009.11.23. ++ if(pdvobjpriv->const_pci_aspm == 0) ++ return; ++ ++ if(!padapter->hw_init_completed) ++ return; ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) { ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("%s(): PCI(Bridge) UNKNOWN.\n", __FUNCTION__)); ++ return; ++ } ++ ++ linkctrl_reg = pcipriv->linkctrl_reg; ++ pcibridge_linkctrlreg = pcipriv->pcibridge_linkctrlreg; ++ ++ // Set corresponding value. ++ aspmlevel |= BIT(0) | BIT(1); ++ linkctrl_reg &=~aspmlevel; ++ pcibridge_linkctrlreg &=~aspmlevel; ++ ++ if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) { ++ RT_CLEAR_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ); ++ rtw_pci_switch_clk_req(padapter, 0x0); ++ } ++ ++ { ++ /*for promising device will in L0 state after an I/O.*/ ++ u8 tmp_u1b; ++ pci_read_config_byte(pdev, 0x80, &tmp_u1b); ++ } ++ ++ rtw_pci_platform_switch_device_pci_aspm(padapter, linkctrl_reg); ++ rtw_udelay_os(50); ++ ++ //When there exists anyone's BusNum, DevNum, and FuncNum that are set to 0xff, ++ // we do not execute any action and return. Added by tynli. ++ if( (pcipriv->busnumber == 0xff && pcipriv->devnumber == 0xff && pcipriv->funcnumber == 0xff) || ++ (pcipriv->pcibridge_busnum == 0xff && pcipriv->pcibridge_devnum == 0xff && pcipriv->pcibridge_funcnum == 0xff) ) ++ { ++ // Do Nothing!! ++ } ++ else ++ { ++ /*Disable Pci Bridge ASPM*/ ++ //NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2)); ++ //NdisRawWritePortUchar(PCI_CONF_DATA, pcibridge_linkctrlreg); ++ pci_write_config_byte(bridge_pdev, pcipriv->pcibridge_pciehdr_offset + 0x10, pcibridge_linkctrlreg); ++ ++ DBG_871X("rtw_pci_disable_aspm():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n", ++ pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum, ++ (pcipriv->pcibridge_pciehdr_offset+0x10), pcibridge_linkctrlreg); ++ ++ rtw_udelay_os(50); ++ } ++ ++} ++ ++/*Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for ++power saving We should follow the sequence to enable ++RTL8192SE first then enable Pci Bridge ASPM ++or the system will show bluescreen.*/ ++void rtw_pci_enable_aspm(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct pci_dev *pdev = pdvobjpriv->ppcidev; ++ struct pci_dev *bridge_pdev = pdev->bus->self; ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ u16 aspmlevel = 0; ++ u8 u_pcibridge_aspmsetting = 0; ++ u8 u_device_aspmsetting = 0; ++ u32 u_device_aspmsupportsetting = 0; ++ ++ // We do not diable/enable ASPM by driver, in the future, the BIOS will enable host and NIC ASPM. ++ // Advertised by SD1 victorh. Added by tynli. 2009.11.23. ++ if(pdvobjpriv->const_pci_aspm == 0) ++ return; ++ ++ //When there exists anyone's BusNum, DevNum, and FuncNum that are set to 0xff, ++ // we do not execute any action and return. Added by tynli. ++ if( (pcipriv->busnumber == 0xff && pcipriv->devnumber == 0xff && pcipriv->funcnumber == 0xff) || ++ (pcipriv->pcibridge_busnum == 0xff && pcipriv->pcibridge_devnum == 0xff && pcipriv->pcibridge_funcnum == 0xff) ) ++ { ++ DBG_871X("rtw_pci_enable_aspm(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n"); ++ return; ++ } ++ ++//Get Bridge ASPM Support ++//not to enable bridge aspm if bridge does not support ++//Added by sherry 20100803 ++ if (IS_HARDWARE_TYPE_8192DE(padapter)) ++ { ++ //PciCfgAddrPort = (pcipriv->pcibridge_busnum << 16)|(pcipriv->pcibridge_devnum<< 11)|(pcipriv->pcibridge_funcnum << 8)|(1 << 31); ++ //Num4Bytes = (pcipriv->pcibridge_pciehdr_offset+0x0C)/4; ++ //NdisRawWritePortUlong((ULONG_PTR)PCI_CONF_ADDRESS , PciCfgAddrPort+(Num4Bytes << 2)); ++ //NdisRawReadPortUlong((ULONG_PTR)PCI_CONF_DATA,&uDeviceASPMSupportSetting); ++ pci_read_config_dword(bridge_pdev, (pcipriv->pcibridge_pciehdr_offset+0x0C), &u_device_aspmsupportsetting); ++ DBG_871X("rtw_pci_enable_aspm(): Bridge ASPM support %x \n",u_device_aspmsupportsetting); ++ if(((u_device_aspmsupportsetting & BIT(11)) != BIT(11)) || ((u_device_aspmsupportsetting & BIT(10)) != BIT(10))) ++ { ++ if(pdvobjpriv->const_devicepci_aspm_setting == 3) ++ { ++ DBG_871X("rtw_pci_enable_aspm(): Bridge not support L0S or L1\n"); ++ return; ++ } ++ else if(pdvobjpriv->const_devicepci_aspm_setting == 2) ++ { ++ if((u_device_aspmsupportsetting & BIT(11)) != BIT(11)) ++ { ++ DBG_871X("rtw_pci_enable_aspm(): Bridge not support L1 \n"); ++ return; ++ } ++ } ++ else if(pdvobjpriv->const_devicepci_aspm_setting == 1) ++ { ++ if((u_device_aspmsupportsetting & BIT(10)) != BIT(10)) ++ { ++ DBG_871X("rtw_pci_enable_aspm(): Bridge not support L0s \n"); ++ return; ++ } ++ ++ } ++ } ++ else ++ { ++ DBG_871X("rtw_pci_enable_aspm(): Bridge support L0s and L1 \n"); ++ } ++ } ++ ++ ++ /*Enable Pci Bridge ASPM*/ ++ //PciCfgAddrPort = (pcipriv->pcibridge_busnum << 16)|(pcipriv->pcibridge_devnum<< 11) |(pcipriv->pcibridge_funcnum << 8)|(1 << 31); ++ //Num4Bytes = (pcipriv->pcibridge_pciehdr_offset+0x10)/4; ++ // set up address port at 0xCF8 offset field= 0 (dev|vend) ++ //NdisRawWritePortUlong(PCI_CONF_ADDRESS, PciCfgAddrPort + (Num4Bytes << 2)); ++ // now grab data port with device|vendor 4 byte dword ++ ++ u_pcibridge_aspmsetting = pcipriv->pcibridge_linkctrlreg; ++ u_pcibridge_aspmsetting |= pdvobjpriv->const_hostpci_aspm_setting; ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL || ++ pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_SIS ) ++ u_pcibridge_aspmsetting &= ~BIT(0); // for intel host 42 device 43 ++ ++ //NdisRawWritePortUchar(PCI_CONF_DATA, u_pcibridge_aspmsetting); ++ pci_write_config_byte(bridge_pdev, (pcipriv->pcibridge_pciehdr_offset+0x10), u_pcibridge_aspmsetting); ++ ++ DBG_871X("PlatformEnableASPM():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n", ++ pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum, pcipriv->pcibridge_funcnum, ++ (pcipriv->pcibridge_pciehdr_offset+0x10), ++ u_pcibridge_aspmsetting); ++ ++ rtw_udelay_os(50); ++ ++ /*Get ASPM level (with/without Clock Req)*/ ++ aspmlevel |= pdvobjpriv->const_devicepci_aspm_setting; ++ u_device_aspmsetting = pcipriv->linkctrl_reg; ++ u_device_aspmsetting |= aspmlevel; // device 43 ++ ++ rtw_pci_platform_switch_device_pci_aspm(padapter, u_device_aspmsetting); ++ ++ if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) { ++ rtw_pci_switch_clk_req(padapter, (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0); ++ RT_SET_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ); ++ } ++ ++ rtw_udelay_os(50); ++} ++ ++static u8 rtw_pci_get_amd_l1_patch(struct dvobj_priv *dvobj) ++{ ++ struct pci_dev *pdev = dvobj->ppcidev; ++ struct pci_dev *bridge_pdev = pdev->bus->self; ++ u8 status = _FALSE; ++ u8 offset_e0; ++ u32 offset_e4; ++ ++ //NdisRawWritePortUlong(PCI_CONF_ADDRESS,pcicfg_addrport + 0xE0); ++ //NdisRawWritePortUchar(PCI_CONF_DATA, 0xA0); ++ pci_write_config_byte(bridge_pdev, 0xE0, 0xA0); ++ ++ //NdisRawWritePortUlong(PCI_CONF_ADDRESS,pcicfg_addrport + 0xE0); ++ //NdisRawReadPortUchar(PCI_CONF_DATA, &offset_e0); ++ pci_read_config_byte(bridge_pdev, 0xE0, &offset_e0); ++ ++ if (offset_e0 == 0xA0) { ++ //NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE4); ++ //NdisRawReadPortUlong(PCI_CONF_DATA, &offset_e4); ++ pci_read_config_dword(bridge_pdev, 0xE4, &offset_e4); ++ if (offset_e4 & BIT(23)) ++ status = _TRUE; ++ } ++ ++ return status; ++} ++ ++static void rtw_pci_get_linkcontrol_field(struct dvobj_priv *dvobj) ++{ ++ struct pci_priv *pcipriv = &(dvobj->pcipriv); ++ struct pci_dev *pdev = dvobj->ppcidev; ++ struct pci_dev *bridge_pdev = pdev->bus->self; ++ u8 capabilityoffset = pcipriv->pcibridge_pciehdr_offset; ++ u8 linkctrl_reg; ++ ++ /*Read Link Control Register*/ ++ pci_read_config_byte(bridge_pdev, capabilityoffset + PCI_EXP_LNKCTL, &linkctrl_reg); ++ ++ pcipriv->pcibridge_linkctrlreg = linkctrl_reg; ++} ++#endif ++ ++static void rtw_pci_parse_configuration(struct dvobj_priv *dvobj) ++{ ++ struct pci_dev *pdev = dvobj->ppcidev; ++ struct pci_priv *pcipriv = &(dvobj->pcipriv); ++ u8 tmp; ++ int pos; ++ u8 linkctrl_reg; ++ ++ //Link Control Register ++ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); ++ pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &linkctrl_reg); ++ pcipriv->linkctrl_reg = linkctrl_reg; ++ ++ //DBG_871X("Link Control Register = %x\n", pcipriv->linkctrl_reg); ++ ++ pci_read_config_byte(pdev, 0x98, &tmp); ++ tmp |= BIT(4); ++ pci_write_config_byte(pdev, 0x98, tmp); ++ ++ //tmp = 0x17; ++ //pci_write_config_byte(pdev, 0x70f, tmp); ++} ++ ++// ++// Update PCI dependent default settings. ++// ++static void rtw_pci_update_default_setting(_adapter *padapter) ++{ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct pci_priv *pcipriv = &(pdvobjpriv->pcipriv); ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++ //reset pPSC->reg_rfps_level & priv->b_support_aspm ++ pwrpriv->reg_rfps_level = 0; ++ pwrpriv->b_support_aspm = 0; ++ ++ // Dynamic Mechanism, ++ //rtw_hal_set_def_var(pAdapter, HAL_DEF_INIT_GAIN, &(pDevice->InitGainState)); ++ ++ // Update PCI ASPM setting ++ pwrpriv->const_amdpci_aspm = pdvobjpriv->const_amdpci_aspm; ++ switch (pdvobjpriv->const_pci_aspm) { ++ case 0: // No ASPM ++ break; ++ ++ case 1: // ASPM dynamically enabled/disable. ++ pwrpriv->reg_rfps_level |= RT_RF_LPS_LEVEL_ASPM; ++ break; ++ ++ case 2: // ASPM with Clock Req dynamically enabled/disable. ++ pwrpriv->reg_rfps_level |= (RT_RF_LPS_LEVEL_ASPM | RT_RF_OFF_LEVL_CLK_REQ); ++ break; ++ ++ case 3: // Always enable ASPM and Clock Req from initialization to halt. ++ pwrpriv->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM); ++ pwrpriv->reg_rfps_level |= (RT_RF_PS_LEVEL_ALWAYS_ASPM | RT_RF_OFF_LEVL_CLK_REQ); ++ break; ++ ++ case 4: // Always enable ASPM without Clock Req from initialization to halt. ++ pwrpriv->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM | RT_RF_OFF_LEVL_CLK_REQ); ++ pwrpriv->reg_rfps_level |= RT_RF_PS_LEVEL_ALWAYS_ASPM; ++ break; ++ } ++ ++ pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC; ++ ++ // Update Radio OFF setting ++ switch (pdvobjpriv->const_hwsw_rfoff_d3) { ++ case 1: ++ if (pwrpriv->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM) ++ pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM; ++ break; ++ ++ case 2: ++ if (pwrpriv->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM) ++ pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM; ++ pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC; ++ break; ++ ++ case 3: ++ pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_PCI_D3; ++ break; ++ } ++ ++ // Update Rx 2R setting ++ //pPSC->reg_rfps_level |= ((pDevice->RegLPS2RDisable) ? RT_RF_LPS_DISALBE_2R : 0); ++ ++ // ++ // Set HW definition to determine if it supports ASPM. ++ // ++ switch (pdvobjpriv->const_support_pciaspm) { ++ case 0: // Not support ASPM. ++ { ++ u8 b_support_aspm = _FALSE; ++ pwrpriv->b_support_aspm = b_support_aspm; ++ } ++ break; ++ ++ case 1: // Support ASPM. ++ { ++ u8 b_support_aspm = _TRUE; ++ u8 b_support_backdoor = _TRUE; ++ ++ pwrpriv->b_support_aspm = b_support_aspm; ++ ++ /*if(pAdapter->MgntInfo.CustomerID == RT_CID_TOSHIBA && ++ pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD && ++ !pcipriv->amd_l1_patch) ++ b_support_backdoor = _FALSE;*/ ++ ++ pwrpriv->b_support_backdoor = b_support_backdoor; ++ } ++ break; ++ ++ case 2: // Set by Chipset. ++ // ASPM value set by chipset. ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL) { ++ u8 b_support_aspm = _TRUE; ++ pwrpriv->b_support_aspm = b_support_aspm; ++ } ++ break; ++ ++ default: ++ // Do nothing. Set when finding the chipset. ++ break; ++ } ++} ++ ++static void rtw_pci_initialize_adapter_common(_adapter *padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ ++ rtw_pci_update_default_setting(padapter); ++ ++ if (pwrpriv->reg_rfps_level & RT_RF_PS_LEVEL_ALWAYS_ASPM) { ++ // Always enable ASPM & Clock Req. ++ rtw_pci_enable_aspm(padapter); ++ RT_SET_PS_LEVEL(pwrpriv, RT_RF_PS_LEVEL_ALWAYS_ASPM); ++ } ++ ++} ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) || (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) ++#define rtw_pci_interrupt(x,y,z) rtw_pci_interrupt(x,y) ++#endif ++ ++static irqreturn_t rtw_pci_interrupt(int irq, void *priv, struct pt_regs *regs) ++{ ++ struct dvobj_priv *dvobj = (struct dvobj_priv *)priv; ++ _adapter *adapter = dvobj->if1; ++ ++ if (dvobj->irq_enabled == 0) { ++ return IRQ_HANDLED; ++ } ++ ++ if(rtw_hal_interrupt_handler(adapter) == _FAIL) ++ return IRQ_HANDLED; ++ //return IRQ_NONE; ++ ++ return IRQ_HANDLED; ++} ++ ++#ifdef RTK_DMP_PLATFORM ++#define pci_iounmap(x,y) iounmap(y) ++#endif ++ ++int pci_alloc_irq(struct dvobj_priv *dvobj) ++{ ++ int err; ++ struct pci_dev *pdev = dvobj->ppcidev; ++ ++#if defined(IRQF_SHARED) ++ err = request_irq(pdev->irq, &rtw_pci_interrupt, IRQF_SHARED, DRV_NAME, dvobj); ++#else ++ err = request_irq(pdev->irq, &rtw_pci_interrupt, SA_SHIRQ, DRV_NAME, dvobj); ++#endif ++ if (err) { ++ DBG_871X("Error allocating IRQ %d",pdev->irq); ++ } else { ++ dvobj->irq_alloc = 1; ++ DBG_871X("Request_irq OK, IRQ %d\n",pdev->irq); ++ } ++ ++ return err?_FAIL:_SUCCESS; ++} ++ ++static struct dvobj_priv *pci_dvobj_init(struct pci_dev *pdev) ++{ ++ int err; ++ u32 status = _FAIL; ++ struct dvobj_priv *dvobj = NULL; ++ struct pci_priv *pcipriv = NULL; ++ struct pci_dev *bridge_pdev = pdev->bus->self; ++ unsigned long pmem_start, pmem_len, pmem_flags; ++ u8 tmp; ++ ++_func_enter_; ++ ++ if ((dvobj = devobj_init()) == NULL) { ++ goto exit; ++ } ++ dvobj->ppcidev = pdev; ++ pcipriv = &(dvobj->pcipriv); ++ pci_set_drvdata(pdev, dvobj); ++ ++ if ( (err = pci_enable_device(pdev)) != 0) { ++ DBG_871X(KERN_ERR "%s : Cannot enable new PCI device\n", pci_name(pdev)); ++ goto free_dvobj; ++ } ++ ++#ifdef CONFIG_64BIT_DMA ++ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { ++ DBG_871X("RTL819xCE: Using 64bit DMA\n"); ++ if ((err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) != 0) { ++ DBG_871X(KERN_ERR "Unable to obtain 64bit DMA for consistent allocations\n"); ++ goto disable_picdev; ++ } ++ dvobj->bdma64 = _TRUE; ++ } else ++#endif ++ { ++ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { ++ if ((err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) { ++ DBG_871X(KERN_ERR "Unable to obtain 32bit DMA for consistent allocations\n"); ++ goto disable_picdev; ++ } ++ } ++ } ++ ++ pci_set_master(pdev); ++ ++ if ((err = pci_request_regions(pdev, DRV_NAME)) != 0) { ++ DBG_871X(KERN_ERR "Can't obtain PCI resources\n"); ++ goto disable_picdev; ++ } ++ //MEM map ++ pmem_start = pci_resource_start(pdev, 2); ++ pmem_len = pci_resource_len(pdev, 2); ++ pmem_flags = pci_resource_flags(pdev, 2); ++ ++#ifdef RTK_DMP_PLATFORM ++ dvobj->pci_mem_start = (unsigned long)ioremap_nocache(pmem_start, pmem_len); ++#else ++ dvobj->pci_mem_start = (unsigned long)pci_iomap(pdev, 2, pmem_len); /* shared mem start */ ++#endif ++ if (dvobj->pci_mem_start == 0) { ++ DBG_871X(KERN_ERR "Can't map PCI mem\n"); ++ goto release_regions; ++ } ++ ++ DBG_871X("Memory mapped space start: 0x%08lx len:%08lx flags:%08lx, after map:0x%08lx\n", ++ pmem_start, pmem_len, pmem_flags, dvobj->pci_mem_start); ++ ++ // Disable Clk Request */ ++ pci_write_config_byte(pdev, 0x81, 0); ++ // leave D3 mode */ ++ pci_write_config_byte(pdev, 0x44, 0); ++ pci_write_config_byte(pdev, 0x04, 0x06); ++ pci_write_config_byte(pdev, 0x04, 0x07); ++ ++ ++#if 1 ++ /*find bus info*/ ++ pcipriv->busnumber = pdev->bus->number; ++ pcipriv->devnumber = PCI_SLOT(pdev->devfn); ++ pcipriv->funcnumber = PCI_FUNC(pdev->devfn); ++ ++ /*find bridge info*/ ++ pcipriv->pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN; ++ if(bridge_pdev){ ++ pcipriv->pcibridge_vendorid = bridge_pdev->vendor; ++ for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) { ++ if (bridge_pdev->vendor == pcibridge_vendors[tmp]) { ++ pcipriv->pcibridge_vendor = tmp; ++ DBG_871X("Pci Bridge Vendor is found index: %d, %x\n", tmp, pcibridge_vendors[tmp]); ++ break; ++ } ++ } ++ } ++ ++ //if (pcipriv->pcibridge_vendor != PCI_BRIDGE_VENDOR_UNKNOWN) { ++ if(bridge_pdev){ ++ pcipriv->pcibridge_busnum = bridge_pdev->bus->number; ++ pcipriv->pcibridge_devnum = PCI_SLOT(bridge_pdev->devfn); ++ pcipriv->pcibridge_funcnum = PCI_FUNC(bridge_pdev->devfn); ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)) ++ pcipriv->pcibridge_pciehdr_offset = pci_find_capability(bridge_pdev, PCI_CAP_ID_EXP); ++#else ++ pcipriv->pcibridge_pciehdr_offset = bridge_pdev->pcie_cap; ++#endif ++ ++ rtw_pci_get_linkcontrol_field(dvobj); ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD) { ++ pcipriv->amd_l1_patch = rtw_pci_get_amd_l1_patch(dvobj); ++ } ++ } ++#else ++ // ++ // Find bridge related info. ++ // ++ rtw_get_pci_bus_info(padapter, ++ pdev->vendor, ++ pdev->device, ++ (u8) pdvobjpriv->irqline, ++ 0x02, 0x80, U1DONTCARE, ++ &pcipriv->busnumber, ++ &pcipriv->devnumber, ++ &pcipriv->funcnumber); ++ ++ rtw_find_bridge_info(padapter); ++ ++ if (pcipriv->pcibridge_vendor != PCI_BRIDGE_VENDOR_UNKNOWN) { ++ rtw_get_link_control_field(padapter, ++ pcipriv->pcibridge_busnum, ++ pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum); ++ ++ if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD) { ++ pcipriv->amd_l1_patch = ++ rtw_get_amd_l1_patch(padapter, ++ pcipriv->pcibridge_busnum, ++ pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum); ++ } ++ } ++#endif ++ ++ // ++ // Allow the hardware to look at PCI config information. ++ // ++ rtw_pci_parse_configuration(dvobj); ++ ++ DBG_871X("pcidev busnumber:devnumber:funcnumber:" ++ "vendor:link_ctl %d:%d:%d:%x:%x\n", ++ pcipriv->busnumber, ++ pcipriv->devnumber, ++ pcipriv->funcnumber, ++ pdev->vendor, ++ pcipriv->linkctrl_reg); ++ ++ DBG_871X("pci_bridge busnumber:devnumber:funcnumber:vendor:" ++ "pcie_cap:link_ctl_reg: %d:%d:%d:%x:%x:%x:%x\n", ++ pcipriv->pcibridge_busnum, ++ pcipriv->pcibridge_devnum, ++ pcipriv->pcibridge_funcnum, ++ pcibridge_vendors[pcipriv->pcibridge_vendor], ++ pcipriv->pcibridge_pciehdr_offset, ++ pcipriv->pcibridge_linkctrlreg, ++ pcipriv->amd_l1_patch); ++ ++ status = _SUCCESS; ++ ++iounmap: ++ if (status != _SUCCESS && dvobj->pci_mem_start != 0) { ++ pci_iounmap(pdev, (void *)dvobj->pci_mem_start); ++ dvobj->pci_mem_start = 0; ++ } ++release_regions: ++ if (status != _SUCCESS) ++ pci_release_regions(pdev); ++disable_picdev: ++ if (status != _SUCCESS) ++ pci_disable_device(pdev); ++free_dvobj: ++ if (status != _SUCCESS && dvobj) { ++ pci_set_drvdata(pdev, NULL); ++ devobj_deinit(dvobj); ++ dvobj = NULL; ++ } ++exit: ++_func_exit_; ++ return dvobj; ++} ++ ++static void pci_dvobj_deinit(struct pci_dev *pdev) ++{ ++ struct dvobj_priv *dvobj = pci_get_drvdata(pdev); ++_func_enter_; ++ ++ pci_set_drvdata(pdev, NULL); ++ if (dvobj) { ++ if (dvobj->irq_alloc) { ++ free_irq(pdev->irq, dvobj); ++ dvobj->irq_alloc = 0; ++ } ++ ++ if (dvobj->pci_mem_start != 0) { ++ pci_iounmap(pdev, (void *)dvobj->pci_mem_start); ++ dvobj->pci_mem_start = 0; ++ } ++ ++ devobj_deinit(dvobj); ++ } ++ ++ pci_release_regions(pdev); ++ pci_disable_device(pdev); ++ ++_func_exit_; ++} ++ ++static void decide_chip_type_by_pci_device_id(_adapter *padapter, struct pci_dev *pdev) ++{ ++ u16 venderid, deviceid, irqline; ++ u8 revisionid; ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ ++ ++ venderid = pdev->vendor; ++ deviceid = pdev->device; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) ++ pci_read_config_byte(pdev, PCI_REVISION_ID, &revisionid); // PCI_REVISION_ID 0x08 ++#else ++ revisionid = pdev->revision; ++#endif ++ pci_read_config_word(pdev, PCI_INTERRUPT_LINE, &irqline); // PCI_INTERRUPT_LINE 0x3c ++ pdvobjpriv->irqline = irqline; ++ ++ ++ // ++ // Decide hardware type here. ++ // ++ if( deviceid == HAL_HW_PCI_8185_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8188_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8198_DEVICE_ID) ++ { ++ DBG_871X("Adapter (8185/8185B) is found- VendorID/DeviceID=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType=HARDWARE_TYPE_RTL8185; ++ } ++ else if (deviceid == HAL_HW_PCI_8190_DEVICE_ID || ++ deviceid == HAL_HW_PCI_0045_DEVICE_ID || ++ deviceid == HAL_HW_PCI_0046_DEVICE_ID || ++ deviceid == HAL_HW_PCI_DLINK_DEVICE_ID) ++ { ++ DBG_871X("Adapter(8190 PCI) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType = HARDWARE_TYPE_RTL8190P; ++ } ++ else if (deviceid == HAL_HW_PCI_8192_DEVICE_ID || ++ deviceid == HAL_HW_PCI_0044_DEVICE_ID || ++ deviceid == HAL_HW_PCI_0047_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8192SE_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8174_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8173_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8172_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8171_DEVICE_ID) ++ { ++ // 8192e and and 8192se may have the same device ID 8192. However, their Revision ++ // ID is different ++ // Added for 92DE. We deferentiate it from SVID,SDID. ++ if( pdev->subsystem_vendor == 0x10EC && pdev->subsystem_device == 0xE020){ ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192DE; ++ DBG_871X("Adapter(8192DE) is found - VendorID/DeviceID/RID=%X/%X/%X\n", venderid, deviceid, revisionid); ++ }else{ ++ switch (revisionid) { ++ case HAL_HW_PCI_REVISION_ID_8192PCIE: ++ DBG_871X("Adapter(8192 PCI-E) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192E; ++ break; ++ case HAL_HW_PCI_REVISION_ID_8192SE: ++ DBG_871X("Adapter(8192SE) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192SE; ++ break; ++ default: ++ DBG_871X("Err: Unknown device - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192SE; ++ break; ++ } ++ } ++ } ++ else if(deviceid==HAL_HW_PCI_8723E_DEVICE_ID ) ++ {//RTL8723E may have the same device ID with RTL8192CET ++ padapter->HardwareType = HARDWARE_TYPE_RTL8723AE; ++ DBG_871X("Adapter(8723 PCI-E) is found - VendorID/DeviceID=%x/%x\n", venderid, deviceid); ++ } ++ else if (deviceid == HAL_HW_PCI_8192CET_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8192CE_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8191CE_DEVICE_ID || ++ deviceid == HAL_HW_PCI_8188CE_DEVICE_ID) ++ { ++ DBG_871X("Adapter(8192C PCI-E) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192CE; ++ } ++ else if (deviceid == HAL_HW_PCI_8192DE_DEVICE_ID || ++ deviceid == HAL_HW_PCI_002B_DEVICE_ID ){ ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192DE; ++ DBG_871X("Adapter(8192DE) is found - VendorID/DeviceID/RID=%X/%X/%X\n", venderid, deviceid, revisionid); ++ } ++ else ++ { ++ DBG_871X("Err: Unknown device - vendorid/deviceid=%x/%x\n", venderid, deviceid); ++ //padapter->HardwareType = HAL_DEFAULT_HARDWARE_TYPE; ++ } ++ ++ ++ padapter->chip_type = NULL_CHIP_TYPE; ++ ++ //TODO: ++#ifdef CONFIG_RTL8192C ++ padapter->chip_type = RTL8188C_8192C; ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192CE; ++#endif ++#ifdef CONFIG_RTL8192D ++ pdvobjpriv->InterfaceNumber = revisionid; ++ ++ padapter->chip_type = RTL8192D; ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192DE; ++#endif ++ ++} ++ ++static void pci_intf_start(_adapter *padapter) ++{ ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+pci_intf_start\n")); ++ DBG_871X("+pci_intf_start\n"); ++ ++#ifdef CONFIG_PCILED_BLINK ++ rtw_led_control(padapter, LED_CTL_NO_LINK); ++#endif ++ //Enable hw interrupt ++ rtw_hal_enable_interrupt(padapter); ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-pci_intf_start\n")); ++ DBG_871X("-pci_intf_start\n"); ++} ++ ++static void pci_intf_stop(_adapter *padapter) ++{ ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+pci_intf_stop\n")); ++ ++ //Disable hw interrupt ++ if(padapter->bSurpriseRemoved == _FALSE) ++ { ++ //device still exists, so driver can do i/o operation ++ rtw_hal_disable_interrupt(padapter); ++ tasklet_disable(&(padapter->recvpriv.recv_tasklet)); ++ tasklet_disable(&(padapter->recvpriv.irq_prepare_beacon_tasklet)); ++ tasklet_disable(&(padapter->xmitpriv.xmit_tasklet)); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ /* This function only be called at driver removing. disable buddy_adapter too ++ don't disable interrupt of buddy_adapter because it is same as primary. ++ */ ++ if (padapter->pbuddy_adapter){ ++ tasklet_disable(&(padapter->pbuddy_adapter->recvpriv.recv_tasklet)); ++ tasklet_disable(&(padapter->pbuddy_adapter->recvpriv.irq_prepare_beacon_tasklet)); ++ tasklet_disable(&(padapter->pbuddy_adapter->xmitpriv.xmit_tasklet)); ++ } ++#endif ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("pci_intf_stop: SurpriseRemoved==_FALSE\n")); ++ } ++ else ++ { ++ // Clear irq_enabled to prevent handle interrupt function. ++ adapter_to_dvobj(padapter)->irq_enabled = 0; ++ } ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-pci_intf_stop\n")); ++ ++} ++ ++ ++static void rtw_dev_unload(_adapter *padapter) ++{ ++ struct net_device *pnetdev= (struct net_device*)padapter->pnetdev; ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_dev_unload\n")); ++ ++ if(padapter->bup == _TRUE) ++ { ++ DBG_871X("+rtw_dev_unload\n"); ++ ++ padapter->bDriverStopped = _TRUE; ++ #ifdef CONFIG_XMIT_ACK ++ if (padapter->xmitpriv.ack_tx) ++ rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP); ++ #endif ++ ++ //s3. ++ if(padapter->intf_stop) ++ { ++ padapter->intf_stop(padapter); ++ } ++ ++ //s4. ++ rtw_stop_drv_threads(padapter); ++ ++ ++ //s5. ++ if(padapter->bSurpriseRemoved == _FALSE) ++ { ++ DBG_871X("r871x_dev_unload()->rtl871x_hal_deinit()\n"); ++ rtw_hal_deinit(padapter); ++ ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ ++ padapter->bup = _FALSE; ++ ++ } ++ else ++ { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("r871x_dev_unload():padapter->bup == _FALSE\n" )); ++ } ++ ++ DBG_871X("-rtw_dev_unload\n"); ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-rtw_dev_unload\n")); ++ ++} ++ ++static void disable_ht_for_spec_devid(const struct pci_device_id *pdid) ++{ ++#ifdef CONFIG_80211N_HT ++ u16 vid, pid; ++ u32 flags; ++ int i; ++ int num = sizeof(specific_device_id_tbl)/sizeof(struct specific_device_id); ++ ++ for(i=0; ivendor==vid) && (pdid->device==pid) && (flags&SPEC_DEV_ID_DISABLE_HT)) ++ { ++ rtw_ht_enable = 0; ++ rtw_cbw40_enable = 0; ++ rtw_ampdu_enable = 0; ++ } ++ ++ } ++#endif ++} ++ ++#ifdef CONFIG_PM ++static int rtw_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ _func_enter_; ++ ++ ++ _func_exit_; ++ return 0; ++} ++ ++static int rtw_resume(struct pci_dev *pdev) ++{ ++ _func_enter_; ++ ++ ++ _func_exit_; ++ ++ return 0; ++} ++#endif ++ ++_adapter *rtw_pci_if1_init(struct dvobj_priv * dvobj, struct pci_dev *pdev, ++ const struct pci_device_id *pdid) ++{ ++ _adapter *padapter = NULL; ++ struct net_device *pnetdev = NULL; ++ int status = _FAIL; ++ ++ if ((padapter = (_adapter *)rtw_zvmalloc(sizeof(*padapter))) == NULL) { ++ goto exit; ++ } ++ padapter->dvobj = dvobj; ++ dvobj->if1 = padapter; ++ ++ padapter->bDriverStopped=_TRUE; ++ ++ dvobj->padapters[dvobj->iface_nums++] = padapter; ++ padapter->iface_id = IFACE_ID0; ++ ++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT) ++ //set adapter_type/iface type for primary padapter ++ padapter->isprimary = _TRUE; ++ padapter->adapter_type = PRIMARY_ADAPTER; ++ #ifndef CONFIG_HWPORT_SWAP ++ padapter->iface_type = IFACE_PORT0; ++ #else ++ padapter->iface_type = IFACE_PORT1; ++ #endif ++#endif ++ ++ //step 1-1., decide the chip_type via vid/pid ++ padapter->interface_type = RTW_PCIE; ++ decide_chip_type_by_pci_device_id(padapter, pdev); ++ ++ if((pnetdev = rtw_init_netdev(padapter)) == NULL) { ++ goto free_adapter; ++ } ++ if (dvobj->bdma64) ++ pnetdev->features |= NETIF_F_HIGHDMA; ++ pnetdev->irq = pdev->irq; ++ SET_NETDEV_DEV(pnetdev, dvobj_to_dev(dvobj)); ++ padapter = rtw_netdev_priv(pnetdev); ++ ++ //step 2. hook HalFunc, allocate HalData ++ if (padapter->chip_type == RTL8188C_8192C) { ++ #ifdef CONFIG_RTL8192C ++ rtl8192ce_set_hal_ops(padapter); ++ #endif ++ } else if (padapter->chip_type == RTL8192D) { ++ #ifdef CONFIG_RTL8192D ++ rtl8192de_set_hal_ops(padapter); ++ #endif ++ } else { ++ DBG_871X("Detect NULL_CHIP_TYPE\n"); ++ goto free_hal_data; ++ } ++ ++ //step 3. initialize the dvobj_priv ++ padapter->intf_start=&pci_intf_start; ++ padapter->intf_stop=&pci_intf_stop; ++ ++ ++ //.2 ++ if ((rtw_init_io_priv(padapter, pci_set_intf_ops)) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n")); ++ goto free_hal_data; ++ } ++ ++ //.3 ++ rtw_hal_read_chip_version(padapter); ++ ++ //.4 ++ rtw_hal_chip_configure(padapter); ++ ++ //step 4. read efuse/eeprom data and get mac_addr ++ rtw_hal_read_chip_info(padapter); ++ ++ if (rtw_handle_dualmac(padapter, 1) != _SUCCESS) ++ goto free_hal_data; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj)) != 0) { ++ goto handle_dualmac; ++ } ++#endif ++ ++ //step 5. ++ if (rtw_init_drv_sw(padapter) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n")); ++ goto free_wdev; ++ } ++ ++ status = rtw_hal_inirp_init(padapter); ++ if(status ==_FAIL){ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize PCI desc ring Failed!\n")); ++ goto free_drv_sw; ++ } ++ ++ rtw_macaddr_cfg(padapter->eeprompriv.mac_addr); ++ rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr); ++ ++ ++ rtw_hal_disable_interrupt(padapter); ++ ++ //step 6. Init pci related configuration ++ rtw_pci_initialize_adapter_common(padapter); ++ ++ DBG_871X("bDriverStopped:%d, bSurpriseRemoved:%d, bup:%d, hw_init_completed:%d\n" ++ ,padapter->bDriverStopped ++ ,padapter->bSurpriseRemoved ++ ,padapter->bup ++ ,padapter->hw_init_completed ++ ); ++ ++ status = _SUCCESS; ++ ++inirp_deinit: ++ if (status != _SUCCESS) ++ rtw_hal_inirp_deinit(padapter); ++free_drv_sw: ++ if (status != _SUCCESS) ++ rtw_free_drv_sw(padapter); ++free_wdev: ++ if (status != _SUCCESS) { ++ #ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_unregister(padapter->rtw_wdev); ++ rtw_wdev_free(padapter->rtw_wdev); ++ #endif ++ } ++handle_dualmac: ++ if (status != _SUCCESS) ++ rtw_handle_dualmac(padapter, 0); ++free_hal_data: ++ if (status != _SUCCESS && padapter->HalData) ++ rtw_mfree(padapter->HalData, sizeof(*(padapter->HalData))); ++free_adapter: ++ if (status != _SUCCESS) { ++ if (pnetdev) ++ rtw_free_netdev(pnetdev); ++ else if (padapter) ++ rtw_vmfree((u8*)padapter, sizeof(*padapter)); ++ padapter = NULL; ++ } ++exit: ++ return padapter; ++} ++ ++static void rtw_pci_if1_deinit(_adapter *if1) ++{ ++ struct net_device *pnetdev = if1->pnetdev; ++ struct mlme_priv *pmlmepriv= &if1->mlmepriv; ++ ++ // padapter->intf_stop(padapter); ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED)) ++ rtw_disassoc_cmd(if1, 0, _FALSE); ++ ++#ifdef CONFIG_AP_MODE ++ free_mlme_ap_info(if1); ++ #ifdef CONFIG_HOSTAPD_MLME ++ hostapd_mode_unload(if1); ++ #endif ++#endif ++ ++ rtw_cancel_all_timer(if1); ++#ifdef CONFIG_WOWLAN ++ if1->pwrctrlpriv.wowlan_mode=_FALSE; ++#endif //CONFIG_WOWLAN ++ rtw_dev_unload(if1); ++ ++ DBG_871X("%s, hw_init_completed=%d\n", __func__, if1->hw_init_completed); ++ ++ //s6. ++ rtw_handle_dualmac(if1, 0); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if (if1->rtw_wdev) ++ rtw_wdev_free(if1->rtw_wdev); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ rtw_hal_inirp_deinit(if1); ++ rtw_free_drv_sw(if1); ++ ++ if(pnetdev) ++ rtw_free_netdev(pnetdev); ++ ++#ifdef CONFIG_PLATFORM_RTD2880B ++ DBG_871X("wlan link down\n"); ++ rtd2885_wlan_netlink_sendMsg("linkdown", "8712"); ++#endif ++} ++ ++/* ++ * drv_init() - a device potentially for us ++ * ++ * notes: drv_init() is called when the bus driver has located a card for us to support. ++ * We accept the new device by returning 0. ++*/ ++static int rtw_drv_init(struct pci_dev *pdev, const struct pci_device_id *did) ++{ ++ int i, err = -ENODEV; ++ ++ int status; ++ _adapter *if1 = NULL, *if2 = NULL; ++ struct dvobj_priv *dvobj; ++ ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("+rtw_drv_init\n")); ++ ++ //step 0. ++ disable_ht_for_spec_devid(did); ++ ++ /* Initialize dvobj_priv */ ++ if ((dvobj = pci_dvobj_init(pdev)) == NULL) { ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("initialize device object priv Failed!\n")); ++ goto exit; ++ } ++ ++ /* Initialize if1 */ ++ if ((if1 = rtw_pci_if1_init(dvobj, pdev, did)) == NULL) { ++ DBG_871X("rtw_pci_if1_init Failed!\n"); ++ goto free_dvobj; ++ } ++ ++ /* Initialize if2 */ ++#ifdef CONFIG_CONCURRENT_MODE ++ if((if2 = rtw_drv_if2_init(if1, pci_set_intf_ops)) == NULL) { ++ goto free_if1; ++ } ++#endif ++ ++#ifdef CONFIG_GLOBAL_UI_PID ++ if (ui_pid[1]!=0) { ++ DBG_871X("ui_pid[1]:%d\n",ui_pid[1]); ++ rtw_signal_process(ui_pid[1], SIGUSR2); ++ } ++#endif ++ ++ //dev_alloc_name && register_netdev ++ if((status = rtw_drv_register_netdev(if1)) != _SUCCESS) { ++ goto free_if1; ++ } ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ hostapd_mode_init(if1); ++#endif ++ ++#ifdef CONFIG_PLATFORM_RTD2880B ++ DBG_871X("wlan link up\n"); ++ rtd2885_wlan_netlink_sendMsg("linkup", "8712"); ++#endif ++ ++#ifdef RTK_DMP_PLATFORM ++ rtw_proc_init_one(if1->pnetdev); ++#endif ++ ++ ++ /* alloc irq */ ++ if (pci_alloc_irq(dvobj) != _SUCCESS) ++ goto free_if2; ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-871x_drv - drv_init, success!\n")); ++ //DBG_871X("-871x_drv - drv_init, success!\n"); ++ ++ status = _SUCCESS; ++ ++free_if2: ++ if(status != _SUCCESS && if2) { ++ #ifdef CONFIG_CONCURRENT_MODE ++ rtw_drv_if2_stop(if2); ++ rtw_drv_if2_free(if2); ++ #endif ++ } ++free_if1: ++ if (status != _SUCCESS && if1) { ++ rtw_pci_if1_deinit(if1); ++ } ++free_dvobj: ++ if (status != _SUCCESS) ++ pci_dvobj_deinit(pdev); ++exit: ++ return status == _SUCCESS?0:-ENODEV; ++} ++ ++/* ++ * dev_remove() - our device is being removed ++*/ ++//rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both ++static void rtw_dev_remove(struct pci_dev *pdev) ++{ ++ struct dvobj_priv *pdvobjpriv = pci_get_drvdata(pdev); ++ _adapter *padapter = pdvobjpriv->if1; ++ struct net_device *pnetdev = padapter->pnetdev; ++ ++_func_exit_; ++ ++ DBG_871X("+rtw_dev_remove\n"); ++ ++ pdvobjpriv->processing_dev_remove = _TRUE; ++ ++ if (unlikely(!padapter)) { ++ return; ++ } ++ ++ rtw_unregister_netdevs(pdvobjpriv); ++ ++ #if 0 ++#ifdef RTK_DMP_PLATFORM ++ padapter->bSurpriseRemoved = _FALSE; // always trate as device exists ++ // this will let the driver to disable it's interrupt ++#else ++ if(pci_drvpriv.drv_registered == _TRUE) ++ { ++ //DBG_871X("r871xu_dev_remove():padapter->bSurpriseRemoved == _TRUE\n"); ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ /*else ++ { ++ //DBG_871X("r871xu_dev_remove():module removed\n"); ++ padapter->hw_init_completed = _FALSE; ++ }*/ ++#endif ++ #endif ++ ++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER) ++ rtw_unregister_early_suspend(&padapter->pwrctrlpriv); ++#endif ++ ++ rtw_pm_set_ips(padapter, IPS_NONE); ++ rtw_pm_set_lps(padapter, PS_MODE_ACTIVE); ++ ++ LeaveAllPowerSaveMode(padapter); ++ ++ rtw_hal_disable_interrupt(padapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ rtw_drv_if2_stop(pdvobjpriv->if2); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ rtw_pci_if1_deinit(padapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++ rtw_drv_if2_free(pdvobjpriv->if2); ++#endif ++ ++ pci_dvobj_deinit(pdev); ++ ++ DBG_871X("-r871xu_dev_remove, done\n"); ++ ++_func_exit_; ++ return; ++} ++ ++ ++static int __init rtw_drv_entry(void) ++{ ++ int ret = 0; ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_entry\n")); ++ DBG_871X("rtw driver version=%s\n", DRIVERVERSION); ++ DBG_871X("Build at: %s %s\n", __DATE__, __TIME__); ++ pci_drvpriv.drv_registered = _TRUE; ++ ++ rtw_suspend_lock_init(); ++ ++ ret = pci_register_driver(&pci_drvpriv.rtw_pci_drv); ++ if (ret) { ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, (": No device found\n")); ++ } ++ ++ return ret; ++} ++ ++static void __exit rtw_drv_halt(void) ++{ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_halt\n")); ++ DBG_871X("+rtw_drv_halt\n"); ++ ++ pci_drvpriv.drv_registered = _FALSE; ++ ++ pci_unregister_driver(&pci_drvpriv.rtw_pci_drv); ++ ++ rtw_suspend_lock_uninit(); ++ DBG_871X("-rtw_drv_halt\n"); ++ ++ rtw_mstat_dump(); ++} ++ ++ ++module_init(rtw_drv_entry); ++module_exit(rtw_drv_halt); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_ops_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_ops_linux.c +new file mode 100644 +index 000000000000..5eed11a6a71c +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/pci_ops_linux.c +@@ -0,0 +1,21 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ *******************************************************************************/ ++#define _PCI_OPS_LINUX_C_ ++ ++#include +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c +new file mode 100644 +index 000000000000..ba82c4db70dd +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c +@@ -0,0 +1,447 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _RECV_OSDEP_C_ ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#ifdef CONFIG_USB_HCI ++#include ++#endif ++ ++//init os related resource in struct recv_priv ++int rtw_os_recv_resource_init(struct recv_priv *precvpriv, _adapter *padapter) ++{ ++ int res=_SUCCESS; ++ ++ return res; ++} ++ ++//alloc os related resource in union recv_frame ++int rtw_os_recv_resource_alloc(_adapter *padapter, union recv_frame *precvframe) ++{ ++ int res=_SUCCESS; ++ ++ precvframe->u.hdr.pkt_newalloc = precvframe->u.hdr.pkt = NULL; ++ ++ return res; ++ ++} ++ ++//free os related resource in union recv_frame ++void rtw_os_recv_resource_free(struct recv_priv *precvpriv) ++{ ++ ++} ++ ++ ++//alloc os related resource in struct recv_buf ++int rtw_os_recvbuf_resource_alloc(_adapter *padapter, struct recv_buf *precvbuf) ++{ ++ int res=_SUCCESS; ++ ++#ifdef CONFIG_USB_HCI ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct usb_device *pusbd = pdvobjpriv->pusbdev; ++ ++ precvbuf->irp_pending = _FALSE; ++ precvbuf->purb = usb_alloc_urb(0, GFP_KERNEL); ++ if(precvbuf->purb == NULL){ ++ res = _FAIL; ++ } ++ ++ precvbuf->pskb = NULL; ++ ++ precvbuf->reuse = _FALSE; ++ ++ precvbuf->pallocated_buf = precvbuf->pbuf = NULL; ++ ++ precvbuf->pdata = precvbuf->phead = precvbuf->ptail = precvbuf->pend = NULL; ++ ++ precvbuf->transfer_len = 0; ++ ++ precvbuf->len = 0; ++ ++ #ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++ precvbuf->pallocated_buf = rtw_usb_buffer_alloc(pusbd, (size_t)precvbuf->alloc_sz, &precvbuf->dma_transfer_addr); ++ precvbuf->pbuf = precvbuf->pallocated_buf; ++ if(precvbuf->pallocated_buf == NULL) ++ return _FAIL; ++ #endif //CONFIG_USE_USB_BUFFER_ALLOC_RX ++ ++#endif //CONFIG_USB_HCI ++ ++ return res; ++} ++ ++//free os related resource in struct recv_buf ++int rtw_os_recvbuf_resource_free(_adapter *padapter, struct recv_buf *precvbuf) ++{ ++ int ret = _SUCCESS; ++ ++#ifdef CONFIG_USB_HCI ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX ++ ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct usb_device *pusbd = pdvobjpriv->pusbdev; ++ ++ rtw_usb_buffer_free(pusbd, (size_t)precvbuf->alloc_sz, precvbuf->pallocated_buf, precvbuf->dma_transfer_addr); ++ precvbuf->pallocated_buf = NULL; ++ precvbuf->dma_transfer_addr = 0; ++ ++#endif //CONFIG_USE_USB_BUFFER_ALLOC_RX ++ ++ if(precvbuf->purb) ++ { ++ //usb_kill_urb(precvbuf->purb); ++ usb_free_urb(precvbuf->purb); ++ } ++ ++#endif //CONFIG_USB_HCI ++ ++ ++ if(precvbuf->pskb) ++ rtw_skb_free(precvbuf->pskb); ++ ++ ++ return ret; ++ ++} ++ ++void rtw_handle_tkip_mic_err(_adapter *padapter,u8 bgroup) ++{ ++#ifdef CONFIG_IOCTL_CFG80211 ++ enum nl80211_key_type key_type; ++#endif ++ union iwreq_data wrqu; ++ struct iw_michaelmicfailure ev; ++ struct mlme_priv* pmlmepriv = &padapter->mlmepriv; ++ struct security_priv *psecuritypriv = &padapter->securitypriv; ++ u32 cur_time = 0; ++ ++ if( psecuritypriv->last_mic_err_time == 0 ) ++ { ++ psecuritypriv->last_mic_err_time = rtw_get_current_time(); ++ } ++ else ++ { ++ cur_time = rtw_get_current_time(); ++ ++ if( cur_time - psecuritypriv->last_mic_err_time < 60*HZ ) ++ { ++ psecuritypriv->btkip_countermeasure = _TRUE; ++ psecuritypriv->last_mic_err_time = 0; ++ psecuritypriv->btkip_countermeasure_time = cur_time; ++ } ++ else ++ { ++ psecuritypriv->last_mic_err_time = rtw_get_current_time(); ++ } ++ } ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if ( bgroup ) ++ { ++ key_type |= NL80211_KEYTYPE_GROUP; ++ } ++ else ++ { ++ key_type |= NL80211_KEYTYPE_PAIRWISE; ++ } ++ ++ cfg80211_michael_mic_failure(padapter->pnetdev, (u8 *)&pmlmepriv->assoc_bssid[ 0 ], key_type, -1, ++ NULL, GFP_ATOMIC); ++#endif ++ ++ _rtw_memset( &ev, 0x00, sizeof( ev ) ); ++ if ( bgroup ) ++ { ++ ev.flags |= IW_MICFAILURE_GROUP; ++ } ++ else ++ { ++ ev.flags |= IW_MICFAILURE_PAIRWISE; ++ } ++ ++ ev.src_addr.sa_family = ARPHRD_ETHER; ++ _rtw_memcpy( ev.src_addr.sa_data, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN ); ++ ++ _rtw_memset( &wrqu, 0x00, sizeof( wrqu ) ); ++ wrqu.data.length = sizeof( ev ); ++ ++ wireless_send_event( padapter->pnetdev, IWEVMICHAELMICFAILURE, &wrqu, (char*) &ev ); ++} ++ ++void rtw_hostapd_mlme_rx(_adapter *padapter, union recv_frame *precv_frame) ++{ ++#ifdef CONFIG_HOSTAPD_MLME ++ _pkt *skb; ++ struct hostapd_priv *phostapdpriv = padapter->phostapdpriv; ++ struct net_device *pmgnt_netdev = phostapdpriv->pmgnt_netdev; ++ ++ RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("+rtw_hostapd_mlme_rx\n")); ++ ++ skb = precv_frame->u.hdr.pkt; ++ ++ if (skb == NULL) ++ return; ++ ++ skb->data = precv_frame->u.hdr.rx_data; ++ skb->tail = precv_frame->u.hdr.rx_tail; ++ skb->len = precv_frame->u.hdr.len; ++ ++ //pskb_copy = rtw_skb_copy(skb); ++// if(skb == NULL) goto _exit; ++ ++ skb->dev = pmgnt_netdev; ++ skb->ip_summed = CHECKSUM_NONE; ++ skb->pkt_type = PACKET_OTHERHOST; ++ //skb->protocol = __constant_htons(0x0019); /*ETH_P_80211_RAW*/ ++ skb->protocol = __constant_htons(0x0003); /*ETH_P_80211_RAW*/ ++ ++ //DBG_871X("(1)data=0x%x, head=0x%x, tail=0x%x, mac_header=0x%x, len=%d\n", skb->data, skb->head, skb->tail, skb->mac_header, skb->len); ++ ++ //skb->mac.raw = skb->data; ++ skb_reset_mac_header(skb); ++ ++ //skb_pull(skb, 24); ++ _rtw_memset(skb->cb, 0, sizeof(skb->cb)); ++ ++ rtw_netif_rx(pmgnt_netdev, skb); ++ ++ precv_frame->u.hdr.pkt = NULL; // set pointer to NULL before rtw_free_recvframe() if call rtw_netif_rx() ++#endif ++} ++ ++int rtw_recv_indicatepkt(_adapter *padapter, union recv_frame *precv_frame) ++{ ++ struct recv_priv *precvpriv; ++ _queue *pfree_recv_queue; ++ _pkt *skb; ++ struct mlme_priv*pmlmepriv = &padapter->mlmepriv; ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++#endif ++ ++#ifdef CONFIG_BR_EXT ++ void *br_port = NULL; ++#endif ++ ++_func_enter_; ++ ++ precvpriv = &(padapter->recvpriv); ++ pfree_recv_queue = &(precvpriv->free_recv_queue); ++ ++#ifdef CONFIG_DRVEXT_MODULE ++ if (drvext_rx_handler(padapter, precv_frame->u.hdr.rx_data, precv_frame->u.hdr.len) == _SUCCESS) ++ { ++ goto _recv_indicatepkt_drop; ++ } ++#endif ++ ++ skb = precv_frame->u.hdr.pkt; ++ if(skb == NULL) ++ { ++ RT_TRACE(_module_recv_osdep_c_,_drv_err_,("rtw_recv_indicatepkt():skb==NULL something wrong!!!!\n")); ++ goto _recv_indicatepkt_drop; ++ } ++ ++ RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():skb != NULL !!!\n")); ++ RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():precv_frame->u.hdr.rx_head=%p precv_frame->hdr.rx_data=%p\n", precv_frame->u.hdr.rx_head, precv_frame->u.hdr.rx_data)); ++ RT_TRACE(_module_recv_osdep_c_,_drv_info_,("precv_frame->hdr.rx_tail=%p precv_frame->u.hdr.rx_end=%p precv_frame->hdr.len=%d \n", precv_frame->u.hdr.rx_tail, precv_frame->u.hdr.rx_end, precv_frame->u.hdr.len)); ++ ++ skb->data = precv_frame->u.hdr.rx_data; ++ ++ skb_set_tail_pointer(skb, precv_frame->u.hdr.len); ++ ++ skb->len = precv_frame->u.hdr.len; ++ ++ RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n skb->head=%p skb->data=%p skb->tail=%p skb->end=%p skb->len=%d\n", skb->head, skb->data, skb->tail, skb->end, skb->len)); ++ ++ if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ++ { ++ _pkt *pskb2=NULL; ++ struct sta_info *psta = NULL; ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib; ++ int bmcast = IS_MCAST(pattrib->dst); ++ ++ //DBG_871X("bmcast=%d\n", bmcast); ++ ++ if(_rtw_memcmp(pattrib->dst, myid(&padapter->eeprompriv), ETH_ALEN)==_FALSE) ++ { ++ //DBG_871X("not ap psta=%p, addr=%pM\n", psta, pattrib->dst); ++ ++ if(bmcast) ++ { ++ psta = rtw_get_bcmc_stainfo(padapter); ++ pskb2 = rtw_skb_clone(skb); ++ } else { ++ psta = rtw_get_stainfo(pstapriv, pattrib->dst); ++ } ++ ++ if(psta) ++ { ++ struct net_device *pnetdev= (struct net_device*)padapter->pnetdev; ++ ++ //DBG_871X("directly forwarding to the rtw_xmit_entry\n"); ++ ++ //skb->ip_summed = CHECKSUM_NONE; ++ skb->dev = pnetdev; ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ skb_set_queue_mapping(skb, rtw_recv_select_queue(skb)); ++#endif //LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35) ++ ++ _rtw_xmit_entry(skb, pnetdev); ++ ++ if(bmcast) ++ skb = pskb2; ++ else ++ goto _recv_indicatepkt_end; ++ } ++ ++ ++ } ++ else// to APself ++ { ++ //DBG_871X("to APSelf\n"); ++ } ++ } ++ ++ ++#ifdef CONFIG_BR_EXT ++ ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ br_port = padapter->pnetdev->br_port; ++#else // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ rcu_read_lock(); ++ br_port = rcu_dereference(padapter->pnetdev->rx_handler_data); ++ rcu_read_unlock(); ++#endif // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) ++ ++ if( br_port && (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) ) ++ { ++ int nat25_handle_frame(_adapter *priv, struct sk_buff *skb); ++ if (nat25_handle_frame(padapter, skb) == -1) { ++ //priv->ext_stats.rx_data_drops++; ++ //DEBUG_ERR("RX DROP: nat25_handle_frame fail!\n"); ++ //return FAIL; ++#if 1 ++ // bypass this frame to upper layer!! ++#else ++ goto _recv_indicatepkt_drop; ++#endif ++ } ++ } ++ ++#endif // CONFIG_BR_EXT ++ ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX ++ if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) { ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ //DBG_871X("CHECKSUM_UNNECESSARY \n"); ++ } else { ++ skb->ip_summed = CHECKSUM_NONE; ++ //DBG_871X("CHECKSUM_NONE(%d, %d) \n", pattrib->tcpchk_valid, pattrib->tcp_chkrpt); ++ } ++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */ ++ ++ skb->ip_summed = CHECKSUM_NONE; ++ ++#endif ++ ++ skb->dev = padapter->pnetdev; ++ skb->protocol = eth_type_trans(skb, padapter->pnetdev); ++ ++ rtw_netif_rx(padapter->pnetdev, skb); ++ ++_recv_indicatepkt_end: ++ ++ precv_frame->u.hdr.pkt = NULL; // pointers to NULL before rtw_free_recvframe() ++ ++ rtw_free_recvframe(precv_frame, pfree_recv_queue); ++ ++ RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n rtw_recv_indicatepkt :after rtw_netif_rx!!!!\n")); ++ ++_func_exit_; ++ ++ return _SUCCESS; ++ ++_recv_indicatepkt_drop: ++ ++ //enqueue back to free_recv_queue ++ if(precv_frame) ++ rtw_free_recvframe(precv_frame, pfree_recv_queue); ++ ++ return _FAIL; ++ ++_func_exit_; ++ ++} ++ ++void rtw_os_read_port(_adapter *padapter, struct recv_buf *precvbuf) ++{ ++ struct recv_priv *precvpriv = &padapter->recvpriv; ++ ++#ifdef CONFIG_USB_HCI ++ ++ precvbuf->ref_cnt--; ++ ++ //free skb in recv_buf ++ rtw_skb_free(precvbuf->pskb); ++ ++ precvbuf->pskb = NULL; ++ precvbuf->reuse = _FALSE; ++ ++ if(precvbuf->irp_pending == _FALSE) ++ { ++ rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf); ++ } ++ ++ ++#endif ++#ifdef CONFIG_SDIO_HCI ++ precvbuf->pskb = NULL; ++#endif ++ ++} ++void _rtw_reordering_ctrl_timeout_handler (void *FunctionContext); ++void _rtw_reordering_ctrl_timeout_handler (void *FunctionContext) ++{ ++ struct recv_reorder_ctrl *preorder_ctrl = (struct recv_reorder_ctrl *)FunctionContext; ++ rtw_reordering_ctrl_timeout_handler(preorder_ctrl); ++} ++ ++void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl) ++{ ++ _adapter *padapter = preorder_ctrl->padapter; ++ ++ _init_timer(&(preorder_ctrl->reordering_ctrl_timer), padapter->pnetdev, _rtw_reordering_ctrl_timeout_handler, preorder_ctrl); ++ ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c +new file mode 100644 +index 000000000000..aed1a6d8059d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c +@@ -0,0 +1,838 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC) ++#include ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)) ++#include ++#else ++#include ++#endif ++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */ ++ ++const char *android_wifi_cmd_str[ANDROID_WIFI_CMD_MAX] = { ++ "START", ++ "STOP", ++ "SCAN-ACTIVE", ++ "SCAN-PASSIVE", ++ "RSSI", ++ "LINKSPEED", ++ "RXFILTER-START", ++ "RXFILTER-STOP", ++ "RXFILTER-ADD", ++ "RXFILTER-REMOVE", ++ "BTCOEXSCAN-START", ++ "BTCOEXSCAN-STOP", ++ "BTCOEXMODE", ++ "SETSUSPENDOPT", ++ "P2P_DEV_ADDR", ++ "SETFWPATH", ++ "SETBAND", ++ "GETBAND", ++ "COUNTRY", ++ "P2P_SET_NOA", ++ "P2P_GET_NOA", ++ "P2P_SET_PS", ++ "SET_AP_WPS_P2P_IE", ++#ifdef PNO_SUPPORT ++ "PNOSSIDCLR", ++ "PNOSETUP ", ++ "PNOFORCE", ++ "PNODEBUG", ++#endif ++ ++ "MACADDR", ++ ++ "BLOCK", ++ "WFD-ENABLE", ++ "WFD-DISABLE", ++ "WFD-SET-TCPPORT", ++ "WFD-SET-MAXTPUT", ++ "WFD-SET-DEVTYPE", ++}; ++ ++#ifdef PNO_SUPPORT ++#define PNO_TLV_PREFIX 'S' ++#define PNO_TLV_VERSION '1' ++#define PNO_TLV_SUBVERSION '2' ++#define PNO_TLV_RESERVED '0' ++#define PNO_TLV_TYPE_SSID_IE 'S' ++#define PNO_TLV_TYPE_TIME 'T' ++#define PNO_TLV_FREQ_REPEAT 'R' ++#define PNO_TLV_FREQ_EXPO_MAX 'M' ++ ++typedef struct cmd_tlv { ++ char prefix; ++ char version; ++ char subver; ++ char reserved; ++} cmd_tlv_t; ++#endif /* PNO_SUPPORT */ ++ ++typedef struct android_wifi_priv_cmd { ++ ++#ifdef CONFIG_COMPAT ++ compat_uptr_t buf; ++#else ++ char *buf; ++#endif ++ ++ int used_len; ++ int total_len; ++} android_wifi_priv_cmd; ++ ++/** ++ * Local (static) functions and variables ++ */ ++ ++/* Initialize g_wifi_on to 1 so dhd_bus_start will be called for the first ++ * time (only) in dhd_open, subsequential wifi on will be handled by ++ * wl_android_wifi_on ++ */ ++static int g_wifi_on = _TRUE; ++ ++ ++#ifdef PNO_SUPPORT ++static int wl_android_set_pno_setup(struct net_device *dev, char *command, int total_len) ++{ ++ wlc_ssid_t ssids_local[MAX_PFN_LIST_COUNT]; ++ int res = -1; ++ int nssid = 0; ++ cmd_tlv_t *cmd_tlv_temp; ++ char *str_ptr; ++ int tlv_size_left; ++ int pno_time = 0; ++ int pno_repeat = 0; ++ int pno_freq_expo_max = 0; ++ ++#ifdef PNO_SET_DEBUG ++ int i; ++ char pno_in_example[] = { ++ 'P', 'N', 'O', 'S', 'E', 'T', 'U', 'P', ' ', ++ 'S', '1', '2', '0', ++ 'S', ++ 0x05, ++ 'd', 'l', 'i', 'n', 'k', ++ 'S', ++ 0x04, ++ 'G', 'O', 'O', 'G', ++ 'T', ++ '0', 'B', ++ 'R', ++ '2', ++ 'M', ++ '2', ++ 0x00 ++ }; ++#endif /* PNO_SET_DEBUG */ ++ ++ DHD_INFO(("%s: command=%s, len=%d\n", __FUNCTION__, command, total_len)); ++ ++ if (total_len < (strlen(CMD_PNOSETUP_SET) + sizeof(cmd_tlv_t))) { ++ DBG_871X("%s argument=%d less min size\n", __FUNCTION__, total_len); ++ goto exit_proc; ++ } ++ ++#ifdef PNO_SET_DEBUG ++ memcpy(command, pno_in_example, sizeof(pno_in_example)); ++ for (i = 0; i < sizeof(pno_in_example); i++) ++ printf("%02X ", command[i]); ++ printf("\n"); ++ total_len = sizeof(pno_in_example); ++#endif ++ ++ str_ptr = command + strlen(CMD_PNOSETUP_SET); ++ tlv_size_left = total_len - strlen(CMD_PNOSETUP_SET); ++ ++ cmd_tlv_temp = (cmd_tlv_t *)str_ptr; ++ memset(ssids_local, 0, sizeof(ssids_local)); ++ ++ if ((cmd_tlv_temp->prefix == PNO_TLV_PREFIX) && ++ (cmd_tlv_temp->version == PNO_TLV_VERSION) && ++ (cmd_tlv_temp->subver == PNO_TLV_SUBVERSION)) { ++ ++ str_ptr += sizeof(cmd_tlv_t); ++ tlv_size_left -= sizeof(cmd_tlv_t); ++ ++ if ((nssid = wl_iw_parse_ssid_list_tlv(&str_ptr, ssids_local, ++ MAX_PFN_LIST_COUNT, &tlv_size_left)) <= 0) { ++ DBG_871X("SSID is not presented or corrupted ret=%d\n", nssid); ++ goto exit_proc; ++ } else { ++ if ((str_ptr[0] != PNO_TLV_TYPE_TIME) || (tlv_size_left <= 1)) { ++ DBG_871X("%s scan duration corrupted field size %d\n", ++ __FUNCTION__, tlv_size_left); ++ goto exit_proc; ++ } ++ str_ptr++; ++ pno_time = simple_strtoul(str_ptr, &str_ptr, 16); ++ DHD_INFO(("%s: pno_time=%d\n", __FUNCTION__, pno_time)); ++ ++ if (str_ptr[0] != 0) { ++ if ((str_ptr[0] != PNO_TLV_FREQ_REPEAT)) { ++ DBG_871X("%s pno repeat : corrupted field\n", ++ __FUNCTION__); ++ goto exit_proc; ++ } ++ str_ptr++; ++ pno_repeat = simple_strtoul(str_ptr, &str_ptr, 16); ++ DHD_INFO(("%s :got pno_repeat=%d\n", __FUNCTION__, pno_repeat)); ++ if (str_ptr[0] != PNO_TLV_FREQ_EXPO_MAX) { ++ DBG_871X("%s FREQ_EXPO_MAX corrupted field size\n", ++ __FUNCTION__); ++ goto exit_proc; ++ } ++ str_ptr++; ++ pno_freq_expo_max = simple_strtoul(str_ptr, &str_ptr, 16); ++ DHD_INFO(("%s: pno_freq_expo_max=%d\n", ++ __FUNCTION__, pno_freq_expo_max)); ++ } ++ } ++ } else { ++ DBG_871X("%s get wrong TLV command\n", __FUNCTION__); ++ goto exit_proc; ++ } ++ ++ res = dhd_dev_pno_set(dev, ssids_local, nssid, pno_time, pno_repeat, pno_freq_expo_max); ++ ++exit_proc: ++ return res; ++} ++#endif /* PNO_SUPPORT */ ++ ++int rtw_android_cmdstr_to_num(char *cmdstr) ++{ ++ int cmd_num; ++ for(cmd_num=0 ; cmd_nummlmepriv); ++ struct wlan_network *pcur_network = &pmlmepriv->cur_network; ++ int bytes_written = 0; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) { ++ bytes_written += snprintf(&command[bytes_written], total_len, "%s rssi %d", ++ pcur_network->network.Ssid.Ssid, padapter->recvpriv.rssi); ++ } ++ ++ return bytes_written; ++} ++ ++int rtw_android_get_link_speed(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(net); ++ struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); ++ struct wlan_network *pcur_network = &pmlmepriv->cur_network; ++ int bytes_written = 0; ++ u16 link_speed = 0; ++ ++ link_speed = rtw_get_cur_max_rate(padapter)/10; ++ bytes_written = snprintf(command, total_len, "LinkSpeed %d", link_speed); ++ ++ return bytes_written; ++} ++ ++int rtw_android_get_macaddr(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(net); ++ int bytes_written = 0; ++ ++ bytes_written = snprintf(command, total_len, "Macaddr = "MAC_FMT, MAC_ARG(net->dev_addr)); ++ return bytes_written; ++} ++ ++int rtw_android_set_country(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(net); ++ char *country_code = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_COUNTRY]) + 1; ++ int ret = _FAIL; ++ ++ ret = rtw_set_country(adapter, country_code); ++ ++ return (ret==_SUCCESS)?0:-1; ++} ++ ++int rtw_android_get_p2p_dev_addr(struct net_device *net, char *command, int total_len) ++{ ++ int bytes_written = 0; ++ ++ //We use the same address as our HW MAC address ++ _rtw_memcpy(command, net->dev_addr, ETH_ALEN); ++ ++ bytes_written = ETH_ALEN; ++ return bytes_written; ++} ++ ++int rtw_android_set_block(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(net); ++ char *block_value = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_BLOCK]) + 1; ++ ++ #ifdef CONFIG_IOCTL_CFG80211 ++ wdev_to_priv(adapter->rtw_wdev)->block = (*block_value=='0')?_FALSE:_TRUE; ++ #endif ++ ++ return 0; ++} ++ ++int rtw_android_setband(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(net); ++ char *arg = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_SETBAND]) + 1; ++ u32 band = GHZ_MAX; ++ int ret = _FAIL; ++ ++ sscanf(arg, "%u", &band); ++ ret = rtw_set_band(adapter, band); ++ ++ return (ret==_SUCCESS)?0:-1; ++} ++ ++int rtw_android_getband(struct net_device *net, char *command, int total_len) ++{ ++ _adapter *adapter = (_adapter *)rtw_netdev_priv(net); ++ int bytes_written = 0; ++ ++ bytes_written = snprintf(command, total_len, "%u", adapter->setband); ++ ++ return bytes_written; ++} ++ ++int get_int_from_command( char* pcmd ) ++{ ++ int i = 0; ++ ++ for( i = 0; i < strlen( pcmd ); i++ ) ++ { ++ if ( pcmd[ i ] == '=' ) ++ { ++ // Skip the '=' and space characters. ++ i += 2; ++ break; ++ } ++ } ++ return ( rtw_atoi( pcmd + i ) ); ++} ++ ++int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd) ++{ ++ int ret = 0; ++ char *command = NULL; ++ int cmd_num; ++ int bytes_written = 0; ++ android_wifi_priv_cmd priv_cmd; ++ ++ rtw_lock_suspend(); ++ ++ if (!ifr->ifr_data) { ++ ret = -EINVAL; ++ goto exit; ++ } ++ if (copy_from_user(&priv_cmd, ifr->ifr_data, sizeof(android_wifi_priv_cmd))) { ++ ret = -EFAULT; ++ goto exit; ++ } ++ ++ command = rtw_zmalloc(priv_cmd.total_len); ++ if (!command) ++ { ++ DBG_871X("%s: failed to allocate memory\n", __FUNCTION__); ++ ret = -ENOMEM; ++ goto exit; ++ } ++ ++ if (!access_ok(VERIFY_READ, priv_cmd.buf, priv_cmd.total_len)){ ++ DBG_871X("%s: failed to access memory\n", __FUNCTION__); ++ ret = -EFAULT; ++ goto exit; ++ } ++ if (copy_from_user(command, (void *)priv_cmd.buf, priv_cmd.total_len)) { ++ ret = -EFAULT; ++ goto exit; ++ } ++ ++ DBG_871X("%s: Android private cmd \"%s\" on %s\n" ++ , __FUNCTION__, command, ifr->ifr_name); ++ ++ cmd_num = rtw_android_cmdstr_to_num(command); ++ ++ switch(cmd_num) { ++ case ANDROID_WIFI_CMD_START: ++ //bytes_written = wl_android_wifi_on(net); ++ goto response; ++ case ANDROID_WIFI_CMD_SETFWPATH: ++ goto response; ++ } ++ ++ if (!g_wifi_on) { ++ DBG_871X("%s: Ignore private cmd \"%s\" - iface %s is down\n" ++ ,__FUNCTION__, command, ifr->ifr_name); ++ ret = 0; ++ goto exit; ++ } ++ ++ switch(cmd_num) { ++ ++ case ANDROID_WIFI_CMD_STOP: ++ //bytes_written = wl_android_wifi_off(net); ++ break; ++ ++ case ANDROID_WIFI_CMD_SCAN_ACTIVE: ++ //rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_ACTIVE); ++#ifdef CONFIG_PLATFORM_MSTAR ++#ifdef CONFIG_IOCTL_CFG80211 ++ (wdev_to_priv(net->ieee80211_ptr))->bandroid_scan = _TRUE; ++#endif //CONFIG_IOCTL_CFG80211 ++#endif //CONFIG_PLATFORM_MSTAR ++ break; ++ case ANDROID_WIFI_CMD_SCAN_PASSIVE: ++ //rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_PASSIVE); ++ break; ++ ++ case ANDROID_WIFI_CMD_RSSI: ++ bytes_written = rtw_android_get_rssi(net, command, priv_cmd.total_len); ++ break; ++ case ANDROID_WIFI_CMD_LINKSPEED: ++ bytes_written = rtw_android_get_link_speed(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_MACADDR: ++ bytes_written = rtw_android_get_macaddr(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_BLOCK: ++ bytes_written = rtw_android_set_block(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_RXFILTER_START: ++ //bytes_written = net_os_set_packet_filter(net, 1); ++ break; ++ case ANDROID_WIFI_CMD_RXFILTER_STOP: ++ //bytes_written = net_os_set_packet_filter(net, 0); ++ break; ++ case ANDROID_WIFI_CMD_RXFILTER_ADD: ++ //int filter_num = *(command + strlen(CMD_RXFILTER_ADD) + 1) - '0'; ++ //bytes_written = net_os_rxfilter_add_remove(net, TRUE, filter_num); ++ break; ++ case ANDROID_WIFI_CMD_RXFILTER_REMOVE: ++ //int filter_num = *(command + strlen(CMD_RXFILTER_REMOVE) + 1) - '0'; ++ //bytes_written = net_os_rxfilter_add_remove(net, FALSE, filter_num); ++ break; ++ ++ case ANDROID_WIFI_CMD_BTCOEXSCAN_START: ++ /* TBD: BTCOEXSCAN-START */ ++ break; ++ case ANDROID_WIFI_CMD_BTCOEXSCAN_STOP: ++ /* TBD: BTCOEXSCAN-STOP */ ++ break; ++ case ANDROID_WIFI_CMD_BTCOEXMODE: ++ #if 0 ++ uint mode = *(command + strlen(CMD_BTCOEXMODE) + 1) - '0'; ++ if (mode == 1) ++ net_os_set_packet_filter(net, 0); /* DHCP starts */ ++ else ++ net_os_set_packet_filter(net, 1); /* DHCP ends */ ++#ifdef WL_CFG80211 ++ bytes_written = wl_cfg80211_set_btcoex_dhcp(net, command); ++#endif ++ #endif ++ break; ++ ++ case ANDROID_WIFI_CMD_SETSUSPENDOPT: ++ //bytes_written = wl_android_set_suspendopt(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_SETBAND: ++ bytes_written = rtw_android_setband(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_GETBAND: ++ bytes_written = rtw_android_getband(net, command, priv_cmd.total_len); ++ break; ++ ++ case ANDROID_WIFI_CMD_COUNTRY: ++ bytes_written = rtw_android_set_country(net, command, priv_cmd.total_len); ++ break; ++ ++#ifdef PNO_SUPPORT ++ case ANDROID_WIFI_CMD_PNOSSIDCLR_SET: ++ //bytes_written = dhd_dev_pno_reset(net); ++ break; ++ case ANDROID_WIFI_CMD_PNOSETUP_SET: ++ //bytes_written = wl_android_set_pno_setup(net, command, priv_cmd.total_len); ++ break; ++ case ANDROID_WIFI_CMD_PNOENABLE_SET: ++ //uint pfn_enabled = *(command + strlen(CMD_PNOENABLE_SET) + 1) - '0'; ++ //bytes_written = dhd_dev_pno_enable(net, pfn_enabled); ++ break; ++#endif ++ ++ case ANDROID_WIFI_CMD_P2P_DEV_ADDR: ++ bytes_written = rtw_android_get_p2p_dev_addr(net, command, priv_cmd.total_len); ++ break; ++ case ANDROID_WIFI_CMD_P2P_SET_NOA: ++ //int skip = strlen(CMD_P2P_SET_NOA) + 1; ++ //bytes_written = wl_cfg80211_set_p2p_noa(net, command + skip, priv_cmd.total_len - skip); ++ break; ++ case ANDROID_WIFI_CMD_P2P_GET_NOA: ++ //bytes_written = wl_cfg80211_get_p2p_noa(net, command, priv_cmd.total_len); ++ break; ++ case ANDROID_WIFI_CMD_P2P_SET_PS: ++ //int skip = strlen(CMD_P2P_SET_PS) + 1; ++ //bytes_written = wl_cfg80211_set_p2p_ps(net, command + skip, priv_cmd.total_len - skip); ++ break; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ case ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE: ++ { ++ int skip = strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE]) + 3; ++ bytes_written = rtw_cfg80211_set_mgnt_wpsp2pie(net, command + skip, priv_cmd.total_len - skip, *(command + skip - 2) - '0'); ++ break; ++ } ++#endif //CONFIG_IOCTL_CFG80211 ++ ++#ifdef CONFIG_WFD ++ case ANDROID_WIFI_CMD_WFD_ENABLE: ++ { ++ // Commented by Albert 2012/07/24 ++ // We can enable the WFD function by using the following command: ++ // wpa_cli driver wfd-enable ++ ++ struct wifi_display_info *pwfd_info; ++ _adapter* padapter = ( _adapter * ) rtw_netdev_priv(net); ++ ++ pwfd_info = &padapter->wfd_info; ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ pwfd_info->wfd_enable = _TRUE; ++ break; ++ } ++ ++ case ANDROID_WIFI_CMD_WFD_DISABLE: ++ { ++ // Commented by Albert 2012/07/24 ++ // We can disable the WFD function by using the following command: ++ // wpa_cli driver wfd-disable ++ ++ struct wifi_display_info *pwfd_info; ++ _adapter* padapter = ( _adapter * ) rtw_netdev_priv(net); ++ ++ pwfd_info = &padapter->wfd_info; ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ pwfd_info->wfd_enable = _FALSE; ++ break; ++ } ++ case ANDROID_WIFI_CMD_WFD_SET_TCPPORT: ++ { ++ // Commented by Albert 2012/07/24 ++ // We can set the tcp port number by using the following command: ++ // wpa_cli driver wfd-set-tcpport = 554 ++ ++ struct wifi_display_info *pwfd_info; ++ _adapter* padapter = ( _adapter * ) rtw_netdev_priv(net); ++ ++ pwfd_info = &padapter->wfd_info; ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ pwfd_info->rtsp_ctrlport = ( u16 ) get_int_from_command( priv_cmd.buf ); ++ break; ++ } ++ case ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT: ++ { ++ ++ ++ break; ++ } ++ case ANDROID_WIFI_CMD_WFD_SET_DEVTYPE: ++ { ++ // Commented by Albert 2012/08/28 ++ // Specify the WFD device type ( WFD source/primary sink ) ++ ++ struct wifi_display_info *pwfd_info; ++ _adapter* padapter = ( _adapter * ) rtw_netdev_priv(net); ++ ++ pwfd_info = &padapter->wfd_info; ++ if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 ) ++ { ++ pwfd_info->wfd_device_type = ( u8 ) get_int_from_command( priv_cmd.buf ); ++ ++ pwfd_info->wfd_device_type &= WFD_DEVINFO_DUAL; ++ } ++ break; ++ } ++#endif ++ default: ++ DBG_871X("Unknown PRIVATE command %s - ignored\n", command); ++ snprintf(command, 3, "OK"); ++ bytes_written = strlen("OK"); ++ } ++ ++response: ++ if (bytes_written >= 0) { ++ if ((bytes_written == 0) && (priv_cmd.total_len > 0)) ++ command[0] = '\0'; ++ if (bytes_written >= priv_cmd.total_len) { ++ DBG_871X("%s: bytes_written = %d\n", __FUNCTION__, bytes_written); ++ bytes_written = priv_cmd.total_len; ++ } else { ++ bytes_written++; ++ } ++ priv_cmd.used_len = bytes_written; ++ if (copy_to_user((void *)priv_cmd.buf, command, bytes_written)) { ++ DBG_871X("%s: failed to copy data to user buffer\n", __FUNCTION__); ++ ret = -EFAULT; ++ } ++ } ++ else { ++ ret = bytes_written; ++ } ++ ++exit: ++ rtw_unlock_suspend(); ++ if (command) { ++ rtw_mfree(command, priv_cmd.total_len); ++ } ++ ++ return ret; ++} ++ ++ ++/** ++ * Functions for Android WiFi card detection ++ */ ++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC) ++ ++static int g_wifidev_registered = 0; ++static struct semaphore wifi_control_sem; ++static struct wifi_platform_data *wifi_control_data = NULL; ++static struct resource *wifi_irqres = NULL; ++ ++static int wifi_add_dev(void); ++static void wifi_del_dev(void); ++ ++int rtw_android_wifictrl_func_add(void) ++{ ++ int ret = 0; ++ sema_init(&wifi_control_sem, 0); ++ ++ ret = wifi_add_dev(); ++ if (ret) { ++ DBG_871X("%s: platform_driver_register failed\n", __FUNCTION__); ++ return ret; ++ } ++ g_wifidev_registered = 1; ++ ++ /* Waiting callback after platform_driver_register is done or exit with error */ ++ if (down_timeout(&wifi_control_sem, msecs_to_jiffies(1000)) != 0) { ++ ret = -EINVAL; ++ DBG_871X("%s: platform_driver_register timeout\n", __FUNCTION__); ++ } ++ ++ return ret; ++} ++ ++void rtw_android_wifictrl_func_del(void) ++{ ++ if (g_wifidev_registered) ++ { ++ wifi_del_dev(); ++ g_wifidev_registered = 0; ++ } ++} ++ ++void *wl_android_prealloc(int section, unsigned long size) ++{ ++ void *alloc_ptr = NULL; ++ if (wifi_control_data && wifi_control_data->mem_prealloc) { ++ alloc_ptr = wifi_control_data->mem_prealloc(section, size); ++ if (alloc_ptr) { ++ DBG_871X("success alloc section %d\n", section); ++ if (size != 0L) ++ memset(alloc_ptr, 0, size); ++ return alloc_ptr; ++ } ++ } ++ ++ DBG_871X("can't alloc section %d\n", section); ++ return NULL; ++} ++ ++int wifi_get_irq_number(unsigned long *irq_flags_ptr) ++{ ++ if (wifi_irqres) { ++ *irq_flags_ptr = wifi_irqres->flags & IRQF_TRIGGER_MASK; ++ return (int)wifi_irqres->start; ++ } ++#ifdef CUSTOM_OOB_GPIO_NUM ++ return CUSTOM_OOB_GPIO_NUM; ++#else ++ return -1; ++#endif ++} ++ ++int wifi_set_power(int on, unsigned long msec) ++{ ++ DBG_871X("%s = %d\n", __FUNCTION__, on); ++ if (wifi_control_data && wifi_control_data->set_power) { ++ wifi_control_data->set_power(on); ++ } ++ if (msec) ++ msleep(msec); ++ return 0; ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)) ++int wifi_get_mac_addr(unsigned char *buf) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ if (!buf) ++ return -EINVAL; ++ if (wifi_control_data && wifi_control_data->get_mac_addr) { ++ return wifi_control_data->get_mac_addr(buf); ++ } ++ return -EOPNOTSUPP; ++} ++#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)) */ ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)) || defined(COMPAT_KERNEL_RELEASE) ++void *wifi_get_country_code(char *ccode) ++{ ++ DBG_871X("%s\n", __FUNCTION__); ++ if (!ccode) ++ return NULL; ++ if (wifi_control_data && wifi_control_data->get_country_code) { ++ return wifi_control_data->get_country_code(ccode); ++ } ++ return NULL; ++} ++#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)) */ ++ ++static int wifi_set_carddetect(int on) ++{ ++ DBG_871X("%s = %d\n", __FUNCTION__, on); ++ if (wifi_control_data && wifi_control_data->set_carddetect) { ++ wifi_control_data->set_carddetect(on); ++ } ++ return 0; ++} ++ ++static int wifi_probe(struct platform_device *pdev) ++{ ++ struct wifi_platform_data *wifi_ctrl = ++ (struct wifi_platform_data *)(pdev->dev.platform_data); ++ ++ DBG_871X("## %s\n", __FUNCTION__); ++ wifi_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "bcmdhd_wlan_irq"); ++ if (wifi_irqres == NULL) ++ wifi_irqres = platform_get_resource_byname(pdev, ++ IORESOURCE_IRQ, "bcm4329_wlan_irq"); ++ wifi_control_data = wifi_ctrl; ++ ++ wifi_set_power(1, 0); /* Power On */ ++ wifi_set_carddetect(1); /* CardDetect (0->1) */ ++ ++ up(&wifi_control_sem); ++ return 0; ++} ++ ++static int wifi_remove(struct platform_device *pdev) ++{ ++ struct wifi_platform_data *wifi_ctrl = ++ (struct wifi_platform_data *)(pdev->dev.platform_data); ++ ++ DBG_871X("## %s\n", __FUNCTION__); ++ wifi_control_data = wifi_ctrl; ++ ++ wifi_set_power(0, 0); /* Power Off */ ++ wifi_set_carddetect(0); /* CardDetect (1->0) */ ++ ++ up(&wifi_control_sem); ++ return 0; ++} ++ ++static int wifi_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ DBG_871X("##> %s\n", __FUNCTION__); ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 39)) && defined(OOB_INTR_ONLY) ++ bcmsdh_oob_intr_set(0); ++#endif ++ return 0; ++} ++ ++static int wifi_resume(struct platform_device *pdev) ++{ ++ DBG_871X("##> %s\n", __FUNCTION__); ++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 39)) && defined(OOB_INTR_ONLY) ++ if (dhd_os_check_if_up(bcmsdh_get_drvdata())) ++ bcmsdh_oob_intr_set(1); ++#endif ++ return 0; ++} ++ ++/* temporarily use these two */ ++static struct platform_driver wifi_device = { ++ .probe = wifi_probe, ++ .remove = wifi_remove, ++ .suspend = wifi_suspend, ++ .resume = wifi_resume, ++ .driver = { ++ .name = "bcmdhd_wlan", ++ } ++}; ++ ++static struct platform_driver wifi_device_legacy = { ++ .probe = wifi_probe, ++ .remove = wifi_remove, ++ .suspend = wifi_suspend, ++ .resume = wifi_resume, ++ .driver = { ++ .name = "bcm4329_wlan", ++ } ++}; ++ ++static int wifi_add_dev(void) ++{ ++ DBG_871X("## Calling platform_driver_register\n"); ++ platform_driver_register(&wifi_device); ++ platform_driver_register(&wifi_device_legacy); ++ return 0; ++} ++ ++static void wifi_del_dev(void) ++{ ++ DBG_871X("## Unregister platform_driver_register\n"); ++ platform_driver_unregister(&wifi_device); ++ platform_driver_unregister(&wifi_device_legacy); ++} ++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */ +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c +new file mode 100644 +index 000000000000..09a5238c29a0 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c +@@ -0,0 +1,1655 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _HCI_INTF_C_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifndef CONFIG_USB_HCI ++ ++#error "CONFIG_USB_HCI shall be on!\n" ++ ++#endif ++ ++#include ++#include ++#include ++#include ++#ifdef CONFIG_PLATFORM_RTK_DMP ++#include ++#endif ++ ++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS) ++ ++#error "Shall be Linux or Windows, but not both!\n" ++ ++#endif ++ ++#ifdef CONFIG_80211N_HT ++extern int rtw_ht_enable; ++extern int rtw_cbw40_enable; ++extern int rtw_ampdu_enable;//for enable tx_ampdu ++#endif ++ ++#ifdef CONFIG_GLOBAL_UI_PID ++int ui_pid[3] = {0, 0, 0}; ++#endif ++ ++ ++extern int pm_netdev_open(struct net_device *pnetdev,u8 bnormal); ++static int rtw_suspend(struct usb_interface *intf, pm_message_t message); ++static int rtw_resume(struct usb_interface *intf); ++int rtw_resume_process(_adapter *padapter); ++ ++ ++static int rtw_drv_init(struct usb_interface *pusb_intf,const struct usb_device_id *pdid); ++static void rtw_dev_remove(struct usb_interface *pusb_intf); ++ ++#define USB_VENDER_ID_REALTEK 0x0BDA ++ ++/* DID_USB_v915_20121224 */ ++#define RTL8192C_USB_IDS \ ++ /*=== Realtek demoboard ===*/ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191)},/* Default ID */ \ ++ /****** 8188CUS ********/ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8176)},/* 8188cu 1*1 dongole */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8170)},/* 8188CE-VAU USB minCard */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817E)},/* 8188CE-VAU USB minCard */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817A)},/* 8188cu Slim Solo */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817B)},/* 8188cu Slim Combo */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817D)},/* 8188RU High-power USB Dongle */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754)},/* 8188 Combo for BC4 */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817F)},/* 8188RU */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818A)},/* RTL8188CUS-VL */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x018A)},/* RTL8188CTV */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x17C0)}, /* RTK demoboard - USB-N10E */ \ ++ /****** 8192CUS ********/ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177)},/* 8191cu 1*2 */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8178)},/* 8192cu 2*2 */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817C)},/* 8192CE-VAU USB minCard */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191)},/* 8192CU 2*2 */ \ ++ {USB_DEVICE(0x1058, 0x0631)},/* Alpha, 8192CU */ \ ++ /*=== Customer ID ===*/ \ ++ /****** 8188CUS Dongle ********/ \ ++ {USB_DEVICE(0x2019, 0xED17)},/* PCI - Edimax */ \ ++ {USB_DEVICE(0x0DF6, 0x0052)},/* Sitecom - Edimax */ \ ++ {USB_DEVICE(0x7392, 0x7811)},/* Edimax - Edimax */ \ ++ {USB_DEVICE(0x07B8, 0x8189)},/* Abocom - Abocom */ \ ++ {USB_DEVICE(0x0EB0, 0x9071)},/* NO Brand - Etop */ \ ++ {USB_DEVICE(0x06F8, 0xE033)},/* Hercules - Edimax */ \ ++ {USB_DEVICE(0x103C, 0x1629)},/* HP - Lite-On ,8188CUS Slim Combo */ \ ++ {USB_DEVICE(0x2001, 0x3308)},/* D-Link - Alpha */ \ ++ {USB_DEVICE(0x050D, 0x1102)},/* Belkin - Edimax */ \ ++ {USB_DEVICE(0x2019, 0xAB2A)},/* Planex - Abocom */ \ ++ {USB_DEVICE(0x20F4, 0x648B)},/* TRENDnet - Cameo */ \ ++ {USB_DEVICE(0x4855, 0x0090)},/* - Feixun */ \ ++ {USB_DEVICE(0x13D3, 0x3357)},/* - AzureWave */ \ ++ {USB_DEVICE(0x0DF6, 0x005C)},/* Sitecom - Edimax */ \ ++ {USB_DEVICE(0x0BDA, 0x5088)},/* Thinkware - CC&C */ \ ++ {USB_DEVICE(0x4856, 0x0091)},/* NetweeN - Feixun */ \ ++ {USB_DEVICE(0x0846, 0x9041)}, /* Netgear - Cameo */ \ ++ {USB_DEVICE(0x2019, 0x4902)},/* Planex - Etop */ \ ++ {USB_DEVICE(0x2019, 0xAB2E)},/* SW-WF02-AD15 -Abocom */ \ ++ {USB_DEVICE(0x2001, 0x330B)}, /* D-LINK - T&W */ \ ++ {USB_DEVICE(0xCDAB, 0x8010)}, /* - - compare */ \ ++ {USB_DEVICE(0x0B05, 0x17BA)}, /* ASUS - Edimax */ \ ++ {USB_DEVICE(0x0BDA, 0x1E1E)}, /* Intel - - */ \ ++ {USB_DEVICE(0x04BB, 0x094c)}, /* I-O DATA - Edimax */ \ ++ /****** 8188CTV ********/ \ ++ {USB_DEVICE(0xCDAB, 0x8011)}, /* - - compare */ \ ++ {USB_DEVICE(0x0BDA, 0x0A8A)}, /* Sony - Foxconn */ \ ++ /****** 8188 RU ********/ \ ++ {USB_DEVICE(0x0BDA, 0x317F)},/* Netcore,Netcore */ \ ++ /****** 8188CE-VAU ********/ \ ++ {USB_DEVICE(0x13D3, 0x3359)},/* - Azwave */ \ ++ {USB_DEVICE(0x13D3, 0x3358)},/* - Azwave */ \ ++ /****** 8188CUS Slim Solo********/ \ ++ {USB_DEVICE(0x04F2, 0xAFF7)},/* XAVI - XAVI */ \ ++ {USB_DEVICE(0x04F2, 0xAFF9)},/* XAVI - XAVI */ \ ++ {USB_DEVICE(0x04F2, 0xAFFA)},/* XAVI - XAVI */ \ ++ /****** 8188CUS Slim Combo ********/ \ ++ {USB_DEVICE(0x04F2, 0xAFF8)},/* XAVI - XAVI */ \ ++ {USB_DEVICE(0x04F2, 0xAFFB)},/* XAVI - XAVI */ \ ++ {USB_DEVICE(0x04F2, 0xAFFC)},/* XAVI - XAVI */ \ ++ {USB_DEVICE(0x2019, 0x1201)},/* Planex - Vencer */ \ ++ /****** 8192CUS Dongle ********/ \ ++ {USB_DEVICE(0x2001, 0x3307)},/* D-Link - Cameo */ \ ++ {USB_DEVICE(0x2001, 0x330A)},/* D-Link - Alpha */ \ ++ {USB_DEVICE(0x2001, 0x3309)},/* D-Link - Alpha */ \ ++ {USB_DEVICE(0x2001, 0x330D)},/* D-Link - DWA 131 */ \ ++ {USB_DEVICE(0x0586, 0x341F)},/* Zyxel - Abocom */ \ ++ {USB_DEVICE(0x7392, 0x7822)},/* Edimax - Edimax */ \ ++ {USB_DEVICE(0x2019, 0xAB2B)},/* Planex - Abocom */ \ ++ {USB_DEVICE(0x07B8, 0x8178)},/* Abocom - Abocom */ \ ++ {USB_DEVICE(0x07AA, 0x0056)},/* ATKK - Gemtek */ \ ++ {USB_DEVICE(0x4855, 0x0091)},/* - Feixun */ \ ++ {USB_DEVICE(0x050D, 0x2102)},/* Belkin - Sercomm */ \ ++ {USB_DEVICE(0x050D, 0x2103)},/* Belkin - Edimax */ \ ++ {USB_DEVICE(0x20F4, 0x624D)},/* TRENDnet */ \ ++ {USB_DEVICE(0x0DF6, 0x0061)},/* Sitecom - Edimax */ \ ++ {USB_DEVICE(0x0B05, 0x17AB)},/* ASUS - Edimax */ \ ++ {USB_DEVICE(0x0846, 0x9021)},/* Netgear - Sercomm */ \ ++ {USB_DEVICE(0x0846, 0xF001)}, /* Netgear - Sercomm */ \ ++ {USB_DEVICE(0x0E66, 0x0019)},/* Hawking,Edimax */ \ ++ {USB_DEVICE(0x0E66, 0x0020)}, /* Hawking - Edimax */ \ ++ {USB_DEVICE(0x050D, 0x1004)}, /* Belkin - Edimax */ \ ++ {USB_DEVICE(0x0BDA, 0x2E2E)}, /* Intel - - */ \ ++ {USB_DEVICE(0x2357, 0x0100)}, /* TP-Link - TP-Link */ \ ++ {USB_DEVICE(0x06F8, 0xE035)}, /* Hercules - Edimax */ \ ++ {USB_DEVICE(0x04BB, 0x0950)}, /* IO-DATA - Edimax */ \ ++ {USB_DEVICE(0x0DF6, 0x0070)}, /* Sitecom - Edimax */ \ ++ {USB_DEVICE(0x0789, 0x016D)}, /* LOGITEC - Edimax */ \ ++ /****** 8192CE-VAU ********/ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8186)},/* Intel-Xavi( Azwave) */ ++ ++#define RTL8192D_USB_IDS \ ++ /*=== Realtek demoboard ===*/ \ ++ /****** 8192DU ********/ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8193)},/* 8192DU-VC */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8194)},/* 8192DU-VS */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8111)},/* Realtek 5G dongle for WiFi Display */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0193)},/* 8192DE-VAU */ \ ++ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8171)},/* 8192DU-VC */ \ ++ /*=== Customer ID ===*/ \ ++ /****** 8192DU-VC ********/ \ ++ {USB_DEVICE(0x2019, 0xAB2C)},/* PCI - Abocm */ \ ++ {USB_DEVICE(0x2019, 0x4903)},/* PCI - ETOP */ \ ++ {USB_DEVICE(0x2019, 0x4904)},/* PCI - ETOP */ \ ++ {USB_DEVICE(0x07B8, 0x8193)},/* Abocom - Abocom */ \ ++ /****** 8192DU-VS ********/ \ ++ {USB_DEVICE(0x20F4, 0x664B)}, /* TRENDnet - Cameo */ \ ++ {USB_DEVICE(0x04DD, 0x954F)}, /* Sharp */ \ ++ {USB_DEVICE(0x04DD, 0x96A6)}, /* Sharp */ \ ++ {USB_DEVICE(0x050D, 0x110A)}, /* Belkin - Edimax */ \ ++ {USB_DEVICE(0x050D, 0x1105)}, /* Belkin - Edimax */ \ ++ {USB_DEVICE(0x050D, 0x120A)}, /* Belkin - Edimax */ \ ++ {USB_DEVICE(0x1668, 0x8102)}, /* - */ \ ++ {USB_DEVICE(0x0BDA, 0xE194)}, /* - Edimax */ \ ++ /****** 8192DU-WiFi Display Dongle ********/ \ ++ {USB_DEVICE(0x2019, 0xAB2D)},/* Planex - Abocom ,5G dongle for WiFi Display */ ++ ++#ifndef CONFIG_RTL8192C ++ #undef RTL8192C_USB_IDS ++ #define RTL8192C_USB_IDS ++#endif ++#ifndef CONFIG_RTL8192D ++ #undef RTL8192D_USB_IDS ++ #define RTL8192D_USB_IDS ++#endif ++ ++ ++static struct usb_device_id rtw_usb_id_tbl[] ={ ++ RTL8192C_USB_IDS ++ RTL8192D_USB_IDS ++ {} /* Terminating entry */ ++}; ++MODULE_DEVICE_TABLE(usb, rtw_usb_id_tbl); ++ ++int const rtw_usb_id_len = sizeof(rtw_usb_id_tbl) / sizeof(struct usb_device_id); ++ ++static struct specific_device_id specific_device_id_tbl[] = { ++ {.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x8177, .flags=SPEC_DEV_ID_DISABLE_HT},//8188cu 1*1 dongole, (b/g mode only) ++ {.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x817E, .flags=SPEC_DEV_ID_DISABLE_HT},//8188CE-VAU USB minCard (b/g mode only) ++ {.idVendor=0x0b05, .idProduct=0x1791, .flags=SPEC_DEV_ID_DISABLE_HT}, ++ {.idVendor=0x13D3, .idProduct=0x3311, .flags=SPEC_DEV_ID_DISABLE_HT}, ++ {.idVendor=0x13D3, .idProduct=0x3359, .flags=SPEC_DEV_ID_DISABLE_HT},//Russian customer -Azwave (8188CE-VAU g mode) ++#ifdef RTK_DMP_PLATFORM ++ {.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x8111, .flags=SPEC_DEV_ID_ASSIGN_IFNAME}, // Realtek 5G dongle for WiFi Display ++ {.idVendor=0x2019, .idProduct=0xAB2D, .flags=SPEC_DEV_ID_ASSIGN_IFNAME}, // PCI-Abocom 5G dongle for WiFi Display ++#endif /* RTK_DMP_PLATFORM */ ++ {} ++}; ++ ++struct rtw_usb_drv { ++ struct usb_driver usbdrv; ++ int drv_registered; ++}; ++ ++static void rtw_dev_shutdown(struct device *dev) ++{ ++ struct usb_interface *usb_intf = container_of(dev, struct usb_interface, dev); ++ struct dvobj_priv *dvobj = usb_get_intfdata(usb_intf); ++ _adapter *adapter = dvobj->if1; ++ int i; ++ ++ DBG_871X("%s\n", __func__); ++ ++ for (i = 0; iiface_nums; i++) { ++ adapter = dvobj->padapters[i]; ++ adapter->bSurpriseRemoved = _TRUE; ++ } ++ ++ ATOMIC_SET(&dvobj->continual_urb_error, MAX_CONTINUAL_URB_ERR+1); ++} ++ ++#ifdef CONFIG_RTL8192C ++static struct usb_device_id rtl8192c_usb_id_tbl[] ={ ++ RTL8192C_USB_IDS ++ {} /* Terminating entry */ ++}; ++ ++struct rtw_usb_drv rtl8192c_usb_drv = { ++ .usbdrv.name = (char*)"rtl8192cu", ++ .usbdrv.probe = rtw_drv_init, ++ .usbdrv.disconnect = rtw_dev_remove, ++ .usbdrv.id_table = rtl8192c_usb_id_tbl, ++ .usbdrv.suspend = rtw_suspend, ++ .usbdrv.resume = rtw_resume, ++ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22)) ++ .usbdrv.reset_resume = rtw_resume, ++ #endif ++ #ifdef CONFIG_AUTOSUSPEND ++ .usbdrv.supports_autosuspend = 1, ++ #endif ++ ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)) ++ .usbdrv.drvwrap.driver.shutdown = rtw_dev_shutdown, ++ #else ++ .usbdrv.driver.shutdown = rtw_dev_shutdown, ++ #endif ++}; ++ ++static struct rtw_usb_drv *usb_drv = &rtl8192c_usb_drv; ++#endif /* CONFIG_RTL8192C */ ++ ++#ifdef CONFIG_RTL8192D ++static struct usb_device_id rtl8192d_usb_id_tbl[] ={ ++ RTL8192D_USB_IDS ++ {} /* Terminating entry */ ++}; ++ ++struct rtw_usb_drv rtl8192d_usb_drv = { ++ .usbdrv.name = (char*)"rtl8192du", ++ .usbdrv.probe = rtw_drv_init, ++ .usbdrv.disconnect = rtw_dev_remove, ++ .usbdrv.id_table = rtl8192d_usb_id_tbl, ++ .usbdrv.suspend = rtw_suspend, ++ .usbdrv.resume = rtw_resume, ++ #if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22)) ++ .usbdrv.reset_resume = rtw_resume, ++ #endif ++ #ifdef CONFIG_AUTOSUSPEND ++ .usbdrv.supports_autosuspend = 1, ++ #endif ++ ++ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)) ++ .usbdrv.drvwrap.driver.shutdown = rtw_dev_shutdown, ++ #else ++ .usbdrv.driver.shutdown = rtw_dev_shutdown, ++ #endif ++}; ++static struct rtw_usb_drv *usb_drv = &rtl8192d_usb_drv; ++#endif /* CONFIG_RTL8192D */ ++ ++static inline int RT_usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) ++{ ++ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); ++} ++ ++static inline int RT_usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) ++{ ++ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); ++} ++ ++static inline int RT_usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) ++{ ++ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT); ++} ++ ++static inline int RT_usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) ++{ ++ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK); ++} ++ ++static inline int RT_usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) ++{ ++ return (RT_usb_endpoint_xfer_bulk(epd) && RT_usb_endpoint_dir_in(epd)); ++} ++ ++static inline int RT_usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) ++{ ++ return (RT_usb_endpoint_xfer_bulk(epd) && RT_usb_endpoint_dir_out(epd)); ++} ++ ++static inline int RT_usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) ++{ ++ return (RT_usb_endpoint_xfer_int(epd) && RT_usb_endpoint_dir_in(epd)); ++} ++ ++static inline int RT_usb_endpoint_num(const struct usb_endpoint_descriptor *epd) ++{ ++ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; ++} ++ ++static u8 rtw_init_intf_priv(struct dvobj_priv *dvobj) ++{ ++ u8 rst = _SUCCESS; ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_MUTEX ++ _rtw_mutex_init(&dvobj->usb_vendor_req_mutex); ++ #endif ++ ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC ++ dvobj->usb_alloc_vendor_req_buf = rtw_zmalloc(MAX_USB_IO_CTL_SIZE); ++ if (dvobj->usb_alloc_vendor_req_buf == NULL) { ++ DBG_871X("alloc usb_vendor_req_buf failed... /n"); ++ rst = _FAIL; ++ goto exit; ++ } ++ dvobj->usb_vendor_req_buf = ++ (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(dvobj->usb_alloc_vendor_req_buf ), ALIGNMENT_UNIT); ++exit: ++ #endif ++ ++ return rst; ++ ++} ++ ++static u8 rtw_deinit_intf_priv(struct dvobj_priv *dvobj) ++{ ++ u8 rst = _SUCCESS; ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC ++ if(dvobj->usb_vendor_req_buf) ++ rtw_mfree(dvobj->usb_alloc_vendor_req_buf, MAX_USB_IO_CTL_SIZE); ++ #endif ++ ++ #ifdef CONFIG_USB_VENDOR_REQ_MUTEX ++ _rtw_mutex_free(&dvobj->usb_vendor_req_mutex); ++ #endif ++ ++ return rst; ++} ++ ++static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf) ++{ ++ int i; ++ u8 val8; ++ int status = _FAIL; ++ struct dvobj_priv *pdvobjpriv = NULL; ++ struct usb_device *pusbd; ++ struct usb_device_descriptor *pdev_desc; ++ struct usb_host_config *phost_conf; ++ struct usb_config_descriptor *pconf_desc; ++ struct usb_host_interface *phost_iface; ++ struct usb_interface_descriptor *piface_desc; ++ struct usb_host_endpoint *phost_endp; ++ struct usb_endpoint_descriptor *pendp_desc; ++ ++_func_enter_; ++ ++ if((pdvobjpriv = devobj_init()) == NULL) { ++ goto exit; ++ } ++ ++ pdvobjpriv->pusbintf = usb_intf ; ++ pusbd = pdvobjpriv->pusbdev = interface_to_usbdev(usb_intf); ++ usb_set_intfdata(usb_intf, pdvobjpriv); ++ ++ pdvobjpriv->RtNumInPipes = 0; ++ pdvobjpriv->RtNumOutPipes = 0; ++ ++ ++ pdev_desc = &pusbd->descriptor; ++#if 0 ++ DBG_871X("\n8712_usb_device_descriptor:\n"); ++ DBG_871X("bLength=%x\n", pdev_desc->bLength); ++ DBG_871X("bDescriptorType=%x\n", pdev_desc->bDescriptorType); ++ DBG_871X("bcdUSB=%x\n", pdev_desc->bcdUSB); ++ DBG_871X("bDeviceClass=%x\n", pdev_desc->bDeviceClass); ++ DBG_871X("bDeviceSubClass=%x\n", pdev_desc->bDeviceSubClass); ++ DBG_871X("bDeviceProtocol=%x\n", pdev_desc->bDeviceProtocol); ++ DBG_871X("bMaxPacketSize0=%x\n", pdev_desc->bMaxPacketSize0); ++ DBG_871X("idVendor=%x\n", pdev_desc->idVendor); ++ DBG_871X("idProduct=%x\n", pdev_desc->idProduct); ++ DBG_871X("bcdDevice=%x\n", pdev_desc->bcdDevice); ++ DBG_871X("iManufacturer=%x\n", pdev_desc->iManufacturer); ++ DBG_871X("iProduct=%x\n", pdev_desc->iProduct); ++ DBG_871X("iSerialNumber=%x\n", pdev_desc->iSerialNumber); ++ DBG_871X("bNumConfigurations=%x\n", pdev_desc->bNumConfigurations); ++#endif ++ ++ phost_conf = pusbd->actconfig; ++ pconf_desc = &phost_conf->desc; ++ ++#if 0 ++ DBG_871X("\n8712_usb_configuration_descriptor:\n"); ++ DBG_871X("bLength=%x\n", pconf_desc->bLength); ++ DBG_871X("bDescriptorType=%x\n", pconf_desc->bDescriptorType); ++ DBG_871X("wTotalLength=%x\n", pconf_desc->wTotalLength); ++ DBG_871X("bNumInterfaces=%x\n", pconf_desc->bNumInterfaces); ++ DBG_871X("bConfigurationValue=%x\n", pconf_desc->bConfigurationValue); ++ DBG_871X("iConfiguration=%x\n", pconf_desc->iConfiguration); ++ DBG_871X("bmAttributes=%x\n", pconf_desc->bmAttributes); ++ DBG_871X("bMaxPower=%x\n", pconf_desc->bMaxPower); ++#endif ++ ++ //DBG_871X("\n/****** num of altsetting = (%d) ******/\n", usb_intf->num_altsetting); ++ ++ phost_iface = &usb_intf->altsetting[0]; ++ piface_desc = &phost_iface->desc; ++ ++#if 0 ++ DBG_871X("\n8712_usb_interface_descriptor:\n"); ++ DBG_871X("bLength=%x\n", piface_desc->bLength); ++ DBG_871X("bDescriptorType=%x\n", piface_desc->bDescriptorType); ++ DBG_871X("bInterfaceNumber=%x\n", piface_desc->bInterfaceNumber); ++ DBG_871X("bAlternateSetting=%x\n", piface_desc->bAlternateSetting); ++ DBG_871X("bNumEndpoints=%x\n", piface_desc->bNumEndpoints); ++ DBG_871X("bInterfaceClass=%x\n", piface_desc->bInterfaceClass); ++ DBG_871X("bInterfaceSubClass=%x\n", piface_desc->bInterfaceSubClass); ++ DBG_871X("bInterfaceProtocol=%x\n", piface_desc->bInterfaceProtocol); ++ DBG_871X("iInterface=%x\n", piface_desc->iInterface); ++#endif ++ ++ pdvobjpriv->NumInterfaces = pconf_desc->bNumInterfaces; ++ pdvobjpriv->InterfaceNumber = piface_desc->bInterfaceNumber; ++ pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints; ++ ++ //DBG_871X("\ndump usb_endpoint_descriptor:\n"); ++ ++ for (i = 0; i < pdvobjpriv->nr_endpoint; i++) ++ { ++ phost_endp = phost_iface->endpoint + i; ++ if (phost_endp) ++ { ++ pendp_desc = &phost_endp->desc; ++ ++ DBG_871X("\nusb_endpoint_descriptor(%d):\n", i); ++ DBG_871X("bLength=%x\n",pendp_desc->bLength); ++ DBG_871X("bDescriptorType=%x\n",pendp_desc->bDescriptorType); ++ DBG_871X("bEndpointAddress=%x\n",pendp_desc->bEndpointAddress); ++ //DBG_871X("bmAttributes=%x\n",pendp_desc->bmAttributes); ++ //DBG_871X("wMaxPacketSize=%x\n",pendp_desc->wMaxPacketSize); ++ DBG_871X("wMaxPacketSize=%x\n",le16_to_cpu(pendp_desc->wMaxPacketSize)); ++ DBG_871X("bInterval=%x\n",pendp_desc->bInterval); ++ //DBG_871X("bRefresh=%x\n",pendp_desc->bRefresh); ++ //DBG_871X("bSynchAddress=%x\n",pendp_desc->bSynchAddress); ++ ++ if (RT_usb_endpoint_is_bulk_in(pendp_desc)) ++ { ++ DBG_871X("RT_usb_endpoint_is_bulk_in = %x\n", RT_usb_endpoint_num(pendp_desc)); ++ pdvobjpriv->RtNumInPipes++; ++ } ++ else if (RT_usb_endpoint_is_int_in(pendp_desc)) ++ { ++ DBG_871X("RT_usb_endpoint_is_int_in = %x, Interval = %x\n", RT_usb_endpoint_num(pendp_desc),pendp_desc->bInterval); ++ pdvobjpriv->RtNumInPipes++; ++ } ++ else if (RT_usb_endpoint_is_bulk_out(pendp_desc)) ++ { ++ DBG_871X("RT_usb_endpoint_is_bulk_out = %x\n", RT_usb_endpoint_num(pendp_desc)); ++ pdvobjpriv->RtNumOutPipes++; ++ } ++ pdvobjpriv->ep_num[i] = RT_usb_endpoint_num(pendp_desc); ++ } ++ } ++ ++ DBG_871X("nr_endpoint=%d, in_num=%d, out_num=%d\n\n", pdvobjpriv->nr_endpoint, pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes); ++ ++ if (pusbd->speed == USB_SPEED_HIGH) { ++ pdvobjpriv->ishighspeed = _TRUE; ++ DBG_871X("USB_SPEED_HIGH\n"); ++ } else { ++ pdvobjpriv->ishighspeed = _FALSE; ++ DBG_871X("NON USB_SPEED_HIGH\n"); ++ } ++ ++ if (rtw_init_intf_priv(pdvobjpriv) == _FAIL) { ++ RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't INIT rtw_init_intf_priv\n")); ++ goto free_dvobj; ++ } ++ ++ //.3 misc ++ _rtw_init_sema(&(pdvobjpriv->usb_suspend_sema), 0); ++ ++ rtw_reset_continual_urb_error(pdvobjpriv); ++ ++ usb_get_dev(pusbd); ++ ++ //DBG_871X("%s %d\n", __func__, ATOMIC_READ(&usb_intf->dev.kobj.kref.refcount)); ++ ++ status = _SUCCESS; ++ ++free_dvobj: ++ if (status != _SUCCESS && pdvobjpriv) { ++ usb_set_intfdata(usb_intf, NULL); ++ devobj_deinit(pdvobjpriv); ++ pdvobjpriv = NULL; ++ } ++exit: ++_func_exit_; ++ return pdvobjpriv; ++} ++ ++static void usb_dvobj_deinit(struct usb_interface *usb_intf) ++{ ++ struct dvobj_priv *dvobj = usb_get_intfdata(usb_intf); ++ ++_func_enter_; ++ ++ usb_set_intfdata(usb_intf, NULL); ++ if (dvobj) { ++ //Modify condition for 92DU DMDP 2010.11.18, by Thomas ++ /*if ((dvobj->NumInterfaces == 1) ++ || ((dvobj->InterfaceNumber == 1) && (dvobj->DualMacMode == _TRUE))) { ++ if (interface_to_usbdev(usb_intf)->state != USB_STATE_NOTATTACHED) { ++ //If we didn't unplug usb dongle and remove/insert modlue, driver fails on sitesurvey for the first time when device is up . ++ //Reset usb port for sitesurvey fail issue. 2009.8.13, by Thomas ++ DBG_871X("usb attached..., try to reset usb device\n"); ++ usb_reset_device(interface_to_usbdev(usb_intf)); ++ } ++ }*/ ++ rtw_deinit_intf_priv(dvobj); ++ devobj_deinit(dvobj); ++ } ++ ++ //DBG_871X("%s %d\n", __func__, ATOMIC_READ(&usb_intf->dev.kobj.kref.refcount)); ++ usb_put_dev(interface_to_usbdev(usb_intf)); ++ ++_func_exit_; ++} ++ ++static void decide_chip_type_by_usb_device_id(_adapter *padapter, const struct usb_device_id *pdid) ++{ ++ padapter->chip_type = NULL_CHIP_TYPE; ++#ifdef CONFIG_RTL8192C ++ padapter->chip_type = RTL8188C_8192C; ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192CU; ++ DBG_871X("CHIP TYPE: RTL8188C_8192C\n"); ++#endif ++ ++#ifdef CONFIG_RTL8192D ++ padapter->chip_type = RTL8192D; ++ padapter->HardwareType = HARDWARE_TYPE_RTL8192DU; ++ DBG_871X("CHIP TYPE: RTL8192D\n"); ++#endif ++} ++ ++static void usb_intf_start(_adapter *padapter) ++{ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+usb_intf_start\n")); ++ rtw_hal_inirp_init(padapter); ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-usb_intf_start\n")); ++} ++ ++static void usb_intf_stop(_adapter *padapter) ++{ ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+usb_intf_stop\n")); ++ ++ //disabel_hw_interrupt ++ if(padapter->bSurpriseRemoved == _FALSE) ++ { ++ //device still exists, so driver can do i/o operation ++ //TODO: ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("SurpriseRemoved==_FALSE\n")); ++ } ++ ++ //cancel in irp ++ rtw_hal_inirp_deinit(padapter); ++ ++ //cancel out irp ++ rtw_write_port_cancel(padapter); ++ ++ //todo:cancel other irps ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-usb_intf_stop\n")); ++ ++} ++ ++static void rtw_dev_unload(_adapter *padapter) ++{ ++ struct net_device *pnetdev= (struct net_device*)padapter->pnetdev; ++ u8 val8; ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_dev_unload\n")); ++ ++ if(padapter->bup == _TRUE) ++ { ++ DBG_871X("===> rtw_dev_unload\n"); ++ ++ padapter->bDriverStopped = _TRUE; ++ #ifdef CONFIG_XMIT_ACK ++ if (padapter->xmitpriv.ack_tx) ++ rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP); ++ #endif ++ ++ //s3. ++ if(padapter->intf_stop) ++ { ++ padapter->intf_stop(padapter); ++ } ++ ++ //s4. ++ if(!padapter->pwrctrlpriv.bInternalAutoSuspend ) ++ rtw_stop_drv_threads(padapter); ++ ++ ++ //s5. ++ if(padapter->bSurpriseRemoved == _FALSE) ++ { ++ //DBG_871X("r871x_dev_unload()->rtl871x_hal_deinit()\n"); ++#ifdef CONFIG_WOWLAN ++ if((padapter->pwrctrlpriv.bSupportRemoteWakeup==_TRUE)&&(padapter->pwrctrlpriv.wowlan_mode==_TRUE)){ ++ DBG_871X("%s bSupportWakeOnWlan==_TRUE do not run rtw_hal_deinit()\n",__FUNCTION__); ++ } ++ else ++#endif //CONFIG_WOWLAN ++ { ++ rtw_hal_deinit(padapter); ++ } ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ ++ padapter->bup = _FALSE; ++#ifdef CONFIG_WOWLAN ++ padapter->hw_init_completed=_FALSE; ++#endif //CONFIG_WOWLAN ++ } ++ else ++ { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("r871x_dev_unload():padapter->bup == _FALSE\n" )); ++ } ++ ++ DBG_871X("<=== rtw_dev_unload\n"); ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-rtw_dev_unload\n")); ++ ++} ++ ++static void process_spec_devid(const struct usb_device_id *pdid) ++{ ++ u16 vid, pid; ++ u32 flags; ++ int i; ++ int num = sizeof(specific_device_id_tbl)/sizeof(struct specific_device_id); ++ ++ for(i=0; iidVendor==vid) && (pdid->idProduct==pid) && (flags&SPEC_DEV_ID_DISABLE_HT)) ++ { ++ rtw_ht_enable = 0; ++ rtw_cbw40_enable = 0; ++ rtw_ampdu_enable = 0; ++ } ++#endif ++ ++#ifdef RTK_DMP_PLATFORM ++ // Change the ifname to wlan10 when PC side WFD dongle plugin on DMP platform. ++ // It is used to distinguish between normal and PC-side wifi dongle/module. ++ if((pdid->idVendor==vid) && (pdid->idProduct==pid) && (flags&SPEC_DEV_ID_ASSIGN_IFNAME)) ++ { ++ extern char* ifname; ++ strncpy(ifname, "wlan10", 6); ++ //DBG_871X("%s()-%d: ifname=%s, vid=%04X, pid=%04X\n", __FUNCTION__, __LINE__, ifname, vid, pid); ++ } ++#endif /* RTK_DMP_PLATFORM */ ++ ++ } ++} ++ ++#ifdef SUPPORT_HW_RFOFF_DETECTED ++int rtw_hw_suspend(_adapter *padapter ) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct usb_interface *pusb_intf = adapter_to_dvobj(padapter)->pusbintf; ++ struct net_device *pnetdev = padapter->pnetdev; ++ ++ _func_enter_; ++ ++ if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved)) ++ { ++ DBG_871X("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n", ++ padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved); ++ goto error_exit; ++ } ++ ++ if(padapter)//system suspend ++ { ++ LeaveAllPowerSaveMode(padapter); ++ ++ DBG_871X("==> rtw_hw_suspend\n"); ++ _enter_pwrlock(&pwrpriv->lock); ++ pwrpriv->bips_processing = _TRUE; ++ //padapter->net_closed = _TRUE; ++ //s1. ++ if(pnetdev) ++ { ++ netif_carrier_off(pnetdev); ++ rtw_netif_stop_queue(pnetdev); ++ } ++ ++ //s2. ++ rtw_disassoc_cmd(padapter, 500, _FALSE); ++ ++ //s2-2. indicate disconnect to os ++ //rtw_indicate_disconnect(padapter); ++ { ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED)) ++ { ++ _clr_fwstate_(pmlmepriv, _FW_LINKED); ++ ++ rtw_led_control(padapter, LED_CTL_NO_LINK); ++ ++ rtw_os_indicate_disconnect(padapter); ++ ++ #ifdef CONFIG_LPS ++ //donnot enqueue cmd ++ rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_DISCONNECT, 0); ++ #endif ++ } ++ ++ } ++ //s2-3. ++ rtw_free_assoc_resources(padapter, 1); ++ ++ //s2-4. ++ rtw_free_network_queue(padapter,_TRUE); ++ #ifdef CONFIG_IPS ++ rtw_ips_dev_unload(padapter); ++ #endif ++ pwrpriv->rf_pwrstate = rf_off; ++ pwrpriv->bips_processing = _FALSE; ++ ++ _exit_pwrlock(&pwrpriv->lock); ++ } ++ else ++ goto error_exit; ++ ++ _func_exit_; ++ return 0; ++ ++error_exit: ++ DBG_871X("%s, failed \n",__FUNCTION__); ++ return (-1); ++ ++} ++ ++int rtw_hw_resume(_adapter *padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct usb_interface *pusb_intf = adapter_to_dvobj(padapter)->pusbintf; ++ struct net_device *pnetdev = padapter->pnetdev; ++ ++ _func_enter_; ++ ++ if(padapter)//system resume ++ { ++ DBG_871X("==> rtw_hw_resume\n"); ++ _enter_pwrlock(&pwrpriv->lock); ++ pwrpriv->bips_processing = _TRUE; ++ rtw_reset_drv_sw(padapter); ++ ++ if(pm_netdev_open(pnetdev,_FALSE) != 0) ++ { ++ _exit_pwrlock(&pwrpriv->lock); ++ goto error_exit; ++ } ++ ++ netif_device_attach(pnetdev); ++ netif_carrier_on(pnetdev); ++ ++ if(!rtw_netif_queue_stopped(pnetdev)) ++ rtw_netif_start_queue(pnetdev); ++ else ++ rtw_netif_wake_queue(pnetdev); ++ ++ pwrpriv->bkeepfwalive = _FALSE; ++ pwrpriv->brfoffbyhw = _FALSE; ++ ++ pwrpriv->rf_pwrstate = rf_on; ++ pwrpriv->bips_processing = _FALSE; ++ ++ _exit_pwrlock(&pwrpriv->lock); ++ } ++ else ++ { ++ goto error_exit; ++ } ++ ++ _func_exit_; ++ ++ return 0; ++error_exit: ++ DBG_871X("%s, Open net dev failed \n",__FUNCTION__); ++ return (-1); ++} ++#endif ++ ++static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message) ++{ ++ struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf); ++ _adapter *padapter = dvobj->if1; ++ struct net_device *pnetdev = padapter->pnetdev; ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct usb_device *usb_dev = interface_to_usbdev(pusb_intf); ++#ifdef CONFIG_WOWLAN ++ struct wowlan_ioctl_param poidparam; ++#endif // CONFIG_WOWLAN ++ int ret = 0; ++ u32 start_time = rtw_get_current_time(); ++ _func_enter_; ++ ++ DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid); ++ ++ if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved)) ++ { ++ DBG_871X("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n", ++ padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved); ++ goto exit; ++ } ++ ++ if(pwrpriv->bInternalAutoSuspend ) ++ { ++ #ifdef CONFIG_AUTOSUSPEND ++ #ifdef SUPPORT_HW_RFOFF_DETECTED ++ // The FW command register update must after MAC and FW init ready. ++ if((padapter->bFWReady) && ( padapter->pwrctrlpriv.bHWPwrPindetect ) && (padapter->registrypriv.usbss_enable )) ++ { ++ u8 bOpen = _TRUE; ++ rtw_interface_ps_func(padapter,HAL_USB_SELECT_SUSPEND,&bOpen); ++ //rtl8192c_set_FwSelectSuspend_cmd(padapter,_TRUE ,500);//note fw to support hw power down ping detect ++ } ++ #endif ++ #endif ++ } ++ pwrpriv->bInSuspend = _TRUE; ++ rtw_cancel_all_timer(padapter); ++ LeaveAllPowerSaveMode(padapter); ++ ++ rtw_stop_cmd_thread(padapter); ++ ++ _enter_pwrlock(&pwrpriv->lock); ++ //padapter->net_closed = _TRUE; ++ //s1. ++ if(pnetdev) ++ { ++ netif_carrier_off(pnetdev); ++ rtw_netif_stop_queue(pnetdev); ++ } ++#ifdef CONFIG_WOWLAN ++ if(padapter->pwrctrlpriv.bSupportRemoteWakeup==_TRUE&&padapter->pwrctrlpriv.wowlan_mode==_TRUE){ ++ u8 ps_mode=PS_MODE_MIN; ++ //set H2C command ++ poidparam.subcode=WOWLAN_ENABLE; ++ rtw_hal_set_hwreg(padapter,HW_VAR_WOWLAN,(u8 *)&poidparam); ++ //rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, &ps_mode); ++ //rtw_set_rpwm(padapter, PS_STATE_S2); ++ } ++ else ++#endif //CONFIG_WOWLAN ++ { ++ //s2. ++ rtw_disassoc_cmd(padapter, 0, _FALSE); ++ } ++ ++#ifdef CONFIG_LAYER2_ROAMING_RESUME ++ if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) ) ++ { ++ //printk("%s:%d assoc_ssid:%s\n", __FUNCTION__, __LINE__, pmlmepriv->assoc_ssid.Ssid); ++ DBG_871X("%s:%d %s(" MAC_FMT "), length:%d assoc_ssid.length:%d\n",__FUNCTION__, __LINE__, ++ pmlmepriv->cur_network.network.Ssid.Ssid, ++ MAC_ARG(pmlmepriv->cur_network.network.MacAddress), ++ pmlmepriv->cur_network.network.Ssid.SsidLength, ++ pmlmepriv->assoc_ssid.SsidLength); ++ rtw_set_roaming(padapter, 1); ++ } ++#endif ++ //s2-2. indicate disconnect to os ++ rtw_indicate_disconnect(padapter); ++ //s2-3. ++ rtw_free_assoc_resources(padapter, 1); ++#ifdef CONFIG_AUTOSUSPEND ++ if(!pwrpriv->bInternalAutoSuspend ) ++#endif ++ //s2-4. ++ rtw_free_network_queue(padapter, _TRUE); ++ ++ rtw_dev_unload(padapter); ++#ifdef CONFIG_AUTOSUSPEND ++ pwrpriv->rf_pwrstate = rf_off; ++ pwrpriv->bips_processing = _FALSE; ++#endif ++ _exit_pwrlock(&pwrpriv->lock); ++ ++ if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) ++ rtw_indicate_scan_done(padapter, 1); ++ ++ if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) ++ rtw_indicate_disconnect(padapter); ++ ++exit: ++ DBG_871X("<=== %s return %d.............. in %dms\n", __FUNCTION__ ++ , ret, rtw_get_passing_time_ms(start_time)); ++ ++ _func_exit_; ++ return ret; ++} ++ ++static int rtw_resume(struct usb_interface *pusb_intf) ++{ ++ struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf); ++ _adapter *padapter = dvobj->if1; ++ struct net_device *pnetdev = padapter->pnetdev; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ int ret = 0; ++ ++ if(pwrpriv->bInternalAutoSuspend ){ ++ ret = rtw_resume_process(padapter); ++ } else { ++#ifdef CONFIG_RESUME_IN_WORKQUEUE ++ rtw_resume_in_workqueue(pwrpriv); ++#else ++ if (rtw_is_earlysuspend_registered(pwrpriv) ++ #ifdef CONFIG_WOWLAN ++ && !padapter->pwrctrlpriv.wowlan_mode ++ #endif /* CONFIG_WOWLAN */ ++ ) { ++ /* jeff: bypass resume here, do in late_resume */ ++ rtw_set_do_late_resume(pwrpriv, _TRUE); ++ } else { ++ ret = rtw_resume_process(padapter); ++ } ++#endif /* CONFIG_RESUME_IN_WORKQUEUE */ ++ } ++ ++ return ret; ++ ++} ++ ++int rtw_resume_process(_adapter *padapter) ++{ ++ struct net_device *pnetdev; ++ struct pwrctrl_priv *pwrpriv; ++ int ret = -1; ++ u32 start_time = rtw_get_current_time(); ++ _func_enter_; ++ ++ DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid); ++ ++ if(padapter) { ++ pnetdev= padapter->pnetdev; ++ pwrpriv = &padapter->pwrctrlpriv; ++ } else { ++ goto exit; ++ } ++ ++ _enter_pwrlock(&pwrpriv->lock); ++ rtw_reset_drv_sw(padapter); ++ pwrpriv->bkeepfwalive = _FALSE; ++ ++ DBG_871X("bkeepfwalive(%x)\n",pwrpriv->bkeepfwalive); ++ if(pm_netdev_open(pnetdev,_TRUE) != 0) { ++ _exit_pwrlock(&pwrpriv->lock); ++ goto exit; ++ } ++ ++ netif_device_attach(pnetdev); ++ netif_carrier_on(pnetdev); ++ ++#ifdef CONFIG_AUTOSUSPEND ++ if(pwrpriv->bInternalAutoSuspend ) ++ { ++ #ifdef CONFIG_AUTOSUSPEND ++ #ifdef SUPPORT_HW_RFOFF_DETECTED ++ // The FW command register update must after MAC and FW init ready. ++ if((padapter->bFWReady) && ( padapter->pwrctrlpriv.bHWPwrPindetect ) && (padapter->registrypriv.usbss_enable )) ++ { ++ //rtl8192c_set_FwSelectSuspend_cmd(padapter,_FALSE ,500);//note fw to support hw power down ping detect ++ u8 bOpen = _FALSE; ++ rtw_interface_ps_func(padapter,HAL_USB_SELECT_SUSPEND,&bOpen); ++ } ++ #endif ++ #endif ++ ++ pwrpriv->bInternalAutoSuspend = _FALSE; ++ pwrpriv->brfoffbyhw = _FALSE; ++ } ++#endif ++ _exit_pwrlock(&pwrpriv->lock); ++ ++ if( padapter->pid[1]!=0) { ++ DBG_871X("pid[1]:%d\n",padapter->pid[1]); ++ rtw_signal_process(padapter->pid[1], SIGUSR2); ++ } ++ ++ #ifdef CONFIG_LAYER2_ROAMING_RESUME ++ rtw_roaming(padapter, NULL); ++ #endif ++ ++ ret = 0; ++exit: ++ #ifdef CONFIG_RESUME_IN_WORKQUEUE ++ rtw_unlock_suspend(); ++ #endif //CONFIG_RESUME_IN_WORKQUEUE ++ ++ pwrpriv->bInSuspend = _FALSE; ++ DBG_871X("<=== %s return %d.............. in %dms\n", __FUNCTION__ ++ , ret, rtw_get_passing_time_ms(start_time)); ++ ++ _func_exit_; ++ ++ return ret; ++} ++ ++#ifdef CONFIG_AUTOSUSPEND ++void autosuspend_enter(_adapter* padapter) ++{ ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct dvobj_priv *dvobj = adapter_to_dvobj(padapter); ++ ++ pwrpriv->bInternalAutoSuspend = _TRUE; ++ pwrpriv->bips_processing = _TRUE; ++ ++ DBG_871X("==>autosuspend_enter...........\n"); ++ ++ if(rf_off == pwrpriv->change_rfpwrstate ) ++ { ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ usb_enable_autosuspend(dvobj->pusbdev); ++ #else ++ dvobj->pusbdev->autosuspend_disabled = 0;//autosuspend disabled by the user ++ #endif ++ ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,33)) ++ usb_autopm_put_interface(dvobj->pusbintf); ++ #elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,20)) ++ usb_autopm_enable(dvobj->pusbintf); ++ #else ++ usb_autosuspend_device(dvobj->pusbdev, 1); ++ #endif ++ } ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32)) ++ DBG_871X("...pm_usage_cnt(%d).....\n", atomic_read(&(dvobj->pusbintf->pm_usage_cnt))); ++ #else ++ DBG_871X("...pm_usage_cnt(%d).....\n", dvobj->pusbintf->pm_usage_cnt); ++ #endif ++ ++} ++int autoresume_enter(_adapter* padapter) ++{ ++ int result = _SUCCESS; ++ struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv; ++ struct security_priv* psecuritypriv=&(padapter->securitypriv); ++ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; ++ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); ++ struct dvobj_priv *dvobj = adapter_to_dvobj(padapter); ++ ++ ++ DBG_871X("====> autoresume_enter \n"); ++ ++ if(rf_off == pwrpriv->rf_pwrstate ) ++ { ++ pwrpriv->ps_flag = _FALSE; ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,33)) ++ if (usb_autopm_get_interface(dvobj->pusbintf) < 0) ++ { ++ DBG_871X( "can't get autopm: %d\n", result); ++ result = _FAIL; ++ goto error_exit; ++ } ++ #elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,20)) ++ usb_autopm_disable(dvobj->pusbintf); ++ #else ++ usb_autoresume_device(dvobj->pusbdev, 1); ++ #endif ++ ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32)) ++ DBG_871X("...pm_usage_cnt(%d).....\n", atomic_read(&(dvobj->pusbintf->pm_usage_cnt))); ++ #else ++ DBG_871X("...pm_usage_cnt(%d).....\n", dvobj->pusbintf->pm_usage_cnt); ++ #endif ++ } ++ DBG_871X("<==== autoresume_enter \n"); ++error_exit: ++ ++ return result; ++} ++#endif ++ ++#ifdef CONFIG_PLATFORM_RTD2880B ++extern void rtd2885_wlan_netlink_sendMsg(char *action_string, char *name); ++#endif ++ ++#ifdef CONFIG_PLATFORM_ARM_SUNxI ++#include ++extern int sw_usb_disable_hcd(__u32 usbc_no); ++extern int sw_usb_enable_hcd(__u32 usbc_no); ++static int usb_wifi_host = 2; ++#endif ++ ++#ifdef CONFIG_PLATFORM_ARM_SUN6I ++#include ++extern int sw_usb_disable_hcd(__u32 usbc_no); ++extern int sw_usb_enable_hcd(__u32 usbc_no); ++extern void wifi_pm_power(int on); ++static script_item_u item; ++#endif ++ ++_adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj, ++ struct usb_interface *pusb_intf, const struct usb_device_id *pdid) ++{ ++ _adapter *padapter = NULL; ++ struct net_device *pnetdev = NULL; ++ int status = _FAIL; ++ ++ if ((padapter = (_adapter *)rtw_zvmalloc(sizeof(*padapter))) == NULL) { ++ goto exit; ++ } ++ padapter->dvobj = dvobj; ++ dvobj->if1 = padapter; ++ ++ padapter->bDriverStopped=_TRUE; ++ ++ dvobj->padapters[dvobj->iface_nums++] = padapter; ++ padapter->iface_id = IFACE_ID0; ++ ++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT) ++ //set adapter_type/iface type for primary padapter ++ padapter->isprimary = _TRUE; ++ padapter->adapter_type = PRIMARY_ADAPTER; ++ #ifndef CONFIG_HWPORT_SWAP ++ padapter->iface_type = IFACE_PORT0; ++ #else ++ padapter->iface_type = IFACE_PORT1; ++ #endif ++#endif ++ ++ #ifndef RTW_DVOBJ_CHIP_HW_TYPE ++ //step 1-1., decide the chip_type via vid/pid ++ padapter->interface_type = RTW_USB; ++ decide_chip_type_by_usb_device_id(padapter, pdid); ++ #endif ++ ++ if((pnetdev = rtw_init_netdev(padapter)) == NULL) { ++ goto free_adapter; ++ } ++ SET_NETDEV_DEV(pnetdev, dvobj_to_dev(dvobj)); ++ padapter = rtw_netdev_priv(pnetdev); ++ ++ //step 2. hook HalFunc, allocate HalData ++ if(padapter->chip_type == RTL8188C_8192C) { ++ #ifdef CONFIG_RTL8192C ++ rtl8192cu_set_hal_ops(padapter); ++ #endif ++ } else if(padapter->chip_type == RTL8192D) { ++ #ifdef CONFIG_RTL8192D ++ rtl8192du_set_hal_ops(padapter); ++ #endif ++ } else { ++ DBG_871X("Detect NULL_CHIP_TYPE\n"); ++ goto free_hal_data; ++ } ++ ++ //step 3. ++ padapter->intf_start=&usb_intf_start; ++ padapter->intf_stop=&usb_intf_stop; ++ ++ //.2 ++ if ((rtw_init_io_priv(padapter, usb_set_intf_ops)) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n")); ++ goto free_hal_data; ++ } ++ ++ rtw_hal_read_chip_version(padapter); ++ ++ //.4 usb endpoint mapping ++ rtw_hal_chip_configure(padapter); ++ ++ //step 4. read efuse/eeprom data and get mac_addr ++ rtw_hal_read_chip_info(padapter); ++ ++ if (rtw_handle_dualmac(padapter, 1) != _SUCCESS) ++ goto free_hal_data; ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if(rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj)) != 0) { ++ goto handle_dualmac; ++ } ++#endif ++ ++ //step 5. ++ if (rtw_init_drv_sw(padapter) == _FAIL) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n")); ++ goto free_wdev; ++ } ++ ++#ifdef CONFIG_PM ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18)) ++ if(padapter->pwrctrlpriv.bSupportRemoteWakeup) ++ { ++ dvobj->pusbdev->do_remote_wakeup=1; ++ pusb_intf->needs_remote_wakeup = 1; ++ device_init_wakeup(&pusb_intf->dev, 1); ++ DBG_871X("\n padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~\n"); ++ DBG_871X("\n padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[%d]~~~\n",device_may_wakeup(&pusb_intf->dev)); ++ } ++#endif ++#endif ++ ++#ifdef CONFIG_AUTOSUSPEND ++ if( padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE ) ++ { ++ if(padapter->registrypriv.usbss_enable ){ /* autosuspend (2s delay) */ ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,38)) ++ dvobj->pusbdev->dev.power.autosuspend_delay = 0 * HZ;//15 * HZ; idle-delay time ++ #else ++ dvobj->pusbdev->autosuspend_delay = 0 * HZ;//15 * HZ; idle-delay time ++ #endif ++ ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ usb_enable_autosuspend(dvobj->pusbdev); ++ #elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34)) ++ padapter->bDisableAutosuspend = dvobj->pusbdev->autosuspend_disabled ; ++ dvobj->pusbdev->autosuspend_disabled = 0;//autosuspend disabled by the user ++ #endif ++ ++ usb_autopm_get_interface(dvobj->pusbintf );//init pm_usage_cnt ,let it start from 1 ++ ++ #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32)) ++ DBG_871X("%s...pm_usage_cnt(%d).....\n",__FUNCTION__, atomic_read(&(dvobj->pusbintf ->pm_usage_cnt))); ++ #else ++ DBG_871X("%s...pm_usage_cnt(%d).....\n",__FUNCTION__, dvobj->pusbintf ->pm_usage_cnt); ++ #endif ++ } ++ } ++#endif ++ ++ // set mac addr ++ rtw_macaddr_cfg(padapter->eeprompriv.mac_addr); ++ rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr); ++ ++ DBG_871X("bDriverStopped:%d, bSurpriseRemoved:%d, bup:%d, hw_init_completed:%d\n" ++ ,padapter->bDriverStopped ++ ,padapter->bSurpriseRemoved ++ ,padapter->bup ++ ,padapter->hw_init_completed ++ ); ++ ++ status = _SUCCESS; ++ ++free_wdev: ++ if(status != _SUCCESS) { ++ #ifdef CONFIG_IOCTL_CFG80211 ++ rtw_wdev_unregister(padapter->rtw_wdev); ++ rtw_wdev_free(padapter->rtw_wdev); ++ #endif ++ } ++handle_dualmac: ++ if (status != _SUCCESS) ++ rtw_handle_dualmac(padapter, 0); ++free_hal_data: ++ if(status != _SUCCESS && padapter->HalData) ++ rtw_mfree(padapter->HalData, sizeof(*(padapter->HalData))); ++free_adapter: ++ if (status != _SUCCESS) { ++ if (pnetdev) ++ rtw_free_netdev(pnetdev); ++ else if (padapter) ++ rtw_vmfree((u8*)padapter, sizeof(*padapter)); ++ padapter = NULL; ++ } ++exit: ++ return padapter; ++} ++ ++static void rtw_usb_if1_deinit(_adapter *if1) ++{ ++ struct net_device *pnetdev = if1->pnetdev; ++ struct mlme_priv *pmlmepriv= &if1->mlmepriv; ++ ++ if(check_fwstate(pmlmepriv, _FW_LINKED)) ++ rtw_disassoc_cmd(if1, 0, _FALSE); ++ ++#ifdef CONFIG_AP_MODE ++ free_mlme_ap_info(if1); ++ #ifdef CONFIG_HOSTAPD_MLME ++ hostapd_mode_unload(if1); ++ #endif ++#endif ++ ++ rtw_cancel_all_timer(if1); ++#ifdef CONFIG_WOWLAN ++ if1->pwrctrlpriv.wowlan_mode=_FALSE; ++#endif //CONFIG_WOWLAN ++ rtw_dev_unload(if1); ++ ++ DBG_871X("%s, hw_init_completed=%d\n", __func__, if1->hw_init_completed); ++ ++ //s6. ++ rtw_handle_dualmac(if1, 0); ++ ++#ifdef CONFIG_IOCTL_CFG80211 ++ if (if1->rtw_wdev) ++ rtw_wdev_free(if1->rtw_wdev); ++#endif //CONFIG_IOCTL_CFG80211 ++ ++ rtw_free_drv_sw(if1); ++ ++ if(pnetdev) ++ rtw_free_netdev(pnetdev); ++ ++#ifdef CONFIG_PLATFORM_RTD2880B ++ DBG_871X("wlan link down\n"); ++ rtd2885_wlan_netlink_sendMsg("linkdown", "8712"); ++#endif ++ ++} ++ ++/* ++ * drv_init() - a device potentially for us ++ * ++ * notes: drv_init() is called when the bus driver has located a card for us to support. ++ * We accept the new device by returning 0. ++*/ ++ ++_adapter *rtw_sw_export = NULL; ++ ++static int rtw_drv_init(struct usb_interface *pusb_intf, const struct usb_device_id *did) ++{ ++ int i; ++ uint status = _FAIL; ++ _adapter *if1 = NULL, *if2 = NULL; ++ struct dvobj_priv *dvobj = NULL; ++ ++ ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("+rtw_drv_init\n")); ++ ++ ++ //step 0. ++ process_spec_devid(did); ++ ++ /* Initialize dvobj_priv */ ++ if ((dvobj = usb_dvobj_init(pusb_intf)) == NULL) { ++ RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("initialize device object priv Failed!\n")); ++ goto exit; ++ } ++ ++ /* Initialize if1 */ ++ if ((if1 = rtw_usb_if1_init(dvobj, pusb_intf, did)) == NULL) { ++ DBG_871X("rtw_usb_if1_init Failed!\n"); ++ goto free_dvobj; ++ } ++ ++ /* Initialize if2 */ ++#ifdef CONFIG_CONCURRENT_MODE ++ if((if2 = rtw_drv_if2_init(if1, usb_set_intf_ops)) == NULL) { ++ goto free_if1; ++ } ++#ifdef CONFIG_MULTI_VIR_IFACES ++ for(i=0; iregistrypriv.ext_iface_num;i++) ++ { ++ if(rtw_drv_add_vir_if(if1, usb_set_intf_ops) == NULL) ++ { ++ DBG_871X("rtw_drv_add_iface failed! (%d)\n", i); ++ goto free_if1; ++ } ++ } ++#endif //CONFIG_MULTI_VIR_IFACES ++#endif ++ ++#ifdef CONFIG_INTEL_PROXIM ++ rtw_sw_export=if1; ++#endif ++ ++#ifdef CONFIG_GLOBAL_UI_PID ++ if (ui_pid[1]!=0) { ++ DBG_871X("ui_pid[1]:%d\n",ui_pid[1]); ++ rtw_signal_process(ui_pid[1], SIGUSR2); ++ } ++#endif ++ ++ //dev_alloc_name && register_netdev ++ if((status = rtw_drv_register_netdev(if1)) != _SUCCESS) { ++ goto free_if1; ++ } ++ ++#ifdef CONFIG_HOSTAPD_MLME ++ hostapd_mode_init(if1); ++#endif ++ ++#ifdef CONFIG_PLATFORM_RTD2880B ++ DBG_871X("wlan link up\n"); ++ rtd2885_wlan_netlink_sendMsg("linkup", "8712"); ++#endif ++ ++#ifdef RTK_DMP_PLATFORM ++ rtw_proc_init_one(if1->pnetdev); ++#endif ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-871x_drv - drv_init, success!\n")); ++ ++ status = _SUCCESS; ++ ++free_if1: ++ if (status != _SUCCESS && if1) { ++ rtw_usb_if1_deinit(if1); ++ } ++free_dvobj: ++ if (status != _SUCCESS) ++ usb_dvobj_deinit(pusb_intf); ++exit: ++ return status == _SUCCESS?0:-ENODEV; ++} ++ ++/* ++ * dev_remove() - our device is being removed ++*/ ++//rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both ++static void rtw_dev_remove(struct usb_interface *pusb_intf) ++{ ++ struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf); ++ _adapter *padapter = dvobj->if1; ++ ++_func_exit_; ++ ++ DBG_871X("+rtw_dev_remove\n"); ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+dev_remove()\n")); ++ ++ dvobj->processing_dev_remove = _TRUE; ++ ++ rtw_unregister_netdevs(dvobj); ++ ++ if(usb_drv->drv_registered == _TRUE) ++ { ++ //DBG_871X("r871xu_dev_remove():padapter->bSurpriseRemoved == _TRUE\n"); ++ padapter->bSurpriseRemoved = _TRUE; ++ } ++ /*else ++ { ++ //DBG_871X("r871xu_dev_remove():module removed\n"); ++ padapter->hw_init_completed = _FALSE; ++ }*/ ++ ++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER) ++ rtw_unregister_early_suspend(&padapter->pwrctrlpriv); ++#endif ++ ++ rtw_pm_set_ips(padapter, IPS_NONE); ++ rtw_pm_set_lps(padapter, PS_MODE_ACTIVE); ++ ++ LeaveAllPowerSaveMode(padapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++#ifdef CONFIG_MULTI_VIR_IFACES ++ rtw_drv_stop_vir_ifaces(dvobj); ++#endif //CONFIG_MULTI_VIR_IFACES ++ rtw_drv_if2_stop(dvobj->if2); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ rtw_usb_if1_deinit(padapter); ++ ++#ifdef CONFIG_CONCURRENT_MODE ++#ifdef CONFIG_MULTI_VIR_IFACES ++ rtw_drv_free_vir_ifaces(dvobj); ++#endif //CONFIG_MULTI_VIR_IFACES ++ rtw_drv_if2_free(dvobj->if2); ++#endif //CONFIG_CONCURRENT_MODE ++ ++ usb_dvobj_deinit(pusb_intf); ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-dev_remove()\n")); ++ DBG_871X("-r871xu_dev_remove, done\n"); ++ ++ ++#ifdef CONFIG_INTEL_PROXIM ++ rtw_sw_export=NULL; ++#endif ++ ++_func_exit_; ++ ++ return; ++ ++} ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) ++extern int console_suspend_enabled; ++#endif ++ ++static int __init rtw_drv_entry(void) ++{ ++#ifdef CONFIG_PLATFORM_RTK_DMP ++ u32 tmp; ++ tmp=readl((volatile unsigned int*)0xb801a608); ++ tmp &= 0xffffff00; ++ tmp |= 0x55; ++ writel(tmp,(volatile unsigned int*)0xb801a608);//write dummy register for 1055 ++#endif ++#ifdef CONFIG_PLATFORM_ARM_SUNxI ++#ifndef CONFIG_RTL8723A ++ int ret = 0; ++ /* ----------get usb_wifi_usbc_num------------- */ ++ ret = script_parser_fetch("usb_wifi_para", "usb_wifi_usbc_num", (int *)&usb_wifi_host, 64); ++ if(ret != 0){ ++ printk("ERR: script_parser_fetch usb_wifi_usbc_num failed\n"); ++ ret = -ENOMEM; ++ return ret; ++ } ++ printk("sw_usb_enable_hcd: usbc_num = %d\n", usb_wifi_host); ++ sw_usb_enable_hcd(usb_wifi_host); ++#endif //CONFIG_RTL8723A ++#endif //CONFIG_PLATFORM_ARM_SUNxI ++ ++#ifdef CONFIG_PLATFORM_ARM_SUN6I ++ script_item_value_type_e type; ++ ++ type = script_get_item("wifi_para", "wifi_usbc_id", &item); ++ if(SCIRPT_ITEM_VALUE_TYPE_INT != type){ ++ printk("ERR: script_get_item wifi_usbc_id failed\n"); ++ return -ENOMEM; ++ } ++ ++ printk("sw_usb_enable_hcd: usbc_num = %d\n", item.val); ++ wifi_pm_power(1); ++ mdelay(10); ++ sw_usb_enable_hcd(item.val); ++#endif //CONFIG_PLATFORM_ARM_SUN6I ++ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_entry\n")); ++ ++ DBG_871X(DRV_NAME " driver version=%s\n", DRIVERVERSION); ++ DBG_871X("build time: %s %s\n", __DATE__, __TIME__); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) ++ //console_suspend_enabled=0; ++#endif ++ ++ rtw_suspend_lock_init(); ++ ++ usb_drv->drv_registered = _TRUE; ++ return usb_register(&usb_drv->usbdrv); ++} ++ ++static void __exit rtw_drv_halt(void) ++{ ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_halt\n")); ++ DBG_871X("+rtw_drv_halt\n"); ++ ++ usb_drv->drv_registered = _FALSE; ++ usb_deregister(&usb_drv->usbdrv); ++ ++#ifdef CONFIG_PLATFORM_ARM_SUNxI ++#ifndef CONFIG_RTL8723A ++ printk("sw_usb_disable_hcd: usbc_num = %d\n", usb_wifi_host); ++ sw_usb_disable_hcd(usb_wifi_host); ++#endif //ifndef CONFIG_RTL8723A ++#endif //CONFIG_PLATFORM_ARM_SUNxI ++#ifdef CONFIG_PLATFORM_ARM_SUN6I ++ sw_usb_disable_hcd(item.val); ++ wifi_pm_power(0); ++#endif ++ ++ rtw_suspend_lock_uninit(); ++ DBG_871X("-rtw_drv_halt\n"); ++ ++ rtw_mstat_dump(); ++} ++ ++ ++module_init(rtw_drv_entry); ++module_exit(rtw_drv_halt); ++ ++#ifdef CONFIG_WOWLAN ++#ifdef CONFIG_WOWLAN_MANUAL ++ ++int rtw_resume_toshiba(PADAPTER Adapter) ++{ ++ struct dvobj_priv *pdvobjpriv; ++ pdvobjpriv = adapter_to_dvobj(Adapter); ++ ++ rtw_resume(pdvobjpriv->pusbintf); ++ return 0; ++} ++ ++int rtw_suspend_toshiba(PADAPTER Adapter) ++{ ++ pm_message_t msg; ++ struct dvobj_priv *pdvobjpriv; ++ pdvobjpriv = adapter_to_dvobj(Adapter); ++ msg.event=0; ++ //for Toshiba only, they should call rtw_suspend before suspend ++ rtw_suspend(pdvobjpriv->pusbintf, msg); ++ return 0; ++} ++EXPORT_SYMBOL(rtw_suspend_toshiba); ++EXPORT_SYMBOL(rtw_resume_toshiba); ++#endif //CONFIG_WOWLAN_MANUAL ++#endif //CONFIG_WOWLAN ++ ++#ifdef CONFIG_INTEL_PROXIM ++_adapter *rtw_usb_get_sw_pointer(void) ++{ ++ return rtw_sw_export; ++} ++EXPORT_SYMBOL(rtw_usb_get_sw_pointer); ++#endif //CONFIG_INTEL_PROXIM +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_ops_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_ops_linux.c +new file mode 100644 +index 000000000000..acb58ef82d21 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_ops_linux.c +@@ -0,0 +1,648 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ *******************************************************************************/ ++#define _USB_OPS_LINUX_C_ ++ ++#include ++#include ++#include ++ ++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ ++static void _usbctrl_vendorreq_async_callback(struct urb *urb, struct pt_regs *regs) ++{ ++ if (urb) { ++ if (urb->context) { ++ rtw_mfree(urb->context); ++ } ++ usb_free_urb(urb); ++ } ++} ++ ++static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request, ++ u16 value, u16 index, void *pdata, u16 len, u8 requesttype) ++{ ++ int rc; ++ unsigned int pipe; ++ u8 reqtype; ++ struct usb_ctrlrequest *dr; ++ struct urb *urb; ++ struct rtl819x_async_write_data { ++ u8 data[VENDOR_CMD_MAX_DATA_LEN]; ++ struct usb_ctrlrequest dr; ++ } *buf; ++ ++ ++ if (requesttype == VENDOR_READ) { ++ pipe = usb_rcvctrlpipe(udev, 0);//read_in ++ reqtype = REALTEK_USB_VENQT_READ; ++ } ++ else { ++ pipe = usb_sndctrlpipe(udev, 0);//write_out ++ reqtype = REALTEK_USB_VENQT_WRITE; ++ } ++ ++ buf = (struct rtl819x_async_write_data *)rtw_zmalloc(sizeof(*buf)); ++ if (!buf) { ++ rc = -ENOMEM; ++ goto exit; ++ } ++ ++ urb = usb_alloc_urb(0, GFP_ATOMIC); ++ if (!urb) { ++ rtw_mfree((u8*)buf, sizeof(*buf)); ++ rc = -ENOMEM; ++ goto exit; ++ } ++ ++ dr = &buf->dr; ++ ++ dr->bRequestType = reqtype; ++ dr->bRequest = request; ++ dr->wValue = cpu_to_le16(value); ++ dr->wIndex = cpu_to_le16(index); ++ dr->wLength = cpu_to_le16(len); ++ ++ _rtw_memcpy(buf, pdata, len); ++ ++ usb_fill_control_urb(urb, udev, pipe, (unsigned char *)dr, buf, len, ++ _usbctrl_vendorreq_async_callback, buf); ++ ++ rc = usb_submit_urb(urb, GFP_ATOMIC); ++ if (rc < 0) { ++ rtw_mfree((u8*)buf, sizeof(*buf)); ++ usb_free_urb(urb); ++ } ++ ++exit: ++ return rc; ++} ++ ++int usb_write_async(struct usb_device *udev, u32 addr, void *pdata, u16 len) ++{ ++ u8 request; ++ u8 requesttype; ++ u16 wvalue; ++ u16 index; ++ ++ int ret; ++ ++ requesttype = VENDOR_WRITE;//write_out ++ request = REALTEK_USB_VENQT_CMD_REQ; ++ index = REALTEK_USB_VENQT_CMD_IDX;//n/a ++ ++ wvalue = (u16)(addr&0x0000ffff); ++ ++ ret = _usbctrl_vendorreq_async_write(udev, request, wvalue, index, pdata, len, requesttype); ++ ++ return ret; ++} ++ ++int usb_async_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val) ++{ ++ u8 data; ++ int ret; ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)pintfhdl->pintf_dev; ++ struct usb_device *udev=pdvobjpriv->pusbdev; ++ ++ _func_enter_; ++ data = val; ++ ret = usb_write_async(udev, addr, &data, 1); ++ _func_exit_; ++ ++ return ret; ++} ++ ++int usb_async_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val) ++{ ++ u16 data; ++ int ret; ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)pintfhdl->pintf_dev; ++ struct usb_device *udev=pdvobjpriv->pusbdev; ++ ++ _func_enter_; ++ data = val; ++ ret = usb_write_async(udev, addr, &data, 2); ++ _func_exit_; ++ ++ return ret; ++} ++ ++int usb_async_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val) ++{ ++ u32 data; ++ int ret; ++ struct dvobj_priv *pdvobjpriv = (struct dvobj_priv *)pintfhdl->pintf_dev; ++ struct usb_device *udev=pdvobjpriv->pusbdev; ++ ++ _func_enter_; ++ data = val; ++ ret = usb_write_async(udev, addr, &data, 4); ++ _func_exit_; ++ ++ return ret; ++} ++#endif /* CONFIG_USB_SUPPORT_ASYNC_VDN_REQ */ ++ ++unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr) ++{ ++ unsigned int pipe=0; ++ int ep_num=0; ++ _adapter *padapter = pdvobj->if1; ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ ++ if (addr == RECV_BULK_IN_ADDR) { ++ pipe=usb_rcvbulkpipe(pusbd, pHalData->RtBulkInPipe); ++ ++ } else if (addr == RECV_INT_IN_ADDR) { ++ pipe=usb_rcvbulkpipe(pusbd, pHalData->RtIntInPipe); ++ ++ } else if (addr < HW_QUEUE_ENTRY) { ++ ep_num = pHalData->Queue2EPNum[addr]; ++ pipe = usb_sndbulkpipe(pusbd, ep_num); ++ } ++ ++ return pipe; ++} ++ ++struct zero_bulkout_context{ ++ void *pbuf; ++ void *purb; ++ void *pirp; ++ void *padapter; ++}; ++ ++static void usb_bulkout_zero_complete(struct urb *purb, struct pt_regs *regs) ++{ ++ struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)purb->context; ++ ++ //DBG_8192C("+usb_bulkout_zero_complete\n"); ++ ++ if(pcontext) ++ { ++ if(pcontext->pbuf) ++ { ++ rtw_mfree(pcontext->pbuf, sizeof(int)); ++ } ++ ++ if(pcontext->purb && (pcontext->purb==purb)) ++ { ++ usb_free_urb(pcontext->purb); ++ } ++ ++ ++ rtw_mfree((u8*)pcontext, sizeof(struct zero_bulkout_context)); ++ } ++ ++ ++} ++ ++static u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr) ++{ ++ int pipe, status, len; ++ u32 ret; ++ unsigned char *pbuf; ++ struct zero_bulkout_context *pcontext; ++ PURB purb = NULL; ++ _adapter *padapter = (_adapter *)pintfhdl->padapter; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ ++ //DBG_871X("%s\n", __func__); ++ ++ ++ if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) ++ { ++ return _FAIL; ++ } ++ ++ ++ pcontext = (struct zero_bulkout_context *)rtw_zmalloc(sizeof(struct zero_bulkout_context)); ++ ++ pbuf = (unsigned char *)rtw_zmalloc(sizeof(int)); ++ purb = usb_alloc_urb(0, GFP_ATOMIC); ++ ++ len = 0; ++ pcontext->pbuf = pbuf; ++ pcontext->purb = purb; ++ pcontext->pirp = NULL; ++ pcontext->padapter = padapter; ++ ++ ++ //translate DMA FIFO addr to pipehandle ++ //pipe = ffaddr2pipehdl(pdvobj, addr); ++ ++ usb_fill_bulk_urb(purb, pusbd, pipe, ++ pbuf, ++ len, ++ usb_bulkout_zero_complete, ++ pcontext);//context is pcontext ++ ++ status = usb_submit_urb(purb, GFP_ATOMIC); ++ ++ if (!status) ++ { ++ ret= _SUCCESS; ++ } ++ else ++ { ++ ret= _FAIL; ++ } ++ ++ ++ return _SUCCESS; ++ ++} ++ ++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem) ++{ ++ ++} ++ ++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ ++} ++ ++ ++void usb_read_port_cancel(struct intf_hdl *pintfhdl) ++{ ++ int i; ++ struct recv_buf *precvbuf; ++ _adapter *padapter = pintfhdl->padapter; ++ precvbuf = (struct recv_buf *)padapter->recvpriv.precv_buf; ++ ++ DBG_871X("%s\n", __func__); ++ ++ padapter->bReadPortCancel = _TRUE; ++ ++ for (i=0; i < NR_RECVBUFF ; i++) { ++ ++ precvbuf->reuse = _TRUE; ++ if (precvbuf->purb) { ++ //DBG_8192C("usb_read_port_cancel : usb_kill_urb \n"); ++ usb_kill_urb(precvbuf->purb); ++ } ++ precvbuf++; ++ } ++ ++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE ++ usb_kill_urb(padapter->recvpriv.int_in_urb); ++#endif ++} ++ ++static void usb_write_port_complete(struct urb *purb, struct pt_regs *regs) ++{ ++ _irqL irqL; ++ int i; ++ struct xmit_buf *pxmitbuf = (struct xmit_buf *)purb->context; ++ //struct xmit_frame *pxmitframe = (struct xmit_frame *)pxmitbuf->priv_data; ++ //_adapter *padapter = pxmitframe->padapter; ++ _adapter *padapter = pxmitbuf->padapter; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ //struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ ++_func_enter_; ++ ++ switch(pxmitbuf->flags) ++ { ++ case VO_QUEUE_INX: ++ pxmitpriv->voq_cnt--; ++ break; ++ case VI_QUEUE_INX: ++ pxmitpriv->viq_cnt--; ++ break; ++ case BE_QUEUE_INX: ++ pxmitpriv->beq_cnt--; ++ break; ++ case BK_QUEUE_INX: ++ pxmitpriv->bkq_cnt--; ++ break; ++ case HIGH_QUEUE_INX: ++#ifdef CONFIG_AP_MODE ++ rtw_chk_hi_queue_cmd(padapter); ++#endif ++ break; ++ default: ++ break; ++ } ++ ++ ++/* ++ _enter_critical(&pxmitpriv->lock, &irqL); ++ ++ pxmitpriv->txirp_cnt--; ++ ++ switch(pattrib->priority) ++ { ++ case 1: ++ case 2: ++ pxmitpriv->bkq_cnt--; ++ //DBG_8192C("pxmitpriv->bkq_cnt=%d\n", pxmitpriv->bkq_cnt); ++ break; ++ case 4: ++ case 5: ++ pxmitpriv->viq_cnt--; ++ //DBG_8192C("pxmitpriv->viq_cnt=%d\n", pxmitpriv->viq_cnt); ++ break; ++ case 6: ++ case 7: ++ pxmitpriv->voq_cnt--; ++ //DBG_8192C("pxmitpriv->voq_cnt=%d\n", pxmitpriv->voq_cnt); ++ break; ++ case 0: ++ case 3: ++ default: ++ pxmitpriv->beq_cnt--; ++ //DBG_8192C("pxmitpriv->beq_cnt=%d\n", pxmitpriv->beq_cnt); ++ break; ++ ++ } ++ ++ _exit_critical(&pxmitpriv->lock, &irqL); ++ ++ ++ if(pxmitpriv->txirp_cnt==0) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n")); ++ _rtw_up_sema(&(pxmitpriv->tx_retevt)); ++ } ++*/ ++ //rtw_free_xmitframe(pxmitpriv, pxmitframe); ++ ++ if(padapter->bSurpriseRemoved || padapter->bDriverStopped ||padapter->bWritePortCancel) ++ { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved)); ++ DBG_8192C("%s(): TX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bWritePortCancel(%d) pxmitbuf->ext_tag(%x) \n", ++ __FUNCTION__,padapter->bDriverStopped, padapter->bSurpriseRemoved,padapter->bReadPortCancel,pxmitbuf->ext_tag); ++ ++ goto check_completion; ++ } ++ ++ ++ if (purb->status==0) { ++ ++ } else { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete : purb->status(%d) != 0 \n", purb->status)); ++ DBG_871X("###=> urb_write_port_complete status(%d)\n",purb->status); ++ if((purb->status==-EPIPE)||(purb->status==-EPROTO)) ++ { ++ //usb_clear_halt(pusbdev, purb->pipe); ++ //msleep(10); ++ sreset_set_wifi_error_status(padapter, USB_WRITE_PORT_FAIL); ++ } else if (purb->status == -EINPROGRESS) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: EINPROGESS\n")); ++ goto check_completion; ++ ++ } else if (purb->status == -ENOENT) { ++ DBG_871X("%s: -ENOENT\n", __func__); ++ goto check_completion; ++ ++ } else if (purb->status == -ECONNRESET) { ++ DBG_871X("%s: -ECONNRESET\n", __func__); ++ goto check_completion; ++ ++ } else if (purb->status == -ESHUTDOWN) { ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: ESHUTDOWN\n")); ++ padapter->bDriverStopped=_TRUE; ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped=TRUE\n")); ++ ++ goto check_completion; ++ } ++ else ++ { ++ padapter->bSurpriseRemoved=_TRUE; ++ DBG_8192C("bSurpriseRemoved=TRUE\n"); ++ //rtl8192cu_trigger_gpio_0(padapter); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bSurpriseRemoved=TRUE\n")); ++ ++ goto check_completion; ++ } ++ } ++ ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ { ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.last_tx_complete_time = rtw_get_current_time(); ++ } ++ #endif ++ ++check_completion: ++ _enter_critical(&pxmitpriv->lock_sctx, &irqL); ++ rtw_sctx_done_err(&pxmitbuf->sctx, ++ purb->status ? RTW_SCTX_DONE_WRITE_PORT_ERR : RTW_SCTX_DONE_SUCCESS); ++ _exit_critical(&pxmitpriv->lock_sctx, &irqL); ++ ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++ ++ //if(rtw_txframes_pending(padapter)) ++ { ++ tasklet_hi_schedule(&pxmitpriv->xmit_tasklet); ++ } ++ ++_func_exit_; ++ ++} ++ ++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem) ++{ ++ _irqL irqL; ++ unsigned int pipe; ++ int status; ++ u32 ret = _FAIL, bwritezero = _FALSE; ++ PURB purb = NULL; ++ _adapter *padapter = (_adapter *)pintfhdl->padapter; ++ struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ struct xmit_buf *pxmitbuf = (struct xmit_buf *)wmem; ++ struct xmit_frame *pxmitframe = (struct xmit_frame *)pxmitbuf->priv_data; ++ struct usb_device *pusbd = pdvobj->pusbdev; ++ struct pkt_attrib *pattrib = &pxmitframe->attrib; ++ ++_func_enter_; ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("+usb_write_port\n")); ++ ++ if ((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) { ++ #ifdef DBG_TX ++ DBG_871X(" DBG_TX %s:%d bDriverStopped%d, bSurpriseRemoved:%d, pnp_bstop_trx:%d\n",__FUNCTION__, __LINE__ ++ ,padapter->bDriverStopped, padapter->bSurpriseRemoved, padapter->pwrctrlpriv.pnp_bstop_trx ); ++ #endif ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n")); ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_TX_DENY); ++ goto exit; ++ } ++ ++ _enter_critical(&pxmitpriv->lock, &irqL); ++ ++ switch(addr) ++ { ++ case VO_QUEUE_INX: ++ pxmitpriv->voq_cnt++; ++ pxmitbuf->flags = VO_QUEUE_INX; ++ break; ++ case VI_QUEUE_INX: ++ pxmitpriv->viq_cnt++; ++ pxmitbuf->flags = VI_QUEUE_INX; ++ break; ++ case BE_QUEUE_INX: ++ pxmitpriv->beq_cnt++; ++ pxmitbuf->flags = BE_QUEUE_INX; ++ break; ++ case BK_QUEUE_INX: ++ pxmitpriv->bkq_cnt++; ++ pxmitbuf->flags = BK_QUEUE_INX; ++ break; ++ case HIGH_QUEUE_INX: ++ pxmitbuf->flags = HIGH_QUEUE_INX; ++ break; ++ default: ++ pxmitbuf->flags = MGT_QUEUE_INX; ++ break; ++ } ++ ++ _exit_critical(&pxmitpriv->lock, &irqL); ++ ++ purb = pxmitbuf->pxmit_urb[0]; ++ ++#if 0 ++ if(pdvobj->ishighspeed) ++ { ++ if(cnt> 0 && cnt%512 == 0) ++ { ++ //DBG_8192C("ishighspeed, cnt=%d\n", cnt); ++ bwritezero = _TRUE; ++ } ++ } ++ else ++ { ++ if(cnt > 0 && cnt%64 == 0) ++ { ++ //DBG_8192C("cnt=%d\n", cnt); ++ bwritezero = _TRUE; ++ } ++ } ++#endif ++ ++ //translate DMA FIFO addr to pipehandle ++ pipe = ffaddr2pipehdl(pdvobj, addr); ++ ++#ifdef CONFIG_REDUCE_USB_TX_INT ++ if ( (pxmitpriv->free_xmitbuf_cnt%NR_XMITBUFF == 0) ++ || (pxmitbuf->ext_tag == _TRUE) ) ++ { ++ purb->transfer_flags &= (~URB_NO_INTERRUPT); ++ } else { ++ purb->transfer_flags |= URB_NO_INTERRUPT; ++ //DBG_8192C("URB_NO_INTERRUPT "); ++ } ++#endif ++ ++ ++ usb_fill_bulk_urb(purb, pusbd, pipe, ++ pxmitframe->buf_addr, //= pxmitbuf->pbuf ++ cnt, ++ usb_write_port_complete, ++ pxmitbuf);//context is pxmitbuf ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX ++ purb->transfer_dma = pxmitbuf->dma_transfer_addr; ++ purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; ++ purb->transfer_flags |= URB_ZERO_PACKET; ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ ++#if 0 ++ if (bwritezero) ++ { ++ purb->transfer_flags |= URB_ZERO_PACKET; ++ } ++#endif ++ ++ status = usb_submit_urb(purb, GFP_ATOMIC); ++ if (!status) { ++ #ifdef DBG_CONFIG_ERROR_DETECT ++ { ++ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); ++ pHalData->srestpriv.last_tx_time = rtw_get_current_time(); ++ } ++ #endif ++ } else { ++ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_WRITE_PORT_ERR); ++ DBG_871X("usb_write_port, status=%d\n", status); ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port(): usb_submit_urb, status=%x\n", status)); ++ ++ switch (status) { ++ case -ENODEV: ++ padapter->bDriverStopped=_TRUE; ++ break; ++ default: ++ break; ++ } ++ goto exit; ++ } ++ ++ ret= _SUCCESS; ++ ++// Commented by Albert 2009/10/13 ++// We add the URB_ZERO_PACKET flag to urb so that the host will send the zero packet automatically. ++/* ++ if(bwritezero == _TRUE) ++ { ++ usb_bulkout_zero(pintfhdl, addr); ++ } ++*/ ++ ++ RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("-usb_write_port\n")); ++ ++exit: ++ if (ret != _SUCCESS) ++ rtw_free_xmitbuf(pxmitpriv, pxmitbuf); ++_func_exit_; ++ return ret; ++ ++} ++ ++void usb_write_port_cancel(struct intf_hdl *pintfhdl) ++{ ++ int i, j; ++ _adapter *padapter = pintfhdl->padapter; ++ struct xmit_buf *pxmitbuf = (struct xmit_buf *)padapter->xmitpriv.pxmitbuf; ++ ++ DBG_871X("%s \n", __func__); ++ ++ padapter->bWritePortCancel = _TRUE; ++ ++ for (i=0; ipxmit_urb[j]) { ++ usb_kill_urb(pxmitbuf->pxmit_urb[j]); ++ } ++ } ++ pxmitbuf++; ++ } ++ ++ pxmitbuf = (struct xmit_buf*)padapter->xmitpriv.pxmit_extbuf; ++ for (i = 0; i < NR_XMIT_EXTBUFF; i++) { ++ for (j=0; j<8; j++) { ++ if(pxmitbuf->pxmit_urb[j]) { ++ usb_kill_urb(pxmitbuf->pxmit_urb[j]); ++ } ++ } ++ pxmitbuf++; ++ } ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/xmit_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/xmit_linux.c +new file mode 100644 +index 000000000000..13dc4465fc3d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/xmit_linux.c +@@ -0,0 +1,420 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++#define _XMIT_OSDEP_C_ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++uint rtw_remainder_len(struct pkt_file *pfile) ++{ ++ return (pfile->buf_len - ((SIZE_PTR)(pfile->cur_addr) - (SIZE_PTR)(pfile->buf_start))); ++} ++ ++void _rtw_open_pktfile (_pkt *pktptr, struct pkt_file *pfile) ++{ ++_func_enter_; ++ ++ pfile->pkt = pktptr; ++ pfile->cur_addr = pfile->buf_start = pktptr->data; ++ pfile->pkt_len = pfile->buf_len = pktptr->len; ++ ++ pfile->cur_buffer = pfile->buf_start ; ++ ++_func_exit_; ++} ++ ++uint _rtw_pktfile_read (struct pkt_file *pfile, u8 *rmem, uint rlen) ++{ ++ uint len = 0; ++ ++_func_enter_; ++ ++ len = rtw_remainder_len(pfile); ++ len = (rlen > len)? len: rlen; ++ ++ if(rmem) ++ skb_copy_bits(pfile->pkt, pfile->buf_len-pfile->pkt_len, rmem, len); ++ ++ pfile->cur_addr += len; ++ pfile->pkt_len -= len; ++ ++_func_exit_; ++ ++ return len; ++} ++ ++sint rtw_endofpktfile(struct pkt_file *pfile) ++{ ++_func_enter_; ++ ++ if (pfile->pkt_len == 0) { ++_func_exit_; ++ return _TRUE; ++ } ++ ++_func_exit_; ++ ++ return _FALSE; ++} ++ ++void rtw_set_tx_chksum_offload(_pkt *pkt, struct pkt_attrib *pattrib) ++{ ++ ++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX ++ struct sk_buff *skb = (struct sk_buff *)pkt; ++ pattrib->hw_tcp_csum = 0; ++ ++ if (skb->ip_summed == CHECKSUM_PARTIAL) { ++ if (skb_shinfo(skb)->nr_frags == 0) ++ { ++ const struct iphdr *ip = ip_hdr(skb); ++ if (ip->protocol == IPPROTO_TCP) { ++ // TCP checksum offload by HW ++ DBG_871X("CHECKSUM_PARTIAL TCP\n"); ++ pattrib->hw_tcp_csum = 1; ++ //skb_checksum_help(skb); ++ } else if (ip->protocol == IPPROTO_UDP) { ++ //DBG_871X("CHECKSUM_PARTIAL UDP\n"); ++#if 1 ++ skb_checksum_help(skb); ++#else ++ // Set UDP checksum = 0 to skip checksum check ++ struct udphdr *udp = skb_transport_header(skb); ++ udp->check = 0; ++#endif ++ } else { ++ DBG_871X("%s-%d TCP CSUM offload Error!!\n", __FUNCTION__, __LINE__); ++ WARN_ON(1); /* we need a WARN() */ ++ } ++ } ++ else { // IP fragmentation case ++ DBG_871X("%s-%d nr_frags != 0, using skb_checksum_help(skb);!!\n", __FUNCTION__, __LINE__); ++ skb_checksum_help(skb); ++ } ++ } ++#endif ++ ++} ++ ++int rtw_os_xmit_resource_alloc(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 alloc_sz) ++{ ++#ifdef CONFIG_USB_HCI ++ int i; ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct usb_device *pusbd = pdvobjpriv->pusbdev; ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX ++ pxmitbuf->pallocated_buf = rtw_usb_buffer_alloc(pusbd, (size_t)alloc_sz, &pxmitbuf->dma_transfer_addr); ++ pxmitbuf->pbuf = pxmitbuf->pallocated_buf; ++ if(pxmitbuf->pallocated_buf == NULL) ++ return _FAIL; ++#else // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ ++ pxmitbuf->pallocated_buf = rtw_zmalloc(alloc_sz); ++ if (pxmitbuf->pallocated_buf == NULL) ++ { ++ return _FAIL; ++ } ++ ++ pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ); ++ pxmitbuf->dma_transfer_addr = 0; ++ ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ ++ for(i=0; i<8; i++) ++ { ++ pxmitbuf->pxmit_urb[i] = usb_alloc_urb(0, GFP_KERNEL); ++ if(pxmitbuf->pxmit_urb[i] == NULL) ++ { ++ DBG_871X("pxmitbuf->pxmit_urb[i]==NULL"); ++ return _FAIL; ++ } ++ ++ } ++#endif ++#if defined(CONFIG_PCI_HCI) || defined(CONFIG_SDIO_HCI) ++ pxmitbuf->pallocated_buf = rtw_zmalloc(alloc_sz); ++ if (pxmitbuf->pallocated_buf == NULL) ++ { ++ return _FAIL; ++ } ++ ++ pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ); ++#endif ++ ++ return _SUCCESS; ++} ++ ++void rtw_os_xmit_resource_free(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 free_sz) ++{ ++#ifdef CONFIG_USB_HCI ++ int i; ++ struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); ++ struct usb_device *pusbd = pdvobjpriv->pusbdev; ++ ++ ++ for(i=0; i<8; i++) ++ { ++ if(pxmitbuf->pxmit_urb[i]) ++ { ++ //usb_kill_urb(pxmitbuf->pxmit_urb[i]); ++ usb_free_urb(pxmitbuf->pxmit_urb[i]); ++ } ++ } ++ ++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX ++ rtw_usb_buffer_free(pusbd, (size_t)free_sz, pxmitbuf->pallocated_buf, pxmitbuf->dma_transfer_addr); ++ pxmitbuf->pallocated_buf = NULL; ++ pxmitbuf->dma_transfer_addr = 0; ++#else // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ if(pxmitbuf->pallocated_buf) ++ rtw_mfree(pxmitbuf->pallocated_buf, free_sz); ++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX ++ ++#endif ++#if defined(CONFIG_PCI_HCI) || defined(CONFIG_SDIO_HCI) ++ if(pxmitbuf->pallocated_buf) ++ rtw_mfree(pxmitbuf->pallocated_buf, free_sz); ++#endif ++} ++ ++void rtw_os_pkt_complete(_adapter *padapter, _pkt *pkt) ++{ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ u16 queue; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ ++ queue = skb_get_queue_mapping(pkt); ++ if(__netif_subqueue_stopped(padapter->pnetdev, queue) && ++ (pxmitpriv->hwxmits[queue].accnt < NR_XMITFRAME/2)) ++ { ++ netif_wake_subqueue(padapter->pnetdev, queue); ++ } ++#else ++ if (netif_queue_stopped(padapter->pnetdev)) ++ netif_wake_queue(padapter->pnetdev); ++#endif ++ ++ rtw_skb_free(pkt); ++} ++ ++void rtw_os_xmit_complete(_adapter *padapter, struct xmit_frame *pxframe) ++{ ++ if(pxframe->pkt) ++ rtw_os_pkt_complete(padapter, pxframe->pkt); ++ ++ pxframe->pkt = NULL; ++} ++ ++void rtw_os_xmit_schedule(_adapter *padapter) ++{ ++#ifdef CONFIG_SDIO_HCI ++ if(!padapter) ++ return; ++ ++ if (rtw_txframes_pending(padapter)) ++ _rtw_up_sema(&padapter->xmitpriv.xmit_sema); ++#else ++ _irqL irqL; ++ struct xmit_priv *pxmitpriv; ++ ++ if(!padapter) ++ return; ++ ++ pxmitpriv = &padapter->xmitpriv; ++ ++ _enter_critical_bh(&pxmitpriv->lock, &irqL); ++ ++ if(rtw_txframes_pending(padapter)) ++ { ++ tasklet_hi_schedule(&pxmitpriv->xmit_tasklet); ++ } ++ ++ _exit_critical_bh(&pxmitpriv->lock, &irqL); ++#endif ++} ++ ++ ++ ++#ifdef CONFIG_TX_MCAST2UNI ++int rtw_mlcst2unicst(_adapter *padapter, struct sk_buff *skb) ++{ ++ struct sta_priv *pstapriv = &padapter->stapriv; ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++ _irqL irqL; ++ _list *phead, *plist; ++ struct sk_buff *newskb; ++ struct sta_info *psta = NULL; ++ u8 chk_alive_num = 0; ++ char chk_alive_list[NUM_STA]; ++ u8 bc_addr[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; ++ u8 null_addr[6]={0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; ++ ++ int i; ++ s32 res; ++ ++ _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ phead = &pstapriv->asoc_list; ++ plist = get_next(phead); ++ ++ //free sta asoc_queue ++ while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) { ++ int stainfo_offset; ++ psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list); ++ plist = get_next(plist); ++ ++ stainfo_offset = rtw_stainfo_offset(pstapriv, psta); ++ if (stainfo_offset_valid(stainfo_offset)) { ++ chk_alive_list[chk_alive_num++] = stainfo_offset; ++ } ++ } ++ _exit_critical_bh(&pstapriv->asoc_list_lock, &irqL); ++ ++ for (i = 0; i < chk_alive_num; i++) { ++ psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]); ++ ++ /* avoid come from STA1 and send back STA1 */ ++ if (_rtw_memcmp(psta->hwaddr, &skb->data[6], 6) == _TRUE ++ || _rtw_memcmp(psta->hwaddr, null_addr, 6) == _TRUE ++ || _rtw_memcmp(psta->hwaddr, bc_addr, 6) == _TRUE ++ ) ++ continue; ++ ++ newskb = rtw_skb_copy(skb); ++ ++ if (newskb) { ++ _rtw_memcpy(newskb->data, psta->hwaddr, 6); ++ res = rtw_xmit(padapter, &newskb); ++ if (res < 0) { ++ DBG_871X("%s()-%d: rtw_xmit() return error!\n", __FUNCTION__, __LINE__); ++ pxmitpriv->tx_drop++; ++ rtw_skb_free(newskb); ++ } else ++ pxmitpriv->tx_pkts++; ++ } else { ++ DBG_871X("%s-%d: rtw_skb_copy() failed!\n", __FUNCTION__, __LINE__); ++ pxmitpriv->tx_drop++; ++ //rtw_skb_free(skb); ++ return _FALSE; // Caller shall tx this multicast frame via normal way. ++ } ++ } ++ ++ rtw_skb_free(skb); ++ return _TRUE; ++} ++#endif // CONFIG_TX_MCAST2UNI ++ ++ ++int _rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev) ++{ ++ _adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev); ++ struct xmit_priv *pxmitpriv = &padapter->xmitpriv; ++#ifdef CONFIG_TX_MCAST2UNI ++ struct mlme_priv *pmlmepriv = &padapter->mlmepriv; ++ extern int rtw_mc2u_disable; ++#endif // CONFIG_TX_MCAST2UNI ++ s32 res = 0; ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ u16 queue; ++#endif ++ ++_func_enter_; ++ ++ RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("+xmit_enry\n")); ++ ++ if (rtw_if_up(padapter) == _FALSE) { ++ RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit_entry: rtw_if_up fail\n")); ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s if_up fail\n", __FUNCTION__); ++ #endif ++ goto drop_packet; ++ } ++ ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)) ++ queue = skb_get_queue_mapping(pkt); ++ /* No free space for Tx, tx_worker is too slow */ ++ if (pxmitpriv->hwxmits[queue].accnt > NR_XMITFRAME/2) { ++ //DBG_871X("%s(): stop netif_subqueue[%d]\n", __FUNCTION__, queue); ++ netif_stop_subqueue(padapter->pnetdev, queue); ++ return NETDEV_TX_BUSY; ++ } ++#endif ++ ++#ifdef CONFIG_TX_MCAST2UNI ++ if ( !rtw_mc2u_disable ++ && check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE ++ && ( IP_MCAST_MAC(pkt->data) ++ || ICMPV6_MCAST_MAC(pkt->data) ) ++ && (padapter->registrypriv.wifi_spec == 0) ++ ) ++ { ++ if ( pxmitpriv->free_xmitframe_cnt > (NR_XMITFRAME/4) ) { ++ res = rtw_mlcst2unicst(padapter, pkt); ++ if (res == _TRUE) { ++ goto exit; ++ } ++ } else { ++ //DBG_871X("Stop M2U(%d, %d)! ", pxmitpriv->free_xmitframe_cnt, pxmitpriv->free_xmitbuf_cnt); ++ //DBG_871X("!m2u ); ++ } ++ } ++#endif // CONFIG_TX_MCAST2UNI ++ ++ res = rtw_xmit(padapter, &pkt); ++ if (res < 0) { ++ #ifdef DBG_TX_DROP_FRAME ++ DBG_871X("DBG_TX_DROP_FRAME %s rtw_xmit fail\n", __FUNCTION__); ++ #endif ++ goto drop_packet; ++ } ++ ++ pxmitpriv->tx_pkts++; ++ RT_TRACE(_module_xmit_osdep_c_, _drv_info_, ("rtw_xmit_entry: tx_pkts=%d\n", (u32)pxmitpriv->tx_pkts)); ++ goto exit; ++ ++drop_packet: ++ pxmitpriv->tx_drop++; ++ rtw_skb_free(pkt); ++ RT_TRACE(_module_xmit_osdep_c_, _drv_notice_, ("rtw_xmit_entry: drop, tx_drop=%d\n", (u32)pxmitpriv->tx_drop)); ++ ++exit: ++ ++_func_exit_; ++ ++ return 0; ++} ++ ++int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev) ++{ ++ if (pkt) ++ rtw_mstat_update(MSTAT_TYPE_SKB, MSTAT_ALLOC_SUCCESS, pkt->truesize); ++ return _rtw_xmit_entry(pkt, pnetdev); ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c +new file mode 100644 +index 000000000000..b4a7523ee42d +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c +@@ -0,0 +1,2299 @@ ++/****************************************************************************** ++ * ++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of version 2 of the GNU General Public License as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA ++ * ++ * ++ ******************************************************************************/ ++ ++ ++#define _OSDEP_SERVICE_C_ ++ ++#include ++#include ++#include ++#include ++#ifdef PLATFORM_LINUX ++#include ++#endif ++#ifdef PLATFORM_FREEBSD ++#include ++#include ++#endif /* PLATFORM_FREEBSD */ ++#ifdef RTK_DMP_PLATFORM ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) ++#include ++#endif ++#endif ++ ++#define RT_TAG '1178' ++ ++#ifdef DBG_MEMORY_LEAK ++#ifdef PLATFORM_LINUX ++#include ++atomic_t _malloc_cnt = ATOMIC_INIT(0); ++atomic_t _malloc_size = ATOMIC_INIT(0); ++#endif ++#endif /* DBG_MEMORY_LEAK */ ++ ++ ++#if defined(PLATFORM_LINUX) ++/* ++* Translate the OS dependent @param error_code to OS independent RTW_STATUS_CODE ++* @return: one of RTW_STATUS_CODE ++*/ ++inline int RTW_STATUS_CODE(int error_code){ ++ if(error_code >=0) ++ return _SUCCESS; ++ ++ switch(error_code) { ++ //case -ETIMEDOUT: ++ // return RTW_STATUS_TIMEDOUT; ++ default: ++ return _FAIL; ++ } ++} ++#else ++inline int RTW_STATUS_CODE(int error_code){ ++ return error_code; ++} ++#endif ++ ++u32 rtw_atoi(u8* s) ++{ ++ ++ int num=0,flag=0; ++ int i; ++ for(i=0;i<=strlen(s);i++) ++ { ++ if(s[i] >= '0' && s[i] <= '9') ++ num = num * 10 + s[i] -'0'; ++ else if(s[0] == '-' && i==0) ++ flag =1; ++ else ++ break; ++ } ++ ++ if(flag == 1) ++ num = num * -1; ++ ++ return(num); ++ ++} ++ ++inline u8* _rtw_vmalloc(u32 sz) ++{ ++ u8 *pbuf; ++#ifdef PLATFORM_LINUX ++ pbuf = vmalloc(sz); ++#endif ++#ifdef PLATFORM_FREEBSD ++ pbuf = malloc(sz,M_DEVBUF,M_NOWAIT); ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG); ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++#ifdef PLATFORM_LINUX ++ if ( pbuf != NULL) { ++ atomic_inc(&_malloc_cnt); ++ atomic_add(sz, &_malloc_size); ++ } ++#endif ++#endif /* DBG_MEMORY_LEAK */ ++ ++ return pbuf; ++} ++ ++inline u8* _rtw_zvmalloc(u32 sz) ++{ ++ u8 *pbuf; ++#ifdef PLATFORM_LINUX ++ pbuf = _rtw_vmalloc(sz); ++ if (pbuf != NULL) ++ memset(pbuf, 0, sz); ++#endif ++#ifdef PLATFORM_FREEBSD ++ pbuf = malloc(sz,M_DEVBUF,M_ZERO|M_NOWAIT); ++#endif ++#ifdef PLATFORM_WINDOWS ++ NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG); ++ if (pbuf != NULL) ++ NdisFillMemory(pbuf, sz, 0); ++#endif ++ ++ return pbuf; ++} ++ ++inline void _rtw_vmfree(u8 *pbuf, u32 sz) ++{ ++#ifdef PLATFORM_LINUX ++ vfree(pbuf); ++#endif ++#ifdef PLATFORM_FREEBSD ++ free(pbuf,M_DEVBUF); ++#endif ++#ifdef PLATFORM_WINDOWS ++ NdisFreeMemory(pbuf,sz, 0); ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++#ifdef PLATFORM_LINUX ++ atomic_dec(&_malloc_cnt); ++ atomic_sub(sz, &_malloc_size); ++#endif ++#endif /* DBG_MEMORY_LEAK */ ++} ++ ++u8* _rtw_malloc(u32 sz) ++{ ++ ++ u8 *pbuf=NULL; ++ ++#ifdef PLATFORM_LINUX ++#ifdef RTK_DMP_PLATFORM ++ if(sz > 0x4000) ++ pbuf = (u8 *)dvr_malloc(sz); ++ else ++#endif ++ pbuf = kmalloc(sz,in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ pbuf = malloc(sz,M_DEVBUF,M_NOWAIT); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG); ++ ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++#ifdef PLATFORM_LINUX ++ if ( pbuf != NULL) { ++ atomic_inc(&_malloc_cnt); ++ atomic_add(sz, &_malloc_size); ++ } ++#endif ++#endif /* DBG_MEMORY_LEAK */ ++ ++ return pbuf; ++ ++} ++ ++ ++u8* _rtw_zmalloc(u32 sz) ++{ ++#ifdef PLATFORM_FREEBSD ++ return malloc(sz,M_DEVBUF,M_ZERO|M_NOWAIT); ++#else // PLATFORM_FREEBSD ++ u8 *pbuf = _rtw_malloc(sz); ++ ++ if (pbuf != NULL) { ++ ++#ifdef PLATFORM_LINUX ++ memset(pbuf, 0, sz); ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ NdisFillMemory(pbuf, sz, 0); ++#endif ++ ++ } ++ ++ return pbuf; ++#endif // PLATFORM_FREEBSD ++} ++ ++void _rtw_mfree(u8 *pbuf, u32 sz) ++{ ++ ++#ifdef PLATFORM_LINUX ++#ifdef RTK_DMP_PLATFORM ++ if(sz > 0x4000) ++ dvr_free(pbuf); ++ else ++#endif ++ kfree(pbuf); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ free(pbuf,M_DEVBUF); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisFreeMemory(pbuf,sz, 0); ++ ++#endif ++ ++#ifdef DBG_MEMORY_LEAK ++#ifdef PLATFORM_LINUX ++ atomic_dec(&_malloc_cnt); ++ atomic_sub(sz, &_malloc_size); ++#endif ++#endif /* DBG_MEMORY_LEAK */ ++ ++} ++ ++#ifdef PLATFORM_FREEBSD ++//review again ++struct sk_buff * dev_alloc_skb(unsigned int size) ++{ ++ struct sk_buff *skb=NULL; ++ u8 *data=NULL; ++ ++ //skb = (struct sk_buff *)_rtw_zmalloc(sizeof(struct sk_buff)); // for skb->len, etc. ++ skb = (struct sk_buff *)_rtw_malloc(sizeof(struct sk_buff)); ++ if(!skb) ++ goto out; ++ data = _rtw_malloc(size); ++ if(!data) ++ goto nodata; ++ ++ skb->head = (unsigned char*)data; ++ skb->data = (unsigned char*)data; ++ skb->tail = (unsigned char*)data; ++ skb->end = (unsigned char*)data + size; ++ skb->len = 0; ++ //printf("%s()-%d: skb=%p, skb->head = %p\n", __FUNCTION__, __LINE__, skb, skb->head); ++ ++out: ++ return skb; ++nodata: ++ _rtw_mfree((u8 *)skb, sizeof(struct sk_buff)); ++ skb = NULL; ++goto out; ++ ++} ++ ++void dev_kfree_skb_any(struct sk_buff *skb) ++{ ++ //printf("%s()-%d: skb->head = %p\n", __FUNCTION__, __LINE__, skb->head); ++ if(skb->head) ++ _rtw_mfree(skb->head, 0); ++ //printf("%s()-%d: skb = %p\n", __FUNCTION__, __LINE__, skb); ++ if(skb) ++ _rtw_mfree((u8 *)skb, 0); ++} ++struct sk_buff *skb_clone(const struct sk_buff *skb) ++{ ++ return NULL; ++} ++ ++#endif /* PLATFORM_FREEBSD */ ++ ++inline struct sk_buff *_rtw_skb_alloc(u32 sz) ++{ ++#ifdef PLATFORM_LINUX ++ return __dev_alloc_skb(sz, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ return dev_alloc_skb(sz); ++#endif /* PLATFORM_FREEBSD */ ++} ++ ++inline void _rtw_skb_free(struct sk_buff *skb) ++{ ++ dev_kfree_skb_any(skb); ++} ++ ++inline struct sk_buff *_rtw_skb_copy(const struct sk_buff *skb) ++{ ++#ifdef PLATFORM_LINUX ++ return skb_copy(skb, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ return NULL; ++#endif /* PLATFORM_FREEBSD */ ++} ++ ++inline struct sk_buff *_rtw_skb_clone(struct sk_buff *skb) ++{ ++#ifdef PLATFORM_LINUX ++ return skb_clone(skb, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ return skb_clone(skb); ++#endif /* PLATFORM_FREEBSD */ ++} ++ ++inline int _rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb) ++{ ++#ifdef PLATFORM_LINUX ++ skb->dev = ndev; ++ return netif_rx(skb); ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ return (*ndev->if_input)(ndev, skb); ++#endif /* PLATFORM_FREEBSD */ ++} ++ ++void _rtw_skb_queue_purge(struct sk_buff_head *list) ++{ ++ struct sk_buff *skb; ++ ++ while ((skb = skb_dequeue(list)) != NULL) ++ _rtw_skb_free(skb); ++} ++ ++#ifdef CONFIG_USB_HCI ++inline void *_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma) ++{ ++#ifdef PLATFORM_LINUX ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ return usb_alloc_coherent(dev, size, (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL), dma); ++#else ++ return usb_buffer_alloc(dev, size, (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL), dma); ++#endif ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ return (malloc(size, M_USBDEV, M_NOWAIT | M_ZERO)); ++#endif /* PLATFORM_FREEBSD */ ++} ++inline void _rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma) ++{ ++#ifdef PLATFORM_LINUX ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ usb_free_coherent(dev, size, addr, dma); ++#else ++ usb_buffer_free(dev, size, addr, dma); ++#endif ++#endif /* PLATFORM_LINUX */ ++ ++#ifdef PLATFORM_FREEBSD ++ free(addr, M_USBDEV); ++#endif /* PLATFORM_FREEBSD */ ++} ++#endif /* CONFIG_USB_HCI */ ++ ++#ifdef DBG_MEM_ALLOC ++ ++struct rtw_mem_stat { ++ ATOMIC_T alloc; // the memory bytes we allocate currently ++ ATOMIC_T peak; // the peak memory bytes we allocate ++ ATOMIC_T alloc_cnt; // the alloc count for alloc currently ++ ATOMIC_T alloc_err_cnt; // the error times we fail to allocate memory ++}; ++ ++struct rtw_mem_stat rtw_mem_type_stat[mstat_tf_idx(MSTAT_TYPE_MAX)]; ++struct rtw_mem_stat rtw_mem_func_stat[mstat_ff_idx(MSTAT_FUNC_MAX)]; ++ ++char *MSTAT_TYPE_str[] = { ++ "VIR", ++ "PHY", ++ "SKB", ++ "USB", ++}; ++ ++char *MSTAT_FUNC_str[] = { ++ "UNSP", ++ "IO", ++ "TXIO", ++ "RXIO", ++ "TX", ++ "RX", ++}; ++ ++int _rtw_mstat_dump(char *buf, int len) ++{ ++ int cnt = 0; ++ int i; ++ int value_t[4][mstat_tf_idx(MSTAT_TYPE_MAX)]; ++ int value_f[4][mstat_ff_idx(MSTAT_FUNC_MAX)]; ++ ++ int vir_alloc, vir_peak, vir_alloc_err, phy_alloc, phy_peak, phy_alloc_err; ++ int tx_alloc, tx_peak, tx_alloc_err, rx_alloc, rx_peak, rx_alloc_err; ++ ++ for(i=0;i 5000) { ++ // rtw_mstat_dump(); ++ update_time=rtw_get_current_time(); ++ //} ++} ++ ++ ++ ++inline u8* dbg_rtw_vmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ u8 *p; ++ //DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ p=_rtw_vmalloc((sz)); ++ ++ rtw_mstat_update( ++ flags ++ , p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , sz ++ ); ++ ++ return p; ++} ++ ++inline u8* dbg_rtw_zvmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ u8 *p; ++ //DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ p=_rtw_zvmalloc((sz)); ++ ++ rtw_mstat_update( ++ flags ++ , p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , sz ++ ); ++ ++ return p; ++} ++ ++inline void dbg_rtw_vmfree(u8 *pbuf, u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ //DBG_871X("DBG_MEM_ALLOC %s:%d %s(%p,%d)\n", func, line, __FUNCTION__, (pbuf), (sz)); ++ ++ _rtw_vmfree((pbuf), (sz)); ++ ++ rtw_mstat_update( ++ flags ++ , MSTAT_FREE ++ , sz ++ ); ++} ++ ++inline u8* dbg_rtw_malloc(u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ u8 *p; ++ ++ //if(sz>=153 && sz<=306) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ //if((sz)>4096) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ p=_rtw_malloc((sz)); ++ ++ rtw_mstat_update( ++ flags ++ , p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , sz ++ ); ++ ++ return p; ++} ++ ++inline u8* dbg_rtw_zmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ u8 *p; ++ ++ //if(sz>=153 && sz<=306) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ //if((sz)>4096) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ p = _rtw_zmalloc((sz)); ++ ++ rtw_mstat_update( ++ flags ++ , p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , sz ++ ); ++ ++ return p; ++} ++ ++inline void dbg_rtw_mfree(u8 *pbuf, u32 sz, const enum mstat_f flags, const char *func, const int line) ++{ ++ //if(sz>=153 && sz<=306) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); ++ ++ //if((sz)>4096) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s(%p,%d)\n", func, line, __FUNCTION__, (pbuf), (sz)); ++ ++ _rtw_mfree((pbuf), (sz)); ++ ++ rtw_mstat_update( ++ flags ++ , MSTAT_FREE ++ , sz ++ ); ++} ++ ++inline struct sk_buff * dbg_rtw_skb_alloc(unsigned int size, const enum mstat_f flags, const char *func, int line) ++{ ++ struct sk_buff *skb; ++ unsigned int truesize = 0; ++ ++ skb = _rtw_skb_alloc(size); ++ ++ if(skb) ++ truesize = skb->truesize; ++ ++ if(!skb || truesize < size /*|| size > 4096*/) ++ DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d), skb:%p, truesize=%u\n", func, line, __FUNCTION__, size, skb, truesize); ++ ++ rtw_mstat_update( ++ flags ++ , skb ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , truesize ++ ); ++ ++ return skb; ++} ++ ++inline void dbg_rtw_skb_free(struct sk_buff *skb, const enum mstat_f flags, const char *func, int line) ++{ ++ unsigned int truesize = skb->truesize; ++ ++ //if(truesize > 4096) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s, truesize=%u\n", func, line, __FUNCTION__, truesize); ++ ++ _rtw_skb_free(skb); ++ ++ rtw_mstat_update( ++ flags ++ , MSTAT_FREE ++ , truesize ++ ); ++} ++ ++inline struct sk_buff *dbg_rtw_skb_copy(const struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line) ++{ ++ struct sk_buff *skb_cp; ++ unsigned int truesize = skb->truesize; ++ unsigned int cp_truesize = 0; ++ ++ skb_cp = _rtw_skb_copy(skb); ++ if(skb_cp) ++ cp_truesize = skb_cp->truesize; ++ ++ if(!skb_cp || cp_truesize != truesize /*||cp_truesize > 4096*/) ++ DBG_871X("DBG_MEM_ALLOC %s:%d %s(%u), skb_cp:%p, cp_truesize=%u\n", func, line, __FUNCTION__, truesize, skb_cp, cp_truesize); ++ ++ rtw_mstat_update( ++ flags ++ , skb_cp ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , truesize ++ ); ++ ++ return skb_cp; ++} ++ ++inline struct sk_buff *dbg_rtw_skb_clone(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line) ++{ ++ struct sk_buff *skb_cl; ++ unsigned int truesize = skb->truesize; ++ unsigned int cl_truesize = 0; ++ ++ skb_cl = _rtw_skb_clone(skb); ++ if(skb_cl) ++ cl_truesize = skb_cl->truesize; ++ ++ if(!skb_cl || cl_truesize != truesize /*|| cl_truesize > 4096*/) ++ DBG_871X("DBG_MEM_ALLOC %s:%d %s(%u), skb_cl:%p, cl_truesize=%u\n", func, line, __FUNCTION__, truesize, skb_cl, cl_truesize); ++ ++ rtw_mstat_update( ++ flags ++ , skb_cl ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , truesize ++ ); ++ ++ return skb_cl; ++} ++ ++inline int dbg_rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb, const enum mstat_f flags, const char *func, int line) ++{ ++ int ret; ++ unsigned int truesize = skb->truesize; ++ ++ //if(truesize > 4096) ++ // DBG_871X("DBG_MEM_ALLOC %s:%d %s, truesize=%u\n", func, line, __FUNCTION__, truesize); ++ ++ ret = _rtw_netif_rx(ndev, skb); ++ ++ rtw_mstat_update( ++ flags ++ , MSTAT_FREE ++ , truesize ++ ); ++ ++ return ret; ++} ++ ++inline void dbg_rtw_skb_queue_purge(struct sk_buff_head *list, enum mstat_f flags, const char *func, int line) ++{ ++ struct sk_buff *skb; ++ ++ while ((skb = skb_dequeue(list)) != NULL) ++ dbg_rtw_skb_free(skb, flags, func, line); ++} ++ ++#ifdef CONFIG_USB_HCI ++inline void *dbg_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma, const enum mstat_f flags, const char *func, int line) ++{ ++ void *p; ++ //DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, size); ++ ++ p = _rtw_usb_buffer_alloc(dev, size, dma); ++ ++ rtw_mstat_update( ++ flags ++ , p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL ++ , size ++ ); ++ ++ return p; ++} ++ ++inline void dbg_rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma, const enum mstat_f flags, const char *func, int line) ++{ ++ //DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, size); ++ ++ _rtw_usb_buffer_free(dev, size, addr, dma); ++ ++ rtw_mstat_update( ++ flags ++ , MSTAT_FREE ++ , size ++ ); ++} ++#endif /* CONFIG_USB_HCI */ ++#endif /* DBG_MEM_ALLOC */ ++ ++void* rtw_malloc2d(int h, int w, int size) ++{ ++ int j; ++ ++ void **a = (void **) rtw_zmalloc( h*sizeof(void *) + h*w*size ); ++ if(a == NULL) ++ { ++ DBG_871X("%s: alloc memory fail!\n", __FUNCTION__); ++ return NULL; ++ } ++ ++ for( j=0; jprev = pnew; ++ pnew->next = pnext; ++ pnew->prev = pprev; ++ pprev->next = pnew; ++} ++#endif /* PLATFORM_FREEBSD */ ++ ++void _rtw_init_listhead(_list *list) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ INIT_LIST_HEAD(list); ++ ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ list->next = list; ++ list->prev = list; ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisInitializeListHead(list); ++ ++#endif ++ ++} ++ ++ ++/* ++For the following list_xxx operations, ++caller must guarantee the atomic context. ++Otherwise, there will be racing condition. ++*/ ++u32 rtw_is_list_empty(_list *phead) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ if (list_empty(phead)) ++ return _TRUE; ++ else ++ return _FALSE; ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ ++ if (phead->next == phead) ++ return _TRUE; ++ else ++ return _FALSE; ++ ++#endif ++ ++ ++#ifdef PLATFORM_WINDOWS ++ ++ if (IsListEmpty(phead)) ++ return _TRUE; ++ else ++ return _FALSE; ++ ++#endif ++ ++ ++} ++ ++void rtw_list_insert_head(_list *plist, _list *phead) ++{ ++ ++#ifdef PLATFORM_LINUX ++ list_add(plist, phead); ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ __list_add(plist, phead, phead->next); ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ InsertHeadList(phead, plist); ++#endif ++} ++ ++void rtw_list_insert_tail(_list *plist, _list *phead) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ list_add_tail(plist, phead); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ ++ __list_add(plist, phead->prev, phead); ++ ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ InsertTailList(phead, plist); ++ ++#endif ++ ++} ++ ++ ++/* ++ ++Caller must check if the list is empty before calling rtw_list_delete ++ ++*/ ++ ++ ++void _rtw_init_sema(_sema *sema, int init_val) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ sema_init(sema, init_val); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ sema_init(sema, init_val, "rtw_drv"); ++#endif ++#ifdef PLATFORM_OS_XP ++ ++ KeInitializeSemaphore(sema, init_val, SEMA_UPBND); // count=0; ++ ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ if(*sema == NULL) ++ *sema = CreateSemaphore(NULL, init_val, SEMA_UPBND, NULL); ++#endif ++ ++} ++ ++void _rtw_free_sema(_sema *sema) ++{ ++#ifdef PLATFORM_FREEBSD ++ sema_destroy(sema); ++#endif ++#ifdef PLATFORM_OS_CE ++ CloseHandle(*sema); ++#endif ++ ++} ++ ++void _rtw_up_sema(_sema *sema) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ up(sema); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ sema_post(sema); ++#endif ++#ifdef PLATFORM_OS_XP ++ ++ KeReleaseSemaphore(sema, IO_NETWORK_INCREMENT, 1, FALSE ); ++ ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ ReleaseSemaphore(*sema, 1, NULL ); ++#endif ++} ++ ++u32 _rtw_down_sema(_sema *sema) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ if (down_interruptible(sema)) ++ return _FAIL; ++ else ++ return _SUCCESS; ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ sema_wait(sema); ++ return _SUCCESS; ++#endif ++#ifdef PLATFORM_OS_XP ++ ++ if(STATUS_SUCCESS == KeWaitForSingleObject(sema, Executive, KernelMode, TRUE, NULL)) ++ return _SUCCESS; ++ else ++ return _FAIL; ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ if(WAIT_OBJECT_0 == WaitForSingleObject(*sema, INFINITE )) ++ return _SUCCESS; ++ else ++ return _FAIL; ++#endif ++} ++ ++ ++ ++void _rtw_mutex_init(_mutex *pmutex) ++{ ++#ifdef PLATFORM_LINUX ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ mutex_init(pmutex); ++#else ++ init_MUTEX(pmutex); ++#endif ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_init(pmutex, "", NULL, MTX_DEF|MTX_RECURSE); ++#endif ++#ifdef PLATFORM_OS_XP ++ ++ KeInitializeMutex(pmutex, 0); ++ ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ *pmutex = CreateMutex( NULL, _FALSE, NULL); ++#endif ++} ++ ++void _rtw_mutex_free(_mutex *pmutex); ++void _rtw_mutex_free(_mutex *pmutex) ++{ ++#ifdef PLATFORM_LINUX ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) ++ mutex_destroy(pmutex); ++#else ++#endif ++ ++#ifdef PLATFORM_FREEBSD ++ sema_destroy(pmutex); ++#endif ++ ++#endif ++ ++#ifdef PLATFORM_OS_XP ++ ++#endif ++ ++#ifdef PLATFORM_OS_CE ++ ++#endif ++} ++ ++void _rtw_spinlock_init(_lock *plock) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ spin_lock_init(plock); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_init(plock, "", NULL, MTX_DEF|MTX_RECURSE); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisAllocateSpinLock(plock); ++ ++#endif ++ ++} ++ ++void _rtw_spinlock_free(_lock *plock) ++{ ++#ifdef PLATFORM_FREEBSD ++ mtx_destroy(plock); ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++ NdisFreeSpinLock(plock); ++ ++#endif ++ ++} ++#ifdef PLATFORM_FREEBSD ++extern PADAPTER prtw_lock; ++ ++void rtw_mtx_lock(_lock *plock){ ++ if(prtw_lock){ ++ mtx_lock(&prtw_lock->glock); ++ } ++ else{ ++ printf("%s prtw_lock==NULL",__FUNCTION__); ++ } ++} ++void rtw_mtx_unlock(_lock *plock){ ++ if(prtw_lock){ ++ mtx_unlock(&prtw_lock->glock); ++ } ++ else{ ++ printf("%s prtw_lock==NULL",__FUNCTION__); ++ } ++ ++} ++#endif //PLATFORM_FREEBSD ++ ++ ++void _rtw_spinlock(_lock *plock) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ spin_lock(plock); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_lock(plock); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisAcquireSpinLock(plock); ++ ++#endif ++ ++} ++ ++void _rtw_spinunlock(_lock *plock) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ spin_unlock(plock); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_unlock(plock); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisReleaseSpinLock(plock); ++ ++#endif ++} ++ ++ ++void _rtw_spinlock_ex(_lock *plock) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ spin_lock(plock); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_lock(plock); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisDprAcquireSpinLock(plock); ++ ++#endif ++ ++} ++ ++void _rtw_spinunlock_ex(_lock *plock) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ spin_unlock(plock); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ mtx_unlock(plock); ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisDprReleaseSpinLock(plock); ++ ++#endif ++} ++ ++ ++ ++void _rtw_init_queue(_queue *pqueue) ++{ ++ ++ _rtw_init_listhead(&(pqueue->queue)); ++ ++ _rtw_spinlock_init(&(pqueue->lock)); ++ ++} ++ ++u32 _rtw_queue_empty(_queue *pqueue) ++{ ++ return (rtw_is_list_empty(&(pqueue->queue))); ++} ++ ++ ++u32 rtw_end_of_queue_search(_list *head, _list *plist) ++{ ++ if (head == plist) ++ return _TRUE; ++ else ++ return _FALSE; ++} ++ ++ ++u32 rtw_get_current_time(void) ++{ ++ ++#ifdef PLATFORM_LINUX ++ return jiffies; ++#endif ++#ifdef PLATFORM_FREEBSD ++ struct timeval tvp; ++ getmicrotime(&tvp); ++ return tvp.tv_sec; ++#endif ++#ifdef PLATFORM_WINDOWS ++ LARGE_INTEGER SystemTime; ++ NdisGetCurrentSystemTime(&SystemTime); ++ return (u32)(SystemTime.LowPart);// count of 100-nanosecond intervals ++#endif ++} ++ ++inline u32 rtw_systime_to_ms(u32 systime) ++{ ++#ifdef PLATFORM_LINUX ++ return systime * 1000 / HZ; ++#endif ++#ifdef PLATFORM_FREEBSD ++ return systime * 1000; ++#endif ++#ifdef PLATFORM_WINDOWS ++ return systime / 10000 ; ++#endif ++} ++ ++inline u32 rtw_ms_to_systime(u32 ms) ++{ ++#ifdef PLATFORM_LINUX ++ return ms * HZ / 1000; ++#endif ++#ifdef PLATFORM_FREEBSD ++ return ms /1000; ++#endif ++#ifdef PLATFORM_WINDOWS ++ return ms * 10000 ; ++#endif ++} ++ ++// the input parameter start use the same unit as returned by rtw_get_current_time ++inline s32 rtw_get_passing_time_ms(u32 start) ++{ ++#ifdef PLATFORM_LINUX ++ return rtw_systime_to_ms(jiffies-start); ++#endif ++#ifdef PLATFORM_FREEBSD ++ return rtw_systime_to_ms(rtw_get_current_time()); ++#endif ++#ifdef PLATFORM_WINDOWS ++ LARGE_INTEGER SystemTime; ++ NdisGetCurrentSystemTime(&SystemTime); ++ return rtw_systime_to_ms((u32)(SystemTime.LowPart) - start) ; ++#endif ++} ++ ++inline s32 rtw_get_time_interval_ms(u32 start, u32 end) ++{ ++#ifdef PLATFORM_LINUX ++ return rtw_systime_to_ms(end-start); ++#endif ++#ifdef PLATFORM_FREEBSD ++ return rtw_systime_to_ms(rtw_get_current_time()); ++#endif ++#ifdef PLATFORM_WINDOWS ++ return rtw_systime_to_ms(end-start); ++#endif ++} ++ ++ ++void rtw_sleep_schedulable(int ms) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ u32 delta; ++ ++ delta = (ms * HZ)/1000;//(ms) ++ if (delta == 0) { ++ delta = 1;// 1 ms ++ } ++ set_current_state(TASK_INTERRUPTIBLE); ++ if (schedule_timeout(delta) != 0) { ++ return ; ++ } ++ return; ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ DELAY(ms*1000); ++ return ; ++#endif ++ ++#ifdef PLATFORM_WINDOWS ++ ++ NdisMSleep(ms*1000); //(us)*1000=(ms) ++ ++#endif ++ ++} ++ ++ ++void rtw_msleep_os(int ms) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ msleep((unsigned int)ms); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ //Delay for delay microseconds ++ DELAY(ms*1000); ++ return ; ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisMSleep(ms*1000); //(us)*1000=(ms) ++ ++#endif ++ ++ ++} ++void rtw_usleep_os(int us) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ // msleep((unsigned int)us); ++ if ( 1 < (us/1000) ) ++ msleep(1); ++ else ++ msleep( (us/1000) + 1); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ //Delay for delay microseconds ++ DELAY(us); ++ ++ return ; ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisMSleep(us); //(us) ++ ++#endif ++ ++ ++} ++ ++ ++#ifdef DBG_DELAY_OS ++void _rtw_mdelay_os(int ms, const char *func, const int line) ++{ ++ #if 0 ++ if(ms>10) ++ DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, ms); ++ rtw_msleep_os(ms); ++ return; ++ #endif ++ ++ ++ DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, ms); ++ ++#if defined(PLATFORM_LINUX) ++ ++ mdelay((unsigned long)ms); ++ ++#elif defined(PLATFORM_WINDOWS) ++ ++ NdisStallExecution(ms*1000); //(us)*1000=(ms) ++ ++#endif ++ ++ ++} ++void _rtw_udelay_os(int us, const char *func, const int line) ++{ ++ ++ #if 0 ++ if(us > 1000) { ++ DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, us); ++ rtw_usleep_os(us); ++ return; ++ } ++ #endif ++ ++ ++ DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, us); ++ ++ ++#if defined(PLATFORM_LINUX) ++ ++ udelay((unsigned long)us); ++ ++#elif defined(PLATFORM_WINDOWS) ++ ++ NdisStallExecution(us); //(us) ++ ++#endif ++ ++} ++#else ++void rtw_mdelay_os(int ms) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ mdelay((unsigned long)ms); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ DELAY(ms*1000); ++ return ; ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisStallExecution(ms*1000); //(us)*1000=(ms) ++ ++#endif ++ ++ ++} ++void rtw_udelay_os(int us) ++{ ++ ++#ifdef PLATFORM_LINUX ++ ++ udelay((unsigned long)us); ++ ++#endif ++#ifdef PLATFORM_FREEBSD ++ //Delay for delay microseconds ++ DELAY(us); ++ return ; ++#endif ++#ifdef PLATFORM_WINDOWS ++ ++ NdisStallExecution(us); //(us) ++ ++#endif ++ ++} ++#endif ++ ++void rtw_yield_os() ++{ ++#ifdef PLATFORM_LINUX ++ yield(); ++#endif ++#ifdef PLATFORM_FREEBSD ++ yield(); ++#endif ++#ifdef PLATFORM_WINDOWS ++ SwitchToThread(); ++#endif ++} ++ ++#define RTW_SUSPEND_LOCK_NAME "rtw_wifi" ++ ++#ifdef CONFIG_WAKELOCK ++static struct wake_lock rtw_suspend_lock; ++#elif defined(CONFIG_ANDROID_POWER) ++static android_suspend_lock_t rtw_suspend_lock ={ ++ .name = RTW_SUSPEND_LOCK_NAME ++}; ++#endif ++ ++inline void rtw_suspend_lock_init() ++{ ++ #ifdef CONFIG_WAKELOCK ++ wake_lock_init(&rtw_suspend_lock, WAKE_LOCK_SUSPEND, RTW_SUSPEND_LOCK_NAME); ++ #elif defined(CONFIG_ANDROID_POWER) ++ android_init_suspend_lock(&rtw_suspend_lock); ++ #endif ++} ++ ++inline void rtw_suspend_lock_uninit() ++{ ++ #ifdef CONFIG_WAKELOCK ++ wake_lock_destroy(&rtw_suspend_lock); ++ #elif defined(CONFIG_ANDROID_POWER) ++ android_uninit_suspend_lock(&rtw_suspend_lock); ++ #endif ++} ++ ++inline void rtw_lock_suspend() ++{ ++ #ifdef CONFIG_WAKELOCK ++ wake_lock(&rtw_suspend_lock); ++ #elif defined(CONFIG_ANDROID_POWER) ++ android_lock_suspend(&rtw_suspend_lock); ++ #endif ++} ++ ++inline void rtw_unlock_suspend() ++{ ++ #ifdef CONFIG_WAKELOCK ++ wake_unlock(&rtw_suspend_lock); ++ #elif defined(CONFIG_ANDROID_POWER) ++ android_unlock_suspend(&rtw_suspend_lock); ++ #endif ++} ++ ++inline void rtw_lock_suspend_timeout(u32 timeout_ms) ++{ ++ #ifdef CONFIG_WAKELOCK ++ wake_lock_timeout(&rtw_suspend_lock, rtw_ms_to_systime(timeout_ms)); ++ #elif defined(CONFIG_ANDROID_POWER) ++ android_lock_suspend_auto_expire(&rtw_suspend_lock, rtw_ms_to_systime(timeout_ms)); ++ #endif ++} ++ ++inline void ATOMIC_SET(ATOMIC_T *v, int i) ++{ ++ #ifdef PLATFORM_LINUX ++ atomic_set(v,i); ++ #elif defined(PLATFORM_WINDOWS) ++ *v=i;// other choice???? ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_set_int(v,i); ++ #endif ++} ++ ++inline int ATOMIC_READ(ATOMIC_T *v) ++{ ++ #ifdef PLATFORM_LINUX ++ return atomic_read(v); ++ #elif defined(PLATFORM_WINDOWS) ++ return *v; // other choice???? ++ #elif defined(PLATFORM_FREEBSD) ++ return atomic_load_acq_32(v); ++ #endif ++} ++ ++inline void ATOMIC_ADD(ATOMIC_T *v, int i) ++{ ++ #ifdef PLATFORM_LINUX ++ atomic_add(i,v); ++ #elif defined(PLATFORM_WINDOWS) ++ InterlockedAdd(v,i); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_add_int(v,i); ++ #endif ++} ++inline void ATOMIC_SUB(ATOMIC_T *v, int i) ++{ ++ #ifdef PLATFORM_LINUX ++ atomic_sub(i,v); ++ #elif defined(PLATFORM_WINDOWS) ++ InterlockedAdd(v,-i); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_subtract_int(v,i); ++ #endif ++} ++ ++inline void ATOMIC_INC(ATOMIC_T *v) ++{ ++ #ifdef PLATFORM_LINUX ++ atomic_inc(v); ++ #elif defined(PLATFORM_WINDOWS) ++ InterlockedIncrement(v); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_add_int(v,1); ++ #endif ++} ++ ++inline void ATOMIC_DEC(ATOMIC_T *v) ++{ ++ #ifdef PLATFORM_LINUX ++ atomic_dec(v); ++ #elif defined(PLATFORM_WINDOWS) ++ InterlockedDecrement(v); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_subtract_int(v,1); ++ #endif ++} ++ ++inline int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i) ++{ ++ #ifdef PLATFORM_LINUX ++ return atomic_add_return(i,v); ++ #elif defined(PLATFORM_WINDOWS) ++ return InterlockedAdd(v,i); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_add_int(v,i); ++ return atomic_load_acq_32(v); ++ #endif ++} ++ ++inline int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i) ++{ ++ #ifdef PLATFORM_LINUX ++ return atomic_sub_return(i,v); ++ #elif defined(PLATFORM_WINDOWS) ++ return InterlockedAdd(v,-i); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_subtract_int(v,i); ++ return atomic_load_acq_32(v); ++ #endif ++} ++ ++inline int ATOMIC_INC_RETURN(ATOMIC_T *v) ++{ ++ #ifdef PLATFORM_LINUX ++ return atomic_inc_return(v); ++ #elif defined(PLATFORM_WINDOWS) ++ return InterlockedIncrement(v); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_add_int(v,1); ++ return atomic_load_acq_32(v); ++ #endif ++} ++ ++inline int ATOMIC_DEC_RETURN(ATOMIC_T *v) ++{ ++ #ifdef PLATFORM_LINUX ++ return atomic_dec_return(v); ++ #elif defined(PLATFORM_WINDOWS) ++ return InterlockedDecrement(v); ++ #elif defined(PLATFORM_FREEBSD) ++ atomic_subtract_int(v,1); ++ return atomic_load_acq_32(v); ++ #endif ++} ++ ++ ++#ifdef PLATFORM_LINUX ++/* ++* Open a file with the specific @param path, @param flag, @param mode ++* @param fpp the pointer of struct file pointer to get struct file pointer while file opening is success ++* @param path the path of the file to open ++* @param flag file operation flags, please refer to linux document ++* @param mode please refer to linux document ++* @return Linux specific error code ++*/ ++static int openFile(struct file **fpp, char *path, int flag, int mode) ++{ ++ struct file *fp; ++ ++ fp=filp_open(path, flag, mode); ++ if(IS_ERR(fp)) { ++ *fpp=NULL; ++ return PTR_ERR(fp); ++ } ++ else { ++ *fpp=fp; ++ return 0; ++ } ++} ++ ++/* ++* Close the file with the specific @param fp ++* @param fp the pointer of struct file to close ++* @return always 0 ++*/ ++static int closeFile(struct file *fp) ++{ ++ filp_close(fp,NULL); ++ return 0; ++} ++ ++static int readFile(struct file *fp,char *buf,int len) ++{ ++ int rlen=0, sum=0; ++ ++ if (!fp->f_op || !fp->f_op->read) ++ return -EPERM; ++ ++ while(sumf_op->read(fp,buf+sum,len-sum, &fp->f_pos); ++ if(rlen>0) ++ sum+=rlen; ++ else if(0 != rlen) ++ return rlen; ++ else ++ break; ++ } ++ ++ return sum; ++ ++} ++ ++static int writeFile(struct file *fp,char *buf,int len) ++{ ++ int wlen=0, sum=0; ++ ++ if (!fp->f_op || !fp->f_op->write) ++ return -EPERM; ++ ++ while(sumf_op->write(fp,buf+sum,len-sum, &fp->f_pos); ++ if(wlen>0) ++ sum+=wlen; ++ else if(0 != wlen) ++ return wlen; ++ else ++ break; ++ } ++ ++ return sum; ++ ++} ++ ++/* ++* Test if the specifi @param path is a file and readable ++* @param path the path of the file to test ++* @return Linux specific error code ++*/ ++static int isFileReadable(char *path) ++{ ++ struct file *fp; ++ int ret = 0; ++ mm_segment_t oldfs; ++ char buf; ++ ++ fp=filp_open(path, O_RDONLY, 0); ++ if(IS_ERR(fp)) { ++ ret = PTR_ERR(fp); ++ } ++ else { ++ oldfs = get_fs(); set_fs(get_ds()); ++ ++ if(1!=readFile(fp, &buf, 1)) ++ ret = PTR_ERR(fp); ++ ++ set_fs(oldfs); ++ filp_close(fp,NULL); ++ } ++ return ret; ++} ++ ++/* ++* Open the file with @param path and retrive the file content into memory starting from @param buf for @param sz at most ++* @param path the path of the file to open and read ++* @param buf the starting address of the buffer to store file content ++* @param sz how many bytes to read at most ++* @return the byte we've read, or Linux specific error code ++*/ ++static int retriveFromFile(char *path, u8* buf, u32 sz) ++{ ++ int ret =-1; ++ mm_segment_t oldfs; ++ struct file *fp; ++ ++ if(path && buf) { ++ if( 0 == (ret=openFile(&fp,path, O_RDONLY, 0)) ){ ++ DBG_871X("%s openFile path:%s fp=%p\n",__FUNCTION__, path ,fp); ++ ++ oldfs = get_fs(); set_fs(get_ds()); ++ ret=readFile(fp, buf, sz); ++ set_fs(oldfs); ++ closeFile(fp); ++ ++ DBG_871X("%s readFile, ret:%d\n",__FUNCTION__, ret); ++ ++ } else { ++ DBG_871X("%s openFile path:%s Fail, ret:%d\n",__FUNCTION__, path, ret); ++ } ++ } else { ++ DBG_871X("%s NULL pointer\n",__FUNCTION__); ++ ret = -EINVAL; ++ } ++ return ret; ++} ++ ++/* ++* Open the file with @param path and wirte @param sz byte of data starting from @param buf into the file ++* @param path the path of the file to open and write ++* @param buf the starting address of the data to write into file ++* @param sz how many bytes to write at most ++* @return the byte we've written, or Linux specific error code ++*/ ++static int storeToFile(char *path, u8* buf, u32 sz) ++{ ++ int ret =0; ++ mm_segment_t oldfs; ++ struct file *fp; ++ ++ if(path && buf) { ++ if( 0 == (ret=openFile(&fp, path, O_CREAT|O_WRONLY, 0666)) ) { ++ DBG_871X("%s openFile path:%s fp=%p\n",__FUNCTION__, path ,fp); ++ ++ oldfs = get_fs(); set_fs(get_ds()); ++ ret=writeFile(fp, buf, sz); ++ set_fs(oldfs); ++ closeFile(fp); ++ ++ DBG_871X("%s writeFile, ret:%d\n",__FUNCTION__, ret); ++ ++ } else { ++ DBG_871X("%s openFile path:%s Fail, ret:%d\n",__FUNCTION__, path, ret); ++ } ++ } else { ++ DBG_871X("%s NULL pointer\n",__FUNCTION__); ++ ret = -EINVAL; ++ } ++ return ret; ++} ++#endif //PLATFORM_LINUX ++ ++/* ++* Test if the specifi @param path is a file and readable ++* @param path the path of the file to test ++* @return _TRUE or _FALSE ++*/ ++int rtw_is_file_readable(char *path) ++{ ++#ifdef PLATFORM_LINUX ++ if(isFileReadable(path) == 0) ++ return _TRUE; ++ else ++ return _FALSE; ++#else ++ //Todo... ++ return _FALSE; ++#endif ++} ++ ++/* ++* Open the file with @param path and retrive the file content into memory starting from @param buf for @param sz at most ++* @param path the path of the file to open and read ++* @param buf the starting address of the buffer to store file content ++* @param sz how many bytes to read at most ++* @return the byte we've read ++*/ ++int rtw_retrive_from_file(char *path, u8* buf, u32 sz) ++{ ++#ifdef PLATFORM_LINUX ++ int ret =retriveFromFile(path, buf, sz); ++ return ret>=0?ret:0; ++#else ++ //Todo... ++ return 0; ++#endif ++} ++ ++/* ++* Open the file with @param path and wirte @param sz byte of data starting from @param buf into the file ++* @param path the path of the file to open and write ++* @param buf the starting address of the data to write into file ++* @param sz how many bytes to write at most ++* @return the byte we've written ++*/ ++int rtw_store_to_file(char *path, u8* buf, u32 sz) ++{ ++#ifdef PLATFORM_LINUX ++ int ret =storeToFile(path, buf, sz); ++ return ret>=0?ret:0; ++#else ++ //Todo... ++ return 0; ++#endif ++} ++ ++#if 1 //#ifdef MEM_ALLOC_REFINE_ADAPTOR ++#ifdef PLATFORM_LINUX ++struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv, void *old_priv) ++{ ++ struct net_device *pnetdev; ++ struct rtw_netdev_priv_indicator *pnpi; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ pnetdev = alloc_etherdev_mq(sizeof(struct rtw_netdev_priv_indicator), 4); ++#else ++ pnetdev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator)); ++#endif ++ if (!pnetdev) ++ goto RETURN; ++ ++ pnpi = netdev_priv(pnetdev); ++ pnpi->priv=old_priv; ++ pnpi->sizeof_priv=sizeof_priv; ++ ++RETURN: ++ return pnetdev; ++} ++ ++struct net_device *rtw_alloc_etherdev(int sizeof_priv) ++{ ++ struct net_device *pnetdev; ++ struct rtw_netdev_priv_indicator *pnpi; ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) ++ pnetdev = alloc_etherdev_mq(sizeof(struct rtw_netdev_priv_indicator), 4); ++#else ++ pnetdev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator)); ++#endif ++ if (!pnetdev) ++ goto RETURN; ++ ++ pnpi = netdev_priv(pnetdev); ++ ++ pnpi->priv = rtw_zvmalloc(sizeof_priv); ++ if (!pnpi->priv) { ++ free_netdev(pnetdev); ++ pnetdev = NULL; ++ goto RETURN; ++ } ++ ++ pnpi->sizeof_priv=sizeof_priv; ++RETURN: ++ return pnetdev; ++} ++ ++void rtw_free_netdev(struct net_device * netdev) ++{ ++ struct rtw_netdev_priv_indicator *pnpi; ++ ++ if(!netdev) ++ goto RETURN; ++ ++ pnpi = netdev_priv(netdev); ++ ++ if(!pnpi->priv) ++ goto RETURN; ++ ++ rtw_vmfree(pnpi->priv, pnpi->sizeof_priv); ++ free_netdev(netdev); ++ ++RETURN: ++ return; ++} ++ ++/* ++* Jeff: this function should be called under ioctl (rtnl_lock is accquired) while ++* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ++*/ ++int rtw_change_ifname(_adapter *padapter, const char *ifname) ++{ ++ struct net_device *pnetdev; ++ struct net_device *cur_pnetdev = padapter->pnetdev; ++ struct rereg_nd_name_data *rereg_priv; ++ int ret; ++ ++ if(!padapter) ++ goto error; ++ ++ rereg_priv = &padapter->rereg_nd_name_priv; ++ ++ //free the old_pnetdev ++ if(rereg_priv->old_pnetdev) { ++ free_netdev(rereg_priv->old_pnetdev); ++ rereg_priv->old_pnetdev = NULL; ++ } ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)) ++ if(!rtnl_is_locked()) ++ unregister_netdev(cur_pnetdev); ++ else ++#endif ++ unregister_netdevice(cur_pnetdev); ++ ++ rtw_proc_remove_one(cur_pnetdev); ++ ++ rereg_priv->old_pnetdev=cur_pnetdev; ++ ++ pnetdev = rtw_init_netdev(padapter); ++ if (!pnetdev) { ++ ret = -1; ++ goto error; ++ } ++ ++ SET_NETDEV_DEV(pnetdev, dvobj_to_dev(adapter_to_dvobj(padapter))); ++ ++ rtw_init_netdev_name(pnetdev, ifname); ++ ++ _rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN); ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)) ++ if(!rtnl_is_locked()) ++ ret = register_netdev(pnetdev); ++ else ++#endif ++ ret = register_netdevice(pnetdev); ++ ++ if ( ret != 0) { ++ RT_TRACE(_module_hci_intfs_c_,_drv_err_,("register_netdev() failed\n")); ++ goto error; ++ } ++ ++ rtw_proc_init_one(pnetdev); ++ ++ return 0; ++ ++error: ++ ++ return -1; ++ ++} ++#endif ++#endif //MEM_ALLOC_REFINE_ADAPTOR ++ ++#ifdef PLATFORM_FREEBSD ++/* ++ * Copy a buffer from userspace and write into kernel address ++ * space. ++ * ++ * This emulation just calls the FreeBSD copyin function (to ++ * copy data from user space buffer into a kernel space buffer) ++ * and is designed to be used with the above io_write_wrapper. ++ * ++ * This function should return the number of bytes not copied. ++ * I.e. success results in a zero value. ++ * Negative error values are not returned. ++ */ ++unsigned long ++copy_from_user(void *to, const void *from, unsigned long n) ++{ ++ if ( copyin(from, to, n) != 0 ) { ++ /* Any errors will be treated as a failure ++ to copy any of the requested bytes */ ++ return n; ++ } ++ ++ return 0; ++} ++ ++unsigned long ++copy_to_user(void *to, const void *from, unsigned long n) ++{ ++ if ( copyout(from, to, n) != 0 ) { ++ /* Any errors will be treated as a failure ++ to copy any of the requested bytes */ ++ return n; ++ } ++ ++ return 0; ++} ++ ++ ++/* ++ * The usb_register and usb_deregister functions are used to register ++ * usb drivers with the usb subsystem. In this compatibility layer ++ * emulation a list of drivers (struct usb_driver) is maintained ++ * and is used for probing/attaching etc. ++ * ++ * usb_register and usb_deregister simply call these functions. ++ */ ++int ++usb_register(struct usb_driver *driver) ++{ ++ rtw_usb_linux_register(driver); ++ return 0; ++} ++ ++ ++int ++usb_deregister(struct usb_driver *driver) ++{ ++ rtw_usb_linux_deregister(driver); ++ return 0; ++} ++ ++void module_init_exit_wrapper(void *arg) ++{ ++ int (*func)(void) = arg; ++ func(); ++ return; ++} ++ ++#endif //PLATFORM_FREEBSD ++u64 rtw_modular64(u64 x, u64 y) ++{ ++#ifdef PLATFORM_LINUX ++ return do_div(x, y); ++#elif defined(PLATFORM_WINDOWS) ++ return (x % y); ++#elif defined(PLATFORM_FREEBSD) ++ return (x %y); ++#endif ++} ++ ++u64 rtw_division64(u64 x, u64 y) ++{ ++#ifdef PLATFORM_LINUX ++ do_div(x, y); ++ return x; ++#elif defined(PLATFORM_WINDOWS) ++ return (x / y); ++#elif defined(PLATFORM_FREEBSD) ++ return (x / y); ++#endif ++} ++ ++void rtw_buf_free(u8 **buf, u32 *buf_len) ++{ ++ u32 ori_len; ++ ++ if (!buf || !buf_len) ++ return; ++ ++ ori_len = *buf_len; ++ ++ if (*buf) { ++ u32 tmp_buf_len = *buf_len; ++ *buf_len = 0; ++ rtw_mfree(*buf, tmp_buf_len); ++ *buf = NULL; ++ } ++} ++ ++void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len) ++{ ++ u32 ori_len = 0, dup_len = 0; ++ u8 *ori = NULL; ++ u8 *dup = NULL; ++ ++ if (!buf || !buf_len) ++ return; ++ ++ if (!src || !src_len) ++ goto keep_ori; ++ ++ /* duplicate src */ ++ dup = rtw_malloc(src_len); ++ if (dup) { ++ dup_len = src_len; ++ _rtw_memcpy(dup, src, dup_len); ++ } ++ ++keep_ori: ++ ori = *buf; ++ ori_len = *buf_len; ++ ++ /* replace buf with dup */ ++ *buf_len = 0; ++ *buf = dup; ++ *buf_len = dup_len; ++ ++ /* free ori */ ++ if (ori && ori_len > 0) ++ rtw_mfree(ori, ori_len); ++} ++ ++ ++/** ++ * rtw_cbuf_full - test if cbuf is full ++ * @cbuf: pointer of struct rtw_cbuf ++ * ++ * Returns: _TRUE if cbuf is full ++ */ ++inline bool rtw_cbuf_full(struct rtw_cbuf *cbuf) ++{ ++ return (cbuf->write == cbuf->read-1)? _TRUE : _FALSE; ++} ++ ++/** ++ * rtw_cbuf_empty - test if cbuf is empty ++ * @cbuf: pointer of struct rtw_cbuf ++ * ++ * Returns: _TRUE if cbuf is empty ++ */ ++inline bool rtw_cbuf_empty(struct rtw_cbuf *cbuf) ++{ ++ return (cbuf->write == cbuf->read)? _TRUE : _FALSE; ++} ++ ++/** ++ * rtw_cbuf_push - push a pointer into cbuf ++ * @cbuf: pointer of struct rtw_cbuf ++ * @buf: pointer to push in ++ * ++ * Lock free operation, be careful of the use scheme ++ * Returns: _TRUE push success ++ */ ++bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf) ++{ ++ if (rtw_cbuf_full(cbuf)) ++ return _FAIL; ++ ++ if (0) ++ DBG_871X("%s on %u\n", __func__, cbuf->write); ++ cbuf->bufs[cbuf->write] = buf; ++ cbuf->write = (cbuf->write+1)%cbuf->size; ++ ++ return _SUCCESS; ++} ++ ++/** ++ * rtw_cbuf_pop - pop a pointer from cbuf ++ * @cbuf: pointer of struct rtw_cbuf ++ * ++ * Lock free operation, be careful of the use scheme ++ * Returns: pointer popped out ++ */ ++void *rtw_cbuf_pop(struct rtw_cbuf *cbuf) ++{ ++ void *buf; ++ if (rtw_cbuf_empty(cbuf)) ++ return NULL; ++ ++ if (0) ++ DBG_871X("%s on %u\n", __func__, cbuf->read); ++ buf = cbuf->bufs[cbuf->read]; ++ cbuf->read = (cbuf->read+1)%cbuf->size; ++ ++ return buf; ++} ++ ++/** ++ * rtw_cbuf_alloc - allocte a rtw_cbuf with given size and do initialization ++ * @size: size of pointer ++ * ++ * Returns: pointer of srtuct rtw_cbuf, NULL for allocation failure ++ */ ++struct rtw_cbuf *rtw_cbuf_alloc(u32 size) ++{ ++ struct rtw_cbuf *cbuf; ++ ++ cbuf = (struct rtw_cbuf *)rtw_malloc(sizeof(*cbuf) + sizeof(void*)*size); ++ ++ if (cbuf) { ++ cbuf->write = cbuf->read = 0; ++ cbuf->size = size; ++ } ++ ++ return cbuf; ++} ++ ++/** ++ * rtw_cbuf_free - free the given rtw_cbuf ++ * @cbuf: pointer of struct rtw_cbuf to free ++ */ ++void rtw_cbuf_free(struct rtw_cbuf *cbuf) ++{ ++ rtw_mfree((u8*)cbuf, sizeof(*cbuf) + sizeof(void*)*cbuf->size); ++} +diff --git a/drivers/net/wireless/realtek/rtl8192cu/runwpa b/drivers/net/wireless/realtek/rtl8192cu/runwpa +new file mode 100755 +index 000000000000..17616d8326d5 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/runwpa +@@ -0,0 +1,18 @@ ++#!/bin/bash ++ ++if [ "`which iwconfig`" = "" ] ; then ++ echo "WARNING:Wireless tool not exist!" ++ echo " Please install it!" ++ exit ++else ++ if [ `uname -r | cut -d. -f2` -eq 4 ]; then ++ wpa_supplicant -D ipw -c wpa1.conf -i wlan0 ++ else ++ if [ `iwconfig -v |awk '{print $4}' | head -n 1` -lt 18 ] ; then ++ wpa_supplicant -D ipw -c wpa1.conf -i wlan0 ++ else ++ wpa_supplicant -D wext -c wpa1.conf -i wlan0 ++ fi ++ ++ fi ++fi +diff --git a/drivers/net/wireless/realtek/rtl8192cu/wlan0dhcp b/drivers/net/wireless/realtek/rtl8192cu/wlan0dhcp +new file mode 100755 +index 000000000000..24ab3720bef6 +--- /dev/null ++++ b/drivers/net/wireless/realtek/rtl8192cu/wlan0dhcp +@@ -0,0 +1,15 @@ ++#!/bin/bash ++ ++var0=`ps aux|awk '/dhclient wlan0/'|awk '$11!="awk"{print $2}'` ++ ++kill $var0 ++cp ifcfg-wlan0 /etc/sysconfig/network-scripts/ ++ ++dhclient wlan0 ++ ++var1=`ifconfig wlan0 |awk '/inet/{print $2}'|awk -F: '{print $2}'` ++ ++ ++rm -f /etc/sysconfig/network-scripts/ifcfg-wlan0 ++ ++echo "get ip: $var1" diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1088_74fba9ff245e4a727c1332ea6d36c8b1d6406b5d.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1088_74fba9ff245e4a727c1332ea6d36c8b1d6406b5d.patch --- linux-4.9.13/debian/patches/rpi/rpi_1088_74fba9ff245e4a727c1332ea6d36c8b1d6406b5d.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1088_74fba9ff245e4a727c1332ea6d36c8b1d6406b5d.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1149 @@ +commit 74fba9ff245e4a727c1332ea6d36c8b1d6406b5d +Author: Phil Elwell +Date: Wed Mar 23 17:20:58 2016 +0000 + + net: Fix rtl8192cu build errors on other platforms + + Signed-off-by: Phil Elwell + + suppress spurious messages + + Add #if for 3.14 kernel change (#87) + + Fixes compiling after changes in https://github.com/torvalds/linux/commit/f663dd9aaf9ed124f25f0f8452edf238f087ad50 and https://github.com/torvalds/linux/commit/99932d4fc03a13bb3e94938fe25458fabc8f2fc3 + + Fixes #86 + + Set dev_type to wlan + + Fixes #23 + + Tentatively added support for more 8188CUS based devices. + + Add support for more 8188CUS and 8192CUS devices + + Add ProductId for the Netgear N150 - WNA1000M + + Fixes CONFIG_CONCURRENT_MODE CONFIG_MULTI_VIR_IFACES + + Fixes compatibility with 3.13 + + Enables warning in the compiler and fixes some issues, reference => https://github.com/diederikdehaas/rtl8812AU + + Starts device in station mode instead of monitor, fixes NetworkManager issues + + Enable cfg80211 support + + Fix cfg80211 for kernel >= 4.7 + + Fixes rtl8192cu for kernel >= 4.8 + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/Makefile b/drivers/net/wireless/realtek/rtl8192cu/Makefile +index bc137ab9f261..c7f358dd5513 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/Makefile ++++ b/drivers/net/wireless/realtek/rtl8192cu/Makefile +@@ -1,12 +1,20 @@ + EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS) + EXTRA_CFLAGS += -O1 + #EXTRA_CFLAGS += -O3 +-#EXTRA_CFLAGS += -Wall +-#EXTRA_CFLAGS += -Wextra ++EXTRA_CFLAGS += -Wall ++EXTRA_CFLAGS += -Wextra + #EXTRA_CFLAGS += -Werror + #EXTRA_CFLAGS += -pedantic + #EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes + ++# The "$(call cc-option,-Wxxx)" macro only includes that option when it's ++# supported by the compiler used. It may only work on Debian systems. ++ ++# Wdate-time was added in gcc-4.9 ++EXTRA_CFLAGS += $(call cc-option,-Werror=date-time) ++# Wincompatible-pointer-types was added in gcc-5.0 ++EXTRA_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) ++ + EXTRA_CFLAGS += -Wno-unused-variable + EXTRA_CFLAGS += -Wno-unused-value + EXTRA_CFLAGS += -Wno-unused-label +@@ -14,10 +22,16 @@ EXTRA_CFLAGS += -Wno-unused-parameter + EXTRA_CFLAGS += -Wno-unused-function + EXTRA_CFLAGS += -Wno-unused + +-EXTRA_CFLAGS += -Wno-uninitialized ++# Relax some warnings from '-Wextra' so we won't get flooded with warnings ++EXTRA_CFLAGS += -Wno-sign-compare ++EXTRA_CFLAGS += -Wno-missing-field-initializers ++ ++#EXTRA_CFLAGS += -Wno-uninitialized + + EXTRA_CFLAGS += -I$(src)/include + ++EXTRA_LDFLAGS += --strip-debug ++ + CONFIG_AUTOCFG_CP = n + + CONFIG_RTL8192C = y +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c +index cd7e5f30a568..e2403d2bc325 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ap.c +@@ -210,7 +210,7 @@ void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *d + PNDIS_802_11_VARIABLE_IEs pIE; + u8 bmatch = _FALSE; + u8 *pie = pnetwork->IEs; +- u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL; ++ u8 *p=NULL, *dst_ie=NULL, *premainder_ie=NULL, *pbackup_remainder_ie=NULL; + u32 i, offset, ielen, ie_offset, remainder_ielen = 0; + + for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pnetwork->IELength;) +@@ -250,6 +250,9 @@ void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *d + dst_ie = (p+ielen); + } + ++ if(dst_ie == NULL) ++ return; ++ + if(remainder_ielen>0) + { + pbackup_remainder_ie = rtw_malloc(remainder_ielen); +@@ -357,7 +360,7 @@ void expire_timeout_chk(_adapter *padapter) + { + _irqL irqL; + _list *phead, *plist; +- u8 updated; ++ u8 updated = _FALSE; + struct sta_info *psta=NULL; + struct sta_priv *pstapriv = &padapter->stapriv; + u8 chk_alive_num = 0; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c +index cc0b97a433c5..9470d72ac6a1 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ieee80211.c +@@ -1859,7 +1859,8 @@ int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8* category, u8 *act + { + const u8 *frame_body = frame + sizeof(struct rtw_ieee80211_hdr_3addr); + u16 fc; +- u8 c, a; ++ u8 c; ++ u8 a = ACT_PUBLIC_MAX; + + fc = le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)frame)->frame_ctl); + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c +index 9d1bcf3af57a..a86fa5f99a91 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_ioctl_set.c +@@ -43,7 +43,7 @@ extern void indicate_wx_scan_complete_event(_adapter *padapter); + (addr[4] == 0xff) && (addr[5] == 0xff) ) ? _TRUE : _FALSE \ + ) + +-u8 rtw_validate_bssid(u8 *bssid) ++u8 rtw_validate_bssid(const u8 *bssid) + { + u8 ret = _TRUE; + +@@ -535,7 +535,8 @@ _func_exit_; + + } + +-u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid) ++u8 rtw_set_802_11_connect(_adapter *padapter, const u8 *bssid ++ , NDIS_802_11_SSID *ssid) + { + _irqL irqL; + u8 status = _SUCCESS; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c +index b7716ae00f7f..6ea526106fcd 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_mlme_ext.c +@@ -2454,7 +2454,7 @@ unsigned int OnDeAuth(_adapter *padapter, union recv_frame *precv_frame) + psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); + if(psta) + { +- u8 updated; ++ u8 updated = _FALSE; + + _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); + if(rtw_is_list_empty(&psta->asoc_list)==_FALSE) +@@ -2548,7 +2548,7 @@ unsigned int OnDisassoc(_adapter *padapter, union recv_frame *precv_frame) + psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe)); + if(psta) + { +- u8 updated; ++ u8 updated = _FALSE; + + _enter_critical_bh(&pstapriv->asoc_list_lock, &irqL); + if(rtw_is_list_empty(&psta->asoc_list)==_FALSE) +@@ -5663,7 +5663,7 @@ unsigned int on_action_public_p2p(union recv_frame *precv_frame) + + // Commented by Kurt 20120113 + // Get peer_dev_addr here if peer doesn't issue prov_disc frame. +- if( _rtw_memcmp(pwdinfo->rx_prov_disc_info.peerDevAddr, empty_addr, ETH_ALEN) ); ++ if( _rtw_memcmp(pwdinfo->rx_prov_disc_info.peerDevAddr, empty_addr, ETH_ALEN) ) + _rtw_memcpy(pwdinfo->rx_prov_disc_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN); + + result = process_p2p_group_negotation_req( pwdinfo, frame_body, len ); +@@ -11932,7 +11932,7 @@ u8 setkey_hdl(_adapter *padapter, u8 *pbuf) + u8 set_stakey_hdl(_adapter *padapter, u8 *pbuf) + { + u16 ctrl=0; +- u8 cam_id;//cam_entry ++ u8 cam_id=0;//cam_entry + struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; + struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); + struct set_stakey_parm *pparm = (struct set_stakey_parm *)pbuf; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c +index 8f6cad3ec3db..0fe04435bffb 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_p2p.c +@@ -4896,9 +4896,9 @@ void init_wifidirect_info( _adapter* padapter, enum P2P_ROLE role) + #endif + #ifdef CONFIG_CONCURRENT_MODE + _adapter *pbuddy_adapter = padapter->pbuddy_adapter; +- struct wifidirect_info *pbuddy_wdinfo; +- struct mlme_priv *pbuddy_mlmepriv; +- struct mlme_ext_priv *pbuddy_mlmeext; ++ struct wifidirect_info *pbuddy_wdinfo = NULL; ++ struct mlme_priv *pbuddy_mlmepriv = NULL; ++ struct mlme_ext_priv *pbuddy_mlmeext = NULL; + #endif + + pwdinfo = &padapter->wdinfo; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c +index 63aba4a4cf76..1b14673d4939 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_recv.c +@@ -3894,7 +3894,7 @@ int process_recv_indicatepkts(_adapter *padapter, union recv_frame *prframe) + + } + +-int recv_func_prehandle(_adapter *padapter, union recv_frame *rframe) ++static int recv_func_prehandle(_adapter *padapter, union recv_frame *rframe) + { + int ret = _SUCCESS; + struct rx_pkt_attrib *pattrib = &rframe->u.hdr.attrib; +@@ -3935,7 +3935,7 @@ int recv_func_prehandle(_adapter *padapter, union recv_frame *rframe) + return ret; + } + +-int recv_func_posthandle(_adapter *padapter, union recv_frame *prframe) ++static int recv_func_posthandle(_adapter *padapter, union recv_frame *prframe) + { + int ret = _SUCCESS; + union recv_frame *orig_prframe = prframe; +@@ -4107,8 +4107,7 @@ int recv_func_posthandle(_adapter *padapter, union recv_frame *prframe) + } + + +-int recv_func(_adapter *padapter, union recv_frame *rframe); +-int recv_func(_adapter *padapter, union recv_frame *rframe) ++static int recv_func(_adapter *padapter, union recv_frame *rframe) + { + int ret; + struct rx_pkt_attrib *prxattrib = &rframe->u.hdr.attrib; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c +index 4483499eb07c..23ccadfb3e8a 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_sta_mgt.c +@@ -685,7 +685,7 @@ _func_exit_; + } + + /* any station allocated can be searched by hash list */ +-struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr) ++struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, const u8 *hwaddr) + { + + _irqL irqL; +@@ -696,7 +696,7 @@ struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr) + + u32 index; + +- u8 *addr; ++ const u8 *addr; + + u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff}; + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c +index d671155f16ea..c977cd1eedef 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_wlan_util.c +@@ -853,7 +853,7 @@ void flush_all_cam_entry(_adapter *padapter) + { + struct sta_priv *pstapriv = &padapter->stapriv; + struct sta_info *psta; +- u8 cam_id;//cam_entry ++ u8 cam_id=0;//cam_entry + + psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress); + if(psta) { +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c +index fb4e6981f4ff..c0695435e499 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_xmit.c +@@ -2590,7 +2590,7 @@ struct xmit_frame *rtw_alloc_xmitframe_once(struct xmit_priv *pxmitpriv) + s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv, struct xmit_frame *pxmitframe) + { + _irqL irqL; +- _queue *queue; ++ _queue *queue = NULL; + _adapter *padapter = pxmitpriv->adapter; + _pkt *pndis_pkt = NULL; + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c +index a3cd013cf04a..7532c63ff0d8 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c +@@ -373,7 +373,7 @@ static void getTxPowerWriteValByRegulatory( + { + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; +- u8 i, chnlGroup, pwr_diff_limit[4]; ++ u8 i, chnlGroup = 0, pwr_diff_limit[4]; + u32 writeVal, customer_limit, rf; + + // +@@ -615,7 +615,7 @@ phy_RF6052_Config_ParaFile( + IN PADAPTER Adapter + ) + { +- u32 u4RegValue; ++ u32 u4RegValue=0; + u8 eRFPath; + BB_REGISTER_DEFINITION_T *pPhyReg; + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h b/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h +index dcdb512263bf..001b48f348c5 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/autoconf.h +@@ -31,10 +31,11 @@ + + #define PLATFORM_LINUX 1 + +-//#define CONFIG_IOCTL_CFG80211 1 ++#define CONFIG_IOCTL_CFG80211 1 + #ifdef CONFIG_IOCTL_CFG80211 +- //#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */ +- #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER ++ /* Indicate new sta asoc through cfg80211_new_sta */ ++ #define RTW_USE_CFG80211_STA_EVENT ++ /*#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER*/ + //#define CONFIG_DEBUG_CFG80211 1 + //#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2 + #define CONFIG_SET_SCAN_DENY_TIMER +@@ -324,7 +325,7 @@ + + //#define DBG_MEMORY_LEAK 1 + +-#define DBG_CONFIG_ERROR_DETECT ++/*#define DBG_CONFIG_ERROR_DETECT*/ + //#define DBG_CONFIG_ERROR_RESET + + //TX use 1 urb +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h b/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h +index b2b2e9711aa4..610252758582 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/ioctl_cfg80211.h +@@ -149,8 +149,15 @@ bool rtw_cfg80211_pwr_mgmt(_adapter *adapter); + #define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, buf, len, gfp) + #elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0)) + #define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, sig_dbm, buf, len, gfp) +-#else ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,12,0)) + #define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->rtw_wdev, freq, sig_dbm, buf, len, gfp) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)) ++/* 3.12 added a flags argument which is just set to zero*/ ++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) \ ++ cfg80211_rx_mgmt((adapter)->rtw_wdev, freq, sig_dbm, buf, len, 0, gfp) ++#else ++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) \ ++ cfg80211_rx_mgmt((adapter)->rtw_wdev, freq, sig_dbm, buf, len, 0) + #endif + + #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) && !defined(COMPAT_KERNEL_RELEASE) +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h +index f1511aadd9b7..578cbc95d819 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/osdep_service.h +@@ -1395,8 +1395,8 @@ void _rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_a + extern void* rtw_malloc2d(int h, int w, int size); + extern void rtw_mfree2d(void *pbuf, int h, int w, int size); + +-extern void _rtw_memcpy(void* dec, void* sour, u32 sz); +-extern int _rtw_memcmp(void *dst, void *src, u32 sz); ++extern void _rtw_memcpy(void *dec, const void *sour, u32 sz); ++extern int _rtw_memcmp(const void *dst, const void *src, u32 sz); + extern void _rtw_memset(void *pbuf, int c, u32 sz); + + extern void _rtw_init_listhead(_list *list); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h +index 9c72f70ea437..13db6231fe69 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_debug.h +@@ -313,15 +313,15 @@ extern u32 GlobalDebugLevel; + #if defined (_dbgdump) + #undef DBG_871X + // #define DBG_871X _dbgdump +- #define DBG_871X(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ #define DBG_871X(...) LOG_LEVEL(_drv_debug_ , __VA_ARGS__) + + #undef MSG_8192C + // #define MSG_8192C _dbgdump +- #define MSG_8192C(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ #define MSG_8192C(...) LOG_LEVEL(_drv_info_ , __VA_ARGS__) + + #undef DBG_8192C + // #define DBG_8192C _dbgdump +- #define DBG_8192C(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__) ++ #define DBG_8192C(...) LOG_LEVEL(_drv_debug_ , __VA_ARGS__) + + + #undef WRN_8192C +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h +index 5e21408a0e8c..225cadc6be3a 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/rtw_ioctl_set.h +@@ -63,10 +63,11 @@ u8 rtw_set_802_11_bssid_list_scan(_adapter* padapter, NDIS_802_11_SSID *pssid, i + u8 rtw_set_802_11_infrastructure_mode(_adapter * padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype); + u8 rtw_set_802_11_remove_wep(_adapter * padapter, u32 keyindex); + u8 rtw_set_802_11_ssid(_adapter * padapter, NDIS_802_11_SSID * ssid); +-u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid); ++u8 rtw_set_802_11_connect(_adapter *padapter, const u8 *bssid ++ , NDIS_802_11_SSID *ssid); + u8 rtw_set_802_11_remove_key(_adapter * padapter, NDIS_802_11_REMOVE_KEY * key); + +-u8 rtw_validate_bssid(u8 *bssid); ++u8 rtw_validate_bssid(const u8 *bssid); + u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid); + + u16 rtw_get_cur_max_rate(_adapter *adapter); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h b/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h +index e7e3dc4472aa..9cbf934fdf7f 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/sta_info.h +@@ -395,7 +395,7 @@ struct sta_priv { + }; + + +-__inline static u32 wifi_mac_hash(u8 *mac) ++__inline static u32 wifi_mac_hash(const u8 *mac) + { + u32 x; + +@@ -423,7 +423,7 @@ struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int offset) + extern struct sta_info *rtw_alloc_stainfo(struct sta_priv *pstapriv, u8 *hwaddr); + extern u32 rtw_free_stainfo(_adapter *padapter , struct sta_info *psta); + extern void rtw_free_all_stainfo(_adapter *padapter); +-extern struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr); ++extern struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, const u8 *hwaddr); + extern u32 rtw_init_bcmc_stainfo(_adapter* padapter); + extern struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter); + extern u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h b/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h +index 1ff400a6e212..c0a748811e08 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h ++++ b/drivers/net/wireless/realtek/rtl8192cu/include/wifi.h +@@ -425,7 +425,7 @@ enum WIFI_REG_DOMAIN { + (addr[4] == 0xff) && (addr[5] == 0xff) ) ? _TRUE : _FALSE \ + ) + +-__inline static int IS_MCAST(unsigned char *da) ++__inline static int IS_MCAST(const unsigned char *da) + { + if ((*da) & 0x01) + return _TRUE; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c +index 60e92b82aa23..f7db885ce32e 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c +@@ -57,7 +57,7 @@ static const u32 rtw_cipher_suites[] = { + } + + #define CHAN2G(_channel, _freq, _flags) { \ +- .band = IEEE80211_BAND_2GHZ, \ ++ .band = NL80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_channel), \ + .flags = (_flags), \ +@@ -66,7 +66,7 @@ static const u32 rtw_cipher_suites[] = { + } + + #define CHAN5G(_channel, _flags) { \ +- .band = IEEE80211_BAND_5GHZ, \ ++ .band = NL80211_BAND_5GHZ, \ + .center_freq = 5000 + (5 * (_channel)), \ + .hw_value = (_channel), \ + .flags = (_flags), \ +@@ -166,18 +166,18 @@ void rtw_5g_rates_init(struct ieee80211_rate *rates) + } + + struct ieee80211_supported_band *rtw_spt_band_alloc( +- enum ieee80211_band band ++ enum nl80211_band band + ) + { + struct ieee80211_supported_band *spt_band = NULL; + int n_channels, n_bitrates; + +- if(band == IEEE80211_BAND_2GHZ) ++ if(band == NL80211_BAND_2GHZ) + { + n_channels = RTW_2G_CHANNELS_NUM; + n_bitrates = RTW_G_RATES_NUM; + } +- else if(band == IEEE80211_BAND_5GHZ) ++ else if(band == NL80211_BAND_5GHZ) + { + n_channels = RTW_5G_CHANNELS_NUM; + n_bitrates = RTW_A_RATES_NUM; +@@ -201,12 +201,12 @@ struct ieee80211_supported_band *rtw_spt_band_alloc( + spt_band->n_channels = n_channels; + spt_band->n_bitrates = n_bitrates; + +- if(band == IEEE80211_BAND_2GHZ) ++ if(band == NL80211_BAND_2GHZ) + { + rtw_2g_channels_init(spt_band->channels); + rtw_2g_rates_init(spt_band->bitrates); + } +- else if(band == IEEE80211_BAND_5GHZ) ++ else if(band == NL80211_BAND_5GHZ) + { + rtw_5g_channels_init(spt_band->channels); + rtw_5g_rates_init(spt_band->bitrates); +@@ -221,18 +221,18 @@ struct ieee80211_supported_band *rtw_spt_band_alloc( + + void rtw_spt_band_free(struct ieee80211_supported_band *spt_band) + { +- u32 size; ++ u32 size = 0; + + if(!spt_band) + return; + +- if(spt_band->band == IEEE80211_BAND_2GHZ) ++ if(spt_band->band == NL80211_BAND_2GHZ) + { + size = sizeof(struct ieee80211_supported_band) + + sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM + + sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM; + } +- else if(spt_band->band == IEEE80211_BAND_5GHZ) ++ else if(spt_band->band == NL80211_BAND_5GHZ) + { + size = sizeof(struct ieee80211_supported_band) + + sizeof(struct ieee80211_channel)*RTW_5G_CHANNELS_NUM +@@ -301,12 +301,12 @@ static int rtw_ieee80211_channel_to_frequency(int chan, int band) + /* see 802.11 17.3.8.3.2 and Annex J + * there are overlapping channel numbers in 5GHz and 2GHz bands */ + +- if (band == IEEE80211_BAND_5GHZ) { ++ if (band == NL80211_BAND_5GHZ) { + if (chan >= 182 && chan <= 196) + return 4000 + chan * 5; + else + return 5000 + chan * 5; +- } else { /* IEEE80211_BAND_2GHZ */ ++ } else { /* NL80211_BAND_2GHZ */ + if (chan == 14) + return 2484; + else if (chan < 14) +@@ -331,7 +331,7 @@ static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnet + u8 *notify_ie; + size_t notify_ielen; + s32 notify_signal; +- u8 buf[MAX_BSSINFO_LEN], *pbuf; ++ u8 *buf, *pbuf; + size_t len,bssinf_len=0; + struct rtw_ieee80211_hdr *pwlanhdr; + unsigned short *fctrl; +@@ -391,9 +391,9 @@ static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnet + DBG_871X("%s, got sr, but ssid mismatch, to remove this bss\n", __func__); + + if (pselect_network->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, NL80211_BAND_5GHZ); + + notify_channel = ieee80211_get_channel(wiphy, freq); + pselect_bss = cfg80211_get_bss(wiphy, NULL/*notify_channel*/, +@@ -424,9 +424,9 @@ static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnet + + channel = pnetwork->network.Configuration.DSConfig; + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + notify_channel = ieee80211_get_channel(wiphy, freq); + +@@ -459,6 +459,7 @@ static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnet + DBG_8192C("notify_timestamp: %#018llx\n", notify_timestamp); + */ + ++ buf = rtw_zmalloc(MAX_BSSINFO_LEN); + pbuf = buf; + + pwlanhdr = (struct rtw_ieee80211_hdr *)pbuf; +@@ -486,6 +487,8 @@ static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnet + _rtw_memcpy(pbuf, pnetwork->network.IEs, pnetwork->network.IELength); + len += pnetwork->network.IELength; + ++ rtw_mfree(buf, MAX_BSSINFO_LEN); ++ + //#ifdef CONFIG_P2P + //if(rtw_get_p2p_ie(pnetwork->network.IEs+12, pnetwork->network.IELength-12, NULL, NULL)) + //{ +@@ -569,15 +572,19 @@ int rtw_cfg80211_check_bss(_adapter *padapter) + return _FALSE; + + if (pnetwork->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, NL80211_BAND_5GHZ); + + notify_channel = ieee80211_get_channel(padapter->rtw_wdev->wiphy, freq); + bss = cfg80211_get_bss(padapter->rtw_wdev->wiphy, notify_channel, + pnetwork->MacAddress, pnetwork->Ssid.Ssid, + pnetwork->Ssid.SsidLength, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0) + WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); ++#else ++ IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY); ++#endif + + return (bss!=NULL); + } +@@ -626,9 +633,9 @@ void rtw_cfg80211_indicate_connect(_adapter *padapter) + u16 channel = cur_network->network.Configuration.DSConfig; + + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + notify_channel = ieee80211_get_channel(wiphy, freq); + #endif +@@ -700,13 +707,16 @@ void rtw_cfg80211_indicate_disconnect(_adapter *padapter) + if (!padapter->mlmepriv.not_indic_disco) { + DBG_8192C("pwdev->sme_state(b)=%d\n", pwdev->sme_state); + +- if(pwdev->sme_state==CFG80211_SME_CONNECTING) ++ if (check_fwstate(pmlmepriv, WIFI_UNDER_LINKING)) { + cfg80211_connect_result(padapter->pnetdev, NULL, NULL, 0, NULL, 0, + WLAN_STATUS_UNSPECIFIED_FAILURE, GFP_ATOMIC/*GFP_KERNEL*/); +- else if(pwdev->sme_state==CFG80211_SME_CONNECTED) ++ } else { ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0) + cfg80211_disconnected(padapter->pnetdev, 0, NULL, 0, GFP_ATOMIC); +- //else +- //DBG_8192C("pwdev->sme_state=%d\n", pwdev->sme_state); ++#else ++ cfg80211_disconnected(padapter->pnetdev, 0, NULL, 0, false, GFP_ATOMIC); ++#endif ++ } + + DBG_8192C("pwdev->sme_state(a)=%d\n", pwdev->sme_state); + } +@@ -1549,7 +1559,7 @@ static int cfg80211_rtw_set_default_key(struct wiphy *wiphy, + + static int cfg80211_rtw_get_station(struct wiphy *wiphy, + struct net_device *ndev, +- u8 *mac, struct station_info *sinfo) ++ const u8 *mac, struct station_info *sinfo) + { + int ret = 0; + _adapter *padapter = wiphy_to_adapter(wiphy); +@@ -1589,16 +1599,32 @@ static int cfg80211_rtw_get_station(struct wiphy *wiphy, + goto exit; + } + ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0)) ++ sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); ++#else + sinfo->filled |= STATION_INFO_SIGNAL; ++#endif + sinfo->signal = translate_percentage_to_dbm(padapter->recvpriv.signal_strength); + ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0)) ++ sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); ++#else + sinfo->filled |= STATION_INFO_TX_BITRATE; ++#endif + sinfo->txrate.legacy = rtw_get_cur_max_rate(padapter); + ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0)) ++ sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS); ++#else + sinfo->filled |= STATION_INFO_RX_PACKETS; ++#endif + sinfo->rx_packets = sta_rx_data_pkts(psta); + ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0)) ++ sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS); ++#else + sinfo->filled |= STATION_INFO_TX_PACKETS; ++#endif + sinfo->tx_packets = psta->sta_stats.tx_pkts; + + } +@@ -1789,7 +1815,15 @@ void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, bool abor + } + else + { ++ #if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0)) + cfg80211_scan_done(pwdev_priv->scan_request, aborted); ++ #else ++ struct cfg80211_scan_info info = { ++ .aborted = aborted, ++ }; ++ ++ cfg80211_scan_done(pwdev_priv->scan_request, &info); ++ #endif + } + + pwdev_priv->scan_request = NULL; +@@ -2419,7 +2453,7 @@ static int rtw_cfg80211_set_key_mgt(struct security_priv *psecuritypriv, u32 key + return 0; + } + +-static int rtw_cfg80211_set_wpa_ie(_adapter *padapter, u8 *pie, size_t ielen) ++static int rtw_cfg80211_set_wpa_ie(_adapter *padapter, const u8 *pie, size_t ielen) + { + u8 *buf=NULL, *pos=NULL; + u32 left; +@@ -3089,7 +3123,9 @@ void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint f + ie_offset = _REASOCREQ_IE_OFFSET_; + + sinfo.filled = 0; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,0,0)) + sinfo.filled = STATION_INFO_ASSOC_REQ_IES; ++#endif + sinfo.assoc_req_ies = pmgmt_frame + WLAN_HDR_A3_LEN + ie_offset; + sinfo.assoc_req_ies_len = frame_len - WLAN_HDR_A3_LEN - ie_offset; + cfg80211_new_sta(ndev, GetAddr2Ptr(pmgmt_frame), &sinfo, GFP_ATOMIC); +@@ -3097,9 +3133,9 @@ void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint f + #else /* defined(RTW_USE_CFG80211_STA_EVENT) */ + channel = pmlmeext->cur_channel; + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + #ifdef COMPAT_KERNEL_RELEASE + rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); +@@ -3142,9 +3178,9 @@ void rtw_cfg80211_indicate_sta_disassoc(_adapter *padapter, unsigned char *da, u + #else /* defined(RTW_USE_CFG80211_STA_EVENT) */ + channel = pmlmeext->cur_channel; + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + pmgmt_frame = mgmt_buf; + pwlanhdr = (struct rtw_ieee80211_hdr *)pmgmt_frame; +@@ -3387,7 +3423,11 @@ static const struct net_device_ops rtw_cfg80211_monitor_if_ops = { + }; + #endif + ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0)) ++static int rtw_cfg80211_add_monitor_if(_adapter *padapter, char *name, unsigned char name_assign_type, struct net_device **ndev) ++#else + static int rtw_cfg80211_add_monitor_if(_adapter *padapter, char *name, struct net_device **ndev) ++#endif + { + int ret = 0; + struct net_device* mon_ndev = NULL; +@@ -3418,6 +3458,9 @@ static int rtw_cfg80211_add_monitor_if(_adapter *padapter, char *name, struct ne + mon_ndev->type = ARPHRD_IEEE80211_RADIOTAP; + strncpy(mon_ndev->name, name, IFNAMSIZ); + mon_ndev->name[IFNAMSIZ - 1] = 0; ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0)) ++ mon_ndev->name_assign_type = name_assign_type; ++#endif + mon_ndev->destructor = rtw_ndev_destructor; + + #if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29)) +@@ -3482,6 +3525,9 @@ static int + #else + char *name, + #endif ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0)) ++ unsigned char name_assign_type, ++#endif + enum nl80211_iftype type, u32 *flags, struct vif_params *params) + { + int ret = 0; +@@ -3499,7 +3545,11 @@ static int + ret = -ENODEV; + break; + case NL80211_IFTYPE_MONITOR: ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0)) ++ ret = rtw_cfg80211_add_monitor_if(padapter, (char *)name, name_assign_type, &ndev); ++#else + ret = rtw_cfg80211_add_monitor_if(padapter, (char *)name, &ndev); ++#endif + break; + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) +@@ -3760,7 +3810,7 @@ static int cfg80211_rtw_stop_ap(struct wiphy *wiphy, struct net_device *ndev) + #endif //(LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) + + static int cfg80211_rtw_add_station(struct wiphy *wiphy, struct net_device *ndev, +- u8 *mac, struct station_parameters *params) ++ const u8 *mac, struct station_parameters *params) + { + DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); + +@@ -3768,12 +3818,19 @@ static int cfg80211_rtw_add_station(struct wiphy *wiphy, struct net_device *ndev + } + + static int cfg80211_rtw_del_station(struct wiphy *wiphy, struct net_device *ndev, +- u8 *mac) ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)) ++ u8 *mac) { ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(4,1,0)) ++ const u8 *mac) { ++#else ++ struct station_del_parameters *params) + { ++ const u8 *mac = params->mac; ++#endif + int ret=0; + _irqL irqL; + _list *phead, *plist; +- u8 updated; ++ u8 updated = _FALSE; + struct sta_info *psta = NULL; + _adapter *padapter = (_adapter *)rtw_netdev_priv(ndev); + struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); +@@ -3859,7 +3916,7 @@ static int cfg80211_rtw_del_station(struct wiphy *wiphy, struct net_device *ndev + } + + static int cfg80211_rtw_change_station(struct wiphy *wiphy, struct net_device *ndev, +- u8 *mac, struct station_parameters *params) ++ const u8 *mac, struct station_parameters *params) + { + DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev)); + +@@ -3950,9 +4007,9 @@ void rtw_cfg80211_rx_action_p2p(_adapter *padapter, u8 *pmgmt_frame, uint frame_ + + indicate: + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) + rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); +@@ -3990,9 +4047,9 @@ void rtw_cfg80211_rx_p2p_action_public(_adapter *padapter, u8 *pmgmt_frame, uint + + indicate: + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) + rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC); +@@ -4020,9 +4077,9 @@ void rtw_cfg80211_rx_action(_adapter *adapter, u8 *frame, uint frame_len, const + DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action); + + if (channel <= RTW_CH_MAX_2G_CHANNEL) +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); + else +- freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ); ++ freq = rtw_ieee80211_channel_to_frequency(channel, NL80211_BAND_5GHZ); + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE) + rtw_cfg80211_rx_mgmt(adapter, freq, 0, frame, frame_len, GFP_ATOMIC); +@@ -4643,6 +4700,9 @@ static int cfg80211_rtw_mgmt_tx(struct wiphy *wiphy, + #else + struct net_device *ndev, + #endif ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)) ++ struct cfg80211_mgmt_tx_params *params, ++#else + struct ieee80211_channel *chan, + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE) + bool offchan, +@@ -4663,8 +4723,15 @@ static int cfg80211_rtw_mgmt_tx(struct wiphy *wiphy, + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)) + bool dont_wait_for_ack, + #endif ++#endif + u64 *cookie) + { ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)) ++ struct ieee80211_channel *chan = params->chan; ++ const u8 *buf = params->buf; ++ size_t len = params->len; ++#endif ++ + _adapter *padapter = (_adapter *)wiphy_to_adapter(wiphy); + struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev); + int ret = 0; +@@ -5199,7 +5266,7 @@ static struct cfg80211_ops rtw_cfg80211_ops = { + #endif + }; + +-static void rtw_cfg80211_init_ht_capab(struct ieee80211_sta_ht_cap *ht_cap, enum ieee80211_band band, u8 rf_type) ++static void rtw_cfg80211_init_ht_capab(struct ieee80211_sta_ht_cap *ht_cap, enum nl80211_band band, u8 rf_type) + { + + #define MAX_BIT_RATE_40MHZ_MCS15 300 /* Mbps */ +@@ -5223,7 +5290,7 @@ static void rtw_cfg80211_init_ht_capab(struct ieee80211_sta_ht_cap *ht_cap, enum + ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + + /* +- *hw->wiphy->bands[IEEE80211_BAND_2GHZ] ++ *hw->wiphy->bands[NL80211_BAND_2GHZ] + *base on ant_num + *rx_mask: RX mask + *if rx_ant =1 rx_mask[0]=0xff;==>MCS0-MCS7 +@@ -5268,16 +5335,16 @@ void rtw_cfg80211_init_wiphy(_adapter *padapter) + + /* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */ + { +- bands = wiphy->bands[IEEE80211_BAND_2GHZ]; ++ bands = wiphy->bands[NL80211_BAND_2GHZ]; + if(bands) +- rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_2GHZ, rf_type); ++ rtw_cfg80211_init_ht_capab(&bands->ht_cap, NL80211_BAND_2GHZ, rf_type); + } + + /* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */ + { +- bands = wiphy->bands[IEEE80211_BAND_5GHZ]; ++ bands = wiphy->bands[NL80211_BAND_5GHZ]; + if(bands) +- rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_5GHZ, rf_type); ++ rtw_cfg80211_init_ht_capab(&bands->ht_cap, NL80211_BAND_5GHZ, rf_type); + } + } + +@@ -5348,9 +5415,9 @@ static void rtw_cfg80211_preinit_wiphy(_adapter *padapter, struct wiphy *wiphy) + wiphy->n_cipher_suites = ARRAY_SIZE(rtw_cipher_suites); + + /* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */ +- wiphy->bands[IEEE80211_BAND_2GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_2GHZ); ++ wiphy->bands[NL80211_BAND_2GHZ] = rtw_spt_band_alloc(NL80211_BAND_2GHZ); + /* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */ +- wiphy->bands[IEEE80211_BAND_5GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_5GHZ); ++ wiphy->bands[NL80211_BAND_5GHZ] = rtw_spt_band_alloc(NL80211_BAND_5GHZ); + + #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) && LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)) + wiphy->flags |= WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS; +@@ -5402,8 +5469,11 @@ int rtw_wdev_alloc(_adapter *padapter, struct device *dev) + } + wdev->wiphy = wiphy; + wdev->netdev = pnetdev; +- //wdev->iftype = NL80211_IFTYPE_STATION; +- wdev->iftype = NL80211_IFTYPE_MONITOR; // for rtw_setopmode_cmd() in cfg80211_rtw_change_iface() ++ ++ wdev->iftype = NL80211_IFTYPE_STATION; // will be init in rtw_hal_init() ++ // Must sync with _rtw_init_mlme_priv() ++ // pmlmepriv->fw_state = WIFI_STATION_STATE ++ //wdev->iftype = NL80211_IFTYPE_MONITOR; // for rtw_setopmode_cmd() in cfg80211_rtw_change_iface() + padapter->rtw_wdev = wdev; + pnetdev->ieee80211_ptr = wdev; + +@@ -5456,8 +5526,8 @@ void rtw_wdev_free(struct wireless_dev *wdev) + + pwdev_priv = wdev_to_priv(wdev); + +- rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_2GHZ]); +- rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_5GHZ]); ++ rtw_spt_band_free(wdev->wiphy->bands[NL80211_BAND_2GHZ]); ++ rtw_spt_band_free(wdev->wiphy->bands[NL80211_BAND_5GHZ]); + + wiphy_free(wdev->wiphy); + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c +index 865f57f222e2..1413b27edeee 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_linux.c +@@ -6584,7 +6584,6 @@ static int rtw_dbg_port(struct net_device *dev, + case 0x01: //dbg mode + padapter->recvpriv.is_signal_dbg = 1; + extra_arg = extra_arg>100?100:extra_arg; +- extra_arg = extra_arg<0?0:extra_arg; + padapter->recvpriv.signal_strength_dbg=extra_arg; + break; + } +@@ -6956,7 +6955,7 @@ static int rtw_dbg_port(struct net_device *dev, + { + struct registry_priv *pregpriv = &padapter->registrypriv; + // 0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec) +- if( pregpriv && extra_arg >= 0 && extra_arg < 3 ) ++ if( pregpriv && extra_arg < 3 ) + { + pregpriv->ampdu_enable= extra_arg; + DBG_871X("set ampdu_enable=%d\n",pregpriv->ampdu_enable); +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c +index 3854f27f833f..dff39f943b87 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/os_intfs.c +@@ -945,8 +945,14 @@ unsigned int rtw_classify8021d(struct sk_buff *skb) + return dscp >> 5; + } + +-static u16 rtw_select_queue(struct net_device *dev, struct sk_buff *skb, +- void *accel_priv, select_queue_fallback_t fallback) ++static u16 rtw_select_queue(struct net_device *dev, struct sk_buff *skb ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 13, 0) ++ , void *accel_priv ++#endif ++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(3,14,0)) ++ , select_queue_fallback_t fallback ++#endif ++) + { + _adapter *padapter = rtw_netdev_priv(dev); + struct mlme_priv *pmlmepriv = &padapter->mlmepriv; +@@ -1057,6 +1063,10 @@ int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname) + return 0; + } + ++static const struct device_type wlan_type = { ++ .name = "wlan", ++}; ++ + struct net_device *rtw_init_netdev(_adapter *old_padapter) + { + _adapter *padapter; +@@ -1072,6 +1082,7 @@ struct net_device *rtw_init_netdev(_adapter *old_padapter) + if (!pnetdev) + return NULL; + ++ pnetdev->dev.type = &wlan_type; + padapter = rtw_netdev_priv(pnetdev); + padapter->pnetdev = pnetdev; + +@@ -1681,9 +1692,6 @@ int _netdev_vir_if_open(struct net_device *pnetdev) + + padapter->bup = _TRUE; + padapter->hw_init_completed = _TRUE; +- +- rtw_start_mbssid_cam(padapter);//start mbssid_cam after bup = _TRUE & hw_init_completed = _TRUE +- + } + + padapter->net_closed = _FALSE; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c +index ba82c4db70dd..c02046db6149 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/recv_linux.c +@@ -136,7 +136,7 @@ int rtw_os_recvbuf_resource_free(_adapter *padapter, struct recv_buf *precvbuf) + void rtw_handle_tkip_mic_err(_adapter *padapter,u8 bgroup) + { + #ifdef CONFIG_IOCTL_CFG80211 +- enum nl80211_key_type key_type; ++ enum nl80211_key_type key_type = 0; + #endif + union iwreq_data wrqu; + struct iw_michaelmicfailure ev; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c +index aed1a6d8059d..bbd22ef1b819 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/rtw_android.c +@@ -96,13 +96,7 @@ typedef struct cmd_tlv { + #endif /* PNO_SUPPORT */ + + typedef struct android_wifi_priv_cmd { +- +-#ifdef CONFIG_COMPAT +- compat_uptr_t buf; +-#else + char *buf; +-#endif +- + int used_len; + int total_len; + } android_wifi_priv_cmd; +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c +index 09a5238c29a0..be72304d0a07 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/usb_intf.c +@@ -102,6 +102,7 @@ static void rtw_dev_remove(struct usb_interface *pusb_intf); + {USB_DEVICE(0x103C, 0x1629)},/* HP - Lite-On ,8188CUS Slim Combo */ \ + {USB_DEVICE(0x2001, 0x3308)},/* D-Link - Alpha */ \ + {USB_DEVICE(0x050D, 0x1102)},/* Belkin - Edimax */ \ ++ {USB_DEVICE(0x050D, 0x11F2)},/* ISY - Edimax */ \ + {USB_DEVICE(0x2019, 0xAB2A)},/* Planex - Abocom */ \ + {USB_DEVICE(0x20F4, 0x648B)},/* TRENDnet - Cameo */ \ + {USB_DEVICE(0x4855, 0x0090)},/* - Feixun */ \ +@@ -110,6 +111,8 @@ static void rtw_dev_remove(struct usb_interface *pusb_intf); + {USB_DEVICE(0x0BDA, 0x5088)},/* Thinkware - CC&C */ \ + {USB_DEVICE(0x4856, 0x0091)},/* NetweeN - Feixun */ \ + {USB_DEVICE(0x0846, 0x9041)}, /* Netgear - Cameo */ \ ++ {USB_DEVICE(0x0846, 0x9042)}, /* On Networks - N150MA */ \ ++ {USB_DEVICE(0x0846, 0x9043)}, /* Netgear N150 -WNA1000M */ \ + {USB_DEVICE(0x2019, 0x4902)},/* Planex - Etop */ \ + {USB_DEVICE(0x2019, 0xAB2E)},/* SW-WF02-AD15 -Abocom */ \ + {USB_DEVICE(0x2001, 0x330B)}, /* D-LINK - T&W */ \ +@@ -117,6 +120,7 @@ static void rtw_dev_remove(struct usb_interface *pusb_intf); + {USB_DEVICE(0x0B05, 0x17BA)}, /* ASUS - Edimax */ \ + {USB_DEVICE(0x0BDA, 0x1E1E)}, /* Intel - - */ \ + {USB_DEVICE(0x04BB, 0x094c)}, /* I-O DATA - Edimax */ \ ++ {USB_DEVICE(0X0BDA, 0x8176)}, /* TP-Link TL-WN723N */ \ + /****** 8188CTV ********/ \ + {USB_DEVICE(0xCDAB, 0x8011)}, /* - - compare */ \ + {USB_DEVICE(0x0BDA, 0x0A8A)}, /* Sony - Foxconn */ \ +@@ -991,7 +995,7 @@ static int rtw_resume(struct usb_interface *pusb_intf) + int rtw_resume_process(_adapter *padapter) + { + struct net_device *pnetdev; +- struct pwrctrl_priv *pwrpriv; ++ struct pwrctrl_priv *pwrpriv=NULL; + int ret = -1; + u32 start_time = rtw_get_current_time(); + _func_enter_; +@@ -1054,7 +1058,8 @@ int rtw_resume_process(_adapter *padapter) + rtw_unlock_suspend(); + #endif //CONFIG_RESUME_IN_WORKQUEUE + +- pwrpriv->bInSuspend = _FALSE; ++ if (pwrpriv) ++ pwrpriv->bInSuspend = _FALSE; + DBG_871X("<=== %s return %d.............. in %dms\n", __FUNCTION__ + , ret, rtw_get_passing_time_ms(start_time)); + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c b/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c +index b4a7523ee42d..4b113e945351 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/os_dep/osdep_service.c +@@ -790,7 +790,7 @@ void rtw_mfree2d(void *pbuf, int h, int w, int size) + rtw_mfree((u8 *)pbuf, h*sizeof(void*) + w*h*size); + } + +-void _rtw_memcpy(void* dst, void* src, u32 sz) ++void _rtw_memcpy(void* dst, const void* src, u32 sz) + { + + #if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD) +@@ -807,7 +807,7 @@ void _rtw_memcpy(void* dst, void* src, u32 sz) + + } + +-int _rtw_memcmp(void *dst, void *src, u32 sz) ++int _rtw_memcmp(const void *dst, const void *src, u32 sz) + { + + #if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1089_3ab628718b12144c1cec03462132cccda3741269.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1089_3ab628718b12144c1cec03462132cccda3741269.patch --- linux-4.9.13/debian/patches/rpi/rpi_1089_3ab628718b12144c1cec03462132cccda3741269.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1089_3ab628718b12144c1cec03462132cccda3741269.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,427 @@ +commit 3ab628718b12144c1cec03462132cccda3741269 +Author: Pantelis Antoniou +Date: Wed Dec 3 13:23:28 2014 +0200 + + OF: DT-Overlay configfs interface + + This is a port of Pantelis Antoniou's v3 port that makes use of the + new upstreamed configfs support for binary attributes. + + Original commit message: + + Add a runtime interface to using configfs for generic device tree overlay + usage. With it its possible to use device tree overlays without having + to use a per-platform overlay manager. + + Please see Documentation/devicetree/configfs-overlays.txt for more info. + + Changes since v2: + - Removed ifdef CONFIG_OF_OVERLAY (since for now it's required) + - Created a documentation entry + - Slight rewording in Kconfig + + Changes since v1: + - of_resolve() -> of_resolve_phandles(). + + Originally-signed-off-by: Pantelis Antoniou + Signed-off-by: Phil Elwell + + DT configfs: Fix build errors on other platforms + + Signed-off-by: Phil Elwell + + DT configfs: fix build error + + There is an error when compiling rpi-4.6.y branch: + CC drivers/of/configfs.o + drivers/of/configfs.c:291:21: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] + .default_groups = of_cfs_def_groups, + ^ + drivers/of/configfs.c:291:21: note: (near initialization for 'of_cfs_subsys.su_group.default_groups.next') + + The .default_groups is linked list since commit + 1ae1602de028acaa42a0f6ff18d19756f8e825c6. + This commit uses configfs_add_default_group to fix this problem. + + Signed-off-by: Slawomir Stepien + +diff --git a/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt +new file mode 100644 +index 000000000000..5fa43e064307 +--- /dev/null ++++ b/Documentation/devicetree/configfs-overlays.txt +@@ -0,0 +1,31 @@ ++Howto use the configfs overlay interface. ++ ++A device-tree configfs entry is created in /config/device-tree/overlays ++and and it is manipulated using standard file system I/O. ++Note that this is a debug level interface, for use by developers and ++not necessarily something accessed by normal users due to the ++security implications of having direct access to the kernel's device tree. ++ ++* To create an overlay you mkdir the directory: ++ ++ # mkdir /config/device-tree/overlays/foo ++ ++* Either you echo the overlay firmware file to the path property file. ++ ++ # echo foo.dtbo >/config/device-tree/overlays/foo/path ++ ++* Or you cat the contents of the overlay to the dtbo file ++ ++ # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo ++ ++The overlay file will be applied, and devices will be created/destroyed ++as required. ++ ++To remove it simply rmdir the directory. ++ ++ # rmdir /config/device-tree/overlays/foo ++ ++The rationalle of the dual interface (firmware & direct copy) is that each is ++better suited to different use patterns. The firmware interface is what's ++intended to be used by hardware managers in the kernel, while the copy interface ++make sense for developers (since it avoids problems with namespaces). +diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig +index ba7b034b2b91..de0da10d66e6 100644 +--- a/drivers/of/Kconfig ++++ b/drivers/of/Kconfig +@@ -112,4 +112,11 @@ config OF_OVERLAY + config OF_NUMA + bool + ++config OF_CONFIGFS ++ bool "Device Tree Overlay ConfigFS interface" ++ select CONFIGFS_FS ++ select OF_OVERLAY ++ help ++ Enable a simple user-space driven DT overlay interface. ++ + endif # OF +diff --git a/drivers/of/Makefile b/drivers/of/Makefile +index d7efd9d458aa..aa5ef9dd1fed 100644 +--- a/drivers/of/Makefile ++++ b/drivers/of/Makefile +@@ -1,4 +1,5 @@ + obj-y = base.o device.o platform.o ++obj-$(CONFIG_OF_CONFIGFS) += configfs.o + obj-$(CONFIG_OF_DYNAMIC) += dynamic.o + obj-$(CONFIG_OF_FLATTREE) += fdt.o + obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o +diff --git a/drivers/of/configfs.c b/drivers/of/configfs.c +new file mode 100644 +index 000000000000..0037e6868a6c +--- /dev/null ++++ b/drivers/of/configfs.c +@@ -0,0 +1,311 @@ ++/* ++ * Configfs entries for device-tree ++ * ++ * Copyright (C) 2013 - Pantelis Antoniou ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "of_private.h" ++ ++struct cfs_overlay_item { ++ struct config_item item; ++ ++ char path[PATH_MAX]; ++ ++ const struct firmware *fw; ++ struct device_node *overlay; ++ int ov_id; ++ ++ void *dtbo; ++ int dtbo_size; ++}; ++ ++static int create_overlay(struct cfs_overlay_item *overlay, void *blob) ++{ ++ int err; ++ ++ /* unflatten the tree */ ++ of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); ++ if (overlay->overlay == NULL) { ++ pr_err("%s: failed to unflatten tree\n", __func__); ++ err = -EINVAL; ++ goto out_err; ++ } ++ pr_debug("%s: unflattened OK\n", __func__); ++ ++ /* mark it as detached */ ++ of_node_set_flag(overlay->overlay, OF_DETACHED); ++ ++ /* perform resolution */ ++ err = of_resolve_phandles(overlay->overlay); ++ if (err != 0) { ++ pr_err("%s: Failed to resolve tree\n", __func__); ++ goto out_err; ++ } ++ pr_debug("%s: resolved OK\n", __func__); ++ ++ err = of_overlay_create(overlay->overlay); ++ if (err < 0) { ++ pr_err("%s: Failed to create overlay (err=%d)\n", ++ __func__, err); ++ goto out_err; ++ } ++ overlay->ov_id = err; ++ ++out_err: ++ return err; ++} ++ ++static inline struct cfs_overlay_item *to_cfs_overlay_item( ++ struct config_item *item) ++{ ++ return item ? container_of(item, struct cfs_overlay_item, item) : NULL; ++} ++ ++static ssize_t cfs_overlay_item_path_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ return sprintf(page, "%s\n", overlay->path); ++} ++ ++static ssize_t cfs_overlay_item_path_store(struct config_item *item, ++ const char *page, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ const char *p = page; ++ char *s; ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy to path buffer (and make sure it's always zero terminated */ ++ count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); ++ overlay->path[sizeof(overlay->path) - 1] = '\0'; ++ ++ /* strip trailing newlines */ ++ s = overlay->path + strlen(overlay->path); ++ while (s > overlay->path && *--s == '\n') ++ *s = '\0'; ++ ++ pr_debug("%s: path is '%s'\n", __func__, overlay->path); ++ ++ err = request_firmware(&overlay->fw, overlay->path, NULL); ++ if (err != 0) ++ goto out_err; ++ ++ err = create_overlay(overlay, (void *)overlay->fw->data); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ ++ release_firmware(overlay->fw); ++ overlay->fw = NULL; ++ ++ overlay->path[0] = '\0'; ++ return err; ++} ++ ++static ssize_t cfs_overlay_item_status_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ return sprintf(page, "%s\n", ++ overlay->ov_id >= 0 ? "applied" : "unapplied"); ++} ++ ++CONFIGFS_ATTR(cfs_overlay_item_, path); ++CONFIGFS_ATTR_RO(cfs_overlay_item_, status); ++ ++static struct configfs_attribute *cfs_overlay_attrs[] = { ++ &cfs_overlay_item_attr_path, ++ &cfs_overlay_item_attr_status, ++ NULL, ++}; ++ ++ssize_t cfs_overlay_item_dtbo_read(struct config_item *item, ++ void *buf, size_t max_count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ pr_debug("%s: buf=%p max_count=%zu\n", __func__, ++ buf, max_count); ++ ++ if (overlay->dtbo == NULL) ++ return 0; ++ ++ /* copy if buffer provided */ ++ if (buf != NULL) { ++ /* the buffer must be large enough */ ++ if (overlay->dtbo_size > max_count) ++ return -ENOSPC; ++ ++ memcpy(buf, overlay->dtbo, overlay->dtbo_size); ++ } ++ ++ return overlay->dtbo_size; ++} ++ ++ssize_t cfs_overlay_item_dtbo_write(struct config_item *item, ++ const void *buf, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy the contents */ ++ overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); ++ if (overlay->dtbo == NULL) ++ return -ENOMEM; ++ ++ overlay->dtbo_size = count; ++ ++ err = create_overlay(overlay, overlay->dtbo); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ kfree(overlay->dtbo); ++ overlay->dtbo = NULL; ++ overlay->dtbo_size = 0; ++ ++ return err; ++} ++ ++CONFIGFS_BIN_ATTR(cfs_overlay_item_, dtbo, NULL, SZ_1M); ++ ++static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { ++ &cfs_overlay_item_attr_dtbo, ++ NULL, ++}; ++ ++static void cfs_overlay_release(struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ if (overlay->ov_id >= 0) ++ of_overlay_destroy(overlay->ov_id); ++ if (overlay->fw) ++ release_firmware(overlay->fw); ++ /* kfree with NULL is safe */ ++ kfree(overlay->dtbo); ++ kfree(overlay); ++} ++ ++static struct configfs_item_operations cfs_overlay_item_ops = { ++ .release = cfs_overlay_release, ++}; ++ ++static struct config_item_type cfs_overlay_type = { ++ .ct_item_ops = &cfs_overlay_item_ops, ++ .ct_attrs = cfs_overlay_attrs, ++ .ct_bin_attrs = cfs_overlay_bin_attrs, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct config_item *cfs_overlay_group_make_item( ++ struct config_group *group, const char *name) ++{ ++ struct cfs_overlay_item *overlay; ++ ++ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); ++ if (!overlay) ++ return ERR_PTR(-ENOMEM); ++ overlay->ov_id = -1; ++ ++ config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); ++ return &overlay->item; ++} ++ ++static void cfs_overlay_group_drop_item(struct config_group *group, ++ struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ config_item_put(&overlay->item); ++} ++ ++static struct configfs_group_operations overlays_ops = { ++ .make_item = cfs_overlay_group_make_item, ++ .drop_item = cfs_overlay_group_drop_item, ++}; ++ ++static struct config_item_type overlays_type = { ++ .ct_group_ops = &overlays_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct configfs_group_operations of_cfs_ops = { ++ /* empty - we don't allow anything to be created */ ++}; ++ ++static struct config_item_type of_cfs_type = { ++ .ct_group_ops = &of_cfs_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++struct config_group of_cfs_overlay_group; ++ ++static struct configfs_subsystem of_cfs_subsys = { ++ .su_group = { ++ .cg_item = { ++ .ci_namebuf = "device-tree", ++ .ci_type = &of_cfs_type, ++ }, ++ }, ++ .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), ++}; ++ ++static int __init of_cfs_init(void) ++{ ++ int ret; ++ ++ pr_info("%s\n", __func__); ++ ++ config_group_init(&of_cfs_subsys.su_group); ++ config_group_init_type_name(&of_cfs_overlay_group, "overlays", ++ &overlays_type); ++ configfs_add_default_group(&of_cfs_overlay_group, ++ &of_cfs_subsys.su_group); ++ ++ ret = configfs_register_subsystem(&of_cfs_subsys); ++ if (ret != 0) { ++ pr_err("%s: failed to register subsys\n", __func__); ++ goto out; ++ } ++ pr_info("%s: OK\n", __func__); ++out: ++ return ret; ++} ++late_initcall(of_cfs_init); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1090_8011d9b47f314ce033d71cb25a25ec863a8ab939.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1090_8011d9b47f314ce033d71cb25a25ec863a8ab939.patch --- linux-4.9.13/debian/patches/rpi/rpi_1090_8011d9b47f314ce033d71cb25a25ec863a8ab939.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1090_8011d9b47f314ce033d71cb25a25ec863a8ab939.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,160 @@ +commit 8011d9b47f314ce033d71cb25a25ec863a8ab939 +Author: Cheong2K +Date: Fri Feb 26 18:20:10 2016 +0800 + + brcm: adds support for BCM43341 wifi + + brcmfmac: Disable power management + + Disable wireless power saving in the brcmfmac WLAN driver. This is a + temporary measure until the connectivity loss resulting from power + saving is resolved. + + Signed-off-by: Phil Elwell + + brcmfmac: Use original country code as a fallback + + Commit 73345fd212980d2e28a5c6d83801c903bd773680: + + brcmfmac: Configure country code using device specific settings + + prevents region codes from working on devices that lack a region code + translation table. In the event of an absent table, preserve the old + behaviour of using the provided code as-is. + + Signed-off-by: Phil Elwell + + brcmfmac: Plug memory leak in brcmf_fill_bss_param + + See: https://github.com/raspberrypi/linux/issues/1471 + + Signed-off-by: Phil Elwell + + brcmfmac: do not use internal roaming engine by default + + Some evidence of curing disconnects with this disabled, so make it a default. + Can be overridden with module parameter roamoff=0 + See: http://projectable.me/optimize-my-pi-wi-fi/ + + brcmfmac: Change stop_ap sequence + + Patch from Broadcom/Cypress to resolve a customer error + + Signed-off-by: Phil Elwell + +diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +index 78d9966a3957..3fcb1887b2d3 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -2756,6 +2756,8 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, + * preference in cfg struct to apply this to + * FW later while initializing the dongle + */ ++ pr_info("power management disabled\n"); ++ enabled = false; + cfg->pwr_save = enabled; + if (!check_vif_up(ifp->vif)) { + +@@ -4750,12 +4752,15 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); + if (err < 0) + brcmf_err("BRCMF_C_DOWN error %d\n", err); +- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); +- if (err < 0) +- brcmf_err("setting AP mode failed %d\n", err); ++ + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0); + if (err < 0) + brcmf_err("setting INFRA mode failed %d\n", err); ++ ++ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); ++ if (err < 0) ++ brcmf_err("setting AP mode failed %d\n", err); ++ + if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) + brcmf_fil_iovar_int_set(ifp, "mbss", 0); + brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY, +@@ -6737,12 +6742,18 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], + struct brcmfmac_pd_cc *country_codes; + struct brcmfmac_pd_cc_entry *cc; + s32 found_index; ++ char ccode[BRCMF_COUNTRY_BUF_SZ]; ++ int rev; + int i; + ++ memcpy(ccode, alpha2, sizeof(ccode)); ++ rev = -1; ++ + country_codes = drvr->settings->country_codes; + if (!country_codes) { +- brcmf_dbg(TRACE, "No country codes configured for device\n"); +- return -EINVAL; ++ brcmf_dbg(TRACE, "No country codes configured for device" ++ " - use requested value\n"); ++ goto use_input_value; + } + + if ((alpha2[0] == ccreq->country_abbrev[0]) && +@@ -6766,10 +6777,14 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], + brcmf_dbg(TRACE, "No country code match found\n"); + return -EINVAL; + } +- memset(ccreq, 0, sizeof(*ccreq)); +- ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev); +- memcpy(ccreq->ccode, country_codes->table[found_index].cc, ++ rev = country_codes->table[found_index].rev; ++ memcpy(ccode, country_codes->table[found_index].cc, + BRCMF_COUNTRY_BUF_SZ); ++ ++use_input_value: ++ memset(ccreq, 0, sizeof(*ccreq)); ++ ccreq->rev = cpu_to_le32(rev); ++ memcpy(ccreq->ccode, ccode, sizeof(ccode)); + ccreq->country_abbrev[0] = alpha2[0]; + ccreq->country_abbrev[1] = alpha2[1]; + ccreq->country_abbrev[2] = 0; +diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +index 3e15d64c6481..4051780f64f4 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -69,7 +69,7 @@ static int brcmf_fcmode; + module_param_named(fcmode, brcmf_fcmode, int, 0); + MODULE_PARM_DESC(fcmode, "Mode of firmware signalled flow control"); + +-static int brcmf_roamoff; ++static int brcmf_roamoff = 1; + module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR); + MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine"); + +diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +index b892dac70f4b..db5f8b70b407 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -604,6 +604,7 @@ BRCMF_FW_NVRAM_DEF(4329, "brcmfmac4329-sdio.bin", "brcmfmac4329-sdio.txt"); + BRCMF_FW_NVRAM_DEF(4330, "brcmfmac4330-sdio.bin", "brcmfmac4330-sdio.txt"); + BRCMF_FW_NVRAM_DEF(4334, "brcmfmac4334-sdio.bin", "brcmfmac4334-sdio.txt"); + BRCMF_FW_NVRAM_DEF(43340, "brcmfmac43340-sdio.bin", "brcmfmac43340-sdio.txt"); ++BRCMF_FW_NVRAM_DEF(43341, "brcmfmac43341-sdio.bin", "brcmfmac43341-sdio.txt"); + BRCMF_FW_NVRAM_DEF(4335, "brcmfmac4335-sdio.bin", "brcmfmac4335-sdio.txt"); + BRCMF_FW_NVRAM_DEF(43362, "brcmfmac43362-sdio.bin", "brcmfmac43362-sdio.txt"); + BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt"); +@@ -621,6 +622,7 @@ static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340), ++ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43341), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362), + BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), +diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h +index d0407d9ad782..f1fb8a3c7a32 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h ++++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h +@@ -36,6 +36,7 @@ + #define BRCM_CC_4330_CHIP_ID 0x4330 + #define BRCM_CC_4334_CHIP_ID 0x4334 + #define BRCM_CC_43340_CHIP_ID 43340 ++#define BRCM_CC_43341_CHIP_ID 43341 + #define BRCM_CC_43362_CHIP_ID 43362 + #define BRCM_CC_4335_CHIP_ID 0x4335 + #define BRCM_CC_4339_CHIP_ID 0x4339 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1091_553d27a05d9154e0a082c88e95697fa9f0021d6a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1091_553d27a05d9154e0a082c88e95697fa9f0021d6a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1091_553d27a05d9154e0a082c88e95697fa9f0021d6a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1091_553d27a05d9154e0a082c88e95697fa9f0021d6a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,23 @@ +commit 553d27a05d9154e0a082c88e95697fa9f0021d6a +Author: Phil Elwell +Date: Thu Dec 17 13:37:07 2015 +0000 + + hci_h5: Don't send conf_req when ACTIVE + + Without this patch, a modem and kernel can continuously bombard each + other with conf_req and conf_rsp messages, in a demented game of tag. + +diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c +index 0879d64b1caf..5161ab30fd53 100644 +--- a/drivers/bluetooth/hci_h5.c ++++ b/drivers/bluetooth/hci_h5.c +@@ -310,7 +310,8 @@ static void h5_handle_internal_rx(struct hci_uart *hu) + h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_req, 2) == 0) { + h5_link_control(hu, conf_rsp, 2); +- h5_link_control(hu, conf_req, 3); ++ if (h5->state != H5_ACTIVE) ++ h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_rsp, 2) == 0) { + if (H5_HDR_LEN(hdr) > 2) + h5->tx_win = (data[2] & 0x07); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1092_64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1092_64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1092_64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1092_64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,2623 @@ +commit 64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a +Author: popcornmix +Date: Mon Apr 13 17:16:29 2015 +0100 + + config: Add default configs + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +new file mode 100644 +index 000000000000..12e8155c175d +--- /dev/null ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -0,0 +1,1297 @@ ++CONFIG_LOCALVERSION="-v7" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM=y ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_SMP=y ++CONFIG_VMSPLIT_2G=y ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y ++CONFIG_VFP=y ++CONFIG_NEON=y ++CONFIG_KERNEL_MODE_NEON=y ++CONFIG_BINFMT_MISC=m ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_EKTF2127=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=y ++CONFIG_BCM_VC_CMA=y ++CONFIG_BCM_VCIO=y ++CONFIG_BCM_VC_SM=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_VIRT=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=y ++CONFIG_VIDEO_BCM2835_MMAL=m ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_HTU21=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++# CONFIG_CRYPTO_HW is not set ++CONFIG_ARM_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM_NEON=m ++CONFIG_CRYPTO_AES_ARM_BS=m ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +new file mode 100644 +index 000000000000..8acee9f31202 +--- /dev/null ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -0,0 +1,1308 @@ ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_MULTI_V6=y ++# CONFIG_ARCH_MULTI_V7 is not set ++CONFIG_ARCH_BCM=y ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_VFP=y ++CONFIG_BINFMT_MISC=m ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=y ++CONFIG_BCM_VC_CMA=y ++CONFIG_BCM_VCIO=y ++CONFIG_BCM_VC_SM=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=y ++CONFIG_VIDEO_BCM2835_MMAL=m ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_USB_GADGET=m ++CONFIG_USB_ZERO=m ++CONFIG_USB_AUDIO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_MASS_STORAGE=m ++CONFIG_USB_G_SERIAL=m ++CONFIG_USB_MIDI_GADGET=m ++CONFIG_USB_G_PRINTER=m ++CONFIG_USB_CDC_COMPOSITE=m ++CONFIG_USB_G_ACM_MS=m ++CONFIG_USB_G_MULTI=m ++CONFIG_USB_G_HID=m ++CONFIG_USB_G_WEBCAM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_HTU21=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CRYPTD=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++# CONFIG_CRYPTO_HW is not set ++CONFIG_ARM_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM=m ++CONFIG_CRYPTO_AES_ARM=m ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1093_559e7f533e1df2337d6a45659eb300cdde3c949e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1093_559e7f533e1df2337d6a45659eb300cdde3c949e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1093_559e7f533e1df2337d6a45659eb300cdde3c949e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1093_559e7f533e1df2337d6a45659eb300cdde3c949e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1409 @@ +commit 559e7f533e1df2337d6a45659eb300cdde3c949e +Author: Michael Zoran +Date: Wed Aug 24 03:35:56 2016 -0700 + + Add arm64 configuration and device tree differences. + Disable MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. + + ARM64: Modify default config to get raspbian to boot (#1686) + + 1. Enable emulation of deprecated instructions. + 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. + 3. Switch the default governer to powersave. + 4. Include the watchdog timer driver in the kernel image rather then a module. + + Tested with raspbian-jessie 2016-09-23. + +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 101794f5ce10..7d213c2c9042 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,5 +1,27 @@ + menu "Platform selection" + ++config MACH_BCM2709 ++ bool ++ ++config ARCH_BCM2709 ++ bool "Broadcom BCM2709 family" ++ select MACH_BCM2709 ++ select HAVE_SMP ++ select ARM_AMBA ++ select COMMON_CLK ++ select ARCH_HAS_CPUFREQ ++ select GENERIC_CLOCKEVENTS ++ select MULTI_IRQ_HANDLER ++ select SPARSE_IRQ ++ select MFD_SYSCON ++ select VC4 ++ select USE_OF ++ select ARCH_REQUIRE_GPIOLIB ++ select PINCTRL ++ select PINCTRL_BCM2835 ++ help ++ This enables support for Broadcom BCM2709 boards. ++ + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select GENERIC_IRQ_CHIP +diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile +index 05faf2a8a35c..2152448c8cf5 100644 +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,6 +1,7 @@ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb ++dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb + + always := $(dtb-y) + subdir-y := $(dts-dirs) +diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts +new file mode 100644 +index 000000000000..deb33441da95 +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +new file mode 100644 +index 000000000000..d7406f5a4620 +--- /dev/null ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -0,0 +1,1334 @@ ++# CONFIG_ARM_PATCH_PHYS_VIRT is not set ++CONFIG_PHYS_OFFSET=0 ++CONFIG_LOCALVERSION="-v8" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_64BIT=y ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++ ++# ++# ARM errata workarounds via the alternatives framework ++# ++CONFIG_ARM64_ERRATUM_826319=n ++CONFIG_ARM64_ERRATUM_827319=n ++CONFIG_ARM64_ERRATUM_824069=n ++CONFIG_ARM64_ERRATUM_819472=n ++CONFIG_ARM64_ERRATUM_832075=n ++CONFIG_ARM64_ERRATUM_845719=n ++CONFIG_ARM64_ERRATUM_843419=n ++CONFIG_CAVIUM_ERRATUM_22375=n ++CONFIG_CAVIUM_ERRATUM_23154=n ++CONFIG_CAVIUM_ERRATUM_27456=n ++CONFIG_ARM64_4K_PAGES=y ++CONFIG_ARM64_VA_BITS_39=y ++CONFIG_ARM64_VA_BITS=39 ++CONFIG_SCHED_MC=y ++CONFIG_NR_CPUS=4 ++CONFIG_HOTPLUG_CPU=y ++CONFIG_ARMV8_DEPRECATED=y ++CONFIG_SWP_EMULATION=y ++CONFIG_CP15_BARRIER_EMULATION=y ++CONFIG_SETEND_EMULATION=y ++ ++# ++# ARMv8.1 architectural features ++# ++CONFIG_ARM64_HW_AFDBM=y ++CONFIG_ARM64_PAN=y ++CONFIG_ARM64_LSE_ATOMICS=y ++CONFIG_ARM64_VHE=y ++ ++# ++# ARMv8.2 architectural features ++# ++CONFIG_ARM64_UAO=y ++CONFIG_ARM64_MODULE_CMODEL_LARGE=n ++CONFIG_RANDOMIZE_BASE=n ++ ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_TRIM_UNUSED_KSYMS=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM2709=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_SMP=y ++CONFIG_HAVE_ARM_ARCH_TIMER=y ++CONFIG_VMSPLIT_2G=y ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y ++CONFIG_VFP=y ++CONFIG_NEON=y ++CONFIG_KERNEL_MODE_NEON=y ++CONFIG_BINFMT_MISC=m ++CONFIG_COMPAT=y ++CONFIG_SYSVIPC_COMPAT=y ++ ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_IPVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=n ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_FT6236=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=n ++CONFIG_BCM_VC_CMA=n ++CONFIG_BCM_VCIO=n ++CONFIG_BCM_VC_SM=n ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_VIRT=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_BATTERY_DS2760=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=n ++CONFIG_VIDEO_BCM2835_MMAL=n ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_ARM=n ++CONFIG_SND_BCM2835=n ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=n ++CONFIG_USB_DWC2=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_ISL12057=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_R8723AU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++CONFIG_ARM64_CRYPTO=y ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y ++CONFIG_BCM2708_VCHIQ=n diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1094_933a62cb2268bb6bb614776dccfe2b28b23a31bb.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1094_933a62cb2268bb6bb614776dccfe2b28b23a31bb.patch --- linux-4.9.13/debian/patches/rpi/rpi_1094_933a62cb2268bb6bb614776dccfe2b28b23a31bb.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1094_933a62cb2268bb6bb614776dccfe2b28b23a31bb.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,75 @@ +commit 933a62cb2268bb6bb614776dccfe2b28b23a31bb +Author: Phil Elwell +Date: Mon Mar 7 15:05:11 2016 +0000 + + vchiq_arm: Tweak the logging output + + Signed-off-by: Phil Elwell + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +index 2c98da4307df..160db24aeea3 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +@@ -891,16 +891,14 @@ queue_message(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (SRVTRACE_ENABLED(service, +- VCHIQ_LOG_INFO)) +- vchiq_log_dump_mem("Sent", 0, +- header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (SRVTRACE_ENABLED(service, ++ VCHIQ_LOG_INFO)) ++ vchiq_log_dump_mem("Sent", 0, ++ header->data, ++ min(16, pos)); ++ + spin_lock("a_spinlock); + service_quota->message_use_count++; + +@@ -1039,16 +1037,13 @@ queue_message_sync(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (vchiq_sync_log_level >= +- VCHIQ_LOG_TRACE) +- vchiq_log_dump_mem("Sent Sync", +- 0, header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) ++ vchiq_log_dump_mem("Sent Sync", ++ 0, header->data, ++ min(16, pos)); ++ + VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count); + VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size); + } else { +@@ -1720,7 +1715,7 @@ parse_rx_slots(VCHIQ_STATE_T *state) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size) +@@ -2187,7 +2182,7 @@ sync_func(void *v) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + switch (type) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1095_492a5b68c24213067711a674e228fc47a9c21ef6.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1095_492a5b68c24213067711a674e228fc47a9c21ef6.patch --- linux-4.9.13/debian/patches/rpi/rpi_1095_492a5b68c24213067711a674e228fc47a9c21ef6.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1095_492a5b68c24213067711a674e228fc47a9c21ef6.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,58 @@ +commit 492a5b68c24213067711a674e228fc47a9c21ef6 +Author: Phil Elwell +Date: Wed Mar 23 14:16:25 2016 +0000 + + vchiq_arm: Access the dequeue_pending flag locked + + Reading through this code looking for another problem (now found in userland) + the use of dequeue_pending outside a lock didn't seem safe. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index 7b6cd4d80621..d8669fa7f39b 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -279,6 +279,7 @@ service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header, + USER_SERVICE_T *user_service; + VCHIQ_SERVICE_T *service; + VCHIQ_INSTANCE_T instance; ++ int skip_completion = 0; + DEBUG_INITIALISE(g_state.local) + + DEBUG_TRACE(SERVICE_CALLBACK_LINE); +@@ -345,9 +346,6 @@ service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header, + user_service->msg_queue[user_service->msg_insert & + (MSG_QUEUE_SIZE - 1)] = header; + user_service->msg_insert++; +- spin_unlock(&msg_queue_spinlock); +- +- up(&user_service->insert_event); + + /* If there is a thread waiting in DEQUEUE_MESSAGE, or if + ** there is a MESSAGE_AVAILABLE in the completion queue then +@@ -356,13 +354,22 @@ service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header, + if (((user_service->message_available_pos - + instance->completion_remove) >= 0) || + user_service->dequeue_pending) { +- DEBUG_TRACE(SERVICE_CALLBACK_LINE); + user_service->dequeue_pending = 0; +- return VCHIQ_SUCCESS; ++ skip_completion = 1; + } + ++ spin_unlock(&msg_queue_spinlock); ++ ++ up(&user_service->insert_event); ++ + header = NULL; + } ++ ++ if (skip_completion) { ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ return VCHIQ_SUCCESS; ++ } ++ + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + + return add_completion(instance, reason, header, user_service, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1096_1f1e9926edaecc0a878235ba9b6f788341a43403.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1096_1f1e9926edaecc0a878235ba9b6f788341a43403.patch --- linux-4.9.13/debian/patches/rpi/rpi_1096_1f1e9926edaecc0a878235ba9b6f788341a43403.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1096_1f1e9926edaecc0a878235ba9b6f788341a43403.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,26 @@ +commit 1f1e9926edaecc0a878235ba9b6f788341a43403 +Author: Phil Elwell +Date: Wed Mar 23 20:53:47 2016 +0000 + + vchiq_arm: Service callbacks must not fail + + Service callbacks are not allowed to return an error. The internal callback + that delivers events and messages to user tasks does not enqueue them if + the service is closing, but this is not an error and should not be + reported as such. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index d8669fa7f39b..54552c6ce54f 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -224,7 +224,7 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + } else if (instance->closing) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); +- return VCHIQ_ERROR; ++ return VCHIQ_SUCCESS; + } + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1097_a240fa2467d14bdc9d2b91973ce39dbac9418c4c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1097_a240fa2467d14bdc9d2b91973ce39dbac9418c4c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1097_a240fa2467d14bdc9d2b91973ce39dbac9418c4c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1097_a240fa2467d14bdc9d2b91973ce39dbac9418c4c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,63 @@ +commit a240fa2467d14bdc9d2b91973ce39dbac9418c4c +Author: Phil Elwell +Date: Thu Apr 21 13:49:32 2016 +0100 + + vchiq_arm: Add completion records under the mutex + + An issue was observed when flushing openmax components + which generate a large number of messages returning + buffers to host. + + We occasionally found a duplicate message from 16 + messages prior, resulting in a buffer returned twice. + + While only one thread adds completions, without the + mutex you don't get the protection of the automatic + memory barrier you get with synchronisation objects. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index 54552c6ce54f..bde8955b7d85 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -210,6 +210,8 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + VCHIQ_COMPLETION_DATA_T *completion; + DEBUG_INITIALISE(g_state.local) + ++ mutex_lock(&instance->completion_mutex); ++ + while (instance->completion_insert == + (instance->completion_remove + MAX_COMPLETIONS)) { + /* Out of space - wait for the client */ +@@ -217,11 +219,17 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + vchiq_log_trace(vchiq_arm_log_level, + "add_completion - completion queue full"); + DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); ++ ++ mutex_unlock(&instance->completion_mutex); + if (down_interruptible(&instance->remove_event) != 0) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback interrupted"); + return VCHIQ_RETRY; +- } else if (instance->closing) { ++ } ++ ++ mutex_lock(&instance->completion_mutex); ++ if (instance->closing) { ++ mutex_unlock(&instance->completion_mutex); + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); + return VCHIQ_SUCCESS; +@@ -254,8 +262,11 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + if (reason == VCHIQ_MESSAGE_AVAILABLE) + user_service->message_available_pos = + instance->completion_insert; ++ + instance->completion_insert++; + ++ mutex_unlock(&instance->completion_mutex); ++ + up(&instance->insert_event); + + return VCHIQ_SUCCESS; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1098_f81f30a1ab0c0142fcd9c83ed09c17c1609a956b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1098_f81f30a1ab0c0142fcd9c83ed09c17c1609a956b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1098_f81f30a1ab0c0142fcd9c83ed09c17c1609a956b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1098_f81f30a1ab0c0142fcd9c83ed09c17c1609a956b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,193 @@ +commit f81f30a1ab0c0142fcd9c83ed09c17c1609a956b +Author: Phil Elwell +Date: Mon Jun 20 13:51:44 2016 +0100 + + vchiq_arm: Avoid use of mutex in add_completion + + Claiming the completion_mutex within add_completion did prevent some + messages appearing twice, but provokes a deadlock caused by vcsm using + vchiq within a page fault handler. + + Revert the use of completion_mutex, and instead fix the original + problem using more memory barriers. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index bde8955b7d85..e5cdda12c7e5 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -64,10 +64,10 @@ + #define VCHIQ_MINOR 0 + + /* Some per-instance constants */ +-#define MAX_COMPLETIONS 16 ++#define MAX_COMPLETIONS 128 + #define MAX_SERVICES 64 + #define MAX_ELEMENTS 8 +-#define MSG_QUEUE_SIZE 64 ++#define MSG_QUEUE_SIZE 128 + + #define KEEPALIVE_VER 1 + #define KEEPALIVE_VER_MIN KEEPALIVE_VER +@@ -208,28 +208,24 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + void *bulk_userdata) + { + VCHIQ_COMPLETION_DATA_T *completion; ++ int insert; + DEBUG_INITIALISE(g_state.local) + +- mutex_lock(&instance->completion_mutex); +- +- while (instance->completion_insert == +- (instance->completion_remove + MAX_COMPLETIONS)) { ++ insert = instance->completion_insert; ++ while ((insert - instance->completion_remove) >= MAX_COMPLETIONS) { + /* Out of space - wait for the client */ + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_log_trace(vchiq_arm_log_level, + "add_completion - completion queue full"); + DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); + +- mutex_unlock(&instance->completion_mutex); + if (down_interruptible(&instance->remove_event) != 0) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback interrupted"); + return VCHIQ_RETRY; + } + +- mutex_lock(&instance->completion_mutex); + if (instance->closing) { +- mutex_unlock(&instance->completion_mutex); + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); + return VCHIQ_SUCCESS; +@@ -237,9 +233,7 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + } + +- completion = +- &instance->completions[instance->completion_insert & +- (MAX_COMPLETIONS - 1)]; ++ completion = &instance->completions[insert & (MAX_COMPLETIONS - 1)]; + + completion->header = header; + completion->reason = reason; +@@ -260,12 +254,9 @@ add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason, + wmb(); + + if (reason == VCHIQ_MESSAGE_AVAILABLE) +- user_service->message_available_pos = +- instance->completion_insert; ++ user_service->message_available_pos = insert; + +- instance->completion_insert++; +- +- mutex_unlock(&instance->completion_mutex); ++ instance->completion_insert = ++insert; + + up(&instance->insert_event); + +@@ -795,6 +786,7 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) + instance->completion_insert) + && !instance->closing) { + int rc; ++ + DEBUG_TRACE(AWAIT_COMPLETION_LINE); + mutex_unlock(&instance->completion_mutex); + rc = down_interruptible(&instance->insert_event); +@@ -809,24 +801,29 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) + } + DEBUG_TRACE(AWAIT_COMPLETION_LINE); + +- /* A read memory barrier is needed to stop prefetch of a stale +- ** completion record +- */ +- rmb(); +- + if (ret == 0) { + int msgbufcount = args.msgbufcount; ++ int remove; ++ ++ remove = instance->completion_remove; ++ + for (ret = 0; ret < args.count; ret++) { + VCHIQ_COMPLETION_DATA_T *completion; + VCHIQ_SERVICE_T *service; + USER_SERVICE_T *user_service; + VCHIQ_HEADER_T *header; +- if (instance->completion_remove == +- instance->completion_insert) ++ ++ if (remove == instance->completion_insert) + break; ++ + completion = &instance->completions[ +- instance->completion_remove & +- (MAX_COMPLETIONS - 1)]; ++ remove & (MAX_COMPLETIONS - 1)]; ++ ++ ++ /* A read memory barrier is needed to prevent ++ ** the prefetch of a stale completion record ++ */ ++ rmb(); + + service = completion->service_userdata; + user_service = service->base.userdata; +@@ -903,7 +900,11 @@ vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) + break; + } + +- instance->completion_remove++; ++ /* Ensure that the above copy has completed ++ ** before advancing the remove pointer. */ ++ mb(); ++ ++ instance->completion_remove = ++remove; + } + + if (msgbufcount != args.msgbufcount) { +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +index 160db24aeea3..71a3bedc5531 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +@@ -610,15 +610,15 @@ process_free_queue(VCHIQ_STATE_T *state) + BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)]; + int slot_queue_available; + +- /* Use a read memory barrier to ensure that any state that may have +- ** been modified by another thread is not masked by stale prefetched +- ** values. */ +- rmb(); +- + /* Find slots which have been freed by the other side, and return them + ** to the available queue. */ + slot_queue_available = state->slot_queue_available; + ++ /* Use a memory barrier to ensure that any state that may have been ++ ** modified by another thread is not masked by stale prefetched ++ ** values. */ ++ mb(); ++ + while (slot_queue_available != local->slot_queue_recycle) { + unsigned int pos; + int slot_index = local->slot_queue[slot_queue_available++ & +@@ -626,6 +626,8 @@ process_free_queue(VCHIQ_STATE_T *state) + char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index); + int data_found = 0; + ++ rmb(); ++ + vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x", + state->id, slot_index, (unsigned int)data, + local->slot_queue_recycle, slot_queue_available); +@@ -741,6 +743,8 @@ process_free_queue(VCHIQ_STATE_T *state) + up(&state->data_quota_event); + } + ++ mb(); ++ + state->slot_queue_available = slot_queue_available; + up(&state->slot_available_event); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1099_6f779e846ac732f0c7edea8ad386fb0337e9ac28.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1099_6f779e846ac732f0c7edea8ad386fb0337e9ac28.patch --- linux-4.9.13/debian/patches/rpi/rpi_1099_6f779e846ac732f0c7edea8ad386fb0337e9ac28.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1099_6f779e846ac732f0c7edea8ad386fb0337e9ac28.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,35 @@ +commit 6f779e846ac732f0c7edea8ad386fb0337e9ac28 +Author: Eric Anholt +Date: Mon Oct 3 10:14:10 2016 -0700 + + staging/vchi: Convert to current get_user_pages() arguments. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +index 1091b9f1dd07..8c7f31f8d395 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -420,7 +420,7 @@ create_pagelist(char __user *buf, size_t count, unsigned short type, + *need_release = 0; /* do not try and release vmalloc pages */ + } else { + down_read(&task->mm->mmap_sem); +- actual_pages = get_user_pages(task, task->mm, ++ actual_pages = get_user_pages( + (unsigned long)buf & ~(PAGE_SIZE - 1), + num_pages, + (type == PAGELIST_READ) ? FOLL_WRITE : 0, +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index e5cdda12c7e5..085d37588c59 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -1492,8 +1492,7 @@ dump_phys_mem(void *virt_addr, uint32_t num_bytes) + } + + down_read(¤t->mm->mmap_sem); +- rc = get_user_pages(current, /* task */ +- current->mm, /* mm */ ++ rc = get_user_pages( + (unsigned long)virt_addr, /* start */ + num_pages, /* len */ + 0, /* gup_flags */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1100_0230d494fd32ff93cd15cd0b5cb1938724a82814.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1100_0230d494fd32ff93cd15cd0b5cb1938724a82814.patch --- linux-4.9.13/debian/patches/rpi/rpi_1100_0230d494fd32ff93cd15cd0b5cb1938724a82814.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1100_0230d494fd32ff93cd15cd0b5cb1938724a82814.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,43 @@ +commit 0230d494fd32ff93cd15cd0b5cb1938724a82814 +Author: Eric Anholt +Date: Mon Oct 3 10:16:03 2016 -0700 + + staging/vchi: Update for rename of page_cache_release() to put_page(). + + Signed-off-by: Eric Anholt + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +index 8c7f31f8d395..862fabf5682c 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -438,7 +438,7 @@ create_pagelist(char __user *buf, size_t count, unsigned short type, + while (actual_pages > 0) + { + actual_pages--; +- page_cache_release(pages[actual_pages]); ++ put_page(pages[actual_pages]); + } + kfree(pagelist); + if (actual_pages == 0) +@@ -577,7 +577,7 @@ free_pagelist(PAGELIST_T *pagelist, int actual) + offset = 0; + set_page_dirty(pg); + } +- page_cache_release(pg); ++ put_page(pg); + } + } + +diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +index 085d37588c59..5a2b8fb459eb 100644 +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -1530,7 +1530,7 @@ dump_phys_mem(void *virt_addr, uint32_t num_bytes) + kunmap(page); + + for (page_idx = 0; page_idx < num_pages; page_idx++) +- page_cache_release(pages[page_idx]); ++ put_page(pages[page_idx]); + + kfree(pages); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1101_3e1f1e11da334f8794cd65d7ebe6a307a18bfd31.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1101_3e1f1e11da334f8794cd65d7ebe6a307a18bfd31.patch --- linux-4.9.13/debian/patches/rpi/rpi_1101_3e1f1e11da334f8794cd65d7ebe6a307a18bfd31.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1101_3e1f1e11da334f8794cd65d7ebe6a307a18bfd31.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,22 @@ +commit 3e1f1e11da334f8794cd65d7ebe6a307a18bfd31 +Author: Eric Anholt +Date: Mon Oct 3 10:21:17 2016 -0700 + + drivers/vchi: Remove dependency on CONFIG_BROKEN. + + The driver builds now. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/staging/vc04_services/Kconfig b/drivers/staging/vc04_services/Kconfig +index 9676fb29075a..db8e1beb89f9 100644 +--- a/drivers/staging/vc04_services/Kconfig ++++ b/drivers/staging/vc04_services/Kconfig +@@ -1,6 +1,6 @@ + config BCM2708_VCHIQ + tristate "Videocore VCHIQ" +- depends on RASPBERRYPI_FIRMWARE && BROKEN ++ depends on RASPBERRYPI_FIRMWARE + default y + help + Kernel to VideoCore communication interface for the diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1102_ebf60c810040db236e2239832884fc2588401ddf.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1102_ebf60c810040db236e2239832884fc2588401ddf.patch --- linux-4.9.13/debian/patches/rpi/rpi_1102_ebf60c810040db236e2239832884fc2588401ddf.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1102_ebf60c810040db236e2239832884fc2588401ddf.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,42 @@ +commit ebf60c810040db236e2239832884fc2588401ddf +Author: Eric Anholt +Date: Wed Sep 14 09:16:19 2016 +0100 + + raspberrypi-firmware: Export the general transaction function. + + The vc4-firmware-kms module is going to be doing the MBOX FB call. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c +index 3f070bd38a91..f261b64d1657 100644 +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -42,7 +42,7 @@ static void response_callback(struct mbox_client *cl, void *msg) + * Sends a request to the firmware through the BCM2835 mailbox driver, + * and synchronously waits for the reply. + */ +-static int ++int + rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) + { + u32 message = MBOX_MSG(chan, data); +@@ -63,6 +63,7 @@ rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) + + return ret; + } ++EXPORT_SYMBOL_GPL(rpi_firmware_transaction); + + /** + * rpi_firmware_property_list - Submit firmware property list +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index e92278968b2b..09e3d871d110 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -131,5 +131,6 @@ int rpi_firmware_property(struct rpi_firmware *fw, + int rpi_firmware_property_list(struct rpi_firmware *fw, + void *data, size_t tag_size); + struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); ++int rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data); + + #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1103_d6fa374e5e3f94af64b676611746e766b52ea949.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1103_d6fa374e5e3f94af64b676611746e766b52ea949.patch --- linux-4.9.13/debian/patches/rpi/rpi_1103_d6fa374e5e3f94af64b676611746e766b52ea949.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1103_d6fa374e5e3f94af64b676611746e766b52ea949.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,21 @@ +commit d6fa374e5e3f94af64b676611746e766b52ea949 +Author: Eric Anholt +Date: Wed Sep 14 09:18:09 2016 +0100 + + raspberrypi-firmware: Define the MBOX channel in the header. + + Signed-off-by: Eric Anholt + +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index 09e3d871d110..2859db09e25b 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -12,6 +12,8 @@ + #include + #include + ++#define RPI_FIRMWARE_CHAN_FB 1 ++ + struct rpi_firmware; + + enum rpi_firmware_property_status { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1104_f3732290e8f16978dd5828e70c2463b67cb07765.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1104_f3732290e8f16978dd5828e70c2463b67cb07765.patch --- linux-4.9.13/debian/patches/rpi/rpi_1104_f3732290e8f16978dd5828e70c2463b67cb07765.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1104_f3732290e8f16978dd5828e70c2463b67cb07765.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,761 @@ +commit f3732290e8f16978dd5828e70c2463b67cb07765 +Author: Eric Anholt +Date: Wed Sep 14 08:39:33 2016 +0100 + + drm/vc4: Add a mode for using the closed firmware for display. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile +index fb77db755e0a..c6dd06cca983 100644 +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -8,6 +8,7 @@ vc4-y := \ + vc4_crtc.o \ + vc4_drv.o \ + vc4_dpi.o \ ++ vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ +diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c +index d544ff9b0d46..13212788eef0 100644 +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -163,6 +163,9 @@ int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id, + int vblank_lines; + int ret = 0; + ++ if (vc4->firmware_kms) ++ return 0; ++ + /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ + + /* Get optional system timestamp before query. */ +@@ -656,6 +659,11 @@ int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id) + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return 0; ++ } ++ + CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); + + return 0; +@@ -666,6 +674,11 @@ void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id) + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return; ++ } ++ + CRTC_WRITE(PV_INTEN, 0); + } + +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 8703f56b7947..6c4a4fbc86d0 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -292,6 +292,7 @@ static struct platform_driver *const component_drivers[] = { + &vc4_dpi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, ++ &vc4_firmware_kms_driver, + &vc4_v3d_driver, + }; + +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index 7c1e4d97486f..e1f6ab747f36 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -12,6 +12,9 @@ + struct vc4_dev { + struct drm_device *dev; + ++ bool firmware_kms; ++ struct rpi_firmware *firmware; ++ + struct vc4_hdmi *hdmi; + struct vc4_hvs *hvs; + struct vc4_crtc *crtc[3]; +@@ -460,6 +463,10 @@ void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index); + extern struct platform_driver vc4_dpi_driver; + int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_firmware_kms.c */ ++extern struct platform_driver vc4_firmware_kms_driver; ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); ++ + /* vc4_gem.c */ + void vc4_gem_init(struct drm_device *dev); + void vc4_gem_destroy(struct drm_device *dev); +diff --git a/drivers/gpu/drm/vc4/vc4_firmware_kms.c b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +new file mode 100644 +index 000000000000..d18a1dae51a2 +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -0,0 +1,660 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/** ++ * DOC: VC4 firmware KMS module. ++ * ++ * As a hack to get us from the current closed source driver world ++ * toward a totally open stack, implement KMS on top of the Raspberry ++ * Pi's firmware display stack. ++ */ ++ ++#include "drm_atomic.h" ++#include "drm_atomic_helper.h" ++#include "drm_plane_helper.h" ++#include "drm_crtc_helper.h" ++#include "linux/clk.h" ++#include "linux/debugfs.h" ++#include "drm_fb_cma_helper.h" ++#include "linux/component.h" ++#include "linux/of_device.h" ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++#include ++ ++/* The firmware delivers a vblank interrupt to us through the SMI ++ * hardware, which has only this one register. ++ */ ++#define SMICS 0x0 ++#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) ++ ++struct vc4_crtc { ++ struct drm_crtc base; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ void __iomem *regs; ++ ++ struct drm_pending_vblank_event *event; ++}; ++ ++static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) ++{ ++ return container_of(crtc, struct vc4_crtc, base); ++} ++ ++struct vc4_fkms_encoder { ++ struct drm_encoder base; ++}; ++ ++static inline struct vc4_fkms_encoder * ++to_vc4_fkms_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_fkms_encoder, base); ++} ++ ++/* VC4 FKMS connector KMS struct */ ++struct vc4_fkms_connector { ++ struct drm_connector base; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++}; ++ ++static inline struct vc4_fkms_connector * ++to_vc4_fkms_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_fkms_connector, base); ++} ++ ++/* Firmware's structure for making an FB mbox call. */ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++ u16 cmap[256]; ++}; ++ ++struct vc4_fkms_plane { ++ struct drm_plane base; ++ struct fbinfo_s *fbinfo; ++ dma_addr_t fbinfo_bus_addr; ++ u32 pitch; ++}; ++ ++static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) ++{ ++ return (struct vc4_fkms_plane *)plane; ++} ++ ++/* Turns the display on/off. */ ++static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ ++ u32 packet = blank; ++ return rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &packet, sizeof(packet)); ++} ++ ++static void vc4_primary_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; ++ u32 bpp = 32; ++ int ret; ++ ++ vc4_plane_set_primary_blank(plane, false); ++ ++ fbinfo->xres = state->crtc_w; ++ fbinfo->yres = state->crtc_h; ++ fbinfo->xres_virtual = state->crtc_w; ++ fbinfo->yres_virtual = state->crtc_h; ++ fbinfo->bpp = bpp; ++ fbinfo->xoffset = state->crtc_x; ++ fbinfo->yoffset = state->crtc_y; ++ fbinfo->base = bo->paddr + fb->offsets[0]; ++ fbinfo->pitch = fb->pitches[0]; ++ /* A bug in the firmware makes it so that if the fb->base is ++ * set to nonzero, the configured pitch gets overwritten with ++ * the previous pitch. So, to get the configured pitch ++ * recomputed, we have to make it allocate itself a new buffer ++ * in VC memory, first. ++ */ ++ if (vc4_plane->pitch != fb->pitches[0]) { ++ u32 saved_base = fbinfo->base; ++ fbinfo->base = 0; ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ fbinfo->base = saved_base; ++ ++ vc4_plane->pitch = fbinfo->pitch; ++ WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); ++ } ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); ++ WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); ++} ++ ++static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ vc4_plane_set_primary_blank(plane, true); ++} ++ ++static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ int ret; ++ u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; ++ u32 packet_info[] = { state->crtc_w, state->crtc_h, ++ 0, /* unused */ ++ bo->paddr + fb->offsets[0], ++ 0, 0, /* hotx, hoty */}; ++ WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); ++ WARN_ON_ONCE(fb->bits_per_pixel != 32); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_INFO, ++ &packet_info, ++ sizeof(packet_info)); ++ if (ret || packet_info[0] != 0) ++ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); ++} ++ ++static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ u32 packet_state[] = { false, 0, 0, 0 }; ++ int ret; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++} ++ ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_plane_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_plane_destroy(struct drm_plane *plane) ++{ ++ drm_plane_helper_disable(plane); ++ drm_plane_cleanup(plane); ++} ++ ++static const struct drm_plane_funcs vc4_plane_funcs = { ++ .update_plane = drm_atomic_helper_update_plane, ++ .disable_plane = drm_atomic_helper_disable_plane, ++ .destroy = vc4_plane_destroy, ++ .set_property = NULL, ++ .reset = drm_atomic_helper_plane_reset, ++ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_primary_plane_atomic_update, ++ .atomic_disable = vc4_primary_plane_atomic_disable, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_cursor_plane_atomic_update, ++ .atomic_disable = vc4_cursor_plane_atomic_disable, ++}; ++ ++static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, ++ enum drm_plane_type type) ++{ ++ struct drm_plane *plane = NULL; ++ struct vc4_fkms_plane *vc4_plane; ++ u32 xrgb8888 = DRM_FORMAT_XRGB8888; ++ u32 argb8888 = DRM_FORMAT_ARGB8888; ++ int ret = 0; ++ bool primary = (type == DRM_PLANE_TYPE_PRIMARY); ++ ++ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), ++ GFP_KERNEL); ++ if (!vc4_plane) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ ++ plane = &vc4_plane->base; ++ ret = drm_universal_plane_init(dev, plane, 0xff, ++ &vc4_plane_funcs, ++ primary ? &xrgb8888 : &argb8888, 1, ++ type, NULL); ++ ++ if (type == DRM_PLANE_TYPE_PRIMARY) { ++ vc4_plane->fbinfo = ++ dma_alloc_coherent(dev->dev, ++ sizeof(*vc4_plane->fbinfo), ++ &vc4_plane->fbinfo_bus_addr, ++ GFP_KERNEL); ++ memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); ++ ++ drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); ++ } else { ++ drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); ++ } ++ ++ return plane; ++fail: ++ if (plane) ++ vc4_plane_destroy(plane); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) ++{ ++ /* Everyting is handled in the planes. */ ++} ++ ++static void vc4_crtc_disable(struct drm_crtc *crtc) ++{ ++} ++ ++static void vc4_crtc_enable(struct drm_crtc *crtc) ++{ ++} ++ ++static int vc4_crtc_atomic_check(struct drm_crtc *crtc, ++ struct drm_crtc_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, ++ struct drm_crtc_state *old_state) ++{ ++} ++ ++static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ if (vc4_crtc->event) { ++ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); ++ vc4_crtc->event = NULL; ++ drm_crtc_vblank_put(crtc); ++ } ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) ++{ ++ struct vc4_crtc *vc4_crtc = data; ++ u32 stat = readl(vc4_crtc->regs + SMICS); ++ irqreturn_t ret = IRQ_NONE; ++ ++ if (stat & SMICS_INTERRUPTS) { ++ writel(0, vc4_crtc->regs + SMICS); ++ drm_crtc_handle_vblank(&vc4_crtc->base); ++ vc4_crtc_handle_page_flip(vc4_crtc); ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++static int vc4_page_flip(struct drm_crtc *crtc, ++ struct drm_framebuffer *fb, ++ struct drm_pending_vblank_event *event, ++ uint32_t flags) ++{ ++ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { ++ DRM_ERROR("Async flips aren't allowed\n"); ++ return -EINVAL; ++ } ++ ++ return drm_atomic_helper_page_flip(crtc, fb, event, flags); ++} ++ ++static const struct drm_crtc_funcs vc4_crtc_funcs = { ++ .set_config = drm_atomic_helper_set_config, ++ .destroy = drm_crtc_cleanup, ++ .page_flip = vc4_page_flip, ++ .set_property = NULL, ++ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ ++ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ ++ .reset = drm_atomic_helper_crtc_reset, ++ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++}; ++ ++static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { ++ .mode_set_nofb = vc4_crtc_mode_set_nofb, ++ .disable = vc4_crtc_disable, ++ .enable = vc4_crtc_enable, ++ .atomic_check = vc4_crtc_atomic_check, ++ .atomic_flush = vc4_crtc_atomic_flush, ++}; ++ ++/* Frees the page flip event when the DRM device is closed with the ++ * event still outstanding. ++ */ ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ ++ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { ++ kfree(&vc4_crtc->event->base); ++ drm_crtc_vblank_put(crtc); ++ vc4_crtc->event = NULL; ++ } ++ ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static const struct of_device_id vc4_firmware_kms_dt_match[] = { ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, ++ {} ++}; ++ ++static enum drm_connector_status ++vc4_fkms_connector_detect(struct drm_connector *connector, bool force) ++{ ++ return connector_status_connected; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_device *dev = connector->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ u32 wh[2] = {0, 0}; ++ int ret; ++ struct drm_display_mode *mode; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, ++ &wh, sizeof(wh)); ++ if (ret) { ++ DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", ++ ret, wh[0], wh[1]); ++ return 0; ++ } ++ ++ mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, ++ 0, 0, false); ++ drm_mode_probed_add(connector, mode); ++ ++ return 1; ++} ++ ++static struct drm_encoder * ++vc4_fkms_connector_best_encoder(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ return fkms_connector->encoder; ++} ++ ++static void vc4_fkms_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static const struct drm_connector_funcs vc4_fkms_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_fkms_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_fkms_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { ++ .get_modes = vc4_fkms_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ ++static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, ++ struct drm_encoder *encoder) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_fkms_connector *fkms_connector; ++ int ret = 0; ++ ++ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), ++ GFP_KERNEL); ++ if (!fkms_connector) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ connector = &fkms_connector->base; ++ ++ fkms_connector->encoder = encoder; ++ ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); ++ ++ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT); ++ ++ connector->interlace_allowed = 0; ++ connector->doublescan_allowed = 0; ++ ++ drm_mode_connector_attach_encoder(connector, encoder); ++ ++ return connector; ++ ++ fail: ++ if (connector) ++ vc4_fkms_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) ++{ ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { ++ .destroy = vc4_fkms_encoder_destroy, ++}; ++ ++static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) ++{ ++} ++ ++static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) ++{ ++} ++ ++static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { ++ .enable = vc4_fkms_encoder_enable, ++ .disable = vc4_fkms_encoder_disable, ++}; ++ ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_crtc *vc4_crtc; ++ struct vc4_fkms_encoder *vc4_encoder; ++ struct drm_crtc *crtc; ++ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; ++ struct device_node *firmware_node; ++ int ret; ++ ++ vc4->firmware_kms = true; ++ ++ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); ++ if (!vc4_crtc) ++ return -ENOMEM; ++ crtc = &vc4_crtc->base; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = rpi_firmware_get(firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ /* Map the SMI interrupt reg */ ++ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(vc4_crtc->regs)) ++ return PTR_ERR(vc4_crtc->regs); ++ ++ /* For now, we create just the primary and the legacy cursor ++ * planes. We should be able to stack more planes on easily, ++ * but to do that we would need to compute the bandwidth ++ * requirement of the plane configuration, and reject ones ++ * that will take too much. ++ */ ++ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); ++ if (IS_ERR(primary_plane)) { ++ dev_err(dev, "failed to construct primary plane\n"); ++ ret = PTR_ERR(primary_plane); ++ goto err; ++ } ++ ++ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); ++ if (IS_ERR(cursor_plane)) { ++ dev_err(dev, "failed to construct cursor plane\n"); ++ ret = PTR_ERR(cursor_plane); ++ goto err; ++ } ++ ++ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, ++ &vc4_crtc_funcs, NULL); ++ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); ++ primary_plane->crtc = crtc; ++ cursor_plane->crtc = crtc; ++ vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc; ++ ++ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); ++ if (!vc4_encoder) ++ return -ENOMEM; ++ vc4_crtc->encoder = &vc4_encoder->base; ++ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; ++ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, ++ DRM_MODE_ENCODER_TMDS, NULL); ++ drm_encoder_helper_add(&vc4_encoder->base, ++ &vc4_fkms_encoder_helper_funcs); ++ ++ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); ++ if (IS_ERR(vc4_crtc->connector)) { ++ ret = PTR_ERR(vc4_crtc->connector); ++ goto err_destroy_encoder; ++ } ++ ++ writel(0, vc4_crtc->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, "vc4 firmware kms", ++ vc4_crtc); ++ if (ret) ++ goto err_destroy_connector; ++ ++ platform_set_drvdata(pdev, vc4_crtc); ++ ++ return 0; ++ ++err_destroy_connector: ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++err_destroy_encoder: ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ list_for_each_entry_safe(destroy_plane, temp, ++ &drm->mode_config.plane_list, head) { ++ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) ++ destroy_plane->funcs->destroy(destroy_plane); ++ } ++err: ++ return ret; ++} ++ ++static void vc4_fkms_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); ++ ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ drm_crtc_cleanup(&vc4_crtc->base); ++ ++ platform_set_drvdata(pdev, NULL); ++} ++ ++static const struct component_ops vc4_fkms_ops = { ++ .bind = vc4_fkms_bind, ++ .unbind = vc4_fkms_unbind, ++}; ++ ++static int vc4_fkms_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_fkms_ops); ++} ++ ++static int vc4_fkms_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_fkms_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_firmware_kms_driver = { ++ .probe = vc4_fkms_probe, ++ .remove = vc4_fkms_remove, ++ .driver = { ++ .name = "vc4_firmware_kms", ++ .of_match_table = vc4_firmware_kms_dt_match, ++ }, ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1105_99030645593464749d826228febe9e9aac7cad24.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1105_99030645593464749d826228febe9e9aac7cad24.patch --- linux-4.9.13/debian/patches/rpi/rpi_1105_99030645593464749d826228febe9e9aac7cad24.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1105_99030645593464749d826228febe9e9aac7cad24.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,86 @@ +commit 99030645593464749d826228febe9e9aac7cad24 +Author: Noralf Trønnes +Date: Sat Sep 17 15:07:10 2016 +0200 + + i2c: bcm2835: Fix hang for writing messages larger than 16 bytes + + Writing messages larger than the FIFO size results in a hang, rendering + the machine unusable. This is because the RXD status flag is set on the + first interrupt which results in bcm2835_drain_rxfifo() stealing bytes + from the buffer. The controller continues to trigger interrupts waiting + for the missing bytes, but bcm2835_fill_txfifo() has none to give. + In this situation wait_for_completion_timeout() apparently is unable to + stop the madness. + + The BCM2835 ARM Peripherals datasheet has this to say about the flags: + TXD: is set when the FIFO has space for at least one byte of data. + RXD: is set when the FIFO contains at least one byte of data. + TXW: is set during a write transfer and the FIFO is less than full. + RXR: is set during a read transfer and the FIFO is or more full. + + Implementing the logic from the downstream i2c-bcm2708 driver solved + the hang problem. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + Reviewed-by: Martin Sperl + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index d4f3239b5686..f283b714aa79 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev { + int irq; + struct i2c_adapter adapter; + struct completion completion; ++ struct i2c_msg *curr_msg; + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; +@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + return IRQ_HANDLED; + } + +- if (val & BCM2835_I2C_S_RXD) { +- bcm2835_drain_rxfifo(i2c_dev); +- if (!(val & BCM2835_I2C_S_DONE)) +- return IRQ_HANDLED; +- } +- + if (val & BCM2835_I2C_S_DONE) { +- if (i2c_dev->msg_buf_remaining) ++ if (i2c_dev->curr_msg->flags & I2C_M_RD) { ++ bcm2835_drain_rxfifo(i2c_dev); ++ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); ++ } ++ ++ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining) + i2c_dev->msg_err = BCM2835_I2C_S_LEN; + else + i2c_dev->msg_err = 0; +@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + return IRQ_HANDLED; + } + +- if (val & BCM2835_I2C_S_TXD) { ++ if (val & BCM2835_I2C_S_TXW) { + bcm2835_fill_txfifo(i2c_dev); + return IRQ_HANDLED; + } + ++ if (val & BCM2835_I2C_S_RXR) { ++ bcm2835_drain_rxfifo(i2c_dev); ++ return IRQ_HANDLED; ++ } ++ + return IRQ_NONE; + } + +@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, + u32 c; + unsigned long time_left; + ++ i2c_dev->curr_msg = msg; + i2c_dev->msg_buf = msg->buf; + i2c_dev->msg_buf_remaining = msg->len; + reinit_completion(&i2c_dev->completion); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1106_bc84e97ab50364bc820a8f65ec63f08e0b0cd29a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1106_bc84e97ab50364bc820a8f65ec63f08e0b0cd29a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1106_bc84e97ab50364bc820a8f65ec63f08e0b0cd29a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1106_bc84e97ab50364bc820a8f65ec63f08e0b0cd29a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,121 @@ +commit bc84e97ab50364bc820a8f65ec63f08e0b0cd29a +Author: Noralf Trønnes +Date: Fri Sep 23 18:24:38 2016 +0200 + + i2c: bcm2835: Protect against unexpected TXW/RXR interrupts + + If an unexpected TXW or RXR interrupt occurs (msg_buf_remaining == 0), + the driver has no way to fill/drain the FIFO to stop the interrupts. + In this case the controller has to be disabled and the transfer + completed to avoid hang. + + (CLKT | ERR) and DONE interrupts are completed in their own paths, and + the controller is disabled in the transfer function after completion. + Unite the code paths and do disabling inside the interrupt routine. + + Clear interrupt status bits in the united completion path instead of + trying to do it on every interrupt which isn't necessary. + Only CLKT, ERR and DONE can be cleared that way. + + Add the status value to the error value in case of TXW/RXR errors to + distinguish them from the other S_LEN error. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index f283b714aa79..d2ba1a4de36a 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -50,8 +50,6 @@ + #define BCM2835_I2C_S_CLKT BIT(9) + #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */ + +-#define BCM2835_I2C_BITMSK_S 0x03FF +- + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + +@@ -111,20 +109,26 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev) + } + } + ++/* ++ * Note about I2C_C_CLEAR on error: ++ * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in ++ * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through ++ * the state machine to send a NACK and a STOP. Since we're setting CLEAR ++ * without I2CEN, that NACK will be hanging around queued up for next time ++ * we start the engine. ++ */ ++ + static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + { + struct bcm2835_i2c_dev *i2c_dev = data; + u32 val, err; + + val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); +- val &= BCM2835_I2C_BITMSK_S; +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val); + + err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); + if (err) { + i2c_dev->msg_err = err; +- complete(&i2c_dev->completion); +- return IRQ_HANDLED; ++ goto complete; + } + + if (val & BCM2835_I2C_S_DONE) { +@@ -137,21 +141,38 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + i2c_dev->msg_err = BCM2835_I2C_S_LEN; + else + i2c_dev->msg_err = 0; +- complete(&i2c_dev->completion); +- return IRQ_HANDLED; ++ goto complete; + } + + if (val & BCM2835_I2C_S_TXW) { ++ if (!i2c_dev->msg_buf_remaining) { ++ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; ++ goto complete; ++ } ++ + bcm2835_fill_txfifo(i2c_dev); + return IRQ_HANDLED; + } + + if (val & BCM2835_I2C_S_RXR) { ++ if (!i2c_dev->msg_buf_remaining) { ++ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; ++ goto complete; ++ } ++ + bcm2835_drain_rxfifo(i2c_dev); + return IRQ_HANDLED; + } + + return IRQ_NONE; ++ ++complete: ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, BCM2835_I2C_S_CLKT | ++ BCM2835_I2C_S_ERR | BCM2835_I2C_S_DONE); ++ complete(&i2c_dev->completion); ++ ++ return IRQ_HANDLED; + } + + static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, +@@ -181,8 +202,9 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + BCM2835_I2C_TIMEOUT); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); + if (!time_left) { ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, ++ BCM2835_I2C_C_CLEAR); + dev_err(i2c_dev->dev, "i2c transfer timed out\n"); + return -ETIMEDOUT; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1107_6a4db7770cb03ad8b5037b6fd316441daa110d20.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1107_6a4db7770cb03ad8b5037b6fd316441daa110d20.patch --- linux-4.9.13/debian/patches/rpi/rpi_1107_6a4db7770cb03ad8b5037b6fd316441daa110d20.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1107_6a4db7770cb03ad8b5037b6fd316441daa110d20.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,29 @@ +commit 6a4db7770cb03ad8b5037b6fd316441daa110d20 +Author: Noralf Trønnes +Date: Mon Sep 19 17:19:41 2016 +0200 + + i2c: bcm2835: Use dev_dbg logging on transfer errors + + Writing to an AT24C32 generates on average 2x i2c transfer errors per + 32-byte page write. Which amounts to a lot for a 4k write. This is due + to the fact that the chip doesn't respond during it's internal write + cycle when the at24 driver tries and retries the next write. + Only a handful drivers use dev_err() on transfer error, so switch to + dev_dbg() instead. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index d2ba1a4de36a..54d510abd46a 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -216,7 +216,7 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, + (msg->flags & I2C_M_IGNORE_NAK)) + return 0; + +- dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); ++ dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1108_7525bb801d67bffc6a527c491085813bcbc65ec4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1108_7525bb801d67bffc6a527c491085813bcbc65ec4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1108_7525bb801d67bffc6a527c491085813bcbc65ec4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1108_7525bb801d67bffc6a527c491085813bcbc65ec4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,41 @@ +commit 7525bb801d67bffc6a527c491085813bcbc65ec4 +Author: Noralf Trønnes +Date: Thu Sep 22 22:05:50 2016 +0200 + + i2c: bcm2835: Can't support I2C_M_IGNORE_NAK + + The controller can't support this flag, so remove it. + + Documentation/i2c/i2c-protocol states that all of the message is sent: + + I2C_M_IGNORE_NAK: + Normally message is interrupted immediately if there is [NA] from the + client. Setting this flag treats any [NA] as [A], and all of + message is sent. + + From the BCM2835 ARM Peripherals datasheet: + + The ERR field is set when the slave fails to acknowledge either + its address or a data byte written to it. + + So when the controller doesn't receive an ack, it sets ERR and raises + an interrupt. In other words, the whole message is not sent. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index 54d510abd46a..565ef69ce614 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -212,10 +212,6 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, + if (likely(!i2c_dev->msg_err)) + return 0; + +- if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) && +- (msg->flags & I2C_M_IGNORE_NAK)) +- return 0; +- + dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1109_59c872a5840065303e70405519ab7ee781978ca5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1109_59c872a5840065303e70405519ab7ee781978ca5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1109_59c872a5840065303e70405519ab7ee781978ca5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1109_59c872a5840065303e70405519ab7ee781978ca5.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,178 @@ +commit 59c872a5840065303e70405519ab7ee781978ca5 +Author: Noralf Trønnes +Date: Fri Sep 23 04:54:27 2016 +0200 + + i2c: bcm2835: Add support for Repeated Start Condition + + Documentation/i2c/i2c-protocol states that Combined transactions should + separate messages with a Start bit and end the whole transaction with a + Stop bit. This patch adds support for issuing only a Start between + messages instead of a Stop followed by a Start. + + This implementation differs from downstream i2c-bcm2708 in 2 respects: + - it uses an interrupt to detect that the transfer is active instead + of using polling. There is no interrupt for Transfer Active, but by + not prefilling the FIFO it's possible to use the TXW interrupt. + - when resetting/disabling the controller between transfers it writes + CLEAR to the control register instead of just zero. + Using just zero gave many errors. This might be the reason why + downstream had to disable this feature and make it available with a + module parameter. + + I have run thousands of transfers to a DS1307 (rtc), MMA8451 (accel) + and AT24C32 (eeprom) in parallel without problems. + + Signed-off-by: Noralf Trønnes + Acked-by: Eric Anholt + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index 565ef69ce614..241e08ae7c27 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -63,6 +63,7 @@ struct bcm2835_i2c_dev { + struct i2c_adapter adapter; + struct completion completion; + struct i2c_msg *curr_msg; ++ int num_msgs; + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; +@@ -110,6 +111,45 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev) + } + + /* ++ * Repeated Start Condition (Sr) ++ * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it ++ * talks about reading from a slave with 10 bit address. This is achieved by ++ * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then ++ * issue a read. ++ * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the ++ * firmware actually does it using polling and says that it's a workaround for ++ * a problem in the state machine. ++ * It turns out that it is possible to use the TXW interrupt to know when the ++ * transfer is active, provided the FIFO has not been prefilled. ++ */ ++ ++static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ u32 c = BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN; ++ struct i2c_msg *msg = i2c_dev->curr_msg; ++ bool last_msg = (i2c_dev->num_msgs == 1); ++ ++ if (!i2c_dev->num_msgs) ++ return; ++ ++ i2c_dev->num_msgs--; ++ i2c_dev->msg_buf = msg->buf; ++ i2c_dev->msg_buf_remaining = msg->len; ++ ++ if (msg->flags & I2C_M_RD) ++ c |= BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; ++ else ++ c |= BCM2835_I2C_C_INTT; ++ ++ if (last_msg) ++ c |= BCM2835_I2C_C_INTD; ++ ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++} ++ ++/* + * Note about I2C_C_CLEAR on error: + * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in + * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through +@@ -151,6 +191,12 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + } + + bcm2835_fill_txfifo(i2c_dev); ++ ++ if (i2c_dev->num_msgs && !i2c_dev->msg_buf_remaining) { ++ i2c_dev->curr_msg++; ++ bcm2835_i2c_start_transfer(i2c_dev); ++ } ++ + return IRQ_HANDLED; + } + +@@ -175,30 +221,25 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + return IRQ_HANDLED; + } + +-static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, +- struct i2c_msg *msg) ++static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ++ int num) + { +- u32 c; ++ struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + unsigned long time_left; ++ int i; + +- i2c_dev->curr_msg = msg; +- i2c_dev->msg_buf = msg->buf; +- i2c_dev->msg_buf_remaining = msg->len; +- reinit_completion(&i2c_dev->completion); +- +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); ++ for (i = 0; i < (num - 1); i++) ++ if (msgs[i].flags & I2C_M_RD) { ++ dev_warn_once(i2c_dev->dev, ++ "only one read message supported, has to be last\n"); ++ return -EOPNOTSUPP; ++ } + +- if (msg->flags & I2C_M_RD) { +- c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; +- } else { +- c = BCM2835_I2C_C_INTT; +- bcm2835_fill_txfifo(i2c_dev); +- } +- c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN; ++ i2c_dev->curr_msg = msgs; ++ i2c_dev->num_msgs = num; ++ reinit_completion(&i2c_dev->completion); + +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++ bcm2835_i2c_start_transfer(i2c_dev); + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + BCM2835_I2C_TIMEOUT); +@@ -209,31 +250,15 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, + return -ETIMEDOUT; + } + +- if (likely(!i2c_dev->msg_err)) +- return 0; ++ if (!i2c_dev->msg_err) ++ return num; + + dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; +- else +- return -EIO; +-} +- +-static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], +- int num) +-{ +- struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); +- int i; +- int ret = 0; +- +- for (i = 0; i < num; i++) { +- ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]); +- if (ret) +- break; +- } + +- return ret ?: i; ++ return -EIO; + } + + static u32 bcm2835_i2c_func(struct i2c_adapter *adap) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1110_3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1110_3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff.patch --- linux-4.9.13/debian/patches/rpi/rpi_1110_3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1110_3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,34 @@ +commit 3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff +Author: Noralf Trønnes +Date: Fri Sep 23 04:57:17 2016 +0200 + + i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT + + Use i2c_adapter->timeout for the completion timeout value. The core + default is 1 second. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Eric Anholt + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index 241e08ae7c27..d2085dd3742e 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -53,8 +53,6 @@ + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + +-#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000)) +- + struct bcm2835_i2c_dev { + struct device *dev; + void __iomem *regs; +@@ -242,7 +240,7 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + bcm2835_i2c_start_transfer(i2c_dev); + + time_left = wait_for_completion_timeout(&i2c_dev->completion, +- BCM2835_I2C_TIMEOUT); ++ adap->timeout); + if (!time_left) { + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, + BCM2835_I2C_C_CLEAR); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1111_6add8982bbdb4e405724edd40e79fbaece05f3bd.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1111_6add8982bbdb4e405724edd40e79fbaece05f3bd.patch --- linux-4.9.13/debian/patches/rpi/rpi_1111_6add8982bbdb4e405724edd40e79fbaece05f3bd.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1111_6add8982bbdb4e405724edd40e79fbaece05f3bd.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,113 @@ +commit 6add8982bbdb4e405724edd40e79fbaece05f3bd +Author: Noralf Trønnes +Date: Tue Sep 27 01:00:08 2016 +0200 + + i2c: bcm2835: Add support for dynamic clock + + Support a dynamic clock by reading the frequency and setting the + divisor in the transfer function instead of during probe. + + Signed-off-by: Noralf Trønnes + Reviewed-by: Martin Sperl + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index d2085dd3742e..c3436f627028 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -58,6 +58,7 @@ struct bcm2835_i2c_dev { + void __iomem *regs; + struct clk *clk; + int irq; ++ u32 bus_clk_rate; + struct i2c_adapter adapter; + struct completion completion; + struct i2c_msg *curr_msg; +@@ -78,6 +79,30 @@ static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg) + return readl(i2c_dev->regs + reg); + } + ++static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ u32 divider; ++ ++ divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), ++ i2c_dev->bus_clk_rate); ++ /* ++ * Per the datasheet, the register is always interpreted as an even ++ * number, by rounding down. In other words, the LSB is ignored. So, ++ * if the LSB is set, increment the divider to avoid any issue. ++ */ ++ if (divider & 1) ++ divider++; ++ if ((divider < BCM2835_I2C_CDIV_MIN) || ++ (divider > BCM2835_I2C_CDIV_MAX)) { ++ dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); ++ return -EINVAL; ++ } ++ ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); ++ ++ return 0; ++} ++ + static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) + { + u32 val; +@@ -224,7 +249,7 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + { + struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + unsigned long time_left; +- int i; ++ int i, ret; + + for (i = 0; i < (num - 1); i++) + if (msgs[i].flags & I2C_M_RD) { +@@ -233,6 +258,10 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + return -EOPNOTSUPP; + } + ++ ret = bcm2835_i2c_set_divider(i2c_dev); ++ if (ret) ++ return ret; ++ + i2c_dev->curr_msg = msgs; + i2c_dev->num_msgs = num; + reinit_completion(&i2c_dev->completion); +@@ -282,7 +311,6 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) + { + struct bcm2835_i2c_dev *i2c_dev; + struct resource *mem, *irq; +- u32 bus_clk_rate, divider; + int ret; + struct i2c_adapter *adap; + +@@ -306,27 +334,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) + } + + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", +- &bus_clk_rate); ++ &i2c_dev->bus_clk_rate); + if (ret < 0) { + dev_warn(&pdev->dev, + "Could not read clock-frequency property\n"); +- bus_clk_rate = 100000; +- } +- +- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate); +- /* +- * Per the datasheet, the register is always interpreted as an even +- * number, by rounding down. In other words, the LSB is ignored. So, +- * if the LSB is set, increment the divider to avoid any issue. +- */ +- if (divider & 1) +- divider++; +- if ((divider < BCM2835_I2C_CDIV_MIN) || +- (divider > BCM2835_I2C_CDIV_MAX)) { +- dev_err(&pdev->dev, "Invalid clock-frequency\n"); +- return -ENODEV; ++ i2c_dev->bus_clk_rate = 100000; + } +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1112_f4ed4ec2ac59b926bd9c37e0cc32cec712b53087.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1112_f4ed4ec2ac59b926bd9c37e0cc32cec712b53087.patch --- linux-4.9.13/debian/patches/rpi/rpi_1112_f4ed4ec2ac59b926bd9c37e0cc32cec712b53087.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1112_f4ed4ec2ac59b926bd9c37e0cc32cec712b53087.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,186 @@ +commit f4ed4ec2ac59b926bd9c37e0cc32cec712b53087 +Author: Noralf Trønnes +Date: Tue Nov 1 15:15:41 2016 +0100 + + i2c: bcm2835: Add debug support + + This adds a debug module parameter to aid in debugging transfer issues + by printing info to the kernel log. When enabled, status values are + collected in the interrupt routine and msg info in + bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid + affecting timing. Having printk in the isr can mask issues. + + debug values (additive): + 1: Print info on error + 2: Print info on all transfers + 3: Print messages before transfer is started + + The value can be changed at runtime: + /sys/module/i2c_bcm2835/parameters/debug + + Example output, debug=3: + [ 747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] + [ 747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] + [ 747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] + [ 747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE [i2c1] + [ 747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] + [ 747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD [i2c1] + [ 747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD [i2c1] + [ 747.117870] isr: remain=8, status=0x32 : DONE TXD RXD [i2c1] + + Signed-off-by: Noralf Trønnes + +diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c +index c3436f627028..8642f580ce41 100644 +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -53,6 +53,18 @@ + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + ++static unsigned int debug; ++module_param(debug, uint, 0644); ++MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer"); ++ ++#define BCM2835_DEBUG_MAX 512 ++struct bcm2835_debug { ++ struct i2c_msg *msg; ++ int msg_idx; ++ size_t remain; ++ u32 status; ++}; ++ + struct bcm2835_i2c_dev { + struct device *dev; + void __iomem *regs; +@@ -66,8 +78,78 @@ struct bcm2835_i2c_dev { + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; ++ struct bcm2835_debug debug[BCM2835_DEBUG_MAX]; ++ unsigned int debug_num; ++ unsigned int debug_num_msgs; + }; + ++static inline void bcm2835_debug_add(struct bcm2835_i2c_dev *i2c_dev, u32 s) ++{ ++ if (!i2c_dev->debug_num_msgs || i2c_dev->debug_num >= BCM2835_DEBUG_MAX) ++ return; ++ ++ i2c_dev->debug[i2c_dev->debug_num].msg = i2c_dev->curr_msg; ++ i2c_dev->debug[i2c_dev->debug_num].msg_idx = ++ i2c_dev->debug_num_msgs - i2c_dev->num_msgs; ++ i2c_dev->debug[i2c_dev->debug_num].remain = i2c_dev->msg_buf_remaining; ++ i2c_dev->debug[i2c_dev->debug_num].status = s; ++ i2c_dev->debug_num++; ++} ++ ++static void bcm2835_debug_print_status(struct bcm2835_i2c_dev *i2c_dev, ++ struct bcm2835_debug *d) ++{ ++ u32 s = d->status; ++ ++ pr_info("isr: remain=%zu, status=0x%x : %s%s%s%s%s%s%s%s%s%s [i2c%d]\n", ++ d->remain, s, ++ s & BCM2835_I2C_S_TA ? "TA " : "", ++ s & BCM2835_I2C_S_DONE ? "DONE " : "", ++ s & BCM2835_I2C_S_TXW ? "TXW " : "", ++ s & BCM2835_I2C_S_RXR ? "RXR " : "", ++ s & BCM2835_I2C_S_TXD ? "TXD " : "", ++ s & BCM2835_I2C_S_RXD ? "RXD " : "", ++ s & BCM2835_I2C_S_TXE ? "TXE " : "", ++ s & BCM2835_I2C_S_RXF ? "RXF " : "", ++ s & BCM2835_I2C_S_ERR ? "ERR " : "", ++ s & BCM2835_I2C_S_CLKT ? "CLKT " : "", ++ i2c_dev->adapter.nr); ++} ++ ++static void bcm2835_debug_print_msg(struct bcm2835_i2c_dev *i2c_dev, ++ struct i2c_msg *msg, int i, int total, ++ const char *fname) ++{ ++ pr_info("%s: msg(%d/%d) %s addr=0x%02x, len=%u flags=%s%s%s%s%s%s%s [i2c%d]\n", ++ fname, i, total, ++ msg->flags & I2C_M_RD ? "read" : "write", msg->addr, msg->len, ++ msg->flags & I2C_M_TEN ? "TEN" : "", ++ msg->flags & I2C_M_RECV_LEN ? "RECV_LEN" : "", ++ msg->flags & I2C_M_NO_RD_ACK ? "NO_RD_ACK" : "", ++ msg->flags & I2C_M_IGNORE_NAK ? "IGNORE_NAK" : "", ++ msg->flags & I2C_M_REV_DIR_ADDR ? "REV_DIR_ADDR" : "", ++ msg->flags & I2C_M_NOSTART ? "NOSTART" : "", ++ msg->flags & I2C_M_STOP ? "STOP" : "", ++ i2c_dev->adapter.nr); ++} ++ ++static void bcm2835_debug_print(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ struct bcm2835_debug *d; ++ unsigned int i; ++ ++ for (i = 0; i < i2c_dev->debug_num; i++) { ++ d = &i2c_dev->debug[i]; ++ if (d->status == ~0) ++ bcm2835_debug_print_msg(i2c_dev, d->msg, d->msg_idx, ++ i2c_dev->debug_num_msgs, "start_transfer"); ++ else ++ bcm2835_debug_print_status(i2c_dev, d); ++ } ++ if (i2c_dev->debug_num >= BCM2835_DEBUG_MAX) ++ pr_info("BCM2835_DEBUG_MAX reached\n"); ++} ++ + static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev, + u32 reg, u32 val) + { +@@ -170,6 +252,7 @@ static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev) + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++ bcm2835_debug_add(i2c_dev, ~0); + } + + /* +@@ -187,6 +270,7 @@ static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + u32 val, err; + + val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); ++ bcm2835_debug_add(i2c_dev, val); + + err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); + if (err) { +@@ -251,6 +335,13 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + unsigned long time_left; + int i, ret; + ++ if (debug) ++ i2c_dev->debug_num_msgs = num; ++ ++ if (debug > 2) ++ for (i = 0; i < num; i++) ++ bcm2835_debug_print_msg(i2c_dev, &msgs[i], i + 1, num, __func__); ++ + for (i = 0; i < (num - 1); i++) + if (msgs[i].flags & I2C_M_RD) { + dev_warn_once(i2c_dev->dev, +@@ -270,6 +361,10 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + adap->timeout); ++ if (debug > 1 || (debug && (!time_left || i2c_dev->msg_err))) ++ bcm2835_debug_print(i2c_dev); ++ i2c_dev->debug_num_msgs = 0; ++ i2c_dev->debug_num = 0; + if (!time_left) { + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, + BCM2835_I2C_C_CLEAR); +@@ -280,7 +375,9 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + if (!i2c_dev->msg_err) + return num; + +- dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); ++ if (debug) ++ dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", ++ i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1113_81b71926505e981ca56b1e2dd78501272091638c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1113_81b71926505e981ca56b1e2dd78501272091638c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1113_81b71926505e981ca56b1e2dd78501272091638c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1113_81b71926505e981ca56b1e2dd78501272091638c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,15 @@ +commit 81b71926505e981ca56b1e2dd78501272091638c +Author: popcornmix +Date: Sat Dec 31 14:15:50 2016 +0000 + + arm64: Add CONFIG_ARCH_BCM2835 + +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index d7406f5a4620..53da5c7a33e5 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -1332,3 +1332,4 @@ CONFIG_ARM64_CRYPTO=y + CONFIG_CRC_ITU_T=y + CONFIG_LIBCRC32C=y + CONFIG_BCM2708_VCHIQ=n ++CONFIG_ARCH_BCM2835=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1114_adc42cf3af4ac76b4447c33654d1b7050ca1352e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1114_adc42cf3af4ac76b4447c33654d1b7050ca1352e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1114_adc42cf3af4ac76b4447c33654d1b7050ca1352e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1114_adc42cf3af4ac76b4447c33654d1b7050ca1352e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,73 @@ +commit adc42cf3af4ac76b4447c33654d1b7050ca1352e +Author: Alex Tucker +Date: Tue Dec 13 19:50:18 2016 +0000 + + Add support for Silicon Labs Si7013/20/21 humidity/temperature sensor. + +diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +index f6d134c095af..31bda8da4cb6 100644 +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -1,34 +1,41 @@ +-// Definitions for a few digital barometric pressure and temperature sensors ++// Definitions for I2C based sensors using the Industrial IO interface. + /dts-v1/; + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2708"; + +- fragment@0 { +- target = <&i2c_arm>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; + +- bmp085: bmp085@77 { +- compatible = "bosch,bmp085"; +- reg = <0x77>; +- default-oversampling = <3>; +- status = "disable"; +- }; ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; + +- bmp280: bmp280@76 { +- compatible = "bosch,bmp280"; +- reg = <0x76>; +- status = "disable"; +- }; +- }; +- }; ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ ++ si7020: si7020@40 { ++ compatible = "si7020"; ++ reg = <0x40>; ++ status = "disable"; ++ }; ++ }; ++ }; + + __overrides__ { + bmp085 = <&bmp085>,"status"; + bmp280 = <&bmp280>,"status"; ++ si7020 = <&si7020>,"status"; + }; + }; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1115_44da1400299ada40a33494fa9f22f974dddbe537.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1115_44da1400299ada40a33494fa9f22f974dddbe537.patch --- linux-4.9.13/debian/patches/rpi/rpi_1115_44da1400299ada40a33494fa9f22f974dddbe537.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1115_44da1400299ada40a33494fa9f22f974dddbe537.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,20 @@ +commit 44da1400299ada40a33494fa9f22f974dddbe537 +Author: Phil Elwell +Date: Tue Jan 3 21:27:46 2017 +0000 + + Document the si7020 option + +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 81d991803be3..e8fa4ccb44c3 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -549,6 +549,9 @@ Params: bmp085 Select the Bosch sensortronic BMP085 + + bmp280 Select the Bosch sensortronic BMP280 + ++ si7020 Select the Silicon Labs Si7013/20/21 humidity/ ++ temperature sensor ++ + + Name: i2c0-bcm2708 + Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1116_1201aba920851084a7549a03b0faf62903ec846b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1116_1201aba920851084a7549a03b0faf62903ec846b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1116_1201aba920851084a7549a03b0faf62903ec846b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1116_1201aba920851084a7549a03b0faf62903ec846b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,294 @@ +commit 1201aba920851084a7549a03b0faf62903ec846b +Author: Giedrius Trainavicius +Date: Thu Jan 5 02:38:16 2017 +0200 + + pisound improvements: + + * Added a writable sysfs object to enable scripts / user space software + to blink MIDI activity LEDs for variable duration. + * Improved hw_param constraints setting. + * Added compatibility with S16_LE sample format. + * Exposed some simple placeholder volume controls, so the card appears + in volumealsa widget. + + Signed-off-by: Giedrius Trainavicius + +diff --git a/sound/soc/bcm/pisound.c b/sound/soc/bcm/pisound.c +index 4b8545487d06..ba70734b89e6 100644 +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + static int pisnd_spi_init(struct device *dev); + static void pisnd_spi_uninit(void); +@@ -214,6 +215,9 @@ static char g_serial_num[11]; + static char g_id[25]; + static char g_version[5]; + ++static uint8_t g_ledFlashDuration; ++static bool g_ledFlashDurationChanged; ++ + DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); + DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); + +@@ -396,8 +400,13 @@ static void pisnd_work_handler(struct work_struct *work) + val = 0; + tx = 0; + +- if (kfifo_get(&spi_fifo_out, &val)) ++ if (g_ledFlashDurationChanged) { ++ tx = 0xf000 | g_ledFlashDuration; ++ g_ledFlashDuration = 0; ++ g_ledFlashDurationChanged = false; ++ } else if (kfifo_get(&spi_fifo_out, &val)) { + tx = 0x0f00 | val; ++ } + + rx = spi_transfer16(tx); + +@@ -410,6 +419,7 @@ static void pisnd_work_handler(struct work_struct *work) + } while (rx != 0 + || !kfifo_is_empty(&spi_fifo_out) + || pisnd_spi_has_more() ++ || g_ledFlashDurationChanged + ); + + if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) +@@ -569,7 +579,7 @@ static int pisnd_spi_init(struct device *dev) + } + + /* Flash the LEDs. */ +- spi_transfer16(0xf000); ++ spi_transfer16(0xf008); + + ret = pisnd_spi_gpio_irq_init(dev); + if (ret < 0) { +@@ -610,6 +620,14 @@ static void pisnd_spi_uninit(void) + pisnd_spi_gpio_uninit(); + } + ++static void pisnd_spi_flash_leds(uint8_t duration) ++{ ++ g_ledFlashDuration = duration; ++ g_ledFlashDurationChanged = true; ++ printd("schedule from spi_flash_leds\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++} ++ + static void pisnd_spi_send(uint8_t val) + { + kfifo_put(&spi_fifo_out, val); +@@ -658,6 +676,83 @@ static const struct of_device_id pisound_of_match[] = { + {}, + }; + ++enum { ++ SWITCH = 0, ++ VOLUME = 1, ++}; ++ ++static int pisnd_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 100; ++ return 0; ++ } ++ return -EINVAL; ++} ++ ++static int pisnd_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ ucontrol->value.integer.value[0] = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ ucontrol->value.integer.value[0] = 100; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static struct snd_kcontrol_new pisnd_ctl[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .private_value = SWITCH, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .private_value = VOLUME, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++}; ++ ++static int pisnd_ctl_init(struct snd_card *card) ++{ ++ int err, i; ++ ++ for (i = 0; i < ARRAY_SIZE(pisnd_ctl); ++i) { ++ err = snd_ctl_add(card, snd_ctl_new1(&pisnd_ctl[i], NULL)); ++ if (err < 0) ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int pisnd_ctl_uninit(void) ++{ ++ return 0; ++} ++ + static struct gpio_desc *osr0, *osr1, *osr2; + static struct gpio_desc *reset; + static struct gpio_desc *button; +@@ -667,6 +762,14 @@ static int pisnd_hw_params( + struct snd_pcm_hw_params *params + ) + { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ /* pisound runs on fixed 32 clock counts per channel, ++ * as generated by the master ADC. ++ */ ++ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++ + printd("rate = %d\n", params_rate(params)); + printd("ch = %d\n", params_channels(params)); + printd("bits = %u\n", +@@ -711,16 +814,6 @@ static struct snd_pcm_hw_constraint_list constraints_rates = { + .mask = 0, + }; + +-static unsigned int sample_bits[] = { +- 24, 32 +-}; +- +-static struct snd_pcm_hw_constraint_list constraints_sample_bits = { +- .count = ARRAY_SIZE(sample_bits), +- .list = sample_bits, +- .mask = 0, +-}; +- + static int pisnd_startup(struct snd_pcm_substream *substream) + { + int err = snd_pcm_hw_constraint_list( +@@ -733,11 +826,21 @@ static int pisnd_startup(struct snd_pcm_substream *substream) + if (err < 0) + return err; + +- err = snd_pcm_hw_constraint_list( ++ err = snd_pcm_hw_constraint_single( + substream->runtime, +- 0, +- SNDRV_PCM_HW_PARAM_SAMPLE_BITS, +- &constraints_sample_bits ++ SNDRV_PCM_HW_PARAM_CHANNELS, ++ 2 ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ err = snd_pcm_hw_constraint_mask64( ++ substream->runtime, ++ SNDRV_PCM_HW_PARAM_FORMAT, ++ SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE | ++ SNDRV_PCM_FMTBIT_S32_LE + ); + + if (err < 0) +@@ -771,14 +874,23 @@ static int pisnd_card_probe(struct snd_soc_card *card) + { + int err = pisnd_midi_init(card->snd_card); + +- if (err < 0) ++ if (err < 0) { + printe("pisnd_midi_init failed: %d\n", err); ++ return err; ++ } + +- return err; ++ err = pisnd_ctl_init(card->snd_card); ++ if (err < 0) { ++ printe("pisnd_ctl_init failed: %d\n", err); ++ return err; ++ } ++ ++ return 0; + } + + static int pisnd_card_remove(struct snd_soc_card *card) + { ++ pisnd_ctl_uninit(); + pisnd_midi_uninit(); + return 0; + } +@@ -870,17 +982,38 @@ static ssize_t pisnd_version_show( + return sprintf(buf, "%s\n", pisnd_spi_get_version()); + } + ++static ssize_t pisnd_led_store( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ const char *buf, ++ size_t length ++ ) ++{ ++ uint32_t timeout; ++ int err; ++ ++ err = kstrtou32(buf, 10, &timeout); ++ ++ if (err == 0 && timeout <= 255) ++ pisnd_spi_flash_leds(timeout); ++ ++ return length; ++} ++ + static struct kobj_attribute pisnd_serial_attribute = +- __ATTR(serial, 0644, pisnd_serial_show, NULL); ++ __ATTR(serial, 0444, pisnd_serial_show, NULL); + static struct kobj_attribute pisnd_id_attribute = +- __ATTR(id, 0644, pisnd_id_show, NULL); ++ __ATTR(id, 0444, pisnd_id_show, NULL); + static struct kobj_attribute pisnd_version_attribute = +- __ATTR(version, 0644, pisnd_version_show, NULL); ++ __ATTR(version, 0444, pisnd_version_show, NULL); ++static struct kobj_attribute pisnd_led_attribute = ++ __ATTR(led, 0644, NULL, pisnd_led_store); + + static struct attribute *attrs[] = { + &pisnd_serial_attribute.attr, + &pisnd_id_attribute.attr, + &pisnd_version_attribute.attr, ++ &pisnd_led_attribute.attr, + NULL + }; + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1117_df80a91297eea9dd8ec5e6930a9a0be65c4455c3.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1117_df80a91297eea9dd8ec5e6930a9a0be65c4455c3.patch --- linux-4.9.13/debian/patches/rpi/rpi_1117_df80a91297eea9dd8ec5e6930a9a0be65c4455c3.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1117_df80a91297eea9dd8ec5e6930a9a0be65c4455c3.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,20 @@ +commit df80a91297eea9dd8ec5e6930a9a0be65c4455c3 +Author: Aaron Shaw +Date: Tue Jan 10 16:05:41 2017 +0000 + + Add driver_name property + + Add driver name property for use with 5.1 passthrough audio in LibreElec and other Kodi based OSs + +diff --git a/sound/soc/bcm/justboom-dac.c b/sound/soc/bcm/justboom-dac.c +index 8fd50dbe6815..05a224ec712d 100644 +--- a/sound/soc/bcm/justboom-dac.c ++++ b/sound/soc/bcm/justboom-dac.c +@@ -98,6 +98,7 @@ static struct snd_soc_dai_link snd_rpi_justboom_dac_dai[] = { + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_dac = { + .name = "snd_rpi_justboom_dac", ++ .driver_name = "JustBoomDac", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_dac_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1118_ddee3833978f0633ffbd68c2f0b20d4bfb2398f2.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1118_ddee3833978f0633ffbd68c2f0b20d4bfb2398f2.patch --- linux-4.9.13/debian/patches/rpi/rpi_1118_ddee3833978f0633ffbd68c2f0b20d4bfb2398f2.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1118_ddee3833978f0633ffbd68c2f0b20d4bfb2398f2.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,20 @@ +commit ddee3833978f0633ffbd68c2f0b20d4bfb2398f2 +Author: Aaron Shaw +Date: Tue Jan 10 16:11:04 2017 +0000 + + Add driver_name paramater + + Add driver_name parameter for use with 5.1 passthrough audio in LibreElec and other Kodi OSs + +diff --git a/sound/soc/bcm/justboom-digi.c b/sound/soc/bcm/justboom-digi.c +index 91acb666380f..abfdc5c4dd58 100644 +--- a/sound/soc/bcm/justboom-digi.c ++++ b/sound/soc/bcm/justboom-digi.c +@@ -154,6 +154,7 @@ static struct snd_soc_dai_link snd_rpi_justboom_digi_dai[] = { + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_digi = { + .name = "snd_rpi_justboom_digi", ++ .driver_name = "JustBoomDigi", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_digi_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1119_2c85961abdcea5163968140535e169072e2a3e12.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1119_2c85961abdcea5163968140535e169072e2a3e12.patch --- linux-4.9.13/debian/patches/rpi/rpi_1119_2c85961abdcea5163968140535e169072e2a3e12.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1119_2c85961abdcea5163968140535e169072e2a3e12.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,58 @@ +commit 2c85961abdcea5163968140535e169072e2a3e12 +Author: Phil Elwell +Date: Wed Jan 11 13:01:21 2017 +0000 + + BCM270X_DT: Add pi3-disable-wifi overlay + + pi3-disable-wifi is a minimal overlay to disable the onboard WiFi. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 11dba3171284..f1191c1ded82 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -51,6 +51,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mz61581.dtbo \ + pi3-act-led.dtbo \ + pi3-disable-bt.dtbo \ ++ pi3-disable-wifi.dtbo \ + pi3-miniuart-bt.dtbo \ + piscreen.dtbo \ + piscreen2r.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index e8fa4ccb44c3..34109c69416c 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -800,6 +800,12 @@ Load: dtoverlay=pi3-disable-bt + Params: + + ++Name: pi3-disable-wifi ++Info: Disable Pi3 onboard WiFi ++Load: dtoverlay=pi3-disable-wifi ++Params: ++ ++ + Name: pi3-miniuart-bt + Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +diff --git a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +new file mode 100644 +index 000000000000..017199554bf2 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -0,0 +1,13 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1120_d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1120_d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1120_d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1120_d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,393 @@ +commit d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1 +Author: Electron752 +Date: Thu Jan 12 07:07:08 2017 -0800 + + ARM64: Make it work again on 4.9 (#1790) + + * Invoke the dtc compiler with the same options used in arm mode. + * ARM64 now uses the bcm2835 platform just like ARM32. + * ARM64: Update bcmrpi3_defconfig + + Signed-off-by: Michael Zoran + +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 7d213c2c9042..101794f5ce10 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,27 +1,5 @@ + menu "Platform selection" + +-config MACH_BCM2709 +- bool +- +-config ARCH_BCM2709 +- bool "Broadcom BCM2709 family" +- select MACH_BCM2709 +- select HAVE_SMP +- select ARM_AMBA +- select COMMON_CLK +- select ARCH_HAS_CPUFREQ +- select GENERIC_CLOCKEVENTS +- select MULTI_IRQ_HANDLER +- select SPARSE_IRQ +- select MFD_SYSCON +- select VC4 +- select USE_OF +- select ARCH_REQUIRE_GPIOLIB +- select PINCTRL +- select PINCTRL_BCM2835 +- help +- This enables support for Broadcom BCM2709 boards. +- + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select GENERIC_IRQ_CHIP +diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile +index 2152448c8cf5..7aa03be73fda 100644 +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,7 +1,15 @@ ++# Enable fixups to support overlays on BCM2835 platforms ++ ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++DTC_FLAGS ?= -@ -H epapr ++endif ++ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb +-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb ++ ++dts-dirs += ../overlays + + always := $(dtb-y) + subdir-y := $(dts-dirs) +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 53da5c7a33e5..c7e891d72969 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -1,52 +1,9 @@ +-# CONFIG_ARM_PATCH_PHYS_VIRT is not set +-CONFIG_PHYS_OFFSET=0 + CONFIG_LOCALVERSION="-v8" + # CONFIG_LOCALVERSION_AUTO is not set +-CONFIG_64BIT=y + CONFIG_SYSVIPC=y + CONFIG_POSIX_MQUEUE=y + CONFIG_NO_HZ=y + CONFIG_HIGH_RES_TIMERS=y +- +-# +-# ARM errata workarounds via the alternatives framework +-# +-CONFIG_ARM64_ERRATUM_826319=n +-CONFIG_ARM64_ERRATUM_827319=n +-CONFIG_ARM64_ERRATUM_824069=n +-CONFIG_ARM64_ERRATUM_819472=n +-CONFIG_ARM64_ERRATUM_832075=n +-CONFIG_ARM64_ERRATUM_845719=n +-CONFIG_ARM64_ERRATUM_843419=n +-CONFIG_CAVIUM_ERRATUM_22375=n +-CONFIG_CAVIUM_ERRATUM_23154=n +-CONFIG_CAVIUM_ERRATUM_27456=n +-CONFIG_ARM64_4K_PAGES=y +-CONFIG_ARM64_VA_BITS_39=y +-CONFIG_ARM64_VA_BITS=39 +-CONFIG_SCHED_MC=y +-CONFIG_NR_CPUS=4 +-CONFIG_HOTPLUG_CPU=y +-CONFIG_ARMV8_DEPRECATED=y +-CONFIG_SWP_EMULATION=y +-CONFIG_CP15_BARRIER_EMULATION=y +-CONFIG_SETEND_EMULATION=y +- +-# +-# ARMv8.1 architectural features +-# +-CONFIG_ARM64_HW_AFDBM=y +-CONFIG_ARM64_PAN=y +-CONFIG_ARM64_LSE_ATOMICS=y +-CONFIG_ARM64_VHE=y +- +-# +-# ARMv8.2 architectural features +-# +-CONFIG_ARM64_UAO=y +-CONFIG_ARM64_MODULE_CMODEL_LARGE=n +-CONFIG_RANDOMIZE_BASE=n +- + CONFIG_BSD_PROCESS_ACCT=y + CONFIG_BSD_PROCESS_ACCT_V3=y + CONFIG_TASKSTATS=y +@@ -55,7 +12,6 @@ CONFIG_TASK_XACCT=y + CONFIG_TASK_IO_ACCOUNTING=y + CONFIG_IKCONFIG=m + CONFIG_IKCONFIG_PROC=y +-CONFIG_NMI_LOG_BUF_SHIFT=12 + CONFIG_MEMCG=y + CONFIG_BLK_CGROUP=y + CONFIG_CGROUP_FREEZER=y +@@ -69,54 +25,49 @@ CONFIG_BLK_DEV_INITRD=y + CONFIG_EMBEDDED=y + # CONFIG_COMPAT_BRK is not set + CONFIG_PROFILING=y +-CONFIG_OPROFILE=m + CONFIG_KPROBES=y + CONFIG_JUMP_LABEL=y + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y + CONFIG_MODVERSIONS=y + CONFIG_MODULE_SRCVERSION_ALL=y +-CONFIG_TRIM_UNUSED_KSYMS=y + CONFIG_BLK_DEV_THROTTLING=y + CONFIG_PARTITION_ADVANCED=y + CONFIG_MAC_PARTITION=y + CONFIG_CFQ_GROUP_IOSCHED=y +-CONFIG_ARCH_BCM2709=y +-# CONFIG_CACHE_L2X0 is not set +-CONFIG_SMP=y +-CONFIG_HAVE_ARM_ARCH_TIMER=y +-CONFIG_VMSPLIT_2G=y +-CONFIG_PREEMPT_VOLUNTARY=y +-CONFIG_AEABI=y +-CONFIG_OABI_COMPAT=y +-# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CAVIUM_ERRATUM_22375 is not set ++# CONFIG_CAVIUM_ERRATUM_23154 is not set ++# CONFIG_CAVIUM_ERRATUM_27456 is not set ++CONFIG_SCHED_MC=y ++CONFIG_NR_CPUS=4 ++CONFIG_PREEMPT=y ++CONFIG_HZ_1000=y + CONFIG_CLEANCACHE=y + CONFIG_FRONTSWAP=y + CONFIG_CMA=y + CONFIG_ZSMALLOC=m + CONFIG_PGTABLE_MAPPING=y +-CONFIG_UACCESS_WITH_MEMCPY=y + CONFIG_SECCOMP=y +-# CONFIG_ATAGS is not set +-CONFIG_ZBOOT_ROM_TEXT=0x0 +-CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_ARMV8_DEPRECATED=y ++CONFIG_SWP_EMULATION=y ++CONFIG_CP15_BARRIER_EMULATION=y ++CONFIG_SETEND_EMULATION=y + CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_BINFMT_MISC=y ++CONFIG_COMPAT=y ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_CPU_IDLE=y ++CONFIG_ARM_CPUIDLE=y + CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y + CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + CONFIG_CPU_FREQ_GOV_USERSPACE=y + CONFIG_CPU_FREQ_GOV_ONDEMAND=y + CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +-CONFIG_VFP=y +-CONFIG_NEON=y +-CONFIG_KERNEL_MODE_NEON=y +-CONFIG_BINFMT_MISC=m +-CONFIG_COMPAT=y +-CONFIG_SYSVIPC_COMPAT=y +- +-# CONFIG_SUSPEND is not set +-CONFIG_PM=y + CONFIG_NET=y + CONFIG_PACKET=y + CONFIG_UNIX=y +@@ -437,6 +388,7 @@ CONFIG_BT_MRVL=m + CONFIG_BT_MRVL_SDIO=m + CONFIG_BT_ATH3K=m + CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m + CONFIG_MAC80211=m + CONFIG_MAC80211_MESH=y + CONFIG_WIMAX=m +@@ -490,7 +442,6 @@ CONFIG_BONDING=m + CONFIG_DUMMY=m + CONFIG_IFB=m + CONFIG_MACVLAN=m +-CONFIG_IPVLAN=m + CONFIG_VXLAN=m + CONFIG_NETCONSOLE=m + CONFIG_TUN=m +@@ -579,8 +530,6 @@ CONFIG_RT2800USB_RT3573=y + CONFIG_RT2800USB_RT53XX=y + CONFIG_RT2800USB_RT55XX=y + CONFIG_RT2800USB_UNKNOWN=y +-CONFIG_RTL8187=m +-CONFIG_RTL8192CU=n + CONFIG_USB_ZD1201=m + CONFIG_ZD1211RW=m + CONFIG_MAC80211_HWSIM=m +@@ -606,7 +555,7 @@ CONFIG_JOYSTICK_RPISENSE=m + CONFIG_INPUT_TOUCHSCREEN=y + CONFIG_TOUCHSCREEN_ADS7846=m + CONFIG_TOUCHSCREEN_EGALAX=m +-CONFIG_TOUCHSCREEN_FT6236=m ++CONFIG_TOUCHSCREEN_EKTF2127=m + CONFIG_TOUCHSCREEN_RPI_FT5406=m + CONFIG_TOUCHSCREEN_USB_COMPOSITE=m + CONFIG_TOUCHSCREEN_STMPE=m +@@ -626,10 +575,8 @@ CONFIG_SERIO_RAW=m + CONFIG_GAMEPORT=m + CONFIG_GAMEPORT_NS558=m + CONFIG_GAMEPORT_L4=m +-CONFIG_BRCM_CHAR_DRIVERS=n +-CONFIG_BCM_VC_CMA=n +-CONFIG_BCM_VCIO=n +-CONFIG_BCM_VC_SM=n ++# CONFIG_BCM2835_DEVGPIOMEM is not set ++# CONFIG_BCM2835_SMI_DEV is not set + # CONFIG_LEGACY_PTYS is not set + # CONFIG_DEVKMEM is not set + CONFIG_SERIAL_8250=y +@@ -638,6 +585,9 @@ CONFIG_SERIAL_8250_CONSOLE=y + # CONFIG_SERIAL_8250_DMA is not set + CONFIG_SERIAL_8250_NR_UARTS=1 + CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y + CONFIG_SERIAL_OF_PLATFORM=y + CONFIG_SERIAL_AMBA_PL011=y + CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +@@ -650,6 +600,7 @@ CONFIG_I2C=y + CONFIG_I2C_CHARDEV=m + CONFIG_I2C_MUX_PCA954x=m + CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m + CONFIG_I2C_GPIO=m + CONFIG_SPI=y + CONFIG_SPI_BCM2835=m +@@ -681,13 +632,13 @@ CONFIG_W1_SLAVE_DS2780=m + CONFIG_W1_SLAVE_DS2781=m + CONFIG_W1_SLAVE_DS28E04=m + CONFIG_W1_SLAVE_BQ27000=m +-CONFIG_BATTERY_DS2760=m +-CONFIG_POWER_RESET=y + CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m + CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y + CONFIG_WATCHDOG=y +@@ -835,8 +786,6 @@ CONFIG_VIDEO_EM28XX_V4L2=m + CONFIG_VIDEO_EM28XX_ALSA=m + CONFIG_VIDEO_EM28XX_DVB=m + CONFIG_V4L_PLATFORM_DRIVERS=y +-CONFIG_VIDEO_BCM2835=n +-CONFIG_VIDEO_BCM2835_MMAL=n + CONFIG_RADIO_SI470X=y + CONFIG_USB_SI470X=m + CONFIG_I2C_SI470X=m +@@ -892,8 +841,6 @@ CONFIG_SND_VIRMIDI=m + CONFIG_SND_MTPAV=m + CONFIG_SND_SERIAL_U16550=m + CONFIG_SND_MPU401=m +-CONFIG_SND_ARM=n +-CONFIG_SND_BCM2835=n + CONFIG_SND_USB_AUDIO=m + CONFIG_SND_USB_UA101=m + CONFIG_SND_USB_CAIAQ=m +@@ -916,7 +863,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m + CONFIG_SOUND_PRIME=m +@@ -979,8 +929,6 @@ CONFIG_USB_HIDDEV=y + CONFIG_USB=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_MON=m +-CONFIG_USB_DWCOTG=n +-CONFIG_USB_DWC2=y + CONFIG_USB_PRINTER=m + CONFIG_USB_STORAGE=y + CONFIG_USB_STORAGE_REALTEK=m +@@ -1001,6 +949,7 @@ CONFIG_USB_MICROTEK=m + CONFIG_USBIP_CORE=m + CONFIG_USBIP_VHCI_HCD=m + CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=y + CONFIG_USB_SERIAL=m + CONFIG_USB_SERIAL_GENERIC=y + CONFIG_USB_SERIAL_AIRCABLE=m +@@ -1096,6 +1045,7 @@ CONFIG_LEDS_TRIGGER_INPUT=y + CONFIG_LEDS_TRIGGER_PANIC=y + CONFIG_RTC_CLASS=y + # CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m + CONFIG_RTC_DRV_DS1307=m + CONFIG_RTC_DRV_DS1374=m + CONFIG_RTC_DRV_DS1672=m +@@ -1103,7 +1053,6 @@ CONFIG_RTC_DRV_MAX6900=m + CONFIG_RTC_DRV_RS5C372=m + CONFIG_RTC_DRV_ISL1208=m + CONFIG_RTC_DRV_ISL12022=m +-CONFIG_RTC_DRV_ISL12057=m + CONFIG_RTC_DRV_X1205=m + CONFIG_RTC_DRV_PCF8523=m + CONFIG_RTC_DRV_PCF8563=m +@@ -1137,7 +1086,6 @@ CONFIG_STAGING=y + CONFIG_PRISM2_USB=m + CONFIG_R8712U=m + CONFIG_R8188EU=m +-CONFIG_R8723AU=m + CONFIG_VT6656=m + CONFIG_SPEAKUP=m + CONFIG_SPEAKUP_SYNTH_SOFT=m +@@ -1153,6 +1101,7 @@ CONFIG_FB_TFT_BD663474=m + CONFIG_FB_TFT_HX8340BN=m + CONFIG_FB_TFT_HX8347D=m + CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m + CONFIG_FB_TFT_ILI9163=m + CONFIG_FB_TFT_ILI9320=m + CONFIG_FB_TFT_ILI9325=m +@@ -1176,6 +1125,7 @@ CONFIG_FB_TFT_UPD161704=m + CONFIG_FB_TFT_WATTEROTT=m + CONFIG_FB_FLEX=m + CONFIG_FB_TFT_FBTFT_DEVICE=m ++# CONFIG_BCM2708_VCHIQ is not set + CONFIG_MAILBOX=y + CONFIG_BCM2835_MBOX=y + # CONFIG_IOMMU_SUPPORT is not set +@@ -1189,6 +1139,7 @@ CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m + CONFIG_MCP3422=m + CONFIG_DHT11=m ++CONFIG_HTU21=m + CONFIG_PWM_BCM2835=m + CONFIG_PWM_PCA9685=m + CONFIG_RASPBERRYPI_FIRMWARE=y +@@ -1309,6 +1260,7 @@ CONFIG_BOOT_PRINTK_DELAY=y + CONFIG_DEBUG_MEMORY_INIT=y + CONFIG_DETECT_HUNG_TASK=y + CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y + CONFIG_IRQSOFF_TRACER=y + CONFIG_SCHED_TRACER=y + CONFIG_STACK_TRACER=y +@@ -1331,5 +1283,3 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m + CONFIG_ARM64_CRYPTO=y + CONFIG_CRC_ITU_T=y + CONFIG_LIBCRC32C=y +-CONFIG_BCM2708_VCHIQ=n +-CONFIG_ARCH_BCM2835=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1121_5ee22f5464caa6ff7aaee25b235b64d5f97a594f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1121_5ee22f5464caa6ff7aaee25b235b64d5f97a594f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1121_5ee22f5464caa6ff7aaee25b235b64d5f97a594f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1121_5ee22f5464caa6ff7aaee25b235b64d5f97a594f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,31 @@ +commit 5ee22f5464caa6ff7aaee25b235b64d5f97a594f +Author: Electron752 +Date: Sat Jan 14 02:54:26 2017 -0800 + + ARM64: Enable Kernel Address Space Randomization (#1792) + + Randomization allows the mapping between virtual addresses and physical + address to be different on each boot. This makes it more difficult + to exploit security vulnerabilities that require knowledge of fixed + hardware addresses. + + The firmware generates a 8 byte random number during bootup and stores + it in the device tree under chosen/kaslr-seed. This number is used + to randomize the address mapping. + + This change enables this feature in the build configuration for ARM64. + + Signed-off-by: Michael Zoran + +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index c7e891d72969..974d8889c0cf 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -53,6 +53,7 @@ CONFIG_ARMV8_DEPRECATED=y + CONFIG_SWP_EMULATION=y + CONFIG_CP15_BARRIER_EMULATION=y + CONFIG_SETEND_EMULATION=y ++CONFIG_RANDOMIZE_BASE=y + CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" + CONFIG_BINFMT_MISC=y + CONFIG_COMPAT=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1122_c37e2a3a41e520eeb5c604796f2bc265f778caba.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1122_c37e2a3a41e520eeb5c604796f2bc265f778caba.patch --- linux-4.9.13/debian/patches/rpi/rpi_1122_c37e2a3a41e520eeb5c604796f2bc265f778caba.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1122_c37e2a3a41e520eeb5c604796f2bc265f778caba.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,33 @@ +commit c37e2a3a41e520eeb5c604796f2bc265f778caba +Author: Michael Zoran +Date: Sun Jan 15 07:25:18 2017 -0800 + + ARM64: Fix build break for RTL8187/RTL8192CU wifi + + These drivers use an ASM function from the base + system to compute the ipv6 checksum. These functions + are not available on ARM64, probably because nobody + has bother to write them. The base system does have + a generic "C" version, so a simple fix is to include + the header to use the generic version on ARM64 only. + + A longer term solution would be to submit the necessary + ASM function to the upstream source. + + With this change, these drivers now compile without + any errors on ARM64. + + Signed-off-by: Michael Zoran + +diff --git a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c +index a5ac60130a3c..39289c970543 100644 +--- a/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c ++++ b/drivers/net/wireless/realtek/rtl8192cu/core/rtw_br_ext.c +@@ -51,6 +51,7 @@ + #include + #include + #include ++#include + #endif + #endif + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1123_e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1123_e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9.patch --- linux-4.9.13/debian/patches/rpi/rpi_1123_e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1123_e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,25 @@ +commit e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9 +Author: Michael Zoran +Date: Sun Jan 15 07:31:59 2017 -0800 + + ARM64: Enable RTL8187/RTL8192CU wifi in build config + + These drivers build now, so they can be enabled back + in the build configuration just like they are for + 32 bit. + + Signed-off-by: Michael Zoran + +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 974d8889c0cf..4670a490dfb1 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -531,6 +531,8 @@ CONFIG_RT2800USB_RT3573=y + CONFIG_RT2800USB_RT53XX=y + CONFIG_RT2800USB_RT55XX=y + CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m + CONFIG_USB_ZD1201=m + CONFIG_ZD1211RW=m + CONFIG_MAC80211_HWSIM=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1124_5895e7e3fa8980e3c647cf872caf792bbe14ae43.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1124_5895e7e3fa8980e3c647cf872caf792bbe14ae43.patch --- linux-4.9.13/debian/patches/rpi/rpi_1124_5895e7e3fa8980e3c647cf872caf792bbe14ae43.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1124_5895e7e3fa8980e3c647cf872caf792bbe14ae43.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,85 @@ +commit 5895e7e3fa8980e3c647cf872caf792bbe14ae43 +Author: Phil Elwell +Date: Mon Jan 16 14:53:12 2017 +0000 + + BCM270X_DT: Add spi0-cs overlay + + The spi0-cs overlay allows the software chip selectts to be modified + using the cs0_pin and cs1_pin parameters. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index f1191c1ded82..45fafd5c39bd 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + smi-nand.dtbo \ + spi-gpio35-39.dtbo \ + spi-rtc.dtbo \ ++ spi0-cs.dtbo \ + spi0-hw-cs.dtbo \ + spi1-1cs.dtbo \ + spi1-2cs.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 34109c69416c..4992a6203a55 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1138,7 +1138,7 @@ Params: + + + Name: spi-gpio35-39 +-Info: move SPI function block to GPIO 35 to 39 ++Info: Move SPI function block to GPIO 35 to 39 + Load: dtoverlay=spi-gpio35-39 + Params: + +@@ -1149,6 +1149,13 @@ Load: dtoverlay=spi-rtc,= + Params: pcf2123 Select the PCF2123 device + + ++Name: spi0-cs ++Info: Allows the (software) CS pins for SPI0 to be changed ++Load: dtoverlay=spi0-cs,= ++Params: cs0_pin GPIO pin for CS0 (default 8) ++ cs1_pin GPIO pin for CS1 (default 7) ++ ++ + Name: spi0-hw-cs + Info: Re-enables hardware CS/CE (chip selects) for SPI0 + Load: dtoverlay=spi0-hw-cs +diff --git a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +new file mode 100644 +index 000000000000..7f79029d043c +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +@@ -0,0 +1,29 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <8 7>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0>; ++ frag1: __overlay__ { ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1125_7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1125_7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29.patch --- linux-4.9.13/debian/patches/rpi/rpi_1125_7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1125_7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,26 @@ +commit 7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29 +Author: Phil Elwell +Date: Fri Jul 1 22:09:24 2016 +0100 + + spi-bcm2835: Disable forced software CS + + Select software CS in bcm2708_common.dtsi, and disable the automatic + conversion in the driver to allow hardware CS to be re-enabled with an + overlay. + + See: https://github.com/raspberrypi/linux/issues/1547 + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 74dd21b7373c..51cdefbf5eb2 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -163,6 +163,7 @@ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; + }; + + i2c0: i2c@7e205000 { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1126_f9e171e3de0bab9feb32aedd744fe87571823fb8.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1126_f9e171e3de0bab9feb32aedd744fe87571823fb8.patch --- linux-4.9.13/debian/patches/rpi/rpi_1126_f9e171e3de0bab9feb32aedd744fe87571823fb8.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1126_f9e171e3de0bab9feb32aedd744fe87571823fb8.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,33 @@ +commit f9e171e3de0bab9feb32aedd744fe87571823fb8 +Author: popcornmix +Date: Mon Jan 16 16:33:54 2017 +0000 + + config: Add CONFIG_TCP_CONG_BBR + See: https://github.com/raspberrypi/linux/issues/1784 + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 12e8155c175d..22ade0fe5a15 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -99,6 +99,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m + CONFIG_INET_XFRM_MODE_TUNNEL=m + CONFIG_INET_XFRM_MODE_BEET=m + CONFIG_INET_DIAG=m ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BBR=m + CONFIG_IPV6=m + CONFIG_IPV6_ROUTER_PREF=y + CONFIG_INET6_AH=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 8acee9f31202..219f67051a25 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -95,6 +95,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m + CONFIG_INET_XFRM_MODE_TUNNEL=m + CONFIG_INET_XFRM_MODE_BEET=m + CONFIG_INET_DIAG=m ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BBR=m + CONFIG_IPV6=m + CONFIG_IPV6_ROUTER_PREF=y + CONFIG_INET6_AH=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1127_8d0f55c571791d5b9901f10bd386f5205f0120de.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1127_8d0f55c571791d5b9901f10bd386f5205f0120de.patch --- linux-4.9.13/debian/patches/rpi/rpi_1127_8d0f55c571791d5b9901f10bd386f5205f0120de.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1127_8d0f55c571791d5b9901f10bd386f5205f0120de.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,23 @@ +commit 8d0f55c571791d5b9901f10bd386f5205f0120de +Author: Phil Elwell +Date: Tue Jan 17 11:34:58 2017 +0000 + + BCM270X_DT: Enable UART0 on CM3 + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +index 41874c25a842..3ba6e621856c 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -6,6 +6,10 @@ + model = "Raspberry Pi Compute Module 3"; + }; + ++&uart0 { ++ status = "okay"; ++}; ++ + &gpio { + sdhost_pins: sdhost_pins { + brcm,pins = <48 49 50 51 52 53>; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1128_5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1128_5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533.patch --- linux-4.9.13/debian/patches/rpi/rpi_1128_5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1128_5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,38 @@ +commit 5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533 +Author: Phil Elwell +Date: Tue Jan 17 14:39:39 2017 +0000 + + config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR + + See: https://github.com/raspberrypi/linux/issues/1781 + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 22ade0fe5a15..d5d699e17502 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -406,7 +406,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 219f67051a25..c4898d63d747 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -402,7 +402,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1129_a009e29dab78bf52a1bf86fcfacc432a9c848bb1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1129_a009e29dab78bf52a1bf86fcfacc432a9c848bb1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1129_a009e29dab78bf52a1bf86fcfacc432a9c848bb1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1129_a009e29dab78bf52a1bf86fcfacc432a9c848bb1.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,336 @@ +commit a009e29dab78bf52a1bf86fcfacc432a9c848bb1 +Author: Michael Zoran +Date: Sat Jan 14 21:33:51 2017 -0800 + + ARM64/DWC_OTG: Port dwc_otg driver to ARM64 + + In ARM64, the FIQ mechanism used by this driver is not current + implemented. As a workaround, reqular IRQ is used instead + of FIQ. + + In a separate change, the IRQ-CPU mapping is round robined + on ARM64 to increase concurrency and allow multiple interrupts + to be serviced at a time. This reduces the need for FIQ. + + Tests Run: + + This mechanism is most likely to break when multiple USB devices + are attached at the same time. So the system was tested under + stress. + + Devices: + + 1. USB Speakers playing back a FLAC audio through VLC + at 96KHz.(Higher then typically, but supported on my speakers). + + 2. sftp transferring large files through the buildin ethernet + connection which is connected through USB. + + 3. Keyboard and mouse attached and being used. + + Although I do occasionally hear some glitches, the music seems to + play quite well. + + Signed-off-by: Michael Zoran + +diff --git a/drivers/usb/host/dwc_otg/Makefile b/drivers/usb/host/dwc_otg/Makefile +index e7bdd12015fe..4872b8113b68 100644 +--- a/drivers/usb/host/dwc_otg/Makefile ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o + dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o + dwc_otg-objs += dwc_otg_adp.o + dwc_otg-objs += dwc_otg_fiq_fsm.o ++ifneq ($(CONFIG_ARM64),y) + dwc_otg-objs += dwc_otg_fiq_stub.o ++endif ++ + ifneq ($(CFI),) + dwc_otg-objs += dwc_otg_cfi.o + endif +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +index 13047c08fb71..9304279592cb 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state + } + } + ++ ++#ifdef CONFIG_ARM64 ++ ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) ++{ ++ spin_lock((spinlock_t *)lock); ++} ++ ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) ++{ ++ spin_unlock((spinlock_t *)lock); ++} ++ ++#else ++ + /** + * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock + * Must be called with local interrupts and FIQ disabled. +@@ -122,6 +137,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) + inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } + #endif + ++#endif ++ + /** + * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction + * @channel: channel to re-enable +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +index f9fddfbcffb3..0a1ddf3f89f4 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -127,6 +127,12 @@ enum fiq_debug_level { + FIQDBG_PORTHUB = (1 << 3), + }; + ++#ifdef CONFIG_ARM64 ++ ++typedef spinlock_t fiq_lock_t; ++ ++#else ++ + typedef struct { + union { + uint32_t slock; +@@ -137,6 +143,8 @@ typedef struct { + }; + } fiq_lock_t; + ++#endif ++ + struct fiq_state; + + extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); +@@ -355,6 +363,22 @@ struct fiq_state { + struct fiq_channel_state channel[0]; + }; + ++#ifdef CONFIG_ARM64 ++ ++#ifdef local_fiq_enable ++#undef local_fiq_enable ++#endif ++ ++#ifdef local_fiq_disable ++#undef local_fiq_disable ++#endif ++ ++extern void local_fiq_enable(void); ++ ++extern void local_fiq_disable(void); ++ ++#endif ++ + extern void fiq_fsm_spin_lock(fiq_lock_t *lock); + + extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +index 027414bb2bf9..0eb335f4bc8e 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1021,6 +1021,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) + } + DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); + ++#ifdef CONFIG_ARM64 ++ spin_lock_init(&hcd->fiq_state->lock); ++#endif ++ + for (i = 0; i < num_channels; i++) { + hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; + } +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +index fb57db09378f..a384db5e7ac2 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); + /** This function is used to handle the fast interrupt + * + */ ++#ifdef CONFIG_ARM64 ++extern void dwc_otg_hcd_handle_fiq(void); ++#else + extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); ++#endif + + /** + * Returns private data set by +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +index e6b38ac330b7..b2618c15d1f1 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -36,8 +36,9 @@ + #include "dwc_otg_regs.h" + + #include ++#ifdef CONFIG_ARM + #include +- ++#endif + + extern bool microframe_schedule; + +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +index 74cd5fa54aed..162a65650198 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -51,7 +51,9 @@ + #include + #include + #include ++#ifdef CONFIG_ARM + #include ++#endif + #include + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) + #include <../drivers/usb/core/hcd.h> +@@ -71,6 +73,13 @@ + #include "dwc_otg_driver.h" + #include "dwc_otg_hcd.h" + ++#ifndef __virt_to_bus ++#define __virt_to_bus __virt_to_phys ++#define __bus_to_virt __phys_to_virt ++#define __pfn_to_bus(x) __pfn_to_phys(x) ++#define __bus_to_pfn(x) __phys_to_pfn(x) ++#endif ++ + extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; + + /** +@@ -393,14 +402,49 @@ static struct dwc_otg_hcd_function_ops hcd_fops = { + .get_b_hnp_enable = _get_b_hnp_enable, + }; + ++#ifdef CONFIG_ARM64 ++ ++static int simfiq_irq = -1; ++ ++void local_fiq_enable(void) ++{ ++ if (simfiq_irq >= 0) ++ enable_irq(simfiq_irq); ++} ++ ++void local_fiq_disable(void) ++{ ++ if (simfiq_irq >= 0) ++ disable_irq(simfiq_irq); ++} ++ ++irqreturn_t fiq_irq_handler(int irq, void *dev_id) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id; ++ ++ if (fiq_fsm_enable) ++ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels); ++ else ++ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state); ++ ++ return IRQ_HANDLED; ++} ++ ++#else + static struct fiq_handler fh = { + .name = "usb_fiq", + }; + ++#endif ++ + static void hcd_init_fiq(void *cookie) + { + dwc_otg_device_t *otg_dev = cookie; + dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; ++#ifdef CONFIG_ARM64 ++ int retval = 0; ++ int irq; ++#else + struct pt_regs regs; + int irq; + +@@ -428,6 +472,7 @@ static void hcd_init_fiq(void *cookie) + + // __show_regs(®s); + set_fiq_regs(®s); ++#endif + + //Set the mphi periph to the required registers + dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; +@@ -446,6 +491,23 @@ static void hcd_init_fiq(void *cookie) + DWC_WARN("MPHI periph has NOT been enabled"); + #endif + // Enable FIQ interrupt from USB peripheral ++#ifdef CONFIG_ARM64 ++ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++ ++ if (irq < 0) { ++ DWC_ERROR("Can't get SIM-FIQ irq"); ++ return; ++ } ++ ++ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd); ++ ++ if (retval < 0) { ++ DWC_ERROR("Unable to request SIM-FIQ irq\n"); ++ return; ++ } ++ ++ simfiq_irq = irq; ++#else + #ifdef CONFIG_MULTI_IRQ_HANDLER + irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); + #else +@@ -457,6 +519,8 @@ static void hcd_init_fiq(void *cookie) + } + enable_fiq(irq); + local_fiq_enable(); ++#endif ++ + } + + /** +@@ -519,6 +583,13 @@ int hcd_init(dwc_bus_dev_t *_dev) + otg_dev->hcd = dwc_otg_hcd; + otg_dev->hcd->otg_dev = otg_dev; + ++#ifdef CONFIG_ARM64 ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) ++ goto error2; ++ ++ if (fiq_enable) ++ hcd_init_fiq(otg_dev); ++#else + if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { + goto error2; + } +@@ -531,6 +602,7 @@ int hcd_init(dwc_bus_dev_t *_dev) + smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); + } + } ++#endif + + hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +index 6b2c7d0c93f3..d7b700ff1782 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -76,8 +76,10 @@ + + #ifdef PLATFORM_INTERFACE + #include ++#ifdef CONFIG_ARM + #include + #endif ++#endif + + /** The OS page size */ + #define DWC_OS_PAGE_SIZE PAGE_SIZE diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1130_9e2624286186e6ab7593dcd0a466f889cdc213f9.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1130_9e2624286186e6ab7593dcd0a466f889cdc213f9.patch --- linux-4.9.13/debian/patches/rpi/rpi_1130_9e2624286186e6ab7593dcd0a466f889cdc213f9.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1130_9e2624286186e6ab7593dcd0a466f889cdc213f9.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,73 @@ +commit 9e2624286186e6ab7593dcd0a466f889cdc213f9 +Author: Michael Zoran +Date: Sat Jan 14 21:43:57 2017 -0800 + + ARM64: Round-Robin dispatch IRQs between CPUs. + + IRQ-CPU mapping is round robined on ARM64 to increase + concurrency and allow multiple interrupts to be serviced + at a time. This reduces the need for FIQ. + + Signed-off-by: Michael Zoran + +diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c +index 8ed457fd74bd..a035e1ceacc0 100644 +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -168,10 +168,23 @@ static void armctrl_unmask_irq(struct irq_data *d) + } + } + ++#ifdef CONFIG_ARM64 ++void bcm2836_arm_irqchip_spin_gpu_irq(void); ++ ++static void armctrl_ack_irq(struct irq_data *d) ++{ ++ bcm2836_arm_irqchip_spin_gpu_irq(); ++} ++ ++#endif ++ + static struct irq_chip armctrl_chip = { + .name = "ARMCTRL-level", + .irq_mask = armctrl_mask_irq, +- .irq_unmask = armctrl_unmask_irq ++ .irq_unmask = armctrl_unmask_irq, ++#ifdef CONFIG_ARM64 ++ .irq_ack = armctrl_ack_irq ++#endif + }; + + static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, +diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c +index 93e3f7660c42..486bcbfb3230 100644 +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -145,6 +145,27 @@ static void bcm2836_arm_irqchip_unmask_gpu_irq(struct irq_data *d) + { + } + ++#ifdef CONFIG_ARM64 ++ ++void bcm2836_arm_irqchip_spin_gpu_irq(void) ++{ ++ u32 i; ++ void __iomem *gpurouting = (intc.base + LOCAL_GPU_ROUTING); ++ u32 routing_val = readl(gpurouting); ++ ++ for (i = 1; i <= 3; i++) { ++ u32 new_routing_val = (routing_val + i) & 3; ++ ++ if (cpu_active(new_routing_val)) { ++ writel(new_routing_val, gpurouting); ++ return; ++ } ++ } ++} ++EXPORT_SYMBOL(bcm2836_arm_irqchip_spin_gpu_irq); ++ ++#endif ++ + static struct irq_chip bcm2836_arm_irqchip_gpu = { + .name = "bcm2836-gpu", + .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1131_fdf00abcd95786704c1e8193269acdbd01e0c906.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1131_fdf00abcd95786704c1e8193269acdbd01e0c906.patch --- linux-4.9.13/debian/patches/rpi/rpi_1131_fdf00abcd95786704c1e8193269acdbd01e0c906.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1131_fdf00abcd95786704c1e8193269acdbd01e0c906.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,20 @@ +commit fdf00abcd95786704c1e8193269acdbd01e0c906 +Author: Michael Zoran +Date: Sat Jan 14 21:45:03 2017 -0800 + + ARM64: Enable DWC_OTG Driver In ARM64 Build Config(bcmrpi3_defconfig) + + Signed-off-by: Michael Zoran + +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 4670a490dfb1..8c4392344eb4 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -932,6 +932,7 @@ CONFIG_USB_HIDDEV=y + CONFIG_USB=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y + CONFIG_USB_PRINTER=m + CONFIG_USB_STORAGE=y + CONFIG_USB_STORAGE_REALTEK=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1132_875b7ff3965a938f30c67c6c3bf4b54002f5c6d0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1132_875b7ff3965a938f30c67c6c3bf4b54002f5c6d0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1132_875b7ff3965a938f30c67c6c3bf4b54002f5c6d0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1132_875b7ff3965a938f30c67c6c3bf4b54002f5c6d0.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,26 @@ +commit 875b7ff3965a938f30c67c6c3bf4b54002f5c6d0 +Author: Michael Zoran +Date: Sat Jan 14 21:46:04 2017 -0800 + + ARM64: Use dwc_otg driver by default for USB. + + If it breaks on anybody, they can use the standard device tree + overlays to switch back to the dwc2 driver. + + Signed-off-by: Michael Zoran + +diff --git a/arch/arm/boot/dts/bcm2710.dtsi b/arch/arm/boot/dts/bcm2710.dtsi +index f6def5d7e5d6..3e134a120861 100644 +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -146,10 +146,3 @@ + interrupts = <8>; + }; + +-#ifdef RPI364 +-&usb { +- compatible = "brcm,bcm2835-usb"; +- reg = <0x7e980000 0x10000>; +- interrupts = <1 9>; +-}; +-#endif diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1133_755d112540fcd32da49b8ff44143861f854cb2af.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1133_755d112540fcd32da49b8ff44143861f854cb2af.patch --- linux-4.9.13/debian/patches/rpi/rpi_1133_755d112540fcd32da49b8ff44143861f854cb2af.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1133_755d112540fcd32da49b8ff44143861f854cb2af.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,28 @@ +commit 755d112540fcd32da49b8ff44143861f854cb2af +Author: Phil Elwell +Date: Mon Jan 23 17:36:50 2017 +0000 + + BCM270X_DT: Add reference to audio_pins to CM dtb + + The CM1 dtb contains an empty audio_pins node, but no reference to it. + Adding the usual pinctrl reference from the audio node enables the + audremap overlay (and others) to easily turn on audio. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +index eb8662f0d222..10be69972bd1 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -85,6 +85,11 @@ + pinctrl-0 = <&i2s_pins>; + }; + ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ + &hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + }; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1134_c7922777b2444c1ed0f81b022036795193504a67.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1134_c7922777b2444c1ed0f81b022036795193504a67.patch --- linux-4.9.13/debian/patches/rpi/rpi_1134_c7922777b2444c1ed0f81b022036795193504a67.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1134_c7922777b2444c1ed0f81b022036795193504a67.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,50 @@ +commit c7922777b2444c1ed0f81b022036795193504a67 +Author: popcornmix +Date: Wed Jan 25 11:30:38 2017 +0000 + + config: Add additional network scheduling modules + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index d5d699e17502..a02d5ebf170b 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -296,6 +296,7 @@ CONFIG_NET_SCHED=y + CONFIG_NET_SCH_CBQ=m + CONFIG_NET_SCH_HTB=m + CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_ATM=m + CONFIG_NET_SCH_PRIO=m + CONFIG_NET_SCH_MULTIQ=m + CONFIG_NET_SCH_RED=m +@@ -312,6 +313,9 @@ CONFIG_NET_SCH_CHOKE=m + CONFIG_NET_SCH_QFQ=m + CONFIG_NET_SCH_CODEL=m + CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_FQ=m ++CONFIG_NET_SCH_HHF=m ++CONFIG_NET_SCH_PIE=m + CONFIG_NET_SCH_INGRESS=m + CONFIG_NET_SCH_PLUG=m + CONFIG_NET_CLS_BASIC=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index c4898d63d747..b448eaa866c2 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -292,6 +292,7 @@ CONFIG_NET_SCHED=y + CONFIG_NET_SCH_CBQ=m + CONFIG_NET_SCH_HTB=m + CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_ATM=m + CONFIG_NET_SCH_PRIO=m + CONFIG_NET_SCH_MULTIQ=m + CONFIG_NET_SCH_RED=m +@@ -308,6 +309,9 @@ CONFIG_NET_SCH_CHOKE=m + CONFIG_NET_SCH_QFQ=m + CONFIG_NET_SCH_CODEL=m + CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_FQ=m ++CONFIG_NET_SCH_HHF=m ++CONFIG_NET_SCH_PIE=m + CONFIG_NET_SCH_INGRESS=m + CONFIG_NET_SCH_PLUG=m + CONFIG_NET_CLS_BASIC=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1135_30b6169efe93b9c6d08a048ced99591f8d3c164c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1135_30b6169efe93b9c6d08a048ced99591f8d3c164c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1135_30b6169efe93b9c6d08a048ced99591f8d3c164c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1135_30b6169efe93b9c6d08a048ced99591f8d3c164c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,95 @@ +commit 30b6169efe93b9c6d08a048ced99591f8d3c164c +Author: chris johnson +Date: Sun Jan 22 03:27:31 2017 +0000 + + ASoC: A simple-card overlay for ADAU7002 + + Usage: `dtoverlay=adau7002-simple` + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 45fafd5c39bd..842098be7776 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -2,6 +2,7 @@ + + dtbo-$(CONFIG_ARCH_BCM2835) += \ + adau1977-adc.dtbo \ ++ adau7002-simple.dtbo \ + ads1015.dtbo \ + ads7846.dtbo \ + akkordion-iqdacplus.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 4992a6203a55..2f542a810c3f 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -168,6 +168,12 @@ Load: dtoverlay=adau1977-adc + Params: + + ++Name: adau7002-simple ++Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. ++Load: dtoverlay=adau7002-simple,= ++Params: card-name Override the default, "adau7002", card name. ++ ++ + Name: ads1015 + Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C + Load: dtoverlay=ads1015,= +diff --git a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts +new file mode 100644 +index 000000000000..e67e6625d796 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts +@@ -0,0 +1,52 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ adau7002_codec: adau7002-codec { ++ #sound-dai-cells = <0>; ++ compatible = "adi,adau7002"; ++/* IOVDD-supply = <&supply>;*/ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ sound_overlay: __overlay__ { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "adau7002"; ++ simple-audio-card,bitclock-slave = <&dailink0_slave>; ++ simple-audio-card,frame-slave = <&dailink0_slave>; ++ simple-audio-card,widgets = ++ "Microphone", "Microphone Jack"; ++ simple-audio-card,routing = ++ "PDM_DAT", "Microphone Jack"; ++ status = "okay"; ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ dailink0_slave: simple-audio-card,codec { ++ sound-dai = <&adau7002_codec>; ++ }; ++ }; ++ }; ++ ++ ++ __overrides__ { ++ card-name = <&sound_overlay>,"simple-audio-card,name"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1136_219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1136_219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1136_219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1136_219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,34 @@ +commit 219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5 +Author: Phil Elwell +Date: Wed Jan 25 21:17:23 2017 +0000 + + config: Add SND_SOC_ADAU7002 codec module + + As there is now an overlay requiring it, build the codec module. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index a02d5ebf170b..31163b59b9c6 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -884,6 +884,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_ADAU7002=m + CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index b448eaa866c2..5105a592c9bc 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -878,6 +878,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_ADAU7002=m + CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1137_6838d34e2733b683de1f0fb5a98132b4f1e8f0d2.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1137_6838d34e2733b683de1f0fb5a98132b4f1e8f0d2.patch --- linux-4.9.13/debian/patches/rpi/rpi_1137_6838d34e2733b683de1f0fb5a98132b4f1e8f0d2.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1137_6838d34e2733b683de1f0fb5a98132b4f1e8f0d2.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,283 @@ +commit 6838d34e2733b683de1f0fb5a98132b4f1e8f0d2 +Author: Scott Ellis +Date: Fri Jan 27 06:42:42 2017 -0500 + + Add overlay for mcp3008 adc (#1818) + + Some example usage: + + SPI0.0 + dtparam=spi=on + dtoverlay=mcp3008:spi0-0-present + + SPI0.1 + dtparam=spi=on + dtoverlay=mcp3008:spi0-1-present + + SPI0.0 and SPI0.1 + dtparam=spi=on + dtoverlay=mcp3008:spi0-0-present,spi0-1-present + + SPI1.0 + dtparam=spi=on + dtoverlay=spi1-1cs + dtoverlay=mcp3008:spi1-0-present + + SPI1.2 + dtparam=spi=on + dtoverlay=spi1-1cs:cs0_pin=16 + dtoverlay=mcp3008:spi1-0-present + + SPI1.0 and SPI1.1 + dtoverlay=spi1-2cs + dtoverlay=mcp3008:spi1-0-present,spi1-1-present + + Changing the speed + + SPI0.0 + dtparam=spi=on + dtoverlay=mcp3008:spi0-0-present,spi0-0-speed=2000000 + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 842098be7776..e915dff8a4cd 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -47,6 +47,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mcp23s17.dtbo \ + mcp2515-can0.dtbo \ + mcp2515-can1.dtbo \ ++ mcp3008.dtbo \ + midi-uart0.dtbo \ + mmc.dtbo \ + mz61581.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 2f542a810c3f..aa9b6128c397 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -742,6 +742,15 @@ Params: oscillator Clock frequency for the CAN controller (Hz) + interrupt GPIO for interrupt signal + + ++Name: mcp3008 ++Info: Configures MCP3008 A/D converters ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++Load: dtoverlay=mcp3008,[=] ++Params: spi--present boolean, configure device at spi, cs ++ spi--speed integer, set the spi bus speed for this device ++ ++ + Name: midi-uart0 + Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets + 31.25kbaud, the frequency required for MIDI +diff --git a/arch/arm/boot/dts/overlays/mcp3008-overlay.dts b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +new file mode 100755 +index 000000000000..06bf4264959c +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +@@ -0,0 +1,205 @@ ++/* ++ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_00: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_01: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_10: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_11: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_12: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_20: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_21: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_22: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ spi0-0-present = <0>, "+0+8"; ++ spi0-1-present = <0>, "+1+9"; ++ spi1-0-present = <0>, "+2+10"; ++ spi1-1-present = <0>, "+3+11"; ++ spi1-2-present = <0>, "+4+12"; ++ spi2-0-present = <0>, "+5+13"; ++ spi2-1-present = <0>, "+6+14"; ++ spi2-2-present = <0>, "+7+15"; ++ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; ++ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; ++ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; ++ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; ++ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; ++ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; ++ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; ++ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1138_bc9bc1c420e23e387b38b0561de3bfa792afff2e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1138_bc9bc1c420e23e387b38b0561de3bfa792afff2e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1138_bc9bc1c420e23e387b38b0561de3bfa792afff2e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1138_bc9bc1c420e23e387b38b0561de3bfa792afff2e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,51 @@ +commit bc9bc1c420e23e387b38b0561de3bfa792afff2e +Author: ED6E0F17 +Date: Fri Feb 3 14:52:42 2017 +0000 + + usb: dwc2: Avoid suspending if we're in gadget mode (#1825) + + I've found when booting HiKey with the usb gadget cable attached + if I then try to connect via adb, I get an infinite spew of: + + dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790ecb18 ep1out, 0) + dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790eca18 ep1in, 0) + + It seems that the usb autosuspend is suspending the bus shortly + after bootup when the gadget cable is attached. So when adbd + then tries to use the device, it doesn't work and it then tries + to restart it over and over via the ep_sethalt calls (via + FUNCTIONFS_CLEAR_HALT ioctl). + + Chen Yu suggested this patch to avoid suspending if we're + in device mode, and it avoids the problem. + + Cc: Wei Xu + Cc: Guodong Xu + Cc: Amit Pundir + Cc: Rob Herring + Cc: John Youn + Cc: Douglas Anderson + Cc: Chen Yu + Cc: Kishon Vijay Abraham I + Cc: Felipe Balbi + Cc: Greg Kroah-Hartman + Cc: linux-usb@vger.kernel.org + Suggested-by: Chen Yu + Signed-off-by: John Stultz + Signed-off-by: John Youn + Signed-off-by: Felipe Balbi + +diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c +index df5a06578005..619ccfe1eafc 100644 +--- a/drivers/usb/dwc2/hcd.c ++++ b/drivers/usb/dwc2/hcd.c +@@ -4365,6 +4365,9 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) + if (!HCD_HW_ACCESSIBLE(hcd)) + goto unlock; + ++ if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) ++ goto unlock; ++ + if (!hsotg->core_params->hibernation) + goto skip_power_saving; + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1139_d7138846e47b988cb2d64eec0a37d32deaeed46d.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1139_d7138846e47b988cb2d64eec0a37d32deaeed46d.patch --- linux-4.9.13/debian/patches/rpi/rpi_1139_d7138846e47b988cb2d64eec0a37d32deaeed46d.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1139_d7138846e47b988cb2d64eec0a37d32deaeed46d.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,22 @@ +commit d7138846e47b988cb2d64eec0a37d32deaeed46d +Author: JamesH65 +Date: Mon Feb 6 15:24:47 2017 +0000 + + gpio_mem: Remove unnecessary dev_info output (#1830) + + The open function was spamming syslog every time + called, so have removed call completely. + +diff --git a/drivers/char/broadcom/bcm2835-gpiomem.c b/drivers/char/broadcom/bcm2835-gpiomem.c +index 911f5b7393ed..f5e7f1ba8fb6 100644 +--- a/drivers/char/broadcom/bcm2835-gpiomem.c ++++ b/drivers/char/broadcom/bcm2835-gpiomem.c +@@ -76,8 +76,6 @@ static int bcm2835_gpiomem_open(struct inode *inode, struct file *file) + int dev = iminor(inode); + int ret = 0; + +- dev_info(inst->dev, "gpiomem device opened."); +- + if (dev != DEVICE_MINOR) { + dev_err(inst->dev, "Unknown minor device: %d", dev); + ret = -ENXIO; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1140_5c3f8e9280417185d49e6669ee0f2e5189237d79.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1140_5c3f8e9280417185d49e6669ee0f2e5189237d79.patch --- linux-4.9.13/debian/patches/rpi/rpi_1140_5c3f8e9280417185d49e6669ee0f2e5189237d79.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1140_5c3f8e9280417185d49e6669ee0f2e5189237d79.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,34 @@ +commit 5c3f8e9280417185d49e6669ee0f2e5189237d79 +Author: Matthias Reichl +Date: Sun Jan 22 12:49:36 2017 +0100 + + config: Enable regulator support + + Signed-off-by: Matthias Reichl + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 31163b59b9c6..611b63c3fdf1 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -664,6 +664,8 @@ CONFIG_STMPE_SPI=y + CONFIG_MFD_ARIZONA_I2C=m + CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y ++CONFIG_REGULATOR=y ++CONFIG_REGULATOR_FIXED_VOLTAGE=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 5105a592c9bc..74bc0d81bcb4 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -658,6 +658,8 @@ CONFIG_STMPE_SPI=y + CONFIG_MFD_ARIZONA_I2C=m + CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y ++CONFIG_REGULATOR=y ++CONFIG_REGULATOR_FIXED_VOLTAGE=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1141_5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1141_5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d.patch --- linux-4.9.13/debian/patches/rpi/rpi_1141_5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1141_5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,33 @@ +commit 5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d +Author: Matthias Reichl +Date: Sun Jan 22 12:49:36 2017 +0100 + + BCM270x DT: expose 3.3V and 5V system rails + + Signed-off-by: Matthias Reichl + +diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi +index a46cb4a8b141..36d853715f23 100644 +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -138,4 +138,20 @@ + status = "disabled"; + }; + }; ++ ++ vdd_5v0_reg: fixedregulator_5v0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "5v0"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ vdd_3v3_reg: fixedregulator_3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; + }; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1142_6d8a6526263da2c54fa07768c167fc3cb8d884e4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1142_6d8a6526263da2c54fa07768c167fc3cb8d884e4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1142_6d8a6526263da2c54fa07768c167fc3cb8d884e4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1142_6d8a6526263da2c54fa07768c167fc3cb8d884e4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,284 @@ +commit 6d8a6526263da2c54fa07768c167fc3cb8d884e4 +Author: Matthias Reichl +Date: Sun Jan 22 12:49:36 2017 +0100 + + BCM270x DT: Consolidate audio card overlays + + Reference 3.3V / 5V system rails instead of instantiating local + regulators. + + Add missing power supply properties for codecs where these are + required according to the DT bindings docs. + + Signed-off-by: Matthias Reichl + +diff --git a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +index 24fcd58fd1dc..1aaca71c1b67 100644 +--- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +@@ -6,19 +6,6 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { +- target = <&soc>; +- +- __overlay__ { +- codec_supply: fixedregulator@0 { +- compatible = "regulator-fixed"; +- regulator-name = "AVDD"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- }; +- }; +- }; +- +- fragment@1 { + target = <&i2c>; + + __overlay__ { +@@ -30,19 +17,19 @@ + compatible = "adi,adau1977"; + reg = <0x11>; + reset-gpios = <&gpio 5 0>; +- AVDD-supply = <&codec_supply>; ++ AVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; + +- fragment@2 { ++ fragment@1 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + +- fragment@3 { ++ fragment@2 { + target = <&sound>; + __overlay__ { + compatible = "adi,adau1977-adc"; +diff --git a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +index 208849d5c392..241d03b9b79e 100644 +--- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +index 2f078d4747cc..b4dc99633b9d 100644 +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -34,6 +34,9 @@ + compatible = "ti,pcm5122"; + reg = <0x4d>; + clocks = <&dacpro_osc>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +index f5e41f48ba4f..64cb1e00343b 100644 +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +index 2a26d9cfffb0..d02479ca4a25 100644 +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +index 0d35c85382bb..f16586f05971 100644 +--- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +index d4bad8742a98..4dcf17515f95 100644 +--- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +index da4fbfdfdbbb..b86e1e5edc89 100644 +--- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +@@ -24,8 +24,8 @@ + compatible = "wlf,wm8804"; + reg = <0x3b>; + status = "okay"; +- // DVDD-supply = <®_3v3>; +- // PVDD-supply = <®_3v3>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ PVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +index 312632ad376d..2b8dba0c231b 100644 +--- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4d>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +index cbbede9a5411..1212e3ff591b 100644 +--- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +index 2fac57ca179f..2c3c97813f22 100644 +--- a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts ++++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +@@ -23,12 +23,16 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + + tpa6130a2: tpa6130a2@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; ++ Vdd-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +diff --git a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +index 16b1247bfa61..f8d48233e28c 100644 +--- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +@@ -6,45 +6,13 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { +- target-path = "/"; +- __overlay__ { +- aliases { +- ldo0 = &ldo0; +- ldo1 = &ldo1; +- }; +- }; +- }; +- +- fragment@1 { +- target-path = "/soc"; +- __overlay__ { +- +- ldo1: ldo1 { +- compatible = "regulator-fixed"; +- regulator-name = "DC_5V"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- regulator-always-on; +- }; +- +- ldo0: ldo0 { +- compatible = "regulator-fixed"; +- regulator-name = "DC_3V3"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-always-on; +- }; +- }; +- }; +- +- fragment@2 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + +- fragment@3 { ++ fragment@1 { + target = <&i2c1>; + __overlay__ { + #address-cells = <1>; +@@ -56,21 +24,21 @@ + compatible = "wlf,wm8804"; + reg = <0x3b>; + status = "okay"; +- PVDD-supply = <&ldo0>; +- DVDD-supply = <&ldo0>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + }; + + wm8742: wm8741@1a { + compatible = "wlf,wm8741"; + reg = <0x1a>; + status = "okay"; +- AVDD-supply = <&ldo1>; +- DVDD-supply = <&ldo0>; ++ AVDD-supply = <&vdd_5v0_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; + +- fragment@4 { ++ fragment@2 { + target = <&sound>; + __overlay__ { + compatible = "rra,digidac1-soundcard"; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1143_857895b55c3f77fea7272b95f4100f093964b00b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1143_857895b55c3f77fea7272b95f4100f093964b00b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1143_857895b55c3f77fea7272b95f4100f093964b00b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1143_857895b55c3f77fea7272b95f4100f093964b00b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1243 @@ +commit 857895b55c3f77fea7272b95f4100f093964b00b +Author: Matthias Reichl +Date: Sun Jan 22 12:49:37 2017 +0100 + + ASoC: Add driver for Cirrus Logic Audio Card + + Note: due to problems with deferred probing of regulators + the following softdep should be added to a modprobe.d file + + softdep arizona-spi pre: arizona-ldo1 + + Signed-off-by: Matthias Reichl + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index e915dff8a4cd..0a7d30cd5730 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + qca7000.dtbo \ + raspidac3.dtbo \ + rpi-backlight.dtbo \ ++ rpi-cirrus-wm5102.dtbo \ + rpi-dac.dtbo \ + rpi-display.dtbo \ + rpi-ft5406.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index aa9b6128c397..46228fd324fc 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -995,6 +995,12 @@ Load: dtoverlay=rpi-backlight + Params: + + ++Name: rpi-cirrus-wm5102 ++Info: Configures the Cirrus Logic Audio Card ++Load: dtoverlay=rpi-cirrus-wm5102 ++Params: ++ ++ + Name: rpi-dac + Info: Configures the RPi DAC audio card + Load: dtoverlay=rpi-dac +diff --git a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +new file mode 100644 +index 000000000000..cf85f0af2240 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +@@ -0,0 +1,146 @@ ++// Definitions for the Cirrus Logic Audio Card ++/dts-v1/; ++/plugin/; ++#include ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ wlf_pins: wlf_pins { ++ brcm,pins = <17 22 27 8>; ++ brcm,function = < ++ BCM2835_FSEL_GPIO_OUT ++ BCM2835_FSEL_GPIO_OUT ++ BCM2835_FSEL_GPIO_IN ++ BCM2835_FSEL_GPIO_OUT ++ >; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "RPi-Cirrus 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "disabled"; ++ }; ++ ++ wm5102@1{ ++ compatible = "wlf,wm5102"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ ++ interrupt-parent = <&gpio>; ++ interrupts = <27 8>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ LDOVDD-supply = <&rpi_cirrus_reg_1v8>; ++ AVDD-supply = <&rpi_cirrus_reg_1v8>; ++ DBVDD1-supply = <&rpi_cirrus_reg_1v8>; ++ DBVDD2-supply = <&vdd_3v3_reg>; ++ DBVDD3-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&rpi_cirrus_reg_1v8>; ++ SPKVDDL-supply = <&vdd_5v0_reg>; ++ SPKVDDR-supply = <&vdd_5v0_reg>; ++ DCVDD-supply = <&arizona_ldo1>; ++ ++ wlf,reset = <&gpio 17 GPIO_ACTIVE_HIGH>; ++ wlf,ldoena = <&gpio 22 GPIO_ACTIVE_HIGH>; ++ wlf,gpio-defaults = < ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ >; ++ wlf,micd-configs = <0 1 0>; ++ wlf,dmic-ref = < ++ ARIZONA_DMIC_MICVDD ++ ARIZONA_DMIC_MICBIAS2 ++ ARIZONA_DMIC_MICVDD ++ ARIZONA_DMIC_MICVDD ++ >; ++ wlf,inmode = < ++ ARIZONA_INMODE_DIFF ++ ARIZONA_INMODE_DMIC ++ ARIZONA_INMODE_SE ++ ARIZONA_INMODE_DIFF ++ >; ++ status = "okay"; ++ ++ arizona_ldo1: ldo1 { ++ regulator-name = "LDO1"; ++ // default constraints as in ++ // arizona-ldo1.c ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1800000>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wm8804@3b { ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "wlf,rpi-cirrus"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index d024377e8450..10f6b2017779 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -45,6 +45,15 @@ config SND_BCM2708_SOC_HIFIBERRY_AMP + help + Say Y or M if you want to add support for the HifiBerry Amp amplifier board. + ++config SND_BCM2708_SOC_RPI_CIRRUS ++ tristate "Support for Cirrus Logic Audio Card" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM5102 ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for the Wolfson and ++ Cirrus Logic audio cards. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index bb1df4385401..84c2b20ce2e5 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -16,6 +16,7 @@ snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-justboom-digi-objs := justboom-digi.o ++snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o +@@ -34,6 +35,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +diff --git a/sound/soc/bcm/rpi-cirrus.c b/sound/soc/bcm/rpi-cirrus.c +new file mode 100644 +index 000000000000..ac8651ddff7b +--- /dev/null ++++ b/sound/soc/bcm/rpi-cirrus.c +@@ -0,0 +1,1003 @@ ++/* ++ * ASoC machine driver for Cirrus Logic Audio Card ++ * (with WM5102 and WM8804 codecs) ++ * ++ * Copyright 2015-2017 Matthias Reichl ++ * ++ * Based on rpi-cirrus-sound-pi driver (c) Wolfson / Cirrus Logic Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "../codecs/wm5102.h" ++#include "../codecs/wm8804.h" ++ ++#define WM8804_CLKOUT_HZ 12000000 ++ ++#define RPI_CIRRUS_DEFAULT_RATE 44100 ++#define WM5102_MAX_SYSCLK_1 49152000 /* max sysclk for 4K family */ ++#define WM5102_MAX_SYSCLK_2 45158400 /* max sysclk for 11.025K family */ ++ ++static inline unsigned int calc_sysclk(unsigned int rate) ++{ ++ return (rate % 4000) ? WM5102_MAX_SYSCLK_2 : WM5102_MAX_SYSCLK_1; ++} ++ ++enum { ++ DAI_WM5102 = 0, ++ DAI_WM8804, ++}; ++ ++struct rpi_cirrus_priv { ++ /* mutex for synchronzing FLL1 access with DAPM */ ++ struct mutex lock; ++ unsigned int card_rate; ++ int sync_path_enable; ++ int fll1_freq; /* negative means RefClock in spdif rx case */ ++ ++ /* track hw params/free for substreams */ ++ unsigned int params_set; ++ unsigned int min_rate_idx, max_rate_idx; ++ unsigned char iec958_status[4]; ++}; ++ ++/* helper functions */ ++static inline struct snd_soc_pcm_runtime *get_wm5102_runtime( ++ struct snd_soc_card *card) { ++ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM5102].name); ++} ++ ++static inline struct snd_soc_pcm_runtime *get_wm8804_runtime( ++ struct snd_soc_card *card) { ++ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM8804].name); ++} ++ ++ ++struct rate_info { ++ unsigned int value; ++ char *text; ++}; ++ ++static struct rate_info min_rates[] = { ++ { 0, "off"}, ++ { 32000, "32kHz"}, ++ { 44100, "44.1kHz"} ++}; ++ ++#define NUM_MIN_RATES ARRAY_SIZE(min_rates) ++ ++static int rpi_cirrus_min_rate_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_MIN_RATES; ++ ++ if (uinfo->value.enumerated.item >= NUM_MIN_RATES) ++ uinfo->value.enumerated.item = NUM_MIN_RATES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ min_rates[uinfo->value.enumerated.item].text); ++ return 0; ++} ++ ++static int rpi_cirrus_min_rate_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ ++ ucontrol->value.enumerated.item[0] = priv->min_rate_idx; ++ return 0; ++} ++ ++static int rpi_cirrus_min_rate_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int changed = 0; ++ ++ if (priv->min_rate_idx != ucontrol->value.enumerated.item[0]) { ++ changed = 1; ++ priv->min_rate_idx = ucontrol->value.enumerated.item[0]; ++ } ++ ++ return changed; ++} ++ ++static struct rate_info max_rates[] = { ++ { 0, "off"}, ++ { 48000, "48kHz"}, ++ { 96000, "96kHz"} ++}; ++ ++#define NUM_MAX_RATES ARRAY_SIZE(max_rates) ++ ++static int rpi_cirrus_max_rate_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_MAX_RATES; ++ if (uinfo->value.enumerated.item >= NUM_MAX_RATES) ++ uinfo->value.enumerated.item = NUM_MAX_RATES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ max_rates[uinfo->value.enumerated.item].text); ++ return 0; ++} ++ ++static int rpi_cirrus_max_rate_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ ++ ucontrol->value.enumerated.item[0] = priv->max_rate_idx; ++ return 0; ++} ++ ++static int rpi_cirrus_max_rate_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int changed = 0; ++ ++ if (priv->max_rate_idx != ucontrol->value.enumerated.item[0]) { ++ changed = 1; ++ priv->max_rate_idx = ucontrol->value.enumerated.item[0]; ++ } ++ ++ return changed; ++} ++ ++static int rpi_cirrus_spdif_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_playback_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int i; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = priv->iec958_status[i]; ++ ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_playback_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned char *stat = priv->iec958_status; ++ unsigned char *ctrl_stat = ucontrol->value.iec958.status; ++ unsigned int mask; ++ int i, changed = 0; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ if ((ctrl_stat[i] & mask) != (stat[i] & mask)) { ++ changed = 1; ++ stat[i] = ctrl_stat[i] & mask; ++ snd_soc_update_bits(wm8804_codec, ++ WM8804_SPDTX1 + i, mask, stat[i]); ++ } ++ } ++ ++ return changed; ++} ++ ++static int rpi_cirrus_spdif_mask_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ ucontrol->value.iec958.status[0] = 0xff; ++ ucontrol->value.iec958.status[1] = 0xff; ++ ucontrol->value.iec958.status[2] = 0xff; ++ ucontrol->value.iec958.status[3] = 0x3f; ++ ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_capture_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ unsigned int mask; ++ int i; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ ucontrol->value.iec958.status[i] = ++ snd_soc_read(wm8804_codec, WM8804_RXCHAN1 + i) & mask; ++ } ++ ++ return 0; ++} ++ ++#define SPDIF_FLAG_CTRL(desc, reg, bit, invert) \ ++{ \ ++ .access = SNDRV_CTL_ELEM_ACCESS_READ \ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) \ ++ desc " Flag", \ ++ .info = snd_ctl_boolean_mono_info, \ ++ .get = rpi_cirrus_spdif_status_flag_get, \ ++ .private_value = \ ++ (bit) | ((reg) << 8) | ((invert) << 16) \ ++} ++ ++static int rpi_cirrus_spdif_status_flag_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ ++ unsigned int bit = kcontrol->private_value & 0xff; ++ unsigned int reg = (kcontrol->private_value >> 8) & 0xff; ++ unsigned int invert = (kcontrol->private_value >> 16) & 0xff; ++ ++ bool flag = snd_soc_read(wm8804_codec, reg) & (1 << bit); ++ ++ ucontrol->value.integer.value[0] = invert ? !flag : flag; ++ ++ return 0; ++} ++ ++static const char * const recovered_frequency_texts[] = { ++ "176.4/192 kHz", ++ "88.2/96 kHz", ++ "44.1/48 kHz", ++ "32 kHz" ++}; ++ ++#define NUM_RECOVERED_FREQUENCIES \ ++ ARRAY_SIZE(recovered_frequency_texts) ++ ++static int rpi_cirrus_recovered_frequency_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_RECOVERED_FREQUENCIES; ++ if (uinfo->value.enumerated.item >= NUM_RECOVERED_FREQUENCIES) ++ uinfo->value.enumerated.item = NUM_RECOVERED_FREQUENCIES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ recovered_frequency_texts[uinfo->value.enumerated.item]); ++ return 0; ++} ++ ++static int rpi_cirrus_recovered_frequency_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ ++ ucontrol->value.enumerated.item[0] = ++ (snd_soc_read(wm8804_codec, WM8804_SPDSTAT) >> 4) & 0x03; ++ return 0; ++} ++ ++static const struct snd_kcontrol_new rpi_cirrus_controls[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Min Sample Rate", ++ .info = rpi_cirrus_min_rate_info, ++ .get = rpi_cirrus_min_rate_get, ++ .put = rpi_cirrus_min_rate_put, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Max Sample Rate", ++ .info = rpi_cirrus_max_rate_info, ++ .get = rpi_cirrus_max_rate_get, ++ .put = rpi_cirrus_max_rate_put, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_playback_get, ++ .put = rpi_cirrus_spdif_playback_put, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_capture_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_mask_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) ++ "Recovered Frequency", ++ .info = rpi_cirrus_recovered_frequency_info, ++ .get = rpi_cirrus_recovered_frequency_get, ++ }, ++ SPDIF_FLAG_CTRL("Audio", WM8804_SPDSTAT, 0, 1), ++ SPDIF_FLAG_CTRL("Non-PCM", WM8804_SPDSTAT, 1, 0), ++ SPDIF_FLAG_CTRL("Copyright", WM8804_SPDSTAT, 2, 1), ++ SPDIF_FLAG_CTRL("De-Emphasis", WM8804_SPDSTAT, 3, 0), ++ SPDIF_FLAG_CTRL("Lock", WM8804_SPDSTAT, 6, 1), ++ SPDIF_FLAG_CTRL("Invalid", WM8804_INTSTAT, 1, 0), ++ SPDIF_FLAG_CTRL("TransErr", WM8804_INTSTAT, 3, 0), ++}; ++ ++static const char * const linein_micbias_texts[] = { ++ "off", "on", ++}; ++ ++static SOC_ENUM_SINGLE_VIRT_DECL(linein_micbias_enum, ++ linein_micbias_texts); ++ ++static const struct snd_kcontrol_new linein_micbias_mux = ++ SOC_DAPM_ENUM("Route", linein_micbias_enum); ++ ++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, int event); ++ ++const struct snd_soc_dapm_widget rpi_cirrus_dapm_widgets[] = { ++ SND_SOC_DAPM_MIC("DMIC", NULL), ++ SND_SOC_DAPM_MIC("Headset Mic", NULL), ++ SND_SOC_DAPM_INPUT("Line Input"), ++ SND_SOC_DAPM_MIC("Line Input with Micbias", NULL), ++ SND_SOC_DAPM_MUX("Line Input Micbias", SND_SOC_NOPM, 0, 0, ++ &linein_micbias_mux), ++ SND_SOC_DAPM_INPUT("dummy SPDIF in"), ++ SND_SOC_DAPM_PGA_E("dummy SPDIFRX", SND_SOC_NOPM, 0, 0, NULL, 0, ++ rpi_cirrus_spdif_rx_enable_event, ++ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), ++ SND_SOC_DAPM_INPUT("Dummy Input"), ++ SND_SOC_DAPM_OUTPUT("Dummy Output"), ++}; ++ ++const struct snd_soc_dapm_route rpi_cirrus_dapm_routes[] = { ++ { "IN1L", NULL, "Headset Mic" }, ++ { "IN1R", NULL, "Headset Mic" }, ++ { "Headset Mic", NULL, "MICBIAS1" }, ++ ++ { "IN2L", NULL, "DMIC" }, ++ { "IN2R", NULL, "DMIC" }, ++ { "DMIC", NULL, "MICBIAS2" }, ++ ++ { "IN3L", NULL, "Line Input Micbias" }, ++ { "IN3R", NULL, "Line Input Micbias" }, ++ ++ { "Line Input Micbias", "off", "Line Input" }, ++ { "Line Input Micbias", "on", "Line Input with Micbias" }, ++ ++ /* Make sure MICVDD is enabled, otherwise we get noise */ ++ { "Line Input", NULL, "MICVDD" }, ++ { "Line Input with Micbias", NULL, "MICBIAS3" }, ++ ++ /* Dummy routes to check whether SPDIF RX is enabled or not */ ++ {"dummy SPDIFRX", NULL, "dummy SPDIF in"}, ++ {"AIFTX", NULL, "dummy SPDIFRX"}, ++ ++ /* ++ * Dummy routes to keep wm5102 from staying off on ++ * playback/capture if all mixers are off. ++ */ ++ { "Dummy Output", NULL, "AIF1RX1" }, ++ { "Dummy Output", NULL, "AIF1RX2" }, ++ { "AIF1TX1", NULL, "Dummy Input" }, ++ { "AIF1TX2", NULL, "Dummy Input" }, ++}; ++ ++static int rpi_cirrus_clear_flls(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec) { ++ ++ int ret1, ret2; ++ ++ ret1 = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); ++ ret2 = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0); ++ ++ if (ret1) { ++ dev_warn(card->dev, ++ "setting FLL1 to zero failed: %d\n", ret1); ++ return ret1; ++ } ++ if (ret2) { ++ dev_warn(card->dev, ++ "setting FLL1_REFCLK to zero failed: %d\n", ret2); ++ return ret2; ++ } ++ return 0; ++} ++ ++static int rpi_cirrus_set_fll(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec, unsigned int clk_freq) ++{ ++ int ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ++ ARIZONA_CLK_SRC_MCLK1, ++ WM8804_CLKOUT_HZ, ++ clk_freq); ++ if (ret) ++ dev_err(card->dev, "Failed to set FLL1 to %d: %d\n", ++ clk_freq, ret); ++ ++ usleep_range(1000, 2000); ++ return ret; ++} ++ ++static int rpi_cirrus_set_fll_refclk(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec, ++ unsigned int clk_freq, unsigned int aif2_freq) ++{ ++ int ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1_REFCLK, ++ ARIZONA_CLK_SRC_MCLK1, ++ WM8804_CLKOUT_HZ, ++ clk_freq); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set FLL1_REFCLK to %d: %d\n", ++ clk_freq, ret); ++ return ret; ++ } ++ ++ ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ++ ARIZONA_CLK_SRC_AIF2BCLK, ++ aif2_freq, clk_freq); ++ if (ret) ++ dev_err(card->dev, ++ "Failed to set FLL1 with Sync Clock %d to %d: %d\n", ++ aif2_freq, clk_freq, ret); ++ ++ usleep_range(1000, 2000); ++ return ret; ++} ++ ++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, int event) ++{ ++ struct snd_soc_card *card = w->dapm->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_codec *wm5102_codec = get_wm5102_runtime(card)->codec; ++ ++ unsigned int clk_freq, aif2_freq; ++ int ret = 0; ++ ++ switch (event) { ++ case SND_SOC_DAPM_POST_PMU: ++ mutex_lock(&priv->lock); ++ ++ /* Enable sync path in case of SPDIF capture use case */ ++ ++ clk_freq = calc_sysclk(priv->card_rate); ++ aif2_freq = 64 * priv->card_rate; ++ ++ dev_dbg(card->dev, ++ "spdif_rx: changing FLL1 to use Ref Clock clk: %d spdif: %d\n", ++ clk_freq, aif2_freq); ++ ++ ret = rpi_cirrus_clear_flls(card, wm5102_codec); ++ if (ret) { ++ dev_err(card->dev, "spdif_rx: failed to clear FLLs\n"); ++ goto out; ++ } ++ ++ ret = rpi_cirrus_set_fll_refclk(card, wm5102_codec, ++ clk_freq, aif2_freq); ++ ++ if (ret) { ++ dev_err(card->dev, "spdif_rx: failed to set FLLs\n"); ++ goto out; ++ } ++ ++ /* set to negative to indicate we're doing spdif rx */ ++ priv->fll1_freq = -clk_freq; ++ priv->sync_path_enable = 1; ++ break; ++ ++ case SND_SOC_DAPM_POST_PMD: ++ mutex_lock(&priv->lock); ++ priv->sync_path_enable = 0; ++ break; ++ ++ default: ++ return 0; ++ } ++ ++out: ++ mutex_unlock(&priv->lock); ++ return ret; ++} ++ ++static int rpi_cirrus_set_bias_level(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, ++ enum snd_soc_bias_level level) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; ++ ++ int ret = 0; ++ unsigned int clk_freq; ++ ++ if (dapm->dev != wm5102_runtime->codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_PREPARE: ++ if (dapm->bias_level == SND_SOC_BIAS_ON) ++ break; ++ ++ mutex_lock(&priv->lock); ++ ++ if (!priv->sync_path_enable) { ++ clk_freq = calc_sysclk(priv->card_rate); ++ ++ dev_dbg(card->dev, ++ "set_bias: changing FLL1 from %d to %d\n", ++ priv->fll1_freq, clk_freq); ++ ++ ret = rpi_cirrus_set_fll(card, wm5102_codec, clk_freq); ++ if (ret) ++ dev_err(card->dev, ++ "set_bias: Failed to set FLL1\n"); ++ else ++ priv->fll1_freq = clk_freq; ++ } ++ mutex_unlock(&priv->lock); ++ break; ++ default: ++ break; ++ } ++ ++ return ret; ++} ++ ++static int rpi_cirrus_set_bias_level_post(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, ++ enum snd_soc_bias_level level) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; ++ ++ if (dapm->dev != wm5102_runtime->codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_STANDBY: ++ mutex_lock(&priv->lock); ++ ++ dev_dbg(card->dev, ++ "set_bias_post: changing FLL1 from %d to off\n", ++ priv->fll1_freq); ++ ++ if (rpi_cirrus_clear_flls(card, wm5102_codec)) ++ dev_err(card->dev, ++ "set_bias_post: failed to clear FLLs\n"); ++ else ++ priv->fll1_freq = 0; ++ ++ mutex_unlock(&priv->lock); ++ ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++static int rpi_cirrus_set_wm8804_pll(struct snd_soc_card *card, ++ struct snd_soc_dai *wm8804_dai, unsigned int rate) ++{ ++ int ret; ++ ++ /* use 256fs */ ++ unsigned int clk_freq = rate * 256; ++ ++ ret = snd_soc_dai_set_pll(wm8804_dai, 0, 0, ++ WM8804_CLKOUT_HZ, clk_freq); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set WM8804 PLL to %d: %d\n", clk_freq, ret); ++ return ret; ++ } ++ ++ /* Set MCLK as PLL Output */ ++ ret = snd_soc_dai_set_sysclk(wm8804_dai, ++ WM8804_TX_CLKSRC_PLL, clk_freq, 0); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set MCLK as PLL Output: %d\n", ret); ++ return ret; ++ } ++ ++ return ret; ++} ++ ++static int rpi_cirrus_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned int min_rate = min_rates[priv->min_rate_idx].value; ++ unsigned int max_rate = max_rates[priv->max_rate_idx].value; ++ ++ if (min_rate || max_rate) { ++ if (max_rate == 0) ++ max_rate = UINT_MAX; ++ ++ dev_dbg(card->dev, ++ "startup: limiting rate to %u-%u\n", ++ min_rate, max_rate); ++ ++ snd_pcm_hw_constraint_minmax(substream->runtime, ++ SNDRV_PCM_HW_PARAM_RATE, min_rate, max_rate); ++ } ++ ++ return 0; ++} ++ ++static struct snd_soc_pcm_stream rpi_cirrus_dai_link2_params = { ++ .formats = SNDRV_PCM_FMTBIT_S24_LE, ++ .channels_min = 2, ++ .channels_max = 2, ++ .rate_min = RPI_CIRRUS_DEFAULT_RATE, ++ .rate_max = RPI_CIRRUS_DEFAULT_RATE, ++}; ++ ++static int rpi_cirrus_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_dai *bcm_i2s_dai = rtd->cpu_dai; ++ struct snd_soc_codec *wm5102_codec = rtd->codec; ++ struct snd_soc_dai *wm8804_dai = get_wm8804_runtime(card)->codec_dai; ++ ++ int ret; ++ ++ unsigned int width = snd_pcm_format_physical_width( ++ params_format(params)); ++ unsigned int rate = params_rate(params); ++ unsigned int clk_freq = calc_sysclk(rate); ++ ++ mutex_lock(&priv->lock); ++ ++ dev_dbg(card->dev, "hw_params: setting rate to %d\n", rate); ++ ++ ret = snd_soc_dai_set_bclk_ratio(bcm_i2s_dai, 2 * width); ++ if (ret) { ++ dev_err(card->dev, "set_bclk_ratio failed: %d\n", ret); ++ goto out; ++ } ++ ++ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, 2, width); ++ if (ret) { ++ dev_err(card->dev, "set_tdm_slot failed: %d\n", ret); ++ goto out; ++ } ++ ++ /* WM8804 supports sample rates from 32k only */ ++ if (rate >= 32000) { ++ ret = rpi_cirrus_set_wm8804_pll(card, wm8804_dai, rate); ++ if (ret) ++ goto out; ++ } ++ ++ ret = snd_soc_codec_set_sysclk(wm5102_codec, ++ ARIZONA_CLK_SYSCLK, ++ ARIZONA_CLK_SRC_FLL1, ++ clk_freq, ++ SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(card->dev, "Failed to set SYSCLK: %d\n", ret); ++ goto out; ++ } ++ ++ if ((priv->fll1_freq > 0) && (priv->fll1_freq != clk_freq)) { ++ dev_dbg(card->dev, ++ "hw_params: changing FLL1 from %d to %d\n", ++ priv->fll1_freq, clk_freq); ++ ++ if (rpi_cirrus_clear_flls(card, wm5102_codec)) { ++ dev_err(card->dev, "hw_params: failed to clear FLLs\n"); ++ goto out; ++ } ++ ++ if (rpi_cirrus_set_fll(card, wm5102_codec, clk_freq)) { ++ dev_err(card->dev, "hw_params: failed to set FLL\n"); ++ goto out; ++ } ++ ++ priv->fll1_freq = clk_freq; ++ } ++ ++ priv->card_rate = rate; ++ rpi_cirrus_dai_link2_params.rate_min = rate; ++ rpi_cirrus_dai_link2_params.rate_max = rate; ++ ++ priv->params_set |= 1 << substream->stream; ++ ++out: ++ mutex_unlock(&priv->lock); ++ ++ return ret; ++} ++ ++static int rpi_cirrus_hw_free(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_codec *wm5102_codec = rtd->codec; ++ int ret; ++ unsigned int old_params_set = priv->params_set; ++ ++ priv->params_set &= ~(1 << substream->stream); ++ ++ /* disable sysclk if this was the last open stream */ ++ if (priv->params_set == 0 && old_params_set) { ++ dev_dbg(card->dev, ++ "hw_free: Setting SYSCLK to Zero\n"); ++ ++ ret = snd_soc_codec_set_sysclk(wm5102_codec, ++ ARIZONA_CLK_SYSCLK, ++ ARIZONA_CLK_SRC_FLL1, ++ 0, ++ SND_SOC_CLOCK_IN); ++ if (ret) ++ dev_err(card->dev, ++ "hw_free: Failed to set SYSCLK to Zero: %d\n", ++ ret); ++ } ++ return 0; ++} ++ ++static int rpi_cirrus_init_wm5102(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ int ret; ++ ++ /* no 32kHz input, derive it from sysclk if needed */ ++ snd_soc_update_bits(codec, ++ ARIZONA_CLOCK_32K_1, ARIZONA_CLK_32K_SRC_MASK, 2); ++ ++ if (rpi_cirrus_clear_flls(rtd->card, codec)) ++ dev_warn(rtd->card->dev, ++ "init_wm5102: failed to clear FLLs\n"); ++ ++ ret = snd_soc_codec_set_sysclk(codec, ++ ARIZONA_CLK_SYSCLK, ARIZONA_CLK_SRC_FLL1, ++ 0, SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(rtd->card->dev, ++ "Failed to set SYSCLK to Zero: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int rpi_cirrus_init_wm8804(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned int mask; ++ int i, ret; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ priv->iec958_status[i] = ++ snd_soc_read(codec, WM8804_SPDTX1 + i) & mask; ++ } ++ ++ /* Setup for 256fs */ ++ ret = snd_soc_dai_set_clkdiv(codec_dai, ++ WM8804_MCLK_DIV, WM8804_MCLKDIV_256FS); ++ if (ret) { ++ dev_err(card->dev, ++ "init_wm8804: Failed to set MCLK_DIV to 256fs: %d\n", ++ ret); ++ return ret; ++ } ++ ++ /* Output OSC on CLKOUT */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, ++ WM8804_CLKOUT_SRC_OSCCLK, WM8804_CLKOUT_HZ, 0); ++ if (ret) ++ dev_err(card->dev, ++ "init_wm8804: Failed to set CLKOUT as OSC Frequency: %d\n", ++ ret); ++ ++ /* Init PLL with default samplerate */ ++ ret = rpi_cirrus_set_wm8804_pll(card, codec_dai, ++ RPI_CIRRUS_DEFAULT_RATE); ++ if (ret) ++ dev_err(card->dev, ++ "init_wm8804: Failed to setup PLL for %dHz: %d\n", ++ RPI_CIRRUS_DEFAULT_RATE, ret); ++ ++ return ret; ++} ++ ++static struct snd_soc_ops rpi_cirrus_ops = { ++ .startup = rpi_cirrus_startup, ++ .hw_params = rpi_cirrus_hw_params, ++ .hw_free = rpi_cirrus_hw_free, ++}; ++ ++static struct snd_soc_dai_link rpi_cirrus_dai[] = { ++ [DAI_WM5102] = { ++ .name = "WM5102", ++ .stream_name = "WM5102 AiFi", ++ .codec_dai_name = "wm5102-aif1", ++ .codec_name = "wm5102-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &rpi_cirrus_ops, ++ .init = rpi_cirrus_init_wm5102, ++ }, ++ [DAI_WM8804] = { ++ .name = "WM5102 SPDIF", ++ .stream_name = "SPDIF Tx/Rx", ++ .cpu_dai_name = "wm5102-aif2", ++ .codec_dai_name = "wm8804-spdif", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ignore_suspend = 1, ++ .params = &rpi_cirrus_dai_link2_params, ++ .init = rpi_cirrus_init_wm8804, ++ }, ++}; ++ ++ ++static int rpi_cirrus_late_probe(struct snd_soc_card *card) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_pcm_runtime *wm8804_runtime = get_wm8804_runtime(card); ++ int ret; ++ ++ dev_dbg(card->dev, "iec958_bits: %02x %02x %02x %02x\n", ++ priv->iec958_status[0], ++ priv->iec958_status[1], ++ priv->iec958_status[2], ++ priv->iec958_status[3]); ++ ++ ret = snd_soc_dai_set_sysclk( ++ wm5102_runtime->codec_dai, ARIZONA_CLK_SYSCLK, 0, 0); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set WM5102 codec dai clk domain: %d\n", ret); ++ return ret; ++ } ++ ++ ret = snd_soc_dai_set_sysclk( ++ wm8804_runtime->cpu_dai, ARIZONA_CLK_SYSCLK, 0, 0); ++ if (ret) ++ dev_err(card->dev, ++ "Failed to set WM8804 codec dai clk domain: %d\n", ret); ++ ++ return ret; ++} ++ ++/* audio machine driver */ ++static struct snd_soc_card rpi_cirrus_card = { ++ .name = "RPi-Cirrus", ++ .driver_name = "RPiCirrus", ++ .owner = THIS_MODULE, ++ .dai_link = rpi_cirrus_dai, ++ .num_links = ARRAY_SIZE(rpi_cirrus_dai), ++ .late_probe = rpi_cirrus_late_probe, ++ .controls = rpi_cirrus_controls, ++ .num_controls = ARRAY_SIZE(rpi_cirrus_controls), ++ .dapm_widgets = rpi_cirrus_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(rpi_cirrus_dapm_widgets), ++ .dapm_routes = rpi_cirrus_dapm_routes, ++ .num_dapm_routes = ARRAY_SIZE(rpi_cirrus_dapm_routes), ++ .set_bias_level = rpi_cirrus_set_bias_level, ++ .set_bias_level_post = rpi_cirrus_set_bias_level_post, ++}; ++ ++static int rpi_cirrus_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct rpi_cirrus_priv *priv; ++ struct device_node *i2s_node; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->min_rate_idx = 1; /* min samplerate 32kHz */ ++ priv->card_rate = RPI_CIRRUS_DEFAULT_RATE; ++ ++ mutex_init(&priv->lock); ++ ++ snd_soc_card_set_drvdata(&rpi_cirrus_card, priv); ++ ++ if (!pdev->dev.of_node) ++ return -ENODEV; ++ ++ i2s_node = of_parse_phandle( ++ pdev->dev.of_node, "i2s-controller", 0); ++ if (!i2s_node) { ++ dev_err(&pdev->dev, "i2s-controller missing in DT\n"); ++ return -ENODEV; ++ } ++ ++ rpi_cirrus_dai[DAI_WM5102].cpu_of_node = i2s_node; ++ rpi_cirrus_dai[DAI_WM5102].platform_of_node = i2s_node; ++ ++ rpi_cirrus_card.dev = &pdev->dev; ++ ++ ret = devm_snd_soc_register_card(&pdev->dev, &rpi_cirrus_card); ++ if (ret) { ++ if (ret == -EPROBE_DEFER) ++ dev_dbg(&pdev->dev, ++ "register card requested probe deferral\n"); ++ else ++ dev_err(&pdev->dev, ++ "Failed to register card: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++static const struct of_device_id rpi_cirrus_of_match[] = { ++ { .compatible = "wlf,rpi-cirrus", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rpi_cirrus_of_match); ++ ++static struct platform_driver rpi_cirrus_driver = { ++ .driver = { ++ .name = "snd-rpi-cirrus", ++ .of_match_table = of_match_ptr(rpi_cirrus_of_match), ++ }, ++ .probe = rpi_cirrus_probe, ++}; ++ ++module_platform_driver(rpi_cirrus_driver); ++ ++MODULE_AUTHOR("Matthias Reichl "); ++MODULE_DESCRIPTION("ASoC driver for Cirrus Logic Audio Card"); ++MODULE_LICENSE("GPL"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1144_fd99abc0ea95768377d1ee117bda7068845dc466.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1144_fd99abc0ea95768377d1ee117bda7068845dc466.patch --- linux-4.9.13/debian/patches/rpi/rpi_1144_fd99abc0ea95768377d1ee117bda7068845dc466.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1144_fd99abc0ea95768377d1ee117bda7068845dc466.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,48 @@ +commit fd99abc0ea95768377d1ee117bda7068845dc466 +Author: Matthias Reichl +Date: Sun Jan 22 12:49:37 2017 +0100 + + config: enable Cirrus Logic Audio Card + + Signed-off-by: Matthias Reichl + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 611b63c3fdf1..858143b9b68a 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -666,6 +666,7 @@ CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y + CONFIG_REGULATOR=y + CONFIG_REGULATOR_FIXED_VOLTAGE=m ++CONFIG_REGULATOR_ARIZONA=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +@@ -872,6 +873,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m + CONFIG_SND_BCM2708_SOC_RPI_DAC=m + CONFIG_SND_BCM2708_SOC_RPI_PROTO=m + CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 74bc0d81bcb4..f0b87d15e959 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -660,6 +660,7 @@ CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y + CONFIG_REGULATOR=y + CONFIG_REGULATOR_FIXED_VOLTAGE=m ++CONFIG_REGULATOR_ARIZONA=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +@@ -866,6 +867,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m + CONFIG_SND_BCM2708_SOC_RPI_DAC=m + CONFIG_SND_BCM2708_SOC_RPI_PROTO=m + CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1145_958ff3ebdeea52a11bb917e724cfe4d284cd3214.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1145_958ff3ebdeea52a11bb917e724cfe4d284cd3214.patch --- linux-4.9.13/debian/patches/rpi/rpi_1145_958ff3ebdeea52a11bb917e724cfe4d284cd3214.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1145_958ff3ebdeea52a11bb917e724cfe4d284cd3214.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,24 @@ +commit 958ff3ebdeea52a11bb917e724cfe4d284cd3214 +Author: Phil Elwell +Date: Thu Feb 9 14:33:30 2017 +0000 + + irq-bcm2836: Avoid "Invalid trigger warning" + + Initialise the level for each IRQ to avoid a warning from the + arm arch timer code. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c +index 486bcbfb3230..e10597c1a1e5 100644 +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -178,7 +178,7 @@ static void bcm2836_arm_irqchip_register_irq(int hwirq, struct irq_chip *chip) + + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq); +- irq_set_status_flags(irq, IRQ_NOAUTOEN); ++ irq_set_status_flags(irq, IRQ_NOAUTOEN | IRQ_TYPE_LEVEL_LOW); + } + + static void diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1146_1e6ffd75f7a93f748c195a52a2a659ce2ef77e13.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1146_1e6ffd75f7a93f748c195a52a2a659ce2ef77e13.patch --- linux-4.9.13/debian/patches/rpi/rpi_1146_1e6ffd75f7a93f748c195a52a2a659ce2ef77e13.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1146_1e6ffd75f7a93f748c195a52a2a659ce2ef77e13.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,35 @@ +commit 1e6ffd75f7a93f748c195a52a2a659ce2ef77e13 +Author: Phil Elwell +Date: Thu Feb 9 14:36:44 2017 +0000 + + sound: Demote deferral errors to INFO level + + At present there is no mechanism to specify driver load order, + which can lead to deferrals and repeated retries until successful. + Since this situation is expected, reduce the dmesg level to + INFO and mention that the operation will be retried. + + Signed-off-by: Phil Elwell + +diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c +index c0bbcd903261..a2504d8c83d7 100644 +--- a/sound/soc/soc-core.c ++++ b/sound/soc/soc-core.c +@@ -1013,7 +1013,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, + cpu_dai_component.dai_name = dai_link->cpu_dai_name; + rtd->cpu_dai = snd_soc_find_dai(&cpu_dai_component); + if (!rtd->cpu_dai) { +- dev_err(card->dev, "ASoC: CPU DAI %s not registered\n", ++ dev_info(card->dev, "ASoC: CPU DAI %s not registered - will retry\n", + dai_link->cpu_dai_name); + goto _err_defer; + } +@@ -1025,7 +1025,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, + for (i = 0; i < rtd->num_codecs; i++) { + codec_dais[i] = snd_soc_find_dai(&codecs[i]); + if (!codec_dais[i]) { +- dev_err(card->dev, "ASoC: CODEC DAI %s not registered\n", ++ dev_info(card->dev, "ASoC: CODEC DAI %s not registered - will retry\n", + codecs[i].dai_name); + goto _err_defer; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1147_819b32a0e3c13dcb681608d3379039be425c1feb.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1147_819b32a0e3c13dcb681608d3379039be425c1feb.patch --- linux-4.9.13/debian/patches/rpi/rpi_1147_819b32a0e3c13dcb681608d3379039be425c1feb.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1147_819b32a0e3c13dcb681608d3379039be425c1feb.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,232 @@ +commit 819b32a0e3c13dcb681608d3379039be425c1feb +Author: Phil Elwell +Date: Thu Feb 9 14:40:33 2017 +0000 + + sound: Suppress error message about deferrals + + Since driver load deferrals are expected and will already + have resulted in a kernel message, suppress an essentially + duplicate error message from the RPi audio board drivers. + + Signed-off-by: Phil Elwell + +diff --git a/sound/soc/bcm/adau1977-adc.c b/sound/soc/bcm/adau1977-adc.c +index 6e2ee027926e..f3d7e5db7bb9 100644 +--- a/sound/soc/bcm/adau1977-adc.c ++++ b/sound/soc/bcm/adau1977-adc.c +@@ -90,7 +90,7 @@ static int snd_adau1977_adc_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_adau1977_adc); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +diff --git a/sound/soc/bcm/allo-piano-dac.c b/sound/soc/bcm/allo-piano-dac.c +index 8e8e62e5a36a..eaf50fb6dbca 100644 +--- a/sound/soc/bcm/allo-piano-dac.c ++++ b/sound/soc/bcm/allo-piano-dac.c +@@ -109,7 +109,7 @@ static int snd_allo_piano_dac_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_allo_piano_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +diff --git a/sound/soc/bcm/digidac1-soundcard.c b/sound/soc/bcm/digidac1-soundcard.c +index 446796e7e4c1..f200688bb4ae 100644 +--- a/sound/soc/bcm/digidac1-soundcard.c ++++ b/sound/soc/bcm/digidac1-soundcard.c +@@ -387,9 +387,9 @@ static int digidac1_soundcard_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&digidac1_soundcard); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", +- ret); ++ ret); + + return ret; + } +diff --git a/sound/soc/bcm/dionaudio_loco.c b/sound/soc/bcm/dionaudio_loco.c +index 89e65317512b..65e03741d349 100644 +--- a/sound/soc/bcm/dionaudio_loco.c ++++ b/sound/soc/bcm/dionaudio_loco.c +@@ -86,7 +86,7 @@ static int snd_rpi_dionaudio_loco_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + +diff --git a/sound/soc/bcm/hifiberry_amp.c b/sound/soc/bcm/hifiberry_amp.c +index d17c29780507..221c6c38e646 100644 +--- a/sound/soc/bcm/hifiberry_amp.c ++++ b/sound/soc/bcm/hifiberry_amp.c +@@ -96,9 +96,8 @@ static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev) + + ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); + +- if (ret != 0) { ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); +- } + + return ret; + } +diff --git a/sound/soc/bcm/hifiberry_dac.c b/sound/soc/bcm/hifiberry_dac.c +index 45f2b770ad9e..ee9f13395354 100644 +--- a/sound/soc/bcm/hifiberry_dac.c ++++ b/sound/soc/bcm/hifiberry_dac.c +@@ -90,7 +90,7 @@ static int snd_rpi_hifiberry_dac_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +diff --git a/sound/soc/bcm/hifiberry_dacplus.c b/sound/soc/bcm/hifiberry_dacplus.c +index bdc35e7e6bc1..b7b401cbe2b0 100644 +--- a/sound/soc/bcm/hifiberry_dacplus.c ++++ b/sound/soc/bcm/hifiberry_dacplus.c +@@ -324,7 +324,7 @@ static int snd_rpi_hifiberry_dacplus_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +diff --git a/sound/soc/bcm/hifiberry_digi.c b/sound/soc/bcm/hifiberry_digi.c +index 19dc953b7227..7620dd02de40 100644 +--- a/sound/soc/bcm/hifiberry_digi.c ++++ b/sound/soc/bcm/hifiberry_digi.c +@@ -242,7 +242,7 @@ static int snd_rpi_hifiberry_digi_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +diff --git a/sound/soc/bcm/iqaudio-dac.c b/sound/soc/bcm/iqaudio-dac.c +index aa15bc4b49ca..1ee4097c8463 100644 +--- a/sound/soc/bcm/iqaudio-dac.c ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -197,8 +197,9 @@ static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev) + + ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); + if (ret) { +- dev_err(&pdev->dev, +- "snd_soc_register_card() failed: %d\n", ret); ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); + return ret; + } + +diff --git a/sound/soc/bcm/iqaudio_digi.c b/sound/soc/bcm/iqaudio_digi.c +index 9b6e829bcb5b..33aa2be8a43a 100644 +--- a/sound/soc/bcm/iqaudio_digi.c ++++ b/sound/soc/bcm/iqaudio_digi.c +@@ -204,7 +204,7 @@ static int snd_rpi_iqaudio_digi_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(card); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + +diff --git a/sound/soc/bcm/justboom-dac.c b/sound/soc/bcm/justboom-dac.c +index 05a224ec712d..9bab6cf063d3 100644 +--- a/sound/soc/bcm/justboom-dac.c ++++ b/sound/soc/bcm/justboom-dac.c +@@ -128,7 +128,7 @@ static int snd_rpi_justboom_dac_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_justboom_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +diff --git a/sound/soc/bcm/justboom-digi.c b/sound/soc/bcm/justboom-digi.c +index abfdc5c4dd58..909cf8928f2f 100644 +--- a/sound/soc/bcm/justboom-digi.c ++++ b/sound/soc/bcm/justboom-digi.c +@@ -181,7 +181,7 @@ static int snd_rpi_justboom_digi_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_justboom_digi); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +diff --git a/sound/soc/bcm/pisound.c b/sound/soc/bcm/pisound.c +index ba70734b89e6..06ff1e53dc9d 100644 +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -1076,7 +1076,8 @@ static int pisnd_probe(struct platform_device *pdev) + ret = snd_soc_register_card(&pisnd_card); + + if (ret < 0) { +- printe("snd_soc_register_card() failed: %d\n", ret); ++ if (ret != -EPROBE_DEFER) ++ printe("snd_soc_register_card() failed: %d\n", ret); + pisnd_uninit_gpio(); + kobject_put(pisnd_kobj); + pisnd_spi_uninit(); +diff --git a/sound/soc/bcm/raspidac3.c b/sound/soc/bcm/raspidac3.c +index dd9eeea2af03..ad2b5b89bc82 100644 +--- a/sound/soc/bcm/raspidac3.c ++++ b/sound/soc/bcm/raspidac3.c +@@ -149,7 +149,7 @@ static int snd_rpi_raspidac3_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_raspidac3); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +diff --git a/sound/soc/bcm/rpi-dac.c b/sound/soc/bcm/rpi-dac.c +index 59dc89ecabc0..38224467cbab 100644 +--- a/sound/soc/bcm/rpi-dac.c ++++ b/sound/soc/bcm/rpi-dac.c +@@ -85,7 +85,7 @@ static int snd_rpi_rpi_dac_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_rpi_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +diff --git a/sound/soc/bcm/rpi-proto.c b/sound/soc/bcm/rpi-proto.c +index 9db678e885ef..fadbfade1002 100644 +--- a/sound/soc/bcm/rpi-proto.c ++++ b/sound/soc/bcm/rpi-proto.c +@@ -117,10 +117,9 @@ static int snd_rpi_proto_probe(struct platform_device *pdev) + } + + ret = snd_soc_register_card(&snd_rpi_proto); +- if (ret) { ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); +- } + + return ret; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1148_7b983bf9ab14af746651be665376c242b4ee133f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1148_7b983bf9ab14af746651be665376c242b4ee133f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1148_7b983bf9ab14af746651be665376c242b4ee133f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1148_7b983bf9ab14af746651be665376c242b4ee133f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,137 @@ +commit 7b983bf9ab14af746651be665376c242b4ee133f +Author: Claggy3 +Date: Sat Feb 11 14:00:30 2017 +0000 + + Update vfpmodule.c + + Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m. + This patch fixes a problem with VFP state save and restore related + to exception handling (panic with message "BUG: unsupported FP + instruction in kernel mode") present on VFP11 floating point units + (as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry + Pi boards). This patch was developed and discussed on + + https://github.com/raspberrypi/linux/issues/859 + + A precondition to see the crashes is that floating point exception + traps are enabled. In this case, the VFP11 might determine that a FPU + operation needs to trap at a point in time when it is not possible to + signal this to the ARM11 core any more. The VFP11 will then set the + FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases, + a second opcode might have been accepted by the VFP11 before the + exception was detected and could be reported to the ARM11 - in this + case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in + FPINST2.) + + If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued + by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode + trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits + to decide what actions to take, i.e., whether to emulate the opcodes + found in FPINST and FPINST2, and whether to retry the bounced instruction. + + If a user space application has left the VFP11 in this "pending trap" + state, the next FPU opcode issued to the VFP11 might actually be the + VSTMIA operation vfp_save_state() uses to store the FPU registers + to memory (in our test cases, when building the signal stack frame). + In this case, the kernel crashes as described above. + + This patch fixes the problem by making sure that vfp_save_state() is + always entered with FPEXC.EX cleared. (The current value of FPEXC has + already been saved, so this does not corrupt the context. Clearing + FPEXC.EX has no effects on FPINST or FPINST2. Also note that many + callers already modify FPEXC by setting FPEXC.EN before invoking + vfp_save_state().) + + This patch also addresses a second problem related to FPEXC.EX: After + returning from signal handling, the kernel reloads the VFP context + from the user mode stack. However, the current code explicitly clears + both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these + bits to be preserved, this patch disables clearing them for VFP + implementations belonging to architecture 1. There should be no + negative side effects: the user can set both bits by executing FPU + opcodes anyway, and while user code may now place arbitrary values + into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support + code knows which instructions can be emulated, and rejects other + opcodes with "unhandled bounce" messages, so there should be no + security impact from allowing reloading FPEXC.EX and FPEXC.FP2V. + + Signed-off-by: Christopher Alexander Tobias Schulze + +diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c +index da0b33deba6d..c6f1d6da808c 100644 +--- a/arch/arm/vfp/vfpmodule.c ++++ b/arch/arm/vfp/vfpmodule.c +@@ -179,8 +179,11 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) + * case the thread migrates to a different CPU. The + * restoring is done lazily. + */ +- if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) ++ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + vfp_save_state(vfp_current_hw_state[cpu], fpexc); ++ } + #endif + + /* +@@ -463,13 +466,16 @@ static int vfp_pm_suspend(void) + /* if vfp is on, then save state for resumption */ + if (fpexc & FPEXC_EN) { + pr_debug("%s: saving vfp state\n", __func__); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + vfp_save_state(&ti->vfpstate, fpexc); + + /* disable, just in case */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + } else if (vfp_current_hw_state[ti->cpu]) { + #ifndef CONFIG_SMP +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); + fmxr(FPEXC, fpexc); + #endif +@@ -532,7 +538,8 @@ void vfp_sync_hwstate(struct thread_info *thread) + /* + * Save the last VFP state on this CPU. + */ +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); + fmxr(FPEXC, fpexc); + } +@@ -604,6 +611,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; ++ u32 fpsid = fmrx(FPSID); + + /* Disable VFP to avoid corrupting the new thread state. */ + vfp_flush_hwstate(thread); +@@ -627,8 +635,12 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + +- /* Ensure FPINST2 is invalid and the exception flag is cleared. */ +- fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ /* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */ ++ if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) { ++ /* Ensure FPINST2 is invalid and the exception flag is cleared. */ ++ fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ } ++ + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); +@@ -698,7 +710,8 @@ void kernel_neon_begin(void) + cpu = get_cpu(); + + fpexc = fmrx(FPEXC) | FPEXC_EN; +- fmxr(FPEXC, fpexc); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + + /* + * Save the userland NEON/VFP state. Under UP, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1149_08c7bce2e61f7dd23c44713e8c99c97c664ed01c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1149_08c7bce2e61f7dd23c44713e8c99c97c664ed01c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1149_08c7bce2e61f7dd23c44713e8c99c97c664ed01c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1149_08c7bce2e61f7dd23c44713e8c99c97c664ed01c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,27 @@ +commit 08c7bce2e61f7dd23c44713e8c99c97c664ed01c +Author: Martin Cerveny +Date: Mon Feb 13 17:23:47 2017 +0100 + + dwc_otg: fix summarize urb->actual_length for isochronous transfers + + Kernel does not copy input data of ISO transfers to userspace + if actual_length is set only in ISO transfers and not summarized + in urb->actual_length. Fixes raspberrypi/linux#903 + +diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +index 162a65650198..992269d61ecf 100644 +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -334,10 +334,12 @@ static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, + int i; + + urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc_otg_hcd_urb_get_iso_desc_actual_length + (dwc_otg_urb, i); ++ urb->actual_length += urb->iso_frame_desc[i].actual_length; + urb->iso_frame_desc[i].status = + dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1150_e93cac3fe731618eb27212d819aa9299b8deac1c.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1150_e93cac3fe731618eb27212d819aa9299b8deac1c.patch --- linux-4.9.13/debian/patches/rpi/rpi_1150_e93cac3fe731618eb27212d819aa9299b8deac1c.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1150_e93cac3fe731618eb27212d819aa9299b8deac1c.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,27 @@ +commit e93cac3fe731618eb27212d819aa9299b8deac1c +Author: Boris Brezillon +Date: Tue Nov 22 12:45:28 2016 -0800 + + clk: bcm2835: Fix ->fixed_divider of pllh_aux + + There is no fixed divider on pllh_aux. + + Signed-off-by: Boris Brezillon + Signed-off-by: Eric Anholt + Reviewed-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit f2a46926aba1f0c33944901d2420a6a887455ddc) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 21e2a538ff0d..a99ccf9f056d 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1607,7 +1607,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 1), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1151_681419f43b2dceb8a1cbfb1fc3098bee4973558a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1151_681419f43b2dceb8a1cbfb1fc3098bee4973558a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1151_681419f43b2dceb8a1cbfb1fc3098bee4973558a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1151_681419f43b2dceb8a1cbfb1fc3098bee4973558a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,124 @@ +commit 681419f43b2dceb8a1cbfb1fc3098bee4973558a +Author: Boris Brezillon +Date: Thu Dec 1 22:00:19 2016 +0100 + + clk: bcm: Support rate change propagation on bcm2835 clocks + + Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set + to a precise rate (in our case 108MHz). With the current implementation, + where peripheral clocks are not allowed to forward rate change requests + to their parents, it is impossible to match this requirement unless the + bootloader has configured things correctly, or a specific rate has been + assigned through the DT (with the assigned-clk-rates property). + + Add a new field to struct bcm2835_clock_data to specify which parent + clocks accept rate change propagation, and support set rate propagation + in bcm2835_clock_determine_rate(). + + Signed-off-by: Boris Brezillon + Reviewed-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit 155e8b3b0ee320ae866b97dd31eba8a1f080a772) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index a99ccf9f056d..dafaa6b22724 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -436,6 +436,9 @@ struct bcm2835_clock_data { + const char *const *parents; + int num_mux_parents; + ++ /* Bitmap encoding which parents accept rate change propagation. */ ++ unsigned int set_rate_parent; ++ + u32 ctl_reg; + u32 div_reg; + +@@ -1017,10 +1020,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw) + return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0; + } + ++static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, ++ int parent_idx, ++ unsigned long rate, ++ u32 *div, ++ unsigned long *prate) ++{ ++ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); ++ struct bcm2835_cprman *cprman = clock->cprman; ++ const struct bcm2835_clock_data *data = clock->data; ++ unsigned long best_rate; ++ u32 curdiv, mindiv, maxdiv; ++ struct clk_hw *parent; ++ ++ parent = clk_hw_get_parent_by_index(hw, parent_idx); ++ ++ if (!(BIT(parent_idx) & data->set_rate_parent)) { ++ *prate = clk_hw_get_rate(parent); ++ *div = bcm2835_clock_choose_div(hw, rate, *prate, true); ++ ++ return bcm2835_clock_rate_from_divisor(clock, *prate, ++ *div); ++ } ++ ++ if (data->frac_bits) ++ dev_warn(cprman->dev, ++ "frac bits are not used when propagating rate change"); ++ ++ /* clamp to min divider of 2 if we're dealing with a mash clock */ ++ mindiv = data->is_mash_clock ? 2 : 1; ++ maxdiv = BIT(data->int_bits) - 1; ++ ++ /* TODO: Be smart, and only test a subset of the available divisors. */ ++ for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) { ++ unsigned long tmp_rate; ++ ++ tmp_rate = clk_hw_round_rate(parent, rate * curdiv); ++ tmp_rate /= curdiv; ++ if (curdiv == mindiv || ++ (tmp_rate > best_rate && tmp_rate <= rate)) ++ best_rate = tmp_rate; ++ ++ if (best_rate == rate) ++ break; ++ } ++ ++ *div = curdiv << CM_DIV_FRAC_BITS; ++ *prate = curdiv * best_rate; ++ ++ return best_rate; ++} ++ + static int bcm2835_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) + { +- struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct clk_hw *parent, *best_parent = NULL; + bool current_parent_is_pllc; + unsigned long rate, best_rate = 0; +@@ -1048,9 +1101,8 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw, + if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc) + continue; + +- prate = clk_hw_get_rate(parent); +- div = bcm2835_clock_choose_div(hw, req->rate, prate, true); +- rate = bcm2835_clock_rate_from_divisor(clock, prate, div); ++ rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, ++ &div, &prate); + if (rate > best_rate && rate <= req->rate) { + best_parent = parent; + best_prate = prate; +@@ -1271,6 +1323,13 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, + if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) + init.flags &= ~CLK_IS_CRITICAL; + ++ /* ++ * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate ++ * rate changes on at least of the parents. ++ */ ++ if (data->set_rate_parent) ++ init.flags |= CLK_SET_RATE_PARENT; ++ + if (data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1152_9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1152_9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1152_9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1152_9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,34 @@ +commit 9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b +Author: Boris Brezillon +Date: Thu Dec 1 22:00:20 2016 +0100 + + clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock + + The VEC clock requires needs to be set at exactly 108MHz. Allow rate + change propagation on PLLH_AUX to match this requirement wihtout + impacting other IPs (PLLH is currently only used by the HDMI encoder, + which cannot be enabled when the VEC encoder is enabled). + + Signed-off-by: Boris Brezillon + Reviewed-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index dafaa6b22724..0453d7c6a639 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1870,7 +1870,12 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_VECCTL, + .div_reg = CM_VECDIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ /* ++ * Allow rate change propagation only on PLLH_AUX which is ++ * assigned index 7 in the parent array. ++ */ ++ .set_rate_parent = BIT(7)), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1153_5f28a0d7bb1b8330fae2421334c9fb17b35fe93e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1153_5f28a0d7bb1b8330fae2421334c9fb17b35fe93e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1153_5f28a0d7bb1b8330fae2421334c9fb17b35fe93e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1153_5f28a0d7bb1b8330fae2421334c9fb17b35fe93e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,28 @@ +commit 5f28a0d7bb1b8330fae2421334c9fb17b35fe93e +Author: Boris Brezillon +Date: Mon Dec 12 09:00:53 2016 +0100 + + clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() + + best_rate is reported as potentially uninitialized by gcc. + + Signed-off-by: Boris Brezillon + Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks") + Reported-by: Stephen Rothwell + Reviewed-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit 2aab7a2055a1705c9e30920d95a596226999eb21) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 0453d7c6a639..9d895726ebb2 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1029,7 +1029,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; +- unsigned long best_rate; ++ unsigned long best_rate = 0; + u32 curdiv, mindiv, maxdiv; + struct clk_hw *parent; + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1154_c966aee30d85c527713cc84f6b59ce1d786a97d4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1154_c966aee30d85c527713cc84f6b59ce1d786a97d4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1154_c966aee30d85c527713cc84f6b59ce1d786a97d4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1154_c966aee30d85c527713cc84f6b59ce1d786a97d4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,171 @@ +commit c966aee30d85c527713cc84f6b59ce1d786a97d4 +Author: Eric Anholt +Date: Wed Jan 18 07:31:55 2017 +1100 + + clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers. + + Our core PLLs are intended to be configured once and left alone. With + the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would + change PLLD just to get closer to the requested DSI clock, thus + changing PLLD_PER, the UART and ethernet PHY clock rates downstream of + it, and breaking ethernet. + + We *do* want PLLH to change so that PLLH_AUX can be exactly the value + we want, though. Thus, we need to have a per-divider policy of + whether to pass rate changes up. + + Signed-off-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit 55486091bd1e1c5ed28c43c0d6b3392468a9adb5) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 9d895726ebb2..b58cff275658 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -428,6 +428,7 @@ struct bcm2835_pll_divider_data { + u32 load_mask; + u32 hold_mask; + u32 fixed_divider; ++ u32 flags; + }; + + struct bcm2835_clock_data { +@@ -1252,7 +1253,7 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman, + init.num_parents = 1; + init.name = divider_name; + init.ops = &bcm2835_pll_divider_clk_ops; +- init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED; ++ init.flags = data->flags | CLK_IGNORE_UNUSED; + + divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL); + if (!divider) +@@ -1475,7 +1476,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_CORE, + .load_mask = CM_PLLA_LOADCORE, + .hold_mask = CM_PLLA_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_PER] = REGISTER_PLL_DIV( + .name = "plla_per", + .source_pll = "plla", +@@ -1483,7 +1485,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_PER, + .load_mask = CM_PLLA_LOADPER, + .hold_mask = CM_PLLA_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( + .name = "plla_dsi0", + .source_pll = "plla", +@@ -1499,7 +1502,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLA_CCP2, + .load_mask = CM_PLLA_LOADCCP2, + .hold_mask = CM_PLLA_HOLDCCP2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( +@@ -1523,7 +1527,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLC is the core PLL, used to drive the core VPU clock. +@@ -1552,7 +1557,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE0, + .load_mask = CM_PLLC_LOADCORE0, + .hold_mask = CM_PLLC_HOLDCORE0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV( + .name = "pllc_core1", + .source_pll = "pllc", +@@ -1560,7 +1566,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE1, + .load_mask = CM_PLLC_LOADCORE1, + .hold_mask = CM_PLLC_HOLDCORE1, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV( + .name = "pllc_core2", + .source_pll = "pllc", +@@ -1568,7 +1575,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_CORE2, + .load_mask = CM_PLLC_LOADCORE2, + .hold_mask = CM_PLLC_HOLDCORE2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_PER] = REGISTER_PLL_DIV( + .name = "pllc_per", + .source_pll = "pllc", +@@ -1576,7 +1584,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLC_PER, + .load_mask = CM_PLLC_LOADPER, + .hold_mask = CM_PLLC_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLD is the display PLL, used to drive DSI display panels. +@@ -1605,7 +1614,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLD_CORE, + .load_mask = CM_PLLD_LOADCORE, + .hold_mask = CM_PLLD_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_PER] = REGISTER_PLL_DIV( + .name = "plld_per", + .source_pll = "plld", +@@ -1613,7 +1623,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLD_PER, + .load_mask = CM_PLLD_LOADPER, + .hold_mask = CM_PLLD_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV( + .name = "plld_dsi0", + .source_pll = "plld", +@@ -1658,7 +1669,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_RCAL, + .load_mask = CM_PLLH_LOADRCAL, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV( + .name = "pllh_aux", + .source_pll = "pllh", +@@ -1666,7 +1678,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", +@@ -1674,7 +1687,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .a2w_reg = A2W_PLLH_PIX, + .load_mask = CM_PLLH_LOADPIX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + + /* the clocks */ + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1155_bf3e7a7e02408555c756a42b9ef234ce96ff4b32.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1155_bf3e7a7e02408555c756a42b9ef234ce96ff4b32.patch --- linux-4.9.13/debian/patches/rpi/rpi_1155_bf3e7a7e02408555c756a42b9ef234ce96ff4b32.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1155_bf3e7a7e02408555c756a42b9ef234ce96ff4b32.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,240 @@ +commit bf3e7a7e02408555c756a42b9ef234ce96ff4b32 +Author: Eric Anholt +Date: Wed Jan 18 07:31:56 2017 +1100 + + clk: bcm2835: Register the DSI0/DSI1 pixel clocks. + + The DSI pixel clocks are muxed from clocks generated in the analog phy + by the DSI driver. In order to set them as parents, we need to do the + same name lookup dance on them as we do for our root oscillator. + + Signed-off-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit 8a39e9fa578229fd4604266c6ebb1a3a77d7994c) + +diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +index e56a1df3a9d3..dd906db34b32 100644 +--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt ++++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +@@ -16,7 +16,20 @@ Required properties: + - #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835.h + - reg: Specifies base physical address and size of the registers +-- clocks: The external oscillator clock phandle ++- clocks: phandles to the parent clocks used as input to the module, in ++ the following order: ++ ++ - External oscillator ++ - DSI0 byte clock ++ - DSI0 DDR2 clock ++ - DSI0 DDR clock ++ - DSI1 byte clock ++ - DSI1 DDR2 clock ++ - DSI1 DDR clock ++ ++ Only external oscillator is required. The DSI clocks may ++ not be present, in which case their children will be ++ unusable. + + Example: + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index b58cff275658..b2c277b378ee 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -297,11 +297,32 @@ + #define LOCK_TIMEOUT_NS 100000000 + #define BCM2835_MAX_FB_RATE 1750000000u + ++/* ++ * Names of clocks used within the driver that need to be replaced ++ * with an external parent's name. This array is in the order that ++ * the clocks node in the DT references external clocks. ++ */ ++static const char *const cprman_parent_names[] = { ++ "xosc", ++ "dsi0_byte", ++ "dsi0_ddr2", ++ "dsi0_ddr", ++ "dsi1_byte", ++ "dsi1_ddr2", ++ "dsi1_ddr", ++}; ++ + struct bcm2835_cprman { + struct device *dev; + void __iomem *regs; + spinlock_t regs_lock; /* spinlock for all clocks */ +- const char *osc_name; ++ ++ /* ++ * Real names of cprman clock parents looked up through ++ * of_clk_get_parent_name(), which will be used in the ++ * parent_names[] arrays for clock registration. ++ */ ++ const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)]; + + /* Must be last */ + struct clk_hw_onecell_data onecell; +@@ -907,6 +928,9 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock, + const struct bcm2835_clock_data *data = clock->data; + u64 temp; + ++ if (data->int_bits == 0 && data->frac_bits == 0) ++ return parent_rate; ++ + /* + * The divisor is a 12.12 fixed point field, but only some of + * the bits are populated in any given clock. +@@ -930,7 +954,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; +- u32 div = cprman_read(cprman, data->div_reg); ++ u32 div; ++ ++ if (data->int_bits == 0 && data->frac_bits == 0) ++ return parent_rate; ++ ++ div = cprman_read(cprman, data->div_reg); + + return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + } +@@ -1209,7 +1238,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, + memset(&init, 0, sizeof(init)); + + /* All of the PLLs derive from the external oscillator. */ +- init.parent_names = &cprman->osc_name; ++ init.parent_names = &cprman->real_parent_names[0]; + init.num_parents = 1; + init.name = data->name; + init.ops = &bcm2835_pll_clk_ops; +@@ -1295,18 +1324,22 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, + struct bcm2835_clock *clock; + struct clk_init_data init; + const char *parents[1 << CM_SRC_BITS]; +- size_t i; ++ size_t i, j; + int ret; + + /* +- * Replace our "xosc" references with the oscillator's +- * actual name. ++ * Replace our strings referencing parent clocks with the ++ * actual clock-output-name of the parent. + */ + for (i = 0; i < data->num_mux_parents; i++) { +- if (strcmp(data->parents[i], "xosc") == 0) +- parents[i] = cprman->osc_name; +- else +- parents[i] = data->parents[i]; ++ parents[i] = data->parents[i]; ++ ++ for (j = 0; j < ARRAY_SIZE(cprman_parent_names); j++) { ++ if (strcmp(parents[i], cprman_parent_names[j]) == 0) { ++ parents[i] = cprman->real_parent_names[j]; ++ break; ++ } ++ } + } + + memset(&init, 0, sizeof(init)); +@@ -1442,6 +1475,47 @@ static const char *const bcm2835_clock_vpu_parents[] = { + __VA_ARGS__) + + /* ++ * DSI parent clocks. The DSI byte/DDR/DDR2 clocks come from the DSI ++ * analog PHY. The _inv variants are generated internally to cprman, ++ * but we don't use them so they aren't hooked up. ++ */ ++static const char *const bcm2835_clock_dsi0_parents[] = { ++ "gnd", ++ "xosc", ++ "testdebug0", ++ "testdebug1", ++ "dsi0_ddr", ++ "dsi0_ddr_inv", ++ "dsi0_ddr2", ++ "dsi0_ddr2_inv", ++ "dsi0_byte", ++ "dsi0_byte_inv", ++}; ++ ++static const char *const bcm2835_clock_dsi1_parents[] = { ++ "gnd", ++ "xosc", ++ "testdebug0", ++ "testdebug1", ++ "dsi1_ddr", ++ "dsi1_ddr_inv", ++ "dsi1_ddr2", ++ "dsi1_ddr2_inv", ++ "dsi1_byte", ++ "dsi1_byte_inv", ++}; ++ ++#define REGISTER_DSI0_CLK(...) REGISTER_CLK( \ ++ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \ ++ .parents = bcm2835_clock_dsi0_parents, \ ++ __VA_ARGS__) ++ ++#define REGISTER_DSI1_CLK(...) REGISTER_CLK( \ ++ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \ ++ .parents = bcm2835_clock_dsi1_parents, \ ++ __VA_ARGS__) ++ ++/* + * the real definition of all the pll, pll_dividers and clocks + * these make use of the above REGISTER_* macros + */ +@@ -1904,6 +1978,18 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .div_reg = CM_DSI1EDIV, + .int_bits = 4, + .frac_bits = 8), ++ [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( ++ .name = "dsi0p", ++ .ctl_reg = CM_DSI0PCTL, ++ .div_reg = CM_DSI0PDIV, ++ .int_bits = 0, ++ .frac_bits = 0), ++ [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( ++ .name = "dsi1p", ++ .ctl_reg = CM_DSI1PCTL, ++ .div_reg = CM_DSI1PDIV, ++ .int_bits = 0, ++ .frac_bits = 0), + + /* the gates */ + +@@ -1962,8 +2048,19 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + +- cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0); +- if (!cprman->osc_name) ++ memcpy(cprman->real_parent_names, cprman_parent_names, ++ sizeof(cprman_parent_names)); ++ of_clk_parent_fill(dev->of_node, cprman->real_parent_names, ++ ARRAY_SIZE(cprman_parent_names)); ++ ++ /* ++ * Make sure the external oscillator has been registered. ++ * ++ * The other (DSI) clocks are not present on older device ++ * trees, which we still need to support for backwards ++ * compatibility. ++ */ ++ if (!cprman->real_parent_names[0]) + return -ENODEV; + + platform_set_drvdata(pdev, cprman); +diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h +index 360e00cefd35..a0c812b0fa39 100644 +--- a/include/dt-bindings/clock/bcm2835.h ++++ b/include/dt-bindings/clock/bcm2835.h +@@ -64,3 +64,5 @@ + #define BCM2835_CLOCK_CAM1 46 + #define BCM2835_CLOCK_DSI0E 47 + #define BCM2835_CLOCK_DSI1E 48 ++#define BCM2835_CLOCK_DSI0P 49 ++#define BCM2835_CLOCK_DSI1P 50 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1156_d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1156_d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1156_d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1156_d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,345 @@ +commit d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1 +Author: Eric Anholt +Date: Wed Jan 18 07:31:57 2017 +1100 + + clk: bcm2835: Add leaf clock measurement support, disabled by default + + This proved incredibly useful during debugging of the DSI driver, to + see if our clocks were running at rate we requested. Let's leave it + here for the next person interacting with clocks on the platform (and + so that hopefully we can just hook it up to debugfs some day). + + Signed-off-by: Eric Anholt + Signed-off-by: Stephen Boyd + (cherry picked from commit 3f9195811d8d829556c4cd88d3f9e56a80d5ba60) + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index b2c277b378ee..136e5d28f9ea 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -39,6 +39,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -98,7 +99,8 @@ + #define CM_SMIDIV 0x0b4 + /* no definition for 0x0b8 and 0x0bc */ + #define CM_TCNTCTL 0x0c0 +-#define CM_TCNTDIV 0x0c4 ++# define CM_TCNT_SRC1_SHIFT 12 ++#define CM_TCNTCNT 0x0c4 + #define CM_TECCTL 0x0c8 + #define CM_TECDIV 0x0cc + #define CM_TD0CTL 0x0d0 +@@ -338,6 +340,61 @@ static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg) + return readl(cprman->regs + reg); + } + ++/* Does a cycle of measuring a clock through the TCNT clock, which may ++ * source from many other clocks in the system. ++ */ ++static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman, ++ u32 tcnt_mux) ++{ ++ u32 osccount = 19200; /* 1ms */ ++ u32 count; ++ ktime_t timeout; ++ ++ spin_lock(&cprman->regs_lock); ++ ++ cprman_write(cprman, CM_TCNTCTL, CM_KILL); ++ ++ cprman_write(cprman, CM_TCNTCTL, ++ (tcnt_mux & CM_SRC_MASK) | ++ (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT); ++ ++ cprman_write(cprman, CM_OSCCOUNT, osccount); ++ ++ /* do a kind delay at the start */ ++ mdelay(1); ++ ++ /* Finish off whatever is left of OSCCOUNT */ ++ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); ++ while (cprman_read(cprman, CM_OSCCOUNT)) { ++ if (ktime_after(ktime_get(), timeout)) { ++ dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n"); ++ count = 0; ++ goto out; ++ } ++ cpu_relax(); ++ } ++ ++ /* Wait for BUSY to clear. */ ++ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); ++ while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) { ++ if (ktime_after(ktime_get(), timeout)) { ++ dev_err(cprman->dev, "timeout waiting for !BUSY\n"); ++ count = 0; ++ goto out; ++ } ++ cpu_relax(); ++ } ++ ++ count = cprman_read(cprman, CM_TCNTCNT); ++ ++ cprman_write(cprman, CM_TCNTCTL, 0); ++ ++out: ++ spin_unlock(&cprman->regs_lock); ++ ++ return count * 1000; ++} ++ + static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base, + struct debugfs_reg32 *regs, size_t nregs, + struct dentry *dentry) +@@ -473,6 +530,8 @@ struct bcm2835_clock_data { + + bool is_vpu_clock; + bool is_mash_clock; ++ ++ u32 tcnt_mux; + }; + + struct bcm2835_gate_data { +@@ -1008,6 +1067,17 @@ static int bcm2835_clock_on(struct clk_hw *hw) + CM_GATE); + spin_unlock(&cprman->regs_lock); + ++ /* Debug code to measure the clock once it's turned on to see ++ * if it's ticking at the rate we expect. ++ */ ++ if (data->tcnt_mux && false) { ++ dev_info(cprman->dev, ++ "clk %s: rate %ld, measure %ld\n", ++ data->name, ++ clk_hw_get_rate(hw), ++ bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux)); ++ } ++ + return 0; + } + +@@ -1774,7 +1844,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_OTPCTL, + .div_reg = CM_OTPDIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 6), + /* + * Used for a 1Mhz clock for the system clocksource, and also used + * bythe watchdog timer and the camera pulse generator. +@@ -1808,13 +1879,15 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_H264CTL, + .div_reg = CM_H264DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 1), + [BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK( + .name = "isp", + .ctl_reg = CM_ISPCTL, + .div_reg = CM_ISPDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 2), + + /* + * Secondary SDRAM clock. Used for low-voltage modes when the PLL +@@ -1825,13 +1898,15 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_SDCCTL, + .div_reg = CM_SDCDIV, + .int_bits = 6, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 3), + [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK( + .name = "v3d", + .ctl_reg = CM_V3DCTL, + .div_reg = CM_V3DDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 4), + /* + * VPU clock. This doesn't have an enable bit, since it drives + * the bus for everything else, and is special so it doesn't need +@@ -1845,7 +1920,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .int_bits = 12, + .frac_bits = 8, + .flags = CLK_IS_CRITICAL, +- .is_vpu_clock = true), ++ .is_vpu_clock = true, ++ .tcnt_mux = 5), + + /* clocks with per parent mux */ + [BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK( +@@ -1853,19 +1929,22 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_AVEOCTL, + .div_reg = CM_AVEODIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 38), + [BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK( + .name = "cam0", + .ctl_reg = CM_CAM0CTL, + .div_reg = CM_CAM0DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 14), + [BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK( + .name = "cam1", + .ctl_reg = CM_CAM1CTL, + .div_reg = CM_CAM1DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 15), + [BCM2835_CLOCK_DFT] = REGISTER_PER_CLK( + .name = "dft", + .ctl_reg = CM_DFTCTL, +@@ -1877,7 +1956,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_DPICTL, + .div_reg = CM_DPIDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 17), + + /* Arasan EMMC clock */ + [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( +@@ -1885,7 +1965,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_EMMCCTL, + .div_reg = CM_EMMCDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 39), + + /* General purpose (GPIO) clocks */ + [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( +@@ -1894,7 +1975,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .div_reg = CM_GP0DIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 20), + [BCM2835_CLOCK_GP1] = REGISTER_PER_CLK( + .name = "gp1", + .ctl_reg = CM_GP1CTL, +@@ -1902,7 +1984,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .int_bits = 12, + .frac_bits = 12, + .flags = CLK_IS_CRITICAL, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 21), + [BCM2835_CLOCK_GP2] = REGISTER_PER_CLK( + .name = "gp2", + .ctl_reg = CM_GP2CTL, +@@ -1917,40 +2000,46 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_HSMCTL, + .div_reg = CM_HSMDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 22), + [BCM2835_CLOCK_PCM] = REGISTER_PER_CLK( + .name = "pcm", + .ctl_reg = CM_PCMCTL, + .div_reg = CM_PCMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 23), + [BCM2835_CLOCK_PWM] = REGISTER_PER_CLK( + .name = "pwm", + .ctl_reg = CM_PWMCTL, + .div_reg = CM_PWMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 24), + [BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK( + .name = "slim", + .ctl_reg = CM_SLIMCTL, + .div_reg = CM_SLIMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 25), + [BCM2835_CLOCK_SMI] = REGISTER_PER_CLK( + .name = "smi", + .ctl_reg = CM_SMICTL, + .div_reg = CM_SMIDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 27), + [BCM2835_CLOCK_UART] = REGISTER_PER_CLK( + .name = "uart", + .ctl_reg = CM_UARTCTL, + .div_reg = CM_UARTDIV, + .int_bits = 10, +- .frac_bits = 12), ++ .frac_bits = 12, ++ .tcnt_mux = 28), + + /* TV encoder clock. Only operating frequency is 108Mhz. */ + [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( +@@ -1963,7 +2052,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + * Allow rate change propagation only on PLLH_AUX which is + * assigned index 7 in the parent array. + */ +- .set_rate_parent = BIT(7)), ++ .set_rate_parent = BIT(7), ++ .tcnt_mux = 29), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( +@@ -1971,25 +2061,29 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_DSI0ECTL, + .div_reg = CM_DSI0EDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 18), + [BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK( + .name = "dsi1e", + .ctl_reg = CM_DSI1ECTL, + .div_reg = CM_DSI1EDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 19), + [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( + .name = "dsi0p", + .ctl_reg = CM_DSI0PCTL, + .div_reg = CM_DSI0PDIV, + .int_bits = 0, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 12), + [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( + .name = "dsi1p", + .ctl_reg = CM_DSI1PCTL, + .div_reg = CM_DSI1PDIV, + .int_bits = 0, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 13), + + /* the gates */ + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1157_6dc092de9c10c8766169aecb48b0bb005c790ae5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1157_6dc092de9c10c8766169aecb48b0bb005c790ae5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1157_6dc092de9c10c8766169aecb48b0bb005c790ae5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1157_6dc092de9c10c8766169aecb48b0bb005c790ae5.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,577 @@ +commit 6dc092de9c10c8766169aecb48b0bb005c790ae5 +Author: Eric Anholt +Date: Tue Apr 26 13:46:13 2016 -0700 + + drm/panel: Add support for the Raspberry Pi 7" Touchscreen. + + This driver communicates with the Atmel microcontroller for sequencing + the poweron of the TC358762 DSI-DPI bridge and controlling the + backlight PWM. + + The following lines are required in config.txt, to keep the firmware + from trying to bash our I2C lines and steal the DSI interrupts: + + disable_touchscreen=1 + ignore_lcd=2 + mask_gpu_interrupt1=0x1000 + + This means that the firmware won't power on the panel at boot time (no + rainbow) and the touchscreen input won't work. The native input + driver for the touchscreen still needs to be written. + + v2: Set the same default orientation as the closed source firmware + used, which is the best for viewing angle. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig +index 62aba976e744..de7a56ab758b 100644 +--- a/drivers/gpu/drm/panel/Kconfig ++++ b/drivers/gpu/drm/panel/Kconfig +@@ -52,6 +52,14 @@ config DRM_PANEL_PANASONIC_VVX10F034N00 + WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some + Xperia Z2 tablets + ++config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN ++ tristate "Raspberry Pi 7-inch touchscreen panel" ++ depends on DRM_MIPI_DSI ++ help ++ Say Y here if you want to enable support for the Raspberry ++ Pi 7" Touchscreen. To compile this driver as a module, ++ choose M here. ++ + config DRM_PANEL_SAMSUNG_S6E8AA0 + tristate "Samsung S6E8AA0 DSI video mode panel" + depends on OF +diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile +index a5c7ec0236e0..e8a7ed280fff 100644 +--- a/drivers/gpu/drm/panel/Makefile ++++ b/drivers/gpu/drm/panel/Makefile +@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o + obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o + obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o + obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o ++obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o + obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o + obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o + obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o +diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +new file mode 100644 +index 000000000000..1a536fe4d040 +--- /dev/null ++++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +@@ -0,0 +1,514 @@ ++/* ++ * Copyright © 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Portions of this file (derived from panel-simple.c) are: ++ * ++ * Copyright (C) 2013, NVIDIA Corporation. All rights reserved. ++ * ++ * Permission is hereby granted, free of charge, to any person obtaining a ++ * copy of this software and associated documentation files (the "Software"), ++ * to deal in the Software without restriction, including without limitation ++ * the rights to use, copy, modify, merge, publish, distribute, sub license, ++ * and/or sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following conditions: ++ * ++ * The above copyright notice and this permission notice (including the ++ * next paragraph) shall be included in all copies or substantial portions ++ * of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR ++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, ++ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL ++ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER ++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER ++ * DEALINGS IN THE SOFTWARE. ++ */ ++ ++/** ++ * DOC: Raspberry Pi 7" touchscreen panel driver. ++ * ++ * The 7" touchscreen consists of a DPI LCD panel, a Toshiba ++ * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR ++ * controlling power management, the LCD PWM, and the touchscreen. ++ * ++ * This driver presents this device as a MIPI DSI panel to the DRM ++ * driver, and should expose the touchscreen as a HID device. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* I2C registers of the Atmel microcontroller. */ ++enum REG_ADDR { ++ REG_ID = 0x80, ++ REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip ++ REG_PORTB, ++ REG_PORTC, ++ REG_PORTD, ++ REG_POWERON, ++ REG_PWM, ++ REG_DDRA, ++ REG_DDRB, ++ REG_DDRC, ++ REG_DDRD, ++ REG_TEST, ++ REG_WR_ADDRL, ++ REG_WR_ADDRH, ++ REG_READH, ++ REG_READL, ++ REG_WRITEH, ++ REG_WRITEL, ++ REG_ID2, ++}; ++ ++/* We only turn the PWM on or off, without varying values. */ ++#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1 ++ ++/* DSI D-PHY Layer Registers */ ++#define D0W_DPHYCONTTX 0x0004 ++#define CLW_DPHYCONTRX 0x0020 ++#define D0W_DPHYCONTRX 0x0024 ++#define D1W_DPHYCONTRX 0x0028 ++#define COM_DPHYCONTRX 0x0038 ++#define CLW_CNTRL 0x0040 ++#define D0W_CNTRL 0x0044 ++#define D1W_CNTRL 0x0048 ++#define DFTMODE_CNTRL 0x0054 ++ ++/* DSI PPI Layer Registers */ ++#define PPI_STARTPPI 0x0104 ++#define PPI_BUSYPPI 0x0108 ++#define PPI_LINEINITCNT 0x0110 ++#define PPI_LPTXTIMECNT 0x0114 ++//#define PPI_LANEENABLE 0x0134 ++//#define PPI_TX_RX_TA 0x013C ++#define PPI_CLS_ATMR 0x0140 ++#define PPI_D0S_ATMR 0x0144 ++#define PPI_D1S_ATMR 0x0148 ++#define PPI_D0S_CLRSIPOCOUNT 0x0164 ++#define PPI_D1S_CLRSIPOCOUNT 0x0168 ++#define CLS_PRE 0x0180 ++#define D0S_PRE 0x0184 ++#define D1S_PRE 0x0188 ++#define CLS_PREP 0x01A0 ++#define D0S_PREP 0x01A4 ++#define D1S_PREP 0x01A8 ++#define CLS_ZERO 0x01C0 ++#define D0S_ZERO 0x01C4 ++#define D1S_ZERO 0x01C8 ++#define PPI_CLRFLG 0x01E0 ++#define PPI_CLRSIPO 0x01E4 ++#define HSTIMEOUT 0x01F0 ++#define HSTIMEOUTENABLE 0x01F4 ++ ++/* DSI Protocol Layer Registers */ ++#define DSI_STARTDSI 0x0204 ++#define DSI_BUSYDSI 0x0208 ++#define DSI_LANEENABLE 0x0210 ++# define DSI_LANEENABLE_CLOCK BIT(0) ++# define DSI_LANEENABLE_D0 BIT(1) ++# define DSI_LANEENABLE_D1 BIT(2) ++ ++#define DSI_LANESTATUS0 0x0214 ++#define DSI_LANESTATUS1 0x0218 ++#define DSI_INTSTATUS 0x0220 ++#define DSI_INTMASK 0x0224 ++#define DSI_INTCLR 0x0228 ++#define DSI_LPTXTO 0x0230 ++#define DSI_MODE 0x0260 ++#define DSI_PAYLOAD0 0x0268 ++#define DSI_PAYLOAD1 0x026C ++#define DSI_SHORTPKTDAT 0x0270 ++#define DSI_SHORTPKTREQ 0x0274 ++#define DSI_BTASTA 0x0278 ++#define DSI_BTACLR 0x027C ++ ++/* DSI General Registers */ ++#define DSIERRCNT 0x0300 ++#define DSISIGMOD 0x0304 ++ ++/* DSI Application Layer Registers */ ++#define APLCTRL 0x0400 ++#define APLSTAT 0x0404 ++#define APLERR 0x0408 ++#define PWRMOD 0x040C ++#define RDPKTLN 0x0410 ++#define PXLFMT 0x0414 ++#define MEMWRCMD 0x0418 ++ ++/* LCDC/DPI Host Registers */ ++#define LCDCTRL 0x0420 ++#define HSR 0x0424 ++#define HDISPR 0x0428 ++#define VSR 0x042C ++#define VDISPR 0x0430 ++#define VFUEN 0x0434 ++ ++/* DBI-B Host Registers */ ++#define DBIBCTRL 0x0440 ++ ++/* SPI Master Registers */ ++#define SPICMR 0x0450 ++#define SPITCR 0x0454 ++ ++/* System Controller Registers */ ++#define SYSSTAT 0x0460 ++#define SYSCTRL 0x0464 ++#define SYSPLL1 0x0468 ++#define SYSPLL2 0x046C ++#define SYSPLL3 0x0470 ++#define SYSPMCTRL 0x047C ++ ++/* GPIO Registers */ ++#define GPIOC 0x0480 ++#define GPIOO 0x0484 ++#define GPIOI 0x0488 ++ ++/* I2C Registers */ ++#define I2CCLKCTRL 0x0490 ++ ++/* Chip/Rev Registers */ ++#define IDREG 0x04A0 ++ ++/* Debug Registers */ ++#define WCMDQUEUE 0x0500 ++#define RCMDQUEUE 0x0504 ++ ++struct rpi_touchscreen { ++ struct drm_panel base; ++ struct mipi_dsi_device *dsi; ++ struct i2c_client *bridge_i2c; ++ ++ /* Version of the firmware on the bridge chip */ ++ int atmel_ver; ++}; ++ ++static const struct drm_display_mode rpi_touchscreen_modes[] = { ++ { ++ /* The DSI PLL can only integer divide from the 2Ghz ++ * PLLD, giving us few choices. We pick a divide by 3 ++ * as our DSI HS clock, giving us a pixel clock of ++ * that divided by 24 bits. Pad out HFP to get our ++ * panel to refresh at 60Hz, even if that doesn't ++ * match the datasheet. ++ */ ++#define PIXEL_CLOCK ((2000000000 / 3) / 24) ++#define VREFRESH 60 ++#define VTOTAL (480 + 7 + 2 + 21) ++#define HACT 800 ++#define HSW 2 ++#define HBP 46 ++#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP)) ++ ++ .clock = PIXEL_CLOCK / 1000, ++ .hdisplay = HACT, ++ .hsync_start = HACT + HFP, ++ .hsync_end = HACT + HFP + HSW, ++ .htotal = HACT + HFP + HSW + HBP, ++ .vdisplay = 480, ++ .vsync_start = 480 + 7, ++ .vsync_end = 480 + 7 + 2, ++ .vtotal = VTOTAL, ++ .vrefresh = 60, ++ }, ++}; ++ ++static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel) ++{ ++ return container_of(panel, struct rpi_touchscreen, base); ++} ++ ++static u8 rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg) ++{ ++ return i2c_smbus_read_byte_data(ts->bridge_i2c, reg); ++} ++ ++static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, ++ u8 reg, u8 val) ++{ ++ int ret; ++ ++ ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val); ++ if (ret) ++ dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); ++} ++ ++static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) ++{ ++#if 0 ++ /* The firmware uses LP DSI transactions like this to bring up ++ * the hardware, which should be faster than using I2C to then ++ * pass to the Toshiba. However, I was unable to get it to ++ * work. ++ */ ++ u8 msg[] = { ++ reg, ++ reg >> 8, ++ val, ++ val >> 8, ++ val >> 16, ++ val >> 24, ++ }; ++ ++ mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); ++#else ++ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); ++ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); ++ rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); ++ rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); ++#endif ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_disable(struct drm_panel *panel) ++{ ++ struct rpi_touchscreen *ts = panel_to_ts(panel); ++ ++ rpi_touchscreen_i2c_write(ts, REG_PWM, 0); ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++ udelay(1); ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_noop(struct drm_panel *panel) ++{ ++ return 0; ++} ++ ++static int rpi_touchscreen_enable(struct drm_panel *panel) ++{ ++ struct rpi_touchscreen *ts = panel_to_ts(panel); ++ int i; ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 1); ++ /* Wait for nPWRDWN to go low to indicate poweron is done. */ ++ for (i = 0; i < 100; i++) { ++ if (rpi_touchscreen_i2c_read(ts, REG_PORTB) & 1) ++ break; ++ } ++ ++ rpi_touchscreen_write(ts, DSI_LANEENABLE, ++ DSI_LANEENABLE_CLOCK | ++ DSI_LANEENABLE_D0 | ++ (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0)); ++ rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05); ++ rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05); ++ rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00); ++ rpi_touchscreen_write(ts, PPI_D1S_ATMR, 0x00); ++ rpi_touchscreen_write(ts, PPI_LPTXTIMECNT, 0x03); ++ ++ rpi_touchscreen_write(ts, SPICMR, 0x00); ++ rpi_touchscreen_write(ts, LCDCTRL, 0x00100150); ++ rpi_touchscreen_write(ts, SYSCTRL, 0x040f); ++ msleep(100); ++ ++ rpi_touchscreen_write(ts, PPI_STARTPPI, 0x01); ++ rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01); ++ msleep(100); ++ ++ /* Turn on the backlight. */ ++ rpi_touchscreen_i2c_write(ts, REG_PWM, 255); ++ ++ /* Default to the same orientation as the closed source ++ * firmware used for the panel. Runtime rotation ++ * configuration will be supported using VC4's plane ++ * orientation bits. ++ */ ++ rpi_touchscreen_i2c_write(ts, REG_PORTA, BIT(2)); ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_get_modes(struct drm_panel *panel) ++{ ++ struct drm_connector *connector = panel->connector; ++ struct drm_device *drm = panel->drm; ++ unsigned int i, num = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) { ++ const struct drm_display_mode *m = &rpi_touchscreen_modes[i]; ++ struct drm_display_mode *mode; ++ ++ mode = drm_mode_duplicate(drm, m); ++ if (!mode) { ++ dev_err(drm->dev, "failed to add mode %ux%u@%u\n", ++ m->hdisplay, m->vdisplay, m->vrefresh); ++ continue; ++ } ++ ++ mode->type |= DRM_MODE_TYPE_DRIVER; ++ ++ if (i == 0) ++ mode->type |= DRM_MODE_TYPE_PREFERRED; ++ ++ drm_mode_set_name(mode); ++ ++ drm_mode_probed_add(connector, mode); ++ num++; ++ } ++ ++ connector->display_info.bpc = 8; ++ connector->display_info.width_mm = 154; ++ connector->display_info.height_mm = 86; ++ ++ return num; ++} ++ ++static const struct drm_panel_funcs rpi_touchscreen_funcs = { ++ .disable = rpi_touchscreen_disable, ++ .unprepare = rpi_touchscreen_noop, ++ .prepare = rpi_touchscreen_noop, ++ .enable = rpi_touchscreen_enable, ++ .get_modes = rpi_touchscreen_get_modes, ++}; ++ ++static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev, ++ const char *name) ++{ ++ struct device_node *node; ++ struct i2c_client *client; ++ ++ node = of_parse_phandle(dev->of_node, name, 0); ++ if (!node) ++ return ERR_PTR(-ENODEV); ++ ++ client = of_find_i2c_device_by_node(node); ++ ++ of_node_put(node); ++ ++ return client; ++} ++ ++static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts; ++ int ret, ver; ++ ++ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); ++ if (!ts) ++ return -ENOMEM; ++ ++ dev_set_drvdata(dev, ts); ++ ++ ts->dsi = dsi; ++ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | ++ MIPI_DSI_MODE_VIDEO_SYNC_PULSE | ++ MIPI_DSI_MODE_LPM); ++ dsi->format = MIPI_DSI_FMT_RGB888; ++ dsi->lanes = 1; ++ ++ ts->bridge_i2c = ++ rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge"); ++ if (IS_ERR(ts->bridge_i2c)) { ++ ret = -EPROBE_DEFER; ++ return ret; ++ } ++ ++ ver = rpi_touchscreen_i2c_read(ts, REG_ID); ++ if (ver < 0) { ++ dev_err(dev, "Atmel I2C read failed: %d\n", ver); ++ return -ENODEV; ++ } ++ ++ switch (ver) { ++ case 0xde: ++ ts->atmel_ver = 1; ++ break; ++ case 0xc3: ++ ts->atmel_ver = 2; ++ break; ++ default: ++ dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver); ++ return -ENODEV; ++ } ++ ++ /* Turn off at boot, so we can cleanly sequence powering on. */ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++ ++ drm_panel_init(&ts->base); ++ ts->base.dev = dev; ++ ts->base.funcs = &rpi_touchscreen_funcs; ++ ++ ret = drm_panel_add(&ts->base); ++ if (ret < 0) ++ goto err_release_bridge; ++ ++ return mipi_dsi_attach(dsi); ++ ++err_release_bridge: ++ put_device(&ts->bridge_i2c->dev); ++ return ret; ++} ++ ++static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts = dev_get_drvdata(dev); ++ int ret; ++ ++ ret = mipi_dsi_detach(dsi); ++ if (ret < 0) { ++ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); ++ return ret; ++ } ++ ++ drm_panel_detach(&ts->base); ++ drm_panel_remove(&ts->base); ++ ++ put_device(&ts->bridge_i2c->dev); ++ ++ return 0; ++} ++ ++static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts = dev_get_drvdata(dev); ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++} ++ ++static const struct of_device_id rpi_touchscreen_of_match[] = { ++ { .compatible = "raspberrypi,touchscreen" }, ++ { } /* sentinel */ ++}; ++MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match); ++ ++static struct mipi_dsi_driver rpi_touchscreen_driver = { ++ .driver = { ++ .name = "raspberrypi-touchscreen", ++ .of_match_table = rpi_touchscreen_of_match, ++ }, ++ .probe = rpi_touchscreen_dsi_probe, ++ .remove = rpi_touchscreen_dsi_remove, ++ .shutdown = rpi_touchscreen_dsi_shutdown, ++}; ++module_mipi_dsi_driver(rpi_touchscreen_driver); ++ ++MODULE_AUTHOR("Eric Anholt "); ++MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1158_128784ec5a432168280107eba10e8caabe7fb2c0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1158_128784ec5a432168280107eba10e8caabe7fb2c0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1158_128784ec5a432168280107eba10e8caabe7fb2c0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1158_128784ec5a432168280107eba10e8caabe7fb2c0.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,47 @@ +commit 128784ec5a432168280107eba10e8caabe7fb2c0 +Author: Eric Anholt +Date: Thu Jun 2 12:29:45 2016 -0700 + + BCM270X: Add the DSI panel to the defconfig. + + Signed-off-by: Eric Anholt + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 858143b9b68a..669edd7544d7 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -833,6 +833,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index f0b87d15e959..9a9cd1cdcb2f 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -827,6 +827,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 8c4392344eb4..301611d2283f 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -816,6 +816,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1159_370a09d78cf65fda2f8fc9c7a478e99d510dfcd0.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1159_370a09d78cf65fda2f8fc9c7a478e99d510dfcd0.patch --- linux-4.9.13/debian/patches/rpi/rpi_1159_370a09d78cf65fda2f8fc9c7a478e99d510dfcd0.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1159_370a09d78cf65fda2f8fc9c7a478e99d510dfcd0.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,102 @@ +commit 370a09d78cf65fda2f8fc9c7a478e99d510dfcd0 +Author: Eric Anholt +Date: Tue Dec 13 15:15:10 2016 -0800 + + ARM: bcm2835: dt: Add the DSI module nodes and clocks. + + The modules stay disabled by default, and if you want to enable DSI + you'll need an overlay that connects a panel to it. + + Signed-off-by: Eric Anholt + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index e9b47b2bbc33..365648898f3a 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -84,3 +84,11 @@ + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; + }; ++ ++&dsi0 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; ++}; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 51cdefbf5eb2..41776b97b4b6 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -93,10 +93,13 @@ + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + +- /* CPRMAN derives everything from the platform's +- * oscillator. ++ /* CPRMAN derives almost everything from the ++ * platform's oscillator. However, the DSI ++ * pixel clocks come from the DSI analog PHY. + */ +- clocks = <&clk_osc>; ++ clocks = <&clk_osc>, ++ <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, ++ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; + }; + + rng@7e104000 { +@@ -188,6 +191,26 @@ + interrupts = <2 14>; /* pwa1 */ + }; + ++ dsi0: dsi@7e209000 { ++ compatible = "brcm,bcm2835-dsi0"; ++ reg = <0x7e209000 0x78>; ++ interrupts = <2 4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ ++ clocks = <&clocks BCM2835_PLLA_DSI0>, ++ <&clocks BCM2835_CLOCK_DSI0E>, ++ <&clocks BCM2835_CLOCK_DSI0P>; ++ clock-names = "phy", "escape", "pixel"; ++ ++ clock-output-names = "dsi0_byte", ++ "dsi0_ddr2", ++ "dsi0_ddr"; ++ ++ status = "disabled"; ++ }; ++ + aux: aux@0x7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; +@@ -247,6 +270,26 @@ + interrupts = <2 1>; + }; + ++ dsi1: dsi@7e700000 { ++ compatible = "brcm,bcm2835-dsi1"; ++ reg = <0x7e700000 0x8c>; ++ interrupts = <2 12>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ ++ clocks = <&clocks BCM2835_PLLD_DSI1>, ++ <&clocks BCM2835_CLOCK_DSI1E>, ++ <&clocks BCM2835_CLOCK_DSI1P>; ++ clock-names = "phy", "escape", "pixel"; ++ ++ clock-output-names = "dsi1_byte", ++ "dsi1_ddr2", ++ "dsi1_ddr"; ++ ++ status = "disabled"; ++ }; ++ + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1160_246446d8a21c8781de5e03ace523e53d55018400.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1160_246446d8a21c8781de5e03ace523e53d55018400.patch --- linux-4.9.13/debian/patches/rpi/rpi_1160_246446d8a21c8781de5e03ace523e53d55018400.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1160_246446d8a21c8781de5e03ace523e53d55018400.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,144 @@ +commit 246446d8a21c8781de5e03ace523e53d55018400 +Author: Eric Anholt +Date: Thu Jun 2 15:09:35 2016 -0700 + + BCM270X: Enable the DSI panel node in the VC4 overlay. + + Signed-off-by: Eric Anholt + +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +index 360da5c928dc..51f575e5d201 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -154,3 +154,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts +index 9c49659ab246..028ef91a6c4f 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -144,3 +144,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 2 0 ++ &gpio 3 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +index 19c83823420f..a4ffeff9fda6 100644 +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -154,3 +154,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi +index 36d853715f23..caa663935186 100644 +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -137,6 +137,29 @@ + /* Add alias */ + status = "disabled"; + }; ++ ++ i2c_dsi: i2cdsi { ++ /* We have to use i2c-gpio because the ++ * firmware is also polling another device ++ * using the only hardware I2C bus that could ++ * connect to these pins. ++ */ ++ compatible = "i2c-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ ++ pitouchscreen_bridge: bridge@45 { ++ compatible = "raspberrypi,touchscreen-bridge-i2c"; ++ reg = <0x45>; ++ }; ++ ++ pitouchscreen_touch: bridge@38 { ++ compatible = "raspberrypi,touchscreen-ts-i2c"; ++ reg = <0x38>; ++ }; ++ }; ++ + }; + + vdd_5v0_reg: fixedregulator_5v0 { +@@ -155,3 +178,7 @@ + regulator-always-on; + }; + }; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +index 12764a3495b2..d29ba72de727 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -201,3 +201,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 44 0 ++ &gpio 45 0>; ++}; +diff --git a/arch/arm/boot/dts/bcm2710.dtsi b/arch/arm/boot/dts/bcm2710.dtsi +index 3e134a120861..3fabac6a93e8 100644 +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -145,4 +145,3 @@ + interrupt-parent = <&local_intc>; + interrupts = <8>; + }; +- +diff --git a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +index 4f1cc20f90dc..f25cd9a39368 100644 +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -126,6 +126,28 @@ + }; + }; + ++ fragment@16 { ++ target = <&dsi1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pitouchscreen: panel@0 { ++ compatible = "raspberrypi,touchscreen"; ++ reg = <0>; ++ raspberrypi,touchscreen-bridge = <&pitouchscreen_bridge>; ++ }; ++ }; ++ }; ++ ++ fragment@17 { ++ target = <&i2c_dsi>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1161_a7f8a9344c86650d268a2830375bb277d266634b.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1161_a7f8a9344c86650d268a2830375bb277d266634b.patch --- linux-4.9.13/debian/patches/rpi/rpi_1161_a7f8a9344c86650d268a2830375bb277d266634b.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1161_a7f8a9344c86650d268a2830375bb277d266634b.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,67 @@ +commit a7f8a9344c86650d268a2830375bb277d266634b +Author: Eric Anholt +Date: Thu Oct 20 16:48:12 2016 -0700 + + drm/vc4: Fix termination of the initial scan for branch targets. + + The loop is scanning until the original max_ip (size of the BO), but + we want to not examine any code after the PROG_END's delay slots. + There was a block trying to do that, except that we had some early + continue statements if the signal wasn't a PROG_END or a BRANCH. + + The failure mode would be that a valid shader is rejected because some + undefined memory after the PROG_END slots is parsed as a branch and + the rest of its setup is illegal. I haven't seen this in the wild, + but valgrind was complaining when about this up in the userland + simulator mode. + + Signed-off-by: Eric Anholt + (cherry picked from commit 457e67a728696c4f8e6423c64e93def50530db9a) + +diff --git a/drivers/gpu/drm/vc4/vc4_validate_shaders.c b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +index 2543cf5b8b51..917321ce832f 100644 +--- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c ++++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +@@ -608,9 +608,7 @@ static bool + vc4_validate_branches(struct vc4_shader_validation_state *validation_state) + { + uint32_t max_branch_target = 0; +- bool found_shader_end = false; + int ip; +- int shader_end_ip = 0; + int last_branch = -2; + + for (ip = 0; ip < validation_state->max_ip; ip++) { +@@ -621,8 +619,13 @@ vc4_validate_branches(struct vc4_shader_validation_state *validation_state) + uint32_t branch_target_ip; + + if (sig == QPU_SIG_PROG_END) { +- shader_end_ip = ip; +- found_shader_end = true; ++ /* There are two delay slots after program end is ++ * signaled that are still executed, then we're ++ * finished. validation_state->max_ip is the ++ * instruction after the last valid instruction in the ++ * program. ++ */ ++ validation_state->max_ip = ip + 3; + continue; + } + +@@ -676,15 +679,9 @@ vc4_validate_branches(struct vc4_shader_validation_state *validation_state) + } + set_bit(after_delay_ip, validation_state->branch_targets); + max_branch_target = max(max_branch_target, after_delay_ip); +- +- /* There are two delay slots after program end is signaled +- * that are still executed, then we're finished. +- */ +- if (found_shader_end && ip == shader_end_ip + 2) +- break; + } + +- if (max_branch_target > shader_end_ip) { ++ if (max_branch_target > validation_state->max_ip - 3) { + DRM_ERROR("Branch landed after QPU_SIG_PROG_END"); + return false; + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1162_b27b57f21ab839bcf5d4d4c7599765c8afa55fee.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1162_b27b57f21ab839bcf5d4d4c7599765c8afa55fee.patch --- linux-4.9.13/debian/patches/rpi/rpi_1162_b27b57f21ab839bcf5d4d4c7599765c8afa55fee.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1162_b27b57f21ab839bcf5d4d4c7599765c8afa55fee.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,57 @@ +commit b27b57f21ab839bcf5d4d4c7599765c8afa55fee +Author: Eric Anholt +Date: Thu Nov 3 18:53:10 2016 -0700 + + drm/vc4: Add support for rendering with ETC1 textures. + + The validation for it ends up being quite simple, but I hadn't got + around to it before merging the driver. For backwards compatibility, + we also need to add a flag so that the userspace GL driver can easily + tell if the kernel will allow ETC1 textures (on an old kernel, it will + continue to convert to RGBA8) + + Signed-off-by: Eric Anholt + (cherry picked from commit 7154d76fedf549607afbc0d13db9aaf02da5cebf) + +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 6c4a4fbc86d0..157e08ab2777 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -78,6 +78,7 @@ static int vc4_get_param_ioctl(struct drm_device *dev, void *data, + pm_runtime_put(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: ++ case DRM_VC4_PARAM_SUPPORTS_ETC1: + args->value = true; + break; + default: +diff --git a/drivers/gpu/drm/vc4/vc4_validate.c b/drivers/gpu/drm/vc4/vc4_validate.c +index 26503e307438..e18f88203d32 100644 +--- a/drivers/gpu/drm/vc4/vc4_validate.c ++++ b/drivers/gpu/drm/vc4/vc4_validate.c +@@ -644,6 +644,13 @@ reloc_tex(struct vc4_exec_info *exec, + cpp = 1; + break; + case VC4_TEXTURE_TYPE_ETC1: ++ /* ETC1 is arranged as 64-bit blocks, where each block is 4x4 ++ * pixels. ++ */ ++ cpp = 8; ++ width = (width + 3) >> 2; ++ height = (height + 3) >> 2; ++ break; + case VC4_TEXTURE_TYPE_BW1: + case VC4_TEXTURE_TYPE_A4: + case VC4_TEXTURE_TYPE_A1: +diff --git a/include/uapi/drm/vc4_drm.h b/include/uapi/drm/vc4_drm.h +index ad7edc3edf7c..69caa21f0cb2 100644 +--- a/include/uapi/drm/vc4_drm.h ++++ b/include/uapi/drm/vc4_drm.h +@@ -286,6 +286,7 @@ struct drm_vc4_get_hang_state { + #define DRM_VC4_PARAM_V3D_IDENT1 1 + #define DRM_VC4_PARAM_V3D_IDENT2 2 + #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 ++#define DRM_VC4_PARAM_SUPPORTS_ETC1 4 + + struct drm_vc4_get_param { + __u32 param; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1163_0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1163_0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1163_0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1163_0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,79 @@ +commit 0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4 +Author: Eric Anholt +Date: Fri Nov 4 15:58:38 2016 -0700 + + drm/vc4: Use runtime autosuspend to avoid thrashing V3D power state. + + The pm_runtime_put() we were using immediately released power on the + device, which meant that we were generally turning the device off and + on once per frame. In many profiles I've looked at, that added up to + about 1% of CPU time, but this could get worse in the case of frequent + rendering and readback (as may happen in X rendering). By keeping the + device on until we've been idle for a couple of frames, we drop the + overhead of runtime PM down to sub-.1%. + + Signed-off-by: Eric Anholt + (cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147) + +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 157e08ab2777..8302bd788be4 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -61,21 +61,24 @@ static int vc4_get_param_ioctl(struct drm_device *dev, void *data, + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT0); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_V3D_IDENT1: + ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT1); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_V3D_IDENT2: + ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT2); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: + case DRM_VC4_PARAM_SUPPORTS_ETC1: +diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c +index 18e37171e9c8..ab3016982466 100644 +--- a/drivers/gpu/drm/vc4/vc4_gem.c ++++ b/drivers/gpu/drm/vc4/vc4_gem.c +@@ -711,8 +711,10 @@ vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec) + } + + mutex_lock(&vc4->power_lock); +- if (--vc4->power_refcount == 0) +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ if (--vc4->power_refcount == 0) { ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); ++ } + mutex_unlock(&vc4->power_lock); + + kfree(exec); +diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c +index e6d3c6028341..7cc346ad9b0b 100644 +--- a/drivers/gpu/drm/vc4/vc4_v3d.c ++++ b/drivers/gpu/drm/vc4/vc4_v3d.c +@@ -222,6 +222,8 @@ static int vc4_v3d_bind(struct device *dev, struct device *master, void *data) + return ret; + } + ++ pm_runtime_use_autosuspend(dev); ++ pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */ + pm_runtime_enable(dev); + + return 0; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1164_dab785645e03fc00b665a69e209a8a1f19f6dfd2.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1164_dab785645e03fc00b665a69e209a8a1f19f6dfd2.patch --- linux-4.9.13/debian/patches/rpi/rpi_1164_dab785645e03fc00b665a69e209a8a1f19f6dfd2.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1164_dab785645e03fc00b665a69e209a8a1f19f6dfd2.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,232 @@ +commit dab785645e03fc00b665a69e209a8a1f19f6dfd2 +Author: Jonas Pfeil +Date: Tue Nov 8 00:18:39 2016 +0100 + + drm/vc4: Add fragment shader threading support + + FS threading brings performance improvements of 0-20% in glmark2. + + The validation code checks for thread switch signals and ensures that + the registers of the other thread are not touched, and that our clamps + are not live across thread switches. It also checks that the + threading and branching instructions do not interfere. + + (Original patch by Jonas, changes by anholt for style cleanup, + removing validation the kernel doesn't need to do, and adding the flag + for userspace). + + v2: Minor style fixes from checkpatch. + + Signed-off-by: Jonas Pfeil + Signed-off-by: Eric Anholt + (cherry picked from commit c778cc5df944291dcdb1ca7a6bb781fbc22550c5) + +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 8302bd788be4..3abaa0f85da1 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -82,6 +82,7 @@ static int vc4_get_param_ioctl(struct drm_device *dev, void *data, + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: + case DRM_VC4_PARAM_SUPPORTS_ETC1: ++ case DRM_VC4_PARAM_SUPPORTS_THREADED_FS: + args->value = true; + break; + default: +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index e1f6ab747f36..e15eb37ca619 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -384,6 +384,8 @@ struct vc4_validated_shader_info { + + uint32_t num_uniform_addr_offsets; + uint32_t *uniform_addr_offsets; ++ ++ bool is_threaded; + }; + + /** +diff --git a/drivers/gpu/drm/vc4/vc4_validate.c b/drivers/gpu/drm/vc4/vc4_validate.c +index e18f88203d32..9fd171c361c2 100644 +--- a/drivers/gpu/drm/vc4/vc4_validate.c ++++ b/drivers/gpu/drm/vc4/vc4_validate.c +@@ -789,11 +789,6 @@ validate_gl_shader_rec(struct drm_device *dev, + exec->shader_rec_v += roundup(packet_size, 16); + exec->shader_rec_size -= packet_size; + +- if (!(*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD)) { +- DRM_ERROR("Multi-threaded fragment shaders not supported.\n"); +- return -EINVAL; +- } +- + for (i = 0; i < shader_reloc_count; i++) { + if (src_handles[i] > exec->bo_count) { + DRM_ERROR("Shader handle %d too big\n", src_handles[i]); +@@ -810,6 +805,18 @@ validate_gl_shader_rec(struct drm_device *dev, + return -EINVAL; + } + ++ if (((*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD) == 0) != ++ to_vc4_bo(&bo[0]->base)->validated_shader->is_threaded) { ++ DRM_ERROR("Thread mode of CL and FS do not match\n"); ++ return -EINVAL; ++ } ++ ++ if (to_vc4_bo(&bo[1]->base)->validated_shader->is_threaded || ++ to_vc4_bo(&bo[2]->base)->validated_shader->is_threaded) { ++ DRM_ERROR("cs and vs cannot be threaded\n"); ++ return -EINVAL; ++ } ++ + for (i = 0; i < shader_reloc_count; i++) { + struct vc4_validated_shader_info *validated_shader; + uint32_t o = shader_reloc_offsets[i]; +diff --git a/drivers/gpu/drm/vc4/vc4_validate_shaders.c b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +index 917321ce832f..5dba13dd1e9b 100644 +--- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c ++++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +@@ -83,6 +83,13 @@ struct vc4_shader_validation_state { + * basic blocks. + */ + bool needs_uniform_address_for_loop; ++ ++ /* Set when we find an instruction writing the top half of the ++ * register files. If we allowed writing the unusable regs in ++ * a threaded shader, then the other shader running on our ++ * QPU's clamp validation would be invalid. ++ */ ++ bool all_registers_used; + }; + + static uint32_t +@@ -119,6 +126,13 @@ raddr_add_a_to_live_reg_index(uint64_t inst) + } + + static bool ++live_reg_is_upper_half(uint32_t lri) ++{ ++ return (lri >= 16 && lri < 32) || ++ (lri >= 32 + 16 && lri < 32 + 32); ++} ++ ++static bool + is_tmu_submit(uint32_t waddr) + { + return (waddr == QPU_W_TMU0_S || +@@ -390,6 +404,9 @@ check_reg_write(struct vc4_validated_shader_info *validated_shader, + } else { + validation_state->live_immediates[lri] = ~0; + } ++ ++ if (live_reg_is_upper_half(lri)) ++ validation_state->all_registers_used = true; + } + + switch (waddr) { +@@ -598,6 +615,11 @@ check_instruction_reads(struct vc4_validated_shader_info *validated_shader, + } + } + ++ if ((raddr_a >= 16 && raddr_a < 32) || ++ (raddr_b >= 16 && raddr_b < 32 && sig != QPU_SIG_SMALL_IMM)) { ++ validation_state->all_registers_used = true; ++ } ++ + return true; + } + +@@ -753,6 +775,7 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + { + bool found_shader_end = false; + int shader_end_ip = 0; ++ uint32_t last_thread_switch_ip = -3; + uint32_t ip; + struct vc4_validated_shader_info *validated_shader = NULL; + struct vc4_shader_validation_state validation_state; +@@ -785,6 +808,17 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + if (!vc4_handle_branch_target(&validation_state)) + goto fail; + ++ if (ip == last_thread_switch_ip + 3) { ++ /* Reset r0-r3 live clamp data */ ++ int i; ++ ++ for (i = 64; i < LIVE_REG_COUNT; i++) { ++ validation_state.live_min_clamp_offsets[i] = ~0; ++ validation_state.live_max_clamp_regs[i] = false; ++ validation_state.live_immediates[i] = ~0; ++ } ++ } ++ + switch (sig) { + case QPU_SIG_NONE: + case QPU_SIG_WAIT_FOR_SCOREBOARD: +@@ -794,6 +828,8 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + case QPU_SIG_LOAD_TMU1: + case QPU_SIG_PROG_END: + case QPU_SIG_SMALL_IMM: ++ case QPU_SIG_THREAD_SWITCH: ++ case QPU_SIG_LAST_THREAD_SWITCH: + if (!check_instruction_writes(validated_shader, + &validation_state)) { + DRM_ERROR("Bad write at ip %d\n", ip); +@@ -809,6 +845,18 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + shader_end_ip = ip; + } + ++ if (sig == QPU_SIG_THREAD_SWITCH || ++ sig == QPU_SIG_LAST_THREAD_SWITCH) { ++ validated_shader->is_threaded = true; ++ ++ if (ip < last_thread_switch_ip + 3) { ++ DRM_ERROR("Thread switch too soon after " ++ "last switch at ip %d\n", ip); ++ goto fail; ++ } ++ last_thread_switch_ip = ip; ++ } ++ + break; + + case QPU_SIG_LOAD_IMM: +@@ -823,6 +871,13 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + if (!check_branch(inst, validated_shader, + &validation_state, ip)) + goto fail; ++ ++ if (ip < last_thread_switch_ip + 3) { ++ DRM_ERROR("Branch in thread switch at ip %d", ++ ip); ++ goto fail; ++ } ++ + break; + default: + DRM_ERROR("Unsupported QPU signal %d at " +@@ -844,6 +899,14 @@ vc4_validate_shader(struct drm_gem_cma_object *shader_obj) + goto fail; + } + ++ /* Might corrupt other thread */ ++ if (validated_shader->is_threaded && ++ validation_state.all_registers_used) { ++ DRM_ERROR("Shader uses threading, but uses the upper " ++ "half of the registers, too\n"); ++ goto fail; ++ } ++ + /* If we did a backwards branch and we haven't emitted a uniforms + * reset since then, we still need the uniforms stream to have the + * uniforms address available so that the backwards branch can do its +diff --git a/include/uapi/drm/vc4_drm.h b/include/uapi/drm/vc4_drm.h +index 69caa21f0cb2..f07a09016726 100644 +--- a/include/uapi/drm/vc4_drm.h ++++ b/include/uapi/drm/vc4_drm.h +@@ -287,6 +287,7 @@ struct drm_vc4_get_hang_state { + #define DRM_VC4_PARAM_V3D_IDENT2 2 + #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 + #define DRM_VC4_PARAM_SUPPORTS_ETC1 4 ++#define DRM_VC4_PARAM_SUPPORTS_THREADED_FS 5 + + struct drm_vc4_get_param { + __u32 param; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1165_0a9a2d88e32d1c142ba1ed626d70e9870545af96.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1165_0a9a2d88e32d1c142ba1ed626d70e9870545af96.patch --- linux-4.9.13/debian/patches/rpi/rpi_1165_0a9a2d88e32d1c142ba1ed626d70e9870545af96.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1165_0a9a2d88e32d1c142ba1ed626d70e9870545af96.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,94 @@ +commit 0a9a2d88e32d1c142ba1ed626d70e9870545af96 +Author: Derek Foreman +Date: Thu Nov 24 12:11:55 2016 -0600 + + drm/vc4: Fix race between page flip completion event and clean-up + + There was a small window where a userspace program could submit + a pageflip after receiving a pageflip completion event yet still + receive EBUSY. + + Signed-off-by: Derek Foreman + Signed-off-by: Eric Anholt + Reviewed-by: Eric Anholt + Reviewed-by: Daniel Stone + (cherry picked from commit 26fc78f6fef39b9d7a15def5e7e9826ff68303f4) + +diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c +index 13212788eef0..61d64c9c4b0c 100644 +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -682,6 +682,14 @@ void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id) + CRTC_WRITE(PV_INTEN, 0); + } + ++/* Must be called with the event lock held */ ++bool vc4_event_pending(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ return !!vc4_crtc->event; ++} ++ + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) + { + struct drm_crtc *crtc = &vc4_crtc->base; +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index e15eb37ca619..47fa29879096 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -445,6 +445,7 @@ int vc4_bo_stats_debugfs(struct seq_file *m, void *arg); + extern struct platform_driver vc4_crtc_driver; + int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id); + void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id); ++bool vc4_event_pending(struct drm_crtc *crtc); + int vc4_crtc_debugfs_regs(struct seq_file *m, void *arg); + int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id, + unsigned int flags, int *vpos, int *hpos, +diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c +index c1f65c6c8e60..67af2af70af0 100644 +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -119,17 +119,34 @@ static int vc4_atomic_commit(struct drm_device *dev, + + /* Make sure that any outstanding modesets have finished. */ + if (nonblock) { +- ret = down_trylock(&vc4->async_modeset); +- if (ret) { ++ struct drm_crtc *crtc; ++ struct drm_crtc_state *crtc_state; ++ unsigned long flags; ++ bool busy = false; ++ ++ /* ++ * If there's an undispatched event to send then we're ++ * obviously still busy. If there isn't, then we can ++ * unconditionally wait for the semaphore because it ++ * shouldn't be contended (for long). ++ * ++ * This is to prevent a race where queuing a new flip ++ * from userspace immediately on receipt of an event ++ * beats our clean-up and returns EBUSY. ++ */ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ for_each_crtc_in_state(state, crtc, crtc_state, i) ++ busy |= vc4_event_pending(crtc); ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ if (busy) { + kfree(c); + return -EBUSY; + } +- } else { +- ret = down_interruptible(&vc4->async_modeset); +- if (ret) { +- kfree(c); +- return ret; +- } ++ } ++ ret = down_interruptible(&vc4->async_modeset); ++ if (ret) { ++ kfree(c); ++ return ret; + } + + ret = drm_atomic_helper_prepare_planes(dev, state); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1166_4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1166_4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb.patch --- linux-4.9.13/debian/patches/rpi/rpi_1166_4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1166_4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,116 @@ +commit 4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb +Author: Boris Brezillon +Date: Fri Dec 2 14:48:07 2016 +0100 + + drm/vc4: Fix ->clock_select setting for the VEC encoder + + PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and + rework the vc4_set_crtc_possible_masks() to cover the full range of the + PV_CONTROL_CLK_SELECT field. + + Signed-off-by: Boris Brezillon + Signed-off-by: Eric Anholt + (cherry picked from commit ab8df60e3a3b68420d0d4477c5f07c00fbfb078b) + +diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c +index 61d64c9c4b0c..bdf32c572fc2 100644 +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -83,8 +83,7 @@ struct vc4_crtc_data { + /* Which channel of the HVS this pixelvalve sources from. */ + int hvs_channel; + +- enum vc4_encoder_type encoder0_type; +- enum vc4_encoder_type encoder1_type; ++ enum vc4_encoder_type encoder_types[4]; + }; + + #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset)) +@@ -880,20 +879,26 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { + + static const struct vc4_crtc_data pv0_data = { + .hvs_channel = 0, +- .encoder0_type = VC4_ENCODER_TYPE_DSI0, +- .encoder1_type = VC4_ENCODER_TYPE_DPI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0, ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_DPI, ++ }, + }; + + static const struct vc4_crtc_data pv1_data = { + .hvs_channel = 2, +- .encoder0_type = VC4_ENCODER_TYPE_DSI1, +- .encoder1_type = VC4_ENCODER_TYPE_SMI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1, ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_SMI, ++ }, + }; + + static const struct vc4_crtc_data pv2_data = { + .hvs_channel = 1, +- .encoder0_type = VC4_ENCODER_TYPE_VEC, +- .encoder1_type = VC4_ENCODER_TYPE_HDMI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI, ++ [PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC, ++ }, + }; + + static const struct of_device_id vc4_crtc_dt_match[] = { +@@ -907,17 +912,20 @@ static void vc4_set_crtc_possible_masks(struct drm_device *drm, + struct drm_crtc *crtc) + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ const struct vc4_crtc_data *crtc_data = vc4_crtc->data; ++ const enum vc4_encoder_type *encoder_types = crtc_data->encoder_types; + struct drm_encoder *encoder; + + drm_for_each_encoder(encoder, drm) { + struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); +- +- if (vc4_encoder->type == vc4_crtc->data->encoder0_type) { +- vc4_encoder->clock_select = 0; +- encoder->possible_crtcs |= drm_crtc_mask(crtc); +- } else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) { +- vc4_encoder->clock_select = 1; +- encoder->possible_crtcs |= drm_crtc_mask(crtc); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(crtc_data->encoder_types); i++) { ++ if (vc4_encoder->type == encoder_types[i]) { ++ vc4_encoder->clock_select = i; ++ encoder->possible_crtcs |= drm_crtc_mask(crtc); ++ break; ++ } + } + } + } +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index 47fa29879096..6d0688056aa2 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -197,6 +197,7 @@ to_vc4_plane(struct drm_plane *plane) + } + + enum vc4_encoder_type { ++ VC4_ENCODER_TYPE_NONE, + VC4_ENCODER_TYPE_HDMI, + VC4_ENCODER_TYPE_VEC, + VC4_ENCODER_TYPE_DSI0, +diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h +index 1aa44c2db556..39f6886b2410 100644 +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -177,8 +177,9 @@ + # define PV_CONTROL_WAIT_HSTART BIT(12) + # define PV_CONTROL_PIXEL_REP_MASK VC4_MASK(5, 4) + # define PV_CONTROL_PIXEL_REP_SHIFT 4 +-# define PV_CONTROL_CLK_SELECT_DSI_VEC 0 ++# define PV_CONTROL_CLK_SELECT_DSI 0 + # define PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI 1 ++# define PV_CONTROL_CLK_SELECT_VEC 2 + # define PV_CONTROL_CLK_SELECT_MASK VC4_MASK(3, 2) + # define PV_CONTROL_CLK_SELECT_SHIFT 2 + # define PV_CONTROL_FIFO_CLR BIT(1) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1167_79c185e1a74c7840efdf9d2897e6f0ebebeae4ca.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1167_79c185e1a74c7840efdf9d2897e6f0ebebeae4ca.patch --- linux-4.9.13/debian/patches/rpi/rpi_1167_79c185e1a74c7840efdf9d2897e6f0ebebeae4ca.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1167_79c185e1a74c7840efdf9d2897e6f0ebebeae4ca.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,149 @@ +commit 79c185e1a74c7840efdf9d2897e6f0ebebeae4ca +Author: Boris Brezillon +Date: Fri Dec 2 14:48:09 2016 +0100 + + drm: Add TV connector states to drm_connector_state + + Some generic TV connector properties are exposed in drm_mode_config, but + they are currently handled independently in each DRM encoder driver. + + Extend the drm_connector_state to store TV related states, and modify the + drm_atomic_connector_{set,get}_property() helpers to fill the connector + state accordingly. + + Each driver is then responsible for checking and applying the new config + in its ->atomic_mode_{check,set}() operations. + + Signed-off-by: Boris Brezillon + Reviewed-by: Daniel Vetter + Signed-off-by: Eric Anholt + (cherry picked from commit 299a16b163c95fbe1e3b1e142ba9c6ce9dab2c23) + +diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c +index 4e19bde4bbff..846da4f64164 100644 +--- a/drivers/gpu/drm/drm_atomic.c ++++ b/drivers/gpu/drm/drm_atomic.c +@@ -989,12 +989,38 @@ int drm_atomic_connector_set_property(struct drm_connector *connector, + * now?) atomic writes to DPMS property: + */ + return -EINVAL; ++ } else if (property == config->tv_select_subconnector_property) { ++ state->tv.subconnector = val; ++ } else if (property == config->tv_left_margin_property) { ++ state->tv.margins.left = val; ++ } else if (property == config->tv_right_margin_property) { ++ state->tv.margins.right = val; ++ } else if (property == config->tv_top_margin_property) { ++ state->tv.margins.top = val; ++ } else if (property == config->tv_bottom_margin_property) { ++ state->tv.margins.bottom = val; ++ } else if (property == config->tv_mode_property) { ++ state->tv.mode = val; ++ } else if (property == config->tv_brightness_property) { ++ state->tv.brightness = val; ++ } else if (property == config->tv_contrast_property) { ++ state->tv.contrast = val; ++ } else if (property == config->tv_flicker_reduction_property) { ++ state->tv.flicker_reduction = val; ++ } else if (property == config->tv_overscan_property) { ++ state->tv.overscan = val; ++ } else if (property == config->tv_saturation_property) { ++ state->tv.saturation = val; ++ } else if (property == config->tv_hue_property) { ++ state->tv.hue = val; + } else if (connector->funcs->atomic_set_property) { + return connector->funcs->atomic_set_property(connector, + state, property, val); + } else { + return -EINVAL; + } ++ ++ return 0; + } + EXPORT_SYMBOL(drm_atomic_connector_set_property); + +@@ -1025,6 +1051,30 @@ drm_atomic_connector_get_property(struct drm_connector *connector, + *val = (state->crtc) ? state->crtc->base.id : 0; + } else if (property == config->dpms_property) { + *val = connector->dpms; ++ } else if (property == config->tv_select_subconnector_property) { ++ *val = state->tv.subconnector; ++ } else if (property == config->tv_left_margin_property) { ++ *val = state->tv.margins.left; ++ } else if (property == config->tv_right_margin_property) { ++ *val = state->tv.margins.right; ++ } else if (property == config->tv_top_margin_property) { ++ *val = state->tv.margins.top; ++ } else if (property == config->tv_bottom_margin_property) { ++ *val = state->tv.margins.bottom; ++ } else if (property == config->tv_mode_property) { ++ *val = state->tv.mode; ++ } else if (property == config->tv_brightness_property) { ++ *val = state->tv.brightness; ++ } else if (property == config->tv_contrast_property) { ++ *val = state->tv.contrast; ++ } else if (property == config->tv_flicker_reduction_property) { ++ *val = state->tv.flicker_reduction; ++ } else if (property == config->tv_overscan_property) { ++ *val = state->tv.overscan; ++ } else if (property == config->tv_saturation_property) { ++ *val = state->tv.saturation; ++ } else if (property == config->tv_hue_property) { ++ *val = state->tv.hue; + } else if (connector->funcs->atomic_get_property) { + return connector->funcs->atomic_get_property(connector, + state, property, val); +diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h +index ac9d7d8e0e43..2645e8038572 100644 +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -194,10 +194,40 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info, + unsigned int num_formats); + + /** ++ * struct drm_tv_connector_state - TV connector related states ++ * @subconnector: selected subconnector ++ * @margins: left/right/top/bottom margins ++ * @mode: TV mode ++ * @brightness: brightness in percent ++ * @contrast: contrast in percent ++ * @flicker_reduction: flicker reduction in percent ++ * @overscan: overscan in percent ++ * @saturation: saturation in percent ++ * @hue: hue in percent ++ */ ++struct drm_tv_connector_state { ++ enum drm_mode_subconnector subconnector; ++ struct { ++ unsigned int left; ++ unsigned int right; ++ unsigned int top; ++ unsigned int bottom; ++ } margins; ++ unsigned int mode; ++ unsigned int brightness; ++ unsigned int contrast; ++ unsigned int flicker_reduction; ++ unsigned int overscan; ++ unsigned int saturation; ++ unsigned int hue; ++}; ++ ++/** + * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector + * @best_encoder: can be used by helpers and drivers to select the encoder + * @state: backpointer to global drm_atomic_state ++ * @tv: TV connector state + */ + struct drm_connector_state { + struct drm_connector *connector; +@@ -213,6 +243,8 @@ struct drm_connector_state { + struct drm_encoder *best_encoder; + + struct drm_atomic_state *state; ++ ++ struct drm_tv_connector_state tv; + }; + + /** diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1168_4073b634ed17e4f9ac61a047e3ae5bf7e51bee18.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1168_4073b634ed17e4f9ac61a047e3ae5bf7e51bee18.patch --- linux-4.9.13/debian/patches/rpi/rpi_1168_4073b634ed17e4f9ac61a047e3ae5bf7e51bee18.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1168_4073b634ed17e4f9ac61a047e3ae5bf7e51bee18.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,46 @@ +commit 4073b634ed17e4f9ac61a047e3ae5bf7e51bee18 +Author: Boris Brezillon +Date: Fri Dec 2 14:48:08 2016 +0100 + + drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum + + List of values like the DRM_MODE_SUBCONNECTOR_xx ones are better + represented with enums. + + Turn the DRM_MODE_SUBCONNECTOR_xx macros into an enum. + + Signed-off-by: Boris Brezillon + Suggested-by: Daniel Vetter + Reviewed-by: Daniel Vetter + Signed-off-by: Eric Anholt + (cherry picked from commit dee7a4fee730ca8908f335b6b66174cba4598ecd) + +diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h +index df0e3504c349..970bfc0d7107 100644 +--- a/include/uapi/drm/drm_mode.h ++++ b/include/uapi/drm/drm_mode.h +@@ -220,14 +220,16 @@ struct drm_mode_get_encoder { + + /* This is for connectors with multiple signal types. */ + /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ +-#define DRM_MODE_SUBCONNECTOR_Automatic 0 +-#define DRM_MODE_SUBCONNECTOR_Unknown 0 +-#define DRM_MODE_SUBCONNECTOR_DVID 3 +-#define DRM_MODE_SUBCONNECTOR_DVIA 4 +-#define DRM_MODE_SUBCONNECTOR_Composite 5 +-#define DRM_MODE_SUBCONNECTOR_SVIDEO 6 +-#define DRM_MODE_SUBCONNECTOR_Component 8 +-#define DRM_MODE_SUBCONNECTOR_SCART 9 ++enum drm_mode_subconnector { ++ DRM_MODE_SUBCONNECTOR_Automatic = 0, ++ DRM_MODE_SUBCONNECTOR_Unknown = 0, ++ DRM_MODE_SUBCONNECTOR_DVID = 3, ++ DRM_MODE_SUBCONNECTOR_DVIA = 4, ++ DRM_MODE_SUBCONNECTOR_Composite = 5, ++ DRM_MODE_SUBCONNECTOR_SVIDEO = 6, ++ DRM_MODE_SUBCONNECTOR_Component = 8, ++ DRM_MODE_SUBCONNECTOR_SCART = 9, ++}; + + #define DRM_MODE_CONNECTOR_Unknown 0 + #define DRM_MODE_CONNECTOR_VGA 1 diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1169_a5abc8d4ad9cb505862d551ed83d68180477c311.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1169_a5abc8d4ad9cb505862d551ed83d68180477c311.patch --- linux-4.9.13/debian/patches/rpi/rpi_1169_a5abc8d4ad9cb505862d551ed83d68180477c311.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1169_a5abc8d4ad9cb505862d551ed83d68180477c311.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,734 @@ +commit a5abc8d4ad9cb505862d551ed83d68180477c311 +Author: Boris Brezillon +Date: Fri Dec 2 14:48:10 2016 +0100 + + drm/vc4: Add support for the VEC (Video Encoder) IP + + The VEC IP is a TV DAC, providing support for PAL and NTSC standards. + + Signed-off-by: Boris Brezillon + Signed-off-by: Eric Anholt + (cherry picked from commit e4b81f8c74c82dbc0cb0e5ceb5ef9b713b325fc9) + +diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile +index c6dd06cca983..3358ec8775cf 100644 +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -12,6 +12,7 @@ vc4-y := \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ ++ vc4_vec.o \ + vc4_hvs.o \ + vc4_irq.o \ + vc4_plane.o \ +diff --git a/drivers/gpu/drm/vc4/vc4_debugfs.c b/drivers/gpu/drm/vc4/vc4_debugfs.c +index 245115d49c46..caf817bac885 100644 +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -19,6 +19,7 @@ static const struct drm_info_list vc4_debugfs_list[] = { + {"bo_stats", vc4_bo_stats_debugfs, 0}, + {"dpi_regs", vc4_dpi_debugfs_regs, 0}, + {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, ++ {"vec_regs", vc4_vec_debugfs_regs, 0}, + {"hvs_regs", vc4_hvs_debugfs_regs, 0}, + {"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0}, + {"crtc1_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)1}, +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 3abaa0f85da1..281609353063 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -294,6 +294,7 @@ static const struct component_master_ops vc4_drm_ops = { + + static struct platform_driver *const component_drivers[] = { + &vc4_hdmi_driver, ++ &vc4_vec_driver, + &vc4_dpi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index 6d0688056aa2..61a9b3e81823 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -20,6 +20,7 @@ struct vc4_dev { + struct vc4_crtc *crtc[3]; + struct vc4_v3d *v3d; + struct vc4_dpi *dpi; ++ struct vc4_vec *vec; + + struct drm_fbdev_cma *fbdev; + +@@ -494,6 +495,10 @@ int vc4_queue_seqno_cb(struct drm_device *dev, + extern struct platform_driver vc4_hdmi_driver; + int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_hdmi.c */ ++extern struct platform_driver vc4_vec_driver; ++int vc4_vec_debugfs_regs(struct seq_file *m, void *unused); ++ + /* vc4_irq.c */ + irqreturn_t vc4_irq(int irq, void *arg); + void vc4_irq_preinstall(struct drm_device *dev); +diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c +new file mode 100644 +index 000000000000..32bb8ef985fb +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -0,0 +1,657 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++/** ++ * DOC: VC4 SDTV module ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++ ++/* WSE Registers */ ++#define VEC_WSE_RESET 0xc0 ++ ++#define VEC_WSE_CONTROL 0xc4 ++#define VEC_WSE_WSS_ENABLE BIT(7) ++ ++#define VEC_WSE_WSS_DATA 0xc8 ++#define VEC_WSE_VPS_DATA1 0xcc ++#define VEC_WSE_VPS_CONTROL 0xd0 ++ ++/* VEC Registers */ ++#define VEC_REVID 0x100 ++ ++#define VEC_CONFIG0 0x104 ++#define VEC_CONFIG0_YDEL_MASK GENMASK(28, 26) ++#define VEC_CONFIG0_YDEL(x) ((x) << 26) ++#define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24) ++#define VEC_CONFIG0_CDEL(x) ((x) << 24) ++#define VEC_CONFIG0_PBPR_FIL BIT(18) ++#define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16) ++#define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_32 (1 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_16 (2 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_8 (3 << 16) ++#define VEC_CONFIG0_CBURST_GAIN_MASK GENMASK(14, 13) ++#define VEC_CONFIG0_CBURST_GAIN_UNITY (0 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_128 (1 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_64 (2 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_32 (3 << 13) ++#define VEC_CONFIG0_CHRBW1 BIT(11) ++#define VEC_CONFIG0_CHRBW0 BIT(10) ++#define VEC_CONFIG0_SYNCDIS BIT(9) ++#define VEC_CONFIG0_BURDIS BIT(8) ++#define VEC_CONFIG0_CHRDIS BIT(7) ++#define VEC_CONFIG0_PDEN BIT(6) ++#define VEC_CONFIG0_YCDELAY BIT(4) ++#define VEC_CONFIG0_RAMPEN BIT(2) ++#define VEC_CONFIG0_YCDIS BIT(2) ++#define VEC_CONFIG0_STD_MASK GENMASK(1, 0) ++#define VEC_CONFIG0_NTSC_STD 0 ++#define VEC_CONFIG0_PAL_BDGHI_STD 1 ++#define VEC_CONFIG0_PAL_N_STD 3 ++ ++#define VEC_SCHPH 0x108 ++#define VEC_SOFT_RESET 0x10c ++#define VEC_CLMP0_START 0x144 ++#define VEC_CLMP0_END 0x148 ++#define VEC_FREQ3_2 0x180 ++#define VEC_FREQ1_0 0x184 ++ ++#define VEC_CONFIG1 0x188 ++#define VEC_CONFIG_VEC_RESYNC_OFF BIT(18) ++#define VEC_CONFIG_RGB219 BIT(17) ++#define VEC_CONFIG_CBAR_EN BIT(16) ++#define VEC_CONFIG_TC_OBB BIT(15) ++#define VEC_CONFIG1_OUTPUT_MODE_MASK GENMASK(12, 10) ++#define VEC_CONFIG1_C_Y_CVBS (0 << 10) ++#define VEC_CONFIG1_CVBS_Y_C (1 << 10) ++#define VEC_CONFIG1_PR_Y_PB (2 << 10) ++#define VEC_CONFIG1_RGB (4 << 10) ++#define VEC_CONFIG1_Y_C_CVBS (5 << 10) ++#define VEC_CONFIG1_C_CVBS_Y (6 << 10) ++#define VEC_CONFIG1_C_CVBS_CVBS (7 << 10) ++#define VEC_CONFIG1_DIS_CHR BIT(9) ++#define VEC_CONFIG1_DIS_LUMA BIT(8) ++#define VEC_CONFIG1_YCBCR_IN BIT(6) ++#define VEC_CONFIG1_DITHER_TYPE_LFSR 0 ++#define VEC_CONFIG1_DITHER_TYPE_COUNTER BIT(5) ++#define VEC_CONFIG1_DITHER_EN BIT(4) ++#define VEC_CONFIG1_CYDELAY BIT(3) ++#define VEC_CONFIG1_LUMADIS BIT(2) ++#define VEC_CONFIG1_COMPDIS BIT(1) ++#define VEC_CONFIG1_CUSTOM_FREQ BIT(0) ++ ++#define VEC_CONFIG2 0x18c ++#define VEC_CONFIG2_PROG_SCAN BIT(15) ++#define VEC_CONFIG2_SYNC_ADJ_MASK GENMASK(14, 12) ++#define VEC_CONFIG2_SYNC_ADJ(x) (((x) / 2) << 12) ++#define VEC_CONFIG2_PBPR_EN BIT(10) ++#define VEC_CONFIG2_UV_DIG_DIS BIT(6) ++#define VEC_CONFIG2_RGB_DIG_DIS BIT(5) ++#define VEC_CONFIG2_TMUX_MASK GENMASK(3, 2) ++#define VEC_CONFIG2_TMUX_DRIVE0 (0 << 2) ++#define VEC_CONFIG2_TMUX_RG_COMP (1 << 2) ++#define VEC_CONFIG2_TMUX_UV_YC (2 << 2) ++#define VEC_CONFIG2_TMUX_SYNC_YC (3 << 2) ++ ++#define VEC_INTERRUPT_CONTROL 0x190 ++#define VEC_INTERRUPT_STATUS 0x194 ++#define VEC_FCW_SECAM_B 0x198 ++#define VEC_SECAM_GAIN_VAL 0x19c ++ ++#define VEC_CONFIG3 0x1a0 ++#define VEC_CONFIG3_HORIZ_LEN_STD (0 << 0) ++#define VEC_CONFIG3_HORIZ_LEN_MPEG1_SIF (1 << 0) ++#define VEC_CONFIG3_SHAPE_NON_LINEAR BIT(1) ++ ++#define VEC_STATUS0 0x200 ++#define VEC_MASK0 0x204 ++ ++#define VEC_CFG 0x208 ++#define VEC_CFG_SG_MODE_MASK GENMASK(6, 5) ++#define VEC_CFG_SG_MODE(x) ((x) << 5) ++#define VEC_CFG_SG_EN BIT(4) ++#define VEC_CFG_VEC_EN BIT(3) ++#define VEC_CFG_MB_EN BIT(2) ++#define VEC_CFG_ENABLE BIT(1) ++#define VEC_CFG_TB_EN BIT(0) ++ ++#define VEC_DAC_TEST 0x20c ++ ++#define VEC_DAC_CONFIG 0x210 ++#define VEC_DAC_CONFIG_LDO_BIAS_CTRL(x) ((x) << 24) ++#define VEC_DAC_CONFIG_DRIVER_CTRL(x) ((x) << 16) ++#define VEC_DAC_CONFIG_DAC_CTRL(x) (x) ++ ++#define VEC_DAC_MISC 0x214 ++#define VEC_DAC_MISC_VCD_CTRL_MASK GENMASK(31, 16) ++#define VEC_DAC_MISC_VCD_CTRL(x) ((x) << 16) ++#define VEC_DAC_MISC_VID_ACT BIT(8) ++#define VEC_DAC_MISC_VCD_PWRDN BIT(6) ++#define VEC_DAC_MISC_BIAS_PWRDN BIT(5) ++#define VEC_DAC_MISC_DAC_PWRDN BIT(2) ++#define VEC_DAC_MISC_LDO_PWRDN BIT(1) ++#define VEC_DAC_MISC_DAC_RST_N BIT(0) ++ ++ ++/* General VEC hardware state. */ ++struct vc4_vec { ++ struct platform_device *pdev; ++ ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ ++ void __iomem *regs; ++ ++ struct clk *clock; ++ ++ const struct vc4_vec_tv_mode *tv_mode; ++}; ++ ++#define VEC_READ(offset) readl(vec->regs + (offset)) ++#define VEC_WRITE(offset, val) writel(val, vec->regs + (offset)) ++ ++/* VC4 VEC encoder KMS struct */ ++struct vc4_vec_encoder { ++ struct vc4_encoder base; ++ struct vc4_vec *vec; ++}; ++ ++static inline struct vc4_vec_encoder * ++to_vc4_vec_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_vec_encoder, base.base); ++} ++ ++/* VC4 VEC connector KMS struct */ ++struct vc4_vec_connector { ++ struct drm_connector base; ++ struct vc4_vec *vec; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++}; ++ ++static inline struct vc4_vec_connector * ++to_vc4_vec_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_vec_connector, base); ++} ++ ++enum vc4_vec_tv_mode_id { ++ VC4_VEC_TV_MODE_NTSC, ++ VC4_VEC_TV_MODE_NTSC_J, ++ VC4_VEC_TV_MODE_PAL, ++ VC4_VEC_TV_MODE_PAL_M, ++}; ++ ++struct vc4_vec_tv_mode { ++ const struct drm_display_mode *mode; ++ void (*mode_set)(struct vc4_vec *vec); ++}; ++ ++#define VEC_REG(reg) { reg, #reg } ++static const struct { ++ u32 reg; ++ const char *name; ++} vec_regs[] = { ++ VEC_REG(VEC_WSE_CONTROL), ++ VEC_REG(VEC_WSE_WSS_DATA), ++ VEC_REG(VEC_WSE_VPS_DATA1), ++ VEC_REG(VEC_WSE_VPS_CONTROL), ++ VEC_REG(VEC_REVID), ++ VEC_REG(VEC_CONFIG0), ++ VEC_REG(VEC_SCHPH), ++ VEC_REG(VEC_CLMP0_START), ++ VEC_REG(VEC_CLMP0_END), ++ VEC_REG(VEC_FREQ3_2), ++ VEC_REG(VEC_FREQ1_0), ++ VEC_REG(VEC_CONFIG1), ++ VEC_REG(VEC_CONFIG2), ++ VEC_REG(VEC_INTERRUPT_CONTROL), ++ VEC_REG(VEC_INTERRUPT_STATUS), ++ VEC_REG(VEC_FCW_SECAM_B), ++ VEC_REG(VEC_SECAM_GAIN_VAL), ++ VEC_REG(VEC_CONFIG3), ++ VEC_REG(VEC_STATUS0), ++ VEC_REG(VEC_MASK0), ++ VEC_REG(VEC_CFG), ++ VEC_REG(VEC_DAC_TEST), ++ VEC_REG(VEC_DAC_CONFIG), ++ VEC_REG(VEC_DAC_MISC), ++}; ++ ++#ifdef CONFIG_DEBUG_FS ++int vc4_vec_debugfs_regs(struct seq_file *m, void *unused) ++{ ++ struct drm_info_node *node = (struct drm_info_node *)m->private; ++ struct drm_device *dev = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_vec *vec = vc4->vec; ++ int i; ++ ++ if (!vec) ++ return 0; ++ ++ for (i = 0; i < ARRAY_SIZE(vec_regs); i++) { ++ seq_printf(m, "%s (0x%04x): 0x%08x\n", ++ vec_regs[i].name, vec_regs[i].reg, ++ VEC_READ(vec_regs[i].reg)); ++ } ++ ++ return 0; ++} ++#endif ++ ++static void vc4_vec_ntsc_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static const struct drm_display_mode ntsc_mode = { ++ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, ++ 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0, ++ DRM_MODE_FLAG_INTERLACE) ++}; ++ ++static void vc4_vec_pal_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); ++ VEC_WRITE(VEC_CONFIG1, ++ VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ); ++ VEC_WRITE(VEC_FREQ3_2, 0x223b); ++ VEC_WRITE(VEC_FREQ1_0, 0x61d1); ++} ++ ++static const struct drm_display_mode pal_mode = { ++ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, ++ 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0, ++ DRM_MODE_FLAG_INTERLACE) ++}; ++ ++static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { ++ [VC4_VEC_TV_MODE_NTSC] = { ++ .mode = &ntsc_mode, ++ .mode_set = vc4_vec_ntsc_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_NTSC_J] = { ++ .mode = &ntsc_mode, ++ .mode_set = vc4_vec_ntsc_j_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_PAL] = { ++ .mode = &pal_mode, ++ .mode_set = vc4_vec_pal_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_PAL_M] = { ++ .mode = &pal_mode, ++ .mode_set = vc4_vec_pal_m_mode_set, ++ }, ++}; ++ ++static enum drm_connector_status ++vc4_vec_connector_detect(struct drm_connector *connector, bool force) ++{ ++ return connector_status_unknown; ++} ++ ++static void vc4_vec_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static int vc4_vec_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_connector_state *state = connector->state; ++ struct drm_display_mode *mode; ++ ++ mode = drm_mode_duplicate(connector->dev, ++ vc4_vec_tv_modes[state->tv.mode].mode); ++ if (!mode) { ++ DRM_ERROR("Failed to create a new display mode\n"); ++ return -ENOMEM; ++ } ++ ++ drm_mode_probed_add(connector, mode); ++ ++ return 1; ++} ++ ++static const struct drm_connector_funcs vc4_vec_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_vec_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .set_property = drm_atomic_helper_connector_set_property, ++ .destroy = vc4_vec_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = { ++ .get_modes = vc4_vec_connector_get_modes, ++}; ++ ++static struct drm_connector *vc4_vec_connector_init(struct drm_device *dev, ++ struct vc4_vec *vec) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_vec_connector *vec_connector; ++ ++ vec_connector = devm_kzalloc(dev->dev, sizeof(*vec_connector), ++ GFP_KERNEL); ++ if (!vec_connector) ++ return ERR_PTR(-ENOMEM); ++ ++ connector = &vec_connector->base; ++ connector->interlace_allowed = true; ++ ++ vec_connector->encoder = vec->encoder; ++ vec_connector->vec = vec; ++ ++ drm_connector_init(dev, connector, &vc4_vec_connector_funcs, ++ DRM_MODE_CONNECTOR_Composite); ++ drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs); ++ ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_mode_property, ++ VC4_VEC_TV_MODE_NTSC); ++ vec->tv_mode = &vc4_vec_tv_modes[VC4_VEC_TV_MODE_NTSC]; ++ ++ drm_mode_connector_attach_encoder(connector, vec->encoder); ++ ++ return connector; ++} ++ ++static const struct drm_encoder_funcs vc4_vec_encoder_funcs = { ++ .destroy = drm_encoder_cleanup, ++}; ++ ++static void vc4_vec_encoder_disable(struct drm_encoder *encoder) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ int ret; ++ ++ VEC_WRITE(VEC_CFG, 0); ++ VEC_WRITE(VEC_DAC_MISC, ++ VEC_DAC_MISC_VCD_PWRDN | ++ VEC_DAC_MISC_BIAS_PWRDN | ++ VEC_DAC_MISC_DAC_PWRDN | ++ VEC_DAC_MISC_LDO_PWRDN); ++ ++ clk_disable_unprepare(vec->clock); ++ ++ ret = pm_runtime_put(&vec->pdev->dev); ++ if (ret < 0) { ++ DRM_ERROR("Failed to release power domain: %d\n", ret); ++ return; ++ } ++} ++ ++static void vc4_vec_encoder_enable(struct drm_encoder *encoder) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ int ret; ++ ++ ret = pm_runtime_get_sync(&vec->pdev->dev); ++ if (ret < 0) { ++ DRM_ERROR("Failed to retain power domain: %d\n", ret); ++ return; ++ } ++ ++ /* ++ * We need to set the clock rate each time we enable the encoder ++ * because there's a chance we share the same parent with the HDMI ++ * clock, and both drivers are requesting different rates. ++ * The good news is, these 2 encoders cannot be enabled at the same ++ * time, thus preventing incompatible rate requests. ++ */ ++ ret = clk_set_rate(vec->clock, 108000000); ++ if (ret) { ++ DRM_ERROR("Failed to set clock rate: %d\n", ret); ++ return; ++ } ++ ++ ret = clk_prepare_enable(vec->clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on core clock: %d\n", ret); ++ return; ++ } ++ ++ /* Reset the different blocks */ ++ VEC_WRITE(VEC_WSE_RESET, 1); ++ VEC_WRITE(VEC_SOFT_RESET, 1); ++ ++ /* Disable the CGSM-A and WSE blocks */ ++ VEC_WRITE(VEC_WSE_CONTROL, 0); ++ ++ /* Write config common to all modes. */ ++ ++ /* ++ * Color subcarrier phase: phase = 360 * SCHPH / 256. ++ * 0x28 <=> 39.375 deg. ++ */ ++ VEC_WRITE(VEC_SCHPH, 0x28); ++ ++ /* ++ * Reset to default values. ++ */ ++ VEC_WRITE(VEC_CLMP0_START, 0xac); ++ VEC_WRITE(VEC_CLMP0_END, 0xec); ++ VEC_WRITE(VEC_CONFIG2, ++ VEC_CONFIG2_UV_DIG_DIS | VEC_CONFIG2_RGB_DIG_DIS); ++ VEC_WRITE(VEC_CONFIG3, VEC_CONFIG3_HORIZ_LEN_STD); ++ VEC_WRITE(VEC_DAC_CONFIG, ++ VEC_DAC_CONFIG_DAC_CTRL(0xc) | ++ VEC_DAC_CONFIG_DRIVER_CTRL(0xc) | ++ VEC_DAC_CONFIG_LDO_BIAS_CTRL(0x46)); ++ ++ /* Mask all interrupts. */ ++ VEC_WRITE(VEC_MASK0, 0); ++ ++ vec->tv_mode->mode_set(vec); ++ ++ VEC_WRITE(VEC_DAC_MISC, ++ VEC_DAC_MISC_VID_ACT | VEC_DAC_MISC_DAC_RST_N); ++ VEC_WRITE(VEC_CFG, VEC_CFG_VEC_EN); ++} ++ ++ ++static bool vc4_vec_encoder_mode_fixup(struct drm_encoder *encoder, ++ const struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) ++{ ++ return true; ++} ++ ++static void vc4_vec_encoder_atomic_mode_set(struct drm_encoder *encoder, ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ ++ vec->tv_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; ++} ++ ++static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder, ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) ++{ ++ const struct vc4_vec_tv_mode *vec_mode; ++ ++ vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; ++ ++ if (conn_state->crtc && ++ !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = { ++ .disable = vc4_vec_encoder_disable, ++ .enable = vc4_vec_encoder_enable, ++ .mode_fixup = vc4_vec_encoder_mode_fixup, ++ .atomic_check = vc4_vec_encoder_atomic_check, ++ .atomic_mode_set = vc4_vec_encoder_atomic_mode_set, ++}; ++ ++static const struct of_device_id vc4_vec_dt_match[] = { ++ { .compatible = "brcm,bcm2835-vec", .data = NULL }, ++ { /* sentinel */ }, ++}; ++ ++static const char * const tv_mode_names[] = { ++ [VC4_VEC_TV_MODE_NTSC] = "NTSC", ++ [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", ++ [VC4_VEC_TV_MODE_PAL] = "PAL", ++ [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", ++}; ++ ++static int vc4_vec_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_vec *vec; ++ struct vc4_vec_encoder *vc4_vec_encoder; ++ int ret; ++ ++ ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names), ++ tv_mode_names); ++ if (ret) ++ return ret; ++ ++ vec = devm_kzalloc(dev, sizeof(*vec), GFP_KERNEL); ++ if (!vec) ++ return -ENOMEM; ++ ++ vc4_vec_encoder = devm_kzalloc(dev, sizeof(*vc4_vec_encoder), ++ GFP_KERNEL); ++ if (!vc4_vec_encoder) ++ return -ENOMEM; ++ vc4_vec_encoder->base.type = VC4_ENCODER_TYPE_VEC; ++ vc4_vec_encoder->vec = vec; ++ vec->encoder = &vc4_vec_encoder->base.base; ++ ++ vec->pdev = pdev; ++ vec->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(vec->regs)) ++ return PTR_ERR(vec->regs); ++ ++ vec->clock = devm_clk_get(dev, NULL); ++ if (IS_ERR(vec->clock)) { ++ ret = PTR_ERR(vec->clock); ++ if (ret != -EPROBE_DEFER) ++ DRM_ERROR("Failed to get clock: %d\n", ret); ++ return ret; ++ } ++ ++ pm_runtime_enable(dev); ++ ++ drm_encoder_init(drm, vec->encoder, &vc4_vec_encoder_funcs, ++ DRM_MODE_ENCODER_TVDAC, NULL); ++ drm_encoder_helper_add(vec->encoder, &vc4_vec_encoder_helper_funcs); ++ ++ vec->connector = vc4_vec_connector_init(drm, vec); ++ if (IS_ERR(vec->connector)) { ++ ret = PTR_ERR(vec->connector); ++ goto err_destroy_encoder; ++ } ++ ++ dev_set_drvdata(dev, vec); ++ ++ vc4->vec = vec; ++ ++ return 0; ++ ++err_destroy_encoder: ++ drm_encoder_cleanup(vec->encoder); ++ pm_runtime_disable(dev); ++ ++ return ret; ++} ++ ++static void vc4_vec_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_vec *vec = dev_get_drvdata(dev); ++ ++ vc4_vec_connector_destroy(vec->connector); ++ drm_encoder_cleanup(vec->encoder); ++ pm_runtime_disable(dev); ++ ++ vc4->vec = NULL; ++} ++ ++static const struct component_ops vc4_vec_ops = { ++ .bind = vc4_vec_bind, ++ .unbind = vc4_vec_unbind, ++}; ++ ++static int vc4_vec_dev_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_vec_ops); ++} ++ ++static int vc4_vec_dev_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_vec_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_vec_driver = { ++ .probe = vc4_vec_dev_probe, ++ .remove = vc4_vec_dev_remove, ++ .driver = { ++ .name = "vc4_vec", ++ .of_match_table = vc4_vec_dt_match, ++ }, ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1170_db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1170_db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4.patch --- linux-4.9.13/debian/patches/rpi/rpi_1170_db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1170_db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,59 @@ +commit db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4 +Author: Eric Anholt +Date: Thu Sep 15 15:25:23 2016 +0100 + + drm/vc4: Set up SCALER_DISPCTRL at boot. + + We want the HVS on, obviously, and we also want DSP3 (PV1's source) to + be muxed from HVS channel 2 like we expect in vc4_crtc.c. The + firmware wasn't setting the DSP3 mux up when both the LCD and HDMI + were disabled. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c +index 6fbab1c82cb1..fc68b1b4da52 100644 +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -170,6 +170,7 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) + struct vc4_dev *vc4 = drm->dev_private; + struct vc4_hvs *hvs = NULL; + int ret; ++ u32 dispctrl; + + hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL); + if (!hvs) +@@ -211,6 +212,19 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) + return ret; + + vc4->hvs = hvs; ++ ++ dispctrl = HVS_READ(SCALER_DISPCTRL); ++ ++ dispctrl |= SCALER_DISPCTRL_ENABLE; ++ ++ /* Set DSP3 (PV1) to use HVS channel 2, which would otherwise ++ * be unused. ++ */ ++ dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK; ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX); ++ ++ HVS_WRITE(SCALER_DISPCTRL, dispctrl); ++ + return 0; + } + +diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h +index 39f6886b2410..b3b297fba709 100644 +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -244,6 +244,9 @@ + # define SCALER_DISPCTRL_ENABLE BIT(31) + # define SCALER_DISPCTRL_DSP2EISLUR BIT(15) + # define SCALER_DISPCTRL_DSP1EISLUR BIT(14) ++# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18) ++# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18 ++ + /* Enables Display 0 short line and underrun contribution to + * SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are + * always enabled. diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1171_62e93f080e33428055e2cb895db0856c748ed8d5.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1171_62e93f080e33428055e2cb895db0856c748ed8d5.patch --- linux-4.9.13/debian/patches/rpi/rpi_1171_62e93f080e33428055e2cb895db0856c748ed8d5.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1171_62e93f080e33428055e2cb895db0856c748ed8d5.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,113 @@ +commit 62e93f080e33428055e2cb895db0856c748ed8d5 +Author: Eric Anholt +Date: Wed Feb 10 16:17:29 2016 -0800 + + drm/vc4: Add support for feeding DSI encoders from the pixel valve. + + We have to set a different pixel format, which tells the hardware to + use the pix_width field that's fed in sideband from the DSI encoder to + divide the "pixel" clock. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c +index bdf32c572fc2..0a8611587405 100644 +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -352,38 +352,40 @@ static u32 vc4_get_fifo_full_level(u32 format) + } + + /* +- * Returns the clock select bit for the connector attached to the +- * CRTC. ++ * Returns the encoder attached to the CRTC. ++ * ++ * VC4 can only scan out to one encoder at a time, while the DRM core ++ * allows drivers to push pixels to more than one encoder from the ++ * same CRTC. + */ +-static int vc4_get_clock_select(struct drm_crtc *crtc) ++static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc) + { + struct drm_connector *connector; + + drm_for_each_connector(connector, crtc->dev) { + if (connector->state->crtc == crtc) { +- struct drm_encoder *encoder = connector->encoder; +- struct vc4_encoder *vc4_encoder = +- to_vc4_encoder(encoder); +- +- return vc4_encoder->clock_select; ++ return connector->encoder; + } + } + +- return -1; ++ return NULL; + } + + static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) + { + struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc); ++ struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + struct drm_crtc_state *state = crtc->state; + struct drm_display_mode *mode = &state->adjusted_mode; + bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE; + u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1; +- u32 format = PV_CONTROL_FORMAT_24; ++ bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || ++ vc4_encoder->type == VC4_ENCODER_TYPE_DSI1); ++ u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; + bool debug_dump_regs = false; +- int clock_select = vc4_get_clock_select(crtc); + + if (debug_dump_regs) { + DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc)); +@@ -439,17 +441,19 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) + */ + CRTC_WRITE(PV_V_CONTROL, + PV_VCONTROL_CONTINUOUS | ++ (is_dsi ? PV_VCONTROL_DSI : 0) | + PV_VCONTROL_INTERLACE | + VC4_SET_FIELD(mode->htotal * pixel_rep / 2, + PV_VCONTROL_ODD_DELAY)); + CRTC_WRITE(PV_VSYNCD_EVEN, 0); + } else { +- CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS); ++ CRTC_WRITE(PV_V_CONTROL, ++ PV_VCONTROL_CONTINUOUS | ++ (is_dsi ? PV_VCONTROL_DSI : 0)); + } + + CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep); + +- + CRTC_WRITE(PV_CONTROL, + VC4_SET_FIELD(format, PV_CONTROL_FORMAT) | + VC4_SET_FIELD(vc4_get_fifo_full_level(format), +@@ -458,7 +462,8 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) + PV_CONTROL_CLR_AT_START | + PV_CONTROL_TRIGGER_UNDERFLOW | + PV_CONTROL_WAIT_HSTART | +- VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) | ++ VC4_SET_FIELD(vc4_encoder->clock_select, ++ PV_CONTROL_CLK_SELECT) | + PV_CONTROL_FIFO_CLR | + PV_CONTROL_EN); + +diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h +index b3b297fba709..385405a2df05 100644 +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -190,6 +190,8 @@ + # define PV_VCONTROL_ODD_DELAY_SHIFT 6 + # define PV_VCONTROL_ODD_FIRST BIT(5) + # define PV_VCONTROL_INTERLACE BIT(4) ++# define PV_VCONTROL_DSI BIT(3) ++# define PV_VCONTROL_COMMAND BIT(2) + # define PV_VCONTROL_CONTINUOUS BIT(1) + # define PV_VCONTROL_VIDEN BIT(0) + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1172_3e76a9f94b08602584397582d9d3010af1ab2e0a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1172_3e76a9f94b08602584397582d9d3010af1ab2e0a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1172_3e76a9f94b08602584397582d9d3010af1ab2e0a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1172_3e76a9f94b08602584397582d9d3010af1ab2e0a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,1822 @@ +commit 3e76a9f94b08602584397582d9d3010af1ab2e0a +Author: Eric Anholt +Date: Wed Feb 10 11:42:32 2016 -0800 + + drm/vc4: Add DSI driver + + The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. + Some registers move around, and the featureset is slightly different, + as DSI1 (the 4-lane DSI) is a later version of the hardware block. + This driver doesn't yet enable DSI0, since we don't have any hardware + to test against, but it does put a lot of the register definitions and + code in place. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig +index e53df59cb139..e1517d07cb7d 100644 +--- a/drivers/gpu/drm/vc4/Kconfig ++++ b/drivers/gpu/drm/vc4/Kconfig +@@ -2,10 +2,12 @@ config DRM_VC4 + tristate "Broadcom VC4 Graphics" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on DRM ++ depends on COMMON_CLK + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_GEM_CMA_HELPER + select DRM_PANEL ++ select DRM_MIPI_DSI + help + Choose this option if you have a system that has a Broadcom + VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835. +diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile +index 3358ec8775cf..897f658bee28 100644 +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -8,6 +8,7 @@ vc4-y := \ + vc4_crtc.o \ + vc4_drv.o \ + vc4_dpi.o \ ++ vc4_dsi.o \ + vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ +diff --git a/drivers/gpu/drm/vc4/vc4_debugfs.c b/drivers/gpu/drm/vc4/vc4_debugfs.c +index caf817bac885..3ca476c6e057 100644 +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -18,6 +18,7 @@ + static const struct drm_info_list vc4_debugfs_list[] = { + {"bo_stats", vc4_bo_stats_debugfs, 0}, + {"dpi_regs", vc4_dpi_debugfs_regs, 0}, ++ {"dsi1_regs", vc4_dsi_debugfs_regs, 0, (void *)(uintptr_t)1}, + {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, + {"vec_regs", vc4_vec_debugfs_regs, 0}, + {"hvs_regs", vc4_hvs_debugfs_regs, 0}, +diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c +index 281609353063..457e5e79ec8d 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -296,6 +296,7 @@ static struct platform_driver *const component_drivers[] = { + &vc4_hdmi_driver, + &vc4_vec_driver, + &vc4_dpi_driver, ++ &vc4_dsi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, + &vc4_firmware_kms_driver, +diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h +index 61a9b3e81823..44a8e6fda2b5 100644 +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -20,6 +20,7 @@ struct vc4_dev { + struct vc4_crtc *crtc[3]; + struct vc4_v3d *v3d; + struct vc4_dpi *dpi; ++ struct vc4_dsi *dsi1; + struct vc4_vec *vec; + + struct drm_fbdev_cma *fbdev; +@@ -468,6 +469,10 @@ void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index); + extern struct platform_driver vc4_dpi_driver; + int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_dsi.c */ ++extern struct platform_driver vc4_dsi_driver; ++int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused); ++ + /* vc4_firmware_kms.c */ + extern struct platform_driver vc4_firmware_kms_driver; + void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); +diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c +new file mode 100644 +index 000000000000..17fcac381dbb +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -0,0 +1,1725 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++/** ++ * DOC: VC4 DSI0/DSI1 module ++ * ++ * BCM2835 contains two DSI modules, DSI0 and DSI1. DSI0 is a ++ * single-lane DSI controller, while DSI1 is a more modern 4-lane DSI ++ * controller. ++ * ++ * Most Raspberry Pi boards expose DSI1 as their "DISPLAY" connector, ++ * while the compute module brings both DSI0 and DSI1 out. ++ * ++ * This driver has been tested for DSI1 video-mode display only ++ * currently, with most of the information necessary for DSI0 ++ * hopefully present. ++ */ ++ ++#include "drm_atomic_helper.h" ++#include "drm_crtc_helper.h" ++#include "drm_edid.h" ++#include "drm_mipi_dsi.h" ++#include "drm_panel.h" ++#include "linux/clk.h" ++#include "linux/clk-provider.h" ++#include "linux/completion.h" ++#include "linux/component.h" ++#include "linux/dmaengine.h" ++#include "linux/i2c.h" ++#include "linux/of_address.h" ++#include "linux/of_platform.h" ++#include "linux/pm_runtime.h" ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++ ++#define DSI_CMD_FIFO_DEPTH 16 ++#define DSI_PIX_FIFO_DEPTH 256 ++#define DSI_PIX_FIFO_WIDTH 4 ++ ++#define DSI0_CTRL 0x00 ++ ++/* Command packet control. */ ++#define DSI0_TXPKT1C 0x04 /* AKA PKTC */ ++#define DSI1_TXPKT1C 0x04 ++# define DSI_TXPKT1C_TRIG_CMD_MASK VC4_MASK(31, 24) ++# define DSI_TXPKT1C_TRIG_CMD_SHIFT 24 ++# define DSI_TXPKT1C_CMD_REPEAT_MASK VC4_MASK(23, 10) ++# define DSI_TXPKT1C_CMD_REPEAT_SHIFT 10 ++ ++# define DSI_TXPKT1C_DISPLAY_NO_MASK VC4_MASK(9, 8) ++# define DSI_TXPKT1C_DISPLAY_NO_SHIFT 8 ++/* Short, trigger, BTA, or a long packet that fits all in CMDFIFO. */ ++# define DSI_TXPKT1C_DISPLAY_NO_SHORT 0 ++/* Primary display where cmdfifo provides part of the payload and ++ * pixelvalve the rest. ++ */ ++# define DSI_TXPKT1C_DISPLAY_NO_PRIMARY 1 ++/* Secondary display where cmdfifo provides part of the payload and ++ * pixfifo the rest. ++ */ ++# define DSI_TXPKT1C_DISPLAY_NO_SECONDARY 2 ++ ++# define DSI_TXPKT1C_CMD_TX_TIME_MASK VC4_MASK(7, 6) ++# define DSI_TXPKT1C_CMD_TX_TIME_SHIFT 6 ++ ++# define DSI_TXPKT1C_CMD_CTRL_MASK VC4_MASK(5, 4) ++# define DSI_TXPKT1C_CMD_CTRL_SHIFT 4 ++/* Command only. Uses TXPKT1H and DISPLAY_NO */ ++# define DSI_TXPKT1C_CMD_CTRL_TX 0 ++/* Command with BTA for either ack or read data. */ ++# define DSI_TXPKT1C_CMD_CTRL_RX 1 ++/* Trigger according to TRIG_CMD */ ++# define DSI_TXPKT1C_CMD_CTRL_TRIG 2 ++/* BTA alone for getting error status after a command, or a TE trigger ++ * without a previous command. ++ */ ++# define DSI_TXPKT1C_CMD_CTRL_BTA 3 ++ ++# define DSI_TXPKT1C_CMD_MODE_LP BIT(3) ++# define DSI_TXPKT1C_CMD_TYPE_LONG BIT(2) ++# define DSI_TXPKT1C_CMD_TE_EN BIT(1) ++# define DSI_TXPKT1C_CMD_EN BIT(0) ++ ++/* Command packet header. */ ++#define DSI0_TXPKT1H 0x08 /* AKA PKTH */ ++#define DSI1_TXPKT1H 0x08 ++# define DSI_TXPKT1H_BC_CMDFIFO_MASK VC4_MASK(31, 24) ++# define DSI_TXPKT1H_BC_CMDFIFO_SHIFT 24 ++# define DSI_TXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_TXPKT1H_BC_PARAM_SHIFT 8 ++# define DSI_TXPKT1H_BC_DT_MASK VC4_MASK(7, 0) ++# define DSI_TXPKT1H_BC_DT_SHIFT 0 ++ ++#define DSI0_RXPKT1H 0x0c /* AKA RX1_PKTH */ ++#define DSI1_RXPKT1H 0x14 ++# define DSI_RXPKT1H_CRC_ERR BIT(31) ++# define DSI_RXPKT1H_DET_ERR BIT(30) ++# define DSI_RXPKT1H_ECC_ERR BIT(29) ++# define DSI_RXPKT1H_COR_ERR BIT(28) ++# define DSI_RXPKT1H_INCOMP_PKT BIT(25) ++# define DSI_RXPKT1H_PKT_TYPE_LONG BIT(24) ++/* Byte count if DSI_RXPKT1H_PKT_TYPE_LONG */ ++# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 ++/* Short return bytes if !DSI_RXPKT1H_PKT_TYPE_LONG */ ++# define DSI_RXPKT1H_SHORT_1_MASK VC4_MASK(23, 16) ++# define DSI_RXPKT1H_SHORT_1_SHIFT 16 ++# define DSI_RXPKT1H_SHORT_0_MASK VC4_MASK(15, 8) ++# define DSI_RXPKT1H_SHORT_0_SHIFT 8 ++# define DSI_RXPKT1H_DT_LP_CMD_MASK VC4_MASK(7, 0) ++# define DSI_RXPKT1H_DT_LP_CMD_SHIFT 0 ++ ++#define DSI0_RXPKT2H 0x10 /* AKA RX2_PKTH */ ++#define DSI1_RXPKT2H 0x18 ++# define DSI_RXPKT1H_DET_ERR BIT(30) ++# define DSI_RXPKT1H_ECC_ERR BIT(29) ++# define DSI_RXPKT1H_COR_ERR BIT(28) ++# define DSI_RXPKT1H_INCOMP_PKT BIT(25) ++# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 ++# define DSI_RXPKT1H_DT_MASK VC4_MASK(7, 0) ++# define DSI_RXPKT1H_DT_SHIFT 0 ++ ++#define DSI0_TXPKT_CMD_FIFO 0x14 /* AKA CMD_DATAF */ ++#define DSI1_TXPKT_CMD_FIFO 0x1c ++ ++#define DSI0_DISP0_CTRL 0x18 ++# define DSI_DISP0_PIX_CLK_DIV_MASK VC4_MASK(21, 13) ++# define DSI_DISP0_PIX_CLK_DIV_SHIFT 13 ++# define DSI_DISP0_LP_STOP_CTRL_MASK VC4_MASK(12, 11) ++# define DSI_DISP0_LP_STOP_CTRL_SHIFT 11 ++# define DSI_DISP0_LP_STOP_DISABLE 0 ++# define DSI_DISP0_LP_STOP_PERLINE 1 ++# define DSI_DISP0_LP_STOP_PERFRAME 2 ++ ++/* Transmit RGB pixels and null packets only during HACTIVE, instead ++ * of going to LP-STOP. ++ */ ++# define DSI_DISP_HACTIVE_NULL BIT(10) ++/* Transmit blanking packet only during vblank, instead of allowing LP-STOP. */ ++# define DSI_DISP_VBLP_CTRL BIT(9) ++/* Transmit blanking packet only during HFP, instead of allowing LP-STOP. */ ++# define DSI_DISP_HFP_CTRL BIT(8) ++/* Transmit blanking packet only during HBP, instead of allowing LP-STOP. */ ++# define DSI_DISP_HBP_CTRL BIT(7) ++# define DSI_DISP0_CHANNEL_MASK VC4_MASK(6, 5) ++# define DSI_DISP0_CHANNEL_SHIFT 5 ++/* Enables end events for HSYNC/VSYNC, not just start events. */ ++# define DSI_DISP0_ST_END BIT(4) ++# define DSI_DISP0_PFORMAT_MASK VC4_MASK(3, 2) ++# define DSI_DISP0_PFORMAT_SHIFT 2 ++# define DSI_PFORMAT_RGB565 0 ++# define DSI_PFORMAT_RGB666_PACKED 1 ++# define DSI_PFORMAT_RGB666 2 ++# define DSI_PFORMAT_RGB888 3 ++/* Default is VIDEO mode. */ ++# define DSI_DISP0_COMMAND_MODE BIT(1) ++# define DSI_DISP0_ENABLE BIT(0) ++ ++#define DSI0_DISP1_CTRL 0x1c ++#define DSI1_DISP1_CTRL 0x2c ++/* Format of the data written to TXPKT_PIX_FIFO. */ ++# define DSI_DISP1_PFORMAT_MASK VC4_MASK(2, 1) ++# define DSI_DISP1_PFORMAT_SHIFT 1 ++# define DSI_DISP1_PFORMAT_16BIT 0 ++# define DSI_DISP1_PFORMAT_24BIT 1 ++# define DSI_DISP1_PFORMAT_32BIT_LE 2 ++# define DSI_DISP1_PFORMAT_32BIT_BE 3 ++ ++/* DISP1 is always command mode. */ ++# define DSI_DISP1_ENABLE BIT(0) ++ ++#define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */ ++ ++#define DSI0_INT_STAT 0x24 ++#define DSI0_INT_EN 0x28 ++# define DSI1_INT_PHY_D3_ULPS BIT(30) ++# define DSI1_INT_PHY_D3_STOP BIT(29) ++# define DSI1_INT_PHY_D2_ULPS BIT(28) ++# define DSI1_INT_PHY_D2_STOP BIT(27) ++# define DSI1_INT_PHY_D1_ULPS BIT(26) ++# define DSI1_INT_PHY_D1_STOP BIT(25) ++# define DSI1_INT_PHY_D0_ULPS BIT(24) ++# define DSI1_INT_PHY_D0_STOP BIT(23) ++# define DSI1_INT_FIFO_ERR BIT(22) ++# define DSI1_INT_PHY_DIR_RTF BIT(21) ++# define DSI1_INT_PHY_RXLPDT BIT(20) ++# define DSI1_INT_PHY_RXTRIG BIT(19) ++# define DSI1_INT_PHY_D0_LPDT BIT(18) ++# define DSI1_INT_PHY_DIR_FTR BIT(17) ++ ++/* Signaled when the clock lane enters the given state. */ ++# define DSI1_INT_PHY_CLOCK_ULPS BIT(16) ++# define DSI1_INT_PHY_CLOCK_HS BIT(15) ++# define DSI1_INT_PHY_CLOCK_STOP BIT(14) ++ ++/* Signaled on timeouts */ ++# define DSI1_INT_PR_TO BIT(13) ++# define DSI1_INT_TA_TO BIT(12) ++# define DSI1_INT_LPRX_TO BIT(11) ++# define DSI1_INT_HSTX_TO BIT(10) ++ ++/* Contention on a line when trying to drive the line low */ ++# define DSI1_INT_ERR_CONT_LP1 BIT(9) ++# define DSI1_INT_ERR_CONT_LP0 BIT(8) ++ ++/* Control error: incorrect line state sequence on data lane 0. */ ++# define DSI1_INT_ERR_CONTROL BIT(7) ++/* LPDT synchronization error (bits received not a multiple of 8. */ ++ ++# define DSI1_INT_ERR_SYNC_ESC BIT(6) ++/* Signaled after receiving an error packet from the display in ++ * response to a read. ++ */ ++# define DSI1_INT_RXPKT2 BIT(5) ++/* Signaled after receiving a packet. The header and optional short ++ * response will be in RXPKT1H, and a long response will be in the ++ * RXPKT_FIFO. ++ */ ++# define DSI1_INT_RXPKT1 BIT(4) ++# define DSI1_INT_TXPKT2_DONE BIT(3) ++# define DSI1_INT_TXPKT2_END BIT(2) ++/* Signaled after all repeats of TXPKT1 are transferred. */ ++# define DSI1_INT_TXPKT1_DONE BIT(1) ++/* Signaled after each TXPKT1 repeat is scheduled. */ ++# define DSI1_INT_TXPKT1_END BIT(0) ++ ++#define DSI1_INTERRUPTS_ALWAYS_ENABLED (DSI1_INT_ERR_SYNC_ESC | \ ++ DSI1_INT_ERR_CONTROL | \ ++ DSI1_INT_ERR_CONT_LP0 | \ ++ DSI1_INT_ERR_CONT_LP1 | \ ++ DSI1_INT_HSTX_TO | \ ++ DSI1_INT_LPRX_TO | \ ++ DSI1_INT_TA_TO | \ ++ DSI1_INT_PR_TO) ++ ++#define DSI0_STAT 0x2c ++#define DSI0_HSTX_TO_CNT 0x30 ++#define DSI0_LPRX_TO_CNT 0x34 ++#define DSI0_TA_TO_CNT 0x38 ++#define DSI0_PR_TO_CNT 0x3c ++#define DSI0_PHYC 0x40 ++# define DSI1_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(25, 20) ++# define DSI1_PHYC_ESC_CLK_LPDT_SHIFT 20 ++# define DSI1_PHYC_HS_CLK_CONTINUOUS BIT(18) ++# define DSI0_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(17, 12) ++# define DSI0_PHYC_ESC_CLK_LPDT_SHIFT 12 ++# define DSI1_PHYC_CLANE_ULPS BIT(17) ++# define DSI1_PHYC_CLANE_ENABLE BIT(16) ++# define DSI_PHYC_DLANE3_ULPS BIT(13) ++# define DSI_PHYC_DLANE3_ENABLE BIT(12) ++# define DSI0_PHYC_HS_CLK_CONTINUOUS BIT(10) ++# define DSI0_PHYC_CLANE_ULPS BIT(9) ++# define DSI_PHYC_DLANE2_ULPS BIT(9) ++# define DSI0_PHYC_CLANE_ENABLE BIT(8) ++# define DSI_PHYC_DLANE2_ENABLE BIT(8) ++# define DSI_PHYC_DLANE1_ULPS BIT(5) ++# define DSI_PHYC_DLANE1_ENABLE BIT(4) ++# define DSI_PHYC_DLANE0_FORCE_STOP BIT(2) ++# define DSI_PHYC_DLANE0_ULPS BIT(1) ++# define DSI_PHYC_DLANE0_ENABLE BIT(0) ++ ++#define DSI0_HS_CLT0 0x44 ++#define DSI0_HS_CLT1 0x48 ++#define DSI0_HS_CLT2 0x4c ++#define DSI0_HS_DLT3 0x50 ++#define DSI0_HS_DLT4 0x54 ++#define DSI0_HS_DLT5 0x58 ++#define DSI0_HS_DLT6 0x5c ++#define DSI0_HS_DLT7 0x60 ++ ++#define DSI0_PHY_AFEC0 0x64 ++# define DSI0_PHY_AFEC0_DDR2CLK_EN BIT(26) ++# define DSI0_PHY_AFEC0_DDRCLK_EN BIT(25) ++# define DSI0_PHY_AFEC0_LATCH_ULPS BIT(24) ++# define DSI1_PHY_AFEC0_IDR_DLANE3_MASK VC4_MASK(31, 29) ++# define DSI1_PHY_AFEC0_IDR_DLANE3_SHIFT 29 ++# define DSI1_PHY_AFEC0_IDR_DLANE2_MASK VC4_MASK(28, 26) ++# define DSI1_PHY_AFEC0_IDR_DLANE2_SHIFT 26 ++# define DSI1_PHY_AFEC0_IDR_DLANE1_MASK VC4_MASK(27, 23) ++# define DSI1_PHY_AFEC0_IDR_DLANE1_SHIFT 23 ++# define DSI1_PHY_AFEC0_IDR_DLANE0_MASK VC4_MASK(22, 20) ++# define DSI1_PHY_AFEC0_IDR_DLANE0_SHIFT 20 ++# define DSI1_PHY_AFEC0_IDR_CLANE_MASK VC4_MASK(19, 17) ++# define DSI1_PHY_AFEC0_IDR_CLANE_SHIFT 17 ++# define DSI0_PHY_AFEC0_ACTRL_DLANE1_MASK VC4_MASK(23, 20) ++# define DSI0_PHY_AFEC0_ACTRL_DLANE1_SHIFT 20 ++# define DSI0_PHY_AFEC0_ACTRL_DLANE0_MASK VC4_MASK(19, 16) ++# define DSI0_PHY_AFEC0_ACTRL_DLANE0_SHIFT 16 ++# define DSI0_PHY_AFEC0_ACTRL_CLANE_MASK VC4_MASK(15, 12) ++# define DSI0_PHY_AFEC0_ACTRL_CLANE_SHIFT 12 ++# define DSI1_PHY_AFEC0_DDR2CLK_EN BIT(16) ++# define DSI1_PHY_AFEC0_DDRCLK_EN BIT(15) ++# define DSI1_PHY_AFEC0_LATCH_ULPS BIT(14) ++# define DSI1_PHY_AFEC0_RESET BIT(13) ++# define DSI1_PHY_AFEC0_PD BIT(12) ++# define DSI0_PHY_AFEC0_RESET BIT(11) ++# define DSI1_PHY_AFEC0_PD_BG BIT(11) ++# define DSI0_PHY_AFEC0_PD BIT(10) ++# define DSI1_PHY_AFEC0_PD_DLANE3 BIT(10) ++# define DSI0_PHY_AFEC0_PD_BG BIT(9) ++# define DSI1_PHY_AFEC0_PD_DLANE2 BIT(9) ++# define DSI0_PHY_AFEC0_PD_DLANE1 BIT(8) ++# define DSI1_PHY_AFEC0_PD_DLANE1 BIT(8) ++# define DSI_PHY_AFEC0_PTATADJ_MASK VC4_MASK(7, 4) ++# define DSI_PHY_AFEC0_PTATADJ_SHIFT 4 ++# define DSI_PHY_AFEC0_CTATADJ_MASK VC4_MASK(3, 0) ++# define DSI_PHY_AFEC0_CTATADJ_SHIFT 0 ++ ++#define DSI0_PHY_AFEC1 0x68 ++# define DSI0_PHY_AFEC1_IDR_DLANE1_MASK VC4_MASK(10, 8) ++# define DSI0_PHY_AFEC1_IDR_DLANE1_SHIFT 8 ++# define DSI0_PHY_AFEC1_IDR_DLANE0_MASK VC4_MASK(6, 4) ++# define DSI0_PHY_AFEC1_IDR_DLANE0_SHIFT 4 ++# define DSI0_PHY_AFEC1_IDR_CLANE_MASK VC4_MASK(2, 0) ++# define DSI0_PHY_AFEC1_IDR_CLANE_SHIFT 0 ++ ++#define DSI0_TST_SEL 0x6c ++#define DSI0_TST_MON 0x70 ++#define DSI0_ID 0x74 ++# define DSI_ID_VALUE 0x00647369 ++ ++#define DSI1_CTRL 0x00 ++# define DSI_CTRL_HS_CLKC_MASK VC4_MASK(15, 14) ++# define DSI_CTRL_HS_CLKC_SHIFT 14 ++# define DSI_CTRL_HS_CLKC_BYTE 0 ++# define DSI_CTRL_HS_CLKC_DDR2 1 ++# define DSI_CTRL_HS_CLKC_DDR 2 ++ ++# define DSI_CTRL_RX_LPDT_EOT_DISABLE BIT(13) ++# define DSI_CTRL_LPDT_EOT_DISABLE BIT(12) ++# define DSI_CTRL_HSDT_EOT_DISABLE BIT(11) ++# define DSI_CTRL_SOFT_RESET_CFG BIT(10) ++# define DSI_CTRL_CAL_BYTE BIT(9) ++# define DSI_CTRL_INV_BYTE BIT(8) ++# define DSI_CTRL_CLR_LDF BIT(7) ++# define DSI0_CTRL_CLR_PBCF BIT(6) ++# define DSI1_CTRL_CLR_RXF BIT(6) ++# define DSI0_CTRL_CLR_CPBCF BIT(5) ++# define DSI1_CTRL_CLR_PDF BIT(5) ++# define DSI0_CTRL_CLR_PDF BIT(4) ++# define DSI1_CTRL_CLR_CDF BIT(4) ++# define DSI0_CTRL_CLR_CDF BIT(3) ++# define DSI0_CTRL_CTRL2 BIT(2) ++# define DSI1_CTRL_DISABLE_DISP_CRCC BIT(2) ++# define DSI0_CTRL_CTRL1 BIT(1) ++# define DSI1_CTRL_DISABLE_DISP_ECCC BIT(1) ++# define DSI0_CTRL_CTRL0 BIT(0) ++# define DSI1_CTRL_EN BIT(0) ++# define DSI0_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ ++ DSI0_CTRL_CLR_PBCF | \ ++ DSI0_CTRL_CLR_CPBCF | \ ++ DSI0_CTRL_CLR_PDF | \ ++ DSI0_CTRL_CLR_CDF) ++# define DSI1_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ ++ DSI1_CTRL_CLR_RXF | \ ++ DSI1_CTRL_CLR_PDF | \ ++ DSI1_CTRL_CLR_CDF) ++ ++#define DSI1_TXPKT2C 0x0c ++#define DSI1_TXPKT2H 0x10 ++#define DSI1_TXPKT_PIX_FIFO 0x20 ++#define DSI1_RXPKT_FIFO 0x24 ++#define DSI1_DISP0_CTRL 0x28 ++#define DSI1_INT_STAT 0x30 ++#define DSI1_INT_EN 0x34 ++/* State reporting bits. These mostly behave like INT_STAT, where ++ * writing a 1 clears the bit. ++ */ ++#define DSI1_STAT 0x38 ++# define DSI1_STAT_PHY_D3_ULPS BIT(31) ++# define DSI1_STAT_PHY_D3_STOP BIT(30) ++# define DSI1_STAT_PHY_D2_ULPS BIT(29) ++# define DSI1_STAT_PHY_D2_STOP BIT(28) ++# define DSI1_STAT_PHY_D1_ULPS BIT(27) ++# define DSI1_STAT_PHY_D1_STOP BIT(26) ++# define DSI1_STAT_PHY_D0_ULPS BIT(25) ++# define DSI1_STAT_PHY_D0_STOP BIT(24) ++# define DSI1_STAT_FIFO_ERR BIT(23) ++# define DSI1_STAT_PHY_RXLPDT BIT(22) ++# define DSI1_STAT_PHY_RXTRIG BIT(21) ++# define DSI1_STAT_PHY_D0_LPDT BIT(20) ++/* Set when in forward direction */ ++# define DSI1_STAT_PHY_DIR BIT(19) ++# define DSI1_STAT_PHY_CLOCK_ULPS BIT(18) ++# define DSI1_STAT_PHY_CLOCK_HS BIT(17) ++# define DSI1_STAT_PHY_CLOCK_STOP BIT(16) ++# define DSI1_STAT_PR_TO BIT(15) ++# define DSI1_STAT_TA_TO BIT(14) ++# define DSI1_STAT_LPRX_TO BIT(13) ++# define DSI1_STAT_HSTX_TO BIT(12) ++# define DSI1_STAT_ERR_CONT_LP1 BIT(11) ++# define DSI1_STAT_ERR_CONT_LP0 BIT(10) ++# define DSI1_STAT_ERR_CONTROL BIT(9) ++# define DSI1_STAT_ERR_SYNC_ESC BIT(8) ++# define DSI1_STAT_RXPKT2 BIT(7) ++# define DSI1_STAT_RXPKT1 BIT(6) ++# define DSI1_STAT_TXPKT2_BUSY BIT(5) ++# define DSI1_STAT_TXPKT2_DONE BIT(4) ++# define DSI1_STAT_TXPKT2_END BIT(3) ++# define DSI1_STAT_TXPKT1_BUSY BIT(2) ++# define DSI1_STAT_TXPKT1_DONE BIT(1) ++# define DSI1_STAT_TXPKT1_END BIT(0) ++ ++#define DSI1_HSTX_TO_CNT 0x3c ++#define DSI1_LPRX_TO_CNT 0x40 ++#define DSI1_TA_TO_CNT 0x44 ++#define DSI1_PR_TO_CNT 0x48 ++#define DSI1_PHYC 0x4c ++ ++#define DSI1_HS_CLT0 0x50 ++# define DSI_HS_CLT0_CZERO_MASK VC4_MASK(26, 18) ++# define DSI_HS_CLT0_CZERO_SHIFT 18 ++# define DSI_HS_CLT0_CPRE_MASK VC4_MASK(17, 9) ++# define DSI_HS_CLT0_CPRE_SHIFT 9 ++# define DSI_HS_CLT0_CPREP_MASK VC4_MASK(8, 0) ++# define DSI_HS_CLT0_CPREP_SHIFT 0 ++ ++#define DSI1_HS_CLT1 0x54 ++# define DSI_HS_CLT1_CTRAIL_MASK VC4_MASK(17, 9) ++# define DSI_HS_CLT1_CTRAIL_SHIFT 9 ++# define DSI_HS_CLT1_CPOST_MASK VC4_MASK(8, 0) ++# define DSI_HS_CLT1_CPOST_SHIFT 0 ++ ++#define DSI1_HS_CLT2 0x58 ++# define DSI_HS_CLT2_WUP_MASK VC4_MASK(23, 0) ++# define DSI_HS_CLT2_WUP_SHIFT 0 ++ ++#define DSI1_HS_DLT3 0x5c ++# define DSI_HS_DLT3_EXIT_MASK VC4_MASK(26, 18) ++# define DSI_HS_DLT3_EXIT_SHIFT 18 ++# define DSI_HS_DLT3_ZERO_MASK VC4_MASK(17, 9) ++# define DSI_HS_DLT3_ZERO_SHIFT 9 ++# define DSI_HS_DLT3_PRE_MASK VC4_MASK(8, 0) ++# define DSI_HS_DLT3_PRE_SHIFT 0 ++ ++#define DSI1_HS_DLT4 0x60 ++# define DSI_HS_DLT4_ANLAT_MASK VC4_MASK(22, 18) ++# define DSI_HS_DLT4_ANLAT_SHIFT 18 ++# define DSI_HS_DLT4_TRAIL_MASK VC4_MASK(17, 9) ++# define DSI_HS_DLT4_TRAIL_SHIFT 9 ++# define DSI_HS_DLT4_LPX_MASK VC4_MASK(8, 0) ++# define DSI_HS_DLT4_LPX_SHIFT 0 ++ ++#define DSI1_HS_DLT5 0x64 ++# define DSI_HS_DLT5_INIT_MASK VC4_MASK(23, 0) ++# define DSI_HS_DLT5_INIT_SHIFT 0 ++ ++#define DSI1_HS_DLT6 0x68 ++# define DSI_HS_DLT6_TA_GET_MASK VC4_MASK(31, 24) ++# define DSI_HS_DLT6_TA_GET_SHIFT 24 ++# define DSI_HS_DLT6_TA_SURE_MASK VC4_MASK(23, 16) ++# define DSI_HS_DLT6_TA_SURE_SHIFT 16 ++# define DSI_HS_DLT6_TA_GO_MASK VC4_MASK(15, 8) ++# define DSI_HS_DLT6_TA_GO_SHIFT 8 ++# define DSI_HS_DLT6_LP_LPX_MASK VC4_MASK(7, 0) ++# define DSI_HS_DLT6_LP_LPX_SHIFT 0 ++ ++#define DSI1_HS_DLT7 0x6c ++# define DSI_HS_DLT7_LP_WUP_MASK VC4_MASK(23, 0) ++# define DSI_HS_DLT7_LP_WUP_SHIFT 0 ++ ++#define DSI1_PHY_AFEC0 0x70 ++ ++#define DSI1_PHY_AFEC1 0x74 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE3_MASK VC4_MASK(19, 16) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE3_SHIFT 16 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE2_MASK VC4_MASK(15, 12) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE2_SHIFT 12 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE1_MASK VC4_MASK(11, 8) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE1_SHIFT 8 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE0_MASK VC4_MASK(7, 4) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE0_SHIFT 4 ++# define DSI1_PHY_AFEC1_ACTRL_CLANE_MASK VC4_MASK(3, 0) ++# define DSI1_PHY_AFEC1_ACTRL_CLANE_SHIFT 0 ++ ++#define DSI1_TST_SEL 0x78 ++#define DSI1_TST_MON 0x7c ++#define DSI1_PHY_TST1 0x80 ++#define DSI1_PHY_TST2 0x84 ++#define DSI1_PHY_FIFO_STAT 0x88 ++/* Actually, all registers in the range that aren't otherwise claimed ++ * will return the ID. ++ */ ++#define DSI1_ID 0x8c ++ ++/* General DSI hardware state. */ ++struct vc4_dsi { ++ struct platform_device *pdev; ++ ++ struct mipi_dsi_host dsi_host; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ struct drm_panel *panel; ++ ++ void __iomem *regs; ++ ++ struct dma_chan *reg_dma_chan; ++ dma_addr_t reg_dma_paddr; ++ u32 *reg_dma_mem; ++ dma_addr_t reg_paddr; ++ ++ /* Whether we're on bcm2835's DSI0 or DSI1. */ ++ int port; ++ ++ /* DSI channel for the panel we're connected to. */ ++ u32 channel; ++ u32 lanes; ++ enum mipi_dsi_pixel_format format; ++ u32 mode_flags; ++ ++ /* Input clock from CPRMAN to the digital PHY, for the DSI ++ * escape clock. ++ */ ++ struct clk *escape_clock; ++ ++ /* Input clock to the analog PHY, used to generate the DSI bit ++ * clock. ++ */ ++ struct clk *pll_phy_clock; ++ ++ /* HS Clocks generated within the DSI analog PHY. */ ++ struct clk_fixed_factor phy_clocks[3]; ++ ++ struct clk_onecell_data clk_onecell; ++ ++ /* Pixel clock output to the pixelvalve, generated from the HS ++ * clock. ++ */ ++ struct clk *pixel_clock; ++ ++ struct completion xfer_completion; ++ int xfer_result; ++}; ++ ++#define host_to_dsi(host) container_of(host, struct vc4_dsi, dsi_host) ++ ++static inline void ++dsi_dma_workaround_write(struct vc4_dsi *dsi, u32 offset, u32 val) ++{ ++ struct dma_chan *chan = dsi->reg_dma_chan; ++ struct dma_async_tx_descriptor *tx; ++ dma_cookie_t cookie; ++ int ret; ++ ++ /* DSI0 should be able to write normally. */ ++ if (!chan) { ++ writel(val, dsi->regs + offset); ++ return; ++ } ++ ++ *dsi->reg_dma_mem = val; ++ ++ tx = chan->device->device_prep_dma_memcpy(chan, ++ dsi->reg_paddr + offset, ++ dsi->reg_dma_paddr, ++ 4, 0); ++ if (!tx) { ++ DRM_ERROR("Failed to set up DMA register write\n"); ++ return; ++ } ++ ++ cookie = tx->tx_submit(tx); ++ ret = dma_submit_error(cookie); ++ if (ret) { ++ DRM_ERROR("Failed to submit DMA: %d\n", ret); ++ return; ++ } ++ ret = dma_sync_wait(chan, cookie); ++ if (ret) ++ DRM_ERROR("Failed to wait for DMA: %d\n", ret); ++} ++ ++#define DSI_READ(offset) readl(dsi->regs + (offset)) ++#define DSI_WRITE(offset, val) dsi_dma_workaround_write(dsi, offset, val) ++#define DSI_PORT_READ(offset) \ ++ DSI_READ(dsi->port ? DSI1_##offset : DSI0_##offset) ++#define DSI_PORT_WRITE(offset, val) \ ++ DSI_WRITE(dsi->port ? DSI1_##offset : DSI0_##offset, val) ++#define DSI_PORT_BIT(bit) (dsi->port ? DSI1_##bit : DSI0_##bit) ++ ++/* VC4 DSI encoder KMS struct */ ++struct vc4_dsi_encoder { ++ struct vc4_encoder base; ++ struct vc4_dsi *dsi; ++}; ++ ++static inline struct vc4_dsi_encoder * ++to_vc4_dsi_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_dsi_encoder, base.base); ++} ++ ++/* VC4 DSI connector KMS struct */ ++struct vc4_dsi_connector { ++ struct drm_connector base; ++ struct vc4_dsi *dsi; ++}; ++ ++static inline struct vc4_dsi_connector * ++to_vc4_dsi_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_dsi_connector, base); ++} ++ ++#define DSI_REG(reg) { reg, #reg } ++static const struct { ++ u32 reg; ++ const char *name; ++} dsi0_regs[] = { ++ DSI_REG(DSI0_CTRL), ++ DSI_REG(DSI0_STAT), ++ DSI_REG(DSI0_HSTX_TO_CNT), ++ DSI_REG(DSI0_LPRX_TO_CNT), ++ DSI_REG(DSI0_TA_TO_CNT), ++ DSI_REG(DSI0_PR_TO_CNT), ++ DSI_REG(DSI0_DISP0_CTRL), ++ DSI_REG(DSI0_DISP1_CTRL), ++ DSI_REG(DSI0_INT_STAT), ++ DSI_REG(DSI0_INT_EN), ++ DSI_REG(DSI0_PHYC), ++ DSI_REG(DSI0_HS_CLT0), ++ DSI_REG(DSI0_HS_CLT1), ++ DSI_REG(DSI0_HS_CLT2), ++ DSI_REG(DSI0_HS_DLT3), ++ DSI_REG(DSI0_HS_DLT4), ++ DSI_REG(DSI0_HS_DLT5), ++ DSI_REG(DSI0_HS_DLT6), ++ DSI_REG(DSI0_HS_DLT7), ++ DSI_REG(DSI0_PHY_AFEC0), ++ DSI_REG(DSI0_PHY_AFEC1), ++ DSI_REG(DSI0_ID), ++}; ++ ++static const struct { ++ u32 reg; ++ const char *name; ++} dsi1_regs[] = { ++ DSI_REG(DSI1_CTRL), ++ DSI_REG(DSI1_STAT), ++ DSI_REG(DSI1_HSTX_TO_CNT), ++ DSI_REG(DSI1_LPRX_TO_CNT), ++ DSI_REG(DSI1_TA_TO_CNT), ++ DSI_REG(DSI1_PR_TO_CNT), ++ DSI_REG(DSI1_DISP0_CTRL), ++ DSI_REG(DSI1_DISP1_CTRL), ++ DSI_REG(DSI1_INT_STAT), ++ DSI_REG(DSI1_INT_EN), ++ DSI_REG(DSI1_PHYC), ++ DSI_REG(DSI1_HS_CLT0), ++ DSI_REG(DSI1_HS_CLT1), ++ DSI_REG(DSI1_HS_CLT2), ++ DSI_REG(DSI1_HS_DLT3), ++ DSI_REG(DSI1_HS_DLT4), ++ DSI_REG(DSI1_HS_DLT5), ++ DSI_REG(DSI1_HS_DLT6), ++ DSI_REG(DSI1_HS_DLT7), ++ DSI_REG(DSI1_PHY_AFEC0), ++ DSI_REG(DSI1_PHY_AFEC1), ++ DSI_REG(DSI1_ID), ++}; ++ ++static void vc4_dsi_dump_regs(struct vc4_dsi *dsi) ++{ ++ int i; ++ ++ if (dsi->port == 0) { ++ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { ++ DRM_INFO("0x%04x (%s): 0x%08x\n", ++ dsi0_regs[i].reg, dsi0_regs[i].name, ++ DSI_READ(dsi0_regs[i].reg)); ++ } ++ } else { ++ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { ++ DRM_INFO("0x%04x (%s): 0x%08x\n", ++ dsi1_regs[i].reg, dsi1_regs[i].name, ++ DSI_READ(dsi1_regs[i].reg)); ++ } ++ } ++} ++ ++#ifdef CONFIG_DEBUG_FS ++int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused) ++{ ++ struct drm_info_node *node = (struct drm_info_node *)m->private; ++ struct drm_device *drm = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ int dsi_index = (uintptr_t)node->info_ent->data; ++ struct vc4_dsi *dsi = (dsi_index == 1 ? vc4->dsi1 : NULL); ++ int i; ++ ++ if (!dsi) ++ return 0; ++ ++ if (dsi->port == 0) { ++ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { ++ seq_printf(m, "0x%04x (%s): 0x%08x\n", ++ dsi0_regs[i].reg, dsi0_regs[i].name, ++ DSI_READ(dsi0_regs[i].reg)); ++ } ++ } else { ++ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { ++ seq_printf(m, "0x%04x (%s): 0x%08x\n", ++ dsi1_regs[i].reg, dsi1_regs[i].name, ++ DSI_READ(dsi1_regs[i].reg)); ++ } ++ } ++ ++ return 0; ++} ++#endif ++ ++static enum drm_connector_status ++vc4_dsi_connector_detect(struct drm_connector *connector, bool force) ++{ ++ struct vc4_dsi_connector *vc4_connector = ++ to_vc4_dsi_connector(connector); ++ struct vc4_dsi *dsi = vc4_connector->dsi; ++ ++ if (dsi->panel) ++ return connector_status_connected; ++ else ++ return connector_status_disconnected; ++} ++ ++static void vc4_dsi_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static int vc4_dsi_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_dsi_connector *vc4_connector = ++ to_vc4_dsi_connector(connector); ++ struct vc4_dsi *dsi = vc4_connector->dsi; ++ ++ if (dsi->panel) ++ return drm_panel_get_modes(dsi->panel); ++ ++ return 0; ++} ++ ++static const struct drm_connector_funcs vc4_dsi_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_dsi_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_dsi_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_dsi_connector_helper_funcs = { ++ .get_modes = vc4_dsi_connector_get_modes, ++}; ++ ++static struct drm_connector *vc4_dsi_connector_init(struct drm_device *dev, ++ struct vc4_dsi *dsi) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_dsi_connector *dsi_connector; ++ int ret = 0; ++ ++ dsi_connector = devm_kzalloc(dev->dev, sizeof(*dsi_connector), ++ GFP_KERNEL); ++ if (!dsi_connector) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ connector = &dsi_connector->base; ++ ++ dsi_connector->dsi = dsi; ++ ++ drm_connector_init(dev, connector, &vc4_dsi_connector_funcs, ++ DRM_MODE_CONNECTOR_DSI); ++ drm_connector_helper_add(connector, &vc4_dsi_connector_helper_funcs); ++ ++ connector->polled = 0; ++ connector->interlace_allowed = 0; ++ connector->doublescan_allowed = 0; ++ ++ drm_mode_connector_attach_encoder(connector, dsi->encoder); ++ ++ return connector; ++ ++fail: ++ if (connector) ++ vc4_dsi_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_dsi_encoder_destroy(struct drm_encoder *encoder) ++{ ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_dsi_encoder_funcs = { ++ .destroy = vc4_dsi_encoder_destroy, ++}; ++ ++static void vc4_dsi_latch_ulps(struct vc4_dsi *dsi, bool latch) ++{ ++ u32 afec0 = DSI_PORT_READ(PHY_AFEC0); ++ ++ if (latch) ++ afec0 |= DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); ++ else ++ afec0 &= ~DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++} ++ ++/* Enters or exits Ultra Low Power State. */ ++static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps) ++{ ++ bool continuous = dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS; ++ u32 phyc_ulps = ((continuous ? DSI_PORT_BIT(PHYC_CLANE_ULPS) : 0) | ++ DSI_PHYC_DLANE0_ULPS | ++ (dsi->lanes > 1 ? DSI_PHYC_DLANE1_ULPS : 0) | ++ (dsi->lanes > 2 ? DSI_PHYC_DLANE2_ULPS : 0) | ++ (dsi->lanes > 3 ? DSI_PHYC_DLANE3_ULPS : 0)); ++ u32 stat_ulps = ((continuous ? DSI1_STAT_PHY_CLOCK_ULPS : 0) | ++ DSI1_STAT_PHY_D0_ULPS | ++ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_ULPS : 0) | ++ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_ULPS : 0) | ++ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_ULPS : 0)); ++ u32 stat_stop = ((continuous ? DSI1_STAT_PHY_CLOCK_STOP : 0) | ++ DSI1_STAT_PHY_D0_STOP | ++ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_STOP : 0) | ++ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) | ++ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0)); ++ int ret; ++ ++ DSI_PORT_WRITE(STAT, stat_ulps); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps); ++ ret = wait_for((DSI_PORT_READ(STAT) & stat_ulps) == stat_ulps, 200); ++ if (ret) { ++ dev_warn(&dsi->pdev->dev, ++ "Timeout waiting for DSI ULPS entry: STAT 0x%08x", ++ DSI_PORT_READ(STAT)); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ vc4_dsi_latch_ulps(dsi, false); ++ return; ++ } ++ ++ /* The DSI module can't be disabled while the module is ++ * generating ULPS state. So, to be able to disable the ++ * module, we have the AFE latch the ULPS state and continue ++ * on to having the module enter STOP. ++ */ ++ vc4_dsi_latch_ulps(dsi, ulps); ++ ++ DSI_PORT_WRITE(STAT, stat_stop); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ ret = wait_for((DSI_PORT_READ(STAT) & stat_stop) == stat_stop, 200); ++ if (ret) { ++ dev_warn(&dsi->pdev->dev, ++ "Timeout waiting for DSI STOP entry: STAT 0x%08x", ++ DSI_PORT_READ(STAT)); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ return; ++ } ++} ++ ++static u32 ++dsi_hs_timing(u32 ui_ns, u32 ns, u32 ui) ++{ ++ /* The HS timings have to be rounded up to a multiple of 8 ++ * because we're using the byte clock. ++ */ ++ return roundup(ui + DIV_ROUND_UP(ns, ui_ns), 8); ++} ++ ++/* ESC always runs at 100Mhz. */ ++#define ESC_TIME_NS 10 ++ ++static u32 ++dsi_esc_timing(u32 ns) ++{ ++ return DIV_ROUND_UP(ns, ESC_TIME_NS); ++} ++ ++static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) ++{ ++ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); ++ struct vc4_dsi *dsi = vc4_encoder->dsi; ++ struct device *dev = &dsi->pdev->dev; ++ ++ drm_panel_disable(dsi->panel); ++ ++ vc4_dsi_ulps(dsi, true); ++ ++ drm_panel_unprepare(dsi->panel); ++ ++ clk_disable_unprepare(dsi->pll_phy_clock); ++ clk_disable_unprepare(dsi->escape_clock); ++ clk_disable_unprepare(dsi->pixel_clock); ++ ++ pm_runtime_put(dev); ++} ++ ++static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) ++{ ++ struct drm_display_mode *mode = &encoder->crtc->mode; ++ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); ++ struct vc4_dsi *dsi = vc4_encoder->dsi; ++ struct device *dev = &dsi->pdev->dev; ++ u32 format = 0, divider = 0; ++ bool debug_dump_regs = false; ++ unsigned long hs_clock; ++ u32 ui_ns; ++ /* Minimum LP state duration in escape clock cycles. */ ++ u32 lpx = dsi_esc_timing(60); ++ unsigned long pixel_clock_hz = mode->clock * 1000; ++ unsigned long dsip_clock; ++ unsigned long phy_clock; ++ int ret; ++ ++ ret = pm_runtime_get_sync(dev); ++ if (ret) { ++ DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->port); ++ return; ++ } ++ ++ ret = drm_panel_prepare(dsi->panel); ++ if (ret) { ++ DRM_ERROR("Panel failed to prepare\n"); ++ return; ++ } ++ ++ if (debug_dump_regs) { ++ DRM_INFO("DSI regs before:\n"); ++ vc4_dsi_dump_regs(dsi); ++ } ++ ++ switch (dsi->format) { ++ case MIPI_DSI_FMT_RGB888: ++ format = DSI_PFORMAT_RGB888; ++ divider = 24 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB666: ++ format = DSI_PFORMAT_RGB666; ++ divider = 24 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB666_PACKED: ++ format = DSI_PFORMAT_RGB666_PACKED; ++ divider = 18 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB565: ++ format = DSI_PFORMAT_RGB565; ++ divider = 16 / dsi->lanes; ++ break; ++ } ++ ++ phy_clock = pixel_clock_hz * divider; ++ ret = clk_set_rate(dsi->pll_phy_clock, phy_clock); ++ if (ret) { ++ dev_err(&dsi->pdev->dev, ++ "Failed to set phy clock to %ld: %d\n", phy_clock, ret); ++ } ++ ++ /* Reset the DSI and all its fifos. */ ++ DSI_PORT_WRITE(CTRL, ++ DSI_CTRL_SOFT_RESET_CFG | ++ DSI_PORT_BIT(CTRL_RESET_FIFOS)); ++ ++ DSI_PORT_WRITE(CTRL, ++ DSI_CTRL_HSDT_EOT_DISABLE | ++ DSI_CTRL_RX_LPDT_EOT_DISABLE); ++ ++ /* Clear all stat bits so we see what has happened during enable. */ ++ DSI_PORT_WRITE(STAT, DSI_PORT_READ(STAT)); ++ ++ /* Set AFE CTR00/CTR1 to release powerdown of analog. */ ++ if (dsi->port == 0) { ++ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | ++ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ)); ++ ++ if (dsi->lanes < 2) ++ afec0 |= DSI0_PHY_AFEC0_PD_DLANE1; ++ ++ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) ++ afec0 |= DSI0_PHY_AFEC0_RESET; ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++ ++ DSI_PORT_WRITE(PHY_AFEC1, ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) | ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) | ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_CLANE)); ++ } else { ++ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | ++ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_CLANE) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE0) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE1) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE2) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE3)); ++ ++ if (dsi->lanes < 4) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE3; ++ if (dsi->lanes < 3) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE2; ++ if (dsi->lanes < 2) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE1; ++ ++ afec0 |= DSI1_PHY_AFEC0_RESET; ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++ ++ DSI_PORT_WRITE(PHY_AFEC1, 0); ++ ++ /* AFEC reset hold time */ ++ mdelay(1); ++ } ++ ++ ret = clk_prepare_enable(dsi->escape_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI escape clock: %d\n", ret); ++ return; ++ } ++ ++ ret = clk_prepare_enable(dsi->pll_phy_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI PLL: %d\n", ret); ++ return; ++ } ++ ++ hs_clock = clk_get_rate(dsi->pll_phy_clock); ++ ++ /* Yes, we set the DSI0P/DSI1P pixel clock to the byte rate, ++ * not the pixel clock rate. DSIxP take from the APHY's byte, ++ * DDR2, or DDR4 clock (we use byte) and feed into the PV at ++ * that rate. Separately, a value derived from PIX_CLK_DIV ++ * and HS_CLKC is fed into the PV to divide down to the actual ++ * pixel clock for pushing pixels into DSI. ++ */ ++ dsip_clock = phy_clock / 8; ++ ret = clk_set_rate(dsi->pixel_clock, dsip_clock); ++ if (ret) { ++ dev_err(dev, "Failed to set pixel clock to %ldHz: %d\n", ++ dsip_clock, ret); ++ } ++ ++ ret = clk_prepare_enable(dsi->pixel_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI pixel clock: %d\n", ret); ++ return; ++ } ++ ++ /* How many ns one DSI unit interval is. Note that the clock ++ * is DDR, so there's an extra divide by 2. ++ */ ++ ui_ns = DIV_ROUND_UP(500000000, hs_clock); ++ ++ DSI_PORT_WRITE(HS_CLT0, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 262, 0), ++ DSI_HS_CLT0_CZERO) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 0, 8), ++ DSI_HS_CLT0_CPRE) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 38, 0), ++ DSI_HS_CLT0_CPREP)); ++ ++ DSI_PORT_WRITE(HS_CLT1, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 0), ++ DSI_HS_CLT1_CTRAIL) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 52), ++ DSI_HS_CLT1_CPOST)); ++ ++ DSI_PORT_WRITE(HS_CLT2, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000000, 0), ++ DSI_HS_CLT2_WUP)); ++ ++ DSI_PORT_WRITE(HS_DLT3, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 100, 0), ++ DSI_HS_DLT3_EXIT) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 105, 6), ++ DSI_HS_DLT3_ZERO) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 40, 4), ++ DSI_HS_DLT3_PRE)); ++ ++ DSI_PORT_WRITE(HS_DLT4, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, lpx * ESC_TIME_NS, 0), ++ DSI_HS_DLT4_LPX) | ++ VC4_SET_FIELD(max(dsi_hs_timing(ui_ns, 0, 8), ++ dsi_hs_timing(ui_ns, 60, 4)), ++ DSI_HS_DLT4_TRAIL) | ++ VC4_SET_FIELD(0, DSI_HS_DLT4_ANLAT)); ++ ++ DSI_PORT_WRITE(HS_DLT5, VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000, 5000), ++ DSI_HS_DLT5_INIT)); ++ ++ DSI_PORT_WRITE(HS_DLT6, ++ VC4_SET_FIELD(lpx * 5, DSI_HS_DLT6_TA_GET) | ++ VC4_SET_FIELD(lpx, DSI_HS_DLT6_TA_SURE) | ++ VC4_SET_FIELD(lpx * 4, DSI_HS_DLT6_TA_GO) | ++ VC4_SET_FIELD(lpx, DSI_HS_DLT6_LP_LPX)); ++ ++ DSI_PORT_WRITE(HS_DLT7, ++ VC4_SET_FIELD(dsi_esc_timing(1000000), ++ DSI_HS_DLT7_LP_WUP)); ++ ++ DSI_PORT_WRITE(PHYC, ++ DSI_PHYC_DLANE0_ENABLE | ++ (dsi->lanes >= 2 ? DSI_PHYC_DLANE1_ENABLE : 0) | ++ (dsi->lanes >= 3 ? DSI_PHYC_DLANE2_ENABLE : 0) | ++ (dsi->lanes >= 4 ? DSI_PHYC_DLANE3_ENABLE : 0) | ++ DSI_PORT_BIT(PHYC_CLANE_ENABLE) | ++ ((dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? ++ 0 : DSI_PORT_BIT(PHYC_HS_CLK_CONTINUOUS)) | ++ (dsi->port == 0 ? ++ VC4_SET_FIELD(lpx - 1, DSI0_PHYC_ESC_CLK_LPDT) : ++ VC4_SET_FIELD(lpx - 1, DSI1_PHYC_ESC_CLK_LPDT))); ++ ++ DSI_PORT_WRITE(CTRL, ++ DSI_PORT_READ(CTRL) | ++ DSI_CTRL_CAL_BYTE); ++ ++ /* HS timeout in HS clock cycles: disabled. */ ++ DSI_PORT_WRITE(HSTX_TO_CNT, 0); ++ /* LP receive timeout in HS clocks. */ ++ DSI_PORT_WRITE(LPRX_TO_CNT, 0xffffff); ++ /* Bus turnaround timeout */ ++ DSI_PORT_WRITE(TA_TO_CNT, 100000); ++ /* Display reset sequence timeout */ ++ DSI_PORT_WRITE(PR_TO_CNT, 100000); ++ ++ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ VC4_SET_FIELD(divider, DSI_DISP0_PIX_CLK_DIV) | ++ VC4_SET_FIELD(format, DSI_DISP0_PFORMAT) | ++ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, ++ DSI_DISP0_LP_STOP_CTRL) | ++ DSI_DISP0_ST_END | ++ DSI_DISP0_ENABLE); ++ } else { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ DSI_DISP0_COMMAND_MODE | ++ DSI_DISP0_ENABLE); ++ } ++ ++ /* Set up DISP1 for transferring long command payloads through ++ * the pixfifo. ++ */ ++ DSI_PORT_WRITE(DISP1_CTRL, ++ VC4_SET_FIELD(DSI_DISP1_PFORMAT_32BIT_LE, ++ DSI_DISP1_PFORMAT) | ++ DSI_DISP1_ENABLE); ++ ++ /* Ungate the block. */ ++ if (dsi->port == 0) ++ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0); ++ else ++ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); ++ ++ /* Bring AFE out of reset. */ ++ if (dsi->port == 0) { ++ } else { ++ DSI_PORT_WRITE(PHY_AFEC0, ++ DSI_PORT_READ(PHY_AFEC0) & ++ ~DSI1_PHY_AFEC0_RESET); ++ } ++ ++ vc4_dsi_ulps(dsi, false); ++ ++ if (debug_dump_regs) { ++ DRM_INFO("DSI regs after:\n"); ++ vc4_dsi_dump_regs(dsi); ++ } ++ ++ ret = drm_panel_enable(dsi->panel); ++ if (ret) { ++ DRM_ERROR("Panel failed to enable\n"); ++ drm_panel_unprepare(dsi->panel); ++ return; ++ } ++} ++ ++static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host, ++ const struct mipi_dsi_msg *msg) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ struct mipi_dsi_packet packet; ++ u32 pkth = 0, pktc = 0; ++ int i, ret; ++ bool is_long = mipi_dsi_packet_format_is_long(msg->type); ++ u32 cmd_fifo_len = 0, pix_fifo_len = 0; ++ ++ mipi_dsi_create_packet(&packet, msg); ++ ++ pkth |= VC4_SET_FIELD(packet.header[0], DSI_TXPKT1H_BC_DT); ++ pkth |= VC4_SET_FIELD(packet.header[1] | ++ (packet.header[2] << 8), ++ DSI_TXPKT1H_BC_PARAM); ++ if (is_long) { ++ /* Divide data across the various FIFOs we have available. ++ * The command FIFO takes byte-oriented data, but is of ++ * limited size. The pixel FIFO (never actually used for ++ * pixel data in reality) is word oriented, and substantially ++ * larger. So, we use the pixel FIFO for most of the data, ++ * sending the residual bytes in the command FIFO at the start. ++ * ++ * With this arrangement, the command FIFO will never get full. ++ */ ++ if (packet.payload_length <= 16) { ++ cmd_fifo_len = packet.payload_length; ++ pix_fifo_len = 0; ++ } else { ++ cmd_fifo_len = (packet.payload_length % ++ DSI_PIX_FIFO_WIDTH); ++ pix_fifo_len = ((packet.payload_length - cmd_fifo_len) / ++ DSI_PIX_FIFO_WIDTH); ++ } ++ ++ WARN_ON_ONCE(pix_fifo_len >= DSI_PIX_FIFO_DEPTH); ++ ++ pkth |= VC4_SET_FIELD(cmd_fifo_len, DSI_TXPKT1H_BC_CMDFIFO); ++ } ++ ++ if (msg->rx_len) { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_RX, ++ DSI_TXPKT1C_CMD_CTRL); ++ } else { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_TX, ++ DSI_TXPKT1C_CMD_CTRL); ++ } ++ ++ for (i = 0; i < cmd_fifo_len; i++) ++ DSI_PORT_WRITE(TXPKT_CMD_FIFO, packet.payload[i]); ++ for (i = 0; i < pix_fifo_len; i++) { ++ const u8 *pix = packet.payload + cmd_fifo_len + i * 4; ++ ++ DSI_PORT_WRITE(TXPKT_PIX_FIFO, ++ pix[0] | ++ pix[1] << 8 | ++ pix[2] << 16 | ++ pix[3] << 24); ++ } ++ ++ if (msg->flags & MIPI_DSI_MSG_USE_LPM) ++ pktc |= DSI_TXPKT1C_CMD_MODE_LP; ++ if (is_long) ++ pktc |= DSI_TXPKT1C_CMD_TYPE_LONG; ++ ++ /* Send one copy of the packet. Larger repeats are used for pixel ++ * data in command mode. ++ */ ++ pktc |= VC4_SET_FIELD(1, DSI_TXPKT1C_CMD_REPEAT); ++ ++ pktc |= DSI_TXPKT1C_CMD_EN; ++ if (pix_fifo_len) { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SECONDARY, ++ DSI_TXPKT1C_DISPLAY_NO); ++ } else { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SHORT, ++ DSI_TXPKT1C_DISPLAY_NO); ++ } ++ ++ /* Enable the appropriate interrupt for the transfer completion. */ ++ dsi->xfer_result = 0; ++ reinit_completion(&dsi->xfer_completion); ++ DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); ++ if (msg->rx_len) { ++ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | ++ DSI1_INT_PHY_DIR_RTF)); ++ } else { ++ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | ++ DSI1_INT_TXPKT1_DONE)); ++ } ++ ++ /* Send the packet. */ ++ DSI_PORT_WRITE(TXPKT1H, pkth); ++ DSI_PORT_WRITE(TXPKT1C, pktc); ++ ++ if (!wait_for_completion_timeout(&dsi->xfer_completion, ++ msecs_to_jiffies(1000))) { ++ dev_err(&dsi->pdev->dev, "transfer interrupt wait timeout"); ++ dev_err(&dsi->pdev->dev, "instat: 0x%08x\n", ++ DSI_PORT_READ(INT_STAT)); ++ ret = -ETIMEDOUT; ++ } else { ++ ret = dsi->xfer_result; ++ } ++ ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ ++ if (ret) ++ goto reset_fifo_and_return; ++ ++ if (ret == 0 && msg->rx_len) { ++ u32 rxpkt1h = DSI_PORT_READ(RXPKT1H); ++ u8 *msg_rx = msg->rx_buf; ++ ++ if (rxpkt1h & DSI_RXPKT1H_PKT_TYPE_LONG) { ++ u32 rxlen = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_BC_PARAM); ++ ++ if (rxlen != msg->rx_len) { ++ DRM_ERROR("DSI returned %db, expecting %db\n", ++ rxlen, (int)msg->rx_len); ++ ret = -ENXIO; ++ goto reset_fifo_and_return; ++ } ++ ++ for (i = 0; i < msg->rx_len; i++) ++ msg_rx[i] = DSI_READ(DSI1_RXPKT_FIFO); ++ } else { ++ /* FINISHME: Handle AWER */ ++ ++ msg_rx[0] = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_SHORT_0); ++ if (msg->rx_len > 1) { ++ msg_rx[1] = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_SHORT_1); ++ } ++ } ++ } ++ ++ return ret; ++ ++reset_fifo_and_return: ++ DRM_ERROR("DSI transfer failed, resetting: %d\n", ret); ++ ++ DSI_PORT_WRITE(TXPKT1C, DSI_PORT_READ(TXPKT1C) & ~DSI_TXPKT1C_CMD_EN); ++ udelay(1); ++ DSI_PORT_WRITE(CTRL, ++ DSI_PORT_READ(CTRL) | ++ DSI_PORT_BIT(CTRL_RESET_FIFOS)); ++ ++ DSI_PORT_WRITE(TXPKT1C, 0); ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ return ret; ++} ++ ++static int vc4_dsi_host_attach(struct mipi_dsi_host *host, ++ struct mipi_dsi_device *device) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ int ret = 0; ++ ++ dsi->lanes = device->lanes; ++ dsi->channel = device->channel; ++ dsi->format = device->format; ++ dsi->mode_flags = device->mode_flags; ++ ++ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) { ++ dev_err(&dsi->pdev->dev, ++ "Only VIDEO mode panels supported currently.\n"); ++ return 0; ++ } ++ ++ dsi->panel = of_drm_find_panel(device->dev.of_node); ++ if (!dsi->panel) ++ return 0; ++ ++ ret = drm_panel_attach(dsi->panel, dsi->connector); ++ if (ret != 0) ++ return ret; ++ ++ drm_helper_hpd_irq_event(dsi->connector->dev); ++ ++ return 0; ++} ++ ++static int vc4_dsi_host_detach(struct mipi_dsi_host *host, ++ struct mipi_dsi_device *device) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ ++ if (dsi->panel) { ++ int ret = drm_panel_detach(dsi->panel); ++ ++ if (ret) ++ return ret; ++ ++ dsi->panel = NULL; ++ ++ drm_helper_hpd_irq_event(dsi->connector->dev); ++ } ++ ++ return 0; ++} ++ ++static const struct mipi_dsi_host_ops vc4_dsi_host_ops = { ++ .attach = vc4_dsi_host_attach, ++ .detach = vc4_dsi_host_detach, ++ .transfer = vc4_dsi_host_transfer, ++}; ++ ++static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { ++ .disable = vc4_dsi_encoder_disable, ++ .enable = vc4_dsi_encoder_enable, ++}; ++ ++static const struct of_device_id vc4_dsi_dt_match[] = { ++ { .compatible = "brcm,bcm2835-dsi1", (void *)(uintptr_t)1 }, ++ {} ++}; ++ ++static void dsi_handle_error(struct vc4_dsi *dsi, ++ irqreturn_t *ret, u32 stat, u32 bit, ++ const char *type) ++{ ++ if (!(stat & bit)) ++ return; ++ ++ DRM_ERROR("DSI%d: %s error\n", dsi->port, type); ++ *ret = IRQ_HANDLED; ++} ++ ++static irqreturn_t vc4_dsi_irq_handler(int irq, void *data) ++{ ++ struct vc4_dsi *dsi = data; ++ u32 stat = DSI_PORT_READ(INT_STAT); ++ irqreturn_t ret = IRQ_NONE; ++ ++ DSI_PORT_WRITE(INT_STAT, stat); ++ ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_SYNC_ESC, "LPDT sync"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONTROL, "data lane 0 sequence"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONT_LP0, "LP0 contention"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONT_LP1, "LP1 contention"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_HSTX_TO, "HSTX timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_LPRX_TO, "LPRX timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_TA_TO, "turnaround timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_PR_TO, "peripheral reset timeout"); ++ ++ if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) { ++ complete(&dsi->xfer_completion); ++ ret = IRQ_HANDLED; ++ } else if (stat & DSI1_INT_HSTX_TO) { ++ complete(&dsi->xfer_completion); ++ dsi->xfer_result = -ETIMEDOUT; ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++/** ++ * Exposes clocks generated by the analog PHY that are consumed by ++ * CPRMAN (clk-bcm2835.c). ++ */ ++static int ++vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi) ++{ ++ struct device *dev = &dsi->pdev->dev; ++ const char *parent_name = __clk_get_name(dsi->pll_phy_clock); ++ static const struct { ++ const char *dsi0_name, *dsi1_name; ++ int div; ++ } phy_clocks[] = { ++ { "dsi0_byte", "dsi1_byte", 8 }, ++ { "dsi0_ddr2", "dsi1_ddr2", 4 }, ++ { "dsi0_ddr", "dsi1_ddr", 2 }, ++ }; ++ int i; ++ ++ dsi->clk_onecell.clk_num = ARRAY_SIZE(phy_clocks); ++ dsi->clk_onecell.clks = devm_kcalloc(dev, ++ dsi->clk_onecell.clk_num, ++ sizeof(*dsi->clk_onecell.clks), ++ GFP_KERNEL); ++ if (!dsi->clk_onecell.clks) ++ return -ENOMEM; ++ ++ for (i = 0; i < ARRAY_SIZE(phy_clocks); i++) { ++ struct clk_fixed_factor *fix = &dsi->phy_clocks[i]; ++ struct clk_init_data init; ++ struct clk *clk; ++ ++ /* We just use core fixed factor clock ops for the PHY ++ * clocks. The clocks are actually gated by the ++ * PHY_AFEC0_DDRCLK_EN bits, which we should be ++ * setting if we use the DDR/DDR2 clocks. However, ++ * vc4_dsi_encoder_enable() is setting up both AFEC0, ++ * setting both our parent DSI PLL's rate and this ++ * clock's rate, so it knows if DDR/DDR2 are going to ++ * be used and could enable the gates itself. ++ */ ++ fix->mult = 1; ++ fix->div = phy_clocks[i].div; ++ fix->hw.init = &init; ++ ++ memset(&init, 0, sizeof(init)); ++ init.parent_names = &parent_name; ++ init.num_parents = 1; ++ if (dsi->port == 1) ++ init.name = phy_clocks[i].dsi1_name; ++ else ++ init.name = phy_clocks[i].dsi0_name; ++ init.ops = &clk_fixed_factor_ops; ++ init.flags = CLK_IS_BASIC; ++ ++ clk = devm_clk_register(dev, &fix->hw); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ dsi->clk_onecell.clks[i] = clk; ++ } ++ ++ return of_clk_add_provider(dev->of_node, ++ of_clk_src_onecell_get, ++ &dsi->clk_onecell); ++} ++ ++static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_dsi *dsi; ++ struct vc4_dsi_encoder *vc4_dsi_encoder; ++ const struct of_device_id *match; ++ dma_cap_mask_t dma_mask; ++ int ret; ++ ++ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); ++ if (!dsi) ++ return -ENOMEM; ++ ++ match = of_match_device(vc4_dsi_dt_match, dev); ++ if (!match) ++ return -ENODEV; ++ ++ dsi->port = (uintptr_t)match->data; ++ ++ vc4_dsi_encoder = devm_kzalloc(dev, sizeof(*vc4_dsi_encoder), ++ GFP_KERNEL); ++ if (!vc4_dsi_encoder) ++ return -ENOMEM; ++ vc4_dsi_encoder->base.type = VC4_ENCODER_TYPE_DSI1; ++ vc4_dsi_encoder->dsi = dsi; ++ dsi->encoder = &vc4_dsi_encoder->base.base; ++ ++ dsi->pdev = pdev; ++ dsi->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(dsi->regs)) ++ return PTR_ERR(dsi->regs); ++ ++ if (DSI_PORT_READ(ID) != DSI_ID_VALUE) { ++ dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n", ++ DSI_PORT_READ(ID), DSI_ID_VALUE); ++ return -ENODEV; ++ } ++ ++ /* DSI1 has a broken AXI slave that doesn't respond to writes ++ * from the ARM. It does handle writes from the DMA engine, ++ * so set up a channel for talking to it. ++ */ ++ if (dsi->port == 1) { ++ dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, ++ &dsi->reg_dma_paddr, ++ GFP_KERNEL); ++ if (!dsi->reg_dma_mem) { ++ DRM_ERROR("Failed to get DMA memory\n"); ++ return -ENOMEM; ++ } ++ ++ dma_cap_zero(dma_mask); ++ dma_cap_set(DMA_MEMCPY, dma_mask); ++ dsi->reg_dma_chan = dma_request_chan_by_mask(&dma_mask); ++ if (IS_ERR(dsi->reg_dma_chan)) { ++ ret = PTR_ERR(dsi->reg_dma_chan); ++ if (ret != -EPROBE_DEFER) ++ DRM_ERROR("Failed to get DMA channel: %d\n", ++ ret); ++ return ret; ++ } ++ ++ /* Get the physical address of the device's registers. The ++ * struct resource for the regs gives us the bus address ++ * instead. ++ */ ++ dsi->reg_paddr = be32_to_cpup(of_get_address(dev->of_node, ++ 0, NULL, NULL)); ++ } ++ ++ init_completion(&dsi->xfer_completion); ++ /* At startup enable error-reporting interrupts and nothing else. */ ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ /* Clear any existing interrupt state. */ ++ DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT)); ++ ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_dsi_irq_handler, 0, "vc4 dsi", dsi); ++ if (ret) { ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get interrupt: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->escape_clock = devm_clk_get(dev, "escape"); ++ if (IS_ERR(dsi->escape_clock)) { ++ ret = PTR_ERR(dsi->escape_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get escape clock: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->pll_phy_clock = devm_clk_get(dev, "phy"); ++ if (IS_ERR(dsi->pll_phy_clock)) { ++ ret = PTR_ERR(dsi->pll_phy_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get phy clock: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->pixel_clock = devm_clk_get(dev, "pixel"); ++ if (IS_ERR(dsi->pixel_clock)) { ++ ret = PTR_ERR(dsi->pixel_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get pixel clock: %d\n", ret); ++ return ret; ++ } ++ ++ /* The esc clock rate is supposed to always be 100Mhz. */ ++ ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); ++ if (ret) { ++ dev_err(dev, "Failed to set esc clock: %d\n", ret); ++ return ret; ++ } ++ ++ ret = vc4_dsi_init_phy_clocks(dsi); ++ if (ret) ++ return ret; ++ ++ if (dsi->port == 1) ++ vc4->dsi1 = dsi; ++ ++ drm_encoder_init(drm, dsi->encoder, &vc4_dsi_encoder_funcs, ++ DRM_MODE_ENCODER_DSI, NULL); ++ drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); ++ ++ dsi->connector = vc4_dsi_connector_init(drm, dsi); ++ if (IS_ERR(dsi->connector)) { ++ ret = PTR_ERR(dsi->connector); ++ goto err_destroy_encoder; ++ } ++ ++ dsi->dsi_host.ops = &vc4_dsi_host_ops; ++ dsi->dsi_host.dev = dev; ++ ++ mipi_dsi_host_register(&dsi->dsi_host); ++ ++ dev_set_drvdata(dev, dsi); ++ ++ pm_runtime_enable(dev); ++ ++ return 0; ++ ++err_destroy_encoder: ++ vc4_dsi_encoder_destroy(dsi->encoder); ++ ++ return ret; ++} ++ ++static void vc4_dsi_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_dsi *dsi = dev_get_drvdata(dev); ++ ++ pm_runtime_disable(dev); ++ ++ vc4_dsi_connector_destroy(dsi->connector); ++ vc4_dsi_encoder_destroy(dsi->encoder); ++ ++ mipi_dsi_host_unregister(&dsi->dsi_host); ++ ++ clk_disable_unprepare(dsi->pll_phy_clock); ++ clk_disable_unprepare(dsi->escape_clock); ++ ++ if (dsi->port == 1) ++ vc4->dsi1 = NULL; ++} ++ ++static const struct component_ops vc4_dsi_ops = { ++ .bind = vc4_dsi_bind, ++ .unbind = vc4_dsi_unbind, ++}; ++ ++static int vc4_dsi_dev_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_dsi_ops); ++} ++ ++static int vc4_dsi_dev_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_dsi_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_dsi_driver = { ++ .probe = vc4_dsi_dev_probe, ++ .remove = vc4_dsi_dev_remove, ++ .driver = { ++ .name = "vc4_dsi", ++ .of_match_table = vc4_dsi_dt_match, ++ }, ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1173_7a58f2eba938383be1612ca473573ef5f6cbb9f8.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1173_7a58f2eba938383be1612ca473573ef5f6cbb9f8.patch --- linux-4.9.13/debian/patches/rpi/rpi_1173_7a58f2eba938383be1612ca473573ef5f6cbb9f8.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1173_7a58f2eba938383be1612ca473573ef5f6cbb9f8.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,31 @@ +commit 7a58f2eba938383be1612ca473573ef5f6cbb9f8 +Author: Boris Brezillon +Date: Fri Dec 2 14:48:12 2016 +0100 + + ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi + + Add the VEC (Video EnCoder) node definition in bcm283x.dtsi. + + Signed-off-by: Boris Brezillon + Signed-off-by: Eric Anholt + (cherry picked from commit b899c45208d6f204a6da9a1132577993eeecf0fb) + +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 41776b97b4b6..d3cc586661f9 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -310,6 +310,14 @@ + status = "disabled"; + }; + ++ vec: vec@7e806000 { ++ compatible = "brcm,bcm2835-vec"; ++ reg = <0x7e806000 0x1000>; ++ clocks = <&clocks BCM2835_CLOCK_VEC>; ++ interrupts = <2 27>; ++ status = "disabled"; ++ }; ++ + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1174_6bfc601edd42ff66b750c622c55e6e651b0c7b76.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1174_6bfc601edd42ff66b750c622c55e6e651b0c7b76.patch --- linux-4.9.13/debian/patches/rpi/rpi_1174_6bfc601edd42ff66b750c622c55e6e651b0c7b76.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1174_6bfc601edd42ff66b750c622c55e6e651b0c7b76.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,25 @@ +commit 6bfc601edd42ff66b750c622c55e6e651b0c7b76 +Author: Boris Brezillon +Date: Fri Dec 2 14:48:13 2016 +0100 + + ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards + + Enable the VEC IP on all RaspberryPi boards. + + Signed-off-by: Boris Brezillon + Signed-off-by: Eric Anholt + (cherry picked from commit 5ab1a37c6027c114a87a1ae32cfc5ef303d643c5) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 365648898f3a..d4577a51e678 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -92,3 +92,8 @@ + &dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; + }; ++ ++&vec { ++ power-domains = <&power RPI_POWER_DOMAIN_VEC>; ++ status = "okay"; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1175_62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1175_62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3.patch --- linux-4.9.13/debian/patches/rpi/rpi_1175_62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1175_62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,38 @@ +commit 62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3 +Author: Eric Anholt +Date: Mon Jan 23 11:41:54 2017 -0800 + + BCM270X: Disable VEC unless vc4-kms-v3d is present. + + Signed-off-by: Eric Anholt + +diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi +index 46cf8602c3b9..1f5f40b9c7cb 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -107,3 +107,7 @@ + &usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; + }; ++ ++&vec { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +index f25cd9a39368..a8ef8c905166 100644 +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -148,6 +148,13 @@ + }; + }; + ++ fragment@18 { ++ target = <&vec>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1176_591a1185da7d0044d0a35cb8c59aa8966b86b577.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1176_591a1185da7d0044d0a35cb8c59aa8966b86b577.patch --- linux-4.9.13/debian/patches/rpi/rpi_1176_591a1185da7d0044d0a35cb8c59aa8966b86b577.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1176_591a1185da7d0044d0a35cb8c59aa8966b86b577.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,24 @@ +commit 591a1185da7d0044d0a35cb8c59aa8966b86b577 +Author: Eric Anholt +Date: Wed Feb 1 17:09:18 2017 -0800 + + drm/vc4: Name the primary and cursor planes in fkms. + + This makes debugging nicer, compared to trying to remember what the + IDs are. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_firmware_kms.c b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +index d18a1dae51a2..e49ce68b607a 100644 +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -267,7 +267,7 @@ static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, + primary ? &xrgb8888 : &argb8888, 1, +- type, NULL); ++ type, primary ? "primary" : "cursor"); + + if (type == DRM_PLANE_TYPE_PRIMARY) { + vc4_plane->fbinfo = diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1177_a7f19907c158c0f2abf7cb3fd28161c8192d5cf2.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1177_a7f19907c158c0f2abf7cb3fd28161c8192d5cf2.patch --- linux-4.9.13/debian/patches/rpi/rpi_1177_a7f19907c158c0f2abf7cb3fd28161c8192d5cf2.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1177_a7f19907c158c0f2abf7cb3fd28161c8192d5cf2.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,69 @@ +commit a7f19907c158c0f2abf7cb3fd28161c8192d5cf2 +Author: Eric Anholt +Date: Wed Feb 1 17:10:09 2017 -0800 + + drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms. + + Trying to debug weston on fkms involved figuring out what calls I was + making to the firmware. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_firmware_kms.c b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +index e49ce68b607a..dbf065677202 100644 +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -102,6 +102,11 @@ static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); + + u32 packet = blank; ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", ++ plane->base.id, plane->name, ++ blank ? "blank" : "unblank"); ++ + return rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_FRAMEBUFFER_BLANK, + &packet, sizeof(packet)); +@@ -149,6 +154,16 @@ static void vc4_primary_plane_atomic_update(struct drm_plane *plane, + WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); + } + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ bpp, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_transaction(vc4->firmware, + RPI_FIRMWARE_CHAN_FB, + vc4_plane->fbinfo_bus_addr); +@@ -178,6 +193,15 @@ static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, + WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); + WARN_ON_ONCE(fb->bits_per_pixel != 32); + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, +@@ -200,6 +224,8 @@ static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, + u32 packet_state[] = { false, 0, 0, 0 }; + int ret; + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1178_91de763e575ca97da310963ab3de1ab27e89ac24.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1178_91de763e575ca97da310963ab3de1ab27e89ac24.patch --- linux-4.9.13/debian/patches/rpi/rpi_1178_91de763e575ca97da310963ab3de1ab27e89ac24.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1178_91de763e575ca97da310963ab3de1ab27e89ac24.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,41 @@ +commit 91de763e575ca97da310963ab3de1ab27e89ac24 +Author: Eric Anholt +Date: Thu Feb 2 09:42:18 2017 -0800 + + drm/vc4: Fix sending of page flip completion events in FKMS mode. + + In the rewrite of vc4_crtc.c for fkms, I dropped the part of the + CRTC's atomic flush handler that moved the completion event from the + proposed atomic state change to the CRTC's current state. That meant + that when full screen pageflipping happened (glxgears -fullscreen in + X, compton, por weston), the app would end up blocked firever waiting + to draw its next frame. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_firmware_kms.c b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +index dbf065677202..da818a207bfa 100644 +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -338,6 +338,21 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc, + static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } + } + + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1179_4a74fd401ba99fafa90e867fe6a7b8bac158b73e.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1179_4a74fd401ba99fafa90e867fe6a7b8bac158b73e.patch --- linux-4.9.13/debian/patches/rpi/rpi_1179_4a74fd401ba99fafa90e867fe6a7b8bac158b73e.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1179_4a74fd401ba99fafa90e867fe6a7b8bac158b73e.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,52 @@ +commit 4a74fd401ba99fafa90e867fe6a7b8bac158b73e +Author: Eric Anholt +Date: Wed Feb 8 15:00:54 2017 -0800 + + drm/vc4: Fulfill user BO creation requests from the kernel BO cache. + + The from_cache flag was actually "the BO is invisible to userspace", + so we can repurpose to just zero out a cached BO and return it to + userspace. + + Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by + -1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that + appeared to be other system noise) + + Note that there's an intel-gpu-tools test to check for the proper + zeroing behavior here, which we continue to pass. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c +index 3f6704cf6608..5ec14f25625d 100644 +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -208,21 +208,22 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size) + } + + struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t unaligned_size, +- bool from_cache) ++ bool allow_unzeroed) + { + size_t size = roundup(unaligned_size, PAGE_SIZE); + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_gem_cma_object *cma_obj; ++ struct vc4_bo *bo; + + if (size == 0) + return ERR_PTR(-EINVAL); + + /* First, try to get a vc4_bo from the kernel BO cache. */ +- if (from_cache) { +- struct vc4_bo *bo = vc4_bo_get_from_cache(dev, size); +- +- if (bo) +- return bo; ++ bo = vc4_bo_get_from_cache(dev, size); ++ if (bo) { ++ if (!allow_unzeroed) ++ memset(bo->base.vaddr, 0, bo->base.base.size); ++ return bo; + } + + cma_obj = drm_gem_cma_create(dev, size); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1180_371b19cf9322eb7bfe37815aee836fb767168622.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1180_371b19cf9322eb7bfe37815aee836fb767168622.patch --- linux-4.9.13/debian/patches/rpi/rpi_1180_371b19cf9322eb7bfe37815aee836fb767168622.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1180_371b19cf9322eb7bfe37815aee836fb767168622.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,33 @@ +commit 371b19cf9322eb7bfe37815aee836fb767168622 +Author: Eric Anholt +Date: Thu Feb 9 09:23:34 2017 -0800 + + drm/vc4: Fix OOPSes from trying to cache a partially constructed BO. + + If a CMA allocation failed, the partially constructed BO would be + unreferenced through the normal path, and we might choose to put it in + the BO cache. If we then reused it before it expired from the cache, + the kernel would OOPS. + + Signed-off-by: Eric Anholt + Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") + +diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c +index 5ec14f25625d..fd83a2807656 100644 +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -314,6 +314,14 @@ void vc4_free_object(struct drm_gem_object *gem_bo) + goto out; + } + ++ /* If this object was partially constructed but CMA allocation ++ * had failed, just free it. ++ */ ++ if (!bo->base.vaddr) { ++ vc4_bo_destroy(bo); ++ goto out; ++ } ++ + cache_list = vc4_get_cache_list_for_size(dev, gem_bo->size); + if (!cache_list) { + vc4_bo_destroy(bo); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1181_9e528a51375e18d52d47e0fd46f1ba0dd0c41457.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1181_9e528a51375e18d52d47e0fd46f1ba0dd0c41457.patch --- linux-4.9.13/debian/patches/rpi/rpi_1181_9e528a51375e18d52d47e0fd46f1ba0dd0c41457.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1181_9e528a51375e18d52d47e0fd46f1ba0dd0c41457.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,80 @@ +commit 9e528a51375e18d52d47e0fd46f1ba0dd0c41457 +Author: Eric Anholt +Date: Mon Oct 12 08:58:08 2015 -0700 + + drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary. + + I've seen lots of users cranking CMA up higher, so throw an error if + they do. + + Signed-off-by: Eric Anholt + +diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c +index e167a1e1bccb..60f5c2591ccd 100644 +--- a/drivers/base/dma-contiguous.c ++++ b/drivers/base/dma-contiguous.c +@@ -35,6 +35,7 @@ + #endif + + struct cma *dma_contiguous_default_area; ++EXPORT_SYMBOL(dma_contiguous_default_area); + + /* + * Default global CMA area size can be defined in kernel's .config. +diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c +index 7cc346ad9b0b..1d9e5a6edd22 100644 +--- a/drivers/gpu/drm/vc4/vc4_v3d.c ++++ b/drivers/gpu/drm/vc4/vc4_v3d.c +@@ -16,7 +16,10 @@ + * this program. If not, see . + */ + ++#include "linux/init.h" ++#include "linux/cma.h" + #include "linux/component.h" ++#include "linux/dma-contiguous.h" + #include "linux/pm_runtime.h" + #include "vc4_drv.h" + #include "vc4_regs.h" +@@ -185,8 +188,23 @@ static int vc4_v3d_bind(struct device *dev, struct device *master, void *data) + struct drm_device *drm = dev_get_drvdata(master); + struct vc4_dev *vc4 = to_vc4_dev(drm); + struct vc4_v3d *v3d = NULL; ++ struct cma *cma; + int ret; + ++ cma = dev_get_cma_area(dev); ++ if (!cma) ++ return -EINVAL; ++ ++ if ((cma_get_base(cma) & 0xf0000000) != ++ ((cma_get_base(cma) + cma_get_size(cma) - 1) & 0xf0000000)) { ++ DRM_ERROR("V3D requires that the CMA area (0x%08lx - 0x%08lx) " ++ "not span a 256MB boundary, or memory corruption " ++ "would happen.\n", ++ (long)cma_get_base(cma), ++ cma_get_base(cma) + cma_get_size(cma)); ++ return -EINVAL; ++ } ++ + v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL); + if (!v3d) + return -ENOMEM; +diff --git a/mm/cma.c b/mm/cma.c +index c960459eda7e..b50245282a18 100644 +--- a/mm/cma.c ++++ b/mm/cma.c +@@ -47,11 +47,13 @@ phys_addr_t cma_get_base(const struct cma *cma) + { + return PFN_PHYS(cma->base_pfn); + } ++EXPORT_SYMBOL(cma_get_base); + + unsigned long cma_get_size(const struct cma *cma) + { + return cma->count << PAGE_SHIFT; + } ++EXPORT_SYMBOL(cma_get_size); + + static unsigned long cma_bitmap_aligned_mask(const struct cma *cma, + int align_order) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1182_7cce460435cacd304bcdfde1b641b3e4aaa4be29.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1182_7cce460435cacd304bcdfde1b641b3e4aaa4be29.patch --- linux-4.9.13/debian/patches/rpi/rpi_1182_7cce460435cacd304bcdfde1b641b3e4aaa4be29.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1182_7cce460435cacd304bcdfde1b641b3e4aaa4be29.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,60 @@ +commit 7cce460435cacd304bcdfde1b641b3e4aaa4be29 +Author: Phil Elwell +Date: Fri Feb 17 09:47:11 2017 +0000 + + BCM270X_DT: Add SMSC ethernet controller to DT + + With an ethernet node in the DT, a suitable firmware can populate the + local-mac-address property, removing the need for a downstream patch + to the driver to read its MAC address from a module parameter. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +index 51f575e5d201..08bf838fab55 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi Model B+"; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts +index 028ef91a6c4f..4e6b4dd6a8d9 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" + + / { + model = "Raspberry Pi Model B"; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +index a4ffeff9fda6..2dc0e1204e63 100644 +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2709.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi 2 Model B"; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +index d29ba72de727..781018494416 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -5,6 +5,7 @@ + #endif + + #include "bcm2710.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi 3 Model B"; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1183_d520b647a7f0f7fed8bab5377ccaf65386604a94.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1183_d520b647a7f0f7fed8bab5377ccaf65386604a94.patch --- linux-4.9.13/debian/patches/rpi/rpi_1183_d520b647a7f0f7fed8bab5377ccaf65386604a94.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1183_d520b647a7f0f7fed8bab5377ccaf65386604a94.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,38 @@ +commit d520b647a7f0f7fed8bab5377ccaf65386604a94 +Author: Phil Elwell +Date: Fri Feb 17 15:26:13 2017 +0000 + + brcmfmac: Mute expected startup 'errors' + + The brcmfmac WiFi driver always complains about the '00' country code + and the firmware version is reported as an error. Modify the driver to + ignore '00' silently and display firmware version at INFO level. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +index 3fcb1887b2d3..e2a459f7a200 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -6804,6 +6804,8 @@ static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy, + /* ignore non-ISO3166 country codes */ + for (i = 0; i < sizeof(req->alpha2); i++) + if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') { ++ if (req->alpha2[0] == '0' && req->alpha2[1] == '0') ++ return; + brcmf_err("not a ISO3166 code (0x%02x 0x%02x)\n", + req->alpha2[0], req->alpha2[1]); + return; +diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +index 4051780f64f4..b081673abcb4 100644 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -161,7 +161,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) + strsep(&ptr, "\n"); + + /* Print fw version info */ +- brcmf_err("Firmware version = %s\n", buf); ++ pr_info("Firmware version = %s\n", buf); + + /* locate firmware version number for ethtool */ + ptr = strrchr(buf, ' ') + 1; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1184_524e172891286f0db2a96a59d5e8a74bd5f8bd81.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1184_524e172891286f0db2a96a59d5e8a74bd5f8bd81.patch --- linux-4.9.13/debian/patches/rpi/rpi_1184_524e172891286f0db2a96a59d5e8a74bd5f8bd81.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1184_524e172891286f0db2a96a59d5e8a74bd5f8bd81.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,28 @@ +commit 524e172891286f0db2a96a59d5e8a74bd5f8bd81 +Author: Phil Elwell +Date: Mon Feb 13 17:20:08 2017 +0000 + + clk-bcm2835: Mark used PLLs and dividers CRITICAL + + The VPU configures and relies on several PLLs and dividers. Mark all + enabled dividers and their PLLs as CRITICAL to prevent the kernel from + switching them off. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 136e5d28f9ea..4192863778c8 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1366,6 +1366,11 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman, + divider->div.hw.init = &init; + divider->div.table = NULL; + ++ if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { ++ init.flags |= CLK_IS_CRITICAL; ++ divider->div.flags |= CLK_IS_CRITICAL; ++ } ++ + divider->cprman = cprman; + divider->data = data; + diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1185_510304a7e80aa75d966d2e1e005478712aa27d58.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1185_510304a7e80aa75d966d2e1e005478712aa27d58.patch --- linux-4.9.13/debian/patches/rpi/rpi_1185_510304a7e80aa75d966d2e1e005478712aa27d58.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1185_510304a7e80aa75d966d2e1e005478712aa27d58.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,134 @@ +commit 510304a7e80aa75d966d2e1e005478712aa27d58 +Author: Phil Elwell +Date: Mon Feb 13 17:20:08 2017 +0000 + + clk-bcm2835: Add claim-clocks property + + The claim-clocks property can be used to prevent PLLs and dividers + from being marked as critical. It contains a vector of clock IDs, + as defined by dt-bindings/clock/bcm2835.h. + + Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and + PLLH_PIX for the vc4_kms_v3d driver. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +index a8ef8c905166..c57e795824e9 100644 +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -5,6 +5,8 @@ + /dts-v1/; + /plugin/; + ++#include ++ + / { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + +@@ -155,6 +157,18 @@ + }; + }; + ++ fragment@19 { ++ target = <&clocks>; ++ __overlay__ { ++ claim-clocks = < ++ BCM2835_PLLD_DSI0 ++ BCM2835_PLLD_DSI1 ++ BCM2835_PLLH_AUX ++ BCM2835_PLLH_PIX ++ >; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 4192863778c8..6b245357e4e9 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1298,6 +1298,8 @@ static const struct clk_ops bcm2835_vpu_clock_clk_ops = { + .debug_init = bcm2835_clock_debug_init, + }; + ++static bool bcm2835_clk_is_claimed(const char *name); ++ + static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, + const struct bcm2835_pll_data *data) + { +@@ -1314,6 +1316,9 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, + init.ops = &bcm2835_pll_clk_ops; + init.flags = CLK_IGNORE_UNUSED; + ++ if (!bcm2835_clk_is_claimed(data->name)) ++ init.flags |= CLK_IS_CRITICAL; ++ + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return NULL; +@@ -1367,8 +1372,10 @@ bcm2835_register_pll_divider(struct bcm2835_cprman *cprman, + divider->div.table = NULL; + + if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { +- init.flags |= CLK_IS_CRITICAL; +- divider->div.flags |= CLK_IS_CRITICAL; ++ if (!bcm2835_clk_is_claimed(data->source_pll)) ++ init.flags |= CLK_IS_CRITICAL; ++ if (!bcm2835_clk_is_claimed(data->name)) ++ divider->div.flags |= CLK_IS_CRITICAL; + } + + divider->cprman = cprman; +@@ -2104,6 +2111,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { + .ctl_reg = CM_PERIICTL), + }; + ++static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)]; ++ + /* + * Permanently take a reference on the parent of the SDRAM clock. + * +@@ -2123,6 +2132,19 @@ static int bcm2835_mark_sdc_parent_critical(struct clk *sdc) + return clk_prepare_enable(parent); + } + ++static bool bcm2835_clk_is_claimed(const char *name) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) { ++ const char *clk_name = *(const char **)(clk_desc_array[i].data); ++ if (!strcmp(name, clk_name)) ++ return bcm2835_clk_claimed[i]; ++ } ++ ++ return false; ++} ++ + static int bcm2835_clk_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +@@ -2132,6 +2154,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + const struct bcm2835_clk_desc *desc; + const size_t asize = ARRAY_SIZE(clk_desc_array); + size_t i; ++ u32 clk_id; + int ret; + + cprman = devm_kzalloc(dev, sizeof(*cprman) + +@@ -2147,6 +2170,13 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + ++ memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed)); ++ for (i = 0; ++ !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks", ++ i, &clk_id); ++ i++) ++ bcm2835_clk_claimed[clk_id]= true; ++ + memcpy(cprman->real_parent_names, cprman_parent_names, + sizeof(cprman_parent_names)); + of_clk_parent_fill(dev->of_node, cprman->real_parent_names, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1186_39024402e36c59b392d76c6d0be7e0303b95666a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1186_39024402e36c59b392d76c6d0be7e0303b95666a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1186_39024402e36c59b392d76c6d0be7e0303b95666a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1186_39024402e36c59b392d76c6d0be7e0303b95666a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,39 @@ +commit 39024402e36c59b392d76c6d0be7e0303b95666a +Author: Matthias Reichl +Date: Mon Feb 20 20:01:16 2017 +0100 + + dmaengine: bcm2835: Fix cyclic DMA period splitting + + The code responsible for splitting periods into chunks that + can be handled by the DMA controller missed to update total_len, + the number of bytes processed in the current period, when there + are more chunks to follow. + + Therefore total_len was stuck at 0 and the code didn't work at all. + This resulted in a wrong control block layout and audio issues because + the cyclic DMA callback wasn't executing on period boundaries. + + Fix this by adding the missing total_len update. + + Signed-off-by: Matthias Reichl + Signed-off-by: Martin Sperl + Tested-by: Clive Messer + Reviewed-by: Eric Anholt + +diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c +index 80d35f760b4a..599c218dc8a7 100644 +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -253,8 +253,11 @@ static void bcm2835_dma_create_cb_set_length( + */ + + /* have we filled in period_length yet? */ +- if (*total_len + control_block->length < period_len) ++ if (*total_len + control_block->length < period_len) { ++ /* update number of bytes in this period so far */ ++ *total_len += control_block->length; + return; ++ } + + /* calculate the length that remains to reach period_length */ + control_block->length = period_len - *total_len; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1187_5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1187_5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1.patch --- linux-4.9.13/debian/patches/rpi/rpi_1187_5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1187_5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,52 @@ +commit 5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1 +Author: Scott Ellis +Date: Thu Feb 23 11:56:20 2017 -0500 + + Add ads1015 driver to config + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 669edd7544d7..f251cf76bb08 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -653,6 +653,7 @@ CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_ADS1015=m + CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y +@@ -833,9 +834,9 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m + CONFIG_DRM_PANEL_SIMPLE=m + CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +-CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y + CONFIG_FB_BCM2708=y +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 9a9cd1cdcb2f..554fed3a4fbf 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -647,6 +647,7 @@ CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_ADS1015=m + CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y +@@ -827,9 +828,9 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m + CONFIG_DRM_PANEL_SIMPLE=m + CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +-CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y + CONFIG_FB_BCM2708=y diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1188_1625d5383bcb43e273b87966d5e13fa310b6de21.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1188_1625d5383bcb43e273b87966d5e13fa310b6de21.patch --- linux-4.9.13/debian/patches/rpi/rpi_1188_1625d5383bcb43e273b87966d5e13fa310b6de21.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1188_1625d5383bcb43e273b87966d5e13fa310b6de21.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,32 @@ +commit 1625d5383bcb43e273b87966d5e13fa310b6de21 +Author: popcornmix +Date: Fri Jan 27 18:49:30 2017 +0000 + + config: add slcan kernel module + + See: https://github.com/raspberrypi/linux/issues/1819 + +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index f251cf76bb08..843d8fdb6cc9 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -361,6 +361,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 554fed3a4fbf..99888182259b 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -357,6 +357,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1189_194e6b177323f0e757b2ce34c51e8721baff8b18.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1189_194e6b177323f0e757b2ce34c51e8721baff8b18.patch --- linux-4.9.13/debian/patches/rpi/rpi_1189_194e6b177323f0e757b2ce34c51e8721baff8b18.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1189_194e6b177323f0e757b2ce34c51e8721baff8b18.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,257 @@ +commit 194e6b177323f0e757b2ce34c51e8721baff8b18 +Author: Miquel +Date: Fri Feb 24 20:51:06 2017 +0100 + + sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT + + Signed-off-by: Miquel Blauw + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 0a7d30cd5730..8856139d0614 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -13,6 +13,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + bmp085_i2c-sensor.dtbo \ + dht11.dtbo \ + dionaudio-loco.dtbo \ ++ dionaudio-loco-v2.dtbo \ + dpi18.dtbo \ + dpi24.dtbo \ + dwc-otg.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 46228fd324fc..c9845ba37018 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -308,6 +308,25 @@ Load: dtoverlay=dionaudio-loco + Params: + + ++Name: dionaudio-loco-v2 ++Info: Configures the Dion Audio LOCO-V2 DAC-AMP ++Load: dtoverlay=dionaudio-loco-v2,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ + Name: dpi18 + Info: Overlay for a generic 18-bit DPI display + This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 843d8fdb6cc9..7d31052cfd1d 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -889,6 +889,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 99888182259b..2abbcad49833 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -883,6 +883,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index 10f6b2017779..ba5cb8eed455 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -133,6 +133,13 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO + help + Say Y or M if you want to add support for Dion Audio LOCO. + ++config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2 ++ tristate "Support for Dion Audio LOCO-V2 DAC-AMP" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5122 ++ help ++ Say Y or M if you want to add support for Dion Audio LOCO-V2. ++ + config SND_BCM2708_SOC_ALLO_PIANO_DAC + tristate "Support for Allo Piano DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 84c2b20ce2e5..4d8adf691021 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -25,6 +25,7 @@ snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o ++snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o + snd-soc-pisound-objs := pisound.o + +@@ -44,5 +45,6 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o ++obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o + obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o +diff --git a/sound/soc/bcm/dionaudio_loco-v2.c b/sound/soc/bcm/dionaudio_loco-v2.c +new file mode 100644 +index 000000000000..a009c4947797 +--- /dev/null ++++ b/sound/soc/bcm/dionaudio_loco-v2.c +@@ -0,0 +1,140 @@ ++/* ++ * ASoC Driver for Dion Audio LOCO-V2 DAC-AMP ++ * ++ * Author: Miquel Blauw ++ * Copyright 2017 ++ * ++ * Based on the software of the RPi-DAC writen by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_rpi_dionaudio_loco_v2_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_dionaudio_loco_v2_hw_params( ++ struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_dionaudio_loco_v2_ops = { ++ .hw_params = snd_rpi_dionaudio_loco_v2_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_dionaudio_loco_v2_dai[] = { ++{ ++ .name = "DionAudio LOCO-V2", ++ .stream_name = "DionAudio LOCO-V2 DAC-AMP", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_dionaudio_loco_v2_ops, ++ .init = snd_rpi_dionaudio_loco_v2_init, ++},}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_dionaudio_loco_v2 = { ++ .name = "Dion Audio LOCO-V2", ++ .dai_link = snd_rpi_dionaudio_loco_v2_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_v2_dai), ++}; ++ ++static int snd_rpi_dionaudio_loco_v2_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_dionaudio_loco_v2.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = ++ &snd_rpi_dionaudio_loco_v2_dai[0]; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "dionaudio,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco_v2); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_dionaudio_loco_v2_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco_v2); ++} ++ ++static const struct of_device_id dionaudio_of_match[] = { ++ { .compatible = "dionaudio,dionaudio-loco-v2", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, dionaudio_of_match); ++ ++static struct platform_driver snd_rpi_dionaudio_loco_v2_driver = { ++ .driver = { ++ .name = "snd-rpi-dionaudio-loco-v2", ++ .owner = THIS_MODULE, ++ .of_match_table = dionaudio_of_match, ++ }, ++ .probe = snd_rpi_dionaudio_loco_v2_probe, ++ .remove = snd_rpi_dionaudio_loco_v2_remove, ++}; ++ ++module_platform_driver(snd_rpi_dionaudio_loco_v2_driver); ++ ++MODULE_AUTHOR("Miquel Blauw "); ++MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO-V2"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1190_1e93eae18d2841dc37abcc458b4931722edbbe0f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1190_1e93eae18d2841dc37abcc458b4931722edbbe0f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1190_1e93eae18d2841dc37abcc458b4931722edbbe0f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1190_1e93eae18d2841dc37abcc458b4931722edbbe0f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,61 @@ +commit 1e93eae18d2841dc37abcc458b4931722edbbe0f +Author: Phil Elwell +Date: Sun Feb 26 01:13:02 2017 +0000 + + SQUASH: Add LOCO-V2 overlay from last commit + +diff --git a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +new file mode 100644 +index 000000000000..a1af93de3011 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +@@ -0,0 +1,49 @@ ++/* ++ * Definitions for Dion Audio LOCO-V2 DAC-AMP ++ * eg. dtoverlay=dionaudio-loco-v2 ++ * ++ * PCM5242 DAC (in software mode) and TPA3255 AMP. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sound>; ++ frag0: __overlay__ { ++ compatible = "dionaudio,dionaudio-loco-v2"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1191_6a747527985a3b4cf45930e905907df70551f6cf.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1191_6a747527985a3b4cf45930e905907df70551f6cf.patch --- linux-4.9.13/debian/patches/rpi/rpi_1191_6a747527985a3b4cf45930e905907df70551f6cf.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1191_6a747527985a3b4cf45930e905907df70551f6cf.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,340 @@ +commit 6a747527985a3b4cf45930e905907df70551f6cf +Author: Fe-Pi +Date: Wed Mar 1 04:42:43 2017 -0700 + + Add support for Fe-Pi audio sound card. (#1867) + + Fe-Pi Audio Sound Card is based on NXP SGTL5000 codec. + Mechanical specification of the board is the same the Raspberry Pi Zero. + 3.5mm jacks for Headphone/Mic, Line In, and Line Out. + + Signed-off-by: Henry Kupis + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index 8856139d0614..c8825365a412 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -20,6 +20,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + dwc2.dtbo \ + enc28j60.dtbo \ + enc28j60-spi2.dtbo \ ++ fe-pi-audio.dtbo \ + gpio-ir.dtbo \ + gpio-poweroff.dtbo \ + hifiberry-amp.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index c9845ba37018..788e9e3b23f3 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -383,6 +383,12 @@ Params: int_pin GPIO used for INT (default 39) + speed SPI bus speed (default 12000000) + + ++Name: fe-pi-audio ++Info: Configures the Fe-Pi Audio Sound Card ++Load: dtoverlay=fe-pi-audio ++Params: ++ ++ + Name: gpio-ir + Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- + based gpio_ir_recv driver maps received keys directly to a +diff --git a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +new file mode 100644 +index 000000000000..81a07ed5a8c7 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +@@ -0,0 +1,70 @@ ++// Definitions for Fe-Pi Audio ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&clocks>; ++ __overlay__ { ++ sgtl5000_mclk: sgtl5000_mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <12288000>; ++ clock-output-names = "sgtl5000-mclk"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&soc>; ++ __overlay__ { ++ reg_1v8: reg_1v8@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "1V8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ sgtl5000@0a { ++ #sound-dai-cells = <0>; ++ compatible = "fepi,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&sgtl5000_mclk>; ++ micbias-resistor-k-ohms = <2>; ++ micbias-voltage-m-volts = <3000>; ++ VDDA-supply = <&vdd_3v3_reg>; ++ VDDIO-supply = <&vdd_3v3_reg>; ++ VDDD-supply = <®_1v8>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "fe-pi,fe-pi-audio"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 7d31052cfd1d..21cac9ebe030 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -891,6 +891,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m + CONFIG_SND_SOC_ADAU7002=m +diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig +index 2abbcad49833..2c124bbfa343 100644 +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -885,6 +885,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m + CONFIG_SND_SOC_ADAU7002=m +diff --git a/sound/soc/bcm/Kconfig b/sound/soc/bcm/Kconfig +index ba5cb8eed455..e626da6007a2 100644 +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -147,6 +147,13 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC + help + Say Y or M if you want to add support for Allo Piano DAC. + ++config SND_BCM2708_SOC_FE_PI_AUDIO ++ tristate "Support for Fe-Pi-Audio" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_SGTL5000 ++ help ++ Say Y or M if you want to add support for Fe-Pi-Audio. ++ + config SND_PISOUND + tristate "Support for Blokas Labs pisound" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +diff --git a/sound/soc/bcm/Makefile b/sound/soc/bcm/Makefile +index 4d8adf691021..8d2d2073dc2c 100644 +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -28,6 +28,7 @@ snd-soc-dionaudio-loco-objs := dionaudio_loco.o + snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o + snd-soc-pisound-objs := pisound.o ++snd-soc-fe-pi-audio-objs := fe-pi-audio.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -48,3 +49,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o + obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o ++obj-$(CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO) += snd-soc-fe-pi-audio.o +diff --git a/sound/soc/bcm/fe-pi-audio.c b/sound/soc/bcm/fe-pi-audio.c +new file mode 100644 +index 000000000000..015b56fd73cc +--- /dev/null ++++ b/sound/soc/bcm/fe-pi-audio.c +@@ -0,0 +1,158 @@ ++/* ++ * ASoC Driver for Fe-Pi Audio Sound Card ++ * ++ * Author: Henry Kupis ++ * Copyright 2016 ++ * based on code by Florian Meier ++ * based on code by Shawn Guo ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/sgtl5000.h" ++ ++static int snd_fe_pi_audio_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_dapm_force_enable_pin(&card->dapm, "LO"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "ADC"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "DAC"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "HP"); ++ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, ++ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); ++ ++ return 0; ++} ++ ++static int snd_fe_pi_audio_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct device *dev = rtd->card->dev; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ int ret; ++ ++ /* Set SGTL5000's SYSCLK */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, 12288000, SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(dev, "could not set codec driver clock params\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++ ++static struct snd_soc_ops snd_fe_pi_audio_ops = { ++ .hw_params = snd_fe_pi_audio_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_fe_pi_audio_dai[] = { ++ { ++ .name = "FE-PI", ++ .stream_name = "Fe-Pi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "sgtl5000", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "sgtl5000.1-000a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_fe_pi_audio_ops, ++ .init = snd_fe_pi_audio_init, ++ }, ++}; ++ ++static const struct snd_soc_dapm_route fe_pi_audio_dapm_routes[] = { ++ {"ADC", NULL, "Mic Bias"}, ++}; ++ ++ ++static struct snd_soc_card fe_pi_audio = { ++ .name = "Fe-Pi Audio", ++ .owner = THIS_MODULE, ++ .dai_link = snd_fe_pi_audio_dai, ++ .num_links = ARRAY_SIZE(snd_fe_pi_audio_dai), ++ ++ .dapm_routes = fe_pi_audio_dapm_routes, ++ .num_dapm_routes = ARRAY_SIZE(fe_pi_audio_dapm_routes), ++}; ++ ++static int snd_fe_pi_audio_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct snd_soc_card *card = &fe_pi_audio; ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_fe_pi_audio_dai[0]; ++ ++ fe_pi_audio.dev = &pdev->dev; ++ ++ i2s_node = of_parse_phandle(np, "i2s-controller", 0); ++ if (!i2s_node) { ++ dev_err(&pdev->dev, "i2s_node phandle missing or invalid\n"); ++ return -EINVAL; ++ } ++ ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ ++ of_node_put(i2s_node); ++ ++ card->dev = &pdev->dev; ++ platform_set_drvdata(pdev, card); ++ ++ ret = snd_soc_register_card(card); ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_fe_pi_audio_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&fe_pi_audio); ++} ++ ++static const struct of_device_id snd_fe_pi_audio_of_match[] = { ++ { .compatible = "fe-pi,fe-pi-audio", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_fe_pi_audio_of_match); ++ ++static struct platform_driver snd_fe_pi_audio_driver = { ++ .driver = { ++ .name = "snd-fe-pi-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_fe_pi_audio_of_match, ++ }, ++ .probe = snd_fe_pi_audio_probe, ++ .remove = snd_fe_pi_audio_remove, ++}; ++ ++module_platform_driver(snd_fe_pi_audio_driver); ++ ++MODULE_AUTHOR("Henry Kupis "); ++MODULE_DESCRIPTION("ASoC Driver for Fe-Pi Audio"); ++MODULE_LICENSE("GPL v2"); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1192_a8e90198fe4842224d1c8e7f845c17bacd7657c2.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1192_a8e90198fe4842224d1c8e7f845c17bacd7657c2.patch --- linux-4.9.13/debian/patches/rpi/rpi_1192_a8e90198fe4842224d1c8e7f845c17bacd7657c2.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1192_a8e90198fe4842224d1c8e7f845c17bacd7657c2.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,160 @@ +commit a8e90198fe4842224d1c8e7f845c17bacd7657c2 +Author: Scott Ellis +Date: Wed Mar 1 07:22:24 2017 -0500 + + Add overlay for ads1115 ADCs (#1864) + +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +index c8825365a412..c890e5ddb0e2 100644 +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -4,6 +4,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + adau1977-adc.dtbo \ + adau7002-simple.dtbo \ + ads1015.dtbo \ ++ ads1115.dtbo \ + ads7846.dtbo \ + akkordion-iqdacplus.dtbo \ + allo-piano-dac-pcm512x-audio.dtbo \ +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +index 788e9e3b23f3..970c9c9b5c74 100644 +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -196,6 +196,28 @@ Params: addr I2C bus address of device. Set based on how the + http://www.ti.com/lit/ds/symlink/ads1015.pdf + + ++Name: ads1115 ++Info: Texas Instruments ADS1115 ADC ++Load: dtoverlay=ads1115,[=] ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=7 sets 860 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (Default 1 sets the ++ full scale of the channel to 4.096 Volts) ++ ++ Channel parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1115.pdf ++ ++ + Name: ads7846 + Info: ADS7846 Touch controller + Load: dtoverlay=ads7846,= +diff --git a/arch/arm/boot/dts/overlays/ads1115-overlay.dts b/arch/arm/boot/dts/overlays/ads1115-overlay.dts +new file mode 100644 +index 000000000000..7c16a1af3172 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts +@@ -0,0 +1,103 @@ ++/* ++ * TI ADS1115 multi-channel ADC overlay ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ ads1115: ads1115 { ++ compatible = "ti,ads1115"; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x48>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_a: channel_a { ++ reg = <4>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_b: channel_b { ++ reg = <5>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_c: channel_c { ++ reg = <6>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_d: channel_d { ++ reg = <7>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ addr = <&ads1115>,"reg:0"; ++ cha_enable = <0>,"=1"; ++ cha_cfg = <&channel_a>,"reg:0"; ++ cha_gain = <&channel_a>,"ti,gain:0"; ++ cha_datarate = <&channel_a>,"ti,datarate:0"; ++ chb_enable = <0>,"=2"; ++ chb_cfg = <&channel_b>,"reg:0"; ++ chb_gain = <&channel_b>,"ti,gain:0"; ++ chb_datarate = <&channel_b>,"ti,datarate:0"; ++ chc_enable = <0>,"=3"; ++ chc_cfg = <&channel_c>,"reg:0"; ++ chc_gain = <&channel_c>,"ti,gain:0"; ++ chc_datarate = <&channel_c>,"ti,datarate:0"; ++ chd_enable = <0>,"=4"; ++ chd_cfg = <&channel_d>,"reg:0"; ++ chd_gain = <&channel_d>,"ti,gain:0"; ++ chd_datarate = <&channel_d>,"ti,datarate:0"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1193_99551f177e0c00af16228bc6d5d5234e72694803.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1193_99551f177e0c00af16228bc6d5d5234e72694803.patch --- linux-4.9.13/debian/patches/rpi/rpi_1193_99551f177e0c00af16228bc6d5d5234e72694803.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1193_99551f177e0c00af16228bc6d5d5234e72694803.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,27 @@ +commit 99551f177e0c00af16228bc6d5d5234e72694803 +Author: Phil Elwell +Date: Wed Mar 1 16:06:53 2017 +0000 + + clk-bcm2835: Correct the prediv logic + + If a clock has the prediv flag set, both the integer and fractional + parts must be scaled when calculating the resulting frequency. + + Signed-off-by: Phil Elwell + +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 6b245357e4e9..8ea29fbc8dc4 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -616,8 +616,10 @@ static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw, + using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & + data->ana->fb_prediv_mask; + +- if (using_prediv) ++ if (using_prediv) { + ndiv *= 2; ++ fdiv *= 2; ++ } + + return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv); + } diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1194_5f5616e1196195f99df7ddc3a398427e254fc48f.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1194_5f5616e1196195f99df7ddc3a398427e254fc48f.patch --- linux-4.9.13/debian/patches/rpi/rpi_1194_5f5616e1196195f99df7ddc3a398427e254fc48f.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1194_5f5616e1196195f99df7ddc3a398427e254fc48f.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,86 @@ +commit 5f5616e1196195f99df7ddc3a398427e254fc48f +Author: Phil Elwell +Date: Wed Mar 1 16:07:39 2017 +0000 + + amba_pl011: Round input clock up + + The UART clock is initialised to be as close to the requested + frequency as possible without exceeding it. Now that there is a + clock manager that returns the actual frequencies, an expected + 48MHz clock is reported as 47999625. If the requested baudrate + == requested clock/16, there is no headroom and the slight + reduction in actual clock rate results in failure. + + Detect cases where it looks like a "round" clock was chosen and + adjust the reported clock to match that "round" value. As the + code comment says: + + /* + * If increasing a clock by less than 0.1% changes it + * from ..999.. to ..000.., round up. + */ + + Signed-off-by: Phil Elwell + +diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c +index 5a11ff833e1f..003a5b0c3029 100644 +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -1646,6 +1646,23 @@ static void pl011_put_poll_char(struct uart_port *port, + + #endif /* CONFIG_CONSOLE_POLL */ + ++unsigned long pl011_clk_round(unsigned long clk) ++{ ++ unsigned long scaler; ++ ++ /* ++ * If increasing a clock by less than 0.1% changes it ++ * from ..999.. to ..000.., round up. ++ */ ++ scaler = 1; ++ while (scaler * 100000 < clk) ++ scaler *= 10; ++ if ((clk + scaler - 1)/scaler % 1000 == 0) ++ clk = (clk/scaler + 1) * scaler; ++ ++ return clk; ++} ++ + static int pl011_hwinit(struct uart_port *port) + { + struct uart_amba_port *uap = +@@ -1662,7 +1679,7 @@ static int pl011_hwinit(struct uart_port *port) + if (retval) + return retval; + +- uap->port.uartclk = clk_get_rate(uap->clk); ++ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); + + /* Clear pending error and receive interrupts */ + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | +@@ -2300,7 +2317,7 @@ static int __init pl011_console_setup(struct console *co, char *options) + plat->init(); + } + +- uap->port.uartclk = clk_get_rate(uap->clk); ++ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); + + if (uap->vendor->fixed_options) { + baud = uap->fixed_baud; +@@ -2372,6 +2389,7 @@ static struct uart_driver amba_reg = { + .cons = AMBA_CONSOLE, + }; + ++#if 0 + static int pl011_probe_dt_alias(int index, struct device *dev) + { + struct device_node *np; +@@ -2403,6 +2421,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev) + + return ret; + } ++#endif + + /* unregisters the driver also if no more ports are left */ + static void pl011_unregister_port(struct uart_amba_port *uap) diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1195_606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1195_606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9.patch --- linux-4.9.13/debian/patches/rpi/rpi_1195_606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1195_606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,87 @@ +commit 606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9 +Author: Dave Stevenson +Date: Mon Feb 13 11:10:50 2017 +0000 + + BCM2835-V4L2: Ensure H264 header bytes get a sensible timestamp + + H264 header come off VC with 0 timestamps, which means they get a + strange timestamp when processed with VC/kernel start times, + particularly if used with the inline header option. + Remember the last frame timestamp and use that if set, or otherwise + use the kernel start time. + + https://github.com/raspberrypi/linux/issues/1836 + + Signed-off-by: Dave Stevenson + +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.c b/drivers/media/platform/bcm2835/bcm2835-camera.c +index 4f03949aecf3..e69731320f4e 100644 +--- a/drivers/media/platform/bcm2835/bcm2835-camera.c ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -356,8 +356,13 @@ static void buffer_cb(struct vchiq_mmal_instance *instance, + } + } else { + if (dev->capture.frame_count) { +- if (dev->capture.vc_start_timestamp != -1 && +- pts != 0) { ++ if (dev->capture.vc_start_timestamp == -1) { ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as current time - %lld", ++ buf->vb.vb2_buf.timestamp); ++ ++ } else if(pts != 0) { + struct timeval timestamp; + s64 runtime_us = pts - + dev->capture.vc_start_timestamp; +@@ -390,10 +395,27 @@ static void buffer_cb(struct vchiq_mmal_instance *instance, + buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + + timestamp.tv_usec * 1000ULL; + } else { +- buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ if (dev->capture.last_timestamp) { ++ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as last timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } ++ else { ++ buf->vb.vb2_buf.timestamp = ++ dev->capture.kernel_start_ts.tv_sec * 1000000000ULL + ++ dev->capture.kernel_start_ts.tv_usec * 1000ULL; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as start timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } + } ++ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer has ts %llu", ++ dev->capture.last_timestamp); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + + if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && +@@ -559,6 +581,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) + "Start time %lld size %d\n", + dev->capture.vc_start_timestamp, parameter_size); + ++ dev->capture.last_timestamp = 0; ++ + v4l2_get_timestamp(&dev->capture.kernel_start_ts); + + /* enable the camera port */ +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.h b/drivers/media/platform/bcm2835/bcm2835-camera.h +index e6aeb7e7e381..7f8a68916a67 100644 +--- a/drivers/media/platform/bcm2835/bcm2835-camera.h ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.h +@@ -93,6 +93,8 @@ struct bm2835_mmal_dev { + s64 vc_start_timestamp; + /* Kernel start timestamp for streaming */ + struct timeval kernel_start_ts; ++ /* Timestamp of last frame */ ++ u64 last_timestamp; + + struct vchiq_mmal_port *port; /* port being used for capture */ + /* camera port being used for capture */ diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1196_f55a8d67d176cd7c29bcb06956006c7b3506206a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1196_f55a8d67d176cd7c29bcb06956006c7b3506206a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1196_f55a8d67d176cd7c29bcb06956006c7b3506206a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1196_f55a8d67d176cd7c29bcb06956006c7b3506206a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,24 @@ +commit f55a8d67d176cd7c29bcb06956006c7b3506206a +Author: Dave Stevenson +Date: Mon Feb 13 13:11:41 2017 +0000 + + BCM2835-V4L2: Correctly denote key frames in encoded data + + Forward MMAL key frame flags to the V4L2 buffers. + + Signed-off-by: Dave Stevenson + +diff --git a/drivers/media/platform/bcm2835/bcm2835-camera.c b/drivers/media/platform/bcm2835/bcm2835-camera.c +index e69731320f4e..6bdec0806126 100644 +--- a/drivers/media/platform/bcm2835/bcm2835-camera.c ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -413,6 +413,9 @@ static void buffer_cb(struct vchiq_mmal_instance *instance, + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; ++ + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Buffer has ts %llu", + dev->capture.last_timestamp); diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1197_0844a339fa1fbfb184f2b3bf071893be9e6c8d0a.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1197_0844a339fa1fbfb184f2b3bf071893be9e6c8d0a.patch --- linux-4.9.13/debian/patches/rpi/rpi_1197_0844a339fa1fbfb184f2b3bf071893be9e6c8d0a.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1197_0844a339fa1fbfb184f2b3bf071893be9e6c8d0a.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,410 @@ +commit 0844a339fa1fbfb184f2b3bf071893be9e6c8d0a +Author: Dave Stevenson +Date: Mon Feb 20 17:01:21 2017 +0000 + + bcm2835-gpio-exp: Driver for GPIO expander via mailbox service + + Pi3 and Compute Module 3 have a GPIO expander that the + VPU communicates with. + There is a mailbox service that now allows control of this + expander, so add a kernel driver that can make use of it. + + Pwr_led node added to device-tree for Pi3. + + Signed-off-by: Dave Stevenson + +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +index 781018494416..173103aaca50 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -96,6 +96,14 @@ + firmware = <&firmware>; + status = "okay"; + }; ++ ++ expgpio: expgpio { ++ compatible = "brcm,bcm2835-expgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; + }; + + &fb { +@@ -163,6 +171,16 @@ + linux,default-trigger = "mmc0"; + gpios = <&virtgpio 0 0>; + }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&expgpio 7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; + }; + + &audio { +@@ -193,6 +211,10 @@ + act_led_activelow = <&act_led>,"gpios:8"; + act_led_trigger = <&act_led>,"linux,default-trigger"; + ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ + audio = <&audio>,"status"; + watchdog = <&watchdog>,"status"; + random = <&random>,"status"; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +index 3ba6e621856c..fe402e84cdda 100644 +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -65,6 +65,14 @@ + firmware = <&firmware>; + status = "okay"; + }; ++ ++ expgpio: expgpio { ++ compatible = "brcm,bcm2835-expgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; + }; + + &fb { +@@ -123,7 +131,7 @@ + }; + + &hdmi { +- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; + }; + + &audio { +diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig +index 21cac9ebe030..0173885ecbbf 100644 +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -625,6 +625,7 @@ CONFIG_PPS=m + CONFIG_PPS_CLIENT_LDISC=m + CONFIG_PPS_CLIENT_GPIO=m + CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_EXP=y + CONFIG_GPIO_BCM_VIRT=y + CONFIG_GPIO_ARIZONA=m + CONFIG_GPIO_STMPE=y +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +index edcb49f9051b..6c92504a7d29 100644 +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -128,6 +128,13 @@ config GPIO_AXP209 + help + Say yes to enable GPIO support for the AXP209 PMIC + ++config GPIO_BCM_EXP ++ bool "Broadcom Exp GPIO" ++ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) ++ help ++ Turn on GPIO support for Broadcom chips using the firmware mailbox ++ to communicate with VideoCore on BCM283x chips. ++ + config GPIO_BCM_KONA + bool "Broadcom Kona GPIO" + depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index cfb8d4bad6b0..8165a63b82a9 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o + obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o + obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o ++obj-$(CONFIG_GPIO_BCM_EXP) += gpio-bcm-exp.o + obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o + obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o +diff --git a/drivers/gpio/gpio-bcm-exp.c b/drivers/gpio/gpio-bcm-exp.c +new file mode 100644 +index 000000000000..681a91492d4c +--- /dev/null ++++ b/drivers/gpio/gpio-bcm-exp.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom expander GPIO driver ++ * ++ * Uses the firmware mailbox service to communicate with the ++ * GPIO expander on the VPU. ++ * ++ * Copyright (C) 2017 Raspberry Pi Trading Ltd. ++ * ++ * Author: Dave Stevenson ++ * Based on gpio-bcm-virt.c by Dom Cobley ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MODULE_NAME "brcmexp-gpio" ++#define NUM_GPIO 8 ++ ++struct brcmexp_gpio { ++ struct gpio_chip gc; ++ struct device *dev; ++ struct rpi_firmware *fw; ++}; ++ ++struct gpio_set_config { ++ u32 gpio, direction, polarity, term_en, term_pull_up, state; ++}; ++ ++struct gpio_get_config { ++ u32 gpio, direction, polarity, term_en, term_pull_up; ++}; ++ ++struct gpio_get_set_state { ++ u32 gpio, state; ++}; ++ ++static int brcmexp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_config get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u config (%d)\n", off, ret); ++ return ret; ++ } ++ return get.polarity; ++} ++ ++static int brcmexp_gpio_dir_in(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_set_config set_in; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ set_in.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set_in.direction = 0; /* Input */ ++ set_in.polarity = brcmexp_gpio_get_polarity(gc, off); ++ /* Retain existing setting */ ++ set_in.term_en = 0; /* termination disabled */ ++ set_in.term_pull_up = 0; /* n/a as termination disabled */ ++ set_in.state = 0; /* n/a as configured as an input */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, ++ &set_in, sizeof(set_in)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u to input (%d)\n", ++ off, ret); ++ return ret; ++ } ++ return 0; ++} ++ ++static int brcmexp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_set_config set_out; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ set_out.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set_out.direction = 1; /* Output */ ++ set_out.polarity = brcmexp_gpio_get_polarity(gc, off); ++ /* Retain existing setting */ ++ set_out.term_en = 0; /* n/a as an output */ ++ set_out.term_pull_up = 0; /* n/a as termination disabled */ ++ set_out.state = val; /* Output state */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, ++ &set_out, sizeof(set_out)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u to output (%d)\n", off, ret); ++ return ret; ++ } ++ return 0; ++} ++ ++static int brcmexp_gpio_get_direction(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_config get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u config (%d)\n", off, ret); ++ return ret; ++ } ++ return get.direction ? GPIOF_DIR_OUT : GPIOF_DIR_IN; ++} ++ ++static int brcmexp_gpio_get(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_set_state get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ get.state = 0; /* storage for returned value */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u state (%d)\n", off, ret); ++ return ret; ++ } ++ return !!get.state; ++} ++ ++static void brcmexp_gpio_set(struct gpio_chip *gc, unsigned int off, int val) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_set_state set; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ off += gpio->gc.base; ++ ++ set.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set.state = val; /* Output state */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE, ++ &set, sizeof(set)); ++ if (ret) ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u state (%d)\n", off, ret); ++} ++ ++static int brcmexp_gpio_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ struct brcmexp_gpio *ucb; ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ucb = devm_kzalloc(dev, sizeof(*ucb), GFP_KERNEL); ++ if (!ucb) ++ return -EINVAL; ++ ++ ucb->fw = fw; ++ ucb->dev = dev; ++ ucb->gc.label = MODULE_NAME; ++ ucb->gc.owner = THIS_MODULE; ++ ucb->gc.of_node = np; ++ ucb->gc.base = 128; ++ ucb->gc.ngpio = NUM_GPIO; ++ ++ ucb->gc.direction_input = brcmexp_gpio_dir_in; ++ ucb->gc.direction_output = brcmexp_gpio_dir_out; ++ ucb->gc.get_direction = brcmexp_gpio_get_direction; ++ ucb->gc.get = brcmexp_gpio_get; ++ ucb->gc.set = brcmexp_gpio_set; ++ ucb->gc.can_sleep = true; ++ ++ err = gpiochip_add(&ucb->gc); ++ if (err) ++ return err; ++ ++ platform_set_drvdata(pdev, ucb); ++ ++ return 0; ++} ++ ++static int brcmexp_gpio_remove(struct platform_device *pdev) ++{ ++ struct brcmexp_gpio *ucb = platform_get_drvdata(pdev); ++ ++ gpiochip_remove(&ucb->gc); ++ ++ return 0; ++} ++ ++static const struct of_device_id __maybe_unused brcmexp_gpio_ids[] = { ++ { .compatible = "brcm,bcm2835-expgpio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, brcmexp_gpio_ids); ++ ++static struct platform_driver brcmexp_gpio_driver = { ++ .driver = { ++ .name = MODULE_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(brcmexp_gpio_ids), ++ }, ++ .probe = brcmexp_gpio_probe, ++ .remove = brcmexp_gpio_remove, ++}; ++module_platform_driver(brcmexp_gpio_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dave Stevenson "); ++MODULE_DESCRIPTION("brcm-exp GPIO driver"); ++MODULE_ALIAS("platform:brcmexp-gpio"); +diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h +index 2859db09e25b..56b3f0fe1ea3 100644 +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -83,7 +83,11 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_TURBO = 0x00038009, + RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, ++ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041, ++ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041, + RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, ++ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043, ++ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, + + /* Dispmanx TAGS */ + RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1198_43c382c981f1e95b9aed432f0529d1ec420bb210.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1198_43c382c981f1e95b9aed432f0529d1ec420bb210.patch --- linux-4.9.13/debian/patches/rpi/rpi_1198_43c382c981f1e95b9aed432f0529d1ec420bb210.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1198_43c382c981f1e95b9aed432f0529d1ec420bb210.patch 2017-03-12 01:46:16.000000000 +0000 @@ -0,0 +1,226 @@ +commit 43c382c981f1e95b9aed432f0529d1ec420bb210 +Author: Phil Elwell +Date: Tue May 24 16:30:05 2016 +0100 + + BCM270X_DT: Add bcm2708-rpi-0-w.dts + + Add DT support for the Pi Zero W. N.B. It will not be loaded + automatically without a corresponding change to the firmware. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index c66a6d6b2491..b6902b6fe837 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-plus.dtb \ + bcm2708-rpi-cm.dtb \ ++ bcm2708-rpi-0-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ + bcm2710-rpi-cm3.dtb +diff --git a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +new file mode 100644 +index 000000000000..db0f99ddf2f4 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -0,0 +1,197 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Zero W"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&random { ++ status = "okay"; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ chosen { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; diff -Nru linux-4.9.13/debian/patches/rpi/rpi_1199_030d289026ab07792cdf6fdb56342a377de4d3bd.patch linux-4.9-4.9.13/debian/patches/rpi/rpi_1199_030d289026ab07792cdf6fdb56342a377de4d3bd.patch --- linux-4.9.13/debian/patches/rpi/rpi_1199_030d289026ab07792cdf6fdb56342a377de4d3bd.patch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/rpi/rpi_1199_030d289026ab07792cdf6fdb56342a377de4d3bd.patch 2017-03-12 01:46:17.000000000 +0000 @@ -0,0 +1,127 @@ +commit 030d289026ab07792cdf6fdb56342a377de4d3bd +Author: Phil Elwell +Date: Mon Mar 6 09:06:18 2017 +0000 + + clk-bcm2835: Read max core clock from firmware + + The VPU is responsible for managing the core clock, usually under + direction from the bcm2835-cpufreq driver but not via the clk-bcm2835 + driver. Since the core frequency can change without warning, it is + safer to report the maximum clock rate to users of the core clock - + I2C, SPI and the mini UART - to err on the safe side when calculating + clock divisors. + + If the DT node for the clock driver includes a reference to the + firmware node, use the firmware API to query the maximum core clock + instead of reading the divider registers. + + Prior to this patch, a "100KHz" I2C bus was sometimes clocked at about + 160KHz. In particular, switching to the 4.9 kernel was likely to break + SenseHAT usage on a Pi3. + + Signed-off-by: Phil Elwell + +diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi +index 1f5f40b9c7cb..72ab7fc673ce 100644 +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -111,3 +111,7 @@ + &vec { + status = "disabled"; + }; ++ ++&clocks { ++ firmware = <&firmware>; ++}; +diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c +index 8ea29fbc8dc4..fe3298b54cdf 100644 +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -45,6 +45,7 @@ + #include + #include + #include ++#include + + #define CM_PASSWORD 0x5a000000 + +@@ -299,6 +300,8 @@ + #define LOCK_TIMEOUT_NS 100000000 + #define BCM2835_MAX_FB_RATE 1750000000u + ++#define VCMSG_ID_CORE_CLOCK 4 ++ + /* + * Names of clocks used within the driver that need to be replaced + * with an external parent's name. This array is in the order that +@@ -317,6 +320,7 @@ static const char *const cprman_parent_names[] = { + struct bcm2835_cprman { + struct device *dev; + void __iomem *regs; ++ struct rpi_firmware *fw; + spinlock_t regs_lock; /* spinlock for all clocks */ + + /* +@@ -1025,6 +1029,30 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, + return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + } + ++static unsigned long bcm2835_clock_get_rate_vpu(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); ++ struct bcm2835_cprman *cprman = clock->cprman; ++ ++ if (cprman->fw) { ++ struct { ++ u32 id; ++ u32 val; ++ } packet; ++ ++ packet.id = VCMSG_ID_CORE_CLOCK; ++ packet.val = 0; ++ ++ if (!rpi_firmware_property(cprman->fw, ++ RPI_FIRMWARE_GET_MAX_CLOCK_RATE, ++ &packet, sizeof(packet))) ++ return packet.val; ++ } ++ ++ return bcm2835_clock_get_rate(hw, parent_rate); ++} ++ + static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock) + { + struct bcm2835_cprman *cprman = clock->cprman; +@@ -1292,7 +1320,7 @@ static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) + */ + static const struct clk_ops bcm2835_vpu_clock_clk_ops = { + .is_prepared = bcm2835_vpu_clock_is_on, +- .recalc_rate = bcm2835_clock_get_rate, ++ .recalc_rate = bcm2835_clock_get_rate_vpu, + .set_rate = bcm2835_clock_set_rate, + .determine_rate = bcm2835_clock_determine_rate, + .set_parent = bcm2835_clock_set_parent, +@@ -2155,6 +2183,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + struct resource *res; + const struct bcm2835_clk_desc *desc; + const size_t asize = ARRAY_SIZE(clk_desc_array); ++ struct device_node *fw_node; + size_t i; + u32 clk_id; + int ret; +@@ -2172,6 +2201,14 @@ static int bcm2835_clk_probe(struct platform_device *pdev) + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + ++ fw_node = of_parse_phandle(dev->of_node, "firmware", 0); ++ if (fw_node) { ++ struct rpi_firmware *fw = rpi_firmware_get(NULL); ++ if (!fw) ++ return -EPROBE_DEFER; ++ cprman->fw = fw; ++ } ++ + memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed)); + for (i = 0; + !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks", diff -Nru linux-4.9.13/debian/patches/series linux-4.9-4.9.13/debian/patches/series --- linux-4.9.13/debian/patches/series 2017-02-27 15:45:39.000000000 +0000 +++ linux-4.9-4.9.13/debian/patches/series 2017-03-12 01:46:17.000000000 +0000 @@ -17,41 +17,34 @@ bugfix/all/firmware_class-log-every-success-and-failure.patch bugfix/all/firmware-remove-redundant-log-messages-from-drivers.patch bugfix/all/radeon-firmware-is-required-for-drm-and-kms-on-r600-onward.patch - # Patches from aufs4 repository, imported with # debian/patches/features/all/aufs4/gen-patch. These are only the # changes needed to allow aufs to be built out-of-tree. features/all/aufs4/aufs4-base.patch features/all/aufs4/aufs4-mmap.patch features/all/aufs4/aufs4-standalone.patch - # Change some defaults for security reasons debian/af_802154-Disable-auto-loading-as-mitigation-against.patch debian/rds-Disable-auto-loading-as-mitigation-against-local.patch debian/decnet-Disable-auto-loading-as-mitigation-against-lo.patch debian/dccp-disable-auto-loading-as-mitigation-against-local-exploits.patch debian/fs-enable-link-security-restrictions-by-default.patch - # Set various features runtime-disabled by default debian/sched-autogroup-disabled.patch debian/yama-disable-by-default.patch debian/add-sysctl-to-disallow-unprivileged-CLONE_NEWUSER-by-default.patch features/all/security-perf-allow-further-restriction-of-perf_event_open.patch - # Disable autoloading/probing of various drivers by default debian/cdc_ncm-cdc_mbim-use-ncm-by-default.patch debian/snd-pcsp-disable-autoload.patch bugfix/x86/viafb-autoload-on-olpc-xo1.5-only.patch - # Taint if dangerous features are used debian/fanotify-taint-on-use-of-fanotify_access_permissions.patch - # Arch bug fixes bugfix/x86/asoc-intel-select-dw_dmac_core-since-it-s-mandatory.patch bugfix/x86/platform-x86-acer-wmi-setup-accelerometer-when-machi.patch bugfix/x86/x86-xen-fix-apic-id-mismatch-warning-on-intel.patch bugfix/arm/arm-dts-kirkwood-fix-sata-pinmux-ing-for-ts419.patch - # Arch features features/mips/MIPS-increase-MAX-PHYSMEM-BITS-on-Loongson-3-only.patch features/mips/MIPS-Loongson-3-Add-Loongson-LS3A-RS780E-1-way-machi.patch @@ -79,9 +72,7 @@ bugfix/all/nbd-fix-64-bit-division.patch bugfix/all/net-ipv6-check-route-protocol-when-deleting-routes.patch bugfix/all/media-dvb-usb-dibusb-mc-common-add-module_license.patch - # Miscellaneous features - # Securelevel patchset from mjg59 features/all/securelevel/add-bsd-style-securelevel-support.patch features/all/securelevel/enforce-module-signatures-when-securelevel-is-greate.patch @@ -105,14 +96,12 @@ # same for arm64 features/all/securelevel/arm64-efi-disable-secure-boot-if-shim-is-in-insecure.patch features/all/securelevel/arm64-add-kernel-config-option-to-set-securelevel-wh.patch - # Security fixes debian/i386-686-pae-pci-set-pci-nobios-by-default.patch bugfix/x86/kvm-fix-page-struct-leak-in-handle_vmon.patch bugfix/all/ipc-shm-fix-shmat-mmap-nil-page-protection.patch debian/time-mark-timer_stats-as-broken.patch bugfix/all/sctp-deny-peeloff-operation-on-asocs-with-threads-sl.patch - # Fix exported symbol versions bugfix/ia64/revert-ia64-move-exports-to-definitions.patch bugfix/sparc/revert-sparc-move-exports-to-definitions.patch @@ -122,10 +111,8 @@ bugfix/powerpc/powerpc-remove-mac-on-linux-hooks.patch bugfix/powerpc/powerpc-fix-missing-crcs-add-yet-more-asm-prototypes.patch bugfix/all/module-disable-matching-missing-version-crc.patch - # ABI maintenance debian/net-avoid-abi-change-for-min_header_len.patch - # Tools bug fixes bugfix/all/usbip-document-tcp-wrappers.patch bugfix/all/kbuild-fix-recordmcount-dependency.patch @@ -149,3 +136,205 @@ bugfix/all/liblockdep-fix-unused-value-warnings.patch bugfix/all/liblockdep-fix-set-but-not-used-warnings.patch bugfix/all/liblockdep-fix-defined-but-not-used-warning-for-init.patch + +rpi/rpi_1000_af7b2569d0e8ab6e685a522f7f078981f4e5cc9c.patch +rpi/rpi_1001_815f9e1fa9e59708218fa64d080d8f46c088889e.patch +rpi/rpi_1002_9444644b16f69fec912a534e5b2379609cc8d02a.patch +rpi/rpi_1003_d3078bd3040aa01758d08993ddc73fc374c5a828.patch +rpi/rpi_1004_12b0a8db8b3e2c588212d5c29fda3014fe2a446f.patch +rpi/rpi_1005_61628076b44e9e2f2ab0c8bf229c3eae52af9fca.patch +rpi/rpi_1006_97fa68ff0087bb3730e06da3b438c164c6eb1794.patch +rpi/rpi_1007_6f35fd019bda4c10d01214821f7a19d4b1d66dbc.patch +rpi/rpi_1008_f32340ecc98314033f6fa6e25f2796f3a2ff7c64.patch +rpi/rpi_1009_42807f1d6308d5e1fac6c41ef99496403e833217.patch +rpi/rpi_1010_9ceb205fb57c04aee6e587746fd0c6fb4234f01a.patch +rpi/rpi_1011_3c73a0ceea4444fac6975fc23197ea5ee95de644.patch +rpi/rpi_1012_3b18e342423104d324e9480a612fb537aecb189c.patch +rpi/rpi_1013_517968a97c7fc43833d9305df92c22050f33acd6.patch +rpi/rpi_1014_e29744943accac6a4ba9628416ccdaf8290e56a9.patch +rpi/rpi_1015_e6027cea1977a0b21fa58b0658e4551165994ef1.patch +rpi/rpi_1016_7bb68eae08582db1f0d07151c3f38ab711fa2b7b.patch +rpi/rpi_1017_754abebd93ea0fb34517284408bc876f6098a4d0.patch +rpi/rpi_1018_42a2df4564b1f34004645d362d82d411b28c8871.patch +rpi/rpi_1019_5389d03a3d68755c924e59aeeff506f941a74d0c.patch +rpi/rpi_1020_2c0b9d6c9ef90a5fc7a9d17332824ce2adbcd543.patch +rpi/rpi_1021_9ba63463e52572505f1b05bd77524123e338a154.patch +rpi/rpi_1022_29f639773978fb429316f7476238f484f4379c94.patch +rpi/rpi_1023_e642dd4e8b7d72270a285195643b357513913581.patch +rpi/rpi_1024_cb9c38f7f0fb558b3f67809c7fe37b2feda60e2f.patch +rpi/rpi_1025_d8128c5adbb2c02bfa17b6c3c33568e0a2cbd274.patch +rpi/rpi_1026_458e69b69a357d45a3baf8d698797da19c01a546.patch +rpi/rpi_1027_1bb431d604baa122cdc2aaee9742909c77b46690.patch +rpi/rpi_1028_32918e9e35fa324b227400fd4a715732e0acb055.patch +rpi/rpi_1029_9df5fc1517da4e328021869fea54884ae0f1fc4d.patch +rpi/rpi_1030_2bc86cc69d9b4e488013ee4487ac9b5140c6ff6a.patch +rpi/rpi_1031_2f7816c5cad9638d36b62f7628b6e665b49b5bb5.patch +rpi/rpi_1032_0589949525ceb0661b74ea41b4ae62f5d64b5eff.patch +rpi/rpi_1033_aa95d7fc35ab183fb7570171dd52ded09eff88e5.patch +rpi/rpi_1034_7bd28eedc4133822b7ff051f0d95198dcf09bc99.patch +rpi/rpi_1035_50836003e0469fd36137428bcf8e0e8dfce20d27.patch +rpi/rpi_1036_9e9096ad0ff78f0d0ff6854e7cc0c0f7f2c97bd8.patch +rpi/rpi_1037_704131d69bcf80115170b1e1df941c38d65a5633.patch +rpi/rpi_1038_19bdea2fa4cdd16e16daa60300458a85e5b6ac08.patch +rpi/rpi_1039_0956d1bfb3b7132fca2d7094babbdc32944f4b0e.patch +rpi/rpi_1040_c8628b0ef3217ebac93092aca5ab98cfd486810e.patch +rpi/rpi_1041_d76b198ab46e8d7756c7d8ea7bcfcc54e1ed2b48.patch +rpi/rpi_1042_aee26b0153f9f9d7660d03f2672e357760199996.patch +rpi/rpi_1043_e8b0c30a2b61faf628c3a4d5da505f637f4e209e.patch +rpi/rpi_1044_dadefc9616f52424817c04237c38cefe39868dd8.patch +rpi/rpi_1045_e4e1014e42566cbdaaa21e5b2bba15106efb2b6f.patch +rpi/rpi_1046_67c86ebfb2118d1e8f170112672f56040c290d6a.patch +rpi/rpi_1047_9df5883b7d126f48e3ba00850bdf920f9d9ccb9a.patch +rpi/rpi_1048_ef85ef617b4e549ada46125fde4b35c5b409ea4a.patch +rpi/rpi_1049_4455668006c8da3eb4c4b1ac2094165d3f5c2a04.patch +rpi/rpi_1050_450159ac1eb7f07164595d28c84c6be4ac54ac49.patch +rpi/rpi_1051_86973aab9ee65e8aa064ea0c0d31b78d0286d867.patch +rpi/rpi_1052_7b18501f93e4f8d42cf37ee6d40e926bb90c39d7.patch +rpi/rpi_1053_d47a85f0b306be3a0e9fb1ec66e39343c641715f.patch +rpi/rpi_1054_b183f2683f2fc232825144b9ed438be607c94b37.patch +rpi/rpi_1055_5bf5eb1e436984d1996dbda89810c7e05ebc97a8.patch +rpi/rpi_1056_d8b49e65dda4e4babc6719e2a136a5dd19e74786.patch +rpi/rpi_1057_305b1bc785a62a4343bb0d67d716fbd5cf841299.patch +rpi/rpi_1058_ba575d578532384fefacea463812c5f8dc2fd1d0.patch +rpi/rpi_1059_1f7ae1f4bc94acf308478c7c3f1a954d7001d98a.patch +rpi/rpi_1060_0923244e438d28061ff4383c69e507cbd1e4c200.patch +rpi/rpi_1061_f21cca5981c50f1296067c20a155f7f0fb68232e.patch +rpi/rpi_1062_631fde34e2de1c7c43e76f94ae64e904ed8371ae.patch +rpi/rpi_1063_dbec05566e6b77ac476e47eaf81e43bcb9933388.patch +rpi/rpi_1064_e0e588e7fa45289e2af2a8a726a023e91dfc74f9.patch +rpi/rpi_1065_e0f497f6f22aed316a501dc509b67e3184dfa605.patch +rpi/rpi_1066_f2c51b6188f069302c10ba12ae88e4adb92248cb.patch +rpi/rpi_1067_d8d3ade9bda4f69c2ac646e1b4c9ba9919b2e8b5.patch +rpi/rpi_1068_9b399f1e66f00c1a3791a299bd62b3c23a940d77.patch +rpi/rpi_1069_56fef008757934346c545e73464a01b5c8e651d1.patch +rpi/rpi_1070_a3a54c8de5a995ea2bd2e07f822ed5cc2cdf90f4.patch +rpi/rpi_1071_c3b5ae614d58308799847d5013f027bd25642cce.patch +rpi/rpi_1072_9e8f7e3c457726a4c057ad13169afaf3ccfdeb3c.patch +rpi/rpi_1073_518dcbdb91a8fe5968013ff653ab80daa74d030a.patch +rpi/rpi_1074_36ad0671c0c7a922f471ac23d361ddf9e644efd0.patch +rpi/rpi_1075_42ce650cf2a0ac3a9843918899d0fc203521c629.patch +rpi/rpi_1076_0dca82706bf0033600840a4af5bef873dd73c2aa.patch +rpi/rpi_1077_3fecf635a05caac22d10197ef5fe58c0bacaeffb.patch +rpi/rpi_1078_ef981e640ac606947bd6b47b53ea5c0e9cd72148.patch +rpi/rpi_1079_5b172d8701fbad31d866e3732bda728857b289dc.patch +rpi/rpi_1080_604e48847133f98ecfef3763dead1c4fb416163f.patch +rpi/rpi_1081_d59362b47b9960a5214628664ed7f238fd875590.patch +rpi/rpi_1082_9152aa6101077b3e30bcb7c9e374ccfb802b4a82.patch +rpi/rpi_1083_730f3336842e04f9e63636cdbcd7a5625f922b1b.patch +rpi/rpi_1084_91b5dcf7421da90ee0ce5f8b5303cb12927ba953.patch +rpi/rpi_1085_a0c8bd4ad578a151381182a4ab6e4768c1f98145.patch +rpi/rpi_1086_334060800d9251be9e7ea257749f7db55ae035aa.patch +rpi/rpi_1087_b2d5583a99dbb0c4e0d3d134bb3a762be37ffb21.patch +rpi/rpi_1088_74fba9ff245e4a727c1332ea6d36c8b1d6406b5d.patch +rpi/rpi_1089_3ab628718b12144c1cec03462132cccda3741269.patch +rpi/rpi_1090_8011d9b47f314ce033d71cb25a25ec863a8ab939.patch +rpi/rpi_1091_553d27a05d9154e0a082c88e95697fa9f0021d6a.patch +rpi/rpi_1092_64f1f5590e6b1ddfaccdec4b1f4404cc63e65c5a.patch +rpi/rpi_1093_559e7f533e1df2337d6a45659eb300cdde3c949e.patch +rpi/rpi_1094_933a62cb2268bb6bb614776dccfe2b28b23a31bb.patch +rpi/rpi_1095_492a5b68c24213067711a674e228fc47a9c21ef6.patch +rpi/rpi_1096_1f1e9926edaecc0a878235ba9b6f788341a43403.patch +rpi/rpi_1097_a240fa2467d14bdc9d2b91973ce39dbac9418c4c.patch +rpi/rpi_1098_f81f30a1ab0c0142fcd9c83ed09c17c1609a956b.patch +rpi/rpi_1099_6f779e846ac732f0c7edea8ad386fb0337e9ac28.patch +rpi/rpi_1100_0230d494fd32ff93cd15cd0b5cb1938724a82814.patch +rpi/rpi_1101_3e1f1e11da334f8794cd65d7ebe6a307a18bfd31.patch +rpi/rpi_1102_ebf60c810040db236e2239832884fc2588401ddf.patch +rpi/rpi_1103_d6fa374e5e3f94af64b676611746e766b52ea949.patch +rpi/rpi_1104_f3732290e8f16978dd5828e70c2463b67cb07765.patch +rpi/rpi_1105_99030645593464749d826228febe9e9aac7cad24.patch +rpi/rpi_1106_bc84e97ab50364bc820a8f65ec63f08e0b0cd29a.patch +rpi/rpi_1107_6a4db7770cb03ad8b5037b6fd316441daa110d20.patch +rpi/rpi_1108_7525bb801d67bffc6a527c491085813bcbc65ec4.patch +rpi/rpi_1109_59c872a5840065303e70405519ab7ee781978ca5.patch +rpi/rpi_1110_3a13b7a4ddfd64cb9087c8bbc8ce86c6f8df15ff.patch +rpi/rpi_1111_6add8982bbdb4e405724edd40e79fbaece05f3bd.patch +rpi/rpi_1112_f4ed4ec2ac59b926bd9c37e0cc32cec712b53087.patch +rpi/rpi_1113_81b71926505e981ca56b1e2dd78501272091638c.patch +rpi/rpi_1114_adc42cf3af4ac76b4447c33654d1b7050ca1352e.patch +rpi/rpi_1115_44da1400299ada40a33494fa9f22f974dddbe537.patch +rpi/rpi_1116_1201aba920851084a7549a03b0faf62903ec846b.patch +rpi/rpi_1117_df80a91297eea9dd8ec5e6930a9a0be65c4455c3.patch +rpi/rpi_1118_ddee3833978f0633ffbd68c2f0b20d4bfb2398f2.patch +rpi/rpi_1119_2c85961abdcea5163968140535e169072e2a3e12.patch +rpi/rpi_1120_d8b03439fc2e7b7086eb7ab7e78948c03ad0ecb1.patch +rpi/rpi_1121_5ee22f5464caa6ff7aaee25b235b64d5f97a594f.patch +rpi/rpi_1122_c37e2a3a41e520eeb5c604796f2bc265f778caba.patch +rpi/rpi_1123_e04bc37e5d6d6611d6c611ab20a1934b4a7ff4d9.patch +rpi/rpi_1124_5895e7e3fa8980e3c647cf872caf792bbe14ae43.patch +rpi/rpi_1125_7b2c686fcd67a51474d6d71ee2dbd5ae669f3c29.patch +rpi/rpi_1126_f9e171e3de0bab9feb32aedd744fe87571823fb8.patch +rpi/rpi_1127_8d0f55c571791d5b9901f10bd386f5205f0120de.patch +rpi/rpi_1128_5c6e3888adb40ec7d8502dc9b3a9d5ae6cc75533.patch +rpi/rpi_1129_a009e29dab78bf52a1bf86fcfacc432a9c848bb1.patch +rpi/rpi_1130_9e2624286186e6ab7593dcd0a466f889cdc213f9.patch +rpi/rpi_1131_fdf00abcd95786704c1e8193269acdbd01e0c906.patch +rpi/rpi_1132_875b7ff3965a938f30c67c6c3bf4b54002f5c6d0.patch +rpi/rpi_1133_755d112540fcd32da49b8ff44143861f854cb2af.patch +rpi/rpi_1134_c7922777b2444c1ed0f81b022036795193504a67.patch +rpi/rpi_1135_30b6169efe93b9c6d08a048ced99591f8d3c164c.patch +rpi/rpi_1136_219073d4f7f8c2a1d53ab0b5b206e7620c4c5eb5.patch +rpi/rpi_1137_6838d34e2733b683de1f0fb5a98132b4f1e8f0d2.patch +rpi/rpi_1138_bc9bc1c420e23e387b38b0561de3bfa792afff2e.patch +rpi/rpi_1139_d7138846e47b988cb2d64eec0a37d32deaeed46d.patch +rpi/rpi_1140_5c3f8e9280417185d49e6669ee0f2e5189237d79.patch +rpi/rpi_1141_5ee08055226fe3ab0e448e8cbf4db9e954fd2a6d.patch +rpi/rpi_1142_6d8a6526263da2c54fa07768c167fc3cb8d884e4.patch +rpi/rpi_1143_857895b55c3f77fea7272b95f4100f093964b00b.patch +rpi/rpi_1144_fd99abc0ea95768377d1ee117bda7068845dc466.patch +rpi/rpi_1145_958ff3ebdeea52a11bb917e724cfe4d284cd3214.patch +rpi/rpi_1146_1e6ffd75f7a93f748c195a52a2a659ce2ef77e13.patch +rpi/rpi_1147_819b32a0e3c13dcb681608d3379039be425c1feb.patch +rpi/rpi_1148_7b983bf9ab14af746651be665376c242b4ee133f.patch +rpi/rpi_1149_08c7bce2e61f7dd23c44713e8c99c97c664ed01c.patch +rpi/rpi_1150_e93cac3fe731618eb27212d819aa9299b8deac1c.patch +rpi/rpi_1151_681419f43b2dceb8a1cbfb1fc3098bee4973558a.patch +rpi/rpi_1152_9259d1fdaeaa2dd571c4dc0bb8177a231b58cf3b.patch +rpi/rpi_1153_5f28a0d7bb1b8330fae2421334c9fb17b35fe93e.patch +rpi/rpi_1154_c966aee30d85c527713cc84f6b59ce1d786a97d4.patch +rpi/rpi_1155_bf3e7a7e02408555c756a42b9ef234ce96ff4b32.patch +rpi/rpi_1156_d1ac6705c2caabe94d2bdfd2cc6a6ef7313dcaa1.patch +rpi/rpi_1157_6dc092de9c10c8766169aecb48b0bb005c790ae5.patch +rpi/rpi_1158_128784ec5a432168280107eba10e8caabe7fb2c0.patch +rpi/rpi_1159_370a09d78cf65fda2f8fc9c7a478e99d510dfcd0.patch +rpi/rpi_1160_246446d8a21c8781de5e03ace523e53d55018400.patch +rpi/rpi_1161_a7f8a9344c86650d268a2830375bb277d266634b.patch +rpi/rpi_1162_b27b57f21ab839bcf5d4d4c7599765c8afa55fee.patch +rpi/rpi_1163_0b68e6bfd1f2a687eb845462c8bdb3e81e8622e4.patch +rpi/rpi_1164_dab785645e03fc00b665a69e209a8a1f19f6dfd2.patch +rpi/rpi_1165_0a9a2d88e32d1c142ba1ed626d70e9870545af96.patch +rpi/rpi_1166_4003585a9b6a1d5da22d8dc3d8a475bc1e7b76bb.patch +rpi/rpi_1167_79c185e1a74c7840efdf9d2897e6f0ebebeae4ca.patch +rpi/rpi_1168_4073b634ed17e4f9ac61a047e3ae5bf7e51bee18.patch +rpi/rpi_1169_a5abc8d4ad9cb505862d551ed83d68180477c311.patch +rpi/rpi_1170_db9d7eecbf6c2f78b465d7ba31cd8909c3579ce4.patch +rpi/rpi_1171_62e93f080e33428055e2cb895db0856c748ed8d5.patch +rpi/rpi_1172_3e76a9f94b08602584397582d9d3010af1ab2e0a.patch +rpi/rpi_1173_7a58f2eba938383be1612ca473573ef5f6cbb9f8.patch +rpi/rpi_1174_6bfc601edd42ff66b750c622c55e6e651b0c7b76.patch +rpi/rpi_1175_62aba7fd4c12cb3c2abd6b26013d617ddd9c40c3.patch +rpi/rpi_1176_591a1185da7d0044d0a35cb8c59aa8966b86b577.patch +rpi/rpi_1177_a7f19907c158c0f2abf7cb3fd28161c8192d5cf2.patch +rpi/rpi_1178_91de763e575ca97da310963ab3de1ab27e89ac24.patch +rpi/rpi_1179_4a74fd401ba99fafa90e867fe6a7b8bac158b73e.patch +rpi/rpi_1180_371b19cf9322eb7bfe37815aee836fb767168622.patch +rpi/rpi_1181_9e528a51375e18d52d47e0fd46f1ba0dd0c41457.patch +rpi/rpi_1182_7cce460435cacd304bcdfde1b641b3e4aaa4be29.patch +rpi/rpi_1183_d520b647a7f0f7fed8bab5377ccaf65386604a94.patch +rpi/rpi_1184_524e172891286f0db2a96a59d5e8a74bd5f8bd81.patch +rpi/rpi_1185_510304a7e80aa75d966d2e1e005478712aa27d58.patch +rpi/rpi_1186_39024402e36c59b392d76c6d0be7e0303b95666a.patch +rpi/rpi_1187_5e18e755d1ac9da7f78f3e2d6e76d6686c944ca1.patch +rpi/rpi_1188_1625d5383bcb43e273b87966d5e13fa310b6de21.patch +rpi/rpi_1189_194e6b177323f0e757b2ce34c51e8721baff8b18.patch +rpi/rpi_1190_1e93eae18d2841dc37abcc458b4931722edbbe0f.patch +rpi/rpi_1191_6a747527985a3b4cf45930e905907df70551f6cf.patch +rpi/rpi_1192_a8e90198fe4842224d1c8e7f845c17bacd7657c2.patch +rpi/rpi_1193_99551f177e0c00af16228bc6d5d5234e72694803.patch +rpi/rpi_1194_5f5616e1196195f99df7ddc3a398427e254fc48f.patch +rpi/rpi_1195_606b4e6fd9c0ebeb43d12a33a0afbe750b9fa7f9.patch +rpi/rpi_1196_f55a8d67d176cd7c29bcb06956006c7b3506206a.patch +rpi/rpi_1197_0844a339fa1fbfb184f2b3bf071893be9e6c8d0a.patch +rpi/rpi_1198_43c382c981f1e95b9aed432f0529d1ec420bb210.patch +rpi/rpi_1199_030d289026ab07792cdf6fdb56342a377de4d3bd.patch +#rpi/rpi_9999_other_changes.patch diff -Nru linux-4.9.13/debian/rpi-branch linux-4.9-4.9.13/debian/rpi-branch --- linux-4.9.13/debian/rpi-branch 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/rpi-branch 2017-03-12 01:46:17.000000000 +0000 @@ -0,0 +1,7 @@ +commit af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9 +Merge: 08826d5 b40108b +Author: popcornmix +Date: Tue Apr 12 21:46:01 2016 +0100 + + Merge remote-tracking branch 'stable/linux-4.4.y' into rpi-4.4.y + diff -Nru linux-4.9.13/debian/rules linux-4.9-4.9.13/debian/rules --- linux-4.9.13/debian/rules 2017-01-24 17:59:14.000000000 +0000 +++ linux-4.9-4.9.13/debian/rules 2017-03-12 01:46:17.000000000 +0000 @@ -89,6 +89,29 @@ dh_testdir rm -rf $(BUILD_DIR) $(STAMPS_DIR) debian/lib/python/debian_linux/*.pyc debian/lib/python/debian_linux/__pycache__ $$(find debian -maxdepth 1 -type d -name 'linux-*') debian/*-modules-*-di* debian/kernel-image-*-di* debian/xen-linux-system-* debian/*-tmp dh_clean + rm -f arch/s390/include/asm/cmb.h.1 + rm -f drivers/acpi/scan.c.1 + rm -f drivers/base/reservation.c.1 + rm -f drivers/usb/gadget/f_acm.c.1 + rm -f drivers/usb/gadget/f_ecm.c.1 + rm -f drivers/usb/gadget/f_obex.c.1 + rm -f drivers/usb/gadget/f_serial.c.1 + rm -f drivers/usb/gadget/f_subset.c.1 + rm -f include/linux/reservation.h.1 + rm -f include/net/cfg80211.h.1 + rm -f kernel/sys.c.1 + rm -f lib/crc32.c.1 + rm -f drivers/dma-buf/reservation.c.1 + rm -f drivers/dma-buf/seqno-fence.c.1 + rm -f drivers/usb/gadget/function/f_acm.c.1 + rm -f drivers/usb/gadget/function/f_ecm.c.1 + rm -f drivers/usb/gadget/function/f_obex.c.1 + rm -f drivers/usb/gadget/function/f_serial.c.1 + rm -f drivers/usb/gadget/function/f_subset.c.1 + chmod 644 arch/arm/boot/dts/overlays/mcp3008-overlay.dts + chmod 644 drivers/net/wireless/realtek/rtl8192cu/clean drivers/net/wireless/realtek/rtl8192cu/ifcfg-wlan0 drivers/net/wireless/realtek/rtl8192cu/runwpa drivers/net/wireless/realtek/rtl8192cu/wlan0dhcp scripts/knlinfo scripts/mkknlimg sound/arm/bcm2835-ctl.c sound/arm/bcm2835-pcm.c sound/arm/bcm2835-vchiq.c sound/arm/bcm2835.h arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts + + CONTROL_FILES = debian/changelog $(wildcard debian/templates/*.in) CONTROL_FILES += debian/config/defines $(wildcard debian/config/*/defines) $(wildcard debian/config/*/*/defines) diff -Nru linux-4.9.13/debian/rules.gen linux-4.9-4.9.13/debian/rules.gen --- linux-4.9.13/debian/rules.gen 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/rules.gen 2017-03-12 01:46:17.000000000 +0000 @@ -2,584 +2,584 @@ binary-arch: binary-arch_alpha binary-arch_amd64 binary-arch_arm64 binary-arch_armel binary-arch_armhf binary-arch_hppa binary-arch_i386 binary-arch_m68k binary-arch_mips binary-arch_mips64 binary-arch_mips64el binary-arch_mipsel binary-arch_mipsn32 binary-arch_mipsn32el binary-arch_powerpc binary-arch_powerpcspe binary-arch_ppc64 binary-arch_ppc64el binary-arch_s390 binary-arch_s390x binary-arch_sh3 binary-arch_sh4 binary-arch_sparc binary-arch_sparc64 binary-arch_tilegx binary-arch_x32 binary-arch_alpha:: binary-arch_alpha_none binary-arch_alpha_real binary-arch_alpha:: - $(MAKE) -f debian/rules.real install-udeb_alpha ABINAME='4.9.0-2' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-alpha-generic-di nic-modules-4.9.0-2-alpha-generic-di nic-wireless-modules-4.9.0-2-alpha-generic-di nic-shared-modules-4.9.0-2-alpha-generic-di serial-modules-4.9.0-2-alpha-generic-di usb-serial-modules-4.9.0-2-alpha-generic-di ppp-modules-4.9.0-2-alpha-generic-di pata-modules-4.9.0-2-alpha-generic-di cdrom-core-modules-4.9.0-2-alpha-generic-di scsi-core-modules-4.9.0-2-alpha-generic-di scsi-modules-4.9.0-2-alpha-generic-di loop-modules-4.9.0-2-alpha-generic-di btrfs-modules-4.9.0-2-alpha-generic-di ext4-modules-4.9.0-2-alpha-generic-di isofs-modules-4.9.0-2-alpha-generic-di jfs-modules-4.9.0-2-alpha-generic-di xfs-modules-4.9.0-2-alpha-generic-di fat-modules-4.9.0-2-alpha-generic-di md-modules-4.9.0-2-alpha-generic-di multipath-modules-4.9.0-2-alpha-generic-di usb-modules-4.9.0-2-alpha-generic-di usb-storage-modules-4.9.0-2-alpha-generic-di fb-modules-4.9.0-2-alpha-generic-di input-modules-4.9.0-2-alpha-generic-di event-modules-4.9.0-2-alpha-generic-di mouse-modules-4.9.0-2-alpha-generic-di nic-pcmcia-modules-4.9.0-2-alpha-generic-di pcmcia-modules-4.9.0-2-alpha-generic-di nic-usb-modules-4.9.0-2-alpha-generic-di sata-modules-4.9.0-2-alpha-generic-di crc-modules-4.9.0-2-alpha-generic-di crypto-modules-4.9.0-2-alpha-generic-di crypto-dm-modules-4.9.0-2-alpha-generic-di ata-modules-4.9.0-2-alpha-generic-di nbd-modules-4.9.0-2-alpha-generic-di squashfs-modules-4.9.0-2-alpha-generic-di virtio-modules-4.9.0-2-alpha-generic-di zlib-modules-4.9.0-2-alpha-generic-di fuse-modules-4.9.0-2-alpha-generic-di srm-modules-4.9.0-2-alpha-generic-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_alpha ABINAME='4.9.0-2' ARCH='alpha' DO_LIBC='False' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-alpha-generic-di nic-modules-4.9.0-2-alpha-generic-di nic-wireless-modules-4.9.0-2-alpha-generic-di nic-shared-modules-4.9.0-2-alpha-generic-di serial-modules-4.9.0-2-alpha-generic-di usb-serial-modules-4.9.0-2-alpha-generic-di ppp-modules-4.9.0-2-alpha-generic-di pata-modules-4.9.0-2-alpha-generic-di cdrom-core-modules-4.9.0-2-alpha-generic-di scsi-core-modules-4.9.0-2-alpha-generic-di scsi-modules-4.9.0-2-alpha-generic-di loop-modules-4.9.0-2-alpha-generic-di btrfs-modules-4.9.0-2-alpha-generic-di ext4-modules-4.9.0-2-alpha-generic-di isofs-modules-4.9.0-2-alpha-generic-di jfs-modules-4.9.0-2-alpha-generic-di xfs-modules-4.9.0-2-alpha-generic-di fat-modules-4.9.0-2-alpha-generic-di md-modules-4.9.0-2-alpha-generic-di multipath-modules-4.9.0-2-alpha-generic-di usb-modules-4.9.0-2-alpha-generic-di usb-storage-modules-4.9.0-2-alpha-generic-di fb-modules-4.9.0-2-alpha-generic-di input-modules-4.9.0-2-alpha-generic-di event-modules-4.9.0-2-alpha-generic-di mouse-modules-4.9.0-2-alpha-generic-di nic-pcmcia-modules-4.9.0-2-alpha-generic-di pcmcia-modules-4.9.0-2-alpha-generic-di nic-usb-modules-4.9.0-2-alpha-generic-di sata-modules-4.9.0-2-alpha-generic-di crc-modules-4.9.0-2-alpha-generic-di crypto-modules-4.9.0-2-alpha-generic-di crypto-dm-modules-4.9.0-2-alpha-generic-di ata-modules-4.9.0-2-alpha-generic-di nbd-modules-4.9.0-2-alpha-generic-di squashfs-modules-4.9.0-2-alpha-generic-di virtio-modules-4.9.0-2-alpha-generic-di zlib-modules-4.9.0-2-alpha-generic-di fuse-modules-4.9.0-2-alpha-generic-di srm-modules-4.9.0-2-alpha-generic-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_alpha_none: binary-arch_alpha_none_alpha-generic binary-arch_alpha_none_alpha-smp binary-arch_alpha_none_real binary-arch_alpha_none_alpha-generic: binary-arch_alpha_none_alpha-generic_real binary-arch_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_alpha_none_alpha-smp: binary-arch_alpha_none_alpha-smp_real binary-arch_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_alpha_none_real: binary-arch_alpha_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='alpha' DO_LIBC='False' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_amd64:: binary-arch_amd64_extra binary-arch_amd64_none binary-arch_amd64_real binary-arch_amd64_rt binary-arch_amd64:: - $(MAKE) -f debian/rules.real install-udeb_amd64 ABINAME='4.9.0-2' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-amd64-di nic-modules-4.9.0-2-amd64-di nic-wireless-modules-4.9.0-2-amd64-di nic-shared-modules-4.9.0-2-amd64-di serial-modules-4.9.0-2-amd64-di usb-serial-modules-4.9.0-2-amd64-di ppp-modules-4.9.0-2-amd64-di pata-modules-4.9.0-2-amd64-di cdrom-core-modules-4.9.0-2-amd64-di firewire-core-modules-4.9.0-2-amd64-di scsi-core-modules-4.9.0-2-amd64-di scsi-modules-4.9.0-2-amd64-di loop-modules-4.9.0-2-amd64-di btrfs-modules-4.9.0-2-amd64-di ext4-modules-4.9.0-2-amd64-di isofs-modules-4.9.0-2-amd64-di jfs-modules-4.9.0-2-amd64-di ntfs-modules-4.9.0-2-amd64-di xfs-modules-4.9.0-2-amd64-di fat-modules-4.9.0-2-amd64-di md-modules-4.9.0-2-amd64-di multipath-modules-4.9.0-2-amd64-di usb-modules-4.9.0-2-amd64-di usb-storage-modules-4.9.0-2-amd64-di pcmcia-storage-modules-4.9.0-2-amd64-di fb-modules-4.9.0-2-amd64-di input-modules-4.9.0-2-amd64-di event-modules-4.9.0-2-amd64-di mouse-modules-4.9.0-2-amd64-di nic-pcmcia-modules-4.9.0-2-amd64-di pcmcia-modules-4.9.0-2-amd64-di nic-usb-modules-4.9.0-2-amd64-di sata-modules-4.9.0-2-amd64-di acpi-modules-4.9.0-2-amd64-di i2c-modules-4.9.0-2-amd64-di crc-modules-4.9.0-2-amd64-di crypto-modules-4.9.0-2-amd64-di crypto-dm-modules-4.9.0-2-amd64-di efi-modules-4.9.0-2-amd64-di ata-modules-4.9.0-2-amd64-di mmc-core-modules-4.9.0-2-amd64-di mmc-modules-4.9.0-2-amd64-di nbd-modules-4.9.0-2-amd64-di squashfs-modules-4.9.0-2-amd64-di speakup-modules-4.9.0-2-amd64-di virtio-modules-4.9.0-2-amd64-di uinput-modules-4.9.0-2-amd64-di sound-modules-4.9.0-2-amd64-di hyperv-modules-4.9.0-2-amd64-di udf-modules-4.9.0-2-amd64-di fuse-modules-4.9.0-2-amd64-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_amd64 ABINAME='4.9.0-2' ARCH='amd64' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-amd64-di nic-modules-4.9.0-2-amd64-di nic-wireless-modules-4.9.0-2-amd64-di nic-shared-modules-4.9.0-2-amd64-di serial-modules-4.9.0-2-amd64-di usb-serial-modules-4.9.0-2-amd64-di ppp-modules-4.9.0-2-amd64-di pata-modules-4.9.0-2-amd64-di cdrom-core-modules-4.9.0-2-amd64-di firewire-core-modules-4.9.0-2-amd64-di scsi-core-modules-4.9.0-2-amd64-di scsi-modules-4.9.0-2-amd64-di loop-modules-4.9.0-2-amd64-di btrfs-modules-4.9.0-2-amd64-di ext4-modules-4.9.0-2-amd64-di isofs-modules-4.9.0-2-amd64-di jfs-modules-4.9.0-2-amd64-di ntfs-modules-4.9.0-2-amd64-di xfs-modules-4.9.0-2-amd64-di fat-modules-4.9.0-2-amd64-di md-modules-4.9.0-2-amd64-di multipath-modules-4.9.0-2-amd64-di usb-modules-4.9.0-2-amd64-di usb-storage-modules-4.9.0-2-amd64-di pcmcia-storage-modules-4.9.0-2-amd64-di fb-modules-4.9.0-2-amd64-di input-modules-4.9.0-2-amd64-di event-modules-4.9.0-2-amd64-di mouse-modules-4.9.0-2-amd64-di nic-pcmcia-modules-4.9.0-2-amd64-di pcmcia-modules-4.9.0-2-amd64-di nic-usb-modules-4.9.0-2-amd64-di sata-modules-4.9.0-2-amd64-di acpi-modules-4.9.0-2-amd64-di i2c-modules-4.9.0-2-amd64-di crc-modules-4.9.0-2-amd64-di crypto-modules-4.9.0-2-amd64-di crypto-dm-modules-4.9.0-2-amd64-di efi-modules-4.9.0-2-amd64-di ata-modules-4.9.0-2-amd64-di mmc-core-modules-4.9.0-2-amd64-di mmc-modules-4.9.0-2-amd64-di nbd-modules-4.9.0-2-amd64-di squashfs-modules-4.9.0-2-amd64-di speakup-modules-4.9.0-2-amd64-di virtio-modules-4.9.0-2-amd64-di uinput-modules-4.9.0-2-amd64-di sound-modules-4.9.0-2-amd64-di hyperv-modules-4.9.0-2-amd64-di udf-modules-4.9.0-2-amd64-di fuse-modules-4.9.0-2-amd64-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_amd64_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='amd64' DH_OPTIONS='-plinux-compiler-gcc-6-x86' binary-arch_amd64_none: binary-arch_amd64_none_amd64 binary-arch_amd64_none_real binary-arch_amd64_none_amd64: binary-arch_amd64_none_amd64_real binary-arch_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_amd64_none_real: binary-arch_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='amd64' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_amd64_rt: binary-arch_amd64_rt_amd64 binary-arch_amd64_rt_real binary-arch_amd64_rt_amd64: binary-arch_amd64_rt_amd64_real binary-arch_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_amd64_rt_real: binary-arch_arm64:: binary-arch_arm64_none binary-arch_arm64_real binary-arch_arm64:: - $(MAKE) -f debian/rules.real install-udeb_arm64 ABINAME='4.9.0-2' ARCH='arm64' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-arm64-di nic-modules-4.9.0-2-arm64-di nic-wireless-modules-4.9.0-2-arm64-di nic-shared-modules-4.9.0-2-arm64-di ppp-modules-4.9.0-2-arm64-di cdrom-core-modules-4.9.0-2-arm64-di scsi-core-modules-4.9.0-2-arm64-di scsi-modules-4.9.0-2-arm64-di loop-modules-4.9.0-2-arm64-di btrfs-modules-4.9.0-2-arm64-di ext4-modules-4.9.0-2-arm64-di isofs-modules-4.9.0-2-arm64-di jfs-modules-4.9.0-2-arm64-di xfs-modules-4.9.0-2-arm64-di fat-modules-4.9.0-2-arm64-di md-modules-4.9.0-2-arm64-di multipath-modules-4.9.0-2-arm64-di usb-modules-4.9.0-2-arm64-di usb-storage-modules-4.9.0-2-arm64-di fb-modules-4.9.0-2-arm64-di input-modules-4.9.0-2-arm64-di event-modules-4.9.0-2-arm64-di nic-usb-modules-4.9.0-2-arm64-di sata-modules-4.9.0-2-arm64-di i2c-modules-4.9.0-2-arm64-di crc-modules-4.9.0-2-arm64-di crypto-modules-4.9.0-2-arm64-di crypto-dm-modules-4.9.0-2-arm64-di efi-modules-4.9.0-2-arm64-di ata-modules-4.9.0-2-arm64-di mmc-modules-4.9.0-2-arm64-di nbd-modules-4.9.0-2-arm64-di squashfs-modules-4.9.0-2-arm64-di virtio-modules-4.9.0-2-arm64-di uinput-modules-4.9.0-2-arm64-di leds-modules-4.9.0-2-arm64-di udf-modules-4.9.0-2-arm64-di fuse-modules-4.9.0-2-arm64-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_arm64 ABINAME='4.9.0-2' ARCH='arm64' DO_LIBC='False' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-arm64-di nic-modules-4.9.0-2-arm64-di nic-wireless-modules-4.9.0-2-arm64-di nic-shared-modules-4.9.0-2-arm64-di ppp-modules-4.9.0-2-arm64-di cdrom-core-modules-4.9.0-2-arm64-di scsi-core-modules-4.9.0-2-arm64-di scsi-modules-4.9.0-2-arm64-di loop-modules-4.9.0-2-arm64-di btrfs-modules-4.9.0-2-arm64-di ext4-modules-4.9.0-2-arm64-di isofs-modules-4.9.0-2-arm64-di jfs-modules-4.9.0-2-arm64-di xfs-modules-4.9.0-2-arm64-di fat-modules-4.9.0-2-arm64-di md-modules-4.9.0-2-arm64-di multipath-modules-4.9.0-2-arm64-di usb-modules-4.9.0-2-arm64-di usb-storage-modules-4.9.0-2-arm64-di fb-modules-4.9.0-2-arm64-di input-modules-4.9.0-2-arm64-di event-modules-4.9.0-2-arm64-di nic-usb-modules-4.9.0-2-arm64-di sata-modules-4.9.0-2-arm64-di i2c-modules-4.9.0-2-arm64-di crc-modules-4.9.0-2-arm64-di crypto-modules-4.9.0-2-arm64-di crypto-dm-modules-4.9.0-2-arm64-di efi-modules-4.9.0-2-arm64-di ata-modules-4.9.0-2-arm64-di mmc-modules-4.9.0-2-arm64-di nbd-modules-4.9.0-2-arm64-di squashfs-modules-4.9.0-2-arm64-di virtio-modules-4.9.0-2-arm64-di uinput-modules-4.9.0-2-arm64-di leds-modules-4.9.0-2-arm64-di udf-modules-4.9.0-2-arm64-di fuse-modules-4.9.0-2-arm64-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_arm64_none: binary-arch_arm64_none_arm64 binary-arch_arm64_none_real binary-arch_arm64_none_arm64: binary-arch_arm64_none_arm64_real binary-arch_arm64_none_arm64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64-unsigned' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_arm64_none_real: binary-arch_arm64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='arm64' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='arm64' DO_LIBC='False' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_armel:: binary-arch_armel_extra binary-arch_armel_none binary-arch_armel_real binary-arch_armel:: - $(MAKE) -f debian/rules.real install-udeb_armel ABINAME='4.9.0-2' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-marvell-di nic-modules-4.9.0-2-marvell-di nic-shared-modules-4.9.0-2-marvell-di usb-serial-modules-4.9.0-2-marvell-di ppp-modules-4.9.0-2-marvell-di cdrom-core-modules-4.9.0-2-marvell-di scsi-core-modules-4.9.0-2-marvell-di loop-modules-4.9.0-2-marvell-di ipv6-modules-4.9.0-2-marvell-di btrfs-modules-4.9.0-2-marvell-di ext4-modules-4.9.0-2-marvell-di isofs-modules-4.9.0-2-marvell-di jffs2-modules-4.9.0-2-marvell-di jfs-modules-4.9.0-2-marvell-di fat-modules-4.9.0-2-marvell-di minix-modules-4.9.0-2-marvell-di md-modules-4.9.0-2-marvell-di multipath-modules-4.9.0-2-marvell-di usb-modules-4.9.0-2-marvell-di usb-storage-modules-4.9.0-2-marvell-di fb-modules-4.9.0-2-marvell-di input-modules-4.9.0-2-marvell-di event-modules-4.9.0-2-marvell-di mouse-modules-4.9.0-2-marvell-di nic-usb-modules-4.9.0-2-marvell-di sata-modules-4.9.0-2-marvell-di crc-modules-4.9.0-2-marvell-di crypto-modules-4.9.0-2-marvell-di crypto-dm-modules-4.9.0-2-marvell-di mmc-modules-4.9.0-2-marvell-di nbd-modules-4.9.0-2-marvell-di squashfs-modules-4.9.0-2-marvell-di uinput-modules-4.9.0-2-marvell-di zlib-modules-4.9.0-2-marvell-di leds-modules-4.9.0-2-marvell-di udf-modules-4.9.0-2-marvell-di fuse-modules-4.9.0-2-marvell-di mtd-modules-4.9.0-2-marvell-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_armel ABINAME='4.9.0-2' ARCH='armel' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-marvell-di nic-modules-4.9.0-2-marvell-di nic-shared-modules-4.9.0-2-marvell-di usb-serial-modules-4.9.0-2-marvell-di ppp-modules-4.9.0-2-marvell-di cdrom-core-modules-4.9.0-2-marvell-di scsi-core-modules-4.9.0-2-marvell-di loop-modules-4.9.0-2-marvell-di ipv6-modules-4.9.0-2-marvell-di btrfs-modules-4.9.0-2-marvell-di ext4-modules-4.9.0-2-marvell-di isofs-modules-4.9.0-2-marvell-di jffs2-modules-4.9.0-2-marvell-di jfs-modules-4.9.0-2-marvell-di fat-modules-4.9.0-2-marvell-di minix-modules-4.9.0-2-marvell-di md-modules-4.9.0-2-marvell-di multipath-modules-4.9.0-2-marvell-di usb-modules-4.9.0-2-marvell-di usb-storage-modules-4.9.0-2-marvell-di fb-modules-4.9.0-2-marvell-di input-modules-4.9.0-2-marvell-di event-modules-4.9.0-2-marvell-di mouse-modules-4.9.0-2-marvell-di nic-usb-modules-4.9.0-2-marvell-di sata-modules-4.9.0-2-marvell-di crc-modules-4.9.0-2-marvell-di crypto-modules-4.9.0-2-marvell-di crypto-dm-modules-4.9.0-2-marvell-di mmc-modules-4.9.0-2-marvell-di nbd-modules-4.9.0-2-marvell-di squashfs-modules-4.9.0-2-marvell-di uinput-modules-4.9.0-2-marvell-di zlib-modules-4.9.0-2-marvell-di leds-modules-4.9.0-2-marvell-di udf-modules-4.9.0-2-marvell-di fuse-modules-4.9.0-2-marvell-di mtd-modules-4.9.0-2-marvell-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_armel_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='armel' DH_OPTIONS='-plinux-compiler-gcc-6-arm' binary-arch_armel_none: binary-arch_armel_none_marvell binary-arch_armel_none_real binary-arch_armel_none_marvell: binary-arch_armel_none_marvell_real binary-arch_armel_none_marvell_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_armel_none_real: binary-arch_armel_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='armel' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_armhf:: binary-arch_armhf_extra binary-arch_armhf_none binary-arch_armhf_real binary-arch_armhf:: - $(MAKE) -f debian/rules.real install-udeb_armhf ABINAME='4.9.0-2' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-armmp-di nic-modules-4.9.0-2-armmp-di nic-wireless-modules-4.9.0-2-armmp-di nic-shared-modules-4.9.0-2-armmp-di ppp-modules-4.9.0-2-armmp-di pata-modules-4.9.0-2-armmp-di scsi-core-modules-4.9.0-2-armmp-di scsi-modules-4.9.0-2-armmp-di loop-modules-4.9.0-2-armmp-di btrfs-modules-4.9.0-2-armmp-di ext4-modules-4.9.0-2-armmp-di isofs-modules-4.9.0-2-armmp-di jfs-modules-4.9.0-2-armmp-di fat-modules-4.9.0-2-armmp-di md-modules-4.9.0-2-armmp-di multipath-modules-4.9.0-2-armmp-di usb-modules-4.9.0-2-armmp-di usb-storage-modules-4.9.0-2-armmp-di fb-modules-4.9.0-2-armmp-di input-modules-4.9.0-2-armmp-di event-modules-4.9.0-2-armmp-di nic-usb-modules-4.9.0-2-armmp-di sata-modules-4.9.0-2-armmp-di crc-modules-4.9.0-2-armmp-di crypto-modules-4.9.0-2-armmp-di crypto-dm-modules-4.9.0-2-armmp-di efi-modules-4.9.0-2-armmp-di ata-modules-4.9.0-2-armmp-di mmc-modules-4.9.0-2-armmp-di nbd-modules-4.9.0-2-armmp-di squashfs-modules-4.9.0-2-armmp-di virtio-modules-4.9.0-2-armmp-di uinput-modules-4.9.0-2-armmp-di zlib-modules-4.9.0-2-armmp-di leds-modules-4.9.0-2-armmp-di udf-modules-4.9.0-2-armmp-di fuse-modules-4.9.0-2-armmp-di mtd-modules-4.9.0-2-armmp-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_armhf ABINAME='4.9.0-2' ARCH='armhf' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-rpi-di scsi-core-modules-4.9.0-2-rpi-di loop-modules-4.9.0-2-rpi-di btrfs-modules-4.9.0-2-rpi-di isofs-modules-4.9.0-2-rpi-di jfs-modules-4.9.0-2-rpi-di minix-modules-4.9.0-2-rpi-di md-modules-4.9.0-2-rpi-di multipath-modules-4.9.0-2-rpi-di usb-storage-modules-4.9.0-2-rpi-di input-modules-4.9.0-2-rpi-di nic-usb-modules-4.9.0-2-rpi-di crc-modules-4.9.0-2-rpi-di crypto-modules-4.9.0-2-rpi-di crypto-dm-modules-4.9.0-2-rpi-di nbd-modules-4.9.0-2-rpi-di squashfs-modules-4.9.0-2-rpi-di uinput-modules-4.9.0-2-rpi-di udf-modules-4.9.0-2-rpi-di fuse-modules-4.9.0-2-rpi-di kernel-image-4.9.0-2-rpi2-di scsi-core-modules-4.9.0-2-rpi2-di loop-modules-4.9.0-2-rpi2-di btrfs-modules-4.9.0-2-rpi2-di isofs-modules-4.9.0-2-rpi2-di jfs-modules-4.9.0-2-rpi2-di minix-modules-4.9.0-2-rpi2-di md-modules-4.9.0-2-rpi2-di multipath-modules-4.9.0-2-rpi2-di usb-storage-modules-4.9.0-2-rpi2-di input-modules-4.9.0-2-rpi2-di nic-usb-modules-4.9.0-2-rpi2-di crc-modules-4.9.0-2-rpi2-di crypto-modules-4.9.0-2-rpi2-di crypto-dm-modules-4.9.0-2-rpi2-di nbd-modules-4.9.0-2-rpi2-di squashfs-modules-4.9.0-2-rpi2-di uinput-modules-4.9.0-2-rpi2-di udf-modules-4.9.0-2-rpi2-di fuse-modules-4.9.0-2-rpi2-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_armhf_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='armhf' DH_OPTIONS='-plinux-compiler-gcc-6-arm' -binary-arch_armhf_none: binary-arch_armhf_none_armmp binary-arch_armhf_none_armmp-lpae binary-arch_armhf_none_real -binary-arch_armhf_none_armmp: binary-arch_armhf_none_armmp_real -binary-arch_armhf_none_armmp-lpae: binary-arch_armhf_none_armmp-lpae_real -binary-arch_armhf_none_armmp-lpae_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp-lpae' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-lpae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.armmp-lpae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp-lpae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp-lpae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' -binary-arch_armhf_none_armmp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +binary-arch_armhf_none: binary-arch_armhf_none_real binary-arch_armhf_none_rpi binary-arch_armhf_none_rpi2 binary-arch_armhf_none_real: +binary-arch_armhf_none_rpi: binary-arch_armhf_none_rpi_real +binary-arch_armhf_none_rpi2: binary-arch_armhf_none_rpi2_real +binary-arch_armhf_none_rpi2_real:: + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi2' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi2' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi2' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi2' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +binary-arch_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_armhf_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='armhf' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_hppa:: binary-arch_hppa_none binary-arch_hppa_real binary-arch_hppa:: - $(MAKE) -f debian/rules.real install-udeb_hppa ABINAME='4.9.0-2' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-parisc-di nic-modules-4.9.0-2-parisc-di nic-shared-modules-4.9.0-2-parisc-di serial-modules-4.9.0-2-parisc-di usb-serial-modules-4.9.0-2-parisc-di ppp-modules-4.9.0-2-parisc-di pata-modules-4.9.0-2-parisc-di cdrom-core-modules-4.9.0-2-parisc-di scsi-core-modules-4.9.0-2-parisc-di scsi-modules-4.9.0-2-parisc-di loop-modules-4.9.0-2-parisc-di btrfs-modules-4.9.0-2-parisc-di ext4-modules-4.9.0-2-parisc-di isofs-modules-4.9.0-2-parisc-di jfs-modules-4.9.0-2-parisc-di xfs-modules-4.9.0-2-parisc-di fat-modules-4.9.0-2-parisc-di md-modules-4.9.0-2-parisc-di multipath-modules-4.9.0-2-parisc-di usb-modules-4.9.0-2-parisc-di usb-storage-modules-4.9.0-2-parisc-di input-modules-4.9.0-2-parisc-di event-modules-4.9.0-2-parisc-di mouse-modules-4.9.0-2-parisc-di nic-usb-modules-4.9.0-2-parisc-di sata-modules-4.9.0-2-parisc-di crc-modules-4.9.0-2-parisc-di crypto-modules-4.9.0-2-parisc-di crypto-dm-modules-4.9.0-2-parisc-di ata-modules-4.9.0-2-parisc-di nbd-modules-4.9.0-2-parisc-di squashfs-modules-4.9.0-2-parisc-di virtio-modules-4.9.0-2-parisc-di zlib-modules-4.9.0-2-parisc-di fuse-modules-4.9.0-2-parisc-di kernel-image-4.9.0-2-parisc64-smp-di nic-modules-4.9.0-2-parisc64-smp-di nic-shared-modules-4.9.0-2-parisc64-smp-di serial-modules-4.9.0-2-parisc64-smp-di usb-serial-modules-4.9.0-2-parisc64-smp-di ppp-modules-4.9.0-2-parisc64-smp-di pata-modules-4.9.0-2-parisc64-smp-di cdrom-core-modules-4.9.0-2-parisc64-smp-di scsi-core-modules-4.9.0-2-parisc64-smp-di scsi-modules-4.9.0-2-parisc64-smp-di loop-modules-4.9.0-2-parisc64-smp-di btrfs-modules-4.9.0-2-parisc64-smp-di ext4-modules-4.9.0-2-parisc64-smp-di isofs-modules-4.9.0-2-parisc64-smp-di jfs-modules-4.9.0-2-parisc64-smp-di xfs-modules-4.9.0-2-parisc64-smp-di fat-modules-4.9.0-2-parisc64-smp-di md-modules-4.9.0-2-parisc64-smp-di multipath-modules-4.9.0-2-parisc64-smp-di usb-modules-4.9.0-2-parisc64-smp-di usb-storage-modules-4.9.0-2-parisc64-smp-di fb-modules-4.9.0-2-parisc64-smp-di input-modules-4.9.0-2-parisc64-smp-di event-modules-4.9.0-2-parisc64-smp-di mouse-modules-4.9.0-2-parisc64-smp-di nic-usb-modules-4.9.0-2-parisc64-smp-di sata-modules-4.9.0-2-parisc64-smp-di crc-modules-4.9.0-2-parisc64-smp-di crypto-modules-4.9.0-2-parisc64-smp-di crypto-dm-modules-4.9.0-2-parisc64-smp-di ata-modules-4.9.0-2-parisc64-smp-di nbd-modules-4.9.0-2-parisc64-smp-di squashfs-modules-4.9.0-2-parisc64-smp-di virtio-modules-4.9.0-2-parisc64-smp-di zlib-modules-4.9.0-2-parisc64-smp-di fuse-modules-4.9.0-2-parisc64-smp-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_hppa ABINAME='4.9.0-2' ARCH='hppa' DO_LIBC='False' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-parisc-di nic-modules-4.9.0-2-parisc-di nic-shared-modules-4.9.0-2-parisc-di serial-modules-4.9.0-2-parisc-di usb-serial-modules-4.9.0-2-parisc-di ppp-modules-4.9.0-2-parisc-di pata-modules-4.9.0-2-parisc-di cdrom-core-modules-4.9.0-2-parisc-di scsi-core-modules-4.9.0-2-parisc-di scsi-modules-4.9.0-2-parisc-di loop-modules-4.9.0-2-parisc-di btrfs-modules-4.9.0-2-parisc-di ext4-modules-4.9.0-2-parisc-di isofs-modules-4.9.0-2-parisc-di jfs-modules-4.9.0-2-parisc-di xfs-modules-4.9.0-2-parisc-di fat-modules-4.9.0-2-parisc-di md-modules-4.9.0-2-parisc-di multipath-modules-4.9.0-2-parisc-di usb-modules-4.9.0-2-parisc-di usb-storage-modules-4.9.0-2-parisc-di input-modules-4.9.0-2-parisc-di event-modules-4.9.0-2-parisc-di mouse-modules-4.9.0-2-parisc-di nic-usb-modules-4.9.0-2-parisc-di sata-modules-4.9.0-2-parisc-di crc-modules-4.9.0-2-parisc-di crypto-modules-4.9.0-2-parisc-di crypto-dm-modules-4.9.0-2-parisc-di ata-modules-4.9.0-2-parisc-di nbd-modules-4.9.0-2-parisc-di squashfs-modules-4.9.0-2-parisc-di virtio-modules-4.9.0-2-parisc-di zlib-modules-4.9.0-2-parisc-di fuse-modules-4.9.0-2-parisc-di kernel-image-4.9.0-2-parisc64-smp-di nic-modules-4.9.0-2-parisc64-smp-di nic-shared-modules-4.9.0-2-parisc64-smp-di serial-modules-4.9.0-2-parisc64-smp-di usb-serial-modules-4.9.0-2-parisc64-smp-di ppp-modules-4.9.0-2-parisc64-smp-di pata-modules-4.9.0-2-parisc64-smp-di cdrom-core-modules-4.9.0-2-parisc64-smp-di scsi-core-modules-4.9.0-2-parisc64-smp-di scsi-modules-4.9.0-2-parisc64-smp-di loop-modules-4.9.0-2-parisc64-smp-di btrfs-modules-4.9.0-2-parisc64-smp-di ext4-modules-4.9.0-2-parisc64-smp-di isofs-modules-4.9.0-2-parisc64-smp-di jfs-modules-4.9.0-2-parisc64-smp-di xfs-modules-4.9.0-2-parisc64-smp-di fat-modules-4.9.0-2-parisc64-smp-di md-modules-4.9.0-2-parisc64-smp-di multipath-modules-4.9.0-2-parisc64-smp-di usb-modules-4.9.0-2-parisc64-smp-di usb-storage-modules-4.9.0-2-parisc64-smp-di fb-modules-4.9.0-2-parisc64-smp-di input-modules-4.9.0-2-parisc64-smp-di event-modules-4.9.0-2-parisc64-smp-di mouse-modules-4.9.0-2-parisc64-smp-di nic-usb-modules-4.9.0-2-parisc64-smp-di sata-modules-4.9.0-2-parisc64-smp-di crc-modules-4.9.0-2-parisc64-smp-di crypto-modules-4.9.0-2-parisc64-smp-di crypto-dm-modules-4.9.0-2-parisc64-smp-di ata-modules-4.9.0-2-parisc64-smp-di nbd-modules-4.9.0-2-parisc64-smp-di squashfs-modules-4.9.0-2-parisc64-smp-di virtio-modules-4.9.0-2-parisc64-smp-di zlib-modules-4.9.0-2-parisc64-smp-di fuse-modules-4.9.0-2-parisc64-smp-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_hppa_none: binary-arch_hppa_none_parisc binary-arch_hppa_none_parisc64-smp binary-arch_hppa_none_real binary-arch_hppa_none_parisc: binary-arch_hppa_none_parisc_real binary-arch_hppa_none_parisc64-smp: binary-arch_hppa_none_parisc64-smp_real binary-arch_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_hppa_none_real: binary-arch_hppa_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='hppa' DO_LIBC='False' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_i386:: binary-arch_i386_extra binary-arch_i386_none binary-arch_i386_real binary-arch_i386_rt binary-arch_i386:: - $(MAKE) -f debian/rules.real install-udeb_i386 ABINAME='4.9.0-2' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-686-di nic-modules-4.9.0-2-686-di nic-wireless-modules-4.9.0-2-686-di nic-shared-modules-4.9.0-2-686-di serial-modules-4.9.0-2-686-di usb-serial-modules-4.9.0-2-686-di ppp-modules-4.9.0-2-686-di pata-modules-4.9.0-2-686-di cdrom-core-modules-4.9.0-2-686-di firewire-core-modules-4.9.0-2-686-di scsi-core-modules-4.9.0-2-686-di scsi-modules-4.9.0-2-686-di loop-modules-4.9.0-2-686-di btrfs-modules-4.9.0-2-686-di ext4-modules-4.9.0-2-686-di isofs-modules-4.9.0-2-686-di jfs-modules-4.9.0-2-686-di ntfs-modules-4.9.0-2-686-di xfs-modules-4.9.0-2-686-di fat-modules-4.9.0-2-686-di md-modules-4.9.0-2-686-di multipath-modules-4.9.0-2-686-di usb-modules-4.9.0-2-686-di usb-storage-modules-4.9.0-2-686-di pcmcia-storage-modules-4.9.0-2-686-di fb-modules-4.9.0-2-686-di input-modules-4.9.0-2-686-di event-modules-4.9.0-2-686-di mouse-modules-4.9.0-2-686-di nic-pcmcia-modules-4.9.0-2-686-di pcmcia-modules-4.9.0-2-686-di nic-usb-modules-4.9.0-2-686-di sata-modules-4.9.0-2-686-di acpi-modules-4.9.0-2-686-di i2c-modules-4.9.0-2-686-di crc-modules-4.9.0-2-686-di crypto-modules-4.9.0-2-686-di crypto-dm-modules-4.9.0-2-686-di efi-modules-4.9.0-2-686-di ata-modules-4.9.0-2-686-di mmc-core-modules-4.9.0-2-686-di mmc-modules-4.9.0-2-686-di nbd-modules-4.9.0-2-686-di squashfs-modules-4.9.0-2-686-di speakup-modules-4.9.0-2-686-di virtio-modules-4.9.0-2-686-di uinput-modules-4.9.0-2-686-di sound-modules-4.9.0-2-686-di hyperv-modules-4.9.0-2-686-di udf-modules-4.9.0-2-686-di fuse-modules-4.9.0-2-686-di kernel-image-4.9.0-2-686-pae-di nic-modules-4.9.0-2-686-pae-di nic-wireless-modules-4.9.0-2-686-pae-di nic-shared-modules-4.9.0-2-686-pae-di serial-modules-4.9.0-2-686-pae-di usb-serial-modules-4.9.0-2-686-pae-di ppp-modules-4.9.0-2-686-pae-di pata-modules-4.9.0-2-686-pae-di cdrom-core-modules-4.9.0-2-686-pae-di firewire-core-modules-4.9.0-2-686-pae-di scsi-core-modules-4.9.0-2-686-pae-di scsi-modules-4.9.0-2-686-pae-di loop-modules-4.9.0-2-686-pae-di btrfs-modules-4.9.0-2-686-pae-di ext4-modules-4.9.0-2-686-pae-di isofs-modules-4.9.0-2-686-pae-di jfs-modules-4.9.0-2-686-pae-di ntfs-modules-4.9.0-2-686-pae-di xfs-modules-4.9.0-2-686-pae-di fat-modules-4.9.0-2-686-pae-di md-modules-4.9.0-2-686-pae-di multipath-modules-4.9.0-2-686-pae-di usb-modules-4.9.0-2-686-pae-di usb-storage-modules-4.9.0-2-686-pae-di pcmcia-storage-modules-4.9.0-2-686-pae-di fb-modules-4.9.0-2-686-pae-di input-modules-4.9.0-2-686-pae-di event-modules-4.9.0-2-686-pae-di mouse-modules-4.9.0-2-686-pae-di nic-pcmcia-modules-4.9.0-2-686-pae-di pcmcia-modules-4.9.0-2-686-pae-di nic-usb-modules-4.9.0-2-686-pae-di sata-modules-4.9.0-2-686-pae-di acpi-modules-4.9.0-2-686-pae-di i2c-modules-4.9.0-2-686-pae-di crc-modules-4.9.0-2-686-pae-di crypto-modules-4.9.0-2-686-pae-di crypto-dm-modules-4.9.0-2-686-pae-di efi-modules-4.9.0-2-686-pae-di ata-modules-4.9.0-2-686-pae-di mmc-core-modules-4.9.0-2-686-pae-di mmc-modules-4.9.0-2-686-pae-di nbd-modules-4.9.0-2-686-pae-di squashfs-modules-4.9.0-2-686-pae-di speakup-modules-4.9.0-2-686-pae-di virtio-modules-4.9.0-2-686-pae-di uinput-modules-4.9.0-2-686-pae-di sound-modules-4.9.0-2-686-pae-di hyperv-modules-4.9.0-2-686-pae-di udf-modules-4.9.0-2-686-pae-di fuse-modules-4.9.0-2-686-pae-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_i386 ABINAME='4.9.0-2' ARCH='i386' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-686-di nic-modules-4.9.0-2-686-di nic-wireless-modules-4.9.0-2-686-di nic-shared-modules-4.9.0-2-686-di serial-modules-4.9.0-2-686-di usb-serial-modules-4.9.0-2-686-di ppp-modules-4.9.0-2-686-di pata-modules-4.9.0-2-686-di cdrom-core-modules-4.9.0-2-686-di firewire-core-modules-4.9.0-2-686-di scsi-core-modules-4.9.0-2-686-di scsi-modules-4.9.0-2-686-di loop-modules-4.9.0-2-686-di btrfs-modules-4.9.0-2-686-di ext4-modules-4.9.0-2-686-di isofs-modules-4.9.0-2-686-di jfs-modules-4.9.0-2-686-di ntfs-modules-4.9.0-2-686-di xfs-modules-4.9.0-2-686-di fat-modules-4.9.0-2-686-di md-modules-4.9.0-2-686-di multipath-modules-4.9.0-2-686-di usb-modules-4.9.0-2-686-di usb-storage-modules-4.9.0-2-686-di pcmcia-storage-modules-4.9.0-2-686-di fb-modules-4.9.0-2-686-di input-modules-4.9.0-2-686-di event-modules-4.9.0-2-686-di mouse-modules-4.9.0-2-686-di nic-pcmcia-modules-4.9.0-2-686-di pcmcia-modules-4.9.0-2-686-di nic-usb-modules-4.9.0-2-686-di sata-modules-4.9.0-2-686-di acpi-modules-4.9.0-2-686-di i2c-modules-4.9.0-2-686-di crc-modules-4.9.0-2-686-di crypto-modules-4.9.0-2-686-di crypto-dm-modules-4.9.0-2-686-di efi-modules-4.9.0-2-686-di ata-modules-4.9.0-2-686-di mmc-core-modules-4.9.0-2-686-di mmc-modules-4.9.0-2-686-di nbd-modules-4.9.0-2-686-di squashfs-modules-4.9.0-2-686-di speakup-modules-4.9.0-2-686-di virtio-modules-4.9.0-2-686-di uinput-modules-4.9.0-2-686-di sound-modules-4.9.0-2-686-di hyperv-modules-4.9.0-2-686-di udf-modules-4.9.0-2-686-di fuse-modules-4.9.0-2-686-di kernel-image-4.9.0-2-686-pae-di nic-modules-4.9.0-2-686-pae-di nic-wireless-modules-4.9.0-2-686-pae-di nic-shared-modules-4.9.0-2-686-pae-di serial-modules-4.9.0-2-686-pae-di usb-serial-modules-4.9.0-2-686-pae-di ppp-modules-4.9.0-2-686-pae-di pata-modules-4.9.0-2-686-pae-di cdrom-core-modules-4.9.0-2-686-pae-di firewire-core-modules-4.9.0-2-686-pae-di scsi-core-modules-4.9.0-2-686-pae-di scsi-modules-4.9.0-2-686-pae-di loop-modules-4.9.0-2-686-pae-di btrfs-modules-4.9.0-2-686-pae-di ext4-modules-4.9.0-2-686-pae-di isofs-modules-4.9.0-2-686-pae-di jfs-modules-4.9.0-2-686-pae-di ntfs-modules-4.9.0-2-686-pae-di xfs-modules-4.9.0-2-686-pae-di fat-modules-4.9.0-2-686-pae-di md-modules-4.9.0-2-686-pae-di multipath-modules-4.9.0-2-686-pae-di usb-modules-4.9.0-2-686-pae-di usb-storage-modules-4.9.0-2-686-pae-di pcmcia-storage-modules-4.9.0-2-686-pae-di fb-modules-4.9.0-2-686-pae-di input-modules-4.9.0-2-686-pae-di event-modules-4.9.0-2-686-pae-di mouse-modules-4.9.0-2-686-pae-di nic-pcmcia-modules-4.9.0-2-686-pae-di pcmcia-modules-4.9.0-2-686-pae-di nic-usb-modules-4.9.0-2-686-pae-di sata-modules-4.9.0-2-686-pae-di acpi-modules-4.9.0-2-686-pae-di i2c-modules-4.9.0-2-686-pae-di crc-modules-4.9.0-2-686-pae-di crypto-modules-4.9.0-2-686-pae-di crypto-dm-modules-4.9.0-2-686-pae-di efi-modules-4.9.0-2-686-pae-di ata-modules-4.9.0-2-686-pae-di mmc-core-modules-4.9.0-2-686-pae-di mmc-modules-4.9.0-2-686-pae-di nbd-modules-4.9.0-2-686-pae-di squashfs-modules-4.9.0-2-686-pae-di speakup-modules-4.9.0-2-686-pae-di virtio-modules-4.9.0-2-686-pae-di uinput-modules-4.9.0-2-686-pae-di sound-modules-4.9.0-2-686-pae-di hyperv-modules-4.9.0-2-686-pae-di udf-modules-4.9.0-2-686-pae-di fuse-modules-4.9.0-2-686-pae-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_i386_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='i386' DH_OPTIONS='-plinux-compiler-gcc-6-x86' binary-arch_i386_none: binary-arch_i386_none_686 binary-arch_i386_none_686-pae binary-arch_i386_none_real binary-arch_i386_none_686: binary-arch_i386_none_686_real binary-arch_i386_none_686-pae: binary-arch_i386_none_686-pae_real binary-arch_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_i386_none_686_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_i386_none_real: binary-arch_i386_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='i386' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_i386_rt: binary-arch_i386_rt_686-pae binary-arch_i386_rt_real binary-arch_i386_rt_686-pae: binary-arch_i386_rt_686-pae_real binary-arch_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_i386_rt_real: binary-arch_m68k:: binary-arch_m68k_none binary-arch_m68k_real binary-arch_m68k:: - $(MAKE) -f debian/rules.real install-udeb_m68k ABINAME='4.9.0-2' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-m68k-di nic-shared-modules-4.9.0-2-m68k-di ppp-modules-4.9.0-2-m68k-di cdrom-core-modules-4.9.0-2-m68k-di scsi-modules-4.9.0-2-m68k-di btrfs-modules-4.9.0-2-m68k-di ext4-modules-4.9.0-2-m68k-di isofs-modules-4.9.0-2-m68k-di fat-modules-4.9.0-2-m68k-di md-modules-4.9.0-2-m68k-di crc-modules-4.9.0-2-m68k-di crypto-modules-4.9.0-2-m68k-di nbd-modules-4.9.0-2-m68k-di squashfs-modules-4.9.0-2-m68k-di zlib-modules-4.9.0-2-m68k-di udf-modules-4.9.0-2-m68k-di fuse-modules-4.9.0-2-m68k-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_m68k ABINAME='4.9.0-2' ARCH='m68k' DO_LIBC='False' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-m68k-di nic-shared-modules-4.9.0-2-m68k-di ppp-modules-4.9.0-2-m68k-di cdrom-core-modules-4.9.0-2-m68k-di scsi-modules-4.9.0-2-m68k-di btrfs-modules-4.9.0-2-m68k-di ext4-modules-4.9.0-2-m68k-di isofs-modules-4.9.0-2-m68k-di fat-modules-4.9.0-2-m68k-di md-modules-4.9.0-2-m68k-di crc-modules-4.9.0-2-m68k-di crypto-modules-4.9.0-2-m68k-di nbd-modules-4.9.0-2-m68k-di squashfs-modules-4.9.0-2-m68k-di zlib-modules-4.9.0-2-m68k-di udf-modules-4.9.0-2-m68k-di fuse-modules-4.9.0-2-m68k-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_m68k_none: binary-arch_m68k_none_m68k binary-arch_m68k_none_real binary-arch_m68k_none_m68k: binary-arch_m68k_none_m68k_real binary-arch_m68k_none_m68k_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_m68k_none_real: binary-arch_m68k_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='m68k' DO_LIBC='False' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips:: binary-arch_mips_none binary-arch_mips_real binary-arch_mips:: - $(MAKE) -f debian/rules.real install-udeb_mips ABINAME='4.9.0-2' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-4kc-malta-di nic-modules-4.9.0-2-4kc-malta-di nic-wireless-modules-4.9.0-2-4kc-malta-di nic-shared-modules-4.9.0-2-4kc-malta-di usb-serial-modules-4.9.0-2-4kc-malta-di ppp-modules-4.9.0-2-4kc-malta-di pata-modules-4.9.0-2-4kc-malta-di cdrom-core-modules-4.9.0-2-4kc-malta-di scsi-core-modules-4.9.0-2-4kc-malta-di scsi-modules-4.9.0-2-4kc-malta-di loop-modules-4.9.0-2-4kc-malta-di btrfs-modules-4.9.0-2-4kc-malta-di ext4-modules-4.9.0-2-4kc-malta-di isofs-modules-4.9.0-2-4kc-malta-di jfs-modules-4.9.0-2-4kc-malta-di ntfs-modules-4.9.0-2-4kc-malta-di xfs-modules-4.9.0-2-4kc-malta-di fat-modules-4.9.0-2-4kc-malta-di hfs-modules-4.9.0-2-4kc-malta-di affs-modules-4.9.0-2-4kc-malta-di minix-modules-4.9.0-2-4kc-malta-di md-modules-4.9.0-2-4kc-malta-di multipath-modules-4.9.0-2-4kc-malta-di usb-modules-4.9.0-2-4kc-malta-di usb-storage-modules-4.9.0-2-4kc-malta-di input-modules-4.9.0-2-4kc-malta-di event-modules-4.9.0-2-4kc-malta-di mouse-modules-4.9.0-2-4kc-malta-di nic-usb-modules-4.9.0-2-4kc-malta-di sata-modules-4.9.0-2-4kc-malta-di i2c-modules-4.9.0-2-4kc-malta-di crc-modules-4.9.0-2-4kc-malta-di crypto-modules-4.9.0-2-4kc-malta-di crypto-dm-modules-4.9.0-2-4kc-malta-di ata-modules-4.9.0-2-4kc-malta-di mmc-core-modules-4.9.0-2-4kc-malta-di mmc-modules-4.9.0-2-4kc-malta-di nbd-modules-4.9.0-2-4kc-malta-di squashfs-modules-4.9.0-2-4kc-malta-di virtio-modules-4.9.0-2-4kc-malta-di sound-modules-4.9.0-2-4kc-malta-di zlib-modules-4.9.0-2-4kc-malta-di udf-modules-4.9.0-2-4kc-malta-di fuse-modules-4.9.0-2-4kc-malta-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_mips ABINAME='4.9.0-2' ARCH='mips' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-4kc-malta-di nic-modules-4.9.0-2-4kc-malta-di nic-wireless-modules-4.9.0-2-4kc-malta-di nic-shared-modules-4.9.0-2-4kc-malta-di usb-serial-modules-4.9.0-2-4kc-malta-di ppp-modules-4.9.0-2-4kc-malta-di pata-modules-4.9.0-2-4kc-malta-di cdrom-core-modules-4.9.0-2-4kc-malta-di scsi-core-modules-4.9.0-2-4kc-malta-di scsi-modules-4.9.0-2-4kc-malta-di loop-modules-4.9.0-2-4kc-malta-di btrfs-modules-4.9.0-2-4kc-malta-di ext4-modules-4.9.0-2-4kc-malta-di isofs-modules-4.9.0-2-4kc-malta-di jfs-modules-4.9.0-2-4kc-malta-di ntfs-modules-4.9.0-2-4kc-malta-di xfs-modules-4.9.0-2-4kc-malta-di fat-modules-4.9.0-2-4kc-malta-di hfs-modules-4.9.0-2-4kc-malta-di affs-modules-4.9.0-2-4kc-malta-di minix-modules-4.9.0-2-4kc-malta-di md-modules-4.9.0-2-4kc-malta-di multipath-modules-4.9.0-2-4kc-malta-di usb-modules-4.9.0-2-4kc-malta-di usb-storage-modules-4.9.0-2-4kc-malta-di input-modules-4.9.0-2-4kc-malta-di event-modules-4.9.0-2-4kc-malta-di mouse-modules-4.9.0-2-4kc-malta-di nic-usb-modules-4.9.0-2-4kc-malta-di sata-modules-4.9.0-2-4kc-malta-di i2c-modules-4.9.0-2-4kc-malta-di crc-modules-4.9.0-2-4kc-malta-di crypto-modules-4.9.0-2-4kc-malta-di crypto-dm-modules-4.9.0-2-4kc-malta-di ata-modules-4.9.0-2-4kc-malta-di mmc-core-modules-4.9.0-2-4kc-malta-di mmc-modules-4.9.0-2-4kc-malta-di nbd-modules-4.9.0-2-4kc-malta-di squashfs-modules-4.9.0-2-4kc-malta-di virtio-modules-4.9.0-2-4kc-malta-di sound-modules-4.9.0-2-4kc-malta-di zlib-modules-4.9.0-2-4kc-malta-di udf-modules-4.9.0-2-4kc-malta-di fuse-modules-4.9.0-2-4kc-malta-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_mips64:: binary-arch_mips64_none binary-arch_mips64_real binary-arch_mips64:: - $(MAKE) -f debian/rules.real install-udeb_mips64 ABINAME='4.9.0-2' ARCH='mips64' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-5kc-malta-di nic-modules-4.9.0-2-5kc-malta-di nic-wireless-modules-4.9.0-2-5kc-malta-di nic-shared-modules-4.9.0-2-5kc-malta-di usb-serial-modules-4.9.0-2-5kc-malta-di ppp-modules-4.9.0-2-5kc-malta-di pata-modules-4.9.0-2-5kc-malta-di cdrom-core-modules-4.9.0-2-5kc-malta-di scsi-core-modules-4.9.0-2-5kc-malta-di scsi-modules-4.9.0-2-5kc-malta-di loop-modules-4.9.0-2-5kc-malta-di btrfs-modules-4.9.0-2-5kc-malta-di ext4-modules-4.9.0-2-5kc-malta-di isofs-modules-4.9.0-2-5kc-malta-di jfs-modules-4.9.0-2-5kc-malta-di ntfs-modules-4.9.0-2-5kc-malta-di xfs-modules-4.9.0-2-5kc-malta-di fat-modules-4.9.0-2-5kc-malta-di hfs-modules-4.9.0-2-5kc-malta-di affs-modules-4.9.0-2-5kc-malta-di minix-modules-4.9.0-2-5kc-malta-di md-modules-4.9.0-2-5kc-malta-di multipath-modules-4.9.0-2-5kc-malta-di usb-modules-4.9.0-2-5kc-malta-di usb-storage-modules-4.9.0-2-5kc-malta-di input-modules-4.9.0-2-5kc-malta-di event-modules-4.9.0-2-5kc-malta-di mouse-modules-4.9.0-2-5kc-malta-di nic-usb-modules-4.9.0-2-5kc-malta-di sata-modules-4.9.0-2-5kc-malta-di i2c-modules-4.9.0-2-5kc-malta-di crc-modules-4.9.0-2-5kc-malta-di crypto-modules-4.9.0-2-5kc-malta-di crypto-dm-modules-4.9.0-2-5kc-malta-di ata-modules-4.9.0-2-5kc-malta-di mmc-core-modules-4.9.0-2-5kc-malta-di mmc-modules-4.9.0-2-5kc-malta-di nbd-modules-4.9.0-2-5kc-malta-di squashfs-modules-4.9.0-2-5kc-malta-di virtio-modules-4.9.0-2-5kc-malta-di sound-modules-4.9.0-2-5kc-malta-di zlib-modules-4.9.0-2-5kc-malta-di udf-modules-4.9.0-2-5kc-malta-di fuse-modules-4.9.0-2-5kc-malta-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_mips64 ABINAME='4.9.0-2' ARCH='mips64' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-5kc-malta-di nic-modules-4.9.0-2-5kc-malta-di nic-wireless-modules-4.9.0-2-5kc-malta-di nic-shared-modules-4.9.0-2-5kc-malta-di usb-serial-modules-4.9.0-2-5kc-malta-di ppp-modules-4.9.0-2-5kc-malta-di pata-modules-4.9.0-2-5kc-malta-di cdrom-core-modules-4.9.0-2-5kc-malta-di scsi-core-modules-4.9.0-2-5kc-malta-di scsi-modules-4.9.0-2-5kc-malta-di loop-modules-4.9.0-2-5kc-malta-di btrfs-modules-4.9.0-2-5kc-malta-di ext4-modules-4.9.0-2-5kc-malta-di isofs-modules-4.9.0-2-5kc-malta-di jfs-modules-4.9.0-2-5kc-malta-di ntfs-modules-4.9.0-2-5kc-malta-di xfs-modules-4.9.0-2-5kc-malta-di fat-modules-4.9.0-2-5kc-malta-di hfs-modules-4.9.0-2-5kc-malta-di affs-modules-4.9.0-2-5kc-malta-di minix-modules-4.9.0-2-5kc-malta-di md-modules-4.9.0-2-5kc-malta-di multipath-modules-4.9.0-2-5kc-malta-di usb-modules-4.9.0-2-5kc-malta-di usb-storage-modules-4.9.0-2-5kc-malta-di input-modules-4.9.0-2-5kc-malta-di event-modules-4.9.0-2-5kc-malta-di mouse-modules-4.9.0-2-5kc-malta-di nic-usb-modules-4.9.0-2-5kc-malta-di sata-modules-4.9.0-2-5kc-malta-di i2c-modules-4.9.0-2-5kc-malta-di crc-modules-4.9.0-2-5kc-malta-di crypto-modules-4.9.0-2-5kc-malta-di crypto-dm-modules-4.9.0-2-5kc-malta-di ata-modules-4.9.0-2-5kc-malta-di mmc-core-modules-4.9.0-2-5kc-malta-di mmc-modules-4.9.0-2-5kc-malta-di nbd-modules-4.9.0-2-5kc-malta-di squashfs-modules-4.9.0-2-5kc-malta-di virtio-modules-4.9.0-2-5kc-malta-di sound-modules-4.9.0-2-5kc-malta-di zlib-modules-4.9.0-2-5kc-malta-di udf-modules-4.9.0-2-5kc-malta-di fuse-modules-4.9.0-2-5kc-malta-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_mips64_none: binary-arch_mips64_none_5kc-malta binary-arch_mips64_none_octeon binary-arch_mips64_none_real binary-arch_mips64_none_5kc-malta: binary-arch_mips64_none_5kc-malta_real binary-arch_mips64_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64_none_octeon: binary-arch_mips64_none_octeon_real binary-arch_mips64_none_octeon_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64_none_real: binary-arch_mips64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips64' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips64' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64el:: binary-arch_mips64el_none binary-arch_mips64el_real binary-arch_mips64el:: - $(MAKE) -f debian/rules.real install-udeb_mips64el ABINAME='4.9.0-2' ARCH='mips64el' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-5kc-malta-di nic-modules-4.9.0-2-5kc-malta-di nic-wireless-modules-4.9.0-2-5kc-malta-di nic-shared-modules-4.9.0-2-5kc-malta-di usb-serial-modules-4.9.0-2-5kc-malta-di ppp-modules-4.9.0-2-5kc-malta-di pata-modules-4.9.0-2-5kc-malta-di cdrom-core-modules-4.9.0-2-5kc-malta-di scsi-core-modules-4.9.0-2-5kc-malta-di scsi-modules-4.9.0-2-5kc-malta-di loop-modules-4.9.0-2-5kc-malta-di btrfs-modules-4.9.0-2-5kc-malta-di ext4-modules-4.9.0-2-5kc-malta-di isofs-modules-4.9.0-2-5kc-malta-di jfs-modules-4.9.0-2-5kc-malta-di ntfs-modules-4.9.0-2-5kc-malta-di xfs-modules-4.9.0-2-5kc-malta-di fat-modules-4.9.0-2-5kc-malta-di hfs-modules-4.9.0-2-5kc-malta-di affs-modules-4.9.0-2-5kc-malta-di minix-modules-4.9.0-2-5kc-malta-di md-modules-4.9.0-2-5kc-malta-di multipath-modules-4.9.0-2-5kc-malta-di usb-modules-4.9.0-2-5kc-malta-di usb-storage-modules-4.9.0-2-5kc-malta-di input-modules-4.9.0-2-5kc-malta-di event-modules-4.9.0-2-5kc-malta-di mouse-modules-4.9.0-2-5kc-malta-di nic-usb-modules-4.9.0-2-5kc-malta-di sata-modules-4.9.0-2-5kc-malta-di i2c-modules-4.9.0-2-5kc-malta-di crc-modules-4.9.0-2-5kc-malta-di crypto-modules-4.9.0-2-5kc-malta-di crypto-dm-modules-4.9.0-2-5kc-malta-di ata-modules-4.9.0-2-5kc-malta-di mmc-core-modules-4.9.0-2-5kc-malta-di mmc-modules-4.9.0-2-5kc-malta-di nbd-modules-4.9.0-2-5kc-malta-di squashfs-modules-4.9.0-2-5kc-malta-di virtio-modules-4.9.0-2-5kc-malta-di sound-modules-4.9.0-2-5kc-malta-di zlib-modules-4.9.0-2-5kc-malta-di udf-modules-4.9.0-2-5kc-malta-di fuse-modules-4.9.0-2-5kc-malta-di kernel-image-4.9.0-2-loongson-3-di nic-modules-4.9.0-2-loongson-3-di nic-wireless-modules-4.9.0-2-loongson-3-di nic-shared-modules-4.9.0-2-loongson-3-di usb-serial-modules-4.9.0-2-loongson-3-di ppp-modules-4.9.0-2-loongson-3-di pata-modules-4.9.0-2-loongson-3-di cdrom-core-modules-4.9.0-2-loongson-3-di firewire-core-modules-4.9.0-2-loongson-3-di scsi-core-modules-4.9.0-2-loongson-3-di scsi-modules-4.9.0-2-loongson-3-di loop-modules-4.9.0-2-loongson-3-di btrfs-modules-4.9.0-2-loongson-3-di ext4-modules-4.9.0-2-loongson-3-di isofs-modules-4.9.0-2-loongson-3-di jfs-modules-4.9.0-2-loongson-3-di ntfs-modules-4.9.0-2-loongson-3-di xfs-modules-4.9.0-2-loongson-3-di fat-modules-4.9.0-2-loongson-3-di hfs-modules-4.9.0-2-loongson-3-di affs-modules-4.9.0-2-loongson-3-di minix-modules-4.9.0-2-loongson-3-di nfs-modules-4.9.0-2-loongson-3-di md-modules-4.9.0-2-loongson-3-di multipath-modules-4.9.0-2-loongson-3-di usb-modules-4.9.0-2-loongson-3-di usb-storage-modules-4.9.0-2-loongson-3-di fb-modules-4.9.0-2-loongson-3-di input-modules-4.9.0-2-loongson-3-di event-modules-4.9.0-2-loongson-3-di nic-usb-modules-4.9.0-2-loongson-3-di sata-modules-4.9.0-2-loongson-3-di crc-modules-4.9.0-2-loongson-3-di crypto-modules-4.9.0-2-loongson-3-di crypto-dm-modules-4.9.0-2-loongson-3-di ata-modules-4.9.0-2-loongson-3-di nbd-modules-4.9.0-2-loongson-3-di squashfs-modules-4.9.0-2-loongson-3-di speakup-modules-4.9.0-2-loongson-3-di virtio-modules-4.9.0-2-loongson-3-di sound-modules-4.9.0-2-loongson-3-di zlib-modules-4.9.0-2-loongson-3-di udf-modules-4.9.0-2-loongson-3-di fuse-modules-4.9.0-2-loongson-3-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_mips64el ABINAME='4.9.0-2' ARCH='mips64el' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-5kc-malta-di nic-modules-4.9.0-2-5kc-malta-di nic-wireless-modules-4.9.0-2-5kc-malta-di nic-shared-modules-4.9.0-2-5kc-malta-di usb-serial-modules-4.9.0-2-5kc-malta-di ppp-modules-4.9.0-2-5kc-malta-di pata-modules-4.9.0-2-5kc-malta-di cdrom-core-modules-4.9.0-2-5kc-malta-di scsi-core-modules-4.9.0-2-5kc-malta-di scsi-modules-4.9.0-2-5kc-malta-di loop-modules-4.9.0-2-5kc-malta-di btrfs-modules-4.9.0-2-5kc-malta-di ext4-modules-4.9.0-2-5kc-malta-di isofs-modules-4.9.0-2-5kc-malta-di jfs-modules-4.9.0-2-5kc-malta-di ntfs-modules-4.9.0-2-5kc-malta-di xfs-modules-4.9.0-2-5kc-malta-di fat-modules-4.9.0-2-5kc-malta-di hfs-modules-4.9.0-2-5kc-malta-di affs-modules-4.9.0-2-5kc-malta-di minix-modules-4.9.0-2-5kc-malta-di md-modules-4.9.0-2-5kc-malta-di multipath-modules-4.9.0-2-5kc-malta-di usb-modules-4.9.0-2-5kc-malta-di usb-storage-modules-4.9.0-2-5kc-malta-di input-modules-4.9.0-2-5kc-malta-di event-modules-4.9.0-2-5kc-malta-di mouse-modules-4.9.0-2-5kc-malta-di nic-usb-modules-4.9.0-2-5kc-malta-di sata-modules-4.9.0-2-5kc-malta-di i2c-modules-4.9.0-2-5kc-malta-di crc-modules-4.9.0-2-5kc-malta-di crypto-modules-4.9.0-2-5kc-malta-di crypto-dm-modules-4.9.0-2-5kc-malta-di ata-modules-4.9.0-2-5kc-malta-di mmc-core-modules-4.9.0-2-5kc-malta-di mmc-modules-4.9.0-2-5kc-malta-di nbd-modules-4.9.0-2-5kc-malta-di squashfs-modules-4.9.0-2-5kc-malta-di virtio-modules-4.9.0-2-5kc-malta-di sound-modules-4.9.0-2-5kc-malta-di zlib-modules-4.9.0-2-5kc-malta-di udf-modules-4.9.0-2-5kc-malta-di fuse-modules-4.9.0-2-5kc-malta-di kernel-image-4.9.0-2-loongson-3-di nic-modules-4.9.0-2-loongson-3-di nic-wireless-modules-4.9.0-2-loongson-3-di nic-shared-modules-4.9.0-2-loongson-3-di usb-serial-modules-4.9.0-2-loongson-3-di ppp-modules-4.9.0-2-loongson-3-di pata-modules-4.9.0-2-loongson-3-di cdrom-core-modules-4.9.0-2-loongson-3-di firewire-core-modules-4.9.0-2-loongson-3-di scsi-core-modules-4.9.0-2-loongson-3-di scsi-modules-4.9.0-2-loongson-3-di loop-modules-4.9.0-2-loongson-3-di btrfs-modules-4.9.0-2-loongson-3-di ext4-modules-4.9.0-2-loongson-3-di isofs-modules-4.9.0-2-loongson-3-di jfs-modules-4.9.0-2-loongson-3-di ntfs-modules-4.9.0-2-loongson-3-di xfs-modules-4.9.0-2-loongson-3-di fat-modules-4.9.0-2-loongson-3-di hfs-modules-4.9.0-2-loongson-3-di affs-modules-4.9.0-2-loongson-3-di minix-modules-4.9.0-2-loongson-3-di nfs-modules-4.9.0-2-loongson-3-di md-modules-4.9.0-2-loongson-3-di multipath-modules-4.9.0-2-loongson-3-di usb-modules-4.9.0-2-loongson-3-di usb-storage-modules-4.9.0-2-loongson-3-di fb-modules-4.9.0-2-loongson-3-di input-modules-4.9.0-2-loongson-3-di event-modules-4.9.0-2-loongson-3-di nic-usb-modules-4.9.0-2-loongson-3-di sata-modules-4.9.0-2-loongson-3-di crc-modules-4.9.0-2-loongson-3-di crypto-modules-4.9.0-2-loongson-3-di crypto-dm-modules-4.9.0-2-loongson-3-di ata-modules-4.9.0-2-loongson-3-di nbd-modules-4.9.0-2-loongson-3-di squashfs-modules-4.9.0-2-loongson-3-di speakup-modules-4.9.0-2-loongson-3-di virtio-modules-4.9.0-2-loongson-3-di sound-modules-4.9.0-2-loongson-3-di zlib-modules-4.9.0-2-loongson-3-di udf-modules-4.9.0-2-loongson-3-di fuse-modules-4.9.0-2-loongson-3-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_mips64el_none: binary-arch_mips64el_none_5kc-malta binary-arch_mips64el_none_loongson-3 binary-arch_mips64el_none_octeon binary-arch_mips64el_none_real binary-arch_mips64el_none_5kc-malta: binary-arch_mips64el_none_5kc-malta_real binary-arch_mips64el_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64el_none_loongson-3: binary-arch_mips64el_none_loongson-3_real binary-arch_mips64el_none_loongson-3_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64el_none_octeon: binary-arch_mips64el_none_octeon_real binary-arch_mips64el_none_octeon_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips64el_none_real: binary-arch_mips64el_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips64el' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips64el' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips_none: binary-arch_mips_none_4kc-malta binary-arch_mips_none_5kc-malta binary-arch_mips_none_octeon binary-arch_mips_none_real binary-arch_mips_none_4kc-malta: binary-arch_mips_none_4kc-malta_real binary-arch_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips_none_5kc-malta: binary-arch_mips_none_5kc-malta_real binary-arch_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips_none_octeon: binary-arch_mips_none_octeon_real binary-arch_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mips_none_real: binary-arch_mips_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mips' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsel:: binary-arch_mipsel_none binary-arch_mipsel_real binary-arch_mipsel:: - $(MAKE) -f debian/rules.real install-udeb_mipsel ABINAME='4.9.0-2' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-4kc-malta-di nic-modules-4.9.0-2-4kc-malta-di nic-wireless-modules-4.9.0-2-4kc-malta-di nic-shared-modules-4.9.0-2-4kc-malta-di usb-serial-modules-4.9.0-2-4kc-malta-di ppp-modules-4.9.0-2-4kc-malta-di pata-modules-4.9.0-2-4kc-malta-di cdrom-core-modules-4.9.0-2-4kc-malta-di scsi-core-modules-4.9.0-2-4kc-malta-di scsi-modules-4.9.0-2-4kc-malta-di loop-modules-4.9.0-2-4kc-malta-di btrfs-modules-4.9.0-2-4kc-malta-di ext4-modules-4.9.0-2-4kc-malta-di isofs-modules-4.9.0-2-4kc-malta-di jfs-modules-4.9.0-2-4kc-malta-di ntfs-modules-4.9.0-2-4kc-malta-di xfs-modules-4.9.0-2-4kc-malta-di fat-modules-4.9.0-2-4kc-malta-di hfs-modules-4.9.0-2-4kc-malta-di affs-modules-4.9.0-2-4kc-malta-di minix-modules-4.9.0-2-4kc-malta-di md-modules-4.9.0-2-4kc-malta-di multipath-modules-4.9.0-2-4kc-malta-di usb-modules-4.9.0-2-4kc-malta-di usb-storage-modules-4.9.0-2-4kc-malta-di input-modules-4.9.0-2-4kc-malta-di event-modules-4.9.0-2-4kc-malta-di mouse-modules-4.9.0-2-4kc-malta-di nic-usb-modules-4.9.0-2-4kc-malta-di sata-modules-4.9.0-2-4kc-malta-di i2c-modules-4.9.0-2-4kc-malta-di crc-modules-4.9.0-2-4kc-malta-di crypto-modules-4.9.0-2-4kc-malta-di crypto-dm-modules-4.9.0-2-4kc-malta-di ata-modules-4.9.0-2-4kc-malta-di mmc-core-modules-4.9.0-2-4kc-malta-di mmc-modules-4.9.0-2-4kc-malta-di nbd-modules-4.9.0-2-4kc-malta-di squashfs-modules-4.9.0-2-4kc-malta-di virtio-modules-4.9.0-2-4kc-malta-di sound-modules-4.9.0-2-4kc-malta-di zlib-modules-4.9.0-2-4kc-malta-di udf-modules-4.9.0-2-4kc-malta-di fuse-modules-4.9.0-2-4kc-malta-di kernel-image-4.9.0-2-loongson-3-di nic-modules-4.9.0-2-loongson-3-di nic-wireless-modules-4.9.0-2-loongson-3-di nic-shared-modules-4.9.0-2-loongson-3-di usb-serial-modules-4.9.0-2-loongson-3-di ppp-modules-4.9.0-2-loongson-3-di pata-modules-4.9.0-2-loongson-3-di cdrom-core-modules-4.9.0-2-loongson-3-di firewire-core-modules-4.9.0-2-loongson-3-di scsi-core-modules-4.9.0-2-loongson-3-di scsi-modules-4.9.0-2-loongson-3-di loop-modules-4.9.0-2-loongson-3-di btrfs-modules-4.9.0-2-loongson-3-di ext4-modules-4.9.0-2-loongson-3-di isofs-modules-4.9.0-2-loongson-3-di jfs-modules-4.9.0-2-loongson-3-di ntfs-modules-4.9.0-2-loongson-3-di xfs-modules-4.9.0-2-loongson-3-di fat-modules-4.9.0-2-loongson-3-di hfs-modules-4.9.0-2-loongson-3-di affs-modules-4.9.0-2-loongson-3-di minix-modules-4.9.0-2-loongson-3-di nfs-modules-4.9.0-2-loongson-3-di md-modules-4.9.0-2-loongson-3-di multipath-modules-4.9.0-2-loongson-3-di usb-modules-4.9.0-2-loongson-3-di usb-storage-modules-4.9.0-2-loongson-3-di fb-modules-4.9.0-2-loongson-3-di input-modules-4.9.0-2-loongson-3-di event-modules-4.9.0-2-loongson-3-di nic-usb-modules-4.9.0-2-loongson-3-di sata-modules-4.9.0-2-loongson-3-di crc-modules-4.9.0-2-loongson-3-di crypto-modules-4.9.0-2-loongson-3-di crypto-dm-modules-4.9.0-2-loongson-3-di ata-modules-4.9.0-2-loongson-3-di nbd-modules-4.9.0-2-loongson-3-di squashfs-modules-4.9.0-2-loongson-3-di speakup-modules-4.9.0-2-loongson-3-di virtio-modules-4.9.0-2-loongson-3-di sound-modules-4.9.0-2-loongson-3-di zlib-modules-4.9.0-2-loongson-3-di udf-modules-4.9.0-2-loongson-3-di fuse-modules-4.9.0-2-loongson-3-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_mipsel ABINAME='4.9.0-2' ARCH='mipsel' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-4kc-malta-di nic-modules-4.9.0-2-4kc-malta-di nic-wireless-modules-4.9.0-2-4kc-malta-di nic-shared-modules-4.9.0-2-4kc-malta-di usb-serial-modules-4.9.0-2-4kc-malta-di ppp-modules-4.9.0-2-4kc-malta-di pata-modules-4.9.0-2-4kc-malta-di cdrom-core-modules-4.9.0-2-4kc-malta-di scsi-core-modules-4.9.0-2-4kc-malta-di scsi-modules-4.9.0-2-4kc-malta-di loop-modules-4.9.0-2-4kc-malta-di btrfs-modules-4.9.0-2-4kc-malta-di ext4-modules-4.9.0-2-4kc-malta-di isofs-modules-4.9.0-2-4kc-malta-di jfs-modules-4.9.0-2-4kc-malta-di ntfs-modules-4.9.0-2-4kc-malta-di xfs-modules-4.9.0-2-4kc-malta-di fat-modules-4.9.0-2-4kc-malta-di hfs-modules-4.9.0-2-4kc-malta-di affs-modules-4.9.0-2-4kc-malta-di minix-modules-4.9.0-2-4kc-malta-di md-modules-4.9.0-2-4kc-malta-di multipath-modules-4.9.0-2-4kc-malta-di usb-modules-4.9.0-2-4kc-malta-di usb-storage-modules-4.9.0-2-4kc-malta-di input-modules-4.9.0-2-4kc-malta-di event-modules-4.9.0-2-4kc-malta-di mouse-modules-4.9.0-2-4kc-malta-di nic-usb-modules-4.9.0-2-4kc-malta-di sata-modules-4.9.0-2-4kc-malta-di i2c-modules-4.9.0-2-4kc-malta-di crc-modules-4.9.0-2-4kc-malta-di crypto-modules-4.9.0-2-4kc-malta-di crypto-dm-modules-4.9.0-2-4kc-malta-di ata-modules-4.9.0-2-4kc-malta-di mmc-core-modules-4.9.0-2-4kc-malta-di mmc-modules-4.9.0-2-4kc-malta-di nbd-modules-4.9.0-2-4kc-malta-di squashfs-modules-4.9.0-2-4kc-malta-di virtio-modules-4.9.0-2-4kc-malta-di sound-modules-4.9.0-2-4kc-malta-di zlib-modules-4.9.0-2-4kc-malta-di udf-modules-4.9.0-2-4kc-malta-di fuse-modules-4.9.0-2-4kc-malta-di kernel-image-4.9.0-2-loongson-3-di nic-modules-4.9.0-2-loongson-3-di nic-wireless-modules-4.9.0-2-loongson-3-di nic-shared-modules-4.9.0-2-loongson-3-di usb-serial-modules-4.9.0-2-loongson-3-di ppp-modules-4.9.0-2-loongson-3-di pata-modules-4.9.0-2-loongson-3-di cdrom-core-modules-4.9.0-2-loongson-3-di firewire-core-modules-4.9.0-2-loongson-3-di scsi-core-modules-4.9.0-2-loongson-3-di scsi-modules-4.9.0-2-loongson-3-di loop-modules-4.9.0-2-loongson-3-di btrfs-modules-4.9.0-2-loongson-3-di ext4-modules-4.9.0-2-loongson-3-di isofs-modules-4.9.0-2-loongson-3-di jfs-modules-4.9.0-2-loongson-3-di ntfs-modules-4.9.0-2-loongson-3-di xfs-modules-4.9.0-2-loongson-3-di fat-modules-4.9.0-2-loongson-3-di hfs-modules-4.9.0-2-loongson-3-di affs-modules-4.9.0-2-loongson-3-di minix-modules-4.9.0-2-loongson-3-di nfs-modules-4.9.0-2-loongson-3-di md-modules-4.9.0-2-loongson-3-di multipath-modules-4.9.0-2-loongson-3-di usb-modules-4.9.0-2-loongson-3-di usb-storage-modules-4.9.0-2-loongson-3-di fb-modules-4.9.0-2-loongson-3-di input-modules-4.9.0-2-loongson-3-di event-modules-4.9.0-2-loongson-3-di nic-usb-modules-4.9.0-2-loongson-3-di sata-modules-4.9.0-2-loongson-3-di crc-modules-4.9.0-2-loongson-3-di crypto-modules-4.9.0-2-loongson-3-di crypto-dm-modules-4.9.0-2-loongson-3-di ata-modules-4.9.0-2-loongson-3-di nbd-modules-4.9.0-2-loongson-3-di squashfs-modules-4.9.0-2-loongson-3-di speakup-modules-4.9.0-2-loongson-3-di virtio-modules-4.9.0-2-loongson-3-di sound-modules-4.9.0-2-loongson-3-di zlib-modules-4.9.0-2-loongson-3-di udf-modules-4.9.0-2-loongson-3-di fuse-modules-4.9.0-2-loongson-3-di kernel-image-4.9.0-2-octeon-di nic-modules-4.9.0-2-octeon-di nic-wireless-modules-4.9.0-2-octeon-di nic-shared-modules-4.9.0-2-octeon-di usb-serial-modules-4.9.0-2-octeon-di ppp-modules-4.9.0-2-octeon-di pata-modules-4.9.0-2-octeon-di cdrom-core-modules-4.9.0-2-octeon-di scsi-core-modules-4.9.0-2-octeon-di scsi-modules-4.9.0-2-octeon-di loop-modules-4.9.0-2-octeon-di btrfs-modules-4.9.0-2-octeon-di ext4-modules-4.9.0-2-octeon-di isofs-modules-4.9.0-2-octeon-di jfs-modules-4.9.0-2-octeon-di ntfs-modules-4.9.0-2-octeon-di xfs-modules-4.9.0-2-octeon-di fat-modules-4.9.0-2-octeon-di hfs-modules-4.9.0-2-octeon-di affs-modules-4.9.0-2-octeon-di minix-modules-4.9.0-2-octeon-di md-modules-4.9.0-2-octeon-di multipath-modules-4.9.0-2-octeon-di usb-modules-4.9.0-2-octeon-di usb-storage-modules-4.9.0-2-octeon-di input-modules-4.9.0-2-octeon-di event-modules-4.9.0-2-octeon-di nic-usb-modules-4.9.0-2-octeon-di sata-modules-4.9.0-2-octeon-di crc-modules-4.9.0-2-octeon-di crypto-modules-4.9.0-2-octeon-di crypto-dm-modules-4.9.0-2-octeon-di nbd-modules-4.9.0-2-octeon-di squashfs-modules-4.9.0-2-octeon-di rtc-modules-4.9.0-2-octeon-di virtio-modules-4.9.0-2-octeon-di sound-modules-4.9.0-2-octeon-di zlib-modules-4.9.0-2-octeon-di udf-modules-4.9.0-2-octeon-di fuse-modules-4.9.0-2-octeon-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_mipsel_none: binary-arch_mipsel_none_4kc-malta binary-arch_mipsel_none_5kc-malta binary-arch_mipsel_none_loongson-3 binary-arch_mipsel_none_octeon binary-arch_mipsel_none_real binary-arch_mipsel_none_4kc-malta: binary-arch_mipsel_none_4kc-malta_real binary-arch_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsel_none_5kc-malta: binary-arch_mipsel_none_5kc-malta_real binary-arch_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsel_none_loongson-3: binary-arch_mipsel_none_loongson-3_real binary-arch_mipsel_none_loongson-3_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsel_none_octeon: binary-arch_mipsel_none_octeon_real binary-arch_mipsel_none_octeon_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsel_none_real: binary-arch_mipsel_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsel' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsn32: binary-arch_mipsn32_real binary-arch_mipsn32_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_mipsn32el: binary-arch_mipsn32el_real binary-arch_mipsn32el_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_powerpc:: binary-arch_powerpc_none binary-arch_powerpc_real binary-arch_powerpc:: - $(MAKE) -f debian/rules.real install-udeb_powerpc ABINAME='4.9.0-2' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc-di nic-modules-4.9.0-2-powerpc-di nic-shared-modules-4.9.0-2-powerpc-di serial-modules-4.9.0-2-powerpc-di usb-serial-modules-4.9.0-2-powerpc-di ppp-modules-4.9.0-2-powerpc-di pata-modules-4.9.0-2-powerpc-di cdrom-core-modules-4.9.0-2-powerpc-di firewire-core-modules-4.9.0-2-powerpc-di scsi-core-modules-4.9.0-2-powerpc-di scsi-modules-4.9.0-2-powerpc-di loop-modules-4.9.0-2-powerpc-di btrfs-modules-4.9.0-2-powerpc-di ext4-modules-4.9.0-2-powerpc-di isofs-modules-4.9.0-2-powerpc-di jfs-modules-4.9.0-2-powerpc-di xfs-modules-4.9.0-2-powerpc-di fat-modules-4.9.0-2-powerpc-di hfs-modules-4.9.0-2-powerpc-di affs-modules-4.9.0-2-powerpc-di md-modules-4.9.0-2-powerpc-di multipath-modules-4.9.0-2-powerpc-di usb-modules-4.9.0-2-powerpc-di usb-storage-modules-4.9.0-2-powerpc-di pcmcia-storage-modules-4.9.0-2-powerpc-di fb-modules-4.9.0-2-powerpc-di input-modules-4.9.0-2-powerpc-di event-modules-4.9.0-2-powerpc-di mouse-modules-4.9.0-2-powerpc-di nic-pcmcia-modules-4.9.0-2-powerpc-di pcmcia-modules-4.9.0-2-powerpc-di sata-modules-4.9.0-2-powerpc-di crc-modules-4.9.0-2-powerpc-di crypto-modules-4.9.0-2-powerpc-di crypto-dm-modules-4.9.0-2-powerpc-di ata-modules-4.9.0-2-powerpc-di nbd-modules-4.9.0-2-powerpc-di squashfs-modules-4.9.0-2-powerpc-di virtio-modules-4.9.0-2-powerpc-di uinput-modules-4.9.0-2-powerpc-di zlib-modules-4.9.0-2-powerpc-di udf-modules-4.9.0-2-powerpc-di fuse-modules-4.9.0-2-powerpc-di kernel-image-4.9.0-2-powerpc64-di nic-modules-4.9.0-2-powerpc64-di nic-shared-modules-4.9.0-2-powerpc64-di serial-modules-4.9.0-2-powerpc64-di usb-serial-modules-4.9.0-2-powerpc64-di ppp-modules-4.9.0-2-powerpc64-di pata-modules-4.9.0-2-powerpc64-di cdrom-core-modules-4.9.0-2-powerpc64-di firewire-core-modules-4.9.0-2-powerpc64-di scsi-core-modules-4.9.0-2-powerpc64-di scsi-modules-4.9.0-2-powerpc64-di loop-modules-4.9.0-2-powerpc64-di btrfs-modules-4.9.0-2-powerpc64-di ext4-modules-4.9.0-2-powerpc64-di isofs-modules-4.9.0-2-powerpc64-di jfs-modules-4.9.0-2-powerpc64-di xfs-modules-4.9.0-2-powerpc64-di fat-modules-4.9.0-2-powerpc64-di hfs-modules-4.9.0-2-powerpc64-di affs-modules-4.9.0-2-powerpc64-di md-modules-4.9.0-2-powerpc64-di multipath-modules-4.9.0-2-powerpc64-di usb-modules-4.9.0-2-powerpc64-di usb-storage-modules-4.9.0-2-powerpc64-di pcmcia-storage-modules-4.9.0-2-powerpc64-di input-modules-4.9.0-2-powerpc64-di event-modules-4.9.0-2-powerpc64-di mouse-modules-4.9.0-2-powerpc64-di nic-pcmcia-modules-4.9.0-2-powerpc64-di pcmcia-modules-4.9.0-2-powerpc64-di sata-modules-4.9.0-2-powerpc64-di crc-modules-4.9.0-2-powerpc64-di crypto-modules-4.9.0-2-powerpc64-di crypto-dm-modules-4.9.0-2-powerpc64-di ata-modules-4.9.0-2-powerpc64-di nbd-modules-4.9.0-2-powerpc64-di squashfs-modules-4.9.0-2-powerpc64-di virtio-modules-4.9.0-2-powerpc64-di uinput-modules-4.9.0-2-powerpc64-di udf-modules-4.9.0-2-powerpc64-di fuse-modules-4.9.0-2-powerpc64-di hypervisor-modules-4.9.0-2-powerpc64-di fancontrol-modules-4.9.0-2-powerpc64-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_powerpc ABINAME='4.9.0-2' ARCH='powerpc' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc-di nic-modules-4.9.0-2-powerpc-di nic-shared-modules-4.9.0-2-powerpc-di serial-modules-4.9.0-2-powerpc-di usb-serial-modules-4.9.0-2-powerpc-di ppp-modules-4.9.0-2-powerpc-di pata-modules-4.9.0-2-powerpc-di cdrom-core-modules-4.9.0-2-powerpc-di firewire-core-modules-4.9.0-2-powerpc-di scsi-core-modules-4.9.0-2-powerpc-di scsi-modules-4.9.0-2-powerpc-di loop-modules-4.9.0-2-powerpc-di btrfs-modules-4.9.0-2-powerpc-di ext4-modules-4.9.0-2-powerpc-di isofs-modules-4.9.0-2-powerpc-di jfs-modules-4.9.0-2-powerpc-di xfs-modules-4.9.0-2-powerpc-di fat-modules-4.9.0-2-powerpc-di hfs-modules-4.9.0-2-powerpc-di affs-modules-4.9.0-2-powerpc-di md-modules-4.9.0-2-powerpc-di multipath-modules-4.9.0-2-powerpc-di usb-modules-4.9.0-2-powerpc-di usb-storage-modules-4.9.0-2-powerpc-di pcmcia-storage-modules-4.9.0-2-powerpc-di fb-modules-4.9.0-2-powerpc-di input-modules-4.9.0-2-powerpc-di event-modules-4.9.0-2-powerpc-di mouse-modules-4.9.0-2-powerpc-di nic-pcmcia-modules-4.9.0-2-powerpc-di pcmcia-modules-4.9.0-2-powerpc-di sata-modules-4.9.0-2-powerpc-di crc-modules-4.9.0-2-powerpc-di crypto-modules-4.9.0-2-powerpc-di crypto-dm-modules-4.9.0-2-powerpc-di ata-modules-4.9.0-2-powerpc-di nbd-modules-4.9.0-2-powerpc-di squashfs-modules-4.9.0-2-powerpc-di virtio-modules-4.9.0-2-powerpc-di uinput-modules-4.9.0-2-powerpc-di zlib-modules-4.9.0-2-powerpc-di udf-modules-4.9.0-2-powerpc-di fuse-modules-4.9.0-2-powerpc-di kernel-image-4.9.0-2-powerpc64-di nic-modules-4.9.0-2-powerpc64-di nic-shared-modules-4.9.0-2-powerpc64-di serial-modules-4.9.0-2-powerpc64-di usb-serial-modules-4.9.0-2-powerpc64-di ppp-modules-4.9.0-2-powerpc64-di pata-modules-4.9.0-2-powerpc64-di cdrom-core-modules-4.9.0-2-powerpc64-di firewire-core-modules-4.9.0-2-powerpc64-di scsi-core-modules-4.9.0-2-powerpc64-di scsi-modules-4.9.0-2-powerpc64-di loop-modules-4.9.0-2-powerpc64-di btrfs-modules-4.9.0-2-powerpc64-di ext4-modules-4.9.0-2-powerpc64-di isofs-modules-4.9.0-2-powerpc64-di jfs-modules-4.9.0-2-powerpc64-di xfs-modules-4.9.0-2-powerpc64-di fat-modules-4.9.0-2-powerpc64-di hfs-modules-4.9.0-2-powerpc64-di affs-modules-4.9.0-2-powerpc64-di md-modules-4.9.0-2-powerpc64-di multipath-modules-4.9.0-2-powerpc64-di usb-modules-4.9.0-2-powerpc64-di usb-storage-modules-4.9.0-2-powerpc64-di pcmcia-storage-modules-4.9.0-2-powerpc64-di input-modules-4.9.0-2-powerpc64-di event-modules-4.9.0-2-powerpc64-di mouse-modules-4.9.0-2-powerpc64-di nic-pcmcia-modules-4.9.0-2-powerpc64-di pcmcia-modules-4.9.0-2-powerpc64-di sata-modules-4.9.0-2-powerpc64-di crc-modules-4.9.0-2-powerpc64-di crypto-modules-4.9.0-2-powerpc64-di crypto-dm-modules-4.9.0-2-powerpc64-di ata-modules-4.9.0-2-powerpc64-di nbd-modules-4.9.0-2-powerpc64-di squashfs-modules-4.9.0-2-powerpc64-di virtio-modules-4.9.0-2-powerpc64-di uinput-modules-4.9.0-2-powerpc64-di udf-modules-4.9.0-2-powerpc64-di fuse-modules-4.9.0-2-powerpc64-di hypervisor-modules-4.9.0-2-powerpc64-di fancontrol-modules-4.9.0-2-powerpc64-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_powerpc_none: binary-arch_powerpc_none_powerpc binary-arch_powerpc_none_powerpc-smp binary-arch_powerpc_none_powerpc64 binary-arch_powerpc_none_real binary-arch_powerpc_none_powerpc: binary-arch_powerpc_none_powerpc_real binary-arch_powerpc_none_powerpc-smp: binary-arch_powerpc_none_powerpc-smp_real binary-arch_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_powerpc_none_powerpc64: binary-arch_powerpc_none_powerpc64_real binary-arch_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_powerpc_none_real: binary-arch_powerpc_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='powerpc' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_powerpcspe: binary-arch_powerpcspe_none binary-arch_powerpcspe_real binary-arch_powerpcspe_none: binary-arch_powerpcspe_none_powerpcspe binary-arch_powerpcspe_none_real binary-arch_powerpcspe_none_powerpcspe: binary-arch_powerpcspe_none_powerpcspe_real binary-arch_powerpcspe_none_powerpcspe_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_powerpcspe_none_real: binary-arch_powerpcspe_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='powerpcspe' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='powerpcspe' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_ppc64:: binary-arch_ppc64_none binary-arch_ppc64_real binary-arch_ppc64:: - $(MAKE) -f debian/rules.real install-udeb_ppc64 ABINAME='4.9.0-2' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc64-di nic-modules-4.9.0-2-powerpc64-di nic-shared-modules-4.9.0-2-powerpc64-di serial-modules-4.9.0-2-powerpc64-di usb-serial-modules-4.9.0-2-powerpc64-di ppp-modules-4.9.0-2-powerpc64-di pata-modules-4.9.0-2-powerpc64-di cdrom-core-modules-4.9.0-2-powerpc64-di firewire-core-modules-4.9.0-2-powerpc64-di scsi-core-modules-4.9.0-2-powerpc64-di scsi-modules-4.9.0-2-powerpc64-di loop-modules-4.9.0-2-powerpc64-di btrfs-modules-4.9.0-2-powerpc64-di ext4-modules-4.9.0-2-powerpc64-di isofs-modules-4.9.0-2-powerpc64-di jfs-modules-4.9.0-2-powerpc64-di xfs-modules-4.9.0-2-powerpc64-di fat-modules-4.9.0-2-powerpc64-di hfs-modules-4.9.0-2-powerpc64-di affs-modules-4.9.0-2-powerpc64-di md-modules-4.9.0-2-powerpc64-di multipath-modules-4.9.0-2-powerpc64-di usb-modules-4.9.0-2-powerpc64-di usb-storage-modules-4.9.0-2-powerpc64-di pcmcia-storage-modules-4.9.0-2-powerpc64-di input-modules-4.9.0-2-powerpc64-di event-modules-4.9.0-2-powerpc64-di mouse-modules-4.9.0-2-powerpc64-di nic-pcmcia-modules-4.9.0-2-powerpc64-di pcmcia-modules-4.9.0-2-powerpc64-di sata-modules-4.9.0-2-powerpc64-di crc-modules-4.9.0-2-powerpc64-di crypto-modules-4.9.0-2-powerpc64-di crypto-dm-modules-4.9.0-2-powerpc64-di ata-modules-4.9.0-2-powerpc64-di nbd-modules-4.9.0-2-powerpc64-di squashfs-modules-4.9.0-2-powerpc64-di virtio-modules-4.9.0-2-powerpc64-di uinput-modules-4.9.0-2-powerpc64-di udf-modules-4.9.0-2-powerpc64-di fuse-modules-4.9.0-2-powerpc64-di hypervisor-modules-4.9.0-2-powerpc64-di fancontrol-modules-4.9.0-2-powerpc64-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_ppc64 ABINAME='4.9.0-2' ARCH='ppc64' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc64-di nic-modules-4.9.0-2-powerpc64-di nic-shared-modules-4.9.0-2-powerpc64-di serial-modules-4.9.0-2-powerpc64-di usb-serial-modules-4.9.0-2-powerpc64-di ppp-modules-4.9.0-2-powerpc64-di pata-modules-4.9.0-2-powerpc64-di cdrom-core-modules-4.9.0-2-powerpc64-di firewire-core-modules-4.9.0-2-powerpc64-di scsi-core-modules-4.9.0-2-powerpc64-di scsi-modules-4.9.0-2-powerpc64-di loop-modules-4.9.0-2-powerpc64-di btrfs-modules-4.9.0-2-powerpc64-di ext4-modules-4.9.0-2-powerpc64-di isofs-modules-4.9.0-2-powerpc64-di jfs-modules-4.9.0-2-powerpc64-di xfs-modules-4.9.0-2-powerpc64-di fat-modules-4.9.0-2-powerpc64-di hfs-modules-4.9.0-2-powerpc64-di affs-modules-4.9.0-2-powerpc64-di md-modules-4.9.0-2-powerpc64-di multipath-modules-4.9.0-2-powerpc64-di usb-modules-4.9.0-2-powerpc64-di usb-storage-modules-4.9.0-2-powerpc64-di pcmcia-storage-modules-4.9.0-2-powerpc64-di input-modules-4.9.0-2-powerpc64-di event-modules-4.9.0-2-powerpc64-di mouse-modules-4.9.0-2-powerpc64-di nic-pcmcia-modules-4.9.0-2-powerpc64-di pcmcia-modules-4.9.0-2-powerpc64-di sata-modules-4.9.0-2-powerpc64-di crc-modules-4.9.0-2-powerpc64-di crypto-modules-4.9.0-2-powerpc64-di crypto-dm-modules-4.9.0-2-powerpc64-di ata-modules-4.9.0-2-powerpc64-di nbd-modules-4.9.0-2-powerpc64-di squashfs-modules-4.9.0-2-powerpc64-di virtio-modules-4.9.0-2-powerpc64-di uinput-modules-4.9.0-2-powerpc64-di udf-modules-4.9.0-2-powerpc64-di fuse-modules-4.9.0-2-powerpc64-di hypervisor-modules-4.9.0-2-powerpc64-di fancontrol-modules-4.9.0-2-powerpc64-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_ppc64_none: binary-arch_ppc64_none_powerpc64 binary-arch_ppc64_none_real binary-arch_ppc64_none_powerpc64: binary-arch_ppc64_none_powerpc64_real binary-arch_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_ppc64_none_real: binary-arch_ppc64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='ppc64' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_ppc64el:: binary-arch_ppc64el_none binary-arch_ppc64el_real binary-arch_ppc64el:: - $(MAKE) -f debian/rules.real install-udeb_ppc64el ABINAME='4.9.0-2' ARCH='ppc64el' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc64le-di nic-modules-4.9.0-2-powerpc64le-di nic-shared-modules-4.9.0-2-powerpc64le-di serial-modules-4.9.0-2-powerpc64le-di usb-serial-modules-4.9.0-2-powerpc64le-di ppp-modules-4.9.0-2-powerpc64le-di cdrom-core-modules-4.9.0-2-powerpc64le-di firewire-core-modules-4.9.0-2-powerpc64le-di scsi-core-modules-4.9.0-2-powerpc64le-di scsi-modules-4.9.0-2-powerpc64le-di loop-modules-4.9.0-2-powerpc64le-di btrfs-modules-4.9.0-2-powerpc64le-di ext4-modules-4.9.0-2-powerpc64le-di isofs-modules-4.9.0-2-powerpc64le-di jfs-modules-4.9.0-2-powerpc64le-di xfs-modules-4.9.0-2-powerpc64le-di fat-modules-4.9.0-2-powerpc64le-di md-modules-4.9.0-2-powerpc64le-di multipath-modules-4.9.0-2-powerpc64le-di usb-modules-4.9.0-2-powerpc64le-di usb-storage-modules-4.9.0-2-powerpc64le-di input-modules-4.9.0-2-powerpc64le-di event-modules-4.9.0-2-powerpc64le-di mouse-modules-4.9.0-2-powerpc64le-di sata-modules-4.9.0-2-powerpc64le-di crc-modules-4.9.0-2-powerpc64le-di crypto-modules-4.9.0-2-powerpc64le-di crypto-dm-modules-4.9.0-2-powerpc64le-di ata-modules-4.9.0-2-powerpc64le-di nbd-modules-4.9.0-2-powerpc64le-di squashfs-modules-4.9.0-2-powerpc64le-di virtio-modules-4.9.0-2-powerpc64le-di uinput-modules-4.9.0-2-powerpc64le-di udf-modules-4.9.0-2-powerpc64le-di fuse-modules-4.9.0-2-powerpc64le-di hypervisor-modules-4.9.0-2-powerpc64le-di fancontrol-modules-4.9.0-2-powerpc64le-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_ppc64el ABINAME='4.9.0-2' ARCH='ppc64el' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-powerpc64le-di nic-modules-4.9.0-2-powerpc64le-di nic-shared-modules-4.9.0-2-powerpc64le-di serial-modules-4.9.0-2-powerpc64le-di usb-serial-modules-4.9.0-2-powerpc64le-di ppp-modules-4.9.0-2-powerpc64le-di cdrom-core-modules-4.9.0-2-powerpc64le-di firewire-core-modules-4.9.0-2-powerpc64le-di scsi-core-modules-4.9.0-2-powerpc64le-di scsi-modules-4.9.0-2-powerpc64le-di loop-modules-4.9.0-2-powerpc64le-di btrfs-modules-4.9.0-2-powerpc64le-di ext4-modules-4.9.0-2-powerpc64le-di isofs-modules-4.9.0-2-powerpc64le-di jfs-modules-4.9.0-2-powerpc64le-di xfs-modules-4.9.0-2-powerpc64le-di fat-modules-4.9.0-2-powerpc64le-di md-modules-4.9.0-2-powerpc64le-di multipath-modules-4.9.0-2-powerpc64le-di usb-modules-4.9.0-2-powerpc64le-di usb-storage-modules-4.9.0-2-powerpc64le-di input-modules-4.9.0-2-powerpc64le-di event-modules-4.9.0-2-powerpc64le-di mouse-modules-4.9.0-2-powerpc64le-di sata-modules-4.9.0-2-powerpc64le-di crc-modules-4.9.0-2-powerpc64le-di crypto-modules-4.9.0-2-powerpc64le-di crypto-dm-modules-4.9.0-2-powerpc64le-di ata-modules-4.9.0-2-powerpc64le-di nbd-modules-4.9.0-2-powerpc64le-di squashfs-modules-4.9.0-2-powerpc64le-di virtio-modules-4.9.0-2-powerpc64le-di uinput-modules-4.9.0-2-powerpc64le-di udf-modules-4.9.0-2-powerpc64le-di fuse-modules-4.9.0-2-powerpc64le-di hypervisor-modules-4.9.0-2-powerpc64le-di fancontrol-modules-4.9.0-2-powerpc64le-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_ppc64el_none: binary-arch_ppc64el_none_powerpc64le binary-arch_ppc64el_none_real binary-arch_ppc64el_none_powerpc64le: binary-arch_ppc64el_none_powerpc64le_real binary-arch_ppc64el_none_powerpc64le_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_ppc64el_none_real: binary-arch_ppc64el_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='ppc64el' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='ppc64el' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_s390: binary-arch_s390_extra binary-arch_s390_real binary-arch_s390_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='s390' DH_OPTIONS='-plinux-compiler-gcc-6-s390' binary-arch_s390_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_s390x:: binary-arch_s390x_extra binary-arch_s390x_none binary-arch_s390x_real binary-arch_s390x:: - $(MAKE) -f debian/rules.real install-udeb_s390x ABINAME='4.9.0-2' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-s390x-di nic-modules-4.9.0-2-s390x-di scsi-core-modules-4.9.0-2-s390x-di scsi-modules-4.9.0-2-s390x-di loop-modules-4.9.0-2-s390x-di btrfs-modules-4.9.0-2-s390x-di ext4-modules-4.9.0-2-s390x-di isofs-modules-4.9.0-2-s390x-di xfs-modules-4.9.0-2-s390x-di fat-modules-4.9.0-2-s390x-di md-modules-4.9.0-2-s390x-di multipath-modules-4.9.0-2-s390x-di crc-modules-4.9.0-2-s390x-di crypto-modules-4.9.0-2-s390x-di crypto-dm-modules-4.9.0-2-s390x-di nbd-modules-4.9.0-2-s390x-di virtio-modules-4.9.0-2-s390x-di zlib-modules-4.9.0-2-s390x-di udf-modules-4.9.0-2-s390x-di fuse-modules-4.9.0-2-s390x-di dasd-modules-4.9.0-2-s390x-di dasd-extra-modules-4.9.0-2-s390x-di' UDEB_UNSIGNED_TEST_BUILD=True + $(MAKE) -f debian/rules.real install-udeb_s390x ABINAME='4.9.0-2' ARCH='s390x' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-s390x-di nic-modules-4.9.0-2-s390x-di scsi-core-modules-4.9.0-2-s390x-di scsi-modules-4.9.0-2-s390x-di loop-modules-4.9.0-2-s390x-di btrfs-modules-4.9.0-2-s390x-di ext4-modules-4.9.0-2-s390x-di isofs-modules-4.9.0-2-s390x-di xfs-modules-4.9.0-2-s390x-di fat-modules-4.9.0-2-s390x-di md-modules-4.9.0-2-s390x-di multipath-modules-4.9.0-2-s390x-di crc-modules-4.9.0-2-s390x-di crypto-modules-4.9.0-2-s390x-di crypto-dm-modules-4.9.0-2-s390x-di nbd-modules-4.9.0-2-s390x-di virtio-modules-4.9.0-2-s390x-di zlib-modules-4.9.0-2-s390x-di udf-modules-4.9.0-2-s390x-di fuse-modules-4.9.0-2-s390x-di dasd-modules-4.9.0-2-s390x-di dasd-extra-modules-4.9.0-2-s390x-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_s390x_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='s390x' DH_OPTIONS='-plinux-compiler-gcc-6-s390' binary-arch_s390x_none: binary-arch_s390x_none_real binary-arch_s390x_none_s390x binary-arch_s390x_none_real: binary-arch_s390x_none_s390x: binary-arch_s390x_none_s390x_real binary-arch_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x-unsigned' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' binary-arch_s390x_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='s390x' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sh3: binary-arch_sh3_real binary-arch_sh3_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sh4:: binary-arch_sh4_none binary-arch_sh4_real binary-arch_sh4:: - $(MAKE) -f debian/rules.real install-udeb_sh4 ABINAME='4.9.0-2' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-sh7751r-di nic-modules-4.9.0-2-sh7751r-di usb-serial-modules-4.9.0-2-sh7751r-di ppp-modules-4.9.0-2-sh7751r-di pata-modules-4.9.0-2-sh7751r-di cdrom-core-modules-4.9.0-2-sh7751r-di firewire-core-modules-4.9.0-2-sh7751r-di loop-modules-4.9.0-2-sh7751r-di btrfs-modules-4.9.0-2-sh7751r-di ext4-modules-4.9.0-2-sh7751r-di isofs-modules-4.9.0-2-sh7751r-di jfs-modules-4.9.0-2-sh7751r-di xfs-modules-4.9.0-2-sh7751r-di fat-modules-4.9.0-2-sh7751r-di minix-modules-4.9.0-2-sh7751r-di md-modules-4.9.0-2-sh7751r-di multipath-modules-4.9.0-2-sh7751r-di usb-storage-modules-4.9.0-2-sh7751r-di nic-usb-modules-4.9.0-2-sh7751r-di sata-modules-4.9.0-2-sh7751r-di i2c-modules-4.9.0-2-sh7751r-di crc-modules-4.9.0-2-sh7751r-di crypto-modules-4.9.0-2-sh7751r-di crypto-dm-modules-4.9.0-2-sh7751r-di nbd-modules-4.9.0-2-sh7751r-di squashfs-modules-4.9.0-2-sh7751r-di speakup-modules-4.9.0-2-sh7751r-di virtio-modules-4.9.0-2-sh7751r-di sound-modules-4.9.0-2-sh7751r-di zlib-modules-4.9.0-2-sh7751r-di udf-modules-4.9.0-2-sh7751r-di fuse-modules-4.9.0-2-sh7751r-di kernel-image-4.9.0-2-sh7785lcr-di nic-modules-4.9.0-2-sh7785lcr-di usb-serial-modules-4.9.0-2-sh7785lcr-di ppp-modules-4.9.0-2-sh7785lcr-di pata-modules-4.9.0-2-sh7785lcr-di cdrom-core-modules-4.9.0-2-sh7785lcr-di firewire-core-modules-4.9.0-2-sh7785lcr-di loop-modules-4.9.0-2-sh7785lcr-di btrfs-modules-4.9.0-2-sh7785lcr-di ext4-modules-4.9.0-2-sh7785lcr-di isofs-modules-4.9.0-2-sh7785lcr-di jfs-modules-4.9.0-2-sh7785lcr-di xfs-modules-4.9.0-2-sh7785lcr-di fat-modules-4.9.0-2-sh7785lcr-di minix-modules-4.9.0-2-sh7785lcr-di md-modules-4.9.0-2-sh7785lcr-di multipath-modules-4.9.0-2-sh7785lcr-di nic-usb-modules-4.9.0-2-sh7785lcr-di sata-modules-4.9.0-2-sh7785lcr-di crc-modules-4.9.0-2-sh7785lcr-di crypto-modules-4.9.0-2-sh7785lcr-di crypto-dm-modules-4.9.0-2-sh7785lcr-di nbd-modules-4.9.0-2-sh7785lcr-di squashfs-modules-4.9.0-2-sh7785lcr-di speakup-modules-4.9.0-2-sh7785lcr-di sound-modules-4.9.0-2-sh7785lcr-di zlib-modules-4.9.0-2-sh7785lcr-di udf-modules-4.9.0-2-sh7785lcr-di fuse-modules-4.9.0-2-sh7785lcr-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_sh4 ABINAME='4.9.0-2' ARCH='sh4' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-sh7751r-di nic-modules-4.9.0-2-sh7751r-di usb-serial-modules-4.9.0-2-sh7751r-di ppp-modules-4.9.0-2-sh7751r-di pata-modules-4.9.0-2-sh7751r-di cdrom-core-modules-4.9.0-2-sh7751r-di firewire-core-modules-4.9.0-2-sh7751r-di loop-modules-4.9.0-2-sh7751r-di btrfs-modules-4.9.0-2-sh7751r-di ext4-modules-4.9.0-2-sh7751r-di isofs-modules-4.9.0-2-sh7751r-di jfs-modules-4.9.0-2-sh7751r-di xfs-modules-4.9.0-2-sh7751r-di fat-modules-4.9.0-2-sh7751r-di minix-modules-4.9.0-2-sh7751r-di md-modules-4.9.0-2-sh7751r-di multipath-modules-4.9.0-2-sh7751r-di usb-storage-modules-4.9.0-2-sh7751r-di nic-usb-modules-4.9.0-2-sh7751r-di sata-modules-4.9.0-2-sh7751r-di i2c-modules-4.9.0-2-sh7751r-di crc-modules-4.9.0-2-sh7751r-di crypto-modules-4.9.0-2-sh7751r-di crypto-dm-modules-4.9.0-2-sh7751r-di nbd-modules-4.9.0-2-sh7751r-di squashfs-modules-4.9.0-2-sh7751r-di speakup-modules-4.9.0-2-sh7751r-di virtio-modules-4.9.0-2-sh7751r-di sound-modules-4.9.0-2-sh7751r-di zlib-modules-4.9.0-2-sh7751r-di udf-modules-4.9.0-2-sh7751r-di fuse-modules-4.9.0-2-sh7751r-di kernel-image-4.9.0-2-sh7785lcr-di nic-modules-4.9.0-2-sh7785lcr-di usb-serial-modules-4.9.0-2-sh7785lcr-di ppp-modules-4.9.0-2-sh7785lcr-di pata-modules-4.9.0-2-sh7785lcr-di cdrom-core-modules-4.9.0-2-sh7785lcr-di firewire-core-modules-4.9.0-2-sh7785lcr-di loop-modules-4.9.0-2-sh7785lcr-di btrfs-modules-4.9.0-2-sh7785lcr-di ext4-modules-4.9.0-2-sh7785lcr-di isofs-modules-4.9.0-2-sh7785lcr-di jfs-modules-4.9.0-2-sh7785lcr-di xfs-modules-4.9.0-2-sh7785lcr-di fat-modules-4.9.0-2-sh7785lcr-di minix-modules-4.9.0-2-sh7785lcr-di md-modules-4.9.0-2-sh7785lcr-di multipath-modules-4.9.0-2-sh7785lcr-di nic-usb-modules-4.9.0-2-sh7785lcr-di sata-modules-4.9.0-2-sh7785lcr-di crc-modules-4.9.0-2-sh7785lcr-di crypto-modules-4.9.0-2-sh7785lcr-di crypto-dm-modules-4.9.0-2-sh7785lcr-di nbd-modules-4.9.0-2-sh7785lcr-di squashfs-modules-4.9.0-2-sh7785lcr-di speakup-modules-4.9.0-2-sh7785lcr-di sound-modules-4.9.0-2-sh7785lcr-di zlib-modules-4.9.0-2-sh7785lcr-di udf-modules-4.9.0-2-sh7785lcr-di fuse-modules-4.9.0-2-sh7785lcr-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_sh4_none: binary-arch_sh4_none_real binary-arch_sh4_none_sh7751r binary-arch_sh4_none_sh7785lcr binary-arch_sh4_none_real: binary-arch_sh4_none_sh7751r: binary-arch_sh4_none_sh7751r_real binary-arch_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sh4_none_sh7785lcr: binary-arch_sh4_none_sh7785lcr_real binary-arch_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sh4_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sh4' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sparc: binary-arch_sparc_real binary-arch_sparc64:: binary-arch_sparc64_none binary-arch_sparc64_real binary-arch_sparc64:: - $(MAKE) -f debian/rules.real install-udeb_sparc64 ABINAME='4.9.0-2' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-sparc64-di nic-modules-4.9.0-2-sparc64-di ppp-modules-4.9.0-2-sparc64-di pata-modules-4.9.0-2-sparc64-di cdrom-core-modules-4.9.0-2-sparc64-di scsi-core-modules-4.9.0-2-sparc64-di scsi-modules-4.9.0-2-sparc64-di btrfs-modules-4.9.0-2-sparc64-di ext4-modules-4.9.0-2-sparc64-di isofs-modules-4.9.0-2-sparc64-di jfs-modules-4.9.0-2-sparc64-di xfs-modules-4.9.0-2-sparc64-di fat-modules-4.9.0-2-sparc64-di md-modules-4.9.0-2-sparc64-di multipath-modules-4.9.0-2-sparc64-di usb-modules-4.9.0-2-sparc64-di usb-storage-modules-4.9.0-2-sparc64-di input-modules-4.9.0-2-sparc64-di sata-modules-4.9.0-2-sparc64-di crc-modules-4.9.0-2-sparc64-di crypto-modules-4.9.0-2-sparc64-di crypto-dm-modules-4.9.0-2-sparc64-di ata-modules-4.9.0-2-sparc64-di nbd-modules-4.9.0-2-sparc64-di squashfs-modules-4.9.0-2-sparc64-di virtio-modules-4.9.0-2-sparc64-di zlib-modules-4.9.0-2-sparc64-di udf-modules-4.9.0-2-sparc64-di fuse-modules-4.9.0-2-sparc64-di' UDEB_UNSIGNED_TEST_BUILD=False + $(MAKE) -f debian/rules.real install-udeb_sparc64 ABINAME='4.9.0-2' ARCH='sparc64' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' PACKAGE_NAMES='kernel-image-4.9.0-2-sparc64-di nic-modules-4.9.0-2-sparc64-di ppp-modules-4.9.0-2-sparc64-di pata-modules-4.9.0-2-sparc64-di cdrom-core-modules-4.9.0-2-sparc64-di scsi-core-modules-4.9.0-2-sparc64-di scsi-modules-4.9.0-2-sparc64-di btrfs-modules-4.9.0-2-sparc64-di ext4-modules-4.9.0-2-sparc64-di isofs-modules-4.9.0-2-sparc64-di jfs-modules-4.9.0-2-sparc64-di xfs-modules-4.9.0-2-sparc64-di fat-modules-4.9.0-2-sparc64-di md-modules-4.9.0-2-sparc64-di multipath-modules-4.9.0-2-sparc64-di usb-modules-4.9.0-2-sparc64-di usb-storage-modules-4.9.0-2-sparc64-di input-modules-4.9.0-2-sparc64-di sata-modules-4.9.0-2-sparc64-di crc-modules-4.9.0-2-sparc64-di crypto-modules-4.9.0-2-sparc64-di crypto-dm-modules-4.9.0-2-sparc64-di ata-modules-4.9.0-2-sparc64-di nbd-modules-4.9.0-2-sparc64-di squashfs-modules-4.9.0-2-sparc64-di virtio-modules-4.9.0-2-sparc64-di zlib-modules-4.9.0-2-sparc64-di udf-modules-4.9.0-2-sparc64-di fuse-modules-4.9.0-2-sparc64-di' UDEB_UNSIGNED_TEST_BUILD=False binary-arch_sparc64_none: binary-arch_sparc64_none_real binary-arch_sparc64_none_sparc64 binary-arch_sparc64_none_sparc64-smp binary-arch_sparc64_none_real: binary-arch_sparc64_none_sparc64: binary-arch_sparc64_none_sparc64_real binary-arch_sparc64_none_sparc64-smp: binary-arch_sparc64_none_sparc64-smp_real binary-arch_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sparc64_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sparc64' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_sparc_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_tilegx: binary-arch_tilegx_real binary-arch_tilegx_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-arch_x32: binary-arch_x32_extra binary-arch_x32_real binary-arch_x32_extra:: $(MAKE) -f debian/rules.real install-dummy ARCH='x32' DH_OPTIONS='-plinux-compiler-gcc-6-x86' binary-arch_x32_real:: - $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-arch-arch ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-indep:: binary-indep_none binary-indep_rt setup binary-indep:: - $(MAKE) -f debian/rules.real binary-indep ABINAME='4.9.0-2' ALL_FEATURESETS='none rt' ALL_TRIPLETS='alpha_none_alpha-generic alpha_none_alpha-smp amd64_none_amd64 amd64_rt_amd64 arm64_none_arm64 armel_none_marvell armhf_none_armmp armhf_none_armmp-lpae hppa_none_parisc hppa_none_parisc64-smp i386_none_686 i386_none_686-pae i386_rt_686-pae m68k_none_m68k mips_none_4kc-malta mips_none_5kc-malta mips_none_octeon mipsel_none_4kc-malta mipsel_none_5kc-malta mipsel_none_loongson-3 mipsel_none_octeon mips64_none_5kc-malta mips64_none_octeon mips64el_none_5kc-malta mips64el_none_loongson-3 mips64el_none_octeon powerpc_none_powerpc powerpc_none_powerpc-smp powerpc_none_powerpc64 powerpcspe_none_powerpcspe ppc64_none_powerpc64 ppc64el_none_powerpc64le s390x_none_s390x sh4_none_sh7751r sh4_none_sh7785lcr sparc64_none_sparc64 sparc64_none_sparc64-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-indep ABINAME='4.9.0-2' ALL_FEATURESETS='none rt' ALL_TRIPLETS='alpha_none_alpha-generic alpha_none_alpha-smp amd64_none_amd64 amd64_rt_amd64 arm64_none_arm64 armel_none_marvell armhf_none_rpi armhf_none_rpi2 hppa_none_parisc hppa_none_parisc64-smp i386_none_686 i386_none_686-pae i386_rt_686-pae m68k_none_m68k mips_none_4kc-malta mips_none_5kc-malta mips_none_octeon mipsel_none_4kc-malta mipsel_none_5kc-malta mipsel_none_loongson-3 mipsel_none_octeon mips64_none_5kc-malta mips64_none_octeon mips64el_none_5kc-malta mips64el_none_loongson-3 mips64el_none_octeon powerpc_none_powerpc powerpc_none_powerpc-smp powerpc_none_powerpc64 powerpcspe_none_powerpcspe ppc64_none_powerpc64 ppc64el_none_powerpc64le s390x_none_s390x sh4_none_sh7751r sh4_none_sh7785lcr sparc64_none_sparc64 sparc64_none_sparc64-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-indep_none: binary-indep_none_real binary-indep_none_real:: - $(MAKE) -f debian/rules.real binary-indep-featureset ABINAME='4.9.0-2' ALL_KERNEL_ARCHES='alpha arm arm64 m68k mips parisc powerpc s390 sh sparc x86' FEATURESET='none' LOCALVERSION='' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-indep-featureset ABINAME='4.9.0-2' ALL_KERNEL_ARCHES='alpha arm arm64 m68k mips parisc powerpc s390 sh sparc x86' FEATURESET='none' LOCALVERSION='' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-indep_rt: binary-indep_rt_real binary-indep_rt_real:: - $(MAKE) -f debian/rules.real binary-indep-featureset ABINAME='4.9.0-2' ALL_KERNEL_ARCHES='x86' FEATURESET='rt' LOCALVERSION='-rt' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real binary-indep-featureset ABINAME='4.9.0-2' ALL_KERNEL_ARCHES='x86' FEATURESET='rt' LOCALVERSION='-rt' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_alpha:: source_none_real binary-libc-dev_alpha:: - $(MAKE) -f debian/rules.real install-libc-dev_alpha ABINAME='4.9.0-2' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_alpha ABINAME='4.9.0-2' ARCH='alpha' DO_LIBC='False' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_amd64:: source_none_real binary-libc-dev_amd64:: - $(MAKE) -f debian/rules.real install-libc-dev_amd64 ABINAME='4.9.0-2' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_amd64 ABINAME='4.9.0-2' ARCH='amd64' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_arm64:: source_none_real binary-libc-dev_arm64:: - $(MAKE) -f debian/rules.real install-libc-dev_arm64 ABINAME='4.9.0-2' ARCH='arm64' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_arm64 ABINAME='4.9.0-2' ARCH='arm64' DO_LIBC='False' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_armel:: source_none_real binary-libc-dev_armel:: - $(MAKE) -f debian/rules.real install-libc-dev_armel ABINAME='4.9.0-2' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_armel ABINAME='4.9.0-2' ARCH='armel' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_armhf:: source_none_real binary-libc-dev_armhf:: - $(MAKE) -f debian/rules.real install-libc-dev_armhf ABINAME='4.9.0-2' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_armhf ABINAME='4.9.0-2' ARCH='armhf' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_hppa:: source_none_real binary-libc-dev_hppa:: - $(MAKE) -f debian/rules.real install-libc-dev_hppa ABINAME='4.9.0-2' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_hppa ABINAME='4.9.0-2' ARCH='hppa' DO_LIBC='False' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_i386:: source_none_real binary-libc-dev_i386:: - $(MAKE) -f debian/rules.real install-libc-dev_i386 ABINAME='4.9.0-2' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_i386 ABINAME='4.9.0-2' ARCH='i386' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_m68k:: source_none_real binary-libc-dev_m68k:: - $(MAKE) -f debian/rules.real install-libc-dev_m68k ABINAME='4.9.0-2' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_m68k ABINAME='4.9.0-2' ARCH='m68k' DO_LIBC='False' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mips:: source_none_real binary-libc-dev_mips:: - $(MAKE) -f debian/rules.real install-libc-dev_mips ABINAME='4.9.0-2' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mips ABINAME='4.9.0-2' ARCH='mips' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mips64:: source_none_real binary-libc-dev_mips64:: - $(MAKE) -f debian/rules.real install-libc-dev_mips64 ABINAME='4.9.0-2' ARCH='mips64' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mips64 ABINAME='4.9.0-2' ARCH='mips64' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mips64el:: source_none_real binary-libc-dev_mips64el:: - $(MAKE) -f debian/rules.real install-libc-dev_mips64el ABINAME='4.9.0-2' ARCH='mips64el' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mips64el ABINAME='4.9.0-2' ARCH='mips64el' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mipsel:: source_none_real binary-libc-dev_mipsel:: - $(MAKE) -f debian/rules.real install-libc-dev_mipsel ABINAME='4.9.0-2' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mipsel ABINAME='4.9.0-2' ARCH='mipsel' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mipsn32:: source_none_real binary-libc-dev_mipsn32:: - $(MAKE) -f debian/rules.real install-libc-dev_mipsn32 ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mipsn32 ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_mipsn32el:: source_none_real binary-libc-dev_mipsn32el:: - $(MAKE) -f debian/rules.real install-libc-dev_mipsn32el ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_mipsn32el ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_powerpc:: source_none_real binary-libc-dev_powerpc:: - $(MAKE) -f debian/rules.real install-libc-dev_powerpc ABINAME='4.9.0-2' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_powerpc ABINAME='4.9.0-2' ARCH='powerpc' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_powerpcspe:: source_none_real binary-libc-dev_powerpcspe:: - $(MAKE) -f debian/rules.real install-libc-dev_powerpcspe ABINAME='4.9.0-2' ARCH='powerpcspe' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_powerpcspe ABINAME='4.9.0-2' ARCH='powerpcspe' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_ppc64:: source_none_real binary-libc-dev_ppc64:: - $(MAKE) -f debian/rules.real install-libc-dev_ppc64 ABINAME='4.9.0-2' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_ppc64 ABINAME='4.9.0-2' ARCH='ppc64' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_ppc64el:: source_none_real binary-libc-dev_ppc64el:: - $(MAKE) -f debian/rules.real install-libc-dev_ppc64el ABINAME='4.9.0-2' ARCH='ppc64el' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_ppc64el ABINAME='4.9.0-2' ARCH='ppc64el' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_s390:: source_none_real binary-libc-dev_s390:: - $(MAKE) -f debian/rules.real install-libc-dev_s390 ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_s390 ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_s390x:: source_none_real binary-libc-dev_s390x:: - $(MAKE) -f debian/rules.real install-libc-dev_s390x ABINAME='4.9.0-2' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_s390x ABINAME='4.9.0-2' ARCH='s390x' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_sh3:: source_none_real binary-libc-dev_sh3:: - $(MAKE) -f debian/rules.real install-libc-dev_sh3 ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_sh3 ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_sh4:: source_none_real binary-libc-dev_sh4:: - $(MAKE) -f debian/rules.real install-libc-dev_sh4 ABINAME='4.9.0-2' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_sh4 ABINAME='4.9.0-2' ARCH='sh4' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_sparc:: source_none_real binary-libc-dev_sparc:: - $(MAKE) -f debian/rules.real install-libc-dev_sparc ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_sparc ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_sparc64:: source_none_real binary-libc-dev_sparc64:: - $(MAKE) -f debian/rules.real install-libc-dev_sparc64 ABINAME='4.9.0-2' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_sparc64 ABINAME='4.9.0-2' ARCH='sparc64' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_tilegx:: source_none_real binary-libc-dev_tilegx:: - $(MAKE) -f debian/rules.real install-libc-dev_tilegx ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_tilegx ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' binary-libc-dev_x32:: source_none_real binary-libc-dev_x32:: - $(MAKE) -f debian/rules.real install-libc-dev_x32 ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real install-libc-dev_x32 ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch: build-arch_alpha build-arch_amd64 build-arch_arm64 build-arch_armel build-arch_armhf build-arch_hppa build-arch_i386 build-arch_m68k build-arch_mips build-arch_mips64 build-arch_mips64el build-arch_mipsel build-arch_mipsn32 build-arch_mipsn32el build-arch_powerpc build-arch_powerpcspe build-arch_ppc64 build-arch_ppc64el build-arch_s390 build-arch_s390x build-arch_sh3 build-arch_sh4 build-arch_sparc build-arch_sparc64 build-arch_tilegx build-arch_x32 build-arch_alpha: build-arch_alpha_none build-arch_alpha_real build-arch_alpha_none: build-arch_alpha_none_alpha-generic build-arch_alpha_none_alpha-smp build-arch_alpha_none_real build-arch_alpha_none_alpha-generic: build-arch_alpha_none_alpha-generic_real build-arch_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_alpha_none_alpha-smp: build-arch_alpha_none_alpha-smp_real build-arch_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_alpha_none_real: build-arch_alpha_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='alpha' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='alpha' DO_LIBC='False' KERNEL_ARCH='alpha' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_amd64: build-arch_amd64_none build-arch_amd64_real build-arch_amd64_rt build-arch_amd64_none: build-arch_amd64_none_amd64 build-arch_amd64_none_real build-arch_amd64_none_amd64: build-arch_amd64_none_amd64_real build-arch_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_amd64_none_real: build-arch_amd64_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='amd64' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='amd64' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_amd64_rt: build-arch_amd64_rt_amd64 build-arch_amd64_rt_real build-arch_amd64_rt_amd64: build-arch_amd64_rt_amd64_real build-arch_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_amd64_rt_real: build-arch_arm64: build-arch_arm64_none build-arch_arm64_real build-arch_arm64_none: build-arch_arm64_none_arm64 build-arch_arm64_none_real build-arch_arm64_none_arm64: build-arch_arm64_none_arm64_real build-arch_arm64_none_arm64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64-unsigned' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_arm64_none_real: build-arch_arm64_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='arm64' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='arm64' DO_LIBC='False' KERNEL_ARCH='arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_armel: build-arch_armel_none build-arch_armel_real build-arch_armel_none: build-arch_armel_none_marvell build-arch_armel_none_real build-arch_armel_none_marvell: build-arch_armel_none_marvell_real build-arch_armel_none_marvell_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_armel_none_real: build-arch_armel_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='armel' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='armel' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_armhf: build-arch_armhf_none build-arch_armhf_real -build-arch_armhf_none: build-arch_armhf_none_armmp build-arch_armhf_none_armmp-lpae build-arch_armhf_none_real -build-arch_armhf_none_armmp: build-arch_armhf_none_armmp_real -build-arch_armhf_none_armmp-lpae: build-arch_armhf_none_armmp-lpae_real -build-arch_armhf_none_armmp-lpae_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp-lpae' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-lpae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.armmp-lpae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp-lpae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp-lpae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' -build-arch_armhf_none_armmp_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +build-arch_armhf_none: build-arch_armhf_none_real build-arch_armhf_none_rpi build-arch_armhf_none_rpi2 build-arch_armhf_none_real: +build-arch_armhf_none_rpi: build-arch_armhf_none_rpi_real +build-arch_armhf_none_rpi2: build-arch_armhf_none_rpi2_real +build-arch_armhf_none_rpi2_real:: + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi2' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi2' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi2' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi2' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +build-arch_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_armhf_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='armhf' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='armhf' DO_LIBC='False' KERNEL_ARCH='arm' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_hppa: build-arch_hppa_none build-arch_hppa_real build-arch_hppa_none: build-arch_hppa_none_parisc build-arch_hppa_none_parisc64-smp build-arch_hppa_none_real build-arch_hppa_none_parisc: build-arch_hppa_none_parisc_real build-arch_hppa_none_parisc64-smp: build-arch_hppa_none_parisc64-smp_real build-arch_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_hppa_none_real: build-arch_hppa_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='hppa' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='hppa' DO_LIBC='False' KERNEL_ARCH='parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_i386: build-arch_i386_none build-arch_i386_real build-arch_i386_rt build-arch_i386_none: build-arch_i386_none_686 build-arch_i386_none_686-pae build-arch_i386_none_real build-arch_i386_none_686: build-arch_i386_none_686_real build-arch_i386_none_686-pae: build-arch_i386_none_686-pae_real build-arch_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_i386_none_686_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_i386_none_real: build-arch_i386_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='i386' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='i386' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_i386_rt: build-arch_i386_rt_686-pae build-arch_i386_rt_real build-arch_i386_rt_686-pae: build-arch_i386_rt_686-pae_real build-arch_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_i386_rt_real: build-arch_m68k: build-arch_m68k_none build-arch_m68k_real build-arch_m68k_none: build-arch_m68k_none_m68k build-arch_m68k_none_real build-arch_m68k_none_m68k: build-arch_m68k_none_m68k_real build-arch_m68k_none_m68k_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_m68k_none_real: build-arch_m68k_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='m68k' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='m68k' DO_LIBC='False' KERNEL_ARCH='m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips: build-arch_mips_none build-arch_mips_real build-arch_mips64: build-arch_mips64_none build-arch_mips64_real build-arch_mips64_none: build-arch_mips64_none_5kc-malta build-arch_mips64_none_octeon build-arch_mips64_none_real build-arch_mips64_none_5kc-malta: build-arch_mips64_none_5kc-malta_real build-arch_mips64_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64_none_octeon: build-arch_mips64_none_octeon_real build-arch_mips64_none_octeon_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64_none_real: build-arch_mips64_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips64' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips64' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64el: build-arch_mips64el_none build-arch_mips64el_real build-arch_mips64el_none: build-arch_mips64el_none_5kc-malta build-arch_mips64el_none_loongson-3 build-arch_mips64el_none_octeon build-arch_mips64el_none_real build-arch_mips64el_none_5kc-malta: build-arch_mips64el_none_5kc-malta_real build-arch_mips64el_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64el_none_loongson-3: build-arch_mips64el_none_loongson-3_real build-arch_mips64el_none_loongson-3_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64el_none_octeon: build-arch_mips64el_none_octeon_real build-arch_mips64el_none_octeon_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips64el_none_real: build-arch_mips64el_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips64el' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips64el' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips_none: build-arch_mips_none_4kc-malta build-arch_mips_none_5kc-malta build-arch_mips_none_octeon build-arch_mips_none_real build-arch_mips_none_4kc-malta: build-arch_mips_none_4kc-malta_real build-arch_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips_none_5kc-malta: build-arch_mips_none_5kc-malta_real build-arch_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips_none_octeon: build-arch_mips_none_octeon_real build-arch_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mips_none_real: build-arch_mips_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mips' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsel: build-arch_mipsel_none build-arch_mipsel_real build-arch_mipsel_none: build-arch_mipsel_none_4kc-malta build-arch_mipsel_none_5kc-malta build-arch_mipsel_none_loongson-3 build-arch_mipsel_none_octeon build-arch_mipsel_none_real build-arch_mipsel_none_4kc-malta: build-arch_mipsel_none_4kc-malta_real build-arch_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsel_none_5kc-malta: build-arch_mipsel_none_5kc-malta_real build-arch_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsel_none_loongson-3: build-arch_mipsel_none_loongson-3_real build-arch_mipsel_none_loongson-3_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsel_none_octeon: build-arch_mipsel_none_octeon_real build-arch_mipsel_none_octeon_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsel_none_real: build-arch_mipsel_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsel' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsel' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsn32: build-arch_mipsn32_real build-arch_mipsn32_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_mipsn32el: build-arch_mipsn32el_real build-arch_mipsn32el_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='mipsn32el' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='mips' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_powerpc: build-arch_powerpc_none build-arch_powerpc_real build-arch_powerpc_none: build-arch_powerpc_none_powerpc build-arch_powerpc_none_powerpc-smp build-arch_powerpc_none_powerpc64 build-arch_powerpc_none_real build-arch_powerpc_none_powerpc: build-arch_powerpc_none_powerpc_real build-arch_powerpc_none_powerpc-smp: build-arch_powerpc_none_powerpc-smp_real build-arch_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_powerpc_none_powerpc64: build-arch_powerpc_none_powerpc64_real build-arch_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_powerpc_none_real: build-arch_powerpc_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='powerpc' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='powerpc' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_powerpcspe: build-arch_powerpcspe_none build-arch_powerpcspe_real build-arch_powerpcspe_none: build-arch_powerpcspe_none_powerpcspe build-arch_powerpcspe_none_real build-arch_powerpcspe_none_powerpcspe: build-arch_powerpcspe_none_powerpcspe_real build-arch_powerpcspe_none_powerpcspe_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_powerpcspe_none_real: build-arch_powerpcspe_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='powerpcspe' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='powerpcspe' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_ppc64: build-arch_ppc64_none build-arch_ppc64_real build-arch_ppc64_none: build-arch_ppc64_none_powerpc64 build-arch_ppc64_none_real build-arch_ppc64_none_powerpc64: build-arch_ppc64_none_powerpc64_real build-arch_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_ppc64_none_real: build-arch_ppc64_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='ppc64' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='ppc64' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_ppc64el: build-arch_ppc64el_none build-arch_ppc64el_real build-arch_ppc64el_none: build-arch_ppc64el_none_powerpc64le build-arch_ppc64el_none_real build-arch_ppc64el_none_powerpc64le: build-arch_ppc64el_none_powerpc64le_real build-arch_ppc64el_none_powerpc64le_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_ppc64el_none_real: build-arch_ppc64el_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='ppc64el' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='ppc64el' DO_LIBC='False' KERNEL_ARCH='powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_s390: build-arch_s390_real build-arch_s390_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='s390' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_s390x: build-arch_s390x_none build-arch_s390x_real build-arch_s390x_none: build-arch_s390x_none_real build-arch_s390x_none_s390x build-arch_s390x_none_real: build-arch_s390x_none_s390x: build-arch_s390x_none_s390x_real build-arch_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x-unsigned' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' build-arch_s390x_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='s390x' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='s390x' DO_LIBC='False' KERNEL_ARCH='s390' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sh3: build-arch_sh3_real build-arch_sh3_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sh3' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sh4: build-arch_sh4_none build-arch_sh4_real build-arch_sh4_none: build-arch_sh4_none_real build-arch_sh4_none_sh7751r build-arch_sh4_none_sh7785lcr build-arch_sh4_none_real: build-arch_sh4_none_sh7751r: build-arch_sh4_none_sh7751r_real build-arch_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sh4_none_sh7785lcr: build-arch_sh4_none_sh7785lcr_real build-arch_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sh4_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sh4' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sh4' DO_LIBC='False' KERNEL_ARCH='sh' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sparc: build-arch_sparc_real build-arch_sparc64: build-arch_sparc64_none build-arch_sparc64_real build-arch_sparc64_none: build-arch_sparc64_none_real build-arch_sparc64_none_sparc64 build-arch_sparc64_none_sparc64-smp @@ -587,22 +587,22 @@ build-arch_sparc64_none_sparc64: build-arch_sparc64_none_sparc64_real build-arch_sparc64_none_sparc64-smp: build-arch_sparc64_none_sparc64-smp_real build-arch_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sparc64_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sparc64' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sparc64' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_sparc_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='sparc' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='sparc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_tilegx: build-arch_tilegx_real build-arch_tilegx_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='tilegx' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='tile' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-arch_x32: build-arch_x32_real build-arch_x32_real:: - $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-arch-arch ABINAME='4.9.0-2' ARCH='x32' DO_HEADERS_ALL='False' DO_LIBC='False' KERNEL_ARCH='x86' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-indep:: build-indep_none build-indep_rt build-indep:: - $(MAKE) -f debian/rules.real build-indep ABINAME='4.9.0-2' ALL_FEATURESETS='none rt' ALL_TRIPLETS='alpha_none_alpha-generic alpha_none_alpha-smp amd64_none_amd64 amd64_rt_amd64 arm64_none_arm64 armel_none_marvell armhf_none_armmp armhf_none_armmp-lpae hppa_none_parisc hppa_none_parisc64-smp i386_none_686 i386_none_686-pae i386_rt_686-pae m68k_none_m68k mips_none_4kc-malta mips_none_5kc-malta mips_none_octeon mipsel_none_4kc-malta mipsel_none_5kc-malta mipsel_none_loongson-3 mipsel_none_octeon mips64_none_5kc-malta mips64_none_octeon mips64el_none_5kc-malta mips64el_none_loongson-3 mips64el_none_octeon powerpc_none_powerpc powerpc_none_powerpc-smp powerpc_none_powerpc64 powerpcspe_none_powerpcspe ppc64_none_powerpc64 ppc64el_none_powerpc64le s390x_none_s390x sh4_none_sh7751r sh4_none_sh7785lcr sparc64_none_sparc64 sparc64_none_sparc64-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real build-indep ABINAME='4.9.0-2' ALL_FEATURESETS='none rt' ALL_TRIPLETS='alpha_none_alpha-generic alpha_none_alpha-smp amd64_none_amd64 amd64_rt_amd64 arm64_none_arm64 armel_none_marvell armhf_none_rpi armhf_none_rpi2 hppa_none_parisc hppa_none_parisc64-smp i386_none_686 i386_none_686-pae i386_rt_686-pae m68k_none_m68k mips_none_4kc-malta mips_none_5kc-malta mips_none_octeon mipsel_none_4kc-malta mipsel_none_5kc-malta mipsel_none_loongson-3 mipsel_none_octeon mips64_none_5kc-malta mips64_none_octeon mips64el_none_5kc-malta mips64el_none_loongson-3 mips64el_none_octeon powerpc_none_powerpc powerpc_none_powerpc-smp powerpc_none_powerpc64 powerpcspe_none_powerpcspe ppc64_none_powerpc64 ppc64el_none_powerpc64le s390x_none_s390x sh4_none_sh7751r sh4_none_sh7785lcr sparc64_none_sparc64 sparc64_none_sparc64-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' build-indep_none: build-indep_none_real build-indep_none_real: build-indep_rt: build-indep_rt_real @@ -612,56 +612,56 @@ setup_alpha_none: setup_alpha_none_alpha-generic setup_alpha_none_alpha-smp setup_alpha_none_real setup_alpha_none_alpha-generic: setup_alpha_none_alpha-generic_real setup_alpha_none_alpha-generic_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-generic' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-generic' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-generic' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-generic' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-generic' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_alpha_none_alpha-smp: setup_alpha_none_alpha-smp_real setup_alpha_none_alpha-smp_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='alpha' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='alpha-smp' IMAGE_FILE='arch/alpha/boot/vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-alpha-smp' KCONFIG='debian/config/config debian/config/alpha/config debian/config/alpha/config.alpha-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='alpha' LOCALVERSION='-alpha-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-alpha-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_alpha_none_real: setup_alpha_real: setup_amd64: setup_amd64_none setup_amd64_real setup_amd64_rt setup_amd64_none: setup_amd64_none_amd64 setup_amd64_none_real setup_amd64_none_amd64: setup_amd64_none_amd64_real setup_amd64_none_amd64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_amd64_none_real: setup_amd64_real: setup_amd64_rt: setup_amd64_rt_amd64 setup_amd64_rt_real setup_amd64_rt_amd64: setup_amd64_rt_amd64_real setup_amd64_rt_amd64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='amd64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-amd64' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/amd64/config debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-amd64' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-amd64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_amd64_rt_real: setup_arm64: setup_arm64_none setup_arm64_real setup_arm64_none: setup_arm64_none_arm64 setup_arm64_none_real setup_arm64_none_arm64: setup_arm64_none_arm64_real setup_arm64_none_arm64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64-unsigned' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='arm64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='arm64' IMAGE_FILE='arch/arm64/boot/Image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-arm64' KCONFIG='debian/config/config debian/config/arm64/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm64' LOCALVERSION='-arm64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-arm64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_arm64_none_real: setup_arm64_real: setup_armel: setup_armel_none setup_armel_real setup_armel_none: setup_armel_none_marvell setup_armel_none_real setup_armel_none_marvell: setup_armel_none_marvell_real setup_armel_none_marvell_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='marvell' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-marvell' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armel/config debian/config/armel/config.marvell' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-marvell' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-marvell' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_armel_none_real: setup_armel_real: setup_armhf: setup_armhf_none setup_armhf_real -setup_armhf_none: setup_armhf_none_armmp setup_armhf_none_armmp-lpae setup_armhf_none_real -setup_armhf_none_armmp: setup_armhf_none_armmp_real -setup_armhf_none_armmp-lpae: setup_armhf_none_armmp-lpae_real -setup_armhf_none_armmp-lpae_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp-lpae' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-lpae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.armmp-lpae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp-lpae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp-lpae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' -setup_armhf_none_armmp_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='armmp' IMAGE_FILE='arch/arm/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-armmp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='arm' LOCALVERSION='-armmp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-armmp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +setup_armhf_none: setup_armhf_none_real setup_armhf_none_rpi setup_armhf_none_rpi2 setup_armhf_none_real: +setup_armhf_none_rpi: setup_armhf_none_rpi_real +setup_armhf_none_rpi2: setup_armhf_none_rpi2_real +setup_armhf_none_rpi2_real:: + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi2' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi2' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi2' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi2' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' +setup_armhf_none_rpi_real:: + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='armhf' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='rpi' IMAGE_FILE='arch/arm/boot/zImagerpdt' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rpi' KCONFIG='debian/config/config debian/config/kernelarch-arm/config debian/config/armhf/config debian/config/armhf/config.rpix debian/config/armhf/config.rpi' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='arm' LOCALVERSION='-rpi' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-rpi' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_armhf_real: setup_hppa: setup_hppa_none setup_hppa_real setup_hppa_none: setup_hppa_none_parisc setup_hppa_none_parisc64-smp setup_hppa_none_real setup_hppa_none_parisc: setup_hppa_none_parisc_real setup_hppa_none_parisc64-smp: setup_hppa_none_parisc64-smp_real setup_hppa_none_parisc64-smp_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' CFLAGS_KERNEL='-fno-cse-follow-jumps' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc64-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc64-smp' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc64-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc64-smp' OVERRIDE_HOST_TYPE='hppa64-linux-gnu' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_hppa_none_parisc_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='hppa' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='parisc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-parisc' KCONFIG='debian/config/config debian/config/hppa/config debian/config/hppa/config.parisc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='parisc' LOCALVERSION='-parisc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-parisc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_hppa_none_real: setup_hppa_real: setup_i386: setup_i386_none setup_i386_real setup_i386_rt @@ -669,21 +669,21 @@ setup_i386_none_686: setup_i386_none_686_real setup_i386_none_686-pae: setup_i386_none_686-pae_real setup_i386_none_686-pae_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686-pae' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_i386_none_686_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='686' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-686' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-686' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-686' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_i386_none_real: setup_i386_real: setup_i386_rt: setup_i386_rt_686-pae setup_i386_rt_real setup_i386_rt_686-pae: setup_i386_rt_686-pae_real setup_i386_rt_686-pae_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-6' DEBUG='True' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='i386' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='rt' FLAVOUR='686-pae' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-rt-686-pae' KCONFIG='debian/config/config debian/config/kernelarch-x86/config debian/config/i386/config debian/config/i386/config.686-pae debian/config/featureset-rt/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='x86' LOCALVERSION='-rt-686-pae' LOCALVERSION_HEADERS='-rt' LOCALVERSION_IMAGE='-rt-686-pae' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_i386_rt_real: setup_m68k: setup_m68k_none setup_m68k_real setup_m68k_none: setup_m68k_none_m68k setup_m68k_none_real setup_m68k_none_m68k: setup_m68k_none_m68k_real setup_m68k_none_m68k_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='m68k' CFLAGS_KERNEL='-ffreestanding' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='m68k' IMAGE_FILE='vmlinux.gz' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-m68k' KCONFIG='debian/config/config debian/config/m68k/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='m68k' LOCALVERSION='-m68k' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-m68k' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_m68k_none_real: setup_m68k_real: setup_mips: setup_mips_none setup_mips_real @@ -691,51 +691,51 @@ setup_mips64_none: setup_mips64_none_5kc-malta setup_mips64_none_octeon setup_mips64_none_real setup_mips64_none_5kc-malta: setup_mips64_none_5kc-malta_real setup_mips64_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips64_none_octeon: setup_mips64_none_octeon_real setup_mips64_none_octeon_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips64_none_real: setup_mips64_real: setup_mips64el: setup_mips64el_none setup_mips64el_real setup_mips64el_none: setup_mips64el_none_5kc-malta setup_mips64el_none_loongson-3 setup_mips64el_none_octeon setup_mips64el_none_real setup_mips64el_none_5kc-malta: setup_mips64el_none_5kc-malta_real setup_mips64el_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips64el_none_loongson-3: setup_mips64el_none_loongson-3_real setup_mips64el_none_loongson-3_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips64el_none_octeon: setup_mips64el_none_octeon_real setup_mips64el_none_octeon_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips64el/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips64el_none_real: setup_mips64el_real: setup_mips_none: setup_mips_none_4kc-malta setup_mips_none_5kc-malta setup_mips_none_octeon setup_mips_none_real setup_mips_none_4kc-malta: setup_mips_none_4kc-malta_real setup_mips_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips_none_5kc-malta: setup_mips_none_5kc-malta_real setup_mips_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips_none_octeon: setup_mips_none_octeon_real setup_mips_none_octeon_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mips' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mips/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mips_none_real: setup_mips_real: setup_mipsel: setup_mipsel_none setup_mipsel_real setup_mipsel_none: setup_mipsel_none_4kc-malta setup_mipsel_none_5kc-malta setup_mipsel_none_loongson-3 setup_mipsel_none_octeon setup_mipsel_none_real setup_mipsel_none_4kc-malta: setup_mipsel_none_4kc-malta_real setup_mipsel_none_4kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='4kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-4kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips32r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-4kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-4kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mipsel_none_5kc-malta: setup_mipsel_none_5kc-malta_real setup_mipsel_none_5kc-malta_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='5kc-malta' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-5kc-malta' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.malta debian/config/kernelarch-mips/config.mips64r2' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-5kc-malta' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-5kc-malta' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mipsel_none_loongson-3: setup_mipsel_none_loongson-3_real setup_mipsel_none_loongson-3_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='loongson-3' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-loongson-3' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.loongson-3' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-loongson-3' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-loongson-3' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mipsel_none_octeon: setup_mipsel_none_octeon_real setup_mipsel_none_octeon_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='mipsel' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='octeon' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-octeon' KCONFIG='debian/config/config debian/config/kernelarch-mips/config debian/config/mipsel/config debian/config/kernelarch-mips/config.octeon' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='mips' LOCALVERSION='-octeon' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-octeon' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_mipsel_none_real: setup_mipsel_real: setup_mipsn32: setup_mipsn32_real @@ -749,33 +749,33 @@ setup_powerpc_none_powerpc: setup_powerpc_none_powerpc_real setup_powerpc_none_powerpc-smp: setup_powerpc_none_powerpc-smp_real setup_powerpc_none_powerpc-smp_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc-smp' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-smp' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc debian/config/powerpc/config.powerpc-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_powerpc_none_powerpc64: setup_powerpc_none_powerpc64_real setup_powerpc_none_powerpc64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_powerpc_none_powerpc_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpc' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpc/config.powerpc' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_powerpc_none_real: setup_powerpc_real: setup_powerpcspe: setup_powerpcspe_none setup_powerpcspe_real setup_powerpcspe_none: setup_powerpcspe_none_powerpcspe setup_powerpcspe_none_real setup_powerpcspe_none_powerpcspe: setup_powerpcspe_none_powerpcspe_real setup_powerpcspe_none_powerpcspe_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='powerpcspe' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpcspe' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpcspe' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/powerpcspe/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpcspe' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpcspe' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_powerpcspe_none_real: setup_powerpcspe_real: setup_ppc64: setup_ppc64_none setup_ppc64_real setup_ppc64_none: setup_ppc64_none_powerpc64 setup_ppc64_none_real setup_ppc64_none_powerpc64: setup_ppc64_none_powerpc64_real setup_ppc64_none_powerpc64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-be' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_ppc64_none_real: setup_ppc64_real: setup_ppc64el: setup_ppc64el_none setup_ppc64el_real setup_ppc64el_none: setup_ppc64el_none_powerpc64le setup_ppc64el_none_real setup_ppc64el_none_powerpc64le: setup_ppc64el_none_powerpc64le_real setup_ppc64el_none_powerpc64le_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le-unsigned' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='ppc64el' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='powerpc64le' IMAGE_FILE='vmlinux' IMAGE_INSTALL_STEM='vmlinux' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-powerpc64le' KCONFIG='debian/config/config debian/config/kernelarch-powerpc/config debian/config/kernelarch-powerpc/config-arch-64 debian/config/kernelarch-powerpc/config-arch-64-le' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='powerpc' LOCALVERSION='-powerpc64le' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-powerpc64le' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_ppc64el_none_real: setup_ppc64el_real: setup_rt: setup_rt_real @@ -787,7 +787,7 @@ setup_s390x_none_real: setup_s390x_none_s390x: setup_s390x_none_s390x_real setup_s390x_none_s390x_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x-unsigned' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y -o MODULE_SIG=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='s390x' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='s390x' IMAGE_FILE='arch/s390/boot/image' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-s390x' KCONFIG='debian/config/config debian/config/s390x/config' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='s390' LOCALVERSION='-s390x' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-s390x' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VDSO='True' VERSION='4.9' setup_s390x_real: setup_sh3: setup_sh3_real setup_sh3_real: @@ -796,10 +796,10 @@ setup_sh4_none_real: setup_sh4_none_sh7751r: setup_sh4_none_sh7751r_real setup_sh4_none_sh7751r_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7751r' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7751r' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7751r' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7751r' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7751r' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_sh4_none_sh7785lcr: setup_sh4_none_sh7785lcr_real setup_sh4_none_sh7785lcr_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sh4' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sh7785lcr' IMAGE_FILE='arch/sh/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sh7785lcr' KCONFIG='debian/config/config debian/config/sh4/config debian/config/sh4/config.sh7785lcr' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sh' LOCALVERSION='-sh7785lcr' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sh7785lcr' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_sh4_real: setup_sparc: setup_sparc_real setup_sparc64: setup_sparc64_none setup_sparc64_real @@ -808,9 +808,9 @@ setup_sparc64_none_sparc64: setup_sparc64_none_sparc64_real setup_sparc64_none_sparc64-smp: setup_sparc64_none_sparc64-smp_real setup_sparc64_none_sparc64-smp_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64-smp' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64-smp' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-smp' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64-smp' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64-smp' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_sparc64_none_sparc64_real:: - $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-6' DEBUG='True' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real setup-arch-flavour ABINAME='4.9.0-2' ARCH='sparc64' COMPILER='gcc-4.9' DEBUG='True' DO_LIBC='False' FEATURESET='none' FLAVOUR='sparc64' IMAGE_FILE='arch/sparc/boot/zImage' IMAGE_INSTALL_STEM='vmlinuz' IMAGE_PACKAGE_NAME='linux-image-4.9.0-2-sparc64' KCONFIG='debian/config/config debian/config/kernelarch-sparc/config debian/config/kernelarch-sparc/config-up' KCONFIG_OPTIONS=' -o DEBUG_INFO=y' KERNEL_ARCH='sparc' LOCALVERSION='-sparc64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-sparc64' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' setup_sparc64_real: setup_sparc_real: setup_tilegx: setup_tilegx_real @@ -820,7 +820,7 @@ source: source_none source_rt source_none: source_none_real source_none_real:: - $(MAKE) -f debian/rules.real source-featureset ABINAME='4.9.0-2' FEATURESET='none' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real source-featureset ABINAME='4.9.0-2' FEATURESET='none' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' source_rt: source_rt_real source_rt_real:: - $(MAKE) -f debian/rules.real source-featureset ABINAME='4.9.0-2' FEATURESET='rt' SOURCEVERSION='4.9.13-1' UPSTREAMVERSION='4.9' VERSION='4.9' + $(MAKE) -f debian/rules.real source-featureset ABINAME='4.9.0-2' FEATURESET='rt' SOURCEVERSION='4.9.13-1+rpi1' UPSTREAMVERSION='4.9' VERSION='4.9' diff -Nru linux-4.9.13/debian/rules.real linux-4.9-4.9.13/debian/rules.real --- linux-4.9.13/debian/rules.real 2017-02-17 17:37:13.000000000 +0000 +++ linux-4.9-4.9.13/debian/rules.real 2017-03-12 01:46:17.000000000 +0000 @@ -187,6 +187,8 @@ $(STAMPS_DIR)/build_$(ARCH)_$(FEATURESET)_$(FLAVOUR): +$(MAKE_CLEAN) -C '$(DIR)' $(BUILD_TARGET) + chmod 755 scripts/mkknlimg + scripts/mkknlimg '$(DIR)/arch/arm/boot/zImage' '$(DIR)/arch/arm/boot/zImagerpdt' debian/bin/buildcheck.py $(DIR) $(ARCH) $(FEATURESET) $(FLAVOUR) @$(stamp) diff -Nru linux-4.9.13/debian/splitseries.php linux-4.9-4.9.13/debian/splitseries.php --- linux-4.9.13/debian/splitseries.php 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/splitseries.php 2017-03-12 01:46:17.000000000 +0000 @@ -0,0 +1,22 @@ +#!/usr/bin/php + \ No newline at end of file diff -Nru linux-4.9.13/debian/templates/control.source.in linux-4.9-4.9.13/debian/templates/control.source.in --- linux-4.9.13/debian/templates/control.source.in 2017-02-17 17:37:13.000000000 +0000 +++ linux-4.9-4.9.13/debian/templates/control.source.in 2017-03-12 01:46:17.000000000 +0000 @@ -4,7 +4,7 @@ Uploaders: Bastian Blank , maximilian attems , Ben Hutchings , Salvatore Bonaccorso Standards-Version: 3.9.8 Build-Depends: - debhelper (>= 10.1~), dh-exec, + debhelper, dh-exec, # used to run debian/bin/*.py python3:any, # used by debian/rules.real to prepare the source @@ -26,16 +26,16 @@ # not have M-A: allowed but need unqualified name for newer versions openssl (>= 1.1.0-1~) | openssl:native , # used by upstream to build perf documentation - asciidoc-base | asciidoc , + asciidoc | asciidoc-base , xmlto , # used by upstream to build perf bison , # - flex needs to run on the host; we have the same problem as for openssl - flex (>= 2.6.1-1.1~) | flex:native , + flex | flex:native , gcc-multilib [amd64 ppc64 s390x sparc64] , libaudit-dev , - libbabeltrace-dev (>= 1.5.0) , - libbabeltrace-ctf-dev (>= 1.5.0) , + libbabeltrace-dev , + libbabeltrace-ctf-dev , libdw-dev , libelf-dev , libiberty-dev , diff -Nru linux-4.9.13/debian/templates/image.postinst.in linux-4.9-4.9.13/debian/templates/image.postinst.in --- linux-4.9.13/debian/templates/image.postinst.in 2016-09-30 19:54:40.000000000 +0000 +++ linux-4.9-4.9.13/debian/templates/image.postinst.in 2017-03-12 01:46:17.000000000 +0000 @@ -2,11 +2,16 @@ version=@abiname@@localversion@ image_path=/boot/@image-stem@-$version +kimage=@image-stem@ if [ "$1" != configure ]; then exit 0 fi +dpkg-divert --package rpikernelhack --remove --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/config-$version +dpkg-divert --package rpikernelhack --remove --rename /boot/System.map-$version + depmod $version if [ -f /lib/modules/$version/.fresh-install ]; then diff -Nru linux-4.9.13/debian/templates/image.preinst.in linux-4.9-4.9.13/debian/templates/image.preinst.in --- linux-4.9.13/debian/templates/image.preinst.in 2016-09-30 19:54:40.000000000 +0000 +++ linux-4.9-4.9.13/debian/templates/image.preinst.in 2017-03-12 01:46:17.000000000 +0000 @@ -2,6 +2,7 @@ version=@abiname@@localversion@ image_path=/boot/@image-stem@-$version +kimage=@image-stem@ if [ "$1" = abort-upgrade ]; then exit 0 @@ -18,4 +19,10 @@ --arg=$image_path /etc/kernel/preinst.d fi +# Rpi diversion hack +mkdir -p /usr/share/rpikernelhack +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/$kimage-$version --rename /boot/$kimage-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/config-$version --rename /boot/config-$version +dpkg-divert --package rpikernelhack --divert /usr/share/rpikernelhack/System.map-$version --rename /boot/System.map-$version + exit 0 diff -Nru linux-4.9.13/debian/tests/control linux-4.9-4.9.13/debian/tests/control --- linux-4.9.13/debian/tests/control 2017-02-27 15:58:07.000000000 +0000 +++ linux-4.9-4.9.13/debian/tests/control 2017-03-12 01:46:17.000000000 +0000 @@ -1,5 +1,5 @@ Tests: selftests Restrictions: breaks-testbed, needs-root, isolation-machine -Depends: kexec-tools, python3, gcc, make, libpopt-dev, gcc-multilib [amd64], bc, fuse, libfuse-dev, pkg-config, linux-image-4.9.0-2-alpha-generic [alpha], linux-image-4.9.0-2-alpha-smp [alpha], linux-image-4.9.0-2-amd64-unsigned [amd64], linux-image-4.9.0-2-rt-amd64-unsigned [amd64], linux-image-4.9.0-2-arm64-unsigned [arm64], linux-image-4.9.0-2-marvell [armel], linux-image-4.9.0-2-armmp-unsigned [armhf], linux-image-4.9.0-2-armmp-lpae-unsigned [armhf], linux-image-4.9.0-2-parisc [hppa], linux-image-4.9.0-2-parisc64-smp [hppa], linux-image-4.9.0-2-686-unsigned [i386], linux-image-4.9.0-2-686-pae-unsigned [i386], linux-image-4.9.0-2-rt-686-pae-unsigned [i386], linux-image-4.9.0-2-m68k [m68k], linux-image-4.9.0-2-4kc-malta [mips mipsel], linux-image-4.9.0-2-5kc-malta [mips mipsel mips64 mips64el], linux-image-4.9.0-2-octeon [mips mipsel mips64 mips64el], linux-image-4.9.0-2-loongson-3 [mipsel mips64el], linux-image-4.9.0-2-powerpc-unsigned [powerpc], linux-image-4.9.0-2-powerpc-smp-unsigned [powerpc], linux-image-4.9.0-2-powerpc64-unsigned [powerpc], linux-image-4.9.0-2-powerpcspe [powerpcspe], linux-image-4.9.0-2-powerpc64 [ppc64], linux-image-4.9.0-2-powerpc64le-unsigned [ppc64el], linux-image-4.9.0-2-s390x-unsigned [s390x], linux-image-4.9.0-2-sh7751r [sh4], linux-image-4.9.0-2-sh7785lcr [sh4], linux-image-4.9.0-2-sparc64 [sparc64], linux-image-4.9.0-2-sparc64-smp [sparc64] +Depends: kexec-tools, python3, gcc, make, libpopt-dev, gcc-multilib [amd64], bc, fuse, libfuse-dev, pkg-config, linux-image-4.9.0-2-alpha-generic [alpha], linux-image-4.9.0-2-alpha-smp [alpha], linux-image-4.9.0-2-amd64 [amd64], linux-image-4.9.0-2-rt-amd64 [amd64], linux-image-4.9.0-2-arm64 [arm64], linux-image-4.9.0-2-marvell [armel], linux-image-4.9.0-2-rpi [armhf], linux-image-4.9.0-2-rpi2 [armhf], linux-image-4.9.0-2-parisc [hppa], linux-image-4.9.0-2-parisc64-smp [hppa], linux-image-4.9.0-2-686 [i386], linux-image-4.9.0-2-686-pae [i386], linux-image-4.9.0-2-rt-686-pae [i386], linux-image-4.9.0-2-m68k [m68k], linux-image-4.9.0-2-4kc-malta [mips mipsel], linux-image-4.9.0-2-5kc-malta [mips mipsel mips64 mips64el], linux-image-4.9.0-2-octeon [mips mipsel mips64 mips64el], linux-image-4.9.0-2-loongson-3 [mipsel mips64el], linux-image-4.9.0-2-powerpc [powerpc], linux-image-4.9.0-2-powerpc-smp [powerpc], linux-image-4.9.0-2-powerpc64 [powerpc ppc64], linux-image-4.9.0-2-powerpcspe [powerpcspe], linux-image-4.9.0-2-powerpc64le [ppc64el], linux-image-4.9.0-2-s390x [s390x], linux-image-4.9.0-2-sh7751r [sh4], linux-image-4.9.0-2-sh7785lcr [sh4], linux-image-4.9.0-2-sparc64 [sparc64], linux-image-4.9.0-2-sparc64-smp [sparc64] Classes: smp diff -Nru linux-4.9.13/debian/update-rpi-patches linux-4.9-4.9.13/debian/update-rpi-patches --- linux-4.9.13/debian/update-rpi-patches 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/update-rpi-patches 2017-03-12 01:46:17.000000000 +0000 @@ -0,0 +1,119 @@ +#!/bin/bash -ev + +#note: useful filterdiff command when bringing stuff forward +#filterdiff -p1 -xdebian/patches/rpi/* -x*.postinst -x*.preinst -x*.prerm -x*.postrm -x*/config.defines.dump -xdebian/control.md5sum -xdebian/*.templates -xdebian/po/*.po -xdebian/rules.gen linux-3.18.debdiff > linux-3.18.debdiff.filtered + +set -x +set -e +debdir=`pwd` +upstream_tag=v4.4.6 +rpi_branch=rpi-4.4.y +#rpi_tree=rpi/${rpi_branch} +rpi_tree=af9619cc3b0e8f8dc1cb2aebe4c95c86d41d90e9 +patch_dir=${debdir}/debian/patches +rpi_patches=${patch_dir}/rpi +upstream_gitrepo=git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git +#canonical git repo for ckt "upstream" releases +#upstream_gitrepo=git://kernel.ubuntu.com/ubuntu/linux.git + +#make a backup of the quilt series so the user can restore it if this script fails +cp debian/patches/series debian/patches/series.bak + +export QUILT_PATCHES=debian/patches +quilt pop -a || [ $? == 2 ] + + # add rempote repositories, and update (needs a around 500M) +rm -rf linuxgit +git clone -o linux-stable --reference ../linuxgit ${upstream_gitrepo} linuxgit + +cd linuxgit +git remote add rpi https://github.com/raspberrypi/linux.git +git remote update + + # create branch from tag and switch to it +git checkout -b target-version ${upstream_tag} + +# record commits used to base patches on +git show ${upstream_tag} > ../debian/upstream-tag-used-to-generate-rpi-patches +git show ${rpi_tree} > ../debian/rpi-branch + +# merge the changes from the rpi branch +git merge --no-edit ${rpi_tree} + +# get a list of commits not present upstream +git_commits=$(git cherry ${upstream_tag} | awk '/^\+/{print $2}') + +# Remove commit a5f196ca90a717c0c40c33c4ca815c6c606d19c2, it seems to already be applied in the debian "upstream" source. + +git_commits=`echo ${git_commits} | sed s/a5f196ca90a717c0c40c33c4ca815c6c606d19c2//` + +# generate one patch per commit, including comments, with an ordered sequence +# to preserve patch ordering. +i=1000 +rm -rf ${rpi_patches} +mkdir -p ${rpi_patches} +for c in $git_commits ; do + git show ${c} > ${rpi_patches}/rpi_${i}_${c}.patch + # include dummy file in patch to ensure it has some content even after later processing (empty patches upset quilt) + #dummy functionality disabled for now, hopefully we won't need it with 3.12 + #dummy functionality reenabled, seems we do need it with current 3.18 + cat ../debian/patches/dummytemplate.diff | sed s/PATCHNAME/rpi_${i}_${c}/ >> ${rpi_patches}/rpi_${i}_${c}.patch + i=$((${i}+1)) +done + +#pipe the output of git diff through filterdiff as it seems to confuse interdiff otherwise +git diff ${upstream_tag} | filterdiff > ../merged.diff +export QUILT_PATCHES=../debian/patches + +# split quilt series and remove pi patches +cd .. +chmod 755 debian/splitseries.php +debian/splitseries.php +cd linuxgit + +# create new quilt series, use just the new series for now for testing +ls ${rpi_patches} | sed s_^_rpi/_ > ${patch_dir}/series.fromgit +cp ${patch_dir}/series.fromgit ${patch_dir}/series + +git reset --hard ${upstream_tag} +cd .. + +rm -rf linuxtest linuxclean + +rsync -a --exclude .git linuxgit/ linuxtest/ +cp -al linuxgit linuxclean +rm -rf linuxclean/.git + +cd linuxtest +export QUILT_PATCHES=../debian/patches +quilt push -a || true +while quilt push -f || [ $? == 1 ]; do + quilt refresh + quilt push -a || true +done +cd .. + +diff -urN linuxclean linuxtest | filterdiff -p1 -x '.pc/*' -x 'dummy/*' --clean > patched.diff || [ $? == 1 ] +echo 'this patch contains changes that the system could not split out into individual patches' > debian/patches/rpi/rpi_9999_other_changes.patch +interdiff -p1 patched.diff merged.diff | filterdiff -x '*.rej' --clean >> debian/patches/rpi/rpi_9999_other_changes.patch +cat debian/dummy.patch >> debian/patches/rpi/rpi_9999_other_changes.patch +echo rpi/rpi_9999_other_changes.patch >> ${patch_dir}/series.fromgit + +#reassemble full quilt series +cat ${patch_dir}/series.prefix ${patch_dir}/series.fromgit ${patch_dir}/series.suffix > ${patch_dir}/series + + + +export QUILT_PATCHES=debian/patches +quilt push -a --fuzz 0 || true +while quilt push; do + quilt refresh + quilt push -a --fuzz 0 || true +done + +rm -rf linuxgit linuxclean linuxtest +rm merged.diff patched.diff +rm debian/patches/series.* + +echo finished sucessfully + diff -Nru linux-4.9.13/debian/upstream-tag-used-to-generate-rpi-patches linux-4.9-4.9.13/debian/upstream-tag-used-to-generate-rpi-patches --- linux-4.9.13/debian/upstream-tag-used-to-generate-rpi-patches 1970-01-01 00:00:00.000000000 +0000 +++ linux-4.9-4.9.13/debian/upstream-tag-used-to-generate-rpi-patches 2017-03-12 01:46:17.000000000 +0000 @@ -0,0 +1,41 @@ +tag v4.4.6 +Tagger: Greg Kroah-Hartman +Date: Wed Mar 16 08:43:22 2016 -0700 + +This is the 4.4.6 stable release +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v2 + +iQIcBAABCAAGBQJW6X8aAAoJEDjbvchgkmk+/bgQALZchnUrYj/ymJso8wVZtgsa +nABO00RX/czIDsoOxCSkMTD1tm1SbCiC0h5xyFiFOgE93f0UYj1l7cDre75+fPHt +RrMLLYY0FdYAGnxV18xQvUo9O+bQipEGflBVZ8c1tcQKgXhw4ENaXmm1YCCAaMl0 +ugSTMTINK8MHNL8nMR5z/gjhl7Xsp9rOZa40JgXujLGLAZeDC/VSFQ5OAFOWs423 +vtybKmJwFscmhIrQc2VGnAhfujCPyXu0TaELaIFEgE/whsicwtps6UBP45o7IfrJ +6j+n0w4Otp0M9XRKwNy14M2fnfWKAeNQRmSxnx94Sek1z9uniABsE2AvnaidzKUw +j82V8FRFb4NVVXTwaLu9r/8ESW8Ly8YPzBAknfiFFWGiuATM4kQavqhcuwE17A+a +G0wBS9SaJ5bxQemCgS1fKNbo6Nf/XuIoJfoWw7Qx0c8AWVvanKOVGSgXUZD9SJ2m +IKiGBpSJxpwORkuOqD6/KK8kTSa0ymnPkAHZhztNdvj+yz/kSKaGC3+vD8Kckx12 +XGJBg3d3imbu9z03NcsfCOPraA14bLGoj7P6IaCxO7FAQ94cdn2JmnigYdM3r+gS +2skfu10RpuhLvMl2zkpm0gK4wok1zUaQFZu71bTyUI9DsX7twtbb6qD4DL2gGOE9 +8tM2FTmKVMGajl718dBr +=bg6l +-----END PGP SIGNATURE----- + +commit 0d1912303e54ed1b2a371be0bba51c384dd57326 +Author: Greg Kroah-Hartman +Date: Wed Mar 16 08:43:17 2016 -0700 + + Linux 4.4.6 + +diff --git a/Makefile b/Makefile +index d13322a..87d12b4 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,6 +1,6 @@ + VERSION = 4 + PATCHLEVEL = 4 +-SUBLEVEL = 5 ++SUBLEVEL = 6 + EXTRAVERSION = + NAME = Blurry Fish Butt +